From: Alistair Francis <alistair.francis@wdc.com> The following changes since commit c77283dd5d79149f4e7e9edd00f65416c648ee59: Merge tag 'pull-request-2025-07-02' of https://gitlab.com/thuth/qemu into staging (2025-07-03 06:01:41 -0400) are available in the Git repository at: https://github.com/alistair23/qemu.git tags/pull-riscv-to-apply-20250704 for you to fetch changes up to dc8bffc4eb0a93d3266cea1b17f8848dea5b915c: target: riscv: Add Svrsw60t59b extension support (2025-07-04 21:09:49 +1000) ---------------------------------------------------------------- Second RISC-V PR for 10.1 * sstc extension fixes * Fix zama16b order in isa_edata_arr * Profile handling fixes * Extend PMP region up to 64 * Remove capital 'Z' CPU properties * Add missing named features * Support atomic instruction fetch (Ziccif) * Add max_satp_mode from host cpu * Extend and configure PMP region count * Fix PPN field of Translation-reponse register * Use qemu_chr_fe_write_all() in DBCN_CONSOLE_WRITE_BYTE * Fix fcvt.s.bf16 NaN box checking * Avoid infinite delay of async xmit function * Device tree reg cleanups * Add Kunminghu CPU and platform * Fix missing exit TB flow for ldff_trans * Fix migration failure when aia is configured as aplic-imsic * Fix MEPC/SEPC bit masking for IALIGN * Add a property to set vill bit on reserved usage of vsetvli instruction * Add Svrsw60t59b extension support ---------------------------------------------------------------- Alexandre Ghiti (1): target: riscv: Add Svrsw60t59b extension support Anton Blanchard (1): target/riscv: Fix fcvt.s.bf16 NaN box checking Charalampos Mitrodimas (2): target/riscv: Fix MEPC/SEPC bit masking for IALIGN tests/tcg/riscv64: Add test for MEPC bit masking Daniel Henrique Barboza (9): target/riscv/cpu.c: fix zama16b order in isa_edata_arr[] target/riscv/tcg: restrict satp_mode changes in cpu_set_profile target/riscv/tcg: decouple profile enablement from user prop target/riscv: add profile->present flag target/riscv: remove capital 'Z' CPU properties target/riscv/cpu.c: add 'sdtrig' in riscv,isa target/riscv/cpu.c: add 'ssstrict' to riscv, isa target/riscv/cpu.c: do better with 'named features' doc target/riscv: use qemu_chr_fe_write_all() in DBCN_CONSOLE_WRITE_BYTE Florian Lugou (1): hw/char: sifive_uart: Avoid infinite delay of async xmit function Huang Borong (2): target/riscv: Add BOSC's Xiangshan Kunminghu CPU hw/riscv: Initial support for BOSC's Xiangshan Kunminghu FPGA prototype Jay Chang (2): target/riscv: Extend PMP region up to 64 target/riscv: Make PMP region count configurable Jim Shu (5): target/riscv: Add the checking into stimecmp write function. hw/intc: riscv_aclint: Fix mtime write for sstc extension target/riscv: Fix VSTIP bit in sstc extension. target/riscv: Enable/Disable S/VS-mode Timer when STCE bit is changed target/riscv: support atomic instruction fetch (Ziccif) Joel Stanley (12): hw/riscv/virt: Fix clint base address type hw/riscv/virt: Use setprop_sized_cells for clint hw/riscv/virt: Use setprop_sized_cells for memory hw/riscv/virt: Use setprop_sized_cells for aplic hw/riscv/virt: Use setprop_sized_cells for aclint hw/riscv/virt: Use setprop_sized_cells for plic hw/riscv/virt: Use setprop_sized_cells for virtio hw/riscv/virt: Use setprop_sized_cells for reset hw/riscv/virt: Use setprop_sized_cells for uart hw/riscv/virt: Use setprop_sized_cells for rtc hw/riscv/virt: Use setprop_sized_cells for iommu hw/riscv/virt: Use setprop_sized_cells for pcie Max Chou (1): target/riscv: rvv: Fix missing exit TB flow for ldff_trans Meng Zhuo (1): target/riscv/kvm: add max_satp_mode from host cpu Nutty Liu (1): hw/riscv/riscv-iommu: Fix PPN field of Translation-reponse register Vasilis Liaskovitis (1): target/riscv: Add a property to set vill bit on reserved usage of vsetvli instruction liu.xuemei1@zte.com.cn (1): migration: Fix migration failure when aia is configured as aplic-imsic MAINTAINERS | 7 + docs/system/riscv/xiangshan-kunminghu.rst | 39 +++++ docs/system/target-riscv.rst | 1 + configs/devices/riscv64-softmmu/default.mak | 1 + hw/riscv/riscv-iommu-bits.h | 1 + include/hw/riscv/xiangshan_kmh.h | 68 +++++++++ target/riscv/cpu-qom.h | 1 + target/riscv/cpu.h | 19 ++- target/riscv/cpu_bits.h | 63 +++++++- target/riscv/helper.h | 2 +- target/riscv/internals.h | 27 ++++ target/riscv/time_helper.h | 1 + target/riscv/cpu_cfg_fields.h.inc | 3 + hw/char/sifive_uart.c | 6 +- hw/intc/riscv_aclint.c | 5 + hw/intc/riscv_aplic.c | 12 +- hw/intc/riscv_imsic.c | 10 +- hw/riscv/riscv-iommu.c | 9 +- hw/riscv/virt.c | 66 ++++----- hw/riscv/xiangshan_kmh.c | 220 ++++++++++++++++++++++++++++ target/riscv/cpu.c | 144 +++++++++++++++--- target/riscv/cpu_helper.c | 3 +- target/riscv/csr.c | 192 +++++++++++++++++++++++- target/riscv/fpu_helper.c | 2 +- target/riscv/kvm/kvm-cpu.c | 18 ++- target/riscv/machine.c | 3 +- target/riscv/op_helper.c | 4 +- target/riscv/pmp.c | 28 ++-- target/riscv/riscv-qmp-cmds.c | 2 +- target/riscv/tcg/tcg-cpu.c | 186 +++++++++++------------ target/riscv/time_helper.c | 65 +++++++- target/riscv/translate.c | 46 ++++-- target/riscv/vector_helper.c | 12 +- target/riscv/insn_trans/trans_rvv.c.inc | 10 +- hw/riscv/Kconfig | 9 ++ hw/riscv/meson.build | 1 + tests/data/acpi/riscv64/virt/RHCT | Bin 400 -> 416 bytes tests/tcg/riscv64/Makefile.softmmu-target | 4 + tests/tcg/riscv64/test-mepc-masking.S | 73 +++++++++ 39 files changed, 1151 insertions(+), 212 deletions(-) create mode 100644 docs/system/riscv/xiangshan-kunminghu.rst create mode 100644 include/hw/riscv/xiangshan_kmh.h create mode 100644 hw/riscv/xiangshan_kmh.c create mode 100644 tests/tcg/riscv64/test-mepc-masking.S From: Jim Shu <jim.shu@sifive.com> Preparation commit to let aclint timer to use stimecmp write function. Aclint timer doesn't call sstc() predicate so we need to check inside the stimecmp write function. Signed-off-by: Jim Shu <jim.shu@sifive.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250519143518.11086-2-jim.shu@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/time_helper.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) diff --git a/target/riscv/time_helper.c b/target/riscv/time_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/time_helper.c +++ b/target/riscv/time_helper.c @@ -XXX,XX +XXX,XX @@ void riscv_timer_write_timecmp(CPURISCVState *env, QEMUTimer *timer, { uint64_t diff, ns_diff, next; RISCVAclintMTimerState *mtimer = env->rdtime_fn_arg; - uint32_t timebase_freq = mtimer->timebase_freq; - uint64_t rtc_r = env->rdtime_fn(env->rdtime_fn_arg) + delta; + uint32_t timebase_freq; + uint64_t rtc_r; + + if (!riscv_cpu_cfg(env)->ext_sstc || !env->rdtime_fn || + !env->rdtime_fn_arg || !get_field(env->menvcfg, MENVCFG_STCE)) { + /* S/VS Timer IRQ depends on sstc extension, rdtime_fn(), and STCE. */ + return; + } + + if (timer_irq == MIP_VSTIP && + (!riscv_has_ext(env, RVH) || !get_field(env->henvcfg, HENVCFG_STCE))) { + /* VS Timer IRQ also depends on RVH and henvcfg.STCE. */ + return; + } + + timebase_freq = mtimer->timebase_freq; + rtc_r = env->rdtime_fn(env->rdtime_fn_arg) + delta; if (timecmp <= rtc_r) { /* -- 2.50.0 From: Jim Shu <jim.shu@sifive.com> When changing the mtime value, the period of [s|vs]timecmp timers should also be updated, similar to the period of mtimecmp timer. The period of the stimecmp timer is the time until the next S-mode timer IRQ. The value is calculated as "stimecmp - time". [1] It is equal to "stimecmp - mtime" since the time CSR is a read-only shadow of the memory-mapped mtime register. Thus, changing mtime value will update the period of stimecmp timer. Similarly, the period of vstimecmp timer is calculated as "vstimecmp - (mtime + htimedelta)" [2], so changing mtime value will update the period of vstimecmp timer. [1] RISC-V Priv spec ch 9.1.1. Supervisor Timer (stimecmp) Register A supervisor timer interrupt becomes pending, as reflected in the STIP bit in the mip and sip registers whenever time contains a value greater than or equal to stimecmp. [2] RISC-V Priv spec ch19.2.1. Virtual Supervisor Timer (vstimecmp) Register A virtual supervisor timer interrupt becomes pending, as reflected in the VSTIP bit in the hip register, whenever (time + htimedelta), truncated to 64 bits, contains a value greater than or equal to vstimecmp Signed-off-by: Jim Shu <jim.shu@sifive.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250519143518.11086-3-jim.shu@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/intc/riscv_aclint.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/hw/intc/riscv_aclint.c b/hw/intc/riscv_aclint.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/riscv_aclint.c +++ b/hw/intc/riscv_aclint.c @@ -XXX,XX +XXX,XX @@ #include "qemu/module.h" #include "hw/sysbus.h" #include "target/riscv/cpu.h" +#include "target/riscv/time_helper.h" #include "hw/qdev-properties.h" #include "hw/intc/riscv_aclint.h" #include "qemu/timer.h" @@ -XXX,XX +XXX,XX @@ static void riscv_aclint_mtimer_write(void *opaque, hwaddr addr, riscv_aclint_mtimer_write_timecmp(mtimer, RISCV_CPU(cpu), mtimer->hartid_base + i, mtimer->timecmp[i]); + riscv_timer_write_timecmp(env, env->stimer, env->stimecmp, 0, MIP_STIP); + riscv_timer_write_timecmp(env, env->vstimer, env->vstimecmp, + env->htimedelta, MIP_VSTIP); + } return; } -- 2.50.0 From: Jim Shu <jim.shu@sifive.com> VSTIP is only writable when both [mh]envcfg.STCE is enabled, or it will revert it's defined behavior as if sstc extension is not implemented. Signed-off-by: Jim Shu <jim.shu@sifive.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250519143518.11086-4-jim.shu@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException rmw_mip64(CPURISCVState *env, int csrno, if (riscv_cpu_cfg(env)->ext_sstc && (env->priv == PRV_M) && get_field(env->menvcfg, MENVCFG_STCE)) { /* sstc extension forbids STIP & VSTIP to be writeable in mip */ - mask = mask & ~(MIP_STIP | MIP_VSTIP); + + /* STIP is not writable when menvcfg.STCE is enabled. */ + mask = mask & ~MIP_STIP; + + /* VSTIP is not writable when both [mh]envcfg.STCE are enabled. */ + if (get_field(env->henvcfg, HENVCFG_STCE)) { + mask = mask & ~MIP_VSTIP; + } } if (mask) { -- 2.50.0 From: Jim Shu <jim.shu@sifive.com> Updating STCE will enable/disable SSTC in S-mode or/and VS-mode, so we also need to update S/VS-mode Timer and S/VSTIP bits in $mip CSR. Signed-off-by: Jim Shu <jim.shu@sifive.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250519143518.11086-5-jim.shu@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/time_helper.h | 1 + target/riscv/csr.c | 46 ++++++++++++++++++++++++++++++++++++++ target/riscv/time_helper.c | 46 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 93 insertions(+) diff --git a/target/riscv/time_helper.h b/target/riscv/time_helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/time_helper.h +++ b/target/riscv/time_helper.h @@ -XXX,XX +XXX,XX @@ void riscv_timer_write_timecmp(CPURISCVState *env, QEMUTimer *timer, uint64_t timecmp, uint64_t delta, uint32_t timer_irq); +void riscv_timer_stce_changed(CPURISCVState *env, bool is_m_mode, bool enable); void riscv_timer_init(RISCVCPU *cpu); #endif diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException write_menvcfg(CPURISCVState *env, int csrno, const RISCVCPUConfig *cfg = riscv_cpu_cfg(env); uint64_t mask = MENVCFG_FIOM | MENVCFG_CBIE | MENVCFG_CBCFE | MENVCFG_CBZE | MENVCFG_CDE; + bool stce_changed = false; if (riscv_cpu_mxl(env) == MXL_RV64) { mask |= (cfg->ext_svpbmt ? MENVCFG_PBMTE : 0) | @@ -XXX,XX +XXX,XX @@ static RISCVException write_menvcfg(CPURISCVState *env, int csrno, if ((val & MENVCFG_DTE) == 0) { env->mstatus &= ~MSTATUS_SDT; } + + if (cfg->ext_sstc && + ((env->menvcfg & MENVCFG_STCE) != (val & MENVCFG_STCE))) { + stce_changed = true; + } } env->menvcfg = (env->menvcfg & ~mask) | (val & mask); + + if (stce_changed) { + riscv_timer_stce_changed(env, true, !!(val & MENVCFG_STCE)); + } + return write_henvcfg(env, CSR_HENVCFG, env->henvcfg, ra); } @@ -XXX,XX +XXX,XX @@ static RISCVException write_menvcfgh(CPURISCVState *env, int csrno, (cfg->ext_smcdeleg ? MENVCFG_CDE : 0) | (cfg->ext_ssdbltrp ? MENVCFG_DTE : 0); uint64_t valh = (uint64_t)val << 32; + bool stce_changed = false; + + if (cfg->ext_sstc && + ((env->menvcfg & MENVCFG_STCE) != (valh & MENVCFG_STCE))) { + stce_changed = true; + } if ((valh & MENVCFG_DTE) == 0) { env->mstatus &= ~MSTATUS_SDT; } env->menvcfg = (env->menvcfg & ~mask) | (valh & mask); + + if (stce_changed) { + riscv_timer_stce_changed(env, true, !!(valh & MENVCFG_STCE)); + } + return write_henvcfgh(env, CSR_HENVCFGH, env->henvcfg >> 32, ra); } @@ -XXX,XX +XXX,XX @@ static RISCVException read_henvcfg(CPURISCVState *env, int csrno, static RISCVException write_henvcfg(CPURISCVState *env, int csrno, target_ulong val, uintptr_t ra) { + const RISCVCPUConfig *cfg = riscv_cpu_cfg(env); uint64_t mask = HENVCFG_FIOM | HENVCFG_CBIE | HENVCFG_CBCFE | HENVCFG_CBZE; RISCVException ret; + bool stce_changed = false; ret = smstateen_acc_ok(env, 0, SMSTATEEN0_HSENVCFG); if (ret != RISCV_EXCP_NONE) { @@ -XXX,XX +XXX,XX @@ static RISCVException write_henvcfg(CPURISCVState *env, int csrno, get_field(val, HENVCFG_PMM) != PMM_FIELD_RESERVED) { mask |= HENVCFG_PMM; } + + if (cfg->ext_sstc && + ((env->henvcfg & HENVCFG_STCE) != (val & HENVCFG_STCE))) { + stce_changed = true; + } } env->henvcfg = val & mask; @@ -XXX,XX +XXX,XX @@ static RISCVException write_henvcfg(CPURISCVState *env, int csrno, env->vsstatus &= ~MSTATUS_SDT; } + if (stce_changed) { + riscv_timer_stce_changed(env, false, !!(val & HENVCFG_STCE)); + } + return RISCV_EXCP_NONE; } @@ -XXX,XX +XXX,XX @@ static RISCVException read_henvcfgh(CPURISCVState *env, int csrno, static RISCVException write_henvcfgh(CPURISCVState *env, int csrno, target_ulong val, uintptr_t ra) { + const RISCVCPUConfig *cfg = riscv_cpu_cfg(env); uint64_t mask = env->menvcfg & (HENVCFG_PBMTE | HENVCFG_STCE | HENVCFG_ADUE | HENVCFG_DTE); uint64_t valh = (uint64_t)val << 32; RISCVException ret; + bool stce_changed = false; ret = smstateen_acc_ok(env, 0, SMSTATEEN0_HSENVCFG); if (ret != RISCV_EXCP_NONE) { return ret; } + + if (cfg->ext_sstc && + ((env->henvcfg & HENVCFG_STCE) != (valh & HENVCFG_STCE))) { + stce_changed = true; + } + env->henvcfg = (env->henvcfg & 0xFFFFFFFF) | (valh & mask); if ((env->henvcfg & HENVCFG_DTE) == 0) { env->vsstatus &= ~MSTATUS_SDT; } + + if (stce_changed) { + riscv_timer_stce_changed(env, false, !!(val & HENVCFG_STCE)); + } + return RISCV_EXCP_NONE; } diff --git a/target/riscv/time_helper.c b/target/riscv/time_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/time_helper.c +++ b/target/riscv/time_helper.c @@ -XXX,XX +XXX,XX @@ void riscv_timer_write_timecmp(CPURISCVState *env, QEMUTimer *timer, timer_mod(timer, next); } +/* + * When disabling xenvcfg.STCE, the S/VS Timer may be disabled at the same time. + * It is safe to call this function regardless of whether the timer has been + * deleted or not. timer_del() will do nothing if the timer has already + * been deleted. + */ +static void riscv_timer_disable_timecmp(CPURISCVState *env, QEMUTimer *timer, + uint32_t timer_irq) +{ + /* Disable S-mode Timer IRQ and HW-based STIP */ + if ((timer_irq == MIP_STIP) && !get_field(env->menvcfg, MENVCFG_STCE)) { + riscv_cpu_update_mip(env, timer_irq, BOOL_TO_MASK(0)); + timer_del(timer); + return; + } + + /* Disable VS-mode Timer IRQ and HW-based VSTIP */ + if ((timer_irq == MIP_VSTIP) && + (!get_field(env->menvcfg, MENVCFG_STCE) || + !get_field(env->henvcfg, HENVCFG_STCE))) { + env->vstime_irq = 0; + riscv_cpu_update_mip(env, 0, BOOL_TO_MASK(0)); + timer_del(timer); + return; + } +} + +/* Enable or disable S/VS-mode Timer when xenvcfg.STCE is changed */ +void riscv_timer_stce_changed(CPURISCVState *env, bool is_m_mode, bool enable) +{ + if (enable) { + riscv_timer_write_timecmp(env, env->vstimer, env->vstimecmp, + env->htimedelta, MIP_VSTIP); + } else { + riscv_timer_disable_timecmp(env, env->vstimer, MIP_VSTIP); + } + + if (is_m_mode) { + if (enable) { + riscv_timer_write_timecmp(env, env->stimer, env->stimecmp, 0, MIP_STIP); + } else { + riscv_timer_disable_timecmp(env, env->stimer, MIP_STIP); + } + } +} + void riscv_timer_init(RISCVCPU *cpu) { CPURISCVState *env; -- 2.50.0 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Put it after zalrsc and before zawrs. Cc: qemu-trivial@nongnu.org Fixes: a60ce58fd9 ("target/riscv: Support Zama16b extension") Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250522113344.823294-1-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(zaamo, PRIV_VERSION_1_12_0, ext_zaamo), ISA_EXT_DATA_ENTRY(zabha, PRIV_VERSION_1_13_0, ext_zabha), ISA_EXT_DATA_ENTRY(zacas, PRIV_VERSION_1_12_0, ext_zacas), - ISA_EXT_DATA_ENTRY(zama16b, PRIV_VERSION_1_13_0, ext_zama16b), ISA_EXT_DATA_ENTRY(zalrsc, PRIV_VERSION_1_12_0, ext_zalrsc), + ISA_EXT_DATA_ENTRY(zama16b, PRIV_VERSION_1_13_0, ext_zama16b), ISA_EXT_DATA_ENTRY(zawrs, PRIV_VERSION_1_12_0, ext_zawrs), ISA_EXT_DATA_ENTRY(zfa, PRIV_VERSION_1_12_0, ext_zfa), ISA_EXT_DATA_ENTRY(zfbfmin, PRIV_VERSION_1_12_0, ext_zfbfmin), -- 2.50.0 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> We're changing 'mmu' to true regardless of whether the profile is being enabled or not, and at the same time we're changing satp_mode to profile->enabled. This will promote a situation where we'll set mmu=on without a virtual memory mode, which is a mistake. Only touch 'mmu' and satp_mode if the profile is being enabled. Suggested-by: Andrew Jones <ajones@ventanamicro.com> Fixes: 55398025e7 ("target/riscv: add satp_mode profile support") Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Björn Töpel <bjorn@rivosinc.com> Tested-by: Björn Töpel <bjorn@rivosinc.com> Message-ID: <20250528184407.1451983-2-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void cpu_set_profile(Object *obj, Visitor *v, const char *name, if (profile->enabled) { cpu->env.priv_ver = profile->priv_spec; - } #ifndef CONFIG_USER_ONLY - if (profile->satp_mode != RISCV_PROFILE_ATTR_UNUSED) { - object_property_set_bool(obj, "mmu", true, NULL); - const char *satp_prop = satp_mode_str(profile->satp_mode, - riscv_cpu_is_32bit(cpu)); - object_property_set_bool(obj, satp_prop, profile->enabled, NULL); - } + if (profile->satp_mode != RISCV_PROFILE_ATTR_UNUSED) { + object_property_set_bool(obj, "mmu", true, NULL); + const char *satp_prop = satp_mode_str(profile->satp_mode, + riscv_cpu_is_32bit(cpu)); + object_property_set_bool(obj, satp_prop, true, NULL); + } #endif + } for (i = 0; misa_bits[i] != 0; i++) { uint32_t bit = misa_bits[i]; -- 2.50.0 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> We have code in riscv_cpu_add_profiles() to enable a profile right away in case a CPU chose the profile during its cpu_init(). But we're using the user callback option to do so, setting profile->user_set. Create a new helper that does all the grunt work to enable/disable a given profile. Use this new helper in the cases where we want a CPU to be compatible to a certain profile, leaving the user callback to be used exclusively by users. Fixes: fba92a92e3 ("target/riscv: add 'rva22u64' CPU") Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Björn Töpel <bjorn@rivosinc.com> Tested-by: Björn Töpel <bjorn@rivosinc.com> Message-ID: <20250528184407.1451983-3-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 127 +++++++++++++++++++------------------ 1 file changed, 67 insertions(+), 60 deletions(-) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static bool riscv_cpu_is_generic(Object *cpu_obj) return object_dynamic_cast(cpu_obj, TYPE_RISCV_DYNAMIC_CPU) != NULL; } +static void riscv_cpu_set_profile(RISCVCPU *cpu, + RISCVCPUProfile *profile, + bool enabled) +{ + int i, ext_offset; + + if (profile->u_parent != NULL) { + riscv_cpu_set_profile(cpu, profile->u_parent, enabled); + } + + if (profile->s_parent != NULL) { + riscv_cpu_set_profile(cpu, profile->s_parent, enabled); + } + + profile->enabled = enabled; + + if (profile->enabled) { + cpu->env.priv_ver = profile->priv_spec; + +#ifndef CONFIG_USER_ONLY + if (profile->satp_mode != RISCV_PROFILE_ATTR_UNUSED) { + object_property_set_bool(OBJECT(cpu), "mmu", true, NULL); + const char *satp_prop = satp_mode_str(profile->satp_mode, + riscv_cpu_is_32bit(cpu)); + object_property_set_bool(OBJECT(cpu), satp_prop, true, NULL); + } +#endif + } + + for (i = 0; misa_bits[i] != 0; i++) { + uint32_t bit = misa_bits[i]; + + if (!(profile->misa_ext & bit)) { + continue; + } + + if (bit == RVI && !profile->enabled) { + /* + * Disabling profiles will not disable the base + * ISA RV64I. + */ + continue; + } + + cpu_misa_ext_add_user_opt(bit, profile->enabled); + riscv_cpu_write_misa_bit(cpu, bit, profile->enabled); + } + + for (i = 0; profile->ext_offsets[i] != RISCV_PROFILE_EXT_LIST_END; i++) { + ext_offset = profile->ext_offsets[i]; + + if (profile->enabled) { + if (cpu_cfg_offset_is_named_feat(ext_offset)) { + riscv_cpu_enable_named_feat(cpu, ext_offset); + } + + cpu_bump_multi_ext_priv_ver(&cpu->env, ext_offset); + } + + cpu_cfg_ext_add_user_opt(ext_offset, profile->enabled); + isa_ext_update_enabled(cpu, ext_offset, profile->enabled); + } +} + /* * We'll get here via the following path: * @@ -XXX,XX +XXX,XX @@ static void cpu_set_profile(Object *obj, Visitor *v, const char *name, RISCVCPUProfile *profile = opaque; RISCVCPU *cpu = RISCV_CPU(obj); bool value; - int i, ext_offset; if (riscv_cpu_is_vendor(obj)) { error_setg(errp, "Profile %s is not available for vendor CPUs", @@ -XXX,XX +XXX,XX @@ static void cpu_set_profile(Object *obj, Visitor *v, const char *name, } profile->user_set = true; - profile->enabled = value; - - if (profile->u_parent != NULL) { - object_property_set_bool(obj, profile->u_parent->name, - profile->enabled, NULL); - } - - if (profile->s_parent != NULL) { - object_property_set_bool(obj, profile->s_parent->name, - profile->enabled, NULL); - } - - if (profile->enabled) { - cpu->env.priv_ver = profile->priv_spec; - -#ifndef CONFIG_USER_ONLY - if (profile->satp_mode != RISCV_PROFILE_ATTR_UNUSED) { - object_property_set_bool(obj, "mmu", true, NULL); - const char *satp_prop = satp_mode_str(profile->satp_mode, - riscv_cpu_is_32bit(cpu)); - object_property_set_bool(obj, satp_prop, true, NULL); - } -#endif - } - - for (i = 0; misa_bits[i] != 0; i++) { - uint32_t bit = misa_bits[i]; - - if (!