Series comparison

Hi; here's a target-arm pullreq for rc0; these are all bugfixes
and similar minor stuff.

thanks
-- PMM

The following changes since commit 0462a32b4f63b2448b4a196381138afd50719dc4:

Merge tag 'for-upstream' of https://repo.or.cz/qemu/kevin into staging (2025-03-14 09:31:13 +0800)

are available in the Git repository at:

https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20250314-1

for you to fetch changes up to a019e15edfd62beae1e2f6adc0fa7415ba20b14c:

meson.build: Set RUST_BACKTRACE for all tests (2025-03-14 12:54:33 +0000)

----------------------------------------------------------------
target-arm queue:
 * Correctly handle corner cases of guest attempting an exception
   return to AArch32 when target EL is AArch64 only
 * MAINTAINERS: Fix status for Arm boards I "maintain"
 * tests/functional: Bump up arm_replay timeout
 * Revert "hw/char/pl011: Warn when using disabled receiver"
 * util/cacheflush: Make first DSB unconditional on aarch64
 * target/arm: Fix SVE/SME access check logic
 * meson.build: Set RUST_BACKTRACE for all tests

----------------------------------------------------------------
Joe Komlodi (1):
      util/cacheflush: Make first DSB unconditional on aarch64

Paolo Bonzini (1):
      Revert "hw/char/pl011: Warn when using disabled receiver"

Peter Maydell (13):
      target/arm: Move A32_BANKED_REG_{GET,SET} macros to cpregs.h
      target/arm: Un-inline access_secure_reg()
      linux-user/aarch64: Remove unused get/put_user macros
      linux-user/arm: Remove unused get_put_user macros
      target/arm: Move arm_cpu_data_is_big_endian() etc to internals.h
      target/arm: Move arm_current_el() and arm_el_is_aa64() to internals.h
      target/arm: SCR_EL3.RW should be treated as 1 if EL2 doesn't support AArch32
      target/arm: HCR_EL2.RW should be RAO/WI if EL1 doesn't support AArch32
      target/arm: Add cpu local variable to exception_return helper
      target/arm: Forbid return to AArch32 when CPU is AArch64-only
      MAINTAINERS: Fix status for Arm boards I "maintain"
      tests/functional: Bump up arm_replay timeout
      meson.build: Set RUST_BACKTRACE for all tests

Richard Henderson (2):
      target/arm: Make DisasContext.{fp, sve}_access_checked tristate
      target/arm: Simplify pstate_sm check in sve_access_check

The A32_BANKED_REG_{GET,SET} macros are only used inside target/arm;
move their definitions to cpregs.h. There's no need to have them
defined in all the code that includes cpu.h.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
---
 target/arm/cpregs.h | 28 ++++++++++++++++++++++++++++
 target/arm/cpu.h    | 27 ---------------------------
 2 files changed, 28 insertions(+), 27 deletions(-)

diff --git a/target/arm/cpregs.h b/target/arm/cpregs.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpregs.h
+++ b/target/arm/cpregs.h
@@ -XXX,XX +XXX,XX @@ static inline bool arm_cpreg_traps_in_nv(const ARMCPRegInfo *ri)
     return ri->opc1 == 4 || ri->opc1 == 5;
 }
 
+/* Macros for accessing a specified CP register bank */
+#define A32_BANKED_REG_GET(_env, _regname, _secure)                     \
+    ((_secure) ? (_env)->cp15._regname##_s : (_env)->cp15._regname##_ns)
+
+#define A32_BANKED_REG_SET(_env, _regname, _secure, _val)       \
+    do {                                                        \
+        if (_secure) {                                          \
+            (_env)->cp15._regname##_s = (_val);                 \
+        } else {                                                \
+            (_env)->cp15._regname##_ns = (_val);                \
+        }                                                       \
+    } while (0)
+
+/*
+ * Macros for automatically accessing a specific CP register bank depending on
+ * the current secure state of the system.  These macros are not intended for
+ * supporting instruction translation reads/writes as these are dependent
+ * solely on the SCR.NS bit and not the mode.
+ */
+#define A32_BANKED_CURRENT_REG_GET(_env, _regname)                          \
+    A32_BANKED_REG_GET((_env), _regname,                                    \
+                       (arm_is_secure(_env) && !arm_el_is_aa64((_env), 3)))
+
+#define A32_BANKED_CURRENT_REG_SET(_env, _regname, _val)                    \
+    A32_BANKED_REG_SET((_env), _regname,                                    \
+                       (arm_is_secure(_env) && !arm_el_is_aa64((_env), 3)), \
+                       (_val))
+
 #endif /* TARGET_ARM_CPREGS_H */
diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -XXX,XX +XXX,XX @@ static inline bool access_secure_reg(CPUARMState *env)
     return ret;
 }
 
-/* Macros for accessing a specified CP register bank */
-#define A32_BANKED_REG_GET(_env, _regname, _secure)    \
-    ((_secure) ? (_env)->cp15._regname##_s : (_env)->cp15._regname##_ns)
-
-#define A32_BANKED_REG_SET(_env, _regname, _secure, _val)   \
-    do {                                                \
-        if (_secure) {                                   \
-            (_env)->cp15._regname##_s = (_val);            \
-        } else {                                        \
-            (_env)->cp15._regname##_ns = (_val);           \
-        }                                               \
-    } while (0)
-
-/* Macros for automatically accessing a specific CP register bank depending on
- * the current secure state of the system.  These macros are not intended for
- * supporting instruction translation reads/writes as these are dependent
- * solely on the SCR.NS bit and not the mode.
- */
-#define A32_BANKED_CURRENT_REG_GET(_env, _regname)        \
-    A32_BANKED_REG_GET((_env), _regname,                \
-                       (arm_is_secure(_env) && !arm_el_is_aa64((_env), 3)))
-
-#define A32_BANKED_CURRENT_REG_SET(_env, _regname, _val)                       \
-    A32_BANKED_REG_SET((_env), _regname,                                    \
-                       (arm_is_secure(_env) && !arm_el_is_aa64((_env), 3)), \
-                       (_val))
-
 uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx,
                                  uint32_t cur_el, bool secure);
 
-- 
2.43.0

We would like to move arm_el_is_aa64() to internals.h; however, it is
used by access_secure_reg().  Make that function not be inline, so
that it can stay in cpu.h.

access_secure_reg() is used only in two places:
 * in hflags.c
 * in the user-mode arm emulators, to decide whether to store
   the TLS value in the secure or non-secure banked field

The second of these is not on a super-hot path that would care about
the inlining (and incidentally will always use the NS banked field
because our user-mode CPUs never set ARM_FEATURE_EL3); put the
definition of access_secure_reg() in hflags.c, near its only use
inside target/arm.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
---
 target/arm/cpu.h        | 12 +++---------
 target/arm/tcg/hflags.c |  9 +++++++++
 2 files changed, 12 insertions(+), 9 deletions(-)

diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -XXX,XX +XXX,XX @@ static inline bool arm_el_is_aa64(CPUARMState *env, int el)
     return aa64;
 }
 
