The following changes since commit 661c2e1ab29cd9c4d268ae3f44712e8d421c0e56: scripts/checkpatch: Fix a typo (2025-03-04 09:30:26 +0800) are available in the Git repository at: https://github.com/alistair23/qemu.git tags/pull-riscv-to-apply-20250305-1 for you to fetch changes up to 4db19d5b21e058e6eb3474b6be470d1184afaa9e: target/riscv/kvm: add missing KVM CSRs (2025-03-04 15:42:54 +1000) ---------------------------------------------------------------- Third RISC-V PR for 10.0 * CSR coverity fixes * Fix unexpected behavior of vector reduction instructions when vl is 0 * Fix incorrect vlen comparison in prop_vlen_set * Throw debug exception before page fault * Remove redundant "hart_idx" masking from APLIC * Add support for Control Transfer Records Ext * Remove redundant struct members from the IOMMU * Remove duplicate definitions from the IOMMU * Fix tick_offset migration for Goldfish RTC * Add serial alias in virt machine DTB * Remove Bin Meng from RISC-V maintainers * Add support for Control Transfer Records Ext * Log guest errors when reserved bits are set in PTEs * Add missing Sdtrig disas CSRs * Correct the hpmevent sscofpmf mask * Mask upper sscofpmf bits during validation * Remove warnings about Smdbltrp/Smrnmi being disabled * Respect mseccfg.RLB bit for TOR mode PMP entry * Update KVM support to Linux 6.14-rc3 * IOMMU HPM support * Support Sscofpmf/Svade/Svadu/Smnpm/Ssnpm extensions in KVM * Add --ignore-family option to binfmt * Refinement for AIA with KVM acceleration * Reset time changes for KVM ---------------------------------------------------------------- Alistair Francis (1): MAINTAINERS: Remove Bin Meng from RISC-V maintainers Andrea Bolognani (3): binfmt: Shuffle things around binfmt: Normalize host CPU architecture binfmt: Add --ignore-family option Atish Patra (2): target/riscv: Fix the hpmevent mask target/riscv: Mask out upper sscofpmf bits during validation Clément Léger (1): target/riscv: remove warnings about Smdbltrp/Smrnmi being disabled Daniel Henrique Barboza (22): target/riscv/csr.c: fix deadcode in rmw_xireg() target/riscv/csr.c: fix 'ret' deadcode in rmw_xireg() target/riscv/csr.c: fix deadcode in rmw_xiregi() target/riscv/csr.c: fix deadcode in aia_smode32() target/riscv/cpu_helper.c: fix bad_shift in riscv_cpu_interrupt() target/riscv/debug.c: use wp size = 4 for 32-bit CPUs target/riscv: throw debug exception before page fault target/riscv: add ssu64xl target/riscv: use RVB in RVA22U64 target/riscv: add profile u_parent and s_parent target/riscv: change priv_ver check in validate_profile() target/riscv: add RVA23U64 profile target/riscv: add RVA23S64 profile linux-headers: Update to Linux v6.14-rc3 target/riscv/cpu.c: create flag for ziccrse target/riscv/kvm: add extensions after 6.14-rc3 update hw/riscv/riscv-iommu.h: add missing headers hw/riscv: add IOMMU HPM trace events docs/specs/riscv-iommu.rst: add HPM support info target/riscv/cpu: remove unneeded !kvm_enabled() check target/riscv/kvm: add kvm_riscv_reset_regs_csr() target/riscv/kvm: add missing KVM CSRs Huang Borong (1): hw/intc/riscv_aplic: Remove redundant "hart_idx" masking Jason Chien (2): hw/riscv/riscv-iommu: Remove redundant struct members hw/riscv/riscv-iommu-bits: Remove duplicate definitions Max Chou (2): target/riscv: rvv: Fix unexpected behavior of vector reduction instructions when vl is 0 target/riscv: rvv: Fix incorrect vlen comparison in prop_vlen_set Quan Zhou (1): target/riscv/kvm: Add some exts support Rajnesh Kanwal (7): target/riscv: Remove obsolete sfence.vm instruction target/riscv: Add Control Transfer Records CSR definitions. target/riscv: Add support for Control Transfer Records extension CSRs. target/riscv: Add support to record CTR entries. target/riscv: Add CTR sctrclr instruction. target/riscv: machine: Add Control Transfer Record state description target/riscv: Add support to access ctrsource, ctrtarget, ctrdata regs. Rob Bradford (3): disas/riscv: Fix minor whitespace issues disas/riscv: Add missing Sdtrig CSRs target/riscv: Respect mseccfg.RLB bit for TOR mode PMP entry Rodrigo Dias Correa (1): goldfish_rtc: Fix tick_offset migration Tomasz Jeznach (8): hw/riscv/riscv-iommu-bits.h: HPM bits hw/riscv/riscv-iommu: add riscv-iommu-hpm file hw/riscv/riscv-iommu: add riscv_iommu_hpm_incr_ctr() hw/riscv/riscv-iommu: instantiate hpm_timer hw/riscv/riscv-iommu: add IOCOUNTINH mmio writes hw/riscv/riscv-iommu: add IOHPMCYCLES mmio write hw/riscv/riscv-iommu: add hpm events mmio write hw/riscv/riscv-iommu.c: add RISCV_IOMMU_CAP_HPM cap Vasilis Liaskovitis (1): hw/riscv/virt: Add serial alias in DTB Yong-Xuan Wang (3): hw/intc/imsic: refine the IMSIC realize hw/intc/aplic: refine the APLIC realize hw/intc/aplic: refine kvm_msicfgaddr julia (1): target/riscv: log guest errors when reserved bits are set in PTEs MAINTAINERS | 5 +- docs/specs/riscv-iommu.rst | 2 + hw/riscv/riscv-iommu-bits.h | 69 +++- hw/riscv/riscv-iommu-hpm.h | 33 ++ hw/riscv/riscv-iommu.h | 32 +- include/standard-headers/linux/ethtool.h | 4 + include/standard-headers/linux/fuse.h | 76 +++- include/standard-headers/linux/input-event-codes.h | 1 + include/standard-headers/linux/pci_regs.h | 16 +- include/standard-headers/linux/virtio_pci.h | 14 + linux-headers/asm-arm64/kvm.h | 3 - linux-headers/asm-loongarch/kvm_para.h | 1 + linux-headers/asm-riscv/kvm.h | 7 +- linux-headers/asm-x86/kvm.h | 1 + linux-headers/linux/iommufd.h | 35 +- linux-headers/linux/kvm.h | 8 +- linux-headers/linux/stddef.h | 13 +- linux-headers/linux/vduse.h | 2 +- target/riscv/cpu-qom.h | 2 + target/riscv/cpu.h | 16 +- target/riscv/cpu_bits.h | 150 +++++++- target/riscv/cpu_cfg.h | 5 + target/riscv/helper.h | 2 + target/riscv/insn32.decode | 2 +- disas/riscv.c | 16 +- hw/intc/riscv_aplic.c | 74 ++-- hw/intc/riscv_imsic.c | 47 +-- hw/riscv/riscv-iommu-hpm.c | 381 +++++++++++++++++++++ hw/riscv/riscv-iommu.c | 131 ++++++- hw/riscv/virt.c | 3 + hw/rtc/goldfish_rtc.c | 43 +-- target/riscv/cpu.c | 115 ++++++- target/riscv/cpu_helper.c | 315 ++++++++++++++++- target/riscv/csr.c | 318 +++++++++++++++-- target/riscv/debug.c | 6 +- target/riscv/kvm/kvm-cpu.c | 40 ++- target/riscv/machine.c | 25 ++ target/riscv/op_helper.c | 48 +++ target/riscv/pmp.c | 2 +- target/riscv/pmu.c | 2 +- target/riscv/tcg/tcg-cpu.c | 58 +++- target/riscv/translate.c | 46 +++ target/riscv/vector_helper.c | 8 +- target/riscv/insn_trans/trans_privileged.c.inc | 18 +- target/riscv/insn_trans/trans_rvi.c.inc | 75 ++++ target/riscv/insn_trans/trans_rvzce.c.inc | 21 ++ hw/riscv/meson.build | 3 +- hw/riscv/trace-events | 5 + scripts/qemu-binfmt-conf.sh | 78 +++-- tests/data/acpi/riscv64/virt/RHCT | Bin 390 -> 400 bytes 50 files changed, 2106 insertions(+), 271 deletions(-) create mode 100644 hw/riscv/riscv-iommu-hpm.h create mode 100644 hw/riscv/riscv-iommu-hpm.c From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Coverity found a DEADCODE issue in rmw_xireg() claiming that we can't reach 'RISCV_EXCP_VIRT_INSTRUCTION_FAULT' at the 'done' label: done: if (ret) { return (env->virt_enabled && virt) ? RISCV_EXCP_VIRT_INSTRUCTION_FAULT : RISCV_EXCP_ILLEGAL_INST; } return RISCV_EXCP_NONE; This happens because the 'virt' flag, which is only used by 'done', is set to 'false' and it will always remain 'false' in any condition where we'll jump to 'done': switch (csrno) { (...) case CSR_VSIREG: isel = env->vsiselect; virt = true; break; default: goto done; }; 'virt = true' will never reach 'done' because we have a if/else-if/else block right before the label that will always return: if (xiselect_aia_range(isel)) { return ... } else if (...) { return ... } else { return RISCV_EXCP_ILLEGAL_INST; } All this means that we can preserve the current logic by reducing the 'done' label to: done: if (ret) { return RISCV_EXCP_ILLEGAL_INST; } return RISCV_EXCP_NONE; The flag 'virt' is now unused. Remove it. Fix the 'goto done' identation while we're at it. Resolves: Coverity CID 1590359 Fixes: dc0280723d ("target/riscv: Decouple AIA processing from xiselect and xireg") Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250121184847.2109128-2-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException rmw_xireg(CPURISCVState *env, int csrno, target_ulong *val, target_ulong new_val, target_ulong wr_mask) { - bool virt = false; int ret = -EINVAL; target_ulong isel; @@ -XXX,XX +XXX,XX @@ static RISCVException rmw_xireg(CPURISCVState *env, int csrno, break; case CSR_VSIREG: isel = env->vsiselect; - virt = true; break; default: - goto done; + goto done; }; /* @@ -XXX,XX +XXX,XX @@ static RISCVException rmw_xireg(CPURISCVState *env, int csrno, done: if (ret) { - return (env->virt_enabled && virt) ? - RISCV_EXCP_VIRT_INSTRUCTION_FAULT : RISCV_EXCP_ILLEGAL_INST; + return RISCV_EXCP_ILLEGAL_INST; } return RISCV_EXCP_NONE; } -- 2.48.1 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Coverity found a second DEADCODE issue in rmw_xireg() claiming that we can't reach 'RISCV_EXCP_NONE' at the 'done' label: > 2706 done: > 2707 if (ret) { > 2708 return (env->virt_enabled && virt) ? > 2709 RISCV_EXCP_VIRT_INSTRUCTION_FAULT : RISCV_EXCP_ILLEGAL_INST; > 2710 } >>>> CID 1590356: Control flow issues (DEADCODE) >>>> Execution cannot reach this statement: "return RISCV_EXCP_NONE;". > 2711 return RISCV_EXCP_NONE; Our label is now reduced after fixing another deadcode in the previous patch but the problem reported here still remains: done: if (ret) { return RISCV_EXCP_ILLEGAL_INST; } return RISCV_EXCP_NONE; This happens because 'ret' changes only once at the start of the function: ret = smstateen_acc_ok(env, 0, SMSTATEEN0_SVSLCT); if (ret != RISCV_EXCP_NONE) { return ret; } So it's a guarantee that ret will be RISCV_EXCP_NONE (-1) if we ever reach the label, i.e. "if (ret)" will always be true, and the label can be even further reduced to: done: return RISCV_EXCP_ILLEGAL_INST; To make a better use of the label, remove the 'else' from the xiselect_aia_range() chain and let it fall-through to the 'done' label since they are now both returning RISCV_EXCP_ILLEGAL_INST. Resolves: Coverity CID 1590356 Fixes: dc0280723d ("target/riscv: Decouple AIA processing from xiselect and xireg") Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250121184847.2109128-3-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException rmw_xireg(CPURISCVState *env, int csrno, } else if (riscv_cpu_cfg(env)->ext_smcsrind || riscv_cpu_cfg(env)->ext_sscsrind) { return rmw_xireg_csrind(env, csrno, isel, val, new_val, wr_mask); - } else { - return RISCV_EXCP_ILLEGAL_INST; } done: - if (ret) { - return RISCV_EXCP_ILLEGAL_INST; - } - return RISCV_EXCP_NONE; + return RISCV_EXCP_ILLEGAL_INST; } static RISCVException rmw_xtopei(CPURISCVState *env, int csrno, -- 2.48.1 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Coverity found a DEADCODE issue in rmw_xiregi() claiming that we can't reach 'RISCV_EXCP_VIRT_INSTRUCTION_FAULT' at the 'done' label: > 2652 done: >>>> CID 1590357: Control flow issues (DEADCODE) >>>> Execution cannot reach the expression "RISCV_EXCP_VIRT_INSTRUCTION_FAULT" inside this statement: "return (env->virt_enabled &...". > 2653 return (env->virt_enabled && virt) ? > 2654 RISCV_EXCP_VIRT_INSTRUCTION_FAULT : RISCV_EXCP_ILLEGAL_INST; This happens because 'virt' is being set to 'false' and it will remain as 'false' in any code path where 'done' will be called. The label can be safely reduced to: done: return RISCV_EXCP_ILLEGAL_INST; And that will leave us with the following usage of a 'goto' skipping a single 'return' to do another single 'return': } else { goto done; } return rmw_xireg_csrind(env, csrno, isel, val, new_val, wr_mask); done: return RISCV_EXCP_ILLEGAL_INST; Which we will eliminate it and just do 'return RISCV_EXCP_ILLEGAL_INST' instead. Resolves: Coverity CID 1590357 Fixes: 5e33a20827 ("target/riscv: Support generic CSR indirect access") Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250121184847.2109128-4-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static int rmw_xireg_csrind(CPURISCVState *env, int csrno, static int rmw_xiregi(CPURISCVState *env, int csrno, target_ulong *val, target_ulong new_val, target_ulong wr_mask) { - bool virt = false; int ret = -EINVAL; target_ulong isel; @@ -XXX,XX +XXX,XX @@ static int rmw_xiregi(CPURISCVState *env, int csrno, target_ulong *val, } else if (CSR_VSIREG <= csrno && csrno <= CSR_VSIREG6 && csrno != CSR_VSIREG4 - 1) { isel = env->vsiselect; - virt = true; } else { - goto done; + return RISCV_EXCP_ILLEGAL_INST; } return rmw_xireg_csrind(env, csrno, isel, val, new_val, wr_mask); - -done: - return (env->virt_enabled && virt) ? - RISCV_EXCP_VIRT_INSTRUCTION_FAULT : RISCV_EXCP_ILLEGAL_INST; } static RISCVException rmw_xireg(CPURISCVState *env, int csrno, -- 2.48.1 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Coverity reported a DEADCODE ticket in this function, as follows: >>>> CID 1590358: Control flow issues (DEADCODE) >>>> Execution cannot reach this statement: "return ret;". > 380 return ret; > 381 } The cause is that the 'if (ret != RISCV_EXCP_NONE)' conditional is duplicated: ret = smstateen_acc_ok(env, 0, SMSTATEEN0_AIA); if (ret != RISCV_EXCP_NONE) { return ret; } if (ret != RISCV_EXCP_NONE) { return ret; } Remove the duplication to fix the deadcode. Resolves: Coverity CID 1590358 Fixes: dbcb6e1ccf ("target/riscv: Enable S*stateen bits for AIA") Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250121184847.2109128-5-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException aia_smode32(CPURISCVState *env, int csrno) return ret; } - if (ret != RISCV_EXCP_NONE) { - return ret; - } - return smode32(env, csrno); } -- 2.48.1 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Coverity reported a BAD_SHIFT issue in the following code: > 2097 >>>> CID 1590355: Integer handling issues (BAD_SHIFT) >>>> In expression "hdeleg >> cause", right shifting by more than 63 bits has undefined behavior. The shift amount, "cause", is at least 64. > 2098 vsmode_exc = env->virt_enabled && (((hdeleg >> cause) & 1) || vs_injected); > 2099 /* It is not clear to me how the tool guarantees that '"cause" is at least 64', but indeed there's no guarantees that it would be < 64 in the 'async = true' code path. A simple fix to avoid a potential UB is to add a 'cause < 64' guard like 'mode' is already doing right before 'vsmode_exc'. Resolves: Coverity CID 1590355 Fixes: 967760f62c ("target/riscv: Implement Ssdbltrp exception handling") Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250121184847.2109128-6-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu_helper.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/target/riscv/cpu_helper.c b/target/riscv/cpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_helper.c +++ b/target/riscv/cpu_helper.c @@ -XXX,XX +XXX,XX @@ void riscv_cpu_do_interrupt(CPUState *cs) mode = env->priv <= PRV_S && cause < 64 && (((deleg >> cause) & 1) || s_injected || vs_injected) ? PRV_S : PRV_M; - vsmode_exc = env->virt_enabled && (((hdeleg >> cause) & 1) || vs_injected); + vsmode_exc = env->virt_enabled && cause < 64 && + (((hdeleg >> cause) & 1) || vs_injected); + /* * Check double trap condition only if already in S-mode and targeting * S-mode -- 2.48.1 From: Max Chou <max.chou@sifive.com> According to the Vector Reduction Operations section in the RISC-V "V" Vector Extension spec, "If vl=0, no operation is performed and the destination register is not updated." The vd should be updated when vl is larger than 0. Fixes: fe5c9ab1fc ("target/riscv: vector single-width integer reduction instructions") Fixes: f714361ed7 ("target/riscv: rvv-1.0: implement vstart CSR") Signed-off-by: Max Chou <max.chou@sifive.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20250124101452.2519171-1-max.chou@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/vector_helper.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/target/riscv/vector_helper.c b/target/riscv/vector_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/vector_helper.c +++ b/target/riscv/vector_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(NAME)(void *vd, void *v0, void *vs1, \ } \ s1 = OP(s1, (TD)s2); \ } \ - *((TD *)vd + HD(0)) = s1; \ + if (vl > 0) { \ + *((TD *)vd + HD(0)) = s1; \ + } \ env->vstart = 0; \ /* set tail elements to 1s */ \ vext_set_elems_1s(vd, vta, esz, vlenb); \ @@ -XXX,XX +XXX,XX @@ void HELPER(NAME)(void *vd, void *v0, void *vs1, \ } \ s1 = OP(s1, (TD)s2, &env->fp_status); \ } \ - *((TD *)vd + HD(0)) = s1; \ + if (vl > 0) { \ + *((TD *)vd + HD(0)) = s1; \ + } \ env->vstart = 0; \ /* set tail elements to 1s */ \ vext_set_elems_1s(vd, vta, esz, vlenb); \ -- 2.48.1 From: Max Chou <max.chou@sifive.com> In prop_vlen_set function, there is an incorrect comparison between vlen(bit) and vlenb(byte). This will cause unexpected error when user applies the `vlen=1024` cpu option with a vendor predefined cpu type that the default vlen is 1024(vlenb=128). Fixes: 4f6d036ccc ("target/riscv/cpu.c: remove cpu->cfg.vlen") Signed-off-by: Max Chou <max.chou@sifive.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20250124090539.2506448-1-max.chou@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static void prop_vlen_set(Object *obj, Visitor *v, const char *name, void *opaque, Error **errp) { RISCVCPU *cpu = RISCV_CPU(obj); + uint16_t cpu_vlen = cpu->cfg.vlenb << 3; uint16_t value; if (!visit_type_uint16(v, name, &value, errp)) { @@ -XXX,XX +XXX,XX @@ static void prop_vlen_set(Object *obj, Visitor *v, const char *name, return; } - if (value != cpu->cfg.vlenb && riscv_cpu_is_vendor(obj)) { + if (value != cpu_vlen && riscv_cpu_is_vendor(obj)) { cpu_set_prop_err(cpu, name, errp); error_append_hint(errp, "Current '%s' val: %u\n", - name, cpu->cfg.vlenb << 3); + name, cpu_vlen); return; } -- 2.48.1 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> The mcontrol select bit (19) is always zero, meaning our triggers will always match virtual addresses. In this condition, if the user does not specify a size for the trigger, the access size defaults to XLEN. At this moment we're using def_size = 8 regardless of CPU XLEN. Use def_size = 4 in case we're running 32 bits. Fixes: 95799e36c1 ("target/riscv: Add initial support for the Sdtrig extension") Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20250121170626.1992570-2-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/debug.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/target/riscv/debug.c b/target/riscv/debug.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/debug.c +++ b/target/riscv/debug.c @@ -XXX,XX +XXX,XX @@ static void type2_breakpoint_insert(CPURISCVState *env, target_ulong index) bool enabled = type2_breakpoint_enabled(ctrl); CPUState *cs = env_cpu(env); int flags = BP_CPU | BP_STOP_BEFORE_ACCESS; - uint32_t size; + uint32_t size, def_size; if (!enabled) { return; @@ -XXX,XX +XXX,XX @@ static void type2_breakpoint_insert(CPURISCVState *env, target_ulong index) cpu_watchpoint_insert(cs, addr, size, flags, &env->cpu_watchpoint[index]); } else { - cpu_watchpoint_insert(cs, addr, 8, flags, + def_size = riscv_cpu_mxl(env) == MXL_RV64 ? 8 : 4; + + cpu_watchpoint_insert(cs, addr, def_size, flags, &env->cpu_watchpoint[index]); } } -- 2.48.1 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> In the RISC-V privileged ISA section 3.1.15 table 15, it is determined that a debug exception that is triggered from a load/store has a higher priority than a possible fault that this access might trigger. This is not the case ATM as shown in [1]. Adding a breakpoint in an address that deliberately will fault is causing a load page fault instead of a debug exception. The reason is that we're throwing in the page fault as soon as the fault occurs (end of riscv_cpu_tlb_fill(), raise_mmu_exception()), not allowing the installed watchpoints to trigger. Call cpu_check_watchpoint() in the page fault path to search and execute any watchpoints that might exist for the address, never returning back to the fault path. If no watchpoints are found cpu_check_watchpoint() will return and we'll fall-through the regular path to raise_mmu_exception(). [1] https://gitlab.com/qemu-project/qemu/-/issues/2627 Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2627 Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20250121170626.1992570-3-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu_helper.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/target/riscv/cpu_helper.c b/target/riscv/cpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_helper.c +++ b/target/riscv/cpu_helper.c @@ -XXX,XX +XXX,XX @@ #include "exec/page-protection.h" #include "instmap.h" #include "tcg/tcg-op.h" +#include "hw/core/tcg-cpu-ops.h" #include "trace.h" #include "semihosting/common-semi.h" #include "system/cpu-timers.h" @@ -XXX,XX +XXX,XX @@ bool riscv_cpu_tlb_fill(CPUState *cs, vaddr address, int size, } else if (probe) { return false; } else { + int wp_access = 0; + + if (access_type == MMU_DATA_LOAD) { + wp_access |= BP_MEM_READ; + } else if (access_type == MMU_DATA_STORE) { + wp_access |= BP_MEM_WRITE; + } + + /* + * If a watchpoint isn't found for 'addr' this will + * be a no-op and we'll resume the mmu_exception path. + * Otherwise we'll throw a debug exception and execution + * will continue elsewhere. + */ + cpu_check_watchpoint(cs, address, size, MEMTXATTRS_UNSPECIFIED, + wp_access, retaddr); + raise_mmu_exception(env, address, access_type, pmp_violation, first_stage_error, two_stage_lookup, two_stage_indirect_error); -- 2.48.1 From: Huang Borong <huangborong@bosc.ac.cn> Remove the redundant masking of "hart_idx", as the same operation is performed later during address calculation. This change impacts the "hart_idx" value in the final qemu_log_mask() call. The original "hart_idx" parameter should be used for logging to ensure accuracy, rather than the masked value. Signed-off-by: Huang Borong <huangborong@bosc.ac.cn> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Message-ID: <20250115035105.19600-1-huangborong@bosc.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/intc/riscv_aplic.c | 1 - 1 file changed, 1 deletion(-) diff --git a/hw/intc/riscv_aplic.c b/hw/intc/riscv_aplic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/riscv_aplic.c +++ b/hw/intc/riscv_aplic.c @@ -XXX,XX +XXX,XX @@ static void riscv_aplic_msi_send(RISCVAPLICState *aplic, APLIC_xMSICFGADDRH_HHXW_MASK; group_idx = hart_idx >> lhxw; - hart_idx &= APLIC_xMSICFGADDR_PPN_LHX_MASK(lhxw); addr = msicfgaddr; addr |= ((uint64_t)(msicfgaddrH & APLIC_xMSICFGADDRH_BAPPN_MASK)) << 32; -- 2.48.1 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> ssu64xl is defined in RVA22 as: "sstatus.UXL must be capable of holding the value 2 (i.e., UXLEN=64 must be supported)." This is always true in TCG and it's mandatory for RVA23, so claim support for it. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250115184316.2344583-2-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 1 + tests/data/acpi/riscv64/virt/RHCT | Bin 390 -> 398 bytes 2 files changed, 1 insertion(+) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(sstc, PRIV_VERSION_1_12_0, ext_sstc), ISA_EXT_DATA_ENTRY(sstvala, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(sstvecd, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_EXT_DATA_ENTRY(ssu64xl, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(supm, PRIV_VERSION_1_13_0, ext_supm), ISA_EXT_DATA_ENTRY(svade, PRIV_VERSION_1_11_0, ext_svade), ISA_EXT_DATA_ENTRY(svadu, PRIV_VERSION_1_12_0, ext_svadu), diff --git a/tests/data/acpi/riscv64/virt/RHCT b/tests/data/acpi/riscv64/virt/RHCT index XXXXXXX..XXXXXXX 100644 Binary files a/tests/data/acpi/riscv64/virt/RHCT and b/tests/data/acpi/riscv64/virt/RHCT differ -- 2.48.1 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> From the time we added RVA22U64 until now the spec didn't declare 'RVB' as a dependency, using zba/zbb/zbs instead. Since then the RVA22 spec [1] added the following in the 'RVA22U64 Mandatory Extensions' section: "B Bit-manipulation instructions Note: The B extension comprises the Zba, Zbb, and Zbs extensions. At the time of RVA22U64's ratification, the B extension had not yet been defined, and so RVA22U64 explicitly mandated Zba, Zbb, and Zbs instead. Mandating B is equivalent." It is also equivalent to QEMU (see riscv_cpu_validate_b() in target/riscv/tcg/tcg-cpu.c). Finally, RVA23U64 [2] directly mentions RVB as a mandatory extension, not citing zba/zbb/zbs. To make it clear that RVA23U64 will extend RVA22U64 (i.e. RVA22 is a parent of RVA23), use RVB in RVA22U64 as well. (bios-tables-test change: RVB added to riscv,isa) [1] https://github.com/riscv/riscv-profiles/blob/main/src/profiles.adoc#61-rva22u64-profile [2] https://github.com/riscv/riscv-profiles/blob/main/src/rva23-profile.adoc#rva23u64-profile Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250115184316.2344583-3-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 2 +- tests/data/acpi/riscv64/virt/RHCT | Bin 398 -> 400 bytes 2 files changed, 1 insertion(+), 1 deletion(-) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static const PropertyInfo prop_marchid = { static RISCVCPUProfile RVA22U64 = { .parent = NULL, .name = "rva22u64", - .misa_ext = RVI | RVM | RVA | RVF | RVD | RVC | RVU, + .misa_ext = RVI | RVM | RVA | RVF | RVD | RVC | RVB | RVU, .priv_spec = RISCV_PROFILE_ATTR_UNUSED, .satp_mode = RISCV_PROFILE_ATTR_UNUSED, .ext_offsets = { diff --git a/tests/data/acpi/riscv64/virt/RHCT b/tests/data/acpi/riscv64/virt/RHCT index XXXXXXX..XXXXXXX 100644 Binary files a/tests/data/acpi/riscv64/virt/RHCT and b/tests/data/acpi/riscv64/virt/RHCT differ -- 2.48.1 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> The current 'parent' mechanic for profiles allows for one profile to be a child of a previous/older profile, enabling all its extensions (and the parent profile itself) and sparing us from tediously listing all extensions for every profile. This works fine for u-mode profiles. For s-mode profiles this is not enough: a s-mode profile extends not only his equivalent u-mode profile but also the previous s-mode profile. This means, for example, that RVA23S64 extends both RVA23U64 and RVA22S64. To fit this usage, rename the existing 'parent' to 'u_parent' and add a new 's_parent' attribute for profiles. Handle both like we were doing with the previous 'parent' attribute, i.e. if set, enable it. This change does nothing for the existing profiles but will make RVA23S64 simpler. Suggested-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250115184316.2344583-4-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 3 ++- target/riscv/cpu.c | 6 ++++-- target/riscv/tcg/tcg-cpu.c | 35 ++++++++++++++++++++++++++--------- 3 files changed, 32 insertions(+), 12 deletions(-) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ const char *riscv_get_misa_ext_description(uint32_t bit); #define CPU_CFG_OFFSET(_prop) offsetof(struct RISCVCPUConfig, _prop) typedef struct riscv_cpu_profile { - struct riscv_cpu_profile *parent; + struct riscv_cpu_profile *u_parent; + struct riscv_cpu_profile *s_parent; const char *name; uint32_t misa_ext; bool enabled; diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static const PropertyInfo prop_marchid = { * doesn't need to be manually enabled by the profile. */ static RISCVCPUProfile RVA22U64 = { - .parent = NULL, + .u_parent = NULL, + .s_parent = NULL, .name = "rva22u64", .misa_ext = RVI | RVM | RVA | RVF | RVD | RVC | RVB | RVU, .priv_spec = RISCV_PROFILE_ATTR_UNUSED, @@ -XXX,XX +XXX,XX @@ static RISCVCPUProfile RVA22U64 = { * The remaining features/extensions comes from RVA22U64. */ static RISCVCPUProfile RVA22S64 = { - .parent = &RVA22U64, + .u_parent = &RVA22U64, + .s_parent = NULL, .name = "rva22s64", .misa_ext = RVS, .priv_spec = PRIV_VERSION_1_12_0, diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static bool riscv_cpu_validate_profile_satp(RISCVCPU *cpu, } #endif +static void riscv_cpu_check_parent_profile(RISCVCPU *cpu, + RISCVCPUProfile *profile, + RISCVCPUProfile *parent) +{ + const char *parent_name; + bool parent_enabled; + + if (!profile->enabled || !parent) { + return; + } + + parent_name = parent->name; + parent_enabled = object_property_get_bool(OBJECT(cpu), parent_name, NULL); + profile->enabled = parent_enabled; +} + static void riscv_cpu_validate_profile(RISCVCPU *cpu, RISCVCPUProfile *profile) { CPURISCVState *env = &cpu->env; const char *warn_msg = "Profile %s mandates disabled extension %s"; bool send_warn = profile->user_set && profile->enabled; - bool parent_enabled, profile_impl = true; + bool profile_impl = true; int i; #ifndef CONFIG_USER_ONLY @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_validate_profile(RISCVCPU *cpu, profile->enabled = profile_impl; - if (profile->parent != NULL) { - parent_enabled = object_property_get_bool(OBJECT(cpu), - profile->parent->name, - NULL); - profile->enabled = profile->enabled && parent_enabled; - } + riscv_cpu_check_parent_profile(cpu, profile, profile->u_parent); + riscv_cpu_check_parent_profile(cpu, profile, profile->s_parent); } static void riscv_cpu_validate_profiles(RISCVCPU *cpu) @@ -XXX,XX +XXX,XX @@ static void cpu_set_profile(Object *obj, Visitor *v, const char *name, profile->user_set = true; profile->enabled = value; - if (profile->parent != NULL) { - object_property_set_bool(obj, profile->parent->name, + if (profile->u_parent != NULL) { + object_property_set_bool(obj, profile->u_parent->name, + profile->enabled, NULL); + } + + if (profile->s_parent != NULL) { + object_property_set_bool(obj, profile->s_parent->name, profile->enabled, NULL); } -- 2.48.1 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> The S profiles do a priv_ver check during validation to see if the running priv_ver is compatible with it. This check is done by comparing if the running priv_ver is equal to the priv_ver the profile specifies. There is an universe where we added RVA23S64 support based on both RVA23U64 and RVA22S64 and this error is being thrown: qemu-system-riscv64: warning: Profile rva22s64 requires priv spec v1.12.0, but priv ver v1.13.0 was set We're enabling RVA22S64 (priv_ver 1.12) as a dependency of RVA23S64 (priv_ver 1.13) and complaining to users about what we did ourselves. There's no drawback in allowing a profile to run in an env that has a priv_ver newer than it's required by it. So, like Hiro Nakamura saves the future by changing the past, change the priv_ver check now to allow profiles to run in a newer priv_ver. This universe will have one less warning to deal with. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250115184316.2344583-5-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_validate_profile(RISCVCPU *cpu, #endif if (profile->priv_spec != RISCV_PROFILE_ATTR_UNUSED && - profile->priv_spec != env->priv_ver) { + profile->priv_spec > env->priv_ver) { profile_impl = false; if (send_warn) { -- 2.48.1 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Add RVA23U64 as described in [1]. Add it as a child of RVA22U64 since all RVA22U64 mandatory extensions are also present in RVA23U64. What's left then is to list the mandatory extensions that are RVA23 only. A new "rva23u64" CPU is also added. [1] https://github.com/riscv/riscv-profiles/blob/main/src/rva23-profile.adoc Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250115184316.2344583-6-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu-qom.h | 1 + target/riscv/cpu.c | 33 +++++++++++++++++++++++++++++++++ 2 files changed, 34 insertions(+) diff --git a/target/riscv/cpu-qom.h b/target/riscv/cpu-qom.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu-qom.h +++ b/target/riscv/cpu-qom.h @@ -XXX,XX +XXX,XX @@ #define TYPE_RISCV_CPU_RV64E RISCV_CPU_TYPE_NAME("rv64e") #define TYPE_RISCV_CPU_RVA22U64 RISCV_CPU_TYPE_NAME("rva22u64") #define TYPE_RISCV_CPU_RVA22S64 RISCV_CPU_TYPE_NAME("rva22s64") +#define TYPE_RISCV_CPU_RVA23U64 RISCV_CPU_TYPE_NAME("rva23u64") #define TYPE_RISCV_CPU_IBEX RISCV_CPU_TYPE_NAME("lowrisc-ibex") #define TYPE_RISCV_CPU_SHAKTI_C RISCV_CPU_TYPE_NAME("shakti-c") #define TYPE_RISCV_CPU_SIFIVE_E31 RISCV_CPU_TYPE_NAME("sifive-e31") diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static RISCVCPUProfile RVA22S64 = { } }; +/* + * All mandatory extensions from RVA22U64 are present + * in RVA23U64 so set RVA22 as a parent. We need to + * declare just the newly added mandatory extensions. + */ +static RISCVCPUProfile RVA23U64 = { + .u_parent = &RVA22U64, + .s_parent = NULL, + .name = "rva23u64", + .misa_ext = RVV, + .priv_spec = RISCV_PROFILE_ATTR_UNUSED, + .satp_mode = RISCV_PROFILE_ATTR_UNUSED, + .ext_offsets = { + CPU_CFG_OFFSET(ext_zvfhmin), CPU_CFG_OFFSET(ext_zvbb), + CPU_CFG_OFFSET(ext_zvkt), CPU_CFG_OFFSET(ext_zihintntl), + CPU_CFG_OFFSET(ext_zicond), CPU_CFG_OFFSET(ext_zimop), + CPU_CFG_OFFSET(ext_zcmop), CPU_CFG_OFFSET(ext_zcb), + CPU_CFG_OFFSET(ext_zfa), CPU_CFG_OFFSET(ext_zawrs), + CPU_CFG_OFFSET(ext_supm), + + RISCV_PROFILE_EXT_LIST_END + } +}; + RISCVCPUProfile *riscv_profiles[] = { &RVA22U64, &RVA22S64, + &RVA23U64, NULL, }; @@ -XXX,XX +XXX,XX @@ static void rva22s64_profile_cpu_init(Object *obj) RVA22S64.enabled = true; } + +static void rva23u64_profile_cpu_init(Object *obj) +{ + rv64i_bare_cpu_init(obj); + + RVA23U64.enabled = true; +} #endif static const gchar *riscv_gdb_arch_name(CPUState *cs) @@ -XXX,XX +XXX,XX @@ static const TypeInfo riscv_cpu_type_infos[] = { DEFINE_BARE_CPU(TYPE_RISCV_CPU_RV64E, MXL_RV64, rv64e_bare_cpu_init), DEFINE_PROFILE_CPU(TYPE_RISCV_CPU_RVA22U64, MXL_RV64, rva22u64_profile_cpu_init), DEFINE_PROFILE_CPU(TYPE_RISCV_CPU_RVA22S64, MXL_RV64, rva22s64_profile_cpu_init), + DEFINE_PROFILE_CPU(TYPE_RISCV_CPU_RVA23U64, MXL_RV64, rva23u64_profile_cpu_init), #endif /* TARGET_RISCV64 */ }; -- 2.48.1 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Add RVA23S64 as described in [1]. This profile inherits all mandatory extensions of RVA23U64 and RVA22S64, making it a child of both profiles. A new "rva23s64" profile CPU is also added. This is the generated riscv,isa for it (taken via -M dumpdtb): rv64imafdcbvh_zic64b_zicbom_zicbop_zicboz_ziccamoa_ziccif_zicclsm_ ziccrse_zicond_zicntr_zicsr_zifencei_zihintntl_zihintpause_zihpm_zimop_ zmmul_za64rs_zaamo_zalrsc_zawrs_zfa_zfhmin_zca_zcb_zcd_zcmop_zba_zbb_zbs_ zkt_zvbb_zve32f_zve32x_zve64f_zve64d_zve64x_zvfhmin_zvkb_zvkt_shcounterenw_ sha_shgatpa_shtvala_shvsatpa_shvstvala_shvstvecd_smnpm_smstateen_ssccptr_ sscofpmf_sscounterenw_ssnpm_ssstateen_sstc_sstvala_sstvecd_ssu64xl_ supm_svade_svinval_svnapot_svpbmt [1] https://github.com/riscv/riscv-profiles/blob/main/src/rva23-profile.adoc Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250115184316.2344583-7-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu-qom.h | 1 + target/riscv/cpu.c | 39 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 40 insertions(+) diff --git a/target/riscv/cpu-qom.h b/target/riscv/cpu-qom.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu-qom.h +++ b/target/riscv/cpu-qom.h @@ -XXX,XX +XXX,XX @@ #define TYPE_RISCV_CPU_RVA22U64 RISCV_CPU_TYPE_NAME("rva22u64") #define TYPE_RISCV_CPU_RVA22S64 RISCV_CPU_TYPE_NAME("rva22s64") #define TYPE_RISCV_CPU_RVA23U64 RISCV_CPU_TYPE_NAME("rva23u64") +#define TYPE_RISCV_CPU_RVA23S64 RISCV_CPU_TYPE_NAME("rva23s64") #define TYPE_RISCV_CPU_IBEX RISCV_CPU_TYPE_NAME("lowrisc-ibex") #define TYPE_RISCV_CPU_SHAKTI_C RISCV_CPU_TYPE_NAME("shakti-c") #define TYPE_RISCV_CPU_SIFIVE_E31 RISCV_CPU_TYPE_NAME("sifive-e31") diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static RISCVCPUProfile RVA23U64 = { } }; +/* + * As with RVA23U64, RVA23S64 also defines 'named features'. + * + * Cache related features that we consider enabled since we don't + * implement cache: Ssccptr + * + * Other named features that we already implement: Sstvecd, Sstvala, + * Sscounterenw, Ssu64xl + * + * The remaining features/extensions comes from RVA23S64. + */ +static RISCVCPUProfile RVA23S64 = { + .u_parent = &RVA23U64, + .s_parent = &RVA22S64, + .name = "rva23s64", + .misa_ext = RVS, + .priv_spec = PRIV_VERSION_1_13_0, + .satp_mode = VM_1_10_SV39, + .ext_offsets = { + /* New in RVA23S64 */ + CPU_CFG_OFFSET(ext_svnapot), CPU_CFG_OFFSET(ext_sstc), + CPU_CFG_OFFSET(ext_sscofpmf), CPU_CFG_OFFSET(ext_ssnpm), + + /* Named features: Sha */ + CPU_CFG_OFFSET(ext_sha), + + RISCV_PROFILE_EXT_LIST_END + } +}; + RISCVCPUProfile *riscv_profiles[] = { &RVA22U64, &RVA22S64, &RVA23U64, + &RVA23S64, NULL, }; @@ -XXX,XX +XXX,XX @@ static void rva23u64_profile_cpu_init(Object *obj) RVA23U64.enabled = true; } + +static void rva23s64_profile_cpu_init(Object *obj) +{ + rv64i_bare_cpu_init(obj); + + RVA23S64.enabled = true; +} #endif static const gchar *riscv_gdb_arch_name(CPUState *cs) @@ -XXX,XX +XXX,XX @@ static const TypeInfo riscv_cpu_type_infos[] = { DEFINE_PROFILE_CPU(TYPE_RISCV_CPU_RVA22U64, MXL_RV64, rva22u64_profile_cpu_init), DEFINE_PROFILE_CPU(TYPE_RISCV_CPU_RVA22S64, MXL_RV64, rva22s64_profile_cpu_init), DEFINE_PROFILE_CPU(TYPE_RISCV_CPU_RVA23U64, MXL_RV64, rva23u64_profile_cpu_init), + DEFINE_PROFILE_CPU(TYPE_RISCV_CPU_RVA23S64, MXL_RV64, rva23s64_profile_cpu_init), #endif /* TARGET_RISCV64 */ }; -- 2.48.1 From: Jason Chien <jason.chien@sifive.com> Initially, the IOMMU would create a thread, but this thread was removed in the merged version. The struct members for thread control should have been removed as well, but they were not removed in commit 0c54acb8243 ("hw/riscv: add RISC-V IOMMU base emulation"). Signed-off-by: Jason Chien <jason.chien@sifive.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250115141730.30858-1-jason.chien@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu.h | 5 ----- 1 file changed, 5 deletions(-) diff --git a/hw/riscv/riscv-iommu.h b/hw/riscv/riscv-iommu.h index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.h +++ b/hw/riscv/riscv-iommu.h @@ -XXX,XX +XXX,XX @@ struct RISCVIOMMUState { /* interrupt notifier */ void (*notify)(RISCVIOMMUState *iommu, unsigned vector); - /* IOMMU State Machine */ - QemuThread core_proc; /* Background processing thread */ - QemuCond core_cond; /* Background processing wake up signal */ - unsigned core_exec; /* Processing thread execution actions */ - /* IOMMU target address space */ AddressSpace *target_as; MemoryRegion *target_mr; -- 2.48.1 From: Jason Chien <jason.chien@sifive.com> The header contains duplicate macro definitions. This commit eliminates the duplicate part. Signed-off-by: Jason Chien <jason.chien@sifive.