From nobody Fri Nov 29 17:37:07 2024 Received: from gate2.alliedtelesis.co.nz (gate2.alliedtelesis.co.nz [202.36.163.20]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 121081925A6 for ; Tue, 17 Sep 2024 23:29:44 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=202.36.163.20 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1726615789; cv=none; b=cW1oX+57IKm1r4ZWeBf+6uc3OWjiviUxP0iAPhWh6LwBwljZsrPwEnoudxGnzgIhCnsbjhckzh921PRKw98BkYiVWxCzLxTo9ne9FpHaEfr+lq58StZreteCC6rDB2xm3BQdtmHHbGkpcGNk1ZWy5JmHB9aQhkFsAVVroz3skwI= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1726615789; c=relaxed/simple; bh=PWXsu7hmdKyFryLbKF2H2hHNrjY4SabXvnkj3ZlXos0=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=VPf6ez8O/jueDCA05jlUL9Zg20PRFHjdpUjtX8ZZMX15XtTtZzveuKX7vM1+C2c+0F2toBnQwRK1IO89krqWVIs6Fq1pj29Y7bPoaeGtMVN2aBdBWkni1JegtX91Y56kiWhmtjHpoR8MRPmnheHSh6qZkzbBUp2Td/toyu2K6nY= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=alliedtelesis.co.nz; spf=pass smtp.mailfrom=alliedtelesis.co.nz; dkim=pass (2048-bit key) header.d=alliedtelesis.co.nz header.i=@alliedtelesis.co.nz header.b=i2iHtJ/R; arc=none smtp.client-ip=202.36.163.20 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=alliedtelesis.co.nz Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=alliedtelesis.co.nz Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=alliedtelesis.co.nz header.i=@alliedtelesis.co.nz header.b="i2iHtJ/R" Received: from svr-chch-seg1.atlnz.lc (mmarshal3.atlnz.lc [10.32.18.43]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256) (Client did not present a certificate) by gate2.alliedtelesis.co.nz (Postfix) with ESMTPS id 37F312C04C6; Wed, 18 Sep 2024 11:29:37 +1200 (NZST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=alliedtelesis.co.nz; s=mail181024; t=1726615777; bh=sK0OBjCO0TUSOtd9gJAG5cm4pxzayS0oqY9Ctba8wX0=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=i2iHtJ/RUCePhTNHQrdP9ONcod08dRjbzksNzYh14ydqZyrmfbcu5i/4wazQgkgGT ynHs4rNvsZBpbvWIcIZprwoG9Rqp+jNy9qAXVWJYAsq5I727IH0ZuNfqTM1g0UWeqq jp6AdpU55ZLSiG9ptarqai0iaC9Yl91qbmkoqVIljHkUtAC6V7NhbAzKwLQDiuxf4N 71dZr/VzsVUlSLA5nb5yoyMZCe4ukr0s3U1quESecfx5QMMfxiG0JTpIgWB4BfrD/Y 3Xj/8U2YBKJ0dC4be02cuNrf7/uVl2WGfJ6aPuWCzLBNjFIXOUwIVoYI2Mrw9noee5 Jb+jabBHav+rg== Received: from pat.atlnz.lc (Not Verified[10.32.16.33]) by svr-chch-seg1.atlnz.lc with Trustwave SEG (v8,2,6,11305) id ; Wed, 18 Sep 2024 11:29:36 +1200 Received: from chrisp-dl.ws.atlnz.lc (chrisp-dl.ws.atlnz.lc [10.33.22.30]) by pat.atlnz.lc (Postfix) with ESMTP id 7EA7913EE84; Wed, 18 Sep 2024 11:29:36 +1200 (NZST) Received: by chrisp-dl.ws.atlnz.lc (Postfix, from userid 1030) id 7BA6C280347; Wed, 18 Sep 2024 11:29:36 +1200 (NZST) From: Chris Packham To: andi.shyti@kernel.org, robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org, tsbogend@alpha.franken.de Cc: linux-i2c@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-mips@vger.kernel.org, Chris Packham Subject: [PATCH 2/5] i2c: Add driver for the RTL9300 I2C controller