From nobody Mon Dec 15 01:49:03 2025 Received: from out-182.mta0.migadu.com (out-182.mta0.migadu.com [91.218.175.182]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 9247B1EB1B4 for ; Fri, 23 May 2025 20:34:30 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=91.218.175.182 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1748032472; cv=none; b=IKkKm5kFq1caqjqPyF3DHTH+88mWx1OQhkOuxfsc5BywyEYk0BFopv8+xdExI3q+m8FKLZA1MkbjzPD1dX3u30eDJcS1M7uhkA+F73wsMfWSs+yRT2paEtzJYA05Zp107kadbyRDW5dWgOjs2rbkRiwcHyOAHfb+CJZ9lztEZPQ= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1748032472; c=relaxed/simple; bh=4Rk4PcZp/P0dgRokTbY66gQ53B57GAnzFe0P29JFxrQ=; h=From:To:Cc:Subject:Date:Message-Id:In-Reply-To:References: MIME-Version; b=qLe4Tw9l9s/moFeg5CgzKF7HdJBoBcULdTgp/6PriMRa1txPHbL5ObTW4UximI09WEygiKdEpM79wFnVAUs6OnGa10Q5FV/iL+Is4KrkVJxSdXPR2z3G799Pq6P8ema/6MK48843f+KrmDlveo1f+fXS/E/Ni5/Q8uXwMJUsNKs= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linux.dev; spf=pass smtp.mailfrom=linux.dev; dkim=pass (1024-bit key) header.d=linux.dev header.i=@linux.dev header.b=Hzw8OExh; arc=none smtp.client-ip=91.218.175.182 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linux.dev Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=linux.dev Authentication-Results: smtp.subspace.kernel.org; dkim=pass (1024-bit key) header.d=linux.dev header.i=@linux.dev header.b="Hzw8OExh" X-Report-Abuse: Please report any abuse attempt to abuse@migadu.com and include these headers. DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linux.dev; s=key1; t=1748032468; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=nOaKt+XhutGsACo0AIeTjd+wJVp9zlX2M1zDj3epVuo=; b=Hzw8OExhmHWk66Pj2fOfr00QQkFlHlYm1SCg5RG1PRgf/NtI1wtQl1BI8xnniyaNgczlPT NHdnMHKPbSjvIOkLN9J3zzMl//Ao8B5CVmpB6LjqLOc/1oEmCNmAd3rORZGgTaSn1F2Oyx K+KaNT/IFR1vJbniBT53nnem957ET+o= From: Sean Anderson To: netdev@vger.kernel.org, Andrew Lunn , "David S . Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni , Russell King Cc: Lei Wei , Heiner Kallweit , Christian Marangi , Kory Maincent , Simon Horman , Daniel Golle , Vineeth Karumanchi , linux-kernel@vger.kernel.org, Sean Anderson , Rob Herring , Conor Dooley , Krzysztof Kozlowski , Michal Simek , Radhey Shyam Pandey , Robert Hancock , devicetree@vger.kernel.org Subject: [net-next PATCH v5 01/10] dt-bindings: net: Add Xilinx PCS Date: Fri, 23 May 2025 16:33:30 -0400 Message-Id: <20250523203339.1993685-2-sean.anderson@linux.dev> In-Reply-To: <20250523203339.1993685-1-sean.anderson@linux.dev> References: <20250523203339.1993685-1-sean.anderson@linux.dev> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable X-Migadu-Flow: FLOW_OUT Content-Type: text/plain; charset="utf-8" Add a binding for the Xilinx 1G/2.5G Ethernet PCS/PMA or SGMII LogiCORE IP. This device is a soft device typically used to adapt between GMII and SGMII or 1000BASE-X (possbilty in combination with a serdes). pcs-modes reflects the modes available with the as configured when the device is synthesized. Multiple modes may be specified if dynamic reconfiguration is supported. One PCS may contain "shared logic in core" which can be connected to other PCSs with "shared logic in example design." This primarily refers to clocking resources, allowing a reference clock to be shared by a bank of PCSs. To support this, if #clock-cells is defined then the PCS will register itself as a clock provider for other PCSs. Signed-off-by: Sean Anderson Reviewed-by: Rob Herring (Arm) --- (no changes since v3) Changes in v3: - Add '>' modifier for paragraph to description - Edit description to reference clocks instead of resets Changes in v2: - Change base compatible to just xlnx,pcs - Drop #clock-cells description - Move #clock-cells after compatible - Remove second example - Rename pcs-modes to xlnx,pcs-modes - Reword commit message .../devicetree/bindings/net/xilinx,pcs.yaml | 114 ++++++++++++++++++ 1 file changed, 114 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/xilinx,pcs.yaml diff --git a/Documentation/devicetree/bindings/net/xilinx,pcs.yaml b/Docume= ntation/devicetree/bindings/net/xilinx,pcs.yaml new file mode 100644 index 000000000000..11bbae6936eb --- /dev/null +++ b/Documentation/devicetree/bindings/net/xilinx,pcs.yaml @@ -0,0 +1,114 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/xilinx,pcs.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx 1G/2.5G Ethernet PCS/PMA or SGMII LogiCORE IP + +maintainers: + - Sean Anderson + +description: > + This is a soft device which implements the PCS and (depending on + configuration) PMA layers of an IEEE Ethernet PHY. On the MAC side, it + implements GMII. It may have an attached SERDES (internal or external), = or + may directly use LVDS IO resources. Depending on the configuration, it m= ay + implement 1000BASE-X, SGMII, 2500BASE-X, or 2.5G SGMII. + + This device has a notion of "shared logic" such as reset and clocking + resources which must be shared between multiple PCSs using the same I/O + banks. Each PCS can be configured to have the shared logic in the "core" + (instantiated internally and made available to other PCSs) or in the "ex= ample + design" (provided by another PCS). PCSs with shared logic in the core pr= ovide + a clock for other PCSs in the same bank. + +properties: + compatible: + items: + - const: xlnx,pcs-16.2 + - const: xlnx,pcs + + reg: + maxItems: 1 + + "#clock-cells": + const: 0 + + clocks: + items: + - description: + The reference clock for the PCS. Depending on your setup, this m= ay be + the gtrefclk, refclk, clk125m signal, or clocks from another PCS. + + clock-names: + const: refclk + + done-gpios: + maxItems: 1 + description: + GPIO connected to the reset-done output, if present. + + interrupts: + items: + - description: + The an_interrupt autonegotiation-complete interrupt. + + interrupt-names: + const: an + + xlnx,pcs-modes: + description: + The interfaces that the PCS supports. Multiple interfaces may be + specified if dynamic reconfiguration is enabled. + oneOf: + - const: sgmii + - const: 1000base-x + - const: 2500base-x + - items: + - const: sgmii + - const: 1000base-x + + reset-gpios: + maxItems: 1 + description: + GPIO connected to the reset input. + +required: + - compatible + - reg + - xlnx,pcs-modes + +additionalProperties: false + +examples: + - | + #include + #include + #include + + mdio { + #address-cells =3D <1>; + #size-cells =3D <0>; + + pcs0: ethernet-pcs@0 { + compatible =3D "xlnx,pcs-16.2", "xlnx,pcs"; + reg =3D <0>; + #clock-cells =3D <0>; + clocks =3D <&si570>; + clock-names =3D "refclk"; + interrupts-extended =3D <&gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names =3D "an"; + reset-gpios =3D <&gpio 5 GPIO_ACTIVE_HIGH>; + done-gpios =3D <&gpio 6 GPIO_ACTIVE_HIGH>; + xlnx,pcs-modes =3D "sgmii", "1000base-x"; + }; + + pcs1: ethernet-pcs@1 { + compatible =3D "xlnx,pcs-16.2", "xlnx,pcs"; + reg =3D <1>; + xlnx,pcs-modes =3D "sgmii"; + clocks =3D <&pcs0>; + clock-names =3D "refclk"; + }; + }; --=20 2.35.1.1320.gc452695387.dirty From nobody Mon Dec 15 01:49:03 2025 Received: from out-170.mta0.migadu.com (out-170.mta0.migadu.com [91.218.175.170]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 7733C201261; Fri, 23 May 2025 20:34:32 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=91.218.175.170 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1748032475; cv=none; b=fpYTh19uGX/iTjHztZB10og6b6WGXdr4yavYIczYz3pT9ToN1ikYJ60V5SK7gDP3WP1iNlnBD+CSygZTG2P8r1T2LpBaWAkURuGO5iVEIWP9HOgIBd8epuebrIf/2nCywp2f4q8KUlyCWSEt7HK7jQ3uYlvxu7H6wEZJYK226gk= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1748032475; c=relaxed/simple; bh=xTosKj+oc4pxZQFsq5uBqdCJFNLIXGzgaOtXQPaqVrM=; h=From:To:Cc:Subject:Date:Message-Id:In-Reply-To:References: MIME-Version; b=mIYGKTD+rc8SIJfbLAICk9c6ezuab5KroQanwN29rCRkQdWmI3u5Bjgx1rp7DXVNlN6UGWJP38zlW1ql9cd0fqNdyEk2y+hWWeUZu7Jvo6rCinrHZJDemhKi71dSGB3ZUEOI/c2M3vueBv8zbTHLHPFsnH34tOHKmAHJ3Khtmo4= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linux.dev; spf=pass smtp.mailfrom=linux.dev; dkim=pass (1024-bit key) header.d=linux.dev header.i=@linux.dev header.b=rocBAhpw; arc=none smtp.client-ip=91.218.175.170 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linux.dev Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=linux.dev Authentication-Results: smtp.subspace.kernel.org; dkim=pass (1024-bit key) header.d=linux.dev header.i=@linux.dev header.b="rocBAhpw" X-Report-Abuse: Please report any abuse attempt to abuse@migadu.com and include these headers. DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linux.dev; s=key1; t=1748032470; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=prtaTpemIaDZLHDoykMBFdPkVyFzlH8zW8XHt+HcAds=; b=rocBAhpwrQ/gKQq9nAOvxHsdpyEDXKeG+56+PU+DiYbcnoUSVwJGNgHPalH50eOHMpoV2I JJ32nZgK3Z7Y6v/hEAm6i4caBFtxskqFYvXHhvHhhsSF39gdOdchh85h4geC0IkZqOP+en +66Wh6wFXcx0FIiK0fSBXxhil0Y5TI0= From: Sean Anderson To: netdev@vger.kernel.org, Andrew Lunn , "David S . Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni , Russell King Cc: Lei Wei , Heiner Kallweit , Christian Marangi , Kory Maincent , Simon Horman , Daniel Golle , Vineeth Karumanchi , linux-kernel@vger.kernel.org, Sean Anderson Subject: [net-next PATCH v5 02/10] net: phylink: Support setting PCS link change callbacks Date: Fri, 23 May 2025 16:33:31 -0400 Message-Id: <20250523203339.1993685-3-sean.anderson@linux.dev> In-Reply-To: <20250523203339.1993685-1-sean.anderson@linux.dev> References: <20250523203339.1993685-1-sean.anderson@linux.dev> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable X-Migadu-Flow: FLOW_OUT Content-Type: text/plain; charset="utf-8" Support changing the link change callback, similar to how PHYs do it. This will allow the PCS wrapper to forward link changes to the wrapped PCS. Signed-off-by: Sean Anderson --- (no changes since v1) drivers/net/phy/phylink.c | 24 +++++++----------------- include/linux/phylink.h | 27 ++++++++++++++++++++++----- 2 files changed, 29 insertions(+), 22 deletions(-) diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c index 0faa3d97e06b..78989adac68f 100644 --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c @@ -1199,6 +1199,8 @@ static void phylink_pcs_neg_mode(struct phylink *pl, = struct phylink_pcs *pcs, pl->act_link_an_mode =3D mode; } =20 +static void pcs_change_callback(void *priv, bool up); + static void phylink_major_config(struct phylink *pl, bool restart, const struct phylink_link_state *state) { @@ -1254,10 +1256,10 @@ static void phylink_major_config(struct phylink *pl= , bool restart, phylink_pcs_disable(pl->pcs); =20 if (pl->pcs) - pl->pcs->phylink =3D NULL; - - pcs->phylink =3D pl; + pl->pcs->link_change_priv =3D NULL; =20 + pcs->link_change =3D pcs_change_callback; + pcs->link_change_priv =3D pl; pl->pcs =3D pcs; } =20 @@ -2327,25 +2329,13 @@ void phylink_mac_change(struct phylink *pl, bool up) } EXPORT_SYMBOL_GPL(phylink_mac_change); =20 -/** - * phylink_pcs_change() - notify phylink of a change to PCS link state - * @pcs: pointer to &struct phylink_pcs - * @up: indicates whether the link is currently up. - * - * The PCS driver should call this when the state of its link changes - * (e.g. link failure, new negotiation results, etc.) Note: it should - * not determine "up" by reading the BMSR. If in doubt about the link - * state at interrupt time, then pass true if pcs_get_state() returns - * the latched link-down state, otherwise pass false. - */ -void phylink_pcs_change(struct phylink_pcs *pcs, bool up) +static void pcs_change_callback(void *priv, bool up) { - struct phylink *pl =3D pcs->phylink; + struct phylink *pl =3D priv; =20 if (pl) phylink_link_changed(pl, up, "pcs"); } -EXPORT_SYMBOL_GPL(phylink_pcs_change); =20 static irqreturn_t phylink_link_handler(int irq, void *data) { diff --git a/include/linux/phylink.h b/include/linux/phylink.h index 30659b615fca..96cd3e7940fe 100644 --- a/include/linux/phylink.h +++ b/include/linux/phylink.h @@ -450,7 +450,8 @@ struct phylink_pcs_ops; * @supported_interfaces: describing which PHY_INTERFACE_MODE_xxx * are supported by this PCS. * @ops: a pointer to the &struct phylink_pcs_ops structure - * @phylink: pointer to &struct phylink_config + * @link_change: callback for when the link changes + * @link_change_priv: first argument to @link_change * @poll: poll the PCS for link changes * @rxc_always_on: The MAC driver requires the reference clock * to always be on. Standalone PCS drivers which @@ -460,13 +461,14 @@ struct phylink_pcs_ops; * This structure is designed to be embedded within the PCS private data, * and will be passed between phylink and the PCS. * - * The @phylink member is private to phylink and must not be touched by - * the PCS driver. + * @link_change, @link_change_priv, and @rxc_always_on will be filled in by + * phylink. */ struct phylink_pcs { DECLARE_PHY_INTERFACE_MASK(supported_interfaces); const struct phylink_pcs_ops *ops; - struct phylink *phylink; + void (*link_change)(void *priv, bool up); + void *link_change_priv; bool poll; bool rxc_always_on; }; @@ -708,7 +710,22 @@ int phylink_set_fixed_link(struct phylink *, const struct phylink_link_state *); =20 void phylink_mac_change(struct phylink *, bool up); -void phylink_pcs_change(struct phylink_pcs *, bool up); +/** + * phylink_pcs_change() - notify phylink of a change to PCS link state + * @pcs: pointer to &struct phylink_pcs + * @up: indicates whether the link is currently up. + * + * The PCS driver should call this when the state of its link changes + * (e.g. link failure, new negotiation results, etc.) Note: it should + * not determine "up" by reading the BMSR. If in doubt about the link + * state at interrupt time, then pass true if pcs_get_state() returns + * the latched link-down state, otherwise pass false. + */ +static inline void phylink_pcs_change(struct phylink_pcs *pcs, bool up) +{ + if (pcs->link_change) + pcs->link_change(pcs->link_change_priv, up); +} =20 int phylink_pcs_pre_init(struct phylink *pl, struct phylink_pcs *pcs); =20 --=20 2.35.1.1320.gc452695387.dirty From nobody Mon Dec 15 01:49:03 2025 Received: from out-170.mta0.migadu.com (out-170.mta0.migadu.com [91.218.175.170]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id D37B8202F79 for ; Fri, 23 May 2025 20:34:34 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=91.218.175.170 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1748032478; cv=none; b=k8XxZ7q9W76Z5GuaDyMLsftdxeJUG7hbq3FPEuk2oN//eDc22Uonm0q/zcItLbElyZoP577gDxThHIzm/ge5vgTERqx4lHg6plKam4DNY5F/xCjcTMdEtQ9oTeweIpUJxQKXD9oNsv+ScpgEnioof6p4vDLjkmKDdxVQI8OXHHA= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1748032478; c=relaxed/simple; bh=SqYTrDvGIKtKV1jaqoXsL8oeVBq3vvm0eznr+7yISOc=; h=From:To:Cc:Subject:Date:Message-Id:In-Reply-To:References: MIME-Version; b=mZnhdzHX0rH0VO/ajtYKDUoDMgwagU8HK2uOc08YIfHLU9/QaX7/4CCpWTr/+gpmzW+TUSLmDMGW1AUXNi3h74UyOFqhyovFoDrQt3nrZeAybndUVVM4cuOKvHEIBZh4IWNbdjgFy7yCSK8RXlnxJxMDut+1SQualK1lf0j4fY4= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linux.dev; spf=pass smtp.mailfrom=linux.dev; dkim=pass (1024-bit key) header.d=linux.dev header.i=@linux.dev header.b=EpnKM1kG; arc=none smtp.client-ip=91.218.175.170 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linux.dev Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=linux.dev Authentication-Results: smtp.subspace.kernel.org; dkim=pass (1024-bit key) header.d=linux.dev header.i=@linux.dev header.b="EpnKM1kG" X-Report-Abuse: Please report any abuse attempt to abuse@migadu.com and include these headers. DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linux.dev; s=key1; t=1748032473; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=qkGvjNiTNu2tspXEqAyZfxG912QtKaDd0tfYAUC6KYg=; b=EpnKM1kG8cKyvbihuZFPLcObrCoo3GylFnSpTfOxM57LzXSf3nFzHkeaUeLIdzWd5A0Y5Q 7UD48Ts+jl/RLkDAtt0d4l+CYp7jtO6E7KeQo/l1Go29b0Hf8KdmpP1KguWqK/lGecz4Ns +Uk1oEDrobdg/tiJlb9ZRqszyOvv7W4= From: Sean Anderson To: netdev@vger.kernel.org, Andrew Lunn , "David S . Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni , Russell King Cc: Lei Wei , Heiner Kallweit , Christian Marangi , Kory Maincent , Simon Horman , Daniel Golle , Vineeth Karumanchi , linux-kernel@vger.kernel.org, Sean Anderson , Jonathan Corbet , linux-doc@vger.kernel.org Subject: [net-next PATCH v5 03/10] net: pcs: Add subsystem Date: Fri, 23 May 2025 16:33:32 -0400 Message-Id: <20250523203339.1993685-4-sean.anderson@linux.dev> In-Reply-To: <20250523203339.1993685-1-sean.anderson@linux.dev> References: <20250523203339.1993685-1-sean.anderson@linux.dev> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable X-Migadu-Flow: FLOW_OUT Content-Type: text/plain; charset="utf-8" This adds support for getting PCS devices from the device tree. PCS drivers must first register with phylink_register_pcs. After that, MAC drivers may look up their PCS using phylink_get_pcs. We wrap registered PCSs in another PCS. This wrapper PCS is refcounted and can outlive the wrapped PCS (such as if the wrapped PCS's driver is unbound). The wrapper forwards all PCS callbacks to the wrapped PCS, first checking to make sure the wrapped PCS still exists. This design was inspired by Bartosz Golaszewski's talk at LPC [1]. One downside of this approach is that if a PCS provider gets rebound, the consumer must put the old PCS and re-get it. Typically this means rebinding the consumer as well. I don't consider this a major downside: - There is no guarantee that the PCS provider will support the same PHY interfaces as before. At the moment there is no way to handle this other than rebinding the consumer. - Unbinding a PCS can generally happen in three ways: - The entire MAC and PCS is on a removable bus and everything is getting unbound because the whole thing is being removed. In this case we do not need to worry about the PCS coming back without the MAC having been unbound. - The PCS is on an FPGA that is being reconfigured but the MAC is not. This is a legitimate (if uncommon) use case. However, given that such arrangements were not possible at all before this series I think this is an acceptible limitation (at least initially). - The user has manually rebound the PCS (directly or indirectly) through sysfs. In this case I think it is fine to require them to manually rebind the MACs as well. pcs_get_by_fwnode_compat is a bit hairy, but it's necessary for compatibility with existing drivers, which often attach to (devicetree) nodes directly. We use the devicetree changeset system instead of adding a (secondary) software node because mdio_bus_match calls of_driver_match_device to match devices, and that function only works on devicetree nodes. [1] https://lpc.events/event/17/contributions/1627/ Signed-off-by: Sean Anderson --- (no changes since v4) Changes in v4: - Adjust variable ordering in pcs_find_fwnode - Annotate pcs_wrapper.wrapped with __rcu - Fix PCS lookup functions missing ERR_PTR casts - Fix documentation for devm_pcs_register_full - Fix incorrect condition in pcs_post_config - Fix linking when PCS && !OF_DYNAMIC - Fix linking when PCS && OF_DYNAMIC && PHYLIB=3Dm - Reduce line lengths to under 80 characters - Remove unused dev parameter to pcs_put - Use a spinlock instead of a mutex to protect pcs_wrappers Changes in v3: - Remove support for #pcs-cells. Upon further investigation, the requested functionality can be accomplished by specifying the PCS's fwnode manually. Changes in v2: - Add fallbacks for pcs_get* and pcs_put - Add support for #pcs-cells - Remove outdated comment - Remove unused variable Documentation/networking/index.rst | 1 + Documentation/networking/kapi.rst | 4 + Documentation/networking/pcs.rst | 102 +++++ MAINTAINERS | 2 + drivers/net/pcs/Kconfig | 13 + drivers/net/pcs/Makefile | 2 + drivers/net/pcs/core.c | 686 +++++++++++++++++++++++++++++ include/linux/pcs.h | 205 +++++++++ 8 files changed, 1015 insertions(+) create mode 100644 Documentation/networking/pcs.rst create mode 100644 drivers/net/pcs/core.c create mode 100644 include/linux/pcs.h diff --git a/Documentation/networking/index.rst b/Documentation/networking/= index.rst index ac90b82f3ce9..ff0e5968850b 100644 --- a/Documentation/networking/index.rst +++ b/Documentation/networking/index.rst @@ -30,6 +30,7 @@ Contents: page_pool phy sfp-phylink + pcs alias bridge snmp_counter diff --git a/Documentation/networking/kapi.rst b/Documentation/networking/k= api.rst index 98682b9a13ee..7a48178649de 100644 --- a/Documentation/networking/kapi.rst +++ b/Documentation/networking/kapi.rst @@ -146,6 +146,10 @@ PHYLINK =20 .. kernel-doc:: include/linux/phylink.h :internal: + :no-identifiers: phylink_pcs phylink_pcs_ops pcs_validate pcs_inband_ca= ps + pcs_enable pcs_disable pcs_pre_config pcs_post_config pcs_get_state + pcs_config pcs_an_restart pcs_link_up pcs_disable_eee pcs_enable_eee + pcs_pre_init =20 .. kernel-doc:: drivers/net/phy/phylink.c =20 diff --git a/Documentation/networking/pcs.rst b/Documentation/networking/pc= s.rst new file mode 100644 index 000000000000..4b41ba884160 --- /dev/null +++ b/Documentation/networking/pcs.rst @@ -0,0 +1,102 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D +PCS Subsystem +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D + +The PCS (Physical Coding Sublayer) subsystem handles the registration and = lookup +of PCS devices. These devices contain the upper sublayers of the Ethernet +physical layer, generally handling framing, scrambling, and encoding tasks= . PCS +devices may also include PMA (Physical Medium Attachment) components. PCS +devices transfer data between the Link-layer MAC device, and the rest of t= he +physical layer, typically via a serdes. The output of the serdes may be +connected more-or-less directly to the medium when using fiber-optic or +backplane connections (1000BASE-SX, 1000BASE-KX, etc). It may also communi= cate +with a separate PHY (such as over SGMII) which handles the connection to t= he +medium (such as 1000BASE-T). + +Looking up PCS Devices +---------------------- + +There are generally two ways to look up a PCS device. If the PCS device is +internal to a larger device (such as a MAC or switch), and it does not sha= re an +implementation with an existing PCS, then it does not need to be registere= d with +the PCS subsystem. Instead, you can populate a :c:type:`phylink_pcs` +in your probe function. Otherwise, you must look up the PCS. + +If your device has a :c:type:`fwnode_handle`, you can add a PCS using the +``pcs-handle`` property:: + + ethernet-controller { + // ... + pcs-handle =3D <&pcs>; + pcs-handle-names =3D "internal"; + }; + +Then, during your probe function, you can get the PCS using :c:func:`pcs_g= et`:: + + mac->pcs =3D pcs_get(dev, "internal"); + if (IS_ERR(mac->pcs)) { + err =3D PTR_ERR(mac->pcs); + return dev_err_probe(dev, "Could not get PCS\n"); + } + +If your device doesn't have a :c:type:`fwnode_handle`, you can get the PCS +based on the providing device using :c:func:`pcs_get_by_dev`. Typically, y= ou +will create the device and bind your PCS driver to it before calling this +function. This allows reuse of an existing PCS driver. + +Once you are done using the PCS, you must call :c:func:`pcs_put`. + +Using PCS Devices +----------------- + +To select the PCS from a MAC driver, implement the ``mac_select_pcs`` call= back +of :c:type:`phylink_mac_ops`. In this example, the PCS is selected for SGM= II +and 1000BASE-X, and deselected for other interfaces:: + + static struct phylink_pcs *mac_select_pcs(struct phylink_config *confi= g, + phy_interface_t iface) + { + struct mac *mac =3D config_to_mac(config); + + switch (iface) { + case PHY_INTERFACE_MODE_SGMII: + case PHY_INTERFACE_MODE_1000BASEX: + return mac->pcs; + default: + return NULL; + } + } + +To do the same from a DSA driver, implement the ``phylink_mac_select_pcs`` +callback of :c:type:`dsa_switch_ops`. + +Writing PCS Drivers +------------------- + +To write a PCS driver, first implement :c:type:`phylink_pcs_ops`. Then, +register your PCS in your probe function using :c:func:`pcs_register`. If = you +need to provide multiple PCSs for the same device, then you can pass speci= fic +firmware nodes using :c:macro:`pcs_register_full`. + +You must call :c:func:`pcs_unregister` from your remove function. You can = avoid +this step by registering with :c:func:`devm_pcs_unregister`. + +API Reference +------------- + +.. kernel-doc:: include/linux/phylink.h + :identifiers: phylink_pcs phylink_pcs_ops pcs_validate pcs_inband_caps + pcs_enable pcs_disable pcs_pre_config pcs_post_config pcs_get_state + pcs_config pcs_an_restart pcs_link_up pcs_disable_eee pcs_enable_eee + pcs_pre_init + +.. kernel-doc:: include/linux/pcs.h + :internal: + +.. kernel-doc:: drivers/net/pcs/core.c + :export: + +.. kernel-doc:: drivers/net/pcs/core.c + :internal: diff --git a/MAINTAINERS b/MAINTAINERS index 4e31726aa8d0..f098406db6ff 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8789,6 +8789,7 @@ F: Documentation/ABI/testing/sysfs-class-net-phydev F: Documentation/devicetree/bindings/net/ethernet-phy.yaml F: Documentation/devicetree/bindings/net/mdio* F: Documentation/devicetree/bindings/net/qca,ar803x.yaml +F: Documentation/networking/pcs.rst F: Documentation/networking/phy.rst F: drivers/net/mdio/ F: drivers/net/mdio/acpi_mdio.c @@ -8802,6 +8803,7 @@ F: include/linux/linkmode.h F: include/linux/mdio/*.h F: include/linux/mii.h F: include/linux/of_net.h +F: include/linux/pcs.h F: include/linux/phy.h F: include/linux/phy_fixed.h F: include/linux/phy_link_topology.h diff --git a/drivers/net/pcs/Kconfig b/drivers/net/pcs/Kconfig index f6aa437473de..6d19625b696d 100644 --- a/drivers/net/pcs/Kconfig +++ b/drivers/net/pcs/Kconfig @@ -5,6 +5,19 @@ =20 menu "PCS device drivers" =20 +config PCS + bool "PCS subsystem" + select PHYLIB if OF_DYNAMIC + help + This provides common helper functions for registering and looking up + Physical Coding Sublayer (PCS) devices. PCS devices translate between + different interface types. In some use cases, they may either + translate between different types of Medium-Independent Interfaces + (MIIs), such as translating GMII to SGMII. This allows using a fast + serial interface to talk to the phy which translates the MII to the + Medium-Dependent Interface. Alternatively, they may translate a MII + directly to an MDI, such as translating GMII to 1000Base-X. + config PCS_XPCS tristate "Synopsys DesignWare Ethernet XPCS" select PHYLINK diff --git a/drivers/net/pcs/Makefile b/drivers/net/pcs/Makefile index 4f7920618b90..35e3324fc26e 100644 --- a/drivers/net/pcs/Makefile +++ b/drivers/net/pcs/Makefile @@ -1,6 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 # Makefile for Linux PCS drivers =20 +obj-$(CONFIG_PCS) +=3D core.o + pcs_xpcs-$(CONFIG_PCS_XPCS) :=3D pcs-xpcs.o pcs-xpcs-plat.o \ pcs-xpcs-nxp.o pcs-xpcs-wx.o =20 diff --git a/drivers/net/pcs/core.c b/drivers/net/pcs/core.c new file mode 100644 index 000000000000..133df15483f0 --- /dev/null +++ b/drivers/net/pcs/core.c @@ -0,0 +1,686 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2022-25 Sean Anderson + */ + +#define pr_fmt(fmt) "pcs-core: " fmt + +#include +#include +#include +#include +#include +#include +#include +#include + +static LIST_HEAD(pcs_wrappers); +/* Protects PCS (un)registration i.e. pcs_wrappers */ +static DEFINE_SPINLOCK(pcs_lock); +/* Protects pcs_wrapper.pcs from being unregistered while we are operating= on + * it. One SRCU is shared by all PCSs, so drivers may wait on other driver= s' + * PCSs. If this becomes a problem the SRCU can be made per-PCS. + */ +DEFINE_STATIC_SRCU(pcs_srcu); + +/** + * struct pcs_wrapper - Wrapper for a registered PCS + * @pcs: the wrapping PCS + * @refcnt: refcount for the wrapper + * @list: list head for pcs_wrappers + * @dev: the device associated with this PCS + * @fwnode: this PCS's firmware node; typically @dev.fwnode + * @wrapped: the backing PCS + */ +struct pcs_wrapper { + struct phylink_pcs pcs; + refcount_t refcnt; + struct list_head list; + struct device *dev; + struct fwnode_handle *fwnode; + struct phylink_pcs __rcu *wrapped; +}; + +static const struct phylink_pcs_ops pcs_ops; + +static struct pcs_wrapper *pcs_to_wrapper(struct phylink_pcs *pcs) +{ + WARN_ON(pcs->ops !=3D &pcs_ops); + return container_of(pcs, struct pcs_wrapper, pcs); +} + +static int pcs_validate(struct phylink_pcs *pcs, unsigned long *supported, + const struct phylink_link_state *state) +{ + struct pcs_wrapper *wrapper =3D pcs_to_wrapper(pcs); + struct phylink_pcs *wrapped; + int ret, idx; + + if (!wrapper) + return 0; + + idx =3D srcu_read_lock(&pcs_srcu); + + wrapped =3D srcu_dereference(wrapper->wrapped, &pcs_srcu); + if (wrapped) { + if (wrapped->ops->pcs_validate) + ret =3D wrapped->ops->pcs_validate(wrapped, supported, + state); + else + ret =3D 0; + } else { + ret =3D -ENODEV; + } + + srcu_read_unlock(&pcs_srcu, idx); + return ret; +} + +static unsigned int pcs_inband_caps(struct phylink_pcs *pcs, + phy_interface_t interface) +{ + struct pcs_wrapper *wrapper =3D pcs_to_wrapper(pcs); + struct phylink_pcs *wrapped; + int ret, idx; + + idx =3D srcu_read_lock(&pcs_srcu); + + wrapped =3D srcu_dereference(wrapper->wrapped, &pcs_srcu); + if (wrapped && wrapped->ops->pcs_inband_caps) + ret =3D wrapped->ops->pcs_inband_caps(wrapped, interface); + else + ret =3D 0; + + srcu_read_unlock(&pcs_srcu, idx); + return ret; +} + +static int pcs_enable(struct phylink_pcs *pcs) +{ + struct pcs_wrapper *wrapper =3D pcs_to_wrapper(pcs); + struct phylink_pcs *wrapped; + int ret, idx; + + if (!wrapper) + return 0; + + idx =3D srcu_read_lock(&pcs_srcu); + + wrapped =3D srcu_dereference(wrapper->wrapped, &pcs_srcu); + if (wrapped) { + if (wrapped->ops->pcs_enable) + ret =3D wrapped->ops->pcs_enable(wrapped); + else + ret =3D 0; + } else { + ret =3D -ENODEV; + } + + srcu_read_unlock(&pcs_srcu, idx); + return ret; +} + +static void pcs_disable(struct phylink_pcs *pcs) +{ + struct pcs_wrapper *wrapper =3D pcs_to_wrapper(pcs); + struct phylink_pcs *wrapped; + int idx; + + idx =3D srcu_read_lock(&pcs_srcu); + + wrapped =3D srcu_dereference(wrapper->wrapped, &pcs_srcu); + if (wrapped && wrapped->ops->pcs_disable) + wrapped->ops->pcs_disable(wrapped); + + srcu_read_unlock(&pcs_srcu, idx); +} + +static void pcs_get_state(struct phylink_pcs *pcs, unsigned int neg_mode, + struct phylink_link_state *state) +{ + struct pcs_wrapper *wrapper =3D pcs_to_wrapper(pcs); + struct phylink_pcs *wrapped; + int idx; + + idx =3D srcu_read_lock(&pcs_srcu); + + wrapped =3D srcu_dereference(wrapper->wrapped, &pcs_srcu); + if (wrapped) + wrapped->ops->pcs_get_state(wrapped, neg_mode, state); + else + state->link =3D 0; + + srcu_read_unlock(&pcs_srcu, idx); +} + +static void pcs_pre_config(struct phylink_pcs *pcs, + phy_interface_t interface) +{ + struct pcs_wrapper *wrapper =3D pcs_to_wrapper(pcs); + struct phylink_pcs *wrapped; + int idx; + + idx =3D srcu_read_lock(&pcs_srcu); + + wrapped =3D srcu_dereference(wrapper->wrapped, &pcs_srcu); + if (wrapped && wrapped->ops->pcs_pre_config) + wrapped->ops->pcs_pre_config(wrapped, interface); + + srcu_read_unlock(&pcs_srcu, idx); +} + +static int pcs_post_config(struct phylink_pcs *pcs, + phy_interface_t interface) +{ + struct pcs_wrapper *wrapper =3D pcs_to_wrapper(pcs); + struct phylink_pcs *wrapped; + int ret, idx; + + idx =3D srcu_read_lock(&pcs_srcu); + + wrapped =3D srcu_dereference(wrapper->wrapped, &pcs_srcu); + if (wrapped && wrapped->ops->pcs_post_config) + ret =3D wrapped->ops->pcs_post_config(wrapped, interface); + else + ret =3D 0; + + srcu_read_unlock(&pcs_srcu, idx); + return ret; +} + +static int pcs_config(struct phylink_pcs *pcs, unsigned int neg_mode, + phy_interface_t interface, + const unsigned long *advertising, + bool permit_pause_to_mac) +{ + struct pcs_wrapper *wrapper =3D pcs_to_wrapper(pcs); + struct phylink_pcs *wrapped; + int ret, idx; + + idx =3D srcu_read_lock(&pcs_srcu); + + wrapped =3D srcu_dereference(wrapper->wrapped, &pcs_srcu); + if (wrapped) + ret =3D wrapped->ops->pcs_config(wrapped, neg_mode, interface, + advertising, permit_pause_to_mac); + else + ret =3D -ENODEV; + + srcu_read_unlock(&pcs_srcu, idx); + return ret; +} + +static void pcs_an_restart(struct phylink_pcs *pcs) +{ + struct pcs_wrapper *wrapper =3D pcs_to_wrapper(pcs); + struct phylink_pcs *wrapped; + int idx; + + idx =3D srcu_read_lock(&pcs_srcu); + + wrapped =3D srcu_dereference(wrapper->wrapped, &pcs_srcu); + if (wrapped) + wrapped->ops->pcs_an_restart(wrapped); + + srcu_read_unlock(&pcs_srcu, idx); +} + +static void pcs_link_up(struct phylink_pcs *pcs, unsigned int neg_mode, + phy_interface_t interface, int speed, int duplex) +{ + struct pcs_wrapper *wrapper =3D pcs_to_wrapper(pcs); + struct phylink_pcs *wrapped; + int idx; + + idx =3D srcu_read_lock(&pcs_srcu); + + wrapped =3D srcu_dereference(wrapper->wrapped, &pcs_srcu); + if (wrapped && wrapped->ops->pcs_link_up) + wrapped->ops->pcs_link_up(wrapped, neg_mode, interface, speed, + duplex); + + srcu_read_unlock(&pcs_srcu, idx); +} + +static void pcs_disable_eee(struct phylink_pcs *pcs) +{ + struct pcs_wrapper *wrapper =3D pcs_to_wrapper(pcs); + struct phylink_pcs *wrapped; + int idx; + + idx =3D srcu_read_lock(&pcs_srcu); + + wrapped =3D srcu_dereference(wrapper->wrapped, &pcs_srcu); + if (wrapped && wrapped->ops->pcs_disable_eee) + wrapped->ops->pcs_disable_eee(wrapped); + + srcu_read_unlock(&pcs_srcu, idx); +} + +static void pcs_enable_eee(struct phylink_pcs *pcs) +{ + struct pcs_wrapper *wrapper =3D pcs_to_wrapper(pcs); + struct phylink_pcs *wrapped; + int idx; + + idx =3D srcu_read_lock(&pcs_srcu); + + wrapped =3D srcu_dereference(wrapper->wrapped, &pcs_srcu); + if (wrapped && wrapped->ops->pcs_enable_eee) + wrapped->ops->pcs_enable_eee(wrapped); + + srcu_read_unlock(&pcs_srcu, idx); +} + +static int pcs_pre_init(struct phylink_pcs *pcs) +{ + struct pcs_wrapper *wrapper =3D pcs_to_wrapper(pcs); + struct phylink_pcs *wrapped; + int ret, idx; + + idx =3D