Hi; here's a target-arm pullreq to go in before softfreeze. This is actually pretty much entirely bugfixes (since the SEL2 timers we implement here are a missing part of a feature we claim to already implement). thanks -- PMM The following changes since commit 98c7362b1efe651327385a25874a73e008c6549e: Merge tag 'accel-cpus-20250306' of https://github.com/philmd/qemu into staging (2025-03-07 07:39:49 +0800) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20250307 for you to fetch changes up to 0ce0739d46983e5e88fa9c149cb305689c9d8c6f: target/rx: Remove TCG_CALL_NO_WG from helpers which write env (2025-03-07 15:03:20 +0000) ---------------------------------------------------------------- target-arm queue: * hw/arm/smmu-common: Remove the repeated ttb field * hw/gpio: npcm7xx: fixup out-of-bounds access * tests/functional/test_arm_sx1: Check whether the serial console is working * target/arm: Fix minor bugs in generic timer register handling * target/arm: Implement SEL2 physical and virtual timers * target/arm: Correct STRD, LDRD atomicity and fault behaviour * target/arm: Make dummy debug registers RAZ, not NOP * util/qemu-timer.c: Don't warp timer from timerlist_rearm() * include/exec/memop.h: Expand comment for MO_ATOM_SUBALIGN * hw/arm/smmu: Introduce smmu_configs_inv_sid_range() helper * target/rx: Set exception vector base to 0xffffff80 * target/rx: Remove TCG_CALL_NO_WG from helpers which write env ---------------------------------------------------------------- Alex Bennée (4): target/arm: Implement SEL2 physical and virtual timers target/arm: Document the architectural names of our GTIMERs hw/arm: enable secure EL2 timers for virt machine hw/arm: enable secure EL2 timers for sbsa machine JianChunfu (2): hw/arm/smmu-common: Remove the repeated ttb field hw/arm/smmu: Introduce smmu_configs_inv_sid_range() helper Keith Packard (2): target/rx: Set exception vector base to 0xffffff80 target/rx: Remove TCG_CALL_NO_WG from helpers which write env Patrick Venture (1): hw/gpio: npcm7xx: fixup out-of-bounds access Peter Maydell (11): target/arm: Apply correct timer offset when calculating deadlines target/arm: Don't apply CNTVOFF_EL2 for EL2_VIRT timer target/arm: Make CNTPS_* UNDEF from Secure EL1 when Secure EL2 is enabled target/arm: Always apply CNTVOFF_EL2 for CNTV_TVAL_EL02 accesses target/arm: Refactor handling of timer offset for direct register accesses target/arm: Correct LDRD atomicity and fault behaviour target/arm: Correct STRD atomicity target/arm: Drop unused address_offset from op_addr_{rr, ri}_post() target/arm: Make dummy debug registers RAZ, not NOP util/qemu-timer.c: Don't warp timer from timerlist_rearm() include/exec/memop.h: Expand comment for MO_ATOM_SUBALIGN Thomas Huth (1): tests/functional/test_arm_sx1: Check whether the serial console is working MAINTAINERS | 1 + hw/arm/smmu-internal.h | 5 - include/exec/memop.h | 8 +- include/hw/arm/bsa.h | 2 + include/hw/arm/smmu-common.h | 7 +- target/arm/cpu.h | 2 + target/arm/gtimer.h | 14 +- target/arm/internals.h | 5 +- target/rx/helper.h | 34 ++-- hw/arm/sbsa-ref.c | 2 + hw/arm/smmu-common.c | 21 +++ hw/arm/smmuv3.c | 19 +-- hw/arm/virt.c | 2 + hw/gpio/npcm7xx_gpio.c | 3 +- target/arm/cpu.c | 4 + target/arm/debug_helper.c | 7 +- target/arm/helper.c | 324 ++++++++++++++++++++++++++++++++------- target/arm/tcg/op_helper.c | 8 +- target/arm/tcg/translate.c | 147 +++++++++++------- target/rx/helper.c | 2 +- util/qemu-timer.c | 4 - hw/arm/trace-events | 3 +- tests/functional/test_arm_sx1.py | 7 +- 23 files changed, 455 insertions(+), 176 deletions(-) From: JianChunfu <jansef.jian@hj-micro.com> SMMUTransCfg->ttb is never used in QEMU, TT base address can be accessed by SMMUTransCfg->tt[i]->ttb. Signed-off-by: JianChunfu <jansef.jian@hj-micro.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20250221031034.69822-1-jansef.jian@hj-micro.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/smmu-common.h | 1 - 1 file changed, 1 deletion(-) diff --git a/include/hw/arm/smmu-common.h b/include/hw/arm/smmu-common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/smmu-common.h +++ b/include/hw/arm/smmu-common.h @@ -XXX,XX +XXX,XX @@ typedef struct SMMUTransCfg { /* Used by stage-1 only. */ bool aa64; /* arch64 or aarch32 translation table */ bool record_faults; /* record fault events */ - uint64_t ttb; /* TT base address */ uint8_t oas; /* output address width */ uint8_t tbi; /* Top Byte Ignore */ int asid; -- 2.43.0 From: Patrick Venture <venture@google.com> The reg isn't validated to be a possible register before it's dereferenced for one case. The mmio space registered for the gpio device is 4KiB but there aren't that many registers in the struct. Cc: qemu-stable@nongnu.org Fixes: 526dbbe0874 ("hw/gpio: Add GPIO model for Nuvoton NPCM7xx") Signed-off-by: Patrick Venture <venture@google.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20250226024603.493148-1-venture@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/gpio/npcm7xx_gpio.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/hw/gpio/npcm7xx_gpio.c b/hw/gpio/npcm7xx_gpio.c index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/npcm7xx_gpio.c +++ b/hw/gpio/npcm7xx_gpio.c @@ -XXX,XX +XXX,XX @@ static void npcm7xx_gpio_regs_write(void *opaque, hwaddr addr, uint64_t v, return; } - diff = s->regs[reg] ^ value; - switch (reg) { case NPCM7XX_GPIO_TLOCK1: case NPCM7XX_GPIO_TLOCK2: @@ -XXX,XX +XXX,XX @@ static void npcm7xx_gpio_regs_write(void *opaque, hwaddr addr, uint64_t v, case NPCM7XX_GPIO_PU: case NPCM7XX_GPIO_PD: case NPCM7XX_GPIO_IEM: + diff = s->regs[reg] ^ value; s->regs[reg] = value; npcm7xx_gpio_update_pins(s, diff); break; -- 2.43.0 From: Thomas Huth <thuth@redhat.com> The kernel that is used in the sx1 test prints the usual Linux log onto the serial console, but this test currently ignores it. To make sure that the serial device is working properly, let's check for some strings in the output here. While we're at it, also add the test to the corresponding section in the MAINTAINERS file. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20250226104833.1176253-1-thuth@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 1 + tests/functional/test_arm_sx1.py | 7 ++++--- 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ S: Maintained F: hw/*/omap* F: include/hw/arm/omap.h F: docs/system/arm/sx1.rst +F: tests/functional/test_arm_sx1.py IPack M: Alberto Garcia <berto@igalia.com> diff --git a/tests/functional/test_arm_sx1.py b/tests/functional/test_arm_sx1.py index XXXXXXX..XXXXXXX 100755 --- a/tests/functional/test_arm_sx1.py +++ b/tests/functional/test_arm_sx1.py @@ -XXX,XX +XXX,XX @@ def test_arm_sx1_initrd(self): self.vm.add_args('-append', f'kunit.enable=0 rdinit=/sbin/init {self.CONSOLE_ARGS}') self.vm.add_args('-no-reboot') self.launch_kernel(zimage_path, - initrd=initrd_path) + initrd=initrd_path, + wait_for='Boot successful') self.vm.wait(timeout=120) def test_arm_sx1_sd(self): @@ -XXX,XX +XXX,XX @@ def test_arm_sx1_sd(self): self.vm.add_args('-no-reboot') self.vm.add_args('-snapshot') self.vm.add_args('-drive', f'format=raw,if=sd,file={sd_fs_path}') - self.launch_kernel(zimage_path) + self.launch_kernel(zimage_path, wait_for='Boot successful') self.vm.wait(timeout=120) def test_arm_sx1_flash(self): @@ -XXX,XX +XXX,XX @@ def test_arm_sx1_flash(self): self.vm.add_args('-no-reboot') self.vm.add_args('-snapshot') self.vm.add_args('-drive', f'format=raw,if=pflash,file={flash_path}') - self.launch_kernel(zimage_path) + self.launch_kernel(zimage_path, wait_for='Boot successful') self.vm.wait(timeout=120) if __name__ == '__main__': -- 2.43.0 When we are calculating timer deadlines, the correct definition of whether or not to apply an offset to the physical count is described in the Arm ARM DDI4087 rev L.a section D12.2.4.1. This is different from when the offset should be applied for a direct read of the counter sysreg. We got this right for the EL1 physical timer and for the EL1 virtual timer, but got all the rest wrong: they should be using a zero offset always. Factor the offset calculation out into a function that has a comment documenting exactly which offset it is calculating and which gets the HYP, SEC, and HYPVIRT cases right. Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20250204125009.2281315-2-peter.maydell@linaro.org --- target/arm/helper.c | 29 +++++++++++++++++++++++++++-- 1 file changed, 27 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint64_t gt_phys_cnt_offset(CPUARMState *env) return gt_phys_raw_cnt_offset(env); } +static uint64_t gt_indirect_access_timer_offset(CPUARMState *env, int timeridx) +{ + /* + * Return the timer offset to use for indirect accesses to the timer. + * This is the Offset value as defined in D12.2.4.1 "Operation of the + * CompareValue views of the timers". + * + * The condition here is not always the same as the condition for + * whether to apply an offset register when doing a direct read of + * the counter sysreg; those conditions are described in the + * access pseudocode for each counter register. + */ + switch (timeridx) { + case GTIMER_PHYS: + return gt_phys_raw_cnt_offset(env); + case GTIMER_VIRT: + return env->cp15.cntvoff_el2; + case GTIMER_HYP: + case GTIMER_SEC: + case GTIMER_HYPVIRT: + return 0; + default: + g_assert_not_reached(); + } +} + static void gt_recalc_timer(ARMCPU *cpu, int timeridx) { ARMGenericTimer *gt = &cpu->env.cp15.c14_timer[timeridx]; @@ -XXX,XX +XXX,XX @@ static void gt_recalc_timer(ARMCPU *cpu, int timeridx) * Timer enabled: calculate and set current ISTATUS, irq, and * reset timer to when ISTATUS next has to change */ - uint64_t offset = timeridx == GTIMER_VIRT ? - cpu->env.cp15.cntvoff_el2 : gt_phys_raw_cnt_offset(&cpu->env); + uint64_t offset = gt_indirect_access_timer_offset(&cpu->env, timeridx); uint64_t count = gt_get_countervalue(&cpu->env); /* Note that this must be unsigned 64 bit arithmetic: */ int istatus = count - offset >= gt->cval; -- 2.43.0 The CNTVOFF_EL2 offset register should only be applied for accessses to CNTVCT_EL0 and for the EL1 virtual timer (CNTV_*). We were incorrectly applying it for the EL2 virtual timer (CNTHV_*). Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20250204125009.2281315-3-peter.maydell@linaro.org --- target/arm/helper.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint64_t gt_tval_read(CPUARMState *env, const ARMCPRegInfo *ri, switch (timeridx) { case GTIMER_VIRT: - case GTIMER_HYPVIRT: offset = gt_virt_cnt_offset(env); break; case GTIMER_PHYS: @@ -XXX,XX +XXX,XX @@ static void gt_tval_write(CPUARMState *env, const ARMCPRegInfo *ri, switch (timeridx) { case GTIMER_VIRT: - case GTIMER_HYPVIRT: offset = gt_virt_cnt_offset(env); break; case GTIMER_PHYS: -- 2.43.0 When we added Secure EL2 support, we missed that this needs an update to the access code for the EL3 physical timer registers. These are supposed to UNDEF from Secure EL1 when Secure EL2 is enabled. (Note for stable backporting: for backports to branches where CP_ACCESS_UNDEFINED is not defined, the old name to use instead is CP_ACCESS_TRAP_UNCATEGORIZED.) Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20250204125009.2281315-4-peter.maydell@linaro.org --- target/arm/helper.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult gt_stimer_access(CPUARMState *env, if (!arm_is_secure(env)) { return CP_ACCESS_UNDEFINED; } + if (arm_is_el2_enabled(env)) { + return CP_ACCESS_UNDEFINED; + } if (!(env->cp15.scr_el3 & SCR_ST)) { return CP_ACCESS_TRAP_EL3; } -- 2.43.0 Currently we handle CNTV_TVAL_EL02 by calling gt_tval_read() for the EL1 virt timer. This is almost correct, but the underlying CNTV_TVAL_EL0 register behaves slightly differently. CNTV_TVAL_EL02 always applies the CNTVOFF_EL2 offset; CNTV_TVAL_EL0 doesn't do so if we're at EL2 and HCR_EL2.E2H is 1. We were getting this wrong, because we ended up in gt_virt_cnt_offset() and did the E2H check. Factor out the tval read/write calculation from the selection of the offset, so that we can special case gt_virt_tval_read() and gt_virt_tval_write() to unconditionally pass CNTVOFF_EL2. Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20250204125009.2281315-5-peter.maydell@linaro.org --- target/arm/helper.c | 36 +++++++++++++++++++++++++++--------- 1 file changed, 27 insertions(+), 9 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void gt_cval_write(CPUARMState *env, const ARMCPRegInfo *ri, gt_recalc_timer(env_archcpu(env), timeridx); } +static uint64_t do_tval_read(CPUARMState *env, int timeridx, uint64_t offset) +{ + return (uint32_t)(env->cp15.c14_timer[timeridx].cval - + (gt_get_countervalue(env) - offset)); +} + static uint64_t gt_tval_read(CPUARMState *env, const ARMCPRegInfo *ri, int timeridx) { @@ -XXX,XX +XXX,XX @@ static uint64_t gt_tval_read(CPUARMState *env, const ARMCPRegInfo *ri, break; } - return (uint32_t)(env->cp15.c14_timer[timeridx].cval - - (gt_get_countervalue(env) - offset)); + return do_tval_read(env, timeridx, offset); +} + +static void do_tval_write(CPUARMState *env, int timeridx, uint64_t value, + uint64_t offset) +{ + trace_arm_gt_tval_write(timeridx, value); + env->cp15.c14_timer[timeridx].cval = gt_get_countervalue(env) - offset + + sextract64(value, 0, 32); + gt_recalc_timer(env_archcpu(env), timeridx); } static void gt_tval_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void gt_tval_write(CPUARMState *env, const ARMCPRegInfo *ri, offset = gt_phys_cnt_offset(env); break; } - - trace_arm_gt_tval_write(timeridx, value); - env->cp15.c14_timer[timeridx].cval = gt_get_countervalue(env) - offset + - sextract64(value, 0, 32); - gt_recalc_timer(env_archcpu(env), timeridx); + do_tval_write(env, timeridx, value, offset); } static void gt_ctl_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void gt_virt_cval_write(CPUARMState *env, const ARMCPRegInfo *ri, static uint64_t gt_virt_tval_read(CPUARMState *env, const ARMCPRegInfo *ri) { - return gt_tval_read(env, ri, GTIMER_VIRT); + /* + * This is CNTV_TVAL_EL02; unlike the underlying CNTV_TVAL_EL0 + * we always apply CNTVOFF_EL2. Special case that here rather + * than going into the generic gt_tval_read() and then having + * to re-detect that it's this register. + * Note that the accessfn/perms mean we know we're at EL2 or EL3 here. + */ + return do_tval_read(env, GTIMER_VIRT, env->cp15.cntvoff_el2); } static void gt_virt_tval_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { - gt_tval_write(env, ri, GTIMER_VIRT, value); + /* Similarly for writes to CNTV_TVAL_EL02 */ + do_tval_write(env, GTIMER_VIRT, value, env->cp15.cntvoff_el2); } static void gt_virt_ctl_write(CPUARMState *env, const ARMCPRegInfo *ri, -- 2.43.0 When reading or writing the timer registers, sometimes we need to apply one of the timer offsets. Specifically, this happens for direct reads of the counter registers CNTPCT_EL0 and CNTVCT_EL0 (and their self-synchronized variants CNTVCTSS_EL0 and CNTPCTSS_EL0). It also applies for direct reads and writes of the CNT*_TVAL_EL* registers that provide the 32-bit downcounting view of each timer. We currently do this with duplicated code in gt_tval_read() and gt_tval_write() and a special-case in gt_virt_cnt_read() and gt_cnt_read(). Refactor this so that we handle it all in a single function gt_direct_access_timer_offset(), to parallel how we handle the offset for indirect accesses. The call in the WFIT helper previously to gt_virt_cnt_offset() is now to gt_direct_access_timer_offset(); this is the correct behaviour, but it's not immediately obvious that it shouldn't be considered an indirect access, so we add an explanatory comment. This commit should make no behavioural changes. (Cc to stable because the following bugfix commit will depend on this one.) Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20250204125009.2281315-6-peter.maydell@linaro.org --- target/arm/internals.h | 5 +- target/arm/helper.c | 103 +++++++++++++++++++------------------ target/arm/tcg/op_helper.c | 8 ++- 3 files changed, 62 insertions(+), 54 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ int delete_hw_watchpoint(target_ulong addr, target_ulong len, int type); uint64_t gt_get_countervalue(CPUARMState *env); /* * Return the currently applicable offset between the system counter - * and CNTVCT_EL0 (this will be either 0 or the value of CNTVOFF_EL2). + * and the counter for the specified timer, as used for direct register + * accesses. */ -uint64_t gt_virt_cnt_offset(CPUARMState *env); +uint64_t gt_direct_access_timer_offset(CPUARMState *env, int timeridx); /* * Return mask of ARMMMUIdxBit values corresponding to an "invalidate diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint64_t gt_phys_raw_cnt_offset(CPUARMState *env) return 0; } -static uint64_t gt_phys_cnt_offset(CPUARMState *env) -{ - if (arm_current_el(env) >= 2) { - return 0; - } - return gt_phys_raw_cnt_offset(env); -} - static uint64_t gt_indirect_access_timer_offset(CPUARMState *env, int timeridx) { /* @@ -XXX,XX +XXX,XX @@ static uint64_t gt_indirect_access_timer_offset(CPUARMState *env, int timeridx) } } +uint64_t gt_direct_access_timer_offset(CPUARMState *env, int timeridx) +{ + /* + * Return the timer offset to use for direct accesses to the + * counter registers CNTPCT and CNTVCT, and for direct accesses + * to the CNT*_TVAL registers. + * + * This isn't exactly the same as the indirect-access offset, + * because here we also care about what EL the register access + * is being made from. + * + * This corresponds to the access pseudocode for the registers. + */ + uint64_t hcr; + + switch (timeridx) { + case GTIMER_PHYS: + if (arm_current_el(env) >= 2) { + return 0; + } + return gt_phys_raw_cnt_offset(env); + case GTIMER_VIRT: + switch (arm_current_el(env)) { + case 2: + hcr = arm_hcr_el2_eff(env); + if (hcr & HCR_E2H) { + return 0; + } + break; + case 0: + hcr = arm_hcr_el2_eff(env); + if ((hcr & (HCR_E2H | HCR_TGE)) == (HCR_E2H | HCR_TGE)) { + return 0; + } + break; + } + return env->cp15.cntvoff_el2; + case GTIMER_HYP: + case GTIMER_SEC: + case GTIMER_HYPVIRT: + return 0; + default: + g_assert_not_reached(); + } +} + static void gt_recalc_timer(ARMCPU *cpu, int timeridx) { ARMGenericTimer *gt = &cpu->env.cp15.c14_timer[timeridx]; @@ -XXX,XX +XXX,XX @@ static void gt_timer_reset(CPUARMState *env, const ARMCPRegInfo *ri, static uint64_t gt_cnt_read(CPUARMState *env, const ARMCPRegInfo *ri) { - return gt_get_countervalue(env) - gt_phys_cnt_offset(env); -} - -uint64_t gt_virt_cnt_offset(CPUARMState *env) -{ - uint64_t hcr; - - switch (arm_current_el(env)) { - case 2: - hcr = arm_hcr_el2_eff(env); - if (hcr & HCR_E2H) { - return 0; - } - break; - case 0: - hcr = arm_hcr_el2_eff(env); - if ((hcr & (HCR_E2H | HCR_TGE)) == (HCR_E2H | HCR_TGE)) { - return 0; - } - break; - } - - return env->cp15.cntvoff_el2; + uint64_t offset = gt_direct_access_timer_offset(env, GTIMER_PHYS); + return gt_get_countervalue(env) - offset; } static uint64_t gt_virt_cnt_read(CPUARMState *env, const ARMCPRegInfo *ri) { - return gt_get_countervalue(env) - gt_virt_cnt_offset(env); + uint64_t offset = gt_direct_access_timer_offset(env, GTIMER_VIRT); + return gt_get_countervalue(env) - offset; } static void gt_cval_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static uint64_t do_tval_read(CPUARMState *env, int timeridx, uint64_t offset) static uint64_t gt_tval_read(CPUARMState *env, const ARMCPRegInfo *ri, int timeridx) { - uint64_t offset = 0; - - switch (timeridx) { - case GTIMER_VIRT: - offset = gt_virt_cnt_offset(env); - break; - case GTIMER_PHYS: - offset = gt_phys_cnt_offset(env); - break; - } + uint64_t offset = gt_direct_access_timer_offset(env, timeridx); return do_tval_read(env, timeridx, offset); } @@ -XXX,XX +XXX,XX @@ static void gt_tval_write(CPUARMState *env, const ARMCPRegInfo *ri, int timeridx, uint64_t value) { - uint64_t offset = 0; + uint64_t offset = gt_direct_access_timer_offset(env, timeridx); - switch (timeridx) { - case GTIMER_VIRT: - offset = gt_virt_cnt_offset(env); - break; - case GTIMER_PHYS: - offset = gt_phys_cnt_offset(env); - break; - } do_tval_write(env, timeridx, value, offset); } diff --git a/target/arm/tcg/op_helper.c b/target/arm/tcg/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/op_helper.c +++ b/target/arm/tcg/op_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(wfit)(CPUARMState *env, uint64_t timeout) int target_el = check_wfx_trap(env, false, &excp); /* The WFIT should time out when CNTVCT_EL0 >= the specified value. */ uint64_t cntval = gt_get_countervalue(env); - uint64_t offset = gt_virt_cnt_offset(env); + /* + * We want the value that we would get if we read CNTVCT_EL0 from + * the current exception level, so the direct_access offset, not + * the indirect_access one. Compare the pseudocode LocalTimeoutEvent(), + * which calls VirtualCounterTimer(). + */ + uint64_t offset = gt_direct_access_timer_offset(env, GTIMER_VIRT); uint64_t cntvct = cntval - offset; uint64_t nexttick; -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> When FEAT_SEL2 was implemented the SEL2 timers were missed. This shows up when building the latest Hafnium with SPMC_AT_EL=2. The actual implementation utilises the same logic as the rest of the timers so all we need to do is: - define the timers and their access functions - conditionally add the correct system registers - create a new accessfn as the rules are subtly different to the existing secure timer Fixes: e9152ee91c (target/arm: add ARMv8.4-SEL2 system registers) Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20250204125009.2281315-7-peter.maydell@linaro.org Cc: qemu-stable@nongnu.org Cc: Andrei Homescu <ahomescu@google.com> Cc: Arve Hjønnevåg <arve@google.com> Cc: Rémi Denis-Courmont <remi.denis.courmont@huawei.com> [PMM: CP_ACCESS_TRAP_UNCATEGORIZED -> CP_ACCESS_UNDEFINED; offset logic now in gt_{indirect,direct}_access_timer_offset() ] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/bsa.h | 2 + target/arm/cpu.h | 2 + target/arm/gtimer.h | 4 +- target/arm/cpu.c | 4 ++ target/arm/helper.c | 163 +++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 174 insertions(+), 1 deletion(-) diff --git a/include/hw/arm/bsa.h b/include/hw/arm/bsa.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/bsa.h +++ b/include/hw/arm/bsa.h @@ -XXX,XX +XXX,XX @@ #define QEMU_ARM_BSA_H /* These are architectural INTID values */ +#define ARCH_TIMER_S_EL2_VIRT_IRQ 19 +#define ARCH_TIMER_S_EL2_IRQ 20 #define VIRTUAL_PMU_IRQ 23 #define ARCH_GIC_MAINT_IRQ 25 #define ARCH_TIMER_NS_EL2_IRQ 26 diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void arm_gt_vtimer_cb(void *opaque); void arm_gt_htimer_cb(void *opaque); void arm_gt_stimer_cb(void *opaque); void arm_gt_hvtimer_cb(void *opaque); +void arm_gt_sel2timer_cb(void *opaque); +void arm_gt_sel2vtimer_cb(void *opaque); unsigned int gt_cntfrq_period_ns(ARMCPU *cpu); void gt_rme_post_el_change(ARMCPU *cpu, void *opaque); diff --git a/target/arm/gtimer.h b/target/arm/gtimer.