From nobody Wed Nov 27 12:22:51 2024 Received: from mx0b-0031df01.pphosted.com (mx0b-0031df01.pphosted.com [205.220.180.131]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 7588A1EF0BA; Fri, 11 Oct 2024 00:07:49 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=205.220.180.131 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1728605273; cv=none; b=WSYsEMiKQeeMFW+8Q1oYL6bKRiDim5ohlHEhH9bYOg46XTNek86w4kGrAc/2/K0ePBBSDXj/azCgapVRRtkZYvTb0AMOW0KFv8jGCYqrh64orWnc+XNnK0da8Lq2330HqeSc0ouynamu9xZwkRZwcOw8km7oUHV+R1RJr0JM1gc= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1728605273; c=relaxed/simple; bh=2gbNPR4HT3KCNH1iLPbrMhv7sa3KS/QWcCgtrWs29n8=; h=From:To:CC:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version:Content-Type; b=GM/b1M3/0Zll+BVLkKt8f3Am0A5wEwLGeEL58bO7b56JePWEW028w8gwCB+qgGswORg4aXUOZX2AznqevhseT//15oStbL48R93E92EkhXrX/vCxahgtp0BhVmkyTAQo0FxD4iPmjXd16oX/3ja5k4Rv7PMt4Fx7Cmk4mlUH1pM= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=quicinc.com; spf=pass smtp.mailfrom=quicinc.com; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b=W8PfHFPP; arc=none smtp.client-ip=205.220.180.131 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=quicinc.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=quicinc.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="W8PfHFPP" Received: from pps.filterd (m0279869.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.18.1.2/8.18.1.2) with ESMTP id 49AC8wmN032759; Fri, 11 Oct 2024 00:07:16 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h= cc:content-transfer-encoding:content-type:date:from:in-reply-to :message-id:mime-version:references:subject:to; s=qcppdkim1; bh= 3kRWtzKHzpDZGUM6HIQWwxuhzWWJZQpy6vSz2bZhVR0=; b=W8PfHFPPzmB+ZbLx z8j24N/jt9nr5+T8GdcEn8l95ucKLXvsRlPVf8ZiI9pz+BYPTDUDIV251kAbFUR8 xz9Uby2AwIhhx2LkCGNUtEc4dWJy6d7xHG1moQlhxZN3ARBGt6wRqIHHwszE6BKC aUo/E6a26r/zm5FNGYYsdnfSjLlapJqQdJsfulJ5FZ08iIUnsu9q44ekHY44YIUc HLeIMl5Yo6bvxQx2F4gh1vQsVMX9c4REFZdbORCxAnGr+lhbhRPKo81y6sj+Teir uA3/1hj5InOntC4ZCbB2vBJX068fHRBE8moZRpcwP1mjfHupLpPRGNQUvGRq3+Xq kLFU1w== Received: from nalasppmta02.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 424cy7mjyu-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Fri, 11 Oct 2024 00:07:16 +0000 (GMT) Received: from nalasex01b.na.qualcomm.com (nalasex01b.na.qualcomm.com [10.47.209.197]) by NALASPPMTA02.qualcomm.com (8.18.1.2/8.18.1.2) with ESMTPS id 49B07EQA016391 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Fri, 11 Oct 2024 00:07:14 GMT Received: from hu-wcheng-lv.qualcomm.com (10.49.16.6) by nalasex01b.na.qualcomm.com (10.47.209.197) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.1544.9; Thu, 10 Oct 2024 17:07:14 -0700 From: Wesley Cheng To: , , , , , , , , , , , , , , CC: , , , , , , , , Wesley Cheng Subject: [PATCH v28 21/32] ASoC: qcom: qdsp6: Introduce USB AFE port to q6dsp Date: Thu, 10 Oct 2024 17:06:27 -0700 Message-ID: <20241011000650.2585600-43-quic_wcheng@quicinc.