From nobody Sun Feb 8 18:30:50 2026 Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 11B0F36F40C for ; Fri, 30 Jan 2026 11:55:13 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=205.220.168.131 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1769774117; cv=none; b=OLy75VbYoiovFCHuj2R2LY7ZDzSLgac3sJ0/h3xZSL/NBMT0liW/YdsbZx7Cs8wvizacXxb28+fMiSBSq+zSqgjcOXiuaKDDaAQro0WAzLUT6C0HVgSd3VDSWrqbtn79EcqG1fAcaBm01SUSSqNuR0ZdroGYxLEludBF73Z53cQ= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1769774117; c=relaxed/simple; bh=paU7ee1DztoKRgyHORWjgOxfdoVagM67Kh861L1K6FA=; h=From:To:Cc:Subject:Date:Message-Id:In-Reply-To:References: MIME-Version; b=QRA7gy432FlhwmfiU1e8/CdneJ/ahzujv7MgqYpcC+4XMEfgpYDhfhP7ecdIOnNYP/XWHa+Dn+kMB+jJ26rK7oOIUJH69ukiFAlcAV9rUXf8FK9ePvr8hkNP1GJO+NKDApzSpDDsx5hx9u+7UwhgdFbEuZ0UnUYNlbwAvLL5lNw= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=oss.qualcomm.com; spf=pass smtp.mailfrom=oss.qualcomm.com; dkim=pass (2048-bit key) header.d=qualcomm.com header.i=@qualcomm.com header.b=Nw4CCPw4; dkim=pass (2048-bit key) header.d=oss.qualcomm.com header.i=@oss.qualcomm.com header.b=SvyK6SbP; arc=none smtp.client-ip=205.220.168.131 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=oss.qualcomm.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=oss.qualcomm.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=qualcomm.com header.i=@qualcomm.com header.b="Nw4CCPw4"; dkim=pass (2048-bit key) header.d=oss.qualcomm.com header.i=@oss.qualcomm.com header.b="SvyK6SbP" Received: from pps.filterd (m0279863.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.18.1.11/8.18.1.11) with ESMTP id 60U4bZJH1485466 for ; Fri, 30 Jan 2026 11:55:13 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=qualcomm.com; h= cc:content-transfer-encoding:date:from:in-reply-to:message-id :mime-version:references:subject:to; s=qcppdkim1; bh=CrKePOeV2uU tnBbmOpIfK+3XWHgrGvk5mYIvXcAB8F8=; b=Nw4CCPw4HaeStOIGB/jhuBHGE58 R6fkYOiiwNabjzuVTQZHEc/9vkCXiEzCToxtrLiSeZ0XgSdzJaymBPoZY5NtIAWa qBKR0YhhG9mZf+SQek2Qm80fnuwlksDJIOIsqWXv0t1DoAzPUM/awvGbCD4aDey6 +n5liGuRI9KXDcE247e6dIIIbYSwhMNnRl7P6P4ZdVLVhrZm7GEbORvsm+Wu6mZ0 OnQtFtb8cLW/h1W+KSz1R3fEtKJjJLvNn3Q5HYH4bp0dysV7IiYvKKYFbU7OYtlZ Ti+f0qS7DLEjGduws4nSb8KNwOmqDW8CNmt0WmLtljiq886zDHDEItf2Wag== Received: from mail-pj1-f70.google.com (mail-pj1-f70.google.com [209.85.216.70]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 4c0nsf97qb-1 (version=TLSv1.3 cipher=TLS_AES_128_GCM_SHA256 bits=128 verify=NOT) for ; Fri, 30 Jan 2026 11:55:13 +0000 (GMT) Received: by mail-pj1-f70.google.com with SMTP id 98e67ed59e1d1-34ab459c051so3859100a91.0 for ; Fri, 30 Jan 2026 03:55:13 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=oss.qualcomm.com; s=google; t=1769774113; x=1770378913; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=CrKePOeV2uUtnBbmOpIfK+3XWHgrGvk5mYIvXcAB8F8=; b=SvyK6SbPcAiOvlJWu4wPNzS6cMYsXPUWNG/SJR2deuuBOeLz7MZWZMXRbc/qh3BksR EbPQ304ef6kYNwe1AcRvIDxm/KD+DuZJKx+osj9dZFMK2gyODd+p6u2LYlsiptft3+ba l2UigjhJ8q7CnWRex3O6Kamvk7hULgDWLeT9SElbvzqgagNeml95it3tdmWYje5EIENG MCQnMh/5tvVdBEP4qeOiv843im1biPcTZt4dPaV4XnKF/MBZXEHxIXZxRd2YAKh2o0tp KH/UbE/W8wMaldO1DPWZhToChakgf3n1UV3aQWxysukGgfbBV3K34wWYNHbn3xk30nCL hZcA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1769774113; x=1770378913; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-gg:x-gm-message-state:from :to:cc:subject:date:message-id:reply-to; bh=CrKePOeV2uUtnBbmOpIfK+3XWHgrGvk5mYIvXcAB8F8=; b=WtAaPg9DwcrJGaw66wBcYIWSWKOmaFGxDjPt3Ge+V3PuZa7BaNqUSDmk+jI9UJkjrh 2HUQ+B5GaWCuGxSwQK8SKvvAcyf73TX29o0fEIyywGI+6Q77O7PfvpQtr9NfGZLSTxsS hh7oceXjVa/HHI6bm0cV1NIRxICuAxJjckUv68uzjn/9rqnA7wmJuxR9VbQqQ1/ruQsl G6fNLZtWRA50iDVHCkI+i0VjzHRk7YdCEg5fg6jR6/rEGfnp0GN0QWd4Q9ANr/mflDHq P0MNxxXlniczxCuhRBSEOlWwFqQN6VybVGaymPkyccdTss/dKBbD0MuYCAtXxAcOLGo/ mzoQ== X-Forwarded-Encrypted: i=1; AJvYcCVJ6CKnCvHcbvNbClU5e41o/yAvJy5wmXimj1lRnXvVarRd50eTT6ZZxQ36ih4xaasCNXbRxAeo94+soI0=@vger.kernel.org X-Gm-Message-State: AOJu0Yw9Cu5ntkqiC2iZpsdyXgvswQMsMRIoSNSVp8ARPJKFAhhfZFEC iQYWUqHHk3tQQh5BVwX6lPCBGEkFF9V8GHNx44xIAn4BWIpW67e6gBjrbff8X4CMsScjy8EWiyy ReEHQgki06fD8RljLwpqXLFh4+EV14hpLHgUCb1F6PpTdVP4yxtH9Am4oo/LX7mfsszg= X-Gm-Gg: AZuq6aKUyar8CcxbETEVMcXIE6ZAk7FVnmiwYliEgUwQ+tCbcI12FtCZzito+qFEGw0 RP2cpy9rAkclcDoynapsRRJPVM4Bd3OwpvC1dENwy9hSU0RTaZ3jsXAmzz113WUjPVKsa8/zNE9 BXMCuArLojLSaFI0jUa+evscr18PB/gUUeCdyVhooAq90sSvNA0YdG1Khh/vzhgptQtHX7dYyx1 X5sSzE+EwQis+/i/lIUIe8Jtv+JqtGT3j+Yd4ZVgrcxhjRXX9ISFFlN9ivgLaxTknV+2F7FypYl BkUUNA5gZ1PexRVGzWtHue3w/idlA0CLTK4PPm74ppFFUliDgx6bPnfovle4XENHZRhQTp80FyT E+0pfN2+Dr6Rvqx5m4g2DUHkWfSpMTt+2Kv1cZXEB8TCX X-Received: by 2002:a05:6a20:6a0c:b0:390:ca32:da2c with SMTP id adf61e73a8af0-392e0054779mr2654313637.24.1769774112229; Fri, 30 Jan 2026 03:55:12 -0800 (PST) X-Received: by 2002:a05:6a20:6a0c:b0:390:ca32:da2c with SMTP id adf61e73a8af0-392e0054779mr2654289637.24.1769774111635; Fri, 30 Jan 2026 03:55:11 -0800 (PST) Received: from hu-jprakash-hyd.qualcomm.com ([202.46.22.19]) by smtp.gmail.com with ESMTPSA id 98e67ed59e1d1-3540f2f24ccsm10431278a91.8.2026.01.30.03.55.03 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 30 Jan 2026 03:55:11 -0800 (PST) From: Jishnu Prakash To: jic23@kernel.org, robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org, agross@kernel.org, andersson@kernel.org, lumag@kernel.org, dmitry.baryshkov@oss.qualcomm.com, konradybcio@kernel.org, daniel.lezcano@linaro.org, sboyd@kernel.org, amitk@kernel.org, thara.gopinath@gmail.com, lee@kernel.org, rafael@kernel.org, subbaraman.narayanamurthy@oss.qualcomm.com, david.collins@oss.qualcomm.com, anjelique.melendez@oss.qualcomm.com, kamal.wadhwa@oss.qualcomm.com Cc: rui.zhang@intel.com, lukasz.luba@arm.com, devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org, cros-qcom-dts-watchers@chromium.org, jishnu.prakash@oss.qualcomm.com, quic_kotarake@quicinc.com, neil.armstrong@linaro.org, stephan.gerhold@linaro.org Subject: [PATCH V10 4/4] thermal: qcom: add support for PMIC5 Gen3 ADC thermal monitoring Date: Fri, 30 Jan 2026 17:24:21 +0530 Message-Id: <20260130115421.2197892-5-jishnu.prakash@oss.qualcomm.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20260130115421.2197892-1-jishnu.prakash@oss.qualcomm.com> References: <20260130115421.2197892-1-jishnu.prakash@oss.qualcomm.com> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable X-Proofpoint-ORIG-GUID: 3JqEtNv690tZed_tWEk8_nOEtanTLV2d X-Authority-Analysis: v=2.4 cv=EvjfbCcA c=1 sm=1 tr=0 ts=697c9c21 cx=c_pps a=0uOsjrqzRL749jD1oC5vDA==:117 a=fChuTYTh2wq5r3m49p7fHw==:17 a=vUbySO9Y5rIA:10 a=s4-Qcg_JpJYA:10 a=VkNPw1HP01LnGYTKEx00:22 a=EUspDBNiAAAA:8 a=hpoCfrBzasziBmgo1UAA:9 a=mQ_c8vxmzFEMiUWkPHU9:22 X-Proofpoint-GUID: 3JqEtNv690tZed_tWEk8_nOEtanTLV2d X-Proofpoint-Spam-Details-Enc: AW1haW4tMjYwMTMwMDA5NyBTYWx0ZWRfX/g9IOuAX8eHz