-/* Function for determining whether guest cp register reads and writes should
+/*
+ * Function for determining whether guest cp register reads and writes should
  * access the secure or non-secure bank of a cp register.  When EL3 is
  * operating in AArch32 state, the NS-bit determines whether the secure
  * instance of a cp register should be used. When EL3 is AArch64 (or if
  * it doesn't exist at all) then there is no register banking, and all
  * accesses are to the non-secure version.
  */
-static inline bool access_secure_reg(CPUARMState *env)
-{
-    bool ret = (arm_feature(env, ARM_FEATURE_EL3) &&
-                !arm_el_is_aa64(env, 3) &&
-                !(env->cp15.scr_el3 & SCR_NS));
-
-    return ret;
-}
+bool access_secure_reg(CPUARMState *env);
 
 uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx,
                                  uint32_t cur_el, bool secure);
diff --git a/target/arm/tcg/hflags.c b/target/arm/tcg/hflags.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/hflags.c
+++ b/target/arm/tcg/hflags.c
@@ -XXX,XX +XXX,XX @@ static bool aprofile_require_alignment(CPUARMState *env, int el, uint64_t sctlr)
 #endif
 }
 
+bool access_secure_reg(CPUARMState *env)
+{
+    bool ret = (arm_feature(env, ARM_FEATURE_EL3) &&
+                !arm_el_is_aa64(env, 3) &&
+                !(env->cp15.scr_el3 & SCR_NS));
+
+    return ret;
+}
+
 static CPUARMTBFlags rebuild_hflags_common(CPUARMState *env, int fp_el,
                                            ARMMMUIdx mmu_idx,
                                            CPUARMTBFlags flags)
-- 
2.43.0

At the top of linux-user/aarch64/cpu_loop.c we define a set of
macros for reading and writing data and code words, but we never
use these macros. Delete them.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
---
 linux-user/aarch64/cpu_loop.c | 48 -----------------------------------
 1 file changed, 48 deletions(-)

diff --git a/linux-user/aarch64/cpu_loop.c b/linux-user/aarch64/cpu_loop.c
index XXXXXXX..XXXXXXX 100644
--- a/linux-user/aarch64/cpu_loop.c
+++ b/linux-user/aarch64/cpu_loop.c
@@ -XXX,XX +XXX,XX @@
 #include "target/arm/syndrome.h"
 #include "target/arm/cpu-features.h"
 
-#define get_user_code_u32(x, gaddr, env)                \
-    ({ abi_long __r = get_user_u32((x), (gaddr));       \
-        if (!__r && bswap_code(arm_sctlr_b(env))) {     \
-            (x) = bswap32(x);                           \
-        }                                               \
-        __r;                                            \
-    })
-
-#define get_user_code_u16(x, gaddr, env)                \
-    ({ abi_long __r = get_user_u16((x), (gaddr));       \
-        if (!__r && bswap_code(arm_sctlr_b(env))) {     \
-            (x) = bswap16(x);                           \
-        }                                               \
-        __r;                                            \
-    })
-
-#define get_user_data_u32(x, gaddr, env)                \
-    ({ abi_long __r = get_user_u32((x), (gaddr));       \
-        if (!__r && arm_cpu_bswap_data(env)) {          \
-            (x) = bswap32(x);                           \
-        }                                               \
-        __r;                                            \
-    })
-
-#define get_user_data_u16(x, gaddr, env)                \
-    ({ abi_long __r = get_user_u16((x), (gaddr));       \
-        if (!__r && arm_cpu_bswap_data(env)) {          \
-            (x) = bswap16(x);                           \
-        }                                               \
-        __r;                                            \
-    })
-
-#define put_user_data_u32(x, gaddr, env)                \
-    ({ typeof(x) __x = (x);                             \
-        if (arm_cpu_bswap_data(env)) {                  \
-            __x = bswap32(__x);                         \
-        }                                               \
-        put_user_u32(__x, (gaddr));                     \
-    })
-
-#define put_user_data_u16(x, gaddr, env)                \
-    ({ typeof(x) __x = (x);                             \
-        if (arm_cpu_bswap_data(env)) {                  \
-            __x = bswap16(__x);                         \
-        }                                               \
-        put_user_u16(__x, (gaddr));                     \
-    })
-
 /* AArch64 main loop */
 void cpu_loop(CPUARMState *env)
 {
-- 
2.43.0

In linux-user/arm/cpu_loop.c we define a full set of get/put
macros for both code and data (since the endianness handling
is different between the two). However the only one we actually
use is get_user_code_u32(). Remove the rest.

We leave a comment noting how data-side accesses should be handled
for big-endian, because that's a subtle point and we just removed the
macros that were effectively documenting it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
---
 linux-user/arm/cpu_loop.c | 43 ++++-----------------------------------
 1 file changed, 4 insertions(+), 39 deletions(-)

diff --git a/linux-user/arm/cpu_loop.c b/linux-user/arm/cpu_loop.c
index XXXXXXX..XXXXXXX 100644
--- a/linux-user/arm/cpu_loop.c
+++ b/linux-user/arm/cpu_loop.c
@@ -XXX,XX +XXX,XX @@
         __r;                                            \
     })
 
-#define get_user_code_u16(x, gaddr, env)                \
-    ({ abi_long __r = get_user_u16((x), (gaddr));       \
-        if (!__r && bswap_code(arm_sctlr_b(env))) {     \
-            (x) = bswap16(x);                           \
-        }                                               \
-        __r;                                            \
-    })
-
-#define get_user_data_u32(x, gaddr, env)                \
-    ({ abi_long __r = get_user_u32((x), (gaddr));       \
-        if (!__r && arm_cpu_bswap_data(env)) {          \
-            (x) = bswap32(x);                           \
-        }                                               \
-        __r;                                            \
-    })
-
-#define get_user_data_u16(x, gaddr, env)                \
-    ({ abi_long __r = get_user_u16((x), (gaddr));       \
-        if (!__r && arm_cpu_bswap_data(env)) {          \
-            (x) = bswap16(x);                           \
-        }                                               \
-        __r;                                            \
-    })
-
-#define put_user_data_u32(x, gaddr, env)                \
-    ({ typeof(x) __x = (x);                             \
-        if (arm_cpu_bswap_data(env)) {                  \
-            __x = bswap32(__x);                         \
-        }                                               \
-        put_user_u32(__x, (gaddr));                     \
-    })
-
-#define put_user_data_u16(x, gaddr, env)                \
-    ({ typeof(x) __x = (x);                             \
-        if (arm_cpu_bswap_data(env)) {                  \
-            __x = bswap16(__x);                         \
-        }                                               \
-        put_user_u16(__x, (gaddr));                     \
-    })
+/*
+ * Note that if we need to do data accesses here, they should do a
+ * bswap if arm_cpu_bswap_data() returns true.
+ */
 
 /*
  * Similar to code in accel/tcg/user-exec.c, but outside the execution loop.
-- 
2.43.0

The arm_cpu_data_is_big_endian() and related functions are now used
only in target/arm; they can be moved to internals.h.

