From nobody Mon Oct 6 20:59:30 2025 Received: from relay9-d.mail.gandi.net (relay9-d.mail.gandi.net [217.70.183.199]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id E4606247284; Thu, 17 Jul 2025 07:30:28 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=217.70.183.199 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1752737431; cv=none; b=AtewS84h2TO1JI3kQBTkKzpFvfEHNCZ+s38y753Tgg1YfUdmHbrcwxFtPqvRuTLn7vl3F5kRaxOJKOUjW1rcP3DLhrSdx0bmBqlt4k+sgGXrQUyiklkRK9PUNokOGyFtfKsrn/iW6h1j56E/lgRjs/sFqDnapoTaN3xe8Yrw8Wc= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1752737431; c=relaxed/simple; bh=2uf2bdwFU3+tZjiyaZT2w427HJ2x2+GGdbNWfFwTGKk=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=hL28b3ohecsn6HQODJPiersbIzl5moeWJ/F1zjefRZe2LZ4eM2FavoL2GYPLI3djN3ekVDeRhJvIs31Vg6S7JbWHhic+3bISaG7h3G6l00bxRjHVlpu91vxV16LZgMmj1sfYRo3BSzI2NyzOJNrl25b/G7NpZcfeWAxgJar3jD0= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com; spf=pass smtp.mailfrom=bootlin.com; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b=Szms/Qcl; arc=none smtp.client-ip=217.70.183.199 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=bootlin.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b="Szms/Qcl" Received: by mail.gandi.net (Postfix) with ESMTPSA id A58FD443F0; Thu, 17 Jul 2025 07:30:25 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1752737427; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=dM/MxXwZM4JNpmXHIms3pqTblHekBr9bx4S2Pvawmkg=; b=Szms/QclDtKGGs12fwRCCMuAszlr4BMfJajAMSXdyL2aqL8RtjqqTir0xvaMwGRVklhH5F Ts4XzC0b3JpE/aBIuAIHljKunzCoW+wu23kOR/rr9uFGy0fUr3i/n1B3QsDV+i4MXYnPSH LXJ/27gQq9Pl1VfTKiT0+BC2HlxOGE51ERChzDl9muCuBlWWqJubRwXcHleiH4jrbV4IAb mhxCsvUfCJxwSAKCPgJe13n1E5C2hnFPKKRxgxpJWidcC3Ndu5/yXX136nrbGGz+zebG2j zsKgrYaExvygfgOYlk4zSvfLTILumCOIwOKRPOTHXPdkwqKNn5w1tE4c9Gc6yw== From: Maxime Chevallier To: davem@davemloft.net Cc: Maxime Chevallier , netdev@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, thomas.petazzoni@bootlin.com, Andrew Lunn , Jakub Kicinski , Eric Dumazet , Paolo Abeni , Russell King , linux-arm-kernel@lists.infradead.org, Christophe Leroy , Herve Codina , Florian Fainelli , Heiner Kallweit , Vladimir Oltean , =?UTF-8?q?K=C3=B6ry=20Maincent?= , =?UTF-8?q?Marek=20Beh=C3=BAn?= , Oleksij Rempel , =?UTF-8?q?Nicol=C3=B2=20Veronese?= , Simon Horman , mwojtas@chromium.org, Antoine Tenart , devicetree@vger.kernel.org, Conor Dooley , Krzysztof Kozlowski , Rob Herring , Romain Gantois , Daniel Golle , Dimitri Fedrau Subject: [PATCH net-next v9 01/15] dt-bindings: net: Introduce the ethernet-connector description Date: Thu, 17 Jul 2025 09:30:05 +0200 Message-ID: <20250717073020.154010-2-maxime.chevallier@bootlin.com> X-Mailer: git-send-email 2.49.0 In-Reply-To: <20250717073020.154010-1-maxime.chevallier@bootlin.com> References: <20250717073020.154010-1-maxime.chevallier@bootlin.com> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable X-GND-State: clean X-GND-Score: -100 X-GND-Cause: gggruggvucftvghtrhhoucdtuddrgeeffedrtdefgdehleellecutefuodetggdotefrodftvfcurfhrohhfihhlvgemucfitefpfffkpdcuggftfghnshhusghstghrihgsvgenuceurghilhhouhhtmecufedtudenucesvcftvggtihhpihgvnhhtshculddquddttddmnecujfgurhephffvvefufffkofgjfhgggfestdekredtredttdenucfhrhhomhepofgrgihimhgvucevhhgvvhgrlhhlihgvrhcuoehmrgigihhmvgdrtghhvghvrghllhhivghrsegsohhothhlihhnrdgtohhmqeenucggtffrrghtthgvrhhnpeeulefgvddthfekkedugeeikeeuudekhfekgfehgfelkeekkeekhfejkefgvefhieenucffohhmrghinhepuggvvhhitggvthhrvggvrdhorhhgnecukfhppedvrgdtudemtggsudelmeekugegheemgeeltddtmeeiheeikeemvdelsgdumeelvghfheemvgektgejnecuvehluhhsthgvrhfuihiivgeptdenucfrrghrrghmpehinhgvthepvdgrtddumegtsgduleemkegugeehmeegledttdemieehieekmedvlegsudemlegvfhehmegvkegtjedphhgvlhhopehfvgguohhrrgdrhhhomhgvpdhmrghilhhfrhhomhepmhgrgihimhgvrdgthhgvvhgrlhhlihgvrhessghoohhtlhhinhdrtghomhdpnhgspghrtghpthhtohepfedupdhrtghpthhtohepuggrvhgvmhesuggrvhgvmhhlohhfthdrnhgvthdprhgtphhtthhopehmrgigihhmvgdrtghhvghvrghllhhivghrsegsohhothhlihhnrdgto hhmpdhrtghpthhtohepnhgvthguvghvsehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtoheplhhinhhugidqkhgvrhhnvghlsehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtoheplhhinhhugidqrghrmhdqmhhsmhesvhhgvghrrdhkvghrnhgvlhdrohhrghdprhgtphhtthhopehthhhomhgrshdrphgvthgriiiiohhnihessghoohhtlhhinhdrtghomhdprhgtphhtthhopegrnhgurhgvfieslhhunhhnrdgthhdprhgtphhtthhopehkuhgsrgeskhgvrhhnvghlrdhorhhg X-GND-Sasl: maxime.chevallier@bootlin.com Content-Type: text/plain; charset="utf-8" The ability to describe the physical ports of Ethernet devices is useful to describe multi-port devices, as well as to remove any ambiguity with regard to the nature of the port. Moreover, describing ports allows for a better description of features that are tied to connectors, such as PoE through the PSE-PD devices. Introduce a binding to allow describing the ports, for now with 2 attributes : - The number of lanes, which is a quite generic property that allows differentating between multiple similar technologies such as BaseT1 and "regular" BaseT (which usually means BaseT4). - The media that can be used on that port, such as BaseT for Twisted Copper, BaseC for coax copper, BaseS/L for Fiber, BaseK for backplane ethernet, etc. This allows defining the nature of the port, and therefore avoids the need for vendor-specific properties such as "micrel,fiber-mode" or "ti,fiber-mode". The port description lives in its own file, as it is intended in the future to allow describing the ports for phy-less devices. Signed-off-by: Maxime Chevallier Reviewed-by: Christophe Leroy Reviewed-by: Kory Maincent Reviewed-by: Rob Herring (Arm) --- .../bindings/net/ethernet-connector.yaml | 45 +++++++++++++++++++ .../devicetree/bindings/net/ethernet-phy.yaml | 18 ++++++++ MAINTAINERS | 1 + 3 files changed, 64 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/ethernet-connecto= r.yaml diff --git a/Documentation/devicetree/bindings/net/ethernet-connector.yaml = b/Documentation/devicetree/bindings/net/ethernet-connector.yaml new file mode 100644 index 000000000000..32ae9f45b0e4 --- /dev/null +++ b/Documentation/devicetree/bindings/net/ethernet-connector.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/ethernet-connector.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic Ethernet Connector + +maintainers: + - Maxime Chevallier + +description: + An Ethernet Connector represents the output of a network component such = as + a PHY, an Ethernet controller with no PHY, or an SFP module. + +properties: + + lanes: + description: + Defines the number of lanes on the port, that is the number of physi= cal + channels used to convey the data with the link partner. + $ref: /schemas/types.yaml#/definitions/uint32 + + media: + description: + The mediums, as defined in 802.3, that can be used on the port. + enum: + - BaseT + - BaseK + - BaseS + - BaseC + - BaseL + - BaseD + - BaseE + - BaseF + - BaseV + - BaseMLD + +required: + - lanes + - media + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Docu= mentation/devicetree/bindings/net/ethernet-phy.yaml index 71e2cd32580f..4cd8a276062c 100644 --- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml @@ -277,6 +277,17 @@ properties: =20 additionalProperties: false =20 + mdi: + type: object + + patternProperties: + '^connector-[a-f0-9]+$': + $ref: /schemas/net/ethernet-connector.yaml# + + unevaluatedProperties: false + + additionalProperties: false + required: - reg =20 @@ -313,5 +324,12 @@ examples: default-state =3D "keep"; }; }; + + mdi { + connector-0 { + lanes =3D <2>; + media =3D "BaseT"; + }; + }; }; }; diff --git a/MAINTAINERS b/MAINTAINERS index 3887d5906786..9231e6ef0a19 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8961,6 +8961,7 @@ R: Russell King L: netdev@vger.kernel.org S: Maintained F: Documentation/ABI/testing/sysfs-class-net-phydev +F: Documentation/devicetree/bindings/net/ethernet-connector.yaml F: Documentation/devicetree/bindings/net/ethernet-phy.yaml F: Documentation/devicetree/bindings/net/mdio* F: Documentation/devicetree/bindings/net/qca,ar803x.yaml --=20 2.49.0 From nobody Mon Oct 6 20:59:30 2025 Received: from relay9-d.mail.gandi.net (relay9-d.mail.gandi.net [217.70.183.199]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 7AAB824A079; Thu, 17 Jul 2025 07:30:29 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=217.70.183.199 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1752737432; cv=none; b=tmzBpWx9jsxMBPkWWp6fXfj+IGpBL+zneygFqD6rbrhQJs3HSw0o2fqQkpIg5Y9SLcxsuuAyvq7Q171ea5wjDnMH+j13XJtmV9opdbBOtNqbvBPZgjX9CQvwBQr4q5Os1SYUlZBpVINWCKyS5ABBr9pzvpVU33y6M2ChLYhFqeY= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1752737432; c=relaxed/simple; bh=ltrxwznUbbtI7Bm8ZQW/o25BKTHwqTpEjVogwiPh6XE=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=f0Iva+a1gGuhYL/c/3kScvRZz9IYZ7C5xVEUGR3DwDAegj06tOlv9gLIaebNX/jGlwwejuBb4bYOpqIFMEkhFMa5JWtlTF6kganDEx/HjTor68deuQMYrKJkDo/UFJPFDr/Zd0KqlwkW2S69Kt68BMwAs8uccXsMq+zzS1aOk4c= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com; spf=pass smtp.mailfrom=bootlin.com; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b=M81MQu7w; arc=none smtp.client-ip=217.70.183.199 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=bootlin.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b="M81MQu7w" Received: by mail.gandi.net (Postfix) with ESMTPSA id 47485443E9; Thu, 17 Jul 2025 07:30:27 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1752737428; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=elEq4TGB1p/+toB2wqJm07o1LyqtL0pBFF4yduOZLOk=; b=M81MQu7wFyylQYqe5mYGiMJCvvRMlen0fACiCKbwOQTNgK6ilQqYVm4eANB5NQX9VGtoCl nA/ddoJ0ShZhL7mWAj317EW284opuT0XT0Zxb2g3wfcI2XK80g0dHNxjaPb7UTMaDKjdup UUI3rwLyHiZmoDFpnL3kLW7B+xXHQfZt5PZ+c5m47ITfAZb892q7yPfvFuf1102etivWdL 84bdCfjBP6Y0KzJbhfwR/oVQMzy4MrCIqLwnpuRs0IzAfDipJ1ooXRO3P4DXaPxXcssutO 5HZKUDIw96S2uWNuQy6XNuYU22GD3k177UgqiBX5Mvl8ps1b0REwHD443hYjiw== From: Maxime Chevallier To: davem@davemloft.net Cc: Maxime Chevallier , netdev@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, thomas.petazzoni@bootlin.com, Andrew Lunn , Jakub Kicinski , Eric Dumazet , Paolo Abeni , Russell King , linux-arm-kernel@lists.infradead.org, Christophe Leroy , Herve Codina , Florian Fainelli , Heiner Kallweit , Vladimir Oltean , =?UTF-8?q?K=C3=B6ry=20Maincent?= , =?UTF-8?q?Marek=20Beh=C3=BAn?= , Oleksij Rempel , =?UTF-8?q?Nicol=C3=B2=20Veronese?= , Simon Horman , mwojtas@chromium.org, Antoine Tenart , devicetree@vger.kernel.org, Conor Dooley , Krzysztof Kozlowski , Rob Herring , Romain Gantois , Daniel Golle , Dimitri Fedrau Subject: [PATCH net-next v9 02/15] net: ethtool: common: Indicate that BaseT works on up to 4 lanes Date: Thu, 17 Jul 2025 09:30:06 +0200 Message-ID: <20250717073020.154010-3-maxime.chevallier@bootlin.com> X-Mailer: git-send-email 2.49.0 In-Reply-To: <20250717073020.154010-1-maxime.chevallier@bootlin.com> References: <20250717073020.154010-1-maxime.chevallier@bootlin.com> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable X-GND-State: clean X-GND-Score: -100 X-GND-Cause: gggruggvucftvghtrhhoucdtuddrgeeffedrtdefgdehleellecutefuodetggdotefrodftvfcurfhrohhfihhlvgemucfitefpfffkpdcuggftfghnshhusghstghrihgsvgenuceurghilhhouhhtmecufedtudenucesvcftvggtihhpihgvnhhtshculddquddttddmnecujfgurhephffvvefufffkofgjfhgggfestdekredtredttdenucfhrhhomhepofgrgihimhgvucevhhgvvhgrlhhlihgvrhcuoehmrgigihhmvgdrtghhvghvrghllhhivghrsegsohhothhlihhnrdgtohhmqeenucggtffrrghtthgvrhhnpeevgedtffelffelveeuleelgfejfeevvdejhfehgeefgfffvdefteegvedutefftdenucfkphepvdgrtddumegtsgduleemkegugeehmeegledttdemieehieekmedvlegsudemlegvfhehmegvkegtjeenucevlhhushhtvghrufhiiigvpedtnecurfgrrhgrmhepihhnvghtpedvrgdtudemtggsudelmeekugegheemgeeltddtmeeiheeikeemvdelsgdumeelvghfheemvgektgejpdhhvghlohepfhgvughorhgrrdhhohhmvgdpmhgrihhlfhhrohhmpehmrgigihhmvgdrtghhvghvrghllhhivghrsegsohhothhlihhnrdgtohhmpdhnsggprhgtphhtthhopeefuddprhgtphhtthhopegurghvvghmsegurghvvghmlhhofhhtrdhnvghtpdhrtghpthhtohepmhgrgihimhgvrdgthhgvvhgrlhhlihgvrhessghoohhtlhhinhdrtghomhdprhgtphhtthhopehnvghtuggvvhesvhhgvghrrdhkv ghrnhgvlhdrohhrghdprhgtphhtthhopehlihhnuhigqdhkvghrnhgvlhesvhhgvghrrdhkvghrnhgvlhdrohhrghdprhgtphhtthhopehlihhnuhigqdgrrhhmqdhmshhmsehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtohepthhhohhmrghsrdhpvghtrgiiiihonhhisegsohhothhlihhnrdgtohhmpdhrtghpthhtoheprghnughrvgifsehluhhnnhdrtghhpdhrtghpthhtohepkhhusggrsehkvghrnhgvlhdrohhrgh X-GND-Sasl: maxime.chevallier@bootlin.com Content-Type: text/plain; charset="utf-8" The way BaseT modes (Ethernet over twisted copper pairs) are represented in the kernel are through the following modes : ETHTOOL_LINK_MODE_10baseT_Half ETHTOOL_LINK_MODE_10baseT_Full ETHTOOL_LINK_MODE_100baseT_Half ETHTOOL_LINK_MODE_100baseT_Full ETHTOOL_LINK_MODE_1000baseT_Half ETHTOOL_LINK_MODE_1000baseT_Full ETHTOOL_LINK_MODE_2500baseT_Full ETHTOOL_LINK_MODE_5000baseT_Full ETHTOOL_LINK_MODE_10000baseT_Full ETHTOOL_LINK_MODE_100baseT1_Full ETHTOOL_LINK_MODE_1000baseT1_Full ETHTOOL_LINK_MODE_10baseT1L_Full ETHTOOL_LINK_MODE_10baseT1S_Full ETHTOOL_LINK_MODE_10baseT1S_Half ETHTOOL_LINK_MODE_10baseT1S_P2MP_Half ETHTOOL_LINK_MODE_10baseT1BRR_Full The baseT1* modes explicitly specify that they work on a single, unshielded twister copper pair. However, the other modes do not state the number of pairs that are used to carry the link. 10 and 100BaseT use 2 twisted copper pairs, while 1GBaseT and higher use 4 pairs. although 10 and 100BaseT use 2 pairs, they can work on a Cat3/4/5+ cables that contain 4 pairs. Change the number of pairs associated to BaseT modes to indicate the allowable number of pairs for BaseT. Further commits will then refine the minimum number of pairs required for the linkmode to work. BaseT1 modes aren't affected by this commit. Signed-off-by: Maxime Chevallier Reviewed-by: Christophe Leroy Reviewed-by: Kory Maincent --- net/ethtool/common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ethtool/common.c b/net/ethtool/common.c index 459cf25e763e..56467532a19a 100644 --- a/net/ethtool/common.c +++ b/net/ethtool/common.c @@ -267,7 +267,7 @@ static_assert(ARRAY_SIZE(link_mode_names) =3D=3D __ETHT= OOL_LINK_MODE_MASK_NBITS); #define __LINK_MODE_LANES_LR8_ER8_FR8 8 #define __LINK_MODE_LANES_LRM 1 #define __LINK_MODE_LANES_MLD2 2 -#define __LINK_MODE_LANES_T 1 +#define __LINK_MODE_LANES_T 4 #define __LINK_MODE_LANES_T1 1 #define __LINK_MODE_LANES_X 1 #define __LINK_MODE_LANES_FX 1 --=20 2.49.0 From nobody Mon Oct 6 20:59:30 2025 Received: from relay9-d.mail.gandi.net (relay9-d.mail.gandi.net [217.70.183.199]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id C67122550BA; Thu, 17 Jul 2025 07:30:31 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=217.70.183.199 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1752737435; cv=none; b=RzgSj91t5BIZiWGpfXc0u7ur6VXd4v9zsdeTpwEzuBX84izNbJ/Gi10lBgmEekMHxd6lnnwEu7c4hDeQe1MZnNbkIFfD/d4Sy4+ShHkST3IJrcU6yGp663QBjVrkp6pe1pvV73KsPKy1EosnALs72RV7jXXtbQRu5LLXJvvgijw= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1752737435; c=relaxed/simple; bh=KIzPef1ZJookXPn01JBJCVmefanRRDFWXV6zb9VPm2A=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=o3Hb6gqudo+kCX+PRRhUJfkFH51YN9+4SJdYO5YnLSAUidoLUlb9LTYS0mExVaYfsjYDdcJWKidU+g9SWh7nN4bxlcxxVDJ5Ecju3UO/IyupKfcuzASoKR+xBuOHUdchvtpL3Q0GweORq5LGT6vNV0dvfRaZKUAMz983zB/5v3w= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com; spf=pass smtp.mailfrom=bootlin.com; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b=cd6qi/41; arc=none smtp.client-ip=217.70.183.199 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=bootlin.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b="cd6qi/41" Received: by mail.gandi.net (Postfix) with ESMTPSA id C94E543A05; Thu, 17 Jul 2025 07:30:28 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1752737430; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=Ze1+nxDGPSvu1xT4TdHO2N90indg72VKE0gwGEqSOIw=; b=cd6qi/41qQMk7IQdFVJDFncurCJdBFAvd2slDety5ZfQqe2ANylhzLpnAuK/Efb1BodNQ4 HpU06+zgrmJAGnLK1uS7WGGzd/w+BT0Lnw6lHAbGn24Ar+Dz0IDGmX/qkr8f5eoMOZMrUz VBv+gF3fgdmuJd9RA4PZfyTyk4glLDH3OayykKwLe7KswycERHoYMKj2EbgGCIHMKZOBOH sPMvMUjOy7gIbmNgoxYcM5iI8QaXC4MV/UOQtG4XJrcJlN0xEnNWeVJWQqFZdcWP0KtF/y 4ztOryDC3faldOeXiNwNksNUZuYiqU8GtK5lhWzRKUON/eZaIdyl8b4sKSYySQ== From: Maxime Chevallier To: davem@davemloft.net Cc: Maxime Chevallier , netdev@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, thomas.petazzoni@bootlin.com, Andrew Lunn , Jakub Kicinski , Eric Dumazet , Paolo Abeni , Russell King , linux-arm-kernel@lists.infradead.org, Christophe Leroy , Herve Codina , Florian Fainelli , Heiner Kallweit , Vladimir Oltean , =?UTF-8?q?K=C3=B6ry=20Maincent?= , =?UTF-8?q?Marek=20Beh=C3=BAn?= , Oleksij Rempel , =?UTF-8?q?Nicol=C3=B2=20Veronese?= , Simon Horman , mwojtas@chromium.org, Antoine Tenart , devicetree@vger.kernel.org, Conor Dooley , Krzysztof Kozlowski , Rob Herring , Romain Gantois , Daniel Golle , Dimitri Fedrau Subject: [PATCH net-next v9 03/15] net: ethtool: Introduce ETHTOOL_LINK_MEDIUM_* values Date: Thu, 17 Jul 2025 09:30:07 +0200 Message-ID: <20250717073020.154010-4-maxime.chevallier@bootlin.com> X-Mailer: git-send-email 2.49.0 In-Reply-To: <20250717073020.154010-1-maxime.chevallier@bootlin.com> References: <20250717073020.154010-1-maxime.chevallier@bootlin.com> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable X-GND-State: clean X-GND-Score: -100 X-GND-Cause: gggruggvucftvghtrhhoucdtuddrgeeffedrtdefgdehleellecutefuodetggdotefrodftvfcurfhrohhfihhlvgemucfitefpfffkpdcuggftfghnshhusghstghrihgsvgenuceurghilhhouhhtmecufedtudenucesvcftvggtihhpihgvnhhtshculddquddttddmnecujfgurhephffvvefufffkofgjfhgggfestdekredtredttdenucfhrhhomhepofgrgihimhgvucevhhgvvhgrlhhlihgvrhcuoehmrgigihhmvgdrtghhvghvrghllhhivghrsegsohhothhlihhnrdgtohhmqeenucggtffrrghtthgvrhhnpeevgedtffelffelveeuleelgfejfeevvdejhfehgeefgfffvdefteegvedutefftdenucfkphepvdgrtddumegtsgduleemkegugeehmeegledttdemieehieekmedvlegsudemlegvfhehmegvkegtjeenucevlhhushhtvghrufhiiigvpedunecurfgrrhgrmhepihhnvghtpedvrgdtudemtggsudelmeekugegheemgeeltddtmeeiheeikeemvdelsgdumeelvghfheemvgektgejpdhhvghlohepfhgvughorhgrrdhhohhmvgdpmhgrihhlfhhrohhmpehmrgigihhmvgdrtghhvghvrghllhhivghrsegsohhothhlihhnrdgtohhmpdhnsggprhgtphhtthhopeefuddprhgtphhtthhopegurghvvghmsegurghvvghmlhhofhhtrdhnvghtpdhrtghpthhtohepmhgrgihimhgvrdgthhgvvhgrlhhlihgvrhessghoohhtlhhinhdrtghomhdprhgtphhtthhopehnvghtuggvvhesvhhgvghrrdhkv ghrnhgvlhdrohhrghdprhgtphhtthhopehlihhnuhigqdhkvghrnhgvlhesvhhgvghrrdhkvghrnhgvlhdrohhrghdprhgtphhtthhopehlihhnuhigqdgrrhhmqdhmshhmsehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtohepthhhohhmrghsrdhpvghtrgiiiihonhhisegsohhothhlihhnrdgtohhmpdhrtghpthhtoheprghnughrvgifsehluhhnnhdrtghhpdhrtghpthhtohepkhhusggrsehkvghrnhgvlhdrohhrgh X-GND-Sasl: maxime.chevallier@bootlin.com Content-Type: text/plain; charset="utf-8" In an effort to have a better representation of Ethernet ports, introduce enumeration values representing the various ethernet Mediums. This is part of the 802.3 naming convention, for example : 1000 Base T 4 | | | | | | | \_ lanes (4) | | \___ Medium (T =3D=3D Twisted Copper Pairs) | \_______ Baseband transmission \____________ Speed Other example : 10000 Base K X 4 | | \_ lanes (4) | \___ encoding (BaseX is 8b/10b while BaseR is 66b/64b) \_____ Medium (K is backplane ethernet) In the case of representing a physical port, only the medium and number of lanes should be relevant. One exception would be 1000BaseX, which is currently also used as a medium in what appears to be any of 1000BaseSX, 1000BaseCX and 1000BaseLX. This was reflected in the mediums associated with the 1000BaseX linkmode. These mediums are set in the net/ethtool/common.c lookup table that maintains a list of all linkmodes with their number of lanes, medium, encoding, speed and duplex. One notable exception to this is 100M BaseT Ethernet. 