Series comparison

The qcom-rng driver supports both ACPI and device tree based systems.
ACPI support was broken when the hw_random interface support was added.
Let's go ahead and fix this by adding a check for has_acpi_companion().

This fix was boot tested on a Qualcomm Amberwing server.

Fixes: f29cd5bb64c2 ("crypto: qcom-rng - Add hw_random interface support")
Reported-by: Ernesto A. Fern\ufffd\ufffdndez <ernesto.mnd.fernandez@gmail.com>
Closes: https://lore.kernel.org/linux-arm-msm/20240828184019.GA21181@eaf/
Cc: stable@vger.kernel.org
Signed-off-by: Brian Masney <bmasney@redhat.com>
---
Note: I looked at updating the struct qcom_rng_acpi_match to have
driver_data point to &qcom_prng_ee_of_data, however that won't work
since struct acpi_device_id has a driver_data member of type
kernel_ulong_t. struct of_device_id has the data member set to
type const void *. As I get available time, I'll look to see if
it's possible to migrate struct acpi_device_id.driver_data from
a kernel_ulong_t to a const void * to match what's done in
struct of_device_id. That will allow removing the has_acpi_companion()
check in the future. I suspect that change is not going to be trivial
though.

drivers/crypto/qcom-rng.c | 35 +++++++++++++++++++----------------
 1 file changed, 19 insertions(+), 16 deletions(-)

diff --git a/drivers/crypto/qcom-rng.c b/drivers/crypto/qcom-rng.c
index XXXXXXX..XXXXXXX 100644
--- a/drivers/crypto/qcom-rng.c
+++ b/drivers/crypto/qcom-rng.c
@@ -XXX,XX +XXX,XX @@ static struct rng_alg qcom_rng_alg = {
 	}
 };
 
+static struct qcom_rng_of_data qcom_prng_of_data = {
+	.skip_init = false,
+	.hwrng_support = false,
+};
+
+static struct qcom_rng_of_data qcom_prng_ee_of_data = {
+	.skip_init = true,
+	.hwrng_support = false,
+};
+
+static struct qcom_rng_of_data qcom_trng_of_data = {
+	.skip_init = true,
+	.hwrng_support = true,
+};
+
 static int qcom_rng_probe(struct platform_device *pdev)
 {
 	struct qcom_rng *rng;
@@ -XXX,XX +XXX,XX @@ static int qcom_rng_probe(struct platform_device *pdev)
 	if (IS_ERR(rng->clk))
 		return PTR_ERR(rng->clk);
 
-	rng->of_data = (struct qcom_rng_of_data *)of_device_get_match_data(&pdev->dev);
+	if (has_acpi_companion(&pdev->dev))
+		rng->of_data = &qcom_prng_ee_of_data;
+	else
+		rng->of_data = (struct qcom_rng_of_data *)of_device_get_match_data(&pdev->dev);
 
 	qcom_rng_dev = rng;
 	ret = crypto_register_rng(&qcom_rng_alg);
@@ -XXX,XX +XXX,XX @@ static void qcom_rng_remove(struct platform_device *pdev)
 	qcom_rng_dev = NULL;
 }
 
-static struct qcom_rng_of_data qcom_prng_of_data = {
-	.skip_init = false,
-	.hwrng_support = false,
-};
-
-static struct qcom_rng_of_data qcom_prng_ee_of_data = {
-	.skip_init = true,
-	.hwrng_support = false,
-};
-
-static struct qcom_rng_of_data qcom_trng_of_data = {
-	.skip_init = true,
-	.hwrng_support = true,
-};
-
 static const struct acpi_device_id __maybe_unused qcom_rng_acpi_match[] = {
 	{ .id = "QCOM8160", .driver_data = 1 },
 	{}
-- 
2.46.0

The qcom-rng driver supports both ACPI and device tree based systems.
Let's rename all instances of *_of_data to *_match_data so that it's
not implied that this driver only supports device tree.

Signed-off-by: Brian Masney <bmasney@redhat.com>
---
 drivers/crypto/qcom-rng.c | 25 +++++++++++++------------
 1 file changed, 13 insertions(+), 12 deletions(-)

diff --git a/drivers/crypto/qcom-rng.c b/drivers/crypto/qcom-rng.c
index XXXXXXX..XXXXXXX 100644
--- a/drivers/crypto/qcom-rng.c
+++ b/drivers/crypto/qcom-rng.c
@@ -XXX,XX +XXX,XX @@ struct qcom_rng {
 	void __iomem *base;
 	struct clk *clk;
 	struct hwrng hwrng;
-	struct qcom_rng_of_data *of_data;
+	struct qcom_rng_match_data *match_data;
 };
 
 struct qcom_rng_ctx {
 	struct qcom_rng *rng;
 };
 