Ep9CIdk4Uj+Auw4LIvm5WWkC+hysfO6X9at+NHBPyIwo4ACacA2cAs42P5gpKalicQTd6k7PMcf lEP2fkjKmc4GuUsJUYM7To9h7xonylqpz9+AdrwFF1s4P3nlLGEGFAFVHoo6PMo0BO5WK6fdYZm RtbPf9Og0JUHXQInQg49sT51nXErCxHOP4Q6WfBBpf6P3YdDAS+bd8fE5AofMJ1kWuolvRQfZKV IV8LUrv2ACALHhSkZbFE+yblWAwlSkyyULMI//ttqC1+8zyqhtso56TXqjceM17yz9wpXq5+w6g l2izIUXqGUaJI62ru9tppP3VMjG530bGdGInhezMQf9UG6zxdCh7zR3bteZWujIwVDsro/ipCDk c/WsNYIZ3F1ULdxrUClDwUZu6dpQNs163OKK72uJEpoyNq+MklHgWgbi+K2i/uy0z219PC+oZ5L Q03fmxa4hObY56HPJ0Q== X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.293,Aquarius:18.0.1121,Hydra:6.1.51,FMLib:17.12.100.49 definitions=2026-01-30_01,2026-01-29_01,2025-10-01_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 clxscore=1015 spamscore=0 priorityscore=1501 bulkscore=0 suspectscore=0 adultscore=0 malwarescore=0 impostorscore=0 lowpriorityscore=0 phishscore=0 classifier=typeunknown authscore=0 authtc= authcc= route=outbound adjust=0 reason=mlx scancount=1 engine=8.22.0-2601150000 definitions=main-2601300097 Content-Type: text/plain; charset="utf-8" Add support for ADC_TM part of PMIC5 Gen3. This is an auxiliary driver under the Gen3 ADC driver, which implements the threshold setting and interrupt generating functionalities of QCOM ADC_TM drivers, used to support thermal trip points. Signed-off-by: Jishnu Prakash Reviewed-by: Jonathan Cameron --- Changes since v9: - Replaced the break statement within scoped_guard() in tm_handler_work() w= ith return statement to fix the error reported by kernel test robot. Changes since v8: - Made following changes to address Dmitry's comment to use module_auxiliar= y_driver(): - Dropped the wrapper struct containing the auxiliary driver (struct adc_= tm5_auxiliary_drv) which was originally meant to expose the TM interrupt callback to be ca= lled by main driver and replaced it with standalone definition of the auxiliary= _driver struct. - Added call to adc5_gen3_register_tm_event_notifier() in probe to initia= lize the TM callback for main driver. - Replaced the module_init() and module_exit() calls with module_auxiliar= y_driver(). - Made following changes to address Jonathan's comments: - Updated header files included in drivers/thermal/qcom/qcom-spmi-adc-tm5= -gen3.c to follow IWYU (include-what-you-use) principles. - Added a DEFINE_GUARD() definition for mutex lock/unlock functions and r= eplaced their existing calls with guard() and scoped_guard() statements using t= his definition. - Moved some variable declarations in tm_handler_work() to inside the for= () loop. - Fixed if() check condition for low_temp in adc_tm5_gen3_set_trip_temp(). - Dropped the wrapper function adc_tm5_gen3_disable_channel() around _adc_tm5_gen3_disable_channel() as it only calls the inner function with = no other actions. - Replaced a pr_debug() call with dev_dbg() in tm_handler_work(). Changes since v7: - Addressed following comments from Jonathan: - Replaced {0} with { } in tm_handler_work() - Simplified logic for setting upper_set and lower_set into a single line each, in tm_handler_work() - Cleaned up local variable declarations and high/low threshold check in adc_tm5_gen3_configure() - Moved cleanup action to disable all ADC_TM channels to probe end and added comment to describe it. - Fixed { } formatting in adctm5_auxiliary_id_table[]. Changes since v6: - Addressed following comments from Jonathan: - Added error check for devm_thermal_add_hwmon_sysfs() call. - Used