Hi; this pullreq contains a new board model npcm845-evb, plus some more minor cleanups, refactorings and a few bugfixes. thanks -- PMM The following changes since commit 40efe733e10cc00e4fb4f9f5790a28e744e63c62: Merge tag 'pull-tcg-20250215-3' of https://gitlab.com/rth7680/qemu into staging (2025-02-19 08:36:45 +0800) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20250220 for you to fetch changes up to 1c3169179b8242866316108386800379c4e22974: docs/system/arm: Add Description for NPCM8XX SoC (2025-02-20 15:22:22 +0000) ---------------------------------------------------------------- target-arm queue: * Fix some incorrect syndrome values in various sysreg traps * Clean up sysreg trap code to avoid similar future bugs * Make boards/SoCs using a9mpcore and a15mpcore objects specify number of GIC interrupts explicitly * Kconfig: Extract CONFIG_USB_CHIPIDEA from CONFIG_IMX * target/arm: Use uint32_t in t32_expandimm_imm() * New board model: NPCM845 Evaluation board "npcm845-evb" ---------------------------------------------------------------- Bernhard Beschow (1): Kconfig: Extract CONFIG_USB_CHIPIDEA from CONFIG_IMX Hao Wu (17): roms: Update vbootrom to 1287b6e pc-bios: Add NPCM8XX vBootrom hw/ssi: Make flash size a property in NPCM7XX FIU hw/misc: Rename npcm7xx_gcr to npcm_gcr hw/misc: Move NPCM7XX GCR to NPCM GCR hw/misc: Add nr_regs and cold_reset_values to NPCM GCR hw/misc: Add support for NPCM8XX GCR hw/misc: Store DRAM size in NPCM8XX GCR Module hw/misc: Support 8-bytes memop in NPCM GCR module hw/misc: Rename npcm7xx_clk to npcm_clk hw/misc: Move NPCM7XX CLK to NPCM CLK hw/misc: Add nr_regs and cold_reset_values to NPCM CLK hw/misc: Support NPCM8XX CLK Module Registers hw/net: Add NPCM8XX PCS Module hw/arm: Add NPCM8XX SoC hw/arm: Add NPCM845 Evaluation board docs/system/arm: Add Description for NPCM8XX SoC Peter Maydell (14): target/arm: Report correct syndrome for UNDEFINED CNTPS_*_EL1 from EL2 and NS EL1 target/arm: Report correct syndrome for UNDEFINED AT ops with wrong NSE, NS target/arm: Report correct syndrome for UNDEFINED S1E2 AT ops at EL3 target/arm: Report correct syndrome for UNDEFINED LOR sysregs when NS=0 target/arm: Make CP_ACCESS_TRAPs to AArch32 EL3 be Monitor traps hw/intc/arm_gicv3_cpuif: Don't downgrade monitor traps for AArch32 EL3 target/arm: Honour SDCR.TDCC and SCR.TERR in AArch32 EL3 non-Monitor modes hw/intc/arm_gicv3_cpuif(): Remove redundant tests of is_a64() target/arm: Support CP_ACCESS_TRAP_EL1 as a CPAccessResult target/arm: Use CP_ACCESS_TRAP_EL1 for traps that are always to EL1 target/arm: Use TRAP_UNCATEGORIZED for XScale CPAR traps target/arm: Remove CP_ACCESS_TRAP handling target/arm: Rename CP_ACCESS_TRAP_UNCATEGORIZED to CP_ACCESS_UNDEFINED target/arm: Correct errors in WFI/WFE trapping Philippe Mathieu-Daudé (8): hw/arm/exynos4210: Replace magic 32 by proper 'GIC_INTERNAL' definition hw/arm/exynos4210: Specify explicitly the GIC has 64 external IRQs hw/arm/realview: Specify explicitly the GIC has 64 external IRQs hw/arm/xilinx_zynq: Replace IRQ_OFFSET -> GIC_INTERNAL hw/arm/xilinx_zynq: Specify explicitly the GIC has 64 external IRQs hw/arm/vexpress: Specify explicitly the GIC has 64 external IRQs hw/arm/highbank: Specify explicitly the GIC has 128 external IRQs hw/cpu/arm_mpcore: Remove default values for GIC external IRQs Stephen Longfield (1): target/arm: Use uint32_t in t32_expandimm_imm() MAINTAINERS | 1 + docs/system/arm/nuvoton.rst | 27 +- configs/devices/aarch64-softmmu/default.mak | 1 + include/hw/arm/npcm7xx.h | 8 +- include/hw/arm/npcm8xx.h | 127 ++++ include/hw/misc/{npcm7xx_clk.h => npcm_clk.h} | 47 +- include/hw/misc/{npcm7xx_gcr.h => npcm_gcr.h} | 29 +- include/hw/net/npcm_pcs.h | 42 ++ include/hw/ssi/npcm7xx_fiu.h | 1 + target/arm/cpregs.h | 15 +- target/arm/cpu.h | 6 + hw/arm/exynos4210.c | 10 +- hw/arm/highbank.c | 8 +- hw/arm/npcm7xx.c | 6 + hw/arm/npcm8xx.c | 805 ++++++++++++++++++++++++++ hw/arm/npcm8xx_boards.c | 254 ++++++++ hw/arm/realview.c | 11 +- hw/arm/vexpress.c | 7 +- hw/arm/xilinx_zynq.c | 43 +- hw/cpu/a15mpcore.c | 18 +- hw/cpu/a9mpcore.c | 18 +- hw/intc/arm_gicv3_cpuif.c | 15 +- hw/misc/npcm7xx_gcr.c | 264 --------- hw/misc/{npcm7xx_clk.c => npcm_clk.c} | 235 ++++++-- hw/misc/npcm_gcr.c | 482 +++++++++++++++ hw/net/npcm_pcs.c | 410 +++++++++++++ hw/ssi/npcm7xx_fiu.c | 16 +- target/arm/debug_helper.c | 5 +- target/arm/helper.c | 75 ++- target/arm/tcg/op_helper.c | 71 ++- target/arm/tcg/translate.c | 2 +- hw/arm/Kconfig | 19 +- hw/arm/meson.build | 1 + hw/misc/meson.build | 4 +- hw/misc/trace-events | 12 +- hw/net/meson.build | 1 + hw/net/trace-events | 4 +- hw/usb/Kconfig | 4 + hw/usb/meson.build | 2 +- pc-bios/README | 8 +- pc-bios/meson.build | 1 + pc-bios/npcm7xx_bootrom.bin | Bin 768 -> 768 bytes pc-bios/npcm8xx_bootrom.bin | Bin 0 -> 608 bytes roms/Makefile | 6 + roms/vbootrom | 2 +- 45 files changed, 2626 insertions(+), 497 deletions(-) create mode 100644 include/hw/arm/npcm8xx.h rename include/hw/misc/{npcm7xx_clk.h => npcm_clk.h} (83%) rename include/hw/misc/{npcm7xx_gcr.h => npcm_gcr.h} (76%) create mode 100644 include/hw/net/npcm_pcs.h create mode 100644 hw/arm/npcm8xx.c create mode 100644 hw/arm/npcm8xx_boards.c delete mode 100644 hw/misc/npcm7xx_gcr.c rename hw/misc/{npcm7xx_clk.c => npcm_clk.c} (82%) create mode 100644 hw/misc/npcm_gcr.c create mode 100644 hw/net/npcm_pcs.c create mode 100644 pc-bios/npcm8xx_bootrom.bin The access pseudocode for the CNTPS_TVAL_EL1, CNTPS_CTL_EL1 and CNTPS_CVAL_EL1 secure timer registers says that they are UNDEFINED from EL2 or NS EL1. We incorrectly return CP_ACCESS_TRAP from the access function in these cases, which means that we report the wrong syndrome value to the target EL. Use CP_ACCESS_TRAP_UNCATEGORIZED, which reports the correct syndrome value for an UNDEFINED instruction. Cc: qemu-stable@nongnu.org Fixes: b4d3978c2fd ("target-arm: Add the AArch64 view of the Secure physical timer") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20250130182309.717346-2-peter.maydell@linaro.org --- target/arm/helper.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult gt_stimer_access(CPUARMState *env, switch (arm_current_el(env)) { case 1: if (!arm_is_secure(env)) { - return CP_ACCESS_TRAP; + return CP_ACCESS_TRAP_UNCATEGORIZED; } if (!(env->cp15.scr_el3 & SCR_ST)) { return CP_ACCESS_TRAP_EL3; @@ -XXX,XX +XXX,XX @@ static CPAccessResult gt_stimer_access(CPUARMState *env, return CP_ACCESS_OK; case 0: case 2: - return CP_ACCESS_TRAP; + return CP_ACCESS_TRAP_UNCATEGORIZED; case 3: return CP_ACCESS_OK; default: -- 2.43.0 R_NYXTL says that these AT insns should be UNDEFINED if they would operate on an EL lower than EL3 and SCR_EL3.{NSE,NS} is set to the Reserved {1, 0}. We were incorrectly reporting them with the wrong syndrome; use CP_ACCESS_TRAP_UNCATEGORIZED so they are reported as UNDEFINED. Cc: qemu-stable@nongnu.org Fixes: 1acd00ef1410 ("target/arm/helper: Check SCR_EL3.{NSE, NS} encoding for AT instructions") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20250130182309.717346-3-peter.maydell@linaro.org --- target/arm/helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult at_e012_access(CPUARMState *env, const ARMCPRegInfo *ri, * scr_write() ensures that the NSE bit is not set otherwise. */ if ((env->cp15.scr_el3 & (SCR_NSE | SCR_NS)) == SCR_NSE) { - return CP_ACCESS_TRAP; + return CP_ACCESS_TRAP_UNCATEGORIZED; } return CP_ACCESS_OK; } -- 2.43.0 The pseudocode for AT S1E2R and AT S1E2W says that they should be UNDEFINED if executed at EL3 when EL2 is not enabled. We were incorrectly using CP_ACCESS_TRAP and reporting the wrong exception syndrome as a result. Use CP_ACCESS_TRAP_UNCATEGORIZED. Cc: qemu-stable@nongnu.org Fixes: 2a47df953202e1 ("target-arm: Wire up AArch64 EL2 and EL3 address translation ops") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20250130182309.717346-4-peter.maydell@linaro.org --- target/arm/helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult at_s1e2_access(CPUARMState *env, const ARMCPRegInfo *ri, { if (arm_current_el(env) == 3 && !(env->cp15.scr_el3 & (SCR_NS | SCR_EEL2))) { - return CP_ACCESS_TRAP; + return CP_ACCESS_TRAP_UNCATEGORIZED; } return at_e012_access(env, ri, isread); } -- 2.43.0 The pseudocode for the accessors for the LOR sysregs says they are UNDEFINED if SCR_EL3.NS is 0. We were reporting the wrong syndrome value here; use CP_ACCESS_TRAP_UNCATEGORIZED. Cc: qemu-stable@nongnu.org Fixes: 2d7137c10faf ("target/arm: Implement the ARMv8.1-LOR extension") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20250130182309.717346-5-peter.maydell@linaro.org --- target/arm/helper.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_lor_other(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) { if (arm_is_secure_below_el3(env)) { - /* Access denied in secure mode. */ - return CP_ACCESS_TRAP; + /* UNDEF if SCR_EL3.NS == 0 */ + return CP_ACCESS_TRAP_UNCATEGORIZED; } return access_lor_ns(env, ri, isread); } -- 2.43.0 In system register access pseudocode the common pattern for AArch32 registers with access traps to EL3 is: at EL1 and EL2: if HaveEL(EL3) && !ELUsingAArch32(EL3) && (SCR_EL3.TERR == 1) then AArch64.AArch32SystemAccessTrap(EL3, 0x03); elsif HaveEL(EL3) && ELUsingAArch32(EL3) && (SCR.TERR == 1) then AArch32.TakeMonitorTrapException(); at EL3: if (PSTATE.M != M32_Monitor) && (SCR.TERR == 1) then AArch32.TakeMonitorTrapException(); (taking as an example the ERRIDR access pseudocode). This implements the behaviour of (in this case) SCR.TERR that "Accesses to the specified registers from modes other than Monitor mode generate a Monitor Trap exception" and of SCR_EL3.TERR that "Accesses of the specified Error Record registers at EL2 and EL1 are trapped to EL3, unless the instruction generates a higher priority exception". In QEMU we don't implement this pattern correctly in two ways: * in access_check_cp_reg() we turn the CP_ACCESS_TRAP_EL3 into an UNDEF, not a trap to Monitor mode * in the access functions, we check trap bits like SCR.TERR only when arm_current_el(env) < 3 -- this is correct for AArch64 EL3, but misses the "trap non-Monitor-mode execution at EL3 into Monitor mode" case for AArch32 EL3 In this commit we fix the first of these two issues, by making access_check_cp_reg() handle CP_ACCESS_TRAP_EL3 as a Monitor trap. This is a kind of exception that we haven't yet implemented(!), so we need a new EXCP_MON_TRAP for it. This diverges from the pseudocode approach, where every access check function explicitly checks for "if EL3 is AArch32" and takes a monitor trap; if we wanted to be closer to the pseudocode we could add a new CP_ACCESS_TRAP_MONITOR and make all the accessfns use it when appropriate. But because there are no non-standard cases in the pseudocode (i.e. where either it raises a Monitor trap that doesn't correspond to an AArch64 SystemAccessTrap or where it raises a SystemAccessTrap that doesn't correspond to a Monitor trap), handling this all in one place seems less likely to result in future bugs where we forgot again about this special case when writing an accessor. (The cc of stable here is because "hw/intc/arm_gicv3_cpuif: Don't downgrade monitor traps for AArch32 EL3" which is also cc:stable will implicitly use the new EXCP_MON_TRAP code path.) Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20250130182309.717346-6-peter.maydell@linaro.org --- target/arm/cpu.h | 1 + target/arm/helper.c | 11 +++++++++++ target/arm/tcg/op_helper.c | 13 ++++++++++++- 3 files changed, 24 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ #define EXCP_NMI 26 #define EXCP_VINMI 27 #define EXCP_VFNMI 28 +#define EXCP_MON_TRAP 29 /* AArch32 trap to Monitor mode */ /* NB: add new EXCP_ defines to the array in arm_log_exception() too */ #define ARMV7M_EXCP_RESET 1 diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void arm_log_exception(CPUState *cs) [EXCP_NMI] = "NMI", [EXCP_VINMI] = "Virtual IRQ NMI", [EXCP_VFNMI] = "Virtual FIQ NMI", + [EXCP_MON_TRAP] = "Monitor Trap", }; if (idx >= 0 && idx < ARRAY_SIZE(excnames)) { @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch32(CPUState *cs) mask = CPSR_A | CPSR_I | CPSR_F; offset = 0; break; + case EXCP_MON_TRAP: + new_mode = ARM_CPU_MODE_MON; + addr = 0x04; + mask = CPSR_A | CPSR_I | CPSR_F; + if (env->thumb) { + offset = 2; + } else { + offset = 4; + } + break; default: cpu_abort(cs, "Unhandled exception 0x%x\n", cs->exception_index); return; /* Never happens. Keep compiler happy. */ diff --git a/target/arm/tcg/op_helper.c b/target/arm/tcg/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/op_helper.c +++ b/target/arm/tcg/op_helper.c @@ -XXX,XX +XXX,XX @@ const void *HELPER(access_check_cp_reg)(CPUARMState *env, uint32_t key, const ARMCPRegInfo *ri = get_arm_cp_reginfo(cpu->cp_regs, key); CPAccessResult res = CP_ACCESS_OK; int target_el; + uint32_t excp; assert(ri != NULL); @@ -XXX,XX +XXX,XX @@ const void *HELPER(access_check_cp_reg)(CPUARMState *env, uint32_t key, } fail: + excp = EXCP_UDEF; switch (res & ~CP_ACCESS_EL_MASK) { case CP_ACCESS_TRAP: + /* + * If EL3 is AArch32 then there's no syndrome register; the cases + * where we would raise a SystemAccessTrap to AArch64 EL3 all become + * raising a Monitor trap exception. (Because there's no visible + * syndrome it doesn't matter what we pass to raise_exception().) + */ + if ((res & CP_ACCESS_EL_MASK) == 3 && !arm_el_is_aa64(env, 3)) { + excp = EXCP_MON_TRAP; + } break; case CP_ACCESS_TRAP_UNCATEGORIZED: /* Only CP_ACCESS_TRAP traps are direct to a specified EL */ @@ -XXX,XX +XXX,XX @@ const void *HELPER(access_check_cp_reg)(CPUARMState *env, uint32_t key, g_assert_not_reached(); } - raise_exception(env, EXCP_UDEF, syndrome, target_el); + raise_exception(env, excp, syndrome, target_el); } const void *HELPER(lookup_cp_reg)(CPUARMState *env, uint32_t key) -- 2.43.0 In the gicv3_{irq,fiq,irqfiq}_access() functions, there is a check which downgrades a CP_ACCESS_TRAP_EL3 to CP_ACCESS_TRAP if EL3 is not AArch64. This has been there since the GIC was first implemented, but it isn't right: if we are trapping because of SCR.IRQ or SCR.FIQ then we definitely want to be going to EL3 (doing AArch32.TakeMonitorTrapException() in pseudocode terms). We might want to not take a trap at all, but we don't ever want to go to the default target EL, because that would mean, for instance, taking a trap to Hyp mode if the trapped access was made from Hyp mode. (This might have been an attempt to work around our failure to properly implement Monitor Traps.) Remove the bogus check. Cc: qemu-stable@nongnu.org Fixes: 359fbe65e01e ("hw/intc/arm_gicv3: Implement GICv3 CPU interface registers") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20250130182309.717346-7-peter.maydell@linaro.org --- hw/intc/arm_gicv3_cpuif.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult gicv3_irqfiq_access(CPUARMState *env, } } - if (r == CP_ACCESS_TRAP_EL3 && !arm_el_is_aa64(env, 3)) { - r = CP_ACCESS_TRAP; - } return r; } @@ -XXX,XX +XXX,XX @@ static CPAccessResult gicv3_fiq_access(CPUARMState *env, } } - if (r == CP_ACCESS_TRAP_EL3 && !arm_el_is_aa64(env, 3)) { - r = CP_ACCESS_TRAP; - } return r; } @@ -XXX,XX +XXX,XX @@ static CPAccessResult gicv3_irq_access(CPUARMState *env, } } - if (r == CP_ACCESS_TRAP_EL3 && !arm_el_is_aa64(env, 3)) { - r = CP_ACCESS_TRAP; - } return r; } -- 2.43.0 There are not many traps in AArch32 which should trap to Monitor mode, but these trap bits should trap not just lower ELs to Monitor mode but also the non-Monitor modes running at EL3 (i.e. Secure System, Secure Undef, etc). We get this wrong because the relevant access functions implement the AArch64-style logic of if (el < 3 && trap_bit_set) { return CP_ACCESS_TRAP_EL3; } which won't trap the non-Monitor modes at EL3. Correct this error by using arm_is_el3_or_mon() instead, which returns true when the CPU is at AArch64 EL3 or AArch32 Monitor mode. (Since the new callsites are compiled also for the linux-user mode, we need to provide a dummy implementation for CONFIG_USER_ONLY.) This affects only: * trapping of ERRIDR via SCR.TERR * trapping of the debug channel registers via SDCR.TDCC * trapping of GICv3 registers via SCR.IRQ and SCR.FIQ (which we already used arm_is_el3_or_mon() for) This patch changes the handling of SCR.TERR and SDCR.TDCC. This patch only changes guest-visible behaviour for "-cpu max" on the qemu-system-arm binary, because SCR.TERR and SDCR.TDCC (and indeed the entire SDCR register) only arrived in Armv8, and the only guest CPU we support which has any v8 features and also starts in AArch32 EL3 is the 32-bit 'max'. Other uses of CP_ACCESS_TRAP_EL3 don't need changing: * uses in code paths that can't happen when EL3 is AArch32: access_trap_aa32s_el1, cpacr_access, cptr_access, nsacr_access * uses which are in accessfns for AArch64-only registers: gt_stimer_access, gt_cntpoff_access, access_hxen, access_tpidr2, access_smpri, access_smprimap, access_lor_ns, access_pauth, access_mte, access_tfsr_el2, access_scxtnum, access_fgt * trap bits which exist only in the AArch64 version of the trap register, not the AArch32 one: access_tpm, pmreg_access, access_dbgvcr32, access_tdra, access_tda, access_tdosa (TPM, TDA and TDOSA exist only in MDCR_EL3, not in SDCR, and we enforce this in sdcr_write()) Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20250130182309.717346-8-peter.maydell@linaro.org --- target/arm/cpu.h | 5 +++++ target/arm/debug_helper.c | 3 ++- target/arm/helper.c | 2 +- 3 files changed, 8 insertions(+), 2 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline bool arm_is_secure_below_el3(CPUARMState *env) return false; } +static inline bool arm_is_el3_or_mon(CPUARMState *env) +{ + return false; +} + static inline ARMSecuritySpace arm_security_space(CPUARMState *env) { return ARMSS_NonSecure; diff --git a/target/arm/debug_helper.c b/target/arm/debug_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/debug_helper.c +++ b/target/arm/debug_helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_tdcc(CPUARMState *env, const ARMCPRegInfo *ri, if (el < 2 && (mdcr_el2_tda || mdcr_el2_tdcc)) { return CP_ACCESS_TRAP_EL2; } - if (el < 3 && ((env->cp15.mdcr_el3 & MDCR_TDA) || mdcr_el3_tdcc)) { + if (!arm_is_el3_or_mon(env) && + ((env->cp15.mdcr_el3 & MDCR_TDA) || mdcr_el3_tdcc)) { return CP_ACCESS_TRAP_EL3; } return CP_ACCESS_OK; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_terr(CPUARMState *env, const ARMCPRegInfo *ri, if (el < 2 && (arm_hcr_el2_eff(env) & HCR_TERR)) { return CP_ACCESS_TRAP_EL2; } - if (el < 3 && (env->cp15.scr_el3 & SCR_TERR)) { + if (!arm_is_el3_or_mon(env) && (env->cp15.scr_el3 & SCR_TERR)) { return CP_ACCESS_TRAP_EL3; } return CP_ACCESS_OK; -- 2.43.0 In the gicv3_{irq,fiq,irqfiq}_access() functions, in the arm_current_el(env) == 3 case we do the following test: if (!is_a64(env) && !arm_is_el3_or_mon(env)) { r = CP_ACCESS_TRAP_EL3; } In this check, the "!is_a64(env)" is redundant, because if we are at EL3 and in AArch64 then arm_is_el3_or_mon() will return true and we will skip the if() body anyway. Remove the unnecessary tests. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20250130182309.717346-9-peter.maydell@linaro.org --- hw/intc/arm_gicv3_cpuif.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult gicv3_irqfiq_access(CPUARMState *env, r = CP_ACCESS_TRAP_EL3; break; case 3: - if (!is_a64(env) && !arm_is_el3_or_mon(env)) { + if (!arm_is_el3_or_mon(env)) { r = CP_ACCESS_TRAP_EL3; } break; @@ -XXX,XX +XXX,XX @@ static CPAccessResult gicv3_fiq_access(CPUARMState *env, r = CP_ACCESS_TRAP_EL3; break; case 3: - if (!is_a64(env) && !arm_is_el3_or_mon(env)) { + if (!arm_is_el3_or_mon(env)) { r = CP_ACCESS_TRAP_EL3; } break; @@ -XXX,XX +XXX,XX @@ static CPAccessResult gicv3_irq_access(CPUARMState *env, r = CP_ACCESS_TRAP_EL3; break; case 3: - if (!is_a64(env) && !arm_is_el3_or_mon(env)) { + if (!arm_is_el3_or_mon(env)) { r = CP_ACCESS_TRAP_EL3; } break; -- 2.43.0 In the CPAccessResult enum, the CP_ACCESS_TRAP* values indicate the equivalent of the pseudocode AArch64.SystemAccessTrap(..., 0x18), causing a trap to a specified exception level with a syndrome value giving information about the failing instructions. In the pseudocode, such traps are always taken to a specified target EL. We support that for target EL of 2 or 3 via CP_ACCESS_TRAP_EL2 and CP_ACCESS_TRAP_EL3, but the only way to take the access trap to EL1 currently is to use CP_ACCESS_TRAP, which takes the trap to the "usual target EL" (EL1 if in EL0, otherwise to the current EL). Add CP_ACCESS_TRAP_EL1 so that access functions can follow the pseudocode more closely. (Note that for the common case in the pseudocode of "trap to EL2 if HCR_EL2.TGE is set, otherwise trap to EL1", we handle this in raise_exception(), so access functions don't need to special case it and can use CP_ACCESS_TRAP_EL1.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20250130182309.717346-10-peter.maydell@linaro.org --- target/arm/cpregs.h | 1 + target/arm/tcg/op_helper.c | 6 ++++-- 2 files changed, 5 insertions(+), 2 deletions(-) diff --git a/target/arm/cpregs.h b/target/arm/cpregs.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpregs.h +++ b/target/arm/cpregs.h @@ -XXX,XX +XXX,XX @@ typedef enum CPAccessResult { * 0xc or 0x18). */ CP_ACCESS_TRAP = (1 << 2), + CP_ACCESS_TRAP_EL1 = CP_ACCESS_TRAP | 1, CP_ACCESS_TRAP_EL2 = CP_ACCESS_TRAP | 2, CP_ACCESS_TRAP_EL3 = CP_ACCESS_TRAP | 3, diff --git a/target/arm/tcg/op_helper.c b/target/arm/tcg/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/op_helper.c +++ b/target/arm/tcg/op_helper.c @@ -XXX,XX +XXX,XX @@ const void *HELPER(access_check_cp_reg)(CPUARMState *env, uint32_t key, * the other trap takes priority. So we take the "check HSTR_EL2" path * for all of those cases.) */ - if (res != CP_ACCESS_OK && ((res & CP_ACCESS_EL_MASK) == 0) && + if (res != CP_ACCESS_OK && ((res & CP_ACCESS_EL_MASK) < 2) && arm_current_el(env) == 0) { goto fail; } @@ -XXX,XX +XXX,XX @@ const void *HELPER(access_check_cp_reg)(CPUARMState *env, uint32_t key, case 0: target_el = exception_target_el(env); break; + case 1: + assert(arm_current_el(env) < 2); + break; case 2: assert(arm_current_el(env) != 3); assert(arm_is_el2_enabled(env)); @@ -XXX,XX +XXX,XX @@ const void *HELPER(access_check_cp_reg)(CPUARMState *env, uint32_t key, assert(arm_feature(env, ARM_FEATURE_EL3)); break; default: - /* No "direct" traps to EL1 */ g_assert_not_reached(); } -- 2.43.0 We currently use CP_ACCESS_TRAP in a number of access functions where we know we're currently at EL0; in this case the "usual target EL" is EL1, so CP_ACCESS_TRAP and CP_ACCESS_TRAP_EL1 behave the same. Use CP_ACCESS_TRAP_EL1 to more closely match the pseudocode for this sort of check. Note that in the case of the access functions foc cacheop to PoC or PoU, the code was correct but the comment was wrong: SCTLR_EL1.UCI traps for DC CVAC, DC CIVAC, DC CVAP, DC CVADP, DC CVAU and IC IVAU should be system access traps, not UNDEFs. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20250130182309.717346-11-peter.maydell@linaro.org --- target/arm/debug_helper.c | 2 +- target/arm/helper.c | 30 +++++++++++++++--------------- 2 files changed, 16 insertions(+), 16 deletions(-) diff --git a/target/arm/debug_helper.c b/target/arm/debug_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/debug_helper.c +++ b/target/arm/debug_helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_tdcc(CPUARMState *env, const ARMCPRegInfo *ri, (env->cp15.mdcr_el3 & MDCR_TDCC); if (el < 1 && mdscr_el1_tdcc) { - return CP_ACCESS_TRAP; + return CP_ACCESS_TRAP_EL1; } if (el < 2 && (mdcr_el2_tda || mdcr_el2_tdcc)) { return CP_ACCESS_TRAP_EL2; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult pmreg_access(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t mdcr_el2 = arm_mdcr_el2_eff(env); if (el == 0 && !(env->cp15.c9_pmuserenr & 1)) { - return CP_ACCESS_TRAP; + return CP_ACCESS_TRAP_EL1; } if (el < 2 && (mdcr_el2 & MDCR_TPM)) { return CP_ACCESS_TRAP_EL2; @@ -XXX,XX +XXX,XX @@ static CPAccessResult teehbr_access(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) { if (arm_current_el(env) == 0 && (env->teecr & 1)) { - return CP_ACCESS_TRAP; + return CP_ACCESS_TRAP_EL1; } return teecr_access(env, ri, isread); } @@ -XXX,XX +XXX,XX @@ static CPAccessResult gt_cntfrq_access(CPUARMState *env, const ARMCPRegInfo *ri, cntkctl = env->cp15.c14_cntkctl; } if (!extract32(cntkctl, 0, 2)) { - return CP_ACCESS_TRAP; + return CP_ACCESS_TRAP_EL1; } break; case 1: @@ -XXX,XX +XXX,XX @@ static CPAccessResult gt_counter_access(CPUARMState *env, int timeridx, /* CNT[PV]CT: not visible from PL0 if EL0[PV]CTEN is zero */ if (!extract32(env->cp15.c14_cntkctl, timeridx, 1)) { - return CP_ACCESS_TRAP; + return CP_ACCESS_TRAP_EL1; } /* fall through */ case 1: @@ -XXX,XX +XXX,XX @@ static CPAccessResult gt_timer_access(CPUARMState *env, int timeridx, * EL0 if EL0[PV]TEN is zero. */ if (!extract32(env->cp15.c14_cntkctl, 9 - timeridx, 1)) { - return CP_ACCESS_TRAP; + return CP_ACCESS_TRAP_EL1; } /* fall through */ @@ -XXX,XX +XXX,XX @@ static CPAccessResult aa64_daif_access(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) { if (arm_current_el(env) == 0 && !(arm_sctlr(env, 0) & SCTLR_UMA)) { - return CP_ACCESS_TRAP; + return CP_ACCESS_TRAP_EL1; } return CP_ACCESS_OK; } @@ -XXX,XX +XXX,XX @@ static CPAccessResult aa64_cacheop_poc_access(CPUARMState *env, /* Cache invalidate/clean to Point of Coherency or Persistence... */ switch (arm_current_el(env)) { case 0: - /* ... EL0 must UNDEF unless SCTLR_EL1.UCI is set. */ + /* ... EL0 must trap to EL1 unless SCTLR_EL1.UCI is set. */ if (!(arm_sctlr(env, 0) & SCTLR_UCI)) { - return CP_ACCESS_TRAP; + return CP_ACCESS_TRAP_EL1; } /* fall through */ case 1: @@ -XXX,XX +XXX,XX @@ static CPAccessResult do_cacheop_pou_access(CPUARMState *env, uint64_t hcrflags) /* Cache invalidate/clean to Point of Unification... */ switch (arm_current_el(env)) { case 0: - /* ... EL0 must UNDEF unless SCTLR_EL1.UCI is set. */ + /* ... EL0 must trap to EL1 unless SCTLR_EL1.UCI is set. */ if (!(arm_sctlr(env, 0) & SCTLR_UCI)) { - return CP_ACCESS_TRAP; + return CP_ACCESS_TRAP_EL1; } /* fall through */ case 1: @@ -XXX,XX +XXX,XX @@ static CPAccessResult aa64_zva_access(CPUARMState *env, const ARMCPRegInfo *ri, } } else { if (!(env->cp15.sctlr_el[1] & SCTLR_DZE)) { - return CP_ACCESS_TRAP; + return CP_ACCESS_TRAP_EL1; } if (hcr & HCR_TDZ) { return CP_ACCESS_TRAP_EL2; @@ -XXX,XX +XXX,XX @@ static CPAccessResult ctr_el0_access(CPUARMState *env, const ARMCPRegInfo *ri, } } else { if (!(env->cp15.sctlr_el[1] & SCTLR_UCT)) { - return CP_ACCESS_TRAP; + return CP_ACCESS_TRAP_EL1; } if (hcr & HCR_TID2) { return CP_ACCESS_TRAP_EL2; @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_tpidr2(CPUARMState *env, const ARMCPRegInfo *ri, if (el == 0) { uint64_t sctlr = arm_sctlr(env, el); if (!(sctlr & SCTLR_EnTP2)) { - return CP_ACCESS_TRAP; + return CP_ACCESS_TRAP_EL1; } } /* TODO: FEAT_FGT */ @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_scxtnum(CPUARMState *env, const ARMCPRegInfo *ri, if (hcr & HCR_TGE) { return CP_ACCESS_TRAP_EL2; } - return CP_ACCESS_TRAP; + return CP_ACCESS_TRAP_EL1; } } else if (el < 2 && (env->cp15.sctlr_el[2] & SCTLR_TSCXT)) { return CP_ACCESS_TRAP_EL2; @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_predinv(CPUARMState *env, const ARMCPRegInfo *ri, if (el == 0) { uint64_t sctlr = arm_sctlr(env, el); if (!(sctlr & SCTLR_EnRCTX)) { - return CP_ACCESS_TRAP; + return CP_ACCESS_TRAP_EL1; } } else if (el == 1) { uint64_t hcr = arm_hcr_el2_eff(env); -- 2.43.0 On XScale CPUs, there is no EL2 or AArch64, so no syndrome register. These traps are just UNDEFs in the traditional AArch32 sense, so CP_ACCESS_TRAP_UNCATEGORIZED is more accurate than CP_ACCESS_TRAP. This has no visible behavioural change, because the guest doesn't have a way to see the syndrome value we generate. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20250130182309.717346-12-peter.maydell@linaro.org --- target/arm/tcg/op_helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/tcg/op_helper.c b/target/arm/tcg/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/op_helper.c +++ b/target/arm/tcg/op_helper.c @@ -XXX,XX +XXX,XX @@ const void *HELPER(access_check_cp_reg)(CPUARMState *env, uint32_t key, if (arm_feature(env, ARM_FEATURE_XSCALE) && ri->cp < 14 && extract32(env->cp15.c15_cpar, ri->cp, 1) == 0) { - res = CP_ACCESS_TRAP; + res = CP_ACCESS_TRAP_UNCATEGORIZED; goto fail; } -- 2.43.0 There are no longer any uses of CP_ACCESS_TRAP in access functions, because we have converted them all to use either CP_ACCESS_TRAP_EL1 or CP_ACCESS_TRAP_UNCATEGORIZED, as appropriate. Remove the handling of bare CP_ACCESS_TRAP from the access_check_cp_reg() helper, so that it now asserts if an access function returns a value requesting a trap without a target EL. Rename CP_ACCESS_TRAP to CP_ACCESS_TRAP_BIT, to make it clearer that this is an internal-only definition, not something that it makes sense to return from an access function. This should help to avoid future bugs where we return the wrong syndrome value by mistake. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20250130182309.717346-13-peter.maydell@linaro.org --- target/arm/cpregs.h | 11 ++++++----- target/arm/tcg/op_helper.c | 13 ++++++++----- 2 files changed, 14 insertions(+), 10 deletions(-) diff --git a/target/arm/cpregs.h b/target/arm/cpregs.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpregs.h +++ b/target/arm/cpregs.h @@ -XXX,XX +XXX,XX @@ typedef enum CPAccessResult { * Access fails due to a configurable trap or enable which would * result in a categorized exception syndrome giving information about * the failing instruction (ie syndrome category 0x3, 0x4, 0x5, 0x6, - * 0xc or 0x18). + * 0xc or 0x18). These traps are always to a specified target EL, + * never to the usual target EL. */ - CP_ACCESS_TRAP = (1 << 2), - CP_ACCESS_TRAP_EL1 = CP_ACCESS_TRAP | 1, - CP_ACCESS_TRAP_EL2 = CP_ACCESS_TRAP | 2, - CP_ACCESS_TRAP_EL3 = CP_ACCESS_TRAP | 3, + CP_ACCESS_TRAP_BIT = (1 << 2), + CP_ACCESS_TRAP_EL1 = CP_ACCESS_TRAP_BIT | 1, + CP_ACCESS_TRAP_EL2 = CP_ACCESS_TRAP_BIT | 2, + CP_ACCESS_TRAP_EL3 = CP_ACCESS_TRAP_BIT | 3, /* * Access fails and results in an exception syndrome 0x0 ("uncategorized"). diff --git a/target/arm/tcg/op_helper.c b/target/arm/tcg/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/op_helper.c +++ b/target/arm/tcg/op_helper.c @@ -XXX,XX +XXX,XX @@ const void *HELPER(access_check_cp_reg)(CPUARMState *env, uint32_t key, fail: excp = EXCP_UDEF; - switch (res & ~CP_ACCESS_EL_MASK) { - case CP_ACCESS_TRAP: + switch (res) { + /* CP_ACCESS_TRAP* traps are always direct to a specified EL */ + case CP_ACCESS_TRAP_EL3: /* * If EL3 is AArch32 then there's no syndrome register; the cases * where we would raise a SystemAccessTrap to AArch64 EL3 all become * raising a Monitor trap exception. (Because there's no visible * syndrome it doesn't matter what we pass to raise_exception().) */ - if ((res & CP_ACCESS_EL_MASK) == 3 && !arm_el_is_aa64(env, 3)) { + if (!arm_el_is_aa64(env, 3)) { excp = EXCP_MON_TRAP; } break; + case CP_ACCESS_TRAP_EL2: + case CP_ACCESS_TRAP_EL1: + break; case CP_ACCESS_TRAP_UNCATEGORIZED: - /* Only CP_ACCESS_TRAP traps are direct to a specified EL */ - assert((res & CP_ACCESS_EL_MASK) == 0); + /* CP_ACCESS_TRAP_UNCATEGORIZED is never direct to a specified EL */ if (cpu_isar_feature(aa64_ids, cpu) && isread && arm_cpreg_in_idspace(ri)) { /* -- 2.43.0 CP_ACCESS_TRAP_UNCATEGORIZED is technically an accurate description of what this return value from a cpreg accessfn does, but it's liable to confusion because it doesn't match how the Arm ARM pseudocode indicates this case. What it does is an EXCP_UDEF with a zero ("uncategorized") syndrome value, which is what an UNDEFINED instruction does. The pseudocode uses "UNDEFINED" to show this; rename our constant to CP_ACCESS_UNDEFINED to make the parallel clearer. Commit created with sed -i -e 's/CP_ACCESS_TRAP_UNCATEGORIZED/CP_ACCESS_UNDEFINED/' $(git grep -l CP_ACCESS_TRAP_UNCATEGORIZED) plus manual editing of the comment. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20250130182309.717346-14-peter.maydell@linaro.org --- target/arm/cpregs.h | 5 +++-- target/arm/helper.c | 30 +++++++++++++++--------------- target/arm/tcg/op_helper.c | 6 +++--- 3 files changed, 21 insertions(+), 20 deletions(-) diff --git a/target/arm/cpregs.h b/target/arm/cpregs.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpregs.h +++ b/target/arm/cpregs.h @@ -XXX,XX +XXX,XX @@ typedef enum CPAccessResult { CP_ACCESS_TRAP_EL3 = CP_ACCESS_TRAP_BIT | 3, /* - * Access fails and results in an exception syndrome 0x0 ("uncategorized"). + * Access fails with UNDEFINED, i.e. an exception syndrome 0x0 + * ("uncategorized"), which is what an undefined insn produces. * Note that this is not a catch-all case -- the set of cases which may * result in this failure is specifically defined by the architecture. * This trap is always to the usual target EL, never directly to a * specified target EL. */ - CP_ACCESS_TRAP_UNCATEGORIZED = (2 << 2), + CP_ACCESS_UNDEFINED = (2 << 2), } CPAccessResult; /* Indexes into fgt_read[] */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_el3_aa32ns(CPUARMState *env, { if (!is_a64(env) && arm_current_el(env) == 3 && arm_is_secure_below_el3(env)) { - return CP_ACCESS_TRAP_UNCATEGORIZED; + return CP_ACCESS_UNDEFINED; } return CP_ACCESS_OK; } @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_trap_aa32s_el1(CPUARMState *env, return CP_ACCESS_TRAP_EL3; } /* This will be EL1 NS and EL2 NS, which just UNDEF */ - return CP_ACCESS_TRAP_UNCATEGORIZED; + return CP_ACCESS_UNDEFINED; } /* @@ -XXX,XX +XXX,XX @@ static CPAccessResult gt_cntfrq_access(CPUARMState *env, const ARMCPRegInfo *ri, if (!isread && ri->state == ARM_CP_STATE_AA32 && arm_is_secure_below_el3(env)) { /* Accesses from 32-bit Secure EL1 UNDEF (*not* trap to EL3!) */ - return CP_ACCESS_TRAP_UNCATEGORIZED; + return CP_ACCESS_UNDEFINED; } break; case 2: @@ -XXX,XX +XXX,XX @@ static CPAccessResult gt_cntfrq_access(CPUARMState *env, const ARMCPRegInfo *ri, } if (!isread && el < arm_highest_el(env)) { - return CP_ACCESS_TRAP_UNCATEGORIZED; + return CP_ACCESS_UNDEFINED; } return CP_ACCESS_OK; @@ -XXX,XX +XXX,XX @@ static CPAccessResult gt_stimer_access(CPUARMState *env, switch (arm_current_el(env)) { case 1: if (!arm_is_secure(env)) { - return CP_ACCESS_TRAP_UNCATEGORIZED; + return CP_ACCESS_UNDEFINED; } if (!(env->cp15.scr_el3 & SCR_ST)) { return CP_ACCESS_TRAP_EL3; @@ -XXX,XX +XXX,XX @@ static CPAccessResult gt_stimer_access(CPUARMState *env, return CP_ACCESS_OK; case 0: case 2: - return CP_ACCESS_TRAP_UNCATEGORIZED; + return CP_ACCESS_UNDEFINED; case 3: return CP_ACCESS_OK; default: @@ -XXX,XX +XXX,XX @@ static CPAccessResult ats_access(CPUARMState *env, const ARMCPRegInfo *ri, } return CP_ACCESS_TRAP_EL3; } - return CP_ACCESS_TRAP_UNCATEGORIZED; + return CP_ACCESS_UNDEFINED; } } return CP_ACCESS_OK; @@ -XXX,XX +XXX,XX @@ static CPAccessResult at_e012_access(CPUARMState *env, const ARMCPRegInfo *ri, * scr_write() ensures that the NSE bit is not set otherwise. */ if ((env->cp15.scr_el3 & (SCR_NSE | SCR_NS)) == SCR_NSE) { - return CP_ACCESS_TRAP_UNCATEGORIZED; + return CP_ACCESS_UNDEFINED; } return CP_ACCESS_OK; } @@ -XXX,XX +XXX,XX @@ static CPAccessResult at_s1e2_access(CPUARMState *env, const ARMCPRegInfo *ri, { if (arm_current_el(env) == 3 && !(env->cp15.scr_el3 & (SCR_NS | SCR_EEL2))) { - return CP_ACCESS_TRAP_UNCATEGORIZED; + return CP_ACCESS_UNDEFINED; } return at_e012_access(env, ri, isread); } @@ -XXX,XX +XXX,XX @@ static CPAccessResult sp_el0_access(CPUARMState *env, const ARMCPRegInfo *ri, * Access to SP_EL0 is undefined if it's being used as * the stack pointer. */ - return CP_ACCESS_TRAP_UNCATEGORIZED; + return CP_ACCESS_UNDEFINED; } return CP_ACCESS_OK; } @@ -XXX,XX +XXX,XX @@ static CPAccessResult sel2_access(CPUARMState *env, const ARMCPRegInfo *ri, if (arm_current_el(env) == 3 || arm_is_secure_below_el3(env)) { return CP_ACCESS_OK; } - return CP_ACCESS_TRAP_UNCATEGORIZED; + return CP_ACCESS_UNDEFINED; } static const ARMCPRegInfo el2_sec_cp_reginfo[] = { @@ -XXX,XX +XXX,XX @@ static CPAccessResult nsacr_access(CPUARMState *env, const ARMCPRegInfo *ri, if (isread) { return CP_ACCESS_OK; } - return CP_ACCESS_TRAP_UNCATEGORIZED; + return CP_ACCESS_UNDEFINED; } static const ARMCPRegInfo el3_cp_reginfo[] = { @@ -XXX,XX +XXX,XX @@ static CPAccessResult e2h_access(CPUARMState *env, const ARMCPRegInfo *ri, return CP_ACCESS_OK; } if (!(arm_hcr_el2_eff(env) & HCR_E2H)) { - return CP_ACCESS_TRAP_UNCATEGORIZED; + return CP_ACCESS_UNDEFINED; } return CP_ACCESS_OK; } @@ -XXX,XX +XXX,XX @@ static CPAccessResult el2_e2h_e12_access(CPUARMState *env, } /* FOO_EL12 aliases only exist when E2H is 1; otherwise they UNDEF */ if (!(arm_hcr_el2_eff(env) & HCR_E2H)) { - return CP_ACCESS_TRAP_UNCATEGORIZED; + return CP_ACCESS_UNDEFINED; } if (ri->orig_accessfn) { return ri->orig_accessfn(env, ri->opaque, isread); @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_lor_other(CPUARMState *env, { if (arm_is_secure_below_el3(env)) { /* UNDEF if SCR_EL3.NS == 0 */ - return CP_ACCESS_TRAP_UNCATEGORIZED; + return CP_ACCESS_UNDEFINED; } return access_lor_ns(env, ri, isread); } diff --git a/target/arm/tcg/op_helper.c b/target/arm/tcg/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/op_helper.c +++ b/target/arm/tcg/op_helper.c @@ -XXX,XX +XXX,XX @@ const void *HELPER(access_check_cp_reg)(CPUARMState *env, uint32_t key, if (arm_feature(env, ARM_FEATURE_XSCALE) && ri->cp < 14 && extract32(env->cp15.c15_cpar, ri->cp, 1) == 0) { - res = CP_ACCESS_TRAP_UNCATEGORIZED; + res = CP_ACCESS_UNDEFINED; goto fail; } @@ -XXX,XX +XXX,XX @@ const void *HELPER(access_check_cp_reg)(CPUARMState *env, uint32_t key, case CP_ACCESS_TRAP_EL2: case CP_ACCESS_TRAP_EL1: break; - case CP_ACCESS_TRAP_UNCATEGORIZED: - /* CP_ACCESS_TRAP_UNCATEGORIZED is never direct to a specified EL */ + case CP_ACCESS_UNDEFINED: + /* CP_ACCESS_UNDEFINED is never direct to a specified EL */ if (cpu_isar_feature(aa64_ids, cpu) && isread && arm_cpreg_in_idspace(ri)) { /* -- 2.43.0 The code for WFI/WFE trapping has several errors: * it wasn't using arm_sctlr(), so it would look at SCTLR_EL1 even if the CPU was in the EL2&0 translation regime * it was raising UNDEF, not Monitor Trap, for traps to AArch32 EL3 because of SCR.{TWE,TWI} * it was not honouring SCR.{TWE,TWI} when running in AArch32 at EL3 not in Monitor mode * it checked SCR.{TWE,TWI} even on v7 CPUs which don't have those bits Fix these bugs. Cc: qemu-stable@nongnu.org Fixes: b1eced713d99 ("target-arm: Add WFx instruction trap support") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20250130182309.717346-15-peter.maydell@linaro.org --- target/arm/tcg/op_helper.c | 37 ++++++++++++++++++------------------- 1 file changed, 18 insertions(+), 19 deletions(-) diff --git a/target/arm/tcg/op_helper.c b/target/arm/tcg/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/op_helper.c +++ b/target/arm/tcg/op_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(check_bxj_trap)(CPUARMState *env, uint32_t rm) } #ifndef CONFIG_USER_ONLY -/* Function checks whether WFx (WFI/WFE) instructions are set up to be trapped. +/* + * Function checks whether WFx (WFI/WFE) instructions are set up to be trapped. * The function returns the target EL (1-3) if the instruction is to be trapped; * otherwise it returns 0 indicating it is not trapped. + * For a trap, *excp is updated with the EXCP_* trap type to use. */ -static inline int check_wfx_trap(CPUARMState *env, bool is_wfe) +static inline int check_wfx_trap(CPUARMState *env, bool is_wfe, uint32_t *excp) { int cur_el = arm_current_el(env); uint64_t mask; + *excp = EXCP_UDEF; + if (arm_feature(env, ARM_FEATURE_M)) { /* M profile cores can never trap WFI/WFE. */ return 0; @@ -XXX,XX +XXX,XX @@ static inline int check_wfx_trap(CPUARMState *env, bool is_wfe) * WFx instructions being trapped to EL1. These trap bits don't exist in v7. */ if (cur_el < 1 && arm_feature(env, ARM_FEATURE_V8)) { - int target_el; - mask = is_wfe ? SCTLR_nTWE : SCTLR_nTWI; - if (arm_is_secure_below_el3(env) && !arm_el_is_aa64(env, 3)) { - /* Secure EL0 and Secure PL1 is at EL3 */ - target_el = 3; - } else { - target_el = 1; - } - - if (!(env->cp15.sctlr_el[target_el] & mask)) { - return target_el; + if (!(arm_sctlr(env, cur_el) & mask)) { + return exception_target_el(env); } } @@ -XXX,XX +XXX,XX @@ static inline int check_wfx_trap(CPUARMState *env, bool is_wfe) } /* We are not trapping to EL1 or EL2; trap to EL3 if SCR_EL3 requires it */ - if (cur_el < 3) { + if (arm_feature(env, ARM_FEATURE_V8) && !arm_is_el3_or_mon(env)) { mask = (is_wfe) ? SCR_TWE : SCR_TWI; if (env->cp15.scr_el3 & mask) { + if (!arm_el_is_aa64(env, 3)) { + *excp = EXCP_MON_TRAP; + } return 3; } } @@ -XXX,XX +XXX,XX @@ void HELPER(wfi)(CPUARMState *env, uint32_t insn_len) return; #else CPUState *cs = env_cpu(env); - int target_el = check_wfx_trap(env, false); + uint32_t excp; + int target_el = check_wfx_trap(env, false, &excp); if (cpu_has_work(cs)) { /* Don't bother to go into our "low power state" if @@ -XXX,XX +XXX,XX @@ void HELPER(wfi)(CPUARMState *env, uint32_t insn_len) env->regs[15] -= insn_len; } - raise_exception(env, EXCP_UDEF, syn_wfx(1, 0xe, 0, insn_len == 2), + raise_exception(env, excp, syn_wfx(1, 0xe, 0, insn_len == 2), target_el); } @@ -XXX,XX +XXX,XX @@ void HELPER(wfit)(CPUARMState *env, uint64_t timeout) #else ARMCPU *cpu = env_archcpu(env); CPUState *cs = env_cpu(env); - int target_el = check_wfx_trap(env, false); + uint32_t excp; + int target_el = check_wfx_trap(env, false, &excp); /* The WFIT should time out when CNTVCT_EL0 >= the specified value. */ uint64_t cntval = gt_get_countervalue(env); uint64_t offset = gt_virt_cnt_offset(env); @@ -XXX,XX +XXX,XX @@ void HELPER(wfit)(CPUARMState *env, uint64_t timeout) if (target_el) { env->pc -= 4; - raise_exception(env, EXCP_UDEF, syn_wfx(1, 0xe, 0, false), - target_el); + raise_exception(env, excp, syn_wfx(1, 0xe, 0, false), target_el); } if (uadd64_overflow(timeout, offset, &nexttick)) { -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> The 32 IRQ lines skipped are the GIC internal ones. Use the GIC_INTERNAL definition for clarity. No logical change. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20250212154333.28644-2-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/exynos4210.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_init_board_irqs(Exynos4210State *s) } if (irq_id) { qdev_connect_gpio_out(splitter, splitin, - qdev_get_gpio_in(extgicdev, irq_id - 32)); + qdev_get_gpio_in(extgicdev, + irq_id - GIC_INTERNAL)); } } for (; n < EXYNOS4210_MAX_INT_COMBINER_IN_IRQ; n++) { @@ -XXX,XX +XXX,XX @@ static void exynos4210_init_board_irqs(Exynos4210State *s) s->irq_table[n] = qdev_get_gpio_in(splitter, 0); qdev_connect_gpio_out(splitter, 0, qdev_get_gpio_in(intcdev, n)); qdev_connect_gpio_out(splitter, 1, - qdev_get_gpio_in(extgicdev, irq_id - 32)); + qdev_get_gpio_in(extgicdev, + irq_id - GIC_INTERNAL)); } else { s->irq_table[n] = qdev_get_gpio_in(intcdev, n); } -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> When not specified, Cortex-A9MP configures its GIC with 64 external IRQs (see commit a32134aad89 "arm:make the number of GIC interrupts configurable"). Add the GIC_EXT_IRQS definition (with a comment) to make that explicit. Except explicitly setting a property value to its same implicit value, there is no logical change intended. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20250212154333.28644-3-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/exynos4210.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ #define EXYNOS4210_PL330_BASE1_ADDR 0x12690000 #define EXYNOS4210_PL330_BASE2_ADDR 0x12850000 +#define GIC_EXT_IRQS 64 /* FIXME: verify for this SoC */ + enum ExtGicId { EXT_GIC_ID_MDMA_LCD0 = 66, EXT_GIC_ID_PDMA0, @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) /* Private memory region and Internal GIC */ qdev_prop_set_uint32(DEVICE(&s->a9mpcore), "num-cpu", EXYNOS4210_NCPUS); + qdev_prop_set_uint32(DEVICE(&s->a9mpcore), "num-irq", + GIC_EXT_IRQS + GIC_INTERNAL); busdev = SYS_BUS_DEVICE(&s->a9mpcore); sysbus_realize(busdev, &error_fatal); sysbus_mmio_map(busdev, 0, EXYNOS4210_SMP_PRIVATE_BASE_ADDR); -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> When not specified, Cortex-A9MP configures its GIC with 64 external IRQs (see commit a32134aad89 "arm:make the number of GIC interrupts configurable"). Add the GIC_EXT_IRQS definition (with a comment) to make that explicit. Except explicitly setting a property value to its same implicit value, there is no logical change intended. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20250212154333.28644-4-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/realview.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/hw/arm/realview.c b/hw/arm/realview.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/realview.c +++ b/hw/arm/realview.c @@ -XXX,XX +XXX,XX @@ #define SMP_BOOT_ADDR 0xe0000000 #define SMP_BOOTREG_ADDR 0x10000030 +#define GIC_EXT_IRQS 64 /* Realview PBX-A9 development board */ + /* Board init. */ static struct arm_boot_info realview_binfo = { @@ -XXX,XX +XXX,XX @@ static void realview_init(MachineState *machine, sysbus_mmio_map(SYS_BUS_DEVICE(sysctl), 0, 0x10000000); if (is_mpcore) { - dev = qdev_new(is_pb ? TYPE_A9MPCORE_PRIV : "realview_mpcore"); + if (is_pb) { + dev = qdev_new(TYPE_A9MPCORE_PRIV); + qdev_prop_set_uint32(dev, "num-irq", GIC_EXT_IRQS + GIC_INTERNAL); + } else { + dev = qdev_new("realview_mpcore"); + } qdev_prop_set_uint32(dev, "num-cpu", smp_cpus); busdev = SYS_BUS_DEVICE(dev); sysbus_realize_and_unref(busdev, &error_fatal); @@ -XXX,XX +XXX,XX @@ static void realview_init(MachineState *machine, /* For now just create the nIRQ GIC, and ignore the others. */ dev = sysbus_create_simple(TYPE_REALVIEW_GIC, gic_addr, cpu_irq[0]); } - for (n = 0; n < 64; n++) { + for (n = 0; n < GIC_EXT_IRQS; n++) { pic[n] = qdev_get_gpio_in(dev, n); } -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> We already have a definition to distinct GIC internal IRQs versus external ones, use it. No logical changes. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20250212154333.28644-5-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/xilinx_zynq.c | 34 ++++++++++++++++------------------ 1 file changed, 16 insertions(+), 18 deletions(-) diff --git a/hw/arm/xilinx_zynq.c b/hw/arm/xilinx_zynq.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xilinx_zynq.c +++ b/hw/arm/xilinx_zynq.c @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(ZynqMachineState, ZYNQ_MACHINE) #define FLASH_SIZE (64 * 1024 * 1024) #define FLASH_SECTOR_SIZE (128 * 1024) -#define IRQ_OFFSET 32 /* pic interrupts start from index 32 */ - #define MPCORE_PERIPHBASE 0xF8F00000 #define ZYNQ_BOARD_MIDR 0x413FC090 @@ -XXX,XX +XXX,XX @@ static void zynq_init(MachineState *machine) pic[n] = qdev_get_gpio_in(dev, n); } - n = zynq_init_spi_flashes(0xE0006000, pic[58 - IRQ_OFFSET], false, 0); - n = zynq_init_spi_flashes(0xE0007000, pic[81 - IRQ_OFFSET], false, n); - n = zynq_init_spi_flashes(0xE000D000, pic[51 - IRQ_OFFSET], true, n); + n = zynq_init_spi_flashes(0xE0006000, pic[58 - GIC_INTERNAL], false, 0); + n = zynq_init_spi_flashes(0xE0007000, pic[81 - GIC_INTERNAL], false, n); + n = zynq_init_spi_flashes(0xE000D000, pic[51 - GIC_INTERNAL], true, n); - sysbus_create_simple(TYPE_CHIPIDEA, 0xE0002000, pic[53 - IRQ_OFFSET]); - sysbus_create_simple(TYPE_CHIPIDEA, 0xE0003000, pic[76 - IRQ_OFFSET]); + sysbus_create_simple(TYPE_CHIPIDEA, 0xE0002000, pic[53 - GIC_INTERNAL]); + sysbus_create_simple(TYPE_CHIPIDEA, 0xE0003000, pic[76 - GIC_INTERNAL]); dev = qdev_new(TYPE_CADENCE_UART); busdev = SYS_BUS_DEVICE(dev); @@ -XXX,XX +XXX,XX @@ static void zynq_init(MachineState *machine) qdev_get_clock_out(slcr, "uart0_ref_clk")); sysbus_realize_and_unref(busdev, &error_fatal); sysbus_mmio_map(busdev, 0, 0xE0000000); - sysbus_connect_irq(busdev, 0, pic[59 - IRQ_OFFSET]); + sysbus_connect_irq(busdev, 0, pic[59 - GIC_INTERNAL]); dev = qdev_new(TYPE_CADENCE_UART); busdev = SYS_BUS_DEVICE(dev); qdev_prop_set_chr(dev, "chardev", serial_hd(1)); @@ -XXX,XX +XXX,XX @@ static void zynq_init(MachineState *machine) qdev_get_clock_out(slcr, "uart1_ref_clk")); sysbus_realize_and_unref(busdev, &error_fatal); sysbus_mmio_map(busdev, 0, 0xE0001000); - sysbus_connect_irq(busdev, 0, pic[82 - IRQ_OFFSET]); + sysbus_connect_irq(busdev, 0, pic[82 - GIC_INTERNAL]); sysbus_create_varargs("cadence_ttc", 0xF8001000, - pic[42-IRQ_OFFSET], pic[43-IRQ_OFFSET], pic[44-IRQ_OFFSET], NULL); + pic[42-GIC_INTERNAL], pic[43-GIC_INTERNAL], pic[44-GIC_INTERNAL], NULL); sysbus_create_varargs("cadence_ttc", 0xF8002000, - pic[69-IRQ_OFFSET], pic[70-IRQ_OFFSET], pic[71-IRQ_OFFSET], NULL); + pic[69-GIC_INTERNAL], pic[70-GIC_INTERNAL], pic[71-GIC_INTERNAL], NULL); - gem_init(0xE000B000, pic[54 - IRQ_OFFSET]); - gem_init(0xE000C000, pic[77 - IRQ_OFFSET]); + gem_init(0xE000B000, pic[54 - GIC_INTERNAL]); + gem_init(0xE000C000, pic[77 - GIC_INTERNAL]); for (n = 0; n < 2; n++) { int hci_irq = n ? 