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/gtimer.h +++ b/target/arm/gtimer.h @@ -XXX,XX +XXX,XX @@ enum { GTIMER_HYP = 2, GTIMER_SEC = 3, GTIMER_HYPVIRT = 4, -#define NUM_GTIMERS 5 + GTIMER_S_EL2_PHYS = 5, /* CNTHPS_* ; only if FEAT_SEL2 */ + GTIMER_S_EL2_VIRT = 6, /* CNTHVS_* ; only if FEAT_SEL2 */ +#define NUM_GTIMERS 7 }; #endif diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) arm_gt_stimer_cb, cpu); cpu->gt_timer[GTIMER_HYPVIRT] = timer_new(QEMU_CLOCK_VIRTUAL, scale, arm_gt_hvtimer_cb, cpu); + cpu->gt_timer[GTIMER_S_EL2_PHYS] = timer_new(QEMU_CLOCK_VIRTUAL, scale, + arm_gt_sel2timer_cb, cpu); + cpu->gt_timer[GTIMER_S_EL2_VIRT] = timer_new(QEMU_CLOCK_VIRTUAL, scale, + arm_gt_sel2vtimer_cb, cpu); } #endif diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult gt_stimer_access(CPUARMState *env, } } +static CPAccessResult gt_sel2timer_access(CPUARMState *env, + const ARMCPRegInfo *ri, + bool isread) +{ + /* + * The AArch64 register view of the secure EL2 timers are mostly + * accessible from EL3 and EL2 although can also be trapped to EL2 + * from EL1 depending on nested virt config. + */ + switch (arm_current_el(env)) { + case 0: /* UNDEFINED */ + return CP_ACCESS_UNDEFINED; + case 1: + if (!arm_is_secure(env)) { + /* UNDEFINED */ + return CP_ACCESS_UNDEFINED; + } else if (arm_hcr_el2_eff(env) & HCR_NV) { + /* Aarch64.SystemAccessTrap(EL2, 0x18) */ + return CP_ACCESS_TRAP_EL2; + } + /* UNDEFINED */ + return CP_ACCESS_UNDEFINED; + case 2: + if (!arm_is_secure(env)) { + /* UNDEFINED */ + return CP_ACCESS_UNDEFINED; + } + return CP_ACCESS_OK; + case 3: + if (env->cp15.scr_el3 & SCR_EEL2) { + return CP_ACCESS_OK; + } else { + return CP_ACCESS_UNDEFINED; + } + default: + g_assert_not_reached(); + } +} + uint64_t gt_get_countervalue(CPUARMState *env) { ARMCPU *cpu = env_archcpu(env); @@ -XXX,XX +XXX,XX @@ static uint64_t gt_indirect_access_timer_offset(CPUARMState *env, int timeridx) case GTIMER_HYP: case GTIMER_SEC: case GTIMER_HYPVIRT: + case GTIMER_S_EL2_PHYS: + case GTIMER_S_EL2_VIRT: return 0; default: g_assert_not_reached(); @@ -XXX,XX +XXX,XX @@ uint64_t gt_direct_access_timer_offset(CPUARMState *env, int timeridx) case GTIMER_HYP: case GTIMER_SEC: case GTIMER_HYPVIRT: + case GTIMER_S_EL2_PHYS: + case GTIMER_S_EL2_VIRT: return 0; default: g_assert_not_reached(); @@ -XXX,XX +XXX,XX @@ static void gt_sec_ctl_write(CPUARMState *env, const ARMCPRegInfo *ri, gt_ctl_write(env, ri, GTIMER_SEC, value); } +static void gt_sec_pel2_timer_reset(CPUARMState *env, const ARMCPRegInfo *ri) +{ + gt_timer_reset(env, ri, GTIMER_S_EL2_PHYS); +} + +static void gt_sec_pel2_cval_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + gt_cval_write(env, ri, GTIMER_S_EL2_PHYS, value); +} + +static uint64_t gt_sec_pel2_tval_read(CPUARMState *env, const ARMCPRegInfo *ri) +{ + return gt_tval_read(env, ri, GTIMER_S_EL2_PHYS); +} + +static void gt_sec_pel2_tval_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + gt_tval_write(env, ri, GTIMER_S_EL2_PHYS, value); +} + +static void gt_sec_pel2_ctl_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + gt_ctl_write(env, ri, GTIMER_S_EL2_PHYS, value); +} + +static void gt_sec_vel2_timer_reset(CPUARMState *env, const ARMCPRegInfo *ri) +{ + gt_timer_reset(env, ri, GTIMER_S_EL2_VIRT); +} + +static void gt_sec_vel2_cval_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + gt_cval_write(env, ri, GTIMER_S_EL2_VIRT, value); +} + +static uint64_t gt_sec_vel2_tval_read(CPUARMState *env, const ARMCPRegInfo *ri) +{ + return gt_tval_read(env, ri, GTIMER_S_EL2_VIRT); +} + +static void gt_sec_vel2_tval_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + gt_tval_write(env, ri, GTIMER_S_EL2_VIRT, value); +} + +static void gt_sec_vel2_ctl_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + gt_ctl_write(env, ri, GTIMER_S_EL2_VIRT, value); +} + static void gt_hv_timer_reset(CPUARMState *env, const ARMCPRegInfo *ri) { gt_timer_reset(env, ri, GTIMER_HYPVIRT); @@ -XXX,XX +XXX,XX @@ void arm_gt_stimer_cb(void *opaque) gt_recalc_timer(cpu, GTIMER_SEC); } +void arm_gt_sel2timer_cb(void *opaque) +{ + ARMCPU *cpu = opaque; + + gt_recalc_timer(cpu, GTIMER_S_EL2_PHYS); +} + +void arm_gt_sel2vtimer_cb(void *opaque) +{ + ARMCPU *cpu = opaque; + + gt_recalc_timer(cpu, GTIMER_S_EL2_VIRT); +} + void arm_gt_hvtimer_cb(void *opaque) { ARMCPU *cpu = opaque; @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo el2_sec_cp_reginfo[] = { .access = PL2_RW, .accessfn = sel2_access, .nv2_redirect_offset = 0x48, .fieldoffset = offsetof(CPUARMState, cp15.vstcr_el2) }, +#ifndef CONFIG_USER_ONLY + /* Secure EL2 Physical Timer */ + { .name = "CNTHPS_TVAL_EL2", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 5, .opc2 = 0, + .type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL2_RW, + .accessfn = gt_sel2timer_access, + .readfn = gt_sec_pel2_tval_read, + .writefn = gt_sec_pel2_tval_write, + .resetfn = gt_sec_pel2_timer_reset, + }, + { .name = "CNTHPS_CTL_EL2", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 5, .opc2 = 1, + .type = ARM_CP_IO, .access = PL2_RW, + .accessfn = gt_sel2timer_access, + .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_S_EL2_PHYS].ctl), + .resetvalue = 0, + .writefn = gt_sec_pel2_ctl_write, .raw_writefn = raw_write, + }, + { .name = "CNTHPS_CVAL_EL2", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 5, .opc2 = 2, + .type = ARM_CP_IO, .access = PL2_RW, + .accessfn = gt_sel2timer_access, + .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_S_EL2_PHYS].cval), + .writefn = gt_sec_pel2_cval_write, .raw_writefn = raw_write, + }, + /* Secure EL2 Virtual Timer */ + { .name = "CNTHVS_TVAL_EL2", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 4, .opc2 = 0, + .type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL2_RW, + .accessfn = gt_sel2timer_access, + .readfn = gt_sec_vel2_tval_read, + .writefn = gt_sec_vel2_tval_write, + .resetfn = gt_sec_vel2_timer_reset, + }, + { .name = "CNTHVS_CTL_EL2", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 4, .opc2 = 1, + .type = ARM_CP_IO, .access = PL2_RW, + .accessfn = gt_sel2timer_access, + .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_S_EL2_VIRT].ctl), + .resetvalue = 0, + .writefn = gt_sec_vel2_ctl_write, .raw_writefn = raw_write, + }, + { .name = "CNTHVS_CVAL_EL2", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 4, .opc2 = 2, + .type = ARM_CP_IO, .access = PL2_RW, + .accessfn = gt_sel2timer_access, + .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_S_EL2_VIRT].cval), + .writefn = gt_sec_vel2_cval_write, .raw_writefn = raw_write, + }, +#endif }; static CPAccessResult nsacr_access(CPUARMState *env, const ARMCPRegInfo *ri, -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> As we are about to add more physical and virtual timers let's make it clear what each timer does. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20250204125009.2281315-8-peter.maydell@linaro.org [PMM: Add timer register name prefix to each comment] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/gtimer.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/target/arm/gtimer.h b/target/arm/gtimer.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/gtimer.h +++ b/target/arm/gtimer.h @@ -XXX,XX +XXX,XX @@ #define TARGET_ARM_GTIMER_H enum { - GTIMER_PHYS = 0, - GTIMER_VIRT = 1, - GTIMER_HYP = 2, - GTIMER_SEC = 3, - GTIMER_HYPVIRT = 4, + GTIMER_PHYS = 0, /* CNTP_* ; EL1 physical timer */ + GTIMER_VIRT = 1, /* CNTV_* ; EL1 virtual timer */ + GTIMER_HYP = 2, /* CNTHP_* ; EL2 physical timer */ + GTIMER_SEC = 3, /* CNTPS_* ; EL3 physical timer */ + GTIMER_HYPVIRT = 4, /* CNTHV_* ; EL2 virtual timer ; only if FEAT_VHE */ GTIMER_S_EL2_PHYS = 5, /* CNTHPS_* ; only if FEAT_SEL2 */ GTIMER_S_EL2_VIRT = 6, /* CNTHVS_* ; only if FEAT_SEL2 */ #define NUM_GTIMERS 7 -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20250204125009.2281315-9-peter.maydell@linaro.org Cc: qemu-stable@nongnu.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void create_gic(VirtMachineState *vms, MemoryRegion *mem) [GTIMER_HYP] = ARCH_TIMER_NS_EL2_IRQ, [GTIMER_SEC] = ARCH_TIMER_S_EL1_IRQ, [GTIMER_HYPVIRT] = ARCH_TIMER_NS_EL2_VIRT_IRQ, + [GTIMER_S_EL2_PHYS] = ARCH_TIMER_S_EL2_IRQ, + [GTIMER_S_EL2_VIRT] = ARCH_TIMER_S_EL2_VIRT_IRQ, }; for (unsigned irq = 0; irq < ARRAY_SIZE(timer_irq); irq++) { -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20250204125009.2281315-10-peter.maydell@linaro.org Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/sbsa-ref.