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250115141730.30858-2-jason.chien@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu-bits.h | 22 ++++++---------------- 1 file changed, 6 insertions(+), 16 deletions(-) diff --git a/hw/riscv/riscv-iommu-bits.h b/hw/riscv/riscv-iommu-bits.h index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu-bits.h +++ b/hw/riscv/riscv-iommu-bits.h @@ -XXX,XX +XXX,XX @@ struct riscv_iommu_pq_record { #define RISCV_IOMMU_PREQ_HDR_PRIV BIT_ULL(33) #define RISCV_IOMMU_PREQ_HDR_EXEC BIT_ULL(34) #define RISCV_IOMMU_PREQ_HDR_DID GENMASK_ULL(63, 40) + /* Payload fields */ +#define RISCV_IOMMU_PREQ_PAYLOAD_R BIT_ULL(0) +#define RISCV_IOMMU_PREQ_PAYLOAD_W BIT_ULL(1) +#define RISCV_IOMMU_PREQ_PAYLOAD_L BIT_ULL(2) #define RISCV_IOMMU_PREQ_PAYLOAD_M GENMASK_ULL(2, 0) +#define RISCV_IOMMU_PREQ_PRG_INDEX GENMASK_ULL(11, 3) +#define RISCV_IOMMU_PREQ_UADDR GENMASK_ULL(63, 12) /* Common field positions */ #define RISCV_IOMMU_PPN_FIELD GENMASK_ULL(53, 10) @@ -XXX,XX +XXX,XX @@ enum riscv_iommu_fq_ttypes { RISCV_IOMMU_FW_TTYPE_PCIE_MSG_REQ = 9, }; -/* Header fields */ -#define RISCV_IOMMU_PREQ_HDR_PID GENMASK_ULL(31, 12) -#define RISCV_IOMMU_PREQ_HDR_PV BIT_ULL(32) -#define RISCV_IOMMU_PREQ_HDR_PRIV BIT_ULL(33) -#define RISCV_IOMMU_PREQ_HDR_EXEC BIT_ULL(34) -#define RISCV_IOMMU_PREQ_HDR_DID GENMASK_ULL(63, 40) - -/* Payload fields */ -#define RISCV_IOMMU_PREQ_PAYLOAD_R BIT_ULL(0) -#define RISCV_IOMMU_PREQ_PAYLOAD_W BIT_ULL(1) -#define RISCV_IOMMU_PREQ_PAYLOAD_L BIT_ULL(2) -#define RISCV_IOMMU_PREQ_PAYLOAD_M GENMASK_ULL(2, 0) -#define RISCV_IOMMU_PREQ_PRG_INDEX GENMASK_ULL(11, 3) -#define RISCV_IOMMU_PREQ_UADDR GENMASK_ULL(63, 12) - - /* * struct riscv_iommu_msi_pte - MSI Page Table Entry */ -- 2.48.1 From: Rodrigo Dias Correa <r@drigo.nl> Instead of migrating the raw tick_offset, goldfish_rtc migrates a recalculated value based on QEMU_CLOCK_VIRTUAL. As QEMU_CLOCK_VIRTUAL stands still across a save-and-restore cycle, the guest RTC becomes out of sync with the host RTC when the VM is restored. As described in the bug description, it looks like this calculation was copied from pl031 RTC, which had its tick_offset migration fixed by Commit 032cfe6a79c8 ("pl031: Correctly migrate state when using -rtc clock=host"). Migrate the tick_offset directly, adding it as a version-dependent field to VMState. Keep the old behavior when migrating from previous versions. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2033 Signed-off-by: Rodrigo Dias Correa <r@drigo.nl> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250114212150.228241-1-r@drigo.nl> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/rtc/goldfish_rtc.c | 43 +++++++++++++------------------------------ 1 file changed, 13 insertions(+), 30 deletions(-) diff --git a/hw/rtc/goldfish_rtc.c b/hw/rtc/goldfish_rtc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/rtc/goldfish_rtc.c +++ b/hw/rtc/goldfish_rtc.c @@ -XXX,XX +XXX,XX @@ static void goldfish_rtc_write(void *opaque, hwaddr offset, trace_goldfish_rtc_write(offset, value); } -static int goldfish_rtc_pre_save(void *opaque) -{ - uint64_t delta; - GoldfishRTCState *s = opaque; - - /* - * We want to migrate this offset, which sounds straightforward. - * Unfortunately, we cannot directly pass tick_offset because - * rtc_clock on destination Host might not be same source Host. - * - * To tackle, this we pass tick_offset relative to vm_clock from - * source Host and make it relative to rtc_clock at destination Host. - */ - delta = qemu_clock_get_ns(rtc_clock) - - qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); - s->tick_offset_vmstate = s->tick_offset + delta; - - return 0; -} - static int goldfish_rtc_post_load(void *opaque, int version_id) { - uint64_t delta; GoldfishRTCState *s = opaque; - /* - * We extract tick_offset from tick_offset_vmstate by doing - * reverse math compared to pre_save() function. - */ - delta = qemu_clock_get_ns(rtc_clock) - - qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); - s->tick_offset = s->tick_offset_vmstate - delta; + if (version_id < 3) { + /* + * Previous versions didn't migrate tick_offset directly. Instead, they + * migrated tick_offset_vmstate, which is a recalculation based on + * QEMU_CLOCK_VIRTUAL. We use tick_offset_vmstate when migrating from + * older versions. + */ + uint64_t delta = qemu_clock_get_ns(rtc_clock) - + qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + s->tick_offset = s->tick_offset_vmstate - delta; + } goldfish_rtc_set_alarm(s); @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps goldfish_rtc_ops[2] = { static const VMStateDescription goldfish_rtc_vmstate = { .name = TYPE_GOLDFISH_RTC, - .version_id = 2, - .pre_save = goldfish_rtc_pre_save, + .version_id = 3, .post_load = goldfish_rtc_post_load, .fields = (const VMStateField[]) { VMSTATE_UINT64(tick_offset_vmstate, GoldfishRTCState), @@ -XXX,XX +XXX,XX @@ static const VMStateDescription goldfish_rtc_vmstate = { VMSTATE_UINT32(irq_pending, GoldfishRTCState), VMSTATE_UINT32(irq_enabled, GoldfishRTCState), VMSTATE_UINT32(time_high, GoldfishRTCState), + VMSTATE_UINT64_V(tick_offset, GoldfishRTCState, 3), VMSTATE_END_OF_LIST() } }; -- 2.48.1 From: Vasilis Liaskovitis <vliaskovitis@suse.com> Add an "aliases" node with a "serial0" entry for the single UART in the riscv virt machine. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2774 Signed-off-by: Vasilis Liaskovitis <vliaskovitis@suse.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250116161007.39710-1-vliaskovitis@suse.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_uart(RISCVVirtState *s, const MemMapEntry *memmap, } qemu_fdt_setprop_string(ms->fdt, "/chosen", "stdout-path", name); + qemu_fdt_setprop_string(ms->fdt, "/aliases", "serial0", name); } static void create_fdt_rtc(RISCVVirtState *s, const MemMapEntry *memmap, @@ -XXX,XX +XXX,XX @@ static void create_fdt(RISCVVirtState *s, const MemMapEntry *memmap) qemu_fdt_setprop(ms->fdt, "/chosen", "rng-seed", rng_seed, sizeof(rng_seed)); + qemu_fdt_add_subnode(ms->fdt, "/aliases"); + create_fdt_flash(s, memmap); create_fdt_fw_cfg(s, memmap); create_fdt_pmu(s); -- 2.48.1 From: Alistair Francis <alistair23@gmail.com> Bin Meng has been a long time contributor and maintainer for QEMU RISC-V and has been very beneficial to the RISC-V ecosystem. Unfortunately his email has started to bounce so this patch is removing them from MAINTAINERS. If in the future Bin Meng wants to return we will happily re-add them. Note that I'm not removing Bin Meng as a "SD (Secure Card)" maintainer. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Acked-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20250128060546.1374394-1-alistair.francis@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- MAINTAINERS | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: tests/functional/test_ppc_74xx.py RISC-V TCG CPUs M: Palmer Dabbelt <palmer@dabbelt.com> M: Alistair Francis <alistair.francis@wdc.com> -M: Bin Meng <bmeng.cn@gmail.com> R: Weiwei Li <liwei1518@gmail.com> R: Daniel Henrique Barboza <dbarboza@ventanamicro.com> R: Liu Zhiwei <zhiwei_liu@linux.alibaba.com> @@ -XXX,XX +XXX,XX @@ F: include/hw/riscv/opentitan.h F: include/hw/*/ibex_*.h Microchip PolarFire SoC Icicle Kit -M: Bin Meng <bmeng.cn@gmail.com> L: qemu-riscv@nongnu.org S: Supported F: docs/system/riscv/microchip-icicle-kit.rst @@ -XXX,XX +XXX,XX @@ F: include/hw/char/shakti_uart.h SiFive Machines M: Alistair Francis <Alistair.Francis@wdc.com> -M: Bin Meng <bmeng.cn@gmail.com> M: Palmer Dabbelt <palmer@dabbelt.com> L: qemu-riscv@nongnu.org S: Supported @@ -XXX,XX +XXX,XX @@ S: Orphan F: hw/i386/amd_iommu.? OpenSBI Firmware -M: Bin Meng <bmeng.cn@gmail.com> +L: qemu-riscv@nongnu.org S: Supported F: pc-bios/opensbi-* F: .gitlab-ci.d/opensbi.yml -- 2.48.1 From: Rajnesh Kanwal <rkanwal@rivosinc.com> Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Jason Chien <jason.chien@sifive.com> Message-ID: <20250205-b4-ctr_upstream_v6-v6-1-439d8e06c8ef@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/insn32.decode | 1 - target/riscv/insn_trans/trans_privileged.c.inc | 5 ----- 2 files changed, 6 deletions(-) diff --git a/target/riscv/insn32.decode b/target/riscv/insn32.decode index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn32.decode +++ b/target/riscv/insn32.decode @@ -XXX,XX +XXX,XX @@ sret 0001000 00010 00000 000 00000 1110011 mret 0011000 00010 00000 000 00000 1110011 wfi 0001000 00101 00000 000 00000 1110011 sfence_vma 0001001 ..... ..... 000 00000 1110011 @sfence_vma -sfence_vm 0001000 00100 ..... 000 00000 1110011 @sfence_vm # *** NMI *** mnret 0111000 00010 00000 000 00000 1110011 diff --git a/target/riscv/insn_trans/trans_privileged.c.inc b/target/riscv/insn_trans/trans_privileged.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_privileged.c.inc +++ b/target/riscv/insn_trans/trans_privileged.c.inc @@ -XXX,XX +XXX,XX @@ static bool trans_sfence_vma(DisasContext *ctx, arg_sfence_vma *a) #endif return false; } - -static bool trans_sfence_vm(DisasContext *ctx, arg_sfence_vm *a) -{ - return false; -} -- 2.48.1 From: Rajnesh Kanwal <rkanwal@rivosinc.com> The Control Transfer Records (CTR) extension provides a method to record a limited branch history in register-accessible internal chip storage. This extension is similar to Arch LBR in x86 and BRBE in ARM. The Extension has been stable and the latest release can be found here https://github.com/riscv/riscv-control-transfer-records/releases/tag/v1.0_rc5 Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250205-b4-ctr_upstream_v6-v6-2-439d8e06c8ef@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu_bits.h | 145 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 145 insertions(+) diff --git a/target/riscv/cpu_bits.h b/target/riscv/cpu_bits.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_bits.h +++ b/target/riscv/cpu_bits.h @@ -XXX,XX +XXX,XX @@ #define CSR_SIEH 0x114 #define CSR_SIPH 0x154 +/* Machine-Level Control transfer records CSRs */ +#define CSR_MCTRCTL 0x34e + +/* Supervisor-Level Control transfer records CSRs */ +#define CSR_SCTRCTL 0x14e +#define CSR_SCTRSTATUS 0x14f +#define CSR_SCTRDEPTH 0x15f + +/* VS-Level Control transfer records CSRs */ +#define CSR_VSCTRCTL 0x24e + /* Hpervisor CSRs */ #define CSR_HSTATUS 0x600 #define CSR_HEDELEG 0x602 @@ -XXX,XX +XXX,XX @@ #define SMSTATEEN0_CS (1ULL << 0) #define SMSTATEEN0_FCSR (1ULL << 1) #define SMSTATEEN0_JVT (1ULL << 2) +#define SMSTATEEN0_CTR (1ULL << 54) #define SMSTATEEN0_P1P13 (1ULL << 56) #define SMSTATEEN0_HSCONTXT (1ULL << 57) #define SMSTATEEN0_IMSIC (1ULL << 58) @@ -XXX,XX +XXX,XX @@ typedef enum RISCVException { #define HENVCFGH_PBMTE MENVCFGH_PBMTE #define HENVCFGH_STCE MENVCFGH_STCE +/* Offsets for every pair of control bits per each priv level */ +#define XS_OFFSET 0ULL +#define U_OFFSET 2ULL +#define S_OFFSET 5ULL +#define M_OFFSET 8ULL + +#define PM_XS_BITS (EXT_STATUS_MASK << XS_OFFSET) +#define U_PM_ENABLE (PM_ENABLE << U_OFFSET) +#define U_PM_CURRENT (PM_CURRENT << U_OFFSET) +#define U_PM_INSN (PM_INSN << U_OFFSET) +#define S_PM_ENABLE (PM_ENABLE << S_OFFSET) +#define S_PM_CURRENT (PM_CURRENT << S_OFFSET) +#define S_PM_INSN (PM_INSN << S_OFFSET) +#define M_PM_ENABLE (PM_ENABLE << M_OFFSET) +#define M_PM_CURRENT (PM_CURRENT << M_OFFSET) +#define M_PM_INSN (PM_INSN << M_OFFSET) + +/* mmte CSR bits */ +#define MMTE_PM_XS_BITS PM_XS_BITS +#define MMTE_U_PM_ENABLE U_PM_ENABLE +#define MMTE_U_PM_CURRENT U_PM_CURRENT +#define MMTE_U_PM_INSN U_PM_INSN +#define MMTE_S_PM_ENABLE S_PM_ENABLE +#define MMTE_S_PM_CURRENT S_PM_CURRENT +#define MMTE_S_PM_INSN S_PM_INSN +#define MMTE_M_PM_ENABLE M_PM_ENABLE +#define MMTE_M_PM_CURRENT M_PM_CURRENT +#define MMTE_M_PM_INSN M_PM_INSN +#define MMTE_MASK (MMTE_U_PM_ENABLE | MMTE_U_PM_CURRENT | MMTE_U_PM_INSN | \ + MMTE_S_PM_ENABLE | MMTE_S_PM_CURRENT | MMTE_S_PM_INSN | \ + MMTE_M_PM_ENABLE | MMTE_M_PM_CURRENT | MMTE_M_PM_INSN | \ + MMTE_PM_XS_BITS) + +/* (v)smte CSR bits */ +#define SMTE_PM_XS_BITS PM_XS_BITS +#define SMTE_U_PM_ENABLE U_PM_ENABLE +#define SMTE_U_PM_CURRENT U_PM_CURRENT +#define SMTE_U_PM_INSN U_PM_INSN +#define SMTE_S_PM_ENABLE S_PM_ENABLE +#define SMTE_S_PM_CURRENT S_PM_CURRENT +#define SMTE_S_PM_INSN S_PM_INSN +#define SMTE_MASK (SMTE_U_PM_ENABLE | SMTE_U_PM_CURRENT | SMTE_U_PM_INSN | \ + SMTE_S_PM_ENABLE | SMTE_S_PM_CURRENT | SMTE_S_PM_INSN | \ + SMTE_PM_XS_BITS) + +/* umte CSR bits */ +#define UMTE_U_PM_ENABLE U_PM_ENABLE +#define UMTE_U_PM_CURRENT U_PM_CURRENT +#define UMTE_U_PM_INSN U_PM_INSN +#define UMTE_MASK (UMTE_U_PM_ENABLE | MMTE_U_PM_CURRENT | UMTE_U_PM_INSN) + +/* CTR control register commom fields */ +#define XCTRCTL_U BIT_ULL(0) +#define XCTRCTL_S BIT_ULL(1) +#define XCTRCTL_RASEMU BIT_ULL(7) +#define XCTRCTL_STE BIT_ULL(8) +#define XCTRCTL_BPFRZ BIT_ULL(11) +#define XCTRCTL_LCOFIFRZ BIT_ULL(12) +#define XCTRCTL_EXCINH BIT_ULL(33) +#define XCTRCTL_INTRINH BIT_ULL(34) +#define XCTRCTL_TRETINH BIT_ULL(35) +#define XCTRCTL_NTBREN BIT_ULL(36) +#define XCTRCTL_TKBRINH BIT_ULL(37) +#define XCTRCTL_INDCALLINH BIT_ULL(40) +#define XCTRCTL_DIRCALLINH BIT_ULL(41) +#define XCTRCTL_INDJMPINH BIT_ULL(42) +#define XCTRCTL_DIRJMPINH BIT_ULL(43) +#define XCTRCTL_CORSWAPINH BIT_ULL(44) +#define XCTRCTL_RETINH BIT_ULL(45) +#define XCTRCTL_INDLJMPINH BIT_ULL(46) +#define XCTRCTL_DIRLJMPINH BIT_ULL(47) + +#define XCTRCTL_MASK (XCTRCTL_U | XCTRCTL_S | XCTRCTL_RASEMU | \ + XCTRCTL_STE | XCTRCTL_BPFRZ | XCTRCTL_LCOFIFRZ | \ + XCTRCTL_EXCINH | XCTRCTL_INTRINH | XCTRCTL_TRETINH | \ + XCTRCTL_NTBREN | XCTRCTL_TKBRINH | XCTRCTL_INDCALLINH | \ + XCTRCTL_DIRCALLINH | XCTRCTL_INDJMPINH | \ + XCTRCTL_DIRJMPINH | XCTRCTL_CORSWAPINH | \ + XCTRCTL_RETINH | XCTRCTL_INDLJMPINH | XCTRCTL_DIRLJMPINH) + +#define XCTRCTL_INH_START 32U + +/* CTR mctrctl bits */ +#define MCTRCTL_M BIT_ULL(2) +#define MCTRCTL_MTE BIT_ULL(9) + +#define MCTRCTL_MASK (XCTRCTL_MASK | MCTRCTL_M | MCTRCTL_MTE) +#define SCTRCTL_MASK XCTRCTL_MASK +#define VSCTRCTL_MASK XCTRCTL_MASK + +/* sctrstatus CSR bits. */ +#define SCTRSTATUS_WRPTR_MASK 0xFF +#define SCTRSTATUS_FROZEN BIT(31) +#define SCTRSTATUS_MASK (SCTRSTATUS_WRPTR_MASK | SCTRSTATUS_FROZEN) + +/* sctrdepth CSR bits. */ +#define SCTRDEPTH_MASK 0x7 +#define SCTRDEPTH_MIN 0U /* 16 Entries. */ +#define SCTRDEPTH_MAX 4U /* 256 Entries. */ + +#define CTR_ENTRIES_FIRST 0x200 +#define CTR_ENTRIES_LAST 0x2ff + +#define CTRSOURCE_VALID BIT(0) +#define CTRTARGET_MISP BIT(0) + +#define CTRDATA_TYPE_MASK 0xF +#define CTRDATA_CCV BIT(15) +#define CTRDATA_CCM_MASK 0xFFF0000 +#define CTRDATA_CCE_MASK 0xF0000000 + +#define CTRDATA_MASK (CTRDATA_TYPE_MASK | CTRDATA_CCV | \ + CTRDATA_CCM_MASK | CTRDATA_CCE_MASK) + +typedef enum CTRType { + CTRDATA_TYPE_NONE = 0, + CTRDATA_TYPE_EXCEPTION = 1, + CTRDATA_TYPE_INTERRUPT = 2, + CTRDATA_TYPE_EXCEP_INT_RET = 3, + CTRDATA_TYPE_NONTAKEN_BRANCH = 4, + CTRDATA_TYPE_TAKEN_BRANCH = 5, + CTRDATA_TYPE_RESERVED_0 = 6, + CTRDATA_TYPE_RESERVED_1 = 7, + CTRDATA_TYPE_INDIRECT_CALL = 8, + CTRDATA_TYPE_DIRECT_CALL = 9, + CTRDATA_TYPE_INDIRECT_JUMP = 10, + CTRDATA_TYPE_DIRECT_JUMP = 11, + CTRDATA_TYPE_CO_ROUTINE_SWAP = 12, + CTRDATA_TYPE_RETURN = 13, + CTRDATA_TYPE_OTHER_INDIRECT_JUMP = 14, + CTRDATA_TYPE_OTHER_DIRECT_JUMP = 15, +} CTRType; + /* MISELECT, SISELECT, and VSISELECT bits (AIA) */ #define ISELECT_IPRIO0 0x30 #define ISELECT_IPRIO15 0x3f -- 2.48.1 From: Rajnesh Kanwal <rkanwal@rivosinc.com> This commit adds support for [m|s|vs]ctrcontrol, sctrstatus and sctrdepth CSRs handling. Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250205-b4-ctr_upstream_v6-v6-3-439d8e06c8ef@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 5 ++ target/riscv/cpu_cfg.h | 2 + target/riscv/csr.c | 144 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 151 insertions(+) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ struct CPUArchState { target_ulong mcause; target_ulong mtval; /* since: priv-1.10.0 */ + uint64_t mctrctl; + uint32_t sctrdepth; + uint32_t sctrstatus; + uint64_t vsctrctl; + /* Machine and Supervisor interrupt priorities */ uint8_t miprio[64]; uint8_t siprio[64]; diff --git a/target/riscv/cpu_cfg.h b/target/riscv/cpu_cfg.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_cfg.h +++ b/target/riscv/cpu_cfg.h @@ -XXX,XX +XXX,XX @@ struct RISCVCPUConfig { bool ext_zvfhmin; bool ext_smaia; bool ext_ssaia; + bool ext_smctr; + bool ext_ssctr; bool ext_sscofpmf; bool ext_smepmp; bool ext_smrnmi; diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException hgatp(CPURISCVState *env, int csrno) return hmode(env, csrno); } +/* + * M-mode: + * Without ext_smctr raise illegal inst excep. + * Otherwise everything is accessible to m-mode. + * + * S-mode: + * Without ext_ssctr or mstateen.ctr raise illegal inst excep. + * Otherwise everything other than mctrctl is accessible. + * + * VS-mode: + * Without ext_ssctr or mstateen.ctr raise illegal inst excep. + * Without hstateen.ctr raise virtual illegal inst excep. + * Otherwise allow sctrctl (vsctrctl), sctrstatus, 0x200-0x2ff entry range. + * Always raise illegal instruction exception for sctrdepth. + */ +static RISCVException ctr_mmode(CPURISCVState *env, int csrno) +{ + /* Check if smctr-ext is present */ + if (riscv_cpu_cfg(env)->ext_smctr) { + return RISCV_EXCP_NONE; + } + + return RISCV_EXCP_ILLEGAL_INST; +} + +static RISCVException ctr_smode(CPURISCVState *env, int csrno) +{ + const RISCVCPUConfig *cfg = riscv_cpu_cfg(env); + + if (!cfg->ext_smctr && !cfg->ext_ssctr) { + return RISCV_EXCP_ILLEGAL_INST; + } + + RISCVException ret = smstateen_acc_ok(env, 0, SMSTATEEN0_CTR); + if (ret == RISCV_EXCP_NONE && csrno == CSR_SCTRDEPTH && + env->virt_enabled) { + return RISCV_EXCP_VIRT_INSTRUCTION_FAULT; + } + + return ret; +} + static RISCVException aia_hmode(CPURISCVState *env, int csrno) { int ret; @@ -XXX,XX +XXX,XX @@ static RISCVException write_mstateen0(CPURISCVState *env, int csrno, wr_mask |= (SMSTATEEN0_AIA | SMSTATEEN0_IMSIC); } + if (riscv_cpu_cfg(env)->ext_ssctr) { + wr_mask |= SMSTATEEN0_CTR; + } + return write_mstateen(env, csrno, wr_mask, new_val); } @@ -XXX,XX +XXX,XX @@ static RISCVException write_mstateen0h(CPURISCVState *env, int csrno, wr_mask |= SMSTATEEN0_P1P13; } + if (riscv_cpu_cfg(env)->ext_ssctr) { + wr_mask |= SMSTATEEN0_CTR; + } + return write_mstateenh(env, csrno, wr_mask, new_val); } @@ -XXX,XX +XXX,XX @@ static RISCVException write_hstateen0(CPURISCVState *env, int csrno, wr_mask |= (SMSTATEEN0_AIA | SMSTATEEN0_IMSIC); } + if (riscv_cpu_cfg(env)->ext_ssctr) { + wr_mask |= SMSTATEEN0_CTR; + } + return write_hstateen(env, csrno, wr_mask, new_val); } @@ -XXX,XX +XXX,XX @@ static RISCVException write_hstateen0h(CPURISCVState *env, int csrno, { uint64_t wr_mask = SMSTATEEN_STATEEN | SMSTATEEN0_HSENVCFG; + if (riscv_cpu_cfg(env)->ext_ssctr) { + wr_mask |= SMSTATEEN0_CTR; + } + return write_hstateenh(env, csrno, wr_mask, new_val); } @@ -XXX,XX +XXX,XX @@ static RISCVException write_satp(CPURISCVState *env, int csrno, return RISCV_EXCP_NONE; } +static RISCVException rmw_sctrdepth(CPURISCVState *env, int csrno, + target_ulong *ret_val, + target_ulong new_val, target_ulong wr_mask) +{ + uint64_t mask = wr_mask & SCTRDEPTH_MASK; + + if (ret_val) { + *ret_val = env->sctrdepth; + } + + env->sctrdepth = (env->sctrdepth & ~mask) | (new_val & mask); + + /* Correct depth. */ + if (mask) { + uint64_t depth = get_field(env->sctrdepth, SCTRDEPTH_MASK); + + if (depth > SCTRDEPTH_MAX) { + depth = SCTRDEPTH_MAX; + env->sctrdepth = set_field(env->sctrdepth, SCTRDEPTH_MASK, depth); + } + + /* Update sctrstatus.WRPTR with a legal value */ + depth = 16 << depth; + env->sctrstatus = + env->sctrstatus & (~SCTRSTATUS_WRPTR_MASK | (depth - 1)); + } + + return RISCV_EXCP_NONE; +} + +static RISCVException rmw_sctrstatus(CPURISCVState *env, int csrno, + target_ulong *ret_val, + target_ulong new_val, target_ulong wr_mask) +{ + uint32_t depth = 16 << get_field(env->sctrdepth, SCTRDEPTH_MASK); + uint32_t mask = wr_mask & SCTRSTATUS_MASK; + + if (ret_val) { + *ret_val = env->sctrstatus; + } + + env->sctrstatus = (env->sctrstatus & ~mask) | (new_val & mask); + + /* Update sctrstatus.WRPTR with a legal value */ + env->sctrstatus = env->sctrstatus & (~SCTRSTATUS_WRPTR_MASK | (depth - 1)); + + return RISCV_EXCP_NONE; +} + +static RISCVException rmw_xctrctl(CPURISCVState *env, int csrno, + target_ulong *ret_val, + target_ulong new_val, target_ulong wr_mask) +{ + uint64_t csr_mask, mask = wr_mask; + uint64_t *ctl_ptr = &env->mctrctl; + + if (csrno == CSR_MCTRCTL) { + csr_mask = MCTRCTL_MASK; + } else if (csrno == CSR_SCTRCTL && !env->virt_enabled) { + csr_mask = SCTRCTL_MASK; + } else { + /* + * This is for csrno == CSR_SCTRCTL and env->virt_enabled == true + * or csrno == CSR_VSCTRCTL. + */ + csr_mask = VSCTRCTL_MASK; + ctl_ptr = &env->vsctrctl; + } + + mask &= csr_mask; + + if (ret_val) { + *ret_val = *ctl_ptr & csr_mask; + } + + *ctl_ptr = (*ctl_ptr & ~mask) | (new_val & mask); + + return RISCV_EXCP_NONE; +} + static RISCVException read_vstopi(CPURISCVState *env, int csrno, target_ulong *val) { @@ -XXX,XX +XXX,XX @@ riscv_csr_operations csr_ops[CSR_TABLE_SIZE] = { [CSR_TINFO] = { "tinfo", debug, read_tinfo, write_ignore }, [CSR_MCONTEXT] = { "mcontext", debug, read_mcontext, write_mcontext }, + [CSR_MCTRCTL] = { "mctrctl", ctr_mmode, NULL, NULL, rmw_xctrctl }, + [CSR_SCTRCTL] = { "sctrctl", ctr_smode, NULL, NULL, rmw_xctrctl }, + [CSR_VSCTRCTL] = { "vsctrctl", ctr_smode, NULL, NULL, rmw_xctrctl }, + [CSR_SCTRDEPTH] = { "sctrdepth", ctr_smode, NULL, NULL, rmw_sctrdepth }, + [CSR_SCTRSTATUS] = { "sctrstatus", ctr_smode, NULL, NULL, rmw_sctrstatus }, + /* Performance Counters */ [CSR_HPMCOUNTER3] = { "hpmcounter3", ctr, read_hpmcounter }, [CSR_HPMCOUNTER4] = { "hpmcounter4", ctr, read_hpmcounter }, -- 2.48.1 From: Rajnesh Kanwal <rkanwal@rivosinc.com> This commit adds logic to records CTR entries of different types and adds required hooks in TCG and interrupt/Exception logic to record events. This commit also adds support to invoke freeze CTR logic for breakpoint exceptions and counter overflow interrupts. Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250205-b4-ctr_upstream_v6-v6-4-439d8e06c8ef@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 7 + target/riscv/helper.h | 1 + target/riscv/cpu_helper.c | 259 ++++++++++++++++++ target/riscv/op_helper.c | 19 ++ target/riscv/translate.c | 46 ++++ .../riscv/insn_trans/trans_privileged.c.inc | 2 + target/riscv/insn_trans/trans_rvi.c.inc | 75 +++++ target/riscv/insn_trans/trans_rvzce.c.inc | 21 ++ 8 files changed, 430 insertions(+) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ struct CPUArchState { uint32_t sctrstatus; uint64_t vsctrctl; + uint64_t ctr_src[16 << SCTRDEPTH_MAX]; + uint64_t ctr_dst[16 << SCTRDEPTH_MAX]; + uint64_t ctr_data[16 << SCTRDEPTH_MAX]; + /* Machine and Supervisor interrupt priorities */ uint8_t miprio[64]; uint8_t siprio[64]; @@ -XXX,XX +XXX,XX @@ RISCVException smstateen_acc_ok(CPURISCVState *env, int index, uint64_t bit); void riscv_cpu_set_mode(CPURISCVState *env, target_ulong newpriv, bool virt_en); +void riscv_ctr_add_entry(CPURISCVState *env, target_long src, target_long dst, + enum CTRType type, target_ulong prev_priv, bool prev_virt); + void riscv_translate_init(void); void riscv_translate_code(CPUState *cs, TranslationBlock *tb, int *max_insns, vaddr pc, void *host_pc); diff --git a/target/riscv/helper.h b/target/riscv/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/helper.h +++ b/target/riscv/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_1(wfi, void, env) DEF_HELPER_1(wrs_nto, void, env) DEF_HELPER_1(tlb_flush, void, env) DEF_HELPER_1(tlb_flush_all, void, env) +DEF_HELPER_4(ctr_add_entry, void, env, tl, tl, tl) /* Native Debug */ DEF_HELPER_1(itrigger_match, void, env) #endif diff --git a/target/riscv/cpu_helper.c b/target/riscv/cpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_helper.c +++ b/target/riscv/cpu_helper.c @@ -XXX,XX +XXX,XX @@ void riscv_cpu_set_aia_ireg_rmw_fn(CPURISCVState *env, uint32_t priv, } } +static void riscv_ctr_freeze(CPURISCVState *env, uint64_t freeze_mask, + bool virt) +{ + uint64_t ctl = virt ? env->vsctrctl : env->mctrctl; + + assert((freeze_mask & (~(XCTRCTL_BPFRZ | XCTRCTL_LCOFIFRZ))) == 0); + + if (ctl & freeze_mask) { + env->sctrstatus |= SCTRSTATUS_FROZEN; + } +} + +static uint64_t riscv_ctr_priv_to_mask(target_ulong priv, bool virt) +{ + switch (priv) { + case PRV_M: + return MCTRCTL_M; + case PRV_S: + if (virt) { + return XCTRCTL_S; + } + return XCTRCTL_S; + case PRV_U: + if (virt) { + return XCTRCTL_U; + } + return XCTRCTL_U; + } + + g_assert_not_reached(); +} + +static uint64_t riscv_ctr_get_control(CPURISCVState *env, target_long priv, + bool virt) +{ + switch (priv) { + case PRV_M: + return env->mctrctl; + case PRV_S: + case PRV_U: + if (virt) { + return env->vsctrctl; + } + return env->mctrctl; + } + + g_assert_not_reached(); +} + +/* + * This function assumes that src privilege and target privilege are not same + * and src privilege is less than target privilege. This includes the virtual + * state as well. + */ +static bool riscv_ctr_check_xte(CPURISCVState *env, target_long src_prv, + bool src_virt) +{ + target_long tgt_prv = env->priv; + bool res = true; + + /* + * VS and U mode are same in terms of xTE bits required to record an + * external trap. See 6.1.2. External Traps, table 8 External Trap Enable + * Requirements. This changes VS to U to simplify the logic a bit. + */ + if (src_virt && src_prv == PRV_S) { + src_prv = PRV_U; + } else if (env->virt_enabled && tgt_prv == PRV_S) { + tgt_prv = PRV_U; + } + + /* VU mode is an outlier here. */ + if (src_virt && src_prv == PRV_U) { + res &= !!(env->vsctrctl & XCTRCTL_STE); + } + + switch (src_prv) { + case PRV_U: + if (tgt_prv == PRV_U) { + break; + } + res &= !!(env->mctrctl & XCTRCTL_STE); + /* fall-through */ + case PRV_S: + if (tgt_prv == PRV_S) { + break; + } + res &= !!(env->mctrctl & MCTRCTL_MTE); + /* fall-through */ + case PRV_M: + break; + } + + return res; +} + +/* + * Special cases for traps and trap returns: + * + * 1- Traps, and trap returns, between enabled modes are recorded as normal. + * 2- Traps from an inhibited mode to an enabled mode, and trap returns from an + * enabled mode back to an inhibited mode, are partially recorded. In such + * cases, the PC from the inhibited mode (source PC for traps, and target PC + * for trap returns) is 0. + * + * 3- Trap returns from an inhibited mode to an enabled mode are not recorded. + * Traps from an enabled mode to an inhibited mode, known as external traps, + * receive special handling. + * By default external traps are not recorded, but a handshake mechanism exists + * to allow partial recording. Software running in the target mode of the trap + * can opt-in to allowing CTR to record traps into that mode even when the mode + * is inhibited. The MTE, STE, and VSTE bits allow M-mode, S-mode, and VS-mode, + * respectively, to opt-in. When an External Trap occurs, and xTE=1, such that + * x is the target privilege mode of the trap, will CTR record the trap. In such + * cases, the target PC is 0. + */ +/* + * CTR arrays are implemented as circular buffers and new entry is stored at + * sctrstatus.WRPTR, but they are presented to software as moving circular + * buffers. Which means, software get's the illusion that whenever a new entry + * is added the whole buffer is moved by one place and the new entry is added at + * the start keeping new entry at idx 0 and older ones follow. + * + * Depth = 16. + * + * buffer [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [A] [B] [C] [D] [E] [F] + * WRPTR W + * entry 7 6 5 4 3 2 1 0 F E D C B A 9 8 + * + * When a new entry is added: + * buffer [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [A] [B] [C] [D] [E] [F] + * WRPTR W + * entry 8 7 6 5 4 3 2 1 0 F E D C B A 9 + * + * entry here denotes the logical entry number that software can access + * using ctrsource, ctrtarget and ctrdata registers. So xiselect 0x200 + * will return entry 0 i-e buffer[8] and 0x201 will return entry 1 i-e + * buffer[7]. Here is how we convert entry to buffer idx. + * + * entry = isel - CTR_ENTRIES_FIRST; + * idx = (sctrstatus.WRPTR - entry - 1) & (depth - 1); + */ +void riscv_ctr_add_entry(CPURISCVState *env, target_long src, target_long dst, + enum CTRType type, target_ulong src_priv, bool src_virt) +{ + bool tgt_virt = env->virt_enabled; + uint64_t src_mask = riscv_ctr_priv_to_mask(src_priv, src_virt); + uint64_t tgt_mask = riscv_ctr_priv_to_mask(env->priv, tgt_virt); + uint64_t src_ctrl = riscv_ctr_get_control(env, src_priv, src_virt); + uint64_t tgt_ctrl = riscv_ctr_get_control(env, env->priv, tgt_virt); + uint64_t depth, head; + bool ext_trap = false; + + /* + * Return immediately if both target and src recording is disabled or if + * CTR is in frozen state. + */ + if ((!(src_ctrl & src_mask) && !(tgt_ctrl & tgt_mask)) || + env->sctrstatus & SCTRSTATUS_FROZEN) { + return; + } + + /* + * With RAS Emul enabled, only allow Indirect, direct calls, Function + * returns and Co-routine swap types. + */ + if (tgt_ctrl & XCTRCTL_RASEMU && + type != CTRDATA_TYPE_INDIRECT_CALL && + type != CTRDATA_TYPE_DIRECT_CALL && + type != CTRDATA_TYPE_RETURN && + type != CTRDATA_TYPE_CO_ROUTINE_SWAP) { + return; + } + + if (type == CTRDATA_TYPE_EXCEPTION || type == CTRDATA_TYPE_INTERRUPT) { + /* Case 2 for traps. */ + if (!(src_ctrl & src_mask)) { + src = 0; + } else if (!(tgt_ctrl & tgt_mask)) { + /* Check if target priv-mode has allowed external trap recording. */ + if (!riscv_ctr_check_xte(env, src_priv, src_virt)) { + return; + } + + ext_trap = true; + dst = 0; + } + } else if (type == CTRDATA_TYPE_EXCEP_INT_RET) { + /* + * Case 3 for trap returns. Trap returns from inhibited mode are not + * recorded. + */ + if (!(src_ctrl & src_mask)) { + return; + } + + /* Case 2 for trap returns. */ + if (!(tgt_ctrl & tgt_mask)) { + dst = 0; + } + } + + /* Ignore filters in case of RASEMU mode or External trap. */ + if (!(tgt_ctrl & XCTRCTL_RASEMU) && !ext_trap) { + /* + * Check if the specific type is inhibited. Not taken branch filter is + * an enable bit and needs to be checked separatly. + */ + bool check = tgt_ctrl & BIT_ULL(type + XCTRCTL_INH_START); + if ((type == CTRDATA_TYPE_NONTAKEN_BRANCH && !check) || + (type != CTRDATA_TYPE_NONTAKEN_BRANCH && check)) { + return; + } + } + + head = get_field(env->sctrstatus, SCTRSTATUS_WRPTR_MASK); + + depth = 16 << get_field(env->sctrdepth, SCTRDEPTH_MASK); + if (tgt_ctrl & XCTRCTL_RASEMU && type == CTRDATA_TYPE_RETURN) { + head = (head - 1) & (depth - 1); + + env->ctr_src[head] &= ~CTRSOURCE_VALID; + env->sctrstatus = + set_field(env->sctrstatus, SCTRSTATUS_WRPTR_MASK, head); + return; + } + + /* In case of Co-routine SWAP we overwrite latest entry. */ + if (tgt_ctrl & XCTRCTL_RASEMU && type == CTRDATA_TYPE_CO_ROUTINE_SWAP) { + head = (head - 1) & (depth - 1); + } + + env->ctr_src[head] = src | CTRSOURCE_VALID; + env->ctr_dst[head] = dst & ~CTRTARGET_MISP; + env->ctr_data[head] = set_field(0, CTRDATA_TYPE_MASK, type); + + head = (head + 1) & (depth - 1); + + env->sctrstatus = set_field(env->sctrstatus, SCTRSTATUS_WRPTR_MASK, head); +} + void riscv_cpu_set_mode(CPURISCVState *env, target_ulong newpriv, bool virt_en) { g_assert(newpriv <= PRV_M && newpriv != PRV_RESERVED); @@ -XXX,XX +XXX,XX @@ void riscv_cpu_do_interrupt(CPUState *cs) !(env->mip & (1ULL << cause)); bool smode_double_trap = false; uint64_t hdeleg = async ? env->hideleg : env->hedeleg; + const bool prev_virt = env->virt_enabled; + const target_ulong prev_priv = env->priv; target_ulong tval = 0; target_ulong tinst = 0; target_ulong htval = 0; target_ulong mtval2 = 0; + target_ulong src; int sxlen = 0; int mxlen = 16 << riscv_cpu_mxl(env); bool nnmi_excep = false; @@ -XXX,XX +XXX,XX @@ void riscv_cpu_do_interrupt(CPUState *cs) env->pc = (env->stvec >> 2 << 2) + ((async && (env->stvec & 3) == 1) ? cause * 4 : 0); riscv_cpu_set_mode(env, PRV_S, virt); + + src = env->sepc; } else { /* * If the hart encounters an exception while executing in M-mode @@ -XXX,XX +XXX,XX @@ void riscv_cpu_do_interrupt(CPUState *cs) ((async && (env->mtvec & 3) == 1) ? cause * 4 : 0); } riscv_cpu_set_mode(env, PRV_M, virt); + src = env->mepc; + } + + if (riscv_cpu_cfg(env)->ext_smctr || riscv_cpu_cfg(env)->ext_ssctr) { + if (async && cause == IRQ_PMU_OVF) { + riscv_ctr_freeze(env, XCTRCTL_LCOFIFRZ, virt); + } else if (!async && cause == RISCV_EXCP_BREAKPOINT) { + riscv_ctr_freeze(env, XCTRCTL_BPFRZ, virt); + } + + riscv_ctr_add_entry(env, src, env->pc, + async ? CTRDATA_TYPE_INTERRUPT : CTRDATA_TYPE_EXCEPTION, + prev_priv, prev_virt); } /* diff --git a/target/riscv/op_helper.c b/target/riscv/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/op_helper.c +++ b/target/riscv/op_helper.c @@ -XXX,XX +XXX,XX @@ target_ulong helper_sret(CPURISCVState *env) { uint64_t mstatus; target_ulong prev_priv, prev_virt = env->virt_enabled; + const target_ulong src_priv = env->priv; + const bool src_virt = env->virt_enabled; if (!(env->priv >= PRV_S)) { riscv_raise_exception(env, RISCV_EXCP_ILLEGAL_INST, GETPC()); @@ -XXX,XX +XXX,XX @@ target_ulong helper_sret(CPURISCVState *env) } env->mstatus = set_field(env->mstatus, MSTATUS_SPELP, 0); + if (riscv_cpu_cfg(env)->ext_smctr || riscv_cpu_cfg(env)->ext_ssctr) { + riscv_ctr_add_entry(env, env->pc, retpc, CTRDATA_TYPE_EXCEP_INT_RET, + src_priv, src_virt); + } + return retpc; } @@ -XXX,XX +XXX,XX @@ target_ulong helper_mret(CPURISCVState *env) } env->mstatus = set_field(env->mstatus, MSTATUS_MPELP, 0); + if (riscv_cpu_cfg(env)->ext_smctr || riscv_cpu_cfg(env)->ext_ssctr) { + riscv_ctr_add_entry(env, env->pc, retpc, CTRDATA_TYPE_EXCEP_INT_RET, + PRV_M, false); + } + return retpc; } @@ -XXX,XX +XXX,XX @@ target_ulong helper_mnret(CPURISCVState *env) return retpc; } +void helper_ctr_add_entry(CPURISCVState *env, target_ulong src, + target_ulong dest, target_ulong type) +{ + riscv_ctr_add_entry(env, src, dest, (enum CTRType)type, + env->priv, env->virt_enabled); +} + void helper_wfi(CPURISCVState *env) { CPUState *cs = env_cpu(env); diff --git a/target/riscv/translate.c b/target/riscv/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/translate.c +++ b/target/riscv/translate.c @@ -XXX,XX +XXX,XX @@ static void gen_set_fpr_d(DisasContext *ctx, int reg_num, TCGv_i64 t) } } +#ifndef CONFIG_USER_ONLY +/* + * Direct calls + * - jal x1; + * - jal x5; + * - c.jal. + * - cm.jalt. + * + * Direct jumps + * - jal x0; + * - c.j; + * - cm.jt. + * + * Other direct jumps + * - jal rd where rd != x1 and rd != x5 and rd != x0; + */ +static void gen_ctr_jal(DisasContext *ctx, int rd, target_ulong imm) +{ + TCGv dest = tcg_temp_new(); + TCGv src = tcg_temp_new(); + TCGv type; + + /* + * If rd is x1 or x5 link registers, treat this as direct call otherwise + * its a direct jump. + */ + if (rd == 1 || rd == 5) { + type = tcg_constant_tl(CTRDATA_TYPE_DIRECT_CALL); + } else if (rd == 0) { + type = tcg_constant_tl(CTRDATA_TYPE_DIRECT_JUMP); + } else { + type = tcg_constant_tl(CTRDATA_TYPE_OTHER_DIRECT_JUMP); + } + + gen_pc_plus_diff(dest, ctx, imm); + gen_pc_plus_diff(src, ctx, 0); + gen_helper_ctr_add_entry(tcg_env, src, dest, type); +} +#endif + static void gen_jal(DisasContext *ctx, int rd, target_ulong imm) { TCGv succ_pc = dest_gpr(ctx, rd); @@ -XXX,XX +XXX,XX @@ static void gen_jal(DisasContext *ctx, int rd, target_ulong imm) } } +#ifndef CONFIG_USER_ONLY + if (ctx->cfg_ptr->ext_smctr || ctx->cfg_ptr->ext_ssctr) { + gen_ctr_jal(ctx, rd, imm); + } +#endif + gen_pc_plus_diff(succ_pc, ctx, ctx->cur_insn_len); gen_set_gpr(ctx, rd, succ_pc); diff --git a/target/riscv/insn_trans/trans_privileged.c.inc b/target/riscv/insn_trans/trans_privileged.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_privileged.c.inc +++ b/target/riscv/insn_trans/trans_privileged.c.inc @@ -XXX,XX +XXX,XX @@ static bool trans_sret(DisasContext *ctx, arg_sret *a) if (has_ext(ctx, RVS)) { decode_save_opc(ctx, 0); translator_io_start(&ctx->base); + gen_update_pc(ctx, 0); gen_helper_sret(cpu_pc, tcg_env); exit_tb(ctx); /* no chaining */ ctx->base.is_jmp = DISAS_NORETURN; @@ -XXX,XX +XXX,XX @@ static bool trans_mret(DisasContext *ctx, arg_mret *a) #ifndef CONFIG_USER_ONLY decode_save_opc(ctx, 0); translator_io_start(&ctx->base); + gen_update_pc(ctx, 0); gen_helper_mret(cpu_pc, tcg_env); exit_tb(ctx); /* no chaining */ ctx->base.is_jmp = DISAS_NORETURN; diff --git a/target/riscv/insn_trans/trans_rvi.c.inc b/target/riscv/insn_trans/trans_rvi.