From: Alistair Francis <alistair.francis@wdc.com> The following changes since commit f5a2438405d4ae8b62de7c9b39fac0b2155ee544: Merge tag 'pull-qapi-2026-05-21' of https://repo.or.cz/qemu/armbru into staging (2026-05-21 09:00:22 -0400) are available in the Git repository at: https://github.com/alistair23/qemu.git tags/pull-riscv-to-apply-20260522 for you to fetch changes up to b7d87fb10d53a918e9c4a3dfe1fb06ce42c52526: hw/riscv: riscv-iommu: Re-process command queue after clearing CMD_ILL (2026-05-22 09:59:21 +1000) ---------------------------------------------------------------- RISC-V PR for 11.1. * Remove spike as default machine * Deprecate the shakti_c machine * Set MISA.[C|X] based on the selected extensions * Update Maintainers for OpenSBI Firmware * Update OpenSBI to v1.8.1 * Avoid RISCVCPU copy in PMU FDT setup * A collection of specification compliance improvements * Fix Svnapot 64KB pages * Handle source overlap of vector widening reduction instructions * Check interrupt in SiFive UART after txctrl register is written * Fix medeleg[11] read-only zero bit for M-mode ECALL * Fix tail handling for vmv.s.x and vfmv.s.f * Update the local AIA interrupt mask * Add KVM support for Zicbop and BFloat16 extensions * Fix the IOMMU FSC SV32 capability check * Avoid caching PCI device IDs in the IOMMU * Implement Microchip mpfs ioscb PLLs and sysreg clock dividers * Remove the internal CPU riscv_cpu_* arrays * Fix IOCOUNTINH.CY toggle detection * Fix the read of pmpaddr(0-63) CSRs * Make hpmcounterh return the upper 32-bits * Minor fixes and enhancements of RISC-V AIA devices * Re-process IOMMU command queue after clearing CMD_ILL ---------------------------------------------------------------- Abhigyan Kumar (1): target/riscv: Fix medeleg[11] read-only zero bit for M-mode ECALL Alistair Francis (4): target/riscv: Remove spike as default machine target/riscv: Deprecate the shakti_c machine MAINTAINERS: Maintain OpenSBI Firmware target/riscv: Update the local interrupt mask Andrew Jones (1): hw/riscv/riscv-iommu: Fix Svnapot 64KB pages Anton Blanchard (1): target/riscv: rvv: Handle source overlap of vector widening reduction instructions Chengbo Gao (1): hw/riscv/riscv-iommu: Avoid caching PCI device IDs Daniel Henrique Barboza (16): roms/opensbi: Update to v1.8.1 target/riscv/cpu.c: add xlrbr isa_edata_arr[] entry target/riscv/cpu.c: fix smctr/ssctr isa_edata_arr[] order target/riscv: make riscv-qmp-cmds use isa_data_arr[] target/riscv/tcg: treat all exts equally in cpu_disable_priv_spec_isa_exts target/riscv/tcg: use only isa_edata_arr[] in cpu_cfg_ext_get_name() target/riscv/cpu.c: remove riscv_cpu_enable_named_feat() target/riscv: remove riscv_cpu_named_features[] target/riscv/tcg: use isa_edata_arr[] in riscv_cpu_update_misa_x() target/riscv/kvm: use isa_edata_arr[] for unavailable props target/riscv/tcg: use isa_edata_arr[] to enable max exts target/riscv/tcg: use cfg_offset as cpu_set_multi_ext cb opaque target/riscv: do not set defaults in cpu prop callback target/riscv/tcg: use isa_edata_arr[] to create user props target/riscv/cpu: remove riscv_cpu_* arrays target/riscv/csr.c: fix read of pmpaddr(0-63) CSRs Fangyu Yu (1): hw/riscv/riscv-iommu: Fix IOCOUNTINH.CY toggle detection Frank Chang (3): target/riscv: Update MISA.C for Zc* extensions target/riscv: Update MISA.X for non-standard extensions hw/char: Check interrupt after txctrl register is written Guenter Roeck (1): hw: misc: Implement Microchip mpfs ioscb PLLs and sysreg clock dividers Jay Chang (1): hw/riscv: riscv-iommu: Re-process command queue after clearing CMD_ILL Jim Shu (4): hw/intc: riscv_aplic: Fix level trigger IRQ in direct delivery mode hw/intc: riscv_aplic: Add reset API to APLIC hw/intc: riscv_imsic: Add reset API to IMSIC hw/intc: riscv_aplic: add trace events of APLIC read/write function Mohamed Ayman (1): riscv: virt: avoid RISCVCPU copy in PMU FDT setup Portia Stephens (1): target/riscv: Make hpmcounterh return the upper 32-bits Zishun Yi (9): target/riscv: Allow mseccfg access based on ext_zicfilp target/riscv: add Zvknha as an implied extension for Zvknhb target/riscv: Remove unconditional MENVCFG_CDE from mask target/riscv: Fix missing CDE check for scountinhibit target/riscv/pmp: Fix integer overflow in TOR and NA4 address computation target/riscv: Add mseccfg to VMStateDescription target/riscv: clear mseccfg on reset for all dependent extensions hw/riscv/riscv-iommu: fix FSC SV32 capability check hw/riscv/virt-acpi-build: Fix off-by-one error in RIMT ID mapping Zongmin Zhou (2): target/riscv/kvm: add KVM support for Zicbop extension target/riscv/kvm: Add BFloat16 extensions support chen.zhongyao@zte.com.cn (1): target/riscv: Fix tail handling for vmv.s.x and vfmv.s.f MAINTAINERS | 2 + docs/about/deprecated.rst | 21 +- docs/about/removed-features.rst | 14 ++ include/hw/misc/mchp_pfsoc_ioscb.h | 2 + target/riscv/cpu.h | 13 +- target/riscv/helper.h | 4 + hw/char/sifive_uart.c | 1 + hw/intc/riscv_aplic.c | 116 ++++++--- hw/intc/riscv_imsic.c | 19 ++ hw/misc/mchp_pfsoc_ioscb.c | 47 +++- hw/misc/mchp_pfsoc_sysreg.c | 13 + hw/riscv/riscv-iommu-hpm.c | 3 +- hw/riscv/riscv-iommu.c | 96 ++++++-- hw/riscv/shakti_c.c | 1 + hw/riscv/spike.c | 1 - hw/riscv/virt-acpi-build.c | 3 +- hw/riscv/virt.c | 4 +- target/riscv/cpu.c | 327 +++++++++---------------- target/riscv/csr.c | 36 ++- target/riscv/kvm/kvm-cpu.c | 62 +++-- target/riscv/machine.c | 20 ++ target/riscv/pmp.c | 4 +- target/riscv/riscv-qmp-cmds.c | 30 +-- target/riscv/tcg/tcg-cpu.c | 192 +++++++-------- target/riscv/vector_helper.c | 18 ++ target/riscv/insn_trans/trans_rvv.c.inc | 45 ++-- hw/intc/trace-events | 4 + pc-bios/opensbi-riscv32-generic-fw_dynamic.bin | Bin 268752 -> 270384 bytes pc-bios/opensbi-riscv64-generic-fw_dynamic.bin | Bin 273048 -> 275928 bytes roms/opensbi | 2 +- 30 files changed, 613 insertions(+), 487 deletions(-) From: Alistair Francis <alistair.francis@wdc.com> In QEMU 10.0 we deprecated the default spike machine, let's finally remove spike as the default and require users to specify the machine. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Chao Liu <chao.liu.zevorn@gmail.com> Message-ID: <20260430052218.771358-2-alistair.francis@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- docs/about/deprecated.rst | 18 ------------------ docs/about/removed-features.rst | 14 ++++++++++++++ hw/riscv/spike.c | 1 - 3 files changed, 14 insertions(+), 19 deletions(-) diff --git a/docs/about/deprecated.rst b/docs/about/deprecated.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/about/deprecated.rst +++ b/docs/about/deprecated.rst @@ -XXX,XX +XXX,XX @@ better reflects the way this property affects all random data within the device tree blob, not just the ``kaslr-seed`` node. -RISC-V default machine option (since 10.0) -'''''''''''''''''''''''''''''''''''''''''' - -RISC-V defines ``spike`` as the default machine if no machine option is -given in the command line. This happens because ``spike`` is the first -RISC-V machine implemented in QEMU and setting it as default was -convenient at that time. Now we have 7 riscv64 and 6 riscv32 machines -and having ``spike`` as a default is no longer justified. This default -will also promote situations where users think they're running ``virt`` -(the most used RISC-V machine type in 10.0) when in fact they're -running ``spike``. - -Removing the default machine option forces users to always set the machine -they want to use and avoids confusion. Existing users of the ``spike`` -machine must ensure that they're setting the ``spike`` machine in the -command line (``-M spike``). - - Backend options --------------- diff --git a/docs/about/removed-features.rst b/docs/about/removed-features.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/about/removed-features.rst +++ b/docs/about/removed-features.rst @@ -XXX,XX +XXX,XX @@ firmware is available to boot it. It can be replaced by the ``ast2700fc``, another multi-SoC machine based on the newer AST2700 SoCs which are excepted to receive better support in the future. +RISC-V default machine (removed in 11.1) +'''''''''''''''''''''''''''''''''''''''' + +RISC-V used to define ``spike`` as the default machine if no machine option +was given via the command line. This happend because ``spike`` was the first +RISC-V machine implemented in QEMU and setting it as default was +convenient at that time. Now we have 7 riscv64 and 6 riscv32 machines +and having ``spike`` as a default is no longer justified. + +The default machine option has been removed, forcing users to always set the +machine they want to use to avoid confusion. Existing users of the ``spike`` +machine must ensure that they're setting the ``spike`` machine in the +command line (``-M spike``). + linux-user mode CPUs -------------------- diff --git a/hw/riscv/spike.c b/hw/riscv/spike.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/spike.c +++ b/hw/riscv/spike.c @@ -XXX,XX +XXX,XX @@ static void spike_machine_class_init(ObjectClass *oc, const void *data) mc->desc = "RISC-V Spike board"; mc->init = spike_board_init; mc->max_cpus = SPIKE_CPUS_MAX; - mc->is_default = true; mc->default_cpu_type = TYPE_RISCV_CPU_BASE; mc->possible_cpu_arch_ids = riscv_numa_possible_cpu_arch_ids; mc->cpu_index_to_instance_props = riscv_numa_cpu_index_to_props; -- 2.53.0 From: Alistair Francis <alistair.francis@wdc.com> The RISC-V shakti_c machine hasn't had meaningful contributions since 2021 and is currently unmaintained. The machine is scheduled to be removed as it appears to have no users. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Chao Liu <chao.liu.zevorn@gmail.com> Message-ID: <20260430052218.771358-3-alistair.francis@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- docs/about/deprecated.rst | 7 +++++++ hw/riscv/shakti_c.c | 1 + 2 files changed, 8 insertions(+) diff --git a/docs/about/deprecated.rst b/docs/about/deprecated.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/about/deprecated.rst +++ b/docs/about/deprecated.rst @@ -XXX,XX +XXX,XX @@ deprecated; use the new name ``dtb-randomness`` instead. The new name better reflects the way this property affects all random data within the device tree blob, not just the ``kaslr-seed`` node. +RISC-V Shakti machine (since 11.1) +'''''''''''''''''''''''''''''''''' + +The RISC-V ``shakti_c`` machine hasn't had meaningful contributions since 2021 +and is currently unmaintained. The machine is scheduled to be removed as it +appears to have no users. + Backend options --------------- diff --git a/hw/riscv/shakti_c.c b/hw/riscv/shakti_c.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/shakti_c.c +++ b/hw/riscv/shakti_c.c @@ -XXX,XX +XXX,XX @@ static void shakti_c_machine_class_init(ObjectClass *klass, const void *data) mc->init = shakti_c_machine_state_init; mc->default_cpu_type = TYPE_RISCV_CPU_SHAKTI_C; mc->valid_cpu_types = valid_cpu_types; + mc->deprecation_reason = "Currently unmaintained with no known users"; mc->default_ram_id = "riscv.shakti.c.ram"; } -- 2.53.0 From: Frank Chang <frank.chang@sifive.com> MISA.C is set if the following extensions are selected: * Zca and not F. * Zca, Zcf and F (but not D) is specified (RV32 only). * Zca, Zcf and Zcd if D is specified (RV32 only). * Zca, Zcd if D is specified (RV64 only). Therefore, MISA.C must be set according to the Zc* extension rules. Warn the user if RVC is explicitly disabled but MISA.C is required by the rules above. Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Max Chou <max.chou@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260424050509.3935180-2-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 39 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_enable_implied_rules(RISCVCPU *cpu) } } +/* + * MISA.C is set if the following extensions are selected: + * - Zca and not F. + * - Zca, Zcf and F (but not D) is specified on RV32. + * - Zca, Zcf and Zcd if D is specified on RV32. + * - Zca, Zcd if D is specified on RV64. + */ +static void riscv_cpu_update_misa_c(RISCVCPU *cpu) +{ + CPURISCVState *env = &cpu->env; + bool set_misa_c = false; + + if (riscv_has_ext(env, RVC)) { + return; + } + + if (cpu->cfg.ext_zca && !riscv_has_ext(env, RVF)) { + set_misa_c = true; + } else if (riscv_cpu_mxl(env) == MXL_RV32 && + cpu->cfg.ext_zca && cpu->cfg.ext_zcf && + (riscv_has_ext(env, RVD) ? cpu->cfg.ext_zcd : + riscv_has_ext(env, RVF))) { + set_misa_c = true; + } else if (riscv_cpu_mxl(env) == MXL_RV64 && + cpu->cfg.ext_zca && cpu->cfg.ext_zcd) { + set_misa_c = true; + } + + if (set_misa_c) { + if (cpu_misa_ext_is_user_set(RVC)) { + warn_report("RVC mandated by Zca/Zcf/Zcd extensions"); + return; + } + + riscv_cpu_set_misa_ext(env, env->misa_ext | RVC); + } +} + void riscv_tcg_cpu_finalize_features(RISCVCPU *cpu, Error **errp) { CPURISCVState *env = &cpu->env; @@ -XXX,XX +XXX,XX @@ void riscv_tcg_cpu_finalize_features(RISCVCPU *cpu, Error **errp) riscv_cpu_init_implied_exts_rules(); riscv_cpu_enable_implied_rules(cpu); + riscv_cpu_update_misa_c(cpu); riscv_cpu_validate_misa_priv(env, &local_err); if (local_err != NULL) { -- 2.53.0 From: Frank Chang <frank.chang@sifive.com> MISA.X is set if there are any non-standard extensions. We should set MISA.X when any of the vendor extensions is enabled. Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Max Chou <max.chou@sifive.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260424050509.3935180-3-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 1 + target/riscv/tcg/tcg-cpu.c | 15 +++++++++++++++ 2 files changed, 16 insertions(+) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState CPURISCVState; #define RVH RV('H') #define RVG RV('G') #define RVB RV('B') +#define RVX RV('X') extern const uint32_t misa_bits[]; const char *riscv_get_misa_ext_name(uint32_t bit); diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_update_misa_c(RISCVCPU *cpu) } } +/* MISA.X is set when any of the non-standard extensions is enabled. */ +static void riscv_cpu_update_misa_x(RISCVCPU *cpu) +{ + CPURISCVState *env = &cpu->env; + const RISCVCPUMultiExtConfig *arr = riscv_cpu_vendor_exts; + + for (int i = 0; arr[i].name != NULL; i++) { + if (isa_ext_is_enabled(cpu, arr[i].offset)) { + riscv_cpu_set_misa_ext(env, env->misa_ext | RVX); + break; + } + } +} + void riscv_tcg_cpu_finalize_features(RISCVCPU *cpu, Error **errp) { CPURISCVState *env = &cpu->env; @@ -XXX,XX +XXX,XX @@ void riscv_tcg_cpu_finalize_features(RISCVCPU *cpu, Error **errp) riscv_cpu_init_implied_exts_rules(); riscv_cpu_enable_implied_rules(cpu); riscv_cpu_update_misa_c(cpu); + riscv_cpu_update_misa_x(cpu); riscv_cpu_validate_misa_priv(env, &local_err); if (local_err != NULL) { -- 2.53.0 From: Alistair Francis <alistair.francis@wdc.com> Mark the OpenSBI Firmware as maintained by me (Alistair Francis) and add Daniel Henrique Barboza as a reviewer. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20260506234243.1873782-1-alistair.francis@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- MAINTAINERS | 2 ++ 1 file changed, 2 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ S: Supported F: hw/i386/amd_iommu* OpenSBI Firmware +M: Alistair Francis <Alistair.Francis@wdc.com> +R: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> L: qemu-riscv@nongnu.org S: Supported F: pc-bios/opensbi-* -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Update OpenSBI and the pre-built opensbi32 and opensbi64 images to version 1.8.1. We're going for the intermediate/bug fix release 1.8.1 directly due to a PMP related fix that was impacting QEMU profile CPUs. Changelog for v1.8.1: * Typo fix in comments of sbi_hartindex_to_hartid() * Fix hart protection abstraction for platforms without PMP Changelog for v1.8 includes, among other things: - IPI device ratings - SiFive CLINT v2 support - SiFive PL2 cache controller driver - SiFive Extensible Cache (EC) driver - SiFive TMC0 based HSM driver - SiFive SMC0 based system suspend driver - MPXY RPMI mailbox driver for voltage service group - MPXY RPMI mailbox driver for device power service group - MPXY RPMI mailbox driver for performance service group Check out the full release log at [1] for more info. [1] https://github.com/riscv-software-src/opensbi/releases/tag/v1.8 Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260108160825.171794-1-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- .../opensbi-riscv32-generic-fw_dynamic.bin | Bin 268752 -> 270384 bytes .../opensbi-riscv64-generic-fw_dynamic.bin | Bin 273048 -> 275928 bytes roms/opensbi | 2 +- 3 files changed, 1 insertion(+), 1 deletion(-) diff --git a/pc-bios/opensbi-riscv32-generic-fw_dynamic.bin b/pc-bios/opensbi-riscv32-generic-fw_dynamic.bin index XXXXXXX..XXXXXXX 100644 Binary files a/pc-bios/opensbi-riscv32-generic-fw_dynamic.bin and b/pc-bios/opensbi-riscv32-generic-fw_dynamic.bin differ diff --git a/pc-bios/opensbi-riscv64-generic-fw_dynamic.bin b/pc-bios/opensbi-riscv64-generic-fw_dynamic.bin index XXXXXXX..XXXXXXX 100644 Binary files a/pc-bios/opensbi-riscv64-generic-fw_dynamic.bin and b/pc-bios/opensbi-riscv64-generic-fw_dynamic.bin differ diff --git a/roms/opensbi b/roms/opensbi index XXXXXXX..XXXXXXX 160000 --- a/roms/opensbi +++ b/roms/opensbi @@ -1 +1 @@ -Subproject commit a32a91069119e7a5aa31e6bc51d5e00860be3d80 +Subproject commit 74434f255873d74e56cc50aa762d1caf24c099f8 -- 2.53.0 From: Mohamed Ayman <mohamedaymanworkspace@gmail.com> Use a pointer to the hart instead of copying RISCVCPU when passing pmu_avail_ctrs to riscv_pmu_generate_fdt_node(). Signed-off-by: Mohamed Ayman <mohamedaymanworkspace@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260503180252.1122776-1-mohamedaymanworkspace@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_pmu(RISCVVirtState *s) { g_autofree char *pmu_name = g_strdup_printf("/pmu"); MachineState *ms = MACHINE(s); - RISCVCPU hart = s->soc[0].harts[0]; + RISCVCPU *hart = &s->soc[0].harts[0]; qemu_fdt_add_subnode(ms->fdt, pmu_name); qemu_fdt_setprop_string(ms->fdt, pmu_name, "compatible", "riscv,pmu"); - riscv_pmu_generate_fdt_node(ms->fdt, hart.pmu_avail_ctrs, pmu_name); + riscv_pmu_generate_fdt_node(ms->fdt, hart->pmu_avail_ctrs, pmu_name); } static void create_fdt_sockets(RISCVVirtState *s, -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> The Zicfilp extension adds the MLPE field to the mseccfg CSR. According to the RISC-V Privileged Specification, mseccfg exists if any extension that adds a field to it is implemented. Currently, the `have_mseccfg()` predicate function checks for Smepmp, Zkr, and Smmpm, but misses Zicfilp. As a result, if a CPU is configured with `zicfilp=true` but without the other extensions, accessing the mseccfg CSR will incorrectly raise an illegal instruction exception. This patch adds the missing check for `ext_zicfilp` to ensure the CSR is properly accessible when the Zicfilp extension is enabled. This issue was discovered and reported by SpecHunter, an AI-driven architecture specification analysis tool. Link: https://github.com/yizishun/rv-isa-sec/blob/master/output/riscv-isa-manual/pr-2561/qemu.txt Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Reviewed-by: Chao Liu <chao.liu.zevorn@gmail.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260511072705.3015986-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException have_mseccfg(CPURISCVState *env, int csrno) if (riscv_cpu_cfg(env)->ext_smmpm) { return RISCV_EXCP_NONE; } + if (riscv_cpu_cfg(env)->ext_zicfilp) { + return RISCV_EXCP_NONE; + } return RISCV_EXCP_ILLEGAL_INST; } -- 2.53.0 From: Andrew Jones <andrew.jones@oss.qualcomm.com> The Svnapot extension encodes a 64KB leaf PTE by setting PTE_N and storing bits [3:0] of the PPN as a NAPOT size indicator. The IOMMU model wasn't checking PTE_N and therefore was using the raw (NAPOT- encoded) PPN directly in the physical address, yielding an address 32 KB above the correct base. Fix both riscv_iommu_spa_fetch() and pdt_memory_read() by mirroring the Svnapot handling already present in target/riscv/cpu_helper.c: napot_bits = ctz64(ppn) + 1 /* 4 for 64KB */ napot_mask = (1 << napot_bits) - 1 /* 0xF */ phys_base = PPN_PHYS(ppn & ~napot_mask) page_offset = addr & (PPN_PHYS(napot_mask) | (TARGET_PAGE_SIZE - 1)) The spec only defines napot_bits == 4 (64KB); any other value is treated as a reserved encoding. This is a fix, rather than new feature support, because the spec says "IOMMU implementations must support the Svnapot standard extension for NAPOT Translation Contiguity." Fixes: 0c54acb8243d ("hw/riscv: add RISC-V IOMMU base emulation") Cc: qemu-stable@nongnu.org Signed-off-by: Andrew Jones <andrew.jones@oss.qualcomm.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Nutty Liu <nutty.liu@hotmail.com> Reviewed-by: Tomasz Jeznach <tjeznach@rivosinc.com> Message-ID: <20260508205129.377032-1-andrew.jones@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu.c | 44 ++++++++++++++++++++++++++++++++++++++---- 1 file changed, 40 insertions(+), 4 deletions(-) diff --git a/hw/riscv/riscv-iommu.c b/hw/riscv/riscv-iommu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.c +++ b/hw/riscv/riscv-iommu.c @@ -XXX,XX +XXX,XX @@ static bool riscv_iommu_msi_check(RISCVIOMMUState *s, RISCVIOMMUContext *ctx, return true; } +/* Returns the NAPOT page mask, or 0 for reserved encodings. */ +static hwaddr riscv_iommu_napot_page_mask(hwaddr ppn, hwaddr addr, hwaddr *out) +{ + int napot_bits = ctz64(ppn) + 1; + hwaddr napot_mask, page_mask; + + /* The spec only defines 64KB (napot_bits == 4) */ + if (napot_bits != 4) { + return 0; + } + + napot_mask = (1ULL << napot_bits) - 1; + page_mask = PPN_PHYS(napot_mask) | (TARGET_PAGE_SIZE - 1); + + *out = PPN_PHYS(ppn & ~napot_mask) | (addr & page_mask); + + return page_mask; +} + /* * RISCV IOMMU Address Translation Lookup - Page Table Walk * @@ -XXX,XX +XXX,XX @@ static int riscv_iommu_spa_fetch(RISCVIOMMUState *s, RISCVIOMMUContext *ctx, } else { /* Leaf PTE, translation completed. */ sc[pass].step = sc[pass].levels; - base = PPN_PHYS(ppn) | (addr & ((1ULL << va_skip) - 1)); - /* Update address mask based on smallest translation granularity */ - iotlb->addr_mask &= (1ULL << va_skip) - 1; + + if (pte & PTE_N) { + hwaddr mask = riscv_iommu_napot_page_mask(ppn, addr, &base); + + if (!mask) { + break; + } + iotlb->addr_mask &= mask; + } else { + base = PPN_PHYS(ppn) | (addr & ((1ULL << va_skip) - 1)); + /* Update address mask based on smallest translation granularity */ + iotlb->addr_mask &= (1ULL << va_skip) - 1; + } + /* Continue with S-Stage translation? */ if (pass && sc[0].step != sc[0].levels) { pass = S_STAGE; @@ -XXX,XX +XXX,XX @@ static MemTxResult pdt_memory_read(RISCVIOMMUState *s, return MEMTX_ACCESS_ERROR; /* Misaligned PPN */ } else { /* Leaf PTE, translation completed. */ - base = PPN_PHYS(ppn) | (addr & ((1ULL << va_skip) - 1)); + if (pte & PTE_N) { + if (!riscv_iommu_napot_page_mask(ppn, addr, &base)) { + return MEMTX_ACCESS_ERROR; + } + } else { + base = PPN_PHYS(ppn) | (addr & ((1ULL << va_skip) - 1)); + } break; } -- 2.53.0 From: Anton Blanchard <antonb@tenstorrent.com> Widening reductions read vs2 as a vector of SEW elements and vs1[0] as a scalar of 2*SEW. The ISA does not allow the same vector register to be read with different EEWs, so they must not overlap. vs1 is read as a scalar from element 0, so it is treated as a single vector register (independent of LMUL) when checking overlap. Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3208 Signed-off-by: Anton Blanchard <antonb@tenstorrent.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260417080328.31918-1-antonb@tenstorrent.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/insn_trans/trans_rvv.c.inc | 1 + 1 file changed, 1 insertion(+) diff --git a/target/riscv/insn_trans/trans_rvv.c.inc b/target/riscv/insn_trans/trans_rvv.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_rvv.c.inc +++ b/target/riscv/insn_trans/trans_rvv.c.inc @@ -XXX,XX +XXX,XX @@ GEN_OPIVV_TRANS(vredxor_vs, reduction_check) static bool reduction_widen_check(DisasContext *s, arg_rmrr *a) { return reduction_check(s, a) && (s->sew < MO_64) && + !is_overlapped(a->rs1, 1, a->rs2, 1 << MAX(s->lmul, 0)) && ((s->sew + 1) <= (s->cfg_ptr->elen >> 4)); } -- 2.53.0 From: Frank Chang <frank.chang@sifive.com> It's possible that the transmit watermark level (txctrl.txcnt) is updated when the user writes to txctrl register, which may decrease the transmit watermark level to less than the number of entries in the transmit FIFO. In such a case, the interrupt should be raised so we need to call sifive_uart_update_irq() to check and update interrupt when txctrl register is written. Otherwise, the interrupt will have to be delayed until next TX FIFO transmission is processed. Suggested-by: Chao Liu <chao.liu.zevorn@gmail.com> Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260513030503.3665414-1-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/char/sifive_uart.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/char/sifive_uart.c b/hw/char/sifive_uart.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/sifive_uart.c +++ b/hw/char/sifive_uart.c @@ -XXX,XX +XXX,XX @@ sifive_uart_write(void *opaque, hwaddr addr, if (SIFIVE_UART_TXEN(s->txctrl) && !fifo8_is_empty(&s->tx_fifo)) { sifive_uart_trigger_tx_fifo(s); } + sifive_uart_update_irq(s); return; case SIFIVE_UART_RXCTRL: s->rxctrl = val64; -- 2.53.0 From: Abhigyan Kumar <314abh@gmail.com> RISC-V Privileged Specification 3.1.8 (Machine Trap Delegation Registers (medeleg and mideleg)) mentions: "For exceptions that cannot occur in less privileged modes, the corresponding medeleg bits should be read-only zero. In particular, medeleg[11] is read-only zero." QEMU incorrectly included RISCV_EXCP_M_ECALL in DELEGABLE_EXCPS. It allowed the 11th bit to be written and read as set. Fixed by removing it from the DELEGABLE_EXCPS mask, adhering to the specification. Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3438 Signed-off-by: Abhigyan Kumar <314abh@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260427060849.749179-2-314abh@gmail.com> [ Changes by AF: - Remove comment ] Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 1 - 1 file changed, 1 deletion(-) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static const uint64_t all_ints = M_MODE_INTERRUPTS | S_MODE_INTERRUPTS | (1ULL << (RISCV_EXCP_U_ECALL)) | \ (1ULL << (RISCV_EXCP_S_ECALL)) | \ (1ULL << (RISCV_EXCP_VS_ECALL)) | \ - (1ULL << (RISCV_EXCP_M_ECALL)) | \ (1ULL << (RISCV_EXCP_INST_PAGE_FAULT)) | \ (1ULL << (RISCV_EXCP_LOAD_PAGE_FAULT)) | \ (1ULL << (RISCV_EXCP_STORE_PAGE_FAULT)) | \ -- 2.53.0 From: "chen.zhongyao@zte.com.cn" <chen.zhongyao@zte.com.cn> The risc-v vector spec defines vmv.s.x and vfmv.s.f as writing element 0 of the destination register while the remaining destination elements follow the current tail policy. When QEMU runs with rvv_ta_all_1s enabled, those elements must therefore become all 1s. QEMU handled both instructions as translation-time special cases that directly wrote vd[0] and skipped the usual tail processing. As a result, vmv.s.x and vfmv.s.f left the remaining destination elements unchanged instead of applying the configured tail policy. Fix this by routing both instructions through a helper that writes vd[0] and then treats the rest of the destination register as tail, reusing the existing agnostic-element fill logic. Signed-off-by: Zhongyao Chen <chen.zhongyao@zte.com.cn> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <202605061005.646A537u037157@mse-fl1.zte.com.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/helper.h | 4 +++ target/riscv/vector_helper.c | 18 ++++++++++ target/riscv/insn_trans/trans_rvv.c.inc | 44 ++++++++----------------- 3 files changed, 36 insertions(+), 30 deletions(-) diff --git a/target/riscv/helper.h b/target/riscv/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/helper.h +++ b/target/riscv/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_4(vmv_v_x_b, void, ptr, i64, env, i32) DEF_HELPER_4(vmv_v_x_h, void, ptr, i64, env, i32) DEF_HELPER_4(vmv_v_x_w, void, ptr, i64, env, i32) DEF_HELPER_4(vmv_v_x_d, void, ptr, i64, env, i32) +DEF_HELPER_4(vset_velem0_b, void, ptr, i64, env, i32) +DEF_HELPER_4(vset_velem0_h, void, ptr, i64, env, i32) +DEF_HELPER_4(vset_velem0_w, void, ptr, i64, env, i32) +DEF_HELPER_4(vset_velem0_d, void, ptr, i64, env, i32) DEF_HELPER_6(vsaddu_vv_b, void, ptr, ptr, ptr, ptr, env, i32) DEF_HELPER_6(vsaddu_vv_h, void, ptr, ptr, ptr, ptr, env, i32) diff --git a/target/riscv/vector_helper.c b/target/riscv/vector_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/vector_helper.c +++ b/target/riscv/vector_helper.c @@ -XXX,XX +XXX,XX @@ GEN_VEXT_VMV_VX(vmv_v_x_h, int16_t, H2) GEN_VEXT_VMV_VX(vmv_v_x_w, int32_t, H4) GEN_VEXT_VMV_VX(vmv_v_x_d, int64_t, H8) +#define GEN_VEXT_SET_VELEM0(NAME, ETYPE, H) \ +void HELPER(NAME)(void *vd, uint64_t s1, CPURISCVState *env, \ + uint32_t desc) \ +{ \ + uint32_t esz = sizeof(ETYPE); \ + uint32_t vlenb = riscv_cpu_cfg(env)->vlenb; \ + uint32_t vta = vext_vta(desc); \ + \ + *((ETYPE *)vd + H(0)) = (ETYPE)s1; \ + /* Treat every element past vd[0] as tail for scalar-to-vector moves. */ \ + vext_set_elems_1s(vd, vta, esz, vlenb); \ +} + +GEN_VEXT_SET_VELEM0(vset_velem0_b, int8_t, H1) +GEN_VEXT_SET_VELEM0(vset_velem0_h, int16_t, H2) +GEN_VEXT_SET_VELEM0(vset_velem0_w, int32_t, H4) +GEN_VEXT_SET_VELEM0(vset_velem0_d, int64_t, H8) + #define GEN_VEXT_VMERGE_VV(NAME, ETYPE, H) \ void HELPER(NAME)(void *vd, void *v0, void *vs1, void *vs2, \ CPURISCVState *env, uint32_t desc) \ diff --git a/target/riscv/insn_trans/trans_rvv.c.inc b/target/riscv/insn_trans/trans_rvv.