79 : 56; @@ -XXX,XX +XXX,XX @@ static void zynq_init(MachineState *machine) qdev_prop_set_uint64(dev, "capareg", ZYNQ_SDHCI_CAPABILITIES); sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, hci_addr); - sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[hci_irq - IRQ_OFFSET]); + sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[hci_irq - GIC_INTERNAL]); di = drive_get(IF_SD, 0, n); blk = di ? blk_by_legacy_dinfo(di) : NULL; @@ -XXX,XX +XXX,XX @@ static void zynq_init(MachineState *machine) dev = qdev_new(TYPE_ZYNQ_XADC); sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xF8007100); - sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[39-IRQ_OFFSET]); + sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[39-GIC_INTERNAL]); dev = qdev_new("pl330"); object_property_set_link(OBJECT(dev), "memory", @@ -XXX,XX +XXX,XX @@ static void zynq_init(MachineState *machine) busdev = SYS_BUS_DEVICE(dev); sysbus_realize_and_unref(busdev, &error_fatal); sysbus_mmio_map(busdev, 0, 0xF8003000); - sysbus_connect_irq(busdev, 0, pic[45-IRQ_OFFSET]); /* abort irq line */ + sysbus_connect_irq(busdev, 0, pic[45-GIC_INTERNAL]); /* abort irq line */ for (n = 0; n < ARRAY_SIZE(dma_irqs); ++n) { /* event irqs */ - sysbus_connect_irq(busdev, n + 1, pic[dma_irqs[n] - IRQ_OFFSET]); + sysbus_connect_irq(busdev, n + 1, pic[dma_irqs[n] - GIC_INTERNAL]); } dev = qdev_new("xlnx.ps7-dev-cfg"); busdev = SYS_BUS_DEVICE(dev); sysbus_realize_and_unref(busdev, &error_fatal); - sysbus_connect_irq(busdev, 0, pic[40 - IRQ_OFFSET]); + sysbus_connect_irq(busdev, 0, pic[40 - GIC_INTERNAL]); sysbus_mmio_map(busdev, 0, 0xF8007000); /* -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Looking at the Zynq 7000 SoC Technical Reference Manual (UG585 v1.14) on Appendix A: Register Details, the mpcore Interrupt Controller Type Register (ICDICTR) has the IT_Lines_Number field read-only with value 0x2, described as: IT_Lines_Number b00010 = the distributor provides 96 interrupts, 64 external interrupt lines. Add a GIC_EXT_IRQS definition (with a comment) to make the number of GIC external IRQs explicit. Except explicitly setting a property value to its same implicit value, there is no logical change intended. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20250212154333.28644-6-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/xilinx_zynq.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/hw/arm/xilinx_zynq.c b/hw/arm/xilinx_zynq.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xilinx_zynq.c +++ b/hw/arm/xilinx_zynq.c @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(ZynqMachineState, ZYNQ_MACHINE) #define MPCORE_PERIPHBASE 0xF8F00000 #define ZYNQ_BOARD_MIDR 0x413FC090 +#define GIC_EXT_IRQS 64 /* Zynq 7000 SoC */ + static const int dma_irqs[8] = { 46, 47, 48, 49, 72, 73, 74, 75 }; @@ -XXX,XX +XXX,XX @@ static void zynq_init(MachineState *machine) MemoryRegion *ocm_ram = g_new(MemoryRegion, 1); DeviceState *dev, *slcr; SysBusDevice *busdev; - qemu_irq pic[64]; + qemu_irq pic[GIC_EXT_IRQS]; int n; unsigned int smp_cpus = machine->smp.cpus; @@ -XXX,XX +XXX,XX @@ static void zynq_init(MachineState *machine) dev = qdev_new(TYPE_A9MPCORE_PRIV); qdev_prop_set_uint32(dev, "num-cpu", smp_cpus); + qdev_prop_set_uint32(dev, "num-irq", GIC_EXT_IRQS + GIC_INTERNAL); busdev = SYS_BUS_DEVICE(dev); sysbus_realize_and_unref(busdev, &error_fatal); sysbus_mmio_map(busdev, 0, MPCORE_PERIPHBASE); @@ -XXX,XX +XXX,XX @@ static void zynq_init(MachineState *machine) qdev_get_gpio_in(cpudev, ARM_CPU_FIQ)); } - for (n = 0; n < 64; n++) { + for (n = 0; n < GIC_EXT_IRQS; n++) { pic[n] = qdev_get_gpio_in(dev, n); } @@ -XXX,XX +XXX,XX @@ static void zynq_machine_class_init(ObjectClass *oc, void *data) }; MachineClass *mc = MACHINE_CLASS(oc); ObjectProperty *prop; - mc->desc = "Xilinx Zynq Platform Baseboard for Cortex-A9"; + mc->desc = "Xilinx Zynq 7000 Platform Baseboard for Cortex-A9"; mc->init = zynq_init; mc->max_cpus = ZYNQ_MAX_CPUS; mc->ignore_memory_transaction_failures = true; -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> When not specified, Cortex-A9MP configures its GIC with 64 external IRQs, (see commit a32134aad89 "arm:make the number of GIC interrupts configurable"), and Cortex-15MP to 128 (see commit 528622421eb "hw/cpu/a15mpcore: Correct default value for num-irq"). The Versatile Express board however expects a fixed set of 64 interrupts (see the fixed IRQ length when this board was added in commit 2055283bcc8 ("hw/vexpress: Add model of ARM Versatile Express board"). Add the GIC_EXT_IRQS definition (with a comment) to make that explicit. Except explicitly setting a property value to its same implicit value, there is no logical change intended. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20250212154333.28644-7-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/vexpress.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/vexpress.c +++ b/hw/arm/vexpress.c @@ -XXX,XX +XXX,XX @@ #define VEXPRESS_FLASH_SIZE (64 * 1024 * 1024) #define VEXPRESS_FLASH_SECT_SIZE (256 * 1024) +#define GIC_EXT_IRQS 64 /* Versatile Express A9 development board */ + /* Number of virtio transports to create (0..8; limited by * number of available IRQ lines). */ @@ -XXX,XX +XXX,XX @@ static void init_cpus(MachineState *ms, const char *cpu_type, */ dev = qdev_new(privdev); qdev_prop_set_uint32(dev, "num-cpu", smp_cpus); + qdev_prop_set_uint32(dev, "num-irq", GIC_EXT_IRQS + GIC_INTERNAL); busdev = SYS_BUS_DEVICE(dev); sysbus_realize_and_unref(busdev, &error_fatal); sysbus_mmio_map(busdev, 0, periphbase); @@ -XXX,XX +XXX,XX @@ static void init_cpus(MachineState *ms, const char *cpu_type, * external interrupts starting from 32 (because there * are internal interrupts 0..31). */ - for (n = 0; n < 64; n++) { + for (n = 0; n < GIC_EXT_IRQS; n++) { pic[n] = qdev_get_gpio_in(dev, n); } @@ -XXX,XX +XXX,XX @@ static void vexpress_common_init(MachineState *machine) VexpressMachineClass *vmc = VEXPRESS_MACHINE_GET_CLASS(machine); VEDBoardInfo *daughterboard = vmc->daughterboard; DeviceState *dev, *sysctl, *pl041; - qemu_irq pic[64]; + qemu_irq pic[GIC_EXT_IRQS]; uint32_t sys_id; DriveInfo *dinfo; PFlashCFI01 *pflash0; -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> When not specified, Cortex-A9MP configures its GIC with 64 external IRQs, (see commit a32134aad89 "arm:make the number of GIC interrupts configurable"), and Cortex-15MP to 128 (see commit 528622421eb "hw/cpu/a15mpcore: Correct default value for num-irq"). The Caldexa Highbank board however expects a fixed set of 128 interrupts (see the fixed IRQ length when this board was added in commit 2488514cef2 ("arm: SoC model for Calxeda Highbank"). Add the GIC_EXT_IRQS definition (with a comment) to make that explicit. Except explicitly setting a property value to its same implicit value, there is no logical change intended. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20250212154333.28644-8-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/highbank.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/hw/arm/highbank.c b/hw/arm/highbank.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/highbank.c +++ b/hw/arm/highbank.c @@ -XXX,XX +XXX,XX @@ #define MVBAR_ADDR 0x200 #define BOARD_SETUP_ADDR (MVBAR_ADDR + 8 * sizeof(uint32_t)) -#define NIRQ_GIC 160 +#define GIC_EXT_IRQS 128 /* EnergyCore ECX-1000 & ECX-2000 */ /* Board init. */ @@ -XXX,XX +XXX,XX @@ static void calxeda_init(MachineState *machine, enum cxmachines machine_id) { DeviceState *dev = NULL; SysBusDevice *busdev; - qemu_irq pic[128]; + qemu_irq pic[GIC_EXT_IRQS]; int n; unsigned int smp_cpus = machine->smp.cpus; qemu_irq cpu_irq[4]; @@ -XXX,XX +XXX,XX @@ static void calxeda_init(MachineState *machine, enum cxmachines machine_id) break; } qdev_prop_set_uint32(dev, "num-cpu", smp_cpus); - qdev_prop_set_uint32(dev, "num-irq", NIRQ_GIC); + qdev_prop_set_uint32(dev, "num-irq", GIC_EXT_IRQS + GIC_INTERNAL); busdev = SYS_BUS_DEVICE(dev); sysbus_realize_and_unref(busdev, &error_fatal); sysbus_mmio_map(busdev, 0, MPCORE_PERIPHBASE); @@ -XXX,XX +XXX,XX @@ static void calxeda_init(MachineState *machine, enum cxmachines machine_id) sysbus_connect_irq(busdev, n + 3 * smp_cpus, cpu_vfiq[n]); } - for (n = 0; n < 128; n++) { + for (n = 0; n < GIC_EXT_IRQS; n++) { pic[n] = qdev_get_gpio_in(dev, n); } -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Implicit default values are often hard to figure out, better be explicit. Now that all boards explicitly set the number of GIC external IRQs, remove the default values (displaying an error message if it is out of range). Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20250212154333.28644-9-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/cpu/a15mpcore.c | 18 ++++++++++++------ hw/cpu/a9mpcore.c | 18 ++++++++++++------ 2 files changed, 24 insertions(+), 12 deletions(-) diff --git a/hw/cpu/a15mpcore.c b/hw/cpu/a15mpcore.c index XXXXXXX..XXXXXXX 100644 --- a/hw/cpu/a15mpcore.c +++ b/hw/cpu/a15mpcore.c @@ -XXX,XX +XXX,XX @@ static void a15mp_priv_realize(DeviceState *dev, Error **errp) bool has_el2 = false; Object *cpuobj; + if (s->num_irq < 32 || s->num_irq > 256) { + error_setg(errp, "Property 'num-irq' must be between 32 and 256"); + return; + } + gicdev = DEVICE(&s->gic); qdev_prop_set_uint32(gicdev, "num-cpu", s->num_cpu); qdev_prop_set_uint32(gicdev, "num-irq", s->num_irq); @@ -XXX,XX +XXX,XX @@ static void a15mp_priv_realize(DeviceState *dev, Error **errp) static const Property a15mp_priv_properties[] = { DEFINE_PROP_UINT32("num-cpu", A15MPPrivState, num_cpu, 1), - /* The Cortex-A15MP may have anything from 0 to 224 external interrupt - * IRQ lines (with another 32 internal). We default to 128+32, which - * is the number provided by the Cortex-A15MP test chip in the - * Versatile Express A15 development board. - * Other boards may differ and should set this property appropriately. + /* + * The Cortex-A15MP may have anything from 0 to 224 external interrupt + * lines, plus always 32 internal IRQs. This property sets the total + * of internal + external, so the valid range is from 32 to 256. + * The board model must set this to whatever the configuration + * used for the CPU on that board or SoC is. */ - DEFINE_PROP_UINT32("num-irq", A15MPPrivState, num_irq, 160), + DEFINE_PROP_UINT32("num-irq", A15MPPrivState, num_irq, 0), }; static void a15mp_priv_class_init(ObjectClass *klass, void *data) diff --git a/hw/cpu/a9mpcore.c b/hw/cpu/a9mpcore.c index XXXXXXX..XXXXXXX 100644 --- a/hw/cpu/a9mpcore.c +++ b/hw/cpu/a9mpcore.c @@ -XXX,XX +XXX,XX @@ static void a9mp_priv_realize(DeviceState *dev, Error **errp) CPUState *cpu0; Object *cpuobj; + if (s->num_irq < 32 || s->num_irq > 256) { + error_setg(errp, "Property 'num-irq' must be between 32 and 256"); + return; + } + cpu0 = qemu_get_cpu(0); cpuobj = OBJECT(cpu0); if (strcmp(object_get_typename(cpuobj), ARM_CPU_TYPE_NAME("cortex-a9"))) { @@ -XXX,XX +XXX,XX @@ static void a9mp_priv_realize(DeviceState *dev, Error **errp) static const Property a9mp_priv_properties[] = { DEFINE_PROP_UINT32("num-cpu", A9MPPrivState, num_cpu, 1), - /* The Cortex-A9MP may have anything from 0 to 224 external interrupt - * IRQ lines (with another 32 internal). We default to 64+32, which - * is the number provided by the Cortex-A9MP test chip in the - * Realview PBX-A9 and Versatile Express A9 development boards. - * Other boards may differ and should set this property appropriately. + /* + * The Cortex-A9MP may have anything from 0 to 224 external interrupt + * lines, plus always 32 internal IRQs. This property sets the total + * of internal + external, so the valid range is from 32 to 256. + * The board model must set this to whatever the configuration + * used for the CPU on that board or SoC is. */ - DEFINE_PROP_UINT32("num-irq", A9MPPrivState, num_irq, 96), + DEFINE_PROP_UINT32("num-irq", A9MPPrivState, num_irq, 0), }; static void a9mp_priv_class_init(ObjectClass *klass, void *data) -- 2.43.0 From: Bernhard Beschow <shentey@gmail.com> TYPE_CHIPIDEA models an IP block which is also used in TYPE_ZYNQ_MACHINE which itself is not an IMX device. CONFIG_ZYNQ selects CONFIG_USB_EHCI_SYSBUS while TYPE_CHIPIDEA is a separate compilation unit, so only works by accident if CONFIG_IMX is given. Fix that by extracting CONFIG_USB_CHIPIDEA from CONFIG_IMX. cc: qemu-stable@nongnu.org Fixes: 616ec12d0fcc "hw/arm/xilinx_zynq: Fix USB port instantiation" Signed-off-by: Bernhard Beschow <shentey@gmail.com> Message-id: 20250209103604.29545-1-shentey@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 6 +++++- hw/usb/Kconfig | 4 ++++ hw/usb/meson.build | 2 +- 3 files changed, 10 insertions(+), 2 deletions(-) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ZYNQ select PL330 select SDHCI select SSI_M25P80 - select USB_EHCI_SYSBUS + select USB_CHIPIDEA select XILINX # UART select XILINX_AXI select XILINX_SPI @@ -XXX,XX +XXX,XX @@ config FSL_IMX25 select IMX select IMX_FEC select IMX_I2C + select USB_CHIPIDEA select WDT_IMX2 select SDHCI @@ -XXX,XX +XXX,XX @@ config FSL_IMX6 select PL310 # cache controller select PCI_EXPRESS_DESIGNWARE select SDHCI + select USB_CHIPIDEA select OR_IRQ config ASPEED_SOC @@ -XXX,XX +XXX,XX @@ config FSL_IMX7 select SDHCI select OR_IRQ select UNIMP + select USB_CHIPIDEA config ARM_SMMUV3 bool @@ -XXX,XX +XXX,XX @@ config FSL_IMX6UL select IMX_I2C select WDT_IMX2 select SDHCI + select USB_CHIPIDEA select UNIMP config MICROBIT diff --git a/hw/usb/Kconfig b/hw/usb/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/Kconfig +++ b/hw/usb/Kconfig @@ -XXX,XX +XXX,XX @@ config USB_DWC3 config XLNX_USB_SUBSYS bool select USB_DWC3 + +config USB_CHIPIDEA + bool + select USB_EHCI_SYSBUS diff --git a/hw/usb/meson.build b/hw/usb/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/meson.build +++ b/hw/usb/meson.build @@ -XXX,XX +XXX,XX @@ system_ss.add(when: 'CONFIG_USB_XHCI_SYSBUS', if_true: files('hcd-xhci-sysbus.c' system_ss.add(when: 'CONFIG_USB_XHCI_NEC', if_true: files('hcd-xhci-nec.c')) system_ss.add(when: 'CONFIG_USB_DWC2', if_true: files('hcd-dwc2.c')) system_ss.add(when: 'CONFIG_USB_DWC3', if_true: files('hcd-dwc3.c')) +system_ss.add(when: 'CONFIG_USB_CHIPIDEA', if_true: files('chipidea.c')) -system_ss.add(when: 'CONFIG_IMX', if_true: files('chipidea.c')) system_ss.add(when: 'CONFIG_IMX_USBPHY', if_true: files('imx-usb-phy.c')) system_ss.add(when: 'CONFIG_VT82C686', if_true: files('vt82c686-uhci-pci.c')) system_ss.add(when: 'CONFIG_XLNX_VERSAL', if_true: files('xlnx-versal-usb2-ctrl-regs.c')) -- 2.43.0 From: Stephen Longfield <slongfield@google.com> In t32_expandimm_imm(), we take an 8 bit value XY and construct a 32-bit value which might be of the form XY, 00XY00XY, XY00XY00, or XYXYXYXY. We do this with multiplications, and we use an 'int' type. For the cases where we're setting the high byte of the 32-bit value to XY, this means that we do an integer multiplication that might overflow, and rely on the -fwrapv semantics to keep this from being undefined behaviour. It's clearer to use an unsigned type here, because we're really doing operations on the value considered as a set of bits. The result is the same. The return value from the function remains 'int', because this is a decodetree !function function, and follows the API for those functions. Signed-off-by: Stephen Longfield <slongfield@google.com> Signed-off-by: Roque Arcudia Hernandez <roqueh@google.com> Message-id: 20250219165534.3387376-1-slongfield@google.com [PMM: Rewrote the commit message] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/translate.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/tcg/translate.c b/target/arm/tcg/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate.c +++ b/target/arm/tcg/translate.c @@ -XXX,XX +XXX,XX @@ static int t32_expandimm_rot(DisasContext *s, int x) /* Return the unrotated immediate from T32ExpandImm. */ static int t32_expandimm_imm(DisasContext *s, int x) { - int imm = extract32(x, 0, 8); + uint32_t imm = extract32(x, 0, 8); switch (extract32(x, 8, 4)) { case 0: /* XY */ -- 2.43.0 From: Hao Wu <wuhaotsh@google.com> This newer vbootrom supports NPCM8xx. Similar to the NPCM7XX one it supports loading the UBoot from the SPI device and not more. We updated the npcm7xx bootrom to be compiled from this version. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20250219184609.1839281-2-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- pc-bios/npcm7xx_bootrom.bin | Bin 768 -> 768 bytes roms/vbootrom | 2 +- 2 files changed, 1 insertion(+), 1 deletion(-) diff --git a/pc-bios/npcm7xx_bootrom.bin b/pc-bios/npcm7xx_bootrom.bin index XXXXXXX..XXXXXXX 100644 GIT binary patch delta 90 zcmZo*Yhc^(l+nU*!D9x6DNkDr=09a-2ztoGz`#|*F#jn7L;r()|Np;c0m>C1$z?$0 Ywog`Ma%Vh0Ig_b-VgU<}A_D>d06Rh+WdHyG delta 69 zcmZo*Yhc^(lu^NO!D9x2$xoRb7CdZGnE#ZCA@Cs+0|QqL!~CZV4E+!GPG)41X52Pe SmdTy*+~icIZXQJj1ONb5*AzJb diff --git a/roms/vbootrom b/roms/vbootrom index XXXXXXX..XXXXXXX 160000 --- a/roms/vbootrom +++ b/roms/vbootrom @@ -1 +1 @@ -Subproject commit 0c37a43527f0ee2b9584e7fb2fdc805e902635ac +Subproject commit 1287b6e42e839ba2ab0f06268c5b53ae60df3537 -- 2.43.0 From: Hao Wu <wuhaotsh@google.com> The bootrom is a minimal bootrom used to load an NPCM8XX image. The source code is located in the same repo as the NPCM7XX one: github.com/google/vbootrom/tree/master/npcm8xx. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20250219184609.1839281-3-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 1 + pc-bios/README | 8 ++++---- pc-bios/meson.build | 1 + pc-bios/npcm8xx_bootrom.bin | Bin 0 -> 608 bytes roms/Makefile | 6 ++++++ 5 files changed, 12 insertions(+), 4 deletions(-) create mode 100644 pc-bios/npcm8xx_bootrom.bin diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/*/npcm* F: tests/qtest/npcm* F: tests/qtest/adm1266-test.c F: pc-bios/npcm7xx_bootrom.bin +F: pc-bios/npcm8xx_bootrom.bin F: roms/vbootrom F: docs/system/arm/nuvoton.rst F: tests/functional/test_arm_quanta_gsj.py diff --git a/pc-bios/README b/pc-bios/README index XXXXXXX..XXXXXXX 100644 --- a/pc-bios/README +++ b/pc-bios/README @@ -XXX,XX +XXX,XX @@ source code also contains code reused from other projects described here: https://github.com/riscv/opensbi/blob/master/ThirdPartyNotices.md. -- npcm7xx_bootrom.bin is a simplified, free (Apache 2.0) boot ROM for Nuvoton - NPCM7xx BMC devices. It currently implements the bare minimum to load, parse, - initialize and run boot images stored in SPI flash, but may grow more - features over time as needed. The source code is available at: +- npcm{7xx,8xx}_bootrom.bin is a simplified, free (Apache 2.0) boot ROM for + Nuvoton NPCM7xx/8xx BMC devices. It currently implements the bare minimum to + load, parse, initialize and run boot images stored in SPI flash, but may grow + more features over time as needed. The source code is available at: https://github.com/google/vbootrom - hppa-firmware.img (32-bit) and hppa-firmware64.img (64-bit) are firmware diff --git a/pc-bios/meson.build b/pc-bios/meson.build index XXXXXXX..XXXXXXX 100644 --- a/pc-bios/meson.build +++ b/pc-bios/meson.build @@ -XXX,XX +XXX,XX @@ blobs = [ 'opensbi-riscv32-generic-fw_dynamic.bin', 'opensbi-riscv64-generic-fw_dynamic.bin', 'npcm7xx_bootrom.bin', + 'npcm8xx_bootrom.bin', 'vof.bin', 'vof-nvram.bin', ] diff --git a/pc-bios/npcm8xx_bootrom.bin b/pc-bios/npcm8xx_bootrom.bin new file mode 100644 index XXXXXXX..XXXXXXX GIT binary patch literal 608 zcmdUrKTE?<6vfX=0{*3B5ET?nwWA^;qEk()n=Xb9-4dxoSBrz#p|QJQL~zokn{Eyc z?PBXUkU+aB?k?IbNQftG5ej|*FC2c{bKkr7zLy3jhNxj`gc_y5h&V=Ru)PgZC)Y`f zTqA9Am28qL<U6@cMtA>Hlr*^&hT#;re-)dpxT0U42|O+cWOcx=B;{6xXH04vx?cjm z+%U{oFx!aPpV3>ZKz0i$XA-yq{f}<H?{MHBq+VwIvR9WmcL(xr1vuIRGELcRC-S+P zl3%RlR5(6+1;xg_<~xR#bPItDN1*Hp^{JyNs7o*BMq0Q9q1#>x4;|pb<NWIbQ8wb1 zTac^<ebj^E^Ig<?U?(PO-w>w;l#@9zGd|z-rs*H@V-o%PEV)D-)8n2%DyH5@w_^Y8 LH5R3RMV#gjxYTW} literal 0 HcmV?d00001 diff --git a/roms/Makefile b/roms/Makefile index XXXXXXX..XXXXXXX 100644 --- a/roms/Makefile +++ b/roms/Makefile @@ -XXX,XX +XXX,XX @@ find-cross-gcc = $(firstword $(wildcard $(patsubst %ld,%gcc,$(call find-cross-ld # finally strip off path + toolname so we get the prefix find-cross-prefix = $(subst gcc,,$(notdir $(call find-cross-gcc,$(1)))) +aarch64_cross_prefix := $(call find-cross-prefix,aarch64) arm_cross_prefix := $(call find-cross-prefix,arm) powerpc64_cross_prefix := $(call find-cross-prefix,powerpc64) powerpc_cross_prefix := $(call find-cross-prefix,powerpc) @@ -XXX,XX +XXX,XX @@ default help: @echo " u-boot.e500 -- update u-boot.e500" @echo " u-boot.sam460 -- update u-boot.sam460" @echo " npcm7xx_bootrom -- update vbootrom for npcm7xx" + @echo " npcm8xx_bootrom -- update vbootrom for npcm8xx" @echo " efi -- update UEFI (edk2) platform firmware" @echo " opensbi32-generic -- update OpenSBI for 32-bit generic machine" @echo " opensbi64-generic -- update OpenSBI for 64-bit generic machine" @@ -XXX,XX +XXX,XX @@ npcm7xx_bootrom: $(MAKE) -C vbootrom CROSS_COMPILE=$(arm_cross_prefix) cp vbootrom/npcm7xx_bootrom.bin ../pc-bios/npcm7xx_bootrom.bin +npcm8xx_bootrom: + $(MAKE) -C vbootrom CROSS_COMPILE=$(aarch64_cross_prefix) + cp vbootrom/npcm8xx_bootrom.bin ../pc-bios/npcm8xx_bootrom.bin + hppa-firmware: $(MAKE) -C seabios-hppa parisc cp seabios-hppa/out/hppa-firmware.img ../pc-bios/ -- 2.43.0 From: Hao Wu <wuhaotsh@google.com> This allows different FIUs to have different flash sizes, useful in NPCM8XX which has multiple different sized FIU modules. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Message-id: 20250219184609.1839281-4-wuhaotsh@google.com [PMM: flash_size must be a uint64_t to build on 32-bit hosts] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/ssi/npcm7xx_fiu.h | 1 + hw/arm/npcm7xx.c | 6 ++++++ hw/ssi/npcm7xx_fiu.c | 16 ++++++++++++++-- 3 files changed, 21 insertions(+), 2 deletions(-) diff --git a/include/hw/ssi/npcm7xx_fiu.h b/include/hw/ssi/npcm7xx_fiu.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/ssi/npcm7xx_fiu.h +++ b/include/hw/ssi/npcm7xx_fiu.h @@ -XXX,XX +XXX,XX @@ struct NPCM7xxFIUState { int32_t cs_count; int32_t active_cs; qemu_irq *cs_lines; + uint64_t flash_size; NPCM7xxFIUFlash *flash; SSIBus *spi; diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm7xx.c +++ b/hw/arm/npcm7xx.c @@ -XXX,XX +XXX,XX @@ static const struct { hwaddr regs_addr; int cs_count; const hwaddr *flash_addr; + size_t flash_size; } npcm7xx_fiu[] = { { .name = "fiu0", .regs_addr = 0xfb000000, .cs_count = ARRAY_SIZE(npcm7xx_fiu0_flash_addr), .flash_addr = npcm7xx_fiu0_flash_addr, + .flash_size = 128 * MiB, + }, { .name = "fiu3", .regs_addr = 0xc0000000, .cs_count = ARRAY_SIZE(npcm7xx_fiu3_flash_addr), .flash_addr = npcm7xx_fiu3_flash_addr, + .flash_size = 128 * MiB, }, }; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) object_property_set_int(OBJECT(sbd), "cs-count", npcm7xx_fiu[i].cs_count, &error_abort); + object_property_set_int(OBJECT(sbd), "flash-size", + npcm7xx_fiu[i].flash_size, &error_abort); sysbus_realize(sbd, &error_abort); sysbus_mmio_map(sbd, 0, npcm7xx_fiu[i].regs_addr); diff --git a/hw/ssi/npcm7xx_fiu.c b/hw/ssi/npcm7xx_fiu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/npcm7xx_fiu.c +++ b/hw/ssi/npcm7xx_fiu.c @@ -XXX,XX +XXX,XX @@ #include "trace.h" /* Up to 128 MiB of flash may be accessed directly as memory. */ -#define NPCM7XX_FIU_FLASH_WINDOW_SIZE (128 * MiB) +#define NPCM7XX_FIU_MAX_FLASH_WINDOW_SIZE (128 * MiB) /* Each module has 4 KiB of register space. Only a fraction of it is used. */ #define NPCM7XX_FIU_CTRL_REGS_SIZE (4 * KiB) @@ -XXX,XX +XXX,XX @@ static void npcm7xx_fiu_realize(DeviceState *dev, Error **errp) return; } + if (s->flash_size == 0) { + error_setg(errp, "%s: flash size must be set", dev->canonical_path); + return; + } + + if (s->flash_size > NPCM7XX_FIU_MAX_FLASH_WINDOW_SIZE) { + error_setg(errp, "%s: flash size should not exceed 128 MiB", + dev->canonical_path); + return; + } + s->spi = ssi_create_bus(dev, "spi"); s->cs_lines = g_new0(qemu_irq, s->cs_count); qdev_init_gpio_out_named(DEVICE(s), s->cs_lines, "cs", s->cs_count); @@ -XXX,XX +XXX,XX @@ static void npcm7xx_fiu_realize(DeviceState *dev, Error **errp) flash->fiu = s; memory_region_init_io(&flash->direct_access, OBJECT(s), &npcm7xx_fiu_flash_ops, &s->flash[i], "flash", - NPCM7XX_FIU_FLASH_WINDOW_SIZE); + s->flash_size); sysbus_init_mmio(sbd, &flash->direct_access); } } @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_npcm7xx_fiu = { static const Property npcm7xx_fiu_properties[] = { DEFINE_PROP_INT32("cs-count", NPCM7xxFIUState, cs_count, 0), + DEFINE_PROP_SIZE("flash-size", NPCM7xxFIUState, flash_size, 0), }; static void npcm7xx_fiu_class_init(ObjectClass *klass, void *data) -- 2.43.0 From: Hao Wu <wuhaotsh@google.com> NPCM7XX and NPCM8XX have a different set of GCRs and the GCR module needs to fit both. This commit changes the name of the GCR module. Future commits will add the support for NPCM8XX GCRs. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20250219184609.1839281-5-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/npcm7xx.h | 2 +- include/hw/misc/{npcm7xx_gcr.h => npcm_gcr.h} | 6 +++--- hw/misc/{npcm7xx_gcr.c => npcm_gcr.c} | 2 +- hw/misc/meson.build | 2 +- 4 files changed, 6 insertions(+), 6 deletions(-) rename include/hw/misc/{npcm7xx_gcr.h => npcm_gcr.h} (96%) rename hw/misc/{npcm7xx_gcr.c => npcm_gcr.c} (99%) diff --git a/include/hw/arm/npcm7xx.h b/include/hw/arm/npcm7xx.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/npcm7xx.h +++ b/include/hw/arm/npcm7xx.h @@ -XXX,XX +XXX,XX @@ #include "hw/i2c/npcm7xx_smbus.h" #include "hw/mem/npcm7xx_mc.h" #include "hw/misc/npcm7xx_clk.h" -#include "hw/misc/npcm7xx_gcr.h" +#include "hw/misc/npcm_gcr.h" #include "hw/misc/npcm7xx_mft.h" #include "hw/misc/npcm7xx_pwm.h" #include "hw/misc/npcm7xx_rng.h" diff --git a/include/hw/misc/npcm7xx_gcr.h b/include/hw/misc/npcm_gcr.h similarity index 96% rename from include/hw/misc/npcm7xx_gcr.h rename to include/hw/misc/npcm_gcr.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/npcm7xx_gcr.h +++ b/include/hw/misc/npcm_gcr.h @@ -XXX,XX +XXX,XX @@ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License * for more details. */ -#ifndef NPCM7XX_GCR_H -#define NPCM7XX_GCR_H +#ifndef NPCM_GCR_H +#define NPCM_GCR_H #include "exec/memory.h" #include "hw/sysbus.h" @@ -XXX,XX +XXX,XX @@ struct NPCM7xxGCRState { #define TYPE_NPCM7XX_GCR "npcm7xx-gcr" OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxGCRState, NPCM7XX_GCR) -#endif /* NPCM7XX_GCR_H */ +#endif /* NPCM_GCR_H */ diff --git a/hw/misc/npcm7xx_gcr.c b/hw/misc/npcm_gcr.c similarity index 99% rename from hw/misc/npcm7xx_gcr.c rename to hw/misc/npcm_gcr.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/npcm7xx_gcr.c +++ b/hw/misc/npcm_gcr.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" -#include "hw/misc/npcm7xx_gcr.h" +#include "hw/misc/npcm_gcr.h" #include "hw/qdev-properties.h" #include "migration/vmstate.h" #include "qapi/error.h" diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ system_ss.add(when: 'CONFIG_IMX', if_true: files( )) system_ss.add(when: 'CONFIG_NPCM7XX', if_true: files( 'npcm7xx_clk.c', - 'npcm7xx_gcr.c', + 'npcm_gcr.c', 'npcm7xx_mft.c', 'npcm7xx_pwm.c', 'npcm7xx_rng.c', -- 2.43.0 From: Hao Wu <wuhaotsh@google.com> A lot of NPCM7XX and NPCM8XX GCR modules share the same code, this commit moves the NPCM7XX GCR to NPCM GCR for these properties. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20250219184609.1839281-6-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/npcm7xx.h | 2 +- include/hw/misc/npcm_gcr.h | 7 +-- hw/misc/npcm_gcr.c | 92 +++++++++++++++++++++----------------- hw/misc/trace-events | 6 +-- 4 files changed, 59 insertions(+), 48 deletions(-) diff --git a/include/hw/arm/npcm7xx.h b/include/hw/arm/npcm7xx.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/npcm7xx.h +++ b/include/hw/arm/npcm7xx.h @@ -XXX,XX +XXX,XX @@ struct NPCM7xxState { MemoryRegion ram3; MemoryRegion *dram; - NPCM7xxGCRState gcr; + NPCMGCRState gcr; NPCM7xxCLKState clk; NPCM7xxTimerCtrlState tim[3]; NPCM7xxADCState adc; diff --git a/include/hw/misc/npcm_gcr.h b/include/hw/misc/npcm_gcr.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/npcm_gcr.h +++ b/include/hw/misc/npcm_gcr.h @@ -XXX,XX +XXX,XX @@ */ #define NPCM7XX_GCR_NR_REGS (0x148 / sizeof(uint32_t)) -struct NPCM7xxGCRState { +typedef struct NPCMGCRState { SysBusDevice parent; MemoryRegion iomem; @@ -XXX,XX +XXX,XX @@ struct NPCM7xxGCRState { uint32_t reset_pwron; uint32_t reset_mdlr; uint32_t reset_intcr3; -}; +} NPCMGCRState; +#define TYPE_NPCM_GCR "npcm-gcr" #define TYPE_NPCM7XX_GCR "npcm7xx-gcr" -OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxGCRState, NPCM7XX_GCR) +OBJECT_DECLARE_SIMPLE_TYPE(NPCMGCRState, NPCM_GCR) #endif /* NPCM_GCR_H */ diff --git a/hw/misc/npcm_gcr.c b/hw/misc/npcm_gcr.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/npcm_gcr.c +++ b/hw/misc/npcm_gcr.c @@ -XXX,XX +XXX,XX @@ static const uint32_t cold_reset_values[NPCM7XX_GCR_NR_REGS] = { [NPCM7XX_GCR_USB2PHYCTL] = 0x034730e4, }; -static uint64_t npcm7xx_gcr_read(void *opaque, hwaddr offset, unsigned size) +static uint64_t npcm_gcr_read(void *opaque, hwaddr offset, unsigned size) { uint32_t reg = offset / sizeof(uint32_t); - NPCM7xxGCRState *s = opaque; + NPCMGCRState *s = opaque; if (reg >= NPCM7XX_GCR_NR_REGS) { qemu_log_mask(LOG_GUEST_ERROR, @@ -XXX,XX +XXX,XX @@ static uint64_t npcm7xx_gcr_read(void *opaque, hwaddr offset, unsigned size) return 0; } - trace_npcm7xx_gcr_read(offset, s->regs[reg]); + trace_npcm_gcr_read(offset, s->regs[reg]); return s->regs[reg]; } -static void npcm7xx_gcr_write(void *opaque, hwaddr offset, +static void npcm_gcr_write(void *opaque, hwaddr offset, uint64_t v, unsigned size) { uint32_t reg = offset / sizeof(uint32_t); - NPCM7xxGCRState *s = opaque; + NPCMGCRState *s = opaque; uint32_t value = v; - trace_npcm7xx_gcr_write(offset, value); + trace_npcm_gcr_write(offset, value); if (reg >= NPCM7XX_GCR_NR_REGS) { qemu_log_mask(LOG_GUEST_ERROR, @@ -XXX,XX +XXX,XX @@ static void npcm7xx_gcr_write(void *opaque, hwaddr offset, s->regs[reg] = value; } -static const struct MemoryRegionOps npcm7xx_gcr_ops = { - .read = npcm7xx_gcr_read, - .write = npcm7xx_gcr_write, +static const struct MemoryRegionOps npcm_gcr_ops = { + .read = npcm_gcr_read, + .write = npcm_gcr_write, .endianness = DEVICE_LITTLE_ENDIAN, .valid = { .min_access_size = 4, @@ -XXX,XX +XXX,XX @@ static const struct MemoryRegionOps npcm7xx_gcr_ops = { static void npcm7xx_gcr_enter_reset(Object *obj, ResetType type) { - NPCM7xxGCRState *s = NPCM7XX_GCR(obj); + NPCMGCRState *s = NPCM_GCR(obj); QEMU_BUILD_BUG_ON(sizeof(s->regs) != sizeof(cold_reset_values)); @@ -XXX,XX +XXX,XX @@ static void npcm7xx_gcr_enter_reset(Object *obj, ResetType type) s->regs[NPCM7XX_GCR_INTCR3] = s->reset_intcr3; } -static void npcm7xx_gcr_realize(DeviceState *dev, Error **errp) +static void npcm_gcr_realize(DeviceState *dev, Error **errp) { ERRP_GUARD(); - NPCM7xxGCRState *s = NPCM7XX_GCR(dev); + NPCMGCRState *s = NPCM_GCR(dev); uint64_t dram_size; Object *obj; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_gcr_realize(DeviceState *dev, Error **errp) s->reset_intcr3 |= ctz64(dram_size / NPCM7XX_GCR_MIN_DRAM_SIZE) << 8; } -static void npcm7xx_gcr_init(Object *obj) +static void npcm_gcr_init(Object *obj) { - NPCM7xxGCRState *s = NPCM7XX_GCR(obj); + NPCMGCRState *s = NPCM_GCR(obj); - memory_region_init_io(&s->iomem, obj, &npcm7xx_gcr_ops, s, - TYPE_NPCM7XX_GCR, 4 * KiB); + memory_region_init_io(&s->iomem, obj, &npcm_gcr_ops, s, + TYPE_NPCM_GCR, 4 * KiB); sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->iomem); } -static const VMStateDescription vmstate_npcm7xx_gcr = { - .name = "npcm7xx-gcr", - .version_id = 0, - .minimum_version_id = 0, +static const VMStateDescription vmstate_npcm_gcr = { + .name = "npcm-gcr", + .version_id = 1, + .minimum_version_id = 1, .fields = (const VMStateField[]) { - VMSTATE_UINT32_ARRAY(regs, NPCM7xxGCRState, NPCM7XX_GCR_NR_REGS), + VMSTATE_UINT32_ARRAY(regs, NPCMGCRState, NPCM7XX_GCR_NR_REGS), VMSTATE_END_OF_LIST(), }, }; -static const Property npcm7xx_gcr_properties[] = { - DEFINE_PROP_UINT32("disabled-modules", NPCM7xxGCRState, reset_mdlr, 0), - DEFINE_PROP_UINT32("power-on-straps", NPCM7xxGCRState, reset_pwron, 0), +static const Property npcm_gcr_properties[] = { + DEFINE_PROP_UINT32("disabled-modules", NPCMGCRState, reset_mdlr, 0), + DEFINE_PROP_UINT32("power-on-straps", NPCMGCRState, reset_pwron, 0), }; -static void npcm7xx_gcr_class_init(ObjectClass *klass, void *data) +static void npcm_gcr_class_init(ObjectClass *klass, void *data) { - ResettableClass *rc = RESETTABLE_CLASS(klass); DeviceClass *dc = DEVICE_CLASS(klass); QEMU_BUILD_BUG_ON(NPCM7XX_GCR_REGS_END > NPCM7XX_GCR_NR_REGS); + dc->realize = npcm_gcr_realize; + dc->vmsd = &vmstate_npcm_gcr; + device_class_set_props(dc, npcm_gcr_properties); +} + +static void npcm7xx_gcr_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + QEMU_BUILD_BUG_ON(NPCM7XX_GCR_REGS_END != NPCM7XX_GCR_NR_REGS); dc->desc = "NPCM7xx System Global Control Registers"; - dc->realize = npcm7xx_gcr_realize; - dc->vmsd = &vmstate_npcm7xx_gcr; rc->phases.enter = npcm7xx_gcr_enter_reset; - device_class_set_props(dc, npcm7xx_gcr_properties); } -static const TypeInfo npcm7xx_gcr_info = { - .name = TYPE_NPCM7XX_GCR, - .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(NPCM7xxGCRState), - .instance_init = npcm7xx_gcr_init, - .class_init = npcm7xx_gcr_class_init, +static const TypeInfo npcm_gcr_info[] = { + { + .name = TYPE_NPCM_GCR, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(NPCMGCRState), + .instance_init = npcm_gcr_init, + .class_init = npcm_gcr_class_init, + .abstract = true, + }, + { + .name = TYPE_NPCM7XX_GCR, + .parent = TYPE_NPCM_GCR, + .class_init = npcm7xx_gcr_class_init, + }, }; - -static void npcm7xx_gcr_register_type(void) -{ - type_register_static(&npcm7xx_gcr_info); -} -type_init(npcm7xx_gcr_register_type); +DEFINE_TYPES(npcm_gcr_info) diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ mos6522_read(uint64_t addr, const char *name, unsigned val) "reg=0x%"PRIx64 " [% npcm7xx_clk_read(uint64_t offset, uint32_t value) " offset: 0x%04" PRIx64 " value: 0x%08" PRIx32 npcm7xx_clk_write(uint64_t offset, uint32_t value) "offset: 0x%04" PRIx64 " value: 0x%08" PRIx32 -# npcm7xx_gcr.c -npcm7xx_gcr_read(uint64_t offset, uint32_t value) " offset: 0x%04" PRIx64 " value: 0x%08" PRIx32 -npcm7xx_gcr_write(uint64_t offset, uint32_t value) "offset: 0x%04" PRIx64 " value: 0x%08" PRIx32 +# npcm_gcr.c +npcm_gcr_read(uint64_t offset, uint32_t value) " offset: 0x%04" PRIx64 " value: 0x%08" PRIx32 +npcm_gcr_write(uint64_t offset, uint32_t value) "offset: 0x%04" PRIx64 " value: 0x%08" PRIx32 # npcm7xx_mft.c npcm7xx_mft_read(const char *name, uint64_t offset, uint16_t value) "%s: offset: 0x%04" PRIx64 " value: 0x%04" PRIx16 -- 2.43.0 From: Hao Wu <wuhaotsh@google.com> These 2 values are different between NPCM7XX and NPCM8XX GCRs. So we add them to the class and assign different values to them. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20250219184609.1839281-7-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/npcm_gcr.h | 13 +++++++++++-- hw/misc/npcm_gcr.c | 27 ++++++++++++++++----------- 2 files changed, 27 insertions(+), 13 deletions(-) diff --git a/include/hw/misc/npcm_gcr.h b/include/hw/misc/npcm_gcr.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/npcm_gcr.h +++ b/include/hw/misc/npcm_gcr.h @@ -XXX,XX +XXX,XX @@ #include "exec/memory.h" #include "hw/sysbus.h" +#include "qom/object.h" /* * NPCM7XX PWRON STRAP bit fields @@ -XXX,XX +XXX,XX @@ * Number of registers in our device state structure. Don't change this without * incrementing the version_id in the vmstate. */ +#define NPCM_GCR_MAX_NR_REGS NPCM7XX_GCR_NR_REGS #define NPCM7XX_GCR_NR_REGS (0x148 / sizeof(uint32_t)) typedef struct NPCMGCRState { @@ -XXX,XX +XXX,XX @@ typedef struct NPCMGCRState { MemoryRegion iomem; - uint32_t regs[NPCM7XX_GCR_NR_REGS]; + uint32_t regs[NPCM_GCR_MAX_NR_REGS]; uint32_t reset_pwron; uint32_t reset_mdlr; uint32_t reset_intcr3; } NPCMGCRState; +typedef struct NPCMGCRClass { + SysBusDeviceClass parent; + + size_t nr_regs; + const uint32_t *cold_reset_values; +} NPCMGCRClass; + #define TYPE_NPCM_GCR "npcm-gcr" #define TYPE_NPCM7XX_GCR "npcm7xx-gcr" -OBJECT_DECLARE_SIMPLE_TYPE(NPCMGCRState, NPCM_GCR) +OBJECT_DECLARE_TYPE(NPCMGCRState, NPCMGCRClass, NPCM_GCR) #endif /* NPCM_GCR_H */ diff --git a/hw/misc/npcm_gcr.c b/hw/misc/npcm_gcr.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/npcm_gcr.c +++ b/hw/misc/npcm_gcr.c @@ -XXX,XX +XXX,XX @@ enum NPCM7xxGCRRegisters { NPCM7XX_GCR_SCRPAD = 0x013c / sizeof(uint32_t), NPCM7XX_GCR_USB1PHYCTL, NPCM7XX_GCR_USB2PHYCTL, - NPCM7XX_GCR_REGS_END, }; -static const uint32_t cold_reset_values[NPCM7XX_GCR_NR_REGS] = { +static const uint32_t npcm7xx_cold_reset_values[NPCM7XX_GCR_NR_REGS] = { [NPCM7XX_GCR_PDID] = 0x04a92750, /* Poleg A1 */ [NPCM7XX_GCR_MISCPE] = 0x0000ffff, [NPCM7XX_GCR_SPSWC] = 0x00000003, @@ -XXX,XX +XXX,XX @@ static uint64_t npcm_gcr_read(void *opaque, hwaddr offset, unsigned size) { uint32_t reg = offset / sizeof(uint32_t); NPCMGCRState *s = opaque; + NPCMGCRClass *c = NPCM_GCR_GET_CLASS(s); - if (reg >= NPCM7XX_GCR_NR_REGS) { + if (reg >= c->nr_regs) { qemu_log_mask(LOG_GUEST_ERROR, "%s: offset 0x%04" HWADDR_PRIx " out of range\n", __func__, offset); @@ -XXX,XX +XXX,XX @@ static void npcm_gcr_write(void *opaque, hwaddr offset, { uint32_t reg = offset / sizeof(uint32_t); NPCMGCRState *s = opaque; + NPCMGCRClass *c = NPCM_GCR_GET_CLASS(s); uint32_t value = v; - trace_npcm_gcr_write(offset, value); + trace_npcm_gcr_write(offset, v); - if (reg >= NPCM7XX_GCR_NR_REGS) { + if (reg >= c->nr_regs) { qemu_log_mask(LOG_GUEST_ERROR, "%s: offset 0x%04" HWADDR_PRIx " out of range\n", __func__, offset); @@ -XXX,XX +XXX,XX @@ static const struct MemoryRegionOps npcm_gcr_ops = { static void npcm7xx_gcr_enter_reset(Object *obj, ResetType type) { NPCMGCRState *s = NPCM_GCR(obj); + NPCMGCRClass *c = NPCM_GCR_GET_CLASS(obj); - QEMU_BUILD_BUG_ON(sizeof(s->regs) != sizeof(cold_reset_values)); - - memcpy(s->regs, cold_reset_values, sizeof(s->regs)); + g_assert(sizeof(s->regs) >= sizeof(c->cold_reset_values)); + g_assert(sizeof(s->regs) >= c->nr_regs * sizeof(uint32_t)); + memcpy(s->regs, c->cold_reset_values, c->nr_regs * sizeof(uint32_t)); + /* These 3 registers are at the same location in both 7xx and 8xx. */ s->regs[NPCM7XX_GCR_PWRON] = s->reset_pwron; s->regs[NPCM7XX_GCR_MDLR] = s->reset_mdlr; s->regs[NPCM7XX_GCR_INTCR3] = s->reset_intcr3; @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_npcm_gcr = { .version_id = 1, .minimum_version_id = 1, .fields = (const VMStateField[]) { - VMSTATE_UINT32_ARRAY(regs, NPCMGCRState, NPCM7XX_GCR_NR_REGS), + VMSTATE_UINT32_ARRAY(regs, NPCMGCRState, NPCM_GCR_MAX_NR_REGS), VMSTATE_END_OF_LIST(), }, }; @@ -XXX,XX +XXX,XX @@ static void npcm_gcr_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); - QEMU_BUILD_BUG_ON(NPCM7XX_GCR_REGS_END > NPCM7XX_GCR_NR_REGS); dc->realize = npcm_gcr_realize; dc->vmsd = &vmstate_npcm_gcr; @@ -XXX,XX +XXX,XX @@ static void npcm_gcr_class_init(ObjectClass *klass, void *data) static void npcm7xx_gcr_class_init(ObjectClass *klass, void *data) { + NPCMGCRClass *c = NPCM_GCR_CLASS(klass); DeviceClass *dc = DEVICE_CLASS(klass); ResettableClass *rc = RESETTABLE_CLASS(klass); - QEMU_BUILD_BUG_ON(NPCM7XX_GCR_REGS_END != NPCM7XX_GCR_NR_REGS); dc->desc = "NPCM7xx System Global Control Registers"; rc->phases.enter = npcm7xx_gcr_enter_reset; + c->nr_regs = NPCM7XX_GCR_NR_REGS; + c->cold_reset_values = npcm7xx_cold_reset_values; } static const TypeInfo npcm_gcr_info[] = { @@ -XXX,XX +XXX,XX @@ static const TypeInfo npcm_gcr_info[] = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(NPCMGCRState), .instance_init = npcm_gcr_init, + .class_size = sizeof(NPCMGCRClass), .class_init = npcm_gcr_class_init, .abstract = true, }, -- 2.43.0 From: Hao Wu <wuhaotsh@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20250219184609.1839281-8-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/npcm_gcr.h | 6 +- hw/misc/npcm_gcr.c | 133 ++++++++++++++++++++++++++++++++++++- 2 files changed, 134 insertions(+), 5 deletions(-) diff --git a/include/hw/misc/npcm_gcr.h b/include/hw/misc/npcm_gcr.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/npcm_gcr.h +++ b/include/hw/misc/npcm_gcr.h @@ -XXX,XX +XXX,XX @@ /* - * Nuvoton NPCM7xx System Global Control Registers. + * Nuvoton NPCM7xx/8xx System Global Control Registers. * * Copyright 2020 Google LLC * @@ -XXX,XX +XXX,XX @@ * Number of registers in our device state structure. Don't change this without * incrementing the version_id in the vmstate. */ -#define NPCM_GCR_MAX_NR_REGS NPCM7XX_GCR_NR_REGS +#define NPCM_GCR_MAX_NR_REGS NPCM8XX_GCR_NR_REGS #define NPCM7XX_GCR_NR_REGS (0x148 / sizeof(uint32_t)) +#define NPCM8XX_GCR_NR_REGS (0xf80 / sizeof(uint32_t)) typedef struct NPCMGCRState { SysBusDevice parent; @@ -XXX,XX +XXX,XX @@ typedef struct NPCMGCRClass { #define TYPE_NPCM_GCR "npcm-gcr" #define TYPE_NPCM7XX_GCR "npcm7xx-gcr" +#define TYPE_NPCM8XX_GCR "npcm8xx-gcr" OBJECT_DECLARE_TYPE(NPCMGCRState, NPCMGCRClass, NPCM_GCR) #endif /* NPCM_GCR_H */ diff --git a/hw/misc/npcm_gcr.c b/hw/misc/npcm_gcr.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/npcm_gcr.c +++ b/hw/misc/npcm_gcr.c @@ -XXX,XX +XXX,XX @@ /* - * Nuvoton NPCM7xx System Global Control Registers. + * Nuvoton NPCM7xx/8xx System Global Control Registers. * * Copyright 2020 Google LLC * @@ -XXX,XX +XXX,XX @@ static const uint32_t npcm7xx_cold_reset_values[NPCM7XX_GCR_NR_REGS] = { [NPCM7XX_GCR_USB2PHYCTL] = 0x034730e4, }; +enum NPCM8xxGCRRegisters { + NPCM8XX_GCR_PDID, + NPCM8XX_GCR_PWRON, + NPCM8XX_GCR_MISCPE = 0x014 / sizeof(uint32_t), + NPCM8XX_GCR_FLOCKR2 = 0x020 / sizeof(uint32_t), + NPCM8XX_GCR_FLOCKR3, + NPCM8XX_GCR_A35_MODE = 0x034 / sizeof(uint32_t), + NPCM8XX_GCR_SPSWC, + NPCM8XX_GCR_INTCR, + NPCM8XX_GCR_INTSR, + NPCM8XX_GCR_HIFCR = 0x050 / sizeof(uint32_t), + NPCM8XX_GCR_INTCR2 = 0x060 / sizeof(uint32_t), + NPCM8XX_GCR_SRCNT = 0x068 / sizeof(uint32_t), + NPCM8XX_GCR_RESSR, + NPCM8XX_GCR_RLOCKR1, + NPCM8XX_GCR_FLOCKR1, + NPCM8XX_GCR_DSCNT, + NPCM8XX_GCR_MDLR, + NPCM8XX_GCR_SCRPAD_C = 0x080 / sizeof(uint32_t), + NPCM8XX_GCR_SCRPAD_B, + NPCM8XX_GCR_DAVCLVLR = 0x098 / sizeof(uint32_t), + NPCM8XX_GCR_INTCR3, + NPCM8XX_GCR_PCIRCTL = 0x0a0 / sizeof(uint32_t), + NPCM8XX_GCR_VSINTR, + NPCM8XX_GCR_SD2SUR1 = 0x0b4 / sizeof(uint32_t), + NPCM8XX_GCR_SD2SUR2, + NPCM8XX_GCR_INTCR4 = 0x0c0 / sizeof(uint32_t), + NPCM8XX_GCR_CPCTL = 0x0d0 / sizeof(uint32_t), + NPCM8XX_GCR_CP2BST, + NPCM8XX_GCR_B2CPNT, + NPCM8XX_GCR_CPPCTL, + NPCM8XX_GCR_I2CSEGSEL = 0x0e0 / sizeof(uint32_t), + NPCM8XX_GCR_I2CSEGCTL, + NPCM8XX_GCR_VSRCR, + NPCM8XX_GCR_MLOCKR, + NPCM8XX_GCR_SCRPAD = 0x13c / sizeof(uint32_t), + NPCM8XX_GCR_USB1PHYCTL, + NPCM8XX_GCR_USB2PHYCTL, + NPCM8XX_GCR_USB3PHYCTL, + NPCM8XX_GCR_MFSEL1 = 0x260 / sizeof(uint32_t), + NPCM8XX_GCR_MFSEL2, + NPCM8XX_GCR_MFSEL3, + NPCM8XX_GCR_MFSEL4, + NPCM8XX_GCR_MFSEL5, + NPCM8XX_GCR_MFSEL6, + NPCM8XX_GCR_MFSEL7, + NPCM8XX_GCR_MFSEL_LK1 = 0x280 / sizeof(uint32_t), + NPCM8XX_GCR_MFSEL_LK2, + NPCM8XX_GCR_MFSEL_LK3, + NPCM8XX_GCR_MFSEL_LK4, + NPCM8XX_GCR_MFSEL_LK5, + NPCM8XX_GCR_MFSEL_LK6, + NPCM8XX_GCR_MFSEL_LK7, + NPCM8XX_GCR_MFSEL_SET1 = 0x2a0 / sizeof(uint32_t), + NPCM8XX_GCR_MFSEL_SET2, + NPCM8XX_GCR_MFSEL_SET3, + NPCM8XX_GCR_MFSEL_SET4, + NPCM8XX_GCR_MFSEL_SET5, + NPCM8XX_GCR_MFSEL_SET6, + NPCM8XX_GCR_MFSEL_SET7, + NPCM8XX_GCR_MFSEL_CLR1 = 0x2c0 / sizeof(uint32_t), + NPCM8XX_GCR_MFSEL_CLR2, + NPCM8XX_GCR_MFSEL_CLR3, + NPCM8XX_GCR_MFSEL_CLR4, + NPCM8XX_GCR_MFSEL_CLR5, + NPCM8XX_GCR_MFSEL_CLR6, + NPCM8XX_GCR_MFSEL_CLR7, + NPCM8XX_GCR_WD0RCRLK = 0x400 / sizeof(uint32_t), + NPCM8XX_GCR_WD1RCRLK, + NPCM8XX_GCR_WD2RCRLK, + NPCM8XX_GCR_SWRSTC1LK, + NPCM8XX_GCR_SWRSTC2LK, + NPCM8XX_GCR_SWRSTC3LK, + NPCM8XX_GCR_TIPRSTCLK, + NPCM8XX_GCR_CORSTCLK, + NPCM8XX_GCR_WD0RCRBLK, + NPCM8XX_GCR_WD1RCRBLK, + NPCM8XX_GCR_WD2RCRBLK, + NPCM8XX_GCR_SWRSTC1BLK, + NPCM8XX_GCR_SWRSTC2BLK, + NPCM8XX_GCR_SWRSTC3BLK, + NPCM8XX_GCR_TIPRSTCBLK, + NPCM8XX_GCR_CORSTCBLK, + /* 64 scratch pad registers start here. 0xe00 ~ 0xefc */ + NPCM8XX_GCR_SCRPAD_00 = 0xe00 / sizeof(uint32_t), + /* 32 semaphore registers start here. 0xf00 ~ 0xf7c */ + NPCM8XX_GCR_GP_SEMFR_00 = 0xf00 / sizeof(uint32_t), + NPCM8XX_GCR_GP_SEMFR_31 = 0xf7c / sizeof(uint32_t), +}; + +static const uint32_t npcm8xx_cold_reset_values[NPCM8XX_GCR_NR_REGS] = { + [NPCM8XX_GCR_PDID] = 0x04a35850, /* Arbel A1 */ + [NPCM8XX_GCR_MISCPE] = 0x0000ffff, + [NPCM8XX_GCR_A35_MODE] = 0xfff4ff30, + [NPCM8XX_GCR_SPSWC] = 0x00000003, + [NPCM8XX_GCR_INTCR] = 0x0010035e, + [NPCM8XX_GCR_HIFCR] = 0x0000004e, + [NPCM8XX_GCR_SD2SUR1] = 0xfdc80000, + [NPCM8XX_GCR_SD2SUR2] = 0x5200b130, + [NPCM8XX_GCR_INTCR2] = (1U << 19), /* DDR initialized */ + [NPCM8XX_GCR_RESSR] = 0x80000000, + [NPCM8XX_GCR_DAVCLVLR] = 0x5a00f3cf, + [NPCM8XX_GCR_INTCR3] = 0x5e001002, + [NPCM8XX_GCR_VSRCR] = 0x00004800, + [NPCM8XX_GCR_SCRPAD] = 0x00000008, + [NPCM8XX_GCR_USB1PHYCTL] = 0x034730e4, + [NPCM8XX_GCR_USB2PHYCTL] = 0x034730e4, + [NPCM8XX_GCR_USB3PHYCTL] = 0x034730e4, + /* All 32 semaphores should be initialized to 1. */ + [NPCM8XX_GCR_GP_SEMFR_00...NPCM8XX_GCR_GP_SEMFR_31] = 0x00000001, +}; + static uint64_t npcm_gcr_read(void *opaque, hwaddr offset, unsigned size) { uint32_t reg = offset / sizeof(uint32_t); @@ -XXX,XX +XXX,XX @@ static void npcm_gcr_init(Object *obj) static const VMStateDescription vmstate_npcm_gcr = { .name = "npcm-gcr", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (const VMStateField[]) { VMSTATE_UINT32_ARRAY(regs, NPCMGCRState, NPCM_GCR_MAX_NR_REGS), VMSTATE_END_OF_LIST(), @@ -XXX,XX +XXX,XX @@ static void npcm7xx_gcr_class_init(ObjectClass *klass, void *data) c->cold_reset_values = npcm7xx_cold_reset_values; } +static void npcm8xx_gcr_class_init(ObjectClass *klass, void *data) +{ + NPCMGCRClass *c = NPCM_GCR_CLASS(klass); + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->desc = "NPCM8xx System Global Control Registers"; + c->nr_regs = NPCM8XX_GCR_NR_REGS; + c->cold_reset_values = npcm8xx_cold_reset_values; +} + static const TypeInfo npcm_gcr_info[] = { { .name = TYPE_NPCM_GCR, @@ -XXX,XX +XXX,XX @@ static const TypeInfo npcm_gcr_info[] = { .parent = TYPE_NPCM_GCR, .class_init = npcm7xx_gcr_class_init, }, + { + .name = TYPE_NPCM8XX_GCR, + .parent = TYPE_NPCM_GCR, + .class_init = npcm8xx_gcr_class_init, + }, }; DEFINE_TYPES(npcm_gcr_info) -- 2.43.0 From: Hao Wu <wuhaotsh@google.com> NPCM8XX boot block stores the DRAM size in SCRPAD_B register in GCR module. Since we don't simulate a detailed memory controller, we need to store this information directly similar to the NPCM7XX's INCTR3 register. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20250219184609.1839281-9-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/npcm_gcr.h | 1 + hw/misc/npcm_gcr.c | 24 ++++++++++++++++++++++++ 2 files changed, 25 insertions(+) diff --git a/include/hw/misc/npcm_gcr.h b/include/hw/misc/npcm_gcr.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/npcm_gcr.h +++ b/include/hw/misc/npcm_gcr.h @@ -XXX,XX +XXX,XX @@ typedef struct NPCMGCRState { uint32_t reset_pwron; uint32_t reset_mdlr; uint32_t reset_intcr3; + uint32_t reset_scrpad_b; } NPCMGCRState; typedef struct NPCMGCRClass { diff --git a/hw/misc/npcm_gcr.c b/hw/misc/npcm_gcr.