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_rvi.c.inc +++ b/target/riscv/insn_trans/trans_rvi.c.inc @@ -XXX,XX +XXX,XX @@ static bool trans_jal(DisasContext *ctx, arg_jal *a) return true; } +#ifndef CONFIG_USER_ONLY +/* + * Indirect calls + * - jalr x1, rs where rs != x5; + * - jalr x5, rs where rs != x1; + * - c.jalr rs1 where rs1 != x5; + * + * Indirect jumps + * - jalr x0, rs where rs != x1 and rs != x5; + * - c.jr rs1 where rs1 != x1 and rs1 != x5. + * + * Returns + * - jalr rd, rs where (rs == x1 or rs == x5) and rd != x1 and rd != x5; + * - c.jr rs1 where rs1 == x1 or rs1 == x5. + * + * Co-routine swap + * - jalr x1, x5; + * - jalr x5, x1; + * - c.jalr x5. + * + * Other indirect jumps + * - jalr rd, rs where rs != x1, rs != x5, rd != x0, rd != x1 and rd != x5. + */ +static void gen_ctr_jalr(DisasContext *ctx, arg_jalr *a, TCGv dest) +{ + TCGv src = tcg_temp_new(); + TCGv type; + + if ((a->rd == 1 && a->rs1 != 5) || (a->rd == 5 && a->rs1 != 1)) { + type = tcg_constant_tl(CTRDATA_TYPE_INDIRECT_CALL); + } else if (a->rd == 0 && a->rs1 != 1 && a->rs1 != 5) { + type = tcg_constant_tl(CTRDATA_TYPE_INDIRECT_JUMP); + } else if ((a->rs1 == 1 || a->rs1 == 5) && (a->rd != 1 && a->rd != 5)) { + type = tcg_constant_tl(CTRDATA_TYPE_RETURN); + } else if ((a->rs1 == 1 && a->rd == 5) || (a->rs1 == 5 && a->rd == 1)) { + type = tcg_constant_tl(CTRDATA_TYPE_CO_ROUTINE_SWAP); + } else { + type = tcg_constant_tl(CTRDATA_TYPE_OTHER_INDIRECT_JUMP); + } + + gen_pc_plus_diff(src, ctx, 0); + gen_helper_ctr_add_entry(tcg_env, src, dest, type); +} +#endif + static bool trans_jalr(DisasContext *ctx, arg_jalr *a) { TCGLabel *misaligned = NULL; @@ -XXX,XX +XXX,XX @@ static bool trans_jalr(DisasContext *ctx, arg_jalr *a) gen_pc_plus_diff(succ_pc, ctx, ctx->cur_insn_len); gen_set_gpr(ctx, a->rd, succ_pc); +#ifndef CONFIG_USER_ONLY + if (ctx->cfg_ptr->ext_smctr || ctx->cfg_ptr->ext_ssctr) { + gen_ctr_jalr(ctx, a, target_pc); + } +#endif + tcg_gen_mov_tl(cpu_pc, target_pc); if (ctx->fcfi_enabled) { /* @@ -XXX,XX +XXX,XX @@ static bool gen_branch(DisasContext *ctx, arg_b *a, TCGCond cond) } else { tcg_gen_brcond_tl(cond, src1, src2, l); } + +#ifndef CONFIG_USER_ONLY + if (ctx->cfg_ptr->ext_smctr || ctx->cfg_ptr->ext_ssctr) { + TCGv type = tcg_constant_tl(CTRDATA_TYPE_NONTAKEN_BRANCH); + TCGv dest = tcg_temp_new(); + TCGv src = tcg_temp_new(); + + gen_pc_plus_diff(src, ctx, 0); + gen_pc_plus_diff(dest, ctx, ctx->cur_insn_len); + gen_helper_ctr_add_entry(tcg_env, src, dest, type); + } +#endif + gen_goto_tb(ctx, 1, ctx->cur_insn_len); ctx->pc_save = orig_pc_save; @@ -XXX,XX +XXX,XX @@ static bool gen_branch(DisasContext *ctx, arg_b *a, TCGCond cond) gen_pc_plus_diff(target_pc, ctx, a->imm); gen_exception_inst_addr_mis(ctx, target_pc); } else { +#ifndef CONFIG_USER_ONLY + if (ctx->cfg_ptr->ext_smctr || ctx->cfg_ptr->ext_ssctr) { + TCGv type = tcg_constant_tl(CTRDATA_TYPE_TAKEN_BRANCH); + TCGv dest = tcg_temp_new(); + TCGv src = tcg_temp_new(); + + gen_pc_plus_diff(src, ctx, 0); + gen_pc_plus_diff(dest, ctx, a->imm); + gen_helper_ctr_add_entry(tcg_env, src, dest, type); + } +#endif gen_goto_tb(ctx, 0, a->imm); } ctx->pc_save = -1; diff --git a/target/riscv/insn_trans/trans_rvzce.c.inc b/target/riscv/insn_trans/trans_rvzce.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_rvzce.c.inc +++ b/target/riscv/insn_trans/trans_rvzce.c.inc @@ -XXX,XX +XXX,XX @@ static bool gen_pop(DisasContext *ctx, arg_cmpp *a, bool ret, bool ret_val) if (ret) { TCGv ret_addr = get_gpr(ctx, xRA, EXT_SIGN); +#ifndef CONFIG_USER_ONLY + if (ctx->cfg_ptr->ext_smctr || ctx->cfg_ptr->ext_ssctr) { + TCGv type = tcg_constant_tl(CTRDATA_TYPE_RETURN); + TCGv src = tcg_temp_new(); + gen_pc_plus_diff(src, ctx, 0); + gen_helper_ctr_add_entry(tcg_env, src, ret_addr, type); + } +#endif tcg_gen_mov_tl(cpu_pc, ret_addr); tcg_gen_lookup_and_goto_ptr(); ctx->base.is_jmp = DISAS_NORETURN; @@ -XXX,XX +XXX,XX @@ static bool trans_cm_jalt(DisasContext *ctx, arg_cm_jalt *a) gen_set_gpr(ctx, xRA, succ_pc); } +#ifndef CONFIG_USER_ONLY + if (ctx->cfg_ptr->ext_smctr || ctx->cfg_ptr->ext_ssctr) { + if (a->index >= 32) { + TCGv type = tcg_constant_tl(CTRDATA_TYPE_DIRECT_CALL); + gen_helper_ctr_add_entry(tcg_env, cpu_pc, addr, type); + } else { + TCGv type = tcg_constant_tl(CTRDATA_TYPE_DIRECT_JUMP); + gen_helper_ctr_add_entry(tcg_env, cpu_pc, addr, type); + } + } +#endif + + tcg_gen_mov_tl(cpu_pc, addr); tcg_gen_lookup_and_goto_ptr(); -- 2.48.1 From: Rajnesh Kanwal <rkanwal@rivosinc.com> CTR extension adds a new instruction sctrclr to quickly clear the recorded entries buffer. Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250205-b4-ctr_upstream_v6-v6-5-439d8e06c8ef@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 1 + target/riscv/helper.h | 1 + target/riscv/insn32.decode | 1 + target/riscv/cpu_helper.c | 7 +++++ target/riscv/op_helper.c | 29 +++++++++++++++++++ .../riscv/insn_trans/trans_privileged.c.inc | 11 +++++++ 6 files changed, 50 insertions(+) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ void riscv_cpu_set_mode(CPURISCVState *env, target_ulong newpriv, bool virt_en); void riscv_ctr_add_entry(CPURISCVState *env, target_long src, target_long dst, enum CTRType type, target_ulong prev_priv, bool prev_virt); +void riscv_ctr_clear(CPURISCVState *env); void riscv_translate_init(void); void riscv_translate_code(CPUState *cs, TranslationBlock *tb, diff --git a/target/riscv/helper.h b/target/riscv/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/helper.h +++ b/target/riscv/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_6(csrrw_i128, tl, env, int, tl, tl, tl, tl) DEF_HELPER_1(sret, tl, env) DEF_HELPER_1(mret, tl, env) DEF_HELPER_1(mnret, tl, env) +DEF_HELPER_1(ctr_clear, void, env) DEF_HELPER_1(wfi, void, env) DEF_HELPER_1(wrs_nto, void, env) DEF_HELPER_1(tlb_flush, void, env) diff --git a/target/riscv/insn32.decode b/target/riscv/insn32.decode index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn32.decode +++ b/target/riscv/insn32.decode @@ -XXX,XX +XXX,XX @@ # *** Privileged Instructions *** ecall 000000000000 00000 000 00000 1110011 ebreak 000000000001 00000 000 00000 1110011 +sctrclr 000100000100 00000 000 00000 1110011 uret 0000000 00010 00000 000 00000 1110011 sret 0001000 00010 00000 000 00000 1110011 mret 0011000 00010 00000 000 00000 1110011 diff --git a/target/riscv/cpu_helper.c b/target/riscv/cpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_helper.c +++ b/target/riscv/cpu_helper.c @@ -XXX,XX +XXX,XX @@ static void riscv_ctr_freeze(CPURISCVState *env, uint64_t freeze_mask, } } +void riscv_ctr_clear(CPURISCVState *env) +{ + memset(env->ctr_src, 0x0, sizeof(env->ctr_src)); + memset(env->ctr_dst, 0x0, sizeof(env->ctr_dst)); + memset(env->ctr_data, 0x0, sizeof(env->ctr_data)); +} + static uint64_t riscv_ctr_priv_to_mask(target_ulong priv, bool virt) { switch (priv) { diff --git a/target/riscv/op_helper.c b/target/riscv/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/op_helper.c +++ b/target/riscv/op_helper.c @@ -XXX,XX +XXX,XX @@ void helper_ctr_add_entry(CPURISCVState *env, target_ulong src, env->priv, env->virt_enabled); } +void helper_ctr_clear(CPURISCVState *env) +{ + /* + * It's safe to call smstateen_acc_ok() for umode access regardless of the + * state of bit 54 (CTR bit in case of m/hstateen) of sstateen. If the bit + * is zero, smstateen_acc_ok() will return the correct exception code and + * if it's one, smstateen_acc_ok() will return RISCV_EXCP_NONE. In that + * scenario the U-mode check below will handle that case. + */ + RISCVException ret = smstateen_acc_ok(env, 0, SMSTATEEN0_CTR); + if (ret != RISCV_EXCP_NONE) { + riscv_raise_exception(env, ret, GETPC()); + } + + if (env->priv == PRV_U) { + /* + * One corner case is when sctrclr is executed from VU-mode and + * mstateen.CTR = 0, in which case we are supposed to raise + * RISCV_EXCP_ILLEGAL_INST. This case is already handled in + * smstateen_acc_ok(). + */ + uint32_t excep = env->virt_enabled ? RISCV_EXCP_VIRT_INSTRUCTION_FAULT : + RISCV_EXCP_ILLEGAL_INST; + riscv_raise_exception(env, excep, GETPC()); + } + + riscv_ctr_clear(env); +} + void helper_wfi(CPURISCVState *env) { CPUState *cs = env_cpu(env); diff --git a/target/riscv/insn_trans/trans_privileged.c.inc b/target/riscv/insn_trans/trans_privileged.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_privileged.c.inc +++ b/target/riscv/insn_trans/trans_privileged.c.inc @@ -XXX,XX +XXX,XX @@ static bool trans_ebreak(DisasContext *ctx, arg_ebreak *a) return true; } +static bool trans_sctrclr(DisasContext *ctx, arg_sctrclr *a) +{ +#ifndef CONFIG_USER_ONLY + if (ctx->cfg_ptr->ext_smctr || ctx->cfg_ptr->ext_ssctr) { + gen_helper_ctr_clear(tcg_env); + return true; + } +#endif + return false; +} + static bool trans_uret(DisasContext *ctx, arg_uret *a) { return false; -- 2.48.1 From: Rajnesh Kanwal <rkanwal@rivosinc.com> Add a subsection to machine.c to migrate CTR CSR state Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250205-b4-ctr_upstream_v6-v6-6-439d8e06c8ef@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/machine.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/target/riscv/machine.c b/target/riscv/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/machine.c +++ b/target/riscv/machine.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_envcfg = { } }; +static bool ctr_needed(void *opaque) +{ + RISCVCPU *cpu = opaque; + + return cpu->cfg.ext_smctr || cpu->cfg.ext_ssctr; +} + +static const VMStateDescription vmstate_ctr = { + .name = "cpu/ctr", + .version_id = 1, + .minimum_version_id = 1, + .needed = ctr_needed, + .fields = (const VMStateField[]) { + VMSTATE_UINT64(env.mctrctl, RISCVCPU), + VMSTATE_UINT32(env.sctrdepth, RISCVCPU), + VMSTATE_UINT32(env.sctrstatus, RISCVCPU), + VMSTATE_UINT64(env.vsctrctl, RISCVCPU), + VMSTATE_UINT64_ARRAY(env.ctr_src, RISCVCPU, 16 << SCTRDEPTH_MAX), + VMSTATE_UINT64_ARRAY(env.ctr_dst, RISCVCPU, 16 << SCTRDEPTH_MAX), + VMSTATE_UINT64_ARRAY(env.ctr_data, RISCVCPU, 16 << SCTRDEPTH_MAX), + VMSTATE_END_OF_LIST() + } +}; + static bool pmu_needed(void *opaque) { RISCVCPU *cpu = opaque; @@ -XXX,XX +XXX,XX @@ const VMStateDescription vmstate_riscv_cpu = { &vmstate_jvt, &vmstate_elp, &vmstate_ssp, + &vmstate_ctr, NULL } }; -- 2.48.1 From: julia <midnight@trainwit.ch> For instance, QEMUs newer than b6ecc63c569bb88c0fcadf79fb92bf4b88aefea8 would silently treat this akin to an unmapped page (as required by the RISC-V spec, admittedly). However, not all hardware platforms do (e.g. CVA6) which leads to an apparent QEMU bug. Instead, log a guest error so that in future, incorrectly set up page tables can be debugged without bisecting QEMU. Signed-off-by: julia <midnight@trainwit.ch> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20250203061852.2931556-1-midnight@trainwit.ch> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu_helper.c | 27 ++++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-) diff --git a/target/riscv/cpu_helper.c b/target/riscv/cpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_helper.c +++ b/target/riscv/cpu_helper.c @@ -XXX,XX +XXX,XX @@ static int get_physical_address(CPURISCVState *env, hwaddr *physical, ppn = pte >> PTE_PPN_SHIFT; } else { if (pte & PTE_RESERVED) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: reserved bits set in PTE: " + "addr: 0x%" HWADDR_PRIx " pte: 0x" TARGET_FMT_lx "\n", + __func__, pte_addr, pte); return TRANSLATE_FAIL; } if (!pbmte && (pte & PTE_PBMT)) { + /* Reserved without Svpbmt. */ + qemu_log_mask(LOG_GUEST_ERROR, "%s: PBMT bits set in PTE, " + "and Svpbmt extension is disabled: " + "addr: 0x%" HWADDR_PRIx " pte: 0x" TARGET_FMT_lx "\n", + __func__, pte_addr, pte); return TRANSLATE_FAIL; } if (!riscv_cpu_cfg(env)->ext_svnapot && (pte & PTE_N)) { + /* Reserved without Svnapot extension */ + qemu_log_mask(LOG_GUEST_ERROR, "%s: N bit set in PTE, " + "and Svnapot extension is disabled: " + "addr: 0x%" HWADDR_PRIx " pte: 0x" TARGET_FMT_lx "\n", + __func__, pte_addr, pte); return TRANSLATE_FAIL; } @@ -XXX,XX +XXX,XX @@ static int get_physical_address(CPURISCVState *env, hwaddr *physical, /* Invalid PTE */ return TRANSLATE_FAIL; } + if (pte & (PTE_R | PTE_W | PTE_X)) { goto leaf; } - /* Inner PTE, continue walking */ if (pte & (PTE_D | PTE_A | PTE_U | PTE_ATTR)) { + /* D, A, and U bits are reserved in non-leaf/inner PTEs */ + qemu_log_mask(LOG_GUEST_ERROR, "%s: D, A, or U bits set in non-leaf PTE: " + "addr: 0x%" HWADDR_PRIx " pte: 0x" TARGET_FMT_lx "\n", + __func__, pte_addr, pte); return TRANSLATE_FAIL; } + /* Inner PTE, continue walking */ base = ppn << PGSHIFT; } @@ -XXX,XX +XXX,XX @@ static int get_physical_address(CPURISCVState *env, hwaddr *physical, leaf: if (ppn & ((1ULL << ptshift) - 1)) { /* Misaligned PPN */ + qemu_log_mask(LOG_GUEST_ERROR, "%s: PPN bits in PTE is misaligned: " + "addr: 0x%" HWADDR_PRIx " pte: 0x" TARGET_FMT_lx "\n", + __func__, pte_addr, pte); return TRANSLATE_FAIL; } if (!pbmte && (pte & PTE_PBMT)) { /* Reserved without Svpbmt. */ + qemu_log_mask(LOG_GUEST_ERROR, "%s: PBMT bits set in PTE, " + "and Svpbmt extension is disabled: " + "addr: 0x%" HWADDR_PRIx " pte: 0x" TARGET_FMT_lx "\n", + __func__, pte_addr, pte); return TRANSLATE_FAIL; } -- 2.48.1 From: Rob Bradford <rbradford@rivosinc.com> Some extra spaces made into into the RISC-V opcode data table. Signed-off-by: Rob Bradford <rbradford@rivosinc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250206153410.236636-2-rbradford@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- disas/riscv.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/disas/riscv.c b/disas/riscv.c index XXXXXXX..XXXXXXX 100644 --- a/disas/riscv.c +++ b/disas/riscv.c @@ -XXX,XX +XXX,XX @@ const rv_opcode_data rvi_opcode_data[] = { { "aes32esi", rv_codec_k_bs, rv_fmt_rs1_rs2_bs, NULL, 0, 0, 0 }, { "aes32dsmi", rv_codec_k_bs, rv_fmt_rs1_rs2_bs, NULL, 0, 0, 0 }, { "aes32dsi", rv_codec_k_bs, rv_fmt_rs1_rs2_bs, NULL, 0, 0, 0 }, - { "aes64ks1i", rv_codec_k_rnum, rv_fmt_rd_rs1_rnum, NULL, 0, 0, 0 }, + { "aes64ks1i", rv_codec_k_rnum, rv_fmt_rd_rs1_rnum, NULL, 0, 0, 0 }, { "aes64ks2", rv_codec_r, rv_fmt_rd_rs1_rs2, NULL, 0, 0, 0 }, { "aes64im", rv_codec_r, rv_fmt_rd_rs1, NULL, 0, 0 }, { "aes64esm", rv_codec_r, rv_fmt_rd_rs1_rs2, NULL, 0, 0, 0 }, @@ -XXX,XX +XXX,XX @@ const rv_opcode_data rvi_opcode_data[] = { { "mop.rr.5", rv_codec_r, rv_fmt_rd_rs1_rs2, NULL, 0, 0, 0 }, { "mop.rr.6", rv_codec_r, rv_fmt_rd_rs1_rs2, NULL, 0, 0, 0 }, { "mop.rr.7", rv_codec_r, rv_fmt_rd_rs1_rs2, NULL, 0, 0, 0 }, - { "c.mop.1", rv_codec_ci_none, rv_fmt_none, NULL, 0, 0, 0 }, - { "c.mop.3", rv_codec_ci_none, rv_fmt_none, NULL, 0, 0, 0 }, - { "c.mop.5", rv_codec_ci_none, rv_fmt_none, NULL, 0, 0, 0 }, - { "c.mop.7", rv_codec_ci_none, rv_fmt_none, NULL, 0, 0, 0 }, - { "c.mop.9", rv_codec_ci_none, rv_fmt_none, NULL, 0, 0, 0 }, + { "c.mop.1", rv_codec_ci_none, rv_fmt_none, NULL, 0, 0, 0 }, + { "c.mop.3", rv_codec_ci_none, rv_fmt_none, NULL, 0, 0, 0 }, + { "c.mop.5", rv_codec_ci_none, rv_fmt_none, NULL, 0, 0, 0 }, + { "c.mop.7", rv_codec_ci_none, rv_fmt_none, NULL, 0, 0, 0 }, + { "c.mop.9", rv_codec_ci_none, rv_fmt_none, NULL, 0, 0, 0 }, { "c.mop.11", rv_codec_ci_none, rv_fmt_none, NULL, 0, 0, 0 }, { "c.mop.13", rv_codec_ci_none, rv_fmt_none, NULL, 0, 0, 0 }, { "c.mop.15", rv_codec_ci_none, rv_fmt_none, NULL, 0, 0, 0 }, -- 2.48.1 From: Rob Bradford <rbradford@rivosinc.com> This reflects the latest frozen version of the RISC-V Debug specification (1.0.0-rc4) which includes the Sdtrig extension. Signed-off-by: Rob Bradford <rbradford@rivosinc.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250206153410.236636-3-rbradford@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- disas/riscv.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/disas/riscv.c b/disas/riscv.c index XXXXXXX..XXXXXXX 100644 --- a/disas/riscv.c +++ b/disas/riscv.c @@ -XXX,XX +XXX,XX @@ static const char *csr_name(int csrno) case 0x07a1: return "tdata1"; case 0x07a2: return "tdata2"; case 0x07a3: return "tdata3"; + case 0x07a4: return "tinfo"; case 0x07b0: return "dcsr"; case 0x07b1: return "dpc"; - case 0x07b2: return "dscratch"; + case 0x07b2: return "dscratch0"; + case 0x07b3: return "dscratch1"; case 0x0b00: return "mcycle"; case 0x0b01: return "mtime"; case 0x0b02: return "minstret"; -- 2.48.1 From: Atish Patra <atishp@rivosinc.com> As per the latest privilege specification v1.13[1], the sscofpmf only reserves first 8 bits of hpmeventX. Update the corresponding masks accordingly. [1]https://github.com/riscv/riscv-isa-manual/issues/1578 Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Signed-off-by: Atish Patra <atishp@rivosinc.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250206-pmu_minor_fixes-v2-1-1bb0f4aeb8b4@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu_bits.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/target/riscv/cpu_bits.h b/target/riscv/cpu_bits.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_bits.h +++ b/target/riscv/cpu_bits.h @@ -XXX,XX +XXX,XX @@ typedef enum CTRType { MHPMEVENTH_BIT_VSINH | \ MHPMEVENTH_BIT_VUINH) -#define MHPMEVENT_SSCOF_MASK _ULL(0xFFFF000000000000) -#define MHPMEVENT_IDX_MASK 0xFFFFF -#define MHPMEVENT_SSCOF_RESVD 16 +#define MHPMEVENT_SSCOF_MASK MAKE_64BIT_MASK(63, 56) +#define MHPMEVENT_IDX_MASK (~MHPMEVENT_SSCOF_MASK) /* RISC-V-specific interrupt pending bits. */ #define CPU_INTERRUPT_RNMI CPU_INTERRUPT_TGT_EXT_0 -- 2.48.1 From: Atish Patra <atishp@rivosinc.com> As per the ISA definition, the upper 8 bits in hpmevent are defined by Sscofpmf for privilege mode filtering and overflow bits while the lower 56 bits are desginated for platform specific hpmevent values. For the reset case, mhpmevent value should have zero in lower 56 bits. Software may set the OF bit to indicate disable interrupt. Ensure that correct value is checked after masking while clearing the event encodings. Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Atish Patra <atishp@rivosinc.com> Message-ID: <20250206-pmu_minor_fixes-v2-2-1bb0f4aeb8b4@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/pmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/riscv/pmu.c b/target/riscv/pmu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/pmu.c +++ b/target/riscv/pmu.c @@ -XXX,XX +XXX,XX @@ int riscv_pmu_update_event_map(CPURISCVState *env, uint64_t value, * Expected mhpmevent value is zero for reset case. Remove the current * mapping. */ - if (!value) { + if (!(value & MHPMEVENT_IDX_MASK)) { g_hash_table_foreach_remove(cpu->pmu_event_ctr_map, pmu_remove_event_map, GUINT_TO_POINTER(ctr_idx)); -- 2.48.1 From: Clément Léger <cleger@rivosinc.com> As raised by Richard Henderson, these warnings are displayed in user only as well. Since they aren't really useful for the end-user, remove them and add a "TODO" note in the leading comments. Signed-off-by: Clément Léger <cleger@rivosinc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20250213145640.117275-1-cleger@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_init_max_cpu_extensions(Object *obj) } /* - * ext_smrnmi requires OpenSBI changes that our current + * TODO: ext_smrnmi requires OpenSBI changes that our current * image does not have. Disable it for now. */ if (cpu->cfg.ext_smrnmi) { isa_ext_update_enabled(cpu, CPU_CFG_OFFSET(ext_smrnmi), false); - qemu_log("Smrnmi is disabled in the 'max' type CPU\n"); } /* - * ext_smdbltrp requires the firmware to clear MSTATUS.MDT on startup to - * avoid generating a double trap. OpenSBI does not currently support it, + * TODO: ext_smdbltrp requires the firmware to clear MSTATUS.MDT on startup + * to avoid generating a double trap. OpenSBI does not currently support it, * disable it for now. */ if (cpu->cfg.ext_smdbltrp) { isa_ext_update_enabled(cpu, CPU_CFG_OFFSET(ext_smdbltrp), false); - qemu_log("Smdbltrp is disabled in the 'max' type CPU\n"); } } -- 2.48.1 From: Rajnesh Kanwal <rkanwal@rivosinc.com> CTR entries are accessed using ctrsource, ctrtarget and ctrdata registers using smcsrind/sscsrind extension. This commits extends the csrind extension to support CTR registers. ctrsource is accessible through xireg CSR, ctrtarget is accessible through xireg1 and ctrdata is accessible through xireg2 CSR. CTR supports maximum depth of 256 entries which are accessed using xiselect range 0x200 to 0x2ff. This commits also adds properties to enable CTR extension. CTR can be enabled using smctr=true and ssctr=true now. Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250212-b4-ctr_upstream_v6-v7-1-4e8159ea33bf@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 26 ++++++- target/riscv/csr.c | 150 ++++++++++++++++++++++++++++++++++++- target/riscv/tcg/tcg-cpu.c | 11 +++ 3 files changed, 185 insertions(+), 2 deletions(-) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(ssu64xl, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(supm, PRIV_VERSION_1_13_0, ext_supm), ISA_EXT_DATA_ENTRY(svade, PRIV_VERSION_1_11_0, ext_svade), + ISA_EXT_DATA_ENTRY(smctr, PRIV_VERSION_1_12_0, ext_smctr), + ISA_EXT_DATA_ENTRY(ssctr, PRIV_VERSION_1_12_0, ext_ssctr), ISA_EXT_DATA_ENTRY(svadu, PRIV_VERSION_1_12_0, ext_svadu), ISA_EXT_DATA_ENTRY(svinval, PRIV_VERSION_1_12_0, ext_svinval), ISA_EXT_DATA_ENTRY(svnapot, PRIV_VERSION_1_12_0, ext_svnapot), @@ -XXX,XX +XXX,XX @@ const RISCVCPUMultiExtConfig riscv_cpu_extensions[] = { MULTI_EXT_CFG_BOOL("smcdeleg", ext_smcdeleg, false), MULTI_EXT_CFG_BOOL("sscsrind", ext_sscsrind, false), MULTI_EXT_CFG_BOOL("ssccfg", ext_ssccfg, false), + MULTI_EXT_CFG_BOOL("smctr", ext_smctr, false), + MULTI_EXT_CFG_BOOL("ssctr", ext_ssctr, false), MULTI_EXT_CFG_BOOL("zifencei", ext_zifencei, true), MULTI_EXT_CFG_BOOL("zicfilp", ext_zicfilp, false), MULTI_EXT_CFG_BOOL("zicfiss", ext_zicfiss, false), @@ -XXX,XX +XXX,XX @@ static RISCVCPUImpliedExtsRule SSPM_IMPLIED = { }, }; +static RISCVCPUImpliedExtsRule SMCTR_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_smctr), + .implied_misa_exts = RVS, + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_sscsrind), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + +static RISCVCPUImpliedExtsRule SSCTR_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_ssctr), + .implied_misa_exts = RVS, + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_sscsrind), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + RISCVCPUImpliedExtsRule *riscv_misa_ext_implied_rules[] = { &RVA_IMPLIED, &RVD_IMPLIED, &RVF_IMPLIED, &RVM_IMPLIED, &RVV_IMPLIED, NULL @@ -XXX,XX +XXX,XX @@ RISCVCPUImpliedExtsRule *riscv_multi_ext_implied_rules[] = { &ZVFH_IMPLIED, &ZVFHMIN_IMPLIED, &ZVKN_IMPLIED, &ZVKNC_IMPLIED, &ZVKNG_IMPLIED, &ZVKNHB_IMPLIED, &ZVKS_IMPLIED, &ZVKSC_IMPLIED, &ZVKSG_IMPLIED, &SSCFG_IMPLIED, - &SUPM_IMPLIED, &SSPM_IMPLIED, + &SUPM_IMPLIED, &SSPM_IMPLIED, &SMCTR_IMPLIED, &SSCTR_IMPLIED, NULL }; diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static bool xiselect_cd_range(target_ulong isel) return (ISELECT_CD_FIRST <= isel && isel <= ISELECT_CD_LAST); } +static bool xiselect_ctr_range(int csrno, target_ulong isel) +{ + /* MIREG-MIREG6 for the range 0x200-0x2ff are not used by CTR. */ + return CTR_ENTRIES_FIRST <= isel && isel <= CTR_ENTRIES_LAST && + csrno < CSR_MIREG; +} + static int rmw_iprio(target_ulong xlen, target_ulong iselect, uint8_t *iprio, target_ulong *val, target_ulong new_val, @@ -XXX,XX +XXX,XX @@ static int rmw_iprio(target_ulong xlen, return 0; } +static int rmw_ctrsource(CPURISCVState *env, int isel, target_ulong *val, + target_ulong new_val, target_ulong wr_mask) +{ + /* + * CTR arrays are treated as circular buffers and TOS always points to next + * empty slot, keeping TOS - 1 always pointing to latest entry. Given entry + * 0 is always the latest one, traversal is a bit different here. See the + * below example. + * + * Depth = 16. + * + * idx [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [A] [B] [C] [D] [E] [F] + * TOS H + * entry 6 5 4 3 2 1 0 F E D C B A 9 8 7 + */ + const uint64_t entry = isel - CTR_ENTRIES_FIRST; + const uint64_t depth = 16 << get_field(env->sctrdepth, SCTRDEPTH_MASK); + uint64_t idx; + + /* Entry greater than depth-1 is read-only zero */ + if (entry >= depth) { + if (val) { + *val = 0; + } + return 0; + } + + idx = get_field(env->sctrstatus, SCTRSTATUS_WRPTR_MASK); + idx = (idx - entry - 1) & (depth - 1); + + if (val) { + *val = env->ctr_src[idx]; + } + + env->ctr_src[idx] = (env->ctr_src[idx] & ~wr_mask) | (new_val & wr_mask); + + return 0; +} + +static int rmw_ctrtarget(CPURISCVState *env, int isel, target_ulong *val, + target_ulong new_val, target_ulong wr_mask) +{ + /* + * CTR arrays are treated as circular buffers and TOS always points to next + * empty slot, keeping TOS - 1 always pointing to latest entry. Given entry + * 0 is always the latest one, traversal is a bit different here. See the + * below example. + * + * Depth = 16. + * + * idx [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [A] [B] [C] [D] [E] [F] + * head H + * entry 6 5 4 3 2 1 0 F E D C B A 9 8 7 + */ + const uint64_t entry = isel - CTR_ENTRIES_FIRST; + const uint64_t depth = 16 << get_field(env->sctrdepth, SCTRDEPTH_MASK); + uint64_t idx; + + /* Entry greater than depth-1 is read-only zero */ + if (entry >= depth) { + if (val) { + *val = 0; + } + return 0; + } + + idx = get_field(env->sctrstatus, SCTRSTATUS_WRPTR_MASK); + idx = (idx - entry - 1) & (depth - 1); + + if (val) { + *val = env->ctr_dst[idx]; + } + + env->ctr_dst[idx] = (env->ctr_dst[idx] & ~wr_mask) | (new_val & wr_mask); + + return 0; +} + +static int rmw_ctrdata(CPURISCVState *env, int isel, target_ulong *val, + target_ulong new_val, target_ulong wr_mask) +{ + /* + * CTR arrays are treated as circular buffers and TOS always points to next + * empty slot, keeping TOS - 1 always pointing to latest entry. Given entry + * 0 is always the latest one, traversal is a bit different here. See the + * below example. + * + * Depth = 16. + * + * idx [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [A] [B] [C] [D] [E] [F] + * head H + * entry 6 5 4 3 2 1 0 F E D C B A 9 8 7 + */ + const uint64_t entry = isel - CTR_ENTRIES_FIRST; + const uint64_t mask = wr_mask & CTRDATA_MASK; + const uint64_t depth = 16 << get_field(env->sctrdepth, SCTRDEPTH_MASK); + uint64_t idx; + + /* Entry greater than depth-1 is read-only zero */ + if (entry >= depth) { + if (val) { + *val = 0; + } + return 0; + } + + idx = get_field(env->sctrstatus, SCTRSTATUS_WRPTR_MASK); + idx = (idx - entry - 1) & (depth - 1); + + if (val) { + *val = env->ctr_data[idx]; + } + + env->ctr_data[idx] = (env->ctr_data[idx] & ~mask) | (new_val & mask); + + return 0; +} + static RISCVException rmw_xireg_aia(CPURISCVState *env, int csrno, target_ulong isel, target_ulong *val, target_ulong new_val, target_ulong wr_mask) @@ -XXX,XX +XXX,XX @@ done: return ret; } +static int rmw_xireg_ctr(CPURISCVState *env, int csrno, + target_ulong isel, target_ulong *val, + target_ulong new_val, target_ulong wr_mask) +{ + if (!riscv_cpu_cfg(env)->ext_smctr && !riscv_cpu_cfg(env)->ext_ssctr) { + return -EINVAL; + } + + if (csrno == CSR_SIREG || csrno == CSR_VSIREG) { + return rmw_ctrsource(env, isel, val, new_val, wr_mask); + } else if (csrno == CSR_SIREG2 || csrno == CSR_VSIREG2) { + return rmw_ctrtarget(env, isel, val, new_val, wr_mask); + } else if (csrno == CSR_SIREG3 || csrno == CSR_VSIREG3) { + return rmw_ctrdata(env, isel, val, new_val, wr_mask); + } else if (val) { + *val = 0; + } + + return 0; +} + /* * rmw_xireg_csrind: Perform indirect access to xireg and xireg2-xireg6 * @@ -XXX,XX +XXX,XX @@ static int rmw_xireg_csrind(CPURISCVState *env, int csrno, target_ulong isel, target_ulong *val, target_ulong new_val, target_ulong wr_mask) { - int ret = -EINVAL; bool virt = csrno == CSR_VSIREG ? true : false; + int ret = -EINVAL; if (xiselect_cd_range(isel)) { ret = rmw_xireg_cd(env, csrno, isel, val, new_val, wr_mask); + } else if (xiselect_ctr_range(csrno, isel)) { + ret = rmw_xireg_ctr(env, csrno, isel, val, new_val, wr_mask); } else { /* * As per the specification, access to unimplented region is undefined diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ void riscv_cpu_validate_set_extensions(RISCVCPU *cpu, Error **errp) return; } + if ((cpu->cfg.ext_smctr || cpu->cfg.ext_ssctr) && + (!riscv_has_ext(env, RVS) || !cpu->cfg.ext_sscsrind)) { + if (cpu_cfg_ext_is_user_set(CPU_CFG_OFFSET(ext_smctr)) || + cpu_cfg_ext_is_user_set(CPU_CFG_OFFSET(ext_ssctr))) { + error_setg(errp, "Smctr and Ssctr require S-mode and Sscsrind"); + return; + } + cpu->cfg.ext_smctr = false; + cpu->cfg.ext_ssctr = false; + } + /* * Disable isa extensions based on priv spec after we * validated and set everything we need. -- 2.48.1 From: Rob Bradford <rbradford@rivosinc.com> When running in TOR mode (Top of Range) the next PMP entry controls whether the entry is locked. However simply checking if the PMP_LOCK bit is set is not sufficient with the Smepmp extension which now provides a bit (mseccfg.RLB (Rule Lock Bypass)) to disregard the lock bits. In order to respect this bit use the convenience pmp_is_locked() function rather than directly checking PMP_LOCK since this function checks mseccfg.RLB. Signed-off-by: Rob Bradford <rbradford@rivosinc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20250210153713.343626-1-rbradford@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/pmp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/riscv/pmp.c b/target/riscv/pmp.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/pmp.c +++ b/target/riscv/pmp.c @@ -XXX,XX +XXX,XX @@ void pmpaddr_csr_write(CPURISCVState *env, uint32_t addr_index, uint8_t pmp_cfg = env->pmp_state.pmp[addr_index + 1].cfg_reg; is_next_cfg_tor = PMP_AMATCH_TOR == pmp_get_a_field(pmp_cfg); - if (pmp_cfg & PMP_LOCK && is_next_cfg_tor) { + if (pmp_is_locked(env, addr_index + 1) && is_next_cfg_tor) { qemu_log_mask(LOG_GUEST_ERROR, "ignoring pmpaddr write - pmpcfg + 1 locked\n"); return; -- 2.48.1 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Update headers to retrieve the latest KVM caps for RISC-V. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20250221153758.652078-2-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/standard-headers/linux/ethtool.h | 4 + include/standard-headers/linux/fuse.h | 76 ++++++++++++++++++- .../linux/input-event-codes.h | 1 + include/standard-headers/linux/pci_regs.h | 16 ++-- include/standard-headers/linux/virtio_pci.h | 14 ++++ linux-headers/asm-arm64/kvm.h | 3 - linux-headers/asm-loongarch/kvm_para.h | 1 + linux-headers/asm-riscv/kvm.h | 7 +- linux-headers/asm-x86/kvm.h | 1 + linux-headers/linux/iommufd.h | 35 ++++++--- linux-headers/linux/kvm.h | 8 +- linux-headers/linux/stddef.h | 13 +++- linux-headers/linux/vduse.h | 2 +- 13 files changed, 146 insertions(+), 35 deletions(-) diff --git a/include/standard-headers/linux/ethtool.h b/include/standard-headers/linux/ethtool.h index XXXXXXX..XXXXXXX 100644 --- a/include/standard-headers/linux/ethtool.h +++ b/include/standard-headers/linux/ethtool.h @@ -XXX,XX +XXX,XX @@ enum ethtool_link_ext_substate_module { * @ETH_SS_STATS_ETH_MAC: names of IEEE 802.3 MAC statistics * @ETH_SS_STATS_ETH_CTRL: names of IEEE 802.3 MAC Control statistics * @ETH_SS_STATS_RMON: names of RMON statistics + * @ETH_SS_STATS_PHY: names of PHY(dev) statistics + * @ETH_SS_TS_FLAGS: hardware timestamping flags * * @ETH_SS_COUNT: number of defined string sets */ @@ -XXX,XX +XXX,XX @@ enum ethtool_stringset { ETH_SS_STATS_ETH_MAC, ETH_SS_STATS_ETH_CTRL, ETH_SS_STATS_RMON, + ETH_SS_STATS_PHY, + ETH_SS_TS_FLAGS, /* add new constants above here */ ETH_SS_COUNT diff --git a/include/standard-headers/linux/fuse.h b/include/standard-headers/linux/fuse.h index XXXXXXX..XXXXXXX 100644 --- a/include/standard-headers/linux/fuse.h +++ b/include/standard-headers/linux/fuse.h @@ -XXX,XX +XXX,XX @@ * * 7.41 * - add FUSE_ALLOW_IDMAP + * 7.42 + * - Add FUSE_OVER_IO_URING and all other io-uring related flags and data + * structures: + * - struct fuse_uring_ent_in_out + * - struct fuse_uring_req_header + * - struct fuse_uring_cmd_req + * - FUSE_URING_IN_OUT_HEADER_SZ + * - FUSE_URING_OP_IN_OUT_SZ + * - enum fuse_uring_cmd */ #ifndef _LINUX_FUSE_H @@ -XXX,XX +XXX,XX @@ #define FUSE_KERNEL_VERSION 7 /** Minor version number of this interface */ -#define FUSE_KERNEL_MINOR_VERSION 41 +#define FUSE_KERNEL_MINOR_VERSION 42 /** The node ID of the root inode */ #define FUSE_ROOT_ID 1 @@ -XXX,XX +XXX,XX @@ struct fuse_file_lock { * FUSE_HAS_RESEND: kernel supports resending pending requests, and the high bit * of the request ID indicates resend requests * FUSE_ALLOW_IDMAP: allow creation of idmapped mounts + * FUSE_OVER_IO_URING: Indicate that client supports io-uring */ #define FUSE_ASYNC_READ (1 << 0) #define FUSE_POSIX_LOCKS (1 << 1) @@ -XXX,XX +XXX,XX @@ struct fuse_file_lock { /* Obsolete alias for FUSE_DIRECT_IO_ALLOW_MMAP */ #define FUSE_DIRECT_IO_RELAX FUSE_DIRECT_IO_ALLOW_MMAP #define FUSE_ALLOW_IDMAP (1ULL << 40) +#define FUSE_OVER_IO_URING (1ULL << 41) /** * CUSE INIT request/reply flags @@ -XXX,XX +XXX,XX @@ struct fuse_supp_groups { uint32_t groups[]; }; +/** + * Size of the ring buffer header + */ +#define FUSE_URING_IN_OUT_HEADER_SZ 128 +#define FUSE_URING_OP_IN_OUT_SZ 128 + +/* Used as part of the fuse_uring_req_header */ +struct fuse_uring_ent_in_out { + uint64_t flags; + + /* + * commit ID to be used in a reply to a ring request (see also + * struct fuse_uring_cmd_req) + */ + uint64_t commit_id; + + /* size of user payload buffer */ + uint32_t payload_sz; + uint32_t padding; + + uint64_t reserved; +}; + +/** + * Header for all fuse-io-uring requests + */ +struct fuse_uring_req_header { + /* struct fuse_in_header / struct fuse_out_header */ + char in_out[FUSE_URING_IN_OUT_HEADER_SZ]; + + /* per op code header */ + char op_in[FUSE_URING_OP_IN_OUT_SZ]; + + struct fuse_uring_ent_in_out ring_ent_in_out; +}; + +/** + * sqe commands to the kernel + */ +enum fuse_uring_cmd { + FUSE_IO_URING_CMD_INVALID = 0, + + /* register the request buffer and fetch a fuse request */ + FUSE_IO_URING_CMD_REGISTER = 1, + + /* commit fuse request result and fetch next request */ + FUSE_IO_URING_CMD_COMMIT_AND_FETCH = 2, +}; + +/** + * In the 80B command area of the SQE. + */ +struct fuse_uring_cmd_req { + uint64_t flags; + + /* entry identifier for commits */ + uint64_t commit_id; + + /* queue the command is for (queue index) */ + uint16_t qid; + uint8_t padding[6]; +}; + #endif /* _LINUX_FUSE_H */ diff --git a/include/standard-headers/linux/input-event-codes.h b/include/standard-headers/linux/input-event-codes.h index XXXXXXX..XXXXXXX 100644 --- a/include/standard-headers/linux/input-event-codes.h +++ b/include/standard-headers/linux/input-event-codes.h @@ -XXX,XX +XXX,XX @@ #define KEY_NOTIFICATION_CENTER 0x1bc /* Show/hide the notification center */ #define KEY_PICKUP_PHONE 0x1bd /* Answer incoming call */ #define KEY_HANGUP_PHONE 0x1be /* Decline incoming call */ +#define KEY_LINK_PHONE 0x1bf /* AL Phone Syncing */ #define KEY_DEL_EOL 0x1c0 #define KEY_DEL_EOS 0x1c1 diff --git a/include/standard-headers/linux/pci_regs.h b/include/standard-headers/linux/pci_regs.h index XXXXXXX..XXXXXXX 100644 --- a/include/standard-headers/linux/pci_regs.h +++ b/include/standard-headers/linux/pci_regs.h @@ -XXX,XX +XXX,XX @@ #define PCI_EXP_DEVSTA_TRPND 0x0020 /* Transactions Pending */ #define PCI_CAP_EXP_RC_ENDPOINT_SIZEOF_V1 12 /* v1 endpoints without link end here */ #define PCI_EXP_LNKCAP 0x0c /* Link Capabilities */ -#define PCI_EXP_LNKCAP_SLS 0x0000000f /* Supported Link Speeds */ +#define PCI_EXP_LNKCAP_SLS 0x0000000f /* Max Link Speed (prior to PCIe r3.0: Supported Link Speeds) */ #define PCI_EXP_LNKCAP_SLS_2_5GB 0x00000001 /* LNKCAP2 SLS Vector bit 0 */ #define PCI_EXP_LNKCAP_SLS_5_0GB 0x00000002 /* LNKCAP2 SLS Vector bit 1 */ #define PCI_EXP_LNKCAP_SLS_8_0GB 0x00000003 /* LNKCAP2 SLS Vector bit 2 */ @@ -XXX,XX +XXX,XX @@ #define PCI_EXP_DEVCAP2_OBFF_MSG 0x00040000 /* New message signaling */ #define PCI_EXP_DEVCAP2_OBFF_WAKE 0x00080000 /* Re-use WAKE# for OBFF */ #define PCI_EXP_DEVCAP2_EE_PREFIX 0x00200000 /* End-End TLP Prefix */ +#define PCI_EXP_DEVCAP2_EE_PREFIX_MAX 0x00c00000 /* Max End-End TLP Prefixes */ #define PCI_EXP_DEVCTL2 0x28 /* Device Control 2 */ #define PCI_EXP_DEVCTL2_COMP_TIMEOUT 0x000f /* Completion Timeout Value */ #define PCI_EXP_DEVCTL2_COMP_TMOUT_DIS 0x0010 /* Completion Timeout Disable */ @@ -XXX,XX +XXX,XX @@ /* Same bits as above */ #define PCI_ERR_CAP 0x18 /* Advanced Error Capabilities & Ctrl*/ #define PCI_ERR_CAP_FEP(x) ((x) & 0x1f) /* First Error Pointer */ -#define PCI_ERR_CAP_ECRC_GENC 0x00000020 /* ECRC Generation Capable */ -#define PCI_ERR_CAP_ECRC_GENE 0x00000040 /* ECRC Generation Enable */ -#define PCI_ERR_CAP_ECRC_CHKC 0x00000080 /* ECRC Check Capable */ -#define PCI_ERR_CAP_ECRC_CHKE 0x00000100 /* ECRC Check Enable */ +#define PCI_ERR_CAP_ECRC_GENC 0x00000020 /* ECRC Generation Capable */ +#define PCI_ERR_CAP_ECRC_GENE 0x00000040 /* ECRC Generation Enable */ +#define PCI_ERR_CAP_ECRC_CHKC 0x00000080 /* ECRC Check Capable */ +#define PCI_ERR_CAP_ECRC_CHKE 0x00000100 /* ECRC Check Enable */ +#define PCI_ERR_CAP_PREFIX_LOG_PRESENT 0x00000800 /* TLP Prefix Log Present */ #define PCI_ERR_HEADER_LOG 0x1c /* Header Log Register (16 bytes) */ #define PCI_ERR_ROOT_COMMAND 0x2c /* Root Error Command */ #define PCI_ERR_ROOT_CMD_COR_EN 0x00000001 /* Correctable Err Reporting Enable */ @@ -XXX,XX +XXX,XX @@ #define PCI_ERR_ROOT_FATAL_RCV 0x00000040 /* Fatal Received */ #define PCI_ERR_ROOT_AER_IRQ 0xf8000000 /* Advanced Error Interrupt Message Number */ #define PCI_ERR_ROOT_ERR_SRC 0x34 /* Error Source Identification */ +#define PCI_ERR_PREFIX_LOG 0x38 /* TLP Prefix LOG Register (up to 16 bytes) */ /* Virtual Channel */ #define PCI_VC_PORT_CAP1 0x04 @@ -XXX,XX +XXX,XX @@ #define PCI_ACS_CTRL 0x06 /* ACS Control Register */ #define PCI_ACS_EGRESS_CTL_V 0x08 /* ACS Egress Control Vector */ -#define PCI_VSEC_HDR 4 /* extended cap - vendor-specific */ -#define PCI_VSEC_HDR_LEN_SHIFT 20 /* shift for length field */ - /* SATA capability */ #define PCI_SATA_REGS 4 /* SATA REGs specifier */ #define PCI_SATA_REGS_MASK 0xF /* location - BAR#/inline */ diff --git a/include/standard-headers/linux/virtio_pci.h b/include/standard-headers/linux/virtio_pci.h index XXXXXXX..XXXXXXX 100644 --- a/include/standard-headers/linux/virtio_pci.h +++ b/include/standard-headers/linux/virtio_pci.h @@ -XXX,XX +XXX,XX @@ #define VIRTIO_PCI_CAP_PCI_CFG 5 /* Additional shared memory capability */ #define VIRTIO_PCI_CAP_SHARED_MEMORY_CFG 8 +/* PCI vendor data configuration */ +#define VIRTIO_PCI_CAP_VENDOR_CFG 9 /* This is the PCI capability header: */ struct virtio_pci_cap { @@ -XXX,XX +XXX,XX @@ struct virtio_pci_cap { uint32_t length; /* Length of the structure, in bytes. */ }; +/* This is the PCI vendor data capability header: */ +struct virtio_pci_vndr_data { + uint8_t cap_vndr; /* Generic PCI field: PCI_CAP_ID_VNDR */ + uint8_t cap_next; /* Generic PCI field: next ptr. */ + uint8_t cap_len; /* Generic PCI field: capability length */ + uint8_t cfg_type; /* Identifies the structure. */ + uint16_t vendor_id; /* Identifies the vendor-specific format. */ + /* For Vendor Definition */ + /* Pads structure to a multiple of 4 bytes */ + /* Reads must not have side effects */ +}; + struct virtio_pci_cap64 { struct virtio_pci_cap cap; uint32_t offset_hi; /* Most sig 32 bits of offset */ diff --git a/linux-headers/asm-arm64/kvm.h b/linux-headers/asm-arm64/kvm.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/asm-arm64/kvm.h +++ b/linux-headers/asm-arm64/kvm.h @@ -XXX,XX +XXX,XX @@ #define KVM_COALESCED_MMIO_PAGE_OFFSET 1 #define KVM_DIRTY_LOG_PAGE_OFFSET 64 -#define KVM_REG_SIZE(id) \ - (1U << (((id) & KVM_REG_SIZE_MASK) >> KVM_REG_SIZE_SHIFT)) - struct kvm_regs { struct user_pt_regs regs; /* sp = sp_el0 */ diff --git a/linux-headers/asm-loongarch/kvm_para.h b/linux-headers/asm-loongarch/kvm_para.