From nobody Sun Nov 24 04:03:27 2024 Received: from gloria.sntech.de (gloria.sntech.de [185.11.138.130]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 34CBD1E1048; Thu, 7 Nov 2024 11:47:56 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=185.11.138.130 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1730980077; cv=none; b=DOPRcisi18WEn90A5sjk9KzsifO2OsDeftdk5IocyuIvQ7qn9u5HPMU8aornUQ2+RlWCPcKemlv+JbuBPTn8dx6GWWTyDIjYJ8bRS7Tpqb+x5yMYarH2lDmvdwyAlr/nDb+fYjqu2miJfV/ShDIRY46/5st0YuCZovyoF8h8yJo= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1730980077; c=relaxed/simple; bh=/63pllMZ4i5KoE/zuOj7Bb093fiOC5mBGNF+IAAjJ0c=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=jVzfknk4e9CiGybXtqqGkXBTR5Y5nsbVSY7WfBmB7jzThZoxyl9LBAOKvvbsAisZRTf/qSQc5M+LtsTsd6pkiIaFWR+VBBYtPkjDodVpT9BJxnMsHIAlMwyJI6M/sHmP5HylwG5gbfHLW7a6hFWxcRw/N0tebwOLjXpuNni0Yrc= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=sntech.de; spf=pass smtp.mailfrom=sntech.de; dkim=pass (2048-bit key) header.d=sntech.de header.i=@sntech.de header.b=oOwdF9Xh; arc=none smtp.client-ip=185.11.138.130 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=sntech.de Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=sntech.de Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=sntech.de header.i=@sntech.de header.b="oOwdF9Xh" DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=sntech.de; s=gloria202408; h=Content-Transfer-Encoding:MIME-Version:References: In-Reply-To:Message-ID:Date:Subject:Cc:To:From:Sender:Reply-To:Content-Type: Content-ID:Content-Description:Resent-Date:Resent-From:Resent-Sender: Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help:List-Unsubscribe: List-Subscribe:List-Post:List-Owner:List-Archive; bh=rPKia8mc29LBHIBoWFB0OJoeWWo9xwpVLeKPu0E5yTY=; b=oOwdF9XhUQua5TsDyAUqVgld6g q1t6fDXZRQJVLg30c7i652Mp6G3/GqiqGB/k82Kyi7YNiXtQxb8kN+sgM5zpd9UG+Xkk3R/H84nbB pAvSHCi/uWHzRhJQyXKMNDq+15gxh3IpcAa4l/41wK0jUUQpurl1GVhhkc8PWU/E0t0Enkh/feVuL 1KhS9DJ6OzyvTqreMGctZQQlLGOUNTAGh5nK0B11pB7jJdqhZZUjR0OtMJxzUydbv47KaN1Z43JHO Is7Arus0usp2Gmdufp6kQiJKJ/PCHIYoP9W1qpxDr/N7y3yH2anY4F3xaEYoHFOv569J7qz2BMbuS 4x9wIXvg==; Received: from i53875b28.versanet.de ([83.135.91.40] helo=localhost.localdomain) by gloria.sntech.de with esmtpsa (TLS1.3) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.94.2) (envelope-from ) id 1t90yy-0005lF-Nn; Thu, 07 Nov 2024 12:47:24 +0100 From: Heiko Stuebner To: lee@kernel.org, jikos@kernel.org, jic23@kernel.org Cc: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org, jdelvare@suse.com, linux@roeck-us.net, srinivas.pandruvada@linux.intel.com, bentiss@kernel.org, dmitry.torokhov@gmail.com, pavel@ucw.cz, ukleinek@debian.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-rockchip@lists.infradead.org, linux-input@vger.kernel.org, linux-iio@vger.kernel.org, linux-leds@vger.kernel.org, heiko@sntech.de, stable@vger.kernel.org Subject: [PATCH v9 1/9] HID: hid-sensor-hub: don't use stale platform-data on remove Date: Thu, 7 Nov 2024 12:47:04 +0100 Message-ID: <20241107114712.538976-2-heiko@sntech.de> X-Mailer: git-send-email 2.45.2 In-Reply-To: <20241107114712.538976-1-heiko@sntech.de> References: <20241107114712.538976-1-heiko@sntech.de> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset="utf-8" The hid-sensor-hub creates the individual device structs and transfers them to the created mfd platform-devices via the platform_data in the mfd_cell. Before e651a1da442a ("HID: hid-sensor-hub: Allow parallel synchronous reads= ") the sensor-hub was managing access centrally, with one "completion" in the hub's data structure, which needed to be finished on removal at the latest. The mentioned commit then moved this central management to each hid sensor device, resulting on a completion in each struct hid_sensor_hub_device. The remove procedure was adapted to go through all sensor devices and finish any pending "completion". What this didn't take into account was, platform_device_add_data() that is used by mfd_add{_hotplug}_devices() does a kmemdup on the submitted platform-data. So the data the platform-device gets is a copy of the original data, meaning that the device worked on a different completion than what sensor_hub_remove() currently wants to access. To fix that, use device_for_each_child() to go through each child-device similar to how mfd_remove_devices() unregisters the devices later and with that get the live platform_data to finalize the correct completion. Fixes: e651a1da442a ("HID: hid-sensor-hub: Allow parallel synchronous reads= ") Cc: stable@vger.kernel.org Acked-by: Benjamin Tissoires Acked-by: Srinivas Pandruvada Signed-off-by: Heiko Stuebner Acked-by: Jiri Kosina --- drivers/hid/hid-sensor-hub.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) diff --git a/drivers/hid/hid-sensor-hub.c b/drivers/hid/hid-sensor-hub.c index 7bd86eef6ec7..4c94c03cb573 100644 --- a/drivers/hid/hid-sensor-hub.c +++ b/drivers/hid/hid-sensor-hub.c @@ -730,23 +730,30 @@ static int sensor_hub_probe(struct hid_device *hdev, return ret; } =20 +static int sensor_hub_finalize_pending_fn(struct device *dev, void *data) +{ + struct hid_sensor_hub_device *hsdev =3D dev->platform_data; + + if (hsdev->pending.status) + complete(&hsdev->pending.ready); + + return 0; +} + static void sensor_hub_remove(struct hid_device *hdev) { struct sensor_hub_data *data =3D hid_get_drvdata(hdev); unsigned long flags; - int i; =20 hid_dbg(hdev, " hardware removed\n"); hid_hw_close(hdev); hid_hw_stop(hdev); + spin_lock_irqsave(&data->lock, flags); - for (i =3D 0; i < data->hid_sensor_client_cnt; ++i) { - struct hid_sensor_hub_device *hsdev =3D - data->hid_sensor_hub_client_devs[i].platform_data; - if (hsdev->pending.status) - complete(&hsdev->pending.ready); - } + device_for_each_child(&hdev->dev, NULL, + sensor_hub_finalize_pending_fn); spin_unlock_irqrestore(&data->lock, flags); + mfd_remove_devices(&hdev->dev); mutex_destroy(&data->mutex); } --=20 2.45.2 From nobody Sun Nov 24 04:03:27 2024 Received: from gloria.sntech.de (gloria.sntech.de [185.11.138.130]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 25390212183; Thu, 7 Nov 2024 11:48:00 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=185.11.138.130 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1730980082; cv=none; b=q3XssHq1EVxWlWeVXlKhbef3ylE5oPIr9wkh47Ez7u1F7zcFVhZGmKFIKqkSqcZXDAudqOyFUwqkFb8gjmxL41K/zsK2qlkTg9GnpQtSuUxd05Bekq+2rBrZY1isGR/eDvez8q1R48IRbnuKuCd6Nn81uP2MKp2vRFGVdUToes0= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1730980082; c=relaxed/simple; bh=PRAw6ugHPrefOkrLvhBR5eOG83D/eQhFr4FdkSMhwDI=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=q8fyCTGuDH7HMnJOK5UIBvoMmceN2+JcdLUbb7mE4hW/tg6eqLTS7iiW3/7fld9yqZBgmr2OhuOrShyNWIcmLjKHq8KhdI6WkgPg8BWfreZ5tq9aPbxPOdKRu9aaj7MvB233eyv7JN6VVTMmGroqafWEN0c3m3qCw7A3e1/f+00= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=sntech.de; spf=pass smtp.mailfrom=sntech.de; dkim=pass (2048-bit key) header.d=sntech.de header.i=@sntech.de header.b=vLcp2aRD; arc=none smtp.client-ip=185.11.138.130 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=sntech.de Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=sntech.de Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=sntech.de header.i=@sntech.de header.b="vLcp2aRD" DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=sntech.de; s=gloria202408; h=Content-Transfer-Encoding:MIME-Version:References: In-Reply-To:Message-ID:Date:Subject:Cc:To:From:Sender:Reply-To:Content-Type: Content-ID:Content-Description:Resent-Date:Resent-From:Resent-Sender: Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help:List-Unsubscribe: List-Subscribe:List-Post:List-Owner:List-Archive; bh=z4S7eFAqOKlyh0GLmEWkpvO9ikI1XkubVMydYt9t5D8=; b=vLcp2aRDwCSVwAoqK7+/n31gD/ 7pj/YV9z9UmFqiQb3zgVSjTeWqcggKAbbNcrqXf3t72o6Wrjw/h5ZiHDFJA7nVq11AH28hvkXbprD /zJuGZh4FTBtFkBVnM89jFuT5pNS63bOEDXe3tBNTXAvygkHDrcRsk648E5IIui0zzX66a+77F9e9 013SZvC1FrBEZyrN+PaPiFq02VcrH7HdcW9/ORKUALAtjZHU9VPIFIhaUNXLjZlsBvzBtWunwi8tt RDZH5xF/SdTjmNRrRg944sfttUsdBXa6vkOyufCKv2JtY02Ma5k7i8U9Qie4LrXgOFLG23IFUE62w 0UE1gw0A==; Received: from i53875b28.versanet.de ([83.135.91.40] helo=localhost.localdomain) by gloria.sntech.de with esmtpsa (TLS1.3) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.94.2) (envelope-from ) id 1t90yz-0005lF-IE; Thu, 07 Nov 2024 12:47:25 +0100 From: Heiko Stuebner To: lee@kernel.org, jikos@kernel.org, jic23@kernel.org Cc: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org, jdelvare@suse.com, linux@roeck-us.net, srinivas.pandruvada@linux.intel.com, bentiss@kernel.org, dmitry.torokhov@gmail.com, pavel@ucw.cz, ukleinek@debian.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-rockchip@lists.infradead.org, linux-input@vger.kernel.org, linux-iio@vger.kernel.org, linux-leds@vger.kernel.org, heiko@sntech.de Subject: [PATCH v9 2/9] mfd: core: make platform_data pointer const in struct mfd_cell Date: Thu, 7 Nov 2024 12:47:05 +0100 Message-ID: <20241107114712.538976-3-heiko@sntech.de> X-Mailer: git-send-email 2.45.2 In-Reply-To: <20241107114712.538976-1-heiko@sntech.de> References: <20241107114712.538976-1-heiko@sntech.de> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset="utf-8" The content of the platform_data of a struct mfd_cell is simply passed on to the platform_device_add_data() call in mfd_add_device() . platform_device_add_data() already handles the data behind that pointer as const and also uses kmemdup to create a copy of the data before handing that copy over to the newly created platform-device, so there is no reason to not extend this to struct mfd_cell, as the old copy in the mfd_cell will be stale anyway. This allows to pass structs gathered from of_device_get_match_data() as platform-data to sub-devices - which is retrieved as const already. Signed-off-by: Heiko Stuebner --- include/linux/mfd/core.