From nobody Sun Oct 5 12:49:49 2025 Received: from mailout1.samsung.com (mailout1.samsung.com [203.254.224.24]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id DBA67295511 for ; Tue, 5 Aug 2025 17:22:42 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=203.254.224.24 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1754414564; cv=none; b=TC7Qq9FtXmvJrg3Z4ZGLqD3S7qv5zaqZCChFzJUX9b4JfVnzMJcOLIC2grRAYcIymKrWXqpoPzFTUQkw9nrc0d7hOz1UIY75AhQ0XxYAMSg59bBwWz3MKfSRklKb1B/ZLsTlxqgriunTMHEVLGYXySj3udO1xO1YjInqTcLobTg= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1754414564; c=relaxed/simple; bh=xhGE4SfFUMWQ/dSjPSHqv23T1vG0Xiu7WaIgcbHLiPM=; h=From:To:Cc:Subject:Date:Message-Id:In-Reply-To:MIME-Version: Content-Type:References; b=dNBMnSDuF5G1fNB7DD+kUNKURveBeqWhM4sbf615h2uLXcSPB9yADQnmkAUI7TAyGdAH+9KiCJYEu2Jl6dHmgWvSOeA9aG0LlttD/CAx17K6h+jTSudoAJn/Pq/Qi4xJ9a7HdEp+cjcHCz8XZpukjgPC68n8R/D1VonpCrarAcA= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=samsung.com; spf=pass smtp.mailfrom=samsung.com; dkim=pass (1024-bit key) header.d=samsung.com header.i=@samsung.com header.b=a69SRcsU; arc=none smtp.client-ip=203.254.224.24 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=samsung.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=samsung.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (1024-bit key) header.d=samsung.com header.i=@samsung.com header.b="a69SRcsU" Received: from epcas5p3.samsung.com (unknown [182.195.41.41]) by mailout1.samsung.com (KnoxPortal) with ESMTP id 20250805172241epoutp013e6e077a00c04ecb645a35472633301c~Y7r_AnasL2139621396epoutp01l for ; Tue, 5 Aug 2025 17:22:41 +0000 (GMT) DKIM-Filter: OpenDKIM Filter v2.11.0 mailout1.samsung.com 20250805172241epoutp013e6e077a00c04ecb645a35472633301c~Y7r_AnasL2139621396epoutp01l DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=samsung.com; s=mail20170921; t=1754414561; bh=iKkpYwKdK0KZlmP7Y6LiFE0+1i9TafhQs3b/tKdBPds=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=a69SRcsUTv03YRx3k2NS9JbrOzyM3xeaaDEljxafnq2UcMna0CDSuomNtBVJlp+mX bAl5qFDbzSbHPZrrkZQkUW/DcCV7YKtejfBQKXicTSdzmrhCpkQ2UK2BARkFbk36mb xb3iecM0rsDbSk+hmPwysQg/zOlzhWpsUoPNSYRo= Received: from epsnrtp04.localdomain (unknown [182.195.42.156]) by epcas5p3.samsung.com (KnoxPortal) with ESMTPS id 20250805172240epcas5p3dbc3f5945f1f6124d0cf0d82aa15902c~Y7r9WJ-lQ1099810998epcas5p3n; Tue, 5 Aug 2025 17:22:40 +0000 (GMT) Received: from epcas5p3.samsung.com (unknown [182.195.38.87]) by epsnrtp04.localdomain (Postfix) with ESMTP id 4bxKxW5JH1z6B9m5; Tue, 5 Aug 2025 17:22:39 +0000 (GMT) Received: from epsmtip1.samsung.com (unknown [182.195.34.30]) by epcas5p4.samsung.com (KnoxPortal) with