From nobody Sun Oct 5 09:20:48 2025 Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 6FB0D242D88; Thu, 7 Aug 2025 07:30:28 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=205.220.168.131 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1754551830; cv=none; b=uoJ4LQjmaWkn7g9xvSQPSNpzueGdzYO92ZRZZzr/ti8aLWC1jU/AIVR1Y8et+49rqrVxb1WkglpuZW8G34m84VnzedqTLFvkx/KXeR/ynjxmipewVGktpdC9tIYjXrvv4ibmE+6HLb2AQFTOkYuBdmoji26BOH7YVAgU5OZYIYc= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1754551830; c=relaxed/simple; bh=sAyH69uESItE8aXHIr2kl3jVK8e3WgnnnfhiQiDhumM=; h=From:To:CC:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version:Content-Type; b=lG7Agy2suIQz+xOavDjHkqBCU/VfFTeBb+MVBDT84j4JNryPgmSrsZO3GNvbNT+LKlYVCNm2UgpjdDHFUcBBi5Wnh/fg70bZslu5UMRAHJfDKKFBjYTqAoUL04lgSotldnLBKBEVh6hAf3PdB/DxzhkcQcImiLsxDj0oyjtmMKg= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=quicinc.com; spf=pass smtp.mailfrom=quicinc.com; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b=eajXjZ2k; arc=none smtp.client-ip=205.220.168.131 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=quicinc.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=quicinc.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="eajXjZ2k" Received: from pps.filterd (m0279865.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.18.1.2/8.18.1.2) with ESMTP id 5776S2vp007925; Thu, 7 Aug 2025 07:30:20 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h= cc:content-transfer-encoding:content-type:date:from:in-reply-to :message-id:mime-version:references:subject:to; s=qcppdkim1; bh= z5MaIbOYz0PtLGSnt6wVXnwMFFS/2B9lNDTUOVzY3PY=; b=eajXjZ2kQ2XZor47 JhBTd8mgADQZMS/UNKW757eN8xDQ4HsuubO7AzmDAw8v/LV/RXJY0Jgzvt9DSZZp 4RgWJ7T3iTCFIGRyozDaKPKzBptuQRmgG8dL/av4LC01Urw2j+X+jQmB51j+wimd ZQMKURdWImPGdFABfux+JL46XSo/zgR5aNoWbt1soZ/wP67SosX+iZjNqOw7pYuV yALtMFfTbJ3IGsYa0J7IrWGEFQK14V1gsAySLLmd8nRaRZgn8mdIvBVLqzN0hkQ2 S1rL6KeH9DOmLe+VWbpQeYEB9ZAljECCAdYX2ukiMHwM288EqZM3LNVzJBUFjdOK 0312vg== Received: from nalasppmta01.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 48cpvy05pv-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 07 Aug 2025 07:30:20 +0000 (GMT) Received: from nalasex01b.na.qualcomm.com (nalasex01b.na.qualcomm.com [10.47.209.197]) by NALASPPMTA01.qualcomm.com (8.18.1.2/8.18.1.2) with ESMTPS id 5777UJSO002971 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 7 Aug 2025 07:30:19 GMT Received: from haixcui1-gv.qualcomm.com (10.80.80.8) by nalasex01b.na.qualcomm.com (10.47.209.197) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.1748.10; Thu, 7 Aug 2025 00:30:16 -0700 From: Haixu Cui To: , , , , , , , , , , CC: Subject: [RFC PATCH v8 2/3] virtio-spi: Add virtio-spi.h Date: Thu, 7 Aug 2025 15:29:35 +0800 Message-ID: <20250807072936.4155687-3-quic_haixcui@quicinc.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20250807072936.4155687-1-quic_haixcui@quicinc.com> References: <20250807072936.4155687-1-quic_haixcui@quicinc.com> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01b.na.qualcomm.com (10.47.209.197) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Authority-Analysis: v=2.4 cv=TJpFS0la c=1 sm=1 tr=0 ts=6894560c cx=c_pps a=ouPCqIW2jiPt+lZRy3xVPw==:117 a=ouPCqIW2jiPt+lZRy3xVPw==:17 a=GEpy-HfZoHoA:10 a=2OwXVqhp2XgA:10 a=COk6AnOGAAAA:8 a=rqJjEXyH_1KH1bkhQPcA:9 a=TjNXssC_j7lpFel5tvFf:22 X-Proofpoint-GUID: jJL_mRA02hD9EfferZ1x8RM6sTopCnnW X-Proofpoint-Spam-Details-Enc: AW1haW4tMjUwODA3MDA0NiBTYWx0ZWRfX67Ogoh3ydfwu BiDQruzK2KIHDIvkH4R+xvLMqHOd6zIEkRzRM5IMLTrHLqAB0Q+4HjD3/+zaCGXQ9fkfKWjTQg6 Cb66tbdsSBXNDDF7igFD75fQ388odJtwhe1EQImu1iXXzY3viOTHhgt+VEkoPXPS0zgejuqWXDf M9+Np6FkmxqfPy2R7sWf9Yys9hAWhj5ZJUVYjG58s9WmQXR2XASMN1IB5EAaGyuizWG5s+Jdd+m 7uvIVoM406jnPLwYHAJm+rQ0yo1OZINiga9jXCCx+aVODHuTCbCFSBKM9PITJ68OWOghhgd2w/g vqZiufwk33TUz0WUaY/vXvd9eii3l5yghna1zV64NV93y6LGSvrxv/JhbCcyInQqAwBjQfxiLcB aM2DsvUx X-Proofpoint-ORIG-GUID: jJL_mRA02hD9EfferZ1x8RM6sTopCnnW X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.293,Aquarius:18.0.1099,Hydra:6.1.9,FMLib:17.12.80.40 