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/npcm_gcr.c +++ b/hw/misc/npcm_gcr.c @@ -XXX,XX +XXX,XX @@ static void npcm7xx_gcr_enter_reset(Object *obj, ResetType type) s->regs[NPCM7XX_GCR_INTCR3] = s->reset_intcr3; } +static void npcm8xx_gcr_enter_reset(Object *obj, ResetType type) +{ + NPCMGCRState *s = NPCM_GCR(obj); + NPCMGCRClass *c = NPCM_GCR_GET_CLASS(obj); + + memcpy(s->regs, c->cold_reset_values, c->nr_regs * sizeof(uint32_t)); + /* These 3 registers are at the same location in both 7xx and 8xx. */ + s->regs[NPCM8XX_GCR_PWRON] = s->reset_pwron; + s->regs[NPCM8XX_GCR_MDLR] = s->reset_mdlr; + s->regs[NPCM8XX_GCR_INTCR3] = s->reset_intcr3; + s->regs[NPCM8XX_GCR_SCRPAD_B] = s->reset_scrpad_b; +} + static void npcm_gcr_realize(DeviceState *dev, Error **errp) { ERRP_GUARD(); @@ -XXX,XX +XXX,XX @@ static void npcm_gcr_realize(DeviceState *dev, Error **errp) * https://github.com/Nuvoton-Israel/u-boot/blob/2aef993bd2aafeb5408dbaad0f3ce099ee40c4aa/board/nuvoton/poleg/poleg.c#L244 */ s->reset_intcr3 |= ctz64(dram_size / NPCM7XX_GCR_MIN_DRAM_SIZE) << 8; + + /* + * The boot block starting from 0.0.6 for NPCM8xx SoCs stores the DRAM size + * in the SCRPAD2 registers. We need to set this field correctly since + * the initialization is skipped as we mentioned above. + * https://github.com/Nuvoton-Israel/u-boot/blob/npcm8mnx-v2019.01_tmp/board/nuvoton/arbel/arbel.c#L737 + */ + s->reset_scrpad_b = dram_size; } static void npcm_gcr_init(Object *obj) @@ -XXX,XX +XXX,XX @@ static void npcm7xx_gcr_class_init(ObjectClass *klass, void *data) c->nr_regs = NPCM7XX_GCR_NR_REGS; c->cold_reset_values = npcm7xx_cold_reset_values; + rc->phases.enter = npcm7xx_gcr_enter_reset; } static void npcm8xx_gcr_class_init(ObjectClass *klass, void *data) { NPCMGCRClass *c = NPCM_GCR_CLASS(klass); DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); dc->desc = "NPCM8xx System Global Control Registers"; c->nr_regs = NPCM8XX_GCR_NR_REGS; c->cold_reset_values = npcm8xx_cold_reset_values; + rc->phases.enter = npcm8xx_gcr_enter_reset; } static const TypeInfo npcm_gcr_info[] = { -- 2.43.0 From: Hao Wu <wuhaotsh@google.com> The NPCM8xx GCR device can be accessed with 64-bit memory operations. This patch supports that. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Message-id: 20250219184609.1839281-10-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/npcm_gcr.c | 92 ++++++++++++++++++++++++++++++++++---------- hw/misc/trace-events | 4 +- 2 files changed, 73 insertions(+), 23 deletions(-) diff --git a/hw/misc/npcm_gcr.c b/hw/misc/npcm_gcr.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/npcm_gcr.c +++ b/hw/misc/npcm_gcr.c @@ -XXX,XX +XXX,XX @@ static uint64_t npcm_gcr_read(void *opaque, hwaddr offset, unsigned size) uint32_t reg = offset / sizeof(uint32_t); NPCMGCRState *s = opaque; NPCMGCRClass *c = NPCM_GCR_GET_CLASS(s); + uint64_t value; if (reg >= c->nr_regs) { qemu_log_mask(LOG_GUEST_ERROR, @@ -XXX,XX +XXX,XX @@ static uint64_t npcm_gcr_read(void *opaque, hwaddr offset, unsigned size) return 0; } - trace_npcm_gcr_read(offset, s->regs[reg]); + switch (size) { + case 4: + value = s->regs[reg]; + break; - return s->regs[reg]; + case 8: + value = deposit64(s->regs[reg], 32, 32, s->regs[reg + 1]); + break; + + default: + g_assert_not_reached(); + } + + trace_npcm_gcr_read(offset, value); + return value; } static void npcm_gcr_write(void *opaque, hwaddr offset, @@ -XXX,XX +XXX,XX @@ static void npcm_gcr_write(void *opaque, hwaddr offset, return; } - switch (reg) { - case NPCM7XX_GCR_PDID: - case NPCM7XX_GCR_PWRON: - case NPCM7XX_GCR_INTSR: - qemu_log_mask(LOG_GUEST_ERROR, - "%s: register @ 0x%04" HWADDR_PRIx " is read-only\n", - __func__, offset); - return; + switch (size) { + case 4: + switch (reg) { + case NPCM7XX_GCR_PDID: + case NPCM7XX_GCR_PWRON: + case NPCM7XX_GCR_INTSR: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: register @ 0x%04" HWADDR_PRIx " is read-only\n", + __func__, offset); + return; - case NPCM7XX_GCR_RESSR: - case NPCM7XX_GCR_CP2BST: - /* Write 1 to clear */ - value = s->regs[reg] & ~value; + case NPCM7XX_GCR_RESSR: + case NPCM7XX_GCR_CP2BST: + /* Write 1 to clear */ + value = s->regs[reg] & ~value; + break; + + case NPCM7XX_GCR_RLOCKR1: + case NPCM7XX_GCR_MDLR: + /* Write 1 to set */ + value |= s->regs[reg]; + break; + }; + s->regs[reg] = value; break; - case NPCM7XX_GCR_RLOCKR1: - case NPCM7XX_GCR_MDLR: - /* Write 1 to set */ - value |= s->regs[reg]; + case 8: + s->regs[reg] = value; + s->regs[reg + 1] = extract64(v, 32, 32); break; - }; - s->regs[reg] = value; + default: + g_assert_not_reached(); + } +} + +static bool npcm_gcr_check_mem_op(void *opaque, hwaddr offset, + unsigned size, bool is_write, + MemTxAttrs attrs) +{ + NPCMGCRClass *c = NPCM_GCR_GET_CLASS(opaque); + + if (offset >= c->nr_regs * sizeof(uint32_t)) { + return false; + } + + switch (size) { + case 4: + return true; + case 8: + if (offset >= NPCM8XX_GCR_SCRPAD_00 * sizeof(uint32_t) && + offset < (NPCM8XX_GCR_NR_REGS - 1) * sizeof(uint32_t)) { + return true; + } else { + return false; + } + default: + return false; + } } static const struct MemoryRegionOps npcm_gcr_ops = { @@ -XXX,XX +XXX,XX @@ static const struct MemoryRegionOps npcm_gcr_ops = { .endianness = DEVICE_LITTLE_ENDIAN, .valid = { .min_access_size = 4, - .max_access_size = 4, + .max_access_size = 8, + .accepts = npcm_gcr_check_mem_op, .unaligned = false, }, }; diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ npcm7xx_clk_read(uint64_t offset, uint32_t value) " offset: 0x%04" PRIx64 " valu npcm7xx_clk_write(uint64_t offset, uint32_t value) "offset: 0x%04" PRIx64 " value: 0x%08" PRIx32 # npcm_gcr.c -npcm_gcr_read(uint64_t offset, uint32_t value) " offset: 0x%04" PRIx64 " value: 0x%08" PRIx32 -npcm_gcr_write(uint64_t offset, uint32_t value) "offset: 0x%04" PRIx64 " value: 0x%08" PRIx32 +npcm_gcr_read(uint64_t offset, uint64_t value) " offset: 0x%04" PRIx64 " value: 0x%08" PRIx64 +npcm_gcr_write(uint64_t offset, uint64_t value) "offset: 0x%04" PRIx64 " value: 0x%08" PRIx64 # npcm7xx_mft.c npcm7xx_mft_read(const char *name, uint64_t offset, uint16_t value) "%s: offset: 0x%04" PRIx64 " value: 0x%04" PRIx16 -- 2.43.0 From: Hao Wu <wuhaotsh@google.com> NPCM7XX and NPCM8XX have a different set of CLK registers. This commit changes the name of the clk files to be used by both NPCM7XX and NPCM8XX CLK modules. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20250219184609.1839281-11-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/npcm7xx.h | 2 +- include/hw/misc/{npcm7xx_clk.h => npcm_clk.h} | 6 +++--- hw/misc/{npcm7xx_clk.c => npcm_clk.c} | 2 +- hw/misc/meson.build | 2 +- 4 files changed, 6 insertions(+), 6 deletions(-) rename include/hw/misc/{npcm7xx_clk.h => npcm_clk.h} (98%) rename hw/misc/{npcm7xx_clk.c => npcm_clk.c} (99%) diff --git a/include/hw/arm/npcm7xx.h b/include/hw/arm/npcm7xx.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/npcm7xx.h +++ b/include/hw/arm/npcm7xx.h @@ -XXX,XX +XXX,XX @@ #include "hw/gpio/npcm7xx_gpio.h" #include "hw/i2c/npcm7xx_smbus.h" #include "hw/mem/npcm7xx_mc.h" -#include "hw/misc/npcm7xx_clk.h" +#include "hw/misc/npcm_clk.h" #include "hw/misc/npcm_gcr.h" #include "hw/misc/npcm7xx_mft.h" #include "hw/misc/npcm7xx_pwm.h" diff --git a/include/hw/misc/npcm7xx_clk.h b/include/hw/misc/npcm_clk.h similarity index 98% rename from include/hw/misc/npcm7xx_clk.h rename to include/hw/misc/npcm_clk.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/npcm7xx_clk.h +++ b/include/hw/misc/npcm_clk.h @@ -XXX,XX +XXX,XX @@ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License * for more details. */ -#ifndef NPCM7XX_CLK_H -#define NPCM7XX_CLK_H +#ifndef NPCM_CLK_H +#define NPCM_CLK_H #include "exec/memory.h" #include "hw/clock.h" @@ -XXX,XX +XXX,XX @@ struct NPCM7xxCLKState { #define TYPE_NPCM7XX_CLK "npcm7xx-clk" OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxCLKState, NPCM7XX_CLK) -#endif /* NPCM7XX_CLK_H */ +#endif /* NPCM_CLK_H */ diff --git a/hw/misc/npcm7xx_clk.c b/hw/misc/npcm_clk.c similarity index 99% rename from hw/misc/npcm7xx_clk.c rename to hw/misc/npcm_clk.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/npcm7xx_clk.c +++ b/hw/misc/npcm_clk.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" -#include "hw/misc/npcm7xx_clk.h" +#include "hw/misc/npcm_clk.h" #include "hw/timer/npcm7xx_timer.h" #include "hw/qdev-clock.h" #include "migration/vmstate.h" diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ system_ss.add(when: 'CONFIG_IMX', if_true: files( 'imx_rngc.c', )) system_ss.add(when: 'CONFIG_NPCM7XX', if_true: files( - 'npcm7xx_clk.c', + 'npcm_clk.c', 'npcm_gcr.c', 'npcm7xx_mft.c', 'npcm7xx_pwm.c', -- 2.43.0 From: Hao Wu <wuhaotsh@google.com> A lot of NPCM7XX and NPCM8XX CLK modules share the same code, this commit moves the NPCM7XX CLK to NPCM CLK for these properties. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20250219184609.1839281-12-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/npcm7xx.h | 2 +- include/hw/misc/npcm_clk.h | 24 +++++---- hw/misc/npcm_clk.c | 106 +++++++++++++++++++++---------------- hw/misc/trace-events | 6 +-- 4 files changed, 77 insertions(+), 61 deletions(-) diff --git a/include/hw/arm/npcm7xx.h b/include/hw/arm/npcm7xx.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/npcm7xx.h +++ b/include/hw/arm/npcm7xx.h @@ -XXX,XX +XXX,XX @@ struct NPCM7xxState { MemoryRegion *dram; NPCMGCRState gcr; - NPCM7xxCLKState clk; + NPCMCLKState clk; NPCM7xxTimerCtrlState tim[3]; NPCM7xxADCState adc; NPCM7xxPWMState pwm[NPCM7XX_NR_PWM_MODULES]; diff --git a/include/hw/misc/npcm_clk.h b/include/hw/misc/npcm_clk.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/npcm_clk.h +++ b/include/hw/misc/npcm_clk.h @@ -XXX,XX +XXX,XX @@ #include "hw/clock.h" #include "hw/sysbus.h" -/* - * Number of registers in our device state structure. Don't change this without - * incrementing the version_id in the vmstate. - */ #define NPCM7XX_CLK_NR_REGS (0x70 / sizeof(uint32_t)) +/* + * Number of maximum registers in NPCM device state structure. Don't change + * this without incrementing the version_id in the vmstate. + */ +#define NPCM_CLK_MAX_NR_REGS NPCM7XX_CLK_NR_REGS #define NPCM7XX_WATCHDOG_RESET_GPIO_IN "npcm7xx-clk-watchdog-reset-gpio-in" @@ -XXX,XX +XXX,XX @@ typedef enum NPCM7xxClockDivider { NPCM7XX_CLOCK_NR_DIVIDERS, } NPCM7xxClockConverter; -typedef struct NPCM7xxCLKState NPCM7xxCLKState; +typedef struct NPCMCLKState NPCMCLKState; /** * struct NPCM7xxClockPLLState - A PLL module in CLK module. @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxClockPLLState { DeviceState parent; const char *name; - NPCM7xxCLKState *clk; + NPCMCLKState *clk; Clock *clock_in; Clock *clock_out; @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxClockSELState { DeviceState parent; const char *name; - NPCM7xxCLKState *clk; + NPCMCLKState *clk; uint8_t input_size; Clock *clock_in[NPCM7XX_CLK_SEL_MAX_INPUT]; Clock *clock_out; @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxClockDividerState { DeviceState parent; const char *name; - NPCM7xxCLKState *clk; + NPCMCLKState *clk; Clock *clock_in; Clock *clock_out; @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxClockDividerState { }; } NPCM7xxClockDividerState; -struct NPCM7xxCLKState { +struct NPCMCLKState { SysBusDevice parent; MemoryRegion iomem; @@ -XXX,XX +XXX,XX @@ struct NPCM7xxCLKState { NPCM7xxClockSELState sels[NPCM7XX_CLOCK_NR_SELS]; NPCM7xxClockDividerState dividers[NPCM7XX_CLOCK_NR_DIVIDERS]; - uint32_t regs[NPCM7XX_CLK_NR_REGS]; + uint32_t regs[NPCM_CLK_MAX_NR_REGS]; /* Time reference for SECCNT and CNTR25M, initialized by power on reset */ int64_t ref_ns; @@ -XXX,XX +XXX,XX @@ struct NPCM7xxCLKState { Clock *clkref; }; +#define TYPE_NPCM_CLK "npcm-clk" +OBJECT_DECLARE_SIMPLE_TYPE(NPCMCLKState, NPCM_CLK) #define TYPE_NPCM7XX_CLK "npcm7xx-clk" -OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxCLKState, NPCM7XX_CLK) #endif /* NPCM_CLK_H */ diff --git a/hw/misc/npcm_clk.c b/hw/misc/npcm_clk.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/npcm_clk.c +++ b/hw/misc/npcm_clk.c @@ -XXX,XX +XXX,XX @@ static NPCM7xxClockPLL find_pll_by_reg(enum NPCM7xxCLKRegisters reg) } } -static void npcm7xx_clk_update_all_plls(NPCM7xxCLKState *clk) +static void npcm7xx_clk_update_all_plls(NPCMCLKState *clk) { int i; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_update_all_plls(NPCM7xxCLKState *clk) } } -static void npcm7xx_clk_update_all_sels(NPCM7xxCLKState *clk) +static void npcm7xx_clk_update_all_sels(NPCMCLKState *clk) { int i; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_update_all_sels(NPCM7xxCLKState *clk) } } -static void npcm7xx_clk_update_all_dividers(NPCM7xxCLKState *clk) +static void npcm7xx_clk_update_all_dividers(NPCMCLKState *clk) { int i; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_update_all_dividers(NPCM7xxCLKState *clk) } } -static void npcm7xx_clk_update_all_clocks(NPCM7xxCLKState *clk) +static void npcm7xx_clk_update_all_clocks(NPCMCLKState *clk) { clock_update_hz(clk->clkref, NPCM7XX_CLOCK_REF_HZ); npcm7xx_clk_update_all_plls(clk); @@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_divider_init(Object *obj) } static void npcm7xx_init_clock_pll(NPCM7xxClockPLLState *pll, - NPCM7xxCLKState *clk, const PLLInitInfo *init_info) + NPCMCLKState *clk, const PLLInitInfo *init_info) { pll->name = init_info->name; pll->clk = clk; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_init_clock_pll(NPCM7xxClockPLLState *pll, } static void npcm7xx_init_clock_sel(NPCM7xxClockSELState *sel, - NPCM7xxCLKState *clk, const SELInitInfo *init_info) + NPCMCLKState *clk, const SELInitInfo *init_info) { int input_size = init_info->input_size; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_init_clock_sel(NPCM7xxClockSELState *sel, } static void npcm7xx_init_clock_divider(NPCM7xxClockDividerState *div, - NPCM7xxCLKState *clk, const DividerInitInfo *init_info) + NPCMCLKState *clk, const DividerInitInfo *init_info) { div->name = init_info->name; div->clk = clk; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_init_clock_divider(NPCM7xxClockDividerState *div, } } -static Clock *npcm7xx_get_clock(NPCM7xxCLKState *clk, ClockSrcType type, +static Clock *npcm7xx_get_clock(NPCMCLKState *clk, ClockSrcType type, int index) { switch (type) { @@ -XXX,XX +XXX,XX @@ static Clock *npcm7xx_get_clock(NPCM7xxCLKState *clk, ClockSrcType type, } } -static void npcm7xx_connect_clocks(NPCM7xxCLKState *clk) +static void npcm7xx_connect_clocks(NPCMCLKState *clk) { int i, j; Clock *src; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_connect_clocks(NPCM7xxCLKState *clk) } } -static uint64_t npcm7xx_clk_read(void *opaque, hwaddr offset, unsigned size) +static uint64_t npcm_clk_read(void *opaque, hwaddr offset, unsigned size) { uint32_t reg = offset / sizeof(uint32_t); - NPCM7xxCLKState *s = opaque; + NPCMCLKState *s = opaque; int64_t now_ns; uint32_t value = 0; @@ -XXX,XX +XXX,XX @@ static uint64_t npcm7xx_clk_read(void *opaque, hwaddr offset, unsigned size) break; }; - trace_npcm7xx_clk_read(offset, value); + trace_npcm_clk_read(offset, value); return value; } -static void npcm7xx_clk_write(void *opaque, hwaddr offset, +static void npcm_clk_write(void *opaque, hwaddr offset, uint64_t v, unsigned size) { uint32_t reg = offset / sizeof(uint32_t); - NPCM7xxCLKState *s = opaque; + NPCMCLKState *s = opaque; uint32_t value = v; - trace_npcm7xx_clk_write(offset, value); + trace_npcm_clk_write(offset, value); if (reg >= NPCM7XX_CLK_NR_REGS) { qemu_log_mask(LOG_GUEST_ERROR, @@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_write(void *opaque, hwaddr offset, static void npcm7xx_clk_perform_watchdog_reset(void *opaque, int n, int level) { - NPCM7xxCLKState *clk = NPCM7XX_CLK(opaque); + NPCMCLKState *clk = NPCM_CLK(opaque); uint32_t rcr; g_assert(n >= 0 && n <= NPCM7XX_NR_WATCHDOGS); @@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_perform_watchdog_reset(void *opaque, int n, } } -static const struct MemoryRegionOps npcm7xx_clk_ops = { - .read = npcm7xx_clk_read, - .write = npcm7xx_clk_write, +static const struct MemoryRegionOps npcm_clk_ops = { + .read = npcm_clk_read, + .write = npcm_clk_write, .endianness = DEVICE_LITTLE_ENDIAN, .valid = { .min_access_size = 4, @@ -XXX,XX +XXX,XX @@ static const struct MemoryRegionOps npcm7xx_clk_ops = { }, }; -static void npcm7xx_clk_enter_reset(Object *obj, ResetType type) +static void npcm_clk_enter_reset(Object *obj, ResetType type) { - NPCM7xxCLKState *s = NPCM7XX_CLK(obj); + NPCMCLKState *s = NPCM_CLK(obj); QEMU_BUILD_BUG_ON(sizeof(s->regs) != sizeof(cold_reset_values)); @@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_enter_reset(Object *obj, ResetType type) */ } -static void npcm7xx_clk_init_clock_hierarchy(NPCM7xxCLKState *s) +static void npcm7xx_clk_init_clock_hierarchy(NPCMCLKState *s) { int i; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_init_clock_hierarchy(NPCM7xxCLKState *s) clock_update_hz(s->clkref, NPCM7XX_CLOCK_REF_HZ); } -static void npcm7xx_clk_init(Object *obj) +static void npcm_clk_init(Object *obj) { - NPCM7xxCLKState *s = NPCM7XX_CLK(obj); + NPCMCLKState *s = NPCM_CLK(obj); - memory_region_init_io(&s->iomem, obj, &npcm7xx_clk_ops, s, - TYPE_NPCM7XX_CLK, 4 * KiB); + memory_region_init_io(&s->iomem, obj, &npcm_clk_ops, s, + TYPE_NPCM_CLK, 4 * KiB); sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->iomem); } -static int npcm7xx_clk_post_load(void *opaque, int version_id) +static int npcm_clk_post_load(void *opaque, int version_id) { if (version_id >= 1) { - NPCM7xxCLKState *clk = opaque; + NPCMCLKState *clk = opaque; npcm7xx_clk_update_all_clocks(clk); } @@ -XXX,XX +XXX,XX @@ static int npcm7xx_clk_post_load(void *opaque, int version_id) return 0; } -static void npcm7xx_clk_realize(DeviceState *dev, Error **errp) +static void npcm_clk_realize(DeviceState *dev, Error **errp) { int i; - NPCM7xxCLKState *s = NPCM7XX_CLK(dev); + NPCMCLKState *s = NPCM_CLK(dev); qdev_init_gpio_in_named(DEVICE(s), npcm7xx_clk_perform_watchdog_reset, NPCM7XX_WATCHDOG_RESET_GPIO_IN, NPCM7XX_NR_WATCHDOGS); @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_npcm7xx_clk_divider = { }, }; -static const VMStateDescription vmstate_npcm7xx_clk = { - .name = "npcm7xx-clk", - .version_id = 1, - .minimum_version_id = 1, - .post_load = npcm7xx_clk_post_load, +static const VMStateDescription vmstate_npcm_clk = { + .name = "npcm-clk", + .version_id = 2, + .minimum_version_id = 2, + .post_load = npcm_clk_post_load, .fields = (const VMStateField[]) { - VMSTATE_UINT32_ARRAY(regs, NPCM7xxCLKState, NPCM7XX_CLK_NR_REGS), - VMSTATE_INT64(ref_ns, NPCM7xxCLKState), - VMSTATE_CLOCK(clkref, NPCM7xxCLKState), + VMSTATE_UINT32_ARRAY(regs, NPCMCLKState, NPCM_CLK_MAX_NR_REGS), + VMSTATE_INT64(ref_ns, NPCMCLKState), + VMSTATE_CLOCK(clkref, NPCMCLKState), VMSTATE_END_OF_LIST(), }, }; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_divider_class_init(ObjectClass *klass, void *data) dc->vmsd = &vmstate_npcm7xx_clk_divider; } -static void npcm7xx_clk_class_init(ObjectClass *klass, void *data) +static void npcm_clk_class_init(ObjectClass *klass, void *data) { ResettableClass *rc = RESETTABLE_CLASS(klass); DeviceClass *dc = DEVICE_CLASS(klass); - QEMU_BUILD_BUG_ON(NPCM7XX_CLK_REGS_END > NPCM7XX_CLK_NR_REGS); + dc->vmsd = &vmstate_npcm_clk; + dc->realize = npcm_clk_realize; + rc->phases.enter = npcm_clk_enter_reset; +} +static void npcm7xx_clk_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + QEMU_BUILD_BUG_ON(NPCM7XX_CLK_REGS_END > NPCM_CLK_MAX_NR_REGS); + QEMU_BUILD_BUG_ON(NPCM7XX_CLK_REGS_END != NPCM7XX_CLK_NR_REGS); dc->desc = "NPCM7xx Clock Control Registers"; - dc->vmsd = &vmstate_npcm7xx_clk; - dc->realize = npcm7xx_clk_realize; - rc->phases.enter = npcm7xx_clk_enter_reset; } static const TypeInfo npcm7xx_clk_pll_info = { @@ -XXX,XX +XXX,XX @@ static const TypeInfo npcm7xx_clk_divider_info = { .class_init = npcm7xx_clk_divider_class_init, }; +static const TypeInfo npcm_clk_info = { + .name = TYPE_NPCM_CLK, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(NPCMCLKState), + .instance_init = npcm_clk_init, + .class_init = npcm_clk_class_init, + .abstract = true, +}; + static const TypeInfo npcm7xx_clk_info = { .name = TYPE_NPCM7XX_CLK, - .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(NPCM7xxCLKState), - .instance_init = npcm7xx_clk_init, + .parent = TYPE_NPCM_CLK, .class_init = npcm7xx_clk_class_init, }; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_register_type(void) type_register_static(&npcm7xx_clk_pll_info); type_register_static(&npcm7xx_clk_sel_info); type_register_static(&npcm7xx_clk_divider_info); + type_register_static(&npcm_clk_info); type_register_static(&npcm7xx_clk_info); } type_init(npcm7xx_clk_register_type); diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ mos6522_set_sr_int(void) "set sr_int" mos6522_write(uint64_t addr, const char *name, uint64_t val) "reg=0x%"PRIx64 " [%s] val=0x%"PRIx64 mos6522_read(uint64_t addr, const char *name, unsigned val) "reg=0x%"PRIx64 " [%s] val=0x%x" -# npcm7xx_clk.c -npcm7xx_clk_read(uint64_t offset, uint32_t value) " offset: 0x%04" PRIx64 " value: 0x%08" PRIx32 -npcm7xx_clk_write(uint64_t offset, uint32_t value) "offset: 0x%04" PRIx64 " value: 0x%08" PRIx32 +# npcm_clk.c +npcm_clk_read(uint64_t offset, uint32_t value) " offset: 0x%04" PRIx64 " value: 0x%08" PRIx32 +npcm_clk_write(uint64_t offset, uint32_t value) "offset: 0x%04" PRIx64 " value: 0x%08" PRIx32 # npcm_gcr.c npcm_gcr_read(uint64_t offset, uint64_t value) " offset: 0x%04" PRIx64 " value: 0x%08" PRIx64 -- 2.43.0 From: Hao Wu <wuhaotsh@google.com> These 2 values are different between NPCM7XX and NPCM8XX CLKs. So we add them to the class and assign different values to them. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20250219184609.1839281-13-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/npcm_clk.h | 9 ++++++++- hw/misc/npcm_clk.c | 18 ++++++++++++------ hw/misc/npcm_gcr.c | 2 ++ 3 files changed, 22 insertions(+), 7 deletions(-) diff --git a/include/hw/misc/npcm_clk.h b/include/hw/misc/npcm_clk.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/npcm_clk.h +++ b/include/hw/misc/npcm_clk.h @@ -XXX,XX +XXX,XX @@ struct NPCMCLKState { Clock *clkref; }; +typedef struct NPCMCLKClass { + SysBusDeviceClass parent; + + size_t nr_regs; + const uint32_t *cold_reset_values; +} NPCMCLKClass; + #define TYPE_NPCM_CLK "npcm-clk" -OBJECT_DECLARE_SIMPLE_TYPE(NPCMCLKState, NPCM_CLK) +OBJECT_DECLARE_TYPE(NPCMCLKState, NPCMCLKClass, NPCM_CLK) #define TYPE_NPCM7XX_CLK "npcm7xx-clk" #endif /* NPCM_CLK_H */ diff --git a/hw/misc/npcm_clk.c b/hw/misc/npcm_clk.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/npcm_clk.c +++ b/hw/misc/npcm_clk.c @@ -XXX,XX +XXX,XX @@ enum NPCM7xxCLKRegisters { * All are loaded on power-up reset. CLKENx and SWRSTR should also be loaded on * core domain reset, but this reset type is not yet supported by QEMU. */ -static const uint32_t cold_reset_values[NPCM7XX_CLK_NR_REGS] = { +static const uint32_t npcm7xx_cold_reset_values[NPCM7XX_CLK_NR_REGS] = { [NPCM7XX_CLK_CLKEN1] = 0xffffffff, [NPCM7XX_CLK_CLKSEL] = 0x004aaaaa, [NPCM7XX_CLK_CLKDIV1] = 0x5413f855, @@ -XXX,XX +XXX,XX @@ static uint64_t npcm_clk_read(void *opaque, hwaddr offset, unsigned size) { uint32_t reg = offset / sizeof(uint32_t); NPCMCLKState *s = opaque; + NPCMCLKClass *c = NPCM_CLK_GET_CLASS(s); int64_t now_ns; uint32_t value = 0; - if (reg >= NPCM7XX_CLK_NR_REGS) { + if (reg >= c->nr_regs) { qemu_log_mask(LOG_GUEST_ERROR, "%s: offset 0x%04" HWADDR_PRIx " out of range\n", __func__, offset); @@ -XXX,XX +XXX,XX @@ static void npcm_clk_write(void *opaque, hwaddr offset, { uint32_t reg = offset / sizeof(uint32_t); NPCMCLKState *s = opaque; + NPCMCLKClass *c = NPCM_CLK_GET_CLASS(s); uint32_t value = v; trace_npcm_clk_write(offset, value); - if (reg >= NPCM7XX_CLK_NR_REGS) { + if (reg >= c->nr_regs) { qemu_log_mask(LOG_GUEST_ERROR, "%s: offset 0x%04" HWADDR_PRIx " out of range\n", __func__, offset); @@ -XXX,XX +XXX,XX @@ static const struct MemoryRegionOps npcm_clk_ops = { static void npcm_clk_enter_reset(Object *obj, ResetType type) { NPCMCLKState *s = NPCM_CLK(obj); + NPCMCLKClass *c = NPCM_CLK_GET_CLASS(s); - QEMU_BUILD_BUG_ON(sizeof(s->regs) != sizeof(cold_reset_values)); - - memcpy(s->regs, cold_reset_values, sizeof(cold_reset_values)); + g_assert(sizeof(s->regs) >= c->nr_regs * sizeof(uint32_t)); + memcpy(s->regs, c->cold_reset_values, sizeof(s->regs)); s->ref_ns = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); npcm7xx_clk_update_all_clocks(s); /* @@ -XXX,XX +XXX,XX @@ static void npcm_clk_class_init(ObjectClass *klass, void *data) static void npcm7xx_clk_class_init(ObjectClass *klass, void *data) { + NPCMCLKClass *c = NPCM_CLK_CLASS(klass); DeviceClass *dc = DEVICE_CLASS(klass); QEMU_BUILD_BUG_ON(NPCM7XX_CLK_REGS_END > NPCM_CLK_MAX_NR_REGS); QEMU_BUILD_BUG_ON(NPCM7XX_CLK_REGS_END != NPCM7XX_CLK_NR_REGS); dc->desc = "NPCM7xx Clock Control Registers"; + c->nr_regs = NPCM7XX_CLK_NR_REGS; + c->cold_reset_values = npcm7xx_cold_reset_values; } static const TypeInfo npcm7xx_clk_pll_info = { @@ -XXX,XX +XXX,XX @@ static const TypeInfo npcm_clk_info = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(NPCMCLKState), .instance_init = npcm_clk_init, + .class_size = sizeof(NPCMCLKClass), .class_init = npcm_clk_class_init, .abstract = true, }; diff --git a/hw/misc/npcm_gcr.c b/hw/misc/npcm_gcr.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/npcm_gcr.c +++ b/hw/misc/npcm_gcr.c @@ -XXX,XX +XXX,XX @@ static uint64_t npcm_gcr_read(void *opaque, hwaddr offset, unsigned size) break; case 8: + g_assert(!(reg & 1)); value = deposit64(s->regs[reg], 32, 32, s->regs[reg + 1]); break; @@ -XXX,XX +XXX,XX @@ static void npcm_gcr_write(void *opaque, hwaddr offset, break; case 8: + g_assert(!(reg & 1)); s->regs[reg] = value; s->regs[reg + 1] = extract64(v, 32, 32); break; -- 2.43.0 From: Hao Wu <wuhaotsh@google.com> NPCM8XX adds a few new registers and have a different set of reset values to the CLK modules. This patch supports them. This patch doesn't support the new clock values generated by these registers. Currently no modules use these new clock values so they are not necessary at this point. Implementation of these clocks might be required when implementing these modules. Reviewed-by: Titus Rwantare <titusr@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20250219184609.1839281-14-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/npcm_clk.h | 10 +++- hw/misc/npcm_clk.c | 117 +++++++++++++++++++++++++++++++++++-- 2 files changed, 119 insertions(+), 8 deletions(-) diff --git a/include/hw/misc/npcm_clk.h b/include/hw/misc/npcm_clk.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/npcm_clk.h +++ b/include/hw/misc/npcm_clk.h @@ -XXX,XX +XXX,XX @@ /* - * Nuvoton NPCM7xx Clock Control Registers. + * Nuvoton NPCM7xx/8xx Clock Control Registers. * * Copyright 2020 Google LLC * @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #define NPCM7XX_CLK_NR_REGS (0x70 / sizeof(uint32_t)) +#define NPCM8XX_CLK_NR_REGS (0xc4 / sizeof(uint32_t)) /* * Number of maximum registers in NPCM device state structure. Don't change * this without incrementing the version_id in the vmstate. */ -#define NPCM_CLK_MAX_NR_REGS NPCM7XX_CLK_NR_REGS +#define NPCM_CLK_MAX_NR_REGS NPCM8XX_CLK_NR_REGS #define NPCM7XX_WATCHDOG_RESET_GPIO_IN "npcm7xx-clk-watchdog-reset-gpio-in" @@ -XXX,XX +XXX,XX @@ struct NPCMCLKState { MemoryRegion iomem; /* Clock converters */ + /* + * TODO: Implement unique clock converters for NPCM8xx. + * NPCM8xx adds a few more clock outputs. + */ NPCM7xxClockPLLState plls[NPCM7XX_CLOCK_NR_PLLS]; NPCM7xxClockSELState sels[NPCM7XX_CLOCK_NR_SELS]; NPCM7xxClockDividerState dividers[NPCM7XX_CLOCK_NR_DIVIDERS]; @@ -XXX,XX +XXX,XX @@ typedef struct NPCMCLKClass { #define TYPE_NPCM_CLK "npcm-clk" OBJECT_DECLARE_TYPE(NPCMCLKState, NPCMCLKClass, NPCM_CLK) #define TYPE_NPCM7XX_CLK "npcm7xx-clk" +#define TYPE_NPCM8XX_CLK "npcm8xx-clk" #endif /* NPCM_CLK_H */ diff --git a/hw/misc/npcm_clk.c b/hw/misc/npcm_clk.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/npcm_clk.c +++ b/hw/misc/npcm_clk.c @@ -XXX,XX +XXX,XX @@ /* - * Nuvoton NPCM7xx Clock Control Registers. + * Nuvoton NPCM7xx/8xx Clock Control Registers. * * Copyright 2020 Google LLC * @@ -XXX,XX +XXX,XX @@ enum NPCM7xxCLKRegisters { NPCM7XX_CLK_AHBCKFI, NPCM7XX_CLK_SECCNT, NPCM7XX_CLK_CNTR25M, - NPCM7XX_CLK_REGS_END, +}; + +enum NPCM8xxCLKRegisters { + NPCM8XX_CLK_CLKEN1, + NPCM8XX_CLK_CLKSEL, + NPCM8XX_CLK_CLKDIV1, + NPCM8XX_CLK_PLLCON0, + NPCM8XX_CLK_PLLCON1, + NPCM8XX_CLK_SWRSTR, + NPCM8XX_CLK_IPSRST1 = 0x20 / sizeof(uint32_t), + NPCM8XX_CLK_IPSRST2, + NPCM8XX_CLK_CLKEN2, + NPCM8XX_CLK_CLKDIV2, + NPCM8XX_CLK_CLKEN3, + NPCM8XX_CLK_IPSRST3, + NPCM8XX_CLK_WD0RCR, + NPCM8XX_CLK_WD1RCR, + NPCM8XX_CLK_WD2RCR, + NPCM8XX_CLK_SWRSTC1, + NPCM8XX_CLK_SWRSTC2, + NPCM8XX_CLK_SWRSTC3, + NPCM8XX_CLK_TIPRSTC, + NPCM8XX_CLK_PLLCON2, + NPCM8XX_CLK_CLKDIV3, + NPCM8XX_CLK_CORSTC, + NPCM8XX_CLK_PLLCONG, + NPCM8XX_CLK_AHBCKFI, + NPCM8XX_CLK_SECCNT, + NPCM8XX_CLK_CNTR25M, + /* Registers unique to NPCM8XX SoC */ + NPCM8XX_CLK_CLKEN4, + NPCM8XX_CLK_IPSRST4, + NPCM8XX_CLK_BUSTO, + NPCM8XX_CLK_CLKDIV4, + NPCM8XX_CLK_WD0RCRB, + NPCM8XX_CLK_WD1RCRB, + NPCM8XX_CLK_WD2RCRB, + NPCM8XX_CLK_SWRSTC1B, + NPCM8XX_CLK_SWRSTC2B, + NPCM8XX_CLK_SWRSTC3B, + NPCM8XX_CLK_TIPRSTCB, + NPCM8XX_CLK_CORSTCB, + NPCM8XX_CLK_IPSRSTDIS1, + NPCM8XX_CLK_IPSRSTDIS2, + NPCM8XX_CLK_IPSRSTDIS3, + NPCM8XX_CLK_IPSRSTDIS4, + NPCM8XX_CLK_CLKENDIS1, + NPCM8XX_CLK_CLKENDIS2, + NPCM8XX_CLK_CLKENDIS3, + NPCM8XX_CLK_CLKENDIS4, + NPCM8XX_CLK_THRTL_CNT, }; /* @@ -XXX,XX +XXX,XX @@ static const uint32_t npcm7xx_cold_reset_values[NPCM7XX_CLK_NR_REGS] = { [NPCM7XX_CLK_AHBCKFI] = 0x000000c8, }; +/* + * These reset values were taken from version 0.92 of the NPCM8xx data sheet. + */ +static const uint32_t npcm8xx_cold_reset_values[NPCM8XX_CLK_NR_REGS] = { + [NPCM8XX_CLK_CLKEN1] = 0xffffffff, + [NPCM8XX_CLK_CLKSEL] = 0x154aaaaa, + [NPCM8XX_CLK_CLKDIV1] = 0x5413f855, + [NPCM8XX_CLK_PLLCON0] = 0x00222101 | PLLCON_LOKI, + [NPCM8XX_CLK_PLLCON1] = 0x00202101 | PLLCON_LOKI, + [NPCM8XX_CLK_IPSRST1] = 0x00001000, + [NPCM8XX_CLK_IPSRST2] = 0x80000000, + [NPCM8XX_CLK_CLKEN2] = 0xffffffff, + [NPCM8XX_CLK_CLKDIV2] = 0xaa4f8f9f, + [NPCM8XX_CLK_CLKEN3] = 0xffffffff, + [NPCM8XX_CLK_IPSRST3] = 0x03000000, + [NPCM8XX_CLK_WD0RCR] = 0xffffffff, + [NPCM8XX_CLK_WD1RCR] = 0xffffffff, + [NPCM8XX_CLK_WD2RCR] = 0xffffffff, + [NPCM8XX_CLK_SWRSTC1] = 0x00000003, + [NPCM8XX_CLK_SWRSTC2] = 0x00000001, + [NPCM8XX_CLK_SWRSTC3] = 0x00000001, + [NPCM8XX_CLK_TIPRSTC] = 0x00000001, + [NPCM8XX_CLK_PLLCON2] = 0x00c02105 | PLLCON_LOKI, + [NPCM8XX_CLK_CLKDIV3] = 0x00009100, + [NPCM8XX_CLK_CORSTC] = 0x04000003, + [NPCM8XX_CLK_PLLCONG] = 0x01228606 | PLLCON_LOKI, + [NPCM8XX_CLK_AHBCKFI] = 0x000000c8, + [NPCM8XX_CLK_CLKEN4] = 0xffffffff, + [NPCM8XX_CLK_CLKDIV4] = 0x70009000, + [NPCM8XX_CLK_IPSRST4] = 0x02000000, + [NPCM8XX_CLK_WD0RCRB] = 0xfffffe71, + [NPCM8XX_CLK_WD1RCRB] = 0xfffffe71, + [NPCM8XX_CLK_WD2RCRB] = 0xfffffe71, + [NPCM8XX_CLK_SWRSTC1B] = 0xfffffe71, + [NPCM8XX_CLK_SWRSTC2B] = 0xfffffe71, + [NPCM8XX_CLK_SWRSTC3B] = 0xfffffe71, + [NPCM8XX_CLK_TIPRSTCB] = 0xfffffe71, + [NPCM8XX_CLK_CORSTCB] = 0xfffffe71, +}; + /* The number of watchdogs that can trigger a reset. */ #define NPCM7XX_NR_WATCHDOGS (3) @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_npcm7xx_clk_divider = { static const VMStateDescription vmstate_npcm_clk = { .name = "npcm-clk", - .version_id = 2, - .minimum_version_id = 2, + .version_id = 3, + .minimum_version_id = 3, .post_load = npcm_clk_post_load, .fields = (const VMStateField[]) { VMSTATE_UINT32_ARRAY(regs, NPCMCLKState, NPCM_CLK_MAX_NR_REGS), @@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_class_init(ObjectClass *klass, void *data) NPCMCLKClass *c = NPCM_CLK_CLASS(klass); DeviceClass *dc = DEVICE_CLASS(klass); - QEMU_BUILD_BUG_ON(NPCM7XX_CLK_REGS_END > NPCM_CLK_MAX_NR_REGS); - QEMU_BUILD_BUG_ON(NPCM7XX_CLK_REGS_END != NPCM7XX_CLK_NR_REGS); dc->desc = "NPCM7xx Clock Control Registers"; c->nr_regs = NPCM7XX_CLK_NR_REGS; c->cold_reset_values = npcm7xx_cold_reset_values; } +static void npcm8xx_clk_class_init(ObjectClass *klass, void *data) +{ + NPCMCLKClass *c = NPCM_CLK_CLASS(klass); + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->desc = "NPCM8xx Clock Control Registers"; + c->nr_regs = NPCM8XX_CLK_NR_REGS; + c->cold_reset_values = npcm8xx_cold_reset_values; +} + static const TypeInfo npcm7xx_clk_pll_info = { .name = TYPE_NPCM7XX_CLOCK_PLL, .parent = TYPE_DEVICE, @@ -XXX,XX +XXX,XX @@ static const TypeInfo npcm7xx_clk_info = { .class_init = npcm7xx_clk_class_init, }; +static const TypeInfo npcm8xx_clk_info = { + .name = TYPE_NPCM8XX_CLK, + .parent = TYPE_NPCM_CLK, + .class_init = npcm8xx_clk_class_init, +}; + static void npcm7xx_clk_register_type(void) { type_register_static(&npcm7xx_clk_pll_info); @@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_register_type(void) type_register_static(&npcm7xx_clk_divider_info); type_register_static(&npcm_clk_info); type_register_static(&npcm7xx_clk_info); + type_register_static(&npcm8xx_clk_info); } type_init(npcm7xx_clk_register_type); -- 2.43.0 From: Hao Wu <wuhaotsh@google.com> The PCS exists in NPCM8XX's GMAC1 and is used to control the SGMII PHY. This implementation contains all the default registers and the soft reset feature that are required to load the Linux kernel driver. Further features have not been implemented yet. Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20250219184609.1839281-15-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/net/npcm_pcs.h | 42 ++++ hw/net/npcm_pcs.c | 410 ++++++++++++++++++++++++++++++++++++++ hw/net/meson.build | 1 + hw/net/trace-events | 4 +- 4 files changed, 455 insertions(+), 2 deletions(-) create mode 100644 include/hw/net/npcm_pcs.h create mode 100644 hw/net/npcm_pcs.c diff --git a/include/hw/net/npcm_pcs.h b/include/hw/net/npcm_pcs.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/net/npcm_pcs.h @@ -XXX,XX +XXX,XX @@ +/* + * Nuvoton NPCM8xx PCS Module + * + * Copyright 2022 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#ifndef NPCM_PCS_H +#define NPCM_PCS_H + +#include "hw/sysbus.h" + +#define NPCM_PCS_NR_SR_CTLS (0x12 / sizeof(uint16_t)) +#define NPCM_PCS_NR_SR_MIIS (0x20 / sizeof(uint16_t)) +#define NPCM_PCS_NR_SR_TIMS (0x22 / sizeof(uint16_t)) +#define NPCM_PCS_NR_VR_MIIS (0x1c6 / sizeof(uint16_t)) + +struct NPCMPCSState { + SysBusDevice parent; + + MemoryRegion iomem; + + uint16_t indirect_access_base; + uint16_t sr_ctl[NPCM_PCS_NR_SR_CTLS]; + uint16_t sr_mii[NPCM_PCS_NR_SR_MIIS]; + uint16_t sr_tim[NPCM_PCS_NR_SR_TIMS]; + uint16_t vr_mii[NPCM_PCS_NR_VR_MIIS]; +}; + +#define TYPE_NPCM_PCS "npcm-pcs" +OBJECT_DECLARE_SIMPLE_TYPE(NPCMPCSState, NPCM_PCS) + +#endif /* NPCM_PCS_H */ diff --git a/hw/net/npcm_pcs.c b/hw/net/npcm_pcs.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/net/npcm_pcs.c @@ -XXX,XX +XXX,XX @@ +/* + * Nuvoton NPCM8xx PCS Module + * + * Copyright 2022 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +/* + * Disclaimer: + * Currently we only implemented the default values of the registers and + * the soft reset feature. These are required to boot up the GMAC module + * in Linux kernel for NPCM845 boards. Other functionalities are not modeled. + */ + +#include "qemu/osdep.h" + +#include "exec/hwaddr.h" +#include "hw/registerfields.h" +#include "hw/net/npcm_pcs.h" +#include "migration/vmstate.h" +#include "qemu/log.h" +#include "qemu/units.h" +#include "trace.h" + +#define NPCM_PCS_IND_AC_BA 0x1fe +#define NPCM_PCS_IND_SR_CTL 0x1e00 +#define NPCM_PCS_IND_SR_MII 0x1f00 +#define NPCM_PCS_IND_SR_TIM 0x1f07 +#define NPCM_PCS_IND_VR_MII 0x1f80 + +REG16(NPCM_PCS_SR_CTL_ID1, 0x08) +REG16(NPCM_PCS_SR_CTL_ID2, 0x0a) +REG16(NPCM_PCS_SR_CTL_STS, 0x10) + +REG16(NPCM_PCS_SR_MII_CTRL, 0x00) +REG16(NPCM_PCS_SR_MII_STS, 0x02) +REG16(NPCM_PCS_SR_MII_DEV_ID1, 0x04) +REG16(NPCM_PCS_SR_MII_DEV_ID2, 0x06) +REG16(NPCM_PCS_SR_MII_AN_ADV, 0x08) +REG16(NPCM_PCS_SR_MII_LP_BABL, 0x0a) +REG16(NPCM_PCS_SR_MII_AN_EXPN, 0x0c) +REG16(NPCM_PCS_SR_MII_EXT_STS, 0x1e) + +REG16(NPCM_PCS_SR_TIM_SYNC_ABL, 0x10) +REG16(NPCM_PCS_SR_TIM_SYNC_TX_MAX_DLY_LWR, 0x12) +REG16(NPCM_PCS_SR_TIM_SYNC_TX_MAX_DLY_UPR, 0x14) +REG16(NPCM_PCS_SR_TIM_SYNC_TX_MIN_DLY_LWR, 0x16) +REG16(NPCM_PCS_SR_TIM_SYNC_TX_MIN_DLY_UPR, 0x18) +REG16(NPCM_PCS_SR_TIM_SYNC_RX_MAX_DLY_LWR, 0x1a) +REG16(NPCM_PCS_SR_TIM_SYNC_RX_MAX_DLY_UPR, 0x1c) +REG16(NPCM_PCS_SR_TIM_SYNC_RX_MIN_DLY_LWR, 0x1e) +REG16(NPCM_PCS_SR_TIM_SYNC_RX_MIN_DLY_UPR, 0x20) + +REG16(NPCM_PCS_VR_MII_MMD_DIG_CTRL1, 0x000) +REG16(NPCM_PCS_VR_MII_AN_CTRL, 0x002) +REG16(NPCM_PCS_VR_MII_AN_INTR_STS, 0x004) +REG16(NPCM_PCS_VR_MII_TC, 0x006) +REG16(NPCM_PCS_VR_MII_DBG_CTRL, 0x00a) +REG16(NPCM_PCS_VR_MII_EEE_MCTRL0, 0x00c) +REG16(NPCM_PCS_VR_MII_EEE_TXTIMER, 0x010) +REG16(NPCM_PCS_VR_MII_EEE_RXTIMER, 0x012) +REG16(NPCM_PCS_VR_MII_LINK_TIMER_CTRL, 0x014) +REG16(NPCM_PCS_VR_MII_EEE_MCTRL1, 0x016) +REG16(NPCM_PCS_VR_MII_DIG_STS, 0x020) +REG16(NPCM_PCS_VR_MII_ICG_ERRCNT1, 0x022) +REG16(NPCM_PCS_VR_MII_MISC_STS, 0x030) +REG16(NPCM_PCS_VR_MII_RX_LSTS, 0x040) +REG16(NPCM_PCS_VR_MII_MP_TX_BSTCTRL0, 0x070) +REG16(NPCM_PCS_VR_MII_MP_TX_LVLCTRL0, 0x074) +REG16(NPCM_PCS_VR_MII_MP_TX_GENCTRL0, 0x07a) +REG16(NPCM_PCS_VR_MII_MP_TX_GENCTRL1, 0x07c) +REG16(NPCM_PCS_VR_MII_MP_TX_STS, 0x090) +REG16(NPCM_PCS_VR_MII_MP_RX_GENCTRL0, 0x0b0) +REG16(NPCM_PCS_VR_MII_MP_RX_GENCTRL1, 0x0b2) +REG16(NPCM_PCS_VR_MII_MP_RX_LOS_CTRL0, 0x0ba) +REG16(NPCM_PCS_VR_MII_MP_MPLL_CTRL0, 0x0f0) +REG16(NPCM_PCS_VR_MII_MP_MPLL_CTRL1, 0x0f2) +REG16(NPCM_PCS_VR_MII_MP_MPLL_STS, 0x110) +REG16(NPCM_PCS_VR_MII_MP_MISC_CTRL2, 0x126) +REG16(NPCM_PCS_VR_MII_MP_LVL_CTRL, 0x130) +REG16(NPCM_PCS_VR_MII_MP_MISC_CTRL0, 0x132) +REG16(NPCM_PCS_VR_MII_MP_MISC_CTRL1, 0x134) +REG16(NPCM_PCS_VR_MII_DIG_CTRL2, 0x1c2) +REG16(NPCM_PCS_VR_MII_DIG_ERRCNT_SEL, 0x1c4) + +/* Register Fields */ +#define NPCM_PCS_SR_MII_CTRL_RST BIT(15) + +static const uint16_t npcm_pcs_sr_ctl_cold_reset_values[NPCM_PCS_NR_SR_CTLS] = { + [R_NPCM_PCS_SR_CTL_ID1] = 0x699e, + [R_NPCM_PCS_SR_CTL_STS] = 0x8000, +}; + +static const uint16_t npcm_pcs_sr_mii_cold_reset_values[NPCM_PCS_NR_SR_MIIS] = { + [R_NPCM_PCS_SR_MII_CTRL] = 0x1140, + [R_NPCM_PCS_SR_MII_STS] = 0x0109, + [R_NPCM_PCS_SR_MII_DEV_ID1] = 0x699e, + [R_NPCM_PCS_SR_MII_DEV_ID2] = 0xced0, + [R_NPCM_PCS_SR_MII_AN_ADV] = 0x0020, + [R_NPCM_PCS_SR_MII_EXT_STS] = 0xc000, +}; + +static const uint16_t npcm_pcs_sr_tim_cold_reset_values[NPCM_PCS_NR_SR_TIMS] = { + [R_NPCM_PCS_SR_TIM_SYNC_ABL] = 0x0003, + [R_NPCM_PCS_SR_TIM_SYNC_TX_MAX_DLY_LWR] = 0x0038, + [R_NPCM_PCS_SR_TIM_SYNC_TX_MIN_DLY_LWR] = 0x0038, + [R_NPCM_PCS_SR_TIM_SYNC_RX_MAX_DLY_LWR] = 0x0058, + [R_NPCM_PCS_SR_TIM_SYNC_RX_MIN_DLY_LWR] = 0x0048, +}; + +static const uint16_t npcm_pcs_vr_mii_cold_reset_values[NPCM_PCS_NR_VR_MIIS] = { + [R_NPCM_PCS_VR_MII_MMD_DIG_CTRL1] = 0x2400, + [R_NPCM_PCS_VR_MII_AN_INTR_STS] = 0x000a, + [R_NPCM_PCS_VR_MII_EEE_MCTRL0] = 0x899c, + [R_NPCM_PCS_VR_MII_DIG_STS] = 0x0010, + [R_NPCM_PCS_VR_MII_MP_TX_BSTCTRL0] = 0x000a, + [R_NPCM_PCS_VR_MII_MP_TX_LVLCTRL0] = 0x007f, + [R_NPCM_PCS_VR_MII_MP_TX_GENCTRL0] = 0x0001, + [R_NPCM_PCS_VR_MII_MP_RX_GENCTRL0] = 0x0100, + [R_NPCM_PCS_VR_MII_MP_RX_GENCTRL1] = 0x1100, + [R_NPCM_PCS_VR_MII_MP_RX_LOS_CTRL0] = 0x000e, + [R_NPCM_PCS_VR_MII_MP_MPLL_CTRL0] = 0x0100, + [R_NPCM_PCS_VR_MII_MP_MPLL_CTRL1] = 0x0032, + [R_NPCM_PCS_VR_MII_MP_MPLL_STS] = 0x0001, + [R_NPCM_PCS_VR_MII_MP_LVL_CTRL] = 0x0019, +}; + +static void npcm_pcs_soft_reset(NPCMPCSState *s) +{ + memcpy(s->sr_ctl, npcm_pcs_sr_ctl_cold_reset_values, + NPCM_PCS_NR_SR_CTLS * sizeof(uint16_t)); + memcpy(s->sr_mii, npcm_pcs_sr_mii_cold_reset_values, + NPCM_PCS_NR_SR_MIIS * sizeof(uint16_t)); + memcpy(s->sr_tim, npcm_pcs_sr_tim_cold_reset_values, + NPCM_PCS_NR_SR_TIMS * sizeof(uint16_t)); + memcpy(s->vr_mii, npcm_pcs_vr_mii_cold_reset_values, + NPCM_PCS_NR_VR_MIIS * sizeof(uint16_t)); +} + +static uint16_t npcm_pcs_read_sr_ctl(NPCMPCSState *s, hwaddr offset) +{ + hwaddr regno = offset / sizeof(uint16_t); + + if (regno >= NPCM_PCS_NR_SR_CTLS) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: SR_CTL read offset 0x%04" HWADDR_PRIx + " is out of range.\n", + DEVICE(s)->canonical_path, offset); + return 0; + } + + return s->sr_ctl[regno]; +} + +static uint16_t npcm_pcs_read_sr_mii(NPCMPCSState *s, hwaddr offset) +{ + hwaddr regno = offset / sizeof(uint16_t); + + if (regno >= NPCM_PCS_NR_SR_MIIS) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: SR_MII read offset 0x%04" HWADDR_PRIx + " is out of range.\n", + DEVICE(s)->canonical_path, offset); + return 0; + } + + return s->sr_mii[regno]; +} + +static uint16_t npcm_pcs_read_sr_tim(NPCMPCSState *s, hwaddr offset) +{ + hwaddr regno = offset / sizeof(uint16_t); + + if (regno >= NPCM_PCS_NR_SR_TIMS) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: SR_TIM read offset 0x%04" HWADDR_PRIx + " is out of range.\n", + DEVICE(s)->canonical_path, offset); + return 0; + } + + return s->sr_tim[regno]; +} + +static uint16_t npcm_pcs_read_vr_mii(NPCMPCSState *s, hwaddr offset) +{ + hwaddr regno = offset / sizeof(uint16_t); + + if (regno >= NPCM_PCS_NR_VR_MIIS) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: VR_MII read offset 0x%04" HWADDR_PRIx + " is out of range.\n", + DEVICE(s)->canonical_path, offset); + return 0; + } + + return s->vr_mii[regno]; +} + +static void npcm_pcs_write_sr_ctl(NPCMPCSState *s, hwaddr offset, uint16_t v) +{ + hwaddr regno = offset / sizeof(uint16_t); + + if (regno >= NPCM_PCS_NR_SR_CTLS) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: SR_CTL write offset 0x%04" HWADDR_PRIx + " is out of range.\n", + DEVICE(s)->canonical_path, offset); + return; + } + + s->sr_ctl[regno] = v; +} + +static void npcm_pcs_write_sr_mii(NPCMPCSState *s, hwaddr offset, uint16_t v) +{ + hwaddr regno = offset / sizeof(uint16_t); + + if (regno >= NPCM_PCS_NR_SR_MIIS) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: SR_MII write offset 0x%04" HWADDR_PRIx + " is out of range.\n", + DEVICE(s)->canonical_path, offset); + return; + } + + s->sr_mii[regno] = v; + + if ((offset == A_NPCM_PCS_SR_MII_CTRL) && (v & NPCM_PCS_SR_MII_CTRL_RST)) { + /* Trigger a soft reset */ + npcm_pcs_soft_reset(s); + } +} + +static void npcm_pcs_write_sr_tim(NPCMPCSState *s, hwaddr offset, uint16_t v) +{ + hwaddr regno = offset / sizeof(uint16_t); + + if (regno >= NPCM_PCS_NR_SR_TIMS) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: SR_TIM write offset 0x%04" HWADDR_PRIx + " is out of range.\n", + DEVICE(s)->canonical_path, offset); + return; + } + + s->sr_tim[regno] = v; +} + +static void npcm_pcs_write_vr_mii(NPCMPCSState *s, hwaddr offset, uint16_t v) +{ + hwaddr regno = offset / sizeof(uint16_t); + + if (regno >= NPCM_PCS_NR_VR_MIIS) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: VR_MII write offset 0x%04" HWADDR_PRIx + " is out of range.\n", + DEVICE(s)->canonical_path, offset); + return; + } + + s->vr_mii[regno] = v; +} + +static uint64_t npcm_pcs_read(void *opaque, hwaddr offset, unsigned size) +{ + NPCMPCSState *s = opaque; + uint16_t v = 0; + + if (offset == NPCM_PCS_IND_AC_BA) { + v = s->indirect_access_base; + } else { + switch (s->indirect_access_base) { + case NPCM_PCS_IND_SR_CTL: + v = npcm_pcs_read_sr_ctl(s, offset); + break; + + case NPCM_PCS_IND_SR_MII: + v = npcm_pcs_read_sr_mii(s, offset); + break; + + case NPCM_PCS_IND_SR_TIM: + v = npcm_pcs_read_sr_tim(s, offset); + break; + + case NPCM_PCS_IND_VR_MII: + v = npcm_pcs_read_vr_mii(s, offset); + break; + + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Read with invalid indirect address base: 0x%" + PRIx16 "\n", DEVICE(s)->canonical_path, + s->indirect_access_base); + } + } + + trace_npcm_pcs_reg_read(DEVICE(s)->canonical_path, s->indirect_access_base, + offset, v); + return v; +} + +static void npcm_pcs_write(void *opaque, hwaddr offset, + uint64_t v, unsigned size) +{ + NPCMPCSState *s = opaque; + + trace_npcm_pcs_reg_write(DEVICE(s)->canonical_path, s->indirect_access_base, + offset, v); + if (offset == NPCM_PCS_IND_AC_BA) { + s->indirect_access_base = v; + } else { + switch (s->indirect_access_base) { + case NPCM_PCS_IND_SR_CTL: + npcm_pcs_write_sr_ctl(s, offset, v); + break; + + case NPCM_PCS_IND_SR_MII: + npcm_pcs_write_sr_mii(s, offset, v); + break; + + case NPCM_PCS_IND_SR_TIM: + npcm_pcs_write_sr_tim(s, offset, v); + break; + + case NPCM_PCS_IND_VR_MII: + npcm_pcs_write_vr_mii(s, offset, v); + break; + + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Write with invalid indirect address base: 0x%02" + PRIx16 "\n", DEVICE(s)->canonical_path, + s->indirect_access_base); + } + } +} + +static void npcm_pcs_enter_reset(Object *obj, ResetType type) +{ + NPCMPCSState *s = NPCM_PCS(obj); + + npcm_pcs_soft_reset(s); +} + +static const struct MemoryRegionOps npcm_pcs_ops = { + .read = npcm_pcs_read, + .write = npcm_pcs_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid = { + .min_access_size = 2, + .max_access_size = 2, + .unaligned = false, + }, +}; + +static void npcm_pcs_realize(DeviceState *dev, Error **errp) +{ + NPCMPCSState *pcs = NPCM_PCS(dev); + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); + + memory_region_init_io(&pcs->iomem, OBJECT(pcs), &npcm_pcs_ops, pcs, + TYPE_NPCM_PCS, 8 * KiB); + sysbus_init_mmio(sbd, &pcs->iomem); +} + +static const VMStateDescription vmstate_npcm_pcs = { + .name = TYPE_NPCM_PCS, + .version_id = 0, + .minimum_version_id = 0, + .fields = (VMStateField[]) { + VMSTATE_UINT16(indirect_access_base, NPCMPCSState), + VMSTATE_UINT16_ARRAY(sr_ctl, NPCMPCSState, NPCM_PCS_NR_SR_CTLS), + VMSTATE_UINT16_ARRAY(sr_mii, NPCMPCSState, NPCM_PCS_NR_SR_MIIS), + VMSTATE_UINT16_ARRAY(sr_tim, NPCMPCSState, NPCM_PCS_NR_SR_TIMS), + VMSTATE_UINT16_ARRAY(vr_mii, NPCMPCSState, NPCM_PCS_NR_VR_MIIS), + VMSTATE_END_OF_LIST(), + }, +}; + +static void npcm_pcs_class_init(ObjectClass *klass, void *data) +{ + ResettableClass *rc = RESETTABLE_CLASS(klass); + DeviceClass *dc = DEVICE_CLASS(klass); + + set_bit(DEVICE_CATEGORY_MISC, dc->categories); + dc->desc = "NPCM PCS Controller"; + dc->realize = npcm_pcs_realize; + dc->vmsd = &vmstate_npcm_pcs; + rc->phases.enter = npcm_pcs_enter_reset; +} + +static const TypeInfo npcm_pcs_types[] = { + { + .name = TYPE_NPCM_PCS, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(NPCMPCSState), + .class_init = npcm_pcs_class_init, + }, +}; +DEFINE_TYPES(npcm_pcs_types) diff --git a/hw/net/meson.build b/hw/net/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/net/meson.build +++ b/hw/net/meson.build @@ -XXX,XX +XXX,XX @@ system_ss.add(when: 'CONFIG_SUNHME', if_true: files('sunhme.c')) system_ss.add(when: 'CONFIG_FTGMAC100', if_true: files('ftgmac100.c')) system_ss.add(when: 'CONFIG_SUNGEM', if_true: files('sungem.c')) system_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx_emc.c', 'npcm_gmac.c')) +system_ss.add(when: 'CONFIG_NPCM8XX', if_true: files('npcm_pcs.c')) system_ss.add(when: 'CONFIG_COLDFIRE', if_true: files('mcf_fec.c')) specific_ss.add(when: 'CONFIG_PSERIES', if_true: files('spapr_llan.c')) diff --git a/hw/net/trace-events b/hw/net/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/net/trace-events +++ b/hw/net/trace-events @@ -XXX,XX +XXX,XX @@ npcm_gmac_packet_tx_desc_data(const char* name, uint32_t tdes0, uint32_t tdes1) npcm_gmac_tx_desc_owner(const char* name, uint32_t desc_addr) "%s: TX Descriptor @0x%04" PRIX32 " is owned by software" # npcm_pcs.c -npcm_pcs_reg_read(const char *name, uint16_t indirect_access_baes, uint64_t offset, uint16_t value) "%s: IND: 0x%02" PRIx16 " offset: 0x%04" PRIx64 " value: 0x%04" PRIx16 -npcm_pcs_reg_write(const char *name, uint16_t indirect_access_baes, uint64_t offset, uint16_t value) "%s: IND: 0x%02" PRIx16 " offset: 0x%04" PRIx64 " value: 0x%04" PRIx16 +npcm_pcs_reg_read(const char *name, uint16_t indirect_access_base, uint64_t offset, uint16_t value) "%s: IND: 0x%02" PRIx16 " offset: 0x%04" PRIx64 " value: 0x%04" PRIx16 +npcm_pcs_reg_write(const char *name, uint16_t indirect_access_base, uint64_t offset, uint16_t value) "%s: IND: 0x%02" PRIx16 " offset: 0x%04" PRIx64 " value: 0x%04" PRIx16 # dp8398x.c dp8393x_raise_irq(int isr) "raise irq, isr is 0x%04x" -- 2.43.0 From: Hao Wu <wuhaotsh@google.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20250219184609.1839281-16-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configs/devices/aarch64-softmmu/default.mak | 1 + include/hw/arm/npcm8xx.h | 106 +++ hw/arm/npcm8xx.c | 805 ++++++++++++++++++++ hw/arm/Kconfig | 13 + hw/arm/meson.build | 1 + 5 files changed, 926 insertions(+) create mode 100644 include/hw/arm/npcm8xx.h create mode 100644 hw/arm/npcm8xx.c diff --git a/configs/devices/aarch64-softmmu/default.mak b/configs/devices/aarch64-softmmu/default.mak index XXXXXXX..XXXXXXX 100644 --- a/configs/devices/aarch64-softmmu/default.mak +++ b/configs/devices/aarch64-softmmu/default.mak @@ -XXX,XX +XXX,XX @@ include ../arm-softmmu/default.mak # CONFIG_XLNX_ZYNQMP_ARM=n # CONFIG_XLNX_VERSAL=n # CONFIG_SBSA_REF=n +# CONFIG_NPCM8XX=n diff --git a/include/hw/arm/npcm8xx.h b/include/hw/arm/npcm8xx.