srcu_read_lock(&pcs_srcu); + + wrapped =3D srcu_dereference(wrapper->wrapped, &pcs_srcu); + if (wrapped) { + wrapped->rxc_always_on =3D pcs->rxc_always_on; + if (wrapped->ops->pcs_pre_init) + ret =3D wrapped->ops->pcs_pre_init(wrapped); + else + ret =3D 0; + } else { + ret =3D -ENODEV; + } + + srcu_read_unlock(&pcs_srcu, idx); + return ret; +} + +static const struct phylink_pcs_ops pcs_ops =3D { + .pcs_validate =3D pcs_validate, + .pcs_inband_caps =3D pcs_inband_caps, + .pcs_enable =3D pcs_enable, + .pcs_disable =3D pcs_disable, + .pcs_pre_config =3D pcs_pre_config, + .pcs_post_config =3D pcs_post_config, + .pcs_get_state =3D pcs_get_state, + .pcs_config =3D pcs_config, + .pcs_an_restart =3D pcs_an_restart, + .pcs_link_up =3D pcs_link_up, + .pcs_disable_eee =3D pcs_disable_eee, + .pcs_enable_eee =3D pcs_enable_eee, + .pcs_pre_init =3D pcs_pre_init, +}; + +static void pcs_change_callback(void *priv, bool up) +{ + struct pcs_wrapper *wrapper =3D priv; + + phylink_pcs_change(&wrapper->pcs, up); +} + +/** + * pcs_register_full() - register a new PCS + * @dev: The device requesting the PCS + * @fwnode: The PCS's firmware node; typically @dev.fwnode + * @pcs: The PCS to register + * + * Registers a new PCS which can be attached to a phylink. + * + * Return: 0 on success, or -errno on error + */ +int pcs_register_full(struct device *dev, struct fwnode_handle *fwnode, + struct phylink_pcs *pcs) +{ + struct pcs_wrapper *wrapper; + + if (!dev || !pcs->ops) + return -EINVAL; + + if (!pcs->ops->pcs_an_restart || !pcs->ops->pcs_config || + !pcs->ops->pcs_get_state) + return -EINVAL; + + wrapper =3D kzalloc(sizeof(*wrapper), GFP_KERNEL); + if (!wrapper) + return -ENOMEM; + + refcount_set(&wrapper->refcnt, 1); + INIT_LIST_HEAD(&wrapper->list); + wrapper->dev =3D get_device(dev); + wrapper->fwnode =3D fwnode_handle_get(fwnode); + RCU_INIT_POINTER(wrapper->wrapped, pcs); + + wrapper->pcs.ops =3D &pcs_ops; + wrapper->pcs.poll =3D pcs->poll; + bitmap_copy(wrapper->pcs.supported_interfaces, + pcs->supported_interfaces, PHY_INTERFACE_MODE_MAX); + + pcs->link_change =3D pcs_change_callback; + pcs->link_change_priv =3D wrapper; + + spin_lock(&pcs_lock); + list_add(&wrapper->list, &pcs_wrappers); + spin_unlock(&pcs_lock); + return 0; +} +EXPORT_SYMBOL_GPL(pcs_register_full); + +/** + * pcs_unregister() - unregister a PCS + * @pcs: a PCS previously registered with pcs_register() + */ +void pcs_unregister(struct phylink_pcs *pcs) +{ + struct pcs_wrapper *wrapper; + + spin_lock(&pcs_lock); + list_for_each_entry(wrapper, &pcs_wrappers, list) { + if (rcu_access_pointer(wrapper->wrapped) =3D=3D pcs) + goto found; + } + + spin_unlock(&pcs_lock); + WARN(1, "trying to unregister an already-unregistered PCS\n"); + return; + +found: + list_del(&wrapper->list); + spin_unlock(&pcs_lock); + + put_device(wrapper->dev); + fwnode_handle_put(wrapper->fwnode); + rcu_replace_pointer(wrapper->wrapped, NULL, true); + synchronize_srcu(&pcs_srcu); + + if (!wrapper->pcs.poll) + phylink_pcs_change(&wrapper->pcs, false); + if (refcount_dec_and_test(&wrapper->refcnt)) + kfree(wrapper); +} +EXPORT_SYMBOL_GPL(pcs_unregister); + +static void devm_pcs_unregister(void *pcs) +{ + pcs_unregister(pcs); +} + +/** + * devm_pcs_register_full - resource managed pcs_register() + * @dev: device that is registering this PCS + * @fwnode: The PCS's firmware node; typically @dev.fwnode + * @pcs: the PCS to register + * + * Managed pcs_register(). For PCSs registered by this function, + * pcs_unregister() is automatically called on driver detach. See + * pcs_register() for more information. + * + * Return: 0 on success, or -errno on failure + */ +int devm_pcs_register_full(struct device *dev, struct fwnode_handle *fwnod= e, + struct phylink_pcs *pcs) +{ + int ret; + + ret =3D pcs_register_full(dev, fwnode, pcs); + if (ret) + return ret; + + return devm_add_action_or_reset(dev, devm_pcs_unregister, pcs); +} +EXPORT_SYMBOL_GPL(devm_pcs_register_full); + +/** + * _pcs_get_tail() - Look up and request a PCS + * @dev: The device requesting the PCS + * @fwnode: The PCS's fwnode + * @pcs_dev: The PCS's device + * + * Search PCSs registered with pcs_register() for one with a matching + * fwnode or device. Either @fwnode or @pcs_dev may be %NULL if matching + * against a fwnode or device is not desired (respectively). + * + * Once a PCS is found, perform common operations necessary when getting a= PCS + * (increment reference counts, etc). + * + * You should probably call one of the pcs_get* functions instead of this = one. + * + * Return: A PCS, or an error pointer on failure. If both @fwnode and @pcs= _dev + * are %NULL, returns %NULL to allow easier chaining. + */ +struct phylink_pcs *_pcs_get_tail(struct device *dev, + const struct fwnode_handle *fwnode, + const struct device *pcs_dev) +{ + struct pcs_wrapper *wrapper; + + if (!fwnode && !pcs_dev) + return NULL; + + pr_debug("looking for %pfwf or %s %s...\n", fwnode, + pcs_dev ? dev_driver_string(pcs_dev) : "(null)", + pcs_dev ? dev_name(pcs_dev) : "(null)"); + + spin_lock(&pcs_lock); + list_for_each_entry(wrapper, &pcs_wrappers, list) { + if (pcs_dev && wrapper->dev =3D=3D pcs_dev) + goto found; + if (fwnode && wrapper->fwnode =3D=3D fwnode) + goto found; + } + spin_unlock(&pcs_lock); + pr_debug("...not found\n"); + return ERR_PTR(-EPROBE_DEFER); + +found: + refcount_inc(&wrapper->refcnt); + spin_unlock(&pcs_lock); + pr_debug("...found\n"); + return &wrapper->pcs; +} +EXPORT_SYMBOL_GPL(_pcs_get_tail); + +/** + * pcs_find_fwnode() - Find a PCS's fwnode + * @mac_node: The fwnode referencing the PCS + * @id: The name of the PCS to get. May be %NULL to get the first PCS. + * @fallback: An optional fallback property to use if pcs-handle is absent + * @optional: Whether the PCS is optional + * + * Find a PCS's fwnode, as referenced by @mac_node. This fwnode can later = be + * used with _pcs_get_tail() to get the actual PCS. ``pcs-handle-names`` is + * used to match @id, then the fwnode is found using ``pcs-handle``. + * + * This function is internal to the PCS subsystem from a consumer + * point-of-view. However, it may be used to implement fallbacks for legacy + * behavior in PCS providers. + * + * Return: %NULL if @optional is set and the PCS cannot be found. Otherwis= e, + * returns a PCS if found or an error pointer on failure. + */ +struct fwnode_handle *pcs_find_fwnode(const struct fwnode_handle *mac_node, + const char *id, const char *fallback, + bool optional) +{ + struct fwnode_handle *pcs_fwnode; + int index; + + if (!mac_node) + return optional ? NULL : ERR_PTR(-ENODEV); + + if (id) + index =3D fwnode_property_match_string(mac_node, + "pcs-handle-names", id); + else + index =3D 0; + + if (index < 0) { + if (optional && (index =3D=3D -EINVAL || index =3D=3D -ENODATA)) + return NULL; + return ERR_PTR(index); + } + + /* First try pcs-handle, and if that doesn't work try the fallback */ + pcs_fwnode =3D fwnode_find_reference(mac_node, "pcs-handle", index); + if (PTR_ERR(pcs_fwnode) =3D=3D -ENOENT && fallback) + pcs_fwnode =3D fwnode_find_reference(mac_node, fallback, index); + if (optional && !id && PTR_ERR(pcs_fwnode) =3D=3D -ENOENT) + return NULL; + return pcs_fwnode; +} +EXPORT_SYMBOL_GPL(pcs_find_fwnode); + +/** + * _pcs_get() - Get a PCS from a fwnode property + * @dev: The device to get a PCS for + * @fwnode: The fwnode to find the PCS with + * @id: The name of the PCS to get. May be %NULL to get the first PCS. + * @fallback: An optional fallback property to use if pcs-handle is absent + * @optional: Whether the PCS is optional + * + * Find a PCS referenced by @fwnode and return a reference to it. Every ca= ll + * to _pcs_get_by_fwnode() must be balanced with one to pcs_put(). + * + * Return: a PCS if found, %NULL if not, or an error pointer on failure + */ +struct phylink_pcs *_pcs_get(struct device *dev, struct fwnode_handle *fwn= ode, + const char *id, const char *fallback, + bool optional) +{ + struct fwnode_handle *pcs_fwnode; + struct phylink_pcs *pcs; + + pcs_fwnode =3D pcs_find_fwnode(fwnode, id, fallback, optional); + if (IS_ERR(pcs_fwnode)) + return ERR_CAST(pcs_fwnode); + + pcs =3D _pcs_get_tail(dev, pcs_fwnode, NULL); + fwnode_handle_put(pcs_fwnode); + return pcs; +} +EXPORT_SYMBOL_GPL(_pcs_get); + +#ifdef CONFIG_OF_DYNAMIC +static void of_changeset_cleanup(void *data) +{ + struct of_changeset *ocs =3D data; + + if (WARN(of_changeset_revert(ocs), + "could not revert changeset; leaking memory\n")) + return; + + of_changeset_destroy(ocs); + kfree(ocs); +} + +/** + * pcs_get_by_fwnode_compat() - Get a PCS with a compatibility fallback + * @dev: The device requesting the PCS + * @fwnode: The &struct fwnode_handle of the PCS itself + * @fixup: Callback to fix up @fwnode for compatibility + * @data: Passed to @fixup + * + * This function looks up a PCS and retries on failure after fixing up @fw= node. + * It is intended to assist in backwards-compatible behavior for drivers t= hat + * used to create a PCS directly from a &struct device_node. This function + * should NOT be used in new drivers. + * + * @fixup modifies a devicetree changeset to create any properties necessa= ry to + * bind the PCS's &struct device_node. At the very least, it should use + * of_changeset_add_prop_string() to add a compatible property. + * + * Note that unlike pcs_get_by_fwnode, @fwnode is the &struct fwnode_handl= e of + * the PCS itself, and not that of the requesting device. @fwnode could be + * looked up with pcs_find_fwnode() or determined by some other means for + * compatibility. + * + * Return: A PCS on success or an error pointer on failure + */ +struct phylink_pcs * +pcs_get_by_fwnode_compat(struct device *dev, struct fwnode_handle *fwnode, + int (*fixup)(struct of_changeset *ocs, + struct device_node *np, void *data), + void *data) +{ + struct mdio_device *mdiodev; + struct of_changeset *ocs; + struct phylink_pcs *pcs; + struct device_node *np; + struct device *pcsdev; + int err; + + /* First attempt */ + pcs =3D _pcs_get_tail(dev, fwnode, NULL); + if (PTR_ERR(pcs) !=3D -EPROBE_DEFER) + return pcs; + + /* No luck? Maybe there's no compatible... */ + np =3D to_of_node(fwnode); + if (!np || of_property_present(np, "compatible")) + return pcs; + + /* OK, let's try fixing things up */ + pr_warn("%pOF is missing a compatible\n", np); + ocs =3D kmalloc(sizeof(*ocs), GFP_KERNEL); + if (!ocs) + return ERR_PTR(-ENOMEM); + + of_changeset_init(ocs); + err =3D fixup(ocs, np, data); + if (err) + goto err_ocs; + + err =3D of_changeset_apply(ocs); + if (err) + goto err_ocs; + + err =3D devm_add_action_or_reset(dev, of_changeset_cleanup, ocs); + if (err) + return ERR_PTR(err); + + mdiodev =3D fwnode_mdio_find_device(fwnode); + if (mdiodev) { + /* Clear that pesky PHY flag so we can match PCS drivers */ + device_lock(&mdiodev->dev); + mdiodev->flags &=3D ~MDIO_DEVICE_FLAG_PHY; + device_unlock(&mdiodev->dev); + pcsdev =3D &mdiodev->dev; + } else { + pcsdev =3D get_device(fwnode->dev); + if (!pcsdev) + return ERR_PTR(-EPROBE_DEFER); + } + + err =3D device_reprobe(pcsdev); + put_device(pcsdev); + if (err) + return ERR_PTR(err); + + return _pcs_get_tail(dev, fwnode, NULL); + +err_ocs: + of_changeset_destroy(ocs); + kfree(ocs); + return ERR_PTR(err); +} +EXPORT_SYMBOL_GPL(pcs_get_by_fwnode_compat); +#endif + +/** + * pcs_put() - Release a previously-acquired PCS + * @pcs: The PCS to put + * + * This frees resources associated with the PCS which were acquired when i= t was + * gotten. + */ +void pcs_put(struct phylink_pcs *pcs) +{ + struct pcs_wrapper *wrapper; + + if (!pcs) + return; + + wrapper =3D pcs_to_wrapper(pcs); + if (refcount_dec_and_test(&wrapper->refcnt)) + kfree(wrapper); +} +EXPORT_SYMBOL_GPL(pcs_put); diff --git a/include/linux/pcs.h b/include/linux/pcs.h new file mode 100644 index 000000000000..6f04a3d22669 --- /dev/null +++ b/include/linux/pcs.h @@ -0,0 +1,205 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2022 Sean Anderson + */ + +#ifndef _PCS_H +#define _PCS_H + +#include + +struct device_node; +struct of_changeset; +struct phylink_pcs; + +int pcs_register_full(struct device *dev, struct fwnode_handle *fwnode, + struct phylink_pcs *pcs); +void pcs_unregister(struct phylink_pcs *pcs); +int devm_pcs_register_full(struct device *dev, struct fwnode_handle *fwnod= e, + struct phylink_pcs *pcs); + +/** + * pcs_register() - register a new PCS + * @dev: The device requesting the PCS + * @pcs: The PCS to register + * + * Registers a new PCS which can be attached to a phylink. + * + * Return: 0 on success, or -errno on error + */ +static inline int pcs_register(struct device *dev, struct phylink_pcs *pcs) +{ + return pcs_register_full(dev, dev_fwnode(dev), pcs); +} + +/** + * devm_pcs_register - resource managed pcs_register() + * @dev: device that is registering this PCS + * @pcs: the PCS to register + * + * Managed pcs_register(). For PCSs registered by this function, + * pcs_unregister() is automatically called on driver detach. See + * pcs_register() for more information. + * + * Return: 0 on success, or -errno on failure + */ +static inline int devm_pcs_register(struct device *dev, struct phylink_pcs= *pcs) +{ + return devm_pcs_register_full(dev, dev_fwnode(dev), pcs); +} + +struct fwnode_handle *pcs_find_fwnode(const struct fwnode_handle *mac_node, + const char *id, const char *fallback, + bool optional); + +#ifdef CONFIG_PCS +struct phylink_pcs *_pcs_get_tail(struct device *dev, + const struct fwnode_handle *fwnode, + const struct device *pcs_dev); +struct phylink_pcs *_pcs_get(struct device *dev, struct fwnode_handle *fwn= ode, + const char *id, const char *fallback, + bool optional); +void pcs_put(struct phylink_pcs *handle); + +/** + * pcs_get() - Get a PCS based on a fwnode + * @dev: The device requesting the PCS + * @id: The name of the PCS + * + * Find and get a PCS, as referenced by @dev's &struct fwnode_handle. See + * pcs_find_fwnode() for details. Each call to this function must be balan= ced + * with one to pcs_put(). + * + * Return: A PCS on success or an error pointer on failure + */ +static inline struct phylink_pcs *pcs_get(struct device *dev, const char *= id) +{ + return _pcs_get(dev, dev_fwnode(dev), id, NULL, false); +} + +/** + * pcs_get_optional() - Optionally get a PCS based on a fwnode + * @dev: The device requesting the PCS + * @id: The name of the PCS + * + * Optionally find and get a PCS, as referenced by @dev's &struct + * fwnode_handle. See pcs_find_fwnode() for details. Each call to this fun= ction + * must be balanced with one to pcs_put(). + * + * Return: A PCS on success, %NULL if none was found, or an error pointer = on + * * failure + */ +static inline struct phylink_pcs *pcs_get_optional(struct device *dev, + const char *id) +{ + return _pcs_get(dev, dev_fwnode(dev), id, NULL, true); +} + +/** + * pcs_get_by_fwnode() - Get a PCS based on a fwnode + * @dev: The device requesting the PCS + * @fwnode: The &struct fwnode_handle referencing the PCS + * @id: The name of the PCS + * + * Find and get a PCS, as referenced by @fwnode. See pcs_find_fwnode() for + * details. Each call to this function must be balanced with one to pcs_pu= t(). + * + * Return: A PCS on success or an error pointer on failure + */ +static inline struct phylink_pcs +*pcs_get_by_fwnode(struct device *dev, struct fwnode_handle *fwnode, + const char *id) +{ + return _pcs_get(dev, fwnode, id, NULL, false); +} + +/** + * pcs_get_by_fwnode_optional() - Optionally get a PCS based on a fwnode + * @dev: The device requesting the PCS + * @fwnode: The &struct fwnode_handle referencing the PCS + * @id: The name of the PCS + * + * Optionally find and get a PCS, as referenced by @fwnode. See + * pcs_find_fwnode() for details. Each call to this function must be balan= ced + * with one to pcs_put(). + * + * Return: A PCS on success, %NULL if none was found, or an error pointer = on + * * failure + */ +static inline struct phylink_pcs +*pcs_get_by_fwnode_optional(struct device *dev, struct fwnode_handle *fwno= de, + const char *id) +{ + return _pcs_get(dev, fwnode, id, NULL, true); +} + +/** + * pcs_get_by_dev() - Get a PCS from its providing device + * @dev: The device requesting the PCS + * @pcs_dev: The device providing the PCS + * + * Get the first PCS registered by @pcs_dev. Each call to this function mu= st be + * balanced with one to pcs_put(). + * + * Return: A PCS on success or an error pointer on failure + */ +static inline struct phylink_pcs *pcs_get_by_dev(struct device *dev, + const struct device *pcs_dev) +{ + return _pcs_get_tail(dev, NULL, pcs_dev); +} +#else /* CONFIG_PCS */ +static inline void pcs_put(struct phylink_pcs *handle) +{ +} + +static inline struct phylink_pcs *pcs_get(struct device *dev, const char *= id) +{ + return ERR_PTR(-EOPNOTSUPP); +} + +static inline struct phylink_pcs *pcs_get_optional(struct device *dev, + const char *id) +{ + return NULL; +} + +static inline struct phylink_pcs +*pcs_get_by_fwnode(struct device *dev, struct fwnode_handle *fwnode, + const char *id) +{ + return ERR_PTR(-EOPNOTSUPP); +} + +static inline struct phylink_pcs +*pcs_get_by_fwnode_optional(struct device *dev, struct fwnode_handle *fwno= de, + const char *id) +{ + return NULL; +} + +static inline struct phylink_pcs *pcs_get_by_dev(struct device *dev, + const struct device *pcs_dev) +{ + return ERR_PTR(-EOPNOTSUPP); +} +#endif + +#ifdef CONFIG_OF_DYNAMIC +struct phylink_pcs * +pcs_get_by_fwnode_compat(struct device *dev, struct fwnode_handle *fwnode, + int (*fixup)(struct of_changeset *ocs, struct device_node *np, + void *data), + void *data); +#else +static inline struct phylink_pcs * +pcs_get_by_fwnode_compat(struct device *dev, struct fwnode_handle *fwnode, + int (*fixup)(struct of_changeset *ocs, struct device_node *np, + void *data), + void *data) +{ + return _pcs_get_tail(dev, fwnode, NULL); +} +#endif + +#endif /* PCS_H */ --=20 2.35.1.1320.gc452695387.dirty From nobody Mon Dec 15 01:49:03 2025 Received: from out-181.mta0.migadu.com (out-181.mta0.migadu.com [91.218.175.181]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 102751F2C44 for ; Fri, 23 May 2025 20:34:37 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=91.218.175.181 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1748032479; cv=none; b=EA5TB5rsogBtCmdAoYFvvAY6YKPcRVHkKH5lGoEUaaLezKhWwiBM9Wugad/12XO9ipykcESce+y80QIkkXvCaALVTg2r2a9xZoSSJSgxIinUuSLy3TNrwIOR53F7hpDWRIOtYs6uXAdRsiJKytKTImSEZsMxmIMCH9HlqmUVhHs= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1748032479; c=relaxed/simple; bh=BpOPhhUmAooZYi+vtPLF6RqGxViWB1xQigFxs2AIdyE=; h=From:To:Cc:Subject:Date:Message-Id:In-Reply-To:References: MIME-Version; b=l1+9rugdiCCbwdZdMDQzd2ZKW4q9XeDrgCrSB0anjfZJ6c74HreNDlFNAEFBYnk/9srIQJYx/5BB39WnmxbQS4Tf1QHBrqcjkO95tUoaE19iqS/ByjV7zGQt3cfDFU8YO9wqg4v/6bqu3QUcIt9eZM4ZToyC1r1rylb63eKvP0w= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linux.dev; spf=pass smtp.mailfrom=linux.dev; dkim=pass (1024-bit key) header.d=linux.dev header.i=@linux.dev header.b=VniOmcwR; arc=none smtp.client-ip=91.218.175.181 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linux.dev Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=linux.dev Authentication-Results: smtp.subspace.kernel.org; dkim=pass (1024-bit key) header.d=linux.dev header.i=@linux.dev header.b="VniOmcwR" X-Report-Abuse: Please report any abuse attempt to abuse@migadu.com and include these headers. DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linux.dev; s=key1; t=1748032476; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=c9huAoqeTCtycjuquWPGnK4R6jNSfK5c2rVHkBsZ7MU=; b=VniOmcwRZ0iaMZxZKjsL6x+F0lRYzj5NhCcx/7tKQD+WJt82pRZdO7VLY2XqNECkSIDl8P 1kzFEfvTtbOdEUv8ZM6hPlRuZXsPTZu7T6xWEmOgfEal/tryPp5zHTfv26qIEk7BZa9waA D70KXP8j923XSGmLLEYbKugTfhtP6aQ= From: Sean Anderson To: netdev@vger.kernel.org, Andrew Lunn , "David S . Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni , Russell King Cc: Lei Wei , Heiner Kallweit , Christian Marangi , Kory Maincent , Simon Horman , Daniel Golle , Vineeth Karumanchi , linux-kernel@vger.kernel.org, Vladimir Oltean , Sean Anderson , Alexandre Belloni , Claudiu Manoil , UNGLinuxDriver@microchip.com Subject: [net-next PATCH v5 04/10] net: dsa: ocelot: suppress PHY device scanning on the internal MDIO bus Date: Fri, 23 May 2025 16:33:33 -0400 Message-Id: <20250523203339.1993685-5-sean.anderson@linux.dev> In-Reply-To: <20250523203339.1993685-1-sean.anderson@linux.dev> References: <20250523203339.1993685-1-sean.anderson@linux.dev> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable X-Migadu-Flow: FLOW_OUT Content-Type: text/plain; charset="utf-8" From: Vladimir Oltean This bus contains Lynx PCS devices, and if the lynx-pcs driver ever decided to call mdio_device_register(), it would fail due to mdiobus_scan() having created a dummy phydev for the same address (the PCS responds to standard clause 22 PHY ID registers and can therefore by autodetected by phylib which thinks it's a PHY). On the Seville driver, things are a bit more complicated, since bus creation is handled by mscc_miim_setup() and that is shared with the dedicated mscc-miim driver. Suppress PHY scanning only for the Seville internal MDIO bus rather than for the whole mscc-miim driver, since we know that on NXP T1040, this bus only contains Lynx PCS devices. Signed-off-by: Vladimir Oltean Signed-off-by: Sean Anderson --- (no changes since v1) drivers/net/dsa/ocelot/felix_vsc9959.c | 4 ++++ drivers/net/dsa/ocelot/seville_vsc9953.c | 5 +++++ 2 files changed, 9 insertions(+) diff --git a/drivers/net/dsa/ocelot/felix_vsc9959.c b/drivers/net/dsa/ocelo= t/felix_vsc9959.c index 7b35d24c38d7..087d368a59e0 100644 --- a/drivers/net/dsa/ocelot/felix_vsc9959.c +++ b/drivers/net/dsa/ocelot/felix_vsc9959.c @@ -1001,6 +1001,10 @@ static int vsc9959_mdio_bus_alloc(struct ocelot *oce= lot) bus->read_c45 =3D enetc_mdio_read_c45; bus->write_c45 =3D enetc_mdio_write_c45; bus->parent =3D dev; + /* Suppress PHY device creation in mdiobus_scan(), + * we have Lynx PCSs + */ + bus->phy_mask =3D ~0; mdio_priv =3D bus->priv; mdio_priv->hw =3D hw; /* This gets added to imdio_regs, which already maps addresses diff --git a/drivers/net/dsa/ocelot/seville_vsc9953.c b/drivers/net/dsa/oce= lot/seville_vsc9953.c index eb3944ba2a72..28bcdef34a6c 100644 --- a/drivers/net/dsa/ocelot/seville_vsc9953.c +++ b/drivers/net/dsa/ocelot/seville_vsc9953.c @@ -901,6 +901,11 @@ static int vsc9953_mdio_bus_alloc(struct ocelot *ocelo= t) return rc; } =20 + /* Suppress PHY device creation in mdiobus_scan(), + * we have Lynx PCSs + */ + bus->phy_mask =3D ~0; + /* Needed in order to initialize the bus mutex lock */ rc =3D devm_of_mdiobus_register(dev, bus, NULL); if (rc < 0) { --=20 2.35.1.1320.gc452695387.dirty From nobody Mon Dec 15 01:49:03 2025 Received: from out-184.mta0.migadu.com (out-184.mta0.migadu.com [91.218.175.184]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id C5F3F20FABC for ; Fri, 23 May 2025 20:34:40 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=91.218.175.184 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1748032483; cv=none; b=WLI2HdAygDJfhKprVQvpwDhDiCszLSwJPdWWPSDUSOYLFLd2AS1tSXk/ao+CA/iNwvFI6120Bl6xziZBc+hQHkmk4cEBp66LVZLTkBSe1+F8eG0CmNpfHLqsUCxlxWX7VbiGE7Om2Wsn1l5wNiZ7NQeSJY38hJn/WlADpx1YMr8= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1748032483; c=relaxed/simple; bh=viYdFTRf5zkPD6nrOL5UmiZoEyMaT4H8SQk8Bo37ZSE=; h=From:To:Cc:Subject:Date:Message-Id:In-Reply-To:References: MIME-Version; b=sUWwTmktMnqtaXmF6TM33PuoCIzOA3Vx1WIlqh6ySuOfCcHnMfSkpI4rYrLNA4hAAYOom76Fkld9Ll5Gb7/FACZG/YwpBCSBmj3XkD1isLWOYfpkvbbqZHmgD5484e7O3pjJxwhP6U4z3Wg6/BXyv4FxsGyjnwQC1p65JswkmWo= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linux.dev; spf=pass smtp.mailfrom=linux.dev; dkim=pass (1024-bit key) header.d=linux.dev header.i=@linux.dev header.b=AtmqG6fM; arc=none smtp.client-ip=91.218.175.184 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linux.dev Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=linux.dev Authentication-Results: smtp.subspace.kernel.org; dkim=pass (1024-bit key) header.d=linux.dev header.i=@linux.dev header.b="AtmqG6fM" X-Report-Abuse: Please report any abuse attempt to abuse@migadu.com and include these headers. DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linux.dev; s=key1; t=1748032478; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=dL6+i5QA3yo+v7I6pIkLXzqhTBxoo5/kgLYhQkKFsyM=; b=AtmqG6fM3/fZdst1bPGLcWCXaAd1tTtdQYWIG13gX0aoMjCCuUedki2Y9whcXg06z4zdh2 GS2Ho7gAoQZ0jPmHYZ9uMUN31y+Io9bi10idmcDBTYzWwYQ/8g0tFcBbz0oYDJxSZd8cLg bQfEigXkr5508ZAybc8iRlTnlhQp91M= From: Sean Anderson To: netdev@vger.kernel.org, Andrew Lunn , "David S . Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni , Russell King Cc: Lei Wei , Heiner Kallweit , Christian Marangi , Kory Maincent , Simon Horman , Daniel Golle , Vineeth Karumanchi , linux-kernel@vger.kernel.org, Sean Anderson , Ioana Ciornei , Vladimir Oltean , imx@lists.linux.dev, linux-stm32@st-md-mailman.stormreply.com Subject: [net-next PATCH v5 05/10] net: pcs: lynx: Convert to an MDIO driver Date: Fri, 23 May 2025 16:33:34 -0400 Message-Id: <20250523203339.1993685-6-sean.anderson@linux.dev> In-Reply-To: <20250523203339.1993685-1-sean.anderson@linux.dev> References: <20250523203339.1993685-1-sean.anderson@linux.dev> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable X-Migadu-Flow: FLOW_OUT Content-Type: text/plain; charset="utf-8" This converts the lynx PCS driver to a proper MDIO driver. This allows using a more conventional driver lifecycle (e.g. with a probe and remove). It will also make it easier to add interrupt support. The existing helpers are converted to bind the MDIO driver instead of creating the PCS directly. As lynx_pcs_create_mdiodev creates the PCS device, we can just set the modalias. For lynx_pcs_create_fwnode, we try to get the PCS the usual way, and if that fails we edit the devicetree to add a compatible and reprobe the device. To ensure my contributions remain free software, remove the BSD option from the license. This is permitted because the SPDX uses "OR". Signed-off-by: Sean Anderson --- Changes in v5: - Use MDIO_BUS instead of MDIO_DEVICE Changes in v4: - Add a note about the license - Convert to dev-less pcs_put Changes in v3: - Call devm_pcs_register instead of devm_pcs_register_provider Changes in v2: - Add support for #pcs-cells - Remove unused variable lynx_properties drivers/net/dsa/ocelot/Kconfig | 4 + drivers/net/dsa/ocelot/felix_vsc9959.c | 11 +- drivers/net/dsa/ocelot/seville_vsc9953.c | 11 +- drivers/net/ethernet/altera/Kconfig | 2 + drivers/net/ethernet/altera/altera_tse_main.c | 7 +- drivers/net/ethernet/freescale/dpaa/Kconfig | 2 +- drivers/net/ethernet/freescale/dpaa2/Kconfig | 3 + .../net/ethernet/freescale/dpaa2/dpaa2-mac.c | 11 +- drivers/net/ethernet/freescale/enetc/Kconfig | 2 + .../net/ethernet/freescale/enetc/enetc_pf.c | 8 +- .../net/ethernet/freescale/enetc/enetc_pf.h | 1 - .../freescale/enetc/enetc_pf_common.c | 4 +- drivers/net/ethernet/freescale/fman/Kconfig | 4 +- .../net/ethernet/freescale/fman/fman_memac.c | 25 ++-- drivers/net/ethernet/stmicro/stmmac/Kconfig | 3 + .../ethernet/stmicro/stmmac/dwmac-socfpga.c | 6 +- drivers/net/pcs/Kconfig | 11 +- drivers/net/pcs/pcs-lynx.c | 110 ++++++++++-------- include/linux/pcs-lynx.h | 13 ++- 19 files changed, 128 insertions(+), 110 deletions(-) diff --git a/drivers/net/dsa/ocelot/Kconfig b/drivers/net/dsa/ocelot/Kconfig index 081e7a88ea02..907c29d61c14 100644 --- a/drivers/net/dsa/ocelot/Kconfig +++ b/drivers/net/dsa/ocelot/Kconfig @@ -42,7 +42,9 @@ config NET_DSA_MSCC_FELIX select NET_DSA_TAG_OCELOT_8021Q select NET_DSA_TAG_OCELOT select FSL_ENETC_MDIO + select PCS select PCS_LYNX + select MDIO_BUS help This driver supports the VSC9959 (Felix) switch, which is embedded as a PCIe function of the NXP LS1028A ENETC RCiEP. @@ -58,7 +60,9 @@ config NET_DSA_MSCC_SEVILLE select NET_DSA_MSCC_FELIX_DSA_LIB select NET_DSA_TAG_OCELOT_8021Q select NET_DSA_TAG_OCELOT + select PCS select PCS_LYNX + select MDIO_BUS help This driver supports the VSC9953 (Seville) switch, which is embedded as a platform device on the NXP T1040 SoC. diff --git a/drivers/net/dsa/ocelot/felix_vsc9959.c b/drivers/net/dsa/ocelo= t/felix_vsc9959.c index 087d368a59e0..6feae845af10 100644 --- a/drivers/net/dsa/ocelot/felix_vsc9959.c +++ b/drivers/net/dsa/ocelot/felix_vsc9959.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include @@ -1033,7 +1034,7 @@ static int vsc9959_mdio_bus_alloc(struct ocelot *ocel= ot) if (ocelot_port->phy_mode =3D=3D PHY_INTERFACE_MODE_INTERNAL) continue; =20 - phylink_pcs =3D lynx_pcs_create_mdiodev(felix->imdio, port); + phylink_pcs =3D lynx_pcs_create_mdiodev(dev, felix->imdio, port); if (IS_ERR(phylink_pcs)) continue; =20 @@ -1050,12 +1051,8 @@ static void vsc9959_mdio_bus_free(struct ocelot *oce= lot) struct felix *felix =3D ocelot_to_felix(ocelot); int port; =20 - for (port =3D 0; port < ocelot->num_phys_ports; port++) { - struct phylink_pcs *phylink_pcs =3D felix->pcs[port]; - - if (phylink_pcs) - lynx_pcs_destroy(phylink_pcs); - } + for (port =3D 0; port < ocelot->num_phys_ports; port++) + pcs_put(felix->pcs[port]); mdiobus_unregister(felix->imdio); mdiobus_free(felix->imdio); } diff --git a/drivers/net/dsa/ocelot/seville_vsc9953.c b/drivers/net/dsa/oce= lot/seville_vsc9953.c index 28bcdef34a6c..627c0bd7a777 100644 --- a/drivers/net/dsa/ocelot/seville_vsc9953.c +++ b/drivers/net/dsa/ocelot/seville_vsc9953.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include @@ -926,7 +927,7 @@ static int vsc9953_mdio_bus_alloc(struct ocelot *ocelot) if (ocelot_port->phy_mode =3D=3D PHY_INTERFACE_MODE_INTERNAL) continue; =20 - phylink_pcs =3D lynx_pcs_create_mdiodev(felix->imdio, addr); + phylink_pcs =3D lynx_pcs_create_mdiodev(dev, felix->imdio, addr); if (IS_ERR(phylink_pcs)) continue; =20 @@ -943,12 +944,8 @@ static void vsc9953_mdio_bus_free(struct ocelot *ocelo= t) struct felix *felix =3D ocelot_to_felix(ocelot); int port; =20 - for (port =3D 0; port < ocelot->num_phys_ports; port++) { - struct phylink_pcs *phylink_pcs =3D felix->pcs[port]; - - if (phylink_pcs) - lynx_pcs_destroy(phylink_pcs); - } + for (port =3D 0; port < ocelot->num_phys_ports; port++) + pcs_put(felix->pcs[port]); =20 /* mdiobus_unregister and mdiobus_free handled by devres */ } diff --git a/drivers/net/ethernet/altera/Kconfig b/drivers/net/ethernet/alt= era/Kconfig index 4ef819a9a1ad..9b68321e8b86 100644 --- a/drivers/net/ethernet/altera/Kconfig +++ b/drivers/net/ethernet/altera/Kconfig @@ -5,7 +5,9 @@ config ALTERA_TSE depends on HAS_IOMEM select PHYLIB select PHYLINK + select PCS select PCS_LYNX + select MDIO_BUS select MDIO_REGMAP select REGMAP_MMIO help diff --git a/drivers/net/ethernet/altera/altera_tse_main.c b/drivers/net/et= hernet/altera/altera_tse_main.c index 3f6204de9e6b..8bd4753a04bc 100644 --- a/drivers/net/ethernet/altera/altera_tse_main.c +++ b/drivers/net/ethernet/altera/altera_tse_main.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include #include @@ -1412,7 +1413,7 @@ static int altera_tse_probe(struct platform_device *p= dev) goto err_init_pcs; } =20 - priv->pcs =3D lynx_pcs_create_mdiodev(pcs_bus, 0); + priv->pcs =3D lynx_pcs_create_mdiodev(&pdev->dev, pcs_bus, 0); if (IS_ERR(priv->pcs)) { ret =3D PTR_ERR(priv->pcs); goto err_init_pcs; @@ -1444,7 +1445,7 @@ static int altera_tse_probe(struct platform_device *p= dev) =20 return 0; err_init_phylink: - lynx_pcs_destroy(priv->pcs); + pcs_put(priv->pcs); err_init_pcs: unregister_netdev(ndev); err_register_netdev: @@ -1466,7 +1467,7 @@ static void altera_tse_remove(struct platform_device = *pdev) altera_tse_mdio_destroy(ndev); unregister_netdev(ndev); phylink_destroy(priv->phylink); - lynx_pcs_destroy(priv->pcs); + pcs_put(priv->pcs); =20 free_netdev(ndev); } diff --git a/drivers/net/ethernet/freescale/dpaa/Kconfig b/drivers/net/ethe= rnet/freescale/dpaa/Kconfig index 2b560661c82a..bb658f1db129 100644 --- a/drivers/net/ethernet/freescale/dpaa/Kconfig +++ b/drivers/net/ethernet/freescale/dpaa/Kconfig @@ -3,7 +3,7 @@ menuconfig FSL_DPAA_ETH tristate "DPAA Ethernet" depends on FSL_DPAA && FSL_FMAN select PHYLINK - select PCS_LYNX + select MDIO_BUS help Data Path Acceleration Architecture Ethernet driver, supporting the Freescale QorIQ chips. diff --git a/drivers/net/ethernet/freescale/dpaa2/Kconfig b/drivers/net/eth= ernet/freescale/dpaa2/Kconfig index d029b69c3f18..806931b2b9fa 100644 --- a/drivers/net/ethernet/freescale/dpaa2/Kconfig +++ b/drivers/net/ethernet/freescale/dpaa2/Kconfig @@ -2,8 +2,11 @@ config FSL_DPAA2_ETH tristate "Freescale DPAA2 Ethernet" depends on FSL_MC_BUS && FSL_MC_DPIO + select OF_DYNAMIC select PHYLINK + select PCS select PCS_LYNX + select MDIO_BUS select FSL_XGMAC_MDIO select NET_DEVLINK help diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c b/drivers/net= /ethernet/freescale/dpaa2/dpaa2-mac.c index 422ce13a7c94..0dc0a265db51 100644 --- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c +++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c @@ -2,6 +2,7 @@ /* Copyright 2019 NXP */ =20 #include +#include #include #include #include @@ -262,7 +263,7 @@ static int dpaa2_pcs_create(struct dpaa2_mac *mac, return 0; } =20 - pcs =3D lynx_pcs_create_fwnode(node); + pcs =3D lynx_pcs_create_fwnode(&mac->mc_dev->dev, node); fwnode_handle_put(node); =20 if (pcs =3D=3D ERR_PTR(-EPROBE_DEFER)) { @@ -288,12 +289,8 @@ static int dpaa2_pcs_create(struct dpaa2_mac *mac, =20 static void dpaa2_pcs_destroy(struct dpaa2_mac *mac) { - struct phylink_pcs *phylink_pcs =3D mac->pcs; - - if (phylink_pcs) { - lynx_pcs_destroy(phylink_pcs); - mac->pcs =3D NULL; - } + pcs_put(mac->pcs); + mac->pcs =3D NULL; } =20 static void dpaa2_mac_set_supported_interfaces(struct dpaa2_mac *mac) diff --git a/drivers/net/ethernet/freescale/enetc/Kconfig b/drivers/net/eth= ernet/freescale/enetc/Kconfig index e917132d3714..f3ac430c9d4f 100644 --- a/drivers/net/ethernet/freescale/enetc/Kconfig +++ b/drivers/net/ethernet/freescale/enetc/Kconfig @@ -30,7 +30,9 @@ config FSL_ENETC select FSL_ENETC_MDIO select NXP_ENETC_PF_COMMON select PHYLINK + select PCS select PCS_LYNX + select MDIO_BUS select DIMLIB help This driver supports NXP ENETC gigabit ethernet controller PCIe diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.c b/drivers/net/= ethernet/freescale/enetc/enetc_pf.c index f63a29e2e031..8d0950c28190 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c +++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c @@ -34,12 +34,7 @@ static void enetc_pf_set_primary_mac_addr(struct enetc_h= w *hw, int si, static struct phylink_pcs *enetc_pf_create_pcs(struct enetc_pf *pf, struct mii_bus *bus) { - return lynx_pcs_create_mdiodev(bus, 0); -} - -static void enetc_pf_destroy_pcs(struct phylink_pcs *pcs) -{ - lynx_pcs_destroy(pcs); + return lynx_pcs_create_mdiodev(&pf->si->pdev->dev, bus, 0); } =20 static void enetc_set_vlan_promisc(struct enetc_hw *hw, char si_map) @@ -914,7 +909,6 @@ static const struct enetc_pf_ops enetc_pf_ops =3D { .set_si_primary_mac =3D enetc_pf_set_primary_mac_addr, .get_si_primary_mac =3D enetc_pf_get_primary_mac_addr, .create_pcs =3D enetc_pf_create_pcs, - .destroy_pcs =3D enetc_pf_destroy_pcs, .enable_psfp =3D enetc_psfp_enable, }; =20 diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.h b/drivers/net/= ethernet/freescale/enetc/enetc_pf.h index ae407e9e9ee7..be22b036df42 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc_pf.h +++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.h @@ -32,7 +32,6 @@ struct enetc_pf_ops { void (*set_si_primary_mac)(struct enetc_hw *hw, int si, const u8 *addr); void (*get_si_primary_mac)(struct enetc_hw *hw, int si, u8 *addr); struct phylink_pcs *(*create_pcs)(struct enetc_pf *pf, struct mii_bus *bu= s); - void (*destroy_pcs)(struct phylink_pcs *pcs); int (*enable_psfp)(struct enetc_ndev_priv *priv); }; =20 diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf_common.c b/drive= rs/net/ethernet/freescale/enetc/enetc_pf_common.c index edf14a95cab7..1c53036d17df 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc_pf_common.c +++ b/drivers/net/ethernet/freescale/enetc/enetc_pf_common.c @@ -4,6 +4,7 @@ #include #include #include +#include =20 #include "enetc_pf_common.h" =20 @@ -248,8 +249,7 @@ static int enetc_imdio_create(struct enetc_pf *pf) =20 static void enetc_imdio_remove(struct enetc_pf *pf) { - if (pf->pcs && pf->ops->destroy_pcs) - pf->ops->destroy_pcs(pf->pcs); + pcs_put(pf->pcs); =20 if (pf->imdio) { mdiobus_unregister(pf->imdio); diff --git a/drivers/net/ethernet/freescale/fman/Kconfig b/drivers/net/ethe= rnet/freescale/fman/Kconfig index a55542c1ad65..2b51b223716b 100644 --- a/drivers/net/ethernet/freescale/fman/Kconfig +++ b/drivers/net/ethernet/freescale/fman/Kconfig @@ -3,10 +3,12 @@ config FSL_FMAN tristate "FMan support" depends on FSL_SOC || ARCH_LAYERSCAPE || COMPILE_TEST select GENERIC_ALLOCATOR + select OF_DYNAMIC + select MDIO_BUS select PHYLINK + select PCS select PCS_LYNX select CRC32 - default n help Freescale Data-Path Acceleration Architecture Frame Manager (FMan) support diff --git a/drivers/net/ethernet/freescale/fman/fman_memac.c b/drivers/net= /ethernet/freescale/fman/fman_memac.c index 3925441143fa..a6064bc80ce7 100644 --- a/drivers/net/ethernet/freescale/fman/fman_memac.c +++ b/drivers/net/ethernet/freescale/fman/fman_memac.c @@ -11,6 +11,7 @@ =20 #include #include +#include #include #include #include @@ -972,21 +973,21 @@ static int memac_init(struct fman_mac *memac) return 0; } =20 -static void pcs_put(struct phylink_pcs *pcs) +static void memac_pcs_put(struct phylink_pcs *pcs) { if (IS_ERR_OR_NULL(pcs)) return; =20 - lynx_pcs_destroy(pcs); + pcs_put(pcs); } =20 static int memac_free(struct fman_mac *memac) { free_init_resources(memac); =20 - pcs_put(memac->sgmii_pcs); - pcs_put(memac->qsgmii_pcs); - pcs_put(memac->xfi_pcs); + memac_pcs_put(memac->sgmii_pcs); + memac_pcs_put(memac->qsgmii_pcs); + memac_pcs_put(memac->xfi_pcs); kfree(memac->memac_drv_param); kfree(memac); =20 @@ -1033,7 +1034,8 @@ static struct fman_mac *memac_config(struct mac_devic= e *mac_dev, return memac; } =20 -static struct phylink_pcs *memac_pcs_create(struct device_node *mac_node, +static struct phylink_pcs *memac_pcs_create(struct device *dev, + struct device_node *mac_node, int index) { struct device_node *node; @@ -1043,7 +1045,7 @@ static struct phylink_pcs *memac_pcs_create(struct de= vice_node *mac_node, if (!node) return ERR_PTR(-ENODEV); =20 - pcs =3D lynx_pcs_create_fwnode(of_fwnode_handle(node)); + pcs =3D lynx_pcs_create_fwnode(dev, of_fwnode_handle(node)); of_node_put(node); =20 return pcs; @@ -1100,7 +1102,7 @@ int memac_initialization(struct mac_device *mac_dev, =20 err =3D of_property_match_string(mac_node, "pcs-handle-names", "xfi"); if (err >=3D 0) { - memac->xfi_pcs =3D memac_pcs_create(mac_node, err); + memac->xfi_pcs =3D memac_pcs_create(mac_dev->dev, mac_node, err); if (IS_ERR(memac->xfi_pcs)) { err =3D PTR_ERR(memac->xfi_pcs); dev_err_probe(mac_dev->dev, err, "missing xfi pcs\n"); @@ -1112,7 +1114,8 @@ int memac_initialization(struct mac_device *mac_dev, =20 err =3D of_property_match_string(mac_node, "pcs-handle-names", "qsgmii"); if (err >=3D 0) { - memac->qsgmii_pcs =3D memac_pcs_create(mac_node, err); + memac->qsgmii_pcs =3D memac_pcs_create(mac_dev->dev, mac_node, + err); if (IS_ERR(memac->qsgmii_pcs)) { err =3D PTR_ERR(memac->qsgmii_pcs); dev_err_probe(mac_dev->dev, err, @@ -1128,11 +1131,11 @@ int memac_initialization(struct mac_device *mac_dev, */ err =3D of_property_match_string(mac_node, "pcs-handle-names", "sgmii"); if (err =3D=3D -EINVAL || err =3D=3D -ENODATA) - pcs =3D memac_pcs_create(mac_node, 0); + pcs =3D memac_pcs_create(mac_dev->dev, mac_node, 0); else if (err < 0) goto _return_fm_mac_free; else - pcs =3D memac_pcs_create(mac_node, err); + pcs =3D memac_pcs_create(mac_dev->dev, mac_node, err); =20 if (IS_ERR(pcs)) { err =3D PTR_ERR(pcs); diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethe= rnet/stmicro/stmmac/Kconfig index 67fa879b1e52..170ec691d090 100644 --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig @@ -182,9 +182,12 @@ config DWMAC_SOCFPGA tristate "SOCFPGA dwmac support" default ARCH_INTEL_SOCFPGA depends on OF && (ARCH_INTEL_SOCFPGA || COMPILE_TEST) + select OF_DYNAMIC select MFD_SYSCON + select MDIO_BUS select MDIO_REGMAP select REGMAP_MMIO + select PCS select PCS_LYNX help Support for ethernet controller on Altera SOCFPGA diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c b/drivers/= net/ethernet/stmicro/stmmac/dwmac-socfpga.c index 72b50f6d72f4..325486c06511 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c @@ -8,6 +8,7 @@ #include #include #include +#include #include #include #include @@ -414,7 +415,7 @@ static int socfpga_dwmac_pcs_init(struct stmmac_priv *p= riv) if (IS_ERR(pcs_bus)) return PTR_ERR(pcs_bus); =20 - pcs =3D lynx_pcs_create_mdiodev(pcs_bus, 0); + pcs =3D lynx_pcs_create_mdiodev(priv->device, pcs_bus, 0); if (IS_ERR(pcs)) return PTR_ERR(pcs); =20 @@ -424,8 +425,7 @@ static int socfpga_dwmac_pcs_init(struct stmmac_priv *p= riv) =20 static void socfpga_dwmac_pcs_exit(struct stmmac_priv *priv) { - if (priv->hw->phylink_pcs) - lynx_pcs_destroy(priv->hw->phylink_pcs); + pcs_put(priv->hw->phylink_pcs); } =20 static struct phylink_pcs *socfpga_dwmac_select_pcs(struct stmmac_priv *pr= iv, diff --git a/drivers/net/pcs/Kconfig b/drivers/net/pcs/Kconfig index 6d19625b696d..f274ebffaae3 100644 --- a/drivers/net/pcs/Kconfig +++ b/drivers/net/pcs/Kconfig @@ -26,10 +26,15 @@ config PCS_XPCS DesignWare XPCS controllers. =20 config PCS_LYNX - tristate + tristate "NXP Lynx PCS driver" + depends on PCS && MDIO_BUS help - This module provides helpers to phylink for managing the Lynx PCS - which is part of the Layerscape and QorIQ Ethernet SERDES. + This module provides driver support for the PCSs in Lynx 10g and 28g + SerDes devices. These devices are present in NXP QorIQ SoCs, + including the Layerscape series. + + If you want to use Ethernet on a QorIQ SoC, say "Y". If compiled as a + module, it will be called "pcs-lynx". =20 config PCS_MTK_LYNXI tristate diff --git a/drivers/net/pcs/pcs-lynx.c b/drivers/net/pcs/pcs-lynx.c index 23b40e9eacbb..bacba1dd52e2 100644 --- a/drivers/net/pcs/pcs-lynx.c +++ b/drivers/net/pcs/pcs-lynx.c @@ -1,11 +1,15 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) -/* Copyright 2020 NXP +// SPDX-License-Identifier: GPL-2.0+ +/* Copyright (C) 2022 Sean Anderson + * Copyright 2020 NXP * Lynx PCS MDIO helpers */ =20 #include #include +#include +#include #include +#include #include =20 #define SGMII_CLOCK_PERIOD_NS 8 /* PCS is clocked at 125 MHz */ @@ -343,16 +347,16 @@ static const phy_interface_t lynx_interfaces[] =3D { PHY_INTERFACE_MODE_USXGMII, }; =20 -static struct phylink_pcs *lynx_pcs_create(struct mdio_device *mdio) +static int lynx_pcs_probe(struct mdio_device *mdio) { + struct device *dev =3D &mdio->dev; struct lynx_pcs *lynx; - int i; + int i, ret; =20 - lynx =3D kzalloc(sizeof(*lynx), GFP_KERNEL); + lynx =3D devm_kzalloc(dev, sizeof(*lynx), GFP_KERNEL); if (!lynx) - return ERR_PTR(-ENOMEM); + return -ENOMEM; =20 - mdio_device_get(mdio); lynx->mdio =3D mdio; lynx->pcs.ops =3D &lynx_pcs_phylink_ops; lynx->pcs.poll =3D true; @@ -360,32 +364,64 @@ static struct phylink_pcs *lynx_pcs_create(struct mdi= o_device *mdio) for (i =3D 0; i < ARRAY_SIZE(lynx_interfaces); i++) __set_bit(lynx_interfaces[i], lynx->pcs.supported_interfaces); =20 - return lynx_to_phylink_pcs(lynx); + ret =3D devm_pcs_register(dev, &lynx->pcs); + if (ret) + return dev_err_probe(dev, ret, "could not register PCS\n"); + dev_info(dev, "probed\n"); + return 0; } =20 -struct phylink_pcs *lynx_pcs_create_mdiodev(struct mii_bus *bus, int addr) +static const struct of_device_id lynx_pcs_of_match[] =3D { + { .compatible =3D "fsl,lynx-pcs" }, + { }, +}; +MODULE_DEVICE_TABLE(of, lynx_pcs_of_match); + +static struct mdio_driver lynx_pcs_driver =3D { + .probe =3D lynx_pcs_probe, + .mdiodrv.driver =3D { + .name =3D "lynx-pcs", + .of_match_table =3D of_match_ptr(lynx_pcs_of_match), + }, +}; +mdio_module_driver(lynx_pcs_driver); + +struct phylink_pcs *lynx_pcs_create_mdiodev(struct device *dev, + struct mii_bus *bus, int addr) { struct mdio_device *mdio; struct phylink_pcs *pcs; + int err; =20 mdio =3D mdio_device_create(bus, addr); if (IS_ERR(mdio)) return ERR_CAST(mdio); =20 - pcs =3D lynx_pcs_create(mdio); - - /* lynx_create() has taken a refcount on the mdiodev if it was - * successful. If lynx_create() fails, this will free the mdio - * device here. In any case, we don't need to hold our reference - * anymore, and putting it here will allow mdio_device_put() in - * lynx_destroy() to automatically free the mdio device. - */ - mdio_device_put(mdio); + mdio->bus_match =3D mdio_device_bus_match; + strscpy(mdio->modalias, "lynx-pcs"); + err =3D mdio_device_register(mdio); + if (err) { + mdio_device_free(mdio); + return ERR_PTR(err); + } =20 + pcs =3D pcs_get_by_dev(dev, &mdio->dev); + mdio_device_free(mdio); return pcs; } EXPORT_SYMBOL(lynx_pcs_create_mdiodev); =20 +static int lynx_pcs_fixup(struct of_changeset *ocs, + struct device_node *np, void *data) +{ +#ifdef CONFIG_OF_DYNAMIC + return of_changeset_add_prop_string(ocs, np, "compatible", + "fsl,lynx-pcs"); +#else + return -ENODEV; +#endif +} + /* * lynx_pcs_create_fwnode() creates a lynx PCS instance from the fwnode * device indicated by node. @@ -396,40 +432,12 @@ EXPORT_SYMBOL(lynx_pcs_create_mdiodev); * -ENOMEM if we fail to allocate memory * pointer to a phylink_pcs on success */ -struct phylink_pcs *lynx_pcs_create_fwnode(struct fwnode_handle *node) +struct phylink_pcs *lynx_pcs_create_fwnode(struct device *dev, + struct fwnode_handle *node) { - struct mdio_device *mdio; - struct phylink_pcs *pcs; - - if (!fwnode_device_is_available(node)) - return ERR_PTR(-ENODEV); - - mdio =3D fwnode_mdio_find_device(node); - if (!mdio) - return ERR_PTR(-EPROBE_DEFER); - - pcs =3D lynx_pcs_create(mdio); - - /* lynx_create() has taken a refcount on the mdiodev if it was - * successful. If lynx_create() fails, this will free the mdio - * device here. In any case, we don't need to hold our reference - * anymore, and putting it here will allow mdio_device_put() in - * lynx_destroy() to automatically free the mdio device. - */ - mdio_device_put(mdio); - - return pcs; + return pcs_get_by_fwnode_compat(dev, node, lynx_pcs_fixup, NULL); } EXPORT_SYMBOL_GPL(lynx_pcs_create_fwnode); =20 -void lynx_pcs_destroy(struct phylink_pcs *pcs) -{ - struct lynx_pcs *lynx =3D phylink_pcs_to_lynx(pcs); - - mdio_device_put(lynx->mdio); - kfree(lynx); -} -EXPORT_SYMBOL(lynx_pcs_destroy); - -MODULE_DESCRIPTION("NXP Lynx PCS phylink library"); -MODULE_LICENSE("Dual BSD/GPL"); +MODULE_DESCRIPTION("NXP Lynx PCS phylink driver"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/pcs-lynx.h b/include/linux/pcs-lynx.h index 7958cccd16f2..a95801337205 100644 --- a/include/linux/pcs-lynx.h +++ b/include/linux/pcs-lynx.h @@ -6,12 +6,13 @@ #ifndef __LINUX_PCS_LYNX_H #define __LINUX_PCS_LYNX_H =20 -#include -#include +struct device; +struct mii_bus; +struct phylink_pcs; =20 -struct phylink_pcs *lynx_pcs_create_mdiodev(struct mii_bus *bus, int addr); -struct phylink_pcs *lynx_pcs_create_fwnode(struct fwnode_handle *node); - -void lynx_pcs_destroy(struct phylink_pcs *pcs); +struct phylink_pcs *lynx_pcs_create_mdiodev(struct device *dev, + struct mii_bus *bus, int addr); +struct phylink_pcs *lynx_pcs_create_fwnode(struct device *dev, + struct fwnode_handle *node); =20 #endif /* __LINUX_PCS_LYNX_H */ --=20 2.35.1.1320.gc452695387.dirty From nobody Mon Dec 15 01:49:03 2025 Received: from out-183.mta0.migadu.com (out-183.mta0.migadu.com [91.218.175.183]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 88629214209 for ; Fri, 23 May 2025 20:34:43 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=91.218.175.183 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1748032487; cv=none; b=VPGYARbBZ9h87UpCldh2pXRhPBcMinQF3if1utS7gUZaRNzzioKT0W/rbBQhKn7sInwe2iMx9gDFtltWrRToSI3wVk2+hBEYClj1lGUpsc0/YNqB92cWfu+pd52VaS/JMU6+Dm9XIAIJ4BDT7IFdDIowHmXzwl4vxzdtOfU3sJQ= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1748032487; c=relaxed/simple; bh=fGWwE5D4WRX2P2/H5uaMi431As3BiGvT/S5gIvS+usI=; h=From:To:Cc:Subject:Date:Message-Id:In-Reply-To:References: MIME-Version; b=OFx99fx8zh8py1dq21uf+MhRgtv0w2B4i3YG/oZ4ku4wy9ZKuTjCjPLBlAiL3pz083KYchWcUqoBGuA03ilGsqeqGRlhEPy7eEqdZvh0pjzV+8GFYOfRlB4iWrdfuqF1Z8Z4+HhsodeJgpW0p42emQ449LgIlkUGjsR+1YEDKwc= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linux.dev; spf=pass smtp.mailfrom=linux.dev; dkim=pass (1024-bit key) header.d=linux.dev header.i=@linux.dev header.b=YPac1HZI; arc=none smtp.client-ip=91.218.175.183 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linux.dev Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=linux.dev Authentication-Results: smtp.subspace.kernel.org; dkim=pass (1024-bit key) header.d=linux.dev header.i=@linux.dev header.b="YPac1HZI" X-Report-Abuse: Please report any abuse attempt to abuse@migadu.com and include these headers. DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linux.dev; s=key1; t=1748032481; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=WHgdvN8pGdQlmLrmjmLACo7dbCy+Vqxp5wQbWuxPAqQ=; b=YPac1HZIGNblV+NBxcoFp4qPhJojjcHgWjXyB09PP6i1b8RZKb8Mc3v6KNbI7d80/0OoyT Ceshz0PJB9GXSpBRNt9ME/TUaigWUN7kHWdUQgQ47qeOYYaZhj6P+aJK1ntt/wViKYg9U3 7216kqrzd1Rv++YnDS9pNg04LHx9h/8= From: Sean Anderson To: netdev@vger.kernel.org, Andrew Lunn , "David S . Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni , Russell King Cc: Lei Wei , Heiner Kallweit , Christian Marangi , Kory Maincent , Simon Horman , Daniel Golle , Vineeth Karumanchi , linux-kernel@vger.kernel.org, Sean Anderson , Michal Simek , Radhey Shyam Pandey , Robert Hancock , linux-arm-kernel@lists.infradead.org Subject: [net-next PATCH v5 06/10] net: pcs: Add Xilinx PCS driver Date: Fri, 23 May 2025 16:33:35 -0400 Message-Id: <20250523203339.1993685-7-sean.anderson@linux.dev> In-Reply-To: <20250523203339.1993685-1-sean.anderson@linux.dev> References: <20250523203339.1993685-1-sean.anderson@linux.dev> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable X-Migadu-Flow: FLOW_OUT Content-Type: text/plain; charset="utf-8" This adds support for the Xilinx 1G/2.5G Ethernet PCS/PMA or SGMII device. This is a soft device which converts between GMII and either SGMII, 1000Base-X, or 2500Base-X. If configured correctly, it can also switch between SGMII and 1000BASE-X at runtime. Thoretically this is also possible for 2500Base-X, but that requires reconfiguring the serdes. The exact capabilities depend on synthesis parameters, so they are read from the devicetree. This device has a c22-compliant PHY interface, so for the most part we can just use the phylink helpers. This device supports an interrupt which is triggered on autonegotiation completion. I'm not sure how useful this is, since we can never detect a link down (in the PCS). This device supports sharing some logic between different implementations of the device. In this case, one device contains the "shared logic" and the clocks are connected to other devices. To coordinate this, one device registers a clock that the other devices can request. The clock is enabled in the probe function by releasing the device from reset. There are no othe software controls, so the clock ops are empty. Later in this series, we will convert the Xilinx AXI Ethernet driver to use this PCS. To help out, we provide a compatibility function to bind this driver in the event the MDIO device has no compatible. Signed-off-by: Sean Anderson --- Changes in v5: - Export get_phy_c22_id when it is used - Expose bind attributes, since there is no issue in doing so - Use MDIO_BUS instead of MDIO_DEVICE Changes in v4: - Re-add documentation for axienet_xilinx_pcs_get that was accidentally removed Changes in v3: - Adjust axienet_xilinx_pcs_get for changes to pcs_find_fwnode API - Call devm_pcs_register instead of devm_pcs_register_provider Changes in v2: - Add support for #pcs-cells - Change compatible to just xlnx,pcs - Drop PCS_ALTERA_TSE which was accidentally added while rebasing - Rework xilinx_pcs_validate to just clear out half-duplex modes instead of constraining modes based on the interface. MAINTAINERS | 6 + drivers/net/pcs/Kconfig | 21 ++ drivers/net/pcs/Makefile | 2 + drivers/net/pcs/pcs-xilinx.c | 484 +++++++++++++++++++++++++++++++++++ drivers/net/phy/phy_device.c | 3 +- include/linux/pcs-xilinx.h | 15 ++ include/linux/phy.h | 1 + 7 files changed, 531 insertions(+), 1 deletion(-) create mode 100644 drivers/net/pcs/pcs-xilinx.c create mode 100644 include/linux/pcs-xilinx.h diff --git a/MAINTAINERS b/MAINTAINERS index f098406db6ff..e8e6d3ac77e6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -26659,6 +26659,12 @@ L: netdev@vger.kernel.org S: Orphan F: drivers/net/ethernet/xilinx/ll_temac* =20 +XILINX PCS DRIVER +M: Sean Anderson +S: Maintained +F: Documentation/devicetree/bindings/net/xilinx,pcs.yaml +F: drivers/net/pcs/pcs-xilinx.c + XILINX PWM DRIVER M: Sean Anderson S: Maintained diff --git a/drivers/net/pcs/Kconfig b/drivers/net/pcs/Kconfig index f274ebffaae3..f18f1d6d0ae5 100644 --- a/drivers/net/pcs/Kconfig +++ b/drivers/net/pcs/Kconfig @@ -51,4 +51,25 @@ config PCS_RZN1_MIIC on RZ/N1 SoCs. This PCS converts MII to RMII/RGMII or can be set in pass-through mode for MII. =20 +config PCS_XILINX + depends on OF + depends on GPIOLIB + depends on COMMON_CLK + depends on PCS + select MDIO_BUS + select PHYLINK + tristate "Xilinx PCS driver" + help + PCS driver for the Xilinx 1G/2.5G Ethernet PCS/PMA or SGMII device. + This device can either act as a PCS+PMA for 1000BASE-X or 2500BASE-X, + or as a GMII-to-SGMII bridge. It can also switch between 1000BASE-X + and SGMII dynamically if configured correctly when synthesized. + Typical applications use this device on an FPGA connected to a GEM or + TEMAC on the GMII side. The other side is typically connected to + on-device gigabit transceivers, off-device SERDES devices using TBI, + or LVDS IO resources directly. + + To compile this driver as a module, choose M here: the module + will be called pcs-xilinx. + endmenu diff --git a/drivers/net/pcs/Makefile b/drivers/net/pcs/Makefile index 35e3324fc26e..347afd91f034 100644 --- a/drivers/net/pcs/Makefile +++ b/drivers/net/pcs/Makefile @@ -10,3 +10,5 @@ obj-$(CONFIG_PCS_XPCS) +=3D pcs_xpcs.o obj-$(CONFIG_PCS_LYNX) +=3D pcs-lynx.o obj-$(CONFIG_PCS_MTK_LYNXI) +=3D pcs-mtk-lynxi.o obj-$(CONFIG_PCS_RZN1_MIIC) +=3D pcs-rzn1-miic.o +obj-$(CONFIG_PCS_ALTERA_TSE) +=3D pcs-altera-tse.o +obj-$(CONFIG_PCS_XILINX) +=3D pcs-xilinx.o diff --git a/drivers/net/pcs/pcs-xilinx.c b/drivers/net/pcs/pcs-xilinx.c new file mode 100644 index 000000000000..2d96b05d7916 --- /dev/null +++ b/drivers/net/pcs/pcs-xilinx.c @@ -0,0 +1,484 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2021-25 Sean Anderson + * + * This is the driver for the Xilinx 1G/2.5G Ethernet PCS/PMA or SGMII Log= iCORE + * IP. A typical setup will look something like + * + * MAC <--GMII--> PCS/PMA <--1000BASE-X--> SFP module (PMD) + * + * The IEEE model mostly describes this device, but the PCS layer has a + * separate sublayer for 8b/10b en/decoding: + * + * - When using a device-specific transceiver (serdes), the serdes handles= 8b/10b + * en/decoding and PMA functions. The IP implements other PCS functions. + * - When using LVDS IO resources, the IP implements PCS and PMA functions, + * including 8b/10b en/decoding and (de)serialization. + * - When using an external serdes (accessed via TBI), the IP implements a= ll + * PCS functions, including 8b/10b en/decoding. + * + * The link to the PMD is not modeled by this driver, except for refclk. I= t is + * assumed that the serdes (if present) needs no configuration, though it + * should be fairly easy to add support. It is also possible to go from SG= MII + * to GMII (PHY mode), but this is not supported. + * + * This driver was written with reference to PG047: + * https://docs.amd.com/r/en-US/pg047-gig-eth-pcs-pma + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "../phy/phy-caps.h" + +/* Vendor-specific MDIO registers */ +#define XILINX_PCS_ANICR 16 /* Auto-Negotiation Interrupt Control Register= */ +#define XILINX_PCS_SSR 17 /* Standard Selection Register */ + +#define XILINX_PCS_ANICR_IE BIT(0) /* Interrupt Enable */ +#define XILINX_PCS_ANICR_IS BIT(1) /* Interrupt Status */ + +#define XILINX_PCS_SSR_SGMII BIT(0) /* Select SGMII standard */ + +/** + * struct xilinx_pcs - Private data for Xilinx PCS devices + * @pcs: The phylink PCS + * @mdiodev: The mdiodevice used to access the PCS + * @refclk: The reference clock for the PMD + * @refclk_out: Optional reference clock for other PCSs using this PCS's s= hared + * logic + * @reset: The reset line for the PCS + * @done: Optional GPIO for reset_done + * @irq: IRQ, or -EINVAL if polling + * @enabled: Set if @pcs.link_change is valid and we can call phylink_pcs_= change() + */ +struct xilinx_pcs { + struct phylink_pcs pcs; + struct clk_hw refclk_out; + struct clk *refclk; + struct gpio_desc *reset, *done; + struct mdio_device *mdiodev; + int irq; + bool enabled; +}; + +static inline struct xilinx_pcs *pcs_to_xilinx(struct phylink_pcs *pcs) +{ + return container_of(pcs, struct xilinx_pcs, pcs); +} + +static irqreturn_t xilinx_pcs_an_irq(int irq, void *dev_id) +{ + struct xilinx_pcs *xp =3D dev_id; + + if (mdiodev_modify_changed(xp->mdiodev, XILINX_PCS_ANICR, + XILINX_PCS_ANICR_IS, 0) <=3D 0) + return IRQ_NONE; + + /* paired with xilinx_pcs_enable/disable; protects xp->pcs->link_change */ + if (smp_load_acquire(&xp->enabled)) + phylink_pcs_change(&xp->pcs, true); + return IRQ_HANDLED; +} + +static int xilinx_pcs_enable(struct phylink_pcs *pcs) +{ + struct xilinx_pcs *xp =3D pcs_to_xilinx(pcs); + struct device *dev =3D &xp->mdiodev->dev; + int ret; + + if (xp->irq < 0) + return 0; + + ret =3D mdiodev_modify(xp->mdiodev, XILINX_PCS_ANICR, 0, + XILINX_PCS_ANICR_IE); + if (ret) + dev_err(dev, "could not clear IRQ enable: %d\n", ret); + else + /* paired with xilinx_pcs_an_irq */ + smp_store_release(&xp->enabled, true); + return ret; +} + +static void xilinx_pcs_disable(struct phylink_pcs *pcs) +{ + struct xilinx_pcs *xp =3D pcs_to_xilinx(pcs); + struct device *dev =3D &xp->mdiodev->dev; + int err; + + if (xp->irq < 0) + return; + + WRITE_ONCE(xp->enabled, false); + /* paired with xilinx_pcs_an_irq */ + smp_wmb(); + + err =3D mdiodev_modify(xp->mdiodev, XILINX_PCS_ANICR, + XILINX_PCS_ANICR_IE, 0); + if (err) + dev_err(dev, "could not clear IRQ enable: %d\n", err); +} + +static __ETHTOOL_DECLARE_LINK_MODE_MASK(half_duplex) __ro_after_init; + +static int xilinx_pcs_validate(struct phylink_pcs *pcs, + unsigned long *supported, + const struct phylink_link_state *state) +{ + linkmode_andnot(supported, supported, half_duplex); + return 0; +} + +static void xilinx_pcs_get_state(struct phylink_pcs *pcs, + unsigned int neg_mode, + struct phylink_link_state *state) +{ + struct xilinx_pcs *xp =3D pcs_to_xilinx(pcs); + + phylink_mii_c22_pcs_get_state(xp->mdiodev, neg_mode, state); +} + +static int xilinx_pcs_config(struct phylink_pcs *pcs, unsigned int neg_mod= e, + phy_interface_t interface, + const unsigned long *advertising, + bool permit_pause_to_mac) +{ + int ret, changed =3D 0; + struct xilinx_pcs *xp =3D pcs_to_xilinx(pcs); + + if (test_bit(PHY_INTERFACE_MODE_SGMII, pcs->supported_interfaces) && + test_bit(PHY_INTERFACE_MODE_1000BASEX, pcs->supported_interfaces)) { + u16 ssr; + + if (interface =3D=3D PHY_INTERFACE_MODE_SGMII) + ssr =3D XILINX_PCS_SSR_SGMII; + else + ssr =3D 0; + + changed =3D mdiodev_modify_changed(xp->mdiodev, XILINX_PCS_SSR, + XILINX_PCS_SSR_SGMII, ssr); + if (changed < 0) + return changed; + } + + ret =3D phylink_mii_c22_pcs_config(xp->mdiodev, interface, advertising, + neg_mode); + return ret ?: changed; +} + +static void xilinx_pcs_an_restart(struct phylink_pcs *pcs) +{ + struct xilinx_pcs *xp =3D pcs_to_xilinx(pcs); + + phylink_mii_c22_pcs_an_restart(xp->mdiodev); +} + +static void xilinx_pcs_link_up(struct phylink_pcs *pcs, unsigned int mode, + phy_interface_t interface, int speed, int duplex) +{ + int bmcr; + struct xilinx_pcs *xp =3D pcs_to_xilinx(pcs); + + if (phylink_autoneg_inband(mode)) + return; + + bmcr =3D mdiodev_read(xp->mdiodev, MII_BMCR); + if (bmcr < 0) { + dev_err(&xp->mdiodev->dev, "could not read BMCR (err=3D%d)\n", + bmcr); + return; + } + + bmcr &=3D ~(BMCR_SPEED1000 | BMCR_SPEED100); + switch (speed) { + case SPEED_2500: + case SPEED_1000: + bmcr |=3D BMCR_SPEED1000; + break; + case SPEED_100: + bmcr |=3D BMCR_SPEED100; + break; + case SPEED_10: + bmcr |=3D BMCR_SPEED10; + break; + default: + dev_err(&xp->mdiodev->dev, "invalid speed %d\n", speed); + } + + bmcr =3D mdiodev_write(xp->mdiodev, MII_BMCR, bmcr); + if (bmcr < 0) + dev_err(&xp->mdiodev->dev, "could not write BMCR (err=3D%d)\n", + bmcr); +} + +static const struct phylink_pcs_ops xilinx_pcs_ops =3D { + .pcs_validate =3D xilinx_pcs_validate, + .pcs_enable =3D xilinx_pcs_enable, + .pcs_disable =3D xilinx_pcs_disable, + .pcs_get_state =3D xilinx_pcs_get_state, + .pcs_config =3D xilinx_pcs_config, + .pcs_an_restart =3D xilinx_pcs_an_restart, + .pcs_link_up =3D xilinx_pcs_link_up, +}; + +static const struct clk_ops xilinx_pcs_clk_ops =3D { }; + +static const phy_interface_t xilinx_pcs_interfaces[] =3D { + PHY_INTERFACE_MODE_SGMII, + PHY_INTERFACE_MODE_1000BASEX, + PHY_INTERFACE_MODE_2500BASEX, +}; + +static int xilinx_pcs_probe(struct mdio_device *mdiodev) +{ + struct device *dev =3D &mdiodev->dev; + struct fwnode_handle *fwnode =3D dev->fwnode; + int ret, i, j, mode_count; + struct xilinx_pcs *xp; + const char **modes; + u32 phy_id; + + xp =3D devm_kzalloc(dev, sizeof(*xp), GFP_KERNEL); + if (!xp) + return -ENOMEM; + xp->mdiodev =3D mdiodev; + dev_set_drvdata(dev, xp); + + xp->irq =3D fwnode_irq_get_byname(fwnode, "an"); + /* There's no _optional variant, so this is the best we've got */ + if (xp->irq < 0 && xp->irq !=3D -EINVAL) + return dev_err_probe(dev, xp->irq, "could not get IRQ\n"); + + mode_count =3D fwnode_property_string_array_count(fwnode, + "xlnx,pcs-modes"); + if (!mode_count) + mode_count =3D -ENODATA; + if (mode_count < 0) { + dev_err(dev, "could not read xlnx,pcs-modes: %d", mode_count); + return mode_count; + } + + modes =3D kcalloc(mode_count, sizeof(*modes), GFP_KERNEL); + if (!modes) + return -ENOMEM; + + ret =3D fwnode_property_read_string_array(fwnode, "xlnx,pcs-modes", + modes, mode_count); + if (ret < 0) { + dev_err(dev, "could not read xlnx,pcs-modes: %d\n", ret); + kfree(modes); + return ret; + } + + for (i =3D 0; i < mode_count; i++) { + for (j =3D 0; j < ARRAY_SIZE(xilinx_pcs_interfaces); j++) { + if (!strcmp(phy_modes(xilinx_pcs_interfaces[j]), modes[i])) { + __set_bit(xilinx_pcs_interfaces[j], + xp->pcs.supported_interfaces); + goto next; + } + } + + dev_err(dev, "invalid pcs-mode \"%s\"\n", modes[i]); + kfree(modes); + return -EINVAL; +next: + } + + kfree(modes); + if ((test_bit(PHY_INTERFACE_MODE_SGMII, xp->pcs.supported_interfaces) || + test_bit(PHY_INTERFACE_MODE_1000BASEX, xp->pcs.supported_interfaces)= ) && + test_bit(PHY_INTERFACE_MODE_2500BASEX, xp->pcs.supported_interfaces))= { + dev_err(dev, + "Switching from SGMII or 1000Base-X to 2500Base-X not supported\n"); + return -EINVAL; + } + + xp->reset =3D devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(xp->reset)) + return dev_err_probe(dev, PTR_ERR(xp->reset), + "could not get reset gpio\n"); + + xp->done =3D devm_gpiod_get_optional(dev, "done", GPIOD_IN); + if (IS_ERR(xp->done)) + return dev_err_probe(dev, PTR_ERR(xp->done), + "could not get done gpio\n"); + + xp->refclk =3D devm_clk_get_optional_enabled(dev, "refclk"); + if (IS_ERR(xp->refclk)) + return dev_err_probe(dev, PTR_ERR(xp->refclk), + "could not get/enable reference clock\n"); + + gpiod_set_value_cansleep(xp->reset, 0); + if (xp->done) { + if (read_poll_timeout(gpiod_get_value_cansleep, ret, ret, 1000, + 100000, true, xp->done)) + return dev_err_probe(dev, -ETIMEDOUT, + "timed out waiting for reset\n"); + } else { + /* Just wait for a while and hope we're done */ + usleep_range(50000, 100000); + } + + if (fwnode_property_present(fwnode, "#clock-cells")) { + const char *parent =3D "refclk"; + struct clk_init_data init =3D { + .name =3D fwnode_get_name(fwnode), + .ops =3D &xilinx_pcs_clk_ops, + .parent_names =3D &parent, + .num_parents =3D 1, + .flags =3D 0, + }; + + xp->refclk_out.init =3D &init; + ret =3D devm_clk_hw_register(dev, &xp->refclk_out); + if (ret) + return dev_err_probe(dev, ret, + "could not register refclk\n"); + + ret =3D devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get, + &xp->refclk_out); + if (ret) + return dev_err_probe(dev, ret, + "could not register refclk\n"); + } + + /* Sanity check */ + ret =3D get_phy_c22_id(mdiodev->bus, mdiodev->addr, &phy_id); + if (ret) + return dev_err_probe(dev, ret, "could not read id\n"); + if ((phy_id & 0xfffffff0) !=3D 0x01740c00) + dev_warn(dev, "unknown phy id %x\n", phy_id); + + if (xp->irq < 0) { + xp->pcs.poll =3D true; + } else { + /* The IRQ is enabled by default; turn it off */ + ret =3D mdiodev_write(xp->mdiodev, XILINX_PCS_ANICR, 0); + if (ret) { + dev_err(dev, "could not disable IRQ: %d\n", ret); + return ret; + } + + /* Some PCSs have a bad habit of re-enabling their IRQ! + * Request the IRQ in probe so we don't end up triggering the + * spurious IRQ logic. + */ + ret =3D devm_request_threaded_irq(dev, xp->irq, NULL, xilinx_pcs_an_irq, + IRQF_SHARED | IRQF_ONESHOT, + dev_name(dev), xp); + if (ret) { + dev_err(dev, "could not request IRQ: %d\n", ret); + return ret; + } + } + + xp->pcs.ops =3D &xilinx_pcs_ops; + ret =3D devm_pcs_register(dev, &xp->pcs); + if (ret) + return dev_err_probe(dev, ret, "could not register PCS\n"); + + if (xp->irq < 0) + dev_info(dev, "probed with irq=3Dpoll\n"); + else + dev_info(dev, "probed with irq=3D%d\n", xp->irq); + return 0; +} + +static const struct of_device_id xilinx_pcs_of_match[] =3D { + { .compatible =3D "xlnx,pcs", }, + {}, +}; +MODULE_DEVICE_TABLE(of, xilinx_pcs_of_match); + +static struct mdio_driver xilinx_pcs_driver =3D { + .probe =3D xilinx_pcs_probe, + .mdiodrv.driver =3D { + .name =3D "xilinx-pcs", + .of_match_table =3D of_match_ptr(xilinx_pcs_of_match), + }, +}; + +static int __init xilinx_pcs_init(void) +{ + phy_caps_linkmodes(LINK_CAPA_10HD | LINK_CAPA_100HD | LINK_CAPA_1000HD, + half_duplex); + return mdio_driver_register(&xilinx_pcs_driver); +} +module_init(xilinx_pcs_init); + +static void __exit xilinx_pcs_exit(void) +{ + mdio_driver_unregister(&xilinx_pcs_driver); +} +module_exit(xilinx_pcs_exit) + +static int axienet_xilinx_pcs_fixup(struct of_changeset *ocs, + struct device_node *np, void *data) +{ +#ifdef CONFIG_OF_DYNAMIC + unsigned int interface, mode_count, mode =3D 0; + const unsigned long *interfaces =3D data; + const char **modes; + int ret; + + mode_count =3D bitmap_weight(interfaces, PHY_INTERFACE_MODE_MAX); + WARN_ON_ONCE(!mode_count); + modes =3D kcalloc(mode_count, sizeof(*modes), GFP_KERNEL); + if (!modes) + return -ENOMEM; + + for_each_set_bit(interface, interfaces, PHY_INTERFACE_MODE_MAX) + modes[mode++] =3D phy_modes(interface); + ret =3D of_changeset_add_prop_string_array(ocs, np, "xlnx,pcs-modes", + modes, mode_count); + kfree(modes); + if (ret) + return ret; + + return of_changeset_add_prop_string(ocs, np, "compatible", "xlnx,pcs"); +#else + return -ENODEV; +#endif +} + +/** + * axienet_xilinx_pcs_get() - Compatibility function for the AXI Ethernet = driver + * @dev: The MAC device + * @interfaces: The interfaces to use as a fallback + * + * This is a helper function for the AXI Ethernet driver to ensure backwar= ds + * compatibility with device trees which do not include compatible strings= for + * the PCS. It should not be used by new code. + * + * Return: a PCS, or an error pointer + */ +struct phylink_pcs *axienet_xilinx_pcs_get(struct device *dev, + const unsigned long *interfaces) +{ + struct fwnode_handle *fwnode; + struct phylink_pcs *pcs; + + fwnode =3D pcs_find_fwnode(dev_fwnode(dev), NULL, "phy-handle", false); + if (IS_ERR(fwnode)) + return ERR_CAST(fwnode); + + pcs =3D pcs_get_by_fwnode_compat(dev, fwnode, axienet_xilinx_pcs_fixup, + (void *)interfaces); + fwnode_handle_put(fwnode); + return pcs; +} +EXPORT_SYMBOL_GPL(axienet_xilinx_pcs_get); + +MODULE_ALIAS("platform:xilinx-pcs"); +MODULE_DESCRIPTION("Xilinx PCS driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 0f6f86252622..3b57d18ebbed 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -921,7 +921,7 @@ static int get_phy_c45_ids(struct mii_bus *bus, int add= r, * valid, %-EIO on bus access error, or %-ENODEV if no device responds * or invalid ID. */ -static int get_phy_c22_id(struct mii_bus *bus, int addr, u32 *phy_id) +int get_phy_c22_id(struct mii_bus *bus, int addr, u32 *phy_id) { int phy_reg; =20 @@ -949,6 +949,7 @@ static int get_phy_c22_id(struct mii_bus *bus, int addr= , u32 *phy_id) =20 return 0; } +EXPORT_SYMBOL_GPL(get_phy_c22_id); =20 /* Extract the phy ID from the compatible string of the form * ethernet-phy-idAAAA.BBBB. diff --git a/include/linux/pcs-xilinx.h b/include/linux/pcs-xilinx.h new file mode 100644 index 000000000000..28ff65226c3c --- /dev/null +++ b/include/linux/pcs-xilinx.