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_rvv.c.inc +++ b/target/riscv/insn_trans/trans_rvv.c.inc @@ -XXX,XX +XXX,XX @@ static void vec_element_loadi(DisasContext *s, TCGv_i64 dest, load_element(dest, tcg_env, endian_ofs(s, vreg, idx), s->sew, sign); } -/* Integer Scalar Move Instruction */ +typedef void gen_helper_vset_velem0(TCGv_ptr, TCGv_i64, TCGv_env, TCGv_i32); -static void store_element(TCGv_i64 val, TCGv_ptr base, - int ofs, int sew) +static void vec_element_storei_tail(DisasContext *s, int vreg, TCGv_i64 val) { - switch (sew) { - case MO_8: - tcg_gen_st8_i64(val, base, ofs); - break; - case MO_16: - tcg_gen_st16_i64(val, base, ofs); - break; - case MO_32: - tcg_gen_st32_i64(val, base, ofs); - break; - case MO_64: - tcg_gen_st_i64(val, base, ofs); - break; - default: - g_assert_not_reached(); - } -} + static gen_helper_vset_velem0 * const fns[4] = { + gen_helper_vset_velem0_b, gen_helper_vset_velem0_h, + gen_helper_vset_velem0_w, gen_helper_vset_velem0_d, + }; + TCGv_ptr dest = tcg_temp_new_ptr(); + uint32_t data = FIELD_DP32(0, VDATA, VTA, s->vta); + TCGv_i32 desc = tcg_constant_i32(simd_desc(s->cfg_ptr->vlenb, + s->cfg_ptr->vlenb, data)); -/* - * Store vreg[idx] = val. - * The index must be in range of VLMAX. - */ -static void vec_element_storei(DisasContext *s, int vreg, - int idx, TCGv_i64 val) -{ - store_element(val, tcg_env, endian_ofs(s, vreg, idx), s->sew); + tcg_gen_addi_ptr(dest, tcg_env, vreg_ofs(s, vreg)); + fns[s->sew](dest, val, tcg_env, desc); } /* vmv.x.s rd, vs2 # x[rd] = vs2[0] */ @@ -XXX,XX +XXX,XX @@ static bool trans_vmv_s_x(DisasContext *s, arg_vmv_s_x *a) */ s1 = get_gpr(s, a->rs1, EXT_NONE); tcg_gen_ext_tl_i64(t1, s1); - vec_element_storei(s, a->rd, 0, t1); + vec_element_storei_tail(s, a->rd, t1); gen_set_label(over); tcg_gen_movi_tl(cpu_vstart, 0); finalize_rvv_inst(s); @@ -XXX,XX +XXX,XX @@ static bool trans_vfmv_s_f(DisasContext *s, arg_vfmv_s_f *a) t1 = tcg_temp_new_i64(); do_nanbox(s, t1, cpu_fpr[a->rs1]); - vec_element_storei(s, a->rd, 0, t1); + vec_element_storei_tail(s, a->rd, t1); gen_set_label(over); tcg_gen_movi_tl(cpu_vstart, 0); -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> The RISC-V unpriv specification (zvk.adoc) states that "Zvknhb implies Zvknha". This means that enabling Zvknhb should automatically enable Zvknha. Add Zvknha to ZVKNHB_IMPLIED to ensure the dependency is correctly enforced. This issue was discovered and reported by SpecHunter, an AI-driven architecture specification analysis tool. Link:https://github.com/yizishun/rv-isa-sec/blob/master/output/riscv-isa-manual/pr-2635/qemu.txt Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260511051736.2916225-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static RISCVCPUImpliedExtsRule ZVKNG_IMPLIED = { static RISCVCPUImpliedExtsRule ZVKNHB_IMPLIED = { .ext = CPU_CFG_OFFSET(ext_zvknhb), .implied_multi_exts = { - CPU_CFG_OFFSET(ext_zve64x), + CPU_CFG_OFFSET(ext_zve64x), CPU_CFG_OFFSET(ext_zvknha), RISCV_IMPLIED_EXTS_RULE_END }, -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> Currently, the MENVCFG_CDE (Counter Delegation Enable) bit is unconditionally included in the base write mask for CSR_MENVCFG. This make the subsequent conditional check `(cfg->ext_smcdeleg ? MENVCFG_CDE : 0)` completely ineffective, as a bitwise OR cannot clear a bit that is already set. Fix this by removing MENVCFG_CDE from the initial base mask. The bit will now only be writable when explicitly granted by the `ext_smcdeleg` configuration. This issue was discovered and reported by SpecHunter, an AI-driven architecture specification analysis tool. Link: https://github.com/yizishun/rv-isa-sec/blob/master/output/riscv-isa-manual/pr-2601/qemu.txt Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260511040534.2862443-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException write_menvcfg(CPURISCVState *env, int csrno, { const RISCVCPUConfig *cfg = riscv_cpu_cfg(env); uint64_t mask = MENVCFG_FIOM | MENVCFG_CBIE | MENVCFG_CBCFE | - MENVCFG_CBZE | MENVCFG_CDE; + MENVCFG_CBZE; bool stce_changed = false; if (riscv_cpu_mxl(env) == MXL_RV64) { -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> According to the RISC-V smcdeleg specification: "When menvcfg.CDE=0, attempts to access scountinhibit raise an illegal-instruction exception." The current implementation of scountinhibit_pred() only checks the hardware extensions (ext_ssccfg, ext_smcdeleg) and virtualization status, but completely misses the runtime environment configuration check (menvcfg.CDE). This allows S-mode to access scountinhibit even when the M-mode has explicitly disabled counter delegation. This issue was discovered by the SpecHunter tool (https://github.com/yizishun/rv-isa-sec/blob/master/output/riscv-isa-manual/pr-2571/qemu.txt). Fixes: 6247dc2ef70b ("target/riscv: Add counter delegation/configuration support") Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260508174917.371667-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException scountinhibit_pred(CPURISCVState *env, int csrno) return RISCV_EXCP_ILLEGAL_INST; } + if (!get_field(env->menvcfg, MENVCFG_CDE)) { + return RISCV_EXCP_ILLEGAL_INST; + } + if (env->virt_enabled) { return RISCV_EXCP_VIRT_INSTRUCTION_FAULT; } -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> According to the RISC-V Privileged Manual: "The Sv32 page-based virtual-memory scheme described in sv32 supports 34-bit physical addresses for RV32, so the PMP scheme must support addresses wider than XLEN for RV32." However, the current QEMU implementation uses `target_ulong` (which resolves to `uint32_t` on RV32) for PMP address variables. When shifting these addresses left (e.g., `this_addr << 2`), an integer overflow occurs, truncating the high bits of the 34-bit physical address. Fix this issue by changing the types of PMP address variables (`this_addr` and `prev_addr`) to `hwaddr`. This issue was discovered and reported by SpecHunter, an AI-driven architecture specification analysis tool. Link: https://github.com/yizishun/rv-isa-sec/blob/master/output/riscv-isa-manual/pr-2472/qemu.txt Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260511102627.3120140-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/pmp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/riscv/pmp.c b/target/riscv/pmp.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/pmp.c +++ b/target/riscv/pmp.c @@ -XXX,XX +XXX,XX @@ static void pmp_decode_napot(hwaddr a, hwaddr *sa, hwaddr *ea) void pmp_update_rule_addr(CPURISCVState *env, uint32_t pmp_index) { uint8_t this_cfg = env->pmp_state.pmp[pmp_index].cfg_reg; - target_ulong this_addr = env->pmp_state.pmp[pmp_index].addr_reg; - target_ulong prev_addr = 0u; + hwaddr this_addr = env->pmp_state.pmp[pmp_index].addr_reg; + hwaddr prev_addr = 0u; hwaddr sa = 0u; hwaddr ea = 0u; int g = pmp_get_granularity_g(env); -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> Currently, the Machine Security Configuration Register (mseccfg) was missing from the live migration state. This omission causes the register to be reset to zero on the destination host after migration. Fixed by adding vmstate_mseccfg subsection This vulnerability was discovered and reported by SpecHunter, an AI-driven architecture specification analysis tool. Link: https://github.com/yizishun/rv-isa-sec/blob/a22e4459cd026ae970791dfbd9cfe5d110fbd46b/output/riscv-isa-manual/pr-1879/qemu.txt#L121 Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260511124828.3210477-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/machine.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/target/riscv/machine.c b/target/riscv/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/machine.c +++ b/target/riscv/machine.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_sstc = { } }; +static bool mseccfg_needed(void *opaque) +{ + RISCVCPU *cpu = opaque; + + return cpu->cfg.ext_smepmp || cpu->cfg.ext_zkr + || cpu->cfg.ext_smmpm || cpu->cfg.ext_zicfilp; +} + +static const VMStateDescription vmstate_mseccfg = { + .name = "cpu/mseccfg", + .version_id = 1, + .minimum_version_id = 1, + .needed = mseccfg_needed, + .fields = (const VMStateField[]) { + VMSTATE_UINTTL(env.mseccfg, RISCVCPU), + VMSTATE_END_OF_LIST() + } +}; + const VMStateDescription vmstate_riscv_cpu = { .name = "cpu", .version_id = 11, @@ -XXX,XX +XXX,XX @@ const VMStateDescription vmstate_riscv_cpu = { &vmstate_ssp, &vmstate_ctr, &vmstate_sstc, + &vmstate_mseccfg, NULL } }; -- 2.53.0 From: Alistair Francis <alistair.francis@wdc.com> The RISC-V spec describes bits 0-15 as standard fixed interrupts. The AIA spec on the other hand describes bits 0-12 as standard fixed interrupts. This conflict causes issues for us as we don't dynamically determine if AIA is enabled when setting the *delegable_ints consts. This means currently we incorrectly treat the LCOFIP bit as delegable, even if AIA is disabled, which is incorrect (see the issues mentioned below). The AIA spec indicates that implementations can determine which bits of 13-63 in mvien are writable, so let's just make it bits 15-63 to match the main spec. Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3133 Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3134 Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3135 Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3138 Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3140 Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260513051841.1671987-1-alistair.francis@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException write_stimecmph(CPURISCVState *env, int csrno, #define VSTOPI_NUM_SRCS 5 /* - * All core local interrupts except the fixed ones 0:12. This macro is for + * All core local interrupts except the fixed ones 0:15. This macro is for * virtual interrupts logic so please don't change this to avoid messing up * the whole support, For reference see AIA spec: `5.3 Interrupt filtering and * virtual interrupts for supervisor level` and `6.3.2 Virtual interrupts for * VS level`. */ -#define LOCAL_INTERRUPTS (~0x1FFFULL) +#define LOCAL_INTERRUPTS (~0xFFFFULL) static const uint64_t delegable_ints = S_MODE_INTERRUPTS | VS_MODE_INTERRUPTS | MIP_LCOFIP; -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> Currently, the `mseccfg` CSR is only cleared to 0 during reset if the `ext_smepmp` is enabled. However, this register is now shared by several other extensions such as `zkr`, `smmpm`, and `zicfilp`. Fix by clearing `mseccfg` if any dependent extension is present, and adjusting the relevant comments. This vulnerability was discovered and reported by SpecHunter, an AI-driven architecture specification analysis tool. Link: https://github.com/yizishun/rv-isa-sec/blob/master/output/riscv-svvptc/pr-134/qemu.txt Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260512052240.330815-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_reset_hold(Object *obj, ResetType type) /* * Clear mseccfg and unlock all the PMP entries upon reset. - * This is allowed as per the priv and smepmp specifications - * and is needed to clear stale entries across reboots. + * This is required as per the priv, smepmp, and other security + * extension specifications that share this CSR, and is needed + * to clear stale entries across reboots. */ - if (riscv_cpu_cfg(env)->ext_smepmp) { + if (riscv_cpu_cfg(env)->ext_smepmp || + riscv_cpu_cfg(env)->ext_zkr || + riscv_cpu_cfg(env)->ext_smmpm || + riscv_cpu_cfg(env)->ext_zicfilp) { env->mseccfg = 0; } -- 2.53.0 From: Zongmin Zhou <zhouzongmin@kylinos.cn> When the Zicbop extension is available expose it to the KVM guest. Also read and validate cbop_blocksize from the host via KVM interface. Signed-off-by: Zongmin Zhou <zhouzongmin@kylinos.cn> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <9e388aa9984ea9d3d0c85e1630c9195023938952.1778653159.git.zhouzongmin@kylinos.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/kvm/kvm-cpu.c | 34 ++++++++++++++++++++++++++++++++-- 1 file changed, 32 insertions(+), 2 deletions(-) diff --git a/target/riscv/kvm/kvm-cpu.c b/target/riscv/kvm/kvm-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/kvm/kvm-cpu.c +++ b/target/riscv/kvm/kvm-cpu.c @@ -XXX,XX +XXX,XX @@ static void kvm_cpu_csr_set_u64(RISCVCPU *cpu, KVMCPUConfig *csr_cfg, static KVMCPUConfig kvm_multi_ext_cfgs[] = { KVM_EXT_CFG("zicbom", ext_zicbom, KVM_RISCV_ISA_EXT_ZICBOM), + KVM_EXT_CFG("zicbop", ext_zicbop, KVM_RISCV_ISA_EXT_ZICBOP), KVM_EXT_CFG("zicboz", ext_zicboz, KVM_RISCV_ISA_EXT_ZICBOZ), KVM_EXT_CFG("ziccrse", ext_ziccrse, KVM_RISCV_ISA_EXT_ZICCRSE), KVM_EXT_CFG("zicntr", ext_zicntr, KVM_RISCV_ISA_EXT_ZICNTR), @@ -XXX,XX +XXX,XX @@ static KVMCPUConfig kvm_cboz_blocksize = { .kvm_reg_id = KVM_REG_RISCV_CONFIG_REG(zicboz_block_size) }; +static KVMCPUConfig kvm_cbop_blocksize = { + .name = "cbop_blocksize", + .offset = CPU_CFG_OFFSET(cbop_blocksize), + .kvm_reg_id = KVM_REG_RISCV_CONFIG_REG(zicbop_block_size) +}; + static KVMCPUConfig kvm_v_vlenb = { .name = "vlenb", .offset = CPU_CFG_OFFSET(vlenb), @@ -XXX,XX +XXX,XX @@ static void kvm_riscv_init_cfg(RISCVCPU *cpu, KVMScratchCPU *kvmcpu) kvm_riscv_read_cbomz_blksize(cpu, kvmcpu, &kvm_cbom_blocksize); } + if (cpu->cfg.ext_zicbop) { + kvm_riscv_read_cbomz_blksize(cpu, kvmcpu, &kvm_cbop_blocksize); + } + if (cpu->cfg.ext_zicboz) { kvm_riscv_read_cbomz_blksize(cpu, kvmcpu, &kvm_cboz_blocksize); } @@ -XXX,XX +XXX,XX @@ void riscv_kvm_cpu_finalize_features(RISCVCPU *cpu, Error **errp) int ret; /* short-circuit without spinning the scratch CPU */ - if (!cpu->cfg.ext_zicbom && !cpu->cfg.ext_zicboz && - !riscv_has_ext(env, RVV)) { + if (!cpu->cfg.ext_zicbom && !cpu->cfg.ext_zicbop && + !cpu->cfg.ext_zicboz && !riscv_has_ext(env, RVV)) { return; } @@ -XXX,XX +XXX,XX @@ void riscv_kvm_cpu_finalize_features(RISCVCPU *cpu, Error **errp) } } + if (cpu->cfg.ext_zicbop && + riscv_cpu_option_set(kvm_cbop_blocksize.name)) { + + reg.id = KVM_RISCV_REG_ID_ULONG(KVM_REG_RISCV_CONFIG, + kvm_cbop_blocksize.kvm_reg_id); + reg.addr = (uint64_t)&val; + ret = ioctl(kvmcpu.cpufd, KVM_GET_ONE_REG, &reg); + if (ret != 0) { + error_setg_errno(errp, errno, "Unable to read cbop_blocksize"); + return; + } + + if (cpu->cfg.cbop_blocksize != val) { + error_setg(errp, "Unable to set cbop_blocksize to a different " + "value than the host (%lu)", val); + return; + } + } + /* Users are setting vlen, not vlenb */ if (riscv_has_ext(env, RVV) && riscv_cpu_option_set("vlen")) { if (!kvm_v_vlenb.supported) { -- 2.53.0 From: Zongmin Zhou <zhouzongmin@kylinos.cn> Expose the BFloat16 extensions (Zfbfmin, Zvfbfmin, Zvfbfwma) to KVM guests when available in hardware. Signed-off-by: Zongmin Zhou <zhouzongmin@kylinos.cn> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <1258febb0eeb4ee286eb88f70b077a7f1ece507f.1778653159.git.zhouzongmin@kylinos.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/kvm/kvm-cpu.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/target/riscv/kvm/kvm-cpu.c b/target/riscv/kvm/kvm-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/kvm/kvm-cpu.c +++ b/target/riscv/kvm/kvm-cpu.c @@ -XXX,XX +XXX,XX @@ static KVMCPUConfig kvm_multi_ext_cfgs[] = { KVM_EXT_CFG("zacas", ext_zacas, KVM_RISCV_ISA_EXT_ZACAS), KVM_EXT_CFG("zawrs", ext_zawrs, KVM_RISCV_ISA_EXT_ZAWRS), KVM_EXT_CFG("zfa", ext_zfa, KVM_RISCV_ISA_EXT_ZFA), + KVM_EXT_CFG("zfbfmin", ext_zfbfmin, KVM_RISCV_ISA_EXT_ZFBFMIN), KVM_EXT_CFG("zfh", ext_zfh, KVM_RISCV_ISA_EXT_ZFH), KVM_EXT_CFG("zfhmin", ext_zfhmin, KVM_RISCV_ISA_EXT_ZFHMIN), KVM_EXT_CFG("zba", ext_zba, KVM_RISCV_ISA_EXT_ZBA), @@ -XXX,XX +XXX,XX @@ static KVMCPUConfig kvm_multi_ext_cfgs[] = { KVM_EXT_CFG("zvbc", ext_zvbc, KVM_RISCV_ISA_EXT_ZVBC), KVM_EXT_CFG("zvfh", ext_zvfh, KVM_RISCV_ISA_EXT_ZVFH), KVM_EXT_CFG("zvfhmin", ext_zvfhmin, KVM_RISCV_ISA_EXT_ZVFHMIN), + KVM_EXT_CFG("zvfbfmin", ext_zvfbfmin, KVM_RISCV_ISA_EXT_ZVFBFMIN), + KVM_EXT_CFG("zvfbfwma", ext_zvfbfwma, KVM_RISCV_ISA_EXT_ZVFBFWMA), KVM_EXT_CFG("zvkb", ext_zvkb, KVM_RISCV_ISA_EXT_ZVKB), KVM_EXT_CFG("zvkg", ext_zvkg, KVM_RISCV_ISA_EXT_ZVKG), KVM_EXT_CFG("zvkned", ext_zvkned, KVM_RISCV_ISA_EXT_ZVKNED), -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> Fix a mode-to-capability comparison error in riscv_iommu_validate_device_ctx. The code was comparing fsc_mode (a value) against a capability bitmask, making the SV32 support check ineffective. This issue was discovered and reported by SpecHunter, an AI-driven architecture specification analysis tool. Link: https://github.com/yizishun/rv-isa-sec/blob/master/output/riscv-iommu/pr-694/qemu.txt Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260511080904.3049446-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/riscv/riscv-iommu.c b/hw/riscv/riscv-iommu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.c +++ b/hw/riscv/riscv-iommu.c @@ -XXX,XX +XXX,XX @@ static bool riscv_iommu_validate_device_ctx(RISCVIOMMUState *s, } if (ctx->tc & RISCV_IOMMU_DC_TC_SXL) { - if (fsc_mode == RISCV_IOMMU_CAP_SV32 && + if (fsc_mode == RISCV_IOMMU_DC_FSC_IOSATP_MODE_SV32 && !(s->cap & RISCV_IOMMU_CAP_SV32)) { return false; } -- 2.53.0 From: Chengbo Gao <gaochengbo@bosc.ac.cn> PCI bus numbers may still be unassigned when QEMU initializes a PCI device's bus-master address space. For devices behind bridges, pci_bus_num() can return 0 at that point because the guest has not yet programmed the bridge Secondary Bus Number register. The RISC-V IOMMU currently stores a fixed device_id in RISCVIOMMUSpace when the address space is created. If the guest later enumerates the device on a non-zero bus, DMA translation still uses the stale device_id and may look up the wrong device context in the DDT. Store the stable PCIBus pointer and devfn in RISCVIOMMUSpace instead, and compute the device_id from the current bus number when it is needed. This keeps DMA translation and ATS invalidation in sync with guest PCI bus enumeration. Signed-off-by: Chengbo Gao <gaochengbo@bosc.ac.cn> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260514020637.2819308-1-gaochengbo@bosc.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu.c | 40 +++++++++++++++++++++++++--------------- 1 file changed, 25 insertions(+), 15 deletions(-) diff --git a/hw/riscv/riscv-iommu.c b/hw/riscv/riscv-iommu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.c +++ b/hw/riscv/riscv-iommu.c @@ -XXX,XX +XXX,XX @@ struct RISCVIOMMUSpace { IOMMUMemoryRegion iova_mr; /* IOVA memory region for attached device */ AddressSpace iova_as; /* IOVA address space for attached device */ RISCVIOMMUState *iommu; /* Managing IOMMU device state */ - uint32_t devid; /* Requester identifier, AKA device_id */ + PCIBus *bus; /* PCI bus of the requester */ + uint8_t devfn; /* Requester identifier, AKA device_id */ bool notifier; /* IOMMU unmap notifier enabled */ QLIST_ENTRY(RISCVIOMMUSpace) list; }; @@ -XXX,XX +XXX,XX @@ struct RISCVIOMMUEntry { /* IOMMU index for transactions without process_id specified. */ #define RISCV_IOMMU_NOPROCID 0 +static uint32_t riscv_iommu_space_devid(RISCVIOMMUSpace *as) +{ + uint32_t devid = PCI_BUILD_BDF(pci_bus_num(as->bus), as->devfn); + + /* FIXME: PCIe bus remapping for attached endpoints. */ + devid |= as->iommu->bus << 8; + return devid; +} + static uint8_t riscv_iommu_get_icvec_vector(uint32_t icvec, uint32_t vec_type) { switch (vec_type) { @@ -XXX,XX +XXX,XX @@ static void riscv_iommu_ctx_put(RISCVIOMMUState *s, void *ref) } /* Find or allocate address space for a given device */ -static AddressSpace *riscv_iommu_space(RISCVIOMMUState *s, uint32_t devid) +static AddressSpace *riscv_iommu_space(RISCVIOMMUState *s, PCIBus *bus, + int devfn) { RISCVIOMMUSpace *as; - /* FIXME: PCIe bus remapping for attached endpoints. */ - devid |= s->bus << 8; - QLIST_FOREACH(as, &s->spaces, list) { - if (as->devid == devid) { + if (as->bus == bus && as->devfn == devfn) { break; } } @@ -XXX,XX +XXX,XX @@ static AddressSpace *riscv_iommu_space(RISCVIOMMUState *s, uint32_t devid) as = g_new0(RISCVIOMMUSpace, 1); as->iommu = s; - as->devid = devid; + as->bus = bus; + as->devfn = devfn; snprintf(name, sizeof(name), "riscv-iommu-%04x:%02x.%d-iova", - PCI_BUS_NUM(as->devid), PCI_SLOT(as->devid), PCI_FUNC(as->devid)); + pci_bus_num(bus), PCI_SLOT(devfn), PCI_FUNC(devfn)); /* IOVA address space, untranslated addresses */ memory_region_init_iommu(&as->iova_mr, sizeof(as->iova_mr), @@ -XXX,XX +XXX,XX @@ static AddressSpace *riscv_iommu_space(RISCVIOMMUState *s, uint32_t devid) QLIST_INSERT_HEAD(&s->spaces, as, list); - trace_riscv_iommu_new(s->parent_obj.id, PCI_BUS_NUM(as->devid), - PCI_SLOT(as->devid), PCI_FUNC(as->devid)); + trace_riscv_iommu_new(s->parent_obj.id, pci_bus_num(bus), + PCI_SLOT(devfn), PCI_FUNC(devfn)); } return &as->iova_as; } @@ -XXX,XX +XXX,XX @@ static void riscv_iommu_ats(RISCVIOMMUState *s, pid = get_field(cmd->dword0, RISCV_IOMMU_CMD_ATS_PID); QLIST_FOREACH(as, &s->spaces, list) { - if (as->devid == devid) { + if (riscv_iommu_space_devid(as) == devid) { break; } } @@ -XXX,XX +XXX,XX @@ static IOMMUTLBEntry riscv_iommu_memory_region_translate( .addr_mask = ~0ULL, .perm = flag, }; + uint32_t devid = riscv_iommu_space_devid(as); - ctx = riscv_iommu_ctx(as->iommu, as->devid, iommu_idx, &ref); + ctx = riscv_iommu_ctx(as->iommu, devid, iommu_idx, &ref); if (ctx == NULL) { /* Translation disabled or invalid. */ iotlb.addr_mask = 0; @@ -XXX,XX +XXX,XX @@ static IOMMUTLBEntry riscv_iommu_memory_region_translate( } /* Trace all dma translations with original access flags. */ - trace_riscv_iommu_dma(as->iommu->parent_obj.id, PCI_BUS_NUM(as->devid), - PCI_SLOT(as->devid), PCI_FUNC(as->devid), iommu_idx, + trace_riscv_iommu_dma(as->iommu->parent_obj.id, PCI_BUS_NUM(devid), + PCI_SLOT(devid), PCI_FUNC(devid), iommu_idx, IOMMU_FLAG_STR[flag & IOMMU_RW], iotlb.iova, iotlb.translated_addr); @@ -XXX,XX +XXX,XX @@ static AddressSpace *riscv_iommu_find_as(PCIBus *bus, void *opaque, int devfn) /* Find first matching IOMMU */ while (s != NULL && as == NULL) { - as = riscv_iommu_space(s, PCI_BUILD_BDF(pci_bus_num(bus), devfn)); + as = riscv_iommu_space(s, bus, devfn); s = s->iommus.le_next; } -- 2.53.0 From: Guenter Roeck <linux@roeck-us.net> Minimal clock register configuration required to boot Linux without backtraces in the clock code. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260514-reference-overhand-749149e36a88@spud> [ Changes by AF: - Fixup checkpatch errors ] Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/misc/mchp_pfsoc_ioscb.h | 2 ++ hw/misc/mchp_pfsoc_ioscb.c | 47 +++++++++++++++++++++++++++++- hw/misc/mchp_pfsoc_sysreg.c | 13 +++++++++ 3 files changed, 61 insertions(+), 1 deletion(-) diff --git a/include/hw/misc/mchp_pfsoc_ioscb.h b/include/hw/misc/mchp_pfsoc_ioscb.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/mchp_pfsoc_ioscb.h +++ b/include/hw/misc/mchp_pfsoc_ioscb.h @@ -XXX,XX +XXX,XX @@ typedef struct MchpPfSoCIoscbState { MemoryRegion mailbox; MemoryRegion cfg; MemoryRegion ccc; + MemoryRegion pll_nw_0; + MemoryRegion pll_nw_1; MemoryRegion pll_mss; MemoryRegion cfm_mss; MemoryRegion pll_ddr; diff --git a/hw/misc/mchp_pfsoc_ioscb.c b/hw/misc/mchp_pfsoc_ioscb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/mchp_pfsoc_ioscb.c +++ b/hw/misc/mchp_pfsoc_ioscb.c @@ -XXX,XX +XXX,XX @@ #define IOSCB_MAILBOX_BASE 0x07020800 #define IOSCB_CFG_BASE 0x07080000 #define IOSCB_CCC_BASE 0x08000000 +#define IOSCB_PLL_NW0_BASE 0x08100000 +#define IOSCB_PLL_NW1_BASE 0x08200000 #define IOSCB_PLL_MSS_BASE 0x0E001000 #define IOSCB_CFM_MSS_BASE 0x0E002000 #define IOSCB_PLL_DDR_BASE 0x0E010000 @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps mchp_pfsoc_dummy_ops = { /* All PLL modules in IOSCB have the same register layout */ #define PLL_CTRL 0x04 +#define PLL_REF_FB 0x08 +#define PLL_DIV_0_1 0x10 +#define PLL_DIV_2_3 0x14 +#define PLL_CTRL2 0x18 +#define PLL_CAL 0x1c +#define PLL_PHADJ 0x20 +#define SSCG_REG_0 0x24 +#define SSCG_REG_1 0x28 +#define SSCG_REG_2 0x2c +#define SSCG_REG_3 0x30 static uint64_t mchp_pfsoc_pll_read(void *opaque, hwaddr offset, unsigned size) @@ -XXX,XX +XXX,XX @@ static uint64_t mchp_pfsoc_pll_read(void *opaque, hwaddr offset, /* PLL is locked */ val = BIT(25); break; + case PLL_DIV_0_1: + case PLL_DIV_2_3: + val = 0x01000100; /* return valid post divider values */ + break; + case PLL_CTRL2: + val = 0x00001110; + break; + case PLL_REF_FB: + val = 0x00000100; /* RFDIV := 1 */ + break; + case SSCG_REG_2: + val = 0x00000001; /* INTIN := 1 */ + break; + case PLL_PHADJ: + val = 0x00000401; + break; default: qemu_log_mask(LOG_UNIMP, "%s: unimplemented device read " "(size %d, offset 0x%" HWADDR_PRIx ")\n", @@ -XXX,XX +XXX,XX @@ static uint64_t mchp_pfsoc_pll_read(void *opaque, hwaddr offset, return val; } +static void mchp_pfsoc_pll_write(void *opaque, hwaddr offset, + uint64_t value, unsigned size) +{ + qemu_log_mask(LOG_UNIMP, "%s: unimplemented device write " + "(size %d, value 0x%" PRIx64 + ", offset 0x%" HWADDR_PRIx ")\n", + __func__, size, value, offset); +} + static const MemoryRegionOps mchp_pfsoc_pll_ops = { .read = mchp_pfsoc_pll_read, - .write = mchp_pfsoc_dummy_write, + .write = mchp_pfsoc_pll_write, .endianness = DEVICE_LITTLE_ENDIAN, }; @@ -XXX,XX +XXX,XX @@ static void mchp_pfsoc_ioscb_realize(DeviceState *dev, Error **errp) "mchp.pfsoc.ioscb.ccc", IOSCB_CCC_REG_SIZE); memory_region_add_subregion(&s->container, IOSCB_CCC_BASE, &s->ccc); + memory_region_init_io(&s->pll_nw_0, OBJECT(s), &mchp_pfsoc_pll_ops, s, + "mchp.pfsoc.ioscb.pll_nw_0", IOSCB_SUBMOD_REG_SIZE); + memory_region_add_subregion(&s->container, IOSCB_PLL_NW0_BASE, &s->pll_nw_0); + + memory_region_init_io(&s->pll_nw_1, OBJECT(s), &mchp_pfsoc_pll_ops, s, + "mchp.pfsoc.ioscb.pll_nw_1", IOSCB_SUBMOD_REG_SIZE); + memory_region_add_subregion(&s->container, IOSCB_PLL_NW1_BASE, &s->pll_nw_1); + memory_region_init_io(&s->pll_mss, OBJECT(s), &mchp_pfsoc_pll_ops, s, "mchp.pfsoc.ioscb.pll_mss", IOSCB_SUBMOD_REG_SIZE); memory_region_add_subregion(&s->container, IOSCB_PLL_MSS_BASE, &s->pll_mss); diff --git a/hw/misc/mchp_pfsoc_sysreg.c b/hw/misc/mchp_pfsoc_sysreg.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/mchp_pfsoc_sysreg.c +++ b/hw/misc/mchp_pfsoc_sysreg.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/mchp_pfsoc_sysreg.h" #include "system/runstate.h" +#define CLOCK_CONFIG_CR 0x8 +#define RTC_CLOCK_CR 0xc #define MSS_RESET_CR 0x18 #define ENVM_CR 0xb8 #define MESSAGE_INT 0x118c @@ -XXX,XX +XXX,XX @@ static uint64_t mchp_pfsoc_sysreg_read(void *opaque, hwaddr offset, uint32_t val = 0; switch (offset) { + case CLOCK_CONFIG_CR: + /* Icicle kit reference design cpu/axi/ahb divider setting */ + val = 0x24; + break; + case RTC_CLOCK_CR: + /* + * Bit 16 enables the RTC clock, 0x7d is the required divider + * setting for a 125 MHz reference. + */ + val = BIT(16) | 0x7d; + break; case ENVM_CR: /* Indicate the eNVM is running at the configured divider rate */ val = BIT(6); -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> The entry was missing from isa_edata_arr[]. Fixes: 32bbab666 ("target/riscv: add draft RISC-V Zbr ext as xbr0p93") Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-2-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(svrsw60t59b, PRIV_VERSION_1_13_0, ext_svrsw60t59b), ISA_EXT_DATA_ENTRY(svukte, PRIV_VERSION_1_13_0, ext_svukte), ISA_EXT_DATA_ENTRY(svvptc, PRIV_VERSION_1_13_0, ext_svvptc), + ISA_EXT_DATA_ENTRY(xlrbr, PRIV_VERSION_1_13_0, ext_xlrbr), ISA_EXT_DATA_ENTRY(xmipscbop, PRIV_VERSION_1_12_0, ext_xmipscbop), ISA_EXT_DATA_ENTRY(xmipscmov, PRIV_VERSION_1_12_0, ext_xmipscmov), ISA_EXT_DATA_ENTRY(xmipslsp, PRIV_VERSION_1_12_0, ext_xmipslsp), -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Noticed when realizing that 'svadu' was too far apart from 'svade'. