[PATCH] xen-pciback: Allow setting PCI_MSIX_FLAGS_MASKALL too

Marek Marczykowski-Górecki posted 1 patch 1 year, 4 months ago
Failed in applying to current master (apply log)
There is a newer version of this series
drivers/xen/xen-pciback/conf_space_capability.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
[PATCH] xen-pciback: Allow setting PCI_MSIX_FLAGS_MASKALL too
Posted by Marek Marczykowski-Górecki 1 year, 4 months ago
When Xen domain configures MSI-X, the usual approach is to enable MSI-X
together with masking all of them via the config space, then fill the
table and only then clear PCI_MSIX_FLAGS_MASKALL. Allow doing this via
QEMU running in a stub domain.

Previously, when changing PCI_MSIX_FLAGS_MASKALL was not allowed, the
whole write was aborted, preventing change to the PCI_MSIX_FLAGS_ENABLE
bit too.

Note the Xen hypervisor intercepts this write anyway, and may keep the
PCI_MSIX_FLAGS_MASKALL bit set if it wishes to. It will store the
guest-requested state and will apply it eventually.

Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
---
 drivers/xen/xen-pciback/conf_space_capability.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/xen/xen-pciback/conf_space_capability.c b/drivers/xen/xen-pciback/conf_space_capability.c
index 5e53b4817f16..097316a74126 100644
--- a/drivers/xen/xen-pciback/conf_space_capability.c
+++ b/drivers/xen/xen-pciback/conf_space_capability.c
@@ -190,13 +190,16 @@ static const struct config_field caplist_pm[] = {
 };
 
 static struct msi_msix_field_config {
-	u16          enable_bit; /* bit for enabling MSI/MSI-X */
-	unsigned int int_type;   /* interrupt type for exclusiveness check */
+	u16          enable_bit;   /* bit for enabling MSI/MSI-X */
+	u16          allowed_bits; /* bits allowed to be changed */
+	unsigned int int_type;     /* interrupt type for exclusiveness check */
 } msi_field_config = {
 	.enable_bit	= PCI_MSI_FLAGS_ENABLE,
+	.allowed_bits	= PCI_MSI_FLAGS_ENABLE,
 	.int_type	= INTERRUPT_TYPE_MSI,
 }, msix_field_config = {
 	.enable_bit	= PCI_MSIX_FLAGS_ENABLE,
+	.allowed_bits	= PCI_MSIX_FLAGS_ENABLE | PCI_MSIX_FLAGS_MASKALL,
 	.int_type	= INTERRUPT_TYPE_MSIX,
 };
 
@@ -229,7 +232,7 @@ static int msi_msix_flags_write(struct pci_dev *dev, int offset, u16 new_value,
 		return 0;
 
 	if (!dev_data->allow_interrupt_control ||
-	    (new_value ^ old_value) & ~field_config->enable_bit)
+	    (new_value ^ old_value) & ~field_config->allowed_bits)
 		return PCIBIOS_SET_FAILED;
 
 	if (new_value & field_config->enable_bit) {
-- 
2.37.3


Re: [PATCH] xen-pciback: Allow setting PCI_MSIX_FLAGS_MASKALL too
Posted by Jan Beulich 1 year, 4 months ago
On 14.11.2022 11:31, Marek Marczykowski-Górecki wrote:
> When Xen domain configures MSI-X, the usual approach is to enable MSI-X
> together with masking all of them via the config space, then fill the
> table and only then clear PCI_MSIX_FLAGS_MASKALL. Allow doing this via
> QEMU running in a stub domain.
> 
> Previously, when changing PCI_MSIX_FLAGS_MASKALL was not allowed, the
> whole write was aborted, preventing change to the PCI_MSIX_FLAGS_ENABLE
> bit too.
> 
> Note the Xen hypervisor intercepts this write anyway, and may keep the
> PCI_MSIX_FLAGS_MASKALL bit set if it wishes to. It will store the
> guest-requested state and will apply it eventually.
> 
> Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>

Reviewed-by: Jan Beulich <jbeulich@suse.com>