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/arm/npcm8xx.h @@ -XXX,XX +XXX,XX @@ +/* + * Nuvoton NPCM8xx SoC family. + * + * Copyright 2022 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ +#ifndef NPCM8XX_H +#define NPCM8XX_H + +#include "hw/adc/npcm7xx_adc.h" +#include "hw/core/split-irq.h" +#include "hw/cpu/cluster.h" +#include "hw/gpio/npcm7xx_gpio.h" +#include "hw/i2c/npcm7xx_smbus.h" +#include "hw/intc/arm_gic_common.h" +#include "hw/mem/npcm7xx_mc.h" +#include "hw/misc/npcm_clk.h" +#include "hw/misc/npcm_gcr.h" +#include "hw/misc/npcm7xx_mft.h" +#include "hw/misc/npcm7xx_pwm.h" +#include "hw/misc/npcm7xx_rng.h" +#include "hw/net/npcm7xx_emc.h" +#include "hw/nvram/npcm7xx_otp.h" +#include "hw/sd/npcm7xx_sdhci.h" +#include "hw/timer/npcm7xx_timer.h" +#include "hw/ssi/npcm7xx_fiu.h" +#include "hw/usb/hcd-ehci.h" +#include "hw/usb/hcd-ohci.h" +#include "target/arm/cpu.h" + +#define NPCM8XX_MAX_NUM_CPUS (4) + +/* The first half of the address space is reserved for DDR4 DRAM. */ +#define NPCM8XX_DRAM_BA (0x00000000) +#define NPCM8XX_DRAM_SZ (2 * GiB) + +/* Magic addresses for setting up direct kernel booting and SMP boot stubs. */ +#define NPCM8XX_LOADER_START (0x00000000) /* Start of SDRAM */ +#define NPCM8XX_SMP_LOADER_START (0xffff0000) /* Boot ROM */ +#define NPCM8XX_SMP_BOOTREG_ADDR (0xf080013c) /* GCR.SCRPAD */ +#define NPCM8XX_BOARD_SETUP_ADDR (0xffff1000) /* Boot ROM */ + +#define NPCM8XX_NR_PWM_MODULES 3 + +struct NPCM8xxState { + DeviceState parent_obj; + + ARMCPU cpu[NPCM8XX_MAX_NUM_CPUS]; + CPUClusterState cpu_cluster; + GICState gic; + + MemoryRegion sram; + MemoryRegion irom; + MemoryRegion ram3; + MemoryRegion *dram; + + NPCMGCRState gcr; + NPCMCLKState clk; + NPCM7xxTimerCtrlState tim[3]; + NPCM7xxADCState adc; + NPCM7xxPWMState pwm[NPCM8XX_NR_PWM_MODULES]; + NPCM7xxMFTState mft[8]; + NPCM7xxOTPState fuse_array; + NPCM7xxMCState mc; + NPCM7xxRNGState rng; + NPCM7xxGPIOState gpio[8]; + NPCM7xxSMBusState smbus[27]; + EHCISysBusState ehci[2]; + OHCISysBusState ohci[2]; + NPCM7xxFIUState fiu[3]; + NPCM7xxSDHCIState mmc; +}; + +struct NPCM8xxClass { + DeviceClass parent_class; + + /* Bitmask of modules that are permanently disabled on this chip. */ + uint32_t disabled_modules; + /* Number of CPU cores enabled in this SoC class. */ + uint32_t num_cpus; +}; + +#define TYPE_NPCM8XX "npcm8xx" +OBJECT_DECLARE_TYPE(NPCM8xxState, NPCM8xxClass, NPCM8XX) + +/** + * npcm8xx_load_kernel - Loads memory with everything needed to boot + * @machine - The machine containing the SoC to be booted. + * @soc - The SoC containing the CPU to be booted. + * + * This will set up the ARM boot info structure for the specific NPCM8xx + * derivative and call arm_load_kernel() to set up loading of the kernel, etc. + * into memory, if requested by the user. + */ +void npcm8xx_load_kernel(MachineState *machine, NPCM8xxState *soc); + +#endif /* NPCM8XX_H */ diff --git a/hw/arm/npcm8xx.c b/hw/arm/npcm8xx.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/npcm8xx.c @@ -XXX,XX +XXX,XX @@ +/* + * Nuvoton NPCM8xx SoC family. + * + * Copyright 2022 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" + +#include "hw/boards.h" +#include "hw/arm/boot.h" +#include "hw/arm/bsa.h" +#include "hw/arm/npcm8xx.h" +#include "hw/char/serial-mm.h" +#include "hw/intc/arm_gic.h" +#include "hw/loader.h" +#include "hw/misc/unimp.h" +#include "hw/qdev-clock.h" +#include "hw/qdev-properties.h" +#include "qapi/error.h" +#include "qemu/units.h" +#include "system/system.h" + +/* + * This covers the whole MMIO space. We'll use this to catch any MMIO accesses + * that aren't handled by a device. + */ +#define NPCM8XX_MMIO_BA 0x80000000 +#define NPCM8XX_MMIO_SZ 0x7ffd0000 + +/* OTP fuse array */ +#define NPCM8XX_OTP_BA 0xf0189000 + +/* GIC Distributor */ +#define NPCM8XX_GICD_BA 0xdfff9000 +#define NPCM8XX_GICC_BA 0xdfffa000 + +/* Core system modules. */ +#define NPCM8XX_CPUP_BA 0xf03fe000 +#define NPCM8XX_GCR_BA 0xf0800000 +#define NPCM8XX_CLK_BA 0xf0801000 +#define NPCM8XX_MC_BA 0xf0824000 +#define NPCM8XX_RNG_BA 0xf000b000 + +/* ADC Module */ +#define NPCM8XX_ADC_BA 0xf000c000 + +/* Internal AHB SRAM */ +#define NPCM8XX_RAM3_BA 0xc0008000 +#define NPCM8XX_RAM3_SZ (4 * KiB) + +/* Memory blocks at the end of the address space */ +#define NPCM8XX_RAM2_BA 0xfffb0000 +#define NPCM8XX_RAM2_SZ (256 * KiB) +#define NPCM8XX_ROM_BA 0xffff0100 +#define NPCM8XX_ROM_SZ (64 * KiB) + +/* SDHCI Modules */ +#define NPCM8XX_MMC_BA 0xf0842000 + +/* Run PLL1 at 1600 MHz */ +#define NPCM8XX_PLLCON1_FIXUP_VAL 0x00402101 +/* Run the CPU from PLL1 and UART from PLL2 */ +#define NPCM8XX_CLKSEL_FIXUP_VAL 0x004aaba9 + +/* Clock configuration values to be fixed up when bypassing bootloader */ + +/* + * Interrupt lines going into the GIC. This does not include internal Cortex-A35 + * interrupts. + */ +enum NPCM8xxInterrupt { + NPCM8XX_ADC_IRQ = 0, + NPCM8XX_PECI_IRQ = 6, + NPCM8XX_KCS_HIB_IRQ = 9, + NPCM8XX_MMC_IRQ = 26, + NPCM8XX_TIMER0_IRQ = 32, /* Timer Module 0 */ + NPCM8XX_TIMER1_IRQ, + NPCM8XX_TIMER2_IRQ, + NPCM8XX_TIMER3_IRQ, + NPCM8XX_TIMER4_IRQ, + NPCM8XX_TIMER5_IRQ, /* Timer Module 1 */ + NPCM8XX_TIMER6_IRQ, + NPCM8XX_TIMER7_IRQ, + NPCM8XX_TIMER8_IRQ, + NPCM8XX_TIMER9_IRQ, + NPCM8XX_TIMER10_IRQ, /* Timer Module 2 */ + NPCM8XX_TIMER11_IRQ, + NPCM8XX_TIMER12_IRQ, + NPCM8XX_TIMER13_IRQ, + NPCM8XX_TIMER14_IRQ, + NPCM8XX_WDG0_IRQ = 47, /* Timer Module 0 Watchdog */ + NPCM8XX_WDG1_IRQ, /* Timer Module 1 Watchdog */ + NPCM8XX_WDG2_IRQ, /* Timer Module 2 Watchdog */ + NPCM8XX_EHCI1_IRQ = 61, + NPCM8XX_OHCI1_IRQ, + NPCM8XX_EHCI2_IRQ, + NPCM8XX_OHCI2_IRQ, + NPCM8XX_PWM0_IRQ = 93, /* PWM module 0 */ + NPCM8XX_PWM1_IRQ, /* PWM module 1 */ + NPCM8XX_MFT0_IRQ = 96, /* MFT module 0 */ + NPCM8XX_MFT1_IRQ, /* MFT module 1 */ + NPCM8XX_MFT2_IRQ, /* MFT module 2 */ + NPCM8XX_MFT3_IRQ, /* MFT module 3 */ + NPCM8XX_MFT4_IRQ, /* MFT module 4 */ + NPCM8XX_MFT5_IRQ, /* MFT module 5 */ + NPCM8XX_MFT6_IRQ, /* MFT module 6 */ + NPCM8XX_MFT7_IRQ, /* MFT module 7 */ + NPCM8XX_PCI_MBOX1_IRQ = 105, + NPCM8XX_PCI_MBOX2_IRQ, + NPCM8XX_GPIO0_IRQ = 116, + NPCM8XX_GPIO1_IRQ, + NPCM8XX_GPIO2_IRQ, + NPCM8XX_GPIO3_IRQ, + NPCM8XX_GPIO4_IRQ, + NPCM8XX_GPIO5_IRQ, + NPCM8XX_GPIO6_IRQ, + NPCM8XX_GPIO7_IRQ, + NPCM8XX_SMBUS0_IRQ = 128, + NPCM8XX_SMBUS1_IRQ, + NPCM8XX_SMBUS2_IRQ, + NPCM8XX_SMBUS3_IRQ, + NPCM8XX_SMBUS4_IRQ, + NPCM8XX_SMBUS5_IRQ, + NPCM8XX_SMBUS6_IRQ, + NPCM8XX_SMBUS7_IRQ, + NPCM8XX_SMBUS8_IRQ, + NPCM8XX_SMBUS9_IRQ, + NPCM8XX_SMBUS10_IRQ, + NPCM8XX_SMBUS11_IRQ, + NPCM8XX_SMBUS12_IRQ, + NPCM8XX_SMBUS13_IRQ, + NPCM8XX_SMBUS14_IRQ, + NPCM8XX_SMBUS15_IRQ, + NPCM8XX_SMBUS16_IRQ, + NPCM8XX_SMBUS17_IRQ, + NPCM8XX_SMBUS18_IRQ, + NPCM8XX_SMBUS19_IRQ, + NPCM8XX_SMBUS20_IRQ, + NPCM8XX_SMBUS21_IRQ, + NPCM8XX_SMBUS22_IRQ, + NPCM8XX_SMBUS23_IRQ, + NPCM8XX_SMBUS24_IRQ, + NPCM8XX_SMBUS25_IRQ, + NPCM8XX_SMBUS26_IRQ, + NPCM8XX_UART0_IRQ = 192, + NPCM8XX_UART1_IRQ, + NPCM8XX_UART2_IRQ, + NPCM8XX_UART3_IRQ, + NPCM8XX_UART4_IRQ, + NPCM8XX_UART5_IRQ, + NPCM8XX_UART6_IRQ, +}; + +/* Total number of GIC interrupts, including internal Cortex-A35 interrupts. */ +#define NPCM8XX_NUM_IRQ (288) +#define NPCM8XX_PPI_BASE(cpu) \ + ((NPCM8XX_NUM_IRQ - GIC_INTERNAL) + (cpu) * GIC_INTERNAL) + +/* Register base address for each Timer Module */ +static const hwaddr npcm8xx_tim_addr[] = { + 0xf0008000, + 0xf0009000, + 0xf000a000, +}; + +/* Register base address for each 16550 UART */ +static const hwaddr npcm8xx_uart_addr[] = { + 0xf0000000, + 0xf0001000, + 0xf0002000, + 0xf0003000, + 0xf0004000, + 0xf0005000, + 0xf0006000, +}; + +/* Direct memory-mapped access to SPI0 CS0-1. */ +static const hwaddr npcm8xx_fiu0_flash_addr[] = { + 0x80000000, /* CS0 */ + 0x88000000, /* CS1 */ +}; + +/* Direct memory-mapped access to SPI1 CS0-3. */ +static const hwaddr npcm8xx_fiu1_flash_addr[] = { + 0x90000000, /* CS0 */ + 0x91000000, /* CS1 */ + 0x92000000, /* CS2 */ + 0x93000000, /* CS3 */ +}; + +/* Direct memory-mapped access to SPI3 CS0-3. */ +static const hwaddr npcm8xx_fiu3_flash_addr[] = { + 0xa0000000, /* CS0 */ + 0xa8000000, /* CS1 */ + 0xb0000000, /* CS2 */ + 0xb8000000, /* CS3 */ +}; + +/* Register base address for each PWM Module */ +static const hwaddr npcm8xx_pwm_addr[] = { + 0xf0103000, + 0xf0104000, + 0xf0105000, +}; + +/* Register base address for each MFT Module */ +static const hwaddr npcm8xx_mft_addr[] = { + 0xf0180000, + 0xf0181000, + 0xf0182000, + 0xf0183000, + 0xf0184000, + 0xf0185000, + 0xf0186000, + 0xf0187000, +}; + +/* Direct memory-mapped access to each SMBus Module. */ +static const hwaddr npcm8xx_smbus_addr[] = { + 0xf0080000, + 0xf0081000, + 0xf0082000, + 0xf0083000, + 0xf0084000, + 0xf0085000, + 0xf0086000, + 0xf0087000, + 0xf0088000, + 0xf0089000, + 0xf008a000, + 0xf008b000, + 0xf008c000, + 0xf008d000, + 0xf008e000, + 0xf008f000, + 0xfff00000, + 0xfff01000, + 0xfff02000, + 0xfff03000, + 0xfff04000, + 0xfff05000, + 0xfff06000, + 0xfff07000, + 0xfff08000, + 0xfff09000, + 0xfff0a000, +}; + +/* Register base address for each USB host EHCI registers */ +static const hwaddr npcm8xx_ehci_addr[] = { + 0xf0828100, + 0xf082a100, +}; + +/* Register base address for each USB host OHCI registers */ +static const hwaddr npcm8xx_ohci_addr[] = { + 0xf0829000, + 0xf082b000, +}; + +static const struct { + hwaddr regs_addr; + uint32_t reset_pu; + uint32_t reset_pd; + uint32_t reset_osrc; + uint32_t reset_odsc; +} npcm8xx_gpio[] = { + { + .regs_addr = 0xf0010000, + .reset_pu = 0x00000300, + .reset_pd = 0x000f0000, + }, { + .regs_addr = 0xf0011000, + .reset_pu = 0xe0fefe01, + .reset_pd = 0x07000000, + }, { + .regs_addr = 0xf0012000, + .reset_pu = 0xc00fffff, + .reset_pd = 0x3ff00000, + }, { + .regs_addr = 0xf0013000, + .reset_pd = 0x00003000, + }, { + .regs_addr = 0xf0014000, + .reset_pu = 0xffff0000, + }, { + .regs_addr = 0xf0015000, + .reset_pu = 0xff8387fe, + .reset_pd = 0x007c0001, + .reset_osrc = 0x08000000, + }, { + .regs_addr = 0xf0016000, + .reset_pu = 0x00000801, + .reset_pd = 0x00000302, + }, { + .regs_addr = 0xf0017000, + .reset_pu = 0x000002ff, + .reset_pd = 0x00000c00, + }, +}; + +static const struct { + const char *name; + hwaddr regs_addr; + int cs_count; + const hwaddr *flash_addr; + size_t flash_size; +} npcm8xx_fiu[] = { + { + .name = "fiu0", + .regs_addr = 0xfb000000, + .cs_count = ARRAY_SIZE(npcm8xx_fiu0_flash_addr), + .flash_addr = npcm8xx_fiu0_flash_addr, + .flash_size = 128 * MiB, + }, + { + .name = "fiu1", + .regs_addr = 0xfb002000, + .cs_count = ARRAY_SIZE(npcm8xx_fiu1_flash_addr), + .flash_addr = npcm8xx_fiu1_flash_addr, + .flash_size = 16 * MiB, + }, { + .name = "fiu3", + .regs_addr = 0xc0000000, + .cs_count = ARRAY_SIZE(npcm8xx_fiu3_flash_addr), + .flash_addr = npcm8xx_fiu3_flash_addr, + .flash_size = 128 * MiB, + }, +}; + +static struct arm_boot_info npcm8xx_binfo = { + .loader_start = NPCM8XX_LOADER_START, + .smp_loader_start = NPCM8XX_SMP_LOADER_START, + .smp_bootreg_addr = NPCM8XX_SMP_BOOTREG_ADDR, + .gic_cpu_if_addr = NPCM8XX_GICC_BA, + .secure_boot = false, + .board_id = -1, + .board_setup_addr = NPCM8XX_BOARD_SETUP_ADDR, +}; + +void npcm8xx_load_kernel(MachineState *machine, NPCM8xxState *soc) +{ + npcm8xx_binfo.ram_size = machine->ram_size; + + arm_load_kernel(&soc->cpu[0], machine, &npcm8xx_binfo); +} + +static void npcm8xx_init_fuses(NPCM8xxState *s) +{ + NPCM8xxClass *nc = NPCM8XX_GET_CLASS(s); + uint32_t value; + + /* + * The initial mask of disabled modules indicates the chip derivative (e.g. + * NPCM750 or NPCM730). + */ + value = cpu_to_le32(nc->disabled_modules); + npcm7xx_otp_array_write(&s->fuse_array, &value, NPCM7XX_FUSE_DERIVATIVE, + sizeof(value)); +} + +static void npcm8xx_write_adc_calibration(NPCM8xxState *s) +{ + /* Both ADC and the fuse array must have realized. */ + QEMU_BUILD_BUG_ON(sizeof(s->adc.calibration_r_values) != 4); + npcm7xx_otp_array_write(&s->fuse_array, s->adc.calibration_r_values, + NPCM7XX_FUSE_ADC_CALIB, sizeof(s->adc.calibration_r_values)); +} + +static qemu_irq npcm8xx_irq(NPCM8xxState *s, int n) +{ + return qdev_get_gpio_in(DEVICE(&s->gic), n); +} + +static void npcm8xx_init(Object *obj) +{ + NPCM8xxState *s = NPCM8XX(obj); + int i; + + object_initialize_child(obj, "cpu-cluster", &s->cpu_cluster, + TYPE_CPU_CLUSTER); + for (i = 0; i < NPCM8XX_MAX_NUM_CPUS; i++) { + object_initialize_child(OBJECT(&s->cpu_cluster), "cpu[*]", &s->cpu[i], + ARM_CPU_TYPE_NAME("cortex-a35")); + } + object_initialize_child(obj, "gic", &s->gic, TYPE_ARM_GIC); + object_initialize_child(obj, "gcr", &s->gcr, TYPE_NPCM8XX_GCR); + object_property_add_alias(obj, "power-on-straps", OBJECT(&s->gcr), + "power-on-straps"); + object_initialize_child(obj, "clk", &s->clk, TYPE_NPCM8XX_CLK); + object_initialize_child(obj, "otp", &s->fuse_array, + TYPE_NPCM7XX_FUSE_ARRAY); + object_initialize_child(obj, "mc", &s->mc, TYPE_NPCM7XX_MC); + object_initialize_child(obj, "rng", &s->rng, TYPE_NPCM7XX_RNG); + object_initialize_child(obj, "adc", &s->adc, TYPE_NPCM7XX_ADC); + + for (i = 0; i < ARRAY_SIZE(s->tim); i++) { + object_initialize_child(obj, "tim[*]", &s->tim[i], TYPE_NPCM7XX_TIMER); + } + + for (i = 0; i < ARRAY_SIZE(s->gpio); i++) { + object_initialize_child(obj, "gpio[*]", &s->gpio[i], TYPE_NPCM7XX_GPIO); + } + + + for (i = 0; i < ARRAY_SIZE(s->smbus); i++) { + object_initialize_child(obj, "smbus[*]", &s->smbus[i], + TYPE_NPCM7XX_SMBUS); + DEVICE(&s->smbus[i])->id = g_strdup_printf("smbus[%d]", i); + } + + for (i = 0; i < ARRAY_SIZE(s->ehci); i++) { + object_initialize_child(obj, "ehci[*]", &s->ehci[i], TYPE_NPCM7XX_EHCI); + } + for (i = 0; i < ARRAY_SIZE(s->ohci); i++) { + object_initialize_child(obj, "ohci[*]", &s->ohci[i], TYPE_SYSBUS_OHCI); + } + + QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm8xx_fiu) != ARRAY_SIZE(s->fiu)); + for (i = 0; i < ARRAY_SIZE(s->fiu); i++) { + object_initialize_child(obj, npcm8xx_fiu[i].name, &s->fiu[i], + TYPE_NPCM7XX_FIU); + } + + for (i = 0; i < ARRAY_SIZE(s->pwm); i++) { + object_initialize_child(obj, "pwm[*]", &s->pwm[i], TYPE_NPCM7XX_PWM); + } + + for (i = 0; i < ARRAY_SIZE(s->mft); i++) { + object_initialize_child(obj, "mft[*]", &s->mft[i], TYPE_NPCM7XX_MFT); + } + + object_initialize_child(obj, "mmc", &s->mmc, TYPE_NPCM7XX_SDHCI); +} + +static void npcm8xx_realize(DeviceState *dev, Error **errp) +{ + NPCM8xxState *s = NPCM8XX(dev); + NPCM8xxClass *nc = NPCM8XX_GET_CLASS(s); + int i; + + if (memory_region_size(s->dram) > NPCM8XX_DRAM_SZ) { + error_setg(errp, "%s: NPCM8xx cannot address more than %" PRIu64 + " MiB of DRAM", __func__, NPCM8XX_DRAM_SZ / MiB); + return; + } + + /* CPUs */ + for (i = 0; i < nc->num_cpus; i++) { + object_property_set_int(OBJECT(&s->cpu[i]), "mp-affinity", + arm_build_mp_affinity(i, NPCM8XX_MAX_NUM_CPUS), + &error_abort); + object_property_set_bool(OBJECT(&s->cpu[i]), "reset-hivecs", true, + &error_abort); + object_property_set_int(OBJECT(&s->cpu[i]), "core-count", + nc->num_cpus, &error_abort); + + /* Disable security extensions. */ + object_property_set_bool(OBJECT(&s->cpu[i]), "has_el3", false, + &error_abort); + + if (!qdev_realize(DEVICE(&s->cpu[i]), NULL, errp)) { + return; + } + } + + /* ARM GIC for Cortex A35. Can only fail if we pass bad parameters here. */ + object_property_set_uint(OBJECT(&s->gic), "num-cpu", nc->num_cpus, errp); + object_property_set_uint(OBJECT(&s->gic), "num-irq", NPCM8XX_NUM_IRQ, errp); + object_property_set_uint(OBJECT(&s->gic), "revision", 2, errp); + object_property_set_bool(OBJECT(&s->gic), "has-security-extensions", true, + errp); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->gic), errp)) { + return; + } + for (i = 0; i < nc->num_cpus; i++) { + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), i, + qdev_get_gpio_in(DEVICE(&s->cpu[i]), ARM_CPU_IRQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), i + nc->num_cpus, + qdev_get_gpio_in(DEVICE(&s->cpu[i]), ARM_CPU_FIQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), i + nc->num_cpus * 2, + qdev_get_gpio_in(DEVICE(&s->cpu[i]), ARM_CPU_VIRQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), i + nc->num_cpus * 3, + qdev_get_gpio_in(DEVICE(&s->cpu[i]), ARM_CPU_VFIQ)); + + qdev_connect_gpio_out(DEVICE(&s->cpu[i]), GTIMER_PHYS, + qdev_get_gpio_in(DEVICE(&s->gic), + NPCM8XX_PPI_BASE(i) + ARCH_TIMER_NS_EL1_IRQ)); + qdev_connect_gpio_out(DEVICE(&s->cpu[i]), GTIMER_VIRT, + qdev_get_gpio_in(DEVICE(&s->gic), + NPCM8XX_PPI_BASE(i) + ARCH_TIMER_VIRT_IRQ)); + qdev_connect_gpio_out(DEVICE(&s->cpu[i]), GTIMER_HYP, + qdev_get_gpio_in(DEVICE(&s->gic), + NPCM8XX_PPI_BASE(i) + ARCH_TIMER_NS_EL2_IRQ)); + qdev_connect_gpio_out(DEVICE(&s->cpu[i]), GTIMER_SEC, + qdev_get_gpio_in(DEVICE(&s->gic), + NPCM8XX_PPI_BASE(i) + ARCH_TIMER_S_EL1_IRQ)); + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gic), 0, NPCM8XX_GICD_BA); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gic), 1, NPCM8XX_GICC_BA); + + /* CPU cluster */ + qdev_prop_set_uint32(DEVICE(&s->cpu_cluster), "cluster-id", 0); + qdev_realize(DEVICE(&s->cpu_cluster), NULL, &error_fatal); + + /* System Global Control Registers (GCR). Can fail due to user input. */ + object_property_set_int(OBJECT(&s->gcr), "disabled-modules", + nc->disabled_modules, &error_abort); + object_property_add_const_link(OBJECT(&s->gcr), "dram-mr", OBJECT(s->dram)); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->gcr), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gcr), 0, NPCM8XX_GCR_BA); + + /* Clock Control Registers (CLK). Cannot fail. */ + sysbus_realize(SYS_BUS_DEVICE(&s->clk), &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->clk), 0, NPCM8XX_CLK_BA); + + /* OTP fuse strap array. Cannot fail. */ + sysbus_realize(SYS_BUS_DEVICE(&s->fuse_array), &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->fuse_array), 0, NPCM8XX_OTP_BA); + npcm8xx_init_fuses(s); + + /* Fake Memory Controller (MC). Cannot fail. */ + sysbus_realize(SYS_BUS_DEVICE(&s->mc), &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->mc), 0, NPCM8XX_MC_BA); + + /* ADC Modules. Cannot fail. */ + qdev_connect_clock_in(DEVICE(&s->adc), "clock", qdev_get_clock_out( + DEVICE(&s->clk), "adc-clock")); + sysbus_realize(SYS_BUS_DEVICE(&s->adc), &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->adc), 0, NPCM8XX_ADC_BA); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->adc), 0, + npcm8xx_irq(s, NPCM8XX_ADC_IRQ)); + npcm8xx_write_adc_calibration(s); + + /* Timer Modules (TIM). Cannot fail. */ + QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm8xx_tim_addr) != ARRAY_SIZE(s->tim)); + for (i = 0; i < ARRAY_SIZE(s->tim); i++) { + SysBusDevice *sbd = SYS_BUS_DEVICE(&s->tim[i]); + int first_irq; + int j; + + /* Connect the timer clock. */ + qdev_connect_clock_in(DEVICE(&s->tim[i]), "clock", qdev_get_clock_out( + DEVICE(&s->clk), "timer-clock")); + + sysbus_realize(sbd, &error_abort); + sysbus_mmio_map(sbd, 0, npcm8xx_tim_addr[i]); + + first_irq = NPCM8XX_TIMER0_IRQ + i * NPCM7XX_TIMERS_PER_CTRL; + for (j = 0; j < NPCM7XX_TIMERS_PER_CTRL; j++) { + qemu_irq irq = npcm8xx_irq(s, first_irq + j); + sysbus_connect_irq(sbd, j, irq); + } + + /* IRQ for watchdogs */ + sysbus_connect_irq(sbd, NPCM7XX_TIMERS_PER_CTRL, + npcm8xx_irq(s, NPCM8XX_WDG0_IRQ + i)); + /* GPIO that connects clk module with watchdog */ + qdev_connect_gpio_out_named(DEVICE(&s->tim[i]), + NPCM7XX_WATCHDOG_RESET_GPIO_OUT, 0, + qdev_get_gpio_in_named(DEVICE(&s->clk), + NPCM7XX_WATCHDOG_RESET_GPIO_IN, i)); + } + + /* UART0..6 (16550 compatible) */ + for (i = 0; i < ARRAY_SIZE(npcm8xx_uart_addr); i++) { + serial_mm_init(get_system_memory(), npcm8xx_uart_addr[i], 2, + npcm8xx_irq(s, NPCM8XX_UART0_IRQ + i), 115200, + serial_hd(i), DEVICE_LITTLE_ENDIAN); + } + + /* Random Number Generator. Cannot fail. */ + sysbus_realize(SYS_BUS_DEVICE(&s->rng), &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->rng), 0, NPCM8XX_RNG_BA); + + /* GPIO modules. Cannot fail. */ + QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm8xx_gpio) != ARRAY_SIZE(s->gpio)); + for (i = 0; i < ARRAY_SIZE(s->gpio); i++) { + Object *obj = OBJECT(&s->gpio[i]); + + object_property_set_uint(obj, "reset-pullup", + npcm8xx_gpio[i].reset_pu, &error_abort); + object_property_set_uint(obj, "reset-pulldown", + npcm8xx_gpio[i].reset_pd, &error_abort); + object_property_set_uint(obj, "reset-osrc", + npcm8xx_gpio[i].reset_osrc, &error_abort); + object_property_set_uint(obj, "reset-odsc", + npcm8xx_gpio[i].reset_odsc, &error_abort); + sysbus_realize(SYS_BUS_DEVICE(obj), &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(obj), 0, npcm8xx_gpio[i].regs_addr); + sysbus_connect_irq(SYS_BUS_DEVICE(obj), 0, + npcm8xx_irq(s, NPCM8XX_GPIO0_IRQ + i)); + } + + /* SMBus modules. Cannot fail. */ + QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm8xx_smbus_addr) != ARRAY_SIZE(s->smbus)); + for (i = 0; i < ARRAY_SIZE(s->smbus); i++) { + Object *obj = OBJECT(&s->smbus[i]); + + sysbus_realize(SYS_BUS_DEVICE(obj), &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(obj), 0, npcm8xx_smbus_addr[i]); + sysbus_connect_irq(SYS_BUS_DEVICE(obj), 0, + npcm8xx_irq(s, NPCM8XX_SMBUS0_IRQ + i)); + } + + /* USB Host */ + QEMU_BUILD_BUG_ON(ARRAY_SIZE(s->ohci) != ARRAY_SIZE(s->ehci)); + for (i = 0; i < ARRAY_SIZE(s->ehci); i++) { + object_property_set_bool(OBJECT(&s->ehci[i]), "companion-enable", true, + &error_abort); + sysbus_realize(SYS_BUS_DEVICE(&s->ehci[i]), &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->ehci[i]), 0, npcm8xx_ehci_addr[i]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->ehci[i]), 0, + npcm8xx_irq(s, NPCM8XX_EHCI1_IRQ + 2 * i)); + } + for (i = 0; i < ARRAY_SIZE(s->ohci); i++) { + object_property_set_str(OBJECT(&s->ohci[i]), "masterbus", "usb-bus.0", + &error_abort); + object_property_set_uint(OBJECT(&s->ohci[i]), "num-ports", 1, + &error_abort); + object_property_set_uint(OBJECT(&s->ohci[i]), "firstport", i, + &error_abort); + sysbus_realize(SYS_BUS_DEVICE(&s->ohci[i]), &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->ohci[i]), 0, npcm8xx_ohci_addr[i]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->ohci[i]), 0, + npcm8xx_irq(s, NPCM8XX_OHCI1_IRQ + 2 * i)); + } + + /* PWM Modules. Cannot fail. */ + QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm8xx_pwm_addr) != ARRAY_SIZE(s->pwm)); + for (i = 0; i < ARRAY_SIZE(s->pwm); i++) { + SysBusDevice *sbd = SYS_BUS_DEVICE(&s->pwm[i]); + + qdev_connect_clock_in(DEVICE(&s->pwm[i]), "clock", qdev_get_clock_out( + DEVICE(&s->clk), "apb3-clock")); + sysbus_realize(sbd, &error_abort); + sysbus_mmio_map(sbd, 0, npcm8xx_pwm_addr[i]); + sysbus_connect_irq(sbd, i, npcm8xx_irq(s, NPCM8XX_PWM0_IRQ + i)); + } + + /* MFT Modules. Cannot fail. */ + QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm8xx_mft_addr) != ARRAY_SIZE(s->mft)); + for (i = 0; i < ARRAY_SIZE(s->mft); i++) { + SysBusDevice *sbd = SYS_BUS_DEVICE(&s->mft[i]); + + qdev_connect_clock_in(DEVICE(&s->mft[i]), "clock-in", + qdev_get_clock_out(DEVICE(&s->clk), + "apb4-clock")); + sysbus_realize(sbd, &error_abort); + sysbus_mmio_map(sbd, 0, npcm8xx_mft_addr[i]); + sysbus_connect_irq(sbd, 0, npcm8xx_irq(s, NPCM8XX_MFT0_IRQ + i)); + } + + /* + * Flash Interface Unit (FIU). Can fail if incorrect number of chip selects + * specified, but this is a programming error. + */ + QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm8xx_fiu) != ARRAY_SIZE(s->fiu)); + for (i = 0; i < ARRAY_SIZE(s->fiu); i++) { + SysBusDevice *sbd = SYS_BUS_DEVICE(&s->fiu[i]); + int j; + + object_property_set_int(OBJECT(sbd), "cs-count", + npcm8xx_fiu[i].cs_count, &error_abort); + object_property_set_int(OBJECT(sbd), "flash-size", + npcm8xx_fiu[i].flash_size, &error_abort); + sysbus_realize(sbd, &error_abort); + + sysbus_mmio_map(sbd, 0, npcm8xx_fiu[i].regs_addr); + for (j = 0; j < npcm8xx_fiu[i].cs_count; j++) { + sysbus_mmio_map(sbd, j + 1, npcm8xx_fiu[i].flash_addr[j]); + } + } + + /* RAM2 (SRAM) */ + memory_region_init_ram(&s->sram, OBJECT(dev), "ram2", + NPCM8XX_RAM2_SZ, &error_abort); + memory_region_add_subregion(get_system_memory(), NPCM8XX_RAM2_BA, &s->sram); + + /* RAM3 (SRAM) */ + memory_region_init_ram(&s->ram3, OBJECT(dev), "ram3", + NPCM8XX_RAM3_SZ, &error_abort); + memory_region_add_subregion(get_system_memory(), NPCM8XX_RAM3_BA, &s->ram3); + + /* Internal ROM */ + memory_region_init_rom(&s->irom, OBJECT(dev), "irom", NPCM8XX_ROM_SZ, + &error_abort); + memory_region_add_subregion(get_system_memory(), NPCM8XX_ROM_BA, &s->irom); + + /* SDHCI */ + sysbus_realize(SYS_BUS_DEVICE(&s->mmc), &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->mmc), 0, NPCM8XX_MMC_BA); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->mmc), 0, + npcm8xx_irq(s, NPCM8XX_MMC_IRQ)); + + + create_unimplemented_device("npcm8xx.shm", 0xc0001000, 4 * KiB); + create_unimplemented_device("npcm8xx.gicextra", 0xdfffa000, 24 * KiB); + create_unimplemented_device("npcm8xx.vdmx", 0xe0800000, 4 * KiB); + create_unimplemented_device("npcm8xx.pcierc", 0xe1000000, 64 * KiB); + create_unimplemented_device("npcm8xx.rootc", 0xe8000000, 128 * MiB); + create_unimplemented_device("npcm8xx.kcs", 0xf0007000, 4 * KiB); + create_unimplemented_device("npcm8xx.gfxi", 0xf000e000, 4 * KiB); + create_unimplemented_device("npcm8xx.fsw", 0xf000f000, 4 * KiB); + create_unimplemented_device("npcm8xx.bt", 0xf0030000, 4 * KiB); + create_unimplemented_device("npcm8xx.espi", 0xf009f000, 4 * KiB); + create_unimplemented_device("npcm8xx.peci", 0xf0100000, 4 * KiB); + create_unimplemented_device("npcm8xx.siox[1]", 0xf0101000, 4 * KiB); + create_unimplemented_device("npcm8xx.siox[2]", 0xf0102000, 4 * KiB); + create_unimplemented_device("npcm8xx.tmps", 0xf0188000, 4 * KiB); + create_unimplemented_device("npcm8xx.pspi", 0xf0201000, 4 * KiB); + create_unimplemented_device("npcm8xx.viru1", 0xf0204000, 4 * KiB); + create_unimplemented_device("npcm8xx.viru2", 0xf0205000, 4 * KiB); + create_unimplemented_device("npcm8xx.jtm1", 0xf0208000, 4 * KiB); + create_unimplemented_device("npcm8xx.jtm2", 0xf0209000, 4 * KiB); + create_unimplemented_device("npcm8xx.flm0", 0xf0210000, 4 * KiB); + create_unimplemented_device("npcm8xx.flm1", 0xf0211000, 4 * KiB); + create_unimplemented_device("npcm8xx.flm2", 0xf0212000, 4 * KiB); + create_unimplemented_device("npcm8xx.flm3", 0xf0213000, 4 * KiB); + create_unimplemented_device("npcm8xx.ahbpci", 0xf0400000, 1 * MiB); + create_unimplemented_device("npcm8xx.dap", 0xf0500000, 960 * KiB); + create_unimplemented_device("npcm8xx.mcphy", 0xf05f0000, 64 * KiB); + create_unimplemented_device("npcm8xx.pcs", 0xf0780000, 256 * KiB); + create_unimplemented_device("npcm8xx.tsgen", 0xf07fc000, 8 * KiB); + create_unimplemented_device("npcm8xx.gmac1", 0xf0802000, 8 * KiB); + create_unimplemented_device("npcm8xx.gmac2", 0xf0804000, 8 * KiB); + create_unimplemented_device("npcm8xx.gmac3", 0xf0806000, 8 * KiB); + create_unimplemented_device("npcm8xx.gmac4", 0xf0808000, 8 * KiB); + create_unimplemented_device("npcm8xx.copctl", 0xf080c000, 4 * KiB); + create_unimplemented_device("npcm8xx.tipctl", 0xf080d000, 4 * KiB); + create_unimplemented_device("npcm8xx.rst", 0xf080e000, 4 * KiB); + create_unimplemented_device("npcm8xx.vcd", 0xf0810000, 64 * KiB); + create_unimplemented_device("npcm8xx.ece", 0xf0820000, 8 * KiB); + create_unimplemented_device("npcm8xx.vdma", 0xf0822000, 8 * KiB); + create_unimplemented_device("npcm8xx.usbd[0]", 0xf0830000, 4 * KiB); + create_unimplemented_device("npcm8xx.usbd[1]", 0xf0831000, 4 * KiB); + create_unimplemented_device("npcm8xx.usbd[2]", 0xf0832000, 4 * KiB); + create_unimplemented_device("npcm8xx.usbd[3]", 0xf0833000, 4 * KiB); + create_unimplemented_device("npcm8xx.usbd[4]", 0xf0834000, 4 * KiB); + create_unimplemented_device("npcm8xx.usbd[5]", 0xf0835000, 4 * KiB); + create_unimplemented_device("npcm8xx.usbd[6]", 0xf0836000, 4 * KiB); + create_unimplemented_device("npcm8xx.usbd[7]", 0xf0837000, 4 * KiB); + create_unimplemented_device("npcm8xx.usbd[8]", 0xf0838000, 4 * KiB); + create_unimplemented_device("npcm8xx.usbd[9]", 0xf0839000, 4 * KiB); + create_unimplemented_device("npcm8xx.pci_mbox1", 0xf0848000, 64 * KiB); + create_unimplemented_device("npcm8xx.gdma0", 0xf0850000, 4 * KiB); + create_unimplemented_device("npcm8xx.gdma1", 0xf0851000, 4 * KiB); + create_unimplemented_device("npcm8xx.gdma2", 0xf0852000, 4 * KiB); + create_unimplemented_device("npcm8xx.aes", 0xf0858000, 4 * KiB); + create_unimplemented_device("npcm8xx.des", 0xf0859000, 4 * KiB); + create_unimplemented_device("npcm8xx.sha", 0xf085a000, 4 * KiB); + create_unimplemented_device("npcm8xx.pci_mbox2", 0xf0868000, 64 * KiB); + create_unimplemented_device("npcm8xx.i3c0", 0xfff10000, 4 * KiB); + create_unimplemented_device("npcm8xx.i3c1", 0xfff11000, 4 * KiB); + create_unimplemented_device("npcm8xx.i3c2", 0xfff12000, 4 * KiB); + create_unimplemented_device("npcm8xx.i3c3", 0xfff13000, 4 * KiB); + create_unimplemented_device("npcm8xx.i3c4", 0xfff14000, 4 * KiB); + create_unimplemented_device("npcm8xx.i3c5", 0xfff15000, 4 * KiB); + create_unimplemented_device("npcm8xx.spixcs0", 0xf8000000, 16 * MiB); + create_unimplemented_device("npcm8xx.spixcs1", 0xf9000000, 16 * MiB); + create_unimplemented_device("npcm8xx.spix", 0xfb001000, 4 * KiB); + create_unimplemented_device("npcm8xx.vect", 0xffff0000, 256); +} + +static const Property npcm8xx_properties[] = { + DEFINE_PROP_LINK("dram-mr", NPCM8xxState, dram, TYPE_MEMORY_REGION, + MemoryRegion *), +}; + +static void npcm8xx_class_init(ObjectClass *oc, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(oc); + NPCM8xxClass *nc = NPCM8XX_CLASS(oc); + + dc->realize = npcm8xx_realize; + dc->user_creatable = false; + nc->disabled_modules = 0x00000000; + nc->num_cpus = NPCM8XX_MAX_NUM_CPUS; + device_class_set_props(dc, npcm8xx_properties); +} + +static const TypeInfo npcm8xx_soc_types[] = { + { + .name = TYPE_NPCM8XX, + .parent = TYPE_DEVICE, + .instance_size = sizeof(NPCM8xxState), + .instance_init = npcm8xx_init, + .class_size = sizeof(NPCM8xxClass), + .class_init = npcm8xx_class_init, + }, +}; + +DEFINE_TYPES(npcm8xx_soc_types); diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config NPCM7XX select PCA954X select USB_OHCI_SYSBUS +config NPCM8XX + bool + default y + depends on TCG && AARCH64 + select ARM_GIC + select SMBUS + select PL310 # cache controller + select NPCM7XX + select SERIAL + select SSI + select UNIMP + + config FSL_IMX25 bool default y diff --git a/hw/arm/meson.build b/hw/arm/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/meson.build +++ b/hw/arm/meson.build @@ -XXX,XX +XXX,XX @@ arm_ss.add(when: 'CONFIG_MUSICPAL', if_true: files('musicpal.c')) arm_ss.add(when: 'CONFIG_NETDUINOPLUS2', if_true: files('netduinoplus2.c')) arm_ss.add(when: 'CONFIG_OLIMEX_STM32_H405', if_true: files('olimex-stm32-h405.c')) arm_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx.c', 'npcm7xx_boards.c')) +arm_ss.add(when: 'CONFIG_NPCM8XX', if_true: files('npcm8xx.c')) arm_ss.add(when: 'CONFIG_REALVIEW', if_true: files('realview.c')) arm_ss.add(when: 'CONFIG_SBSA_REF', if_true: files('sbsa-ref.c')) arm_ss.add(when: 'CONFIG_STELLARIS', if_true: files('stellaris.c')) -- 2.43.0 From: Hao Wu <wuhaotsh@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20250219184609.1839281-17-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/npcm8xx.h | 21 ++++ hw/arm/npcm8xx_boards.c | 253 +++++++++++++++++++++++++++++++++++++++ hw/arm/meson.build | 2 +- 3 files changed, 275 insertions(+), 1 deletion(-) create mode 100644 hw/arm/npcm8xx_boards.c diff --git a/include/hw/arm/npcm8xx.h b/include/hw/arm/npcm8xx.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/npcm8xx.h +++ b/include/hw/arm/npcm8xx.h @@ -XXX,XX +XXX,XX @@ #define NPCM8XX_NR_PWM_MODULES 3 +struct NPCM8xxMachine { + MachineState parent_obj; + + /* + * PWM fan splitter. each splitter connects to one PWM output and + * multiple MFT inputs. + */ + SplitIRQ fan_splitter[NPCM8XX_NR_PWM_MODULES * + NPCM7XX_PWM_PER_MODULE]; +}; + + +struct NPCM8xxMachineClass { + MachineClass parent_class; + + const char *soc_type; +}; + +#define TYPE_NPCM8XX_MACHINE MACHINE_TYPE_NAME("npcm8xx") +OBJECT_DECLARE_TYPE(NPCM8xxMachine, NPCM8xxMachineClass, NPCM8XX_MACHINE) + struct NPCM8xxState { DeviceState parent_obj; diff --git a/hw/arm/npcm8xx_boards.c b/hw/arm/npcm8xx_boards.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/npcm8xx_boards.c @@ -XXX,XX +XXX,XX @@ +/* + * Machine definitions for boards featuring an NPCM8xx SoC. + * + * Copyright 2021 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" + +#include "chardev/char.h" +#include "hw/arm/npcm8xx.h" +#include "hw/core/cpu.h" +#include "hw/loader.h" +#include "hw/qdev-core.h" +#include "hw/qdev-properties.h" +#include "qapi/error.h" +#include "qemu/error-report.h" +#include "qemu/datadir.h" +#include "qemu/units.h" + +#define NPCM845_EVB_POWER_ON_STRAPS 0x000017ff + +static const char npcm8xx_default_bootrom[] = "npcm8xx_bootrom.bin"; + +static void npcm8xx_load_bootrom(MachineState *machine, NPCM8xxState *soc) +{ + const char *bios_name = machine->firmware ?: npcm8xx_default_bootrom; + g_autofree char *filename = NULL; + int ret; + + filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name); + if (!filename) { + error_report("Could not find ROM image '%s'", bios_name); + if (!machine->kernel_filename) { + /* We can't boot without a bootrom or a kernel image. */ + exit(1); + } + return; + } + ret = load_image_mr(filename, machine->ram); + if (ret < 0) { + error_report("Failed to load ROM image '%s'", filename); + exit(1); + } +} + +static void npcm8xx_connect_flash(NPCM7xxFIUState *fiu, int cs_no, + const char *flash_type, DriveInfo *dinfo) +{ + DeviceState *flash; + qemu_irq flash_cs; + + flash = qdev_new(flash_type); + if (dinfo) { + qdev_prop_set_drive(flash, "drive", blk_by_legacy_dinfo(dinfo)); + } + qdev_realize_and_unref(flash, BUS(fiu->spi), &error_fatal); + + flash_cs = qdev_get_gpio_in_named(flash, SSI_GPIO_CS, 0); + qdev_connect_gpio_out_named(DEVICE(fiu), "cs", cs_no, flash_cs); +} + +static void npcm8xx_connect_dram(NPCM8xxState *soc, MemoryRegion *dram) +{ + memory_region_add_subregion(get_system_memory(), NPCM8XX_DRAM_BA, dram); + + object_property_set_link(OBJECT(soc), "dram-mr", OBJECT(dram), + &error_abort); +} + +static NPCM8xxState *npcm8xx_create_soc(MachineState *machine, + uint32_t hw_straps) +{ + NPCM8xxMachineClass *nmc = NPCM8XX_MACHINE_GET_CLASS(machine); + Object *obj; + + obj = object_new_with_props(nmc->soc_type, OBJECT(machine), "soc", + &error_abort, NULL); + object_property_set_uint(obj, "power-on-straps", hw_straps, &error_abort); + + return NPCM8XX(obj); +} + +static I2CBus *npcm8xx_i2c_get_bus(NPCM8xxState *soc, uint32_t num) +{ + g_assert(num < ARRAY_SIZE(soc->smbus)); + return I2C_BUS(qdev_get_child_bus(DEVICE(&soc->smbus[num]), "i2c-bus")); +} + +static void npcm8xx_init_pwm_splitter(NPCM8xxMachine *machine, + NPCM8xxState *soc, const int *fan_counts) +{ + SplitIRQ *splitters = machine->fan_splitter; + + /* + * PWM 0~3 belong to module 0 output 0~3. + * PWM 4~7 belong to module 1 output 0~3. + */ + for (int i = 0; i < NPCM8XX_NR_PWM_MODULES; ++i) { + for (int j = 0; j < NPCM7XX_PWM_PER_MODULE; ++j) { + int splitter_no = i * NPCM7XX_PWM_PER_MODULE + j; + DeviceState *splitter; + + if (fan_counts[splitter_no] < 1) { + continue; + } + object_initialize_child(OBJECT(machine), "fan-splitter[*]", + &splitters[splitter_no], TYPE_SPLIT_IRQ); + splitter = DEVICE(&splitters[splitter_no]); + qdev_prop_set_uint16(splitter, "num-lines", + fan_counts[splitter_no]); + qdev_realize(splitter, NULL, &error_abort); + qdev_connect_gpio_out_named(DEVICE(&soc->pwm[i]), "duty-gpio-out", + j, qdev_get_gpio_in(splitter, 0)); + } + } +} + +static void npcm8xx_connect_pwm_fan(NPCM8xxState *soc, SplitIRQ *splitter, + int fan_no, int output_no) +{ + DeviceState *fan; + int fan_input; + qemu_irq fan_duty_gpio; + + g_assert(fan_no >= 0 && fan_no <= NPCM7XX_MFT_MAX_FAN_INPUT); + /* + * Fan 0~1 belong to module 0 input 0~1. + * Fan 2~3 belong to module 1 input 0~1. + * ... + * Fan 14~15 belong to module 7 input 0~1. + * Fan 16~17 belong to module 0 input 2~3. + * Fan 18~19 belong to module 1 input 2~3. + */ + if (fan_no < 16) { + fan = DEVICE(&soc->mft[fan_no / 2]); + fan_input = fan_no % 2; + } else { + fan = DEVICE(&soc->mft[(fan_no - 16) / 2]); + fan_input = fan_no % 2 + 2; + } + + /* Connect the Fan to PWM module */ + fan_duty_gpio = qdev_get_gpio_in_named(fan, "duty", fan_input); + qdev_connect_gpio_out(DEVICE(splitter), output_no, fan_duty_gpio); +} + +static void npcm845_evb_i2c_init(NPCM8xxState *soc) +{ + /* tmp100 temperature sensor on SVB, tmp105 is compatible */ + i2c_slave_create_simple(npcm8xx_i2c_get_bus(soc, 6), "tmp105", 0x48); +} + +static void npcm845_evb_fan_init(NPCM8xxMachine *machine, NPCM8xxState *soc) +{ + SplitIRQ *splitter = machine->fan_splitter; + static const int fan_counts[] = {2, 2, 2, 2, 2, 2, 2, 2, 0, 0, 0, 0}; + + npcm8xx_init_pwm_splitter(machine, soc, fan_counts); + npcm8xx_connect_pwm_fan(soc, &splitter[0], 0x00, 0); + npcm8xx_connect_pwm_fan(soc, &splitter[0], 0x01, 1); + npcm8xx_connect_pwm_fan(soc, &splitter[1], 0x02, 0); + npcm8xx_connect_pwm_fan(soc, &splitter[1], 0x03, 1); + npcm8xx_connect_pwm_fan(soc, &splitter[2], 0x04, 0); + npcm8xx_connect_pwm_fan(soc, &splitter[2], 0x05, 1); + npcm8xx_connect_pwm_fan(soc, &splitter[3], 0x06, 0); + npcm8xx_connect_pwm_fan(soc, &splitter[3], 0x07, 1); + npcm8xx_connect_pwm_fan(soc, &splitter[4], 0x08, 0); + npcm8xx_connect_pwm_fan(soc, &splitter[4], 0x09, 1); + npcm8xx_connect_pwm_fan(soc, &splitter[5], 0x0a, 0); + npcm8xx_connect_pwm_fan(soc, &splitter[5], 0x0b, 1); + npcm8xx_connect_pwm_fan(soc, &splitter[6], 0x0c, 0); + npcm8xx_connect_pwm_fan(soc, &splitter[6], 0x0d, 1); + npcm8xx_connect_pwm_fan(soc, &splitter[7], 0x0e, 0); + npcm8xx_connect_pwm_fan(soc, &splitter[7], 0x0f, 1); +} + +static void npcm845_evb_init(MachineState *machine) +{ + NPCM8xxState *soc; + + soc = npcm8xx_create_soc(machine, NPCM845_EVB_POWER_ON_STRAPS); + npcm8xx_connect_dram(soc, machine->ram); + qdev_realize(DEVICE(soc), NULL, &error_fatal); + + npcm8xx_load_bootrom(machine, soc); + npcm8xx_connect_flash(&soc->fiu[0], 0, "w25q256", drive_get(IF_MTD, 0, 0)); + npcm845_evb_i2c_init(soc); + npcm845_evb_fan_init(NPCM8XX_MACHINE(machine), soc); + npcm8xx_load_kernel(machine, soc); +} + +static void npcm8xx_set_soc_type(NPCM8xxMachineClass *nmc, const char *type) +{ + NPCM8xxClass *sc = NPCM8XX_CLASS(object_class_by_name(type)); + MachineClass *mc = MACHINE_CLASS(nmc); + + nmc->soc_type = type; + mc->default_cpus = mc->min_cpus = mc->max_cpus = sc->num_cpus; +} + +static void npcm8xx_machine_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + static const char * const valid_cpu_types[] = { + ARM_CPU_TYPE_NAME("cortex-a9"), + NULL + }; + + mc->no_floppy = 1; + mc->no_cdrom = 1; + mc->no_parallel = 1; + mc->default_ram_id = "ram"; + mc->valid_cpu_types = valid_cpu_types; +} + +static void npcm845_evb_machine_class_init(ObjectClass *oc, void *data) +{ + NPCM8xxMachineClass *nmc = NPCM8XX_MACHINE_CLASS(oc); + MachineClass *mc = MACHINE_CLASS(oc); + + npcm8xx_set_soc_type(nmc, TYPE_NPCM8XX); + + mc->desc = "Nuvoton NPCM845 Evaluation Board (Cortex-A35)"; + mc->init = npcm845_evb_init; + mc->default_ram_size = 1 * GiB; +}; + +static const TypeInfo npcm8xx_machine_types[] = { + { + .name = TYPE_NPCM8XX_MACHINE, + .parent = TYPE_MACHINE, + .instance_size = sizeof(NPCM8xxMachine), + .class_size = sizeof(NPCM8xxMachineClass), + .class_init = npcm8xx_machine_class_init, + .abstract = true, + }, { + .name = MACHINE_TYPE_NAME("npcm845-evb"), + .parent = TYPE_NPCM8XX_MACHINE, + .class_init = npcm845_evb_machine_class_init, + }, +}; + +DEFINE_TYPES(npcm8xx_machine_types) diff --git a/hw/arm/meson.build b/hw/arm/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/meson.build +++ b/hw/arm/meson.build @@ -XXX,XX +XXX,XX @@ arm_ss.add(when: 'CONFIG_MUSICPAL', if_true: files('musicpal.c')) arm_ss.add(when: 'CONFIG_NETDUINOPLUS2', if_true: files('netduinoplus2.c')) arm_ss.add(when: 'CONFIG_OLIMEX_STM32_H405', if_true: files('olimex-stm32-h405.c')) arm_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx.c', 'npcm7xx_boards.c')) -arm_ss.add(when: 'CONFIG_NPCM8XX', if_true: files('npcm8xx.c')) +arm_ss.add(when: 'CONFIG_NPCM8XX', if_true: files('npcm8xx.c', 'npcm8xx_boards.c')) arm_ss.add(when: 'CONFIG_REALVIEW', if_true: files('realview.c')) arm_ss.add(when: 'CONFIG_SBSA_REF', if_true: files('sbsa-ref.c')) arm_ss.add(when: 'CONFIG_STELLARIS', if_true: files('stellaris.c')) -- 2.43.0 From: Hao Wu <wuhaotsh@google.com> NPCM8XX SoC is the successor of the NPCM7XX. It features quad-core Cortex-A35 (Armv8, 64-bit) CPUs and some additional peripherals. This document describes the NPCM8XX SoC and an evaluation board (NPCM 845 EVB). Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20250219184609.1839281-18-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/nuvoton.rst | 27 ++++++++++++++++++++------- hw/arm/npcm8xx_boards.c | 1 + 2 files changed, 21 insertions(+), 7 deletions(-) diff --git a/docs/system/arm/nuvoton.rst b/docs/system/arm/nuvoton.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/nuvoton.rst +++ b/docs/system/arm/nuvoton.rst @@ -XXX,XX +XXX,XX @@ -Nuvoton iBMC boards (``kudo-bmc``, ``mori-bmc``, ``npcm750-evb``, ``quanta-gbs-bmc``, ``quanta-gsj``) -===================================================================================================== +Nuvoton iBMC boards (``kudo-bmc``, ``mori-bmc``, ``npcm750-evb``, ``quanta-gbs-bmc``, ``quanta-gsj``, ``npcm845-evb``) +====================================================================================================================== -The `Nuvoton iBMC`_ chips (NPCM7xx) are a family of ARM-based SoCs that are +The `Nuvoton iBMC`_ chips are a family of Arm-based SoCs that are designed to be used as Baseboard Management Controllers (BMCs) in various -servers. They all feature one or two ARM Cortex-A9 CPU cores, as well as an -assortment of peripherals targeted for either Enterprise or Data Center / -Hyperscale applications. The former is a superset of the latter, so NPCM750 has -all the peripherals of NPCM730 and more. +servers. Currently there are two families: NPCM7XX series and +NPCM8XX series. NPCM7XX series feature one or two Arm Cortex-A9 CPU cores, +while NPCM8XX feature 4 Arm Cortex-A35 CPU cores. Both series contain a +different assortment of peripherals targeted for either Enterprise or Data +Center / Hyperscale applications. .. _Nuvoton iBMC: https://www.nuvoton.com/products/cloud-computing/ibmc/ @@ -XXX,XX +XXX,XX @@ There are also two more SoCs, NPCM710 and NPCM705, which are single-core variants of NPCM750 and NPCM730, respectively. These are currently not supported by QEMU. +The NPCM8xx SoC is the successor of the NPCM7xx SoC. It has 4 Cortex-A35 cores. +The following machines are based on this chip : + +- ``npcm845-evb`` Nuvoton NPCM845 Evaluation board + Supported devices ----------------- @@ -XXX,XX +XXX,XX @@ Missing devices * System Wake-up Control (SWC) * Shared memory (SHM) * eSPI slave interface + * Block-transfer interface (8XX only) + * Virtual UART (8XX only) * Ethernet controller (GMAC) * USB device (USBD) @@ -XXX,XX +XXX,XX @@ Missing devices * Video capture * Encoding compression engine * Security features + * I3C buses (8XX only) + * Temperature sensor interface (8XX only) + * Virtual UART (8XX only) + * Flash monitor (8XX only) + * JTAG master (8XX only) Boot options ------------ diff --git a/hw/arm/npcm8xx_boards.c b/hw/arm/npcm8xx_boards.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm8xx_boards.c +++ b/hw/arm/npcm8xx_boards.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "chardev/char.h" +#include "hw/boards.h" #include "hw/arm/npcm8xx.h" #include "hw/core/cpu.h" #include "hw/loader.h" -- 2.43.0 Hi; here's another arm pullreq; main parts here are the new i.MX 8MM EVK board, and a lot of refactoring. thanks -- PMM The following changes since commit aa15257174da180c6a8a9d58f87319cfe61c5520: Merge tag 'pbouvier/pr/plugins-20260424' of https://gitlab.com/p-b-o/qemu into staging (2026-04-25 10:22:04 -0400) are available in the Git repository at: https://gitlab.com/pm215/qemu.git tags/pull-target-arm-20260427 for you to fetch changes up to 4575da5ecb7a27544aa6da1f78e700e8100ceaea: target/arm: report register in WFIT syndromes (2026-04-27 11:46:34 +0100) ---------------------------------------------------------------- target-arm queue: docs/system: add FEAT_AA32 and FEAT_AA64 to emulation list hw/arm: Add the i.MX 8MM EVK(Evaluation Kit) board target/arm: Build M-profile helper code once only hw/arm: Remove hw_error() for the unimplemented CM_LMBUSCNT register hw: Move ARM_SYSCTL_GPIO definitions to arm sysctl specific header target/arm: Allow 'aarch64=off' to be set for TCG CPUs target/arm: Allow some sysregs to not have to be an exact match for migration hw/arm/raspi4b: NOP all DTB nodes when removing unimplemented devices hw/arm/fsl-imx6ul: Implement LCDIF display device target/arm: Refactor syndrome value code to use registerfields target/arm: Report the register in WFxT syndromes ---------------------------------------------------------------- Alex Bennée (24): docs/system: add FEAT_AA32 and FEAT_AA64 to emulation list target/arm: migrate basic syndrome helpers to registerfields target/arm: migrate system/cp trap syndromes to registerfields target/arm: migrate FP/SIMD trap syndromes to registerfields target/arm: migrate eret trap syndromes to registerfields target/arm: migrate SME trap syndromes to registerfields target/arm: migrate PAC trap syndromes to registerfields target/arm: migrate BTI trap syndromes to registerfields target/arm: migrate BXJ trap syndromes to registerfields target/arm: migrate Granule Protection traps to registerfields target/arm: migrate fault syndromes to registerfields target/arm: migrate debug syndromes to registerfields target/arm: migrate wfx syndromes to registerfields target/arm: migrate gcs syndromes to registerfields target/arm: migrate memory op syndromes to registerfields target/arm: migrate check_hcr_el2_trap to use syndrome helper target/arm: use syndrome helpers in arm_cpu_do_interrupt_aarch32_hyp target/arm: use syndrome helpers to set SAME_EL EC bit target/arm: make whpx use syndrome helpers for decode target/arm: make hvf use syndrome helpers for decode target/arm: use syndrome helpers in merge_syn_data_abort target/arm: use syndrome helpers to query VNCR bit target/arm: remove old syndrome defines target/arm: report register in WFIT syndromes Eric Auger (7): target/arm/cpu: Introduce the infrastructure for cpreg migration tolerances target/arm/machine: Handle ToleranceNotOnBothEnds migration tolerances target/arm/machine: Handle ToleranceOnlySrcTestValue migration tolerance target/arm/cpu64: Mitigate migration failures due to spurious TCR_EL1, PIRE0_EL1 and PIR_EL1 target/arm/cpu64: Define cpreg migration tolerance for KVM_REG_ARM_VENDOR_HYP_BMAP_2 target/arm/helper: Define cpreg migration tolerance for DGBDTR_EL0 Revert "target/arm: Reinstate bogus AArch32 DBGDTRTX register for migration compat" Gaurav Sharma (15): hw/arm: Add the i.MX 8MM EVK(Evaluation Kit) board hw/misc/imx8mp_analog: Add property to analog device hw/arm/fsl-imx8mm: Add Analog device IP to iMX8MM SOC hw/arm/fsl-imx8mm: Add Clock Control Module IP to iMX8MM hw/arm/fsl-imx8mm: Implemented support for SNVS hw/arm/fsl-imx8mm: Adding support for USDHC storage controllers hw/arm/fsl-imx8mm: Add PCIe support hw/arm/fsl-imx8mm: Add GPIO controllers hw/arm/fsl-imx8mm: Adding support for I2C emulation hw/arm/fsl-imx8mm: Adding support for SPI controller hw/arm/fsl-imx8mm: Adding support for Watchdog Timers hw/arm/fsl-imx8mm: Adding support for General Purpose Timers hw/arm/fsl-imx8mm: Adding support for ENET ethernet controller hw/arm/fsl-imx8mm: Adding support for USB controller hw/arm/fsl-imx8mm: Adding functional testing of iMX8MM emulation Osama Abdelkader (1): hw/arm/raspi4b: NOP all DTB nodes when removing unimplemented devices Peter Maydell (4): hw: Move ARM_SYSCTL_GPIO definitions to arm sysctl specific header target/arm: Clear AArch64 ID regs from ARMISARegisters if AArch64 disabled target/arm: Allow 'aarch64=off' to be set for TCG CPUs tests/functional/aarch64: Add basic test of TCG aarch64=off Philippe Mathieu-Daudé (9): target/arm: Ignore endianness when setting MTE tags target/arm: Explode MO_TExx -> MO_TE | MO_xx target/arm: Hoist MO_TE into mve_advance_vpt() target/arm: Hoist MO_TE into MVE DO_VSTR() macro target/arm: Introduce mo_endian() helper target/arm: Replace MO_TE -> mo_endian() for MVE helpers target/arm: Compile mve_helper.c once target/arm: Replace MO_TE -> mo_endian() for Cortex-M helpers target/arm: Compile m_helper.c once Thomas Huth (1): hw/arm: Remove hw_error() for the unimplemented CM_LMBUSCNT register Yucai Liu (2): hw/display: Add i.MX6UL LCDIF device model hw/arm/fsl-imx6ul: Wire in the LCDIF device model MAINTAINERS | 16 +- docs/system/arm/cpu-features.rst | 10 +- docs/system/arm/emulation.rst | 2 + docs/system/arm/{imx8mp-evk.rst => imx8m.rst} | 49 +- docs/system/target-arm.rst | 2 +- hw/arm/Kconfig | 25 + hw/arm/fsl-imx6ul.c | 12 +- hw/arm/fsl-imx8mm.c | 704 ++++++++++++++++++++++ hw/arm/imx8mm-evk.c | 130 ++++ hw/arm/integratorcp.c | 3 - hw/arm/meson.build | 2 + hw/arm/raspi4b.c | 10 +- hw/arm/realview.c | 2 +- hw/arm/vexpress.c | 2 +- hw/arm/virt.c | 1 - hw/display/Kconfig | 4 + hw/display/imx6ul_lcdif.c | 453 ++++++++++++++ hw/display/meson.build | 1 + hw/misc/arm_sysctl.c | 2 +- hw/misc/imx8mp_analog.c | 12 +- hw/timer/imx_gpt.c | 26 + hw/vmapple/vmapple.c | 1 - include/hw/arm/fsl-imx6ul.h | 4 +- include/hw/arm/fsl-imx8mm.h | 242 ++++++++ include/hw/arm/primecell.h | 12 - include/hw/display/imx6ul_lcdif.h | 37 ++ include/hw/misc/arm_sysctl.h | 16 + include/hw/misc/imx8mp_analog.h | 3 + include/hw/timer/imx_gpt.h | 2 + target/arm/cpu-features.h | 5 + target/arm/cpu.c | 153 ++++- target/arm/cpu.h | 4 +- target/arm/cpu64.c | 39 ++ target/arm/debug_helper.c | 29 - target/arm/helper.c | 27 +- target/arm/hvf/hvf.c | 14 +- target/arm/internals.h | 60 ++ target/arm/machine.c | 33 +- target/arm/syndrome.h | 595 ++++++++++++++---- target/arm/tcg/debug.c | 2 +- target/arm/tcg/helper-a64.c | 2 +- target/arm/tcg/helper-defs.h | 2 +- target/arm/tcg/m_helper.c | 8 +- target/arm/tcg/meson.build | 6 +- target/arm/tcg/mve_helper.c | 102 ++-- target/arm/tcg/op_helper.c | 7 +- target/arm/tcg/tlb_helper.c | 6 +- target/arm/tcg/translate-a64.c | 2 +- target/arm/tcg/vfp_helper.c | 5 +- target/arm/trace-events | 2 + target/arm/whpx/whpx-all.c | 13 +- tests/functional/aarch64/meson.build | 3 + tests/functional/aarch64/test_imx8mm_evk.py | 69 +++ tests/functional/aarch64/test_virt_aarch64_off.py | 37 ++ tests/qtest/arm-cpu-features.c | 8 +- 55 files changed, 2743 insertions(+), 275 deletions(-) rename docs/system/arm/{imx8mp-evk.rst => imx8m.rst} (58%) create mode 100644 hw/arm/fsl-imx8mm.c create mode 100644 hw/arm/imx8mm-evk.c create mode 100644 hw/display/imx6ul_lcdif.c create mode 100644 include/hw/arm/fsl-imx8mm.h delete mode 100644 include/hw/arm/primecell.h create mode 100644 include/hw/display/imx6ul_lcdif.h create mode 100644 include/hw/misc/arm_sysctl.h create mode 100755 tests/functional/aarch64/test_imx8mm_evk.py create mode 100755 tests/functional/aarch64/test_virt_aarch64_off.py From: Alex Bennée <alex.bennee@linaro.org> This is just a documentation tweak as we already support both. FEAT_AA32 implies FEAT_AA32EL0. FEAT_AA64 implies FEAT_AA64EL[0123]. This is however useful if you are using emulation.rst as a source of truth of what QEMU emulates and when cross checking with Features.json from Arm. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260421093506.616307-1-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 2 ++ 1 file changed, 2 insertions(+) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ QEMU's TCG emulation includes support for the Armv5, Armv6, Armv7, Armv8 and Armv9 versions of the A-profile architecture. It also has support for the following architecture extensions: +- FEAT_AA32 (PE Support for AArch32) - FEAT_AA32BF16 (AArch32 BFloat16 instructions) - FEAT_AA32EL0 (Support for AArch32 at EL0) - FEAT_AA32EL1 (Support for AArch32 at EL1) @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_AA32EL3 (Support for AArch32 at EL3) - FEAT_AA32HPD (AArch32 hierarchical permission disables) - FEAT_AA32I8MM (AArch32 Int8 matrix multiplication instructions) +- FEAT_AA64 (PE uses AArch64 after last reboot) - FEAT_AA64EL0 (Support for AArch64 at EL0) - FEAT_AA64EL1 (Support for AArch64 at EL1) - FEAT_AA64EL2 (Support for AArch64 at EL2) -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> Implemented CPUs, RAM, UARTs and Interrupt Controller Other peripherals are represented as TYPE_UNIMPLEMENTED_DEVICE Complete memory map of the SoC is provided. Set default RAM size to 2GB and default CPU count to 4 to match the real i.MX8MM EVK hardware configuration. Documentation is shared with imx8mp-evk to avoid duplication. Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> [PMM: fixed over-long lines in doc] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 11 +- docs/system/arm/{imx8mp-evk.rst => imx8m.rst} | 49 ++- docs/system/target-arm.rst | 2 +- hw/arm/Kconfig | 12 + hw/arm/fsl-imx8mm.c | 377 ++++++++++++++++++ hw/arm/imx8mm-evk.c | 112 ++++++ hw/arm/meson.build | 2 + include/hw/arm/fsl-imx8mm.h | 158 ++++++++ 8 files changed, 709 insertions(+), 14 deletions(-) rename docs/system/arm/{imx8mp-evk.rst => imx8m.rst} (58%) create mode 100644 hw/arm/fsl-imx8mm.c create mode 100644 hw/arm/imx8mm-evk.c create mode 100644 include/hw/arm/fsl-imx8mm.h diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/pci-host/designware.c F: include/hw/pci-host/designware.h F: docs/system/arm/mcimx7d-sabre.rst +MCIMX8MM-EVK / iMX8MM +M: Gaurav Sharma <gaurav.sharma_7@nxp.com> +L: qemu-arm@nongnu.org +S: Maintained +F: hw/arm/fsl-imx8mm.c +F: hw/arm/imx8mm-evk.c +F: include/hw/arm/fsl-imx8mm.h +F: docs/system/arm/imx8m.rst + MCIMX8MP-EVK / i.MX8MP M: Bernhard Beschow <shentey@gmail.com> L: qemu-arm@nongnu.org @@ -XXX,XX +XXX,XX @@ F: hw/rtc/rs5c372.c F: include/hw/arm/fsl-imx8mp.h F: include/hw/misc/imx8mp_*.h F: include/hw/pci-host/fsl_imx8m_phy.h -F: docs/system/arm/imx8mp-evk.rst +F: docs/system/arm/imx8m.rst F: tests/functional/aarch64/test_imx8mp_evk.py F: tests/qtest/rs5c372-test.c diff --git a/docs/system/arm/imx8mp-evk.rst b/docs/system/arm/imx8m.rst similarity index 58% rename from docs/system/arm/imx8mp-evk.rst rename to docs/system/arm/imx8m.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/imx8mp-evk.rst +++ b/docs/system/arm/imx8m.rst @@ -XXX,XX +XXX,XX @@ -NXP i.MX 8M Plus Evaluation Kit (``imx8mp-evk``) -================================================ +NXP i.MX 8M Plus and i.MX 8M Mini Evaluation Kits (``imx8mp-evk``, ``imx8mm-evk``) +================================================================================== -The ``imx8mp-evk`` machine models the i.MX 8M Plus Evaluation Kit, based on an -i.MX 8M Plus SoC. +The ``imx8mp-evk`` and ``imx8mm-evk`` machine models the i.MX 8M Plus +and i.MX 8M Mini Evaluation Kits, based on i.MX 8M Plus and i.MX8M +Mini SoCs. Supported devices ----------------- -The ``imx8mp-evk`` machine implements the following devices: +The ``imx8mp-evk`` and ``imx8mm-evk`` machines implement the +following devices: * Up to 4 Cortex-A53 cores * Generic Interrupt Controller (GICv3) @@ -XXX,XX +XXX,XX @@ The ``imx8mp-evk`` machine implements the following devices: Boot options ------------ -The ``imx8mp-evk`` machine can start a Linux kernel directly using the standard -``-kernel`` functionality. +The ``imx8mp-evk`` and ``imx8mm-evk`` machines can start a Linux +kernel directly using the standard ``-kernel`` functionality. Direct Linux Kernel Boot '''''''''''''''''''''''' @@ -XXX,XX +XXX,XX @@ is to generate an image with Buildroot. Version 2024.11.1 is tested at the time of writing and involves two steps. First run the following commands in the toplevel directory of the Buildroot source tree: +For i.MX 8M Plus EVK: + .. code-block:: bash $ make freescale_imx8mpevk_defconfig $ make +For i.MX 8M Mini EVK: + +.. code-block:: bash + + $ make freescale_imx8mmevk_defconfig + $ make + Once finished successfully there is an ``output/image`` subfolder. Navigate into it and resize the SD card image to a power of two: @@ -XXX,XX +XXX,XX @@ it and resize the SD card image to a power of two: Now that everything is prepared the machine can be started as follows: +For i.MX 8M Plus EVK: + .. code-block:: bash $ qemu-system-aarch64 -M imx8mp-evk \ @@ -XXX,XX +XXX,XX @@ Now that everything is prepared the machine can be started as follows: -append "root=/dev/mmcblk2p2" \ -drive file=sdcard.img,if=sd,bus=2,format=raw,id=mmcblk2 +For i.MX 8M Mini EVK: + +.. code-block:: bash + + $ qemu-system-aarch64 -M imx8mm-evk -smp 4 -m 2G \ + -display none -serial null -serial stdio \ + -kernel Image \ + -dtb imx8mm-evk.dtb \ + -append "root=/dev/mmcblk2p2" \ + -drive file=sdcard.img,if=sd,bus=2,format=raw,id=mmcblk2 KVM Acceleration ---------------- @@ -XXX,XX +XXX,XX @@ To enable hardware-assisted acceleration via KVM, append ``-accel kvm`` to the command line. While this speeds up performance significantly, be aware of the following limitations: -* The ``imx8mp-evk`` machine is not included under the "virtualization use case" - of :doc:`QEMU's security policy </system/security>`. This means that you - should not trust that it can contain malicious guests, whether it is run - using TCG or KVM. If you don't trust your guests and you're relying on QEMU to - be the security boundary, you want to choose another machine such as ``virt``. +* The ``imx8mp-evk`` and ``imx8mm-evk`` machines are not included + under the "virtualization use case" of :doc:`QEMU's security + policy </system/security>`. This means that you should not trust that + it can contain malicious guests, whether it is run using TCG or KVM. + If you don't trust your guests and you're relying on QEMU to be the + security boundary, you want to choose another machine such as + ``virt``. * Rather than Cortex-A53 CPUs, the same CPU type as the host's will be used. This is a limitation of KVM and may not work with guests with a tight dependency on Cortex-A53. diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/target-arm.rst +++ b/docs/system/target-arm.rst @@ -XXX,XX +XXX,XX @@ Board-specific documentation arm/imx25-pdk arm/mcimx6ul-evk arm/mcimx7d-sabre - arm/imx8mp-evk + arm/imx8m arm/orangepi arm/raspi arm/collie diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MP_EVK depends on TCG select FSL_IMX8MP +config FSL_IMX8MM + bool + select ARM_GIC + select IMX + +config FSL_IMX8MM_EVK + bool + default y + depends on AARCH64 + depends on TCG + select FSL_IMX8MM + config ARM_SMMUV3_ACCEL bool depends on ARM_SMMUV3 diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ +/* + * i.MX 8MM SoC Implementation + * + * Based on hw/arm/fsl-imx6.c + * + * Copyright (c) 2025, NXP Semiconductors + * Author: Gaurav Sharma <gaurav.sharma_7@nxp.com> + * + * SPDX-License-Identifier: GPL-2.0-or-later + * + * iMX8MM Reference Manual - https://www.nxp.com/products/i.MX8MMINI -> Documentation + */ + +#include "qemu/osdep.h" +#include "system/address-spaces.h" +#include "hw/arm/bsa.h" +#include "hw/arm/fsl-imx8mm.h" +#include "hw/misc/unimp.h" +#include "hw/core/boards.h" +#include "system/kvm.h" +#include "system/system.h" +#include "target/arm/cpu.h" +#include "target/arm/cpu-qom.h" +#include "target/arm/kvm_arm.h" +#include "qapi/error.h" +#include "qobject/qlist.h" + +static const struct { + hwaddr addr; + size_t size; + const char *name; +} fsl_imx8mm_memmap[] = { + [FSL_IMX8MM_RAM] = { FSL_IMX8MM_RAM_START, FSL_IMX8MM_RAM_SIZE_MAX, "ram" }, + [FSL_IMX8MM_DDR_PHY_BROADCAST] = { 0x3dc00000, 4 * MiB, "ddr_phy_broadcast" }, + [FSL_IMX8MM_DDR_PERF_MON] = { 0x3d800000, 4 * MiB, "ddr_perf_mon" }, + [FSL_IMX8MM_DDR_CTL] = { 0x3d400000, 4 * MiB, "ddr_ctl" }, + [FSL_IMX8MM_DDR_PHY] = { 0x3c000000, 16 * MiB, "ddr_phy" }, + [FSL_IMX8MM_GIC_DIST] = { 0x38800000, 512 * KiB, "gic_dist" }, + [FSL_IMX8MM_GIC_REDIST] = { 0x38880000, 512 * KiB, "gic_redist" }, + [FSL_IMX8MM_VPU] = { 0x38340000, 2 * MiB, "vpu" }, + [FSL_IMX8MM_VPU_BLK_CTRL] = { 0x38330000, 2 * MiB, "vpu_blk_ctrl" }, + [FSL_IMX8MM_VPU_G2_DECODER] = { 0x38310000, 1 * MiB, "vpu_g2_decoder" }, + [FSL_IMX8MM_VPU_G1_DECODER] = { 0x38300000, 1 * MiB, "vpu_g1_decoder" }, + [FSL_IMX8MM_USB2_OTG] = { 0x32e50200, 0x200, "usb2_otg" }, + [FSL_IMX8MM_USB2] = { 0x32e50000, 0x200, "usb2" }, + [FSL_IMX8MM_USB1_OTG] = { 0x32e40200, 0x200, "usb1_otg" }, + [FSL_IMX8MM_USB1] = { 0x32e40000, 0x200, "usb1" }, + [FSL_IMX8MM_GPU2D] = { 0x38000000, 64 * KiB, "gpu2d" }, + [FSL_IMX8MM_QSPI1_RX_BUFFER] = { 0x34000000, 32 * MiB, "qspi1_rx_buffer" }, + [FSL_IMX8MM_PCIE1] = { 0x33800000, 4 * MiB, "pcie1" }, + [FSL_IMX8MM_QSPI1_TX_BUFFER] = { 0x33008000, 32 * KiB, "qspi1_tx_buffer" }, + [FSL_IMX8MM_APBH_DMA] = { 0x33000000, 32 * KiB, "apbh_dma" }, + + /* AIPS-4 Begin */ + [FSL_IMX8MM_TZASC] = { 0x32f80000, 64 * KiB, "tzasc" }, + [FSL_IMX8MM_PCIE_PHY1] = { 0x32f00000, 64 * KiB, "pcie_phy1" }, + [FSL_IMX8MM_MEDIA_BLK_CTL] = { 0x32e28000, 256, "media_blk_ctl" }, + [FSL_IMX8MM_LCDIF] = { 0x32e00000, 64 * KiB, "lcdif" }, + [FSL_IMX8MM_MIPI_DSI] = { 0x32e10000, 64 * KiB, "mipi_dsi" }, + [FSL_IMX8MM_MIPI_CSI] = { 0x32e30000, 64 * KiB, "mipi_csi" }, + [FSL_IMX8MM_AIPS4_CONFIGURATION] = { 0x32df0000, 64 * KiB, "aips4_configuration" }, + /* AIPS-4 End */ + + [FSL_IMX8MM_INTERCONNECT] = { 0x32700000, 1 * MiB, "interconnect" }, + + /* AIPS-3 Begin */ + [FSL_IMX8MM_ENET1] = { 0x30be0000, 64 * KiB, "enet1" }, + [FSL_IMX8MM_SDMA1] = { 0x30bd0000, 64 * KiB, "sdma1" }, + [FSL_IMX8MM_QSPI] = { 0x30bb0000, 64 * KiB, "qspi" }, + [FSL_IMX8MM_USDHC3] = { 0x30b60000, 64 * KiB, "usdhc3" }, + [FSL_IMX8MM_USDHC2] = { 0x30b50000, 64 * KiB, "usdhc2" }, + [FSL_IMX8MM_USDHC1] = { 0x30b40000, 64 * KiB, "usdhc1" }, + [FSL_IMX8MM_SEMAPHORE_HS] = { 0x30ac0000, 64 * KiB, "semaphore_hs" }, + [FSL_IMX8MM_MU_B] = { 0x30ab0000, 64 * KiB, "mu_b" }, + [FSL_IMX8MM_MU_A] = { 0x30aa0000, 64 * KiB, "mu_a" }, + [FSL_IMX8MM_UART4] = { 0x30a60000, 64 * KiB, "uart4" }, + [FSL_IMX8MM_I2C4] = { 0x30a50000, 64 * KiB, "i2c4" }, + [FSL_IMX8MM_I2C3] = { 0x30a40000, 64 * KiB, "i2c3" }, + [FSL_IMX8MM_I2C2] = { 0x30a30000, 64 * KiB, "i2c2" }, + [FSL_IMX8MM_I2C1] = { 0x30a20000, 64 * KiB, "i2c1" }, + [FSL_IMX8MM_AIPS3_CONFIGURATION] = { 0x309f0000, 64 * KiB, "aips3_configuration" }, + [FSL_IMX8MM_CAAM] = { 0x30900000, 256 * KiB, "caam" }, + [FSL_IMX8MM_SPBA1] = { 0x308f0000, 64 * KiB, "spba1" }, + [FSL_IMX8MM_UART2] = { 0x30890000, 64 * KiB, "uart2" }, + [FSL_IMX8MM_UART3] = { 0x30880000, 64 * KiB, "uart3" }, + [FSL_IMX8MM_UART1] = { 0x30860000, 64 * KiB, "uart1" }, + [FSL_IMX8MM_ECSPI3] = { 0x30840000, 64 * KiB, "ecspi3" }, + [FSL_IMX8MM_ECSPI2] = { 0x30830000, 64 * KiB, "ecspi2" }, + [FSL_IMX8MM_ECSPI1] = { 0x30820000, 64 * KiB, "ecspi1" }, + /* AIPS-3 End */ + + /* AIPS-2 Begin */ + [FSL_IMX8MM_QOSC] = { 0x307f0000, 64 * KiB, "qosc" }, + [FSL_IMX8MM_PERFMON2] = { 0x307d0000, 64 * KiB, "perfmon2" }, + [FSL_IMX8MM_PERFMON1] = { 0x307c0000, 64 * KiB, "perfmon1" }, + [FSL_IMX8MM_GPT4] = { 0x30700000, 64 * KiB, "gpt4" }, + [FSL_IMX8MM_GPT5] = { 0x306f0000, 64 * KiB, "gpt5" }, + [FSL_IMX8MM_GPT6] = { 0x306e0000, 64 * KiB, "gpt6" }, + [FSL_IMX8MM_SYSCNT_CTRL] = { 0x306c0000, 64 * KiB, "syscnt_ctrl" }, + [FSL_IMX8MM_SYSCNT_CMP] = { 0x306b0000, 64 * KiB, "syscnt_cmp" }, + [FSL_IMX8MM_SYSCNT_RD] = { 0x306a0000, 64 * KiB, "syscnt_rd" }, + [FSL_IMX8MM_PWM4] = { 0x30690000, 64 * KiB, "pwm4" }, + [FSL_IMX8MM_PWM3] = { 0x30680000, 64 * KiB, "pwm3" }, + [FSL_IMX8MM_PWM2] = { 0x30670000, 64 * KiB, "pwm2" }, + [FSL_IMX8MM_PWM1] = { 0x30660000, 64 * KiB, "pwm1" }, + [FSL_IMX8MM_AIPS2_CONFIGURATION] = { 0x305f0000, 64 * KiB, "aips2_configuration" }, + /* AIPS-2 End */ + + /* AIPS-1 Begin */ + [FSL_IMX8MM_CSU] = { 0x303e0000, 64 * KiB, "csu" }, + [FSL_IMX8MM_RDC] = { 0x303d0000, 64 * KiB, "rdc" }, + [FSL_IMX8MM_SEMAPHORE2] = { 0x303c0000, 64 * KiB, "semaphore2" }, + [FSL_IMX8MM_SEMAPHORE1] = { 0x303b0000, 64 * KiB, "semaphore1" }, + [FSL_IMX8MM_GPC] = { 0x303a0000, 64 * KiB, "gpc" }, + [FSL_IMX8MM_SRC] = { 0x30390000, 64 * KiB, "src" }, + [FSL_IMX8MM_CCM] = { 0x30380000, 64 * KiB, "ccm" }, + [FSL_IMX8MM_SNVS_HP] = { 0x30370000, 64 * KiB, "snvs_hp" }, + [FSL_IMX8MM_ANA_PLL] = { 0x30360000, 64 * KiB, "ana_pll" }, + [FSL_IMX8MM_OCOTP_CTRL] = { 0x30350000, 64 * KiB, "ocotp_ctrl" }, + [FSL_IMX8MM_IOMUXC_GPR] = { 0x30340000, 64 * KiB, "iomuxc_gpr" }, + [FSL_IMX8MM_IOMUXC] = { 0x30330000, 64 * KiB, "iomuxc" }, + [FSL_IMX8MM_GPT3] = { 0x302f0000, 64 * KiB, "gpt3" }, + [FSL_IMX8MM_GPT2] = { 0x302e0000, 64 * KiB, "gpt2" }, + [FSL_IMX8MM_GPT1] = { 0x302d0000, 64 * KiB, "gpt1" }, + [FSL_IMX8MM_SDMA2] = { 0x302c0000, 64 * KiB, "sdma2" }, + [FSL_IMX8MM_SDMA3] = { 0x302b0000, 64 * KiB, "sdma3" }, + [FSL_IMX8MM_WDOG3] = { 0x302a0000, 64 * KiB, "wdog3" }, + [FSL_IMX8MM_WDOG2] = { 0x30290000, 64 * KiB, "wdog2" }, + [FSL_IMX8MM_WDOG1] = { 0x30280000, 64 * KiB, "wdog1" }, + [FSL_IMX8MM_ANA_OSC] = { 0x30270000, 64 * KiB, "ana_osc" }, + [FSL_IMX8MM_ANA_TSENSOR] = { 0x30260000, 64 * KiB, "ana_tsensor" }, + [FSL_IMX8MM_GPIO5] = { 0x30240000, 64 * KiB, "gpio5" }, + [FSL_IMX8MM_GPIO4] = { 0x30230000, 64 * KiB, "gpio4" }, + [FSL_IMX8MM_GPIO3] = { 0x30220000, 64 * KiB, "gpio3" }, + [FSL_IMX8MM_GPIO2] = { 0x30210000, 64 * KiB, "gpio2" }, + [FSL_IMX8MM_GPIO1] = { 0x30200000, 64 * KiB, "gpio1" }, + [FSL_IMX8MM_AIPS1_CONFIGURATION] = { 0x301f0000, 64 * KiB, "aips1_configuration" }, + [FSL_IMX8MM_SAI6] = { 0x30060000, 64 * KiB, "sai6" }, + [FSL_IMX8MM_SAI5] = { 0x30050000, 64 * KiB, "sai5" }, + [FSL_IMX8MM_SAI3] = { 0x30030000, 64 * KiB, "sai3" }, + [FSL_IMX8MM_SAI2] = { 0x30020000, 64 * KiB, "sai2" }, + [FSL_IMX8MM_SAI1] = { 0x30010000, 64 * KiB, "sai1" }, + + /* AIPS-1 End */ + + [FSL_IMX8MM_A53_DAP] = { 0x28000000, 16 * MiB, "a53_dap" }, + [FSL_IMX8MM_PCIE1_MEM] = { 0x18000000, 128 * MiB, "pcie1_mem" }, + [FSL_IMX8MM_QSPI_MEM] = { 0x08000000, 256 * MiB, "qspi_mem" }, + [FSL_IMX8MM_OCRAM] = { 0x00900000, 256 * KiB, "ocram" }, + [FSL_IMX8MM_TCM_DTCM] = { 0x00800000, 128 * KiB, "tcm_dtcm" }, + [FSL_IMX8MM_TCM_ITCM] = { 0x007e0000, 128 * KiB, "tcm_itcm" }, + [FSL_IMX8MM_OCRAM_S] = { 0x00180000, 32 * KiB, "ocram_s" }, + [FSL_IMX8MM_CAAM_MEM] = { 0x00100000, 32 * KiB, "caam_mem" }, + [FSL_IMX8MM_BOOT_ROM_PROTECTED] = { 0x0003f000, 4 * KiB, "boot_rom_protected" }, + [FSL_IMX8MM_BOOT_ROM] = { 0x00000000, 252 * KiB, "boot_rom" }, +}; + +static void fsl_imx8mm_init(Object *obj) +{ + MachineState *ms = MACHINE(qdev_get_machine()); + FslImx8mmState *s = FSL_IMX8MM(obj); + const char *cpu_type = ms->cpu_type ?: ARM_CPU_TYPE_NAME("cortex-a53"); + int i; + + for (i = 0; i < MIN(ms->smp.cpus, FSL_IMX8MM_NUM_CPUS); i++) { + g_autofree char *name = g_strdup_printf("cpu%d", i); + object_initialize_child(obj, name, &s->cpu[i], cpu_type); + } + + object_initialize_child(obj, "gic", &s->gic, gicv3_class_name()); + + for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) { + g_autofree char *name = g_strdup_printf("uart%d", i + 1); + object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); + } + +} + +static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) +{ + MachineState *ms = MACHINE(qdev_get_machine()); + FslImx8mmState *s = FSL_IMX8MM(dev); + DeviceState *gicdev = DEVICE(&s->gic); + int i; + + if (ms->smp.cpus > FSL_IMX8MM_NUM_CPUS) { + error_setg(errp, "%s: Only %d CPUs are supported (%d requested)", + TYPE_FSL_IMX8MM, FSL_IMX8MM_NUM_CPUS, ms->smp.cpus); + return; + } + + /* CPUs */ + for (i = 0; i < ms->smp.cpus; i++) { + /* On uniprocessor, the CBAR is set to 0 */ + if (ms->smp.cpus > 1 && + object_property_find(OBJECT(&s->cpu[i]), "reset-cbar")) { + object_property_set_int(OBJECT(&s->cpu[i]), "reset-cbar", + fsl_imx8mm_memmap[FSL_IMX8MM_GIC_DIST].addr, + &error_abort); + } + + /* + * CNTFID0 base frequency in Hz of system counter + */ + object_property_set_int(OBJECT(&s->cpu[i]), "cntfrq", 8000000, + &error_abort); + + if (object_property_find(OBJECT(&s->cpu[i]), "has_el2")) { + object_property_set_bool(OBJECT(&s->cpu[i]), "has_el2", + !kvm_enabled(), &error_abort); + } + + if (object_property_find(OBJECT(&s->cpu[i]), "has_el3")) { + object_property_set_bool(OBJECT(&s->cpu[i]), "has_el3", + !kvm_enabled(), &error_abort); + } + + if (i) { + /* + * Secondary CPUs start in powered-down state (and can be + * powered up via the SRC system reset controller) + */ + object_property_set_bool(OBJECT(&s->cpu[i]), "start-powered-off", + true, &error_abort); + } + + if (!qdev_realize(DEVICE(&s->cpu[i]), NULL, errp)) { + return; + } + } + + /* GIC */ + { + SysBusDevice *gicsbd = SYS_BUS_DEVICE(&s->gic); + QList *redist_region_count; + bool pmu = object_property_get_bool(OBJECT(first_cpu), "pmu", NULL); + + qdev_prop_set_uint32(gicdev, "num-cpu", ms->smp.cpus); + qdev_prop_set_uint32(gicdev, "num-irq", + FSL_IMX8MM_NUM_IRQS + GIC_INTERNAL); + redist_region_count = qlist_new(); + qlist_append_int(redist_region_count, ms->smp.cpus); + qdev_prop_set_array(gicdev, "redist-region-count", redist_region_count); + object_property_set_link(OBJECT(&s->gic), "sysmem", + OBJECT(get_system_memory()), &error_fatal); + if (!sysbus_realize(gicsbd, errp)) { + return; + } + sysbus_mmio_map(gicsbd, 0, fsl_imx8mm_memmap[FSL_IMX8MM_GIC_DIST].addr); + sysbus_mmio_map(gicsbd, 1, fsl_imx8mm_memmap[FSL_IMX8MM_GIC_REDIST].addr); + + /* + * Wire the outputs from each CPU's generic timer and the GICv3 + * maintenance interrupt signal to the appropriate GIC PPI inputs, and + * the GIC's IRQ/FIQ interrupt outputs to the CPU's inputs. + */ + for (i = 0; i < ms->smp.cpus; i++) { + DeviceState *cpudev = DEVICE(&s->cpu[i]); + int intidbase = FSL_IMX8MM_NUM_IRQS + i * GIC_INTERNAL; + qemu_irq irq; + + /* + * Mapping from the output timer irq lines from the CPU to the + * GIC PPI inputs. + */ + static const int timer_irqs[] = { + [GTIMER_PHYS] = ARCH_TIMER_NS_EL1_IRQ, + [GTIMER_VIRT] = ARCH_TIMER_VIRT_IRQ, + [GTIMER_HYP] = ARCH_TIMER_NS_EL2_IRQ, + [GTIMER_SEC] = ARCH_TIMER_S_EL1_IRQ, + }; + + for (int j = 0; j < ARRAY_SIZE(timer_irqs); j++) { + irq = qdev_get_gpio_in(gicdev, intidbase + timer_irqs[j]); + qdev_connect_gpio_out(cpudev, j, irq); + } + + irq = qdev_get_gpio_in(gicdev, intidbase + ARCH_GIC_MAINT_IRQ); + qdev_connect_gpio_out_named(cpudev, "gicv3-maintenance-interrupt", + 0, irq); + + irq = qdev_get_gpio_in(gicdev, intidbase + VIRTUAL_PMU_IRQ); + qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0, irq); + + sysbus_connect_irq(gicsbd, i, + qdev_get_gpio_in(cpudev, ARM_CPU_IRQ)); + sysbus_connect_irq(gicsbd, i + ms->smp.cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_FIQ)); + sysbus_connect_irq(gicsbd, i + 2 * ms->smp.cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_VIRQ)); + sysbus_connect_irq(gicsbd, i + 3 * ms->smp.cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ)); + + if (kvm_enabled()) { + if (pmu) { + assert(arm_feature(&s->cpu[i].env, ARM_FEATURE_PMU)); + if (kvm_irqchip_in_kernel()) { + kvm_arm_pmu_set_irq(&s->cpu[i], VIRTUAL_PMU_IRQ); + } + kvm_arm_pmu_init(&s->cpu[i]); + } + } + } + } + + /* UARTs */ + for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) { + static const struct { + hwaddr addr; + unsigned int irq; + } serial_table[FSL_IMX8MM_NUM_UARTS] = { + { fsl_imx8mm_memmap[FSL_IMX8MM_UART1].addr, FSL_IMX8MM_UART1_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_UART2].addr, FSL_IMX8MM_UART2_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_UART3].addr, FSL_IMX8MM_UART3_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_UART4].addr, FSL_IMX8MM_UART4_IRQ }, + }; + + qdev_prop_set_chr(DEVICE(&s->uart[i]), "chardev", serial_hd(i)); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->uart[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->uart[i]), 0, serial_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->uart[i]), 0, + qdev_get_gpio_in(gicdev, serial_table[i].irq)); + } + + /* On-Chip RAM */ + if (!memory_region_init_ram(&s->ocram, OBJECT(dev), "imx8mm.ocram", + fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].size, + errp)) { + return; + } + memory_region_add_subregion(get_system_memory(), + fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr, + &s->ocram); + + /* Unimplemented devices */ + for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) { + switch (i) { + case FSL_IMX8MM_GIC_DIST: + case FSL_IMX8MM_GIC_REDIST: + case FSL_IMX8MM_RAM: + case FSL_IMX8MM_OCRAM: + case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4: + /* device implemented and treated above */ + break; + + default: + create_unimplemented_device(fsl_imx8mm_memmap[i].name, + fsl_imx8mm_memmap[i].addr, + fsl_imx8mm_memmap[i].size); + break; + } + } +} + +static void fsl_imx8mm_class_init(ObjectClass *oc, const void *data) +{ + DeviceClass *dc = DEVICE_CLASS(oc); + + dc->realize = fsl_imx8mm_realize; + + dc->desc = "i.MX 8MM SoC"; +} + +static const TypeInfo fsl_imx8mm_types[] = { + { + .name = TYPE_FSL_IMX8MM, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(FslImx8mmState), + .instance_init = fsl_imx8mm_init, + .class_init = fsl_imx8mm_class_init, + }, +}; + +DEFINE_TYPES(fsl_imx8mm_types) diff --git a/hw/arm/imx8mm-evk.c b/hw/arm/imx8mm-evk.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/imx8mm-evk.c @@ -XXX,XX +XXX,XX @@ +/* + * NXP i.MX 8MM Evaluation Kit System Emulation + * + * Copyright (c) 2025, NXP Semiconductors + * Author: Gaurav Sharma <gaurav.sharma_7@nxp.com> + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#include "qemu/osdep.h" +#include "system/address-spaces.h" +#include "hw/arm/boot.h" +#include "hw/arm/fsl-imx8mm.h" +#include "hw/arm/machines-qom.h" +#include "hw/core/boards.h" +#include "hw/core/qdev-properties.h" +#include "system/kvm.h" +#include "system/qtest.h" +#include "qemu/error-report.h" +#include "qapi/error.h" +#include <libfdt.h> + +static void imx8mm_evk_modify_dtb(const struct arm_boot_info *info, void *fdt) +{ + int i, offset; + + /* Temporarily disable following nodes until they are implemented */ + const char *nodes_to_remove[] = { + "nxp,imx8mm-fspi", + "fsl,imx8mm-mipi-csi", + "fsl,imx8mm-mipi-dsim" + }; + + for (i = 0; i < ARRAY_SIZE(nodes_to_remove); i++) { + const char *dev_str = nodes_to_remove[i]; + + offset = fdt_node_offset_by_compatible(fdt, -1, dev_str); + while (offset >= 0) { + fdt_nop_node(fdt, offset); + offset = fdt_node_offset_by_compatible(fdt, offset, dev_str); + } + } + + /* Remove cpu-idle-states property from CPU nodes */ + offset = fdt_node_offset_by_compatible(fdt, -1, "arm,cortex-a53"); + while (offset >= 0) { + fdt_nop_property(fdt, offset, "cpu-idle-states"); + offset = fdt_node_offset_by_compatible(fdt, offset, "arm,cortex-a53"); + } + + if (kvm_enabled()) { + /* Use system counter frequency from host CPU to fix time in guest */ + offset = fdt_node_offset_by_compatible(fdt, -1, "arm,armv8-timer"); + while (offset >= 0) { + fdt_nop_property(fdt, offset, "clock-frequency"); + offset = fdt_node_offset_by_compatible(fdt, offset, "arm,armv8-timer"); + } + } +} + +static void imx8mm_evk_init(MachineState *machine) +{ + static struct arm_boot_info boot_info; + FslImx8mmState *s; + + if (machine->ram_size > FSL_IMX8MM_RAM_SIZE_MAX) { + error_report("RAM size " RAM_ADDR_FMT " above max supported (%08" PRIx64 ")", + machine->ram_size, FSL_IMX8MM_RAM_SIZE_MAX); + exit(1); + } + + boot_info = (struct arm_boot_info) { + .loader_start = FSL_IMX8MM_RAM_START, + .board_id = -1, + .ram_size = machine->ram_size, + .psci_conduit = QEMU_PSCI_CONDUIT_SMC, + .modify_dtb = imx8mm_evk_modify_dtb, + }; + + s = FSL_IMX8MM(object_new_with_props(TYPE_FSL_IMX8MM, OBJECT(machine), + "soc", &error_fatal, NULL)); + sysbus_realize_and_unref(SYS_BUS_DEVICE(s), &error_fatal); + + memory_region_add_subregion(get_system_memory(), FSL_IMX8MM_RAM_START, + machine->ram); + + if (!qtest_enabled()) { + arm_load_kernel(&s->cpu[0], machine, &boot_info); + } +} + +static const char *imx8mm_evk_get_default_cpu_type(const MachineState *ms) +{ + if (kvm_enabled()) { + return ARM_CPU_TYPE_NAME("host"); + } + + return ARM_CPU_TYPE_NAME("cortex-a53"); +} + +static void imx8mm_evk_machine_init(MachineClass *mc) +{ + mc->desc = "NXP i.MX 8MM EVK Board"; + mc->init = imx8mm_evk_init; + mc->max_cpus = FSL_IMX8MM_NUM_CPUS; + mc->default_cpus = FSL_IMX8MM_NUM_CPUS; + mc->default_ram_size = 2 * GiB; + mc->default_ram_id = "imx8mm-evk.ram"; + mc->get_default_cpu_type = imx8mm_evk_get_default_cpu_type; +} + +DEFINE_MACHINE_AARCH64("imx8mm-evk", imx8mm_evk_machine_init) diff --git a/hw/arm/meson.build b/hw/arm/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/meson.build +++ b/hw/arm/meson.build @@ -XXX,XX +XXX,XX @@ arm_common_ss.add(when: 'CONFIG_ARMSSE', if_true: files('armsse.c')) arm_common_ss.add(when: 'CONFIG_FSL_IMX7', if_true: files('fsl-imx7.c', 'mcimx7d-sabre.c')) arm_common_ss.add(when: 'CONFIG_FSL_IMX8MP', if_true: files('fsl-imx8mp.c')) arm_common_ss.add(when: 'CONFIG_FSL_IMX8MP_EVK', if_true: files('imx8mp-evk.c')) +arm_common_ss.add(when: 'CONFIG_FSL_IMX8MM', if_true: files('fsl-imx8mm.c')) +arm_common_ss.add(when: 'CONFIG_FSL_IMX8MM_EVK', if_true: files('imx8mm-evk.c')) arm_common_ss.add(when: 'CONFIG_ARM_SMMUV3', if_true: files('smmuv3.c')) arm_common_ss.add(when: 'CONFIG_ARM_SMMUV3_ACCEL', if_true: files('smmuv3-accel.c')) stub_ss.add(files('smmuv3-accel-stubs.c')) diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ +/* + * i.MX 8MM SoC Definitions + * + * Copyright (c) 2025, NXP Semiconductors + * Author: Gaurav Sharma <gaurav.sharma_7@nxp.com> + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#ifndef FSL_IMX8MM_H +#define FSL_IMX8MM_H + +#include "cpu.h" +#include "hw/char/imx_serial.h" +#include "hw/intc/arm_gicv3_common.h" +#include "qom/object.h" +#include "qemu/units.h" + +#define TYPE_FSL_IMX8MM "fsl-imx8mm" +OBJECT_DECLARE_SIMPLE_TYPE(FslImx8mmState, FSL_IMX8MM) + +#define FSL_IMX8MM_RAM_START 0x40000000 +#define FSL_IMX8MM_RAM_SIZE_MAX (4 * GiB) + +enum FslImx8mmConfiguration { + FSL_IMX8MM_NUM_CPUS = 4, + FSL_IMX8MM_NUM_IRQS = 128, + FSL_IMX8MM_NUM_UARTS = 4, +}; + +struct FslImx8mmState { + SysBusDevice parent_obj; + + ARMCPU cpu[FSL_IMX8MM_NUM_CPUS]; + GICv3State gic; + IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; + MemoryRegion ocram; +}; + +enum FslImx8mmMemoryRegions { + FSL_IMX8MM_A53_DAP, + FSL_IMX8MM_AIPS1_CONFIGURATION, + FSL_IMX8MM_AIPS2_CONFIGURATION, + FSL_IMX8MM_AIPS3_CONFIGURATION, + FSL_IMX8MM_AIPS4_CONFIGURATION, + FSL_IMX8MM_ANA_OSC, + FSL_IMX8MM_ANA_PLL, + FSL_IMX8MM_ANA_TSENSOR, + FSL_IMX8MM_APBH_DMA, + FSL_IMX8MM_BOOT_ROM, + FSL_IMX8MM_BOOT_ROM_PROTECTED, + FSL_IMX8MM_CAAM, + FSL_IMX8MM_CAAM_MEM, + FSL_IMX8MM_CCM, + FSL_IMX8MM_CSU, + FSL_IMX8MM_DDR_CTL, + FSL_IMX8MM_DDR_PERF_MON, + FSL_IMX8MM_DDR_PHY, + FSL_IMX8MM_DDR_PHY_BROADCAST, + FSL_IMX8MM_ECSPI1, + FSL_IMX8MM_ECSPI2, + FSL_IMX8MM_ECSPI3, + FSL_IMX8MM_ENET1, + FSL_IMX8MM_GIC_DIST, + FSL_IMX8MM_GIC_REDIST, + FSL_IMX8MM_GPC, + FSL_IMX8MM_GPIO1, + FSL_IMX8MM_GPIO2, + FSL_IMX8MM_GPIO3, + FSL_IMX8MM_GPIO4, + FSL_IMX8MM_GPIO5, + FSL_IMX8MM_GPT1, + FSL_IMX8MM_GPT2, + FSL_IMX8MM_GPT3, + FSL_IMX8MM_GPT4, + FSL_IMX8MM_GPT5, + FSL_IMX8MM_GPT6, + FSL_IMX8MM_GPU2D, + FSL_IMX8MM_I2C1, + FSL_IMX8MM_I2C2, + FSL_IMX8MM_I2C3, + FSL_IMX8MM_I2C4, + FSL_IMX8MM_INTERCONNECT, + FSL_IMX8MM_IOMUXC, + FSL_IMX8MM_IOMUXC_GPR, + FSL_IMX8MM_MEDIA_BLK_CTL, + FSL_IMX8MM_LCDIF, + FSL_IMX8MM_MIPI_CSI, + FSL_IMX8MM_MIPI_DSI, + FSL_IMX8MM_MU_A, + FSL_IMX8MM_MU_B, + FSL_IMX8MM_OCOTP_CTRL, + FSL_IMX8MM_OCRAM, + FSL_IMX8MM_OCRAM_S, + FSL_IMX8MM_PCIE1, + FSL_IMX8MM_PCIE1_MEM, + FSL_IMX8MM_PCIE_PHY1, + FSL_IMX8MM_PERFMON1, + FSL_IMX8MM_PERFMON2, + FSL_IMX8MM_PWM1, + FSL_IMX8MM_PWM2, + FSL_IMX8MM_PWM3, + FSL_IMX8MM_PWM4, + FSL_IMX8MM_QOSC, + FSL_IMX8MM_QSPI, + FSL_IMX8MM_QSPI1_RX_BUFFER, + FSL_IMX8MM_QSPI1_TX_BUFFER, + FSL_IMX8MM_QSPI_MEM, + FSL_IMX8MM_RAM, + FSL_IMX8MM_RDC, + FSL_IMX8MM_SAI1, + FSL_IMX8MM_SAI2, + FSL_IMX8MM_SAI3, + FSL_IMX8MM_SAI5, + FSL_IMX8MM_SAI6, + FSL_IMX8MM_SDMA1, + FSL_IMX8MM_SDMA2, + FSL_IMX8MM_SDMA3, + FSL_IMX8MM_SEMAPHORE1, + FSL_IMX8MM_SEMAPHORE2, + FSL_IMX8MM_SEMAPHORE_HS, + FSL_IMX8MM_SNVS_HP, + FSL_IMX8MM_SPBA1, + FSL_IMX8MM_SRC, + FSL_IMX8MM_SYSCNT_CMP, + FSL_IMX8MM_SYSCNT_CTRL, + FSL_IMX8MM_SYSCNT_RD, + FSL_IMX8MM_TCM_DTCM, + FSL_IMX8MM_TCM_ITCM, + FSL_IMX8MM_TZASC, + FSL_IMX8MM_UART1, + FSL_IMX8MM_UART2, + FSL_IMX8MM_UART3, + FSL_IMX8MM_UART4, + FSL_IMX8MM_USB1, + FSL_IMX8MM_USB2, + FSL_IMX8MM_USB1_OTG, + FSL_IMX8MM_USB2_OTG, + FSL_IMX8MM_USDHC1, + FSL_IMX8MM_USDHC2, + FSL_IMX8MM_USDHC3, + FSL_IMX8MM_VPU, + FSL_IMX8MM_VPU_BLK_CTRL, + FSL_IMX8MM_VPU_G1_DECODER, + FSL_IMX8MM_VPU_G2_DECODER, + FSL_IMX8MM_WDOG1, + FSL_IMX8MM_WDOG2, + FSL_IMX8MM_WDOG3, +}; + +enum FslImx8mmIrqs { + FSL_IMX8MM_UART1_IRQ = 26, + FSL_IMX8MM_UART2_IRQ = 27, + FSL_IMX8MM_UART3_IRQ = 28, + FSL_IMX8MM_UART4_IRQ = 29, +}; + +#endif /* FSL_IMX8MM_H */ -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> Add configurable properties for register reset values that differ between i.MX 8M variants (Plus, Mini, etc.). This allows the same device implementation to be shared across multiple SoCs. Properties added: - arm-pll-fdiv-ctl0-reset: ARM PLL divider control reset value Default value is set to match i.MX 8MP reset value (0x000FA031). This can be overridden in the variant like iMX8MM with its own reset value. Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/imx8mp_analog.c | 12 +++++++++++- include/hw/misc/imx8mp_analog.h | 3 +++ 2 files changed, 14 insertions(+), 1 deletion(-) diff --git a/hw/misc/imx8mp_analog.c b/hw/misc/imx8mp_analog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/imx8mp_analog.c +++ b/hw/misc/imx8mp_analog.c @@ -XXX,XX +XXX,XX @@ #include "qemu/log.h" #include "hw/misc/imx8mp_analog.h" +#include "hw/core/qdev-properties.h" #include "migration/vmstate.h" #define ANALOG_PLL_LOCK BIT(31) @@ -XXX,XX +XXX,XX @@ static void imx8mp_analog_reset(DeviceState *dev) s->analog[ANALOG_VPU_PLL_LOCKD_CTRL] = 0x0010003f; s->analog[ANALOG_VPU_PLL_MNIT_CTRL] = 0x00280081; s->analog[ANALOG_ARM_PLL_GEN_CTRL] = 0x00000810; - s->analog[ANALOG_ARM_PLL_FDIV_CTL0] = 0x000fa031; + + /* Use property value instead of hardcoded */ + s->analog[ANALOG_ARM_PLL_FDIV_CTL0] = s->arm_pll_fdiv_ctl0_reset; + s->analog[ANALOG_ARM_PLL_LOCKD_CTRL] = 0x0010003f; s->analog[ANALOG_ARM_PLL_MNIT_CTRL] = 0x00280081; s->analog[ANALOG_SYS_PLL1_GEN_CTRL] = 0x0aaaa810; @@ -XXX,XX +XXX,XX @@ static const VMStateDescription imx8mp_analog_vmstate = { }, }; +static const Property imx8mp_analog_properties[] = { + DEFINE_PROP_UINT32("arm-pll-fdiv-ctl0-reset", IMX8MPAnalogState, + arm_pll_fdiv_ctl0_reset, 0x000fa031), /* imx8mp default */ +}; + static void imx8mp_analog_class_init(ObjectClass *klass, const void *data) { DeviceClass *dc = DEVICE_CLASS(klass); device_class_set_legacy_reset(dc, imx8mp_analog_reset); + device_class_set_props(dc, imx8mp_analog_properties); dc->vmsd = &imx8mp_analog_vmstate; dc->desc = "i.MX 8M Plus Analog Module"; } diff --git a/include/hw/misc/imx8mp_analog.h b/include/hw/misc/imx8mp_analog.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/imx8mp_analog.h +++ b/include/hw/misc/imx8mp_analog.h @@ -XXX,XX +XXX,XX @@ struct IMX8MPAnalogState { } mmio; uint32_t analog[ANALOG_MAX]; + + /* Property for variant-specific reset values */ + uint32_t arm_pll_fdiv_ctl0_reset; }; #endif /* IMX8MP_ANALOG_H */ -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> Add the Analog IP to i.MX8MM SoC. iMX8MM and i.MX8MP uses the same Analog IP so the analog ip source will be shared. The ARM PLL divider control register (arm-pll-fdiv-ctl0) has a different reset value on i.MX8MM (0x000fa030) compared to i.MX8MP (0x000fa031). So iMX8MM will be overriding this property with its own reset-value. Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx8mm.c | 12 ++++++++++++ include/hw/arm/fsl-imx8mm.h | 2 ++ 3 files changed, 15 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MP_EVK config FSL_IMX8MM bool select ARM_GIC + select FSL_IMX8MP_ANALOG select IMX config FSL_IMX8MM_EVK diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, "gic", &s->gic, gicv3_class_name()); + object_initialize_child(obj, "analog", &s->analog, TYPE_IMX8MP_ANALOG); + for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) { g_autofree char *name = g_strdup_printf("uart%d", i + 1); object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) } } + /* Analog */ + object_property_set_uint(OBJECT(&s->analog), "arm-pll-fdiv-ctl0-reset", + 0x000fa030, &error_abort); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->analog), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->analog), 0, + fsl_imx8mm_memmap[FSL_IMX8MM_ANA_PLL].addr); + /* UARTs */ for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) { static const struct { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) /* Unimplemented devices */ for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) { switch (i) { + case FSL_IMX8MM_ANA_PLL: case FSL_IMX8MM_GIC_DIST: case FSL_IMX8MM_GIC_REDIST: case FSL_IMX8MM_RAM: diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "hw/char/imx_serial.h" #include "hw/intc/arm_gicv3_common.h" +#include "hw/misc/imx8mp_analog.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { ARMCPU cpu[FSL_IMX8MM_NUM_CPUS]; GICv3State gic; + IMX8MPAnalogState analog; IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; }; -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> Add the Clock Control Module (CCM) device to i.MX8MM SoC. The CCM implementation is shared with i.MX8MP as the register layout is identical between the two variants.Hence iMX8MM will be using the source of iMX8MP CCM. Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx8mm.c | 10 ++++++++++ include/hw/arm/fsl-imx8mm.h | 2 ++ 3 files changed, 13 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM bool select ARM_GIC select FSL_IMX8MP_ANALOG + select FSL_IMX8MP_CCM select IMX config FSL_IMX8MM_EVK diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, "gic", &s->gic, gicv3_class_name()); + object_initialize_child(obj, "ccm", &s->ccm, TYPE_IMX8MP_CCM); + object_initialize_child(obj, "analog", &s->analog, TYPE_IMX8MP_ANALOG); for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) } } + /* CCM */ + if (!sysbus_realize(SYS_BUS_DEVICE(&s->ccm), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->ccm), 0, + fsl_imx8mm_memmap[FSL_IMX8MM_CCM].addr); + /* Analog */ object_property_set_uint(OBJECT(&s->analog), "arm-pll-fdiv-ctl0-reset", 0x000fa030, &error_abort); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) { switch (i) { case FSL_IMX8MM_ANA_PLL: + case FSL_IMX8MM_CCM: case FSL_IMX8MM_GIC_DIST: case FSL_IMX8MM_GIC_REDIST: case FSL_IMX8MM_RAM: diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/char/imx_serial.h" #include "hw/intc/arm_gicv3_common.h" #include "hw/misc/imx8mp_analog.h" +#include "hw/misc/imx8mp_ccm.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { ARMCPU cpu[FSL_IMX8MM_NUM_CPUS]; GICv3State gic; + IMX8MPCCMState ccm; IMX8MPAnalogState analog; IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> SNVS contains an RTC which allows Linux to deal correctly with time Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/fsl-imx8mm.c | 10 ++++++++++ include/hw/arm/fsl-imx8mm.h | 2 ++ 2 files changed, 12 insertions(+) diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, "analog", &s->analog, TYPE_IMX8MP_ANALOG); + object_initialize_child(obj, "snvs", &s->snvs, TYPE_IMX7_SNVS); + for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) { g_autofree char *name = g_strdup_printf("uart%d", i + 1); object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr, &s->ocram); + /* SNVS */ + if (!sysbus_realize(SYS_BUS_DEVICE(&s->snvs), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, + fsl_imx8mm_memmap[FSL_IMX8MM_SNVS_HP].addr); + /* Unimplemented devices */ for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) { switch (i) { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_GIC_REDIST: case FSL_IMX8MM_RAM: case FSL_IMX8MM_OCRAM: + case FSL_IMX8MM_SNVS_HP: case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4: /* device implemented and treated above */ break; diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "hw/char/imx_serial.h" #include "hw/intc/arm_gicv3_common.h" +#include "hw/misc/imx7_snvs.h" #include "hw/misc/imx8mp_analog.h" #include "hw/misc/imx8mp_ccm.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { GICv3State gic; IMX8MPCCMState ccm; IMX8MPAnalogState analog; + IMX7SNVSState snvs; IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; }; -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> It enables emulation of SD/MMC cards through a virtual SDHCI interface The emulated SDHCI controller allows guest OS to use emulated storage as a standard block device. This will allow running the images such as those generated by Buildroot. Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx8mm.c | 25 +++++++++++++++++++++++++ hw/arm/imx8mm-evk.c | 17 +++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 7 +++++++ 4 files changed, 50 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM select FSL_IMX8MP_ANALOG select FSL_IMX8MP_CCM select IMX + select SDHCI config FSL_IMX8MM_EVK bool diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); } + for (i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) { + g_autofree char *name = g_strdup_printf("usdhc%d", i + 1); + object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC); + } } static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr, &s->ocram); + /* USDHCs */ + for (i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) { + static const struct { + hwaddr addr; + unsigned int irq; + } usdhc_table[FSL_IMX8MM_NUM_USDHCS] = { + { fsl_imx8mm_memmap[FSL_IMX8MM_USDHC1].addr, FSL_IMX8MM_USDHC1_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_USDHC2].addr, FSL_IMX8MM_USDHC2_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_USDHC3].addr, FSL_IMX8MM_USDHC3_IRQ }, + }; + + if (!sysbus_realize(SYS_BUS_DEVICE(&s->usdhc[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->usdhc[i]), 0, usdhc_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->usdhc[i]), 0, + qdev_get_gpio_in(gicdev, usdhc_table[i].irq)); + } + /* SNVS */ if (!sysbus_realize(SYS_BUS_DEVICE(&s->snvs), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_OCRAM: case FSL_IMX8MM_SNVS_HP: case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4: + case FSL_IMX8MM_USDHC1 ... FSL_IMX8MM_USDHC3: /* device implemented and treated above */ break; diff --git a/hw/arm/imx8mm-evk.c b/hw/arm/imx8mm-evk.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/imx8mm-evk.c +++ b/hw/arm/imx8mm-evk.c @@ -XXX,XX +XXX,XX @@ static void imx8mm_evk_init(MachineState *machine) memory_region_add_subregion(get_system_memory(), FSL_IMX8MM_RAM_START, machine->ram); + for (int i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) { + BusState *bus; + DeviceState *carddev; + BlockBackend *blk; + DriveInfo *di = drive_get(IF_SD, i, 0); + + if (!di) { + continue; + } + + blk = blk_by_legacy_dinfo(di); + bus = qdev_get_child_bus(DEVICE(&s->usdhc[i]), "sd-bus"); + carddev = qdev_new(TYPE_SD_CARD); + qdev_prop_set_drive_err(carddev, "drive", blk, &error_fatal); + qdev_realize_and_unref(carddev, bus, &error_fatal); + } + if (!qtest_enabled()) { arm_load_kernel(&s->cpu[0], machine, &boot_info); } diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx8mp_analog.h" #include "hw/misc/imx8mp_ccm.h" +#include "hw/sd/sdhci.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ enum FslImx8mmConfiguration { FSL_IMX8MM_NUM_CPUS = 4, FSL_IMX8MM_NUM_IRQS = 128, FSL_IMX8MM_NUM_UARTS = 4, + FSL_IMX8MM_NUM_USDHCS = 3, }; struct FslImx8mmState { @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMX7SNVSState snvs; IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; + SDHCIState usdhc[FSL_IMX8MM_NUM_USDHCS]; }; enum FslImx8mmMemoryRegions { @@ -XXX,XX +XXX,XX @@ enum FslImx8mmMemoryRegions { }; enum FslImx8mmIrqs { + FSL_IMX8MM_USDHC1_IRQ = 22, + FSL_IMX8MM_USDHC2_IRQ = 23, + FSL_IMX8MM_USDHC3_IRQ = 24, + FSL_IMX8MM_UART1_IRQ = 26, FSL_IMX8MM_UART2_IRQ = 27, FSL_IMX8MM_UART3_IRQ = 28, -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> This enables support for Designware PCI Express Controller emulation It provides a controlled environment to debug the linux pci subsystem Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 3 +++ hw/arm/fsl-imx8mm.c | 30 ++++++++++++++++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 10 ++++++++++ 3 files changed, 43 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MP_EVK config FSL_IMX8MM bool + imply PCI_DEVICES select ARM_GIC select FSL_IMX8MP_ANALOG select FSL_IMX8MP_CCM select IMX select SDHCI + select PCI_EXPRESS_DESIGNWARE + select PCI_EXPRESS_FSL_IMX8M_PHY config FSL_IMX8MM_EVK bool diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) g_autofree char *name = g_strdup_printf("usdhc%d", i + 1); object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC); } + + object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST); + object_initialize_child(obj, "pcie_phy", &s->pcie_phy, + TYPE_FSL_IMX8M_PCIE_PHY); } static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, fsl_imx8mm_memmap[FSL_IMX8MM_SNVS_HP].addr); + /* PCIe */ + if (!sysbus_realize(SYS_BUS_DEVICE(&s->pcie), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->pcie), 0, + fsl_imx8mm_memmap[FSL_IMX8MM_PCIE1].addr); + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 0, + qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_INTA_IRQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 1, + qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_INTB_IRQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 2, + qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_INTC_IRQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 3, + qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_INTD_IRQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 4, + qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_MSI_IRQ)); + + if (!sysbus_realize(SYS_BUS_DEVICE(&s->pcie_phy), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->pcie_phy), 0, + fsl_imx8mm_memmap[FSL_IMX8MM_PCIE_PHY1].addr); + /* Unimplemented devices */ for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) { switch (i) { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_CCM: case FSL_IMX8MM_GIC_DIST: case FSL_IMX8MM_GIC_REDIST: + case FSL_IMX8MM_PCIE1: + case FSL_IMX8MM_PCIE_PHY1: case FSL_IMX8MM_RAM: case FSL_IMX8MM_OCRAM: case FSL_IMX8MM_SNVS_HP: diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx8mp_analog.h" #include "hw/misc/imx8mp_ccm.h" +#include "hw/pci-host/designware.h" +#include "hw/pci-host/fsl_imx8m_phy.h" #include "hw/sd/sdhci.