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h index e8bcad641d8c..faeea7abd688 100644 --- a/include/linux/mfd/core.h +++ b/include/linux/mfd/core.h @@ -72,7 +72,7 @@ struct mfd_cell { int (*resume)(struct platform_device *dev); =20 /* platform data passed to the sub devices drivers */ - void *platform_data; + const void *platform_data; size_t pdata_size; =20 /* Matches ACPI */ --=20 2.45.2 From nobody Sun Nov 24 04:03:27 2024 Received: from gloria.sntech.de (gloria.sntech.de [185.11.138.130]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id C045920B1E7; Thu, 7 Nov 2024 11:47:56 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=185.11.138.130 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1730980078; cv=none; b=ZmGcJjuyyaiNGjkenU1CcEGMRKBjvqIHlPAbaR8aKLPUYwySSsHsnXpC+FJYyHdftC5Pm4HDS2a6yeO0UFTGaOaRo0nIZw0WPEton2F13C5oOYHGXd8oLd9LuZkU4xIZC7f0jF+Gs/yIEYdTDOmZ2vGIGocAYqhsjXHZSVBAJ5U= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1730980078; c=relaxed/simple; bh=1AmPfuxorIuY0RBmKwLqnrFL0OQp1Bk5eEcfYCccP94=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=F1qiNSBckA7nC0wzXS51pnSc92fC12nX+Piha9R5SjEUUSUHBI0iU32XgKpnzf+qdUG6zr4esFjT6hAq2VTbl+ZV9J3Y183rxYWpLIQr+qvrd0b5xcLwz8eyr+sHtdHyPuuQDgqG0Vv3YbLIHJBEQxMJT8FP/CVX7bfem91chjs= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=sntech.de; spf=pass smtp.mailfrom=sntech.de; dkim=pass (2048-bit key) header.d=sntech.de header.i=@sntech.de header.b=n45/p8vq; arc=none smtp.client-ip=185.11.138.130 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=sntech.de Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=sntech.de Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=sntech.de header.i=@sntech.de header.b="n45/p8vq" DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=sntech.de; s=gloria202408; h=Content-Transfer-Encoding:MIME-Version:References: In-Reply-To:Message-ID:Date:Subject:Cc:To:From:Sender:Reply-To:Content-Type: Content-ID:Content-Description:Resent-Date:Resent-From:Resent-Sender: Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help:List-Unsubscribe: List-Subscribe:List-Post:List-Owner:List-Archive; bh=FpmBZJxArqiaRXTii0FbGSEmORT8TKVJ82E7vS3IVPc=; b=n45/p8vqMvm1ybdc/RTekrkaMc Dp3MeS8HOLWB5+vj/IxKfaf4e5TXbzXgOzIpphtDulTcSbsHdStHnSFDLuvghS45kqYQ1FG7K25kI 5Ufjqm+MH5feQIezD1EytnxPw7lD4G64o4R6PVhK1g0hxJUW/aJHfQvgbl3/39fPXd5K09+f5/Yl2 wyYsyhV8qO3l2oNl4GCee6e0lWqrb7dpkbos4urSthPF6tIwz1TmM4zlWzby4JffeECCURpvuiREJ dSfb5S2V16PQBdX8WdGozSc8yUThJe3+a41EvkayQp6HQFKJxxGV3fGyax337IiRd5RnqqHLgE3nW LEPvRShw==; Received: from i53875b28.versanet.de ([83.135.91.40] helo=localhost.localdomain) by gloria.sntech.de with esmtpsa (TLS1.3) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.94.2) (envelope-from ) id 1t90z0-0005lF-Dl; Thu, 07 Nov 2024 12:47:26 +0100 From: Heiko Stuebner To: lee@kernel.org, jikos@kernel.org, jic23@kernel.org Cc: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org, jdelvare@suse.com, linux@roeck-us.net, srinivas.pandruvada@linux.intel.com, bentiss@kernel.org, dmitry.torokhov@gmail.com, pavel@ucw.cz, ukleinek@debian.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-rockchip@lists.infradead.org, linux-input@vger.kernel.org, linux-iio@vger.kernel.org, linux-leds@vger.kernel.org, heiko@sntech.de, Conor Dooley Subject: [PATCH v9 3/9] dt-bindings: mfd: add binding for qnap,ts433-mcu devices Date: Thu, 7 Nov 2024 12:47:06 +0100 Message-ID: <20241107114712.538976-4-heiko@sntech.de> X-Mailer: git-send-email 2.45.2 In-Reply-To: <20241107114712.538976-1-heiko@sntech.de> References: <20241107114712.538976-1-heiko@sntech.de> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset="utf-8" These MCUs can be found in network attached storage devices made by QNAP. They are connected to a serial port of the host device and provide functionality like LEDs, power-control and temperature monitoring. LEDs, buttons, etc are all elements of the MCU firmware itself, so don't need devicetree input, though the fan gets its cooling settings from a fan-0 subnode. A binding for the LEDs for setting the linux-default-trigger may come later, once all the LEDs are understood and ATA controllers actually can address individual port-LEDs, but are really optional. Reviewed-by: Conor Dooley Signed-off-by: Heiko Stuebner --- .../bindings/mfd/qnap,ts433-mcu.yaml | 42 +++++++++++++++++++ 1 file changed, 42 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/qnap,ts433-mcu.ya= ml diff --git a/Documentation/devicetree/bindings/mfd/qnap,ts433-mcu.yaml b/Do= cumentation/devicetree/bindings/mfd/qnap,ts433-mcu.yaml new file mode 100644 index 000000000000..877078ac172f --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/qnap,ts433-mcu.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/qnap,ts433-mcu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: QNAP NAS on-board Microcontroller + +maintainers: + - Heiko Stuebner + +description: + QNAP embeds a microcontroller on their NAS devices adding system feature + as PWM Fan control, additional LEDs, power button status and more. + +properties: + compatible: + enum: + - qnap,ts433-mcu + +patternProperties: + "^fan-[0-9]+$": + $ref: /schemas/hwmon/fan-common.yaml# + unevaluatedProperties: false + +required: + - compatible + +additionalProperties: false + +examples: + - | + uart { + mcu { + compatible =3D "qnap,ts433-mcu"; + + fan-0 { + #cooling-cells =3D <2>; + cooling-levels =3D <0 64 89 128 166 204 221 238>; + }; + }; + }; --=20 2.45.2 From nobody Sun Nov 24 04:03:27 2024 Received: from gloria.sntech.de (gloria.sntech.de [185.11.138.130]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 45BBC20EA3D; Thu, 7 Nov 2024 11:47:58 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=185.11.138.130 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1730980081; cv=none; b=kkGTKisb1/4+XOfHNykmf/bVYm5sQ4MuX1K738mRH0UEd+4YKNOsbj6wLDa5mxakfgxtOyRipAceI7ncJC2sgS1QACrLAndc0KAKg1vZm//adoB4FxycMTgTtSqiLw9zZYW7Kg+cQzYPZGHyRV4nv055K9NpPa0wgRhFqtjpTM0= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1730980081; c=relaxed/simple; bh=q+CyW7hRxRJsOwECDdSaZ1apYnxVlMukFZ91eS8dwyI=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=qQP27RHMngKQ15HXnjbuyxuqfhsnoPfJ+1JmAxESzr0ZVJ6RYz4EmsLPnaaDYdPx0WCMFYhiYqityBkxoGWY/1FpoNs0zpq4ttwR62hbA8i9vFO0PJS8eGOGY4c6wM+5eMvjEDJsOrH56qnI8ZoZQjyLV3ZB3t3R3gtNz8ut2eU= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=sntech.de; spf=pass smtp.mailfrom=sntech.de; dkim=pass (2048-bit key) header.d=sntech.de header.i=@sntech.de header.b=KqK7eP+4; arc=none smtp.client-ip=185.11.138.130 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=sntech.de Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=sntech.de Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=sntech.de header.i=@sntech.de header.b="KqK7eP+4" DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=sntech.de; s=gloria202408; h=Content-Transfer-Encoding:MIME-Version:References: In-Reply-To:Message-ID:Date:Subject:Cc:To:From:Sender:Reply-To:Content-Type: Content-ID:Content-Description:Resent-Date:Resent-From:Resent-Sender: Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help:List-Unsubscribe: List-Subscribe:List-Post:List-Owner:List-Archive; bh=NJxGQ943tcxwIm5MzLn/1i2mcCJ6TCeIRz2CYSjjGsk=; b=KqK7eP+4k8YnyjR9nCAIyfm+57 EhP7vQfX7XohLQiihWkqYZHP8PSdOfJnyLSMqVziRCzYEn2EyO+4MONpm5WYUSyw8DfUwYQdcLa6H gJoI0O8v7LLBQ9ginaJJZSY82/CN1uZA80ZVH5LIMgAZntS3Vw171mUlk+Kp/YW1fpdreJoMZe5OS X+qP8xsIfOipZNnfrGv4LbkpKzYMHaOr4NTTxiyYmAytAiqNEk3cnTG+ut78AMFWNq0FdPRz7LtIE ypKELdkrDQYNh38oqj6uSELIfmr2oNKeHsYFD+rI2YcbC5//TppQNfIEc90AbCXyO5gJ2Va3d5DJf +H6Kowag==; Received: from i53875b28.versanet.de ([83.135.91.40] helo=localhost.localdomain) by gloria.sntech.de with esmtpsa (TLS1.3) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.94.2) (envelope-from ) id 1t90z1-0005lF-8W; Thu, 07 Nov 2024 12:47:27 +0100 From: Heiko Stuebner To: lee@kernel.org, jikos@kernel.org, jic23@kernel.org Cc: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org, jdelvare@suse.com, linux@roeck-us.net, srinivas.pandruvada@linux.intel.com, bentiss@kernel.org, dmitry.torokhov@gmail.com, pavel@ucw.cz, ukleinek@debian.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-rockchip@lists.infradead.org, linux-input@vger.kernel.org, linux-iio@vger.kernel.org, linux-leds@vger.kernel.org, heiko@sntech.de Subject: [PATCH v9 4/9] mfd: add base driver for qnap-mcu devices Date: Thu, 7 Nov 2024 12:47:07 +0100 Message-ID: <20241107114712.538976-5-heiko@sntech.de> X-Mailer: git-send-email 2.45.2 In-Reply-To: <20241107114712.538976-1-heiko@sntech.de> References: <20241107114712.538976-1-heiko@sntech.de> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset="utf-8" These microcontroller units are used in network-attached-storage devices made by QNAP and provide additional functionality to the system. This adds the base driver that implements the serial protocol via serdev and additionally hooks into the poweroff handlers to turn off the parts of the system not supplied by the general PMIC. Turning off (at least the TSx33 devices using Rockchip SoCs) consists of two separate actions. Turning off the MCU alone does not turn off the main SoC and turning off only the SoC/PMIC does not turn off the hard-drives. Also if the MCU is not turned off, the system also won't start again until it is unplugged from power. So on shutdown the MCU needs to be turned off separately before the main PMIC. The protocol spoken by the MCU is sadly not documented, but was obtained by listening to the chatter on the serial port, as thankfully the "hal_app" program from QNAPs firmware allows triggering all/most MCU actions from the command line. The implementation of how to talk to the serial device got some inspiration from the rave-sp servdev driver. Signed-off-by: Heiko Stuebner --- MAINTAINERS | 6 + drivers/mfd/Kconfig | 13 ++ drivers/mfd/Makefile | 2 + drivers/mfd/qnap-mcu.c | 338 +++++++++++++++++++++++++++++++++++ include/linux/mfd/qnap-mcu.h | 26 +++ 5 files changed, 385 insertions(+) create mode 100644 drivers/mfd/qnap-mcu.c create mode 100644 include/linux/mfd/qnap-mcu.h diff --git a/MAINTAINERS b/MAINTAINERS index 65b7bbfeea96..cd8d18f76d28 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -18878,6 +18878,12 @@ L: linux-media@vger.kernel.org S: Odd Fixes F: drivers/media/tuners/qm1d1c0042* =20 +QNAP MCU DRIVER +M: Heiko Stuebner +S: Maintained +F: drivers/mfd/qnap-mcu.c +F: include/linux/qnap-mcu.h + QNX4 FILESYSTEM M: Anders Larsen S: Maintained diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index ae23b317a64e..74f4de8cd6f1 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -2386,6 +2386,19 @@ config MFD_INTEL_M10_BMC_PMCI additional drivers must be enabled in order to use the functionality of the device. =20 +config MFD_QNAP_MCU + tristate "QNAP microcontroller unit core driver" + depends on SERIAL_DEV_BUS + select MFD_CORE + help + Select this to get support for the QNAP MCU device found in + several devices of QNAP network attached storage products that + implements additional functionality for the device, like fan + and LED control. + + This driver implements the base serial protocol to talk to the + device and provides functions for the other parts to hook into. + config MFD_RSMU_I2C tristate "Renesas Synchronization Management Unit with I2C" depends on I2C && OF diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index e057d6d6faef..b2d540934179 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -288,5 +288,7 @@ obj-$(CONFIG_MFD_INTEL_M10_BMC_PMCI) +=3D intel-m10-b= mc-pmci.o obj-$(CONFIG_MFD_ATC260X) +=3D atc260x-core.o obj-$(CONFIG_MFD_ATC260X_I2C) +=3D atc260x-i2c.o =20 +obj-$(CONFIG_MFD_QNAP_MCU) +=3D qnap-mcu.o + obj-$(CONFIG_MFD_RSMU_I2C) +=3D rsmu_i2c.o rsmu_core.o obj-$(CONFIG_MFD_RSMU_SPI) +=3D rsmu_spi.o rsmu_core.o diff --git a/drivers/mfd/qnap-mcu.c b/drivers/mfd/qnap-mcu.c new file mode 100644 index 000000000000..4be39d8b2905 --- /dev/null +++ b/drivers/mfd/qnap-mcu.c @@ -0,0 +1,338 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Core driver for the microcontroller unit in QNAP NAS devices that is + * connected via a dedicated UART port. + * + * Copyright (C) 2024 Heiko Stuebner + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* The longest command found so far is 5 bytes long */ +#define QNAP_MCU_MAX_CMD_SIZE 5 +#define QNAP_MCU_MAX_DATA_SIZE 36 +#define QNAP_MCU_CHECKSUM_SIZE 1 + +#define QNAP_MCU_RX_BUFFER_SIZE \ + (QNAP_MCU_MAX_DATA_SIZE + QNAP_MCU_CHECKSUM_SIZE) + +#define QNAP_MCU_TX_BUFFER_SIZE \ + (QNAP_MCU_MAX_CMD_SIZE + QNAP_MCU_CHECKSUM_SIZE) + +#define QNAP_MCU_ACK_LEN 2 +#define QNAP_MCU_VERSION_LEN 4 + +#define QNAP_MCU_TIMEOUT_MS 500 + +/** + * struct qnap_mcu_reply - Reply to a command + * + * @data: Buffer to store reply payload in + * @length: Expected reply length, including the checksum + * @received: Received number of bytes, so far + * @done: Triggered when the entire reply has been received + */ +struct qnap_mcu_reply { + u8 *data; + size_t length; + size_t received; + struct completion done; +}; + +/** + * struct qnap_mcu - QNAP NAS embedded controller + * + * @serdev: Pointer to underlying serdev + * @bus_lock: Lock to serialize access to the device + * @reply: Reply data structure + * @variant: Device variant specific information + * @version: MCU firmware version + */ +struct qnap_mcu { + struct serdev_device *serdev; + struct mutex bus_lock; + struct qnap_mcu_reply reply; + const struct qnap_mcu_variant *variant; + u8 version[QNAP_MCU_VERSION_LEN]; +}; + +/* + * The QNAP-MCU uses a basic XOR checksum. + * It is always the last byte and XORs the whole previous message. + */ +static u8 qnap_mcu_csum(const u8 *buf, size_t size) +{ + u8 csum =3D 0; + + while (size--) + csum ^=3D *buf++; + + return csum; +} + +static int qnap_mcu_write(struct qnap_mcu *mcu, const u8 *data, u8 data_si= ze) +{ + unsigned char tx[QNAP_MCU_TX_BUFFER_SIZE]; + size_t length =3D data_size + QNAP_MCU_CHECKSUM_SIZE; + + if (length > sizeof(tx)) { + dev_err(&mcu->serdev->dev, "data too big for transmit buffer"); + return -EINVAL; + } + + memcpy(tx, data, data_size); + tx[data_size] =3D qnap_mcu_csum(data, data_size); + + serdev_device_write_flush(mcu->serdev); + + return serdev_device_write(mcu->serdev, tx, length, HZ); +} + +static size_t qnap_mcu_receive_buf(struct serdev_device *serdev, const u8 = *buf, size_t size) +{ + struct device *dev =3D &serdev->dev; + struct qnap_mcu *mcu =3D dev_get_drvdata(dev); + struct qnap_mcu_reply *reply =3D &mcu->reply; + const u8 *src =3D buf; + const u8 *end =3D buf + size; + + if (!reply->length) { + dev_warn(dev, "Received %zu bytes, we were not waiting for\n", size); + return size; + } + + while (src < end) { + reply->data[reply->received] =3D *src++; + reply->received++; + + if (reply->received =3D=3D reply->length) { + /* We don't expect any characters from the device now */ + reply->length =3D 0; + + complete(&reply->done); + + /* + * We report the consumed number of bytes. If there + * are still bytes remaining (though there shouldn't) + * the serdev layer will re-execute this handler with + * the remainder of the Rx bytes. + */ + return src - buf; + } + } + + /* + * The only way to get out of the above loop and end up here + * is through consuming all of the supplied data, so here we + * report that we processed it all. + */ + return size; +} + +static const struct serdev_device_ops qnap_mcu_serdev_device_ops =3D { + .receive_buf =3D qnap_mcu_receive_buf, + .write_wakeup =3D serdev_device_write_wakeup, +}; + +int qnap_mcu_exec(struct qnap_mcu *mcu, + const u8 *cmd_data, size_t cmd_data_size, + u8 *reply_data, size_t reply_data_size) +{ + unsigned char rx[QNAP_MCU_RX_BUFFER_SIZE]; + size_t length =3D reply_data_size + QNAP_MCU_CHECKSUM_SIZE; + struct qnap_mcu_reply *reply =3D &mcu->reply; + int ret =3D 0; + + if (length > sizeof(rx)) { + dev_err(&mcu->serdev->dev, "expected data too big for receive buffer"); + return -EINVAL; + } + + mutex_lock(&mcu->bus_lock); + + reply->data =3D rx, + reply->length =3D length, + reply->received =3D 0, + reinit_completion(&reply->done); + + qnap_mcu_write(mcu, cmd_data, cmd_data_size); + + serdev_device_wait_until_sent(mcu->serdev, msecs_to_jiffies(QNAP_MCU_TIME= OUT_MS)); + + if (!wait_for_completion_timeout(&reply->done, msecs_to_jiffies(QNAP_MCU_= TIMEOUT_MS))) { + dev_err(&mcu->serdev->dev, "Command timeout\n"); + ret =3D -ETIMEDOUT; + } else { + u8 crc =3D qnap_mcu_csum(rx, reply_data_size); + + if (crc !=3D rx[reply_data_size]) { + dev_err(&mcu->serdev->dev, + "Invalid Checksum received\n"); + ret =3D -EIO; + } else { + memcpy(reply_data, rx, reply_data_size); + } + } + + mutex_unlock(&mcu->bus_lock); + return ret; +} +EXPORT_SYMBOL_GPL(qnap_mcu_exec); + +int qnap_mcu_exec_with_ack(struct qnap_mcu *mcu, + const u8 *cmd_data, size_t cmd_data_size) +{ + u8 ack[QNAP_MCU_ACK_LEN]; + int ret; + + ret =3D qnap_mcu_exec(mcu, cmd_data, cmd_data_size, ack, sizeof(ack)); + if (ret) + return ret; + + /* Should return @0 */ + if (ack[0] !=3D '@' || ack[1] !=3D '0') { + dev_err(&mcu->serdev->dev, "Did not receive ack\n"); + return -EIO; + } + + return 0; +} +EXPORT_SYMBOL_GPL(qnap_mcu_exec_with_ack); + +static int qnap_mcu_get_version(struct qnap_mcu *mcu) +{ + const u8 cmd[] =3D { '%', 'V' }; + u8 rx[14]; + int ret; + + /* Reply is the 2 command-bytes + 4 bytes describing the version */ + ret =3D qnap_mcu_exec(mcu, cmd, sizeof(cmd), rx, QNAP_MCU_VERSION_LEN + 2= ); + if (ret) + return ret; + + memcpy(mcu->version, &rx[2], QNAP_MCU_VERSION_LEN); + + return 0; +} + +/* + * The MCU controls power to the peripherals but not the CPU. + * + * So using the PMIC to power off the system keeps the MCU and hard-drives + * running. This also then prevents the system from turning back on until + * the MCU is turned off by unplugging the power cable. + * Turning off the MCU alone on the other hand turns off the hard drives, + * LEDs, etc while the main SoC stays running - including its network port= s. + */ +static int qnap_mcu_power_off(struct sys_off_data *data) +{ + const u8 cmd[] =3D { '@', 'C', '0' }; + struct qnap_mcu *mcu =3D data->cb_data; + int ret; + + ret =3D qnap_mcu_exec_with_ack(mcu, cmd, sizeof(cmd)); + if (ret) { + dev_err(&mcu->serdev->dev, "MCU poweroff failed %d\n", ret); + return NOTIFY_STOP; + } + + return NOTIFY_DONE; +} + +static const struct qnap_mcu_variant qnap_ts433_mcu =3D { + .baud_rate =3D 115200, + .num_drives =3D 4, + .fan_pwm_min =3D 51, /* Specified in original model.conf */ + .fan_pwm_max =3D 255, + .usb_led =3D true, +}; + +static struct mfd_cell qnap_mcu_cells[] =3D { + { .name =3D "qnap-mcu-input", }, + { .name =3D "qnap-mcu-leds", }, + { .name =3D "qnap-mcu-hwmon", } +}; + +static int qnap_mcu_probe(struct serdev_device *serdev) +{ + struct device *dev =3D &serdev->dev; + struct qnap_mcu *mcu; + int ret; + + mcu =3D devm_kzalloc(dev, sizeof(*mcu), GFP_KERNEL); + if (!mcu) + return -ENOMEM; + + mcu->serdev =3D serdev; + dev_set_drvdata(dev, mcu); + + mcu->variant =3D of_device_get_match_data(dev); + if (!mcu->variant) + return -ENODEV; + + mutex_init(&mcu->bus_lock); + init_completion(&mcu->reply.done); + + serdev_device_set_client_ops(serdev, &qnap_mcu_serdev_device_ops); + ret =3D devm_serdev_device_open(dev, serdev); + if (ret) + return ret; + + serdev_device_set_baudrate(serdev, mcu->variant->baud_rate); + serdev_device_set_flow_control(serdev, false); + + ret =3D serdev_device_set_parity(serdev, SERDEV_PARITY_NONE); + if (ret) + return dev_err_probe(dev, ret, "Failed to set parity\n"); + + ret =3D qnap_mcu_get_version(mcu); + if (ret) + return ret; + + ret =3D