The motivation here is that we would like to move arm_current_el()
to internals.h.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
---
 target/arm/cpu.h       | 48 ------------------------------------------
 target/arm/internals.h | 48 ++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 48 insertions(+), 48 deletions(-)

diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -XXX,XX +XXX,XX @@ static inline bool arm_sctlr_b(CPUARMState *env)
 
 uint64_t arm_sctlr(CPUARMState *env, int el);
 
-static inline bool arm_cpu_data_is_big_endian_a32(CPUARMState *env,
-                                                  bool sctlr_b)
-{
-#ifdef CONFIG_USER_ONLY
-    /*
-     * In system mode, BE32 is modelled in line with the
-     * architecture (as word-invariant big-endianness), where loads
-     * and stores are done little endian but from addresses which
-     * are adjusted by XORing with the appropriate constant. So the
-     * endianness to use for the raw data access is not affected by
-     * SCTLR.B.
-     * In user mode, however, we model BE32 as byte-invariant
-     * big-endianness (because user-only code cannot tell the
-     * difference), and so we need to use a data access endianness
-     * that depends on SCTLR.B.
-     */
-    if (sctlr_b) {
-        return true;
-    }
-#endif
-    /* In 32bit endianness is determined by looking at CPSR's E bit */
-    return env->uncached_cpsr & CPSR_E;
-}
-
-static inline bool arm_cpu_data_is_big_endian_a64(int el, uint64_t sctlr)
-{
-    return sctlr & (el ? SCTLR_EE : SCTLR_E0E);
-}
-
-/* Return true if the processor is in big-endian mode. */
-static inline bool arm_cpu_data_is_big_endian(CPUARMState *env)
-{
-    if (!is_a64(env)) {
-        return arm_cpu_data_is_big_endian_a32(env, arm_sctlr_b(env));
-    } else {
-        int cur_el = arm_current_el(env);
-        uint64_t sctlr = arm_sctlr(env, cur_el);
-        return arm_cpu_data_is_big_endian_a64(cur_el, sctlr);
-    }
-}
-
 #include "exec/cpu-all.h"
 
 /*
@@ -XXX,XX +XXX,XX @@ static inline bool bswap_code(bool sctlr_b)
 #endif
 }
 
-#ifdef CONFIG_USER_ONLY
-static inline bool arm_cpu_bswap_data(CPUARMState *env)
-{
-    return TARGET_BIG_ENDIAN ^ arm_cpu_data_is_big_endian(env);
-}
-#endif
-
 void cpu_get_tb_cpu_state(CPUARMState *env, vaddr *pc,
                           uint64_t *cs_base, uint32_t *flags);
 
diff --git a/target/arm/internals.h b/target/arm/internals.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/internals.h
+++ b/target/arm/internals.h
@@ -XXX,XX +XXX,XX @@ static inline FloatRoundMode arm_rmode_to_sf(ARMFPRounding rmode)
     return arm_rmode_to_sf_map[rmode];
 }
 
+static inline bool arm_cpu_data_is_big_endian_a32(CPUARMState *env,
+                                                  bool sctlr_b)
+{
+#ifdef CONFIG_USER_ONLY
+    /*
+     * In system mode, BE32 is modelled in line with the
+     * architecture (as word-invariant big-endianness), where loads
+     * and stores are done little endian but from addresses which
+     * are adjusted by XORing with the appropriate constant. So the
+     * endianness to use for the raw data access is not affected by
+     * SCTLR.B.
+     * In user mode, however, we model BE32 as byte-invariant
+     * big-endianness (because user-only code cannot tell the
+     * difference), and so we need to use a data access endianness
+     * that depends on SCTLR.B.
+     */
+    if (sctlr_b) {
+        return true;
+    }
+#endif
+    /* In 32bit endianness is determined by looking at CPSR's E bit */
+    return env->uncached_cpsr & CPSR_E;
+}
+
+static inline bool arm_cpu_data_is_big_endian_a64(int el, uint64_t sctlr)
+{
+    return sctlr & (el ? SCTLR_EE : SCTLR_E0E);
+}
+
+/* Return true if the processor is in big-endian mode. */
+static inline bool arm_cpu_data_is_big_endian(CPUARMState *env)
+{
+    if (!is_a64(env)) {
+        return arm_cpu_data_is_big_endian_a32(env, arm_sctlr_b(env));
+    } else {
+        int cur_el = arm_current_el(env);
+        uint64_t sctlr = arm_sctlr(env, cur_el);
+        return arm_cpu_data_is_big_endian_a64(cur_el, sctlr);
+    }
+}
+
+#ifdef CONFIG_USER_ONLY
+static inline bool arm_cpu_bswap_data(CPUARMState *env)
+{
+    return TARGET_BIG_ENDIAN ^ arm_cpu_data_is_big_endian(env);
+}
+#endif
+
 static inline void aarch64_save_sp(CPUARMState *env, int el)
 {
     if (env->pstate & PSTATE_SP) {
-- 
2.43.0

The functions arm_current_el() and arm_el_is_aa64() are used only in
target/arm and in hw/intc/arm_gicv3_cpuif.c.  They're functions that
query internal state of the CPU.  Move them out of cpu.h and into
internals.h.

This means we need to include internals.h in arm_gicv3_cpuif.c, but
this is justifiable because that file is implementing the GICv3 CPU
interface, which really is part of the CPU proper; we just ended up
implementing it in code in hw/intc/ for historical reasons.