100BaseTX is a 2-lanes protocol but it will also work on 4-lanes cables, so the lookup table contains 2 sets of lane numbers, indicating the min number of lanes for a protocol to work and the "nominal" number of lanes as well. Another set of exceptions are linkmodes such 100000baseLR4_ER4, where the same link mode seems to represent 100GBaseLR4 and 100GBaseER4. The macro __DEFINE_LINK_MODE_PARAMS_MEDIUMS is here used to populate the .mediums bitfield with all appropriate mediums. Signed-off-by: Maxime Chevallier Reviewed-by: Christophe Leroy --- include/linux/ethtool.h | 18 ++- include/uapi/linux/ethtool.h | 20 +++ net/ethtool/common.c | 265 +++++++++++++++++++++-------------- 3 files changed, 191 insertions(+), 112 deletions(-) diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index de5bd76a400c..a0696cb840f7 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -216,13 +216,25 @@ static inline u8 *ethtool_rxfh_context_key(struct eth= tool_rxfh_context *ctx) void ethtool_rxfh_context_lost(struct net_device *dev, u32 context_id); =20 struct link_mode_info { - int speed; - u8 lanes; - u8 duplex; + int speed; + u8 min_lanes; + u8 lanes; + u8 duplex; + u16 mediums; }; =20 extern const struct link_mode_info link_mode_params[]; =20 +extern const char ethtool_link_medium_names[][ETH_GSTRING_LEN]; + +static inline const char *phy_mediums(enum ethtool_link_medium medium) +{ + if (medium >=3D __ETHTOOL_LINK_MEDIUM_LAST) + return "unknown"; + + return ethtool_link_medium_names[medium]; +} + /* declare a link mode bitmap */ #define __ETHTOOL_DECLARE_LINK_MODE_MASK(name) \ DECLARE_BITMAP(name, __ETHTOOL_LINK_MODE_MASK_NBITS) diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index 9e9afdd1238a..24d26c1f7890 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -2586,4 +2586,24 @@ enum phy_upstream { PHY_UPSTREAM_PHY, }; =20 +enum ethtool_link_medium { + ETHTOOL_LINK_MEDIUM_BASET =3D 0, + ETHTOOL_LINK_MEDIUM_BASEK, + ETHTOOL_LINK_MEDIUM_BASES, + ETHTOOL_LINK_MEDIUM_BASEC, + ETHTOOL_LINK_MEDIUM_BASEL, + ETHTOOL_LINK_MEDIUM_BASED, + ETHTOOL_LINK_MEDIUM_BASEE, + ETHTOOL_LINK_MEDIUM_BASEF, + ETHTOOL_LINK_MEDIUM_BASEV, + ETHTOOL_LINK_MEDIUM_BASEMLD, + ETHTOOL_LINK_MEDIUM_NONE, + + __ETHTOOL_LINK_MEDIUM_LAST, +}; + +#define ETHTOOL_MEDIUM_FIBER_BITS (BIT(ETHTOOL_LINK_MEDIUM_BASES) | \ + BIT(ETHTOOL_LINK_MEDIUM_BASEL) | \ + BIT(ETHTOOL_LINK_MEDIUM_BASEF)) + #endif /* _UAPI_LINUX_ETHTOOL_H */ diff --git a/net/ethtool/common.c b/net/ethtool/common.c index 56467532a19a..f0117be79952 100644 --- a/net/ethtool/common.c +++ b/net/ethtool/common.c @@ -281,12 +281,32 @@ static_assert(ARRAY_SIZE(link_mode_names) =3D=3D __ET= HTOOL_LINK_MODE_MASK_NBITS); #define __LINK_MODE_LANES_DR8_2 8 #define __LINK_MODE_LANES_T1BRR 1 =20 -#define __DEFINE_LINK_MODE_PARAMS(_speed, _type, _duplex) \ +#define __DEFINE_LINK_MODE_PARAMS_LANES(_speed, _type, _min_lanes, _lanes,= _duplex, _medium) \ [ETHTOOL_LINK_MODE(_speed, _type, _duplex)] =3D { \ .speed =3D SPEED_ ## _speed, \ + .min_lanes =3D _min_lanes, \ + .lanes =3D _lanes, \ + .duplex =3D __DUPLEX_ ## _duplex, \ + .mediums =3D BIT(ETHTOOL_LINK_MEDIUM_BASE ## _medium) \ + } + +#define __DEFINE_LINK_MODE_PARAMS(_speed, _type, _duplex, _medium) \ + [ETHTOOL_LINK_MODE(_speed, _type, _duplex)] =3D { \ + .speed =3D SPEED_ ## _speed, \ + .min_lanes =3D __LINK_MODE_LANES_ ## _type, \ + .lanes =3D __LINK_MODE_LANES_ ## _type, \ + .duplex =3D __DUPLEX_ ## _duplex, \ + .mediums =3D BIT(ETHTOOL_LINK_MEDIUM_BASE ## _medium) \ + } +#define __DEFINE_LINK_MODE_PARAMS_MEDIUMS(_speed, _type, _duplex, _mediums= ) \ + [ETHTOOL_LINK_MODE(_speed, _type, _duplex)] =3D { \ + .speed =3D SPEED_ ## _speed, \ + .min_lanes =3D __LINK_MODE_LANES_ ## _type, \ .lanes =3D __LINK_MODE_LANES_ ## _type, \ - .duplex =3D __DUPLEX_ ## _duplex \ + .duplex =3D __DUPLEX_ ## _duplex, \ + .mediums =3D (_mediums) \ } +#define __MED(_medium) (BIT(ETHTOOL_LINK_MEDIUM_BASE ## _medium)) #define __DUPLEX_Half DUPLEX_HALF #define __DUPLEX_Full DUPLEX_FULL #define __DEFINE_SPECIAL_MODE_PARAMS(_mode) \ @@ -294,138 +314,165 @@ static_assert(ARRAY_SIZE(link_mode_names) =3D=3D __= ETHTOOL_LINK_MODE_MASK_NBITS); .speed =3D SPEED_UNKNOWN, \ .lanes =3D 0, \ .duplex =3D DUPLEX_UNKNOWN, \ + .mediums =3D BIT(ETHTOOL_LINK_MEDIUM_NONE), \ } =20 const struct link_mode_info link_mode_params[] =3D { - __DEFINE_LINK_MODE_PARAMS(10, T, Half), - __DEFINE_LINK_MODE_PARAMS(10, T, Full), - __DEFINE_LINK_MODE_PARAMS(100, T, Half), - __DEFINE_LINK_MODE_PARAMS(100, T, Full), - __DEFINE_LINK_MODE_PARAMS(1000, T, Half), - __DEFINE_LINK_MODE_PARAMS(1000, T, Full), + __DEFINE_LINK_MODE_PARAMS_LANES(10, T, 2, 4, Half, T), + __DEFINE_LINK_MODE_PARAMS_LANES(10, T, 2, 4, Full, T), + __DEFINE_LINK_MODE_PARAMS_LANES(100, T, 2, 4, Half, T), + __DEFINE_LINK_MODE_PARAMS_LANES(100, T, 2, 4, Full, T), + __DEFINE_LINK_MODE_PARAMS(1000, T, Half, T), + __DEFINE_LINK_MODE_PARAMS(1000, T, Full, T), __DEFINE_SPECIAL_MODE_PARAMS(Autoneg), __DEFINE_SPECIAL_MODE_PARAMS(TP), __DEFINE_SPECIAL_MODE_PARAMS(AUI), __DEFINE_SPECIAL_MODE_PARAMS(MII), __DEFINE_SPECIAL_MODE_PARAMS(FIBRE), __DEFINE_SPECIAL_MODE_PARAMS(BNC), - __DEFINE_LINK_MODE_PARAMS(10000, T, Full), + __DEFINE_LINK_MODE_PARAMS(10000, T, Full, T), __DEFINE_SPECIAL_MODE_PARAMS(Pause), __DEFINE_SPECIAL_MODE_PARAMS(Asym_Pause), - __DEFINE_LINK_MODE_PARAMS(2500, X, Full), + __DEFINE_LINK_MODE_PARAMS_MEDIUMS(2500, X, Full, + __MED(C) | __MED(S) | __MED(L)), __DEFINE_SPECIAL_MODE_PARAMS(Backplane), - __DEFINE_LINK_MODE_PARAMS(1000, KX, Full), - __DEFINE_LINK_MODE_PARAMS(10000, KX4, Full), - __DEFINE_LINK_MODE_PARAMS(10000, KR, Full), + __DEFINE_LINK_MODE_PARAMS(1000, KX, Full, K), + __DEFINE_LINK_MODE_PARAMS(10000, KX4, Full, K), + __DEFINE_LINK_MODE_PARAMS(10000, KR, Full, K), [ETHTOOL_LINK_MODE_10000baseR_FEC_BIT] =3D { .speed =3D SPEED_10000, .lanes =3D 1, .duplex =3D DUPLEX_FULL, }, - __DEFINE_LINK_MODE_PARAMS(20000, MLD2, Full), - __DEFINE_LINK_MODE_PARAMS(20000, KR2, Full), - __DEFINE_LINK_MODE_PARAMS(40000, KR4, Full), - __DEFINE_LINK_MODE_PARAMS(40000, CR4, Full), - __DEFINE_LINK_MODE_PARAMS(40000, SR4, Full), - __DEFINE_LINK_MODE_PARAMS(40000, LR4, Full), - __DEFINE_LINK_MODE_PARAMS(56000, KR4, Full), - __DEFINE_LINK_MODE_PARAMS(56000, CR4, Full), - __DEFINE_LINK_MODE_PARAMS(56000, SR4, Full), - __DEFINE_LINK_MODE_PARAMS(56000, LR4, Full), - __DEFINE_LINK_MODE_PARAMS(25000, CR, Full), - __DEFINE_LINK_MODE_PARAMS(25000, KR, Full), - __DEFINE_LINK_MODE_PARAMS(25000, SR, Full), - __DEFINE_LINK_MODE_PARAMS(50000, CR2, Full), - __DEFINE_LINK_MODE_PARAMS(50000, KR2, Full), - __DEFINE_LINK_MODE_PARAMS(100000, KR4, Full), - __DEFINE_LINK_MODE_PARAMS(100000, SR4, Full), - __DEFINE_LINK_MODE_PARAMS(100000, CR4, Full), - __DEFINE_LINK_MODE_PARAMS(100000, LR4_ER4, Full), - __DEFINE_LINK_MODE_PARAMS(50000, SR2, Full), - __DEFINE_LINK_MODE_PARAMS(1000, X, Full), - __DEFINE_LINK_MODE_PARAMS(10000, CR, Full), - __DEFINE_LINK_MODE_PARAMS(10000, SR, Full), - __DEFINE_LINK_MODE_PARAMS(10000, LR, Full), - __DEFINE_LINK_MODE_PARAMS(10000, LRM, Full), - __DEFINE_LINK_MODE_PARAMS(10000, ER, Full), - __DEFINE_LINK_MODE_PARAMS(2500, T, Full), - __DEFINE_LINK_MODE_PARAMS(5000, T, Full), + __DEFINE_LINK_MODE_PARAMS(20000, MLD2, Full, MLD), + __DEFINE_LINK_MODE_PARAMS(20000, KR2, Full, K), + __DEFINE_LINK_MODE_PARAMS(40000, KR4, Full, K), + __DEFINE_LINK_MODE_PARAMS(40000, CR4, Full, C), + __DEFINE_LINK_MODE_PARAMS(40000, SR4, Full, S), + __DEFINE_LINK_MODE_PARAMS(40000, LR4, Full, L), + __DEFINE_LINK_MODE_PARAMS(56000, KR4, Full, K), + __DEFINE_LINK_MODE_PARAMS(56000, CR4, Full, C), + __DEFINE_LINK_MODE_PARAMS(56000, SR4, Full, S), + __DEFINE_LINK_MODE_PARAMS(56000, LR4, Full, L), + __DEFINE_LINK_MODE_PARAMS(25000, CR, Full, C), + __DEFINE_LINK_MODE_PARAMS(25000, KR, Full, K), + __DEFINE_LINK_MODE_PARAMS(25000, SR, Full, S), + __DEFINE_LINK_MODE_PARAMS(50000, CR2, Full, C), + __DEFINE_LINK_MODE_PARAMS(50000, KR2, Full, K), + __DEFINE_LINK_MODE_PARAMS(100000, KR4, Full, K), + __DEFINE_LINK_MODE_PARAMS(100000, SR4, Full, S), + __DEFINE_LINK_MODE_PARAMS(100000, CR4, Full, C), + __DEFINE_LINK_MODE_PARAMS_MEDIUMS(100000, LR4_ER4, Full, + __MED(L) | __MED(E)), + __DEFINE_LINK_MODE_PARAMS(50000, SR2, Full, S), + __DEFINE_LINK_MODE_PARAMS_MEDIUMS(1000, X, Full, + __MED(C) | __MED(S) | __MED(L)), + __DEFINE_LINK_MODE_PARAMS(10000, CR, Full, C), + __DEFINE_LINK_MODE_PARAMS(10000, SR, Full, S), + __DEFINE_LINK_MODE_PARAMS(10000, LR, Full, L), + __DEFINE_LINK_MODE_PARAMS(10000, LRM, Full, L), + __DEFINE_LINK_MODE_PARAMS(10000, ER, Full, E), + __DEFINE_LINK_MODE_PARAMS(2500, T, Full, T), + __DEFINE_LINK_MODE_PARAMS(5000, T, Full, T), __DEFINE_SPECIAL_MODE_PARAMS(FEC_NONE), __DEFINE_SPECIAL_MODE_PARAMS(FEC_RS), __DEFINE_SPECIAL_MODE_PARAMS(FEC_BASER), - __DEFINE_LINK_MODE_PARAMS(50000, KR, Full), - __DEFINE_LINK_MODE_PARAMS(50000, SR, Full), - __DEFINE_LINK_MODE_PARAMS(50000, CR, Full), - __DEFINE_LINK_MODE_PARAMS(50000, LR_ER_FR, Full), - __DEFINE_LINK_MODE_PARAMS(50000, DR, Full), - __DEFINE_LINK_MODE_PARAMS(100000, KR2, Full), - __DEFINE_LINK_MODE_PARAMS(100000, SR2, Full), - __DEFINE_LINK_MODE_PARAMS(100000, CR2, Full), - __DEFINE_LINK_MODE_PARAMS(100000, LR2_ER2_FR2, Full), - __DEFINE_LINK_MODE_PARAMS(100000, DR2, Full), - __DEFINE_LINK_MODE_PARAMS(200000, KR4, Full), - __DEFINE_LINK_MODE_PARAMS(200000, SR4, Full), - __DEFINE_LINK_MODE_PARAMS(200000, LR4_ER4_FR4, Full), - __DEFINE_LINK_MODE_PARAMS(200000, DR4, Full), - __DEFINE_LINK_MODE_PARAMS(200000, CR4, Full), - __DEFINE_LINK_MODE_PARAMS(100, T1, Full), - __DEFINE_LINK_MODE_PARAMS(1000, T1, Full), - __DEFINE_LINK_MODE_PARAMS(400000, KR8, Full), - __DEFINE_LINK_MODE_PARAMS(400000, SR8, Full), - __DEFINE_LINK_MODE_PARAMS(400000, LR8_ER8_FR8, Full), - __DEFINE_LINK_MODE_PARAMS(400000, DR8, Full), - __DEFINE_LINK_MODE_PARAMS(400000, CR8, Full), + __DEFINE_LINK_MODE_PARAMS(50000, KR, Full, K), + __DEFINE_LINK_MODE_PARAMS(50000, SR, Full, S), + __DEFINE_LINK_MODE_PARAMS(50000, CR, Full, C), + __DEFINE_LINK_MODE_PARAMS_MEDIUMS(50000, LR_ER_FR, Full, + __MED(L) | __MED(E) | __MED(F)), + __DEFINE_LINK_MODE_PARAMS(50000, DR, Full, D), + __DEFINE_LINK_MODE_PARAMS(100000, KR2, Full, K), + __DEFINE_LINK_MODE_PARAMS(100000, SR2, Full, S), + __DEFINE_LINK_MODE_PARAMS(100000, CR2, Full, C), + __DEFINE_LINK_MODE_PARAMS_MEDIUMS(100000, LR2_ER2_FR2, Full, + __MED(L) | __MED(E) | __MED(F)), + __DEFINE_LINK_MODE_PARAMS(100000, DR2, Full, D), + __DEFINE_LINK_MODE_PARAMS(200000, KR4, Full, K), + __DEFINE_LINK_MODE_PARAMS(200000, SR4, Full, S), + __DEFINE_LINK_MODE_PARAMS_MEDIUMS(200000, LR4_ER4_FR4, Full, + __MED(L) | __MED(E) | __MED(F)), + __DEFINE_LINK_MODE_PARAMS(200000, DR4, Full, D), + __DEFINE_LINK_MODE_PARAMS(200000, CR4, Full, C), + __DEFINE_LINK_MODE_PARAMS(100, T1, Full, T), + __DEFINE_LINK_MODE_PARAMS(1000, T1, Full, T), + __DEFINE_LINK_MODE_PARAMS(400000, KR8, Full, K), + __DEFINE_LINK_MODE_PARAMS(400000, SR8, Full, S), + __DEFINE_LINK_MODE_PARAMS_MEDIUMS(400000, LR8_ER8_FR8, Full, + __MED(L) | __MED(E) | __MED(F)), + __DEFINE_LINK_MODE_PARAMS(400000, DR8, Full, D), + __DEFINE_LINK_MODE_PARAMS(400000, CR8, Full, C), __DEFINE_SPECIAL_MODE_PARAMS(FEC_LLRS), - __DEFINE_LINK_MODE_PARAMS(100000, KR, Full), - __DEFINE_LINK_MODE_PARAMS(100000, SR, Full), - __DEFINE_LINK_MODE_PARAMS(100000, LR_ER_FR, Full), - __DEFINE_LINK_MODE_PARAMS(100000, DR, Full), - __DEFINE_LINK_MODE_PARAMS(100000, CR, Full), - __DEFINE_LINK_MODE_PARAMS(200000, KR2, Full), - __DEFINE_LINK_MODE_PARAMS(200000, SR2, Full), - __DEFINE_LINK_MODE_PARAMS(200000, LR2_ER2_FR2, Full), - __DEFINE_LINK_MODE_PARAMS(200000, DR2, Full), - __DEFINE_LINK_MODE_PARAMS(200000, CR2, Full), - __DEFINE_LINK_MODE_PARAMS(400000, KR4, Full), - __DEFINE_LINK_MODE_PARAMS(400000, SR4, Full), - __DEFINE_LINK_MODE_PARAMS(400000, LR4_ER4_FR4, Full), - __DEFINE_LINK_MODE_PARAMS(400000, DR4, Full), - __DEFINE_LINK_MODE_PARAMS(400000, CR4, Full), - __DEFINE_LINK_MODE_PARAMS(100, FX, Half), - __DEFINE_LINK_MODE_PARAMS(100, FX, Full), - __DEFINE_LINK_MODE_PARAMS(10, T1L, Full), - __DEFINE_LINK_MODE_PARAMS(800000, CR8, Full), - __DEFINE_LINK_MODE_PARAMS(800000, KR8, Full), - __DEFINE_LINK_MODE_PARAMS(800000, DR8, Full), - __DEFINE_LINK_MODE_PARAMS(800000, DR8_2, Full), - __DEFINE_LINK_MODE_PARAMS(800000, SR8, Full), - __DEFINE_LINK_MODE_PARAMS(800000, VR8, Full), - __DEFINE_LINK_MODE_PARAMS(10, T1S, Full), - __DEFINE_LINK_MODE_PARAMS(10, T1S, Half), - __DEFINE_LINK_MODE_PARAMS(10, T1S_P2MP, Half), - __DEFINE_LINK_MODE_PARAMS(10, T1BRR, Full), - __DEFINE_LINK_MODE_PARAMS(200000, CR, Full), - __DEFINE_LINK_MODE_PARAMS(200000, KR, Full), - __DEFINE_LINK_MODE_PARAMS(200000, DR, Full), - __DEFINE_LINK_MODE_PARAMS(200000, DR_2, Full), - __DEFINE_LINK_MODE_PARAMS(200000, SR, Full), - __DEFINE_LINK_MODE_PARAMS(200000, VR, Full), - __DEFINE_LINK_MODE_PARAMS(400000, CR2, Full), - __DEFINE_LINK_MODE_PARAMS(400000, KR2, Full), - __DEFINE_LINK_MODE_PARAMS(400000, DR2, Full), - __DEFINE_LINK_MODE_PARAMS(400000, DR2_2, Full), - __DEFINE_LINK_MODE_PARAMS(400000, SR2, Full), - __DEFINE_LINK_MODE_PARAMS(400000, VR2, Full), - __DEFINE_LINK_MODE_PARAMS(800000, CR4, Full), - __DEFINE_LINK_MODE_PARAMS(800000, KR4, Full), - __DEFINE_LINK_MODE_PARAMS(800000, DR4, Full), - __DEFINE_LINK_MODE_PARAMS(800000, DR4_2, Full), - __DEFINE_LINK_MODE_PARAMS(800000, SR4, Full), - __DEFINE_LINK_MODE_PARAMS(800000, VR4, Full), + __DEFINE_LINK_MODE_PARAMS(100000, KR, Full, K), + __DEFINE_LINK_MODE_PARAMS(100000, SR, Full, S), + __DEFINE_LINK_MODE_PARAMS_MEDIUMS(100000, LR_ER_FR, Full, + __MED(L) | __MED(E) | __MED(F)), + __DEFINE_LINK_MODE_PARAMS(100000, DR, Full, D), + __DEFINE_LINK_MODE_PARAMS(100000, CR, Full, C), + __DEFINE_LINK_MODE_PARAMS(200000, KR2, Full, K), + __DEFINE_LINK_MODE_PARAMS(200000, SR2, Full, S), + __DEFINE_LINK_MODE_PARAMS_MEDIUMS(200000, LR2_ER2_FR2, Full, + __MED(L) | __MED(E) | __MED(F)), + __DEFINE_LINK_MODE_PARAMS(200000, DR2, Full, D), + __DEFINE_LINK_MODE_PARAMS(200000, CR2, Full, C), + __DEFINE_LINK_MODE_PARAMS(400000, KR4, Full, K), + __DEFINE_LINK_MODE_PARAMS(400000, SR4, Full, S), + __DEFINE_LINK_MODE_PARAMS_MEDIUMS(400000, LR4_ER4_FR4, Full, + __MED(L) | __MED(E) | __MED(F)), + __DEFINE_LINK_MODE_PARAMS(400000, DR4, Full, D), + __DEFINE_LINK_MODE_PARAMS(400000, CR4, Full, C), + __DEFINE_LINK_MODE_PARAMS(100, FX, Half, F), + __DEFINE_LINK_MODE_PARAMS(100, FX, Full, F), + __DEFINE_LINK_MODE_PARAMS(10, T1L, Full, T), + __DEFINE_LINK_MODE_PARAMS(800000, CR8, Full, C), + __DEFINE_LINK_MODE_PARAMS(800000, KR8, Full, K), + __DEFINE_LINK_MODE_PARAMS(800000, DR8, Full, D), + __DEFINE_LINK_MODE_PARAMS(800000, DR8_2, Full, D), + __DEFINE_LINK_MODE_PARAMS(800000, SR8, Full, S), + __DEFINE_LINK_MODE_PARAMS(800000, VR8, Full, V), + __DEFINE_LINK_MODE_PARAMS(10, T1S, Full, T), + __DEFINE_LINK_MODE_PARAMS(10, T1S, Half, T), + __DEFINE_LINK_MODE_PARAMS(10, T1S_P2MP, Half, T), + __DEFINE_LINK_MODE_PARAMS(10, T1BRR, Full, T), + __DEFINE_LINK_MODE_PARAMS(200000, CR, Full, C), + __DEFINE_LINK_MODE_PARAMS(200000, KR, Full, K), + __DEFINE_LINK_MODE_PARAMS(200000, DR, Full, D), + __DEFINE_LINK_MODE_PARAMS(200000, DR_2, Full, D), + __DEFINE_LINK_MODE_PARAMS(200000, SR, Full, S), + __DEFINE_LINK_MODE_PARAMS(200000, VR, Full, V), + __DEFINE_LINK_MODE_PARAMS(400000, CR2, Full, C), + __DEFINE_LINK_MODE_PARAMS(400000, KR2, Full, K), + __DEFINE_LINK_MODE_PARAMS(400000, DR2, Full, D), + __DEFINE_LINK_MODE_PARAMS(400000, DR2_2, Full, D), + __DEFINE_LINK_MODE_PARAMS(400000, SR2, Full, S), + __DEFINE_LINK_MODE_PARAMS(400000, VR2, Full, V), + __DEFINE_LINK_MODE_PARAMS(800000, CR4, Full, C), + __DEFINE_LINK_MODE_PARAMS(800000, KR4, Full, K), + __DEFINE_LINK_MODE_PARAMS(800000, DR4, Full, D), + __DEFINE_LINK_MODE_PARAMS(800000, DR4_2, Full, D), + __DEFINE_LINK_MODE_PARAMS(800000, SR4, Full, S), + __DEFINE_LINK_MODE_PARAMS(800000, VR4, Full, V), }; static_assert(ARRAY_SIZE(link_mode_params) =3D=3D __ETHTOOL_LINK_MODE_MASK= _NBITS); EXPORT_SYMBOL_GPL(link_mode_params); =20 +const char ethtool_link_medium_names[][ETH_GSTRING_LEN] =3D { + [ETHTOOL_LINK_MEDIUM_BASET] =3D "BaseT", + [ETHTOOL_LINK_MEDIUM_BASEK] =3D "BaseK", + [ETHTOOL_LINK_MEDIUM_BASES] =3D "BaseS", + [ETHTOOL_LINK_MEDIUM_BASEC] =3D "BaseC", + [ETHTOOL_LINK_MEDIUM_BASEL] =3D "BaseL", + [ETHTOOL_LINK_MEDIUM_BASED] =3D "BaseD", + [ETHTOOL_LINK_MEDIUM_BASEE] =3D "BaseE", + [ETHTOOL_LINK_MEDIUM_BASEF] =3D "BaseF", + [ETHTOOL_LINK_MEDIUM_BASEV] =3D "BaseV", + [ETHTOOL_LINK_MEDIUM_BASEMLD] =3D "BaseMLD", + [ETHTOOL_LINK_MEDIUM_NONE] =3D "None", +}; +static_assert(ARRAY_SIZE(ethtool_link_medium_names) =3D=3D __ETHTOOL_LINK_= MEDIUM_LAST); +EXPORT_SYMBOL_GPL(ethtool_link_medium_names); + const char netif_msg_class_names[][ETH_GSTRING_LEN] =3D { [NETIF_MSG_DRV_BIT] =3D "drv", [NETIF_MSG_PROBE_BIT] =3D "probe", --=20 2.49.0 From nobody Mon Oct 6 20:59:30 2025 Received: from relay9-d.mail.gandi.net (relay9-d.mail.gandi.net [217.70.183.199]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 6379825FA00; Thu, 17 Jul 2025 07:30:33 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=217.70.183.199 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1752737436; cv=none; b=uNNDi6DJwR675nZNfU+JINmzIw0LAj1PxqNEiCTF4AZiCooXpf9qoNS/X0HQL1SSUc80bQbhwF7nCKjD0gsEkt4NrD5GBIeG9fJFpPVkS4aoelUZ31dTLIO5kKJQC0wKg69nvnDtx1uW+V1InP0qlXLaW1X4fslLexkehzKnt3U= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1752737436; c=relaxed/simple; bh=oseAwQR06NgfG6N+gAA0GwGiGbPjMcCzrJFCJ6OBhno=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=g1JSuUVzosgXupEj+KhQi5btPKAcep1RCn5tetPg5N07ydei87zbCt5wnIgUjta2gXT3Q8KF9tg/1Hb2o4BnEyvY8Jbb8GLWyOkn+adX6PhDW2xN3LQQWAzsHSOSCgEPiPn3vQx5S16Mpz6j/Sam0sqtDFuIaslzHEEkKQqpB3o= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com; spf=pass smtp.mailfrom=bootlin.com; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b=m+jLMiyW; arc=none smtp.client-ip=217.70.183.199 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=bootlin.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b="m+jLMiyW" Received: by mail.gandi.net (Postfix) with ESMTPSA id 5BA4A443EB; Thu, 17 Jul 2025 07:30:30 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1752737431; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=hD4y1SLZJQd2PH2XBfB5P8oz9CHIUFEzn5s15HZzp5k=; b=m+jLMiyWS6TwCP0qQolGWoz7FQi6b5HsSMU48ZDepL12MEuBoERqn3JAAMDa5nrAJWfO6j zRnEC0kbxR2f6bF7fFlTGsmuVQUi99f2VpOFiZ6ysRCCobeNsH3m4ZhWzPp/QG8PEbe8HL FZe9VFN01nB+ECkuufCKJSfvSA14zvCmQ+FijZmLwaPVEgdK+yio9oyrfiYFidMkaX+jQR SDWBurJGuQITrjbhZ+0MM5RxlAjS1gCDEQd40WH6lXwbCvR6Dgho/dXwyU/Sgfi1H98uOY lJR9BRlM7lgw7ihk2NxM1v16mbJLmrtuUM33DlZIQe3SBal8pudd0qBprTetMw== From: Maxime Chevallier To: davem@davemloft.net Cc: Maxime Chevallier , netdev@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, thomas.petazzoni@bootlin.com, Andrew Lunn , Jakub Kicinski , Eric Dumazet , Paolo Abeni , Russell King , linux-arm-kernel@lists.infradead.org, Christophe Leroy , Herve Codina , Florian Fainelli , Heiner Kallweit , Vladimir Oltean , =?UTF-8?q?K=C3=B6ry=20Maincent?= , =?UTF-8?q?Marek=20Beh=C3=BAn?= , Oleksij Rempel , =?UTF-8?q?Nicol=C3=B2=20Veronese?