definitions=2025-08-06_05,2025-08-06_01,2025-03-28_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 clxscore=1015 phishscore=0 priorityscore=1501 impostorscore=0 bulkscore=0 adultscore=0 spamscore=0 malwarescore=0 suspectscore=0 classifier=typeunknown authscore=0 authtc= authcc= route=outbound adjust=0 reason=mlx scancount=1 engine=8.19.0-2507300000 definitions=main-2508070046 Content-Type: text/plain; charset="utf-8" Add virtio-spi.h header for virtio SPI. Signed-off-by: Haixu Cui --- include/uapi/linux/virtio_spi.h | 186 ++++++++++++++++++++++++++++++++ 1 file changed, 186 insertions(+) create mode 100644 include/uapi/linux/virtio_spi.h diff --git a/include/uapi/linux/virtio_spi.h b/include/uapi/linux/virtio_sp= i.h new file mode 100644 index 000000000000..c503c6f7ca09 --- /dev/null +++ b/include/uapi/linux/virtio_spi.h @@ -0,0 +1,186 @@ +/* SPDX-License-Identifier: BSD-3-Clause */ +/* + * Copyright (C) 2023 OpenSynergy GmbH + * Copyright (C) 2025 Qualcomm Innovation Center, Inc. All rights reserved. + */ +#ifndef _LINUX_VIRTIO_VIRTIO_SPI_H +#define _LINUX_VIRTIO_VIRTIO_SPI_H + +#include +#include +#include +#include + +/* Sample data on trailing clock edge */ +#define VIRTIO_SPI_CPHA BIT(0) +/* Clock is high when IDLE */ +#define VIRTIO_SPI_CPOL BIT(1) +/* Chip Select is active high */ +#define VIRTIO_SPI_CS_HIGH BIT(2) +/* Transmit LSB first */ +#define VIRTIO_SPI_MODE_LSB_FIRST BIT(3) +/* Loopback mode */ +#define VIRTIO_SPI_MODE_LOOP BIT(4) + +/* + * All config fields are read-only for the Virtio SPI driver + * + * @cs_max_number: maximum number of chipselect the host SPI controller + * supports. + * @cs_change_supported: indicates if the host SPI controller supports to = toggle + * chipselect after each transfer in one message: + * 0: unsupported, chipselect will be kept in active state throughout the + * message transaction; + * 1: supported. + * Note: Message here contains a sequence of SPI transfers. + * @tx_nbits_supported: indicates the supported number of bit for writing: + * bit 0: DUAL (2-bit transfer), 1 for supported + * bit 1: QUAD (4-bit transfer), 1 for supported + * bit 2: OCTAL (8-bit transfer), 1 for supported + * other bits are reserved as 0, 1-bit transfer is always supported. + * @rx_nbits_supported: indicates the supported number of bit for reading: + * bit 0: DUAL (2-bit transfer), 1 for supported + * bit 1: QUAD (4-bit transfer), 1 for supported + * bit 2: OCTAL (8-bit transfer), 1 for supported + * other bits are reserved as 0, 1-bit transfer is always supported. + * @bits_per_word_mask: mask indicating which values of bits_per_word are + * supported. If not set, no limitation for bits_per_word. + * @mode_func_supported: indicates the following features are supported or= not: + * bit 0-1: CPHA feature + * 0b00: invalid, should support as least one CPHA setting + * 0b01: supports CPHA=3D0 only + * 0b10: supports CPHA=3D1 only + * 0b11: supports CPHA=3D0 and CPHA=3D1. + * bit 2-3: CPOL feature + * 0b00: invalid, should support as least one CPOL setting + * 0b01: supports CPOL=3D0 only + * 0b10: supports CPOL=3D1 only + * 0b11: supports CPOL=3D0 and CPOL=3D1. + * bit 4: chipselect active high feature, 0 for unsupported and 1 for + * supported, chipselect active low is supported by default. + * bit 5: LSB first feature, 0 for unsupported and 1 for supported, + * MSB first is supported by default. + * bit 6: loopback mode feature, 0 for unsupported and 1 for supported, + * normal mode is supported by default. + * @max_freq_hz: the maximum clock rate supported in Hz unit, 0 means no + * limitation for transfer speed. + * @max_word_delay_ns: the maximum word delay supported in ns unit, + * 0 means word delay feature is unsupported. + * Note: Just as one message contains a sequence of transfers, + * one transfer may contain a sequence of words. + * @max_cs_setup_ns: the maximum delay supported after chipselect is asser= ted, + * in ns unit, 0 means delay is not supported to introduce after chipsel= ect is + * asserted. + * @max_cs_hold_ns: the maximum delay supported before chipselect is deass= erted, + * in ns unit, 0 means delay is not supported to introduce before chipse= lect + * is deasserted. + * @max_cs_incative_ns: maximum delay supported after chipselect is deasse= rted, + * in ns unit, 0 means delay is not supported to introduce after chipsel= ect is + * deasserted. + */ +struct virtio_spi_config { + /* # of /dev/spidev.CS with CS=3D0..chip_select_max_number -1 */ + __u8 cs_max_number; + __u8 cs_change_supported; +#define VIRTIO_SPI_RX_TX_SUPPORT_DUAL BIT(0) +#define VIRTIO_SPI_RX_TX_SUPPORT_QUAD BIT(1) +#define VIRTIO_SPI_RX_TX_SUPPORT_OCTAL BIT(2) + __u8 tx_nbits_supported; + __u8 rx_nbits_supported; + __le32 bits_per_word_mask; +#define VIRTIO_SPI_MF_SUPPORT_CPHA_0 BIT(0) +#define VIRTIO_SPI_MF_SUPPORT_CPHA_1 BIT(1) +#define VIRTIO_SPI_MF_SUPPORT_CPOL_0 BIT(2) +#define VIRTIO_SPI_MF_SUPPORT_CPOL_1 BIT(3) +#define VIRTIO_SPI_MF_SUPPORT_CS_HIGH BIT(4) +#define VIRTIO_SPI_MF_SUPPORT_LSB_FIRST BIT(5) +#define VIRTIO_SPI_MF_SUPPORT_LOOPBACK BIT(6) + __le32 mode_func_supported; + __le32 max_freq_hz; + __le32 max_word_delay_ns; + __le32 max_cs_setup_ns; + __le32 max_cs_hold_ns; + __le32 max_cs_inactive_ns; +}; + +/* + * @chip_select_id: chipselect index the SPI transfer used. + * + * @bits_per_word: the number of bits in each SPI transfer word. + * + * @cs_change: whether to deselect device after finishing this transfer + * before starting the next transfer, 0 means cs keep asserted and + * 1 means cs deasserted then asserted again. + * + * @tx_nbits: bus width for write transfer. + * 0,1: bus width is 1, also known as SINGLE + * 2 : bus width is 2, also known as DUAL + * 4 : bus width is 4, also known as QUAD + * 8 : bus width is 8, also known as OCTAL + * other values are invalid. + * + * @rx_nbits: bus width for read transfer. + * 0,1: bus width is 1, also known as SINGLE + * 2 : bus width is 2, also known as DUAL + * 4 : bus width is 4, also known as QUAD + * 8 : bus width is 8, also known as OCTAL + * other values are invalid. + * + * @reserved: for future use. + * + * @mode: SPI transfer mode. + * bit 0: CPHA, determines the timing (i.e. phase) of the data + * bits relative to the clock pulses.For CPHA=3D0, the + * "out" side changes the data on the trailing edge of the + * preceding clock cycle, while the "in" side captures the data + * on (or shortly after) the leading edge of the clock cycle. + * For CPHA=3D1, the "out" side changes the data on the leading + * edge of the current clock cycle, while the "in" side + * captures the data on (or shortly after) the trailing edge of + * the clock cycle. + * bit 1: CPOL, determines the polarity of the clock. CPOL=3D0 is a + * clock which idles at 0, and each cycle consists of a pulse + * of 1. CPOL=3D1 is a clock which idles at 1, and each cycle + * consists of a pulse of 0. + * bit 2: CS_HIGH, if 1, chip select active high, else active low. + * bit 3: LSB_FIRST, determines per-word bits-on-wire, if 0, MSB + * first, else LSB first. + * bit 4: LOOP, loopback mode. + * + * @freq: the transfer speed in Hz. + * + * @word_delay_ns: delay to be inserted between consecutive words of a + * transfer, in ns unit. + * + * @cs_setup_ns: delay to be introduced after CS is asserted, in ns + * unit. + * + * @cs_delay_hold_ns: delay to be introduced before CS is deasserted + * for each transfer, in ns unit. + * + * @cs_change_delay_inactive_ns: delay to be introduced after CS is + * deasserted and before next asserted, in ns unit. + */ +struct spi_transfer_head { + __u8 chip_select_id; + __u8 bits_per_word; + __u8 cs_change; + __u8 tx_nbits; + __u8 rx_nbits; + __u8 reserved[3]; + __le32 mode; + __le32 freq; + __le32 word_delay_ns; + __le32 cs_setup_ns; + __le32 cs_delay_hold_ns; + __le32 cs_change_delay_inactive_ns; +}; + +struct spi_transfer_result { +#define VIRTIO_SPI_TRANS_OK 0 +#define VIRTIO_SPI_PARAM_ERR 1 +#define VIRTIO_SPI_TRANS_ERR 2 + __u8 result; +}; + +#endif /* #ifndef _LINUX_VIRTIO_VIRTIO_SPI_H */ --=20 2.34.1