From nobody Wed Nov 27 23:37:49 2024 Received: from mail-wr1-f48.google.com (mail-wr1-f48.google.com [209.85.221.48]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 04C701D4159 for ; Mon, 7 Oct 2024 14:03:43 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.221.48 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1728309826; cv=none; b=LDcEktq9/m0sNfFeUVcvM/dicQzkfEbVpypoAO8IetrDY05RGyVogKzHOBMuPZHQtrBolchWxlCibiTAwRT722XutHxzUbaT0l6Mf2S89dvyQKzN7VumFeJhjJGSHjPUPVFJmvU6H+UqkE+eH3gIGxvDYao2sTvo/9t8FDg8Tp8= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1728309826; c=relaxed/simple; bh=JXZ2QhO+d2v8gfTqiKI3ynod/BjsAjCgD6utx+4qdzE=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=oL/ts5OUfBDt597ynZPunBq87fwTFZj/rR18RUWhrdLX0OA6aJDUJBa7tWl2y7d9pm7aE6jOZp8D503DJ1/yr8iPxlNlKNv4u6o6dYOsIQG5dNzvqa/RGQiwOECye/UZ/fdjm4P+HlhXHFJeuLXAN8ofSWV86hIu2CCTW1DSTis= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linaro.org; spf=pass smtp.mailfrom=linaro.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b=H5qHQPaV; arc=none smtp.client-ip=209.85.221.48 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=linaro.org Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="H5qHQPaV" Received: by mail-wr1-f48.google.com with SMTP id ffacd0b85a97d-37cc60c9838so2535240f8f.1 for ; Mon, 07 Oct 2024 07:03:43 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1728309822; x=1728914622; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=9ZtuxoWlLG6MIr63M1MjhSb8isJPhAfS/eTEmbC2Jj4=; b=H5qHQPaVi6MjsZIpI/eAlICyKLLwmbF9c0MaMj9R7WstNMk6SlXAB2vpJ30V63Ffc9 tW3GPTtdtM5B1f5Mg26pQKjh1WgQ8ZXCZcK0iFopO7QSkyc6wFSTEhp8KE646WD85fbE y8jlguwthyrjQ2lpchpRsHgbu1mcKYAGT0X60U42f/W3YioiuGaHeXRVqd/eximLXqYp kff1/2aUT1CP2l1wzpBKA5w9aGSYMW2asPHhWm502oZkYYOs7EsrLs+Sd+j3Yqn3nTPu 8np8oAHClIPFwkgUrv3heFU5ahX/v/ZmEOAspY3W0EaOyuYzpp/Qel5aAfx19wY/ycg8 Iagw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1728309822; x=1728914622; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=9ZtuxoWlLG6MIr63M1MjhSb8isJPhAfS/eTEmbC2Jj4=; b=cBjPCyLJTkvvGOR5cnfOhv9Q+TWdmsbDD3hKqHlTnULb93VMLX9WIx4PJqxgR04CFh 1MOgmw55eYFR01kqApP0icfJ5vzA90NPfhSKL0kUo26s+6SkY35SeIlKivr2EyTuekkZ daRwhf6Ox1Cyh6rWBWhO2vll+KDEXYkh9u/JGML1gqqRDAOw3hmynUt7vNWuoXL0iWNJ fPMU42AM7A1w0g0IZLUxRgMq+368r1tQh59WSxbIyLw6XS+4hpmYLpuo8h/4yARLwHSN YyhKdfeGC8dGg7yAfFwc76enluWwaTrSy1Gj3PL4LRfHi6Yy0ZOIPKKB1v2BypmTtCR+ uKUw== X-Forwarded-Encrypted: i=1; AJvYcCXbN5G1xdrCtidSzvibgkc8bNGApeyqNCGg5o7ymLMJAkmEvmOtqyodtRBDcIwOQ79DPSFedihAU9M8F0c=@vger.kernel.org X-Gm-Message-State: AOJu0YwgeAQAJx3QuD/fwvPgmJAQOSS5Avuj94cOQMnWanY9ZtxPUDGe d4rg/u46SXILCR85u08yg2F0961m94fk9K3Q0eNoE9/j7ymRhUu6ao17RufvU08= X-Google-Smtp-Source: AGHT+IF/B1xSevIP+5+TzWYbnSoeJtkilnmlHNqtPz88imFSsCXjbZ/m6dbc7bF4oZnEAdxTygwlpA== X-Received: by 2002:adf:f04e:0:b0:37c:cc7c:761c with SMTP id ffacd0b85a97d-37d0f66e937mr6688754f8f.3.1728309821984; Mon, 07 Oct 2024 07:03:41 -0700 (PDT) Received: from arrakeen.starnux.net ([2a01:e0a:982:cbb0:52eb:f6ff:feb3:451a]) by smtp.gmail.com with ESMTPSA id ffacd0b85a97d-37d1688a486sm5857022f8f.0.2024.10.07.07.03.41 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 07 Oct 2024 07:03:41 -0700 (PDT) From: Neil Armstrong Date: Mon, 07 Oct 2024 16:03:37 +0200 Subject: [PATCH v3 1/3] dt-bindings: mmc: controller: move properties common with slot out to mmc-controller-common Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable Message-Id: <20241007-topic-amlogic-arm32-upstream-bindings-fixes-convert-meson-mx-sdio-v3-1-ad4eb22c2a8d@linaro.org> References: <20241007-topic-amlogic-arm32-upstream-bindings-fixes-convert-meson-mx-sdio-v3-0-ad4eb22c2a8d@linaro.org> In-Reply-To: <20241007-topic-amlogic-arm32-upstream-bindings-fixes-convert-meson-mx-sdio-v3-0-ad4eb22c2a8d@linaro.org> To: Ulf Hansson , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Kevin Hilman , Jerome Brunet , Martin Blumenstingl Cc: linux-mmc@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org, Neil Armstrong X-Mailer: b4 0.14.1 X-Developer-Signature: v=1; a=openpgp-sha256; l=24383; i=neil.armstrong@linaro.org; h=from:subject:message-id; bh=JXZ2QhO+d2v8gfTqiKI3ynod/BjsAjCgD6utx+4qdzE=; b=owEBbQKS/ZANAwAKAXfc29rIyEnRAcsmYgBnA+o6z99UeVWhjdJGlVpbNpN+CDgvqGkIkP2qxXsK +8FPUZCJAjMEAAEKAB0WIQQ9U8YmyFYF/h30LIt33NvayMhJ0QUCZwPqOgAKCRB33NvayMhJ0VFCD/ wKiXiEvoVPDlQytUikVq0DV2fbusIpm2dCzBbPm5JfwYvkRNpTRbeqmFYtrU15sNwznT6KqGppyN+X SOnt0dzcaUVj5/jBmphOMoA81cpLQc/TpfWwuVoFAs71pMTPWlEp7SvwBEqMI3AXUEADyPbn+jFx8P d2Xk8s/F/VMCCij8Q1KK1RdoXuLJeMfy9zQJFW63oG60ZDsfduLe8TudsdOWG8sKaP504K3lrQFOwC yZufCX8n71jUzSBWH0QPIftSh64EEbQrdnglGMvGVVsPfHt+nqrOpxG65PFeYX//J685Ep1TF1FjSC y5dzjLF/CE7UBuqaKyymwm/Bzm1e+L7eE75j0ErYHJFWZq9jRjdBdEzW0hIgcOfkFxFnAFZB6JlEIh bXvn3G0ttJyaEDlqSdQyYnI4fLp2IDpTMMvv1aHZQAGZHu7/yyaTpL/yeLONwV/Y/jP8g8kunA1+8m SnrZNAVYjV+jR3qqQvKPkva5WCKBZGRhzVDtT7JhN/n3pAoSs00zSOjGpojDjnRj1z6+Qpm2K3zUNR hzSreyJHBGzulcjdVdLMNINWw5aRhzmPkgC5wdU/DFbZoWMh4Tr0v60Gij/Hl4U8DG+wNnef8fb0TZ 8S/vT7VRkvO0bzaPB4XytOVruQ89oUvjiL1EbU7g+zXfgD3gBeod2QuW93OQ== X-Developer-Key: i=neil.armstrong@linaro.org; a=openpgp; fpr=89EC3D058446217450F22848169AB7B1A4CFF8AE Move the common MMC "slot" properties because they are shared by the single-slot or multi-slot controllers, and will help defining a simple mmc-slot bindings document with proper slot properties and nodename. Signed-off-by: Neil Armstrong Reviewed-by: Rob Herring (Arm) --- .../bindings/mmc/mmc-controller-common.yaml | 357 +++++++++++++++++= ++++ .../devicetree/bindings/mmc/mmc-controller.yaml | 344 +----------------= --- 2 files changed, 360 insertions(+), 341 deletions(-) diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller-common.ya= ml b/Documentation/devicetree/bindings/mmc/mmc-controller-common.yaml new file mode 100644 index 000000000000..e02d3cbcc271 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/mmc-controller-common.yaml @@ -0,0 +1,357 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/mmc-controller-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MMC Controller & Slots Common Properties + +maintainers: + - Ulf Hansson + +description: | + These properties are common to multiple MMC host controllers and the + possible slots or ports for multi-slot controllers. + +properties: + "#address-cells": + const: 1 + description: | + The cell is the slot ID if a function subnode is used. + + "#size-cells": + const: 0 + + # Card Detection. + # If none of these properties are supplied, the host native card + # detect will be used. Only one of them should be provided. + + broken-cd: + $ref: /schemas/types.yaml#/definitions/flag + description: + There is no card detection available; polling must be used. + + cd-gpios: + maxItems: 1 + description: + The card detection will be done using the GPIO provided. + + non-removable: + $ref: /schemas/types.yaml#/definitions/flag + description: + Non-removable slot (like eMMC); assume always present. + + # *NOTE* on CD and WP polarity. To use common for all SD/MMC host + # controllers line polarity properties, we have to fix the meaning + # of the "normal" and "inverted" line levels. We choose to follow + # the SDHCI standard, which specifies both those lines as "active + # low." Therefore, using the "cd-inverted" property means, that the + # CD line is active high, i.e. it is high, when a card is + # inserted. Similar logic applies to the "wp-inverted" property. + # + # CD and WP lines can be implemented on the hardware in one of two + # ways: as GPIOs, specified in cd-gpios and wp-gpios properties, or + # as dedicated pins. Polarity of dedicated