From nobody Sun Nov 24 17:06:22 2024 Received: from mail.andi.de1.cc (mail.andi.de1.cc [178.238.236.174]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 46A3B42A9E; Mon, 4 Nov 2024 13:56:18 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=178.238.236.174 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1730728580; cv=none; b=i0I2qiqkOaCUU1FrYMjMTQ7Gt1vLygwQkCemuG5Sgz7Acp0KY8dE16N2TtK5KLeansz1aTGPQcAJBsruQPosCpUxLj0JKlR6g3OznIRexGZAm1X1j0nnHcFH7CNd+isEz8yEDiT8YULzwvQ1lGGn3xN6FkDv8UkHadagYnb9AT0= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1730728580; c=relaxed/simple; bh=LFnGHyIFnPZpnC4W0TkiCtiiQ6Tj7q5qpaFCImtsPX0=; h=From:To:Subject:Date:Message-Id:MIME-Version; b=A75lrw3aWl5xTI8wh8d8kTFm6GI7IV9khMO5t2FGyFG8p9uWl1tHvU7C+v3Sxsk64zQDUL6ZlAHG3KPb1GreSS3LMb2R2vc116oMM3t9fGWSRvAN/nlW/7bKK9YOVN1lvBsnO1i3mnTPic3gTS4MYr+gAKeFSIHdK4WRh2YiDsM= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=kemnade.info; spf=pass smtp.mailfrom=kemnade.info; dkim=pass (2048-bit key) header.d=kemnade.info header.i=@kemnade.info header.b=cf8P6HaJ; arc=none smtp.client-ip=178.238.236.174 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=kemnade.info Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=kemnade.info Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kemnade.info header.i=@kemnade.info header.b="cf8P6HaJ" DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=kemnade.info; s=20220719; h=From:Sender:Reply-To:Cc:Content-ID: Content-Description:Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc :Resent-Message-ID:In-Reply-To:References; bh=AHIiq5Bgi/FTE/bmYNE1/BMipbYGBmIox57V0t9XEzE=; b=cf8P6HaJpBSwdOjWDt9jLXknGU xbRVUw9y1lcilcRVpw7gpWcW9xvDjGY4tRMqYV5a5Dqj473gE8+fKb8momeqLs1eEjWTHIGdAGzRj FemwuVr6LK5NHy2UY6O/4OKU1cvNM9dag3tCPDPgEfIlHD4slWLnYkQnbg8dO2Fk8ZSut39hphmIy qC3uTAz5kwhGntFSLpeQh8oiv7owjKi2+Ilm1ZxwwvL39CgkKnD3Urd0jEfIyn5nwEB4lTQrKBOLK cPYztuudPUD4if8ElH6d8ktDCoQR6XIQTJmPEQpzutQLLka4vN+FCJyaqi4I4YprF5iSIFbib4f7A wNDjtSKA==; From: Andreas Kemnade To: Michael Turquette , Krzysztof Kozlowski , Rob Herring , linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org, linux-omap@vger.kernel.org, Tero Kristo , Tony Lindgren , Andreas Kemnade , Conor Dooley , Stephen Boyd , devicetree@vger.kernel.org Subject: [PATCH] dt-bindings: clock: ti: Convert mux.txt to json-schema Date: Mon, 4 Nov 2024 14:55:49 +0100 Message-Id: <20241104135549.38486-1-andreas@kemnade.info> X-Mailer: git-send-email 2.39.5 Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset="utf-8" Convert the OMAP mux clock device tree binding to json-schema. Specify the creator of the original binding as a maintainer. Choose GPL-only license because original binding was also GPL. Signed-off-by: Andreas Kemnade --- .../bindings/clock/ti/composite.txt | 2 +- .../devicetree/bindings/clock/ti/mux.txt | 78 ----------- .../bindings/clock/ti/ti,mux-clock.yaml | 123 ++++++++++++++++++ 3 files changed, 124 insertions(+), 79 deletions(-) delete mode 100644 Documentation/devicetree/bindings/clock/ti/mux.txt create mode 100644 Documentation/devicetree/bindings/clock/ti/ti,mux-clock= .yaml diff --git a/Documentation/devicetree/bindings/clock/ti/composite.txt b/Doc= umentation/devicetree/bindings/clock/ti/composite.txt index b02f22490dcb..238e6f7d74f8 100644 --- a/Documentation/devicetree/bindings/clock/ti/composite.txt +++ b/Documentation/devicetree/bindings/clock/ti/composite.txt @@ -16,7 +16,7 @@ merged to this clock. The component clocks shall be of on= e of the "ti,*composite*-clock" types. =20 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt -[2] Documentation/devicetree/bindings/clock/ti/mux.txt +[2] Documentation/devicetree/bindings/clock/ti/ti,mux-clock.yaml [3] Documentation/devicetree/bindings/clock/ti/ti,divider-clock.yaml [4] Documentation/devicetree/bindings/clock/ti/gate.txt =20 diff --git a/Documentation/devicetree/bindings/clock/ti/mux.txt b/Documenta= tion/devicetree/bindings/clock/ti/mux.txt deleted file mode 100644 index cd56d3c1c09f..000000000000 --- a/Documentation/devicetree/bindings/clock/ti/mux.txt +++ /dev/null @@ -1,78 +0,0 @@ -Binding for TI mux clock. - -This binding uses the common clock binding[1]. It assumes a -register-mapped multiplexer with multiple input clock signals or -parents, one of which can be selected as output. This clock does not -gate or adjust the parent rate via a divider or multiplier. - -By default the "clocks" property lists the parents in the same order -as they are programmed into the register. E.g: - - clocks =3D <&foo_clock>, <&bar_clock>, <&baz_clock>; - -results in programming the register as follows: - -register value selected parent clock -0 foo_clock -1 bar_clock -2 baz_clock - -Some clock controller IPs do not allow a value of zero to be programmed -into the register, instead indexing begins at 1. The optional property -"index-starts-at-one" modified the scheme as follows: - -register value selected clock parent -1 