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/sbsa-ref.c +++ b/hw/arm/sbsa-ref.c @@ -XXX,XX +XXX,XX @@ static void create_gic(SBSAMachineState *sms, MemoryRegion *mem) [GTIMER_HYP] = ARCH_TIMER_NS_EL2_IRQ, [GTIMER_SEC] = ARCH_TIMER_S_EL1_IRQ, [GTIMER_HYPVIRT] = ARCH_TIMER_NS_EL2_VIRT_IRQ, + [GTIMER_S_EL2_PHYS] = ARCH_TIMER_S_EL2_IRQ, + [GTIMER_S_EL2_VIRT] = ARCH_TIMER_S_EL2_VIRT_IRQ, }; for (irq = 0; irq < ARRAY_SIZE(timer_irq); irq++) { -- 2.43.0 Our LDRD implementation is wrong in two respects: * if the address is 4-aligned and the load crosses a page boundary and the second load faults and the first load was to the base register (as in cases like "ldrd r2, r3, [r2]", then we must not update the base register before taking the fault * if the address is 8-aligned the access must be a 64-bit single-copy atomic access, not two 32-bit accesses Rewrite the handling of the loads in LDRD to use a single tcg_gen_qemu_ld_i64() and split the result into the destination registers. This allows us to get the atomicity requirements right, and also implicitly means that we won't update the base register too early for the page-crossing case. Note that because we no longer increment 'addr' by 4 in the course of performing the LDRD we must change the adjustment value we pass to op_addr_ri_post() and op_addr_rr_post(): it no longer needs to subtract 4 to get the correct value to use if doing base register writeback. STRD has the same problem with not getting the atomicity right; we will deal with that in the following commit. Cc: qemu-stable@nongnu.org Reported-by: Stu Grossman <stu.grossman@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20250227142746.1698904-2-peter.maydell@linaro.org --- target/arm/tcg/translate.c | 70 +++++++++++++++++++++++++------------- 1 file changed, 46 insertions(+), 24 deletions(-) diff --git a/target/arm/tcg/translate.c b/target/arm/tcg/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate.c +++ b/target/arm/tcg/translate.c @@ -XXX,XX +XXX,XX @@ static bool op_store_rr(DisasContext *s, arg_ldst_rr *a, return true; } +static void do_ldrd_load(DisasContext *s, TCGv_i32 addr, int rt, int rt2) +{ + /* + * LDRD is required to be an atomic 64-bit access if the + * address is 8-aligned, two atomic 32-bit accesses if + * it's only 4-aligned, and to give an alignment fault + * if it's not 4-aligned. This is MO_ALIGN_4 | MO_ATOM_SUBALIGN. + * Rt is always the word from the lower address, and Rt2 the + * data from the higher address, regardless of endianness. + * So (like gen_load_exclusive) we avoid gen_aa32_ld_i64() + * so we don't get its SCTLR_B check, and instead do a 64-bit access + * using MO_BE if appropriate and then split the two halves. + * + * For M-profile, and for A-profile before LPAE, the 64-bit + * atomicity is not required. We could model that using + * the looser MO_ATOM_IFALIGN_PAIR, but providing a higher + * level of atomicity than required is harmless (we would not + * currently generate better code for IFALIGN_PAIR here). + * + * This also gives us the correct behaviour of not updating + * rt if the load of rt2 faults; this is required for cases + * like "ldrd r2, r3, [r2]" where rt is also the base register. + */ + int mem_idx = get_mem_index(s); + MemOp opc = MO_64 | MO_ALIGN_4 | MO_ATOM_SUBALIGN | s->be_data; + TCGv taddr = gen_aa32_addr(s, addr, opc); + TCGv_i64 t64 = tcg_temp_new_i64(); + TCGv_i32 tmp = tcg_temp_new_i32(); + TCGv_i32 tmp2 = tcg_temp_new_i32(); + + tcg_gen_qemu_ld_i64(t64, taddr, mem_idx, opc); + if (s->be_data == MO_BE) { + tcg_gen_extr_i64_i32(tmp2, tmp, t64); + } else { + tcg_gen_extr_i64_i32(tmp, tmp2, t64); + } + store_reg(s, rt, tmp); + store_reg(s, rt2, tmp2); +} + static bool trans_LDRD_rr(DisasContext *s, arg_ldst_rr *a) { - int mem_idx = get_mem_index(s); - TCGv_i32 addr, tmp; + TCGv_i32 addr; if (!ENABLE_ARCH_5TE) { return false; @@ -XXX,XX +XXX,XX @@ static bool trans_LDRD_rr(DisasContext *s, arg_ldst_rr *a) } addr = op_addr_rr_pre(s, a); - tmp = tcg_temp_new_i32(); - gen_aa32_ld_i32(s, tmp, addr, mem_idx, MO_UL | MO_ALIGN); - store_reg(s, a->rt, tmp); - - tcg_gen_addi_i32(addr, addr, 4); - - tmp = tcg_temp_new_i32(); - gen_aa32_ld_i32(s, tmp, addr, mem_idx, MO_UL | MO_ALIGN); - store_reg(s, a->rt + 1, tmp); + do_ldrd_load(s, addr, a->rt, a->rt + 1); /* LDRD w/ base writeback is undefined if the registers overlap. */ - op_addr_rr_post(s, a, addr, -4); + op_addr_rr_post(s, a, addr, 0); return true; } @@ -XXX,XX +XXX,XX @@ static bool op_store_ri(DisasContext *s, arg_ldst_ri *a, static bool op_ldrd_ri(DisasContext *s, arg_ldst_ri *a, int rt2) { - int mem_idx = get_mem_index(s); - TCGv_i32 addr, tmp; + TCGv_i32 addr; addr = op_addr_ri_pre(s, a); - tmp = tcg_temp_new_i32(); - gen_aa32_ld_i32(s, tmp, addr, mem_idx, MO_UL | MO_ALIGN); - store_reg(s, a->rt, tmp); - - tcg_gen_addi_i32(addr, addr, 4); - - tmp = tcg_temp_new_i32(); - gen_aa32_ld_i32(s, tmp, addr, mem_idx, MO_UL | MO_ALIGN); - store_reg(s, rt2, tmp); + do_ldrd_load(s, addr, a->rt, rt2); /* LDRD w/ base writeback is undefined if the registers overlap. */ - op_addr_ri_post(s, a, addr, -4); + op_addr_ri_post(s, a, addr, 0); return true; } -- 2.43.0 Our STRD implementation doesn't correctly implement the requirement: * if the address is 8-aligned the access must be a 64-bit single-copy atomic access, not two 32-bit accesses Rewrite the handling of STRD to use a single tcg_gen_qemu_st_i64() of a value produced by concatenating the two 32 bit source registers. This allows us to get the atomicity right. As with the LDRD change, now that we don't update 'addr' in the course of performing the store we need to adjust the offset we pass to op_addr_ri_post() and op_addr_rr_post(). Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20250227142746.1698904-3-peter.maydell@linaro.org --- target/arm/tcg/translate.c | 59 +++++++++++++++++++++++++------------- 1 file changed, 39 insertions(+), 20 deletions(-) diff --git a/target/arm/tcg/translate.c b/target/arm/tcg/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate.c +++ b/target/arm/tcg/translate.c @@ -XXX,XX +XXX,XX @@ static bool trans_LDRD_rr(DisasContext *s, arg_ldst_rr *a) return true; } +static void do_strd_store(DisasContext *s, TCGv_i32 addr, int rt, int rt2) +{ + /* + * STRD is required to be an atomic 64-bit access if the + * address is 8-aligned, two atomic 32-bit accesses if + * it's only 4-aligned, and to give an alignment fault + * if it's not 4-aligned. + * Rt is always the word from the lower address, and Rt2 the + * data from the higher address, regardless of endianness. + * So (like gen_store_exclusive) we avoid gen_aa32_ld_i64() + * so we don't get its SCTLR_B check, and instead do a 64-bit access + * using MO_BE if appropriate, using a value constructed + * by putting the two halves together in the right order. + * + * As with LDRD, the 64-bit atomicity is not required for + * M-profile, or for A-profile before LPAE, and we provide + * the higher guarantee always for simplicity. + */ + int mem_idx = get_mem_index(s); + MemOp opc = MO_64 | MO_ALIGN_4 | MO_ATOM_SUBALIGN | s->be_data; + TCGv taddr = gen_aa32_addr(s, addr, opc); + TCGv_i32 t1 = load_reg(s, rt); + TCGv_i32 t2 = load_reg(s, rt2); + TCGv_i64 t64 = tcg_temp_new_i64(); + + if (s->be_data == MO_BE) { + tcg_gen_concat_i32_i64(t64, t2, t1); + } else { + tcg_gen_concat_i32_i64(t64, t1, t2); + } + tcg_gen_qemu_st_i64(t64, taddr, mem_idx, opc); +} + static bool trans_STRD_rr(DisasContext *s, arg_ldst_rr *a) { - int mem_idx = get_mem_index(s); - TCGv_i32 addr, tmp; + TCGv_i32 addr; if (!ENABLE_ARCH_5TE) { return false; @@ -XXX,XX +XXX,XX @@ static bool trans_STRD_rr(DisasContext *s, arg_ldst_rr *a) } addr = op_addr_rr_pre(s, a); - tmp = load_reg(s, a->rt); - gen_aa32_st_i32(s, tmp, addr, mem_idx, MO_UL | MO_ALIGN); + do_strd_store(s, addr, a->rt, a->rt + 1); - tcg_gen_addi_i32(addr, addr, 4); - - tmp = load_reg(s, a->rt + 1); - gen_aa32_st_i32(s, tmp, addr, mem_idx, MO_UL | MO_ALIGN); - - op_addr_rr_post(s, a, addr, -4); + op_addr_rr_post(s, a, addr, 0); return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_LDRD_ri_t32(DisasContext *s, arg_ldst_ri2 *a) static bool op_strd_ri(DisasContext *s, arg_ldst_ri *a, int rt2) { - int mem_idx = get_mem_index(s); - TCGv_i32 addr, tmp; + TCGv_i32 addr; addr = op_addr_ri_pre(s, a); - tmp = load_reg(s, a->rt); - gen_aa32_st_i32(s, tmp, addr, mem_idx, MO_UL | MO_ALIGN); + do_strd_store(s, addr, a->rt, rt2); - tcg_gen_addi_i32(addr, addr, 4); - - tmp = load_reg(s, rt2); - gen_aa32_st_i32(s, tmp, addr, mem_idx, MO_UL | MO_ALIGN); - - op_addr_ri_post(s, a, addr, -4); + op_addr_ri_post(s, a, addr, 0); return true; } -- 2.43.0 All the callers of op_addr_rr_post() and op_addr_ri_post() now pass in zero for the address_offset, so we can remove that argument. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20250227142746.1698904-4-peter.maydell@linaro.org --- target/arm/tcg/translate.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/target/arm/tcg/translate.c b/target/arm/tcg/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate.c +++ b/target/arm/tcg/translate.c @@ -XXX,XX +XXX,XX @@ static TCGv_i32 op_addr_rr_pre(DisasContext *s, arg_ldst_rr *a) } static void op_addr_rr_post(DisasContext *s, arg_ldst_rr *a, - TCGv_i32 addr, int address_offset) + TCGv_i32 addr) { if (!a->p) { TCGv_i32 ofs = load_reg(s, a->rm); @@ -XXX,XX +XXX,XX @@ static void op_addr_rr_post(DisasContext *s, arg_ldst_rr *a, } else if (!a->w) { return; } - tcg_gen_addi_i32(addr, addr, address_offset); store_reg(s, a->rn, addr); } @@ -XXX,XX +XXX,XX @@ static bool op_load_rr(DisasContext *s, arg_ldst_rr *a, * Perform base writeback before the loaded value to * ensure correct behavior with overlapping index registers. */ - op_addr_rr_post(s, a, addr, 0); + op_addr_rr_post(s, a, addr); store_reg_from_load(s, a->rt, tmp); return true; } @@ -XXX,XX +XXX,XX @@ static bool op_store_rr(DisasContext *s, arg_ldst_rr *a, gen_aa32_st_i32(s, tmp, addr, mem_idx, mop); disas_set_da_iss(s, mop, issinfo); - op_addr_rr_post(s, a, addr, 0); + op_addr_rr_post(s, a, addr); return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_LDRD_rr(DisasContext *s, arg_ldst_rr *a) do_ldrd_load(s, addr, a->rt, a->rt + 1); /* LDRD w/ base writeback is undefined if the registers overlap. */ - op_addr_rr_post(s, a, addr, 0); + op_addr_rr_post(s, a, addr); return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_STRD_rr(DisasContext *s, arg_ldst_rr *a) do_strd_store(s, addr, a->rt, a->rt + 1); - op_addr_rr_post(s, a, addr, 0); + op_addr_rr_post(s, a, addr); return true; } @@ -XXX,XX +XXX,XX @@ static TCGv_i32 op_addr_ri_pre(DisasContext *s, arg_ldst_ri *a) } static void op_addr_ri_post(DisasContext *s, arg_ldst_ri *a, - TCGv_i32 addr, int address_offset) + TCGv_i32 addr) { + int address_offset = 0; if (!a->p) { if (a->u) { - address_offset += a->imm; + address_offset = a->imm; } else { - address_offset -= a->imm; + address_offset = -a->imm; } } else if (!a->w) { return; @@ -XXX,XX +XXX,XX @@ static bool op_load_ri(DisasContext *s, arg_ldst_ri *a, * Perform base writeback before the loaded value to * ensure correct behavior with overlapping index registers. */ - op_addr_ri_post(s, a, addr, 0); + op_addr_ri_post(s, a, addr); store_reg_from_load(s, a->rt, tmp); return true; } @@ -XXX,XX +XXX,XX @@ static bool op_store_ri(DisasContext *s, arg_ldst_ri *a, gen_aa32_st_i32(s, tmp, addr, mem_idx, mop); disas_set_da_iss(s, mop, issinfo); - op_addr_ri_post(s, a, addr, 0); + op_addr_ri_post(s, a, addr); return true; } @@ -XXX,XX +XXX,XX @@ static bool op_ldrd_ri(DisasContext *s, arg_ldst_ri *a, int rt2) do_ldrd_load(s, addr, a->rt, rt2); /* LDRD w/ base writeback is undefined if the registers overlap. */ - op_addr_ri_post(s, a, addr, 0); + op_addr_ri_post(s, a, addr); return true; } @@ -XXX,XX +XXX,XX @@ static bool op_strd_ri(DisasContext *s, arg_ldst_ri *a, int rt2) do_strd_store(s, addr, a->rt, rt2); - op_addr_ri_post(s, a, addr, 0); + op_addr_ri_post(s, a, addr); return true; } -- 2.43.0 In debug_helper.c we provide a few dummy versions of debug registers: * DBGVCR (AArch32 only): enable bits for vector-catch debug events * MDCCINT_EL1: interrupt enable bits for the DCC debug communications channel * DBGVCR32_EL2: the AArch64 accessor for the state in DBGVCR We implemented these only to stop Linux crashing on startup, but we chose to implement them as ARM_CP_NOP. This worked for Linux where it only cares about trying to write to these registers, but is very confusing behaviour for anything that wants to read the registers (perhaps for context state switches), because the destination register will be left with whatever random value it happened to have before the read. Model these registers instead as RAZ. Fixes: 5e8b12ffbb8c68 ("target-arm: Implement minimal DBGVCR, OSDLR_EL1, MDCCSR_EL0") Fixes: 5dbdc4342f479d ("target-arm: Implement dummy MDCCINT_EL1") Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2708 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20250228162424.1917269-1-peter.maydell@linaro.org --- target/arm/debug_helper.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/target/arm/debug_helper.c b/target/arm/debug_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/debug_helper.c +++ b/target/arm/debug_helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo debug_cp_reginfo[] = { { .name = "DBGVCR", .cp = 14, .opc1 = 0, .crn = 0, .crm = 7, .opc2 = 0, .access = PL1_RW, .accessfn = access_tda, - .type = ARM_CP_NOP }, + .type = ARM_CP_CONST, .resetvalue = 0 }, /* * Dummy MDCCINT_EL1, since we don't implement the Debug Communications * Channel but Linux may try to access this register. The 32-bit @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo debug_cp_reginfo[] = { { .name = "MDCCINT_EL1", .state = ARM_CP_STATE_BOTH, .cp = 14, .opc0 = 2, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 0, .access = PL1_RW, .accessfn = access_tdcc, - .type = ARM_CP_NOP }, + .type = ARM_CP_CONST, .resetvalue = 0 }, /* * Dummy DBGCLAIM registers. * "The architecture does not define any functionality for the CLAIM tag bits.", @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo debug_aa32_el1_reginfo[] = { { .name = "DBGVCR32_EL2", .state = ARM_CP_STATE_AA64, .opc0 = 2, .opc1 = 4, .crn = 0, .crm = 7, .opc2 = 0, .access = PL2_RW, .accessfn = access_dbgvcr32, - .type = ARM_CP_NOP | ARM_CP_EL3_NO_EL2_KEEP }, + .type = ARM_CP_CONST | ARM_CP_EL3_NO_EL2_KEEP, + .resetvalue = 0 }, }; static const ARMCPRegInfo debug_lpae_cp_reginfo[] = { -- 2.43.0 Currently we call icount_start_warp_timer() from timerlist_rearm(). This produces incorrect behaviour, because timerlist_rearm() is called, for instance, when a timer callback modifies its timer. We cannot decide here to warp the timer forwards to the next timer deadline merely because all_cpu_threads_idle() is true, because the timer callback we were called from (or some other callback later in the list of callbacks being invoked) may be about to raise a CPU interrupt and move a CPU from idle to ready. The only valid place to choose to warp the timer forward is from the main loop, when we know we have no outstanding IO or timer callbacks that might be about to wake up a CPU. For Arm guests, this bug was mostly latent until the refactoring commit f6fc36deef6abc ("target/arm/helper: Implement CNTHCTL_EL2.CNT[VP]MASK"), which exposed it because it refactored a timer callback so that it happened to call timer_mod() first and raise the interrupt second, when it had previously raised the interrupt first and called timer_mod() afterwards. This call seems to have originally derived from the pre-record-and-replay icount code, which (as of e.g. commit db1a49726c3c in 2010) in this location did a call to qemu_notify_event(), necessary to get the icount code in the vCPU round-robin thread to stop and recalculate the icount deadline when a timer was reprogrammed from the IO thread. In current QEMU, everything is done on the vCPU thread when we are in icount mode, so there's no need to try to notify another thread here. I suspect that the other reason why this call was doing icount timer warping is that it pre-dates commit efab87cf79077a from 2015, which added a call to icount_start_warp_timer() to main_loop_wait(). Once the call in timerlist_rearm() has been removed, if the timer callbacks don't cause any CPU to be woken up then we will end up calling icount_start_warp_timer() from main_loop_wait() when the rr main loop code calls rr_wait_io_event(). Remove the incorrect call from timerlist_rearm(). Cc: qemu-stable@nongnu.org Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2703 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20250210135804.3526943-1-peter.maydell@linaro.org --- util/qemu-timer.