From nobody Mon Nov 25 06:55:09 2024 Received: from mail-oa1-f42.google.com (mail-oa1-f42.google.com [209.85.160.42]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 656DE8F7D; Wed, 30 Oct 2024 00:12:40 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.160.42 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1730247163; cv=none; b=fPoQo+iFj/HFMI1Vfv+qz74VzBCsQcH+sParaI4ywXlGG/y84NdSley4awjyuT54zJ+jc7HJIv660VXpbxKQKCc3cXe4anBCzQl76f7No2DZOb07+hQ8KBBRdeb5Ia1q6WNNMeh6bl8xu1knBCwL3n+edNrbzhpNX1JIfxvDDXA= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1730247163; c=relaxed/simple; bh=oM3u2WVAQSIAum0Ph7PBMigUeUH/81+gqOATbgG1+7Q=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version:Content-Type; b=X6YSi7fjVVCAR61nOjx9P5gxag3+NdkaFlgMXX1zfxQJPzRBjrCrUhe5Uo6u9fTeaxmu5gqTCbC6QYiZ3HfuZ7wGsEoY19SjWi4pcdeWNePNm1DsIETsN5v6gkE5SARy/ySOCY0svWmnqwB/1wQEgdEzJAfplqQRuzHHrFaZmgY= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b=U8nRElhX; arc=none smtp.client-ip=209.85.160.42 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="U8nRElhX" Received: by mail-oa1-f42.google.com with SMTP id 586e51a60fabf-288a90e4190so2869176fac.0; Tue, 29 Oct 2024 17:12:40 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20230601; t=1730247159; x=1730851959; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=UusaGnSZrxtVofmA3qEh8juOM0Ft+inRjY1u3Zb3B/8=; b=U8nRElhXMy8nW3Q+u5qNxXtIqo3FX1fOP7Z2Ue0FOqMOnpBf8a9QOVWpkmFTcmgRzY YGaZS3Q87F0xUO6GLaGVsJi7omgbc8od33dPwtRVYVHRBekmNfKILdXgn9KS/d6GbPQM 0FZK0BXFM3yRD6BK3x68aN5BZhrn6Pg3gPz7BywF6wYgSHn+DJ+d2HZtfP34Nj7s4Nju hMcG38Z/k/xFi2ErWcjad4igwSPr5UCkZiva+Ro0TkzC4B10d6s1lpXX7q591UsC82SB HOUWEdqfHZIKMliyS1Kp6sMC3DaWrE9l6tlq094ZEZJYA5+PnkcfCrsXW+huyV8qP9XG MfTQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1730247159; x=1730851959; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=UusaGnSZrxtVofmA3qEh8juOM0Ft+inRjY1u3Zb3B/8=; b=DYAFKsBwnPLhHP23o846nJ22wCzdHviBZgsPLJVbw0bwtKn7UOcfc2Kj9eG34DbLP/ NWGVXhPoaPVGWNJg5O2ZrDfRGIMWbE2ASAHqODQNLNlUz8aHshMCEaMfkdGUPAuLW6Jx d1Xiz5LpePXS0ooQlDcTHGTTYUCdb3YgxAq5z4MBCWUNqiassgWt4lpRsrTwaWHHcfRZ 6ZIk6PP39eASPVMSLksULzVEEHoGsx8ACHteGUs3sLhT5VuJQB4J+o8fpmL0bml9nR+t HrEM+cuUF4+IvpwFQlvvI+r2AFa70mFRNCmLYH+qOOoprXmldrnv/4ZccVi101O1ST6U 1Cbw== X-Forwarded-Encrypted: i=1; AJvYcCU/r3qpt/NgnO3KU1PTK5EqB9/6PgwaRZczghmRnq92+GUFBZ0otf7WBg2ceReX0gY+t+ZoSokrnyHCYVDBaUyp9cQ8Ug==@vger.kernel.org, AJvYcCV1HfuHCAlP/mogK1avdkiukwPSVQKQEOGoT1PcOPGFd10lF2De274yOtSvpw5AOMIemIN3Em9qW+YMAPg=@vger.kernel.org X-Gm-Message-State: AOJu0YwYwe61rHLOY/e3bWZwLAYnEV5buDc4Tmb+wcwr1PCRHlZDhrJa Wmfosq1aYLr1eQUyyqwgZYC4asCJ8TDgNBIGg2H1lfyKlMHsssAGKghXNA== X-Google-Smtp-Source: AGHT+IFsFgP4z65kZW904ljvoPw93JO7CVEzBvT1Bi51mqCgNFXMCEanWaNSxDpYYmSK8gnIxiIGSQ== X-Received: by 2002:a05:6870:b50e:b0:25e:24a0:4c96 with SMTP id 586e51a60fabf-29051b73021mr12481633fac.11.1730247159422; Tue, 29 Oct 2024 17:12:39 -0700 (PDT) Received: from localhost.localdomain (host95.181-12-202.telecom.net.ar. [181.12.202.95]) by smtp.gmail.com with ESMTPSA id 41be03b00d2f7-7edc8661070sm8164217a12.3.2024.10.29.17.12.37 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 29 Oct 2024 17:12:39 -0700 (PDT) From: Kurt Borja To: kuurtb@gmail.com Cc: W_Armin@gmx.de, hdegoede@redhat.com, ilpo.jarvinen@linux.intel.com, linux-kernel@vger.kernel.org, platform-driver-x86@vger.kernel.org Subject: [PATCH v11 5/5] alienware-wmi: WMAX interface documentation Date: Tue, 29 Oct 2024 21:12:27 -0300 Message-ID: <20241030001228.7770-1-kuurtb@gmail.com> X-Mailer: git-send-email 2.47.0 In-Reply-To: <20241030000904.7205-2-kuurtb@gmail.com> References: <20241030000904.7205-2-kuurtb@gmail.com> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable Added documentation for new WMAX interface, present on some Alienware X-Series, Alienware M-Series and Dell's G-Series laptops. Signed-off-by: Kurt Borja Reviewed-by: Armin Wolf Reviewed-by: Ilpo J=C3=A4rvinen --- v11: - Unchanged v10: - Unchanged v9: - Unchanged v8: - Unchanged v7: - Added GameShiftStatus method to documentation - Added remark about operation 0x03 of Thermal_Information method - Removed undocumented methods v6: - Fixed typos - Included new file in MAINTAINERS --- Documentation/wmi/devices/alienware-wmi.rst | 388 ++++++++++++++++++++ MAINTAINERS | 1 + 2 files changed, 389 insertions(+) create mode 100644 Documentation/wmi/devices/alienware-wmi.rst diff --git a/Documentation/wmi/devices/alienware-wmi.rst b/Documentation/wm= i/devices/alienware-wmi.rst new file mode 100644 index 000000000..36a67ff9a --- /dev/null +++ b/Documentation/wmi/devices/alienware-wmi.rst @@ -0,0 +1,388 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D +Dell AWCC WMI interface driver (alienware-wmi) +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D + +Introduction +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D + +The WMI device WMAX has been implemented for many Alienware and Dell's G-S= eries +models. Throughout these models, two implementations have been identified.= The +first one, used by older systems, deals with HDMI, brightness, RGB, amplif= ier +and deep sleep control. The second one used by newer systems deals primari= ly +with thermal, overclocking, and GPIO control. + +It is suspected that the latter is used by Alienware Command Center (AWCC)= to +manage manufacturer predefined thermal profiles. The alienware-wmi driver +exposes Thermal_Information and Thermal_Control methods through the Platfo= rm +Profile API to mimic AWCC's behavior. + +This newer interface, named AWCCMethodFunction has been reverse engineered= , as +Dell has not provided any official documentation. We will try to describe = to the +best of our ability its discovered inner workings. + +.. note:: + The following method description may be incomplete and some operations = have + different implementations between devices. + +WMI interface description +------------------------- + +The WMI interface description can be decoded from the embedded binary MOF = (bmof) +data using the `bmfdec `_ utility: + +:: + + [WMI, Dynamic, Provider("WmiProv"), Locale("MS\\0x409"), Description("WMI= Function"), guid("{A70591CE-A997-11DA-B012-B622A1EF5492}")] + class AWCCWmiMethodFunction { + [key, read] string InstanceName; + [read] boolean Active; + + [WmiMethodId(13), Implemented, read, write, Description("Return Overclo= cking Report.")] void Return_OverclockingReport([out] uint32 argr); + [WmiMethodId(14), Implemented, read, write, Description("Set OCUIBIOS C= ontrol.")] void Set_OCUIBIOSControl([in] uint32 arg2, [out] uint32 argr); + [WmiMethodId(15), Implemented, read, write, Description("Clear OC FailS= afe Flag.")] void Clear_OCFailSafeFlag([out] uint32 argr); + [WmiMethodId(19), Implemented, read, write, Description("Get Fan Sensor= s.")] void GetFanSensors([in] uint32 arg2, [out] uint32 argr); + [WmiMethodId(20), Implemented, read, write, Description("Thermal Inform= ation.")] void Thermal_Information([in] uint32 arg2, [out] uint32 argr); + [WmiMethodId(21), Implemented, read, write, Description("Thermal Contro= l.")] void Thermal_Control([in] uint32 arg2, [out] uint32 argr); + [WmiMethodId(23), Implemented, read, write, Description("MemoryOCContro= l.")] void MemoryOCControl([in] uint32 arg2, [out] uint32 