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20241011000650.2585600-1-quic_wcheng@quicinc.com> References: <20241011000650.2585600-1-quic_wcheng@quicinc.com> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable X-ClientProxiedBy: nalasex01b.na.qualcomm.com (10.47.209.197) To nalasex01b.na.qualcomm.com (10.47.209.197) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-ORIG-GUID: Q5FGHxPzl3ZcfYl-MsTz2SS-2D1Ut9Jd X-Proofpoint-GUID: Q5FGHxPzl3ZcfYl-MsTz2SS-2D1Ut9Jd X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.293,Aquarius:18.0.1039,Hydra:6.0.680,FMLib:17.12.60.29 definitions=2024-09-06_09,2024-09-06_01,2024-09-02_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 phishscore=0 impostorscore=0 adultscore=0 mlxscore=0 lowpriorityscore=0 suspectscore=0 spamscore=0 priorityscore=1501 clxscore=1015 bulkscore=0 malwarescore=0 mlxlogscore=999 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.19.0-2409260000 definitions=main-2410100159 Content-Type: text/plain; charset="utf-8" The QC ADSP is able to support USB playback endpoints, so that the main application processor can be placed into lower CPU power modes. This adds the required AFE port configurations and port start command to start an audio session. Specifically, the QC ADSP can support all potential endpoints that are exposed by the audio data interface. This includes isochronous data endpoints, in either synchronous mode or asynchronous mode. In the latter case both implicit or explicit feedback endpoints are supported. The size of audio samples sent per USB frame (microframe) will be adjusted based on information received on the feedback endpoint. Some pre-requisites are needed before issuing the AFE port start command, such as setting the USB AFE dev_token. This carries information about the available USB SND cards and PCM devices that have been discovered on the USB bus. The dev_token field is used by the audio DSP to notify the USB offload driver of which card and PCM index to enable playback on. Signed-off-by: Wesley Cheng --- sound/soc/qcom/qdsp6/q6afe-dai.c | 60 +++++++ sound/soc/qcom/qdsp6/q6afe.c | 192 ++++++++++++++++++++++- sound/soc/qcom/qdsp6/q6afe.h | 36 ++++- sound/soc/qcom/qdsp6/q6dsp-lpass-ports.c | 23 +++ sound/soc/qcom/qdsp6/q6dsp-lpass-ports.h | 1 + sound/soc/qcom/qdsp6/q6routing.c | 32 +++- 6 files changed, 341 insertions(+), 3 deletions(-) diff --git a/sound/soc/qcom/qdsp6/q6afe-dai.c b/sound/soc/qcom/qdsp6/q6afe-= dai.c index a9c4f896a7df..b368e781a0a1 100644 --- a/sound/soc/qcom/qdsp6/q6afe-dai.c +++ b/sound/soc/qcom/qdsp6/q6afe-dai.c @@ -92,6 +92,39 @@ static int q6hdmi_hw_params(struct snd_pcm_substream *su= bstream, return 0; } =20 +static int q6afe_usb_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct q6afe_dai_data *dai_data =3D dev_get_drvdata(dai->dev); + int channels =3D params_channels(params); + int rate =3D