From: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Commit 43c51bb573aa ("sc16is7xx: make sure device is in suspend once
probed") permanently enabled access to the enhanced features in
sc16is7xx_probe(), and it is never disabled after that.
Therefore, remove re-enable of enhanced features in
sc16is7xx_set_baud(). This eliminates a potential useless read + write
cycle each time the baud rate is reconfigured.
Fixes: 43c51bb573aa ("sc16is7xx: make sure device is in suspend once probed")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
---
This patch was originally part of this series:
https://lore.kernel.org/linux-serial/20251002145738.3250272-1-hugo@hugovil.com/raw
and it is now separate as suggested by Greg to facilitate stable backporting.
---
drivers/tty/serial/sc16is7xx.c | 7 -------
1 file changed, 7 deletions(-)
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 1a2c4c14f6aac..c7435595dce13 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -588,13 +588,6 @@ static int sc16is7xx_set_baud(struct uart_port *port, int baud)
div /= prescaler;
}
- /* Enable enhanced features */
- sc16is7xx_efr_lock(port);
- sc16is7xx_port_update(port, SC16IS7XX_EFR_REG,
- SC16IS7XX_EFR_ENABLE_BIT,
- SC16IS7XX_EFR_ENABLE_BIT);
- sc16is7xx_efr_unlock(port);
-
/* If bit MCR_CLKSEL is set, the divide by 4 prescaler is activated. */
sc16is7xx_port_update(port, SC16IS7XX_MCR_REG,
SC16IS7XX_MCR_CLKSEL_BIT,
base-commit: fd94619c43360eb44d28bd3ef326a4f85c600a07
--
2.39.5