devm_register_sys_off_handler(dev, + SYS_OFF_MODE_POWER_OFF_PREPARE, + SYS_OFF_PRIO_DEFAULT, + &qnap_mcu_power_off, mcu); + if (ret) + return dev_err_probe(dev, ret, + "Failed to register poweroff handler\n"); + + for (int i =3D 0; i < ARRAY_SIZE(qnap_mcu_cells); i++) { + qnap_mcu_cells[i].platform_data =3D mcu->variant; + qnap_mcu_cells[i].pdata_size =3D sizeof(*mcu->variant); + } + + ret =3D devm_mfd_add_devices(dev, PLATFORM_DEVID_AUTO, qnap_mcu_cells, + ARRAY_SIZE(qnap_mcu_cells), NULL, 0, NULL); + if (ret) + return dev_err_probe(dev, ret, "Failed to add child devices\n"); + + return 0; +} + +static const struct of_device_id qnap_mcu_dt_ids[] =3D { + { .compatible =3D "qnap,ts433-mcu", .data =3D &qnap_ts433_mcu }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, qnap_mcu_dt_ids); + +static struct serdev_device_driver qnap_mcu_drv =3D { + .probe =3D qnap_mcu_probe, + .driver =3D { + .name =3D "qnap-mcu", + .of_match_table =3D qnap_mcu_dt_ids, + }, +}; +module_serdev_device_driver(qnap_mcu_drv); + +MODULE_AUTHOR("Heiko Stuebner "); +MODULE_DESCRIPTION("QNAP MCU core driver"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/mfd/qnap-mcu.h b/include/linux/mfd/qnap-mcu.h new file mode 100644 index 000000000000..8d48c212fd44 --- /dev/null +++ b/include/linux/mfd/qnap-mcu.h @@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Core definitions for QNAP MCU MFD driver. + * Copyright (C) 2024 Heiko Stuebner + */ + +#ifndef _LINUX_QNAP_MCU_H_ +#define _LINUX_QNAP_MCU_H_ + +struct qnap_mcu; + +struct qnap_mcu_variant { + u32 baud_rate; + int num_drives; + int fan_pwm_min; + int fan_pwm_max; + bool usb_led; +}; + +int qnap_mcu_exec(struct qnap_mcu *mcu, + const u8 *cmd_data, size_t cmd_data_size, + u8 *reply_data, size_t reply_data_size); +int qnap_mcu_exec_with_ack(struct qnap_mcu *mcu, + const u8 *cmd_data, size_t cmd_data_size); + +#endif /* _LINUX_QNAP_MCU_H_ */ --=20 2.45.2 From nobody Sun Nov 24 04:03:27 2024 Received: from gloria.sntech.de (gloria.sntech.de [185.11.138.130]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id D5B7720C474; Thu, 7 Nov 2024 11:47:57 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=185.11.138.130 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1730980080; cv=none; b=bYqW4RkhTUzbZ4gICnBbNytSxXKY9+hA19IetmELGQGFb8trh6UA/YP2JCaJ3iDawpDmnygl8+8m1a0rxnu6VgowpvH/vFKqZ6EnOHXvsq51fefjT8zsSn6TXNePfKdxkiLXa9NNDW8XPzBXo68Ck7wvk9KjZyvM29O0+40JuME= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1730980080; c=relaxed/simple; bh=9t1Tv+gesPmNmxr0lQJxwHBn0Mp6m4xEoC98WD1VfXg=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=fIxXc9QueMiwSM89CFOmuCNex+oFfybPk+3TJ3SS2XDpA2/Tif2WTzHoQntgCdpXyLgv5kW3zMN2lq8SXJ1IB+FKRieY9IAffolXd8+zrbN19SbIqvI83IUsY5qhsHczFaYSYe5JcAbO8jg2AKgL7F/EbxEZKO/kkM24ldzOGbU= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=sntech.de; spf=pass smtp.mailfrom=sntech.de; dkim=pass (2048-bit key) header.d=sntech.de header.i=@sntech.de header.b=GMnk/1UK; arc=none smtp.client-ip=185.11.138.130 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=sntech.de Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=sntech.de Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=sntech.de header.i=@sntech.de header.b="GMnk/1UK" DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=sntech.de; s=gloria202408; h=Content-Transfer-Encoding:MIME-Version:References: In-Reply-To:Message-ID:Date:Subject:Cc:To:From:Sender:Reply-To:Content-Type: Content-ID:Content-Description:Resent-Date:Resent-From:Resent-Sender: Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help:List-Unsubscribe: List-Subscribe:List-Post:List-Owner:List-Archive; bh=3TTK9hx0Q0YVsYayd2HMfhhvX3Er6OFuU5Vv4/bDBu8=; b=GMnk/1UKzRihev+bb2TLkMLGyY HZyiR5/ULzyBihb84DjtqR3ELMTt29BYZ+J6qc1qkjpHMVQuv7qk1FRHk0RwLIMHRHJe0LWu3vZPx 5deQ9nz3r/oUWpxhVc4b4PgEY2hBDTRz/6fYygkNiJTYjfxFvAh73K1nuXlxwDeioVFm2wJf4dhoB nwxRMHYwinok8JI9A+gFxwnkXjP+ZO4FngAZzWpfUynAQqoNJEE71qHdI0PB+99nTvTrIvGG7ckAk d/Ei9Nm2jf35gVt24tA+pa36PaAZxOoBAhBCdjrRpt0sPAX/RGdappAqDxbCpi0bvWNSHunKo9t/z cWFUjHhQ==; Received: from i53875b28.versanet.de ([83.135.91.40] helo=localhost.localdomain) by gloria.sntech.de with esmtpsa (TLS1.3) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.94.2) (envelope-from ) id 1t90z2-0005lF-2s; Thu, 07 Nov 2024 12:47:28 +0100 From: Heiko Stuebner To: lee@kernel.org, jikos@kernel.org, jic23@kernel.org Cc: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org, jdelvare@suse.com, linux@roeck-us.net, srinivas.pandruvada@linux.intel.com, bentiss@kernel.org, dmitry.torokhov@gmail.com, pavel@ucw.cz, ukleinek@debian.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-rockchip@lists.infradead.org, linux-input@vger.kernel.org, linux-iio@vger.kernel.org, linux-leds@vger.kernel.org, heiko@sntech.de Subject: [PATCH v9 5/9] leds: add driver for LEDs from qnap-mcu devices Date: Thu, 7 Nov 2024 12:47:08 +0100 Message-ID: <20241107114712.538976-6-heiko@sntech.de> X-Mailer: git-send-email 2.45.2 In-Reply-To: <20241107114712.538976-1-heiko@sntech.de> References: <20241107114712.538976-1-heiko@sntech.de> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset="utf-8" This adds a driver that connects to the qnap-mcu mfd driver and provides access to the LEDs on it. Signed-off-by: Heiko Stuebner --- MAINTAINERS | 1 + drivers/leds/Kconfig | 11 ++ drivers/leds/Makefile | 1 + drivers/leds/leds-qnap-mcu.c | 227 +++++++++++++++++++++++++++++++++++ 4 files changed, 240 insertions(+) create mode 100644 drivers/leds/leds-qnap-mcu.c diff --git a/MAINTAINERS b/MAINTAINERS index cd8d18f76d28..9abea0772d2b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -18881,6 +18881,7 @@ F: drivers/media/tuners/qm1d1c0042* QNAP MCU DRIVER M: Heiko Stuebner S: Maintained +F: drivers/leds/leds-qnap-mcu.c F: drivers/mfd/qnap-mcu.c F: include/linux/qnap-mcu.h =20 diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index b784bb74a837..28a208fa893e 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -580,6 +580,17 @@ config LEDS_PCA995X LED driver chips accessed via the I2C bus. Supported devices include PCA9955BTW, PCA9952TW and PCA9955TW. =20 +config LEDS_QNAP_MCU + tristate "LED Support for QNAP MCU controllers" + depends on LEDS_CLASS + depends on MFD_QNAP_MCU + help + This option enables support for LEDs available on embedded + controllers used in QNAP NAS devices. + + This driver can also be built as a module. If so, the module + will be called qnap-mcu-leds. + config LEDS_WM831X_STATUS tristate "LED support for status LEDs on WM831x PMICs" depends on LEDS_CLASS diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index 18afbb5a23ee..c6f74865d729 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -79,6 +79,7 @@ obj-$(CONFIG_LEDS_PCA995X) +=3D leds-pca995x.o obj-$(CONFIG_LEDS_PM8058) +=3D leds-pm8058.o obj-$(CONFIG_LEDS_POWERNV) +=3D leds-powernv.o obj-$(CONFIG_LEDS_PWM) +=3D leds-pwm.o +obj-$(CONFIG_LEDS_QNAP_MCU) +=3D leds-qnap-mcu.o obj-$(CONFIG_LEDS_REGULATOR) +=3D leds-regulator.o obj-$(CONFIG_LEDS_SC27XX_BLTC) +=3D leds-sc27xx-bltc.o obj-$(CONFIG_LEDS_SUN50I_A100) +=3D leds-sun50i-a100.o diff --git a/drivers/leds/leds-qnap-mcu.c b/drivers/leds/leds-qnap-mcu.c new file mode 100644 index 000000000000..4e4709456261 --- /dev/null +++ b/drivers/leds/leds-qnap-mcu.c @@ -0,0 +1,227 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Driver for LEDs found on QNAP MCU devices + * + * Copyright (C) 2024 Heiko Stuebner + */ + +#include +#include +#include +#include +#include +#include + +enum qnap_mcu_err_led_mode { + QNAP_MCU_ERR_LED_ON =3D 0, + QNAP_MCU_ERR_LED_OFF =3D 1, + QNAP_MCU_ERR_LED_BLINK_FAST =3D 2, + QNAP_MCU_ERR_LED_BLINK_SLOW =3D 3, +}; + +struct qnap_mcu_err_led { + struct qnap_mcu *mcu; + struct led_classdev cdev; + char name[LED_MAX_NAME_SIZE]; + u8 num; + u8 mode; +}; + +static inline struct qnap_mcu_err_led * + cdev_to_qnap_mcu_err_led(struct led_classdev *led_cdev) +{ + return container_of(led_cdev, struct qnap_mcu_err_led, cdev); +} + +static int qnap_mcu_err_led_set(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + struct qnap_mcu_err_led *err_led =3D cdev_to_qnap_mcu_err_led(led_cdev); + u8 cmd[] =3D { '@', 'R', '0' + err_led->num, '0' }; + + /* Don't disturb a possible set blink-mode if LED stays on */ + if (brightness !=3D 0 && err_led->mode >=3D QNAP_MCU_ERR_LED_BLINK_FAST) + return 0; + + err_led->mode =3D brightness ? QNAP_MCU_ERR_LED_ON : QNAP_MCU_ERR_LED_OFF; + cmd[3] =3D '0' + err_led->mode; + + return qnap_mcu_exec_with_ack(err_led->mcu, cmd, sizeof(cmd)); +} + +static int qnap_mcu_err_led_blink_set(struct led_classdev *led_cdev, + unsigned long *delay_on, + unsigned long *delay_off) +{ + struct qnap_mcu_err_led *err_led =3D cdev_to_qnap_mcu_err_led(led_cdev); + u8 cmd[] =3D { '@', 'R', '0' + err_led->num, '0' }; + + /* LED is off, nothing to do */ + if (err_led->mode =3D=3D QNAP_MCU_ERR_LED_OFF) + return 0; + + if (*delay_on < 500) { + *delay_on =3D 100; + *delay_off =3D 100; + err_led->mode =3D QNAP_MCU_ERR_LED_BLINK_FAST; + } else { + *delay_on =3D 500; + *delay_off =3D 500; + err_led->mode =3D QNAP_MCU_ERR_LED_BLINK_SLOW; + } + + cmd[3] =3D '0' + err_led->mode; + + return qnap_mcu_exec_with_ack(err_led->mcu, cmd, sizeof(cmd)); +} + +static int qnap_mcu_register_err_led(struct device *dev, struct qnap_mcu *= mcu, int num_err_led) +{ + struct qnap_mcu_err_led *err_led; + int ret; + + err_led =3D devm_kzalloc(dev, sizeof(*err_led), GFP_KERNEL); + if (!err_led) + return -ENOMEM; + + err_led->mcu =3D mcu; + err_led->num =3D num_err_led; + err_led->mode =3D QNAP_MCU_ERR_LED_OFF; + + scnprintf(err_led->name, LED_MAX_NAME_SIZE, "hdd%d:red:status", num_err_l= ed + 1); + err_led->cdev.name =3D err_led->name; + + err_led->cdev.brightness_set_blocking =3D qnap_mcu_err_led_set; + err_led->cdev.blink_set =3D qnap_mcu_err_led_blink_set; + err_led->cdev.brightness =3D 0; + err_led->cdev.max_brightness =3D 1; + + ret =3D devm_led_classdev_register(dev, &err_led->cdev); + if (ret) + return ret; + + return qnap_mcu_err_led_set(&err_led->cdev, 0); +} + +enum qnap_mcu_usb_led_mode { + QNAP_MCU_USB_LED_ON =3D 1, + QNAP_MCU_USB_LED_OFF =3D 3, + QNAP_MCU_USB_LED_BLINK =3D 2, +}; + +struct qnap_mcu_usb_led { + struct qnap_mcu *mcu; + struct led_classdev cdev; + u8 mode; +}; + +static inline struct qnap_mcu_usb_led * + cdev_to_qnap_mcu_usb_led(struct led_classdev *led_cdev) +{ + return container_of(led_cdev, struct qnap_mcu_usb_led, cdev); +} + +static int qnap_mcu_usb_led_set(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + struct qnap_mcu_usb_led *usb_led =3D cdev_to_qnap_mcu_usb_led(led_cdev); + u8 cmd[] =3D { '@', 'C', 0 }; + + /* Don't disturb a possible set blink-mode if LED stays on */ + if (brightness !