-struct qcom_rng_of_data {
+struct qcom_rng_match_data {
 	bool skip_init;
 	bool hwrng_support;
 };
@@ -XXX,XX +XXX,XX @@ static int qcom_rng_init(struct crypto_tfm *tfm)
 
 	ctx->rng = qcom_rng_dev;
 
-	if (!ctx->rng->of_data->skip_init)
+	if (!ctx->rng->match_data->skip_init)
 		return qcom_rng_enable(ctx->rng);
 
 	return 0;
@@ -XXX,XX +XXX,XX @@ static struct rng_alg qcom_rng_alg = {
 	}
 };
 
-static struct qcom_rng_of_data qcom_prng_of_data = {
+static struct qcom_rng_match_data qcom_prng_match_data = {
 	.skip_init = false,
 	.hwrng_support = false,
 };
 
-static struct qcom_rng_of_data qcom_prng_ee_of_data = {
+static struct qcom_rng_match_data qcom_prng_ee_match_data = {
 	.skip_init = true,
 	.hwrng_support = false,
 };
 
-static struct qcom_rng_of_data qcom_trng_of_data = {
+static struct qcom_rng_match_data qcom_trng_match_data = {
 	.skip_init = true,
 	.hwrng_support = true,
 };
@@ -XXX,XX +XXX,XX @@ static int qcom_rng_probe(struct platform_device *pdev)
 		return PTR_ERR(rng->clk);
 
 	if (has_acpi_companion(&pdev->dev))
-		rng->of_data = &qcom_prng_ee_of_data;
+		rng->match_data = &qcom_prng_ee_match_data;
 	else
-		rng->of_data = (struct qcom_rng_of_data *)of_device_get_match_data(&pdev->dev);
+		rng->match_data =
+			(struct qcom_rng_match_data *)of_device_get_match_data(&pdev->dev);
 
 	qcom_rng_dev = rng;
 	ret = crypto_register_rng(&qcom_rng_alg);
@@ -XXX,XX +XXX,XX @@ static int qcom_rng_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	if (rng->of_data->hwrng_support) {
+	if (rng->match_data->hwrng_support) {
 		rng->hwrng.name = "qcom_hwrng";
 		rng->hwrng.read = qcom_hwrng_read;
 		rng->hwrng.quality = QCOM_TRNG_QUALITY;
@@ -XXX,XX +XXX,XX @@ static const struct acpi_device_id __maybe_unused qcom_rng_acpi_match[] = {
 MODULE_DEVICE_TABLE(acpi, qcom_rng_acpi_match);
 
 static const struct of_device_id __maybe_unused qcom_rng_of_match[] = {
-	{ .compatible = "qcom,prng", .data = &qcom_prng_of_data },
-	{ .compatible = "qcom,prng-ee", .data = &qcom_prng_ee_of_data },
-	{ .compatible = "qcom,trng", .data = &qcom_trng_of_data },
+	{ .compatible = "qcom,prng", .data = &qcom_prng_match_data },
+	{ .compatible = "qcom,prng-ee", .data = &qcom_prng_ee_match_data },
+	{ .compatible = "qcom,trng", .data = &qcom_trng_match_data },
 	{}
 };
 MODULE_DEVICE_TABLE(of, qcom_rng_of_match);
-- 
2.46.0

The qcom-rng driver supports both ACPI and device tree-based systems.
ACPI support was broken when the hw_random interface support was added.
Let's go ahead and fix this by adding the appropriate driver data to the
ACPI match table, and change the of_device_get_match_data() call to
device_get_match_data() so that it will also work on ACPI-based systems.

This fix was boot tested on a Qualcomm Amberwing server (ACPI based) and
on a Qualcomm SA8775p Automotive Development Board (DT based). I also
verified that qcom-rng shows up in /proc/crypto on both systems.

Fixes: f29cd5bb64c2 ("crypto: qcom-rng - Add hw_random interface support")
Reported-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Closes: https://lore.kernel.org/linux-arm-msm/20240828184019.GA21181@eaf/
Cc: stable@vger.kernel.org
Signed-off-by: Brian Masney <bmasney@redhat.com>
---
 drivers/crypto/qcom-rng.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/crypto/qcom-rng.c b/drivers/crypto/qcom-rng.c
index XXXXXXX..XXXXXXX 100644
--- a/drivers/crypto/qcom-rng.c
+++ b/drivers/crypto/qcom-rng.c
@@ -XXX,XX +XXX,XX @@ static int qcom_rng_probe(struct platform_device *pdev)
 	if (IS_ERR(rng->clk))
 		return PTR_ERR(rng->clk);
 