ESMTPA id 20250805114316epcas5p49b78db499c2e37a1fe68f4b2f0be62a7~Y3DoLelCZ2423224232epcas5p4W; Tue, 5 Aug 2025 11:43:16 +0000 (GMT) Received: from bose.samsungds.net (unknown [107.108.83.9]) by epsmtip1.samsung.com (KnoxPortal) with ESMTPA id 20250805114313epsmtip132d2e57a831cd3373fe9a57a6eabc1d1~Y3DlRM0Eq1422814228epsmtip1D; Tue, 5 Aug 2025 11:43:13 +0000 (GMT) From: Pritam Manohar Sutar To: vkoul@kernel.org, kishon@kernel.org, robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org, alim.akhtar@samsung.com, andre.draszik@linaro.org, peter.griffin@linaro.org, kauschluss@disroot.org, ivo.ivanov.ivanov1@gmail.com, igor.belwon@mentallysanemainliners.org, m.szyprowski@samsung.com, s.nawrocki@samsung.com, pritam.sutar@samsung.com Cc: linux-phy@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org, rosa.pila@samsung.com, dev.tailor@samsung.com, faraz.ata@samsung.com, muhammed.ali@samsung.com, selvarasu.g@samsung.com Subject: [PATCH v5 4/6] phy: exynos5-usbdrd: support HS combo phy for ExynosAutov920 Date: Tue, 5 Aug 2025 17:22:14 +0530 Message-Id: <20250805115216.3798121-5-pritam.sutar@samsung.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20250805115216.3798121-1-pritam.sutar@samsung.com> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable X-CMS-MailID: 20250805114316epcas5p49b78db499c2e37a1fe68f4b2f0be62a7 X-Msg-Generator: CA Content-Type: text/plain; charset="utf-8" X-Sendblock-Type: REQ_APPROVE CMS-TYPE: 105P cpgsPolicy: CPGSC10-542,Y X-CFilter-Loop: Reflected X-CMS-RootMailID: 20250805114316epcas5p49b78db499c2e37a1fe68f4b2f0be62a7 References: <20250805115216.3798121-1-pritam.sutar@samsung.com> Support UTMI+ combo phy for this SoC which is somewhat simmilar to what the existing Exynos850 support does. The difference is that some register offsets and bit fields are defferent from Exynos850. Add required change in phy driver to support combo HS phy for this SoC. Signed-off-by: Pritam Manohar Sutar --- drivers/phy/samsung/phy-exynos5-usbdrd.c | 210 +++++++++++++++++++++++ 1 file changed, 210 insertions(+) diff --git a/drivers/phy/samsung/phy-exynos5-usbdrd.c b/drivers/phy/samsung= /phy-exynos5-usbdrd.c index 5400dd23e500..c22f4de7d094 100644 --- a/drivers/phy/samsung/phy-exynos5-usbdrd.c +++ b/drivers/phy/samsung/phy-exynos5-usbdrd.c @@ -41,6 +41,13 @@ #define EXYNOS2200_CLKRST_LINK_PCLK_SEL BIT(1) =20 #define EXYNOS2200_DRD_UTMI 0x10 + +/* ExynosAutov920 bits */ +#define UTMICTL_FORCE_UTMI_SUSPEND BIT(13) +#define UTMICTL_FORCE_UTMI_SLEEP BIT(12) +#define UTMICTL_FORCE_DPPULLDOWN BIT(9) +#define UTMICTL_FORCE_DMPULLDOWN BIT(8) + #define EXYNOS2200_UTMI_FORCE_VBUSVALID BIT(1) #define EXYNOS2200_UTMI_FORCE_BVALID