=3D 0 && usb_led->mode =3D=3D QNAP_MCU_USB_LED_BLINK) + return 0; + + usb_led->mode =3D brightness ? QNAP_MCU_USB_LED_ON : QNAP_MCU_USB_LED_OFF; + + /* + * Byte 3 is shared between the usb led target on/off/blink + * and also the buzzer control (in the input driver) + */ + cmd[2] =3D 'D' + usb_led->mode; + + return qnap_mcu_exec_with_ack(usb_led->mcu, cmd, sizeof(cmd)); +} + +static int qnap_mcu_usb_led_blink_set(struct led_classdev *led_cdev, + unsigned long *delay_on, + unsigned long *delay_off) +{ + struct qnap_mcu_usb_led *usb_led =3D cdev_to_qnap_mcu_usb_led(led_cdev); + u8 cmd[] =3D { '@', 'C', 0 }; + + /* LED is off, nothing to do */ + if (usb_led->mode =3D=3D QNAP_MCU_USB_LED_OFF) + return 0; + + *delay_on =3D 250; + *delay_off =3D 250; + usb_led->mode =3D QNAP_MCU_USB_LED_BLINK; + + /* + * Byte 3 is shared between the USB LED target on/off/blink + * and also the buzzer control (in the input driver) + */ + cmd[2] =3D 'D' + usb_led->mode; + + return qnap_mcu_exec_with_ack(usb_led->mcu, cmd, sizeof(cmd)); +} + +static int qnap_mcu_register_usb_led(struct device *dev, struct qnap_mcu *= mcu) +{ + struct qnap_mcu_usb_led *usb_led; + int ret; + + usb_led =3D devm_kzalloc(dev, sizeof(*usb_led), GFP_KERNEL); + if (!usb_led) + return -ENOMEM; + + usb_led->mcu =3D mcu; + usb_led->mode =3D QNAP_MCU_USB_LED_OFF; + usb_led->cdev.name =3D "usb:blue:disk"; + usb_led->cdev.brightness_set_blocking =3D qnap_mcu_usb_led_set; + usb_led->cdev.blink_set =3D qnap_mcu_usb_led_blink_set; + usb_led->cdev.brightness =3D 0; + usb_led->cdev.max_brightness =3D 1; + + ret =3D devm_led_classdev_register(dev, &usb_led->cdev); + if (ret) + return ret; + + return qnap_mcu_usb_led_set(&usb_led->cdev, 0); +} + +static int qnap_mcu_leds_probe(struct platform_device *pdev) +{ + struct qnap_mcu *mcu =3D dev_get_drvdata(pdev->dev.parent); + const struct qnap_mcu_variant *variant =3D pdev->dev.platform_data; + int ret; + + for (int i =3D 0; i < variant->num_drives; i++) { + ret =3D qnap_mcu_register_err_led(&pdev->dev, mcu, i); + if (ret) + return dev_err_probe(&pdev->dev, ret, + "failed to register error LED %d\n", i); + } + + if (variant->usb_led) { + ret =3D qnap_mcu_register_usb_led(&pdev->dev, mcu); + if (ret) + return dev_err_probe(&pdev->dev, ret, + "failed to register USB LED\n"); + } + + return 0; +} + +static struct platform_driver qnap_mcu_leds_driver =3D { + .probe =3D qnap_mcu_leds_probe, + .driver =3D { + .name =3D "qnap-mcu-leds", + }, +}; +module_platform_driver(qnap_mcu_leds_driver); + +MODULE_ALIAS("platform:qnap-mcu-leds"); +MODULE_AUTHOR("Heiko Stuebner "); +MODULE_DESCRIPTION("QNAP MCU LEDs driver"); +MODULE_LICENSE("GPL"); --=20 2.45.2 From nobody Sun Nov 24 04:03:27 2024 Received: from gloria.sntech.de (gloria.sntech.de [185.11.138.130]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 765C2200CA0; Thu, 7 Nov 2024 11:47:56 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=185.11.138.130 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1730980078; cv=none; b=OC9nUF2e1qObzzY6S+nYUZX3SmPpZE2cX038Kgl7N/J1f6VR8meYdSxs06Gws8Xh65UYOkjnFYwx7LrPeGdsuBIltq0r1f0p3unRhCfKYaMTq/TNmZ7bV8YUq3xI0yiC0u6zK8DnZtunsMNQewjzndgG9btCHkCmJHL29bxH+Ow= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1730980078; c=relaxed/simple; bh=ekP+J+Bhi72x0ML7mo8kmHopyu1e3X1/lyNPZFS4Z1Q=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=KEUjzFk249UgYbPJXneF31eml7NfewVtYIVJkePp8vmQiIasy6AdYmo7Ra5N8goArWqx27Be8wxaOirwlNcP4zPYWKDlBnZvjX3SqxYiIQJ0c67HUWJ2M/r6QNs3KUlFyaHb6kcaKY8AQpqgPPS45jKHIHb6Aq02Ko+G4vsPAdU= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=sntech.de; spf=pass smtp.mailfrom=sntech.de; dkim=pass (2048-bit key) header.d=sntech.de header.i=@sntech.de header.b=L1l1ohYz; arc=none smtp.client-ip=185.11.138.130 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=sntech.de Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=sntech.de Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=sntech.de header.i=@sntech.de header.b="L1l1ohYz" DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=sntech.de; s=gloria202408; h=Content-Transfer-Encoding:MIME-Version:References: In-Reply-To:Message-ID:Date:Subject:Cc:To:From:Sender:Reply-To:Content-Type: Content-ID:Content-Description:Resent-Date:Resent-From:Resent-Sender: Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help:List-Unsubscribe: List-Subscribe:List-Post:List-Owner:List-Archive; bh=AkbOc3cbibJ6pZjyluyM/+M+k4gt1KmWg6RTkksjTKs=; b=L1l1ohYzJNoXAmGPs556J58WGO /K78ADjq4sdMlLWZxpX98XW0Qe2wi5Sy5/zmFYMXLEDfa4uE51JiVuODf9s/n2xkOAzg/goUHW6GQ uLQDwCGCIxznk3T88niDGh/q2tltu4JFz77ipJOxuqfsZur63CNjlxQwCRwMqd2+N54p4PNUxEKeH PaF2Owy/4YpOeZ56qLt/D9rQFe4J2qtCjDIWD1gtIbI0x93X1PyAbwsXapzxo5XBKPEDEJF53JrTu BvFrwMgrZBEYXYfmmLFXwx2sPEZhpYN7aaaAj4BWRHkj4pPjG5jIje01VFivFEzZoMU1d4LAD1pFF Mckza78w==; Received: from i53875b28.versanet.de ([83.135.91.40] helo=localhost.localdomain) by gloria.sntech.de with esmtpsa (TLS1.3) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.94.2) (envelope-from ) id 1t90z2-0005lF-TX; Thu, 07 Nov 2024 12:47:28 +0100 From: Heiko Stuebner To: lee@kernel.org, jikos@kernel.org, jic23@kernel.org Cc: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org, jdelvare@suse.com, linux@roeck-us.net, srinivas.pandruvada@linux.intel.com, bentiss@kernel.org, dmitry.torokhov@gmail.com, pavel@ucw.cz, ukleinek@debian.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-rockchip@lists.infradead.org, linux-input@vger.kernel.org, linux-iio@vger.kernel.org, linux-leds@vger.kernel.org, heiko@sntech.de Subject: [PATCH v9 6/9] Input: add driver for the input part of qnap-mcu devices Date: Thu, 7 Nov 2024 12:47:09 +0100 Message-ID: <20241107114712.538976-7-heiko@sntech.de> X-Mailer: git-send-email 2.45.2 In-Reply-To: <20241107114712.538976-1-heiko@sntech.de> References: <20241107114712.538976-1-heiko@sntech.de> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset="utf-8" The MCU controls the power-button and beeper, so expose them as input device. There is of course no interrupt line, so the status of the power-button needs to be polled. To generate an event the power-button also needs to be held for 1-2 seconds, so the polling interval does not need to be overly fast. Acked-by: Dmitry Torokhov Signed-off-by: Heiko Stuebner --- MAINTAINERS | 1 + drivers/input/misc/Kconfig | 12 +++ drivers/input/misc/Makefile | 1 + drivers/input/misc/qnap-mcu-input.c | 153 ++++++++++++++++++++++++++++ 4 files changed, 167 insertions(+) create mode 100644 drivers/input/misc/qnap-mcu-input.c diff --git a/MAINTAINERS b/MAINTAINERS index 9abea0772d2b..9e66441c50da 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -18881,6 +18881,7 @@ F: drivers/media/tuners/qm1d1c0042* QNAP MCU DRIVER M: Heiko Stuebner S: Maintained +F: drivers/input/misc/qnap-mcu-input.c F: drivers/leds/leds-qnap-mcu.c F: drivers/mfd/qnap-mcu.c F: include/linux/qnap-mcu.h diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 6a852c76331b..13d135257e06 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -917,6 +917,18 @@ config INPUT_HISI_POWERKEY To compile this driver as a module, choose M here: the module will be called hisi_powerkey. =20 +config INPUT_QNAP_MCU + tristate "Input Support for QNAP MCU controllers" + depends on MFD_QNAP_MCU + help + This option enables support for input elements available on + embedded controllers used in QNAP NAS devices. + + This includes a polled power-button as well as a beeper. + + To compile this driver as a module, choose M here: the + module will be called qnap-mcu-input. + config INPUT_RAVE_SP_PWRBUTTON tristate "RAVE SP Power button Driver" depends on RAVE_SP_CORE diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 4f7f736831ba..6d91804d0a6f 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -68,6 +68,7 @@ obj-$(CONFIG_INPUT_PMIC8XXX_PWRKEY) +=3D pmic8xxx-pwrkey.o obj-$(CONFIG_INPUT_POWERMATE) +=3D powermate.o obj-$(CONFIG_INPUT_PWM_BEEPER) +=3D pwm-beeper.o obj-$(CONFIG_INPUT_PWM_VIBRA) +=3D pwm-vibra.o +obj-$(CONFIG_INPUT_QNAP_MCU) +=3D qnap-mcu-input.o obj-$(CONFIG_INPUT_RAVE_SP_PWRBUTTON) +=3D rave-sp-pwrbutton.o obj-$(CONFIG_INPUT_RB532_BUTTON) +=3D rb532_button.o obj-$(CONFIG_INPUT_REGULATOR_HAPTIC) +=3D regulator-haptic.o diff --git a/drivers/input/misc/qnap-mcu-input.c b/drivers/input/misc/qnap-= mcu-input.c new file mode 100644 index 000000000000..76e62f0816c1 --- /dev/null +++ b/drivers/input/misc/qnap-mcu-input.c @@ -0,0 +1,153 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/* + * Driver for input events on QNAP-MCUs + * + * Copyright (C) 2024 Heiko Stuebner + */ + +#include +#include +#include +#include +#include +#include + +/* + * The power-key needs to be pressed for a while to create an event, + * so there is no use for overly frequent polling. + */ +#define POLL_INTERVAL 500 + +struct qnap_mcu_input_dev { + struct input_dev *input; + struct qnap_mcu *mcu; + struct device *dev; + + struct work_struct beep_work; + int beep_type; +}; + +static void qnap_mcu_input_poll(struct input_dev *input) +{ + struct qnap_mcu_input_dev *idev =3D input_get_drvdata(input); + static const u8 cmd[] =3D { '@', 'C', 'V' }; + u8 reply[4]; + int state, ret; + + /* poll the power button */ + ret =3D qnap_mcu_exec(idev->mcu, cmd, sizeof(cmd), reply, sizeof(reply)); + if (ret) + return; + + /* First bytes must mirror the sent command */ + if (memcmp(cmd, reply, sizeof(cmd))) { + dev_err(idev->dev, "malformed data received\n"); + return; + } + + state =3D reply[3] - 0x30; + input_event(input, EV_KEY, KEY_POWER, state); + input_sync(input); +} + +static void qnap_mcu_input_beeper_work(struct work_struct *work) +{ + struct qnap_mcu_input_dev *idev =3D + container_of(work, struct qnap_mcu_input_dev, beep_work); + const u8 cmd[] =3D { '@', 'C', (idev->beep_type =3D=3D SND_TONE) ? '3' : = '2' }; + + qnap_mcu_exec_with_ack(idev->mcu, cmd, sizeof(cmd)); +} + +static int qnap_mcu_input_event(struct input_dev *input, unsigned int type, + unsigned int code, int value) +{ + struct qnap_mcu_input_dev *idev =3D input_get_drvdata(input); + + if (type !