params_rate(params); + struct q6afe_usb_cfg *usb =3D &dai_data->port_config[dai->id].usb_audio; + + usb->sample_rate =3D rate; + usb->num_channels =3D channels; + + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_U16_LE: + case SNDRV_PCM_FORMAT_S16_LE: + usb->bit_width =3D 16; + break; + case SNDRV_PCM_FORMAT_S24_LE: + case SNDRV_PCM_FORMAT_S24_3LE: + usb->bit_width =3D 24; + break; + case SNDRV_PCM_FORMAT_S32_LE: + usb->bit_width =3D 32; + break; + default: + dev_err(dai->dev, "%s: invalid format %d\n", + __func__, params_format(params)); + return -EINVAL; + } + + return 0; +} + static int q6i2s_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) @@ -392,6 +425,10 @@ static int q6afe_dai_prepare(struct snd_pcm_substream = *substream, q6afe_cdc_dma_port_prepare(dai_data->port[dai->id], &dai_data->port_config[dai->id].dma_cfg); break; + case USB_RX: + q6afe_usb_port_prepare(dai_data->port[dai->id], + &dai_data->port_config[dai->id].usb_audio); + break; default: return -EINVAL; } @@ -618,6 +655,9 @@ static const struct snd_soc_dapm_route q6afe_dapm_route= s[] =3D { {"TX_CODEC_DMA_TX_5", NULL, "TX_CODEC_DMA_TX_5 Capture"}, {"RX_CODEC_DMA_RX_6 Playback", NULL, "RX_CODEC_DMA_RX_6"}, {"RX_CODEC_DMA_RX_7 Playback", NULL, "RX_CODEC_DMA_RX_7"}, + + /* USB playback AFE port receives data for playback, hence use the RX por= t */ + {"USB Playback", NULL, "USB_RX"}, }; =20 static int msm_dai_q6_dai_probe(struct snd_soc_dai *dai) @@ -645,6 +685,23 @@ static int msm_dai_q6_dai_remove(struct snd_soc_dai *d= ai) return 0; } =20 +static const struct snd_soc_dai_ops q6afe_usb_ops =3D { + .probe =3D msm_dai_q6_dai_probe, + .prepare =3D q6afe_dai_prepare, + .hw_params =3D q6afe_usb_hw_params, + /* + * Shutdown callback required to stop the USB AFE port, which is enabled + * by the prepare() stage. This stops the audio traffic on the USB AFE + * port on the Q6DSP. + */ + .shutdown =3D q6afe_dai_shutdown, + /* + * Startup callback not needed, as AFE port start command passes the PCM + * parameters within the AFE command, which is provided by the PCM core + * during the prepare() stage. + */ +}; + static const struct snd_soc_dai_ops q6hdmi_ops =3D { .probe =3D msm_dai_q6_dai_probe, .remove =3D msm_dai_q6_dai_remove, @@ -943,6 +1000,8 @@ static const struct snd_soc_dapm_widget q6afe_dai_widg= ets[] =3D { 0, SND_SOC_NOPM, 0, 0), SND_SOC_DAPM_AIF_IN("RX_CODEC_DMA_RX_7", "NULL", 0, SND_SOC_NOPM, 0, 0), + + SND_SOC_DAPM_AIF_IN("USB_RX", NULL, 0, SND_SOC_NOPM, 0, 0), }; =20 static const struct snd_soc_component_driver q6afe_dai_component =3D { @@ -1057,6 +1116,7 @@ static int q6afe_dai_dev_probe(struct platform_device= *pdev) cfg.q6i2s_ops =3D &q6i2s_ops; cfg.q6tdm_ops =3D &q6tdm_ops; cfg.q6dma_ops =3D &q6dma_ops; + cfg.q6usb_ops =3D &q6afe_usb_ops; dais =3D q6dsp_audio_ports_set_config(dev, &cfg, &num_dais); =20 return devm_snd_soc_register_component(dev, &q6afe_dai_component, dais, n= um_dais); diff --git a/sound/soc/qcom/qdsp6/q6afe.c b/sound/soc/qcom/qdsp6/q6afe.c index ef7557be5d66..3ee6ff8a6bc3 100644 --- a/sound/soc/qcom/qdsp6/q6afe.c +++ b/sound/soc/qcom/qdsp6/q6afe.c @@ -35,6 +35,8 @@ #define AFE_MODULE_TDM 0x0001028A =20 #define AFE_PARAM_ID_CDC_SLIMBUS_SLAVE_CFG 0x00010235 +#define AFE_PARAM_ID_USB_AUDIO_DEV_PARAMS 0x000102A5 +#define AFE_PARAM_ID_USB_AUDIO_DEV_LPCM_FMT 0x000102AA =20 #define AFE_PARAM_ID_LPAIF_CLK_CONFIG 0x00010238 #define AFE_PARAM_ID_INT_DIGITAL_CDC_CLK_CONFIG 0x00010239 @@ -44,6 +46,7 @@ #define AFE_PARAM_ID_TDM_CONFIG 0x0001029D #define AFE_PARAM_ID_PORT_SLOT_MAPPING_CONFIG 0x00010297 #define AFE_PARAM_ID_CODEC_DMA_CONFIG 0x000102B8 +#define AFE_PARAM_ID_USB_AUDIO_CONFIG 0x000102A4 #define AFE_CMD_REMOTE_LPASS_CORE_HW_VOTE_REQUEST 0x000100f4 #define AFE_CMD_RSP_REMOTE_LPASS_CORE_HW_VOTE_REQUEST 0x000100f5 #define AFE_CMD_REMOTE_LPASS_CORE_HW_DEVOTE_REQUEST 0x000100f6 @@ -72,12 +75,16 @@ #define AFE_PORT_CONFIG_I2S_WS_SRC_INTERNAL 0x1 #define AFE_LINEAR_PCM_DATA 0x0 =20 +#define AFE_API_MINOR_VERSION_USB_AUDIO_CONFIG 0x1 =20 /* Port IDs */ #define AFE_API_VERSION_HDMI_CONFIG 0x1 #define AFE_PORT_ID_MULTICHAN_HDMI_RX 0x100E #define AFE_PORT_ID_HDMI_OVER_DP_RX 0x6020 =20 +/* USB AFE port */ +#define AFE_PORT_ID_USB_RX 0x7000 + #define AFE_API_VERSION_SLIMBUS_CONFIG 0x1 /* Clock set API version */ #define AFE_API_VERSION_CLOCK_SET 1 @@ -513,12 +520,96 @@ struct afe_param_id_cdc_dma_cfg { u16 active_channels_mask; } __packed; =20 +struct afe_param_id_usb_cfg { +/* Minor version used for tracking USB audio device configuration. + * Supported values: AFE_API_MINOR_VERSION_USB_AUDIO_CONFIG + */ + u32 cfg_minor_version; +/* Sampling rate of the port. + * Supported values: + * - AFE_PORT_SAMPLE_RATE_8K + * - AFE_PORT_SAMPLE_RATE_11025 + * - AFE_PORT_SAMPLE_RATE_12K + * - AFE_PORT_SAMPLE_RATE_16K + * - AFE_PORT_SAMPLE_RATE_22050 + * - AFE_PORT_SAMPLE_RATE_24K + * - AFE_PORT_SAMPLE_RATE_32K + * - AFE_PORT_SAMPLE_RATE_44P1K + * - AFE_PORT_SAMPLE_RATE_48K + * - AFE_PORT_SAMPLE_RATE_96K + * - AFE_PORT_SAMPLE_RATE_192K + */ + u32 sample_rate; +/* Bit width of the sample. + * Supported values: 16, 24 + */ + u16 bit_width; +/* Number of channels. + * Supported values: 1 and 2 + */ + u16 num_channels; +/* Data format supported by the USB. The supported value is + * 0 (#AFE_USB_AUDIO_DATA_FORMAT_LINEAR_PCM). + */ + u16 data_format; +/* this field must be 0 */ + u16 reserved; +/* device token of actual end USB audio device */ + u32 dev_token; +/* endianness of this interface */ + u32 endian; +/* service interval */ + u32 service_interval; +} __packed; + +/** + * struct afe_param_id_usb_audio_dev_params + * @cfg_minor_version: Minor version used for tracking USB audio device + * configuration. + * Supported values: + * AFE_API_MINOR_VERSION_USB_AUDIO_CONFIG + * @dev_token: device token of actual end USB audio device + **/ +struct