foo_clock -2 bar_clock -3 baz_clock - -The binding must provide the register to control the mux. Optionally -the number of bits to shift the control field in the register can be -supplied. If the shift value is missing it is the same as supplying -a zero shift. - -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt - -Required properties: -- compatible : shall be "ti,mux-clock" or "ti,composite-mux-clock". -- #clock-cells : from common clock binding; shall be set to 0. -- clocks : link phandles of parent clocks -- reg : register offset for register controlling adjustable mux - -Optional properties: -- clock-output-names : from common clock binding. -- ti,bit-shift : number of bits to shift the bit-mask, defaults to - 0 if not present -- ti,index-starts-at-one : valid input select programming starts at 1, not - zero -- ti,set-rate-parent : clk_set_rate is propagated to parent clock, - not supported by the composite-mux-clock subtype -- ti,latch-bit : latch the mux value to HW, only needed if the register - access requires this. As an example, dra7x DPLL_GMAC H14 muxing - implements such behavior. - -Examples: - -sys_clkin_ck: sys_clkin_ck@4a306110 { - #clock-cells =3D <0>; - compatible =3D "ti,mux-clock"; - clocks =3D <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>,= <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_3840= 0000_ck>; - reg =3D <0x0110>; - ti,index-starts-at-one; -}; - -abe_dpll_bypass_clk_mux_ck: abe_dpll_bypass_clk_mux_ck@4a306108 { - #clock-cells =3D <0>; - compatible =3D "ti,mux-clock"; - clocks =3D <&sys_clkin_ck>, <&sys_32k_ck>; - ti,bit-shift =3D <24>; - reg =3D <0x0108>; -}; - -mcbsp5_mux_fck: mcbsp5_mux_fck { - #clock-cells =3D <0>; - compatible =3D "ti,composite-mux-clock"; - clocks =3D <&core_96m_fck>, <&mcbsp_clks>; - ti,bit-shift =3D <4>; - reg =3D <0x02d8>; -}; diff --git a/Documentation/devicetree/bindings/clock/ti/ti,mux-clock.yaml b= /Documentation/devicetree/bindings/clock/ti/ti,mux-clock.yaml new file mode 100644 index 000000000000..b271ab86dde1 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti/ti,mux-clock.yaml @@ -0,0 +1,123 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/ti/ti,mux-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments mux clock + +maintainers: + - Tero Kristo + +description: | + This clock assumes a register-mapped multiplexer with multiple inpt clock + signals or parents, one of which can be selected as output. This clock d= oes + not gate or adjust the parent rate via a divider or multiplier. + + By default the "clocks" property lists the parents in the same order + as they are programmed into the register. E.g: + + clocks =3D <&foo_clock>, <&bar_clock>, <&baz_clock>; + + results in programming the register as follows: + + register value selected parent clock + 0 foo_clock + 1 bar_clock + 2 baz_clock + + Some clock controller IPs do not allow a value of zero to be programmed + into the register, instead indexing begins at 1. The optional property + "index-starts-at-one" modified the scheme as follows: + + register value selected clock parent + 1 foo_clock + 2 bar_clock + 3 baz_clock + + The binding must provide the register to control the mux. Optionally + the number of bits to shift the control field in the register can be + supplied. If the shift value is missing it is the same as supplying + a zero shift. + +properties: + compatible: + enum: + - ti,mux-clock + - ti,composite-mux-clock + + "#clock-cells": + const: 0 + + clocks: true + + clock-output-names: + maxItems: 1 + + reg: + maxItems: 1 + + ti,bit-shift: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + number of bits to shift the bit-mask, defaults to 0 if not present + maximum: 31 + default: 0 + + ti,index-starts-at-one: + type: boolean + description: + valid input select programming starts at 1, not zero + + ti,set-rate-parent: + type: boolean + description: + clk_set_rate is propagated to parent clock, + not supported by the composite-mux-clock subtype. + ti,latch-bit: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + latch the mux value to HW, only needed if the register + access requires this. As an example, dra7x DPLL_GMAC H14 muxing + implements such behavior. + +if: + properties: + compatible: + contains: + const: ti,composite-mux-clock +then: + properties: + ti,set-rate-parent: false + +required: + - compatible + - "#clock-cells" + - clocks + - reg + +additionalProperties: false + +examples: + - | + bus { + #address-cells =3D <1>; + #size-cells =3D <0>; + + clock-controller@110 { + #clock-cells =3D <0>; + compatible =3D "ti,mux-clock"; + clocks =3D <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_168000= 00_ck>; + reg =3D <0x0110>; + ti,index-starts-at-one; + ti,set-rate-parent; + }; + + clock-controller@120 { + #clock-cells =3D <0>; + compatible =3D "ti,composite-mux-clock"; + clocks =3D <&core_96m_fck>, <&mcbsp_clks>; + ti,bit-shift =3D <4>; + reg =3D <0x02d8>; + }; + }; --=20 2.39.5