(profile->misa_ext & bit)) { - continue; - } - if (bit == RVI && !profile->enabled) { - /* - * Disabling profiles will not disable the base - * ISA RV64I. - */ - continue; - } - - cpu_misa_ext_add_user_opt(bit, profile->enabled); - riscv_cpu_write_misa_bit(cpu, bit, profile->enabled); - } - - for (i = 0; profile->ext_offsets[i] != RISCV_PROFILE_EXT_LIST_END; i++) { - ext_offset = profile->ext_offsets[i]; - - if (profile->enabled) { - if (cpu_cfg_offset_is_named_feat(ext_offset)) { - riscv_cpu_enable_named_feat(cpu, ext_offset); - } - - cpu_bump_multi_ext_priv_ver(&cpu->env, ext_offset); - } - - cpu_cfg_ext_add_user_opt(ext_offset, profile->enabled); - isa_ext_update_enabled(cpu, ext_offset, profile->enabled); - } + riscv_cpu_set_profile(cpu, profile, value); } static void cpu_get_profile(Object *obj, Visitor *v, const char *name, @@ -XXX,XX +XXX,XX @@ static void cpu_get_profile(Object *obj, Visitor *v, const char *name, static void riscv_cpu_add_profiles(Object *cpu_obj) { for (int i = 0; riscv_profiles[i] != NULL; i++) { - const RISCVCPUProfile *profile = riscv_profiles[i]; + RISCVCPUProfile *profile = riscv_profiles[i]; object_property_add(cpu_obj, profile->name, "bool", cpu_get_profile, cpu_set_profile, @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_add_profiles(Object *cpu_obj) * case. */ if (profile->enabled) { - object_property_set_bool(cpu_obj, profile->name, true, NULL); + riscv_cpu_set_profile(RISCV_CPU(cpu_obj), profile, true); } } } -- 2.50.0 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Björn reported in [1] a case where a rv64 CPU is going through the profile code path to enable satp mode. In this case,the amount of extensions on top of the rv64 CPU made it compliant with the RVA22S64 profile during the validation of CPU 0. When the subsequent CPUs were initialized the static profile object has the 'enable' flag set, enabling the profile code path for those CPUs. This happens because we are initializing and realizing each CPU before going to the next, i.e. init and realize CPU0, then init and realize CPU1 and so on. If we change any persistent state during the validation of CPU N it will interfere with the init/realization of CPU N+1. We're using the 'enabled' profile flag to do two distinct things: inform cpu_init() that we want profile extensions to be enabled, and telling QMP that a profile is currently enabled in the CPU. We want to be flexible enough to recognize profile support for all CPUs that has the extension prerequisites, but we do not want to force the profile code path if a profile wasn't set too. Add a new 'present' flag for profiles that will coexist with the 'enabled' flag. Enabling a profile means "we want to switch on all its mandatory extensions". A profile is 'present' if we asserted during validation that the CPU has the needed prerequisites. This means that the case reported by Björn now results in RVA22S64.enabled=false and RVA22S64.present=true. QMP will recognize it as a RVA22 compliant CPU and we won't force the CPU into the profile path. [1] https://lore.kernel.org/qemu-riscv/87y0usiz22.fsf@all.your.base.are.belong.to.us/ Reported-by: Björn Töpel <bjorn@kernel.org> Fixes: 2af005d610 ("target/riscv/tcg: validate profiles during finalize") Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Björn Töpel <bjorn@rivosinc.com> Tested-by: Björn Töpel <bjorn@rivosinc.com> Message-ID: <20250528184407.1451983-4-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 15 +++++++++++++++ target/riscv/riscv-qmp-cmds.c | 2 +- target/riscv/tcg/tcg-cpu.c | 11 +++-------- 3 files changed, 19 insertions(+), 9 deletions(-) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct riscv_cpu_profile { struct riscv_cpu_profile *s_parent; const char *name; uint32_t misa_ext; + /* + * The profile is enabled/disabled via command line or + * via cpu_init(). Enabling a profile will add all its + * mandatory extensions in the CPU during init(). + */ bool enabled; + /* + * The profile is present in the CPU, i.e. the current set of + * CPU extensions complies with it. A profile can be enabled + * and not present (e.g. the user disabled a mandatory extension) + * and the other way around (e.g. all mandatory extensions are + * present in a non-profile CPU). + * + * QMP uses this flag. + */ + bool present; bool user_set; int priv_spec; int satp_mode; diff --git a/target/riscv/riscv-qmp-cmds.c b/target/riscv/riscv-qmp-cmds.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/riscv-qmp-cmds.c +++ b/target/riscv/riscv-qmp-cmds.c @@ -XXX,XX +XXX,XX @@ static void riscv_obj_add_profiles_qdict(Object *obj, QDict *qdict_out) for (int i = 0; riscv_profiles[i] != NULL; i++) { profile = riscv_profiles[i]; - value = QOBJECT(qbool_from_bool(profile->enabled)); + value = QOBJECT(qbool_from_bool(profile->present)); qdict_put_obj(qdict_out, profile->name, value); } diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_check_parent_profile(RISCVCPU *cpu, RISCVCPUProfile *profile, RISCVCPUProfile *parent) { - const char *parent_name; - bool parent_enabled; - - if (!profile->enabled || !parent) { + if (!profile->present || !parent) { return; } - parent_name = parent->name; - parent_enabled = object_property_get_bool(OBJECT(cpu), parent_name, NULL); - profile->enabled = parent_enabled; + profile->present = parent->present; } static void riscv_cpu_validate_profile(RISCVCPU *cpu, @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_validate_profile(RISCVCPU *cpu, } } - profile->enabled = profile_impl; + profile->present = profile_impl; riscv_cpu_check_parent_profile(cpu, profile, profile->u_parent); riscv_cpu_check_parent_profile(cpu, profile, profile->s_parent); -- 2.50.0 From: Jay Chang <jay.chang@sifive.com> According to the RISC-V Privileged Specification (version >1.12), RV32 supports 16 CSRs (pmpcfg0–pmpcfg15) to configure 64 PMP regions (pmpaddr0–pmpaddr63). Signed-off-by: Jay Chang <jay.chang@sifive.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20250522081236.4050-2-jay.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu_bits.h | 60 +++++++++++++++++++ target/riscv/csr.c | 124 +++++++++++++++++++++++++++++++++++++++- 2 files changed, 182 insertions(+), 2 deletions(-) diff --git a/target/riscv/cpu_bits.h b/target/riscv/cpu_bits.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_bits.h +++ b/target/riscv/cpu_bits.h @@ -XXX,XX +XXX,XX @@ #define CSR_PMPCFG1 0x3a1 #define CSR_PMPCFG2 0x3a2 #define CSR_PMPCFG3 0x3a3 +#define CSR_PMPCFG4 0x3a4 +#define CSR_PMPCFG5 0x3a5 +#define CSR_PMPCFG6 0x3a6 +#define CSR_PMPCFG7 0x3a7 +#define CSR_PMPCFG8 0x3a8 +#define CSR_PMPCFG9 0x3a9 +#define CSR_PMPCFG10 0x3aa +#define CSR_PMPCFG11 0x3ab +#define CSR_PMPCFG12 0x3ac +#define CSR_PMPCFG13 0x3ad +#define CSR_PMPCFG14 0x3ae +#define CSR_PMPCFG15 0x3af #define CSR_PMPADDR0 0x3b0 #define CSR_PMPADDR1 0x3b1 #define CSR_PMPADDR2 0x3b2 @@ -XXX,XX +XXX,XX @@ #define CSR_PMPADDR13 0x3bd #define CSR_PMPADDR14 0x3be #define CSR_PMPADDR15 0x3bf +#define CSR_PMPADDR16 0x3c0 +#define CSR_PMPADDR17 0x3c1 +#define CSR_PMPADDR18 0x3c2 +#define CSR_PMPADDR19 0x3c3 +#define CSR_PMPADDR20 0x3c4 +#define CSR_PMPADDR21 0x3c5 +#define CSR_PMPADDR22 0x3c6 +#define CSR_PMPADDR23 0x3c7 +#define CSR_PMPADDR24 0x3c8 +#define CSR_PMPADDR25 0x3c9 +#define CSR_PMPADDR26 0x3ca +#define CSR_PMPADDR27 0x3cb +#define CSR_PMPADDR28 0x3cc +#define CSR_PMPADDR29 0x3cd +#define CSR_PMPADDR30 0x3ce +#define CSR_PMPADDR31 0x3cf +#define CSR_PMPADDR32 0x3d0 +#define CSR_PMPADDR33 0x3d1 +#define CSR_PMPADDR34 0x3d2 +#define CSR_PMPADDR35 0x3d3 +#define CSR_PMPADDR36 0x3d4 +#define CSR_PMPADDR37 0x3d5 +#define CSR_PMPADDR38 0x3d6 +#define CSR_PMPADDR39 0x3d7 +#define CSR_PMPADDR40 0x3d8 +#define CSR_PMPADDR41 0x3d9 +#define CSR_PMPADDR42 0x3da +#define CSR_PMPADDR43 0x3db +#define CSR_PMPADDR44 0x3dc +#define CSR_PMPADDR45 0x3dd +#define CSR_PMPADDR46 0x3de +#define CSR_PMPADDR47 0x3df +#define CSR_PMPADDR48 0x3e0 +#define CSR_PMPADDR49 0x3e1 +#define CSR_PMPADDR50 0x3e2 +#define CSR_PMPADDR51 0x3e3 +#define CSR_PMPADDR52 0x3e4 +#define CSR_PMPADDR53 0x3e5 +#define CSR_PMPADDR54 0x3e6 +#define CSR_PMPADDR55 0x3e7 +#define CSR_PMPADDR56 0x3e8 +#define CSR_PMPADDR57 0x3e9 +#define CSR_PMPADDR58 0x3ea +#define CSR_PMPADDR59 0x3eb +#define CSR_PMPADDR60 0x3ec +#define CSR_PMPADDR61 0x3ed +#define CSR_PMPADDR62 0x3ee +#define CSR_PMPADDR63 0x3ef /* RNMI */ #define CSR_MNSCRATCH 0x740 diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ riscv_csr_operations csr_ops[CSR_TABLE_SIZE] = { [CSR_PMPCFG1] = { "pmpcfg1", pmp, read_pmpcfg, write_pmpcfg }, [CSR_PMPCFG2] = { "pmpcfg2", pmp, read_pmpcfg, write_pmpcfg }, [CSR_PMPCFG3] = { "pmpcfg3", pmp, read_pmpcfg, write_pmpcfg }, + [CSR_PMPCFG4] = { "pmpcfg4", pmp, read_pmpcfg, write_pmpcfg, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPCFG5] = { "pmpcfg5", pmp, read_pmpcfg, write_pmpcfg, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPCFG6] = { "pmpcfg6", pmp, read_pmpcfg, write_pmpcfg, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPCFG7] = { "pmpcfg7", pmp, read_pmpcfg, write_pmpcfg, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPCFG8] = { "pmpcfg8", pmp, read_pmpcfg, write_pmpcfg, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPCFG9] = { "pmpcfg9", pmp, read_pmpcfg, write_pmpcfg, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPCFG10] = { "pmpcfg10", pmp, read_pmpcfg, write_pmpcfg, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPCFG11] = { "pmpcfg11", pmp, read_pmpcfg, write_pmpcfg, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPCFG12] = { "pmpcfg12", pmp, read_pmpcfg, write_pmpcfg, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPCFG13] = { "pmpcfg13", pmp, read_pmpcfg, write_pmpcfg, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPCFG14] = { "pmpcfg14", pmp, read_pmpcfg, write_pmpcfg, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPCFG15] = { "pmpcfg15", pmp, read_pmpcfg, write_pmpcfg, + .min_priv_ver = PRIV_VERSION_1_12_0 }, [CSR_PMPADDR0] = { "pmpaddr0", pmp, read_pmpaddr, write_pmpaddr }, [CSR_PMPADDR1] = { "pmpaddr1", pmp, read_pmpaddr, write_pmpaddr }, [CSR_PMPADDR2] = { "pmpaddr2", pmp, read_pmpaddr, write_pmpaddr }, @@ -XXX,XX +XXX,XX @@ riscv_csr_operations csr_ops[CSR_TABLE_SIZE] = { [CSR_PMPADDR11] = { "pmpaddr11", pmp, read_pmpaddr, write_pmpaddr }, [CSR_PMPADDR12] = { "pmpaddr12", pmp, read_pmpaddr, write_pmpaddr }, [CSR_PMPADDR13] = { "pmpaddr13", pmp, read_pmpaddr, write_pmpaddr }, - [CSR_PMPADDR14] = { "pmpaddr14", pmp, read_pmpaddr, write_pmpaddr }, - [CSR_PMPADDR15] = { "pmpaddr15", pmp, read_pmpaddr, write_pmpaddr }, + [CSR_PMPADDR14] = { "pmpaddr14", pmp, read_pmpaddr, write_pmpaddr }, + [CSR_PMPADDR15] = { "pmpaddr15", pmp, read_pmpaddr, write_pmpaddr }, + [CSR_PMPADDR16] = { "pmpaddr16", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR17] = { "pmpaddr17", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR18] = { "pmpaddr18", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR19] = { "pmpaddr19", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR20] = { "pmpaddr20", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR21] = { "pmpaddr21", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR22] = { "pmpaddr22", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR23] = { "pmpaddr23", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR24] = { "pmpaddr24", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR25] = { "pmpaddr25", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR26] = { "pmpaddr26", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR27] = { "pmpaddr27", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR28] = { "pmpaddr28", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR29] = { "pmpaddr29", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR30] = { "pmpaddr30", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR31] = { "pmpaddr31", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR32] = { "pmpaddr32", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR33] = { "pmpaddr33", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR34] = { "pmpaddr34", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR35] = { "pmpaddr35", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR36] = { "pmpaddr36", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR37] = { "pmpaddr37", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR38] = { "pmpaddr38", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR39] = { "pmpaddr39", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR40] = { "pmpaddr40", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR41] = { "pmpaddr41", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR42] = { "pmpaddr42", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR43] = { "pmpaddr43", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR44] = { "pmpaddr44", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR45] = { "pmpaddr45", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR46] = { "pmpaddr46", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR47] = { "pmpaddr47", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR48] = { "pmpaddr48", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR49] = { "pmpaddr49", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR50] = { "pmpaddr50", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR51] = { "pmpaddr51", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR52] = { "pmpaddr52", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR53] = { "pmpaddr53", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR54] = { "pmpaddr54", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR55] = { "pmpaddr55", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR56] = { "pmpaddr56", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR57] = { "pmpaddr57", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR58] = { "pmpaddr58", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR59] = { "pmpaddr59", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR60] = { "pmpaddr60", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR61] = { "pmpaddr61", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR62] = { "pmpaddr62", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR63] = { "pmpaddr63", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, /* Debug CSRs */ [CSR_TSELECT] = { "tselect", debug, read_tselect, write_tselect }, -- 2.50.0 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> These properties were deprecated in QEMU 8.2, commit 8043effd9b. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250530134608.1806922-1-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 1 - target/riscv/cpu.c | 17 ----------------- target/riscv/tcg/tcg-cpu.c | 31 +------------------------------ 3 files changed, 1 insertion(+), 48 deletions(-) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ extern const RISCVCPUMultiExtConfig riscv_cpu_extensions[]; extern const RISCVCPUMultiExtConfig riscv_cpu_vendor_exts[]; extern const RISCVCPUMultiExtConfig riscv_cpu_experimental_exts[]; extern const RISCVCPUMultiExtConfig riscv_cpu_named_features[]; -extern const RISCVCPUMultiExtConfig riscv_cpu_deprecated_exts[]; typedef struct isa_ext_data { const char *name; diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const RISCVCPUMultiExtConfig riscv_cpu_named_features[] = { { }, }; -/* Deprecated entries marked for future removal */ -const RISCVCPUMultiExtConfig riscv_cpu_deprecated_exts[] = { - MULTI_EXT_CFG_BOOL("Zifencei", ext_zifencei, true), - MULTI_EXT_CFG_BOOL("Zicsr", ext_zicsr, true), - MULTI_EXT_CFG_BOOL("Zihintntl", ext_zihintntl, true), - MULTI_EXT_CFG_BOOL("Zihintpause", ext_zihintpause, true), - MULTI_EXT_CFG_BOOL("Zawrs", ext_zawrs, true), - MULTI_EXT_CFG_BOOL("Zfa", ext_zfa, true), - MULTI_EXT_CFG_BOOL("Zfh", ext_zfh, false), - MULTI_EXT_CFG_BOOL("Zfhmin", ext_zfhmin, false), - MULTI_EXT_CFG_BOOL("Zve32f", ext_zve32f, false), - MULTI_EXT_CFG_BOOL("Zve64f", ext_zve64f, false), - MULTI_EXT_CFG_BOOL("Zve64d", ext_zve64d, false), - - { }, -}; - static void cpu_set_prop_err(RISCVCPU *cpu, const char *propname, Error **errp) { diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_add_profiles(Object *cpu_obj) } } -static bool cpu_ext_is_deprecated(const char *ext_name) -{ - return isupper(ext_name[0]); -} - -/* - * String will be allocated in the heap. Caller is responsible - * for freeing it. - */ -static char *cpu_ext_to_lower(const char *ext_name) -{ - char *ret = g_malloc0(strlen(ext_name) + 1); - - strcpy(ret, ext_name); - ret[0] = tolower(ret[0]); - - return ret; -} - static void cpu_set_multi_ext_cfg(Object *obj, Visitor *v, const char *name, void *opaque, Error **errp) { @@ -XXX,XX +XXX,XX @@ static void cpu_set_multi_ext_cfg(Object *obj, Visitor *v, const char *name, return; } - if (cpu_ext_is_deprecated(multi_ext_cfg->name)) { - g_autofree char *lower = cpu_ext_to_lower(multi_ext_cfg->name); - - warn_report("CPU property '%s' is deprecated. Please use '%s' instead", - multi_ext_cfg->name, lower); - } - cpu_cfg_ext_add_user_opt(multi_ext_cfg->offset, value); prev_val = isa_ext_is_enabled(cpu, multi_ext_cfg->offset); @@ -XXX,XX +XXX,XX @@ static void cpu_add_multi_ext_prop(Object *cpu_obj, const RISCVCPUMultiExtConfig *multi_cfg) { bool generic_cpu = riscv_cpu_is_generic(cpu_obj); - bool deprecated_ext = cpu_ext_is_deprecated(multi_cfg->name); object_property_add(cpu_obj, multi_cfg->name, "bool", cpu_get_multi_ext_cfg, cpu_set_multi_ext_cfg, NULL, (void *)multi_cfg); - if (!generic_cpu || deprecated_ext) { + if (!generic_cpu) { return; } @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_add_user_properties(Object *obj) riscv_cpu_add_multiext_prop_array(obj, riscv_cpu_vendor_exts); riscv_cpu_add_multiext_prop_array(obj, riscv_cpu_experimental_exts); - riscv_cpu_add_multiext_prop_array(obj, riscv_cpu_deprecated_exts); - riscv_cpu_add_profiles(obj); } -- 2.50.0 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> We have support for sdtrig for awhile but we are not advertising it. It is enabled by default via the 'debug' flag. Use the same flag to also advertise sdtrig. Add an exception in disable_priv_spec_isa_exts() to avoid spamming warnings for 'sdtrig' for vendor CPUs like sifive_u. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250604174329.1147549-2-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 1 + target/riscv/tcg/tcg-cpu.c | 9 +++++++++ tests/data/acpi/riscv64/virt/RHCT | Bin 400 -> 406 bytes 3 files changed, 10 insertions(+) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(zvkt, PRIV_VERSION_1_12_0, ext_zvkt), ISA_EXT_DATA_ENTRY(zhinx, PRIV_VERSION_1_12_0, ext_zhinx), ISA_EXT_DATA_ENTRY(zhinxmin, PRIV_VERSION_1_12_0, ext_zhinxmin), + ISA_EXT_DATA_ENTRY(sdtrig, PRIV_VERSION_1_12_0, debug), ISA_EXT_DATA_ENTRY(shcounterenw, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(sha, PRIV_VERSION_1_12_0, ext_sha), ISA_EXT_DATA_ENTRY(shgatpa, PRIV_VERSION_1_12_0, has_priv_1_12), diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_disable_priv_spec_isa_exts(RISCVCPU *cpu) continue; } + /* + * cpu.debug = true is marked as 'sdtrig', priv spec 1.12. + * Skip this warning since existing CPUs with older priv + * spec and debug = true will be impacted. + */ + if (!strcmp(edata->name, "sdtrig")) { + continue; + } + isa_ext_update_enabled(cpu, edata->ext_enable_offset, false); /* diff --git a/tests/data/acpi/riscv64/virt/RHCT b/tests/data/acpi/riscv64/virt/RHCT index XXXXXXX..XXXXXXX 100644 Binary files a/tests/data/acpi/riscv64/virt/RHCT and b/tests/data/acpi/riscv64/virt/RHCT differ -- 2.50.0 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> 'ssstrict' is a RVA23 profile-defined extension defined as follows: "No non-conforming extensions are present. Attempts to execute unimplemented opcodes or access unimplemented CSRs in the standard or reserved encoding spaces raises an illegal instruction exception that results in a contained trap to the supervisor-mode trap handler." In short, we need to throw an exception when accessing unimplemented CSRs or opcodes. We do that, so let's advertise it. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Message-ID: <20250529202315.1684198-3-dbarboza@ventanamicro.com> Message-ID: <20250604174329.1147549-3-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 1 + tests/data/acpi/riscv64/virt/RHCT | Bin 406 -> 416 bytes 2 files changed, 1 insertion(+) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(ssnpm, PRIV_VERSION_1_13_0, ext_ssnpm), ISA_EXT_DATA_ENTRY(sspm, PRIV_VERSION_1_13_0, ext_sspm), ISA_EXT_DATA_ENTRY(ssstateen, PRIV_VERSION_1_12_0, ext_ssstateen), + ISA_EXT_DATA_ENTRY(ssstrict, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(sstc, PRIV_VERSION_1_12_0, ext_sstc), ISA_EXT_DATA_ENTRY(sstvala, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(sstvecd, PRIV_VERSION_1_12_0, has_priv_1_12), diff --git a/tests/data/acpi/riscv64/virt/RHCT b/tests/data/acpi/riscv64/virt/RHCT index XXXXXXX..XXXXXXX 100644 Binary files a/tests/data/acpi/riscv64/virt/RHCT and b/tests/data/acpi/riscv64/virt/RHCT differ -- 2.50.0 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Most of the named features are added directly in isa_edata_arr[], some of them are also added in riscv_cpu_named_features(). There is a reason for that, and the existing docs can do better explaining it. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20250529202315.1684198-4-dbarboza@ventanamicro.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250604174329.1147549-4-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const RISCVCPUMultiExtConfig riscv_cpu_experimental_exts[] = { * 'Named features' is the name we give to extensions that we * don't want to expose to users. They are either immutable * (always enabled/disable) or they'll vary depending on - * the resulting CPU state. They have riscv,isa strings - * and priv_ver like regular extensions. + * the resulting CPU state. + * + * Some of them are always enabled depending on priv version + * of the CPU and are declared directly in isa_edata_arr[]. + * The ones listed here have special checks during finalize() + * time and require their own flags like regular extensions. + * See riscv_cpu_update_named_features() for more info. */ const RISCVCPUMultiExtConfig riscv_cpu_named_features[] = { MULTI_EXT_CFG_BOOL("zic64b", ext_zic64b, true), MULTI_EXT_CFG_BOOL("ssstateen", ext_ssstateen, true), MULTI_EXT_CFG_BOOL("sha", ext_sha, true), + + /* + * 'ziccrse' has its own flag because the KVM driver + * wants to enable/disable it on its own accord. + */ MULTI_EXT_CFG_BOOL("ziccrse", ext_ziccrse, true), { }, -- 2.50.0 From: Jim Shu <jim.shu@sifive.com> Support 4-byte atomic instruction fetch when instruction is natural aligned. Current implementation is not atomic because it loads instruction twice for first and last 2 bytes. We load 4 bytes at once to keep the atomicity. This instruction preload method only applys when instruction is 4-byte aligned. If instruction is unaligned, it could be across pages so that preload will trigger additional page fault. We encounter this issue when doing pressure test of enabling & disabling Linux kernel ftrace. Ftrace with kernel preemption requires concurrent modification and execution of instruction, so non-atomic instruction fetch will cause the race condition. We may fetch the wrong instruction which is the mixing of 2 instructions. Also, RISC-V Profile wants to provide this feature by HW. RVA20U64 Ziccif protects the atomicity of instruction fetch when it is natural aligned. This commit depends on the atomic read support of translator_ld in the commit 6a9dfe1984b0c593fb0ddb52d4e70832e6201dd6. Signed-off-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250508094838.19394-1-jim.shu@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/translate.c | 46 +++++++++++++++++++++++++++++----------- 1 file changed, 34 insertions(+), 12 deletions(-) diff --git a/target/riscv/translate.c b/target/riscv/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/translate.c +++ b/target/riscv/translate.c @@ -XXX,XX +XXX,XX @@ const RISCVDecoder decoder_table[] = { const size_t decoder_table_size = ARRAY_SIZE(decoder_table); -static void decode_opc(CPURISCVState *env, DisasContext *ctx, uint16_t opcode) +static void decode_opc(CPURISCVState *env, DisasContext *ctx) { + uint32_t opcode; + bool pc_is_4byte_align = ((ctx->base.pc_next % 4) == 0); + ctx->virt_inst_excp = false; - ctx->cur_insn_len = insn_len(opcode); + if (pc_is_4byte_align) { + /* + * Load 4 bytes at once to make instruction fetch atomically. + * + * Note: When pc is 4-byte aligned, 4-byte instruction wouldn't be + * across pages. We could preload 4 bytes instruction no matter + * real one is 2 or 4 bytes. Instruction preload wouldn't trigger + * additional page fault. + */ + opcode = translator_ldl(env, &ctx->base, ctx->base.pc_next); + } else { + /* + * For unaligned pc, instruction preload may trigger additional + * page fault so we only load 2 bytes here. + */ + opcode = (uint32_t) translator_lduw(env, &ctx->base, ctx->base.pc_next); + } + ctx->ol = ctx->xl; + + ctx->cur_insn_len = insn_len((uint16_t)opcode); /* Check for compressed insn */ if (ctx->cur_insn_len == 2) { - ctx->opcode = opcode; + ctx->opcode = (uint16_t)opcode; /* * The Zca extension is added as way to refer to instructions in the C * extension that do not include the floating-point loads and stores @@ -XXX,XX +XXX,XX @@ static void decode_opc(CPURISCVState *env, DisasContext *ctx, uint16_t opcode) return; } } else { - uint32_t opcode32 = opcode; - opcode32 = deposit32(opcode32, 16, 16, - translator_lduw(env, &ctx->base, - ctx->base.pc_next + 2)); - ctx->opcode = opcode32; + if (!pc_is_4byte_align) { + /* Load last 2 bytes of instruction here */ + opcode = deposit32(opcode, 16, 16, + translator_lduw(env, &ctx->base, + ctx->base.pc_next + 2)); + } + ctx->opcode = opcode; for (guint i = 0; i < ctx->decoders->len; ++i) { riscv_cpu_decode_fn func = g_ptr_array_index(ctx->decoders, i); - if (func(ctx, opcode32)) { + if (func(ctx, opcode)) { return; } } @@ -XXX,XX +XXX,XX @@ static void riscv_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) { DisasContext *ctx = container_of(dcbase, DisasContext, base); CPURISCVState *env = cpu_env(cpu); - uint16_t opcode16 = translator_lduw(env, &ctx->base, ctx->base.pc_next); - ctx->ol = ctx->xl; - decode_opc(env, ctx, opcode16); + decode_opc(env, ctx); ctx->base.pc_next += ctx->cur_insn_len; /* -- 2.50.0 From: Meng Zhuo <mengzhuo@iscas.ac.cn> This patch adds max_satp_mode from host kvm cpu setting. Tested on: Milkv Megrez (Eswin 7700x) Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2931 Signed-off-by: Meng Zhuo <mengzhuo@iscas.ac.cn> Message-ID: <20250606034250.181707-1-mengzhuo@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/kvm/kvm-cpu.