Non-standard logical geometries break under QEMU. A virtual disk which contains an operating system which depends on logical geometries (consistent values being reported from BIOS INT13 AH=08) will most likely break under QEMU/SeaBIOS if it has non-standard logical geometries - for example 56 SPT (sectors per track). No matter what QEMU will guess - SeaBIOS, for large enough disks - will use LBA translation, which will report 63 SPT instead. In addition we can not enforce SeaBIOS to rely on phyiscal geometries at all. A virtio-blk-pci virtual disk with 255 phyiscal heads can not report more than 16 physical heads when moved to an IDE controller, the ATA spec allows a maximum of 16 heads - this is an artifact of virtualization. By supplying the logical geometies directly we are able to support such "exotic" disks. We will use fw_cfg to do just that. Sam Eiderman (8): block: Refactor macros - fix tabbing block: Support providing LCHS from user bootdevice: Add interface to gather LCHS scsi: Propagate unrealize() callback to scsi-hd bootdevice: Gather LCHS from all relevant devices bootdevice: Refactor get_boot_devices_list bootdevice: FW_CFG interface for LCHS values hd-geo-test: Add tests for lchs override bootdevice.c | 158 ++++++++++--- hw/block/virtio-blk.c | 6 + hw/ide/qdev.c | 7 +- hw/nvram/fw_cfg.c | 14 +- hw/scsi/scsi-bus.c | 15 ++ hw/scsi/scsi-disk.c | 14 ++ include/hw/block/block.h | 22 +- include/hw/scsi/scsi.h | 1 + include/sysemu/sysemu.h | 4 + tests/Makefile.include | 2 +- tests/hd-geo-test.c | 565 +++++++++++++++++++++++++++++++++++++++++++++++ 11 files changed, 767 insertions(+), 41 deletions(-) -- 2.13.3 _______________________________________________ SeaBIOS mailing list -- seabios@seabios.org To unsubscribe send an email to seabios-leave@seabios.org Fixing tabbing in block related macros. Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com> Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com> Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com> --- hw/ide/qdev.c | 2 +- include/hw/block/block.h | 16 ++++++++-------- 2 files changed, 9 insertions(+), 9 deletions(-) diff --git a/hw/ide/qdev.c b/hw/ide/qdev.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ide/qdev.c +++ b/hw/ide/qdev.c @@ -XXX,XX +XXX,XX @@ static void ide_drive_realize(IDEDevice *dev, Error **errp) DEFINE_BLOCK_PROPERTIES(IDEDrive, dev.conf), \ DEFINE_BLOCK_ERROR_PROPERTIES(IDEDrive, dev.conf), \ DEFINE_PROP_STRING("ver", IDEDrive, dev.version), \ - DEFINE_PROP_UINT64("wwn", IDEDrive, dev.wwn, 0), \ + DEFINE_PROP_UINT64("wwn", IDEDrive, dev.wwn, 0), \ DEFINE_PROP_STRING("serial", IDEDrive, dev.serial),\ DEFINE_PROP_STRING("model", IDEDrive, dev.model) diff --git a/include/hw/block/block.h b/include/hw/block/block.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/block/block.h +++ b/include/hw/block/block.h @@ -XXX,XX +XXX,XX @@ static inline unsigned int get_physical_block_exp(BlockConf *conf) _conf.logical_block_size), \ DEFINE_PROP_BLOCKSIZE("physical_block_size", _state, \ _conf.physical_block_size), \ - DEFINE_PROP_UINT16("min_io_size", _state, _conf.min_io_size, 0), \ + DEFINE_PROP_UINT16("min_io_size", _state, _conf.min_io_size, 0), \ DEFINE_PROP_UINT32("opt_io_size", _state, _conf.opt_io_size, 0), \ - DEFINE_PROP_UINT32("discard_granularity", _state, \ - _conf.discard_granularity, -1), \ - DEFINE_PROP_ON_OFF_AUTO("write-cache", _state, _conf.wce, \ - ON_OFF_AUTO_AUTO), \ + DEFINE_PROP_UINT32("discard_granularity", _state, \ + _conf.discard_granularity, -1), \ + DEFINE_PROP_ON_OFF_AUTO("write-cache", _state, _conf.wce, \ + ON_OFF_AUTO_AUTO), \ DEFINE_PROP_BOOL("share-rw", _state, _conf.share_rw, false) #define DEFINE_BLOCK_PROPERTIES(_state, _conf) \ DEFINE_PROP_DRIVE("drive", _state, _conf.blk), \ DEFINE_BLOCK_PROPERTIES_BASE(_state, _conf) -#define DEFINE_BLOCK_CHS_PROPERTIES(_state, _conf) \ - DEFINE_PROP_UINT32("cyls", _state, _conf.cyls, 0), \ - DEFINE_PROP_UINT32("heads", _state, _conf.heads, 0), \ +#define DEFINE_BLOCK_CHS_PROPERTIES(_state, _conf) \ + DEFINE_PROP_UINT32("cyls", _state, _conf.cyls, 0), \ + DEFINE_PROP_UINT32("heads", _state, _conf.heads, 0), \ DEFINE_PROP_UINT32("secs", _state, _conf.secs, 0) #define DEFINE_BLOCK_ERROR_PROPERTIES(_state, _conf) \ -- 2.13.3 _______________________________________________ SeaBIOS mailing list -- seabios@seabios.org To unsubscribe send an email to seabios-leave@seabios.org Add logical geometry variables to BlockConf. A user can now supply "lcyls", "lheads" & "lsecs" for any HD device that supports CHS ("cyls", "heads", "secs"). These devices include: * ide-hd * scsi-hd * virtio-blk-pci In future commits we will use the provided LCHS and pass it to the BIOS through fw_cfg to be supplied using INT13 routines. Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com> Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com> Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com> --- include/hw/block/block.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/include/hw/block/block.h b/include/hw/block/block.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/block/block.h +++ b/include/hw/block/block.h @@ -XXX,XX +XXX,XX @@ typedef struct BlockConf { uint32_t discard_granularity; /* geometry, not all devices use this */ uint32_t cyls, heads, secs; + uint32_t lcyls, lheads, lsecs; OnOffAuto wce; bool share_rw; BlockdevOnError rerror; @@ -XXX,XX +XXX,XX @@ static inline unsigned int get_physical_block_exp(BlockConf *conf) #define DEFINE_BLOCK_CHS_PROPERTIES(_state, _conf) \ DEFINE_PROP_UINT32("cyls", _state, _conf.cyls, 0), \ DEFINE_PROP_UINT32("heads", _state, _conf.heads, 0), \ - DEFINE_PROP_UINT32("secs", _state, _conf.secs, 0) + DEFINE_PROP_UINT32("secs", _state, _conf.secs, 0), \ + DEFINE_PROP_UINT32("lcyls", _state, _conf.lcyls, 0), \ + DEFINE_PROP_UINT32("lheads", _state, _conf.lheads, 0), \ + DEFINE_PROP_UINT32("lsecs", _state, _conf.lsecs, 0) #define DEFINE_BLOCK_ERROR_PROPERTIES(_state, _conf) \ DEFINE_PROP_BLOCKDEV_ON_ERROR("rerror", _state, _conf.rerror, \ -- 2.13.3 _______________________________________________ SeaBIOS mailing list -- seabios@seabios.org To unsubscribe send an email to seabios-leave@seabios.org Add an interface to provide direct logical CHS values for boot devices. We will use this interface in the next commits. Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com> Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com> Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com> --- bootdevice.c | 55 +++++++++++++++++++++++++++++++++++++++++++++++++ include/sysemu/sysemu.h | 3 +++ 2 files changed, 58 insertions(+) diff --git a/bootdevice.c b/bootdevice.c index XXXXXXX..XXXXXXX 100644 --- a/bootdevice.c +++ b/bootdevice.c @@ -XXX,XX +XXX,XX @@ void device_add_bootindex_property(Object *obj, int32_t *bootindex, /* initialize devices' bootindex property to -1 */ object_property_set_int(obj, -1, name, NULL); } + +typedef struct FWLCHSEntry FWLCHSEntry; + +struct FWLCHSEntry { + QTAILQ_ENTRY(FWLCHSEntry) link; + DeviceState *dev; + char *suffix; + uint32_t lcyls; + uint32_t lheads; + uint32_t lsecs; +}; + +static QTAILQ_HEAD(, FWLCHSEntry) fw_lchs = + QTAILQ_HEAD_INITIALIZER(fw_lchs); + +void add_boot_device_lchs(DeviceState *dev, const char *suffix, + uint32_t lcyls, uint32_t lheads, uint32_t lsecs) +{ + FWLCHSEntry *node; + + if (!lcyls && !lheads && !lsecs) { + return; + } + + assert(dev != NULL || suffix != NULL); + + node = g_malloc0(sizeof(FWLCHSEntry)); + node->suffix = g_strdup(suffix); + node->dev = dev; + node->lcyls = lcyls; + node->lheads = lheads; + node->lsecs = lsecs; + + QTAILQ_INSERT_TAIL(&fw_lchs, node, link); +} + +void del_boot_device_lchs(DeviceState *dev, const char *suffix) +{ + FWLCHSEntry *i; + + if (dev == NULL) { + return; + } + + QTAILQ_FOREACH(i, &fw_lchs, link) { + if ((!suffix || !g_strcmp0(i->suffix, suffix)) && + i->dev == dev) { + QTAILQ_REMOVE(&fw_lchs, i, link); + g_free(i->suffix); + g_free(i); + + break; + } + } +} diff --git a/include/sysemu/sysemu.h b/include/sysemu/sysemu.h index XXXXXXX..XXXXXXX 100644 --- a/include/sysemu/sysemu.h +++ b/include/sysemu/sysemu.h @@ -XXX,XX +XXX,XX @@ void device_add_bootindex_property(Object *obj, int32_t *bootindex, DeviceState *dev, Error **errp); void restore_boot_order(void *opaque); void validate_bootdevices(const char *devices, Error **errp); +void add_boot_device_lchs(DeviceState *dev, const char *suffix, + uint32_t lcyls, uint32_t lheads, uint32_t lsecs); +void del_boot_device_lchs(DeviceState *dev, const char *suffix); /* handler to set the boot_device order for a specific type of MachineClass */ typedef void QEMUBootSetHandler(void *opaque, const char *boot_order, -- 2.13.3 _______________________________________________ SeaBIOS mailing list -- seabios@seabios.org To unsubscribe send an email to seabios-leave@seabios.org We will need to add LCHS removal logic to scsi-hd's unrealize() in the next commit. Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com> Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com> Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com> --- hw/scsi/scsi-bus.c | 15 +++++++++++++++ include/hw/scsi/scsi.h | 1 + 2 files changed, 16 insertions(+) diff --git a/hw/scsi/scsi-bus.c b/hw/scsi/scsi-bus.c index XXXXXXX..XXXXXXX 100644 --- a/hw/scsi/scsi-bus.c +++ b/hw/scsi/scsi-bus.c @@ -XXX,XX +XXX,XX @@ static void scsi_device_realize(SCSIDevice *s, Error **errp) } } +static void scsi_device_unrealize(SCSIDevice *s, Error **errp) +{ + SCSIDeviceClass *sc = SCSI_DEVICE_GET_CLASS(s); + if (sc->unrealize) { + sc->unrealize(s, errp); + } +} + int scsi_bus_parse_cdb(SCSIDevice *dev, SCSICommand *cmd, uint8_t *buf, void *hba_private) { @@ -XXX,XX +XXX,XX @@ static void scsi_qdev_realize(DeviceState *qdev, Error **errp) static void scsi_qdev_unrealize(DeviceState *qdev, Error **errp) { SCSIDevice *dev = SCSI_DEVICE(qdev); + Error *local_err = NULL; if (dev->vmsentry) { qemu_del_vm_change_state_handler(dev->vmsentry); } + scsi_device_unrealize(dev, &local_err); + if (local_err) { + error_propagate(errp, local_err); + return; + } + scsi_device_purge_requests(dev, SENSE_CODE(NO_SENSE)); blockdev_mark_auto_del(dev->conf.blk); } diff --git a/include/hw/scsi/scsi.h b/include/hw/scsi/scsi.