The motivation for this move is that we'd like to change
arm_el_is_aa64() to add a condition that uses cpu_isar_feature();
but we don't want to include cpu-features.h in cpu.h.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
---
 target/arm/cpu.h          | 66 --------------------------------------
 target/arm/internals.h    | 67 +++++++++++++++++++++++++++++++++++++++
 hw/intc/arm_gicv3_cpuif.c |  1 +
 target/arm/arch_dump.c    |  1 +
 4 files changed, 69 insertions(+), 66 deletions(-)

diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -XXX,XX +XXX,XX @@ uint64_t arm_hcr_el2_eff_secstate(CPUARMState *env, ARMSecuritySpace space);
 uint64_t arm_hcr_el2_eff(CPUARMState *env);
 uint64_t arm_hcrx_el2_eff(CPUARMState *env);
 
-/* Return true if the specified exception level is running in AArch64 state. */
-static inline bool arm_el_is_aa64(CPUARMState *env, int el)
-{
-    /* This isn't valid for EL0 (if we're in EL0, is_a64() is what you want,
-     * and if we're not in EL0 then the state of EL0 isn't well defined.)
-     */
-    assert(el >= 1 && el <= 3);
-    bool aa64 = arm_feature(env, ARM_FEATURE_AARCH64);
-
-    /* The highest exception level is always at the maximum supported
-     * register width, and then lower levels have a register width controlled
-     * by bits in the SCR or HCR registers.
-     */
-    if (el == 3) {
-        return aa64;
-    }
-
-    if (arm_feature(env, ARM_FEATURE_EL3) &&
-        ((env->cp15.scr_el3 & SCR_NS) || !(env->cp15.scr_el3 & SCR_EEL2))) {
-        aa64 = aa64 && (env->cp15.scr_el3 & SCR_RW);
-    }
-
-    if (el == 2) {
-        return aa64;
-    }
-
-    if (arm_is_el2_enabled(env)) {
-        aa64 = aa64 && (env->cp15.hcr_el2 & HCR_RW);
-    }
-
-    return aa64;
-}
-
 /*
  * Function for determining whether guest cp register reads and writes should
  * access the secure or non-secure bank of a cp register.  When EL3 is
@@ -XXX,XX +XXX,XX @@ static inline bool arm_v7m_is_handler_mode(CPUARMState *env)
     return env->v7m.exception != 0;
 }
 
-/* Return the current Exception Level (as per ARMv8; note that this differs
- * from the ARMv7 Privilege Level).
- */
-static inline int arm_current_el(CPUARMState *env)
-{
-    if (arm_feature(env, ARM_FEATURE_M)) {
-        return arm_v7m_is_handler_mode(env) ||
-            !(env->v7m.control[env->v7m.secure] & 1);
-    }
-
-    if (is_a64(env)) {
-        return extract32(env->pstate, 2, 2);
-    }
-
-    switch (env->uncached_cpsr & 0x1f) {
-    case ARM_CPU_MODE_USR:
-        return 0;
-    case ARM_CPU_MODE_HYP:
-        return 2;
-    case ARM_CPU_MODE_MON:
-        return 3;
-    default:
-        if (arm_is_secure(env) && !arm_el_is_aa64(env, 3)) {
-            /* If EL3 is 32-bit then all secure privileged modes run in
-             * EL3
-             */
-            return 3;
-        }
-
-        return 1;
-    }
-}
-
 /**
  * write_list_to_cpustate
  * @cpu: ARMCPU
diff --git a/target/arm/internals.h b/target/arm/internals.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/internals.h
+++ b/target/arm/internals.h
@@ -XXX,XX +XXX,XX @@ static inline FloatRoundMode arm_rmode_to_sf(ARMFPRounding rmode)
     return arm_rmode_to_sf_map[rmode];
 }
 
+/* Return true if the specified exception level is running in AArch64 state. */
+static inline bool arm_el_is_aa64(CPUARMState *env, int el)
+{
+    /*
+     * This isn't valid for EL0 (if we're in EL0, is_a64() is what you want,
+     * and if we're not in EL0 then the state of EL0 isn't well defined.)
+     */
+    assert(el >= 1 && el <= 3);
+    bool aa64 = arm_feature(env, ARM_FEATURE_AARCH64);
+
+    /*
+     * The highest exception level is always at the maximum supported
+     * register width, and then lower levels have a register width controlled
+     * by bits in the SCR or HCR registers.
+     */
+    if (el == 3) {
+        return aa64;
+    }
+
+    if (arm_feature(env, ARM_FEATURE_EL3) &&
+        ((env->cp15.scr_el3 & SCR_NS) || !(env->cp15.scr_el3 & SCR_EEL2))) {
+        aa64 = aa64 && (env->cp15.scr_el3 & SCR_RW);
+    }
+
+    if (el == 2) {
+        return aa64;
+    }
+
+    if (arm_is_el2_enabled(env)) {
+        aa64 = aa64 && (env->cp15.hcr_el2 & HCR_RW);
+    }
+
+    return aa64;
+}
+
+/*
+ * Return the current Exception Level (as per ARMv8; note that this differs
+ * from the ARMv7 Privilege Level).
+ */
+static inline int arm_current_el(CPUARMState *env)
+{
+    if (arm_feature(env, ARM_FEATURE_M)) {
+        return arm_v7m_is_handler_mode(env) ||
+            !(env->v7m.control[env->v7m.secure] & 1);
+    }
+
+    if (is_a64(env)) {
+        return extract32(env->pstate, 2, 2);
+    }
+
+    switch (env->uncached_cpsr & 0x1f) {
+    case ARM_CPU_MODE_USR:
+        return 0;
+    case ARM_CPU_MODE_HYP:
+        return 2;
+    case ARM_CPU_MODE_MON:
+        return 3;
+    default:
+        if (arm_is_secure(env) && !arm_el_is_aa64(env, 3)) {
+            /* If EL3 is 32-bit then all secure privileged modes run in EL3 */
+            return 3;
+        }
+
+        return 1;
+    }
+}
+
 static inline bool arm_cpu_data_is_big_endian_a32(CPUARMState *env,
                                                   bool sctlr_b)
 {
diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/intc/arm_gicv3_cpuif.c
+++ b/hw/intc/arm_gicv3_cpuif.c
@@ -XXX,XX +XXX,XX @@
 #include "cpu.h"
 #include "target/arm/cpregs.h"
 #include "target/arm/cpu-features.h"
+#include "target/arm/internals.h"
 #include "system/tcg.h"
 #include "system/qtest.h"
 
diff --git a/target/arm/arch_dump.c b/target/arm/arch_dump.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/arch_dump.c
+++ b/target/arm/arch_dump.c
@@ -XXX,XX +XXX,XX @@
 #include "elf.h"
 #include "system/dump.h"
 #include "cpu-features.h"
+#include "internals.h"
 
 /* struct user_pt_regs from arch/arm64/include/uapi/asm/ptrace.h */
 struct aarch64_user_regs {
-- 
2.43.0

The definition of SCR_EL3.RW says that its effective value is 1 if:
 - EL2 is implemented and does not support AArch32, and SCR_EL3.NS is 1
 - the effective value of SCR_EL3.{EEL2,NS} is {1,0} (i.e. we are
   Secure and Secure EL2 is disabled)

We implement the second of these in arm_el_is_aa64(), but forgot the
first.

Provide a new function arm_scr_rw_eff() to return the effective
value of SCR_EL3.RW, and use it in arm_el_is_aa64() and the other
places that currently look directly at the bit value.

(scr_write() enforces that the RW bit is RAO/WI if neither EL1 nor
EL2 have AArch32 support, but if EL1 does but EL2 does not then the
bit must still be writeable.)