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/target/riscv/kvm/kvm-cpu.c b/target/riscv/kvm/kvm-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/kvm/kvm-cpu.c +++ b/target/riscv/kvm/kvm-cpu.c @@ -XXX,XX +XXX,XX @@ static void kvm_riscv_destroy_scratch_vcpu(KVMScratchCPU *scratch) close(scratch->kvmfd); } +static void kvm_riscv_init_max_satp_mode(RISCVCPU *cpu, KVMScratchCPU *kvmcpu) +{ + struct kvm_one_reg reg; + int ret; + + reg.id = RISCV_CONFIG_REG(satp_mode); + reg.addr = (uint64_t)&cpu->cfg.max_satp_mode; + ret = ioctl(kvmcpu->cpufd, KVM_GET_ONE_REG, &reg); + if (ret != 0) { + error_report("Unable to retrieve satp mode from host, error %d", ret); + } +} + static void kvm_riscv_init_machine_ids(RISCVCPU *cpu, KVMScratchCPU *kvmcpu) { struct kvm_one_reg reg; @@ -XXX,XX +XXX,XX @@ static void riscv_init_kvm_registers(Object *cpu_obj) kvm_riscv_init_machine_ids(cpu, &kvmcpu); kvm_riscv_init_misa_ext_mask(cpu, &kvmcpu); kvm_riscv_init_cfg(cpu, &kvmcpu); + kvm_riscv_init_max_satp_mode(cpu, &kvmcpu); kvm_riscv_destroy_scratch_vcpu(&kvmcpu); } @@ -XXX,XX +XXX,XX @@ static bool kvm_cpu_realize(CPUState *cs, Error **errp) } } - return true; + return true; } void riscv_kvm_cpu_finalize_features(RISCVCPU *cpu, Error **errp) -- 2.50.0 From: Jay Chang <jay.chang@sifive.com> Previously, the number of PMP regions was hardcoded to 16 in QEMU. This patch replaces the fixed value with a new `pmp_regions` field, allowing platforms to configure the number of PMP regions. If no specific value is provided, the default number of PMP regions remains 16 to preserve the existing behavior. A new CPU parameter num-pmp-regions has been introduced to the QEMU command line. For example: -cpu rv64, g=true, c=true, pmp=true, num-pmp-regions=8 Signed-off-by: Jay Chang <jay.chang@sifive.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250606072525.17313-3-jay.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 3 +- target/riscv/cpu_cfg_fields.h.inc | 1 + target/riscv/cpu.c | 48 +++++++++++++++++++++++++++++-- target/riscv/csr.c | 5 +++- target/riscv/machine.c | 3 +- target/riscv/pmp.c | 28 ++++++++++++------ 6 files changed, 74 insertions(+), 14 deletions(-) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ extern RISCVCPUImpliedExtsRule *riscv_multi_ext_implied_rules[]; #define MMU_USER_IDX 3 -#define MAX_RISCV_PMPS (16) +#define MAX_RISCV_PMPS (64) +#define OLD_MAX_RISCV_PMPS (16) #if !defined(CONFIG_USER_ONLY) #include "pmp.h" diff --git a/target/riscv/cpu_cfg_fields.h.inc b/target/riscv/cpu_cfg_fields.h.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_cfg_fields.h.inc +++ b/target/riscv/cpu_cfg_fields.h.inc @@ -XXX,XX +XXX,XX @@ TYPED_FIELD(uint16_t, elen, 0) TYPED_FIELD(uint16_t, cbom_blocksize, 0) TYPED_FIELD(uint16_t, cbop_blocksize, 0) TYPED_FIELD(uint16_t, cboz_blocksize, 0) +TYPED_FIELD(uint8_t, pmp_regions, 0) TYPED_FIELD(int8_t, max_satp_mode, -1) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_init(Object *obj) cpu->cfg.cbom_blocksize = 64; cpu->cfg.cbop_blocksize = 64; cpu->cfg.cboz_blocksize = 64; + cpu->cfg.pmp_regions = 16; cpu->env.vext_ver = VEXT_VERSION_1_00_0; cpu->cfg.max_satp_mode = -1; @@ -XXX,XX +XXX,XX @@ static const PropertyInfo prop_pmp = { .set = prop_pmp_set, }; +static void prop_num_pmp_regions_set(Object *obj, Visitor *v, const char *name, + void *opaque, Error **errp) +{ + RISCVCPU *cpu = RISCV_CPU(obj); + uint8_t value; + + visit_type_uint8(v, name, &value, errp); + + if (cpu->cfg.pmp_regions != value && riscv_cpu_is_vendor(obj)) { + cpu_set_prop_err(cpu, name, errp); + return; + } + + if (cpu->env.priv_ver < PRIV_VERSION_1_12_0 && value > OLD_MAX_RISCV_PMPS) { + error_setg(errp, "Number of PMP regions exceeds maximum available"); + return; + } else if (value > MAX_RISCV_PMPS) { + error_setg(errp, "Number of PMP regions exceeds maximum available"); + return; + } + + cpu_option_add_user_setting(name, value); + cpu->cfg.pmp_regions = value; +} + +static void prop_num_pmp_regions_get(Object *obj, Visitor *v, const char *name, + void *opaque, Error **errp) +{ + uint8_t value = RISCV_CPU(obj)->cfg.pmp_regions; + + visit_type_uint8(v, name, &value, errp); +} + +static const PropertyInfo prop_num_pmp_regions = { + .type = "uint8", + .description = "num-pmp-regions", + .get = prop_num_pmp_regions_get, + .set = prop_num_pmp_regions_set, +}; + static int priv_spec_from_str(const char *priv_spec_str) { int priv_version = -1; @@ -XXX,XX +XXX,XX @@ static const Property riscv_cpu_properties[] = { {.name = "mmu", .info = &prop_mmu}, {.name = "pmp", .info = &prop_pmp}, + {.name = "num-pmp-regions", .info = &prop_num_pmp_regions}, {.name = "priv_spec", .info = &prop_priv_spec}, {.name = "vext_spec", .info = &prop_vext_spec}, @@ -XXX,XX +XXX,XX @@ static const TypeInfo riscv_cpu_type_infos[] = { .cfg.max_satp_mode = VM_1_10_MBARE, .cfg.ext_zifencei = true, .cfg.ext_zicsr = true, - .cfg.pmp = true + .cfg.pmp = true, + .cfg.pmp_regions = 8 ), DEFINE_ABSTRACT_RISCV_CPU(TYPE_RISCV_CPU_SIFIVE_U, TYPE_RISCV_VENDOR_CPU, @@ -XXX,XX +XXX,XX @@ static const TypeInfo riscv_cpu_type_infos[] = { .cfg.ext_zifencei = true, .cfg.ext_zicsr = true, .cfg.mmu = true, - .cfg.pmp = true + .cfg.pmp = true, + .cfg.pmp_regions = 8 ), #if defined(TARGET_RISCV32) || \ diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException dbltrp_hmode(CPURISCVState *env, int csrno) static RISCVException pmp(CPURISCVState *env, int csrno) { if (riscv_cpu_cfg(env)->pmp) { - if (csrno <= CSR_PMPCFG3) { + int max_pmpcfg = (env->priv_ver >= PRIV_VERSION_1_12_0) ? ++ CSR_PMPCFG15 : CSR_PMPCFG3; + + if (csrno <= max_pmpcfg) { uint32_t reg_index = csrno - CSR_PMPCFG0; /* TODO: RV128 restriction check */ diff --git a/target/riscv/machine.c b/target/riscv/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/machine.c +++ b/target/riscv/machine.c @@ -XXX,XX +XXX,XX @@ static int pmp_post_load(void *opaque, int version_id) RISCVCPU *cpu = opaque; CPURISCVState *env = &cpu->env; int i; + uint8_t pmp_regions = riscv_cpu_cfg(env)->pmp_regions; - for (i = 0; i < MAX_RISCV_PMPS; i++) { + for (i = 0; i < pmp_regions; i++) { pmp_update_rule_addr(env, i); } pmp_update_rule_nums(env); diff --git a/target/riscv/pmp.c b/target/riscv/pmp.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/pmp.c +++ b/target/riscv/pmp.c @@ -XXX,XX +XXX,XX @@ uint32_t pmp_get_num_rules(CPURISCVState *env) */ static inline uint8_t pmp_read_cfg(CPURISCVState *env, uint32_t pmp_index) { - if (pmp_index < MAX_RISCV_PMPS) { + uint8_t pmp_regions = riscv_cpu_cfg(env)->pmp_regions; + + if (pmp_index < pmp_regions) { return env->pmp_state.pmp[pmp_index].cfg_reg; } @@ -XXX,XX +XXX,XX @@ static inline uint8_t pmp_read_cfg(CPURISCVState *env, uint32_t pmp_index) */ static bool pmp_write_cfg(CPURISCVState *env, uint32_t pmp_index, uint8_t val) { - if (pmp_index < MAX_RISCV_PMPS) { + uint8_t pmp_regions = riscv_cpu_cfg(env)->pmp_regions; + + if (pmp_index < pmp_regions) { if (env->pmp_state.pmp[pmp_index].cfg_reg == val) { /* no change */ return false; @@ -XXX,XX +XXX,XX @@ void pmp_update_rule_addr(CPURISCVState *env, uint32_t pmp_index) void pmp_update_rule_nums(CPURISCVState *env) { int i; + uint8_t pmp_regions = riscv_cpu_cfg(env)->pmp_regions; env->pmp_state.num_rules = 0; - for (i = 0; i < MAX_RISCV_PMPS; i++) { + for (i = 0; i < pmp_regions; i++) { const uint8_t a_field = pmp_get_a_field(env->pmp_state.pmp[i].cfg_reg); if (PMP_AMATCH_OFF != a_field) { @@ -XXX,XX +XXX,XX @@ bool pmp_hart_has_privs(CPURISCVState *env, hwaddr addr, int pmp_size = 0; hwaddr s = 0; hwaddr e = 0; + uint8_t pmp_regions = riscv_cpu_cfg(env)->pmp_regions; /* Short cut if no rules */ if (0 == pmp_get_num_rules(env)) { @@ -XXX,XX +XXX,XX @@ bool pmp_hart_has_privs(CPURISCVState *env, hwaddr addr, * 1.10 draft priv spec states there is an implicit order * from low to high */ - for (i = 0; i < MAX_RISCV_PMPS; i++) { + for (i = 0; i < pmp_regions; i++) { s = pmp_is_in_range(env, i, addr); e = pmp_is_in_range(env, i, addr + pmp_size - 1); @@ -XXX,XX +XXX,XX @@ void pmpaddr_csr_write(CPURISCVState *env, uint32_t addr_index, { trace_pmpaddr_csr_write(env->mhartid, addr_index, val); bool is_next_cfg_tor = false; + uint8_t pmp_regions = riscv_cpu_cfg(env)->pmp_regions; - if (addr_index < MAX_RISCV_PMPS) { + if (addr_index < pmp_regions) { if (env->pmp_state.pmp[addr_index].addr_reg == val) { /* no change */ return; @@ -XXX,XX +XXX,XX @@ void pmpaddr_csr_write(CPURISCVState *env, uint32_t addr_index, * In TOR mode, need to check the lock bit of the next pmp * (if there is a next). */ - if (addr_index + 1 < MAX_RISCV_PMPS) { + if (addr_index + 1 < pmp_regions) { uint8_t pmp_cfg = env->pmp_state.pmp[addr_index + 1].cfg_reg; is_next_cfg_tor = PMP_AMATCH_TOR == pmp_get_a_field(pmp_cfg); @@ -XXX,XX +XXX,XX @@ void pmpaddr_csr_write(CPURISCVState *env, uint32_t addr_index, target_ulong pmpaddr_csr_read(CPURISCVState *env, uint32_t addr_index) { target_ulong val = 0; + uint8_t pmp_regions = riscv_cpu_cfg(env)->pmp_regions; - if (addr_index < MAX_RISCV_PMPS) { + if (addr_index < pmp_regions) { val = env->pmp_state.pmp[addr_index].addr_reg; trace_pmpaddr_csr_read(env->mhartid, addr_index, val); } else { @@ -XXX,XX +XXX,XX @@ void mseccfg_csr_write(CPURISCVState *env, target_ulong val) { int i; uint64_t mask = MSECCFG_MMWP | MSECCFG_MML; + uint8_t pmp_regions = riscv_cpu_cfg(env)->pmp_regions; /* Update PMM field only if the value is valid according to Zjpm v1.0 */ if (riscv_cpu_cfg(env)->ext_smmpm && riscv_cpu_mxl(env) == MXL_RV64 && @@ -XXX,XX +XXX,XX @@ void mseccfg_csr_write(CPURISCVState *env, target_ulong val) /* RLB cannot be enabled if it's already 0 and if any regions are locked */ if (!MSECCFG_RLB_ISSET(env)) { - for (i = 0; i < MAX_RISCV_PMPS; i++) { + for (i = 0; i < pmp_regions; i++) { if (pmp_is_locked(env, i)) { val &= ~MSECCFG_RLB; break; @@ -XXX,XX +XXX,XX @@ target_ulong pmp_get_tlb_size(CPURISCVState *env, hwaddr addr) hwaddr tlb_sa = addr & ~(TARGET_PAGE_SIZE - 1); hwaddr tlb_ea = tlb_sa + TARGET_PAGE_SIZE - 1; int i; + uint8_t pmp_regions = riscv_cpu_cfg(env)->pmp_regions; /* * If PMP is not supported or there are no PMP rules, the TLB page will not @@ -XXX,XX +XXX,XX @@ target_ulong pmp_get_tlb_size(CPURISCVState *env, hwaddr addr) return TARGET_PAGE_SIZE; } - for (i = 0; i < MAX_RISCV_PMPS; i++) { + for (i = 0; i < pmp_regions; i++) { if (pmp_get_a_field(env->pmp_state.pmp[i].cfg_reg) == PMP_AMATCH_OFF) { continue; } -- 2.50.0 From: Nutty Liu <liujingqi@lanxincomputing.com> The original implementation incorrectly performed a bitwise AND operation between the PPN of iova and PPN Mask, leading to an incorrect PPN field in Translation-reponse register. The PPN of iova should be set entirely in the PPN field of Translation-reponse register. Also remove the code that was used to clear S field since this field is already zero. Signed-off-by: Nutty Liu <liujingqi@lanxincomputing.com> Reviewed-by: Tomasz Jeznach <tjeznach@rivosinc.com> Message-ID: <20250605124848.1248-1-liujingqi@lanxincomputing.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/hw/riscv/riscv-iommu.c b/hw/riscv/riscv-iommu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.c +++ b/hw/riscv/riscv-iommu.c @@ -XXX,XX +XXX,XX @@ static void riscv_iommu_process_dbg(RISCVIOMMUState *s) iova = RISCV_IOMMU_TR_RESPONSE_FAULT | (((uint64_t) fault) << 10); } else { iova = iotlb.translated_addr & ~iotlb.addr_mask; - iova >>= TARGET_PAGE_BITS; - iova &= RISCV_IOMMU_TR_RESPONSE_PPN; - - /* We do not support superpages (> 4kbs) for now */ - iova &= ~RISCV_IOMMU_TR_RESPONSE_S; + iova = set_field(0, RISCV_IOMMU_TR_RESPONSE_PPN, PPN_DOWN(iova)); } riscv_iommu_reg_set64(s, RISCV_IOMMU_REG_TR_RESPONSE, iova); } -- 2.50.0 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> The SBI spec states, for console write byte: "This is a blocking SBI call and it will only return after writing the specified byte to the debug console. It will also return, with SBI_ERR_FAILED, if there are I/O errors." Being a blocker call will either succeed writing the byte or error out, it's feasible to use the blocking qemu_chr_fe_write_all() instead of qemu_chr_fe_write(). Last but not the least, we will duck possible changes in qemu_chr_fe_write() where ret = 0 will have a 'zero byte written' semantic [1] - something that we're not ready to deal in this current state. [1] https://lore.kernel.org/qemu-devel/CAFEAcA_kEndvNtw4EHySXWwQPoGs029yAzZGGBcV=zGHaj7KUQ@mail.gmail.com/ Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20250605094456.1385105-2-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/kvm/kvm-cpu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/riscv/kvm/kvm-cpu.c b/target/riscv/kvm/kvm-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/kvm/kvm-cpu.c +++ b/target/riscv/kvm/kvm-cpu.c @@ -XXX,XX +XXX,XX @@ static void kvm_riscv_handle_sbi_dbcn(CPUState *cs, struct kvm_run *run) break; case SBI_EXT_DBCN_CONSOLE_WRITE_BYTE: ch = run->riscv_sbi.args[0]; - ret = qemu_chr_fe_write(serial_hd(0)->be, &ch, sizeof(ch)); + ret = qemu_chr_fe_write_all(serial_hd(0)->be, &ch, sizeof(ch)); if (ret < 0) { error_report("SBI_EXT_DBCN_CONSOLE_WRITE_BYTE: error when " -- 2.50.0 From: Anton Blanchard <antonb@tenstorrent.com> fcvt.s.bf16 uses the FP16 check_nanbox_h() which returns an FP16 quiet NaN. Add check_nanbox_bf16() which returns a BF16 quiet NaN. Signed-off-by: Anton Blanchard <antonb@tenstorrent.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250501114253.594887-1-antonb@tenstorrent.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/internals.h | 16 ++++++++++++++++ target/riscv/fpu_helper.c | 2 +- 2 files changed, 17 insertions(+), 1 deletion(-) diff --git a/target/riscv/internals.h b/target/riscv/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/internals.h +++ b/target/riscv/internals.h @@ -XXX,XX +XXX,XX @@ static inline float16 check_nanbox_h(CPURISCVState *env, uint64_t f) } } +static inline float16 check_nanbox_bf16(CPURISCVState *env, uint64_t f) +{ + /* Disable nanbox check when enable zfinx */ + if (env_archcpu(env)->cfg.ext_zfinx) { + return (uint16_t)f; + } + + uint64_t mask = MAKE_64BIT_MASK(16, 48); + + if (likely((f & mask) == mask)) { + return (uint16_t)f; + } else { + return 0x7FC0u; /* default qnan */ + } +} + #ifndef CONFIG_USER_ONLY /* Our implementation of SysemuCPUOps::has_work */ bool riscv_cpu_has_work(CPUState *cs); diff --git a/target/riscv/fpu_helper.c b/target/riscv/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/fpu_helper.c +++ b/target/riscv/fpu_helper.c @@ -XXX,XX +XXX,XX @@ uint64_t helper_fcvt_bf16_s(CPURISCVState *env, uint64_t rs1) uint64_t helper_fcvt_s_bf16(CPURISCVState *env, uint64_t rs1) { - float16 frs1 = check_nanbox_h(env, rs1); + float16 frs1 = check_nanbox_bf16(env, rs1); return nanbox_s(env, bfloat16_to_float32(frs1, &env->fp_status)); } -- 2.50.0 From: Florian Lugou <florian.lugou@provenrun.com> The current handler for TXFIFO writes schedules an async callback to pop characters from the queue. When software writes to TXFIFO faster than the async callback delay (100ns), the timer may be pushed back while the previous character has not be dequeued yet. This happens in particular when using -icount with small shift values. This is especially worrysome when software repetitively issues amoor.w instructions (as suggested by SiFive specification) and the FIFO is full, leading to the callback being infinitly pushed back. This commit fixes the issue by never pushing back the timer, only updating it if it is not already active. Signed-off-by: Florian Lugou <florian.lugou@provenrun.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250605101255.797162-1-florian.lugou@provenrun.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/char/sifive_uart.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/hw/char/sifive_uart.c b/hw/char/sifive_uart.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/sifive_uart.c +++ b/hw/char/sifive_uart.c @@ -XXX,XX +XXX,XX @@ static void sifive_uart_write_tx_fifo(SiFiveUARTState *s, const uint8_t *buf, s->txfifo |= SIFIVE_UART_TXFIFO_FULL; } - timer_mod(s->fifo_trigger_handle, current_time + - TX_INTERRUPT_TRIGGER_DELAY_NS); + if (!timer_pending(s->fifo_trigger_handle)) { + timer_mod(s->fifo_trigger_handle, current_time + + TX_INTERRUPT_TRIGGER_DELAY_NS); + } } static uint64_t -- 2.50.0 From: Joel Stanley <joel@jms.id.au> The address is a hardware address, so use hwaddr for consistency with the rest of the machine. Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-ID: <20250604025450.85327-2-joel@jms.id.au> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_socket_clint(RISCVVirtState *s, int cpu; g_autofree char *clint_name = NULL; g_autofree uint32_t *clint_cells = NULL; - unsigned long clint_addr; + hwaddr clint_addr; MachineState *ms = MACHINE(s); static const char * const clint_compat[2] = { "sifive,clint0", "riscv,clint0" @@ -XXX,XX +XXX,XX @@ static void create_fdt_socket_clint(RISCVVirtState *s, } clint_addr = s->memmap[VIRT_CLINT].base + - (s->memmap[VIRT_CLINT].size * socket); - clint_name = g_strdup_printf("/soc/clint@%lx", clint_addr); + s->memmap[VIRT_CLINT].size * socket; + clint_name = g_strdup_printf("/soc/clint@%"HWADDR_PRIx, clint_addr); qemu_fdt_add_subnode(ms->fdt, clint_name); qemu_fdt_setprop_string_array(ms->fdt, clint_name, "compatible", (char **)&clint_compat, -- 2.50.0 From: Joel Stanley <joel@jms.id.au> The current device tree property uses two cells for the address (and for the size), but assumes the they are less than 32 bits by hard coding the high cell to zero. Use qemu_fdt_setprop_sized_cells to do the job of splitting the upper and lower 32 bits across cells. Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-ID: <20250604025450.85327-3-joel@jms.id.au> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_socket_clint(RISCVVirtState *s, qemu_fdt_setprop_string_array(ms->fdt, clint_name, "compatible", (char **)&clint_compat, ARRAY_SIZE(clint_compat)); - qemu_fdt_setprop_cells(ms->fdt, clint_name, "reg", - 0x0, clint_addr, 0x0, s->memmap[VIRT_CLINT].size); + qemu_fdt_setprop_sized_cells(ms->fdt, clint_name, "reg", + 2, clint_addr, 2, s->memmap[VIRT_CLINT].size); qemu_fdt_setprop(ms->fdt, clint_name, "interrupts-extended", clint_cells, s->soc[socket].num_harts * sizeof(uint32_t) * 4); riscv_socket_fdt_write_id(ms, clint_name, socket); -- 2.50.0 From: Joel Stanley <joel@jms.id.au> Use qemu_fdt_setprop_sized_cells to do the job of splitting the upper and lower 32 bits across cells. Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-ID: <20250604025450.85327-4-joel@jms.id.au> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_socket_memory(RISCVVirtState *s, int socket) size = riscv_socket_mem_size(ms, socket); mem_name = g_strdup_printf("/memory@%"HWADDR_PRIx, addr); qemu_fdt_add_subnode(ms->fdt, mem_name); - qemu_fdt_setprop_cells(ms->fdt, mem_name, "reg", - addr >> 32, addr, size >> 32, size); + qemu_fdt_setprop_sized_cells(ms->fdt, mem_name, "reg", 2, addr, 2, size); qemu_fdt_setprop_string(ms->fdt, mem_name, "device_type", "memory"); riscv_socket_fdt_write_id(ms, mem_name, socket); } -- 2.50.0 From: Joel Stanley <joel@jms.id.au> The current device tree property uses two cells for the address (and for the size), but assumes the they are less than 32 bits by hard coding the high cell to zero. Use qemu_fdt_setprop_sized_cells to do the job of splitting the upper and lower 32 bits across cells. Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-ID: <20250604025450.85327-5-joel@jms.id.au> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_one_aplic(RISCVVirtState *s, int socket, qemu_fdt_setprop_cell(ms->fdt, aplic_name, "msi-parent", msi_phandle); } - qemu_fdt_setprop_cells(ms->fdt, aplic_name, "reg", - 0x0, aplic_addr, 0x0, aplic_size); + qemu_fdt_setprop_sized_cells(ms->fdt, aplic_name, "reg", + 2, aplic_addr, 2, aplic_size); qemu_fdt_setprop_cell(ms->fdt, aplic_name, "riscv,num-sources", VIRT_IRQCHIP_NUM_SOURCES); -- 2.50.0 From: Joel Stanley <joel@jms.id.au> The current device tree property uses two cells for the address (and for the size), but assumes the they are less than 32 bits by hard coding the high cell to zero. Use qemu_fdt_setprop_sized_cells to do the job of splitting the upper and lower 32 bits across cells. Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-ID: <20250604025450.85327-6-joel@jms.id.au> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_socket_aclint(RISCVVirtState *s, qemu_fdt_add_subnode(ms->fdt, name); qemu_fdt_setprop_string(ms->fdt, name, "compatible", "riscv,aclint-mswi"); - qemu_fdt_setprop_cells(ms->fdt, name, "reg", - 0x0, addr, 0x0, RISCV_ACLINT_SWI_SIZE); + qemu_fdt_setprop_sized_cells(ms->fdt, name, "reg", + 2, addr, 2, RISCV_ACLINT_SWI_SIZE); qemu_fdt_setprop(ms->fdt, name, "interrupts-extended", aclint_mswi_cells, aclint_cells_size); qemu_fdt_setprop(ms->fdt, name, "interrupt-controller", NULL, 0); @@ -XXX,XX +XXX,XX @@ static void create_fdt_socket_aclint(RISCVVirtState *s, qemu_fdt_add_subnode(ms->fdt, name); qemu_fdt_setprop_string(ms->fdt, name, "compatible", "riscv,aclint-mtimer"); - qemu_fdt_setprop_cells(ms->fdt, name, "reg", - 0x0, addr + RISCV_ACLINT_DEFAULT_MTIME, - 0x0, size - RISCV_ACLINT_DEFAULT_MTIME, - 0x0, addr + RISCV_ACLINT_DEFAULT_MTIMECMP, - 0x0, RISCV_ACLINT_DEFAULT_MTIME); + qemu_fdt_setprop_sized_cells(ms->fdt, name, "reg", + 2, addr + RISCV_ACLINT_DEFAULT_MTIME, + 2, size - RISCV_ACLINT_DEFAULT_MTIME, + 2, addr + RISCV_ACLINT_DEFAULT_MTIMECMP, + 2, RISCV_ACLINT_DEFAULT_MTIME); qemu_fdt_setprop(ms->fdt, name, "interrupts-extended", aclint_mtimer_cells, aclint_cells_size); riscv_socket_fdt_write_id(ms, name, socket); @@ -XXX,XX +XXX,XX @@ static void create_fdt_socket_aclint(RISCVVirtState *s, qemu_fdt_add_subnode(ms->fdt, name); qemu_fdt_setprop_string(ms->fdt, name, "compatible", "riscv,aclint-sswi"); - qemu_fdt_setprop_cells(ms->fdt, name, "reg", - 0x0, addr, 0x0, s->memmap[VIRT_ACLINT_SSWI].size); + qemu_fdt_setprop_sized_cells(ms->fdt, name, "reg", + 2, addr, 2, s->memmap[VIRT_ACLINT_SSWI].size); qemu_fdt_setprop(ms->fdt, name, "interrupts-extended", aclint_sswi_cells, aclint_cells_size); qemu_fdt_setprop(ms->fdt, name, "interrupt-controller", NULL, 0); -- 2.50.0 From: Joel Stanley <joel@jms.id.au> The current device tree property uses two cells for the address (and for the size), but assumes the they are less than 32 bits by hard coding the high cell to zero. Use qemu_fdt_setprop_sized_cells to do the job of splitting the upper and lower 32 bits across cells. Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-ID: <20250604025450.85327-7-joel@jms.id.au> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_socket_plic(RISCVVirtState *s, s->soc[socket].num_harts * sizeof(uint32_t) * 4); } - qemu_fdt_setprop_cells(ms->fdt, plic_name, "reg", - 0x0, plic_addr, 0x0, s->memmap[VIRT_PLIC].size); + qemu_fdt_setprop_sized_cells(ms->fdt, plic_name, "reg", + 2, plic_addr, 2, s->memmap[VIRT_PLIC].size); qemu_fdt_setprop_cell(ms->fdt, plic_name, "riscv,ndev", VIRT_IRQCHIP_NUM_SOURCES - 1); riscv_socket_fdt_write_id(ms, plic_name, socket); -- 2.50.0 From: Joel Stanley <joel@jms.id.au> The current device tree property uses two cells for the address (and for the size), but assumes the they are less than 32 bits by hard coding the high cell to zero. Use qemu_fdt_setprop_sized_cells to do the job of splitting the upper and lower 32 bits across cells. Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-ID: <20250604025450.85327-8-joel@jms.id.au> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_virtio(RISCVVirtState *s, uint32_t irq_virtio_phandle) qemu_fdt_add_subnode(ms->fdt, name); qemu_fdt_setprop_string(ms->fdt, name, "compatible", "virtio,mmio"); - qemu_fdt_setprop_cells(ms->fdt, name, "reg", - 0x0, addr, - 0x0, size); + qemu_fdt_setprop_sized_cells(ms->fdt, name, "reg", 2, addr, 2, size); qemu_fdt_setprop_cell(ms->fdt, name, "interrupt-parent", irq_virtio_phandle); if (s->aia_type == VIRT_AIA_TYPE_NONE) { -- 2.50.0 From: Joel Stanley <joel@jms.id.au> The current device tree property uses two cells for the address (and for the size), but assumes the they are less than 32 bits by hard coding the high cell to zero. Use qemu_fdt_setprop_sized_cells to do the job of splitting the upper and lower 32 bits across cells. Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-ID: <20250604025450.85327-9-joel@jms.id.au> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_reset(RISCVVirtState *s, uint32_t *phandle) qemu_fdt_setprop_string_array(ms->fdt, name, "compatible", (char **)&compat, ARRAY_SIZE(compat)); } - qemu_fdt_setprop_cells(ms->fdt, name, "reg", - 0x0, s->memmap[VIRT_TEST].base, 0x0, s->memmap[VIRT_TEST].size); + qemu_fdt_setprop_sized_cells(ms->fdt, name, "reg", + 2, s->memmap[VIRT_TEST].base, + 2, s->memmap[VIRT_TEST].size); qemu_fdt_setprop_cell(ms->fdt, name, "phandle", test_phandle); test_phandle = qemu_fdt_get_phandle(ms->fdt, name); g_free(name); -- 2.50.0 From: Joel Stanley <joel@jms.id.au> The current device tree property uses two cells for the address (and for the size), but assumes the they are less than 32 bits by hard coding the high cell to zero. Use qemu_fdt_setprop_sized_cells to do the job of splitting the upper and lower 32 bits across cells. Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-ID: <20250604025450.85327-10-joel@jms.id.au> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_uart(RISCVVirtState *s, s->memmap[VIRT_UART0].base); qemu_fdt_add_subnode(ms->fdt, name); qemu_fdt_setprop_string(ms->fdt, name, "compatible", "ns16550a"); - qemu_fdt_setprop_cells(ms->fdt, name, "reg", - 0x0, s->memmap[VIRT_UART0].base, - 0x0, s->memmap[VIRT_UART0].size); + qemu_fdt_setprop_sized_cells(ms->fdt, name, "reg", + 2, s->memmap[VIRT_UART0].base, + 2, s->memmap[VIRT_UART0].size); qemu_fdt_setprop_cell(ms->fdt, name, "clock-frequency", 3686400); qemu_fdt_setprop_cell(ms->fdt, name, "interrupt-parent", irq_mmio_phandle); if (s->aia_type == VIRT_AIA_TYPE_NONE) { -- 2.50.0 From: Joel Stanley <joel@jms.id.au> The current device tree property uses two cells for the address (and for the size), but assumes the they are less than 32 bits by hard coding the high cell to zero. Use qemu_fdt_setprop_sized_cells to do the job of splitting the upper and lower 32 bits across cells. Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-ID: <20250604025450.85327-11-joel@jms.id.au> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_rtc(RISCVVirtState *s, qemu_fdt_add_subnode(ms->fdt, name); qemu_fdt_setprop_string(ms->fdt, name, "compatible", "google,goldfish-rtc"); - qemu_fdt_setprop_cells(ms->fdt, name, "reg", - 0x0, s->memmap[VIRT_RTC].base, 0x0, s->memmap[VIRT_RTC].size); + qemu_fdt_setprop_sized_cells(ms->fdt, name, "reg", + 2, s->memmap[VIRT_RTC].base, + 2, s->memmap[VIRT_RTC].size); qemu_fdt_setprop_cell(ms->fdt, name, "interrupt-parent", irq_mmio_phandle); if (s->aia_type == VIRT_AIA_TYPE_NONE) { -- 2.50.0 From: Joel Stanley <joel@jms.id.au> The current device tree property uses two cells for the address (and for the size), but assumes the they are less than 32 bits by hard coding the high cell to zero. Use qemu_fdt_setprop_sized_cells to do the job of splitting the upper and lower 32 bits across cells. Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-ID: <20250604025450.85327-12-joel@jms.id.au> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_iommu_sys(RISCVVirtState *s, uint32_t irq_chip, qemu_fdt_setprop_cell(fdt, iommu_node, "#iommu-cells", 1); qemu_fdt_setprop_cell(fdt, iommu_node, "phandle", iommu_phandle); - qemu_fdt_setprop_cells(fdt, iommu_node, "reg", - addr >> 32, addr, size >> 32, size); + qemu_fdt_setprop_sized_cells(fdt, iommu_node, "reg", 2, addr, 2, size); qemu_fdt_setprop_cell(fdt, iommu_node, "interrupt-parent", irq_chip); qemu_fdt_setprop_cells(fdt, iommu_node, "interrupts", -- 2.50.0 From: Joel Stanley <joel@jms.id.au> The current device tree property uses two cells for the address (and for the size), but assumes the they are less than 32 bits by hard coding the high cell to zero. Use qemu_fdt_setprop_sized_cells to do the job of splitting the upper and lower 32 bits across cells. Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-ID: <20250604025450.85327-13-joel@jms.id.au> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_pcie(RISCVVirtState *s, if (s->aia_type == VIRT_AIA_TYPE_APLIC_IMSIC) { qemu_fdt_setprop_cell(ms->fdt, name, "msi-parent", msi_pcie_phandle); } - qemu_fdt_setprop_cells(ms->fdt, name, "reg", 0, - s->memmap[VIRT_PCIE_ECAM].base, 0, s->memmap[VIRT_PCIE_ECAM].size); + qemu_fdt_setprop_sized_cells(ms->fdt, name, "reg", 2, + s->memmap[VIRT_PCIE_ECAM].base, 2, s->memmap[VIRT_PCIE_ECAM].size); qemu_fdt_setprop_sized_cells(ms->fdt, name, "ranges", 1, FDT_PCI_RANGE_IOPORT, 2, 0, 2, s->memmap[VIRT_PCIE_PIO].base, 2, s->memmap[VIRT_PCIE_PIO].size, -- 2.50.0 From: Huang Borong <3543977024@qq.com> Add a CPU entry for the Xiangshan Kunminghu CPU, an open-source, high-performance RISC-V processor. More details can be found at: https://github.com/OpenXiangShan/XiangShan Note: The ISA extensions supported by the Xiangshan Kunminghu CPU are categorized based on four RISC-V specifications: Volume I: Unprivileged Architecture, Volume II: Privileged Architecture, AIA, and RVA23. The extensions within each category are organized according to the chapter order in the specifications. Signed-off-by: Yu Hu <huyu@bosc.ac.cn> Signed-off-by: Ran Wang <wangran@bosc.ac.cn> Signed-off-by: Borong Huang <3543977024@qq.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250425122212.364-1-wangran@bosc.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu-qom.h | 1 + target/riscv/cpu.c | 58 ++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 59 insertions(+) diff --git a/target/riscv/cpu-qom.h b/target/riscv/cpu-qom.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu-qom.h +++ b/target/riscv/cpu-qom.h @@ -XXX,XX +XXX,XX @@ #define TYPE_RISCV_CPU_VEYRON_V1 RISCV_CPU_TYPE_NAME("veyron-v1") #define TYPE_RISCV_CPU_TT_ASCALON RISCV_CPU_TYPE_NAME("tt-ascalon") #define TYPE_RISCV_CPU_XIANGSHAN_NANHU RISCV_CPU_TYPE_NAME("xiangshan-nanhu") +#define TYPE_RISCV_CPU_XIANGSHAN_KMH RISCV_CPU_TYPE_NAME("xiangshan-kunminghu") #define TYPE_RISCV_CPU_HOST RISCV_CPU_TYPE_NAME("host") OBJECT_DECLARE_CPU_TYPE(RISCVCPU, RISCVCPUClass, RISCV_CPU) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static const TypeInfo riscv_cpu_type_infos[] = { .cfg.max_satp_mode = VM_1_10_SV39, ), + DEFINE_RISCV_CPU(TYPE_RISCV_CPU_XIANGSHAN_KMH, TYPE_RISCV_VENDOR_CPU, + .misa_mxl_max = MXL_RV64, + .misa_ext = RVG | RVC | RVB | RVS | RVU | RVH | RVV, + .priv_spec = PRIV_VERSION_1_13_0, + /* + * The RISC-V Instruction Set Manual: Volume I + * Unprivileged Architecture + */ + .cfg.ext_zicntr = true, + .cfg.ext_zihpm = true, + .cfg.ext_zihintntl = true, + .cfg.ext_zihintpause = true, + .cfg.ext_zimop = true, + .cfg.ext_zcmop = true, + .cfg.ext_zicond = true, + .cfg.ext_zawrs = true, + .cfg.ext_zacas = true, + .cfg.ext_zfh = true, + .cfg.ext_zfa = true, + .cfg.ext_zcb = true, + .cfg.ext_zbc = true, + .cfg.ext_zvfh = true, + .cfg.ext_zkn = true, + .cfg.ext_zks = true, + .cfg.ext_zkt = true, + .cfg.ext_zvbb = true, + .cfg.ext_zvkt = true, + /* + * The RISC-V Instruction Set Manual: Volume II + * Privileged Architecture + */ + .cfg.ext_smstateen = true, + .cfg.ext_smcsrind = true, + .cfg.ext_sscsrind = true, + .cfg.ext_svnapot = true, + .cfg.ext_svpbmt = true, + .cfg.ext_svinval = true, + .cfg.ext_sstc = true, + .cfg.ext_sscofpmf = true, + .cfg.ext_ssdbltrp = true, + .cfg.ext_ssnpm = true, + .cfg.ext_smnpm = true, + .cfg.ext_smmpm = true, + .cfg.ext_sspm = true, + .cfg.ext_supm = true, + /* The RISC-V Advanced Interrupt Architecture */ + .cfg.ext_smaia = true, + .cfg.ext_ssaia = true, + /* RVA23 Profiles */ + .cfg.ext_zicbom = true, + .cfg.ext_zicbop = true, + .cfg.ext_zicboz = true, + .cfg.ext_svade = true, + .cfg.mmu = true, + .cfg.pmp = true, + .cfg.max_satp_mode = VM_1_10_SV48, + ), + #if defined(CONFIG_TCG) && !defined(CONFIG_USER_ONLY) DEFINE_RISCV_CPU(TYPE_RISCV_CPU_BASE128, TYPE_RISCV_DYNAMIC_CPU, .cfg.max_satp_mode = VM_1_10_SV57, -- 2.50.0 From: Huang Borong <3543977024@qq.com> This implementation provides emulation for the Xiangshan Kunminghu FPGA prototype platform, including support for UART, CLINT, IMSIC, and APLIC devices. More details can be found at https://github.com/OpenXiangShan/XiangShan Signed-off-by: qinshaoqing <qinshaoqing@bosc.ac.cn> Signed-off-by: Yang Wang <wangyang@bosc.ac.cn> Signed-off-by: Yu Hu <819258943@qq.com> Signed-off-by: Ran Wang <wangran@bosc.ac.cn> Signed-off-by: Borong Huang <3543977024@qq.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20250617074222.17618-1-wangran@bosc.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- MAINTAINERS | 7 + docs/system/riscv/xiangshan-kunminghu.rst | 39 ++++ docs/system/target-riscv.rst | 1 + configs/devices/riscv64-softmmu/default.mak | 1 + include/hw/riscv/xiangshan_kmh.h | 68 ++++++ hw/riscv/xiangshan_kmh.c | 220 ++++++++++++++++++++ hw/riscv/Kconfig | 9 + hw/riscv/meson.build | 1 + 8 files changed, 346 insertions(+) create mode 100644 docs/system/riscv/xiangshan-kunminghu.rst create mode 100644 include/hw/riscv/xiangshan_kmh.h create mode 100644 hw/riscv/xiangshan_kmh.c diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ S: Maintained F: hw/riscv/microblaze-v-generic.c F: docs/system/riscv/microblaze-v-generic.rst +Xiangshan Kunminghu +M: Ran Wang <wangran@bosc.ac.cn> +S: Maintained +F: docs/system/riscv/xiangshan-kunminghu.rst +F: hw/riscv/xiangshan_kmh.c +F: include/hw/riscv/xiangshan_kmh.h + RX Machines ----------- rx-gdbsim diff --git a/docs/system/riscv/xiangshan-kunminghu.rst b/docs/system/riscv/xiangshan-kunminghu.rst new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/docs/system/riscv/xiangshan-kunminghu.rst @@ -XXX,XX +XXX,XX @@ +BOSC Xiangshan Kunminghu FPGA prototype platform (``xiangshan-kunminghu``) +========================================================================== +The ``xiangshan-kunminghu`` machine is compatible with our FPGA prototype +platform. + +XiangShan is an open-source high-performance RISC-V processor project. +The third generation processor is called Kunminghu. Kunminghu is a 64-bit +RV64GCBSUHV processor core. More information can be found in our Github +repository: +https://github.com/OpenXiangShan/XiangShan + +Supported devices +----------------- +The ``xiangshan-kunminghu`` machine supports the following devices: + +* Up to 16 xiangshan-kunminghu cores +* Core Local Interruptor (CLINT) +* Incoming MSI Controller (IMSIC) +* Advanced Platform-Level Interrupt Controller (APLIC) +* 1 UART + +Boot options +------------ +The ``xiangshan-kunminghu`` machine can start using the standard ``-bios`` +functionality for loading the boot image. You need to compile and link +the firmware, kernel, and Device Tree (FDT) into a single binary file, +such as ``fw_payload.bin``. + +Running +------- +Below is an example command line for running the ``xiangshan-kunminghu`` +machine: + +.. code-block:: bash + + $ qemu-system-riscv64 -machine xiangshan-kunminghu \ + -smp 16 -m 16G \ + -bios path/to/opensbi/platform/generic/firmware/fw_payload.bin \ + -nographic diff --git a/docs/system/target-riscv.rst b/docs/system/target-riscv.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/target-riscv.rst +++ b/docs/system/target-riscv.rst @@ -XXX,XX +XXX,XX @@ undocumented; you can get a complete list by running riscv/shakti-c riscv/sifive_u riscv/virt + riscv/xiangshan-kunminghu RISC-V CPU firmware ------------------- diff --git a/configs/devices/riscv64-softmmu/default.mak b/configs/devices/riscv64-softmmu/default.mak index XXXXXXX..XXXXXXX 100644 --- a/configs/devices/riscv64-softmmu/default.mak +++ b/configs/devices/riscv64-softmmu/default.mak @@ -XXX,XX +XXX,XX @@ # CONFIG_RISCV_VIRT=n # CONFIG_MICROCHIP_PFSOC=n # CONFIG_SHAKTI_C=n +# CONFIG_XIANGSHAN_KUNMINGHU=n diff --git a/include/hw/riscv/xiangshan_kmh.h b/include/hw/riscv/xiangshan_kmh.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/riscv/xiangshan_kmh.h @@ -XXX,XX +XXX,XX @@ +/* SPDX-License-Identifier: BSD-2-Clause */ +/* + * QEMU RISC-V Board Compatible with the Xiangshan Kunminghu + * FPGA prototype platform + * + * Copyright (c) 2025 Beijing Institute of Open Source Chip (BOSC) + * + */ + +#ifndef HW_XIANGSHAN_KMH_H +#define HW_XIANGSHAN_KMH_H + +#include "hw/boards.h" +#include "hw/riscv/riscv_hart.h" + +#define XIANGSHAN_KMH_MAX_CPUS 16 + +typedef struct XiangshanKmhSoCState { + /*< private >*/ + DeviceState parent_obj; + + /*< public >*/ + RISCVHartArrayState cpus; + DeviceState *irqchip; + MemoryRegion rom; +} XiangshanKmhSoCState; + +#define TYPE_XIANGSHAN_KMH_SOC "xiangshan.kunminghu.soc" +DECLARE_INSTANCE_CHECKER(XiangshanKmhSoCState, XIANGSHAN_KMH_SOC, + TYPE_XIANGSHAN_KMH_SOC) + +typedef struct XiangshanKmhState { + /*< private >*/ + MachineState parent_obj; + + /*< public >*/ + XiangshanKmhSoCState soc; +} XiangshanKmhState; + +#define TYPE_XIANGSHAN_KMH_MACHINE MACHINE_TYPE_NAME("xiangshan-kunminghu") +DECLARE_INSTANCE_CHECKER(XiangshanKmhState, XIANGSHAN_KMH_MACHINE, + TYPE_XIANGSHAN_KMH_MACHINE) + +enum { + XIANGSHAN_KMH_ROM, + XIANGSHAN_KMH_UART0, + XIANGSHAN_KMH_CLINT, + XIANGSHAN_KMH_APLIC_M, + XIANGSHAN_KMH_APLIC_S, + XIANGSHAN_KMH_IMSIC_M, + XIANGSHAN_KMH_IMSIC_S, + XIANGSHAN_KMH_DRAM, +}; + +enum { + XIANGSHAN_KMH_UART0_IRQ = 10, +}; + +/* Indicating Timebase-freq (1MHZ) */ +#define XIANGSHAN_KMH_CLINT_TIMEBASE_FREQ 1000000 + +#define XIANGSHAN_KMH_IMSIC_NUM_IDS 255 +#define XIANGSHAN_KMH_IMSIC_NUM_GUESTS 7 +#define XIANGSHAN_KMH_IMSIC_GUEST_BITS 3 + +#define XIANGSHAN_KMH_APLIC_NUM_SOURCES 96 + +#endif diff --git a/hw/riscv/xiangshan_kmh.c b/hw/riscv/xiangshan_kmh.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/riscv/xiangshan_kmh.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU RISC-V Board Compatible with the Xiangshan Kunminghu + * FPGA prototype platform + * + * Copyright (c) 2025 Beijing Institute of Open Source Chip (BOSC) + * SPDX-License-Identifier: GPL-2.0-or-later + * + * Provides a board compatible with the Xiangshan Kunminghu + * FPGA prototype platform: + * + * 0) UART (16550A) + * 1) CLINT (Core-Local Interruptor) + * 2) IMSIC (Incoming MSI Controller) + * 3) APLIC (Advanced Platform-Level Interrupt Controller) + * + * More information can be found in our Github repository: + * https://github.com/OpenXiangShan/XiangShan + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2 or later, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "system/address-spaces.h" +#include "hw/boards.h" +#include "hw/char/serial-mm.h" +#include "hw/intc/riscv_aclint.h" +#include "hw/intc/riscv_aplic.h" +#include "hw/intc/riscv_imsic.h" +#include "hw/qdev-properties.h" +#include "hw/riscv/boot.h" +#include "hw/riscv/xiangshan_kmh.h" +#include "hw/riscv/riscv_hart.h" +#include "system/system.h" + +static const MemMapEntry xiangshan_kmh_memmap[] = { + [XIANGSHAN_KMH_ROM] = { 0x1000, 0xF000 }, + [XIANGSHAN_KMH_UART0] = { 0x310B0000, 0x10000 }, + [XIANGSHAN_KMH_CLINT] = { 0x38000000, 0x10000 }, + [XIANGSHAN_KMH_APLIC_M] = { 0x31100000, 0x4000 }, + [XIANGSHAN_KMH_APLIC_S] = { 0x31120000, 0x4000 }, + [XIANGSHAN_KMH_IMSIC_M] = { 0x3A800000, 0x10000 }, + [XIANGSHAN_KMH_IMSIC_S] = { 0x3B000000, 0x80000 }, + [XIANGSHAN_KMH_DRAM] = { 0x80000000, 0x0 }, +}; + +static DeviceState *xiangshan_kmh_create_aia(uint32_t num_harts) +{ + int i; + const MemMapEntry *memmap = xiangshan_kmh_memmap; + hwaddr addr = 0; + DeviceState *aplic_m = NULL; + + /* M-level IMSICs */ + addr = memmap[XIANGSHAN_KMH_IMSIC_M].base; + for (i = 0; i < num_harts; i++) { + riscv_imsic_create(addr + i * IMSIC_HART_SIZE(0), i, true, + 1, XIANGSHAN_KMH_IMSIC_NUM_IDS); + } + + /* S-level IMSICs */ + addr = memmap[XIANGSHAN_KMH_IMSIC_S].base; + for (i = 0; i < num_harts; i++) { + riscv_imsic_create(addr + + i * IMSIC_HART_SIZE(XIANGSHAN_KMH_IMSIC_GUEST_BITS), + i, false, 1 + XIANGSHAN_KMH_IMSIC_GUEST_BITS, + XIANGSHAN_KMH_IMSIC_NUM_IDS); + } + + /* M-level APLIC */ + aplic_m = riscv_aplic_create(memmap[XIANGSHAN_KMH_APLIC_M].base, + memmap[XIANGSHAN_KMH_APLIC_M].size, + 0, 0, XIANGSHAN_KMH_APLIC_NUM_SOURCES, + 1, true, true, NULL); + + /* S-level APLIC */ + riscv_aplic_create(memmap[XIANGSHAN_KMH_APLIC_S].base, + memmap[XIANGSHAN_KMH_APLIC_S].size, + 0, 0, XIANGSHAN_KMH_APLIC_NUM_SOURCES, + 1, true, false, aplic_m); + + return aplic_m; +} + +static void xiangshan_kmh_soc_realize(DeviceState *dev, Error **errp) +{ + MachineState *ms = MACHINE(qdev_get_machine()); + XiangshanKmhSoCState *s = XIANGSHAN_KMH_SOC(dev); + const MemMapEntry *memmap = xiangshan_kmh_memmap; + MemoryRegion *system_memory = get_system_memory(); + uint32_t num_harts = ms->smp.cpus; + + qdev_prop_set_uint32(DEVICE(&s->cpus), "num-harts", num_harts); + qdev_prop_set_uint32(DEVICE(&s->cpus), "hartid-base", 0); + qdev_prop_set_string(DEVICE(&s->cpus), "cpu-type", + TYPE_RISCV_CPU_XIANGSHAN_KMH); + sysbus_realize(SYS_BUS_DEVICE(&s->cpus), &error_fatal); + + /* AIA */ + s->irqchip = xiangshan_kmh_create_aia(num_harts); + + /* UART */ + serial_mm_init(system_memory, memmap[XIANGSHAN_KMH_UART0].base, 2, + qdev_get_gpio_in(s->irqchip, XIANGSHAN_KMH_UART0_IRQ), + 115200, serial_hd(0), DEVICE_LITTLE_ENDIAN); + + /* CLINT */ + riscv_aclint_swi_create(memmap[XIANGSHAN_KMH_CLINT].base, + 0, num_harts, false); + riscv_aclint_mtimer_create(memmap[XIANGSHAN_KMH_CLINT].base + + RISCV_ACLINT_SWI_SIZE, + RISCV_ACLINT_DEFAULT_MTIMER_SIZE, + 0, num_harts, RISCV_ACLINT_DEFAULT_MTIMECMP, + RISCV_ACLINT_DEFAULT_MTIME, + XIANGSHAN_KMH_CLINT_TIMEBASE_FREQ, true); + + /* ROM */ + memory_region_init_rom(&s->rom, OBJECT(dev), "xiangshan.kunminghu.rom", + memmap[XIANGSHAN_KMH_ROM].size, &error_fatal); + memory_region_add_subregion(system_memory, + memmap[XIANGSHAN_KMH_ROM].base, &s->rom); +} + +static void xiangshan_kmh_soc_class_init(ObjectClass *klass, const void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = xiangshan_kmh_soc_realize; + dc->user_creatable = false; +} + +static void xiangshan_kmh_soc_instance_init(Object *obj) +{ + XiangshanKmhSoCState *s = XIANGSHAN_KMH_SOC(obj); + + object_initialize_child(obj, "cpus", &s->cpus, TYPE_RISCV_HART_ARRAY); +} + +static const TypeInfo xiangshan_kmh_soc_info = { + .name = TYPE_XIANGSHAN_KMH_SOC, + .parent = TYPE_DEVICE, + .instance_size = sizeof(XiangshanKmhSoCState), + .instance_init = xiangshan_kmh_soc_instance_init, + .class_init = xiangshan_kmh_soc_class_init, +}; + +static void xiangshan_kmh_soc_register_types(void) +{ + type_register_static(&xiangshan_kmh_soc_info); +} +type_init(xiangshan_kmh_soc_register_types) + +static void xiangshan_kmh_machine_init(MachineState *machine) +{ + XiangshanKmhState *s = XIANGSHAN_KMH_MACHINE(machine); + const MemMapEntry *memmap = xiangshan_kmh_memmap; + MemoryRegion *system_memory = get_system_memory(); + hwaddr start_addr = memmap[XIANGSHAN_KMH_DRAM].base; + + /* Initialize SoC */ + object_initialize_child(OBJECT(machine), "soc", &s->soc, + TYPE_XIANGSHAN_KMH_SOC); + qdev_realize(DEVICE(&s->soc), NULL, &error_fatal); + + /* Register RAM */ + memory_region_add_subregion(system_memory, + memmap[XIANGSHAN_KMH_DRAM].base, + machine->ram); + + /* ROM reset vector */ + riscv_setup_rom_reset_vec(machine, &s->soc.cpus, + start_addr, + memmap[XIANGSHAN_KMH_ROM].base, + memmap[XIANGSHAN_KMH_ROM].size, 0, 0); + if (machine->firmware) { + riscv_load_firmware(machine->firmware, &start_addr, NULL); + } + + /* Note: dtb has been integrated into firmware(OpenSBI) when compiling */ +} + +static void xiangshan_kmh_machine_class_init(ObjectClass *klass, const void *data) +{ + MachineClass *mc = MACHINE_CLASS(klass); + static const char *const valid_cpu_types[] = { + TYPE_RISCV_CPU_XIANGSHAN_KMH, + NULL + }; + + mc->desc = "RISC-V Board compatible with the Xiangshan " \ + "Kunminghu FPGA prototype platform"; + mc->init = xiangshan_kmh_machine_init; + mc->max_cpus = XIANGSHAN_KMH_MAX_CPUS; + mc->default_cpu_type = TYPE_RISCV_CPU_XIANGSHAN_KMH; + mc->valid_cpu_types = valid_cpu_types; + mc->default_ram_id = "xiangshan.kunminghu.ram"; +} + +static const TypeInfo xiangshan_kmh_machine_info = { + .name = TYPE_XIANGSHAN_KMH_MACHINE, + .parent = TYPE_MACHINE, + .instance_size = sizeof(XiangshanKmhState), + .class_init = xiangshan_kmh_machine_class_init, +}; + +static void xiangshan_kmh_machine_register_types(void) +{ + type_register_static(&xiangshan_kmh_machine_info); +} +type_init(xiangshan_kmh_machine_register_types) diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/Kconfig +++ b/hw/riscv/Kconfig @@ -XXX,XX +XXX,XX @@ config SPIKE select HTIF select RISCV_ACLINT select SIFIVE_PLIC + +config XIANGSHAN_KUNMINGHU + bool + default y + depends on RISCV64 + select RISCV_ACLINT + select RISCV_APLIC + select RISCV_IMSIC + select SERIAL_MM diff --git a/hw/riscv/meson.build b/hw/riscv/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/meson.build +++ b/hw/riscv/meson.build @@ -XXX,XX +XXX,XX @@ riscv_ss.add(when: 'CONFIG_ACPI', if_true: files('virt-acpi-build.c')) riscv_ss.add(when: 'CONFIG_RISCV_IOMMU', if_true: files( 'riscv-iommu.c', 'riscv-iommu-pci.c', 'riscv-iommu-sys.c', 'riscv-iommu-hpm.c')) riscv_ss.add(when: 'CONFIG_MICROBLAZE_V', if_true: files('microblaze-v-generic.c')) +riscv_ss.add(when: 'CONFIG_XIANGSHAN_KUNMINGHU', if_true: files('xiangshan_kmh.c')) hw_arch += {'riscv': riscv_ss} -- 2.50.0 From: Max Chou <max.chou@sifive.com> According to the V spec, the vector fault-only-first load instructions may change the VL CSR. So the ldff_trans TCG translation function should generate the lookup_and_goto_ptr flow as the vsetvl/vsetvli translation function to make sure the vl_eq_vlmax TB flag is correct. Signed-off-by: Max Chou <max.chou@sifive.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20250627133013.443997-1-max.chou@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/insn_trans/trans_rvv.c.inc | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/target/riscv/insn_trans/trans_rvv.c.inc b/target/riscv/insn_trans/trans_rvv.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_rvv.c.inc +++ b/target/riscv/insn_trans/trans_rvv.c.inc @@ -XXX,XX +XXX,XX @@ static bool ldff_trans(uint32_t vd, uint32_t rs1, uint32_t data, fn(dest, mask, base, tcg_env, desc); finalize_rvv_inst(s); + + /* vector unit-stride fault-only-first load may modify vl CSR */ + gen_update_pc(s, s->cur_insn_len); + lookup_and_goto_ptr(s); + s->base.is_jmp = DISAS_NORETURN; + return true; } -- 2.50.0 From: "liu.xuemei1@zte.com.cn" <liu.xuemei1@zte.com.cn> Address an error in migration when aia is configured as 'aplic-imsic' in riscv kvm vm by adding riscv_aplic_state_needed() and riscv_imsic_state_needed() to determine whether the corresponding sates are needed. Previously, the fields in the vmsds of 'riscv_aplic' and 'riscv_imsic' can only be initialized under certain special conditions in commit 95a97b3fd2. However, the corresponding ses of these vmsds are inserted into the savevm_state.handlers unconditionally. This led to migration failure characterized by uninitialized fields when save vm state: qemu-system-riscv64: ../migration/vmstate.c:433: vmstate_save_state_v: Assertion 'first_elem || !n_elems || !size' failed. Fixes: 95a97b3fd2 ("target/riscv: update APLIC and IMSIC to support KVM AIA") Signed-off-by: Xuemei Liu <liu.xuemei1@zte.com.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250616150034827wuHs_ffe3Qm8cqFXT7HeW@zte.com.