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-3-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(smcdeleg, PRIV_VERSION_1_13_0, ext_smcdeleg), ISA_EXT_DATA_ENTRY(smcntrpmf, PRIV_VERSION_1_12_0, ext_smcntrpmf), ISA_EXT_DATA_ENTRY(smcsrind, PRIV_VERSION_1_13_0, ext_smcsrind), + ISA_EXT_DATA_ENTRY(smctr, PRIV_VERSION_1_12_0, ext_smctr), ISA_EXT_DATA_ENTRY(smdbltrp, PRIV_VERSION_1_13_0, ext_smdbltrp), ISA_EXT_DATA_ENTRY(smepmp, PRIV_VERSION_1_12_0, ext_smepmp), ISA_EXT_DATA_ENTRY(smpmpmt, PRIV_VERSION_1_12_0, ext_smpmpmt), @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(sscofpmf, PRIV_VERSION_1_12_0, ext_sscofpmf), ISA_EXT_DATA_ENTRY(sscounterenw, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(sscsrind, PRIV_VERSION_1_12_0, ext_sscsrind), + ISA_EXT_DATA_ENTRY(ssctr, PRIV_VERSION_1_12_0, ext_ssctr), ISA_EXT_DATA_ENTRY(ssdbltrp, PRIV_VERSION_1_13_0, ext_ssdbltrp), ISA_EXT_DATA_ENTRY(ssnpm, PRIV_VERSION_1_13_0, ext_ssnpm), ISA_EXT_DATA_ENTRY(sspm, PRIV_VERSION_1_13_0, ext_sspm), @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(ssu64xl, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(supm, PRIV_VERSION_1_13_0, ext_supm), ISA_EXT_DATA_ENTRY(svade, PRIV_VERSION_1_11_0, ext_svade), - ISA_EXT_DATA_ENTRY(smctr, PRIV_VERSION_1_12_0, ext_smctr), - ISA_EXT_DATA_ENTRY(ssctr, PRIV_VERSION_1_12_0, ext_ssctr), ISA_EXT_DATA_ENTRY(svadu, PRIV_VERSION_1_12_0, ext_svadu), ISA_EXT_DATA_ENTRY(svinval, PRIV_VERSION_1_12_0, ext_svinval), ISA_EXT_DATA_ENTRY(svnapot, PRIV_VERSION_1_12_0, ext_svnapot), -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> We want to reduce the usage of the riscv_cpu_* arrays in target/riscv/cpu.c, centering everything in isa_edata_arr[] instead, to reduce data duplication and make our lives a bit easier when adding new extensions. To do that we'll have to make isa_edata_arr[] do what the other arrays are currently doing, not breaking existing semantics in the process. The riscv_cpu_* arrays have a few exclusive uses: - set default extensions for rv32 and rv64; - create user CPU properties; - misc uses around tcg-cpu.c and kvm-cpu.c. We'll slowly make isa_edata_arr[] supersede these arrays. Start by adding a new 'prop_name' field in RISCVIsaExtData. This field is needed because not all extensions have properties and not all properties match the riscv,isa string name. Create two additional macros and reclassify existing isa_edata_arr[] entries as follows: - ISA_EXT_DATA_ENTRY creates an entry where prop_name == riscv,isa. Most of our regular extensions fall into this category; - ISA_EXPERIMENTAL_EXT_DATA_ENTRY: same as above but add a "x-" to the prop name, i.e. prop_name == "x-" + riscv,isa; - ISA_INTERNAL_EXT_DATA_ENTRY: used to declared internal extensions. By 'internal' we mean users/management can't set them on or off. With these new macros we can start our simplification by changing riscv-qmp-cmds to use isa_edata_arr[]. We'll just scroll through it once and gather what we need. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-4-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 1 + target/riscv/cpu.c | 60 +++++++++++++++++++++++------------ target/riscv/riscv-qmp-cmds.c | 30 ++++-------------- 3 files changed, 47 insertions(+), 44 deletions(-) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ extern const RISCVCPUMultiExtConfig riscv_cpu_named_features[]; typedef struct isa_ext_data { const char *name; + const char *prop_name; int min_version; int ext_enable_offset; } RISCVIsaExtData; diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_cfg_merge(RISCVCPUConfig *dest, const RISCVCPUConfig *src) #include "cpu_cfg_fields.h.inc" } +/* Use this for regular user facing extensions */ #define ISA_EXT_DATA_ENTRY(_name, _min_ver, _prop) \ - {#_name, _min_ver, CPU_CFG_OFFSET(_prop)} + {#_name, #_name, _min_ver, CPU_CFG_OFFSET(_prop)} + +/* + * Same as above but for experimental extensions. We'll add a + * "x-" right after "_name" when creating the user property. + */ +#define ISA_EXPERIMENTAL_EXT_DATA_ENTRY(_name, _min_ver, _prop) \ + {#_name, "x-" #_name, _min_ver, CPU_CFG_OFFSET(_prop)} + +/* + * Internal extensions are extensions we will declare in the + * riscv,isa DT but they don't have an user property, i.e. + * users/management can't enable/disable them. + */ +#define ISA_INTERNAL_EXT_DATA_ENTRY(_name, _min_ver, _prop) \ + {#_name, NULL, _min_ver, CPU_CFG_OFFSET(_prop)} /* * Here are the ordering rules of extension naming defined by RISC-V @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_cfg_merge(RISCVCPUConfig *dest, const RISCVCPUConfig *src) * instead. */ const RISCVIsaExtData isa_edata_arr[] = { - ISA_EXT_DATA_ENTRY(zic64b, PRIV_VERSION_1_12_0, ext_zic64b), + ISA_INTERNAL_EXT_DATA_ENTRY(zic64b, PRIV_VERSION_1_12_0, ext_zic64b), ISA_EXT_DATA_ENTRY(zicbom, PRIV_VERSION_1_12_0, ext_zicbom), ISA_EXT_DATA_ENTRY(zicbop, PRIV_VERSION_1_12_0, ext_zicbop), ISA_EXT_DATA_ENTRY(zicboz, PRIV_VERSION_1_12_0, ext_zicboz), - ISA_EXT_DATA_ENTRY(ziccamoa, PRIV_VERSION_1_11_0, has_priv_1_11), - ISA_EXT_DATA_ENTRY(ziccif, PRIV_VERSION_1_11_0, has_priv_1_11), - ISA_EXT_DATA_ENTRY(zicclsm, PRIV_VERSION_1_11_0, has_priv_1_11), + ISA_INTERNAL_EXT_DATA_ENTRY(ziccamoa, PRIV_VERSION_1_11_0, has_priv_1_11), + ISA_INTERNAL_EXT_DATA_ENTRY(ziccif, PRIV_VERSION_1_11_0, has_priv_1_11), + ISA_INTERNAL_EXT_DATA_ENTRY(zicclsm, PRIV_VERSION_1_11_0, has_priv_1_11), ISA_EXT_DATA_ENTRY(ziccrse, PRIV_VERSION_1_11_0, ext_ziccrse), ISA_EXT_DATA_ENTRY(zicfilp, PRIV_VERSION_1_12_0, ext_zicfilp), ISA_EXT_DATA_ENTRY(zicfiss, PRIV_VERSION_1_13_0, ext_zicfiss), @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(zilsd, PRIV_VERSION_1_12_0, ext_zilsd), ISA_EXT_DATA_ENTRY(zimop, PRIV_VERSION_1_13_0, ext_zimop), ISA_EXT_DATA_ENTRY(zmmul, PRIV_VERSION_1_12_0, ext_zmmul), - ISA_EXT_DATA_ENTRY(za64rs, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(za64rs, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(zaamo, PRIV_VERSION_1_12_0, ext_zaamo), ISA_EXT_DATA_ENTRY(zabha, PRIV_VERSION_1_13_0, ext_zabha), ISA_EXT_DATA_ENTRY(zacas, PRIV_VERSION_1_12_0, ext_zacas), @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(zhinx, PRIV_VERSION_1_12_0, ext_zhinx), ISA_EXT_DATA_ENTRY(zhinxmin, PRIV_VERSION_1_12_0, ext_zhinxmin), ISA_EXT_DATA_ENTRY(sdtrig, PRIV_VERSION_1_12_0, debug), - ISA_EXT_DATA_ENTRY(shcounterenw, PRIV_VERSION_1_12_0, has_priv_1_12), - ISA_EXT_DATA_ENTRY(sha, PRIV_VERSION_1_12_0, ext_sha), - ISA_EXT_DATA_ENTRY(shgatpa, PRIV_VERSION_1_12_0, has_priv_1_12), - ISA_EXT_DATA_ENTRY(shtvala, PRIV_VERSION_1_12_0, has_priv_1_12), - ISA_EXT_DATA_ENTRY(shvsatpa, PRIV_VERSION_1_12_0, has_priv_1_12), - ISA_EXT_DATA_ENTRY(shvstvala, PRIV_VERSION_1_12_0, has_priv_1_12), - ISA_EXT_DATA_ENTRY(shvstvecd, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(shcounterenw, PRIV_VERSION_1_12_0, + has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(sha, PRIV_VERSION_1_12_0, ext_sha), + ISA_INTERNAL_EXT_DATA_ENTRY(shgatpa, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(shtvala, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(shvsatpa, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(shvstvala, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(shvstvecd, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(smaia, PRIV_VERSION_1_12_0, ext_smaia), ISA_EXT_DATA_ENTRY(smcdeleg, PRIV_VERSION_1_13_0, ext_smcdeleg), ISA_EXT_DATA_ENTRY(smcntrpmf, PRIV_VERSION_1_12_0, ext_smcntrpmf), @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(smstateen, PRIV_VERSION_1_12_0, ext_smstateen), ISA_EXT_DATA_ENTRY(ssaia, PRIV_VERSION_1_12_0, ext_ssaia), ISA_EXT_DATA_ENTRY(ssccfg, PRIV_VERSION_1_13_0, ext_ssccfg), - ISA_EXT_DATA_ENTRY(ssccptr, PRIV_VERSION_1_11_0, has_priv_1_11), + ISA_INTERNAL_EXT_DATA_ENTRY(ssccptr, PRIV_VERSION_1_11_0, has_priv_1_11), ISA_EXT_DATA_ENTRY(sscofpmf, PRIV_VERSION_1_12_0, ext_sscofpmf), - ISA_EXT_DATA_ENTRY(sscounterenw, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(sscounterenw, PRIV_VERSION_1_12_0, + has_priv_1_12), ISA_EXT_DATA_ENTRY(sscsrind, PRIV_VERSION_1_12_0, ext_sscsrind), ISA_EXT_DATA_ENTRY(ssctr, PRIV_VERSION_1_12_0, ext_ssctr), ISA_EXT_DATA_ENTRY(ssdbltrp, PRIV_VERSION_1_13_0, ext_ssdbltrp), ISA_EXT_DATA_ENTRY(ssnpm, PRIV_VERSION_1_13_0, ext_ssnpm), ISA_EXT_DATA_ENTRY(sspm, PRIV_VERSION_1_13_0, ext_sspm), - ISA_EXT_DATA_ENTRY(ssstateen, PRIV_VERSION_1_12_0, ext_ssstateen), - ISA_EXT_DATA_ENTRY(ssstrict, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(ssstateen, PRIV_VERSION_1_12_0, ext_ssstateen), + ISA_INTERNAL_EXT_DATA_ENTRY(ssstrict, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(sstc, PRIV_VERSION_1_12_0, ext_sstc), - ISA_EXT_DATA_ENTRY(sstvala, PRIV_VERSION_1_12_0, has_priv_1_12), - ISA_EXT_DATA_ENTRY(sstvecd, PRIV_VERSION_1_12_0, has_priv_1_12), - ISA_EXT_DATA_ENTRY(ssu64xl, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(sstvala, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(sstvecd, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(ssu64xl, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(supm, PRIV_VERSION_1_13_0, ext_supm), ISA_EXT_DATA_ENTRY(svade, PRIV_VERSION_1_11_0, ext_svade), ISA_EXT_DATA_ENTRY(svadu, PRIV_VERSION_1_12_0, ext_svadu), @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(svnapot, PRIV_VERSION_1_12_0, ext_svnapot), ISA_EXT_DATA_ENTRY(svpbmt, PRIV_VERSION_1_12_0, ext_svpbmt), ISA_EXT_DATA_ENTRY(svrsw60t59b, PRIV_VERSION_1_13_0, ext_svrsw60t59b), - ISA_EXT_DATA_ENTRY(svukte, PRIV_VERSION_1_13_0, ext_svukte), + ISA_EXPERIMENTAL_EXT_DATA_ENTRY(svukte, PRIV_VERSION_1_13_0, ext_svukte), ISA_EXT_DATA_ENTRY(svvptc, PRIV_VERSION_1_13_0, ext_svvptc), ISA_EXT_DATA_ENTRY(xlrbr, PRIV_VERSION_1_13_0, ext_xlrbr), ISA_EXT_DATA_ENTRY(xmipscbop, PRIV_VERSION_1_12_0, ext_xmipscbop), diff --git a/target/riscv/riscv-qmp-cmds.c b/target/riscv/riscv-qmp-cmds.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/riscv-qmp-cmds.c +++ b/target/riscv/riscv-qmp-cmds.c @@ -XXX,XX +XXX,XX @@ static void riscv_obj_add_qdict_prop(Object *obj, QDict *qdict_out, } } -static void riscv_obj_add_multiext_props(Object *obj, QDict *qdict_out, - const RISCVCPUMultiExtConfig *arr) +static void riscv_obj_add_multiext_props(Object *obj, QDict *qdict_out) { - for (int i = 0; arr[i].name != NULL; i++) { - riscv_obj_add_qdict_prop(obj, qdict_out, arr[i].name); - } -} + const RISCVIsaExtData *edata; -static void riscv_obj_add_named_feats_qdict(Object *obj, QDict *qdict_out) -{ - const RISCVCPUMultiExtConfig *named_cfg; - RISCVCPU *cpu = RISCV_CPU(obj); - QObject *value; - bool flag_val; - - for (int i = 0; riscv_cpu_named_features[i].name != NULL; i++) { - named_cfg = &riscv_cpu_named_features[i]; - flag_val = isa_ext_is_enabled(cpu, named_cfg->offset); - value = QOBJECT(qbool_from_bool(flag_val)); - - qdict_put_obj(qdict_out, named_cfg->name, value); + for (edata = isa_edata_arr; edata && edata->name; edata++) { + if (edata->prop_name) { + riscv_obj_add_qdict_prop(obj, qdict_out, edata->prop_name); + } } } @@ -XXX,XX +XXX,XX @@ CpuModelExpansionInfo *qmp_query_cpu_model_expansion(CpuModelExpansionType type, qdict_out = qdict_new(); - riscv_obj_add_multiext_props(obj, qdict_out, riscv_cpu_extensions); - riscv_obj_add_multiext_props(obj, qdict_out, riscv_cpu_experimental_exts); - riscv_obj_add_multiext_props(obj, qdict_out, riscv_cpu_vendor_exts); - riscv_obj_add_named_feats_qdict(obj, qdict_out); + riscv_obj_add_multiext_props(obj, qdict_out); riscv_obj_add_profiles_qdict(obj, qdict_out); /* Add our CPU boolean options too */ -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Commit 7e4f75cadf ("target/riscv/tcg: hide warn for named feats when disabling via priv_ver") changed the design of disable_priv_spec_isa_exts to not warn when disabling what we were calling "named features" at that time. Back in that time we were adding RVA22 profile support and we were dealing with a RVI innovation: named features. These can be define as cute names for pre-existing behavior/parameters, e.g. 'zic64b' means all cache blocks must have 64 bytes. They do get inserted in the riscv,isa but they are not "real" extensions because users shouldn't be setting them in the command line, or so we thought back then, and we attempted to model that by calling it "named features". This didn't age that well: ziccrse is a so called named feature as far as TCG goes, but then KVM had to treat it as a regular extension that can be user set and we made an exception: ziccrse is a named feature that is user set by KVM. "Named features" are regular extensions that might or might not be user set, and might or might not warrant special handling during realize() by setting other parameters. And we'll being treating them as such, which will culminate in the end of riscv_cpu_named_features[] array in the end. This reverts commit 7e4f75cadf44ee67809c7ca82645a289a5268966. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-5-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 13 +++---------- 1 file changed, 3 insertions(+), 10 deletions(-) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_disable_priv_spec_isa_exts(RISCVCPU *cpu) } isa_ext_update_enabled(cpu, edata->ext_enable_offset, false); - - /* - * Do not show user warnings for named features that users - * can't enable/disable in the command line. See commit - * 68c9e54bea for more info. - */ - if (cpu_cfg_offset_is_named_feat(edata->ext_enable_offset)) { - continue; - } #ifndef CONFIG_USER_ONLY warn_report("disabling %s extension for hart 0x%" PRIx64 " because privilege spec version does not match", @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_update_named_features(RISCVCPU *cpu) cpu->cfg.has_priv_1_13 = true; } + /* zic64b is 1.12 or later */ cpu->cfg.ext_zic64b = cpu->cfg.cbom_blocksize == 64 && cpu->cfg.cbop_blocksize == 64 && - cpu->cfg.cboz_blocksize == 64; + cpu->cfg.cboz_blocksize == 64 && + cpu->cfg.has_priv_1_12; cpu->cfg.ext_ssstateen = cpu->cfg.ext_smstateen; -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> We're using both isa_edata_arr[] and riscv_cpu_named_features[] to find an extension name based on a cfg offset. This is reminiscent of a past where isa_edata_arr[] didn't include entries for internal extensions. At this point we can use just isa_edata_arr[]. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-6-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static int cpu_cfg_ext_get_min_version(uint32_t ext_offset) static const char *cpu_cfg_ext_get_name(uint32_t ext_offset) { - const RISCVCPUMultiExtConfig *feat; const RISCVIsaExtData *edata; for (edata = isa_edata_arr; edata->name != NULL; edata++) { @@ -XXX,XX +XXX,XX @@ static const char *cpu_cfg_ext_get_name(uint32_t ext_offset) } } - for (feat = riscv_cpu_named_features; feat->name != NULL; feat++) { - if (feat->offset == ext_offset) { - return feat->name; - } - } - g_assert_not_reached(); } -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Deprecate riscv_cpu_enable_named_feat() by creating implied rules for 'sha' and 'ssstateen'. 'zic64' is always true given that our default block size is set to 64. With this change we homogeneize extension handling when enabling profiles. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-7-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 25 ++++++++++++++++++++++-- target/riscv/tcg/tcg-cpu.c | 40 -------------------------------------- 2 files changed, 23 insertions(+), 42 deletions(-) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static RISCVCPUImpliedExtsRule ZVKSG_IMPLIED = { }, }; +static RISCVCPUImpliedExtsRule SHA_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_sha), + .implied_misa_exts = RVH, + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_smstateen), + CPU_CFG_OFFSET(ext_ssstateen), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + static RISCVCPUImpliedExtsRule SSCFG_IMPLIED = { .ext = CPU_CFG_OFFSET(ext_ssccfg), .implied_multi_exts = { @@ -XXX,XX +XXX,XX @@ static RISCVCPUImpliedExtsRule SSCTR_IMPLIED = { }, }; +static RISCVCPUImpliedExtsRule SSSTATEEN_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_ssstateen), + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_smstateen), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + static RISCVCPUImpliedExtsRule ZVFBFA_IMPLIED = { .ext = CPU_CFG_OFFSET(ext_zvfbfa), .implied_multi_exts = { @@ -XXX,XX +XXX,XX @@ RISCVCPUImpliedExtsRule *riscv_multi_ext_implied_rules[] = { &ZVFBFA_IMPLIED, &ZVFBFMIN_IMPLIED, &ZVFBFWMA_IMPLIED, &ZVFH_IMPLIED, &ZVFHMIN_IMPLIED, &ZVKN_IMPLIED, &ZVKNC_IMPLIED, &ZVKNG_IMPLIED, &ZVKNHB_IMPLIED, - &ZVKS_IMPLIED, &ZVKSC_IMPLIED, &ZVKSG_IMPLIED, &SSCFG_IMPLIED, - &SUPM_IMPLIED, &SSPM_IMPLIED, &SMCTR_IMPLIED, &SSCTR_IMPLIED, + &ZVKS_IMPLIED, &ZVKSC_IMPLIED, &ZVKSG_IMPLIED, &SHA_IMPLIED, + &SSCFG_IMPLIED, &SUPM_IMPLIED, &SSPM_IMPLIED, &SMCTR_IMPLIED, + &SSCTR_IMPLIED, &SSSTATEEN_IMPLIED, NULL }; diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static const char *cpu_cfg_ext_get_name(uint32_t ext_offset) g_assert_not_reached(); } -static bool cpu_cfg_offset_is_named_feat(uint32_t ext_offset) -{ - const RISCVCPUMultiExtConfig *feat; - - for (feat = riscv_cpu_named_features; feat->name != NULL; feat++) { - if (feat->offset == ext_offset) { - return true; - } - } - - return false; -} - -static void riscv_cpu_enable_named_feat(RISCVCPU *cpu, uint32_t feat_offset) -{ - /* - * All other named features are already enabled - * in riscv_tcg_cpu_instance_init(). - */ - switch (feat_offset) { - case CPU_CFG_OFFSET(ext_zic64b): - cpu->cfg.cbom_blocksize = 64; - cpu->cfg.cbop_blocksize = 64; - cpu->cfg.cboz_blocksize = 64; - break; - case CPU_CFG_OFFSET(ext_sha): - if (!cpu_misa_ext_is_user_set(RVH)) { - riscv_cpu_write_misa_bit(cpu, RVH, true); - } - /* fallthrough */ - case CPU_CFG_OFFSET(ext_ssstateen): - cpu->cfg.ext_smstateen = true; - break; - } -} - static void cpu_bump_multi_ext_priv_ver(CPURISCVState *env, uint32_t ext_offset) { @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_set_profile(RISCVCPU *cpu, ext_offset = profile->ext_offsets[i]; if (profile->enabled) { - if (cpu_cfg_offset_is_named_feat(ext_offset)) { - riscv_cpu_enable_named_feat(cpu, ext_offset); - } - cpu_bump_multi_ext_priv_ver(&cpu->env, ext_offset); } -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> This array has no uses left. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-8-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 1 - target/riscv/cpu.c | 26 -------------------------- target/riscv/tcg/tcg-cpu.c | 4 ++-- 3 files changed, 2 insertions(+), 29 deletions(-) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct RISCVCPUMultiExtConfig { extern const RISCVCPUMultiExtConfig riscv_cpu_extensions[]; extern const RISCVCPUMultiExtConfig riscv_cpu_vendor_exts[]; extern const RISCVCPUMultiExtConfig riscv_cpu_experimental_exts[]; -extern const RISCVCPUMultiExtConfig riscv_cpu_named_features[]; typedef struct isa_ext_data { const char *name; diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const RISCVCPUMultiExtConfig riscv_cpu_experimental_exts[] = { { }, }; -/* - * 'Named features' is the name we give to extensions that we - * don't want to expose to users. They are either immutable - * (always enabled/disable) or they'll vary depending on - * the resulting CPU state. - * - * Some of them are always enabled depending on priv version - * of the CPU and are declared directly in isa_edata_arr[]. - * The ones listed here have special checks during finalize() - * time and require their own flags like regular extensions. - * See riscv_cpu_update_named_features() for more info. - */ -const RISCVCPUMultiExtConfig riscv_cpu_named_features[] = { - MULTI_EXT_CFG_BOOL("zic64b", ext_zic64b, true), - MULTI_EXT_CFG_BOOL("ssstateen", ext_ssstateen, true), - MULTI_EXT_CFG_BOOL("sha", ext_sha, true), - - /* - * 'ziccrse' has its own flag because the KVM driver - * wants to enable/disable it on its own accord. - */ - MULTI_EXT_CFG_BOOL("ziccrse", ext_ziccrse, true), - - { }, -}; - static void cpu_set_prop_err(RISCVCPU *cpu, const char *propname, Error **errp) { diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_disable_priv_spec_isa_exts(RISCVCPU *cpu) } } -static void riscv_cpu_update_named_features(RISCVCPU *cpu) +static void riscv_cpu_update_cfg(RISCVCPU *cpu) { if (cpu->env.priv_ver >= PRIV_VERSION_1_11_0) { cpu->cfg.has_priv_1_11 = true; @@ -XXX,XX +XXX,XX @@ void riscv_tcg_cpu_finalize_features(RISCVCPU *cpu, Error **errp) return; } - riscv_cpu_update_named_features(cpu); + riscv_cpu_update_cfg(cpu); riscv_cpu_validate_profiles(cpu); if (cpu->cfg.ext_smepmp && !cpu->cfg.pmp) { -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> The non-standard extensions, in this particular function the vendor extensions, are all riscv,isa names that starts with 'x'. In theory this is a bit slower than using riscv_cpu_vendor_exts (isa_edata_arr is longer) but riscv_cpu_update_misa_x() is executed only once during finalize(), i.e. not a hot path. We're accepting a tiny performance hit as as a tradeoff for the code simplication we'll have later by removing all riscv_cpu_* arrays. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-9-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_update_misa_c(RISCVCPU *cpu) static void riscv_cpu_update_misa_x(RISCVCPU *cpu) { CPURISCVState *env = &cpu->env; - const RISCVCPUMultiExtConfig *arr = riscv_cpu_vendor_exts; + const RISCVIsaExtData *edata; - for (int i = 0; arr[i].name != NULL; i++) { - if (isa_ext_is_enabled(cpu, arr[i].offset)) { + for (edata = isa_edata_arr; edata && edata->name; edata++) { + if (edata->name[0] == 'x' + && isa_ext_is_enabled(cpu, edata->ext_enable_offset)) { riscv_cpu_set_misa_ext(env, env->misa_ext | RVX); break; } -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Use isa_edata_arr[] directly instead of going through 3 different arrays to populate the unavailable KVM properties. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-10-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/kvm/kvm-cpu.c | 25 ++++++++++--------------- 1 file changed, 10 insertions(+), 15 deletions(-) diff --git a/target/riscv/kvm/kvm-cpu.c b/target/riscv/kvm/kvm-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/kvm/kvm-cpu.c +++ b/target/riscv/kvm/kvm-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_add_kvm_unavail_prop(Object *obj, const char *prop_name) NULL, (void *)prop_name); } -static void riscv_cpu_add_kvm_unavail_prop_array(Object *obj, - const RISCVCPUMultiExtConfig *array) -{ - const RISCVCPUMultiExtConfig *prop; - - g_assert(array); - - for (prop = array; prop && prop->name; prop++) { - riscv_cpu_add_kvm_unavail_prop(obj, prop->name); - } -} - static void kvm_riscv_add_cpu_user_properties(Object *cpu_obj) { + const RISCVIsaExtData *edata; int i; riscv_add_satp_mode_properties(cpu_obj); @@ -XXX,XX +XXX,XX @@ static void kvm_riscv_add_cpu_user_properties(Object *cpu_obj) NULL, multi_cfg); } - riscv_cpu_add_kvm_unavail_prop_array(cpu_obj, riscv_cpu_extensions); - riscv_cpu_add_kvm_unavail_prop_array(cpu_obj, riscv_cpu_vendor_exts); - riscv_cpu_add_kvm_unavail_prop_array(cpu_obj, riscv_cpu_experimental_exts); + /* + * Mark all isa_edata_arr properties that collides with + * a KVM property as unavailable. + */ + for (edata = isa_edata_arr; edata && edata->name; edata++) { + if (edata->prop_name) { + riscv_cpu_add_kvm_unavail_prop(cpu_obj, edata->prop_name); + } + } /* We don't have the needed KVM support for profiles */ for (i = 0; riscv_profiles[i] != NULL; i++) { -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Use isa_edata_arr[] to enable all feasible extensions. Filter experimental and vendor extensions by checking if the riscv,isa or the prop name starts with 'x'. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-11-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_init_max_cpu_extensions(Object *obj) { RISCVCPU *cpu = RISCV_CPU(obj); CPURISCVState *env = &cpu->env; - const RISCVCPUMultiExtConfig *prop; + const RISCVIsaExtData *edata; /* Enable RVG and RVV that are disabled by default */ riscv_cpu_set_misa_ext(env, env->misa_ext | RVB | RVG | RVV); - for (prop = riscv_cpu_extensions; prop && prop->name; prop++) { - isa_ext_update_enabled(cpu, prop->offset, true); + for (edata = isa_edata_arr; edata && edata->name; edata++) { + if (edata->name[0] == 'x' + || (edata->prop_name && edata->prop_name[0] == 'x')) { + continue; + } + + isa_ext_update_enabled(cpu, edata->ext_enable_offset, true); } /* -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> The cpu_get_multi_ext_cfg/cpu_set_multi_ext_cfg callbacks are using a RISCVCPUMultiExtConfig pointer as opaque, but internally we're just using multi_ext_cfg->offset. Use multi_ext_cfg->offset as opaque instead. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-12-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_add_profiles(Object *cpu_obj) static void cpu_set_multi_ext_cfg(Object *obj, Visitor *v, const char *name, void *opaque, Error **errp) { - const RISCVCPUMultiExtConfig *multi_ext_cfg = opaque; RISCVCPU *cpu = RISCV_CPU(obj); + uint32_t cfg_offset = *(uint32_t *)opaque; bool vendor_cpu = riscv_cpu_is_vendor(obj); bool prev_val, value; @@ -XXX,XX +XXX,XX @@ static void cpu_set_multi_ext_cfg(Object *obj, Visitor *v, const char *name, return; } - cpu_cfg_ext_add_user_opt(multi_ext_cfg->offset, value); + cpu_cfg_ext_add_user_opt(cfg_offset, value); - prev_val = isa_ext_is_enabled(cpu, multi_ext_cfg->offset); + prev_val = isa_ext_is_enabled(cpu, cfg_offset); if (value == prev_val) { return; @@ -XXX,XX +XXX,XX @@ static void cpu_set_multi_ext_cfg(Object *obj, Visitor *v, const char *name, } if (value) { - cpu_bump_multi_ext_priv_ver(&cpu->env, multi_ext_cfg->offset); + cpu_bump_multi_ext_priv_ver(&cpu->env, cfg_offset); } - isa_ext_update_enabled(cpu, multi_ext_cfg->offset, value); + isa_ext_update_enabled(cpu, cfg_offset, value); } static void cpu_get_multi_ext_cfg(Object *obj, Visitor *v, const char *name, void *opaque, Error **errp) { - const RISCVCPUMultiExtConfig *multi_ext_cfg = opaque; - bool value = isa_ext_is_enabled(RISCV_CPU(obj), multi_ext_cfg->offset); + uint32_t cfg_offset = *(uint32_t *)opaque; + bool value = isa_ext_is_enabled(RISCV_CPU(obj), cfg_offset); visit_type_bool(v, name, &value, errp); } @@ -XXX,XX +XXX,XX @@ static void cpu_add_multi_ext_prop(Object *cpu_obj, object_property_add(cpu_obj, multi_cfg->name, "bool", cpu_get_multi_ext_cfg, cpu_set_multi_ext_cfg, - NULL, (void *)multi_cfg); + NULL, (void *)&multi_cfg->offset); if (!generic_cpu) { return; -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Do not rely on riscv_cpu_* arrays to set rv32/rv64 CPU defaults - add them to the CPU definition like we do with all other CPUs (aside from 'max'). Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-13-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 40 ++++++++++++++++++++++++++++++++++++++ target/riscv/tcg/tcg-cpu.c | 14 ------------- 2 files changed, 40 insertions(+), 14 deletions(-) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static const TypeInfo riscv_cpu_type_infos[] = { DEFINE_RISCV_CPU(TYPE_RISCV_CPU_BASE32, TYPE_RISCV_DYNAMIC_CPU, .cfg.max_satp_mode = VM_1_10_SV32, .misa_mxl_max = MXL_RV32, + + /* Default extensions as of QEMU 11.1. */ + .cfg.ext_zicbom = true, + .cfg.ext_zicbop = true, + .cfg.ext_zicboz = true, + .cfg.ext_zicntr = true, + .cfg.ext_zicsr = true, + .cfg.ext_zifencei = true, + .cfg.ext_zihintntl = true, + .cfg.ext_zihintpause = true, + .cfg.ext_zihpm = true, + .cfg.ext_zawrs = true, + .cfg.ext_zfa = true, + .cfg.ext_zba = true, + .cfg.ext_zbb = true, + .cfg.ext_zbc = true, + .cfg.ext_zbs = true, + .cfg.ext_sstc = true, + .cfg.ext_svadu = true, + .cfg.ext_svvptc = true, ), DEFINE_RISCV_CPU(TYPE_RISCV_CPU_IBEX, TYPE_RISCV_VENDOR_CPU, @@ -XXX,XX +XXX,XX @@ static const TypeInfo riscv_cpu_type_infos[] = { DEFINE_RISCV_CPU(TYPE_RISCV_CPU_BASE64, TYPE_RISCV_DYNAMIC_CPU, .cfg.max_satp_mode = VM_1_10_SV57, .misa_mxl_max = MXL_RV64, + + /* Default extensions as of QEMU 11.1. */ + .cfg.ext_zicbom = true, + .cfg.ext_zicbop = true, + .cfg.ext_zicboz = true, + .cfg.ext_zicntr = true, + .cfg.ext_zicsr = true, + .cfg.ext_zifencei = true, + .cfg.ext_zihintntl = true, + .cfg.ext_zihintpause = true, + .cfg.ext_zihpm = true, + .cfg.ext_zawrs = true, + .cfg.ext_zfa = true, + .cfg.ext_zba = true, + .cfg.ext_zbb = true, + .cfg.ext_zbc = true, + .cfg.ext_zbs = true, + .cfg.ext_sstc = true, + .cfg.ext_svadu = true, + .cfg.ext_svvptc = true, ), DEFINE_RISCV_CPU(TYPE_RISCV_CPU_SIFIVE_E51, TYPE_RISCV_CPU_SIFIVE_E, diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void cpu_get_multi_ext_cfg(Object *obj, Visitor *v, const char *name, static void cpu_add_multi_ext_prop(Object *cpu_obj, const RISCVCPUMultiExtConfig *multi_cfg) { - bool generic_cpu = riscv_cpu_is_generic(cpu_obj); - object_property_add(cpu_obj, multi_cfg->name, "bool", cpu_get_multi_ext_cfg, cpu_set_multi_ext_cfg, NULL, (void *)&multi_cfg->offset); - - if (!generic_cpu) { - return; - } - - /* - * Set def val directly instead of using - * object_property_set_bool() to save the set() - * callback hash for user inputs. - */ - isa_ext_update_enabled(RISCV_CPU(cpu_obj), multi_cfg->offset, - multi_cfg->enabled); } static void riscv_cpu_add_multiext_prop_array(Object *obj, -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> This change has been done twice now: one in riscv-qmp-cmds, another in the KVM. We're now ready to do it for TCG. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-14-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 34 ++++++++++------------------------ 1 file changed, 10 insertions(+), 24 deletions(-) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void cpu_get_multi_ext_cfg(Object *obj, Visitor *v, const char *name, visit_type_bool(v, name, &value, errp); } -static void cpu_add_multi_ext_prop(Object *cpu_obj, - const RISCVCPUMultiExtConfig *multi_cfg) -{ - object_property_add(cpu_obj, multi_cfg->name, "bool", - cpu_get_multi_ext_cfg, - cpu_set_multi_ext_cfg, - NULL, (void *)&multi_cfg->offset); -} - -static void riscv_cpu_add_multiext_prop_array(Object *obj, - const RISCVCPUMultiExtConfig *array) -{ - const RISCVCPUMultiExtConfig *prop; - - g_assert(array); - - for (prop = array; prop && prop->name; prop++) { - cpu_add_multi_ext_prop(obj, prop); - } -} - /* * Add CPU properties with user-facing flags. * @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_add_multiext_prop_array(Object *obj, */ static void riscv_cpu_add_user_properties(Object *obj) { + const RISCVIsaExtData *edata; + #ifndef CONFIG_USER_ONLY riscv_add_satp_mode_properties(obj); #endif riscv_cpu_add_misa_properties(obj); - riscv_cpu_add_multiext_prop_array(obj, riscv_cpu_extensions); - riscv_cpu_add_multiext_prop_array(obj, riscv_cpu_vendor_exts); - riscv_cpu_add_multiext_prop_array(obj, riscv_cpu_experimental_exts); + for (edata = isa_edata_arr; edata && edata->name; edata++) { + if (edata->prop_name) { + object_property_add(obj, edata->prop_name, "bool", + cpu_get_multi_ext_cfg, + cpu_set_multi_ext_cfg, + NULL, (void *)&edata->ext_enable_offset); + } + } riscv_cpu_add_profiles(obj); } -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> There is no more uses left for these arrays. isa_edata_arr[] is doing everything we need, making our lives a little easier when adding new extensions. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-15-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 10 --- target/riscv/cpu.c | 159 --------------------------------------------- 2 files changed, 169 deletions(-) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ bool isa_ext_is_enabled(RISCVCPU *cpu, uint32_t ext_offset); void riscv_cpu_set_misa_ext(CPURISCVState *env, uint32_t ext); bool riscv_cpu_is_vendor(Object *cpu_obj); -typedef struct RISCVCPUMultiExtConfig { - const char *name; - uint32_t offset; - bool enabled; -} RISCVCPUMultiExtConfig; - -extern const RISCVCPUMultiExtConfig riscv_cpu_extensions[]; -extern const RISCVCPUMultiExtConfig riscv_cpu_vendor_exts[]; -extern const RISCVCPUMultiExtConfig riscv_cpu_experimental_exts[]; - typedef struct isa_ext_data { const char *name; const char *prop_name; diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const char *riscv_get_misa_ext_description(uint32_t bit) return val; } -#define MULTI_EXT_CFG_BOOL(_name, _prop, _defval) \ - {.name = _name, .offset = CPU_CFG_OFFSET(_prop), \ - .enabled = _defval} - -const RISCVCPUMultiExtConfig riscv_cpu_extensions[] = { - /* Defaults for standard extensions */ - MULTI_EXT_CFG_BOOL("sscofpmf", ext_sscofpmf, false), - MULTI_EXT_CFG_BOOL("smcntrpmf", ext_smcntrpmf, false), - MULTI_EXT_CFG_BOOL("smcsrind", ext_smcsrind, false), - MULTI_EXT_CFG_BOOL("smcdeleg", ext_smcdeleg, false), - MULTI_EXT_CFG_BOOL("sscsrind", ext_sscsrind, false), - MULTI_EXT_CFG_BOOL("ssccfg", ext_ssccfg, false), - MULTI_EXT_CFG_BOOL("smctr", ext_smctr, false), - MULTI_EXT_CFG_BOOL("ssctr", ext_ssctr, false), - MULTI_EXT_CFG_BOOL("zifencei", ext_zifencei, true), - MULTI_EXT_CFG_BOOL("zicfilp", ext_zicfilp, false), - MULTI_EXT_CFG_BOOL("zicfiss", ext_zicfiss, false), - MULTI_EXT_CFG_BOOL("zicsr", ext_zicsr, true), - MULTI_EXT_CFG_BOOL("zihintntl", ext_zihintntl, true), - MULTI_EXT_CFG_BOOL("zihintpause", ext_zihintpause, true), - MULTI_EXT_CFG_BOOL("zimop", ext_zimop, false), - MULTI_EXT_CFG_BOOL("zcmop", ext_zcmop, false), - MULTI_EXT_CFG_BOOL("zacas", ext_zacas, false), - MULTI_EXT_CFG_BOOL("zama16b", ext_zama16b, false), - MULTI_EXT_CFG_BOOL("zabha", ext_zabha, false), - MULTI_EXT_CFG_BOOL("zaamo", ext_zaamo, false), - MULTI_EXT_CFG_BOOL("zalasr", ext_zalasr, false), - MULTI_EXT_CFG_BOOL("zalrsc", ext_zalrsc, false), - MULTI_EXT_CFG_BOOL("zawrs", ext_zawrs, true), - MULTI_EXT_CFG_BOOL("zfa", ext_zfa, true), - MULTI_EXT_CFG_BOOL("zfbfmin", ext_zfbfmin, false), - MULTI_EXT_CFG_BOOL("zfh", ext_zfh, false), - MULTI_EXT_CFG_BOOL("zfhmin", ext_zfhmin, false), - MULTI_EXT_CFG_BOOL("zve32f", ext_zve32f, false), - MULTI_EXT_CFG_BOOL("zve32x", ext_zve32x, false), - MULTI_EXT_CFG_BOOL("zve64f", ext_zve64f, false), - MULTI_EXT_CFG_BOOL("zve64d", ext_zve64d, false), - MULTI_EXT_CFG_BOOL("zve64x", ext_zve64x, false), - MULTI_EXT_CFG_BOOL("zvfbfa", ext_zvfbfa, false), - MULTI_EXT_CFG_BOOL("zvfbfmin", ext_zvfbfmin, false), - MULTI_EXT_CFG_BOOL("zvfbfwma", ext_zvfbfwma, false), - MULTI_EXT_CFG_BOOL("zvfh", ext_zvfh, false), - MULTI_EXT_CFG_BOOL("zvfhmin", ext_zvfhmin, false), - MULTI_EXT_CFG_BOOL("sstc", ext_sstc, true), - MULTI_EXT_CFG_BOOL("ssnpm", ext_ssnpm, false), - MULTI_EXT_CFG_BOOL("sspm", ext_sspm, false), - MULTI_EXT_CFG_BOOL("supm", ext_supm, false), - - MULTI_EXT_CFG_BOOL("smaia", ext_smaia, false), - MULTI_EXT_CFG_BOOL("smdbltrp", ext_smdbltrp, false), - MULTI_EXT_CFG_BOOL("smepmp", ext_smepmp, false), - MULTI_EXT_CFG_BOOL("smpmpmt", ext_smpmpmt, false), - MULTI_EXT_CFG_BOOL("smrnmi", ext_smrnmi, false), - MULTI_EXT_CFG_BOOL("smmpm", ext_smmpm, false), - MULTI_EXT_CFG_BOOL("smnpm", ext_smnpm, false), - MULTI_EXT_CFG_BOOL("smstateen", ext_smstateen, false), - MULTI_EXT_CFG_BOOL("ssaia", ext_ssaia, false), - MULTI_EXT_CFG_BOOL("ssdbltrp", ext_ssdbltrp, false), - MULTI_EXT_CFG_BOOL("svade", ext_svade, false), - MULTI_EXT_CFG_BOOL("svadu", ext_svadu, true), - MULTI_EXT_CFG_BOOL("svinval", ext_svinval, false), - MULTI_EXT_CFG_BOOL("svnapot", ext_svnapot, false), - MULTI_EXT_CFG_BOOL("svpbmt", ext_svpbmt, false), - MULTI_EXT_CFG_BOOL("svrsw60t59b", ext_svrsw60t59b, false), - MULTI_EXT_CFG_BOOL("svvptc", ext_svvptc, true), - - MULTI_EXT_CFG_BOOL("zicntr", ext_zicntr, true), - MULTI_EXT_CFG_BOOL("zihpm", ext_zihpm, true), - MULTI_EXT_CFG_BOOL("zilsd", ext_zilsd, false), - - MULTI_EXT_CFG_BOOL("zba", ext_zba, true), - MULTI_EXT_CFG_BOOL("zbb", ext_zbb, true), - MULTI_EXT_CFG_BOOL("zbc", ext_zbc, true), - MULTI_EXT_CFG_BOOL("zbkb", ext_zbkb, false), - MULTI_EXT_CFG_BOOL("zbkc", ext_zbkc, false), - MULTI_EXT_CFG_BOOL("zbkx", ext_zbkx, false), - MULTI_EXT_CFG_BOOL("zbs", ext_zbs, true), - MULTI_EXT_CFG_BOOL("zk", ext_zk, false), - MULTI_EXT_CFG_BOOL("zkn", ext_zkn, false), - MULTI_EXT_CFG_BOOL("zknd", ext_zknd, false), - MULTI_EXT_CFG_BOOL("zkne", ext_zkne, false), - MULTI_EXT_CFG_BOOL("zknh", ext_zknh, false), - MULTI_EXT_CFG_BOOL("zkr", ext_zkr, false), - MULTI_EXT_CFG_BOOL("zks", ext_zks, false), - MULTI_EXT_CFG_BOOL("zksed", ext_zksed, false), - MULTI_EXT_CFG_BOOL("zksh", ext_zksh, false), - MULTI_EXT_CFG_BOOL("zkt", ext_zkt, false), - MULTI_EXT_CFG_BOOL("ztso", ext_ztso, false), - - MULTI_EXT_CFG_BOOL("zdinx", ext_zdinx, false), - MULTI_EXT_CFG_BOOL("zfinx", ext_zfinx, false), - MULTI_EXT_CFG_BOOL("zhinx", ext_zhinx, false), - MULTI_EXT_CFG_BOOL("zhinxmin", ext_zhinxmin, false), - - MULTI_EXT_CFG_BOOL("zicbom", ext_zicbom, true), - MULTI_EXT_CFG_BOOL("zicbop", ext_zicbop, true), - MULTI_EXT_CFG_BOOL("zicboz", ext_zicboz, true), - - MULTI_EXT_CFG_BOOL("zmmul", ext_zmmul, false), - - MULTI_EXT_CFG_BOOL("zca", ext_zca, false), - MULTI_EXT_CFG_BOOL("zcb", ext_zcb, false), - MULTI_EXT_CFG_BOOL("zcd", ext_zcd, false), - MULTI_EXT_CFG_BOOL("zce", ext_zce, false), - MULTI_EXT_CFG_BOOL("zcf", ext_zcf, false), - MULTI_EXT_CFG_BOOL("zcmp", ext_zcmp, false), - MULTI_EXT_CFG_BOOL("zcmt", ext_zcmt, false), - MULTI_EXT_CFG_BOOL("zicond", ext_zicond, false), - MULTI_EXT_CFG_BOOL("zclsd", ext_zclsd, false), - - /* Vector cryptography extensions */ - MULTI_EXT_CFG_BOOL("zvbb", ext_zvbb, false), - MULTI_EXT_CFG_BOOL("zvbc", ext_zvbc, false), - MULTI_EXT_CFG_BOOL("zvkb", ext_zvkb, false), - MULTI_EXT_CFG_BOOL("zvkg", ext_zvkg, false), - MULTI_EXT_CFG_BOOL("zvkned", ext_zvkned, false), - MULTI_EXT_CFG_BOOL("zvknha", ext_zvknha, false), - MULTI_EXT_CFG_BOOL("zvknhb", ext_zvknhb, false), - MULTI_EXT_CFG_BOOL("zvksed", ext_zvksed, false), - MULTI_EXT_CFG_BOOL("zvksh", ext_zvksh, false), - MULTI_EXT_CFG_BOOL("zvkt", ext_zvkt, false), - MULTI_EXT_CFG_BOOL("zvkn", ext_zvkn, false), - MULTI_EXT_CFG_BOOL("zvknc", ext_zvknc, false), - MULTI_EXT_CFG_BOOL("zvkng", ext_zvkng, false), - MULTI_EXT_CFG_BOOL("zvks", ext_zvks, false), - MULTI_EXT_CFG_BOOL("zvksc", ext_zvksc, false), - MULTI_EXT_CFG_BOOL("zvksg", ext_zvksg, false), - - { }, -}; - -const RISCVCPUMultiExtConfig riscv_cpu_vendor_exts[] = { - MULTI_EXT_CFG_BOOL("xtheadba", ext_xtheadba, false), - MULTI_EXT_CFG_BOOL("xtheadbb", ext_xtheadbb, false), - MULTI_EXT_CFG_BOOL("xtheadbs", ext_xtheadbs, false), - MULTI_EXT_CFG_BOOL("xtheadcmo", ext_xtheadcmo, false), - MULTI_EXT_CFG_BOOL("xtheadcondmov", ext_xtheadcondmov, false), - MULTI_EXT_CFG_BOOL("xtheadfmemidx", ext_xtheadfmemidx, false), - MULTI_EXT_CFG_BOOL("xtheadfmv", ext_xtheadfmv, false), - MULTI_EXT_CFG_BOOL("xtheadmac", ext_xtheadmac, false), - MULTI_EXT_CFG_BOOL("xtheadmemidx", ext_xtheadmemidx, false), - MULTI_EXT_CFG_BOOL("xtheadmempair", ext_xtheadmempair, false), - MULTI_EXT_CFG_BOOL("xtheadsync", ext_xtheadsync, false), - MULTI_EXT_CFG_BOOL("xventanacondops", ext_XVentanaCondOps, false), - MULTI_EXT_CFG_BOOL("xmipscbop", ext_xmipscbop, false), - MULTI_EXT_CFG_BOOL("xmipscmov", ext_xmipscmov, false), - MULTI_EXT_CFG_BOOL("xmipslsp", ext_xmipslsp, false), - MULTI_EXT_CFG_BOOL("xlrbr", ext_xlrbr, false), - - { }, -}; - -/* These are experimental so mark with 'x-' */ -const RISCVCPUMultiExtConfig riscv_cpu_experimental_exts[] = { - MULTI_EXT_CFG_BOOL("x-svukte", ext_svukte, false), - - { }, -}; - static void cpu_set_prop_err(RISCVCPU *cpu, const char *propname, Error **errp) { -- 2.53.0 From: Fangyu Yu <fangyu.yu@linux.alibaba.com> Fix IOCOUNTINH.CY toggle detection by comparing normalized CY bit rather than XORing whole register with boolean. Fixes: 2cf2a6c027ba ("hw/riscv/riscv-iommu: add IOCOUNTINH mmio writes") Signed-off-by: Fangyu Yu <fangyu.yu@linux.alibaba.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Nutty Liu <nutty.liu@hotmail.com> Message-ID: <20260509074941.99295-1-fangyu.yu@linux.alibaba.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu-hpm.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/riscv/riscv-iommu-hpm.c b/hw/riscv/riscv-iommu-hpm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu-hpm.c +++ b/hw/riscv/riscv-iommu-hpm.c @@ -XXX,XX +XXX,XX @@ void riscv_iommu_process_iocntinh_cy(RISCVIOMMUState *s, bool prev_cy_inh) s, RISCV_IOMMU_REG_IOCOUNTINH); /* We only need to process CY bit toggle. */ - if (!(inhibit ^ prev_cy_inh)) { + bool cy_inh = !!(inhibit & RISCV_IOMMU_IOCOUNTINH_CY); + if (cy_inh == prev_cy_inh) { return; } -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> The priv spec defines, for RV64, that the upper 10 bits of pmpaddr0-pmpaddr63 are WARL and are supposed to be cleared. After this patch, using the bug reproducer in [1], writing ffffffffffffffff in pmpaddr0 and reading it back now results in 003fffffffffffff. Here's the 'diff -cp' dump before and after this change: *************** IN: *** 5272,5278 **** pmpcfg10 0000000000000000 pmpcfg12 0000000000000000 pmpcfg14 0000000000000000 ! pmpaddr0 ffffffffffffffff pmpaddr1 0000000000000000 pmpaddr2 0000000000000000 pmpaddr3 0000000000000000 Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260514123342.2139464-1-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException read_pmpaddr(CPURISCVState *env, int csrno, target_ulong *val) { *val = pmpaddr_csr_read(env, csrno - CSR_PMPADDR0); + + /* + * For RV64, bits 54-63 of the address registers + * PMPAADDR(0-63) is a WARL zero field (priv spec, + * section "Physical Memory Protection CSRs"). + * + * We'll have to add an annoying TARGET_RISCV64 gate + * here to avoid complaints about masking bits 0-53 + * of a potential 32 bit target_ulong '*var'. + */ +#ifdef TARGET_RISCV64 + if (env->misa_mxl == MXL_RV64 + && csrno >= CSR_PMPADDR0 && csrno <= CSR_PMPADDR63) { + target_ulong read_mask = MAKE_64BIT_MASK(0, 54); + *val &= read_mask; + } +#endif return RISCV_EXCP_NONE; } -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> In build_rimt(), the calculation of `num_ids` for the ID mapping array incorrectly uses the same formula (`0xffff - s->pci_iommu_bdf`) for both System IOMMU and PCI IOMMU topologies. For a System IOMMU, `s->pci_iommu_bdf` is 0. This results in a `num_ids` value of 0xffff. Since the source ID base starts at 0, the mapping only covers Requester IDs from 0 to 0xfffe. The final valid PCI Requester ID (0xffff) is erroneously omitted from the RIMT table. Fix this by decoupling the `num_ids` calculation. For System IOMMUs, explicitly set `num_ids` to 0x10000 to cover the entire PCI Requester ID space. This issue was discovered and reported by SpecHunter, an AI-driven architecture specification analysis tool. Link: https://github.com/yizishun/rv-isa-sec/blob/c78dacf66c8acd677b3538c837fde310bb71a97b/output/riscv-server-platform/pr-102/qemu.txt#L32 Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512062310.348208-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt-acpi-build.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/riscv/virt-acpi-build.c b/hw/riscv/virt-acpi-build.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt-acpi-build.c +++ b/hw/riscv/virt-acpi-build.c @@ -XXX,XX +XXX,XX @@ static void build_rimt(GArray *table_data, BIOSLinker *linker, range = &g_array_index(iommu_idmaps, AcpiRimtIdMapping, i); if (virt_is_iommu_sys_enabled(s)) { range->source_id_base = 0; + range->num_ids = 0x10000; } else { range->source_id_base = s->pci_iommu_bdf + 1; + range->num_ids = 0xffff - s->pci_iommu_bdf; } - range->num_ids = 0xffff - s->pci_iommu_bdf; build_rimt_id_mapping(table_data, range->source_id_base, range->num_ids, iommu_offset); } -- 2.53.0 From: Portia Stephens <portias@oss.tenstorrent.com> The counter value was not being bitshifted for a hpmcounterh read resulting in hpmcounterh returning the bottom 32-bits. Fixes: cfc96df65e01 ("target/riscv: Remove upper_half from riscv_pmu_ctr_get_fixed_counters_val") Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3498 Cc: qemu-stable@nongnu.org Signed-off-by: Portia Stephens <portias@oss.tenstorrent.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260519043352.3685866-1-stephensportia@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ RISCVException riscv_pmu_read_ctr(CPURISCVState *env, target_ulong *val, */ if (riscv_pmu_ctr_monitor_cycles(env, ctr_idx) || riscv_pmu_ctr_monitor_instructions(env, ctr_idx)) { - *val = riscv_pmu_ctr_get_fixed_counters_val(env, ctr_idx) - - ctr_prev + ctr_val; + uint64_t cntr = riscv_pmu_ctr_get_fixed_counters_val(env, ctr_idx) - + ctr_prev + ctr_val; + *val = extract64(cntr, start, length); } else { *val = ctr_val; } -- 2.53.0 From: Jim Shu <jim.shu@sifive.com> According to the AIA spec ch4.7 ("Precise effects on interrupt-pending bits"), pending bit of APLIC should be set/cleared whenever the rectified input value is high/low in the both level-trigger mode and direct delivery mode. Currently, QEMU APLIC only clears the pending bit when interrupt is claimed in APLIC, but not clears it when the rectified input value is low. (e.g. IRQ source signal is low in the LEVEL_HIGH/Level1 mode). The software may receive an additional IRQ if the peripheral triggers one after the software clears the APLIC IRQ but before it clears the peripheral's IRQ. Thus, we also clear the pending bit via the rectified input value in the level-trigger mode. This change doesn't affect MSI delivery mode. Calling riscv_aplic_msi_irq_update() when IRQ pending is low will do nothing. Signed-off-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Chao Liu <chao.liu.zevorn@gmail.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260428160103.3551125-2-jim.shu@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/intc/riscv_aplic.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/hw/intc/riscv_aplic.c b/hw/intc/riscv_aplic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/riscv_aplic.c +++ b/hw/intc/riscv_aplic.c @@ -XXX,XX +XXX,XX @@ static void riscv_aplic_request(void *opaque, int irq, int level) } break; case APLIC_SOURCECFG_SM_LEVEL_HIGH: - if ((level > 0) && !(state & APLIC_ISTATE_PENDING)) { - riscv_aplic_set_pending_raw(aplic, irq, true); + if ((level > 0) != !!(state & APLIC_ISTATE_PENDING)) { + riscv_aplic_set_pending_raw(aplic, irq, level > 0); update = true; } break; case APLIC_SOURCECFG_SM_LEVEL_LOW: - if ((level <= 0) && !(state & APLIC_ISTATE_PENDING)) { - riscv_aplic_set_pending_raw(aplic, irq, true); + if ((level <= 0) != !!(state & APLIC_ISTATE_PENDING)) { + riscv_aplic_set_pending_raw(aplic, irq, level <= 0); update = true; } break; -- 2.53.0 From: Jim Shu <jim.shu@sifive.com> Clearing APLIC registers and qemu_irq in the reset function Signed-off-by: Jim Shu <jim.shu@sifive.com> Signed-off-by: Fea.Wang <fea.wang@sifive.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260428160103.3551125-3-jim.shu@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/intc/riscv_aplic.c | 45 ++++++++++++++++++++++++++++++++++++++----- 1 file changed, 40 insertions(+), 5 deletions(-) diff --git a/hw/intc/riscv_aplic.c b/hw/intc/riscv_aplic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/riscv_aplic.c +++ b/hw/intc/riscv_aplic.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps riscv_aplic_ops = { } }; +static void riscv_aplic_reset_enter(Object *obj, ResetType type) +{ + RISCVAPLICState *aplic = RISCV_APLIC(obj); + int i; + + aplic->domaincfg = 0; + memset(aplic->sourcecfg, 0, sizeof(uint32_t) * aplic->num_irqs); + memset(aplic->target, 0, sizeof(uint32_t) * aplic->num_irqs); + if (!aplic->msimode) { + for (i = 0; i < aplic->num_irqs; i++) { + aplic->target[i] = 1; + } + } + + for (i = 0; i < aplic->num_irqs ; i++) { + riscv_aplic_set_enabled_raw(aplic, i, false); + } + + /* Need to unlock [ms]msicfgaddrh.L */ + aplic->mmsicfgaddr = 0; + aplic->mmsicfgaddrH = 0; + aplic->smsicfgaddr = 0; + aplic->smsicfgaddrH = 0; + + if (!aplic->msimode) { + /* Reset IDC registers only in non-MSI mode */ + for (i = 0; i < aplic->num_harts; i++) { + aplic->idelivery[i] = 0; + aplic->iforce[i] = 0; + aplic->ithreshold[i] = 0; + } + + for (i = 0; i < aplic->num_harts; i++) { + qemu_irq_lower(aplic->external_irqs[i]); + } + } +} + static void riscv_aplic_realize(DeviceState *dev, Error **errp) { uint32_t i; @@ -XXX,XX +XXX,XX @@ static void riscv_aplic_realize(DeviceState *dev, Error **errp) aplic->sourcecfg = g_new0(uint32_t, aplic->num_irqs); aplic->state = g_new0(uint32_t, aplic->num_irqs); aplic->target = g_new0(uint32_t, aplic->num_irqs); - if (!aplic->msimode) { - for (i = 0; i < aplic->num_irqs; i++) { - aplic->target[i] = 1; - } - } aplic->idelivery = g_new0(uint32_t, aplic->num_harts); aplic->iforce = g_new0(uint32_t, aplic->num_harts); aplic->ithreshold = g_new0(uint32_t, aplic->num_harts); @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_riscv_aplic = { static void riscv_aplic_class_init(ObjectClass *klass, const void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); device_class_set_props(dc, riscv_aplic_properties); dc->realize = riscv_aplic_realize; + rc->phases.enter = riscv_aplic_reset_enter; dc->vmsd = &vmstate_riscv_aplic; } -- 2.53.0 From: Jim Shu <jim.shu@sifive.com> Clearing IMSIC registers and qemu_irq in the reset function Signed-off-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260428160103.3551125-4-jim.shu@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/intc/riscv_imsic.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/hw/intc/riscv_imsic.c b/hw/intc/riscv_imsic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/riscv_imsic.c +++ b/hw/intc/riscv_imsic.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps riscv_imsic_ops = { } }; +static void riscv_imsic_reset_enter(Object *obj, ResetType type) +{ + RISCVIMSICState *imsic = RISCV_IMSIC(obj); + int i; + + memset(imsic->eidelivery, 0, sizeof(uint32_t) * imsic->num_pages); + memset(imsic->eithreshold, 0, sizeof(uint32_t) * imsic->num_pages); + + for (i = 0; i < imsic->num_eistate; i++) { + imsic->eistate[i] &= ~IMSIC_EISTATE_ENABLED; + } + + for (i = 0; i < imsic->num_pages; i++) { + qemu_irq_lower(imsic->external_irqs[i]); + } +} + static void riscv_imsic_realize(DeviceState *dev, Error **errp) { RISCVIMSICState *imsic = RISCV_IMSIC(dev); @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_riscv_imsic = { static void riscv_imsic_class_init(ObjectClass *klass, const void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); device_class_set_props(dc, riscv_imsic_properties); dc->realize = riscv_imsic_realize; + rc->phases.enter = riscv_imsic_reset_enter; dc->vmsd = &vmstate_riscv_imsic; } -- 2.53.0 From: Jim Shu <jim.shu@sifive.com> Add the trace events for APLIC read/write functions. Signed-off-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260428160103.3551125-5-jim.shu@sifive.com> [ Changes by AF: - Init val to zero to avoid uninitialised build errors ] Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/intc/riscv_aplic.c | 63 ++++++++++++++++++++++++++----------------- hw/intc/trace-events | 4 +++ 2 files changed, 42 insertions(+), 25 deletions(-) diff --git a/hw/intc/riscv_aplic.c b/hw/intc/riscv_aplic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/riscv_aplic.c +++ b/hw/intc/riscv_aplic.c @@ -XXX,XX +XXX,XX @@ #include "system/tcg.h" #include "kvm/kvm_riscv.h" #include "migration/vmstate.h" +#include "trace.h" #define APLIC_MAX_IDC (1UL << 14) #define APLIC_MAX_SOURCE 1024 @@ -XXX,XX +XXX,XX @@ static void riscv_aplic_request(void *opaque, int irq, int level) static uint64_t riscv_aplic_read(void *opaque, hwaddr addr, unsigned size) { uint32_t irq, word, idc; + uint64_t val = 0; RISCVAPLICState *aplic = opaque; /* Reads must be 4 byte words */ @@ -XXX,XX +XXX,XX @@ static uint64_t riscv_aplic_read(void *opaque, hwaddr addr, unsigned size) } if (addr == APLIC_DOMAINCFG) { - return APLIC_DOMAINCFG_RDONLY | aplic->domaincfg | - (aplic->msimode ? APLIC_DOMAINCFG_DM : 0); + val = APLIC_DOMAINCFG_RDONLY | aplic->domaincfg | + (aplic->msimode ? APLIC_DOMAINCFG_DM : 0); } else if ((APLIC_SOURCECFG_BASE <= addr) && (addr < (APLIC_SOURCECFG_BASE + (aplic->num_irqs - 1) * 4))) { irq = ((addr - APLIC_SOURCECFG_BASE) >> 2) + 1; - return aplic->sourcecfg[irq]; + val = aplic->sourcecfg[irq]; } else if (aplic->mmode && aplic->msimode && (addr == APLIC_MMSICFGADDR)) { - return aplic->mmsicfgaddr; + val = aplic->mmsicfgaddr; } else if (aplic->mmode && aplic->msimode && (addr == APLIC_MMSICFGADDRH)) { - return aplic->mmsicfgaddrH; + val = aplic->mmsicfgaddrH; } else if (aplic->mmode && aplic->msimode && (addr == APLIC_SMSICFGADDR)) { /* @@ -XXX,XX +XXX,XX @@ static uint64_t riscv_aplic_read(void *opaque, hwaddr addr, unsigned size) * only zero in at least one of the supervisor-level child * domains). */ - return (aplic->num_children) ? aplic->smsicfgaddr : 0; + val = (aplic->num_children) ? aplic->smsicfgaddr : 0; } else if (aplic->mmode && aplic->msimode && (addr == APLIC_SMSICFGADDRH)) { - return (aplic->num_children) ? aplic->smsicfgaddrH : 0; + val = (aplic->num_children) ? aplic->smsicfgaddrH : 0; } else if ((APLIC_SETIP_BASE <= addr) && (addr < (APLIC_SETIP_BASE + aplic->bitfield_words * 4))) { word = (addr - APLIC_SETIP_BASE) >> 2; - return riscv_aplic_read_pending_word(aplic, word); + val = riscv_aplic_read_pending_word(aplic, word); } else if (addr == APLIC_SETIPNUM) { - return 0; + val = 0; } else if ((APLIC_CLRIP_BASE <= addr) && (addr < (APLIC_CLRIP_BASE + aplic->bitfield_words * 4))) { word = (addr - APLIC_CLRIP_BASE) >> 2; - return riscv_aplic_read_input_word(aplic, word); + val = riscv_aplic_read_input_word(aplic, word); } else if (addr == APLIC_CLRIPNUM) { - return 0; + val = 0; } else if ((APLIC_SETIE_BASE <= addr) && (addr < (APLIC_SETIE_BASE + aplic->bitfield_words * 4))) { word = (addr - APLIC_SETIE_BASE) >> 2; - return riscv_aplic_read_enabled_word(aplic, word); + val = riscv_aplic_read_enabled_word(aplic, word); } else if (addr == APLIC_SETIENUM) { - return 0; + val = 0; } else if ((APLIC_CLRIE_BASE <= addr) && (addr < (APLIC_CLRIE_BASE + aplic->bitfield_words * 4))) { - return 0; + val = 0; } else if (addr == APLIC_CLRIENUM) { - return 0; + val = 0; } else if (addr == APLIC_SETIPNUM_LE) { - return 0; + val = 0; } else if (addr == APLIC_SETIPNUM_BE) { - return 0; + val = 0; } else if (addr == APLIC_GENMSI) { - return (aplic->msimode) ? aplic->genmsi : 0; + val = (aplic->msimode) ? aplic->genmsi : 0; } else if ((APLIC_TARGET_BASE <= addr) && (addr < (APLIC_TARGET_BASE + (aplic->num_irqs - 1) * 4))) { irq = ((addr - APLIC_TARGET_BASE) >> 2) + 1; if (!riscv_aplic_source_active(aplic, irq)) { - return 0; + val = 0; + } else { + val = aplic->target[irq]; } - return aplic->target[irq]; } else if (!aplic->msimode && (APLIC_IDC_BASE <= addr) && (addr < (APLIC_IDC_BASE + aplic->num_harts * APLIC_IDC_SIZE))) { idc = (addr - APLIC_IDC_BASE) / APLIC_IDC_SIZE; switch (addr - (APLIC_IDC_BASE + idc * APLIC_IDC_SIZE)) { case APLIC_IDC_IDELIVERY: - return aplic->idelivery[idc]; + val = aplic->idelivery[idc]; + break; case APLIC_IDC_IFORCE: - return aplic->iforce[idc]; + val = aplic->iforce[idc]; + break; case APLIC_IDC_ITHRESHOLD: - return aplic->ithreshold[idc]; + val = aplic->ithreshold[idc]; + break; case APLIC_IDC_TOPI: - return riscv_aplic_idc_topi(aplic, idc); + val = riscv_aplic_idc_topi(aplic, idc); + break; case APLIC_IDC_CLAIMI: - return riscv_aplic_idc_claimi(aplic, idc); + val = riscv_aplic_idc_claimi(aplic, idc); + break; default: goto err; }; } + trace_riscv_aplic_read(addr, size, val); + return val; + err: qemu_log_mask(LOG_GUEST_ERROR, "%s: Invalid register read 0x%" HWADDR_PRIx "\n", @@ -XXX,XX +XXX,XX @@ static void riscv_aplic_write(void *opaque, hwaddr addr, uint64_t value, goto err; } + trace_riscv_aplic_write(addr, size, value); + if (addr == APLIC_DOMAINCFG) { /* Only IE bit writable at the moment */ value &= APLIC_DOMAINCFG_IE; diff --git a/hw/intc/trace-events b/hw/intc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/trace-events +++ b/hw/intc/trace-events @@ -XXX,XX +XXX,XX @@ loongarch_msi_set_irq(int irq_num) "set msi irq %d" loongarch_extioi_setirq(int irq, int level) "set extirq irq %d level %d" loongarch_extioi_readw(uint64_t addr, uint64_t val) "addr: 0x%"PRIx64 "val: 0x%" PRIx64 loongarch_extioi_writew(uint64_t addr, uint64_t val) "addr: 0x%"PRIx64 "val: 0x%" PRIx64 + +# riscv_aplic.c +riscv_aplic_read(uint64_t offset, unsigned size, uint64_t value) "offset: 0x%" PRIx64 ", size: %u, value: 0x%" PRIx64 +riscv_aplic_write(uint64_t offset, unsigned size, uint64_t value) "offset: 0x%" PRIx64 ", size: %u, value: 0x%" PRIx64 -- 2.53.0 From: Jay Chang <jay.chang@sifive.com> When software clears CMD_ILL or CQMF error bits by writing 1 to CQCSR, the IOMMU should re-check the command queue and continue processing pending commands if head != tail. Per RISC-V IOMMU specification : If command-queue access leads to a memory fault then the command-queue-memory-fault bit is set to 1 and the commandqueue stalls until this bit is cleared. To re-enable command processing, software should clear this bit by writing 1. Signed-off-by: Jay Chang <jay.chang@sifive.