From nobody Thu Oct 2 23:03:27 2025 Received: from mx0b-0031df01.pphosted.com (mx0b-0031df01.pphosted.com [205.220.180.131]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id D08C0313547 for ; Wed, 10 Sep 2025 09:03:17 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=205.220.180.131 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1757495000; cv=none; b=NPkVigpGNRqgQKPJVMf1e3cP8O18AIjcyKb8uNE/Uh0VZsYZSUpMWUO4TVbpu/OVhwMznprjtQM/GU/IxWBBLT9iVKd3mNW6J3HLSiO1xDS8sROFmrjCWqUsOrXcB27Izm+mPz6zSaynU52w9AGqVIdLJ1BB2J8HsMYuTDYyBXU= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1757495000; c=relaxed/simple; bh=YRVpofsq82PiyAhQWK6/oJbCeFfriW5iGiEZ/ENuIbg=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=ZtXIPawIEVmllWq3272dLSvoCxzjZ41ST04E635ijNgTPo0o5D1sv8Yb6Dghfyi8mOJ3E0Bc/q4pZdDN9ZHYRtD6AGPFbLDymPbMCaGFsAWuxmbqV/WS1IdyIANN36hgGw/M6gf39WrnJuYpDc4eXcbc2rqTlDzJuH7ER+9oI2I= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=oss.qualcomm.com; spf=pass smtp.mailfrom=oss.qualcomm.com; dkim=pass (2048-bit key) header.d=qualcomm.com header.i=@qualcomm.com header.b=YvGii4CA; arc=none smtp.client-ip=205.220.180.131 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=oss.qualcomm.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=oss.qualcomm.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=qualcomm.com header.i=@qualcomm.com header.b="YvGii4CA" Received: from pps.filterd (m0279868.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.18.1.2/8.18.1.2) with ESMTP id 58A7ci19017964 for ; Wed, 10 Sep 2025 09:03:17 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=qualcomm.com; h= cc:content-transfer-encoding:content-type:date:from:in-reply-to :message-id:mime-version:references:subject:to; s=qcppdkim1; bh= FAivy+GMUW1ZKvi0RW/HP8iwU9vcsNcC1c4RmPutrU0=; b=YvGii4CA+6qEgBYu au3NVFRHM4ykVlYj37GVtHoSNi/uP7urpOmmc566iMBPIl/OotB081gVlkG6eUxT GAr2F5ivtvUMkZDZ+Y9D+zJ4C71RApDUnYUpn9Ha9XC1H09f7c25XFkNQbIoPn0r 20bEjk5oh2A3YaLiTUNbK+n2lPCxkvL3d5sNuUTqH0bE0XJa3KZI27UM1vnBaxTE 1inksVPKpPo+43oC11OQJrt7ytpRrHVAwzIRqd2okHiCxx+uz/0sR3aMyNqDReq6 MZ5ETI1TMndTeTzo6ExVlHuYTcGa0RIUOXjcd779OvgUuOrNN3Jnb9ijDAGK4ixH ValN3Q== Received: from mail-pl1-f200.google.com (mail-pl1-f200.google.com [209.85.214.200]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 490c9jbc8g-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128 verify=NOT) for ; Wed, 10 Sep 2025 09:03:16 +0000 (GMT) Received: by mail-pl1-f200.google.com with SMTP id d9443c01a7336-24caf28cce0so155375325ad.0 for ; Wed, 10 Sep 2025 02:03:16 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1757494995; x=1758099795; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=FAivy+GMUW1ZKvi0RW/HP8iwU9vcsNcC1c4RmPutrU0=; b=Sk6DReqewaQ5lDmN3WTW0LKtLwTuccgHd/5x8/8wEj6DSszL/0i7WaCPFcgoxnKQlk mdhX9UdLud00mck7/Hl7e14/+4Ij5Xvft+0r2ENlwkUaCIn8dMpPIROgq7UhBkMKMycy /tEKbAMw+9OVDgAXbCLzzZtkLpBqMlxyvYZgQd1hKVLicpMalV/x8X7MNx8RkwMypy7p Rsu+zNsTsdWZM/WblSImBg5GoelGLIlzlq3ZvkkLF7KxrrysUQMUjZYBaIrMb1YEN2ay Z1TKskRjA4SJM7faMECdNVQYFvf1DO8WOAG4vabiiX8TEfh9VbRZsI3LA9YvR+xrM0cO M7oA== X-Forwarded-Encrypted: i=1; AJvYcCUDjhV567NYAXID/EkUDy8sZLC4ZOIBIlT6pdEqlJ7ItBMVTY0s8Kg1UgdskXhkAMRpcZSJ9ODM0CF5uNo=@vger.kernel.org X-Gm-Message-State: AOJu0Yzz+8HGvdULBKDpf6dc1nP9J5/lhTL8CVbG3iCtdD4Alz0kEkVV f7YXw0tHeWN7v2QtXDExZHtsuFs7/LD6FBXCxlN0UMzslzL6BBkiglaoXcsUMKkQWCoi4hECjYK QBdojP0Ap7iEGxJXLaQAZ16WDfP+njRa9zvKcTMqS1n5gxaD4DOM4wUOwjW0c6koh7xg= X-Gm-Gg: ASbGncsHMRABLUecGaV6xS3BhXhlP5cdrABzss+L9D0iNL7jh5haYQABrqLqfGeFOQy Q+bN5NPFXta3XDUm4WIlWJzzVBSFQW+5gXBQhhMROXe7HfPGtvWRDRvDcseEvheRN25d+BDY0lk LbwgqZOkdYOwdySw1Gdfkq3xPFEBPy1yGEifbRzRuhP14UtUY6SsCj/VpwGfmhQcYZAfwUFaZ6U uqL+UQG8+8UhtKY1zjMDBeA+z4LzI4eNv+GJhNLWF9hhraGuLxrowPVKpVfz+QSsFNNBEjDOnSe kQmiAVa8pfGwJ6RmR7X0sVUBfZUMWVALW0HSW0Riokv0haB0tXYVE1G2ja0213cvnaIqyyf8155 Xg0GaWbnWXhr2bIA9ZiH2ouW1nUYi9nGXWA== X-Received: by 2002:a17:903:1904:b0:24c:92b5:2175 with SMTP id d9443c01a7336-2517057f138mr205365215ad.24.1757494994737; Wed, 10 Sep 2025 02:03:14 -0700 (PDT) X-Google-Smtp-Source: AGHT+IEI+kxmrAuUpSlkA+3J6uN+kJVj263OjNLeBY683C9kyi4NmXS9f9BM3SU0fm0d0tgGPn3vAw== X-Received: by 