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/scsi/scsi.h +++ b/include/hw/scsi/scsi.h @@ -XXX,XX +XXX,XX @@ struct SCSIRequest { typedef struct SCSIDeviceClass { DeviceClass parent_class; void (*realize)(SCSIDevice *dev, Error **errp); + void (*unrealize)(SCSIDevice *dev, Error **errp); int (*parse_cdb)(SCSIDevice *dev, SCSICommand *cmd, uint8_t *buf, void *hba_private); SCSIRequest *(*alloc_req)(SCSIDevice *s, uint32_t tag, uint32_t lun, -- 2.13.3 _______________________________________________ SeaBIOS mailing list -- seabios@seabios.org To unsubscribe send an email to seabios-leave@seabios.org Relevant devices are: * ide-hd (and ide-cd, ide-drive) * scsi-hd (and scsi-cd, scsi-disk, scsi-block) * virtio-blk-pci We do not call del_boot_device_lchs() for ide-* since we don't need to - IDE block devices do not support unplugging. Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com> Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com> Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com> --- hw/block/virtio-blk.c | 6 ++++++ hw/ide/qdev.c | 5 +++++ hw/scsi/scsi-disk.c | 14 ++++++++++++++ 3 files changed, 25 insertions(+) diff --git a/hw/block/virtio-blk.c b/hw/block/virtio-blk.c index XXXXXXX..XXXXXXX 100644 --- a/hw/block/virtio-blk.c +++ b/hw/block/virtio-blk.c @@ -XXX,XX +XXX,XX @@ static void virtio_blk_device_realize(DeviceState *dev, Error **errp) blk_set_guest_block_size(s->blk, s->conf.conf.logical_block_size); blk_iostatus_enable(s->blk); + + add_boot_device_lchs(dev, "/disk@0,0", + (&conf->conf)->lcyls, + (&conf->conf)->lheads, + (&conf->conf)->lsecs); } static void virtio_blk_device_unrealize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void virtio_blk_device_unrealize(DeviceState *dev, Error **errp) VirtIODevice *vdev = VIRTIO_DEVICE(dev); VirtIOBlock *s = VIRTIO_BLK(dev); + del_boot_device_lchs(dev, "/disk@0,0"); virtio_blk_data_plane_destroy(s->dataplane); s->dataplane = NULL; qemu_del_vm_change_state_handler(s->change); diff --git a/hw/ide/qdev.c b/hw/ide/qdev.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ide/qdev.c +++ b/hw/ide/qdev.c @@ -XXX,XX +XXX,XX @@ static void ide_dev_initfn(IDEDevice *dev, IDEDriveKind kind, Error **errp) add_boot_device_path(dev->conf.bootindex, &dev->qdev, dev->unit ? "/disk@1" : "/disk@0"); + + add_boot_device_lchs(&dev->qdev, dev->unit ? "/disk@1" : "/disk@0", + (&dev->conf)->lcyls, + (&dev->conf)->lheads, + (&dev->conf)->lsecs); } static void ide_dev_get_bootindex(Object *obj, Visitor *v, const char *name, diff --git a/hw/scsi/scsi-disk.c b/hw/scsi/scsi-disk.c index XXXXXXX..XXXXXXX 100644 --- a/hw/scsi/scsi-disk.c +++ b/hw/scsi/scsi-disk.c @@ -XXX,XX +XXX,XX @@ static void scsi_realize(SCSIDevice *dev, Error **errp) blk_set_guest_block_size(s->qdev.conf.blk, s->qdev.blocksize); blk_iostatus_enable(s->qdev.conf.blk); + + add_boot_device_lchs(&dev->qdev, NULL, + (&dev->conf)->lcyls, + (&dev->conf)->lheads, + (&dev->conf)->lsecs); +} + +static void scsi_unrealize(SCSIDevice *dev, Error **errp) +{ + del_boot_device_lchs(&dev->qdev, NULL); } static void scsi_hd_realize(SCSIDevice *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void scsi_hd_class_initfn(ObjectClass *klass, void *data) SCSIDeviceClass *sc = SCSI_DEVICE_CLASS(klass); sc->realize = scsi_hd_realize; + sc->unrealize = scsi_unrealize; sc->alloc_req = scsi_new_request; sc->unit_attention_reported = scsi_disk_unit_attention_reported; dc->desc = "virtual SCSI disk"; @@ -XXX,XX +XXX,XX @@ static void scsi_cd_class_initfn(ObjectClass *klass, void *data) SCSIDeviceClass *sc = SCSI_DEVICE_CLASS(klass); sc->realize = scsi_cd_realize; + sc->unrealize = scsi_unrealize; sc->alloc_req = scsi_new_request; sc->unit_attention_reported = scsi_disk_unit_attention_reported; dc->desc = "virtual SCSI CD-ROM"; @@ -XXX,XX +XXX,XX @@ static void scsi_block_class_initfn(ObjectClass *klass, void *data) SCSIDiskClass *sdc = SCSI_DISK_BASE_CLASS(klass); sc->realize = scsi_block_realize; + sc->unrealize = scsi_unrealize; sc->alloc_req = scsi_block_new_request; sc->parse_cdb = scsi_block_parse_cdb; sdc->dma_readv = scsi_block_dma_readv; @@ -XXX,XX +XXX,XX @@ static void scsi_disk_class_initfn(ObjectClass *klass, void *data) SCSIDeviceClass *sc = SCSI_DEVICE_CLASS(klass); sc->realize = scsi_disk_realize; + sc->unrealize = scsi_unrealize; sc->alloc_req = scsi_new_request; sc->unit_attention_reported = scsi_disk_unit_attention_reported; dc->fw_name = "disk"; -- 2.13.3 _______________________________________________ SeaBIOS mailing list -- seabios@seabios.org To unsubscribe send an email to seabios-leave@seabios.org Move device name construction to a separate function. We will reuse this function in the following commit to pass logical CHS parameters through fw_cfg much like we currently pass bootindex. Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com> Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com> Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com> --- bootdevice.c | 61 +++++++++++++++++++++++++++++++++--------------------------- 1 file changed, 34 insertions(+), 27 deletions(-) diff --git a/bootdevice.c b/bootdevice.c index XXXXXXX..XXXXXXX 100644 --- a/bootdevice.c +++ b/bootdevice.c @@ -XXX,XX +XXX,XX @@ DeviceState *get_boot_device(uint32_t position) return res; } +static char *get_boot_device_path(DeviceState *dev, bool ignore_suffixes, + char *suffix) +{ + char *devpath = NULL, *s = NULL, *d, *bootpath; + + if (dev) { + devpath = qdev_get_fw_dev_path(dev); + assert(devpath); + } + + if (!ignore_suffixes) { + if (dev) { + d = qdev_get_own_fw_dev_path_from_handler(dev->parent_bus, dev); + if (d) { + assert(!suffix); + s = d; + } else { + s = g_strdup(suffix); + } + } else { + s = g_strdup(suffix); + } + } + + bootpath = g_strdup_printf("%s%s", + devpath ? devpath : "", + s ? s : ""); + g_free(devpath); + g_free(s); + + return bootpath; +} + /* * This function returns null terminated string that consist of new line * separated device paths. @@ -XXX,XX +XXX,XX @@ char *get_boot_devices_list(size_t *size) bool ignore_suffixes = mc->ignore_boot_device_suffixes; QTAILQ_FOREACH(i, &fw_boot_order, link) { - char *devpath = NULL, *suffix = NULL; char *bootpath; - char *d; size_t len; - if (i->dev) { - devpath = qdev_get_fw_dev_path(i->dev); - assert(devpath); - } - - if (!ignore_suffixes) { - if (i->dev) { - d = qdev_get_own_fw_dev_path_from_handler(i->dev->parent_bus, - i->dev); - if (d) { - assert(!i->suffix); - suffix = d; - } else { - suffix = g_strdup(i->suffix); - } - } else { - suffix = g_strdup(i->suffix); - } - } - - bootpath = g_strdup_printf("%s%s", - devpath ? devpath : "", - suffix ? suffix : ""); - g_free(devpath); - g_free(suffix); + bootpath = get_boot_device_path(i->dev, ignore_suffixes, i->suffix); if (total) { list[total-1] = '\n'; -- 2.13.3 _______________________________________________ SeaBIOS mailing list -- seabios@seabios.org To unsubscribe send an email to seabios-leave@seabios.org Using fw_cfg, supply logical CHS values directly from QEMU to the BIOS. Non-standard logical geometries break under QEMU. A virtual disk which contains an operating system which depends on logical geometries (consistent values being reported from BIOS INT13 AH=08) will most likely break under QEMU/SeaBIOS if it has non-standard logical geometries - for example 56 SPT (sectors per track). No matter what QEMU will report - SeaBIOS, for large enough disks - will use LBA translation, which will report 63 SPT instead. In addition we cannot force SeaBIOS to rely on physical geometries at all. A virtio-blk-pci virtual disk with 255 phyiscal heads cannot report more than 16 physical heads when moved to an IDE controller, since the ATA spec allows a maximum of 16 heads - this is an artifact of virtualization. By supplying the logical geometries directly we are able to support such "exotic" disks. We serialize this information in a similar way to the "bootorder" interface. The fw_cfg entry is "bootdevices" and it serializes a struct. At the moment the struct holds the values of logical CHS values but it can be expanded easily due to the extendable ABI implemented. (In the future, we can pass the bootindex through "bootdevices" instead "bootorder" - unifying all bootdevice information in one fw_cfg value) The PV interface through fw_cfg could have also been implemented using device specific keys, e.g.: "/etc/bootdevice/%s/logical_geometry" where %s is the device name QEMU produces - but this implementation would require much more code refactoring, both in QEMU and SeaBIOS, so the current implementation was chosen. Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com> Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com> Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com> --- bootdevice.c | 42 ++++++++++++++++++++++++++++++++++++++++++ hw/nvram/fw_cfg.c | 14 +++++++++++--- include/sysemu/sysemu.h | 1 + 3 files changed, 54 insertions(+), 3 deletions(-) diff --git a/bootdevice.c b/bootdevice.c index XXXXXXX..XXXXXXX 100644 --- a/bootdevice.c +++ b/bootdevice.c @@ -XXX,XX +XXX,XX @@ void del_boot_device_lchs(DeviceState *dev, const char *suffix) } } } + +typedef struct QEMU_PACKED BootDeviceEntrySerialized { + /* Do not change field order - add new fields below */ + uint32_t lcyls; + uint32_t lheads; + uint32_t lsecs; +} BootDeviceEntrySerialized; + +/* Serialized as: struct size (4) + (device name\0 + device struct) x devices */ +char *get_boot_devices_info(size_t *size) +{ + FWLCHSEntry *i; + BootDeviceEntrySerialized s; + size_t total = 0; + char *list = NULL; + + list = g_malloc0(sizeof(uint32_t)); + *((uint32_t *)list) = (uint32_t)sizeof(s); + total = sizeof(uint32_t); + + QTAILQ_FOREACH(i, &fw_lchs, link) { + char *bootpath; + size_t len; + + bootpath = get_boot_device_path(i->dev, false, i->suffix); + s.lcyls = i->lcyls; + s.lheads = i->lheads; + s.lsecs = i->lsecs; + + len = strlen(bootpath) + 1; + list = g_realloc(list, total + len + sizeof(s)); + memcpy(&list[total], bootpath, len); + memcpy(&list[total + len], &s, sizeof(s)); + total += len + sizeof(s); + + g_free(bootpath); + } + + *size = total; + + return list; +} diff --git a/hw/nvram/fw_cfg.c b/hw/nvram/fw_cfg.c index XXXXXXX..XXXXXXX 100644 --- a/hw/nvram/fw_cfg.c +++ b/hw/nvram/fw_cfg.c @@ -XXX,XX +XXX,XX @@ void *fw_cfg_modify_file(FWCfgState *s, const char *filename, static void fw_cfg_machine_reset(void *opaque) { + MachineClass *mc = MACHINE_GET_CLASS(qdev_get_machine()); + FWCfgState *s = opaque; void *ptr; size_t len; - FWCfgState *s = opaque; - char *bootindex = get_boot_devices_list(&len); + char *buf; - ptr = fw_cfg_modify_file(s, "bootorder", (uint8_t *)bootindex, len); + buf = get_boot_devices_list(&len); + ptr = fw_cfg_modify_file(s, "bootorder", (uint8_t *)buf, len); g_free(ptr); + + if (!mc->legacy_fw_cfg_order) { + buf = get_boot_devices_info(&len); + ptr = fw_cfg_modify_file(s, "bootdevices", (uint8_t *)buf, len); + g_free(ptr); + } } static void fw_cfg_machine_ready(struct Notifier *n, void *data) diff --git a/include/sysemu/sysemu.h b/include/sysemu/sysemu.h index XXXXXXX..XXXXXXX 100644 --- a/include/sysemu/sysemu.h +++ b/include/sysemu/sysemu.h @@ -XXX,XX +XXX,XX @@ void validate_bootdevices(const char *devices, Error **errp); void add_boot_device_lchs(DeviceState *dev, const char *suffix, uint32_t lcyls, uint32_t lheads, uint32_t lsecs); void del_boot_device_lchs(DeviceState *dev, const char *suffix); +char *get_boot_devices_info(size_t *size); /* handler to set the boot_device order for a specific type of MachineClass */ typedef void QEMUBootSetHandler(void *opaque, const char *boot_order, -- 2.13.3 _______________________________________________ SeaBIOS mailing list -- seabios@seabios.org To unsubscribe send an email to seabios-leave@seabios.org Add QTest tests to check the logical geometry override option. The tests in hd-geo-test are out of date - they only test IDE and do not test interesting MBRs. I added a few helper functions which will make adding more tests easier. QTest's fw_cfg helper functions support only legacy fw_cfg, so I had to read the new fw_cfg layout on my own. Creating qcow2 disks with specific size and MBR layout is currently unused - we only use a default empty MBR. Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com> Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com> Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com> --- tests/Makefile.include | 2 +- tests/hd-geo-test.c | 565 +++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 566 insertions(+), 1 deletion(-) diff --git a/tests/Makefile.include b/tests/Makefile.include index XXXXXXX..XXXXXXX 100644 --- a/tests/Makefile.include +++ b/tests/Makefile.include @@ -XXX,XX +XXX,XX @@ tests/ide-test$(EXESUF): tests/ide-test.o $(libqos-pc-obj-y) tests/ahci-test$(EXESUF): tests/ahci-test.o $(libqos-pc-obj-y) qemu-img$(EXESUF) tests/ipmi-kcs-test$(EXESUF): tests/ipmi-kcs-test.o tests/ipmi-bt-test$(EXESUF): tests/ipmi-bt-test.o -tests/hd-geo-test$(EXESUF): tests/hd-geo-test.o +tests/hd-geo-test$(EXESUF): tests/hd-geo-test.o $(libqos-obj-y) tests/boot-order-test$(EXESUF): tests/boot-order-test.o $(libqos-obj-y) tests/boot-serial-test$(EXESUF): tests/boot-serial-test.o $(libqos-obj-y) tests/bios-tables-test$(EXESUF): tests/bios-tables-test.o \ diff --git a/tests/hd-geo-test.c b/tests/hd-geo-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/hd-geo-test.c +++ b/tests/hd-geo-test.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qemu-common.h" +#include "qemu/bswap.h" +#include "qapi/qmp/qlist.h" #include "libqtest.h" +#include "libqos/fw_cfg.h" +#include "standard-headers/linux/qemu_fw_cfg.h" #define ARGV_SIZE 256 @@ -XXX,XX +XXX,XX @@ static void test_ide_drive_cd_0(void) qtest_quit(qts); } +typedef struct { + bool active; + uint32_t head; + uint32_t sector; + uint32_t cyl; + uint32_t end_head; + uint32_t end_sector; + uint32_t end_cyl; + uint32_t start_sect; + uint32_t nr_sects; +} MBRpartitions[4]; + +static MBRpartitions empty_mbr = { {false, 0, 0, 0, 0, 0, 0, 0, 0}, + {false, 0, 0, 0, 0, 0, 0, 0, 0}, + {false, 0, 0, 0, 0, 0, 0, 0, 0}, + {false, 0, 0, 0, 0, 0, 0, 0, 0} }; + +static char *create_qcow2_with_mbr(MBRpartitions mbr, uint64_t sectors) +{ + const char *template = "/tmp/qtest.XXXXXX"; + char *raw_path = strdup(template); + char *qcow2_path = strdup(template); + char cmd[100 + 2 * PATH_MAX]; + uint8_t buf[512]; + int i, ret, fd, offset; + uint64_t qcow2_size = sectors * 512; + uint8_t status, parttype, head, sector, cyl; + + offset = 0xbe; + + for (i = 0; i < 4; i++) { + status = mbr[i].active ? 0x80 : 0x00; + g_assert(mbr[i].head < 256); + g_assert(mbr[i].sector < 64); + g_assert(mbr[i].cyl < 1024); + head = mbr[i].head; + sector = mbr[i].sector + ((mbr[i].cyl & 0x300) >> 2); + cyl = mbr[i].cyl & 0xff; + + buf[offset + 0x0] = status; + buf[offset + 0x1] = head; + buf[offset + 0x2] = sector; + buf[offset + 0x3] = cyl; + + parttype = 0; + g_assert(mbr[i].end_head < 256); + g_assert(mbr[i].end_sector < 64); + g_assert(mbr[i].end_cyl < 1024); + head = mbr[i].end_head; + sector = mbr[i].end_sector + ((mbr[i].end_cyl & 0x300) >> 2); + cyl = mbr[i].end_cyl & 0xff; + + buf[offset + 0x4] = parttype; + buf[offset + 0x5] = head; + buf[offset + 0x6] = sector; + buf[offset + 0x7] = cyl; + + (*(uint32_t *)&buf[offset + 0x8]) = cpu_to_le32(mbr[i].start_sect); + (*(uint32_t *)&buf[offset + 0xc]) = cpu_to_le32(mbr[i].nr_sects); + + offset += 0x10; + } + + fd = mkstemp(raw_path); + g_assert(fd); + close(fd); + + fd = open(raw_path, O_WRONLY); + g_assert(fd >= 0); + ret = write(fd, buf, sizeof(buf)); + g_assert(ret == sizeof(buf)); + close(fd); + + fd = mkstemp(qcow2_path); + g_assert(fd); + close(fd); + + ret = snprintf(cmd, sizeof(cmd), + "$QTEST_QEMU_IMG convert -f raw -O qcow2 %s %s > /dev/null", + raw_path, qcow2_path); + g_assert((0 < ret) && (ret <= sizeof(cmd))); + ret = system(cmd); + g_assert(ret == 0); + + ret = snprintf(cmd, sizeof(cmd), + "$QTEST_QEMU_IMG resize %s %" PRIu64 " > /dev/null", + qcow2_path, qcow2_size); + g_assert((0 < ret) && (ret <= sizeof(cmd))); + ret = system(cmd); + g_assert(ret == 0); + + unlink(raw_path); + free(raw_path); + + return qcow2_path; +} + +struct QemuCfgFile { + uint32_t size; /* file size */ + uint16_t select; /* write this to 0x510 to read it */ + uint16_t reserved; + char name[56]; +}; + +static uint16_t find_fw_cfg_file(QFWCFG *fw_cfg, + const char *filename) +{ + struct QemuCfgFile qfile; + uint32_t count, e; + uint16_t select; + + count = qfw_cfg_get_u32(fw_cfg, FW_CFG_FILE_DIR); + count = be32_to_cpu(count); + for (select = 0, e = 0; e < count; e++) { + qfw_cfg_read_data(fw_cfg, &qfile, sizeof(qfile)); + if (!strcmp(filename, qfile.name)) { + select = be16_to_cpu(qfile.select); + } + } + + return select; +} + +static void read_fw_cfg_file(QFWCFG *fw_cfg, + const char *filename, + void *data, + size_t len) +{ + uint16_t select = find_fw_cfg_file(fw_cfg, filename); + + g_assert(select); + + qfw_cfg_get(fw_cfg, select, data, len); +} + +#define BOOTDEVICES_MAX_SIZE 10000 + +typedef struct { + uint32_t c; + uint32_t h; + uint32_t s; +} CHS; + +typedef struct { + const char *dev_path; + CHS chs; +} CHSResult; + +static void read_bootdevices(QFWCFG *fw_cfg, CHSResult expected[]) +{ + uint32_t info_size; + char *buf = g_malloc0(BOOTDEVICES_MAX_SIZE); + void *cur; + char *name; + CHS *chs; + GList *results = NULL, *cur_result; + CHSResult *r; + int i; + bool found; + + read_fw_cfg_file(fw_cfg, "bootdevices", buf, BOOTDEVICES_MAX_SIZE); + + cur = buf; + + info_size = *((uint32_t *)cur); + + g_assert(info_size >= sizeof(*chs)); + + cur += 4; + + while (strlen(cur)) { + name = cur; + chs = cur + strlen(cur) + 1; + + r = g_malloc0(sizeof(*r)); + r->dev_path = name; + r->chs = *chs; + + results = g_list_prepend(results, r); + + cur += strlen(cur) + 1 + info_size; + } + + i = 0; + + while (expected[i].dev_path) { + found = false; + cur_result = results; + while (cur_result) { + r = cur_result->data; + if (!strcmp(r->dev_path, expected[i].dev_path) && + !memcmp(&(r->chs), &(expected[i].chs), sizeof(r->chs))) { + found = true; + break; + } + cur_result = g_list_next(cur_result); + } + g_assert(found); + g_free(cur_result->data); + results = g_list_delete_link(results, cur_result); + i++; + } + + g_assert(results == NULL); + + g_free(buf); +} + +#define MAX_DRIVES 30 + +typedef struct { + char **argv; + int argc; + char **drives; + int n_drives; + int n_scsi_disks; + int n_scsi_controllers; + int n_virtio_disks; +} TestArgs; + +static TestArgs *create_args(void) +{ + TestArgs *args = g_malloc0(sizeof(*args)); + args->argv = g_new0(char *, ARGV_SIZE); + args->argc = append_arg(args->argc, args->argv, + ARGV_SIZE, g_strdup("-nodefaults")); + args->drives = g_new0(char *, MAX_DRIVES); + return args; +} + +static void add_drive_with_mbr(TestArgs *args, + MBRpartitions mbr, uint64_t sectors) +{ + char *img_file_name; + char part[300]; + int ret; + + g_assert(args->n_drives < MAX_DRIVES); + + img_file_name = create_qcow2_with_mbr(mbr, sectors); + + args->drives[args->n_drives] = img_file_name; + ret = snprintf(part, sizeof(part), + "-drive file=%s,if=none,format=qcow2,id=disk%d", + img_file_name, args->n_drives); + g_assert((0 < ret) && (ret <= sizeof(part))); + args->argc = append_arg(args->argc, args->argv, ARGV_SIZE, g_strdup(part)); + args->n_drives++; +} + +static void add_ide_disk(TestArgs *args, + int drive_idx, int bus, int unit, int c, int h, int s) +{ + char part[300]; + int ret; + + ret = snprintf(part, sizeof(part), + "-device ide-hd,drive=disk%d,bus=ide.