This will mean that if code at EL3 attempts to perform an exception
return to AArch32 EL2 when EL2 is AArch64-only we will correctly
handle this as an illegal exception return: it will be caught by the
"return to an EL which is configured for a different register width"
check in HELPER(exception_return).

We do already have some CPU types which don't implement AArch32
above EL0, so this is technically a bug; it doesn't seem worth
backporting to stable because no sensible guest code will be
deliberately attempting to set the RW bit to a value corresponding
to an unimplemented execution state and then checking that we
did the right thing.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
---
 target/arm/internals.h | 26 +++++++++++++++++++++++---
 target/arm/helper.c    |  4 ++--
 2 files changed, 25 insertions(+), 5 deletions(-)

diff --git a/target/arm/internals.h b/target/arm/internals.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/internals.h
+++ b/target/arm/internals.h
@@ -XXX,XX +XXX,XX @@ static inline FloatRoundMode arm_rmode_to_sf(ARMFPRounding rmode)
     return arm_rmode_to_sf_map[rmode];
 }
 
+/* Return the effective value of SCR_EL3.RW */
+static inline bool arm_scr_rw_eff(CPUARMState *env)
+{
+    /*
+     * SCR_EL3.RW has an effective value of 1 if:
+     *  - we are NS and EL2 is implemented but doesn't support AArch32
+     *  - we are S and EL2 is enabled (in which case it must be AArch64)
+     */
+    ARMCPU *cpu = env_archcpu(env);
+
+    if (env->cp15.scr_el3 & SCR_RW) {
+        return true;
+    }
+    if (env->cp15.scr_el3 & SCR_NS) {
+        return arm_feature(env, ARM_FEATURE_EL2) &&
+            !cpu_isar_feature(aa64_aa32_el2, cpu);
+    } else {
+        return env->cp15.scr_el3 & SCR_EEL2;
+    }
+}
+
 /* Return true if the specified exception level is running in AArch64 state. */
 static inline bool arm_el_is_aa64(CPUARMState *env, int el)
 {
@@ -XXX,XX +XXX,XX @@ static inline bool arm_el_is_aa64(CPUARMState *env, int el)
         return aa64;
     }
 
-    if (arm_feature(env, ARM_FEATURE_EL3) &&
-        ((env->cp15.scr_el3 & SCR_NS) || !(env->cp15.scr_el3 & SCR_EEL2))) {
-        aa64 = aa64 && (env->cp15.scr_el3 & SCR_RW);
+    if (arm_feature(env, ARM_FEATURE_EL3)) {
+        aa64 = aa64 && arm_scr_rw_eff(env);
     }
 
     if (el == 2) {
diff --git a/target/arm/helper.c b/target/arm/helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -XXX,XX +XXX,XX @@ uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx,
     uint64_t hcr_el2;
 
     if (arm_feature(env, ARM_FEATURE_EL3)) {
-        rw = ((env->cp15.scr_el3 & SCR_RW) == SCR_RW);
+        rw = arm_scr_rw_eff(env);
     } else {
         /*
          * Either EL2 is the highest EL (and so the EL2 register width
@@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch64(CPUState *cs)
 
         switch (new_el) {
         case 3:
-            is_aa64 = (env->cp15.scr_el3 & SCR_RW) != 0;
+            is_aa64 = arm_scr_rw_eff(env);
             break;
         case 2:
             hcr = arm_hcr_el2_eff(env);
-- 
2.43.0

When EL1 doesn't support AArch32, the HCR_EL2.RW bit is supposed to
be RAO/WI. Enforce the RAO/WI behaviour.

Note that we handle "reset value should honour RES1 bits" in the same
way that SCR_EL3 does, via a reset function.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
---
 target/arm/helper.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/target/arm/helper.c b/target/arm/helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -XXX,XX +XXX,XX @@ static void do_hcr_write(CPUARMState *env, uint64_t value, uint64_t valid_mask)
     /* Clear RES0 bits.  */
     value &= valid_mask;
 
+    /* RW is RAO/WI if EL1 is AArch64 only */
+    if (!cpu_isar_feature(aa64_aa32_el1, cpu)) {
+        value |= HCR_RW;
+    }
+
     /*
      * These bits change the MMU setup:
      * HCR_VM enables stage 2 translation
@@ -XXX,XX +XXX,XX @@ static void hcr_writelow(CPUARMState *env, const ARMCPRegInfo *ri,
     do_hcr_write(env, value, MAKE_64BIT_MASK(32, 32));
 }
 
+static void hcr_reset(CPUARMState *env, const ARMCPRegInfo *ri)
+{
+    /* hcr_write will set the RES1 bits on an AArch64-only CPU */
+    hcr_write(env, ri, 0);
+}
+
 /*
  * Return the effective value of HCR_EL2, at the given security state.
  * Bits that are not included here:
@@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo el2_cp_reginfo[] = {
       .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 0,
       .access = PL2_RW, .fieldoffset = offsetof(CPUARMState, cp15.hcr_el2),
       .nv2_redirect_offset = 0x78,
+      .resetfn = hcr_reset,
       .writefn = hcr_write, .raw_writefn = raw_write },
     { .name = "HCR", .state = ARM_CP_STATE_AA32,
       .type = ARM_CP_ALIAS | ARM_CP_IO,
-- 
2.43.0

We already call env_archcpu() multiple times within the
exception_return helper function, and we're about to want to
add another use of the ARMCPU pointer. Add a local variable
cpu so we can call env_archcpu() just once.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
---
 target/arm/tcg/helper-a64.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/target/arm/tcg/helper-a64.c b/target/arm/tcg/helper-a64.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/helper-a64.c
+++ b/target/arm/tcg/helper-a64.c
@@ -XXX,XX +XXX,XX @@ static void cpsr_write_from_spsr_elx(CPUARMState *env,
 
 void HELPER(exception_return)(CPUARMState *env, uint64_t new_pc)
 {
+    ARMCPU *cpu = env_archcpu(env);
     int cur_el = arm_current_el(env);
     unsigned int spsr_idx = aarch64_banked_spsr_index(cur_el);
     uint32_t spsr = env->banked_spsr[spsr_idx];
@@ -XXX,XX +XXX,XX @@ void HELPER(exception_return)(CPUARMState *env, uint64_t new_pc)
     }
 
     bql_lock();
-    arm_call_pre_el_change_hook(env_archcpu(env));
+    arm_call_pre_el_change_hook(cpu);
     bql_unlock();
 
     if (!return_to_aa64) {
@@ -XXX,XX +XXX,XX @@ void HELPER(exception_return)(CPUARMState *env, uint64_t new_pc)
         int tbii;
 
         env->aarch64 = true;
-        spsr &= aarch64_pstate_valid_mask(&env_archcpu(env)->isar);
+        spsr &= aarch64_pstate_valid_mask(&cpu->isar);
         pstate_write(env, spsr);
         if (!arm_singlestep_active(env)) {
             env->pstate &= ~PSTATE_SS;
@@ -XXX,XX +XXX,XX @@ void HELPER(exception_return)(CPUARMState *env, uint64_t new_pc)
     aarch64_sve_change_el(env, cur_el, new_el, return_to_aa64);
 
     bql_lock();
-    arm_call_el_change_hook(env_archcpu(env));
+    arm_call_el_change_hook(cpu);
     bql_unlock();
 
     return;
-- 
2.43.0

In the Arm ARM, rule R_TYTWB states that returning to AArch32
is an illegal exception return if:
 * AArch32 is not supported at any exception level
 * the target EL is configured for AArch64 via SCR_EL3.RW
   or HCR_EL2.RW or via CPU state at reset

We check the second of these, but not the first (which can only be
relevant for the case of a return to EL0, because if AArch32 is not
supported at one of the higher ELs then the RW bits will have an
effective value of 1 and the the "configured for AArch64" condition
will hold also).