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/util/qemu-timer.c b/util/qemu-timer.c index XXXXXXX..XXXXXXX 100644 --- a/util/qemu-timer.c +++ b/util/qemu-timer.c @@ -XXX,XX +XXX,XX @@ static bool timer_mod_ns_locked(QEMUTimerList *timer_list, static void timerlist_rearm(QEMUTimerList *timer_list) { - /* Interrupt execution to force deadline recalculation. */ - if (icount_enabled() && timer_list->clock->type == QEMU_CLOCK_VIRTUAL) { - icount_start_warp_timer(); - } timerlist_notify(timer_list); } -- 2.43.0 Expand the example in the comment documenting MO_ATOM_SUBALIGN, to be clearer about the atomicity guarantees it represents. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20250228103222.1838913-1-peter.maydell@linaro.org --- include/exec/memop.h | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/include/exec/memop.h b/include/exec/memop.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/memop.h +++ b/include/exec/memop.h @@ -XXX,XX +XXX,XX @@ typedef enum MemOp { * Depending on alignment, one or both will be single-copy atomic. * This is the atomicity e.g. of Arm FEAT_LSE2 LDP. * MO_ATOM_SUBALIGN: the operation is single-copy atomic by parts - * by the alignment. E.g. if the address is 0 mod 4, then each - * 4-byte subobject is single-copy atomic. + * by the alignment. E.g. if an 8-byte value is accessed at an + * address which is 0 mod 8, then the whole 8-byte access is + * single-copy atomic; otherwise, if it is accessed at 0 mod 4 + * then each 4-byte subobject is single-copy atomic; otherwise + * if it is accessed at 0 mod 2 then the four 2-byte subobjects + * are single-copy atomic. * This is the atomicity e.g. of IBM Power. * MO_ATOM_NONE: the operation has no atomicity requirements. * -- 2.43.0 From: JianChunfu <jansef.jian@hj-micro.com> Use a similar terminology smmu_hash_remove_by_sid_range() as the one being used for other hash table matching functions since smmuv3_invalidate_ste() name is not self explanatory, and introduce a helper that invokes the g_hash_table_foreach_remove. No functional change intended. Signed-off-by: JianChunfu <jansef.jian@hj-micro.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20250228031438.3916-1-jansef.jian@hj-micro.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/smmu-internal.h | 5 ----- include/hw/arm/smmu-common.h | 6 ++++++ hw/arm/smmu-common.c | 21 +++++++++++++++++++++ hw/arm/smmuv3.c | 19 ++----------------- hw/arm/trace-events | 3 ++- 5 files changed, 31 insertions(+), 23 deletions(-) diff --git a/hw/arm/smmu-internal.h b/hw/arm/smmu-internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-internal.h +++ b/hw/arm/smmu-internal.h @@ -XXX,XX +XXX,XX @@ typedef struct SMMUIOTLBPageInvInfo { uint64_t mask; } SMMUIOTLBPageInvInfo; -typedef struct SMMUSIDRange { - uint32_t start; - uint32_t end; -} SMMUSIDRange; - #endif diff --git a/include/hw/arm/smmu-common.h b/include/hw/arm/smmu-common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/smmu-common.h +++ b/include/hw/arm/smmu-common.h @@ -XXX,XX +XXX,XX @@ typedef struct SMMUIOTLBKey { uint8_t level; } SMMUIOTLBKey; +typedef struct SMMUSIDRange { + uint32_t start; + uint32_t end; +} SMMUSIDRange; + struct SMMUState { /* <private> */ SysBusDevice dev; @@ -XXX,XX +XXX,XX @@ void smmu_iotlb_inv_iova(SMMUState *s, int asid, int vmid, dma_addr_t iova, uint8_t tg, uint64_t num_pages, uint8_t ttl); void smmu_iotlb_inv_ipa(SMMUState *s, int vmid, dma_addr_t ipa, uint8_t tg, uint64_t num_pages, uint8_t ttl); +void smmu_configs_inv_sid_range(SMMUState *s, SMMUSIDRange sid_range); /* Unmap the range of all the notifiers registered to any IOMMU mr */ void smmu_inv_notifiers_all(SMMUState *s); diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-common.c +++ b/hw/arm/smmu-common.c @@ -XXX,XX +XXX,XX @@ static gboolean smmu_hash_remove_by_vmid_ipa(gpointer key, gpointer value, ((entry->iova & ~info->mask) == info->iova); } +static gboolean +smmu_hash_remove_by_sid_range(gpointer key, gpointer value, gpointer user_data) +{ + SMMUDevice *sdev = (SMMUDevice *)key; + uint32_t sid = smmu_get_sid(sdev); + SMMUSIDRange *sid_range = (SMMUSIDRange *)user_data; + + if (sid < sid_range->start || sid > sid_range->end) { + return false; + } + trace_smmu_config_cache_inv(sid); + return true; +} + +void smmu_configs_inv_sid_range(SMMUState *s, SMMUSIDRange sid_range) +{ + trace_smmu_configs_inv_sid_range(sid_range.start, sid_range.end); + g_hash_table_foreach_remove(s->configs, smmu_hash_remove_by_sid_range, + &sid_range); +} + void smmu_iotlb_inv_iova(SMMUState *s, int asid, int vmid, dma_addr_t iova, uint8_t tg, uint64_t num_pages, uint8_t ttl) { diff --git a/hw/arm/smmuv3.c b/hw/arm/smmuv3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3.c +++ b/hw/arm/smmuv3.c @@ -XXX,XX +XXX,XX @@ static void smmuv3_flush_config(SMMUDevice *sdev) SMMUv3State *s = sdev->smmu; SMMUState *bc = &s->smmu_state; - trace_smmuv3_config_cache_inv(smmu_get_sid(sdev)); + trace_smmu_config_cache_inv(smmu_get_sid(sdev)); g_hash_table_remove(bc->configs, sdev); } @@ -XXX,XX +XXX,XX @@ static void smmuv3_range_inval(SMMUState *s, Cmd *cmd, SMMUStage stage) } } -static gboolean -smmuv3_invalidate_ste(gpointer key, gpointer value, gpointer user_data) -{ - SMMUDevice *sdev = (SMMUDevice *)key; - uint32_t sid = smmu_get_sid(sdev); - SMMUSIDRange *sid_range = (SMMUSIDRange *)user_data; - - if (sid < sid_range->start || sid > sid_range->end) { - return false; - } - trace_smmuv3_config_cache_inv(sid); - return true; -} - static int smmuv3_cmdq_consume(SMMUv3State *s) { SMMUState *bs = ARM_SMMU(s); @@ -XXX,XX +XXX,XX @@ static int smmuv3_cmdq_consume(SMMUv3State *s) sid_range.end = sid_range.start + mask; trace_smmuv3_cmdq_cfgi_ste_range(sid_range.start, sid_range.end); - g_hash_table_foreach_remove(bs->configs, smmuv3_invalidate_ste, - &sid_range); + smmu_configs_inv_sid_range(bs, sid_range); break; } case SMMU_CMD_CFGI_CD: diff --git a/hw/arm/trace-events b/hw/arm/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/trace-events +++ b/hw/arm/trace-events @@ -XXX,XX +XXX,XX @@ smmu_iotlb_inv_asid_vmid(int asid, int vmid) "IOTLB invalidate asid=%d vmid=%d" smmu_iotlb_inv_vmid(int vmid) "IOTLB invalidate vmid=%d" smmu_iotlb_inv_vmid_s1(int vmid) "IOTLB invalidate vmid=%d" smmu_iotlb_inv_iova(int asid, uint64_t addr) "IOTLB invalidate asid=%d addr=0x%"PRIx64 +smmu_configs_inv_sid_range(uint32_t start, uint32_t end) "Config cache INV SID range from 0x%x to 0x%x" +smmu_config_cache_inv(uint32_t sid) "Config cache INV for sid=0x%x" smmu_inv_notifiers_mr(const char *name) "iommu mr=%s" smmu_iotlb_lookup_hit(int asid, int vmid, uint64_t addr, uint32_t hit, uint32_t miss, uint32_t p) "IOTLB cache HIT asid=%d vmid=%d addr=0x%"PRIx64" hit=%d miss=%d hit rate=%d" smmu_iotlb_lookup_miss(int asid, int vmid, uint64_t addr, uint32_t hit, uint32_t miss, uint32_t p) "IOTLB cache MISS asid=%d vmid=%d addr=0x%"PRIx64" hit=%d miss=%d hit rate=%d" @@ -XXX,XX +XXX,XX @@ smmuv3_cmdq_tlbi_nh(int vmid) "vmid=%d" smmuv3_cmdq_tlbi_nsnh(void) "" smmuv3_cmdq_tlbi_nh_asid(int asid) "asid=%d" smmuv3_cmdq_tlbi_s12_vmid(int vmid) "vmid=%d" -smmuv3_config_cache_inv(uint32_t sid) "Config cache INV for sid=0x%x" smmuv3_notify_flag_add(const char *iommu) "ADD SMMUNotifier node for iommu mr=%s" smmuv3_notify_flag_del(const char *iommu) "DEL SMMUNotifier node for iommu mr=%s" smmuv3_inv_notifiers_iova(const char *name, int asid, int vmid, uint64_t iova, uint8_t tg, uint64_t num_pages, int stage) "iommu mr=%s asid=%d vmid=%d iova=0x%"PRIx64" tg=%d num_pages=0x%"PRIx64" stage=%d" -- 2.43.0 From: Keith Packard <keithp@keithp.com> The documentation says the vector is at 0xffffff80, instead of the previous value of 0xffffffc0. That value must have been a bug because the standard vector values (20, 21, 23, 25, 30) were all past the end of the array. Signed-off-by: Keith Packard <keithp@keithp.