pins can be specified, + # using *-inverted properties. GPIO polarity can also be specified + # using the GPIO_ACTIVE_LOW flag. This creates an ambiguity in the + # latter case. We choose to use the XOR logic for GPIO CD and WP + # lines. This means, the two properties are "superimposed," for + # example leaving the GPIO_ACTIVE_LOW flag clear and specifying the + # respective *-inverted property property results in a + # double-inversion and actually means the "normal" line polarity is + # in effect. + wp-inverted: + $ref: /schemas/types.yaml#/definitions/flag + description: + The Write Protect line polarity is inverted. + + cd-inverted: + $ref: /schemas/types.yaml#/definitions/flag + description: + The CD line polarity is inverted. + + # Other properties + + bus-width: + description: + Number of data lines. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 4, 8] + default: 1 + + max-frequency: + description: | + Maximum operating frequency of the bus: + - for eMMC, the maximum supported frequency is 200MHz, + - for SD/SDIO cards the SDR104 mode has a max supported + frequency of 208MHz, + - some mmc host controllers do support a max frequency upto + 384MHz. + So, lets keep the maximum supported value here. + + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 400000 + maximum: 384000000 + + disable-wp: + $ref: /schemas/types.yaml#/definitions/flag + description: + When set, no physical write-protect line is present. This + property should only be specified when the controller has a + dedicated write-protect detection logic. If a GPIO is always used + for the write-protect detection logic, it is sufficient to not + specify the wp-gpios property in the absence of a write-protect + line. Not used in combination with eMMC or SDIO. + + wp-gpios: + maxItems: 1 + description: + GPIO to use for the write-protect detection. + + cd-debounce-delay-ms: + description: + Set delay time before detecting card after card insert + interrupt. + + no-1-8-v: + $ref: /schemas/types.yaml#/definitions/flag + description: + When specified, denotes that 1.8V card voltage is not supported + on this system, even if the controller claims it. + + cap-sd-highspeed: + $ref: /schemas/types.yaml#/definitions/flag + description: + SD high-speed timing is supported. + + cap-mmc-highspeed: + $ref: /schemas/types.yaml#/definitions/flag + description: + MMC high-speed timing is supported. + + sd-uhs-sdr12: + $ref: /schemas/types.yaml#/definitions/flag + description: + SD UHS SDR12 speed is supported. + + sd-uhs-sdr25: + $ref: /schemas/types.yaml#/definitions/flag + description: + SD UHS SDR25 speed is supported. + + sd-uhs-sdr50: + $ref: /schemas/types.yaml#/definitions/flag + description: + SD UHS SDR50 speed is supported. + + sd-uhs-sdr104: + $ref: /schemas/types.yaml#/definitions/flag + description: + SD UHS SDR104 speed is supported. + + sd-uhs-ddr50: + $ref: /schemas/types.yaml#/definitions/flag + description: + SD UHS DDR50 speed is supported. + + cap-power-off-card: + $ref: /schemas/types.yaml#/definitions/flag + description: + Powering off the card is safe. + + cap-mmc-hw-reset: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC hardware reset is supported + + cap-sdio-irq: + $ref: /schemas/types.yaml#/definitions/flag + description: + enable SDIO IRQ signalling on this interface + + full-pwr-cycle: + $ref: /schemas/types.yaml#/definitions/flag + description: + Full power cycle of the card is supported. + + full-pwr-cycle-in-suspend: + $ref: /schemas/types.yaml#/definitions/flag + description: + Full power cycle of the card in suspend is supported. + + mmc-ddr-1_2v: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC high-speed DDR mode (1.2V I/O) is supported. + + mmc-ddr-1_8v: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC high-speed DDR mode (1.8V I/O) is supported. + + mmc-ddr-3_3v: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC high-speed DDR mode (3.3V I/O) is supported. + + mmc-hs200-1_2v: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC HS200 mode (1.2V I/O) is supported. + + mmc-hs200-1_8v: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC HS200 mode (1.8V I/O) is supported. + + mmc-hs400-1_2v: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC HS400 mode (1.2V I/O) is supported. + + mmc-hs400-1_8v: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC HS400 mode (1.8V I/O) is supported. + + mmc-hs400-enhanced-strobe: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC HS400 enhanced strobe mode is supported + + no-mmc-hs400: + $ref: /schemas/types.yaml#/definitions/flag + description: + All eMMC HS400 modes are not supported. + + dsr: + description: + Value the card Driver Stage Register (DSR) should be programmed + with. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 0xffff + + no-sdio: + $ref: /schemas/types.yaml#/definitions/flag + description: + Controller is limited to send SDIO commands during + initialization. + + no-sd: + $ref: /schemas/types.yaml#/definitions/flag + description: + Controller is limited to send SD commands during initialization. + + no-mmc: + $ref: /schemas/types.yaml#/definitions/flag + description: + Controller is limited to send MMC commands during + initialization. + + fixed-emmc-driver-type: + description: + For non-removable eMMC, enforce this driver type. The value is + the driver type as specified in the eMMC specification (table + 206 in spec version 5.1) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 4 + + post-power-on-delay-ms: + description: + It was invented for MMC pwrseq-simple which could be referred to + mmc-pwrseq-simple.yaml. But now it\'s reused as a tunable delay + waiting for I/O signalling and card power supply to be stable, + regardless of whether pwrseq-simple is used. Default to 10ms if + no available. + default: 10 + + supports-cqe: + $ref: /schemas/types.yaml#/definitions/flag + description: + The presence of this property indicates that the corresponding + MMC host controller supports HW command queue feature. + + disable-cqe-dcmd: + $ref: /schemas/types.yaml#/definitions/flag + description: + The presence of this property indicates that the MMC + controller\'s command queue engine (CQE) does not support direct + commands (DCMDs). + + keep-power-in-suspend: + $ref: /schemas/types.yaml#/definitions/flag + description: + SDIO only. Preserves card power during a suspend/resume cycle. + + wakeup-source: + $ref: /schemas/types.yaml#/definitions/flag + description: + SDIO only. Enables wake up of host system on SDIO IRQ assertion. + + vmmc-supply: + description: + Supply for the card power + + vqmmc-supply: + description: + Supply for the bus IO line power, such as a level shifter. + If the level shifter is controlled by a GPIO line, this shall + be modeled as a "regulator-fixed" with a GPIO line for + switching the level shifter on/off. + + mmc-pwrseq: + $ref: /schemas/types.yaml#/definitions/phandle + description: + System-on-Chip designs may specify a specific MMC power + sequence. To successfully detect an (e)MMC/SD/SDIO card, that + power sequence must be maintained while initializing the card. + +patternProperties: + "^.