From nobody Mon Feb 9 17:35:22 2026 Received: from lelv0142.ext.ti.com (lelv0142.ext.ti.com [198.47.23.249]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 000F8145B17; Fri, 5 Jul 2024 06:26:59 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=198.47.23.249 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1720160821; cv=none; b=Bh9bT/jIFhWP7NIxRZk+dMQKGJpbcvoPbmBljvklVJnanw9BAqkfftVZUtZGR6y9v1AiHgrimPMHL+s2+NYBhPpY3WKqhrCfhzvNfWfrcMtLeYnUxnWa2FcolS0O3cvv5viNvd0aa0TASM4McA2/oefSkbDOeraZa025XbW1rEQ= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1720160821; c=relaxed/simple; bh=2hPwQeh2GVN3zVk9L+8Guy6HoxbD2IYpS3uZiLk6OtU=; h=From:Date:Subject:MIME-Version:Content-Type:Message-ID:References: In-Reply-To:To:CC; b=Ebmkb9XgQ4ahxRXg8qf04XhUnsNGA6G+J4aAV84PNp2x7F7oCbekKDmfbkvZLP8eOpb0hKNa+lCsE4DRhtaYENkh3nDBBCcGVMKm9B7Gkwdj1CNooiHfLr6D6MXxK8CLCt60Jz1mtuYM14ILY1UuOHV9tyt24+EGNoguq7UNAKs= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=ti.com; spf=pass smtp.mailfrom=ti.com; dkim=pass (1024-bit key) header.d=ti.com header.i=@ti.com header.b=bRkB+Fpg; arc=none smtp.client-ip=198.47.23.249 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=ti.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=ti.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (1024-bit key) header.d=ti.com header.i=@ti.com header.b="bRkB+Fpg" Received: from fllv0034.itg.ti.com ([10.64.40.246]) by lelv0142.ext.ti.com (8.15.2/8.15.2) with ESMTP id 4656Qsgx012632; Fri, 5 Jul 2024 01:26:54 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1720160814; bh=7OrY75KxpjrDo2Cp3k6pJUKMsYTPByuTEqWPq12EUFM=; h=From:Date:Subject:References:In-Reply-To:To:CC; b=bRkB+Fpgtq6CnE0X/Ia7h3Ejh+8vQxWPpE2gVv3t9sc4pdfjuMttZjL30u/TB0IGW rd3n9dooPIpjkWWgQy8hNCsfil/ztSN+YOgc/KuRXWmCuOVC3ZF2gl+TfNgVf5hkxo dUPGzfsH5Jwpit9DD5Srwy46ksEDRLTYq9FgbayQ= Received: from DLEE111.ent.ti.com (dlee111.ent.ti.com [157.170.170.22]) by fllv0034.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 4656QsSJ060044 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Fri, 5 Jul 2024 01:26:54 -0500 Received: from DLEE108.ent.ti.com (157.170.170.38) by DLEE111.ent.ti.com (157.170.170.22) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.2507.23; Fri, 5 Jul 2024 01:26:54 -0500 Received: from lelvsmtp5.itg.ti.com (10.180.75.250) by DLEE108.ent.ti.com (157.170.170.38) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.2507.23 via Frontend Transport; Fri, 5 Jul 2024 01:26:54 -0500 Received: from [127.0.1.1] (uda0497581.dhcp.ti.com [10.24.68.185]) by lelvsmtp5.itg.ti.com (8.15.2/8.15.2) with ESMTP id 4656QTk2127334; Fri, 5 Jul 2024 01:26:50 -0500 From: Manorit Chawdhry Date: Fri, 5 Jul 2024 11:56:31 +0530 Subject: [PATCH v2 5/5] arm64: dts: ti: k3-j7200*: Add bootph-* properties Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable Message-ID: <20240705-b4-upstream-bootph-all-v2-5-9007681ed7d8@ti.com> References: <20240705-b4-upstream-bootph-all-v2-0-9007681ed7d8@ti.com> In-Reply-To: <20240705-b4-upstream-bootph-all-v2-0-9007681ed7d8@ti.com> To: Nishanth Menon , Vignesh Raghavendra , Tero Kristo , Rob Herring , Krzysztof Kozlowski , Conor Dooley