= , Simon Horman , mwojtas@chromium.org, Antoine Tenart , devicetree@vger.kernel.org, Conor Dooley , Krzysztof Kozlowski , Rob Herring , Romain Gantois , Daniel Golle , Dimitri Fedrau Subject: [PATCH net-next v9 04/15] net: phy: Introduce PHY ports representation Date: Thu, 17 Jul 2025 09:30:08 +0200 Message-ID: <20250717073020.154010-5-maxime.chevallier@bootlin.com> X-Mailer: git-send-email 2.49.0 In-Reply-To: <20250717073020.154010-1-maxime.chevallier@bootlin.com> References: <20250717073020.154010-1-maxime.chevallier@bootlin.com> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable X-GND-State: clean X-GND-Score: -100 X-GND-Cause: gggruggvucftvghtrhhoucdtuddrgeeffedrtdefgdehleellecutefuodetggdotefrodftvfcurfhrohhfihhlvgemucfitefpfffkpdcuggftfghnshhusghstghrihgsvgenuceurghilhhouhhtmecufedtudenucesvcftvggtihhpihgvnhhtshculddquddttddmnecujfgurhephffvvefufffkofgjfhgggfestdekredtredttdenucfhrhhomhepofgrgihimhgvucevhhgvvhgrlhhlihgvrhcuoehmrgigihhmvgdrtghhvghvrghllhhivghrsegsohhothhlihhnrdgtohhmqeenucggtffrrghtthgvrhhnpeevgedtffelffelveeuleelgfejfeevvdejhfehgeefgfffvdefteegvedutefftdenucfkphepvdgrtddumegtsgduleemkegugeehmeegledttdemieehieekmedvlegsudemlegvfhehmegvkegtjeenucevlhhushhtvghrufhiiigvpedunecurfgrrhgrmhepihhnvghtpedvrgdtudemtggsudelmeekugegheemgeeltddtmeeiheeikeemvdelsgdumeelvghfheemvgektgejpdhhvghlohepfhgvughorhgrrdhhohhmvgdpmhgrihhlfhhrohhmpehmrgigihhmvgdrtghhvghvrghllhhivghrsegsohhothhlihhnrdgtohhmpdhnsggprhgtphhtthhopeefuddprhgtphhtthhopegurghvvghmsegurghvvghmlhhofhhtrdhnvghtpdhrtghpthhtohepmhgrgihimhgvrdgthhgvvhgrlhhlihgvrhessghoohhtlhhinhdrtghomhdprhgtphhtthhopehnvghtuggvvhesvhhgvghrrdhkv ghrnhgvlhdrohhrghdprhgtphhtthhopehlihhnuhigqdhkvghrnhgvlhesvhhgvghrrdhkvghrnhgvlhdrohhrghdprhgtphhtthhopehlihhnuhigqdgrrhhmqdhmshhmsehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtohepthhhohhmrghsrdhpvghtrgiiiihonhhisegsohhothhlihhnrdgtohhmpdhrtghpthhtoheprghnughrvgifsehluhhnnhdrtghhpdhrtghpthhtohepkhhusggrsehkvghrnhgvlhdrohhrgh X-GND-Sasl: maxime.chevallier@bootlin.com Content-Type: text/plain; charset="utf-8" Ethernet provides a wide variety of layer 1 protocols and standards for data transmission. The front-facing ports of an interface have their own complexity and configurability. Introduce a representation of these front-facing ports. The current code is minimalistic and only support ports controlled by PHY devices, but the plan is to extend that to SFP as well as raw Ethernet MACs that don't use PHY devices. This minimal port representation allows describing the media and number of lanes of a port. From that information, we can derive the linkmodes usable on the port, which can be used to limit the capabilities of an interface. For now, the port lanes and medium is derived from devicetree, defined by the PHY driver, or populated with default values (as we assume that all PHYs expose at least one port). The typical example is 100M ethernet. 100BaseT can work using only 2 lanes on a Cat 5 cables. However, in the situation where a 10/100/1000 capable PHY is wired to its RJ45 port through 2 lanes only, we have no way of detecting that. The "max-speed" DT property can be used, but a more accurate representation can be used : mdi { connector-0 { media =3D "BaseT"; lanes =3D <2>; }; }; From that information, we can derive the max speed reachable on the port. Another benefit of having that is to avoid vendor-specific DT properties (micrel,fiber-mode or ti,fiber-mode). This basic representation is meant to be expanded, by the introduction of port ops, userspace listing of ports, and support for multi-port devices. Signed-off-by: Maxime Chevallier Reviewed-by: Christophe Leroy --- MAINTAINERS | 1 + drivers/net/phy/Makefile | 2 +- drivers/net/phy/phy-caps.h | 5 + drivers/net/phy/phy_caps.c | 58 +++++++++++ drivers/net/phy/phy_device.c | 180 +++++++++++++++++++++++++++++++++++ drivers/net/phy/phy_port.c | 135 ++++++++++++++++++++++++++ include/linux/ethtool.h | 26 +++++ include/linux/phy.h | 30 ++++++ include/linux/phy_port.h | 96 +++++++++++++++++++ 9 files changed, 532 insertions(+), 1 deletion(-) create mode 100644 drivers/net/phy/phy_port.c create mode 100644 include/linux/phy_port.h diff --git a/MAINTAINERS b/MAINTAINERS index 9231e6ef0a19..2317e420c311 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8981,6 +8981,7 @@ F: include/linux/of_net.h F: include/linux/phy.h F: include/linux/phy_fixed.h F: include/linux/phy_link_topology.h +F: include/linux/phy_port.h F: include/linux/phylib_stubs.h F: include/linux/platform_data/mdio-bcm-unimac.h F: include/linux/platform_data/mdio-gpio.h diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index b4795aaf9c1c..b4207d7d092a 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -3,7 +3,7 @@ =20 libphy-y :=3D phy.o phy-c45.o phy-core.o phy_device.o \ linkmode.o phy_link_topology.o \ - phy_caps.o mdio_bus_provider.o + phy_caps.o mdio_bus_provider.o phy_port.o mdio-bus-y +=3D mdio_bus.o mdio_device.o =20 ifdef CONFIG_PHYLIB diff --git a/drivers/net/phy/phy-caps.h b/drivers/net/phy/phy-caps.h index 157759966650..01df1bdc1516 100644 --- a/drivers/net/phy/phy-caps.h +++ b/drivers/net/phy/phy-caps.h @@ -60,4 +60,9 @@ const struct link_capabilities * phy_caps_lookup(int speed, unsigned int duplex, const unsigned long *suppo= rted, bool exact); =20 +void phy_caps_medium_get_supported(unsigned long *supported, + enum ethtool_link_medium medium, + int lanes); +u32 phy_caps_mediums_from_linkmodes(unsigned long *linkmodes); + #endif /* __PHY_CAPS_H */ diff --git a/drivers/net/phy/phy_caps.c b/drivers/net/phy/phy_caps.c index 2cc9ee97e867..96dfe17e1f71 100644 --- a/drivers/net/phy/phy_caps.c +++ b/drivers/net/phy/phy_caps.c @@ -376,3 +376,61 @@ unsigned long phy_caps_from_interface(phy_interface_t = interface) return link_caps; } EXPORT_SYMBOL_GPL(phy_caps_from_interface); + +/** + * phy_caps_medium_get_supported() - Returns linkmodes supported on a give= n medium + * @supported: After this call, contains all possible linkmodes on a given= medium, + * and with the given number of lanes. + * @medium: The medium to get the support from + * @lanes: The number of lanes used on the given medium + * + * If no match exists, the supported field is left untouched. + */ +void phy_caps_medium_get_supported(unsigned long *supported, + enum ethtool_link_medium medium, + int lanes) +{ + int i; + + for (i =3D 0; i < __ETHTOOL_LINK_MODE_MASK_NBITS; i++) { + /* Special bits such as Autoneg, Pause, Asym_pause, etc. are + * set and will be masked away by the port parent. + */ + if (link_mode_params[i].mediums =3D=3D BIT(ETHTOOL_LINK_MEDIUM_NONE)) { + linkmode_set_bit(i, supported); + continue; + } + + /* For most cases, min_lanes =3D=3D lanes, except for 10/100BaseT that w= ork + * on 2 lanes but are compatible with 4 lanes mediums + */ + if (link_mode_params[i].mediums & BIT(medium) && + link_mode_params[i].lanes >=3D lanes && + link_mode_params[i].min_lanes <=3D lanes) { + linkmode_set_bit(i, supported); + } + } +} +EXPORT_SYMBOL_GPL(phy_caps_medium_get_supported); + +/** + * phy_caps_mediums_from_linkmodes() - Get all mediums from a linkmodes li= st + * @linkmodes: A bitset of linkmodes to get the mediums from + * + * Returns: A bitset of ETHTOOL_MEDIUM_XXX values corresponding to all med= ium + * types in the linkmodes list + */ +u32 phy_caps_mediums_from_linkmodes(unsigned long *linkmodes) +{ + const struct link_mode_info *linkmode; + u32 mediums =3D 0; + int i; + + for_each_set_bit(i, linkmodes, __ETHTOOL_LINK_MODE_MASK_NBITS) { + linkmode =3D &link_mode_params[i]; + mediums |=3D linkmode->mediums; + } + + return mediums; +} +EXPORT_SYMBOL_GPL(phy_caps_mediums_from_linkmodes); diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 7556aa3dd7ee..6c6645889352 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include #include @@ -836,6 +837,13 @@ struct phy_device *phy_device_create(struct mii_bus *b= us, int addr, u32 phy_id, =20 dev->state =3D PHY_DOWN; INIT_LIST_HEAD(&dev->leds); + INIT_LIST_HEAD(&dev->ports); + + /* The driver's probe function must change that to the real number + * of ports possible on the PHY. We assume by default we are dealing + * with a single-port PHY + */ + dev->max_n_ports =3D 1; =20 mutex_init(&dev->lock); INIT_DELAYED_WORK(&dev->state_queue, phy_state_machine); @@ -1579,6 +1587,46 @@ void phy_sfp_detach(void *upstream, struct sfp_bus *= bus) } EXPORT_SYMBOL(phy_sfp_detach); =20 +static int phy_add_port(struct phy_device *phydev, struct phy_port *port) +{ + int ret =3D 0; + + if (phydev->n_ports =3D=3D phydev->max_n_ports) + return -EBUSY; + + /* We set all ports as active by default, PHY drivers may deactivate + * them (when unused) + */ + port->active =3D true; + + if (phydev->drv && phydev->drv->attach_port) + ret =3D phydev->drv->attach_port(phydev, port); + + if (ret) + return ret; + + /* The PHY driver might have added, removed or set medium/lanes info, + * so update the port supported accordingly. + */ + phy_port_update_supported(port); + + list_add(&port->head, &phydev->ports); + + phydev->n_ports++; + + return 0; +} + +static void phy_del_port(struct phy_device *phydev, struct phy_port *port) +{ + if (!phydev->n_ports) + return; + + list_del(&port->head); + + phydev->n_ports--; +} + /** * phy_sfp_probe - probe for a SFP cage attached to this PHY device * @phydev: Pointer to phy_device @@ -3312,6 +3360,131 @@ static int of_phy_leds(struct phy_device *phydev) return 0; } =20 +static void phy_cleanup_ports(struct phy_device *phydev) +{ + struct phy_port *tmp, *port; + + list_for_each_entry_safe(port, tmp, &phydev->ports, head) { + phy_del_port(phydev, port); + phy_port_destroy(port); + } +} + +static int phy_default_setup_single_port(struct phy_device *phydev) +{ + struct phy_port *port =3D phy_port_alloc(); + + if (!port) + return -ENOMEM; + + port->parent_type =3D PHY_PORT_PHY; + port->phy =3D phydev; + + /* Let the PHY driver know that this port was never described anywhere. + * This is the usual case, where we assume single-port PHY devices with + * no SFP. In that case, the port supports exactly the same thing as + * the PHY itself. + * + * However, this can also be because we have a combo-port PHY, with + * only one port described in DT, through SFP for example. + * + * In that case, the PHY driver will be in charge of saying what we can + * do on that non-represented port. + */ + port->not_described =3D true; + linkmode_copy(port->supported, phydev->supported); + port->mediums =3D phy_caps_mediums_from_linkmodes(port->supported); + + phy_add_port(phydev, port); + + return 0; +} + +static int of_phy_ports(struct phy_device *phydev) +{ + struct device_node *node =3D phydev->mdio.dev.of_node; + struct device_node *mdi; + struct phy_port *port; + int err; + + if (!IS_ENABLED(CONFIG_OF_MDIO)) + return 0; + + if (!node) + return 0; + + mdi =3D of_get_child_by_name(node, "mdi"); + if (!mdi) + return 0; + + for_each_available_child_of_node_scoped(mdi, port_node) { + port =3D phy_of_parse_port(port_node); + if (IS_ERR(port)) { + err =3D PTR_ERR(port); + goto out_err; + } + + port->parent_type =3D PHY_PORT_PHY; + port->phy =3D phydev; + err =3D phy_add_port(phydev, port); + if (err) + goto out_err; + } + of_node_put(mdi); + + return 0; + +out_err: + phy_cleanup_ports(phydev); + of_node_put(mdi); + return err; +} + +static int phy_setup_ports(struct phy_device *phydev) +{ + __ETHTOOL_DECLARE_LINK_MODE_MASK(ports_supported); + struct phy_port *port; + int ret; + + ret =3D of_phy_ports(phydev); + if (ret) + return ret; + + if (phydev->n_ports < phydev->max_n_ports) { + ret =3D phy_default_setup_single_port(phydev); + if (ret) + goto out; + } + + linkmode_zero(ports_supported); + + /* Aggregate the supported modes, which are made-up of : + * - What the PHY itself supports + * - What the sum of all ports support + */ + list_for_each_entry(port, &phydev->ports, head) + if (port->active) + linkmode_or(ports_supported, ports_supported, + port->supported); + + if (!linkmode_empty(ports_supported)) + linkmode_and(phydev->supported, phydev->supported, + ports_supported); + + /* For now, the phy->port field is set as the first active port's type */ + list_for_each_entry(port, &phydev->ports, head) + if (port->active) { + phydev->port =3D phy_port_get_type(port); + break; + } + + return 0; + +out: + phy_cleanup_ports(phydev); + return ret; +} + /** * fwnode_mdio_find_device - Given a fwnode, find the mdio_device * @fwnode: pointer to the mdio_device's fwnode @@ -3449,6 +3622,11 @@ static int phy_probe(struct device *dev) phydev->is_gigabit_capable =3D 1; =20 of_set_phy_supported(phydev); + + err =3D phy_setup_ports(phydev); + if (err) + goto out; + phy_advertise_supported(phydev); =20 /* Get PHY default EEE advertising modes and handle them as potentially @@ -3524,6 +3702,8 @@ static int phy_remove(struct device *dev) =20 phydev->state =3D PHY_DOWN; =20 + phy_cleanup_ports(phydev); + sfp_bus_del_upstream(phydev->sfp_bus); phydev->sfp_bus =3D NULL; =20 diff --git a/drivers/net/phy/phy_port.c b/drivers/net/phy/phy_port.c new file mode 100644 index 000000000000..51870f2378ec --- /dev/null +++ b/drivers/net/phy/phy_port.c @@ -0,0 +1,135 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* Framework to drive Ethernet ports + * + * Copyright (c) 2024 Maxime Chevallier + */ + +#include +#include +#include + +#include "phy-caps.h" + +/** + * phy_port_alloc() - Allocate a new phy_port + * + * Returns: a newly allocated struct phy_port, or NULL. + */ +struct phy_port *phy_port_alloc(void) +{ + struct phy_port *port; + + port =3D kzalloc(sizeof(*port), GFP_KERNEL); + if (!port) + return NULL; + + linkmode_zero(port->supported); + INIT_LIST_HEAD(&port->head); + + return port; +} +EXPORT_SYMBOL_GPL(phy_port_alloc); + +/** + * phy_port_destroy() - Free a struct phy_port + * @port: The port to destroy + */ +void phy_port_destroy(struct phy_port *port) +{ + kfree(port); +} +EXPORT_SYMBOL_GPL(phy_port_destroy); + +/** + * phy_of_parse_port() - Create a phy_port from a firmware representation + * @dn: device_node representation of the port, following the + * ethernet-connector.yaml binding + * + * Returns: a newly allocated and initialized phy_port pointer, or an ERR_= PTR. + */ +struct phy_port *phy_of_parse_port(struct device_node *dn) +{ + struct fwnode_handle *fwnode =3D of_fwnode_handle(dn); + enum ethtool_link_medium medium; + struct phy_port *port; + const char *med_str; + u32 lanes, mediums =3D 0; + int ret; + + ret =3D fwnode_property_read_u32(fwnode, "lanes", &lanes); + if (ret) + lanes =3D 0; + + ret =3D fwnode_property_read_string(fwnode, "media", &med_str); + if (ret) + return ERR_PTR(ret); + + medium =3D ethtool_str_to_medium(med_str); + if (medium =3D=3D ETHTOOL_LINK_MEDIUM_NONE) + return ERR_PTR(-EINVAL); + + mediums |=3D BIT(medium); + + if (!mediums) + return ERR_PTR(-EINVAL); + + port =3D phy_port_alloc(); + if (!port) + return ERR_PTR(-ENOMEM); + + port->lanes =3D lanes; + port->mediums =3D mediums; + + return port; +} +EXPORT_SYMBOL_GPL(phy_of_parse_port); + +/** + * phy_port_update_supported() - Setup the port->supported field + * @port: the port to update + * + * Once the port's medium list and number of lanes has been configured bas= ed + * on firmware, straps and vendor-specific properties, this function may be + * called to update the port's supported linkmodes list. + * + * Any mode that was manually set in the port's supported list remains set. + */ +void phy_port_update_supported(struct phy_port *port) +{ + __ETHTOOL_DECLARE_LINK_MODE_MASK(supported) =3D { 0 }; + int i, lanes =3D 1; + + /* If there's no lanes specified, we grab the default number of + * lanes as the max of the default lanes for each medium + */ + if (!port->lanes) + for_each_set_bit(i, &port->mediums, __ETHTOOL_LINK_MEDIUM_LAST) + lanes =3D max_t(int, lanes, phy_medium_default_lanes(i)); + + port->lanes =3D lanes; + + for_each_set_bit(i, &port->mediums, __ETHTOOL_LINK_MEDIUM_LAST) { + linkmode_zero(supported); + phy_caps_medium_get_supported(supported, i, port->lanes); + linkmode_or(port->supported, port->supported, supported); + } +} +EXPORT_SYMBOL_GPL(phy_port_update_supported); + +/** + * phy_port_get_type() - get the PORT_* attribut for that port. + * @port: The port we want the information from + * + * Returns: A PORT_XXX value. + */ +int phy_port_get_type(struct phy_port *port) +{ + if (port->mediums & BIT(ETHTOOL_LINK_MEDIUM_BASET)) + return PORT_TP; + + if (phy_port_is_fiber(port)) + return PORT_FIBRE; + + return PORT_OTHER; +} +EXPORT_SYMBOL_GPL(phy_port_get_type); diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index a0696cb840f7..baa5ec1d76ed 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -227,6 +227,10 @@ extern const struct link_mode_info link_mode_params[]; =20 extern const char ethtool_link_medium_names[][ETH_GSTRING_LEN]; =20 +#define ETHTOOL_MEDIUM_FIBER_BITS (BIT(ETHTOOL_LINK_MEDIUM_BASES) | \ + BIT(ETHTOOL_LINK_MEDIUM_BASEL) | \ + BIT(ETHTOOL_LINK_MEDIUM_BASEF)) + static inline const char *phy_mediums(enum ethtool_link_medium medium) { if (medium >=3D __ETHTOOL_LINK_MEDIUM_LAST) @@ -235,6 +239,28 @@ static inline const char *phy_mediums(enum ethtool_lin= k_medium medium) return ethtool_link_medium_names[medium]; } =20 +static inline enum ethtool_link_medium ethtool_str_to_medium(const char *s= tr) +{ + int i; + + for (i =3D 0; i < __ETHTOOL_LINK_MEDIUM_LAST; i++) + if (!strcmp(phy_mediums(i), str)) + return i; + + return ETHTOOL_LINK_MEDIUM_NONE; +} + +static inline int phy_medium_default_lanes(enum ethtool_link_medium medium) +{ + /* Let's consider that the default BaseT ethernet is BaseT4, i.e. + * Gigabit Ethernet. + */ + if (medium =3D=3D ETHTOOL_LINK_MEDIUM_BASET) + return 4; + + return 1; +} + /* declare a link mode bitmap */ #define __ETHTOOL_DECLARE_LINK_MODE_MASK(name) \ DECLARE_BITMAP(name, __ETHTOOL_LINK_MODE_MASK_NBITS) diff --git a/include/linux/phy.h b/include/linux/phy.h index 4c2b8b6e7187..cb95f9008007 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -317,6 +317,7 @@ static inline long rgmii_clock(int speed) struct device; struct kernel_hwtstamp_config; struct phylink; +struct phy_port; struct sfp_bus; struct sfp_upstream_ops; struct sk_buff; @@ -611,6 +612,9 @@ struct macsec_ops; * @master_slave_state: Current master/slave configuration * @mii_ts: Pointer to time stamper callbacks * @psec: Pointer to Power Sourcing Equipment control struct + * @ports: List of PHY ports structures + * @n_ports: Number of ports currently attached to the PHY + * @max_n_ports: Max number of ports this PHY can expose * @lock: Mutex for serialization access to PHY * @state_queue: Work queue for state machine * @link_down_events: Number of times link was lost @@ -748,6 +752,10 @@ struct phy_device { struct mii_timestamper *mii_ts; struct pse_control *psec; =20 + struct list_head ports; + int n_ports; + int max_n_ports; + u8 mdix; u8 mdix_ctrl; =20 @@ -1264,6 +1272,27 @@ struct phy_driver { * Returns the time in jiffies until the next update event. */ unsigned int (*get_next_update_time)(struct phy_device *dev); + + /** + * @attach_port: Indicates to the PHY driver that a port is detected + * @dev: PHY device to notify + * @port: The port being added + * + * Called when a port that needs to be driven by the PHY is found. The + * number of time this will be called depends on phydev->max_n_ports, + * which the driver can change in .probe(). + * + * The port that is being passed may or may not be initialized. If it is + * already initialized, it is by the generic port representation from + * devicetree, which superseeds any strapping or vendor-specific + * properties. + * + * If the port isn't initialized, the port->mediums and port->lanes + * fields must be set, possibly according to stapping information. + * + * Returns 0, or an error code. + */ + int (*attach_port)(struct phy_device *dev, struct phy_port *port); }; #define to_phy_driver(d) container_of_const(to_mdio_common_driver(d), \ struct phy_driver, mdiodrv) @@ -2001,6 +2030,7 @@ void phy_trigger_machine(struct phy_device *phydev); void phy_mac_interrupt(struct phy_device *phydev); void phy_start_machine(struct phy_device *phydev); void phy_stop_machine(struct phy_device *phydev); + void phy_ethtool_ksettings_get(struct phy_device *phydev, struct ethtool_link_ksettings *cmd); int phy_ethtool_ksettings_set(struct phy_device *phydev, diff --git a/include/linux/phy_port.h b/include/linux/phy_port.h new file mode 100644 index 000000000000..f47ac5f5ef9e --- /dev/null +++ b/include/linux/phy_port.h @@ -0,0 +1,96 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#ifndef __PHY_PORT_H +#define __PHY_PORT_H + +#include +#include +#include + +struct phy_port; + +/** + * enum phy_port_parent - The device this port is attached to + * + * @PHY_PORT_PHY: Indicates that the port is driven by a PHY device + */ +enum phy_port_parent { + PHY_PORT_PHY, +}; + +struct phy_port_ops { + /* Sometimes, the link state can be retrieved from physical, + * out-of-band channels such as the LOS signal on SFP. These + * callbacks allows notifying the port about state changes + */ + void (*link_up)(struct phy_port *port); + void (*link_down)(struct phy_port *port); + + /* If the port acts as a Media Independent Interface (Serdes port), + * configures the port with the relevant state and mode. When enable is + * not set, interface should be ignored + */ + int (*configure_mii)(struct phy_port *port, bool enable, phy_interface_t = interface); +}; + +/** + * struct phy_port - A representation of a network device physical interfa= ce + * + * @head: Used by the port's parent to list ports + * @parent_type: The type of device this port is directly connected to + * @phy: If the parent is PHY_PORT_PHYDEV, the PHY controlling that port + * @ops: Callback ops implemented by the port controller + * @lanes: The number of lanes (diff pairs) this port has, 0 if not applic= able + * @mediums: Bitmask of the physical mediums this port provides access to + * @supported: The link modes this port can expose, if this port is MDI (n= ot MII) + * @interfaces: The MII interfaces this port supports, if this port is MII + * @not_described: Indicates to the parent driver if this port isn't descr= ibed, + * so it's up to the parent to filter its capabilities. + * @active: Indicates if the port is currently part of the active link. + * @is_mii: Indicates if this port is MII (Media Independent Interface), + * or MDI (Media Dependent Interface). + */ +struct phy_port { + struct list_head head; + enum phy_port_parent parent_type; + union { + struct phy_device *phy; + }; + + const struct phy_port_ops *ops; + + int lanes; + unsigned long mediums; + __ETHTOOL_DECLARE_LINK_MODE_MASK(supported); + DECLARE_PHY_INTERFACE_MASK(interfaces); + + unsigned int not_described:1; + unsigned int active:1; + unsigned int is_mii:1; +}; + +struct phy_port *phy_port_alloc(void); +void phy_port_destroy(struct phy_port *port); + +static inline struct phy_device *port_phydev(struct phy_port *port) +{ + return port->phy; +} + +struct phy_port *phy_of_parse_port(struct device_node *dn); + +static inline bool phy_port_is_copper(struct phy_port *port) +{ + return port->mediums =3D=3D BIT(ETHTOOL_LINK_MEDIUM_BASET); +} + +static inline bool phy_port_is_fiber(struct phy_port *port) +{ + return !!