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Nutty Liu <nutty.liu@hotmail.com> Message-ID: <20260518070143.8405-1-jay.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/hw/riscv/riscv-iommu.c b/hw/riscv/riscv-iommu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.c +++ b/hw/riscv/riscv-iommu.c @@ -XXX,XX +XXX,XX @@ static void riscv_iommu_process_cq_control(RISCVIOMMUState *s) } riscv_iommu_reg_mod32(s, RISCV_IOMMU_REG_CQCSR, ctrl_set, ctrl_clr); + + /* + * After clearing error bits (CMD_ILL, CQMF), if queue is still active, + * re-process pending command. + */ + ctrl_set = riscv_iommu_reg_get32(s, RISCV_IOMMU_REG_CQCSR); + if ((ctrl_set & RISCV_IOMMU_CQCSR_CQON) && + !(ctrl_set & (RISCV_IOMMU_CQCSR_CMD_ILL | RISCV_IOMMU_CQCSR_CQMF))) { + riscv_iommu_process_cq_tail(s); + } } static void riscv_iommu_process_fq_control(RISCVIOMMUState *s) -- 2.53.0 From: Alistair Francis <alistair.francis@wdc.com> The following changes since commit da5006445a92bb7801f54a93452fac63ca2f634c: Merge tag 'python-pull-request' of https://gitlab.com/jsnow/qemu into staging (2022-04-21 15:16:52 -0700) are available in the Git repository at: git@github.com:alistair23/qemu.git tags/pull-riscv-to-apply-20220422-1 for you to fetch changes up to faee5441a038898f64b335dbaecab102ba406552: hw/riscv: boot: Support 64bit fdt address. (2022-04-22 10:35:16 +1000) ---------------------------------------------------------------- First RISC-V PR for QEMU 7.1 * Add support for Ibex SPI to OpenTitan * Add support for privileged spec version 1.12.0 * Use privileged spec version 1.12.0 for virt machine by default * Allow software access to MIP SEIP * Add initial support for the Sdtrig extension * Optimisations for vector extensions * Improvements to the misa ISA string * Add isa extenstion strings to the device tree * Don't allow `-bios` options with KVM machines * Fix NAPOT range computation overflow * Fix DT property mmu-type when CPU mmu option is disabled * Make RISC-V ACLINT mtime MMIO register writable * Add and enable native debug feature * Support 64bit fdt address. ---------------------------------------------------------------- Alistair Francis (2): target/riscv: cpu: Fixup indentation target/riscv: Allow software access to MIP SEIP Atish Patra (7): target/riscv: Define simpler privileged spec version numbering target/riscv: Add the privileged spec version 1.12.0 target/riscv: Introduce privilege version field in the CSR ops. target/riscv: Add support for mconfigptr target/riscv: Add *envcfg* CSRs support target/riscv: Enable privileged spec version 1.12 target/riscv: Add isa extenstion strings to the device tree Bin Meng (7): target/riscv: Add initial support for the Sdtrig extension target/riscv: debug: Implement debug related TCGCPUOps target/riscv: cpu: Add a config option for native debug target/riscv: csr: Hook debug CSR read/write target/riscv: machine: Add debug state description target/riscv: cpu: Enable native debug feature hw/core: tcg-cpu-ops.h: Update comments of debug_check_watchpoint() Dylan Jhong (1): hw/riscv: boot: Support 64bit fdt address. Frank Chang (3): hw/intc: Add .impl.[min|max]_access_size declaration in RISC-V ACLINT hw/intc: Support 32/64-bit mtimecmp and mtime accesses in RISC-V ACLINT hw/intc: Make RISC-V ACLINT mtime MMIO register writable Jim Shu (1): hw/intc: riscv_aclint: Add reset function of ACLINT devices Nicolas Pitre (1): target/riscv/pmp: fix NAPOT range computation overflow Niklas Cassel (1): hw/riscv: virt: fix DT property mmu-type when CPU mmu option is disabled Ralf Ramsauer (1): hw/riscv: virt: Exit if the user provided -bios in combination with KVM Richard Henderson (1): target/riscv: Use cpu_loop_exit_restore directly from mmu faults Tsukasa OI (1): target/riscv: misa to ISA string conversion fix Weiwei Li (3): target/riscv: optimize condition assign for scale < 0 target/riscv: optimize helper for vmv<nr>r.v target/riscv: fix start byte for vmv<nf>r.v when vstart != 0 Wilfred Mallawa (2): hw/ssi: Add Ibex SPI device model riscv: opentitan: Connect opentitan SPI Host include/hw/core/tcg-cpu-ops.h | 1 + include/hw/intc/riscv_aclint.h | 1 + include/hw/riscv/boot.h | 4 +- include/hw/riscv/opentitan.h | 30 +- include/hw/ssi/ibex_spi_host.h | 94 +++++ target/riscv/cpu.h | 40 ++- target/riscv/cpu_bits.h | 40 +++ target/riscv/debug.h | 114 ++++++ target/riscv/helper.h | 5 +- hw/intc/riscv_aclint.c | 144 ++++++-- hw/riscv/boot.c | 12 +- hw/riscv/opentitan.c | 36 +- hw/riscv/virt.c | 24 +- hw/ssi/ibex_spi_host.c | 612 ++++++++++++++++++++++++++++++++ target/riscv/cpu.c | 120 ++++++- target/riscv/cpu_helper.c | 10 +- target/riscv/csr.c | 282 +++++++++++++-- target/riscv/debug.c | 441 +++++++++++++++++++++++ target/riscv/machine.c | 55 +++ target/riscv/pmp.c | 14 +- target/riscv/vector_helper.c | 31 +- target/riscv/insn_trans/trans_rvv.c.inc | 25 +- hw/ssi/meson.build | 1 + hw/ssi/trace-events | 7 + target/riscv/meson.build | 1 + 25 files changed, 1971 insertions(+), 173 deletions(-) create mode 100644 include/hw/ssi/ibex_spi_host.h create mode 100644 target/riscv/debug.h create mode 100644 hw/ssi/ibex_spi_host.c create mode 100644 target/riscv/debug.c From: Wilfred Mallawa <wilfred.mallawa@wdc.com> Adds the SPI_HOST device model for ibex. The device specification is as per [1]. The model has been tested on opentitan with spi_host unit tests written for TockOS. [1] https://docs.opentitan.org/hw/ip/spi_host/doc/ Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220303045426.511588-1-alistair.francis@opensource.wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/ssi/ibex_spi_host.h | 94 +++++ hw/ssi/ibex_spi_host.c | 612 +++++++++++++++++++++++++++++++++ hw/ssi/meson.build | 1 + hw/ssi/trace-events | 7 + 4 files changed, 714 insertions(+) create mode 100644 include/hw/ssi/ibex_spi_host.h create mode 100644 hw/ssi/ibex_spi_host.c diff --git a/include/hw/ssi/ibex_spi_host.h b/include/hw/ssi/ibex_spi_host.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/ssi/ibex_spi_host.h @@ -XXX,XX +XXX,XX @@ + +/* + * QEMU model of the Ibex SPI Controller + * SPEC Reference: https://docs.opentitan.org/hw/ip/spi_host/doc/ + * + * Copyright (C) 2022 Western Digital + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef IBEX_SPI_HOST_H +#define IBEX_SPI_HOST_H + +#include "hw/sysbus.h" +#include "hw/hw.h" +#include "hw/ssi/ssi.h" +#include "qemu/fifo8.h" +#include "qom/object.h" +#include "hw/registerfields.h" +#include "qemu/timer.h" + +#define TYPE_IBEX_SPI_HOST "ibex-spi" +#define IBEX_SPI_HOST(obj) \ + OBJECT_CHECK(IbexSPIHostState, (obj), TYPE_IBEX_SPI_HOST) + +/* SPI Registers */ +#define IBEX_SPI_HOST_INTR_STATE (0x00 / 4) /* rw */ +#define IBEX_SPI_HOST_INTR_ENABLE (0x04 / 4) /* rw */ +#define IBEX_SPI_HOST_INTR_TEST (0x08 / 4) /* wo */ +#define IBEX_SPI_HOST_ALERT_TEST (0x0c / 4) /* wo */ +#define IBEX_SPI_HOST_CONTROL (0x10 / 4) /* rw */ +#define IBEX_SPI_HOST_STATUS (0x14 / 4) /* ro */ +#define IBEX_SPI_HOST_CONFIGOPTS (0x18 / 4) /* rw */ +#define IBEX_SPI_HOST_CSID (0x1c / 4) /* rw */ +#define IBEX_SPI_HOST_COMMAND (0x20 / 4) /* wo */ +/* RX/TX Modelled by FIFO */ +#define IBEX_SPI_HOST_RXDATA (0x24 / 4) +#define IBEX_SPI_HOST_TXDATA (0x28 / 4) + +#define IBEX_SPI_HOST_ERROR_ENABLE (0x2c / 4) /* rw */ +#define IBEX_SPI_HOST_ERROR_STATUS (0x30 / 4) /* rw */ +#define IBEX_SPI_HOST_EVENT_ENABLE (0x34 / 4) /* rw */ + +/* FIFO Len in Bytes */ +#define IBEX_SPI_HOST_TXFIFO_LEN 288 +#define IBEX_SPI_HOST_RXFIFO_LEN 256 + +/* Max Register (Based on addr) */ +#define IBEX_SPI_HOST_MAX_REGS (IBEX_SPI_HOST_EVENT_ENABLE + 1) + +/* MISC */ +#define TX_INTERRUPT_TRIGGER_DELAY_NS 100 +#define BIDIRECTIONAL_TRANSFER 3 + +typedef struct { + /* <private> */ + SysBusDevice parent_obj; + + /* <public> */ + MemoryRegion mmio; + uint32_t regs[IBEX_SPI_HOST_MAX_REGS]; + /* Multi-reg that sets config opts per CS */ + uint32_t *config_opts; + Fifo8 rx_fifo; + Fifo8 tx_fifo; + QEMUTimer *fifo_trigger_handle; + + qemu_irq event; + qemu_irq host_err; + uint32_t num_cs; + qemu_irq *cs_lines; + SSIBus *ssi; + + /* Used to track the init status, for replicating TXDATA ghost writes */ + bool init_status; +} IbexSPIHostState; + +#endif diff --git a/hw/ssi/ibex_spi_host.c b/hw/ssi/ibex_spi_host.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/ssi/ibex_spi_host.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU model of the Ibex SPI Controller + * SPEC Reference: https://docs.opentitan.org/hw/ip/spi_host/doc/ + * + * Copyright (C) 2022 Western Digital + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "hw/ssi/ibex_spi_host.h" +#include "hw/irq.h" +#include "hw/qdev-properties.h" +#include "hw/qdev-properties-system.h" +#include "migration/vmstate.h" +#include "trace.h" + +REG32(INTR_STATE, 0x00) + FIELD(INTR_STATE, ERROR, 0, 1) + FIELD(INTR_STATE, SPI_EVENT, 1, 1) +REG32(INTR_ENABLE, 0x04) + FIELD(INTR_ENABLE, ERROR, 0, 1) + FIELD(INTR_ENABLE, SPI_EVENT, 1, 1) +REG32(INTR_TEST, 0x08) + FIELD(INTR_TEST, ERROR, 0, 1) + FIELD(INTR_TEST, SPI_EVENT, 1, 1) +REG32(ALERT_TEST, 0x0c) + FIELD(ALERT_TEST, FETAL_TEST, 0, 1) +REG32(CONTROL, 0x10) + FIELD(CONTROL, RX_WATERMARK, 0, 8) + FIELD(CONTROL, TX_WATERMARK, 1, 8) + FIELD(CONTROL, OUTPUT_EN, 29, 1) + FIELD(CONTROL, SW_RST, 30, 1) + FIELD(CONTROL, SPIEN, 31, 1) +REG32(STATUS, 0x14) + FIELD(STATUS, TXQD, 0, 8) + FIELD(STATUS, RXQD, 18, 8) + FIELD(STATUS, CMDQD, 16, 3) + FIELD(STATUS, RXWM, 20, 1) + FIELD(STATUS, BYTEORDER, 22, 1) + FIELD(STATUS, RXSTALL, 23, 1) + FIELD(STATUS, RXEMPTY, 24, 1) + FIELD(STATUS, RXFULL, 25, 1) + FIELD(STATUS, TXWM, 26, 1) + FIELD(STATUS, TXSTALL, 27, 1) + FIELD(STATUS, TXEMPTY, 28, 1) + FIELD(STATUS, TXFULL, 29, 1) + FIELD(STATUS, ACTIVE, 30, 1) + FIELD(STATUS, READY, 31, 1) +REG32(CONFIGOPTS, 0x18) + FIELD(CONFIGOPTS, CLKDIV_0, 0, 16) + FIELD(CONFIGOPTS, CSNIDLE_0, 16, 4) + FIELD(CONFIGOPTS, CSNTRAIL_0, 20, 4) + FIELD(CONFIGOPTS, CSNLEAD_0, 24, 4) + FIELD(CONFIGOPTS, FULLCYC_0, 29, 1) + FIELD(CONFIGOPTS, CPHA_0, 30, 1) + FIELD(CONFIGOPTS, CPOL_0, 31, 1) +REG32(CSID, 0x1c) + FIELD(CSID, CSID, 0, 32) +REG32(COMMAND, 0x20) + FIELD(COMMAND, LEN, 0, 8) + FIELD(COMMAND, CSAAT, 9, 1) + FIELD(COMMAND, SPEED, 10, 2) + FIELD(COMMAND, DIRECTION, 12, 2) +REG32(ERROR_ENABLE, 0x2c) + FIELD(ERROR_ENABLE, CMDBUSY, 0, 1) + FIELD(ERROR_ENABLE, OVERFLOW, 1, 1) + FIELD(ERROR_ENABLE, UNDERFLOW, 2, 1) + FIELD(ERROR_ENABLE, CMDINVAL, 3, 1) + FIELD(ERROR_ENABLE, CSIDINVAL, 4, 1) +REG32(ERROR_STATUS, 0x30) + FIELD(ERROR_STATUS, CMDBUSY, 0, 1) + FIELD(ERROR_STATUS, OVERFLOW, 1, 1) + FIELD(ERROR_STATUS, UNDERFLOW, 2, 1) + FIELD(ERROR_STATUS, CMDINVAL, 3, 1) + FIELD(ERROR_STATUS, CSIDINVAL, 4, 1) + FIELD(ERROR_STATUS, ACCESSINVAL, 5, 1) +REG32(EVENT_ENABLE, 0x30) + FIELD(EVENT_ENABLE, RXFULL, 0, 1) + FIELD(EVENT_ENABLE, TXEMPTY, 1, 1) + FIELD(EVENT_ENABLE, RXWM, 2, 1) + FIELD(EVENT_ENABLE, TXWM, 3, 1) + FIELD(EVENT_ENABLE, READY, 4, 1) + FIELD(EVENT_ENABLE, IDLE, 5, 1) + +static inline uint8_t div4_round_up(uint8_t dividend) +{ + return (dividend + 3) / 4; +} + +static void ibex_spi_rxfifo_reset(IbexSPIHostState *s) +{ + /* Empty the RX FIFO and assert RXEMPTY */ + fifo8_reset(&s->rx_fifo); + s->regs[IBEX_SPI_HOST_STATUS] &= ~R_STATUS_RXFULL_MASK; + s->regs[IBEX_SPI_HOST_STATUS] |= R_STATUS_RXEMPTY_MASK; +} + +static void ibex_spi_txfifo_reset(IbexSPIHostState *s) +{ + /* Empty the TX FIFO and assert TXEMPTY */ + fifo8_reset(&s->tx_fifo); + s->regs[IBEX_SPI_HOST_STATUS] &= ~R_STATUS_TXFULL_MASK; + s->regs[IBEX_SPI_HOST_STATUS] |= R_STATUS_TXEMPTY_MASK; +} + +static void ibex_spi_host_reset(DeviceState *dev) +{ + IbexSPIHostState *s = IBEX_SPI_HOST(dev); + trace_ibex_spi_host_reset("Resetting Ibex SPI"); + + /* SPI Host Register Reset */ + s->regs[IBEX_SPI_HOST_INTR_STATE] = 0x00; + s->regs[IBEX_SPI_HOST_INTR_ENABLE] = 0x00; + s->regs[IBEX_SPI_HOST_INTR_TEST] = 0x00; + s->regs[IBEX_SPI_HOST_ALERT_TEST] = 0x00; + s->regs[IBEX_SPI_HOST_CONTROL] = 0x7f; + s->regs[IBEX_SPI_HOST_STATUS] = 0x00; + s->regs[IBEX_SPI_HOST_CONFIGOPTS] = 0x00; + s->regs[IBEX_SPI_HOST_CSID] = 0x00; + s->regs[IBEX_SPI_HOST_COMMAND] = 0x00; + /* RX/TX Modelled by FIFO */ + s->regs[IBEX_SPI_HOST_RXDATA] = 0x00; + s->regs[IBEX_SPI_HOST_TXDATA] = 0x00; + + s->regs[IBEX_SPI_HOST_ERROR_ENABLE] = 0x1F; + s->regs[IBEX_SPI_HOST_ERROR_STATUS] = 0x00; + s->regs[IBEX_SPI_HOST_EVENT_ENABLE] = 0x00; + + ibex_spi_rxfifo_reset(s); + ibex_spi_txfifo_reset(s); + + s->init_status = true; + return; +} + +/* + * Check if we need to trigger an interrupt. + * The two interrupts lines (host_err and event) can + * be enabled separately in 'IBEX_SPI_HOST_INTR_ENABLE'. + * + * Interrupts are triggered based on the ones + * enabled in the `IBEX_SPI_HOST_EVENT_ENABLE` and `IBEX_SPI_HOST_ERROR_ENABLE`. + */ +static void ibex_spi_host_irq(IbexSPIHostState *s) +{ + bool error_en = s->regs[IBEX_SPI_HOST_INTR_ENABLE] + & R_INTR_ENABLE_ERROR_MASK; + bool event_en = s->regs[IBEX_SPI_HOST_INTR_ENABLE] + & R_INTR_ENABLE_SPI_EVENT_MASK; + bool err_pending = s->regs[IBEX_SPI_HOST_INTR_STATE] + & R_INTR_STATE_ERROR_MASK; + bool status_pending = s->regs[IBEX_SPI_HOST_INTR_STATE] + & R_INTR_STATE_SPI_EVENT_MASK; + int err_irq = 0, event_irq = 0; + + /* Error IRQ enabled and Error IRQ Cleared*/ + if (error_en && !err_pending) { + /* Event enabled, Interrupt Test Error */ + if (s->regs[IBEX_SPI_HOST_INTR_TEST] & R_INTR_TEST_ERROR_MASK) { + err_irq = 1; + } else if ((s->regs[IBEX_SPI_HOST_ERROR_ENABLE] + & R_ERROR_ENABLE_CMDBUSY_MASK) && + s->regs[IBEX_SPI_HOST_ERROR_STATUS] + & R_ERROR_STATUS_CMDBUSY_MASK) { + /* Wrote to COMMAND when not READY */ + err_irq = 1; + } else if ((s->regs[IBEX_SPI_HOST_ERROR_ENABLE] + & R_ERROR_ENABLE_CMDINVAL_MASK) && + s->regs[IBEX_SPI_HOST_ERROR_STATUS] + & R_ERROR_STATUS_CMDINVAL_MASK) { + /* Invalid command segment */ + err_irq = 1; + } else if ((s->regs[IBEX_SPI_HOST_ERROR_ENABLE] + & R_ERROR_ENABLE_CSIDINVAL_MASK) && + s->regs[IBEX_SPI_HOST_ERROR_STATUS] + & R_ERROR_STATUS_CSIDINVAL_MASK) { + /* Invalid value for CSID */ + err_irq = 1; + } + if (err_irq) { + s->regs[IBEX_SPI_HOST_INTR_STATE] |= R_INTR_STATE_ERROR_MASK; + } + qemu_set_irq(s->host_err, err_irq); + } + + /* Event IRQ Enabled and Event IRQ Cleared */ + if (event_en && !status_pending) { + if (s->regs[IBEX_SPI_HOST_INTR_TEST] & R_INTR_TEST_SPI_EVENT_MASK) { + /* Event enabled, Interrupt Test Event */ + event_irq = 1; + } else if ((s->regs[IBEX_SPI_HOST_EVENT_ENABLE] + & R_EVENT_ENABLE_READY_MASK) && + (s->regs[IBEX_SPI_HOST_STATUS] & R_STATUS_READY_MASK)) { + /* SPI Host ready for next command */ + event_irq = 1; + } else if ((s->regs[IBEX_SPI_HOST_EVENT_ENABLE] + & R_EVENT_ENABLE_TXEMPTY_MASK) && + (s->regs[IBEX_SPI_HOST_STATUS] & R_STATUS_TXEMPTY_MASK)) { + /* SPI TXEMPTY, TXFIFO drained */ + event_irq = 1; + } else if ((s->regs[IBEX_SPI_HOST_EVENT_ENABLE] + & R_EVENT_ENABLE_RXFULL_MASK) && + (s->regs[IBEX_SPI_HOST_STATUS] & R_STATUS_RXFULL_MASK)) { + /* SPI RXFULL, RXFIFO full */ + event_irq = 1; + } + if (event_irq) { + s->regs[IBEX_SPI_HOST_INTR_STATE] |= R_INTR_STATE_SPI_EVENT_MASK; + } + qemu_set_irq(s->event, event_irq); + } +} + +static void ibex_spi_host_transfer(IbexSPIHostState *s) +{ + uint32_t rx, tx; + /* Get num of one byte transfers */ + uint8_t segment_len = ((s->regs[IBEX_SPI_HOST_COMMAND] & R_COMMAND_LEN_MASK) + >> R_COMMAND_LEN_SHIFT); + while (segment_len > 0) { + if (fifo8_is_empty(&s->tx_fifo)) { + /* Assert Stall */ + s->regs[IBEX_SPI_HOST_STATUS] |= R_STATUS_TXSTALL_MASK; + break; + } else if (fifo8_is_full(&s->rx_fifo)) { + /* Assert Stall */ + s->regs[IBEX_SPI_HOST_STATUS] |= R_STATUS_RXSTALL_MASK; + break; + } else { + tx = fifo8_pop(&s->tx_fifo); + } + + rx = ssi_transfer(s->ssi, tx); + + trace_ibex_spi_host_transfer(tx, rx); + + if (!fifo8_is_full(&s->rx_fifo)) { + fifo8_push(&s->rx_fifo, rx); + } else { + /* Assert RXFULL */ + s->regs[IBEX_SPI_HOST_STATUS] |= R_STATUS_RXFULL_MASK; + } + --segment_len; + } + + /* Assert Ready */ + s->regs[IBEX_SPI_HOST_STATUS] |= R_STATUS_READY_MASK; + /* Set RXQD */ + s->regs[IBEX_SPI_HOST_STATUS] &= ~R_STATUS_RXQD_MASK; + s->regs[IBEX_SPI_HOST_STATUS] |= (R_STATUS_RXQD_MASK + & div4_round_up(segment_len)); + /* Set TXQD */ + s->regs[IBEX_SPI_HOST_STATUS] &= ~R_STATUS_TXQD_MASK; + s->regs[IBEX_SPI_HOST_STATUS] |= (fifo8_num_used(&s->tx_fifo) / 4) + & R_STATUS_TXQD_MASK; + /* Clear TXFULL */ + s->regs[IBEX_SPI_HOST_STATUS] &= ~R_STATUS_TXFULL_MASK; + /* Assert TXEMPTY and drop remaining bytes that exceed segment_len */ + ibex_spi_txfifo_reset(s); + /* Reset RXEMPTY */ + s->regs[IBEX_SPI_HOST_STATUS] &= ~R_STATUS_RXEMPTY_MASK; + + ibex_spi_host_irq(s); +} + +static uint64_t ibex_spi_host_read(void *opaque, hwaddr addr, + unsigned int size) +{ + IbexSPIHostState *s = opaque; + uint32_t rc = 0; + uint8_t rx_byte = 0; + + trace_ibex_spi_host_read(addr, size); + + /* Match reg index */ + addr = addr >> 2; + switch (addr) { + /* Skipping any W/O registers */ + case IBEX_SPI_HOST_INTR_STATE...IBEX_SPI_HOST_INTR_ENABLE: + case IBEX_SPI_HOST_CONTROL...IBEX_SPI_HOST_STATUS: + rc = s->regs[addr]; + break; + case IBEX_SPI_HOST_CSID: + rc = s->regs[addr]; + break; + case IBEX_SPI_HOST_CONFIGOPTS: + rc = s->config_opts[s->regs[IBEX_SPI_HOST_CSID]]; + break; + case IBEX_SPI_HOST_TXDATA: + rc = s->regs[addr]; + break; + case IBEX_SPI_HOST_RXDATA: + /* Clear RXFULL */ + s->regs[IBEX_SPI_HOST_STATUS] &= ~R_STATUS_RXFULL_MASK; + + for (int i = 0; i < 4; ++i) { + if (fifo8_is_empty(&s->rx_fifo)) { + /* Assert RXEMPTY, no IRQ */ + s->regs[IBEX_SPI_HOST_STATUS] |= R_STATUS_RXEMPTY_MASK; + s->regs[IBEX_SPI_HOST_ERROR_STATUS] |= + R_ERROR_STATUS_UNDERFLOW_MASK; + return rc; + } + rx_byte = fifo8_pop(&s->rx_fifo); + rc |= rx_byte << (i * 8); + } + break; + case IBEX_SPI_HOST_ERROR_ENABLE...IBEX_SPI_HOST_EVENT_ENABLE: + rc = s->regs[addr]; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, "Bad offset 0x%" HWADDR_PRIx "\n", + addr << 2); + } + return rc; +} + + +static void ibex_spi_host_write(void *opaque, hwaddr addr, + uint64_t val64, unsigned int size) +{ + IbexSPIHostState *s = opaque; + uint32_t val32 = val64; + uint32_t shift_mask = 0xff; + uint8_t txqd_len; + + trace_ibex_spi_host_write(addr, size, val64); + + /* Match reg index */ + addr = addr >> 2; + + switch (addr) { + /* Skipping any R/O registers */ + case IBEX_SPI_HOST_INTR_STATE...IBEX_SPI_HOST_INTR_ENABLE: + s->regs[addr] = val32; + break; + case IBEX_SPI_HOST_INTR_TEST: + s->regs[addr] = val32; + ibex_spi_host_irq(s); + break; + case IBEX_SPI_HOST_ALERT_TEST: + s->regs[addr] = val32; + qemu_log_mask(LOG_UNIMP, + "%s: SPI_ALERT_TEST is not supported\n", __func__); + break; + case IBEX_SPI_HOST_CONTROL: + s->regs[addr] = val32; + + if (val32 & R_CONTROL_SW_RST_MASK) { + ibex_spi_host_reset((DeviceState *)s); + /* Clear active if any */ + s->regs[IBEX_SPI_HOST_STATUS] &= ~R_STATUS_ACTIVE_MASK; + } + + if (val32 & R_CONTROL_OUTPUT_EN_MASK) { + qemu_log_mask(LOG_UNIMP, + "%s: CONTROL_OUTPUT_EN is not supported\n", __func__); + } + break; + case IBEX_SPI_HOST_CONFIGOPTS: + /* Update the respective config-opts register based on CSIDth index */ + s->config_opts[s->regs[IBEX_SPI_HOST_CSID]] = val32; + qemu_log_mask(LOG_UNIMP, + "%s: CONFIGOPTS Hardware settings not supported\n", + __func__); + break; + case IBEX_SPI_HOST_CSID: + if (val32 >= s->num_cs) { + /* CSID exceeds max num_cs */ + s->regs[IBEX_SPI_HOST_ERROR_STATUS] |= + R_ERROR_STATUS_CSIDINVAL_MASK; + ibex_spi_host_irq(s); + return; + } + s->regs[addr] = val32; + break; + case IBEX_SPI_HOST_COMMAND: + s->regs[addr] = val32; + + /* STALL, IP not enabled */ + if (!(s->regs[IBEX_SPI_HOST_CONTROL] & R_CONTROL_SPIEN_MASK)) { + return; + } + + /* SPI not ready, IRQ Error */ + if (!(s->regs[IBEX_SPI_HOST_STATUS] & R_STATUS_READY_MASK)) { + s->regs[IBEX_SPI_HOST_ERROR_STATUS] |= R_ERROR_STATUS_CMDBUSY_MASK; + ibex_spi_host_irq(s); + return; + } + /* Assert Not Ready */ + s->regs[IBEX_SPI_HOST_STATUS] &= ~R_STATUS_READY_MASK; + + if (((val32 & R_COMMAND_DIRECTION_MASK) >> R_COMMAND_DIRECTION_SHIFT) + != BIDIRECTIONAL_TRANSFER) { + qemu_log_mask(LOG_UNIMP, + "%s: Rx Only/Tx Only are not supported\n", __func__); + } + + if (val32 & R_COMMAND_CSAAT_MASK) { + qemu_log_mask(LOG_UNIMP, + "%s: CSAAT is not supported\n", __func__); + } + if (val32 & R_COMMAND_SPEED_MASK) { + qemu_log_mask(LOG_UNIMP, + "%s: SPEED is not supported\n", __func__); + } + + /* Set Transfer Callback */ + timer_mod(s->fifo_trigger_handle, + qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + + (TX_INTERRUPT_TRIGGER_DELAY_NS)); + + break; + case IBEX_SPI_HOST_TXDATA: + /* + * This is a hardware `feature` where + * the first word written TXDATA after init is omitted entirely + */ + if (s->init_status) { + s->init_status = false; + return; + } + + for (int i = 0; i < 4; ++i) { + /* Attempting to write when TXFULL */ + if (fifo8_is_full(&s->tx_fifo)) { + /* Assert RXEMPTY, no IRQ */ + s->regs[IBEX_SPI_HOST_STATUS] |= R_STATUS_TXFULL_MASK; + s->regs[IBEX_SPI_HOST_ERROR_STATUS] |= + R_ERROR_STATUS_OVERFLOW_MASK; + ibex_spi_host_irq(s); + return; + } + /* Byte ordering is set by the IP */ + if ((s->regs[IBEX_SPI_HOST_STATUS] & + R_STATUS_BYTEORDER_MASK) == 0) { + /* LE: LSB transmitted first (default for ibex processor) */ + shift_mask = 0xff << (i * 8); + } else { + /* BE: MSB transmitted first */ + qemu_log_mask(LOG_UNIMP, + "%s: Big endian is not supported\n", __func__); + } + + fifo8_push(&s->tx_fifo, (val32 & shift_mask) >> (i * 8)); + } + + /* Reset TXEMPTY */ + s->regs[IBEX_SPI_HOST_STATUS] &= ~R_STATUS_TXEMPTY_MASK; + /* Update TXQD */ + txqd_len = (s->regs[IBEX_SPI_HOST_STATUS] & + R_STATUS_TXQD_MASK) >> R_STATUS_TXQD_SHIFT; + /* Partial bytes (size < 4) are padded, in words. */ + txqd_len += 1; + s->regs[IBEX_SPI_HOST_STATUS] &= ~R_STATUS_TXQD_MASK; + s->regs[IBEX_SPI_HOST_STATUS] |= txqd_len; + /* Assert Ready */ + s->regs[IBEX_SPI_HOST_STATUS] |= R_STATUS_READY_MASK; + break; + case IBEX_SPI_HOST_ERROR_ENABLE: + s->regs[addr] = val32; + + if (val32 & R_ERROR_ENABLE_CMDINVAL_MASK) { + qemu_log_mask(LOG_UNIMP, + "%s: Segment Length is not supported\n", __func__); + } + break; + case IBEX_SPI_HOST_ERROR_STATUS: + /* + * Indicates that any errors that have occurred. + * When an error occurs, the corresponding bit must be cleared + * here before issuing any further commands + */ + s->regs[addr] = val32; + break; + case IBEX_SPI_HOST_EVENT_ENABLE: + /* Controls which classes of SPI events raise an interrupt. */ + s->regs[addr] = val32; + + if (val32 & R_EVENT_ENABLE_RXWM_MASK) { + qemu_log_mask(LOG_UNIMP, + "%s: RXWM is not supported\n", __func__); + } + if (val32 & R_EVENT_ENABLE_TXWM_MASK) { + qemu_log_mask(LOG_UNIMP, + "%s: TXWM is not supported\n", __func__); + } + + if (val32 & R_EVENT_ENABLE_IDLE_MASK) { + qemu_log_mask(LOG_UNIMP, + "%s: IDLE is not supported\n", __func__); + } + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, "Bad offset 0x%" HWADDR_PRIx "\n", + addr << 2); + } +} + +static const MemoryRegionOps ibex_spi_ops = { + .read = ibex_spi_host_read, + .write = ibex_spi_host_write, + /* Ibex default LE */ + .endianness = DEVICE_LITTLE_ENDIAN, +}; + +static Property ibex_spi_properties[] = { + DEFINE_PROP_UINT32("num_cs", IbexSPIHostState, num_cs, 1), + DEFINE_PROP_END_OF_LIST(), +}; + +static const VMStateDescription vmstate_ibex = { + .name = TYPE_IBEX_SPI_HOST, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, IbexSPIHostState, IBEX_SPI_HOST_MAX_REGS), + VMSTATE_VARRAY_UINT32(config_opts, IbexSPIHostState, + num_cs, 0, vmstate_info_uint32, uint32_t), + VMSTATE_FIFO8(rx_fifo, IbexSPIHostState), + VMSTATE_FIFO8(tx_fifo, IbexSPIHostState), + VMSTATE_TIMER_PTR(fifo_trigger_handle, IbexSPIHostState), + VMSTATE_BOOL(init_status, IbexSPIHostState), + VMSTATE_END_OF_LIST() + } +}; + +static void fifo_trigger_update(void *opaque) +{ + IbexSPIHostState *s = opaque; + ibex_spi_host_transfer(s); +} + +static void ibex_spi_host_realize(DeviceState *dev, Error **errp) +{ + IbexSPIHostState *s = IBEX_SPI_HOST(dev); + int i; + + s->ssi = ssi_create_bus(dev, "ssi"); + s->cs_lines = g_new0(qemu_irq, s->num_cs); + + for (i = 0; i < s->num_cs; ++i) { + sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->cs_lines[i]); + } + + /* Setup CONFIGOPTS Multi-register */ + s->config_opts = g_new0(uint32_t, s->num_cs); + + /* Setup FIFO Interrupt Timer */ + s->fifo_trigger_handle = timer_new_ns(QEMU_CLOCK_VIRTUAL, + fifo_trigger_update, s); + + /* FIFO sizes as per OT Spec */ + fifo8_create(&s->tx_fifo, IBEX_SPI_HOST_TXFIFO_LEN); + fifo8_create(&s->rx_fifo, IBEX_SPI_HOST_RXFIFO_LEN); +} + +static void ibex_spi_host_init(Object *obj) +{ + IbexSPIHostState *s = IBEX_SPI_HOST(obj); + + sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->host_err); + sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->event); + + memory_region_init_io(&s->mmio, obj, &ibex_spi_ops, s, + TYPE_IBEX_SPI_HOST, 0x1000); + sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio); +} + +static void ibex_spi_host_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + dc->realize = ibex_spi_host_realize; + dc->reset = ibex_spi_host_reset; + dc->vmsd = &vmstate_ibex; + device_class_set_props(dc, ibex_spi_properties); +} + +static const TypeInfo ibex_spi_host_info = { + .name = TYPE_IBEX_SPI_HOST, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(IbexSPIHostState), + .instance_init = ibex_spi_host_init, + .class_init = ibex_spi_host_class_init, +}; + +static void ibex_spi_host_register_types(void) +{ + type_register_static(&ibex_spi_host_info); +} + +type_init(ibex_spi_host_register_types) diff --git a/hw/ssi/meson.build b/hw/ssi/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/meson.build +++ b/hw/ssi/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_XILINX_SPIPS', if_true: files('xilinx_spips.c')) softmmu_ss.add(when: 'CONFIG_XLNX_VERSAL', if_true: files('xlnx-versal-ospi.c')) softmmu_ss.add(when: 'CONFIG_IMX', if_true: files('imx_spi.c')) softmmu_ss.add(when: 'CONFIG_OMAP', if_true: files('omap_spi.c')) +softmmu_ss.add(when: 'CONFIG_IBEX', if_true: files('ibex_spi_host.c')) diff --git a/hw/ssi/trace-events b/hw/ssi/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/trace-events +++ b/hw/ssi/trace-events @@ -XXX,XX +XXX,XX @@ npcm7xx_fiu_ctrl_read(const char *id, uint64_t addr, uint32_t data) "%s offset: npcm7xx_fiu_ctrl_write(const char *id, uint64_t addr, uint32_t data) "%s offset: 0x%04" PRIx64 " value: 0x%08" PRIx32 npcm7xx_fiu_flash_read(const char *id, int cs, uint64_t addr, unsigned int size, uint64_t value) "%s[%d] offset: 0x%08" PRIx64 " size: %u value: 0x%" PRIx64 npcm7xx_fiu_flash_write(const char *id, unsigned cs, uint64_t addr, unsigned int size, uint64_t value) "%s[%d] offset: 0x%08" PRIx64 " size: %u value: 0x%" PRIx64 + +# ibex_spi_host.c + +ibex_spi_host_reset(const char *msg) "%s" +ibex_spi_host_transfer(uint32_t tx_data, uint32_t rx_data) "tx_data: 0x%" PRIx32 " rx_data: @0x%" PRIx32 +ibex_spi_host_write(uint64_t addr, uint32_t size, uint64_t data) "@0x%" PRIx64 " size %u: 0x%" PRIx64 +ibex_spi_host_read(uint64_t addr, uint32_t size) "@0x%" PRIx64 " size %u:" -- 2.35.1 From: Wilfred Mallawa <wilfred.mallawa@wdc.com> Connect spi host[1/0] to opentitan. Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220303045426.511588-2-alistair.francis@opensource.wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/riscv/opentitan.h | 30 +++++++++++++++++++++--------- hw/riscv/opentitan.c | 36 ++++++++++++++++++++++++++++++++---- 2 files changed, 53 insertions(+), 13 deletions(-) diff --git a/include/hw/riscv/opentitan.h b/include/hw/riscv/opentitan.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/riscv/opentitan.h +++ b/include/hw/riscv/opentitan.h @@ -XXX,XX +XXX,XX @@ #include "hw/intc/sifive_plic.h" #include "hw/char/ibex_uart.h" #include "hw/timer/ibex_timer.h" +#include "hw/ssi/ibex_spi_host.h" #include "qom/object.h" #define TYPE_RISCV_IBEX_SOC "riscv.lowrisc.ibex.soc" OBJECT_DECLARE_SIMPLE_TYPE(LowRISCIbexSoCState, RISCV_IBEX_SOC) +enum { + OPENTITAN_SPI_HOST0, + OPENTITAN_SPI_HOST1, + OPENTITAN_NUM_SPI_HOSTS, +}; + struct LowRISCIbexSoCState { /*< private >*/ SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ struct LowRISCIbexSoCState { SiFivePLICState plic; IbexUartState uart; IbexTimerState timer; + IbexSPIHostState spi_host[OPENTITAN_NUM_SPI_HOSTS]; MemoryRegion flash_mem; MemoryRegion rom; @@ -XXX,XX +XXX,XX @@ enum { }; enum { - IBEX_TIMER_TIMEREXPIRED0_0 = 126, - IBEX_UART0_RX_PARITY_ERR_IRQ = 8, - IBEX_UART0_RX_TIMEOUT_IRQ = 7, - IBEX_UART0_RX_BREAK_ERR_IRQ = 6, - IBEX_UART0_RX_FRAME_ERR_IRQ = 5, - IBEX_UART0_RX_OVERFLOW_IRQ = 4, - IBEX_UART0_TX_EMPTY_IRQ = 3, - IBEX_UART0_RX_WATERMARK_IRQ = 2, - IBEX_UART0_TX_WATERMARK_IRQ = 1, + IBEX_UART0_TX_WATERMARK_IRQ = 1, + IBEX_UART0_RX_WATERMARK_IRQ = 2, + IBEX_UART0_TX_EMPTY_IRQ = 3, + IBEX_UART0_RX_OVERFLOW_IRQ = 4, + IBEX_UART0_RX_FRAME_ERR_IRQ = 5, + IBEX_UART0_RX_BREAK_ERR_IRQ = 6, + IBEX_UART0_RX_TIMEOUT_IRQ = 7, + IBEX_UART0_RX_PARITY_ERR_IRQ = 8, + IBEX_TIMER_TIMEREXPIRED0_0 = 126, + IBEX_SPI_HOST0_ERR_IRQ = 150, + IBEX_SPI_HOST0_SPI_EVENT_IRQ = 151, + IBEX_SPI_HOST1_ERR_IRQ = 152, + IBEX_SPI_HOST1_SPI_EVENT_IRQ = 153, }; #endif diff --git a/hw/riscv/opentitan.c b/hw/riscv/opentitan.