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/intc/riscv_aplic.c | 12 ++++++++++-- hw/intc/riscv_imsic.c | 10 ++++++++-- 2 files changed, 18 insertions(+), 4 deletions(-) diff --git a/hw/intc/riscv_aplic.c b/hw/intc/riscv_aplic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/riscv_aplic.c +++ b/hw/intc/riscv_aplic.c @@ -XXX,XX +XXX,XX @@ static const Property riscv_aplic_properties[] = { DEFINE_PROP_BOOL("mmode", RISCVAPLICState, mmode, 0), }; +static bool riscv_aplic_state_needed(void *opaque) +{ + RISCVAPLICState *aplic = opaque; + + return riscv_use_emulated_aplic(aplic->msimode); +} + static const VMStateDescription vmstate_riscv_aplic = { .name = "riscv_aplic", - .version_id = 2, - .minimum_version_id = 2, + .version_id = 3, + .minimum_version_id = 3, + .needed = riscv_aplic_state_needed, .fields = (const VMStateField[]) { VMSTATE_UINT32(domaincfg, RISCVAPLICState), VMSTATE_UINT32(mmsicfgaddr, RISCVAPLICState), diff --git a/hw/intc/riscv_imsic.c b/hw/intc/riscv_imsic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/riscv_imsic.c +++ b/hw/intc/riscv_imsic.c @@ -XXX,XX +XXX,XX @@ static const Property riscv_imsic_properties[] = { DEFINE_PROP_UINT32("num-irqs", RISCVIMSICState, num_irqs, 0), }; +static bool riscv_imsic_state_needed(void *opaque) +{ + return !kvm_irqchip_in_kernel(); +} + static const VMStateDescription vmstate_riscv_imsic = { .name = "riscv_imsic", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, + .needed = riscv_imsic_state_needed, .fields = (const VMStateField[]) { VMSTATE_VARRAY_UINT32(eidelivery, RISCVIMSICState, num_pages, 0, -- 2.50.0 From: Charalampos Mitrodimas <charmitro@posteo.net> According to the RISC-V Privileged Architecture specification, the low bit of MEPC/SEPC must always be zero. When IALIGN=32, the two low bits must be zero. This commit fixes the behavior of MEPC/SEPC CSR reads and writes, and the implicit reads by MRET/SRET instructions to properly mask the lowest bit(s) based on whether the C extension is enabled: - When C extension is enabled (IALIGN=16): mask bit 0 - When C extension is disabled (IALIGN=32): mask bits [1:0] Previously, when vectored mode bits from STVEC (which sets bit 0 for vectored mode) were written to MEPC, the bits would not be cleared correctly, causing incorrect behavior on MRET. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2855 Signed-off-by: Charalampos Mitrodimas <charmitro@posteo.net> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20250703182157.281320-2-charmitro@posteo.net> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/internals.h | 11 +++++++++++ target/riscv/csr.c | 8 ++++---- target/riscv/op_helper.c | 4 ++-- 3 files changed, 17 insertions(+), 6 deletions(-) diff --git a/target/riscv/internals.h b/target/riscv/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/internals.h +++ b/target/riscv/internals.h @@ -XXX,XX +XXX,XX @@ static inline float16 check_nanbox_bf16(CPURISCVState *env, uint64_t f) } } +static inline target_ulong get_xepc_mask(CPURISCVState *env) +{ + /* When IALIGN=32, both low bits must be zero. + * When IALIGN=16 (has C extension), only bit 0 must be zero. */ + if (riscv_has_ext(env, RVC)) { + return ~(target_ulong)1; + } else { + return ~(target_ulong)3; + } +} + #ifndef CONFIG_USER_ONLY /* Our implementation of SysemuCPUOps::has_work */ bool riscv_cpu_has_work(CPUState *cs); diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException write_mscratch(CPURISCVState *env, int csrno, static RISCVException read_mepc(CPURISCVState *env, int csrno, target_ulong *val) { - *val = env->mepc; + *val = env->mepc & get_xepc_mask(env); return RISCV_EXCP_NONE; } static RISCVException write_mepc(CPURISCVState *env, int csrno, target_ulong val, uintptr_t ra) { - env->mepc = val; + env->mepc = val & get_xepc_mask(env); return RISCV_EXCP_NONE; } @@ -XXX,XX +XXX,XX @@ static RISCVException write_sscratch(CPURISCVState *env, int csrno, static RISCVException read_sepc(CPURISCVState *env, int csrno, target_ulong *val) { - *val = env->sepc; + *val = env->sepc & get_xepc_mask(env); return RISCV_EXCP_NONE; } static RISCVException write_sepc(CPURISCVState *env, int csrno, target_ulong val, uintptr_t ra) { - env->sepc = val; + env->sepc = val & get_xepc_mask(env); return RISCV_EXCP_NONE; } diff --git a/target/riscv/op_helper.c b/target/riscv/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/op_helper.c +++ b/target/riscv/op_helper.c @@ -XXX,XX +XXX,XX @@ target_ulong helper_sret(CPURISCVState *env) riscv_raise_exception(env, RISCV_EXCP_ILLEGAL_INST, GETPC()); } - target_ulong retpc = env->sepc; + target_ulong retpc = env->sepc & get_xepc_mask(env); if (!riscv_cpu_allow_16bit_insn(&env_archcpu(env)->cfg, env->priv_ver, env->misa_ext) && (retpc & 0x3)) { @@ -XXX,XX +XXX,XX @@ static target_ulong ssdbltrp_mxret(CPURISCVState *env, target_ulong mstatus, target_ulong helper_mret(CPURISCVState *env) { - target_ulong retpc = env->mepc; + target_ulong retpc = env->mepc & get_xepc_mask(env); uint64_t mstatus = env->mstatus; target_ulong prev_priv = get_field(mstatus, MSTATUS_MPP); -- 2.50.0 From: Charalampos Mitrodimas <charmitro@posteo.net> Add a regression test to verify that MEPC properly masks the lower bits when an address with mode bits is written to it, as required by the RISC-V Privileged Architecture specification. The test sets STVEC to an address with bit 0 set (vectored mode), triggers an illegal instruction exception, copies STVEC to MEPC in the trap handler, and verifies that MEPC masks bits [1:0] correctly for IALIGN=32. Without the fix, MEPC retains the mode bits (returns non-zero/FAIL). With the fix, MEPC clears bits [1:0] (returns 0/PASS). Signed-off-by: Charalampos Mitrodimas <charmitro@posteo.net> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20250703182157.281320-3-charmitro@posteo.net> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- tests/tcg/riscv64/Makefile.softmmu-target | 4 ++ tests/tcg/riscv64/test-mepc-masking.S | 73 +++++++++++++++++++++++ 2 files changed, 77 insertions(+) create mode 100644 tests/tcg/riscv64/test-mepc-masking.S diff --git a/tests/tcg/riscv64/Makefile.softmmu-target b/tests/tcg/riscv64/Makefile.softmmu-target index XXXXXXX..XXXXXXX 100644 --- a/tests/tcg/riscv64/Makefile.softmmu-target +++ b/tests/tcg/riscv64/Makefile.softmmu-target @@ -XXX,XX +XXX,XX @@ EXTRA_RUNS += run-issue1060 run-issue1060: issue1060 $(call run-test, $<, $(QEMU) $(QEMU_OPTS)$<) +EXTRA_RUNS += run-test-mepc-masking +run-test-mepc-masking: test-mepc-masking + $(call run-test, $<, $(QEMU) $(QEMU_OPTS)$<) + # We don't currently support the multiarch system tests undefine MULTIARCH_TESTS diff --git a/tests/tcg/riscv64/test-mepc-masking.S b/tests/tcg/riscv64/test-mepc-masking.S new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/tcg/riscv64/test-mepc-masking.S @@ -XXX,XX +XXX,XX @@ +/* + * Test for MEPC masking bug fix + * + * This test verifies that MEPC properly masks the lower bits according + * to the RISC-V specification when vectored mode bits from STVEC are + * written to MEPC. + */ + + .option norvc + + .text + .global _start +_start: + /* Set up machine trap vector */ + lla t0, machine_trap_handler + csrw mtvec, t0 + + /* Set STVEC with vectored mode (mode bits = 01) */ + li t0, 0x80004001 + csrw stvec, t0 + + /* Clear medeleg to handle exceptions in M-mode */ + csrw medeleg, zero + + /* Trigger illegal instruction exception */ + .word 0xffffffff + +test_completed: + /* Exit with result in a0 */ + /* a0 = 0: success (bits [1:0] were masked) */ + /* a0 != 0: failure (some bits were not masked) */ + j _exit + +machine_trap_handler: + /* Check if illegal instruction (mcause = 2) */ + csrr t0, mcause + li t1, 2 + bne t0, t1, skip_test + + /* Test: Copy STVEC (with mode bits) to MEPC */ + csrr t0, stvec /* t0 = 0x80004001 */ + csrw mepc, t0 /* Write to MEPC */ + csrr t1, mepc /* Read back MEPC */ + + /* Check if bits [1:0] are masked (IALIGN=32 without RVC) */ + andi a0, t1, 3 /* a0 = 0 if both bits masked correctly */ + + /* Set correct return address */ + lla t0, test_completed + csrw mepc, t0 + +skip_test: + mret + +/* Exit with semihosting */ +_exit: + lla a1, semiargs + li t0, 0x20026 /* ADP_Stopped_ApplicationExit */ + sd t0, 0(a1) + sd a0, 8(a1) + li a0, 0x20 /* TARGET_SYS_EXIT_EXTENDED */ + + /* Semihosting call sequence */ + .balign 16 + slli zero, zero, 0x1f + ebreak + srai zero, zero, 0x7 + j . + + .data + .balign 8 +semiargs: + .space 16 -- 2.50.0 From: Vasilis Liaskovitis <vliaskovitis@suse.com> Usage of vsetvli instruction is reserved if VLMAX is changed when vsetvli rs1 and rd arguments are x0. In this case, if the new property is true, only the vill bit will be set. See https://github.com/riscv/riscv-isa-manual/blob/main/src/v-st-ext.adoc#avl-encoding According to the spec, the above use cases are reserved, and "Implementations may set vill in either case." Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2422 Signed-off-by: Vasilis Liaskovitis <vliaskovitis@suse.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20250618213542.22873-1-vliaskovitis@suse.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/helper.h | 2 +- target/riscv/cpu_cfg_fields.h.inc | 1 + target/riscv/cpu.c | 1 + target/riscv/vector_helper.c | 12 +++++++++++- target/riscv/insn_trans/trans_rvv.c.inc | 4 ++-- 5 files changed, 16 insertions(+), 4 deletions(-) diff --git a/target/riscv/helper.h b/target/riscv/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/helper.h +++ b/target/riscv/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_3(hyp_hsv_d, TCG_CALL_NO_WG, void, env, tl, tl) #endif /* Vector functions */ -DEF_HELPER_3(vsetvl, tl, env, tl, tl) +DEF_HELPER_4(vsetvl, tl, env, tl, tl, tl) DEF_HELPER_5(vle8_v, void, ptr, ptr, tl, env, i32) DEF_HELPER_5(vle16_v, void, ptr, ptr, tl, env, i32) DEF_HELPER_5(vle32_v, void, ptr, ptr, tl, env, i32) diff --git a/target/riscv/cpu_cfg_fields.h.inc b/target/riscv/cpu_cfg_fields.h.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_cfg_fields.h.inc +++ b/target/riscv/cpu_cfg_fields.h.inc @@ -XXX,XX +XXX,XX @@ BOOL_FIELD(ext_supm) BOOL_FIELD(rvv_ta_all_1s) BOOL_FIELD(rvv_ma_all_1s) BOOL_FIELD(rvv_vl_half_avl) +BOOL_FIELD(rvv_vsetvl_x0_vill) /* Named features */ BOOL_FIELD(ext_svade) BOOL_FIELD(ext_zic64b) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static const Property riscv_cpu_properties[] = { DEFINE_PROP_BOOL("rvv_ta_all_1s", RISCVCPU, cfg.rvv_ta_all_1s, false), DEFINE_PROP_BOOL("rvv_ma_all_1s", RISCVCPU, cfg.rvv_ma_all_1s, false), DEFINE_PROP_BOOL("rvv_vl_half_avl", RISCVCPU, cfg.rvv_vl_half_avl, false), + DEFINE_PROP_BOOL("rvv_vsetvl_x0_vill", RISCVCPU, cfg.rvv_vsetvl_x0_vill, false), /* * write_misa() is marked as experimental for now so mark diff --git a/target/riscv/vector_helper.c b/target/riscv/vector_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/vector_helper.c +++ b/target/riscv/vector_helper.c @@ -XXX,XX +XXX,XX @@ #include <math.h> target_ulong HELPER(vsetvl)(CPURISCVState *env, target_ulong s1, - target_ulong s2) + target_ulong s2, target_ulong x0) { int vlmax, vl; RISCVCPU *cpu = env_archcpu(env); @@ -XXX,XX +XXX,XX @@ target_ulong HELPER(vsetvl)(CPURISCVState *env, target_ulong s1, } else { vl = vlmax; } + + if (cpu->cfg.rvv_vsetvl_x0_vill && x0 && (env->vl != vl)) { + /* only set vill bit. */ + env->vill = 1; + env->vtype = 0; + env->vl = 0; + env->vstart = 0; + return 0; + } + env->vl = vl; env->vtype = s2; env->vstart = 0; diff --git a/target/riscv/insn_trans/trans_rvv.c.inc b/target/riscv/insn_trans/trans_rvv.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_rvv.c.inc +++ b/target/riscv/insn_trans/trans_rvv.c.inc @@ -XXX,XX +XXX,XX @@ static bool do_vsetvl(DisasContext *s, int rd, int rs1, TCGv s2) s1 = get_gpr(s, rs1, EXT_ZERO); } - gen_helper_vsetvl(dst, tcg_env, s1, s2); + gen_helper_vsetvl(dst, tcg_env, s1, s2, tcg_constant_tl((int) (rd == 0 && rs1 == 0))); gen_set_gpr(s, rd, dst); finalize_rvv_inst(s); @@ -XXX,XX +XXX,XX @@ static bool do_vsetivli(DisasContext *s, int rd, TCGv s1, TCGv s2) dst = dest_gpr(s, rd); - gen_helper_vsetvl(dst, tcg_env, s1, s2); + gen_helper_vsetvl(dst, tcg_env, s1, s2, tcg_constant_tl(0)); gen_set_gpr(s, rd, dst); finalize_rvv_inst(s); gen_update_pc(s, s->cur_insn_len); -- 2.50.0 From: Alexandre Ghiti <alexghiti@rivosinc.com> The Svrsw60t59b extension allows to free the PTE reserved bits 60 and 59 for software to use. Reviewed-by: Deepak Gupta <debug@rivosinc.com> Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Nutty Liu<liujingqi@lanxincomputing.com> Message-ID: <20250702-dev-alex-svrsw60b59b_v2-v2-1-504ddf0f8530@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu-bits.h | 1 + target/riscv/cpu_bits.h | 3 ++- target/riscv/cpu_cfg_fields.h.inc | 1 + hw/riscv/riscv-iommu.c | 3 ++- target/riscv/cpu.c | 2 ++ target/riscv/cpu_helper.c | 3 ++- target/riscv/tcg/tcg-cpu.c | 8 ++++++++ 7 files changed, 18 insertions(+), 3 deletions(-) diff --git a/hw/riscv/riscv-iommu-bits.h b/hw/riscv/riscv-iommu-bits.h index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu-bits.h +++ b/hw/riscv/riscv-iommu-bits.h @@ -XXX,XX +XXX,XX @@ struct riscv_iommu_pq_record { #define RISCV_IOMMU_CAP_SV39 BIT_ULL(9) #define RISCV_IOMMU_CAP_SV48 BIT_ULL(10) #define RISCV_IOMMU_CAP_SV57 BIT_ULL(11) +#define RISCV_IOMMU_CAP_SVRSW60T59B BIT_ULL(14) #define RISCV_IOMMU_CAP_SV32X4 BIT_ULL(16) #define RISCV_IOMMU_CAP_SV39X4 BIT_ULL(17) #define RISCV_IOMMU_CAP_SV48X4 BIT_ULL(18) diff --git a/target/riscv/cpu_bits.h b/target/riscv/cpu_bits.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_bits.h +++ b/target/riscv/cpu_bits.h @@ -XXX,XX +XXX,XX @@ typedef enum { #define PTE_SOFT 0x300 /* Reserved for Software */ #define PTE_PBMT 0x6000000000000000ULL /* Page-based memory types */ #define PTE_N 0x8000000000000000ULL /* NAPOT translation */ -#define PTE_RESERVED 0x1FC0000000000000ULL /* Reserved bits */ +#define PTE_RESERVED(svrsw60t59b) \ + (svrsw60t59b ? 0x07C0000000000000ULL : 0x1FC0000000000000ULL) /* Reserved bits */ #define PTE_ATTR (PTE_N | PTE_PBMT) /* All attributes bits */ /* Page table PPN shift amount */ diff --git a/target/riscv/cpu_cfg_fields.h.inc b/target/riscv/cpu_cfg_fields.h.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_cfg_fields.h.inc +++ b/target/riscv/cpu_cfg_fields.h.inc @@ -XXX,XX +XXX,XX @@ BOOL_FIELD(ext_svadu) BOOL_FIELD(ext_svinval) BOOL_FIELD(ext_svnapot) BOOL_FIELD(ext_svpbmt) +BOOL_FIELD(ext_svrsw60t59b) BOOL_FIELD(ext_svvptc) BOOL_FIELD(ext_svukte) BOOL_FIELD(ext_zdinx) diff --git a/hw/riscv/riscv-iommu.c b/hw/riscv/riscv-iommu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.c +++ b/hw/riscv/riscv-iommu.c @@ -XXX,XX +XXX,XX @@ static void riscv_iommu_realize(DeviceState *dev, Error **errp) } if (s->enable_g_stage) { s->cap |= RISCV_IOMMU_CAP_SV32X4 | RISCV_IOMMU_CAP_SV39X4 | - RISCV_IOMMU_CAP_SV48X4 | RISCV_IOMMU_CAP_SV57X4; + RISCV_IOMMU_CAP_SV48X4 | RISCV_IOMMU_CAP_SV57X4 | + RISCV_IOMMU_CAP_SVRSW60T59B; } if (s->hpm_cntrs > 0) { diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(svinval, PRIV_VERSION_1_12_0, ext_svinval), ISA_EXT_DATA_ENTRY(svnapot, PRIV_VERSION_1_12_0, ext_svnapot), ISA_EXT_DATA_ENTRY(svpbmt, PRIV_VERSION_1_12_0, ext_svpbmt), + ISA_EXT_DATA_ENTRY(svrsw60t59b, PRIV_VERSION_1_13_0, ext_svrsw60t59b), ISA_EXT_DATA_ENTRY(svukte, PRIV_VERSION_1_13_0, ext_svukte), ISA_EXT_DATA_ENTRY(svvptc, PRIV_VERSION_1_13_0, ext_svvptc), ISA_EXT_DATA_ENTRY(xtheadba, PRIV_VERSION_1_11_0, ext_xtheadba), @@ -XXX,XX +XXX,XX @@ const RISCVCPUMultiExtConfig riscv_cpu_extensions[] = { MULTI_EXT_CFG_BOOL("svinval", ext_svinval, false), MULTI_EXT_CFG_BOOL("svnapot", ext_svnapot, false), MULTI_EXT_CFG_BOOL("svpbmt", ext_svpbmt, false), + MULTI_EXT_CFG_BOOL("svrsw60t59b", ext_svrsw60t59b, false), MULTI_EXT_CFG_BOOL("svvptc", ext_svvptc, true), MULTI_EXT_CFG_BOOL("zicntr", ext_zicntr, true), diff --git a/target/riscv/cpu_helper.c b/target/riscv/cpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_helper.c +++ b/target/riscv/cpu_helper.c @@ -XXX,XX +XXX,XX @@ static int get_physical_address(CPURISCVState *env, hwaddr *physical, bool svade = riscv_cpu_cfg(env)->ext_svade; bool svadu = riscv_cpu_cfg(env)->ext_svadu; bool adue = svadu ? env->menvcfg & MENVCFG_ADUE : !svade; + bool svrsw60t59b = riscv_cpu_cfg(env)->ext_svrsw60t59b; if (first_stage && two_stage && env->virt_enabled) { pbmte = pbmte && (env->henvcfg & HENVCFG_PBMTE); @@ -XXX,XX +XXX,XX @@ static int get_physical_address(CPURISCVState *env, hwaddr *physical, if (riscv_cpu_sxl(env) == MXL_RV32) { ppn = pte >> PTE_PPN_SHIFT; } else { - if (pte & PTE_RESERVED) { + if (pte & PTE_RESERVED(svrsw60t59b)) { qemu_log_mask(LOG_GUEST_ERROR, "%s: reserved bits set in PTE: " "addr: 0x%" HWADDR_PRIx " pte: 0x" TARGET_FMT_lx "\n", __func__, pte_addr, pte); diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ void riscv_cpu_validate_set_extensions(RISCVCPU *cpu, Error **errp) cpu->cfg.ext_ssctr = false; } + if (cpu->cfg.ext_svrsw60t59b && + (!cpu->cfg.mmu || mcc->def->misa_mxl_max == MXL_RV32)) { + error_setg(errp, "svrsw60t59b is not supported on RV32 and MMU-less platforms"); + return; + } + /* * Disable isa extensions based on priv spec after we * validated and set everything we need. @@ -XXX,XX +XXX,XX @@ static void riscv_init_max_cpu_extensions(Object *obj) if (env->misa_mxl != MXL_RV32) { isa_ext_update_enabled(cpu, CPU_CFG_OFFSET(ext_zcf), false); + } else { + isa_ext_update_enabled(cpu, CPU_CFG_OFFSET(ext_svrsw60t59b), false); } /* -- 2.50.0 The following changes since commit 718780d20470c66a3a36d036b29148d5809dc855: Merge tag 'pull-nvme-20241001' of https://gitlab.com/birkelund/qemu into staging (2024-10-01 11:34:07 +0100) are available in the Git repository at: https://github.com/alistair23/qemu.git tags/pull-riscv-to-apply-20241002 for you to fetch changes up to 74b493244d0624afed22606e76fc7fca62777401: bsd-user: Add RISC-V 64-bit Target Configuration and Debug XML Files (2024-10-02 15:11:52 +1000) ---------------------------------------------------------------- RISC-V PR for 9.2 * Add a property to set vl to ceil(AVL/2) * Enable numamem testing for RISC-V * Consider MISA bit choice in implied rule * Fix the za64rs priv spec requirements * Enable Bit Manip for OpenTitan Ibex CPU * Fix the group bit setting of AIA with KVM * Stop timer with infinite timecmp * Add 'fcsr' register to QEMU log as a part of F extension * Fix riscv64 build on musl libc * Add preliminary textra trigger CSR functions * RISC-V bsd-user support * Respect firmware ELF entry point * Add Svvptc extension support * Fix masking of rv32 physical address * Fix linking problem with semihosting disabled * Fix IMSIC interrupt state updates ---------------------------------------------------------------- Alexandre Ghiti (1): target: riscv: Add Svvptc extension support Alistair Francis (1): target: riscv: Enable Bit Manip for OpenTitan Ibex CPU Alvin Chang (2): target/riscv: Preliminary textra trigger CSR writting support target/riscv: Add textra matching condition for the triggers Andrew Jones (3): target/riscv/kvm: Fix the group bit setting of AIA target/riscv: Stop timer with infinite timecmp target/riscv32: Fix masking of physical address Daniel Henrique Barboza (1): target/riscv/tcg/tcg-cpu.c: consider MISA bit choice in implied rule Haibo Xu (3): tests/acpi: Add empty ACPI SRAT data file for RISC-V tests/qtest/bios-tables-test.c: Enable numamem testing for RISC-V tests/acpi: Add expected ACPI SRAT AML file for RISC-V Jason Chien (1): target/riscv: Add a property to set vl to ceil(AVL/2) Maria Klauchek (1): target/riscv/cpu.c: Add 'fcsr' register to QEMU log as a part of F extension Mark Corbin (15): bsd-user: Implement RISC-V CPU initialization and main loop bsd-user: Add RISC-V CPU execution loop and syscall handling bsd-user: Implement RISC-V CPU register cloning and reset functions bsd-user: Implement RISC-V TLS register setup bsd-user: Add RISC-V ELF definitions and hardware capability detection bsd-user: Define RISC-V register structures and register copying bsd-user: Add RISC-V signal trampoline setup function bsd-user: Implement RISC-V sysarch system call emulation bsd-user: Add RISC-V thread setup and initialization support bsd-user: Define RISC-V VM parameters and helper functions bsd-user: Define RISC-V system call structures and constants bsd-user: Define RISC-V signal handling structures and constants bsd-user: Implement RISC-V signal trampoline setup functions bsd-user: Implement 'get_mcontext' for RISC-V bsd-user: Implement set_mcontext and get_ucontext_sigreturn for RISCV Milan P. Stanić (1): util/util/cpuinfo-riscv.c: fix riscv64 build on musl libc Samuel Holland (1): hw/riscv: Respect firmware ELF entry point Thomas Huth (1): target/riscv/cpu_helper: Fix linking problem with semihosting disabled Tomasz Jeznach (1): hw/intc: riscv-imsic: Fix interrupt state updates. Vladimir Isaev (1): target/riscv: fix za64rs enabling Warner Losh (2): bsd-user: Add generic RISC-V64 target definitions bsd-user: Add RISC-V 64-bit Target Configuration and Debug XML Files configs/targets/riscv64-bsd-user.mak | 4 + bsd-user/riscv/target.h | 20 ++++ bsd-user/riscv/target_arch.h | 27 +++++ bsd-user/riscv/target_arch_cpu.h | 148 ++++++++++++++++++++++++++ bsd-user/riscv/target_arch_elf.h | 42 ++++++++ bsd-user/riscv/target_arch_reg.h | 88 ++++++++++++++++ bsd-user/riscv/target_arch_signal.h | 75 +++++++++++++ bsd-user/riscv/target_arch_sigtramp.h | 41 +++++++ bsd-user/riscv/target_arch_sysarch.h | 41 +++++++ bsd-user/riscv/target_arch_thread.h | 47 +++++++++ bsd-user/riscv/target_arch_vmparam.h | 53 ++++++++++ bsd-user/riscv/target_syscall.h | 38 +++++++ include/hw/riscv/boot.h | 4 +- target/riscv/cpu_bits.h | 10 ++ target/riscv/cpu_cfg.h | 2 + target/riscv/debug.h | 3 + bsd-user/riscv/signal.c | 170 ++++++++++++++++++++++++++++++ bsd-user/riscv/target_arch_cpu.c | 29 +++++ hw/intc/riscv_imsic.c | 50 +++++---- hw/riscv/boot.c | 11 +- hw/riscv/microchip_pfsoc.c | 2 +- hw/riscv/opentitan.c | 3 +- hw/riscv/shakti_c.c | 13 ++- hw/riscv/sifive_u.c | 4 +- hw/riscv/spike.c | 5 +- hw/riscv/virt.c | 4 +- target/riscv/cpu.c | 16 ++- target/riscv/cpu_helper.c | 8 +- target/riscv/debug.c | 114 ++++++++++++++++++-- target/riscv/kvm/kvm-cpu.c | 4 +- target/riscv/tcg/tcg-cpu.c | 13 ++- target/riscv/time_helper.c | 1 + target/riscv/vector_helper.c | 2 + tests/qtest/bios-tables-test.c | 28 +++++ util/cpuinfo-riscv.c | 1 + target/riscv/Kconfig | 4 +- tests/data/acpi/riscv64/virt/SRAT.numamem | Bin 0 -> 108 bytes 37 files changed, 1068 insertions(+), 57 deletions(-) create mode 100644 configs/targets/riscv64-bsd-user.mak create mode 100644 bsd-user/riscv/target.h create mode 100644 bsd-user/riscv/target_arch.h create mode 100644 bsd-user/riscv/target_arch_cpu.h create mode 100644 bsd-user/riscv/target_arch_elf.h create mode 100644 bsd-user/riscv/target_arch_reg.h create mode 100644 bsd-user/riscv/target_arch_signal.h create mode 100644 bsd-user/riscv/target_arch_sigtramp.h create mode 100644 bsd-user/riscv/target_arch_sysarch.h create mode 100644 bsd-user/riscv/target_arch_thread.h create mode 100644 bsd-user/riscv/target_arch_vmparam.h create mode 100644 bsd-user/riscv/target_syscall.h create mode 100644 bsd-user/riscv/signal.c create mode 100644 bsd-user/riscv/target_arch_cpu.c create mode 100644 tests/data/acpi/riscv64/virt/SRAT.numamem From: Jason Chien <jason.chien@sifive.com> RVV spec allows implementations to set vl with values within [ceil(AVL/2),VLMAX] when VLMAX < AVL < 2*VLMAX. This commit adds a property "rvv_vl_half_avl" to enable setting vl = ceil(AVL/2). This behavior helps identify compiler issues and bugs. Signed-off-by: Jason Chien <jason.chien@sifive.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Message-ID: <20240722175004.23666-1-jason.chien@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu_cfg.h | 1 + target/riscv/cpu.c | 1 + target/riscv/vector_helper.c | 2 ++ 3 files changed, 4 insertions(+) diff --git a/target/riscv/cpu_cfg.h b/target/riscv/cpu_cfg.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_cfg.h +++ b/target/riscv/cpu_cfg.h @@ -XXX,XX +XXX,XX @@ struct RISCVCPUConfig { bool ext_smepmp; bool rvv_ta_all_1s; bool rvv_ma_all_1s; + bool rvv_vl_half_avl; uint32_t mvendorid; uint64_t marchid; diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static Property riscv_cpu_properties[] = { DEFINE_PROP_BOOL("rvv_ta_all_1s", RISCVCPU, cfg.rvv_ta_all_1s, false), DEFINE_PROP_BOOL("rvv_ma_all_1s", RISCVCPU, cfg.rvv_ma_all_1s, false), + DEFINE_PROP_BOOL("rvv_vl_half_avl", RISCVCPU, cfg.rvv_vl_half_avl, false), /* * write_misa() is marked as experimental for now so mark diff --git a/target/riscv/vector_helper.c b/target/riscv/vector_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/vector_helper.c +++ b/target/riscv/vector_helper.c @@ -XXX,XX +XXX,XX @@ target_ulong HELPER(vsetvl)(CPURISCVState *env, target_ulong s1, vlmax = vext_get_vlmax(cpu->cfg.vlenb, vsew, lmul); if (s1 <= vlmax) { vl = s1; + } else if (s1 < 2 * vlmax && cpu->cfg.rvv_vl_half_avl) { + vl = (s1 + 1) >> 1; } else { vl = vlmax; } -- 2.46.2 From: Haibo Xu <haibo1.xu@intel.com> As per process documented (steps 1-3) in bios-tables-test.c, add empty AML data file for RISC-V ACPI SRAT table and add the entry in bios-tables-test-allowed-diff.h. Signed-off-by: Haibo Xu <haibo1.xu@intel.com> Reviewed-by: Sunil V L <sunilvl@ventanamicro.