From: Alistair Francis <alistair.francis@wdc.com> The following changes since commit f5a2438405d4ae8b62de7c9b39fac0b2155ee544: Merge tag 'pull-qapi-2026-05-21' of https://repo.or.cz/qemu/armbru into staging (2026-05-21 09:00:22 -0400) are available in the Git repository at: https://github.com/alistair23/qemu.git tags/pull-riscv-to-apply-20260522 for you to fetch changes up to b7d87fb10d53a918e9c4a3dfe1fb06ce42c52526: hw/riscv: riscv-iommu: Re-process command queue after clearing CMD_ILL (2026-05-22 09:59:21 +1000) ---------------------------------------------------------------- RISC-V PR for 11.1. * Remove spike as default machine * Deprecate the shakti_c machine * Set MISA.[C|X] based on the selected extensions * Update Maintainers for OpenSBI Firmware * Update OpenSBI to v1.8.1 * Avoid RISCVCPU copy in PMU FDT setup * A collection of specification compliance improvements * Fix Svnapot 64KB pages * Handle source overlap of vector widening reduction instructions * Check interrupt in SiFive UART after txctrl register is written * Fix medeleg[11] read-only zero bit for M-mode ECALL * Fix tail handling for vmv.s.x and vfmv.s.f * Update the local AIA interrupt mask * Add KVM support for Zicbop and BFloat16 extensions * Fix the IOMMU FSC SV32 capability check * Avoid caching PCI device IDs in the IOMMU * Implement Microchip mpfs ioscb PLLs and sysreg clock dividers * Remove the internal CPU riscv_cpu_* arrays * Fix IOCOUNTINH.CY toggle detection * Fix the read of pmpaddr(0-63) CSRs * Make hpmcounterh return the upper 32-bits * Minor fixes and enhancements of RISC-V AIA devices * Re-process IOMMU command queue after clearing CMD_ILL ---------------------------------------------------------------- Abhigyan Kumar (1): target/riscv: Fix medeleg[11] read-only zero bit for M-mode ECALL Alistair Francis (4): target/riscv: Remove spike as default machine target/riscv: Deprecate the shakti_c machine MAINTAINERS: Maintain OpenSBI Firmware target/riscv: Update the local interrupt mask Andrew Jones (1): hw/riscv/riscv-iommu: Fix Svnapot 64KB pages Anton Blanchard (1): target/riscv: rvv: Handle source overlap of vector widening reduction instructions Chengbo Gao (1): hw/riscv/riscv-iommu: Avoid caching PCI device IDs Daniel Henrique Barboza (16): roms/opensbi: Update to v1.8.1 target/riscv/cpu.c: add xlrbr isa_edata_arr[] entry target/riscv/cpu.c: fix smctr/ssctr isa_edata_arr[] order target/riscv: make riscv-qmp-cmds use isa_data_arr[] target/riscv/tcg: treat all exts equally in cpu_disable_priv_spec_isa_exts target/riscv/tcg: use only isa_edata_arr[] in cpu_cfg_ext_get_name() target/riscv/cpu.c: remove riscv_cpu_enable_named_feat() target/riscv: remove riscv_cpu_named_features[] target/riscv/tcg: use isa_edata_arr[] in riscv_cpu_update_misa_x() target/riscv/kvm: use isa_edata_arr[] for unavailable props target/riscv/tcg: use isa_edata_arr[] to enable max exts target/riscv/tcg: use cfg_offset as cpu_set_multi_ext cb opaque target/riscv: do not set defaults in cpu prop callback target/riscv/tcg: use isa_edata_arr[] to create user props target/riscv/cpu: remove riscv_cpu_* arrays target/riscv/csr.c: fix read of pmpaddr(0-63) CSRs Fangyu Yu (1): hw/riscv/riscv-iommu: Fix IOCOUNTINH.CY toggle detection Frank Chang (3): target/riscv: Update MISA.C for Zc* extensions target/riscv: Update MISA.X for non-standard extensions hw/char: Check interrupt after txctrl register is written Guenter Roeck (1): hw: misc: Implement Microchip mpfs ioscb PLLs and sysreg clock dividers Jay Chang (1): hw/riscv: riscv-iommu: Re-process command queue after clearing CMD_ILL Jim Shu (4): hw/intc: riscv_aplic: Fix level trigger IRQ in direct delivery mode hw/intc: riscv_aplic: Add reset API to APLIC hw/intc: riscv_imsic: Add reset API to IMSIC hw/intc: riscv_aplic: add trace events of APLIC read/write function Mohamed Ayman (1): riscv: virt: avoid RISCVCPU copy in PMU FDT setup Portia Stephens (1): target/riscv: Make hpmcounterh return the upper 32-bits Zishun Yi (9): target/riscv: Allow mseccfg access based on ext_zicfilp target/riscv: add Zvknha as an implied extension for Zvknhb target/riscv: Remove unconditional MENVCFG_CDE from mask target/riscv: Fix missing CDE check for scountinhibit target/riscv/pmp: Fix integer overflow in TOR and NA4 address computation target/riscv: Add mseccfg to VMStateDescription target/riscv: clear mseccfg on reset for all dependent extensions hw/riscv/riscv-iommu: fix FSC SV32 capability check hw/riscv/virt-acpi-build: Fix off-by-one error in RIMT ID mapping Zongmin Zhou (2): target/riscv/kvm: add KVM support for Zicbop extension target/riscv/kvm: Add BFloat16 extensions support chen.zhongyao@zte.com.cn (1): target/riscv: Fix tail handling for vmv.s.x and vfmv.s.f MAINTAINERS | 2 + docs/about/deprecated.rst | 21 +- docs/about/removed-features.rst | 14 ++ include/hw/misc/mchp_pfsoc_ioscb.h | 2 + target/riscv/cpu.h | 13 +- target/riscv/helper.h | 4 + hw/char/sifive_uart.c | 1 + hw/intc/riscv_aplic.c | 116 ++++++--- hw/intc/riscv_imsic.c | 19 ++ hw/misc/mchp_pfsoc_ioscb.c | 47 +++- hw/misc/mchp_pfsoc_sysreg.c | 13 + hw/riscv/riscv-iommu-hpm.c | 3 +- hw/riscv/riscv-iommu.c | 96 ++++++-- hw/riscv/shakti_c.c | 1 + hw/riscv/spike.c | 1 - hw/riscv/virt-acpi-build.c | 3 +- hw/riscv/virt.c | 4 +- target/riscv/cpu.c | 327 +++++++++---------------- target/riscv/csr.c | 36 ++- target/riscv/kvm/kvm-cpu.c | 62 +++-- target/riscv/machine.c | 20 ++ target/riscv/pmp.c | 4 +- target/riscv/riscv-qmp-cmds.c | 30 +-- target/riscv/tcg/tcg-cpu.c | 192 +++++++-------- target/riscv/vector_helper.c | 18 ++ target/riscv/insn_trans/trans_rvv.c.inc | 45 ++-- hw/intc/trace-events | 4 + pc-bios/opensbi-riscv32-generic-fw_dynamic.bin | Bin 268752 -> 270384 bytes pc-bios/opensbi-riscv64-generic-fw_dynamic.bin | Bin 273048 -> 275928 bytes roms/opensbi | 2 +- 30 files changed, 613 insertions(+), 487 deletions(-) From: Alistair Francis <alistair.francis@wdc.com> In QEMU 10.0 we deprecated the default spike machine, let's finally remove spike as the default and require users to specify the machine. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Chao Liu <chao.liu.zevorn@gmail.com> Message-ID: <20260430052218.771358-2-alistair.francis@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- docs/about/deprecated.rst | 18 ------------------ docs/about/removed-features.rst | 14 ++++++++++++++ hw/riscv/spike.c | 1 - 3 files changed, 14 insertions(+), 19 deletions(-) diff --git a/docs/about/deprecated.rst b/docs/about/deprecated.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/about/deprecated.rst +++ b/docs/about/deprecated.rst @@ -XXX,XX +XXX,XX @@ better reflects the way this property affects all random data within the device tree blob, not just the ``kaslr-seed`` node. -RISC-V default machine option (since 10.0) -'''''''''''''''''''''''''''''''''''''''''' - -RISC-V defines ``spike`` as the default machine if no machine option is -given in the command line. This happens because ``spike`` is the first -RISC-V machine implemented in QEMU and setting it as default was -convenient at that time. Now we have 7 riscv64 and 6 riscv32 machines -and having ``spike`` as a default is no longer justified. This default -will also promote situations where users think they're running ``virt`` -(the most used RISC-V machine type in 10.0) when in fact they're -running ``spike``. - -Removing the default machine option forces users to always set the machine -they want to use and avoids confusion. Existing users of the ``spike`` -machine must ensure that they're setting the ``spike`` machine in the -command line (``-M spike``). - - Backend options --------------- diff --git a/docs/about/removed-features.rst b/docs/about/removed-features.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/about/removed-features.rst +++ b/docs/about/removed-features.rst @@ -XXX,XX +XXX,XX @@ firmware is available to boot it. It can be replaced by the ``ast2700fc``, another multi-SoC machine based on the newer AST2700 SoCs which are excepted to receive better support in the future. +RISC-V default machine (removed in 11.1) +'''''''''''''''''''''''''''''''''''''''' + +RISC-V used to define ``spike`` as the default machine if no machine option +was given via the command line. This happend because ``spike`` was the first +RISC-V machine implemented in QEMU and setting it as default was +convenient at that time. Now we have 7 riscv64 and 6 riscv32 machines +and having ``spike`` as a default is no longer justified. + +The default machine option has been removed, forcing users to always set the +machine they want to use to avoid confusion. Existing users of the ``spike`` +machine must ensure that they're setting the ``spike`` machine in the +command line (``-M spike``). + linux-user mode CPUs -------------------- diff --git a/hw/riscv/spike.c b/hw/riscv/spike.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/spike.c +++ b/hw/riscv/spike.c @@ -XXX,XX +XXX,XX @@ static void spike_machine_class_init(ObjectClass *oc, const void *data) mc->desc = "RISC-V Spike board"; mc->init = spike_board_init; mc->max_cpus = SPIKE_CPUS_MAX; - mc->is_default = true; mc->default_cpu_type = TYPE_RISCV_CPU_BASE; mc->possible_cpu_arch_ids = riscv_numa_possible_cpu_arch_ids; mc->cpu_index_to_instance_props = riscv_numa_cpu_index_to_props; -- 2.53.0 From: Alistair Francis <alistair.francis@wdc.com> The RISC-V shakti_c machine hasn't had meaningful contributions since 2021 and is currently unmaintained. The machine is scheduled to be removed as it appears to have no users. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Chao Liu <chao.liu.zevorn@gmail.com> Message-ID: <20260430052218.771358-3-alistair.francis@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- docs/about/deprecated.rst | 7 +++++++ hw/riscv/shakti_c.c | 1 + 2 files changed, 8 insertions(+) diff --git a/docs/about/deprecated.rst b/docs/about/deprecated.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/about/deprecated.rst +++ b/docs/about/deprecated.rst @@ -XXX,XX +XXX,XX @@ deprecated; use the new name ``dtb-randomness`` instead. The new name better reflects the way this property affects all random data within the device tree blob, not just the ``kaslr-seed`` node. +RISC-V Shakti machine (since 11.1) +'''''''''''''''''''''''''''''''''' + +The RISC-V ``shakti_c`` machine hasn't had meaningful contributions since 2021 +and is currently unmaintained. The machine is scheduled to be removed as it +appears to have no users. + Backend options --------------- diff --git a/hw/riscv/shakti_c.c b/hw/riscv/shakti_c.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/shakti_c.c +++ b/hw/riscv/shakti_c.c @@ -XXX,XX +XXX,XX @@ static void shakti_c_machine_class_init(ObjectClass *klass, const void *data) mc->init = shakti_c_machine_state_init; mc->default_cpu_type = TYPE_RISCV_CPU_SHAKTI_C; mc->valid_cpu_types = valid_cpu_types; + mc->deprecation_reason = "Currently unmaintained with no known users"; mc->default_ram_id = "riscv.shakti.c.ram"; } -- 2.53.0 From: Frank Chang <frank.chang@sifive.com> MISA.C is set if the following extensions are selected: * Zca and not F. * Zca, Zcf and F (but not D) is specified (RV32 only). * Zca, Zcf and Zcd if D is specified (RV32 only). * Zca, Zcd if D is specified (RV64 only). Therefore, MISA.C must be set according to the Zc* extension rules. Warn the user if RVC is explicitly disabled but MISA.C is required by the rules above. Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Max Chou <max.chou@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260424050509.3935180-2-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 39 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_enable_implied_rules(RISCVCPU *cpu) } } +/* + * MISA.C is set if the following extensions are selected: + * - Zca and not F. + * - Zca, Zcf and F (but not D) is specified on RV32. + * - Zca, Zcf and Zcd if D is specified on RV32. + * - Zca, Zcd if D is specified on RV64. + */ +static void riscv_cpu_update_misa_c(RISCVCPU *cpu) +{ + CPURISCVState *env = &cpu->env; + bool set_misa_c = false; + + if (riscv_has_ext(env, RVC)) { + return; + } + + if (cpu->cfg.ext_zca && !riscv_has_ext(env, RVF)) { + set_misa_c = true; + } else if (riscv_cpu_mxl(env) == MXL_RV32 && + cpu->cfg.ext_zca && cpu->cfg.ext_zcf && + (riscv_has_ext(env, RVD) ? cpu->cfg.ext_zcd : + riscv_has_ext(env, RVF))) { + set_misa_c = true; + } else if (riscv_cpu_mxl(env) == MXL_RV64 && + cpu->cfg.ext_zca && cpu->cfg.ext_zcd) { + set_misa_c = true; + } + + if (set_misa_c) { + if (cpu_misa_ext_is_user_set(RVC)) { + warn_report("RVC mandated by Zca/Zcf/Zcd extensions"); + return; + } + + riscv_cpu_set_misa_ext(env, env->misa_ext | RVC); + } +} + void riscv_tcg_cpu_finalize_features(RISCVCPU *cpu, Error **errp) { CPURISCVState *env = &cpu->env; @@ -XXX,XX +XXX,XX @@ void riscv_tcg_cpu_finalize_features(RISCVCPU *cpu, Error **errp) riscv_cpu_init_implied_exts_rules(); riscv_cpu_enable_implied_rules(cpu); + riscv_cpu_update_misa_c(cpu); riscv_cpu_validate_misa_priv(env, &local_err); if (local_err != NULL) { -- 2.53.0 From: Frank Chang <frank.chang@sifive.com> MISA.X is set if there are any non-standard extensions. We should set MISA.X when any of the vendor extensions is enabled. Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Max Chou <max.chou@sifive.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260424050509.3935180-3-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 1 + target/riscv/tcg/tcg-cpu.c | 15 +++++++++++++++ 2 files changed, 16 insertions(+) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState CPURISCVState; #define RVH RV('H') #define RVG RV('G') #define RVB RV('B') +#define RVX RV('X') extern const uint32_t misa_bits[]; const char *riscv_get_misa_ext_name(uint32_t bit); diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_update_misa_c(RISCVCPU *cpu) } } +/* MISA.X is set when any of the non-standard extensions is enabled. */ +static void riscv_cpu_update_misa_x(RISCVCPU *cpu) +{ + CPURISCVState *env = &cpu->env; + const RISCVCPUMultiExtConfig *arr = riscv_cpu_vendor_exts; + + for (int i = 0; arr[i].name != NULL; i++) { + if (isa_ext_is_enabled(cpu, arr[i].offset)) { + riscv_cpu_set_misa_ext(env, env->misa_ext | RVX); + break; + } + } +} + void riscv_tcg_cpu_finalize_features(RISCVCPU *cpu, Error **errp) { CPURISCVState *env = &cpu->env; @@ -XXX,XX +XXX,XX @@ void riscv_tcg_cpu_finalize_features(RISCVCPU *cpu, Error **errp) riscv_cpu_init_implied_exts_rules(); riscv_cpu_enable_implied_rules(cpu); riscv_cpu_update_misa_c(cpu); + riscv_cpu_update_misa_x(cpu); riscv_cpu_validate_misa_priv(env, &local_err); if (local_err != NULL) { -- 2.53.0 From: Alistair Francis <alistair.francis@wdc.com> Mark the OpenSBI Firmware as maintained by me (Alistair Francis) and add Daniel Henrique Barboza as a reviewer. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20260506234243.1873782-1-alistair.francis@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- MAINTAINERS | 2 ++ 1 file changed, 2 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ S: Supported F: hw/i386/amd_iommu* OpenSBI Firmware +M: Alistair Francis <Alistair.Francis@wdc.com> +R: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> L: qemu-riscv@nongnu.org S: Supported F: pc-bios/opensbi-* -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Update OpenSBI and the pre-built opensbi32 and opensbi64 images to version 1.8.1. We're going for the intermediate/bug fix release 1.8.1 directly due to a PMP related fix that was impacting QEMU profile CPUs. Changelog for v1.8.1: * Typo fix in comments of sbi_hartindex_to_hartid() * Fix hart protection abstraction for platforms without PMP Changelog for v1.8 includes, among other things: - IPI device ratings - SiFive CLINT v2 support - SiFive PL2 cache controller driver - SiFive Extensible Cache (EC) driver - SiFive TMC0 based HSM driver - SiFive SMC0 based system suspend driver - MPXY RPMI mailbox driver for voltage service group - MPXY RPMI mailbox driver for device power service group - MPXY RPMI mailbox driver for performance service group Check out the full release log at [1] for more info. [1] https://github.com/riscv-software-src/opensbi/releases/tag/v1.8 Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260108160825.171794-1-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- .../opensbi-riscv32-generic-fw_dynamic.bin | Bin 268752 -> 270384 bytes .../opensbi-riscv64-generic-fw_dynamic.bin | Bin 273048 -> 275928 bytes roms/opensbi | 2 +- 3 files changed, 1 insertion(+), 1 deletion(-) diff --git a/pc-bios/opensbi-riscv32-generic-fw_dynamic.bin b/pc-bios/opensbi-riscv32-generic-fw_dynamic.bin index XXXXXXX..XXXXXXX 100644 Binary files a/pc-bios/opensbi-riscv32-generic-fw_dynamic.bin and b/pc-bios/opensbi-riscv32-generic-fw_dynamic.bin differ diff --git a/pc-bios/opensbi-riscv64-generic-fw_dynamic.bin b/pc-bios/opensbi-riscv64-generic-fw_dynamic.bin index XXXXXXX..XXXXXXX 100644 Binary files a/pc-bios/opensbi-riscv64-generic-fw_dynamic.bin and b/pc-bios/opensbi-riscv64-generic-fw_dynamic.bin differ diff --git a/roms/opensbi b/roms/opensbi index XXXXXXX..XXXXXXX 160000 --- a/roms/opensbi +++ b/roms/opensbi @@ -1 +1 @@ -Subproject commit a32a91069119e7a5aa31e6bc51d5e00860be3d80 +Subproject commit 74434f255873d74e56cc50aa762d1caf24c099f8 -- 2.53.0 From: Mohamed Ayman <mohamedaymanworkspace@gmail.com> Use a pointer to the hart instead of copying RISCVCPU when passing pmu_avail_ctrs to riscv_pmu_generate_fdt_node(). Signed-off-by: Mohamed Ayman <mohamedaymanworkspace@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260503180252.1122776-1-mohamedaymanworkspace@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_pmu(RISCVVirtState *s) { g_autofree char *pmu_name = g_strdup_printf("/pmu"); MachineState *ms = MACHINE(s); - RISCVCPU hart = s->soc[0].harts[0]; + RISCVCPU *hart = &s->soc[0].harts[0]; qemu_fdt_add_subnode(ms->fdt, pmu_name); qemu_fdt_setprop_string(ms->fdt, pmu_name, "compatible", "riscv,pmu"); - riscv_pmu_generate_fdt_node(ms->fdt, hart.pmu_avail_ctrs, pmu_name); + riscv_pmu_generate_fdt_node(ms->fdt, hart->pmu_avail_ctrs, pmu_name); } static void create_fdt_sockets(RISCVVirtState *s, -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> The Zicfilp extension adds the MLPE field to the mseccfg CSR. According to the RISC-V Privileged Specification, mseccfg exists if any extension that adds a field to it is implemented. Currently, the `have_mseccfg()` predicate function checks for Smepmp, Zkr, and Smmpm, but misses Zicfilp. As a result, if a CPU is configured with `zicfilp=true` but without the other extensions, accessing the mseccfg CSR will incorrectly raise an illegal instruction exception. This patch adds the missing check for `ext_zicfilp` to ensure the CSR is properly accessible when the Zicfilp extension is enabled. This issue was discovered and reported by SpecHunter, an AI-driven architecture specification analysis tool. Link: https://github.com/yizishun/rv-isa-sec/blob/master/output/riscv-isa-manual/pr-2561/qemu.txt Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Reviewed-by: Chao Liu <chao.liu.zevorn@gmail.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260511072705.3015986-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException have_mseccfg(CPURISCVState *env, int csrno) if (riscv_cpu_cfg(env)->ext_smmpm) { return RISCV_EXCP_NONE; } + if (riscv_cpu_cfg(env)->ext_zicfilp) { + return RISCV_EXCP_NONE; + } return RISCV_EXCP_ILLEGAL_INST; } -- 2.53.0 From: Andrew Jones <andrew.jones@oss.qualcomm.com> The Svnapot extension encodes a 64KB leaf PTE by setting PTE_N and storing bits [3:0] of the PPN as a NAPOT size indicator. The IOMMU model wasn't checking PTE_N and therefore was using the raw (NAPOT- encoded) PPN directly in the physical address, yielding an address 32 KB above the correct base. Fix both riscv_iommu_spa_fetch() and pdt_memory_read() by mirroring the Svnapot handling already present in target/riscv/cpu_helper.c: napot_bits = ctz64(ppn) + 1 /* 4 for 64KB */ napot_mask = (1 << napot_bits) - 1 /* 0xF */ phys_base = PPN_PHYS(ppn & ~napot_mask) page_offset = addr & (PPN_PHYS(napot_mask) | (TARGET_PAGE_SIZE - 1)) The spec only defines napot_bits == 4 (64KB); any other value is treated as a reserved encoding. This is a fix, rather than new feature support, because the spec says "IOMMU implementations must support the Svnapot standard extension for NAPOT Translation Contiguity." Fixes: 0c54acb8243d ("hw/riscv: add RISC-V IOMMU base emulation") Cc: qemu-stable@nongnu.org Signed-off-by: Andrew Jones <andrew.jones@oss.qualcomm.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Nutty Liu <nutty.liu@hotmail.com> Reviewed-by: Tomasz Jeznach <tjeznach@rivosinc.com> Message-ID: <20260508205129.377032-1-andrew.jones@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu.c | 44 ++++++++++++++++++++++++++++++++++++++---- 1 file changed, 40 insertions(+), 4 deletions(-) diff --git a/hw/riscv/riscv-iommu.c b/hw/riscv/riscv-iommu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.c +++ b/hw/riscv/riscv-iommu.c @@ -XXX,XX +XXX,XX @@ static bool riscv_iommu_msi_check(RISCVIOMMUState *s, RISCVIOMMUContext *ctx, return true; } +/* Returns the NAPOT page mask, or 0 for reserved encodings. */ +static hwaddr riscv_iommu_napot_page_mask(hwaddr ppn, hwaddr addr, hwaddr *out) +{ + int napot_bits = ctz64(ppn) + 1; + hwaddr napot_mask, page_mask; + + /* The spec only defines 64KB (napot_bits == 4) */ + if (napot_bits != 4) { + return 0; + } + + napot_mask = (1ULL << napot_bits) - 1; + page_mask = PPN_PHYS(napot_mask) | (TARGET_PAGE_SIZE - 1); + + *out = PPN_PHYS(ppn & ~napot_mask) | (addr & page_mask); + + return page_mask; +} + /* * RISCV IOMMU Address Translation Lookup - Page Table Walk * @@ -XXX,XX +XXX,XX @@ static int riscv_iommu_spa_fetch(RISCVIOMMUState *s, RISCVIOMMUContext *ctx, } else { /* Leaf PTE, translation completed. */ sc[pass].step = sc[pass].levels; - base = PPN_PHYS(ppn) | (addr & ((1ULL << va_skip) - 1)); - /* Update address mask based on smallest translation granularity */ - iotlb->addr_mask &= (1ULL << va_skip) - 1; + + if (pte & PTE_N) { + hwaddr mask = riscv_iommu_napot_page_mask(ppn, addr, &base); + + if (!mask) { + break; + } + iotlb->addr_mask &= mask; + } else { + base = PPN_PHYS(ppn) | (addr & ((1ULL << va_skip) - 1)); + /* Update address mask based on smallest translation granularity */ + iotlb->addr_mask &= (1ULL << va_skip) - 1; + } + /* Continue with S-Stage translation? */ if (pass && sc[0].step != sc[0].levels) { pass = S_STAGE; @@ -XXX,XX +XXX,XX @@ static MemTxResult pdt_memory_read(RISCVIOMMUState *s, return MEMTX_ACCESS_ERROR; /* Misaligned PPN */ } else { /* Leaf PTE, translation completed. */ - base = PPN_PHYS(ppn) | (addr & ((1ULL << va_skip) - 1)); + if (pte & PTE_N) { + if (!riscv_iommu_napot_page_mask(ppn, addr, &base)) { + return MEMTX_ACCESS_ERROR; + } + } else { + base = PPN_PHYS(ppn) | (addr & ((1ULL << va_skip) - 1)); + } break; } -- 2.53.0 From: Anton Blanchard <antonb@tenstorrent.com> Widening reductions read vs2 as a vector of SEW elements and vs1[0] as a scalar of 2*SEW. The ISA does not allow the same vector register to be read with different EEWs, so they must not overlap. vs1 is read as a scalar from element 0, so it is treated as a single vector register (independent of LMUL) when checking overlap. Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3208 Signed-off-by: Anton Blanchard <antonb@tenstorrent.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260417080328.31918-1-antonb@tenstorrent.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/insn_trans/trans_rvv.c.inc | 1 + 1 file changed, 1 insertion(+) diff --git a/target/riscv/insn_trans/trans_rvv.c.inc b/target/riscv/insn_trans/trans_rvv.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_rvv.c.inc +++ b/target/riscv/insn_trans/trans_rvv.c.inc @@ -XXX,XX +XXX,XX @@ GEN_OPIVV_TRANS(vredxor_vs, reduction_check) static bool reduction_widen_check(DisasContext *s, arg_rmrr *a) { return reduction_check(s, a) && (s->sew < MO_64) && + !is_overlapped(a->rs1, 1, a->rs2, 1 << MAX(s->lmul, 0)) && ((s->sew + 1) <= (s->cfg_ptr->elen >> 4)); } -- 2.53.0 From: Frank Chang <frank.chang@sifive.com> It's possible that the transmit watermark level (txctrl.txcnt) is updated when the user writes to txctrl register, which may decrease the transmit watermark level to less than the number of entries in the transmit FIFO. In such a case, the interrupt should be raised so we need to call sifive_uart_update_irq() to check and update interrupt when txctrl register is written. Otherwise, the interrupt will have to be delayed until next TX FIFO transmission is processed. Suggested-by: Chao Liu <chao.liu.zevorn@gmail.com> Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260513030503.3665414-1-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/char/sifive_uart.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/char/sifive_uart.c b/hw/char/sifive_uart.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/sifive_uart.c +++ b/hw/char/sifive_uart.c @@ -XXX,XX +XXX,XX @@ sifive_uart_write(void *opaque, hwaddr addr, if (SIFIVE_UART_TXEN(s->txctrl) && !fifo8_is_empty(&s->tx_fifo)) { sifive_uart_trigger_tx_fifo(s); } + sifive_uart_update_irq(s); return; case SIFIVE_UART_RXCTRL: s->rxctrl = val64; -- 2.53.0 From: Abhigyan Kumar <314abh@gmail.com> RISC-V Privileged Specification 3.1.8 (Machine Trap Delegation Registers (medeleg and mideleg)) mentions: "For exceptions that cannot occur in less privileged modes, the corresponding medeleg bits should be read-only zero. In particular, medeleg[11] is read-only zero." QEMU incorrectly included RISCV_EXCP_M_ECALL in DELEGABLE_EXCPS. It allowed the 11th bit to be written and read as set. Fixed by removing it from the DELEGABLE_EXCPS mask, adhering to the specification. Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3438 Signed-off-by: Abhigyan Kumar <314abh@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260427060849.749179-2-314abh@gmail.com> [ Changes by AF: - Remove comment ] Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 1 - 1 file changed, 1 deletion(-) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static const uint64_t all_ints = M_MODE_INTERRUPTS | S_MODE_INTERRUPTS | (1ULL << (RISCV_EXCP_U_ECALL)) | \ (1ULL << (RISCV_EXCP_S_ECALL)) | \ (1ULL << (RISCV_EXCP_VS_ECALL)) | \ - (1ULL << (RISCV_EXCP_M_ECALL)) | \ (1ULL << (RISCV_EXCP_INST_PAGE_FAULT)) | \ (1ULL << (RISCV_EXCP_LOAD_PAGE_FAULT)) | \ (1ULL << (RISCV_EXCP_STORE_PAGE_FAULT)) | \ -- 2.53.0 From: "chen.zhongyao@zte.com.cn" <chen.zhongyao@zte.com.cn> The risc-v vector spec defines vmv.s.x and vfmv.s.f as writing element 0 of the destination register while the remaining destination elements follow the current tail policy. When QEMU runs with rvv_ta_all_1s enabled, those elements must therefore become all 1s. QEMU handled both instructions as translation-time special cases that directly wrote vd[0] and skipped the usual tail processing. As a result, vmv.s.x and vfmv.s.f left the remaining destination elements unchanged instead of applying the configured tail policy. Fix this by routing both instructions through a helper that writes vd[0] and then treats the rest of the destination register as tail, reusing the existing agnostic-element fill logic. Signed-off-by: Zhongyao Chen <chen.zhongyao@zte.com.cn> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <202605061005.646A537u037157@mse-fl1.zte.com.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/helper.h | 4 +++ target/riscv/vector_helper.c | 18 ++++++++++ target/riscv/insn_trans/trans_rvv.c.inc | 44 ++++++++----------------- 3 files changed, 36 insertions(+), 30 deletions(-) diff --git a/target/riscv/helper.h b/target/riscv/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/helper.h +++ b/target/riscv/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_4(vmv_v_x_b, void, ptr, i64, env, i32) DEF_HELPER_4(vmv_v_x_h, void, ptr, i64, env, i32) DEF_HELPER_4(vmv_v_x_w, void, ptr, i64, env, i32) DEF_HELPER_4(vmv_v_x_d, void, ptr, i64, env, i32) +DEF_HELPER_4(vset_velem0_b, void, ptr, i64, env, i32) +DEF_HELPER_4(vset_velem0_h, void, ptr, i64, env, i32) +DEF_HELPER_4(vset_velem0_w, void, ptr, i64, env, i32) +DEF_HELPER_4(vset_velem0_d, void, ptr, i64, env, i32) DEF_HELPER_6(vsaddu_vv_b, void, ptr, ptr, ptr, ptr, env, i32) DEF_HELPER_6(vsaddu_vv_h, void, ptr, ptr, ptr, ptr, env, i32) diff --git a/target/riscv/vector_helper.c b/target/riscv/vector_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/vector_helper.c +++ b/target/riscv/vector_helper.c @@ -XXX,XX +XXX,XX @@ GEN_VEXT_VMV_VX(vmv_v_x_h, int16_t, H2) GEN_VEXT_VMV_VX(vmv_v_x_w, int32_t, H4) GEN_VEXT_VMV_VX(vmv_v_x_d, int64_t, H8) +#define GEN_VEXT_SET_VELEM0(NAME, ETYPE, H) \ +void HELPER(NAME)(void *vd, uint64_t s1, CPURISCVState *env, \ + uint32_t desc) \ +{ \ + uint32_t esz = sizeof(ETYPE); \ + uint32_t vlenb = riscv_cpu_cfg(env)->vlenb; \ + uint32_t vta = vext_vta(desc); \ + \ + *((ETYPE *)vd + H(0)) = (ETYPE)s1; \ + /* Treat every element past vd[0] as tail for scalar-to-vector moves. */ \ + vext_set_elems_1s(vd, vta, esz, vlenb); \ +} + +GEN_VEXT_SET_VELEM0(vset_velem0_b, int8_t, H1) +GEN_VEXT_SET_VELEM0(vset_velem0_h, int16_t, H2) +GEN_VEXT_SET_VELEM0(vset_velem0_w, int32_t, H4) +GEN_VEXT_SET_VELEM0(vset_velem0_d, int64_t, H8) + #define GEN_VEXT_VMERGE_VV(NAME, ETYPE, H) \ void HELPER(NAME)(void *vd, void *v0, void *vs1, void *vs2, \ CPURISCVState *env, uint32_t desc) \ diff --git a/target/riscv/insn_trans/trans_rvv.c.inc b/target/riscv/insn_trans/trans_rvv.