(port->mediums & ETHTOOL_MEDIUM_FIBER_BITS); +} + +void phy_port_update_supported(struct phy_port *port); + +int phy_port_get_type(struct phy_port *port); + +#endif --=20 2.49.0 From nobody Mon Oct 6 20:59:30 2025 Received: from relay9-d.mail.gandi.net (relay9-d.mail.gandi.net [217.70.183.199]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id D7430263F4E; Thu, 17 Jul 2025 07:30:34 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=217.70.183.199 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1752737437; cv=none; b=skWmGcbJcCrmDJLGEUfgGwwHhNDsPerBUba5fzCbQvBxPVv4OWinqRZMkRg9o0Mt9cHYbeihlzhLo5/zyLGvL8BRnJpyykcKLQJPeuQ1+vVs2ORJGYV0pHY/BJJUPJXfYrbkRzNgW2zsvEHMv1mxTKsJqQx0lsoPvwejbaSHZnw= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1752737437; c=relaxed/simple; bh=jKEIXxkuTwcUwoucSf6XTccSsizW0Ix4t43G+EXDEcs=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=TXjEsmn+GHXZAM3mCkAVDDMs3gfFh8R3tHlG6CyvU/mTHWKFtSV+TtJZd+uFkwAsK7eaiBU3lUbzc8q8CQO87CdGZ3uty108Q1uH8lWZ7wpGz7xX8OoJKkrAvUS2N0ciyflgyiW4PN8c3/HhZZQVXn1cYiLVhoe+4GKmBm8HSa4= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com; spf=pass smtp.mailfrom=bootlin.com; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b=ehg0t9tj; arc=none smtp.client-ip=217.70.183.199 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=bootlin.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b="ehg0t9tj" Received: by mail.gandi.net (Postfix) with ESMTPSA id E5CAA443F4; Thu, 17 Jul 2025 07:30:31 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1752737433; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=eB3Z8Uwx2k5FfrPO5srrQdkG7QVl0aYpQSN+8lb6S94=; b=ehg0t9tjmXbpfeleXLydy4K2AiiHdQ8TQRFbdRDCPs8ouKDhbGaTeU0exdQkaFzhkdWYla RE4ihuSil4Nhu6zq/zYLYN/IHGnNSQcgMZWCGX/jyONyRC6GBhXbfBsvzCgs4IoDLmm0XH totuxByAKlN9i4VcssEYuIlH8Ko4BKjBI9zi1d3Gm4zwOHuGJF5Xo6fm+m2t1prI8hHSsB c3Or3z8XVcYqHIgncgBGGJz3fgMQls+j4zMjFZlFLuQt3eEEyIHzFLo35A9PFSnyHpRwPj 1yeW7z0PEFLYFS9riXw0+cWbGeiU0dMXzPhS9lxV8pnIy66M0bnEDgZuodfzuA== From: Maxime Chevallier To: davem@davemloft.net Cc: Maxime Chevallier , netdev@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, thomas.petazzoni@bootlin.com, Andrew Lunn , Jakub Kicinski , Eric Dumazet , Paolo Abeni , Russell King , linux-arm-kernel@lists.infradead.org, Christophe Leroy , Herve Codina , Florian Fainelli , Heiner Kallweit , Vladimir Oltean , =?UTF-8?q?K=C3=B6ry=20Maincent?= , =?UTF-8?q?Marek=20Beh=C3=BAn?= , Oleksij Rempel , =?UTF-8?q?Nicol=C3=B2=20Veronese?= , Simon Horman , mwojtas@chromium.org, Antoine Tenart , devicetree@vger.kernel.org, Conor Dooley , Krzysztof Kozlowski , Rob Herring , Romain Gantois , Daniel Golle , Dimitri Fedrau Subject: [PATCH net-next v9 05/15] net: phy: dp83822: Add support for phy_port representation Date: Thu, 17 Jul 2025 09:30:09 +0200 Message-ID: <20250717073020.154010-6-maxime.chevallier@bootlin.com> X-Mailer: git-send-email 2.49.0 In-Reply-To: <20250717073020.154010-1-maxime.chevallier@bootlin.com> References: <20250717073020.154010-1-maxime.chevallier@bootlin.com> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable X-GND-State: clean X-GND-Score: -100 X-GND-Cause: gggruggvucftvghtrhhoucdtuddrgeeffedrtdefgdehleellecutefuodetggdotefrodftvfcurfhrohhfihhlvgemucfitefpfffkpdcuggftfghnshhusghstghrihgsvgenuceurghilhhouhhtmecufedtudenucesvcftvggtihhpihgvnhhtshculddquddttddmnecujfgurhephffvvefufffkofgjfhgggfestdekredtredttdenucfhrhhomhepofgrgihimhgvucevhhgvvhgrlhhlihgvrhcuoehmrgigihhmvgdrtghhvghvrghllhhivghrsegsohhothhlihhnrdgtohhmqeenucggtffrrghtthgvrhhnpeevgedtffelffelveeuleelgfejfeevvdejhfehgeefgfffvdefteegvedutefftdenucfkphepvdgrtddumegtsgduleemkegugeehmeegledttdemieehieekmedvlegsudemlegvfhehmegvkegtjeenucevlhhushhtvghrufhiiigvpedunecurfgrrhgrmhepihhnvghtpedvrgdtudemtggsudelmeekugegheemgeeltddtmeeiheeikeemvdelsgdumeelvghfheemvgektgejpdhhvghlohepfhgvughorhgrrdhhohhmvgdpmhgrihhlfhhrohhmpehmrgigihhmvgdrtghhvghvrghllhhivghrsegsohhothhlihhnrdgtohhmpdhnsggprhgtphhtthhopeefuddprhgtphhtthhopegurghvvghmsegurghvvghmlhhofhhtrdhnvghtpdhrtghpthhtohepmhgrgihimhgvrdgthhgvvhgrlhhlihgvrhessghoohhtlhhinhdrtghomhdprhgtphhtthhopehnvghtuggvvhesvhhgvghrrdhkv ghrnhgvlhdrohhrghdprhgtphhtthhopehlihhnuhigqdhkvghrnhgvlhesvhhgvghrrdhkvghrnhgvlhdrohhrghdprhgtphhtthhopehlihhnuhigqdgrrhhmqdhmshhmsehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtohepthhhohhmrghsrdhpvghtrgiiiihonhhisegsohhothhlihhnrdgtohhmpdhrtghpthhtoheprghnughrvgifsehluhhnnhdrtghhpdhrtghpthhtohepkhhusggrsehkvghrnhgvlhdrohhrgh X-GND-Sasl: maxime.chevallier@bootlin.com Content-Type: text/plain; charset="utf-8" With the phy_port representation intrduced, we can use .attach_port to populate the port information based on either the straps or the ti,fiber-mode property. This allows simplifying the probe function and allow users to override the strapping configuration. Signed-off-by: Maxime Chevallier Reviewed-by: Christophe Leroy Reviewed-by: Kory Maincent --- drivers/net/phy/dp83822.c | 71 +++++++++++++++++++++++++-------------- 1 file changed, 45 insertions(+), 26 deletions(-) diff --git a/drivers/net/phy/dp83822.c b/drivers/net/phy/dp83822.c index 33db21251f2e..2657be2e9034 100644 --- a/drivers/net/phy/dp83822.c +++ b/drivers/net/phy/dp83822.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include =20 @@ -811,17 +812,6 @@ static int dp83822_of_init(struct phy_device *phydev) int i, ret; u32 val; =20 - /* Signal detection for the PHY is only enabled if the FX_EN and the - * SD_EN pins are strapped. Signal detection can only enabled if FX_EN - * is strapped otherwise signal detection is disabled for the PHY. - */ - if (dp83822->fx_enabled && dp83822->fx_sd_enable) - dp83822->fx_signal_det_low =3D device_property_present(dev, - "ti,link-loss-low"); - if (!dp83822->fx_enabled) - dp83822->fx_enabled =3D device_property_present(dev, - "ti,fiber-mode"); - if (!device_property_read_string(dev, "ti,gpio2-clk-out", &of_val)) { if (strcmp(of_val, "mac-if") =3D=3D 0) { dp83822->gpio2_clk_out =3D DP83822_CLK_SRC_MAC_IF; @@ -950,6 +940,48 @@ static int dp83822_read_straps(struct phy_device *phyd= ev) return 0; } =20 +static int dp83822_attach_port(struct phy_device *phydev, struct phy_port = *port) +{ + struct dp83822_private *dp83822 =3D phydev->priv; + int ret; + + if (port->mediums) { + if (phy_port_is_fiber(port)) + dp83822->fx_enabled =3D true; + } else { + ret =3D dp83822_read_straps(phydev); + if (ret) + return ret; + +#if IS_ENABLED(CONFIG_OF_MDIO) + if (dp83822->fx_enabled && dp83822->fx_sd_enable) + dp83822->fx_signal_det_low =3D + device_property_present(&phydev->mdio.dev, + "ti,link-loss-low"); + + /* ti,fiber-mode is still used for backwards compatibility, but + * has been replaced with the mdi node definition, see + * ethernet-port.yaml + */ + if (!dp83822->fx_enabled) + dp83822->fx_enabled =3D + device_property_present(&phydev->mdio.dev, + "ti,fiber-mode"); +#endif /* CONFIG_OF_MDIO */ + + if (dp83822->fx_enabled) { + port->lanes =3D 1; + port->mediums =3D BIT(ETHTOOL_LINK_MEDIUM_BASEF); + } else { + /* This PHY can only to 100BaseTX max, so on 2 lanes */ + port->lanes =3D 2; + port->mediums =3D BIT(ETHTOOL_LINK_MEDIUM_BASET); + } + } + + return 0; +} + static int dp8382x_probe(struct phy_device *phydev) { struct dp83822_private *dp83822; @@ -968,27 +1000,13 @@ static int dp8382x_probe(struct phy_device *phydev) =20 static int dp83822_probe(struct phy_device *phydev) { - struct dp83822_private *dp83822; int ret; =20 ret =3D dp8382x_probe(phydev); if (ret) return ret; =20 - dp83822 =3D phydev->priv; - - ret =3D dp83822_read_straps(phydev); - if (ret) - return ret; - - ret =3D dp83822_of_init(phydev); - if (ret) - return ret; - - if (dp83822->fx_enabled) - phydev->port =3D PORT_FIBRE; - - return 0; + return dp83822_of_init(phydev); } =20 static int dp83826_probe(struct phy_device *phydev) @@ -1172,6 +1190,7 @@ static int dp83822_led_hw_control_get(struct phy_devi= ce *phydev, u8 index, .led_hw_is_supported =3D dp83822_led_hw_is_supported, \ .led_hw_control_set =3D dp83822_led_hw_control_set, \ .led_hw_control_get =3D dp83822_led_hw_control_get, \ + .attach_port =3D dp83822_attach_port \ } =20 #define DP83825_PHY_DRIVER(_id, _name) \ --=20 2.49.0 From nobody Mon Oct 6 20:59:30 2025 Received: from relay9-d.mail.gandi.net (relay9-d.mail.gandi.net [217.70.183.199]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 60BC626980B; Thu, 17 Jul 2025 07:30:36 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=217.70.183.199 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1752737438; cv=none; b=UZFrHuERzNCPADu2QO/Q81Nt6q2ZqYLuRFwD0lEfa7V7U/AcpvoWlWwp6dsrZ1KpJXsgQkQeYBUdJAuQzTpIWpKV3LaYpZiRiBt7rc34NX8tq1nZ8Kumcm9TFw8ulZyQU43YmFQ6id6S8j/QFncXEjAQ6hg8Nwr7HmJIcma8Tlk= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1752737438; c=relaxed/simple; bh=/7f+72FwcPqmiWMhTIUMM/7BCRZPxqyY+nrsmmTeric=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=c9c6Gdzl+f/B7Q4ccQ0nY4SEJyYCQw19S+fe5w8Yycj+q8Xz0yMwhEvbLUyWaeqY/4rYSsb457ylKy0gQ6abqf6iVnCICUQu8/roWPB9x7o3lQt8t27OL7wLjLLApUjtUuIaXaWlVvYQx9eAi+SGYnwAwvCz3oZ0cwYtyXe5ie0= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com; spf=pass smtp.mailfrom=bootlin.com; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b=OEB1Yirf; arc=none smtp.client-ip=217.70.183.199 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=bootlin.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b="OEB1Yirf" Received: by mail.gandi.net (Postfix) with ESMTPSA id 60FCB443F2; Thu, 17 Jul 2025 07:30:33 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1752737434; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=NAC7wD/Vlf6AUgp1FxRxSnXtbNcrcpzKlTD1i02AJLw=; b=OEB1YirfCa1ymxDAGxmrmDHkKIFsfzwbdbUh2fW7MROjhP5avXgRY9muritvmrXBfCqymP +fS+rSIk+cf2B0Ha8O1FJcRkiiac5NHu9B3ugSk8MNn4OtUIcmw6s/8/fPG2fvaqd/nNMb K99DTnpePLyeLDdEGmnMjGR294w9OemEtKNGf2zxrKU4kRmdqHKDoal1kxCKF9x+NZcz4s 64Q6eSar24Ps2EkXFiJ+tSQNqkGu2zJF9uIfEPRmowSI0RmUlwjyy1HbdtAT93/J5vCMaG Th4OZXYqOdNK93YB6Z5w8Wmop7NEuEDSzCEYMaDOq4gArmLxma5CcGdFSZGDhA== From: Maxime Chevallier To: davem@davemloft.net Cc: Maxime Chevallier , netdev@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, thomas.petazzoni@bootlin.com, Andrew Lunn , Jakub Kicinski , Eric Dumazet , Paolo Abeni , Russell King , linux-arm-kernel@lists.infradead.org, Christophe Leroy , Herve Codina , Florian Fainelli , Heiner Kallweit , Vladimir Oltean , =?UTF-8?q?K=C3=B6ry=20Maincent?= , =?UTF-8?q?Marek=20Beh=C3=BAn?= , Oleksij Rempel , =?UTF-8?q?Nicol=C3=B2=20Veronese?= , Simon Horman , mwojtas@chromium.org, Antoine Tenart , devicetree@vger.kernel.org, Conor Dooley , Krzysztof Kozlowski , Rob Herring , Romain Gantois , Daniel Golle , Dimitri Fedrau Subject: [PATCH net-next v9 06/15] net: phy: Create a phy_port for PHY-driven SFPs Date: Thu, 17 Jul 2025 09:30:10 +0200 Message-ID: <20250717073020.154010-7-maxime.chevallier@bootlin.com> X-Mailer: git-send-email 2.49.0 In-Reply-To: <20250717073020.154010-1-maxime.chevallier@bootlin.com> References: <20250717073020.154010-1-maxime.chevallier@bootlin.com> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable X-GND-State: clean X-GND-Score: -100 X-GND-Cause: gggruggvucftvghtrhhoucdtuddrgeeffedrtdefgdehleellecutefuodetggdotefrodftvfcurfhrohhfihhlvgemucfitefpfffkpdcuggftfghnshhusghstghrihgsvgenuceurghilhhouhhtmecufedtudenucesvcftvggtihhpihgvnhhtshculddquddttddmnecujfgurhephffvvefufffkofgjfhgggfestdekredtredttdenucfhrhhomhepofgrgihimhgvucevhhgvvhgrlhhlihgvrhcuoehmrgigihhmvgdrtghhvghvrghllhhivghrsegsohhothhlihhnrdgtohhmqeenucggtffrrghtthgvrhhnpeevgedtffelffelveeuleelgfejfeevvdejhfehgeefgfffvdefteegvedutefftdenucfkphepvdgrtddumegtsgduleemkegugeehmeegledttdemieehieekmedvlegsudemlegvfhehmegvkegtjeenucevlhhushhtvghrufhiiigvpedunecurfgrrhgrmhepihhnvghtpedvrgdtudemtggsudelmeekugegheemgeeltddtmeeiheeikeemvdelsgdumeelvghfheemvgektgejpdhhvghlohepfhgvughorhgrrdhhohhmvgdpmhgrihhlfhhrohhmpehmrgigihhmvgdrtghhvghvrghllhhivghrsegsohhothhlihhnrdgtohhmpdhnsggprhgtphhtthhopeefuddprhgtphhtthhopegurghvvghmsegurghvvghmlhhofhhtrdhnvghtpdhrtghpthhtohepmhgrgihimhgvrdgthhgvvhgrlhhlihgvrhessghoohhtlhhinhdrtghomhdprhgtphhtthhopehnvghtuggvvhesvhhgvghrrdhkv ghrnhgvlhdrohhrghdprhgtphhtthhopehlihhnuhigqdhkvghrnhgvlhesvhhgvghrrdhkvghrnhgvlhdrohhrghdprhgtphhtthhopehlihhnuhigqdgrrhhmqdhmshhmsehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtohepthhhohhmrghsrdhpvghtrgiiiihonhhisegsohhothhlihhnrdgtohhmpdhrtghpthhtoheprghnughrvgifsehluhhnnhdrtghhpdhrtghpthhtohepkhhusggrsehkvghrnhgvlhdrohhrgh X-GND-Sasl: maxime.chevallier@bootlin.com Content-Type: text/plain; charset="utf-8" Some PHY devices may be used as media-converters to drive SFP ports (for example, to allow using SFP when the SoC can only output RGMII). This is already supported to some extend by allowing PHY drivers to registers themselves as being SFP upstream. However, the logic to drive the SFP can actually be split to a per-port control logic, allowing support for multi-port PHYs, or PHYs that can either drive SFPs or Copper. To that extent, create a phy_port when registering an SFP bus onto a PHY. This port is considered a "serdes" port, in that it can feed data to anther entity on the link. The PHY driver needs to specify the various PHY_INTERFACE_MODE_XXX that this port supports. Signed-off-by: Maxime Chevallier Reviewed-by: Christophe Leroy --- drivers/net/phy/phy_device.c | 24 ++++++++++++++++++++++++ drivers/net/phy/phy_port.c | 15 +++++++++++++++ 2 files changed, 39 insertions(+) diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 6c6645889352..137d48451959 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -1627,6 +1627,26 @@ static void phy_del_port(struct phy_device *phydev, = struct phy_port *port) phydev->n_ports--; } =20 +static int phy_setup_sfp_port(struct phy_device *phydev) +{ + struct phy_port *port =3D phy_port_alloc(); + + if (!port) + return -ENOMEM; + + port->parent_type =3D PHY_PORT_PHY; + port->phy =3D phydev; + + /* The PHY is a media converter, the port connected to the SFP cage + * is a MII port. + */ + port->is_mii =3D true; + + phy_add_port(phydev, port); + + return 0; +} + /** * phy_sfp_probe - probe for a SFP cage attached to this PHY device * @phydev: Pointer to phy_device @@ -1648,6 +1668,10 @@ int phy_sfp_probe(struct phy_device *phydev, ret =3D sfp_bus_add_upstream(bus, phydev, ops); sfp_bus_put(bus); } + + if (phydev->sfp_bus) + ret =3D phy_setup_sfp_port(phydev); + return ret; } EXPORT_SYMBOL(phy_sfp_probe); diff --git a/drivers/net/phy/phy_port.c b/drivers/net/phy/phy_port.c index 51870f2378ec..36de8c5c9ad5 100644 --- a/drivers/net/phy/phy_port.c +++ b/drivers/net/phy/phy_port.c @@ -113,6 +113,21 @@ void phy_port_update_supported(struct phy_port *port) phy_caps_medium_get_supported(supported, i, port->lanes); linkmode_or(port->supported, port->supported, supported); } + + /* Serdes ports supported may through SFP may not have any medium set, + * as they will output PHY_INTERFACE_MODE_XXX modes. In that case, derive + * the supported list based on these interfaces + */ + if (port->is_mii && linkmode_empty(supported)) { + unsigned long interface, link_caps =3D 0; + + /* Get each interface's caps */ + for_each_set_bit(interface, port->interfaces, + PHY_INTERFACE_MODE_MAX) + link_caps |=3D phy_caps_from_interface(interface); + + phy_caps_linkmodes(link_caps, port->supported); + } } EXPORT_SYMBOL_GPL(phy_port_update_supported); =20 --=20 2.49.0 From nobody Mon Oct 6 20:59:30 2025 Received: from relay9-d.mail.gandi.net (relay9-d.mail.gandi.net [217.70.183.199]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id E11B6270579; Thu, 17 Jul 2025 07:30:37 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=217.70.183.199 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1752737440; cv=none; b=Y58rwcfacNRjQnLhG9OuzzYr9+yTPVw+NTYgESelK259jo2e0bhd8wWgKrx5rtBDz3f47E3oYWR5Q/P5yMebGZl4NlzO345AS+h/65j7jsGlw7EfDfDVbmhSWvIv/rT1oWgSwGNCR2EEdXJ3BOx35GRNEkENC0fP8HQhYqHr+MY= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1752737440; c=relaxed/simple; bh=XbBD+VpScBPF9VOjsxue1nB7qaweyDcTsFdl8czaG6M=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=J/Nx0uGYAuleciGiL6XxqQtAFHO9lz6hqcqoUci3/yiMfEGwtYBLK2HzeNfZw6EraMNVgrp7CleDY2BmwAg8fINR+FfVY+WKNrJIJt9Ar5W8LlvC7oFWakxS3VfFH5hA1KBnxUYmOFgsYooMwh87xfnJT45FMzujpG8T7ZmnZoU= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com; spf=pass smtp.mailfrom=bootlin.com; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b=bCeIHbA5; arc=none smtp.client-ip=217.70.183.199 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=bootlin.