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; SDHCIState usdhc[FSL_IMX8MM_NUM_USDHCS]; + DesignwarePCIEHost pcie; + FslImx8mPciePhyState pcie_phy; }; enum FslImx8mmMemoryRegions { @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_UART2_IRQ = 27, FSL_IMX8MM_UART3_IRQ = 28, FSL_IMX8MM_UART4_IRQ = 29, + + FSL_IMX8MM_PCI_INTA_IRQ = 122, + FSL_IMX8MM_PCI_INTB_IRQ = 123, + FSL_IMX8MM_PCI_INTC_IRQ = 124, + FSL_IMX8MM_PCI_INTD_IRQ = 125, + FSL_IMX8MM_PCI_MSI_IRQ = 127, }; #endif /* FSL_IMX8MM_H */ -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> Enabled GPIO controller emulation Also updated the GPIO IRQ lines of iMX8MM Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/fsl-imx8mm.c | 54 +++++++++++++++++++++++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 14 ++++++++++ 2 files changed, 68 insertions(+) diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); } + for (i = 0; i < FSL_IMX8MM_NUM_GPIOS; i++) { + g_autofree char *name = g_strdup_printf("gpio%d", i + 1); + object_initialize_child(obj, name, &s->gpio[i], TYPE_IMX_GPIO); + } + for (i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) { g_autofree char *name = g_strdup_printf("usdhc%d", i + 1); object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr, &s->ocram); + /* GPIOs */ + for (i = 0; i < FSL_IMX8MM_NUM_GPIOS; i++) { + static const struct { + hwaddr addr; + unsigned int irq_low; + unsigned int irq_high; + } gpio_table[FSL_IMX8MM_NUM_GPIOS] = { + { + fsl_imx8mm_memmap[FSL_IMX8MM_GPIO1].addr, + FSL_IMX8MM_GPIO1_LOW_IRQ, + FSL_IMX8MM_GPIO1_HIGH_IRQ + }, + { + fsl_imx8mm_memmap[FSL_IMX8MM_GPIO2].addr, + FSL_IMX8MM_GPIO2_LOW_IRQ, + FSL_IMX8MM_GPIO2_HIGH_IRQ + }, + { + fsl_imx8mm_memmap[FSL_IMX8MM_GPIO3].addr, + FSL_IMX8MM_GPIO3_LOW_IRQ, + FSL_IMX8MM_GPIO3_HIGH_IRQ + }, + { + fsl_imx8mm_memmap[FSL_IMX8MM_GPIO4].addr, + FSL_IMX8MM_GPIO4_LOW_IRQ, + FSL_IMX8MM_GPIO4_HIGH_IRQ + }, + { + fsl_imx8mm_memmap[FSL_IMX8MM_GPIO5].addr, + FSL_IMX8MM_GPIO5_LOW_IRQ, + FSL_IMX8MM_GPIO5_HIGH_IRQ + }, + }; + object_property_set_bool(OBJECT(&s->gpio[i]), "has-edge-sel", true, + &error_abort); + object_property_set_bool(OBJECT(&s->gpio[i]), "has-upper-pin-irq", + true, &error_abort); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpio[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio[i]), 0, gpio_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 0, + qdev_get_gpio_in(gicdev, gpio_table[i].irq_low)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 1, + qdev_get_gpio_in(gicdev, gpio_table[i].irq_high)); + } + /* USDHCs */ for (i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) { static const struct { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_CCM: case FSL_IMX8MM_GIC_DIST: case FSL_IMX8MM_GIC_REDIST: + case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5: case FSL_IMX8MM_PCIE1: case FSL_IMX8MM_PCIE_PHY1: case FSL_IMX8MM_RAM: diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "hw/char/imx_serial.h" +#include "hw/gpio/imx_gpio.h" #include "hw/intc/arm_gicv3_common.h" #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx8mp_analog.h" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(FslImx8mmState, FSL_IMX8MM) enum FslImx8mmConfiguration { FSL_IMX8MM_NUM_CPUS = 4, + FSL_IMX8MM_NUM_GPIOS = 5, FSL_IMX8MM_NUM_IRQS = 128, FSL_IMX8MM_NUM_UARTS = 4, FSL_IMX8MM_NUM_USDHCS = 3, @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { ARMCPU cpu[FSL_IMX8MM_NUM_CPUS]; GICv3State gic; + IMXGPIOState gpio[FSL_IMX8MM_NUM_GPIOS]; IMX8MPCCMState ccm; IMX8MPAnalogState analog; IMX7SNVSState snvs; @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_UART3_IRQ = 28, FSL_IMX8MM_UART4_IRQ = 29, + FSL_IMX8MM_GPIO1_LOW_IRQ = 64, + FSL_IMX8MM_GPIO1_HIGH_IRQ = 65, + FSL_IMX8MM_GPIO2_LOW_IRQ = 66, + FSL_IMX8MM_GPIO2_HIGH_IRQ = 67, + FSL_IMX8MM_GPIO3_LOW_IRQ = 68, + FSL_IMX8MM_GPIO3_HIGH_IRQ = 69, + FSL_IMX8MM_GPIO4_LOW_IRQ = 70, + FSL_IMX8MM_GPIO4_HIGH_IRQ = 71, + FSL_IMX8MM_GPIO5_LOW_IRQ = 72, + FSL_IMX8MM_GPIO5_HIGH_IRQ = 73, + FSL_IMX8MM_PCI_INTA_IRQ = 122, FSL_IMX8MM_PCI_INTB_IRQ = 123, FSL_IMX8MM_PCI_INTC_IRQ = 124, -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> This can be used to test and debug I2C device drivers. Added I2C interrupts Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 2 ++ hw/arm/fsl-imx8mm.c | 27 +++++++++++++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 8 ++++++++ 3 files changed, 37 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MP_EVK config FSL_IMX8MM bool imply PCI_DEVICES + imply I2C_DEVICES select ARM_GIC select FSL_IMX8MP_ANALOG select FSL_IMX8MP_CCM select IMX + select IMX_I2C select SDHCI select PCI_EXPRESS_DESIGNWARE select PCI_EXPRESS_FSL_IMX8M_PHY diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); } + for (i = 0; i < FSL_IMX8MM_NUM_I2CS; i++) { + g_autofree char *name = g_strdup_printf("i2c%d", i + 1); + object_initialize_child(obj, name, &s->i2c[i], TYPE_IMX_I2C); + } + for (i = 0; i < FSL_IMX8MM_NUM_GPIOS; i++) { g_autofree char *name = g_strdup_printf("gpio%d", i + 1); object_initialize_child(obj, name, &s->gpio[i], TYPE_IMX_GPIO); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr, &s->ocram); + /* I2Cs */ + for (i = 0; i < FSL_IMX8MM_NUM_I2CS; i++) { + static const struct { + hwaddr addr; + unsigned int irq; + } i2c_table[FSL_IMX8MM_NUM_I2CS] = { + { fsl_imx8mm_memmap[FSL_IMX8MM_I2C1].addr, FSL_IMX8MM_I2C1_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_I2C2].addr, FSL_IMX8MM_I2C2_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_I2C3].addr, FSL_IMX8MM_I2C3_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_I2C4].addr, FSL_IMX8MM_I2C4_IRQ }, + }; + + if (!sysbus_realize(SYS_BUS_DEVICE(&s->i2c[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c[i]), 0, i2c_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c[i]), 0, + qdev_get_gpio_in(gicdev, i2c_table[i].irq)); + } + /* GPIOs */ for (i = 0; i < FSL_IMX8MM_NUM_GPIOS; i++) { static const struct { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_GIC_DIST: case FSL_IMX8MM_GIC_REDIST: case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5: + case FSL_IMX8MM_I2C1 ... FSL_IMX8MM_I2C4: case FSL_IMX8MM_PCIE1: case FSL_IMX8MM_PCIE_PHY1: case FSL_IMX8MM_RAM: diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "hw/char/imx_serial.h" #include "hw/gpio/imx_gpio.h" +#include "hw/i2c/imx_i2c.h" #include "hw/intc/arm_gicv3_common.h" #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx8mp_analog.h" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(FslImx8mmState, FSL_IMX8MM) enum FslImx8mmConfiguration { FSL_IMX8MM_NUM_CPUS = 4, FSL_IMX8MM_NUM_GPIOS = 5, + FSL_IMX8MM_NUM_I2CS = 4, FSL_IMX8MM_NUM_IRQS = 128, FSL_IMX8MM_NUM_UARTS = 4, FSL_IMX8MM_NUM_USDHCS = 3, @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMX8MPCCMState ccm; IMX8MPAnalogState analog; IMX7SNVSState snvs; + IMXI2CState i2c[FSL_IMX8MM_NUM_I2CS]; IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; SDHCIState usdhc[FSL_IMX8MM_NUM_USDHCS]; @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_UART3_IRQ = 28, FSL_IMX8MM_UART4_IRQ = 29, + FSL_IMX8MM_I2C1_IRQ = 35, + FSL_IMX8MM_I2C2_IRQ = 36, + FSL_IMX8MM_I2C3_IRQ = 37, + FSL_IMX8MM_I2C4_IRQ = 38, + FSL_IMX8MM_GPIO1_LOW_IRQ = 64, FSL_IMX8MM_GPIO1_HIGH_IRQ = 65, FSL_IMX8MM_GPIO2_LOW_IRQ = 66, -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> It enables emulation of ECSPI in iMX8MM Added SPI IRQ lines Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/fsl-imx8mm.c | 26 ++++++++++++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 7 +++++++ 2 files changed, 33 insertions(+) diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC); } + for (i = 0; i < FSL_IMX8MM_NUM_ECSPIS; i++) { + g_autofree char *name = g_strdup_printf("spi%d", i + 1); + object_initialize_child(obj, name, &s->spi[i], TYPE_IMX_SPI); + } + object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST); object_initialize_child(obj, "pcie_phy", &s->pcie_phy, TYPE_FSL_IMX8M_PCIE_PHY); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) qdev_get_gpio_in(gicdev, usdhc_table[i].irq)); } + /* ECSPIs */ + for (i = 0; i < FSL_IMX8MM_NUM_ECSPIS; i++) { + static const struct { + hwaddr addr; + unsigned int irq; + } spi_table[FSL_IMX8MM_NUM_ECSPIS] = { + { fsl_imx8mm_memmap[FSL_IMX8MM_ECSPI1].addr, FSL_IMX8MM_ECSPI1_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_ECSPI2].addr, FSL_IMX8MM_ECSPI2_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_ECSPI3].addr, FSL_IMX8MM_ECSPI3_IRQ }, + }; + + if (!sysbus_realize(SYS_BUS_DEVICE(&s->spi[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0, spi_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0, + qdev_get_gpio_in(gicdev, spi_table[i].irq)); + } + /* SNVS */ if (!sysbus_realize(SYS_BUS_DEVICE(&s->snvs), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_GIC_DIST: case FSL_IMX8MM_GIC_REDIST: case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5: + case FSL_IMX8MM_ECSPI1 ... FSL_IMX8MM_ECSPI3: case FSL_IMX8MM_I2C1 ... FSL_IMX8MM_I2C4: case FSL_IMX8MM_PCIE1: case FSL_IMX8MM_PCIE_PHY1: diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/pci-host/designware.h" #include "hw/pci-host/fsl_imx8m_phy.h" #include "hw/sd/sdhci.h" +#include "hw/ssi/imx_spi.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(FslImx8mmState, FSL_IMX8MM) enum FslImx8mmConfiguration { FSL_IMX8MM_NUM_CPUS = 4, + FSL_IMX8MM_NUM_ECSPIS = 3, FSL_IMX8MM_NUM_GPIOS = 5, FSL_IMX8MM_NUM_I2CS = 4, FSL_IMX8MM_NUM_IRQS = 128, @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMX8MPCCMState ccm; IMX8MPAnalogState analog; IMX7SNVSState snvs; + IMXSPIState spi[FSL_IMX8MM_NUM_ECSPIS]; IMXI2CState i2c[FSL_IMX8MM_NUM_I2CS]; IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_UART3_IRQ = 28, FSL_IMX8MM_UART4_IRQ = 29, + FSL_IMX8MM_ECSPI1_IRQ = 31, + FSL_IMX8MM_ECSPI2_IRQ = 32, + FSL_IMX8MM_ECSPI3_IRQ = 33, + FSL_IMX8MM_I2C1_IRQ = 35, FSL_IMX8MM_I2C2_IRQ = 36, FSL_IMX8MM_I2C3_IRQ = 37, -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> It enables emulation of WDT in iMX8MM Added WDT IRQ lines Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx8mm.c | 28 ++++++++++++++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 7 +++++++ 3 files changed, 36 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM select SDHCI select PCI_EXPRESS_DESIGNWARE select PCI_EXPRESS_FSL_IMX8M_PHY + select WDT_IMX2 config FSL_IMX8MM_EVK bool diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->spi[i], TYPE_IMX_SPI); } + for (i = 0; i < FSL_IMX8MM_NUM_WDTS; i++) { + g_autofree char *name = g_strdup_printf("wdt%d", i); + object_initialize_child(obj, name, &s->wdt[i], TYPE_IMX2_WDT); + } + object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST); object_initialize_child(obj, "pcie_phy", &s->pcie_phy, TYPE_FSL_IMX8M_PCIE_PHY); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, fsl_imx8mm_memmap[FSL_IMX8MM_SNVS_HP].addr); + /* Watchdogs */ + for (i = 0; i < FSL_IMX8MM_NUM_WDTS; i++) { + static const struct { + hwaddr addr; + unsigned int irq; + } wdog_table[FSL_IMX8MM_NUM_WDTS] = { + { fsl_imx8mm_memmap[FSL_IMX8MM_WDOG1].addr, FSL_IMX8MM_WDOG1_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_WDOG2].addr, FSL_IMX8MM_WDOG2_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_WDOG3].addr, FSL_IMX8MM_WDOG3_IRQ }, + }; + + object_property_set_bool(OBJECT(&s->wdt[i]), "pretimeout-support", + true, &error_abort); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->wdt[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[i]), 0, wdog_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->wdt[i]), 0, + qdev_get_gpio_in(gicdev, wdog_table[i].irq)); + } + /* PCIe */ if (!sysbus_realize(SYS_BUS_DEVICE(&s->pcie), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_SNVS_HP: case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4: case FSL_IMX8MM_USDHC1 ... FSL_IMX8MM_USDHC3: + case FSL_IMX8MM_WDOG1 ... FSL_IMX8MM_WDOG3: /* device implemented and treated above */ break; diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/pci-host/fsl_imx8m_phy.h" #include "hw/sd/sdhci.h" #include "hw/ssi/imx_spi.h" +#include "hw/watchdog/wdt_imx2.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ enum FslImx8mmConfiguration { FSL_IMX8MM_NUM_IRQS = 128, FSL_IMX8MM_NUM_UARTS = 4, FSL_IMX8MM_NUM_USDHCS = 3, + FSL_IMX8MM_NUM_WDTS = 3, }; struct FslImx8mmState { @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; SDHCIState usdhc[FSL_IMX8MM_NUM_USDHCS]; + IMX2WdtState wdt[FSL_IMX8MM_NUM_WDTS]; DesignwarePCIEHost pcie; FslImx8mPciePhyState pcie_phy; }; @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_GPIO5_LOW_IRQ = 72, FSL_IMX8MM_GPIO5_HIGH_IRQ = 73, + FSL_IMX8MM_WDOG1_IRQ = 78, + FSL_IMX8MM_WDOG2_IRQ = 79, + FSL_IMX8MM_WDOG3_IRQ = 10, + FSL_IMX8MM_PCI_INTA_IRQ = 122, FSL_IMX8MM_PCI_INTB_IRQ = 123, FSL_IMX8MM_PCI_INTC_IRQ = 124, -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> It enables emulation of GPT in iMX8MM Added GPT IRQ lines Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx8mm.c | 54 +++++++++++++++++++++++++++++++++++++ hw/timer/imx_gpt.c | 26 ++++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 11 ++++++++ include/hw/timer/imx_gpt.h | 2 ++ 5 files changed, 94 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM select FSL_IMX8MP_CCM select IMX select IMX_I2C + select OR_IRQ select SDHCI select PCI_EXPRESS_DESIGNWARE select PCI_EXPRESS_FSL_IMX8M_PHY diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); } + for (i = 0; i < FSL_IMX8MM_NUM_GPTS; i++) { + g_autofree char *name = g_strdup_printf("gpt%d", i + 1); + object_initialize_child(obj, name, &s->gpt[i], TYPE_IMX8MM_GPT); + } + object_initialize_child(obj, "gpt5-gpt6-irq", &s->gpt5_gpt6_irq, + TYPE_OR_IRQ); + for (i = 0; i < FSL_IMX8MM_NUM_I2CS; i++) { g_autofree char *name = g_strdup_printf("i2c%d", i + 1); object_initialize_child(obj, name, &s->i2c[i], TYPE_IMX_I2C); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr, &s->ocram); + /* GPTs */ + object_property_set_int(OBJECT(&s->gpt5_gpt6_irq), "num-lines", 2, + &error_abort); + if (!qdev_realize(DEVICE(&s->gpt5_gpt6_irq), NULL, errp)) { + return; + } + + qdev_connect_gpio_out(DEVICE(&s->gpt5_gpt6_irq), 0, + qdev_get_gpio_in(gicdev, FSL_IMX8MM_GPT5_GPT6_IRQ)); + + for (i = 0; i < FSL_IMX8MM_NUM_GPTS; i++) { + hwaddr gpt_addrs[FSL_IMX8MM_NUM_GPTS] = { + fsl_imx8mm_memmap[FSL_IMX8MM_GPT1].addr, + fsl_imx8mm_memmap[FSL_IMX8MM_GPT2].addr, + fsl_imx8mm_memmap[FSL_IMX8MM_GPT3].addr, + fsl_imx8mm_memmap[FSL_IMX8MM_GPT4].addr, + fsl_imx8mm_memmap[FSL_IMX8MM_GPT5].addr, + fsl_imx8mm_memmap[FSL_IMX8MM_GPT6].addr, + }; + + s->gpt[i].ccm = IMX_CCM(&s->ccm); + + if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpt[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpt[i]), 0, gpt_addrs[i]); + + if (i < FSL_IMX8MM_NUM_GPTS - 2) { + static const unsigned int gpt_irqs[FSL_IMX8MM_NUM_GPTS - 2] = { + FSL_IMX8MM_GPT1_IRQ, + FSL_IMX8MM_GPT2_IRQ, + FSL_IMX8MM_GPT3_IRQ, + FSL_IMX8MM_GPT4_IRQ, + }; + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpt[i]), 0, + qdev_get_gpio_in(gicdev, gpt_irqs[i])); + } else { + int irq = i - FSL_IMX8MM_NUM_GPTS + 2; + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpt[i]), 0, + qdev_get_gpio_in(DEVICE(&s->gpt5_gpt6_irq), irq)); + } + } + /* I2Cs */ for (i = 0; i < FSL_IMX8MM_NUM_I2CS; i++) { static const struct { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_GIC_DIST: case FSL_IMX8MM_GIC_REDIST: case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5: + case FSL_IMX8MM_GPT1 ... FSL_IMX8MM_GPT6: case FSL_IMX8MM_ECSPI1 ... FSL_IMX8MM_ECSPI3: case FSL_IMX8MM_I2C1 ... FSL_IMX8MM_I2C4: case FSL_IMX8MM_PCIE1: diff --git a/hw/timer/imx_gpt.c b/hw/timer/imx_gpt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/imx_gpt.c +++ b/hw/timer/imx_gpt.c @@ -XXX,XX +XXX,XX @@ * Originally written by Hans Jiang * Updated by Peter Chubb * Updated by Jean-Christophe Dubois <jcd@tribudubois.net> + * Updated by Gaurav Sharma <gaurav.sharma_7@nxp.com> * * This code is licensed under GPL version 2 or later. See * the COPYING file in the top-level directory. @@ -XXX,XX +XXX,XX @@ static const IMXClk imx8mp_gpt_clocks[] = { CLK_NONE, /* 111 not defined */ }; +static const IMXClk imx8mm_gpt_clocks[] = { + CLK_NONE, /* 000 No clock source */ + CLK_IPG, /* 001 ipg_clk, 532MHz */ + CLK_IPG_HIGH, /* 010 ipg_clk_highfreq */ + CLK_EXT, /* 011 External clock */ + CLK_32k, /* 100 ipg_clk_32k */ + CLK_HIGH, /* 101 ipg_clk_16M */ + CLK_NONE, /* 110 not defined */ + CLK_NONE, /* 111 not defined */ +}; + /* Must be called from within ptimer_transaction_begin/commit block */ static void imx_gpt_set_freq(IMXGPTState *s) { @@ -XXX,XX +XXX,XX @@ static void imx8mp_gpt_init(Object *obj) s->clocks = imx8mp_gpt_clocks; } +static void imx8mm_gpt_init(Object *obj) +{ + IMXGPTState *s = IMX_GPT(obj); + + s->clocks = imx8mm_gpt_clocks; +} + static const TypeInfo imx25_gpt_info = { .name = TYPE_IMX25_GPT, .parent = TYPE_SYS_BUS_DEVICE, @@ -XXX,XX +XXX,XX @@ static const TypeInfo imx8mp_gpt_info = { .instance_init = imx8mp_gpt_init, }; +static const TypeInfo imx8mm_gpt_info = { + .name = TYPE_IMX8MM_GPT, + .parent = TYPE_IMX25_GPT, + .instance_init = imx8mm_gpt_init, +}; + static void imx_gpt_register_types(void) { type_register_static(&imx25_gpt_info); @@ -XXX,XX +XXX,XX @@ static void imx_gpt_register_types(void) type_register_static(&imx6ul_gpt_info); type_register_static(&imx7_gpt_info); type_register_static(&imx8mp_gpt_info); + type_register_static(&imx8mm_gpt_info); } type_init(imx_gpt_register_types) diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx8mp_analog.h" #include "hw/misc/imx8mp_ccm.h" +#include "hw/or-irq.h" #include "hw/pci-host/designware.h" #include "hw/pci-host/fsl_imx8m_phy.h" #include "hw/sd/sdhci.h" #include "hw/ssi/imx_spi.h" +#include "hw/timer/imx_gpt.h" #include "hw/watchdog/wdt_imx2.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ enum FslImx8mmConfiguration { FSL_IMX8MM_NUM_CPUS = 4, FSL_IMX8MM_NUM_ECSPIS = 3, FSL_IMX8MM_NUM_GPIOS = 5, + FSL_IMX8MM_NUM_GPTS = 6, FSL_IMX8MM_NUM_I2CS = 4, FSL_IMX8MM_NUM_IRQS = 128, FSL_IMX8MM_NUM_UARTS = 4, @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { ARMCPU cpu[FSL_IMX8MM_NUM_CPUS]; GICv3State gic; + IMXGPTState gpt[FSL_IMX8MM_NUM_GPTS]; IMXGPIOState gpio[FSL_IMX8MM_NUM_GPIOS]; IMX8MPCCMState ccm; IMX8MPAnalogState analog; @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMX2WdtState wdt[FSL_IMX8MM_NUM_WDTS]; DesignwarePCIEHost pcie; FslImx8mPciePhyState pcie_phy; + OrIRQState gpt5_gpt6_irq; }; enum FslImx8mmMemoryRegions { @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_I2C3_IRQ = 37, FSL_IMX8MM_I2C4_IRQ = 38, + FSL_IMX8MM_GPT1_IRQ = 55, + FSL_IMX8MM_GPT2_IRQ = 54, + FSL_IMX8MM_GPT3_IRQ = 53, + FSL_IMX8MM_GPT4_IRQ = 52, + FSL_IMX8MM_GPT5_GPT6_IRQ = 51, + FSL_IMX8MM_GPIO1_LOW_IRQ = 64, FSL_IMX8MM_GPIO1_HIGH_IRQ = 65, FSL_IMX8MM_GPIO2_LOW_IRQ = 66, diff --git a/include/hw/timer/imx_gpt.h b/include/hw/timer/imx_gpt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/imx_gpt.h +++ b/include/hw/timer/imx_gpt.h @@ -XXX,XX +XXX,XX @@ * Originally written by Hans Jiang * Updated by Peter Chubb * Updated by Jean-Christophe Dubois <jcd@tribudubois.net> + * Updated by Gaurav Sharma <gaurav.sharma_7@nxp.com> * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal @@ -XXX,XX +XXX,XX @@ #define TYPE_IMX6UL_GPT "imx6ul.gpt" #define TYPE_IMX7_GPT "imx7.gpt" #define TYPE_IMX8MP_GPT "imx8mp.gpt" +#define TYPE_IMX8MM_GPT "imx8mm.gpt" #define TYPE_IMX_GPT TYPE_IMX25_GPT -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> It enables emulation of ENET ethernet controller in iMX8MM Enables testing and debugging of network dependent drivers Added ENET MAC IRQ lines Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx8mm.c | 24 ++++++++++++++++++++++++ hw/arm/imx8mm-evk.c | 1 + include/hw/arm/fsl-imx8mm.h | 10 +++++++++- 4 files changed, 35 insertions(+), 1 deletion(-) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM select FSL_IMX8MP_ANALOG select FSL_IMX8MP_CCM select IMX + select IMX_FEC select IMX_I2C select OR_IRQ select SDHCI diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->wdt[i], TYPE_IMX2_WDT); } + object_initialize_child(obj, "eth0", &s->enet, TYPE_IMX_ENET); + object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST); object_initialize_child(obj, "pcie_phy", &s->pcie_phy, TYPE_FSL_IMX8M_PCIE_PHY); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) qdev_get_gpio_in(gicdev, spi_table[i].irq)); } + /* ENET1 */ + object_property_set_uint(OBJECT(&s->enet), "phy-num", s->phy_num, + &error_abort); + object_property_set_uint(OBJECT(&s->enet), "tx-ring-num", 3, &error_abort); + qemu_configure_nic_device(DEVICE(&s->enet), true, NULL); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->enet), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->enet), 0, + fsl_imx8mm_memmap[FSL_IMX8MM_ENET1].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->enet), 0, + qdev_get_gpio_in(gicdev, FSL_IMX8MM_ENET1_MAC_IRQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->enet), 1, + qdev_get_gpio_in(gicdev, FSL_IMX6_ENET1_MAC_1588_IRQ)); + /* SNVS */ if (!sysbus_realize(SYS_BUS_DEVICE(&s->snvs), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5: case FSL_IMX8MM_GPT1 ... FSL_IMX8MM_GPT6: case FSL_IMX8MM_ECSPI1 ... FSL_IMX8MM_ECSPI3: + case FSL_IMX8MM_ENET1: case FSL_IMX8MM_I2C1 ... FSL_IMX8MM_I2C4: case FSL_IMX8MM_PCIE1: case FSL_IMX8MM_PCIE_PHY1: @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) } } +static const Property fsl_imx8mm_properties[] = { + DEFINE_PROP_UINT32("fec1-phy-num", FslImx8mmState, phy_num, 0), + DEFINE_PROP_BOOL("fec1-phy-connected", FslImx8mmState, phy_connected, true), +}; + static void fsl_imx8mm_class_init(ObjectClass *oc, const void *data) { DeviceClass *dc = DEVICE_CLASS(oc); + device_class_set_props(dc, fsl_imx8mm_properties); dc->realize = fsl_imx8mm_realize; dc->desc = "i.MX 8MM SoC"; diff --git a/hw/arm/imx8mm-evk.c b/hw/arm/imx8mm-evk.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/imx8mm-evk.c +++ b/hw/arm/imx8mm-evk.c @@ -XXX,XX +XXX,XX @@ static void imx8mm_evk_init(MachineState *machine) s = FSL_IMX8MM(object_new_with_props(TYPE_FSL_IMX8MM, OBJECT(machine), "soc", &error_fatal, NULL)); + object_property_set_uint(OBJECT(s), "fec1-phy-num", 1, &error_fatal); sysbus_realize_and_unref(SYS_BUS_DEVICE(s), &error_fatal); memory_region_add_subregion(get_system_memory(), FSL_IMX8MM_RAM_START, diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx8mp_analog.h" #include "hw/misc/imx8mp_ccm.h" -#include "hw/or-irq.h" +#include "hw/net/imx_fec.h" +#include "hw/core/or-irq.h" #include "hw/pci-host/designware.h" #include "hw/pci-host/fsl_imx8m_phy.h" #include "hw/sd/sdhci.h" @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMXI2CState i2c[FSL_IMX8MM_NUM_I2CS]; IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; + IMXFECState enet; SDHCIState usdhc[FSL_IMX8MM_NUM_USDHCS]; IMX2WdtState wdt[FSL_IMX8MM_NUM_WDTS]; DesignwarePCIEHost pcie; FslImx8mPciePhyState pcie_phy; OrIRQState gpt5_gpt6_irq; + + uint32_t phy_num; + bool phy_connected; }; enum FslImx8mmMemoryRegions { @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_WDOG2_IRQ = 79, FSL_IMX8MM_WDOG3_IRQ = 10, + FSL_IMX8MM_ENET1_MAC_IRQ = 118, + FSL_IMX6_ENET1_MAC_1588_IRQ = 121, + FSL_IMX8MM_PCI_INTA_IRQ = 122, FSL_IMX8MM_PCI_INTB_IRQ = 123, FSL_IMX8MM_PCI_INTC_IRQ = 124, -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> It enables emulation of USB on iMX8MM Enables testing and debugging of USB drivers Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx8mm.c | 27 +++++++++++++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 6 ++++++ 3 files changed, 34 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM select SDHCI select PCI_EXPRESS_DESIGNWARE select PCI_EXPRESS_FSL_IMX8M_PHY + select USB_DWC3 select WDT_IMX2 config FSL_IMX8MM_EVK diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC); } + for (i = 0; i < FSL_IMX8MM_NUM_USBS; i++) { + g_autofree char *name = g_strdup_printf("usb%d", i); + object_initialize_child(obj, name, &s->usb[i], TYPE_USB_DWC3); + } + for (i = 0; i < FSL_IMX8MM_NUM_ECSPIS; i++) { g_autofree char *name = g_strdup_printf("spi%d", i + 1); object_initialize_child(obj, name, &s->spi[i], TYPE_IMX_SPI); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) qdev_get_gpio_in(gicdev, usdhc_table[i].irq)); } + /* USBs */ + for (i = 0; i < FSL_IMX8MM_NUM_USBS; i++) { + static const struct { + hwaddr addr; + unsigned int irq; + } usb_table[FSL_IMX8MM_NUM_USBS] = { + { fsl_imx8mm_memmap[FSL_IMX8MM_USB1].addr, FSL_IMX8MM_USB1_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_USB2].addr, FSL_IMX8MM_USB2_IRQ }, + }; + + qdev_prop_set_uint32(DEVICE(&s->usb[i].sysbus_xhci), "p2", 1); + qdev_prop_set_uint32(DEVICE(&s->usb[i].sysbus_xhci), "p3", 1); + qdev_prop_set_uint32(DEVICE(&s->usb[i].sysbus_xhci), "slots", 2); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->usb[i]), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->usb[i]), 0, usb_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->usb[i].sysbus_xhci), 0, + qdev_get_gpio_in(gicdev, usb_table[i].irq)); + } + /* ECSPIs */ for (i = 0; i < FSL_IMX8MM_NUM_ECSPIS; i++) { static const struct { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_OCRAM: case FSL_IMX8MM_SNVS_HP: case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4: + case FSL_IMX8MM_USB1 ... FSL_IMX8MM_USB2: case FSL_IMX8MM_USDHC1 ... FSL_IMX8MM_USDHC3: case FSL_IMX8MM_WDOG1 ... FSL_IMX8MM_WDOG3: /* device implemented and treated above */ diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/sd/sdhci.h" #include "hw/ssi/imx_spi.h" #include "hw/timer/imx_gpt.h" +#include "hw/usb/hcd-dwc3.h" #include "hw/watchdog/wdt_imx2.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ enum FslImx8mmConfiguration { FSL_IMX8MM_NUM_I2CS = 4, FSL_IMX8MM_NUM_IRQS = 128, FSL_IMX8MM_NUM_UARTS = 4, + FSL_IMX8MM_NUM_USBS = 2, FSL_IMX8MM_NUM_USDHCS = 3, FSL_IMX8MM_NUM_WDTS = 3, }; @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMXFECState enet; SDHCIState usdhc[FSL_IMX8MM_NUM_USDHCS]; IMX2WdtState wdt[FSL_IMX8MM_NUM_WDTS]; + USBDWC3 usb[FSL_IMX8MM_NUM_USBS]; DesignwarePCIEHost pcie; FslImx8mPciePhyState pcie_phy; OrIRQState gpt5_gpt6_irq; @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_I2C3_IRQ = 37, FSL_IMX8MM_I2C4_IRQ = 38, + FSL_IMX8MM_USB1_IRQ = 40, + FSL_IMX8MM_USB2_IRQ = 41, + FSL_IMX8MM_GPT1_IRQ = 55, FSL_IMX8MM_GPT2_IRQ = 54, FSL_IMX8MM_GPT3_IRQ = 53, -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> Added script that would validate the iMX8MM emulation by checking the linux console log. If it succeeds, it will return:- ok 1 test_imx8mm_evk.Imx8mmEvkMachine.test_aarch64_imx8mm_evk_usdhc Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Bernhard Beschow <shentey@gmail.com> [PMM: Add missing blank lines that flake8 wants] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 1 + tests/functional/aarch64/meson.build | 2 + tests/functional/aarch64/test_imx8mm_evk.py | 69 +++++++++++++++++++++ 3 files changed, 72 insertions(+) create mode 100755 tests/functional/aarch64/test_imx8mm_evk.py diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/arm/fsl-imx8mm.c F: hw/arm/imx8mm-evk.c F: include/hw/arm/fsl-imx8mm.h F: docs/system/arm/imx8m.rst +F: tests/functional/aarch64/test_imx8mm_evk.py MCIMX8MP-EVK / i.MX8MP M: Bernhard Beschow <shentey@gmail.com> diff --git a/tests/functional/aarch64/meson.build b/tests/functional/aarch64/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/functional/aarch64/meson.build +++ b/tests/functional/aarch64/meson.build @@ -XXX,XX +XXX,XX @@ test_aarch64_timeouts = { 'aspeed_ast2700a2' : 600, 'aspeed_ast2700fc' : 600, 'device_passthrough' : 720, + 'imx8mm_evk' : 240, 'imx8mp_evk' : 240, 'raspi4' : 480, 'reverse_debug' : 180, @@ -XXX,XX +XXX,XX @@ tests_aarch64_system_thorough = [ 'aspeed_ast2700fc', 'device_passthrough', 'hotplug_pci', + 'imx8mm_evk', 'imx8mp_evk', 'kvm', 'multiprocess', diff --git a/tests/functional/aarch64/test_imx8mm_evk.py b/tests/functional/aarch64/test_imx8mm_evk.py new file mode 100755 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/functional/aarch64/test_imx8mm_evk.py @@ -XXX,XX +XXX,XX @@ +#!/usr/bin/env python3 +# +# Functional test that boots a Linux kernel and checks the console +# +# SPDX-License-Identifier: GPL-2.0-or-later + +from qemu_test import LinuxKernelTest, Asset + + +class Imx8mmEvkMachine(LinuxKernelTest): + + ASSET_IMAGE = Asset( + ('https://cloud.debian.org/images/cloud/bookworm/20231210-1590/' + 'debian-12-generic-arm64-20231210-1590.tar.xz'), + '7ebf1577b32d5af6204df74b54ca2e4675de9b5a9fa14f3ff70b88eeb7b3b359') + + KERNEL_OFFSET = 0x51000000 + KERNEL_SIZE = 32622528 + INITRD_OFFSET = 0x76000000 + INITRD_SIZE = 30987766 + DTB_OFFSET = 0x64DB5000 + DTB_SIZE = 36812 + + def extract(self, in_path, out_path, offset, size): + try: + with open(in_path, "rb") as source: + source.seek(offset) + data = source.read(size) + with open(out_path, "wb") as target: + target.write(data) + except (IOError, ValueError) as e: + self.log.error(f"Failed to extract {out_path}: {e}") + raise + + def setUp(self): + super().setUp() + + self.image_path = self.scratch_file("disk.raw") + self.kernel_path = self.scratch_file("linux") + self.initrd_path = self.scratch_file("initrd.zstd") + self.dtb_path = self.scratch_file("imx8mm-evk.dtb") + + self.archive_extract(self.ASSET_IMAGE) + self.extract(self.image_path, self.kernel_path, + self.KERNEL_OFFSET, self.KERNEL_SIZE) + self.extract(self.image_path, self.initrd_path, + self.INITRD_OFFSET, self.INITRD_SIZE) + self.extract(self.image_path, self.dtb_path, + self.DTB_OFFSET, self.DTB_SIZE) + + def test_aarch64_imx8mm_evk_usdhc(self): + self.require_accelerator("tcg") + self.set_machine('imx8mm-evk') + self.vm.set_console(console_index=1) + self.vm.add_args('-m', '2G', + '-smp', '4', + '-kernel', self.kernel_path, + '-initrd', self.initrd_path, + '-dtb', self.dtb_path, + '-append', 'root=/dev/mmcblk2p1', + '-drive', f'file={self.image_path},if=sd,bus=2,' + 'format=raw,id=mmcblk2,snapshot=on') + + self.vm.launch() + self.wait_for_console_pattern('Welcome to ') + + +if __name__ == '__main__': + LinuxKernelTest.main() -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> As mentioned by Richard in [*]: We don't actually need any specific endianness here, because every byte has the same value. So we could simply drop MO_TE. That would produce a store in host-endianness, which will be fractionally more efficient on some hosts. [*] https://lore.kernel.org/qemu-devel/d64d3576-9188-4e74-afdc-3492c9feb8e0@linaro.org/ Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20260414005348.4767-2-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/helper-a64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/tcg/helper-a64.c b/target/arm/tcg/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/helper-a64.c +++ b/target/arm/tcg/helper-a64.c @@ -XXX,XX +XXX,XX @@ static uint64_t set_step_tags(CPUARMState *env, uint64_t toaddr, * the page dirty and will use the fast path. */ uint64_t repldata = data * 0x0101010101010101ULL; - MemOpIdx oi16 = make_memop_idx(MO_TE | MO_128, memidx); + MemOpIdx oi16 = make_memop_idx(MO_128, memidx); cpu_st16_mmu(env, toaddr, int128_make128(repldata, repldata), oi16, ra); mte_mops_set_tags(env, toaddr, 16, *mtedesc); return 16; -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Extract the implicit MO_TE definition in order to replace it in the next commit. Mechanical change using: $ for n in UW UL UQ UO SW SL SQ; do \ sed -i -e "s/MO_TE$n/MO_TE | MO_$n/" \ $(git grep -l MO_TE$n target/arm); \ done Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-3-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/m_helper.c | 6 +-- target/arm/tcg/mve_helper.c | 79 ++++++++++++++++++++----------------- 2 files changed, 45 insertions(+), 40 deletions(-) diff --git a/target/arm/tcg/m_helper.c b/target/arm/tcg/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/m_helper.c +++ b/target/arm/tcg/m_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest) /* Note that these stores can throw exceptions on MPU faults */ ARMMMUIdx mmu_idx = arm_mmu_idx(env); - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, arm_to_core_mmu_idx(mmu_idx)); cpu_stl_mmu(env, sp, nextinst, oi, GETPC()); cpu_stl_mmu(env, sp + 4, saved_psr, oi, GETPC()); @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) bool lspact = env->v7m.fpccr[s] & R_V7M_FPCCR_LSPACT_MASK; uintptr_t ra = GETPC(); ARMMMUIdx mmu_idx = arm_mmu_idx(env); - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, arm_to_core_mmu_idx(mmu_idx)); assert(env->v7m.secure); @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlldm)(CPUARMState *env, uint32_t fptr) ARMCPU *cpu = env_archcpu(env); uintptr_t ra = GETPC(); ARMMMUIdx mmu_idx = arm_mmu_idx(env); - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, arm_to_core_mmu_idx(mmu_idx)); /* fptr is the value of Rn, the frame pointer we load the FP regs from */ diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mve_helper.c +++ b/target/arm/tcg/mve_helper.c @@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env) } DO_VLDR(vldrb, MO_UB, 1, uint8_t, ldb, 1, uint8_t) -DO_VLDR(vldrh, MO_TEUW, 2, uint16_t, ldw, 2, uint16_t) -DO_VLDR(vldrw, MO_TEUL, 4, uint32_t, ldl, 4, uint32_t) +DO_VLDR(vldrh, MO_TE | MO_UW, 2, uint16_t, ldw, 2, uint16_t) +DO_VLDR(vldrw, MO_TE | MO_UL, 4, uint32_t, ldl, 4, uint32_t) DO_VSTR(vstrb, MO_UB, 1, stb, 1, uint8_t) -DO_VSTR(vstrh, MO_TEUW, 2, stw, 2, uint16_t) -DO_VSTR(vstrw, MO_TEUL, 4, stl, 4, uint32_t) +DO_VSTR(vstrh, MO_TE | MO_UW, 2, stw, 2, uint16_t) +DO_VSTR(vstrw, MO_TE | MO_UL, 4, stl, 4, uint32_t) DO_VLDR(vldrb_sh, MO_SB, 1, int8_t, ldb, 2, int16_t) DO_VLDR(vldrb_sw, MO_SB, 1, int8_t, ldb, 4, int32_t) DO_VLDR(vldrb_uh, MO_UB, 1, uint8_t, ldb, 2, uint16_t) DO_VLDR(vldrb_uw, MO_UB, 1, uint8_t, ldb, 4, uint32_t) -DO_VLDR(vldrh_sw, MO_TESW, 2, int16_t, ldw, 4, int32_t) -DO_VLDR(vldrh_uw, MO_TEUW, 2, uint16_t, ldw, 4, uint32_t) +DO_VLDR(vldrh_sw, MO_TE | MO_SW, 2, int16_t, ldw, 4, int32_t) +DO_VLDR(vldrh_uw, MO_TE | MO_UW, 2, uint16_t, ldw, 4, uint32_t) DO_VSTR(vstrb_h, MO_UB, 1, stb, 2, int16_t) DO_VSTR(vstrb_w, MO_UB, 1, stb, 4, int32_t) -DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t) +DO_VSTR(vstrh_w, MO_TE | MO_UW, 2, stw, 4, int32_t) #undef DO_VLDR #undef DO_VSTR @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (e = 0; e < 16 / 4; e++, mask >>= 4, eci_mask >>= 4) { \ if (!(eci_mask & 1)) { \ continue; \ @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (e = 0; e < 16 / 4; e++, mask >>= 4, eci_mask >>= 4) { \ if (!(eci_mask & 1)) { \ continue; \ @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t) DO_VLDR_SG(vldrb_sg_sh, MO_SB, int8_t, ldb, 2, int16_t, uint16_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_sw, MO_SB, int8_t, ldb, 4, int32_t, uint32_t, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_sw, MO_TESW, int16_t, ldw, 4, int32_t, uint32_t, ADDR_ADD, false) +DO_VLDR_SG(vldrh_sg_sw, MO_TE | MO_SW, int16_t, ldw, 4, + int32_t, uint32_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_ub, MO_UB, uint8_t, ldb, 1, uint8_t, uint8_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_uh, MO_UB, uint8_t, ldb, 2, uint16_t, uint16_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_uw, MO_UB, uint8_t, ldb, 4, uint32_t, uint32_t, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_uh, MO_TEUW, uint16_t, ldw, 2, uint16_t, uint16_t, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_uw, MO_TEUW, uint16_t, ldw, 4, uint32_t, uint32_t, ADDR_ADD, false) -DO_VLDR_SG(vldrw_sg_uw, MO_TEUL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD, false) +DO_VLDR_SG(vldrh_sg_uh, MO_TE | MO_UW, uint16_t, ldw, 2, + uint16_t, uint16_t, ADDR_ADD, false) +DO_VLDR_SG(vldrh_sg_uw, MO_TE | MO_UW, uint16_t, ldw, 4, + uint32_t, uint32_t, ADDR_ADD, false) +DO_VLDR_SG(vldrw_sg_uw, MO_TE | MO_UL, uint32_t, ldl, 4, + uint32_t, uint32_t, ADDR_ADD, false) DO_VLDR64_SG(vldrd_sg_ud, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_os_sw, MO_TESW, int16_t, ldw, 4, +DO_VLDR_SG(vldrh_sg_os_sw, MO_TE | MO_SW, int16_t, ldw, 4, int32_t, uint32_t, ADDR_ADD_OSH, false) -DO_VLDR_SG(vldrh_sg_os_uh, MO_TEUW, uint16_t, ldw, 2, +DO_VLDR_SG(vldrh_sg_os_uh, MO_TE | MO_UW, uint16_t, ldw, 2, uint16_t, uint16_t, ADDR_ADD_OSH, false) -DO_VLDR_SG(vldrh_sg_os_uw, MO_TEUW, uint16_t, ldw, 4, +DO_VLDR_SG(vldrh_sg_os_uw, MO_TE | MO_UW, uint16_t, ldw, 4, uint32_t, uint32_t, ADDR_ADD_OSH, false) -DO_VLDR_SG(vldrw_sg_os_uw, MO_TEUL, uint32_t, ldl, 4, +DO_VLDR_SG(vldrw_sg_os_uw, MO_TE | MO_UL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD_OSW, false) DO_VLDR64_SG(vldrd_sg_os_ud, ADDR_ADD_OSD, false) DO_VSTR_SG(vstrb_sg_ub, MO_UB, stb, 1, uint8_t, ADDR_ADD, false) DO_VSTR_SG(vstrb_sg_uh, MO_UB, stb, 2, uint16_t, ADDR_ADD, false) DO_VSTR_SG(vstrb_sg_uw, MO_UB, stb, 4, uint32_t, ADDR_ADD, false) -DO_VSTR_SG(vstrh_sg_uh, MO_TEUW, stw, 2, uint16_t, ADDR_ADD, false) -DO_VSTR_SG(vstrh_sg_uw, MO_TEUW, stw, 4, uint32_t, ADDR_ADD, false) -DO_VSTR_SG(vstrw_sg_uw, MO_TEUL, stl, 4, uint32_t, ADDR_ADD, false) +DO_VSTR_SG(vstrh_sg_uh, MO_TE | MO_UW, stw, 2, uint16_t, ADDR_ADD, false) +DO_VSTR_SG(vstrh_sg_uw, MO_TE | MO_UW, stw, 4, uint32_t, ADDR_ADD, false) +DO_VSTR_SG(vstrw_sg_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD, false) DO_VSTR64_SG(vstrd_sg_ud, ADDR_ADD, false) -DO_VSTR_SG(vstrh_sg_os_uh, MO_TEUW, stw, 2, uint16_t, ADDR_ADD_OSH, false) -DO_VSTR_SG(vstrh_sg_os_uw, MO_TEUW, stw, 4, uint32_t, ADDR_ADD_OSH, false) -DO_VSTR_SG(vstrw_sg_os_uw, MO_TEUL, stl, 4, uint32_t, ADDR_ADD_OSW, false) +DO_VSTR_SG(vstrh_sg_os_uh, MO_TE | MO_UW, stw, 2, uint16_t, ADDR_ADD_OSH, false) +DO_VSTR_SG(vstrh_sg_os_uw, MO_TE | MO_UW, stw, 4, uint32_t, ADDR_ADD_OSH, false) +DO_VSTR_SG(vstrw_sg_os_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD_OSW, false) DO_VSTR64_SG(vstrd_sg_os_ud, ADDR_ADD_OSD, false) -DO_VLDR_SG(vldrw_sg_wb_uw, MO_TEUL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD, true) +DO_VLDR_SG(vldrw_sg_wb_uw, MO_TE | MO_UL, uint32_t, ldl, 4, + uint32_t, uint32_t, ADDR_ADD, true) DO_VLDR64_SG(vldrd_sg_wb_ud, ADDR_ADD, true) -DO_VSTR_SG(vstrw_sg_wb_uw, MO_TEUL, stl, 4, uint32_t, ADDR_ADD, true) +DO_VSTR_SG(vstrw_sg_wb_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD, true) DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) /* @@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) static const uint8_t off[4] = { O1, O2, O3, O4 }; \ uint32_t addr, data; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) int y; /* y counts 0 2 0 2 */ \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0, y = 0; beat < 4; beat++, mask >>= 4, y ^= 2) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) uint32_t *qd; \ int y; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9) uint32_t addr, data; \ uint8_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9) int e; \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9) uint32_t addr, data; \ uint32_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20) static const uint8_t off[4] = { O1, O2, O3, O4 }; \ uint32_t addr, data; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20) int y; /* y counts 0 2 0 2 */ \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0, y = 0; beat < 4; beat++, mask >>= 4, y ^= 2) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20) uint32_t *qd; \ int y; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9) uint32_t addr, data; \ uint8_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9) int e; \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9) uint32_t addr, data; \ uint32_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-4-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/mve_helper.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mve_helper.c +++ b/target/arm/tcg/mve_helper.c @@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env) uint16_t eci_mask = mve_eci_mask(env); \ unsigned b, e; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MFLAG | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + mmu_idx); \ /* \ * R_SXTM allows the dest reg to become UNKNOWN for abandoned \ * beats so we don't care if we update part of the dest and \ @@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env) uint16_t mask = mve_element_mask(env); \ unsigned b, e; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MFLAG | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + mmu_idx); \ for (b = 0, e = 0; b < 16; b += ESIZE, e++) { \ if (mask & (1 << b)) { \ cpu_##STTYPE##_mmu(env, addr, d[H##ESIZE(e)], oi, GETPC()); \ @@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env) } DO_VLDR(vldrb, MO_UB, 1, uint8_t, ldb, 1, uint8_t) -DO_VLDR(vldrh, MO_TE | MO_UW, 2, uint16_t, ldw, 2, uint16_t) -DO_VLDR(vldrw, MO_TE | MO_UL, 4, uint32_t, ldl, 4, uint32_t) +DO_VLDR(vldrh, MO_UW, 2, uint16_t, ldw, 2, uint16_t) +DO_VLDR(vldrw, MO_UL, 4, uint32_t, ldl, 4, uint32_t) DO_VSTR(vstrb, MO_UB, 1, stb, 1, uint8_t) -DO_VSTR(vstrh, MO_TE | MO_UW, 2, stw, 2, uint16_t) -DO_VSTR(vstrw, MO_TE | MO_UL, 4, stl, 4, uint32_t) +DO_VSTR(vstrh, MO_UW, 2, stw, 2, uint16_t) +DO_VSTR(vstrw, MO_UL, 4, stl, 4, uint32_t) DO_VLDR(vldrb_sh, MO_SB, 1, int8_t, ldb, 2, int16_t) DO_VLDR(vldrb_sw, MO_SB, 1, int8_t, ldb, 4, int32_t) DO_VLDR(vldrb_uh, MO_UB, 1, uint8_t, ldb, 2, uint16_t) DO_VLDR(vldrb_uw, MO_UB, 1, uint8_t, ldb, 4, uint32_t) -DO_VLDR(vldrh_sw, MO_TE | MO_SW, 2, int16_t, ldw, 4, int32_t) -DO_VLDR(vldrh_uw, MO_TE | MO_UW, 2, uint16_t, ldw, 4, uint32_t) +DO_VLDR(vldrh_sw, MO_SW, 2, int16_t, ldw, 4, int32_t) +DO_VLDR(vldrh_uw, MO_UW, 2, uint16_t, ldw, 4, uint32_t) DO_VSTR(vstrb_h, MO_UB, 1, stb, 2, int16_t) DO_VSTR(vstrb_w, MO_UB, 1, stb, 4, int32_t) -DO_VSTR(vstrh_w, MO_TE | MO_UW, 2, stw, 4, int32_t) +DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) #undef DO_VLDR #undef DO_VSTR -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-5-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/mve_helper.c | 43 +++++++++++++++++-------------------- 1 file changed, 20 insertions(+), 23 deletions(-) diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mve_helper.c +++ b/target/arm/tcg/mve_helper.c @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MFLAG | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + mmu_idx); \ for (e = 0; e < 16 / ESIZE; e++, mask >>= ESIZE, eci_mask >>= ESIZE) { \ if (!(eci_mask & 1)) { \ continue; \ @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MFLAG | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + mmu_idx); \ for (e = 0; e < 16 / ESIZE; e++, mask >>= ESIZE, eci_mask >>= ESIZE) { \ if (!(eci_mask & 1)) { \ continue; \ @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) DO_VLDR_SG(vldrb_sg_sh, MO_SB, int8_t, ldb, 2, int16_t, uint16_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_sw, MO_SB, int8_t, ldb, 4, int32_t, uint32_t, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_sw, MO_TE | MO_SW, int16_t, ldw, 4, - int32_t, uint32_t, ADDR_ADD, false) +DO_VLDR_SG(vldrh_sg_sw, MO_SW, int16_t, ldw, 4, int32_t, uint32_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_ub, MO_UB, uint8_t, ldb, 1, uint8_t, uint8_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_uh, MO_UB, uint8_t, ldb, 2, uint16_t, uint16_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_uw, MO_UB, uint8_t, ldb, 4, uint32_t, uint32_t, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_uh, MO_TE | MO_UW, uint16_t, ldw, 2, - uint16_t, uint16_t, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_uw, MO_TE | MO_UW, uint16_t, ldw, 4, - uint32_t, uint32_t, ADDR_ADD, false) -DO_VLDR_SG(vldrw_sg_uw, MO_TE | MO_UL, uint32_t, ldl, 4, - uint32_t, uint32_t, ADDR_ADD, false) +DO_VLDR_SG(vldrh_sg_uh, MO_UW, uint16_t, ldw, 2, uint16_t, uint16_t, ADDR_ADD, false) +DO_VLDR_SG(vldrh_sg_uw, MO_UW, uint16_t, ldw, 4, uint32_t, uint32_t, ADDR_ADD, false) +DO_VLDR_SG(vldrw_sg_uw, MO_UL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD, false) DO_VLDR64_SG(vldrd_sg_ud, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_os_sw, MO_TE | MO_SW, int16_t, ldw, 4, +DO_VLDR_SG(vldrh_sg_os_sw, MO_SW, int16_t, ldw, 4, int32_t, uint32_t, ADDR_ADD_OSH, false) -DO_VLDR_SG(vldrh_sg_os_uh, MO_TE | MO_UW, uint16_t, ldw, 2, +DO_VLDR_SG(vldrh_sg_os_uh, MO_UW, uint16_t, ldw, 2, uint16_t, uint16_t, ADDR_ADD_OSH, false) -DO_VLDR_SG(vldrh_sg_os_uw, MO_TE | MO_UW, uint16_t, ldw, 4, +DO_VLDR_SG(vldrh_sg_os_uw, MO_UW, uint16_t, ldw, 4, uint32_t, uint32_t, ADDR_ADD_OSH, false) -DO_VLDR_SG(vldrw_sg_os_uw, MO_TE | MO_UL, uint32_t, ldl, 4, +DO_VLDR_SG(vldrw_sg_os_uw, MO_UL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD_OSW, false) DO_VLDR64_SG(vldrd_sg_os_ud, ADDR_ADD_OSD, false) DO_VSTR_SG(vstrb_sg_ub, MO_UB, stb, 1, uint8_t, ADDR_ADD, false) DO_VSTR_SG(vstrb_sg_uh, MO_UB, stb, 2, uint16_t, ADDR_ADD, false) DO_VSTR_SG(vstrb_sg_uw, MO_UB, stb, 4, uint32_t, ADDR_ADD, false) -DO_VSTR_SG(vstrh_sg_uh, MO_TE | MO_UW, stw, 2, uint16_t, ADDR_ADD, false) -DO_VSTR_SG(vstrh_sg_uw, MO_TE | MO_UW, stw, 4, uint32_t, ADDR_ADD, false) -DO_VSTR_SG(vstrw_sg_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD, false) +DO_VSTR_SG(vstrh_sg_uh, MO_UW, stw, 2, uint16_t, ADDR_ADD, false) +DO_VSTR_SG(vstrh_sg_uw, MO_UW, stw, 4, uint32_t, ADDR_ADD, false) +DO_VSTR_SG(vstrw_sg_uw, MO_UL, stl, 4, uint32_t, ADDR_ADD, false) DO_VSTR64_SG(vstrd_sg_ud, ADDR_ADD, false) -DO_VSTR_SG(vstrh_sg_os_uh, MO_TE | MO_UW, stw, 2, uint16_t, ADDR_ADD_OSH, false) -DO_VSTR_SG(vstrh_sg_os_uw, MO_TE | MO_UW, stw, 4, uint32_t, ADDR_ADD_OSH, false) -DO_VSTR_SG(vstrw_sg_os_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD_OSW, false) +DO_VSTR_SG(vstrh_sg_os_uh, MO_UW, stw, 2, uint16_t, ADDR_ADD_OSH, false) +DO_VSTR_SG(vstrh_sg_os_uw, MO_UW, stw, 4, uint32_t, ADDR_ADD_OSH, false) +DO_VSTR_SG(vstrw_sg_os_uw, MO_UL, stl, 4, uint32_t, ADDR_ADD_OSW, false) DO_VSTR64_SG(vstrd_sg_os_ud, ADDR_ADD_OSD, false) -DO_VLDR_SG(vldrw_sg_wb_uw, MO_TE | MO_UL, uint32_t, ldl, 4, - uint32_t, uint32_t, ADDR_ADD, true) +DO_VLDR_SG(vldrw_sg_wb_uw, MO_UL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD, true) DO_VLDR64_SG(vldrd_sg_wb_ud, ADDR_ADD, true) -DO_VSTR_SG(vstrw_sg_wb_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD, true) +DO_VSTR_SG(vstrw_sg_wb_uw, MO_UL, stl, 4, uint32_t, ADDR_ADD, true) DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) /* -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-6-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 6 ++++++ target/arm/tcg/mve_helper.c | 3 ++- 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ #include "exec/hwaddr.h" #include "exec/vaddr.h" #include "exec/breakpoint.h" +#include "exec/memop.h" #include "accel/tcg/tb-cpu-state.h" #include "hw/core/registerfields.h" #include "tcg/tcg-gvec-desc.h" @@ -XXX,XX +XXX,XX @@ #define BANK_HYP 6 #define BANK_MON 7 +static inline MemOp mo_endian(CPUARMState *env) +{ + return EX_TBFLAG_ANY(env->hflags, BE_DATA) ? MO_BE : MO_LE; +} + static inline int arm_env_mmu_index(CPUARMState *env) { return EX_TBFLAG_ANY(env->hflags, MMUIDX); diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mve_helper.c +++ b/target/arm/tcg/mve_helper.c @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (e = 0; e < 16 / 4; e++, mask >>= 4, eci_mask >>= 4) { \ if (!(eci_mask & 1)) { \ continue; \ -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-7-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/mve_helper.c | 47 +++++++++++++++++++++++-------------- 1 file changed, 30 insertions(+), 17 deletions(-) diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mve_helper.c +++ b/target/arm/tcg/mve_helper.c @@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env) uint16_t eci_mask = mve_eci_mask(env); \ unsigned b, e; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MFLAG | MO_ALIGN, \ mmu_idx); \ /* \ * R_SXTM allows the dest reg to become UNKNOWN for abandoned \ @@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env) uint16_t mask = mve_element_mask(env); \ unsigned b, e; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MFLAG | MO_ALIGN, \ mmu_idx); \ for (b = 0, e = 0; b < 16; b += ESIZE, e++) { \ if (mask & (1 << b)) { \ @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MFLAG | MO_ALIGN, \ mmu_idx); \ for (e = 0; e < 16 / ESIZE; e++, mask >>= ESIZE, eci_mask >>= ESIZE) { \ if (!(eci_mask & 1)) { \ @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MFLAG | MO_ALIGN, \ mmu_idx); \ for (e = 0; e < 16 / ESIZE; e++, mask >>= ESIZE, eci_mask >>= ESIZE) { \ if (!(eci_mask & 1)) { \ @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (e = 0; e < 16 / 4; e++, mask >>= 4, eci_mask >>= 4) { \ if (!(eci_mask & 1)) { \ continue; \ @@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) static const uint8_t off[4] = { O1, O2, O3, O4 }; \ uint32_t addr, data; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) int y; /* y counts 0 2 0 2 */ \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0, y = 0; beat < 4; beat++, mask >>= 4, y ^= 2) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) uint32_t *qd; \ int y; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9) uint32_t addr, data; \ uint8_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9) int e; \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9) uint32_t addr, data; \ uint32_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20) static const uint8_t off[4] = { O1, O2, O3, O4 }; \ uint32_t addr, data; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20) int y; /* y counts 0 2 0 2 */ \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0, y = 0; beat < 4; beat++, mask >>= 4, y ^= 2) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20) uint32_t *qd; \ int y; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9) uint32_t addr, data; \ uint8_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9) int e; \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9) uint32_t addr, data; \ uint32_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-8-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/meson.build | 3 ++- target/arm/tcg/mve_helper.c | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/target/arm/tcg/meson.build b/target/arm/tcg/meson.build index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/meson.build +++ b/target/arm/tcg/meson.build @@ -XXX,XX +XXX,XX @@ arm_ss.add(when: 'TARGET_AARCH64', if_false: files('stubs32.c')) arm_ss.add(files( 'cpu32.c', 'm_helper.c', - 'mve_helper.c', )) arm_ss.add(when: 'TARGET_AARCH64', if_true: files( @@ -XXX,XX +XXX,XX @@ arm_common_system_ss.add( 'debug.c', 'hflags.c', 'gengvec.c', + 'mve_helper.c', 'neon_helper.c', 'op_helper.c', 'psci.c', @@ -XXX,XX +XXX,XX @@ arm_user_ss.add( 'debug.c', 'gengvec.c', 'hflags.c', + 'mve_helper.c', 'neon_helper.c', 'op_helper.c', 'tlb_helper.c', diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mve_helper.c +++ b/target/arm/tcg/mve_helper.c @@ -XXX,XX +XXX,XX @@ #include "helper-mve.h" #include "internals.h" #include "vec_internal.h" -#include "accel/tcg/cpu-ldst.h" +#include "accel/tcg/cpu-ldst-common.h" #include "tcg/tcg.h" #include "fpu/softfloat.h" #include "crypto/clmul.h" -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-9-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/m_helper.