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <0e30216273f2f59916bc651350578d8e8bc3a75f.1723172696.git.haibo1.xu@intel.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- tests/qtest/bios-tables-test-allowed-diff.h | 1 + tests/data/acpi/riscv64/virt/SRAT.numamem | 0 2 files changed, 1 insertion(+) create mode 100644 tests/data/acpi/riscv64/virt/SRAT.numamem diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test-allowed-diff.h +++ b/tests/qtest/bios-tables-test-allowed-diff.h @@ -1 +1,2 @@ /* List of comma-separated changed AML files to ignore */ +"tests/data/acpi/riscv64/virt/SRAT.numamem", diff --git a/tests/data/acpi/riscv64/virt/SRAT.numamem b/tests/data/acpi/riscv64/virt/SRAT.numamem new file mode 100644 index XXXXXXX..XXXXXXX -- 2.46.2 From: Haibo Xu <haibo1.xu@intel.com> Add ACPI SRAT table test case for RISC-V when NUMA was enabled. Signed-off-by: Haibo Xu <haibo1.xu@intel.com> Reviewed-by: Sunil V L <sunilvl@ventanamicro.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <a6f7e1a4b20ff7eb199e94ca0c8aa2e6794ce5b2.1723172696.git.haibo1.xu@intel.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- tests/qtest/bios-tables-test.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/tests/qtest/bios-tables-test.c b/tests/qtest/bios-tables-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test.c +++ b/tests/qtest/bios-tables-test.c @@ -XXX,XX +XXX,XX @@ static void test_acpi_microvm_ioapic2_tcg(void) free_test_data(&data); } +static void test_acpi_riscv64_virt_tcg_numamem(void) +{ + test_data data = { + .machine = "virt", + .arch = "riscv64", + .tcg_only = true, + .uefi_fl1 = "pc-bios/edk2-riscv-code.fd", + .uefi_fl2 = "pc-bios/edk2-riscv-vars.fd", + .cd = "tests/data/uefi-boot-images/bios-tables-test.riscv64.iso.qcow2", + .ram_start = 0x80000000ULL, + .scan_len = 128ULL * 1024 * 1024, + }; + + data.variant = ".numamem"; + /* + * RHCT will have ISA string encoded. To reduce the effort + * of updating expected AML file for any new default ISA extension, + * use the profile rva22s64. + */ + test_acpi_one(" -cpu rva22s64" + " -object memory-backend-ram,id=ram0,size=128M" + " -numa node,memdev=ram0", + &data); + free_test_data(&data); +} + static void test_acpi_aarch64_virt_tcg_numamem(void) { test_data data = { @@ -XXX,XX +XXX,XX @@ int main(int argc, char *argv[]) } else if (strcmp(arch, "riscv64") == 0) { if (has_tcg && qtest_has_device("virtio-blk-pci")) { qtest_add_func("acpi/virt", test_acpi_riscv64_virt_tcg); + qtest_add_func("acpi/virt/numamem", + test_acpi_riscv64_virt_tcg_numamem); } } ret = g_test_run(); -- 2.46.2 From: Haibo Xu <haibo1.xu@intel.com> As per the step 5 in the process documented in bios-tables-test.c, generate the expected ACPI SRAT AML data file for RISC-V using the rebuild-expected-aml.sh script and update the bios-tables-test-allowed-diff.h. This is a new file being added for the first time. Hence, iASL diff output is not added. Signed-off-by: Haibo Xu <haibo1.xu@intel.com> Reviewed-by: Sunil V L <sunilvl@ventanamicro.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <a667480203b35508038176c8ce4722370294cc57.1723172696.git.haibo1.xu@intel.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- tests/qtest/bios-tables-test-allowed-diff.h | 1 - tests/data/acpi/riscv64/virt/SRAT.numamem | Bin 0 -> 108 bytes 2 files changed, 1 deletion(-) diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test-allowed-diff.h +++ b/tests/qtest/bios-tables-test-allowed-diff.h @@ -1,2 +1 @@ /* List of comma-separated changed AML files to ignore */ -"tests/data/acpi/riscv64/virt/SRAT.numamem", diff --git a/tests/data/acpi/riscv64/virt/SRAT.numamem b/tests/data/acpi/riscv64/virt/SRAT.numamem index XXXXXXX..XXXXXXX 100644 Binary files a/tests/data/acpi/riscv64/virt/SRAT.numamem and b/tests/data/acpi/riscv64/virt/SRAT.numamem differ -- 2.46.2 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Gitlab issue [1] reports a misleading error when trying to run a 'rv64' cpu with 'zfinx' and without 'f': $ ./build/qemu-system-riscv64 -nographic -M virt -cpu rv64,zfinx=true,f=false qemu-system-riscv64: Zfinx cannot be supported together with F extension The user explicitly disabled F and the error message mentions a conflict with Zfinx and F. The problem isn't the error reporting, but the logic used when applying the implied ZFA rule that enables RVF unconditionally, without honoring user choice (i.e. keep F disabled). Change cpu_enable_implied_rule() to check if the user deliberately disabled a MISA bit. In this case we shouldn't either re-enable the bit nor apply any implied rules related to it. After this change the error message now shows: $ ./build/qemu-system-riscv64 -nographic -M virt -cpu rv64,zfinx=true,f=false qemu-system-riscv64: Zfa extension requires F extension Disabling 'zfa': $ ./build/qemu-system-riscv64 -nographic -M virt -cpu rv64,zfinx=true,f=false,zfa=false qemu-system-riscv64: D extension requires F extension And finally after disabling 'd': $ ./build/qemu-system-riscv64 -nographic -M virt -cpu rv64,zfinx=true,f=false,zfa=false,d=false (OpenSBI boots ...) [1] https://gitlab.com/qemu-project/qemu/-/issues/2486 Cc: Frank Chang <frank.chang@sifive.com> Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2486 Fixes: 047da861f9 ("target/riscv: Introduce extension implied rule helpers") Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240824173338.316666-1-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void cpu_enable_implied_rule(RISCVCPU *cpu, if (!enabled) { /* Enable the implied MISAs. */ if (rule->implied_misa_exts) { - riscv_cpu_set_misa_ext(env, - env->misa_ext | rule->implied_misa_exts); - for (i = 0; misa_bits[i] != 0; i++) { if (rule->implied_misa_exts & misa_bits[i]) { + /* + * If the user disabled the misa_bit do not re-enable it + * and do not apply any implied rules related to it. + */ + if (cpu_misa_ext_is_user_set(misa_bits[i]) && + !(env->misa_ext & misa_bits[i])) { + continue; + } + + riscv_cpu_set_misa_ext(env, env->misa_ext | misa_bits[i]); ir = g_hash_table_lookup(misa_ext_implied_rules, GUINT_TO_POINTER(misa_bits[i])); -- 2.46.2 From: Vladimir Isaev <vladimir.isaev@syntacore.com> za64rs requires priv 1.12 when enabled by priv 1.11. This fixes annoying warning: warning: disabling za64rs extension for hart 0x00000000 because privilege spec version does not match on priv 1.11 CPUs. Fixes: 68c9e54beae8 ("target/riscv: do not enable all named features by default") Signed-off-by: Vladimir Isaev <vladimir.isaev@syntacore.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20240823063431.17474-1-vladimir.isaev@syntacore.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(zihpm, PRIV_VERSION_1_12_0, ext_zihpm), ISA_EXT_DATA_ENTRY(zimop, PRIV_VERSION_1_13_0, ext_zimop), ISA_EXT_DATA_ENTRY(zmmul, PRIV_VERSION_1_12_0, ext_zmmul), - ISA_EXT_DATA_ENTRY(za64rs, PRIV_VERSION_1_12_0, has_priv_1_11), + ISA_EXT_DATA_ENTRY(za64rs, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(zaamo, PRIV_VERSION_1_12_0, ext_zaamo), ISA_EXT_DATA_ENTRY(zabha, PRIV_VERSION_1_13_0, ext_zabha), ISA_EXT_DATA_ENTRY(zacas, PRIV_VERSION_1_12_0, ext_zacas), -- 2.46.2 From: Alistair Francis <alistair23@gmail.com> The OpenTitan Ibex CPU now supports the the Zba, Zbb, Zbc and Zbs bit-manipulation sub-extensions ratified in v.1.0.0 of the RISC-V Bit- Manipulation ISA Extension, so let's enable them in QEMU as well. 1: https://github.com/lowRISC/opentitan/pull/9748 Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20240823003231.3522113-1-alistair.francis@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static void rv32_ibex_cpu_init(Object *obj) cpu->cfg.ext_zicsr = true; cpu->cfg.pmp = true; cpu->cfg.ext_smepmp = true; + + cpu->cfg.ext_zba = true; + cpu->cfg.ext_zbb = true; + cpu->cfg.ext_zbc = true; + cpu->cfg.ext_zbs = true; } static void rv32_imafcu_nommu_cpu_init(Object *obj) -- 2.46.2 From: Andrew Jones <ajones@ventanamicro.com> Just as the hart bit setting of the AIA should be calculated as ceil(log2(max_hart_id + 1)) the group bit setting should be calculated as ceil(log2(max_group_id + 1)). The hart bits are implemented by passing max_hart_id to find_last_bit() and adding one to the result. Do the same for the group bit setting. Signed-off-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20240821075040.498945-2-ajones@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/kvm/kvm-cpu.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/target/riscv/kvm/kvm-cpu.c b/target/riscv/kvm/kvm-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/kvm/kvm-cpu.c +++ b/target/riscv/kvm/kvm-cpu.c @@ -XXX,XX +XXX,XX @@ void kvm_riscv_aia_create(MachineState *machine, uint64_t group_shift, uint64_t max_hart_per_socket = 0; uint64_t socket, base_hart, hart_count, socket_imsic_base, imsic_addr; uint64_t socket_bits, hart_bits, guest_bits; + uint64_t max_group_id; aia_fd = kvm_create_device(kvm_state, KVM_DEV_TYPE_RISCV_AIA, false); @@ -XXX,XX +XXX,XX @@ void kvm_riscv_aia_create(MachineState *machine, uint64_t group_shift, if (socket_count > 1) { - socket_bits = find_last_bit(&socket_count, BITS_PER_LONG) + 1; + max_group_id = socket_count - 1; + socket_bits = find_last_bit(&max_group_id, BITS_PER_LONG) + 1; ret = kvm_device_access(aia_fd, KVM_DEV_RISCV_AIA_GRP_CONFIG, KVM_DEV_RISCV_AIA_CONFIG_GROUP_BITS, &socket_bits, true, NULL); -- 2.46.2 From: Andrew Jones <ajones@ventanamicro.com> While the spec doesn't state it, setting timecmp to UINT64_MAX is another way to stop a timer, as it's considered setting the next timer event to occur at infinity. And, even if the time CSR does eventually reach UINT64_MAX, the very next tick will bring it back to zero, once again less than timecmp. For this reason riscv_timer_write_timecmp() special cases UINT64_MAX. However, if a previously set timecmp has not yet expired, then setting timecmp to UINT64_MAX to disable / stop it would not work, as the special case left the previous QEMU timer active, which would then still deliver an interrupt at that previous timecmp time. Ensure the stopped timer will not still deliver an interrupt by also deleting the QEMU timer in the UINT64_MAX special case. Fixes: ae0edf2188b3 ("target/riscv: No need to re-start QEMU timer when timecmp == UINT64_MAX") Signed-off-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240829084002.1805006-2-ajones@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/time_helper.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/riscv/time_helper.c b/target/riscv/time_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/time_helper.c +++ b/target/riscv/time_helper.c @@ -XXX,XX +XXX,XX @@ void riscv_timer_write_timecmp(CPURISCVState *env, QEMUTimer *timer, * equals UINT64_MAX. */ if (timecmp == UINT64_MAX) { + timer_del(timer); return; } -- 2.46.2 From: Maria Klauchek <m.klauchek@syntacore.com> FCSR is a part of F extension. Print it to log if FPU option is enabled. Signed-off-by: Maria Klauchek <m.klauchek@syntacore.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240902103433.18424-1-m.klauchek@syntacore.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_dump_state(CPUState *cs, FILE *f, int flags) } } if (flags & CPU_DUMP_FPU) { + target_ulong val = 0; + RISCVException res = riscv_csrrw_debug(env, CSR_FCSR, &val, 0, 0); + if (res == RISCV_EXCP_NONE) { + qemu_fprintf(f, " %-8s " TARGET_FMT_lx "\n", + csr_ops[CSR_FCSR].name, val); + } for (i = 0; i < 32; i++) { qemu_fprintf(f, " %-8s %016" PRIx64, riscv_fpr_regnames[i], env->fpr[i]); -- 2.46.2 From: Milan P. Stanić <mps@arvanta.net> build fails on musl libc (alpine linux) with this error: ../util/cpuinfo-riscv.c: In function 'cpuinfo_init': ../util/cpuinfo-riscv.c:63:21: error: '__NR_riscv_hwprobe' undeclared (first use in this function); did you mean 'riscv_hwprobe'? 63 | if (syscall(__NR_riscv_hwprobe, &pair, 1, 0, NULL, 0) == 0 | ^~~~~~~~~~~~~~~~~~ | riscv_hwprobe ../util/cpuinfo-riscv.c:63:21: note: each undeclared identifier is reported only once for each function it appears in ninja: subcommand failed add '#include "asm/unistd.h"' to util/cpuinfo-riscv.c fixes build Signed-off-by: Milan P. Stanić <mps@arvanta.net> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240905150702.2484-1-mps@arvanta.net> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- util/cpuinfo-riscv.c | 1 + 1 file changed, 1 insertion(+) diff --git a/util/cpuinfo-riscv.c b/util/cpuinfo-riscv.c index XXXXXXX..XXXXXXX 100644 --- a/util/cpuinfo-riscv.c +++ b/util/cpuinfo-riscv.c @@ -XXX,XX +XXX,XX @@ #ifdef CONFIG_ASM_HWPROBE_H #include <asm/hwprobe.h> #include <sys/syscall.h> +#include <asm/unistd.h> #endif unsigned cpuinfo; -- 2.46.2 From: Alvin Chang <alvinga@andestech.com> This commit allows program to write textra trigger CSR for type 2, 3, 6 triggers. In this preliminary patch, the textra.MHVALUE and the textra.MHSELECT fields are allowed to be configured. Other fields, such as textra.SBYTEMASK, textra.SVALUE, and textra.SSELECT, are hardwired to zero for now. For textra.MHSELECT field, the only legal values are 0 (ignore) and 4 (mcontext). Writing 1~3 into textra.MHSELECT will be changed to 0, and writing 5~7 into textra.MHSELECT will be changed to 4. This behavior is aligned to RISC-V SPIKE simulator. Signed-off-by: Alvin Chang <alvinga@andestech.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240826024657.262553-2-alvinga@andestech.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu_bits.h | 10 ++++++ target/riscv/debug.c | 69 +++++++++++++++++++++++++++++++++++++---- 2 files changed, 73 insertions(+), 6 deletions(-) diff --git a/target/riscv/cpu_bits.h b/target/riscv/cpu_bits.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_bits.h +++ b/target/riscv/cpu_bits.h @@ -XXX,XX +XXX,XX @@ typedef enum RISCVException { #define JVT_BASE (~0x3F) /* Debug Sdtrig CSR masks */ +#define TEXTRA32_MHVALUE 0xFC000000 +#define TEXTRA32_MHSELECT 0x03800000 +#define TEXTRA32_SBYTEMASK 0x000C0000 +#define TEXTRA32_SVALUE 0x0003FFFC +#define TEXTRA32_SSELECT 0x00000003 +#define TEXTRA64_MHVALUE 0xFFF8000000000000ULL +#define TEXTRA64_MHSELECT 0x0007000000000000ULL +#define TEXTRA64_SBYTEMASK 0x000000F000000000ULL +#define TEXTRA64_SVALUE 0x00000003FFFFFFFCULL +#define TEXTRA64_SSELECT 0x0000000000000003ULL #define MCONTEXT32 0x0000003F #define MCONTEXT64 0x0000000000001FFFULL #define MCONTEXT32_HCONTEXT 0x0000007F diff --git a/target/riscv/debug.c b/target/riscv/debug.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/debug.c +++ b/target/riscv/debug.c @@ -XXX,XX +XXX,XX @@ static inline void warn_always_zero_bit(target_ulong val, target_ulong mask, } } +static target_ulong textra_validate(CPURISCVState *env, target_ulong tdata3) +{ + target_ulong mhvalue, mhselect; + target_ulong mhselect_new; + target_ulong textra; + const uint32_t mhselect_no_rvh[8] = { 0, 0, 0, 0, 4, 4, 4, 4 }; + + switch (riscv_cpu_mxl(env)) { + case MXL_RV32: + mhvalue = get_field(tdata3, TEXTRA32_MHVALUE); + mhselect = get_field(tdata3, TEXTRA32_MHSELECT); + /* Validate unimplemented (always zero) bits */ + warn_always_zero_bit(tdata3, (target_ulong)TEXTRA32_SBYTEMASK, + "sbytemask"); + warn_always_zero_bit(tdata3, (target_ulong)TEXTRA32_SVALUE, + "svalue"); + warn_always_zero_bit(tdata3, (target_ulong)TEXTRA32_SSELECT, + "sselect"); + break; + case MXL_RV64: + case MXL_RV128: + mhvalue = get_field(tdata3, TEXTRA64_MHVALUE); + mhselect = get_field(tdata3, TEXTRA64_MHSELECT); + /* Validate unimplemented (always zero) bits */ + warn_always_zero_bit(tdata3, (target_ulong)TEXTRA64_SBYTEMASK, + "sbytemask"); + warn_always_zero_bit(tdata3, (target_ulong)TEXTRA64_SVALUE, + "svalue"); + warn_always_zero_bit(tdata3, (target_ulong)TEXTRA64_SSELECT, + "sselect"); + break; + default: + g_assert_not_reached(); + } + + /* Validate mhselect. */ + mhselect_new = mhselect_no_rvh[mhselect]; + if (mhselect != mhselect_new) { + qemu_log_mask(LOG_UNIMP, "mhselect only supports 0 or 4 for now\n"); + } + + /* Write legal values into textra */ + textra = 0; + switch (riscv_cpu_mxl(env)) { + case MXL_RV32: + textra = set_field(textra, TEXTRA32_MHVALUE, mhvalue); + textra = set_field(textra, TEXTRA32_MHSELECT, mhselect_new); + break; + case MXL_RV64: + case MXL_RV128: + textra = set_field(textra, TEXTRA64_MHVALUE, mhvalue); + textra = set_field(textra, TEXTRA64_MHSELECT, mhselect_new); + break; + default: + g_assert_not_reached(); + } + + return textra; +} + static void do_trigger_action(CPURISCVState *env, target_ulong trigger_index) { trigger_action_t action = get_trigger_action(env, trigger_index); @@ -XXX,XX +XXX,XX @@ static void type2_reg_write(CPURISCVState *env, target_ulong index, } break; case TDATA3: - qemu_log_mask(LOG_UNIMP, - "tdata3 is not supported for type 2 trigger\n"); + env->tdata3[index] = textra_validate(env, val); break; default: g_assert_not_reached(); @@ -XXX,XX +XXX,XX @@ static void type6_reg_write(CPURISCVState *env, target_ulong index, } break; case TDATA3: - qemu_log_mask(LOG_UNIMP, - "tdata3 is not supported for type 6 trigger\n"); + env->tdata3[index] = textra_validate(env, val); break; default: g_assert_not_reached(); @@ -XXX,XX +XXX,XX @@ static void itrigger_reg_write(CPURISCVState *env, target_ulong index, "tdata2 is not supported for icount trigger\n"); break; case TDATA3: - qemu_log_mask(LOG_UNIMP, - "tdata3 is not supported for icount trigger\n"); + env->tdata3[index] = textra_validate(env, val); break; default: g_assert_not_reached(); -- 2.46.2 From: Alvin Chang <alvinga@andestech.com> According to RISC-V Debug specification, the optional textra32 and textra64 trigger CSRs can be used to configure additional matching conditions for the triggers. For example, if the textra.MHSELECT field is set to 4 (mcontext), this trigger will only match or fire if the low bits of mcontext/hcontext equal textra.MHVALUE field. This commit adds the aforementioned matching condition as common trigger matching conditions. Currently, the only legal values of textra.MHSELECT are 0 (ignore) and 4 (mcontext). When textra.MHSELECT is 0, we pass the checking. When textra.MHSELECT is 4, we compare textra.MHVALUE with mcontext CSR. The remaining fields, such as textra.SBYTEMASK, textra.SVALUE, and textra.SSELECT, are hardwired to zero for now. Thus, we skip checking them here. Signed-off-by: Alvin Chang <alvinga@andestech.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240826024657.262553-3-alvinga@andestech.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/debug.h | 3 +++ target/riscv/debug.c | 45 +++++++++++++++++++++++++++++++++++++++++++- 2 files changed, 47 insertions(+), 1 deletion(-) diff --git a/target/riscv/debug.h b/target/riscv/debug.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/debug.h +++ b/target/riscv/debug.h @@ -XXX,XX +XXX,XX @@ enum { #define ITRIGGER_VU BIT(25) #define ITRIGGER_VS BIT(26) +#define MHSELECT_IGNORE 0 +#define MHSELECT_MCONTEXT 4 + bool tdata_available(CPURISCVState *env, int tdata_index); target_ulong tselect_csr_read(CPURISCVState *env); diff --git a/target/riscv/debug.c b/target/riscv/debug.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/debug.c +++ b/target/riscv/debug.c @@ -XXX,XX +XXX,XX @@ static bool trigger_priv_match(CPURISCVState *env, trigger_type_t type, return false; } +static bool trigger_textra_match(CPURISCVState *env, trigger_type_t type, + int trigger_index) +{ + target_ulong textra = env->tdata3[trigger_index]; + target_ulong mhvalue, mhselect; + + if (type < TRIGGER_TYPE_AD_MATCH || type > TRIGGER_TYPE_AD_MATCH6) { + /* textra checking is only applicable when type is 2, 3, 4, 5, or 6 */ + return true; + } + + switch (riscv_cpu_mxl(env)) { + case MXL_RV32: + mhvalue = get_field(textra, TEXTRA32_MHVALUE); + mhselect = get_field(textra, TEXTRA32_MHSELECT); + break; + case MXL_RV64: + case MXL_RV128: + mhvalue = get_field(textra, TEXTRA64_MHVALUE); + mhselect = get_field(textra, TEXTRA64_MHSELECT); + break; + default: + g_assert_not_reached(); + } + + /* Check mhvalue and mhselect. */ + switch (mhselect) { + case MHSELECT_IGNORE: + break; + case MHSELECT_MCONTEXT: + /* Match if the low bits of mcontext/hcontext equal mhvalue. */ + if (mhvalue != env->mcontext) { + return false; + } + break; + default: + break; + } + + return true; +} + /* Common matching conditions for all types of the triggers. */ static bool trigger_common_match(CPURISCVState *env, trigger_type_t type, int trigger_index) { - return trigger_priv_match(env, type, trigger_index); + return trigger_priv_match(env, type, trigger_index) && + trigger_textra_match(env, type, trigger_index); } /* type 2 trigger */ -- 2.46.2 From: Samuel Holland <samuel.holland@sifive.com> When riscv_load_firmware() loads an ELF, the ELF segment addresses are used, not the passed-in firmware_load_addr. The machine models assume the firmware entry point is what they provided for firmware_load_addr, and use that address to generate the boot ROM, so if the ELF is linked at any other address, the boot ROM will jump to empty memory. Pass back the ELF entry point to use when generating the boot ROM, so the boot ROM can jump to firmware loaded anywhere in RAM. For example, on the virt machine, this allows using an OpenSBI fw_dynamic.elf built with FW_TEXT_START values other than 0x80000000. Signed-off-by: Samuel Holland <samuel.holland@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240817002651.3209701-1-samuel.holland@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/riscv/boot.h | 4 ++-- hw/riscv/boot.c | 11 ++++++----- hw/riscv/microchip_pfsoc.c | 2 +- hw/riscv/opentitan.c | 3 ++- hw/riscv/shakti_c.c | 13 ++++++------- hw/riscv/sifive_u.c | 4 ++-- hw/riscv/spike.c | 5 +++-- hw/riscv/virt.c | 4 ++-- 8 files changed, 24 insertions(+), 22 deletions(-) diff --git a/include/hw/riscv/boot.h b/include/hw/riscv/boot.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/riscv/boot.h +++ b/include/hw/riscv/boot.h @@ -XXX,XX +XXX,XX @@ target_ulong riscv_calc_kernel_start_addr(RISCVHartArrayState *harts, target_ulong firmware_end_addr); target_ulong riscv_find_and_load_firmware(MachineState *machine, const char *default_machine_firmware, - hwaddr firmware_load_addr, + hwaddr *firmware_load_addr, symbol_fn_t sym_cb); const char *riscv_default_firmware_name(RISCVHartArrayState *harts); char *riscv_find_firmware(const char *firmware_filename, const char *default_machine_firmware); target_ulong riscv_load_firmware(const char *firmware_filename, - hwaddr firmware_load_addr, + hwaddr *firmware_load_addr, symbol_fn_t sym_cb); target_ulong riscv_load_kernel(MachineState *machine, RISCVHartArrayState *harts, diff --git a/hw/riscv/boot.c b/hw/riscv/boot.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/boot.c +++ b/hw/riscv/boot.c @@ -XXX,XX +XXX,XX @@ char *riscv_find_firmware(const char *firmware_filename, target_ulong riscv_find_and_load_firmware(MachineState *machine, const char *default_machine_firmware, - hwaddr firmware_load_addr, + hwaddr *firmware_load_addr, symbol_fn_t sym_cb) { char *firmware_filename; - target_ulong firmware_end_addr = firmware_load_addr; + target_ulong firmware_end_addr = *firmware_load_addr; firmware_filename = riscv_find_firmware(machine->firmware, default_machine_firmware); @@ -XXX,XX +XXX,XX @@ target_ulong riscv_find_and_load_firmware(MachineState *machine, } target_ulong riscv_load_firmware(const char *firmware_filename, - hwaddr firmware_load_addr, + hwaddr *firmware_load_addr, symbol_fn_t sym_cb) { uint64_t firmware_entry, firmware_end; @@ -XXX,XX +XXX,XX @@ target_ulong riscv_load_firmware(const char *firmware_filename, if (load_elf_ram_sym(firmware_filename, NULL, NULL, NULL, &firmware_entry, NULL, &firmware_end, NULL, 0, EM_RISCV, 1, 0, NULL, true, sym_cb) > 0) { + *firmware_load_addr = firmware_entry; return firmware_end; } firmware_size = load_image_targphys_as(firmware_filename, - firmware_load_addr, + *firmware_load_addr, current_machine->ram_size, NULL); if (firmware_size > 0) { - return firmware_load_addr + firmware_size; + return *firmware_load_addr + firmware_size; } error_report("could not load firmware '%s'", firmware_filename); diff --git a/hw/riscv/microchip_pfsoc.c b/hw/riscv/microchip_pfsoc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/microchip_pfsoc.c +++ b/hw/riscv/microchip_pfsoc.c @@ -XXX,XX +XXX,XX @@ static void microchip_icicle_kit_machine_init(MachineState *machine) /* Load the firmware */ firmware_end_addr = riscv_find_and_load_firmware(machine, firmware_name, - firmware_load_addr, NULL); + &firmware_load_addr, NULL); if (kernel_as_payload) { kernel_start_addr = riscv_calc_kernel_start_addr(&s->soc.u_cpus, diff --git a/hw/riscv/opentitan.c b/hw/riscv/opentitan.