argr); + [WmiMethodId(26), Implemented, read, write, Description("System Informa= tion.")] void SystemInformation([in] uint32 arg2, [out] uint32 argr); + [WmiMethodId(28), Implemented, read, write, Description("Power Informat= ion.")] void PowerInformation([in] uint32 arg2, [out] uint32 argr); + [WmiMethodId(32), Implemented, read, write, Description("FW Update GPIO= toggle.")] void FWUpdateGPIOtoggle([in] uint32 arg2, [out] uint32 argr); + [WmiMethodId(33), Implemented, read, write, Description("Read Total of = GPIOs.")] void ReadTotalofGPIOs([out] uint32 argr); + [WmiMethodId(34), Implemented, read, write, Description("Read GPIO pin = Status.")] void ReadGPIOpPinStatus([in] uint32 arg2, [out] uint32 argr); + [WmiMethodId(35), Implemented, read, write, Description("Read Chassis C= olor.")] void ReadChassisColor([out] uint32 argr); + [WmiMethodId(36), Implemented, read, write, Description("Read Platform = Properties.")] void ReadPlatformProperties([out] uint32 argr); + [WmiMethodId(37), Implemented, read, write, Description("Game Shift Sta= tus.")] void GameShiftStatus([in] uint32 arg2, [out] uint32 argr); + [WmiMethodId(128), Implemented, read, write, Description("Caldera SW in= stallation.")] void CalderaSWInstallation([out] uint32 argr); + [WmiMethodId(129), Implemented, read, write, Description("Caldera SW is= released.")] void CalderaSWReleased([out] uint32 argr); + [WmiMethodId(130), Implemented, read, write, Description("Caldera Conne= ction Status.")] void CalderaConnectionStatus([in] uint32 arg2, [out] uint3= 2 argr); + [WmiMethodId(131), Implemented, read, write, Description("Surprise Unpl= ugged Flag Status.")] void SurpriseUnpluggedFlagStatus([out] uint32 argr); + [WmiMethodId(132), Implemented, read, write, Description("Clear Surpris= e Unplugged Flag.")] void ClearSurpriseUnpluggedFlag([out] uint32 argr); + [WmiMethodId(133), Implemented, read, write, Description("Cancel Undock= Request.")] void CancelUndockRequest([out] uint32 argr); + [WmiMethodId(135), Implemented, read, write, Description("Devices in Ca= ldera.")] void DevicesInCaldera([in] uint32 arg2, [out] uint32 argr); + [WmiMethodId(136), Implemented, read, write, Description("Notify BIOS f= or SW ready to disconnect Caldera.")] void NotifyBIOSForSWReadyToDisconnect= Caldera([out] uint32 argr); + [WmiMethodId(160), Implemented, read, write, Description("Tobii SW inst= allation.")] void TobiiSWinstallation([out] uint32 argr); + [WmiMethodId(161), Implemented, read, write, Description("Tobii SW Rele= ased.")] void TobiiSWReleased([out] uint32 argr); + [WmiMethodId(162), Implemented, read, write, Description("Tobii Camera = Power Reset.")] void TobiiCameraPowerReset([out] uint32 argr); + [WmiMethodId(163), Implemented, read, write, Description("Tobii Camera = Power On.")] void TobiiCameraPowerOn([out] uint32 argr); + [WmiMethodId(164), Implemented, read, write, Description("Tobii Camera = Power Off.")] void TobiiCameraPowerOff([out] uint32 argr); + }; + +Some of these methods get quite intricate so we will describe them using +pseudo-code that vaguely resembles the original ASL code. + +Methods not described in the following document have unknown behavior. + +Argument Structure +------------------ + +All input arguments have type **uint32** and their structure is very simil= ar +between methods. Usually, the first byte corresponds to a specific *operat= ion* +the method performs, and the subsequent bytes correspond to *arguments* pa= ssed +to this *operation*. For example, if an operation has code 0x01 and requir= es an +ID 0xA0, the argument you would pass to the method is 0xA001. + + +Thermal Methods +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D + +WMI method Thermal_Information([in] uint32 arg2, [out] uint32 argr) +------------------------------------------------------------------- + +:: + + if BYTE_0(arg2) =3D=3D 0x01: + argr =3D 1 + + if BYTE_0(arg2) =3D=3D 0x02: + argr =3D UNKNOWN_CONSTANT + + if BYTE_0(arg2) =3D=3D 0x03: + if BYTE_1(arg2) =3D=3D 0x00: + argr =3D FAN_ID_0 + + if BYTE_1(arg2) =3D=3D 0x01: + argr =3D FAN_ID_1 + + if BYTE_1(arg2) =3D=3D 0x02: + argr =3D FAN_ID_2 + + if BYTE_1(arg2) =3D=3D 0x03: + argr =3D FAN_ID_3 + + if BYTE_1(arg2) =3D=3D 0x04: + argr =3D SENSOR_ID_CPU | 0x0100 + + if BYTE_1(arg2) =3D=3D 0x05: + argr =3D SENSOR_ID_GPU | 0x0100 + + if BYTE_1(arg2) =3D=3D 0x06: + argr =3D THERMAL_MODE_QUIET_ID + + if BYTE_1(arg2) =3D=3D 0x07: + argr =3D THERMAL_MODE_BALANCED_ID + + if BYTE_1(arg2) =3D=3D 0x08: + argr =3D THERMAL_MODE_BALANCED_PERFORMANCE_ID + + if BYTE_1(arg2) =3D=3D 0x09: + argr =3D THERMAL_MODE_PERFORMANCE_ID + + if BYTE_1(arg2) =3D=3D 0x0A: + argr =3D THERMAL_MODE_LOW_POWER_ID + + if BYTE_1(arg2) =3D=3D 0x0B: + argr =3D THERMAL_MODE_GMODE_ID + + else: + argr =3D 0xFFFFFFFF + + if BYTE_0(arg2) =3D=3D 0x04: + if is_valid_sensor(BYTE_1(arg2)): + argr =3D SENSOR_TEMP_C + else: + argr =3D 0xFFFFFFFF + + if BYTE_0(arg2) =3D=3D 0x05: + if is_valid_fan(BYTE_1(arg2)): + argr =3D FAN_RPM() + + if BYTE_0(arg2) =3D=3D 0x06: + skip + + if BYTE_0(arg2) =3D=3D 0x07: + argr =3D 0 + + If BYTE_0(arg2) =3D=3D 0x08: + if is_valid_fan(BYTE_1(arg2)): + argr =3D 0 + else: + argr =3D 0xFFFFFFFF + + if BYTE_0(arg2) =3D=3D 0x09: + if is_valid_fan(BYTE_1(arg2)): + argr =3D FAN_UNKNOWN_STAT_0() + + else: + argr =3D 0xFFFFFFFF + + if BYTE_0(arg2) =3D=3D 0x0A: + argr =3D THERMAL_MODE_BALANCED_ID + + if BYTE_0(arg2) =3D=3D 0x0B: + argr =3D CURRENT_THERMAL_MODE() + + if BYTE_0(arg2) =3D=3D 0x0C: + if is_valid_fan(BYTE_1(arg2)): + argr =3D FAN_UNKNOWN_STAT_1() + else: + argr =3D 0xFFFFFFFF + +Operation 0x03 list all available fan IDs, sensor IDs and thermal profile +codes in order, but different models may have different number of fans and +thermal profiles. These are the known ranges: + +* Fan IDs: from 2 up to 4 +* Sensor IDs: 2 +* Thermal profile codes: from 1 up to 7 + +In total BYTE_1(ARG2) may range from 0x5 up to 0xD depending on the model. + +WMI method Thermal_Control([in] uint32 arg2, [out] uint32 argr) +--------------------------------------------------------------- + +:: + + if BYTE_0(arg2) =3D=3D 0x01: + if is_valid_thermal_profile(BYTE_1(arg2)): + SET_THERMAL_PROFILE(BYTE_1(arg2)) + argr =3D 0 + + if BYTE_0(arg2) =3D=3D 0x02: + if is_valid_fan(BYTE_1(arg2)): + SET_FAN_SPEED_MULTIPLIER(BYTE_2(arg2)) + argr =3D 0 + else: + argr =3D 0xFFFFFFFF + +.. note:: + While you can manually change the fan speed multiplier with this method, + Dell's BIOS tends to overwrite this changes anyway. + +These are the known thermal profile codes: + +:: + + CUSTOM 0x00 + + BALANCED_USTT 0xA0 + BALANCED_PERFORMANCE_USTT 0xA1 + COOL_USTT 0xA2 + QUIET_USTT 0xA3 + PERFORMANCE_USTT 0xA4 + LOW_POWER_USTT 0xA5 + + QUIET 0x96 + BALANCED 0x97 + BALANCED_PERFORMANCE 0x98 + PERFORMANCE 0x99 + + GMODE 0xAB + +Usually if a model doesn't support the first four profiles they will suppo= rt +the User Selectable Thermal Tables (USTT) profiles and vice-versa. + +GMODE replaces PERFORMANCE in G-Series laptops. + +WMI method GameShiftStatus([in] uint32 arg2, [out] uint32 argr) +--------------------------------------------------------------- + +:: + + if BYTE_0(arg2) =3D=3D 0x1: + TOGGLE_GAME_SHIFT() + argr =3D GET_GAME_SHIFT_STATUS() + + if BYTE_0(arg2) =3D=3D 0x2: + argr =3D GET_GAME_SHIFT_STATUS() + +Game