local variable `dev` in multiple places in adc_tm5_probe(). in place of `&aux_dev->dev` and `adc_tm5->dev`. - Added a comment to explain cleanup action calling adc5_gen3_clear_work() near probe end. - Fixed return statement at probe end to return last called API's return value directly. Changes since v5: - Addressed following comments from Jonathan: - Corrected all files to follow kernel-doc formatting fully. - Cleaned up formatting in struct definitions. - Used sizeof() to specify length in register read/write calls instead of using integers directly. - Added comments in adc_tm5_probe() for skipping first SDAM for IRQ request and for usage of auxiliary_set_drvdata(). - Corrected line wrap length driver file. - Moved INIT_WORK() and auxiliary_set_drvdata() to earlier locations to ensure they are ready when needed. Changes since v4: - Fixed a compilation error and updated dependencies in config as suggested by Krzysztof. drivers/thermal/qcom/Kconfig | 9 + drivers/thermal/qcom/Makefile | 1 + drivers/thermal/qcom/qcom-spmi-adc-tm5-gen3.c | 512 ++++++++++++++++++ 3 files changed, 522 insertions(+) create mode 100644 drivers/thermal/qcom/qcom-spmi-adc-tm5-gen3.c diff --git a/drivers/thermal/qcom/Kconfig b/drivers/thermal/qcom/Kconfig index a6bb01082ec6..1acb11e4ac80 100644 --- a/drivers/thermal/qcom/Kconfig +++ b/drivers/thermal/qcom/Kconfig @@ -21,6 +21,15 @@ config QCOM_SPMI_ADC_TM5 Thermal client sets threshold temperature for both warm and cool and gets updated when a threshold is reached. =20 +config QCOM_SPMI_ADC_TM5_GEN3 + tristate "Qualcomm SPMI PMIC Thermal Monitor ADC5 Gen3" + depends on QCOM_SPMI_ADC5_GEN3 + help + This enables the auxiliary thermal driver for the ADC5 Gen3 thermal + monitoring device. It shows up as a thermal zone with multiple trip poi= nts. + Thermal client sets threshold temperature for both warm and cool and + gets updated when a threshold is reached. + config QCOM_SPMI_TEMP_ALARM tristate "Qualcomm SPMI PMIC Temperature Alarm" depends on OF && SPMI && IIO diff --git a/drivers/thermal/qcom/Makefile b/drivers/thermal/qcom/Makefile index 0fa2512042e7..828d9e7bc797 100644 --- a/drivers/thermal/qcom/Makefile +++ b/drivers/thermal/qcom/Makefile @@ -4,5 +4,6 @@ obj-$(CONFIG_QCOM_TSENS) +=3D qcom_tsens.o qcom_tsens-y +=3D tsens.o tsens-v2.o tsens-v1.o tsens-v0_1.o \ tsens-8960.o obj-$(CONFIG_QCOM_SPMI_ADC_TM5) +=3D qcom-spmi-adc-tm5.o +obj-$(CONFIG_QCOM_SPMI_ADC_TM5_GEN3) +=3D qcom-spmi-adc-tm5-gen3.o obj-$(CONFIG_QCOM_SPMI_TEMP_ALARM) +=3D qcom-spmi-temp-alarm.o obj-$(CONFIG_QCOM_LMH) +=3D lmh.o diff --git a/drivers/thermal/qcom/qcom-spmi-adc-tm5-gen3.c b/drivers/therma= l/qcom/qcom-spmi-adc-tm5-gen3.c new file mode 100644 index 000000000000..882355d6606d --- /dev/null +++ b/drivers/thermal/qcom/qcom-spmi-adc-tm5-gen3.c @@ -0,0 +1,512 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "../thermal_hwmon.h" + +struct adc_tm5_gen3_chip; + +/** + * struct adc_tm5_gen3_channel_props - ADC_TM channel structure + * @timer: time period of recurring TM measurement. + * @tm_chan_index: TM channel number used (ranging from 1-7). + * @sdam_index: SDAM on which this TM channel lies. + * @common_props: structure with common ADC channel properties. + * @high_thr_en: TM high threshold crossing detection enabled. + * @low_thr_en: TM low threshold crossing detection enabled. + * @chip: ADC TM device. + * @tzd: pointer to thermal