-	rng->of_data = (struct qcom_rng_of_data *)of_device_get_match_data(&pdev->dev);
+	rng->of_data = (struct qcom_rng_of_data *)device_get_match_data(&pdev->dev);
 
 	qcom_rng_dev = rng;
 	ret = crypto_register_rng(&qcom_rng_alg);
@@ -XXX,XX +XXX,XX @@ static struct qcom_rng_of_data qcom_trng_of_data = {
 };
 
 static const struct acpi_device_id __maybe_unused qcom_rng_acpi_match[] = {
-	{ .id = "QCOM8160", .driver_data = 1 },
+	{ .id = "QCOM8160", .driver_data = (kernel_ulong_t)&qcom_prng_ee_of_data },
 	{}
 };
 MODULE_DEVICE_TABLE(acpi, qcom_rng_acpi_match);
-- 
2.46.0

The qcom-rng driver supports both ACPI and device tree based systems.
Let's rename all instances of *of_data to *match_data so that it's
not implied that this driver only supports device tree-based systems.

Signed-off-by: Brian Masney <bmasney@redhat.com>
---
 drivers/crypto/qcom-rng.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/crypto/qcom-rng.c b/drivers/crypto/qcom-rng.c
index XXXXXXX..XXXXXXX 100644
--- a/drivers/crypto/qcom-rng.c
+++ b/drivers/crypto/qcom-rng.c
@@ -XXX,XX +XXX,XX @@ struct qcom_rng {
 	void __iomem *base;
 	struct clk *clk;
 	struct hwrng hwrng;
-	struct qcom_rng_of_data *of_data;
+	struct qcom_rng_match_data *match_data;
 };
 
 struct qcom_rng_ctx {
 	struct qcom_rng *rng;
 };
 
-struct qcom_rng_of_data {
+struct qcom_rng_match_data {
 	bool skip_init;
 	bool hwrng_support;
 };
@@ -XXX,XX +XXX,XX @@ static int qcom_rng_init(struct crypto_tfm *tfm)
 
 	ctx->rng = qcom_rng_dev;
 
-	if (!ctx->rng->of_data->skip_init)
+	if (!ctx->rng->match_data->skip_init)
 		return qcom_rng_enable(ctx->rng);
 
 	return 0;
@@ -XXX,XX +XXX,XX @@ static int qcom_rng_probe(struct platform_device *pdev)
 	if (IS_ERR(rng->clk))
 		return PTR_ERR(rng->clk);
 
-	rng->of_data = (struct qcom_rng_of_data *)device_get_match_data(&pdev->dev);
+	rng->match_data = (struct qcom_rng_match_data *)device_get_match_data(&pdev->dev);
 
 	qcom_rng_dev = rng;
 	ret = crypto_register_rng(&qcom_rng_alg);
@@ -XXX,XX +XXX,XX @@ static int qcom_rng_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	if (rng->of_data->hwrng_support) {
+	if (rng->match_data->hwrng_support) {
 		rng->hwrng.name = "qcom_hwrng";
 		rng->hwrng.read = qcom_hwrng_read;
 		rng->hwrng.quality = QCOM_TRNG_QUALITY;
@@ -XXX,XX +XXX,XX @@ static void qcom_rng_remove(struct platform_device *pdev)
 	qcom_rng_dev = NULL;
 }
 
-static struct qcom_rng_of_data qcom_prng_of_data = {
+static struct qcom_rng_match_data qcom_prng_match_data = {
 	.skip_init = false,
 	.hwrng_support = false,
 };
 
-static struct qcom_rng_of_data qcom_prng_ee_of_data = {
+static struct qcom_rng_match_data qcom_prng_ee_match_data = {
 	.skip_init = true,
 	.hwrng_support = false,
 };
 
-static struct qcom_rng_of_data qcom_trng_of_data = {
+static struct qcom_rng_match_data qcom_trng_match_data = {
 	.skip_init = true,
 	.hwrng_support = true,
 };
 
 static const struct acpi_device_id __maybe_unused qcom_rng_acpi_match[] = {
-	{ .id = "QCOM8160", .driver_data = (kernel_ulong_t)&qcom_prng_ee_of_data },
+	{ .id = "QCOM8160", .driver_data = (kernel_ulong_t)&qcom_prng_ee_match_data },
 	{}
 };
 MODULE_DEVICE_TABLE(acpi, qcom_rng_acpi_match);
 
 static const struct of_device_id __maybe_unused qcom_rng_of_match[] = {
-	{ .compatible = "qcom,prng", .data = &qcom_prng_of_data },
-	{ .compatible = "qcom,prng-ee", .data = &qcom_prng_ee_of_data },
-	{ .compatible = "qcom,trng", .data = &qcom_trng_of_data },
+	{ .compatible = "qcom,prng", .data = &qcom_prng_match_data },
+	{ .compatible = "qcom,prng-ee", .data = &qcom_prng_ee_match_data },
+	{ .compatible = "qcom,trng", .data = &qcom_trng_match_data },
 	{}
 };
 MODULE_DEVICE_TABLE(of, qcom_rng_of_match);
-- 
2.46.0