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_rvv.c.inc +++ b/target/riscv/insn_trans/trans_rvv.c.inc @@ -XXX,XX +XXX,XX @@ static void vec_element_loadi(DisasContext *s, TCGv_i64 dest, load_element(dest, tcg_env, endian_ofs(s, vreg, idx), s->sew, sign); } -/* Integer Scalar Move Instruction */ +typedef void gen_helper_vset_velem0(TCGv_ptr, TCGv_i64, TCGv_env, TCGv_i32); -static void store_element(TCGv_i64 val, TCGv_ptr base, - int ofs, int sew) +static void vec_element_storei_tail(DisasContext *s, int vreg, TCGv_i64 val) { - switch (sew) { - case MO_8: - tcg_gen_st8_i64(val, base, ofs); - break; - case MO_16: - tcg_gen_st16_i64(val, base, ofs); - break; - case MO_32: - tcg_gen_st32_i64(val, base, ofs); - break; - case MO_64: - tcg_gen_st_i64(val, base, ofs); - break; - default: - g_assert_not_reached(); - } -} + static gen_helper_vset_velem0 * const fns[4] = { + gen_helper_vset_velem0_b, gen_helper_vset_velem0_h, + gen_helper_vset_velem0_w, gen_helper_vset_velem0_d, + }; + TCGv_ptr dest = tcg_temp_new_ptr(); + uint32_t data = FIELD_DP32(0, VDATA, VTA, s->vta); + TCGv_i32 desc = tcg_constant_i32(simd_desc(s->cfg_ptr->vlenb, + s->cfg_ptr->vlenb, data)); -/* - * Store vreg[idx] = val. - * The index must be in range of VLMAX. - */ -static void vec_element_storei(DisasContext *s, int vreg, - int idx, TCGv_i64 val) -{ - store_element(val, tcg_env, endian_ofs(s, vreg, idx), s->sew); + tcg_gen_addi_ptr(dest, tcg_env, vreg_ofs(s, vreg)); + fns[s->sew](dest, val, tcg_env, desc); } /* vmv.x.s rd, vs2 # x[rd] = vs2[0] */ @@ -XXX,XX +XXX,XX @@ static bool trans_vmv_s_x(DisasContext *s, arg_vmv_s_x *a) */ s1 = get_gpr(s, a->rs1, EXT_NONE); tcg_gen_ext_tl_i64(t1, s1); - vec_element_storei(s, a->rd, 0, t1); + vec_element_storei_tail(s, a->rd, t1); gen_set_label(over); tcg_gen_movi_tl(cpu_vstart, 0); finalize_rvv_inst(s); @@ -XXX,XX +XXX,XX @@ static bool trans_vfmv_s_f(DisasContext *s, arg_vfmv_s_f *a) t1 = tcg_temp_new_i64(); do_nanbox(s, t1, cpu_fpr[a->rs1]); - vec_element_storei(s, a->rd, 0, t1); + vec_element_storei_tail(s, a->rd, t1); gen_set_label(over); tcg_gen_movi_tl(cpu_vstart, 0); -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> The RISC-V unpriv specification (zvk.adoc) states that "Zvknhb implies Zvknha". This means that enabling Zvknhb should automatically enable Zvknha. Add Zvknha to ZVKNHB_IMPLIED to ensure the dependency is correctly enforced. This issue was discovered and reported by SpecHunter, an AI-driven architecture specification analysis tool. Link:https://github.com/yizishun/rv-isa-sec/blob/master/output/riscv-isa-manual/pr-2635/qemu.txt Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260511051736.2916225-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static RISCVCPUImpliedExtsRule ZVKNG_IMPLIED = { static RISCVCPUImpliedExtsRule ZVKNHB_IMPLIED = { .ext = CPU_CFG_OFFSET(ext_zvknhb), .implied_multi_exts = { - CPU_CFG_OFFSET(ext_zve64x), + CPU_CFG_OFFSET(ext_zve64x), CPU_CFG_OFFSET(ext_zvknha), RISCV_IMPLIED_EXTS_RULE_END }, -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> Currently, the MENVCFG_CDE (Counter Delegation Enable) bit is unconditionally included in the base write mask for CSR_MENVCFG. This make the subsequent conditional check `(cfg->ext_smcdeleg ? MENVCFG_CDE : 0)` completely ineffective, as a bitwise OR cannot clear a bit that is already set. Fix this by removing MENVCFG_CDE from the initial base mask. The bit will now only be writable when explicitly granted by the `ext_smcdeleg` configuration. This issue was discovered and reported by SpecHunter, an AI-driven architecture specification analysis tool. Link: https://github.com/yizishun/rv-isa-sec/blob/master/output/riscv-isa-manual/pr-2601/qemu.txt Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260511040534.2862443-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException write_menvcfg(CPURISCVState *env, int csrno, { const RISCVCPUConfig *cfg = riscv_cpu_cfg(env); uint64_t mask = MENVCFG_FIOM | MENVCFG_CBIE | MENVCFG_CBCFE | - MENVCFG_CBZE | MENVCFG_CDE; + MENVCFG_CBZE; bool stce_changed = false; if (riscv_cpu_mxl(env) == MXL_RV64) { -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> According to the RISC-V smcdeleg specification: "When menvcfg.CDE=0, attempts to access scountinhibit raise an illegal-instruction exception." The current implementation of scountinhibit_pred() only checks the hardware extensions (ext_ssccfg, ext_smcdeleg) and virtualization status, but completely misses the runtime environment configuration check (menvcfg.CDE). This allows S-mode to access scountinhibit even when the M-mode has explicitly disabled counter delegation. This issue was discovered by the SpecHunter tool (https://github.com/yizishun/rv-isa-sec/blob/master/output/riscv-isa-manual/pr-2571/qemu.txt). Fixes: 6247dc2ef70b ("target/riscv: Add counter delegation/configuration support") Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260508174917.371667-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException scountinhibit_pred(CPURISCVState *env, int csrno) return RISCV_EXCP_ILLEGAL_INST; } + if (!get_field(env->menvcfg, MENVCFG_CDE)) { + return RISCV_EXCP_ILLEGAL_INST; + } + if (env->virt_enabled) { return RISCV_EXCP_VIRT_INSTRUCTION_FAULT; } -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> According to the RISC-V Privileged Manual: "The Sv32 page-based virtual-memory scheme described in sv32 supports 34-bit physical addresses for RV32, so the PMP scheme must support addresses wider than XLEN for RV32." However, the current QEMU implementation uses `target_ulong` (which resolves to `uint32_t` on RV32) for PMP address variables. When shifting these addresses left (e.g., `this_addr << 2`), an integer overflow occurs, truncating the high bits of the 34-bit physical address. Fix this issue by changing the types of PMP address variables (`this_addr` and `prev_addr`) to `hwaddr`. This issue was discovered and reported by SpecHunter, an AI-driven architecture specification analysis tool. Link: https://github.com/yizishun/rv-isa-sec/blob/master/output/riscv-isa-manual/pr-2472/qemu.txt Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260511102627.3120140-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/pmp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/riscv/pmp.c b/target/riscv/pmp.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/pmp.c +++ b/target/riscv/pmp.c @@ -XXX,XX +XXX,XX @@ static void pmp_decode_napot(hwaddr a, hwaddr *sa, hwaddr *ea) void pmp_update_rule_addr(CPURISCVState *env, uint32_t pmp_index) { uint8_t this_cfg = env->pmp_state.pmp[pmp_index].cfg_reg; - target_ulong this_addr = env->pmp_state.pmp[pmp_index].addr_reg; - target_ulong prev_addr = 0u; + hwaddr this_addr = env->pmp_state.pmp[pmp_index].addr_reg; + hwaddr prev_addr = 0u; hwaddr sa = 0u; hwaddr ea = 0u; int g = pmp_get_granularity_g(env); -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> Currently, the Machine Security Configuration Register (mseccfg) was missing from the live migration state. This omission causes the register to be reset to zero on the destination host after migration. Fixed by adding vmstate_mseccfg subsection This vulnerability was discovered and reported by SpecHunter, an AI-driven architecture specification analysis tool. Link: https://github.com/yizishun/rv-isa-sec/blob/a22e4459cd026ae970791dfbd9cfe5d110fbd46b/output/riscv-isa-manual/pr-1879/qemu.txt#L121 Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260511124828.3210477-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/machine.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/target/riscv/machine.c b/target/riscv/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/machine.c +++ b/target/riscv/machine.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_sstc = { } }; +static bool mseccfg_needed(void *opaque) +{ + RISCVCPU *cpu = opaque; + + return cpu->cfg.ext_smepmp || cpu->cfg.ext_zkr + || cpu->cfg.ext_smmpm || cpu->cfg.ext_zicfilp; +} + +static const VMStateDescription vmstate_mseccfg = { + .name = "cpu/mseccfg", + .version_id = 1, + .minimum_version_id = 1, + .needed = mseccfg_needed, + .fields = (const VMStateField[]) { + VMSTATE_UINTTL(env.mseccfg, RISCVCPU), + VMSTATE_END_OF_LIST() + } +}; + const VMStateDescription vmstate_riscv_cpu = { .name = "cpu", .version_id = 11, @@ -XXX,XX +XXX,XX @@ const VMStateDescription vmstate_riscv_cpu = { &vmstate_ssp, &vmstate_ctr, &vmstate_sstc, + &vmstate_mseccfg, NULL } }; -- 2.53.0 From: Alistair Francis <alistair.francis@wdc.com> The RISC-V spec describes bits 0-15 as standard fixed interrupts. The AIA spec on the other hand describes bits 0-12 as standard fixed interrupts. This conflict causes issues for us as we don't dynamically determine if AIA is enabled when setting the *delegable_ints consts. This means currently we incorrectly treat the LCOFIP bit as delegable, even if AIA is disabled, which is incorrect (see the issues mentioned below). The AIA spec indicates that implementations can determine which bits of 13-63 in mvien are writable, so let's just make it bits 15-63 to match the main spec. Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3133 Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3134 Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3135 Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3138 Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3140 Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260513051841.1671987-1-alistair.francis@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException write_stimecmph(CPURISCVState *env, int csrno, #define VSTOPI_NUM_SRCS 5 /* - * All core local interrupts except the fixed ones 0:12. This macro is for + * All core local interrupts except the fixed ones 0:15. This macro is for * virtual interrupts logic so please don't change this to avoid messing up * the whole support, For reference see AIA spec: `5.3 Interrupt filtering and * virtual interrupts for supervisor level` and `6.3.2 Virtual interrupts for * VS level`. */ -#define LOCAL_INTERRUPTS (~0x1FFFULL) +#define LOCAL_INTERRUPTS (~0xFFFFULL) static const uint64_t delegable_ints = S_MODE_INTERRUPTS | VS_MODE_INTERRUPTS | MIP_LCOFIP; -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> Currently, the `mseccfg` CSR is only cleared to 0 during reset if the `ext_smepmp` is enabled. However, this register is now shared by several other extensions such as `zkr`, `smmpm`, and `zicfilp`. Fix by clearing `mseccfg` if any dependent extension is present, and adjusting the relevant comments. This vulnerability was discovered and reported by SpecHunter, an AI-driven architecture specification analysis tool. Link: https://github.com/yizishun/rv-isa-sec/blob/master/output/riscv-svvptc/pr-134/qemu.txt Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260512052240.330815-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_reset_hold(Object *obj, ResetType type) /* * Clear mseccfg and unlock all the PMP entries upon reset. - * This is allowed as per the priv and smepmp specifications - * and is needed to clear stale entries across reboots. + * This is required as per the priv, smepmp, and other security + * extension specifications that share this CSR, and is needed + * to clear stale entries across reboots. */ - if (riscv_cpu_cfg(env)->ext_smepmp) { + if (riscv_cpu_cfg(env)->ext_smepmp || + riscv_cpu_cfg(env)->ext_zkr || + riscv_cpu_cfg(env)->ext_smmpm || + riscv_cpu_cfg(env)->ext_zicfilp) { env->mseccfg = 0; } -- 2.53.0 From: Zongmin Zhou <zhouzongmin@kylinos.cn> When the Zicbop extension is available expose it to the KVM guest. Also read and validate cbop_blocksize from the host via KVM interface. Signed-off-by: Zongmin Zhou <zhouzongmin@kylinos.cn> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <9e388aa9984ea9d3d0c85e1630c9195023938952.1778653159.git.zhouzongmin@kylinos.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/kvm/kvm-cpu.c | 34 ++++++++++++++++++++++++++++++++-- 1 file changed, 32 insertions(+), 2 deletions(-) diff --git a/target/riscv/kvm/kvm-cpu.c b/target/riscv/kvm/kvm-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/kvm/kvm-cpu.c +++ b/target/riscv/kvm/kvm-cpu.c @@ -XXX,XX +XXX,XX @@ static void kvm_cpu_csr_set_u64(RISCVCPU *cpu, KVMCPUConfig *csr_cfg, static KVMCPUConfig kvm_multi_ext_cfgs[] = { KVM_EXT_CFG("zicbom", ext_zicbom, KVM_RISCV_ISA_EXT_ZICBOM), + KVM_EXT_CFG("zicbop", ext_zicbop, KVM_RISCV_ISA_EXT_ZICBOP), KVM_EXT_CFG("zicboz", ext_zicboz, KVM_RISCV_ISA_EXT_ZICBOZ), KVM_EXT_CFG("ziccrse", ext_ziccrse, KVM_RISCV_ISA_EXT_ZICCRSE), KVM_EXT_CFG("zicntr", ext_zicntr, KVM_RISCV_ISA_EXT_ZICNTR), @@ -XXX,XX +XXX,XX @@ static KVMCPUConfig kvm_cboz_blocksize = { .kvm_reg_id = KVM_REG_RISCV_CONFIG_REG(zicboz_block_size) }; +static KVMCPUConfig kvm_cbop_blocksize = { + .name = "cbop_blocksize", + .offset = CPU_CFG_OFFSET(cbop_blocksize), + .kvm_reg_id = KVM_REG_RISCV_CONFIG_REG(zicbop_block_size) +}; + static KVMCPUConfig kvm_v_vlenb = { .name = "vlenb", .offset = CPU_CFG_OFFSET(vlenb), @@ -XXX,XX +XXX,XX @@ static void kvm_riscv_init_cfg(RISCVCPU *cpu, KVMScratchCPU *kvmcpu) kvm_riscv_read_cbomz_blksize(cpu, kvmcpu, &kvm_cbom_blocksize); } + if (cpu->cfg.ext_zicbop) { + kvm_riscv_read_cbomz_blksize(cpu, kvmcpu, &kvm_cbop_blocksize); + } + if (cpu->cfg.ext_zicboz) { kvm_riscv_read_cbomz_blksize(cpu, kvmcpu, &kvm_cboz_blocksize); } @@ -XXX,XX +XXX,XX @@ void riscv_kvm_cpu_finalize_features(RISCVCPU *cpu, Error **errp) int ret; /* short-circuit without spinning the scratch CPU */ - if (!cpu->cfg.ext_zicbom && !cpu->cfg.ext_zicboz && - !riscv_has_ext(env, RVV)) { + if (!cpu->cfg.ext_zicbom && !cpu->cfg.ext_zicbop && + !cpu->cfg.ext_zicboz && !riscv_has_ext(env, RVV)) { return; } @@ -XXX,XX +XXX,XX @@ void riscv_kvm_cpu_finalize_features(RISCVCPU *cpu, Error **errp) } } + if (cpu->cfg.ext_zicbop && + riscv_cpu_option_set(kvm_cbop_blocksize.name)) { + + reg.id = KVM_RISCV_REG_ID_ULONG(KVM_REG_RISCV_CONFIG, + kvm_cbop_blocksize.kvm_reg_id); + reg.addr = (uint64_t)&val; + ret = ioctl(kvmcpu.cpufd, KVM_GET_ONE_REG, &reg); + if (ret != 0) { + error_setg_errno(errp, errno, "Unable to read cbop_blocksize"); + return; + } + + if (cpu->cfg.cbop_blocksize != val) { + error_setg(errp, "Unable to set cbop_blocksize to a different " + "value than the host (%lu)", val); + return; + } + } + /* Users are setting vlen, not vlenb */ if (riscv_has_ext(env, RVV) && riscv_cpu_option_set("vlen")) { if (!kvm_v_vlenb.supported) { -- 2.53.0 From: Zongmin Zhou <zhouzongmin@kylinos.cn> Expose the BFloat16 extensions (Zfbfmin, Zvfbfmin, Zvfbfwma) to KVM guests when available in hardware. Signed-off-by: Zongmin Zhou <zhouzongmin@kylinos.cn> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <1258febb0eeb4ee286eb88f70b077a7f1ece507f.1778653159.git.zhouzongmin@kylinos.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/kvm/kvm-cpu.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/target/riscv/kvm/kvm-cpu.c b/target/riscv/kvm/kvm-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/kvm/kvm-cpu.c +++ b/target/riscv/kvm/kvm-cpu.c @@ -XXX,XX +XXX,XX @@ static KVMCPUConfig kvm_multi_ext_cfgs[] = { KVM_EXT_CFG("zacas", ext_zacas, KVM_RISCV_ISA_EXT_ZACAS), KVM_EXT_CFG("zawrs", ext_zawrs, KVM_RISCV_ISA_EXT_ZAWRS), KVM_EXT_CFG("zfa", ext_zfa, KVM_RISCV_ISA_EXT_ZFA), + KVM_EXT_CFG("zfbfmin", ext_zfbfmin, KVM_RISCV_ISA_EXT_ZFBFMIN), KVM_EXT_CFG("zfh", ext_zfh, KVM_RISCV_ISA_EXT_ZFH), KVM_EXT_CFG("zfhmin", ext_zfhmin, KVM_RISCV_ISA_EXT_ZFHMIN), KVM_EXT_CFG("zba", ext_zba, KVM_RISCV_ISA_EXT_ZBA), @@ -XXX,XX +XXX,XX @@ static KVMCPUConfig kvm_multi_ext_cfgs[] = { KVM_EXT_CFG("zvbc", ext_zvbc, KVM_RISCV_ISA_EXT_ZVBC), KVM_EXT_CFG("zvfh", ext_zvfh, KVM_RISCV_ISA_EXT_ZVFH), KVM_EXT_CFG("zvfhmin", ext_zvfhmin, KVM_RISCV_ISA_EXT_ZVFHMIN), + KVM_EXT_CFG("zvfbfmin", ext_zvfbfmin, KVM_RISCV_ISA_EXT_ZVFBFMIN), + KVM_EXT_CFG("zvfbfwma", ext_zvfbfwma, KVM_RISCV_ISA_EXT_ZVFBFWMA), KVM_EXT_CFG("zvkb", ext_zvkb, KVM_RISCV_ISA_EXT_ZVKB), KVM_EXT_CFG("zvkg", ext_zvkg, KVM_RISCV_ISA_EXT_ZVKG), KVM_EXT_CFG("zvkned", ext_zvkned, KVM_RISCV_ISA_EXT_ZVKNED), -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> Fix a mode-to-capability comparison error in riscv_iommu_validate_device_ctx. The code was comparing fsc_mode (a value) against a capability bitmask, making the SV32 support check ineffective. This issue was discovered and reported by SpecHunter, an AI-driven architecture specification analysis tool. Link: https://github.com/yizishun/rv-isa-sec/blob/master/output/riscv-iommu/pr-694/qemu.txt Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260511080904.3049446-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/riscv/riscv-iommu.c b/hw/riscv/riscv-iommu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.c +++ b/hw/riscv/riscv-iommu.c @@ -XXX,XX +XXX,XX @@ static bool riscv_iommu_validate_device_ctx(RISCVIOMMUState *s, } if (ctx->tc & RISCV_IOMMU_DC_TC_SXL) { - if (fsc_mode == RISCV_IOMMU_CAP_SV32 && + if (fsc_mode == RISCV_IOMMU_DC_FSC_IOSATP_MODE_SV32 && !(s->cap & RISCV_IOMMU_CAP_SV32)) { return false; } -- 2.53.0 From: Chengbo Gao <gaochengbo@bosc.ac.cn> PCI bus numbers may still be unassigned when QEMU initializes a PCI device's bus-master address space. For devices behind bridges, pci_bus_num() can return 0 at that point because the guest has not yet programmed the bridge Secondary Bus Number register. The RISC-V IOMMU currently stores a fixed device_id in RISCVIOMMUSpace when the address space is created. If the guest later enumerates the device on a non-zero bus, DMA translation still uses the stale device_id and may look up the wrong device context in the DDT. Store the stable PCIBus pointer and devfn in RISCVIOMMUSpace instead, and compute the device_id from the current bus number when it is needed. This keeps DMA translation and ATS invalidation in sync with guest PCI bus enumeration. Signed-off-by: Chengbo Gao <gaochengbo@bosc.ac.cn> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260514020637.2819308-1-gaochengbo@bosc.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu.c | 40 +++++++++++++++++++++++++--------------- 1 file changed, 25 insertions(+), 15 deletions(-) diff --git a/hw/riscv/riscv-iommu.c b/hw/riscv/riscv-iommu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.c +++ b/hw/riscv/riscv-iommu.c @@ -XXX,XX +XXX,XX @@ struct RISCVIOMMUSpace { IOMMUMemoryRegion iova_mr; /* IOVA memory region for attached device */ AddressSpace iova_as; /* IOVA address space for attached device */ RISCVIOMMUState *iommu; /* Managing IOMMU device state */ - uint32_t devid; /* Requester identifier, AKA device_id */ + PCIBus *bus; /* PCI bus of the requester */ + uint8_t devfn; /* Requester identifier, AKA device_id */ bool notifier; /* IOMMU unmap notifier enabled */ QLIST_ENTRY(RISCVIOMMUSpace) list; }; @@ -XXX,XX +XXX,XX @@ struct RISCVIOMMUEntry { /* IOMMU index for transactions without process_id specified. */ #define RISCV_IOMMU_NOPROCID 0 +static uint32_t riscv_iommu_space_devid(RISCVIOMMUSpace *as) +{ + uint32_t devid = PCI_BUILD_BDF(pci_bus_num(as->bus), as->devfn); + + /* FIXME: PCIe bus remapping for attached endpoints. */ + devid |= as->iommu->bus << 8; + return devid; +} + static uint8_t riscv_iommu_get_icvec_vector(uint32_t icvec, uint32_t vec_type) { switch (vec_type) { @@ -XXX,XX +XXX,XX @@ static void riscv_iommu_ctx_put(RISCVIOMMUState *s, void *ref) } /* Find or allocate address space for a given device */ -static AddressSpace *riscv_iommu_space(RISCVIOMMUState *s, uint32_t devid) +static AddressSpace *riscv_iommu_space(RISCVIOMMUState *s, PCIBus *bus, + int devfn) { RISCVIOMMUSpace *as; - /* FIXME: PCIe bus remapping for attached endpoints. */ - devid |= s->bus << 8; - QLIST_FOREACH(as, &s->spaces, list) { - if (as->devid == devid) { + if (as->bus == bus && as->devfn == devfn) { break; } } @@ -XXX,XX +XXX,XX @@ static AddressSpace *riscv_iommu_space(RISCVIOMMUState *s, uint32_t devid) as = g_new0(RISCVIOMMUSpace, 1); as->iommu = s; - as->devid = devid; + as->bus = bus; + as->devfn = devfn; snprintf(name, sizeof(name), "riscv-iommu-%04x:%02x.%d-iova", - PCI_BUS_NUM(as->devid), PCI_SLOT(as->devid), PCI_FUNC(as->devid)); + pci_bus_num(bus), PCI_SLOT(devfn), PCI_FUNC(devfn)); /* IOVA address space, untranslated addresses */ memory_region_init_iommu(&as->iova_mr, sizeof(as->iova_mr), @@ -XXX,XX +XXX,XX @@ static AddressSpace *riscv_iommu_space(RISCVIOMMUState *s, uint32_t devid) QLIST_INSERT_HEAD(&s->spaces, as, list); - trace_riscv_iommu_new(s->parent_obj.id, PCI_BUS_NUM(as->devid), - PCI_SLOT(as->devid), PCI_FUNC(as->devid)); + trace_riscv_iommu_new(s->parent_obj.id, pci_bus_num(bus), + PCI_SLOT(devfn), PCI_FUNC(devfn)); } return &as->iova_as; } @@ -XXX,XX +XXX,XX @@ static void riscv_iommu_ats(RISCVIOMMUState *s, pid = get_field(cmd->dword0, RISCV_IOMMU_CMD_ATS_PID); QLIST_FOREACH(as, &s->spaces, list) { - if (as->devid == devid) { + if (riscv_iommu_space_devid(as) == devid) { break; } } @@ -XXX,XX +XXX,XX @@ static IOMMUTLBEntry riscv_iommu_memory_region_translate( .addr_mask = ~0ULL, .perm = flag, }; + uint32_t devid = riscv_iommu_space_devid(as); - ctx = riscv_iommu_ctx(as->iommu, as->devid, iommu_idx, &ref); + ctx = riscv_iommu_ctx(as->iommu, devid, iommu_idx, &ref); if (ctx == NULL) { /* Translation disabled or invalid. */ iotlb.addr_mask = 0; @@ -XXX,XX +XXX,XX @@ static IOMMUTLBEntry riscv_iommu_memory_region_translate( } /* Trace all dma translations with original access flags. */ - trace_riscv_iommu_dma(as->iommu->parent_obj.id, PCI_BUS_NUM(as->devid), - PCI_SLOT(as->devid), PCI_FUNC(as->devid), iommu_idx, + trace_riscv_iommu_dma(as->iommu->parent_obj.id, PCI_BUS_NUM(devid), + PCI_SLOT(devid), PCI_FUNC(devid), iommu_idx, IOMMU_FLAG_STR[flag & IOMMU_RW], iotlb.iova, iotlb.translated_addr); @@ -XXX,XX +XXX,XX @@ static AddressSpace *riscv_iommu_find_as(PCIBus *bus, void *opaque, int devfn) /* Find first matching IOMMU */ while (s != NULL && as == NULL) { - as = riscv_iommu_space(s, PCI_BUILD_BDF(pci_bus_num(bus), devfn)); + as = riscv_iommu_space(s, bus, devfn); s = s->iommus.le_next; } -- 2.53.0 From: Guenter Roeck <linux@roeck-us.net> Minimal clock register configuration required to boot Linux without backtraces in the clock code. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260514-reference-overhand-749149e36a88@spud> [ Changes by AF: - Fixup checkpatch errors ] Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/misc/mchp_pfsoc_ioscb.h | 2 ++ hw/misc/mchp_pfsoc_ioscb.c | 47 +++++++++++++++++++++++++++++- hw/misc/mchp_pfsoc_sysreg.c | 13 +++++++++ 3 files changed, 61 insertions(+), 1 deletion(-) diff --git a/include/hw/misc/mchp_pfsoc_ioscb.h b/include/hw/misc/mchp_pfsoc_ioscb.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/mchp_pfsoc_ioscb.h +++ b/include/hw/misc/mchp_pfsoc_ioscb.h @@ -XXX,XX +XXX,XX @@ typedef struct MchpPfSoCIoscbState { MemoryRegion mailbox; MemoryRegion cfg; MemoryRegion ccc; + MemoryRegion pll_nw_0; + MemoryRegion pll_nw_1; MemoryRegion pll_mss; MemoryRegion cfm_mss; MemoryRegion pll_ddr; diff --git a/hw/misc/mchp_pfsoc_ioscb.c b/hw/misc/mchp_pfsoc_ioscb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/mchp_pfsoc_ioscb.c +++ b/hw/misc/mchp_pfsoc_ioscb.c @@ -XXX,XX +XXX,XX @@ #define IOSCB_MAILBOX_BASE 0x07020800 #define IOSCB_CFG_BASE 0x07080000 #define IOSCB_CCC_BASE 0x08000000 +#define IOSCB_PLL_NW0_BASE 0x08100000 +#define IOSCB_PLL_NW1_BASE 0x08200000 #define IOSCB_PLL_MSS_BASE 0x0E001000 #define IOSCB_CFM_MSS_BASE 0x0E002000 #define IOSCB_PLL_DDR_BASE 0x0E010000 @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps mchp_pfsoc_dummy_ops = { /* All PLL modules in IOSCB have the same register layout */ #define PLL_CTRL 0x04 +#define PLL_REF_FB 0x08 +#define PLL_DIV_0_1 0x10 +#define PLL_DIV_2_3 0x14 +#define PLL_CTRL2 0x18 +#define PLL_CAL 0x1c +#define PLL_PHADJ 0x20 +#define SSCG_REG_0 0x24 +#define SSCG_REG_1 0x28 +#define SSCG_REG_2 0x2c +#define SSCG_REG_3 0x30 static uint64_t mchp_pfsoc_pll_read(void *opaque, hwaddr offset, unsigned size) @@ -XXX,XX +XXX,XX @@ static uint64_t mchp_pfsoc_pll_read(void *opaque, hwaddr offset, /* PLL is locked */ val = BIT(25); break; + case PLL_DIV_0_1: + case PLL_DIV_2_3: + val = 0x01000100; /* return valid post divider values */ + break; + case PLL_CTRL2: + val = 0x00001110; + break; + case PLL_REF_FB: + val = 0x00000100; /* RFDIV := 1 */ + break; + case SSCG_REG_2: + val = 0x00000001; /* INTIN := 1 */ + break; + case PLL_PHADJ: + val = 0x00000401; + break; default: qemu_log_mask(LOG_UNIMP, "%s: unimplemented device read " "(size %d, offset 0x%" HWADDR_PRIx ")\n", @@ -XXX,XX +XXX,XX @@ static uint64_t mchp_pfsoc_pll_read(void *opaque, hwaddr offset, return val; } +static void mchp_pfsoc_pll_write(void *opaque, hwaddr offset, + uint64_t value, unsigned size) +{ + qemu_log_mask(LOG_UNIMP, "%s: unimplemented device write " + "(size %d, value 0x%" PRIx64 + ", offset 0x%" HWADDR_PRIx ")\n", + __func__, size, value, offset); +} + static const MemoryRegionOps mchp_pfsoc_pll_ops = { .read = mchp_pfsoc_pll_read, - .write = mchp_pfsoc_dummy_write, + .write = mchp_pfsoc_pll_write, .endianness = DEVICE_LITTLE_ENDIAN, }; @@ -XXX,XX +XXX,XX @@ static void mchp_pfsoc_ioscb_realize(DeviceState *dev, Error **errp) "mchp.pfsoc.ioscb.ccc", IOSCB_CCC_REG_SIZE); memory_region_add_subregion(&s->container, IOSCB_CCC_BASE, &s->ccc); + memory_region_init_io(&s->pll_nw_0, OBJECT(s), &mchp_pfsoc_pll_ops, s, + "mchp.pfsoc.ioscb.pll_nw_0", IOSCB_SUBMOD_REG_SIZE); + memory_region_add_subregion(&s->container, IOSCB_PLL_NW0_BASE, &s->pll_nw_0); + + memory_region_init_io(&s->pll_nw_1, OBJECT(s), &mchp_pfsoc_pll_ops, s, + "mchp.pfsoc.ioscb.pll_nw_1", IOSCB_SUBMOD_REG_SIZE); + memory_region_add_subregion(&s->container, IOSCB_PLL_NW1_BASE, &s->pll_nw_1); + memory_region_init_io(&s->pll_mss, OBJECT(s), &mchp_pfsoc_pll_ops, s, "mchp.pfsoc.ioscb.pll_mss", IOSCB_SUBMOD_REG_SIZE); memory_region_add_subregion(&s->container, IOSCB_PLL_MSS_BASE, &s->pll_mss); diff --git a/hw/misc/mchp_pfsoc_sysreg.c b/hw/misc/mchp_pfsoc_sysreg.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/mchp_pfsoc_sysreg.c +++ b/hw/misc/mchp_pfsoc_sysreg.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/mchp_pfsoc_sysreg.h" #include "system/runstate.h" +#define CLOCK_CONFIG_CR 0x8 +#define RTC_CLOCK_CR 0xc #define MSS_RESET_CR 0x18 #define ENVM_CR 0xb8 #define MESSAGE_INT 0x118c @@ -XXX,XX +XXX,XX @@ static uint64_t mchp_pfsoc_sysreg_read(void *opaque, hwaddr offset, uint32_t val = 0; switch (offset) { + case CLOCK_CONFIG_CR: + /* Icicle kit reference design cpu/axi/ahb divider setting */ + val = 0x24; + break; + case RTC_CLOCK_CR: + /* + * Bit 16 enables the RTC clock, 0x7d is the required divider + * setting for a 125 MHz reference. + */ + val = BIT(16) | 0x7d; + break; case ENVM_CR: /* Indicate the eNVM is running at the configured divider rate */ val = BIT(6); -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> The entry was missing from isa_edata_arr[]. Fixes: 32bbab666 ("target/riscv: add draft RISC-V Zbr ext as xbr0p93") Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-2-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(svrsw60t59b, PRIV_VERSION_1_13_0, ext_svrsw60t59b), ISA_EXT_DATA_ENTRY(svukte, PRIV_VERSION_1_13_0, ext_svukte), ISA_EXT_DATA_ENTRY(svvptc, PRIV_VERSION_1_13_0, ext_svvptc), + ISA_EXT_DATA_ENTRY(xlrbr, PRIV_VERSION_1_13_0, ext_xlrbr), ISA_EXT_DATA_ENTRY(xmipscbop, PRIV_VERSION_1_12_0, ext_xmipscbop), ISA_EXT_DATA_ENTRY(xmipscmov, PRIV_VERSION_1_12_0, ext_xmipscmov), ISA_EXT_DATA_ENTRY(xmipslsp, PRIV_VERSION_1_12_0, ext_xmipslsp), -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Noticed when realizing that 'svadu' was too far apart from 'svade'. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-3-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(smcdeleg, PRIV_VERSION_1_13_0, ext_smcdeleg), ISA_EXT_DATA_ENTRY(smcntrpmf, PRIV_VERSION_1_12_0, ext_smcntrpmf), ISA_EXT_DATA_ENTRY(smcsrind, PRIV_VERSION_1_13_0, ext_smcsrind), + ISA_EXT_DATA_ENTRY(smctr, PRIV_VERSION_1_12_0, ext_smctr), ISA_EXT_DATA_ENTRY(smdbltrp, PRIV_VERSION_1_13_0, ext_smdbltrp), ISA_EXT_DATA_ENTRY(smepmp, PRIV_VERSION_1_12_0, ext_smepmp), ISA_EXT_DATA_ENTRY(smpmpmt, PRIV_VERSION_1_12_0, ext_smpmpmt), @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(sscofpmf, PRIV_VERSION_1_12_0, ext_sscofpmf), ISA_EXT_DATA_ENTRY(sscounterenw, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(sscsrind, PRIV_VERSION_1_12_0, ext_sscsrind), + ISA_EXT_DATA_ENTRY(ssctr, PRIV_VERSION_1_12_0, ext_ssctr), ISA_EXT_DATA_ENTRY(ssdbltrp, PRIV_VERSION_1_13_0, ext_ssdbltrp), ISA_EXT_DATA_ENTRY(ssnpm, PRIV_VERSION_1_13_0, ext_ssnpm), ISA_EXT_DATA_ENTRY(sspm, PRIV_VERSION_1_13_0, ext_sspm), @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(ssu64xl, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(supm, PRIV_VERSION_1_13_0, ext_supm), ISA_EXT_DATA_ENTRY(svade, PRIV_VERSION_1_11_0, ext_svade), - ISA_EXT_DATA_ENTRY(smctr, PRIV_VERSION_1_12_0, ext_smctr), - ISA_EXT_DATA_ENTRY(ssctr, PRIV_VERSION_1_12_0, ext_ssctr), ISA_EXT_DATA_ENTRY(svadu, PRIV_VERSION_1_12_0, ext_svadu), ISA_EXT_DATA_ENTRY(svinval, PRIV_VERSION_1_12_0, ext_svinval), ISA_EXT_DATA_ENTRY(svnapot, PRIV_VERSION_1_12_0, ext_svnapot), -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> We want to reduce the usage of the riscv_cpu_* arrays in target/riscv/cpu.c, centering everything in isa_edata_arr[] instead, to reduce data duplication and make our lives a bit easier when adding new extensions. To do that we'll have to make isa_edata_arr[] do what the other arrays are currently doing, not breaking existing semantics in the process. The riscv_cpu_* arrays have a few exclusive uses: - set default extensions for rv32 and rv64; - create user CPU properties; - misc uses around tcg-cpu.c and kvm-cpu.c. We'll slowly make isa_edata_arr[] supersede these arrays. Start by adding a new 'prop_name' field in RISCVIsaExtData. This field is needed because not all extensions have properties and not all properties match the riscv,isa string name. Create two additional macros and reclassify existing isa_edata_arr[] entries as follows: - ISA_EXT_DATA_ENTRY creates an entry where prop_name == riscv,isa. Most of our regular extensions fall into this category; - ISA_EXPERIMENTAL_EXT_DATA_ENTRY: same as above but add a "x-" to the prop name, i.e. prop_name == "x-" + riscv,isa; - ISA_INTERNAL_EXT_DATA_ENTRY: used to declared internal extensions. By 'internal' we mean users/management can't set them on or off. With these new macros we can start our simplification by changing riscv-qmp-cmds to use isa_edata_arr[]. We'll just scroll through it once and gather what we need. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-4-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 1 + target/riscv/cpu.c | 60 +++++++++++++++++++++++------------ target/riscv/riscv-qmp-cmds.c | 30 ++++-------------- 3 files changed, 47 insertions(+), 44 deletions(-) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ extern const RISCVCPUMultiExtConfig riscv_cpu_named_features[]; typedef struct isa_ext_data { const char *name; + const char *prop_name; int min_version; int ext_enable_offset; } RISCVIsaExtData; diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_cfg_merge(RISCVCPUConfig *dest, const RISCVCPUConfig *src) #include "cpu_cfg_fields.h.inc" } +/* Use this for regular user facing extensions */ #define ISA_EXT_DATA_ENTRY(_name, _min_ver, _prop) \ - {#_name, _min_ver, CPU_CFG_OFFSET(_prop)} + {#_name, #_name, _min_ver, CPU_CFG_OFFSET(_prop)} + +/* + * Same as above but for experimental extensions. We'll add a + * "x-" right after "_name" when creating the user property. + */ +#define ISA_EXPERIMENTAL_EXT_DATA_ENTRY(_name, _min_ver, _prop) \ + {#_name, "x-" #_name, _min_ver, CPU_CFG_OFFSET(_prop)} + +/* + * Internal extensions are extensions we will declare in the + * riscv,isa DT but they don't have an user property, i.e. + * users/management can't enable/disable them. + */ +#define ISA_INTERNAL_EXT_DATA_ENTRY(_name, _min_ver, _prop) \ + {#_name, NULL, _min_ver, CPU_CFG_OFFSET(_prop)} /* * Here are the ordering rules of extension naming defined by RISC-V @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_cfg_merge(RISCVCPUConfig *dest, const RISCVCPUConfig *src) * instead. */ const RISCVIsaExtData isa_edata_arr[] = { - ISA_EXT_DATA_ENTRY(zic64b, PRIV_VERSION_1_12_0, ext_zic64b), + ISA_INTERNAL_EXT_DATA_ENTRY(zic64b, PRIV_VERSION_1_12_0, ext_zic64b), ISA_EXT_DATA_ENTRY(zicbom, PRIV_VERSION_1_12_0, ext_zicbom), ISA_EXT_DATA_ENTRY(zicbop, PRIV_VERSION_1_12_0, ext_zicbop), ISA_EXT_DATA_ENTRY(zicboz, PRIV_VERSION_1_12_0, ext_zicboz), - ISA_EXT_DATA_ENTRY(ziccamoa, PRIV_VERSION_1_11_0, has_priv_1_11), - ISA_EXT_DATA_ENTRY(ziccif, PRIV_VERSION_1_11_0, has_priv_1_11), - ISA_EXT_DATA_ENTRY(zicclsm, PRIV_VERSION_1_11_0, has_priv_1_11), + ISA_INTERNAL_EXT_DATA_ENTRY(ziccamoa, PRIV_VERSION_1_11_0, has_priv_1_11), + ISA_INTERNAL_EXT_DATA_ENTRY(ziccif, PRIV_VERSION_1_11_0, has_priv_1_11), + ISA_INTERNAL_EXT_DATA_ENTRY(zicclsm, PRIV_VERSION_1_11_0, has_priv_1_11), ISA_EXT_DATA_ENTRY(ziccrse, PRIV_VERSION_1_11_0, ext_ziccrse), ISA_EXT_DATA_ENTRY(zicfilp, PRIV_VERSION_1_12_0, ext_zicfilp), ISA_EXT_DATA_ENTRY(zicfiss, PRIV_VERSION_1_13_0, ext_zicfiss), @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(zilsd, PRIV_VERSION_1_12_0, ext_zilsd), ISA_EXT_DATA_ENTRY(zimop, PRIV_VERSION_1_13_0, ext_zimop), ISA_EXT_DATA_ENTRY(zmmul, PRIV_VERSION_1_12_0, ext_zmmul), - ISA_EXT_DATA_ENTRY(za64rs, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(za64rs, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(zaamo, PRIV_VERSION_1_12_0, ext_zaamo), ISA_EXT_DATA_ENTRY(zabha, PRIV_VERSION_1_13_0, ext_zabha), ISA_EXT_DATA_ENTRY(zacas, PRIV_VERSION_1_12_0, ext_zacas), @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(zhinx, PRIV_VERSION_1_12_0, ext_zhinx), ISA_EXT_DATA_ENTRY(zhinxmin, PRIV_VERSION_1_12_0, ext_zhinxmin), ISA_EXT_DATA_ENTRY(sdtrig, PRIV_VERSION_1_12_0, debug), - ISA_EXT_DATA_ENTRY(shcounterenw, PRIV_VERSION_1_12_0, has_priv_1_12), - ISA_EXT_DATA_ENTRY(sha, PRIV_VERSION_1_12_0, ext_sha), - ISA_EXT_DATA_ENTRY(shgatpa, PRIV_VERSION_1_12_0, has_priv_1_12), - ISA_EXT_DATA_ENTRY(shtvala, PRIV_VERSION_1_12_0, has_priv_1_12), - ISA_EXT_DATA_ENTRY(shvsatpa, PRIV_VERSION_1_12_0, has_priv_1_12), - ISA_EXT_DATA_ENTRY(shvstvala, PRIV_VERSION_1_12_0, has_priv_1_12), - ISA_EXT_DATA_ENTRY(shvstvecd, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(shcounterenw, PRIV_VERSION_1_12_0, + has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(sha, PRIV_VERSION_1_12_0, ext_sha), + ISA_INTERNAL_EXT_DATA_ENTRY(shgatpa, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(shtvala, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(shvsatpa, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(shvstvala, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(shvstvecd, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(smaia, PRIV_VERSION_1_12_0, ext_smaia), ISA_EXT_DATA_ENTRY(smcdeleg, PRIV_VERSION_1_13_0, ext_smcdeleg), ISA_EXT_DATA_ENTRY(smcntrpmf, PRIV_VERSION_1_12_0, ext_smcntrpmf), @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(smstateen, PRIV_VERSION_1_12_0, ext_smstateen), ISA_EXT_DATA_ENTRY(ssaia, PRIV_VERSION_1_12_0, ext_ssaia), ISA_EXT_DATA_ENTRY(ssccfg, PRIV_VERSION_1_13_0, ext_ssccfg), - ISA_EXT_DATA_ENTRY(ssccptr, PRIV_VERSION_1_11_0, has_priv_1_11), + ISA_INTERNAL_EXT_DATA_ENTRY(ssccptr, PRIV_VERSION_1_11_0, has_priv_1_11), ISA_EXT_DATA_ENTRY(sscofpmf, PRIV_VERSION_1_12_0, ext_sscofpmf), - ISA_EXT_DATA_ENTRY(sscounterenw, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(sscounterenw, PRIV_VERSION_1_12_0, + has_priv_1_12), ISA_EXT_DATA_ENTRY(sscsrind, PRIV_VERSION_1_12_0, ext_sscsrind), ISA_EXT_DATA_ENTRY(ssctr, PRIV_VERSION_1_12_0, ext_ssctr), ISA_EXT_DATA_ENTRY(ssdbltrp, PRIV_VERSION_1_13_0, ext_ssdbltrp), ISA_EXT_DATA_ENTRY(ssnpm, PRIV_VERSION_1_13_0, ext_ssnpm), ISA_EXT_DATA_ENTRY(sspm, PRIV_VERSION_1_13_0, ext_sspm), - ISA_EXT_DATA_ENTRY(ssstateen, PRIV_VERSION_1_12_0, ext_ssstateen), - ISA_EXT_DATA_ENTRY(ssstrict, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(ssstateen, PRIV_VERSION_1_12_0, ext_ssstateen), + ISA_INTERNAL_EXT_DATA_ENTRY(ssstrict, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(sstc, PRIV_VERSION_1_12_0, ext_sstc), - ISA_EXT_DATA_ENTRY(sstvala, PRIV_VERSION_1_12_0, has_priv_1_12), - ISA_EXT_DATA_ENTRY(sstvecd, PRIV_VERSION_1_12_0, has_priv_1_12), - ISA_EXT_DATA_ENTRY(ssu64xl, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(sstvala, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(sstvecd, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(ssu64xl, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(supm, PRIV_VERSION_1_13_0, ext_supm), ISA_EXT_DATA_ENTRY(svade, PRIV_VERSION_1_11_0, ext_svade), ISA_EXT_DATA_ENTRY(svadu, PRIV_VERSION_1_12_0, ext_svadu), @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(svnapot, PRIV_VERSION_1_12_0, ext_svnapot), ISA_EXT_DATA_ENTRY(svpbmt, PRIV_VERSION_1_12_0, ext_svpbmt), ISA_EXT_DATA_ENTRY(svrsw60t59b, PRIV_VERSION_1_13_0, ext_svrsw60t59b), - ISA_EXT_DATA_ENTRY(svukte, PRIV_VERSION_1_13_0, ext_svukte), + ISA_EXPERIMENTAL_EXT_DATA_ENTRY(svukte, PRIV_VERSION_1_13_0, ext_svukte), ISA_EXT_DATA_ENTRY(svvptc, PRIV_VERSION_1_13_0, ext_svvptc), ISA_EXT_DATA_ENTRY(xlrbr, PRIV_VERSION_1_13_0, ext_xlrbr), ISA_EXT_DATA_ENTRY(xmipscbop, PRIV_VERSION_1_12_0, ext_xmipscbop), diff --git a/target/riscv/riscv-qmp-cmds.c b/target/riscv/riscv-qmp-cmds.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/riscv-qmp-cmds.c +++ b/target/riscv/riscv-qmp-cmds.c @@ -XXX,XX +XXX,XX @@ static void riscv_obj_add_qdict_prop(Object *obj, QDict *qdict_out, } } -static void riscv_obj_add_multiext_props(Object *obj, QDict *qdict_out, - const RISCVCPUMultiExtConfig *arr) +static void riscv_obj_add_multiext_props(Object *obj, QDict *qdict_out) { - for (int i = 0; arr[i].name != NULL; i++) { - riscv_obj_add_qdict_prop(obj, qdict_out, arr[i].name); - } -} + const RISCVIsaExtData *edata; -static void riscv_obj_add_named_feats_qdict(Object *obj, QDict *qdict_out) -{ - const RISCVCPUMultiExtConfig *named_cfg; - RISCVCPU *cpu = RISCV_CPU(obj); - QObject *value; - bool flag_val; - - for (int i = 0; riscv_cpu_named_features[i].name != NULL; i++) { - named_cfg = &riscv_cpu_named_features[i]; - flag_val = isa_ext_is_enabled(cpu, named_cfg->offset); - value = QOBJECT(qbool_from_bool(flag_val)); - - qdict_put_obj(qdict_out, named_cfg->name, value); + for (edata = isa_edata_arr; edata && edata->name; edata++) { + if (edata->prop_name) { + riscv_obj_add_qdict_prop(obj, qdict_out, edata->prop_name); + } } } @@ -XXX,XX +XXX,XX @@ CpuModelExpansionInfo *qmp_query_cpu_model_expansion(CpuModelExpansionType type, qdict_out = qdict_new(); - riscv_obj_add_multiext_props(obj, qdict_out, riscv_cpu_extensions); - riscv_obj_add_multiext_props(obj, qdict_out, riscv_cpu_experimental_exts); - riscv_obj_add_multiext_props(obj, qdict_out, riscv_cpu_vendor_exts); - riscv_obj_add_named_feats_qdict(obj, qdict_out); + riscv_obj_add_multiext_props(obj, qdict_out); riscv_obj_add_profiles_qdict(obj, qdict_out); /* Add our CPU boolean options too */ -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Commit 7e4f75cadf ("target/riscv/tcg: hide warn for named feats when disabling via priv_ver") changed the design of disable_priv_spec_isa_exts to not warn when disabling what we were calling "named features" at that time. Back in that time we were adding RVA22 profile support and we were dealing with a RVI innovation: named features. These can be define as cute names for pre-existing behavior/parameters, e.g. 'zic64b' means all cache blocks must have 64 bytes. They do get inserted in the riscv,isa but they are not "real" extensions because users shouldn't be setting them in the command line, or so we thought back then, and we attempted to model that by calling it "named features". This didn't age that well: ziccrse is a so called named feature as far as TCG goes, but then KVM had to treat it as a regular extension that can be user set and we made an exception: ziccrse is a named feature that is user set by KVM. "Named features" are regular extensions that might or might not be user set, and might or might not warrant special handling during realize() by setting other parameters. And we'll being treating them as such, which will culminate in the end of riscv_cpu_named_features[] array in the end. This reverts commit 7e4f75cadf44ee67809c7ca82645a289a5268966. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-5-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 13 +++---------- 1 file changed, 3 insertions(+), 10 deletions(-) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_disable_priv_spec_isa_exts(RISCVCPU *cpu) } isa_ext_update_enabled(cpu, edata->ext_enable_offset, false); - - /* - * Do not show user warnings for named features that users - * can't enable/disable in the command line. See commit - * 68c9e54bea for more info. - */ - if (cpu_cfg_offset_is_named_feat(edata->ext_enable_offset)) { - continue; - } #ifndef CONFIG_USER_ONLY warn_report("disabling %s extension for hart 0x%" PRIx64 " because privilege spec version does not match", @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_update_named_features(RISCVCPU *cpu) cpu->cfg.has_priv_1_13 = true; } + /* zic64b is 1.12 or later */ cpu->cfg.ext_zic64b = cpu->cfg.cbom_blocksize == 64 && cpu->cfg.cbop_blocksize == 64 && - cpu->cfg.cboz_blocksize == 64; + cpu->cfg.cboz_blocksize == 64 && + cpu->cfg.has_priv_1_12; cpu->cfg.ext_ssstateen = cpu->cfg.ext_smstateen; -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> We're using both isa_edata_arr[] and riscv_cpu_named_features[] to find an extension name based on a cfg offset. This is reminiscent of a past where isa_edata_arr[] didn't include entries for internal extensions. At this point we can use just isa_edata_arr[]. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-6-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static int cpu_cfg_ext_get_min_version(uint32_t ext_offset) static const char *cpu_cfg_ext_get_name(uint32_t ext_offset) { - const RISCVCPUMultiExtConfig *feat; const RISCVIsaExtData *edata; for (edata = isa_edata_arr; edata->name != NULL; edata++) { @@ -XXX,XX +XXX,XX @@ static const char *cpu_cfg_ext_get_name(uint32_t ext_offset) } } - for (feat = riscv_cpu_named_features; feat->name != NULL; feat++) { - if (feat->offset == ext_offset) { - return feat->name; - } - } - g_assert_not_reached(); } -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Deprecate riscv_cpu_enable_named_feat() by creating implied rules for 'sha' and 'ssstateen'. 'zic64' is always true given that our default block size is set to 64. With this change we homogeneize extension handling when enabling profiles. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-7-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 25 ++++++++++++++++++++++-- target/riscv/tcg/tcg-cpu.c | 40 -------------------------------------- 2 files changed, 23 insertions(+), 42 deletions(-) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static RISCVCPUImpliedExtsRule ZVKSG_IMPLIED = { }, }; +static RISCVCPUImpliedExtsRule SHA_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_sha), + .implied_misa_exts = RVH, + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_smstateen), + CPU_CFG_OFFSET(ext_ssstateen), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + static RISCVCPUImpliedExtsRule SSCFG_IMPLIED = { .ext = CPU_CFG_OFFSET(ext_ssccfg), .implied_multi_exts = { @@ -XXX,XX +XXX,XX @@ static RISCVCPUImpliedExtsRule SSCTR_IMPLIED = { }, }; +static RISCVCPUImpliedExtsRule SSSTATEEN_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_ssstateen), + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_smstateen), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + static RISCVCPUImpliedExtsRule ZVFBFA_IMPLIED = { .ext = CPU_CFG_OFFSET(ext_zvfbfa), .implied_multi_exts = { @@ -XXX,XX +XXX,XX @@ RISCVCPUImpliedExtsRule *riscv_multi_ext_implied_rules[] = { &ZVFBFA_IMPLIED, &ZVFBFMIN_IMPLIED, &ZVFBFWMA_IMPLIED, &ZVFH_IMPLIED, &ZVFHMIN_IMPLIED, &ZVKN_IMPLIED, &ZVKNC_IMPLIED, &ZVKNG_IMPLIED, &ZVKNHB_IMPLIED, - &ZVKS_IMPLIED, &ZVKSC_IMPLIED, &ZVKSG_IMPLIED, &SSCFG_IMPLIED, - &SUPM_IMPLIED, &SSPM_IMPLIED, &SMCTR_IMPLIED, &SSCTR_IMPLIED, + &ZVKS_IMPLIED, &ZVKSC_IMPLIED, &ZVKSG_IMPLIED, &SHA_IMPLIED, + &SSCFG_IMPLIED, &SUPM_IMPLIED, &SSPM_IMPLIED, &SMCTR_IMPLIED, + &SSCTR_IMPLIED, &SSSTATEEN_IMPLIED, NULL }; diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static const char *cpu_cfg_ext_get_name(uint32_t ext_offset) g_assert_not_reached(); } -static bool cpu_cfg_offset_is_named_feat(uint32_t ext_offset) -{ - const RISCVCPUMultiExtConfig *feat; - - for (feat = riscv_cpu_named_features; feat->name != NULL; feat++) { - if (feat->offset == ext_offset) { - return true; - } - } - - return false; -} - -static void riscv_cpu_enable_named_feat(RISCVCPU *cpu, uint32_t feat_offset) -{ - /* - * All other named features are already enabled - * in riscv_tcg_cpu_instance_init(). - */ - switch (feat_offset) { - case CPU_CFG_OFFSET(ext_zic64b): - cpu->cfg.cbom_blocksize = 64; - cpu->cfg.cbop_blocksize = 64; - cpu->cfg.cboz_blocksize = 64; - break; - case CPU_CFG_OFFSET(ext_sha): - if (!cpu_misa_ext_is_user_set(RVH)) { - riscv_cpu_write_misa_bit(cpu, RVH, true); - } - /* fallthrough */ - case CPU_CFG_OFFSET(ext_ssstateen): - cpu->cfg.ext_smstateen = true; - break; - } -} - static void cpu_bump_multi_ext_priv_ver(CPURISCVState *env, uint32_t ext_offset) { @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_set_profile(RISCVCPU *cpu, ext_offset = profile->ext_offsets[i]; if (profile->enabled) { - if (cpu_cfg_offset_is_named_feat(ext_offset)) { - riscv_cpu_enable_named_feat(cpu, ext_offset); - } - cpu_bump_multi_ext_priv_ver(&cpu->env, ext_offset); } -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> This array has no uses left. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-8-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 1 - target/riscv/cpu.c | 26 -------------------------- target/riscv/tcg/tcg-cpu.c | 4 ++-- 3 files changed, 2 insertions(+), 29 deletions(-) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct RISCVCPUMultiExtConfig { extern const RISCVCPUMultiExtConfig riscv_cpu_extensions[]; extern const RISCVCPUMultiExtConfig riscv_cpu_vendor_exts[]; extern const RISCVCPUMultiExtConfig riscv_cpu_experimental_exts[]; -extern const RISCVCPUMultiExtConfig riscv_cpu_named_features[]; typedef struct isa_ext_data { const char *name; diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const RISCVCPUMultiExtConfig riscv_cpu_experimental_exts[] = { { }, }; -/* - * 'Named features' is the name we give to extensions that we - * don't want to expose to users. They are either immutable - * (always enabled/disable) or they'll vary depending on - * the resulting CPU state. - * - * Some of them are always enabled depending on priv version - * of the CPU and are declared directly in isa_edata_arr[]. - * The ones listed here have special checks during finalize() - * time and require their own flags like regular extensions. - * See riscv_cpu_update_named_features() for more info. - */ -const RISCVCPUMultiExtConfig riscv_cpu_named_features[] = { - MULTI_EXT_CFG_BOOL("zic64b", ext_zic64b, true), - MULTI_EXT_CFG_BOOL("ssstateen", ext_ssstateen, true), - MULTI_EXT_CFG_BOOL("sha", ext_sha, true), - - /* - * 'ziccrse' has its own flag because the KVM driver - * wants to enable/disable it on its own accord. - */ - MULTI_EXT_CFG_BOOL("ziccrse", ext_ziccrse, true), - - { }, -}; - static void cpu_set_prop_err(RISCVCPU *cpu, const char *propname, Error **errp) { diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_disable_priv_spec_isa_exts(RISCVCPU *cpu) } } -static void riscv_cpu_update_named_features(RISCVCPU *cpu) +static void riscv_cpu_update_cfg(RISCVCPU *cpu) { if (cpu->env.priv_ver >= PRIV_VERSION_1_11_0) { cpu->cfg.has_priv_1_11 = true; @@ -XXX,XX +XXX,XX @@ void riscv_tcg_cpu_finalize_features(RISCVCPU *cpu, Error **errp) return; } - riscv_cpu_update_named_features(cpu); + riscv_cpu_update_cfg(cpu); riscv_cpu_validate_profiles(cpu); if (cpu->cfg.ext_smepmp && !cpu->cfg.pmp) { -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> The non-standard extensions, in this particular function the vendor extensions, are all riscv,isa names that starts with 'x'. In theory this is a bit slower than using riscv_cpu_vendor_exts (isa_edata_arr is longer) but riscv_cpu_update_misa_x() is executed only once during finalize(), i.e. not a hot path. We're accepting a tiny performance hit as as a tradeoff for the code simplication we'll have later by removing all riscv_cpu_* arrays. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-9-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_update_misa_c(RISCVCPU *cpu) static void riscv_cpu_update_misa_x(RISCVCPU *cpu) { CPURISCVState *env = &cpu->env; - const RISCVCPUMultiExtConfig *arr = riscv_cpu_vendor_exts; + const RISCVIsaExtData *edata; - for (int i = 0; arr[i].name != NULL; i++) { - if (isa_ext_is_enabled(cpu, arr[i].offset)) { + for (edata = isa_edata_arr; edata && edata->name; edata++) { + if (edata->name[0] == 'x' + && isa_ext_is_enabled(cpu, edata->ext_enable_offset)) { riscv_cpu_set_misa_ext(env, env->misa_ext | RVX); break; } -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Use isa_edata_arr[] directly instead of going through 3 different arrays to populate the unavailable KVM properties. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-10-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/kvm/kvm-cpu.c | 25 ++++++++++--------------- 1 file changed, 10 insertions(+), 15 deletions(-) diff --git a/target/riscv/kvm/kvm-cpu.c b/target/riscv/kvm/kvm-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/kvm/kvm-cpu.c +++ b/target/riscv/kvm/kvm-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_add_kvm_unavail_prop(Object *obj, const char *prop_name) NULL, (void *)prop_name); } -static void riscv_cpu_add_kvm_unavail_prop_array(Object *obj, - const RISCVCPUMultiExtConfig *array) -{ - const RISCVCPUMultiExtConfig *prop; - - g_assert(array); - - for (prop = array; prop && prop->name; prop++) { - riscv_cpu_add_kvm_unavail_prop(obj, prop->name); - } -} - static void kvm_riscv_add_cpu_user_properties(Object *cpu_obj) { + const RISCVIsaExtData *edata; int i; riscv_add_satp_mode_properties(cpu_obj); @@ -XXX,XX +XXX,XX @@ static void kvm_riscv_add_cpu_user_properties(Object *cpu_obj) NULL, multi_cfg); } - riscv_cpu_add_kvm_unavail_prop_array(cpu_obj, riscv_cpu_extensions); - riscv_cpu_add_kvm_unavail_prop_array(cpu_obj, riscv_cpu_vendor_exts); - riscv_cpu_add_kvm_unavail_prop_array(cpu_obj, riscv_cpu_experimental_exts); + /* + * Mark all isa_edata_arr properties that collides with + * a KVM property as unavailable. + */ + for (edata = isa_edata_arr; edata && edata->name; edata++) { + if (edata->prop_name) { + riscv_cpu_add_kvm_unavail_prop(cpu_obj, edata->prop_name); + } + } /* We don't have the needed KVM support for profiles */ for (i = 0; riscv_profiles[i] != NULL; i++) { -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Use isa_edata_arr[] to enable all feasible extensions. Filter experimental and vendor extensions by checking if the riscv,isa or the prop name starts with 'x'. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-11-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_init_max_cpu_extensions(Object *obj) { RISCVCPU *cpu = RISCV_CPU(obj); CPURISCVState *env = &cpu->env; - const RISCVCPUMultiExtConfig *prop; + const RISCVIsaExtData *edata; /* Enable RVG and RVV that are disabled by default */ riscv_cpu_set_misa_ext(env, env->misa_ext | RVB | RVG | RVV); - for (prop = riscv_cpu_extensions; prop && prop->name; prop++) { - isa_ext_update_enabled(cpu, prop->offset, true); + for (edata = isa_edata_arr; edata && edata->name; edata++) { + if (edata->name[0] == 'x' + || (edata->prop_name && edata->prop_name[0] == 'x')) { + continue; + } + + isa_ext_update_enabled(cpu, edata->ext_enable_offset, true); } /* -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> The cpu_get_multi_ext_cfg/cpu_set_multi_ext_cfg callbacks are using a RISCVCPUMultiExtConfig pointer as opaque, but internally we're just using multi_ext_cfg->offset. Use multi_ext_cfg->offset as opaque instead. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-12-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_add_profiles(Object *cpu_obj) static void cpu_set_multi_ext_cfg(Object *obj, Visitor *v, const char *name, void *opaque, Error **errp) { - const RISCVCPUMultiExtConfig *multi_ext_cfg = opaque; RISCVCPU *cpu = RISCV_CPU(obj); + uint32_t cfg_offset = *(uint32_t *)opaque; bool vendor_cpu = riscv_cpu_is_vendor(obj); bool prev_val, value; @@ -XXX,XX +XXX,XX @@ static void cpu_set_multi_ext_cfg(Object *obj, Visitor *v, const char *name, return; } - cpu_cfg_ext_add_user_opt(multi_ext_cfg->offset, value); + cpu_cfg_ext_add_user_opt(cfg_offset, value); - prev_val = isa_ext_is_enabled(cpu, multi_ext_cfg->offset); + prev_val = isa_ext_is_enabled(cpu, cfg_offset); if (value == prev_val) { return; @@ -XXX,XX +XXX,XX @@ static void cpu_set_multi_ext_cfg(Object *obj, Visitor *v, const char *name, } if (value) { - cpu_bump_multi_ext_priv_ver(&cpu->env, multi_ext_cfg->offset); + cpu_bump_multi_ext_priv_ver(&cpu->env, cfg_offset); } - isa_ext_update_enabled(cpu, multi_ext_cfg->offset, value); + isa_ext_update_enabled(cpu, cfg_offset, value); } static void cpu_get_multi_ext_cfg(Object *obj, Visitor *v, const char *name, void *opaque, Error **errp) { - const RISCVCPUMultiExtConfig *multi_ext_cfg = opaque; - bool value = isa_ext_is_enabled(RISCV_CPU(obj), multi_ext_cfg->offset); + uint32_t cfg_offset = *(uint32_t *)opaque; + bool value = isa_ext_is_enabled(RISCV_CPU(obj), cfg_offset); visit_type_bool(v, name, &value, errp); } @@ -XXX,XX +XXX,XX @@ static void cpu_add_multi_ext_prop(Object *cpu_obj, object_property_add(cpu_obj, multi_cfg->name, "bool", cpu_get_multi_ext_cfg, cpu_set_multi_ext_cfg, - NULL, (void *)multi_cfg); + NULL, (void *)&multi_cfg->offset); if (!generic_cpu) { return; -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Do not rely on riscv_cpu_* arrays to set rv32/rv64 CPU defaults - add them to the CPU definition like we do with all other CPUs (aside from 'max'). Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-13-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 40 ++++++++++++++++++++++++++++++++++++++ target/riscv/tcg/tcg-cpu.c | 14 ------------- 2 files changed, 40 insertions(+), 14 deletions(-) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static const TypeInfo riscv_cpu_type_infos[] = { DEFINE_RISCV_CPU(TYPE_RISCV_CPU_BASE32, TYPE_RISCV_DYNAMIC_CPU, .cfg.max_satp_mode = VM_1_10_SV32, .misa_mxl_max = MXL_RV32, + + /* Default extensions as of QEMU 11.1. */ + .cfg.ext_zicbom = true, + .cfg.ext_zicbop = true, + .cfg.ext_zicboz = true, + .cfg.ext_zicntr = true, + .cfg.ext_zicsr = true, + .cfg.ext_zifencei = true, + .cfg.ext_zihintntl = true, + .cfg.ext_zihintpause = true, + .cfg.ext_zihpm = true, + .cfg.ext_zawrs = true, + .cfg.ext_zfa = true, + .cfg.ext_zba = true, + .cfg.ext_zbb = true, + .cfg.ext_zbc = true, + .cfg.ext_zbs = true, + .cfg.ext_sstc = true, + .cfg.ext_svadu = true, + .cfg.ext_svvptc = true, ), DEFINE_RISCV_CPU(TYPE_RISCV_CPU_IBEX, TYPE_RISCV_VENDOR_CPU, @@ -XXX,XX +XXX,XX @@ static const TypeInfo riscv_cpu_type_infos[] = { DEFINE_RISCV_CPU(TYPE_RISCV_CPU_BASE64, TYPE_RISCV_DYNAMIC_CPU, .cfg.max_satp_mode = VM_1_10_SV57, .misa_mxl_max = MXL_RV64, + + /* Default extensions as of QEMU 11.1. */ + .cfg.ext_zicbom = true, + .cfg.ext_zicbop = true, + .cfg.ext_zicboz = true, + .cfg.ext_zicntr = true, + .cfg.ext_zicsr = true, + .cfg.ext_zifencei = true, + .cfg.ext_zihintntl = true, + .cfg.ext_zihintpause = true, + .cfg.ext_zihpm = true, + .cfg.ext_zawrs = true, + .cfg.ext_zfa = true, + .cfg.ext_zba = true, + .cfg.ext_zbb = true, + .cfg.ext_zbc = true, + .cfg.ext_zbs = true, + .cfg.ext_sstc = true, + .cfg.ext_svadu = true, + .cfg.ext_svvptc = true, ), DEFINE_RISCV_CPU(TYPE_RISCV_CPU_SIFIVE_E51, TYPE_RISCV_CPU_SIFIVE_E, diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void cpu_get_multi_ext_cfg(Object *obj, Visitor *v, const char *name, static void cpu_add_multi_ext_prop(Object *cpu_obj, const RISCVCPUMultiExtConfig *multi_cfg) { - bool generic_cpu = riscv_cpu_is_generic(cpu_obj); - object_property_add(cpu_obj, multi_cfg->name, "bool", cpu_get_multi_ext_cfg, cpu_set_multi_ext_cfg, NULL, (void *)&multi_cfg->offset); - - if (!generic_cpu) { - return; - } - - /* - * Set def val directly instead of using - * object_property_set_bool() to save the set() - * callback hash for user inputs. - */ - isa_ext_update_enabled(RISCV_CPU(cpu_obj), multi_cfg->offset, - multi_cfg->enabled); } static void riscv_cpu_add_multiext_prop_array(Object *obj, -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> This change has been done twice now: one in riscv-qmp-cmds, another in the KVM. We're now ready to do it for TCG. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-14-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 34 ++++++++++------------------------ 1 file changed, 10 insertions(+), 24 deletions(-) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void cpu_get_multi_ext_cfg(Object *obj, Visitor *v, const char *name, visit_type_bool(v, name, &value, errp); } -static void cpu_add_multi_ext_prop(Object *cpu_obj, - const RISCVCPUMultiExtConfig *multi_cfg) -{ - object_property_add(cpu_obj, multi_cfg->name, "bool", - cpu_get_multi_ext_cfg, - cpu_set_multi_ext_cfg, - NULL, (void *)&multi_cfg->offset); -} - -static void riscv_cpu_add_multiext_prop_array(Object *obj, - const RISCVCPUMultiExtConfig *array) -{ - const RISCVCPUMultiExtConfig *prop; - - g_assert(array); - - for (prop = array; prop && prop->name; prop++) { - cpu_add_multi_ext_prop(obj, prop); - } -} - /* * Add CPU properties with user-facing flags. * @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_add_multiext_prop_array(Object *obj, */ static void riscv_cpu_add_user_properties(Object *obj) { + const RISCVIsaExtData *edata; + #ifndef CONFIG_USER_ONLY riscv_add_satp_mode_properties(obj); #endif riscv_cpu_add_misa_properties(obj); - riscv_cpu_add_multiext_prop_array(obj, riscv_cpu_extensions); - riscv_cpu_add_multiext_prop_array(obj, riscv_cpu_vendor_exts); - riscv_cpu_add_multiext_prop_array(obj, riscv_cpu_experimental_exts); + for (edata = isa_edata_arr; edata && edata->name; edata++) { + if (edata->prop_name) { + object_property_add(obj, edata->prop_name, "bool", + cpu_get_multi_ext_cfg, + cpu_set_multi_ext_cfg, + NULL, (void *)&edata->ext_enable_offset); + } + } riscv_cpu_add_profiles(obj); } -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> There is no more uses left for these arrays. isa_edata_arr[] is doing everything we need, making our lives a little easier when adding new extensions. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-15-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 10 --- target/riscv/cpu.c | 159 --------------------------------------------- 2 files changed, 169 deletions(-) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ bool isa_ext_is_enabled(RISCVCPU *cpu, uint32_t ext_offset); void riscv_cpu_set_misa_ext(CPURISCVState *env, uint32_t ext); bool riscv_cpu_is_vendor(Object *cpu_obj); -typedef struct RISCVCPUMultiExtConfig { - const char *name; - uint32_t offset; - bool enabled; -} RISCVCPUMultiExtConfig; - -extern const RISCVCPUMultiExtConfig riscv_cpu_extensions[]; -extern const RISCVCPUMultiExtConfig riscv_cpu_vendor_exts[]; -extern const RISCVCPUMultiExtConfig riscv_cpu_experimental_exts[]; - typedef struct isa_ext_data { const char *name; const char *prop_name; diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const char *riscv_get_misa_ext_description(uint32_t bit) return val; } -#define MULTI_EXT_CFG_BOOL(_name, _prop, _defval) \ - {.name = _name, .offset = CPU_CFG_OFFSET(_prop), \ - .enabled = _defval} - -const RISCVCPUMultiExtConfig riscv_cpu_extensions[] = { - /* Defaults for standard extensions */ - MULTI_EXT_CFG_BOOL("sscofpmf", ext_sscofpmf, false), - MULTI_EXT_CFG_BOOL("smcntrpmf", ext_smcntrpmf, false), - MULTI_EXT_CFG_BOOL("smcsrind", ext_smcsrind, false), - MULTI_EXT_CFG_BOOL("smcdeleg", ext_smcdeleg, false), - MULTI_EXT_CFG_BOOL("sscsrind", ext_sscsrind, false), - MULTI_EXT_CFG_BOOL("ssccfg", ext_ssccfg, false), - MULTI_EXT_CFG_BOOL("smctr", ext_smctr, false), - MULTI_EXT_CFG_BOOL("ssctr", ext_ssctr, false), - MULTI_EXT_CFG_BOOL("zifencei", ext_zifencei, true), - MULTI_EXT_CFG_BOOL("zicfilp", ext_zicfilp, false), - MULTI_EXT_CFG_BOOL("zicfiss", ext_zicfiss, false), - MULTI_EXT_CFG_BOOL("zicsr", ext_zicsr, true), - MULTI_EXT_CFG_BOOL("zihintntl", ext_zihintntl, true), - MULTI_EXT_CFG_BOOL("zihintpause", ext_zihintpause, true), - MULTI_EXT_CFG_BOOL("zimop", ext_zimop, false), - MULTI_EXT_CFG_BOOL("zcmop", ext_zcmop, false), - MULTI_EXT_CFG_BOOL("zacas", ext_zacas, false), - MULTI_EXT_CFG_BOOL("zama16b", ext_zama16b, false), - MULTI_EXT_CFG_BOOL("zabha", ext_zabha, false), - MULTI_EXT_CFG_BOOL("zaamo", ext_zaamo, false), - MULTI_EXT_CFG_BOOL("zalasr", ext_zalasr, false), - MULTI_EXT_CFG_BOOL("zalrsc", ext_zalrsc, false), - MULTI_EXT_CFG_BOOL("zawrs", ext_zawrs, true), - MULTI_EXT_CFG_BOOL("zfa", ext_zfa, true), - MULTI_EXT_CFG_BOOL("zfbfmin", ext_zfbfmin, false), - MULTI_EXT_CFG_BOOL("zfh", ext_zfh, false), - MULTI_EXT_CFG_BOOL("zfhmin", ext_zfhmin, false), - MULTI_EXT_CFG_BOOL("zve32f", ext_zve32f, false), - MULTI_EXT_CFG_BOOL("zve32x", ext_zve32x, false), - MULTI_EXT_CFG_BOOL("zve64f", ext_zve64f, false), - MULTI_EXT_CFG_BOOL("zve64d", ext_zve64d, false), - MULTI_EXT_CFG_BOOL("zve64x", ext_zve64x, false), - MULTI_EXT_CFG_BOOL("zvfbfa", ext_zvfbfa, false), - MULTI_EXT_CFG_BOOL("zvfbfmin", ext_zvfbfmin, false), - MULTI_EXT_CFG_BOOL("zvfbfwma", ext_zvfbfwma, false), - MULTI_EXT_CFG_BOOL("zvfh", ext_zvfh, false), - MULTI_EXT_CFG_BOOL("zvfhmin", ext_zvfhmin, false), - MULTI_EXT_CFG_BOOL("sstc", ext_sstc, true), - MULTI_EXT_CFG_BOOL("ssnpm", ext_ssnpm, false), - MULTI_EXT_CFG_BOOL("sspm", ext_sspm, false), - MULTI_EXT_CFG_BOOL("supm", ext_supm, false), - - MULTI_EXT_CFG_BOOL("smaia", ext_smaia, false), - MULTI_EXT_CFG_BOOL("smdbltrp", ext_smdbltrp, false), - MULTI_EXT_CFG_BOOL("smepmp", ext_smepmp, false), - MULTI_EXT_CFG_BOOL("smpmpmt", ext_smpmpmt, false), - MULTI_EXT_CFG_BOOL("smrnmi", ext_smrnmi, false), - MULTI_EXT_CFG_BOOL("smmpm", ext_smmpm, false), - MULTI_EXT_CFG_BOOL("smnpm", ext_smnpm, false), - MULTI_EXT_CFG_BOOL("smstateen", ext_smstateen, false), - MULTI_EXT_CFG_BOOL("ssaia", ext_ssaia, false), - MULTI_EXT_CFG_BOOL("ssdbltrp", ext_ssdbltrp, false), - MULTI_EXT_CFG_BOOL("svade", ext_svade, false), - MULTI_EXT_CFG_BOOL("svadu", ext_svadu, true), - MULTI_EXT_CFG_BOOL("svinval", ext_svinval, false), - MULTI_EXT_CFG_BOOL("svnapot", ext_svnapot, false), - MULTI_EXT_CFG_BOOL("svpbmt", ext_svpbmt, false), - MULTI_EXT_CFG_BOOL("svrsw60t59b", ext_svrsw60t59b, false), - MULTI_EXT_CFG_BOOL("svvptc", ext_svvptc, true), - - MULTI_EXT_CFG_BOOL("zicntr", ext_zicntr, true), - MULTI_EXT_CFG_BOOL("zihpm", ext_zihpm, true), - MULTI_EXT_CFG_BOOL("zilsd", ext_zilsd, false), - - MULTI_EXT_CFG_BOOL("zba", ext_zba, true), - MULTI_EXT_CFG_BOOL("zbb", ext_zbb, true), - MULTI_EXT_CFG_BOOL("zbc", ext_zbc, true), - MULTI_EXT_CFG_BOOL("zbkb", ext_zbkb, false), - MULTI_EXT_CFG_BOOL("zbkc", ext_zbkc, false), - MULTI_EXT_CFG_BOOL("zbkx", ext_zbkx, false), - MULTI_EXT_CFG_BOOL("zbs", ext_zbs, true), - MULTI_EXT_CFG_BOOL("zk", ext_zk, false), - MULTI_EXT_CFG_BOOL("zkn", ext_zkn, false), - MULTI_EXT_CFG_BOOL("zknd", ext_zknd, false), - MULTI_EXT_CFG_BOOL("zkne", ext_zkne, false), - MULTI_EXT_CFG_BOOL("zknh", ext_zknh, false), - MULTI_EXT_CFG_BOOL("zkr", ext_zkr, false), - MULTI_EXT_CFG_BOOL("zks", ext_zks, false), - MULTI_EXT_CFG_BOOL("zksed", ext_zksed, false), - MULTI_EXT_CFG_BOOL("zksh", ext_zksh, false), - MULTI_EXT_CFG_BOOL("zkt", ext_zkt, false), - MULTI_EXT_CFG_BOOL("ztso", ext_ztso, false), - - MULTI_EXT_CFG_BOOL("zdinx", ext_zdinx, false), - MULTI_EXT_CFG_BOOL("zfinx", ext_zfinx, false), - MULTI_EXT_CFG_BOOL("zhinx", ext_zhinx, false), - MULTI_EXT_CFG_BOOL("zhinxmin", ext_zhinxmin, false), - - MULTI_EXT_CFG_BOOL("zicbom", ext_zicbom, true), - MULTI_EXT_CFG_BOOL("zicbop", ext_zicbop, true), - MULTI_EXT_CFG_BOOL("zicboz", ext_zicboz, true), - - MULTI_EXT_CFG_BOOL("zmmul", ext_zmmul, false), - - MULTI_EXT_CFG_BOOL("zca", ext_zca, false), - MULTI_EXT_CFG_BOOL("zcb", ext_zcb, false), - MULTI_EXT_CFG_BOOL("zcd", ext_zcd, false), - MULTI_EXT_CFG_BOOL("zce", ext_zce, false), - MULTI_EXT_CFG_BOOL("zcf", ext_zcf, false), - MULTI_EXT_CFG_BOOL("zcmp", ext_zcmp, false), - MULTI_EXT_CFG_BOOL("zcmt", ext_zcmt, false), - MULTI_EXT_CFG_BOOL("zicond", ext_zicond, false), - MULTI_EXT_CFG_BOOL("zclsd", ext_zclsd, false), - - /* Vector cryptography extensions */ - MULTI_EXT_CFG_BOOL("zvbb", ext_zvbb, false), - MULTI_EXT_CFG_BOOL("zvbc", ext_zvbc, false), - MULTI_EXT_CFG_BOOL("zvkb", ext_zvkb, false), - MULTI_EXT_CFG_BOOL("zvkg", ext_zvkg, false), - MULTI_EXT_CFG_BOOL("zvkned", ext_zvkned, false), - MULTI_EXT_CFG_BOOL("zvknha", ext_zvknha, false), - MULTI_EXT_CFG_BOOL("zvknhb", ext_zvknhb, false), - MULTI_EXT_CFG_BOOL("zvksed", ext_zvksed, false), - MULTI_EXT_CFG_BOOL("zvksh", ext_zvksh, false), - MULTI_EXT_CFG_BOOL("zvkt", ext_zvkt, false), - MULTI_EXT_CFG_BOOL("zvkn", ext_zvkn, false), - MULTI_EXT_CFG_BOOL("zvknc", ext_zvknc, false), - MULTI_EXT_CFG_BOOL("zvkng", ext_zvkng, false), - MULTI_EXT_CFG_BOOL("zvks", ext_zvks, false), - MULTI_EXT_CFG_BOOL("zvksc", ext_zvksc, false), - MULTI_EXT_CFG_BOOL("zvksg", ext_zvksg, false), - - { }, -}; - -const RISCVCPUMultiExtConfig riscv_cpu_vendor_exts[] = { - MULTI_EXT_CFG_BOOL("xtheadba", ext_xtheadba, false), - MULTI_EXT_CFG_BOOL("xtheadbb", ext_xtheadbb, false), - MULTI_EXT_CFG_BOOL("xtheadbs", ext_xtheadbs, false), - MULTI_EXT_CFG_BOOL("xtheadcmo", ext_xtheadcmo, false), - MULTI_EXT_CFG_BOOL("xtheadcondmov", ext_xtheadcondmov, false), - MULTI_EXT_CFG_BOOL("xtheadfmemidx", ext_xtheadfmemidx, false), - MULTI_EXT_CFG_BOOL("xtheadfmv", ext_xtheadfmv, false), - MULTI_EXT_CFG_BOOL("xtheadmac", ext_xtheadmac, false), - MULTI_EXT_CFG_BOOL("xtheadmemidx", ext_xtheadmemidx, false), - MULTI_EXT_CFG_BOOL("xtheadmempair", ext_xtheadmempair, false), - MULTI_EXT_CFG_BOOL("xtheadsync", ext_xtheadsync, false), - MULTI_EXT_CFG_BOOL("xventanacondops", ext_XVentanaCondOps, false), - MULTI_EXT_CFG_BOOL("xmipscbop", ext_xmipscbop, false), - MULTI_EXT_CFG_BOOL("xmipscmov", ext_xmipscmov, false), - MULTI_EXT_CFG_BOOL("xmipslsp", ext_xmipslsp, false), - MULTI_EXT_CFG_BOOL("xlrbr", ext_xlrbr, false), - - { }, -}; - -/* These are experimental so mark with 'x-' */ -const RISCVCPUMultiExtConfig riscv_cpu_experimental_exts[] = { - MULTI_EXT_CFG_BOOL("x-svukte", ext_svukte, false), - - { }, -}; - static void cpu_set_prop_err(RISCVCPU *cpu, const char *propname, Error **errp) { -- 2.53.0 From: Fangyu Yu <fangyu.yu@linux.alibaba.com> Fix IOCOUNTINH.CY toggle detection by comparing normalized CY bit rather than XORing whole register with boolean. Fixes: 2cf2a6c027ba ("hw/riscv/riscv-iommu: add IOCOUNTINH mmio writes") Signed-off-by: Fangyu Yu <fangyu.yu@linux.alibaba.