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2024 Sean Anderson + */ + +#ifndef PCS_XILINX_H +#define PCS_XILINX_H + +struct device; +struct phylink_pcs; + +struct phylink_pcs *axienet_xilinx_pcs_get(struct device *dev, + const unsigned long *interfaces); + +#endif /* PCS_XILINX_H */ diff --git a/include/linux/phy.h b/include/linux/phy.h index 32b9da274115..4e6a619e5bf9 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -1754,6 +1754,7 @@ int phy_modify_paged(struct phy_device *phydev, int p= age, u32 regnum, struct phy_device *phy_device_create(struct mii_bus *bus, int addr, u32 ph= y_id, bool is_c45, struct phy_c45_device_ids *c45_ids); +int get_phy_c22_id(struct mii_bus *bus, int addr, u32 *phy_id); int fwnode_get_phy_id(struct fwnode_handle *fwnode, u32 *phy_id); struct mdio_device *fwnode_mdio_find_device(struct fwnode_handle *fwnode); struct phy_device *fwnode_phy_find_device(struct fwnode_handle *phy_fwnode= ); --=20 2.35.1.1320.gc452695387.dirty From nobody Mon Dec 15 01:49:03 2025 Received: from out-185.mta0.migadu.com (out-185.mta0.migadu.com [91.218.175.185]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id C82BA20D4E2 for ; Fri, 23 May 2025 20:34:46 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=91.218.175.185 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1748032488; cv=none; b=PqFfPFK6nBkt0EAxRoMD/+483RCqOoHVCfz3UDcqcXsQqe5ud6liflstpGJNaoAbnLmZRrg21oyR7PaaDneyZ8IT4KyvTzDsxOQ8LsD/QVKjOIpWckf0uD9axxGuKv3YgvwY8dkxPtjAAjZy12dT1NLAn2uqat18svuieoV7qSs= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1748032488; c=relaxed/simple; bh=gwYVXcsLp4wHnH19UhUoo2Qb5PuGznDntDVTA9rvJsA=; h=From:To:Cc:Subject:Date:Message-Id:In-Reply-To:References: MIME-Version; b=Mjj5MR9z3nvEFTsQInoa4AibtsgCThlSw1knVoIxcSqBHXlw0ZRaQpmG3wHOheYMh05HDg6eqp0aE2QtoZqyYuWCDdFWIXKs0xuD56RTZ/bG7gzgFtrwSpq5DmTuJ/v/5oS6S/IE+4ODhfyWa/V0knEZG5MPpIKmmABovS77ug8= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linux.dev; spf=pass smtp.mailfrom=linux.dev; dkim=pass (1024-bit key) header.d=linux.dev header.i=@linux.dev header.b=tViBMs4U; arc=none smtp.client-ip=91.218.175.185 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linux.dev Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=linux.dev Authentication-Results: smtp.subspace.kernel.org; dkim=pass (1024-bit key) header.d=linux.dev header.i=@linux.dev header.b="tViBMs4U" X-Report-Abuse: Please report any abuse attempt to abuse@migadu.com and include these headers. DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linux.dev; s=key1; t=1748032484; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=wxvxXAo/wUzHt35s9ScZXGgLzh2ZPeVqFegmP4eQ8mw=; b=tViBMs4UlMXSkGZB65XuZ17RjIsCjhG0x4a8FmNelGHnJX91bQh7nWaX6Cukn9lqIkE9v6 gdaTeo7wOogCzZCZiYk7aW8R5LzpLVX3cMVggMUNsmo2FJaAZ7L3ZBHWbgS6+M5IApQhEE trzaCTB5AcS91ymmX3kCDHII2fivxXg= From: Sean Anderson To: netdev@vger.kernel.org, Andrew Lunn , "David S . Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni , Russell King Cc: Lei Wei , Heiner Kallweit , Christian Marangi , Kory Maincent , Simon Horman , Daniel Golle , Vineeth Karumanchi , linux-kernel@vger.kernel.org, Sean Anderson , Suraj Gupta , Michal Simek , Radhey Shyam Pandey , Robert Hancock , linux-arm-kernel@lists.infradead.org Subject: [net-next PATCH v5 07/10] net: axienet: Convert to use PCS subsystem Date: Fri, 23 May 2025 16:33:36 -0400 Message-Id: <20250523203339.1993685-8-sean.anderson@linux.dev> In-Reply-To: <20250523203339.1993685-1-sean.anderson@linux.dev> References: <20250523203339.1993685-1-sean.anderson@linux.dev> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable X-Migadu-Flow: FLOW_OUT Content-Type: text/plain; charset="utf-8" Convert the AXI Ethernet driver to use the PCS subsystem, including the new Xilinx PCA/PMA driver. Unfortunately, we must use a helper to work with bare MDIO nodes without a compatible. Signed-off-by: Sean Anderson Reviewed-by: Suraj Gupta Tested-by: Suraj Gupta --- Changes in v5: - Use MDIO_BUS instead of MDIO_DEVICE Changes in v4: - Convert to dev-less pcs_put Changes in v3: - Select PCS_XILINX unconditionally drivers/net/ethernet/xilinx/Kconfig | 7 ++ drivers/net/ethernet/xilinx/xilinx_axienet.h | 4 +- .../net/ethernet/xilinx/xilinx_axienet_main.c | 104 ++++-------------- 3 files changed, 28 insertions(+), 87 deletions(-) diff --git a/drivers/net/ethernet/xilinx/Kconfig b/drivers/net/ethernet/xil= inx/Kconfig index 7502214cc7d5..5381c3915e95 100644 --- a/drivers/net/ethernet/xilinx/Kconfig +++ b/drivers/net/ethernet/xilinx/Kconfig @@ -25,8 +25,15 @@ config XILINX_EMACLITE =20 config XILINX_AXI_EMAC tristate "Xilinx 10/100/1000 AXI Ethernet support" + depends on COMMON_CLK + depends on GPIOLIB depends on HAS_IOMEM + depends on OF + depends on PCS depends on XILINX_DMA + select MDIO_BUS + select OF_DYNAMIC + select PCS_XILINX select PHYLINK select DIMLIB help diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet.h b/drivers/net/eth= ernet/xilinx/xilinx_axienet.h index 5ff742103beb..f46e862245eb 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet.h +++ b/drivers/net/ethernet/xilinx/xilinx_axienet.h @@ -473,7 +473,6 @@ struct skbuf_dma_descriptor { * @dev: Pointer to device structure * @phylink: Pointer to phylink instance * @phylink_config: phylink configuration settings - * @pcs_phy: Reference to PCS/PMA PHY if used * @pcs: phylink pcs structure for PCS PHY * @switch_x_sgmii: Whether switchable 1000BaseX/SGMII mode is enabled in = the core * @axi_clk: AXI4-Lite bus clock @@ -553,8 +552,7 @@ struct axienet_local { struct phylink *phylink; struct phylink_config phylink_config; =20 - struct mdio_device *pcs_phy; - struct phylink_pcs pcs; + struct phylink_pcs *pcs; =20 bool switch_x_sgmii; =20 diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/ne= t/ethernet/xilinx/xilinx_axienet_main.c index 1b7a653c1f4e..588032ff5b6f 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c @@ -35,6 +35,8 @@ #include #include #include +#include +#include #include #include #include @@ -2519,63 +2521,6 @@ static const struct ethtool_ops axienet_ethtool_ops = =3D { .get_rmon_stats =3D axienet_ethtool_get_rmon_stats, }; =20 -static struct axienet_local *pcs_to_axienet_local(struct phylink_pcs *pcs) -{ - return container_of(pcs, struct axienet_local, pcs); -} - -static void axienet_pcs_get_state(struct phylink_pcs *pcs, - unsigned int neg_mode, - struct phylink_link_state *state) -{ - struct mdio_device *pcs_phy =3D pcs_to_axienet_local(pcs)->pcs_phy; - - phylink_mii_c22_pcs_get_state(pcs_phy, neg_mode, state); -} - -static void axienet_pcs_an_restart(struct phylink_pcs *pcs) -{ - struct mdio_device *pcs_phy =3D pcs_to_axienet_local(pcs)->pcs_phy; - - phylink_mii_c22_pcs_an_restart(pcs_phy); -} - -static int axienet_pcs_config(struct phylink_pcs *pcs, unsigned int neg_mo= de, - phy_interface_t interface, - const unsigned long *advertising, - bool permit_pause_to_mac) -{ - struct mdio_device *pcs_phy =3D pcs_to_axienet_local(pcs)->pcs_phy; - struct net_device *ndev =3D pcs_to_axienet_local(pcs)->ndev; - struct axienet_local *lp =3D netdev_priv(ndev); - int ret; - - if (lp->switch_x_sgmii) { - ret =3D mdiodev_write(pcs_phy, XLNX_MII_STD_SELECT_REG, - interface =3D=3D PHY_INTERFACE_MODE_SGMII ? - XLNX_MII_STD_SELECT_SGMII : 0); - if (ret < 0) { - netdev_warn(ndev, - "Failed to switch PHY interface: %d\n", - ret); - return ret; - } - } - - ret =3D phylink_mii_c22_pcs_config(pcs_phy, interface, advertising, - neg_mode); - if (ret < 0) - netdev_warn(ndev, "Failed to configure PCS: %d\n", ret); - - return ret; -} - -static const struct phylink_pcs_ops axienet_pcs_ops =3D { - .pcs_get_state =3D axienet_pcs_get_state, - .pcs_config =3D axienet_pcs_config, - .pcs_an_restart =3D axienet_pcs_an_restart, -}; - static struct phylink_pcs *axienet_mac_select_pcs(struct phylink_config *c= onfig, phy_interface_t interface) { @@ -2583,8 +2528,8 @@ static struct phylink_pcs *axienet_mac_select_pcs(str= uct phylink_config *config, struct axienet_local *lp =3D netdev_priv(ndev); =20 if (interface =3D=3D PHY_INTERFACE_MODE_1000BASEX || - interface =3D=3D PHY_INTERFACE_MODE_SGMII) - return &lp->pcs; + interface =3D=3D PHY_INTERFACE_MODE_SGMII) + return lp->pcs; =20 return NULL; } @@ -3056,28 +3001,23 @@ static int axienet_probe(struct platform_device *pd= ev) =20 if (lp->phy_mode =3D=3D PHY_INTERFACE_MODE_SGMII || lp->phy_mode =3D=3D PHY_INTERFACE_MODE_1000BASEX) { - np =3D of_parse_phandle(pdev->dev.of_node, "pcs-handle", 0); - if (!np) { - /* Deprecated: Always use "pcs-handle" for pcs_phy. - * Falling back to "phy-handle" here is only for - * backward compatibility with old device trees. - */ - np =3D of_parse_phandle(pdev->dev.of_node, "phy-handle", 0); - } - if (!np) { - dev_err(&pdev->dev, "pcs-handle (preferred) or phy-handle required for = 1000BaseX/SGMII\n"); - ret =3D -EINVAL; - goto cleanup_mdio; - } - lp->pcs_phy =3D of_mdio_find_device(np); - if (!lp->pcs_phy) { - ret =3D -EPROBE_DEFER; - of_node_put(np); + DECLARE_PHY_INTERFACE_MASK(interfaces); + + phy_interface_zero(interfaces); + if (lp->switch_x_sgmii || + lp->phy_mode =3D=3D PHY_INTERFACE_MODE_SGMII) + __set_bit(PHY_INTERFACE_MODE_SGMII, interfaces); + if (lp->switch_x_sgmii || + lp->phy_mode =3D=3D PHY_INTERFACE_MODE_1000BASEX) + __set_bit(PHY_INTERFACE_MODE_1000BASEX, interfaces); + + lp->pcs =3D axienet_xilinx_pcs_get(&pdev->dev, interfaces); + if (IS_ERR(lp->pcs)) { + ret =3D PTR_ERR(lp->pcs); + dev_err_probe(&pdev->dev, ret, + "could not get PCS for 1000BASE-X/SGMII\n"); goto cleanup_mdio; } - of_node_put(np); - lp->pcs.ops =3D &axienet_pcs_ops; - lp->pcs.poll =3D true; } =20 lp->phylink_config.dev =3D &ndev->dev; @@ -3115,8 +3055,6 @@ static int axienet_probe(struct platform_device *pdev) phylink_destroy(lp->phylink); =20 cleanup_mdio: - if (lp->pcs_phy) - put_device(&lp->pcs_phy->dev); if (lp->mii_bus) axienet_mdio_teardown(lp); cleanup_clk: @@ -3139,9 +3077,7 @@ static void axienet_remove(struct platform_device *pd= ev) if (lp->phylink) phylink_destroy(lp->phylink); =20 - if (lp->pcs_phy) - put_device(&lp->pcs_phy->dev); - + pcs_put(lp->pcs); axienet_mdio_teardown(lp); =20 clk_bulk_disable_unprepare(XAE_NUM_MISC_CLOCKS, lp->misc_clks); --=20 2.35.1.1320.gc452695387.dirty From nobody Mon Dec 15 01:49:03 2025 Received: from out-177.mta0.migadu.com (out-177.mta0.migadu.com [91.218.175.177]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 7178C217668; Fri, 23 May 2025 20:34:49 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=91.218.175.177 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1748032491; cv=none; b=d2mIm6gJStzWMAtmK+xjBdm9uxzdAmuqXmw3C3PwlnKUWh9Q9AluFvThr5bVxOgQqKu03kdOVd8RaaGVO8F+2wzjbWq/ZF07rGtBajViHjRYMr9AkjbilTPvXZ54+ef0Q2Zhu2PupZzXMR1Erd46CKtBhRXf6fFgSt7qKJ5W2q4= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1748032491; c=relaxed/simple; bh=MJLjIswkz5DBHXAGeKAB9MEQvDlHhVhrUYQV+dGM0sg=; h=From:To:Cc:Subject:Date:Message-Id:In-Reply-To:References: MIME-Version; b=FIY6v/H7sB0JPWv4Ko06Gjs9xDkjU1a3XRnk6s16sEt47uqpzk6INQZy/+xqRl7GXcmu+3frf4vHqigR5oQNFpZUStS32EeW4StxCUyk2zbowfByATb7rj5OCSmjHA1/iwGbMaZ1yJxUtj6LTMSKTc5kLdVJutYDnKMOzPTmdJg= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linux.dev; spf=pass smtp.mailfrom=linux.dev; dkim=pass (1024-bit key) header.d=linux.dev header.i=@linux.dev header.b=BZMR9PAg; arc=none smtp.client-ip=91.218.175.177 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linux.dev Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=linux.dev Authentication-Results: smtp.subspace.kernel.org; dkim=pass (1024-bit key) header.d=linux.dev header.i=@linux.dev header.b="BZMR9PAg" X-Report-Abuse: Please report any abuse attempt to abuse@migadu.com and include these headers. DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linux.dev; s=key1; t=1748032487; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=bmMf5ff8Lbqwd66FtKObP9wZ01LxPu3TvS0fQ9LjtvU=; b=BZMR9PAgLauOAFbJqN/XfqjRtyANXQQXwYRfzIkRgonDuslTA/ZnIZAg9eWvZSj4QFn5kZ Ovw1XMKYbaaR+DyUuIzRj9Mb0Ct+XsnMbwxyrIcHTTRwi7Hb9XEJK+vZseeERjkanIewFX KzGUxe5gcmkeAUGXulAKwztjMV9is+4= From: Sean Anderson To: netdev@vger.kernel.org, Andrew Lunn , "David S . Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni , Russell King Cc: Lei Wei , Heiner Kallweit , Christian Marangi , Kory Maincent , Simon Horman , Daniel Golle , Vineeth Karumanchi , linux-kernel@vger.kernel.org, Sean Anderson , Claudiu Beznea , Nicolas Ferre Subject: [net-next PATCH v5 08/10] net: macb: Move most of mac_config to mac_prepare Date: Fri, 23 May 2025 16:33:37 -0400 Message-Id: <20250523203339.1993685-9-sean.anderson@linux.dev> In-Reply-To: <20250523203339.1993685-1-sean.anderson@linux.dev> References: <20250523203339.1993685-1-sean.anderson@linux.dev> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable X-Migadu-Flow: FLOW_OUT Content-Type: text/plain; charset="utf-8" mac_prepare is called every time the interface is changed, so we can do all of our configuration there, instead of in mac_config. This will be useful for the next patch where we will set the PCS bit based on whether we are using our internal PCS. No functional change intended. Signed-off-by: Sean Anderson --- (no changes since v2) Changes in v2: - Fix docs for macb_pcs_config_an - Include change to macb_pcs_get_state which was previously in the next patch drivers/net/ethernet/cadence/macb_main.c | 209 ++++++++++++++--------- 1 file changed, 132 insertions(+), 77 deletions(-) diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/etherne= t/cadence/macb_main.c index e1e8bd2ec155..30591ce8be88 100644 --- a/drivers/net/ethernet/cadence/macb_main.c +++ b/drivers/net/ethernet/cadence/macb_main.c @@ -549,19 +549,91 @@ static void macb_set_tx_clk(struct macb *bp, int spee= d) netdev_err(bp->dev, "adjusting tx_clk failed.\n"); } =20 -static void macb_usx_pcs_link_up(struct phylink_pcs *pcs, unsigned int neg= _mode, - phy_interface_t interface, int speed, - int duplex) -{ - struct macb *bp =3D container_of(pcs, struct macb, phylink_usx_pcs); - u32 config; - - config =3D gem_readl(bp, USX_CONTROL); - config =3D GEM_BFINS(SERDES_RATE, MACB_SERDES_RATE_10G, config); - config =3D GEM_BFINS(USX_CTRL_SPEED, HS_SPEED_10000M, config); - config &=3D ~(GEM_BIT(TX_SCR_BYPASS) | GEM_BIT(RX_SCR_BYPASS)); - config |=3D GEM_BIT(TX_EN); - gem_writel(bp, USX_CONTROL, config); +static void macb_pcs_get_state(struct phylink_pcs *pcs, unsigned int neg_m= ode, + struct phylink_link_state *state) +{ + struct macb *bp =3D container_of(pcs, struct macb, phylink_sgmii_pcs); + + phylink_mii_c22_pcs_decode_state(state, neg_mode, gem_readl(bp, PCSSTS), + gem_readl(bp, PCSANLPBASE)); +} + +/** + * macb_pcs_config_an() - Configure autonegotiation settings for PCSs + * @bp: The macb to operate on + * @neg_mode: The autonegotiation mode + * @interface: The interface to use + * @advertising: The advertisement mask + * + * This provides common configuration for PCS autonegotiation. + * + * Context: Call with @bp->lock held. + * Return: 1 if any registers were changed; 0 otherwise + */ +static int macb_pcs_config_an(struct macb *bp, unsigned int neg_mode, + phy_interface_t interface, + const unsigned long *advertising) +{ + bool changed =3D false; + int old, new; + + old =3D gem_readl(bp, PCSANADV); + new =3D phylink_mii_c22_pcs_encode_advertisement(interface, advertising); + if (new !=3D -EINVAL && old !