=3D EV_SND || (code !=3D SND_BELL && code !=3D SND_TONE)) + return -EOPNOTSUPP; + + if (value < 0) + return -EINVAL; + + /* beep runtime is determined by the MCU */ + if (value =3D=3D 0) + return 0; + + /* Schedule work to actually turn the beeper on */ + idev->beep_type =3D code; + schedule_work(&idev->beep_work); + + return 0; +} + +static void qnap_mcu_input_close(struct input_dev *input) +{ + struct qnap_mcu_input_dev *idev =3D input_get_drvdata(input); + + cancel_work_sync(&idev->beep_work); +} + +static int qnap_mcu_input_probe(struct platform_device *pdev) +{ + struct qnap_mcu *mcu =3D dev_get_drvdata(pdev->dev.parent); + struct qnap_mcu_input_dev *idev; + struct device *dev =3D &pdev->dev; + struct input_dev *input; + int ret; + + idev =3D devm_kzalloc(dev, sizeof(*idev), GFP_KERNEL); + if (!idev) + return -ENOMEM; + + input =3D devm_input_allocate_device(dev); + if (!input) + return dev_err_probe(dev, -ENOMEM, "no memory for input device\n"); + + idev->input =3D input; + idev->dev =3D dev; + idev->mcu =3D mcu; + + input_set_drvdata(input, idev); + + input->name =3D "qnap-mcu"; + input->phys =3D "qnap-mcu-input/input0"; + input->id.bustype =3D BUS_HOST; + input->id.vendor =3D 0x0001; + input->id.product =3D 0x0001; + input->id.version =3D 0x0100; + input->event =3D qnap_mcu_input_event; + input->close =3D qnap_mcu_input_close; + + input_set_capability(input, EV_KEY, KEY_POWER); + input_set_capability(input, EV_SND, SND_BELL); + input_set_capability(input, EV_SND, SND_TONE); + + INIT_WORK(&idev->beep_work, qnap_mcu_input_beeper_work); + + ret =3D input_setup_polling(input, qnap_mcu_input_poll); + if (ret) + return dev_err_probe(dev, ret, "unable to set up polling\n"); + + input_set_poll_interval(input, POLL_INTERVAL); + + ret =3D input_register_device(input); + if (ret) + return dev_err_probe(dev, ret, "unable to register input device\n"); + + return 0; +} + +static struct platform_driver qnap_mcu_input_driver =3D { + .probe =3D qnap_mcu_input_probe, + .driver =3D { + .name =3D "qnap-mcu-input", + }, +}; +module_platform_driver(qnap_mcu_input_driver); + +MODULE_ALIAS("platform:qnap-mcu-input"); +MODULE_AUTHOR("Heiko Stuebner "); +MODULE_DESCRIPTION("QNAP MCU input driver"); +MODULE_LICENSE("GPL"); --=20 2.45.2 From nobody Sun Nov 24 04:03:27 2024 Received: from gloria.sntech.de (gloria.sntech.de [185.11.138.130]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 34D0F1EF934; Thu, 7 Nov 2024 11:47:56 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=185.11.138.130 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1730980078; cv=none; b=Rco6gxgbqclblr2lUOeT2bUqq57LUevY6EFybZxj6wQbCxmDallgPUIEXMyFGX5niI0jSAHtIJhnbDLyvpLpA43QTLDb7lOnNiET98bKDOiAyjqmXvBmnd3gy2jt9fwDGBv+2UY2oH/hO/j7J0DnaKofriirKqtkIaqsqjsrxHo= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1730980078; c=relaxed/simple; bh=nr3hhchgbJXU3zKrI1mTUMWVwAV8/ckc/EyxldarVYQ=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=NY7p64+1T0Ydy23XScezo2ZWCGO4PHjiedPNQVuYj7dGYQoI2HKaR5XzxN2dgjoU7DNhExt1QAxvvRBxEtquR6l+kFdx/Vsufpt/6Otvr+gHPtXvmUkR58srdeUX3FjhaxKUuIq5xQPHSAhKEuzkDSINmCNGH8wgYPBf2Cq0c0Q= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=sntech.de; spf=pass smtp.mailfrom=sntech.de; dkim=pass (2048-bit key) header.d=sntech.de header.i=@sntech.de header.b=nc1xACRM; arc=none smtp.client-ip=185.11.138.130 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=sntech.de Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=sntech.de Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=sntech.de header.i=@sntech.de header.b="nc1xACRM" DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=sntech.de; s=gloria202408; h=Content-Transfer-Encoding:MIME-Version:References: In-Reply-To:Message-ID:Date:Subject:Cc:To:From:Sender:Reply-To:Content-Type: Content-ID:Content-Description:Resent-Date:Resent-From:Resent-Sender: Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help:List-Unsubscribe: List-Subscribe:List-Post:List-Owner:List-Archive; bh=jC0GDxJY4SJFyWBJ52PjtrRBRAUKVurzeGeMP459lcU=; b=nc1xACRM+sGtq+lREzqlVPG/Fk owQXDgv8tcb9f7Tghm4yFf6mfXYWaTPJ+RuJI0RXk/riYJloo3LiccNMuoliVj8Jo/JQc7Nk3yN4v GvOQ5SmFqvV4wsW8gG8g4svGdOYaqcUhsFxxrZowEa9Ybg74gjxQE/w+j+9Tzc4/IRlg2z0vnoHfB ttnaw+h5VLDUNEa42a9WiwtuhfF6CH99m/d+ozuRoH0YLLzeRRNndZzuzhonX5KjoZj5IxJRqcD9B dzrhOKXUhVRh1VxYY0yH1FKHpMWHcWKPuiUPrp0w8JwOpqxNf1M5i7JsxpOo3UgzMqiwOnQ+o5T5E lHQgRO8w==; Received: from i53875b28.versanet.de ([83.135.91.40] helo=localhost.localdomain) by gloria.sntech.de with esmtpsa (TLS1.3) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.94.2) (envelope-from ) id 1t90z3-0005lF-O7; Thu, 07 Nov 2024 12:47:29 +0100 From: Heiko Stuebner To: lee@kernel.org, jikos@kernel.org, jic23@kernel.org Cc: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org, jdelvare@suse.com, linux@roeck-us.net, srinivas.pandruvada@linux.intel.com, bentiss@kernel.org, dmitry.torokhov@gmail.com, pavel@ucw.cz, ukleinek@debian.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-rockchip@lists.infradead.org, linux-input@vger.kernel.org, linux-iio@vger.kernel.org, linux-leds@vger.kernel.org, heiko@sntech.de Subject: [PATCH v9 7/9] hwmon: add driver for the hwmon parts of qnap-mcu devices Date: Thu, 7 Nov 2024 12:47:10 +0100 Message-ID: <20241107114712.538976-8-heiko@sntech.de> X-Mailer: git-send-email 2.45.2 In-Reply-To: <20241107114712.538976-1-heiko@sntech.de> References: <20241107114712.538976-1-heiko@sntech.de> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset="utf-8" The MCU can be found on network-attached-storage devices made by QNAP and provides access to fan control including reading back its RPM as well as reading the temperature of the NAS case. Acked-by: Guenter Roeck Signed-off-by: Heiko Stuebner --- Documentation/hwmon/index.rst | 1 + Documentation/hwmon/qnap-mcu-hwmon.rst | 27 ++ MAINTAINERS | 1 + drivers/hwmon/Kconfig | 12 + drivers/hwmon/Makefile | 1 + drivers/hwmon/qnap-mcu-hwmon.c | 364 +++++++++++++++++++++++++ 6 files changed, 406 insertions(+) create mode 100644 Documentation/hwmon/qnap-mcu-hwmon.rst create mode 100644 drivers/hwmon/qnap-mcu-hwmon.c diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index ea3b5be8fe4f..e134a4f8558f 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -199,6 +199,7 @@ Hardware Monitoring Kernel Drivers pxe1610 pwm-fan q54sj108a2 + qnap-mcu-hwmon raspberrypi-hwmon sbrmi sbtsi_temp diff --git a/Documentation/hwmon/qnap-mcu-hwmon.rst b/Documentation/hwmon/q= nap-mcu-hwmon.rst new file mode 100644 index 000000000000..83407e3408f2 --- /dev/null +++ b/Documentation/hwmon/qnap-mcu-hwmon.rst @@ -0,0 +1,27 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +Kernel driver qnap-mcu-hwmon +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D + +This driver enables the use of the hardware monitoring and fan control +of the MCU used on some QNAP network attached storage devices. + +Author: Heiko Stuebner + +Description +----------- + +The driver implements a simple interface for driving the fan controlled by +setting its PWM output value and exposes the fan rpm and case-temperature +to user space through hwmon's sysfs interface. + +The fan rotation speed returned via the optional 'fan1_input' is calculated +inside the MCU device. + +The driver provides the following sensor accesses in sysfs: + +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D =3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D +fan1_input ro fan tachometer speed in RPM +pwm1 rw relative speed (0-255), 255=3Dmax. speed. +temp1_input ro Measured temperature in millicelsius +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D =3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D diff --git a/MAINTAINERS b/MAINTAINERS index 9e66441c50da..4e6719d15d75 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -18881,6 +18881,7 @@ F: drivers/media/tuners/qm1d1c0042* QNAP MCU DRIVER M: Heiko Stuebner S: Maintained +F: drivers/hwmon/qnap-mcu-hwmon.c F: drivers/input/misc/qnap-mcu-input.c F: drivers/leds/leds-qnap-mcu.c F: drivers/mfd/qnap-mcu.c diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 08a3c863f80a..74d33a96f7cc 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -1800,6 +1800,18 @@ config SENSORS_PWM_FAN This driver can also be built as a module. If so, the module will be called pwm-fan. =20 +config SENSORS_QNAP_MCU_HWMON + tristate "QNAP MCU hardware monitoring" + depends on MFD_QNAP_MCU + depends on THERMAL || THERMAL=3Dn + help + Say yes here to enable support for fan and temperature sensor + connected to a QNAP MCU, as found in a number of QNAP network + attached storage devices. + + This driver can also be built as a module. If so, the module + will be called qnap-mcu-hwmon. + config SENSORS_RASPBERRYPI_HWMON tristate "Raspberry Pi voltage monitor" depends on RASPBERRYPI_FIRMWARE || (COMPILE_TEST && !RASPBERRYPI_FIRMWARE) diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 9554d2fdcf7b..872f70f9902d 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -187,6 +187,7 @@ obj-$(CONFIG_SENSORS_POWERZ) +=3D powerz.o obj-$(CONFIG_SENSORS_POWR1220) +=3D powr1220.o obj-$(CONFIG_SENSORS_PT5161L) +=3D pt5161l.o obj-$(CONFIG_SENSORS_PWM_FAN) +=3D pwm-fan.o +obj-$(CONFIG_SENSORS_QNAP_MCU_HWMON) +=3D qnap-mcu-hwmon.o obj-$(CONFIG_SENSORS_RASPBERRYPI_HWMON) +=3D raspberrypi-hwmon.o obj-$(CONFIG_SENSORS_SBTSI) +=3D sbtsi_temp.o obj-$(CONFIG_SENSORS_SBRMI) +=3D sbrmi.o diff --git a/drivers/hwmon/qnap-mcu-hwmon.c b/drivers/hwmon/qnap-mcu-hwmon.c new file mode 100644 index 000000000000..29057514739c --- /dev/null +++ b/drivers/hwmon/qnap-mcu-hwmon.c @@ -0,0 +1,364 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/* + * Driver for hwmon elements found on QNAP-MCU devices + * + * Copyright (C) 2024 Heiko Stuebner + */ + +#include +#include +#include +#include +#include +#include +#include + +struct qnap_mcu_hwmon { + struct qnap_mcu *mcu; + struct device *dev; + + unsigned int pwm_min; + unsigned int pwm_max; + + struct fwnode_handle *fan_node; + unsigned int fan_state; + unsigned int fan_max_state; + unsigned int *fan_cooling_levels; + + struct thermal_cooling_device *cdev; + struct hwmon_chip_info info; +}; + +static int qnap_mcu_hwmon_get_rpm(struct qnap_mcu_hwmon *hwm) +{ + static const u8 cmd[] =3D { '@', 'F', 'A' }; + u8 reply[6]; + int ret; + + /* poll the fan rpm */ + ret =3D qnap_mcu_exec(hwm->mcu, cmd, sizeof(cmd), reply, sizeof(reply)); + if (ret) + return ret; + + /* First 2 bytes must mirror the sent command */ + if (memcmp(cmd, reply, 2)) + return -EIO; + + return reply[4] * 30; +} + +static int qnap_mcu_hwmon_get_pwm(struct qnap_mcu_hwmon *hwm) +{ + static const u8 cmd[] =3D { '@', 'F', 'Z', '0' }; /* 0 =3D fan-id? */ + u8 reply[4]; + int ret; + + /* poll the fan pwm */ + ret =3D qnap_mcu_exec(hwm->mcu, cmd, sizeof(cmd), reply, sizeof(reply)); + if (ret) + return ret; + + /* First 3 bytes must mirror the sent command */ + if (memcmp(cmd, reply, 3)) + return -EIO; + + return reply[3]; +} + +static int qnap_mcu_hwmon_set_pwm(struct qnap_mcu_hwmon *hwm, u8 pwm) +{ + const u8 cmd[] =3D { '@', 'F', 'W', '0', pwm }; /* 0 =3D fan-id?, pwm 0-2= 55 */ + + /* set the fan pwm */ + return qnap_mcu_exec_with_ack(hwm->mcu, cmd, sizeof(cmd)); +} + +static int qnap_mcu_hwmon_get_temp(struct qnap_mcu_hwmon *hwm) +{ + static const u8 cmd[] =3D { '@', 'T', '3' }; + u8 reply[4]; + int ret; + + /* poll the fan rpm */ + ret =3D qnap_mcu_exec(hwm->mcu, cmd, sizeof(cmd), reply, sizeof(reply)); + if (ret) + return ret; + + /* First bytes must mirror the sent command */ + if (memcmp(cmd, reply, sizeof(cmd))) + return -EIO; + + /* + * There is an unknown bit set in bit7. + * Bits [6:0] report the actual temperature as returned by the + * original qnap firmware-tools, so just drop bit7 for now. + */ + return (reply[3] & 0x7f) * 1000; +} + +static int qnap_mcu_hwmon_write(struct device *dev, enum hwmon_sensor_type= s type, + u32 attr, int channel, long val) +{ + struct qnap_mcu_hwmon *hwm =3D dev_get_drvdata(dev); + + switch (attr) { + case hwmon_pwm_input: + if (val < 0 || val > 255) + return -EINVAL; + + if (val !=3D 0) + val =3D clamp_val(val, hwm->pwm_min, hwm->pwm_max); + + return qnap_mcu_hwmon_set_pwm(hwm, val); + default: + return -EOPNOTSUPP; + } + + return 0; +} + +static int qnap_mcu_hwmon_read(struct device *dev, enum hwmon_sensor_types= type, + u32 attr, int channel, long *val) +{ + struct qnap_mcu_hwmon *hwm =3D dev_get_drvdata(dev); + int ret; + + switch (type) { + case hwmon_pwm: + switch (attr) { + case hwmon_pwm_input: + ret =3D qnap_mcu_hwmon_get_pwm(hwm); + if (ret < 0) + return ret; + + *val =3D ret; + return 0; + default: + return -EOPNOTSUPP; + } + case hwmon_fan: + ret =3D qnap_mcu_hwmon_get_rpm(hwm); + if (ret < 0) + return ret; + + *val =3D ret; + return 0; + case hwmon_temp: + ret =3D qnap_mcu_hwmon_get_temp(hwm); + if (ret < 0) + return ret; + + *val =3D ret; + return 0; + default: + return -EOPNOTSUPP; + } +} + +static umode_t qnap_mcu_hwmon_is_visible(const void *data, + enum hwmon_sensor_types type, + u32 attr, int channel) +{ + switch (type) { + case hwmon_temp: + return 0444; + + case hwmon_pwm: + return 0644; + + case hwmon_fan: + return 0444; + + default: + return 0; + } +} + +static const struct hwmon_ops qnap_mcu_hwmon_hwmon_ops =3D { + .is_visible =3D qnap_mcu_hwmon_is_visible, + .read =3D qnap_mcu_hwmon_read, + .write =3D qnap_mcu_hwmon_write, +}; + +/* thermal cooling device callbacks */ +static int qnap_mcu_hwmon_get_max_state(struct thermal_cooling_device *cde= v, + unsigned long *state) +{ + struct qnap_mcu_hwmon *hwm =3D cdev->devdata; + + if (!hwm) + return -EINVAL; + + *state =3D hwm->fan_max_state; + + return 0; +} + +static int qnap_mcu_hwmon_get_cur_state(struct thermal_cooling_device *cde= v, + unsigned long *state) +{ + struct qnap_mcu_hwmon *hwm =3D cdev->devdata; + + if (!hwm) + return -EINVAL; + + *state =3D hwm->fan_state; + + return 0; +} + +static int qnap_mcu_hwmon_set_cur_state(struct thermal_cooling_device *cde= v, + unsigned long state) +{ + struct qnap_mcu_hwmon *hwm =3D cdev->devdata; + int ret; + + if (!hwm || state > hwm->fan_max_state) + return -EINVAL; + + if (state =3D=3D hwm->fan_state) + return 0; + + ret =3D qnap_mcu_hwmon_set_pwm(hwm, hwm->fan_cooling_levels[state]); + if (ret) + return ret; + + hwm->fan_state =3D state; + + return ret; +} + +static const struct thermal_cooling_device_ops qnap_mcu_hwmon_cooling_ops = =3D { + .get_max_state =3D qnap_mcu_hwmon_get_max_state, + .get_cur_state =3D qnap_mcu_hwmon_get_cur_state, + .set_cur_state =3D qnap_mcu_hwmon_set_cur_state, +}; + +static void devm_fan_node_release(void *data) +{ + struct qnap_mcu_hwmon *hwm =3D data; + + fwnode_handle_put(hwm->fan_node); +} + +static int qnap_mcu_hwmon_get_cooling_data(struct device *dev, struct qnap= _mcu_hwmon *hwm) +{ + struct fwnode_handle *fwnode; + int num, i, ret; + + fwnode =3D device_get_named_child_node(dev->parent, "fan-0"); + if (!fwnode) + return 0; + + /* if we found the fan-node, we're keeping it until device-unbind */ + hwm->fan_node =3D fwnode; + ret =3D devm_add_action_or_reset(dev, devm_fan_node_release, hwm); + if (ret) + return ret; + + num =3D fwnode_property_count_u32(fwnode, "cooling-levels"); + if (num <=3D 0) + return dev_err_probe(dev, num ? : -EINVAL, + "Failed to count elements in 'cooling-levels'\n"); + + hwm->fan_cooling_levels =3D devm_kcalloc(dev, num, sizeof(u32), + GFP_KERNEL); + if (!hwm->fan_cooling_levels) + return -ENOMEM; + + ret =3D fwnode_property_read_u32_array(fwnode, "cooling-levels", + hwm->fan_cooling_levels, num); + if (ret) + return dev_err_probe(dev, ret, "Failed to read 'cooling-levels'\n"); + + for (i =3D 0; i < num; i++) { + if (hwm->fan_cooling_levels[i] > hwm->pwm_max) + return dev_err_probe(dev, -EINVAL, "fan state[%d]:%d > %d\n", i, + hwm->fan_cooling_levels[i], hwm->pwm_max); + } + + hwm->fan_max_state =3D num - 1; + + return 0; +} + +static const struct hwmon_channel_info * const qnap_mcu_hwmon_channels[] = =3D { + HWMON_CHANNEL_INFO(pwm, HWMON_PWM_INPUT), + HWMON_CHANNEL_INFO(fan, HWMON_F_INPUT), + HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT), + NULL +}; + +static int qnap_mcu_hwmon_probe(struct platform_device *pdev) +{ + struct qnap_mcu *mcu =3D dev_get_drvdata(pdev->dev.parent); + const struct qnap_mcu_variant *variant =3D pdev->dev.platform_data; + struct qnap_mcu_hwmon *hwm; + struct thermal_cooling_device *cdev; + struct device *dev =3D &pdev->dev; + struct device *hwmon; + int ret; + + hwm =3D devm_kzalloc(dev, sizeof(*hwm), GFP_KERNEL); + if (!hwm) + return -ENOMEM; + + hwm->mcu =3D mcu; + hwm->dev =3D &pdev->dev; + hwm->pwm_min =3D variant->fan_pwm_min; + hwm->pwm_max =3D variant->fan_pwm_max; + + platform_set_drvdata(pdev, hwm); + + /* + * Set duty cycle to maximum allowed. + */ + ret =3D qnap_mcu_hwmon_set_pwm(hwm, hwm->pwm_max); + if (ret) + return ret; + + hwm->info.ops =3D &qnap_mcu_hwmon_hwmon_ops; + hwm->info.info =3D qnap_mcu_hwmon_channels; + + ret =3D qnap_mcu_hwmon_get_cooling_data(dev, hwm); + if (ret) + return ret; + + hwm->fan_state =3D hwm->fan_max_state; + + hwmon =3D devm_hwmon_device_register_with_info(dev, "qnapmcu", + hwm, &hwm->info, NULL); + if (IS_ERR(hwmon)) + return dev_err_probe(dev, PTR_ERR(hwmon), "Failed to register hwmon devi= ce\n"); + + /* + * Only register cooling device when we found cooling-levels. + * qnap_mcu_hwmon_get_cooling_data() will fail when reading malformed + * levels and only succeed with either no or correct cooling levels. + */ + if (IS_ENABLED(CONFIG_THERMAL) && hwm->fan_cooling_levels) { + cdev =3D devm_thermal_of_cooling_device_register(dev, + to_of_node(hwm->fan_node), "qnap-mcu-hwmon", + hwm, &qnap_mcu_hwmon_cooling_ops); + if (IS_ERR(cdev)) + return dev_err_probe(dev, PTR_ERR(cdev), + "Failed to register qnap-mcu-hwmon as cooling device\n"); + hwm->cdev =3D cdev; + } + + return 0; +} + +static struct platform_driver qnap_mcu_hwmon_driver =3D { + .probe =3D qnap_mcu_hwmon_probe, + .driver =3D { + .name =3D "qnap-mcu-hwmon", + }, +}; +module_platform_driver(qnap_mcu_hwmon_driver); + +MODULE_ALIAS("platform:qnap-mcu-hwmon"); +MODULE_AUTHOR("Heiko Stuebner "); +MODULE_DESCRIPTION("QNAP MCU hwmon driver"); +MODULE_LICENSE("GPL"); --=20 2.45.2 From nobody Sun Nov 24 04:03:27 2024 Received: from gloria.sntech.de (gloria.sntech.de [185.11.138.130]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 982932076A5; Thu, 7 Nov 2024 11:47:56 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=185.11.138.130 