Shift Status does not change the fan speed profile but it could be so= me +sort of CPU/GPU power profile. Benchmarks have not been done. + +This method is only present on Dell's G-Series laptops and it's implementa= tion +implies GMODE thermal profile is available, even if operation 0x03 of +Thermal_Information does not list it. + +G-key on Dell's G-Series laptops also changes Game Shift status, so both a= re +directly related. + +WMI method GetFanSensors([in] uint32 arg2, [out] uint32 argr) +------------------------------------------------------------- + +:: + + if BYTE_0(arg2) =3D=3D 0x1: + if is_valid_fan(BYTE_1(arg2)): + argr =3D 1 + else: + argr =3D 0 + + if BYTE_0(arg2) =3D=3D 0x2: + if is_valid_fan(BYTE_1(arg2)): + if BYTE_2(arg2) =3D=3D 0: + argr =3D=3D SENSOR_ID + else + argr =3D=3D 0xFFFFFFFF + else: + argr =3D 0 + +Overclocking Methods +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D + +.. warning:: + These methods have not been tested and are only partially reverse + engineered. + +WMI method Return_OverclockingReport([out] uint32 argr) +------------------------------------------------------- + +:: + + CSMI (0xE3, 0x99) + argr =3D 0 + +CSMI is an unknown operation. + +WMI method Set_OCUIBIOSControl([in] uint32 arg2, [out] uint32 argr) +------------------------------------------------------------------- + +:: + + CSMI (0xE3, 0x99) + argr =3D 0 + +CSMI is an unknown operation. + +WMI method Clear_OCFailSafeFlag([out] uint32 argr) +-------------------------------------------------- + +:: + + CSMI (0xE3, 0x99) + argr =3D 0 + +CSMI is an unknown operation. + + +WMI method MemoryOCControl([in] uint32 arg2, [out] uint32 argr) +--------------------------------------------------------------- + +AWCC supports memory overclocking, but this method is very intricate and h= as +not been deciphered yet. + +GPIO methods +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D + +These methods are probably related to some kind of firmware update system, +through a GPIO device. + +.. warning:: + These methods have not been tested and are only partially reverse + engineered. + +WMI method FWUpdateGPIOtoggle([in] uint32 arg2, [out] uint32 argr) +------------------------------------------------------------------ + +:: + + if BYTE_0(arg2) =3D=3D 0: + if BYTE_1(arg2) =3D=3D 1: + SET_PIN_A_HIGH() + else: + SET_PIN_A_LOW() + + if BYTE_0(arg2) =3D=3D 1: + if BYTE_1(arg2) =3D=3D 1: + SET_PIN_B_HIGH() + + else: + SET_PIN_B_LOW() + + else: + argr =3D 1 + +WMI method ReadTotalofGPIOs([out] uint32 argr) +---------------------------------------------- + +:: + + argr =3D 0x02 + +WMI method ReadGPIOpPinStatus([in] uint32 arg2, [out] uint32 argr) +------------------------------------------------------------------ + +:: + + if BYTE_0(arg2) =3D=3D 0: + argr =3D PIN_A_STATUS + + if BYTE_0(arg2) =3D=3D 1: + argr =3D PIN_B_STATUS + +Other information Methods +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D + +WMI method ReadChassisColor([out] uint32 argr) +---------------------------------------------- + +:: + + argr =3D CHASSIS_COLOR_ID + +Acknowledgements +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D + +Kudos to `AlexIII `_ for documenting +and testing available thermal profile codes. + diff --git a/MAINTAINERS b/MAINTAINERS index c27f31907..25f6de4c2 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -792,6 +792,7 @@ F: drivers/perf/alibaba_uncore_drw_pmu.c ALIENWARE WMI DRIVER L: Dell.Client.Kernel@dell.com S: Maintained +F: Documentation/wmi/devices/alienware-wmi.rst F: drivers/platform/x86/dell/alienware-wmi.c =20 ALLEGRO DVT VIDEO IP CORE DRIVER --=20 2.47.0