CC: , , , Neha Malcom Francis , Aniket Limaye , Udit Kumar , Beleswar Padhi , Manorit Chawdhry X-Mailer: b4 0.14-dev X-Developer-Signature: v=1; a=ed25519-sha256; t=1720160789; l=10033; i=m-chawdhry@ti.com; s=20231127; h=from:subject:message-id; bh=2hPwQeh2GVN3zVk9L+8Guy6HoxbD2IYpS3uZiLk6OtU=; b=C9HRemWFE9bc2fJFtFLhVPunx0reirjhhBfhYcynGy/avNUEwkdA3CUItCH3kpbpE9WVYMZug MR5rOaSvJj3D2Dz12hCeRsmUuIixk3oUKnLS0Jzhc++qMFupaAlJed8 X-Developer-Key: i=m-chawdhry@ti.com; a=ed25519; pk=fsr6Tm39TvsTgfyfFQLk+nnqIz2sBA1PthfqqfiiYSs= X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Adds bootph-* properties to the leaf nodes to enable U-boot to utilise them. Signed-off-by: Manorit Chawdhry --- .../boot/dts/ti/k3-j7200-common-proc-board.dts | 23 ++++++++++++++++++= ++++ arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 2 ++ arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 11 +++++++++++ arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi | 7 +++++++ 4 files changed, 43 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/a= rm64/boot/dts/ti/k3-j7200-common-proc-board.dts index 6593c5da82c0..f7b96e8d6462 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts @@ -129,6 +129,7 @@ J721E_WKUP_IOPAD(0x94, PIN_OUTPUT, 0) /* (E21) MCU_UART= 0_RTSn */ J721E_WKUP_IOPAD(0x8c, PIN_INPUT, 0) /* (D20) MCU_UART0_RXD */ J721E_WKUP_IOPAD(0x88, PIN_OUTPUT, 0) /* (D19) MCU_UART0_TXD */ >; + bootph-all; }; =20 wkup_uart0_pins_default: wkup-uart0-default-pins { @@ -136,6 +137,7 @@ wkup_uart0_pins_default: wkup-uart0-default-pins { J721E_WKUP_IOPAD(0x48, PIN_INPUT, 0) /* (B14) WKUP_UART0_RXD */ J721E_WKUP_IOPAD(0x4c, PIN_OUTPUT, 0) /* (A14) WKUP_UART0_TXD */ >; + bootph-all; }; =20 mcu_cpsw_pins_default: mcu-cpsw-default-pins { @@ -153,12 +155,14 @@ J721E_WKUP_IOPAD(0x002c, PIN_INPUT, 0) /* MCU_RGMII1_= RD0 */ J721E_WKUP_IOPAD(0x0018, PIN_OUTPUT, 0) /* MCU_RGMII1_TXC */ J721E_WKUP_IOPAD(0x001c, PIN_INPUT, 0) /* MCU_RGMII1_RXC */ >; + bootph-all; }; =20 wkup_gpio_pins_default: wkup-gpio-default-pins { pinctrl-single,pins =3D < J721E_WKUP_IOPAD(0x70, PIN_INPUT, 7) /* (C14) WKUP_GPIO0_6 */ >; + bootph-all; }; =20 mcu_mdio_pins_default: mcu-mdio1-default-pins { @@ -204,6 +208,7 @@ J721E_IOPAD(0xb4, PIN_OUTPUT, 0) /* (T17) UART0_TXD */ J721E_IOPAD(0xc0, PIN_INPUT, 2) /* (W3) SPI0_CS0.UART0_CTSn */ J721E_IOPAD(0xc4, PIN_OUTPUT, 2) /* (U5) SPI0_CS1.UART0_RTSn */ >; + bootph-all; }; =20 main_uart1_pins_default: main-uart1-default-pins { @@ -238,6 +243,7 @@ J721E_IOPAD(0xf0, PIN_INPUT, 0) /* (N20) MMC1_DAT2 */ J721E_IOPAD(0xec, PIN_INPUT, 0) /* (N19) MMC1_DAT3 */ J721E_IOPAD(0xe4, PIN_INPUT, 8) /* (V1) TIMER_IO0.MMC1_SDCD */ >; + bootph-all; }; =20 vdd_sd_dv_pins_default: vdd-sd-dv-default-pins { @@ -259,6 +265,7 @@ main_usbss0_pins_default: main-usbss0-default-pins { pinctrl-single,pins =3D < J721E_IOPAD(0x04, PIN_OUTPUT, 0) /* (T4) USB0_DRVVBUS */ >; + bootph-all; }; }; =20 @@ -267,12 +274,14 @@ &wkup_uart0 { status =3D "reserved"; pinctrl-names =3D "default"; pinctrl-0 =3D <&wkup_uart0_pins_default>; + bootph-all; }; =20 &mcu_uart0 { status =3D "okay"; pinctrl-names =3D "default"; pinctrl-0 =3D <&mcu_uart0_pins_default>; + bootph-all; }; =20 &main_uart0 { @@ -281,6 +290,7 @@ &main_uart0 { power-domains =3D <&k3_pds 146 TI_SCI_PD_SHARED>; pinctrl-names =3D "default"; pinctrl-0 =3D <&main_uart0_pins_default>; + bootph-all; }; =20 &main_uart1 { @@ -293,6 +303,7 @@ &main_uart1 { &main_uart2 { /* MAIN UART 2 is used by R5F firmware */ status =3D "reserved"; + bootph-all; /* Doubtful if required or not */ }; =20 &main_uart3 { @@ -310,11 +321,13 @@ &wkup_gpio0 { status =3D "okay"; pinctrl-names =3D "default"; pinctrl-0 =3D <&wkup_gpio_pins_default>; + bootph-all; }; =20 &mcu_cpsw { pinctrl-names =3D "default"; pinctrl-0 =3D <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>; + bootph-all; }; =20 &davinci_mdio { @@ -341,6 +354,7 @@ exp1: gpio@20 { reg =3D <0x20>; gpio-controller; #gpio-cells =3D <2>; + bootph-all; }; =20 exp2: gpio@22 { @@ -348,6 +362,7 @@ exp2: gpio@22 { reg =3D <0x22>; gpio-controller; #gpio-cells =3D <2>; + bootph-all; }; }; =20 @@ -381,6 +396,7 @@ &main_sdhci0 { non-removable; ti,driver-strength-ohm =3D <50>; disable-wp; + bootph-all; }; =20 &main_sdhci1 { @@ -392,15 +408,18 @@ &main_sdhci1 { vqmmc-supply =3D <&vdd_sd_dv>; ti,driver-strength-ohm =3D <50>; disable-wp; + bootph-all; }; =20 &serdes_ln_ctrl { idle-states =3D , , , ; + bootph-all; }; =20 &usb_serdes_mux { idle-states =3D <1>; /* USB0 to SERDES lane 3 */ + bootph-all; }; =20 &usbss0 { @@ -408,11 +427,13 @@ &usbss0 { pinctrl-0 =3D <&main_usbss0_pins_default>; ti,vbus-divider; ti,usb2-only; + bootph-all; }; =20 &usb0 { dr_mode =3D "otg"; maximum-speed =3D "high-speed"; + bootph-all; }; =20 &tscadc0 { @@ -432,6 +453,7 @@ serdes0_pcie_link: phy@0 { #phy-cells =3D <0>; cdns,phy-type =3D ; resets =3D <&serdes_wiz0 1>, <&serdes_wiz0 2>; + bootph-all; }; =20 serdes0_qsgmii_link: phy@1 { @@ -440,6 +462,7 @@ serdes0_qsgmii_link: phy@1 { #phy-cells =3D <0>; cdns,phy-type =3D ; resets =3D <&serdes_wiz0 3>; + bootph-all; }; }; =20 diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dt= s/ti/k3-j7200-main.dtsi index 9386bf3ef9f6..b95656942412 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi @@ -136,6 +136,7 @@ secure_proxy_main: mailbox@32c00000 { <0x00 0x32800000 0x00 0x100000>; interrupt-names =3D "rx_011"; interrupts =3D ; + bootph-all; }; =20 hwspinlock: spinlock@30e00000 { @@ -1528,5 +1529,6 @@ main_esm: esm@700000 { compatible =3D "ti,j721e-esm"; reg =3D <0x0 0x700000 0x0 0x1000>; ti,esm-pins =3D <656>, <657>; + bootph-all; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/b= oot/dts/ti/k3-j7200-mcu-wakeup.dtsi index 5097d192c2b2..fba8fa1557b1 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi @@ -17,20 +17,24 @@ dmsc: system-controller@44083000 { =20 reg-names =3D "debug_messages"; reg =3D <0x00 0x44083000 0x00 0x1000>; + bootph-all; =20 k3_pds: power-controller { compatible =3D "ti,sci-pm-domain"; #power-domain-cells =3D <2>; + bootph-all; }; =20 k3_clks: clock-controller { compatible =3D "ti,k2g-sci-clk"; #clock-cells =3D <2>; + bootph-all; }; =20 k3_reset: reset-controller { compatible =3D "ti,sci-reset"; #reset-cells =3D <2>; + bootph-all; }; }; =20 @@ -45,6 +49,7 @@ mcu_timer0: timer@40400000 { assigned-clock-parents =3D <&k3_clks 35 2>; power-domains =3D <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>; ti,timer-pwm; + bootph-pre-ram; }; =20 mcu_timer1: timer@40410000 { @@ -191,6 +196,7 @@ wkup_conf: bus@43000000 { chipid: chipid@14 { compatible =3D "ti,am654-chipid"; reg =3D <0x14 0x4>; + bootph-all; }; }; =20 @@ -349,6 +355,7 @@ mcu_ringacc: ringacc@2b800000 { ti,sci =3D <&dmsc>; ti,sci-dev-id =3D <235>; msi-parent =3D <&main_udmass_inta>; + bootph-all; }; =20 mcu_udmap: dma-controller@285c0000 { @@ -373,6 +380,7 @@ mcu_udmap: dma-controller@285c0000 { ti,sci-rm-range-rchan =3D <0x0a>, /* RX_CHAN */ <0x0b>; /* RX_HCHAN */ ti,sci-rm-range-rflow =3D <0x00>; /* GP RFLOW */ + bootph-all; }; }; =20 @@ -389,6 +397,7 @@ secure_proxy_mcu: mailbox@2a480000 { * firmware on non-MPU processors */ status =3D "disabled"; + bootph-pre-ram; }; =20 mcu_cpsw: ethernet@46000000 { @@ -534,6 +543,7 @@ hbmc_mux: mux-controller@47000004 { reg =3D <0x00 0x47000004 0x00 0x4>; #mux-control-cells =3D <1>; mux-reg-masks =3D <0x0 0x2>; /* HBMC select */ + bootph-pre-ram; }; =20 hbmc: hyperbus@47034000 { @@ -652,6 +662,7 @@ wkup_vtm0: temperature-sensor@42040000 { <0x00 0x42050000 0x00 0x350>; power-domains =3D <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>; #thermal-sensor-cells =3D <1>; + bootph-pre-ram; }; =20 mcu_esm: esm@40800000 { diff --git a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi b/arch/arm64/boot/= dts/ti/k3-j7200-som-p0.dtsi index 21fe194a5766..d78f86889bf9 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi @@ -121,6 +121,7 @@ J721E_WKUP_IOPAD(0x20, PIN_INPUT, 1) /* (B8) MCU_OSPI0_= D5.MCU_HYPERBUS0_DQ5 */ J721E_WKUP_IOPAD(0x24, PIN_INPUT, 1) /* (A8) MCU_OSPI0_D6.MCU_HYPERBUS0= _DQ6 */ J721E_WKUP_IOPAD(0x28, PIN_INPUT, 1) /* (A7) MCU_OSPI0_D7.MCU_HYPERBUS0= _DQ7 */ >; + bootph-all; }; =20 mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins { @@ -137,6 +138,7 @@ J721E_WKUP_IOPAD(0x0024, PIN_INPUT, 0) /* MCU_OSPI0_D6= */ J721E_WKUP_IOPAD(0x0028, PIN_INPUT, 0) /* MCU_OSPI0_D7 */ J721E_WKUP_IOPAD(0x0008, PIN_INPUT, 0) /* MCU_OSPI0_DQS */ >; + bootph-all; }; }; =20 @@ -146,6 +148,7 @@ wkup_i2c0_pins_default: wkup-i2c0-default-pins { J721E_WKUP_IOPAD(0x98, PIN_INPUT_PULLUP, 0) /* (F20) WKUP_I2C0_SCL */ J721E_WKUP_IOPAD(0x9c, PIN_INPUT_PULLUP, 0) /* (H21) WKUP_I2C0_SDA */ >; + bootph-all; }; }; =20 @@ -163,6 +166,7 @@ main_i2c0_pins_default: main-i2c0-default-pins { J721E_IOPAD(0xd4, PIN_INPUT_PULLUP, 0) /* (V3) I2C0_SCL */ J721E_IOPAD(0xd8, PIN_INPUT_PULLUP, 0) /* (W2) I2C0_SDA */ >; + bootph-all; }; =20 main_mcan0_pins_default: main-mcan0-default-pins { @@ -186,6 +190,7 @@ &hbmc { flash@0,0 { compatible =3D "cypress,hyperflash", "cfi-flash"; reg =3D <0x00 0x00 0x4000000>; + bootph-all; =20 partitions { compatible =3D "fixed-partitions"; @@ -330,6 +335,7 @@ bucka1: buck1 { regulator-max-microvolt =3D <1800000>; regulator-boot-on; regulator-always-on; + bootph-all; }; =20 bucka2: buck2 { @@ -464,6 +470,7 @@ flash@0 { cdns,tchsh-ns =3D <60>; cdns,tslch-ns =3D <60>; cdns,read-delay =3D <4>; + bootph-all; =20 partitions { compatible =3D "fixed-partitions"; --=20 2.45.1