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/opentitan.c +++ b/hw/riscv/opentitan.c @@ -XXX,XX +XXX,XX @@ static void opentitan_machine_init(MachineState *machine) memmap[IBEX_DEV_RAM].base, machine->ram); if (machine->firmware) { - riscv_load_firmware(machine->firmware, memmap[IBEX_DEV_RAM].base, NULL); + hwaddr firmware_load_addr = memmap[IBEX_DEV_RAM].base; + riscv_load_firmware(machine->firmware, &firmware_load_addr, NULL); } if (machine->kernel_filename) { diff --git a/hw/riscv/shakti_c.c b/hw/riscv/shakti_c.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/shakti_c.c +++ b/hw/riscv/shakti_c.c @@ -XXX,XX +XXX,XX @@ static void shakti_c_machine_state_init(MachineState *mstate) { ShaktiCMachineState *sms = RISCV_SHAKTI_MACHINE(mstate); MemoryRegion *system_memory = get_system_memory(); + hwaddr firmware_load_addr = shakti_c_memmap[SHAKTI_C_RAM].base; /* Initialize SoC */ object_initialize_child(OBJECT(mstate), "soc", &sms->soc, @@ -XXX,XX +XXX,XX @@ static void shakti_c_machine_state_init(MachineState *mstate) shakti_c_memmap[SHAKTI_C_RAM].base, mstate->ram); + if (mstate->firmware) { + riscv_load_firmware(mstate->firmware, &firmware_load_addr, NULL); + } + /* ROM reset vector */ - riscv_setup_rom_reset_vec(mstate, &sms->soc.cpus, - shakti_c_memmap[SHAKTI_C_RAM].base, + riscv_setup_rom_reset_vec(mstate, &sms->soc.cpus, firmware_load_addr, shakti_c_memmap[SHAKTI_C_ROM].base, shakti_c_memmap[SHAKTI_C_ROM].size, 0, 0); - if (mstate->firmware) { - riscv_load_firmware(mstate->firmware, - shakti_c_memmap[SHAKTI_C_RAM].base, - NULL); - } } static void shakti_c_machine_instance_init(Object *obj) diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/sifive_u.c +++ b/hw/riscv/sifive_u.c @@ -XXX,XX +XXX,XX @@ static void sifive_u_machine_init(MachineState *machine) SiFiveUState *s = RISCV_U_MACHINE(machine); MemoryRegion *system_memory = get_system_memory(); MemoryRegion *flash0 = g_new(MemoryRegion, 1); - target_ulong start_addr = memmap[SIFIVE_U_DEV_DRAM].base; + hwaddr start_addr = memmap[SIFIVE_U_DEV_DRAM].base; target_ulong firmware_end_addr, kernel_start_addr; const char *firmware_name; uint32_t start_addr_hi32 = 0x00000000; @@ -XXX,XX +XXX,XX @@ static void sifive_u_machine_init(MachineState *machine) firmware_name = riscv_default_firmware_name(&s->soc.u_cpus); firmware_end_addr = riscv_find_and_load_firmware(machine, firmware_name, - start_addr, NULL); + &start_addr, NULL); if (machine->kernel_filename) { kernel_start_addr = riscv_calc_kernel_start_addr(&s->soc.u_cpus, diff --git a/hw/riscv/spike.c b/hw/riscv/spike.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/spike.c +++ b/hw/riscv/spike.c @@ -XXX,XX +XXX,XX @@ static void spike_board_init(MachineState *machine) MemoryRegion *system_memory = get_system_memory(); MemoryRegion *mask_rom = g_new(MemoryRegion, 1); target_ulong firmware_end_addr = memmap[SPIKE_DRAM].base; + hwaddr firmware_load_addr = memmap[SPIKE_DRAM].base; target_ulong kernel_start_addr; char *firmware_name; uint32_t fdt_load_addr; @@ -XXX,XX +XXX,XX @@ static void spike_board_init(MachineState *machine) /* Load firmware */ if (firmware_name) { firmware_end_addr = riscv_load_firmware(firmware_name, - memmap[SPIKE_DRAM].base, + &firmware_load_addr, htif_symbol_callback); g_free(firmware_name); } @@ -XXX,XX +XXX,XX @@ static void spike_board_init(MachineState *machine) riscv_load_fdt(fdt_load_addr, machine->fdt); /* load the reset vector */ - riscv_setup_rom_reset_vec(machine, &s->soc[0], memmap[SPIKE_DRAM].base, + riscv_setup_rom_reset_vec(machine, &s->soc[0], firmware_load_addr, memmap[SPIKE_MROM].base, memmap[SPIKE_MROM].size, kernel_entry, fdt_load_addr); diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_machine_done(Notifier *notifier, void *data) machine_done); const MemMapEntry *memmap = virt_memmap; MachineState *machine = MACHINE(s); - target_ulong start_addr = memmap[VIRT_DRAM].base; + hwaddr start_addr = memmap[VIRT_DRAM].base; target_ulong firmware_end_addr, kernel_start_addr; const char *firmware_name = riscv_default_firmware_name(&s->soc[0]); uint64_t fdt_load_addr; @@ -XXX,XX +XXX,XX @@ static void virt_machine_done(Notifier *notifier, void *data) } firmware_end_addr = riscv_find_and_load_firmware(machine, firmware_name, - start_addr, NULL); + &start_addr, NULL); pflash_blk0 = pflash_cfi01_get_blk(s->flash[0]); if (pflash_blk0) { -- 2.46.2 From: Alexandre Ghiti <alexghiti@rivosinc.com> The Svvptc extension describes a uarch that does not cache invalid TLB entries: that's the case for qemu so there is nothing particular to implement other than the introduction of this extension. Since qemu already exposes Svvptc behaviour, let's enable it by default since it allows to drastically reduce the number of sfence.vma emitted by S-mode. Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240828083651.203861-1-alexghiti@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu_cfg.h | 1 + target/riscv/cpu.c | 2 ++ 2 files changed, 3 insertions(+) diff --git a/target/riscv/cpu_cfg.h b/target/riscv/cpu_cfg.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_cfg.h +++ b/target/riscv/cpu_cfg.h @@ -XXX,XX +XXX,XX @@ struct RISCVCPUConfig { bool ext_svinval; bool ext_svnapot; bool ext_svpbmt; + bool ext_svvptc; bool ext_zdinx; bool ext_zaamo; bool ext_zacas; diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(svinval, PRIV_VERSION_1_12_0, ext_svinval), ISA_EXT_DATA_ENTRY(svnapot, PRIV_VERSION_1_12_0, ext_svnapot), ISA_EXT_DATA_ENTRY(svpbmt, PRIV_VERSION_1_12_0, ext_svpbmt), + ISA_EXT_DATA_ENTRY(svvptc, PRIV_VERSION_1_13_0, ext_svvptc), ISA_EXT_DATA_ENTRY(xtheadba, PRIV_VERSION_1_11_0, ext_xtheadba), ISA_EXT_DATA_ENTRY(xtheadbb, PRIV_VERSION_1_11_0, ext_xtheadbb), ISA_EXT_DATA_ENTRY(xtheadbs, PRIV_VERSION_1_11_0, ext_xtheadbs), @@ -XXX,XX +XXX,XX @@ const RISCVCPUMultiExtConfig riscv_cpu_extensions[] = { MULTI_EXT_CFG_BOOL("svinval", ext_svinval, false), MULTI_EXT_CFG_BOOL("svnapot", ext_svnapot, false), MULTI_EXT_CFG_BOOL("svpbmt", ext_svpbmt, false), + MULTI_EXT_CFG_BOOL("svvptc", ext_svvptc, true), MULTI_EXT_CFG_BOOL("zicntr", ext_zicntr, true), MULTI_EXT_CFG_BOOL("zihpm", ext_zihpm, true), -- 2.46.2 From: Andrew Jones <ajones@ventanamicro.com> C doesn't extend the sign bit for unsigned types since there isn't a sign bit to extend. This means a promotion of a u32 to a u64 results in the upper 32 bits of the u64 being zero. If that result is then used as a mask on another u64 the upper 32 bits will be cleared. rv32 physical addresses may be up to 34 bits wide, so we don't want to clear the high bits while page aligning the address. The fix is to use hwaddr for the mask, which, even on rv32, is 64-bits wide. Fixes: af3fc195e3c8 ("target/riscv: Change the TLB page size depends on PMP entries.") Signed-off-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20240909083241.43836-2-ajones@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu_helper.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/target/riscv/cpu_helper.c b/target/riscv/cpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_helper.c +++ b/target/riscv/cpu_helper.c @@ -XXX,XX +XXX,XX @@ bool riscv_cpu_tlb_fill(CPUState *cs, vaddr address, int size, int ret = TRANSLATE_FAIL; int mode = mmuidx_priv(mmu_idx); /* default TLB page size */ - target_ulong tlb_size = TARGET_PAGE_SIZE; + hwaddr tlb_size = TARGET_PAGE_SIZE; env->guest_phys_fault_addr = 0; @@ -XXX,XX +XXX,XX @@ bool riscv_cpu_tlb_fill(CPUState *cs, vaddr address, int size, qemu_log_mask(CPU_LOG_MMU, "%s PMP address=" HWADDR_FMT_plx " ret %d prot" - " %d tlb_size " TARGET_FMT_lu "\n", + " %d tlb_size %" HWADDR_PRIu "\n", __func__, pa, ret, prot_pmp, tlb_size); prot &= prot_pmp; @@ -XXX,XX +XXX,XX @@ bool riscv_cpu_tlb_fill(CPUState *cs, vaddr address, int size, qemu_log_mask(CPU_LOG_MMU, "%s PMP address=" HWADDR_FMT_plx " ret %d prot" - " %d tlb_size " TARGET_FMT_lu "\n", + " %d tlb_size %" HWADDR_PRIu "\n", __func__, pa, ret, prot_pmp, tlb_size); prot &= prot_pmp; -- 2.46.2 From: Thomas Huth <thuth@redhat.com> If QEMU has been configured with "--without-default-devices", the build is currently failing with: /usr/bin/ld: libqemu-riscv32-softmmu.a.p/target_riscv_cpu_helper.c.o: in function `riscv_cpu_do_interrupt': .../qemu/target/riscv/cpu_helper.c:1678:(.text+0x2214): undefined reference to `do_common_semihosting' We always want semihosting to be enabled if TCG is available, so change the "imply" statements in the Kconfig file to "select", and make sure to avoid calling into do_common_semihosting() if TCG is not available. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240906094858.718105-1-thuth@redhat.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu_helper.c | 2 ++ target/riscv/Kconfig | 4 ++-- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/target/riscv/cpu_helper.c b/target/riscv/cpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_helper.c +++ b/target/riscv/cpu_helper.c @@ -XXX,XX +XXX,XX @@ void riscv_cpu_do_interrupt(CPUState *cs) if (!async) { /* set tval to badaddr for traps with address information */ switch (cause) { +#ifdef CONFIG_TCG case RISCV_EXCP_SEMIHOST: do_common_semihosting(cs); env->pc += 4; return; +#endif case RISCV_EXCP_LOAD_GUEST_ACCESS_FAULT: case RISCV_EXCP_STORE_GUEST_AMO_ACCESS_FAULT: case RISCV_EXCP_LOAD_ADDR_MIS: diff --git a/target/riscv/Kconfig b/target/riscv/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/Kconfig +++ b/target/riscv/Kconfig @@ -XXX,XX +XXX,XX @@ config RISCV32 bool - imply ARM_COMPATIBLE_SEMIHOSTING if TCG + select ARM_COMPATIBLE_SEMIHOSTING if TCG select DEVICE_TREE # needed by boot.c config RISCV64 bool - imply ARM_COMPATIBLE_SEMIHOSTING if TCG + select ARM_COMPATIBLE_SEMIHOSTING if TCG select DEVICE_TREE # needed by boot.c -- 2.46.2 From: Tomasz Jeznach <tjeznach@rivosinc.com> The IMSIC state variable eistate[] is modified by CSR instructions within a range dedicated to the local CPU and by MMIO writes from any CPU. Access to eistate from MMIO accessors is protected by the BQL, but read-modify-write (RMW) sequences from CSRRW do not acquire the BQL, making the RMW sequence vulnerable to a race condition with MMIO access from a remote CPU. This race can manifest as missing IPI or MSI in multi-CPU systems, eg: [ 43.008092] watchdog: BUG: soft lockup - CPU#2 stuck for 27s! [kworker/u19:1:52] [ 43.011723] CPU: 2 UID: 0 PID: 52 Comm: kworker/u19:1 Not tainted 6.11.0-rc6 [ 43.013070] Workqueue: events_unbound deferred_probe_work_func [ 43.018776] [<ffffffff800b4a86>] smp_call_function_many_cond+0x190/0x5c2 [ 43.019205] [<ffffffff800b4f28>] on_each_cpu_cond_mask+0x20/0x32 [ 43.019447] [<ffffffff8001069a>] __flush_tlb_range+0xf2/0x190 [ 43.019683] [<ffffffff80010914>] flush_tlb_kernel_range+0x20/0x28 The interrupt line raise/lower sequence was changed to prevent a race between the evaluation of the eistate and the execution of the qemu_irq raise/lower, ensuring that the interrupt line is not incorrectly deactivated based on a stale topei check result. To avoid holding BQL all modifications of eistate are converted to atomic operations. Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <a7604e4d61068ca4d384ae2a1377e1521d4d0235.1725651699.git.tjeznach@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/intc/riscv_imsic.c | 50 +++++++++++++++++++++++++++---------------- 1 file changed, 32 insertions(+), 18 deletions(-) diff --git a/hw/intc/riscv_imsic.c b/hw/intc/riscv_imsic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/riscv_imsic.c +++ b/hw/intc/riscv_imsic.c @@ -XXX,XX +XXX,XX @@ static uint32_t riscv_imsic_topei(RISCVIMSICState *imsic, uint32_t page) (imsic->eithreshold[page] <= imsic->num_irqs)) ? imsic->eithreshold[page] : imsic->num_irqs; for (i = 1; i < max_irq; i++) { - if ((imsic->eistate[base + i] & IMSIC_EISTATE_ENPEND) == + if ((qatomic_read(&imsic->eistate[base + i]) & IMSIC_EISTATE_ENPEND) == IMSIC_EISTATE_ENPEND) { return (i << IMSIC_TOPEI_IID_SHIFT) | i; } @@ -XXX,XX +XXX,XX @@ static uint32_t riscv_imsic_topei(RISCVIMSICState *imsic, uint32_t page) static void riscv_imsic_update(RISCVIMSICState *imsic, uint32_t page) { + uint32_t base = page * imsic->num_irqs; + + /* + * Lower the interrupt line if necessary, then evaluate the current + * IMSIC state. + * This sequence ensures that any race between evaluating the eistate and + * updating the interrupt line will not result in an incorrectly + * deactivated connected CPU IRQ line. + * If multiple interrupts are pending, this sequence functions identically + * to qemu_irq_pulse. + */ + + if (qatomic_fetch_and(&imsic->eistate[base], ~IMSIC_EISTATE_ENPEND)) { + qemu_irq_lower(imsic->external_irqs[page]); + } if (imsic->eidelivery[page] && riscv_imsic_topei(imsic, page)) { qemu_irq_raise(imsic->external_irqs[page]); - } else { - qemu_irq_lower(imsic->external_irqs[page]); + qatomic_or(&imsic->eistate[base], IMSIC_EISTATE_ENPEND); } } @@ -XXX,XX +XXX,XX @@ static int riscv_imsic_topei_rmw(RISCVIMSICState *imsic, uint32_t page, topei >>= IMSIC_TOPEI_IID_SHIFT; base = page * imsic->num_irqs; if (topei) { - imsic->eistate[base + topei] &= ~IMSIC_EISTATE_PENDING; + qatomic_and(&imsic->eistate[base + topei], ~IMSIC_EISTATE_PENDING); } - - riscv_imsic_update(imsic, page); } + riscv_imsic_update(imsic, page); return 0; } @@ -XXX,XX +XXX,XX @@ static int riscv_imsic_eix_rmw(RISCVIMSICState *imsic, uint32_t num, bool pend, target_ulong *val, target_ulong new_val, target_ulong wr_mask) { - uint32_t i, base; + uint32_t i, base, prev; target_ulong mask; uint32_t state = (pend) ? IMSIC_EISTATE_PENDING : IMSIC_EISTATE_ENABLED; @@ -XXX,XX +XXX,XX @@ static int riscv_imsic_eix_rmw(RISCVIMSICState *imsic, if (val) { *val = 0; - for (i = 0; i < xlen; i++) { - mask = (target_ulong)1 << i; - *val |= (imsic->eistate[base + i] & state) ? mask : 0; - } } for (i = 0; i < xlen; i++) { @@ -XXX,XX +XXX,XX @@ static int riscv_imsic_eix_rmw(RISCVIMSICState *imsic, mask = (target_ulong)1 << i; if (wr_mask & mask) { if (new_val & mask) { - imsic->eistate[base + i] |= state; + prev = qatomic_fetch_or(&imsic->eistate[base + i], state); } else { - imsic->eistate[base + i] &= ~state; + prev = qatomic_fetch_and(&imsic->eistate[base + i], ~state); } + } else { + prev = qatomic_read(&imsic->eistate[base + i]); + } + if (val && (prev & state)) { + *val |= mask; } } @@ -XXX,XX +XXX,XX @@ static void riscv_imsic_write(void *opaque, hwaddr addr, uint64_t value, page = addr >> IMSIC_MMIO_PAGE_SHIFT; if ((addr & (IMSIC_MMIO_PAGE_SZ - 1)) == IMSIC_MMIO_PAGE_LE) { if (value && (value < imsic->num_irqs)) { - imsic->eistate[(page * imsic->num_irqs) + value] |= - IMSIC_EISTATE_PENDING; + qatomic_or(&imsic->eistate[(page * imsic->num_irqs) + value], + IMSIC_EISTATE_PENDING); + + /* Update CPU external interrupt status */ + riscv_imsic_update(imsic, page); } } - /* Update CPU external interrupt status */ - riscv_imsic_update(imsic, page); - return; err: -- 2.46.2 From: Mark Corbin <mark@dibsco.co.uk> Added the initial implementation for RISC-V CPU initialization and main loop. This includes setting up the general-purpose registers and program counter based on the provided target architecture definitions. Signed-off-by: Mark Corbin <mark@dibsco.co.uk> Signed-off-by: Ajeet Singh <itachis@FreeBSD.org> Co-authored-by: Jessica Clarke <jrtc27@jrtc27.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20240916155119.14610-2-itachis@FreeBSD.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- bsd-user/riscv/target_arch_cpu.h | 40 ++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) create mode 100644 bsd-user/riscv/target_arch_cpu.h diff --git a/bsd-user/riscv/target_arch_cpu.h b/bsd-user/riscv/target_arch_cpu.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/bsd-user/riscv/target_arch_cpu.h @@ -XXX,XX +XXX,XX @@ +/* + * RISC-V CPU init and loop + * + * Copyright (c) 2019 Mark Corbin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef TARGET_ARCH_CPU_H +#define TARGET_ARCH_CPU_H + +#include "target_arch.h" +#include "signal-common.h" + +#define TARGET_DEFAULT_CPU_MODEL "max" + +static inline void target_cpu_init(CPURISCVState *env, + struct target_pt_regs *regs) +{ + int i; + + for (i = 1; i < 32; i++) { + env->gpr[i] = regs->regs[i]; + } + + env->pc = regs->sepc; +} + +#endif /* TARGET_ARCH_CPU_H */ -- 2.46.2 From: Mark Corbin <mark@dibsco.co.uk> Implemented the RISC-V CPU execution loop, including handling various exceptions and system calls. The loop continuously executes CPU instructions,processes exceptions, and handles system calls by invoking FreeBSD syscall handlers. Signed-off-by: Mark Corbin <mark@dibsco.co.uk> Signed-off-by: Ajeet Singh <itachis@FreeBSD.org> Co-authored-by: Jessica Clarke <jrtc27@jrtc27.com> Co-authored-by: Kyle Evans <kevans@FreeBSD.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20240916155119.14610-3-itachis@FreeBSD.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- bsd-user/riscv/target_arch_cpu.h | 94 ++++++++++++++++++++++++++++++++ 1 file changed, 94 insertions(+) diff --git a/bsd-user/riscv/target_arch_cpu.h b/bsd-user/riscv/target_arch_cpu.h index XXXXXXX..XXXXXXX 100644 --- a/bsd-user/riscv/target_arch_cpu.h +++ b/bsd-user/riscv/target_arch_cpu.h @@ -XXX,XX +XXX,XX @@ static inline void target_cpu_init(CPURISCVState *env, env->pc = regs->sepc; } +static inline void target_cpu_loop(CPURISCVState *env) +{ + CPUState *cs = env_cpu(env); + int trapnr; + abi_long ret; + unsigned int syscall_num; + int32_t signo, code; + + for (;;) { + cpu_exec_start(cs); + trapnr = cpu_exec(cs); + cpu_exec_end(cs); + process_queued_cpu_work(cs); + + signo = 0; + + switch (trapnr) { + case EXCP_INTERRUPT: + /* just indicate that signals should be handled asap */ + break; + case EXCP_ATOMIC: + cpu_exec_step_atomic(cs); + break; + case RISCV_EXCP_U_ECALL: + syscall_num = env->gpr[xT0]; + env->pc += TARGET_INSN_SIZE; + /* Compare to cpu_fetch_syscall_args() in riscv/riscv/trap.c */ + if (TARGET_FREEBSD_NR___syscall == syscall_num || + TARGET_FREEBSD_NR_syscall == syscall_num) { + ret = do_freebsd_syscall(env, + env->gpr[xA0], + env->gpr[xA1], + env->gpr[xA2], + env->gpr[xA3], + env->gpr[xA4], + env->gpr[xA5], + env->gpr[xA6], + env->gpr[xA7], + 0); + } else { + ret = do_freebsd_syscall(env, + syscall_num, + env->gpr[xA0], + env->gpr[xA1], + env->gpr[xA2], + env->gpr[xA3], + env->gpr[xA4], + env->gpr[xA5], + env->gpr[xA6], + env->gpr[xA7] + ); + } + + /* + * Compare to cpu_set_syscall_retval() in + * riscv/riscv/vm_machdep.c + */ + if (ret >= 0) { + env->gpr[xA0] = ret; + env->gpr[xT0] = 0; + } else if (ret == -TARGET_ERESTART) { + env->pc -= TARGET_INSN_SIZE; + } else if (ret != -TARGET_EJUSTRETURN) { + env->gpr[xA0] = -ret; + env->gpr[xT0] = 1; + } + break; + case RISCV_EXCP_ILLEGAL_INST: + signo = TARGET_SIGILL; + code = TARGET_ILL_ILLOPC; + break; + case RISCV_EXCP_BREAKPOINT: + signo = TARGET_SIGTRAP; + code = TARGET_TRAP_BRKPT; + break; + case EXCP_DEBUG: + signo = TARGET_SIGTRAP; + code = TARGET_TRAP_BRKPT; + break; + default: + fprintf(stderr, "qemu: unhandled CPU exception " + "0x%x - aborting\n", trapnr); + cpu_dump_state(cs, stderr, 0); + abort(); + } + + if (signo) { + force_sig_fault(signo, code, env->pc); + } + + process_pending_signals(env); + } +} + #endif /* TARGET_ARCH_CPU_H */ -- 2.46.2 From: Mark Corbin <mark@dibsco.co.uk> Added functions for cloning CPU registers and resetting the CPU state for RISC-V architecture. Signed-off-by: Mark Corbin <mark@dibsco.co.uk> Signed-off-by: Ajeet Singh <itachis@FreeBSD.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20240916155119.14610-4-itachis@FreeBSD.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- bsd-user/riscv/target_arch_cpu.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/bsd-user/riscv/target_arch_cpu.h b/bsd-user/riscv/target_arch_cpu.h index XXXXXXX..XXXXXXX 100644 --- a/bsd-user/riscv/target_arch_cpu.h +++ b/bsd-user/riscv/target_arch_cpu.h @@ -XXX,XX +XXX,XX @@ static inline void target_cpu_loop(CPURISCVState *env) } } +static inline void target_cpu_clone_regs(CPURISCVState *env, target_ulong newsp) +{ + if (newsp) { + env->gpr[xSP] = newsp; + } + + env->gpr[xA0] = 0; + env->gpr[xT0] = 0; +} + +static inline void target_cpu_reset(CPUArchState *env) +{ +} + #endif /* TARGET_ARCH_CPU_H */ -- 2.46.2 From: Mark Corbin <mark@dibsco.co.uk> Included the prototype for the 'target_cpu_set_tls' function in the 'target_arch.h' header file. This function is responsible for setting the Thread Local Storage (TLS) register for RISC-V architecture. Signed-off-by: Mark Corbin <mark@dibsco.co.uk> Signed-off-by: Ajeet Singh <itachis@FreeBSD.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20240916155119.14610-5-itachis@FreeBSD.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- bsd-user/riscv/target_arch.h | 27 +++++++++++++++++++++++++++ bsd-user/riscv/target_arch_cpu.c | 29 +++++++++++++++++++++++++++++ 2 files changed, 56 insertions(+) create mode 100644 bsd-user/riscv/target_arch.h create mode 100644 bsd-user/riscv/target_arch_cpu.c diff --git a/bsd-user/riscv/target_arch.h b/bsd-user/riscv/target_arch.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/bsd-user/riscv/target_arch.h @@ -XXX,XX +XXX,XX @@ +/* + * RISC-V specific prototypes + * + * Copyright (c) 2019 Mark Corbin <mark.corbin@embecsom.com> + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2 of the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef TARGET_ARCH_H +#define TARGET_ARCH_H + +#include "qemu.h" + +void target_cpu_set_tls(CPURISCVState *env, target_ulong newtls); + +#endif /* TARGET_ARCH_H */ diff --git a/bsd-user/riscv/target_arch_cpu.c b/bsd-user/riscv/target_arch_cpu.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/bsd-user/riscv/target_arch_cpu.c @@ -XXX,XX +XXX,XX @@ +/* + * RISC-V CPU related code + * + * Copyright (c) 2019 Mark Corbin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ +#include "qemu/osdep.h" + +#include "target_arch.h" + +#define TP_OFFSET 16 + +/* Compare with cpu_set_user_tls() in riscv/riscv/vm_machdep.c */ +void target_cpu_set_tls(CPURISCVState *env, target_ulong newtls) +{ + env->gpr[xTP] = newtls + TP_OFFSET; +} -- 2.46.2 From: Mark Corbin <mark@dibsco.co.uk> Introduced RISC-V specific ELF definitions and hardware capability detection. Additionally, a function to retrieve hardware capabilities ('get_elf_hwcap') is implemented, which returns the common bits set in each CPU's ISA strings. Signed-off-by: Mark Corbin <mark@dibsco.co.uk> Signed-off-by: Ajeet Singh <itachis@FreeBSD.org> Co-authored-by: Kyle Evans <kevans@FreeBSD.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20240916155119.14610-6-itachis@FreeBSD.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- bsd-user/riscv/target_arch_elf.h | 42 ++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) create mode 100644 bsd-user/riscv/target_arch_elf.h diff --git a/bsd-user/riscv/target_arch_elf.h b/bsd-user/riscv/target_arch_elf.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/bsd-user/riscv/target_arch_elf.h @@ -XXX,XX +XXX,XX @@ +/* + * RISC-V ELF definitions + * + * Copyright (c) 2019 Mark Corbin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef TARGET_ARCH_ELF_H +#define TARGET_ARCH_ELF_H + +#define elf_check_arch(x) ((x) == EM_RISCV) +#define ELF_START_MMAP 0x80000000 +#define ELF_ET_DYN_LOAD_ADDR 0x100000 +#define ELF_CLASS ELFCLASS64 + +#define ELF_DATA ELFDATA2LSB +#define ELF_ARCH EM_RISCV + +#define ELF_HWCAP get_elf_hwcap() +static uint32_t get_elf_hwcap(void) +{ + RISCVCPU *cpu = RISCV_CPU(thread_cpu); + + return cpu->env.misa_ext_mask; +} + +#define USE_ELF_CORE_DUMP +#define ELF_EXEC_PAGESIZE 4096 + +#endif /* TARGET_ARCH_ELF_H */ -- 2.46.2 From: Mark Corbin <mark@dibsco.co.uk> Added definitions for RISC-V register structures, including general-purpose registers and floating-point registers, in 'target_arch_reg.h'. Implemented the 'target_copy_regs' function to copy register values from the CPU state to the target register structure, ensuring proper endianness handling using 'tswapreg'. Signed-off-by: Mark Corbin <mark@dibsco.co.uk> Signed-off-by: Ajeet Singh <itachis@FreeBSD.