*@[0-9]+$": + type: object + description: | + On embedded systems the cards connected to a host may need + additional properties. These can be specified in subnodes to the + host controller node. The subnodes are identified by the + standard \'reg\' property. Which information exactly can be + specified depends on the bindings for the SDIO function driver + for the subnode, as specified by the compatible string. + + properties: + compatible: + description: | + Name of SDIO function following generic names recommended + practice + + reg: + items: + - minimum: 0 + maximum: 7 + description: + Must contain the SDIO function number of the function this + subnode describes. A value of 0 denotes the memory SD + function, values from 1 to 7 denote the SDIO functions. + + required: + - reg + + "^clk-phase-(legacy|sd-hs|mmc-(hs|hs[24]00|ddr52)|uhs-(sdr(12|25|50|104)= |ddr50))$": + $ref: /schemas/types.yaml#/definitions/uint32-array + + minItems: 2 + maxItems: 2 + items: + minimum: 0 + maximum: 359 + description: + Set the clock (phase) delays which are to be configured in the + controller while switching to particular speed mode. These values + are in pair of degrees. + +dependencies: + cd-debounce-delay-ms: [ cd-gpios ] + fixed-emmc-driver-type: [ non-removable ] + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Do= cumentation/devicetree/bindings/mmc/mmc-controller.yaml index 58ae298cd2fc..99c01ce318d3 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml +++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml @@ -18,351 +18,13 @@ description: | (and the corresponding mmcblkN devices) by defining an alias in the /aliases device tree node. =20 +$ref: mmc-controller-common.yaml# + properties: $nodename: pattern: "^mmc(@.*)?$" =20 - "#address-cells": - const: 1 - description: | - The cell is the slot ID if a function subnode is used. - - "#size-cells": - const: 0 - - # Card Detection. - # If none of these properties are supplied, the host native card - # detect will be used. Only one of them should be provided. - - broken-cd: - $ref: /schemas/types.yaml#/definitions/flag - description: - There is no card detection available; polling must be used. - - cd-gpios: - maxItems: 1 - description: - The card detection will be done using the GPIO provided. - - non-removable: - $ref: /schemas/types.yaml#/definitions/flag - description: - Non-removable slot (like eMMC); assume always present. - - # *NOTE* on CD and WP polarity. To use common for all SD/MMC host - # controllers line polarity properties, we have to fix the meaning - # of the "normal" and "inverted" line levels. We choose to follow - # the SDHCI standard, which specifies both those lines as "active - # low." Therefore, using the "cd-inverted" property means, that the - # CD line is active high, i.e. it is high, when a card is - # inserted. Similar logic applies to the "wp-inverted" property. - # - # CD and WP lines can be implemented on the hardware in one of two - # ways: as GPIOs, specified in cd-gpios and wp-gpios properties, or - # as dedicated pins. Polarity of dedicated pins can be specified, - # using *-inverted properties. GPIO polarity can also be specified - # using the GPIO_ACTIVE_LOW flag. This creates an ambiguity in the - # latter case. We choose to use the XOR logic for GPIO CD and WP - # lines. This means, the two properties are "superimposed," for - # example leaving the GPIO_ACTIVE_LOW flag clear and specifying the - # respective *-inverted property property results in a - # double-inversion and actually means the "normal" line polarity is - # in effect. - wp-inverted: - $ref: /schemas/types.yaml#/definitions/flag - description: - The Write Protect line polarity is inverted. - - cd-inverted: - $ref: /schemas/types.yaml#/definitions/flag - description: - The CD line polarity is inverted. - - # Other properties - - bus-width: - description: - Number of data lines. - $ref: /schemas/types.yaml#/definitions/uint32 - enum: [1, 4, 8] - default: 1 - - max-frequency: - description: | - Maximum operating frequency of the bus: - - for eMMC, the maximum supported frequency is 200MHz, - - for SD/SDIO cards the SDR104 mode has a max supported - frequency