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/asm-loongarch/kvm_para.h +++ b/linux-headers/asm-loongarch/kvm_para.h @@ -XXX,XX +XXX,XX @@ #define KVM_FEATURE_STEAL_TIME 2 /* BIT 24 - 31 are features configurable by user space vmm */ #define KVM_FEATURE_VIRT_EXTIOI 24 +#define KVM_FEATURE_USER_HCALL 25 #endif /* _ASM_KVM_PARA_H */ diff --git a/linux-headers/asm-riscv/kvm.h b/linux-headers/asm-riscv/kvm.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/asm-riscv/kvm.h +++ b/linux-headers/asm-riscv/kvm.h @@ -XXX,XX +XXX,XX @@ enum KVM_RISCV_ISA_EXT_ID { KVM_RISCV_ISA_EXT_SSNPM, KVM_RISCV_ISA_EXT_SVADE, KVM_RISCV_ISA_EXT_SVADU, + KVM_RISCV_ISA_EXT_SVVPTC, + KVM_RISCV_ISA_EXT_ZABHA, + KVM_RISCV_ISA_EXT_ZICCRSE, KVM_RISCV_ISA_EXT_MAX, }; @@ -XXX,XX +XXX,XX @@ enum KVM_RISCV_SBI_EXT_ID { KVM_RISCV_SBI_EXT_VENDOR, KVM_RISCV_SBI_EXT_DBCN, KVM_RISCV_SBI_EXT_STA, + KVM_RISCV_SBI_EXT_SUSP, KVM_RISCV_SBI_EXT_MAX, }; @@ -XXX,XX +XXX,XX @@ struct kvm_riscv_sbi_sta { #define KVM_RISCV_TIMER_STATE_OFF 0 #define KVM_RISCV_TIMER_STATE_ON 1 -#define KVM_REG_SIZE(id) \ - (1U << (((id) & KVM_REG_SIZE_MASK) >> KVM_REG_SIZE_SHIFT)) - /* If you need to interpret the index values, here is the key: */ #define KVM_REG_RISCV_TYPE_MASK 0x00000000FF000000 #define KVM_REG_RISCV_TYPE_SHIFT 24 diff --git a/linux-headers/asm-x86/kvm.h b/linux-headers/asm-x86/kvm.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/asm-x86/kvm.h +++ b/linux-headers/asm-x86/kvm.h @@ -XXX,XX +XXX,XX @@ struct kvm_hyperv_eventfd { #define KVM_X86_SEV_VM 2 #define KVM_X86_SEV_ES_VM 3 #define KVM_X86_SNP_VM 4 +#define KVM_X86_TDX_VM 5 #endif /* _ASM_X86_KVM_H */ diff --git a/linux-headers/linux/iommufd.h b/linux-headers/linux/iommufd.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/linux/iommufd.h +++ b/linux-headers/linux/iommufd.h @@ -XXX,XX +XXX,XX @@ struct iommu_ioas_unmap { * ioctl(IOMMU_OPTION_HUGE_PAGES) * @IOMMU_OPTION_RLIMIT_MODE: * Change how RLIMIT_MEMLOCK accounting works. The caller must have privilege - * to invoke this. Value 0 (default) is user based accouting, 1 uses process + * to invoke this. Value 0 (default) is user based accounting, 1 uses process * based accounting. Global option, object_id must be 0 * @IOMMU_OPTION_HUGE_PAGES: * Value 1 (default) allows contiguous pages to be combined when generating @@ -XXX,XX +XXX,XX @@ struct iommu_vfio_ioas { * @IOMMU_HWPT_ALLOC_PASID: Requests a domain that can be used with PASID. The * domain can be attached to any PASID on the device. * Any domain attached to the non-PASID part of the - * device must also be flaged, otherwise attaching a + * device must also be flagged, otherwise attaching a * PASID will blocked. * If IOMMU does not support PASID it will return * error (-EOPNOTSUPP). @@ -XXX,XX +XXX,XX @@ struct iommu_hw_info_vtd { * For the details of @idr, @iidr and @aidr, please refer to the chapters * from 6.3.1 to 6.3.6 in the SMMUv3 Spec. * - * User space should read the underlying ARM SMMUv3 hardware information for - * the list of supported features. + * This reports the raw HW capability, and not all bits are meaningful to be + * read by userspace. Only the following fields should be used: * - * Note that these values reflect the raw HW capability, without any insight if - * any required kernel driver support is present. Bits may be set indicating the - * HW has functionality that is lacking kernel software support, such as BTM. If - * a VMM is using this information to construct emulated copies of these - * registers it should only forward bits that it knows it can support. + * idr[0]: ST_LEVEL, TERM_MODEL, STALL_MODEL, TTENDIAN , CD2L, ASID16, TTF + * idr[1]: SIDSIZE, SSIDSIZE + * idr[3]: BBML, RIL + * idr[5]: VAX, GRAN64K, GRAN16K, GRAN4K * - * In future, presence of required kernel support will be indicated in flags. + * - S1P should be assumed to be true if a NESTED HWPT can be created + * - VFIO/iommufd only support platforms with COHACC, it should be assumed to be + * true. + * - ATS is a per-device property. If the VMM describes any devices as ATS + * capable in ACPI/DT it should set the corresponding idr. + * + * This list may expand in future (eg E0PD, AIE, PBHA, D128, DS etc). It is + * important that VMMs do not read bits outside the list to allow for + * compatibility with future kernels. Several features in the SMMUv3 + * architecture are not currently supported by the kernel for nesting: HTTU, + * BTM, MPAM and others. */ struct iommu_hw_info_arm_smmuv3 { __u32 flags; @@ -XXX,XX +XXX,XX @@ struct iommu_hwpt_vtd_s1_invalidate { }; /** - * struct iommu_viommu_arm_smmuv3_invalidate - ARM SMMUv3 cahce invalidation + * struct iommu_viommu_arm_smmuv3_invalidate - ARM SMMUv3 cache invalidation * (IOMMU_VIOMMU_INVALIDATE_DATA_ARM_SMMUV3) * @cmd: 128-bit cache invalidation command that runs in SMMU CMDQ. * Must be little-endian. @@ -XXX,XX +XXX,XX @@ enum iommu_hwpt_pgfault_perm { * @pasid: Process Address Space ID * @grpid: Page Request Group Index * @perm: Combination of enum iommu_hwpt_pgfault_perm + * @__reserved: Must be 0. * @addr: Fault address * @length: a hint of how much data the requestor is expecting to fetch. For * example, if the PRI initiator knows it is going to do a 10MB @@ -XXX,XX +XXX,XX @@ struct iommu_hwpt_pgfault { __u32 pasid; __u32 grpid; __u32 perm; - __u64 addr; + __u32 __reserved; + __aligned_u64 addr; __u32 length; __u32 cookie; }; diff --git a/linux-headers/linux/kvm.h b/linux-headers/linux/kvm.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/linux/kvm.h +++ b/linux-headers/linux/kvm.h @@ -XXX,XX +XXX,XX @@ struct kvm_ioeventfd { #define KVM_X86_DISABLE_EXITS_HLT (1 << 1) #define KVM_X86_DISABLE_EXITS_PAUSE (1 << 2) #define KVM_X86_DISABLE_EXITS_CSTATE (1 << 3) -#define KVM_X86_DISABLE_VALID_EXITS (KVM_X86_DISABLE_EXITS_MWAIT | \ - KVM_X86_DISABLE_EXITS_HLT | \ - KVM_X86_DISABLE_EXITS_PAUSE | \ - KVM_X86_DISABLE_EXITS_CSTATE) /* for KVM_ENABLE_CAP */ struct kvm_enable_cap { @@ -XXX,XX +XXX,XX @@ struct kvm_dirty_tlb { #define KVM_REG_SIZE_SHIFT 52 #define KVM_REG_SIZE_MASK 0x00f0000000000000ULL + +#define KVM_REG_SIZE(id) \ + (1U << (((id) & KVM_REG_SIZE_MASK) >> KVM_REG_SIZE_SHIFT)) + #define KVM_REG_SIZE_U8 0x0000000000000000ULL #define KVM_REG_SIZE_U16 0x0010000000000000ULL #define KVM_REG_SIZE_U32 0x0020000000000000ULL diff --git a/linux-headers/linux/stddef.h b/linux-headers/linux/stddef.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/linux/stddef.h +++ b/linux-headers/linux/stddef.h @@ -XXX,XX +XXX,XX @@ #define __always_inline __inline__ #endif +/* Not all C++ standards support type declarations inside an anonymous union */ +#ifndef __cplusplus +#define __struct_group_tag(TAG) TAG +#else +#define __struct_group_tag(TAG) +#endif + /** * __struct_group() - Create a mirrored named and anonyomous struct * @@ -XXX,XX +XXX,XX @@ * and size: one anonymous and one named. The former's members can be used * normally without sub-struct naming, and the latter can be used to * reason about the start, end, and size of the group of struct members. - * The named struct can also be explicitly tagged for layer reuse, as well - * as both having struct attributes appended. + * The named struct can also be explicitly tagged for layer reuse (C only), + * as well as both having struct attributes appended. */ #define __struct_group(TAG, NAME, ATTRS, MEMBERS...) \ union { \ struct { MEMBERS } ATTRS; \ - struct TAG { MEMBERS } ATTRS NAME; \ + struct __struct_group_tag(TAG) { MEMBERS } ATTRS NAME; \ } ATTRS #ifdef __cplusplus diff --git a/linux-headers/linux/vduse.h b/linux-headers/linux/vduse.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/linux/vduse.h +++ b/linux-headers/linux/vduse.h @@ -XXX,XX +XXX,XX @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */ #ifndef _VDUSE_H_ #define _VDUSE_H_ -- 2.48.1 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> At this moment ziccrse is a TCG always enabled named feature for priv_ver > 1.11 that has no exclusive flag. In the next patch we'll make the KVM driver turn ziccrse off if the extension isn't available in the host, and we'll need an ext_ziccrse flag in the CPU state for that. Create an exclusive flag for it like we do with other named features. As with any named features we already have, it won't be exposed to users. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Message-ID: <20250221153758.652078-3-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu_cfg.h | 3 +++ target/riscv/cpu.c | 3 ++- target/riscv/tcg/tcg-cpu.c | 2 ++ 3 files changed, 7 insertions(+), 1 deletion(-) diff --git a/target/riscv/cpu_cfg.h b/target/riscv/cpu_cfg.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_cfg.h +++ b/target/riscv/cpu_cfg.h @@ -XXX,XX +XXX,XX @@ struct RISCVCPUConfig { bool has_priv_1_12; bool has_priv_1_11; + /* Always enabled for TCG if has_priv_1_11 */ + bool ext_ziccrse; + /* Vendor-specific custom extensions */ bool ext_xtheadba; bool ext_xtheadbb; diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(ziccamoa, PRIV_VERSION_1_11_0, has_priv_1_11), ISA_EXT_DATA_ENTRY(ziccif, PRIV_VERSION_1_11_0, has_priv_1_11), ISA_EXT_DATA_ENTRY(zicclsm, PRIV_VERSION_1_11_0, has_priv_1_11), - ISA_EXT_DATA_ENTRY(ziccrse, PRIV_VERSION_1_11_0, has_priv_1_11), + ISA_EXT_DATA_ENTRY(ziccrse, PRIV_VERSION_1_11_0, ext_ziccrse), ISA_EXT_DATA_ENTRY(zicfilp, PRIV_VERSION_1_12_0, ext_zicfilp), ISA_EXT_DATA_ENTRY(zicfiss, PRIV_VERSION_1_13_0, ext_zicfiss), ISA_EXT_DATA_ENTRY(zicond, PRIV_VERSION_1_12_0, ext_zicond), @@ -XXX,XX +XXX,XX @@ const RISCVCPUMultiExtConfig riscv_cpu_named_features[] = { MULTI_EXT_CFG_BOOL("zic64b", ext_zic64b, true), MULTI_EXT_CFG_BOOL("ssstateen", ext_ssstateen, true), MULTI_EXT_CFG_BOOL("sha", ext_sha, true), + MULTI_EXT_CFG_BOOL("ziccrse", ext_ziccrse, true), { }, }; diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_update_named_features(RISCVCPU *cpu) cpu->cfg.ext_sha = riscv_has_ext(&cpu->env, RVH) && cpu->cfg.ext_ssstateen; + + cpu->cfg.ext_ziccrse = cpu->cfg.has_priv_1_11; } static void riscv_cpu_validate_g(RISCVCPU *cpu) -- 2.48.1 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Expose ziccrse, zabha and svvptc. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Message-ID: <20250221153758.652078-4-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/kvm/kvm-cpu.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/target/riscv/kvm/kvm-cpu.c b/target/riscv/kvm/kvm-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/kvm/kvm-cpu.c +++ b/target/riscv/kvm/kvm-cpu.c @@ -XXX,XX +XXX,XX @@ static void kvm_riscv_update_cpu_misa_ext(RISCVCPU *cpu, CPUState *cs) static KVMCPUConfig kvm_multi_ext_cfgs[] = { KVM_EXT_CFG("zicbom", ext_zicbom, KVM_RISCV_ISA_EXT_ZICBOM), KVM_EXT_CFG("zicboz", ext_zicboz, KVM_RISCV_ISA_EXT_ZICBOZ), + KVM_EXT_CFG("ziccrse", ext_ziccrse, KVM_RISCV_ISA_EXT_ZICCRSE), KVM_EXT_CFG("zicntr", ext_zicntr, KVM_RISCV_ISA_EXT_ZICNTR), KVM_EXT_CFG("zicond", ext_zicond, KVM_RISCV_ISA_EXT_ZICOND), KVM_EXT_CFG("zicsr", ext_zicsr, KVM_RISCV_ISA_EXT_ZICSR), @@ -XXX,XX +XXX,XX @@ static KVMCPUConfig kvm_multi_ext_cfgs[] = { KVM_EXT_CFG("zihpm", ext_zihpm, KVM_RISCV_ISA_EXT_ZIHPM), KVM_EXT_CFG("zimop", ext_zimop, KVM_RISCV_ISA_EXT_ZIMOP), KVM_EXT_CFG("zcmop", ext_zcmop, KVM_RISCV_ISA_EXT_ZCMOP), + KVM_EXT_CFG("zabha", ext_zabha, KVM_RISCV_ISA_EXT_ZABHA), KVM_EXT_CFG("zacas", ext_zacas, KVM_RISCV_ISA_EXT_ZACAS), KVM_EXT_CFG("zawrs", ext_zawrs, KVM_RISCV_ISA_EXT_ZAWRS), KVM_EXT_CFG("zfa", ext_zfa, KVM_RISCV_ISA_EXT_ZFA), @@ -XXX,XX +XXX,XX @@ static KVMCPUConfig kvm_multi_ext_cfgs[] = { KVM_EXT_CFG("svinval", ext_svinval, KVM_RISCV_ISA_EXT_SVINVAL), KVM_EXT_CFG("svnapot", ext_svnapot, KVM_RISCV_ISA_EXT_SVNAPOT), KVM_EXT_CFG("svpbmt", ext_svpbmt, KVM_RISCV_ISA_EXT_SVPBMT), + KVM_EXT_CFG("svvptc", ext_svvptc, KVM_RISCV_ISA_EXT_SVVPTC), }; static void *kvmconfig_get_cfg_addr(RISCVCPU *cpu, KVMCPUConfig *kvmcfg) -- 2.48.1 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> This header is incomplete, i.e. it is using definitions that are being supplied by the .c files that are including it. Adding this header into a fresh .c file will result in errors: /home/danielhb/work/qemu/hw/riscv/riscv-iommu.h:30:17: error: field ‘parent_obj’ has incomplete type 30 | DeviceState parent_obj; | ^~~~~~~~~~ /home/danielhb/work/qemu/hw/riscv/riscv-iommu.h:50:5: error: unknown type name ‘dma_addr_t’; did you mean ‘in_addr_t’? 50 | dma_addr_t cq_addr; /* Command queue base physical address */ | ^~~~~~~~~~ | in_addr_t (...) /home/danielhb/work/qemu/hw/riscv/riscv-iommu.h:62:5: error: unknown type name ‘QemuThread’; did you mean ‘GThread’? 62 | QemuThread core_proc; /* Background processing thread */ | ^~~~~~~~~~ | GThread /home/danielhb/work/qemu/hw/riscv/riscv-iommu.h:63:5: error: unknown type name ‘QemuCond’ 63 | QemuCond core_cond; /* Background processing wake up signal */ | ^~~~~~~~ /home/danielhb/work/qemu/hw/riscv/riscv-iommu.h:71:18: error: field ‘trap_as’ has incomplete type 71 | AddressSpace trap_as; | ^~~~~~~ /home/danielhb/work/qemu/hw/riscv/riscv-iommu.h:72:18: error: field ‘trap_mr’ has incomplete type 72 | MemoryRegion trap_mr; | ^~~~~~~ /home/danielhb/work/qemu/hw/riscv/riscv-iommu.h:80:18: error: field ‘regs_mr’ has incomplete type 80 | MemoryRegion regs_mr; | ^~~~~~~ Fix it by adding the missing headers for these definitions. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250224190826.1858473-2-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/hw/riscv/riscv-iommu.h b/hw/riscv/riscv-iommu.h index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.h +++ b/hw/riscv/riscv-iommu.h @@ -XXX,XX +XXX,XX @@ #define HW_RISCV_IOMMU_STATE_H #include "qom/object.h" +#include "hw/qdev-properties.h" +#include "system/dma.h" #include "hw/riscv/iommu.h" #include "hw/riscv/riscv-iommu-bits.h" -- 2.48.1 From: Tomasz Jeznach <tjeznach@rivosinc.com> Add the relevant HPM (High Performance Monitor) bits that we'll be using in the next patches. Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250224190826.1858473-3-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu-bits.h | 47 +++++++++++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+) diff --git a/hw/riscv/riscv-iommu-bits.h b/hw/riscv/riscv-iommu-bits.h index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu-bits.h +++ b/hw/riscv/riscv-iommu-bits.h @@ -XXX,XX +XXX,XX @@ struct riscv_iommu_pq_record { #define RISCV_IOMMU_CAP_ATS BIT_ULL(25) #define RISCV_IOMMU_CAP_T2GPA BIT_ULL(26) #define RISCV_IOMMU_CAP_IGS GENMASK_ULL(29, 28) +#define RISCV_IOMMU_CAP_HPM BIT_ULL(30) #define RISCV_IOMMU_CAP_DBG BIT_ULL(31) #define RISCV_IOMMU_CAP_PAS GENMASK_ULL(37, 32) #define RISCV_IOMMU_CAP_PD8 BIT_ULL(38) @@ -XXX,XX +XXX,XX @@ enum { RISCV_IOMMU_INTR_COUNT }; +#define RISCV_IOMMU_IOCOUNT_NUM 31 + +/* 5.19 Performance monitoring counter overflow status (32bits) */ +#define RISCV_IOMMU_REG_IOCOUNTOVF 0x0058 +#define RISCV_IOMMU_IOCOUNTOVF_CY BIT(0) + +/* 5.20 Performance monitoring counter inhibits (32bits) */ +#define RISCV_IOMMU_REG_IOCOUNTINH 0x005C +#define RISCV_IOMMU_IOCOUNTINH_CY BIT(0) + +/* 5.21 Performance monitoring cycles counter (64bits) */ +#define RISCV_IOMMU_REG_IOHPMCYCLES 0x0060 +#define RISCV_IOMMU_IOHPMCYCLES_COUNTER GENMASK_ULL(62, 0) +#define RISCV_IOMMU_IOHPMCYCLES_OVF BIT_ULL(63) + +/* 5.22 Performance monitoring event counters (31 * 64bits) */ +#define RISCV_IOMMU_REG_IOHPMCTR_BASE 0x0068 +#define RISCV_IOMMU_REG_IOHPMCTR(_n) \ + (RISCV_IOMMU_REG_IOHPMCTR_BASE + (_n * 0x8)) + +/* 5.23 Performance monitoring event selectors (31 * 64bits) */ +#define RISCV_IOMMU_REG_IOHPMEVT_BASE 0x0160 +#define RISCV_IOMMU_REG_IOHPMEVT(_n) \ + (RISCV_IOMMU_REG_IOHPMEVT_BASE + (_n * 0x8)) +#define RISCV_IOMMU_IOHPMEVT_EVENT_ID GENMASK_ULL(14, 0) +#define RISCV_IOMMU_IOHPMEVT_DMASK BIT_ULL(15) +#define RISCV_IOMMU_IOHPMEVT_PID_PSCID GENMASK_ULL(35, 16) +#define RISCV_IOMMU_IOHPMEVT_DID_GSCID GENMASK_ULL(59, 36) +#define RISCV_IOMMU_IOHPMEVT_PV_PSCV BIT_ULL(60) +#define RISCV_IOMMU_IOHPMEVT_DV_GSCV BIT_ULL(61) +#define RISCV_IOMMU_IOHPMEVT_IDT BIT_ULL(62) +#define RISCV_IOMMU_IOHPMEVT_OF BIT_ULL(63) + +enum RISCV_IOMMU_HPMEVENT_id { + RISCV_IOMMU_HPMEVENT_INVALID = 0, + RISCV_IOMMU_HPMEVENT_URQ = 1, + RISCV_IOMMU_HPMEVENT_TRQ = 2, + RISCV_IOMMU_HPMEVENT_ATS_RQ = 3, + RISCV_IOMMU_HPMEVENT_TLB_MISS = 4, + RISCV_IOMMU_HPMEVENT_DD_WALK = 5, + RISCV_IOMMU_HPMEVENT_PD_WALK = 6, + RISCV_IOMMU_HPMEVENT_S_VS_WALKS = 7, + RISCV_IOMMU_HPMEVENT_G_WALKS = 8, + RISCV_IOMMU_HPMEVENT_MAX = 9 +}; + /* 5.24 Translation request IOVA (64bits) */ #define RISCV_IOMMU_REG_TR_REQ_IOVA 0x0258 -- 2.48.1 From: Tomasz Jeznach <tjeznach@rivosinc.com> The HPM (Hardware Performance Monitor) support consists of almost 7 hundred lines that would be put on top of the base riscv-iommu emulation. To avoid clogging riscv-iommu.c, add a separated riscv-iommu-hpm file that will contain HPM specific code. We'll start by adding riscv_iommu_hpmcycle_read(), a helper that will be called during the riscv_iommu_mmio_read() callback. This change will have no effect on the existing emulation since we're not declaring HPM feature support. Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250224190826.1858473-4-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu-hpm.h | 27 +++++++++++++++++++ hw/riscv/riscv-iommu.h | 4 +++ hw/riscv/riscv-iommu-hpm.c | 54 ++++++++++++++++++++++++++++++++++++++ hw/riscv/riscv-iommu.c | 24 ++++++++++++++++- hw/riscv/meson.build | 3 ++- 5 files changed, 110 insertions(+), 2 deletions(-) create mode 100644 hw/riscv/riscv-iommu-hpm.h create mode 100644 hw/riscv/riscv-iommu-hpm.c diff --git a/hw/riscv/riscv-iommu-hpm.h b/hw/riscv/riscv-iommu-hpm.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/riscv/riscv-iommu-hpm.h @@ -XXX,XX +XXX,XX @@ +/* + * RISC-V IOMMU - Hardware Performance Monitor (HPM) helpers + * + * Copyright (C) 2022-2023 Rivos Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2 or later, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef HW_RISCV_IOMMU_HPM_H +#define HW_RISCV_IOMMU_HPM_H + +#include "qom/object.h" +#include "hw/riscv/riscv-iommu.h" + +uint64_t riscv_iommu_hpmcycle_read(RISCVIOMMUState *s); + +#endif diff --git a/hw/riscv/riscv-iommu.h b/hw/riscv/riscv-iommu.h index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.h +++ b/hw/riscv/riscv-iommu.h @@ -XXX,XX +XXX,XX @@ struct RISCVIOMMUState { QLIST_ENTRY(RISCVIOMMUState) iommus; QLIST_HEAD(, RISCVIOMMUSpace) spaces; + + /* HPM cycle counter */ + uint64_t hpmcycle_val; /* Current value of cycle register */ + uint64_t hpmcycle_prev; /* Saved value of QEMU_CLOCK_VIRTUAL clock */ }; void riscv_iommu_pci_setup_iommu(RISCVIOMMUState *iommu, PCIBus *bus, diff --git a/hw/riscv/riscv-iommu-hpm.c b/hw/riscv/riscv-iommu-hpm.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/riscv/riscv-iommu-hpm.c @@ -XXX,XX +XXX,XX @@ +/* + * RISC-V IOMMU - Hardware Performance Monitor (HPM) helpers + * + * Copyright (C) 2022-2023 Rivos Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2 or later, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "qemu/timer.h" +#include "cpu_bits.h" +#include "riscv-iommu-hpm.h" +#include "riscv-iommu.h" +#include "riscv-iommu-bits.h" +#include "trace.h" + +/* For now we assume IOMMU HPM frequency to be 1GHz so 1-cycle is of 1-ns. */ +static inline uint64_t get_cycles(void) +{ + return qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); +} + +uint64_t riscv_iommu_hpmcycle_read(RISCVIOMMUState *s) +{ + const uint64_t cycle = riscv_iommu_reg_get64( + s, RISCV_IOMMU_REG_IOHPMCYCLES); + const uint32_t inhibit = riscv_iommu_reg_get32( + s, RISCV_IOMMU_REG_IOCOUNTINH); + const uint64_t ctr_prev = s->hpmcycle_prev; + const uint64_t ctr_val = s->hpmcycle_val; + + if (get_field(inhibit, RISCV_IOMMU_IOCOUNTINH_CY)) { + /* + * Counter should not increment if inhibit bit is set. We can't really + * stop the QEMU_CLOCK_VIRTUAL, so we just return the last updated + * counter value to indicate that counter was not incremented. + */ + return (ctr_val & RISCV_IOMMU_IOHPMCYCLES_COUNTER) | + (cycle & RISCV_IOMMU_IOHPMCYCLES_OVF); + } + + return (ctr_val + get_cycles() - ctr_prev) | + (cycle & RISCV_IOMMU_IOHPMCYCLES_OVF); +} diff --git a/hw/riscv/riscv-iommu.c b/hw/riscv/riscv-iommu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.c +++ b/hw/riscv/riscv-iommu.c @@ -XXX,XX +XXX,XX @@ #include "cpu_bits.h" #include "riscv-iommu.h" #include "riscv-iommu-bits.h" +#include "riscv-iommu-hpm.h" #include "trace.h" #define LIMIT_CACHE_CTX (1U << 7) @@ -XXX,XX +XXX,XX @@ static MemTxResult riscv_iommu_mmio_read(void *opaque, hwaddr addr, return MEMTX_ACCESS_ERROR; } - ptr = &s->regs_rw[addr]; + /* Compute cycle register value. */ + if ((addr & ~7) == RISCV_IOMMU_REG_IOHPMCYCLES) { + val = riscv_iommu_hpmcycle_read(s); + ptr = (uint8_t *)&val + (addr & 7); + } else if ((addr & ~3) == RISCV_IOMMU_REG_IOCOUNTOVF) { + /* + * Software can read RISCV_IOMMU_REG_IOCOUNTOVF before timer + * callback completes. In which case CY_OF bit in + * RISCV_IOMMU_IOHPMCYCLES_OVF would be 0. Here we take the + * CY_OF bit state from RISCV_IOMMU_REG_IOHPMCYCLES register as + * it's not dependent over the timer callback and is computed + * from cycle overflow. + */ + val = ldq_le_p(&s->regs_rw[addr]); + val |= (riscv_iommu_hpmcycle_read(s) & RISCV_IOMMU_IOHPMCYCLES_OVF) + ? RISCV_IOMMU_IOCOUNTOVF_CY + : 0; + ptr = (uint8_t *)&val + (addr & 3); + } else { + ptr = &s->regs_rw[addr]; + } + val = ldn_le_p(ptr, size); *data = val; diff --git a/hw/riscv/meson.build b/hw/riscv/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/meson.build +++ b/hw/riscv/meson.build @@ -XXX,XX +XXX,XX @@ riscv_ss.add(when: 'CONFIG_SIFIVE_U', if_true: files('sifive_u.c')) riscv_ss.add(when: 'CONFIG_SPIKE', if_true: files('spike.c')) riscv_ss.add(when: 'CONFIG_MICROCHIP_PFSOC', if_true: files('microchip_pfsoc.c')) riscv_ss.add(when: 'CONFIG_ACPI', if_true: files('virt-acpi-build.c')) -riscv_ss.add(when: 'CONFIG_RISCV_IOMMU', if_true: files('riscv-iommu.c', 'riscv-iommu-pci.c', 'riscv-iommu-sys.c')) +riscv_ss.add(when: 'CONFIG_RISCV_IOMMU', if_true: files( + 'riscv-iommu.c', 'riscv-iommu-pci.c', 'riscv-iommu-sys.c', 'riscv-iommu-hpm.c')) riscv_ss.add(when: 'CONFIG_MICROBLAZE_V', if_true: files('microblaze-v-generic.c')) hw_arch += {'riscv': riscv_ss} -- 2.48.1 From: Tomasz Jeznach <tjeznach@rivosinc.com> This function will increment a specific counter, generating an interrupt when an overflow occurs. Some extra changes in riscv-iommu.c were required to add this new helper in riscv-iommu-hpm.c: - RISCVIOMMUContext was moved to riscv-iommu.h, making it visible in riscv-iommu-hpm.c; - riscv_iommu_notify() is now public. No behavior change is made since HPM support is not being advertised yet. Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250224190826.1858473-5-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu-hpm.h | 2 + hw/riscv/riscv-iommu.h | 18 ++++++ hw/riscv/riscv-iommu-hpm.c | 114 +++++++++++++++++++++++++++++++++++++ hw/riscv/riscv-iommu.c | 43 +++++++++----- 4 files changed, 162 insertions(+), 15 deletions(-) diff --git a/hw/riscv/riscv-iommu-hpm.h b/hw/riscv/riscv-iommu-hpm.h index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu-hpm.h +++ b/hw/riscv/riscv-iommu-hpm.h @@ -XXX,XX +XXX,XX @@ #include "hw/riscv/riscv-iommu.h" uint64_t riscv_iommu_hpmcycle_read(RISCVIOMMUState *s); +void riscv_iommu_hpm_incr_ctr(RISCVIOMMUState *s, RISCVIOMMUContext *ctx, + unsigned event_id); #endif diff --git a/hw/riscv/riscv-iommu.h b/hw/riscv/riscv-iommu.h index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.h +++ b/hw/riscv/riscv-iommu.h @@ -XXX,XX +XXX,XX @@ struct RISCVIOMMUState { /* HPM cycle counter */ uint64_t hpmcycle_val; /* Current value of cycle register */ uint64_t hpmcycle_prev; /* Saved value of QEMU_CLOCK_VIRTUAL clock */ + + /* HPM event counters */ + GHashTable *hpm_event_ctr_map; /* Mapping of events to counters */ }; void riscv_iommu_pci_setup_iommu(RISCVIOMMUState *iommu, PCIBus *bus, Error **errp); void riscv_iommu_set_cap_igs(RISCVIOMMUState *s, riscv_iommu_igs_mode mode); void riscv_iommu_reset(RISCVIOMMUState *s); +void riscv_iommu_notify(RISCVIOMMUState *s, int vec_type); + +typedef struct RISCVIOMMUContext RISCVIOMMUContext; +/* Device translation context state. */ +struct RISCVIOMMUContext { + uint64_t devid:24; /* Requester Id, AKA device_id */ + uint64_t process_id:20; /* Process ID. PASID for PCIe */ + uint64_t tc; /* Translation Control */ + uint64_t ta; /* Translation Attributes */ + uint64_t satp; /* S-Stage address translation and protection */ + uint64_t gatp; /* G-Stage address translation and protection */ + uint64_t msi_addr_mask; /* MSI filtering - address mask */ + uint64_t msi_addr_pattern; /* MSI filtering - address pattern */ + uint64_t msiptp; /* MSI redirection page table pointer */ +}; /* private helpers */ diff --git a/hw/riscv/riscv-iommu-hpm.c b/hw/riscv/riscv-iommu-hpm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu-hpm.c +++ b/hw/riscv/riscv-iommu-hpm.c @@ -XXX,XX +XXX,XX @@ uint64_t riscv_iommu_hpmcycle_read(RISCVIOMMUState *s) return (ctr_val + get_cycles() - ctr_prev) | (cycle & RISCV_IOMMU_IOHPMCYCLES_OVF); } + +static void hpm_incr_ctr(RISCVIOMMUState *s, uint32_t ctr_idx) +{ + const uint32_t off = ctr_idx << 3; + uint64_t cntr_val; + + cntr_val = ldq_le_p(&s->regs_rw[RISCV_IOMMU_REG_IOHPMCTR_BASE + off]); + stq_le_p(&s->regs_rw[RISCV_IOMMU_REG_IOHPMCTR_BASE + off], cntr_val + 1); + + /* Handle the overflow scenario. */ + if (cntr_val == UINT64_MAX) { + /* + * Generate interrupt only if OF bit is clear. +1 to offset the cycle + * register OF bit. + */ + const uint32_t ovf = + riscv_iommu_reg_mod32(s, RISCV_IOMMU_REG_IOCOUNTOVF, + BIT(ctr_idx + 1), 0); + if (!get_field(ovf, BIT(ctr_idx + 1))) { + riscv_iommu_reg_mod64(s, + RISCV_IOMMU_REG_IOHPMEVT_BASE + off, + RISCV_IOMMU_IOHPMEVT_OF, + 0); + riscv_iommu_notify(s, RISCV_IOMMU_INTR_PM); + } + } +} + +void riscv_iommu_hpm_incr_ctr(RISCVIOMMUState *s, RISCVIOMMUContext *ctx, + unsigned event_id) +{ + const uint32_t inhibit = riscv_iommu_reg_get32( + s, RISCV_IOMMU_REG_IOCOUNTINH); + uint32_t did_gscid; + uint32_t pid_pscid; + uint32_t ctr_idx; + gpointer value; + uint32_t ctrs; + uint64_t evt; + + if (!(s->cap & RISCV_IOMMU_CAP_HPM)) { + return; + } + + value = g_hash_table_lookup(s->hpm_event_ctr_map, + GUINT_TO_POINTER(event_id)); + if (value == NULL) { + return; + } + + for (ctrs = GPOINTER_TO_UINT(value); ctrs != 0; ctrs &= ctrs - 1) { + ctr_idx = ctz32(ctrs); + if (get_field(inhibit, BIT(ctr_idx + 1))) { + continue; + } + + evt = riscv_iommu_reg_get64(s, + RISCV_IOMMU_REG_IOHPMEVT_BASE + (ctr_idx << 3)); + + /* + * It's quite possible that event ID has been changed in counter + * but hashtable hasn't been updated yet. We don't want to increment + * counter for the old event ID. + */ + if (event_id != get_field(evt, RISCV_IOMMU_IOHPMEVT_EVENT_ID)) { + continue; + } + + if (get_field(evt, RISCV_IOMMU_IOHPMEVT_IDT)) { + did_gscid = get_field(ctx->gatp, RISCV_IOMMU_DC_IOHGATP_GSCID); + pid_pscid = get_field(ctx->ta, RISCV_IOMMU_DC_TA_PSCID); + } else { + did_gscid = ctx->devid; + pid_pscid = ctx->process_id; + } + + if (get_field(evt, RISCV_IOMMU_IOHPMEVT_PV_PSCV)) { + /* + * If the transaction does not have a valid process_id, counter + * increments if device_id matches DID_GSCID. If the transaction + * has a valid process_id, counter increments if device_id + * matches DID_GSCID and process_id matches PID_PSCID. See + * IOMMU Specification, Chapter 5.23. Performance-monitoring + * event selector. + */ + if (ctx->process_id && + get_field(evt, RISCV_IOMMU_IOHPMEVT_PID_PSCID) != pid_pscid) { + continue; + } + } + + if (get_field(evt, RISCV_IOMMU_IOHPMEVT_DV_GSCV)) { + uint32_t mask = ~0; + + if (get_field(evt, RISCV_IOMMU_IOHPMEVT_DMASK)) { + /* + * 1001 1011 mask = GSCID + * 0000 0111 mask = mask ^ (mask + 1) + * 1111 1000 mask = ~mask; + */ + mask = get_field(evt, RISCV_IOMMU_IOHPMEVT_DID_GSCID); + mask = mask ^ (mask + 1); + mask = ~mask; + } + + if ((get_field(evt, RISCV_IOMMU_IOHPMEVT_DID_GSCID) & mask) != + (did_gscid & mask)) { + continue; + } + } + + hpm_incr_ctr(s, ctr_idx); + } +} diff --git a/hw/riscv/riscv-iommu.c b/hw/riscv/riscv-iommu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.c +++ b/hw/riscv/riscv-iommu.c @@ -XXX,XX +XXX,XX @@ #define PPN_PHYS(ppn) ((ppn) << TARGET_PAGE_BITS) #define PPN_DOWN(phy) ((phy) >> TARGET_PAGE_BITS) -typedef struct RISCVIOMMUContext RISCVIOMMUContext; typedef struct RISCVIOMMUEntry RISCVIOMMUEntry; /* Device assigned I/O address space */ @@ -XXX,XX +XXX,XX @@ struct RISCVIOMMUSpace { QLIST_ENTRY(RISCVIOMMUSpace) list; }; -/* Device translation context state. */ -struct RISCVIOMMUContext { - uint64_t devid:24; /* Requester Id, AKA device_id */ - uint64_t process_id:20; /* Process ID. PASID for PCIe */ - uint64_t tc; /* Translation Control */ - uint64_t ta; /* Translation Attributes */ - uint64_t satp; /* S-Stage address translation and protection */ - uint64_t gatp; /* G-Stage address translation and protection */ - uint64_t msi_addr_mask; /* MSI filtering - address mask */ - uint64_t msi_addr_pattern; /* MSI filtering - address pattern */ - uint64_t msiptp; /* MSI redirection page table pointer */ -}; - typedef enum RISCVIOMMUTransTag { RISCV_IOMMU_TRANS_TAG_BY, /* Bypass */ RISCV_IOMMU_TRANS_TAG_SS, /* Single Stage */ @@ -XXX,XX +XXX,XX @@ static uint8_t riscv_iommu_get_icvec_vector(uint32_t icvec, uint32_t vec_type) } } -static void riscv_iommu_notify(RISCVIOMMUState *s, int vec_type) +void riscv_iommu_notify(RISCVIOMMUState *s, int vec_type) { uint32_t ipsr, icvec, vector; @@ -XXX,XX +XXX,XX @@ static int riscv_iommu_spa_fetch(RISCVIOMMUState *s, RISCVIOMMUContext *ctx, } } + + if (pass == S_STAGE) { + riscv_iommu_hpm_incr_ctr(s, ctx, RISCV_IOMMU_HPMEVENT_S_VS_WALKS); + } else { + riscv_iommu_hpm_incr_ctr(s, ctx, RISCV_IOMMU_HPMEVENT_G_WALKS); + } + /* Read page table entry */ if (sc[pass].ptesize == 4) { uint32_t pte32 = 0; @@ -XXX,XX +XXX,XX @@ static int riscv_iommu_ctx_fetch(RISCVIOMMUState *s, RISCVIOMMUContext *ctx) /* Device directory tree walk */ for (; depth-- > 0; ) { + riscv_iommu_hpm_incr_ctr(s, ctx, RISCV_IOMMU_HPMEVENT_DD_WALK); /* * Select device id index bits based on device directory tree level * and device context format. @@ -XXX,XX +XXX,XX @@ static int riscv_iommu_ctx_fetch(RISCVIOMMUState *s, RISCVIOMMUContext *ctx) addr = PPN_PHYS(get_field(de, RISCV_IOMMU_DDTE_PPN)); } + riscv_iommu_hpm_incr_ctr(s, ctx, RISCV_IOMMU_HPMEVENT_DD_WALK); + /* index into device context entry page */ addr |= (ctx->devid * dc_len) & ~TARGET_PAGE_MASK; @@ -XXX,XX +XXX,XX @@ static int riscv_iommu_ctx_fetch(RISCVIOMMUState *s, RISCVIOMMUContext *ctx) } for (depth = mode - RISCV_IOMMU_DC_FSC_PDTP_MODE_PD8; depth-- > 0; ) { + riscv_iommu_hpm_incr_ctr(s, ctx, RISCV_IOMMU_HPMEVENT_PD_WALK); + /* * Select process id index bits based on process directory tree * level. See IOMMU Specification, 2.2. Process-Directory-Table. @@ -XXX,XX +XXX,XX @@ static int riscv_iommu_ctx_fetch(RISCVIOMMUState *s, RISCVIOMMUContext *ctx) addr = PPN_PHYS(get_field(de, RISCV_IOMMU_PC_FSC_PPN)); } + riscv_iommu_hpm_incr_ctr(s, ctx, RISCV_IOMMU_HPMEVENT_PD_WALK); + /* Leaf entry in PDT */ addr |= (ctx->process_id << 4) & ~TARGET_PAGE_MASK; if (dma_memory_read(s->target_as, addr, &dc.ta, sizeof(uint64_t) * 2, @@ -XXX,XX +XXX,XX @@ static int riscv_iommu_translate(RISCVIOMMUState *s, RISCVIOMMUContext *ctx, GHashTable *iot_cache; int fault; + riscv_iommu_hpm_incr_ctr(s, ctx, RISCV_IOMMU_HPMEVENT_URQ); + iot_cache = g_hash_table_ref(s->iot_cache); /* * TC[32] is reserved for custom extensions, used here to temporarily @@ -XXX,XX +XXX,XX @@ static int riscv_iommu_translate(RISCVIOMMUState *s, RISCVIOMMUContext *ctx, /* Check for ATS request. */ if (iotlb->perm == IOMMU_NONE) { + riscv_iommu_hpm_incr_ctr(s, ctx, RISCV_IOMMU_HPMEVENT_ATS_RQ); /* Check if ATS is disabled. */ if (!(ctx->tc & RISCV_IOMMU_DC_TC_EN_ATS)) { enable_pri = false; @@ -XXX,XX +XXX,XX @@ static int riscv_iommu_translate(RISCVIOMMUState *s, RISCVIOMMUContext *ctx, goto done; } + riscv_iommu_hpm_incr_ctr(s, ctx, RISCV_IOMMU_HPMEVENT_TLB_MISS); + /* Translate using device directory / page table information. */ fault = riscv_iommu_spa_fetch(s, ctx, iotlb); @@ -XXX,XX +XXX,XX @@ static void riscv_iommu_realize(DeviceState *dev, Error **errp) memory_region_init_io(&s->trap_mr, OBJECT(dev), &riscv_iommu_trap_ops, s, "riscv-iommu-trap", ~0ULL); address_space_init(&s->trap_as, &s->trap_mr, "riscv-iommu-trap-as"); + + if (s->cap & RISCV_IOMMU_CAP_HPM) { + s->hpm_event_ctr_map = g_hash_table_new(g_direct_hash, g_direct_equal); + } } static void riscv_iommu_unrealize(DeviceState *dev) @@ -XXX,XX +XXX,XX @@ static void riscv_iommu_unrealize(DeviceState *dev) g_hash_table_unref(s->iot_cache); g_hash_table_unref(s->ctx_cache); + + if (s->cap & RISCV_IOMMU_CAP_HPM) { + g_hash_table_unref(s->hpm_event_ctr_map); + } } void riscv_iommu_reset(RISCVIOMMUState *s) -- 2.48.1 From: Tomasz Jeznach <tjeznach@rivosinc.com> The next HPM related changes requires the HPM overflow timer to be initialized by the riscv-iommu base emulation. Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250224190826.1858473-6-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu-hpm.h | 1 + hw/riscv/riscv-iommu.h | 2 ++ hw/riscv/riscv-iommu-hpm.c | 36 ++++++++++++++++++++++++++++++++++++ hw/riscv/riscv-iommu.c | 3 +++ 4 files changed, 42 insertions(+) diff --git a/hw/riscv/riscv-iommu-hpm.h b/hw/riscv/riscv-iommu-hpm.h index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu-hpm.h +++ b/hw/riscv/riscv-iommu-hpm.h @@ -XXX,XX +XXX,XX @@ uint64_t riscv_iommu_hpmcycle_read(RISCVIOMMUState *s); void riscv_iommu_hpm_incr_ctr(RISCVIOMMUState *s, RISCVIOMMUContext *ctx, unsigned event_id); +void riscv_iommu_hpm_timer_cb(void *priv); #endif diff --git a/hw/riscv/riscv-iommu.h b/hw/riscv/riscv-iommu.h index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.h +++ b/hw/riscv/riscv-iommu.h @@ -XXX,XX +XXX,XX @@ struct RISCVIOMMUState { QLIST_HEAD(, RISCVIOMMUSpace) spaces; /* HPM cycle counter */ + QEMUTimer *hpm_timer; uint64_t hpmcycle_val; /* Current value of cycle register */ uint64_t hpmcycle_prev; /* Saved value of QEMU_CLOCK_VIRTUAL clock */ + uint64_t irq_overflow_left; /* Value beyond INT64_MAX after overflow */ /* HPM event counters */ GHashTable *hpm_event_ctr_map; /* Mapping of events to counters */ diff --git a/hw/riscv/riscv-iommu-hpm.c b/hw/riscv/riscv-iommu-hpm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu-hpm.c +++ b/hw/riscv/riscv-iommu-hpm.c @@ -XXX,XX +XXX,XX @@ void riscv_iommu_hpm_incr_ctr(RISCVIOMMUState *s, RISCVIOMMUContext *ctx, hpm_incr_ctr(s, ctr_idx); } } + +/* Timer callback for cycle counter overflow. */ +void riscv_iommu_hpm_timer_cb(void *priv) +{ + RISCVIOMMUState *s = priv; + const uint32_t inhibit = riscv_iommu_reg_get32( + s, RISCV_IOMMU_REG_IOCOUNTINH); + uint32_t ovf; + + if (get_field(inhibit, RISCV_IOMMU_IOCOUNTINH_CY)) { + return; + } + + if (s->irq_overflow_left > 0) { + uint64_t irq_trigger_at = + qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + s->irq_overflow_left; + timer_mod_anticipate_ns(s->hpm_timer, irq_trigger_at); + s->irq_overflow_left = 0; + return; + } + + ovf = riscv_iommu_reg_get32(s, RISCV_IOMMU_REG_IOCOUNTOVF); + if (!get_field(ovf, RISCV_IOMMU_IOCOUNTOVF_CY)) { + /* + * We don't need to set hpmcycle_val to zero and update hpmcycle_prev to + * current clock value. The way we calculate iohpmcycs will overflow + * and return the correct value. This avoids the need to synchronize + * timer callback and write callback. + */ + riscv_iommu_reg_mod32(s, RISCV_IOMMU_REG_IOCOUNTOVF, + RISCV_IOMMU_IOCOUNTOVF_CY, 0); + riscv_iommu_reg_mod64(s, RISCV_IOMMU_REG_IOHPMCYCLES, + RISCV_IOMMU_IOHPMCYCLES_OVF, 0); + riscv_iommu_notify(s, RISCV_IOMMU_INTR_PM); + } +} diff --git a/hw/riscv/riscv-iommu.c b/hw/riscv/riscv-iommu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.c +++ b/hw/riscv/riscv-iommu.c @@ -XXX,XX +XXX,XX @@ static void riscv_iommu_realize(DeviceState *dev, Error **errp) address_space_init(&s->trap_as, &s->trap_mr, "riscv-iommu-trap-as"); if (s->cap & RISCV_IOMMU_CAP_HPM) { + s->hpm_timer = + timer_new_ns(QEMU_CLOCK_VIRTUAL, riscv_iommu_hpm_timer_cb, s); s->hpm_event_ctr_map = g_hash_table_new(g_direct_hash, g_direct_equal); } } @@ -XXX,XX +XXX,XX @@ static void riscv_iommu_unrealize(DeviceState *dev) if (s->cap & RISCV_IOMMU_CAP_HPM) { g_hash_table_unref(s->hpm_event_ctr_map); + timer_free(s->hpm_timer); } } -- 2.48.1 From: Tomasz Jeznach <tjeznach@rivosinc.com> RISCV_IOMMU_REG_IOCOUNTINH is done by riscv_iommu_process_iocntinh_cy(), which is called during riscv_iommu_mmio_write() callback via a new riscv_iommu_pricess_hpm_writes() helper. Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250224190826.1858473-7-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu-hpm.h | 1 + hw/riscv/riscv-iommu-hpm.c | 60 ++++++++++++++++++++++++++++++++++++++ hw/riscv/riscv-iommu.c | 38 ++++++++++++++++++++++++ 3 files changed, 99 insertions(+) diff --git a/hw/riscv/riscv-iommu-hpm.h b/hw/riscv/riscv-iommu-hpm.h index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu-hpm.h +++ b/hw/riscv/riscv-iommu-hpm.h @@ -XXX,XX +XXX,XX @@ uint64_t riscv_iommu_hpmcycle_read(RISCVIOMMUState *s); void riscv_iommu_hpm_incr_ctr(RISCVIOMMUState *s, RISCVIOMMUContext *ctx, unsigned event_id); void riscv_iommu_hpm_timer_cb(void *priv); +void riscv_iommu_process_iocntinh_cy(RISCVIOMMUState *s, bool prev_cy_inh); #endif diff --git a/hw/riscv/riscv-iommu-hpm.c b/hw/riscv/riscv-iommu-hpm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu-hpm.c +++ b/hw/riscv/riscv-iommu-hpm.c @@ -XXX,XX +XXX,XX @@ void riscv_iommu_hpm_timer_cb(void *priv) riscv_iommu_notify(s, RISCV_IOMMU_INTR_PM); } } + +static void hpm_setup_timer(RISCVIOMMUState *s, uint64_t value) +{ + const uint32_t inhibit = riscv_iommu_reg_get32( + s, RISCV_IOMMU_REG_IOCOUNTINH); + uint64_t overflow_at, overflow_ns; + + if (get_field(inhibit, RISCV_IOMMU_IOCOUNTINH_CY)) { + return; + } + + /* + * We are using INT64_MAX here instead to UINT64_MAX because cycle counter + * has 63-bit precision and INT64_MAX is the maximum it can store. + */ + if (value) { + overflow_ns = INT64_MAX - value + 1; + } else { + overflow_ns = INT64_MAX; + } + + overflow_at = (uint64_t)qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + overflow_ns; + + if (overflow_at > INT64_MAX) { + s->irq_overflow_left = overflow_at - INT64_MAX; + overflow_at = INT64_MAX; + } + + timer_mod_anticipate_ns(s->hpm_timer, overflow_at); +} + +/* Updates the internal cycle counter state when iocntinh:CY is changed. */ +void riscv_iommu_process_iocntinh_cy(RISCVIOMMUState *s, bool prev_cy_inh) +{ + const uint32_t inhibit = riscv_iommu_reg_get32( + s, RISCV_IOMMU_REG_IOCOUNTINH); + + /* We only need to process CY bit toggle. */ + if (!