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/opentitan.c +++ b/hw/riscv/opentitan.c @@ -XXX,XX +XXX,XX @@ static void lowrisc_ibex_soc_init(Object *obj) object_initialize_child(obj, "uart", &s->uart, TYPE_IBEX_UART); object_initialize_child(obj, "timer", &s->timer, TYPE_IBEX_TIMER); + + for (int i = 0; i < OPENTITAN_NUM_SPI_HOSTS; i++) { + object_initialize_child(obj, "spi_host[*]", &s->spi_host[i], + TYPE_IBEX_SPI_HOST); + } } static void lowrisc_ibex_soc_realize(DeviceState *dev_soc, Error **errp) { const MemMapEntry *memmap = ibex_memmap; + DeviceState *dev; + SysBusDevice *busdev; MachineState *ms = MACHINE(qdev_get_machine()); LowRISCIbexSoCState *s = RISCV_IBEX_SOC(dev_soc); MemoryRegion *sys_mem = get_system_memory(); @@ -XXX,XX +XXX,XX @@ static void lowrisc_ibex_soc_realize(DeviceState *dev_soc, Error **errp) qdev_get_gpio_in(DEVICE(qemu_get_cpu(0)), IRQ_M_TIMER)); + /* SPI-Hosts */ + for (int i = 0; i < OPENTITAN_NUM_SPI_HOSTS; ++i) { + dev = DEVICE(&(s->spi_host[i])); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->spi_host[i]), errp)) { + return; + } + busdev = SYS_BUS_DEVICE(dev); + sysbus_mmio_map(busdev, 0, memmap[IBEX_DEV_SPI_HOST0 + i].base); + + switch (i) { + case OPENTITAN_SPI_HOST0: + sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(DEVICE(&s->plic), + IBEX_SPI_HOST0_ERR_IRQ)); + sysbus_connect_irq(busdev, 1, qdev_get_gpio_in(DEVICE(&s->plic), + IBEX_SPI_HOST0_SPI_EVENT_IRQ)); + break; + case OPENTITAN_SPI_HOST1: + sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(DEVICE(&s->plic), + IBEX_SPI_HOST1_ERR_IRQ)); + sysbus_connect_irq(busdev, 1, qdev_get_gpio_in(DEVICE(&s->plic), + IBEX_SPI_HOST1_SPI_EVENT_IRQ)); + break; + } + } + create_unimplemented_device("riscv.lowrisc.ibex.gpio", memmap[IBEX_DEV_GPIO].base, memmap[IBEX_DEV_GPIO].size); create_unimplemented_device("riscv.lowrisc.ibex.spi_device", memmap[IBEX_DEV_SPI_DEVICE].base, memmap[IBEX_DEV_SPI_DEVICE].size); - create_unimplemented_device("riscv.lowrisc.ibex.spi_host0", - memmap[IBEX_DEV_SPI_HOST0].base, memmap[IBEX_DEV_SPI_HOST0].size); - create_unimplemented_device("riscv.lowrisc.ibex.spi_host1", - memmap[IBEX_DEV_SPI_HOST1].base, memmap[IBEX_DEV_SPI_HOST1].size); create_unimplemented_device("riscv.lowrisc.ibex.i2c", memmap[IBEX_DEV_I2C].base, memmap[IBEX_DEV_I2C].size); create_unimplemented_device("riscv.lowrisc.ibex.pattgen", -- 2.35.1 From: Atish Patra <atishp@rivosinc.com> Currently, the privileged specification version are defined in a complex manner for no benefit. Simplify it by changing it to a simple enum based on. Suggested-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Atish Patra <atishp@rivosinc.com> Message-Id: <20220303185440.512391-2-atishp@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ enum { RISCV_FEATURE_AIA }; -#define PRIV_VERSION_1_10_0 0x00011000 -#define PRIV_VERSION_1_11_0 0x00011100 +/* Privileged specification version */ +enum { + PRIV_VERSION_1_10_0 = 0, + PRIV_VERSION_1_11_0, +}; #define VEXT_VERSION_1_00_0 0x00010000 -- 2.35.1 From: Atish Patra <atishp@rivosinc.com> Add the definition for ratified privileged specification version v1.12 Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Atish Patra <atishp@rivosinc.com> Message-Id: <20220303185440.512391-3-atishp@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 1 + 1 file changed, 1 insertion(+) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ enum { enum { PRIV_VERSION_1_10_0 = 0, PRIV_VERSION_1_11_0, + PRIV_VERSION_1_12_0, }; #define VEXT_VERSION_1_00_0 0x00010000 -- 2.35.1 From: Atish Patra <atishp@rivosinc.com> To allow/disallow the CSR access based on the privilege spec, a new field in the csr_ops is introduced. It also adds the privileged specification version (v1.12) for the CSRs introduced in the v1.12. This includes the new ratified extensions such as Vector, Hypervisor and secconfig CSR. However, it doesn't enforce the privilege version in this commit. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Atish Patra <atishp@rivosinc.com> Message-Id: <20220303185440.512391-4-atishp@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 2 + target/riscv/csr.c | 103 ++++++++++++++++++++++++++++++--------------- 2 files changed, 70 insertions(+), 35 deletions(-) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct { riscv_csr_op_fn op; riscv_csr_read128_fn read128; riscv_csr_write128_fn write128; + /* The default priv spec version should be PRIV_VERSION_1_10_0 (i.e 0) */ + uint32_t min_priv_ver; } riscv_csr_operations; /* CSR function table constants */ diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ riscv_csr_operations csr_ops[CSR_TABLE_SIZE] = { [CSR_FRM] = { "frm", fs, read_frm, write_frm }, [CSR_FCSR] = { "fcsr", fs, read_fcsr, write_fcsr }, /* Vector CSRs */ - [CSR_VSTART] = { "vstart", vs, read_vstart, write_vstart }, - [CSR_VXSAT] = { "vxsat", vs, read_vxsat, write_vxsat }, - [CSR_VXRM] = { "vxrm", vs, read_vxrm, write_vxrm }, - [CSR_VCSR] = { "vcsr", vs, read_vcsr, write_vcsr }, - [CSR_VL] = { "vl", vs, read_vl }, - [CSR_VTYPE] = { "vtype", vs, read_vtype }, - [CSR_VLENB] = { "vlenb", vs, read_vlenb }, + [CSR_VSTART] = { "vstart", vs, read_vstart, write_vstart, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_VXSAT] = { "vxsat", vs, read_vxsat, write_vxsat, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_VXRM] = { "vxrm", vs, read_vxrm, write_vxrm, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_VCSR] = { "vcsr", vs, read_vcsr, write_vcsr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_VL] = { "vl", vs, read_vl, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_VTYPE] = { "vtype", vs, read_vtype, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_VLENB] = { "vlenb", vs, read_vlenb, + .min_priv_ver = PRIV_VERSION_1_12_0 }, /* User Timers and Counters */ [CSR_CYCLE] = { "cycle", ctr, read_instret }, [CSR_INSTRET] = { "instret", ctr, read_instret }, @@ -XXX,XX +XXX,XX @@ riscv_csr_operations csr_ops[CSR_TABLE_SIZE] = { [CSR_SIEH] = { "sieh", aia_smode32, NULL, NULL, rmw_sieh }, [CSR_SIPH] = { "siph", aia_smode32, NULL, NULL, rmw_siph }, - [CSR_HSTATUS] = { "hstatus", hmode, read_hstatus, write_hstatus }, - [CSR_HEDELEG] = { "hedeleg", hmode, read_hedeleg, write_hedeleg }, - [CSR_HIDELEG] = { "hideleg", hmode, NULL, NULL, rmw_hideleg }, - [CSR_HVIP] = { "hvip", hmode, NULL, NULL, rmw_hvip }, - [CSR_HIP] = { "hip", hmode, NULL, NULL, rmw_hip }, - [CSR_HIE] = { "hie", hmode, NULL, NULL, rmw_hie }, - [CSR_HCOUNTEREN] = { "hcounteren", hmode, read_hcounteren, write_hcounteren }, - [CSR_HGEIE] = { "hgeie", hmode, read_hgeie, write_hgeie }, - [CSR_HTVAL] = { "htval", hmode, read_htval, write_htval }, - [CSR_HTINST] = { "htinst", hmode, read_htinst, write_htinst }, - [CSR_HGEIP] = { "hgeip", hmode, read_hgeip, NULL }, - [CSR_HGATP] = { "hgatp", hmode, read_hgatp, write_hgatp }, - [CSR_HTIMEDELTA] = { "htimedelta", hmode, read_htimedelta, write_htimedelta }, - [CSR_HTIMEDELTAH] = { "htimedeltah", hmode32, read_htimedeltah, write_htimedeltah }, - - [CSR_VSSTATUS] = { "vsstatus", hmode, read_vsstatus, write_vsstatus }, - [CSR_VSIP] = { "vsip", hmode, NULL, NULL, rmw_vsip }, - [CSR_VSIE] = { "vsie", hmode, NULL, NULL, rmw_vsie }, - [CSR_VSTVEC] = { "vstvec", hmode, read_vstvec, write_vstvec }, - [CSR_VSSCRATCH] = { "vsscratch", hmode, read_vsscratch, write_vsscratch }, - [CSR_VSEPC] = { "vsepc", hmode, read_vsepc, write_vsepc }, - [CSR_VSCAUSE] = { "vscause", hmode, read_vscause, write_vscause }, - [CSR_VSTVAL] = { "vstval", hmode, read_vstval, write_vstval }, - [CSR_VSATP] = { "vsatp", hmode, read_vsatp, write_vsatp }, - - [CSR_MTVAL2] = { "mtval2", hmode, read_mtval2, write_mtval2 }, - [CSR_MTINST] = { "mtinst", hmode, read_mtinst, write_mtinst }, + [CSR_HSTATUS] = { "hstatus", hmode, read_hstatus, write_hstatus, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_HEDELEG] = { "hedeleg", hmode, read_hedeleg, write_hedeleg, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_HIDELEG] = { "hideleg", hmode, NULL, NULL, rmw_hideleg, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_HVIP] = { "hvip", hmode, NULL, NULL, rmw_hvip, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_HIP] = { "hip", hmode, NULL, NULL, rmw_hip, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_HIE] = { "hie", hmode, NULL, NULL, rmw_hie, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_HCOUNTEREN] = { "hcounteren", hmode, read_hcounteren, write_hcounteren, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_HGEIE] = { "hgeie", hmode, read_hgeie, write_hgeie, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_HTVAL] = { "htval", hmode, read_htval, write_htval, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_HTINST] = { "htinst", hmode, read_htinst, write_htinst, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_HGEIP] = { "hgeip", hmode, read_hgeip, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_HGATP] = { "hgatp", hmode, read_hgatp, write_hgatp, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_HTIMEDELTA] = { "htimedelta", hmode, read_htimedelta, write_htimedelta, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_HTIMEDELTAH] = { "htimedeltah", hmode32, read_htimedeltah, write_htimedeltah, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + + [CSR_VSSTATUS] = { "vsstatus", hmode, read_vsstatus, write_vsstatus, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_VSIP] = { "vsip", hmode, NULL, NULL, rmw_vsip, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_VSIE] = { "vsie", hmode, NULL, NULL, rmw_vsie , + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_VSTVEC] = { "vstvec", hmode, read_vstvec, write_vstvec, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_VSSCRATCH] = { "vsscratch", hmode, read_vsscratch, write_vsscratch, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_VSEPC] = { "vsepc", hmode, read_vsepc, write_vsepc, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_VSCAUSE] = { "vscause", hmode, read_vscause, write_vscause, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_VSTVAL] = { "vstval", hmode, read_vstval, write_vstval, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_VSATP] = { "vsatp", hmode, read_vsatp, write_vsatp, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + + [CSR_MTVAL2] = { "mtval2", hmode, read_mtval2, write_mtval2, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_MTINST] = { "mtinst", hmode, read_mtinst, write_mtinst, + .min_priv_ver = PRIV_VERSION_1_12_0 }, /* Virtual Interrupts and Interrupt Priorities (H-extension with AIA) */ [CSR_HVIEN] = { "hvien", aia_hmode, read_zero, write_ignore }, @@ -XXX,XX +XXX,XX @@ riscv_csr_operations csr_ops[CSR_TABLE_SIZE] = { [CSR_VSIPH] = { "vsiph", aia_hmode32, NULL, NULL, rmw_vsiph }, /* Physical Memory Protection */ - [CSR_MSECCFG] = { "mseccfg", epmp, read_mseccfg, write_mseccfg }, + [CSR_MSECCFG] = { "mseccfg", epmp, read_mseccfg, write_mseccfg, + .min_priv_ver = PRIV_VERSION_1_12_0 }, [CSR_PMPCFG0] = { "pmpcfg0", pmp, read_pmpcfg, write_pmpcfg }, [CSR_PMPCFG1] = { "pmpcfg1", pmp, read_pmpcfg, write_pmpcfg }, [CSR_PMPCFG2] = { "pmpcfg2", pmp, read_pmpcfg, write_pmpcfg }, -- 2.35.1 From: Atish Patra <atishp@rivosinc.com> RISC-V privileged specification v1.12 introduced a mconfigptr which will hold the physical address of a configuration data structure. As Qemu doesn't have a configuration data structure, is read as zero which is valid as per the priv spec. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Atish Patra <atishp@rivosinc.com> Message-Id: <20220303185440.512391-5-atishp@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu_bits.h | 1 + target/riscv/csr.c | 2 ++ 2 files changed, 3 insertions(+) diff --git a/target/riscv/cpu_bits.h b/target/riscv/cpu_bits.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_bits.h +++ b/target/riscv/cpu_bits.h @@ -XXX,XX +XXX,XX @@ #define CSR_MARCHID 0xf12 #define CSR_MIMPID 0xf13 #define CSR_MHARTID 0xf14 +#define CSR_MCONFIGPTR 0xf15 /* Machine Trap Setup */ #define CSR_MSTATUS 0x300 diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ riscv_csr_operations csr_ops[CSR_TABLE_SIZE] = { [CSR_MIMPID] = { "mimpid", any, read_zero }, [CSR_MHARTID] = { "mhartid", any, read_mhartid }, + [CSR_MCONFIGPTR] = { "mconfigptr", any, read_zero, + .min_priv_ver = PRIV_VERSION_1_12_0 }, /* Machine Trap Setup */ [CSR_MSTATUS] = { "mstatus", any, read_mstatus, write_mstatus, NULL, read_mstatus_i128 }, -- 2.35.1 From: Atish Patra <atishp@rivosinc.com> The RISC-V privileged specification v1.12 defines few execution environment configuration CSRs that can be used enable/disable extensions per privilege levels. Add the basic support for these CSRs. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Atish Patra <atishp@rivosinc.com> Message-Id: <20220303185440.512391-6-atishp@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 5 ++ target/riscv/cpu_bits.h | 39 +++++++++++++++ target/riscv/csr.c | 107 ++++++++++++++++++++++++++++++++++++++++ target/riscv/machine.c | 23 +++++++++ 4 files changed, 174 insertions(+) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ struct CPUArchState { target_ulong spmbase; target_ulong upmmask; target_ulong upmbase; + + /* CSRs for execution enviornment configuration */ + uint64_t menvcfg; + target_ulong senvcfg; + uint64_t henvcfg; #endif target_ulong cur_pmmask; target_ulong cur_pmbase; diff --git a/target/riscv/cpu_bits.h b/target/riscv/cpu_bits.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_bits.h +++ b/target/riscv/cpu_bits.h @@ -XXX,XX +XXX,XX @@ #define CSR_STVEC 0x105 #define CSR_SCOUNTEREN 0x106 +/* Supervisor Configuration CSRs */ +#define CSR_SENVCFG 0x10A + /* Supervisor Trap Handling */ #define CSR_SSCRATCH 0x140 #define CSR_SEPC 0x141 @@ -XXX,XX +XXX,XX @@ #define CSR_HTIMEDELTA 0x605 #define CSR_HTIMEDELTAH 0x615 +/* Hypervisor Configuration CSRs */ +#define CSR_HENVCFG 0x60A +#define CSR_HENVCFGH 0x61A + /* Virtual CSRs */ #define CSR_VSSTATUS 0x200 #define CSR_VSIE 0x204 @@ -XXX,XX +XXX,XX @@ #define CSR_VSIEH 0x214 #define CSR_VSIPH 0x254 +/* Machine Configuration CSRs */ +#define CSR_MENVCFG 0x30A +#define CSR_MENVCFGH 0x31A + /* Enhanced Physical Memory Protection (ePMP) */ #define CSR_MSECCFG 0x747 #define CSR_MSECCFGH 0x757 @@ -XXX,XX +XXX,XX @@ typedef enum RISCVException { #define PM_EXT_CLEAN 0x00000002ULL #define PM_EXT_DIRTY 0x00000003ULL +/* Execution enviornment configuration bits */ +#define MENVCFG_FIOM BIT(0) +#define MENVCFG_CBIE (3UL << 4) +#define MENVCFG_CBCFE BIT(6) +#define MENVCFG_CBZE BIT(7) +#define MENVCFG_PBMTE (1ULL << 62) +#define MENVCFG_STCE (1ULL << 63) + +/* For RV32 */ +#define MENVCFGH_PBMTE BIT(30) +#define MENVCFGH_STCE BIT(31) + +#define SENVCFG_FIOM MENVCFG_FIOM +#define SENVCFG_CBIE MENVCFG_CBIE +#define SENVCFG_CBCFE MENVCFG_CBCFE +#define SENVCFG_CBZE MENVCFG_CBZE + +#define HENVCFG_FIOM MENVCFG_FIOM +#define HENVCFG_CBIE MENVCFG_CBIE +#define HENVCFG_CBCFE MENVCFG_CBCFE +#define HENVCFG_CBZE MENVCFG_CBZE +#define HENVCFG_PBMTE MENVCFG_PBMTE +#define HENVCFG_STCE MENVCFG_STCE + +/* For RV32 */ +#define HENVCFGH_PBMTE MENVCFGH_PBMTE +#define HENVCFGH_STCE MENVCFGH_STCE + /* Offsets for every pair of control bits per each priv level */ #define XS_OFFSET 0ULL #define U_OFFSET 2ULL diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException write_mtval(CPURISCVState *env, int csrno, return RISCV_EXCP_NONE; } +/* Execution environment configuration setup */ +static RISCVException read_menvcfg(CPURISCVState *env, int csrno, + target_ulong *val) +{ + *val = env->menvcfg; + return RISCV_EXCP_NONE; +} + +static RISCVException write_menvcfg(CPURISCVState *env, int csrno, + target_ulong val) +{ + uint64_t mask = MENVCFG_FIOM | MENVCFG_CBIE | MENVCFG_CBCFE | MENVCFG_CBZE; + + if (riscv_cpu_mxl(env) == MXL_RV64) { + mask |= MENVCFG_PBMTE | MENVCFG_STCE; + } + env->menvcfg = (env->menvcfg & ~mask) | (val & mask); + + return RISCV_EXCP_NONE; +} + +static RISCVException read_menvcfgh(CPURISCVState *env, int csrno, + target_ulong *val) +{ + *val = env->menvcfg >> 32; + return RISCV_EXCP_NONE; +} + +static RISCVException write_menvcfgh(CPURISCVState *env, int csrno, + target_ulong val) +{ + uint64_t mask = MENVCFG_PBMTE | MENVCFG_STCE; + uint64_t valh = (uint64_t)val << 32; + + env->menvcfg = (env->menvcfg & ~mask) | (valh & mask); + + return RISCV_EXCP_NONE; +} + +static RISCVException read_senvcfg(CPURISCVState *env, int csrno, + target_ulong *val) +{ + *val = env->senvcfg; + return RISCV_EXCP_NONE; +} + +static RISCVException write_senvcfg(CPURISCVState *env, int csrno, + target_ulong val) +{ + uint64_t mask = SENVCFG_FIOM | SENVCFG_CBIE | SENVCFG_CBCFE | SENVCFG_CBZE; + + env->senvcfg = (env->senvcfg & ~mask) | (val & mask); + + return RISCV_EXCP_NONE; +} + +static RISCVException read_henvcfg(CPURISCVState *env, int csrno, + target_ulong *val) +{ + *val = env->henvcfg; + return RISCV_EXCP_NONE; +} + +static RISCVException write_henvcfg(CPURISCVState *env, int csrno, + target_ulong val) +{ + uint64_t mask = HENVCFG_FIOM | HENVCFG_CBIE | HENVCFG_CBCFE | HENVCFG_CBZE; + + if (riscv_cpu_mxl(env) == MXL_RV64) { + mask |= HENVCFG_PBMTE | HENVCFG_STCE; + } + + env->henvcfg = (env->henvcfg & ~mask) | (val & mask); + + return RISCV_EXCP_NONE; +} + +static RISCVException read_henvcfgh(CPURISCVState *env, int csrno, + target_ulong *val) +{ + *val = env->henvcfg >> 32; + return RISCV_EXCP_NONE; +} + +static RISCVException write_henvcfgh(CPURISCVState *env, int csrno, + target_ulong val) +{ + uint64_t mask = HENVCFG_PBMTE | HENVCFG_STCE; + uint64_t valh = (uint64_t)val << 32; + + env->henvcfg = (env->henvcfg & ~mask) | (valh & mask); + + return RISCV_EXCP_NONE; +} + static RISCVException rmw_mip64(CPURISCVState *env, int csrno, uint64_t *ret_val, uint64_t new_val, uint64_t wr_mask) @@ -XXX,XX +XXX,XX @@ riscv_csr_operations csr_ops[CSR_TABLE_SIZE] = { [CSR_MVIPH] = { "mviph", aia_any32, read_zero, write_ignore }, [CSR_MIPH] = { "miph", aia_any32, NULL, NULL, rmw_miph }, + /* Execution environment configuration */ + [CSR_MENVCFG] = { "menvcfg", any, read_menvcfg, write_menvcfg, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_MENVCFGH] = { "menvcfgh", any32, read_menvcfgh, write_menvcfgh, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_SENVCFG] = { "senvcfg", smode, read_senvcfg, write_senvcfg, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_HENVCFG] = { "henvcfg", hmode, read_henvcfg, write_henvcfg, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_HENVCFGH] = { "henvcfgh", hmode32, read_henvcfgh, write_henvcfgh, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + /* Supervisor Trap Setup */ [CSR_SSTATUS] = { "sstatus", smode, read_sstatus, write_sstatus, NULL, read_sstatus_i128 }, diff --git a/target/riscv/machine.c b/target/riscv/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/machine.c +++ b/target/riscv/machine.c @@ -XXX,XX +XXX,XX @@ static int riscv_cpu_post_load(void *opaque, int version_id) return 0; } +static bool envcfg_needed(void *opaque) +{ + RISCVCPU *cpu = opaque; + CPURISCVState *env = &cpu->env; + + return (env->priv_ver >= PRIV_VERSION_1_12_0 ? 1 : 0); +} + +static const VMStateDescription vmstate_envcfg = { + .name = "cpu/envcfg", + .version_id = 1, + .minimum_version_id = 1, + .needed = envcfg_needed, + .fields = (VMStateField[]) { + VMSTATE_UINT64(env.menvcfg, RISCVCPU), + VMSTATE_UINTTL(env.senvcfg, RISCVCPU), + VMSTATE_UINT64(env.henvcfg, RISCVCPU), + + VMSTATE_END_OF_LIST() + } +}; + const VMStateDescription vmstate_riscv_cpu = { .name = "cpu", .version_id = 3, @@ -XXX,XX +XXX,XX @@ const VMStateDescription vmstate_riscv_cpu = { &vmstate_pointermasking, &vmstate_rv128, &vmstate_kvmtimer, + &vmstate_envcfg, NULL } }; -- 2.35.1 From: Atish Patra <atishp@rivosinc.com> Virt machine uses privileged specification version 1.12 now. All other machine continue to use the default one defined for that machine unless changed to 1.12 by the user explicitly. This commit enforces the privilege version for csrs introduced in v1.12 or after. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Atish Patra <atishp@rivosinc.com> Message-Id: <20220303185440.512391-7-atishp@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 8 +++++--- target/riscv/csr.c | 5 +++++ 2 files changed, 10 insertions(+), 3 deletions(-) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_any_cpu_init(Object *obj) #elif defined(TARGET_RISCV64) set_misa(env, MXL_RV64, RVI | RVM | RVA | RVF | RVD | RVC | RVU); #endif - set_priv_version(env, PRIV_VERSION_1_11_0); + set_priv_version(env, PRIV_VERSION_1_12_0); } #if defined(TARGET_RISCV64) @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_realize(DeviceState *dev, Error **errp) } if (cpu->cfg.priv_spec) { - if (!g_strcmp0(cpu->cfg.priv_spec, "v1.11.0")) { + if (!g_strcmp0(cpu->cfg.priv_spec, "v1.12.0")) { + priv_version = PRIV_VERSION_1_12_0; + } else if (!g_strcmp0(cpu->cfg.priv_spec, "v1.11.0")) { priv_version = PRIV_VERSION_1_11_0; } else if (!g_strcmp0(cpu->cfg.priv_spec, "v1.10.0")) { priv_version = PRIV_VERSION_1_10_0; @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_realize(DeviceState *dev, Error **errp) if (priv_version) { set_priv_version(env, priv_version); } else if (!env->priv_ver) { - set_priv_version(env, PRIV_VERSION_1_11_0); + set_priv_version(env, PRIV_VERSION_1_12_0); } if (cpu->cfg.mmu) { diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static inline RISCVException riscv_csrrw_check(CPURISCVState *env, { /* check privileges and return RISCV_EXCP_ILLEGAL_INST if check fails */ int read_only = get_field(csrno, 0xC00) == 3; + int csr_min_priv = csr_ops[csrno].min_priv_ver; #if !defined(CONFIG_USER_ONLY) int effective_priv = env->priv; @@ -XXX,XX +XXX,XX @@ static inline RISCVException riscv_csrrw_check(CPURISCVState *env, return RISCV_EXCP_ILLEGAL_INST; } + if (env->priv_ver < csr_min_priv) { + return RISCV_EXCP_ILLEGAL_INST; + } + return csr_ops[csrno].predicate(env, csrno); } -- 2.35.1 From: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220317061817.3856850-2-alistair.francis@opensource.wdc.com> --- target/riscv/cpu.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_realize(DeviceState *dev, Error **errp) if (cpu->cfg.ext_i && cpu->cfg.ext_e) { error_setg(errp, "I and E extensions are incompatible"); - return; - } + return; + } if (!cpu->cfg.ext_i && !cpu->cfg.ext_e) { error_setg(errp, "Either I or E extension must be set"); - return; - } + return; + } - if (cpu->cfg.ext_g && !(cpu->cfg.ext_i & cpu->cfg.ext_m & - cpu->cfg.ext_a & cpu->cfg.ext_f & - cpu->cfg.ext_d)) { + if (cpu->cfg.ext_g && !(cpu->cfg.ext_i & cpu->cfg.ext_m & + cpu->cfg.ext_a & cpu->cfg.ext_f & + cpu->cfg.ext_d)) { warn_report("Setting G will also set IMAFD"); cpu->cfg.ext_i = true; cpu->cfg.ext_m = true; @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_set_irq(void *opaque, int irq, int level) case IRQ_S_EXT: case IRQ_VS_EXT: case IRQ_M_EXT: - if (kvm_enabled()) { + if (kvm_enabled()) { kvm_riscv_set_irq(cpu, irq, level); - } else { + } else { riscv_cpu_update_mip(cpu, 1 << irq, BOOL_TO_MASK(level)); - } + } break; default: g_assert_not_reached(); -- 2.35.1 From: Alistair Francis <alistair.francis@wdc.com> The RISC-V specification states that: "Supervisor-level external interrupts are made pending based on the logical-OR of the software-writable SEIP bit and the signal from the external interrupt controller." We currently only allow either the interrupt controller or software to set the bit, which is incorrect. This patch removes the miclaim mask when writing MIP to allow M-mode software to inject interrupts, even with an interrupt controller. We then also need to keep track of which source is setting MIP_SEIP. The final value is a OR of both, so we add two bools and use that to keep track of the current state. This way either source can change without losing the correct value. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/904 Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220317061817.3856850-3-alistair.francis@opensource.wdc.com> --- target/riscv/cpu.h | 8 ++++++++ target/riscv/cpu.c | 10 +++++++++- target/riscv/csr.c | 8 ++++++-- 3 files changed, 23 insertions(+), 3 deletions(-) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ struct CPUArchState { uint64_t mstatus; uint64_t mip; + /* + * MIP contains the software writable version of SEIP ORed with the + * external interrupt value. The MIP register is always up-to-date. + * To keep track of the current source, we also save booleans of the values + * here. + */ + bool external_seip; + bool software_seip; uint64_t miclaim; diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_set_irq(void *opaque, int irq, int level) case IRQ_VS_TIMER: case IRQ_M_TIMER: case IRQ_U_EXT: - case IRQ_S_EXT: case IRQ_VS_EXT: case IRQ_M_EXT: if (kvm_enabled()) { @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_set_irq(void *opaque, int irq, int level) riscv_cpu_update_mip(cpu, 1 << irq, BOOL_TO_MASK(level)); } break; + case IRQ_S_EXT: + if (kvm_enabled()) { + kvm_riscv_set_irq(cpu, irq, level); + } else { + env->external_seip = level; + riscv_cpu_update_mip(cpu, 1 << irq, + BOOL_TO_MASK(level | env->software_seip)); + } + break; default: g_assert_not_reached(); } diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException rmw_mip64(CPURISCVState *env, int csrno, uint64_t new_val, uint64_t wr_mask) { RISCVCPU *cpu = env_archcpu(env); - /* Allow software control of delegable interrupts not claimed by hardware */ - uint64_t old_mip, mask = wr_mask & delegable_ints & ~env->miclaim; + uint64_t old_mip, mask = wr_mask & delegable_ints; uint32_t gin; + if (mask & MIP_SEIP) { + env->software_seip = new_val & MIP_SEIP; + new_val |= env->external_seip * MIP_SEIP; + } + if (mask) { old_mip = riscv_cpu_update_mip(cpu, mask, (new_val & mask)); } else { -- 2.35.1 From: Bin Meng <bin.meng@windriver.com> This adds initial support for the Sdtrig extension via the Trigger Module, as defined in the RISC-V Debug Specification [1]. Only "Address / Data Match" trigger (type 2) is implemented as of now, which is mainly used for hardware breakpoint and watchpoint. The number of type 2 triggers implemented is 2, which is the number that we can find in the SiFive U54/U74 cores. [1] https://github.com/riscv/riscv-debug-spec/raw/master/riscv-debug-stable.pdf Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20220315065529.62198-2-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 5 + target/riscv/debug.h | 108 +++++++++++++ target/riscv/debug.c | 339 +++++++++++++++++++++++++++++++++++++++ target/riscv/meson.build | 1 + 4 files changed, 453 insertions(+) create mode 100644 target/riscv/debug.h create mode 100644 target/riscv/debug.c diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState CPURISCVState; #if !defined(CONFIG_USER_ONLY) #include "pmp.h" +#include "debug.h" #endif #define RV_VLEN_MAX 1024 @@ -XXX,XX +XXX,XX @@ struct CPUArchState { pmp_table_t pmp_state; target_ulong mseccfg; + /* trigger module */ + target_ulong trigger_cur; + type2_trigger_t type2_trig[TRIGGER_TYPE2_NUM]; + /* machine specific rdtime callback */ uint64_t (*rdtime_fn)(uint32_t); uint32_t rdtime_fn_arg; diff --git a/target/riscv/debug.h b/target/riscv/debug.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/target/riscv/debug.h @@ -XXX,XX +XXX,XX @@ +/* + * QEMU RISC-V Native Debug Support + * + * Copyright (c) 2022 Wind River Systems, Inc. + * + * Author: + * Bin Meng <bin.meng@windriver.