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b="bCeIHbA5" Received: by mail.gandi.net (Postfix) with ESMTPSA id D86DA443FA; Thu, 17 Jul 2025 07:30:34 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1752737436; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=uMi7q1Xj0SV+4KN6Do+Hd7HG35N6wagBuwDX8ntAg/A=; b=bCeIHbA59pl3aA7TFQUwlT2gil0FcT+qCrgQZ5JELHo3aWk/LfQ4aojeOgxoUeCqtcgHvt Thb6lJ6NNGFmVN0hXplgXjGtBsPmb6W4ePVClEAx3pMrBvbpvuAf9WJfUegSq8IoRdSJbV 056XkmY8kzqoclLsSC9d816Gl5CXjzgdyiq+okyLvt32ZQrmKGooUjFPFyOGBkdRWKPe19 zKUkKDgJXyvmbFknAJmUgwO8/BVAjsyFiwFbxsBntdI4rvz2JNUJ1vih5Z+lCC/M5d7win H616hQWMg2noNY/F+O6f6RLxufJbo+Cyf5h1SjAoGRgIaLauXmHkbHHOCw3eYw== From: Maxime Chevallier To: davem@davemloft.net Cc: Maxime Chevallier , netdev@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, thomas.petazzoni@bootlin.com, Andrew Lunn , Jakub Kicinski , Eric Dumazet , Paolo Abeni , Russell King , linux-arm-kernel@lists.infradead.org, Christophe Leroy , Herve Codina , Florian Fainelli , Heiner Kallweit , Vladimir Oltean , =?UTF-8?q?K=C3=B6ry=20Maincent?= , =?UTF-8?q?Marek=20Beh=C3=BAn?= , Oleksij Rempel , =?UTF-8?q?Nicol=C3=B2=20Veronese?= , Simon Horman , mwojtas@chromium.org, Antoine Tenart , devicetree@vger.kernel.org, Conor Dooley , Krzysztof Kozlowski , Rob Herring , Romain Gantois , Daniel Golle , Dimitri Fedrau Subject: [PATCH net-next v9 07/15] net: phy: Introduce generic SFP handling for PHY drivers Date: Thu, 17 Jul 2025 09:30:11 +0200 Message-ID: <20250717073020.154010-8-maxime.chevallier@bootlin.com> X-Mailer: git-send-email 2.49.0 In-Reply-To: <20250717073020.154010-1-maxime.chevallier@bootlin.com> References: <20250717073020.154010-1-maxime.chevallier@bootlin.com> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable X-GND-State: clean X-GND-Score: -100 X-GND-Cause: gggruggvucftvghtrhhoucdtuddrgeeffedrtdefgdehleellecutefuodetggdotefrodftvfcurfhrohhfihhlvgemucfitefpfffkpdcuggftfghnshhusghstghrihgsvgenuceurghilhhouhhtmecufedtudenucesvcftvggtihhpihgvnhhtshculddquddttddmnecujfgurhephffvvefufffkofgjfhgggfestdekredtredttdenucfhrhhomhepofgrgihimhgvucevhhgvvhgrlhhlihgvrhcuoehmrgigihhmvgdrtghhvghvrghllhhivghrsegsohhothhlihhnrdgtohhmqeenucggtffrrghtthgvrhhnpeevgedtffelffelveeuleelgfejfeevvdejhfehgeefgfffvdefteegvedutefftdenucfkphepvdgrtddumegtsgduleemkegugeehmeegledttdemieehieekmedvlegsudemlegvfhehmegvkegtjeenucevlhhushhtvghrufhiiigvpeehnecurfgrrhgrmhepihhnvghtpedvrgdtudemtggsudelmeekugegheemgeeltddtmeeiheeikeemvdelsgdumeelvghfheemvgektgejpdhhvghlohepfhgvughorhgrrdhhohhmvgdpmhgrihhlfhhrohhmpehmrgigihhmvgdrtghhvghvrghllhhivghrsegsohhothhlihhnrdgtohhmpdhnsggprhgtphhtthhopeefuddprhgtphhtthhopegurghvvghmsegurghvvghmlhhofhhtrdhnvghtpdhrtghpthhtohepmhgrgihimhgvrdgthhgvvhgrlhhlihgvrhessghoohhtlhhinhdrtghomhdprhgtphhtthhopehnvghtuggvvhesvhhgvghrrdhkv ghrnhgvlhdrohhrghdprhgtphhtthhopehlihhnuhigqdhkvghrnhgvlhesvhhgvghrrdhkvghrnhgvlhdrohhrghdprhgtphhtthhopehlihhnuhigqdgrrhhmqdhmshhmsehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtohepthhhohhmrghsrdhpvghtrgiiiihonhhisegsohhothhlihhnrdgtohhmpdhrtghpthhtoheprghnughrvgifsehluhhnnhdrtghhpdhrtghpthhtohepkhhusggrsehkvghrnhgvlhdrohhrgh X-GND-Sasl: maxime.chevallier@bootlin.com Content-Type: text/plain; charset="utf-8" There are currently 4 PHY drivers that can drive downstream SFPs: marvell.c, marvell10g.c, at803x.c and marvell-88x2222.c. Most of the logic is boilerplate, either calling into generic phylib helpers (for SFP PHY attach, bus attach, etc.) or performing the same tasks with a bit of validation : - Getting the module's expected interface mode - Making sure the PHY supports it - Optionnaly perform some configuration to make sure the PHY outputs the right mode This can be made more generic by leveraging the phy_port, and its configure_mii() callback which allows setting a port's interfaces when the port is a serdes. Introduce a generic PHY SFP support. If a driver doesn't probe the SFP bus itself, but an SFP phandle is found in devicetree/firmware, then the generic PHY SFP support will be used, relying on port ops. PHY driver need to : - Register a .attach_port() callback - When a serdes port is registered to the PHY, drivers must set port->interfaces to the set of PHY_INTERFACE_MODE the port can output - If the port has limitations regarding speed, duplex and aneg, the port can also fine-tune the final linkmodes that can be supported - The port may register a set of ops, including .configure_mii(), that will be called at module_insert time to adjust the interface based on the module detected. Signed-off-by: Maxime Chevallier Reviewed-by: Christophe Leroy --- drivers/net/phy/phy_device.c | 107 +++++++++++++++++++++++++++++++++++ include/linux/phy.h | 2 + 2 files changed, 109 insertions(+) diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 137d48451959..195559df81ad 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -1587,6 +1587,87 @@ void phy_sfp_detach(void *upstream, struct sfp_bus *= bus) } EXPORT_SYMBOL(phy_sfp_detach); =20 +static int phy_sfp_module_insert(void *upstream, const struct sfp_eeprom_i= d *id) +{ + struct phy_device *phydev =3D upstream; + struct phy_port *port =3D phy_get_sfp_port(phydev); + + __ETHTOOL_DECLARE_LINK_MODE_MASK(sfp_support); + DECLARE_PHY_INTERFACE_MASK(interfaces); + phy_interface_t iface; + + linkmode_zero(sfp_support); + + if (!port) + return -EINVAL; + + sfp_parse_support(phydev->sfp_bus, id, sfp_support, interfaces); + + if (phydev->n_ports =3D=3D 1) + phydev->port =3D sfp_parse_port(phydev->sfp_bus, id, sfp_support); + + linkmode_and(sfp_support, port->supported, sfp_support); + + if (linkmode_empty(sfp_support)) { + dev_err(&phydev->mdio.dev, "incompatible SFP module inserted\n"); + return -EINVAL; + } + + iface =3D sfp_select_interface(phydev->sfp_bus, sfp_support); + + /* Check that this interface is supported */ + if (!test_bit(iface, port->interfaces)) { + dev_err(&phydev->mdio.dev, "incompatible SFP module inserted\n"); + return -EINVAL; + } + + if (port->ops && port->ops->configure_mii) + return port->ops->configure_mii(port, true, iface); + + return 0; +} + +static void phy_sfp_module_remove(void *upstream) +{ + struct phy_device *phydev =3D upstream; + struct phy_port *port =3D phy_get_sfp_port(phydev); + + if (port && port->ops && port->ops->configure_mii) + port->ops->configure_mii(port, false, PHY_INTERFACE_MODE_NA); + + if (phydev->n_ports =3D=3D 1) + phydev->port =3D PORT_NONE; +} + +static void phy_sfp_link_up(void *upstream) +{ + struct phy_device *phydev =3D upstream; + struct phy_port *port =3D phy_get_sfp_port(phydev); + + if (port && port->ops && port->ops->link_up) + port->ops->link_up(port); +} + +static void phy_sfp_link_down(void *upstream) +{ + struct phy_device *phydev =3D upstream; + struct phy_port *port =3D phy_get_sfp_port(phydev); + + if (port && port->ops && port->ops->link_down) + port->ops->link_down(port); +} + +static const struct sfp_upstream_ops sfp_phydev_ops =3D { + .attach =3D phy_sfp_attach, + .detach =3D phy_sfp_detach, + .module_insert =3D phy_sfp_module_insert, + .module_remove =3D phy_sfp_module_remove, + .link_up =3D phy_sfp_link_up, + .link_down =3D phy_sfp_link_down, + .connect_phy =3D phy_sfp_connect_phy, + .disconnect_phy =3D phy_sfp_disconnect_phy, +}; + static int phy_add_port(struct phy_device *phydev, struct phy_port *port) { int ret =3D 0; @@ -3474,6 +3555,13 @@ static int phy_setup_ports(struct phy_device *phydev) if (ret) return ret; =20 + /* Use generic SFP probing only if the driver didn't do so already */ + if (!phydev->sfp_bus) { + ret =3D phy_sfp_probe(phydev, &sfp_phydev_ops); + if (ret) + goto out; + } + if (phydev->n_ports < phydev->max_n_ports) { ret =3D phy_default_setup_single_port(phydev); if (ret) @@ -3509,6 +3597,25 @@ static int phy_setup_ports(struct phy_device *phydev) return ret; } =20 +/** + * phy_get_sfp_port() - Returns the first valid SFP port of a PHY + * @phydev: pointer to the PHY device to get the SFP port from + * + * Returns: The first active SFP (serdes) port of a PHY device, NULL if no= ne + * exist. + */ +struct phy_port *phy_get_sfp_port(struct phy_device *phydev) +{ + struct phy_port *port; + + list_for_each_entry(port, &phydev->ports, head) + if (port->active && port->is_mii) + return port; + + return NULL; +} +EXPORT_SYMBOL_GPL(phy_get_sfp_port); + /** * fwnode_mdio_find_device - Given a fwnode, find the mdio_device * @fwnode: pointer to the mdio_device's fwnode diff --git a/include/linux/phy.h b/include/linux/phy.h index cb95f9008007..329603c802d1 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -2121,6 +2121,8 @@ int __phy_hwtstamp_set(struct phy_device *phydev, struct kernel_hwtstamp_config *config, struct netlink_ext_ack *extack); =20 +struct phy_port *phy_get_sfp_port(struct phy_device *phydev); + extern const struct bus_type mdio_bus_type; extern const struct class mdio_bus_class; =20 --=20 2.49.0 From nobody Mon Oct 6 20:59:30 2025 Received: from relay9-d.mail.gandi.net (relay9-d.mail.gandi.net [217.70.183.199]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 69999253359; Thu, 17 Jul 2025 07:30:39 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=217.70.183.199 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1752737441; cv=none; b=eEceHziB4oHVnMmquJwdjWHcTV8mRH/mK3wAe8bOnlw+8Gd7fxaX1ZxmrOAbj4jgPy7O39GC5VC+Sa0R3NC45SyB6KjudegVbYtAG8/VqANLDrOPIlnWm4T6x7eBECWUkLkAghIOuRNZ22lvRr+TtVi+cqIIwQ3IOPhVahVVBs4= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1752737441; c=relaxed/simple; bh=/IW6uTP4Rv9SVqHDXNEom+uXmtlSlI9CIfbM8GUTWaA=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=SmMPzjp13yOeB5zz2lEKbIoH8zpY4YxiCICNs2d9bC3+4lhB5+UZj+2Y+zf3RWqftyHYt2tj5pq96gk43D/cz8++8wuqAsXLz85jtArFgisq9bzayO11+TT4jcYKGkFlR524joGDVMesiyh3kpEzEVWNUiPpCP1E4ps5VSZGxck= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com; spf=pass smtp.mailfrom=bootlin.com; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b=HtzLbcUl; arc=none smtp.client-ip=217.70.183.199 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=bootlin.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b="HtzLbcUl" Received: by mail.gandi.net (Postfix) with ESMTPSA id 6354843A05; Thu, 17 Jul 2025 07:30:36 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1752737437; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=G4VV8aMtG295n3+av3TCcCDuWj5u3sbujgpkFY3ertU=; b=HtzLbcUlA9lFQzdcT21b3JdhfPa5x8KMMCKXRyf29wR09i/ocQxLS9qzgTFepqmcdeZ66u Rarv+XSkFunUicotyUTNIbrae62JWmAkv01kTlf3IgND6f1BCe6Auzvm1U0KCLQo4IiDgq eH+L1aVtKRQRANXykgC70lkAWmc5bpBEl/f2qXQz/DgFuAgH90lr61IcbTTJH0lt2WMLAl c38edfowt0WuF7eULN6jL54x/qVRwkyYqem+XgRbxgN9ABj/aRkPe833xujJRIlbO1Gs0m HQ/HOcmItycFZJRnOjcfAD8pZd9yA7htT3BZNlVutcPGXHQZ2XHK/LZpD3u3HA== From: Maxime Chevallier To: davem@davemloft.net Cc: Maxime Chevallier , netdev@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, thomas.petazzoni@bootlin.com, Andrew Lunn , Jakub Kicinski , Eric Dumazet , Paolo Abeni , Russell King , linux-arm-kernel@lists.infradead.org, Christophe Leroy , Herve Codina , Florian Fainelli , Heiner Kallweit , Vladimir Oltean , =?UTF-8?q?K=C3=B6ry=20Maincent?= , =?UTF-8?q?Marek=20Beh=C3=BAn?= , Oleksij Rempel , =?UTF-8?q?Nicol=C3=B2=20Veronese?= , Simon Horman , mwojtas@chromium.org, Antoine Tenart , devicetree@vger.kernel.org, Conor Dooley , Krzysztof Kozlowski , Rob Herring , Romain Gantois , Daniel Golle , Dimitri Fedrau Subject: [PATCH net-next v9 08/15] net: phy: marvell-88x2222: Support SFP through phy_port interface Date: Thu, 17 Jul 2025 09:30:12 +0200 Message-ID: <20250717073020.154010-9-maxime.chevallier@bootlin.com> X-Mailer: git-send-email 2.49.0 In-Reply-To: <20250717073020.154010-1-maxime.chevallier@bootlin.com> References: <20250717073020.154010-1-maxime.chevallier@bootlin.com> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable X-GND-State: clean X-GND-Score: -100 X-GND-Cause: gggruggvucftvghtrhhoucdtuddrgeeffedrtdefgdehleellecutefuodetggdotefrodftvfcurfhrohhfihhlvgemucfitefpfffkpdcuggftfghnshhusghstghrihgsvgenuceurghilhhouhhtmecufedtudenucesvcftvggtihhpihgvnhhtshculddquddttddmnecujfgurhephffvvefufffkofgjfhgggfestdekredtredttdenucfhrhhomhepofgrgihimhgvucevhhgvvhgrlhhlihgvrhcuoehmrgigihhmvgdrtghhvghvrghllhhivghrsegsohhothhlihhnrdgtohhmqeenucggtffrrghtthgvrhhnpeevgedtffelffelveeuleelgfejfeevvdejhfehgeefgfffvdefteegvedutefftdenucfkphepvdgrtddumegtsgduleemkegugeehmeegledttdemieehieekmedvlegsudemlegvfhehmegvkegtjeenucevlhhushhtvghrufhiiigvpeehnecurfgrrhgrmhepihhnvghtpedvrgdtudemtggsudelmeekugegheemgeeltddtmeeiheeikeemvdelsgdumeelvghfheemvgektgejpdhhvghlohepfhgvughorhgrrdhhohhmvgdpmhgrihhlfhhrohhmpehmrgigihhmvgdrtghhvghvrghllhhivghrsegsohhothhlihhnrdgtohhmpdhnsggprhgtphhtthhopeefuddprhgtphhtthhopegurghvvghmsegurghvvghmlhhofhhtrdhnvghtpdhrtghpthhtohepmhgrgihimhgvrdgthhgvvhgrlhhlihgvrhessghoohhtlhhinhdrtghomhdprhgtphhtthhopehnvghtuggvvhesvhhgvghrrdhkv ghrnhgvlhdrohhrghdprhgtphhtthhopehlihhnuhigqdhkvghrnhgvlhesvhhgvghrrdhkvghrnhgvlhdrohhrghdprhgtphhtthhopehlihhnuhigqdgrrhhmqdhmshhmsehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtohepthhhohhmrghsrdhpvghtrgiiiihonhhisegsohhothhlihhnrdgtohhmpdhrtghpthhtoheprghnughrvgifsehluhhnnhdrtghhpdhrtghpthhtohepkhhusggrsehkvghrnhgvlhdrohhrgh X-GND-Sasl: maxime.chevallier@bootlin.com Content-Type: text/plain; charset="utf-8" The 88x2222 PHY from Marvell only supports serialised modes as its line-facing interfaces. Convert that driver to the generic phylib SFP handling. Signed-off-by: Maxime Chevallier Reviewed-by: Christophe Leroy --- drivers/net/phy/marvell-88x2222.c | 98 +++++++++++++------------------ 1 file changed, 41 insertions(+), 57 deletions(-) diff --git a/drivers/net/phy/marvell-88x2222.c b/drivers/net/phy/marvell-88= x2222.c index fad2f54c1eac..7a7fbdc221af 100644 --- a/drivers/net/phy/marvell-88x2222.c +++ b/drivers/net/phy/marvell-88x2222.c @@ -13,7 +13,7 @@ #include #include #include -#include +#include #include =20 /* Port PCS Configuration */ @@ -473,90 +473,73 @@ static int mv2222_config_init(struct phy_device *phyd= ev) return 0; } =20 -static int mv2222_sfp_insert(void *upstream, const struct sfp_eeprom_id *i= d) +static int mv2222_configure_serdes(struct phy_port *port, bool enable, + phy_interface_t interface) { - DECLARE_PHY_INTERFACE_MASK(interfaces); - struct phy_device *phydev =3D upstream; - phy_interface_t sfp_interface; + struct phy_device *phydev =3D port_phydev(port); struct mv2222_data *priv; - struct device *dev; - int ret; - - __ETHTOOL_DECLARE_LINK_MODE_MASK(sfp_supported) =3D { 0, }; + int ret =3D 0; =20 priv =3D phydev->priv; - dev =3D &phydev->mdio.dev; - - sfp_parse_support(phydev->sfp_bus, id, sfp_supported, interfaces); - phydev->port =3D sfp_parse_port(phydev->sfp_bus, id, sfp_supported); - sfp_interface =3D sfp_select_interface(phydev->sfp_bus, sfp_supported); - - dev_info(dev, "%s SFP module inserted\n", phy_modes(sfp_interface)); + priv->line_interface =3D interface; =20 - if (sfp_interface !=3D PHY_INTERFACE_MODE_10GBASER && - sfp_interface !=3D PHY_INTERFACE_MODE_1000BASEX && - sfp_interface !=3D PHY_INTERFACE_MODE_SGMII) { - dev_err(dev, "Incompatible SFP module inserted\n"); + if (enable) { + linkmode_and(priv->supported, phydev->supported, port->supported); =20 - return -EINVAL; - } - - priv->line_interface =3D sfp_interface; - linkmode_and(priv->supported, phydev->supported, sfp_supported); + ret =3D mv2222_config_line(phydev); + if (ret < 0) + return ret; =20 - ret =3D mv2222_config_line(phydev); - if (ret < 0) - return ret; + if (mutex_trylock(&phydev->lock)) { + ret =3D mv2222_config_aneg(phydev); + mutex_unlock(&phydev->lock); + } =20 - if (mutex_trylock(&phydev->lock)) { - ret =3D mv2222_config_aneg(phydev); - mutex_unlock(&phydev->lock); + } else { + linkmode_zero(priv->supported); } =20 return ret; } =20 -static void mv2222_sfp_remove(void *upstream) +static void mv2222_port_link_up(struct phy_port *port) { - struct phy_device *phydev =3D upstream; - struct mv2222_data *priv; - - priv =3D phydev->priv; - - priv->line_interface =3D PHY_INTERFACE_MODE_NA; - linkmode_zero(priv->supported); - phydev->port =3D PORT_NONE; -} - -static void mv2222_sfp_link_up(void *upstream) -{ - struct phy_device *phydev =3D upstream; + struct phy_device *phydev =3D port_phydev(port); struct mv2222_data *priv; =20 priv =3D phydev->priv; priv->sfp_link =3D true; } =20 -static void mv2222_sfp_link_down(void *upstream) +static void mv2222_port_link_down(struct phy_port *port) { - struct phy_device *phydev =3D upstream; + struct phy_device *phydev =3D port_phydev(port); struct mv2222_data *priv; =20 priv =3D phydev->priv; priv->sfp_link =3D false; } =20 -static const struct sfp_upstream_ops sfp_phy_ops =3D { - .module_insert =3D mv2222_sfp_insert, - .module_remove =3D mv2222_sfp_remove, - .link_up =3D mv2222_sfp_link_up, - .link_down =3D mv2222_sfp_link_down, - .attach =3D phy_sfp_attach, - .detach =3D phy_sfp_detach, - .connect_phy =3D phy_sfp_connect_phy, - .disconnect_phy =3D phy_sfp_disconnect_phy, +static const struct phy_port_ops mv2222_port_ops =3D { + .link_up =3D mv2222_port_link_up, + .link_down =3D mv2222_port_link_down, + .configure_mii =3D mv2222_configure_serdes, }; =20 +static int mv2222_attach_port(struct phy_device *phydev, struct phy_port *= port) +{ + if (!port->is_mii) + return 0; + + port->ops =3D &mv2222_port_ops; + + __set_bit(PHY_INTERFACE_MODE_10GBASER, port->interfaces); + __set_bit(PHY_INTERFACE_MODE_1000BASEX, port->interfaces); + __set_bit(PHY_INTERFACE_MODE_SGMII, port->interfaces); + + return 0; +} + static int mv2222_probe(struct phy_device *phydev) { struct device *dev =3D &phydev->mdio.dev; @@ -592,7 +575,7 @@ static int mv2222_probe(struct phy_device *phydev) priv->line_interface =3D PHY_INTERFACE_MODE_NA; phydev->priv =3D priv; =20 - return phy_sfp_probe(phydev, &sfp_phy_ops); + return 0; } =20 static struct phy_driver mv2222_drivers[] =3D { @@ -609,6 +592,7 @@ static struct phy_driver mv2222_drivers[] =3D { .suspend =3D mv2222_suspend, .resume =3D mv2222_resume, .read_status =3D mv2222_read_status, + .attach_port =3D mv2222_attach_port, }, }; module_phy_driver(mv2222_drivers); --=20 2.49.0 From nobody Mon Oct 6 20:59:30 2025 Received: from relay9-d.mail.gandi.net (relay9-d.mail.gandi.net [217.70.183.199]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id E47DE28504A; Thu, 17 Jul 2025 07:30:40 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=217.70.183.199 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1752737443; cv=none; b=h/32D4wWwT5HNQq+1vIOl/a2tF6Z3yx7zLN1+T0TKUo3dZXT9+Wo2BRDI/iRyWUb1jPcgRQ830l9Hg3b3SK4hkkpExwy/rNo1nt89bfII9F/oaXojIM+vjchHo4X90C/xzn/AVZJNHoNUXY+DSNuQs+5CYcu8TL4ZAorfN6vMCg= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1752737443; c=relaxed/simple; bh=HiyUtlu/WHUcoaDEtlfuBXdO6WAX5zQbiXNL1/oj89U=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=srLhowtPjPQ2uDnq1FZv1aIPpovhsIh7rfOxKv7kTSqUEKdH6ugf25Ux35VqjeXwPVrWtJ6SXp17NSyckYK7rKweGLLCJZj+GuguZWpg3pBjU25idT8jE02YLJYQ/yNbSFiNyVd6ymOMVGu8yO6T2UM6Os+Az0XOBWkzJ+hLdVI= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com; spf=pass smtp.mailfrom=bootlin.com; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b=Re8wEroA; arc=none smtp.client-ip=217.70.183.199 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=bootlin.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b="Re8wEroA" Received: by mail.gandi.net (Postfix) with ESMTPSA id DAC7D443EB; Thu, 17 Jul 2025 07:30:37 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1752737439; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=w8rmrUxAjLWR1LXoQ/1rHxTuiIJstrc7uNNYiiWudbc=; b=Re8wEroA6zLB70t35D3toDGpCo14p6a2T6eYezX4vDQ22t4Ql3XCh+8L0/rjormhrNpAPu 4B41PrOD0NTZwJDGeubAPH2Qpv19xC/F9T0hJ4bFoYL3ZCL9z5yCkSYxlVpzsDzIHiahDf HNoSk75JqKweLqkwN4iWesXOkSbluMFf1d05rhA9y/rMCTxJhagUPv+GKPafaxF16P6aaT zTzFGgTGeFAmkMScm9EiUkvTpSW6wfgC1RuBBpwhABieNfnyFPBkfOOsIKqEsa0v67XpNx 5qTol2vKyr54rG9IiQ3jxE8yw/LAaQL5C51CRE35qg7Db8ZaxC/7ZmNML7YSAQ== From: Maxime Chevallier To: davem@davemloft.net Cc: Maxime Chevallier , netdev@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, thomas.petazzoni@bootlin.com, Andrew Lunn , Jakub Kicinski , Eric Dumazet , Paolo Abeni , Russell King , linux-arm-kernel@lists.infradead.org, Christophe Leroy , Herve Codina , Florian Fainelli , Heiner Kallweit , Vladimir Oltean , =?UTF-8?q?K=C3=B6ry=20Maincent?