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/target/arm/tcg/m_helper.c b/target/arm/tcg/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/m_helper.c +++ b/target/arm/tcg/m_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest) /* Note that these stores can throw exceptions on MPU faults */ ARMMMUIdx mmu_idx = arm_mmu_idx(env); - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, arm_to_core_mmu_idx(mmu_idx)); cpu_stl_mmu(env, sp, nextinst, oi, GETPC()); cpu_stl_mmu(env, sp + 4, saved_psr, oi, GETPC()); @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) bool lspact = env->v7m.fpccr[s] & R_V7M_FPCCR_LSPACT_MASK; uintptr_t ra = GETPC(); ARMMMUIdx mmu_idx = arm_mmu_idx(env); - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, arm_to_core_mmu_idx(mmu_idx)); assert(env->v7m.secure); @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlldm)(CPUARMState *env, uint32_t fptr) ARMCPU *cpu = env_archcpu(env); uintptr_t ra = GETPC(); ARMMMUIdx mmu_idx = arm_mmu_idx(env); - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, arm_to_core_mmu_idx(mmu_idx)); /* fptr is the value of Rn, the frame pointer we load the FP regs from */ -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-10-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/m_helper.c | 2 +- target/arm/tcg/meson.build | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/target/arm/tcg/m_helper.c b/target/arm/tcg/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/m_helper.c +++ b/target/arm/tcg/m_helper.c @@ -XXX,XX +XXX,XX @@ #include "qemu/log.h" #include "exec/page-protection.h" #ifdef CONFIG_TCG -#include "accel/tcg/cpu-ldst.h" +#include "accel/tcg/cpu-ldst-common.h" #include "semihosting/common-semi.h" #endif #if !defined(CONFIG_USER_ONLY) diff --git a/target/arm/tcg/meson.build b/target/arm/tcg/meson.build index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/meson.build +++ b/target/arm/tcg/meson.build @@ -XXX,XX +XXX,XX @@ arm_ss.add(when: 'TARGET_AARCH64', if_false: files('stubs32.c')) arm_ss.add(files( 'cpu32.c', - 'm_helper.c', )) arm_ss.add(when: 'TARGET_AARCH64', if_true: files( @@ -XXX,XX +XXX,XX @@ arm_common_system_ss.add( 'debug.c', 'hflags.c', 'gengvec.c', + 'm_helper.c', 'mve_helper.c', 'neon_helper.c', 'op_helper.c', @@ -XXX,XX +XXX,XX @@ arm_user_ss.add( 'debug.c', 'gengvec.c', 'hflags.c', + 'm_helper.c', 'mve_helper.c', 'neon_helper.c', 'op_helper.c', -- 2.43.0 From: Thomas Huth <thuth@redhat.com> When writing to this register, QEMU currently aborts: $ echo "readl 0x10000018" | ./qemu-system-arm -audiodev none,id=snd0 \ -M integratorcp,accel=qtest,audiodev=snd0 -display none -qtest stdio [I 0.000000] OPENED [R +0.001907] readl 0x10000018 qemu: hardware error: integratorcm_read: CM_LMBUSCNT [...] Aborted (core dumped) This is bad, a guest should ideally never be able to kill QEMU like this. Now, according to the "Intergrator/CP User Guide" from: https://developer.arm.com/documentation/dui0159/b/porting-integrator-ap-and-im-pd1/registers "The Integrator/AP CM_LMBUSCNT has been removed." That means this register does not seem to be implemented on real CP boards at all, only for older AP boards. Thus it should be fine if we simply ignore this register in QEMU and handle it like all other unimplemented registers in the "default" handler of the case statement. Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3407 Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20260420064933.64765-1-thuth@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/integratorcp.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/hw/arm/integratorcp.c b/hw/arm/integratorcp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/integratorcp.c +++ b/hw/arm/integratorcp.c @@ -XXX,XX +XXX,XX @@ static uint64_t integratorcm_read(void *opaque, hwaddr offset, } else { return s->cm_lock; } - case 6: /* CM_LMBUSCNT */ - /* ??? High frequency timer. */ - hw_error("integratorcm_read: CM_LMBUSCNT"); case 7: /* CM_AUXOSC */ return s->cm_auxosc; case 8: /* CM_SDRAM */ -- 2.43.0 include/hw/arm/primecell.h used to be more expansive, but now the only thing it defines is the ARM_SYSCTL_GPIO_* constants for the GPIO lines for the arm-sysctl system-control device used on the Realview, Versatile and Versatile Express boards. Replace it with a header file specific to that device. virt.c and vmapple.c included primecell.h despite not using the constants it defined; there we can simply drop the include entirely. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20260416172627.690396-1-peter.maydell@linaro.org --- MAINTAINERS | 2 +- hw/arm/realview.c | 2 +- hw/arm/vexpress.c | 2 +- hw/arm/virt.c | 1 - hw/misc/arm_sysctl.c | 2 +- hw/vmapple/vmapple.c | 1 - include/hw/arm/primecell.h | 12 ------------ include/hw/misc/arm_sysctl.h | 16 ++++++++++++++++ 8 files changed, 20 insertions(+), 18 deletions(-) delete mode 100644 include/hw/arm/primecell.h create mode 100644 include/hw/misc/arm_sysctl.h diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/ssi/pl022.c F: include/hw/ssi/pl022.h F: hw/rtc/pl031.c F: include/hw/rtc/pl031.h -F: include/hw/arm/primecell.h F: hw/timer/cmsdk-apb-timer.c F: include/hw/timer/cmsdk-apb-timer.h F: tests/qtest/cmsdk-apb-timer-test.c @@ -XXX,XX +XXX,XX @@ F: hw/*/versatile* F: hw/i2c/arm_sbcon_i2c.c F: include/hw/i2c/arm_sbcon_i2c.h F: hw/misc/arm_sysctl.c +F: include/hw/misc/arm_sysctl.h F: docs/system/arm/versatile.rst Virt diff --git a/hw/arm/realview.c b/hw/arm/realview.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/realview.c +++ b/hw/arm/realview.c @@ -XXX,XX +XXX,XX @@ #include "target/arm/cpu.h" #include "hw/core/sysbus.h" #include "hw/arm/boot.h" -#include "hw/arm/primecell.h" #include "hw/arm/machines-qom.h" #include "hw/core/split-irq.h" +#include "hw/misc/arm_sysctl.h" #include "hw/net/lan9118.h" #include "hw/net/smc91c111.h" #include "hw/pci/pci.h" diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/vexpress.c +++ b/hw/arm/vexpress.c @@ -XXX,XX +XXX,XX @@ #include "qemu/datadir.h" #include "hw/core/sysbus.h" #include "hw/arm/boot.h" -#include "hw/arm/primecell.h" #include "hw/arm/machines-qom.h" +#include "hw/misc/arm_sysctl.h" #include "hw/net/lan9118.h" #include "hw/i2c/i2c.h" #include "net/net.h" diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ #include "monitor/qdev.h" #include "hw/core/sysbus.h" #include "hw/arm/boot.h" -#include "hw/arm/primecell.h" #include "hw/arm/virt.h" #include "hw/arm/machines-qom.h" #include "hw/block/flash.h" diff --git a/hw/misc/arm_sysctl.c b/hw/misc/arm_sysctl.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/arm_sysctl.c +++ b/hw/misc/arm_sysctl.c @@ -XXX,XX +XXX,XX @@ #include "system/runstate.h" #include "qemu/bitops.h" #include "hw/core/sysbus.h" +#include "hw/misc/arm_sysctl.h" #include "migration/vmstate.h" -#include "hw/arm/primecell.h" #include "qemu/log.h" #include "qemu/module.h" #include "qom/object.h" diff --git a/hw/vmapple/vmapple.c b/hw/vmapple/vmapple.c index XXXXXXX..XXXXXXX 100644 --- a/hw/vmapple/vmapple.c +++ b/hw/vmapple/vmapple.c @@ -XXX,XX +XXX,XX @@ #include "hw/core/sysbus.h" #include "hw/usb/usb.h" #include "hw/arm/boot.h" -#include "hw/arm/primecell.h" #include "hw/char/pl011.h" #include "hw/intc/arm_gic.h" #include "hw/intc/arm_gicv3_common.h" diff --git a/include/hw/arm/primecell.h b/include/hw/arm/primecell.h deleted file mode 100644 index XXXXXXX..XXXXXXX --- a/include/hw/arm/primecell.h +++ /dev/null @@ -XXX,XX +XXX,XX @@ -#ifndef PRIMECELL_H -#define PRIMECELL_H - -/* Declarations for ARM PrimeCell based periperals. */ -/* Also includes some devices that are currently only used by the - ARM boards. */ - -/* arm_sysctl GPIO lines */ -#define ARM_SYSCTL_GPIO_MMC_WPROT 0 -#define ARM_SYSCTL_GPIO_MMC_CARDIN 1 - -#endif diff --git a/include/hw/misc/arm_sysctl.h b/include/hw/misc/arm_sysctl.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/arm_sysctl.h @@ -XXX,XX +XXX,XX @@ +/* + * Status and system control registers for ARM RealView/Versatile boards. + * + * Copyright (c) Linaro Ltd + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#ifndef HW_MISC_ARM_SYSCTL_H +#define HW_MISC_ARM_SYSCTL_H + +/* arm_sysctl inbound GPIO lines */ +#define ARM_SYSCTL_GPIO_MMC_WPROT 0 +#define ARM_SYSCTL_GPIO_MMC_CARDIN 1 + +#endif -- 2.43.0 If we create a normally-AArch64 CPU and configure it with aarch64=off, this will by default leave all the AArch64 ID register values in its ARMISARegisters struct untouched. That in turn means that tests of cpu_isar_feature(aa64_something, cpu) will return true. Until now we have had a design policy that you shouldn't check an aa64_ feature unless you know that the CPU has AArch64; but this is quite fragile as it's easy to forget and only causes a problem in the corner case where AArch64 was turned off. In particular, when we extend the ability to disable AArch64 from only KVM to also TCG there are many more aa64 feature check points which we would otherwise have to audit for whether they needed to be guarded with a check on ARM_FEATURE_AARCH64. Instead, make the CPU realize function zero out all the 64-bit ID registers if a TCG CPU doesn't have AArch64; this will make aa64_ feature tests generally return false. We only do this for TCG because only TCG really needs it, and for KVM it might be confusing to have QEMU's idea of the ID registers be different from KVM's. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260416165353.589569-2-peter.maydell@linaro.org --- target/arm/cpu.c | 35 +++++++++++++++++++++++++++++++++++ target/arm/cpu.h | 3 ++- 2 files changed, 37 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ void arm_cpu_finalize_features(ARMCPU *cpu, Error **errp) } } +static void arm_clear_aarch64_idregs(ARMCPU *cpu) +{ + /* Zero out all the AArch64 ID registers in ARMISARegisters */ + SET_IDREG(&cpu->isar, ID_AA64ISAR0, 0); + SET_IDREG(&cpu->isar, ID_AA64ISAR1, 0); + SET_IDREG(&cpu->isar, ID_AA64ISAR2, 0); + SET_IDREG(&cpu->isar, ID_AA64PFR0, 0); + SET_IDREG(&cpu->isar, ID_AA64PFR1, 0); + SET_IDREG(&cpu->isar, ID_AA64PFR2, 0); + SET_IDREG(&cpu->isar, ID_AA64MMFR0, 0); + SET_IDREG(&cpu->isar, ID_AA64MMFR1, 0); + SET_IDREG(&cpu->isar, ID_AA64MMFR2, 0); + SET_IDREG(&cpu->isar, ID_AA64MMFR3, 0); + SET_IDREG(&cpu->isar, ID_AA64DFR0, 0); + SET_IDREG(&cpu->isar, ID_AA64DFR1, 0); + SET_IDREG(&cpu->isar, ID_AA64AFR0, 0); + SET_IDREG(&cpu->isar, ID_AA64AFR1, 0); + SET_IDREG(&cpu->isar, ID_AA64ZFR0, 0); + SET_IDREG(&cpu->isar, ID_AA64SMFR0, 0); +} + static void arm_cpu_realizefn(DeviceState *dev, Error **errp) { CPUState *cs = CPU(dev); @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) } #endif + /* + * A TCG aarch64=off CPU has no AArch64 at all, so we clear out the + * ID registers to avoid cpu_isar_feature(aa64_something, cpu) tests + * incorrectly returning true. We don't do this for other accelerators + * (which in practice means "for KVM", since no others have AArch32 + * guest support) because from KVM's point of view the AArch64 ID + * registers still exist and must have their correct values. So we + * avoid clearing them out so that we don't have QEMU and KVM with + * different ideas of the ID registers. + */ + if (tcg_enabled() && !arm_feature(env, ARM_FEATURE_AARCH64)) { + arm_clear_aarch64_idregs(cpu); + } + #ifdef CONFIG_USER_ONLY /* * User mode relies on IC IVAU instructions to catch modification of diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ArchCPU { * Note that if you add an ID register to the ARMISARegisters struct * you need to also update the 32-bit and 64-bit versions of the * kvm_arm_get_host_cpu_features() function to correctly populate the - * field by reading the value from the KVM vCPU. + * field by reading the value from the KVM vCPU. If it is an AArch64 + * ID register then you also must update arm_clear_aarch64_idregs(). */ struct ARMISARegisters { uint32_t mvfr0; -- 2.43.0 Allow the 'aarch64=off' property, which is currently KVM-only, to be set for TCG CPUs also. Note that we don't permit it on the qemu-aarch64 user-mode binary: this makes no sense as that executable can only handle AArch64 syscalls (and it would also assert at startup since it doesn't compile in the A32-specific GDB xml files like arm-neon.xml). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Clément Chigot <chigot@adacore.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20260416165353.589569-3-peter.maydell@linaro.org --- docs/system/arm/cpu-features.rst | 10 +++++---- target/arm/cpu-features.h | 5 +++++ target/arm/cpu.c | 36 ++++++++++++++++++++++++++++---- tests/qtest/arm-cpu-features.c | 8 ++----- 4 files changed, 45 insertions(+), 14 deletions(-) diff --git a/docs/system/arm/cpu-features.rst b/docs/system/arm/cpu-features.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/cpu-features.rst +++ b/docs/system/arm/cpu-features.rst @@ -XXX,XX +XXX,XX @@ not implement ARMv8-A, will not have the ``aarch64`` CPU property. QEMU's support may be limited for some CPU features, only partially supporting the feature or only supporting the feature under certain configurations. For example, the ``aarch64`` CPU feature, which, when -disabled, enables the optional AArch32 CPU feature, is only supported -when using the KVM accelerator and when running on a host CPU type that -supports the feature. While ``aarch64`` currently only works with KVM, -it could work with TCG. CPU features that are specific to KVM are +disabled, enables the optional AArch32 CPU feature, can only be set to +``off`` on the TCG and KVM accelerators, and it cannot be set to +``off`` under KVM unless running on a host CPU type that supports +running guests in AArch32. + +CPU features that are inherently specific to KVM are prefixed with "kvm-" and are described in "KVM VCPU Features". CPU Feature Probing diff --git a/target/arm/cpu-features.h b/target/arm/cpu-features.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu-features.h +++ b/target/arm/cpu-features.h @@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa64_aa32_el2(const ARMISARegisters *id) return FIELD_EX64_IDREG(id, ID_AA64PFR0, EL2) >= 2; } +static inline bool isar_feature_aa64_aa32_el3(const ARMISARegisters *id) +{ + return FIELD_EX64_IDREG(id, ID_AA64PFR0, EL3) >= 2; +} + static inline bool isar_feature_aa64_ras(const ARMISARegisters *id) { return FIELD_EX64_IDREG(id, ID_AA64PFR0, RAS) != 0; diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void aarch64_cpu_set_aarch64(Object *obj, bool value, Error **errp) * uniform execution state like do_interrupt. */ if (value == false) { - if (!kvm_enabled() || !kvm_arm_aarch32_supported()) { - error_setg(errp, "'aarch64' feature cannot be disabled " - "unless KVM is enabled and 32-bit EL1 " - "is supported"); + if (kvm_enabled()) { + if (!kvm_arm_aarch32_supported()) { + error_setg(errp, "'aarch64' feature cannot be disabled for KVM " + "because this host does not support 32-bit EL1"); + return; + } + } else if (tcg_enabled()) { +#ifdef CONFIG_USER_ONLY + error_setg(errp, "'aarch64' feature cannot be disabled for " + "usermode emulator qemu-aarch64; use qemu-arm instead"); + return; +#else + bool aa32_at_highest_el; + if (arm_feature(&cpu->env, ARM_FEATURE_EL3)) { + aa32_at_highest_el = cpu_isar_feature(aa64_aa32_el3, cpu); + } else if (arm_feature(&cpu->env, ARM_FEATURE_EL2)) { + aa32_at_highest_el = cpu_isar_feature(aa64_aa32_el2, cpu); + } else { + aa32_at_highest_el = cpu_isar_feature(aa64_aa32_el1, cpu); + } + + if (!aa32_at_highest_el) { + error_setg(errp, "'aarch64' feature cannot be disabled for " + "this TCG CPU because it does not support 32-bit " + "execution at its highest implemented exception " + "level"); + return; + } +#endif + } else { + error_setg(errp, "'aarch64' feature cannot be disabled for " + "this accelerator"); return; } unset_feature(&cpu->env, ARM_FEATURE_AARCH64); diff --git a/tests/qtest/arm-cpu-features.c b/tests/qtest/arm-cpu-features.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/arm-cpu-features.c +++ b/tests/qtest/arm-cpu-features.c @@ -XXX,XX +XXX,XX @@ static void test_query_cpu_model_expansion(const void *data) sve_tests_default(qts, "max"); pauth_tests_default(qts, "max"); - /* Test that features that depend on KVM generate errors without. */ - assert_error(qts, "max", - "'aarch64' feature cannot be disabled " - "unless KVM is enabled and 32-bit EL1 " - "is supported", - "{ 'aarch64': false }"); + /* TCG allows us to turn off AArch64 on the 'max' CPU type */ + assert_set_feature(qts, "max", "aarch64", false); } qtest_quit(qts); -- 2.43.0 Add a basic test of the TCG 'aarch64=off' functionality; this is the same as our existing arm/test_virt test, but it runs the AArch32 guest kernel on qemu-system-aarch64 with -cpu max,aarch64=off. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20260416165353.589569-4-peter.maydell@linaro.org --- tests/functional/aarch64/meson.build | 1 + .../aarch64/test_virt_aarch64_off.py | 37 +++++++++++++++++++ 2 files changed, 38 insertions(+) create mode 100755 tests/functional/aarch64/test_virt_aarch64_off.py diff --git a/tests/functional/aarch64/meson.build b/tests/functional/aarch64/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/functional/aarch64/meson.build +++ b/tests/functional/aarch64/meson.build @@ -XXX,XX +XXX,XX @@ tests_aarch64_system_thorough = [ 'tcg_plugins', 'tuxrun', 'virt', + 'virt_aarch64_off', 'virt_gpu', 'virt_vbsa', 'xen', diff --git a/tests/functional/aarch64/test_virt_aarch64_off.py b/tests/functional/aarch64/test_virt_aarch64_off.py new file mode 100755 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/functional/aarch64/test_virt_aarch64_off.py @@ -XXX,XX +XXX,XX @@ +#!/usr/bin/env python3 +# +# Functional test that boots an AArch32 Linux kernel and checks the console +# on a TCG aarch64 CPU with aarch64=off. This is the same image etc +# as we use in tests/functional/arm/test_virt.py. +# +# SPDX-License-Identifier: GPL-2.0-or-later + +from qemu_test import LinuxKernelTest, Asset + +class ArmVirtMachine(LinuxKernelTest): + + ASSET_KERNEL = Asset( + ('https://archives.fedoraproject.org/pub/archive/fedora/linux/' + 'releases/29/Everything/armhfp/os/images/pxeboot/vmlinuz'), + '18dd5f1a9a28bd539f9d047f7c0677211bae528e8712b40ca5a229a4ad8e2591') + + def test_arm_virt(self): + self.set_machine('virt') + # KVM aarch64=off requires a host CPU that supports it, so + # restrict the test to TCG only + self.require_accelerator('tcg') + self.vm.add_args('-cpu', 'max,aarch64=off') + + kernel_path = self.ASSET_KERNEL.fetch() + + self.vm.set_console() + kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE + + 'console=ttyAMA0') + self.vm.add_args('-kernel', kernel_path, + '-append', kernel_command_line) + self.vm.launch() + console_pattern = 'Kernel command line: %s' % kernel_command_line + self.wait_for_console_pattern(console_pattern) + +if __name__ == '__main__': + LinuxKernelTest.main() -- 2.43.0 From: Eric Auger <eric.auger@redhat.com> We introduce a datatype for a tolerance with respect to a given cpreg migration issue. The tolerance applies to a given cpreg kvm index, and can be of different types: a) mismatch in cpreg indexes - ToleranceNotOnBothEnds (cpreg index is allowed to be only present on one end) - ToleranceOnlySrcTestValue (cpreg index is allowed to be only present in source if its value @mask field matches @value) b) mismatch in cpreg values - ToleranceDiffInMask (value differences are allowed only within a mask) - ToleranceFieldLT (incoming field value must be less than a given value) - ToleranceFieldGT (incoming field value must be greater than a given value) A QLIST of such tolerances can be populated using a new helper: arm_register_cpreg_mig_tolerance() and arm_cpu_match_cpreg_mig_tolerance() allows to check whether a tolerance exists for a given kvm index and its criterion is matched. callers for those helpers will be introduced in subsequent patches. Only registration of migration tolerances related to cpreg index mismatch is currently allowed. Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-id: 20260420140552.104369-2-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 82 ++++++++++++++++++++++++++++++++++++++++++ target/arm/cpu.h | 1 + target/arm/internals.h | 54 ++++++++++++++++++++++++++++ 3 files changed, 137 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ void arm_register_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook, QLIST_INSERT_HEAD(&cpu->el_change_hooks, entry, node); } +static ARMCPRegMigTolerance *find_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx) +{ + ARMCPRegMigTolerance *t; + QLIST_FOREACH(t, &cpu->cpreg_mig_tolerances, node) { + if (t->kvmidx == kvmidx) { + return t; + } + } + return NULL; +} + +void arm_register_cpreg_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx, + uint64_t mask, uint64_t value, + ARMCPRegMigToleranceType type) +{ + ARMCPRegMigTolerance *entry; + + /* make sure the kvmidx has not tolerance already registered */ + assert(!find_mig_tolerance(cpu, kvmidx)); + + assert(type == ToleranceNotOnBothEnds || + type == ToleranceOnlySrcTestValue); + + entry = g_new0(ARMCPRegMigTolerance, 1); + + entry->kvmidx = kvmidx; + entry->mask = mask; + entry->value = value; + entry->type = type; + + QLIST_INSERT_HEAD(&cpu->cpreg_mig_tolerances, entry, node); +} + +bool arm_cpu_match_cpreg_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx, + uint64_t vmstate_value, uint64_t local_value, + ARMCPRegMigToleranceType type) +{ + ARMCPRegMigTolerance *t = find_mig_tolerance(cpu, kvmidx); + uint64_t diff, diff_outside_mask, field; + + if (!t || t->type != type) { + return false; + } + + if (type == ToleranceNotOnBothEnds) { + return true; + } + + if (type == ToleranceOnlySrcTestValue && + ((vmstate_value & t->mask) == t->value)) { + return true; + } + + /* Need to check the mask */ + diff = vmstate_value ^ local_value; + diff_outside_mask = diff & ~t->mask; + + if (diff_outside_mask) { + /* there are differences outside of the mask */ + return false; + } + if (type == ToleranceDiffInMask) { + /* differences only in the field, tolerance matched */ + return true; + } + /* need to compare field value against authorized ones */ + field = vmstate_value & t->mask; + if (type == ToleranceFieldLT && (field < t->value)) { + return true; + } + if (type == ToleranceFieldGT && (field > t->value)) { + return true; + } + return false; +} + static void cp_reg_reset(gpointer key, gpointer value, gpointer opaque) { /* Reset a single ARMCPRegInfo register */ @@ -XXX,XX +XXX,XX @@ static void arm_cpu_initfn(Object *obj) QLIST_INIT(&cpu->pre_el_change_hooks); QLIST_INIT(&cpu->el_change_hooks); + QLIST_INIT(&cpu->cpreg_mig_tolerances); #ifdef CONFIG_USER_ONLY # ifdef TARGET_AARCH64 @@ -XXX,XX +XXX,XX @@ static void arm_cpu_finalizefn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); ARMELChangeHook *hook, *next; + ARMCPRegMigTolerance *t, *n; g_hash_table_destroy(cpu->cp_regs); @@ -XXX,XX +XXX,XX @@ static void arm_cpu_finalizefn(Object *obj) QLIST_REMOVE(hook, node); g_free(hook); } + QLIST_FOREACH_SAFE(t, &cpu->cpreg_mig_tolerances, node, n) { + QLIST_REMOVE(t, node); + g_free(t); + } #ifndef CONFIG_USER_ONLY if (cpu->pmu_timer) { timer_free(cpu->pmu_timer); diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ArchCPU { QLIST_HEAD(, ARMELChangeHook) pre_el_change_hooks; QLIST_HEAD(, ARMELChangeHook) el_change_hooks; + QLIST_HEAD(, ARMCPRegMigTolerance) cpreg_mig_tolerances; int32_t node_id; /* NUMA node this CPU belongs to */ diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ int compare_u64(const void *a, const void *b); /* Used in FEAT_MEC to set the MECIDWidthm1 field in the MECIDR_EL2 register. */ #define MECID_WIDTH 16 +typedef enum { + ToleranceNotOnBothEnds, + ToleranceOnlySrcTestValue, + ToleranceDiffInMask, + ToleranceFieldLT, + ToleranceFieldGT, +} ARMCPRegMigToleranceType; + +typedef struct ARMCPRegMigTolerance { + uint64_t kvmidx; + uint64_t mask; + uint64_t value; + ARMCPRegMigToleranceType type; + QLIST_ENTRY(ARMCPRegMigTolerance) node; +} ARMCPRegMigTolerance; + +/** + * arm_register_cpreg_mig_tolerance: + * Register a migration tolerance wrt one given cpreg identified by its + * @kvmidx. Calling this function twice for the same @kvmidx is a + * programming error and will cause an assertion failure. + * + * @cpu: vcpu to apply the migration tolerance on + * @kvmidx: kvm index of the cpreg the tolerance applies to + * @mask: bitmask where a difference is tolerated + * (relevant with ToleranceDiffInMask) + * @value: value the bitmask field is compared with + * (relevant with ToleranceFieldLT and ToleranceFieldGT) + * @type: type of the migration tolerance: + * - ToleranceNotOnBothEnds (cpreg index is allowed to be only present + * on one end) + * - ToleranceOnlySrcTestValue (cpreg index is allowed to be only + * present in source if its value @mask field matches @value) + * - ToleranceDiffInMask (mismatch in cpreg values are only tolerated + * if differences are within @mask) + * - ToleranceFieldLT (mismatch in cpreg values are only tolerated + * if incoming @bitmask field value is less than @value) + * - ToleranceFieldGT (mismatch in cpreg values are only tolerated + * if incoming @bitmask field value is greater than @value) + */ +void arm_register_cpreg_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx, + uint64_t mask, uint64_t value, + ARMCPRegMigToleranceType type); + +/** + * arm_cpu_match_cpreg_mig_tolerance: + * Check whether a tolerance of type @type exists for a given @kvmidx + * and the tolerance criterion is satisfied + */ +bool arm_cpu_match_cpreg_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx, + uint64_t vmstate_value, uint64_t local_value, + ARMCPRegMigToleranceType type); + + #endif -- 2.43.0 From: Eric Auger <eric.auger@redhat.com> If there is a mismatch between the cpreg indexes found on both ends, check whether a tolerance was registered for the given kvmidx. If any, silence warning/errors. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20260420140552.104369-3-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/machine.c | 21 +++++++++++++++------ target/arm/trace-events | 2 ++ 2 files changed, 17 insertions(+), 6 deletions(-) diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static void handle_cpreg_missing_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx { g_autofree gchar *name = print_register_name(kvmidx); + if (arm_cpu_match_cpreg_mig_tolerance(cpu, kvmidx, + 0, 0, ToleranceNotOnBothEnds)) { + trace_tolerate_cpreg_missing_in_incoming_stream(name); + return; + } warn_report("%s: %s " "expected by the destination but not in the incoming stream: " "skip it", __func__, name); } /* - * Handle the situation where @kvmidx is in the incoming stream - * but not on destination. This currently fails the migration but - * we plan to accomodate some exceptions, hence the boolean returned value. + * Handle the situation where @kvmidx is in the incoming + * stream but not on destination. This fails the migration if + * no cpreg mig tolerance is matched for this @kvmidx + * Return true if the migration should eventually fail */ static bool handle_cpreg_only_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx) { g_autofree gchar *name = print_register_name(kvmidx); - bool fail = true; + if (arm_cpu_match_cpreg_mig_tolerance(cpu, kvmidx, + 0, 0, ToleranceNotOnBothEnds)) { + trace_tolerate_cpreg_only_in_incoming_stream(name); + return false; + } error_report("%s: %s in the incoming stream but unknown on the " "destination: fail migration", __func__, name); - - return fail; + return true; } static int cpu_post_load(void *opaque, int version_id) diff --git a/target/arm/trace-events b/target/arm/trace-events index XXXXXXX..XXXXXXX 100644 --- a/target/arm/trace-events +++ b/target/arm/trace-events @@ -XXX,XX +XXX,XX @@ arm_psci_call(uint64_t x0, uint64_t x1, uint64_t x2, uint64_t x3, uint32_t cpuid # machine.c cpu_post_load(uint32_t cpreg_vmstate_array_len, uint32_t cpreg_array_len) "cpreg_vmstate_array_len=%d cpreg_array_len=%d" +tolerate_cpreg_missing_in_incoming_stream(char *name) "%s is missing in incoming stream but this is explicitly tolerated" +tolerate_cpreg_only_in_incoming_stream(char *name) "%s is in incoming stream but not on destination but this is explicitly tolerated" -- 2.43.0 From: Eric Auger <eric.auger@redhat.com> Pass the value of the incoming register to handle_cpreg_only_in_incoming_stream and check whether there is a matching ToleranceOnlySrcTestValue tolerance. Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-id: 20260420140552.104369-4-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/machine.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static void handle_cpreg_missing_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx * no cpreg mig tolerance is matched for this @kvmidx * Return true if the migration should eventually fail */ -static bool handle_cpreg_only_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx) +static bool +handle_cpreg_only_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx, uint64_t value) { g_autofree gchar *name = print_register_name(kvmidx); if (arm_cpu_match_cpreg_mig_tolerance(cpu, kvmidx, - 0, 0, ToleranceNotOnBothEnds)) { + 0, 0, ToleranceNotOnBothEnds) || + arm_cpu_match_cpreg_mig_tolerance(cpu, kvmidx, + value, 0, ToleranceOnlySrcTestValue)) { trace_tolerate_cpreg_only_in_incoming_stream(name); return false; } @@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id) } if (cpu->cpreg_vmstate_indexes[v] < cpu->cpreg_indexes[i]) { fail = handle_cpreg_only_in_incoming_stream(cpu, - cpu->cpreg_vmstate_indexes[v++]); + cpu->cpreg_vmstate_indexes[v], + cpu->cpreg_vmstate_values[v]); + v++; continue; } /* matching register, copy the value over */ @@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id) */ for ( ; v < cpu->cpreg_vmstate_array_len; v++) { fail = handle_cpreg_only_in_incoming_stream(cpu, - cpu->cpreg_vmstate_indexes[v]); + cpu->cpreg_vmstate_indexes[v], + cpu->cpreg_vmstate_values[v]); } if (fail) { return -1; -- 2.43.0 From: Eric Auger <eric.auger@redhat.com> Before linux v6.13 those registers were erroneously unconditionally exposed and this was fixed by commits: - 0fcb4eea5345 ("KVM: arm64: Hide TCR2_EL1 from userspace when disabled for guests") - a68cddbe47ef ("KVM: arm64: Hide S1PIE registers from userspace when disabled for guests") in v6.13. This means if we migrate from an old kernel host to a >= 6.13 kernel host, migration currently fails. Declare cpreg migration tolerance for those registers. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Sebastian Ott <sebott@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20260420140552.104369-5-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu64.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_a53_initfn(Object *obj) define_cortex_a72_a57_a53_cp_reginfo(cpu); } +#if defined(CONFIG_KVM) +static void kvm_arm_set_cpreg_mig_tolerances(ARMCPU *cpu) +{ + /* + * Registers that may be in the incoming stream and not exposed + * on the destination + */ + + /* + * TCR_EL1 was erroneously unconditionnally exposed before linux v6.13. + * See commit 0fcb4eea5345 ("KVM: arm64: Hide TCR2_EL1 from userspace + * when disabled for guests") + */ + arm_register_cpreg_mig_tolerance(cpu, ARM64_SYS_REG(3, 0, 2, 0, 3), + 0, 0, ToleranceNotOnBothEnds); + /* + * PIRE0_EL1 and PIR_EL1 were erroneously unconditionnally exposed + * before linux v6.13. See commit a68cddbe47ef ("KVM: arm64: Hide + * S1PIE registers from userspace when disabled for guests") + */ + arm_register_cpreg_mig_tolerance(cpu, ARM64_SYS_REG(3, 0, 10, 2, 2), + 0, 0, ToleranceNotOnBothEnds); + arm_register_cpreg_mig_tolerance(cpu, ARM64_SYS_REG(3, 0, 10, 2, 3), + 0, 0, ToleranceNotOnBothEnds); +} +#endif + static void aarch64_host_initfn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); @@ -XXX,XX +XXX,XX @@ static void aarch64_host_initfn(Object *obj) #endif #if defined(CONFIG_KVM) + kvm_arm_set_cpreg_mig_tolerances(cpu); kvm_arm_set_cpu_features_from_host(cpu); aarch64_add_sve_properties(obj); #elif defined(CONFIG_HVF) -- 2.43.0 From: Eric Auger <eric.auger@redhat.com> KVM_REG_ARM_VENDOR_HYP_BMAP_2 pseudo FW register is exposed from v6.15 onwards. Backward migration from a >= v6.15 to an older kernel would fail without cpreg migration tolerance definition for this register. If the register is present on source but not on destination, its value must be checked to make sure it matches the reset value, ie. 0, meaning no service is exposed to the guest, hence the choice of a ToleranceOnlySrcTestValue migration tolerance. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20260420140552.104369-6-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu64.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void kvm_arm_set_cpreg_mig_tolerances(ARMCPU *cpu) 0, 0, ToleranceNotOnBothEnds); arm_register_cpreg_mig_tolerance(cpu, ARM64_SYS_REG(3, 0, 10, 2, 3), 0, 0, ToleranceNotOnBothEnds); + + /* + * KVM_REG_ARM_VENDOR_HYP_BMAP_2 pseudo FW register is exposed + * from v6.15 onwards. Backward migration from a >= v6.15 to an older + * kernel would fail without cpreg migration tolerance definition. + * If the register is present on source but not on destination, make + * sure it has its reset value, ie. 0, meaning no service is exposed + * to the guest. + */ + arm_register_cpreg_mig_tolerance(cpu, KVM_REG_ARM_FW_FEAT_BMAP_REG(3), + UINT64_MAX, 0, ToleranceOnlySrcTestValue); } #endif -- 2.43.0 From: Eric Auger <eric.auger@redhat.com> We want to remove AArch32 DBGDTRTX which was erroneously exposed. This was attempted by 655659a74a36b ("target/arm: Correct encoding of Debug Communications Channel registers") but it was discovered that the removal of this debug register broke forward migration on TCG. Now we have the cpreg migration tolerance infrastructure, we can declare one for the DBGDTRTX. This allow to revert the reinstate patch. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Sebastian Ott <sebott@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20260420140552.104369-7-eric.auger@redhat.com [PMM: revised comment, included note about when we can drop the workaround] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .fgt = FGT_CLIDR_EL1, .resetvalue = GET_IDREG(isar, CLIDR) }; + uint64_t dbgtr_el0_kvmidx = + cpreg_to_kvm_id(ENCODE_CP_REG(14, 0, 1, 0, 5, 3, 0)); + define_one_arm_cp_reg(cpu, &clidr); define_arm_cp_regs(cpu, v7_cp_reginfo); define_debug_regs(cpu); + /* + * We used to incorrectly expose a non-existent AArch32 "DBGDTRTX" + * register with this encoding. This has been fixed by commit + * 655659a74a36 ("target/arm: Correct encoding of Debug + * Communications Channel registers") by the introduction of correct + * separate cpreg definitions for AA64 and AA32 versions. However, + * the old cpreg definition couldn't be removed without breaking + * migration, so commit 4f2b82f604 reinstated the bogus encoding + * for migration data only. + * + * Now that we have migration tolerance infrastructure, we can use + * this to allow forward migration from the buggy QEMU versions, + * accepting and ignoring the bogus register if it is in the + * source data. QEMU 11.0 was the last version that sent the + * bogus encoding, so this workaround can be removed at the point + * where we no longer care about migration from that version + * (i.e. when we remove the "virt-11.0" machine type). + */ + arm_register_cpreg_mig_tolerance(cpu, dbgtr_el0_kvmidx, + 0, 0, ToleranceNotOnBothEnds); } else { define_arm_cp_regs(cpu, not_v7_cp_reginfo); } -- 2.43.0 From: Eric Auger <eric.auger@redhat.com> This reverts commit 4f2b82f60431 ("target/arm: Reinstate bogus AArch32 DBGDTRTX register for migration compat). We don't need that commit anymore as the AArch32 DBGDTRTX register is declared to be safe to ignore in the incoming migration stream. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Sebastian Ott <sebott@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20260420140552.104369-8-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/debug_helper.c | 29 ----------------------------- 1 file changed, 29 deletions(-) diff --git a/target/arm/debug_helper.c b/target/arm/debug_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/debug_helper.c +++ b/target/arm/debug_helper.c @@ -XXX,XX +XXX,XX @@ static void dbgclaimclr_write(CPUARMState *env, const ARMCPRegInfo *ri, env->cp15.dbgclaim &= ~(value & 0xFF); } -static CPAccessResult access_bogus(CPUARMState *env, const ARMCPRegInfo *ri, - bool isread) -{ - /* Always UNDEF, as if this cpreg didn't exist */ - return CP_ACCESS_UNDEFINED; -} - static const ARMCPRegInfo debug_cp_reginfo[] = { /* * DBGDRAR, DBGDSAR: always RAZ since we don't implement memory mapped @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo debug_cp_reginfo[] = { .opc0 = 2, .opc1 = 3, .crn = 0, .crm = 4, .opc2 = 0, .access = PL0_RW, .accessfn = access_tdcc, .type = ARM_CP_CONST, .resetvalue = 0 }, - /* - * This is not a real AArch32 register. We used to incorrectly expose - * this due to a QEMU bug; to avoid breaking migration compatibility we - * need to continue to provide it so that we don't fail the inbound - * migration when it tells us about a sysreg that we don't have. - * We set an always-fails .accessfn, which means that the guest doesn't - * actually see this register (it will always UNDEF, identically to if - * there were no cpreg definition for it other than that we won't print - * a LOG_UNIMP message about it), and we set the ARM_CP_NO_GDB flag so the - * gdbstub won't see it either. - * (We can't just set .access = 0, because add_cpreg_to_hashtable() - * helpfully ignores cpregs which aren't accessible to the highest - * implemented EL.) - * - * TODO: implement a system for being able to describe "this register - * can be ignored if it appears in the inbound stream"; then we can - * remove this temporary hack. - */ - { .name = "BOGUS_DBGDTR_EL0", .state = ARM_CP_STATE_AA32, - .cp = 14, .opc1 = 3, .crn = 0, .crm = 5, .opc2 = 0, - .access = PL0_RW, .accessfn = access_bogus, - .type = ARM_CP_CONST | ARM_CP_NO_GDB, .resetvalue = 0 }, /* * OSECCR_EL1 provides a mechanism for an operating system * to access the contents of EDECCR. EDECCR is not implemented though, -- 2.43.0 From: Osama Abdelkader <osama.abdelkader@gmail.com> fdt_node_offset_by_compatible(fdt, -1, compat) only finds the first match. If the blob has more than one node with the same compatible string, extra nodes will remain active. Remove all the matching nodes, using the same loop as imx8mp-evk.c does for this purpose. Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com> Message-id: 20260420162114.308519-1-osama.abdelkader@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/raspi4b.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/hw/arm/raspi4b.c b/hw/arm/raspi4b.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/raspi4b.c +++ b/hw/arm/raspi4b.c @@ -XXX,XX +XXX,XX @@ static void raspi4_modify_dtb(const struct arm_boot_info *info, void *fdt) for (int i = 0; i < ARRAY_SIZE(nodes_to_remove); i++) { const char *dev_str = nodes_to_remove[i]; + int offset; - int offset = fdt_node_offset_by_compatible(fdt, -1, dev_str); - if (offset >= 0) { - if (!fdt_nop_node(fdt, offset)) { - warn_report("bcm2711 dtc: %s has been disabled!", dev_str); + offset = fdt_node_offset_by_compatible(fdt, -1, dev_str); + while (offset >= 0) { + if (fdt_nop_node(fdt, offset) == 0) { + warn_report("bcm2711 dtb: %s has been disabled!", dev_str); } + offset = fdt_node_offset_by_compatible(fdt, offset, dev_str); } } -- 2.43.0 From: Yucai Liu <1486344514@qq.com> Implement a basic i.MX6UL LCDIF controller model with MMIO registers, frame-done interrupt behavior, and framebuffer-backed display updates for RGB565 and XRGB8888 input formats. Place the LCDIF device under hw/display and build it via a dedicated CONFIG_IMX6UL_LCDIF symbol. Model register fields with registerfields.h helpers and provide migration support via vmstate. Signed-off-by: Yucai Liu <1486344514@qq.com> Message-id: 20260412110240.93116-2-yangyanglan718@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 2 + hw/display/Kconfig | 4 + hw/display/imx6ul_lcdif.c | 453 ++++++++++++++++++++++++++++++ hw/display/meson.build | 1 + include/hw/display/imx6ul_lcdif.h | 37 +++ 5 files changed, 497 insertions(+) create mode 100644 hw/display/imx6ul_lcdif.c create mode 100644 include/hw/display/imx6ul_lcdif.h diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ L: qemu-arm@nongnu.org S: Odd Fixes F: hw/arm/mcimx6ul-evk.c F: hw/arm/fsl-imx6ul.c +F: hw/display/imx6ul_lcdif.c F: hw/misc/imx6ul_ccm.c F: include/hw/arm/fsl-imx6ul.h +F: include/hw/display/imx6ul_lcdif.h F: include/hw/misc/imx6ul_ccm.h F: docs/system/arm/mcimx6ul-evk.rst diff --git a/hw/display/Kconfig b/hw/display/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/display/Kconfig +++ b/hw/display/Kconfig @@ -XXX,XX +XXX,XX @@ config PL110 bool select FRAMEBUFFER +config IMX6UL_LCDIF + bool + select FRAMEBUFFER + config SII9022 bool depends on I2C diff --git a/hw/display/imx6ul_lcdif.c b/hw/display/imx6ul_lcdif.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/display/imx6ul_lcdif.c @@ -XXX,XX +XXX,XX @@ +/* + * SPDX-License-Identifier: GPL-2.0-or-later + * + * i.MX6UL LCDIF controller + * + * Copyright (c) 2026 Yucai Liu <1486344514@qq.com> + */ + +#include "qemu/osdep.h" +#include "hw/display/imx6ul_lcdif.h" +#include "hw/core/irq.h" +#include "hw/core/registerfields.h" +#include "hw/display/framebuffer.h" +#include "migration/vmstate.h" +#include "system/address-spaces.h" +#include "qemu/module.h" +#include "qemu/units.h" +#include "ui/pixel_ops.h" + +#define LCDIF_MMIO_SIZE (16 * KiB) +#define LCDIF_RESET_CTRL1 0x000f0000 + +REG32(CTRL, 0x00) + FIELD(CTRL, RUN, 0, 1) + FIELD(CTRL, WORD_LENGTH, 8, 2) +REG32(CTRL1, 0x10) + FIELD(CTRL1, CUR_FRAME_DONE_IRQ, 9, 1) + FIELD(CTRL1, CUR_FRAME_DONE_IRQ_EN, 13, 1) + FIELD(CTRL1, BYTE_PACKING_FORMAT, 16, 4) +REG32(V4_TRANSFER_COUNT, 0x30) + FIELD(V4_TRANSFER_COUNT, H_COUNT, 0, 16) + FIELD(V4_TRANSFER_COUNT, V_COUNT, 16, 16) +REG32(V4_CUR_BUF, 0x40) +REG32(V4_NEXT_BUF, 0x50) +REG32(AS_NEXT_BUF, 0x230) + +#define REG_SET 0x4 +#define REG_CLR 0x8 +#define REG_TOG 0xc + +#define CTRL_WORD_LENGTH_16 0 +#define CTRL_WORD_LENGTH_24 3 + +#define FRAME_PERIOD_NS (16 * 1000 * 1000ULL) + +enum IMX6ULLCDIFReg { + IMX6UL_LCDIF_REG_CTRL = A_CTRL >> 4, + IMX6UL_LCDIF_REG_CTRL1 = A_CTRL1 >> 4, + IMX6UL_LCDIF_REG_V4_TRANSFER_COUNT = A_V4_TRANSFER_COUNT >> 4, + IMX6UL_LCDIF_REG_V4_CUR_BUF = A_V4_CUR_BUF >> 4, + IMX6UL_LCDIF_REG_V4_NEXT_BUF = A_V4_NEXT_BUF >> 4, + IMX6UL_LCDIF_REG_AS_NEXT_BUF = A_AS_NEXT_BUF >> 4, +}; + +static inline bool imx6ul_lcdif_reg_exists(hwaddr reg) +{ + return (reg >> 4) < IMX6UL_LCDIF_REGS_NUM; +} + +static inline bool imx6ul_lcdif_reg_has_setclr(hwaddr reg) +{ + switch (reg) { + case A_CTRL: + case A_CTRL1: + return true; + default: + return false; + } +} + +static inline bool imx6ul_lcdif_is_running(IMX6ULLCDIFState *s) +{ + uint32_t ctrl = s->regs[IMX6UL_LCDIF_REG_CTRL]; + + return FIELD_EX32(ctrl, CTRL, RUN); +} + +static inline bool imx6ul_lcdif_frame_done_pending(IMX6ULLCDIFState *s) +{ + uint32_t ctrl1 = s->regs[IMX6UL_LCDIF_REG_CTRL1]; + + return FIELD_EX32(ctrl1, CTRL1, CUR_FRAME_DONE_IRQ); +} + +static void imx6ul_lcdif_schedule_frame(IMX6ULLCDIFState *s) +{ + int64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + + timer_mod(s->frame_timer, now + FRAME_PERIOD_NS); +} + +static void imx6ul_lcdif_maybe_schedule_frame(IMX6ULLCDIFState *s) +{ + if (imx6ul_lcdif_is_running(s) && !imx6ul_lcdif_frame_done_pending(s)) { + imx6ul_lcdif_schedule_frame(s); + } else { + timer_del(s->frame_timer); + } +} + +static void imx6ul_lcdif_update_irq(IMX6ULLCDIFState *s) +{ + uint32_t ctrl1 = s->regs[IMX6UL_LCDIF_REG_CTRL1]; + bool level = FIELD_EX32(ctrl1, CTRL1, CUR_FRAME_DONE_IRQ_EN) && + FIELD_EX32(ctrl1, CTRL1, CUR_FRAME_DONE_IRQ); + + qemu_set_irq(s->irq, level); +} + +static void imx6ul_lcdif_frame_done(IMX6ULLCDIFState *s) +{ + uint32_t ctrl1 = s->regs[IMX6UL_LCDIF_REG_CTRL1]; + + ctrl1 = FIELD_DP32(ctrl1, CTRL1, CUR_FRAME_DONE_IRQ, 1); + s->regs[IMX6UL_LCDIF_REG_CTRL1] = ctrl1; + imx6ul_lcdif_update_irq(s); +} + +static void imx6ul_lcdif_draw_line_rgb565(void *opaque, uint8_t *dst, + const uint8_t *src, int width, + int dststep) +{ + uint32_t *dst32 = (uint32_t *)dst; + int i; + + for (i = 0; i < width; i++) { + uint16_t pixel = lduw_le_p(src); + uint8_t r = ((pixel >> 11) & 0x1f) << 3; + uint8_t g = ((pixel >> 5) & 0x3f) << 2; + uint8_t b = (pixel & 0x1f) << 3; + + *dst32++ = rgb_to_pixel32(r, g, b); + src += 2; + } +} + +static void imx6ul_lcdif_draw_line_xrgb8888(void *opaque, uint8_t *dst, + const uint8_t *src, int width, + int dststep) +{ + uint32_t *dst32 = (uint32_t *)dst; + int i; + + for (i = 0; i < width; i++) { + uint32_t pixel = ldl_le_p(src); + uint8_t r = (pixel >> 16) & 0xff; + uint8_t g = (pixel >> 8) & 0xff; + uint8_t b = pixel & 0xff; + + *dst32++ = rgb_to_pixel32(r, g, b); + src += 4; + } +} + +static void imx6ul_lcdif_update_display(void *opaque) +{ + IMX6ULLCDIFState *s = opaque; + DisplaySurface *surface = qemu_console_surface(s->con); + uint32_t transfer_count = s->regs[IMX6UL_LCDIF_REG_V4_TRANSFER_COUNT]; + uint32_t width = FIELD_EX32(transfer_count, V4_TRANSFER_COUNT, H_COUNT); + uint32_t height = FIELD_EX32(transfer_count, V4_TRANSFER_COUNT, V_COUNT); + uint32_t ctrl = s->regs[IMX6UL_LCDIF_REG_CTRL]; + uint32_t frame_base = s->regs[IMX6UL_LCDIF_REG_V4_CUR_BUF]; + drawfn fn; + int first = 0; + int last = 0; + int src_width; + + if (!imx6ul_lcdif_is_running(s) || width == 0 || height == 0) { + return; + } + + switch (FIELD_EX32(ctrl, CTRL, WORD_LENGTH)) { + case CTRL_WORD_LENGTH_16: + s->src_bpp = 2; + fn = imx6ul_lcdif_draw_line_rgb565; + break; + case CTRL_WORD_LENGTH_24: + s->src_bpp = 4; + fn = imx6ul_lcdif_draw_line_xrgb8888; + break; + default: + return; + } + + if (surface_width(surface) != width || surface_height(surface) != height) { + qemu_console_resize(s->con, width, height); + surface = qemu_console_surface(s->con); + s->invalidate = true; + } + + src_width = width * s->src_bpp; + if (s->invalidate || s->fb_base != frame_base || + s->src_width != src_width || s->rows != height) { + framebuffer_update_memory_section(&s->fbsection, get_system_memory(), + frame_base, height, src_width); + s->fb_base = frame_base; + s->src_width = src_width; + s->rows = height; + } + + framebuffer_update_display(surface, &s->fbsection, width, height, + src_width, surface_stride(surface), 0, + s->invalidate, fn, s, &first, &last); + if (first >= 0) { + dpy_gfx_update(s->con, 0, first, width, last - first + 1); + } + + s->invalidate = false; +} + +static void imx6ul_lcdif_invalidate_display(void *opaque) +{ + IMX6ULLCDIFState *s = opaque; + + s->invalidate = true; +} + +static const GraphicHwOps imx6ul_lcdif_graphic_ops = { + .invalidate = imx6ul_lcdif_invalidate_display, + .gfx_update = imx6ul_lcdif_update_display, +}; + +static void imx6ul_lcdif_frame_timer_cb(void *opaque) +{ + IMX6ULLCDIFState *s = opaque; + + if (!imx6ul_lcdif_is_running(s) || imx6ul_lcdif_frame_done_pending(s)) { + return; + } + + imx6ul_lcdif_frame_done(s); +} + +static uint64_t imx6ul_lcdif_read(void *opaque, hwaddr offset, unsigned size) +{ + IMX6ULLCDIFState *s = opaque; + hwaddr reg = offset & ~0xf; + uint32_t idx; + + assert(size == 4); + assert(!(offset & 0x3)); + assert(offset < LCDIF_MMIO_SIZE); + + idx = reg >> 4; + if (idx >= ARRAY_SIZE(s->regs)) { + return 0; + } + + return s->regs[idx]; +} + +static void imx6ul_lcdif_write(void *opaque, hwaddr offset, + uint64_t value, unsigned size) +{ + IMX6ULLCDIFState *s = opaque; + hwaddr reg = offset & ~0xf; + uint32_t idx; + uint32_t oldv; + + assert(size == 4); + assert(!