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2 or later, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef RISCV_DEBUG_H +#define RISCV_DEBUG_H + +/* trigger indexes implemented */ +enum { + TRIGGER_TYPE2_IDX_0 = 0, + TRIGGER_TYPE2_IDX_1, + TRIGGER_TYPE2_NUM, + TRIGGER_NUM = TRIGGER_TYPE2_NUM +}; + +/* register index of tdata CSRs */ +enum { + TDATA1 = 0, + TDATA2, + TDATA3, + TDATA_NUM +}; + +typedef enum { + TRIGGER_TYPE_NO_EXIST = 0, /* trigger does not exist */ + TRIGGER_TYPE_AD_MATCH = 2, /* address/data match trigger */ + TRIGGER_TYPE_INST_CNT = 3, /* instruction count trigger */ + TRIGGER_TYPE_INT = 4, /* interrupt trigger */ + TRIGGER_TYPE_EXCP = 5, /* exception trigger */ + TRIGGER_TYPE_AD_MATCH6 = 6, /* new address/data match trigger */ + TRIGGER_TYPE_EXT_SRC = 7, /* external source trigger */ + TRIGGER_TYPE_UNAVAIL = 15 /* trigger exists, but unavailable */ +} trigger_type_t; + +typedef struct { + target_ulong mcontrol; + target_ulong maddress; + struct CPUBreakpoint *bp; + struct CPUWatchpoint *wp; +} type2_trigger_t; + +/* tdata field masks */ + +#define RV32_TYPE(t) ((uint32_t)(t) << 28) +#define RV32_TYPE_MASK (0xf << 28) +#define RV32_DMODE BIT(27) +#define RV64_TYPE(t) ((uint64_t)(t) << 60) +#define RV64_TYPE_MASK (0xfULL << 60) +#define RV64_DMODE BIT_ULL(59) + +/* mcontrol field masks */ + +#define TYPE2_LOAD BIT(0) +#define TYPE2_STORE BIT(1) +#define TYPE2_EXEC BIT(2) +#define TYPE2_U BIT(3) +#define TYPE2_S BIT(4) +#define TYPE2_M BIT(6) +#define TYPE2_MATCH (0xf << 7) +#define TYPE2_CHAIN BIT(11) +#define TYPE2_ACTION (0xf << 12) +#define TYPE2_SIZELO (0x3 << 16) +#define TYPE2_TIMING BIT(18) +#define TYPE2_SELECT BIT(19) +#define TYPE2_HIT BIT(20) +#define TYPE2_SIZEHI (0x3 << 21) /* RV64 only */ + +/* access size */ +enum { + SIZE_ANY = 0, + SIZE_1B, + SIZE_2B, + SIZE_4B, + SIZE_6B, + SIZE_8B, + SIZE_10B, + SIZE_12B, + SIZE_14B, + SIZE_16B, + SIZE_NUM = 16 +}; + +bool tdata_available(CPURISCVState *env, int tdata_index); + +target_ulong tselect_csr_read(CPURISCVState *env); +void tselect_csr_write(CPURISCVState *env, target_ulong val); + +target_ulong tdata_csr_read(CPURISCVState *env, int tdata_index); +void tdata_csr_write(CPURISCVState *env, int tdata_index, target_ulong val); + +#endif /* RISCV_DEBUG_H */ diff --git a/target/riscv/debug.c b/target/riscv/debug.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/target/riscv/debug.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU RISC-V Native Debug Support + * + * Copyright (c) 2022 Wind River Systems, Inc. + * + * Author: + * Bin Meng <bin.meng@windriver.com> + * + * This provides the native debug support via the Trigger Module, as defined + * in the RISC-V Debug Specification: + * https://github.com/riscv/riscv-debug-spec/raw/master/riscv-debug-stable.pdf + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2 or later, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qapi/error.h" +#include "cpu.h" +#include "trace.h" +#include "exec/exec-all.h" + +/* + * The following M-mode trigger CSRs are implemented: + * + * - tselect + * - tdata1 + * - tdata2 + * - tdata3 + * + * We don't support writable 'type' field in the tdata1 register, so there is + * no need to implement the "tinfo" CSR. + * + * The following triggers are implemented: + * + * Index | Type | tdata mapping | Description + * ------+------+------------------------+------------ + * 0 | 2 | tdata1, tdata2 | Address / Data Match + * 1 | 2 | tdata1, tdata2 | Address / Data Match + */ + +/* tdata availability of a trigger */ +typedef bool tdata_avail[TDATA_NUM]; + +static tdata_avail tdata_mapping[TRIGGER_NUM] = { + [TRIGGER_TYPE2_IDX_0 ... TRIGGER_TYPE2_IDX_1] = { true, true, false }, +}; + +/* only breakpoint size 1/2/4/8 supported */ +static int access_size[SIZE_NUM] = { + [SIZE_ANY] = 0, + [SIZE_1B] = 1, + [SIZE_2B] = 2, + [SIZE_4B] = 4, + [SIZE_6B] = -1, + [SIZE_8B] = 8, + [6 ... 15] = -1, +}; + +static inline target_ulong trigger_type(CPURISCVState *env, + trigger_type_t type) +{ + target_ulong tdata1; + + switch (riscv_cpu_mxl(env)) { + case MXL_RV32: + tdata1 = RV32_TYPE(type); + break; + case MXL_RV64: + tdata1 = RV64_TYPE(type); + break; + default: + g_assert_not_reached(); + } + + return tdata1; +} + +bool tdata_available(CPURISCVState *env, int tdata_index) +{ + if (unlikely(tdata_index >= TDATA_NUM)) { + return false; + } + + if (unlikely(env->trigger_cur >= TRIGGER_NUM)) { + return false; + } + + return tdata_mapping[env->trigger_cur][tdata_index]; +} + +target_ulong tselect_csr_read(CPURISCVState *env) +{ + return env->trigger_cur; +} + +void tselect_csr_write(CPURISCVState *env, target_ulong val) +{ + /* all target_ulong bits of tselect are implemented */ + env->trigger_cur = val; +} + +static target_ulong tdata1_validate(CPURISCVState *env, target_ulong val, + trigger_type_t t) +{ + uint32_t type, dmode; + target_ulong tdata1; + + switch (riscv_cpu_mxl(env)) { + case MXL_RV32: + type = extract32(val, 28, 4); + dmode = extract32(val, 27, 1); + tdata1 = RV32_TYPE(t); + break; + case MXL_RV64: + type = extract64(val, 60, 4); + dmode = extract64(val, 59, 1); + tdata1 = RV64_TYPE(t); + break; + default: + g_assert_not_reached(); + } + + if (type != t) { + qemu_log_mask(LOG_GUEST_ERROR, + "ignoring type write to tdata1 register\n"); + } + if (dmode != 0) { + qemu_log_mask(LOG_UNIMP, "debug mode is not supported\n"); + } + + return tdata1; +} + +static inline void warn_always_zero_bit(target_ulong val, target_ulong mask, + const char *msg) +{ + if (val & mask) { + qemu_log_mask(LOG_UNIMP, "%s bit is always zero\n", msg); + } +} + +static uint32_t type2_breakpoint_size(CPURISCVState *env, target_ulong ctrl) +{ + uint32_t size, sizelo, sizehi = 0; + + if (riscv_cpu_mxl(env) == MXL_RV64) { + sizehi = extract32(ctrl, 21, 2); + } + sizelo = extract32(ctrl, 16, 2); + size = (sizehi << 2) | sizelo; + + return size; +} + +static inline bool type2_breakpoint_enabled(target_ulong ctrl) +{ + bool mode = !!(ctrl & (TYPE2_U | TYPE2_S | TYPE2_M)); + bool rwx = !!(ctrl & (TYPE2_LOAD | TYPE2_STORE | TYPE2_EXEC)); + + return mode && rwx; +} + +static target_ulong type2_mcontrol_validate(CPURISCVState *env, + target_ulong ctrl) +{ + target_ulong val; + uint32_t size; + + /* validate the generic part first */ + val = tdata1_validate(env, ctrl, TRIGGER_TYPE_AD_MATCH); + + /* validate unimplemented (always zero) bits */ + warn_always_zero_bit(ctrl, TYPE2_MATCH, "match"); + warn_always_zero_bit(ctrl, TYPE2_CHAIN, "chain"); + warn_always_zero_bit(ctrl, TYPE2_ACTION, "action"); + warn_always_zero_bit(ctrl, TYPE2_TIMING, "timing"); + warn_always_zero_bit(ctrl, TYPE2_SELECT, "select"); + warn_always_zero_bit(ctrl, TYPE2_HIT, "hit"); + + /* validate size encoding */ + size = type2_breakpoint_size(env, ctrl); + if (access_size[size] == -1) { + qemu_log_mask(LOG_UNIMP, "access size %d is not supported, using SIZE_ANY\n", + size); + } else { + val |= (ctrl & TYPE2_SIZELO); + if (riscv_cpu_mxl(env) == MXL_RV64) { + val |= (ctrl & TYPE2_SIZEHI); + } + } + + /* keep the mode and attribute bits */ + val |= (ctrl & (TYPE2_U | TYPE2_S | TYPE2_M | + TYPE2_LOAD | TYPE2_STORE | TYPE2_EXEC)); + + return val; +} + +static void type2_breakpoint_insert(CPURISCVState *env, target_ulong index) +{ + target_ulong ctrl = env->type2_trig[index].mcontrol; + target_ulong addr = env->type2_trig[index].maddress; + bool enabled = type2_breakpoint_enabled(ctrl); + CPUState *cs = env_cpu(env); + int flags = BP_CPU | BP_STOP_BEFORE_ACCESS; + uint32_t size; + + if (!enabled) { + return; + } + + if (ctrl & TYPE2_EXEC) { + cpu_breakpoint_insert(cs, addr, flags, &env->type2_trig[index].bp); + } + + if (ctrl & TYPE2_LOAD) { + flags |= BP_MEM_READ; + } + if (ctrl & TYPE2_STORE) { + flags |= BP_MEM_WRITE; + } + + if (flags & BP_MEM_ACCESS) { + size = type2_breakpoint_size(env, ctrl); + if (size != 0) { + cpu_watchpoint_insert(cs, addr, size, flags, + &env->type2_trig[index].wp); + } else { + cpu_watchpoint_insert(cs, addr, 8, flags, + &env->type2_trig[index].wp); + } + } +} + +static void type2_breakpoint_remove(CPURISCVState *env, target_ulong index) +{ + CPUState *cs = env_cpu(env); + + if (env->type2_trig[index].bp) { + cpu_breakpoint_remove_by_ref(cs, env->type2_trig[index].bp); + env->type2_trig[index].bp = NULL; + } + + if (env->type2_trig[index].wp) { + cpu_watchpoint_remove_by_ref(cs, env->type2_trig[index].wp); + env->type2_trig[index].wp = NULL; + } +} + +static target_ulong type2_reg_read(CPURISCVState *env, + target_ulong trigger_index, int tdata_index) +{ + uint32_t index = trigger_index - TRIGGER_TYPE2_IDX_0; + target_ulong tdata; + + switch (tdata_index) { + case TDATA1: + tdata = env->type2_trig[index].mcontrol; + break; + case TDATA2: + tdata = env->type2_trig[index].maddress; + break; + default: + g_assert_not_reached(); + } + + return tdata; +} + +static void type2_reg_write(CPURISCVState *env, target_ulong trigger_index, + int tdata_index, target_ulong val) +{ + uint32_t index = trigger_index - TRIGGER_TYPE2_IDX_0; + target_ulong new_val; + + switch (tdata_index) { + case TDATA1: + new_val = type2_mcontrol_validate(env, val); + if (new_val != env->type2_trig[index].mcontrol) { + env->type2_trig[index].mcontrol = new_val; + type2_breakpoint_remove(env, index); + type2_breakpoint_insert(env, index); + } + break; + case TDATA2: + if (val != env->type2_trig[index].maddress) { + env->type2_trig[index].maddress = val; + type2_breakpoint_remove(env, index); + type2_breakpoint_insert(env, index); + } + break; + default: + g_assert_not_reached(); + } + + return; +} + +typedef target_ulong (*tdata_read_func)(CPURISCVState *env, + target_ulong trigger_index, + int tdata_index); + +static tdata_read_func trigger_read_funcs[TRIGGER_NUM] = { + [TRIGGER_TYPE2_IDX_0 ... TRIGGER_TYPE2_IDX_1] = type2_reg_read, +}; + +typedef void (*tdata_write_func)(CPURISCVState *env, + target_ulong trigger_index, + int tdata_index, + target_ulong val); + +static tdata_write_func trigger_write_funcs[TRIGGER_NUM] = { + [TRIGGER_TYPE2_IDX_0 ... TRIGGER_TYPE2_IDX_1] = type2_reg_write, +}; + +target_ulong tdata_csr_read(CPURISCVState *env, int tdata_index) +{ + tdata_read_func read_func = trigger_read_funcs[env->trigger_cur]; + + return read_func(env, env->trigger_cur, tdata_index); +} + +void tdata_csr_write(CPURISCVState *env, int tdata_index, target_ulong val) +{ + tdata_write_func write_func = trigger_write_funcs[env->trigger_cur]; + + return write_func(env, env->trigger_cur, tdata_index, val); +} diff --git a/target/riscv/meson.build b/target/riscv/meson.build index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/meson.build +++ b/target/riscv/meson.build @@ -XXX,XX +XXX,XX @@ riscv_softmmu_ss = ss.source_set() riscv_softmmu_ss.add(files( 'arch_dump.c', 'pmp.c', + 'debug.c', 'monitor.c', 'machine.c' )) -- 2.35.1 From: Weiwei Li <liweiwei@iscas.ac.cn> for some cases, scale is always equal or less than 0, since lmul is not larger than 3 Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Frank Chang <frank.chang@sifive.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20220325085902.29500-1-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/insn_trans/trans_rvv.c.inc | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/target/riscv/insn_trans/trans_rvv.c.inc b/target/riscv/insn_trans/trans_rvv.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_rvv.c.inc +++ b/target/riscv/insn_trans/trans_rvv.c.inc @@ -XXX,XX +XXX,XX @@ GEN_LDST_WHOLE_TRANS(vs8r_v, 8, true) static inline uint32_t MAXSZ(DisasContext *s) { int scale = s->lmul - 3; - return scale < 0 ? s->cfg_ptr->vlen >> -scale : s->cfg_ptr->vlen << scale; + return s->cfg_ptr->vlen >> -scale; } static bool opivv_check(DisasContext *s, arg_rmrr *a) @@ -XXX,XX +XXX,XX @@ static bool trans_vrgather_vx(DisasContext *s, arg_rmrr *a) if (a->vm && s->vl_eq_vlmax) { int scale = s->lmul - (s->sew + 3); - int vlmax = scale < 0 ? - s->cfg_ptr->vlen >> -scale : s->cfg_ptr->vlen << scale; + int vlmax = s->cfg_ptr->vlen >> -scale; TCGv_i64 dest = tcg_temp_new_i64(); if (a->rs1 == 0) { @@ -XXX,XX +XXX,XX @@ static bool trans_vrgather_vi(DisasContext *s, arg_rmrr *a) if (a->vm && s->vl_eq_vlmax) { int scale = s->lmul - (s->sew + 3); - int vlmax = scale < 0 ? - s->cfg_ptr->vlen >> -scale : s->cfg_ptr->vlen << scale; + int vlmax = s->cfg_ptr->vlen >> -scale; if (a->rs1 >= vlmax) { tcg_gen_gvec_dup_imm(MO_64, vreg_ofs(s, a->rd), MAXSZ(s), MAXSZ(s), 0); -- 2.35.1 From: Weiwei Li <liweiwei@iscas.ac.cn> LEN is not used for GEN_VEXT_VMV_WHOLE macro, so vmv<nr>r.v can share the same helper Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20220325085902.29500-2-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/helper.h | 5 +---- target/riscv/vector_helper.c | 29 ++++++++++--------------- target/riscv/insn_trans/trans_rvv.c.inc | 17 +++++---------- 3 files changed, 18 insertions(+), 33 deletions(-) diff --git a/target/riscv/helper.h b/target/riscv/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/helper.h +++ b/target/riscv/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_6(vcompress_vm_h, void, ptr, ptr, ptr, ptr, env, i32) DEF_HELPER_6(vcompress_vm_w, void, ptr, ptr, ptr, ptr, env, i32) DEF_HELPER_6(vcompress_vm_d, void, ptr, ptr, ptr, ptr, env, i32) -DEF_HELPER_4(vmv1r_v, void, ptr, ptr, env, i32) -DEF_HELPER_4(vmv2r_v, void, ptr, ptr, env, i32) -DEF_HELPER_4(vmv4r_v, void, ptr, ptr, env, i32) -DEF_HELPER_4(vmv8r_v, void, ptr, ptr, env, i32) +DEF_HELPER_4(vmvr_v, void, ptr, ptr, env, i32) DEF_HELPER_5(vzext_vf2_h, void, ptr, ptr, ptr, env, i32) DEF_HELPER_5(vzext_vf2_w, void, ptr, ptr, ptr, env, i32) diff --git a/target/riscv/vector_helper.c b/target/riscv/vector_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/vector_helper.c +++ b/target/riscv/vector_helper.c @@ -XXX,XX +XXX,XX @@ GEN_VEXT_VCOMPRESS_VM(vcompress_vm_w, uint32_t, H4) GEN_VEXT_VCOMPRESS_VM(vcompress_vm_d, uint64_t, H8) /* Vector Whole Register Move */ -#define GEN_VEXT_VMV_WHOLE(NAME, LEN) \ -void HELPER(NAME)(void *vd, void *vs2, CPURISCVState *env, \ - uint32_t desc) \ -{ \ - /* EEW = 8 */ \ - uint32_t maxsz = simd_maxsz(desc); \ - uint32_t i = env->vstart; \ - \ - memcpy((uint8_t *)vd + H1(i), \ - (uint8_t *)vs2 + H1(i), \ - maxsz - env->vstart); \ - \ - env->vstart = 0; \ -} +void HELPER(vmvr_v)(void *vd, void *vs2, CPURISCVState *env, uint32_t desc) +{ + /* EEW = 8 */ + uint32_t maxsz = simd_maxsz(desc); + uint32_t i = env->vstart; + + memcpy((uint8_t *)vd + H1(i), + (uint8_t *)vs2 + H1(i), + maxsz - env->vstart); -GEN_VEXT_VMV_WHOLE(vmv1r_v, 1) -GEN_VEXT_VMV_WHOLE(vmv2r_v, 2) -GEN_VEXT_VMV_WHOLE(vmv4r_v, 4) -GEN_VEXT_VMV_WHOLE(vmv8r_v, 8) + env->vstart = 0; +} /* Vector Integer Extension */ #define GEN_VEXT_INT_EXT(NAME, ETYPE, DTYPE, HD, HS1) \ diff --git a/target/riscv/insn_trans/trans_rvv.c.inc b/target/riscv/insn_trans/trans_rvv.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_rvv.c.inc +++ b/target/riscv/insn_trans/trans_rvv.c.inc @@ -XXX,XX +XXX,XX @@ static bool trans_vcompress_vm(DisasContext *s, arg_r *a) * Whole Vector Register Move Instructions ignore vtype and vl setting. * Thus, we don't need to check vill bit. (Section 16.6) */ -#define GEN_VMV_WHOLE_TRANS(NAME, LEN, SEQ) \ +#define GEN_VMV_WHOLE_TRANS(NAME, LEN) \ static bool trans_##NAME(DisasContext *s, arg_##NAME * a) \ { \ if (require_rvv(s) && \ @@ -XXX,XX +XXX,XX @@ static bool trans_##NAME(DisasContext *s, arg_##NAME * a) \ } else { \ TCGLabel *over = gen_new_label(); \ tcg_gen_brcondi_tl(TCG_COND_GEU, cpu_vstart, maxsz, over); \ - \ - static gen_helper_gvec_2_ptr * const fns[4] = { \ - gen_helper_vmv1r_v, gen_helper_vmv2r_v, \ - gen_helper_vmv4r_v, gen_helper_vmv8r_v, \ - }; \ tcg_gen_gvec_2_ptr(vreg_ofs(s, a->rd), vreg_ofs(s, a->rs2), \ - cpu_env, maxsz, maxsz, 0, fns[SEQ]); \ + cpu_env, maxsz, maxsz, 0, gen_helper_vmvr_v); \ mark_vs_dirty(s); \ gen_set_label(over); \ } \ @@ -XXX,XX +XXX,XX @@ static bool trans_##NAME(DisasContext *s, arg_##NAME * a) \ return false; \ } -GEN_VMV_WHOLE_TRANS(vmv1r_v, 1, 0) -GEN_VMV_WHOLE_TRANS(vmv2r_v, 2, 1) -GEN_VMV_WHOLE_TRANS(vmv4r_v, 4, 2) -GEN_VMV_WHOLE_TRANS(vmv8r_v, 8, 3) +GEN_VMV_WHOLE_TRANS(vmv1r_v, 1) +GEN_VMV_WHOLE_TRANS(vmv2r_v, 2) +GEN_VMV_WHOLE_TRANS(vmv4r_v, 4) +GEN_VMV_WHOLE_TRANS(vmv8r_v, 8) static bool int_ext_check(DisasContext *s, arg_rmr *a, uint8_t div) { -- 2.35.1 From: Tsukasa OI <research_trasio@irq.a4lg.com> Some bits in RISC-V `misa' CSR should not be reflected in the ISA string. For instance, `S' and `U' (represents existence of supervisor and user mode, respectively) in `misa' CSR must not be copied since neither `S' nor `U' are valid single-letter extensions. This commit also removes all reserved/dropped single-letter "extensions" from the list. - "B": Not going to be a single-letter extension (misa.B is reserved). - "J": Not going to be a single-letter extension (misa.J is reserved). - "K": Not going to be a single-letter extension (misa.K is reserved). - "L": Dropped. - "N": Dropped. - "T": Dropped. It also clarifies that the variable `riscv_single_letter_exts' is a single-letter extension order list. Signed-off-by: Tsukasa OI <research_trasio@irq.a4lg.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <4a4c11213a161a7eedabe46abe58b351bb0e2ef2.1648473008.git.research_trasio@irq.a4lg.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ /* RISC-V CPU definitions */ -static const char riscv_exts[26] = "IEMAFDQCLBJTPVNSUHKORWXYZG"; +static const char riscv_single_letter_exts[] = "IEMAFDQCPVH"; const char * const riscv_int_regnames[] = { "x0/zero", "x1/ra", "x2/sp", "x3/gp", "x4/tp", "x5/t0", "x6/t1", @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_class_init(ObjectClass *c, void *data) char *riscv_isa_string(RISCVCPU *cpu) { int i; - const size_t maxlen = sizeof("rv128") + sizeof(riscv_exts) + 1; + const size_t maxlen = sizeof("rv128") + sizeof(riscv_single_letter_exts); char *isa_str = g_new(char, maxlen); char *p = isa_str + snprintf(isa_str, maxlen, "rv%d", TARGET_LONG_BITS); - for (i = 0; i < sizeof(riscv_exts); i++) { - if (cpu->env.misa_ext & RV(riscv_exts[i])) { - *p++ = qemu_tolower(riscv_exts[i]); + for (i = 0; i < sizeof(riscv_single_letter_exts) - 1; i++) { + if (cpu->env.misa_ext & RV(riscv_single_letter_exts[i])) { + *p++ = qemu_tolower(riscv_single_letter_exts[i]); } } *p = '\0'; -- 2.35.1 From: Atish Patra <atishp@rivosinc.com> The Linux kernel parses the ISA extensions from "riscv,isa" DT property. It used to parse only the single letter base extensions until now. A generic ISA extension parsing framework was proposed[1] recently that can parse multi-letter ISA extensions as well. Generate the extended ISA string by appending the available ISA extensions to the "riscv,isa" string if it is enabled so that kernel can process it. [1] https://lkml.org/lkml/2022/2/15/263 Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Atish Patra <atishp@rivosinc.com> Suggested-by: Heiko Stubner <heiko@sntech.de> Signed-off-by: Atish Patra <atishp@rivosinc.com> Message-Id: <20220329195657.1725425-1-atishp@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 60 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 60 insertions(+) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static const char riscv_single_letter_exts[] = "IEMAFDQCPVH"; +struct isa_ext_data { + const char *name; + bool enabled; +}; + const char * const riscv_int_regnames[] = { "x0/zero", "x1/ra", "x2/sp", "x3/gp", "x4/tp", "x5/t0", "x6/t1", "x7/t2", "x8/s0", "x9/s1", "x10/a0", "x11/a1", "x12/a2", "x13/a3", @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_class_init(ObjectClass *c, void *data) device_class_set_props(dc, riscv_cpu_properties); } +#define ISA_EDATA_ENTRY(name, prop) {#name, cpu->cfg.prop} + +static void riscv_isa_string_ext(RISCVCPU *cpu, char **isa_str, int max_str_len) +{ + char *old = *isa_str; + char *new = *isa_str; + int i; + + /** + * Here are the ordering rules of extension naming defined by RISC-V + * specification : + * 1. All extensions should be separated from other multi-letter extensions + * by an underscore. + * 2. The first letter following the 'Z' conventionally indicates the most + * closely related alphabetical extension category, IMAFDQLCBKJTPVH. + * If multiple 'Z' extensions are named, they should be ordered first + * by category, then alphabetically within a category. + * 3. Standard supervisor-level extensions (starts with 'S') should be + * listed after standard unprivileged extensions. If multiple + * supervisor-level extensions are listed, they should be ordered + * alphabetically. + * 4. Non-standard extensions (starts with 'X') must be listed after all + * standard extensions. They must be separated from other multi-letter + * extensions by an underscore. + */ + struct isa_ext_data isa_edata_arr[] = { + ISA_EDATA_ENTRY(zfh, ext_zfh), + ISA_EDATA_ENTRY(zfhmin, ext_zfhmin), + ISA_EDATA_ENTRY(zfinx, ext_zfinx), + ISA_EDATA_ENTRY(zhinx, ext_zhinx), + ISA_EDATA_ENTRY(zhinxmin, ext_zhinxmin), + ISA_EDATA_ENTRY(zdinx, ext_zdinx), + ISA_EDATA_ENTRY(zba, ext_zba), + ISA_EDATA_ENTRY(zbb, ext_zbb), + ISA_EDATA_ENTRY(zbc, ext_zbc), + ISA_EDATA_ENTRY(zbs, ext_zbs), + ISA_EDATA_ENTRY(zve32f, ext_zve32f), + ISA_EDATA_ENTRY(zve64f, ext_zve64f), + ISA_EDATA_ENTRY(svinval, ext_svinval), + ISA_EDATA_ENTRY(svnapot, ext_svnapot), + ISA_EDATA_ENTRY(svpbmt, ext_svpbmt), + }; + + for (i = 0; i < ARRAY_SIZE(isa_edata_arr); i++) { + if (isa_edata_arr[i].enabled) { + new = g_strconcat(old, "_", isa_edata_arr[i].name, NULL); + g_free(old); + old = new; + } + } + + *isa_str = new; +} + char *riscv_isa_string(RISCVCPU *cpu) { int i; @@ -XXX,XX +XXX,XX @@ char *riscv_isa_string(RISCVCPU *cpu) } } *p = '\0'; + riscv_isa_string_ext(cpu, &isa_str, maxlen); return isa_str; } -- 2.35.1 From: Weiwei Li <liweiwei@iscas.ac.cn> The spec for vmv<nf>r.v says: 'the instructions operate as if EEW=SEW, EMUL = NREG, effective length evl= EMUL * VLEN/SEW.' So the start byte for vstart != 0 should take sew into account Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20220330021316.18223-1-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/vector_helper.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/target/riscv/vector_helper.c b/target/riscv/vector_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/vector_helper.c +++ b/target/riscv/vector_helper.c @@ -XXX,XX +XXX,XX @@ GEN_VEXT_VCOMPRESS_VM(vcompress_vm_d, uint64_t, H8) /* Vector Whole Register Move */ void HELPER(vmvr_v)(void *vd, void *vs2, CPURISCVState *env, uint32_t desc) { - /* EEW = 8 */ + /* EEW = SEW */ uint32_t maxsz = simd_maxsz(desc); - uint32_t i = env->vstart; + uint32_t sewb = 1 << FIELD_EX64(env->vtype, VTYPE, VSEW); + uint32_t startb = env->vstart * sewb; + uint32_t i = startb; memcpy((uint8_t *)vd + H1(i), (uint8_t *)vs2 + H1(i), - maxsz - env->vstart); + maxsz - startb); env->vstart = 0; } -- 2.35.1 From: Richard Henderson <richard.henderson@linaro.org> The riscv_raise_exception function stores its argument into exception_index and then exits to the main loop. When we have already set exception_index, we can just exit directly. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20220401125948.79292-2-richard.henderson@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu_helper.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/target/riscv/cpu_helper.c b/target/riscv/cpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_helper.c +++ b/target/riscv/cpu_helper.c @@ -XXX,XX +XXX,XX @@ void riscv_cpu_do_transaction_failed(CPUState *cs, hwaddr physaddr, env->badaddr = addr; env->two_stage_lookup = riscv_cpu_virt_enabled(env) || riscv_cpu_two_stage_lookup(mmu_idx); - riscv_raise_exception(&cpu->env, cs->exception_index, retaddr); + cpu_loop_exit_restore(cs, retaddr); } void riscv_cpu_do_unaligned_access(CPUState *cs, vaddr addr, @@ -XXX,XX +XXX,XX @@ void riscv_cpu_do_unaligned_access(CPUState *cs, vaddr addr, env->badaddr = addr; env->two_stage_lookup = riscv_cpu_virt_enabled(env) || riscv_cpu_two_stage_lookup(mmu_idx); - riscv_raise_exception(env, cs->exception_index, retaddr); + cpu_loop_exit_restore(cs, retaddr); } bool riscv_cpu_tlb_fill(CPUState *cs, vaddr address, int size, @@ -XXX,XX +XXX,XX @@ bool riscv_cpu_tlb_fill(CPUState *cs, vaddr address, int size, first_stage_error, riscv_cpu_virt_enabled(env) || riscv_cpu_two_stage_lookup(mmu_idx)); - riscv_raise_exception(env, cs->exception_index, retaddr); + cpu_loop_exit_restore(cs, retaddr); } return true; -- 2.35.1 From: Ralf Ramsauer <ralf.ramsauer@oth-regensburg.de> The -bios option is silently ignored if used in combination with -enable-kvm. The reason is that the machine starts in S-Mode, and the bios typically runs in M-Mode. Better exit in that case to not confuse the user. Signed-off-by: Ralf Ramsauer <ralf.ramsauer@oth-regensburg.de> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Anup Patel <anup@brainfault.org> Message-Id: <20220401121842.2791796-1-ralf.ramsauer@oth-regensburg.de> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_machine_init(MachineState *machine) /* * Only direct boot kernel is currently supported for KVM VM, - * so the "-bios" parameter is ignored and treated like "-bios none" - * when KVM is enabled. + * so the "-bios" parameter is not supported when KVM is enabled. */ if (kvm_enabled()) { - g_free(machine->firmware); - machine->firmware = g_strdup("none"); + if (machine->firmware) { + if (strcmp(machine->firmware, "none")) { + error_report("Machine mode firmware is not supported in " + "combination with KVM."); + exit(1); + } + } else { + machine->firmware = g_strdup("none"); + } } if (riscv_is_32bit(&s->soc[0])) { -- 2.35.1 From: Nicolas Pitre <nico@fluxnic.net> There is an overflow with the current code where a pmpaddr value of 0x1fffffff is decoded as sa=0 and ea=0 whereas it should be sa=0 and ea=0xffffffff. Fix that by simplifying the computation. There is in fact no need for ctz64() nor special case for -1 to achieve proper results. Signed-off-by: Nicolas Pitre <nico@fluxnic.net> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <rq81o86n-17ps-92no-p65o-79o88476266@syhkavp.arg> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/pmp.c | 14 +++----------- 1 file changed, 3 insertions(+), 11 deletions(-) diff --git a/target/riscv/pmp.c b/target/riscv/pmp.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/pmp.c +++ b/target/riscv/pmp.c @@ -XXX,XX +XXX,XX @@ static void pmp_decode_napot(target_ulong a, target_ulong *sa, target_ulong *ea) 0111...1111 2^(XLEN+2)-byte NAPOT range 1111...1111 Reserved */ - if (a == -1) { - *sa = 0u; - *ea = -1; - return; - } else { - target_ulong t1 = ctz64(~a); - target_ulong base = (a & ~(((target_ulong)1 << t1) - 1)) << 2; - target_ulong range = ((target_ulong)1 << (t1 + 3)) - 1; - *sa = base; - *ea = base + range; - } + a = (a << 2) | 0x3; + *sa = a & (a + 1); + *ea = a | (a + 1); } void pmp_update_rule_addr(CPURISCVState *env, uint32_t pmp_index) -- 2.35.1 From: Niklas Cassel <niklas.cassel@wdc.com> The device tree property "mmu-type" is currently exported as either "riscv,sv32" or "riscv,sv48". However, the riscv cpu device tree binding [1] has a specific value "riscv,none" for a HART without a MMU. Set the device tree property "mmu-type" to "riscv,none" when the CPU mmu option is disabled using rv32,mmu=off or rv64,mmu=off. [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/riscv/cpus.yaml?h=v5.17 Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20220414155510.1364147-1-niklas.cassel@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_socket_cpus(RISCVVirtState *s, int socket, cpu_name = g_strdup_printf("/cpus/cpu@%d", s->soc[socket].hartid_base + cpu); qemu_fdt_add_subnode(mc->fdt, cpu_name); - qemu_fdt_setprop_string(mc->fdt, cpu_name, "mmu-type", - (is_32_bit) ? "riscv,sv32" : "riscv,sv48"); + if (riscv_feature(&s->soc[socket].harts[cpu].env, + RISCV_FEATURE_MMU)) { + qemu_fdt_setprop_string(mc->fdt, cpu_name, "mmu-type", + (is_32_bit) ? "riscv,sv32" : "riscv,sv48"); + } else { + qemu_fdt_setprop_string(mc->fdt, cpu_name, "mmu-type", + "riscv,none"); + } name = riscv_isa_string(&s->soc[socket].harts[cpu]); qemu_fdt_setprop_string(mc->fdt, cpu_name, "riscv,isa", name); g_free(name); -- 2.35.1 From: Frank Chang <frank.chang@sifive.com> If device's MemoryRegion doesn't have .impl.[min|max]_access_size declaration, the default access_size_min would be 1 byte and access_size_max would be 4 bytes (see: softmmu/memory.c). This will cause a 64-bit memory access to ACLINT to be splitted into two 32-bit memory accesses. Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Jim Shu <jim.shu@sifive.com> Message-Id: <20220420080901.14655-2-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/intc/riscv_aclint.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/hw/intc/riscv_aclint.c b/hw/intc/riscv_aclint.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/riscv_aclint.c +++ b/hw/intc/riscv_aclint.