(inhibit ^ prev_cy_inh)) { + return; + } + + if (!(inhibit & RISCV_IOMMU_IOCOUNTINH_CY)) { + /* + * Cycle counter is enabled. Just start the timer again and update + * the clock snapshot value to point to the current time to make + * sure iohpmcycles read is correct. + */ + s->hpmcycle_prev = get_cycles(); + hpm_setup_timer(s, s->hpmcycle_val); + } else { + /* + * Cycle counter is disabled. Stop the timer and update the cycle + * counter to record the current value which is last programmed + * value + the cycles passed so far. + */ + s->hpmcycle_val = s->hpmcycle_val + (get_cycles() - s->hpmcycle_prev); + timer_del(s->hpm_timer); + } +} diff --git a/hw/riscv/riscv-iommu.c b/hw/riscv/riscv-iommu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.c +++ b/hw/riscv/riscv-iommu.c @@ -XXX,XX +XXX,XX @@ static void riscv_iommu_update_ipsr(RISCVIOMMUState *s, uint64_t data) riscv_iommu_reg_mod32(s, RISCV_IOMMU_REG_IPSR, ipsr_set, ipsr_clr); } +static void riscv_iommu_process_hpm_writes(RISCVIOMMUState *s, + uint32_t regb, + bool prev_cy_inh) +{ + switch (regb) { + case RISCV_IOMMU_REG_IOCOUNTINH: + riscv_iommu_process_iocntinh_cy(s, prev_cy_inh); + break; + + case RISCV_IOMMU_REG_IOHPMCYCLES: + case RISCV_IOMMU_REG_IOHPMCYCLES + 4: + /* not yet implemented */ + break; + + case RISCV_IOMMU_REG_IOHPMEVT_BASE ... + RISCV_IOMMU_REG_IOHPMEVT(RISCV_IOMMU_IOCOUNT_NUM) + 4: + /* not yet implemented */ + break; + } +} + /* * Write the resulting value of 'data' for the reg specified * by 'reg_addr', after considering read-only/read-write/write-clear @@ -XXX,XX +XXX,XX @@ static MemTxResult riscv_iommu_mmio_write(void *opaque, hwaddr addr, uint32_t regb = addr & ~3; uint32_t busy = 0; uint64_t val = 0; + bool cy_inh = false; if ((addr & (size - 1)) != 0) { /* Unsupported MMIO alignment or access size */ @@ -XXX,XX +XXX,XX @@ static MemTxResult riscv_iommu_mmio_write(void *opaque, hwaddr addr, busy = RISCV_IOMMU_TR_REQ_CTL_GO_BUSY; break; + case RISCV_IOMMU_REG_IOCOUNTINH: + if (addr != RISCV_IOMMU_REG_IOCOUNTINH) { + break; + } + /* Store previous value of CY bit. */ + cy_inh = !!(riscv_iommu_reg_get32(s, RISCV_IOMMU_REG_IOCOUNTINH) & + RISCV_IOMMU_IOCOUNTINH_CY); + break; + + default: break; } @@ -XXX,XX +XXX,XX @@ static MemTxResult riscv_iommu_mmio_write(void *opaque, hwaddr addr, stl_le_p(&s->regs_rw[regb], rw | busy); } + /* Process HPM writes and update any internal state if needed. */ + if (regb >= RISCV_IOMMU_REG_IOCOUNTOVF && + regb <= (RISCV_IOMMU_REG_IOHPMEVT(RISCV_IOMMU_IOCOUNT_NUM) + 4)) { + riscv_iommu_process_hpm_writes(s, regb, cy_inh); + } + if (process_fn) { process_fn(s); } -- 2.48.1 From: Tomasz Jeznach <tjeznach@rivosinc.com> RISCV_IOMMU_REG_IOHPMCYCLES writes are done by riscv_iommu_process_hpmcycle_write(), called by the mmio write callback via riscv_iommu_process_hpm_writes(). Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250224190826.1858473-8-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu-hpm.h | 1 + hw/riscv/riscv-iommu-hpm.c | 19 +++++++++++++++++++ hw/riscv/riscv-iommu.c | 2 +- 3 files changed, 21 insertions(+), 1 deletion(-) diff --git a/hw/riscv/riscv-iommu-hpm.h b/hw/riscv/riscv-iommu-hpm.h index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu-hpm.h +++ b/hw/riscv/riscv-iommu-hpm.h @@ -XXX,XX +XXX,XX @@ void riscv_iommu_hpm_incr_ctr(RISCVIOMMUState *s, RISCVIOMMUContext *ctx, unsigned event_id); void riscv_iommu_hpm_timer_cb(void *priv); void riscv_iommu_process_iocntinh_cy(RISCVIOMMUState *s, bool prev_cy_inh); +void riscv_iommu_process_hpmcycle_write(RISCVIOMMUState *s); #endif diff --git a/hw/riscv/riscv-iommu-hpm.c b/hw/riscv/riscv-iommu-hpm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu-hpm.c +++ b/hw/riscv/riscv-iommu-hpm.c @@ -XXX,XX +XXX,XX @@ void riscv_iommu_process_iocntinh_cy(RISCVIOMMUState *s, bool prev_cy_inh) timer_del(s->hpm_timer); } } + +void riscv_iommu_process_hpmcycle_write(RISCVIOMMUState *s) +{ + const uint64_t val = riscv_iommu_reg_get64(s, RISCV_IOMMU_REG_IOHPMCYCLES); + const uint32_t ovf = riscv_iommu_reg_get32(s, RISCV_IOMMU_REG_IOCOUNTOVF); + + /* + * Clear OF bit in IOCNTOVF if it's being cleared in IOHPMCYCLES register. + */ + if (get_field(ovf, RISCV_IOMMU_IOCOUNTOVF_CY) && + !get_field(val, RISCV_IOMMU_IOHPMCYCLES_OVF)) { + riscv_iommu_reg_mod32(s, RISCV_IOMMU_REG_IOCOUNTOVF, 0, + RISCV_IOMMU_IOCOUNTOVF_CY); + } + + s->hpmcycle_val = val & ~RISCV_IOMMU_IOHPMCYCLES_OVF; + s->hpmcycle_prev = get_cycles(); + hpm_setup_timer(s, s->hpmcycle_val); +} diff --git a/hw/riscv/riscv-iommu.c b/hw/riscv/riscv-iommu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.c +++ b/hw/riscv/riscv-iommu.c @@ -XXX,XX +XXX,XX @@ static void riscv_iommu_process_hpm_writes(RISCVIOMMUState *s, case RISCV_IOMMU_REG_IOHPMCYCLES: case RISCV_IOMMU_REG_IOHPMCYCLES + 4: - /* not yet implemented */ + riscv_iommu_process_hpmcycle_write(s); break; case RISCV_IOMMU_REG_IOHPMEVT_BASE ... -- 2.48.1 From: Tomasz Jeznach <tjeznach@rivosinc.com> To support hpm events mmio writes, done via riscv_iommu_process_hpmevt_write(), we're also adding the 'hpm-counters' IOMMU property that are used to determine the amount of counters available in the IOMMU. Note that everything we did so far didn't change any IOMMU behavior because we're still not advertising HPM capability to software. This will be done in the next patch. Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250224190826.1858473-9-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu-hpm.h | 1 + hw/riscv/riscv-iommu.h | 1 + hw/riscv/riscv-iommu-hpm.c | 88 ++++++++++++++++++++++++++++++++++++++ hw/riscv/riscv-iommu.c | 4 +- 4 files changed, 93 insertions(+), 1 deletion(-) diff --git a/hw/riscv/riscv-iommu-hpm.h b/hw/riscv/riscv-iommu-hpm.h index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu-hpm.h +++ b/hw/riscv/riscv-iommu-hpm.h @@ -XXX,XX +XXX,XX @@ void riscv_iommu_hpm_incr_ctr(RISCVIOMMUState *s, RISCVIOMMUContext *ctx, void riscv_iommu_hpm_timer_cb(void *priv); void riscv_iommu_process_iocntinh_cy(RISCVIOMMUState *s, bool prev_cy_inh); void riscv_iommu_process_hpmcycle_write(RISCVIOMMUState *s); +void riscv_iommu_process_hpmevt_write(RISCVIOMMUState *s, uint32_t evt_reg); #endif diff --git a/hw/riscv/riscv-iommu.h b/hw/riscv/riscv-iommu.h index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.h +++ b/hw/riscv/riscv-iommu.h @@ -XXX,XX +XXX,XX @@ struct RISCVIOMMUState { /* HPM event counters */ GHashTable *hpm_event_ctr_map; /* Mapping of events to counters */ + uint8_t hpm_cntrs; }; void riscv_iommu_pci_setup_iommu(RISCVIOMMUState *iommu, PCIBus *bus, diff --git a/hw/riscv/riscv-iommu-hpm.c b/hw/riscv/riscv-iommu-hpm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu-hpm.c +++ b/hw/riscv/riscv-iommu-hpm.c @@ -XXX,XX +XXX,XX @@ void riscv_iommu_process_hpmcycle_write(RISCVIOMMUState *s) s->hpmcycle_prev = get_cycles(); hpm_setup_timer(s, s->hpmcycle_val); } + +static inline bool check_valid_event_id(unsigned event_id) +{ + return event_id > RISCV_IOMMU_HPMEVENT_INVALID && + event_id < RISCV_IOMMU_HPMEVENT_MAX; +} + +static gboolean hpm_event_equal(gpointer key, gpointer value, gpointer udata) +{ + uint32_t *pair = udata; + + if (GPOINTER_TO_UINT(value) & (1 << pair[0])) { + pair[1] = GPOINTER_TO_UINT(key); + return true; + } + + return false; +} + +/* Caller must check ctr_idx against hpm_ctrs to see if its supported or not. */ +static void update_event_map(RISCVIOMMUState *s, uint64_t value, + uint32_t ctr_idx) +{ + unsigned event_id = get_field(value, RISCV_IOMMU_IOHPMEVT_EVENT_ID); + uint32_t pair[2] = { ctr_idx, RISCV_IOMMU_HPMEVENT_INVALID }; + uint32_t new_value = 1 << ctr_idx; + gpointer data; + + /* + * If EventID field is RISCV_IOMMU_HPMEVENT_INVALID + * remove the current mapping. + */ + if (event_id == RISCV_IOMMU_HPMEVENT_INVALID) { + data = g_hash_table_find(s->hpm_event_ctr_map, hpm_event_equal, pair); + + new_value = GPOINTER_TO_UINT(data) & ~(new_value); + if (new_value != 0) { + g_hash_table_replace(s->hpm_event_ctr_map, + GUINT_TO_POINTER(pair[1]), + GUINT_TO_POINTER(new_value)); + } else { + g_hash_table_remove(s->hpm_event_ctr_map, + GUINT_TO_POINTER(pair[1])); + } + + return; + } + + /* Update the counter mask if the event is already enabled. */ + if (g_hash_table_lookup_extended(s->hpm_event_ctr_map, + GUINT_TO_POINTER(event_id), + NULL, + &data)) { + new_value |= GPOINTER_TO_UINT(data); + } + + g_hash_table_insert(s->hpm_event_ctr_map, + GUINT_TO_POINTER(event_id), + GUINT_TO_POINTER(new_value)); +} + +void riscv_iommu_process_hpmevt_write(RISCVIOMMUState *s, uint32_t evt_reg) +{ + const uint32_t ctr_idx = (evt_reg - RISCV_IOMMU_REG_IOHPMEVT_BASE) >> 3; + const uint32_t ovf = riscv_iommu_reg_get32(s, RISCV_IOMMU_REG_IOCOUNTOVF); + uint64_t val = riscv_iommu_reg_get64(s, evt_reg); + + if (ctr_idx >= s->hpm_cntrs) { + return; + } + + /* Clear OF bit in IOCNTOVF if it's being cleared in IOHPMEVT register. */ + if (get_field(ovf, BIT(ctr_idx + 1)) && + !get_field(val, RISCV_IOMMU_IOHPMEVT_OF)) { + /* +1 to offset CYCLE register OF bit. */ + riscv_iommu_reg_mod32( + s, RISCV_IOMMU_REG_IOCOUNTOVF, 0, BIT(ctr_idx + 1)); + } + + if (!check_valid_event_id(get_field(val, RISCV_IOMMU_IOHPMEVT_EVENT_ID))) { + /* Reset EventID (WARL) field to invalid. */ + val = set_field(val, RISCV_IOMMU_IOHPMEVT_EVENT_ID, + RISCV_IOMMU_HPMEVENT_INVALID); + riscv_iommu_reg_set64(s, evt_reg, val); + } + + update_event_map(s, val, ctr_idx); +} diff --git a/hw/riscv/riscv-iommu.c b/hw/riscv/riscv-iommu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.c +++ b/hw/riscv/riscv-iommu.c @@ -XXX,XX +XXX,XX @@ static void riscv_iommu_process_hpm_writes(RISCVIOMMUState *s, case RISCV_IOMMU_REG_IOHPMEVT_BASE ... RISCV_IOMMU_REG_IOHPMEVT(RISCV_IOMMU_IOCOUNT_NUM) + 4: - /* not yet implemented */ + riscv_iommu_process_hpmevt_write(s, regb & ~7); break; } } @@ -XXX,XX +XXX,XX @@ static const Property riscv_iommu_properties[] = { DEFINE_PROP_BOOL("g-stage", RISCVIOMMUState, enable_g_stage, TRUE), DEFINE_PROP_LINK("downstream-mr", RISCVIOMMUState, target_mr, TYPE_MEMORY_REGION, MemoryRegion *), + DEFINE_PROP_UINT8("hpm-counters", RISCVIOMMUState, hpm_cntrs, + RISCV_IOMMU_IOCOUNT_NUM), }; static void riscv_iommu_class_init(ObjectClass *klass, void* data) -- 2.48.1 From: Tomasz Jeznach <tjeznach@rivosinc.com> Now that we have every piece in place we can advertise CAP_HTM to software, allowing any HPM aware driver to make use of the counters. HPM is enabled/disabled via the 'hpm-counters' attribute. Default value is 31, max value is also 31. Setting it to zero will disable HPM support. Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250224190826.1858473-10-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/hw/riscv/riscv-iommu.c b/hw/riscv/riscv-iommu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.c +++ b/hw/riscv/riscv-iommu.c @@ -XXX,XX +XXX,XX @@ static void riscv_iommu_realize(DeviceState *dev, Error **errp) RISCV_IOMMU_CAP_SV48X4 | RISCV_IOMMU_CAP_SV57X4; } + if (s->hpm_cntrs > 0) { + /* Clip number of HPM counters to maximum supported (31). */ + if (s->hpm_cntrs > RISCV_IOMMU_IOCOUNT_NUM) { + s->hpm_cntrs = RISCV_IOMMU_IOCOUNT_NUM; + } + /* Enable hardware performance monitor interface */ + s->cap |= RISCV_IOMMU_CAP_HPM; + } + /* Out-of-reset translation mode: OFF (DMA disabled) BARE (passthrough) */ s->ddtp = set_field(0, RISCV_IOMMU_DDTP_MODE, s->enable_off ? RISCV_IOMMU_DDTP_MODE_OFF : RISCV_IOMMU_DDTP_MODE_BARE); @@ -XXX,XX +XXX,XX @@ static void riscv_iommu_realize(DeviceState *dev, Error **errp) RISCV_IOMMU_TR_REQ_CTL_GO_BUSY); } + /* If HPM registers are enabled. */ + if (s->cap & RISCV_IOMMU_CAP_HPM) { + /* +1 for cycle counter bit. */ + stl_le_p(&s->regs_ro[RISCV_IOMMU_REG_IOCOUNTINH], + ~((2 << s->hpm_cntrs) - 1)); + stq_le_p(&s->regs_ro[RISCV_IOMMU_REG_IOHPMCYCLES], 0); + memset(&s->regs_ro[RISCV_IOMMU_REG_IOHPMCTR_BASE], + 0x00, s->hpm_cntrs * 8); + memset(&s->regs_ro[RISCV_IOMMU_REG_IOHPMEVT_BASE], + 0x00, s->hpm_cntrs * 8); + } + /* Memory region for downstream access, if specified. */ if (s->target_mr) { s->target_as = g_new0(AddressSpace, 1); -- 2.48.1 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Add a handful of trace events to allow for an easier time debugging the HPM feature. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250224190826.1858473-11-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu-hpm.c | 10 ++++++++++ hw/riscv/trace-events | 5 +++++ 2 files changed, 15 insertions(+) diff --git a/hw/riscv/riscv-iommu-hpm.c b/hw/riscv/riscv-iommu-hpm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu-hpm.c +++ b/hw/riscv/riscv-iommu-hpm.c @@ -XXX,XX +XXX,XX @@ uint64_t riscv_iommu_hpmcycle_read(RISCVIOMMUState *s) const uint64_t ctr_prev = s->hpmcycle_prev; const uint64_t ctr_val = s->hpmcycle_val; + trace_riscv_iommu_hpm_read(cycle, inhibit, ctr_prev, ctr_val); + if (get_field(inhibit, RISCV_IOMMU_IOCOUNTINH_CY)) { /* * Counter should not increment if inhibit bit is set. We can't really @@ -XXX,XX +XXX,XX @@ static void hpm_incr_ctr(RISCVIOMMUState *s, uint32_t ctr_idx) cntr_val = ldq_le_p(&s->regs_rw[RISCV_IOMMU_REG_IOHPMCTR_BASE + off]); stq_le_p(&s->regs_rw[RISCV_IOMMU_REG_IOHPMCTR_BASE + off], cntr_val + 1); + trace_riscv_iommu_hpm_incr_ctr(cntr_val); + /* Handle the overflow scenario. */ if (cntr_val == UINT64_MAX) { /* @@ -XXX,XX +XXX,XX @@ void riscv_iommu_process_iocntinh_cy(RISCVIOMMUState *s, bool prev_cy_inh) return; } + trace_riscv_iommu_hpm_iocntinh_cy(prev_cy_inh); + if (!(inhibit & RISCV_IOMMU_IOCOUNTINH_CY)) { /* * Cycle counter is enabled. Just start the timer again and update @@ -XXX,XX +XXX,XX @@ void riscv_iommu_process_hpmcycle_write(RISCVIOMMUState *s) const uint64_t val = riscv_iommu_reg_get64(s, RISCV_IOMMU_REG_IOHPMCYCLES); const uint32_t ovf = riscv_iommu_reg_get32(s, RISCV_IOMMU_REG_IOCOUNTOVF); + trace_riscv_iommu_hpm_cycle_write(ovf, val); + /* * Clear OF bit in IOCNTOVF if it's being cleared in IOHPMCYCLES register. */ @@ -XXX,XX +XXX,XX @@ void riscv_iommu_process_hpmevt_write(RISCVIOMMUState *s, uint32_t evt_reg) return; } + trace_riscv_iommu_hpm_evt_write(ctr_idx, ovf, val); + /* Clear OF bit in IOCNTOVF if it's being cleared in IOHPMEVT register. */ if (get_field(ovf, BIT(ctr_idx + 1)) && !get_field(val, RISCV_IOMMU_IOHPMEVT_OF)) { diff --git a/hw/riscv/trace-events b/hw/riscv/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/trace-events +++ b/hw/riscv/trace-events @@ -XXX,XX +XXX,XX @@ riscv_iommu_sys_irq_sent(uint32_t vector) "IRQ sent to vector %u" riscv_iommu_sys_msi_sent(uint32_t vector, uint64_t msi_addr, uint32_t msi_data, uint32_t result) "MSI sent to vector %u msi_addr 0x%"PRIx64" msi_data 0x%x result %u" riscv_iommu_sys_reset_hold(int reset_type) "reset type %d" riscv_iommu_pci_reset_hold(int reset_type) "reset type %d" +riscv_iommu_hpm_read(uint64_t cycle, uint32_t inhibit, uint64_t ctr_prev, uint64_t ctr_val) "cycle 0x%"PRIx64" inhibit 0x%x ctr_prev 0x%"PRIx64" ctr_val 0x%"PRIx64 +riscv_iommu_hpm_incr_ctr(uint64_t cntr_val) "cntr_val 0x%"PRIx64 +riscv_iommu_hpm_iocntinh_cy(bool prev_cy_inh) "prev_cy_inh %d" +riscv_iommu_hpm_cycle_write(uint32_t ovf, uint64_t val) "ovf 0x%x val 0x%"PRIx64 +riscv_iommu_hpm_evt_write(uint32_t ctr_idx, uint32_t ovf, uint64_t val) "ctr_idx 0x%x ovf 0x%x val 0x%"PRIx64 -- 2.48.1 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250224190826.1858473-12-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- docs/specs/riscv-iommu.rst | 2 ++ 1 file changed, 2 insertions(+) diff --git a/docs/specs/riscv-iommu.rst b/docs/specs/riscv-iommu.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/specs/riscv-iommu.rst +++ b/docs/specs/riscv-iommu.rst @@ -XXX,XX +XXX,XX @@ Several options are available to control the capabilities of the device, namely: - "off" (Out-of-reset translation mode: 'on' for DMA disabled, 'off' for 'BARE' (passthrough)) - "s-stage": enable s-stage support - "g-stage": enable g-stage support +- "hpm-counters": number of hardware performance counters available. Maximum value is 31. + Default value is 31. Use 0 (zero) to disable HPM support riscv-iommu-sys device ---------------------- -- 2.48.1 From: Quan Zhou <zhouquan@iscas.ac.cn> When the Sscofpmf/Svade/Svadu/Smnpm/Ssnpm exts is available expose it to the guest so that guest can use it. Signed-off-by: Quan Zhou <zhouquan@iscas.ac.cn> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <303616ccad2b5309768157b50d93b3e89fecc9cb.1740371468.git.zhouquan@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/kvm/kvm-cpu.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/target/riscv/kvm/kvm-cpu.c b/target/riscv/kvm/kvm-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/kvm/kvm-cpu.c +++ b/target/riscv/kvm/kvm-cpu.c @@ -XXX,XX +XXX,XX @@ static KVMCPUConfig kvm_multi_ext_cfgs[] = { KVM_EXT_CFG("zvksed", ext_zvksed, KVM_RISCV_ISA_EXT_ZVKSED), KVM_EXT_CFG("zvksh", ext_zvksh, KVM_RISCV_ISA_EXT_ZVKSH), KVM_EXT_CFG("zvkt", ext_zvkt, KVM_RISCV_ISA_EXT_ZVKT), + KVM_EXT_CFG("smnpm", ext_smnpm, KVM_RISCV_ISA_EXT_SMNPM), KVM_EXT_CFG("smstateen", ext_smstateen, KVM_RISCV_ISA_EXT_SMSTATEEN), KVM_EXT_CFG("ssaia", ext_ssaia, KVM_RISCV_ISA_EXT_SSAIA), + KVM_EXT_CFG("sscofpmf", ext_sscofpmf, KVM_RISCV_ISA_EXT_SSCOFPMF), + KVM_EXT_CFG("ssnpm", ext_ssnpm, KVM_RISCV_ISA_EXT_SSNPM), KVM_EXT_CFG("sstc", ext_sstc, KVM_RISCV_ISA_EXT_SSTC), + KVM_EXT_CFG("svade", ext_svade, KVM_RISCV_ISA_EXT_SVADE), + KVM_EXT_CFG("svadu", ext_svadu, KVM_RISCV_ISA_EXT_SVADU), KVM_EXT_CFG("svinval", ext_svinval, KVM_RISCV_ISA_EXT_SVINVAL), KVM_EXT_CFG("svnapot", ext_svnapot, KVM_RISCV_ISA_EXT_SVNAPOT), KVM_EXT_CFG("svpbmt", ext_svpbmt, KVM_RISCV_ISA_EXT_SVPBMT), -- 2.48.1 From: Andrea Bolognani <abologna@redhat.com> This should make no difference from the functional point of view and it's just preparation for upcoming changes. Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-ID: <20250127182924.103510-2-abologna@redhat.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- scripts/qemu-binfmt-conf.sh | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/scripts/qemu-binfmt-conf.sh b/scripts/qemu-binfmt-conf.sh index XXXXXXX..XXXXXXX 100755 --- a/scripts/qemu-binfmt-conf.sh +++ b/scripts/qemu-binfmt-conf.sh @@ -XXX,XX +XXX,XX @@ qemu_set_binfmts() { mask=$(eval echo \$${cpu}_mask) family=$(eval echo \$${cpu}_family) + target="$cpu" + if [ "$cpu" = "i486" ] ; then + target="i386" + fi + + qemu="$QEMU_PATH/qemu-$target$QEMU_SUFFIX" + if [ "$magic" = "" ] || [ "$mask" = "" ] || [ "$family" = "" ] ; then echo "INTERNAL ERROR: unknown cpu $cpu" 1>&2 continue fi - qemu="$QEMU_PATH/qemu-$cpu" - if [ "$cpu" = "i486" ] ; then - qemu="$QEMU_PATH/qemu-i386" + if [ "$host_family" = "$family" ] ; then + continue fi - qemu="$qemu$QEMU_SUFFIX" - if [ "$host_family" != "$family" ] ; then - $BINFMT_SET - fi + $BINFMT_SET done } -- 2.48.1 From: Andrea Bolognani <abologna@redhat.com> Right now information regarding the family each CPU type belongs to is recorded in two places: the large data table at the top of the script, and the qemu_host_family() function. We can make things better by mapping host CPU architecture to QEMU target in the few cases where the two don't already match and then using the data table to look up the family, same as we're already doing for the guest CPU architecture. Being able to reason in terms of QEMU target regardless of whether we're looking at the host or guest CPU architecture will come in handy to implement upcoming changes. A couple of entries are dropped in the process: BePC and Power Macintosh. I'm quite certain neither of those have ever been reported as CPU architectures by Linux. I believe many more of the entries that are carried forward could be dropped as well, but I don't have the same level of confidence there so I decided to play it safe just in case. Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-ID: <20250127182924.103510-3-abologna@redhat.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- scripts/qemu-binfmt-conf.sh | 44 +++++++++++++++++++++---------------- 1 file changed, 25 insertions(+), 19 deletions(-) diff --git a/scripts/qemu-binfmt-conf.sh b/scripts/qemu-binfmt-conf.sh index XXXXXXX..XXXXXXX 100755 --- a/scripts/qemu-binfmt-conf.sh +++ b/scripts/qemu-binfmt-conf.sh @@ -XXX,XX +XXX,XX @@ loongarch64_magic='\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x loongarch64_mask='\xff\xff\xff\xff\xff\xff\xff\xfc\x00\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff' loongarch64_family=loongarch -qemu_get_family() { - cpu=${HOST_ARCH:-$(uname -m)} +# Converts the name of a host CPU architecture to the corresponding QEMU +# target. +# +# FIXME: This can probably be simplified a lot by dropping most entries. +# Remember that the script is only used on Linux, so we only need to +# handle the strings Linux uses to report the host CPU architecture. +qemu_normalize() { + cpu="$1" case "$cpu" in - amd64|i386|i486|i586|i686|i86pc|BePC|x86_64) + i[3-6]86) echo "i386" ;; - mips*) - echo "mips" + amd64) + echo "x86_64" ;; - "Power Macintosh"|ppc64|powerpc|ppc) + powerpc) echo "ppc" ;; - ppc64el|ppc64le) - echo "ppcle" + ppc64el) + echo "ppc64le" ;; - arm|armel|armhf|arm64|armv[4-9]*l|aarch64) + armel|armhf|armv[4-9]*l) echo "arm" ;; - armeb|armv[4-9]*b|aarch64_be) + armv[4-9]*b) echo "armeb" ;; - sparc*) - echo "sparc" - ;; - riscv*) - echo "riscv" - ;; - loongarch*) - echo "loongarch" + arm64) + echo "aarch64" ;; *) echo "$cpu" @@ -XXX,XX +XXX,XX @@ EOF qemu_set_binfmts() { # probe cpu type - host_family=$(qemu_get_family) + host_cpu=$(qemu_normalize ${HOST_ARCH:-$(uname -m)}) + host_family=$(eval echo \$${host_cpu}_family) + + if [ "$host_family" = "" ] ; then + echo "INTERNAL ERROR: unknown host cpu $host_cpu" 1>&2 + exit 1 + fi # register the interpreter for each cpu except for the native one -- 2.48.1 From: Andrea Bolognani <abologna@redhat.com> Until now, the script has worked under the assumption that a host CPU can run binaries targeting any CPU in the same family. That's a fair enough assumption when it comes to running i386 binaries on x86_64, but it doesn't quite apply in the general case. For example, while riscv64 CPUs could theoretically run riscv32 applications natively, in practice there exist few (if any?) CPUs that implement the necessary silicon; moreover, even if you had one such CPU, your host OS would most likely not have enabled the necessary kernel bits. This new option gives distro packagers the ability to opt out of the assumption, likely on a per-architecture basis, and make things work out of the box for a larger fraction of their user base. As an interesting side effect, this makes it possible to enable execution of 64-bit binaries on 32-bit CPUs of the same family, which is a perfectly valid use case that apparently hadn't been considered until now. Link: https://src.fedoraproject.org/rpms/qemu/pull-request/72 Thanks: David Abdurachmanov <davidlt@rivosinc.com> Thanks: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-ID: <20250127182924.103510-4-abologna@redhat.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- scripts/qemu-binfmt-conf.sh | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) diff --git a/scripts/qemu-binfmt-conf.sh b/scripts/qemu-binfmt-conf.sh index XXXXXXX..XXXXXXX 100755 --- a/scripts/qemu-binfmt-conf.sh +++ b/scripts/qemu-binfmt-conf.sh @@ -XXX,XX +XXX,XX @@ Usage: qemu-binfmt-conf.sh [--qemu-path PATH][--debian][--systemd CPU] --persistent: if yes, the interpreter is loaded when binfmt is configured and remains in memory. All future uses are cloned from the open file. + --ignore-family: if yes, it is assumed that the host CPU (e.g. riscv64) + can't natively run programs targeting a CPU that is + part of the same family (e.g. riscv32). --preserve-argv0 preserve argv[0] To import templates with update-binfmts, use : @@ -XXX,XX +XXX,XX @@ qemu_set_binfmts() { fi if [ "$host_family" = "$family" ] ; then - continue + # When --ignore-family is used, we have to generate rules even + # for targets that are in the same family as the host CPU. The + # only exception is of course when the CPU types exactly match + if [ "$target" = "$host_cpu" ] || [ "$IGNORE_FAMILY" = "no" ] ; then + continue + fi fi $BINFMT_SET @@ -XXX,XX +XXX,XX @@ CREDENTIAL=no PERSISTENT=no PRESERVE_ARG0=no QEMU_SUFFIX="" +IGNORE_FAMILY=no _longopts="debian,systemd:,qemu-path:,qemu-suffix:,exportdir:,help,credential:,\ -persistent:,preserve-argv0:" -options=$(getopt -o ds:Q:S:e:hc:p:g:F: -l ${_longopts} -- "$@") +persistent:,preserve-argv0:,ignore-family:" +options=$(getopt -o ds:Q:S:e:hc:p:g:F:i: -l ${_longopts} -- "$@") eval set -- "$options" while true ; do @@ -XXX,XX +XXX,XX @@ while true ; do shift PRESERVE_ARG0="$1" ;; + -i|--ignore-family) + shift + IGNORE_FAMILY="$1" + ;; *) break ;; -- 2.48.1 From: Yong-Xuan Wang <yongxuan.wang@sifive.com> When the IMSIC is emulated in the kernel, the GPIO output lines to CPUs and aia_ireg_rmw_fn setting can be remove. In this case the IMSIC trigger CPU interrupts by KVM APIs, and the RMW of IREG is handled in kernel. This patch also move the code that claim the CPU interrupts to the beginning of IMSIC realization. This can avoid the unnecessary resource allocation before checking failed. Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20250224025722.3999-2-yongxuan.wang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/intc/riscv_imsic.c | 47 ++++++++++++++++++++++++------------------- 1 file changed, 26 insertions(+), 21 deletions(-) diff --git a/hw/intc/riscv_imsic.c b/hw/intc/riscv_imsic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/riscv_imsic.c +++ b/hw/intc/riscv_imsic.c @@ -XXX,XX +XXX,XX @@ static void riscv_imsic_realize(DeviceState *dev, Error **errp) CPUState *cpu = cpu_by_arch_id(imsic->hartid); CPURISCVState *env = cpu ? cpu_env(cpu) : NULL; + /* Claim the CPU interrupt to be triggered by this IMSIC */ + if (riscv_cpu_claim_interrupts(rcpu, + (imsic->mmode) ? MIP_MEIP : MIP_SEIP) < 0) { + error_setg(errp, "%s already claimed", + (imsic->mmode) ? "MEIP" : "SEIP"); + return; + } + if (!kvm_irqchip_in_kernel()) { + /* Create output IRQ lines */ + imsic->external_irqs = g_malloc(sizeof(qemu_irq) * imsic->num_pages); + qdev_init_gpio_out(dev, imsic->external_irqs, imsic->num_pages); + imsic->num_eistate = imsic->num_pages * imsic->num_irqs; imsic->eidelivery = g_new0(uint32_t, imsic->num_pages); imsic->eithreshold = g_new0(uint32_t, imsic->num_pages); @@ -XXX,XX +XXX,XX @@ static void riscv_imsic_realize(DeviceState *dev, Error **errp) IMSIC_MMIO_SIZE(imsic->num_pages)); sysbus_init_mmio(SYS_BUS_DEVICE(dev), &imsic->mmio); - /* Claim the CPU interrupt to be triggered by this IMSIC */ - if (riscv_cpu_claim_interrupts(rcpu, - (imsic->mmode) ? MIP_MEIP : MIP_SEIP) < 0) { - error_setg(errp, "%s already claimed", - (imsic->mmode) ? "MEIP" : "SEIP"); - return; - } - - /* Create output IRQ lines */ - imsic->external_irqs = g_malloc(sizeof(qemu_irq) * imsic->num_pages); - qdev_init_gpio_out(dev, imsic->external_irqs, imsic->num_pages); - /* Force select AIA feature and setup CSR read-modify-write callback */ if (env) { if (!imsic->mmode) { @@ -XXX,XX +XXX,XX @@ static void riscv_imsic_realize(DeviceState *dev, Error **errp) } else { rcpu->cfg.ext_smaia = true; } - riscv_cpu_set_aia_ireg_rmw_fn(env, (imsic->mmode) ? PRV_M : PRV_S, - riscv_imsic_rmw, imsic); + + if (!kvm_irqchip_in_kernel()) { + riscv_cpu_set_aia_ireg_rmw_fn(env, (imsic->mmode) ? PRV_M : PRV_S, + riscv_imsic_rmw, imsic); + } } msi_nonbroken = true; @@ -XXX,XX +XXX,XX @@ DeviceState *riscv_imsic_create(hwaddr addr, uint32_t hartid, bool mmode, sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, addr); - for (i = 0; i < num_pages; i++) { - if (!i) { - qdev_connect_gpio_out_named(dev, NULL, i, - qdev_get_gpio_in(DEVICE(cpu), + if (!kvm_irqchip_in_kernel()) { + for (i = 0; i < num_pages; i++) { + if (!i) { + qdev_connect_gpio_out_named(dev, NULL, i, + qdev_get_gpio_in(DEVICE(cpu), (mmode) ? IRQ_M_EXT : IRQ_S_EXT)); - } else { - qdev_connect_gpio_out_named(dev, NULL, i, - qdev_get_gpio_in(DEVICE(cpu), + } else { + qdev_connect_gpio_out_named(dev, NULL, i, + qdev_get_gpio_in(DEVICE(cpu), IRQ_LOCAL_MAX + i - 1)); + } } } -- 2.48.1 From: Yong-Xuan Wang <yongxuan.wang@sifive.com> When the APLIC is emulated in the kernel, the GPIO output lines to CPUs can be remove. In this case the APLIC trigger CPU interrupts by KVM APIs. This patch also move the code that claim the CPU interrupts to the beginning of APLIC realization. This can avoid the unnecessary resource allocation before checking failed. Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20250224025722.3999-3-yongxuan.wang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/intc/riscv_aplic.c | 49 +++++++++++++++++++++++-------------------- 1 file changed, 26 insertions(+), 23 deletions(-) diff --git a/hw/intc/riscv_aplic.c b/hw/intc/riscv_aplic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/riscv_aplic.c +++ b/hw/intc/riscv_aplic.c @@ -XXX,XX +XXX,XX @@ static void riscv_aplic_realize(DeviceState *dev, Error **errp) RISCVAPLICState *aplic = RISCV_APLIC(dev); if (riscv_use_emulated_aplic(aplic->msimode)) { + /* Create output IRQ lines for non-MSI mode */ + if (!aplic->msimode) { + /* Claim the CPU interrupt to be triggered by this APLIC */ + for (i = 0; i < aplic->num_harts; i++) { + RISCVCPU *cpu; + + cpu = RISCV_CPU(cpu_by_arch_id(aplic->hartid_base + i)); + if (riscv_cpu_claim_interrupts(cpu, + (aplic->mmode) ? MIP_MEIP : MIP_SEIP) < 0) { + error_report("%s already claimed", + (aplic->mmode) ? "MEIP" : "SEIP"); + exit(1); + } + } + + aplic->external_irqs = g_malloc(sizeof(qemu_irq) * + aplic->num_harts); + qdev_init_gpio_out(dev, aplic->external_irqs, aplic->num_harts); + } + aplic->bitfield_words = (aplic->num_irqs + 31) >> 5; aplic->sourcecfg = g_new0(uint32_t, aplic->num_irqs); aplic->state = g_new0(uint32_t, aplic->num_irqs); @@ -XXX,XX +XXX,XX @@ static void riscv_aplic_realize(DeviceState *dev, Error **errp) } } - /* Create output IRQ lines for non-MSI mode */ - if (!aplic->msimode) { - aplic->external_irqs = g_malloc(sizeof(qemu_irq) * aplic->num_harts); - qdev_init_gpio_out(dev, aplic->external_irqs, aplic->num_harts); - - /* Claim the CPU interrupt to be triggered by this APLIC */ - for (i = 0; i < aplic->num_harts; i++) { - RISCVCPU *cpu = RISCV_CPU(cpu_by_arch_id(aplic->hartid_base + i)); - if (riscv_cpu_claim_interrupts(cpu, - (aplic->mmode) ? MIP_MEIP : MIP_SEIP) < 0) { - error_report("%s already claimed", - (aplic->mmode) ? "MEIP" : "SEIP"); - exit(1); - } - } - } - msi_nonbroken = true; } @@ -XXX,XX +XXX,XX @@ DeviceState *riscv_aplic_create(hwaddr addr, hwaddr size, if (riscv_use_emulated_aplic(msimode)) { sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, addr); - } - if (!msimode) { - for (i = 0; i < num_harts; i++) { - CPUState *cpu = cpu_by_arch_id(hartid_base + i); + if (!msimode) { + for (i = 0; i < num_harts; i++) { + CPUState *cpu = cpu_by_arch_id(hartid_base + i); - qdev_connect_gpio_out_named(dev, NULL, i, - qdev_get_gpio_in(DEVICE(cpu), + qdev_connect_gpio_out_named(dev, NULL, i, + qdev_get_gpio_in(DEVICE(cpu), (mmode) ? IRQ_M_EXT : IRQ_S_EXT)); + } } } -- 2.48.1 From: Yong-Xuan Wang <yongxuan.wang@sifive.com> Let kvm_msicfgaddr use the same format with mmsicfgaddr and smsicfgaddr. Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20250224025722.3999-4-yongxuan.wang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/intc/riscv_aplic.c | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-) diff --git a/hw/intc/riscv_aplic.c b/hw/intc/riscv_aplic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/riscv_aplic.c +++ b/hw/intc/riscv_aplic.c @@ -XXX,XX +XXX,XX @@ void riscv_aplic_set_kvm_msicfgaddr(RISCVAPLICState *aplic, hwaddr addr) { #ifdef CONFIG_KVM if (riscv_use_emulated_aplic(aplic->msimode)) { + addr >>= APLIC_xMSICFGADDR_PPN_SHIFT; aplic->kvm_msicfgaddr = extract64(addr, 0, 32); - aplic->kvm_msicfgaddrH = extract64(addr, 32, 32); + aplic->kvm_msicfgaddrH = extract64(addr, 32, 32) & + APLIC_xMSICFGADDRH_VALID_MASK; } #endif } @@ -XXX,XX +XXX,XX @@ static void riscv_aplic_msi_send(RISCVAPLICState *aplic, } } - if (aplic->mmode) { - msicfgaddr = aplic_m->mmsicfgaddr; - msicfgaddrH = aplic_m->mmsicfgaddrH; + if (aplic->kvm_splitmode) { + msicfgaddr = aplic->kvm_msicfgaddr; + msicfgaddrH = ((uint64_t)aplic->kvm_msicfgaddrH << 32); } else { - msicfgaddr = aplic_m->smsicfgaddr; - msicfgaddrH = aplic_m->smsicfgaddrH; + if (aplic->mmode) { + msicfgaddr = aplic_m->mmsicfgaddr; + msicfgaddrH = aplic_m->mmsicfgaddrH; + } else { + msicfgaddr = aplic_m->smsicfgaddr; + msicfgaddrH = aplic_m->smsicfgaddrH; + } } lhxs = (msicfgaddrH >> APLIC_xMSICFGADDRH_LHXS_SHIFT) & @@ -XXX,XX +XXX,XX @@ static void riscv_aplic_msi_send(RISCVAPLICState *aplic, addr |= (uint64_t)(guest_idx & APLIC_xMSICFGADDR_PPN_HART(lhxs)); addr <<= APLIC_xMSICFGADDR_PPN_SHIFT; - if (aplic->kvm_splitmode) { - addr |= aplic->kvm_msicfgaddr; - addr |= ((uint64_t)aplic->kvm_msicfgaddrH << 32); - } - address_space_stl_le(&address_space_memory, addr, eiid, MEMTXATTRS_UNSPECIFIED, &result); if (result != MEMTX_OK) { -- 2.48.1 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Remove the !kvm_enabled() check in kvm_riscv_reset_vcpu() since the function is already being gated by kvm_enabled() in riscv_cpu_reset_hold(). Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250224123120.1644186-2-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/kvm/kvm-cpu.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/target/riscv/kvm/kvm-cpu.c b/target/riscv/kvm/kvm-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/kvm/kvm-cpu.c +++ b/target/riscv/kvm/kvm-cpu.c @@ -XXX,XX +XXX,XX @@ void kvm_riscv_reset_vcpu(RISCVCPU *cpu) CPURISCVState *env = &cpu->env; int i; - if (!kvm_enabled()) { - return; - } for (i = 0; i < 32; i++) { env->gpr[i] = 0; } -- 2.48.1 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> We're setting reset vals for KVM csrs during kvm_riscv_reset_vcpu(), but in no particular order and missing some of them (like env->mstatus). Create a helper to do that, unclogging reset_vcpu(), and initialize env->mstatus as well. Keep the regs in the same order they appear in struct kvm_riscv_csr from the KVM UAPI, similar to what kvm_riscv_(get|put)_regs_csr are doing. This will make a bit easier to add new KVM CSRs and to verify which values we're writing back to KVM during vcpu reset. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250224123120.1644186-3-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/kvm/kvm-cpu.c | 23 +++++++++++++++-------- 1 file changed, 15 insertions(+), 8 deletions(-) diff --git a/target/riscv/kvm/kvm-cpu.c b/target/riscv/kvm/kvm-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/kvm/kvm-cpu.c +++ b/target/riscv/kvm/kvm-cpu.c @@ -XXX,XX +XXX,XX @@ static int kvm_riscv_put_regs_core(CPUState *cs) return ret; } +static void kvm_riscv_reset_regs_csr(CPURISCVState *env) +{ + env->mstatus = 0; + env->mie = 0; + env->stvec = 0; + env->sscratch = 0; + env->sepc = 0; + env->scause = 0; + env->stval = 0; + env->mip = 0; + env->satp = 0; +} + static int kvm_riscv_get_regs_csr(CPUState *cs) { CPURISCVState *env = &RISCV_CPU(cs)->env; @@ -XXX,XX +XXX,XX @@ void kvm_riscv_reset_vcpu(RISCVCPU *cpu) env->pc = cpu->env.kernel_addr; env->gpr[10] = kvm_arch_vcpu_id(CPU(cpu)); /* a0 */ env->gpr[11] = cpu->env.fdt_addr; /* a1 */ - env->satp = 0; - env->mie = 0; - env->stvec = 0; - env->sscratch = 0; - env->sepc = 0; - env->scause = 0; - env->stval = 0; - env->mip = 0; + + kvm_riscv_reset_regs_csr(env); } void kvm_riscv_set_irq(RISCVCPU *cpu, int irq, int level) -- 2.48.1 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> We're missing scounteren and senvcfg CSRs, both already present in the KVM UAPI. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250224123120.1644186-4-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/kvm/kvm-cpu.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/target/riscv/kvm/kvm-cpu.c b/target/riscv/kvm/kvm-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/kvm/kvm-cpu.c +++ b/target/riscv/kvm/kvm-cpu.c @@ -XXX,XX +XXX,XX @@ static void kvm_riscv_reset_regs_csr(CPURISCVState *env) env->stval = 0; env->mip = 0; env->satp = 0; + env->scounteren = 0; + env->senvcfg = 0; } static int kvm_riscv_get_regs_csr(CPUState *cs) @@ -XXX,XX +XXX,XX @@ static int kvm_riscv_get_regs_csr(CPUState *cs) KVM_RISCV_GET_CSR(cs, env, stval, env->stval); KVM_RISCV_GET_CSR(cs, env, sip, env->mip); KVM_RISCV_GET_CSR(cs, env, satp, env->satp); + KVM_RISCV_GET_CSR(cs, env, scounteren, env->scounteren); + KVM_RISCV_GET_CSR(cs, env, senvcfg, env->senvcfg); return 0; } @@ -XXX,XX +XXX,XX @@ static int kvm_riscv_put_regs_csr(CPUState *cs) KVM_RISCV_SET_CSR(cs, env, stval, env->stval); KVM_RISCV_SET_CSR(cs, env, sip, env->mip); KVM_RISCV_SET_CSR(cs, env, satp, env->satp); + KVM_RISCV_SET_CSR(cs, env, scounteren, env->scounteren); + KVM_RISCV_SET_CSR(cs, env, senvcfg, env->senvcfg); return 0; } -- 2.48.1 From: Alistair Francis <alistair.francis@wdc.com> The following changes since commit f5a2438405d4ae8b62de7c9b39fac0b2155ee544: Merge tag 'pull-qapi-2026-05-21' of https://repo.or.cz/qemu/armbru into staging (2026-05-21 09:00:22 -0400) are available in the Git repository at: https://github.com/alistair23/qemu.git tags/pull-riscv-to-apply-20260522 for you to fetch changes up to b7d87fb10d53a918e9c4a3dfe1fb06ce42c52526: hw/riscv: riscv-iommu: Re-process command queue after clearing CMD_ILL (2026-05-22 09:59:21 +1000) ---------------------------------------------------------------- RISC-V PR for 11.1. * Remove spike as default machine * Deprecate the shakti_c machine * Set MISA.