Add the missing condition. Although this is technically a bug
(because we have one AArch64-only CPU: a64fx) it isn't worth
backporting to stable because no sensible guest code will
deliberately try to return to a nonexistent execution state
to check that it gets an illegal exception return.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
---
 target/arm/tcg/helper-a64.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/target/arm/tcg/helper-a64.c b/target/arm/tcg/helper-a64.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/helper-a64.c
+++ b/target/arm/tcg/helper-a64.c
@@ -XXX,XX +XXX,XX @@ void HELPER(exception_return)(CPUARMState *env, uint64_t new_pc)
         goto illegal_return;
     }
 
+    if (!return_to_aa64 && !cpu_isar_feature(aa64_aa32, cpu)) {
+        /* Return to AArch32 when CPU is AArch64-only */
+        goto illegal_return;
+    }
+
     if (new_el == 1 && (arm_hcr_el2_eff(env) & HCR_TGE)) {
         goto illegal_return;
     }
-- 
2.43.0

I'm down as the only listed maintainer for quite a lot of Arm SoC and
board types.  In some cases this is only as the "maintainer of last
resort" and I'm not in practice doing anything beyond patch review
and the odd bit of tidyup.

Move these entries in MAINTAINERS from "Maintained" to "Odd Fixes",
to better represent reality.  Entries for other boards and SoCs where
I do more actively care (or where there is a listed co-maintainer)
remain as they are.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20250307152838.3226398-1-peter.maydell@linaro.org
---
 MAINTAINERS | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index XXXXXXX..XXXXXXX 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -XXX,XX +XXX,XX @@ F: docs/system/arm/kzm.rst
 Integrator CP
 M: Peter Maydell <peter.maydell@linaro.org>
 L: qemu-arm@nongnu.org
-S: Maintained
+S: Odd Fixes
 F: hw/arm/integratorcp.c
 F: hw/misc/arm_integrator_debug.c
 F: include/hw/misc/arm_integrator_debug.h
@@ -XXX,XX +XXX,XX @@ F: docs/system/arm/mps2.rst
 Musca
 M: Peter Maydell <peter.maydell@linaro.org>
 L: qemu-arm@nongnu.org
-S: Maintained
+S: Odd Fixes
 F: hw/arm/musca.c
 F: docs/system/arm/musca.rst
 
@@ -XXX,XX +XXX,XX @@ F: tests/functional/test_aarch64_raspi4.py
 Real View
 M: Peter Maydell <peter.maydell@linaro.org>
 L: qemu-arm@nongnu.org
-S: Maintained
+S: Odd Fixes
 F: hw/arm/realview*
 F: hw/cpu/realview_mpcore.c
 F: hw/intc/realview_gic.c
@@ -XXX,XX +XXX,XX @@ F: tests/functional/test_arm_collie.py
 Stellaris
 M: Peter Maydell <peter.maydell@linaro.org>
 L: qemu-arm@nongnu.org
-S: Maintained
+S: Odd Fixes
 F: hw/*/stellaris*
 F: hw/display/ssd03*
 F: include/hw/input/gamepad.h
@@ -XXX,XX +XXX,XX @@ F: docs/system/arm/stm32.rst
 Versatile Express
 M: Peter Maydell <peter.maydell@linaro.org>
 L: qemu-arm@nongnu.org
-S: Maintained
+S: Odd Fixes
 F: hw/arm/vexpress.c
 F: hw/display/sii9022.c
 F: docs/system/arm/vexpress.rst
@@ -XXX,XX +XXX,XX @@ F: tests/functional/test_arm_vexpress.py
 Versatile PB
 M: Peter Maydell <peter.maydell@linaro.org>
 L: qemu-arm@nongnu.org
-S: Maintained
+S: Odd Fixes
 F: hw/*/versatile*
 F: hw/i2c/arm_sbcon_i2c.c
 F: include/hw/i2c/arm_sbcon_i2c.h
@@ -XXX,XX +XXX,XX @@ F: include/hw/hyperv/vmbus*.h
 OMAP
 M: Peter Maydell <peter.maydell@linaro.org>
 L: qemu-arm@nongnu.org
-S: Maintained
+S: Odd Fixes
 F: hw/*/omap*
 F: include/hw/arm/omap.h
 F: docs/system/arm/sx1.rst
-- 
2.43.0

From: Paolo Bonzini <pbonzini@redhat.com>

The guest does not control whether characters are sent on the UART.
Sending them before the guest happens to boot will now result in a
"guest error" log entry that is only because of timing, even if the
guest _would_ later setup the receiver correctly.

This reverts the bulk of commit abf2b6a028670bd2890bb3aee7e103fe53e4b0df,
and instead adds a comment about why we don't check the enable bits.

Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20250311153717.206129-1-pbonzini@redhat.com
[PMM: expanded comment]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/char/pl011.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/hw/char/pl011.c b/hw/char/pl011.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/char/pl011.c
+++ b/hw/char/pl011.c
@@ -XXX,XX +XXX,XX @@ static int pl011_can_receive(void *opaque)
     unsigned fifo_depth = pl011_get_fifo_depth(s);
     unsigned fifo_available = fifo_depth - s->read_count;
 
-    if (!(s->cr & CR_UARTEN)) {
-        qemu_log_mask(LOG_GUEST_ERROR,
-                      "PL011 receiving data on disabled UART\n");
-    }
-    if (!(s->cr & CR_RXE)) {
-        qemu_log_mask(LOG_GUEST_ERROR,
-                      "PL011 receiving data on disabled RX UART\n");
-    }
-    trace_pl011_can_receive(s->lcr, s->read_count, fifo_depth, fifo_available);
+    /*
+     * In theory we should check the UART and RX enable bits here and
+     * return 0 if they are not set (so the guest can't receive data
+     * until you have enabled the UART). In practice we suspect there
+     * is at least some guest code out there which has been tested only
+     * on QEMU and which never bothers to enable the UART because we
+     * historically never enforced that. So we effectively keep the
+     * UART continuously enabled regardless of the enable bits.
+     */
 
+    trace_pl011_can_receive(s->lcr, s->read_count, fifo_depth, fifo_available);
     return fifo_available;
 }
 
-- 
2.43.0

From: Joe Komlodi <komlodi@google.com>

On ARM hosts with CTR_EL0.DIC and CTR_EL0.IDC set, this would only cause
an ISB to be executed during cache maintenance, which could lead to QEMU
executing TBs containing garbage instructions.

