From nobody Wed Oct 1 22:26:35 2025 Received: from layka.disroot.org (layka.disroot.org [178.21.23.139]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id CC21A23C506; Sun, 28 Sep 2025 16:44:12 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=178.21.23.139 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1759077855; cv=none; b=ikYVMnvtZueOBNjuE8qFP8BdClY8kdH6x7AsCRdgqvY2R4BnTFbEsO0HaJ1wdIq4vJsjYeATTOYmSCGXfpT7zr8vMte6Q9WiO7C+8gzF3Ph3uHPyxWqfGPqg6CUaO1JBpMVwytpGc3I11cmBt1ZSUTvqdDzYDK3Juj2wRoF2+cg= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1759077855; c=relaxed/simple; bh=COATQ0Ql12ldgC+RxZNV2cbbhQkM0zUgDAXRcSBHY9Y=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=gfFSDUTxak231yMBEqSuACHW7CMeg+W6dvBsAF8+sZSXTn2UlQOfCUQQvV9ZrV5/+2POLOMrYtLy6dgE1j2zIjWrU239gRmQsv3OygzDHKjeMEZXG1sPObcT0qMluhJT6B55OKpi8T4tZ+mZL88Gex6D4+4YorT15ojFcNUaQqM= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=disroot.org; spf=pass smtp.mailfrom=disroot.org; dkim=pass (2048-bit key) header.d=disroot.org header.i=@disroot.org header.b=iR3DBstF; arc=none smtp.client-ip=178.21.23.139 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=disroot.org Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=disroot.org Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=disroot.org header.i=@disroot.org header.b="iR3DBstF" Received: from mail01.disroot.lan (localhost [127.0.0.1]) by disroot.org (Postfix) with ESMTP id 4F7EC25DD1; Sun, 28 Sep 2025 18:44:11 +0200 (CEST) X-Virus-Scanned: SPAM Filter at disroot.org Received: from layka.disroot.org ([127.0.0.1]) by localhost (disroot.org [127.0.0.1]) (amavis, port 10024) with ESMTP id ytEBsTR3oVOJ; Sun, 28 Sep 2025 18:44:10 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=disroot.org; s=mail; t=1759077850; bh=COATQ0Ql12ldgC+RxZNV2cbbhQkM0zUgDAXRcSBHY9Y=; h=From:Date:Subject:References:In-Reply-To:To:Cc; b=iR3DBstFZNILUfe1yubvC0+k/mnLr0B0GKtazmOgGcjtBSAzNUILV6z76yeYcV+QL RJ0htHXjUEhMszfNHlQrAFAkidms4/+kcj+0JxuIsajXo7e/Iweaj8o7HEyG1C7q+w +7TfKjoDnQaxCjy+NRUXg0qGZaNhqh1MfVFASNVJqfOImhS3Fi7mAn4I7KXrwTcMLt GmdJWRLSCRpbyDKV9DxwF9fQgF/PlOFper6HjgWIxmnyN44LvihjYmR8xXSxpJZ+Uh 5nGcJfVvzvirHXp6HR44Aev2Bap3upHoAiHDs9yFSfvvoKDgKM64wvD0iq1Li/KHDa Kntr19BZE5Cdg== From: Kaustabh Chakraborty Date: Sun, 28 Sep 2025 22:13:52 +0530 Subject: [PATCH 1/7] arm64: dts: exynos7870: relocate ${x}-names property after ${x} Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable Message-Id: <20250928-exynos7870-dt-fixes-v1-1-a40e77a73f16@disroot.org> References: <20250928-exynos7870-dt-fixes-v1-0-a40e77a73f16@disroot.org> In-Reply-To: <20250928-exynos7870-dt-fixes-v1-0-a40e77a73f16@disroot.org> To: Rob Herring , Krzysztof Kozlowski , Conor Dooley , Alim Akhtar Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org, Kaustabh Chakraborty X-Developer-Signature: v=1; a=ed25519-sha256; t=1759077839; l=13693; i=kauschluss@disroot.org; s=20250202; h=from:subject:message-id; bh=COATQ0Ql12ldgC+RxZNV2cbbhQkM0zUgDAXRcSBHY9Y=; b=+ez2Gb/x7Ge5AVpIm82geksnMvxaMRqg/0kcGQ5AJW0n6jE/J+M+gWz8ewiIs5mtnO1te15jy jwmG96Jro/mBO/ab63lshhoo/ue9fqMppP1hCRgtGT7Cgm6RboQ+CEg X-Developer-Key: i=kauschluss@disroot.org; a=ed25519; pk=h2xeR+V2I1+GrfDPAhZa3M+NWA0Cnbdkkq1bH3ct1hE= All ${x}-names properties are conventionally placed after their corresponding ${x} properties. For instance, 'clock-names' must follow 'clocks', 'interrupt-names' must follow 'interrupts'. Make necessary changes to follow said convention. No functional changes made. Signed-off-by: Kaustabh Chakraborty --- arch/arm64/boot/dts/exynos/exynos7870.dtsi | 108 ++++++++++++++-----------= ---- 1 file changed, 54 insertions(+), 54 deletions(-) diff --git a/arch/arm64/boot/dts/exynos/exynos7870.dtsi b/arch/arm64/boot/d= ts/exynos/exynos7870.dtsi index d5d347623b9038b71da55dccdc9084aeaf71618c..48ace70fb958edd28d758f4afea= 52bc4c7192001 100644 --- a/arch/arm64/boot/dts/exynos/exynos7870.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7870.dtsi @@ -150,8 +150,6 @@ cmu_peri: clock-controller@101f0000 { reg =3D <0x101f0000 0x1000>; #clock-cells =3D <1>; =20 - clock-names =3D "oscclk", "bus", "spi0", "spi1", "spi2", - "spi3", "spi4", "uart0", "uart1", "uart2"; clocks =3D <&oscclk>, <&cmu_mif CLK_GOUT_MIF_CMU_PERI_BUS>, <&cmu_mif CLK_GOUT_MIF_CMU_PERI_SPI0>, @@ -162,6 +160,8 @@ cmu_peri: clock-controller@101f0000 { <&cmu_mif CLK_GOUT_MIF_CMU_PERI_UART0>, <&cmu_mif CLK_GOUT_MIF_CMU_PERI_UART1>, <&cmu_mif CLK_GOUT_MIF_CMU_PERI_UART2>; + clock-names =3D "oscclk", "bus", "spi0", "spi1", "spi2", + "spi3", "spi4", "uart0", "uart1", "uart2"; }; =20 cmu_mif: clock-controller@10460000 { @@ -169,8 +169,8 @@ cmu_mif: clock-controller@10460000 { reg =3D <0x10460000 0x1000>; #clock-cells =3D <1>; =20 - clock-names =3D "oscclk"; clocks =3D <&oscclk>; + clock-names =3D "oscclk"; }; =20 pmu_system_controller: system-controller@10480000 { @@ -206,11 +206,11 @@ hsi2c0: i2c@10510000 { reg =3D <0x10510000 0x2000>; interrupts =3D ; =20 - pinctrl-names =3D "default"; pinctrl-0 =3D <&hsi2c0_bus>; + pinctrl-names =3D "default"; =20 - clock-names =3D "hsi2c"; clocks =3D <&cmu_mif CLK_GOUT_MIF_HSI2C_IPCLK>; + clock-names =3D "hsi2c"; =20 status =3D "disabled"; }; @@ -224,14 +224,14 @@ pinctrl_mif: pinctrl@10530000 { gpu: gpu@11400000 { compatible =3D "samsung,exynos7870-mali", "arm,mali-t830"; reg =3D <0x11400000 0x5000>; - interrupt-names =3D "job", "mmu", "gpu"; interrupts =3D , , ; + interrupt-names =3D "job", "mmu", "gpu"; =20 - clock-names =3D "core", "bus"; clocks =3D <&cmu_g3d CLK_GOUT_G3D_CLK>, <&cmu_g3d CLK_GOUT_G3D_ASYNCS_D0_CLK>; + clock-names =3D "core", "bus"; =20 status =3D "disabled"; }; @@ -241,9 +241,9 @@ cmu_g3d: clock-controller@11460000 { reg =3D <0x11460000 0x1000>; #clock-cells =3D <1>; =20 - clock-names =3D "oscclk", "switch"; clocks =3D <&oscclk>, <&cmu_mif CLK_GOUT_MIF_CMU_G3D_SWITCH>; + clock-names =3D "oscclk", "switch"; }; =20 cmu_mfcmscl: clock-controller@12cb0000 { @@ -251,10 +251,10 @@ cmu_mfcmscl: clock-controller@12cb0000 { reg =3D <0x12cb0000 0x1000>; #clock-cells =3D <1>; =20 - clock-names =3D "oscclk", "mfc", "mscl"; clocks =3D <&oscclk>, <&cmu_mif CLK_GOUT_MIF_CMU_MFCMSCL_MFC>, <&cmu_mif CLK_GOUT_MIF_CMU_MFCMSCL_MSCL>; + clock-names =3D "oscclk", "mfc", "mscl"; }; =20 mmc0: mmc@13540000 { @@ -262,9 +262,9 @@ mmc0: mmc@13540000 { reg =3D <0x13540000 0x2000>; interrupts =3D ; =20 - clock-names =3D "biu", "ciu"; clocks =3D <&cmu_fsys CLK_GOUT_FSYS_MMC0_ACLK>, <&cmu_mif CLK_GOUT_MIF_CMU_FSYS_MMC0>; + clock-names =3D "biu", "ciu"; =20 status =3D "disabled"; }; @@ -274,9 +274,9 @@ mmc1: mmc@13550000 { reg =3D <0x13550000 0x2000>; interrupts =3D ; =20 - clock-names =3D "biu", "ciu"; clocks =3D <&cmu_fsys CLK_GOUT_FSYS_MMC1_ACLK>, <&cmu_mif CLK_GOUT_MIF_CMU_FSYS_MMC1>; + clock-names =3D "biu", "ciu"; =20 status =3D "disabled"; }; @@ -286,9 +286,9 @@ mmc2: mmc@13560000 { reg =3D <0x13560000 0x2000>; interrupts =3D ; =20 - clock-names =3D "biu", "ciu"; clocks =3D <&cmu_fsys CLK_GOUT_FSYS_MMC2_ACLK>, <&cmu_mif CLK_GOUT_MIF_CMU_FSYS_MMC2>; + clock-names =3D "biu", "ciu"; =20 status =3D "disabled"; }; @@ -298,9 +298,9 @@ usbdrd_phy: phy@135c0000 { reg =3D <0x135c0000 0x100>; #phy-cells =3D <1>; =20 - clock-names =3D "phy", "ref"; clocks =3D <&cmu_fsys CLK_GOUT_FSYS_MUX_USB20DRD_PHYCLOCK_USER>, <&cmu_fsys CLK_GOUT_FSYS_MUX_USB_PLL>; + clock-names =3D "phy", "ref"; =20 samsung,pmu-syscon =3D <&pmu_system_controller>; }; @@ -311,10 +311,10 @@ usbdrd: usb@13600000 { #address-cells =3D <1>; #size-cells =3D <1>; =20 - clock-names =3D "bus_early", "ref", "ctrl"; clocks =3D <&cmu_fsys