[C|X] based on the selected extensions * Update Maintainers for OpenSBI Firmware * Update OpenSBI to v1.8.1 * Avoid RISCVCPU copy in PMU FDT setup * A collection of specification compliance improvements * Fix Svnapot 64KB pages * Handle source overlap of vector widening reduction instructions * Check interrupt in SiFive UART after txctrl register is written * Fix medeleg[11] read-only zero bit for M-mode ECALL * Fix tail handling for vmv.s.x and vfmv.s.f * Update the local AIA interrupt mask * Add KVM support for Zicbop and BFloat16 extensions * Fix the IOMMU FSC SV32 capability check * Avoid caching PCI device IDs in the IOMMU * Implement Microchip mpfs ioscb PLLs and sysreg clock dividers * Remove the internal CPU riscv_cpu_* arrays * Fix IOCOUNTINH.CY toggle detection * Fix the read of pmpaddr(0-63) CSRs * Make hpmcounterh return the upper 32-bits * Minor fixes and enhancements of RISC-V AIA devices * Re-process IOMMU command queue after clearing CMD_ILL ---------------------------------------------------------------- Abhigyan Kumar (1): target/riscv: Fix medeleg[11] read-only zero bit for M-mode ECALL Alistair Francis (4): target/riscv: Remove spike as default machine target/riscv: Deprecate the shakti_c machine MAINTAINERS: Maintain OpenSBI Firmware target/riscv: Update the local interrupt mask Andrew Jones (1): hw/riscv/riscv-iommu: Fix Svnapot 64KB pages Anton Blanchard (1): target/riscv: rvv: Handle source overlap of vector widening reduction instructions Chengbo Gao (1): hw/riscv/riscv-iommu: Avoid caching PCI device IDs Daniel Henrique Barboza (16): roms/opensbi: Update to v1.8.1 target/riscv/cpu.c: add xlrbr isa_edata_arr[] entry target/riscv/cpu.c: fix smctr/ssctr isa_edata_arr[] order target/riscv: make riscv-qmp-cmds use isa_data_arr[] target/riscv/tcg: treat all exts equally in cpu_disable_priv_spec_isa_exts target/riscv/tcg: use only isa_edata_arr[] in cpu_cfg_ext_get_name() target/riscv/cpu.c: remove riscv_cpu_enable_named_feat() target/riscv: remove riscv_cpu_named_features[] target/riscv/tcg: use isa_edata_arr[] in riscv_cpu_update_misa_x() target/riscv/kvm: use isa_edata_arr[] for unavailable props target/riscv/tcg: use isa_edata_arr[] to enable max exts target/riscv/tcg: use cfg_offset as cpu_set_multi_ext cb opaque target/riscv: do not set defaults in cpu prop callback target/riscv/tcg: use isa_edata_arr[] to create user props target/riscv/cpu: remove riscv_cpu_* arrays target/riscv/csr.c: fix read of pmpaddr(0-63) CSRs Fangyu Yu (1): hw/riscv/riscv-iommu: Fix IOCOUNTINH.CY toggle detection Frank Chang (3): target/riscv: Update MISA.C for Zc* extensions target/riscv: Update MISA.X for non-standard extensions hw/char: Check interrupt after txctrl register is written Guenter Roeck (1): hw: misc: Implement Microchip mpfs ioscb PLLs and sysreg clock dividers Jay Chang (1): hw/riscv: riscv-iommu: Re-process command queue after clearing CMD_ILL Jim Shu (4): hw/intc: riscv_aplic: Fix level trigger IRQ in direct delivery mode hw/intc: riscv_aplic: Add reset API to APLIC hw/intc: riscv_imsic: Add reset API to IMSIC hw/intc: riscv_aplic: add trace events of APLIC read/write function Mohamed Ayman (1): riscv: virt: avoid RISCVCPU copy in PMU FDT setup Portia Stephens (1): target/riscv: Make hpmcounterh return the upper 32-bits Zishun Yi (9): target/riscv: Allow mseccfg access based on ext_zicfilp target/riscv: add Zvknha as an implied extension for Zvknhb target/riscv: Remove unconditional MENVCFG_CDE from mask target/riscv: Fix missing CDE check for scountinhibit target/riscv/pmp: Fix integer overflow in TOR and NA4 address computation target/riscv: Add mseccfg to VMStateDescription target/riscv: clear mseccfg on reset for all dependent extensions hw/riscv/riscv-iommu: fix FSC SV32 capability check hw/riscv/virt-acpi-build: Fix off-by-one error in RIMT ID mapping Zongmin Zhou (2): target/riscv/kvm: add KVM support for Zicbop extension target/riscv/kvm: Add BFloat16 extensions support chen.zhongyao@zte.com.cn (1): target/riscv: Fix tail handling for vmv.s.x and vfmv.s.f MAINTAINERS | 2 + docs/about/deprecated.rst | 21 +- docs/about/removed-features.rst | 14 ++ include/hw/misc/mchp_pfsoc_ioscb.h | 2 + target/riscv/cpu.h | 13 +- target/riscv/helper.h | 4 + hw/char/sifive_uart.c | 1 + hw/intc/riscv_aplic.c | 116 ++++++--- hw/intc/riscv_imsic.c | 19 ++ hw/misc/mchp_pfsoc_ioscb.c | 47 +++- hw/misc/mchp_pfsoc_sysreg.c | 13 + hw/riscv/riscv-iommu-hpm.c | 3 +- hw/riscv/riscv-iommu.c | 96 ++++++-- hw/riscv/shakti_c.c | 1 + hw/riscv/spike.c | 1 - hw/riscv/virt-acpi-build.c | 3 +- hw/riscv/virt.c | 4 +- target/riscv/cpu.c | 327 +++++++++---------------- target/riscv/csr.c | 36 ++- target/riscv/kvm/kvm-cpu.c | 62 +++-- target/riscv/machine.c | 20 ++ target/riscv/pmp.c | 4 +- target/riscv/riscv-qmp-cmds.c | 30 +-- target/riscv/tcg/tcg-cpu.c | 192 +++++++-------- target/riscv/vector_helper.c | 18 ++ target/riscv/insn_trans/trans_rvv.c.inc | 45 ++-- hw/intc/trace-events | 4 + pc-bios/opensbi-riscv32-generic-fw_dynamic.bin | Bin 268752 -> 270384 bytes pc-bios/opensbi-riscv64-generic-fw_dynamic.bin | Bin 273048 -> 275928 bytes roms/opensbi | 2 +- 30 files changed, 613 insertions(+), 487 deletions(-) From: Alistair Francis <alistair.francis@wdc.com> In QEMU 10.0 we deprecated the default spike machine, let's finally remove spike as the default and require users to specify the machine. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Chao Liu <chao.liu.zevorn@gmail.com> Message-ID: <20260430052218.771358-2-alistair.francis@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- docs/about/deprecated.rst | 18 ------------------ docs/about/removed-features.rst | 14 ++++++++++++++ hw/riscv/spike.c | 1 - 3 files changed, 14 insertions(+), 19 deletions(-) diff --git a/docs/about/deprecated.rst b/docs/about/deprecated.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/about/deprecated.rst +++ b/docs/about/deprecated.rst @@ -XXX,XX +XXX,XX @@ better reflects the way this property affects all random data within the device tree blob, not just the ``kaslr-seed`` node. -RISC-V default machine option (since 10.0) -'''''''''''''''''''''''''''''''''''''''''' - -RISC-V defines ``spike`` as the default machine if no machine option is -given in the command line. This happens because ``spike`` is the first -RISC-V machine implemented in QEMU and setting it as default was -convenient at that time. Now we have 7 riscv64 and 6 riscv32 machines -and having ``spike`` as a default is no longer justified. This default -will also promote situations where users think they're running ``virt`` -(the most used RISC-V machine type in 10.0) when in fact they're -running ``spike``. - -Removing the default machine option forces users to always set the machine -they want to use and avoids confusion. Existing users of the ``spike`` -machine must ensure that they're setting the ``spike`` machine in the -command line (``-M spike``). - - Backend options --------------- diff --git a/docs/about/removed-features.rst b/docs/about/removed-features.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/about/removed-features.rst +++ b/docs/about/removed-features.rst @@ -XXX,XX +XXX,XX @@ firmware is available to boot it. It can be replaced by the ``ast2700fc``, another multi-SoC machine based on the newer AST2700 SoCs which are excepted to receive better support in the future. +RISC-V default machine (removed in 11.1) +'''''''''''''''''''''''''''''''''''''''' + +RISC-V used to define ``spike`` as the default machine if no machine option +was given via the command line. This happend because ``spike`` was the first +RISC-V machine implemented in QEMU and setting it as default was +convenient at that time. Now we have 7 riscv64 and 6 riscv32 machines +and having ``spike`` as a default is no longer justified. + +The default machine option has been removed, forcing users to always set the +machine they want to use to avoid confusion. Existing users of the ``spike`` +machine must ensure that they're setting the ``spike`` machine in the +command line (``-M spike``). + linux-user mode CPUs -------------------- diff --git a/hw/riscv/spike.c b/hw/riscv/spike.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/spike.c +++ b/hw/riscv/spike.c @@ -XXX,XX +XXX,XX @@ static void spike_machine_class_init(ObjectClass *oc, const void *data) mc->desc = "RISC-V Spike board"; mc->init = spike_board_init; mc->max_cpus = SPIKE_CPUS_MAX; - mc->is_default = true; mc->default_cpu_type = TYPE_RISCV_CPU_BASE; mc->possible_cpu_arch_ids = riscv_numa_possible_cpu_arch_ids; mc->cpu_index_to_instance_props = riscv_numa_cpu_index_to_props; -- 2.53.0 From: Alistair Francis <alistair.francis@wdc.com> The RISC-V shakti_c machine hasn't had meaningful contributions since 2021 and is currently unmaintained. The machine is scheduled to be removed as it appears to have no users. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Chao Liu <chao.liu.zevorn@gmail.com> Message-ID: <20260430052218.771358-3-alistair.francis@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- docs/about/deprecated.rst | 7 +++++++ hw/riscv/shakti_c.c | 1 + 2 files changed, 8 insertions(+) diff --git a/docs/about/deprecated.rst b/docs/about/deprecated.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/about/deprecated.rst +++ b/docs/about/deprecated.rst @@ -XXX,XX +XXX,XX @@ deprecated; use the new name ``dtb-randomness`` instead. The new name better reflects the way this property affects all random data within the device tree blob, not just the ``kaslr-seed`` node. +RISC-V Shakti machine (since 11.1) +'''''''''''''''''''''''''''''''''' + +The RISC-V ``shakti_c`` machine hasn't had meaningful contributions since 2021 +and is currently unmaintained. The machine is scheduled to be removed as it +appears to have no users. + Backend options --------------- diff --git a/hw/riscv/shakti_c.c b/hw/riscv/shakti_c.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/shakti_c.c +++ b/hw/riscv/shakti_c.c @@ -XXX,XX +XXX,XX @@ static void shakti_c_machine_class_init(ObjectClass *klass, const void *data) mc->init = shakti_c_machine_state_init; mc->default_cpu_type = TYPE_RISCV_CPU_SHAKTI_C; mc->valid_cpu_types = valid_cpu_types; + mc->deprecation_reason = "Currently unmaintained with no known users"; mc->default_ram_id = "riscv.shakti.c.ram"; } -- 2.53.0 From: Frank Chang <frank.chang@sifive.com> MISA.C is set if the following extensions are selected: * Zca and not F. * Zca, Zcf and F (but not D) is specified (RV32 only). * Zca, Zcf and Zcd if D is specified (RV32 only). * Zca, Zcd if D is specified (RV64 only). Therefore, MISA.C must be set according to the Zc* extension rules. Warn the user if RVC is explicitly disabled but MISA.C is required by the rules above. Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Max Chou <max.chou@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260424050509.3935180-2-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 39 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_enable_implied_rules(RISCVCPU *cpu) } } +/* + * MISA.C is set if the following extensions are selected: + * - Zca and not F. + * - Zca, Zcf and F (but not D) is specified on RV32. + * - Zca, Zcf and Zcd if D is specified on RV32. + * - Zca, Zcd if D is specified on RV64. + */ +static void riscv_cpu_update_misa_c(RISCVCPU *cpu) +{ + CPURISCVState *env = &cpu->env; + bool set_misa_c = false; + + if (riscv_has_ext(env, RVC)) { + return; + } + + if (cpu->cfg.ext_zca && !riscv_has_ext(env, RVF)) { + set_misa_c = true; + } else if (riscv_cpu_mxl(env) == MXL_RV32 && + cpu->cfg.ext_zca && cpu->cfg.ext_zcf && + (riscv_has_ext(env, RVD) ? cpu->cfg.ext_zcd : + riscv_has_ext(env, RVF))) { + set_misa_c = true; + } else if (riscv_cpu_mxl(env) == MXL_RV64 && + cpu->cfg.ext_zca && cpu->cfg.ext_zcd) { + set_misa_c = true; + } + + if (set_misa_c) { + if (cpu_misa_ext_is_user_set(RVC)) { + warn_report("RVC mandated by Zca/Zcf/Zcd extensions"); + return; + } + + riscv_cpu_set_misa_ext(env, env->misa_ext | RVC); + } +} + void riscv_tcg_cpu_finalize_features(RISCVCPU *cpu, Error **errp) { CPURISCVState *env = &cpu->env; @@ -XXX,XX +XXX,XX @@ void riscv_tcg_cpu_finalize_features(RISCVCPU *cpu, Error **errp) riscv_cpu_init_implied_exts_rules(); riscv_cpu_enable_implied_rules(cpu); + riscv_cpu_update_misa_c(cpu); riscv_cpu_validate_misa_priv(env, &local_err); if (local_err != NULL) { -- 2.53.0 From: Frank Chang <frank.chang@sifive.com> MISA.X is set if there are any non-standard extensions. We should set MISA.X when any of the vendor extensions is enabled. Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Max Chou <max.chou@sifive.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260424050509.3935180-3-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 1 + target/riscv/tcg/tcg-cpu.c | 15 +++++++++++++++ 2 files changed, 16 insertions(+) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState CPURISCVState; #define RVH RV('H') #define RVG RV('G') #define RVB RV('B') +#define RVX RV('X') extern const uint32_t misa_bits[]; const char *riscv_get_misa_ext_name(uint32_t bit); diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_update_misa_c(RISCVCPU *cpu) } } +/* MISA.X is set when any of the non-standard extensions is enabled. */ +static void riscv_cpu_update_misa_x(RISCVCPU *cpu) +{ + CPURISCVState *env = &cpu->env; + const RISCVCPUMultiExtConfig *arr = riscv_cpu_vendor_exts; + + for (int i = 0; arr[i].name != NULL; i++) { + if (isa_ext_is_enabled(cpu, arr[i].offset)) { + riscv_cpu_set_misa_ext(env, env->misa_ext | RVX); + break; + } + } +} + void riscv_tcg_cpu_finalize_features(RISCVCPU *cpu, Error **errp) { CPURISCVState *env = &cpu->env; @@ -XXX,XX +XXX,XX @@ void riscv_tcg_cpu_finalize_features(RISCVCPU *cpu, Error **errp) riscv_cpu_init_implied_exts_rules(); riscv_cpu_enable_implied_rules(cpu); riscv_cpu_update_misa_c(cpu); + riscv_cpu_update_misa_x(cpu); riscv_cpu_validate_misa_priv(env, &local_err); if (local_err != NULL) { -- 2.53.0 From: Alistair Francis <alistair.francis@wdc.com> Mark the OpenSBI Firmware as maintained by me (Alistair Francis) and add Daniel Henrique Barboza as a reviewer. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20260506234243.1873782-1-alistair.francis@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- MAINTAINERS | 2 ++ 1 file changed, 2 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ S: Supported F: hw/i386/amd_iommu* OpenSBI Firmware +M: Alistair Francis <Alistair.Francis@wdc.com> +R: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> L: qemu-riscv@nongnu.org S: Supported F: pc-bios/opensbi-* -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Update OpenSBI and the pre-built opensbi32 and opensbi64 images to version 1.8.1. We're going for the intermediate/bug fix release 1.8.1 directly due to a PMP related fix that was impacting QEMU profile CPUs. Changelog for v1.8.1: * Typo fix in comments of sbi_hartindex_to_hartid() * Fix hart protection abstraction for platforms without PMP Changelog for v1.8 includes, among other things: - IPI device ratings - SiFive CLINT v2 support - SiFive PL2 cache controller driver - SiFive Extensible Cache (EC) driver - SiFive TMC0 based HSM driver - SiFive SMC0 based system suspend driver - MPXY RPMI mailbox driver for voltage service group - MPXY RPMI mailbox driver for device power service group - MPXY RPMI mailbox driver for performance service group Check out the full release log at [1] for more info. [1] https://github.com/riscv-software-src/opensbi/releases/tag/v1.8 Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260108160825.171794-1-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- .../opensbi-riscv32-generic-fw_dynamic.bin | Bin 268752 -> 270384 bytes .../opensbi-riscv64-generic-fw_dynamic.bin | Bin 273048 -> 275928 bytes roms/opensbi | 2 +- 3 files changed, 1 insertion(+), 1 deletion(-) diff --git a/pc-bios/opensbi-riscv32-generic-fw_dynamic.bin b/pc-bios/opensbi-riscv32-generic-fw_dynamic.bin index XXXXXXX..XXXXXXX 100644 Binary files a/pc-bios/opensbi-riscv32-generic-fw_dynamic.bin and b/pc-bios/opensbi-riscv32-generic-fw_dynamic.bin differ diff --git a/pc-bios/opensbi-riscv64-generic-fw_dynamic.bin b/pc-bios/opensbi-riscv64-generic-fw_dynamic.bin index XXXXXXX..XXXXXXX 100644 Binary files a/pc-bios/opensbi-riscv64-generic-fw_dynamic.bin and b/pc-bios/opensbi-riscv64-generic-fw_dynamic.bin differ diff --git a/roms/opensbi b/roms/opensbi index XXXXXXX..XXXXXXX 160000 --- a/roms/opensbi +++ b/roms/opensbi @@ -1 +1 @@ -Subproject commit a32a91069119e7a5aa31e6bc51d5e00860be3d80 +Subproject commit 74434f255873d74e56cc50aa762d1caf24c099f8 -- 2.53.0 From: Mohamed Ayman <mohamedaymanworkspace@gmail.com> Use a pointer to the hart instead of copying RISCVCPU when passing pmu_avail_ctrs to riscv_pmu_generate_fdt_node(). Signed-off-by: Mohamed Ayman <mohamedaymanworkspace@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260503180252.1122776-1-mohamedaymanworkspace@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_pmu(RISCVVirtState *s) { g_autofree char *pmu_name = g_strdup_printf("/pmu"); MachineState *ms = MACHINE(s); - RISCVCPU hart = s->soc[0].harts[0]; + RISCVCPU *hart = &s->soc[0].harts[0]; qemu_fdt_add_subnode(ms->fdt, pmu_name); qemu_fdt_setprop_string(ms->fdt, pmu_name, "compatible", "riscv,pmu"); - riscv_pmu_generate_fdt_node(ms->fdt, hart.pmu_avail_ctrs, pmu_name); + riscv_pmu_generate_fdt_node(ms->fdt, hart->pmu_avail_ctrs, pmu_name); } static void create_fdt_sockets(RISCVVirtState *s, -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> The Zicfilp extension adds the MLPE field to the mseccfg CSR. According to the RISC-V Privileged Specification, mseccfg exists if any extension that adds a field to it is implemented. Currently, the `have_mseccfg()` predicate function checks for Smepmp, Zkr, and Smmpm, but misses Zicfilp. As a result, if a CPU is configured with `zicfilp=true` but without the other extensions, accessing the mseccfg CSR will incorrectly raise an illegal instruction exception. This patch adds the missing check for `ext_zicfilp` to ensure the CSR is properly accessible when the Zicfilp extension is enabled. This issue was discovered and reported by SpecHunter, an AI-driven architecture specification analysis tool. Link: https://github.com/yizishun/rv-isa-sec/blob/master/output/riscv-isa-manual/pr-2561/qemu.txt Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Reviewed-by: Chao Liu <chao.liu.zevorn@gmail.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260511072705.3015986-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException have_mseccfg(CPURISCVState *env, int csrno) if (riscv_cpu_cfg(env)->ext_smmpm) { return RISCV_EXCP_NONE; } + if (riscv_cpu_cfg(env)->ext_zicfilp) { + return RISCV_EXCP_NONE; + } return RISCV_EXCP_ILLEGAL_INST; } -- 2.53.0 From: Andrew Jones <andrew.jones@oss.qualcomm.com> The Svnapot extension encodes a 64KB leaf PTE by setting PTE_N and storing bits [3:0] of the PPN as a NAPOT size indicator. The IOMMU model wasn't checking PTE_N and therefore was using the raw (NAPOT- encoded) PPN directly in the physical address, yielding an address 32 KB above the correct base. Fix both riscv_iommu_spa_fetch() and pdt_memory_read() by mirroring the Svnapot handling already present in target/riscv/cpu_helper.c: napot_bits = ctz64(ppn) + 1 /* 4 for 64KB */ napot_mask = (1 << napot_bits) - 1 /* 0xF */ phys_base = PPN_PHYS(ppn & ~napot_mask) page_offset = addr & (PPN_PHYS(napot_mask) | (TARGET_PAGE_SIZE - 1)) The spec only defines napot_bits == 4 (64KB); any other value is treated as a reserved encoding. This is a fix, rather than new feature support, because the spec says "IOMMU implementations must support the Svnapot standard extension for NAPOT Translation Contiguity." Fixes: 0c54acb8243d ("hw/riscv: add RISC-V IOMMU base emulation") Cc: qemu-stable@nongnu.org Signed-off-by: Andrew Jones <andrew.jones@oss.qualcomm.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Nutty Liu <nutty.liu@hotmail.com> Reviewed-by: Tomasz Jeznach <tjeznach@rivosinc.com> Message-ID: <20260508205129.377032-1-andrew.jones@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu.c | 44 ++++++++++++++++++++++++++++++++++++++---- 1 file changed, 40 insertions(+), 4 deletions(-) diff --git a/hw/riscv/riscv-iommu.c b/hw/riscv/riscv-iommu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.c +++ b/hw/riscv/riscv-iommu.c @@ -XXX,XX +XXX,XX @@ static bool riscv_iommu_msi_check(RISCVIOMMUState *s, RISCVIOMMUContext *ctx, return true; } +/* Returns the NAPOT page mask, or 0 for reserved encodings. */ +static hwaddr riscv_iommu_napot_page_mask(hwaddr ppn, hwaddr addr, hwaddr *out) +{ + int napot_bits = ctz64(ppn) + 1; + hwaddr napot_mask, page_mask; + + /* The spec only defines 64KB (napot_bits == 4) */ + if (napot_bits != 4) { + return 0; + } + + napot_mask = (1ULL << napot_bits) - 1; + page_mask = PPN_PHYS(napot_mask) | (TARGET_PAGE_SIZE - 1); + + *out = PPN_PHYS(ppn & ~napot_mask) | (addr & page_mask); + + return page_mask; +} + /* * RISCV IOMMU Address Translation Lookup - Page Table Walk * @@ -XXX,XX +XXX,XX @@ static int riscv_iommu_spa_fetch(RISCVIOMMUState *s, RISCVIOMMUContext *ctx, } else { /* Leaf PTE, translation completed. */ sc[pass].step = sc[pass].levels; - base = PPN_PHYS(ppn) | (addr & ((1ULL << va_skip) - 1)); - /* Update address mask based on smallest translation granularity */ - iotlb->addr_mask &= (1ULL << va_skip) - 1; + + if (pte & PTE_N) { + hwaddr mask = riscv_iommu_napot_page_mask(ppn, addr, &base); + + if (!mask) { + break; + } + iotlb->addr_mask &= mask; + } else { + base = PPN_PHYS(ppn) | (addr & ((1ULL << va_skip) - 1)); + /* Update address mask based on smallest translation granularity */ + iotlb->addr_mask &= (1ULL << va_skip) - 1; + } + /* Continue with S-Stage translation? */ if (pass && sc[0].step != sc[0].levels) { pass = S_STAGE; @@ -XXX,XX +XXX,XX @@ static MemTxResult pdt_memory_read(RISCVIOMMUState *s, return MEMTX_ACCESS_ERROR; /* Misaligned PPN */ } else { /* Leaf PTE, translation completed. */ - base = PPN_PHYS(ppn) | (addr & ((1ULL << va_skip) - 1)); + if (pte & PTE_N) { + if (!riscv_iommu_napot_page_mask(ppn, addr, &base)) { + return MEMTX_ACCESS_ERROR; + } + } else { + base = PPN_PHYS(ppn) | (addr & ((1ULL << va_skip) - 1)); + } break; } -- 2.53.0 From: Anton Blanchard <antonb@tenstorrent.com> Widening reductions read vs2 as a vector of SEW elements and vs1[0] as a scalar of 2*SEW. The ISA does not allow the same vector register to be read with different EEWs, so they must not overlap. vs1 is read as a scalar from element 0, so it is treated as a single vector register (independent of LMUL) when checking overlap. Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3208 Signed-off-by: Anton Blanchard <antonb@tenstorrent.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260417080328.31918-1-antonb@tenstorrent.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/insn_trans/trans_rvv.c.inc | 1 + 1 file changed, 1 insertion(+) diff --git a/target/riscv/insn_trans/trans_rvv.c.inc b/target/riscv/insn_trans/trans_rvv.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_rvv.c.inc +++ b/target/riscv/insn_trans/trans_rvv.c.inc @@ -XXX,XX +XXX,XX @@ GEN_OPIVV_TRANS(vredxor_vs, reduction_check) static bool reduction_widen_check(DisasContext *s, arg_rmrr *a) { return reduction_check(s, a) && (s->sew < MO_64) && + !is_overlapped(a->rs1, 1, a->rs2, 1 << MAX(s->lmul, 0)) && ((s->sew + 1) <= (s->cfg_ptr->elen >> 4)); } -- 2.53.0 From: Frank Chang <frank.chang@sifive.com> It's possible that the transmit watermark level (txctrl.txcnt) is updated when the user writes to txctrl register, which may decrease the transmit watermark level to less than the number of entries in the transmit FIFO. In such a case, the interrupt should be raised so we need to call sifive_uart_update_irq() to check and update interrupt when txctrl register is written. Otherwise, the interrupt will have to be delayed until next TX FIFO transmission is processed. Suggested-by: Chao Liu <chao.liu.zevorn@gmail.com> Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260513030503.3665414-1-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/char/sifive_uart.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/char/sifive_uart.c b/hw/char/sifive_uart.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/sifive_uart.c +++ b/hw/char/sifive_uart.c @@ -XXX,XX +XXX,XX @@ sifive_uart_write(void *opaque, hwaddr addr, if (SIFIVE_UART_TXEN(s->txctrl) && !fifo8_is_empty(&s->tx_fifo)) { sifive_uart_trigger_tx_fifo(s); } + sifive_uart_update_irq(s); return; case SIFIVE_UART_RXCTRL: s->rxctrl = val64; -- 2.53.0 From: Abhigyan Kumar <314abh@gmail.com> RISC-V Privileged Specification 3.1.8 (Machine Trap Delegation Registers (medeleg and mideleg)) mentions: "For exceptions that cannot occur in less privileged modes, the corresponding medeleg bits should be read-only zero. In particular, medeleg[11] is read-only zero." QEMU incorrectly included RISCV_EXCP_M_ECALL in DELEGABLE_EXCPS. It allowed the 11th bit to be written and read as set. Fixed by removing it from the DELEGABLE_EXCPS mask, adhering to the specification. Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3438 Signed-off-by: Abhigyan Kumar <314abh@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260427060849.749179-2-314abh@gmail.com> [ Changes by AF: - Remove comment ] Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 1 - 1 file changed, 1 deletion(-) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static const uint64_t all_ints = M_MODE_INTERRUPTS | S_MODE_INTERRUPTS | (1ULL << (RISCV_EXCP_U_ECALL)) | \ (1ULL << (RISCV_EXCP_S_ECALL)) | \ (1ULL << (RISCV_EXCP_VS_ECALL)) | \ - (1ULL << (RISCV_EXCP_M_ECALL)) | \ (1ULL << (RISCV_EXCP_INST_PAGE_FAULT)) | \ (1ULL << (RISCV_EXCP_LOAD_PAGE_FAULT)) | \ (1ULL << (RISCV_EXCP_STORE_PAGE_FAULT)) | \ -- 2.53.0 From: "chen.zhongyao@zte.com.cn" <chen.zhongyao@zte.com.cn> The risc-v vector spec defines vmv.s.x and vfmv.s.f as writing element 0 of the destination register while the remaining destination elements follow the current tail policy. When QEMU runs with rvv_ta_all_1s enabled, those elements must therefore become all 1s. QEMU handled both instructions as translation-time special cases that directly wrote vd[0] and skipped the usual tail processing. As a result, vmv.s.x and vfmv.s.f left the remaining destination elements unchanged instead of applying the configured tail policy. Fix this by routing both instructions through a helper that writes vd[0] and then treats the rest of the destination register as tail, reusing the existing agnostic-element fill logic. Signed-off-by: Zhongyao Chen <chen.zhongyao@zte.com.cn> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <202605061005.646A537u037157@mse-fl1.zte.com.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/helper.h | 4 +++ target/riscv/vector_helper.c | 18 ++++++++++ target/riscv/insn_trans/trans_rvv.c.inc | 44 ++++++++----------------- 3 files changed, 36 insertions(+), 30 deletions(-) diff --git a/target/riscv/helper.h b/target/riscv/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/helper.h +++ b/target/riscv/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_4(vmv_v_x_b, void, ptr, i64, env, i32) DEF_HELPER_4(vmv_v_x_h, void, ptr, i64, env, i32) DEF_HELPER_4(vmv_v_x_w, void, ptr, i64, env, i32) DEF_HELPER_4(vmv_v_x_d, void, ptr, i64, env, i32) +DEF_HELPER_4(vset_velem0_b, void, ptr, i64, env, i32) +DEF_HELPER_4(vset_velem0_h, void, ptr, i64, env, i32) +DEF_HELPER_4(vset_velem0_w, void, ptr, i64, env, i32) +DEF_HELPER_4(vset_velem0_d, void, ptr, i64, env, i32) DEF_HELPER_6(vsaddu_vv_b, void, ptr, ptr, ptr, ptr, env, i32) DEF_HELPER_6(vsaddu_vv_h, void, ptr, ptr, ptr, ptr, env, i32) diff --git a/target/riscv/vector_helper.c b/target/riscv/vector_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/vector_helper.c +++ b/target/riscv/vector_helper.c @@ -XXX,XX +XXX,XX @@ GEN_VEXT_VMV_VX(vmv_v_x_h, int16_t, H2) GEN_VEXT_VMV_VX(vmv_v_x_w, int32_t, H4) GEN_VEXT_VMV_VX(vmv_v_x_d, int64_t, H8) +#define GEN_VEXT_SET_VELEM0(NAME, ETYPE, H) \ +void HELPER(NAME)(void *vd, uint64_t s1, CPURISCVState *env, \ + uint32_t desc) \ +{ \ + uint32_t esz = sizeof(ETYPE); \ + uint32_t vlenb = riscv_cpu_cfg(env)->vlenb; \ + uint32_t vta = vext_vta(desc); \ + \ + *((ETYPE *)vd + H(0)) = (ETYPE)s1; \ + /* Treat every element past vd[0] as tail for scalar-to-vector moves. */ \ + vext_set_elems_1s(vd, vta, esz, vlenb); \ +} + +GEN_VEXT_SET_VELEM0(vset_velem0_b, int8_t, H1) +GEN_VEXT_SET_VELEM0(vset_velem0_h, int16_t, H2) +GEN_VEXT_SET_VELEM0(vset_velem0_w, int32_t, H4) +GEN_VEXT_SET_VELEM0(vset_velem0_d, int64_t, H8) + #define GEN_VEXT_VMERGE_VV(NAME, ETYPE, H) \ void HELPER(NAME)(void *vd, void *v0, void *vs1, void *vs2, \ CPURISCVState *env, uint32_t desc) \ diff --git a/target/riscv/insn_trans/trans_rvv.c.inc b/target/riscv/insn_trans/trans_rvv.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_rvv.c.inc +++ b/target/riscv/insn_trans/trans_rvv.c.inc @@ -XXX,XX +XXX,XX @@ static void vec_element_loadi(DisasContext *s, TCGv_i64 dest, load_element(dest, tcg_env, endian_ofs(s, vreg, idx), s->sew, sign); } -/* Integer Scalar Move Instruction */ +typedef void gen_helper_vset_velem0(TCGv_ptr, TCGv_i64, TCGv_env, TCGv_i32); -static void store_element(TCGv_i64 val, TCGv_ptr base, - int ofs, int sew) +static void vec_element_storei_tail(DisasContext *s, int vreg, TCGv_i64 val) { - switch (sew) { - case MO_8: - tcg_gen_st8_i64(val, base, ofs); - break; - case MO_16: - tcg_gen_st16_i64(val, base, ofs); - break; - case MO_32: - tcg_gen_st32_i64(val, base, ofs); - break; - case MO_64: - tcg_gen_st_i64(val, base, ofs); - break; - default: - g_assert_not_reached(); - } -} + static gen_helper_vset_velem0 * const fns[4] = { + gen_helper_vset_velem0_b, gen_helper_vset_velem0_h, + gen_helper_vset_velem0_w, gen_helper_vset_velem0_d, + }; + TCGv_ptr dest = tcg_temp_new_ptr(); + uint32_t data = FIELD_DP32(0, VDATA, VTA, s->vta); + TCGv_i32 desc = tcg_constant_i32(simd_desc(s->cfg_ptr->vlenb, + s->cfg_ptr->vlenb, data)); -/* - * Store vreg[idx] = val. - * The index must be in range of VLMAX. - */ -static void vec_element_storei(DisasContext *s, int vreg, - int idx, TCGv_i64 val) -{ - store_element(val, tcg_env, endian_ofs(s, vreg, idx), s->sew); + tcg_gen_addi_ptr(dest, tcg_env, vreg_ofs(s, vreg)); + fns[s->sew](dest, val, tcg_env, desc); } /* vmv.x.s rd, vs2 # x[rd] = vs2[0] */ @@ -XXX,XX +XXX,XX @@ static bool trans_vmv_s_x(DisasContext *s, arg_vmv_s_x *a) */ s1 = get_gpr(s, a->rs1, EXT_NONE); tcg_gen_ext_tl_i64(t1, s1); - vec_element_storei(s, a->rd, 0, t1); + vec_element_storei_tail(s, a->rd, t1); gen_set_label(over); tcg_gen_movi_tl(cpu_vstart, 0); finalize_rvv_inst(s); @@ -XXX,XX +XXX,XX @@ static bool trans_vfmv_s_f(DisasContext *s, arg_vfmv_s_f *a) t1 = tcg_temp_new_i64(); do_nanbox(s, t1, cpu_fpr[a->rs1]); - vec_element_storei(s, a->rd, 0, t1); + vec_element_storei_tail(s, a->rd, t1); gen_set_label(over); tcg_gen_movi_tl(cpu_vstart, 0); -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> The RISC-V unpriv specification (zvk.adoc) states that "Zvknhb implies Zvknha". This means that enabling Zvknhb should automatically enable Zvknha. Add Zvknha to ZVKNHB_IMPLIED to ensure the dependency is correctly enforced. This issue was discovered and reported by SpecHunter, an AI-driven architecture specification analysis tool. Link:https://github.com/yizishun/rv-isa-sec/blob/master/output/riscv-isa-manual/pr-2635/qemu.txt Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260511051736.2916225-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static RISCVCPUImpliedExtsRule ZVKNG_IMPLIED = { static RISCVCPUImpliedExtsRule ZVKNHB_IMPLIED = { .ext = CPU_CFG_OFFSET(ext_zvknhb), .implied_multi_exts = { - CPU_CFG_OFFSET(ext_zve64x), + CPU_CFG_OFFSET(ext_zve64x), CPU_CFG_OFFSET(ext_zvknha), RISCV_IMPLIED_EXTS_RULE_END }, -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> Currently, the MENVCFG_CDE (Counter Delegation Enable) bit is unconditionally included in the base write mask for CSR_MENVCFG. This make the subsequent conditional check `(cfg->ext_smcdeleg ? MENVCFG_CDE : 0)` completely ineffective, as a bitwise OR cannot clear a bit that is already set. Fix this by removing MENVCFG_CDE from the initial base mask. The bit will now only be writable when explicitly granted by the `ext_smcdeleg` configuration. This issue was discovered and reported by SpecHunter, an AI-driven architecture specification analysis tool. Link: https://github.com/yizishun/rv-isa-sec/blob/master/output/riscv-isa-manual/pr-2601/qemu.txt Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260511040534.2862443-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException write_menvcfg(CPURISCVState *env, int csrno, { const RISCVCPUConfig *cfg = riscv_cpu_cfg(env); uint64_t mask = MENVCFG_FIOM | MENVCFG_CBIE | MENVCFG_CBCFE | - MENVCFG_CBZE | MENVCFG_CDE; + MENVCFG_CBZE; bool stce_changed = false; if (riscv_cpu_mxl(env) == MXL_RV64) { -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> According to the RISC-V smcdeleg specification: "When menvcfg.CDE=0, attempts to access scountinhibit raise an illegal-instruction exception." The current implementation of scountinhibit_pred() only checks the hardware extensions (ext_ssccfg, ext_smcdeleg) and virtualization status, but completely misses the runtime environment configuration check (menvcfg.CDE). This allows S-mode to access scountinhibit even when the M-mode has explicitly disabled counter delegation. This issue was discovered by the SpecHunter tool (https://github.com/yizishun/rv-isa-sec/blob/master/output/riscv-isa-manual/pr-2571/qemu.txt). Fixes: 6247dc2ef70b ("target/riscv: Add counter delegation/configuration support") Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260508174917.371667-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException scountinhibit_pred(CPURISCVState *env, int csrno) return RISCV_EXCP_ILLEGAL_INST; } + if (!get_field(env->menvcfg, MENVCFG_CDE)) { + return RISCV_EXCP_ILLEGAL_INST; + } + if (env->virt_enabled) { return RISCV_EXCP_VIRT_INSTRUCTION_FAULT; } -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> According to the RISC-V Privileged Manual: "The Sv32 page-based virtual-memory scheme described in sv32 supports 34-bit physical addresses for RV32, so the PMP scheme must support addresses wider than XLEN for RV32." However, the current QEMU implementation uses `target_ulong` (which resolves to `uint32_t` on RV32) for PMP address variables. When shifting these addresses left (e.g., `this_addr << 2`), an integer overflow occurs, truncating the high bits of the 34-bit physical address. Fix this issue by changing the types of PMP address variables (`this_addr` and `prev_addr`) to `hwaddr`. This issue was discovered and reported by SpecHunter, an AI-driven architecture specification analysis tool. Link: https://github.com/yizishun/rv-isa-sec/blob/master/output/riscv-isa-manual/pr-2472/qemu.txt Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260511102627.3120140-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/pmp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/riscv/pmp.c b/target/riscv/pmp.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/pmp.c +++ b/target/riscv/pmp.c @@ -XXX,XX +XXX,XX @@ static void pmp_decode_napot(hwaddr a, hwaddr *sa, hwaddr *ea) void pmp_update_rule_addr(CPURISCVState *env, uint32_t pmp_index) { uint8_t this_cfg = env->pmp_state.pmp[pmp_index].cfg_reg; - target_ulong this_addr = env->pmp_state.pmp[pmp_index].addr_reg; - target_ulong prev_addr = 0u; + hwaddr this_addr = env->pmp_state.pmp[pmp_index].addr_reg; + hwaddr prev_addr = 0u; hwaddr sa = 0u; hwaddr ea = 0u; int g = pmp_get_granularity_g(env); -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> Currently, the Machine Security Configuration Register (mseccfg) was missing from the live migration state. This omission causes the register to be reset to zero on the destination host after migration. Fixed by adding vmstate_mseccfg subsection This vulnerability was discovered and reported by SpecHunter, an AI-driven architecture specification analysis tool. Link: https://github.com/yizishun/rv-isa-sec/blob/a22e4459cd026ae970791dfbd9cfe5d110fbd46b/output/riscv-isa-manual/pr-1879/qemu.txt#L121 Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260511124828.3210477-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/machine.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/target/riscv/machine.c b/target/riscv/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/machine.c +++ b/target/riscv/machine.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_sstc = { } }; +static bool mseccfg_needed(void *opaque) +{ + RISCVCPU *cpu = opaque; + + return cpu->cfg.ext_smepmp || cpu->cfg.ext_zkr + || cpu->cfg.ext_smmpm || cpu->cfg.ext_zicfilp; +} + +static const VMStateDescription vmstate_mseccfg = { + .name = "cpu/mseccfg", + .version_id = 1, + .minimum_version_id = 1, + .needed = mseccfg_needed, + .fields = (const VMStateField[]) { + VMSTATE_UINTTL(env.mseccfg, RISCVCPU), + VMSTATE_END_OF_LIST() + } +}; + const VMStateDescription vmstate_riscv_cpu = { .name = "cpu", .version_id = 11, @@ -XXX,XX +XXX,XX @@ const VMStateDescription vmstate_riscv_cpu = { &vmstate_ssp, &vmstate_ctr, &vmstate_sstc, + &vmstate_mseccfg, NULL } }; -- 2.53.0 From: Alistair Francis <alistair.francis@wdc.com> The RISC-V spec describes bits 0-15 as standard fixed interrupts. The AIA spec on the other hand describes bits 0-12 as standard fixed interrupts. This conflict causes issues for us as we don't dynamically determine if AIA is enabled when setting the *delegable_ints consts. This means currently we incorrectly treat the LCOFIP bit as delegable, even if AIA is disabled, which is incorrect (see the issues mentioned below). The AIA spec indicates that implementations can determine which bits of 13-63 in mvien are writable, so let's just make it bits 15-63 to match the main spec. Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3133 Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3134 Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3135 Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3138 Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3140 Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260513051841.1671987-1-alistair.francis@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException write_stimecmph(CPURISCVState *env, int csrno, #define VSTOPI_NUM_SRCS 5 /* - * All core local interrupts except the fixed ones 0:12. This macro is for + * All core local interrupts except the fixed ones 0:15. This macro is for * virtual interrupts logic so please don't change this to avoid messing up * the whole support, For reference see AIA spec: `5.3 Interrupt filtering and * virtual interrupts for supervisor level` and `6.3.2 Virtual interrupts for * VS level`. */ -#define LOCAL_INTERRUPTS (~0x1FFFULL) +#define LOCAL_INTERRUPTS (~0xFFFFULL) static const uint64_t delegable_ints = S_MODE_INTERRUPTS | VS_MODE_INTERRUPTS | MIP_LCOFIP; -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> Currently, the `mseccfg` CSR is only cleared to 0 during reset if the `ext_smepmp` is enabled. However, this register is now shared by several other extensions such as `zkr`, `smmpm`, and `zicfilp`. Fix by clearing `mseccfg` if any dependent extension is present, and adjusting the relevant comments. This vulnerability was discovered and reported by SpecHunter, an AI-driven architecture specification analysis tool. Link: https://github.com/yizishun/rv-isa-sec/blob/master/output/riscv-svvptc/pr-134/qemu.txt Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260512052240.330815-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_reset_hold(Object *obj, ResetType type) /* * Clear mseccfg and unlock all the PMP entries upon reset. - * This is allowed as per the priv and smepmp specifications - * and is needed to clear stale entries across reboots. + * This is required as per the priv, smepmp, and other security + * extension specifications that share this CSR, and is needed + * to clear stale entries across reboots. */ - if (riscv_cpu_cfg(env)->ext_smepmp) { + if (riscv_cpu_cfg(env)->ext_smepmp || + riscv_cpu_cfg(env)->ext_zkr || + riscv_cpu_cfg(env)->ext_smmpm || + riscv_cpu_cfg(env)->ext_zicfilp) { env->mseccfg = 0; } -- 2.53.0 From: Zongmin Zhou <zhouzongmin@kylinos.cn> When the Zicbop extension is available expose it to the KVM guest. Also read and validate cbop_blocksize from the host via KVM interface. Signed-off-by: Zongmin Zhou <zhouzongmin@kylinos.cn> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <9e388aa9984ea9d3d0c85e1630c9195023938952.1778653159.git.zhouzongmin@kylinos.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/kvm/kvm-cpu.c | 34 ++++++++++++++++++++++++++++++++-- 1 file changed, 32 insertions(+), 2 deletions(-) diff --git a/target/riscv/kvm/kvm-cpu.c b/target/riscv/kvm/kvm-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/kvm/kvm-cpu.c +++ b/target/riscv/kvm/kvm-cpu.c @@ -XXX,XX +XXX,XX @@ static void kvm_cpu_csr_set_u64(RISCVCPU *cpu, KVMCPUConfig *csr_cfg, static KVMCPUConfig kvm_multi_ext_cfgs[] = { KVM_EXT_CFG("zicbom", ext_zicbom, KVM_RISCV_ISA_EXT_ZICBOM), + KVM_EXT_CFG("zicbop", ext_zicbop, KVM_RISCV_ISA_EXT_ZICBOP), KVM_EXT_CFG("zicboz", ext_zicboz, KVM_RISCV_ISA_EXT_ZICBOZ), KVM_EXT_CFG("ziccrse", ext_ziccrse, KVM_RISCV_ISA_EXT_ZICCRSE), KVM_EXT_CFG("zicntr", ext_zicntr, KVM_RISCV_ISA_EXT_ZICNTR), @@ -XXX,XX +XXX,XX @@ static KVMCPUConfig kvm_cboz_blocksize = { .kvm_reg_id = KVM_REG_RISCV_CONFIG_REG(zicboz_block_size) }; +static KVMCPUConfig kvm_cbop_blocksize = { + .name = "cbop_blocksize", + .offset = CPU_CFG_OFFSET(cbop_blocksize), + .kvm_reg_id = KVM_REG_RISCV_CONFIG_REG(zicbop_block_size) +}; + static KVMCPUConfig kvm_v_vlenb = { .name = "vlenb", .offset = CPU_CFG_OFFSET(vlenb), @@ -XXX,XX +XXX,XX @@ static void kvm_riscv_init_cfg(RISCVCPU *cpu, KVMScratchCPU *kvmcpu) kvm_riscv_read_cbomz_blksize(cpu, kvmcpu, &kvm_cbom_blocksize); } + if (cpu->cfg.ext_zicbop) { + kvm_riscv_read_cbomz_blksize(cpu, kvmcpu, &kvm_cbop_blocksize); + } + if (cpu->cfg.ext_zicboz) { kvm_riscv_read_cbomz_blksize(cpu, kvmcpu, &kvm_cboz_blocksize); } @@ -XXX,XX +XXX,XX @@ void riscv_kvm_cpu_finalize_features(RISCVCPU *cpu, Error **errp) int ret; /* short-circuit without spinning the scratch CPU */ - if (!cpu->cfg.ext_zicbom && !cpu->cfg.ext_zicboz && - !riscv_has_ext(env, RVV)) { + if (!cpu->cfg.ext_zicbom && !cpu->cfg.ext_zicbop && + !cpu->cfg.ext_zicboz && !riscv_has_ext(env, RVV)) { return; } @@ -XXX,XX +XXX,XX @@ void riscv_kvm_cpu_finalize_features(RISCVCPU *cpu, Error **errp) } } + if (cpu->cfg.ext_zicbop && + riscv_cpu_option_set(kvm_cbop_blocksize.name)) { + + reg.id = KVM_RISCV_REG_ID_ULONG(KVM_REG_RISCV_CONFIG, + kvm_cbop_blocksize.kvm_reg_id); + reg.addr = (uint64_t)&val; + ret = ioctl(kvmcpu.cpufd, KVM_GET_ONE_REG, &reg); + if (ret != 0) { + error_setg_errno(errp, errno, "Unable to read cbop_blocksize"); + return; + } + + if (cpu->cfg.cbop_blocksize != val) { + error_setg(errp, "Unable to set cbop_blocksize to a different " + "value than the host (%lu)", val); + return; + } + } + /* Users are setting vlen, not vlenb */ if (riscv_has_ext(env, RVV) && riscv_cpu_option_set("vlen")) { if (!kvm_v_vlenb.supported) { -- 2.53.0 From: Zongmin Zhou <zhouzongmin@kylinos.cn> Expose the BFloat16 extensions (Zfbfmin, Zvfbfmin, Zvfbfwma) to KVM guests when available in hardware. Signed-off-by: Zongmin Zhou <zhouzongmin@kylinos.cn> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <1258febb0eeb4ee286eb88f70b077a7f1ece507f.1778653159.git.zhouzongmin@kylinos.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/kvm/kvm-cpu.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/target/riscv/kvm/kvm-cpu.c b/target/riscv/kvm/kvm-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/kvm/kvm-cpu.c +++ b/target/riscv/kvm/kvm-cpu.c @@ -XXX,XX +XXX,XX @@ static KVMCPUConfig kvm_multi_ext_cfgs[] = { KVM_EXT_CFG("zacas", ext_zacas, KVM_RISCV_ISA_EXT_ZACAS), KVM_EXT_CFG("zawrs", ext_zawrs, KVM_RISCV_ISA_EXT_ZAWRS), KVM_EXT_CFG("zfa", ext_zfa, KVM_RISCV_ISA_EXT_ZFA), + KVM_EXT_CFG("zfbfmin", ext_zfbfmin, KVM_RISCV_ISA_EXT_ZFBFMIN), KVM_EXT_CFG("zfh", ext_zfh, KVM_RISCV_ISA_EXT_ZFH), KVM_EXT_CFG("zfhmin", ext_zfhmin, KVM_RISCV_ISA_EXT_ZFHMIN), KVM_EXT_CFG("zba", ext_zba, KVM_RISCV_ISA_EXT_ZBA), @@ -XXX,XX +XXX,XX @@ static KVMCPUConfig kvm_multi_ext_cfgs[] = { KVM_EXT_CFG("zvbc", ext_zvbc, KVM_RISCV_ISA_EXT_ZVBC), KVM_EXT_CFG("zvfh", ext_zvfh, KVM_RISCV_ISA_EXT_ZVFH), KVM_EXT_CFG("zvfhmin", ext_zvfhmin, KVM_RISCV_ISA_EXT_ZVFHMIN), + KVM_EXT_CFG("zvfbfmin", ext_zvfbfmin, KVM_RISCV_ISA_EXT_ZVFBFMIN), + KVM_EXT_CFG("zvfbfwma", ext_zvfbfwma, KVM_RISCV_ISA_EXT_ZVFBFWMA), KVM_EXT_CFG("zvkb", ext_zvkb, KVM_RISCV_ISA_EXT_ZVKB), KVM_EXT_CFG("zvkg", ext_zvkg, KVM_RISCV_ISA_EXT_ZVKG), KVM_EXT_CFG("zvkned", ext_zvkned, KVM_RISCV_ISA_EXT_ZVKNED), -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> Fix a mode-to-capability comparison error in riscv_iommu_validate_device_ctx. The code was comparing fsc_mode (a value) against a capability bitmask, making the SV32 support check ineffective. This issue was discovered and reported by SpecHunter, an AI-driven architecture specification analysis tool. Link: https://github.com/yizishun/rv-isa-sec/blob/master/output/riscv-iommu/pr-694/qemu.txt Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260511080904.3049446-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/riscv/riscv-iommu.c b/hw/riscv/riscv-iommu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.c +++ b/hw/riscv/riscv-iommu.c @@ -XXX,XX +XXX,XX @@ static bool riscv_iommu_validate_device_ctx(RISCVIOMMUState *s, } if (ctx->tc & RISCV_IOMMU_DC_TC_SXL) { - if (fsc_mode == RISCV_IOMMU_CAP_SV32 && + if (fsc_mode == RISCV_IOMMU_DC_FSC_IOSATP_MODE_SV32 && !(s->cap & RISCV_IOMMU_CAP_SV32)) { return false; } -- 2.53.0 From: Chengbo Gao <gaochengbo@bosc.ac.cn> PCI bus numbers may still be unassigned when QEMU initializes a PCI device's bus-master address space. For devices behind bridges, pci_bus_num() can return 0 at that point because the guest has not yet programmed the bridge Secondary Bus Number register. The RISC-V IOMMU currently stores a fixed device_id in RISCVIOMMUSpace when the address space is created. If the guest later enumerates the device on a non-zero bus, DMA translation still uses the stale device_id and may look up the wrong device context in the DDT. Store the stable PCIBus pointer and devfn in RISCVIOMMUSpace instead, and compute the device_id from the current bus number when it is needed. This keeps DMA translation and ATS invalidation in sync with guest PCI bus enumeration. Signed-off-by: Chengbo Gao <gaochengbo@bosc.ac.cn> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260514020637.2819308-1-gaochengbo@bosc.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu.c | 40 +++++++++++++++++++++++++--------------- 1 file changed, 25 insertions(+), 15 deletions(-) diff --git a/hw/riscv/riscv-iommu.c b/hw/riscv/riscv-iommu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.c +++ b/hw/riscv/riscv-iommu.c @@ -XXX,XX +XXX,XX @@ struct RISCVIOMMUSpace { IOMMUMemoryRegion iova_mr; /* IOVA memory region for attached device */ AddressSpace iova_as; /* IOVA address space for attached device */ RISCVIOMMUState *iommu; /* Managing IOMMU device state */ - uint32_t devid; /* Requester identifier, AKA device_id */ + PCIBus *bus; /* PCI bus of the requester */ + uint8_t devfn; /* Requester identifier, AKA device_id */ bool notifier; /* IOMMU unmap notifier enabled */ QLIST_ENTRY(RISCVIOMMUSpace) list; }; @@ -XXX,XX +XXX,XX @@ struct RISCVIOMMUEntry { /* IOMMU index for transactions without process_id specified. */ #define RISCV_IOMMU_NOPROCID 0 +static uint32_t riscv_iommu_space_devid(RISCVIOMMUSpace *as) +{ + uint32_t devid = PCI_BUILD_BDF(pci_bus_num(as->bus), as->devfn); + + /* FIXME: PCIe bus remapping for attached endpoints. */ + devid |= as->iommu->bus << 8; + return devid; +} + static uint8_t riscv_iommu_get_icvec_vector(uint32_t icvec, uint32_t vec_type) { switch (vec_type) { @@ -XXX,XX +XXX,XX @@ static void riscv_iommu_ctx_put(RISCVIOMMUState *s, void *ref) } /* Find or allocate address space for a given device */ -static AddressSpace *riscv_iommu_space(RISCVIOMMUState *s, uint32_t devid) +static AddressSpace *riscv_iommu_space(RISCVIOMMUState *s, PCIBus *bus, + int devfn) { RISCVIOMMUSpace *as; - /* FIXME: PCIe bus remapping for attached endpoints. */ - devid |= s->bus << 8; - QLIST_FOREACH(as, &s->spaces, list) { - if (as->devid == devid) { + if (as->bus == bus && as->devfn == devfn) { break; } } @@ -XXX,XX +XXX,XX @@ static AddressSpace *riscv_iommu_space(RISCVIOMMUState *s, uint32_t devid) as = g_new0(RISCVIOMMUSpace, 1); as->iommu = s; - as->devid = devid; + as->bus = bus; + as->devfn = devfn; snprintf(name, sizeof(name), "riscv-iommu-%04x:%02x.%d-iova", - PCI_BUS_NUM(as->devid), PCI_SLOT(as->devid), PCI_FUNC(as->devid)); + pci_bus_num(bus), PCI_SLOT(devfn), PCI_FUNC(devfn)); /* IOVA address space, untranslated addresses */ memory_region_init_iommu(&as->iova_mr, sizeof(as->iova_mr), @@ -XXX,XX +XXX,XX @@ static AddressSpace *riscv_iommu_space(RISCVIOMMUState *s, uint32_t devid) QLIST_INSERT_HEAD(&s->spaces, as, list); - trace_riscv_iommu_new(s->parent_obj.id, PCI_BUS_NUM(as->devid), - PCI_SLOT(as->devid), PCI_FUNC(as->devid)); + trace_riscv_iommu_new(s->parent_obj.id, pci_bus_num(bus), + PCI_SLOT(devfn), PCI_FUNC(devfn)); } return &as->iova_as; } @@ -XXX,XX +XXX,XX @@ static void riscv_iommu_ats(RISCVIOMMUState *s, pid = get_field(cmd->dword0, RISCV_IOMMU_CMD_ATS_PID); QLIST_FOREACH(as, &s->spaces, list) { - if (as->devid == devid) { + if (riscv_iommu_space_devid(as) == devid) { break; } } @@ -XXX,XX +XXX,XX @@ static IOMMUTLBEntry riscv_iommu_memory_region_translate( .addr_mask = ~0ULL, .perm = flag, }; + uint32_t devid = riscv_iommu_space_devid(as); - ctx = riscv_iommu_ctx(as->iommu, as->devid, iommu_idx, &ref); + ctx = riscv_iommu_ctx(as->iommu, devid, iommu_idx, &ref); if (ctx == NULL) { /* Translation disabled or invalid. */ iotlb.addr_mask = 0; @@ -XXX,XX +XXX,XX @@ static IOMMUTLBEntry riscv_iommu_memory_region_translate( } /* Trace all dma translations with original access flags. */ - trace_riscv_iommu_dma(as->iommu->parent_obj.id, PCI_BUS_NUM(as->devid), - PCI_SLOT(as->devid), PCI_FUNC(as->devid), iommu_idx, + trace_riscv_iommu_dma(as->iommu->parent_obj.id, PCI_BUS_NUM(devid), + PCI_SLOT(devid), PCI_FUNC(devid), iommu_idx, IOMMU_FLAG_STR[flag & IOMMU_RW], iotlb.iova, iotlb.translated_addr); @@ -XXX,XX +XXX,XX @@ static AddressSpace *riscv_iommu_find_as(PCIBus *bus, void *opaque, int devfn) /* Find first matching IOMMU */ while (s != NULL && as == NULL) { - as = riscv_iommu_space(s, PCI_BUILD_BDF(pci_bus_num(bus), devfn)); + as = riscv_iommu_space(s, bus, devfn); s = s->iommus.le_next; } -- 2.53.0 From: Guenter Roeck <linux@roeck-us.net> Minimal clock register configuration required to boot Linux without backtraces in the clock code. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260514-reference-overhand-749149e36a88@spud> [ Changes by AF: - Fixup checkpatch errors ] Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/misc/mchp_pfsoc_ioscb.h | 2 ++ hw/misc/mchp_pfsoc_ioscb.c | 47 +++++++++++++++++++++++++++++- hw/misc/mchp_pfsoc_sysreg.c | 13 +++++++++ 3 files changed, 61 insertions(+), 1 deletion(-) diff --git a/include/hw/misc/mchp_pfsoc_ioscb.h b/include/hw/misc/mchp_pfsoc_ioscb.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/mchp_pfsoc_ioscb.h +++ b/include/hw/misc/mchp_pfsoc_ioscb.h @@ -XXX,XX +XXX,XX @@ typedef struct MchpPfSoCIoscbState { MemoryRegion mailbox; MemoryRegion cfg; MemoryRegion ccc; + MemoryRegion pll_nw_0; + MemoryRegion pll_nw_1; MemoryRegion pll_mss; MemoryRegion cfm_mss; MemoryRegion pll_ddr; diff --git a/hw/misc/mchp_pfsoc_ioscb.c b/hw/misc/mchp_pfsoc_ioscb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/mchp_pfsoc_ioscb.c +++ b/hw/misc/mchp_pfsoc_ioscb.c @@ -XXX,XX +XXX,XX @@ #define IOSCB_MAILBOX_BASE 0x07020800 #define IOSCB_CFG_BASE 0x07080000 #define IOSCB_CCC_BASE 0x08000000 +#define IOSCB_PLL_NW0_BASE 0x08100000 +#define IOSCB_PLL_NW1_BASE 0x08200000 #define IOSCB_PLL_MSS_BASE 0x0E001000 #define IOSCB_CFM_MSS_BASE 0x0E002000 #define IOSCB_PLL_DDR_BASE 0x0E010000 @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps mchp_pfsoc_dummy_ops = { /* All PLL modules in IOSCB have the same register layout */ #define PLL_CTRL 0x04 +#define PLL_REF_FB 0x08 +#define PLL_DIV_0_1 0x10 +#define PLL_DIV_2_3 0x14 +#define PLL_CTRL2 0x18 +#define PLL_CAL 0x1c +#define PLL_PHADJ 0x20 +#define SSCG_REG_0 0x24 +#define SSCG_REG_1 0x28 +#define SSCG_REG_2 0x2c +#define SSCG_REG_3 0x30 static uint64_t mchp_pfsoc_pll_read(void *opaque, hwaddr offset, unsigned size) @@ -XXX,XX +XXX,XX @@ static uint64_t mchp_pfsoc_pll_read(void *opaque, hwaddr offset, /* PLL is locked */ val = BIT(25); break; + case PLL_DIV_0_1: + case PLL_DIV_2_3: + val = 0x01000100; /* return valid post divider values */ + break; + case PLL_CTRL2: + val = 0x00001110; + break; + case PLL_REF_FB: + val = 0x00000100; /* RFDIV := 1 */ + break; + case SSCG_REG_2: + val = 0x00000001; /* INTIN := 1 */ + break; + case PLL_PHADJ: + val = 0x00000401; + break; default: qemu_log_mask(LOG_UNIMP, "%s: unimplemented device read " "(size %d, offset 0x%" HWADDR_PRIx ")\n", @@ -XXX,XX +XXX,XX @@ static uint64_t mchp_pfsoc_pll_read(void *opaque, hwaddr offset, return val; } +static void mchp_pfsoc_pll_write(void *opaque, hwaddr offset, + uint64_t value, unsigned size) +{ + qemu_log_mask(LOG_UNIMP, "%s: unimplemented device write " + "(size %d, value 0x%" PRIx64 + ", offset 0x%" HWADDR_PRIx ")\n", + __func__, size, value, offset); +} + static const MemoryRegionOps mchp_pfsoc_pll_ops = { .read = mchp_pfsoc_pll_read, - .write = mchp_pfsoc_dummy_write, + .write = mchp_pfsoc_pll_write, .endianness = DEVICE_LITTLE_ENDIAN, }; @@ -XXX,XX +XXX,XX @@ static void mchp_pfsoc_ioscb_realize(DeviceState *dev, Error **errp) "mchp.pfsoc.ioscb.ccc", IOSCB_CCC_REG_SIZE); memory_region_add_subregion(&s->container, IOSCB_CCC_BASE, &s->ccc); + memory_region_init_io(&s->pll_nw_0, OBJECT(s), &mchp_pfsoc_pll_ops, s, + "mchp.pfsoc.ioscb.pll_nw_0", IOSCB_SUBMOD_REG_SIZE); + memory_region_add_subregion(&s->container, IOSCB_PLL_NW0_BASE, &s->pll_nw_0); + + memory_region_init_io(&s->pll_nw_1, OBJECT(s), &mchp_pfsoc_pll_ops, s, + "mchp.pfsoc.ioscb.pll_nw_1", IOSCB_SUBMOD_REG_SIZE); + memory_region_add_subregion(&s->container, IOSCB_PLL_NW1_BASE, &s->pll_nw_1); + memory_region_init_io(&s->pll_mss, OBJECT(s), &mchp_pfsoc_pll_ops, s, "mchp.pfsoc.ioscb.pll_mss", IOSCB_SUBMOD_REG_SIZE); memory_region_add_subregion(&s->container, IOSCB_PLL_MSS_BASE, &s->pll_mss); diff --git a/hw/misc/mchp_pfsoc_sysreg.c b/hw/misc/mchp_pfsoc_sysreg.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/mchp_pfsoc_sysreg.c +++ b/hw/misc/mchp_pfsoc_sysreg.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/mchp_pfsoc_sysreg.h" #include "system/runstate.h" +#define CLOCK_CONFIG_CR 0x8 +#define RTC_CLOCK_CR 0xc #define MSS_RESET_CR 0x18 #define ENVM_CR 0xb8 #define MESSAGE_INT 0x118c @@ -XXX,XX +XXX,XX @@ static uint64_t mchp_pfsoc_sysreg_read(void *opaque, hwaddr offset, uint32_t val = 0; switch (offset) { + case CLOCK_CONFIG_CR: + /* Icicle kit reference design cpu/axi/ahb divider setting */ + val = 0x24; + break; + case RTC_CLOCK_CR: + /* + * Bit 16 enables the RTC clock, 0x7d is the required divider + * setting for a 125 MHz reference. + */ + val = BIT(16) | 0x7d; + break; case ENVM_CR: /* Indicate the eNVM is running at the configured divider rate */ val = BIT(6); -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> The entry was missing from isa_edata_arr[]. Fixes: 32bbab666 ("target/riscv: add draft RISC-V Zbr ext as xbr0p93") Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-2-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(svrsw60t59b, PRIV_VERSION_1_13_0, ext_svrsw60t59b), ISA_EXT_DATA_ENTRY(svukte, PRIV_VERSION_1_13_0, ext_svukte), ISA_EXT_DATA_ENTRY(svvptc, PRIV_VERSION_1_13_0, ext_svvptc), + ISA_EXT_DATA_ENTRY(xlrbr, PRIV_VERSION_1_13_0, ext_xlrbr), ISA_EXT_DATA_ENTRY(xmipscbop, PRIV_VERSION_1_12_0, ext_xmipscbop), ISA_EXT_DATA_ENTRY(xmipscmov, PRIV_VERSION_1_12_0, ext_xmipscmov), ISA_EXT_DATA_ENTRY(xmipslsp, PRIV_VERSION_1_12_0, ext_xmipslsp), -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Noticed when realizing that 'svadu' was too far apart from 'svade'. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-3-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(smcdeleg, PRIV_VERSION_1_13_0, ext_smcdeleg), ISA_EXT_DATA_ENTRY(smcntrpmf, PRIV_VERSION_1_12_0, ext_smcntrpmf), ISA_EXT_DATA_ENTRY(smcsrind, PRIV_VERSION_1_13_0, ext_smcsrind), + ISA_EXT_DATA_ENTRY(smctr, PRIV_VERSION_1_12_0, ext_smctr), ISA_EXT_DATA_ENTRY(smdbltrp, PRIV_VERSION_1_13_0, ext_smdbltrp), ISA_EXT_DATA_ENTRY(smepmp, PRIV_VERSION_1_12_0, ext_smepmp), ISA_EXT_DATA_ENTRY(smpmpmt, PRIV_VERSION_1_12_0, ext_smpmpmt), @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(sscofpmf, PRIV_VERSION_1_12_0, ext_sscofpmf), ISA_EXT_DATA_ENTRY(sscounterenw, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(sscsrind, PRIV_VERSION_1_12_0, ext_sscsrind), + ISA_EXT_DATA_ENTRY(ssctr, PRIV_VERSION_1_12_0, ext_ssctr), ISA_EXT_DATA_ENTRY(ssdbltrp, PRIV_VERSION_1_13_0, ext_ssdbltrp), ISA_EXT_DATA_ENTRY(ssnpm, PRIV_VERSION_1_13_0, ext_ssnpm), ISA_EXT_DATA_ENTRY(sspm, PRIV_VERSION_1_13_0, ext_sspm), @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(ssu64xl, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(supm, PRIV_VERSION_1_13_0, ext_supm), ISA_EXT_DATA_ENTRY(svade, PRIV_VERSION_1_11_0, ext_svade), - ISA_EXT_DATA_ENTRY(smctr, PRIV_VERSION_1_12_0, ext_smctr), - ISA_EXT_DATA_ENTRY(ssctr, PRIV_VERSION_1_12_0, ext_ssctr), ISA_EXT_DATA_ENTRY(svadu, PRIV_VERSION_1_12_0, ext_svadu), ISA_EXT_DATA_ENTRY(svinval, PRIV_VERSION_1_12_0, ext_svinval), ISA_EXT_DATA_ENTRY(svnapot, PRIV_VERSION_1_12_0, ext_svnapot), -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> We want to reduce the usage of the riscv_cpu_* arrays in target/riscv/cpu.c, centering everything in isa_edata_arr[] instead, to reduce data duplication and make our lives a bit easier when adding new extensions. To do that we'll have to make isa_edata_arr[] do what the other arrays are currently doing, not breaking existing semantics in the process. The riscv_cpu_* arrays have a few exclusive uses: - set default extensions for rv32 and rv64; - create user CPU properties; - misc uses around tcg-cpu.c and kvm-cpu.c. We'll slowly make isa_edata_arr[] supersede these arrays. Start by adding a new 'prop_name' field in RISCVIsaExtData. This field is needed because not all extensions have properties and not all properties match the riscv,isa string name. Create two additional macros and reclassify existing isa_edata_arr[] entries as follows: - ISA_EXT_DATA_ENTRY creates an entry where prop_name == riscv,isa. Most of our regular extensions fall into this category; - ISA_EXPERIMENTAL_EXT_DATA_ENTRY: same as above but add a "x-" to the prop name, i.e. prop_name == "x-" + riscv,isa; - ISA_INTERNAL_EXT_DATA_ENTRY: used to declared internal extensions. By 'internal' we mean users/management can't set them on or off. With these new macros we can start our simplification by changing riscv-qmp-cmds to use isa_edata_arr[]. We'll just scroll through it once and gather what we need. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-4-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 1 + target/riscv/cpu.c | 60 +++++++++++++++++++++++------------ target/riscv/riscv-qmp-cmds.c | 30 ++++-------------- 3 files changed, 47 insertions(+), 44 deletions(-) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ extern const RISCVCPUMultiExtConfig riscv_cpu_named_features[]; typedef struct isa_ext_data { const char *name; + const char *prop_name; int min_version; int ext_enable_offset; } RISCVIsaExtData; diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_cfg_merge(RISCVCPUConfig *dest, const RISCVCPUConfig *src) #include "cpu_cfg_fields.h.inc" } +/* Use this for regular user facing extensions */ #define ISA_EXT_DATA_ENTRY(_name, _min_ver, _prop) \ - {#_name, _min_ver, CPU_CFG_OFFSET(_prop)} + {#_name, #_name, _min_ver, CPU_CFG_OFFSET(_prop)} + +/* + * Same as above but for experimental extensions. We'll add a + * "x-" right after "_name" when creating the user property. + */ +#define ISA_EXPERIMENTAL_EXT_DATA_ENTRY(_name, _min_ver, _prop) \ + {#_name, "x-" #_name, _min_ver, CPU_CFG_OFFSET(_prop)} + +/* + * Internal extensions are extensions we will declare in the + * riscv,isa DT but they don't have an user property, i.e. + * users/management can't enable/disable them. + */ +#define ISA_INTERNAL_EXT_DATA_ENTRY(_name, _min_ver, _prop) \ + {#_name, NULL, _min_ver, CPU_CFG_OFFSET(_prop)} /* * Here are the ordering rules of extension naming defined by RISC-V @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_cfg_merge(RISCVCPUConfig *dest, const RISCVCPUConfig *src) * instead. */ const RISCVIsaExtData isa_edata_arr[] = { - ISA_EXT_DATA_ENTRY(zic64b, PRIV_VERSION_1_12_0, ext_zic64b), + ISA_INTERNAL_EXT_DATA_ENTRY(zic64b, PRIV_VERSION_1_12_0, ext_zic64b), ISA_EXT_DATA_ENTRY(zicbom, PRIV_VERSION_1_12_0, ext_zicbom), ISA_EXT_DATA_ENTRY(zicbop, PRIV_VERSION_1_12_0, ext_zicbop), ISA_EXT_DATA_ENTRY(zicboz, PRIV_VERSION_1_12_0, ext_zicboz), - ISA_EXT_DATA_ENTRY(ziccamoa, PRIV_VERSION_1_11_0, has_priv_1_11), - ISA_EXT_DATA_ENTRY(ziccif, PRIV_VERSION_1_11_0, has_priv_1_11), - ISA_EXT_DATA_ENTRY(zicclsm, PRIV_VERSION_1_11_0, has_priv_1_11), + ISA_INTERNAL_EXT_DATA_ENTRY(ziccamoa, PRIV_VERSION_1_11_0, has_priv_1_11), + ISA_INTERNAL_EXT_DATA_ENTRY(ziccif, PRIV_VERSION_1_11_0, has_priv_1_11), + ISA_INTERNAL_EXT_DATA_ENTRY(zicclsm, PRIV_VERSION_1_11_0, has_priv_1_11), ISA_EXT_DATA_ENTRY(ziccrse, PRIV_VERSION_1_11_0, ext_ziccrse), ISA_EXT_DATA_ENTRY(zicfilp, PRIV_VERSION_1_12_0, ext_zicfilp), ISA_EXT_DATA_ENTRY(zicfiss, PRIV_VERSION_1_13_0, ext_zicfiss), @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(zilsd, PRIV_VERSION_1_12_0, ext_zilsd), ISA_EXT_DATA_ENTRY(zimop, PRIV_VERSION_1_13_0, ext_zimop), ISA_EXT_DATA_ENTRY(zmmul, PRIV_VERSION_1_12_0, ext_zmmul), - ISA_EXT_DATA_ENTRY(za64rs, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(za64rs, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(zaamo, PRIV_VERSION_1_12_0, ext_zaamo), ISA_EXT_DATA_ENTRY(zabha, PRIV_VERSION_1_13_0, ext_zabha), ISA_EXT_DATA_ENTRY(zacas, PRIV_VERSION_1_12_0, ext_zacas), @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(zhinx, PRIV_VERSION_1_12_0, ext_zhinx), ISA_EXT_DATA_ENTRY(zhinxmin, PRIV_VERSION_1_12_0, ext_zhinxmin), ISA_EXT_DATA_ENTRY(sdtrig, PRIV_VERSION_1_12_0, debug), - ISA_EXT_DATA_ENTRY(shcounterenw, PRIV_VERSION_1_12_0, has_priv_1_12), - ISA_EXT_DATA_ENTRY(sha, PRIV_VERSION_1_12_0, ext_sha), - ISA_EXT_DATA_ENTRY(shgatpa, PRIV_VERSION_1_12_0, has_priv_1_12), - ISA_EXT_DATA_ENTRY(shtvala, PRIV_VERSION_1_12_0, has_priv_1_12), - ISA_EXT_DATA_ENTRY(shvsatpa, PRIV_VERSION_1_12_0, has_priv_1_12), - ISA_EXT_DATA_ENTRY(shvstvala, PRIV_VERSION_1_12_0, has_priv_1_12), - ISA_EXT_DATA_ENTRY(shvstvecd, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(shcounterenw, PRIV_VERSION_1_12_0, + has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(sha, PRIV_VERSION_1_12_0, ext_sha), + ISA_INTERNAL_EXT_DATA_ENTRY(shgatpa, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(shtvala, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(shvsatpa, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(shvstvala, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(shvstvecd, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(smaia, PRIV_VERSION_1_12_0, ext_smaia), ISA_EXT_DATA_ENTRY(smcdeleg, PRIV_VERSION_1_13_0, ext_smcdeleg), ISA_EXT_DATA_ENTRY(smcntrpmf, PRIV_VERSION_1_12_0, ext_smcntrpmf), @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(smstateen, PRIV_VERSION_1_12_0, ext_smstateen), ISA_EXT_DATA_ENTRY(ssaia, PRIV_VERSION_1_12_0, ext_ssaia), ISA_EXT_DATA_ENTRY(ssccfg, PRIV_VERSION_1_13_0, ext_ssccfg), - ISA_EXT_DATA_ENTRY(ssccptr, PRIV_VERSION_1_11_0, has_priv_1_11), + ISA_INTERNAL_EXT_DATA_ENTRY(ssccptr, PRIV_VERSION_1_11_0, has_priv_1_11), ISA_EXT_DATA_ENTRY(sscofpmf, PRIV_VERSION_1_12_0, ext_sscofpmf), - ISA_EXT_DATA_ENTRY(sscounterenw, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(sscounterenw, PRIV_VERSION_1_12_0, + has_priv_1_12), ISA_EXT_DATA_ENTRY(sscsrind, PRIV_VERSION_1_12_0, ext_sscsrind), ISA_EXT_DATA_ENTRY(ssctr, PRIV_VERSION_1_12_0, ext_ssctr), ISA_EXT_DATA_ENTRY(ssdbltrp, PRIV_VERSION_1_13_0, ext_ssdbltrp), ISA_EXT_DATA_ENTRY(ssnpm, PRIV_VERSION_1_13_0, ext_ssnpm), ISA_EXT_DATA_ENTRY(sspm, PRIV_VERSION_1_13_0, ext_sspm), - ISA_EXT_DATA_ENTRY(ssstateen, PRIV_VERSION_1_12_0, ext_ssstateen), - ISA_EXT_DATA_ENTRY(ssstrict, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(ssstateen, PRIV_VERSION_1_12_0, ext_ssstateen), + ISA_INTERNAL_EXT_DATA_ENTRY(ssstrict, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(sstc, PRIV_VERSION_1_12_0, ext_sstc), - ISA_EXT_DATA_ENTRY(sstvala, PRIV_VERSION_1_12_0, has_priv_1_12), - ISA_EXT_DATA_ENTRY(sstvecd, PRIV_VERSION_1_12_0, has_priv_1_12), - ISA_EXT_DATA_ENTRY(ssu64xl, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(sstvala, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(sstvecd, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(ssu64xl, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(supm, PRIV_VERSION_1_13_0, ext_supm), ISA_EXT_DATA_ENTRY(svade, PRIV_VERSION_1_11_0, ext_svade), ISA_EXT_DATA_ENTRY(svadu, PRIV_VERSION_1_12_0, ext_svadu), @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(svnapot, PRIV_VERSION_1_12_0, ext_svnapot), ISA_EXT_DATA_ENTRY(svpbmt, PRIV_VERSION_1_12_0, ext_svpbmt), ISA_EXT_DATA_ENTRY(svrsw60t59b, PRIV_VERSION_1_13_0, ext_svrsw60t59b), - ISA_EXT_DATA_ENTRY(svukte, PRIV_VERSION_1_13_0, ext_svukte), + ISA_EXPERIMENTAL_EXT_DATA_ENTRY(svukte, PRIV_VERSION_1_13_0, ext_svukte), ISA_EXT_DATA_ENTRY(svvptc, PRIV_VERSION_1_13_0, ext_svvptc), ISA_EXT_DATA_ENTRY(xlrbr, PRIV_VERSION_1_13_0, ext_xlrbr), ISA_EXT_DATA_ENTRY(xmipscbop, PRIV_VERSION_1_12_0, ext_xmipscbop), diff --git a/target/riscv/riscv-qmp-cmds.c b/target/riscv/riscv-qmp-cmds.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/riscv-qmp-cmds.c +++ b/target/riscv/riscv-qmp-cmds.c @@ -XXX,XX +XXX,XX @@ static void riscv_obj_add_qdict_prop(Object *obj, QDict *qdict_out, } } -static void riscv_obj_add_multiext_props(Object *obj, QDict *qdict_out, - const RISCVCPUMultiExtConfig *arr) +static void riscv_obj_add_multiext_props(Object *obj, QDict *qdict_out) { - for (int i = 0; arr[i].name != NULL; i++) { - riscv_obj_add_qdict_prop(obj, qdict_out, arr[i].name); - } -} + const RISCVIsaExtData *edata; -static void riscv_obj_add_named_feats_qdict(Object *obj, QDict *qdict_out) -{ - const RISCVCPUMultiExtConfig *named_cfg; - RISCVCPU *cpu = RISCV_CPU(obj); - QObject *value; - bool flag_val; - - for (int i = 0; riscv_cpu_named_features[i].name != NULL; i++) { - named_cfg = &riscv_cpu_named_features[i]; - flag_val = isa_ext_is_enabled(cpu, named_cfg->offset); - value = QOBJECT(qbool_from_bool(flag_val)); - - qdict_put_obj(qdict_out, named_cfg->name, value); + for (edata = isa_edata_arr; edata && edata->name; edata++) { + if (edata->prop_name) { + riscv_obj_add_qdict_prop(obj, qdict_out, edata->prop_name); + } } } @@ -XXX,XX +XXX,XX @@ CpuModelExpansionInfo *qmp_query_cpu_model_expansion(CpuModelExpansionType type, qdict_out = qdict_new(); - riscv_obj_add_multiext_props(obj, qdict_out, riscv_cpu_extensions); - riscv_obj_add_multiext_props(obj, qdict_out, riscv_cpu_experimental_exts); - riscv_obj_add_multiext_props(obj, qdict_out, riscv_cpu_vendor_exts); - riscv_obj_add_named_feats_qdict(obj, qdict_out); + riscv_obj_add_multiext_props(obj, qdict_out); riscv_obj_add_profiles_qdict(obj, qdict_out); /* Add our CPU boolean options too */ -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Commit 7e4f75cadf ("target/riscv/tcg: hide warn for named feats when disabling via priv_ver") changed the design of disable_priv_spec_isa_exts to not warn when disabling what we were calling "named features" at that time. Back in that time we were adding RVA22 profile support and we were dealing with a RVI innovation: named features. These can be define as cute names for pre-existing behavior/parameters, e.g. 'zic64b' means all cache blocks must have 64 bytes. They do get inserted in the riscv,isa but they are not "real" extensions because users shouldn't be setting them in the command line, or so we thought back then, and we attempted to model that by calling it "named features". This didn't age that well: ziccrse is a so called named feature as far as TCG goes, but then KVM had to treat it as a regular extension that can be user set and we made an exception: ziccrse is a named feature that is user set by KVM. "Named features" are regular extensions that might or might not be user set, and might or might not warrant special handling during realize() by setting other parameters. And we'll being treating them as such, which will culminate in the end of riscv_cpu_named_features[] array in the end. This reverts commit 7e4f75cadf44ee67809c7ca82645a289a5268966. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-5-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 13 +++---------- 1 file changed, 3 insertions(+), 10 deletions(-) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_disable_priv_spec_isa_exts(RISCVCPU *cpu) } isa_ext_update_enabled(cpu, edata->ext_enable_offset, false); - - /* - * Do not show user warnings for named features that users - * can't enable/disable in the command line. See commit - * 68c9e54bea for more info. - */ - if (cpu_cfg_offset_is_named_feat(edata->ext_enable_offset)) { - continue; - } #ifndef CONFIG_USER_ONLY warn_report("disabling %s extension for hart 0x%" PRIx64 " because privilege spec version does not match", @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_update_named_features(RISCVCPU *cpu) cpu->cfg.has_priv_1_13 = true; } + /* zic64b is 1.12 or later */ cpu->cfg.ext_zic64b = cpu->cfg.cbom_blocksize == 64 && cpu->cfg.cbop_blocksize == 64 && - cpu->cfg.cboz_blocksize == 64; + cpu->cfg.cboz_blocksize == 64 && + cpu->cfg.has_priv_1_12; cpu->cfg.ext_ssstateen = cpu->cfg.ext_smstateen; -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> We're using both isa_edata_arr[] and riscv_cpu_named_features[] to find an extension name based on a cfg offset. This is reminiscent of a past where isa_edata_arr[] didn't include entries for internal extensions. At this point we can use just isa_edata_arr[]. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-6-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static int cpu_cfg_ext_get_min_version(uint32_t ext_offset) static const char *cpu_cfg_ext_get_name(uint32_t ext_offset) { - const RISCVCPUMultiExtConfig *feat; const RISCVIsaExtData *edata; for (edata = isa_edata_arr; edata->name != NULL; edata++) { @@ -XXX,XX +XXX,XX @@ static const char *cpu_cfg_ext_get_name(uint32_t ext_offset) } } - for (feat = riscv_cpu_named_features; feat->name != NULL; feat++) { - if (feat->offset == ext_offset) { - return feat->name; - } - } - g_assert_not_reached(); } -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Deprecate riscv_cpu_enable_named_feat() by creating implied rules for 'sha' and 'ssstateen'. 'zic64' is always true given that our default block size is set to 64. With this change we homogeneize extension handling when enabling profiles. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-7-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 25 ++++++++++++++++++++++-- target/riscv/tcg/tcg-cpu.c | 40 -------------------------------------- 2 files changed, 23 insertions(+), 42 deletions(-) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static RISCVCPUImpliedExtsRule ZVKSG_IMPLIED = { }, }; +static RISCVCPUImpliedExtsRule SHA_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_sha), + .implied_misa_exts = RVH, + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_smstateen), + CPU_CFG_OFFSET(ext_ssstateen), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + static RISCVCPUImpliedExtsRule SSCFG_IMPLIED = { .ext = CPU_CFG_OFFSET(ext_ssccfg), .implied_multi_exts = { @@ -XXX,XX +XXX,XX @@ static RISCVCPUImpliedExtsRule SSCTR_IMPLIED = { }, }; +static RISCVCPUImpliedExtsRule SSSTATEEN_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_ssstateen), + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_smstateen), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + static RISCVCPUImpliedExtsRule ZVFBFA_IMPLIED = { .ext = CPU_CFG_OFFSET(ext_zvfbfa), .implied_multi_exts = { @@ -XXX,XX +XXX,XX @@ RISCVCPUImpliedExtsRule *riscv_multi_ext_implied_rules[] = { &ZVFBFA_IMPLIED, &ZVFBFMIN_IMPLIED, &ZVFBFWMA_IMPLIED, &ZVFH_IMPLIED, &ZVFHMIN_IMPLIED, &ZVKN_IMPLIED, &ZVKNC_IMPLIED, &ZVKNG_IMPLIED, &ZVKNHB_IMPLIED, - &ZVKS_IMPLIED, &ZVKSC_IMPLIED, &ZVKSG_IMPLIED, &SSCFG_IMPLIED, - &SUPM_IMPLIED, &SSPM_IMPLIED, &SMCTR_IMPLIED, &SSCTR_IMPLIED, + &ZVKS_IMPLIED, &ZVKSC_IMPLIED, &ZVKSG_IMPLIED, &SHA_IMPLIED, + &SSCFG_IMPLIED, &SUPM_IMPLIED, &SSPM_IMPLIED, &SMCTR_IMPLIED, + &SSCTR_IMPLIED, &SSSTATEEN_IMPLIED, NULL }; diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static const char *cpu_cfg_ext_get_name(uint32_t ext_offset) g_assert_not_reached(); } -static bool cpu_cfg_offset_is_named_feat(uint32_t ext_offset) -{ - const RISCVCPUMultiExtConfig *feat; - - for (feat = riscv_cpu_named_features; feat->name != NULL; feat++) { - if (feat->offset == ext_offset) { - return true; - } - } - - return false; -} - -static void riscv_cpu_enable_named_feat(RISCVCPU *cpu, uint32_t feat_offset) -{ - /* - * All other named features are already enabled - * in riscv_tcg_cpu_instance_init(). - */ - switch (feat_offset) { - case CPU_CFG_OFFSET(ext_zic64b): - cpu->cfg.cbom_blocksize = 64; - cpu->cfg.cbop_blocksize = 64; - cpu->cfg.cboz_blocksize = 64; - break; - case CPU_CFG_OFFSET(ext_sha): - if (!cpu_misa_ext_is_user_set(RVH)) { - riscv_cpu_write_misa_bit(cpu, RVH, true); - } - /* fallthrough */ - case CPU_CFG_OFFSET(ext_ssstateen): - cpu->cfg.ext_smstateen = true; - break; - } -} - static void cpu_bump_multi_ext_priv_ver(CPURISCVState *env, uint32_t ext_offset) { @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_set_profile(RISCVCPU *cpu, ext_offset = profile->ext_offsets[i]; if (profile->enabled) { - if (cpu_cfg_offset_is_named_feat(ext_offset)) { - riscv_cpu_enable_named_feat(cpu, ext_offset); - } - cpu_bump_multi_ext_priv_ver(&cpu->env, ext_offset); } -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> This array has no uses left. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-8-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 1 - target/riscv/cpu.c | 26 -------------------------- target/riscv/tcg/tcg-cpu.c | 4 ++-- 3 files changed, 2 insertions(+), 29 deletions(-) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct RISCVCPUMultiExtConfig { extern const RISCVCPUMultiExtConfig riscv_cpu_extensions[]; extern const RISCVCPUMultiExtConfig riscv_cpu_vendor_exts[]; extern const RISCVCPUMultiExtConfig riscv_cpu_experimental_exts[]; -extern const RISCVCPUMultiExtConfig riscv_cpu_named_features[]; typedef struct isa_ext_data { const char *name; diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const RISCVCPUMultiExtConfig riscv_cpu_experimental_exts[] = { { }, }; -/* - * 'Named features' is the name we give to extensions that we - * don't want to expose to users. They are either immutable - * (always enabled/disable) or they'll vary depending on - * the resulting CPU state. - * - * Some of them are always enabled depending on priv version - * of the CPU and are declared directly in isa_edata_arr[]. - * The ones listed here have special checks during finalize() - * time and require their own flags like regular extensions. - * See riscv_cpu_update_named_features() for more info. - */ -const RISCVCPUMultiExtConfig riscv_cpu_named_features[] = { - MULTI_EXT_CFG_BOOL("zic64b", ext_zic64b, true), - MULTI_EXT_CFG_BOOL("ssstateen", ext_ssstateen, true), - MULTI_EXT_CFG_BOOL("sha", ext_sha, true), - - /* - * 'ziccrse' has its own flag because the KVM driver - * wants to enable/disable it on its own accord. - */ - MULTI_EXT_CFG_BOOL("ziccrse", ext_ziccrse, true), - - { }, -}; - static void cpu_set_prop_err(RISCVCPU *cpu, const char *propname, Error **errp) { diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_disable_priv_spec_isa_exts(RISCVCPU *cpu) } } -static void riscv_cpu_update_named_features(RISCVCPU *cpu) +static void riscv_cpu_update_cfg(RISCVCPU *cpu) { if (cpu->env.priv_ver >= PRIV_VERSION_1_11_0) { cpu->cfg.has_priv_1_11 = true; @@ -XXX,XX +XXX,XX @@ void riscv_tcg_cpu_finalize_features(RISCVCPU *cpu, Error **errp) return; } - riscv_cpu_update_named_features(cpu); + riscv_cpu_update_cfg(cpu); riscv_cpu_validate_profiles(cpu); if (cpu->cfg.ext_smepmp && !cpu->cfg.pmp) { -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> The non-standard extensions, in this particular function the vendor extensions, are all riscv,isa names that starts with 'x'. In theory this is a bit slower than using riscv_cpu_vendor_exts (isa_edata_arr is longer) but riscv_cpu_update_misa_x() is executed only once during finalize(), i.e. not a hot path. We're accepting a tiny performance hit as as a tradeoff for the code simplication we'll have later by removing all riscv_cpu_* arrays. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-9-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_update_misa_c(RISCVCPU *cpu) static void riscv_cpu_update_misa_x(RISCVCPU *cpu) { CPURISCVState *env = &cpu->env; - const RISCVCPUMultiExtConfig *arr = riscv_cpu_vendor_exts; + const RISCVIsaExtData *edata; - for (int i = 0; arr[i].name != NULL; i++) { - if (isa_ext_is_enabled(cpu, arr[i].offset)) { + for (edata = isa_edata_arr; edata && edata->name; edata++) { + if (edata->name[0] == 'x' + && isa_ext_is_enabled(cpu, edata->ext_enable_offset)) { riscv_cpu_set_misa_ext(env, env->misa_ext | RVX); break; } -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Use isa_edata_arr[] directly instead of going through 3 different arrays to populate the unavailable KVM properties. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-10-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/kvm/kvm-cpu.c | 25 ++++++++++--------------- 1 file changed, 10 insertions(+), 15 deletions(-) diff --git a/target/riscv/kvm/kvm-cpu.c b/target/riscv/kvm/kvm-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/kvm/kvm-cpu.c +++ b/target/riscv/kvm/kvm-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_add_kvm_unavail_prop(Object *obj, const char *prop_name) NULL, (void *)prop_name); } -static void riscv_cpu_add_kvm_unavail_prop_array(Object *obj, - const RISCVCPUMultiExtConfig *array) -{ - const RISCVCPUMultiExtConfig *prop; - - g_assert(array); - - for (prop = array; prop && prop->name; prop++) { - riscv_cpu_add_kvm_unavail_prop(obj, prop->name); - } -} - static void kvm_riscv_add_cpu_user_properties(Object *cpu_obj) { + const RISCVIsaExtData *edata; int i; riscv_add_satp_mode_properties(cpu_obj); @@ -XXX,XX +XXX,XX @@ static void kvm_riscv_add_cpu_user_properties(Object *cpu_obj) NULL, multi_cfg); } - riscv_cpu_add_kvm_unavail_prop_array(cpu_obj, riscv_cpu_extensions); - riscv_cpu_add_kvm_unavail_prop_array(cpu_obj, riscv_cpu_vendor_exts); - riscv_cpu_add_kvm_unavail_prop_array(cpu_obj, riscv_cpu_experimental_exts); + /* + * Mark all isa_edata_arr properties that collides with + * a KVM property as unavailable. + */ + for (edata = isa_edata_arr; edata && edata->name; edata++) { + if (edata->prop_name) { + riscv_cpu_add_kvm_unavail_prop(cpu_obj, edata->prop_name); + } + } /* We don't have the needed KVM support for profiles */ for (i = 0; riscv_profiles[i] != NULL; i++) { -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Use isa_edata_arr[] to enable all feasible extensions. Filter experimental and vendor extensions by checking if the riscv,isa or the prop name starts with 'x'. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-11-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_init_max_cpu_extensions(Object *obj) { RISCVCPU *cpu = RISCV_CPU(obj); CPURISCVState *env = &cpu->env; - const RISCVCPUMultiExtConfig *prop; + const RISCVIsaExtData *edata; /* Enable RVG and RVV that are disabled by default */ riscv_cpu_set_misa_ext(env, env->misa_ext | RVB | RVG | RVV); - for (prop = riscv_cpu_extensions; prop && prop->name; prop++) { - isa_ext_update_enabled(cpu, prop->offset, true); + for (edata = isa_edata_arr; edata && edata->name; edata++) { + if (edata->name[0] == 'x' + || (edata->prop_name && edata->prop_name[0] == 'x')) { + continue; + } + + isa_ext_update_enabled(cpu, edata->ext_enable_offset, true); } /* -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> The cpu_get_multi_ext_cfg/cpu_set_multi_ext_cfg callbacks are using a RISCVCPUMultiExtConfig pointer as opaque, but internally we're just using multi_ext_cfg->offset. Use multi_ext_cfg->offset as opaque instead. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-12-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_add_profiles(Object *cpu_obj) static void cpu_set_multi_ext_cfg(Object *obj, Visitor *v, const char *name, void *opaque, Error **errp) { - const RISCVCPUMultiExtConfig *multi_ext_cfg = opaque; RISCVCPU *cpu = RISCV_CPU(obj); + uint32_t cfg_offset = *(uint32_t *)opaque; bool vendor_cpu = riscv_cpu_is_vendor(obj); bool prev_val, value; @@ -XXX,XX +XXX,XX @@ static void cpu_set_multi_ext_cfg(Object *obj, Visitor *v, const char *name, return; } - cpu_cfg_ext_add_user_opt(multi_ext_cfg->offset, value); + cpu_cfg_ext_add_user_opt(cfg_offset, value); - prev_val = isa_ext_is_enabled(cpu, multi_ext_cfg->offset); + prev_val = isa_ext_is_enabled(cpu, cfg_offset); if (value == prev_val) { return; @@ -XXX,XX +XXX,XX @@ static void cpu_set_multi_ext_cfg(Object *obj, Visitor *v, const char *name, } if (value) { - cpu_bump_multi_ext_priv_ver(&cpu->env, multi_ext_cfg->offset); + cpu_bump_multi_ext_priv_ver(&cpu->env, cfg_offset); } - isa_ext_update_enabled(cpu, multi_ext_cfg->offset, value); + isa_ext_update_enabled(cpu, cfg_offset, value); } static void cpu_get_multi_ext_cfg(Object *obj, Visitor *v, const char *name, void *opaque, Error **errp) { - const RISCVCPUMultiExtConfig *multi_ext_cfg = opaque; - bool value = isa_ext_is_enabled(RISCV_CPU(obj), multi_ext_cfg->offset); + uint32_t cfg_offset = *(uint32_t *)opaque; + bool value = isa_ext_is_enabled(RISCV_CPU(obj), cfg_offset); visit_type_bool(v, name, &value, errp); } @@ -XXX,XX +XXX,XX @@ static void cpu_add_multi_ext_prop(Object *cpu_obj, object_property_add(cpu_obj, multi_cfg->name, "bool", cpu_get_multi_ext_cfg, cpu_set_multi_ext_cfg, - NULL, (void *)multi_cfg); + NULL, (void *)&multi_cfg->offset); if (!generic_cpu) { return; -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Do not rely on riscv_cpu_* arrays to set rv32/rv64 CPU defaults - add them to the CPU definition like we do with all other CPUs (aside from 'max'). Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-13-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 40 ++++++++++++++++++++++++++++++++++++++ target/riscv/tcg/tcg-cpu.c | 14 ------------- 2 files changed, 40 insertions(+), 14 deletions(-) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static const TypeInfo riscv_cpu_type_infos[] = { DEFINE_RISCV_CPU(TYPE_RISCV_CPU_BASE32, TYPE_RISCV_DYNAMIC_CPU, .cfg.max_satp_mode = VM_1_10_SV32, .misa_mxl_max = MXL_RV32, + + /* Default extensions as of QEMU 11.1. */ + .cfg.ext_zicbom = true, + .cfg.ext_zicbop = true, + .cfg.ext_zicboz = true, + .cfg.ext_zicntr = true, + .cfg.ext_zicsr = true, + .cfg.ext_zifencei = true, + .cfg.ext_zihintntl = true, + .cfg.ext_zihintpause = true, + .cfg.ext_zihpm = true, + .cfg.ext_zawrs = true, + .cfg.ext_zfa = true, + .cfg.ext_zba = true, + .cfg.ext_zbb = true, + .cfg.ext_zbc = true, + .cfg.ext_zbs = true, + .cfg.ext_sstc = true, + .cfg.ext_svadu = true, + .cfg.ext_svvptc = true, ), DEFINE_RISCV_CPU(TYPE_RISCV_CPU_IBEX, TYPE_RISCV_VENDOR_CPU, @@ -XXX,XX +XXX,XX @@ static const TypeInfo riscv_cpu_type_infos[] = { DEFINE_RISCV_CPU(TYPE_RISCV_CPU_BASE64, TYPE_RISCV_DYNAMIC_CPU, .cfg.max_satp_mode = VM_1_10_SV57, .misa_mxl_max = MXL_RV64, + + /* Default extensions as of QEMU 11.1. */ + .cfg.ext_zicbom = true, + .cfg.ext_zicbop = true, + .cfg.ext_zicboz = true, + .cfg.ext_zicntr = true, + .cfg.ext_zicsr = true, + .cfg.ext_zifencei = true, + .cfg.ext_zihintntl = true, + .cfg.ext_zihintpause = true, + .cfg.ext_zihpm = true, + .cfg.ext_zawrs = true, + .cfg.ext_zfa = true, + .cfg.ext_zba = true, + .cfg.ext_zbb = true, + .cfg.ext_zbc = true, + .cfg.ext_zbs = true, + .cfg.ext_sstc = true, + .cfg.ext_svadu = true, + .cfg.ext_svvptc = true, ), DEFINE_RISCV_CPU(TYPE_RISCV_CPU_SIFIVE_E51, TYPE_RISCV_CPU_SIFIVE_E, diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void cpu_get_multi_ext_cfg(Object *obj, Visitor *v, const char *name, static void cpu_add_multi_ext_prop(Object *cpu_obj, const RISCVCPUMultiExtConfig *multi_cfg) { - bool generic_cpu = riscv_cpu_is_generic(cpu_obj); - object_property_add(cpu_obj, multi_cfg->name, "bool", cpu_get_multi_ext_cfg, cpu_set_multi_ext_cfg, NULL, (void *)&multi_cfg->offset); - - if (!generic_cpu) { - return; - } - - /* - * Set def val directly instead of using - * object_property_set_bool() to save the set() - * callback hash for user inputs. - */ - isa_ext_update_enabled(RISCV_CPU(cpu_obj), multi_cfg->offset, - multi_cfg->enabled); } static void riscv_cpu_add_multiext_prop_array(Object *obj, -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> This change has been done twice now: one in riscv-qmp-cmds, another in the KVM. We're now ready to do it for TCG. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-14-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 34 ++++++++++------------------------ 1 file changed, 10 insertions(+), 24 deletions(-) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void cpu_get_multi_ext_cfg(Object *obj, Visitor *v, const char *name, visit_type_bool(v, name, &value, errp); } -static void cpu_add_multi_ext_prop(Object *cpu_obj, - const RISCVCPUMultiExtConfig *multi_cfg) -{ - object_property_add(cpu_obj, multi_cfg->name, "bool", - cpu_get_multi_ext_cfg, - cpu_set_multi_ext_cfg, - NULL, (void *)&multi_cfg->offset); -} - -static void riscv_cpu_add_multiext_prop_array(Object *obj, - const RISCVCPUMultiExtConfig *array) -{ - const RISCVCPUMultiExtConfig *prop; - - g_assert(array); - - for (prop = array; prop && prop->name; prop++) { - cpu_add_multi_ext_prop(obj, prop); - } -} - /* * Add CPU properties with user-facing flags. * @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_add_multiext_prop_array(Object *obj, */ static void riscv_cpu_add_user_properties(Object *obj) { + const RISCVIsaExtData *edata; + #ifndef CONFIG_USER_ONLY riscv_add_satp_mode_properties(obj); #endif riscv_cpu_add_misa_properties(obj); - riscv_cpu_add_multiext_prop_array(obj, riscv_cpu_extensions); - riscv_cpu_add_multiext_prop_array(obj, riscv_cpu_vendor_exts); - riscv_cpu_add_multiext_prop_array(obj, riscv_cpu_experimental_exts); + for (edata = isa_edata_arr; edata && edata->name; edata++) { + if (edata->prop_name) { + object_property_add(obj, edata->prop_name, "bool", + cpu_get_multi_ext_cfg, + cpu_set_multi_ext_cfg, + NULL, (void *)&edata->ext_enable_offset); + } + } riscv_cpu_add_profiles(obj); } -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> There is no more uses left for these arrays. isa_edata_arr[] is doing everything we need, making our lives a little easier when adding new extensions. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-15-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 10 --- target/riscv/cpu.c | 159 --------------------------------------------- 2 files changed, 169 deletions(-) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ bool isa_ext_is_enabled(RISCVCPU *cpu, uint32_t ext_offset); void riscv_cpu_set_misa_ext(CPURISCVState *env, uint32_t ext); bool riscv_cpu_is_vendor(Object *cpu_obj); -typedef struct RISCVCPUMultiExtConfig { - const char *name; - uint32_t offset; - bool enabled; -} RISCVCPUMultiExtConfig; - -extern const RISCVCPUMultiExtConfig riscv_cpu_extensions[]; -extern const RISCVCPUMultiExtConfig riscv_cpu_vendor_exts[]; -extern const RISCVCPUMultiExtConfig riscv_cpu_experimental_exts[]; - typedef struct isa_ext_data { const char *name; const char *prop_name; diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const char *riscv_get_misa_ext_description(uint32_t bit) return val; } -#define MULTI_EXT_CFG_BOOL(_name, _prop, _defval) \ - {.name = _name, .offset = CPU_CFG_OFFSET(_prop), \ - .enabled = _defval} - -const RISCVCPUMultiExtConfig riscv_cpu_extensions[] = { - /* Defaults for standard extensions */ - MULTI_EXT_CFG_BOOL("sscofpmf", ext_sscofpmf, false), - MULTI_EXT_CFG_BOOL("smcntrpmf", ext_smcntrpmf, false), - MULTI_EXT_CFG_BOOL("smcsrind", ext_smcsrind, false), - MULTI_EXT_CFG_BOOL("smcdeleg", ext_smcdeleg, false), - MULTI_EXT_CFG_BOOL("sscsrind", ext_sscsrind, false), - MULTI_EXT_CFG_BOOL("ssccfg", ext_ssccfg, false), - MULTI_EXT_CFG_BOOL("smctr", ext_smctr, false), - MULTI_EXT_CFG_BOOL("ssctr", ext_ssctr, false), - MULTI_EXT_CFG_BOOL("zifencei", ext_zifencei, true), - MULTI_EXT_CFG_BOOL("zicfilp", ext_zicfilp, false), - MULTI_EXT_CFG_BOOL("zicfiss", ext_zicfiss, false), - MULTI_EXT_CFG_BOOL("zicsr", ext_zicsr, true), - MULTI_EXT_CFG_BOOL("zihintntl", ext_zihintntl, true), - MULTI_EXT_CFG_BOOL("zihintpause", ext_zihintpause, true), - MULTI_EXT_CFG_BOOL("zimop", ext_zimop, false), - MULTI_EXT_CFG_BOOL("zcmop", ext_zcmop, false), - MULTI_EXT_CFG_BOOL("zacas", ext_zacas, false), - MULTI_EXT_CFG_BOOL("zama16b", ext_zama16b, false), - MULTI_EXT_CFG_BOOL("zabha", ext_zabha, false), - MULTI_EXT_CFG_BOOL("zaamo", ext_zaamo, false), - MULTI_EXT_CFG_BOOL("zalasr", ext_zalasr, false), - MULTI_EXT_CFG_BOOL("zalrsc", ext_zalrsc, false), - MULTI_EXT_CFG_BOOL("zawrs", ext_zawrs, true), - MULTI_EXT_CFG_BOOL("zfa", ext_zfa, true), - MULTI_EXT_CFG_BOOL("zfbfmin", ext_zfbfmin, false), - MULTI_EXT_CFG_BOOL("zfh", ext_zfh, false), - MULTI_EXT_CFG_BOOL("zfhmin", ext_zfhmin, false), - MULTI_EXT_CFG_BOOL("zve32f", ext_zve32f, false), - MULTI_EXT_CFG_BOOL("zve32x", ext_zve32x, false), - MULTI_EXT_CFG_BOOL("zve64f", ext_zve64f, false), - MULTI_EXT_CFG_BOOL("zve64d", ext_zve64d, false), - MULTI_EXT_CFG_BOOL("zve64x", ext_zve64x, false), - MULTI_EXT_CFG_BOOL("zvfbfa", ext_zvfbfa, false), - MULTI_EXT_CFG_BOOL("zvfbfmin", ext_zvfbfmin, false), - MULTI_EXT_CFG_BOOL("zvfbfwma", ext_zvfbfwma, false), - MULTI_EXT_CFG_BOOL("zvfh", ext_zvfh, false), - MULTI_EXT_CFG_BOOL("zvfhmin", ext_zvfhmin, false), - MULTI_EXT_CFG_BOOL("sstc", ext_sstc, true), - MULTI_EXT_CFG_BOOL("ssnpm", ext_ssnpm, false), - MULTI_EXT_CFG_BOOL("sspm", ext_sspm, false), - MULTI_EXT_CFG_BOOL("supm", ext_supm, false), - - MULTI_EXT_CFG_BOOL("smaia", ext_smaia, false), - MULTI_EXT_CFG_BOOL("smdbltrp", ext_smdbltrp, false), - MULTI_EXT_CFG_BOOL("smepmp", ext_smepmp, false), - MULTI_EXT_CFG_BOOL("smpmpmt", ext_smpmpmt, false), - MULTI_EXT_CFG_BOOL("smrnmi", ext_smrnmi, false), - MULTI_EXT_CFG_BOOL("smmpm", ext_smmpm, false), - MULTI_EXT_CFG_BOOL("smnpm", ext_smnpm, false), - MULTI_EXT_CFG_BOOL("smstateen", ext_smstateen, false), - MULTI_EXT_CFG_BOOL("ssaia", ext_ssaia, false), - MULTI_EXT_CFG_BOOL("ssdbltrp", ext_ssdbltrp, false), - MULTI_EXT_CFG_BOOL("svade", ext_svade, false), - MULTI_EXT_CFG_BOOL("svadu", ext_svadu, true), - MULTI_EXT_CFG_BOOL("svinval", ext_svinval, false), - MULTI_EXT_CFG_BOOL("svnapot", ext_svnapot, false), - MULTI_EXT_CFG_BOOL("svpbmt", ext_svpbmt, false), - MULTI_EXT_CFG_BOOL("svrsw60t59b", ext_svrsw60t59b, false), - MULTI_EXT_CFG_BOOL("svvptc", ext_svvptc, true), - - MULTI_EXT_CFG_BOOL("zicntr", ext_zicntr, true), - MULTI_EXT_CFG_BOOL("zihpm", ext_zihpm, true), - MULTI_EXT_CFG_BOOL("zilsd", ext_zilsd, false), - - MULTI_EXT_CFG_BOOL("zba", ext_zba, true), - MULTI_EXT_CFG_BOOL("zbb", ext_zbb, true), - MULTI_EXT_CFG_BOOL("zbc", ext_zbc, true), - MULTI_EXT_CFG_BOOL("zbkb", ext_zbkb, false), - MULTI_EXT_CFG_BOOL("zbkc", ext_zbkc, false), - MULTI_EXT_CFG_BOOL("zbkx", ext_zbkx, false), - MULTI_EXT_CFG_BOOL("zbs", ext_zbs, true), - MULTI_EXT_CFG_BOOL("zk", ext_zk, false), - MULTI_EXT_CFG_BOOL("zkn", ext_zkn, false), - MULTI_EXT_CFG_BOOL("zknd", ext_zknd, false), - MULTI_EXT_CFG_BOOL("zkne", ext_zkne, false), - MULTI_EXT_CFG_BOOL("zknh", ext_zknh, false), - MULTI_EXT_CFG_BOOL("zkr", ext_zkr, false), - MULTI_EXT_CFG_BOOL("zks", ext_zks, false), - MULTI_EXT_CFG_BOOL("zksed", ext_zksed, false), - MULTI_EXT_CFG_BOOL("zksh", ext_zksh, false), - MULTI_EXT_CFG_BOOL("zkt", ext_zkt, false), - MULTI_EXT_CFG_BOOL("ztso", ext_ztso, false), - - MULTI_EXT_CFG_BOOL("zdinx", ext_zdinx, false), - MULTI_EXT_CFG_BOOL("zfinx", ext_zfinx, false), - MULTI_EXT_CFG_BOOL("zhinx", ext_zhinx, false), - MULTI_EXT_CFG_BOOL("zhinxmin", ext_zhinxmin, false), - - MULTI_EXT_CFG_BOOL("zicbom", ext_zicbom, true), - MULTI_EXT_CFG_BOOL("zicbop", ext_zicbop, true), - MULTI_EXT_CFG_BOOL("zicboz", ext_zicboz, true), - - MULTI_EXT_CFG_BOOL("zmmul", ext_zmmul, false), - - MULTI_EXT_CFG_BOOL("zca", ext_zca, false), - MULTI_EXT_CFG_BOOL("zcb", ext_zcb, false), - MULTI_EXT_CFG_BOOL("zcd", ext_zcd, false), - MULTI_EXT_CFG_BOOL("zce", ext_zce, false), - MULTI_EXT_CFG_BOOL("zcf", ext_zcf, false), - MULTI_EXT_CFG_BOOL("zcmp", ext_zcmp, false), - MULTI_EXT_CFG_BOOL("zcmt", ext_zcmt, false), - MULTI_EXT_CFG_BOOL("zicond", ext_zicond, false), - MULTI_EXT_CFG_BOOL("zclsd", ext_zclsd, false), - - /* Vector cryptography extensions */ - MULTI_EXT_CFG_BOOL("zvbb", ext_zvbb, false), - MULTI_EXT_CFG_BOOL("zvbc", ext_zvbc, false), - MULTI_EXT_CFG_BOOL("zvkb", ext_zvkb, false), - MULTI_EXT_CFG_BOOL("zvkg", ext_zvkg, false), - MULTI_EXT_CFG_BOOL("zvkned", ext_zvkned, false), - MULTI_EXT_CFG_BOOL("zvknha", ext_zvknha, false), - MULTI_EXT_CFG_BOOL("zvknhb", ext_zvknhb, false), - MULTI_EXT_CFG_BOOL("zvksed", ext_zvksed, false), - MULTI_EXT_CFG_BOOL("zvksh", ext_zvksh, false), - MULTI_EXT_CFG_BOOL("zvkt", ext_zvkt, false), - MULTI_EXT_CFG_BOOL("zvkn", ext_zvkn, false), - MULTI_EXT_CFG_BOOL("zvknc", ext_zvknc, false), - MULTI_EXT_CFG_BOOL("zvkng", ext_zvkng, false), - MULTI_EXT_CFG_BOOL("zvks", ext_zvks, false), - MULTI_EXT_CFG_BOOL("zvksc", ext_zvksc, false), - MULTI_EXT_CFG_BOOL("zvksg", ext_zvksg, false), - - { }, -}; - -const RISCVCPUMultiExtConfig riscv_cpu_vendor_exts[] = { - MULTI_EXT_CFG_BOOL("xtheadba", ext_xtheadba, false), - MULTI_EXT_CFG_BOOL("xtheadbb", ext_xtheadbb, false), - MULTI_EXT_CFG_BOOL("xtheadbs", ext_xtheadbs, false), - MULTI_EXT_CFG_BOOL("xtheadcmo", ext_xtheadcmo, false), - MULTI_EXT_CFG_BOOL("xtheadcondmov", ext_xtheadcondmov, false), - MULTI_EXT_CFG_BOOL("xtheadfmemidx", ext_xtheadfmemidx, false), - MULTI_EXT_CFG_BOOL("xtheadfmv", ext_xtheadfmv, false), - MULTI_EXT_CFG_BOOL("xtheadmac", ext_xtheadmac, false), - MULTI_EXT_CFG_BOOL("xtheadmemidx", ext_xtheadmemidx, false), - MULTI_EXT_CFG_BOOL("xtheadmempair", ext_xtheadmempair, false), - MULTI_EXT_CFG_BOOL("xtheadsync", ext_xtheadsync, false), - MULTI_EXT_CFG_BOOL("xventanacondops", ext_XVentanaCondOps, false), - MULTI_EXT_CFG_BOOL("xmipscbop", ext_xmipscbop, false), - MULTI_EXT_CFG_BOOL("xmipscmov", ext_xmipscmov, false), - MULTI_EXT_CFG_BOOL("xmipslsp", ext_xmipslsp, false), - MULTI_EXT_CFG_BOOL("xlrbr", ext_xlrbr, false), - - { }, -}; - -/* These are experimental so mark with 'x-' */ -const RISCVCPUMultiExtConfig riscv_cpu_experimental_exts[] = { - MULTI_EXT_CFG_BOOL("x-svukte", ext_svukte, false), - - { }, -}; - static void cpu_set_prop_err(RISCVCPU *cpu, const char *propname, Error **errp) { -- 2.53.0 From: Fangyu Yu <fangyu.yu@linux.alibaba.com> Fix IOCOUNTINH.CY toggle detection by comparing normalized CY bit rather than XORing whole register with boolean. Fixes: 2cf2a6c027ba ("hw/riscv/riscv-iommu: add IOCOUNTINH mmio writes") Signed-off-by: Fangyu Yu <fangyu.yu@linux.alibaba.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Nutty Liu <nutty.liu@hotmail.com> Message-ID: <20260509074941.99295-1-fangyu.yu@linux.alibaba.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu-hpm.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/riscv/riscv-iommu-hpm.c b/hw/riscv/riscv-iommu-hpm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu-hpm.c +++ b/hw/riscv/riscv-iommu-hpm.c @@ -XXX,XX +XXX,XX @@ void riscv_iommu_process_iocntinh_cy(RISCVIOMMUState *s, bool prev_cy_inh) s, RISCV_IOMMU_REG_IOCOUNTINH); /* We only need to process CY bit toggle. */ - if (!(inhibit ^ prev_cy_inh)) { + bool cy_inh = !!(inhibit & RISCV_IOMMU_IOCOUNTINH_CY); + if (cy_inh == prev_cy_inh) { return; } -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> The priv spec defines, for RV64, that the upper 10 bits of pmpaddr0-pmpaddr63 are WARL and are supposed to be cleared. After this patch, using the bug reproducer in [1], writing ffffffffffffffff in pmpaddr0 and reading it back now results in 003fffffffffffff. Here's the 'diff -cp' dump before and after this change: *************** IN: *** 5272,5278 **** pmpcfg10 0000000000000000 pmpcfg12 0000000000000000 pmpcfg14 0000000000000000 ! pmpaddr0 ffffffffffffffff pmpaddr1 0000000000000000 pmpaddr2 0000000000000000 pmpaddr3 0000000000000000 Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260514123342.2139464-1-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException read_pmpaddr(CPURISCVState *env, int csrno, target_ulong *val) { *val = pmpaddr_csr_read(env, csrno - CSR_PMPADDR0); + + /* + * For RV64, bits 54-63 of the address registers + * PMPAADDR(0-63) is a WARL zero field (priv spec, + * section "Physical Memory Protection CSRs"). + * + * We'll have to add an annoying TARGET_RISCV64 gate + * here to avoid complaints about masking bits 0-53 + * of a potential 32 bit target_ulong '*var'. + */ +#ifdef TARGET_RISCV64 + if (env->misa_mxl == MXL_RV64 + && csrno >= CSR_PMPADDR0 && csrno <= CSR_PMPADDR63) { + target_ulong read_mask = MAKE_64BIT_MASK(0, 54); + *val &= read_mask; + } +#endif return RISCV_EXCP_NONE; } -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> In build_rimt(), the calculation of `num_ids` for the ID mapping array incorrectly uses the same formula (`0xffff - s->pci_iommu_bdf`) for both System IOMMU and PCI IOMMU topologies. For a System IOMMU, `s->pci_iommu_bdf` is 0. This results in a `num_ids` value of 0xffff. Since the source ID base starts at 0, the mapping only covers Requester IDs from 0 to 0xfffe. The final valid PCI Requester ID (0xffff) is erroneously omitted from the RIMT table. Fix this by decoupling the `num_ids` calculation. For System IOMMUs, explicitly set `num_ids` to 0x10000 to cover the entire PCI Requester ID space. This issue was discovered and reported by SpecHunter, an AI-driven architecture specification analysis tool. Link: https://github.com/yizishun/rv-isa-sec/blob/c78dacf66c8acd677b3538c837fde310bb71a97b/output/riscv-server-platform/pr-102/qemu.txt#L32 Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512062310.348208-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt-acpi-build.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/riscv/virt-acpi-build.c b/hw/riscv/virt-acpi-build.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt-acpi-build.c +++ b/hw/riscv/virt-acpi-build.c @@ -XXX,XX +XXX,XX @@ static void build_rimt(GArray *table_data, BIOSLinker *linker, range = &g_array_index(iommu_idmaps, AcpiRimtIdMapping, i); if (virt_is_iommu_sys_enabled(s)) { range->source_id_base = 0; + range->num_ids = 0x10000; } else { range->source_id_base = s->pci_iommu_bdf + 1; + range->num_ids = 0xffff - s->pci_iommu_bdf; } - range->num_ids = 0xffff - s->pci_iommu_bdf; build_rimt_id_mapping(table_data, range->source_id_base, range->num_ids, iommu_offset); } -- 2.53.0 From: Portia Stephens <portias@oss.tenstorrent.com> The counter value was not being bitshifted for a hpmcounterh read resulting in hpmcounterh returning the bottom 32-bits. Fixes: cfc96df65e01 ("target/riscv: Remove upper_half from riscv_pmu_ctr_get_fixed_counters_val") Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3498 Cc: qemu-stable@nongnu.org Signed-off-by: Portia Stephens <portias@oss.tenstorrent.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260519043352.3685866-1-stephensportia@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ RISCVException riscv_pmu_read_ctr(CPURISCVState *env, target_ulong *val, */ if (riscv_pmu_ctr_monitor_cycles(env, ctr_idx) || riscv_pmu_ctr_monitor_instructions(env, ctr_idx)) { - *val = riscv_pmu_ctr_get_fixed_counters_val(env, ctr_idx) - - ctr_prev + ctr_val; + uint64_t cntr = riscv_pmu_ctr_get_fixed_counters_val(env, ctr_idx) - + ctr_prev + ctr_val; + *val = extract64(cntr, start, length); } else { *val = ctr_val; } -- 2.53.0 From: Jim Shu <jim.shu@sifive.com> According to the AIA spec ch4.7 ("Precise effects on interrupt-pending bits"), pending bit of APLIC should be set/cleared whenever the rectified input value is high/low in the both level-trigger mode and direct delivery mode. Currently, QEMU APLIC only clears the pending bit when interrupt is claimed in APLIC, but not clears it when the rectified input value is low. (e.g. IRQ source signal is low in the LEVEL_HIGH/Level1 mode). The software may receive an additional IRQ if the peripheral triggers one after the software clears the APLIC IRQ but before it clears the peripheral's IRQ. Thus, we also clear the pending bit via the rectified input value in the level-trigger mode. This change doesn't affect MSI delivery mode. Calling riscv_aplic_msi_irq_update() when IRQ pending is low will do nothing. Signed-off-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Chao Liu <chao.liu.zevorn@gmail.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260428160103.3551125-2-jim.shu@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/intc/riscv_aplic.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/hw/intc/riscv_aplic.c b/hw/intc/riscv_aplic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/riscv_aplic.c +++ b/hw/intc/riscv_aplic.c @@ -XXX,XX +XXX,XX @@ static void riscv_aplic_request(void *opaque, int irq, int level) } break; case APLIC_SOURCECFG_SM_LEVEL_HIGH: - if ((level > 0) && !(state & APLIC_ISTATE_PENDING)) { - riscv_aplic_set_pending_raw(aplic, irq, true); + if ((level > 0) != !!(state & APLIC_ISTATE_PENDING)) { + riscv_aplic_set_pending_raw(aplic, irq, level > 0); update = true; } break; case APLIC_SOURCECFG_SM_LEVEL_LOW: - if ((level <= 0) && !(state & APLIC_ISTATE_PENDING)) { - riscv_aplic_set_pending_raw(aplic, irq, true); + if ((level <= 0) != !!(state & APLIC_ISTATE_PENDING)) { + riscv_aplic_set_pending_raw(aplic, irq, level <= 0); update = true; } break; -- 2.53.0 From: Jim Shu <jim.shu@sifive.com> Clearing APLIC registers and qemu_irq in the reset function Signed-off-by: Jim Shu <jim.shu@sifive.com> Signed-off-by: Fea.Wang <fea.wang@sifive.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260428160103.3551125-3-jim.shu@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/intc/riscv_aplic.c | 45 ++++++++++++++++++++++++++++++++++++++----- 1 file changed, 40 insertions(+), 5 deletions(-) diff --git a/hw/intc/riscv_aplic.c b/hw/intc/riscv_aplic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/riscv_aplic.c +++ b/hw/intc/riscv_aplic.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps riscv_aplic_ops = { } }; +static void riscv_aplic_reset_enter(Object *obj, ResetType type) +{ + RISCVAPLICState *aplic = RISCV_APLIC(obj); + int i; + + aplic->domaincfg = 0; + memset(aplic->sourcecfg, 0, sizeof(uint32_t) * aplic->num_irqs); + memset(aplic->target, 0, sizeof(uint32_t) * aplic->num_irqs); + if (!aplic->msimode) { + for (i = 0; i < aplic->num_irqs; i++) { + aplic->target[i] = 1; + } + } + + for (i = 0; i < aplic->num_irqs ; i++) { + riscv_aplic_set_enabled_raw(aplic, i, false); + } + + /* Need to unlock [ms]msicfgaddrh.L */ + aplic->mmsicfgaddr = 0; + aplic->mmsicfgaddrH = 0; + aplic->smsicfgaddr = 0; + aplic->smsicfgaddrH = 0; + + if (!aplic->msimode) { + /* Reset IDC registers only in non-MSI mode */ + for (i = 0; i < aplic->num_harts; i++) { + aplic->idelivery[i] = 0; + aplic->iforce[i] = 0; + aplic->ithreshold[i] = 0; + } + + for (i = 0; i < aplic->num_harts; i++) { + qemu_irq_lower(aplic->external_irqs[i]); + } + } +} + static void riscv_aplic_realize(DeviceState *dev, Error **errp) { uint32_t i; @@ -XXX,XX +XXX,XX @@ static void riscv_aplic_realize(DeviceState *dev, Error **errp) aplic->sourcecfg = g_new0(uint32_t, aplic->num_irqs); aplic->state = g_new0(uint32_t, aplic->num_irqs); aplic->target = g_new0(uint32_t, aplic->num_irqs); - if (!aplic->msimode) { - for (i = 0; i < aplic->num_irqs; i++) { - aplic->target[i] = 1; - } - } aplic->idelivery = g_new0(uint32_t, aplic->num_harts); aplic->iforce = g_new0(uint32_t, aplic->num_harts); aplic->ithreshold = g_new0(uint32_t, aplic->num_harts); @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_riscv_aplic = { static void riscv_aplic_class_init(ObjectClass *klass, const void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); device_class_set_props(dc, riscv_aplic_properties); dc->realize = riscv_aplic_realize; + rc->phases.enter = riscv_aplic_reset_enter; dc->vmsd = &vmstate_riscv_aplic; } -- 2.53.0 From: Jim Shu <jim.shu@sifive.com> Clearing IMSIC registers and qemu_irq in the reset function Signed-off-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260428160103.3551125-4-jim.shu@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/intc/riscv_imsic.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/hw/intc/riscv_imsic.c b/hw/intc/riscv_imsic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/riscv_imsic.c +++ b/hw/intc/riscv_imsic.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps riscv_imsic_ops = { } }; +static void riscv_imsic_reset_enter(Object *obj, ResetType type) +{ + RISCVIMSICState *imsic = RISCV_IMSIC(obj); + int i; + + memset(imsic->eidelivery, 0, sizeof(uint32_t) * imsic->num_pages); + memset(imsic->eithreshold, 0, sizeof(uint32_t) * imsic->num_pages); + + for (i = 0; i < imsic->num_eistate; i++) { + imsic->eistate[i] &= ~IMSIC_EISTATE_ENABLED; + } + + for (i = 0; i < imsic->num_pages; i++) { + qemu_irq_lower(imsic->external_irqs[i]); + } +} + static void riscv_imsic_realize(DeviceState *dev, Error **errp) { RISCVIMSICState *imsic = RISCV_IMSIC(dev); @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_riscv_imsic = { static void riscv_imsic_class_init(ObjectClass *klass, const void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); device_class_set_props(dc, riscv_imsic_properties); dc->realize = riscv_imsic_realize; + rc->phases.enter = riscv_imsic_reset_enter; dc->vmsd = &vmstate_riscv_imsic; } -- 2.53.0 From: Jim Shu <jim.shu@sifive.com> Add the trace events for APLIC read/write functions. Signed-off-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260428160103.3551125-5-jim.shu@sifive.com> [ Changes by AF: - Init val to zero to avoid uninitialised build errors ] Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/intc/riscv_aplic.c | 63 ++++++++++++++++++++++++++----------------- hw/intc/trace-events | 4 +++ 2 files changed, 42 insertions(+), 25 deletions(-) diff --git a/hw/intc/riscv_aplic.c b/hw/intc/riscv_aplic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/riscv_aplic.c +++ b/hw/intc/riscv_aplic.c @@ -XXX,XX +XXX,XX @@ #include "system/tcg.h" #include "kvm/kvm_riscv.h" #include "migration/vmstate.h" +#include "trace.h" #define APLIC_MAX_IDC (1UL << 14) #define APLIC_MAX_SOURCE 1024 @@ -XXX,XX +XXX,XX @@ static void riscv_aplic_request(void *opaque, int irq, int level) static uint64_t riscv_aplic_read(void *opaque, hwaddr addr, unsigned size) { uint32_t irq, word, idc; + uint64_t val = 0; RISCVAPLICState *aplic = opaque; /* Reads must be 4 byte words */ @@ -XXX,XX +XXX,XX @@ static uint64_t riscv_aplic_read(void *opaque, hwaddr addr, unsigned size) } if (addr == APLIC_DOMAINCFG) { - return APLIC_DOMAINCFG_RDONLY | aplic->domaincfg | - (aplic->msimode ? APLIC_DOMAINCFG_DM : 0); + val = APLIC_DOMAINCFG_RDONLY | aplic->domaincfg | + (aplic->msimode ? APLIC_DOMAINCFG_DM : 0); } else if ((APLIC_SOURCECFG_BASE <= addr) && (addr < (APLIC_SOURCECFG_BASE + (aplic->num_irqs - 1) * 4))) { irq = ((addr - APLIC_SOURCECFG_BASE) >> 2) + 1; - return aplic->sourcecfg[irq]; + val = aplic->sourcecfg[irq]; } else if (aplic->mmode && aplic->msimode && (addr == APLIC_MMSICFGADDR)) { - return aplic->mmsicfgaddr; + val = aplic->mmsicfgaddr; } else if (aplic->mmode && aplic->msimode && (addr == APLIC_MMSICFGADDRH)) { - return aplic->mmsicfgaddrH; + val = aplic->mmsicfgaddrH; } else if (aplic->mmode && aplic->msimode && (addr == APLIC_SMSICFGADDR)) { /* @@ -XXX,XX +XXX,XX @@ static uint64_t riscv_aplic_read(void *opaque, hwaddr addr, unsigned size) * only zero in at least one of the supervisor-level child * domains). */ - return (aplic->num_children) ? aplic->smsicfgaddr : 0; + val = (aplic->num_children) ? aplic->smsicfgaddr : 0; } else if (aplic->mmode && aplic->msimode && (addr == APLIC_SMSICFGADDRH)) { - return (aplic->num_children) ? aplic->smsicfgaddrH : 0; + val = (aplic->num_children) ? aplic->smsicfgaddrH : 0; } else if ((APLIC_SETIP_BASE <= addr) && (addr < (APLIC_SETIP_BASE + aplic->bitfield_words * 4))) { word = (addr - APLIC_SETIP_BASE) >> 2; - return riscv_aplic_read_pending_word(aplic, word); + val = riscv_aplic_read_pending_word(aplic, word); } else if (addr == APLIC_SETIPNUM) { - return 0; + val = 0; } else if ((APLIC_CLRIP_BASE <= addr) && (addr < (APLIC_CLRIP_BASE + aplic->bitfield_words * 4))) { word = (addr - APLIC_CLRIP_BASE) >> 2; - return riscv_aplic_read_input_word(aplic, word); + val = riscv_aplic_read_input_word(aplic, word); } else if (addr == APLIC_CLRIPNUM) { - return 0; + val = 0; } else if ((APLIC_SETIE_BASE <= addr) && (addr < (APLIC_SETIE_BASE + aplic->bitfield_words * 4))) { word = (addr - APLIC_SETIE_BASE) >> 2; - return riscv_aplic_read_enabled_word(aplic, word); + val = riscv_aplic_read_enabled_word(aplic, word); } else if (addr == APLIC_SETIENUM) { - return 0; + val = 0; } else if ((APLIC_CLRIE_BASE <= addr) && (addr < (APLIC_CLRIE_BASE + aplic->bitfield_words * 4))) { - return 0; + val = 0; } else if (addr == APLIC_CLRIENUM) { - return 0; + val = 0; } else if (addr == APLIC_SETIPNUM_LE) { - return 0; + val = 0; } else if (addr == APLIC_SETIPNUM_BE) { - return 0; + val = 0; } else if (addr == APLIC_GENMSI) { - return (aplic->msimode) ? aplic->genmsi : 0; + val = (aplic->msimode) ? aplic->genmsi : 0; } else if ((APLIC_TARGET_BASE <= addr) && (addr < (APLIC_TARGET_BASE + (aplic->num_irqs - 1) * 4))) { irq = ((addr - APLIC_TARGET_BASE) >> 2) + 1; if (!riscv_aplic_source_active(aplic, irq)) { - return 0; + val = 0; + } else { + val = aplic->target[irq]; } - return aplic->target[irq]; } else if (!aplic->msimode && (APLIC_IDC_BASE <= addr) && (addr < (APLIC_IDC_BASE + aplic->num_harts * APLIC_IDC_SIZE))) { idc = (addr - APLIC_IDC_BASE) / APLIC_IDC_SIZE; switch (addr - (APLIC_IDC_BASE + idc * APLIC_IDC_SIZE)) { case APLIC_IDC_IDELIVERY: - return aplic->idelivery[idc]; + val = aplic->idelivery[idc]; + break; case APLIC_IDC_IFORCE: - return aplic->iforce[idc]; + val = aplic->iforce[idc]; + break; case APLIC_IDC_ITHRESHOLD: - return aplic->ithreshold[idc]; + val = aplic->ithreshold[idc]; + break; case APLIC_IDC_TOPI: - return riscv_aplic_idc_topi(aplic, idc); + val = riscv_aplic_idc_topi(aplic, idc); + break; case APLIC_IDC_CLAIMI: - return riscv_aplic_idc_claimi(aplic, idc); + val = riscv_aplic_idc_claimi(aplic, idc); + break; default: goto err; }; } + trace_riscv_aplic_read(addr, size, val); + return val; + err: qemu_log_mask(LOG_GUEST_ERROR, "%s: Invalid register read 0x%" HWADDR_PRIx "\n", @@ -XXX,XX +XXX,XX @@ static void riscv_aplic_write(void *opaque, hwaddr addr, uint64_t value, goto err; } + trace_riscv_aplic_write(addr, size, value); + if (addr == APLIC_DOMAINCFG) { /* Only IE bit writable at the moment */ value &= APLIC_DOMAINCFG_IE; diff --git a/hw/intc/trace-events b/hw/intc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/trace-events +++ b/hw/intc/trace-events @@ -XXX,XX +XXX,XX @@ loongarch_msi_set_irq(int irq_num) "set msi irq %d" loongarch_extioi_setirq(int irq, int level) "set extirq irq %d level %d" loongarch_extioi_readw(uint64_t addr, uint64_t val) "addr: 0x%"PRIx64 "val: 0x%" PRIx64 loongarch_extioi_writew(uint64_t addr, uint64_t val) "addr: 0x%"PRIx64 "val: 0x%" PRIx64 + +# riscv_aplic.c +riscv_aplic_read(uint64_t offset, unsigned size, uint64_t value) "offset: 0x%" PRIx64 ", size: %u, value: 0x%" PRIx64 +riscv_aplic_write(uint64_t offset, unsigned size, uint64_t value) "offset: 0x%" PRIx64 ", size: %u, value: 0x%" PRIx64 -- 2.53.0 From: Jay Chang <jay.chang@sifive.com> When software clears CMD_ILL or CQMF error bits by writing 1 to CQCSR, the IOMMU should re-check the command queue and continue processing pending commands if head != tail. Per RISC-V IOMMU specification : If command-queue access leads to a memory fault then the command-queue-memory-fault bit is set to 1 and the commandqueue stalls until this bit is cleared. To re-enable command processing, software should clear this bit by writing 1. Signed-off-by: Jay Chang <jay.chang@sifive.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Nutty Liu <nutty.liu@hotmail.com> Message-ID: <20260518070143.8405-1-jay.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/hw/riscv/riscv-iommu.c b/hw/riscv/riscv-iommu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.c +++ b/hw/riscv/riscv-iommu.c @@ -XXX,XX +XXX,XX @@ static void riscv_iommu_process_cq_control(RISCVIOMMUState *s) } riscv_iommu_reg_mod32(s, RISCV_IOMMU_REG_CQCSR, ctrl_set, ctrl_clr); + + /* + * After clearing error bits (CMD_ILL, CQMF), if queue is still active, + * re-process pending command. + */ + ctrl_set = riscv_iommu_reg_get32(s, RISCV_IOMMU_REG_CQCSR); + if ((ctrl_set & RISCV_IOMMU_CQCSR_CQON) && + !(ctrl_set & (RISCV_IOMMU_CQCSR_CMD_ILL | RISCV_IOMMU_CQCSR_CQMF))) { + riscv_iommu_process_cq_tail(s); + } } static void riscv_iommu_process_fq_control(RISCVIOMMUState *s) -- 2.53.0