afe_param_id_usb_audio_dev_params { + u32 cfg_minor_version; + u32 dev_token; +} __packed; + +/** + * struct afe_param_id_usb_audio_dev_lpcm_fmt + * @cfg_minor_version: Minor version used for tracking USB audio device + * configuration. + * Supported values: + * AFE_API_MINOR_VERSION_USB_AUDIO_CONFIG + * @endian: endianness of this interface + **/ +struct afe_param_id_usb_audio_dev_lpcm_fmt { + u32 cfg_minor_version; + u32 endian; +} __packed; + +#define AFE_PARAM_ID_USB_AUDIO_SVC_INTERVAL 0x000102B7 + +/** + * struct afe_param_id_usb_audio_svc_interval + * @cfg_minor_version: Minor version used for tracking USB audio device + * configuration. + * Supported values: + * AFE_API_MINOR_VERSION_USB_AUDIO_CONFIG + * @svc_interval: service interval + **/ +struct afe_param_id_usb_audio_svc_interval { + u32 cfg_minor_version; + u32 svc_interval; +} __packed; + union afe_port_config { struct afe_param_id_hdmi_multi_chan_audio_cfg hdmi_multi_ch; struct afe_param_id_slimbus_cfg slim_cfg; struct afe_param_id_i2s_cfg i2s_cfg; struct afe_param_id_tdm_cfg tdm_cfg; struct afe_param_id_cdc_dma_cfg dma_cfg; + struct afe_param_id_usb_cfg usb_cfg; } __packed; =20 =20 @@ -833,6 +924,7 @@ static struct afe_port_map port_maps[AFE_PORT_MAX] =3D { RX_CODEC_DMA_RX_6, 1, 1}, [RX_CODEC_DMA_RX_7] =3D { AFE_PORT_ID_RX_CODEC_DMA_RX_7, RX_CODEC_DMA_RX_7, 1, 1}, + [USB_RX] =3D { AFE_PORT_ID_USB_RX, USB_RX, 1, 1}, }; =20 static void q6afe_port_free(struct kref *ref) @@ -1290,6 +1382,101 @@ void q6afe_tdm_port_prepare(struct q6afe_port *port, } EXPORT_SYMBOL_GPL(q6afe_tdm_port_prepare); =20 +/** + * afe_port_send_usb_dev_param() - Send USB dev token + * + * @port: Instance of afe port + * @cardidx: USB SND card index to reference + * @pcmidx: USB SND PCM device index to reference + * + * The USB dev token carries information about which USB SND card instance= and + * PCM device to execute the offload on. This information is carried thro= ugh + * to the stream enable QMI request, which is handled by the offload class + * driver. The information is parsed to determine which USB device to que= ry + * the required resources for. + */ +int afe_port_send_usb_dev_param(struct q6afe_port *port, int cardidx, int = pcmidx) +{ + struct afe_param_id_usb_audio_dev_params usb_dev; + int ret; + + memset(&usb_dev, 0, sizeof(usb_dev)); + + usb_dev.cfg_minor_version =3D AFE_API_MINOR_VERSION_USB_AUDIO_CONFIG; + usb_dev.dev_token =3D (cardidx << 16) | (pcmidx << 8); + ret =3D q6afe_port_set_param_v2(port, &usb_dev, + AFE_PARAM_ID_USB_AUDIO_DEV_PARAMS, + AFE_MODULE_AUDIO_DEV_INTERFACE, + sizeof(usb_dev)); + if (ret) + dev_err(port->afe->dev, "%s: AFE device param cmd failed %d\n", + __func__, ret); + + return ret; +} +EXPORT_SYMBOL_GPL(afe_port_send_usb_dev_param); + +static int afe_port_send_usb_params(struct q6afe_port *port, struct q6afe_= usb_cfg *cfg) +{ + union afe_port_config *pcfg =3D &port->port_cfg; + struct