device corresponding to TM channel. + * @last_temp: last temperature that caused threshold violation, + * or a thermal TM channel. + * @last_temp_set: indicates if last_temp is stored. + */ +struct adc_tm5_gen3_channel_props { + unsigned int timer; + unsigned int tm_chan_index; + unsigned int sdam_index; + struct adc5_channel_common_prop common_props; + bool high_thr_en; + bool low_thr_en; + struct adc_tm5_gen3_chip *chip; + struct thermal_zone_device *tzd; + int last_temp; + bool last_temp_set; +}; + +/** + * struct adc_tm5_gen3_chip - ADC Thermal Monitoring device structure + * @dev_data: Top-level ADC device data. + * @chan_props: Array of ADC_TM channel structures. + * @nchannels: number of TM channels allocated + * @dev: SPMI ADC5 Gen3 device. + * @tm_handler_work: handler for TM interrupt for threshold violation. + */ +struct adc_tm5_gen3_chip { + struct adc5_device_data *dev_data; + struct adc_tm5_gen3_channel_props *chan_props; + unsigned int nchannels; + struct device *dev; + struct work_struct tm_handler_work; +}; + +DEFINE_GUARD(adc5_gen3, struct adc_tm5_gen3_chip *, adc5_gen3_mutex_lock(_= T->dev), + adc5_gen3_mutex_unlock(_T->dev)) + +static int get_sdam_from_irq(struct adc_tm5_gen3_chip *adc_tm5, int irq) +{ + int i; + + for (i =3D 0; i < adc_tm5->dev_data->num_sdams; i++) { + if (adc_tm5->dev_data->base[i].irq =3D=3D irq) + return i; + } + return -ENOENT; +} + +static irqreturn_t adctm5_gen3_isr(int irq, void *dev_id) +{ + struct adc_tm5_gen3_chip *adc_tm5 =3D dev_id; + int ret, sdam_num; + u8 tm_status[2]; + u8 status, val; + + sdam_num =3D get_sdam_from_irq(adc_tm5, irq); + if (sdam_num < 0) { + dev_err(adc_tm5->dev, "adc irq %d not associated with an sdam\n", + irq); + return IRQ_HANDLED; + } + + ret =3D adc5_gen3_read(adc_tm5->dev_data, sdam_num, ADC5_GEN3_STATUS1, + &status, sizeof(status)); + if (ret) { + dev_err(adc_tm5->dev, "adc read status1 failed with %d\n", ret); + return IRQ_HANDLED; + } + + if (status & ADC5_GEN3_STATUS1_CONV_FAULT) { + dev_err_ratelimited(adc_tm5->dev, + "Unexpected conversion fault, status:%#x\n", + status); + val =3D ADC5_GEN3_CONV_ERR_CLR_REQ; + adc5_gen3_status_clear(adc_tm5->dev_data, sdam_num, + ADC5_GEN3_CONV_ERR_CLR, &val, 1); + return IRQ_HANDLED; + } + + ret =3D adc5_gen3_read(adc_tm5->dev_data, sdam_num, ADC5_GEN3_TM_HIGH_STS, + tm_status, sizeof(tm_status)); + if (ret) { + dev_err(adc_tm5->dev, "adc read TM status failed with %d\n", ret); + return IRQ_HANDLED; + } + + if (tm_status[0] || tm_status[1]) + schedule_work(&adc_tm5->tm_handler_work); + + dev_dbg(adc_tm5->dev, "Interrupt status:%#x, high:%#x, low:%#x\n", + status, tm_status[0], tm_status[1]); + + return IRQ_HANDLED; +} + +static int adc5_gen3_tm_status_check(struct adc_tm5_gen3_chip *adc_tm5, + int sdam_index, u8 *tm_status, u8 *buf) +{ + int ret; + + ret =3D adc5_gen3_read(adc_tm5->dev_data, sdam_index, ADC5_GEN3_TM_HIGH_S= TS, + tm_status, 2); + if (ret) { + dev_err(adc_tm5->dev, "adc read TM status failed with %d\n", ret); + return ret; + } + + ret =3D adc5_gen3_status_clear(adc_tm5->dev_data, sdam_index, ADC5_GEN3_T= M_HIGH_STS_CLR, + tm_status, 2); + if (ret) { + dev_err(adc_tm5->dev, "adc status clear conv_req failed with %d\n", + ret); + return ret; + } + + ret =3D adc5_gen3_read(adc_tm5->dev_data, sdam_index, ADC5_GEN3_CH_DATA0(= 0), + buf, 16); + if (ret) + dev_err(adc_tm5->dev, "adc read data failed with %d\n", ret); + + return ret; +} + +static void tm_handler_work(struct work_struct *work) +{ + struct adc_tm5_gen3_chip *adc_tm5 =3D container_of(work, struct adc_tm5_g= en3_chip, + tm_handler_work); + int sdam_index =3D -1; + u8 tm_status[2] =3D { }; + u8 buf[16] =3D { }; + + for (int i =3D 0; i < adc_tm5->nchannels; i++) { + struct adc_tm5_gen3_channel_props *chan_prop =3D &adc_tm5->chan_props[i]; + int offset =3D chan_prop->tm_chan_index; + bool upper_set, lower_set; + int ret, temp; + u16 code; + + scoped_guard(adc5_gen3, adc_tm5) { + if (chan_prop->sdam_index !=3D sdam_index) { + sdam_index =3D chan_prop->sdam_index; + ret =3D adc5_gen3_tm_status_check(adc_tm5, sdam_index, + tm_status, buf); + if (ret) + return; + } + + upper_set =3D ((tm_status[0] & BIT(offset)) && chan_prop->high_thr_en); + lower_set =3D ((tm_status[1] & BIT(offset)) && chan_prop->low_thr_en); + } + + if (!(upper_set || lower_set)) + continue; + + code =3D get_unaligned_le16(&buf[2 * offset]); + dev_dbg(adc_tm5->dev, "ADC_TM threshold code:%#x\n", code); + + ret =3D adc5_gen3_therm_code_to_temp(adc_tm5->dev, + &chan_prop->common_props, + code, &temp); + if (ret) { + dev_err(adc_tm5->dev, + "Invalid temperature reading, ret =3D %d, code=3D%#x\n", + ret, code); + continue; + } + + chan_prop->last_temp =3D temp; + chan_prop->last_temp_set =3D true; + thermal_zone_device_update(chan_prop->tzd, THERMAL_TRIP_VIOLATED); + } +} + +static int adc_tm5_gen3_get_temp(struct thermal_zone_device *tz, int *temp) +{ + struct adc_tm5_gen3_channel_props *prop =3D thermal_zone_device_priv(tz); + struct adc_tm5_gen3_chip *adc_tm5; + + if (!prop || !prop->chip) + return -EINVAL; + + adc_tm5 =3D prop->chip; + + if (prop->last_temp_set) { + pr_debug("last_temp: %d\n", prop->last_temp); + prop->last_temp_set =3D false; + *temp =3D prop->last_temp; + return 0; + } + + return adc5_gen3_get_scaled_reading(adc_tm5->dev, &prop->common_props, + temp); +} + +static int adc_tm5_gen3_disable_channel(struct adc_tm5_gen3_channel_props = *prop) +{ + struct adc_tm5_gen3_chip *adc_tm5 =3D prop->chip; + int ret; + u8 val; + + prop->high_thr_en =3D false; + prop->low_thr_en =3D false; + + ret =3D adc5_gen3_poll_wait_hs(adc_tm5->dev_data, prop->sdam_index); + if (ret) + return ret; + + val =3D BIT(prop->tm_chan_index); + ret =3D adc5_gen3_write(adc_tm5->dev_data, prop->sdam_index, + ADC5_GEN3_TM_HIGH_STS_CLR, &val, sizeof(val)); + if (ret) + return ret; + + val =3D MEAS_INT_DISABLE; + ret =3D adc5_gen3_write(adc_tm5->dev_data, prop->sdam_index, + ADC5_GEN3_TIMER_SEL, &val, sizeof(val)); + if (ret) + return ret; + + /* To indicate there is an actual conversion request */ + val =3D ADC5_GEN3_CHAN_CONV_REQ | prop->tm_chan_index; + ret =3D adc5_gen3_write(adc_tm5->dev_data, prop->sdam_index, + ADC5_GEN3_PERPH_CH, &val, sizeof(val)); + if (ret) + return ret; + + val =3D ADC5_GEN3_CONV_REQ_REQ; + return adc5_gen3_write(adc_tm5->dev_data, prop->sdam_index, + ADC5_GEN3_CONV_REQ, &val, sizeof(val)); +} + +#define ADC_TM5_GEN3_CONFIG_REGS 12 + +static int adc_tm5_gen3_configure(struct adc_tm5_gen3_channel_props *prop, + int low_temp, int high_temp) +{ + struct adc_tm5_gen3_chip *adc_tm5 =3D prop->chip; + u8 buf[ADC_TM5_GEN3_CONFIG_REGS]; + u8 conv_req; + u16 adc_code; + int ret; + + ret =3D adc5_gen3_poll_wait_hs(adc_tm5->dev_data, prop->sdam_index); + if (ret < 0) + return ret; + + ret =3D