From nobody Thu Nov 28 04:38:30 2024 Received: from mail-wm1-f50.google.com (mail-wm1-f50.google.com [209.85.128.50]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 2EB551CACF0 for ; Fri, 4 Oct 2024 21:48:53 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.128.50 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1728078536; cv=none; b=P+HMjml5Pw68+zsDibv//G8MJTrqQPpBSEAeib9aK+rQXYmqrRv5z+e/LOHw5CxwQHju2LWcj9EkyOhFtEpHuwbswe2LRckF1dWV3A3Zuub3AgXwx6ur55RAgIFzr+7CM7t/I8hZIOnqbu87hrTDSIAgIiwIP67wPp7rv8mzeWw= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1728078536; c=relaxed/simple; bh=jVSeA1GybXKEqinyGc0o/mVBc+cGPLYZuh+OWslR0Lg=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=UkTON4Vn2PHD1+beXLBASPZ5e47ZMolC8SDK2amZxT0AOZqR0gCgyMRQgfak80oU2oGEwSliwA50N9e/WmF5ii6ANBskXMhSLU1L9WxMqe6lm90/s9wVdGAtFS6n+ebnwuQ+cV5EA6WdW4R6rqAjncg/EiZjjgdWS41LHAWppg0= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=baylibre.com; spf=pass smtp.mailfrom=baylibre.com; dkim=pass (2048-bit key) header.d=baylibre-com.20230601.gappssmtp.com header.i=@baylibre-com.20230601.gappssmtp.com header.b=nXCKFoPh; arc=none smtp.client-ip=209.85.128.50 Authentication-Results: smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=baylibre.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=baylibre.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=baylibre-com.20230601.gappssmtp.com header.i=@baylibre-com.20230601.gappssmtp.com header.b="nXCKFoPh" Received: by mail-wm1-f50.google.com with SMTP id 5b1f17b1804b1-42cde6b5094so25949695e9.3 for ; Fri, 04 Oct 2024 14:48:52 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=baylibre-com.20230601.gappssmtp.com; s=20230601; t=1728078531; x=1728683331; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=Ws6OvwIpBgzbrhXwN/bI0GwmZw37Oa3ub3+JwbGz+M4=; b=nXCKFoPh+Zk0Y08lyb2vuk4nDlt1ReSas6f2gHvyz9JN3lDiQ7JJRXx+l+za0FPjFb jrJdcWxrHl7SIf553HuN5NSQs/QzmVSGA7diN+RKuU6u0dAuPZqWLI1ITOBhyNoqIQjQ HYXXt0QjffTXelSfUNKtalD0d2rGLSdR+Y3maVxHoQLw+oanE05xpR/2ZZYo2r6dLoB7 Z8NCFX9dhiXpZWy1YkGc+384e7PucbPsrjljYyU7VmC2m6cAmmCv+5q3NpYG2atC+C94 i+yWHXsYlYdjwRTehnwzPgwXld3pBZ8G4MIoLE7EFTThXN8qbBJLYRFTAnuJfmk4Px5M fWYQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1728078531; x=1728683331; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=Ws6OvwIpBgzbrhXwN/bI0GwmZw37Oa3ub3+JwbGz+M4=; b=FWQiOzGl0Om2WjJGfJqHXNkzScGMej4q6YUokQTMPS6xoWAJso4vu/vol0vrmpWHHz lPv5oVn9TqNmHjhDmyg5XlhqRT114jfDBrtmYx6DoMphYgp4ypWed9WUZPH2XcEIJ2E9 7AlAMYdZhrLuXmrl6KY0c7RfBnuyvEHc6Si6LoaLf7ykmAhvgUJD8IMflRUR1jQDwOHS Dm1GIUjb2qprJb/ZWXEvYVS6DCwxznDem2SjoFaMRmWrBHtW0WQnYnAeppk0L7SoRiYD +KDR1FgmMQW7aiTyC3qJZCOQDokpkDGiRTsa878Uo8KeH2Bw/rSQwlwscJ3shO2HZNBT m7hg== X-Forwarded-Encrypted: i=1; AJvYcCU4F5OtWJUlkoKP41vQk+RVYABGkau0YG80yTyns3qJdnaDJm7l0X1ZX1FP0Eydw32Aus5VZMiMfV/MSuw=@vger.kernel.org X-Gm-Message-State: AOJu0YwJ/JzVRH/15fhpv8AQLXKcIHGqeLEW+djqs7Wrn9xurX/+U56K K+UmDGF3CPqa1rHtqBg83qZqlBSXChH5q+W20bBEgG0Zm0UElCBCYF/PrItHnnI= X-Google-Smtp-Source: AGHT+IEp8lVDApG6/0v+gqntIFP0H2r8NnVYzaeUF9YEnuWGMOZ09DXkJeh3ASsOFaRjuQwShIJQWQ== X-Received: by 2002:a05:600c:4e89:b0:42c:b750:19d8 with SMTP id 5b1f17b1804b1-42f85a700ecmr30381585e9.4.1728078531059; Fri, 04 Oct 2024 14:48:51 -0700 (PDT) Received: from [127.0.1.1] (frhb82016ds.ikexpress.com. [185.246.87.17]) by smtp.gmail.com with ESMTPSA id 5b1f17b1804b1-42f86b4ab63sm24680375e9.40.2024.10.04.14.48.49 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 04 Oct 2024 14:48:50 -0700 (PDT) From: Guillaume Stols Date: Fri, 04 Oct 2024 21:48:38 +0000 Subject: [PATCH v3 04/10] Documentation: iio: Document ad7606 driver Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable Message-Id: <20241004-ad7606_add_iio_backend_support-v3-4-38757012ce82@baylibre.com> References: <20241004-ad7606_add_iio_backend_support-v3-0-38757012ce82@baylibre.com> In-Reply-To: <20241004-ad7606_add_iio_backend_support-v3-0-38757012ce82@baylibre.com> To: =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= , Lars-Peter Clausen , Michael Hennerich , Jonathan Cameron , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Greg Kroah-Hartman , "Rafael J. Wysocki" , Jonathan Corbet Cc: linux-pwm@vger.kernel.org, linux-kernel@vger.kernel.org, Michael Hennerich , linux-fbdev@vger.kernel.org, linux-iio@vger.kernel.org, devicetree@vger.kernel.org, linux-doc@vger.kernel.org, aardelean@baylibre.com, dlechner@baylibre.com, Jonathan Cameron , Guillaume Stols X-Mailer: b4 0.14.1 X-Developer-Signature: v=1; a=ed25519-sha256; t=1728078523; l=6859; i=gstols@baylibre.com; s=20240417; h=from:subject:message-id; bh=jVSeA1GybXKEqinyGc0o/mVBc+cGPLYZuh+OWslR0Lg=; b=GaY3nxCWEFM2NgxV+4xbSLb9wBvMIgJLyCLCMlhKHcOFI1tfKQUpHa2pswAJP8b6Kwp3hWoSV OSyZmLuSxlvCFOk2/W62joq0HB/6y8CTGWodgDZ+b5XgM4NR8ZrngxU X-Developer-Key: i=gstols@baylibre.com; a=ed25519; pk=XvMm5WHuV67sGYOJZqIYzXndbaJOlNd8Q6li6vnb4Cs= The Analog Devices Inc. AD7606 (and similar chips) are complex ADCs that will benefit from a detailed driver documentation. This documents the current features supported by the driver. Signed-off-by: Guillaume Stols --- Documentation/iio/ad7606.rst | 145 +++++++++++++++++++++++++++++++++++++++= ++++ Documentation/iio/index.rst | 1 + MAINTAINERS | 1 + 3 files changed, 147 insertions(+) diff --git a/Documentation/iio/ad7606.rst b/Documentation/iio/ad7606.rst new file mode 100644 index 000000000000..a1173708b489 --- /dev/null +++ b/Documentation/iio/ad7606.rst @@ -0,0 +1,145 @@ +.. SPDX-License-Identifier: GPL-2.0-only + +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D +AD7606 driver +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D + +ADC driver for Analog Devices Inc. AD7606 and similar devices. The module = name +is ``ad7606``. + +Supported devices +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D + +The following chips are supported by this driver: + +* `AD7605 `_ +* `AD7606 `_ +* `AD7606B `_ +* `AD7616 `_ + +Supported features +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D + +SPI wiring modes +---------------- + +These ADCs can output data on several SDO lines (1/2/4/8). The driver +currently supports only 1 SDO line. + +Parallel wiring mode +-------------------- + +There is also a parallel interface, with 16 lines (that can be reduced to = 8 in +byte mode). The parallel interface is selected by declaring the device as +platform in the device tree (with no io-backends node defined, see below). + +IIO-backend mode +---------------- + +This mode allows to reach the best sample rates, but it requires an extern= al +hardware (eg HDL or APU) to handle the low level communication. +The backend mode is enabled when through the definition of the "io-backend= s" +property in the device tree. + +The reference configuration for the current implementation of IIO-backend = mode +is the HDL reference provided by ADI: +https://wiki.analog.com/resources/eval/user-guides/ad7606x-fmc/hdl + +This implementation embeds an IIO-backend compatible IP (adi-axi-adc) and = a PWM +connected to the conversion trigger pin. + +.. code-block:: + + +---+ +-------------------------= --- + | | +-------+ |AD76xx + | A | controls | | | + | D |-------------->| PWM |-------------->| cnvst + | 7 | | | | + | 6 | +-------+ | + | 0 | controls +-----------+-----------+ | + | 6 |---------->| | |<--| frstdata + | | | Backend | Backend |<--| busy + | D | | Driver | | | + | R | | | |-->| clk + | I | requests |+---------+| DMA | | + | V |----------->| Buffer ||<---- |<=3D>| DATA + | E | |+---------+| | | + | R | +-----------+-----------+ | + | |-------------------------------------->| reset/configuration gpios + +---+ +-------------------------= ---- + + +Software and hardware modes +--------------------------- + +While all the AD7606/AD7616 series parts can be configured using GPIOs, so= me of +them can be configured using register. + +The chips that support software mode have more values available for config= uring +the device, as well as more settings, and allow to control the range and +calibration per channel. + +The following settings are available per channel in software mode: + - Scale + +Also, there is a broader choice of oversampling ratios in software mode. + +Conversion triggering +--------------------- + +The conversion can be triggered by two distinct ways: + + - A GPIO is connected to the conversion trigger pin, and this GPIO is con= trolled + by the driver directly. In this configuration, the driver sets back the + conversion trigger pin to high as soon as it has read all the conversio= ns. + + - An external source is connected to the conversion trigger pin. In the + current implementation, it must be a PWM. In this configuration, the dr= iver + does not control directly the conversion trigger pin. Instead, it can + control the PWM's frequency. This trigger is enabled only for iio-backe= nd. + +Reference voltage +----------------- + +2 possible reference voltage sources are supported: + + - Internal reference (2.5V) + - External reference (2.5V) + +The source is determined by the device tree. If ``refin-supply`` is presen= t, +then the external reference is used, otherwise the internal reference is u= sed. + +Oversampling +------------ + +This family supports oversampling to improve SNR. +In software mode, the following ratios are available: +1 (oversampling disabled)/2/4/8/16/32/64/128/256. + +Unimplemented features +---------------------- + +- 2/4/8 SDO lines +- CRC indication +- Calibration + +Device buffers +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D + +IIO triggered buffer +-------------------- + +This driver supports IIO triggered buffers, with a "built in" trigger, i.e= the +trigger is allocated and linked by the driver, and a new conversion is tri= ggered +as soon as the samples are transferred, and a timestamp channel is added t= o make +up for the potential jitter induced by the delays in the interrupt handlin= g. + +IIO backend buffer +------------------ + +When IIO backend is used, the trigger is not needed, and the sample rate is +considered as stable. There is no timestamp channel. The communication is +delegated to an external logic, called a backend, and the backend's driver +handles the buffer. When this mode is enabled, the driver cannot control t= he +conversion pin, because the busy pin is bound to the backend. + diff --git a/Documentation/iio/index.rst b/Documentation/iio/index.rst index dfcf9618568a..88bc36326b74 100644 --- a/Documentation/iio/index.rst +++ b/Documentation/iio/index.rst @@ -21,6 +21,7 @@ Industrial I/O Kernel Drivers ad4000 ad4695 ad7380 + ad7606 ad7944 adis16475 adis16480 diff --git a/MAINTAINERS b/MAINTAINERS index bcdf43f37660..45c33d1a4403 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1561,6 +1561,7 @@ F: Documentation/ABI/testing/sysfs-bus-iio-frequency-= adf4350 F: Documentation/devicetree/bindings/iio/*/adi,* F: Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml F: Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml +F: Documentation/iio/ad7606.rst F: drivers/iio/*/ad* F: drivers/iio/adc/ltc249* F: drivers/iio/amplifiers/hmc425a.c --=20 2.34.1