%d,unit=%d," + "lcyls=%d,lheads=%d,lsecs=%d", + drive_idx, bus, unit, c, h, s); + g_assert((0 < ret) && (ret <= sizeof(part))); + args->argc = append_arg(args->argc, args->argv, ARGV_SIZE, g_strdup(part)); +} + +static void add_scsi_controller(TestArgs *args, + const char *type, + const char *bus, + int addr) +{ + char part[300]; + int ret; + + ret = snprintf(part, sizeof(part), + "-device %s,id=scsi%d,bus=%s,addr=%d", + type, args->n_scsi_controllers, bus, addr); + g_assert((0 < ret) && (ret <= sizeof(part))); + args->argc = append_arg(args->argc, args->argv, ARGV_SIZE, g_strdup(part)); + args->n_scsi_controllers++; +} + +static void add_scsi_disk(TestArgs *args, + int drive_idx, int bus, + int channel, int scsi_id, int lun, + int c, int h, int s) +{ + char part[300]; + int ret; + + ret = snprintf(part, sizeof(part), + "-device scsi-hd,id=scsi-disk%d,drive=disk%d," + "bus=scsi%d.0," + "channel=%d,scsi-id=%d,lun=%d," + "lcyls=%d,lheads=%d,lsecs=%d", + args->n_scsi_disks, drive_idx, bus, channel, scsi_id, lun, + c, h, s); + g_assert((0 < ret) && (ret <= sizeof(part))); + args->argc = append_arg(args->argc, args->argv, ARGV_SIZE, g_strdup(part)); + args->n_scsi_disks++; +} + +static void add_virtio_disk(TestArgs *args, + int drive_idx, const char *bus, int addr, + int c, int h, int s) +{ + char part[300]; + int ret; + + ret = snprintf(part, sizeof(part), + "-device virtio-blk-pci,id=virtio-disk%d," + "drive=disk%d,bus=%s,addr=%d," + "lcyls=%d,lheads=%d,lsecs=%d", + args->n_virtio_disks, drive_idx, bus, addr, c, h, s); + g_assert((0 < ret) && (ret <= sizeof(part))); + args->argc = append_arg(args->argc, args->argv, ARGV_SIZE, g_strdup(part)); + args->n_virtio_disks++; +} + +static void test_override(TestArgs *args, CHSResult expected[]) +{ + char *joined_args; + QFWCFG *fw_cfg; + int i; + + joined_args = g_strjoinv(" ", args->argv); + + qtest_start(joined_args); + fw_cfg = pc_fw_cfg_init(global_qtest); + + read_bootdevices(fw_cfg, expected); + + g_free(joined_args); + qtest_end(); + + g_free(fw_cfg); + + for (i = 0; i < args->n_drives; i++) { + unlink(args->drives[i]); + free(args->drives[i]); + } + g_free(args->drives); + g_strfreev(args->argv); + g_free(args); +} + +static void test_override_ide(void) +{ + TestArgs *args = create_args(); + CHSResult expected[] = { + {"/pci@i0cf8/ide@1,1/drive@0/disk@0", 10000, 120, 30}, + {"/pci@i0cf8/ide@1,1/drive@0/disk@1", 9000, 120, 30}, + {"/pci@i0cf8/ide@1,1/drive@1/disk@0", 0, 1, 1}, + {"/pci@i0cf8/ide@1,1/drive@1/disk@1", 1, 0, 0}, + {NULL, 0, 0, 0} + }; + add_drive_with_mbr(args, empty_mbr, 1); + add_drive_with_mbr(args, empty_mbr, 1); + add_drive_with_mbr(args, empty_mbr, 1); + add_drive_with_mbr(args, empty_mbr, 1); + add_ide_disk(args, 0, 0, 0, 10000, 120, 30); + add_ide_disk(args, 1, 0, 1, 9000, 120, 30); + add_ide_disk(args, 2, 1, 0, 0, 1, 1); + add_ide_disk(args, 3, 1, 1, 1, 0, 0); + test_override(args, expected); +} + +static void test_override_scsi(void) +{ + TestArgs *args = create_args(); + CHSResult expected[] = { + {"/pci@i0cf8/scsi@3/channel@0/disk@0,0", 10000, 120, 30}, + {"/pci@i0cf8/scsi@3/channel@0/disk@1,0", 9000, 120, 30}, + {"/pci@i0cf8/scsi@3/channel@0/disk@2,0", 1, 0, 0}, + {"/pci@i0cf8/scsi@3/channel@0/disk@3,0", 0, 1, 0}, + {NULL, 0, 0, 0} + }; + add_drive_with_mbr(args, empty_mbr, 1); + add_drive_with_mbr(args, empty_mbr, 1); + add_drive_with_mbr(args, empty_mbr, 1); + add_drive_with_mbr(args, empty_mbr, 1); + add_scsi_controller(args, "lsi53c895a", "pci.0", 3); + add_scsi_disk(args, 0, 0, 0, 0, 0, 10000, 120, 30); + add_scsi_disk(args, 1, 0, 0, 1, 0, 9000, 120, 30); + add_scsi_disk(args, 2, 0, 0, 2, 0, 1, 0, 0); + add_scsi_disk(args, 3, 0, 0, 3, 0, 0, 1, 0); + test_override(args, expected); +} + +static void test_override_scsi_2_controllers(void) +{ + TestArgs *args = create_args(); + CHSResult expected[] = { + {"/pci@i0cf8/scsi@3/channel@0/disk@0,0", 10000, 120, 30}, + {"/pci@i0cf8/scsi@3/channel@0/disk@1,0", 9000, 120, 30}, + {"/pci@i0cf8/scsi@4/channel@0/disk@0,1", 1, 0, 0}, + {"/pci@i0cf8/scsi@4/channel@0/disk@1,2", 0, 1, 0}, + {NULL, 0, 0, 0} + }; + add_drive_with_mbr(args, empty_mbr, 1); + add_drive_with_mbr(args, empty_mbr, 1); + add_drive_with_mbr(args, empty_mbr, 1); + add_drive_with_mbr(args, empty_mbr, 1); + add_scsi_controller(args, "lsi53c895a", "pci.0", 3); + add_scsi_controller(args, "virtio-scsi-pci", "pci.0", 4); + add_scsi_disk(args, 0, 0, 0, 0, 0, 10000, 120, 30); + add_scsi_disk(args, 1, 0, 0, 1, 0, 9000, 120, 30); + add_scsi_disk(args, 2, 1, 0, 0, 1, 1, 0, 0); + add_scsi_disk(args, 3, 1, 0, 1, 2, 0, 1, 0); + test_override(args, expected); +} + +static void test_override_virtio_blk(void) +{ + TestArgs *args = create_args(); + CHSResult expected[] = { + {"/pci@i0cf8/scsi@3/disk@0,0", 10000, 120, 30}, + {"/pci@i0cf8/scsi@4/disk@0,0", 9000, 120, 30}, + {NULL, 0, 0, 0} + }; + add_drive_with_mbr(args, empty_mbr, 1); + add_drive_with_mbr(args, empty_mbr, 1); + add_virtio_disk(args, 0, "pci.0", 3, 10000, 120, 30); + add_virtio_disk(args, 1, "pci.0", 4, 9000, 120, 30); + test_override(args, expected); +} + +static void test_override_zero_chs(void) +{ + TestArgs *args = create_args(); + CHSResult expected[] = { + {NULL, 0, 0, 0} + }; + add_drive_with_mbr(args, empty_mbr, 1); + add_ide_disk(args, 0, 1, 1, 0, 0, 0); + test_override(args, expected); +} + +static void test_override_scsi_hot_unplug(void) +{ + char *joined_args; + QFWCFG *fw_cfg; + QDict *response; + int i; + TestArgs *args = create_args(); + CHSResult expected[] = { + {"/pci@i0cf8/scsi@2/channel@0/disk@0,0", 10000, 120, 30}, + {"/pci@i0cf8/scsi@2/channel@0/disk@1,0", 20, 20, 20}, + {NULL, 0, 0, 0} + }; + CHSResult expected2[] = { + {"/pci@i0cf8/scsi@2/channel@0/disk@1,0", 20, 20, 20}, + {NULL, 0, 0, 0} + }; + add_drive_with_mbr(args, empty_mbr, 1); + add_drive_with_mbr(args, empty_mbr, 1); + add_scsi_controller(args, "virtio-scsi-pci", "pci.0", 2); + add_scsi_disk(args, 0, 0, 0, 0, 0, 10000, 120, 30); + add_scsi_disk(args, 1, 0, 0, 1, 0, 20, 20, 20); + + joined_args = g_strjoinv(" ", args->argv); + + qtest_start(joined_args); + fw_cfg = pc_fw_cfg_init(global_qtest); + + read_bootdevices(fw_cfg, expected); + + /* unplug device an restart */ + response = qmp("{ 'execute': 'device_del'," + " 'arguments': {'id': 'scsi-disk0' }}"); + g_assert(response); + g_assert(!qdict_haskey(response, "error")); + qobject_unref(response); + response = qmp("{ 'execute': 'system_reset', 'arguments': { }}"); + g_assert(response); + g_assert(!qdict_haskey(response, "error")); + qobject_unref(response); + + qtest_qmp_eventwait(global_qtest, "RESET"); + + read_bootdevices(fw_cfg, expected2); + + g_free(joined_args); + qtest_end(); + + g_free(fw_cfg); + + for (i = 0; i < args->n_drives; i++) { + unlink(args->drives[i]); + free(args->drives[i]); + } + g_free(args->drives); + g_strfreev(args->argv); + g_free(args); +} + +static void test_override_virtio_hot_unplug(void) +{ + char *joined_args; + QFWCFG *fw_cfg; + QDict *response; + int i; + TestArgs *args = create_args(); + CHSResult expected[] = { + {"/pci@i0cf8/scsi@2/disk@0,0", 10000, 120, 30}, + {"/pci@i0cf8/scsi@3/disk@0,0", 20, 20, 20}, + {NULL, 0, 0, 0} + }; + CHSResult expected2[] = { + {"/pci@i0cf8/scsi@3/disk@0,0", 20, 20, 20}, + {NULL, 0, 0, 0} + }; + add_drive_with_mbr(args, empty_mbr, 1); + add_drive_with_mbr(args, empty_mbr, 1); + add_virtio_disk(args, 0, "pci.0", 2, 10000, 120, 30); + add_virtio_disk(args, 1, "pci.0", 3, 20, 20, 20); + + joined_args = g_strjoinv(" ", args->argv); + + qtest_start(joined_args); + fw_cfg = pc_fw_cfg_init(global_qtest); + + read_bootdevices(fw_cfg, expected); + + /* unplug device an restart */ + response = qmp("{ 'execute': 'device_del'," + " 'arguments': {'id': 'virtio-disk0' }}"); + g_assert(response); + g_assert(!qdict_haskey(response, "error")); + qobject_unref(response); + response = qmp("{ 'execute': 'system_reset', 'arguments': { }}"); + g_assert(response); + g_assert(!qdict_haskey(response, "error")); + qobject_unref(response); + + qtest_qmp_eventwait(global_qtest, "RESET"); + + read_bootdevices(fw_cfg, expected2); + + g_free(joined_args); + qtest_end(); + + g_free(fw_cfg); + + for (i = 0; i < args->n_drives; i++) { + unlink(args->drives[i]); + free(args->drives[i]); + } + g_free(args->drives); + g_strfreev(args->argv); + g_free(args); +} + int main(int argc, char **argv) { Backend i; @@ -XXX,XX +XXX,XX @@ int main(int argc, char **argv) qtest_add_func("hd-geo/ide/device/mbr/chs", test_ide_device_mbr_chs); qtest_add_func("hd-geo/ide/device/user/chs", test_ide_device_user_chs); qtest_add_func("hd-geo/ide/device/user/chst", test_ide_device_user_chst); + qtest_add_func("hd-geo/override/ide", test_override_ide); + qtest_add_func("hd-geo/override/scsi", test_override_scsi); + qtest_add_func("hd-geo/override/scsi_2_controllers", + test_override_scsi_2_controllers); + qtest_add_func("hd-geo/override/virtio_blk", test_override_virtio_blk); + qtest_add_func("hd-geo/override/zero_chs", test_override_zero_chs); + qtest_add_func("hd-geo/override/scsi_hot_unplug", + test_override_scsi_hot_unplug); + qtest_add_func("hd-geo/override/virtio_hot_unplug", + test_override_virtio_hot_unplug); ret = g_test_run(); -- 2.13.3 _______________________________________________ SeaBIOS mailing list -- seabios@seabios.org To unsubscribe send an email to seabios-leave@seabios.org v1: Non-standard logical geometries break under QEMU. A virtual disk which contains an operating system which depends on logical geometries (consistent values being reported from BIOS INT13 AH=08) will most likely break under QEMU/SeaBIOS if it has non-standard logical geometries - for example 56 SPT (sectors per track). No matter what QEMU will guess - SeaBIOS, for large enough disks - will use LBA translation, which will report 63 SPT instead. In addition we can not enforce SeaBIOS to rely on phyiscal geometries at all. A virtio-blk-pci virtual disk with 255 phyiscal heads can not report more than 16 physical heads when moved to an IDE controller, the ATA spec allows a maximum of 16 heads - this is an artifact of virtualization. By supplying the logical geometies directly we are able to support such "exotic" disks. We will use fw_cfg to do just that. v2: Fix missing parenthesis check in "hd-geo-test: Add tests for lchs override" v3: * Rename fw_cfg key to "bios-geometry". * Remove "extendible" interface. * Add cpu_to_le32 fix as Laszlo suggested or big endian hosts * Fix last qtest commit - automatic docker tester for some reason does not have qemu-img set v4: * Change fw_cfg interface from mixed textual/binary to textual only v5: * Fix line > 80 chars in tests/hd-geo-test.c v6: * Small fixes for issues pointed by Max * (&conf->conf)->lcyls to conf->conf.lcyls and so on * Remove scsi_unrealize from everything other than scsi-hd * Add proper include to sysemu.h * scsi_device_unrealize() after scsi_device_purge_requests() v7: * Adapted last commit (tests) to changes in qtest Sam Eiderman (8): block: Refactor macros - fix tabbing block: Support providing LCHS from user bootdevice: Add interface to gather LCHS scsi: Propagate unrealize() callback to scsi-hd bootdevice: Gather LCHS from all relevant devices bootdevice: Refactor get_boot_devices_list bootdevice: FW_CFG interface for LCHS values hd-geo-test: Add tests for lchs override bootdevice.c | 148 ++++++++-- hw/block/virtio-blk.c | 6 + hw/ide/qdev.c | 7 +- hw/nvram/fw_cfg.c | 14 +- hw/scsi/scsi-bus.c | 16 ++ hw/scsi/scsi-disk.c | 12 + include/hw/block/block.h | 22 +- include/hw/scsi/scsi.h | 1 + include/sysemu/sysemu.h | 4 + tests/Makefile.include | 2 +- tests/hd-geo-test.c | 589 +++++++++++++++++++++++++++++++++++++++ 11 files changed, 780 insertions(+), 41 deletions(-) -- 2.23.0.351.gc4317032e6-goog From: Sam Eiderman <shmuel.eiderman@oracle.com> Fixing tabbing in block related macros. Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com> Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com> Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com> --- hw/ide/qdev.c | 2 +- include/hw/block/block.h | 16 ++++++++-------- 2 files changed, 9 insertions(+), 9 deletions(-) diff --git a/hw/ide/qdev.c b/hw/ide/qdev.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ide/qdev.c +++ b/hw/ide/qdev.c @@ -XXX,XX +XXX,XX @@ static void ide_drive_realize(IDEDevice *dev, Error **errp) DEFINE_BLOCK_PROPERTIES(IDEDrive, dev.conf), \ DEFINE_BLOCK_ERROR_PROPERTIES(IDEDrive, dev.conf), \ DEFINE_PROP_STRING("ver", IDEDrive, dev.version), \ - DEFINE_PROP_UINT64("wwn", IDEDrive, dev.wwn, 0), \ + DEFINE_PROP_UINT64("wwn", IDEDrive, dev.wwn, 0), \ DEFINE_PROP_STRING("serial", IDEDrive, dev.serial),\ DEFINE_PROP_STRING("model", IDEDrive, dev.model) diff --git a/include/hw/block/block.h b/include/hw/block/block.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/block/block.h +++ b/include/hw/block/block.h @@ -XXX,XX +XXX,XX @@ static inline unsigned int get_physical_block_exp(BlockConf *conf) _conf.logical_block_size), \ DEFINE_PROP_BLOCKSIZE("physical_block_size", _state, \ _conf.physical_block_size), \ - DEFINE_PROP_UINT16("min_io_size", _state, _conf.min_io_size, 0), \ + DEFINE_PROP_UINT16("min_io_size", _state, _conf.min_io_size, 0), \ DEFINE_PROP_UINT32("opt_io_size", _state, _conf.opt_io_size, 0), \ - DEFINE_PROP_UINT32("discard_granularity", _state, \ - _conf.discard_granularity, -1), \ - DEFINE_PROP_ON_OFF_AUTO("write-cache", _state, _conf.wce, \ - ON_OFF_AUTO_AUTO), \ + DEFINE_PROP_UINT32("discard_granularity", _state, \ + _conf.discard_granularity, -1), \ + DEFINE_PROP_ON_OFF_AUTO("write-cache", _state, _conf.wce, \ + ON_OFF_AUTO_AUTO), \ DEFINE_PROP_BOOL("share-rw", _state, _conf.share_rw, false) #define DEFINE_BLOCK_PROPERTIES(_state, _conf) \ DEFINE_PROP_DRIVE("drive", _state, _conf.blk), \ DEFINE_BLOCK_PROPERTIES_BASE(_state, _conf) -#define DEFINE_BLOCK_CHS_PROPERTIES(_state, _conf) \ - DEFINE_PROP_UINT32("cyls", _state, _conf.cyls, 0), \ - DEFINE_PROP_UINT32("heads", _state, _conf.heads, 0), \ +#define DEFINE_BLOCK_CHS_PROPERTIES(_state, _conf) \ + DEFINE_PROP_UINT32("cyls", _state, _conf.cyls, 0), \ + DEFINE_PROP_UINT32("heads", _state, _conf.heads, 0), \ DEFINE_PROP_UINT32("secs", _state, _conf.secs, 0) #define DEFINE_BLOCK_ERROR_PROPERTIES(_state, _conf) \ -- 2.23.0.351.gc4317032e6-goog From: Sam Eiderman <shmuel.eiderman@oracle.com> Add logical geometry variables to BlockConf. A user can now supply "lcyls", "lheads" & "lsecs" for any HD device that supports CHS ("cyls", "heads", "secs"). These devices include: * ide-hd * scsi-hd * virtio-blk-pci In future commits we will use the provided LCHS and pass it to the BIOS through fw_cfg to be supplied using INT13 routines. Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com> Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com> Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com> --- include/hw/block/block.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/include/hw/block/block.h b/include/hw/block/block.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/block/block.h +++ b/include/hw/block/block.h @@ -XXX,XX +XXX,XX @@ typedef struct BlockConf { uint32_t discard_granularity; /* geometry, not all devices use this */ uint32_t cyls, heads, secs; + uint32_t lcyls, lheads, lsecs; OnOffAuto wce; bool share_rw; BlockdevOnError rerror; @@ -XXX,XX +XXX,XX @@ static inline unsigned int get_physical_block_exp(BlockConf *conf) #define DEFINE_BLOCK_CHS_PROPERTIES(_state, _conf) \ DEFINE_PROP_UINT32("cyls", _state, _conf.cyls, 0), \ DEFINE_PROP_UINT32("heads", _state, _conf.heads, 0), \ - DEFINE_PROP_UINT32("secs", _state, _conf.secs, 0) + DEFINE_PROP_UINT32("secs", _state, _conf.secs, 0), \ + DEFINE_PROP_UINT32("lcyls", _state, _conf.lcyls, 0), \ + DEFINE_PROP_UINT32("lheads", _state, _conf.lheads, 0), \ + DEFINE_PROP_UINT32("lsecs", _state, _conf.lsecs, 0) #define DEFINE_BLOCK_ERROR_PROPERTIES(_state, _conf) \ DEFINE_PROP_BLOCKDEV_ON_ERROR("rerror", _state, _conf.rerror, \ -- 2.23.0.351.gc4317032e6-goog From: Sam Eiderman <shmuel.eiderman@oracle.com> Add an interface to provide direct logical CHS values for boot devices. We will use this interface in the next commits. Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com> Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com> Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com> --- bootdevice.c | 55 +++++++++++++++++++++++++++++++++++++++++ include/sysemu/sysemu.h | 3 +++ 2 files changed, 58 insertions(+) diff --git a/bootdevice.c b/bootdevice.c index XXXXXXX..XXXXXXX 100644 --- a/bootdevice.c +++ b/bootdevice.c @@ -XXX,XX +XXX,XX @@ void device_add_bootindex_property(Object *obj, int32_t *bootindex, /* initialize devices' bootindex property to -1 */ object_property_set_int(obj, -1, name, NULL); } + +typedef struct FWLCHSEntry FWLCHSEntry; + +struct FWLCHSEntry { + QTAILQ_ENTRY(FWLCHSEntry) link; + DeviceState *dev; + char *suffix; + uint32_t lcyls; + uint32_t lheads; + uint32_t lsecs; +}; + +static QTAILQ_HEAD(, FWLCHSEntry) fw_lchs = + QTAILQ_HEAD_INITIALIZER(fw_lchs); + +void add_boot_device_lchs(DeviceState *dev, const char *suffix, + uint32_t lcyls, uint32_t lheads, uint32_t lsecs) +{ + FWLCHSEntry *node; + + if (!lcyls && !lheads && !lsecs) { + return; + } + + assert(dev != NULL || suffix != NULL); + + node = g_malloc0(sizeof(FWLCHSEntry)); + node->suffix = g_strdup(suffix); + node->dev = dev; + node->lcyls = lcyls; + node->lheads = lheads; + node->lsecs = lsecs; + + QTAILQ_INSERT_TAIL(&fw_lchs, node, link); +} + +void del_boot_device_lchs(DeviceState *dev, const char *suffix) +{ + FWLCHSEntry *i; + + if (dev == NULL) { + return; + } + + QTAILQ_FOREACH(i, &fw_lchs, link) { + if ((!suffix || !g_strcmp0(i->suffix, suffix)) && + i->dev == dev) { + QTAILQ_REMOVE(&fw_lchs, i, link); + g_free(i->suffix); + g_free(i); + + break; + } + } +} diff --git a/include/sysemu/sysemu.h b/include/sysemu/sysemu.h index XXXXXXX..XXXXXXX 100644 --- a/include/sysemu/sysemu.h +++ b/include/sysemu/sysemu.h @@ -XXX,XX +XXX,XX @@ void device_add_bootindex_property(Object *obj, int32_t *bootindex, DeviceState *dev, Error **errp); void restore_boot_order(void *opaque); void validate_bootdevices(const char *devices, Error **errp); +void add_boot_device_lchs(DeviceState *dev, const char *suffix, + uint32_t lcyls, uint32_t lheads, uint32_t lsecs); +void del_boot_device_lchs(DeviceState *dev, const char *suffix); /* handler to set the boot_device order for a specific type of MachineClass */ typedef void QEMUBootSetHandler(void *opaque, const char *boot_order, -- 