(offset & 0x3)); + assert(offset < LCDIF_MMIO_SIZE); + + if (!imx6ul_lcdif_reg_exists(reg)) { + return; + } + + idx = reg >> 4; + oldv = s->regs[idx]; + + switch (offset & 0xf) { + case 0: + s->regs[idx] = (uint32_t)value; + break; + case REG_SET: + if (!imx6ul_lcdif_reg_has_setclr(reg)) { + return; + } + s->regs[idx] = oldv | (uint32_t)value; + break; + case REG_CLR: + if (!imx6ul_lcdif_reg_has_setclr(reg)) { + return; + } + s->regs[idx] = oldv & ~(uint32_t)value; + break; + case REG_TOG: + if (!imx6ul_lcdif_reg_has_setclr(reg)) { + return; + } + s->regs[idx] = oldv ^ (uint32_t)value; + break; + default: + g_assert_not_reached(); + } + + switch (reg) { + case A_CTRL: + if (!FIELD_EX32(oldv, CTRL, RUN) && + FIELD_EX32(s->regs[idx], CTRL, RUN)) { + s->invalidate = true; + graphic_hw_invalidate(s->con); + imx6ul_lcdif_maybe_schedule_frame(s); + break; + } + if (FIELD_EX32(oldv, CTRL, RUN) && + !FIELD_EX32(s->regs[idx], CTRL, RUN)) { + timer_del(s->frame_timer); + } + break; + case A_CTRL1: + if (FIELD_EX32(oldv, CTRL1, CUR_FRAME_DONE_IRQ) && + !FIELD_EX32(s->regs[idx], CTRL1, CUR_FRAME_DONE_IRQ)) { + imx6ul_lcdif_maybe_schedule_frame(s); + } + break; + case A_V4_TRANSFER_COUNT: + s->invalidate = true; + graphic_hw_invalidate(s->con); + break; + case A_V4_CUR_BUF: + s->invalidate = true; + graphic_hw_invalidate(s->con); + break; + case A_V4_NEXT_BUF: + s->regs[IMX6UL_LCDIF_REG_V4_CUR_BUF] = s->regs[idx]; + imx6ul_lcdif_frame_done(s); + s->invalidate = true; + graphic_hw_invalidate(s->con); + imx6ul_lcdif_maybe_schedule_frame(s); + return; + case A_AS_NEXT_BUF: + imx6ul_lcdif_frame_done(s); + imx6ul_lcdif_maybe_schedule_frame(s); + return; + default: + break; + } + + imx6ul_lcdif_update_irq(s); +} + +static const MemoryRegionOps imx6ul_lcdif_ops = { + .read = imx6ul_lcdif_read, + .write = imx6ul_lcdif_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static void imx6ul_lcdif_reset(DeviceState *dev) +{ + IMX6ULLCDIFState *s = IMX6UL_LCDIF(dev); + + memset(s->regs, 0, sizeof(s->regs)); + s->regs[IMX6UL_LCDIF_REG_CTRL1] = LCDIF_RESET_CTRL1; + s->fb_base = 0; + s->src_width = 0; + s->rows = 0; + s->src_bpp = 0; + s->invalidate = true; + timer_del(s->frame_timer); + imx6ul_lcdif_update_irq(s); +} + +static int imx6ul_lcdif_post_load(void *opaque, int version_id) +{ + IMX6ULLCDIFState *s = opaque; + + s->fb_base = 0; + s->src_width = 0; + s->rows = 0; + s->src_bpp = 0; + s->invalidate = true; + + imx6ul_lcdif_update_irq(s); + if (imx6ul_lcdif_is_running(s) && + !imx6ul_lcdif_frame_done_pending(s) && + !timer_pending(s->frame_timer)) { + imx6ul_lcdif_schedule_frame(s); + } + + return 0; +} + +static const VMStateDescription vmstate_imx6ul_lcdif = { + .name = TYPE_IMX6UL_LCDIF, + .version_id = 1, + .minimum_version_id = 1, + .post_load = imx6ul_lcdif_post_load, + .fields = (const VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, IMX6ULLCDIFState, IMX6UL_LCDIF_REGS_NUM), + VMSTATE_TIMER_PTR(frame_timer, IMX6ULLCDIFState), + VMSTATE_END_OF_LIST() + }, +}; + +static void imx6ul_lcdif_realize(DeviceState *dev, Error **errp) +{ + IMX6ULLCDIFState *s = IMX6UL_LCDIF(dev); + + s->frame_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, + imx6ul_lcdif_frame_timer_cb, s); + s->invalidate = true; + memory_region_init_io(&s->iomem, OBJECT(dev), &imx6ul_lcdif_ops, s, + TYPE_IMX6UL_LCDIF, LCDIF_MMIO_SIZE); + sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->iomem); + sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq); + s->con = graphic_console_init(dev, 0, &imx6ul_lcdif_graphic_ops, s); +} + +static void imx6ul_lcdif_unrealize(DeviceState *dev) +{ + IMX6ULLCDIFState *s = IMX6UL_LCDIF(dev); + + timer_del(s->frame_timer); + timer_free(s->frame_timer); + s->frame_timer = NULL; + + if (s->con) { + graphic_console_close(s->con); + s->con = NULL; + } +} + +static void imx6ul_lcdif_class_init(ObjectClass *klass, const void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = imx6ul_lcdif_realize; + dc->unrealize = imx6ul_lcdif_unrealize; + dc->vmsd = &vmstate_imx6ul_lcdif; + device_class_set_legacy_reset(dc, imx6ul_lcdif_reset); + dc->desc = "i.MX6UL LCDIF"; +} + +static const TypeInfo imx6ul_lcdif_info = { + .name = TYPE_IMX6UL_LCDIF, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(IMX6ULLCDIFState), + .class_init = imx6ul_lcdif_class_init, +}; + +static void imx6ul_lcdif_register_types(void) +{ + type_register_static(&imx6ul_lcdif_info); +} + +type_init(imx6ul_lcdif_register_types) diff --git a/hw/display/meson.build b/hw/display/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/display/meson.build +++ b/hw/display/meson.build @@ -XXX,XX +XXX,XX @@ system_ss.add(when: ['CONFIG_VGA_CIRRUS', 'CONFIG_VGA_ISA'], if_true: files('cir system_ss.add(when: 'CONFIG_G364FB', if_true: files('g364fb.c')) system_ss.add(when: 'CONFIG_JAZZ_LED', if_true: files('jazz_led.c')) system_ss.add(when: 'CONFIG_PL110', if_true: files('pl110.c')) +system_ss.add(when: 'CONFIG_IMX6UL_LCDIF', if_true: files('imx6ul_lcdif.c')) system_ss.add(when: 'CONFIG_SII9022', if_true: files('sii9022.c')) system_ss.add(when: 'CONFIG_SSD0303', if_true: files('ssd0303.c')) system_ss.add(when: 'CONFIG_SSD0323', if_true: files('ssd0323.c')) diff --git a/include/hw/display/imx6ul_lcdif.h b/include/hw/display/imx6ul_lcdif.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/display/imx6ul_lcdif.h @@ -XXX,XX +XXX,XX @@ +/* + * SPDX-License-Identifier: GPL-2.0-or-later + * + * i.MX6UL LCDIF controller + * + * Copyright (c) 2026 Yucai Liu <1486344514@qq.com> + */ + +#ifndef IMX6UL_LCDIF_H +#define IMX6UL_LCDIF_H + +#include "hw/core/sysbus.h" +#include "qom/object.h" +#include "qemu/timer.h" +#include "ui/console.h" + +#define TYPE_IMX6UL_LCDIF "imx6ul-lcdif" +#define IMX6UL_LCDIF_REGS_NUM ((0x230 >> 4) + 1) +OBJECT_DECLARE_SIMPLE_TYPE(IMX6ULLCDIFState, IMX6UL_LCDIF) + +struct IMX6ULLCDIFState { + SysBusDevice parent_obj; + + MemoryRegion iomem; + MemoryRegionSection fbsection; + qemu_irq irq; + QemuConsole *con; + QEMUTimer *frame_timer; + uint32_t fb_base; + uint32_t src_width; + uint32_t rows; + uint8_t src_bpp; + bool invalidate; + uint32_t regs[IMX6UL_LCDIF_REGS_NUM]; +}; + +#endif /* IMX6UL_LCDIF_H */ -- 2.43.0 From: Yucai Liu <1486344514@qq.com> Instantiate LCDIF as a child object of the i.MX6UL SoC in init and realize it in the SoC realize path before MMIO/IRQ hookup. Also make FSL_IMX6UL select CONFIG_IMX6UL_LCDIF and map the LCDIF region with a 16 KiB size to match the SoC memory map. Signed-off-by: Yucai Liu <1486344514@qq.com> Message-id: 20260412110240.93116-3-yangyanglan718@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx6ul.c | 12 ++++++++++-- include/hw/arm/fsl-imx6ul.h | 4 +++- 3 files changed, 14 insertions(+), 3 deletions(-) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX6UL imply I2C_DEVICES select A15MPCORE select IMX + select IMX6UL_LCDIF select IMX_FEC select IMX_I2C select IMX_USBPHY diff --git a/hw/arm/fsl-imx6ul.c b/hw/arm/fsl-imx6ul.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx6ul.c +++ b/hw/arm/fsl-imx6ul.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qapi/error.h" #include "hw/arm/fsl-imx6ul.h" +#include "hw/display/imx6ul_lcdif.h" #include "hw/misc/unimp.h" #include "hw/usb/imx-usb-phy.h" #include "hw/core/boards.h" @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) object_initialize_child(obj, name, &s->usb[i], TYPE_CHIPIDEA); } + /* + * LCDIF + */ + object_initialize_child(obj, "lcdif", &s->lcdif, TYPE_IMX6UL_LCDIF); + /* * SDHCIs */ @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) /* * LCD */ - create_unimplemented_device("lcdif", FSL_IMX6UL_LCDIF_ADDR, - FSL_IMX6UL_LCDIF_SIZE); + sysbus_realize(SYS_BUS_DEVICE(&s->lcdif), &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->lcdif), 0, FSL_IMX6UL_LCDIF_ADDR); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->lcdif), 0, + qdev_get_gpio_in(gic, FSL_IMX6UL_LCDIF_IRQ)); /* * CSU diff --git a/include/hw/arm/fsl-imx6ul.h b/include/hw/arm/fsl-imx6ul.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx6ul.h +++ b/include/hw/arm/fsl-imx6ul.h @@ -XXX,XX +XXX,XX @@ #include "hw/net/imx_fec.h" #include "hw/usb/chipidea.h" #include "hw/usb/imx-usb-phy.h" +#include "hw/display/imx6ul_lcdif.h" #include "system/memory.h" #include "target/arm/cpu.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct FslIMX6ULState { IMX2WdtState wdt[FSL_IMX6UL_NUM_WDTS]; IMXUSBPHYState usbphy[FSL_IMX6UL_NUM_USB_PHYS]; ChipideaState usb[FSL_IMX6UL_NUM_USBS]; + IMX6ULLCDIFState lcdif; MemoryRegion rom; MemoryRegion caam; MemoryRegion ocram; @@ -XXX,XX +XXX,XX @@ enum FslIMX6ULMemoryMap { FSL_IMX6UL_PXP_SIZE = (16 * KiB), FSL_IMX6UL_LCDIF_ADDR = 0x021C8000, - FSL_IMX6UL_LCDIF_SIZE = 0x100, + FSL_IMX6UL_LCDIF_SIZE = (16 * KiB), FSL_IMX6UL_CSI_ADDR = 0x021C4000, FSL_IMX6UL_CSI_SIZE = 0x100, -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> We have a registerfields interface which we can use for defining fields alongside helpers to access them. Define the basic syndrome layout and convert the helpers that take the imm16 data directly. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-2-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 75 ++++++++++++++++++++++++++++++++----------- 1 file changed, 57 insertions(+), 18 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ #ifndef TARGET_ARM_SYNDROME_H #define TARGET_ARM_SYNDROME_H -#include "qemu/bitops.h" +#include "hw/core/registerfields.h" /* Valid Syndrome Register EC field values */ enum arm_exception_class { @@ -XXX,XX +XXX,XX @@ enum arm_exception_class { EC_AA64_BKPT = 0x3c, }; +/* Generic syndrome encoding layout for HSR and lower 32 bits of ESR_EL2 */ +FIELD(SYNDROME, EC, 26, 6) +FIELD(SYNDROME, IL, 25, 1) +FIELD(SYNDROME, ISS, 0, 25) + typedef enum { SME_ET_AccessTrap, SME_ET_Streaming, @@ -XXX,XX +XXX,XX @@ typedef enum { static inline uint32_t syn_get_ec(uint32_t syn) { - return syn >> ARM_EL_EC_SHIFT; + return FIELD_EX32(syn, SYNDROME, EC); } static inline uint32_t syn_set_ec(uint32_t syn, uint32_t ec) { - return deposit32(syn, ARM_EL_EC_SHIFT, ARM_EL_EC_LENGTH, ec); + return FIELD_DP32(syn, SYNDROME, EC, ec); } /* @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_set_ec(uint32_t syn, uint32_t ec) */ static inline uint32_t syn_uncategorized(void) { - return (EC_UNCATEGORIZED << ARM_EL_EC_SHIFT) | ARM_EL_IL; + uint32_t res = syn_set_ec(0, EC_UNCATEGORIZED); + res = FIELD_DP32(res, SYNDROME, IL, 1); + return res; } +FIELD(ISS_IMM16, IMM16, 0, 16) + static inline uint32_t syn_aa64_svc(uint32_t imm16) { - return (EC_AA64_SVC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); + uint32_t res = syn_set_ec(0, EC_AA64_SVC); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); + return res; } static inline uint32_t syn_aa64_hvc(uint32_t imm16) { - return (EC_AA64_HVC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); + uint32_t res = syn_set_ec(0, EC_AA64_HVC); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); + return res; } static inline uint32_t syn_aa64_smc(uint32_t imm16) { - return (EC_AA64_SMC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); + uint32_t res = syn_set_ec(0, EC_AA64_SMC); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); + return res; } static inline uint32_t syn_aa32_svc(uint32_t imm16, bool is_16bit) { - return (EC_AA32_SVC << ARM_EL_EC_SHIFT) | (imm16 & 0xffff) - | (is_16bit ? 0 : ARM_EL_IL); + uint32_t res = syn_set_ec(0, EC_AA32_SVC); + res = FIELD_DP32(res, SYNDROME, IL, is_16bit ? 0 : 1); + res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); + return res; } static inline uint32_t syn_aa32_hvc(uint32_t imm16) { - return (EC_AA32_HVC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); + uint32_t res = syn_set_ec(0, EC_AA32_HVC); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); + return res; } static inline uint32_t syn_aa32_smc(void) { - return (EC_AA32_SMC << ARM_EL_EC_SHIFT) | ARM_EL_IL; + uint32_t res = syn_set_ec(0, EC_AA32_SMC); + res = FIELD_DP32(res, SYNDROME, IL, 1); + return res; } static inline uint32_t syn_aa64_bkpt(uint32_t imm16) { - return (EC_AA64_BKPT << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); + uint32_t res = syn_set_ec(0, EC_AA64_BKPT); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); + return res; } static inline uint32_t syn_aa32_bkpt(uint32_t imm16, bool is_16bit) { - return (EC_AA32_BKPT << ARM_EL_EC_SHIFT) | (imm16 & 0xffff) - | (is_16bit ? 0 : ARM_EL_IL); + uint32_t res = syn_set_ec(0, EC_AA32_BKPT); + res = FIELD_DP32(res, SYNDROME, IL, is_16bit ? 0 : 1); + res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); + return res; } static inline uint32_t syn_aa64_sysregtrap(int op0, int op1, int op2, @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_simd_access_trap(int cv, int cond, bool is_16bit) static inline uint32_t syn_sve_access_trap(void) { - return (EC_SVEACCESSTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL; + uint32_t res = syn_set_ec(0, EC_SVEACCESSTRAP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + return res; } /* @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit) static inline uint32_t syn_illegalstate(void) { - return (EC_ILLEGALSTATE << ARM_EL_EC_SHIFT) | ARM_EL_IL; + uint32_t res = syn_set_ec(0, EC_ILLEGALSTATE); + res = FIELD_DP32(res, SYNDROME, IL, 1); + return res; } static inline uint32_t syn_pcalignment(void) { - return (EC_PCALIGNMENT << ARM_EL_EC_SHIFT) | ARM_EL_IL; + uint32_t res = syn_set_ec(0, EC_PCALIGNMENT); + res = FIELD_DP32(res, SYNDROME, IL, 1); + return res; } static inline uint32_t syn_gcs_data_check(GCSInstructionType it, int rn) @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_gcs_gcsstr(int ra, int rn) static inline uint32_t syn_serror(uint32_t extra) { - return (EC_SERROR << ARM_EL_EC_SHIFT) | ARM_EL_IL | extra; + uint32_t res = syn_set_ec(0, EC_SERROR); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, SYNDROME, ISS, extra); + return res; } static inline uint32_t syn_mop(bool is_set, bool is_setg, int options, -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Migrate syn_aa64_sysregtrap and co-processor register trap syndromes to the registerfields API. The co-processor syndromes are split between single and duel register moves. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-3-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 124 ++++++++++++++++++++++++++++++++++-------- 1 file changed, 102 insertions(+), 22 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ enum arm_exception_class { /* Generic syndrome encoding layout for HSR and lower 32 bits of ESR_EL2 */ FIELD(SYNDROME, EC, 26, 6) -FIELD(SYNDROME, IL, 25, 1) +FIELD(SYNDROME, IL, 25, 1) /* IL=1 for 32 bit instructions */ FIELD(SYNDROME, ISS, 0, 25) typedef enum { @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_aa64_smc(uint32_t imm16) static inline uint32_t syn_aa32_svc(uint32_t imm16, bool is_16bit) { uint32_t res = syn_set_ec(0, EC_AA32_SVC); - res = FIELD_DP32(res, SYNDROME, IL, is_16bit ? 0 : 1); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); return res; } @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_aa64_bkpt(uint32_t imm16) static inline uint32_t syn_aa32_bkpt(uint32_t imm16, bool is_16bit) { uint32_t res = syn_set_ec(0, EC_AA32_BKPT); - res = FIELD_DP32(res, SYNDROME, IL, is_16bit ? 0 : 1); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); return res; } +/* + * ISS encoding for an exception from MSR, MRS, or System instruction + * in AArch64 state. + */ +FIELD(SYSREG_ISS, ISREAD, 0, 1) /* Direction, 1 is read */ +FIELD(SYSREG_ISS, CRM, 1, 4) +FIELD(SYSREG_ISS, RT, 5, 5) +FIELD(SYSREG_ISS, CRN, 10, 4) +FIELD(SYSREG_ISS, OP1, 14, 3) +FIELD(SYSREG_ISS, OP2, 17, 3) +FIELD(SYSREG_ISS, OP0, 20, 2) + static inline uint32_t syn_aa64_sysregtrap(int op0, int op1, int op2, int crn, int crm, int rt, int isread) { - return (EC_SYSTEMREGISTERTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL - | (op0 << 20) | (op2 << 17) | (op1 << 14) | (crn << 10) | (rt << 5) - | (crm << 1) | isread; + uint32_t res = syn_set_ec(0, EC_SYSTEMREGISTERTRAP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, SYSREG_ISS, OP0, op0); + res = FIELD_DP32(res, SYSREG_ISS, OP2, op2); + res = FIELD_DP32(res, SYSREG_ISS, OP1, op1); + res = FIELD_DP32(res, SYSREG_ISS, CRN, crn); + res = FIELD_DP32(res, SYSREG_ISS, RT, rt); + res = FIELD_DP32(res, SYSREG_ISS, CRM, crm); + res = FIELD_DP32(res, SYSREG_ISS, ISREAD, isread); + + return res; } +/* + * ISS encoding for an exception from an MCR or MRC access + * (move to/from co-processor) + */ +FIELD(COPROC_ISS, ISREAD, 0, 1) +FIELD(COPROC_ISS, CRM, 1, 4) +FIELD(COPROC_ISS, RT, 5, 5) +FIELD(COPROC_ISS, CRN, 10, 4) +FIELD(COPROC_ISS, OP1, 14, 3) +FIELD(COPROC_ISS, OP2, 17, 3) +FIELD(COPROC_ISS, COND, 20, 4) +FIELD(COPROC_ISS, CV, 24, 1) + static inline uint32_t syn_cp14_rt_trap(int cv, int cond, int opc1, int opc2, int crn, int crm, int rt, int isread, bool is_16bit) { - return (EC_CP14RTTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | (opc2 << 17) | (opc1 << 14) - | (crn << 10) | (rt << 5) | (crm << 1) | isread; + uint32_t res = syn_set_ec(0, EC_CP14RTTRAP); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); + + res = FIELD_DP32(res, COPROC_ISS, CV, cv); + res = FIELD_DP32(res, COPROC_ISS, COND, cond); + res = FIELD_DP32(res, COPROC_ISS, OP2, opc2); + res = FIELD_DP32(res, COPROC_ISS, OP1, opc1); + res = FIELD_DP32(res, COPROC_ISS, CRN, crn); + res = FIELD_DP32(res, COPROC_ISS, RT, rt); + res = FIELD_DP32(res, COPROC_ISS, CRM, crm); + res = FIELD_DP32(res, COPROC_ISS, ISREAD, isread); + + return res; } static inline uint32_t syn_cp15_rt_trap(int cv, int cond, int opc1, int opc2, int crn, int crm, int rt, int isread, bool is_16bit) { - return (EC_CP15RTTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | (opc2 << 17) | (opc1 << 14) - | (crn << 10) | (rt << 5) | (crm << 1) | isread; + uint32_t res = syn_set_ec(0, EC_CP15RTTRAP); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); + + res = FIELD_DP32(res, COPROC_ISS, CV, cv); + res = FIELD_DP32(res, COPROC_ISS, COND, cond); + res = FIELD_DP32(res, COPROC_ISS, OP2, opc2); + res = FIELD_DP32(res, COPROC_ISS, OP1, opc1); + res = FIELD_DP32(res, COPROC_ISS, CRN, crn); + res = FIELD_DP32(res, COPROC_ISS, RT, rt); + res = FIELD_DP32(res, COPROC_ISS, CRM, crm); + res = FIELD_DP32(res, COPROC_ISS, ISREAD, isread); + + return res; } +/* + * ISS encoding for an exception from an MCRR or MRRC access + * (move to/from co-processor with 2 regs) + */ +FIELD(COPROC_R2_ISS, ISREAD, 0, 1) +FIELD(COPROC_R2_ISS, CRM, 1, 4) +FIELD(COPROC_R2_ISS, RT, 5, 5) +FIELD(COPROC_R2_ISS, RT2, 10, 5) +FIELD(COPROC_R2_ISS, OP1, 16, 4) +FIELD(COPROC_R2_ISS, COND, 20, 4) +FIELD(COPROC_R2_ISS, CV, 24, 1) + static inline uint32_t syn_cp14_rrt_trap(int cv, int cond, int opc1, int crm, int rt, int rt2, int isread, bool is_16bit) { - return (EC_CP14RRTTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | (opc1 << 16) - | (rt2 << 10) | (rt << 5) | (crm << 1) | isread; + uint32_t res = syn_set_ec(0, EC_CP14RRTTRAP); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); + + res = FIELD_DP32(res, COPROC_R2_ISS, CV, cv); + res = FIELD_DP32(res, COPROC_R2_ISS, COND, cond); + res = FIELD_DP32(res, COPROC_R2_ISS, OP1, opc1); + res = FIELD_DP32(res, COPROC_R2_ISS, RT2, rt2); + res = FIELD_DP32(res, COPROC_R2_ISS, RT, rt); + res = FIELD_DP32(res, COPROC_R2_ISS, CRM, crm); + res = FIELD_DP32(res, COPROC_R2_ISS, ISREAD, isread); + + return res; } static inline uint32_t syn_cp15_rrt_trap(int cv, int cond, int opc1, int crm, int rt, int rt2, int isread, bool is_16bit) { - return (EC_CP15RRTTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | (opc1 << 16) - | (rt2 << 10) | (rt << 5) | (crm << 1) | isread; + uint32_t res = syn_set_ec(0, EC_CP15RRTTRAP); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); + + res = FIELD_DP32(res, COPROC_R2_ISS, CV, cv); + res = FIELD_DP32(res, COPROC_R2_ISS, COND, cond); + res = FIELD_DP32(res, COPROC_R2_ISS, OP1, opc1); + res = FIELD_DP32(res, COPROC_R2_ISS, RT2, rt2); + res = FIELD_DP32(res, COPROC_R2_ISS, RT, rt); + res = FIELD_DP32(res, COPROC_R2_ISS, CRM, crm); + res = FIELD_DP32(res, COPROC_R2_ISS, ISREAD, isread); + + return res; } static inline uint32_t syn_fp_access_trap(int cv, int cond, bool is_16bit, -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> The syn_simd_access trap was never used so remove it. We should only see the COPROC encoding on v7 architectures. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-4-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 25 +++++++++++++++---------- 1 file changed, 15 insertions(+), 10 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_cp15_rrt_trap(int cv, int cond, int opc1, int crm, return res; } +/* + * ISS encoding for an exception from an access to a register of + * instruction resulting from the FPEN or TFP traps. + */ +FIELD(FP_ISS, COPROC, 0, 4) /* ARMv7 only */ +FIELD(FP_ISS, COND, 20, 4) +FIELD(FP_ISS, CV, 24, 1) + static inline uint32_t syn_fp_access_trap(int cv, int cond, bool is_16bit, int coproc) { /* AArch32 FP trap or any AArch64 FP/SIMD trap: TA == 0 */ - return (EC_ADVSIMDFPACCESSTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | coproc; -} + uint32_t res = syn_set_ec(0, EC_ADVSIMDFPACCESSTRAP); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); -static inline uint32_t syn_simd_access_trap(int cv, int cond, bool is_16bit) -{ - /* AArch32 SIMD trap: TA == 1 coproc == 0 */ - return (EC_ADVSIMDFPACCESSTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | (1 << 5); + res = FIELD_DP32(res, FP_ISS, CV, cv); + res = FIELD_DP32(res, FP_ISS, COND, cond); + res = FIELD_DP32(res, FP_ISS, COPROC, coproc); + + return res; } static inline uint32_t syn_sve_access_trap(void) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> For simplicity keep the OP as a two bit field rather than the two interlinked fields in the docs (ERET/ERETA). Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-5-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_sve_access_trap(void) } /* + * ISS encoding for an exception from an ERET, ERETAA or ERETAB + * instructions. + * * eret_op is bits [1:0] of the ERET instruction, so: * 0 for ERET, 2 for ERETAA, 3 for ERETAB. */ +FIELD(ERET_ISS, OP, 0, 2) + static inline uint32_t syn_erettrap(int eret_op) { - return (EC_ERETTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL | eret_op; + uint32_t res = syn_set_ec(0, EC_ERETTRAP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, ERET_ISS, OP, eret_op); + + return res; } static inline uint32_t syn_smetrap(SMEExceptionType etype, bool is_16bit) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-6-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_erettrap(int eret_op) return res; } +/* + * ISS encoding for an exception due to SME functionality + */ +FIELD(SME_ISS, SMTC, 0, 2) + static inline uint32_t syn_smetrap(SMEExceptionType etype, bool is_16bit) { - return (EC_SMETRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) | etype; + uint32_t res = syn_set_ec(0, EC_SMETRAP); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); + res = FIELD_DP32(res, SME_ISS, SMTC, etype); + + return res; } static inline uint32_t syn_pacfail(bool data, int keynumber) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> syn_pactrap is fairly simple as the ISS is all RES0. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-7-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 23 ++++++++++++++++++++--- 1 file changed, 20 insertions(+), 3 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_smetrap(SMEExceptionType etype, bool is_16bit) return res; } +/* + * ISS encoding for a PAC Fail exceptions + */ +FIELD(PACFAIL_ISS, BnA, 0, 1) /* B key or A key */ +FIELD(PACFAIL_ISS, DnI, 1, 1) /* Data or Instruction */ + static inline uint32_t syn_pacfail(bool data, int keynumber) { - int error_code = (data << 1) | keynumber; - return (EC_PACFAIL << ARM_EL_EC_SHIFT) | ARM_EL_IL | error_code; + uint32_t res = syn_set_ec(0, EC_PACFAIL); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, PACFAIL_ISS, DnI, data); + res = FIELD_DP32(res, PACFAIL_ISS, BnA, keynumber); + + return res; } +/* + * ISS encoding for an exception from a trapped Pointer + * Authentication instruction is RES0 + */ static inline uint32_t syn_pactrap(void) { - return (EC_PACTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL; + uint32_t res = syn_set_ec(0, EC_PACTRAP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + return res; } static inline uint32_t syn_btitrap(int btype) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-8-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_pactrap(void) return res; } +/* + * ISS encoding for an exception from a Branch Target Identification + * instruction. + */ +FIELD(BTI_ISS, BTYPE, 0, 2) + static inline uint32_t syn_btitrap(int btype) { - return (EC_BTITRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL | btype; + uint32_t res = syn_set_ec(0, EC_BTITRAP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, BTI_ISS, BTYPE, btype); + return res; } static inline uint32_t syn_bxjtrap(int cv, int cond, int rm) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> This is an Armv7 specific syndrome for chips with Jazelle functionality. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-9-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_btitrap(int btype) return res; } +/* + * ISS encoding for trapped BXJ execution + * + * This is an Armv7 encoding. + */ +FIELD(BXJ_ISS, RM, 0, 4) +/* bits 4:19 are Reserved, UNK/SBZP */ +FIELD(BXJ_ISS, COND, 20, 4) +FIELD(BXJ_ISS, CV, 24, 1) + static inline uint32_t syn_bxjtrap(int cv, int cond, int rm) { - return (EC_BXJTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL | - (cv << 24) | (cond << 20) | rm; + uint32_t res = syn_set_ec(0, EC_BXJTRAP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, BXJ_ISS, CV, cv); + res = FIELD_DP32(res, BXJ_ISS, COND, cond); + res = FIELD_DP32(res, BXJ_ISS, RM, rm); + + return res; } static inline uint32_t syn_gpc(int s2ptw, int ind, int gpcsc, int vncr, -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-10-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 30 +++++++++++++++++++++++++++--- 1 file changed, 27 insertions(+), 3 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_bxjtrap(int cv, int cond, int rm) return res; } +/* + * ISS encoding for a Granule Protection Check exception + * + * These are only reported to EL3 + */ +FIELD(GPC_ISS, xFSC, 0, 6) +FIELD(GPC_ISS, WnR, 6, 1) /* Write not Read */ +FIELD(GPC_ISS, S1PTW, 7, 1) +FIELD(GPC_ISS, CM, 8, 1) +FIELD(GPC_ISS, VNCR, 13, 1) +FIELD(GPC_ISS, GPCSC, 14, 6) +FIELD(GPC_ISS, InD, 20, 1) /* Instruction not Data access */ +FIELD(GPC_ISS, S2PTW, 21, 1) + static inline uint32_t syn_gpc(int s2ptw, int ind, int gpcsc, int vncr, int cm, int s1ptw, int wnr, int fsc) { - return (EC_GPC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (s2ptw << 21) - | (ind << 20) | (gpcsc << 14) | (vncr << 13) | (cm << 8) - | (s1ptw << 7) | (wnr << 6) | fsc; + uint32_t res = syn_set_ec(0, EC_GPC); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, GPC_ISS, S2PTW, s2ptw); + res = FIELD_DP32(res, GPC_ISS, InD, ind); + res = FIELD_DP32(res, GPC_ISS, GPCSC, gpcsc); + res = FIELD_DP32(res, GPC_ISS, VNCR, vncr); + res = FIELD_DP32(res, GPC_ISS, CM, cm); + res = FIELD_DP32(res, GPC_ISS, S1PTW, s1ptw); + res = FIELD_DP32(res, GPC_ISS, WnR, wnr); + res = FIELD_DP32(res, GPC_ISS, xFSC, fsc); + + return res; } static inline uint32_t syn_insn_abort(int same_el, int ea, int s1ptw, int fsc) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Migrate syn_insn_abort and syn_data_abort_* to the registerfields API. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20260422125250.1303100-11-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 87 ++++++++++++++++++++++++++++++++++++------- 1 file changed, 74 insertions(+), 13 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_gpc(int s2ptw, int ind, int gpcsc, int vncr, return res; } +/* + * ISS encoding for an exception from an Instruction Abort + * + * (aka instruction abort) + */ +FIELD(IABORT_ISS, IFSC, 0, 6) +FIELD(IABORT_ISS, S1PTW, 7, 1) +FIELD(IABORT_ISS, EA, 9, 1) +FIELD(IABORT_ISS, FnV, 10, 1) /* FAR not Valid */ +FIELD(IABORT_ISS, SET, 11, 2) +FIELD(IABORT_ISS, PFV, 14, 1) +FIELD(IABORT_ISS, TopLevel, 21, 1) /* FEAT_THE */ + static inline uint32_t syn_insn_abort(int same_el, int ea, int s1ptw, int fsc) { - return (EC_INSNABORT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | ARM_EL_IL | (ea << 9) | (s1ptw << 7) | fsc; + uint32_t res = syn_set_ec(0, EC_INSNABORT + same_el); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, IABORT_ISS, EA, ea); + res = FIELD_DP32(res, IABORT_ISS, S1PTW, s1ptw); + res = FIELD_DP32(res, IABORT_ISS, IFSC, fsc); + + return res; } +/* + * ISS encoding for an exception from a Data Abort + */ +FIELD(DABORT_ISS, DFSC, 0, 6) +FIELD(DABORT_ISS, WNR, 6, 1) +FIELD(DABORT_ISS, S1PTW, 7, 1) +FIELD(DABORT_ISS, CM, 8, 1) +FIELD(DABORT_ISS, EA, 9, 1) +FIELD(DABORT_ISS, FnV, 10, 1) +FIELD(DABORT_ISS, LST, 11, 2) +FIELD(DABORT_ISS, VNCR, 13, 1) +FIELD(DABORT_ISS, AR, 14, 1) +FIELD(DABORT_ISS, SF, 15, 1) +FIELD(DABORT_ISS, SRT, 16, 5) +FIELD(DABORT_ISS, SSE, 21, 1) +FIELD(DABORT_ISS, SAS, 22, 2) +FIELD(DABORT_ISS, ISV, 24, 1) + static inline uint32_t syn_data_abort_no_iss(int same_el, int fnv, int ea, int cm, int s1ptw, int wnr, int fsc) { - return (EC_DATAABORT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | ARM_EL_IL - | (fnv << 10) | (ea << 9) | (cm << 8) | (s1ptw << 7) - | (wnr << 6) | fsc; + uint32_t res = syn_set_ec(0, EC_DATAABORT + same_el); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, DABORT_ISS, FnV, fnv); + res = FIELD_DP32(res, DABORT_ISS, EA, ea); + res = FIELD_DP32(res, DABORT_ISS, CM, cm); + res = FIELD_DP32(res, DABORT_ISS, S1PTW, s1ptw); + res = FIELD_DP32(res, DABORT_ISS, WNR, wnr); + res = FIELD_DP32(res, DABORT_ISS, DFSC, fsc); + + return res; } static inline uint32_t syn_data_abort_with_iss(int same_el, @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_data_abort_with_iss(int same_el, int wnr, int fsc, bool is_16bit) { - return (EC_DATAABORT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | ARM_EL_ISV | (sas << 22) | (sse << 21) | (srt << 16) - | (sf << 15) | (ar << 14) - | (ea << 9) | (cm << 8) | (s1ptw << 7) | (wnr << 6) | fsc; + uint32_t res = syn_set_ec(0, EC_DATAABORT + same_el); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); + + res = FIELD_DP32(res, DABORT_ISS, ISV, 1); + res = FIELD_DP32(res, DABORT_ISS, SAS, sas); + res = FIELD_DP32(res, DABORT_ISS, SSE, sse); + res = FIELD_DP32(res, DABORT_ISS, SRT, srt); + res = FIELD_DP32(res, DABORT_ISS, SF, sf); + res = FIELD_DP32(res, DABORT_ISS, AR, ar); + res = FIELD_DP32(res, DABORT_ISS, EA, ea); + res = FIELD_DP32(res, DABORT_ISS, CM, cm); + res = FIELD_DP32(res, DABORT_ISS, S1PTW, s1ptw); + res = FIELD_DP32(res, DABORT_ISS, WNR, wnr); + res = FIELD_DP32(res, DABORT_ISS, DFSC, fsc); + + return res; } /* @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_data_abort_with_iss(int same_el, */ static inline uint32_t syn_data_abort_vncr(int ea, int wnr, int fsc) { - return (EC_DATAABORT << ARM_EL_EC_SHIFT) | (1 << ARM_EL_EC_SHIFT) - | ARM_EL_IL | ARM_EL_VNCR | (wnr << 6) | fsc; + uint32_t res = syn_set_ec(0, EC_DATAABORT_SAME_EL); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, DABORT_ISS, VNCR, 1); + res = FIELD_DP32(res, DABORT_ISS, WNR, wnr); + res = FIELD_DP32(res, DABORT_ISS, DFSC, fsc); + + return res; } static inline uint32_t syn_swstep(int same_el, int isv, int ex) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Migrate syn_swstep, syn_watchpoint and syn_breakpoint to the registerfields API. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-12-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 54 ++++++++++++++++++++++++++++++++++++++----- 1 file changed, 48 insertions(+), 6 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_data_abort_vncr(int ea, int wnr, int fsc) return res; } +/* + * ISS encoding for an exception from a Software Step exception. + */ +FIELD(SOFTSTEP_ISS, IFSC, 0, 6) +FIELD(SOFTSTEP_ISS, EX, 6, 1) +FIELD(SOFTSTEP_ISS, ISV, 24, 1) + static inline uint32_t syn_swstep(int same_el, int isv, int ex) { - return (EC_SOFTWARESTEP << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | ARM_EL_IL | (isv << 24) | (ex << 6) | 0x22; + uint32_t res = syn_set_ec(0, EC_SOFTWARESTEP + same_el); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, SOFTSTEP_ISS, ISV, isv); + res = FIELD_DP32(res, SOFTSTEP_ISS, EX, ex); + res = FIELD_DP32(res, SOFTSTEP_ISS, IFSC, 0x22); + + return res; } +/* + * ISS encoding for an exception from a Watchpoint exception + */ +FIELD(WATCHPOINT_ISS, DFSC, 0, 6) +FIELD(WATCHPOINT_ISS, WNR, 6, 1) +FIELD(WATCHPOINT_ISS, CM, 8, 1) +FIELD(WATCHPOINT_ISS, FnV, 10, 1) +FIELD(WATCHPOINT_ISS, VNCR, 13, 1) /* FEAT_NV2 */ +FIELD(WATCHPOINT_ISS, FnP, 15, 1) +FIELD(WATCHPOINT_ISS, WPF, 16, 1) +/* bellow mandatory from FEAT_Debugv8p9 */ +FIELD(WATCHPOINT_ISS, WPTV, 17, 1) /* FEAT_Debugv8p2 - WPT valid */ +FIELD(WATCHPOINT_ISS, WPT, 18, 6) /* FEAT_Debugv8p2 - missing WP number */ + static inline uint32_t syn_watchpoint(int same_el, int cm, int wnr) { - return (EC_WATCHPOINT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | ARM_EL_IL | (cm << 8) | (wnr << 6) | 0x22; + uint32_t res = syn_set_ec(0, EC_WATCHPOINT + same_el); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, WATCHPOINT_ISS, CM, cm); + res = FIELD_DP32(res, WATCHPOINT_ISS, WNR, wnr); + res = FIELD_DP32(res, WATCHPOINT_ISS, DFSC, 0x22); + + return res; } +/* + * ISS encoding for an exception from a Breakpoint or a Vector Catch + * debug exception. + */ +FIELD(BREAKPOINT_ISS, IFSC, 0, 6) + static inline uint32_t syn_breakpoint(int same_el) { - return (EC_BREAKPOINT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | ARM_EL_IL | 0x22; + uint32_t res = syn_set_ec(0, EC_BREAKPOINT + same_el); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, BREAKPOINT_ISS, IFSC, 0x22); + + return res; } static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> This will help later when we expand the fields we report. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-13-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_breakpoint(int same_el) return res; } +/* + * ISS encoding for an exception from a WF* instruction + */ +FIELD(WFX_ISS, TI, 0, 2) +FIELD(WFX_ISS, RV, 2, 1) +FIELD(WFX_ISS, RN, 5, 5) +FIELD(WFX_ISS, COND, 20, 4) +FIELD(WFX_ISS, CV, 24, 1) + static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit) { - return (EC_WFX_TRAP << ARM_EL_EC_SHIFT) | - (is_16bit ? 0 : (1 << ARM_EL_IL_SHIFT)) | - (cv << 24) | (cond << 20) | ti; + uint32_t res = syn_set_ec(0, EC_WFX_TRAP); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); + + res = FIELD_DP32(res, WFX_ISS, CV, cv); + res = FIELD_DP32(res, WFX_ISS, COND, cond); + res = FIELD_DP32(res, WFX_ISS, TI, ti); + + return res; } static inline uint32_t syn_illegalstate(void) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Tweak arg names to make it clear raddr is the data address register number. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-14-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 39 +++++++++++++++++++++++++++++++++------ 1 file changed, 33 insertions(+), 6 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_pcalignment(void) return res; } +/* + * ISS encoding for a GCS exception + * + * Field validity depends on EXTYPE + */ +FIELD(GCS_ISS, IT, 0, 5) +FIELD(GCS_ISS, RN, 5, 5) /* only for non EXLOCK exceptions */ +FIELD(GCS_ISS, RADDR, 10, 5) /* only for GCSSTR/GCSSTTR traps */ +FIELD(GCS_ISS, EXTYPE, 20, 4) + static inline uint32_t syn_gcs_data_check(GCSInstructionType it, int rn) { - return ((EC_GCS << ARM_EL_EC_SHIFT) | ARM_EL_IL | - (GCS_ET_DataCheck << 20) | (rn << 5) | it); + uint32_t res = syn_set_ec(0, EC_GCS); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, GCS_ISS, EXTYPE, GCS_ET_DataCheck); + res = FIELD_DP32(res, GCS_ISS, RN, rn); + res = FIELD_DP32(res, GCS_ISS, IT, it); + + return res; } static inline uint32_t syn_gcs_exlock(void) { - return (EC_GCS << ARM_EL_EC_SHIFT) | ARM_EL_IL | (GCS_ET_EXLOCK << 20); + uint32_t res = syn_set_ec(0, EC_GCS); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, GCS_ISS, EXTYPE, GCS_ET_EXLOCK); + + return res; } -static inline uint32_t syn_gcs_gcsstr(int ra, int rn) +static inline uint32_t syn_gcs_gcsstr(int raddr, int rn) { - return ((EC_GCS << ARM_EL_EC_SHIFT) | ARM_EL_IL | - (GCS_ET_GCSSTR_GCSSTTR << 20) | (ra << 10) | (rn << 5)); + uint32_t res = syn_set_ec(0, EC_GCS); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, GCS_ISS, EXTYPE, GCS_ET_GCSSTR_GCSSTTR); + res = FIELD_DP32(res, GCS_ISS, RADDR, raddr); + res = FIELD_DP32(res, GCS_ISS, RN, rn); + + return res; } static inline uint32_t syn_serror(uint32_t extra) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-15-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 33 +++++++++++++++++++++++++++++---- 1 file changed, 29 insertions(+), 4 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_serror(uint32_t extra) return res; } +/* + * ISS encoding for an exception from the Memory Copy and Memory Set + * instructions. + */ +FIELD(MOP_ISS, SIZEREG, 0, 5) +FIELD(MOP_ISS, SRCREG, 5, 5) +FIELD(MOP_ISS, DESTREG, 10, 5) +FIELD(MOP_ISS, FORMATOPT, 16, 2) +FIELD(MOP_ISS, OPT_A, 16, 1) +FIELD(MOP_ISS, WRONG_OPT, 17, 1) +FIELD(MOP_ISS, EPILOGUE, 18, 1) +FIELD(MOP_ISS, OPTIONS, 19, 4) +FIELD(MOP_ISS, IS_SETG, 23, 1) +FIELD(MOP_ISS, MEMINST, 24, 1) + static inline uint32_t syn_mop(bool is_set, bool is_setg, int options, bool epilogue, bool wrong_option, bool option_a, int destreg, int srcreg, int sizereg) { - return (EC_MOP << ARM_EL_EC_SHIFT) | ARM_EL_IL | - (is_set << 24) | (is_setg << 23) | (options << 19) | - (epilogue << 18) | (wrong_option << 17) | (option_a << 16) | - (destreg << 10) | (srcreg << 5) | sizereg; + uint32_t res = syn_set_ec(0, EC_MOP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, MOP_ISS, MEMINST, is_set); + res = FIELD_DP32(res, MOP_ISS, IS_SETG, is_setg); + res = FIELD_DP32(res, MOP_ISS, OPTIONS, options); + res = FIELD_DP32(res, MOP_ISS, EPILOGUE, epilogue); + res = FIELD_DP32(res, MOP_ISS, WRONG_OPT, wrong_option); + res = FIELD_DP32(res, MOP_ISS, OPT_A, option_a); + res = FIELD_DP32(res, MOP_ISS, DESTREG, destreg); + res = FIELD_DP32(res, MOP_ISS, SRCREG, srcreg); + res = FIELD_DP32(res, MOP_ISS, SIZEREG, sizereg); + + return res; } -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> It shares the same COPROC_ISS encoding as the other CP traps although not all the fields are used. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-16-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 16 ++++++++++++++++ target/arm/tcg/vfp_helper.c | 5 +---- 2 files changed, 17 insertions(+), 4 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ FIELD(COPROC_ISS, OP2, 17, 3) FIELD(COPROC_ISS, COND, 20, 4) FIELD(COPROC_ISS, CV, 24, 1) +static inline uint32_t syn_cp10_rt_trap(int cv, int cond, int opc1, + int crn, int rt, int isread) +{ + uint32_t res = syn_set_ec(0, EC_FPIDTRAP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, COPROC_ISS, CV, cv); + res = FIELD_DP32(res, COPROC_ISS, COND, cond); + res = FIELD_DP32(res, COPROC_ISS, OP1, opc1); + res = FIELD_DP32(res, COPROC_ISS, CRN, crn); + res = FIELD_DP32(res, COPROC_ISS, RT, rt); + res = FIELD_DP32(res, COPROC_ISS, ISREAD, isread); + + return res; +} + static inline uint32_t syn_cp14_rt_trap(int cv, int cond, int opc1, int opc2, int crn, int crm, int rt, int isread, bool is_16bit) diff --git a/target/arm/tcg/vfp_helper.c b/target/arm/tcg/vfp_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/vfp_helper.c +++ b/target/arm/tcg/vfp_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(check_hcr_el2_trap)(CPUARMState *env, uint32_t rt, uint32_t reg) g_assert_not_reached(); } - syndrome = ((EC_FPIDTRAP << ARM_EL_EC_SHIFT) - | ARM_EL_IL - | (1 << 24) | (0xe << 20) | (7 << 14) - | (reg << 10) | (rt << 5) | 1); + syndrome = syn_cp10_rt_trap(1, 0xe, 7, reg, rt, 1); raise_exception(env, EXCP_HYP_TRAP, syndrome, 2); } -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> One more step towards dropping the old #defines. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-17-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch32_hyp(CPUState *cs) */ if (cs->exception_index == EXCP_PREFETCH_ABORT || (cs->exception_index == EXCP_DATA_ABORT && - !(env->exception.syndrome & ARM_EL_ISV)) || + !FIELD_EX32(env->exception.syndrome, SYNDROME, IL)) || syn_get_ec(env->exception.syndrome) == EC_UNCATEGORIZED) { - env->exception.syndrome &= ~ARM_EL_IL; + env->exception.syndrome = FIELD_DP32(env->exception.syndrome, SYNDROME, IL, 0); } } env->cp15.esr_el[2] = env->exception.syndrome; -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> This removes the last use of ARM_EL_EC_SHIFT. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-18-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 1 - target/arm/tcg/debug.c | 2 +- 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ typedef enum { } GCSInstructionType; #define ARM_EL_EC_LENGTH 6 -#define ARM_EL_EC_SHIFT 26 #define ARM_EL_IL_SHIFT 25 #define ARM_EL_ISV_SHIFT 24 #define ARM_EL_IL (1 << ARM_EL_IL_SHIFT) diff --git a/target/arm/tcg/debug.c b/target/arm/tcg/debug.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/debug.c +++ b/target/arm/tcg/debug.c @@ -XXX,XX +XXX,XX @@ raise_exception_debug(CPUARMState *env, uint32_t excp, uint32_t syndrome) * Similarly for watchpoint and breakpoint matches. */ assert(debug_el >= cur_el); - syndrome |= (debug_el == cur_el) << ARM_EL_EC_SHIFT; + syndrome |= (debug_el == cur_el) << R_SYNDROME_EC_SHIFT; raise_exception(env, excp, syndrome, debug_el); } -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Rather than open coding a bunch of shifts and masks we can use the syndrome definitions. While we are at it assert it really is a EC_DATAABORT. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-19-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/whpx/whpx-all.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/target/arm/whpx/whpx-all.c b/target/arm/whpx/whpx-all.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/whpx/whpx-all.c +++ b/target/arm/whpx/whpx-all.c @@ -XXX,XX +XXX,XX @@ static int whpx_handle_mmio(CPUState *cpu, WHV_MEMORY_ACCESS_CONTEXT *ctx) { uint64_t syndrome = ctx->Syndrome; - bool isv = syndrome & ARM_EL_ISV; - bool iswrite = (syndrome >> 6) & 1; - bool sse = (syndrome >> 21) & 1; - uint32_t sas = (syndrome >> 22) & 3; + bool isv = FIELD_EX32(syndrome, DABORT_ISS, ISV); + bool iswrite = FIELD_EX32(syndrome, DABORT_ISS, WNR); + bool sse = FIELD_EX32(syndrome, DABORT_ISS, SSE); + uint32_t sas = FIELD_EX32(syndrome, DABORT_ISS, SAS); uint32_t len = 1 << sas; - uint32_t srt = (syndrome >> 16) & 0x1f; - uint32_t cm = (syndrome >> 8) & 0x1; + uint32_t srt = FIELD_EX32(syndrome, DABORT_ISS, SRT); + uint32_t cm = FIELD_EX32(syndrome, DABORT_ISS, CM); uint64_t val = 0; + assert(syn_get_ec(syndrome) == EC_DATAABORT); assert(!cm); assert(isv); -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Rather than open coding a bunch of shifts and masks we can use the syndrome definitions. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20260422125250.1303100-20-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/hvf/hvf.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/target/arm/hvf/hvf.c b/target/arm/hvf/hvf.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/hvf/hvf.c +++ b/target/arm/hvf/hvf.c @@ -XXX,XX +XXX,XX @@ static int hvf_handle_exception(CPUState *cpu, hv_vcpu_exit_exception_t *excp) break; } case EC_DATAABORT: { - bool isv = syndrome & ARM_EL_ISV; - bool iswrite = (syndrome >> 6) & 1; - bool s1ptw = (syndrome >> 7) & 1; - bool sse = (syndrome >> 21) & 1; - uint32_t sas = (syndrome >> 22) & 3; + bool isv = FIELD_EX32(syndrome, DABORT_ISS, ISV); + bool iswrite = FIELD_EX32(syndrome, DABORT_ISS, WNR); + bool s1ptw = FIELD_EX32(syndrome, DABORT_ISS, S1PTW); + bool sse = FIELD_EX32(syndrome, DABORT_ISS, SSE); + uint32_t sas = FIELD_EX32(syndrome, DABORT_ISS, SAS); uint32_t len = 1 << sas; - uint32_t srt = (syndrome >> 16) & 0x1f; - uint32_t cm = (syndrome >> 8) & 0x1; + uint32_t srt = FIELD_EX32(syndrome, DABORT_ISS, SRT); + uint32_t cm = FIELD_EX32(syndrome, DABORT_ISS, CM); uint64_t val = 0; uint64_t ipa = excp->physical_address; AddressSpace *as = cpu_get_address_space(cpu, ARMASIdx_NS); -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> One more step to removing the old defines. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-21-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/tlb_helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/tcg/tlb_helper.c b/target/arm/tcg/tlb_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/tlb_helper.c +++ b/target/arm/tcg/tlb_helper.c @@ -XXX,XX +XXX,XX @@ static inline uint64_t merge_syn_data_abort(uint32_t template_syn, */ assert(!fi->stage2); syn = syn_data_abort_vncr(fi->ea, is_write, fsc); - } else if (!(template_syn & ARM_EL_ISV) || target_el != 2 + } else if (!FIELD_EX32(template_syn, DABORT_ISS, ISV) || target_el != 2 || fi->s1ptw || !fi->stage2) { syn = syn_data_abort_no_iss(same_el, 0, fi->ea, 0, fi->s1ptw, is_write, fsc); -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> These are only valid for data abort syndromes. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-22-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/tlb_helper.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/tcg/tlb_helper.c b/target/arm/tcg/tlb_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/tlb_helper.c +++ b/target/arm/tcg/tlb_helper.c @@ -XXX,XX +XXX,XX @@ static inline uint64_t merge_syn_data_abort(uint32_t template_syn, * ST64BV, or ST64BV0 insns report syndrome info even for stage-1 * faults and regardless of the target EL. */ - if (template_syn & ARM_EL_VNCR) { + if (FIELD_EX32(template_syn, DABORT_ISS, VNCR)) { /* * FEAT_NV2 faults on accesses via VNCR_EL2 are a special case: * they are always reported as "same EL", even though we are going @@ -XXX,XX +XXX,XX @@ void arm_deliver_fault(ARMCPU *cpu, vaddr addr, * because we masked that out in disas_set_insn_syndrome()) */ bool is_vncr = (access_type != MMU_INST_FETCH) && - (env->exception.syndrome & ARM_EL_VNCR); + FIELD_EX32(env->exception.syndrome, DABORT_ISS, VNCR); if (is_vncr) { /* FEAT_NV2 faults on accesses via VNCR_EL2 go to EL2 */ -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Now everything is defined with registerfields we can drop the old defines. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-23-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 9 --------- 1 file changed, 9 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ typedef enum { GCS_IT_GCSPOPX = 9, } GCSInstructionType; -#define ARM_EL_EC_LENGTH 6 -#define ARM_EL_IL_SHIFT 25 -#define ARM_EL_ISV_SHIFT 24 -#define ARM_EL_IL (1 << ARM_EL_IL_SHIFT) -#define ARM_EL_ISV (1 << ARM_EL_ISV_SHIFT) - -/* In the Data Abort syndrome */ -#define ARM_EL_VNCR (1 << 13) - static inline uint32_t syn_get_ec(uint32_t syn) { return FIELD_EX32(syn, SYNDROME, EC); -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Pass the register number (rd) to the wfit helper and report it in the syndrome ISS. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-24-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 11 ++++++++++- target/arm/tcg/helper-defs.h | 2 +- target/arm/tcg/op_helper.c | 7 ++++--- target/arm/tcg/translate-a64.c | 2 +- 4 files changed, 16 insertions(+), 6 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ FIELD(WFX_ISS, RN, 5, 5) FIELD(WFX_ISS, COND, 20, 4) FIELD(WFX_ISS, CV, 24, 1) -static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit) +typedef enum { + WFI = 0b00, + WFE = 0b01, + WFIT = 0b10, + WFET = 0xb11 +} wfx_ti; + +static inline uint32_t syn_wfx(int cv, int cond, int rn, bool rv, wfx_ti ti, bool is_16bit) { uint32_t res = syn_set_ec(0, EC_WFX_TRAP); res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit) res = FIELD_DP32(res, WFX_ISS, CV, cv); res = FIELD_DP32(res, WFX_ISS, COND, cond); res = FIELD_DP32(res, WFX_ISS, TI, ti); + res = FIELD_DP32(res, WFX_ISS, RN, rn); + res = FIELD_DP32(res, WFX_ISS, RV, rv); return res; } diff --git a/target/arm/tcg/helper-defs.h b/target/arm/tcg/helper-defs.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/helper-defs.h +++ b/target/arm/tcg/helper-defs.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_2(exception_pc_alignment, noreturn, env, vaddr) DEF_HELPER_1(setend, void, env) DEF_HELPER_2(wfi, void, env, i32) DEF_HELPER_1(wfe, void, env) -DEF_HELPER_2(wfit, void, env, i64) +DEF_HELPER_2(wfit, void, env, i32) DEF_HELPER_1(yield, void, env) DEF_HELPER_1(pre_hvc, void, env) DEF_HELPER_2(pre_smc, void, env, i32) diff --git a/target/arm/tcg/op_helper.c b/target/arm/tcg/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/op_helper.c +++ b/target/arm/tcg/op_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(wfi)(CPUARMState *env, uint32_t insn_len) env->regs[15] -= insn_len; } - raise_exception(env, excp, syn_wfx(1, 0xe, 0, insn_len == 2), + raise_exception(env, excp, syn_wfx(1, 0xe, 0, false, WFI, insn_len == 2), target_el); } @@ -XXX,XX +XXX,XX @@ void HELPER(wfi)(CPUARMState *env, uint32_t insn_len) #endif } -void HELPER(wfit)(CPUARMState *env, uint64_t timeout) +void HELPER(wfit)(CPUARMState *env, uint32_t rd) { #ifdef CONFIG_USER_ONLY /* @@ -XXX,XX +XXX,XX @@ void HELPER(wfit)(CPUARMState *env, uint64_t timeout) int target_el = check_wfx_trap(env, false, &excp); /* The WFIT should time out when CNTVCT_EL0 >= the specified value. */ uint64_t cntval = gt_get_countervalue(env); + uint64_t timeout = env->xregs[rd]; /* * We want the value that we would get if we read CNTVCT_EL0 from * the current exception level, so the direct_access offset, not @@ -XXX,XX +XXX,XX @@ void HELPER(wfit)(CPUARMState *env, uint64_t timeout) if (target_el) { env->pc -= 4; - raise_exception(env, excp, syn_wfx(1, 0xe, 2, false), target_el); + raise_exception(env, excp, syn_wfx(1, 0xe, rd, true, WFIT, false), target_el); } if (uadd64_overflow(timeout, offset, &nexttick)) { diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool trans_WFIT(DisasContext *s, arg_WFIT *a) } gen_a64_update_pc(s, 4); - gen_helper_wfit(tcg_env, cpu_reg(s, a->rd)); + gen_helper_wfit(tcg_env, tcg_constant_i32(a->rd)); /* Go back to the main loop to check for interrupts */ s->base.is_jmp = DISAS_EXIT; return true; -- 2.43.0