BIT(0) =20 @@ -250,6 +257,22 @@ #define EXYNOS850_DRD_HSP_TEST 0x5c #define HSP_TEST_SIDDQ BIT(24) =20 +#define EXYNOSAUTOV920_DRD_HSP_CLKRST 0x100 +#define HSPCLKRST_PHY20_SW_PORTRESET BIT(3) +#define HSPCLKRST_PHY20_SW_POR BIT(1) +#define HSPCLKRST_PHY20_SW_POR_SEL BIT(0) + +#define EXYNOSAUTOV920_DRD_HSPCTL 0x104 +#define HSPCTRL_VBUSVLDEXTSEL BIT(13) +#define HSPCTRL_VBUSVLDEXT BIT(12) +#define HSPCTRL_EN_UTMISUSPEND BIT(9) +#define HSPCTRL_COMMONONN BIT(8) + +#define EXYNOSAUTOV920_DRD_HSP_TEST 0x10c + +#define EXYNOSAUTOV920_DRD_HSPPLLTUNE 0x110 +#define HSPPLLTUNE_FSEL GENMASK(18, 16) + /* Exynos9 - GS101 */ #define EXYNOS850_DRD_SECPMACTL 0x48 #define SECPMACTL_PMA_ROPLL_REF_CLK_SEL GENMASK(13, 12) @@ -2054,6 +2077,139 @@ static const struct exynos5_usbdrd_phy_drvdata exyn= os990_usbdrd_phy =3D { .n_regulators =3D ARRAY_SIZE(exynos5_regulator_names), }; =20 +static void +exynosautov920_usbdrd_utmi_init(struct exynos5_usbdrd_phy *phy_drd) +{ + void __iomem *reg_phy =3D phy_drd->reg_phy; + u32 reg; + + /* + * Disable HWACG (hardware auto clock gating control). This + * forces QACTIVE signal in Q-Channel interface to HIGH level, + * to make sure the PHY clock is not gated by the hardware. + */ + reg =3D readl(reg_phy + EXYNOS850_DRD_LINKCTRL); + reg |=3D LINKCTRL_FORCE_QACT; + writel(reg, reg_phy + EXYNOS850_DRD_LINKCTRL); + + /* De-assert link reset */ + reg =3D readl(reg_phy + EXYNOS2200_DRD_CLKRST); + reg &=3D ~CLKRST_LINK_SW_RST; + writel(reg, reg_phy + EXYNOS2200_DRD_CLKRST); + + /* Set PHY POR High */ + reg =3D readl(reg_phy + EXYNOSAUTOV920_DRD_HSP_CLKRST); + reg |=3D HSPCLKRST_PHY20_SW_POR | HSPCLKRST_PHY20_SW_POR_SEL; + writel(reg, reg_phy + EXYNOSAUTOV920_DRD_HSP_CLKRST); + + /* Enable UTMI+ */ + reg =3D readl(reg_phy + EXYNOS2200_DRD_UTMI); + reg &=3D ~(UTMICTL_FORCE_UTMI_SUSPEND | UTMICTL_FORCE_UTMI_SLEEP | + UTMICTL_FORCE_DPPULLDOWN | UTMICTL_FORCE_DMPULLDOWN); + writel(reg, reg_phy + EXYNOS2200_DRD_UTMI); + + /* set phy clock & control HS phy */ + reg =3D readl(reg_phy + EXYNOSAUTOV920_DRD_HSPCTL); + reg |=3D HSPCTRL_EN_UTMISUSPEND | HSPCTRL_COMMONONN; + writel(reg, reg_phy + EXYNOSAUTOV920_DRD_HSPCTL); + + fsleep(100); + + /* Set VBUS Valid and DP-Pull up control by VBUS pad usage */ + reg =3D readl(reg_phy + EXYNOS850_DRD_LINKCTRL); + reg |=3D FIELD_PREP_CONST(LINKCTRL_BUS_FILTER_BYPASS, 0xf); + writel(reg, reg_phy + EXYNOS850_DRD_LINKCTRL); + + reg =3D readl(reg_phy + EXYNOS2200_DRD_UTMI); + reg |=3D EXYNOS2200_UTMI_FORCE_VBUSVALID | EXYNOS2200_UTMI_FORCE_BVALID; + writel(reg, reg_phy + EXYNOS2200_DRD_UTMI); + + reg =3D readl(reg_phy + EXYNOSAUTOV920_DRD_HSPCTL); + reg |=3D