Date: Wed, 18 Sep 2024 11:29:29 +1200 Message-ID: <20240917232932.3641992-3-chris.packham@alliedtelesis.co.nz> X-Mailer: git-send-email 2.46.1 In-Reply-To: <20240917232932.3641992-1-chris.packham@alliedtelesis.co.nz> References: <20240917232932.3641992-1-chris.packham@alliedtelesis.co.nz> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable X-SEG-SpamProfiler-Analysis: v=2.4 cv=Id0kWnqa c=1 sm=1 tr=0 ts=66ea10e0 a=KLBiSEs5mFS1a/PbTCJxuA==:117 a=EaEq8P2WXUwA:10 a=jdP34snFAAAA:8 a=VwQbUJbxAAAA:8 a=UgJECxHJAAAA:8 a=wkefLfiLUHRAPrDp2TIA:9 a=3ZKOabzyN94A:10 a=jlphF6vWLdwq7oh3TaWq:22 a=-El7cUbtino8hM1DCn8D:22 X-SEG-SpamProfiler-Score: 0 x-atlnz-ls: pat Content-Type: text/plain; charset="utf-8" Add support for the I2C controller on the RTL9300 SoC. This is based on the openwrt implementation[1] but cleaned up to make use of the regmap APIs. [1] - https://git.openwrt.org/?p=3Dopenwrt/openwrt.git;a=3Dblob;f=3Dtarget/= linux/realtek/files-5.15/drivers/i2c/busses/i2c-rtl9300.c Signed-off-by: Chris Packham --- MAINTAINERS | 1 + drivers/i2c/busses/Kconfig | 10 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-rtl9300.c | 377 +++++++++++++++++++++++++++++++ 4 files changed, 389 insertions(+) create mode 100644 drivers/i2c/busses/i2c-rtl9300.c diff --git a/MAINTAINERS b/MAINTAINERS index ccb1125444f4..9e123e9839a5 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -19892,6 +19892,7 @@ M: Chris Packham L: linux-i2c@vger.kernel.org S: Maintained F: Documentation/devicetree/bindings/i2c/realtek,rtl9300-i2c.yaml +F: drivers/i2c/busses/i2c-rtl9300.c =20 RTRS TRANSPORT DRIVERS M: Md. Haris Iqbal diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index a22f9125322a..927b583002c7 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -1041,6 +1041,16 @@ config I2C_RK3X This driver can also be built as a module. If so, the module will be called i2c-rk3x. =20 +config I2C_RTL9300 + tristate "Realtek RTL9300 I2C controller" + depends on MACH_REALTEK_RTL || COMPILE_TEST + help + Say Y here to include support for the I2C controller in Realtek + RTL9300 SoCs. + + This driver can also be built as a module. If so, the module will + be called i2c-rtl9300. + config I2C_RZV2M tristate "Renesas RZ/V2M adapter" depends on ARCH_RENESAS || COMPILE_TEST diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 78d0561339e5..ac2f9f22803c 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -102,6 +102,7 @@ obj-$(CONFIG_I2C_QCOM_GENI) +=3D i2c-qcom-geni.o obj-$(CONFIG_I2C_QUP) +=3D i2c-qup.o obj-$(CONFIG_I2C_RIIC) +=3D i2c-riic.o obj-$(CONFIG_I2C_RK3X) +=3D i2c-rk3x.o +obj-$(CONFIG_I2C_RTL9300) +=3D i2c-rtl9300.o obj-$(CONFIG_I2C_RZV2M) +=3D i2c-rzv2m.o obj-$(CONFIG_I2C_S3C2410) +=3D i2c-s3c2410.o obj-$(CONFIG_I2C_SH7760) +=3D i2c-sh7760.o diff --git a/drivers/i2c/busses/i2c-rtl9300.c b/drivers/i2c/busses/i2c-rtl9= 300.c new file mode 100644 index 000000000000..f16e9b6343bf --- /dev/null +++ b/drivers/i2c/busses/i2c-rtl9300.c @@ -0,0 +1,377 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include +#include +#include +#include +#include +#include + +struct rtl9300_i2c { + struct regmap *regmap; + struct device *dev; + struct i2c_adapter adap; + u32 i2c_mst_ofs; + u32 i2c_mst_glb_ofs; + u8 bus_freq; + u8 sda_pin; +}; + +#define I2C_MST_CTRL1 0x0 +#define MEM_ADDR_OFS 8 +#define MEM_ADDR_MASK 0xffffff +#define SDA_OUT_SEL_OFS 4 +#define SDA_OUT_SEL_MASK 0x7 +#define GPIO_SCL_SEL BIT(3) +#define RWOP BIT(2) +#define I2C_FAIL BIT(1) +#define I2C_TRIG BIT(0) +#define I2C_MST_CTRL2 0x4 +#define RD_MODE BIT(15) +#define DEV_ADDR_OFS 8 +#define DEV_ADDR_MASK 0x7f +#define DATA_WIDTH_OFS 4 +#define DATA_WIDTH_MASK 0xf +#define MEM_ADDR_WIDTH_OFS 2 +#define MEM_ADDR_WIDTH_MASK 0x3 +#define SCL_FREQ_OFS 0 +#define SCL_FREQ_MASK 0x3 +#define I2C_MST_DATA_WORD0 0x8 +#define I2C_MST_DATA_WORD1 0xc +#define I2C_MST_DATA_WORD2 0x10 +#define I2C_MST_DATA_WORD3 0x14 + +#define RTL9300_I2C_STD_FREQ 0 +#define RTL9300_I2C_FAST_FREQ 1 + +DEFINE_MUTEX(i2c_lock); + +static int rtl9300_i2c_reg_addr_set(struct rtl9300_i2c *i2c, u32 reg, u16 = len) +{ + u32 val, mask; + int ret; + + val =3D len << MEM_ADDR_WIDTH_OFS; + mask =3D MEM_ADDR_WIDTH_MASK << MEM_ADDR_WIDTH_OFS; + + ret =3D regmap_update_bits(i2c->regmap, i2c->i2c_mst_ofs + I2C_MST_CTRL2,= mask, val); + if (ret) + return ret; + + val =3D reg << MEM_ADDR_OFS; + mask =3D MEM_ADDR_MASK << MEM_ADDR_OFS; + + ret =3D regmap_update_bits(i2c->regmap, i2c->i2c_mst_ofs + I2C_MST_CTRL1,= mask, val); + if (ret) + return ret; + + return 0; +} + +static int rtl9300_i2c_config_io(struct rtl9300_i2c *i2c, u8 sda_pin) +{ + int ret; + + ret =3D regmap_update_bits(i2c->regmap, i2c->i2c_mst_glb_ofs, BIT(sda_pin= ), BIT(sda_pin)); + if (ret) + return ret; + + ret =3D regmap_update_bits(i2c->regmap, i2c->i2c_mst_ofs + I2C_MST_CTRL1, + (SDA_OUT_SEL_MASK << SDA_OUT_SEL_OFS) | GPIO_SCL_SEL, + (sda_pin << SDA_OUT_SEL_OFS) | GPIO_SCL_SEL); + if (ret) + return ret; + + return 0; +} + +static int rtl9300_i2c_config_xfer(struct rtl9300_i2c *i2c, u16 addr, u16 = len) +{ + u32 val, mask; + + val =3D i2c->bus_freq << SCL_FREQ_OFS; + mask =3D SCL_FREQ_MASK << SCL_FREQ_OFS; + + val |=3D addr << DEV_ADDR_OFS; + mask |=3D DEV_ADDR_MASK << DEV_ADDR_OFS; + + val |=3D ((len - 1) & 0xf) << DATA_WIDTH_OFS; + mask |=3D DATA_WIDTH_MASK << DATA_WIDTH_OFS; + + mask |=3D RD_MODE; + + return regmap_update_bits(i2c->regmap, i2c->i2c_mst_ofs + I2C_MST_CTRL2, = mask, val); +} + +static int rtl9300_i2c_read(struct rtl9300_i2c *i2c, u8 *buf, int len) +{ + u32 vals[4] =3D {}; + int i, ret; + + if (len > 16) + return -EIO; + + ret =3D regmap_bulk_read(i2c->regmap, i2c->i2c_mst_ofs + I2C_MST_DATA_WOR= D0, + vals, ARRAY_SIZE(vals)); + if (ret) + return ret; + + for (i =3D 0; i < len; i++) { + buf[i] =3D vals[i/4] & 0xff; + vals[i/4] >>=3D 8; + } + + return len; +} + +static int rtl9300_i2c_write(struct rtl9300_i2c *i2c, u8 *buf, int len) +{ + u32 vals[4] =3D {}; + int i, ret; + + if (len > 16) + return -EIO; + + for (i =3D 0; i < len; i++) { + if (i % 4 =3D=3D 0) + vals[i/4] =3D 0; + vals[i/4] <<=3D 8; + vals[i/4] |=3D buf[i]; + } + + ret =3D regmap_bulk_write(i2c->regmap, i2c->i2c_mst_ofs + I2C_MST_DATA_WO= RD0, + vals, ARRAY_SIZE(vals)); + if (ret) + return ret; + + return len; +} + +static int rtl9300_i2c_writel(struct rtl9300_i2c *i2c, u32 data) +{ + int ret; + + ret =3D regmap_write(i2c->regmap, i2c->i2c_mst_ofs + I2C_MST_DATA_WORD0, = data); + if (ret) + return ret; + + return 0; +} + +static int rtl9300_i2c_execute_xfer(struct rtl9300_i2c *i2c, char read_wri= te, + int size, union i2c_smbus_data *data, int len) +{ + u32 val, mask; + int ret; + + if (read_write =3D=3D I2C_SMBUS_READ) + val =3D 0; + else + val =3D RWOP; + mask =3D RWOP; + + val |=3D I2C_TRIG; + mask |=3D I2C_TRIG; + + ret =3D regmap_update_bits(i2c->regmap, i2c->i2c_mst_ofs + I2C_MST_CTRL1,= mask, val); + if (ret) + return ret; + + ret =3D regmap_read_poll_timeout(i2c->regmap, i2c->i2c_mst_ofs + I2C_MST_= CTRL1, + val, !(val & I2C_TRIG), 100, 2000); + if (ret) + return ret; + + if (val & I2C_FAIL) + return -EIO; + + if (read_write =3D=3D I2C_SMBUS_READ) { + if (size =3D=3D I2C_SMBUS_BYTE || size =3D=3D I2C_SMBUS_BYTE_DATA) { + ret =3D regmap_read(i2c->regmap, i2c->i2c_mst_ofs + I2C_MST_DATA_WORD0,= &val); + if (ret) + return ret; + data->byte =3D val & 0xff; + } else if (size =3D=3D I2C_SMBUS_WORD_DATA) { + ret =3D regmap_read(i2c->regmap, i2c->i2c_mst_ofs + I2C_MST_DATA_WORD0,= &val); + if (ret) + return ret; + data->word =3D val & 0xffff; + } else { + rtl9300_i2c_read(i2c, &data->block[0], len); + } + } + + return 0; +} + +static int rtl9300_i2c_smbus_xfer(struct i2c_adapter *adap, u16 addr, + unsigned short flags, char read_write, + u8 command, int size, union i2c_smbus_data *data) +{ + struct rtl9300_i2c *i2c =3D i2c_get_adapdata(adap); + int len =3D 0, ret; + + mutex_lock(&i2c_lock); + switch (size) { + case I2C_SMBUS_QUICK: + rtl9300_i2c_config_xfer(i2c, addr, 0); + rtl9300_i2c_reg_addr_set(i2c, 0, 0); + break; + + case I2C_SMBUS_BYTE: + if (read_write =3D=3D I2C_SMBUS_WRITE) { + rtl9300_i2c_config_xfer(i2c, addr, 0); + rtl9300_i2c_reg_addr_set(i2c, command, 1); + } else { + rtl9300_i2c_config_xfer(i2c, addr, 1); + rtl9300_i2c_reg_addr_set(i2c, 0, 0); + } + break; + + case I2C_SMBUS_BYTE_DATA: + rtl9300_i2c_reg_addr_set(i2c, command, 1); + rtl9300_i2c_config_xfer(i2c, addr, 1); + if (read_write =3D=3D I2C_SMBUS_WRITE) + rtl9300_i2c_writel(i2c, data->byte); + break; + + case I2C_SMBUS_WORD_DATA: + rtl9300_i2c_reg_addr_set(i2c, command, 1); + rtl9300_i2c_config_xfer(i2c, addr, 2); + if (read_write =3D=3D I2C_SMBUS_WRITE) + rtl9300_i2c_writel(i2c, data->word); + break; + + case I2C_SMBUS_BLOCK_DATA: + rtl9300_i2c_reg_addr_set(i2c, command, 1); + rtl9300_i2c_config_xfer(i2c, addr, data->block[0]); + if (read_write =3D=3D I2C_SMBUS_WRITE) + rtl9300_i2c_write(i2c, &data->block[1], data->block[0]); + len =3D data->block[0]; + break; + + default: + dev_warn(&adap->dev, "Unsupported transaction %d\n", size); + ret =3D -EOPNOTSUPP; + goto out_unlock; + } + + ret =3D rtl9300_i2c_execute_xfer(i2c, read_write, size, data, len); + +out_unlock: + mutex_unlock(&i2c_lock); + + return ret; +} + +static u32 rtl9300_i2c_func(struct i2c_adapter *a) +{ + return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_BLOCK_DATA; +} + +static const struct i2c_algorithm rtl9300_i2c_algo =3D { + .smbus_xfer =3D rtl9300_i2c_smbus_xfer, + .functionality =3D rtl9300_i2c_func, +}; + +struct i2c_adapter_quirks rtl9300_i2c_quirks =3D { + .flags =3D I2C_AQ_NO_CLK_STRETCH, + .max_read_len =3D 16, + .max_write_len =3D 16, +}; + +static int rtl9300_i2c_probe(struct platform_device *pdev) +{ + struct device *dev =3D &pdev->dev; + struct rtl9300_i2c *i2c; + struct i2c_adapter *adap; + u32 clock_freq, sda_pin; + int ret; + + i2c =3D devm_kzalloc(dev, sizeof(*i2c), GFP_KERNEL); + if (!i2c) + return -ENOMEM; + + i2c->regmap =3D syscon_node_to_regmap(dev->parent->of_node); + if (IS_ERR(i2c->regmap)) + return PTR_ERR(i2c->regmap); + i2c->dev =3D dev; + + ret =3D device_property_read_u32(dev, "realtek,control-offset", &i2c->i2c= _mst_ofs); + if (ret) + return ret; + + ret =3D device_property_read_u32(dev, "realtek,global-control-offset", &i= 2c->i2c_mst_glb_ofs); + if (ret) + return ret; + + ret =3D device_property_read_u32(dev, "clock-frequency", &clock_freq); + if (ret) + clock_freq =3D I2C_MAX_STANDARD_MODE_FREQ; + + switch (clock_freq) { + case I2C_MAX_STANDARD_MODE_FREQ: + i2c->bus_freq =3D RTL9300_I2C_STD_FREQ; + break; + + case I2C_MAX_FAST_MODE_FREQ: + i2c->bus_freq =3D RTL9300_I2C_FAST_FREQ; + break; + default: + dev_warn(i2c->dev, "clock-frequency %d not supported\n", clock_freq); + return -EINVAL; + } + + ret =3D device_property_read_u32(dev, "realtek,sda-pin", &sda_pin); + if (ret) + sda_pin =3D 0; + i2c->sda_pin =3D sda_pin; + + adap =3D &i2c->adap; + adap->owner =3D THIS_MODULE; + adap->algo =3D &rtl9300_i2c_algo; + adap->quirks =3D &rtl9300_i2c_quirks; + adap->retries =3D 3; + adap->dev.parent =3D dev; + i2c_set_adapdata(adap, i2c); + adap->dev.of_node =3D dev->of_node; + strscpy(adap->name, dev_name(dev), sizeof(adap->name)); + + platform_set_drvdata(pdev, i2c); + + ret =3D rtl9300_i2c_config_io(i2c, i2c->sda_pin); + if (ret) + return ret; + + return i2c_add_adapter(adap); +} + +static void rtl9300_i2c_remove(struct platform_device *pdev) +{ + struct rtl9300_i2c *i2c =3D platform_get_drvdata(pdev); + + i2c_del_adapter(&i2c->adap); +} + +static const struct of_device_id i2c_rtl9300_dt_ids[] =3D { + { .compatible =3D "realtek,rtl9300-i2c" }, + {} +}; +MODULE_DEVICE_TABLE(of, i2c_rtl9300_dt_ids); + +static struct platform_driver rtl9300_i2c_driver =3D { + .probe =3D rtl9300_i2c_probe, + .remove =3D rtl9300_i2c_remove, + .driver =3D { + .name =3D "i2c-rtl9300", + .of_match_table =3D i2c_rtl9300_dt_ids, + }, +}; + +module_platform_driver(rtl9300_i2c_driver); + +MODULE_DESCRIPTION("RTL9300 I2C controller driver"); +MODULE_LICENSE("GPL"); + --=20 2.46.1