From nobody Sun Nov 24 12:15:29 2024 Received: from www530.your-server.de (www530.your-server.de [188.40.30.78]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id E2BE71D5AB2; Tue, 5 Nov 2024 14:24:46 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=188.40.30.78 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1730816690; cv=none; b=YYM74nDMhjk0ivrAnaDv/IUBT9IDuNTXQCDsCSoy/9RLXrrkSzFp0FFym3V56h8Qz2XOJ2HDreaP/8Ace9SCsq3v84onKwYvIM1IzH6ooUr4C3UiR+QhFTNOVmnWpzzNseTcfH3QbcfP2dZf5+GXxyNfTagyFfyzgpYwHaSIkso= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1730816690; c=relaxed/simple; bh=jloAkXqe5JFmFhB0Zv7JTbb7qpuv14n45ikCXl9nlLs=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:To:Cc; b=KuDupvfevSm0amaIjOT4/7Bk6EwzwKf/fCv0zdSxmhZz9AsgTo1Mzo3QHLtKrxm5EU7nlchr5jAA5l25Nq2utSJMQ04fQ1jD5v7/S5u/1S8smpG/mJ9TlESm58nhPo6TtPzQy9YU4PHFJywL8nNFcLxLIGQ4dmy4WqzZYAGTB9E= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=geanix.com; spf=pass smtp.mailfrom=geanix.com; dkim=pass (2048-bit key) header.d=geanix.com header.i=@geanix.com header.b=fAbbvoRm; arc=none smtp.client-ip=188.40.30.78 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=geanix.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=geanix.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=geanix.com header.i=@geanix.com header.b="fAbbvoRm" DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=geanix.com; s=default2211; h=Cc:To:Message-Id:Content-Transfer-Encoding:Content-Type: MIME-Version:Subject:Date:From:Sender:Reply-To:Content-ID:Content-Description :Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: In-Reply-To:References; bh=B2TbzasSipWhR1FdJvRQDldtLvGcjQd4ZD8ioLxtzsE=; b=fA bbvoRmjaP4bmZlqD4aTmR0w/MeJz6Lu5k6iZBAWKUzdDbyUgLAaJ/9i/87CDuFqIRMJ89IS0L7GI2 TtvIIN7Wiv1i/8voY4lL2Beh8FEevw0vyoiOjxRMMCSj/nZCxsTLMYRyc/Q7gebIUVNuJX4JmrDwW JXrgxYHeUBLXpoMt/CYhQWGnu4tAGJ/bNox/NTSxj386aeIJbMx6eG3w63jPCFuVxJw1Pb6pqsIR8 s85Unsr4f2PHOkqKhbF3DUHMvtOMdQfGR0R3xm7FI9Okfb4zf6QK761xPxn0TT7BdAckv8yyEFtK+ JzjsKuO/YpoeTMNhXBPDM7HGqj4GtMjA==; Received: from sslproxy01.your-server.de ([78.46.139.224]) by www530.your-server.de with esmtpsa (TLS1.3) tls TLS_AES_256_GCM_SHA384 (Exim 4.94.2) (envelope-from ) id 1t8KU7-000JBp-PN; Tue, 05 Nov 2024 15:24:43 +0100 Received: from [185.17.218.86] (helo=zen.localdomain) by sslproxy01.your-server.de with esmtpsa (TLS1.3) tls TLS_AES_256_GCM_SHA384 (Exim 4.96) (envelope-from ) id 1t8KU7-0002FW-08; Tue, 05 Nov 2024 15:24:43 +0100 From: Sean Nyekjaer Date: Tue, 05 Nov 2024 15:24:34 +0100 Subject: [PATCH v2] dt-bindings: can: convert tcan4x5x.txt to DT schema Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable Message-Id: <20241105-convert-tcan-v2-1-4b320f3fcf99@geanix.com> X-B4-Tracking: v=1; b=H4sIAKIqKmcC/zXMwQrCMAzG8VcZOdux1LSgJ99Ddqg123KwlbaUy di7WwdeAv/A99sgcxLOcO02SFwlSwwt9KkDv7gws5Jna9CDJsTBKB9D5VRU8S4oehi0pIn9ZKF N3oknWQ/uPrZeJJeYPode8ff9Q4TanEn3aC/YDIUqswu3uR1Zex9fMO77/gXTirQdnwAAAA== X-Change-ID: 20241105-convert-tcan-4b516424ecf6 To: Marc Kleine-Budde , Vincent Mailhol , "David S. Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni , Rob Herring , Krzysztof Kozlowski , Conor Dooley Cc: linux-can@vger.kernel.org, netdev@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Sean Nyekjaer X-Mailer: b4 0.14.2 X-Authenticated-Sender: sean@geanix.com X-Virus-Scanned: Clear (ClamAV 0.103.10/27449/Tue Nov 5 10:36:43 2024) Convert binding doc tcan4x5x.txt to yaml. Signed-off-by: Sean Nyekjaer Reviewed-by: Krzysztof Kozlowski --- Changes since rfc: - Tried to re-add ti,tcan4x5x wildcard - Removed xceiver and vdd supplies (copy paste error) - Corrected max SPI frequency - Copy pasted bosch,mram-cfg from bosch,m_can.yaml - device-state-gpios and