HSPCTRL_VBUSVLDEXTSEL | HSPCTRL_VBUSVLDEXT; + writel(reg, reg_phy + EXYNOSAUTOV920_DRD_HSPCTL); + + /* Setting FSEL for refference clock */ + reg =3D readl(reg_phy + EXYNOSAUTOV920_DRD_HSPPLLTUNE); + reg &=3D ~HSPPLLTUNE_FSEL; + switch (phy_drd->extrefclk) { + case EXYNOS5_FSEL_50MHZ: + reg |=3D FIELD_PREP(HSPPLLTUNE_FSEL, 7); + break; + case EXYNOS5_FSEL_26MHZ: + reg |=3D FIELD_PREP(HSPPLLTUNE_FSEL, 6); + break; + case EXYNOS5_FSEL_24MHZ: + reg |=3D FIELD_PREP(HSPPLLTUNE_FSEL, 2); + break; + case EXYNOS5_FSEL_20MHZ: + reg |=3D FIELD_PREP(HSPPLLTUNE_FSEL, 1); + break; + case EXYNOS5_FSEL_19MHZ2: + reg |=3D FIELD_PREP(HSPPLLTUNE_FSEL, 0); + break; + default: + dev_warn(phy_drd->dev, "unsupported ref clk: %#.2x\n", + phy_drd->extrefclk); + break; + } + writel(reg, reg_phy + EXYNOSAUTOV920_DRD_HSPPLLTUNE); + + /* Enable PHY Power Mode */ + reg =3D readl(reg_phy + EXYNOSAUTOV920_DRD_HSP_TEST); + reg &=3D ~HSP_TEST_SIDDQ; + writel(reg, reg_phy + EXYNOSAUTOV920_DRD_HSP_TEST); + + /* before POR low, 10us delay is needed to Finish PHY reset */ + fsleep(10); + + /* Set PHY POR Low */ + reg =3D readl(reg_phy + EXYNOSAUTOV920_DRD_HSP_CLKRST); + reg |=3D HSPCLKRST_PHY20_SW_POR_SEL; + reg &=3D ~(HSPCLKRST_PHY20_SW_POR | HSPCLKRST_PHY20_SW_PORTRESET); + writel(reg, reg_phy + EXYNOSAUTOV920_DRD_HSP_CLKRST); + + /* after POR low and delay 75us, PHYCLOCK is guaranteed. */ + fsleep(75); + + /* force pipe3 signal for link */ + reg =3D readl(reg_phy + EXYNOS850_DRD_LINKCTRL); + reg |=3D LINKCTRL_FORCE_PIPE_EN; + reg &=3D ~LINKCTRL_FORCE_PHYSTATUS; + reg |=3D LINKCTRL_FORCE_RXELECIDLE; + writel(reg, reg_phy + EXYNOS850_DRD_LINKCTRL); +} + +static void +exynosautov920_usbdrd_hsphy_disable(struct exynos5_usbdrd_phy *phy_drd) +{ + u32 reg; + void __iomem *reg_phy =3D phy_drd->reg_phy; + + /* set phy clock & control HS phy */ + reg =3D readl(reg_phy + EXYNOS2200_DRD_UTMI); + reg |=3D UTMICTL_FORCE_UTMI_SUSPEND | UTMICTL_FORCE_UTMI_SLEEP; + reg &=3D ~(UTMICTL_FORCE_DPPULLDOWN | UTMICTL_FORCE_DMPULLDOWN); + writel(reg, reg_phy + EXYNOS2200_DRD_UTMI); + + /* Disable PHY Power Mode */ + reg =3D readl(reg_phy + EXYNOSAUTOV920_DRD_HSP_TEST); + reg |=3D HSP_TEST_SIDDQ; + writel(reg, reg_phy + EXYNOSAUTOV920_DRD_HSP_TEST); + + /* clear force q-channel */ + reg =3D readl(reg_phy + EXYNOS850_DRD_LINKCTRL); + reg &=3D ~LINKCTRL_FORCE_QACT; + writel(reg, reg_phy + EXYNOS850_DRD_LINKCTRL); + + /* link sw reset is need for USB_DP/DM high-z in host mode */ + reg =3D readl(reg_phy + EXYNOS2200_DRD_CLKRST); + reg |=3D CLKRST_LINK_SW_RST; + writel(reg, reg_phy + EXYNOS2200_DRD_CLKRST); + fsleep(10); + reg &=3D ~CLKRST_LINK_SW_RST; + writel(reg, reg_phy + EXYNOS2200_DRD_CLKRST); +} + static int exynosautov920_usbdrd_phy_init(struct phy *phy) { struct phy_usb_instance *inst =3D phy_get_drvdata(phy); @@ -2095,6 +2251,27 @@ static int exynosautov920_usbdrd_phy_exit(struct phy= *phy) return 0; } =20 +static int exynosautov920_usbdrd_combo_phy_exit(struct phy *phy) +{ + struct phy_usb_instance *inst =3D phy_get_drvdata(phy); + struct exynos5_usbdrd_phy *phy_drd =3D to_usbdrd_phy(inst); + int ret =3D 0; + + ret =3D clk_bulk_prepare_enable(phy_drd->drv_data->n_clks, phy_drd->clks); + if (ret) + return ret; + + if (inst->phy_cfg->id =3D=3D EXYNOS5_DRDPHY_UTMI) + exynosautov920_usbdrd_hsphy_disable(phy_drd); + + /* enable PHY isol */ + inst->phy_cfg->phy_isol(inst, true); + + clk_bulk_disable_unprepare(phy_drd->drv_data->n_clks, phy_drd->clks); + + return 0; +} + static int exynosautov920_usbdrd_phy_power_on(struct phy *phy) { int ret; @@ -2146,6 +2323,36 @@ static const char * const exynosautov920_usb20_regul= ators[] =3D { "dvdd075-usb20", "vdd18-usb20", "vdd33-usb20", }; =20 +static const struct phy_ops exynosautov920_usbdrd_combo_hsphy_ops =3D { + .init =3D exynosautov920_usbdrd_phy_init, + .exit =3D exynosautov920_usbdrd_combo_phy_exit, + .power_on =3D exynosautov920_usbdrd_phy_power_on, + .power_off =3D exynosautov920_usbdrd_phy_power_off, + .owner =3D THIS_MODULE, +}; + +static const struct +exynos5_usbdrd_phy_config usbdrd_hsphy_cfg_exynosautov920[] =3D { + { + .id =3D EXYNOS5_DRDPHY_UTMI, + .phy_isol =3D exynos5_usbdrd_phy_isol, + .phy_init =3D exynosautov920_usbdrd_utmi_init, + }, +}; + +static const +struct exynos5_usbdrd_phy_drvdata exynosautov920_usbdrd_combo_hsphy =3D { + .phy_cfg =3D usbdrd_hsphy_cfg_exynosautov920, + .phy_ops =3D &exynosautov920_usbdrd_combo_hsphy_ops, + .pmu_offset_usbdrd0_phy =3D EXYNOSAUTOV920_PHY_CTRL_USB20, + .clk_names =3D exynos5_clk_names, + .n_clks =3D ARRAY_SIZE(exynos5_clk_names), + .core_clk_names =3D exynos5_core_clk_names, + .n_core_clks =3D ARRAY_SIZE(exynos5_core_clk_names), + .regulator_names =3D exynosautov920_usb20_regulators, + .n_regulators =3D ARRAY_SIZE(exynosautov920_usb20_regulators), +}; + static const struct phy_ops exynosautov920_usbdrd_phy_ops =3D { .init =3D exynosautov920_usbdrd_phy_init, .exit =3D exynosautov920_usbdrd_phy_exit, @@ -2380,6 +2587,9 @@ static const struct of_device_id exynos5_usbdrd_phy_o= f_match[] =3D { }, { .compatible =3D "samsung,exynos990-usbdrd-phy", .data =3D &exynos990_usbdrd_phy + }, { + .compatible =3D "samsung,exynosautov920-usbdrd-combo-hsphy", + .data =3D &exynosautov920_usbdrd_combo_hsphy }, { .compatible =3D "samsung,exynosautov920-usbdrd-phy", .data =3D &exynosautov920_usbdrd_phy --=20 2.34.1