From nobody Tue Dec 2 02:29:08 2025 Received: from smtpout-03.galae.net (smtpout-03.galae.net [185.246.85.4]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 8531E2BDC0C; Wed, 19 Nov 2025 15:06:04 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=185.246.85.4 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1763564767; cv=none; b=NfIZoqOmd0qWvi1MpxtmwUwDBPpNdGtkLBceGOlaU4bnfWLTkUrYF+8EsDJTmKVuN3bggQQsyml7odZloIatVw0JxJemznHruUH828H341ZJHO15Uj1QeLnBcmYY0/iRoW61+dpBOEGbkXDYl0eFeP3N8DFHO3ebAttaMR88BYE= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1763564767; c=relaxed/simple; bh=XMjhU5xBGVE+BteNaWxQS1rFxs2lHbDdMUeAq5fPn98=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=mrI+IRLShqS/XrWD004+i7FZ/BGnoF0sUl5XyQjrKx0RKaitW0bNPiea/0oKKGy/gpiFCth6k9YbU0IbNIwziOgpDIrwhsV1cJZPXzfcklpX9LJ7QERHYINlf+8tChZgTs78sldF+r/lmwSJVJueDRhrrg1wxq4ONCjfPjzrYBk= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com; spf=pass smtp.mailfrom=bootlin.com; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b=c38y875G; arc=none smtp.client-ip=185.246.85.4 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=bootlin.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b="c38y875G" Received: from smtpout-01.galae.net (smtpout-01.galae.net [212.83.139.233]) by smtpout-03.galae.net (Postfix) with ESMTPS id 1D42E4E417AC; Wed, 19 Nov 2025 15:06:03 +0000 (UTC) Received: from mail.galae.net (mail.galae.net [212.83.136.155]) by smtpout-01.galae.net (Postfix) with ESMTPS id DEED360699; Wed, 19 Nov 2025 15:06:02 +0000 (UTC) Received: from [127.0.0.1] (localhost [127.0.0.1]) by localhost (Mailerdaemon) with ESMTPSA id 5E61D10371A7C; Wed, 19 Nov 2025 16:05:59 +0100 (CET) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=dkim; t=1763564761; h=from:subject:date:message-id:to:cc:mime-version:content-type: content-transfer-encoding:in-reply-to:references; bh=Qlwe5TwEIuTzD/7egh2Z/AjPfw+YwtKdtWet50MaR+k=; b=c38y875GsbRAeytEOKF6p/L4tbghDOm1SE2hMHoTclk8/RZfYgz5QS8zv0W4hWUHTR6N5U Z6tOCP4ga/nWYTYwhesK/SM6U5cQg99UcVk5pZGO038mrguJgN5v0ULGi7Qd/PYRjwt3N1 j7cCL/OsQX7IOj3M1aQvCWiDORvQfku4NMjeXXtf5x05hGbTxJp43FL/9TheQuyhu71T5h PXnbmfIkbLZ//r2bKaivP/dLq6pOTN1zVtmTz0ymJrNoMMA6THkmnEI94AvMr5EH1DAAph BZv6UJ03FBp7ItL/w8U+7P90EFS4lhajbI7dEzD3Bq66ZVGUzRKhu0rRRmkF9Q== From: =?utf-8?q?Beno=C3=AEt_Monin?= Date: Wed, 19 Nov 2025 16:05:36 +0100 Subject: [PATCH v3 7/7] i2c: designware: Support of controller with IC_EMPTYFIFO_HOLD_MASTER disabled Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable Message-Id: <20251119-i2c-dw-v3-7-bc4bc2a2cbac@bootlin.com> References: <20251119-i2c-dw-v3-0-bc4bc2a2cbac@bootlin.com> In-Reply-To: <20251119-i2c-dw-v3-0-bc4bc2a2cbac@bootlin.com> To: Andi Shyti , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Jarkko Nikula , Mika Westerberg , Andy Shevchenko , Jan Dabros , Sebastian Andrzej Siewior , Clark Williams , Steven Rostedt Cc: Thomas Petazzoni , Gregory CLEMENT , =?utf-8?q?Th=C3=A9o_Lebrun?= , Tawfik Bayouk , Vladimir Kondratiev , Dmitry Guzman , linux-i2c@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-rt-devel@lists.linux.dev, =?utf-8?q?Beno=C3=AEt_Monin?= X-Mailer: b4 0.14.3 X-Last-TLS-Session-Version: TLSv1.3 If IC_EMPTYFIFO_HOLD_MASTER_EN parameter is 0, "Stop" and "Repeated Start" bits in command register does not exist, thus it is impossible to send several consecutive write messages in a single hardware batch. The existing implementation worked with such configuration incorrectly: all consecutive write messages are joined into a single message without any Start/Stop or Repeated Start conditions. For example, the following command: i2ctransfer -y 0 w1@0x55 0x00 w1@0x55 0x01 does the same as i2ctransfer -y 0 w2@0x55 0x00 0x01 In i2c_dw_msg_is_valid(), we ensure that we do not have such sequence of messages requiring a RESTART, aborting the transfer on controller that cannot emit them explicitly. This behavior is activated by compatible entries because the state of the IC_EMPTYFIFO_HOLD_MASTER_EN parameter cannot be detected at runtime. Add the compatible entry for Mobileye SoCs needing the workaround. There is another possible problem with this controller configuration: When the CPU is putting commands to the FIFO, this process must not be interrupted because if FIFO buffer gets empty, the controller finishes the I2C transaction and generates STOP condition on the bus. If we continue writing the remainder of the message to the FIFO, the