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Nutty Liu <nutty.liu@hotmail.com> Message-ID: <20260509074941.99295-1-fangyu.yu@linux.alibaba.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu-hpm.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/riscv/riscv-iommu-hpm.c b/hw/riscv/riscv-iommu-hpm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu-hpm.c +++ b/hw/riscv/riscv-iommu-hpm.c @@ -XXX,XX +XXX,XX @@ void riscv_iommu_process_iocntinh_cy(RISCVIOMMUState *s, bool prev_cy_inh) s, RISCV_IOMMU_REG_IOCOUNTINH); /* We only need to process CY bit toggle. */ - if (!(inhibit ^ prev_cy_inh)) { + bool cy_inh = !!(inhibit & RISCV_IOMMU_IOCOUNTINH_CY); + if (cy_inh == prev_cy_inh) { return; } -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> The priv spec defines, for RV64, that the upper 10 bits of pmpaddr0-pmpaddr63 are WARL and are supposed to be cleared. After this patch, using the bug reproducer in [1], writing ffffffffffffffff in pmpaddr0 and reading it back now results in 003fffffffffffff. Here's the 'diff -cp' dump before and after this change: *************** IN: *** 5272,5278 **** pmpcfg10 0000000000000000 pmpcfg12 0000000000000000 pmpcfg14 0000000000000000 ! pmpaddr0 ffffffffffffffff pmpaddr1 0000000000000000 pmpaddr2 0000000000000000 pmpaddr3 0000000000000000 Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260514123342.2139464-1-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException read_pmpaddr(CPURISCVState *env, int csrno, target_ulong *val) { *val = pmpaddr_csr_read(env, csrno - CSR_PMPADDR0); + + /* + * For RV64, bits 54-63 of the address registers + * PMPAADDR(0-63) is a WARL zero field (priv spec, + * section "Physical Memory Protection CSRs"). + * + * We'll have to add an annoying TARGET_RISCV64 gate + * here to avoid complaints about masking bits 0-53 + * of a potential 32 bit target_ulong '*var'. + */ +#ifdef TARGET_RISCV64 + if (env->misa_mxl == MXL_RV64 + && csrno >= CSR_PMPADDR0 && csrno <= CSR_PMPADDR63) { + target_ulong read_mask = MAKE_64BIT_MASK(0, 54); + *val &= read_mask; + } +#endif return RISCV_EXCP_NONE; } -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> In build_rimt(), the calculation of `num_ids` for the ID mapping array incorrectly uses the same formula (`0xffff - s->pci_iommu_bdf`) for both System IOMMU and PCI IOMMU topologies. For a System IOMMU, `s->pci_iommu_bdf` is 0. This results in a `num_ids` value of 0xffff. Since the source ID base starts at 0, the mapping only covers Requester IDs from 0 to 0xfffe. The final valid PCI Requester ID (0xffff) is erroneously omitted from the RIMT table. Fix this by decoupling the `num_ids` calculation. For System IOMMUs, explicitly set `num_ids` to 0x10000 to cover the entire PCI Requester ID space. This issue was discovered and reported by SpecHunter, an AI-driven architecture specification analysis tool. Link: https://github.com/yizishun/rv-isa-sec/blob/c78dacf66c8acd677b3538c837fde310bb71a97b/output/riscv-server-platform/pr-102/qemu.txt#L32 Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512062310.348208-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt-acpi-build.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/riscv/virt-acpi-build.c b/hw/riscv/virt-acpi-build.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt-acpi-build.c +++ b/hw/riscv/virt-acpi-build.c @@ -XXX,XX +XXX,XX @@ static void build_rimt(GArray *table_data, BIOSLinker *linker, range = &g_array_index(iommu_idmaps, AcpiRimtIdMapping, i); if (virt_is_iommu_sys_enabled(s)) { range->source_id_base = 0; + range->num_ids = 0x10000; } else { range->source_id_base = s->pci_iommu_bdf + 1; + range->num_ids = 0xffff - s->pci_iommu_bdf; } - range->num_ids = 0xffff - s->pci_iommu_bdf; build_rimt_id_mapping(table_data, range->source_id_base, range->num_ids, iommu_offset); } -- 2.53.0 From: Portia Stephens <portias@oss.tenstorrent.com> The counter value was not being bitshifted for a hpmcounterh read resulting in hpmcounterh returning the bottom 32-bits. Fixes: cfc96df65e01 ("target/riscv: Remove upper_half from riscv_pmu_ctr_get_fixed_counters_val") Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3498 Cc: qemu-stable@nongnu.org Signed-off-by: Portia Stephens <portias@oss.tenstorrent.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260519043352.3685866-1-stephensportia@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ RISCVException riscv_pmu_read_ctr(CPURISCVState *env, target_ulong *val, */ if (riscv_pmu_ctr_monitor_cycles(env, ctr_idx) || riscv_pmu_ctr_monitor_instructions(env, ctr_idx)) { - *val = riscv_pmu_ctr_get_fixed_counters_val(env, ctr_idx) - - ctr_prev + ctr_val; + uint64_t cntr = riscv_pmu_ctr_get_fixed_counters_val(env, ctr_idx) - + ctr_prev + ctr_val; + *val = extract64(cntr, start, length); } else { *val = ctr_val; } -- 2.53.0 From: Jim Shu <jim.shu@sifive.com> According to the AIA spec ch4.7 ("Precise effects on interrupt-pending bits"), pending bit of APLIC should be set/cleared whenever the rectified input value is high/low in the both level-trigger mode and direct delivery mode. Currently, QEMU APLIC only clears the pending bit when interrupt is claimed in APLIC, but not clears it when the rectified input value is low. (e.g. IRQ source signal is low in the LEVEL_HIGH/Level1 mode). The software may receive an additional IRQ if the peripheral triggers one after the software clears the APLIC IRQ but before it clears the peripheral's IRQ. Thus, we also clear the pending bit via the rectified input value in the level-trigger mode. This change doesn't affect MSI delivery mode. Calling riscv_aplic_msi_irq_update() when IRQ pending is low will do nothing. Signed-off-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Chao Liu <chao.liu.zevorn@gmail.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260428160103.3551125-2-jim.shu@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/intc/riscv_aplic.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/hw/intc/riscv_aplic.c b/hw/intc/riscv_aplic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/riscv_aplic.c +++ b/hw/intc/riscv_aplic.c @@ -XXX,XX +XXX,XX @@ static void riscv_aplic_request(void *opaque, int irq, int level) } break; case APLIC_SOURCECFG_SM_LEVEL_HIGH: - if ((level > 0) && !(state & APLIC_ISTATE_PENDING)) { - riscv_aplic_set_pending_raw(aplic, irq, true); + if ((level > 0) != !!(state & APLIC_ISTATE_PENDING)) { + riscv_aplic_set_pending_raw(aplic, irq, level > 0); update = true; } break; case APLIC_SOURCECFG_SM_LEVEL_LOW: - if ((level <= 0) && !(state & APLIC_ISTATE_PENDING)) { - riscv_aplic_set_pending_raw(aplic, irq, true); + if ((level <= 0) != !!(state & APLIC_ISTATE_PENDING)) { + riscv_aplic_set_pending_raw(aplic, irq, level <= 0); update = true; } break; -- 2.53.0 From: Jim Shu <jim.shu@sifive.com> Clearing APLIC registers and qemu_irq in the reset function Signed-off-by: Jim Shu <jim.shu@sifive.com> Signed-off-by: Fea.Wang <fea.wang@sifive.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260428160103.3551125-3-jim.shu@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/intc/riscv_aplic.c | 45 ++++++++++++++++++++++++++++++++++++++----- 1 file changed, 40 insertions(+), 5 deletions(-) diff --git a/hw/intc/riscv_aplic.c b/hw/intc/riscv_aplic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/riscv_aplic.c +++ b/hw/intc/riscv_aplic.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps riscv_aplic_ops = { } }; +static void riscv_aplic_reset_enter(Object *obj, ResetType type) +{ + RISCVAPLICState *aplic = RISCV_APLIC(obj); + int i; + + aplic->domaincfg = 0; + memset(aplic->sourcecfg, 0, sizeof(uint32_t) * aplic->num_irqs); + memset(aplic->target, 0, sizeof(uint32_t) * aplic->num_irqs); + if (!aplic->msimode) { + for (i = 0; i < aplic->num_irqs; i++) { + aplic->target[i] = 1; + } + } + + for (i = 0; i < aplic->num_irqs ; i++) { + riscv_aplic_set_enabled_raw(aplic, i, false); + } + + /* Need to unlock [ms]msicfgaddrh.L */ + aplic->mmsicfgaddr = 0; + aplic->mmsicfgaddrH = 0; + aplic->smsicfgaddr = 0; + aplic->smsicfgaddrH = 0; + + if (!aplic->msimode) { + /* Reset IDC registers only in non-MSI mode */ + for (i = 0; i < aplic->num_harts; i++) { + aplic->idelivery[i] = 0; + aplic->iforce[i] = 0; + aplic->ithreshold[i] = 0; + } + + for (i = 0; i < aplic->num_harts; i++) { + qemu_irq_lower(aplic->external_irqs[i]); + } + } +} + static void riscv_aplic_realize(DeviceState *dev, Error **errp) { uint32_t i; @@ -XXX,XX +XXX,XX @@ static void riscv_aplic_realize(DeviceState *dev, Error **errp) aplic->sourcecfg = g_new0(uint32_t, aplic->num_irqs); aplic->state = g_new0(uint32_t, aplic->num_irqs); aplic->target = g_new0(uint32_t, aplic->num_irqs); - if (!aplic->msimode) { - for (i = 0; i < aplic->num_irqs; i++) { - aplic->target[i] = 1; - } - } aplic->idelivery = g_new0(uint32_t, aplic->num_harts); aplic->iforce = g_new0(uint32_t, aplic->num_harts); aplic->ithreshold = g_new0(uint32_t, aplic->num_harts); @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_riscv_aplic = { static void riscv_aplic_class_init(ObjectClass *klass, const void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); device_class_set_props(dc, riscv_aplic_properties); dc->realize = riscv_aplic_realize; + rc->phases.enter = riscv_aplic_reset_enter; dc->vmsd = &vmstate_riscv_aplic; } -- 2.53.0 From: Jim Shu <jim.shu@sifive.com> Clearing IMSIC registers and qemu_irq in the reset function Signed-off-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260428160103.3551125-4-jim.shu@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/intc/riscv_imsic.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/hw/intc/riscv_imsic.c b/hw/intc/riscv_imsic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/riscv_imsic.c +++ b/hw/intc/riscv_imsic.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps riscv_imsic_ops = { } }; +static void riscv_imsic_reset_enter(Object *obj, ResetType type) +{ + RISCVIMSICState *imsic = RISCV_IMSIC(obj); + int i; + + memset(imsic->eidelivery, 0, sizeof(uint32_t) * imsic->num_pages); + memset(imsic->eithreshold, 0, sizeof(uint32_t) * imsic->num_pages); + + for (i = 0; i < imsic->num_eistate; i++) { + imsic->eistate[i] &= ~IMSIC_EISTATE_ENABLED; + } + + for (i = 0; i < imsic->num_pages; i++) { + qemu_irq_lower(imsic->external_irqs[i]); + } +} + static void riscv_imsic_realize(DeviceState *dev, Error **errp) { RISCVIMSICState *imsic = RISCV_IMSIC(dev); @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_riscv_imsic = { static void riscv_imsic_class_init(ObjectClass *klass, const void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); device_class_set_props(dc, riscv_imsic_properties); dc->realize = riscv_imsic_realize; + rc->phases.enter = riscv_imsic_reset_enter; dc->vmsd = &vmstate_riscv_imsic; } -- 2.53.0 From: Jim Shu <jim.shu@sifive.com> Add the trace events for APLIC read/write functions. Signed-off-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260428160103.3551125-5-jim.shu@sifive.com> [ Changes by AF: - Init val to zero to avoid uninitialised build errors ] Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/intc/riscv_aplic.c | 63 ++++++++++++++++++++++++++----------------- hw/intc/trace-events | 4 +++ 2 files changed, 42 insertions(+), 25 deletions(-) diff --git a/hw/intc/riscv_aplic.c b/hw/intc/riscv_aplic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/riscv_aplic.c +++ b/hw/intc/riscv_aplic.c @@ -XXX,XX +XXX,XX @@ #include "system/tcg.h" #include "kvm/kvm_riscv.h" #include "migration/vmstate.h" +#include "trace.h" #define APLIC_MAX_IDC (1UL << 14) #define APLIC_MAX_SOURCE 1024 @@ -XXX,XX +XXX,XX @@ static void riscv_aplic_request(void *opaque, int irq, int level) static uint64_t riscv_aplic_read(void *opaque, hwaddr addr, unsigned size) { uint32_t irq, word, idc; + uint64_t val = 0; RISCVAPLICState *aplic = opaque; /* Reads must be 4 byte words */ @@ -XXX,XX +XXX,XX @@ static uint64_t riscv_aplic_read(void *opaque, hwaddr addr, unsigned size) } if (addr == APLIC_DOMAINCFG) { - return APLIC_DOMAINCFG_RDONLY | aplic->domaincfg | - (aplic->msimode ? APLIC_DOMAINCFG_DM : 0); + val = APLIC_DOMAINCFG_RDONLY | aplic->domaincfg | + (aplic->msimode ? APLIC_DOMAINCFG_DM : 0); } else if ((APLIC_SOURCECFG_BASE <= addr) && (addr < (APLIC_SOURCECFG_BASE + (aplic->num_irqs - 1) * 4))) { irq = ((addr - APLIC_SOURCECFG_BASE) >> 2) + 1; - return aplic->sourcecfg[irq]; + val = aplic->sourcecfg[irq]; } else if (aplic->mmode && aplic->msimode && (addr == APLIC_MMSICFGADDR)) { - return aplic->mmsicfgaddr; + val = aplic->mmsicfgaddr; } else if (aplic->mmode && aplic->msimode && (addr == APLIC_MMSICFGADDRH)) { - return aplic->mmsicfgaddrH; + val = aplic->mmsicfgaddrH; } else if (aplic->mmode && aplic->msimode && (addr == APLIC_SMSICFGADDR)) { /* @@ -XXX,XX +XXX,XX @@ static uint64_t riscv_aplic_read(void *opaque, hwaddr addr, unsigned size) * only zero in at least one of the supervisor-level child * domains). */ - return (aplic->num_children) ? aplic->smsicfgaddr : 0; + val = (aplic->num_children) ? aplic->smsicfgaddr : 0; } else if (aplic->mmode && aplic->msimode && (addr == APLIC_SMSICFGADDRH)) { - return (aplic->num_children) ? aplic->smsicfgaddrH : 0; + val = (aplic->num_children) ? aplic->smsicfgaddrH : 0; } else if ((APLIC_SETIP_BASE <= addr) && (addr < (APLIC_SETIP_BASE + aplic->bitfield_words * 4))) { word = (addr - APLIC_SETIP_BASE) >> 2; - return riscv_aplic_read_pending_word(aplic, word); + val = riscv_aplic_read_pending_word(aplic, word); } else if (addr == APLIC_SETIPNUM) { - return 0; + val = 0; } else if ((APLIC_CLRIP_BASE <= addr) && (addr < (APLIC_CLRIP_BASE + aplic->bitfield_words * 4))) { word = (addr - APLIC_CLRIP_BASE) >> 2; - return riscv_aplic_read_input_word(aplic, word); + val = riscv_aplic_read_input_word(aplic, word); } else if (addr == APLIC_CLRIPNUM) { - return 0; + val = 0; } else if ((APLIC_SETIE_BASE <= addr) && (addr < (APLIC_SETIE_BASE + aplic->bitfield_words * 4))) { word = (addr - APLIC_SETIE_BASE) >> 2; - return riscv_aplic_read_enabled_word(aplic, word); + val = riscv_aplic_read_enabled_word(aplic, word); } else if (addr == APLIC_SETIENUM) { - return 0; + val = 0; } else if ((APLIC_CLRIE_BASE <= addr) && (addr < (APLIC_CLRIE_BASE + aplic->bitfield_words * 4))) { - return 0; + val = 0; } else if (addr == APLIC_CLRIENUM) { - return 0; + val = 0; } else if (addr == APLIC_SETIPNUM_LE) { - return 0; + val = 0; } else if (addr == APLIC_SETIPNUM_BE) { - return 0; + val = 0; } else if (addr == APLIC_GENMSI) { - return (aplic->msimode) ? aplic->genmsi : 0; + val = (aplic->msimode) ? aplic->genmsi : 0; } else if ((APLIC_TARGET_BASE <= addr) && (addr < (APLIC_TARGET_BASE + (aplic->num_irqs - 1) * 4))) { irq = ((addr - APLIC_TARGET_BASE) >> 2) + 1; if (!riscv_aplic_source_active(aplic, irq)) { - return 0; + val = 0; + } else { + val = aplic->target[irq]; } - return aplic->target[irq]; } else if (!aplic->msimode && (APLIC_IDC_BASE <= addr) && (addr < (APLIC_IDC_BASE + aplic->num_harts * APLIC_IDC_SIZE))) { idc = (addr - APLIC_IDC_BASE) / APLIC_IDC_SIZE; switch (addr - (APLIC_IDC_BASE + idc * APLIC_IDC_SIZE)) { case APLIC_IDC_IDELIVERY: - return aplic->idelivery[idc]; + val = aplic->idelivery[idc]; + break; case APLIC_IDC_IFORCE: - return aplic->iforce[idc]; + val = aplic->iforce[idc]; + break; case APLIC_IDC_ITHRESHOLD: - return aplic->ithreshold[idc]; + val = aplic->ithreshold[idc]; + break; case APLIC_IDC_TOPI: - return riscv_aplic_idc_topi(aplic, idc); + val = riscv_aplic_idc_topi(aplic, idc); + break; case APLIC_IDC_CLAIMI: - return riscv_aplic_idc_claimi(aplic, idc); + val = riscv_aplic_idc_claimi(aplic, idc); + break; default: goto err; }; } + trace_riscv_aplic_read(addr, size, val); + return val; + err: qemu_log_mask(LOG_GUEST_ERROR, "%s: Invalid register read 0x%" HWADDR_PRIx "\n", @@ -XXX,XX +XXX,XX @@ static void riscv_aplic_write(void *opaque, hwaddr addr, uint64_t value, goto err; } + trace_riscv_aplic_write(addr, size, value); + if (addr == APLIC_DOMAINCFG) { /* Only IE bit writable at the moment */ value &= APLIC_DOMAINCFG_IE; diff --git a/hw/intc/trace-events b/hw/intc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/trace-events +++ b/hw/intc/trace-events @@ -XXX,XX +XXX,XX @@ loongarch_msi_set_irq(int irq_num) "set msi irq %d" loongarch_extioi_setirq(int irq, int level) "set extirq irq %d level %d" loongarch_extioi_readw(uint64_t addr, uint64_t val) "addr: 0x%"PRIx64 "val: 0x%" PRIx64 loongarch_extioi_writew(uint64_t addr, uint64_t val) "addr: 0x%"PRIx64 "val: 0x%" PRIx64 + +# riscv_aplic.c +riscv_aplic_read(uint64_t offset, unsigned size, uint64_t value) "offset: 0x%" PRIx64 ", size: %u, value: 0x%" PRIx64 +riscv_aplic_write(uint64_t offset, unsigned size, uint64_t value) "offset: 0x%" PRIx64 ", size: %u, value: 0x%" PRIx64 -- 2.53.0 From: Jay Chang <jay.chang@sifive.com> When software clears CMD_ILL or CQMF error bits by writing 1 to CQCSR, the IOMMU should re-check the command queue and continue processing pending commands if head != tail. Per RISC-V IOMMU specification : If command-queue access leads to a memory fault then the command-queue-memory-fault bit is set to 1 and the commandqueue stalls until this bit is cleared. To re-enable command processing, software should clear this bit by writing 1. Signed-off-by: Jay Chang <jay.chang@sifive.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Nutty Liu <nutty.liu@hotmail.com> Message-ID: <20260518070143.8405-1-jay.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/hw/riscv/riscv-iommu.c b/hw/riscv/riscv-iommu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.c +++ b/hw/riscv/riscv-iommu.c @@ -XXX,XX +XXX,XX @@ static void riscv_iommu_process_cq_control(RISCVIOMMUState *s) } riscv_iommu_reg_mod32(s, RISCV_IOMMU_REG_CQCSR, ctrl_set, ctrl_clr); + + /* + * After clearing error bits (CMD_ILL, CQMF), if queue is still active, + * re-process pending command. + */ + ctrl_set = riscv_iommu_reg_get32(s, RISCV_IOMMU_REG_CQCSR); + if ((ctrl_set & RISCV_IOMMU_CQCSR_CQON) && + !(ctrl_set & (RISCV_IOMMU_CQCSR_CMD_ILL | RISCV_IOMMU_CQCSR_CQMF))) { + riscv_iommu_process_cq_tail(s); + } } static void riscv_iommu_process_fq_control(RISCVIOMMUState *s) -- 2.53.0 From: Alistair Francis <alistair.francis@wdc.com> The following changes since commit 222059a0fccf4af3be776fe35a5ea2d6a68f9a0b: Merge tag 'pull-ppc-20221221' of https://gitlab.com/danielhb/qemu into staging (2022-12-21 18:08:09 +0000) are available in the Git repository at: https://github.com/alistair23/qemu.git tags/pull-riscv-to-apply-20221222-1 for you to fetch changes up to 71a9bc59728a054036f3db7dd82dab8f8bd2baf9: hw/intc: sifive_plic: Fix the pending register range check (2022-12-22 08:36:30 +1000) ---------------------------------------------------------------- First RISC-V PR for QEMU 8.0 * Fix PMP propagation for tlb * Collection of bug fixes * Add the `FIELDx_1CLEAR()` macro * Bump the OpenTitan supported version * Add smstateen support * Support native debug icount trigger * Remove the redundant ipi-id property in the virt machine * Support cache-related PMU events in virtual mode * Add some missing PolarFire SoC io regions * Fix mret exception cause when no pmp rule is configured * Fix bug where disabling compressed instructions would crash QEMU * Add Zawrs ISA extension support * A range of code refactoring and cleanups ---------------------------------------------------------------- Anup Patel (1): target/riscv: Typo fix in sstc() predicate Atish Patra (1): hw/riscv: virt: Remove the redundant ipi-id property Bin Meng (20): target/riscv: Add some comments for sstatus CSR in riscv_cpu_dump_state() target/riscv: Fix mret exception cause when no pmp rule is configured target/riscv: Simplify helper_sret() a little bit target/riscv: Clear mstatus.MPRV when leaving M-mode for priv spec 1.12+ hw/riscv: Select MSI_NONBROKEN in SIFIVE_PLIC hw/intc: Select MSI_NONBROKEN in RISC-V AIA interrupt controllers hw/riscv: Fix opentitan dependency to SIFIVE_PLIC hw/riscv: Sort machines Kconfig options in alphabetical order hw/riscv: spike: Remove misleading comments hw/intc: sifive_plic: Drop PLICMode_H hw/intc: sifive_plic: Improve robustness of the PLIC config parser hw/intc: sifive_plic: Use error_setg() to propagate the error up via errp in sifive_plic_realize() hw/intc: sifive_plic: Update "num-sources" property default value hw/riscv: microchip_pfsoc: Fix the number of interrupt sources of PLIC hw/riscv: sifive_e: Fix the number of interrupt sources of PLIC hw/riscv: sifive_u: Avoid using magic number for "riscv, ndev" hw/riscv: virt: Fix the value of "riscv, ndev" in the dtb hw/intc: sifive_plic: Change "priority-base" to start from interrupt source 0 hw/riscv: opentitan: Drop "hartid-base" and "priority-base" initialization hw/intc: sifive_plic: Fix the pending register range check Christoph Muellner (1): RISC-V: Add Zawrs ISA extension support Conor Dooley (3): hw/misc: pfsoc: add fabric clocks to ioscb hw/riscv: pfsoc: add missing FICs as unimplemented hw/{misc, riscv}: pfsoc: add system controller as unimplemented Frédéric Pétrot (1): hw/intc: sifive_plic: Renumber the S irqs for numa support Jim Shu (2): target/riscv: support cache-related PMU events in virtual mode hw/intc: sifive_plic: fix out-of-bound access of source_priority array LIU Zhiwei (5): target/riscv: Fix PMP propagation for tlb target/riscv: Add itrigger support when icount is not enabled target/riscv: Add itrigger support when icount is enabled target/riscv: Enable native debug itrigger target/riscv: Add itrigger_enabled field to CPURISCVState Mayuresh Chitale (3): target/riscv: Add smstateen support target/riscv: smstateen check for h/s/envcfg target/riscv: generate virtual instruction exception Richard Henderson (4): tcg/riscv: Fix range matched by TCG_CT_CONST_M12 tcg/riscv: Fix reg overlap case in tcg_out_addsub2 tcg/riscv: Fix base register for user-only qemu_ld/st target/riscv: Set pc_succ_insn for !rvc illegal insn Wilfred Mallawa (4): hw/registerfields: add `FIELDx_1CLEAR()` macro hw/ssi/ibex_spi: implement `FIELD32_1CLEAR` macro hw/riscv/opentitan: bump opentitan hw/riscv/opentitan: add aon_timer base unimpl include/hw/intc/sifive_plic.h | 1 - include/hw/misc/mchp_pfsoc_ioscb.h | 4 + include/hw/misc/mchp_pfsoc_sysreg.h | 1 + include/hw/registerfields.h | 22 ++ include/hw/riscv/microchip_pfsoc.h | 7 +- include/hw/riscv/opentitan.h | 10 +- include/hw/riscv/shakti_c.h | 2 +- include/hw/riscv/sifive_e.h | 9 +- include/hw/riscv/sifive_u.h | 2 +- include/hw/riscv/virt.h | 8 +- target/riscv/cpu.h | 10 + target/riscv/cpu_bits.h | 37 +++ target/riscv/debug.h | 13 + target/riscv/helper.h | 2 + target/riscv/pmp.h | 6 +- target/riscv/insn32.decode | 4 + hw/intc/sifive_plic.c | 66 +++-- hw/misc/mchp_pfsoc_ioscb.c | 78 ++++- hw/misc/mchp_pfsoc_sysreg.c | 18 +- hw/riscv/microchip_pfsoc.c | 121 ++++---- hw/riscv/opentitan.c | 26 +- hw/riscv/sifive_u.c | 3 +- hw/riscv/spike.c | 1 - hw/riscv/virt.c | 7 +- hw/ssi/ibex_spi_host.c | 21 +- target/riscv/cpu.c | 11 + target/riscv/cpu_helper.c | 26 +- target/riscv/csr.c | 393 ++++++++++++++++++++++++- target/riscv/debug.c | 205 +++++++++++++ target/riscv/machine.c | 36 +++ target/riscv/op_helper.c | 28 +- target/riscv/pmp.c | 90 ++---- target/riscv/translate.c | 54 +++- target/riscv/insn_trans/trans_privileged.c.inc | 4 +- target/riscv/insn_trans/trans_rvi.c.inc | 8 +- target/riscv/insn_trans/trans_rvv.c.inc | 4 +- target/riscv/insn_trans/trans_rvzawrs.c.inc | 51 ++++ tcg/riscv/tcg-target.c.inc | 68 +++-- hw/intc/Kconfig | 3 + hw/riscv/Kconfig | 22 +- tests/tcg/Makefile.target | 2 + tests/tcg/riscv64/Makefile.target | 6 + tests/tcg/riscv64/test-noc.S | 32 ++ 43 files changed, 1256 insertions(+), 266 deletions(-) create mode 100644 target/riscv/insn_trans/trans_rvzawrs.c.inc create mode 100644 tests/tcg/riscv64/test-noc.S From: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Only the pmp index that be checked by pmp_hart_has_privs can be used by pmp_get_tlb_size to avoid an error pmp index. Before modification, we may use an error pmp index. For example, we check address 0x4fc, and the size 0x4 in pmp_hart_has_privs. If there is an pmp rule, valid range is [0x4fc, 0x500), then pmp_hart_has_privs will return true; However, this checked pmp index is discarded as pmp_hart_has_privs return bool value. In pmp_is_range_in_tlb, it will traverse all pmp rules. The tlb_sa will be 0x0, and tlb_ea will be 0xfff. If there is a pmp rule [0x10, 0x14), it will be misused as it is legal in pmp_get_tlb_size. As we have already known the correct pmp index, just remove the remove the pmp_is_range_in_tlb and get tlb size directly from pmp_get_tlb_size. Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221012060016.30856-1-zhiwei_liu@linux.alibaba.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/pmp.h | 6 +-- target/riscv/cpu_helper.c | 16 ++++--- target/riscv/pmp.c | 90 +++++++++++++-------------------------- 3 files changed, 42 insertions(+), 70 deletions(-) diff --git a/target/riscv/pmp.h b/target/riscv/pmp.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/pmp.h +++ b/target/riscv/pmp.h @@ -XXX,XX +XXX,XX @@ target_ulong mseccfg_csr_read(CPURISCVState *env); void pmpaddr_csr_write(CPURISCVState *env, uint32_t addr_index, target_ulong val); target_ulong pmpaddr_csr_read(CPURISCVState *env, uint32_t addr_index); -bool pmp_hart_has_privs(CPURISCVState *env, target_ulong addr, +int pmp_hart_has_privs(CPURISCVState *env, target_ulong addr, target_ulong size, pmp_priv_t privs, pmp_priv_t *allowed_privs, target_ulong mode); -bool pmp_is_range_in_tlb(CPURISCVState *env, hwaddr tlb_sa, - target_ulong *tlb_size); +target_ulong pmp_get_tlb_size(CPURISCVState *env, int pmp_index, + target_ulong tlb_sa, target_ulong tlb_ea); void pmp_update_rule_addr(CPURISCVState *env, uint32_t pmp_index); void pmp_update_rule_nums(CPURISCVState *env); uint32_t pmp_get_num_rules(CPURISCVState *env); diff --git a/target/riscv/cpu_helper.c b/target/riscv/cpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_helper.c +++ b/target/riscv/cpu_helper.c @@ -XXX,XX +XXX,XX @@ static int get_physical_address_pmp(CPURISCVState *env, int *prot, int mode) { pmp_priv_t pmp_priv; - target_ulong tlb_size_pmp = 0; + int pmp_index = -1; if (!riscv_feature(env, RISCV_FEATURE_PMP)) { *prot = PAGE_READ | PAGE_WRITE | PAGE_EXEC; return TRANSLATE_SUCCESS; } - if (!pmp_hart_has_privs(env, addr, size, 1 << access_type, &pmp_priv, - mode)) { + pmp_index = pmp_hart_has_privs(env, addr, size, 1 << access_type, + &pmp_priv, mode); + if (pmp_index < 0) { *prot = 0; return TRANSLATE_PMP_FAIL; } *prot = pmp_priv_to_page_prot(pmp_priv); - if (tlb_size != NULL) { - if (pmp_is_range_in_tlb(env, addr & ~(*tlb_size - 1), &tlb_size_pmp)) { - *tlb_size = tlb_size_pmp; - } + if ((tlb_size != NULL) && pmp_index != MAX_RISCV_PMPS) { + target_ulong tlb_sa = addr & ~(TARGET_PAGE_SIZE - 1); + target_ulong tlb_ea = tlb_sa + TARGET_PAGE_SIZE - 1; + + *tlb_size = pmp_get_tlb_size(env, pmp_index, tlb_sa, tlb_ea); } return TRANSLATE_SUCCESS; diff --git a/target/riscv/pmp.c b/target/riscv/pmp.