= , =?UTF-8?q?Marek=20Beh=C3=BAn?= , Oleksij Rempel , =?UTF-8?q?Nicol=C3=B2=20Veronese?= , Simon Horman , mwojtas@chromium.org, Antoine Tenart , devicetree@vger.kernel.org, Conor Dooley , Krzysztof Kozlowski , Rob Herring , Romain Gantois , Daniel Golle , Dimitri Fedrau Subject: [PATCH net-next v9 09/15] net: phy: marvell: Support SFP through phy_port interface Date: Thu, 17 Jul 2025 09:30:13 +0200 Message-ID: <20250717073020.154010-10-maxime.chevallier@bootlin.com> X-Mailer: git-send-email 2.49.0 In-Reply-To: <20250717073020.154010-1-maxime.chevallier@bootlin.com> References: <20250717073020.154010-1-maxime.chevallier@bootlin.com> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable X-GND-State: clean X-GND-Score: -100 X-GND-Cause: gggruggvucftvghtrhhoucdtuddrgeeffedrtdefgdehleellecutefuodetggdotefrodftvfcurfhrohhfihhlvgemucfitefpfffkpdcuggftfghnshhusghstghrihgsvgenuceurghilhhouhhtmecufedtudenucesvcftvggtihhpihgvnhhtshculddquddttddmnecujfgurhephffvvefufffkofgjfhgggfestdekredtredttdenucfhrhhomhepofgrgihimhgvucevhhgvvhgrlhhlihgvrhcuoehmrgigihhmvgdrtghhvghvrghllhhivghrsegsohhothhlihhnrdgtohhmqeenucggtffrrghtthgvrhhnpeevgedtffelffelveeuleelgfejfeevvdejhfehgeefgfffvdefteegvedutefftdenucfkphepvdgrtddumegtsgduleemkegugeehmeegledttdemieehieekmedvlegsudemlegvfhehmegvkegtjeenucevlhhushhtvghrufhiiigvpeehnecurfgrrhgrmhepihhnvghtpedvrgdtudemtggsudelmeekugegheemgeeltddtmeeiheeikeemvdelsgdumeelvghfheemvgektgejpdhhvghlohepfhgvughorhgrrdhhohhmvgdpmhgrihhlfhhrohhmpehmrgigihhmvgdrtghhvghvrghllhhivghrsegsohhothhlihhnrdgtohhmpdhnsggprhgtphhtthhopeefuddprhgtphhtthhopegurghvvghmsegurghvvghmlhhofhhtrdhnvghtpdhrtghpthhtohepmhgrgihimhgvrdgthhgvvhgrlhhlihgvrhessghoohhtlhhinhdrtghomhdprhgtphhtthhopehnvghtuggvvhesvhhgvghrrdhkv ghrnhgvlhdrohhrghdprhgtphhtthhopehlihhnuhigqdhkvghrnhgvlhesvhhgvghrrdhkvghrnhgvlhdrohhrghdprhgtphhtthhopehlihhnuhigqdgrrhhmqdhmshhmsehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtohepthhhohhmrghsrdhpvghtrgiiiihonhhisegsohhothhlihhnrdgtohhmpdhrtghpthhtoheprghnughrvgifsehluhhnnhdrtghhpdhrtghpthhtohepkhhusggrsehkvghrnhgvlhdrohhrgh X-GND-Sasl: maxime.chevallier@bootlin.com Content-Type: text/plain; charset="utf-8" Convert the Marvell driver (especially the 88e1512 driver) to use the phy_port interface to handle SFPs. This means registering a .attach_port() handler to detect when a serdes line interface is used (most likely, and SFP module). Signed-off-by: Maxime Chevallier Reviewed-by: Christophe Leroy --- drivers/net/phy/marvell.c | 100 +++++++++++++++----------------------- 1 file changed, 39 insertions(+), 61 deletions(-) diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index 623292948fa7..4f5fe5189fb1 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -29,10 +29,10 @@ #include #include #include +#include #include #include #include -#include =20 #include #include @@ -3561,42 +3561,38 @@ static int marvell_probe(struct phy_device *phydev) return marvell_hwmon_probe(phydev); } =20 -static int m88e1510_sfp_insert(void *upstream, const struct sfp_eeprom_id = *id) +static int mv88e1510_port_configure_serdes(struct phy_port *port, bool ena= ble, + phy_interface_t interface) { - DECLARE_PHY_INTERFACE_MASK(interfaces); - struct phy_device *phydev =3D upstream; - phy_interface_t interface; + struct phy_device *phydev =3D port_phydev(port); struct device *dev; int oldpage; int ret =3D 0; u16 mode; =20 - __ETHTOOL_DECLARE_LINK_MODE_MASK(supported) =3D { 0, }; - dev =3D &phydev->mdio.dev; =20 - sfp_parse_support(phydev->sfp_bus, id, supported, interfaces); - interface =3D sfp_select_interface(phydev->sfp_bus, supported); - - dev_info(dev, "%s SFP module inserted\n", phy_modes(interface)); + if (enable) { + switch (interface) { + case PHY_INTERFACE_MODE_1000BASEX: + mode =3D MII_88E1510_GEN_CTRL_REG_1_MODE_RGMII_1000X; =20 - switch (interface) { - case PHY_INTERFACE_MODE_1000BASEX: - mode =3D MII_88E1510_GEN_CTRL_REG_1_MODE_RGMII_1000X; + break; + case PHY_INTERFACE_MODE_100BASEX: + mode =3D MII_88E1510_GEN_CTRL_REG_1_MODE_RGMII_100FX; =20 - break; - case PHY_INTERFACE_MODE_100BASEX: - mode =3D MII_88E1510_GEN_CTRL_REG_1_MODE_RGMII_100FX; - - break; - case PHY_INTERFACE_MODE_SGMII: - mode =3D MII_88E1510_GEN_CTRL_REG_1_MODE_RGMII_SGMII; + break; + case PHY_INTERFACE_MODE_SGMII: + mode =3D MII_88E1510_GEN_CTRL_REG_1_MODE_RGMII_SGMII; =20 - break; - default: - dev_err(dev, "Incompatible SFP module inserted\n"); + break; + default: + dev_err(dev, "Incompatible SFP module inserted\n"); =20 - return -EINVAL; + return -EINVAL; + } + } else { + mode =3D MII_88E1510_GEN_CTRL_REG_1_MODE_RGMII; } =20 oldpage =3D phy_select_page(phydev, MII_MARVELL_MODE_PAGE); @@ -3613,49 +3609,30 @@ static int m88e1510_sfp_insert(void *upstream, cons= t struct sfp_eeprom_id *id) =20 error: return phy_restore_page(phydev, oldpage, ret); -} - -static void m88e1510_sfp_remove(void *upstream) -{ - struct phy_device *phydev =3D upstream; - int oldpage; - int ret =3D 0; - - oldpage =3D phy_select_page(phydev, MII_MARVELL_MODE_PAGE); - if (oldpage < 0) - goto error; =20 - ret =3D __phy_modify(phydev, MII_88E1510_GEN_CTRL_REG_1, - MII_88E1510_GEN_CTRL_REG_1_MODE_MASK, - MII_88E1510_GEN_CTRL_REG_1_MODE_RGMII); - if (ret < 0) - goto error; - - ret =3D __phy_set_bits(phydev, MII_88E1510_GEN_CTRL_REG_1, - MII_88E1510_GEN_CTRL_REG_1_RESET); - -error: - phy_restore_page(phydev, oldpage, ret); + return 0; } =20 -static const struct sfp_upstream_ops m88e1510_sfp_ops =3D { - .module_insert =3D m88e1510_sfp_insert, - .module_remove =3D m88e1510_sfp_remove, - .attach =3D phy_sfp_attach, - .detach =3D phy_sfp_detach, - .connect_phy =3D phy_sfp_connect_phy, - .disconnect_phy =3D phy_sfp_disconnect_phy, +static const struct phy_port_ops mv88e1510_serdes_port_ops =3D { + .configure_mii =3D mv88e1510_port_configure_serdes, }; =20 -static int m88e1510_probe(struct phy_device *phydev) +static int m88e1510_attach_port(struct phy_device *phy_device, + struct phy_port *port) { - int err; + /* For classic Copper operation, we don't have any port-specific + * control to do. + */ + if (!port->is_mii) + return 0; =20 - err =3D marvell_probe(phydev); - if (err) - return err; + port->ops =3D &mv88e1510_serdes_port_ops; + + __set_bit(PHY_INTERFACE_MODE_SGMII, port->interfaces); + __set_bit(PHY_INTERFACE_MODE_1000BASEX, port->interfaces); + __set_bit(PHY_INTERFACE_MODE_100BASEX, port->interfaces); =20 - return phy_sfp_probe(phydev, &m88e1510_sfp_ops); + return 0; } =20 static struct phy_driver marvell_drivers[] =3D { @@ -3915,7 +3892,7 @@ static struct phy_driver marvell_drivers[] =3D { .driver_data =3D DEF_MARVELL_HWMON_OPS(m88e1510_hwmon_ops), .features =3D PHY_GBIT_FIBRE_FEATURES, .flags =3D PHY_POLL_CABLE_TEST, - .probe =3D m88e1510_probe, + .probe =3D marvell_probe, .config_init =3D m88e1510_config_init, .config_aneg =3D m88e1510_config_aneg, .read_status =3D marvell_read_status, @@ -3941,6 +3918,7 @@ static struct phy_driver marvell_drivers[] =3D { .led_hw_is_supported =3D m88e1318_led_hw_is_supported, .led_hw_control_set =3D m88e1318_led_hw_control_set, .led_hw_control_get =3D m88e1318_led_hw_control_get, + .attach_port =3D m88e1510_attach_port, }, { .phy_id =3D MARVELL_PHY_ID_88E1540, --=20 2.49.0 From nobody Mon Oct 6 20:59:30 2025 Received: from relay9-d.mail.gandi.net (relay9-d.mail.gandi.net [217.70.183.199]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 33B3C286D7D; Thu, 17 Jul 2025 07:30:42 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=217.70.183.199 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1752737444; cv=none; b=Ga/GfRPrTf7mqzxJNHIkoB01KNDIVaimgrZlKwbafUah3fXCDc+m9D1MHttRbFoZ57WxwJhpUoEKzx6lNYt3i0B9IBjzhr/rNrgDtnBeKTpNkZvaeRyVVdYc9FA5M7VDdnqhSIMJhoD/JlxnuAg896l1KeQJOjyfCP5Z3tYI6+c= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1752737444; c=relaxed/simple; bh=qZq91shlGYPDlmSK7qbYrPHQ6m3IdlXyS8a7m7S5kG0=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=f5lA2vjuOnrydsQYxPrGwuvx/PbW/NwIYVQljv7J8XnFQXU4LBesfGAML92rtlP+VSvJScuhbNc6UeQPywssQ1LWup1eFa2HCBjQT5ZiDiRRt4xVYKb/nk8r7j8IJIRe+m9KbS9RtiNSFofkfWkAKXL1sTRMeWJryvaJTlTOewk= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com; spf=pass smtp.mailfrom=bootlin.com; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b=OTbYLYO9; arc=none smtp.client-ip=217.70.183.199 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=bootlin.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b="OTbYLYO9" Received: by mail.gandi.net (Postfix) with ESMTPSA id 5E935443F3; Thu, 17 Jul 2025 07:30:39 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1752737440; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=9iQH4kxfqf3NCgkxryD8jJxsQEYrTj/jEyun2UwK9nQ=; b=OTbYLYO9CtI7kjeztIY5G9oYjrokYq/1ztbk3utDnIG1E4tKEAJEcan4rGdEclHRA1eG7f ilxtnMKS74hKuRizjGVNgtSDh7bKrdDhLbv8pi1nv4fAeRSq43+hujUvdyKuXHkw51xQOk t6M4e+YbJepdPNDGJL107P+Q/xi05FJ9Qw7mvIDp/vmclyal+tRmMaPFO4tMAAv7+rMZfZ VW6AroFIm3ylha3Rcqgjt1K6QCs8wvd9sHOzWNGaZC/cvXh3/d7hOO8mYUeJBeZvSqGd3V 2b5nC6iLCeTVumOAzIbvEz42GEJJyDohT/UU+ag0NfMQxEYztHw75WqBATm2QQ== From: Maxime Chevallier To: davem@davemloft.net Cc: Maxime Chevallier , netdev@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, thomas.petazzoni@bootlin.com, Andrew Lunn , Jakub Kicinski , Eric Dumazet , Paolo Abeni , Russell King , linux-arm-kernel@lists.infradead.org, Christophe Leroy , Herve Codina , Florian Fainelli , Heiner Kallweit , Vladimir Oltean , =?UTF-8?q?K=C3=B6ry=20Maincent?= , =?UTF-8?q?Marek=20Beh=C3=BAn?= , Oleksij Rempel , =?UTF-8?q?Nicol=C3=B2=20Veronese?= , Simon Horman , mwojtas@chromium.org, Antoine Tenart , devicetree@vger.kernel.org, Conor Dooley , Krzysztof Kozlowski , Rob Herring , Romain Gantois , Daniel Golle , Dimitri Fedrau Subject: [PATCH net-next v9 10/15] net: phy: marvell10g: Support SFP through phy_port Date: Thu, 17 Jul 2025 09:30:14 +0200 Message-ID: <20250717073020.154010-11-maxime.chevallier@bootlin.com> X-Mailer: git-send-email 2.49.0 In-Reply-To: <20250717073020.154010-1-maxime.chevallier@bootlin.com> References: <20250717073020.154010-1-maxime.chevallier@bootlin.com> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable X-GND-State: clean X-GND-Score: -100 X-GND-Cause: gggruggvucftvghtrhhoucdtuddrgeeffedrtdefgdehleellecutefuodetggdotefrodftvfcurfhrohhfihhlvgemucfitefpfffkpdcuggftfghnshhusghstghrihgsvgenuceurghilhhouhhtmecufedtudenucesvcftvggtihhpihgvnhhtshculddquddttddmnecujfgurhephffvvefufffkofgjfhgggfestdekredtredttdenucfhrhhomhepofgrgihimhgvucevhhgvvhgrlhhlihgvrhcuoehmrgigihhmvgdrtghhvghvrghllhhivghrsegsohhothhlihhnrdgtohhmqeenucggtffrrghtthgvrhhnpeevgedtffelffelveeuleelgfejfeevvdejhfehgeefgfffvdefteegvedutefftdenucfkphepvdgrtddumegtsgduleemkegugeehmeegledttdemieehieekmedvlegsudemlegvfhehmegvkegtjeenucevlhhushhtvghrufhiiigvpeehnecurfgrrhgrmhepihhnvghtpedvrgdtudemtggsudelmeekugegheemgeeltddtmeeiheeikeemvdelsgdumeelvghfheemvgektgejpdhhvghlohepfhgvughorhgrrdhhohhmvgdpmhgrihhlfhhrohhmpehmrgigihhmvgdrtghhvghvrghllhhivghrsegsohhothhlihhnrdgtohhmpdhnsggprhgtphhtthhopeefuddprhgtphhtthhopegurghvvghmsegurghvvghmlhhofhhtrdhnvghtpdhrtghpthhtohepmhgrgihimhgvrdgthhgvvhgrlhhlihgvrhessghoohhtlhhinhdrtghomhdprhgtphhtthhopehnvghtuggvvhesvhhgvghrrdhkv ghrnhgvlhdrohhrghdprhgtphhtthhopehlihhnuhigqdhkvghrnhgvlhesvhhgvghrrdhkvghrnhgvlhdrohhrghdprhgtphhtthhopehlihhnuhigqdgrrhhmqdhmshhmsehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtohepthhhohhmrghsrdhpvghtrgiiiihonhhisegsohhothhlihhnrdgtohhmpdhrtghpthhtoheprghnughrvgifsehluhhnnhdrtghhpdhrtghpthhtohepkhhusggrsehkvghrnhgvlhdrohhrgh X-GND-Sasl: maxime.chevallier@bootlin.com Content-Type: text/plain; charset="utf-8" Convert the Marvell10G driver to use the generic SFP handling, through a dedicated .attach_port() handler to populate the port's supported interfaces. As the 88x3310 supports multiple MDI, the .attach_port() logic handles both SFP attach with 10GBaseR support, and support for the "regular" port that usually is a BaseT port. Signed-off-by: Maxime Chevallier Reviewed-by: Christophe Leroy --- drivers/net/phy/marvell10g.c | 47 +++++++++++++++++++----------------- drivers/net/phy/phy_port.c | 20 +++++++++++++++ include/linux/phy_port.h | 1 + 3 files changed, 46 insertions(+), 22 deletions(-) diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c index 13e81dff42c1..7cb638804a3f 100644 --- a/drivers/net/phy/marvell10g.c +++ b/drivers/net/phy/marvell10g.c @@ -28,7 +28,7 @@ #include #include #include -#include +#include #include =20 #define MV_PHY_ALASKA_NBT_QUIRK_MASK 0xfffffffe @@ -463,36 +463,31 @@ static int mv3310_set_edpd(struct phy_device *phydev,= u16 edpd) return err; } =20 -static int mv3310_sfp_insert(void *upstream, const struct sfp_eeprom_id *i= d) +static int mv3310_attach_port(struct phy_device *phydev, struct phy_port *= port) { - struct phy_device *phydev =3D upstream; - __ETHTOOL_DECLARE_LINK_MODE_MASK(support) =3D { 0, }; - DECLARE_PHY_INTERFACE_MASK(interfaces); - phy_interface_t iface; - - sfp_parse_support(phydev->sfp_bus, id, support, interfaces); - iface =3D sfp_select_interface(phydev->sfp_bus, support); - - if (iface !=3D PHY_INTERFACE_MODE_10GBASER) { - dev_err(&phydev->mdio.dev, "incompatible SFP module inserted\n"); - return -EINVAL; + if (port->is_mii) { + __set_bit(PHY_INTERFACE_MODE_10GBASER, port->interfaces); + } else if (port->not_described) { + /* This PHY can do combo-ports, i.e. 2 MDI outputs, usually one + * of them going to an SFP and the other one to a RJ45 + * connector. If we don't have any representation for the port + * in DT, and we are dealing with a non-SFP port, then we + * mask the port's capabilities to report BaseT-only modes + */ + port->mediums =3D BIT(ETHTOOL_LINK_MEDIUM_BASET); + + phy_port_filter_supported(port); } + return 0; } =20 -static const struct sfp_upstream_ops mv3310_sfp_ops =3D { - .attach =3D phy_sfp_attach, - .detach =3D phy_sfp_detach, - .connect_phy =3D phy_sfp_connect_phy, - .disconnect_phy =3D phy_sfp_disconnect_phy, - .module_insert =3D mv3310_sfp_insert, -}; - static int mv3310_probe(struct phy_device *phydev) { const struct mv3310_chip *chip =3D to_mv3310_chip(phydev); struct mv3310_priv *priv; u32 mmd_mask =3D MDIO_DEVS_PMAPMD | MDIO_DEVS_AN; + DECLARE_PHY_INTERFACE_MASK(interfaces); int ret; =20 if (!phydev->is_c45 || @@ -543,9 +538,13 @@ static int mv3310_probe(struct phy_device *phydev) if (ret) return ret; =20 + __set_bit(PHY_INTERFACE_MODE_10GBASER, interfaces); + chip->init_supported_interfaces(priv->supported_interfaces); =20 - return phy_sfp_probe(phydev, &mv3310_sfp_ops); + phydev->max_n_ports =3D 2; + + return 0; } =20 static void mv3310_remove(struct phy_device *phydev) @@ -1406,6 +1405,7 @@ static struct phy_driver mv3310_drivers[] =3D { .set_loopback =3D genphy_c45_loopback, .get_wol =3D mv3110_get_wol, .set_wol =3D mv3110_set_wol, + .attach_port =3D mv3310_attach_port, }, { .phy_id =3D MARVELL_PHY_ID_88X3310, @@ -1425,6 +1425,7 @@ static struct phy_driver mv3310_drivers[] =3D { .set_tunable =3D mv3310_set_tunable, .remove =3D mv3310_remove, .set_loopback =3D genphy_c45_loopback, + .attach_port =3D mv3310_attach_port, }, { .phy_id =3D MARVELL_PHY_ID_88E2110, @@ -1445,6 +1446,7 @@ static struct phy_driver mv3310_drivers[] =3D { .set_loopback =3D genphy_c45_loopback, .get_wol =3D mv3110_get_wol, .set_wol =3D mv3110_set_wol, + .attach_port =3D mv3310_attach_port, }, { .phy_id =3D MARVELL_PHY_ID_88E2110, @@ -1463,6 +1465,7 @@ static struct phy_driver mv3310_drivers[] =3D { .set_tunable =3D mv3310_set_tunable, .remove =3D mv3310_remove, .set_loopback =3D genphy_c45_loopback, + .attach_port =3D mv3310_attach_port, }, }; =20 diff --git a/drivers/net/phy/phy_port.c b/drivers/net/phy/phy_port.c index 36de8c5c9ad5..cd7ace64ed4b 100644 --- a/drivers/net/phy/phy_port.c +++ b/drivers/net/phy/phy_port.c @@ -131,6 +131,26 @@ void phy_port_update_supported(struct phy_port *port) } EXPORT_SYMBOL_GPL(phy_port_update_supported); =20 +/** + * phy_port_filter_supported() - Make sure that port->supported match port= ->mediums + * @port: The port to filter + * + * After updating a port's mediums to a more restricted subset, this helpe= r will + * make sure that port->supported only contains linkmodes that are compati= ble + * with port->mediums. + */ +void phy_port_filter_supported(struct phy_port *port) +{ + __ETHTOOL_DECLARE_LINK_MODE_MASK(supported) =3D { 0 }; + int i; + + for_each_set_bit(i, &port->mediums, __ETHTOOL_LINK_MEDIUM_LAST) + phy_caps_medium_get_supported(supported, i, port->lanes); + + linkmode_and(port->supported, port->supported, supported); +} +EXPORT_SYMBOL_GPL(phy_port_filter_supported); + /** * phy_port_get_type() - get the PORT_* attribut for that port. * @port: The port we want the information from diff --git a/include/linux/phy_port.h b/include/linux/phy_port.h index f47ac5f5ef9e..ce735d81bcd0 100644 --- a/include/linux/phy_port.h +++ b/include/linux/phy_port.h @@ -90,6 +90,7 @@ static inline bool phy_port_is_fiber(struct phy_port *por= t) } =20 void phy_port_update_supported(struct phy_port *port); +void phy_port_filter_supported(struct phy_port *port); =20 int phy_port_get_type(struct phy_port *port); =20 --=20 2.49.0 From nobody Mon Oct 6 20:59:30 2025 Received: from relay9-d.mail.gandi.net (relay9-d.mail.gandi.net [217.70.183.199]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id D89B8288C0F; Thu, 17 Jul 2025 07:30:43 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=217.70.183.199 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1752737446; cv=none; b=SDNb+CKedf+Sn+Y0TL70zE7CtBLdtqPDU9e2YnNtNPisOcN+uISzYDa/D3PsdM7uF9goOgCYSC7090IYPUFEDf+yhMhNaXR4WlpxjGn5c4yy7lRkUgPQvog++0StFMDaVzHng1nwWNhIs/K5CMXgZxmrI0f/Y2fBCR4GhejPSxs= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1752737446; c=relaxed/simple; bh=rmOVkSEMORFr8uBqPlGPFvaHFagsgq3dq29tBubP67s=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=sSmUyHaqZRyVEV4q7ZjTRjTEeEUzcxboITIESbnT/LhTOVtLWSiigRFwWUejrGJE1cEvDPDsOkaxC+52PP+Zh1oVQ27sY6xWFYMKXDTs2mBqdXGIitV4nSqqK/hcyiWHQ8kvomB50N1yWQIWzMffdrmu/ZUiNoUKK1cYcTI5KMQ= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com; spf=pass smtp.mailfrom=bootlin.com; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b=hRYKzqxV; arc=none smtp.client-ip=217.70.183.199 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=bootlin.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b="hRYKzqxV" Received: by mail.gandi.net (Postfix) with ESMTPSA id D348E443F0; Thu, 17 Jul 2025 07:30:40 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1752737442; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=7gNgiyMv2bSdDu5VMOx6z036osR1pFqt9yiUokhcsoo=; b=hRYKzqxVbhocKsFTqNofFZ0QOBEkSXzQkR+0A/alMft7yH7hrwXQxXtkD+GTSd2rgxOfGd BaAdHOryHiKxsDaEFZlSn8tURKcIlBXBSwE7qsDaw+05iP1qehnUKoJ+nBfZreVhM8X7fN B+v7/amCaSJbOJJb4A/RpKHA1Cg+Hw+k8Bts42eoDUWV/fNUcbwceesg8/jSY2MO5HDjEd g41ag+kowaqJtpelJPMP+wwZQeQ5URrA3dicbQTw4PuTm2o4m6nxv+N+qUBHG3Xo6qR6+Q LdNNnYtJIHa8iO09HvDpJgHB7vqjbksaEDlI65q37J8XVsH1g1nq3fb7fELeIQ== From: Maxime Chevallier To: davem@davemloft.net Cc: Maxime Chevallier , netdev@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, thomas.petazzoni@bootlin.com, Andrew Lunn , Jakub Kicinski , Eric Dumazet , Paolo Abeni , Russell King , linux-arm-kernel@lists.infradead.org, Christophe Leroy , Herve Codina , Florian Fainelli , Heiner Kallweit , Vladimir Oltean , =?UTF-8?q?K=C3=B6ry=20Maincent?= , =?UTF-8?q?Marek=20Beh=C3=BAn?= , Oleksij Rempel , =?UTF-8?q?Nicol=C3=B2=20Veronese?