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20240916155119.14610-7-itachis@FreeBSD.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- bsd-user/riscv/target_arch_reg.h | 88 ++++++++++++++++++++++++++++++++ 1 file changed, 88 insertions(+) create mode 100644 bsd-user/riscv/target_arch_reg.h diff --git a/bsd-user/riscv/target_arch_reg.h b/bsd-user/riscv/target_arch_reg.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/bsd-user/riscv/target_arch_reg.h @@ -XXX,XX +XXX,XX @@ +/* + * RISC-V register structures + * + * Copyright (c) 2019 Mark Corbin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef TARGET_ARCH_REG_H +#define TARGET_ARCH_REG_H + +/* Compare with riscv/include/reg.h */ +typedef struct target_reg { + uint64_t ra; /* return address */ + uint64_t sp; /* stack pointer */ + uint64_t gp; /* global pointer */ + uint64_t tp; /* thread pointer */ + uint64_t t[7]; /* temporaries */ + uint64_t s[12]; /* saved registers */ + uint64_t a[8]; /* function arguments */ + uint64_t sepc; /* exception program counter */ + uint64_t sstatus; /* status register */ +} target_reg_t; + +typedef struct target_fpreg { + uint64_t fp_x[32][2]; /* Floating point registers */ + uint64_t fp_fcsr; /* Floating point control reg */ +} target_fpreg_t; + +#define tswapreg(ptr) tswapal(ptr) + +/* Compare with struct trapframe in riscv/include/frame.h */ +static inline void target_copy_regs(target_reg_t *regs, + const CPURISCVState *env) +{ + + regs->ra = tswapreg(env->gpr[1]); + regs->sp = tswapreg(env->gpr[2]); + regs->gp = tswapreg(env->gpr[3]); + regs->tp = tswapreg(env->gpr[4]); + + regs->t[0] = tswapreg(env->gpr[5]); + regs->t[1] = tswapreg(env->gpr[6]); + regs->t[2] = tswapreg(env->gpr[7]); + regs->t[3] = tswapreg(env->gpr[28]); + regs->t[4] = tswapreg(env->gpr[29]); + regs->t[5] = tswapreg(env->gpr[30]); + regs->t[6] = tswapreg(env->gpr[31]); + + regs->s[0] = tswapreg(env->gpr[8]); + regs->s[1] = tswapreg(env->gpr[9]); + regs->s[2] = tswapreg(env->gpr[18]); + regs->s[3] = tswapreg(env->gpr[19]); + regs->s[4] = tswapreg(env->gpr[20]); + regs->s[5] = tswapreg(env->gpr[21]); + regs->s[6] = tswapreg(env->gpr[22]); + regs->s[7] = tswapreg(env->gpr[23]); + regs->s[8] = tswapreg(env->gpr[24]); + regs->s[9] = tswapreg(env->gpr[25]); + regs->s[10] = tswapreg(env->gpr[26]); + regs->s[11] = tswapreg(env->gpr[27]); + + regs->a[0] = tswapreg(env->gpr[10]); + regs->a[1] = tswapreg(env->gpr[11]); + regs->a[2] = tswapreg(env->gpr[12]); + regs->a[3] = tswapreg(env->gpr[13]); + regs->a[4] = tswapreg(env->gpr[14]); + regs->a[5] = tswapreg(env->gpr[15]); + regs->a[6] = tswapreg(env->gpr[16]); + regs->a[7] = tswapreg(env->gpr[17]); + + regs->sepc = tswapreg(env->pc); +} + +#undef tswapreg + +#endif /* TARGET_ARCH_REG_H */ -- 2.46.2 From: Mark Corbin <mark@dibsco.co.uk> Implemented the 'setup_sigtramp' function for setting up the signal trampoline code in the RISC-V architecture. Signed-off-by: Mark Corbin <mark@dibsco.co.uk> Signed-off-by: Ajeet Singh <itachis@FreeBSD.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20240916155119.14610-8-itachis@FreeBSD.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- bsd-user/riscv/target_arch_sigtramp.h | 41 +++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) create mode 100644 bsd-user/riscv/target_arch_sigtramp.h diff --git a/bsd-user/riscv/target_arch_sigtramp.h b/bsd-user/riscv/target_arch_sigtramp.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/bsd-user/riscv/target_arch_sigtramp.h @@ -XXX,XX +XXX,XX @@ +/* + * RISC-V sigcode + * + * Copyright (c) 2019 Mark Corbin + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2 of the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef TARGET_ARCH_SIGTRAMP_H +#define TARGET_ARCH_SIGTRAMP_H + +/* Compare with sigcode() in riscv/riscv/locore.S */ +static inline abi_long setup_sigtramp(abi_ulong offset, unsigned sigf_uc, + unsigned sys_sigreturn) +{ + uint32_t sys_exit = TARGET_FREEBSD_NR_exit; + + uint32_t sigtramp_code[] = { + /*1*/ const_le32(0x00010513), /*mv a0, sp*/ + /*2*/ const_le32(0x00050513 + (sigf_uc << 20)), /*addi a0,a0,sigf_uc*/ + /*3*/ const_le32(0x00000293 + (sys_sigreturn << 20)),/*li t0,sys_sigreturn*/ + /*4*/ const_le32(0x00000073), /*ecall*/ + /*5*/ const_le32(0x00000293 + (sys_exit << 20)), /*li t0,sys_exit*/ + /*6*/ const_le32(0x00000073), /*ecall*/ + /*7*/ const_le32(0xFF1FF06F) /*b -16*/ + }; + + return memcpy_to_target(offset, sigtramp_code, TARGET_SZSIGCODE); +} +#endif /* TARGET_ARCH_SIGTRAMP_H */ -- 2.46.2 From: Mark Corbin <mark@dibsco.co.uk> Added the 'do_freebsd_arch_sysarch' function to emulate the 'sysarch' system call for the RISC-V architecture. Currently, this function returns '-TARGET_EOPNOTSUPP' to indicate that the operation is not supported. Signed-off-by: Mark Corbin <mark@dibsco.co.uk> Signed-off-by: Ajeet Singh <itachis@FreeBSD.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20240916155119.14610-9-itachis@FreeBSD.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- bsd-user/riscv/target_arch_sysarch.h | 41 ++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) create mode 100644 bsd-user/riscv/target_arch_sysarch.h diff --git a/bsd-user/riscv/target_arch_sysarch.h b/bsd-user/riscv/target_arch_sysarch.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/bsd-user/riscv/target_arch_sysarch.h @@ -XXX,XX +XXX,XX @@ +/* + * RISC-V sysarch() system call emulation + * + * Copyright (c) 2019 Mark Corbin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef TARGET_ARCH_SYSARCH_H +#define TARGET_ARCH_SYSARCH_H + +#include "target_syscall.h" +#include "target_arch.h" + +static inline abi_long do_freebsd_arch_sysarch(CPURISCVState *env, int op, + abi_ulong parms) +{ + + return -TARGET_EOPNOTSUPP; +} + +static inline void do_freebsd_arch_print_sysarch( + const struct syscallname *name, abi_long arg1, abi_long arg2, + abi_long arg3, abi_long arg4, abi_long arg5, abi_long arg6) +{ + + gemu_log("UNKNOWN OP: %d, " TARGET_ABI_FMT_lx ")", (int)arg1, arg2); +} + +#endif /* TARGET_ARCH_SYSARCH_H */ -- 2.46.2 From: Mark Corbin <mark@dibsco.co.uk> Implemented functions for setting up and initializing threads in the RISC-V architecture. The 'target_thread_set_upcall' function sets up the stack pointer, program counter, and function argument for new threads. The 'target_thread_init' function initializes thread registers based on the provided image information. Signed-off-by: Mark Corbin <mark@dibsco.co.uk> Signed-off-by: Ajeet Singh <itachis@FreeBSD.org> Co-authored-by: Jessica Clarke <jrtc27@jrtc27.com> Co-authored-by: Kyle Evans <kevans@FreeBSD.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20240916155119.14610-10-itachis@FreeBSD.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- bsd-user/riscv/target_arch_thread.h | 47 +++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+) create mode 100644 bsd-user/riscv/target_arch_thread.h diff --git a/bsd-user/riscv/target_arch_thread.h b/bsd-user/riscv/target_arch_thread.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/bsd-user/riscv/target_arch_thread.h @@ -XXX,XX +XXX,XX @@ +/* + * RISC-V thread support + * + * Copyright (c) 2019 Mark Corbin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef TARGET_ARCH_THREAD_H +#define TARGET_ARCH_THREAD_H + +/* Compare with cpu_set_upcall() in riscv/riscv/vm_machdep.c */ +static inline void target_thread_set_upcall(CPURISCVState *regs, + abi_ulong entry, abi_ulong arg, abi_ulong stack_base, + abi_ulong stack_size) +{ + abi_ulong sp; + + sp = ROUND_DOWN(stack_base + stack_size, 16); + + regs->gpr[xSP] = sp; + regs->pc = entry; + regs->gpr[xA0] = arg; +} + +/* Compare with exec_setregs() in riscv/riscv/machdep.c */ +static inline void target_thread_init(struct target_pt_regs *regs, + struct image_info *infop) +{ + regs->sepc = infop->entry; + regs->regs[xRA] = infop->entry; + regs->regs[xA0] = infop->start_stack; + regs->regs[xSP] = ROUND_DOWN(infop->start_stack, 16); +} + +#endif /* TARGET_ARCH_THREAD_H */ -- 2.46.2 From: Mark Corbin <mark@dibsco.co.uk> Added definitions for RISC-V VM parameters, including maximum and default sizes for text, data, and stack, as well as address space limits. Implemented helper functions for retrieving and setting specific values in the CPU state, such as stack pointer and return values. Signed-off-by: Mark Corbin <mark@dibsco.co.uk> Signed-off-by: Ajeet Singh <itachis@FreeBSD.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20240916155119.14610-11-itachis@FreeBSD.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- bsd-user/riscv/target_arch_vmparam.h | 53 ++++++++++++++++++++++++++++ 1 file changed, 53 insertions(+) create mode 100644 bsd-user/riscv/target_arch_vmparam.h diff --git a/bsd-user/riscv/target_arch_vmparam.h b/bsd-user/riscv/target_arch_vmparam.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/bsd-user/riscv/target_arch_vmparam.h @@ -XXX,XX +XXX,XX @@ +/* + * RISC-V VM parameters definitions + * + * Copyright (c) 2019 Mark Corbin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef TARGET_ARCH_VMPARAM_H +#define TARGET_ARCH_VMPARAM_H + +#include "cpu.h" + +/* Compare with riscv/include/vmparam.h */ +#define TARGET_MAXTSIZ (1 * GiB) /* max text size */ +#define TARGET_DFLDSIZ (128 * MiB) /* initial data size limit */ +#define TARGET_MAXDSIZ (1 * GiB) /* max data size */ +#define TARGET_DFLSSIZ (128 * MiB) /* initial stack size limit */ +#define TARGET_MAXSSIZ (1 * GiB) /* max stack size */ +#define TARGET_SGROWSIZ (128 * KiB) /* amount to grow stack */ + +#define TARGET_VM_MINUSER_ADDRESS (0x0000000000000000UL) +#define TARGET_VM_MAXUSER_ADDRESS (0x0000004000000000UL) + +#define TARGET_USRSTACK (TARGET_VM_MAXUSER_ADDRESS - TARGET_PAGE_SIZE) + +static inline abi_ulong get_sp_from_cpustate(CPURISCVState *state) +{ + return state->gpr[xSP]; +} + +static inline void set_second_rval(CPURISCVState *state, abi_ulong retval2) +{ + state->gpr[xA1] = retval2; +} + +static inline abi_ulong get_second_rval(CPURISCVState *state) +{ + return state->gpr[xA1]; +} + +#endif /* TARGET_ARCH_VMPARAM_H */ -- 2.46.2 From: Mark Corbin <mark@dibsco.co.uk> Introduced definitions for the RISC-V system call interface, including the 'target_pt_regs' structure that outlines the register storage layout during a system call. Added constants for hardware machine identifiers. Signed-off-by: Mark Corbin <mark@dibsco.co.uk> Signed-off-by: Ajeet Singh <itachis@FreeBSD.org> Co-authored-by: Jessica Clarke <jrtc27@jrtc27.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20240916155119.14610-12-itachis@FreeBSD.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- bsd-user/riscv/target_syscall.h | 38 +++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) create mode 100644 bsd-user/riscv/target_syscall.h diff --git a/bsd-user/riscv/target_syscall.h b/bsd-user/riscv/target_syscall.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/bsd-user/riscv/target_syscall.h @@ -XXX,XX +XXX,XX @@ +/* + * RISC-V system call definitions + * + * Copyright (c) Mark Corbin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef BSD_USER_RISCV_TARGET_SYSCALL_H +#define BSD_USER_RISCV_TARGET_SYSCALL_H + +/* + * struct target_pt_regs defines the way the registers are stored on the stack + * during a system call. + */ + +struct target_pt_regs { + abi_ulong regs[32]; + abi_ulong sepc; +}; + +#define UNAME_MACHINE "riscv64" + +#define TARGET_HW_MACHINE "riscv" +#define TARGET_HW_MACHINE_ARCH UNAME_MACHINE + +#endif /* BSD_USER_RISCV_TARGET_SYSCALL_H */ -- 2.46.2 From: Warner Losh <imp@bsdimp.com> Added a generic definition for RISC-V64 target-specific details. Implemented the 'regpairs_aligned' function,which returns 'false' to indicate that register pairs are not aligned in the RISC-V64 ABI. Signed-off-by: Warner Losh <imp@bsdimp.com> Signed-off-by: Ajeet Singh <itachis@FreeBSD.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20240916155119.14610-13-itachis@FreeBSD.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- bsd-user/riscv/target.h | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) create mode 100644 bsd-user/riscv/target.h diff --git a/bsd-user/riscv/target.h b/bsd-user/riscv/target.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/bsd-user/riscv/target.h @@ -XXX,XX +XXX,XX @@ +/* + * Riscv64 general target stuff that's common to all aarch details + * + * Copyright (c) 2022 M. Warner Losh <imp@bsdimp.com> + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#ifndef TARGET_H +#define TARGET_H + +/* + * riscv64 ABI does not 'lump' the registers for 64-bit args. + */ +static inline bool regpairs_aligned(void *cpu_env) +{ + return false; +} + +#endif /* TARGET_H */ -- 2.46.2 From: Mark Corbin <mark@dibsco.co.uk> Added definitions for RISC-V signal handling, including structures and constants for managing signal frames and context Signed-off-by: Mark Corbin <mark@dibsco.co.uk> Signed-off-by: Ajeet Singh <itachis@FreeBSD.org> Co-authored-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20240916155119.14610-14-itachis@FreeBSD.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- bsd-user/riscv/target_arch_signal.h | 75 +++++++++++++++++++++++++++++ 1 file changed, 75 insertions(+) create mode 100644 bsd-user/riscv/target_arch_signal.h diff --git a/bsd-user/riscv/target_arch_signal.h b/bsd-user/riscv/target_arch_signal.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/bsd-user/riscv/target_arch_signal.h @@ -XXX,XX +XXX,XX @@ +/* + * RISC-V signal definitions + * + * Copyright (c) 2019 Mark Corbin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef TARGET_ARCH_SIGNAL_H +#define TARGET_ARCH_SIGNAL_H + +#include "cpu.h" + + +#define TARGET_INSN_SIZE 4 /* riscv instruction size */ + +/* Size of the signal trampoline code placed on the stack. */ +#define TARGET_SZSIGCODE ((abi_ulong)(7 * TARGET_INSN_SIZE)) + +/* Compare with riscv/include/_limits.h */ +#define TARGET_MINSIGSTKSZ (1024 * 4) +#define TARGET_SIGSTKSZ (TARGET_MINSIGSTKSZ + 32768) + +struct target_gpregs { + uint64_t gp_ra; + uint64_t gp_sp; + uint64_t gp_gp; + uint64_t gp_tp; + uint64_t gp_t[7]; + uint64_t gp_s[12]; + uint64_t gp_a[8]; + uint64_t gp_sepc; + uint64_t gp_sstatus; +}; + +struct target_fpregs { + uint64_t fp_x[32][2]; + uint64_t fp_fcsr; + uint32_t fp_flags; + uint32_t pad; +}; + +typedef struct target_mcontext { + struct target_gpregs mc_gpregs; + struct target_fpregs mc_fpregs; + uint32_t mc_flags; +#define TARGET_MC_FP_VALID 0x01 + uint32_t mc_pad; + uint64_t mc_spare[8]; +} target_mcontext_t; + +#define TARGET_MCONTEXT_SIZE 864 +#define TARGET_UCONTEXT_SIZE 936 + +#include "target_os_ucontext.h" + +struct target_sigframe { + target_ucontext_t sf_uc; /* = *sf_uncontext */ + target_siginfo_t sf_si; /* = *sf_siginfo (SA_SIGINFO case)*/ +}; + +#define TARGET_SIGSTACK_ALIGN 16 + +#endif /* TARGET_ARCH_SIGNAL_H */ -- 2.46.2 From: Mark Corbin <mark@dibsco.co.uk> Added functions for setting up the RISC-V signal trampoline and signal frame: 'set_sigtramp_args()': Configures the RISC-V CPU state with arguments for the signal handler. It sets up the registers with the signal number,pointers to the signal info and user context, the signal handler address, and the signal frame pointer. 'setup_sigframe_arch()': Initializes the signal frame with the current machine context.This function copies the context from the CPU state to the signal frame, preparing it for the signal handler. Signed-off-by: Mark Corbin <mark@dibsco.co.uk> Signed-off-by: Ajeet Singh <itachis@FreeBSD.org> Signed-off-by: Warner Losh <imp@bsdimp.com> Co-authored-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20240916155119.14610-15-itachis@FreeBSD.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- bsd-user/riscv/signal.c | 63 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 63 insertions(+) create mode 100644 bsd-user/riscv/signal.c diff --git a/bsd-user/riscv/signal.c b/bsd-user/riscv/signal.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/bsd-user/riscv/signal.c @@ -XXX,XX +XXX,XX @@ +/* + * RISC-V signal definitions + * + * Copyright (c) 2019 Mark Corbin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ +#include "qemu/osdep.h" + +#include "qemu.h" + +/* + * Compare with sendsig() in riscv/riscv/exec_machdep.c + * Assumes that target stack frame memory is locked. + */ +abi_long +set_sigtramp_args(CPURISCVState *regs, int sig, struct target_sigframe *frame, + abi_ulong frame_addr, struct target_sigaction *ka) +{ + /* + * Arguments to signal handler: + * a0 (10) = signal number + * a1 (11) = siginfo pointer + * a2 (12) = ucontext pointer + * pc = signal pointer handler + * sp (2) = sigframe pointer + * ra (1) = sigtramp at base of user stack + */ + + regs->gpr[xA0] = sig; + regs->gpr[xA1] = frame_addr + + offsetof(struct target_sigframe, sf_si); + regs->gpr[xA2] = frame_addr + + offsetof(struct target_sigframe, sf_uc); + regs->pc = ka->_sa_handler; + regs->gpr[xSP] = frame_addr; + regs->gpr[xRA] = TARGET_PS_STRINGS - TARGET_SZSIGCODE; + return 0; +} + +/* + * Compare to riscv/riscv/exec_machdep.c sendsig() + * Assumes that the memory is locked if frame points to user memory. + */ +abi_long setup_sigframe_arch(CPURISCVState *env, abi_ulong frame_addr, + struct target_sigframe *frame, int flags) +{ + target_mcontext_t *mcp = &frame->sf_uc.uc_mcontext; + + get_mcontext(env, mcp, flags); + return 0; +} -- 2.46.2 From: Mark Corbin <mark@dibsco.co.uk> Added the 'get_mcontext' function to extract and populate the RISC-V machine context from the CPU state. This function is used to gather the current state of the general-purpose registers and store it in a 'target_mcontext_' structure. Signed-off-by: Mark Corbin <mark@dibsco.co.uk> Signed-off-by: Ajeet Singh <itachis@FreeBSD.org> Signed-off-by: Warner Losh <imp@bsdimp.com> Co-authored-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20240916155119.14610-16-itachis@FreeBSD.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- bsd-user/riscv/signal.c | 53 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 53 insertions(+) diff --git a/bsd-user/riscv/signal.c b/bsd-user/riscv/signal.c index XXXXXXX..XXXXXXX 100644 --- a/bsd-user/riscv/signal.c +++ b/bsd-user/riscv/signal.c @@ -XXX,XX +XXX,XX @@ abi_long setup_sigframe_arch(CPURISCVState *env, abi_ulong frame_addr, get_mcontext(env, mcp, flags); return 0; } + +/* + * Compare with get_mcontext() in riscv/riscv/machdep.c + * Assumes that the memory is locked if mcp points to user memory. + */ +abi_long get_mcontext(CPURISCVState *regs, target_mcontext_t *mcp, + int flags) +{ + + mcp->mc_gpregs.gp_t[0] = tswap64(regs->gpr[5]); + mcp->mc_gpregs.gp_t[1] = tswap64(regs->gpr[6]); + mcp->mc_gpregs.gp_t[2] = tswap64(regs->gpr[7]); + mcp->mc_gpregs.gp_t[3] = tswap64(regs->gpr[28]); + mcp->mc_gpregs.gp_t[4] = tswap64(regs->gpr[29]); + mcp->mc_gpregs.gp_t[5] = tswap64(regs->gpr[30]); + mcp->mc_gpregs.gp_t[6] = tswap64(regs->gpr[31]); + + mcp->mc_gpregs.gp_s[0] = tswap64(regs->gpr[8]); + mcp->mc_gpregs.gp_s[1] = tswap64(regs->gpr[9]); + mcp->mc_gpregs.gp_s[2] = tswap64(regs->gpr[18]); + mcp->mc_gpregs.gp_s[3] = tswap64(regs->gpr[19]); + mcp->mc_gpregs.gp_s[4] = tswap64(regs->gpr[20]); + mcp->mc_gpregs.gp_s[5] = tswap64(regs->gpr[21]); + mcp->mc_gpregs.gp_s[6] = tswap64(regs->gpr[22]); + mcp->mc_gpregs.gp_s[7] = tswap64(regs->gpr[23]); + mcp->mc_gpregs.gp_s[8] = tswap64(regs->gpr[24]); + mcp->mc_gpregs.gp_s[9] = tswap64(regs->gpr[25]); + mcp->mc_gpregs.gp_s[10] = tswap64(regs->gpr[26]); + mcp->mc_gpregs.gp_s[11] = tswap64(regs->gpr[27]); + + mcp->mc_gpregs.gp_a[0] = tswap64(regs->gpr[10]); + mcp->mc_gpregs.gp_a[1] = tswap64(regs->gpr[11]); + mcp->mc_gpregs.gp_a[2] = tswap64(regs->gpr[12]); + mcp->mc_gpregs.gp_a[3] = tswap64(regs->gpr[13]); + mcp->mc_gpregs.gp_a[4] = tswap64(regs->gpr[14]); + mcp->mc_gpregs.gp_a[5] = tswap64(regs->gpr[15]); + mcp->mc_gpregs.gp_a[6] = tswap64(regs->gpr[16]); + mcp->mc_gpregs.gp_a[7] = tswap64(regs->gpr[17]); + + if (flags & TARGET_MC_GET_CLEAR_RET) { + mcp->mc_gpregs.gp_a[0] = 0; /* a0 */ + mcp->mc_gpregs.gp_a[1] = 0; /* a1 */ + mcp->mc_gpregs.gp_t[0] = 0; /* clear syscall error */ + } + + mcp->mc_gpregs.gp_ra = tswap64(regs->gpr[1]); + mcp->mc_gpregs.gp_sp = tswap64(regs->gpr[2]); + mcp->mc_gpregs.gp_gp = tswap64(regs->gpr[3]); + mcp->mc_gpregs.gp_tp = tswap64(regs->gpr[4]); + mcp->mc_gpregs.gp_sepc = tswap64(regs->pc); + + return 0; +} -- 2.46.2 From: Mark Corbin <mark@dibsco.co.uk> Added implementations for 'set_mcontext' and 'get_ucontext_sigreturn' functions for RISC-V architecture, Both functions ensure that the CPU state and user context are properly managed. Signed-off-by: Mark Corbin <mark@dibsco.co.uk> Signed-off-by: Warner Losh <imp@bsdimp.com> Signed-off-by: Ajeet Singh <itachis@FreeBSD.org> Co-authored-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20240916155119.14610-17-itachis@FreeBSD.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- bsd-user/riscv/signal.c | 54 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 54 insertions(+) diff --git a/bsd-user/riscv/signal.c b/bsd-user/riscv/signal.c index XXXXXXX..XXXXXXX 100644 --- a/bsd-user/riscv/signal.c +++ b/bsd-user/riscv/signal.c @@ -XXX,XX +XXX,XX @@ abi_long get_mcontext(CPURISCVState *regs, target_mcontext_t *mcp, return 0; } + +/* Compare with set_mcontext() in riscv/riscv/exec_machdep.c */ +abi_long set_mcontext(CPURISCVState *regs, target_mcontext_t *mcp, + int srflag) +{ + + regs->gpr[5] = tswap64(mcp->mc_gpregs.gp_t[0]); + regs->gpr[6] = tswap64(mcp->mc_gpregs.gp_t[1]); + regs->gpr[7] = tswap64(mcp->mc_gpregs.gp_t[2]); + regs->gpr[28] = tswap64(mcp->mc_gpregs.gp_t[3]); + regs->gpr[29] = tswap64(mcp->mc_gpregs.gp_t[4]); + regs->gpr[30] = tswap64(mcp->mc_gpregs.gp_t[5]); + regs->gpr[31] = tswap64(mcp->mc_gpregs.gp_t[6]); + + regs->gpr[8] = tswap64(mcp->mc_gpregs.gp_s[0]); + regs->gpr[9] = tswap64(mcp->mc_gpregs.gp_s[1]); + regs->gpr[18] = tswap64(mcp->mc_gpregs.gp_s[2]); + regs->gpr[19] = tswap64(mcp->mc_gpregs.gp_s[3]); + regs->gpr[20] = tswap64(mcp->mc_gpregs.gp_s[4]); + regs->gpr[21] = tswap64(mcp->mc_gpregs.gp_s[5]); + regs->gpr[22] = tswap64(mcp->mc_gpregs.gp_s[6]); + regs->gpr[23] = tswap64(mcp->mc_gpregs.gp_s[7]); + regs->gpr[24] = tswap64(mcp->mc_gpregs.gp_s[8]); + regs->gpr[25] = tswap64(mcp->mc_gpregs.gp_s[9]); + regs->gpr[26] = tswap64(mcp->mc_gpregs.gp_s[10]); + regs->gpr[27] = tswap64(mcp->mc_gpregs.gp_s[11]); + + regs->gpr[10] = tswap64(mcp->mc_gpregs.gp_a[0]); + regs->gpr[11] = tswap64(mcp->mc_gpregs.gp_a[1]); + regs->gpr[12] = tswap64(mcp->mc_gpregs.gp_a[2]); + regs->gpr[13] = tswap64(mcp->mc_gpregs.gp_a[3]); + regs->gpr[14] = tswap64(mcp->mc_gpregs.gp_a[4]); + regs->gpr[15] = tswap64(mcp->mc_gpregs.gp_a[5]); + regs->gpr[16] = tswap64(mcp->mc_gpregs.gp_a[6]); + regs->gpr[17] = tswap64(mcp->mc_gpregs.gp_a[7]); + + + regs->gpr[1] = tswap64(mcp->mc_gpregs.gp_ra); + regs->gpr[2] = tswap64(mcp->mc_gpregs.gp_sp); + regs->gpr[3] = tswap64(mcp->mc_gpregs.gp_gp); + regs->gpr[4] = tswap64(mcp->mc_gpregs.gp_tp); + regs->pc = tswap64(mcp->mc_gpregs.gp_sepc); + + return 0; +} + +/* Compare with sys_sigreturn() in riscv/riscv/machdep.c */ +abi_long get_ucontext_sigreturn(CPURISCVState *regs, + abi_ulong target_sf, abi_ulong *target_uc) +{ + + *target_uc = target_sf; + return 0; +} -- 2.46.2 From: Warner Losh <imp@bsdimp.com> Added configuration for RISC-V 64-bit target to the build system. Signed-off-by: Warner Losh <imp@bsdimp.com> Signed-off-by: Ajeet Singh <itachis@FreeBSD.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20240916155119.14610-18-itachis@FreeBSD.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- configs/targets/riscv64-bsd-user.mak | 4 ++++ 1 file changed, 4 insertions(+) create mode 100644 configs/targets/riscv64-bsd-user.mak diff --git a/configs/targets/riscv64-bsd-user.mak b/configs/targets/riscv64-bsd-user.mak new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/configs/targets/riscv64-bsd-user.mak @@ -XXX,XX +XXX,XX @@ +TARGET_ARCH=riscv64 +TARGET_BASE_ARCH=riscv +TARGET_ABI_DIR=riscv +TARGET_XML_FILES= gdb-xml/riscv-64bit-cpu.xml gdb-xml/riscv-32bit-fpu.xml gdb-xml/riscv-64bit-fpu.xml gdb-xml/riscv-64bit-virtual.xml -- 2.46.2