adc5_gen3_read(adc_tm5->dev_data, prop->sdam_index, + ADC5_GEN3_SID, buf, sizeof(buf)); + if (ret < 0) + return ret; + + /* Write SID */ + buf[0] =3D FIELD_PREP(ADC5_GEN3_SID_MASK, prop->common_props.sid); + + /* Select TM channel and indicate there is an actual conversion request */ + buf[1] =3D ADC5_GEN3_CHAN_CONV_REQ | prop->tm_chan_index; + + buf[2] =3D prop->timer; + + /* Digital param selection */ + adc5_gen3_update_dig_param(&prop->common_props, &buf[3]); + + /* Update fast average sample value */ + buf[4] &=3D ~ADC5_GEN3_FAST_AVG_CTL_SAMPLES_MASK; + buf[4] |=3D prop->common_props.avg_samples | ADC5_GEN3_FAST_AVG_CTL_EN; + + /* Select ADC channel */ + buf[5] =3D prop->common_props.channel; + + /* Select HW settle delay for channel */ + buf[6] =3D FIELD_PREP(ADC5_GEN3_HW_SETTLE_DELAY_MASK, + prop->common_props.hw_settle_time_us); + + /* High temperature corresponds to low voltage threshold */ + prop->low_thr_en =3D (high_temp !=3D INT_MAX); + if (prop->low_thr_en) { + adc_code =3D qcom_adc_tm5_gen2_temp_res_scale(high_temp); + put_unaligned_le16(adc_code, &buf[8]); + } + + /* Low temperature corresponds to high voltage threshold */ + prop->high_thr_en =3D (low_temp !=3D -INT_MAX); + if (prop->high_thr_en) { + adc_code =3D qcom_adc_tm5_gen2_temp_res_scale(low_temp); + put_unaligned_le16(adc_code, &buf[10]); + } + + buf[7] =3D 0; + if (prop->high_thr_en) + buf[7] |=3D ADC5_GEN3_HIGH_THR_INT_EN; + if (prop->low_thr_en) + buf[7] |=3D ADC5_GEN3_LOW_THR_INT_EN; + + ret =3D adc5_gen3_write(adc_tm5->dev_data, prop->sdam_index, ADC5_GEN3_SI= D, + buf, sizeof(buf)); + if (ret < 0) + return ret; + + conv_req =3D ADC5_GEN3_CONV_REQ_REQ; + return adc5_gen3_write(adc_tm5->dev_data, prop->sdam_index, + ADC5_GEN3_CONV_REQ, &conv_req, sizeof(conv_req)); +} + +static int adc_tm5_gen3_set_trip_temp(struct thermal_zone_device *tz, + int low_temp, int high_temp) +{ + struct adc_tm5_gen3_channel_props *prop =3D thermal_zone_device_priv(tz); + struct adc_tm5_gen3_chip *adc_tm5; + + if (!prop || !prop->chip) + return -EINVAL; + + adc_tm5 =3D prop->chip; + + dev_dbg(adc_tm5->dev, "channel:%s, low_temp(mdegC):%d, high_temp(mdegC):%= d\n", + prop->common_props.label, low_temp, high_temp); + + guard(adc5_gen3)(adc_tm5); + if (high_temp =3D=3D INT_MAX && low_temp =3D=3D -INT_MAX) + return adc_tm5_gen3_disable_channel(prop); + + return adc_tm5_gen3_configure(prop, low_temp, high_temp); +} + +static const struct thermal_zone_device_ops adc_tm_ops =3D { + .get_temp =3D adc_tm5_gen3_get_temp, + .set_trips =3D adc_tm5_gen3_set_trip_temp, +}; + +static int adc_tm5_register_tzd(struct adc_tm5_gen3_chip *adc_tm5) +{ + unsigned int i, channel; + struct thermal_zone_device *tzd; + int ret; + + for (i =3D 0; i < adc_tm5->nchannels; i++) { + channel =3D ADC5_GEN3_V_CHAN(adc_tm5->chan_props[i].common_props); + tzd =3D devm_thermal_of_zone_register(adc_tm5->dev, channel, + &adc_tm5->chan_props[i], + &adc_tm_ops); + + if (IS_ERR(tzd)) { + if (PTR_ERR(tzd) =3D=3D -ENODEV) { + dev_warn(adc_tm5->dev, + "thermal sensor on channel %d is not used\n", + channel); + continue; + } + return dev_err_probe(adc_tm5->dev, PTR_ERR(tzd), + "Error registering TZ zone:%ld for channel:%d\n", + PTR_ERR(tzd), channel); + } + adc_tm5->chan_props[i].tzd =3D tzd; + ret =3D devm_thermal_add_hwmon_sysfs(adc_tm5->dev, tzd); + if (ret) + return ret; + } + return 0; +} + +static void adc5_gen3_clear_work(void *data) +{ + struct