From nobody Wed Nov 27 00:32:10 2024 Received: from mail-wm1-f53.google.com (mail-wm1-f53.google.com [209.85.128.53]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 797FF1B2181 for ; Tue, 15 Oct 2024 13:56:37 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.128.53 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1729000601; cv=none; b=NHEgYCq2VN9Yjf2rrOvrL98CsjWCV5JG01YFlYjAfUwno5WtpI2MXvdADUZoUUZwVWI9J6feMKVYbz/LrEZViTU0px9nhvcWhvgzQh1IIaAGdENV0jihvQo+lC6BEpBdxcwt8iVn+80iXlQLSE/GD/hIX/OYZU3s+UdhkI0GlW0= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1729000601; c=relaxed/simple; bh=gYRorQljls7gnt12GddZsLRjR3XCK4N21cRs97XBdSo=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=f2LUJyU/F/RrQPnzEQ0h/ITFQL9j/rewhXgOEmpKDASxA6TUbzn8dhxXhPakMUZRNnf8FK0p2aUiflIBIzZU6E6gz5UrQiYbV/9cCeMbH4oKQoIJ3hLhhtEFKt/24VvvdyPOzxaZEh0nPKRdbfOlToB9hQDvht49Q/Y8BA1qc74= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=baylibre.com; spf=pass smtp.mailfrom=baylibre.com; dkim=pass (2048-bit key) header.d=baylibre-com.20230601.gappssmtp.com header.i=@baylibre-com.20230601.gappssmtp.com header.b=Irb1BO8+; arc=none smtp.client-ip=209.85.128.53 Authentication-Results: smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=baylibre.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=baylibre.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=baylibre-com.20230601.gappssmtp.com header.i=@baylibre-com.20230601.gappssmtp.com header.b="Irb1BO8+" Received: by mail-wm1-f53.google.com with SMTP id 5b1f17b1804b1-43144f656f0so4589325e9.0 for ; Tue, 15 Oct 2024 06:56:37 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=baylibre-com.20230601.gappssmtp.com; s=20230601; t=1729000596; x=1729605396; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=sk/w3JDfBS2L8TPVXoFuYtPWj8vcuMKf6135lmNzEF8=; b=Irb1BO8+TczeyOpA1Ch0D2JSZ+s3zG4r7icI+W2fzn8boS+AgW/GHGje9L4VmRqgMw rISH67CzXFcuj5C4bljgTdsxLeiKDr9YiOuR07rZoqB7iNBHJNxZzv6giHNEkBGcNSEn b+8MxgvQkhycbYDCMfYpVc9rO1ZSt8f3dTXQVuOB8CiqtiVsF1ise3ulw8ipNKgq0AtY dXl8VuxwEqTZK1xTVxYUM3FzDCHMFiLvEy/mVVN+qRAgPMBMN0LCvIrRquo4mPb5nsxo svAUoS2EhpMjEjewVngQl7G1vLPONirxCVPBbdrH1wyWYRSmWpbSJtxuCxWWKbdVgI+X lL9Q== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1729000596; x=1729605396; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=sk/w3JDfBS2L8TPVXoFuYtPWj8vcuMKf6135lmNzEF8=; b=liz6Grs01QBjM95NW8QE1K1aheJ1uh7pk6256phV0jruCw5MB+UtaigJD07bUwj9Aj V8HeB5/LmQ1KqDeWXCymReSxgkq1jGTDeVagTJD8zOklsNorITa7aVPRW6F/fWUxwxa/ pVetoDAlNbXihky4ckH9Bm3VOwG26ttYGM/GTUj8mDZg5C0iy093OiFNXZ8PzhnhsKPs R9U/Knhw4sGYGyNww7eLb4sNZsjo+ruqIDFy/WO/560F8WamF2yRh4xbEUDqtK7oNtCV Y7qf1CzAz94jCOMMU1kFz91hNG4HYFFdXJt1u8r9JyT3ANE1fg539DGNA3uERJ3PopUC lWPg== X-Forwarded-Encrypted: i=1; AJvYcCVZ3OPb0w3Ev7ZUKqh5AhRxOzXTmkualLQRL/DHerfCUiEJ12Mpm6p8CsMrW/6hmkPxX5qwAy0pRnTjmsA=@vger.kernel.org X-Gm-Message-State: AOJu0Yw3A7M8yX1wuGXMo/kWCqfJYLWdSRCiP7A62oWSk7L/LhtAnzEA AYLpyZoRr0MoSOCSMMSAl97+uXC6BolUytDIrEaIk8hFXgLZFTUZC3LOoU16BtM= X-Google-Smtp-Source: AGHT+IHH3ayd9kjunKCi0fcv1oW7BSHl+Fqgjznie8H85E156jTz9ETEojZnazg/dV1kxTApadLXbw== X-Received: by 2002:a05:600c:3b0d:b0:428:10d7:a4b1 with SMTP id 5b1f17b1804b1-4311df56e7bmr135747445e9.25.1729000595270; Tue, 15 Oct 2024 06:56:35 -0700 (PDT) Received: from [127.0.1.1] (frhb82016ds.ikexpress.com. [185.246.87.17]) by smtp.gmail.com with ESMTPSA id 5b1f17b1804b1-4313f56f241sm18848295e9.22.2024.10.15.06.56.34 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 15 Oct 2024 06:56:34 -0700 (PDT) From: Guillaume Stols Date: Tue, 15 Oct 2024 13:56:16 +0000 Subject: [PATCH v5 3/8] Documentation: iio: Document ad7606 driver Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable Message-Id: <20241015-ad7606_add_iio_backend_support-v5-3-654faf1ae08c@baylibre.com> References: <20241015-ad7606_add_iio_backend_support-v5-0-654faf1ae08c@baylibre.com> In-Reply-To: <20241015-ad7606_add_iio_backend_support-v5-0-654faf1ae08c@baylibre.com> To: =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= , Lars-Peter Clausen , Michael Hennerich , Jonathan Cameron , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Greg Kroah-Hartman , "Rafael J. Wysocki" , Jonathan Corbet Cc: linux-pwm@vger.kernel.org, linux-kernel@vger.kernel.org, Michael Hennerich , linux-fbdev@vger.kernel.org, linux-iio@vger.kernel.org, devicetree@vger.kernel.org, linux-doc@vger.kernel.org, aardelean@baylibre.com, dlechner@baylibre.com, jstephan@baylibre.com, nuno.sa@analog.com, Jonathan Cameron , Guillaume Stols X-Mailer: b4 0.14.1 X-Developer-Signature: v=1; a=ed25519-sha256; t=1729000592; l=6859; i=gstols@baylibre.com; s=20240417; h=from:subject:message-id; bh=gYRorQljls7gnt12GddZsLRjR3XCK4N21cRs97XBdSo=; b=Oup2lEs68aPov+l9kBPkGocBP+fxR3rFBu8pSGtAEJLWbIMWOT+Kpkk5kuVkBzWEMTWbaAZ0l 5f0/2Ahg83UDGW2sF9wHT3PA6FcSPErEglRPaNC5risPwwgSSN1foNF X-Developer-Key: i=gstols@baylibre.com; a=ed25519; pk=XvMm5WHuV67sGYOJZqIYzXndbaJOlNd8Q6li6vnb4Cs= The Analog Devices Inc. AD7606 (and similar chips) are complex ADCs that will benefit from a detailed driver documentation. This documents the current features supported by the driver. Signed-off-by: Guillaume Stols --- Documentation/iio/ad7606.rst | 145 +++++++++++++++++++++++++++++++++++++++= ++++ Documentation/iio/index.rst | 1 + MAINTAINERS | 1 + 3 files changed, 147 insertions(+) diff --git a/Documentation/iio/ad7606.rst b/Documentation/iio/ad7606.rst new file mode 100644 index 000000000000..a1173708b489 --- /dev/null +++ b/Documentation/iio/ad7606.rst @@ -0,0 +1,145 @@ +.. SPDX-License-Identifier: GPL-2.0-only + +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D +AD7606 driver +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D + +ADC driver for Analog Devices Inc. AD7606 and similar devices. The module = name +is ``ad7606``. + +Supported devices +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D + +The following chips are supported by this driver: + +* `AD7605 `_ +* `AD7606 `_ +* `AD7606B `_ +* `AD7616 `_ + +Supported features +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D + +SPI wiring modes +---------------- + +These ADCs can output data on several SDO lines (1/2/4/8). The driver +currently supports only 1 SDO line. + +Parallel wiring mode +-------------------- + +There is also a parallel interface, with 16 lines (that can be reduced to = 8 in +byte mode). The parallel interface is selected by declaring the device as +platform in the device tree (with no io-backends node defined, see below). + +IIO-backend mode +---------------- + +This mode allows to reach the best sample rates, but it requires an extern= al +hardware (eg HDL or APU) to handle the low level communication. +The backend mode is enabled when through the definition of the "io-backend= s" +property in the device tree. + +The reference configuration for the current implementation of IIO-backend = mode +is the HDL reference provided by ADI: +https://wiki.analog.com/resources/eval/user-guides/ad7606x-fmc/hdl + +This implementation embeds an IIO-backend compatible IP (adi-axi-adc) and = a PWM +connected to the conversion trigger pin. + +.. code-block:: + + +---+ +-------------------------= --- + | | +-------+ |AD76xx + | A | controls | | | + | D |-------------->| PWM |-------------->| cnvst + | 7 | | | | + | 6 | +-------+ | + | 0 | controls +-----------+-----------+ | + | 6 |---------->| | |<--| frstdata + | | | Backend | Backend |<--| busy + | D | | Driver | | | + | R | | | |-->| clk + | I | requests |+---------+| DMA | | + | V |----------->| Buffer ||<---- |<=3D>| DATA + | E | |+---------+| | | + | R | +-----------+-----------+ | + | |-------------------------------------->| reset/configuration gpios + +---+ +-------------------------= ---- + + +Software and hardware modes +--------------------------- + +While all the AD7606/AD7616 series parts can be configured using GPIOs, so= me of +them can be configured using register. + +The chips that support software mode have more values available for config= uring +the device, as well as more settings, and allow to control the range and +calibration per channel. + +The following settings are available per channel in software mode: + - Scale + +Also, there is a broader choice of oversampling ratios in software mode. + +Conversion triggering +--------------------- + +The conversion can be triggered by two distinct ways: + + - A GPIO is connected to the conversion trigger pin, and this GPIO is con= trolled + by the driver directly. In this configuration, the driver sets back the + conversion trigger pin to high as soon as it has read all the conversio= ns. + + - An external source is connected to the conversion trigger pin. In the + current implementation, it must be a PWM. In this configuration, the dr= iver + does not control directly the conversion trigger pin. Instead, it can + control the PWM's frequency. This trigger is enabled only for iio-backe= nd. + +Reference voltage +----------------- + +2 possible reference voltage sources are supported: + + - Internal reference (2.5V) + - External reference (2.5V) + +The source is determined by the device tree. If ``refin-supply`` is presen= t, +then the external reference is used, otherwise the internal reference is u= sed. + +Oversampling +------------ + +This family supports oversampling to improve SNR. +In software mode, the following ratios are available: +1 (oversampling disabled)/2/4/8/16/32/64/128/256. + +Unimplemented features +---------------------- + +- 2/4/8 SDO lines +- CRC indication +- Calibration + +Device buffers +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D + +IIO triggered buffer +-------------------- + +This driver supports IIO triggered buffers, with a "built in" trigger, i.e= the +trigger is allocated and linked by the driver, and a new conversion is tri= ggered +as soon as the samples are transferred, and a timestamp channel is added t= o make +up for the potential jitter induced by the delays in the interrupt handlin= g. + +IIO backend buffer +------------------ + +When IIO backend is used, the trigger is not needed, and the sample rate is +considered as stable. There is no timestamp channel. The communication is +delegated to an external logic, called a backend, and the backend's driver +handles the buffer. When this mode is enabled, the driver cannot control t= he +conversion pin, because the busy pin is bound to the backend. + diff --git a/Documentation/iio/index.rst b/Documentation/iio/index.rst index dfcf9618568a..88bc36326b74 100644 --- a/Documentation/iio/index.rst +++ b/Documentation/iio/index.rst @@ -21,6 +21,7 @@ Industrial I/O Kernel Drivers ad4000 ad4695 ad7380 + ad7606 ad7944 adis16475 adis16480 diff --git a/MAINTAINERS b/MAINTAINERS index 32719c014888..2793a5765fa8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1572,6 +1572,7 @@ F: Documentation/ABI/testing/sysfs-bus-iio-frequency-= adf4350 F: Documentation/devicetree/bindings/iio/*/adi,* F: Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml F: Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml +F: Documentation/iio/ad7606.rst F: drivers/iio/*/ad* F: drivers/iio/adc/ltc249* F: drivers/iio/amplifiers/hmc425a.c --=20 2.34.1