device-wake-gpios only available for tcan4x5x Changes in v2: - Removed unneeded "|" - Reworked properties, compatible - Removed additionalProperties: false - Added unevaluatedProperties: false - Added missing space in examples - Link to v1: https://lore.kernel.org/r/20241104125342.1691516-1-sean@geani= x.com --- .../devicetree/bindings/net/can/tcan4x5x.txt | 48 ------ .../devicetree/bindings/net/can/ti,tcan4x5x.yaml | 184 +++++++++++++++++= ++++ 2 files changed, 184 insertions(+), 48 deletions(-) diff --git a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt b/Docum= entation/devicetree/bindings/net/can/tcan4x5x.txt deleted file mode 100644 index 20c0572c9853424e1d104cbf75d02094a54836c3..000000000000000000000000000= 0000000000000 --- a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt +++ /dev/null @@ -1,48 +0,0 @@ -Texas Instruments TCAN4x5x CAN Controller -=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D - -This file provides device node information for the TCAN4x5x interface cont= ains. - -Required properties: - - compatible: - "ti,tcan4552", "ti,tcan4x5x" - "ti,tcan4553", "ti,tcan4x5x" or - "ti,tcan4x5x" - - reg: 0 - - #address-cells: 1 - - #size-cells: 0 - - spi-max-frequency: Maximum frequency of the SPI bus the chip can - operate at should be less than or equal to 18 MHz. - - interrupt-parent: the phandle to the interrupt controller which provides - the interrupt. - - interrupts: interrupt specification for data-ready. - -See Documentation/devicetree/bindings/net/can/bosch,m_can.yaml for additio= nal -required property details. - -Optional properties: - - reset-gpios: Hardwired output GPIO. If not defined then software - reset. - - device-state-gpios: Input GPIO that indicates if the device is in - a sleep state or if the device is active. Not - available with tcan4552/4553. - - device-wake-gpios: Wake up GPIO to wake up the TCAN device. Not - available with tcan4552/4553. - - wakeup-source: Leave the chip running when suspended, and configure - the RX interrupt to wake up the device. - -Example: -tcan4x5x: tcan4x5x@0 { - compatible =3D "ti,tcan4x5x"; - reg =3D <0>; - #address-cells =3D <1>; - #size-cells =3D <1>; - spi-max-frequency =3D <10000000>; - bosch,mram-cfg =3D <0x0 0 0 16 0 0 1 1>; - interrupt-parent =3D <&gpio1>; - interrupts =3D <14 IRQ_TYPE_LEVEL_LOW>; - device-state-gpios =3D <&gpio3 21 GPIO_ACTIVE_HIGH>; - device-wake-gpios =3D <&gpio1 15 GPIO_ACTIVE_HIGH>; - reset-gpios =3D <&gpio1 27 GPIO_ACTIVE_HIGH>; - wakeup-source; -}; diff --git a/Documentation/devicetree/bindings/net/can/ti,tcan4x5x.yaml b/D= ocumentation/devicetree/bindings/net/can/ti,tcan4x5x.yaml new file mode 100644 index 0000000000000000000000000000000000000000..f1d18a5461e05296998ae9bf09b= dfa1226580131 --- /dev/null +++ b/Documentation/devicetree/bindings/net/can/ti,tcan4x5x.yaml @@ -0,0 +1,184 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/can/ti,tcan4x5x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TCAN4x5x CAN Controller + +maintainers: + - Marc Kleine-Budde + +properties: + compatible: + oneOf: + - items: + - enum: + - ti,tcan4552 + - ti,tcan4553 + - const: ti,tcan4x5x + - const: ti,tcan4x5x + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + description: The GPIO parent interrupt. + + clocks: + maxItems: 1 + + reset-gpios: + description: Hardwired output GPIO. If not defined then software reset. + maxItems: 1 + + device-state-gpios: + description: + Input GPIO that indicates if the device is in a sleep state or if the + device is active. Not available with tcan4552/4553. + maxItems: 1 + + device-wake-gpios: + description: + Wake up GPIO to wake up the TCAN device. + Not available with tcan4552/4553. + maxItems: 1 + + bosch,mram-cfg: + description: | + Message RAM configuration data. + Multiple M_CAN instances can share the same Message RAM + and each element(e.g Rx FIFO or Tx Buffer and etc) number + in Message RAM is also configurable, so this property is + telling driver how the shared or private Message RAM are + used by this M_CAN controller. + + The format should be as follows: + + The 'offset' is an address offset of the Message RAM where + the following elements start from. This is usually set to + 0x0 if you're using a private Message RAM. The remain cells + are used to specify how many elements are used for each FIFO/Buffer. + + M_CAN includes the following elements according to user manual: + 11-bit Filter 0-128 elements / 0-128 words + 29-bit Filter 0-64 elements / 0-128 words + Rx FIFO 0 0-64 elements / 0-1152 words + Rx FIFO 1 0-64 elements / 0-1152 words + Rx Buffers 0-64 elements / 0-1152 words + Tx Event FIFO 0-32 elements / 0-64 words + Tx Buffers 0-32 elements / 0-576 words + + Please refer to 2.4.1 Message RAM Configuration in Bosch + M_CAN user manual for details. + $ref: /schemas/types.yaml#/definitions/int32-array + items: + - description: The 'offset' is an address offset of the Message RAM = where + the following elements start from. This is usually set to 0x0 if + you're using a private Message RAM. + default: 0 + - description: 11-bit Filter 0-128 elements / 0-128 words + minimum: 0 + maximum: 128 + - description: 29-bit Filter 0-64 elements / 0-128 words + minimum: 0 + maximum: 64 + - description: Rx FIFO 0 0-64 elements / 0-1152 words + minimum: 0 + maximum: 64 + - description: Rx FIFO 1 0-64 elements / 0-1152 words + minimum: 0 + maximum: 64 + - description: Rx Buffers 0-64 elements / 0-1152 words + minimum: 0 + maximum: 64 + - description: Tx Event FIFO 0-32 elements / 0-64 words + minimum: 0 + maximum: 32 + - description: Tx Buffers 0-32 elements / 0-576 words + minimum: 0 + maximum: 32 + minItems: 1 + + spi-max-frequency: + description: + Must be half or less of "clocks" frequency. + maximum: 18000000 + + wakeup-source: + $ref: /schemas/types.yaml#/definitions/flag + description: + Enable CAN remote wakeup. + +allOf: + - $ref: can-controller.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + - if: + properties: + compatible: + contains: + enum: + - ti,tcan4552 + - ti,tcan4553 + then: + properties: + device-state-gpios: false + device-wake-gpios: false + +required: + - compatible + - reg + - interrupts + - clocks + - bosch,mram-cfg + +unevaluatedProperties: false + +examples: + - | + #include + #include + + spi { + #address-cells =3D <1>; + #size-cells =3D <0>; + + can@0 { + compatible =3D "ti,tcan4x5x"; + reg =3D <0>; + clocks =3D <&can0_osc>; + pinctrl-names =3D "default"; + pinctrl-0 =3D <&can0_pins>; + spi-max-frequency =3D <10000000>; + bosch,mram-cfg =3D <0x0 0 0 16 0 0 1 1>; + interrupt-parent =3D <&gpio1>; + interrupts =3D <14 IRQ_TYPE_LEVEL_LOW>; + device-state-gpios =3D <&gpio3 21 GPIO_ACTIVE_HIGH>; + device-wake-gpios =3D <&gpio1 15 GPIO_ACTIVE_HIGH>; + reset-gpios =3D <&gpio1 27 GPIO_ACTIVE_HIGH>; + wakeup-source; + }; + }; + - | + #include + #include + + spi { + #address-cells =3D <1>; + #size-cells =3D <0>; + + can@0 { + compatible =3D "ti,tcan4552", "ti,tcan4x5x"; + reg =3D <0>; + clocks =3D <&can0_osc>; + pinctrl-names =3D "default"; + pinctrl-0 =3D <&can0_pins>; + spi-max-frequency =3D <10000000>; + bosch,mram-cfg =3D <0x0 0 0 16 0 0 1 1>; + interrupt-parent =3D <&gpio1>; + interrupts =3D <14 IRQ_TYPE_LEVEL_LOW>; + reset-gpios =3D <&gpio1 27 GPIO_ACTIVE_HIGH>; + wakeup-source; + }; + }; --- base-commit: 2b2a9a08f8f0b904ea2bc61db3374421b0f944a6 change-id: 20241105-convert-tcan-4b516424ecf6 Best regards, --=20 Sean Nyekjaer