2.23.0.351.gc4317032e6-goog From: Sam Eiderman <shmuel.eiderman@oracle.com> We will need to add LCHS removal logic to scsi-hd's unrealize() in the next commit. Signed-off-by: Sam Eiderman <sameid@google.com> Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com> Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com> Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com> --- hw/scsi/scsi-bus.c | 16 ++++++++++++++++ include/hw/scsi/scsi.h | 1 + 2 files changed, 17 insertions(+) diff --git a/hw/scsi/scsi-bus.c b/hw/scsi/scsi-bus.c index XXXXXXX..XXXXXXX 100644 --- a/hw/scsi/scsi-bus.c +++ b/hw/scsi/scsi-bus.c @@ -XXX,XX +XXX,XX @@ static void scsi_device_realize(SCSIDevice *s, Error **errp) } } +static void scsi_device_unrealize(SCSIDevice *s, Error **errp) +{ + SCSIDeviceClass *sc = SCSI_DEVICE_GET_CLASS(s); + if (sc->unrealize) { + sc->unrealize(s, errp); + } +} + int scsi_bus_parse_cdb(SCSIDevice *dev, SCSICommand *cmd, uint8_t *buf, void *hba_private) { @@ -XXX,XX +XXX,XX @@ static void scsi_qdev_realize(DeviceState *qdev, Error **errp) static void scsi_qdev_unrealize(DeviceState *qdev, Error **errp) { SCSIDevice *dev = SCSI_DEVICE(qdev); + Error *local_err = NULL; if (dev->vmsentry) { qemu_del_vm_change_state_handler(dev->vmsentry); } scsi_device_purge_requests(dev, SENSE_CODE(NO_SENSE)); + + scsi_device_unrealize(dev, &local_err); + if (local_err) { + error_propagate(errp, local_err); + return; + } + blockdev_mark_auto_del(dev->conf.blk); } diff --git a/include/hw/scsi/scsi.h b/include/hw/scsi/scsi.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/scsi/scsi.h +++ b/include/hw/scsi/scsi.h @@ -XXX,XX +XXX,XX @@ struct SCSIRequest { typedef struct SCSIDeviceClass { DeviceClass parent_class; void (*realize)(SCSIDevice *dev, Error **errp); + void (*unrealize)(SCSIDevice *dev, Error **errp); int (*parse_cdb)(SCSIDevice *dev, SCSICommand *cmd, uint8_t *buf, void *hba_private); SCSIRequest *(*alloc_req)(SCSIDevice *s, uint32_t tag, uint32_t lun, -- 2.23.0.351.gc4317032e6-goog From: Sam Eiderman <shmuel.eiderman@oracle.com> Relevant devices are: * ide-hd (and ide-cd, ide-drive) * scsi-hd (and scsi-cd, scsi-disk, scsi-block) * virtio-blk-pci We do not call del_boot_device_lchs() for ide-* since we don't need to - IDE block devices do not support unplugging. Signed-off-by: Sam Eiderman <sameid@google.com> Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com> Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com> Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com> --- hw/block/virtio-blk.c | 6 ++++++ hw/ide/qdev.c | 5 +++++ hw/scsi/scsi-disk.c | 12 ++++++++++++ 3 files changed, 23 insertions(+) diff --git a/hw/block/virtio-blk.c b/hw/block/virtio-blk.c index XXXXXXX..XXXXXXX 100644 --- a/hw/block/virtio-blk.c +++ b/hw/block/virtio-blk.c @@ -XXX,XX +XXX,XX @@ static void virtio_blk_device_realize(DeviceState *dev, Error **errp) blk_set_guest_block_size(s->blk, s->conf.conf.logical_block_size); blk_iostatus_enable(s->blk); + + add_boot_device_lchs(dev, "/disk@0,0", + conf->conf.lcyls, + conf->conf.lheads, + conf->conf.lsecs); } static void virtio_blk_device_unrealize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void virtio_blk_device_unrealize(DeviceState *dev, Error **errp) VirtIODevice *vdev = VIRTIO_DEVICE(dev); VirtIOBlock *s = VIRTIO_BLK(dev); + del_boot_device_lchs(dev, "/disk@0,0"); virtio_blk_data_plane_destroy(s->dataplane); s->dataplane = NULL; qemu_del_vm_change_state_handler(s->change); diff --git a/hw/ide/qdev.c b/hw/ide/qdev.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ide/qdev.c +++ b/hw/ide/qdev.c @@ -XXX,XX +XXX,XX @@ static void ide_dev_initfn(IDEDevice *dev, IDEDriveKind kind, Error **errp) add_boot_device_path(dev->conf.bootindex, &dev->qdev, dev->unit ? "/disk@1" : "/disk@0"); + + add_boot_device_lchs(&dev->qdev, dev->unit ? "/disk@1" : "/disk@0", + dev->conf.lcyls, + dev->conf.lheads, + dev->conf.lsecs); } static void ide_dev_get_bootindex(Object *obj, Visitor *v, const char *name, diff --git a/hw/scsi/scsi-disk.c b/hw/scsi/scsi-disk.c index XXXXXXX..XXXXXXX 100644 --- a/hw/scsi/scsi-disk.c +++ b/hw/scsi/scsi-disk.c @@ -XXX,XX +XXX,XX @@ #include "hw/block/block.h" #include "hw/qdev-properties.h" #include "sysemu/dma.h" +#include "sysemu/sysemu.h" #include "qemu/cutils.h" #include "trace.h" @@ -XXX,XX +XXX,XX @@ static void scsi_realize(SCSIDevice *dev, Error **errp) blk_set_guest_block_size(s->qdev.conf.blk, s->qdev.blocksize); blk_iostatus_enable(s->qdev.conf.blk); + + add_boot_device_lchs(&dev->qdev, NULL, + dev->conf.lcyls, + dev->conf.lheads, + dev->conf.lsecs); +} + +static void scsi_unrealize(SCSIDevice *dev, Error **errp) +{ + del_boot_device_lchs(&dev->qdev, NULL); } static void scsi_hd_realize(SCSIDevice *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void scsi_hd_class_initfn(ObjectClass *klass, void *data) SCSIDeviceClass *sc = SCSI_DEVICE_CLASS(klass); sc->realize = scsi_hd_realize; + sc->unrealize = scsi_unrealize; sc->alloc_req = scsi_new_request; sc->unit_attention_reported = scsi_disk_unit_attention_reported; dc->desc = "virtual SCSI disk"; -- 2.23.0.351.gc4317032e6-goog From: Sam Eiderman <shmuel.eiderman@oracle.com> Move device name construction to a separate function. We will reuse this function in the following commit to pass logical CHS parameters through fw_cfg much like we currently pass bootindex. Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com> Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com> Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com> --- bootdevice.c | 61 +++++++++++++++++++++++++++++----------------------- 1 file changed, 34 insertions(+), 27 deletions(-) diff --git a/bootdevice.c b/bootdevice.c index XXXXXXX..XXXXXXX 100644 --- a/bootdevice.c +++ b/bootdevice.c @@ -XXX,XX +XXX,XX @@ DeviceState *get_boot_device(uint32_t position) return res; } +static char *get_boot_device_path(DeviceState *dev, bool ignore_suffixes, + char *suffix) +{ + char *devpath = NULL, *s = NULL, *d, *bootpath; + + if (dev) { + devpath = qdev_get_fw_dev_path(dev); + assert(devpath); + } + + if (!ignore_suffixes) { + if (dev) { + d = qdev_get_own_fw_dev_path_from_handler(dev->parent_bus, dev); + if (d) { + assert(!suffix); + s = d; + } else { + s = g_strdup(suffix); + } + } else { + s = g_strdup(suffix); + } + } + + bootpath = g_strdup_printf("%s%s", + devpath ? devpath : "", + s ? s : ""); + g_free(devpath); + g_free(s); + + return bootpath; +} + /* * This function returns null terminated string that consist of new line * separated device paths. @@ -XXX,XX +XXX,XX @@ char *get_boot_devices_list(size_t *size) bool ignore_suffixes = mc->ignore_boot_device_suffixes; QTAILQ_FOREACH(i, &fw_boot_order, link) { - char *devpath = NULL, *suffix = NULL; char *bootpath; - char *d; size_t len; - if (i->dev) { - devpath = qdev_get_fw_dev_path(i->dev); - assert(devpath); - } - - if (!ignore_suffixes) { - if (i->dev) { - d = qdev_get_own_fw_dev_path_from_handler(i->dev->parent_bus, - i->dev); - if (d) { - assert(!i->suffix); - suffix = d; - } else { - suffix = g_strdup(i->suffix); - } - } else { - suffix = g_strdup(i->suffix); - } - } - - bootpath = g_strdup_printf("%s%s", - devpath ? devpath : "", - suffix ? suffix : ""); - g_free(devpath); - g_free(suffix); + bootpath = get_boot_device_path(i->dev, ignore_suffixes, i->suffix); if (total) { list[total-1] = '\n'; -- 2.23.0.351.gc4317032e6-goog From: Sam Eiderman <shmuel.eiderman@oracle.com> Using fw_cfg, supply logical CHS values directly from QEMU to the BIOS. Non-standard logical geometries break under QEMU. A virtual disk which contains an operating system which depends on logical geometries (consistent values being reported from BIOS INT13 AH=08) will most likely break under QEMU/SeaBIOS if it has non-standard logical geometries - for example 56 SPT (sectors per track). No matter what QEMU will report - SeaBIOS, for large enough disks - will use LBA translation, which will report 63 SPT instead. In addition we cannot force SeaBIOS to rely on physical geometries at all. A virtio-blk-pci virtual disk with 255 phyiscal heads cannot report more than 16 physical heads when moved to an IDE controller, since the ATA spec allows a maximum of 16 heads - this is an artifact of virtualization. By supplying the logical geometries directly we are able to support such "exotic" disks. We serialize this information in a similar way to the "bootorder" interface. The new fw_cfg entry is "bios-geometry". Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com> Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com> Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com> --- bootdevice.c | 32 ++++++++++++++++++++++++++++++++ hw/nvram/fw_cfg.c | 14 +++++++++++--- include/sysemu/sysemu.h | 1 + 3 files changed, 44 insertions(+), 3 deletions(-) diff --git a/bootdevice.c b/bootdevice.c index XXXXXXX..XXXXXXX 100644 --- a/bootdevice.c +++ b/bootdevice.c @@ -XXX,XX +XXX,XX @@ void del_boot_device_lchs(DeviceState *dev, const char *suffix) } } } + +/* Serialized as: (device name\0 + lchs struct) x devices */ +char *get_boot_devices_lchs_list(size_t *size) +{ + FWLCHSEntry *i; + size_t total = 0; + char *list = NULL; + + QTAILQ_FOREACH(i, &fw_lchs, link) { + char *bootpath; + char *chs_string; + size_t len; + + bootpath = get_boot_device_path(i->dev, false, i->suffix); + chs_string = g_strdup_printf("%s %" PRIu32 " %" PRIu32 " %" PRIu32, + bootpath, i->lcyls, i->lheads, i->lsecs); + + if (total) { + list[total - 1] = '\n'; + } + len = strlen(chs_string) + 1; + list = g_realloc(list, total + len); + memcpy(&list[total], chs_string, len); + total += len; + g_free(chs_string); + g_free(bootpath); + } + + *size = total; + + return list; +} diff --git a/hw/nvram/fw_cfg.c b/hw/nvram/fw_cfg.c index XXXXXXX..XXXXXXX 100644 --- a/hw/nvram/fw_cfg.c +++ b/hw/nvram/fw_cfg.c @@ -XXX,XX +XXX,XX @@ void *fw_cfg_modify_file(FWCfgState *s, const char *filename, static void fw_cfg_machine_reset(void *opaque) { + MachineClass *mc = MACHINE_GET_CLASS(qdev_get_machine()); + FWCfgState *s = opaque; void *ptr; size_t len; - FWCfgState *s = opaque; - char *bootindex = get_boot_devices_list(&len); + char *buf; - ptr = fw_cfg_modify_file(s, "bootorder", (uint8_t *)bootindex, len); + buf = get_boot_devices_list(&len); + ptr = fw_cfg_modify_file(s, "bootorder", (uint8_t *)buf, len); g_free(ptr); + + if (!mc->legacy_fw_cfg_order) { + buf = get_boot_devices_lchs_list(&len); + ptr = fw_cfg_modify_file(s, "bios-geometry", (uint8_t *)buf, len); + g_free(ptr); + } } static void fw_cfg_machine_ready(struct Notifier *n, void *data) diff --git a/include/sysemu/sysemu.h b/include/sysemu/sysemu.h index XXXXXXX..XXXXXXX 100644 --- a/include/sysemu/sysemu.h +++ b/include/sysemu/sysemu.h @@ -XXX,XX +XXX,XX @@ void validate_bootdevices(const char *devices, Error **errp); void add_boot_device_lchs(DeviceState *dev, const char *suffix, uint32_t lcyls, uint32_t lheads, uint32_t lsecs); void del_boot_device_lchs(DeviceState *dev, const char *suffix); +char *get_boot_devices_lchs_list(size_t *size); /* handler to set the boot_device order for a specific type of MachineClass */ typedef void QEMUBootSetHandler(void *opaque, const char *boot_order, -- 2.23.0.351.gc4317032e6-goog From: Sam Eiderman <shmuel.eiderman@oracle.com> Add QTest tests to check the logical geometry override option. The tests in hd-geo-test are out of date - they only test IDE and do not test interesting MBRs. I added a few helper functions which will make adding more tests easier. QTest's fw_cfg helper functions support only legacy fw_cfg, so I had to read the new fw_cfg layout on my own. Creating qcow2 disks with specific size and MBR layout is currently unused - we only use a default empty MBR. Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com> Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com> Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com> --- tests/Makefile.include | 2 +- tests/hd-geo-test.c | 589 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 590 insertions(+), 1 deletion(-) diff --git a/tests/Makefile.include b/tests/Makefile.include index XXXXXXX..XXXXXXX 100644 --- a/tests/Makefile.include +++ b/tests/Makefile.include @@ -XXX,XX +XXX,XX @@ tests/ide-test$(EXESUF): tests/ide-test.o $(libqos-pc-obj-y) tests/ahci-test$(EXESUF): tests/ahci-test.o $(libqos-pc-obj-y) qemu-img$(EXESUF) tests/ipmi-kcs-test$(EXESUF): tests/ipmi-kcs-test.o tests/ipmi-bt-test$(EXESUF): tests/ipmi-bt-test.o -tests/hd-geo-test$(EXESUF): tests/hd-geo-test.o +tests/hd-geo-test$(EXESUF): tests/hd-geo-test.o $(libqos-obj-y) tests/boot-order-test$(EXESUF): tests/boot-order-test.o $(libqos-obj-y) tests/boot-serial-test$(EXESUF): tests/boot-serial-test.o $(libqos-obj-y) tests/bios-tables-test$(EXESUF): tests/bios-tables-test.o \ diff --git a/tests/hd-geo-test.c b/tests/hd-geo-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/hd-geo-test.c +++ b/tests/hd-geo-test.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qemu-common.h" +#include "qemu/bswap.h" +#include "qapi/qmp/qlist.h" #include "libqtest.h" +#include "libqos/fw_cfg.h" +#include "libqos/libqos.h" +#include "standard-headers/linux/qemu_fw_cfg.h" #define ARGV_SIZE 256 @@ -XXX,XX +XXX,XX @@ static void test_ide_drive_cd_0(void) qtest_quit(qts); } +typedef struct { + bool active; + uint32_t head; + uint32_t sector; + uint32_t cyl; + uint32_t end_head; + uint32_t end_sector; + uint32_t end_cyl; + uint32_t start_sect; + uint32_t nr_sects; +} MBRpartitions[4]; + +static MBRpartitions empty_mbr = { {false, 0, 0, 0, 0, 0, 0, 0, 0}, + {false, 0, 0, 0, 0, 0, 0, 0, 0}, + {false, 0, 0, 0, 0, 0, 0, 0, 0}, + {false, 0, 0, 0, 0, 0, 0, 0, 0} }; + +static char *create_qcow2_with_mbr(MBRpartitions mbr, uint64_t sectors) +{ + const char *template = "/tmp/qtest.XXXXXX"; + char *raw_path = strdup(template); + char *qcow2_path = strdup(template); + char cmd[100 + 2 * PATH_MAX]; + uint8_t buf[512]; + int i, ret, fd, offset; + uint64_t qcow2_size = sectors * 512; + uint8_t status, parttype, head, sector, cyl; + char *qemu_img_path; + char *qemu_img_abs_path; + + offset = 0xbe; + + for (i = 0; i < 4; i++) { + status = mbr[i].active ? 0x80 : 0x00; + g_assert(mbr[i].head < 256); + g_assert(mbr[i].sector < 64); + g_assert(mbr[i].cyl < 1024); + head = mbr[i].head; + sector = mbr[i].sector + ((mbr[i].cyl & 0x300) >> 2); + cyl = mbr[i].cyl & 0xff; + + buf[offset + 0x0] = status; + buf[offset + 0x1] = head; + buf[offset + 0x2] = sector; + buf[offset + 0x3] = cyl; + + parttype = 0; + g_assert(mbr[i].end_head < 256); + g_assert(mbr[i].end_sector < 64); + g_assert(mbr[i].end_cyl < 1024); + head = mbr[i].end_head; + sector = mbr[i].end_sector + ((mbr[i].end_cyl & 0x300) >> 2); + cyl = mbr[i].end_cyl & 0xff; + + buf[offset + 0x4] = parttype; + buf[offset + 0x5] = head; + buf[offset + 0x6] = sector; + buf[offset + 0x7] = cyl; + + (*(uint32_t *)&buf[offset + 0x8]) = cpu_to_le32(mbr[i].start_sect); + (*(uint32_t *)&buf[offset + 0xc]) = cpu_to_le32(mbr[i].nr_sects); + + offset += 0x10; + } + + fd = mkstemp(raw_path); + g_assert(fd); + close(fd); + + fd = open(raw_path, O_WRONLY); + g_assert(fd >= 0); + ret = write(fd, buf, sizeof(buf)); + g_assert(ret == sizeof(buf)); + close(fd); + + fd = mkstemp(qcow2_path); + g_assert(fd); + close(fd); + + qemu_img_path = getenv("QTEST_QEMU_IMG"); + g_assert(qemu_img_path); + qemu_img_abs_path = realpath(qemu_img_path, NULL); + g_assert(qemu_img_abs_path); + + ret = snprintf(cmd, sizeof(cmd), + "%s convert -f raw -O qcow2 %s %s > /dev/null", + qemu_img_abs_path, + raw_path, qcow2_path); + g_assert((0 < ret) && (ret <= sizeof(cmd))); + ret = system(cmd); + g_assert(ret == 0); + + ret = snprintf(cmd, sizeof(cmd), + "%s resize %s %" PRIu64 " > /dev/null", + qemu_img_abs_path, + qcow2_path, qcow2_size); + g_assert((0 < ret) && (ret <= sizeof(cmd))); + ret = system(cmd); + g_assert(ret == 0); + + free(qemu_img_abs_path); + + unlink(raw_path); + free(raw_path); + + return qcow2_path; +} + +struct QemuCfgFile { + uint32_t size; /* file size */ + uint16_t select; /* write this to 0x510 to read it */ + uint16_t reserved; + char name[56]; +}; + +static uint16_t find_fw_cfg_file(QFWCFG *fw_cfg, + const char *filename) +{ + struct QemuCfgFile qfile; + uint32_t count, e; + uint16_t select; + + count = qfw_cfg_get_u32(fw_cfg, FW_CFG_FILE_DIR); + count = be32_to_cpu(count); + for (select = 0, e = 0; e < count; e++) { + qfw_cfg_read_data(fw_cfg, &qfile, sizeof(qfile)); + if (!strcmp(filename, qfile.name)) { + select = be16_to_cpu(qfile.select); + } + } + + return select; +} + +static void read_fw_cfg_file(QFWCFG *fw_cfg, + const char *filename, + void *data, + size_t len) +{ + uint16_t select = find_fw_cfg_file(fw_cfg, filename); + + g_assert(select); + + qfw_cfg_get(fw_cfg, select, data, len); +} + +#define BIOS_GEOMETRY_MAX_SIZE 10000 + +typedef struct { + uint32_t c; + uint32_t h; + uint32_t s; +} CHS; + +typedef struct { + const char *dev_path; + CHS chs; +} CHSResult; + +static void read_bootdevices(QFWCFG *fw_cfg, CHSResult expected[]) +{ + char *buf = g_malloc0(BIOS_GEOMETRY_MAX_SIZE); + char *cur; + GList *results = NULL, *cur_result; + CHSResult *r; + int i; + int res; + bool found; + + read_fw_cfg_file(fw_cfg, "bios-geometry", buf, BIOS_GEOMETRY_MAX_SIZE); + + for (cur = buf; *cur; cur++) { + if (*cur == '\n') { + *cur = '\0'; + } + } + cur = buf; + + while (strlen(cur)) { + + r = g_malloc0(sizeof(*r)); + r->dev_path = g_malloc0(strlen(cur) + 1); + res = sscanf(cur, "%s %" PRIu32 " %" PRIu32 " %" PRIu32, + (char *)r->dev_path, + &(r->chs.c), &(r->chs.h), &(r->chs.s)); + + g_assert(res == 4); + + results = g_list_prepend(results, r); + + cur += strlen(cur) + 1; + } + + i = 0; + + while (expected[i].dev_path) { + found = false; + cur_result = results; + while (cur_result) { + r = cur_result->data; + if (!strcmp(r->dev_path, expected[i].dev_path) && + !memcmp(&(r->chs), &(expected[i].chs), sizeof(r->chs))) { + found = true; + break; + } + cur_result = g_list_next(cur_result); + } + g_assert(found); + g_free((char *)((CHSResult *)cur_result->data)->dev_path); + g_free(cur_result->data); + results = g_list_delete_link(results, cur_result); + i++; + } + + g_assert(results == NULL); + + g_free(buf); +} + +#define MAX_DRIVES 30 + +typedef struct { + char **argv; + int argc; + char **drives; + int n_drives; + int n_scsi_disks; + int n_scsi_controllers; + int n_virtio_disks; +} TestArgs; + +static TestArgs *create_args(void) +{ + TestArgs *args = g_malloc0(sizeof(*args)); + args->argv = g_new0(char *, ARGV_SIZE); + args->argc = append_arg(args->argc, args->argv, + ARGV_SIZE, g_strdup("-nodefaults")); + args->drives = g_new0(char *, MAX_DRIVES); + return args; +} + +static void add_drive_with_mbr(TestArgs *args, + MBRpartitions mbr, uint64_t sectors) +{ + char *img_file_name; + char part[300]; + int ret; + + g_assert(args->n_drives < MAX_DRIVES); + + img_file_name = create_qcow2_with_mbr(mbr, sectors); + + args->drives[args->n_drives] = img_file_name; + ret = snprintf(part, sizeof(part), + "-drive file=%s,if=none,format=qcow2,id=disk%d", + img_file_name, args->n_drives); + g_assert((0 < ret) && (ret <= sizeof(part))); + args->argc = append_arg(args->argc, args->argv, ARGV_SIZE, g_strdup(part)); + args->n_drives++; +} + +static void add_ide_disk(TestArgs *args, + int drive_idx, int bus, int unit, int c, int h, int s) +{ + char part[300]; + int ret; + + ret = snprintf(part, sizeof(part), + "-device ide-hd,drive=disk%d,bus=ide.