afe_param_id_usb_audio_dev_lpcm_fmt lpcm_fmt; + struct afe_param_id_usb_audio_svc_interval svc_int; + int ret; + + if (!pcfg) { + dev_err(port->afe->dev, "%s: Error, no configuration data\n", __func__); + ret =3D -EINVAL; + goto exit; + } + + memset(&lpcm_fmt, 0, sizeof(lpcm_fmt)); + memset(&svc_int, 0, sizeof(svc_int)); + + lpcm_fmt.cfg_minor_version =3D AFE_API_MINOR_VERSION_USB_AUDIO_CONFIG; + lpcm_fmt.endian =3D pcfg->usb_cfg.endian; + ret =3D q6afe_port_set_param_v2(port, &lpcm_fmt, + AFE_PARAM_ID_USB_AUDIO_DEV_LPCM_FMT, + AFE_MODULE_AUDIO_DEV_INTERFACE, sizeof(lpcm_fmt)); + if (ret) { + dev_err(port->afe->dev, "%s: AFE device param cmd LPCM_FMT failed %d\n", + __func__, ret); + goto exit; + } + + svc_int.cfg_minor_version =3D AFE_API_MINOR_VERSION_USB_AUDIO_CONFIG; + svc_int.svc_interval =3D pcfg->usb_cfg.service_interval; + ret =3D q6afe_port_set_param_v2(port, &svc_int, + AFE_PARAM_ID_USB_AUDIO_SVC_INTERVAL, + AFE_MODULE_AUDIO_DEV_INTERFACE, sizeof(svc_int)); + if (ret) + dev_err(port->afe->dev, "%s: AFE device param cmd svc_interval failed %d= \n", + __func__, ret); + +exit: + return ret; +} + +/** + * q6afe_usb_port_prepare() - Prepare usb afe port. + * + * @port: Instance of afe port + * @cfg: USB configuration for the afe port + * + */ +void q6afe_usb_port_prepare(struct q6afe_port *port, + struct q6afe_usb_cfg *cfg) +{ + union afe_port_config *pcfg =3D &port->port_cfg; + + pcfg->usb_cfg.cfg_minor_version =3D AFE_API_MINOR_VERSION_USB_AUDIO_CONFI= G; + pcfg->usb_cfg.sample_rate =3D cfg->sample_rate; + pcfg->usb_cfg.num_channels =3D cfg->num_channels; + pcfg->usb_cfg.bit_width =3D cfg->bit_width; + + afe_port_send_usb_params(port, cfg); +} +EXPORT_SYMBOL_GPL(q6afe_usb_port_prepare); + /** * q6afe_hdmi_port_prepare() - Prepare hdmi afe port. * @@ -1612,7 +1799,10 @@ struct q6afe_port *q6afe_port_get_from_id(struct dev= ice *dev, int id) break; case AFE_PORT_ID_WSA_CODEC_DMA_RX_0 ... AFE_PORT_ID_RX_CODEC_DMA_RX_7: cfg_type =3D AFE_PARAM_ID_CODEC_DMA_CONFIG; - break; + break; + case AFE_PORT_ID_USB_RX: + cfg_type =3D AFE_PARAM_ID_USB_AUDIO_CONFIG; + break; default: dev_err(dev, "Invalid port id 0x%x\n", port_id); return ERR_PTR(-EINVAL); diff --git a/sound/soc/qcom/qdsp6/q6afe.h b/sound/soc/qcom/qdsp6/q6afe.h index 65d0676075e1..a29abe4ce436 100644 --- a/sound/soc/qcom/qdsp6/q6afe.h +++ b/sound/soc/qcom/qdsp6/q6afe.h @@ -3,7 +3,7 @@ #ifndef __Q6AFE_H__ #define __Q6AFE_H__ =20 -#define AFE_PORT_MAX 129 +#define AFE_PORT_MAX 137 =20 #define MSM_AFE_PORT_TYPE_RX 0 #define MSM_AFE_PORT_TYPE_TX 1 @@ -203,6 +203,36 @@ struct q6afe_cdc_dma_cfg { u16 active_channels_mask; }; =20 +/** + * struct q6afe_usb_cfg + * @cfg_minor_version: Minor version used for tracking USB audio device + * configuration. + * Supported values: + * AFE_API_MINOR_VERSION_USB_AUDIO_CONFIG + * @sample_rate: Sampling rate of the port + * Supported values: + * AFE_PORT_SAMPLE_RATE_8K + * AFE_PORT_SAMPLE_RATE_11025 + * AFE_PORT_SAMPLE_RATE_12K + * AFE_PORT_SAMPLE_RATE_16K + * AFE_PORT_SAMPLE_RATE_22050 + * AFE_PORT_SAMPLE_RATE_24K + * AFE_PORT_SAMPLE_RATE_32K + * AFE_PORT_SAMPLE_RATE_44P1K + * AFE_PORT_SAMPLE_RATE_48K + * AFE_PORT_SAMPLE_RATE_96K + * AFE_PORT_SAMPLE_RATE_192K + * @bit_width: Bit width of the sample. + * Supported values: 16, 24 + * @num_channels: Number of channels + * Supported values: 1, 2 + **/ +struct q6afe_usb_cfg { + u32 cfg_minor_version; + u32 sample_rate; + u16 bit_width; + u16 num_channels; +}; =20 struct q6afe_port_config { struct q6afe_hdmi_cfg hdmi; @@ -210,6 +240,7 @@ struct q6afe_port_config { struct q6afe_i2s_cfg i2s_cfg; struct q6afe_tdm_cfg tdm; struct q6afe_cdc_dma_cfg dma_cfg; + struct q6afe_usb_cfg usb_audio; }; =20 struct q6afe_port; @@ -219,6 +250,8 @@ int q6afe_port_start(struct q6afe_port *port); int q6afe_port_stop(struct q6afe_port *port); void q6afe_port_put(struct q6afe_port *port); int q6afe_get_port_id(int index); +void q6afe_usb_port_prepare(struct q6afe_port *port, + struct q6afe_usb_cfg *cfg); void q6afe_hdmi_port_prepare(struct q6afe_port *port, struct q6afe_hdmi_cfg *cfg); void q6afe_slim_port_prepare(struct q6afe_port *port, @@ -228,6 +261,7 @@ void q6afe_tdm_port_prepare(struct q6afe_port *port, st= ruct q6afe_tdm_cfg *cfg); void q6afe_cdc_dma_port_prepare(struct q6afe_port *port, struct q6afe_cdc_dma_cfg *cfg); =20 +int afe_port_send_usb_dev_param(struct q6afe_port *port, int cardidx, int = pcmidx); int q6afe_port_set_sysclk(struct q6afe_port *port, int clk_id, int clk_src, int clk_root, unsigned int freq, int dir); diff --git a/sound/soc/qcom/qdsp6/q6dsp-lpass-ports.c b/sound/soc/qcom/qdsp= 6/q6dsp-lpass-ports.c index 4919001de08b..4a96b11f7fd1 100644 --- a/sound/soc/qcom/qdsp6/q6dsp-lpass-ports.c +++ b/sound/soc/qcom/qdsp6/q6dsp-lpass-ports.c @@ -97,6 +97,26 @@ } =20 static struct snd_soc_dai_driver q6dsp_audio_fe_dais[] =3D { + { + .playback =3D { + .stream_name =3D "USB Playback", + .rates =3D SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | + SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | + SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | + SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000 | + SNDRV_PCM_RATE_192000, + .formats =3D SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE | + SNDRV_PCM_FMTBIT_U16_LE | SNDRV_PCM_FMTBIT_U16_BE | + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S24_BE | + SNDRV_PCM_FMTBIT_U24_LE | SNDRV_PCM_FMTBIT_U24_BE, + .channels_min =3D 1, + .channels_max =3D 2, + .rate_min =3D 8000, + .rate_max =3D 192000, + }, + .id =3D USB_RX, + .name =3D "USB_RX", + }, { .playback =3D { .stream_name =3D "HDMI Playback", @@ -624,6 +644,9 @@ struct snd_soc_dai_driver *q6dsp_audio_ports_set_config= (struct device *dev, case WSA_CODEC_DMA_RX_0 ... RX_CODEC_DMA_RX_7: q6dsp_audio_fe_dais[i].ops =3D cfg->q6dma_ops; break; + case USB_RX: + q6dsp_audio_fe_dais[i].ops =3D cfg->q6usb_ops; + break; default: break; } diff --git a/sound/soc/qcom/qdsp6/q6dsp-lpass-ports.h b/sound/soc/qcom/qdsp= 6/q6dsp-lpass-ports.h index 7f052c8a1257..d8dde6dd0aca 100644 --- a/sound/soc/qcom/qdsp6/q6dsp-lpass-ports.h +++ b/sound/soc/qcom/qdsp6/q6dsp-lpass-ports.h @@ -11,6 +11,7 @@ struct q6dsp_audio_port_dai_driver_config { const struct snd_soc_dai_ops *q6i2s_ops; const struct snd_soc_dai_ops *q6tdm_ops; const struct snd_soc_dai_ops *q6dma_ops; + const struct snd_soc_dai_ops *q6usb_ops; }; =20 struct snd_soc_dai_driver *q6dsp_audio_ports_set_config(struct device *dev, diff --git a/sound/soc/qcom/qdsp6/q6routing.c b/sound/soc/qcom/qdsp6/q6rout= ing.c index 81fde0681f95..d55588f249ad 100644 --- a/sound/soc/qcom/qdsp6/q6routing.c +++ b/sound/soc/qcom/qdsp6/q6routing.c @@ -435,6 +435,26 @@ static struct session_data *get_session_from_id(struct= msm_routing_data *data, =20 return NULL; } + +static bool is_usb_routing_enabled(struct msm_routing_data *data) +{ + int i; + + /* + * Loop through current sessions to see if there are active routes + * to the USB_RX backend DAI. The USB offload routing is designed + * similarly to the non offload path. If there are multiple PCM + * devices associated with the ASoC platform card, only one active + * path can be routed to the USB offloaded endpoint. + */ + for (i =3D 0; i < MAX_SESSIONS; i++) { + if (data->sessions[i].port_id =3D=3D USB_RX) + return true; + } + + return false; +} + /** * q6routing_stream_close() - Deregister a stream * @@ -499,7 +519,8 @@ static int msm_routing_put_audio_mixer(struct snd_kcont= rol *kcontrol, struct session_data *session =3D &data->sessions[session_id]; =20 if (ucontrol->value.integer.value[0]) { - if (session->port_id =3D=3D be_id) + if (session->port_id =3D=3D be_id || + (be_id =3D=3D USB_RX && is_usb_routing_enabled(data))) return 0; =20 session->port_id =3D be_id; @@ -515,6 +536,9 @@ static int msm_routing_put_audio_mixer(struct snd_kcont= rol *kcontrol, return 1; } =20 +static const struct snd_kcontrol_new usb_mixer_controls[] =3D { + Q6ROUTING_RX_MIXERS(USB_RX) }; + static const struct snd_kcontrol_new hdmi_mixer_controls[] =3D { Q6ROUTING_RX_MIXERS(HDMI_RX) }; =20 @@ -950,6 +974,10 @@ static const struct snd_soc_dapm_widget msm_qdsp6_widg= ets[] =3D { SND_SOC_DAPM_MIXER("MultiMedia8 Mixer", SND_SOC_NOPM, 0, 0, mmul8_mixer_controls, ARRAY_SIZE(mmul8_mixer_controls)), =20 + SND_SOC_DAPM_MIXER("USB Mixer", SND_SOC_NOPM, 0, 0, + usb_mixer_controls, + ARRAY_SIZE(usb_mixer_controls)), + }; =20 static const struct snd_soc_dapm_route intercon[] =3D { @@ -1043,6 +1071,8 @@ static const struct snd_soc_dapm_route intercon[] =3D= { {"MM_UL6", NULL, "MultiMedia6 Mixer"}, {"MM_UL7", NULL, "MultiMedia7 Mixer"}, {"MM_UL8", NULL, "MultiMedia8 Mixer"}, + + Q6ROUTING_RX_DAPM_ROUTE("USB Mixer", "USB_RX"), }; =20 static int routing_hw_params(struct snd_soc_component *component,