2002:a17:903:1904:b0:24c:92b5:2175 with SMTP id d9443c01a7336-2517057f138mr205364785ad.24.1757494994064; Wed, 10 Sep 2025 02:03:14 -0700 (PDT) Received: from yijiyang-gv.ap.qualcomm.com (tpe-colo-wan-fw-bordernet.qualcomm.com. [103.229.16.4]) by smtp.gmail.com with ESMTPSA id d9443c01a7336-25a27c029ccsm21089155ad.41.2025.09.10.02.03.11 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 10 Sep 2025 02:03:13 -0700 (PDT) From: Yijie Yang Date: Wed, 10 Sep 2025 17:02:12 +0800 Subject: [PATCH v11 4/4] arm64: dts: qcom: Add base HAMOA-IOT-EVK board Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable Message-Id: <20250910-hamoa_initial-v11-4-38ed7f2015f7@oss.qualcomm.com> References: <20250910-hamoa_initial-v11-0-38ed7f2015f7@oss.qualcomm.com> In-Reply-To: <20250910-hamoa_initial-v11-0-38ed7f2015f7@oss.qualcomm.com> To: Bjorn Andersson , Konrad Dybcio , Rob Herring , Krzysztof Kozlowski , Conor Dooley Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Yijie Yang X-Mailer: b4 0.15-dev-5bbf5 X-Developer-Signature: v=1; a=ed25519-sha256; t=1757494975; l=27798; i=yijie.yang@oss.qualcomm.com; s=20240408; h=from:subject:message-id; bh=YRVpofsq82PiyAhQWK6/oJbCeFfriW5iGiEZ/ENuIbg=; b=j3vszdR0GArcgLYr19ZlVn5tlXqP0h6QfPGTrpTcEBmrTJVWydGucI3v5bg2O26Ttym7qq2t6 GyKVjtPcomHDwFVfFWIt2sVdnkUzJ27d6uQl272XdfScD6jcdEZY4IL X-Developer-Key: i=yijie.yang@oss.qualcomm.com; a=ed25519; pk=XvMv0rxjrXLYFdBXoFjTdOdAwDT5SPbQ5uAKGESDihk= X-Proofpoint-Spam-Details-Enc: AW1haW4tMjUwOTA2MDAyMiBTYWx0ZWRfX9LAepwxZ0qmU uZRYLLEJgoc+JDlcCiuRKuL31k7tF4P2s7M1pLuqO5+is6gks4xLi2yoMeQg7kCAJmo7ZR8TuCU rYOMUy6sUKg5VA7RFkGDdjmXgjAD8/P9eAQ+CS40yQYskoxweMP2XaqHbgbumIDjoq6V/7iv7Md P4NMNB+6U0JQGZROcxgGuc6soCVNGWyx937LD7avEYAPNVYiaLPo1fbVX/WLUOHqoewpIuJfqjP i2uFZ/aDrl4iAQgEP6IjRsiWQ64t+m4EO0v89swrznxJDkz4UAcMteAuNytmmdnMWVZVWPFswYm 8DSLdEfp2cM9io/vjAZLR6ofeMInzo2ql+tsbgRBrHpVAfLLyIFCDr00cGH4WiCTxl0uu10+OKa zRHa9zq5 X-Proofpoint-ORIG-GUID: FFs_R5rsRc37gJdmgKB_jEW-7vG8Vigj X-Authority-Analysis: v=2.4 cv=PpOTbxM3 c=1 sm=1 tr=0 ts=68c13ed4 cx=c_pps a=IZJwPbhc+fLeJZngyXXI0A==:117 a=nuhDOHQX5FNHPW3J6Bj6AA==:17 a=IkcTkHD0fZMA:10 a=yJojWOMRYYMA:10 a=EUspDBNiAAAA:8 a=COk6AnOGAAAA:8 a=0tVnaCvAkXLXzvIwGYMA:9 a=QEXdDO2ut3YA:10 a=uG9DUKGECoFWVXl0Dc02:22 a=TjNXssC_j7lpFel5tvFf:22 X-Proofpoint-GUID: FFs_R5rsRc37gJdmgKB_jEW-7vG8Vigj X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.293,Aquarius:18.0.1117,Hydra:6.1.9,FMLib:17.12.80.40 definitions=2025-09-09_03,2025-09-10_01,2025-03-28_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 suspectscore=0 phishscore=0 spamscore=0 bulkscore=0 clxscore=1015 malwarescore=0 adultscore=0 impostorscore=0 priorityscore=1501 classifier=typeunknown authscore=0 authtc= authcc= route=outbound adjust=0 reason=mlx scancount=1 engine=8.19.0-2507300000 definitions=main-2509060022 The HAMOA-IOT-EVK is an evaluation platform for IoT products, composed of the Hamoa IoT SoM and a carrier board. Together, they form a complete embedded system capable of booting to UART. Make the following peripherals on the carrier board enabled: - UART - On-board regulators - USB Type-C mux - Pinctrl - Embedded USB (EUSB) repeaters - NVMe - pmic-glink - USB DisplayPorts - Bluetooth - WLAN - Audio Written in collaboration with Quill Qi (Audio) , Jie Zhang (Graphics) , Shuai Zhang (Bluetooth) , Yingying Tang (WLAN) , and Yongxing Mou (USB DisplayPorts) . Signed-off-by: Yijie Yang --- arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts | 1221 ++++++++++++++++++++++++= ++++ 2 files changed, 1222 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/M= akefile index 0e4e0e0b833b..3d11e93cd5cc 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -13,6 +13,7 @@ dtb-$(CONFIG_ARCH_QCOM) +=3D apq8039-t2.dtb dtb-$(CONFIG_ARCH_QCOM) +=3D apq8094-sony-xperia-kitakami-karin_windy.dtb dtb-$(CONFIG_ARCH_QCOM) +=3D apq8096-db820c.dtb dtb-$(CONFIG_ARCH_QCOM) +=3D apq8096-ifc6640.dtb +dtb-$(CONFIG_ARCH_QCOM) +=3D hamoa-iot-evk.dtb dtb-$(CONFIG_ARCH_QCOM) +=3D ipq5018-rdp432-c2.dtb dtb-$(CONFIG_ARCH_QCOM) +=3D ipq5018-tplink-archer-ax55-v1.dtb dtb-$(CONFIG_ARCH_QCOM) +=3D ipq5332-rdp441.dtb diff --git