This seems to be because the ISB finishes executing instructions and
flushes the pipeline, but the ISB doesn't guarantee that writes from the
executed instructions are committed. If a small enough TB is created, it's
possible that the writes setting up the TB aren't committed by the time the
TB is executed.

This function is intended to be a port of the gcc implementation
(https://github.com/gcc-mirror/gcc/blob/85b46d0795ac76bc192cb8f88b646a647acf98c1/libgcc/config/aarch64/sync-cache.c#L67)
which makes the first DSB unconditional, so we can fix the synchronization
issue by doing that as well.

Cc: qemu-stable@nongnu.org
Fixes: 664a79735e4deb1 ("util: Specialize flush_idcache_range for aarch64")
Signed-off-by: Joe Komlodi <komlodi@google.com>
Message-id: 20250310203622.1827940-2-komlodi@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 util/cacheflush.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/util/cacheflush.c b/util/cacheflush.c
index XXXXXXX..XXXXXXX 100644
--- a/util/cacheflush.c
+++ b/util/cacheflush.c
@@ -XXX,XX +XXX,XX @@ void flush_idcache_range(uintptr_t rx, uintptr_t rw, size_t len)
         for (p = rw & -dcache_lsize; p < rw + len; p += dcache_lsize) {
             asm volatile("dc\tcvau, %0" : : "r" (p) : "memory");
         }
-        asm volatile("dsb\tish" : : : "memory");
     }
 
+    /* DSB unconditionally to ensure any outstanding writes are committed. */
+    asm volatile("dsb\tish" : : : "memory");
+
     /*
      * If CTR_EL0.DIC is enabled, Instruction cache cleaning to the Point
      * of Unification is not required for instruction to data coherence.
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

The check for fp_excp_el in assert_fp_access_checked is
incorrect.  For SME, with StreamingMode enabled, the access
is really against the streaming mode vectors, and access
to the normal fp registers is allowed to be disabled.
C.f. sme_enabled_check.

Convert sve_access_checked to match, even though we don't
currently check the exception state.

Cc: qemu-stable@nongnu.org
Fixes: 3d74825f4d6 ("target/arm: Add SME enablement checks")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250307190415.982049-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/translate-a64.h |  2 +-
 target/arm/tcg/translate.h     | 10 +++++++---
 target/arm/tcg/translate-a64.c | 17 +++++++++--------
 3 files changed, 17 insertions(+), 12 deletions(-)

diff --git a/target/arm/tcg/translate-a64.h b/target/arm/tcg/translate-a64.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-a64.h
+++ b/target/arm/tcg/translate-a64.h
@@ -XXX,XX +XXX,XX @@ TCGv_i64 gen_mte_checkN(DisasContext *s, TCGv_i64 addr, bool is_write,
 static inline void assert_fp_access_checked(DisasContext *s)
 {
 #ifdef CONFIG_DEBUG_TCG
-    if (unlikely(!s->fp_access_checked || s->fp_excp_el)) {
+    if (unlikely(s->fp_access_checked <= 0)) {
         fprintf(stderr, "target-arm: FP access check missing for "
                 "instruction 0x%08x\n", s->insn);
         abort();
diff --git a/target/arm/tcg/translate.h b/target/arm/tcg/translate.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate.h
+++ b/target/arm/tcg/translate.h
@@ -XXX,XX +XXX,XX @@ typedef struct DisasContext {
     bool aarch64;
     bool thumb;
     bool lse2;
-    /* Because unallocated encodings generate different exception syndrome
+    /*
+     * Because unallocated encodings generate different exception syndrome
      * information from traps due to FP being disabled, we can't do a single
      * "is fp access disabled" check at a high level in the decode tree.
      * To help in catching bugs where the access check was forgotten in some
      * code path, we set this flag when the access check is done, and assert
      * that it is set at the point where we actually touch the FP regs.
+     *   0: not checked,
+     *   1: checked, access ok
+     *  -1: checked, access denied
      */
-    bool fp_access_checked;
-    bool sve_access_checked;
+    int8_t fp_access_checked;
+    int8_t sve_access_checked;
     /* ARMv8 single-step state (this is distinct from the QEMU gdbstub
      * single-step support).
      */
diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-a64.c
+++ b/target/arm/tcg/translate-a64.c
@@ -XXX,XX +XXX,XX @@ static bool fp_access_check_only(DisasContext *s)
 {
     if (s->fp_excp_el) {
         assert(!s->fp_access_checked);
-        s->fp_access_checked = true;
+        s->fp_access_checked = -1;
 
         gen_exception_insn_el(s, 0, EXCP_UDEF,
                               syn_fp_access_trap(1, 0xe, false, 0),
                               s->fp_excp_el);
         return false;
     }
-    s->fp_access_checked = true;
+    s->fp_access_checked = 1;
     return true;
 }
 
@@ -XXX,XX +XXX,XX @@ bool sve_access_check(DisasContext *s)
                               syn_sve_access_trap(), s->sve_excp_el);
         goto fail_exit;
     }
-    s->sve_access_checked = true;
+    s->sve_access_checked = 1;
     return fp_access_check(s);
 
  fail_exit:
     /* Assert that we only raise one exception per instruction. */
     assert(!s->sve_access_checked);
-    s->sve_access_checked = true;
+    s->sve_access_checked = -1;
     return false;
 }
 
@@ -XXX,XX +XXX,XX @@ bool sme_enabled_check(DisasContext *s)
      * sme_excp_el by itself for cpregs access checks.
      */
     if (!s->fp_excp_el || s->sme_excp_el < s->fp_excp_el) {
-        s->fp_access_checked = true;
-        return sme_access_check(s);
+        bool ret = sme_access_check(s);
+        s->fp_access_checked = (ret ? 1 : -1);
+        return ret;
     }
     return fp_access_check_only(s);
 }
@@ -XXX,XX +XXX,XX @@ static void aarch64_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu)
     s->insn = insn;
     s->base.pc_next = pc + 4;
 
-    s->fp_access_checked = false;
-    s->sve_access_checked = false;
+    s->fp_access_checked = 0;
+    s->sve_access_checked = 0;
 
     if (s->pstate_il) {
         /*
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

In StreamingMode, fp_access_checked is handled already.
We cannot fall through to fp_access_check lest we fall
foul of the double-check assertion.