controller will start emitting a new transaction with those data. This turns a single a single message into multiple I2C transactions. To protect against FIFO underrun, two changes are done: First we flag the interrupt with IRQF_NO_THREAD, to prevent it from running in a thread on PREEMPT-RT kernel. This ensures that we are not interrupted when filling the FIFO as it is very time-senstive. For example, being preempted after writing a single byte in the FIFO with a 1MHz bus gives us only 18=C2=B5s before an underrun. Second in i2c_dw_process_transfer(), we abort if a STOP is detected while a read or a write is in progress. This can occur when processing a message larger than the FIFO. In that case the message is processed in parts, and rely on the TX EMPTY interrupt to refill the FIFO when it gets below a threshold. If servicing this interrupt is delayed for too long, it can trigger a FIFO underrun, thus an unwanted STOP. Originally-by: Dmitry Guzman Signed-off-by: Beno=C3=AEt Monin --- drivers/i2c/busses/i2c-designware-core.h | 1 + drivers/i2c/busses/i2c-designware-master.c | 32 +++++++++++++++++++++++++= ++++ drivers/i2c/busses/i2c-designware-platdrv.c | 1 + 3 files changed, 34 insertions(+) diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/= i2c-designware-core.h index 347843b4f5dd..a31a8698e511 100644 --- a/drivers/i2c/busses/i2c-designware-core.h +++ b/drivers/i2c/busses/i2c-designware-core.h @@ -311,6 +311,7 @@ struct dw_i2c_dev { #define ACCESS_NO_IRQ_SUSPEND BIT(1) #define ARBITRATION_SEMAPHORE BIT(2) #define ACCESS_POLLING BIT(3) +#define NO_EMPTYFIFO_HOLD_MASTER BIT(4) =20 #define MODEL_MSCC_OCELOT BIT(8) #define MODEL_BAIKAL_BT1 BIT(9) diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busse= s/i2c-designware-master.c index 2977c13c709c..3486a8c760e0 100644 --- a/drivers/i2c/busses/i2c-designware-master.c +++ b/drivers/i2c/busses/i2c-designware-master.c @@ -710,6 +710,14 @@ static void i2c_dw_process_transfer(struct dw_i2c_dev = *dev, unsigned int stat) if (stat & DW_IC_INTR_TX_EMPTY) i2c_dw_xfer_msg(dev); =20 + /* Abort if we detect a STOP in the middle of a read or a write */ + if ((stat & DW_IC_INTR_STOP_DET) && + (dev->status & (STATUS_READ_IN_PROGRESS | STATUS_WRITE_IN_PROGRESS)))= { + dev_err(dev->dev, "spurious STOP detected\n"); + dev->rx_outstanding =3D 0; + dev->msg_err =3D -EIO; + } + /* * No need to modify or disable the interrupt mask here. * i2c_dw_xfer_msg() will take care of it according to @@ -896,6 +904,16 @@ i2c_dw_msg_is_valid(struct dw_i2c_dev *dev, const stru= ct i2c_msg *msgs, size_t i return false; } =20 + /* + * Make sure we don't need explicit RESTART between two messages + * in the same direction for controllers that cannot emit them. + */ + if (dev->flags & NO_EMPTYFIFO_HOLD_MASTER && + (msgs[idx - 1].flags & I2C_M_RD) =3D=3D (msgs[idx].flags & I2C_M_RD))= { + dev_err(dev->dev, "cannot emit RESTART\n"); + return false; + } + return true; } =20 @@ -1113,6 +1131,20 @@ int i2c_dw_probe_master(struct dw_i2c_dev *dev) irq_flags =3D IRQF_SHARED | IRQF_COND_SUSPEND; } =20 + /* + * The first writing to TX FIFO buffer causes transmission start. If + * IC_EMPTYFIFO_HOLD_MASTER_EN is not set, when TX FIFO gets empty, I2C + * controller finishes the transaction. If writing to FIFO is + * interrupted, FIFO can get empty and the transaction will be finished + * prematurely. FIFO buffer is filled in IRQ handler, but in PREEMPT_RT + * kernel IRQ handler by default is executed in thread that can be + * preempted with another higher priority thread or an interrupt. So, + * IRQF_NO_THREAD flag is required in order to prevent any preemption + * when filling the FIFO. + */ + if (dev->flags & NO_EMPTYFIFO_HOLD_MASTER) + irq_flags |=3D IRQF_NO_THREAD; + ret =3D i2c_dw_acquire_lock(dev); if (ret) return ret; diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/buss= es/i2c-designware-platdrv.c index d7d764f7554d..4aad3dc51fbc 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -346,6 +346,7 @@ static void dw_i2c_plat_remove(struct platform_device *= pdev) =20 static const struct of_device_id dw_i2c_of_match[] =3D { { .compatible =3D "baikal,bt1-sys-i2c", .data =3D (void *)MODEL_BAIKAL_BT= 1 }, + { .compatible =3D "mobileye,eyeq6lplus-i2c", .data =3D (void *)NO_EMPTYFI= FO_HOLD_MASTER }, { .compatible =3D "mscc,ocelot-i2c", .data =3D (void *)MODEL_MSCC_OCELOT = }, { .compatible =3D "snps,designware-i2c" }, {} --=20 2.51.1