From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

It enables emulation of ECSPI in iMX8MM
Added SPI IRQ lines

Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/fsl-imx8mm.c         | 26 ++++++++++++++++++++++++++
 include/hw/arm/fsl-imx8mm.h |  7 +++++++
 2 files changed, 33 insertions(+)

diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
index 3632d85197..f433beeaf2 100644
--- a/hw/arm/fsl-imx8mm.c
+++ b/hw/arm/fsl-imx8mm.c
@@ -195,6 +195,11 @@ static void fsl_imx8mm_init(Object *obj)
         object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC);
     }
 
+    for (i = 0; i < FSL_IMX8MM_NUM_ECSPIS; i++) {
+        g_autofree char *name = g_strdup_printf("spi%d", i + 1);
+        object_initialize_child(obj, name, &s->spi[i], TYPE_IMX_SPI);
+    }
+
     object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST);
     object_initialize_child(obj, "pcie_phy", &s->pcie_phy,
                             TYPE_FSL_IMX8M_PCIE_PHY);
@@ -464,6 +469,26 @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
                            qdev_get_gpio_in(gicdev, usdhc_table[i].irq));
     }
 
+    /* ECSPIs */
+    for (i = 0; i < FSL_IMX8MM_NUM_ECSPIS; i++) {
+        static const struct {
+            hwaddr addr;
+            unsigned int irq;
+        } spi_table[FSL_IMX8MM_NUM_ECSPIS] = {
+            { fsl_imx8mm_memmap[FSL_IMX8MM_ECSPI1].addr, FSL_IMX8MM_ECSPI1_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_ECSPI2].addr, FSL_IMX8MM_ECSPI2_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_ECSPI3].addr, FSL_IMX8MM_ECSPI3_IRQ },
+        };
+
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->spi[i]), errp)) {
+            return;
+        }
+
+        sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0, spi_table[i].addr);
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0,
+                           qdev_get_gpio_in(gicdev, spi_table[i].irq));
+    }
+
     /* SNVS */
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->snvs), errp)) {
         return;
@@ -503,6 +528,7 @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
         case FSL_IMX8MM_GIC_DIST:
         case FSL_IMX8MM_GIC_REDIST:
         case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5:
+        case FSL_IMX8MM_ECSPI1 ... FSL_IMX8MM_ECSPI3:
         case FSL_IMX8MM_I2C1 ... FSL_IMX8MM_I2C4:
         case FSL_IMX8MM_PCIE1:
         case FSL_IMX8MM_PCIE_PHY1:
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
index d6df16e9d4..13c044412a 100644
--- a/include/hw/arm/fsl-imx8mm.h
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -21,6 +21,7 @@
 #include "hw/pci-host/designware.h"
 #include "hw/pci-host/fsl_imx8m_phy.h"
 #include "hw/sd/sdhci.h"
+#include "hw/ssi/imx_spi.h"
 #include "qom/object.h"
 #include "qemu/units.h"
 
@@ -32,6 +33,7 @@ OBJECT_DECLARE_SIMPLE_TYPE(FslImx8mmState, FSL_IMX8MM)
 
 enum FslImx8mmConfiguration {
     FSL_IMX8MM_NUM_CPUS         = 4,
+    FSL_IMX8MM_NUM_ECSPIS       = 3,
     FSL_IMX8MM_NUM_GPIOS        = 5,
     FSL_IMX8MM_NUM_I2CS         = 4,
     FSL_IMX8MM_NUM_IRQS         = 128,
@@ -48,6 +50,7 @@ struct FslImx8mmState {
     IMX8MPCCMState     ccm;
     IMX8MPAnalogState  analog;
     IMX7SNVSState      snvs;
+    IMXSPIState        spi[FSL_IMX8MM_NUM_ECSPIS];
     IMXI2CState        i2c[FSL_IMX8MM_NUM_I2CS];
     IMXSerialState     uart[FSL_IMX8MM_NUM_UARTS];
     MemoryRegion ocram;
@@ -177,6 +180,10 @@ enum FslImx8mmIrqs {
     FSL_IMX8MM_UART3_IRQ    = 28,
     FSL_IMX8MM_UART4_IRQ    = 29,
 
+    FSL_IMX8MM_ECSPI1_IRQ   = 31,
+    FSL_IMX8MM_ECSPI2_IRQ   = 32,
+    FSL_IMX8MM_ECSPI3_IRQ   = 33,
+
     FSL_IMX8MM_I2C1_IRQ     = 35,
     FSL_IMX8MM_I2C2_IRQ     = 36,
     FSL_IMX8MM_I2C3_IRQ     = 37,
-- 
2.43.0