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1730980078; cv=none; b=oe/Xc/6k5pv0PQPuY/lYrp5cxfOdQ/l01p/c3JzJA8x6GVcTuSYcyAm9uHWeKdle75UbfvwpS8DyXhUpovngE0JuTAV5Nz466/HZQTWhtUO4vGL2xsdcfKTJjoy4QSFNk5acaF9gCtbEqrqGjzUR2XgXNEijL78vYKxMWLOU3PM= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1730980078; c=relaxed/simple; bh=7V9z8GpWh1h6jYTQK49Y2gITucVXURl5E73JrDwS5bk=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=qvv3PAJDwGztCuarCXKW7R7SR6/UKqttgadAY1sENCL4jazGRY5DtQV+zMeSd1jtSizvKftuIit0qP5v4sBZyFI9P0M0IXqkBtKfmw2HRrFoXiksu+Z7fATuqYrM68s8iIfqpHdB7hyAPJs6wiwXeFP3fDNxElRMPpOrOEDgZwg= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=sntech.de; spf=pass smtp.mailfrom=sntech.de; dkim=pass (2048-bit key) header.d=sntech.de header.i=@sntech.de header.b=POjBss8m; arc=none smtp.client-ip=185.11.138.130 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=sntech.de Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=sntech.de Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=sntech.de header.i=@sntech.de header.b="POjBss8m" DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=sntech.de; s=gloria202408; h=Content-Transfer-Encoding:MIME-Version:References: In-Reply-To:Message-ID:Date:Subject:Cc:To:From:Sender:Reply-To:Content-Type: Content-ID:Content-Description:Resent-Date:Resent-From:Resent-Sender: Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help:List-Unsubscribe: List-Subscribe:List-Post:List-Owner:List-Archive; bh=ndhE9GV/weSv1b+P8Z17HWDaizYEypq9zFWjTm9iZPo=; b=POjBss8m/sLHoH+2OuxfvWQqsK 8FN+lz93gu8/NZcpt7+vKhLZNYTLNSxKWBT89OiNlQy5MnqzBV2ld1O+3IO/O/vbqb2m/hvEWL+3+ 3TQfzvwKUalwksU9rXJPCkkJe9So1y3HFZNsPYSPs1eyeDmtZ5V+hIHyCjLhR8EidXwnibaSY/NFe 1KMceGJ/zRT9OWQNmzCak5EmXdWoNWh9x4TNUkcciaOkk9VvA4dLHd4azapZqAYcZUUW7auU7QV+x WzBMONwGjp6AchpiCILskqyKLvFGH5VM6JTw/yTdLm41KyMBxRjaVMJXV7ooEUzDAuQwkKwazAW4E Wyc0RMzQ==; Received: from i53875b28.versanet.de ([83.135.91.40] helo=localhost.localdomain) by gloria.sntech.de with esmtpsa (TLS1.3) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.94.2) (envelope-from ) id 1t90z4-0005lF-In; Thu, 07 Nov 2024 12:47:30 +0100 From: Heiko Stuebner To: lee@kernel.org, jikos@kernel.org, jic23@kernel.org Cc: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org, jdelvare@suse.com, linux@roeck-us.net, srinivas.pandruvada@linux.intel.com, bentiss@kernel.org, dmitry.torokhov@gmail.com, pavel@ucw.cz, ukleinek@debian.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-rockchip@lists.infradead.org, linux-input@vger.kernel.org, linux-iio@vger.kernel.org, linux-leds@vger.kernel.org, heiko@sntech.de Subject: [PATCH v9 8/9] arm64: dts: rockchip: hook up the MCU on the QNAP TS433 Date: Thu, 7 Nov 2024 12:47:11 +0100 Message-ID: <20241107114712.538976-9-heiko@sntech.de> X-Mailer: git-send-email 2.45.2 In-Reply-To: <20241107114712.538976-1-heiko@sntech.de> References: <20241107114712.538976-1-heiko@sntech.de> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset="utf-8" The MCU is an important part of the device functionality. It provides functionality like fan-control, more leds, etc and even more important without it, the NAS-device cannot even fully turned off. Hook up the serial device to its uart and hook into the thermal management to control the fan according to the cpu temperature. While the MCU also provides a temperature sensor for the case, this one is just polled and does not provide functionality for handling trip points in hardware, so a lot of polling would be involved. As the cpu is only cooled passively in these devices, it's temperature rising will indicate the temperature level of the system just earlier. Signed-off-by: Heiko Stuebner --- .../boot/dts/rockchip/rk3568-qnap-ts433.dts | 57 +++++++++++++++++++ 1 file changed, 57 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts b/arch/arm6= 4/boot/dts/rockchip/rk3568-qnap-ts433.dts index e601d9271ba8..4bc5f5691d45 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts @@ -483,6 +483,54 @@ rgmii_phy0: ethernet-phy@0 { }; }; =20 +/* + * The MCU can provide system temperature too, but only by polling and of + * course also cannot set trip points. So attach to the cpu thermal-zone + * instead to control the fan. + */ +&cpu_thermal { + trips { + case_fan0: case-fan0 { + hysteresis =3D <2000>; + temperature =3D <35000>; + type =3D "active"; + }; + + case_fan1: case-fan1 { + hysteresis =3D <2000>; + temperature =3D <45000>; + type =3D "active"; + }; + + case_fan2: case-fan2 { + hysteresis =3D <2000>; + temperature =3D <65000>; + type =3D "active"; + }; + }; + + cooling-maps { + /* + * Always provide some air movement, due to small case + * full of harddrives. + */ + map1 { + cooling-device =3D <&fan THERMAL_NO_LIMIT 1>; + trip =3D <&case_fan0>; + }; + + map2 { + cooling-device =3D <&fan 2 3>; + trip =3D <&case_fan1>; + }; + + map3 { + cooling-device =3D <&fan 4 THERMAL_NO_LIMIT>; + trip =3D <&case_fan2>; + }; + }; +}; + &pcie30phy { data-lanes =3D <1 2>; status =3D "okay"; @@ -582,6 +630,15 @@ &tsadc { */ &uart0 { status =3D "okay"; + + mcu { + compatible =3D "qnap,ts433-mcu"; + + fan: fan-0 { + #cooling-cells =3D <2>; + cooling-levels =3D <0 64 89 128 166 204 221 238>; + }; + }; }; =20 /* --=20 2.45.2 From nobody Sun Nov 24 04:03:27 2024 Received: from gloria.sntech.de (gloria.sntech.de [185.11.138.130]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 35E0920C316; Thu, 7 Nov 2024 11:47:57 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=185.11.138.130 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1730980078; cv=none; b=jdOnUmojd5thkNNvgGli51pwcjImFgYMHkZ2gfBvykcJglmAu930+3by0dYwg5cPEcWYRwoMvIauVfsHc957GdOAmi+eWqD8HtjPAcAoWQfzmqEP+zXHmAZY1Z0xOKWyg9doy2IC9vyMKuIcvlQxe2UiMd2b/225u3bZsnIW5Xs= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1730980078; c=relaxed/simple; bh=vkvMOSF4aNxkqQ3yhK2SSJFRPZkSaMMmDUMSAgTZd4I=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=tBgrmi5KkoEZg9rxrsvHnLgFEnVtRQbwacBMmPrOM1bo7cDbKXqtk3cW0EW7RFb4PCdWSN/3CuSoU+8dY1WGUb4azsEZQam+jKugHjZqB2XqnZ9mOLxNnOARgKaEp/ZcUve5dDDsA/ePn/bUWh/gZOwaAuUmb2b4E0N5vMJJ4kA= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=sntech.de; spf=pass smtp.mailfrom=sntech.de; dkim=pass (2048-bit key) header.d=sntech.de header.i=@sntech.de header.b=E1W78ZCe; arc=none smtp.client-ip=185.11.138.130 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=sntech.de Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=sntech.de Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=sntech.de header.i=@sntech.de header.b="E1W78ZCe" DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=sntech.de; s=gloria202408; h=Content-Transfer-Encoding:MIME-Version:References: In-Reply-To:Message-ID:Date:Subject:Cc:To:From:Sender:Reply-To:Content-Type: Content-ID:Content-Description:Resent-Date:Resent-From:Resent-Sender: Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help:List-Unsubscribe: List-Subscribe:List-Post:List-Owner:List-Archive; bh=9/h7WdzZG9vjrQc7OkWmpZJ7JRIc5Cq4to1XZ7bI6xI=; b=E1W78ZCeCgemPK0BsMm3lPTBvM kfXODipqL7t/BzoWn95KOdCT1wx4Y5qdj857R1BozY9A+3h/ol0/Ebom8AQsSlQ4MnSTm5JodrDu6 aYfzS5CzEcBgdfmUiHh7wKCczn7HVVoTh91EFcq/yjIu4VcuiuCdNT0tEpMVoc2txQHENW4MHTFlq FP+Rbygfg3/0tKHAW+UuqTtv51KUBzair3NZDLlXeqi2syacrgi2fjXTnGBraKkTT/h2Ebwl3Hz7+ elRiG/UqtIidFYdNF/0nMAFHILjl1ZjWAjFYF2xt7eRR2ku0tIBWNqwugpEPX1hmZ8fIyo2bbsyzT fR0q5K7Q==; Received: from i53875b28.versanet.de ([83.135.91.40] helo=localhost.localdomain) by gloria.sntech.de with esmtpsa (TLS1.3) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.94.2) (envelope-from ) id 1t90z5-0005lF-DJ; Thu, 07 Nov 2024 12:47:31 +0100 From: Heiko Stuebner To: lee@kernel.org, jikos@kernel.org, jic23@kernel.org Cc: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org, jdelvare@suse.com, linux@roeck-us.net, srinivas.pandruvada@linux.intel.com, bentiss@kernel.org, dmitry.torokhov@gmail.com, pavel@ucw.cz, ukleinek@debian.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-rockchip@lists.infradead.org, linux-input@vger.kernel.org, linux-iio@vger.kernel.org, linux-leds@vger.kernel.org, heiko@sntech.de Subject: [PATCH v9 9/9] arm64: dts: rockchip: set hdd led labels on qnap-ts433 Date: Thu, 7 Nov 2024 12:47:12 +0100 Message-ID: <20241107114712.538976-10-heiko@sntech.de> X-Mailer: git-send-email 2.45.2 In-Reply-To: <20241107114712.538976-1-heiko@sntech.de> References: <20241107114712.538976-1-heiko@sntech.de> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset="utf-8" The automatically generated names for the LEDs from color and function do not match nicely for the 4 hdds, so set them manually per the label property to also match the LEDs generated from the MCU. Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts b/arch/arm6= 4/boot/dts/rockchip/rk3568-qnap-ts433.dts index 4bc5f5691d45..7bd32d230ad2 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts @@ -50,6 +50,7 @@ led-0 { color =3D ; function =3D LED_FUNCTION_DISK; gpios =3D <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>; + label =3D "hdd1:green:disk"; linux,default-trigger =3D "disk-activity"; pinctrl-names =3D "default"; pinctrl-0 =3D <&hdd1_led_pin>; @@ -59,6 +60,7 @@ led-1 { color =3D ; function =3D LED_FUNCTION_DISK; gpios =3D <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>; + label =3D "hdd2:green:disk"; linux,default-trigger =3D "disk-activity"; pinctrl-names =3D "default"; pinctrl-0 =3D <&hdd2_led_pin>; @@ -68,6 +70,7 @@ led-2 { color =3D ; function =3D LED_FUNCTION_DISK; gpios =3D <&gpio1 RK_PD7 GPIO_ACTIVE_LOW>; + label =3D "hdd3:green:disk"; linux,default-trigger =3D "disk-activity"; pinctrl-names =3D "default"; pinctrl-0 =3D <&hdd3_led_pin>; @@ -77,6 +80,7 @@ led-3 { color =3D ; function =3D LED_FUNCTION_DISK; gpios =3D <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>; + label =3D "hdd4:green:disk"; linux,default-trigger =3D "disk-activity"; pinctrl-names =3D "default"; pinctrl-0 =3D <&hdd4_led_pin>; --=20 2.45.2