Cc: qemu-stable@nongnu.org
Fixes: 285b1d5fcef ("target/arm: Handle SME in sve_access_check")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250307190415.982049-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: move declaration of 'ret' to top of block]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/translate-a64.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-a64.c
+++ b/target/arm/tcg/translate-a64.c
@@ -XXX,XX +XXX,XX @@ static int fp_access_check_vector_hsd(DisasContext *s, bool is_q, MemOp esz)
 bool sve_access_check(DisasContext *s)
 {
     if (s->pstate_sm || !dc_isar_feature(aa64_sve, s)) {
+        bool ret;
+
         assert(dc_isar_feature(aa64_sme, s));
-        if (!sme_sm_enabled_check(s)) {
-            goto fail_exit;
-        }
-    } else if (s->sve_excp_el) {
+        ret = sme_sm_enabled_check(s);
+        s->sve_access_checked = (ret ? 1 : -1);
+        return ret;
+    }
+    if (s->sve_excp_el) {
+        /* Assert that we only raise one exception per instruction. */
+        assert(!s->sve_access_checked);
         gen_exception_insn_el(s, 0, EXCP_UDEF,
                               syn_sve_access_trap(), s->sve_excp_el);
-        goto fail_exit;
+        s->sve_access_checked = -1;
+        return false;
     }
     s->sve_access_checked = 1;
     return fp_access_check(s);
-
- fail_exit:
-    /* Assert that we only raise one exception per instruction. */
-    assert(!s->sve_access_checked);
-    s->sve_access_checked = -1;
-    return false;
 }
 
 /*
-- 
2.43.0

We want to capture potential Rust backtraces on panics in our test
logs, which isn't Rust's default behaviour.  Set RUST_BACKTRACE=1 in
the add_test_setup environments, so that all our tests get run with
this environment variable set.

This makes the setting of that variable in the gitlab CI template
redundant, so we can remove it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20250310102950.3752908-1-peter.maydell@linaro.org
---
 meson.build                         | 9 ++++++---
 .gitlab-ci.d/buildtest-template.yml | 1 -
 2 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/meson.build b/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/meson.build
+++ b/meson.build
@@ -XXX,XX +XXX,XX @@ project('qemu', ['c'], meson_version: '>=1.5.0',
 
 meson.add_devenv({ 'MESON_BUILD_ROOT' : meson.project_build_root() })
 
-add_test_setup('quick', exclude_suites: ['slow', 'thorough'], is_default: true)
-add_test_setup('slow', exclude_suites: ['thorough'], env: ['G_TEST_SLOW=1', 'SPEED=slow'])
-add_test_setup('thorough', env: ['G_TEST_SLOW=1', 'SPEED=thorough'])
+add_test_setup('quick', exclude_suites: ['slow', 'thorough'], is_default: true,
+               env: ['RUST_BACKTRACE=1'])
+add_test_setup('slow', exclude_suites: ['thorough'],
+               env: ['G_TEST_SLOW=1', 'SPEED=slow', 'RUST_BACKTRACE=1'])
+add_test_setup('thorough',
+               env: ['G_TEST_SLOW=1', 'SPEED=thorough', 'RUST_BACKTRACE=1'])
 
 meson.add_postconf_script(find_program('scripts/symlink-install-tree.py'))
 
diff --git a/.gitlab-ci.d/buildtest-template.yml b/.gitlab-ci.d/buildtest-template.yml
index XXXXXXX..XXXXXXX 100644
--- a/.gitlab-ci.d/buildtest-template.yml
+++ b/.gitlab-ci.d/buildtest-template.yml
@@ -XXX,XX +XXX,XX @@
   stage: test
   image: $CI_REGISTRY_IMAGE/qemu/$IMAGE:$QEMU_CI_CONTAINER_TAG
   script:
-    - export RUST_BACKTRACE=1
     - source scripts/ci/gitlab-ci-section
     - section_start buildenv "Setting up to run tests"
     - scripts/git-submodule.sh update roms/SLOF
-- 
2.43.0

v3->v4: Windows headers define an INT type which clashed
with an enum value name in arm_gicv3_its.c...

The following changes since commit eae587e8e3694b1aceab23239493fb4c7e1a80f5:

Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2021-09-13' into staging (2021-09-13 11:00:30 +0100)

are available in the Git repository at:

https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20210913-3

for you to fetch changes up to 28e987a7e7edaa3ca7feeac65edca26145df8814:

hw/arm/mps2.c: Mark internal-only I2C buses as 'full' (2021-09-13 21:01:08 +0100)

----------------------------------------------------------------
target-arm queue:
 * mark MPS2/MPS3 board-internal i2c buses as 'full' so that command
   line user-created devices are not plugged into them
 * Take an exception if PSTATE.IL is set
 * Support an emulated ITS in the virt board
 * Add support for kudo-bmc board
 * Probe for KVM_CAP_ARM_VM_IPA_SIZE when creating scratch VM
 * cadence_uart: Fix clock handling issues that prevented
   u-boot from running

----------------------------------------------------------------
Bin Meng (6):
      hw/misc: zynq_slcr: Correctly compute output clocks in the reset exit phase
      hw/char: cadence_uart: Disable transmit when input clock is disabled
      hw/char: cadence_uart: Move clock/reset check to uart_can_receive()
      hw/char: cadence_uart: Convert to memop_with_attrs() ops
      hw/char: cadence_uart: Ignore access when unclocked or in reset for uart_{read, write}()
      hw/char: cadence_uart: Log a guest error when device is unclocked or in reset

Chris Rauer (1):
      hw/arm: Add support for kudo-bmc board.

Marc Zyngier (1):
      hw/arm/virt: KVM: Probe for KVM_CAP_ARM_VM_IPA_SIZE when creating scratch VM

Peter Maydell (5):
      target/arm: Take an exception if PSTATE.IL is set
      qdev: Support marking individual buses as 'full'
      hw/arm/mps2-tz.c: Add extra data parameter to MakeDevFn
      hw/arm/mps2-tz.c: Mark internal-only I2C buses as 'full'
      hw/arm/mps2.c: Mark internal-only I2C buses as 'full'

Richard Henderson (1):
      target/arm: Merge disas_a64_insn into aarch64_tr_translate_insn

Shashi Mallela (9):
      hw/intc: GICv3 ITS initial framework
      hw/intc: GICv3 ITS register definitions added
      hw/intc: GICv3 ITS command queue framework
      hw/intc: GICv3 ITS Command processing
      hw/intc: GICv3 ITS Feature enablement
      hw/intc: GICv3 redistributor ITS processing
      tests/data/acpi/virt: Add IORT files for ITS
      hw/arm/virt: add ITS support in virt GIC
      tests/data/acpi/virt: Update IORT files for ITS