%d,unit=%d," + "lcyls=%d,lheads=%d,lsecs=%d", + drive_idx, bus, unit, c, h, s); + g_assert((0 < ret) && (ret <= sizeof(part))); + args->argc = append_arg(args->argc, args->argv, ARGV_SIZE, g_strdup(part)); +} + +static void add_scsi_controller(TestArgs *args, + const char *type, + const char *bus, + int addr) +{ + char part[300]; + int ret; + + ret = snprintf(part, sizeof(part), + "-device %s,id=scsi%d,bus=%s,addr=%d", + type, args->n_scsi_controllers, bus, addr); + g_assert((0 < ret) && (ret <= sizeof(part))); + args->argc = append_arg(args->argc, args->argv, ARGV_SIZE, g_strdup(part)); + args->n_scsi_controllers++; +} + +static void add_scsi_disk(TestArgs *args, + int drive_idx, int bus, + int channel, int scsi_id, int lun, + int c, int h, int s) +{ + char part[300]; + int ret; + + ret = snprintf(part, sizeof(part), + "-device scsi-hd,id=scsi-disk%d,drive=disk%d," + "bus=scsi%d.0," + "channel=%d,scsi-id=%d,lun=%d," + "lcyls=%d,lheads=%d,lsecs=%d", + args->n_scsi_disks, drive_idx, bus, channel, scsi_id, lun, + c, h, s); + g_assert((0 < ret) && (ret <= sizeof(part))); + args->argc = append_arg(args->argc, args->argv, ARGV_SIZE, g_strdup(part)); + args->n_scsi_disks++; +} + +static void add_virtio_disk(TestArgs *args, + int drive_idx, const char *bus, int addr, + int c, int h, int s) +{ + char part[300]; + int ret; + + ret = snprintf(part, sizeof(part), + "-device virtio-blk-pci,id=virtio-disk%d," + "drive=disk%d,bus=%s,addr=%d," + "lcyls=%d,lheads=%d,lsecs=%d", + args->n_virtio_disks, drive_idx, bus, addr, c, h, s); + g_assert((0 < ret) && (ret <= sizeof(part))); + args->argc = append_arg(args->argc, args->argv, ARGV_SIZE, g_strdup(part)); + args->n_virtio_disks++; +} + +static void test_override(TestArgs *args, CHSResult expected[]) +{ + QTestState *qts; + char *joined_args; + QFWCFG *fw_cfg; + int i; + + joined_args = g_strjoinv(" ", args->argv); + + qts = qtest_init(joined_args); + fw_cfg = pc_fw_cfg_init(qts); + + read_bootdevices(fw_cfg, expected); + + g_free(joined_args); + qtest_quit(qts); + + g_free(fw_cfg); + + for (i = 0; i < args->n_drives; i++) { + unlink(args->drives[i]); + free(args->drives[i]); + } + g_free(args->drives); + g_strfreev(args->argv); + g_free(args); +} + +static void test_override_ide(void) +{ + TestArgs *args = create_args(); + CHSResult expected[] = { + {"/pci@i0cf8/ide@1,1/drive@0/disk@0", {10000, 120, 30} }, + {"/pci@i0cf8/ide@1,1/drive@0/disk@1", {9000, 120, 30} }, + {"/pci@i0cf8/ide@1,1/drive@1/disk@0", {0, 1, 1} }, + {"/pci@i0cf8/ide@1,1/drive@1/disk@1", {1, 0, 0} }, + {NULL, {0, 0, 0} } + }; + add_drive_with_mbr(args, empty_mbr, 1); + add_drive_with_mbr(args, empty_mbr, 1); + add_drive_with_mbr(args, empty_mbr, 1); + add_drive_with_mbr(args, empty_mbr, 1); + add_ide_disk(args, 0, 0, 0, 10000, 120, 30); + add_ide_disk(args, 1, 0, 1, 9000, 120, 30); + add_ide_disk(args, 2, 1, 0, 0, 1, 1); + add_ide_disk(args, 3, 1, 1, 1, 0, 0); + test_override(args, expected); +} + +static void test_override_scsi(void) +{ + TestArgs *args = create_args(); + CHSResult expected[] = { + {"/pci@i0cf8/scsi@3/channel@0/disk@0,0", {10000, 120, 30} }, + {"/pci@i0cf8/scsi@3/channel@0/disk@1,0", {9000, 120, 30} }, + {"/pci@i0cf8/scsi@3/channel@0/disk@2,0", {1, 0, 0} }, + {"/pci@i0cf8/scsi@3/channel@0/disk@3,0", {0, 1, 0} }, + {NULL, {0, 0, 0} } + }; + add_drive_with_mbr(args, empty_mbr, 1); + add_drive_with_mbr(args, empty_mbr, 1); + add_drive_with_mbr(args, empty_mbr, 1); + add_drive_with_mbr(args, empty_mbr, 1); + add_scsi_controller(args, "lsi53c895a", "pci.0", 3); + add_scsi_disk(args, 0, 0, 0, 0, 0, 10000, 120, 30); + add_scsi_disk(args, 1, 0, 0, 1, 0, 9000, 120, 30); + add_scsi_disk(args, 2, 0, 0, 2, 0, 1, 0, 0); + add_scsi_disk(args, 3, 0, 0, 3, 0, 0, 1, 0); + test_override(args, expected); +} + +static void test_override_scsi_2_controllers(void) +{ + TestArgs *args = create_args(); + CHSResult expected[] = { + {"/pci@i0cf8/scsi@3/channel@0/disk@0,0", {10000, 120, 30} }, + {"/pci@i0cf8/scsi@3/channel@0/disk@1,0", {9000, 120, 30} }, + {"/pci@i0cf8/scsi@4/channel@0/disk@0,1", {1, 0, 0} }, + {"/pci@i0cf8/scsi@4/channel@0/disk@1,2", {0, 1, 0} }, + {NULL, {0, 0, 0} } + }; + add_drive_with_mbr(args, empty_mbr, 1); + add_drive_with_mbr(args, empty_mbr, 1); + add_drive_with_mbr(args, empty_mbr, 1); + add_drive_with_mbr(args, empty_mbr, 1); + add_scsi_controller(args, "lsi53c895a", "pci.0", 3); + add_scsi_controller(args, "virtio-scsi-pci", "pci.0", 4); + add_scsi_disk(args, 0, 0, 0, 0, 0, 10000, 120, 30); + add_scsi_disk(args, 1, 0, 0, 1, 0, 9000, 120, 30); + add_scsi_disk(args, 2, 1, 0, 0, 1, 1, 0, 0); + add_scsi_disk(args, 3, 1, 0, 1, 2, 0, 1, 0); + test_override(args, expected); +} + +static void test_override_virtio_blk(void) +{ + TestArgs *args = create_args(); + CHSResult expected[] = { + {"/pci@i0cf8/scsi@3/disk@0,0", {10000, 120, 30} }, + {"/pci@i0cf8/scsi@4/disk@0,0", {9000, 120, 30} }, + {NULL, {0, 0, 0} } + }; + add_drive_with_mbr(args, empty_mbr, 1); + add_drive_with_mbr(args, empty_mbr, 1); + add_virtio_disk(args, 0, "pci.0", 3, 10000, 120, 30); + add_virtio_disk(args, 1, "pci.0", 4, 9000, 120, 30); + test_override(args, expected); +} + +static void test_override_zero_chs(void) +{ + TestArgs *args = create_args(); + CHSResult expected[] = { + {NULL, {0, 0, 0} } + }; + add_drive_with_mbr(args, empty_mbr, 1); + add_ide_disk(args, 0, 1, 1, 0, 0, 0); + test_override(args, expected); +} + +static void test_override_scsi_hot_unplug(void) +{ + QTestState *qts; + char *joined_args; + QFWCFG *fw_cfg; + QDict *response; + int i; + TestArgs *args = create_args(); + CHSResult expected[] = { + {"/pci@i0cf8/scsi@2/channel@0/disk@0,0", {10000, 120, 30} }, + {"/pci@i0cf8/scsi@2/channel@0/disk@1,0", {20, 20, 20} }, + {NULL, {0, 0, 0} } + }; + CHSResult expected2[] = { + {"/pci@i0cf8/scsi@2/channel@0/disk@1,0", {20, 20, 20} }, + {NULL, {0, 0, 0} } + }; + add_drive_with_mbr(args, empty_mbr, 1); + add_drive_with_mbr(args, empty_mbr, 1); + add_scsi_controller(args, "virtio-scsi-pci", "pci.0", 2); + add_scsi_disk(args, 0, 0, 0, 0, 0, 10000, 120, 30); + add_scsi_disk(args, 1, 0, 0, 1, 0, 20, 20, 20); + + joined_args = g_strjoinv(" ", args->argv); + + qts = qtest_init(joined_args); + fw_cfg = pc_fw_cfg_init(qts); + + read_bootdevices(fw_cfg, expected); + + /* unplug device an restart */ + response = qtest_qmp(qts, + "{ 'execute': 'device_del'," + " 'arguments': {'id': 'scsi-disk0' }}"); + g_assert(response); + g_assert(!qdict_haskey(response, "error")); + qobject_unref(response); + response = qtest_qmp(qts, + "{ 'execute': 'system_reset', 'arguments': { }}"); + g_assert(response); + g_assert(!qdict_haskey(response, "error")); + qobject_unref(response); + + qtest_qmp_eventwait(qts, "RESET"); + + read_bootdevices(fw_cfg, expected2); + + g_free(joined_args); + qtest_quit(qts); + + g_free(fw_cfg); + + for (i = 0; i < args->n_drives; i++) { + unlink(args->drives[i]); + free(args->drives[i]); + } + g_free(args->drives); + g_strfreev(args->argv); + g_free(args); +} + +static void test_override_virtio_hot_unplug(void) +{ + QTestState *qts; + char *joined_args; + QFWCFG *fw_cfg; + QDict *response; + int i; + TestArgs *args = create_args(); + CHSResult expected[] = { + {"/pci@i0cf8/scsi@2/disk@0,0", {10000, 120, 30} }, + {"/pci@i0cf8/scsi@3/disk@0,0", {20, 20, 20} }, + {NULL, {0, 0, 0} } + }; + CHSResult expected2[] = { + {"/pci@i0cf8/scsi@3/disk@0,0", {20, 20, 20} }, + {NULL, {0, 0, 0} } + }; + add_drive_with_mbr(args, empty_mbr, 1); + add_drive_with_mbr(args, empty_mbr, 1); + add_virtio_disk(args, 0, "pci.0", 2, 10000, 120, 30); + add_virtio_disk(args, 1, "pci.0", 3, 20, 20, 20); + + joined_args = g_strjoinv(" ", args->argv); + + qts = qtest_init(joined_args); + fw_cfg = pc_fw_cfg_init(qts); + + read_bootdevices(fw_cfg, expected); + + /* unplug device an restart */ + response = qtest_qmp(qts, + "{ 'execute': 'device_del'," + " 'arguments': {'id': 'virtio-disk0' }}"); + g_assert(response); + g_assert(!qdict_haskey(response, "error")); + qobject_unref(response); + response = qtest_qmp(qts, + "{ 'execute': 'system_reset', 'arguments': { }}"); + g_assert(response); + g_assert(!qdict_haskey(response, "error")); + qobject_unref(response); + + qtest_qmp_eventwait(qts, "RESET"); + + read_bootdevices(fw_cfg, expected2); + + g_free(joined_args); + qtest_quit(qts); + + g_free(fw_cfg); + + for (i = 0; i < args->n_drives; i++) { + unlink(args->drives[i]); + free(args->drives[i]); + } + g_free(args->drives); + g_strfreev(args->argv); + g_free(args); +} + int main(int argc, char **argv) { Backend i; @@ -XXX,XX +XXX,XX @@ int main(int argc, char **argv) qtest_add_func("hd-geo/ide/device/mbr/chs", test_ide_device_mbr_chs); qtest_add_func("hd-geo/ide/device/user/chs", test_ide_device_user_chs); qtest_add_func("hd-geo/ide/device/user/chst", test_ide_device_user_chst); + if (have_qemu_img()) { + qtest_add_func("hd-geo/override/ide", test_override_ide); + qtest_add_func("hd-geo/override/scsi", test_override_scsi); + qtest_add_func("hd-geo/override/scsi_2_controllers", + test_override_scsi_2_controllers); + qtest_add_func("hd-geo/override/virtio_blk", test_override_virtio_blk); + qtest_add_func("hd-geo/override/zero_chs", test_override_zero_chs); + qtest_add_func("hd-geo/override/scsi_hot_unplug", + test_override_scsi_hot_unplug); + qtest_add_func("hd-geo/override/virtio_hot_unplug", + test_override_virtio_hot_unplug); + } else { + g_test_message("QTEST_QEMU_IMG not set or qemu-img missing; " + "skipping hd-geo/override/* tests"); + } ret = g_test_run(); -- 2.23.0.351.gc4317032e6-goog