a/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts b/arch/arm64/boot/d= ts/qcom/hamoa-iot-evk.dts new file mode 100644 index 000000000000..6eedad7e858a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts @@ -0,0 +1,1221 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +/dts-v1/; + +#include "hamoa-iot-som.dtsi" + +/ { + model =3D "Qualcomm Technologies, Inc. Hamoa IoT EVK"; + compatible =3D "qcom,hamoa-iot-evk", "qcom,hamoa-iot-som", "qcom,x1e80100= "; + chassis-type =3D "embedded"; + + aliases { + serial0 =3D &uart21; + serial1 =3D &uart14; + }; + + wcd938x: audio-codec { + compatible =3D "qcom,wcd9385-codec"; + + pinctrl-0 =3D <&wcd_default>; + pinctrl-names =3D "default"; + + reset-gpios =3D <&tlmm 191 GPIO_ACTIVE_LOW>; + + qcom,micbias1-microvolt =3D <1800000>; + qcom,micbias2-microvolt =3D <1800000>; + qcom,micbias3-microvolt =3D <1800000>; + qcom,micbias4-microvolt =3D <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt =3D <75000 150000 237000 500000 + 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt =3D <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt =3D <50000>; + qcom,rx-device =3D <&wcd_rx>; + qcom,tx-device =3D <&wcd_tx>; + + vdd-buck-supply =3D <&vreg_l15b_1p8>; + vdd-rxtx-supply =3D <&vreg_l15b_1p8>; + vdd-io-supply =3D <&vreg_l15b_1p8>; + vdd-mic-bias-supply =3D <&vreg_bob1>; + + #sound-dai-cells =3D <1>; + }; + + chosen { + stdout-path =3D "serial0:115200n8"; + }; + + pmic-glink { + compatible =3D "qcom,x1e80100-pmic-glink", + "qcom,sm8550-pmic-glink", + "qcom,pmic-glink"; + #address-cells =3D <1>; + #size-cells =3D <0>; + orientation-gpios =3D <&tlmm 121 GPIO_ACTIVE_HIGH>, + <&tlmm 123 GPIO_ACTIVE_HIGH>, + <&tlmm 125 GPIO_ACTIVE_HIGH>; + + connector@0 { + compatible =3D "usb-c-connector"; + reg =3D <0>; + power-role =3D "dual"; + data-role =3D "dual"; + + ports { + #address-cells =3D <1>; + #size-cells =3D <0>; + + port@0 { + reg =3D <0>; + + pmic_glink_ss0_hs_in: endpoint { + remote-endpoint =3D <&usb_1_ss0_dwc3_hs>; + }; + }; + + port@1 { + reg =3D <1>; + + pmic_glink_ss0_ss_in: endpoint { + remote-endpoint =3D <&usb_1_ss0_qmpphy_out>; + }; + }; + + port@2 { + reg =3D <2>; + + pmic_glink_ss0_sbu: endpoint { + remote-endpoint =3D <&usb_1_ss0_sbu_mux>; + }; + }; + }; + }; + + connector@1 { + compatible =3D "usb-c-connector"; + reg =3D <1>; + power-role =3D "dual"; + data-role =3D "dual"; + + ports { + #address-cells =3D <1>; + #size-cells =3D <0>; + + port@0 { + reg =3D <0>; + + pmic_glink_ss1_hs_in: endpoint { + remote-endpoint =3D <&usb_1_ss1_dwc3_hs>; + }; + }; + + port@1 { + reg =3D <1>; + + pmic_glink_ss1_ss_in: endpoint { + remote-endpoint =3D <&retimer_ss1_ss_out>; + }; + }; + + port@2 { + reg =3D <2>; + + pmic_glink_ss1_con_sbu_in: endpoint { + remote-endpoint =3D <&retimer_ss1_con_sbu_out>; + }; + }; + }; + }; + + connector@2 { + compatible =3D "usb-c-connector"; + reg =3D <2>; + power-role =3D "dual"; + data-role =3D "dual"; + + ports { + #address-cells =3D <1>; + #size-cells =3D <0>; + + port@0 { + reg =3D <0>; + + pmic_glink_ss2_hs_in: endpoint { + remote-endpoint =3D <&usb_1_ss2_dwc3_hs>; + }; + }; + + port@1 { + reg =3D <1>; + + pmic_glink_ss2_ss_in: endpoint { + remote-endpoint =3D <&retimer_ss2_ss_out>; + }; + }; + + port@2 { + reg =3D <2>; + + pmic_glink_ss2_con_sbu_in: endpoint { + remote-endpoint =3D <&retimer_ss2_con_sbu_out>; + }; + }; + }; + }; + }; + + vreg_edp_3p3: regulator-edp-3p3 { + compatible =3D "regulator-fixed"; + + regulator-name =3D "VREG_EDP_3P3"; + regulator-min-microvolt =3D <3300000>; + regulator-max-microvolt =3D <3300000>; + + gpio =3D <&tlmm 70 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 =3D <&edp_reg_en>; + pinctrl-names =3D "default"; + + regulator-boot-on; + }; + + vreg_nvme: regulator-nvme { + compatible =3D "regulator-fixed"; + + regulator-name =3D "VREG_NVME_3P3"; + regulator-min-microvolt =3D <3300000>; + regulator-max-microvolt =3D <3300000>; + + gpio =3D <&tlmm 18 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 =3D <&nvme_reg_en>; + pinctrl-names =3D "default"; + + regulator-boot-on; + }; + + /* Left unused as the retimer is not used on this board. */ + vreg_rtmr0_1p15: regulator-rtmr0-1p15 { + compatible =3D "regulator-fixed"; + + regulator-name =3D "VREG_RTMR0_1P15"; + regulator-min-microvolt =3D <1150000>; + regulator-max-microvolt =3D <1150000>; + + gpio =3D <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 =3D <&usb0_pwr_1p15_reg_en>; + pinctrl-names =3D "default"; + + regulator-boot-on; + }; + + vreg_rtmr0_1p8: regulator-rtmr0-1p8 { + compatible =3D "regulator-fixed"; + + regulator-name =3D "VREG_RTMR0_1P8"; + regulator-min-microvolt =3D <1800000>; + regulator-max-microvolt =3D <1800000>; + + gpio =3D <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 =3D <&usb0_1p8_reg_en>; + pinctrl-names =3D "default"; + + regulator-boot-on; + }; + + vreg_rtmr0_3p3: regulator-rtmr0-3p3 { + compatible =3D "regulator-fixed"; + + regulator-name =3D "VREG_RTMR0_3P3"; + regulator-min-microvolt =3D <3300000>; + regulator-max-microvolt =3D <3300000>; + + gpio =3D <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 =3D <&usb0_3p3_reg_en>; + pinctrl-names =3D "default"; + + regulator-boot-on; + }; + + vreg_rtmr1_1p15: regulator-rtmr1-1p15 { + compatible =3D "regulator-fixed"; + + regulator-name =3D "VREG_RTMR1_1P15"; + regulator-min-microvolt =3D <1150000>; + regulator-max-microvolt =3D <1150000>; + + gpio =3D <&tlmm 188 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 =3D <&usb1_pwr_1p15_reg_en>; + pinctrl-names =3D "default"; + + regulator-boot-on; + }; + + vreg_rtmr1_1p8: regulator-rtmr1-1p8 { + compatible =3D "regulator-fixed"; + + regulator-name =3D "VREG_RTMR1_1P8"; + regulator-min-microvolt =3D <1800000>; + regulator-max-microvolt =3D <1800000>; + + gpio =3D <&tlmm 175 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 =3D <&usb1_pwr_1p8_reg_en>; + pinctrl-names =3D "default"; + + regulator-boot-on; + }; + + vreg_rtmr1_3p3: regulator-rtmr1-3p3 { + compatible =3D "regulator-fixed"; + + regulator-name =3D "VREG_RTMR1_3P3"; + regulator-min-microvolt =3D <3300000>; + regulator-max-microvolt =3D <3300000>; + + gpio =3D <&tlmm 186 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 =3D <&usb1_pwr_3p3_reg_en>; + pinctrl-names =3D "default"; + + regulator-boot-on; + }; + + vreg_rtmr2_1p15: regulator-rtmr2-1p15 { + compatible =3D "regulator-fixed"; + + regulator-name =3D "VREG_RTMR2_1P15"; + regulator-min-microvolt =3D <1150000>; + regulator-max-microvolt =3D <1150000>; + + gpio =3D <&tlmm 189 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 =3D <&usb2_pwr_1p15_reg_en>; + pinctrl-names =3D "default"; + + regulator-boot-on; + }; + + vreg_rtmr2_1p8: regulator-rtmr2-1p8 { + compatible =3D "regulator-fixed"; + + regulator-name =3D "VREG_RTMR2_1P8"; + regulator-min-microvolt =3D <1800000>; + regulator-max-microvolt =3D <1800000>; + + gpio =3D <&tlmm 126 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 =3D <&usb2_pwr_1p8_reg_en>; + pinctrl-names =3D "default"; + + regulator-boot-on; + }; + + vreg_rtmr2_3p3: regulator-rtmr2-3p3 { + compatible =3D "regulator-fixed"; + + regulator-name =3D "VREG_RTMR2_3P3"; + regulator-min-microvolt =3D <3300000>; + regulator-max-microvolt =3D <3300000>; + + gpio =3D <&tlmm 187 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 =3D <&usb2_pwr_3p3_reg_en>; + pinctrl-names =3D "default"; + + regulator-boot-on; + }; + + vph_pwr: regulator-vph-pwr { + compatible =3D "regulator-fixed"; + + regulator-name =3D "vph_pwr"; + regulator-min-microvolt =3D <3700000>; + regulator-max-microvolt =3D <3700000>; + + regulator-always-on; + regulator-boot-on; + }; + + /* + * TODO: These two regulators are actually part of the removable M.2 + * card and not the CRD mainboard. Need to describe this differently. + * Functionally it works correctly, because all we need to do is to + * turn on the actual 3.3V supply above. + */ + vreg_wcn_0p95: regulator-wcn-0p95 { + compatible =3D "regulator-fixed"; + + regulator-name =3D "VREG_WCN_0P95"; + regulator-min-microvolt =3D <950000>; + regulator-max-microvolt =3D <950000>; + + vin-supply =3D <&vreg_wcn_3p3>; + }; + + vreg_wcn_1p9: regulator-wcn-1p9 { + compatible =3D "regulator-fixed"; + + regulator-name =3D "VREG_WCN_1P9"; + regulator-min-microvolt =3D <1900000>; + regulator-max-microvolt =3D <1900000>; + + vin-supply =3D <&vreg_wcn_3p3>; + }; + + vreg_wcn_3p3: regulator-wcn-3p3 { + compatible =3D "regulator-fixed"; + + regulator-name =3D "VREG_WCN_3P3"; + regulator-min-microvolt =3D <3300000>; + regulator-max-microvolt =3D <3300000>; + + gpio =3D <&tlmm 214 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 =3D <&wcn_sw_en>; + pinctrl-names =3D "default"; + + regulator-always-on; + }; + + vreg_wwan: regulator-wwan { + compatible =3D "regulator-fixed"; + + regulator-name =3D "SDX_VPH_PWR"; + regulator-min-microvolt =3D <3300000>; + regulator-max-microvolt =3D <3300000>; + + gpio =3D <&tlmm 221 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 =3D <&wwan_sw_en>; + pinctrl-names =3D "default"; + + regulator-boot-on; + }; + + sound { + compatible =3D "qcom,x1e80100-sndcard"; + model =3D "X1E80100-EVK"; + audio-routing =3D "WooferLeft IN", "WSA WSA_SPK1 OUT", + "TweeterLeft IN", "WSA WSA_SPK2 OUT", + "WooferRight IN", "WSA2 WSA_SPK2 OUT", + "TweeterRight IN", "WSA2 WSA_SPK2 OUT", + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "MIC BIAS3", + "VA DMIC1", "MIC BIAS3", + "VA DMIC2", "MIC BIAS1", + "VA DMIC3", "MIC BIAS1", + "TX SWR_INPUT1", "ADC2_OUTPUT"; + + wcd-playback-dai-link { + link-name =3D "WCD Playback"; + + codec { + sound-dai =3D <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>; + }; + + cpu { + sound-dai =3D <&q6apmbedai RX_CODEC_DMA_RX_0>; + }; + + platform { + sound-dai =3D <&q6apm>; + }; + }; + + wcd-capture-dai-link { + link-name =3D "WCD Capture"; + + codec { + sound-dai =3D <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>; + }; + + cpu { + sound-dai =3D <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + platform { + sound-dai =3D <&q6apm>; + }; + }; + + wsa-dai-link { + link-name =3D "WSA Playback"; + + codec { + sound-dai =3D <&left_woofer>, + <&left_tweeter>, + <&swr0 0>, + <&lpass_wsamacro 0>, + <&right_woofer>, + <&right_tweeter>, + <&swr3 0>, + <&lpass_wsa2macro 0>; + }; + + cpu { + sound-dai =3D <&q6apmbedai WSA_CODEC_DMA_RX_0>; + }; + + platform { + sound-dai =3D <&q6apm>; + }; + }; + + va-dai-link { + link-name =3D "VA Capture"; + + codec { + sound-dai =3D <&lpass_vamacro 0>; + }; + + cpu { + sound-dai =3D <&q6apmbedai VA_CODEC_DMA_TX_0>; + }; + + platform { + sound-dai =3D <&q6apm>; + }; + }; + }; + + usb-1-ss0-sbu-mux { + compatible =3D "onnn,fsusb42", "gpio-sbu-mux"; + + enable-gpios =3D <&tlmm 168 GPIO_ACTIVE_LOW>; + select-gpios =3D <&tlmm 167 GPIO_ACTIVE_HIGH>; + + pinctrl-0 =3D <&usb_1_ss0_sbu_default>; + pinctrl-names =3D "default"; + + mode-switch; + orientation-switch; + + port { + usb_1_ss0_sbu_mux: endpoint { + remote-endpoint =3D <&pmic_glink_ss0_sbu>; + }; + }; + }; + + wcn7850-pmu { + compatible =3D "qcom,wcn7850-pmu"; + + vdd-supply =3D <&vreg_wcn_0p95>; + vddio-supply =3D <&vreg_l15b_1p8>; + vddaon-supply =3D <&vreg_wcn_0p95>; + vdddig-supply =3D <&vreg_wcn_0p95>; + vddrfa1p2-supply =3D <&vreg_wcn_1p9>; + vddrfa1p8-supply =3D <&vreg_wcn_1p9>; + + bt-enable-gpios =3D <&tlmm 116 GPIO_ACTIVE_HIGH>; + wlan-enable-gpios =3D <&tlmm 117 GPIO_ACTIVE_HIGH>; + + pinctrl-0 =3D <&wcn_bt_en>; + pinctrl-names =3D "default"; + + regulators { + vreg_pmu_rfa_cmn: ldo0 { + regulator-name =3D "vreg_pmu_rfa_cmn"; + }; + + vreg_pmu_aon_0p59: ldo1 { + regulator-name =3D "vreg_pmu_aon_0p59"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name =3D "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p85: ldo3 { + regulator-name =3D "vreg_pmu_wlmx_0p85"; + }; + + vreg_pmu_btcmx_0p85: ldo4 { + regulator-name =3D "vreg_pmu_btcmx_0p85"; + }; + + vreg_pmu_rfa_0p8: ldo5 { + regulator-name =3D "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo6 { + regulator-name =3D "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p8: ldo7 { + regulator-name =3D "vreg_pmu_rfa_1p8"; + }; + + vreg_pmu_pcie_0p9: ldo8 { + regulator-name =3D "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_pcie_1p8: ldo9 { + regulator-name =3D "vreg_pmu_pcie_1p8"; + }; + }; + }; +}; + +&i2c1 { + clock-frequency =3D <400000>; + status =3D "okay"; + + typec-mux@8 { + compatible =3D "parade,ps8830"; + reg =3D <0x08>; + + clocks =3D <&rpmhcc RPMH_RF_CLK5>; + + vdd-supply =3D <&vreg_rtmr2_1p15>; + vdd33-supply =3D <&vreg_rtmr2_3p3>; + vdd33-cap-supply =3D <&vreg_rtmr2_3p3>; + vddar-supply =3D <&vreg_rtmr2_1p15>; + vddat-supply =3D <&vreg_rtmr2_1p15>; + vddio-supply =3D <&vreg_rtmr2_1p8>; + + reset-gpios =3D <&tlmm 185 GPIO_ACTIVE_LOW>; + + pinctrl-0 =3D <&rtmr2_default>; + pinctrl-names =3D "default"; + + orientation-switch; + retimer-switch; + + ports { + #address-cells =3D <1>; + #size-cells =3D <0>; + + port@0 { + reg =3D <0>; + + retimer_ss2_ss_out: endpoint { + remote-endpoint =3D <&pmic_glink_ss2_ss_in>; + }; + }; + + port@1 { + reg =3D <1>; + + retimer_ss2_ss_in: endpoint { + remote-endpoint =3D <&usb_1_ss2_qmpphy_out>; + }; + }; + + port@2 { + reg =3D <2>; + + retimer_ss2_con_sbu_out: endpoint { + remote-endpoint =3D <&pmic_glink_ss2_con_sbu_in>; + }; + }; + }; + }; +}; + +&i2c5 { + clock-frequency =3D <400000>; + + status =3D "okay"; + + eusb3_repeater: redriver@47 { + compatible =3D "nxp,ptn3222"; + reg =3D <0x47>; + #phy-cells =3D <0>; + + vdd3v3-supply =3D <&vreg_l13b_3p0>; + vdd1v8-supply =3D <&vreg_l4b_1p8>; + + reset-gpios =3D <&tlmm 6 GPIO_ACTIVE_LOW>; + + pinctrl-0 =3D <&eusb3_reset_n>; + pinctrl-names =3D "default"; + }; + + eusb5_repeater: redriver@43 { + compatible =3D "nxp,ptn3222"; + reg =3D <0x43>; + #phy-cells =3D <0>; + + vdd3v3-supply =3D <&vreg_l13b_3p0>; + vdd1v8-supply =3D <&vreg_l4b_1p8>; + + reset-gpios =3D <&tlmm 7 GPIO_ACTIVE_LOW>; + + pinctrl-0 =3D <&eusb5_reset_n>; + pinctrl-names =3D "default"; + }; + + eusb6_repeater: redriver@4f { + compatible =3D "nxp,ptn3222"; + reg =3D <0x4f>; + #phy-cells =3D <0>; + + vdd3v3-supply =3D <&vreg_l13b_3p0>; + vdd1v8-supply =3D <&vreg_l4b_1p8>; + + reset-gpios =3D <&tlmm 184 GPIO_ACTIVE_LOW>; + + pinctrl-0 =3D <&eusb6_reset_n>; + pinctrl-names =3D "default"; + }; +}; + +&i2c7 { + clock-frequency =3D <400000>; + + status =3D "okay"; + + typec-mux@8 { + compatible =3D "parade,ps8830"; + reg =3D <0x8>; + + clocks =3D <&rpmhcc RPMH_RF_CLK4>; + + vdd-supply =3D <&vreg_rtmr1_1p15>; + vdd33-supply =3D <&vreg_rtmr1_3p3>; + vdd33-cap-supply =3D <&vreg_rtmr1_3p3>; + vddar-supply =3D <&vreg_rtmr1_1p15>; + vddat-supply =3D <&vreg_rtmr1_1p15>; + vddio-supply =3D <&vreg_rtmr1_1p8>; + + reset-gpios =3D <&tlmm 176 GPIO_ACTIVE_LOW>; + + pinctrl-0 =3D <&rtmr1_default>; + pinctrl-names =3D "default"; + + retimer-switch; + orientation-switch; + + ports { + #address-cells =3D <1>; + #size-cells =3D <0>; + + port@0 { + reg =3D <0>; + + retimer_ss1_ss_out: endpoint { + remote-endpoint =3D <&pmic_glink_ss1_ss_in>; + }; + }; + + port@1 { + reg =3D <1>; + + retimer_ss1_ss_in: endpoint { + remote-endpoint =3D <&usb_1_ss1_qmpphy_out>; + }; + }; + + port@2 { + reg =3D <2>; + + retimer_ss1_con_sbu_out: endpoint { + remote-endpoint =3D <&pmic_glink_ss1_con_sbu_in>; + }; + }; + }; + }; +}; + +&lpass_tlmm { + spkr_01_sd_n_active: spkr-01-sd-n-active-state { + pins =3D "gpio12"; + function =3D "gpio"; + drive-strength =3D <16>; + bias-disable; + output-low; + }; + + spkr_23_sd_n_active: spkr-23-sd-n-active-state { + pins =3D "gpio13"; + function =3D "gpio"; + drive-strength =3D <16>; + bias-disable; + output-low; + }; +}; + +&lpass_vamacro { + pinctrl-0 =3D <&dmic01_default>, <&dmic23_default>; + pinctrl-names =3D "default"; + + vdd-micb-supply =3D <&vreg_l1b_1p8>; + qcom,dmic-sample-rate =3D <4800000>; +}; + +&mdss { + status =3D "okay"; +}; + +&mdss_dp0 { + status =3D "okay"; +}; + +&mdss_dp0_out { + data-lanes =3D <0 1>; + link-frequencies =3D /bits/ 64 <1620000000 2700000000 5400000000 81000000= 00>; +}; + +&mdss_dp1 { + status =3D "okay"; +}; + +&mdss_dp1_out { + data-lanes =3D <0 1>; + link-frequencies =3D /bits/ 64 <1620000000 2700000000 5400000000 81000000= 00>; +}; + +&mdss_dp2 { + status =3D "okay"; +}; + +&mdss_dp2_out { + data-lanes =3D <0 1>; + link-frequencies =3D /bits/ 64 <1620000000 2700000000 5400000000 81000000= 00>; +}; + +&mdss_dp3 { + /delete-property/ #sound-dai-cells; + + status =3D "okay"; + + aux-bus { + panel { + compatible =3D "edp-panel"; + power-supply =3D <&vreg_edp_3p3>; + + port { + edp_panel_in: endpoint { + remote-endpoint =3D <&mdss_dp3_out>; + }; + }; + }; + }; +}; + +&mdss_dp3_out { + data-lanes =3D <0 1 2 3>; + link-frequencies =3D /bits/ 64 <1620000000 2700000000 5400000000 81000000= 00>; + + remote-endpoint =3D <&edp_panel_in>; +}; + +&mdss_dp3_phy { + vdda-phy-supply =3D <&vreg_l3j_0p8>; + vdda-pll-supply =3D <&vreg_l2j_1p2>; + + status =3D "okay"; +}; + +&pcie6a { + vddpe-3v3-supply =3D <&vreg_nvme>; +}; + +&pm8550_gpios { + rtmr0_default: rtmr0-reset-n-active-state { + pins =3D "gpio10"; + function =3D "normal"; + power-source =3D <1>; /* 1.8V */ + bias-disable; + input-disable; + output-enable; + }; + + usb0_3p3_reg_en: usb0-3p3-reg-en-state { + pins =3D "gpio11"; + function =3D "normal"; + power-source =3D <1>; /* 1.8V */ + bias-disable; + input-disable; + output-enable; + }; +}; + +&pm8550ve_9_gpios { + usb0_1p8_reg_en: usb0-1p8-reg-en-state { + pins =3D "gpio8"; + function =3D "normal"; + power-source =3D <1>; /* 1.8V */ + bias-disable; + input-disable; + output-enable; + }; +}; + +&pmc8380_5_gpios { + usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state { + pins =3D "gpio8"; + function =3D "normal"; + power-source =3D <1>; /* 1.8V */ + bias-disable; + input-disable; + output-enable; + }; +}; + +&smb2360_0 { + status =3D "okay"; +}; + +&smb2360_0_eusb2_repeater { + vdd18-supply =3D <&vreg_l3d_1p8>; + vdd3-supply =3D <&vreg_l2b_3p0>; +}; + +&smb2360_1 { + status =3D "okay"; +}; + +&smb2360_1_eusb2_repeater { + vdd18-supply =3D <&vreg_l3d_1p8>; + vdd3-supply =3D <&vreg_l14b_3p0>; +}; + +&smb2360_2 { + status =3D "okay"; +}; + +&smb2360_2_eusb2_repeater { + vdd18-supply =3D <&vreg_l3d_1p8>; + vdd3-supply =3D <&vreg_l8b_3p0>; +}; + +&swr0 { + status =3D "okay"; + + pinctrl-0 =3D <&wsa_swr_active>, <&spkr_01_sd_n_active>; + pinctrl-names =3D "default"; + + /* WSA8845, Left Woofer */ + left_woofer: speaker@0,0 { + compatible =3D "sdw20217020400"; + reg =3D <0 0>; + reset-gpios =3D <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; + #sound-dai-cells =3D <0>; + sound-name-prefix =3D "WooferLeft"; + vdd-1p8-supply =3D <&vreg_l15b_1p8>; + vdd-io-supply =3D <&vreg_l12b_1p2>; + qcom,port-mapping =3D <1 2 3 7 10 13>; + }; + + /* WSA8845, Left Tweeter */ + left_tweeter: speaker@0,1 { + compatible =3D "sdw20217020400"; + reg =3D <0 1>; + reset-gpios =3D <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; + #sound-dai-cells =3D <0>; + sound-name-prefix =3D "TweeterLeft"; + vdd-1p8-supply =3D <&vreg_l15b_1p8>; + vdd-io-supply =3D <&vreg_l12b_1p2>; + qcom,port-mapping =3D <4 5 6 7 11 13>; + }; +}; + +&swr1 { + status =3D "okay"; + + /* WCD9385 RX */ + wcd_rx: codec@0,4 { + compatible =3D "sdw20217010d00"; + reg =3D <0 4>; + qcom,rx-port-mapping =3D <1 2 3 4 5>; + }; +}; + +&swr2 { + status =3D "okay"; + + /* WCD9385 TX */ + wcd_tx: codec@0,3 { + compatible =3D "sdw20217010d00"; + reg =3D <0 3>; + qcom,tx-port-mapping =3D <2 2 3 4>; + }; +}; + +&swr3 { + status =3D "okay"; + + pinctrl-0 =3D <&wsa2_swr_active>, <&spkr_23_sd_n_active>; + pinctrl-names =3D "default"; + + /* WSA8845, Right Woofer */ + right_woofer: speaker@0,0 { + compatible =3D "sdw20217020400"; + reg =3D <0 0>; + reset-gpios =3D <&lpass_tlmm 13 GPIO_ACTIVE_LOW>; + #sound-dai-cells =3D <0>; + sound-name-prefix =3D "WooferRight"; + vdd-1p8-supply =3D <&vreg_l15b_1p8>; + vdd-io-supply =3D <&vreg_l12b_1p2>; + qcom,port-mapping =3D <1 2 3 7 10 13>; + }; + + /* WSA8845, Right Tweeter */ + right_tweeter: speaker@0,1 { + compatible =3D "sdw20217020400"; + reg =3D <0 1>; + reset-gpios =3D <&lpass_tlmm 13 GPIO_ACTIVE_LOW>; + #sound-dai-cells =3D <0>; + sound-name-prefix =3D "TweeterRight"; + vdd-1p8-supply =3D <&vreg_l15b_1p8>; + vdd-io-supply =3D <&vreg_l12b_1p2>; + qcom,port-mapping =3D <4 5 6 7 11 13>; + }; +}; + +&tlmm { + edp_reg_en: edp-reg-en-state { + pins =3D "gpio70"; + function =3D "gpio"; + drive-strength =3D <16>; + bias-disable; + }; + + eusb3_reset_n: eusb3-reset-n-state { + pins =3D "gpio6"; + function =3D "gpio"; + drive-strength =3D <2>; + bias-disable; + output-low; + }; + + eusb5_reset_n: eusb5-reset-n-state { + pins =3D "gpio7"; + function =3D "gpio"; + drive-strength =3D <2>; + bias-pull-up; + output-low; + }; + + eusb6_reset_n: eusb6-reset-n-state { + pins =3D "gpio184"; + function =3D "gpio"; + drive-strength =3D <2>; + bias-pull-up; + output-low; + }; + + nvme_reg_en: nvme-reg-en-state { + pins =3D "gpio18"; + function =3D "gpio"; + drive-strength =3D <2>; + bias-disable; + }; + + rtmr1_default: rtmr1-reset-n-active-state { + pins =3D "gpio176"; + function =3D "gpio"; + drive-strength =3D <2>; + bias-disable; + }; + + rtmr2_default: rtmr2-reset-n-active-state { + pins =3D "gpio185"; + function =3D "gpio"; + drive-strength =3D <2>; + bias-disable; + }; + + usb1_pwr_1p15_reg_en: usb1-pwr-1p15-reg-en-state { + pins =3D "gpio188"; + function =3D "gpio"; + drive-strength =3D <2>; + bias-disable; + }; + + usb1_pwr_1p8_reg_en: usb1-pwr-1p8-reg-en-state { + pins =3D "gpio175"; + function =3D "gpio"; + drive-strength =3D <2>; + bias-disable; + }; + + usb1_pwr_3p3_reg_en: usb1-pwr-3p3-reg-en-state { + pins =3D "gpio186"; + function =3D "gpio"; + drive-strength =3D <2>; + bias-disable; + }; + + usb2_pwr_1p15_reg_en: usb2-pwr-1p15-reg-en-state { + pins =3D "gpio189"; + function =3D "gpio"; + drive-strength =3D <2>; + bias-disable; + }; + + usb2_pwr_1p8_reg_en: usb2-pwr-1p8-reg-en-state { + pins =3D "gpio126"; + function =3D "gpio"; + drive-strength =3D <2>; + bias-disable; + }; + + usb2_pwr_3p3_reg_en: usb2-pwr-3p3-reg-en-state { + pins =3D "gpio187"; + function =3D "gpio"; + drive-strength =3D <2>; + bias-disable; + }; + + usb_1_ss0_sbu_default: usb-1-ss0-sbu-state { + mode-pins { + pins =3D "gpio166"; + function =3D "gpio"; + bias-disable; + drive-strength =3D <2>; + output-high; + }; + + oe-n-pins { + pins =3D "gpio168"; + function =3D "gpio"; + bias-disable; + drive-strength =3D <2>; + }; + + sel-pins { + pins =3D "gpio167"; + function =3D "gpio"; + bias-disable; + drive-strength =3D <2>; + }; + }; + + wcd_default: wcd-reset-n-active-state { + pins =3D "gpio191"; + function =3D "gpio"; + drive-strength =3D <16>; + bias-disable; + output-low; + }; + + wcn_bt_en: wcn-bt-en-state { + pins =3D "gpio116"; + function =3D "gpio"; + drive-strength =3D <2>; + bias-disable; + }; + + wwan_sw_en: wwan-sw-en-state { + pins =3D "gpio221"; + function =3D "gpio"; + drive-strength =3D <4>; + bias-disable; + }; + + wcn_sw_en: wcn-sw-en-state { + pins =3D "gpio214"; + function =3D "gpio"; + drive-strength =3D <2>; + bias-disable; + }; + + /* Switches USB signal routing between the USB connector and the Wi-Fi ca= rd. */ + wcn_usb_sw_n: wcn-usb-sw-n-state { + pins =3D "gpio225"; + function =3D "gpio"; + drive-strength =3D <2>; + bias-disable; + output-high; + }; +}; + +&uart14 { + status =3D "okay"; + + bluetooth { + compatible =3D "qcom,wcn7850-bt"; + max-speed =3D <3200000>; + + vddaon-supply =3D <&vreg_pmu_aon_0p59>; + vddwlcx-supply =3D <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply =3D <&vreg_pmu_wlmx_0p85>; + vddrfacmn-supply =3D <&vreg_pmu_rfa_cmn>; + vddrfa0p8-supply =3D <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply =3D <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply =3D <&vreg_pmu_rfa_1p8>; + }; +}; + +&uart21 { + compatible =3D "qcom,geni-debug-uart"; + + status =3D "okay"; +}; + +&usb_1_ss0_dwc3_hs { + remote-endpoint =3D <&pmic_glink_ss0_hs_in>; +}; + +&usb_1_ss0_hsphy { + phys =3D <&smb2360_0_eusb2_repeater>; +}; + +&usb_1_ss0_qmpphy_out { + remote-endpoint =3D <&pmic_glink_ss0_ss_in>; +}; + +&usb_1_ss1_dwc3_hs { + remote-endpoint =3D <&pmic_glink_ss1_hs_in>; +}; + +&usb_1_ss1_hsphy { + phys =3D <&smb2360_1_eusb2_repeater>; +}; + +&usb_1_ss1_qmpphy_out { + remote-endpoint =3D <&retimer_ss1_ss_in>; +}; + +&usb_1_ss2_dwc3_hs { + remote-endpoint =3D <&pmic_glink_ss2_hs_in>; +}; + +&usb_1_ss2_hsphy { + phys =3D <&smb2360_2_eusb2_repeater>; +}; + +&usb_1_ss2_qmpphy_out { + remote-endpoint =3D <&retimer_ss2_ss_in>; +}; + +&usb_2_hsphy { + phys =3D <&eusb5_repeater>; + + pinctrl-0 =3D <&wcn_usb_sw_n>; + pinctrl-names =3D "default"; +}; + +&usb_mp_hsphy0 { + phys =3D <&eusb3_repeater>; +}; + +&usb_mp_hsphy1 { + phys =3D <&eusb6_repeater>; +}; --=20 2.34.1