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/pmp.c +++ b/target/riscv/pmp.c @@ -XXX,XX +XXX,XX @@ static bool pmp_hart_has_privs_default(CPURISCVState *env, target_ulong addr, /* * Check if the address has required RWX privs to complete desired operation + * Return PMP rule index if a pmp rule match + * Return MAX_RISCV_PMPS if default match + * Return negtive value if no match */ -bool pmp_hart_has_privs(CPURISCVState *env, target_ulong addr, +int pmp_hart_has_privs(CPURISCVState *env, target_ulong addr, target_ulong size, pmp_priv_t privs, pmp_priv_t *allowed_privs, target_ulong mode) { @@ -XXX,XX +XXX,XX @@ bool pmp_hart_has_privs(CPURISCVState *env, target_ulong addr, /* Short cut if no rules */ if (0 == pmp_get_num_rules(env)) { - return pmp_hart_has_privs_default(env, addr, size, privs, - allowed_privs, mode); + if (pmp_hart_has_privs_default(env, addr, size, privs, + allowed_privs, mode)) { + ret = MAX_RISCV_PMPS; + } } if (size == 0) { @@ -XXX,XX +XXX,XX @@ bool pmp_hart_has_privs(CPURISCVState *env, target_ulong addr, if ((s + e) == 1) { qemu_log_mask(LOG_GUEST_ERROR, "pmp violation - access is partially inside\n"); - ret = 0; + ret = -1; break; } @@ -XXX,XX +XXX,XX @@ bool pmp_hart_has_privs(CPURISCVState *env, target_ulong addr, } } - ret = ((privs & *allowed_privs) == privs); + if ((privs & *allowed_privs) == privs) { + ret = i; + } break; } } /* No rule matched */ if (ret == -1) { - return pmp_hart_has_privs_default(env, addr, size, privs, - allowed_privs, mode); + if (pmp_hart_has_privs_default(env, addr, size, privs, + allowed_privs, mode)) { + ret = MAX_RISCV_PMPS; + } } - return ret == 1 ? true : false; + return ret; } /* @@ -XXX,XX +XXX,XX @@ target_ulong mseccfg_csr_read(CPURISCVState *env) * Calculate the TLB size if the start address or the end address of * PMP entry is presented in the TLB page. */ -static target_ulong pmp_get_tlb_size(CPURISCVState *env, int pmp_index, - target_ulong tlb_sa, target_ulong tlb_ea) +target_ulong pmp_get_tlb_size(CPURISCVState *env, int pmp_index, + target_ulong tlb_sa, target_ulong tlb_ea) { target_ulong pmp_sa = env->pmp_state.addr[pmp_index].sa; target_ulong pmp_ea = env->pmp_state.addr[pmp_index].ea; - if (pmp_sa >= tlb_sa && pmp_ea <= tlb_ea) { - return pmp_ea - pmp_sa + 1; - } - - if (pmp_sa >= tlb_sa && pmp_sa <= tlb_ea && pmp_ea >= tlb_ea) { - return tlb_ea - pmp_sa + 1; - } - - if (pmp_ea <= tlb_ea && pmp_ea >= tlb_sa && pmp_sa <= tlb_sa) { - return pmp_ea - tlb_sa + 1; - } - - return 0; -} - -/* - * Check is there a PMP entry which range covers this page. If so, - * try to find the minimum granularity for the TLB size. - */ -bool pmp_is_range_in_tlb(CPURISCVState *env, hwaddr tlb_sa, - target_ulong *tlb_size) -{ - int i; - target_ulong val; - target_ulong tlb_ea = (tlb_sa + TARGET_PAGE_SIZE - 1); - - for (i = 0; i < MAX_RISCV_PMPS; i++) { - val = pmp_get_tlb_size(env, i, tlb_sa, tlb_ea); - if (val) { - if (*tlb_size == 0 || *tlb_size > val) { - *tlb_size = val; - } - } - } - - if (*tlb_size != 0) { + if (pmp_sa <= tlb_sa && pmp_ea >= tlb_ea) { + return TARGET_PAGE_SIZE; + } else { /* - * At this point we have a tlb_size that is the smallest possible size - * That fits within a TARGET_PAGE_SIZE and the PMP region. - * - * If the size is less then TARGET_PAGE_SIZE we drop the size to 1. - * This means the result isn't cached in the TLB and is only used for - * a single translation. - */ - if (*tlb_size < TARGET_PAGE_SIZE) { - *tlb_size = 1; - } - - return true; + * At this point we have a tlb_size that is the smallest possible size + * That fits within a TARGET_PAGE_SIZE and the PMP region. + * + * If the size is less then TARGET_PAGE_SIZE we drop the size to 1. + * This means the result isn't cached in the TLB and is only used for + * a single translation. + */ + return 1; } - - return false; } /* -- 2.38.1 From: Wilfred Mallawa <wilfred.mallawa@wdc.com> Adds a helper macro that implements the register `w1c` functionality. Ex: uint32_t data = FIELD32_1CLEAR(val, REG, FIELD); If ANY bits of the specified `FIELD` is set then the respective field is cleared and returned to `data`. If the field is cleared (0), then no change and val is returned. Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221017054950.317584-2-wilfred.mallawa@opensource.wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/registerfields.h | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/include/hw/registerfields.h b/include/hw/registerfields.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/registerfields.h +++ b/include/hw/registerfields.h @@ -XXX,XX +XXX,XX @@ R_ ## reg ## _ ## field ## _LENGTH, _v.v); \ _d; }) +/* + * Clear the specified field in storage if + * any field bits are set, else no changes made. Implements + * single/multi-bit `w1c` + * + */ +#define FIELD8_1CLEAR(storage, reg, field) \ + (FIELD_EX8(storage, reg, field) ? \ + FIELD_DP8(storage, reg, field, 0x00) : storage) + +#define FIELD16_1CLEAR(storage, reg, field) \ + (FIELD_EX16(storage, reg, field) ? \ + FIELD_DP16(storage, reg, field, 0x00) : storage) + +#define FIELD32_1CLEAR(storage, reg, field) \ + (FIELD_EX32(storage, reg, field) ? \ + FIELD_DP32(storage, reg, field, 0x00) : storage) + +#define FIELD64_1CLEAR(storage, reg, field) \ + (FIELD_EX64(storage, reg, field) ? \ + FIELD_DP64(storage, reg, field, 0x00) : storage) + #define FIELD_SDP8(storage, reg, field, val) ({ \ struct { \ signed int v:R_ ## reg ## _ ## field ## _LENGTH; \ -- 2.38.1 From: Wilfred Mallawa <wilfred.mallawa@wdc.com> use the `FIELD32_1CLEAR` macro to implement register `rw1c` functionality to `ibex_spi`. This change was tested by running the `SPI_HOST` from TockOS. Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221017054950.317584-3-wilfred.mallawa@opensource.wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/ssi/ibex_spi_host.c | 21 +++++++++------------ 1 file changed, 9 insertions(+), 12 deletions(-) diff --git a/hw/ssi/ibex_spi_host.c b/hw/ssi/ibex_spi_host.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/ibex_spi_host.c +++ b/hw/ssi/ibex_spi_host.c @@ -XXX,XX +XXX,XX @@ static void ibex_spi_host_write(void *opaque, hwaddr addr, { IbexSPIHostState *s = opaque; uint32_t val32 = val64; - uint32_t shift_mask = 0xff, status = 0, data = 0; + uint32_t shift_mask = 0xff, status = 0; uint8_t txqd_len; trace_ibex_spi_host_write(addr, size, val64); @@ -XXX,XX +XXX,XX @@ static void ibex_spi_host_write(void *opaque, hwaddr addr, case IBEX_SPI_HOST_INTR_STATE: /* rw1c status register */ if (FIELD_EX32(val32, INTR_STATE, ERROR)) { - data = FIELD_DP32(data, INTR_STATE, ERROR, 0); + s->regs[addr] = FIELD32_1CLEAR(s->regs[addr], INTR_STATE, ERROR); } if (FIELD_EX32(val32, INTR_STATE, SPI_EVENT)) { - data = FIELD_DP32(data, INTR_STATE, SPI_EVENT, 0); + s->regs[addr] = FIELD32_1CLEAR(s->regs[addr], INTR_STATE, SPI_EVENT); } - s->regs[addr] = data; break; case IBEX_SPI_HOST_INTR_ENABLE: s->regs[addr] = val32; @@ -XXX,XX +XXX,XX @@ static void ibex_spi_host_write(void *opaque, hwaddr addr, * When an error occurs, the corresponding bit must be cleared * here before issuing any further commands */ - status = s->regs[addr]; /* rw1c status register */ if (FIELD_EX32(val32, ERROR_STATUS, CMDBUSY)) { - status = FIELD_DP32(status, ERROR_STATUS, CMDBUSY, 0); + s->regs[addr] = FIELD32_1CLEAR(s->regs[addr], ERROR_STATUS, CMDBUSY); } if (FIELD_EX32(val32, ERROR_STATUS, OVERFLOW)) { - status = FIELD_DP32(status, ERROR_STATUS, OVERFLOW, 0); + s->regs[addr] = FIELD32_1CLEAR(s->regs[addr], ERROR_STATUS, OVERFLOW); } if (FIELD_EX32(val32, ERROR_STATUS, UNDERFLOW)) { - status = FIELD_DP32(status, ERROR_STATUS, UNDERFLOW, 0); + s->regs[addr] = FIELD32_1CLEAR(s->regs[addr], ERROR_STATUS, UNDERFLOW); } if (FIELD_EX32(val32, ERROR_STATUS, CMDINVAL)) { - status = FIELD_DP32(status, ERROR_STATUS, CMDINVAL, 0); + s->regs[addr] = FIELD32_1CLEAR(s->regs[addr], ERROR_STATUS, CMDINVAL); } if (FIELD_EX32(val32, ERROR_STATUS, CSIDINVAL)) { - status = FIELD_DP32(status, ERROR_STATUS, CSIDINVAL, 0); + s->regs[addr] = FIELD32_1CLEAR(s->regs[addr], ERROR_STATUS, CSIDINVAL); } if (FIELD_EX32(val32, ERROR_STATUS, ACCESSINVAL)) { - status = FIELD_DP32(status, ERROR_STATUS, ACCESSINVAL, 0); + s->regs[addr] = FIELD32_1CLEAR(s->regs[addr], ERROR_STATUS, ACCESSINVAL); } - s->regs[addr] = status; break; case IBEX_SPI_HOST_EVENT_ENABLE: /* Controls which classes of SPI events raise an interrupt. */ -- 2.38.1 From: Richard Henderson <richard.henderson@linaro.org> We were matching a signed 13-bit range, not a 12-bit range. Expand the commentary within the function and be explicit about all of the ranges. Reported-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221022095821.2441874-1-richard.henderson@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- tcg/riscv/tcg-target.c.inc | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) diff --git a/tcg/riscv/tcg-target.c.inc b/tcg/riscv/tcg-target.c.inc index XXXXXXX..XXXXXXX 100644 --- a/tcg/riscv/tcg-target.c.inc +++ b/tcg/riscv/tcg-target.c.inc @@ -XXX,XX +XXX,XX @@ static bool tcg_target_const_match(int64_t val, TCGType type, int ct) if ((ct & TCG_CT_CONST_ZERO) && val == 0) { return 1; } - if ((ct & TCG_CT_CONST_S12) && val == sextreg(val, 0, 12)) { + /* + * Sign extended from 12 bits: [-0x800, 0x7ff]. + * Used for most arithmetic, as this is the isa field. + */ + if ((ct & TCG_CT_CONST_S12) && val >= -0x800 && val <= 0x7ff) { return 1; } - if ((ct & TCG_CT_CONST_N12) && -val == sextreg(-val, 0, 12)) { + /* + * Sign extended from 12 bits, negated: [-0x7ff, 0x800]. + * Used for subtraction, where a constant must be handled by ADDI. + */ + if ((ct & TCG_CT_CONST_N12) && val >= -0x7ff && val <= 0x800) { return 1; } - if ((ct & TCG_CT_CONST_M12) && val >= -0xfff && val <= 0xfff) { + /* + * Sign extended from 12 bits, +/- matching: [-0x7ff, 0x7ff]. + * Used by addsub2, which may need the negative operation, + * and requires the modified constant to be representable. + */ + if ((ct & TCG_CT_CONST_M12) && val >= -0x7ff && val <= 0x7ff) { return 1; } return 0; -- 2.38.1 From: Richard Henderson <richard.henderson@linaro.org> There was a typo using opc_addi instead of opc_add with the two registers. While we're at it, simplify the gating test to al == bl to improve dynamic scheduling even when the output register does not overlap the inputs. Reported-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221020233836.2341671-1-richard.henderson@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- tcg/riscv/tcg-target.c.inc | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/tcg/riscv/tcg-target.c.inc b/tcg/riscv/tcg-target.c.inc index XXXXXXX..XXXXXXX 100644 --- a/tcg/riscv/tcg-target.c.inc +++ b/tcg/riscv/tcg-target.c.inc @@ -XXX,XX +XXX,XX @@ static void tcg_out_addsub2(TCGContext *s, if (cbl) { tcg_out_opc_imm(s, opc_addi, rl, al, bl); tcg_out_opc_imm(s, OPC_SLTIU, TCG_REG_TMP0, rl, bl); - } else if (rl == al && rl == bl) { + } else if (al == bl) { + /* + * If the input regs overlap, this is a simple doubling + * and carry-out is the input msb. This special case is + * required when the output reg overlaps the input, + * but we might as well use it always. + */ tcg_out_opc_imm(s, OPC_SLTI, TCG_REG_TMP0, al, 0); - tcg_out_opc_reg(s, opc_addi, rl, al, bl); + tcg_out_opc_reg(s, opc_add, rl, al, al); } else { tcg_out_opc_reg(s, opc_add, rl, al, bl); tcg_out_opc_reg(s, OPC_SLTU, TCG_REG_TMP0, -- 2.38.1 From: Richard Henderson <richard.henderson@linaro.org> When guest_base != 0, we were not coordinating the usage of TCG_REG_TMP0 as base properly, leading to a previous zero-extend of the input address being discarded. Shuffle the alignment check to the front, because that does not depend on the zero-extend, and it keeps the register usage clear. Set base after each step of the address arithmetic instead of before. Return the base register used from tcg_out_tlb_load, so as to keep that register choice localized to that function. Reported-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221023233337.2846860-1-richard.henderson@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- tcg/riscv/tcg-target.c.inc | 39 +++++++++++++++++++++----------------- 1 file changed, 22 insertions(+), 17 deletions(-) diff --git a/tcg/riscv/tcg-target.c.inc b/tcg/riscv/tcg-target.c.inc index XXXXXXX..XXXXXXX 100644 --- a/tcg/riscv/tcg-target.c.inc +++ b/tcg/riscv/tcg-target.c.inc @@ -XXX,XX +XXX,XX @@ static void tcg_out_goto(TCGContext *s, const tcg_insn_unit *target) tcg_debug_assert(ok); } -static void tcg_out_tlb_load(TCGContext *s, TCGReg addrl, - TCGReg addrh, MemOpIdx oi, - tcg_insn_unit **label_ptr, bool is_load) +static TCGReg tcg_out_tlb_load(TCGContext *s, TCGReg addrl, + TCGReg addrh, MemOpIdx oi, + tcg_insn_unit **label_ptr, bool is_load) { MemOp opc = get_memop(oi); unsigned s_bits = opc & MO_SIZE; @@ -XXX,XX +XXX,XX @@ static void tcg_out_tlb_load(TCGContext *s, TCGReg addrl, addrl = TCG_REG_TMP0; } tcg_out_opc_reg(s, OPC_ADD, TCG_REG_TMP0, TCG_REG_TMP2, addrl); + return TCG_REG_TMP0; } static void add_qemu_ldst_label(TCGContext *s, int is_ld, MemOpIdx oi, @@ -XXX,XX +XXX,XX @@ static void tcg_out_qemu_ld(TCGContext *s, const TCGArg *args, bool is_64) #else unsigned a_bits; #endif - TCGReg base = TCG_REG_TMP0; + TCGReg base; data_regl = *args++; data_regh = (TCG_TARGET_REG_BITS == 32 && is_64 ? *args++ : 0); @@ -XXX,XX +XXX,XX @@ static void tcg_out_qemu_ld(TCGContext *s, const TCGArg *args, bool is_64) opc = get_memop(oi); #if defined(CONFIG_SOFTMMU) - tcg_out_tlb_load(s, addr_regl, addr_regh, oi, label_ptr, 1); + base = tcg_out_tlb_load(s, addr_regl, addr_regh, oi, label_ptr, 1); tcg_out_qemu_ld_direct(s, data_regl, data_regh, base, opc, is_64); add_qemu_ldst_label(s, 1, oi, (is_64 ? TCG_TYPE_I64 : TCG_TYPE_I32), data_regl, data_regh, addr_regl, addr_regh, s->code_ptr, label_ptr); #else - if (TCG_TARGET_REG_BITS > TARGET_LONG_BITS) { - tcg_out_ext32u(s, base, addr_regl); - addr_regl = base; - } a_bits = get_alignment_bits(opc); if (a_bits) { tcg_out_test_alignment(s, true, addr_regl, a_bits); } + base = addr_regl; + if (TCG_TARGET_REG_BITS > TARGET_LONG_BITS) { + tcg_out_ext32u(s, TCG_REG_TMP0, base); + base = TCG_REG_TMP0; + } if (guest_base != 0) { - tcg_out_opc_reg(s, OPC_ADD, base, TCG_GUEST_BASE_REG, addr_regl); + tcg_out_opc_reg(s, OPC_ADD, TCG_REG_TMP0, TCG_GUEST_BASE_REG, base); + base = TCG_REG_TMP0; } tcg_out_qemu_ld_direct(s, data_regl, data_regh, base, opc, is_64); #endif @@ -XXX,XX +XXX,XX @@ static void tcg_out_qemu_st(TCGContext *s, const TCGArg *args, bool is_64) #else unsigned a_bits; #endif - TCGReg base = TCG_REG_TMP0; + TCGReg base; data_regl = *args++; data_regh = (TCG_TARGET_REG_BITS == 32 && is_64 ? *args++ : 0); @@ -XXX,XX +XXX,XX @@ static void tcg_out_qemu_st(TCGContext *s, const TCGArg *args, bool is_64) opc = get_memop(oi); #if defined(CONFIG_SOFTMMU) - tcg_out_tlb_load(s, addr_regl, addr_regh, oi, label_ptr, 0); + base = tcg_out_tlb_load(s, addr_regl, addr_regh, oi, label_ptr, 0); tcg_out_qemu_st_direct(s, data_regl, data_regh, base, opc); add_qemu_ldst_label(s, 0, oi, (is_64 ? TCG_TYPE_I64 : TCG_TYPE_I32), data_regl, data_regh, addr_regl, addr_regh, s->code_ptr, label_ptr); #else - if (TCG_TARGET_REG_BITS > TARGET_LONG_BITS) { - tcg_out_ext32u(s, base, addr_regl); - addr_regl = base; - } a_bits = get_alignment_bits(opc); if (a_bits) { tcg_out_test_alignment(s, false, addr_regl, a_bits); } + base = addr_regl; + if (TCG_TARGET_REG_BITS > TARGET_LONG_BITS) { + tcg_out_ext32u(s, TCG_REG_TMP0, base); + base = TCG_REG_TMP0; + } if (guest_base != 0) { - tcg_out_opc_reg(s, OPC_ADD, base, TCG_GUEST_BASE_REG, addr_regl); + tcg_out_opc_reg(s, OPC_ADD, TCG_REG_TMP0, TCG_GUEST_BASE_REG, base); + base = TCG_REG_TMP0; } tcg_out_qemu_st_direct(s, data_regl, data_regh, base, opc); #endif -- 2.38.1 From: Wilfred Mallawa <wilfred.mallawa@wdc.com> This patch updates the OpenTitan model to match the specified register layout as per [1]. Which is also the latest commit of OpenTitan supported by TockOS. Note: Pinmux and Padctrl has been merged into Pinmux [2][3], this patch removes any references to Padctrl. Note: OpenTitan doc [2] has not yet specified much detail regarding this, except for a note that states `TODO: this section needs to be updated to reflect the pinmux/padctrl merger` [1] https://github.com/lowRISC/opentitan/blob/d072ac505f82152678d6e04be95c72b728a347b8/hw/top_earlgrey/sw/autogen/top_earlgrey_memory.h [2] https://docs.opentitan.org/hw/top_earlgrey/doc/design/ [3] https://docs.opentitan.org/hw/ip/pinmux/doc/#overview Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-Id: <20221025043335.339815-2-wilfred.mallawa@opensource.wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/riscv/opentitan.h | 9 ++++----- hw/riscv/opentitan.c | 21 +++++++++++++-------- 2 files changed, 17 insertions(+), 13 deletions(-) diff --git a/include/hw/riscv/opentitan.h b/include/hw/riscv/opentitan.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/riscv/opentitan.h +++ b/include/hw/riscv/opentitan.h @@ -XXX,XX +XXX,XX @@ enum { IBEX_DEV_RSTMGR, IBEX_DEV_CLKMGR, IBEX_DEV_PINMUX, - IBEX_DEV_PADCTRL, IBEX_DEV_USBDEV, IBEX_DEV_FLASH_CTRL, IBEX_DEV_PLIC, @@ -XXX,XX +XXX,XX @@ enum { IBEX_UART0_RX_TIMEOUT_IRQ = 7, IBEX_UART0_RX_PARITY_ERR_IRQ = 8, IBEX_TIMER_TIMEREXPIRED0_0 = 127, - IBEX_SPI_HOST0_ERR_IRQ = 151, - IBEX_SPI_HOST0_SPI_EVENT_IRQ = 152, - IBEX_SPI_HOST1_ERR_IRQ = 153, - IBEX_SPI_HOST1_SPI_EVENT_IRQ = 154, + IBEX_SPI_HOST0_ERR_IRQ = 134, + IBEX_SPI_HOST0_SPI_EVENT_IRQ = 135, + IBEX_SPI_HOST1_ERR_IRQ = 136, + IBEX_SPI_HOST1_SPI_EVENT_IRQ = 137, }; #endif diff --git a/hw/riscv/opentitan.c b/hw/riscv/opentitan.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/opentitan.c +++ b/hw/riscv/opentitan.c @@ -XXX,XX +XXX,XX @@ #include "qemu/units.h" #include "sysemu/sysemu.h" +/* + * This version of the OpenTitan machine currently supports + * OpenTitan RTL version: + * <lowRISC/opentitan@d072ac505f82152678d6e04be95c72b728a347b8> + * + * MMIO mapping as per (specified commit): + * lowRISC/opentitan: hw/top_earlgrey/sw/autogen/top_earlgrey_memory.h + */ static const MemMapEntry ibex_memmap[] = { - [IBEX_DEV_ROM] = { 0x00008000, 0x8000 }, + [IBEX_DEV_ROM] = { 0x00008000, 0x8000 }, [IBEX_DEV_RAM] = { 0x10000000, 0x20000 }, [IBEX_DEV_FLASH] = { 0x20000000, 0x100000 }, [IBEX_DEV_UART] = { 0x40000000, 0x1000 }, @@ -XXX,XX +XXX,XX @@ static const MemMapEntry ibex_memmap[] = { [IBEX_DEV_I2C] = { 0x40080000, 0x1000 }, [IBEX_DEV_PATTGEN] = { 0x400e0000, 0x1000 }, [IBEX_DEV_TIMER] = { 0x40100000, 0x1000 }, - [IBEX_DEV_SENSOR_CTRL] = { 0x40110000, 0x1000 }, [IBEX_DEV_OTP_CTRL] = { 0x40130000, 0x4000 }, [IBEX_DEV_LC_CTRL] = { 0x40140000, 0x1000 }, - [IBEX_DEV_USBDEV] = { 0x40150000, 0x1000 }, + [IBEX_DEV_ALERT_HANDLER] = { 0x40150000, 0x1000 }, [IBEX_DEV_SPI_HOST0] = { 0x40300000, 0x1000 }, [IBEX_DEV_SPI_HOST1] = { 0x40310000, 0x1000 }, + [IBEX_DEV_USBDEV] = { 0x40320000, 0x1000 }, [IBEX_DEV_PWRMGR] = { 0x40400000, 0x1000 }, [IBEX_DEV_RSTMGR] = { 0x40410000, 0x1000 }, [IBEX_DEV_CLKMGR] = { 0x40420000, 0x1000 }, [IBEX_DEV_PINMUX] = { 0x40460000, 0x1000 }, - [IBEX_DEV_PADCTRL] = { 0x40470000, 0x1000 }, + [IBEX_DEV_SENSOR_CTRL] = { 0x40490000, 0x1000 }, [IBEX_DEV_FLASH_CTRL] = { 0x41000000, 0x1000 }, [IBEX_DEV_AES] = { 0x41100000, 0x1000 }, [IBEX_DEV_HMAC] = { 0x41110000, 0x1000 }, @@ -XXX,XX +XXX,XX @@ static const MemMapEntry ibex_memmap[] = { [IBEX_DEV_ENTROPY] = { 0x41160000, 0x1000 }, [IBEX_DEV_EDNO] = { 0x41170000, 0x1000 }, [IBEX_DEV_EDN1] = { 0x41180000, 0x1000 }, - [IBEX_DEV_ALERT_HANDLER] = { 0x411b0000, 0x1000 }, [IBEX_DEV_NMI_GEN] = { 0x411c0000, 0x1000 }, [IBEX_DEV_PERI] = { 0x411f0000, 0x10000 }, - [IBEX_DEV_PLIC] = { 0x48000000, 0x4005000 }, + [IBEX_DEV_PLIC] = { 0x48000000, 0x4005000 }, [IBEX_DEV_FLASH_VIRTUAL] = { 0x80000000, 0x80000 }, }; @@ -XXX,XX +XXX,XX @@ static void lowrisc_ibex_soc_realize(DeviceState *dev_soc, Error **errp) memmap[IBEX_DEV_CLKMGR].base, memmap[IBEX_DEV_CLKMGR].size); create_unimplemented_device("riscv.lowrisc.ibex.pinmux", memmap[IBEX_DEV_PINMUX].base, memmap[IBEX_DEV_PINMUX].size); - create_unimplemented_device("riscv.lowrisc.ibex.padctrl", - memmap[IBEX_DEV_PADCTRL].base, memmap[IBEX_DEV_PADCTRL].size); create_unimplemented_device("riscv.lowrisc.ibex.usbdev", memmap[IBEX_DEV_USBDEV].base, memmap[IBEX_DEV_USBDEV].size); create_unimplemented_device("riscv.lowrisc.ibex.flash_ctrl", -- 2.38.1 From: Wilfred Mallawa <wilfred.mallawa@wdc.com> Adds the updated `aon_timer` base as an unimplemented device. This is used by TockOS, patch ensures the guest doesn't hit load faults. Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221025043335.339815-3-wilfred.mallawa@opensource.wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/riscv/opentitan.h | 1 + hw/riscv/opentitan.c | 3 +++ 2 files changed, 4 insertions(+) diff --git a/include/hw/riscv/opentitan.h b/include/hw/riscv/opentitan.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/riscv/opentitan.h +++ b/include/hw/riscv/opentitan.h @@ -XXX,XX +XXX,XX @@ enum { IBEX_DEV_RSTMGR, IBEX_DEV_CLKMGR, IBEX_DEV_PINMUX, + IBEX_DEV_AON_TIMER, IBEX_DEV_USBDEV, IBEX_DEV_FLASH_CTRL, IBEX_DEV_PLIC, diff --git a/hw/riscv/opentitan.c b/hw/riscv/opentitan.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/opentitan.c +++ b/hw/riscv/opentitan.c @@ -XXX,XX +XXX,XX @@ static const MemMapEntry ibex_memmap[] = { [IBEX_DEV_RSTMGR] = { 0x40410000, 0x1000 }, [IBEX_DEV_CLKMGR] = { 0x40420000, 0x1000 }, [IBEX_DEV_PINMUX] = { 0x40460000, 0x1000 }, + [IBEX_DEV_AON_TIMER] = { 0x40470000, 0x1000 }, [IBEX_DEV_SENSOR_CTRL] = { 0x40490000, 0x1000 }, [IBEX_DEV_FLASH_CTRL] = { 0x41000000, 0x1000 }, [IBEX_DEV_AES] = { 0x41100000, 0x1000 }, @@ -XXX,XX +XXX,XX @@ static void lowrisc_ibex_soc_realize(DeviceState *dev_soc, Error **errp) memmap[IBEX_DEV_CLKMGR].base, memmap[IBEX_DEV_CLKMGR].size); create_unimplemented_device("riscv.lowrisc.ibex.pinmux", memmap[IBEX_DEV_PINMUX].base, memmap[IBEX_DEV_PINMUX].size); + create_unimplemented_device("riscv.lowrisc.ibex.aon_timer", + memmap[IBEX_DEV_AON_TIMER].base, memmap[IBEX_DEV_AON_TIMER].size); create_unimplemented_device("riscv.lowrisc.ibex.usbdev", memmap[IBEX_DEV_USBDEV].base, memmap[IBEX_DEV_USBDEV].size); create_unimplemented_device("riscv.lowrisc.ibex.flash_ctrl", -- 2.38.1 From: Mayuresh Chitale <mchitale@ventanamicro.com> Smstateen extension specifies a mechanism to close the potential covert channels that could cause security issues. This patch adds the CSRs defined in the specification and the corresponding predicates and read/write functions. Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221016124726.102129-2-mchitale@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 4 + target/riscv/cpu_bits.h | 37 +++++ target/riscv/csr.c | 316 ++++++++++++++++++++++++++++++++++++++++ target/riscv/machine.c | 21 +++ 4 files changed, 378 insertions(+) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ struct CPUArchState { /* CSRs for execution enviornment configuration */ uint64_t menvcfg; + uint64_t mstateen[SMSTATEEN_MAX_COUNT]; + uint64_t hstateen[SMSTATEEN_MAX_COUNT]; + uint64_t sstateen[SMSTATEEN_MAX_COUNT]; target_ulong senvcfg; uint64_t henvcfg; #endif @@ -XXX,XX +XXX,XX @@ struct RISCVCPUConfig { bool ext_ifencei; bool ext_icsr; bool ext_zihintpause; + bool ext_smstateen; bool ext_sstc; bool ext_svinval; bool ext_svnapot; diff --git a/target/riscv/cpu_bits.h b/target/riscv/cpu_bits.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_bits.h +++ b/target/riscv/cpu_bits.h @@ -XXX,XX +XXX,XX @@ /* Supervisor Configuration CSRs */ #define CSR_SENVCFG 0x10A +/* Supervisor state CSRs */ +#define CSR_SSTATEEN0 0x10C +#define CSR_SSTATEEN1 0x10D +#define CSR_SSTATEEN2 0x10E +#define CSR_SSTATEEN3 0x10F + /* Supervisor Trap Handling */ #define CSR_SSCRATCH 0x140 #define CSR_SEPC 0x141 @@ -XXX,XX +XXX,XX @@ #define CSR_HENVCFG 0x60A #define CSR_HENVCFGH 0x61A +/* Hypervisor state CSRs */ +#define CSR_HSTATEEN0 0x60C +#define CSR_HSTATEEN0H 0x61C +#define CSR_HSTATEEN1 0x60D +#define CSR_HSTATEEN1H 0x61D +#define CSR_HSTATEEN2 0x60E +#define CSR_HSTATEEN2H 0x61E +#define CSR_HSTATEEN3 0x60F +#define CSR_HSTATEEN3H 0x61F + /* Virtual CSRs */ #define CSR_VSSTATUS 0x200 #define CSR_VSIE 0x204 @@ -XXX,XX +XXX,XX @@ #define CSR_MENVCFG 0x30A #define CSR_MENVCFGH 0x31A +/* Machine state CSRs */ +#define CSR_MSTATEEN0 0x30C +#define CSR_MSTATEEN0H 0x31C +#define CSR_MSTATEEN1 0x30D +#define CSR_MSTATEEN1H 0x31D +#define CSR_MSTATEEN2 0x30E +#define CSR_MSTATEEN2H 0x31E +#define CSR_MSTATEEN3 0x30F +#define CSR_MSTATEEN3H 0x31F + +/* Common defines for all smstateen */ +#define SMSTATEEN_MAX_COUNT 4 +#define SMSTATEEN0_CS (1ULL << 0) +#define SMSTATEEN0_FCSR (1ULL << 1) +#define SMSTATEEN0_HSCONTXT (1ULL << 57) +#define SMSTATEEN0_IMSIC (1ULL << 58) +#define SMSTATEEN0_AIA (1ULL << 59) +#define SMSTATEEN0_SVSLCT (1ULL << 60) +#define SMSTATEEN0_HSENVCFG (1ULL << 62) +#define SMSTATEEN_STATEEN (1ULL << 63) + /* Enhanced Physical Memory Protection (ePMP) */ #define CSR_MSECCFG 0x747 #define CSR_MSECCFGH 0x757 diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException umode32(CPURISCVState *env, int csrno) return umode(env, csrno); } +static RISCVException mstateen(CPURISCVState *env, int csrno) +{ + CPUState *cs = env_cpu(env); + RISCVCPU *cpu = RISCV_CPU(cs); + + if (!cpu->cfg.ext_smstateen) { + return RISCV_EXCP_ILLEGAL_INST; + } + + return any(env, csrno); +} + +static RISCVException hstateen_pred(CPURISCVState *env, int csrno, int base) +{ + CPUState *cs = env_cpu(env); + RISCVCPU *cpu = RISCV_CPU(cs); + + if (!cpu->cfg.ext_smstateen) { + return RISCV_EXCP_ILLEGAL_INST; + } + + if (env->priv < PRV_M) { + if (!(env->mstateen[csrno - base] & SMSTATEEN_STATEEN)) { + return RISCV_EXCP_ILLEGAL_INST; + } + } + + return hmode(env, csrno); +} + +static RISCVException hstateen(CPURISCVState *env, int csrno) +{ + return hstateen_pred(env, csrno, CSR_HSTATEEN0); +} + +static RISCVException hstateenh(CPURISCVState *env, int csrno) +{ + return hstateen_pred(env, csrno, CSR_HSTATEEN0H); +} + +static RISCVException sstateen(CPURISCVState *env, int csrno) +{ + bool virt = riscv_cpu_virt_enabled(env); + int index = csrno - CSR_SSTATEEN0; + CPUState *cs = env_cpu(env); + RISCVCPU *cpu = RISCV_CPU(cs); + + if (!cpu->cfg.ext_smstateen) { + return RISCV_EXCP_ILLEGAL_INST; + } + + if (env->priv < PRV_M) { + if (!(env->mstateen[index] & SMSTATEEN_STATEEN)) { + return RISCV_EXCP_ILLEGAL_INST; + } + + if (virt) { + if (!(env->hstateen[index] & SMSTATEEN_STATEEN)) { + return RISCV_EXCP_VIRT_INSTRUCTION_FAULT; + } + } + } + + return smode(env, csrno); +} + /* Checks if PointerMasking registers could be accessed */ static RISCVException pointer_masking(CPURISCVState *env, int csrno) { @@ -XXX,XX +XXX,XX @@ static RISCVException write_henvcfgh(CPURISCVState *env, int csrno, return RISCV_EXCP_NONE; } +static RISCVException read_mstateen(CPURISCVState *env, int csrno, + target_ulong *val) +{ + *val = env->mstateen[csrno - CSR_MSTATEEN0]; + + return RISCV_EXCP_NONE; +} + +static RISCVException write_mstateen(CPURISCVState *env, int csrno, + uint64_t wr_mask, target_ulong new_val) +{ + uint64_t *reg; + + reg = &env->mstateen[csrno - CSR_MSTATEEN0]; + *reg = (*reg & ~wr_mask) | (new_val & wr_mask); + + return RISCV_EXCP_NONE; +} + +static RISCVException write_mstateen0(CPURISCVState *env, int csrno, + target_ulong new_val) +{ + uint64_t wr_mask = SMSTATEEN_STATEEN; + + return write_mstateen(env, csrno, wr_mask, new_val); +} + +static RISCVException write_mstateen_1_3(CPURISCVState *env, int csrno, + target_ulong new_val) +{ + return write_mstateen(env, csrno, SMSTATEEN_STATEEN, new_val); +} + +static RISCVException read_mstateenh(CPURISCVState *env, int csrno, + target_ulong *val) +{ + *val = env->mstateen[csrno - CSR_MSTATEEN0H] >> 32; + + return RISCV_EXCP_NONE; +} + +static RISCVException write_mstateenh(CPURISCVState *env, int csrno, + uint64_t wr_mask, target_ulong new_val) +{ + uint64_t *reg, val; + + reg = &env->mstateen[csrno - CSR_MSTATEEN0H]; + val = (uint64_t)new_val << 32; + val |= *reg & 0xFFFFFFFF; + *reg = (*reg & ~wr_mask) | (val & wr_mask); + + return RISCV_EXCP_NONE; +} + +static RISCVException write_mstateen0h(CPURISCVState *env, int csrno, + target_ulong new_val) +{ + uint64_t wr_mask = SMSTATEEN_STATEEN; + + return write_mstateenh(env, csrno, wr_mask, new_val); +} + +static RISCVException write_mstateenh_1_3(CPURISCVState *env, int csrno, + target_ulong new_val) +{ + return write_mstateenh(env, csrno, SMSTATEEN_STATEEN, new_val); +} + +static RISCVException read_hstateen(CPURISCVState *env, int csrno, + target_ulong *val) +{ + int index = csrno - CSR_HSTATEEN0; + + *val = env->hstateen[index] & env->mstateen[index]; + + return RISCV_EXCP_NONE; +} + +static RISCVException write_hstateen(CPURISCVState *env, int csrno, + uint64_t mask, target_ulong new_val) +{ + int index = csrno - CSR_HSTATEEN0; + uint64_t *reg, wr_mask; + + reg = &env->hstateen[index]; + wr_mask = env->mstateen[index] & mask; + *reg = (*reg & ~wr_mask) | (new_val & wr_mask); + + return RISCV_EXCP_NONE; +} + +static RISCVException write_hstateen0(CPURISCVState *env, int csrno, + target_ulong new_val) +{ + uint64_t wr_mask = SMSTATEEN_STATEEN; + + return write_hstateen(env, csrno, wr_mask, new_val); +} + +static RISCVException write_hstateen_1_3(CPURISCVState *env, int csrno, + target_ulong new_val) +{ + return write_hstateen(env, csrno, SMSTATEEN_STATEEN, new_val); +} + +static RISCVException read_hstateenh(CPURISCVState *env, int csrno, + target_ulong *val) +{ + int index = csrno - CSR_HSTATEEN0H; + + *val = (env->hstateen[index] >> 32) & (env->mstateen[index] >> 32); + + return RISCV_EXCP_NONE; +} + +static RISCVException write_hstateenh(CPURISCVState *env, int csrno, + uint64_t mask, target_ulong new_val) +{ + int index = csrno - CSR_HSTATEEN0H; + uint64_t *reg, wr_mask, val; + + reg = &env->hstateen[index]; + val = (uint64_t)new_val << 32; + val |= *reg & 0xFFFFFFFF; + wr_mask = env->mstateen[index] & mask; + *reg = (*reg & ~wr_mask) | (val & wr_mask); + + return RISCV_EXCP_NONE; +} + +static RISCVException write_hstateen0h(CPURISCVState *env, int csrno, + target_ulong new_val) +{ + uint64_t wr_mask = SMSTATEEN_STATEEN; + + return write_hstateenh(env, csrno, wr_mask, new_val); +} + +static RISCVException write_hstateenh_1_3(CPURISCVState *env, int csrno, + target_ulong new_val) +{ + return write_hstateenh(env, csrno, SMSTATEEN_STATEEN, new_val); +} + +static RISCVException read_sstateen(CPURISCVState *env, int csrno, + target_ulong *val) +{ + bool virt = riscv_cpu_virt_enabled(env); + int index = csrno - CSR_SSTATEEN0; + + *val = env->sstateen[index] & env->mstateen[index]; + if (virt) { + *val &= env->hstateen[index]; + } + + return RISCV_EXCP_NONE; +} + +static RISCVException write_sstateen(CPURISCVState *env, int csrno, + uint64_t mask, target_ulong new_val) +{ + bool virt = riscv_cpu_virt_enabled(env); + int index = csrno - CSR_SSTATEEN0; + uint64_t wr_mask; + uint64_t *reg; + + wr_mask = env->mstateen[index] & mask; + if (virt) { + wr_mask &= env->hstateen[index]; + } + + reg = &env->sstateen[index]; + *reg = (*reg & ~wr_mask) | (new_val & wr_mask); + + return RISCV_EXCP_NONE; +} + +static RISCVException write_sstateen0(CPURISCVState *env, int csrno, + target_ulong new_val) +{ + uint64_t wr_mask = SMSTATEEN_STATEEN; + + return write_sstateen(env, csrno, wr_mask, new_val); +} + +static RISCVException write_sstateen_1_3(CPURISCVState *env, int csrno, + target_ulong new_val) +{ + return write_sstateen(env, csrno, SMSTATEEN_STATEEN, new_val); +} + static RISCVException rmw_mip64(CPURISCVState *env, int csrno, uint64_t *ret_val, uint64_t new_val, uint64_t wr_mask) @@ -XXX,XX +XXX,XX @@ riscv_csr_operations csr_ops[CSR_TABLE_SIZE] = { [CSR_HENVCFGH] = { "henvcfgh", hmode32, read_henvcfgh, write_henvcfgh, .min_priv_ver = PRIV_VERSION_1_12_0 }, + /* Smstateen extension CSRs */ + [CSR_MSTATEEN0] = { "mstateen0", mstateen, read_mstateen, write_mstateen0, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_MSTATEEN0H] = { "mstateen0h", mstateen, read_mstateenh, + write_mstateen0h, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_MSTATEEN1] = { "mstateen1", mstateen, read_mstateen, + write_mstateen_1_3, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_MSTATEEN1H] = { "mstateen1h", mstateen, read_mstateenh, + write_mstateenh_1_3, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_MSTATEEN2] = { "mstateen2", mstateen, read_mstateen, + write_mstateen_1_3, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_MSTATEEN2H] = { "mstateen2h", mstateen, read_mstateenh, + write_mstateenh_1_3, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_MSTATEEN3] = { "mstateen3", mstateen, read_mstateen, + write_mstateen_1_3, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_MSTATEEN3H] = { "mstateen3h", mstateen, read_mstateenh, + write_mstateenh_1_3, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_HSTATEEN0] = { "hstateen0", hstateen, read_hstateen, write_hstateen0, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_HSTATEEN0H] = { "hstateen0h", hstateenh, read_hstateenh, + write_hstateen0h, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_HSTATEEN1] = { "hstateen1", hstateen, read_hstateen, + write_hstateen_1_3, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_HSTATEEN1H] = { "hstateen1h", hstateenh, read_hstateenh, + write_hstateenh_1_3, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_HSTATEEN2] = { "hstateen2", hstateen, read_hstateen, + write_hstateen_1_3, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_HSTATEEN2H] = { "hstateen2h", hstateenh, read_hstateenh, + write_hstateenh_1_3, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_HSTATEEN3] = { "hstateen3", hstateen, read_hstateen, + write_hstateen_1_3, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_HSTATEEN3H] = { "hstateen3h", hstateenh, read_hstateenh, + write_hstateenh_1_3, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_SSTATEEN0] = { "sstateen0", sstateen, read_sstateen, write_sstateen0, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_SSTATEEN1] = { "sstateen1", sstateen, read_sstateen, + write_sstateen_1_3, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_SSTATEEN2] = { "sstateen2", sstateen, read_sstateen, + write_sstateen_1_3, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_SSTATEEN3] = { "sstateen3", sstateen, read_sstateen, + write_sstateen_1_3, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + /* Supervisor Trap Setup */ [CSR_SSTATUS] = { "sstatus", smode, read_sstatus, write_sstatus, NULL, read_sstatus_i128 }, diff --git a/target/riscv/machine.c b/target/riscv/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/machine.c +++ b/target/riscv/machine.c @@ -XXX,XX +XXX,XX @@ static int riscv_cpu_post_load(void *opaque, int version_id) return 0; } +static bool smstateen_needed(void *opaque) +{ + RISCVCPU *cpu = opaque; + + return cpu->cfg.ext_smstateen; +} + +static const VMStateDescription vmstate_smstateen = { + .name = "cpu/smtateen", + .version_id = 1, + .minimum_version_id = 1, + .needed = smstateen_needed, + .fields = (VMStateField[]) { + VMSTATE_UINT64_ARRAY(env.mstateen, RISCVCPU, 4), + VMSTATE_UINT64_ARRAY(env.hstateen, RISCVCPU, 4), + VMSTATE_UINT64_ARRAY(env.sstateen, RISCVCPU, 4), + VMSTATE_END_OF_LIST() + } +}; + static bool envcfg_needed(void *opaque) { RISCVCPU *cpu = opaque; @@ -XXX,XX +XXX,XX @@ const VMStateDescription vmstate_riscv_cpu = { &vmstate_kvmtimer, &vmstate_envcfg, &vmstate_debug, + &vmstate_smstateen, NULL } }; -- 2.38.1 From: Mayuresh Chitale <mchitale@ventanamicro.com> Accesses to henvcfg, henvcfgh and senvcfg are allowed only if the corresponding bit in mstateen0/hstateen0 is enabled. Otherwise an illegal instruction trap is generated. Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com> Reviewed-by: Weiwei Li<liweiwei@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221016124726.102129-3-mchitale@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 87 ++++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 80 insertions(+), 7 deletions(-) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ void riscv_set_csr_ops(int csrno, riscv_csr_operations *ops) } /* Predicates */ +#if !defined(CONFIG_USER_ONLY) +static RISCVException smstateen_acc_ok(CPURISCVState *env, int index, + uint64_t bit) +{ + bool virt = riscv_cpu_virt_enabled(env); + CPUState *cs = env_cpu(env); + RISCVCPU *cpu = RISCV_CPU(cs); + + if (env->priv == PRV_M || !cpu->cfg.ext_smstateen) { + return RISCV_EXCP_NONE; + } + + if (!(env->mstateen[index] & bit)) { + return RISCV_EXCP_ILLEGAL_INST; + } + + if (virt) { + if (!(env->hstateen[index] & bit)) { + return RISCV_EXCP_VIRT_INSTRUCTION_FAULT; + } + + if (env->priv == PRV_U && !(env->sstateen[index] & bit)) { + return RISCV_EXCP_VIRT_INSTRUCTION_FAULT; + } + } + + if (env->priv == PRV_U && riscv_has_ext(env, RVS)) { + if (!(env->sstateen[index] & bit)) { + return RISCV_EXCP_ILLEGAL_INST; + } + } + + return RISCV_EXCP_NONE; +} +#endif + static RISCVException fs(CPURISCVState *env, int csrno) { #if !defined(CONFIG_USER_ONLY) @@ -XXX,XX +XXX,XX @@ static RISCVException write_menvcfgh(CPURISCVState *env, int csrno, static RISCVException read_senvcfg(CPURISCVState *env, int csrno, target_ulong *val) { + RISCVException ret; + + ret = smstateen_acc_ok(env, 0, SMSTATEEN0_HSENVCFG); + if (ret != RISCV_EXCP_NONE) { + return ret; + } + *val = env->senvcfg; return RISCV_EXCP_NONE; } @@ -XXX,XX +XXX,XX @@ static RISCVException write_senvcfg(CPURISCVState *env, int csrno, target_ulong val) { uint64_t mask = SENVCFG_FIOM | SENVCFG_CBIE | SENVCFG_CBCFE | SENVCFG_CBZE; + RISCVException ret; - env->senvcfg = (env->senvcfg & ~mask) | (val & mask); + ret = smstateen_acc_ok(env, 0, SMSTATEEN0_HSENVCFG); + if (ret != RISCV_EXCP_NONE) { + return ret; + } + env->senvcfg = (env->senvcfg & ~mask) | (val & mask); return RISCV_EXCP_NONE; } static RISCVException read_henvcfg(CPURISCVState *env, int csrno, target_ulong *val) { + RISCVException ret; + + ret = smstateen_acc_ok(env, 0, SMSTATEEN0_HSENVCFG); + if (ret != RISCV_EXCP_NONE) { + return ret; + } + *val = env->henvcfg; return RISCV_EXCP_NONE; } @@ -XXX,XX +XXX,XX @@ static RISCVException write_henvcfg(CPURISCVState *env, int csrno, target_ulong val) { uint64_t mask = HENVCFG_FIOM | HENVCFG_CBIE | HENVCFG_CBCFE | HENVCFG_CBZE; + RISCVException ret; + + ret = smstateen_acc_ok(env, 0, SMSTATEEN0_HSENVCFG); + if (ret != RISCV_EXCP_NONE) { + return ret; + } if (riscv_cpu_mxl(env) == MXL_RV64) { mask |= HENVCFG_PBMTE | HENVCFG_STCE; @@ -XXX,XX +XXX,XX @@ static RISCVException write_henvcfg(CPURISCVState *env, int csrno, static RISCVException read_henvcfgh(CPURISCVState *env, int csrno, target_ulong *val) { + RISCVException ret; + + ret = smstateen_acc_ok(env, 0, SMSTATEEN0_HSENVCFG); + if (ret != RISCV_EXCP_NONE) { + return ret; + } + *val = env->henvcfg >> 32; return RISCV_EXCP_NONE; } @@ -XXX,XX +XXX,XX @@ static RISCVException write_henvcfgh(CPURISCVState *env, int csrno, { uint64_t mask = HENVCFG_PBMTE | HENVCFG_STCE; uint64_t valh = (uint64_t)val << 32; + RISCVException ret; - env->henvcfg = (env->henvcfg & ~mask) | (valh & mask); + ret = smstateen_acc_ok(env, 0, SMSTATEEN0_HSENVCFG); + if (ret != RISCV_EXCP_NONE) { + return ret; + } + env->henvcfg = (env->henvcfg & ~mask) | (valh & mask); return RISCV_EXCP_NONE; } @@ -XXX,XX +XXX,XX @@ static RISCVException write_mstateen(CPURISCVState *env, int csrno, static RISCVException write_mstateen0(CPURISCVState *env, int csrno, target_ulong new_val) { - uint64_t wr_mask = SMSTATEEN_STATEEN; + uint64_t wr_mask = SMSTATEEN_STATEEN | SMSTATEEN0_HSENVCFG; return write_mstateen(env, csrno, wr_mask, new_val); } @@ -XXX,XX +XXX,XX @@ static RISCVException write_mstateenh(CPURISCVState *env, int csrno, static RISCVException write_mstateen0h(CPURISCVState *env, int csrno, target_ulong new_val) { - uint64_t wr_mask = SMSTATEEN_STATEEN; + uint64_t wr_mask = SMSTATEEN_STATEEN | SMSTATEEN0_HSENVCFG; return write_mstateenh(env, csrno, wr_mask, new_val); } @@ -XXX,XX +XXX,XX @@ static RISCVException write_hstateen(CPURISCVState *env, int csrno, static RISCVException write_hstateen0(CPURISCVState *env, int csrno, target_ulong new_val) { - uint64_t wr_mask = SMSTATEEN_STATEEN; + uint64_t wr_mask = SMSTATEEN_STATEEN | SMSTATEEN0_HSENVCFG; return write_hstateen(env, csrno, wr_mask, new_val); } @@ -XXX,XX +XXX,XX @@ static RISCVException write_hstateenh(CPURISCVState *env, int csrno, static RISCVException write_hstateen0h(CPURISCVState *env, int csrno, target_ulong new_val) { - uint64_t wr_mask = SMSTATEEN_STATEEN; + uint64_t wr_mask = SMSTATEEN_STATEEN | SMSTATEEN0_HSENVCFG; return write_hstateenh(env, csrno, wr_mask, new_val); } @@ -XXX,XX +XXX,XX @@ static RISCVException write_sstateen(CPURISCVState *env, int csrno, static RISCVException write_sstateen0(CPURISCVState *env, int csrno, target_ulong new_val) { - uint64_t wr_mask = SMSTATEEN_STATEEN; + uint64_t wr_mask = SMSTATEEN_STATEEN | SMSTATEEN0_HSENVCFG; return write_sstateen(env, csrno, wr_mask, new_val); } -- 2.38.1 From: Mayuresh Chitale <mchitale@ventanamicro.com> This patch adds a mechanism to generate a virtual instruction instruction exception instead of an illegal instruction exception during instruction decode when virt is enabled. Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221016124726.102129-4-mchitale@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/translate.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/target/riscv/translate.c b/target/riscv/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/translate.c +++ b/target/riscv/translate.c @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { to reset this known value. */ int frm; RISCVMXL ol; + bool virt_inst_excp; bool virt_enabled; const RISCVCPUConfig *cfg_ptr; bool hlsx; @@ -XXX,XX +XXX,XX @@ static void gen_exception_illegal(DisasContext *ctx) { tcg_gen_st_i32(tcg_constant_i32(ctx->opcode), cpu_env, offsetof(CPURISCVState, bins)); - generate_exception(ctx, RISCV_EXCP_ILLEGAL_INST); + if (ctx->virt_inst_excp) { + generate_exception(ctx, RISCV_EXCP_VIRT_INSTRUCTION_FAULT); + } else { + generate_exception(ctx, RISCV_EXCP_ILLEGAL_INST); + } } static void gen_exception_inst_addr_mis(DisasContext *ctx) @@ -XXX,XX +XXX,XX @@ static void decode_opc(CPURISCVState *env, DisasContext *ctx, uint16_t opcode) { has_XVentanaCondOps_p, decode_XVentanaCodeOps }, }; + ctx->virt_inst_excp = false; /* Check for compressed insn */ if (insn_len(opcode) == 2) { if (!has_ext(ctx, RVC)) { -- 2.38.1 From: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> When icount is not enabled, there is no API in QEMU that can get the guest instruction number. Translate the guest code in a way that each TB only has one instruction. After executing the instruction, decrease the count by 1 until it reaches 0 where the itrigger fires. Note that only when priviledge matches the itrigger configuration, the count will decrease. Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221013062946.7530-2-zhiwei_liu@linux.alibaba.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 2 + target/riscv/debug.h | 12 ++++ target/riscv/helper.h | 2 + target/riscv/cpu_helper.c | 6 ++ target/riscv/debug.c | 71 +++++++++++++++++++ target/riscv/translate.c | 33 ++++++++- .../riscv/insn_trans/trans_privileged.c.inc | 4 +- target/riscv/insn_trans/trans_rvi.c.inc | 8 +-- target/riscv/insn_trans/trans_rvv.c.inc | 4 +- 9 files changed, 131 insertions(+), 11 deletions(-) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TB_FLAGS, PM_MASK_ENABLED, 22, 1) FIELD(TB_FLAGS, PM_BASE_ENABLED, 23, 1) FIELD(TB_FLAGS, VTA, 24, 1) FIELD(TB_FLAGS, VMA, 25, 1) +/* Native debug itrigger */ +FIELD(TB_FLAGS, ITRIGGER, 26, 1) #ifdef TARGET_RISCV32 #define riscv_cpu_mxl(env) ((void)(env), MXL_RV32) diff --git a/target/riscv/debug.h b/target/riscv/debug.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/debug.h +++ b/target/riscv/debug.h @@ -XXX,XX +XXX,XX @@ enum { SIZE_NUM = 16 }; +/* itrigger filed masks */ +#define ITRIGGER_ACTION 0x3f +#define ITRIGGER_U BIT(6) +#define ITRIGGER_S BIT(7) +#define ITRIGGER_PENDING BIT(8) +#define ITRIGGER_M BIT(9) +#define ITRIGGER_COUNT (0x3fff << 10) +#define ITRIGGER_HIT BIT(24) +#define ITRIGGER_VU BIT(25) +#define ITRIGGER_VS BIT(26) + bool tdata_available(CPURISCVState *env, int tdata_index); target_ulong tselect_csr_read(CPURISCVState *env); @@ -XXX,XX +XXX,XX @@ bool riscv_cpu_debug_check_watchpoint(CPUState *cs, CPUWatchpoint *wp); void riscv_trigger_init(CPURISCVState *env); +bool riscv_itrigger_enabled(CPURISCVState *env); #endif /* RISCV_DEBUG_H */ diff --git a/target/riscv/helper.h b/target/riscv/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/helper.h +++ b/target/riscv/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_1(sret, tl, env) DEF_HELPER_1(mret, tl, env) DEF_HELPER_1(wfi, void, env) DEF_HELPER_1(tlb_flush, void, env) +/* Native Debug */ +DEF_HELPER_1(itrigger_match, void, env) #endif /* Hypervisor functions */ diff --git a/target/riscv/cpu_helper.c b/target/riscv/cpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_helper.c +++ b/target/riscv/cpu_helper.c @@ -XXX,XX +XXX,XX @@ #include "tcg/tcg-op.h" #include "trace.h" #include "semihosting/common-semi.h" +#include "sysemu/cpu-timers.h" #include "cpu_bits.h" +#include "debug.h" int riscv_cpu_mmu_index(CPURISCVState *env, bool ifetch) { @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPURISCVState *env, target_ulong *pc, flags = FIELD_DP32(flags, TB_FLAGS, MSTATUS_HS_VS, get_field(env->mstatus_hs, MSTATUS_VS)); } + if (riscv_feature(env, RISCV_FEATURE_DEBUG) && !icount_enabled()) { + flags = FIELD_DP32(flags, TB_FLAGS, ITRIGGER, + riscv_itrigger_enabled(env)); + } #endif flags = FIELD_DP32(flags, TB_FLAGS, XL, env->xl); diff --git a/target/riscv/debug.c b/target/riscv/debug.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/debug.c +++ b/target/riscv/debug.c @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "trace.h" #include "exec/exec-all.h" +#include "exec/helper-proto.h" /* * The following M-mode trigger CSRs are implemented: @@ -XXX,XX +XXX,XX @@ static void type6_reg_write(CPURISCVState *env, target_ulong index, return; } +/* icount trigger type */ +static inline int +itrigger_get_count(CPURISCVState *env, int index) +{ + return get_field(env->tdata1[index], ITRIGGER_COUNT); +} + +static inline void +itrigger_set_count(CPURISCVState *env, int index, int value) +{ + env->tdata1[index] = set_field(env->tdata1[index], + ITRIGGER_COUNT, value); +} + +static bool check_itrigger_priv(CPURISCVState *env, int index) +{ + target_ulong tdata1 = env->tdata1[index]; + if (riscv_cpu_virt_enabled(env)) { + /* check VU/VS bit against current privilege level */ + return (get_field(tdata1, ITRIGGER_VS) == env->priv) || + (get_field(tdata1, ITRIGGER_VU) == env->priv); + } else { + /* check U/S/M bit against current privilege level */ + return (get_field(tdata1, ITRIGGER_M) == env->priv) || + (get_field(tdata1, ITRIGGER_S) == env->priv) || + (get_field(tdata1, ITRIGGER_U) == env->priv); + } +} + +bool riscv_itrigger_enabled(CPURISCVState *env) +{ + int count; + for (int i = 0; i < RV_MAX_TRIGGERS; i++) { + if (get_trigger_type(env, i) != TRIGGER_TYPE_INST_CNT) { + continue; + } + if (check_itrigger_priv(env, i)) { + continue; + } + count = itrigger_get_count(env, i); + if (!count) { + continue; + } + return true; + } + + return false; +} + +void helper_itrigger_match(CPURISCVState *env) +{ + int count; + for (int i = 0; i < RV_MAX_TRIGGERS; i++) { + if (get_trigger_type(env, i) != TRIGGER_TYPE_INST_CNT) { + continue; + } + if (check_itrigger_priv(env, i)) { + continue; + } + count = itrigger_get_count(env, i); + if (!count) { + continue; + } + itrigger_set_count(env, i, count--); + if (!count) { + do_trigger_action(env, i); + } + } +} + target_ulong tdata_csr_read(CPURISCVState *env, int tdata_index) { switch (tdata_index) { diff --git a/target/riscv/translate.c b/target/riscv/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/translate.c +++ b/target/riscv/translate.c @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { /* PointerMasking extension */ bool pm_mask_enabled; bool pm_base_enabled; + /* Use icount trigger for native debug */ + bool itrigger; /* TCG of the current insn_start */ TCGOp *insn_start; } DisasContext; @@ -XXX,XX +XXX,XX @@ static void gen_exception_inst_addr_mis(DisasContext *ctx) generate_exception(ctx, RISCV_EXCP_INST_ADDR_MIS); } +static void lookup_and_goto_ptr(DisasContext *ctx) +{ +#ifndef CONFIG_USER_ONLY + if (ctx->itrigger) { + gen_helper_itrigger_match(cpu_env); + } +#endif + tcg_gen_lookup_and_goto_ptr(); +} + +static void exit_tb(DisasContext *ctx) +{ +#ifndef CONFIG_USER_ONLY + if (ctx->itrigger) { + gen_helper_itrigger_match(cpu_env); + } +#endif + tcg_gen_exit_tb(NULL, 0); +} + static void gen_goto_tb(DisasContext *ctx, int n, target_ulong dest) { - if (translator_use_goto_tb(&ctx->base, dest)) { + /* + * Under itrigger, instruction executes one by one like singlestep, + * direct block chain benefits will be small. + */ + if (translator_use_goto_tb(&ctx->base, dest) && !ctx->itrigger) { tcg_gen_goto_tb(n); gen_set_pc_imm(ctx, dest); tcg_gen_exit_tb(ctx->base.tb, n); } else { gen_set_pc_imm(ctx, dest); - tcg_gen_lookup_and_goto_ptr(); + lookup_and_goto_ptr(ctx); } } @@ -XXX,XX +XXX,XX @@ static void riscv_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) memset(ctx->ftemp, 0, sizeof(ctx->ftemp)); ctx->pm_mask_enabled = FIELD_EX32(tb_flags, TB_FLAGS, PM_MASK_ENABLED); ctx->pm_base_enabled = FIELD_EX32(tb_flags, TB_FLAGS, PM_BASE_ENABLED); + ctx->itrigger = FIELD_EX32(tb_flags, TB_FLAGS, ITRIGGER); ctx->zero = tcg_constant_tl(0); } @@ -XXX,XX +XXX,XX @@ static void riscv_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) /* Only the first insn within a TB is allowed to cross a page boundary. */ if (ctx->base.is_jmp == DISAS_NEXT) { - if (!is_same_page(&ctx->base, ctx->base.pc_next)) { + if (ctx->itrigger || !is_same_page(&ctx->base, ctx->base.pc_next)) { ctx->base.is_jmp = DISAS_TOO_MANY; } else { unsigned page_ofs = ctx->base.pc_next & ~TARGET_PAGE_MASK; diff --git a/target/riscv/insn_trans/trans_privileged.c.inc b/target/riscv/insn_trans/trans_privileged.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_privileged.c.inc +++ b/target/riscv/insn_trans/trans_privileged.c.inc @@ -XXX,XX +XXX,XX @@ static bool trans_sret(DisasContext *ctx, arg_sret *a) if (has_ext(ctx, RVS)) { decode_save_opc(ctx); gen_helper_sret(cpu_pc, cpu_env); - tcg_gen_exit_tb(NULL, 0); /* no chaining */ + exit_tb(ctx); /* no chaining */ ctx->base.is_jmp = DISAS_NORETURN; } else { return false; @@ -XXX,XX +XXX,XX @@ static bool trans_mret(DisasContext *ctx, arg_mret *a) #ifndef CONFIG_USER_ONLY decode_save_opc(ctx); gen_helper_mret(cpu_pc, cpu_env); - tcg_gen_exit_tb(NULL, 0); /* no chaining */ + exit_tb(ctx); /* no chaining */ ctx->base.is_jmp = DISAS_NORETURN; return true; #else diff --git a/target/riscv/insn_trans/trans_rvi.c.inc b/target/riscv/insn_trans/trans_rvi.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_rvi.c.inc +++ b/target/riscv/insn_trans/trans_rvi.c.inc @@ -XXX,XX +XXX,XX @@ static bool trans_jalr(DisasContext *ctx, arg_jalr *a) } gen_set_gpri(ctx, a->rd, ctx->pc_succ_insn); - tcg_gen_lookup_and_goto_ptr(); + lookup_and_goto_ptr(ctx); if (misaligned) { gen_set_label(misaligned); @@ -XXX,XX +XXX,XX @@ static bool trans_pause(DisasContext *ctx, arg_pause *a) * end the TB and return to main loop */ gen_set_pc_imm(ctx, ctx->pc_succ_insn); - tcg_gen_exit_tb(NULL, 0); + exit_tb(ctx); ctx->base.is_jmp = DISAS_NORETURN; return true; @@ -XXX,XX +XXX,XX @@ static bool trans_fence_i(DisasContext *ctx, arg_fence_i *a) * however we need to end the translation block */ gen_set_pc_imm(ctx, ctx->pc_succ_insn); - tcg_gen_exit_tb(NULL, 0); + exit_tb(ctx); ctx->base.is_jmp = DISAS_NORETURN; return true; } @@ -XXX,XX +XXX,XX @@ static bool do_csr_post(DisasContext *ctx) decode_save_opc(ctx); /* We may have changed important cpu state -- exit to main loop. */ gen_set_pc_imm(ctx, ctx->pc_succ_insn); - tcg_gen_exit_tb(NULL, 0); + exit_tb(ctx); ctx->base.is_jmp = DISAS_NORETURN; return true; } diff --git a/target/riscv/insn_trans/trans_rvv.c.inc b/target/riscv/insn_trans/trans_rvv.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_rvv.c.inc +++ b/target/riscv/insn_trans/trans_rvv.c.inc @@ -XXX,XX +XXX,XX @@ static bool do_vsetvl(DisasContext *s, int rd, int rs1, TCGv s2) mark_vs_dirty(s); gen_set_pc_imm(s, s->pc_succ_insn); - tcg_gen_lookup_and_goto_ptr(); + lookup_and_goto_ptr(s); s->base.is_jmp = DISAS_NORETURN; if (rd == 0 && rs1 == 0) { @@ -XXX,XX +XXX,XX @@ static bool do_vsetivli(DisasContext *s, int rd, TCGv s1, TCGv s2) gen_set_gpr(s, rd, dst); mark_vs_dirty(s); gen_set_pc_imm(s, s->pc_succ_insn); - tcg_gen_lookup_and_goto_ptr(); + lookup_and_goto_ptr(s); s->base.is_jmp = DISAS_NORETURN; return true; -- 2.38.1 From: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> The max count in itrigger can be 0x3FFF, which will cause a no trivial translation and execution overload. When icount is enabled, QEMU provides API that can fetch guest instruction number. Thus, we can set an timer for itrigger with the count as deadline. Only when timer expires or priviledge mode changes, do lazy update to count. Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221013062946.7530-3-zhiwei_liu@linux.alibaba.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 2 ++ target/riscv/debug.h | 1 + target/riscv/cpu_helper.c | 3 ++ target/riscv/debug.c | 59 +++++++++++++++++++++++++++++++++++++++ 4 files changed, 65 insertions(+) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ struct CPUArchState { target_ulong tdata3[RV_MAX_TRIGGERS]; struct CPUBreakpoint *cpu_breakpoint[RV_MAX_TRIGGERS]; struct CPUWatchpoint *cpu_watchpoint[RV_MAX_TRIGGERS]; + QEMUTimer *itrigger_timer[RV_MAX_TRIGGERS]; + int64_t last_icount; /* machine specific rdtime callback */ uint64_t (*rdtime_fn)(void *); diff --git a/target/riscv/debug.h b/target/riscv/debug.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/debug.h +++ b/target/riscv/debug.h @@ -XXX,XX +XXX,XX @@ bool riscv_cpu_debug_check_watchpoint(CPUState *cs, CPUWatchpoint *wp); void riscv_trigger_init(CPURISCVState *env); bool riscv_itrigger_enabled(CPURISCVState *env); +void riscv_itrigger_update_priv(CPURISCVState *env); #endif /* RISCV_DEBUG_H */ diff --git a/target/riscv/cpu_helper.c b/target/riscv/cpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_helper.c +++ b/target/riscv/cpu_helper.c @@ -XXX,XX +XXX,XX @@ void riscv_cpu_set_mode(CPURISCVState *env, target_ulong newpriv) if (newpriv == PRV_H) { newpriv = PRV_U; } + if (icount_enabled() && newpriv != env->priv) { + riscv_itrigger_update_priv(env); + } /* tlb_flush is unnecessary as mode is contained in mmu_idx */ env->priv = newpriv; env->xl = cpu_recompute_xl(env); diff --git a/target/riscv/debug.c b/target/riscv/debug.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/debug.c +++ b/target/riscv/debug.c @@ -XXX,XX +XXX,XX @@ #include "trace.h" #include "exec/exec-all.h" #include "exec/helper-proto.h" +#include "sysemu/cpu-timers.h" /* * The following M-mode trigger CSRs are implemented: @@ -XXX,XX +XXX,XX @@ void helper_itrigger_match(CPURISCVState *env) } } +static void riscv_itrigger_update_count(CPURISCVState *env) +{ + int count, executed; + /* + * Record last icount, so that we can evaluate the executed instructions + * since last priviledge mode change or timer expire. + */ + int64_t last_icount = env->last_icount, current_icount; + current_icount = env->last_icount = icount_get_raw(); + + for (int i = 0; i < RV_MAX_TRIGGERS; i++) { + if (get_trigger_type(env, i) != TRIGGER_TYPE_INST_CNT) { + continue; + } + count = itrigger_get_count(env, i); + if (!count) { + continue; + } + /* + * Only when priviledge is changed or itrigger timer expires, + * the count field in itrigger tdata1 register is updated. + * And the count field in itrigger only contains remaining value. + */ + if (check_itrigger_priv(env, i)) { + /* + * If itrigger enabled in this priviledge mode, the number of + * executed instructions since last priviledge change + * should be reduced from current itrigger count. + */ + executed = current_icount - last_icount; + itrigger_set_count(env, i, count - executed); + if (count == executed) { + do_trigger_action(env, i); + } + } else { + /* + * If itrigger is not enabled in this priviledge mode, + * the number of executed instructions will be discard and + * the count field in itrigger will not change. + */ + timer_mod(env->itrigger_timer[i], + current_icount + count); + } + } +} + +static void riscv_itrigger_timer_cb(void *opaque) +{ + riscv_itrigger_update_count((CPURISCVState *)opaque); +} + +void riscv_itrigger_update_priv(CPURISCVState *env) +{ + riscv_itrigger_update_count(env); +} + target_ulong tdata_csr_read(CPURISCVState *env, int tdata_index) { switch (tdata_index) { @@ -XXX,XX +XXX,XX @@ void riscv_trigger_init(CPURISCVState *env) env->tdata3[i] = 0; env->cpu_breakpoint[i] = NULL; env->cpu_watchpoint[i] = NULL; + env->itrigger_timer[i] = timer_new_ns(QEMU_CLOCK_VIRTUAL, + riscv_itrigger_timer_cb, env); } } -- 2.38.1 From: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> When QEMU is not in icount mode, execute instruction one by one. The tdata1 can be read directly. When QEMU is in icount mode, use a timer to simulate the itrigger. The tdata1 may be not right because of lazy update of count in tdata1. Thus, We should pack the adjusted count into tdata1 before read it back. Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221013062946.7530-4-zhiwei_liu@linux.alibaba.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/debug.c | 72 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 72 insertions(+) diff --git a/target/riscv/debug.c b/target/riscv/debug.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/debug.c +++ b/target/riscv/debug.c @@ -XXX,XX +XXX,XX @@ void riscv_itrigger_update_priv(CPURISCVState *env) riscv_itrigger_update_count(env); } +static target_ulong itrigger_validate(CPURISCVState *env, + target_ulong ctrl) +{ + target_ulong val; + + /* validate the generic part first */ + val = tdata1_validate(env, ctrl, TRIGGER_TYPE_INST_CNT); + + /* validate unimplemented (always zero) bits */ + warn_always_zero_bit(ctrl, ITRIGGER_ACTION, "action"); + warn_always_zero_bit(ctrl, ITRIGGER_HIT, "hit"); + warn_always_zero_bit(ctrl, ITRIGGER_PENDING, "pending"); + + /* keep the mode and attribute bits */ + val |= ctrl & (ITRIGGER_VU | ITRIGGER_VS | ITRIGGER_U | ITRIGGER_S | + ITRIGGER_M | ITRIGGER_COUNT); + + return val; +} + +static void itrigger_reg_write(CPURISCVState *env, target_ulong index, + int tdata_index, target_ulong val) +{ + target_ulong new_val; + + switch (tdata_index) { + case TDATA1: + /* set timer for icount */ + new_val = itrigger_validate(env, val); + if (new_val != env->tdata1[index]) { + env->tdata1[index] = new_val; + if (icount_enabled()) { + env->last_icount = icount_get_raw(); + /* set the count to timer */ + timer_mod(env->itrigger_timer[index], + env->last_icount + itrigger_get_count(env, index)); + } + } + break; + case TDATA2: + qemu_log_mask(LOG_UNIMP, + "tdata2 is not supported for icount trigger\n"); + break; + case TDATA3: + qemu_log_mask(LOG_UNIMP, + "tdata3 is not supported for icount trigger\n"); + break; + default: + g_assert_not_reached(); + } + + return; +} + +static int itrigger_get_adjust_count(CPURISCVState *env) +{ + int count = itrigger_get_count(env, env->trigger_cur), executed; + if ((count != 0) && check_itrigger_priv(env, env->trigger_cur)) { + executed = icount_get_raw() - env->last_icount; + count += executed; + } + return count; +} + target_ulong tdata_csr_read(CPURISCVState *env, int tdata_index) { + int trigger_type; switch (tdata_index) { case TDATA1: + trigger_type = extract_trigger_type(env, env->tdata1[env->trigger_cur]); + if ((trigger_type == TRIGGER_TYPE_INST_CNT) && icount_enabled()) { + return deposit64(env->tdata1[env->trigger_cur], 10, 14, + itrigger_get_adjust_count(env)); + } return env->tdata1[env->trigger_cur]; case TDATA2: return env->tdata2[env->trigger_cur]; @@ -XXX,XX +XXX,XX @@ void tdata_csr_write(CPURISCVState *env, int tdata_index, target_ulong val) type6_reg_write(env, env->trigger_cur, tdata_index, val); break; case TRIGGER_TYPE_INST_CNT: + itrigger_reg_write(env, env->trigger_cur, tdata_index, val); + break; case TRIGGER_TYPE_INT: case TRIGGER_TYPE_EXCP: case TRIGGER_TYPE_EXT_SRC: -- 2.38.1 From: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Avoid calling riscv_itrigger_enabled() when calculate the tbflags. As the itrigger enable status can only be changed when write tdata1, migration load or itrigger fire, update env->itrigger_enabled at these places. Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221013062946.7530-5-zhiwei_liu@linux.alibaba.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 1 + target/riscv/cpu_helper.c | 3 +-- target/riscv/debug.c | 3 +++ target/riscv/machine.c | 15 +++++++++++++++ 4 files changed, 20 insertions(+), 2 deletions(-) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ struct CPUArchState { struct CPUWatchpoint *cpu_watchpoint[RV_MAX_TRIGGERS]; QEMUTimer *itrigger_timer[RV_MAX_TRIGGERS]; int64_t last_icount; + bool itrigger_enabled; /* machine specific rdtime callback */ uint64_t (*rdtime_fn)(void *); diff --git a/target/riscv/cpu_helper.c b/target/riscv/cpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_helper.c +++ b/target/riscv/cpu_helper.c @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPURISCVState *env, target_ulong *pc, get_field(env->mstatus_hs, MSTATUS_VS)); } if (riscv_feature(env, RISCV_FEATURE_DEBUG) && !icount_enabled()) { - flags = FIELD_DP32(flags, TB_FLAGS, ITRIGGER, - riscv_itrigger_enabled(env)); + flags = FIELD_DP32(flags, TB_FLAGS, ITRIGGER, env->itrigger_enabled); } #endif diff --git a/target/riscv/debug.c b/target/riscv/debug.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/debug.c +++ b/target/riscv/debug.c @@ -XXX,XX +XXX,XX @@ void helper_itrigger_match(CPURISCVState *env) } itrigger_set_count(env, i, count--); if (!count) { + env->itrigger_enabled = riscv_itrigger_enabled(env); do_trigger_action(env, i); } } @@ -XXX,XX +XXX,XX @@ static void itrigger_reg_write(CPURISCVState *env, target_ulong index, /* set the count to timer */ timer_mod(env->itrigger_timer[index], env->last_icount + itrigger_get_count(env, index)); + } else { + env->itrigger_enabled = riscv_itrigger_enabled(env); } } break; diff --git a/target/riscv/machine.c b/target/riscv/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/machine.c +++ b/target/riscv/machine.c @@ -XXX,XX +XXX,XX @@ #include "qemu/error-report.h" #include "sysemu/kvm.h" #include "migration/cpu.h" +#include "sysemu/cpu-timers.h" +#include "debug.h" static bool pmp_needed(void *opaque) { @@ -XXX,XX +XXX,XX @@ static bool debug_needed(void *opaque) return riscv_feature(env, RISCV_FEATURE_DEBUG); } +static int debug_post_load(void *opaque, int version_id) +{ + RISCVCPU *cpu = opaque; + CPURISCVState *env = &cpu->env; + + if (icount_enabled()) { + env->itrigger_enabled = riscv_itrigger_enabled(env); + } + + return 0; +} + static const VMStateDescription vmstate_debug = { .name = "cpu/debug", .version_id = 2, .minimum_version_id = 2, .needed = debug_needed, + .post_load = debug_post_load, .fields = (VMStateField[]) { VMSTATE_UINTTL(env.trigger_cur, RISCVCPU), VMSTATE_UINTTL_ARRAY(env.tdata1, RISCVCPU, RV_MAX_TRIGGERS), -- 2.38.1 From: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr> Commit 40244040a7a changed the way the S irqs are numbered. This breaks when using numa configuration, e.g.: ./qemu-system-riscv64 -nographic -machine virt,dumpdtb=numa-tree.dtb \ -m 2G -smp cpus=16 \ -object memory-backend-ram,id=mem0,size=512M \ -object memory-backend-ram,id=mem1,size=512M \ -object memory-backend-ram,id=mem2,size=512M \ -object memory-backend-ram,id=mem3,size=512M \ -numa node,cpus=0-3,memdev=mem0,nodeid=0 \ -numa node,cpus=4-7,memdev=mem1,nodeid=1 \ -numa node,cpus=8-11,memdev=mem2,nodeid=2 \ -numa node,cpus=12-15,memdev=mem3,nodeid=3 leads to: Unexpected error in object_property_find_err() at ../qom/object.c:1304: qemu-system-riscv64: Property 'riscv.sifive.plic.unnamed-gpio-out[8]' not found This patch makes the nubering of the S irqs identical to what it was before. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr> Message-Id: <20221114135122.1668703-1-frederic.petrot@univ-grenoble-alpes.fr> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/intc/sifive_plic.