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/rx/helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/rx/helper.c b/target/rx/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/rx/helper.c +++ b/target/rx/helper.c @@ -XXX,XX +XXX,XX @@ void rx_cpu_do_interrupt(CPUState *cs) cpu_stl_data(env, env->isp, env->pc); if (vec < 0x100) { - env->pc = cpu_ldl_data(env, 0xffffffc0 + vec * 4); + env->pc = cpu_ldl_data(env, 0xffffff80 + vec * 4); } else { env->pc = cpu_ldl_data(env, env->intb + (vec & 0xff) * 4); } -- 2.43.0 From: Keith Packard <keithp@keithp.com> Functions which modify TCG globals must not be marked TCG_CALL_NO_WG, as that tells the optimizer that TCG global values already loaded in machine registers are still valid, and so any changes which these helpers make to the CPU state may be ignored. The target/rx code chooses to put (among other things) all the PSW bits and also ACC into globals, so the NO_WG flag on various functions that touch the PSW or ACC is incorrect and must be removed. This includes all the floating point helper functions, because update_fpsw() will update PSW Z and S. Signed-off-by: Keith Packard <keithp@keithp.com> [PMM: Clarified commit message] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/rx/helper.h | 34 +++++++++++++++++----------------- 1 file changed, 17 insertions(+), 17 deletions(-) diff --git a/target/rx/helper.h b/target/rx/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/rx/helper.h +++ b/target/rx/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_1(raise_privilege_violation, noreturn, env) DEF_HELPER_1(wait, noreturn, env) DEF_HELPER_2(rxint, noreturn, env, i32) DEF_HELPER_1(rxbrk, noreturn, env) -DEF_HELPER_FLAGS_3(fadd, TCG_CALL_NO_WG, f32, env, f32, f32) -DEF_HELPER_FLAGS_3(fsub, TCG_CALL_NO_WG, f32, env, f32, f32) -DEF_HELPER_FLAGS_3(fmul, TCG_CALL_NO_WG, f32, env, f32, f32) -DEF_HELPER_FLAGS_3(fdiv, TCG_CALL_NO_WG, f32, env, f32, f32) -DEF_HELPER_FLAGS_3(fcmp, TCG_CALL_NO_WG, void, env, f32, f32) -DEF_HELPER_FLAGS_2(ftoi, TCG_CALL_NO_WG, i32, env, f32) -DEF_HELPER_FLAGS_2(round, TCG_CALL_NO_WG, i32, env, f32) -DEF_HELPER_FLAGS_2(itof, TCG_CALL_NO_WG, f32, env, i32) +DEF_HELPER_3(fadd, f32, env, f32, f32) +DEF_HELPER_3(fsub, f32, env, f32, f32) +DEF_HELPER_3(fmul, f32, env, f32, f32) +DEF_HELPER_3(fdiv, f32, env, f32, f32) +DEF_HELPER_3(fcmp, void, env, f32, f32) +DEF_HELPER_2(ftoi, i32, env, f32) +DEF_HELPER_2(round, i32, env, f32) +DEF_HELPER_2(itof, f32, env, i32) DEF_HELPER_2(set_fpsw, void, env, i32) -DEF_HELPER_FLAGS_2(racw, TCG_CALL_NO_WG, void, env, i32) -DEF_HELPER_FLAGS_2(set_psw_rte, TCG_CALL_NO_WG, void, env, i32) -DEF_HELPER_FLAGS_2(set_psw, TCG_CALL_NO_WG, void, env, i32) +DEF_HELPER_2(racw, void, env, i32) +DEF_HELPER_2(set_psw_rte, void, env, i32) +DEF_HELPER_2(set_psw, void, env, i32) DEF_HELPER_1(pack_psw, i32, env) -DEF_HELPER_FLAGS_3(div, TCG_CALL_NO_WG, i32, env, i32, i32) -DEF_HELPER_FLAGS_3(divu, TCG_CALL_NO_WG, i32, env, i32, i32) -DEF_HELPER_FLAGS_1(scmpu, TCG_CALL_NO_WG, void, env) +DEF_HELPER_3(div, i32, env, i32, i32) +DEF_HELPER_3(divu, i32, env, i32, i32) +DEF_HELPER_1(scmpu, void, env) DEF_HELPER_1(smovu, void, env) DEF_HELPER_1(smovf, void, env) DEF_HELPER_1(smovb, void, env) DEF_HELPER_2(sstr, void, env, i32) -DEF_HELPER_FLAGS_2(swhile, TCG_CALL_NO_WG, void, env, i32) -DEF_HELPER_FLAGS_2(suntil, TCG_CALL_NO_WG, void, env, i32) -DEF_HELPER_FLAGS_2(rmpa, TCG_CALL_NO_WG, void, env, i32) +DEF_HELPER_2(swhile, void, env, i32) +DEF_HELPER_2(suntil, void, env, i32) +DEF_HELPER_2(rmpa, void, env, i32) DEF_HELPER_1(satr, void, env) -- 2.43.0 v3->v4: Windows headers define an INT type which clashed with an enum value name in arm_gicv3_its.c... The following changes since commit eae587e8e3694b1aceab23239493fb4c7e1a80f5: Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2021-09-13' into staging (2021-09-13 11:00:30 +0100) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20210913-3 for you to fetch changes up to 28e987a7e7edaa3ca7feeac65edca26145df8814: hw/arm/mps2.c: Mark internal-only I2C buses as 'full' (2021-09-13 21:01:08 +0100) ---------------------------------------------------------------- target-arm queue: * mark MPS2/MPS3 board-internal i2c buses as 'full' so that command line user-created devices are not plugged into them * Take an exception if PSTATE.IL is set * Support an emulated ITS in the virt board * Add support for kudo-bmc board * Probe for KVM_CAP_ARM_VM_IPA_SIZE when creating scratch VM * cadence_uart: Fix clock handling issues that prevented u-boot from running ---------------------------------------------------------------- Bin Meng (6): hw/misc: zynq_slcr: Correctly compute output clocks in the reset exit phase hw/char: cadence_uart: Disable transmit when input clock is disabled hw/char: cadence_uart: Move clock/reset check to uart_can_receive() hw/char: cadence_uart: Convert to memop_with_attrs() ops hw/char: cadence_uart: Ignore access when unclocked or in reset for uart_{read, write}() hw/char: cadence_uart: Log a guest error when device is unclocked or in reset Chris Rauer (1): hw/arm: Add support for kudo-bmc board. Marc Zyngier (1): hw/arm/virt: KVM: Probe for KVM_CAP_ARM_VM_IPA_SIZE when creating scratch VM Peter Maydell (5): target/arm: Take an exception if PSTATE.IL is set qdev: Support marking individual buses as 'full' hw/arm/mps2-tz.c: Add extra data parameter to MakeDevFn hw/arm/mps2-tz.c: Mark internal-only I2C buses as 'full' hw/arm/mps2.c: Mark internal-only I2C buses as 'full' Richard Henderson (1): target/arm: Merge disas_a64_insn into aarch64_tr_translate_insn Shashi Mallela (9): hw/intc: GICv3 ITS initial framework hw/intc: GICv3 ITS register definitions added hw/intc: GICv3 ITS command queue framework hw/intc: GICv3 ITS Command processing hw/intc: GICv3 ITS Feature enablement hw/intc: GICv3 redistributor ITS processing tests/data/acpi/virt: Add IORT files for ITS hw/arm/virt: add ITS support in virt GIC tests/data/acpi/virt: Update IORT files for ITS docs/system/arm/nuvoton.rst | 1 + hw/intc/gicv3_internal.h | 188 ++++- include/hw/arm/virt.h | 2 + include/hw/intc/arm_gicv3_common.h | 13 + include/hw/intc/arm_gicv3_its_common.h | 32 +- include/hw/qdev-core.h | 24 + target/arm/cpu.h | 1 + target/arm/kvm_arm.h | 4 +- target/arm/syndrome.h | 5 + target/arm/translate.h | 2 + hw/arm/mps2-tz.c | 92 ++- hw/arm/mps2.c | 12 +- hw/arm/npcm7xx_boards.c | 34 + hw/arm/virt.c | 29 +- hw/char/cadence_uart.c | 61 +- hw/intc/arm_gicv3.c | 14 + hw/intc/arm_gicv3_common.c | 13 + hw/intc/arm_gicv3_cpuif.c | 7 +- hw/intc/arm_gicv3_dist.c | 5 +- hw/intc/arm_gicv3_its.c | 1322 ++++++++++++++++++++++++++++++++ hw/intc/arm_gicv3_its_common.c | 7 +- hw/intc/arm_gicv3_its_kvm.c | 2 +- hw/intc/arm_gicv3_redist.c | 153 +++- hw/misc/zynq_slcr.c | 31 +- softmmu/qdev-monitor.c | 7 +- target/arm/helper-a64.c | 1 + target/arm/helper.c | 8 + target/arm/kvm.c | 7 +- target/arm/translate-a64.c | 255 +++--- target/arm/translate.c | 21 + hw/intc/meson.build | 1 + tests/data/acpi/virt/IORT | Bin 0 -> 124 bytes tests/data/acpi/virt/IORT.memhp | Bin 0 -> 124 bytes tests/data/acpi/virt/IORT.numamem | Bin 0 -> 124 bytes tests/data/acpi/virt/IORT.pxb | Bin 0 -> 124 bytes 35 files changed, 2144 insertions(+), 210 deletions(-) create mode 100644 hw/intc/arm_gicv3_its.c create mode 100644 tests/data/acpi/virt/IORT create mode 100644 tests/data/acpi/virt/IORT.memhp create mode 100644 tests/data/acpi/virt/IORT.numamem create mode 100644 tests/data/acpi/virt/IORT.pxb