of 208MHz, - - some mmc host controllers do support a max frequency upto - 384MHz. - So, lets keep the maximum supported value here. - - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 400000 - maximum: 384000000 - - disable-wp: - $ref: /schemas/types.yaml#/definitions/flag - description: - When set, no physical write-protect line is present. This - property should only be specified when the controller has a - dedicated write-protect detection logic. If a GPIO is always used - for the write-protect detection logic, it is sufficient to not - specify the wp-gpios property in the absence of a write-protect - line. Not used in combination with eMMC or SDIO. - - wp-gpios: - maxItems: 1 - description: - GPIO to use for the write-protect detection. - - cd-debounce-delay-ms: - description: - Set delay time before detecting card after card insert - interrupt. - - no-1-8-v: - $ref: /schemas/types.yaml#/definitions/flag - description: - When specified, denotes that 1.8V card voltage is not supported - on this system, even if the controller claims it. - - cap-sd-highspeed: - $ref: /schemas/types.yaml#/definitions/flag - description: - SD high-speed timing is supported. - - cap-mmc-highspeed: - $ref: /schemas/types.yaml#/definitions/flag - description: - MMC high-speed timing is supported. - - sd-uhs-sdr12: - $ref: /schemas/types.yaml#/definitions/flag - description: - SD UHS SDR12 speed is supported. - - sd-uhs-sdr25: - $ref: /schemas/types.yaml#/definitions/flag - description: - SD UHS SDR25 speed is supported. - - sd-uhs-sdr50: - $ref: /schemas/types.yaml#/definitions/flag - description: - SD UHS SDR50 speed is supported. - - sd-uhs-sdr104: - $ref: /schemas/types.yaml#/definitions/flag - description: - SD UHS SDR104 speed is supported. - - sd-uhs-ddr50: - $ref: /schemas/types.yaml#/definitions/flag - description: - SD UHS DDR50 speed is supported. - - cap-power-off-card: - $ref: /schemas/types.yaml#/definitions/flag - description: - Powering off the card is safe. - - cap-mmc-hw-reset: - $ref: /schemas/types.yaml#/definitions/flag - description: - eMMC hardware reset is supported - - cap-sdio-irq: - $ref: /schemas/types.yaml#/definitions/flag - description: - enable SDIO IRQ signalling on this interface - - full-pwr-cycle: - $ref: /schemas/types.yaml#/definitions/flag - description: - Full power cycle of the card is supported. - - full-pwr-cycle-in-suspend: - $ref: /schemas/types.yaml#/definitions/flag - description: - Full power cycle of the card in suspend is supported. - - mmc-ddr-1_2v: - $ref: /schemas/types.yaml#/definitions/flag - description: - eMMC high-speed DDR mode (1.2V I/O) is supported. - - mmc-ddr-1_8v: - $ref: /schemas/types.yaml#/definitions/flag - description: - eMMC high-speed DDR mode (1.8V I/O) is supported. - - mmc-ddr-3_3v: - $ref: /schemas/types.yaml#/definitions/flag - description: - eMMC high-speed DDR mode (3.3V I/O) is supported. - - mmc-hs200-1_2v: - $ref: /schemas/types.yaml#/definitions/flag - description: - eMMC HS200 mode (1.2V I/O) is supported. - - mmc-hs200-1_8v: - $ref: /schemas/types.yaml#/definitions/flag - description: - eMMC HS200 mode (1.8V I/O) is supported. - - mmc-hs400-1_2v: - $ref: /schemas/types.yaml#/definitions/flag - description: - eMMC HS400 mode (1.2V I/O) is supported. - - mmc-hs400-1_8v: - $ref: /schemas/types.yaml#/definitions/flag - description: - eMMC HS400 mode (1.8V I/O) is supported. - - mmc-hs400-enhanced-strobe: - $ref: /schemas/types.yaml#/definitions/flag - description: - eMMC HS400 enhanced strobe mode is supported - - no-mmc-hs400: - $ref: /schemas/types.yaml#/definitions/flag - description: - All eMMC HS400 modes are not supported. - - dsr: - description: - Value the card Driver Stage Register (DSR) should be programmed - with. - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 - maximum: 0xffff - - no-sdio: - $ref: /schemas/types.yaml#/definitions/flag - description: - Controller is limited to send SDIO commands during - initialization. - - no-sd: - $ref: /schemas/types.yaml#/definitions/flag - description: - Controller is limited to send SD commands during initialization. - - no-mmc: - $ref: /schemas/types.yaml#/definitions/flag - description: - Controller is limited to send MMC commands during - initialization. - - fixed-emmc-driver-type: - description: - For non-removable eMMC, enforce this driver type. The value is - the driver type as specified in the eMMC specification (table - 206 in spec version 5.1) - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 - maximum: 4 - - post-power-on-delay-ms: - description: - It was invented for MMC pwrseq-simple which could be referred to - mmc-pwrseq-simple.yaml. But now it\'s reused as a tunable delay - waiting for I/O signalling and card power supply to be stable, - regardless of whether pwrseq-simple is used. Default to 10ms if - no available. - default: 10 - - supports-cqe: - $ref: /schemas/types.yaml#/definitions/flag - description: - The presence of this property indicates that the corresponding - MMC host controller supports HW command queue feature. - - disable-cqe-dcmd: - $ref: /schemas/types.yaml#/definitions/flag - description: - The presence of this property indicates that the MMC - controller\'s command queue engine (CQE) does not support direct - commands (DCMDs). - - keep-power-in-suspend: - $ref: /schemas/types.yaml#/definitions/flag - description: - SDIO only. Preserves card power during a suspend/resume cycle. - - wakeup-source: - $ref: /schemas/types.yaml#/definitions/flag - description: - SDIO only. Enables wake up of host system on SDIO IRQ assertion. - - vmmc-supply: - description: - Supply for the card power - - vqmmc-supply: - description: - Supply for the bus IO line power, such as a level shifter. - If the level shifter is controlled by a GPIO line, this shall - be modeled as a "regulator-fixed" with a GPIO line for - switching the level shifter on/off. - - mmc-pwrseq: - $ref: /schemas/types.yaml#/definitions/phandle - description: - System-on-Chip designs may specify a specific MMC power - sequence. To successfully detect an (e)MMC/SD/SDIO card, that - power sequence must be maintained while initializing the card. - -patternProperties: - "^.*@[0-9]+$": - type: object - description: | - On embedded systems the cards connected to a host may need - additional properties. These can be specified in subnodes to the - host controller node. The subnodes are identified by the - standard \'reg\' property. Which information exactly can be - specified depends on the bindings for the SDIO function driver - for the subnode, as specified by the compatible string. - - properties: - compatible: - description: | - Name of SDIO function following generic names recommended - practice - - reg: - items: - - minimum: 0 - maximum: 7 - description: - Must contain the SDIO function number of the function this - subnode describes. A value of 0 denotes the memory SD - function, values from 1 to 7 denote the SDIO functions. - - required: - - reg - - "^clk-phase-(legacy|sd-hs|mmc-(hs|hs[24]00|ddr52)|uhs-(sdr(12|25|50|104)= |ddr50))$": - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 2 - maxItems: 2 - items: - minimum: 0 - maximum: 359 - description: - Set the clock (phase) delays which are to be configured in the - controller while switching to particular speed mode. These values - are in pair of degrees. - -dependencies: - cd-debounce-delay-ms: [ cd-gpios ] - fixed-emmc-driver-type: [ non-removable ] - -additionalProperties: true +unevaluatedProperties: true =20 examples: - | --=20 2.34.1