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/intc/sifive_plic.c b/hw/intc/sifive_plic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/sifive_plic.c +++ b/hw/intc/sifive_plic.c @@ -XXX,XX +XXX,XX @@ DeviceState *sifive_plic_create(hwaddr addr, char *hart_config, CPUState *cpu = qemu_get_cpu(cpu_num); if (plic->addr_config[i].mode == PLICMode_M) { - qdev_connect_gpio_out(dev, num_harts - plic->hartid_base + cpu_num, + qdev_connect_gpio_out(dev, cpu_num - hartid_base + num_harts, qdev_get_gpio_in(DEVICE(cpu), IRQ_M_EXT)); } if (plic->addr_config[i].mode == PLICMode_S) { - qdev_connect_gpio_out(dev, cpu_num, + qdev_connect_gpio_out(dev, cpu_num - hartid_base, qdev_get_gpio_in(DEVICE(cpu), IRQ_S_EXT)); } } -- 2.38.1 From: Anup Patel <apatel@ventanamicro.com> We should use "&&" instead of "&" when checking hcounteren.TM and henvcfg.STCE bits. Fixes: 3ec0fe18a31f ("target/riscv: Add vstimecmp suppor") Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221108125703.1463577-2-apatel@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException sstc(CPURISCVState *env, int csrno) } if (riscv_cpu_virt_enabled(env)) { - if (!(get_field(env->hcounteren, COUNTEREN_TM) & + if (!(get_field(env->hcounteren, COUNTEREN_TM) && get_field(env->henvcfg, HENVCFG_STCE))) { return RISCV_EXCP_VIRT_INSTRUCTION_FAULT; } -- 2.38.1 From: Atish Patra <atishp@rivosinc.com> The imsic DT binding[1] has changed and no longer require an ipi-id. The latest IMSIC driver dynamically allocates ipi id if slow-ipi is not defined. Get rid of the unused dt property which may lead to confusion. [1] https://lore.kernel.org/lkml/20221111044207.1478350-5-apatel@ventanamicro.com/ Signed-off-by: Atish Patra <atishp@rivosinc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221122080529.1692533-1-atishp@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/riscv/virt.h | 1 - hw/riscv/virt.c | 4 ---- 2 files changed, 5 deletions(-) diff --git a/include/hw/riscv/virt.h b/include/hw/riscv/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/riscv/virt.h +++ b/include/hw/riscv/virt.h @@ -XXX,XX +XXX,XX @@ enum { #define VIRT_PLATFORM_BUS_NUM_IRQS 32 -#define VIRT_IRQCHIP_IPI_MSI 1 #define VIRT_IRQCHIP_NUM_MSIS 255 #define VIRT_IRQCHIP_NUM_SOURCES VIRTIO_NDEV #define VIRT_IRQCHIP_NUM_PRIO_BITS 3 diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_imsic(RISCVVirtState *s, const MemMapEntry *memmap, riscv_socket_count(mc) * sizeof(uint32_t) * 4); qemu_fdt_setprop_cell(mc->fdt, imsic_name, "riscv,num-ids", VIRT_IRQCHIP_NUM_MSIS); - qemu_fdt_setprop_cells(mc->fdt, imsic_name, "riscv,ipi-id", - VIRT_IRQCHIP_IPI_MSI); if (riscv_socket_count(mc) > 1) { qemu_fdt_setprop_cell(mc->fdt, imsic_name, "riscv,hart-index-bits", imsic_num_bits(imsic_max_hart_per_socket)); @@ -XXX,XX +XXX,XX @@ static void create_fdt_imsic(RISCVVirtState *s, const MemMapEntry *memmap, riscv_socket_count(mc) * sizeof(uint32_t) * 4); qemu_fdt_setprop_cell(mc->fdt, imsic_name, "riscv,num-ids", VIRT_IRQCHIP_NUM_MSIS); - qemu_fdt_setprop_cells(mc->fdt, imsic_name, "riscv,ipi-id", - VIRT_IRQCHIP_IPI_MSI); if (imsic_guest_bits) { qemu_fdt_setprop_cell(mc->fdt, imsic_name, "riscv,guest-index-bits", imsic_guest_bits); -- 2.38.1 From: Jim Shu <jim.shu@sifive.com> let tlb_fill() function also increments PMU counter when it is from two-stage translation, so QEMU could also monitor these PMU events when CPU runs in VS/VU mode (like running guest OS). Signed-off-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221123090635.6574-1-jim.shu@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu_helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/riscv/cpu_helper.c b/target/riscv/cpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_helper.c +++ b/target/riscv/cpu_helper.c @@ -XXX,XX +XXX,XX @@ bool riscv_cpu_tlb_fill(CPUState *cs, vaddr address, int size, } } + pmu_tlb_fill_incr_ctr(cpu, access_type); if (riscv_cpu_virt_enabled(env) || ((riscv_cpu_two_stage_lookup(mmu_idx) || two_stage_lookup) && access_type != MMU_INST_FETCH)) { @@ -XXX,XX +XXX,XX @@ bool riscv_cpu_tlb_fill(CPUState *cs, vaddr address, int size, } } } else { - pmu_tlb_fill_incr_ctr(cpu, access_type); /* Single stage lookup */ ret = get_physical_address(env, &pa, &prot, address, NULL, access_type, mmu_idx, true, false, false); -- 2.38.1 From: Bin Meng <bmeng@tinylab.org> sstatus register dump is currently missing in riscv_cpu_dump_state(). As sstatus is a copy of mstatus, which is described in the priv spec, it seems redundant to print the same information twice. Add some comments for this to let people know this is intentional. Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221125050354.3166023-1-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_dump_state(CPUState *cs, FILE *f, int flags) CSR_MHARTID, CSR_MSTATUS, CSR_MSTATUSH, + /* + * CSR_SSTATUS is intentionally omitted here as its value + * can be figured out by looking at CSR_MSTATUS + */ CSR_HSTATUS, CSR_VSSTATUS, CSR_MIP, -- 2.38.1 From: Conor Dooley <conor.dooley@microchip.com> On PolarFire SoC, some peripherals (eg the PCI root port) are clocked by "Clock Conditioning Circuitry" in the FPGA. The specific clock depends on the FPGA bitstream & can be locked to one particular {D,P}LL - in the Icicle Kit Reference Design v2022.09 or later this is/will be the case. Linux v6.1+ will have a driver for this peripheral and devicetrees that previously relied on "fixed-frequency" clock nodes have been switched over to clock-controller nodes. The IOSCB region is represented in QEMU, but the specific region of it that the CCCs occupy has not so v6.1-rcN kernels fail to boot in QEMU. Add the regions as unimplemented so that the status-quo in terms of boot is maintained. Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Message-Id: <20221117225518.4102575-2-conor@kernel.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/misc/mchp_pfsoc_ioscb.h | 1 + hw/misc/mchp_pfsoc_ioscb.c | 6 ++++++ 2 files changed, 7 insertions(+) diff --git a/include/hw/misc/mchp_pfsoc_ioscb.h b/include/hw/misc/mchp_pfsoc_ioscb.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/mchp_pfsoc_ioscb.h +++ b/include/hw/misc/mchp_pfsoc_ioscb.h @@ -XXX,XX +XXX,XX @@ typedef struct MchpPfSoCIoscbState { MemoryRegion lane23; MemoryRegion ctrl; MemoryRegion cfg; + MemoryRegion ccc; MemoryRegion pll_mss; MemoryRegion cfm_mss; MemoryRegion pll_ddr; diff --git a/hw/misc/mchp_pfsoc_ioscb.c b/hw/misc/mchp_pfsoc_ioscb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/mchp_pfsoc_ioscb.c +++ b/hw/misc/mchp_pfsoc_ioscb.c @@ -XXX,XX +XXX,XX @@ */ #define IOSCB_WHOLE_REG_SIZE 0x10000000 #define IOSCB_SUBMOD_REG_SIZE 0x1000 +#define IOSCB_CCC_REG_SIZE 0x2000000 /* * There are many sub-modules in the IOSCB module. @@ -XXX,XX +XXX,XX @@ #define IOSCB_LANE23_BASE 0x06510000 #define IOSCB_CTRL_BASE 0x07020000 #define IOSCB_CFG_BASE 0x07080000 +#define IOSCB_CCC_BASE 0x08000000 #define IOSCB_PLL_MSS_BASE 0x0E001000 #define IOSCB_CFM_MSS_BASE 0x0E002000 #define IOSCB_PLL_DDR_BASE 0x0E010000 @@ -XXX,XX +XXX,XX @@ static void mchp_pfsoc_ioscb_realize(DeviceState *dev, Error **errp) "mchp.pfsoc.ioscb.cfg", IOSCB_SUBMOD_REG_SIZE); memory_region_add_subregion(&s->container, IOSCB_CFG_BASE, &s->cfg); + memory_region_init_io(&s->ccc, OBJECT(s), &mchp_pfsoc_dummy_ops, s, + "mchp.pfsoc.ioscb.ccc", IOSCB_CCC_REG_SIZE); + memory_region_add_subregion(&s->container, IOSCB_CCC_BASE, &s->ccc); + memory_region_init_io(&s->pll_mss, OBJECT(s), &mchp_pfsoc_pll_ops, s, "mchp.pfsoc.ioscb.pll_mss", IOSCB_SUBMOD_REG_SIZE); memory_region_add_subregion(&s->container, IOSCB_PLL_MSS_BASE, &s->pll_mss); -- 2.38.1 From: Conor Dooley <conor.dooley@microchip.com> The Fabric Interconnect Controllers provide interfaces between the FPGA fabric and the core complex. There are 5 FICs on PolarFire SoC, numbered 0 through 4. FIC2 is an AXI4 slave interface from the FPGA fabric and does not show up on the MSS memory map. FIC4 is dedicated to the User Crypto Processor and does not show up on the MSS memory map either. FIC 0, 1 & 3 do show up in the MSS memory map and neither FICs 0 or 1 are represented in QEMU, leading to load access violations while booting Linux for Icicle if PCIe is enabled as the root port is connected via either FIC 0 or 1. Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Message-Id: <20221117225518.4102575-3-conor@kernel.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/riscv/microchip_pfsoc.h | 2 + hw/riscv/microchip_pfsoc.c | 115 ++++++++++++++++------------- 2 files changed, 65 insertions(+), 52 deletions(-) diff --git a/include/hw/riscv/microchip_pfsoc.h b/include/hw/riscv/microchip_pfsoc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/riscv/microchip_pfsoc.h +++ b/include/hw/riscv/microchip_pfsoc.h @@ -XXX,XX +XXX,XX @@ enum { MICROCHIP_PFSOC_USB, MICROCHIP_PFSOC_QSPI_XIP, MICROCHIP_PFSOC_IOSCB, + MICROCHIP_PFSOC_FABRIC_FIC0, + MICROCHIP_PFSOC_FABRIC_FIC1, MICROCHIP_PFSOC_FABRIC_FIC3, MICROCHIP_PFSOC_DRAM_LO, MICROCHIP_PFSOC_DRAM_LO_ALIAS, diff --git a/hw/riscv/microchip_pfsoc.c b/hw/riscv/microchip_pfsoc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/microchip_pfsoc.c +++ b/hw/riscv/microchip_pfsoc.c @@ -XXX,XX +XXX,XX @@ * describes the complete IOSCB modules memory maps */ static const MemMapEntry microchip_pfsoc_memmap[] = { - [MICROCHIP_PFSOC_RSVD0] = { 0x0, 0x100 }, - [MICROCHIP_PFSOC_DEBUG] = { 0x100, 0xf00 }, - [MICROCHIP_PFSOC_E51_DTIM] = { 0x1000000, 0x2000 }, - [MICROCHIP_PFSOC_BUSERR_UNIT0] = { 0x1700000, 0x1000 }, - [MICROCHIP_PFSOC_BUSERR_UNIT1] = { 0x1701000, 0x1000 }, - [MICROCHIP_PFSOC_BUSERR_UNIT2] = { 0x1702000, 0x1000 }, - [MICROCHIP_PFSOC_BUSERR_UNIT3] = { 0x1703000, 0x1000 }, - [MICROCHIP_PFSOC_BUSERR_UNIT4] = { 0x1704000, 0x1000 }, - [MICROCHIP_PFSOC_CLINT] = { 0x2000000, 0x10000 }, - [MICROCHIP_PFSOC_L2CC] = { 0x2010000, 0x1000 }, - [MICROCHIP_PFSOC_DMA] = { 0x3000000, 0x100000 }, - [MICROCHIP_PFSOC_L2LIM] = { 0x8000000, 0x2000000 }, - [MICROCHIP_PFSOC_PLIC] = { 0xc000000, 0x4000000 }, - [MICROCHIP_PFSOC_MMUART0] = { 0x20000000, 0x1000 }, - [MICROCHIP_PFSOC_WDOG0] = { 0x20001000, 0x1000 }, - [MICROCHIP_PFSOC_SYSREG] = { 0x20002000, 0x2000 }, - [MICROCHIP_PFSOC_AXISW] = { 0x20004000, 0x1000 }, - [MICROCHIP_PFSOC_MPUCFG] = { 0x20005000, 0x1000 }, - [MICROCHIP_PFSOC_FMETER] = { 0x20006000, 0x1000 }, - [MICROCHIP_PFSOC_DDR_SGMII_PHY] = { 0x20007000, 0x1000 }, - [MICROCHIP_PFSOC_EMMC_SD] = { 0x20008000, 0x1000 }, - [MICROCHIP_PFSOC_DDR_CFG] = { 0x20080000, 0x40000 }, - [MICROCHIP_PFSOC_MMUART1] = { 0x20100000, 0x1000 }, - [MICROCHIP_PFSOC_MMUART2] = { 0x20102000, 0x1000 }, - [MICROCHIP_PFSOC_MMUART3] = { 0x20104000, 0x1000 }, - [MICROCHIP_PFSOC_MMUART4] = { 0x20106000, 0x1000 }, - [MICROCHIP_PFSOC_WDOG1] = { 0x20101000, 0x1000 }, - [MICROCHIP_PFSOC_WDOG2] = { 0x20103000, 0x1000 }, - [MICROCHIP_PFSOC_WDOG3] = { 0x20105000, 0x1000 }, - [MICROCHIP_PFSOC_WDOG4] = { 0x20106000, 0x1000 }, - [MICROCHIP_PFSOC_SPI0] = { 0x20108000, 0x1000 }, - [MICROCHIP_PFSOC_SPI1] = { 0x20109000, 0x1000 }, - [MICROCHIP_PFSOC_I2C0] = { 0x2010a000, 0x1000 }, - [MICROCHIP_PFSOC_I2C1] = { 0x2010b000, 0x1000 }, - [MICROCHIP_PFSOC_CAN0] = { 0x2010c000, 0x1000 }, - [MICROCHIP_PFSOC_CAN1] = { 0x2010d000, 0x1000 }, - [MICROCHIP_PFSOC_GEM0] = { 0x20110000, 0x2000 }, - [MICROCHIP_PFSOC_GEM1] = { 0x20112000, 0x2000 }, - [MICROCHIP_PFSOC_GPIO0] = { 0x20120000, 0x1000 }, - [MICROCHIP_PFSOC_GPIO1] = { 0x20121000, 0x1000 }, - [MICROCHIP_PFSOC_GPIO2] = { 0x20122000, 0x1000 }, - [MICROCHIP_PFSOC_RTC] = { 0x20124000, 0x1000 }, - [MICROCHIP_PFSOC_ENVM_CFG] = { 0x20200000, 0x1000 }, - [MICROCHIP_PFSOC_ENVM_DATA] = { 0x20220000, 0x20000 }, - [MICROCHIP_PFSOC_USB] = { 0x20201000, 0x1000 }, - [MICROCHIP_PFSOC_QSPI_XIP] = { 0x21000000, 0x1000000 }, - [MICROCHIP_PFSOC_IOSCB] = { 0x30000000, 0x10000000 }, - [MICROCHIP_PFSOC_FABRIC_FIC3] = { 0x40000000, 0x20000000 }, - [MICROCHIP_PFSOC_DRAM_LO] = { 0x80000000, 0x40000000 }, - [MICROCHIP_PFSOC_DRAM_LO_ALIAS] = { 0xc0000000, 0x40000000 }, - [MICROCHIP_PFSOC_DRAM_HI] = { 0x1000000000, 0x0 }, - [MICROCHIP_PFSOC_DRAM_HI_ALIAS] = { 0x1400000000, 0x0 }, + [MICROCHIP_PFSOC_RSVD0] = { 0x0, 0x100 }, + [MICROCHIP_PFSOC_DEBUG] = { 0x100, 0xf00 }, + [MICROCHIP_PFSOC_E51_DTIM] = { 0x1000000, 0x2000 }, + [MICROCHIP_PFSOC_BUSERR_UNIT0] = { 0x1700000, 0x1000 }, + [MICROCHIP_PFSOC_BUSERR_UNIT1] = { 0x1701000, 0x1000 }, + [MICROCHIP_PFSOC_BUSERR_UNIT2] = { 0x1702000, 0x1000 }, + [MICROCHIP_PFSOC_BUSERR_UNIT3] = { 0x1703000, 0x1000 }, + [MICROCHIP_PFSOC_BUSERR_UNIT4] = { 0x1704000, 0x1000 }, + [MICROCHIP_PFSOC_CLINT] = { 0x2000000, 0x10000 }, + [MICROCHIP_PFSOC_L2CC] = { 0x2010000, 0x1000 }, + [MICROCHIP_PFSOC_DMA] = { 0x3000000, 0x100000 }, + [MICROCHIP_PFSOC_L2LIM] = { 0x8000000, 0x2000000 }, + [MICROCHIP_PFSOC_PLIC] = { 0xc000000, 0x4000000 }, + [MICROCHIP_PFSOC_MMUART0] = { 0x20000000, 0x1000 }, + [MICROCHIP_PFSOC_WDOG0] = { 0x20001000, 0x1000 }, + [MICROCHIP_PFSOC_SYSREG] = { 0x20002000, 0x2000 }, + [MICROCHIP_PFSOC_AXISW] = { 0x20004000, 0x1000 }, + [MICROCHIP_PFSOC_MPUCFG] = { 0x20005000, 0x1000 }, + [MICROCHIP_PFSOC_FMETER] = { 0x20006000, 0x1000 }, + [MICROCHIP_PFSOC_DDR_SGMII_PHY] = { 0x20007000, 0x1000 }, + [MICROCHIP_PFSOC_EMMC_SD] = { 0x20008000, 0x1000 }, + [MICROCHIP_PFSOC_DDR_CFG] = { 0x20080000, 0x40000 }, + [MICROCHIP_PFSOC_MMUART1] = { 0x20100000, 0x1000 }, + [MICROCHIP_PFSOC_MMUART2] = { 0x20102000, 0x1000 }, + [MICROCHIP_PFSOC_MMUART3] = { 0x20104000, 0x1000 }, + [MICROCHIP_PFSOC_MMUART4] = { 0x20106000, 0x1000 }, + [MICROCHIP_PFSOC_WDOG1] = { 0x20101000, 0x1000 }, + [MICROCHIP_PFSOC_WDOG2] = { 0x20103000, 0x1000 }, + [MICROCHIP_PFSOC_WDOG3] = { 0x20105000, 0x1000 }, + [MICROCHIP_PFSOC_WDOG4] = { 0x20106000, 0x1000 }, + [MICROCHIP_PFSOC_SPI0] = { 0x20108000, 0x1000 }, + [MICROCHIP_PFSOC_SPI1] = { 0x20109000, 0x1000 }, + [MICROCHIP_PFSOC_I2C0] = { 0x2010a000, 0x1000 }, + [MICROCHIP_PFSOC_I2C1] = { 0x2010b000, 0x1000 }, + [MICROCHIP_PFSOC_CAN0] = { 0x2010c000, 0x1000 }, + [MICROCHIP_PFSOC_CAN1] = { 0x2010d000, 0x1000 }, + [MICROCHIP_PFSOC_GEM0] = { 0x20110000, 0x2000 }, + [MICROCHIP_PFSOC_GEM1] = { 0x20112000, 0x2000 }, + [MICROCHIP_PFSOC_GPIO0] = { 0x20120000, 0x1000 }, + [MICROCHIP_PFSOC_GPIO1] = { 0x20121000, 0x1000 }, + [MICROCHIP_PFSOC_GPIO2] = { 0x20122000, 0x1000 }, + [MICROCHIP_PFSOC_RTC] = { 0x20124000, 0x1000 }, + [MICROCHIP_PFSOC_ENVM_CFG] = { 0x20200000, 0x1000 }, + [MICROCHIP_PFSOC_ENVM_DATA] = { 0x20220000, 0x20000 }, + [MICROCHIP_PFSOC_USB] = { 0x20201000, 0x1000 }, + [MICROCHIP_PFSOC_QSPI_XIP] = { 0x21000000, 0x1000000 }, + [MICROCHIP_PFSOC_IOSCB] = { 0x30000000, 0x10000000 }, + [MICROCHIP_PFSOC_FABRIC_FIC0] = { 0x2000000000, 0x1000000000 }, + [MICROCHIP_PFSOC_FABRIC_FIC1] = { 0x3000000000, 0x1000000000 }, + [MICROCHIP_PFSOC_FABRIC_FIC3] = { 0x40000000, 0x20000000 }, + [MICROCHIP_PFSOC_DRAM_LO] = { 0x80000000, 0x40000000 }, + [MICROCHIP_PFSOC_DRAM_LO_ALIAS] = { 0xc0000000, 0x40000000 }, + [MICROCHIP_PFSOC_DRAM_HI] = { 0x1000000000, 0x0 }, + [MICROCHIP_PFSOC_DRAM_HI_ALIAS] = { 0x1400000000, 0x0 }, + }; static void microchip_pfsoc_soc_instance_init(Object *obj) @@ -XXX,XX +XXX,XX @@ static void microchip_pfsoc_soc_realize(DeviceState *dev, Error **errp) create_unimplemented_device("microchip.pfsoc.fabricfic3", memmap[MICROCHIP_PFSOC_FABRIC_FIC3].base, memmap[MICROCHIP_PFSOC_FABRIC_FIC3].size); + /* FPGA Fabric */ + create_unimplemented_device("microchip.pfsoc.fabricfic0", + memmap[MICROCHIP_PFSOC_FABRIC_FIC0].base, + memmap[MICROCHIP_PFSOC_FABRIC_FIC0].size); + /* FPGA Fabric */ + create_unimplemented_device("microchip.pfsoc.fabricfic1", + memmap[MICROCHIP_PFSOC_FABRIC_FIC1].base, + memmap[MICROCHIP_PFSOC_FABRIC_FIC1].size); /* QSPI Flash */ memory_region_init_rom(qspi_xip_mem, OBJECT(dev), -- 2.38.1 From: Conor Dooley <conor.dooley@microchip.com> The system controller on PolarFire SoC is access via a mailbox. The control registers for this mailbox lie in the "IOSCB" region & the interrupt is cleared via write to the "SYSREG" region. It also has a QSPI controller, usually connected to a flash chip, that is used for storing FPGA bitstreams and used for In-Application Programming (IAP). Linux has an implementation of the system controller, through which the hwrng is accessed, leading to load/store access faults. Add the QSPI as unimplemented and a very basic (effectively unimplemented) version of the system controller's mailbox. Rather than purely marking the regions as unimplemented, service the mailbox requests by reporting failures and raising the interrupt so a guest can better handle the lack of support. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221117225518.4102575-4-conor@kernel.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/misc/mchp_pfsoc_ioscb.h | 3 ++ include/hw/misc/mchp_pfsoc_sysreg.h | 1 + include/hw/riscv/microchip_pfsoc.h | 1 + hw/misc/mchp_pfsoc_ioscb.c | 72 ++++++++++++++++++++++++++++- hw/misc/mchp_pfsoc_sysreg.c | 18 ++++++-- hw/riscv/microchip_pfsoc.c | 6 +++ 6 files changed, 95 insertions(+), 6 deletions(-) diff --git a/include/hw/misc/mchp_pfsoc_ioscb.h b/include/hw/misc/mchp_pfsoc_ioscb.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/mchp_pfsoc_ioscb.h +++ b/include/hw/misc/mchp_pfsoc_ioscb.h @@ -XXX,XX +XXX,XX @@ typedef struct MchpPfSoCIoscbState { MemoryRegion lane01; MemoryRegion lane23; MemoryRegion ctrl; + MemoryRegion qspixip; + MemoryRegion mailbox; MemoryRegion cfg; MemoryRegion ccc; MemoryRegion pll_mss; @@ -XXX,XX +XXX,XX @@ typedef struct MchpPfSoCIoscbState { MemoryRegion cfm_sgmii; MemoryRegion bc_sgmii; MemoryRegion io_calib_sgmii; + qemu_irq irq; } MchpPfSoCIoscbState; #define TYPE_MCHP_PFSOC_IOSCB "mchp.pfsoc.ioscb" diff --git a/include/hw/misc/mchp_pfsoc_sysreg.h b/include/hw/misc/mchp_pfsoc_sysreg.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/mchp_pfsoc_sysreg.h +++ b/include/hw/misc/mchp_pfsoc_sysreg.h @@ -XXX,XX +XXX,XX @@ typedef struct MchpPfSoCSysregState { SysBusDevice parent; MemoryRegion sysreg; + qemu_irq irq; } MchpPfSoCSysregState; #define TYPE_MCHP_PFSOC_SYSREG "mchp.pfsoc.sysreg" diff --git a/include/hw/riscv/microchip_pfsoc.h b/include/hw/riscv/microchip_pfsoc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/riscv/microchip_pfsoc.h +++ b/include/hw/riscv/microchip_pfsoc.h @@ -XXX,XX +XXX,XX @@ enum { MICROCHIP_PFSOC_MMUART2_IRQ = 92, MICROCHIP_PFSOC_MMUART3_IRQ = 93, MICROCHIP_PFSOC_MMUART4_IRQ = 94, + MICROCHIP_PFSOC_MAILBOX_IRQ = 96, }; #define MICROCHIP_PFSOC_MANAGEMENT_CPU_COUNT 1 diff --git a/hw/misc/mchp_pfsoc_ioscb.c b/hw/misc/mchp_pfsoc_ioscb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/mchp_pfsoc_ioscb.c +++ b/hw/misc/mchp_pfsoc_ioscb.c @@ -XXX,XX +XXX,XX @@ #include "qemu/bitops.h" #include "qemu/log.h" #include "qapi/error.h" +#include "hw/irq.h" #include "hw/sysbus.h" #include "hw/misc/mchp_pfsoc_ioscb.h" @@ -XXX,XX +XXX,XX @@ #define IOSCB_WHOLE_REG_SIZE 0x10000000 #define IOSCB_SUBMOD_REG_SIZE 0x1000 #define IOSCB_CCC_REG_SIZE 0x2000000 +#define IOSCB_CTRL_REG_SIZE 0x800 +#define IOSCB_QSPIXIP_REG_SIZE 0x200 + /* * There are many sub-modules in the IOSCB module. @@ -XXX,XX +XXX,XX @@ #define IOSCB_LANE01_BASE 0x06500000 #define IOSCB_LANE23_BASE 0x06510000 #define IOSCB_CTRL_BASE 0x07020000 +#define IOSCB_QSPIXIP_BASE 0x07020100 +#define IOSCB_MAILBOX_BASE 0x07020800 #define IOSCB_CFG_BASE 0x07080000 #define IOSCB_CCC_BASE 0x08000000 #define IOSCB_PLL_MSS_BASE 0x0E001000 @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps mchp_pfsoc_io_calib_ddr_ops = { .endianness = DEVICE_LITTLE_ENDIAN, }; +#define SERVICES_CR 0x50 +#define SERVICES_SR 0x54 +#define SERVICES_STATUS_SHIFT 16 + +static uint64_t mchp_pfsoc_ctrl_read(void *opaque, hwaddr offset, + unsigned size) +{ + uint32_t val = 0; + + switch (offset) { + case SERVICES_SR: + /* + * Although some services have no error codes, most do. All services + * that do implement errors, begin their error codes at 1. Treat all + * service requests as failures & return 1. + * See the "PolarFire® FPGA and PolarFire SoC FPGA System Services" + * user guide for more information on service error codes. + */ + val = 1u << SERVICES_STATUS_SHIFT; + break; + default: + qemu_log_mask(LOG_UNIMP, "%s: unimplemented device read " + "(size %d, offset 0x%" HWADDR_PRIx ")\n", + __func__, size, offset); + } + + return val; +} + +static void mchp_pfsoc_ctrl_write(void *opaque, hwaddr offset, + uint64_t value, unsigned size) +{ + MchpPfSoCIoscbState *s = opaque; + + switch (offset) { + case SERVICES_CR: + qemu_irq_raise(s->irq); + break; + default: + qemu_log_mask(LOG_UNIMP, "%s: unimplemented device write " + "(size %d, value 0x%" PRIx64 + ", offset 0x%" HWADDR_PRIx ")\n", + __func__, size, value, offset); + } +} + +static const MemoryRegionOps mchp_pfsoc_ctrl_ops = { + .read = mchp_pfsoc_ctrl_read, + .write = mchp_pfsoc_ctrl_write, + .endianness = DEVICE_LITTLE_ENDIAN, +}; + static void mchp_pfsoc_ioscb_realize(DeviceState *dev, Error **errp) { MchpPfSoCIoscbState *s = MCHP_PFSOC_IOSCB(dev); @@ -XXX,XX +XXX,XX @@ static void mchp_pfsoc_ioscb_realize(DeviceState *dev, Error **errp) "mchp.pfsoc.ioscb.lane23", IOSCB_SUBMOD_REG_SIZE); memory_region_add_subregion(&s->container, IOSCB_LANE23_BASE, &s->lane23); - memory_region_init_io(&s->ctrl, OBJECT(s), &mchp_pfsoc_dummy_ops, s, - "mchp.pfsoc.ioscb.ctrl", IOSCB_SUBMOD_REG_SIZE); + memory_region_init_io(&s->ctrl, OBJECT(s), &mchp_pfsoc_ctrl_ops, s, + "mchp.pfsoc.ioscb.ctrl", IOSCB_CTRL_REG_SIZE); memory_region_add_subregion(&s->container, IOSCB_CTRL_BASE, &s->ctrl); + memory_region_init_io(&s->qspixip, OBJECT(s), &mchp_pfsoc_dummy_ops, s, + "mchp.pfsoc.ioscb.qspixip", IOSCB_QSPIXIP_REG_SIZE); + memory_region_add_subregion(&s->container, IOSCB_QSPIXIP_BASE, &s->qspixip); + + memory_region_init_io(&s->mailbox, OBJECT(s), &mchp_pfsoc_dummy_ops, s, + "mchp.pfsoc.ioscb.mailbox", IOSCB_SUBMOD_REG_SIZE); + memory_region_add_subregion(&s->container, IOSCB_MAILBOX_BASE, &s->mailbox); + memory_region_init_io(&s->cfg, OBJECT(s), &mchp_pfsoc_dummy_ops, s, "mchp.pfsoc.ioscb.cfg", IOSCB_SUBMOD_REG_SIZE); memory_region_add_subregion(&s->container, IOSCB_CFG_BASE, &s->cfg); @@ -XXX,XX +XXX,XX @@ static void mchp_pfsoc_ioscb_realize(DeviceState *dev, Error **errp) IOSCB_SUBMOD_REG_SIZE); memory_region_add_subregion(&s->container, IOSCB_IO_CALIB_SGMII_BASE, &s->io_calib_sgmii); + + sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq); } static void mchp_pfsoc_ioscb_class_init(ObjectClass *klass, void *data) diff --git a/hw/misc/mchp_pfsoc_sysreg.c b/hw/misc/mchp_pfsoc_sysreg.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/mchp_pfsoc_sysreg.c +++ b/hw/misc/mchp_pfsoc_sysreg.c @@ -XXX,XX +XXX,XX @@ #include "qemu/bitops.h" #include "qemu/log.h" #include "qapi/error.h" +#include "hw/irq.h" #include "hw/sysbus.h" #include "hw/misc/mchp_pfsoc_sysreg.h" #define ENVM_CR 0xb8 +#define MESSAGE_INT 0x118c static uint64_t mchp_pfsoc_sysreg_read(void *opaque, hwaddr offset, unsigned size) @@ -XXX,XX +XXX,XX @@ static uint64_t mchp_pfsoc_sysreg_read(void *opaque, hwaddr offset, static void mchp_pfsoc_sysreg_write(void *opaque, hwaddr offset, uint64_t value, unsigned size) { - qemu_log_mask(LOG_UNIMP, "%s: unimplemented device write " - "(size %d, value 0x%" PRIx64 - ", offset 0x%" HWADDR_PRIx ")\n", - __func__, size, value, offset); + MchpPfSoCSysregState *s = opaque; + switch (offset) { + case MESSAGE_INT: + qemu_irq_lower(s->irq); + break; + default: + qemu_log_mask(LOG_UNIMP, "%s: unimplemented device write " + "(size %d, value 0x%" PRIx64 + ", offset 0x%" HWADDR_PRIx ")\n", + __func__, size, value, offset); + } } static const MemoryRegionOps mchp_pfsoc_sysreg_ops = { @@ -XXX,XX +XXX,XX @@ static void mchp_pfsoc_sysreg_realize(DeviceState *dev, Error **errp) "mchp.pfsoc.sysreg", MCHP_PFSOC_SYSREG_REG_SIZE); sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->sysreg); + sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq); } static void mchp_pfsoc_sysreg_class_init(ObjectClass *klass, void *data) diff --git a/hw/riscv/microchip_pfsoc.c b/hw/riscv/microchip_pfsoc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/microchip_pfsoc.c +++ b/hw/riscv/microchip_pfsoc.c @@ -XXX,XX +XXX,XX @@ static void microchip_pfsoc_soc_realize(DeviceState *dev, Error **errp) sysbus_realize(SYS_BUS_DEVICE(&s->sysreg), errp); sysbus_mmio_map(SYS_BUS_DEVICE(&s->sysreg), 0, memmap[MICROCHIP_PFSOC_SYSREG].base); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->sysreg), 0, + qdev_get_gpio_in(DEVICE(s->plic), + MICROCHIP_PFSOC_MAILBOX_IRQ)); /* AXISW */ create_unimplemented_device("microchip.pfsoc.axisw", @@ -XXX,XX +XXX,XX @@ static void microchip_pfsoc_soc_realize(DeviceState *dev, Error **errp) sysbus_realize(SYS_BUS_DEVICE(&s->ioscb), errp); sysbus_mmio_map(SYS_BUS_DEVICE(&s->ioscb), 0, memmap[MICROCHIP_PFSOC_IOSCB].base); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->ioscb), 0, + qdev_get_gpio_in(DEVICE(s->plic), + MICROCHIP_PFSOC_MAILBOX_IRQ)); /* FPGA Fabric */ create_unimplemented_device("microchip.pfsoc.fabricfic3", -- 2.38.1 From: Jim Shu <jim.shu@sifive.com> If the number of interrupt is not multiple of 32, PLIC will have out-of-bound access to source_priority array. Compute the number of interrupt in the last word to avoid this out-of-bound access of array. Signed-off-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Bin Meng <bmeng@tinylab.org> Message-Id: <20221127165753.30533-1-jim.shu@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/intc/sifive_plic.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/hw/intc/sifive_plic.c b/hw/intc/sifive_plic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/sifive_plic.c +++ b/hw/intc/sifive_plic.c @@ -XXX,XX +XXX,XX @@ static uint32_t sifive_plic_claimed(SiFivePLICState *plic, uint32_t addrid) uint32_t max_irq = 0; uint32_t max_prio = plic->target_priority[addrid]; int i, j; + int num_irq_in_word = 32; for (i = 0; i < plic->bitfield_words; i++) { uint32_t pending_enabled_not_claimed = @@ -XXX,XX +XXX,XX @@ static uint32_t sifive_plic_claimed(SiFivePLICState *plic, uint32_t addrid) continue; } - for (j = 0; j < 32; j++) { + if (i == (plic->bitfield_words - 1)) { + /* + * If plic->num_sources is not multiple of 32, num-of-irq in last + * word is not 32. Compute the num-of-irq of last word to avoid + * out-of-bound access of source_priority array. + */ + num_irq_in_word = plic->num_sources - ((plic->bitfield_words - 1) << 5); + } + + for (j = 0; j < num_irq_in_word; j++) { int irq = (i << 5) + j; uint32_t prio = plic->source_priority[irq]; int enabled = pending_enabled_not_claimed & (1 << j); -- 2.38.1 From: Bin Meng <bmeng@tinylab.org> The priv spec v1.12 says: If no PMP entry matches an M-mode access, the access succeeds. If no PMP entry matches an S-mode or U-mode access, but at least one PMP entry is implemented, the access fails. Failed accesses generate an instruction, load, or store access-fault exception. At present the exception cause is set to 'illegal instruction' but should have been 'instruction access fault'. Fixes: d102f19a2085 ("target/riscv/pmp: Raise exception if no PMP entry is configured") Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221205065303.204095-1-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/op_helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/riscv/op_helper.c b/target/riscv/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/op_helper.c +++ b/target/riscv/op_helper.c @@ -XXX,XX +XXX,XX @@ target_ulong helper_mret(CPURISCVState *env) if (riscv_feature(env, RISCV_FEATURE_PMP) && !pmp_get_num_rules(env) && (prev_priv != PRV_M)) { - riscv_raise_exception(env, RISCV_EXCP_ILLEGAL_INST, GETPC()); + riscv_raise_exception(env, RISCV_EXCP_INST_ACCESS_FAULT, GETPC()); } target_ulong prev_virt = get_field(env->mstatus, MSTATUS_MPV); -- 2.38.1 From: Richard Henderson <richard.henderson@linaro.org> Failure to set pc_succ_insn may result in a TB covering zero bytes, which triggers an assert within the code generator. Cc: qemu-stable@nongnu.org Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1224 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20221203175744.151365-1-richard.henderson@linaro.org> [ Changes by AF: - Add missing run-plugin-test-noc-% line ] Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/translate.c | 12 ++++-------- tests/tcg/Makefile.target | 2 ++ tests/tcg/riscv64/Makefile.target | 6 ++++++ tests/tcg/riscv64/test-noc.S | 32 +++++++++++++++++++++++++++++++ 4 files changed, 44 insertions(+), 8 deletions(-) create mode 100644 tests/tcg/riscv64/test-noc.S diff --git a/target/riscv/translate.c b/target/riscv/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/translate.c +++ b/target/riscv/translate.c @@ -XXX,XX +XXX,XX @@ static void decode_opc(CPURISCVState *env, DisasContext *ctx, uint16_t opcode) ctx->virt_inst_excp = false; /* Check for compressed insn */ if (insn_len(opcode) == 2) { - if (!has_ext(ctx, RVC)) { - gen_exception_illegal(ctx); - } else { - ctx->opcode = opcode; - ctx->pc_succ_insn = ctx->base.pc_next + 2; - if (decode_insn16(ctx, opcode)) { - return; - } + ctx->opcode = opcode; + ctx->pc_succ_insn = ctx->base.pc_next + 2; + if (has_ext(ctx, RVC) && decode_insn16(ctx, opcode)) { + return; } } else { uint32_t opcode32 = opcode; diff --git a/tests/tcg/Makefile.target b/tests/tcg/Makefile.target index XXXXXXX..XXXXXXX 100644 --- a/tests/tcg/Makefile.target +++ b/tests/tcg/Makefile.target @@ -XXX,XX +XXX,XX @@ endif %: %.c $(CC) $(CFLAGS) $(EXTRA_CFLAGS) $< -o $@ $(LDFLAGS) +%: %.S + $(CC) $(CFLAGS) $(EXTRA_CFLAGS) $< -o $@ $(LDFLAGS) else # For softmmu targets we include a different Makefile fragement as the # build options for bare programs are usually pretty different. They diff --git a/tests/tcg/riscv64/Makefile.target b/tests/tcg/riscv64/Makefile.target index XXXXXXX..XXXXXXX 100644 --- a/tests/tcg/riscv64/Makefile.target +++ b/tests/tcg/riscv64/Makefile.target @@ -XXX,XX +XXX,XX @@ VPATH += $(SRC_PATH)/tests/tcg/riscv64 TESTS += test-div TESTS += noexec + +# Disable compressed instructions for test-noc +TESTS += test-noc +test-noc: LDFLAGS = -nostdlib -static +run-test-noc: QEMU_OPTS += -cpu rv64,c=false +run-plugin-test-noc-%: QEMU_OPTS += -cpu rv64,c=false diff --git a/tests/tcg/riscv64/test-noc.S b/tests/tcg/riscv64/test-noc.S new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/tcg/riscv64/test-noc.S @@ -XXX,XX +XXX,XX @@ +#include <asm/unistd.h> + + .text + .globl _start +_start: + .option norvc + li a0, 4 /* SIGILL */ + la a1, sa + li a2, 0 + li a3, 8 + li a7, __NR_rt_sigaction + scall + + .option rvc + li a0, 1 + j exit + .option norvc + +pass: + li a0, 0 +exit: + li a7, __NR_exit + scall + + .data + /* struct kernel_sigaction sa = { .sa_handler = pass }; */ + .type sa, @object + .size sa, 32 +sa: + .dword pass + .zero 24 + -- 2.38.1 From: Bin Meng <bmeng@tinylab.org> There are 2 paths in helper_sret() and the same mstatus update codes are replicated. Extract the common parts to simplify it a little bit. Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221207090037.281452-1-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/op_helper.c | 20 ++++++-------------- 1 file changed, 6 insertions(+), 14 deletions(-) diff --git a/target/riscv/op_helper.c b/target/riscv/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/op_helper.c +++ b/target/riscv/op_helper.c @@ -XXX,XX +XXX,XX @@ target_ulong helper_sret(CPURISCVState *env) } mstatus = env->mstatus; + prev_priv = get_field(mstatus, MSTATUS_SPP); + mstatus = set_field(mstatus, MSTATUS_SIE, + get_field(mstatus, MSTATUS_SPIE)); + mstatus = set_field(mstatus, MSTATUS_SPIE, 1); + mstatus = set_field(mstatus, MSTATUS_SPP, PRV_U); + env->mstatus = mstatus; if (riscv_has_ext(env, RVH) && !riscv_cpu_virt_enabled(env)) { /* We support Hypervisor extensions and virtulisation is disabled */ target_ulong hstatus = env->hstatus; - prev_priv = get_field(mstatus, MSTATUS_SPP); prev_virt = get_field(hstatus, HSTATUS_SPV); hstatus = set_field(hstatus, HSTATUS_SPV, 0); - mstatus = set_field(mstatus, MSTATUS_SPP, 0); - mstatus = set_field(mstatus, SSTATUS_SIE, - get_field(mstatus, SSTATUS_SPIE)); - mstatus = set_field(mstatus, SSTATUS_SPIE, 1); - env->mstatus = mstatus; env->hstatus = hstatus; if (prev_virt) { @@ -XXX,XX +XXX,XX @@ target_ulong helper_sret(CPURISCVState *env) } riscv_cpu_set_virt_enabled(env, prev_virt); - } else { - prev_priv = get_field(mstatus, MSTATUS_SPP); - - mstatus = set_field(mstatus, MSTATUS_SIE, - get_field(mstatus, MSTATUS_SPIE)); - mstatus = set_field(mstatus, MSTATUS_SPIE, 1); - mstatus = set_field(mstatus, MSTATUS_SPP, PRV_U); - env->mstatus = mstatus; } riscv_cpu_set_mode(env, prev_priv); -- 2.38.1 From: Bin Meng <bmeng@tinylab.org> Since priv spec v1.12, MRET and SRET now clear mstatus.MPRV when leaving M-mode. Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221207090037.281452-2-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/op_helper.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/target/riscv/op_helper.c b/target/riscv/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/op_helper.c +++ b/target/riscv/op_helper.c @@ -XXX,XX +XXX,XX @@ target_ulong helper_sret(CPURISCVState *env) get_field(mstatus, MSTATUS_SPIE)); mstatus = set_field(mstatus, MSTATUS_SPIE, 1); mstatus = set_field(mstatus, MSTATUS_SPP, PRV_U); + if (env->priv_ver >= PRIV_VERSION_1_12_0) { + mstatus = set_field(mstatus, MSTATUS_MPRV, 0); + } env->mstatus = mstatus; if (riscv_has_ext(env, RVH) && !riscv_cpu_virt_enabled(env)) { @@ -XXX,XX +XXX,XX @@ target_ulong helper_mret(CPURISCVState *env) mstatus = set_field(mstatus, MSTATUS_MPIE, 1); mstatus = set_field(mstatus, MSTATUS_MPP, PRV_U); mstatus = set_field(mstatus, MSTATUS_MPV, 0); + if ((env->priv_ver >= PRIV_VERSION_1_12_0) && (prev_priv != PRV_M)) { + mstatus = set_field(mstatus, MSTATUS_MPRV, 0); + } env->mstatus = mstatus; riscv_cpu_set_mode(env, prev_priv); -- 2.38.1 From: Christoph Muellner <christoph.muellner@vrull.eu> This patch adds support for the Zawrs ISA extension. Given the current (incomplete) implementation of reservation sets there seems to be no way to provide a full emulation of the WRS instruction (wake on reservation set invalidation or timeout or interrupt). Therefore, we just exit the TB and return to the main loop. The specification can be found here: https://github.com/riscv/riscv-zawrs/blob/main/zawrs.adoc Note, that the Zawrs extension is frozen, but not ratified yet. Changes since v3: * Remove "RFC" since the extension is frozen * Rebase on master and fix integration issues * Fix entry ordering in extension list Changes since v2: * Rebase on master and resolve conflicts * Adjustments according to a specification change * Inline REQUIRE_ZAWRS() since it has only one user Changes since v1: * Adding zawrs to the ISA string that is passed to the kernel Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221005144948.3421504-1-christoph.muellner@vrull.eu> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 1 + target/riscv/insn32.decode | 4 ++ target/riscv/cpu.c | 7 +++ target/riscv/translate.c | 1 + target/riscv/insn_trans/trans_rvzawrs.c.inc | 51 +++++++++++++++++++++ 5 files changed, 64 insertions(+) create mode 100644 target/riscv/insn_trans/trans_rvzawrs.c.inc diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ struct RISCVCPUConfig { bool ext_svnapot; bool ext_svpbmt; bool ext_zdinx; + bool ext_zawrs; bool ext_zfh; bool ext_zfhmin; bool ext_zfinx; diff --git a/target/riscv/insn32.decode b/target/riscv/insn32.decode index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn32.decode +++ b/target/riscv/insn32.decode @@ -XXX,XX +XXX,XX @@ vsetvli 0 ........... ..... 111 ..... 1010111 @r2_zimm11 vsetivli 11 .......... ..... 111 ..... 1010111 @r2_zimm10 vsetvl 1000000 ..... ..... 111 ..... 1010111 @r +# *** Zawrs Standard Extension *** +wrs_nto 000000001101 00000 000 00000 1110011 +wrs_sto 000000011101 00000 000 00000 1110011 + # *** RV32 Zba Standard Extension *** sh1add 0010000 .......... 010 ..... 0110011 @r sh2add 0010000 .......... 100 ..... 0110011 @r diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static const struct isa_ext_data isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(zicsr, true, PRIV_VERSION_1_10_0, ext_icsr), ISA_EXT_DATA_ENTRY(zifencei, true, PRIV_VERSION_1_10_0, ext_ifencei), ISA_EXT_DATA_ENTRY(zihintpause, true, PRIV_VERSION_1_10_0, ext_zihintpause), + ISA_EXT_DATA_ENTRY(zawrs, true, PRIV_VERSION_1_12_0, ext_zawrs), ISA_EXT_DATA_ENTRY(zfh, true, PRIV_VERSION_1_12_0, ext_zfh), ISA_EXT_DATA_ENTRY(zfhmin, true, PRIV_VERSION_1_12_0, ext_zfhmin), ISA_EXT_DATA_ENTRY(zfinx, true, PRIV_VERSION_1_12_0, ext_zfinx), @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_realize(DeviceState *dev, Error **errp) return; } + if ((cpu->cfg.ext_zawrs) && !cpu->cfg.ext_a) { + error_setg(errp, "Zawrs extension requires A extension"); + return; + } + if ((cpu->cfg.ext_zfh || cpu->cfg.ext_zfhmin) && !cpu->cfg.ext_f) { error_setg(errp, "Zfh/Zfhmin extensions require F extension"); return; @@ -XXX,XX +XXX,XX @@ static Property riscv_cpu_extensions[] = { DEFINE_PROP_BOOL("Zifencei", RISCVCPU, cfg.ext_ifencei, true), DEFINE_PROP_BOOL("Zicsr", RISCVCPU, cfg.ext_icsr, true), DEFINE_PROP_BOOL("Zihintpause", RISCVCPU, cfg.ext_zihintpause, true), + DEFINE_PROP_BOOL("Zawrs", RISCVCPU, cfg.ext_zawrs, true), DEFINE_PROP_BOOL("Zfh", RISCVCPU, cfg.ext_zfh, false), DEFINE_PROP_BOOL("Zfhmin", RISCVCPU, cfg.ext_zfhmin, false), DEFINE_PROP_BOOL("Zve32f", RISCVCPU, cfg.ext_zve32f, false), diff --git a/target/riscv/translate.c b/target/riscv/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/translate.c +++ b/target/riscv/translate.c @@ -XXX,XX +XXX,XX @@ static uint32_t opcode_at(DisasContextBase *dcbase, target_ulong pc) #include "insn_trans/trans_rvh.c.inc" #include "insn_trans/trans_rvv.c.inc" #include "insn_trans/trans_rvb.c.inc" +#include "insn_trans/trans_rvzawrs.c.inc" #include "insn_trans/trans_rvzfh.c.inc" #include "insn_trans/trans_rvk.c.inc" #include "insn_trans/trans_privileged.c.inc" diff --git a/target/riscv/insn_trans/trans_rvzawrs.c.inc b/target/riscv/insn_trans/trans_rvzawrs.c.inc new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/target/riscv/insn_trans/trans_rvzawrs.c.inc @@ -XXX,XX +XXX,XX @@ +/* + * RISC-V translation routines for the RISC-V Zawrs Extension. + * + * Copyright (c) 2022 Christoph Muellner, christoph.muellner@vrull.io + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2 or later, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +static bool trans_wrs(DisasContext *ctx) +{ + if (!ctx->cfg_ptr->ext_zawrs) { + return false; + } + + /* + * The specification says: + * While stalled, an implementation is permitted to occasionally + * terminate the stall and complete execution for any reason. + * + * So let's just exit TB and return to the main loop. + */ + + /* Clear the load reservation (if any). */ + tcg_gen_movi_tl(load_res, -1); + + gen_set_pc_imm(ctx, ctx->pc_succ_insn); + tcg_gen_exit_tb(NULL, 0); + ctx->base.is_jmp = DISAS_NORETURN; + + return true; +} + +#define GEN_TRANS_WRS(insn) \ +static bool trans_ ## insn(DisasContext *ctx, arg_ ## insn *a) \ +{ \ + (void)a; \ + return trans_wrs(ctx); \ +} + +GEN_TRANS_WRS(wrs_nto) +GEN_TRANS_WRS(wrs_sto) -- 2.38.1 From: Bin Meng <bmeng@tinylab.org> hw/pci/Kconfig says MSI_NONBROKEN should be selected by interrupt controllers regardless of how MSI is implemented. msi_nonbroken is initialized to true in sifive_plic_realize(). Let SIFIVE_PLIC select MSI_NONBROKEN and drop the selection from RISC-V machines. Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Message-Id: <20221211030829.802437-1-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/intc/Kconfig | 1 + hw/riscv/Kconfig | 5 ----- 2 files changed, 1 insertion(+), 5 deletions(-) diff --git a/hw/intc/Kconfig b/hw/intc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/Kconfig +++ b/hw/intc/Kconfig @@ -XXX,XX +XXX,XX @@ config RISCV_IMSIC config SIFIVE_PLIC bool + select MSI_NONBROKEN config GOLDFISH_PIC bool diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/Kconfig +++ b/hw/riscv/Kconfig @@ -XXX,XX +XXX,XX @@ config MICROCHIP_PFSOC select MCHP_PFSOC_IOSCB select MCHP_PFSOC_MMUART select MCHP_PFSOC_SYSREG - select MSI_NONBROKEN select RISCV_ACLINT select SIFIVE_PDMA select SIFIVE_PLIC @@ -XXX,XX +XXX,XX @@ config RISCV_VIRT imply TPM_TIS_SYSBUS select RISCV_NUMA select GOLDFISH_RTC - select MSI_NONBROKEN select PCI select PCI_EXPRESS_GENERIC_BRIDGE select PFLASH_CFI01 @@ -XXX,XX +XXX,XX @@ config RISCV_VIRT config SIFIVE_E bool - select MSI_NONBROKEN select RISCV_ACLINT select SIFIVE_GPIO select SIFIVE_PLIC @@ -XXX,XX +XXX,XX @@ config SIFIVE_E config SIFIVE_U bool select CADENCE - select MSI_NONBROKEN select RISCV_ACLINT select SIFIVE_GPIO select SIFIVE_PDMA @@ -XXX,XX +XXX,XX @@ config SPIKE bool select RISCV_NUMA select HTIF - select MSI_NONBROKEN select RISCV_ACLINT select SIFIVE_PLIC -- 2.38.1 From: Bin Meng <bmeng@tinylab.org> hw/pci/Kconfig says MSI_NONBROKEN should be selected by interrupt controllers regardless of how MSI is implemented. msi_nonbroken is initialized to true in both riscv_aplic_realize() and riscv_imsic_realize(). Select MSI_NONBROKEN in RISCV_APLIC and RISCV_IMSIC. Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20221211030829.802437-2-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/intc/Kconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/hw/intc/Kconfig b/hw/intc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/Kconfig +++ b/hw/intc/Kconfig @@ -XXX,XX +XXX,XX @@ config RISCV_ACLINT config RISCV_APLIC bool + select MSI_NONBROKEN config RISCV_IMSIC bool + select MSI_NONBROKEN config SIFIVE_PLIC bool -- 2.38.1 From: Bin Meng <bmeng@tinylab.org> Since commit ef6310064820 ("hw/riscv: opentitan: Update to the latest build") the IBEX PLIC model was replaced with the SiFive PLIC model in the 'opentitan' machine but we forgot the add the dependency there. Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221211030829.802437-3-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/Kconfig +++ b/hw/riscv/Kconfig @@ -XXX,XX +XXX,XX @@ config MICROCHIP_PFSOC config OPENTITAN bool select IBEX + select SIFIVE_PLIC select UNIMP config SHAKTI_C -- 2.38.1 From: Bin Meng <bmeng@tinylab.org> SHAKTI_C machine Kconfig option was inserted in disorder. Fix it. Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Message-Id: <20221211030829.802437-4-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/Kconfig | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/Kconfig +++ b/hw/riscv/Kconfig @@ -XXX,XX +XXX,XX @@ config RISCV_NUMA config IBEX bool +# RISC-V machines in alphabetical order + config MICROCHIP_PFSOC bool select CADENCE_SDHCI @@ -XXX,XX +XXX,XX @@ config OPENTITAN select SIFIVE_PLIC select UNIMP -config SHAKTI_C - bool - select UNIMP - select SHAKTI_UART - select RISCV_ACLINT - select SIFIVE_PLIC - config RISCV_VIRT bool imply PCI_DEVICES @@ -XXX,XX +XXX,XX @@ config RISCV_VIRT select FW_CFG_DMA select PLATFORM_BUS +config SHAKTI_C + bool + select RISCV_ACLINT + select SHAKTI_UART + select SIFIVE_PLIC + select UNIMP + config SIFIVE_E bool select RISCV_ACLINT -- 2.38.1 From: Bin Meng <bmeng@tinylab.org> PLIC is not included in the 'spike' machine. Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221211030829.802437-5-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/spike.c | 1 - 1 file changed, 1 deletion(-) diff --git a/hw/riscv/spike.c b/hw/riscv/spike.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/spike.c +++ b/hw/riscv/spike.c @@ -XXX,XX +XXX,XX @@ * * 0) HTIF Console and Poweroff * 1) CLINT (Timer and IPI) - * 2) PLIC (Platform Level Interrupt Controller) * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, -- 2.38.1 From: Bin Meng <bmeng@tinylab.org> H-mode has been removed since priv spec 1.10. Drop it. Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221211030829.802437-6-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/intc/sifive_plic.h | 1 - hw/intc/sifive_plic.c | 1 - 2 files changed, 2 deletions(-) diff --git a/include/hw/intc/sifive_plic.h b/include/hw/intc/sifive_plic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/sifive_plic.h +++ b/include/hw/intc/sifive_plic.h @@ -XXX,XX +XXX,XX @@ DECLARE_INSTANCE_CHECKER(SiFivePLICState, SIFIVE_PLIC, typedef enum PLICMode { PLICMode_U, PLICMode_S, - PLICMode_H, PLICMode_M } PLICMode; diff --git a/hw/intc/sifive_plic.c b/hw/intc/sifive_plic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/sifive_plic.c +++ b/hw/intc/sifive_plic.c @@ -XXX,XX +XXX,XX @@ static PLICMode char_to_mode(char c) switch (c) { case 'U': return PLICMode_U; case 'S': return PLICMode_S; - case 'H': return PLICMode_H; case 'M': return PLICMode_M; default: error_report("plic: invalid mode '%c'", c); -- 2.38.1 From: Bin Meng <bmeng@tinylab.org> At present the PLIC config parser can only handle legal config string like "MS,MS". However if a config string like ",MS,MS,,MS,MS,," is given the parser won't get the correct configuration. This commit improves the config parser to make it more robust. Signed-off-by: Bin Meng <bmeng@tinylab.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221211030829.802437-7-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/intc/sifive_plic.c | 24 ++++++++++++++++-------- 1 file changed, 16 insertions(+), 8 deletions(-) diff --git a/hw/intc/sifive_plic.c b/hw/intc/sifive_plic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/sifive_plic.c +++ b/hw/intc/sifive_plic.c @@ -XXX,XX +XXX,XX @@ static void sifive_plic_reset(DeviceState *dev) */ static void parse_hart_config(SiFivePLICState *plic) { - int addrid, hartid, modes; + int addrid, hartid, modes, m; const char *p; char c; @@ -XXX,XX +XXX,XX @@ static void parse_hart_config(SiFivePLICState *plic) p = plic->hart_config; while ((c = *p++)) { if (c == ',') { - addrid += ctpop8(modes); - modes = 0; - hartid++; + if (modes) { + addrid += ctpop8(modes); + hartid++; + modes = 0; + } } else { - int m = 1 << char_to_mode(c); + m = 1 << char_to_mode(c); if (modes == (modes | m)) { error_report("plic: duplicate mode '%c' in config: %s", c, plic->hart_config); @@ -XXX,XX +XXX,XX @@ static void parse_hart_config(SiFivePLICState *plic) } if (modes) { addrid += ctpop8(modes); + hartid++; + modes = 0; } - hartid++; plic->num_addrs = addrid; plic->num_harts = hartid; @@ -XXX,XX +XXX,XX @@ static void parse_hart_config(SiFivePLICState *plic) p = plic->hart_config; while ((c = *p++)) { if (c == ',') { - hartid++; + if (modes) { + hartid++; + modes = 0; + } } else { + m = char_to_mode(c); plic->addr_config[addrid].addrid = addrid; plic->addr_config[addrid].hartid = hartid; - plic->addr_config[addrid].mode = char_to_mode(c); + plic->addr_config[addrid].mode = m; + modes |= (1 << m); addrid++; } } -- 2.38.1 From: Bin Meng <bmeng@tinylab.org> The realize() callback has an errp for us to propagate the error up. While we are here, correct the wrong multi-line comment format. Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20221211030829.802437-8-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/intc/sifive_plic.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/hw/intc/sifive_plic.c b/hw/intc/sifive_plic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/sifive_plic.c +++ b/hw/intc/sifive_plic.c @@ -XXX,XX +XXX,XX @@ static void sifive_plic_realize(DeviceState *dev, Error **errp) s->m_external_irqs = g_malloc(sizeof(qemu_irq) * s->num_harts); qdev_init_gpio_out(dev, s->m_external_irqs, s->num_harts); - /* We can't allow the supervisor to control SEIP as this would allow the + /* + * We can't allow the supervisor to control SEIP as this would allow the * supervisor to clear a pending external interrupt which will result in * lost a interrupt in the case a PLIC is attached. The SEIP bit must be * hardware controlled when a PLIC is attached. @@ -XXX,XX +XXX,XX @@ static void sifive_plic_realize(DeviceState *dev, Error **errp) for (i = 0; i < s->num_harts; i++) { RISCVCPU *cpu = RISCV_CPU(qemu_get_cpu(s->hartid_base + i)); if (riscv_cpu_claim_interrupts(cpu, MIP_SEIP) < 0) { - error_report("SEIP already claimed"); - exit(1); + error_setg(errp, "SEIP already claimed"); + return; } } -- 2.38.1 From: Bin Meng <bmeng@tinylab.org> At present the default value of "num-sources" property is zero, which does not make a lot of sense, as in sifive_plic_realize() we see s->bitfield_words is calculated by: s->bitfield_words = (s->num_sources + 31) >> 5; if the we don't configure "num-sources" property its default value zero makes s->bitfield_words zero too, which isn't true because interrupt source 0 still occupies one word. Let's change the default value to 1 meaning that only interrupt source 0 is supported by default and a sanity check in realize(). While we are here, add a comment to describe the exact meaning of this property that the number should include interrupt source 0. Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221211030829.802437-9-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/intc/sifive_plic.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/hw/intc/sifive_plic.c b/hw/intc/sifive_plic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/sifive_plic.c +++ b/hw/intc/sifive_plic.c @@ -XXX,XX +XXX,XX @@ static void sifive_plic_realize(DeviceState *dev, Error **errp) parse_hart_config(s); + if (!s->num_sources) { + error_setg(errp, "plic: invalid number of interrupt sources"); + return; + } + s->bitfield_words = (s->num_sources + 31) >> 5; s->num_enables = s->bitfield_words * s->num_addrs; s->source_priority = g_new0(uint32_t, s->num_sources); @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_sifive_plic = { static Property sifive_plic_properties[] = { DEFINE_PROP_STRING("hart-config", SiFivePLICState, hart_config), DEFINE_PROP_UINT32("hartid-base", SiFivePLICState, hartid_base, 0), - DEFINE_PROP_UINT32("num-sources", SiFivePLICState, num_sources, 0), + /* number of interrupt sources including interrupt source 0 */ + DEFINE_PROP_UINT32("num-sources", SiFivePLICState, num_sources, 1), DEFINE_PROP_UINT32("num-priorities", SiFivePLICState, num_priorities, 0), DEFINE_PROP_UINT32("priority-base", SiFivePLICState, priority_base, 0), DEFINE_PROP_UINT32("pending-base", SiFivePLICState, pending_base, 0), -- 2.38.1 From: Bin Meng <bmeng@tinylab.org> Per chapter 6.5.2 in [1], the number of interupt sources including interrupt source 0 should be 187. [1] PolarFire SoC MSS TRM: https://ww1.microchip.com/downloads/aemDocuments/documents/FPGA/ProductDocuments/ReferenceManuals/PolarFire_SoC_FPGA_MSS_Technical_Reference_Manual_VC.pdf Fixes: 56f6e31e7b7e ("hw/riscv: Initial support for Microchip PolarFire SoC Icicle Kit board") Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Message-Id: <20221211030829.802437-10-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/riscv/microchip_pfsoc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/hw/riscv/microchip_pfsoc.h b/include/hw/riscv/microchip_pfsoc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/riscv/microchip_pfsoc.h +++ b/include/hw/riscv/microchip_pfsoc.h @@ -XXX,XX +XXX,XX @@ enum { #define MICROCHIP_PFSOC_MANAGEMENT_CPU_COUNT 1 #define MICROCHIP_PFSOC_COMPUTE_CPU_COUNT 4 -#define MICROCHIP_PFSOC_PLIC_NUM_SOURCES 185 +#define MICROCHIP_PFSOC_PLIC_NUM_SOURCES 187 #define MICROCHIP_PFSOC_PLIC_NUM_PRIORITIES 7 #define MICROCHIP_PFSOC_PLIC_PRIORITY_BASE 0x04 #define MICROCHIP_PFSOC_PLIC_PENDING_BASE 0x1000 -- 2.38.1 From: Bin Meng <bmeng@tinylab.org> Per chapter 10 in Freedom E310 manuals [1][2][3], E310 G002 and G003 supports 52 interrupt sources while G000 supports 51 interrupt sources. We use the value of G002 and G003, so it is 53 (including source 0). [1] G000 manual: https://sifive.cdn.prismic.io/sifive/4faf3e34-4a42-4c2f-be9e-c77baa4928c7_fe310-g000-manual-v3p2.pdf [2] G002 manual: https://sifive.cdn.prismic.io/sifive/034760b5-ac6a-4b1c-911c-f4148bb2c4a5_fe310-g002-v1p5.pdf [3] G003 manual: https://sifive.cdn.prismic.io/sifive/3af39c59-6498-471e-9dab-5355a0d539eb_fe310-g003-manual.pdf Fixes: eb637edb1241 ("SiFive Freedom E Series RISC-V Machine") Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221211030829.802437-11-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/riscv/sifive_e.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/include/hw/riscv/sifive_e.h b/include/hw/riscv/sifive_e.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/riscv/sifive_e.h +++ b/include/hw/riscv/sifive_e.h @@ -XXX,XX +XXX,XX @@ enum { }; #define SIFIVE_E_PLIC_HART_CONFIG "M" -#define SIFIVE_E_PLIC_NUM_SOURCES 127 +/* + * Freedom E310 G002 and G003 supports 52 interrupt sources while + * Freedom E310 G000 supports 51 interrupt sources. We use the value + * of G002 and G003, so it is 53 (including interrupt source 0). + */ +#define SIFIVE_E_PLIC_NUM_SOURCES 53 #define SIFIVE_E_PLIC_NUM_PRIORITIES 7 #define SIFIVE_E_PLIC_PRIORITY_BASE 0x04 #define SIFIVE_E_PLIC_PENDING_BASE 0x1000 -- 2.38.1 From: Bin Meng <bmeng@tinylab.org> At present magic number is used to create "riscv,ndev" property in the dtb. Let's use the macro SIFIVE_U_PLIC_NUM_SOURCES that is used to instantiate the PLIC model instead. Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221211030829.802437-12-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/sifive_u.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/sifive_u.c +++ b/hw/riscv/sifive_u.c @@ -XXX,XX +XXX,XX @@ static void create_fdt(SiFiveUState *s, const MemMapEntry *memmap, qemu_fdt_setprop_cells(fdt, nodename, "reg", 0x0, memmap[SIFIVE_U_DEV_PLIC].base, 0x0, memmap[SIFIVE_U_DEV_PLIC].size); - qemu_fdt_setprop_cell(fdt, nodename, "riscv,ndev", 0x35); + qemu_fdt_setprop_cell(fdt, nodename, "riscv,ndev", + SIFIVE_U_PLIC_NUM_SOURCES - 1); qemu_fdt_setprop_cell(fdt, nodename, "phandle", plic_phandle); plic_phandle = qemu_fdt_get_phandle(fdt, nodename); g_free(cells); -- 2.38.1 From: Bin Meng <bmeng@tinylab.org> Commit 28d8c281200f ("hw/riscv: virt: Add optional AIA IMSIC support to virt machine") changed the value of VIRT_IRQCHIP_NUM_SOURCES from 127 to 53, which is VIRTIO_NDEV and also used as the value of "riscv,ndev" property in the dtb. Unfortunately this is wrong as VIRT_IRQCHIP_NUM_SOURCES should include interrupt source 0 but "riscv,ndev" does not. While we are here, we also fix the comments of platform bus irq range which is now "64 to 96", but should be "64 to 95", introduced since commit 1832b7cb3f64 ("hw/riscv: virt: Create a platform bus"). Fixes: 28d8c281200f ("hw/riscv: virt: Add optional AIA IMSIC support to virt machine") Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221211030829.802437-13-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/riscv/virt.h | 5 ++--- hw/riscv/virt.c | 3 ++- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/include/hw/riscv/virt.h b/include/hw/riscv/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/riscv/virt.h +++ b/include/hw/riscv/virt.h @@ -XXX,XX +XXX,XX @@ enum { VIRTIO_IRQ = 1, /* 1 to 8 */ VIRTIO_COUNT = 8, PCIE_IRQ = 0x20, /* 32 to 35 */ - VIRT_PLATFORM_BUS_IRQ = 64, /* 64 to 96 */ - VIRTIO_NDEV = 96 /* Arbitrary maximum number of interrupts */ + VIRT_PLATFORM_BUS_IRQ = 64, /* 64 to 95 */ }; #define VIRT_PLATFORM_BUS_NUM_IRQS 32 #define VIRT_IRQCHIP_NUM_MSIS 255 -#define VIRT_IRQCHIP_NUM_SOURCES VIRTIO_NDEV +#define VIRT_IRQCHIP_NUM_SOURCES 96 #define VIRT_IRQCHIP_NUM_PRIO_BITS 3 #define VIRT_IRQCHIP_MAX_GUESTS_BITS 3 #define VIRT_IRQCHIP_MAX_GUESTS ((1U << VIRT_IRQCHIP_MAX_GUESTS_BITS) - 1U) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_socket_plic(RISCVVirtState *s, plic_cells, s->soc[socket].num_harts * sizeof(uint32_t) * 4); qemu_fdt_setprop_cells(mc->fdt, plic_name, "reg", 0x0, plic_addr, 0x0, memmap[VIRT_PLIC].size); - qemu_fdt_setprop_cell(mc->fdt, plic_name, "riscv,ndev", VIRTIO_NDEV); + qemu_fdt_setprop_cell(mc->fdt, plic_name, "riscv,ndev", + VIRT_IRQCHIP_NUM_SOURCES - 1); riscv_socket_fdt_write_id(mc, mc->fdt, plic_name, socket); qemu_fdt_setprop_cell(mc->fdt, plic_name, "phandle", plic_phandles[socket]); -- 2.38.1 From: Bin Meng <bmeng@tinylab.org> At present the SiFive PLIC model "priority-base" expects interrupt priority register base starting from source 1 instead source 0, that's why on most platforms "priority-base" is set to 0x04 except 'opentitan' machine. 'opentitan' should have set "priority-base" to 0x04 too. Note the irq number calculation in sifive_plic_{read,write} is correct as the codes make up for the irq number by adding 1. Let's simply update "priority-base" to start from interrupt source 0 and add a comment to make it crystal clear. Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Message-Id: <20221211030829.802437-14-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/riscv/microchip_pfsoc.h | 2 +- include/hw/riscv/shakti_c.h | 2 +- include/hw/riscv/sifive_e.h | 2 +- include/hw/riscv/sifive_u.h | 2 +- include/hw/riscv/virt.h | 2 +- hw/intc/sifive_plic.c | 5 +++-- 6 files changed, 8 insertions(+), 7 deletions(-) diff --git a/include/hw/riscv/microchip_pfsoc.h b/include/hw/riscv/microchip_pfsoc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/riscv/microchip_pfsoc.h +++ b/include/hw/riscv/microchip_pfsoc.h @@ -XXX,XX +XXX,XX @@ enum { #define MICROCHIP_PFSOC_PLIC_NUM_SOURCES 187 #define MICROCHIP_PFSOC_PLIC_NUM_PRIORITIES 7 -#define MICROCHIP_PFSOC_PLIC_PRIORITY_BASE 0x04 +#define MICROCHIP_PFSOC_PLIC_PRIORITY_BASE 0x00 #define MICROCHIP_PFSOC_PLIC_PENDING_BASE 0x1000 #define MICROCHIP_PFSOC_PLIC_ENABLE_BASE 0x2000 #define MICROCHIP_PFSOC_PLIC_ENABLE_STRIDE 0x80 diff --git a/include/hw/riscv/shakti_c.h b/include/hw/riscv/shakti_c.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/riscv/shakti_c.h +++ b/include/hw/riscv/shakti_c.h @@ -XXX,XX +XXX,XX @@ enum { #define SHAKTI_C_PLIC_NUM_SOURCES 28 /* Excluding Priority 0 */ #define SHAKTI_C_PLIC_NUM_PRIORITIES 2 -#define SHAKTI_C_PLIC_PRIORITY_BASE 0x04 +#define SHAKTI_C_PLIC_PRIORITY_BASE 0x00 #define SHAKTI_C_PLIC_PENDING_BASE 0x1000 #define SHAKTI_C_PLIC_ENABLE_BASE 0x2000 #define SHAKTI_C_PLIC_ENABLE_STRIDE 0x80 diff --git a/include/hw/riscv/sifive_e.h b/include/hw/riscv/sifive_e.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/riscv/sifive_e.h +++ b/include/hw/riscv/sifive_e.h @@ -XXX,XX +XXX,XX @@ enum { */ #define SIFIVE_E_PLIC_NUM_SOURCES 53 #define SIFIVE_E_PLIC_NUM_PRIORITIES 7 -#define SIFIVE_E_PLIC_PRIORITY_BASE 0x04 +#define SIFIVE_E_PLIC_PRIORITY_BASE 0x00 #define SIFIVE_E_PLIC_PENDING_BASE 0x1000 #define SIFIVE_E_PLIC_ENABLE_BASE 0x2000 #define SIFIVE_E_PLIC_ENABLE_STRIDE 0x80 diff --git a/include/hw/riscv/sifive_u.h b/include/hw/riscv/sifive_u.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/riscv/sifive_u.h +++ b/include/hw/riscv/sifive_u.h @@ -XXX,XX +XXX,XX @@ enum { #define SIFIVE_U_PLIC_NUM_SOURCES 54 #define SIFIVE_U_PLIC_NUM_PRIORITIES 7 -#define SIFIVE_U_PLIC_PRIORITY_BASE 0x04 +#define SIFIVE_U_PLIC_PRIORITY_BASE 0x00 #define SIFIVE_U_PLIC_PENDING_BASE 0x1000 #define SIFIVE_U_PLIC_ENABLE_BASE 0x2000 #define SIFIVE_U_PLIC_ENABLE_STRIDE 0x80 diff --git a/include/hw/riscv/virt.h b/include/hw/riscv/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/riscv/virt.h +++ b/include/hw/riscv/virt.h @@ -XXX,XX +XXX,XX @@ enum { #define VIRT_IRQCHIP_MAX_GUESTS_BITS 3 #define VIRT_IRQCHIP_MAX_GUESTS ((1U << VIRT_IRQCHIP_MAX_GUESTS_BITS) - 1U) -#define VIRT_PLIC_PRIORITY_BASE 0x04 +#define VIRT_PLIC_PRIORITY_BASE 0x00 #define VIRT_PLIC_PENDING_BASE 0x1000 #define VIRT_PLIC_ENABLE_BASE 0x2000 #define VIRT_PLIC_ENABLE_STRIDE 0x80 diff --git a/hw/intc/sifive_plic.c b/hw/intc/sifive_plic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/sifive_plic.c +++ b/hw/intc/sifive_plic.c @@ -XXX,XX +XXX,XX @@ static uint64_t sifive_plic_read(void *opaque, hwaddr addr, unsigned size) SiFivePLICState *plic = opaque; if (addr_between(addr, plic->priority_base, plic->num_sources << 2)) { - uint32_t irq = ((addr - plic->priority_base) >> 2) + 1; + uint32_t irq = (addr - plic->priority_base) >> 2; return plic->source_priority[irq]; } else if (addr_between(addr, plic->pending_base, plic->num_sources >> 3)) { @@ -XXX,XX +XXX,XX @@ static void sifive_plic_write(void *opaque, hwaddr addr, uint64_t value, SiFivePLICState *plic = opaque; if (addr_between(addr, plic->priority_base, plic->num_sources << 2)) { - uint32_t irq = ((addr - plic->priority_base) >> 2) + 1; + uint32_t irq = (addr - plic->priority_base) >> 2; if (((plic->num_priorities + 1) & plic->num_priorities) == 0) { /* @@ -XXX,XX +XXX,XX @@ static Property sifive_plic_properties[] = { /* number of interrupt sources including interrupt source 0 */ DEFINE_PROP_UINT32("num-sources", SiFivePLICState, num_sources, 1), DEFINE_PROP_UINT32("num-priorities", SiFivePLICState, num_priorities, 0), + /* interrupt priority register base starting from source 0 */ DEFINE_PROP_UINT32("priority-base", SiFivePLICState, priority_base, 0), DEFINE_PROP_UINT32("pending-base", SiFivePLICState, pending_base, 0), DEFINE_PROP_UINT32("enable-base", SiFivePLICState, enable_base, 0), -- 2.38.1 From: Bin Meng <bmeng@tinylab.org> "hartid-base" and "priority-base" are zero by default. There is no need to initialize them to zero again. Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221211030829.802437-15-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/opentitan.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/hw/riscv/opentitan.c b/hw/riscv/opentitan.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/opentitan.c +++ b/hw/riscv/opentitan.c @@ -XXX,XX +XXX,XX @@ static void lowrisc_ibex_soc_realize(DeviceState *dev_soc, Error **errp) /* PLIC */ qdev_prop_set_string(DEVICE(&s->plic), "hart-config", "M"); - qdev_prop_set_uint32(DEVICE(&s->plic), "hartid-base", 0); qdev_prop_set_uint32(DEVICE(&s->plic), "num-sources", 180); qdev_prop_set_uint32(DEVICE(&s->plic), "num-priorities", 3); - qdev_prop_set_uint32(DEVICE(&s->plic), "priority-base", 0x00); qdev_prop_set_uint32(DEVICE(&s->plic), "pending-base", 0x1000); qdev_prop_set_uint32(DEVICE(&s->plic), "enable-base", 0x2000); qdev_prop_set_uint32(DEVICE(&s->plic), "enable-stride", 32); -- 2.38.1 From: Bin Meng <bmeng@tinylab.org> The pending register upper limit is currently set to plic->num_sources >> 3, which is wrong, e.g.: considering plic->num_sources is 7, the upper limit becomes 0 which fails the range check if reading the pending register at pending_base. Fixes: 1e24429e40df ("SiFive RISC-V PLIC Block") Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221211030829.802437-16-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/intc/sifive_plic.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/hw/intc/sifive_plic.c b/hw/intc/sifive_plic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/sifive_plic.c +++ b/hw/intc/sifive_plic.c @@ -XXX,XX +XXX,XX @@ static uint64_t sifive_plic_read(void *opaque, hwaddr addr, unsigned size) uint32_t irq = (addr - plic->priority_base) >> 2; return plic->source_priority[irq]; - } else if (addr_between(addr, plic->pending_base, plic->num_sources >> 3)) { + } else if (addr_between(addr, plic->pending_base, + (plic->num_sources + 31) >> 3)) { uint32_t word = (addr - plic->pending_base) >> 2; return plic->pending[word]; @@ -XXX,XX +XXX,XX @@ static void sifive_plic_write(void *opaque, hwaddr addr, uint64_t value, sifive_plic_update(plic); } } else if (addr_between(addr, plic->pending_base, - plic->num_sources >> 3)) { + (plic->num_sources + 31) >> 3)) { qemu_log_mask(LOG_GUEST_ERROR, "%s: invalid pending write: 0x%" HWADDR_PRIx "", __func__, addr); -- 2.38.1