adc_tm5_gen3_chip *adc_tm5 =3D data; + + cancel_work_sync(&adc_tm5->tm_handler_work); +} + +static void adc5_gen3_disable(void *data) +{ + struct adc_tm5_gen3_chip *adc_tm5 =3D data; + int i; + + guard(adc5_gen3)(adc_tm5); + /* Disable all available TM channels */ + for (i =3D 0; i < adc_tm5->nchannels; i++) + adc_tm5_gen3_disable_channel(&adc_tm5->chan_props[i]); +} + +static void adctm_event_handler(struct auxiliary_device *adev) +{ + struct adc_tm5_gen3_chip *adc_tm5 =3D auxiliary_get_drvdata(adev); + + schedule_work(&adc_tm5->tm_handler_work); +} + +static int adc_tm5_probe(struct auxiliary_device *aux_dev, + const struct auxiliary_device_id *id) +{ + struct adc_tm5_gen3_chip *adc_tm5; + struct tm5_aux_dev_wrapper *aux_dev_wrapper; + struct device *dev =3D &aux_dev->dev; + int i, ret; + + adc_tm5 =3D devm_kzalloc(dev, sizeof(*adc_tm5), GFP_KERNEL); + if (!adc_tm5) + return -ENOMEM; + + aux_dev_wrapper =3D container_of(aux_dev, struct tm5_aux_dev_wrapper, + aux_dev); + + adc_tm5->dev =3D dev; + adc_tm5->dev_data =3D aux_dev_wrapper->dev_data; + adc_tm5->nchannels =3D aux_dev_wrapper->n_tm_channels; + adc_tm5->chan_props =3D devm_kcalloc(dev, aux_dev_wrapper->n_tm_channels, + sizeof(*adc_tm5->chan_props), GFP_KERNEL); + if (!adc_tm5->chan_props) + return -ENOMEM; + + for (i =3D 0; i < adc_tm5->nchannels; i++) { + adc_tm5->chan_props[i].common_props =3D aux_dev_wrapper->tm_props[i]; + adc_tm5->chan_props[i].timer =3D MEAS_INT_1S; + adc_tm5->chan_props[i].sdam_index =3D (i + 1) / 8; + adc_tm5->chan_props[i].tm_chan_index =3D (i + 1) % 8; + adc_tm5->chan_props[i].chip =3D adc_tm5; + } + + INIT_WORK(&adc_tm5->tm_handler_work, tm_handler_work); + + /* + * Skipping first SDAM IRQ as it is requested in parent driver. + * If there is a TM violation on that IRQ, the parent driver calls + * the notifier (adctm_event_handler) exposed from this driver to handle = it. + */ + for (i =3D 1; i < adc_tm5->dev_data->num_sdams; i++) { + ret =3D devm_request_threaded_irq(dev, + adc_tm5->dev_data->base[i].irq, + NULL, adctm5_gen3_isr, IRQF_ONESHOT, + adc_tm5->dev_data->base[i].irq_name, + adc_tm5); + if (ret < 0) + return ret; + } + + /* + * This drvdata is only used in the function (adctm_event_handler) + * called by parent ADC driver in case of TM violation on the first SDAM. + */ + auxiliary_set_drvdata(aux_dev, adc_tm5); + + adc5_gen3_register_tm_event_notifier(dev, adctm_event_handler); + + /* + * This is to cancel any instances of tm_handler_work scheduled by + * TM interrupt, at the time of module removal. + */ + + ret =3D devm_add_action(dev, adc5_gen3_clear_work, adc_tm5); + if (ret) + return ret; + + ret =3D adc_tm5_register_tzd(adc_tm5); + if (ret) + return ret; + + /* This is to disable all ADC_TM channels in case of probe failure. */ + + return devm_add_action(dev, adc5_gen3_disable, adc_tm5); +} + +static const struct auxiliary_device_id adctm5_auxiliary_id_table[] =3D { + { .name =3D "qcom_spmi_adc5_gen3.adc5_tm_gen3", }, + { } +}; + +MODULE_DEVICE_TABLE(auxiliary, adctm5_auxiliary_id_table); + +static struct auxiliary_driver adctm5gen3_auxiliary_driver =3D { + .id_table =3D adctm5_auxiliary_id_table, + .probe =3D adc_tm5_probe, +}; + +module_auxiliary_driver(adctm5gen3_auxiliary_driver); + +MODULE_DESCRIPTION("SPMI PMIC Thermal Monitor ADC driver"); +MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS("QCOM_SPMI_ADC5_GEN3"); --=20 2.25.1