= , Simon Horman , mwojtas@chromium.org, Antoine Tenart , devicetree@vger.kernel.org, Conor Dooley , Krzysztof Kozlowski , Rob Herring , Romain Gantois , Daniel Golle , Dimitri Fedrau Subject: [PATCH net-next v9 11/15] net: phy: at803x: Support SFP through phy_port interface Date: Thu, 17 Jul 2025 09:30:15 +0200 Message-ID: <20250717073020.154010-12-maxime.chevallier@bootlin.com> X-Mailer: git-send-email 2.49.0 In-Reply-To: <20250717073020.154010-1-maxime.chevallier@bootlin.com> References: <20250717073020.154010-1-maxime.chevallier@bootlin.com> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable X-GND-State: clean X-GND-Score: -100 X-GND-Cause: gggruggvucftvghtrhhoucdtuddrgeeffedrtdefgdehleellecutefuodetggdotefrodftvfcurfhrohhfihhlvgemucfitefpfffkpdcuggftfghnshhusghstghrihgsvgenuceurghilhhouhhtmecufedtudenucesvcftvggtihhpihgvnhhtshculddquddttddmnecujfgurhephffvvefufffkofgjfhgggfestdekredtredttdenucfhrhhomhepofgrgihimhgvucevhhgvvhgrlhhlihgvrhcuoehmrgigihhmvgdrtghhvghvrghllhhivghrsegsohhothhlihhnrdgtohhmqeenucggtffrrghtthgvrhhnpeevgedtffelffelveeuleelgfejfeevvdejhfehgeefgfffvdefteegvedutefftdenucfkphepvdgrtddumegtsgduleemkegugeehmeegledttdemieehieekmedvlegsudemlegvfhehmegvkegtjeenucevlhhushhtvghrufhiiigvpeelnecurfgrrhgrmhepihhnvghtpedvrgdtudemtggsudelmeekugegheemgeeltddtmeeiheeikeemvdelsgdumeelvghfheemvgektgejpdhhvghlohepfhgvughorhgrrdhhohhmvgdpmhgrihhlfhhrohhmpehmrgigihhmvgdrtghhvghvrghllhhivghrsegsohhothhlihhnrdgtohhmpdhnsggprhgtphhtthhopeefuddprhgtphhtthhopegurghvvghmsegurghvvghmlhhofhhtrdhnvghtpdhrtghpthhtohepmhgrgihimhgvrdgthhgvvhgrlhhlihgvrhessghoohhtlhhinhdrtghomhdprhgtphhtthhopehnvghtuggvvhesvhhgvghrrdhkv ghrnhgvlhdrohhrghdprhgtphhtthhopehlihhnuhigqdhkvghrnhgvlhesvhhgvghrrdhkvghrnhgvlhdrohhrghdprhgtphhtthhopehlihhnuhigqdgrrhhmqdhmshhmsehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtohepthhhohhmrghsrdhpvghtrgiiiihonhhisegsohhothhlihhnrdgtohhmpdhrtghpthhtoheprghnughrvgifsehluhhnnhdrtghhpdhrtghpthhtohepkhhusggrsehkvghrnhgvlhdrohhrgh X-GND-Sasl: maxime.chevallier@bootlin.com Content-Type: text/plain; charset="utf-8" Convert the at803x driver to use the generic phylib SFP handling, via a dedicated .attach_port() callback, populating the supported interfaces. As these devices are limited to 1000BaseX, a workaround is used to also support, in a very limited way, copper modules. This is done by supporting SGMII but limiting it to 1G full duplex (in which case it's somwhat compatible with 1000BaseX). Signed-off-by: Maxime Chevallier Reviewed-by: Christophe Leroy --- drivers/net/phy/qcom/at803x.c | 64 ++++++++++------------------------- 1 file changed, 17 insertions(+), 47 deletions(-) diff --git a/drivers/net/phy/qcom/at803x.c b/drivers/net/phy/qcom/at803x.c index 51a132242462..526c88051487 100644 --- a/drivers/net/phy/qcom/at803x.c +++ b/drivers/net/phy/qcom/at803x.c @@ -20,7 +20,7 @@ #include #include #include -#include +#include #include =20 #include "qcom.h" @@ -769,58 +769,28 @@ static int at8031_register_regulators(struct phy_devi= ce *phydev) return 0; } =20 -static int at8031_sfp_insert(void *upstream, const struct sfp_eeprom_id *i= d) +static int at8031_attach_port(struct phy_device *phydev, struct phy_port *= port) { - struct phy_device *phydev =3D upstream; - __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_support); - __ETHTOOL_DECLARE_LINK_MODE_MASK(sfp_support); - DECLARE_PHY_INTERFACE_MASK(interfaces); - phy_interface_t iface; - - linkmode_zero(phy_support); - phylink_set(phy_support, 1000baseX_Full); - phylink_set(phy_support, 1000baseT_Full); - phylink_set(phy_support, Autoneg); - phylink_set(phy_support, Pause); - phylink_set(phy_support, Asym_Pause); - - linkmode_zero(sfp_support); - sfp_parse_support(phydev->sfp_bus, id, sfp_support, interfaces); - /* Some modules support 10G modes as well as others we support. - * Mask out non-supported modes so the correct interface is picked. - */ - linkmode_and(sfp_support, phy_support, sfp_support); - - if (linkmode_empty(sfp_support)) { - dev_err(&phydev->mdio.dev, "incompatible SFP module inserted\n"); - return -EINVAL; - } + if (!port->is_mii) + return 0; =20 - iface =3D sfp_select_interface(phydev->sfp_bus, sfp_support); + linkmode_zero(port->supported); + phylink_set(port->supported, 1000baseX_Full); + phylink_set(port->supported, 1000baseT_Full); + phylink_set(port->supported, Autoneg); + phylink_set(port->supported, Pause); + phylink_set(port->supported, Asym_Pause); =20 - /* Only 1000Base-X is supported by AR8031/8033 as the downstream SerDes - * interface for use with SFP modules. - * However, some copper modules detected as having a preferred SGMII - * interface do default to and function in 1000Base-X mode, so just - * print a warning and allow such modules, as they may have some chance - * of working. + /* This device doesn't really support SGMII. However, do our best + * to be compatible with copper modules (that usually require SGMII), + * in a degraded mode as we only allow 1000BaseT Full */ - if (iface =3D=3D PHY_INTERFACE_MODE_SGMII) - dev_warn(&phydev->mdio.dev, "module may not function if 1000Base-X not s= upported\n"); - else if (iface !=3D PHY_INTERFACE_MODE_1000BASEX) - return -EINVAL; + __set_bit(PHY_INTERFACE_MODE_SGMII, port->interfaces); + __set_bit(PHY_INTERFACE_MODE_1000BASEX, port->interfaces); =20 return 0; } =20 -static const struct sfp_upstream_ops at8031_sfp_ops =3D { - .attach =3D phy_sfp_attach, - .detach =3D phy_sfp_detach, - .module_insert =3D at8031_sfp_insert, - .connect_phy =3D phy_sfp_connect_phy, - .disconnect_phy =3D phy_sfp_disconnect_phy, -}; - static int at8031_parse_dt(struct phy_device *phydev) { struct device_node *node =3D phydev->mdio.dev.of_node; @@ -841,8 +811,7 @@ static int at8031_parse_dt(struct phy_device *phydev) return ret; } =20 - /* Only AR8031/8033 support 1000Base-X for SFP modules */ - return phy_sfp_probe(phydev, &at8031_sfp_ops); + return 0; } =20 static int at8031_probe(struct phy_device *phydev) @@ -1173,6 +1142,7 @@ static struct phy_driver at803x_driver[] =3D { .set_tunable =3D at803x_set_tunable, .cable_test_start =3D at8031_cable_test_start, .cable_test_get_status =3D at8031_cable_test_get_status, + .attach_port =3D at8031_attach_port, }, { /* Qualcomm Atheros AR8032 */ PHY_ID_MATCH_EXACT(ATH8032_PHY_ID), --=20 2.49.0 From nobody Mon Oct 6 20:59:30 2025 Received: from relay9-d.mail.gandi.net (relay9-d.mail.gandi.net [217.70.183.199]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 4CF2C28A1CB; Thu, 17 Jul 2025 07:30:44 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=217.70.183.199 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1752737448; cv=none; b=TJJCwOfaB4n2jYY4K8DVzdeCwtFoJZ9p0iCbumB3DyovMjjmlTOLn5h/dpAHDQvr/LVY0YbuDUlZY7uJT63iwwW0+ZmwIxzzdJKbbXEcGdXofZ8U9RKxnvBVvZjnHKMm78R0gsFd6ESX/qZ0iGn/I7K3R/28lmYsiIhfAMCn0MQ= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1752737448; c=relaxed/simple; bh=wK6s7mAYkYPJRqoutgkfeCOCzsu+q4gClu5YOlvachU=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=ZYDxjhBNVX4Zbu98iYInKnFoIyB8f2DmdD2OY7pEIigImaIysvSQ6rmt6QgPbanzX35Tpmi+HlCOQDocpyvptPflDAbJp6DKtgNGiOKAQkr985Hi6kYc+1w8cGBNfCn6wQ3DwzQqTjb0jVtn82ZSQQCZM2OJJgy9DB5OLuVXW0o= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com; spf=pass smtp.mailfrom=bootlin.com; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b=DQfN6tZZ; arc=none smtp.client-ip=217.70.183.199 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=bootlin.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b="DQfN6tZZ" Received: by mail.gandi.net (Postfix) with ESMTPSA id 565A2443F4; Thu, 17 Jul 2025 07:30:42 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1752737443; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=9adhkQWxi71IBDaxFr3WPdVhxePQHRlsmcLimnWozx8=; b=DQfN6tZZWRmC0wA4u4OC3VzVte097hl+vBcwRzHdKGi0nMRqZsin3Q3YyPCBlP/2ppWqy8 kStbBSagWN72LH36ispxd4wh0b6/AjXdrKO7KPpA+ZKAvEXCXA9lyk9H4sYNA4GNE52j/l iVI5Tc99hrdIqfewpc0fk7sXYns2+hC5HU10thzCCKbTT4ab3eHfLb6VzgoXCITSGyjrzD afcgrbyLJgBbrrzxy68DmNPfPR0KQlT00USFJf4NFgnw0/g2G+HNO1obd/w91p9Gy7RTHM K+gsA4qBcwf1+26F7wAgTAbhAayOJwC6al3KF3x62OEOnAPV6jTI5iOmKU8vyg== From: Maxime Chevallier To: davem@davemloft.net Cc: Maxime Chevallier , netdev@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, thomas.petazzoni@bootlin.com, Andrew Lunn , Jakub Kicinski , Eric Dumazet , Paolo Abeni , Russell King , linux-arm-kernel@lists.infradead.org, Christophe Leroy , Herve Codina , Florian Fainelli , Heiner Kallweit , Vladimir Oltean , =?UTF-8?q?K=C3=B6ry=20Maincent?= , =?UTF-8?q?Marek=20Beh=C3=BAn?= , Oleksij Rempel , =?UTF-8?q?Nicol=C3=B2=20Veronese?= , Simon Horman , mwojtas@chromium.org, Antoine Tenart , devicetree@vger.kernel.org, Conor Dooley , Krzysztof Kozlowski , Rob Herring , Romain Gantois , Daniel Golle , Dimitri Fedrau Subject: [PATCH net-next v9 12/15] net: phy: qca807x: Support SFP through phy_port interface Date: Thu, 17 Jul 2025 09:30:16 +0200 Message-ID: <20250717073020.154010-13-maxime.chevallier@bootlin.com> X-Mailer: git-send-email 2.49.0 In-Reply-To: <20250717073020.154010-1-maxime.chevallier@bootlin.com> References: <20250717073020.154010-1-maxime.chevallier@bootlin.com> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable X-GND-State: clean X-GND-Score: -100 X-GND-Cause: gggruggvucftvghtrhhoucdtuddrgeeffedrtdefgdehleellecutefuodetggdotefrodftvfcurfhrohhfihhlvgemucfitefpfffkpdcuggftfghnshhusghstghrihgsvgenuceurghilhhouhhtmecufedtudenucesvcftvggtihhpihgvnhhtshculddquddttddmnecujfgurhephffvvefufffkofgjfhgggfestdekredtredttdenucfhrhhomhepofgrgihimhgvucevhhgvvhgrlhhlihgvrhcuoehmrgigihhmvgdrtghhvghvrghllhhivghrsegsohhothhlihhnrdgtohhmqeenucggtffrrghtthgvrhhnpeevgedtffelffelveeuleelgfejfeevvdejhfehgeefgfffvdefteegvedutefftdenucfkphepvdgrtddumegtsgduleemkegugeehmeegledttdemieehieekmedvlegsudemlegvfhehmegvkegtjeenucevlhhushhtvghrufhiiigvpeelnecurfgrrhgrmhepihhnvghtpedvrgdtudemtggsudelmeekugegheemgeeltddtmeeiheeikeemvdelsgdumeelvghfheemvgektgejpdhhvghlohepfhgvughorhgrrdhhohhmvgdpmhgrihhlfhhrohhmpehmrgigihhmvgdrtghhvghvrghllhhivghrsegsohhothhlihhnrdgtohhmpdhnsggprhgtphhtthhopeefuddprhgtphhtthhopegurghvvghmsegurghvvghmlhhofhhtrdhnvghtpdhrtghpthhtohepmhgrgihimhgvrdgthhgvvhgrlhhlihgvrhessghoohhtlhhinhdrtghomhdprhgtphhtthhopehnvghtuggvvhesvhhgvghrrdhkv ghrnhgvlhdrohhrghdprhgtphhtthhopehlihhnuhigqdhkvghrnhgvlhesvhhgvghrrdhkvghrnhgvlhdrohhrghdprhgtphhtthhopehlihhnuhigqdgrrhhmqdhmshhmsehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtohepthhhohhmrghsrdhpvghtrgiiiihonhhisegsohhothhlihhnrdgtohhmpdhrtghpthhtoheprghnughrvgifsehluhhnnhdrtghhpdhrtghpthhtohepkhhusggrsehkvghrnhgvlhdrohhrgh X-GND-Sasl: maxime.chevallier@bootlin.com Content-Type: text/plain; charset="utf-8" QCA8072/8075 may be used as combo-port PHYs, with Serdes (100/1000BaseX) and Copper interfaces. The PHY has the ability to read the configuration it's in. If the configuration indicates the PHY is in combo mode, allow registering up to 2 ports. Register a dedicated set of port ops to handle the serdes port, and rely on generic phylib SFP support for the SFP handling. Signed-off-by: Maxime Chevallier Reviewed-by: Christophe Leroy --- drivers/net/phy/qcom/qca807x.c | 75 +++++++++++++++------------------- 1 file changed, 32 insertions(+), 43 deletions(-) diff --git a/drivers/net/phy/qcom/qca807x.c b/drivers/net/phy/qcom/qca807x.c index 6d10ef7e9a8a..ce92836b2472 100644 --- a/drivers/net/phy/qcom/qca807x.c +++ b/drivers/net/phy/qcom/qca807x.c @@ -13,7 +13,7 @@ #include #include #include -#include +#include =20 #include "../phylib.h" #include "qcom.h" @@ -642,67 +642,55 @@ static int qca807x_phy_package_config_init_once(struc= t phy_device *phydev) return ret; } =20 -static int qca807x_sfp_insert(void *upstream, const struct sfp_eeprom_id *= id) +static int qca807x_configure_serdes(struct phy_port *port, bool enable, + phy_interface_t interface) { - struct phy_device *phydev =3D upstream; - __ETHTOOL_DECLARE_LINK_MODE_MASK(support) =3D { 0, }; - phy_interface_t iface; + struct phy_device *phydev =3D port_phydev(port); int ret; - DECLARE_PHY_INTERFACE_MASK(interfaces); =20 - sfp_parse_support(phydev->sfp_bus, id, support, interfaces); - iface =3D sfp_select_interface(phydev->sfp_bus, support); + if (!phydev) + return -ENODEV; =20 - dev_info(&phydev->mdio.dev, "%s SFP module inserted\n", phy_modes(iface)); - - switch (iface) { - case PHY_INTERFACE_MODE_1000BASEX: - case PHY_INTERFACE_MODE_100BASEX: + if (enable) { /* Set PHY mode to PSGMII combo (1/4 copper + combo ports) mode */ ret =3D phy_modify(phydev, QCA807X_CHIP_CONFIGURATION, QCA807X_CHIP_CONFIGURATION_MODE_CFG_MASK, QCA807X_CHIP_CONFIGURATION_MODE_PSGMII_FIBER); + if (ret) + return ret; /* Enable fiber mode autodection (1000Base-X or 100Base-FX) */ ret =3D phy_set_bits_mmd(phydev, MDIO_MMD_AN, QCA807X_MMD7_FIBER_MODE_AUTO_DETECTION, QCA807X_MMD7_FIBER_MODE_AUTO_DETECTION_EN); - /* Select fiber page */ - ret =3D phy_clear_bits(phydev, - QCA807X_CHIP_CONFIGURATION, - QCA807X_BT_BX_REG_SEL); - - phydev->port =3D PORT_FIBRE; - break; - default: - dev_err(&phydev->mdio.dev, "Incompatible SFP module inserted\n"); - return -EINVAL; + if (ret) + return ret; } =20 - return ret; + phydev->port =3D enable ? PORT_FIBRE : PORT_TP; + + return phy_modify(phydev, QCA807X_CHIP_CONFIGURATION, + QCA807X_BT_BX_REG_SEL, + enable ? 0 : QCA807X_BT_BX_REG_SEL); } =20 -static void qca807x_sfp_remove(void *upstream) +static const struct phy_port_ops qca807x_serdes_port_ops =3D { + .configure_mii =3D qca807x_configure_serdes, +}; + +static int qca807x_attach_port(struct phy_device *phydev, struct phy_port = *port) { - struct phy_device *phydev =3D upstream; + if (!port->is_mii) + return 0; =20 - /* Select copper page */ - phy_set_bits(phydev, - QCA807X_CHIP_CONFIGURATION, - QCA807X_BT_BX_REG_SEL); + __set_bit(PHY_INTERFACE_MODE_1000BASEX, port->interfaces); + __set_bit(PHY_INTERFACE_MODE_100BASEX, port->interfaces); =20 - phydev->port =3D PORT_TP; -} + port->ops =3D &qca807x_serdes_port_ops; =20 -static const struct sfp_upstream_ops qca807x_sfp_ops =3D { - .attach =3D phy_sfp_attach, - .detach =3D phy_sfp_detach, - .module_insert =3D qca807x_sfp_insert, - .module_remove =3D qca807x_sfp_remove, - .connect_phy =3D phy_sfp_connect_phy, - .disconnect_phy =3D phy_sfp_disconnect_phy, -}; + return 0; +} =20 static int qca807x_probe(struct phy_device *phydev) { @@ -744,9 +732,8 @@ static int qca807x_probe(struct phy_device *phydev) =20 /* Attach SFP bus on combo port*/ if (phy_read(phydev, QCA807X_CHIP_CONFIGURATION)) { - ret =3D phy_sfp_probe(phydev, &qca807x_sfp_ops); - if (ret) - return ret; + phydev->max_n_ports =3D 2; + linkmode_set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, phydev->supported); linkmode_set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, phydev->advertising); } @@ -800,6 +787,7 @@ static struct phy_driver qca807x_drivers[] =3D { .suspend =3D genphy_suspend, .cable_test_start =3D qca807x_cable_test_start, .cable_test_get_status =3D qca808x_cable_test_get_status, + .attach_port =3D qca807x_attach_port, }, { PHY_ID_MATCH_EXACT(PHY_ID_QCA8075), @@ -823,6 +811,7 @@ static struct phy_driver qca807x_drivers[] =3D { .led_hw_is_supported =3D qca807x_led_hw_is_supported, .led_hw_control_set =3D qca807x_led_hw_control_set, .led_hw_control_get =3D qca807x_led_hw_control_get, + .attach_port =3D qca807x_attach_port, }, }; module_phy_driver(qca807x_drivers); --=20 2.49.0 From nobody Mon Oct 6 20:59:30 2025 Received: from relay9-d.mail.gandi.net (relay9-d.mail.gandi.net [217.70.183.199]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id D04AC28A3FA; Thu, 17 Jul 2025 07:30:46 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=217.70.183.199 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1752737449; cv=none; b=cm3dAxbfOz+tFEbQR19Kzw12KSEQJmRF1/mf+lU2I3Yu2qxKKTn4V7W0RVA297wHAtMozYGChqhxzPjzazoJtQccubo+64uLnja6wPIW6CrFxUrz8MjVQzTEP3KgmNJBqgMtPwu1tSCjHh+DOGKVQ7SL0p+NwxSf9rTfKFp59Oc= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1752737449; c=relaxed/simple; bh=0lw7YpxGK0B91U9qbvXe15g4SKC+i034MLK0Ys9xyw4=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=XOYPKkwO89/UT7qw/LumWhXftQyKpnLzKrkHaJ0gwUriztiqhIGf9TBDoZjD8BvOmu+hXYJ8E2qY18R5VayEJADqAC3rLuaIaI76A3fIEdnwDgYPooW71dDLcVWtiuBxGmTFLXdP1SZ3emZjDWCK/DuQ25gt9TCckTMT9aqm1lA= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com; spf=pass smtp.mailfrom=bootlin.com; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b=aa9nlXNk; arc=none smtp.client-ip=217.70.183.199 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=bootlin.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b="aa9nlXNk" Received: by mail.gandi.net (Postfix) with ESMTPSA id D34C7443F6; Thu, 17 Jul 2025 07:30:43 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1752737445; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=M+c6gG67vdFsKda6/1bwU9cO4GgONAjjqGIsxKc7Sek=; b=aa9nlXNkj7rY1XvuH2BnNpBO8sxyXB1oVp36z7dU9TXIuyyoj7Y8jEFoBLi089i6/NGA1J 3BCsjPtlYYLzzByh5lAgpgJUtpkwlqVZBfdCJkiRXYPv9FHnMGF1j7lwgly4ocf/1svs0C lWvV1A2gXp8oepNgWO9shPWBNWX1ayVJQpXxDk+7U4gKh/LwA/mFwHc9FPc7sL/c/sdBgP 79eF4YSJCsfQ71kfUrx5KPeQ15z+4fsI3rnuNYY/cDXOz4rL9eHAIokeavdGEnPfCvOhi/ sb2NQat2GqO7BKiA5ANFIEFQPxulmK1CVcPl0K/Qx0LCW1swfe7OkaKUToKg5A== From: Maxime Chevallier To: davem@davemloft.net Cc: Maxime Chevallier , netdev@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, thomas.petazzoni@bootlin.com, Andrew Lunn , Jakub Kicinski , Eric Dumazet , Paolo Abeni , Russell King , linux-arm-kernel@lists.infradead.org, Christophe Leroy , Herve Codina , Florian Fainelli , Heiner Kallweit , Vladimir Oltean , =?UTF-8?q?K=C3=B6ry=20Maincent?= , =?UTF-8?q?Marek=20Beh=C3=BAn?= , Oleksij Rempel , =?UTF-8?q?Nicol=C3=B2=20Veronese?