=3D new) { + changed =3D true; + gem_writel(bp, PCSANADV, new); + } + + old =3D new =3D gem_readl(bp, PCSCNTRL); + if (neg_mode =3D=3D PHYLINK_PCS_NEG_INBAND_ENABLED) + new |=3D BMCR_ANENABLE; + else + new &=3D ~BMCR_ANENABLE; + if (old !=3D new) { + changed =3D true; + gem_writel(bp, PCSCNTRL, new); + } + return changed; +} + +static int macb_pcs_config(struct phylink_pcs *pcs, unsigned int mode, + phy_interface_t interface, + const unsigned long *advertising, + bool permit_pause_to_mac) +{ + struct macb *bp =3D container_of(pcs, struct macb, phylink_sgmii_pcs); + bool changed =3D false; + unsigned long flags; + u32 old, new; + + spin_lock_irqsave(&bp->lock, flags); + old =3D new =3D gem_readl(bp, NCFGR); + new |=3D GEM_BIT(SGMIIEN); + if (old !=3D new) { + changed =3D true; + gem_writel(bp, NCFGR, new); + } + + if (macb_pcs_config_an(bp, mode, interface, advertising)) + changed =3D true; + + spin_unlock_irqrestore(&bp->lock, flags); + return changed; +} + +static void macb_pcs_an_restart(struct phylink_pcs *pcs) +{ + struct macb *bp =3D container_of(pcs, struct macb, phylink_sgmii_pcs); + u32 bmcr; + unsigned long flags; + + spin_lock_irqsave(&bp->lock, flags); + + bmcr =3D gem_readl(bp, PCSCNTRL); + bmcr |=3D BMCR_ANENABLE; + gem_writel(bp, PCSCNTRL, bmcr); + + spin_lock_irqsave(&bp->lock, flags); } =20 static void macb_usx_pcs_get_state(struct phylink_pcs *pcs, @@ -589,45 +661,60 @@ static int macb_usx_pcs_config(struct phylink_pcs *pc= s, bool permit_pause_to_mac) { struct macb *bp =3D container_of(pcs, struct macb, phylink_usx_pcs); + unsigned long flags; + bool changed; + u16 old, new; =20 - gem_writel(bp, USX_CONTROL, gem_readl(bp, USX_CONTROL) | - GEM_BIT(SIGNAL_OK)); + spin_lock_irqsave(&bp->lock, flags); + if (macb_pcs_config_an(bp, neg_mode, interface, advertising)) + changed =3D true; =20 - return 0; -} + old =3D new =3D gem_readl(bp, USX_CONTROL); + new |=3D GEM_BIT(SIGNAL_OK); + if (old !=3D new) { + changed =3D true; + gem_writel(bp, USX_CONTROL, new); + } =20 -static void macb_pcs_get_state(struct phylink_pcs *pcs, unsigned int neg_m= ode, - struct phylink_link_state *state) -{ - state->link =3D 0; -} + old =3D new =3D gem_readl(bp, USX_CONTROL); + new =3D GEM_BFINS(SERDES_RATE, MACB_SERDES_RATE_10G, new); + new =3D GEM_BFINS(USX_CTRL_SPEED, HS_SPEED_10000M, new); + new &=3D ~(GEM_BIT(TX_SCR_BYPASS) | GEM_BIT(RX_SCR_BYPASS)); + new |=3D GEM_BIT(TX_EN); + if (old !=3D new) { + changed =3D true; + gem_writel(bp, USX_CONTROL, new); + } =20 -static void macb_pcs_an_restart(struct phylink_pcs *pcs) -{ - /* Not supported */ -} - -static int macb_pcs_config(struct phylink_pcs *pcs, - unsigned int neg_mode, - phy_interface_t interface, - const unsigned long *advertising, - bool permit_pause_to_mac) -{ - return 0; + spin_unlock_irqrestore(&bp->lock, flags); + return changed; } =20 static const struct phylink_pcs_ops macb_phylink_usx_pcs_ops =3D { .pcs_get_state =3D macb_usx_pcs_get_state, .pcs_config =3D macb_usx_pcs_config, - .pcs_link_up =3D macb_usx_pcs_link_up, }; =20 static const struct phylink_pcs_ops macb_phylink_pcs_ops =3D { .pcs_get_state =3D macb_pcs_get_state, - .pcs_an_restart =3D macb_pcs_an_restart, .pcs_config =3D macb_pcs_config, + .pcs_an_restart =3D macb_pcs_an_restart, }; =20 +static struct phylink_pcs *macb_mac_select_pcs(struct phylink_config *conf= ig, + phy_interface_t interface) +{ + struct net_device *ndev =3D to_net_dev(config->dev); + struct macb *bp =3D netdev_priv(ndev); + + if (interface =3D=3D PHY_INTERFACE_MODE_10GBASER) + return &bp->phylink_usx_pcs; + else if (interface =3D=3D PHY_INTERFACE_MODE_SGMII) + return &bp->phylink_sgmii_pcs; + else + return NULL; +} + static void macb_mac_config(struct phylink_config *config, unsigned int mo= de, const struct phylink_link_state *state) { @@ -646,18 +733,14 @@ static void macb_mac_config(struct phylink_config *co= nfig, unsigned int mode, if (state->interface =3D=3D PHY_INTERFACE_MODE_RMII) ctrl |=3D MACB_BIT(RM9200_RMII); } else if (macb_is_gem(bp)) { - ctrl &=3D ~(GEM_BIT(SGMIIEN) | GEM_BIT(PCSSEL)); - ncr &=3D ~GEM_BIT(ENABLE_HS_MAC); - - if (state->interface =3D=3D PHY_INTERFACE_MODE_SGMII) { - ctrl |=3D GEM_BIT(SGMIIEN) | GEM_BIT(PCSSEL); - } else if (state->interface =3D=3D PHY_INTERFACE_MODE_10GBASER) { + if (macb_mac_select_pcs(config, state->interface)) ctrl |=3D GEM_BIT(PCSSEL); - ncr |=3D GEM_BIT(ENABLE_HS_MAC); - } else if (bp->caps & MACB_CAPS_MIIONRGMII && - bp->phy_interface =3D=3D PHY_INTERFACE_MODE_MII) { + else + ctrl &=3D ~GEM_BIT(PCSSEL); + + if (bp->caps & MACB_CAPS_MIIONRGMII && + bp->phy_interface =3D=3D PHY_INTERFACE_MODE_MII) ncr |=3D MACB_BIT(MIIONRGMII); - } } =20 /* Apply the new configuration, if any */ @@ -667,22 +750,6 @@ static void macb_mac_config(struct phylink_config *con= fig, unsigned int mode, if (old_ncr ^ ncr) macb_or_gem_writel(bp, NCR, ncr); =20 - /* Disable AN for SGMII fixed link configuration, enable otherwise. - * Must be written after PCSSEL is set in NCFGR, - * otherwise writes will not take effect. - */ - if (macb_is_gem(bp) && state->interface =3D=3D PHY_INTERFACE_MODE_SGMII) { - u32 pcsctrl, old_pcsctrl; - - old_pcsctrl =3D gem_readl(bp, PCSCNTRL); - if (mode =3D=3D MLO_AN_FIXED) - pcsctrl =3D old_pcsctrl & ~GEM_BIT(PCSAUTONEG); - else - pcsctrl =3D old_pcsctrl | GEM_BIT(PCSAUTONEG); - if (old_pcsctrl !=3D pcsctrl) - gem_writel(bp, PCSCNTRL, pcsctrl); - } - spin_unlock_irqrestore(&bp->lock, flags); } =20 @@ -735,10 +802,12 @@ static void macb_mac_link_up(struct phylink_config *c= onfig, if (!(bp->caps & MACB_CAPS_MACB_IS_EMAC)) { ctrl &=3D ~MACB_BIT(PAE); if (macb_is_gem(bp)) { - ctrl &=3D ~GEM_BIT(GBE); + ctrl &=3D ~(GEM_BIT(GBE) | GEM_BIT(ENABLE_HS_MAC)); =20 if (speed =3D=3D SPEED_1000) ctrl |=3D GEM_BIT(GBE); + else if (speed =3D=3D SPEED_10000) + ctrl |=3D GEM_BIT(ENABLE_HS_MAC); } =20 if (rx_pause) @@ -776,20 +845,6 @@ static void macb_mac_link_up(struct phylink_config *co= nfig, netif_tx_wake_all_queues(ndev); } =20 -static struct phylink_pcs *macb_mac_select_pcs(struct phylink_config *conf= ig, - phy_interface_t interface) -{ - struct net_device *ndev =3D to_net_dev(config->dev); - struct macb *bp =3D netdev_priv(ndev); - - if (interface =3D=3D PHY_INTERFACE_MODE_10GBASER) - return &bp->phylink_usx_pcs; - else if (interface =3D=3D PHY_INTERFACE_MODE_SGMII) - return &bp->phylink_sgmii_pcs; - else - return NULL; -} - static const struct phylink_mac_ops macb_phylink_ops =3D { .mac_select_pcs =3D macb_mac_select_pcs, .mac_config =3D macb_mac_config, --=20 2.35.1.1320.gc452695387.dirty From nobody Mon Dec 15 01:49:03 2025 Received: from out-172.mta0.migadu.com (out-172.mta0.migadu.com [91.218.175.172]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id B5E5921ABBD; Fri, 23 May 2025 20:34:51 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=91.218.175.172 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1748032493; cv=none; b=tq9VNS3W3K9bgJE8yJ93kyDwqOIvl1tgvH+0OsVMdZ+Ut2o4AqcbI4191L4GhWCdsahhBxelTCw2YjmNI+xmh2sozNNKsBdEvhPeR++qn2T7ba9SG/ziT5i9we4ZTmrHX9sDy4n3i9+t6kJIzh475b0B4Pe9+kG+dCPV/1IGk/0= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1748032493; c=relaxed/simple; bh=Voeku10SRRpAK3a7wYX3w8F5JvBkAbzS8NwPZ78KNt8=; h=From:To:Cc:Subject:Date:Message-Id:In-Reply-To:References: MIME-Version; b=eHadmRh2lIi9nGvKUwYDg9XGCegHW+wEI2co4jL8bxWSQg6q6rVpCg+EDa+ic12W41RzKzUNrNQzwNyUYbVg5pQLuYkadZG/bufpXqx+RFWME7tZiFWg1Rg7I3qvedC581XzPfF4GGq8gcMi1q6/3xt0EfCSAVrWbVIJZPgnQLs= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linux.dev; spf=pass smtp.mailfrom=linux.dev; dkim=pass (1024-bit key) header.d=linux.dev header.i=@linux.dev header.b=oMAp3hCp; arc=none smtp.client-ip=91.218.175.172 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linux.dev Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=linux.dev Authentication-Results: smtp.subspace.kernel.org; dkim=pass (1024-bit key) header.d=linux.dev header.i=@linux.dev header.b="oMAp3hCp" X-Report-Abuse: Please report any abuse attempt to abuse@migadu.com and include these headers. DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linux.dev; s=key1; t=1748032489; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=r1XKemuy6/UrY+NE8ZaaQVwiJse3Wts0PodHIHVO3tk=; b=oMAp3hCpm8XS2Ki0ylJ942GaAlNc56AiVC1ylzCJco5vl+Y1emLMc5Ll5CCOQq2aW3CtWs iBQoG/7DJGfvfRrq+XeoblRf7Y1hZBWb66br1sunsbGGxPnjw3NOqIjG80kWNSpsIQW5cQ RtB0ubOi/u+5JJe2R5lD/1W7m1Ez/HA= From: Sean Anderson To: netdev@vger.kernel.org, Andrew Lunn , "David S . Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni , Russell King Cc: Lei Wei , Heiner Kallweit , Christian Marangi , Kory Maincent , Simon Horman , Daniel Golle , Vineeth Karumanchi , linux-kernel@vger.kernel.org, Sean Anderson , Claudiu Beznea , Nicolas Ferre Subject: [net-next PATCH v5 09/10] net: macb: Support external PCSs Date: Fri, 23 May 2025 16:33:38 -0400 Message-Id: <20250523203339.1993685-10-sean.anderson@linux.dev> In-Reply-To: <20250523203339.1993685-1-sean.anderson@linux.dev> References: <20250523203339.1993685-1-sean.anderson@linux.dev> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable X-Migadu-Flow: FLOW_OUT Content-Type: text/plain; charset="utf-8" This adds support for external PCSs. For example, the Xilinx UltraScale+ processor exposes its GMII interface to the FPGA fabric. This fabric may implement PCS to convert GMII to a serial interface such as SGMII or 1000BASE-X. When present, the external PCS takes precedence over the internal PCSs. Signed-off-by: Sean Anderson --- (no changes since v4) Changes in v4: - Convert to dev-less pcs_put Changes in v2: - Move update to macb_pcs_get_state to previous patch drivers/net/ethernet/cadence/macb.h | 1 + drivers/net/ethernet/cadence/macb_main.c | 26 ++++++++++++++++++++++-- 2 files changed, 25 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cad= ence/macb.h index c9a5c8beb2fa..9d310814f052 100644 --- a/drivers/net/ethernet/cadence/macb.h +++ b/drivers/net/ethernet/cadence/macb.h @@ -1291,6 +1291,7 @@ struct macb { struct phylink_config phylink_config; struct phylink_pcs phylink_usx_pcs; struct phylink_pcs phylink_sgmii_pcs; + struct phylink_pcs *phylink_ext_pcs; =20 u32 caps; unsigned int dma_burst_length; diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/etherne= t/cadence/macb_main.c index 30591ce8be88..a35f2a3b9fc9 100644 --- a/drivers/net/ethernet/cadence/macb_main.c +++ b/drivers/net/ethernet/cadence/macb_main.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -707,7 +708,10 @@ static struct phylink_pcs *macb_mac_select_pcs(struct = phylink_config *config, struct net_device *ndev =3D to_net_dev(config->dev); struct macb *bp =3D netdev_priv(ndev); =20 - if (interface =3D=3D PHY_INTERFACE_MODE_10GBASER) + if (bp->phylink_ext_pcs && + test_bit(interface, bp->phylink_ext_pcs->supported_interfaces)) + return bp->phylink_ext_pcs; + else if (interface =3D=3D PHY_INTERFACE_MODE_10GBASER) return &bp->phylink_usx_pcs; else if (interface =3D=3D PHY_INTERFACE_MODE_SGMII) return &bp->phylink_sgmii_pcs; @@ -733,7 +737,10 @@ static void macb_mac_config(struct phylink_config *con= fig, unsigned int mode, if (state->interface =3D=3D PHY_INTERFACE_MODE_RMII) ctrl |=3D MACB_BIT(RM9200_RMII); } else if (macb_is_gem(bp)) { - if (macb_mac_select_pcs(config, state->interface)) + struct phylink_pcs *pcs =3D macb_mac_select_pcs(config, + state->interface); + + if (pcs && pcs !=3D bp->phylink_ext_pcs) ctrl |=3D GEM_BIT(PCSSEL); else ctrl &=3D ~GEM_BIT(PCSSEL); @@ -907,6 +914,14 @@ static int macb_mii_probe(struct net_device *dev) bp->phylink_sgmii_pcs.ops =3D &macb_phylink_pcs_ops; bp->phylink_usx_pcs.ops =3D &macb_phylink_usx_pcs_ops; =20 + bp->phylink_ext_pcs =3D pcs_get_by_fwnode_optional(&bp->pdev->dev, + bp->pdev->dev.fwnode, + NULL); + if (IS_ERR(bp->phylink_ext_pcs)) + return dev_err_probe(&bp->pdev->dev, + PTR_ERR(bp->phylink_ext_pcs), + "Could not get external PCS\n"); + bp->phylink_config.dev =3D &dev->dev; bp->phylink_config.type =3D PHYLINK_NETDEV; bp->phylink_config.mac_managed_pm =3D true; @@ -924,6 +939,11 @@ static int macb_mii_probe(struct net_device *dev) __set_bit(PHY_INTERFACE_MODE_RMII, bp->phylink_config.supported_interfaces); =20 + if (bp->phylink_ext_pcs) + phy_interface_or(bp->phylink_config.supported_interfaces, + bp->phylink_config.supported_interfaces, + bp->phylink_ext_pcs->supported_interfaces); + /* Determine what modes are supported */ if (macb_is_gem(bp) && (bp->caps & MACB_CAPS_GIGABIT_MODE_AVAILABLE)) { bp->phylink_config.mac_capabilities |=3D MAC_1000FD; @@ -950,6 +970,7 @@ static int macb_mii_probe(struct net_device *dev) if (IS_ERR(bp->phylink)) { netdev_err(dev, "Could not create a phylink instance (%ld)\n", PTR_ERR(bp->phylink)); + pcs_put(bp->phylink_ext_pcs); return PTR_ERR(bp->phylink); } =20 @@ -5455,6 +5476,7 @@ static void macb_remove(struct platform_device *pdev) bp->rx_clk, bp->tsu_clk); pm_runtime_set_suspended(&pdev->dev); } + pcs_put(bp->phylink_ext_pcs); phylink_destroy(bp->phylink); free_netdev(dev); } --=20 2.35.1.1320.gc452695387.dirty From nobody Mon Dec 15 01:49:03 2025 Received: from out-183.mta0.migadu.com (out-183.mta0.migadu.com [91.218.175.183]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 47B1C21D3D6 for ; Fri, 23 May 2025 20:34:54 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=91.218.175.183 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1748032495; cv=none; b=aOsUvmHA+dH68gMdzbtc9/HkytS5uDwE0zCQ6crbGdGg1DhIV0BA7TRIzFIP9rkbqo67xfMxrfi4lOdqxTS3k5IF5CKC46nJlzkofdry1JijQiavcgX4PHItTjEJ5nVcaenY3kxgUorkAbzSwFO/YXQXCq+fOP9VZ3dAXqo3kus= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1748032495; c=relaxed/simple; bh=73lc/rPP9eGUfkWT58IBLrpi8r/eruXKFdJ45xDIfH0=; h=From:To:Cc:Subject:Date:Message-Id:In-Reply-To:References: MIME-Version; b=pL0fypG8WNmTh6AHu56aP2NeGg27NHqQLRG2N3IcsP3Ys6WooVfhK1aZmLXyhiiUllMZadkaneMny2P2xmSxzdWWyEtdgMm7skG2C1ua0ULY6mROOVELC4M2pwoq3WbLaafvSClPnjLQ3uXHVh9Ln0WqzGk/vPdq+CLu7HA6CY0= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linux.dev; spf=pass smtp.mailfrom=linux.dev; dkim=pass (1024-bit key) header.d=linux.dev header.i=@linux.dev header.b=EtWai+Rc; arc=none smtp.client-ip=91.218.175.183 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linux.dev Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=linux.dev Authentication-Results: smtp.subspace.kernel.org; dkim=pass (1024-bit key) header.d=linux.dev header.i=@linux.dev header.b="EtWai+Rc" X-Report-Abuse: Please report any abuse attempt to abuse@migadu.com and include these headers. DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linux.dev; s=key1; t=1748032492; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=GTViHUqHHL7FVcOYR+13mg8Z5ebv/l3Vzj9gh5nlRwU=; b=EtWai+RcQT0KQtCIhC9XQzd8sYMtaOQuqnbpn3v0YeOMOXcd58IQXG/99tGbwVPRpYPkfA seIRWDPPzRIY/oQhZlduiIosm85YbGT4e7MZB/df0N88aMqf/9RU0+hkV3W8zQLBO9wCBF E0zQa+watqjB+z2o3KQ8FISaCUlJ+sg= From: Sean Anderson To: netdev@vger.kernel.org, Andrew Lunn , "David S . Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni , Russell King Cc: Lei Wei , Heiner Kallweit , Christian Marangi , Kory Maincent , Simon Horman , Daniel Golle , Vineeth Karumanchi , linux-kernel@vger.kernel.org, Sean Anderson , Rob Herring , Saravana Kannan , Rob Herring , devicetree@vger.kernel.org Subject: [net-next PATCH v5 10/10] of: property: Add device link support for PCS Date: Fri, 23 May 2025 16:33:39 -0400 Message-Id: <20250523203339.1993685-11-sean.anderson@linux.dev> In-Reply-To: <20250523203339.1993685-1-sean.anderson@linux.dev> References: <20250523203339.1993685-1-sean.anderson@linux.dev> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable X-Migadu-Flow: FLOW_OUT Content-Type: text/plain; charset="utf-8" This adds device link support for PCS devices, providing better probe ordering. Signed-off-by: Sean Anderson Acked-by: Rob Herring (Arm) Reviewed-by: Saravana Kannan --- (no changes since v2) Changes in v2: - Reorder pcs_handle to come before suffix props drivers/of/property.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/of/property.c b/drivers/of/property.c index c1feb631e383..1aa28bfadb12 100644 --- a/drivers/of/property.c +++ b/drivers/of/property.c @@ -1377,6 +1377,7 @@ DEFINE_SIMPLE_PROP(post_init_providers, "post-init-pr= oviders", NULL) DEFINE_SIMPLE_PROP(access_controllers, "access-controllers", "#access-cont= roller-cells") DEFINE_SIMPLE_PROP(pses, "pses", "#pse-cells") DEFINE_SIMPLE_PROP(power_supplies, "power-supplies", NULL) +DEFINE_SIMPLE_PROP(pcs_handle, "pcs-handle", NULL) DEFINE_SUFFIX_PROP(regulators, "-supply", NULL) DEFINE_SUFFIX_PROP(gpio, "-gpio", "#gpio-cells") =20 @@ -1528,6 +1529,7 @@ static const struct supplier_bindings of_supplier_bin= dings[] =3D { { .parse_prop =3D parse_interrupts, }, { .parse_prop =3D parse_interrupt_map, }, { .parse_prop =3D parse_access_controllers, }, + { .parse_prop =3D parse_pcs_handle, }, { .parse_prop =3D parse_regulators, }, { .parse_prop =3D parse_gpio, }, { .parse_prop =3D parse_gpios, }, --=20 2.35.1.1320.gc452695387.dirty