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps riscv_aclint_mtimer_ops = { .valid = { .min_access_size = 4, .max_access_size = 8 + }, + .impl = { + .min_access_size = 4, + .max_access_size = 8, } }; -- 2.35.1 From: Frank Chang <frank.chang@sifive.com> RISC-V privilege spec defines that: * In RV32, memory-mapped writes to mtimecmp modify only one 32-bit part of the register. * For RV64, naturally aligned 64-bit memory accesses to the mtime and mtimecmp registers are additionally supported and are atomic. It's possible to perform both 32/64-bit read/write accesses to both mtimecmp and mtime registers. Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Jim Shu <jim.shu@sifive.com> Message-Id: <20220420080901.14655-3-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/intc/riscv_aclint.c | 42 +++++++++++++++++++++++++++--------------- 1 file changed, 27 insertions(+), 15 deletions(-) diff --git a/hw/intc/riscv_aclint.c b/hw/intc/riscv_aclint.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/riscv_aclint.c +++ b/hw/intc/riscv_aclint.c @@ -XXX,XX +XXX,XX @@ static uint64_t riscv_aclint_mtimer_read(void *opaque, hwaddr addr, qemu_log_mask(LOG_GUEST_ERROR, "aclint-mtimer: invalid hartid: %zu", hartid); } else if ((addr & 0x7) == 0) { - /* timecmp_lo */ + /* timecmp_lo for RV32/RV64 or timecmp for RV64 */ uint64_t timecmp = env->timecmp; - return timecmp & 0xFFFFFFFF; + return (size == 4) ? (timecmp & 0xFFFFFFFF) : timecmp; } else if ((addr & 0x7) == 4) { /* timecmp_hi */ uint64_t timecmp = env->timecmp; @@ -XXX,XX +XXX,XX @@ static uint64_t riscv_aclint_mtimer_read(void *opaque, hwaddr addr, return 0; } } else if (addr == mtimer->time_base) { - /* time_lo */ - return cpu_riscv_read_rtc(mtimer->timebase_freq) & 0xFFFFFFFF; + /* time_lo for RV32/RV64 or timecmp for RV64 */ + uint64_t rtc = cpu_riscv_read_rtc(mtimer->timebase_freq); + return (size == 4) ? (rtc & 0xFFFFFFFF) : rtc; } else if (addr == mtimer->time_base + 4) { /* time_hi */ return (cpu_riscv_read_rtc(mtimer->timebase_freq) >> 32) & 0xFFFFFFFF; @@ -XXX,XX +XXX,XX @@ static void riscv_aclint_mtimer_write(void *opaque, hwaddr addr, qemu_log_mask(LOG_GUEST_ERROR, "aclint-mtimer: invalid hartid: %zu", hartid); } else if ((addr & 0x7) == 0) { - /* timecmp_lo */ - uint64_t timecmp_hi = env->timecmp >> 32; - riscv_aclint_mtimer_write_timecmp(mtimer, RISCV_CPU(cpu), hartid, - timecmp_hi << 32 | (value & 0xFFFFFFFF), - mtimer->timebase_freq); - return; + if (size == 4) { + /* timecmp_lo for RV32/RV64 */ + uint64_t timecmp_hi = env->timecmp >> 32; + riscv_aclint_mtimer_write_timecmp(mtimer, RISCV_CPU(cpu), hartid, + timecmp_hi << 32 | (value & 0xFFFFFFFF), + mtimer->timebase_freq); + } else { + /* timecmp for RV64 */ + riscv_aclint_mtimer_write_timecmp(mtimer, RISCV_CPU(cpu), hartid, + value, mtimer->timebase_freq); + } } else if ((addr & 0x7) == 4) { - /* timecmp_hi */ - uint64_t timecmp_lo = env->timecmp; - riscv_aclint_mtimer_write_timecmp(mtimer, RISCV_CPU(cpu), hartid, - value << 32 | (timecmp_lo & 0xFFFFFFFF), - mtimer->timebase_freq); + if (size == 4) { + /* timecmp_hi for RV32/RV64 */ + uint64_t timecmp_lo = env->timecmp; + riscv_aclint_mtimer_write_timecmp(mtimer, RISCV_CPU(cpu), hartid, + value << 32 | (timecmp_lo & 0xFFFFFFFF), + mtimer->timebase_freq); + } else { + qemu_log_mask(LOG_GUEST_ERROR, + "aclint-mtimer: invalid timecmp_hi write: %08x", + (uint32_t)addr); + } } else { qemu_log_mask(LOG_UNIMP, "aclint-mtimer: invalid timecmp write: %08x", -- 2.35.1 From: Frank Chang <frank.chang@sifive.com> RISC-V privilege spec defines that mtime is exposed as a memory-mapped machine-mode read-write register. However, as QEMU uses host monotonic timer as timer source, this makes mtime to be read-only in RISC-V ACLINT. This patch makes mtime to be writable by recording the time delta value between the mtime value to be written and the timer value at the time mtime is written. Time delta value is then added back whenever the timer value is retrieved. Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20220420080901.14655-4-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/intc/riscv_aclint.h | 1 + target/riscv/cpu.h | 8 ++-- hw/intc/riscv_aclint.c | 71 ++++++++++++++++++++++++---------- target/riscv/cpu_helper.c | 4 +- 4 files changed, 57 insertions(+), 27 deletions(-) diff --git a/include/hw/intc/riscv_aclint.h b/include/hw/intc/riscv_aclint.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/riscv_aclint.h +++ b/include/hw/intc/riscv_aclint.h @@ -XXX,XX +XXX,XX @@ typedef struct RISCVAclintMTimerState { /*< private >*/ SysBusDevice parent_obj; + uint64_t time_delta; /*< public >*/ MemoryRegion mmio; diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ struct CPUArchState { type2_trigger_t type2_trig[TRIGGER_TYPE2_NUM]; /* machine specific rdtime callback */ - uint64_t (*rdtime_fn)(uint32_t); - uint32_t rdtime_fn_arg; + uint64_t (*rdtime_fn)(void *); + void *rdtime_fn_arg; /* machine specific AIA ireg read-modify-write callback */ #define AIA_MAKE_IREG(__isel, __priv, __virt, __vgein, __xlen) \ @@ -XXX,XX +XXX,XX @@ void riscv_cpu_swap_hypervisor_regs(CPURISCVState *env); int riscv_cpu_claim_interrupts(RISCVCPU *cpu, uint64_t interrupts); uint64_t riscv_cpu_update_mip(RISCVCPU *cpu, uint64_t mask, uint64_t value); #define BOOL_TO_MASK(x) (-!!(x)) /* helper for riscv_cpu_update_mip value */ -void riscv_cpu_set_rdtime_fn(CPURISCVState *env, uint64_t (*fn)(uint32_t), - uint32_t arg); +void riscv_cpu_set_rdtime_fn(CPURISCVState *env, uint64_t (*fn)(void *), + void *arg); void riscv_cpu_set_aia_ireg_rmw_fn(CPURISCVState *env, uint32_t priv, int (*rmw_fn)(void *arg, target_ulong reg, diff --git a/hw/intc/riscv_aclint.c b/hw/intc/riscv_aclint.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/riscv_aclint.c +++ b/hw/intc/riscv_aclint.c @@ -XXX,XX +XXX,XX @@ typedef struct riscv_aclint_mtimer_callback { int num; } riscv_aclint_mtimer_callback; -static uint64_t cpu_riscv_read_rtc(uint32_t timebase_freq) +static uint64_t cpu_riscv_read_rtc_raw(uint32_t timebase_freq) { return muldiv64(qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL), timebase_freq, NANOSECONDS_PER_SECOND); } +static uint64_t cpu_riscv_read_rtc(void *opaque) +{ + RISCVAclintMTimerState *mtimer = opaque; + return cpu_riscv_read_rtc_raw(mtimer->timebase_freq) + mtimer->time_delta; +} + /* * Called when timecmp is written to update the QEMU timer or immediately * trigger timer interrupt if mtimecmp <= current timer value. @@ -XXX,XX +XXX,XX @@ static uint64_t cpu_riscv_read_rtc(uint32_t timebase_freq) static void riscv_aclint_mtimer_write_timecmp(RISCVAclintMTimerState *mtimer, RISCVCPU *cpu, int hartid, - uint64_t value, - uint32_t timebase_freq) + uint64_t value) { + uint32_t timebase_freq = mtimer->timebase_freq; uint64_t next; uint64_t diff; - uint64_t rtc_r = cpu_riscv_read_rtc(timebase_freq); + uint64_t rtc_r = cpu_riscv_read_rtc(mtimer); cpu->env.timecmp = value; if (cpu->env.timecmp <= rtc_r) { @@ -XXX,XX +XXX,XX @@ static uint64_t riscv_aclint_mtimer_read(void *opaque, hwaddr addr, } } else if (addr == mtimer->time_base) { /* time_lo for RV32/RV64 or timecmp for RV64 */ - uint64_t rtc = cpu_riscv_read_rtc(mtimer->timebase_freq); + uint64_t rtc = cpu_riscv_read_rtc(mtimer); return (size == 4) ? (rtc & 0xFFFFFFFF) : rtc; } else if (addr == mtimer->time_base + 4) { /* time_hi */ - return (cpu_riscv_read_rtc(mtimer->timebase_freq) >> 32) & 0xFFFFFFFF; + return (cpu_riscv_read_rtc(mtimer) >> 32) & 0xFFFFFFFF; } qemu_log_mask(LOG_UNIMP, @@ -XXX,XX +XXX,XX @@ static void riscv_aclint_mtimer_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { RISCVAclintMTimerState *mtimer = opaque; + int i; if (addr >= mtimer->timecmp_base && addr < (mtimer->timecmp_base + (mtimer->num_harts << 3))) { @@ -XXX,XX +XXX,XX @@ static void riscv_aclint_mtimer_write(void *opaque, hwaddr addr, /* timecmp_lo for RV32/RV64 */ uint64_t timecmp_hi = env->timecmp >> 32; riscv_aclint_mtimer_write_timecmp(mtimer, RISCV_CPU(cpu), hartid, - timecmp_hi << 32 | (value & 0xFFFFFFFF), - mtimer->timebase_freq); + timecmp_hi << 32 | (value & 0xFFFFFFFF)); } else { /* timecmp for RV64 */ riscv_aclint_mtimer_write_timecmp(mtimer, RISCV_CPU(cpu), hartid, - value, mtimer->timebase_freq); + value); } } else if ((addr & 0x7) == 4) { if (size == 4) { /* timecmp_hi for RV32/RV64 */ uint64_t timecmp_lo = env->timecmp; riscv_aclint_mtimer_write_timecmp(mtimer, RISCV_CPU(cpu), hartid, - value << 32 | (timecmp_lo & 0xFFFFFFFF), - mtimer->timebase_freq); + value << 32 | (timecmp_lo & 0xFFFFFFFF)); } else { qemu_log_mask(LOG_GUEST_ERROR, "aclint-mtimer: invalid timecmp_hi write: %08x", @@ -XXX,XX +XXX,XX @@ static void riscv_aclint_mtimer_write(void *opaque, hwaddr addr, (uint32_t)addr); } return; - } else if (addr == mtimer->time_base) { - /* time_lo */ - qemu_log_mask(LOG_UNIMP, - "aclint-mtimer: time_lo write not implemented"); - return; - } else if (addr == mtimer->time_base + 4) { - /* time_hi */ - qemu_log_mask(LOG_UNIMP, - "aclint-mtimer: time_hi write not implemented"); + } else if (addr == mtimer->time_base || addr == mtimer->time_base + 4) { + uint64_t rtc_r = cpu_riscv_read_rtc_raw(mtimer->timebase_freq); + + if (addr == mtimer->time_base) { + if (size == 4) { + /* time_lo for RV32/RV64 */ + mtimer->time_delta = ((rtc_r & ~0xFFFFFFFFULL) | value) - rtc_r; + } else { + /* time for RV64 */ + mtimer->time_delta = value - rtc_r; + } + } else { + if (size == 4) { + /* time_hi for RV32/RV64 */ + mtimer->time_delta = (value << 32 | (rtc_r & 0xFFFFFFFF)) - rtc_r; + } else { + qemu_log_mask(LOG_GUEST_ERROR, + "aclint-mtimer: invalid time_hi write: %08x", + (uint32_t)addr); + return; + } + } + + /* Check if timer interrupt is triggered for each hart. */ + for (i = 0; i < mtimer->num_harts; i++) { + CPUState *cpu = qemu_get_cpu(mtimer->hartid_base + i); + CPURISCVState *env = cpu ? cpu->env_ptr : NULL; + if (!env) { + continue; + } + riscv_aclint_mtimer_write_timecmp(mtimer, RISCV_CPU(cpu), + i, env->timecmp); + } return; } @@ -XXX,XX +XXX,XX @@ DeviceState *riscv_aclint_mtimer_create(hwaddr addr, hwaddr size, continue; } if (provide_rdtime) { - riscv_cpu_set_rdtime_fn(env, cpu_riscv_read_rtc, timebase_freq); + riscv_cpu_set_rdtime_fn(env, cpu_riscv_read_rtc, dev); } cb->s = RISCV_ACLINT_MTIMER(dev); diff --git a/target/riscv/cpu_helper.c b/target/riscv/cpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_helper.c +++ b/target/riscv/cpu_helper.c @@ -XXX,XX +XXX,XX @@ uint64_t riscv_cpu_update_mip(RISCVCPU *cpu, uint64_t mask, uint64_t value) return old; } -void riscv_cpu_set_rdtime_fn(CPURISCVState *env, uint64_t (*fn)(uint32_t), - uint32_t arg) +void riscv_cpu_set_rdtime_fn(CPURISCVState *env, uint64_t (*fn)(void *), + void *arg) { env->rdtime_fn = fn; env->rdtime_fn_arg = arg; -- 2.35.1 From: Jim Shu <jim.shu@sifive.com> This commit implements reset function of all ACLINT devices. ACLINT device reset will clear MTIME and MSIP register to 0. Depend on RISC-V ACLINT spec v1.0-rc4: https://github.com/riscv/riscv-aclint/blob/v1.0-rc4/riscv-aclint.adoc Signed-off-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20220420080901.14655-5-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/intc/riscv_aclint.c | 39 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) diff --git a/hw/intc/riscv_aclint.c b/hw/intc/riscv_aclint.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/riscv_aclint.c +++ b/hw/intc/riscv_aclint.c @@ -XXX,XX +XXX,XX @@ static void riscv_aclint_mtimer_realize(DeviceState *dev, Error **errp) } } +static void riscv_aclint_mtimer_reset_enter(Object *obj, ResetType type) +{ + /* + * According to RISC-V ACLINT spec: + * - On MTIMER device reset, the MTIME register is cleared to zero. + * - On MTIMER device reset, the MTIMECMP registers are in unknown state. + */ + RISCVAclintMTimerState *mtimer = RISCV_ACLINT_MTIMER(obj); + + /* + * Clear mtime register by writing to 0 it. + * Pending mtime interrupts will also be cleared at the same time. + */ + riscv_aclint_mtimer_write(mtimer, mtimer->time_base, 0, 8); +} + static void riscv_aclint_mtimer_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); dc->realize = riscv_aclint_mtimer_realize; device_class_set_props(dc, riscv_aclint_mtimer_properties); + ResettableClass *rc = RESETTABLE_CLASS(klass); + rc->phases.enter = riscv_aclint_mtimer_reset_enter; } static const TypeInfo riscv_aclint_mtimer_info = { @@ -XXX,XX +XXX,XX @@ static void riscv_aclint_swi_realize(DeviceState *dev, Error **errp) } } +static void riscv_aclint_swi_reset_enter(Object *obj, ResetType type) +{ + /* + * According to RISC-V ACLINT spec: + * - On MSWI device reset, each MSIP register is cleared to zero. + * + * p.s. SSWI device reset does nothing since SETSIP register always reads 0. + */ + RISCVAclintSwiState *swi = RISCV_ACLINT_SWI(obj); + int i; + + if (!swi->sswi) { + for (i = 0; i < swi->num_harts; i++) { + /* Clear MSIP registers by lowering software interrupts. */ + qemu_irq_lower(swi->soft_irqs[i]); + } + } +} + static void riscv_aclint_swi_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); dc->realize = riscv_aclint_swi_realize; device_class_set_props(dc, riscv_aclint_swi_properties); + ResettableClass *rc = RESETTABLE_CLASS(klass); + rc->phases.enter = riscv_aclint_swi_reset_enter; } static const TypeInfo riscv_aclint_swi_info = { -- 2.35.1 From: Bin Meng <bin.meng@windriver.com> Implement .debug_excp_handler, .debug_check_{breakpoint, watchpoint} TCGCPUOps and hook them into riscv_tcg_ops. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20220421003324.1134983-2-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/debug.h | 4 +++ target/riscv/cpu.c | 3 ++ target/riscv/debug.c | 75 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 82 insertions(+) diff --git a/target/riscv/debug.h b/target/riscv/debug.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/debug.h +++ b/target/riscv/debug.h @@ -XXX,XX +XXX,XX @@ void tselect_csr_write(CPURISCVState *env, target_ulong val); target_ulong tdata_csr_read(CPURISCVState *env, int tdata_index); void tdata_csr_write(CPURISCVState *env, int tdata_index, target_ulong val); +void riscv_cpu_debug_excp_handler(CPUState *cs); +bool riscv_cpu_debug_check_breakpoint(CPUState *cs); +bool riscv_cpu_debug_check_watchpoint(CPUState *cs, CPUWatchpoint *wp); + #endif /* RISCV_DEBUG_H */ diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static const struct TCGCPUOps riscv_tcg_ops = { .do_interrupt = riscv_cpu_do_interrupt, .do_transaction_failed = riscv_cpu_do_transaction_failed, .do_unaligned_access = riscv_cpu_do_unaligned_access, + .debug_excp_handler = riscv_cpu_debug_excp_handler, + .debug_check_breakpoint = riscv_cpu_debug_check_breakpoint, + .debug_check_watchpoint = riscv_cpu_debug_check_watchpoint, #endif /* !CONFIG_USER_ONLY */ }; diff --git a/target/riscv/debug.c b/target/riscv/debug.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/debug.c +++ b/target/riscv/debug.c @@ -XXX,XX +XXX,XX @@ void tdata_csr_write(CPURISCVState *env, int tdata_index, target_ulong val) return write_func(env, env->trigger_cur, tdata_index, val); } + +void riscv_cpu_debug_excp_handler(CPUState *cs) +{ + RISCVCPU *cpu = RISCV_CPU(cs); + CPURISCVState *env = &cpu->env; + + if (cs->watchpoint_hit) { + if (cs->watchpoint_hit->flags & BP_CPU) { + cs->watchpoint_hit = NULL; + riscv_raise_exception(env, RISCV_EXCP_BREAKPOINT, 0); + } + } else { + if (cpu_breakpoint_test(cs, env->pc, BP_CPU)) { + riscv_raise_exception(env, RISCV_EXCP_BREAKPOINT, 0); + } + } +} + +bool riscv_cpu_debug_check_breakpoint(CPUState *cs) +{ + RISCVCPU *cpu = RISCV_CPU(cs); + CPURISCVState *env = &cpu->env; + CPUBreakpoint *bp; + target_ulong ctrl; + target_ulong pc; + int i; + + QTAILQ_FOREACH(bp, &cs->breakpoints, entry) { + for (i = 0; i < TRIGGER_TYPE2_NUM; i++) { + ctrl = env->type2_trig[i].mcontrol; + pc = env->type2_trig[i].maddress; + + if ((ctrl & TYPE2_EXEC) && (bp->pc == pc)) { + /* check U/S/M bit against current privilege level */ + if ((ctrl >> 3) & BIT(env->priv)) { + return true; + } + } + } + } + + return false; +} + +bool riscv_cpu_debug_check_watchpoint(CPUState *cs, CPUWatchpoint *wp) +{ + RISCVCPU *cpu = RISCV_CPU(cs); + CPURISCVState *env = &cpu->env; + target_ulong ctrl; + target_ulong addr; + int flags; + int i; + + for (i = 0; i < TRIGGER_TYPE2_NUM; i++) { + ctrl = env->type2_trig[i].mcontrol; + addr = env->type2_trig[i].maddress; + flags = 0; + + if (ctrl & TYPE2_LOAD) { + flags |= BP_MEM_READ; + } + if (ctrl & TYPE2_STORE) { + flags |= BP_MEM_WRITE; + } + + if ((wp->flags & flags) && (wp->vaddr == addr)) { + /* check U/S/M bit against current privilege level */ + if ((ctrl >> 3) & BIT(env->priv)) { + return true; + } + } + } + + return false; +} -- 2.35.1 From: Bin Meng <bin.meng@windriver.com> Add a config option to enable support for native M-mode debug. This is disabled by default and can be enabled with 'debug=true'. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20220421003324.1134983-3-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 4 +++- target/riscv/cpu.c | 5 +++++ 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ enum { RISCV_FEATURE_PMP, RISCV_FEATURE_EPMP, RISCV_FEATURE_MISA, - RISCV_FEATURE_AIA + RISCV_FEATURE_AIA, + RISCV_FEATURE_DEBUG }; /* Privileged specification version */ @@ -XXX,XX +XXX,XX @@ struct RISCVCPUConfig { bool pmp; bool epmp; bool aia; + bool debug; uint64_t resetvec; }; diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_realize(DeviceState *dev, Error **errp) riscv_set_feature(env, RISCV_FEATURE_AIA); } + if (cpu->cfg.debug) { + riscv_set_feature(env, RISCV_FEATURE_DEBUG); + } + set_resetvec(env, cpu->cfg.resetvec); /* Validate that MISA_MXL is set properly. */ @@ -XXX,XX +XXX,XX @@ static Property riscv_cpu_properties[] = { DEFINE_PROP_BOOL("Zve64f", RISCVCPU, cfg.ext_zve64f, false), DEFINE_PROP_BOOL("mmu", RISCVCPU, cfg.mmu, true), DEFINE_PROP_BOOL("pmp", RISCVCPU, cfg.pmp, true), + DEFINE_PROP_BOOL("debug", RISCVCPU, cfg.debug, false), DEFINE_PROP_STRING("priv_spec", RISCVCPU, cfg.priv_spec), DEFINE_PROP_STRING("vext_spec", RISCVCPU, cfg.vext_spec), -- 2.35.1 From: Bin Meng <bin.meng@windriver.com> This adds debug CSR read/write support to the RISC-V CSR RW table. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20220421003324.1134983-4-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/debug.h | 2 ++ target/riscv/cpu.c | 4 ++++ target/riscv/csr.c | 57 ++++++++++++++++++++++++++++++++++++++++++++ target/riscv/debug.c | 27 +++++++++++++++++++++ 4 files changed, 90 insertions(+) diff --git a/target/riscv/debug.h b/target/riscv/debug.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/debug.h +++ b/target/riscv/debug.h @@ -XXX,XX +XXX,XX @@ void riscv_cpu_debug_excp_handler(CPUState *cs); bool riscv_cpu_debug_check_breakpoint(CPUState *cs); bool riscv_cpu_debug_check_watchpoint(CPUState *cs, CPUWatchpoint *wp); +void riscv_trigger_init(CPURISCVState *env); + #endif /* RISCV_DEBUG_H */ diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_reset(DeviceState *dev) set_default_nan_mode(1, &env->fp_status); #ifndef CONFIG_USER_ONLY + if (riscv_feature(env, RISCV_FEATURE_DEBUG)) { + riscv_trigger_init(env); + } + if (kvm_enabled()) { kvm_riscv_reset_vcpu(cpu); } diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException epmp(CPURISCVState *env, int csrno) return RISCV_EXCP_ILLEGAL_INST; } + +static RISCVException debug(CPURISCVState *env, int csrno) +{ + if (riscv_feature(env, RISCV_FEATURE_DEBUG)) { + return RISCV_EXCP_NONE; + } + + return RISCV_EXCP_ILLEGAL_INST; +} #endif /* User Floating-Point CSRs */ @@ -XXX,XX +XXX,XX @@ static RISCVException write_pmpaddr(CPURISCVState *env, int csrno, return RISCV_EXCP_NONE; } +static RISCVException read_tselect(CPURISCVState *env, int csrno, + target_ulong *val) +{ + *val = tselect_csr_read(env); + return RISCV_EXCP_NONE; +} + +static RISCVException write_tselect(CPURISCVState *env, int csrno, + target_ulong val) +{ + tselect_csr_write(env, val); + return RISCV_EXCP_NONE; +} + +static RISCVException read_tdata(CPURISCVState *env, int csrno, + target_ulong *val) +{ + /* return 0 in tdata1 to end the trigger enumeration */ + if (env->trigger_cur >= TRIGGER_NUM && csrno == CSR_TDATA1) { + *val = 0; + return RISCV_EXCP_NONE; + } + + if (!tdata_available(env, csrno - CSR_TDATA1)) { + return RISCV_EXCP_ILLEGAL_INST; + } + + *val = tdata_csr_read(env, csrno - CSR_TDATA1); + return RISCV_EXCP_NONE; +} + +static RISCVException write_tdata(CPURISCVState *env, int csrno, + target_ulong val) +{ + if (!tdata_available(env, csrno - CSR_TDATA1)) { + return RISCV_EXCP_ILLEGAL_INST; + } + + tdata_csr_write(env, csrno - CSR_TDATA1, val); + return RISCV_EXCP_NONE; +} + /* * Functions to access Pointer Masking feature registers * We have to check if current priv lvl could modify @@ -XXX,XX +XXX,XX @@ riscv_csr_operations csr_ops[CSR_TABLE_SIZE] = { [CSR_PMPADDR14] = { "pmpaddr14", pmp, read_pmpaddr, write_pmpaddr }, [CSR_PMPADDR15] = { "pmpaddr15", pmp, read_pmpaddr, write_pmpaddr }, + /* Debug CSRs */ + [CSR_TSELECT] = { "tselect", debug, read_tselect, write_tselect }, + [CSR_TDATA1] = { "tdata1", debug, read_tdata, write_tdata }, + [CSR_TDATA2] = { "tdata2", debug, read_tdata, write_tdata }, + [CSR_TDATA3] = { "tdata3", debug, read_tdata, write_tdata }, + /* User Pointer Masking */ [CSR_UMTE] = { "umte", pointer_masking, read_umte, write_umte }, [CSR_UPMMASK] = { "upmmask", pointer_masking, read_upmmask, write_upmmask }, diff --git a/target/riscv/debug.c b/target/riscv/debug.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/debug.c +++ b/target/riscv/debug.c @@ -XXX,XX +XXX,XX @@ bool riscv_cpu_debug_check_watchpoint(CPUState *cs, CPUWatchpoint *wp) return false; } + +void riscv_trigger_init(CPURISCVState *env) +{ + target_ulong type2 = trigger_type(env, TRIGGER_TYPE_AD_MATCH); + int i; + + /* type 2 triggers */ + for (i = 0; i < TRIGGER_TYPE2_NUM; i++) { + /* + * type = TRIGGER_TYPE_AD_MATCH + * dmode = 0 (both debug and M-mode can write tdata) + * maskmax = 0 (unimplemented, always 0) + * sizehi = 0 (match against any size, RV64 only) + * hit = 0 (unimplemented, always 0) + * select = 0 (always 0, perform match on address) + * timing = 0 (always 0, trigger before instruction) + * sizelo = 0 (match against any size) + * action = 0 (always 0, raise a breakpoint exception) + * chain = 0 (unimplemented, always 0) + * match = 0 (always 0, when any compare value equals tdata2) + */ + env->type2_trig[i].mcontrol = type2; + env->type2_trig[i].maddress = 0; + env->type2_trig[i].bp = NULL; + env->type2_trig[i].wp = NULL; + } +} -- 2.35.1 From: Bin Meng <bin.meng@windriver.com> Add a subsection to machine.c to migrate debug CSR state. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20220421003324.1134983-5-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/machine.c | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/target/riscv/machine.c b/target/riscv/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/machine.c +++ b/target/riscv/machine.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_kvmtimer = { VMSTATE_UINT64(env.kvm_timer_time, RISCVCPU), VMSTATE_UINT64(env.kvm_timer_compare, RISCVCPU), VMSTATE_UINT64(env.kvm_timer_state, RISCVCPU), + VMSTATE_END_OF_LIST() + } +}; + +static bool debug_needed(void *opaque) +{ + RISCVCPU *cpu = opaque; + CPURISCVState *env = &cpu->env; + + return riscv_feature(env, RISCV_FEATURE_DEBUG); +} +static const VMStateDescription vmstate_debug_type2 = { + .name = "cpu/debug/type2", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINTTL(mcontrol, type2_trigger_t), + VMSTATE_UINTTL(maddress, type2_trigger_t), + VMSTATE_END_OF_LIST() + } +}; + +static const VMStateDescription vmstate_debug = { + .name = "cpu/debug", + .version_id = 1, + .minimum_version_id = 1, + .needed = debug_needed, + .fields = (VMStateField[]) { + VMSTATE_UINTTL(env.trigger_cur, RISCVCPU), + VMSTATE_STRUCT_ARRAY(env.type2_trig, RISCVCPU, TRIGGER_TYPE2_NUM, + 0, vmstate_debug_type2, type2_trigger_t), VMSTATE_END_OF_LIST() } }; @@ -XXX,XX +XXX,XX @@ const VMStateDescription vmstate_riscv_cpu = { &vmstate_rv128, &vmstate_kvmtimer, &vmstate_envcfg, + &vmstate_debug, NULL } }; -- 2.35.1 From: Bin Meng <bin.meng@windriver.com> Turn on native debug feature by default for all CPUs. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20220421003324.1134983-6-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static Property riscv_cpu_properties[] = { DEFINE_PROP_BOOL("Zve64f", RISCVCPU, cfg.ext_zve64f, false), DEFINE_PROP_BOOL("mmu", RISCVCPU, cfg.mmu, true), DEFINE_PROP_BOOL("pmp", RISCVCPU, cfg.pmp, true), - DEFINE_PROP_BOOL("debug", RISCVCPU, cfg.debug, false), + DEFINE_PROP_BOOL("debug", RISCVCPU, cfg.debug, true), DEFINE_PROP_STRING("priv_spec", RISCVCPU, cfg.priv_spec), DEFINE_PROP_STRING("vext_spec", RISCVCPU, cfg.vext_spec), -- 2.35.1 From: Bin Meng <bin.meng@windriver.com> This is now used by RISC-V as well. Update the comments. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20220421003324.1134983-7-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/core/tcg-cpu-ops.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/hw/core/tcg-cpu-ops.h b/include/hw/core/tcg-cpu-ops.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/core/tcg-cpu-ops.h +++ b/include/hw/core/tcg-cpu-ops.h @@ -XXX,XX +XXX,XX @@ struct TCGCPUOps { /** * @debug_check_watchpoint: return true if the architectural * watchpoint whose address has matched should really fire, used by ARM + * and RISC-V */ bool (*debug_check_watchpoint)(CPUState *cpu, CPUWatchpoint *wp); -- 2.35.1 From: Dylan Jhong <dylan@andestech.com> The current riscv_load_fdt() forces fdt_load_addr to be placed at a dram address within 3GB, but not all platforms have dram_base within 3GB. This patch adds an exception for dram base not within 3GB, which will place fdt at dram_end align 16MB. riscv_setup_rom_reset_vec() also needs to be modified Signed-off-by: Dylan Jhong <dylan@andestech.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20220419115945.37945-1-dylan@andestech.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/riscv/boot.h | 4 ++-- hw/riscv/boot.c | 12 +++++++----- 2 files changed, 9 insertions(+), 7 deletions(-) diff --git a/include/hw/riscv/boot.h b/include/hw/riscv/boot.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/riscv/boot.h +++ b/include/hw/riscv/boot.h @@ -XXX,XX +XXX,XX @@ target_ulong riscv_load_kernel(const char *kernel_filename, symbol_fn_t sym_cb); hwaddr riscv_load_initrd(const char *filename, uint64_t mem_size, uint64_t kernel_entry, hwaddr *start); -uint32_t riscv_load_fdt(hwaddr dram_start, uint64_t dram_size, void *fdt); +uint64_t riscv_load_fdt(hwaddr dram_start, uint64_t dram_size, void *fdt); void riscv_setup_rom_reset_vec(MachineState *machine, RISCVHartArrayState *harts, hwaddr saddr, hwaddr rom_base, hwaddr rom_size, uint64_t kernel_entry, - uint32_t fdt_load_addr, void *fdt); + uint64_t fdt_load_addr, void *fdt); void riscv_rom_copy_firmware_info(MachineState *machine, hwaddr rom_base, hwaddr rom_size, uint32_t reset_vec_size, diff --git a/hw/riscv/boot.c b/hw/riscv/boot.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/boot.c +++ b/hw/riscv/boot.c @@ -XXX,XX +XXX,XX @@ hwaddr riscv_load_initrd(const char *filename, uint64_t mem_size, return *start + size; } -uint32_t riscv_load_fdt(hwaddr dram_base, uint64_t mem_size, void *fdt) +uint64_t riscv_load_fdt(hwaddr dram_base, uint64_t mem_size, void *fdt) { - uint32_t temp, fdt_addr; + uint64_t temp, fdt_addr; hwaddr dram_end = dram_base + mem_size; int ret, fdtsize = fdt_totalsize(fdt); @@ -XXX,XX +XXX,XX @@ uint32_t riscv_load_fdt(hwaddr dram_base, uint64_t mem_size, void *fdt) * Thus, put it at an 16MB aligned address that less than fdt size from the * end of dram or 3GB whichever is lesser. */ - temp = MIN(dram_end, 3072 * MiB); + temp = (dram_base < 3072 * MiB) ? MIN(dram_end, 3072 * MiB) : dram_end; fdt_addr = QEMU_ALIGN_DOWN(temp - fdtsize, 16 * MiB); ret = fdt_pack(fdt); @@ -XXX,XX +XXX,XX @@ void riscv_setup_rom_reset_vec(MachineState *machine, RISCVHartArrayState *harts hwaddr start_addr, hwaddr rom_base, hwaddr rom_size, uint64_t kernel_entry, - uint32_t fdt_load_addr, void *fdt) + uint64_t fdt_load_addr, void *fdt) { int i; uint32_t start_addr_hi32 = 0x00000000; + uint32_t fdt_load_addr_hi32 = 0x00000000; if (!riscv_is_32bit(harts)) { start_addr_hi32 = start_addr >> 32; + fdt_load_addr_hi32 = fdt_load_addr >> 32; } /* reset vector */ uint32_t reset_vec[10] = { @@ -XXX,XX +XXX,XX @@ void riscv_setup_rom_reset_vec(MachineState *machine, RISCVHartArrayState *harts start_addr, /* start: .dword */ start_addr_hi32, fdt_load_addr, /* fdt_laddr: .dword */ - 0x00000000, + fdt_load_addr_hi32, /* fw_dyn: */ }; if (riscv_is_32bit(harts)) { -- 2.35.1