= , Simon Horman , mwojtas@chromium.org, Antoine Tenart , devicetree@vger.kernel.org, Conor Dooley , Krzysztof Kozlowski , Rob Herring , Romain Gantois , Daniel Golle , Dimitri Fedrau Subject: [PATCH net-next v9 13/15] net: phy: Only rely on phy_port for PHY-driven SFP Date: Thu, 17 Jul 2025 09:30:17 +0200 Message-ID: <20250717073020.154010-14-maxime.chevallier@bootlin.com> X-Mailer: git-send-email 2.49.0 In-Reply-To: <20250717073020.154010-1-maxime.chevallier@bootlin.com> References: <20250717073020.154010-1-maxime.chevallier@bootlin.com> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable X-GND-State: clean X-GND-Score: -100 X-GND-Cause: gggruggvucftvghtrhhoucdtuddrgeeffedrtdefgdehleellecutefuodetggdotefrodftvfcurfhrohhfihhlvgemucfitefpfffkpdcuggftfghnshhusghstghrihgsvgenuceurghilhhouhhtmecufedtudenucesvcftvggtihhpihgvnhhtshculddquddttddmnecujfgurhephffvvefufffkofgjfhgggfestdekredtredttdenucfhrhhomhepofgrgihimhgvucevhhgvvhgrlhhlihgvrhcuoehmrgigihhmvgdrtghhvghvrghllhhivghrsegsohhothhlihhnrdgtohhmqeenucggtffrrghtthgvrhhnpeevgedtffelffelveeuleelgfejfeevvdejhfehgeefgfffvdefteegvedutefftdenucfkphepvdgrtddumegtsgduleemkegugeehmeegledttdemieehieekmedvlegsudemlegvfhehmegvkegtjeenucevlhhushhtvghrufhiiigvpeelnecurfgrrhgrmhepihhnvghtpedvrgdtudemtggsudelmeekugegheemgeeltddtmeeiheeikeemvdelsgdumeelvghfheemvgektgejpdhhvghlohepfhgvughorhgrrdhhohhmvgdpmhgrihhlfhhrohhmpehmrgigihhmvgdrtghhvghvrghllhhivghrsegsohhothhlihhnrdgtohhmpdhnsggprhgtphhtthhopeefuddprhgtphhtthhopegurghvvghmsegurghvvghmlhhofhhtrdhnvghtpdhrtghpthhtohepmhgrgihimhgvrdgthhgvvhgrlhhlihgvrhessghoohhtlhhinhdrtghomhdprhgtphhtthhopehnvghtuggvvhesvhhgvghrrdhkv ghrnhgvlhdrohhrghdprhgtphhtthhopehlihhnuhigqdhkvghrnhgvlhesvhhgvghrrdhkvghrnhgvlhdrohhrghdprhgtphhtthhopehlihhnuhigqdgrrhhmqdhmshhmsehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtohepthhhohhmrghsrdhpvghtrgiiiihonhhisegsohhothhlihhnrdgtohhmpdhrtghpthhtoheprghnughrvgifsehluhhnnhdrtghhpdhrtghpthhtohepkhhusggrsehkvghrnhgvlhdrohhrgh X-GND-Sasl: maxime.chevallier@bootlin.com Content-Type: text/plain; charset="utf-8" Now that all PHY drivers that support downstream SFP have been converted to phy_port serdes handling, we can make the generic PHY SFP handling mandatory, thus making all phylib sfp helpers static. Signed-off-by: Maxime Chevallier Reviewed-by: Christophe Leroy --- drivers/net/phy/phy_device.c | 28 +++++++++------------------- include/linux/phy.h | 6 ------ 2 files changed, 9 insertions(+), 25 deletions(-) diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 195559df81ad..c7a2ed6a606f 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -1521,7 +1521,7 @@ static DEVICE_ATTR_RO(phy_standalone); * * Return: 0 on success, otherwise a negative error code. */ -int phy_sfp_connect_phy(void *upstream, struct phy_device *phy) +static int phy_sfp_connect_phy(void *upstream, struct phy_device *phy) { struct phy_device *phydev =3D upstream; struct net_device *dev =3D phydev->attached_dev; @@ -1531,7 +1531,6 @@ int phy_sfp_connect_phy(void *upstream, struct phy_de= vice *phy) =20 return 0; } -EXPORT_SYMBOL(phy_sfp_connect_phy); =20 /** * phy_sfp_disconnect_phy - Disconnect the SFP module's PHY from the upstr= eam PHY @@ -1543,7 +1542,7 @@ EXPORT_SYMBOL(phy_sfp_connect_phy); * will be destroyed, re-inserting the same module will add a new phy with= a * new index. */ -void phy_sfp_disconnect_phy(void *upstream, struct phy_device *phy) +static void phy_sfp_disconnect_phy(void *upstream, struct phy_device *phy) { struct phy_device *phydev =3D upstream; struct net_device *dev =3D phydev->attached_dev; @@ -1551,7 +1550,6 @@ void phy_sfp_disconnect_phy(void *upstream, struct ph= y_device *phy) if (dev) phy_link_topo_del_phy(dev, phy); } -EXPORT_SYMBOL(phy_sfp_disconnect_phy); =20 /** * phy_sfp_attach - attach the SFP bus to the PHY upstream network device @@ -1560,7 +1558,7 @@ EXPORT_SYMBOL(phy_sfp_disconnect_phy); * * This is used to fill in the sfp_upstream_ops .attach member. */ -void phy_sfp_attach(void *upstream, struct sfp_bus *bus) +static void phy_sfp_attach(void *upstream, struct sfp_bus *bus) { struct phy_device *phydev =3D upstream; =20 @@ -1568,7 +1566,6 @@ void phy_sfp_attach(void *upstream, struct sfp_bus *b= us) phydev->attached_dev->sfp_bus =3D bus; phydev->sfp_bus_attached =3D true; } -EXPORT_SYMBOL(phy_sfp_attach); =20 /** * phy_sfp_detach - detach the SFP bus from the PHY upstream network device @@ -1577,7 +1574,7 @@ EXPORT_SYMBOL(phy_sfp_attach); * * This is used to fill in the sfp_upstream_ops .detach member. */ -void phy_sfp_detach(void *upstream, struct sfp_bus *bus) +static void phy_sfp_detach(void *upstream, struct sfp_bus *bus) { struct phy_device *phydev =3D upstream; =20 @@ -1585,7 +1582,6 @@ void phy_sfp_detach(void *upstream, struct sfp_bus *b= us) phydev->attached_dev->sfp_bus =3D NULL; phydev->sfp_bus_attached =3D false; } -EXPORT_SYMBOL(phy_sfp_detach); =20 static int phy_sfp_module_insert(void *upstream, const struct sfp_eeprom_i= d *id) { @@ -1731,10 +1727,8 @@ static int phy_setup_sfp_port(struct phy_device *phy= dev) /** * phy_sfp_probe - probe for a SFP cage attached to this PHY device * @phydev: Pointer to phy_device - * @ops: SFP's upstream operations */ -int phy_sfp_probe(struct phy_device *phydev, - const struct sfp_upstream_ops *ops) +static int phy_sfp_probe(struct phy_device *phydev) { struct sfp_bus *bus; int ret =3D 0; @@ -1746,7 +1740,7 @@ int phy_sfp_probe(struct phy_device *phydev, =20 phydev->sfp_bus =3D bus; =20 - ret =3D sfp_bus_add_upstream(bus, phydev, ops); + ret =3D sfp_bus_add_upstream(bus, phydev, &sfp_phydev_ops); sfp_bus_put(bus); } =20 @@ -1755,7 +1749,6 @@ int phy_sfp_probe(struct phy_device *phydev, =20 return ret; } -EXPORT_SYMBOL(phy_sfp_probe); =20 static bool phy_drv_supports_irq(const struct phy_driver *phydrv) { @@ -3555,12 +3548,9 @@ static int phy_setup_ports(struct phy_device *phydev) if (ret) return ret; =20 - /* Use generic SFP probing only if the driver didn't do so already */ - if (!phydev->sfp_bus) { - ret =3D phy_sfp_probe(phydev, &sfp_phydev_ops); - if (ret) - goto out; - } + ret =3D phy_sfp_probe(phydev); + if (ret) + goto out; =20 if (phydev->n_ports < phydev->max_n_ports) { ret =3D phy_default_setup_single_port(phydev); diff --git a/include/linux/phy.h b/include/linux/phy.h index 329603c802d1..779187912e16 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -1829,12 +1829,6 @@ int phy_suspend(struct phy_device *phydev); int phy_resume(struct phy_device *phydev); int __phy_resume(struct phy_device *phydev); int phy_loopback(struct phy_device *phydev, bool enable, int speed); -int phy_sfp_connect_phy(void *upstream, struct phy_device *phy); -void phy_sfp_disconnect_phy(void *upstream, struct phy_device *phy); -void phy_sfp_attach(void *upstream, struct sfp_bus *bus); -void phy_sfp_detach(void *upstream, struct sfp_bus *bus); -int phy_sfp_probe(struct phy_device *phydev, - const struct sfp_upstream_ops *ops); struct phy_device *phy_attach(struct net_device *dev, const char *bus_id, phy_interface_t interface); struct phy_device *phy_find_first(struct mii_bus *bus); --=20 2.49.0 From nobody Mon Oct 6 20:59:30 2025 Received: from relay9-d.mail.gandi.net (relay9-d.mail.gandi.net [217.70.183.199]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 59A762566DF; Thu, 17 Jul 2025 07:30:48 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=217.70.183.199 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1752737450; cv=none; b=nBnc43zT0EXy7Wjri3z8dvUiUxpT8tK+NRUS7GCVZdO9SKoUx7JApXUcKQBVawy6d4gAjSygb0+vDkcHZDGH4mW9HRLCecxgB/blHxv0oPlchLukJ1CHnTG2ToUo+OZBidGx58xr9xnnwKbK93oF4/7mU3xTZyniISffWwdagrQ= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1752737450; c=relaxed/simple; bh=bbOFp03tlhHvVgaowSsW3U8/N13pqOkl0pz2XLSApzE=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=Ew+ETYxXpRRTSBsHdvlzA0Wzd4rdhheC7qFK49A+0/3reUJRdEYyfQ1g5j1q1mNiH+r58u1dPv1CyN74p7g3/ulvFZWesDq9H2cXrfbyFI7kYVhZvuyr7nxF01t8FBWi2gdbjkQIq6D8pP4azvnmUsIB6mhJKTE/Xfh+uHMps3k= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com; spf=pass smtp.mailfrom=bootlin.com; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b=c8xvZPl4; arc=none smtp.client-ip=217.70.183.199 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=bootlin.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b="c8xvZPl4" Received: by mail.gandi.net (Postfix) with ESMTPSA id 653B4443EF; Thu, 17 Jul 2025 07:30:45 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1752737446; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=ZvhogsV6u0eq8NEZjjZYMPSknEEGOZefTf8HyT/B9sQ=; b=c8xvZPl4Av0fCNMCTUfxf0TpayEgX8x+i+IacCh8mhsnYk3jNQ6hJvlor9KiL4qjc8XeKu KNfq8olTWngl3uDiDnGoRTFGSIFTqrh5ZGOkY0L7pZJoPSACnfZ4VJs0ZHO1NN9wkhQ2Yv hnhO1zopDBVuA8Uqa8irHjZR3rEym/bAypYlLreOJinh/0zJFVGrvofaOJF5qjCc5mwypI IUqDM7iJQhvKcXIx7iA3OaklD/d5E1p83zeT8sNGJlQrPU8hEyB1uif1mMHjv0Vkj+7k8a KtSWLsSBLuRhkQrkjUG7X713huzt+SbQjhjN1M7V4BIWDKnWTG6S/r/HXXaISA== From: Maxime Chevallier To: davem@davemloft.net Cc: Maxime Chevallier , netdev@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, thomas.petazzoni@bootlin.com, Andrew Lunn , Jakub Kicinski , Eric Dumazet , Paolo Abeni , Russell King , linux-arm-kernel@lists.infradead.org, Christophe Leroy , Herve Codina , Florian Fainelli , Heiner Kallweit , Vladimir Oltean , =?UTF-8?q?K=C3=B6ry=20Maincent?= , =?UTF-8?q?Marek=20Beh=C3=BAn?= , Oleksij Rempel , =?UTF-8?q?Nicol=C3=B2=20Veronese?= , Simon Horman , mwojtas@chromium.org, Antoine Tenart , devicetree@vger.kernel.org, Conor Dooley , Krzysztof Kozlowski , Rob Herring , Romain Gantois , Daniel Golle , Dimitri Fedrau Subject: [PATCH net-next v9 14/15] net: phy: dp83822: Add SFP support through the phy_port interface Date: Thu, 17 Jul 2025 09:30:18 +0200 Message-ID: <20250717073020.154010-15-maxime.chevallier@bootlin.com> X-Mailer: git-send-email 2.49.0 In-Reply-To: <20250717073020.154010-1-maxime.chevallier@bootlin.com> References: <20250717073020.154010-1-maxime.chevallier@bootlin.com> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable X-GND-State: clean X-GND-Score: -100 X-GND-Cause: gggruggvucftvghtrhhoucdtuddrgeeffedrtdefgdehleellecutefuodetggdotefrodftvfcurfhrohhfihhlvgemucfitefpfffkpdcuggftfghnshhusghstghrihgsvgenuceurghilhhouhhtmecufedtudenucesvcftvggtihhpihgvnhhtshculddquddttddmnecujfgurhephffvvefufffkofgjfhgggfestdekredtredttdenucfhrhhomhepofgrgihimhgvucevhhgvvhgrlhhlihgvrhcuoehmrgigihhmvgdrtghhvghvrghllhhivghrsegsohhothhlihhnrdgtohhmqeenucggtffrrghtthgvrhhnpeevgedtffelffelveeuleelgfejfeevvdejhfehgeefgfffvdefteegvedutefftdenucfkphepvdgrtddumegtsgduleemkegugeehmeegledttdemieehieekmedvlegsudemlegvfhehmegvkegtjeenucevlhhushhtvghrufhiiigvpeelnecurfgrrhgrmhepihhnvghtpedvrgdtudemtggsudelmeekugegheemgeeltddtmeeiheeikeemvdelsgdumeelvghfheemvgektgejpdhhvghlohepfhgvughorhgrrdhhohhmvgdpmhgrihhlfhhrohhmpehmrgigihhmvgdrtghhvghvrghllhhivghrsegsohhothhlihhnrdgtohhmpdhnsggprhgtphhtthhopeefuddprhgtphhtthhopegurghvvghmsegurghvvghmlhhofhhtrdhnvghtpdhrtghpthhtohepmhgrgihimhgvrdgthhgvvhgrlhhlihgvrhessghoohhtlhhinhdrtghomhdprhgtphhtthhopehnvghtuggvvhesvhhgvghrrdhkv ghrnhgvlhdrohhrghdprhgtphhtthhopehlihhnuhigqdhkvghrnhgvlhesvhhgvghrrdhkvghrnhgvlhdrohhrghdprhgtphhtthhopehlihhnuhigqdgrrhhmqdhmshhmsehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtohepthhhohhmrghsrdhpvghtrgiiiihonhhisegsohhothhlihhnrdgtohhmpdhrtghpthhtoheprghnughrvgifsehluhhnnhdrtghhpdhrtghpthhtohepkhhusggrsehkvghrnhgvlhdrohhrgh X-GND-Sasl: maxime.chevallier@bootlin.com Content-Type: text/plain; charset="utf-8" The DP83822 can support 100BaseFX. This mode was only accessible through custom DT properties, but there also exist SFP modules that support these modes. As this only requires setting the relevant supported interface in the driver, expose the port capability with the new phy_port API, allowing SFP support. Signed-off-by: Maxime Chevallier Reviewed-by: Christophe Leroy --- drivers/net/phy/dp83822.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/net/phy/dp83822.c b/drivers/net/phy/dp83822.c index 2657be2e9034..aa2c0085a900 100644 --- a/drivers/net/phy/dp83822.c +++ b/drivers/net/phy/dp83822.c @@ -979,6 +979,13 @@ static int dp83822_attach_port(struct phy_device *phyd= ev, struct phy_port *port) } } =20 + /* If attached from SFP, is_mii is set, but not the mediums. */ + if (port->is_mii) + dp83822->fx_enabled =3D true; + + if (dp83822->fx_enabled) + __set_bit(PHY_INTERFACE_MODE_100BASEX, port->interfaces); + return 0; } =20 --=20 2.49.0 From nobody Mon Oct 6 20:59:30 2025 Received: from relay9-d.mail.gandi.net (relay9-d.mail.gandi.net [217.70.183.199]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 99C642566F7; Thu, 17 Jul 2025 07:30:49 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=217.70.183.199 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1752737451; cv=none; b=id5lzqNbUF0ZVX+g5GWTeScNthV0Os4xsW7g3L8LyH9yYWhXiD6FGxlFKtG2kRMhG9jfc7PNTlz1hAwIqJJLd25slPcxCjRUhUgK31oil4svFaHwnVLD2M4NOAq7/Nk6qUH7zphyOTaImyluRhwKSAG1DH1PZM3twnwCd6x9tbc= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1752737451; c=relaxed/simple; bh=YJgsi6OlL2YRfH8JYDvAlZylUIR9ruyUz1cJEOmxOjQ=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=dXYLTSLqvJ8Zwh7raEfnDa5T8X5JgVohYi3Z4r3kGe0UuLVBTu5qdooJeLMcKxDjKFhZG4aMrI3gIauBFiOTmEXpU4J48GcaagvU/YNW4ApFrIjlJem+HFFTldZj9VIqTPbk+fTMWx+fRfMm1MSSefmIhKQ9wyBV14TPL6ga7Qw= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com; spf=pass smtp.mailfrom=bootlin.com; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b=Y8U1vxSq; arc=none smtp.client-ip=217.70.183.199 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=bootlin.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b="Y8U1vxSq" Received: by mail.gandi.net (Postfix) with ESMTPSA id D10D9443E8; Thu, 17 Jul 2025 07:30:46 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1752737448; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=4jTDyoISAKqJ6yoBRmBxJGabYsMp9DWXVs7dHeIYUcU=; b=Y8U1vxSqPs0StEXualMiHptg9f+IeS2axb8oxhi7bMllkCU9xYeY52GFLRt1C7Lw2Ft7bN rXCT09IMTzTSmChU9BZJj9mgwjSxXYu/GwSud6o5T0Y94lOTYvlFm8063m1cKGHbSkRiHA y54QAV1ixQX2rlClfhWPdrwEs0fydomDWgZqj3aGg/RwSAgSoxvcgPdhyGKxuGAv7DCeFz g4vD52nV0Rnw25zfg+xxnUwU24IlClMYnTHueJ2y0lsEqEH7jWVNMNV4kVb7W/EiVlKZeP nV7S2rFrUmepl3v6qmyTqcB/pgHLnms1MBIi1ouP3nnanwKlsgCVWtclqJQbbA== From: Maxime Chevallier To: davem@davemloft.net Cc: Maxime Chevallier , netdev@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, thomas.petazzoni@bootlin.com, Andrew Lunn , Jakub Kicinski , Eric Dumazet , Paolo Abeni , Russell King , linux-arm-kernel@lists.infradead.org, Christophe Leroy , Herve Codina , Florian Fainelli , Heiner Kallweit , Vladimir Oltean , =?UTF-8?q?K=C3=B6ry=20Maincent?= , =?UTF-8?q?Marek=20Beh=C3=BAn?= , Oleksij Rempel , =?UTF-8?q?Nicol=C3=B2=20Veronese?= , Simon Horman , mwojtas@chromium.org, Antoine Tenart , devicetree@vger.kernel.org, Conor Dooley , Krzysztof Kozlowski , Rob Herring , Romain Gantois , Daniel Golle , Dimitri Fedrau Subject: [PATCH net-next v9 15/15] Documentation: networking: Document the phy_port infrastructure Date: Thu, 17 Jul 2025 09:30:19 +0200 Message-ID: <20250717073020.154010-16-maxime.chevallier@bootlin.com> X-Mailer: git-send-email 2.49.0 In-Reply-To: <20250717073020.154010-1-maxime.chevallier@bootlin.com> References: <20250717073020.154010-1-maxime.chevallier@bootlin.com> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable X-GND-State: clean X-GND-Score: -100 X-GND-Cause: gggruggvucftvghtrhhoucdtuddrgeeffedrtdefgdehleellecutefuodetggdotefrodftvfcurfhrohhfihhlvgemucfitefpfffkpdcuggftfghnshhusghstghrihgsvgenuceurghilhhouhhtmecufedtudenucesvcftvggtihhpihgvnhhtshculddquddttddmnecujfgurhephffvvefufffkofgjfhgggfestdekredtredttdenucfhrhhomhepofgrgihimhgvucevhhgvvhgrlhhlihgvrhcuoehmrgigihhmvgdrtghhvghvrghllhhivghrsegsohhothhlihhnrdgtohhmqeenucggtffrrghtthgvrhhnpeevgedtffelffelveeuleelgfejfeevvdejhfehgeefgfffvdefteegvedutefftdenucfkphepvdgrtddumegtsgduleemkegugeehmeegledttdemieehieekmedvlegsudemlegvfhehmegvkegtjeenucevlhhushhtvghrufhiiigvpedufeenucfrrghrrghmpehinhgvthepvdgrtddumegtsgduleemkegugeehmeegledttdemieehieekmedvlegsudemlegvfhehmegvkegtjedphhgvlhhopehfvgguohhrrgdrhhhomhgvpdhmrghilhhfrhhomhepmhgrgihimhgvrdgthhgvvhgrlhhlihgvrhessghoohhtlhhinhdrtghomhdpnhgspghrtghpthhtohepfedupdhrtghpthhtohepuggrvhgvmhesuggrvhgvmhhlohhfthdrnhgvthdprhgtphhtthhopehmrgigihhmvgdrtghhvghvrghllhhivghrsegsohhothhlihhnrdgtohhmpdhrtghpthhtohepnhgvthguvghvsehvghgvrhdrk hgvrhhnvghlrdhorhhgpdhrtghpthhtoheplhhinhhugidqkhgvrhhnvghlsehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtoheplhhinhhugidqrghrmhdqmhhsmhesvhhgvghrrdhkvghrnhgvlhdrohhrghdprhgtphhtthhopehthhhomhgrshdrphgvthgriiiiohhnihessghoohhtlhhinhdrtghomhdprhgtphhtthhopegrnhgurhgvfieslhhunhhnrdgthhdprhgtphhtthhopehkuhgsrgeskhgvrhhnvghlrdhorhhg X-GND-Sasl: maxime.chevallier@bootlin.com Content-Type: text/plain; charset="utf-8" This documentation aims at describing the main goal of the phy_port infrastructure. Signed-off-by: Maxime Chevallier Reviewed-by: Christophe Leroy --- Documentation/networking/index.rst | 1 + Documentation/networking/phy-port.rst | 111 ++++++++++++++++++++++++++ MAINTAINERS | 1 + 3 files changed, 113 insertions(+) create mode 100644 Documentation/networking/phy-port.rst diff --git a/Documentation/networking/index.rst b/Documentation/networking/= index.rst index ac90b82f3ce9..f60acc06e3f7 100644 --- a/Documentation/networking/index.rst +++ b/Documentation/networking/index.rst @@ -96,6 +96,7 @@ Contents: packet_mmap phonet phy-link-topology + phy-port pktgen plip ppp_generic diff --git a/Documentation/networking/phy-port.rst b/Documentation/networki= ng/phy-port.rst new file mode 100644 index 000000000000..6d9d46ebe438 --- /dev/null +++ b/Documentation/networking/phy-port.rst @@ -0,0 +1,111 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. _phy_port: + +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D +Ethernet ports +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D + +This document is a basic description of the phy_port infrastructure, +introduced to represent physical interfaces of Ethernet devices. + +Without phy_port, we already have quite a lot of information about what the +media-facing interface of a NIC can do and looks like, through the +:c:type:`struct ethtool_link_ksettings ` attribute= s, +which includes : + + - What the NIC can do through the :c:member:`supported` field + - What the Link Partner advertises through :c:member:`lp_advertising` + - Which features we're advertising through :c:member:`advertising` + +We also have info about the number of lanes and the PORT type. These setti= ngs +are built by aggregating together information reported by various devices = that +are sitting on the link : + + - The NIC itself, through the :c:member:`get_link_ksettings` callback + - Precise information from the MAC and PCS by using phylink in the MAC d= river + - Information reported by the PHY device + - Information reported by an SFP module (which can itself include a PHY) + +This model however starts showing its limitations when we consider devices= that +have more than one media interface. In such a case, only information about= the +actively used interface is reported, and it's not possible to know what the +other interfaces can do. In fact, we have very few information about wheth= er or +not there are any other media interfaces. + +The goal of the phy_port representation is to provide a way of representin= g a +physical interface of a NIC, regardless of what is driving the port (NIC t= hrough +a firmware, SFP module, Ethernet PHY). + +Multi-port interfaces examples +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D + +Several cases of multi-interface NICs have been observed so far : + +Internal MII Mux:: + + +------------------+ + | SoC | + | +-----+ | +-----+ + | +-----+ | |-------------| PHY | + | | MAC |--| Mux | | +-----+ +-----+ + | +-----+ | |-----| SFP | + | +-----+ | +-----+ + +------------------+ + +Internal Mux with internal PHY:: + + +------------------------+ + | SoC | + | +-----+ +-----+ + | +-----+ | |-| PHY | + | | MAC |--| Mux | +-----+ +-----+ + | +-----+ | |-----------| SFP | + | +-----+ | +-----+ + +------------------------+ + +External Mux:: + + +---------+ + | SoC | +-----+ +-----+ + | | | |--| PHY | + | +-----+ | | | +-----+ + | | MAC |----| Mux | +-----+ + | +-----+ | | |--| PHY | + | | +-----+ +-----+ + | | | + | GPIO-------+ + +---------+ + +Double-port PHY:: + + +---------+ + | SoC | +-----+ + | | | |--- RJ45 + | +-----+ | | | + | | MAC |---| PHY | +-----+ + | +-----+ | | |---| SFP | + +---------+ +-----+ +-----+ + +phy_port aims at providing a path to support all the above topologies, by +representing the media interfaces in a way that's agnostic to what's drivi= ng +the interface. the struct phy_port object has its own set of callback ops,= and +will eventually be able to report its own ksettings:: + + _____ +------+ + ( )-----| Port | + +-----+ ( ) +------+ + | MAC |--( ??? ) + +-----+ ( ) +------+ + (_____)-----| Port | + +------+ + +Next steps +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D + +As of writing this documentation, only ports controlled by PHY devices are +supported. The next steps will be to add the Netlink API to expose these +to userspace and add support for raw ports (controlled by some firmware, a= nd directly +managed by the NIC driver). + +Another parallel task is the introduction of a MII muxing framework to all= ow the +control of non-PHY driver multi-port setups. diff --git a/MAINTAINERS b/MAINTAINERS index 2317e420c311..8fcb43cce415 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8965,6 +8965,7 @@ F: Documentation/devicetree/bindings/net/ethernet-con= nector.yaml F: Documentation/devicetree/bindings/net/ethernet-phy.yaml F: Documentation/devicetree/bindings/net/mdio* F: Documentation/devicetree/bindings/net/qca,ar803x.yaml +F: Documentation/networking/phy-port.rst F: Documentation/networking/phy.rst F: drivers/net/mdio/ F: drivers/net/mdio/acpi_mdio.c --=20 2.49.0