CLK_GOUT_FSYS_USB20DRD_ACLK_HSDRD>, <&cmu_fsys CLK_GOUT_FSYS_USB20DRD_HSDRD_REF_CLK>, <&cmu_fsys CLK_GOUT_FSYS_USB20DRD_HCLK_USB20_CTRL>; + clock-names =3D "bus_early", "ref", "ctrl"; =20 status =3D "disabled"; =20 @@ -323,8 +323,8 @@ usb@0 { reg =3D <0x0 0x10000>; interrupts =3D ; =20 - phy-names =3D "usb2-phy"; phys =3D <&usbdrd_phy 0>; + phy-names =3D "usb2-phy"; =20 usb-role-switch; snps,usb2-gadget-lpm-disable; @@ -336,10 +336,10 @@ cmu_fsys: clock-controller@13730000 { reg =3D <0x13730000 0x1000>; #clock-cells =3D <1>; =20 - clock-names =3D "oscclk", "bus", "usb20drd"; clocks =3D <&oscclk>, <&cmu_mif CLK_GOUT_MIF_CMU_FSYS_BUS>, <&cmu_mif CLK_GOUT_MIF_CMU_FSYS_USB20DRD_REFCLK>; + clock-names =3D "oscclk", "bus", "usb20drd"; }; =20 pinctrl_fsys: pinctrl@13750000 { @@ -354,12 +354,12 @@ serial0: serial@13800000 { reg =3D <0x13800000 0x100>; interrupts =3D ; =20 - pinctrl-names =3D "default"; pinctrl-0 =3D <&uart0_bus>; + pinctrl-names =3D "default"; =20 - clock-names =3D "uart", "clk_uart_baud0"; clocks =3D <&cmu_peri CLK_GOUT_PERI_UART0_PCLK>, <&cmu_peri CLK_GOUT_PERI_UART0_EXT_UCLK>; + clock-names =3D "uart", "clk_uart_baud0"; =20 samsung,uart-fifosize =3D <16>; =20 @@ -372,12 +372,12 @@ serial1: serial@13810000 { reg =3D <0x13810000 0x100>; interrupts =3D ; =20 - pinctrl-names =3D "default"; pinctrl-0 =3D <&uart1_bus>; + pinctrl-names =3D "default"; =20 - clock-names =3D "uart", "clk_uart_baud0"; clocks =3D <&cmu_peri CLK_GOUT_PERI_UART1_PCLK>, <&cmu_peri CLK_GOUT_PERI_UART1_EXT_UCLK>; + clock-names =3D "uart", "clk_uart_baud0"; =20 samsung,uart-fifosize =3D <256>; =20 @@ -390,12 +390,12 @@ serial2: serial@13820000 { reg =3D <0x13820000 0x100>; interrupts =3D ; =20 - pinctrl-names =3D "default"; pinctrl-0 =3D <&uart2_bus>; + pinctrl-names =3D "default"; =20 - clock-names =3D "uart", "clk_uart_baud0"; clocks =3D <&cmu_peri CLK_GOUT_PERI_UART2_PCLK>, <&cmu_peri CLK_GOUT_PERI_UART2_EXT_UCLK>; + clock-names =3D "uart", "clk_uart_baud0"; =20 samsung,uart-fifosize =3D <256>; =20 @@ -408,11 +408,11 @@ i2c0: i2c@13830000 { reg =3D <0x13830000 0x100>; interrupts =3D ; =20 - pinctrl-names =3D "default"; pinctrl-0 =3D <&i2c0_bus>; + pinctrl-names =3D "default"; =20 - clock-names =3D "i2c"; clocks =3D <&cmu_peri CLK_GOUT_PERI_I2C0_PCLK>; + clock-names =3D "i2c"; =20 status =3D "disabled"; }; @@ -423,11 +423,11 @@ i2c1: i2c@13840000 { reg =3D <0x13840000 0x100>; interrupts =3D ; =20 - pinctrl-names =3D "default"; pinctrl-0 =3D <&i2c1_bus>; + pinctrl-names =3D "default"; =20 - clock-names =3D "i2c"; clocks =3D <&cmu_peri CLK_GOUT_PERI_I2C1_PCLK>; + clock-names =3D "i2c"; =20 status =3D "disabled"; }; @@ -438,11 +438,11 @@ i2c2: i2c@13850000 { reg =3D <0x13850000 0x100>; interrupts =3D ; =20 - pinctrl-names =3D "default"; pinctrl-0 =3D <&i2c2_bus>; + pinctrl-names =3D "default"; =20 - clock-names =3D "i2c"; clocks =3D <&cmu_peri CLK_GOUT_PERI_I2C2_PCLK>; + clock-names =3D "i2c"; =20 status =3D "disabled"; }; @@ -453,11 +453,11 @@ i2c3: i2c@13860000 { reg =3D <0x13860000 0x100>; interrupts =3D ; =20 - pinctrl-names =3D "default"; pinctrl-0 =3D <&i2c3_bus>; + pinctrl-names =3D "default"; =20 - clock-names =3D "i2c"; clocks =3D <&cmu_peri CLK_GOUT_PERI_I2C3_PCLK>; + clock-names =3D "i2c"; =20 status =3D "disabled"; }; @@ -468,11 +468,11 @@ i2c4: i2c@13870000 { reg =3D <0x13870000 0x100>; interrupts =3D ; =20 - pinctrl-names =3D "default"; pinctrl-0 =3D <&i2c4_bus>; + pinctrl-names =3D "default"; =20 - clock-names =3D "i2c"; clocks =3D <&cmu_peri CLK_GOUT_PERI_I2C4_PCLK>; + clock-names =3D "i2c"; =20 status =3D "disabled"; }; @@ -483,11 +483,11 @@ i2c5: i2c@13880000 { reg =3D <0x13880000 0x100>; interrupts =3D ; =20 - pinctrl-names =3D "default"; pinctrl-0 =3D <&i2c5_bus>; + pinctrl-names =3D "default"; =20 - clock-names =3D "i2c"; clocks =3D <&cmu_peri CLK_GOUT_PERI_I2C5_PCLK>; + clock-names =3D "i2c"; =20 status =3D "disabled"; }; @@ -498,11 +498,11 @@ i2c6: i2c@13890000 { reg =3D <0x13890000 0x100>; interrupts =3D ; =20 - pinctrl-names =3D "default"; pinctrl-0 =3D <&i2c6_bus>; + pinctrl-names =3D "default"; =20 - clock-names =3D "i2c"; clocks =3D <&cmu_peri CLK_GOUT_PERI_I2C6_PCLK>; + clock-names =3D "i2c"; =20 status =3D "disabled"; }; @@ -513,11 +513,11 @@ hsi2c1: i2c@138a0000 { reg =3D <0x138a0000 0x1000>; interrupts =3D ; =20 - pinctrl-names =3D "default"; pinctrl-0 =3D <&hsi2c1_bus>; + pinctrl-names =3D "default"; =20 - clock-names =3D "hsi2c"; clocks =3D <&cmu_peri CLK_GOUT_PERI_HSI2C1_IPCLK>; + clock-names =3D "hsi2c"; =20 status =3D "disabled"; }; @@ -528,11 +528,11 @@ hsi2c2: i2c@138b0000 { reg =3D <0x138b0000 0x1000>; interrupts =3D ; =20 - pinctrl-names =3D "default"; pinctrl-0 =3D <&hsi2c2_bus>; + pinctrl-names =3D "default"; =20 - clock-names =3D "hsi2c"; clocks =3D <&cmu_peri CLK_GOUT_PERI_HSI2C2_IPCLK>; + clock-names =3D "hsi2c"; =20 status =3D "disabled"; }; @@ -543,11 +543,11 @@ hsi2c3: i2c@138c0000 { reg =3D <0x138c0000 0x1000>; interrupts =3D ; =20 - pinctrl-names =3D "default"; pinctrl-0 =3D <&hsi2c3_bus>; + pinctrl-names =3D "default"; =20 - clock-names =3D "hsi2c"; clocks =3D <&cmu_peri CLK_GOUT_PERI_HSI2C3_IPCLK>; + clock-names =3D "hsi2c"; =20 status =3D "disabled"; }; @@ -558,11 +558,11 @@ i2c7: i2c@138d0000 { reg =3D <0x138d0000 0x100>; interrupts =3D ; =20 - pinctrl-names =3D "default"; pinctrl-0 =3D <&i2c7_bus>; + pinctrl-names =3D "default"; =20 - clock-names =3D "i2c"; clocks =3D <&cmu_peri CLK_GOUT_PERI_I2C7_PCLK>; + clock-names =3D "i2c"; =20 status =3D "disabled"; }; @@ -573,11 +573,11 @@ i2c8: i2c@138e0000 { reg =3D <0x138e0000 0x100>; interrupts =3D ; =20 - pinctrl-names =3D "default"; pinctrl-0 =3D <&i2c8_bus>; + pinctrl-names =3D "default"; =20 - clock-names =3D "i2c"; clocks =3D <&cmu_peri CLK_GOUT_PERI_I2C8_PCLK>; + clock-names =3D "i2c"; =20 status =3D "disabled"; }; @@ -588,11 +588,11 @@ hsi2c4: i2c@138f0000 { reg =3D <0x138f0000 0x1000>; interrupts =3D ; =20 - pinctrl-names =3D "default"; pinctrl-0 =3D <&hsi2c4_bus>; + pinctrl-names =3D "default"; =20 - clock-names =3D "hsi2c"; clocks =3D <&cmu_peri CLK_GOUT_PERI_HSI2C4_IPCLK>; + clock-names =3D "hsi2c"; =20 status =3D "disabled"; }; @@ -603,11 +603,11 @@ hsi2c5: i2c@13950000 { reg =3D <0x13950000 0x1000>; interrupts =3D ; =20 - pinctrl-names =3D "default"; pinctrl-0 =3D <&hsi2c5_bus>; + pinctrl-names =3D "default"; =20 - clock-names =3D "hsi2c"; clocks =3D <&cmu_peri CLK_GOUT_PERI_HSI2C5_IPCLK>; + clock-names =3D "hsi2c"; =20 status =3D "disabled"; }; @@ -618,11 +618,11 @@ hsi2c6: i2c@13960000 { reg =3D <0x13960000 0x1000>; interrupts =3D ; =20 - pinctrl-names =3D "default"; pinctrl-0 =3D <&hsi2c6_bus>; + pinctrl-names =3D "default"; =20 - clock-names =3D "hsi2c"; clocks =3D <&cmu_peri CLK_GOUT_PERI_HSI2C6_IPCLK>; + clock-names =3D "hsi2c"; =20 status =3D "disabled"; }; @@ -668,11 +668,11 @@ cmu_isp: clock-controller@144d0000 { reg =3D <0x144d0000 0x1000>; #clock-cells =3D <1>; =20 - clock-names =3D "oscclk", "cam", "isp", "vra"; clocks =3D <&oscclk>, <&cmu_mif CLK_GOUT_MIF_CMU_ISP_CAM>, <&cmu_mif CLK_GOUT_MIF_CMU_ISP_ISP>, <&cmu_mif CLK_GOUT_MIF_CMU_ISP_VRA>; + clock-names =3D "oscclk", "cam", "isp", "vra"; }; =20 pinctrl_dispaud: pinctrl@148c0000 { @@ -686,11 +686,11 @@ cmu_dispaud: clock-controller@148d0000 { reg =3D <0x148d0000 0x1000>; #clock-cells =3D <1>; =20 - clock-names =3D "oscclk", "bus", "decon_eclk", "decon_vclk"; clocks =3D <&oscclk>, <&cmu_mif CLK_GOUT_MIF_CMU_DISPAUD_BUS>, <&cmu_mif CLK_GOUT_MIF_CMU_DISPAUD_DECON_ECLK>, <&cmu_mif CLK_GOUT_MIF_CMU_DISPAUD_DECON_VCLK>; + clock-names =3D "oscclk", "bus", "decon_eclk", "decon_vclk"; }; }; =20 --=20 2.51.0