The following changes since commit 8032c78e556cd0baec111740a6c636863f9bd7c8: Merge tag 'firmware-20241216-pull-request' of https://gitlab.com/kraxel/qemu into staging (2024-12-16 14:20:33 -0500) are available in the Git repository at: https://github.com/alistair23/qemu.git tags/pull-riscv-to-apply-20241219-1 for you to fetch changes up to 5632d271be16b5e769342d54198c4359658abcb7: target/riscv: add support for RV64 Xiangshan Nanhu CPU (2024-12-18 11:07:59 +1000) ---------------------------------------------------------------- RISC-V PR for 10.0 * Correct the validness check of iova * Fix APLIC in_clrip and clripnum write emulation * Support riscv-iommu-sys device * Add Tenstorrent Ascalon CPU * Add AIA userspace irqchip_split support * Add Microblaze V generic board * Upgrade ACPI SPCR table to support SPCR table revision 4 format * Remove tswap64() calls from HTIF * Support 64-bit address of initrd * Introduce svukte ISA extension * Support ssstateen extension * Support for RV64 Xiangshan Nanhu CPU ---------------------------------------------------------------- Anton Blanchard (1): target/riscv: Add Tenstorrent Ascalon CPU Daniel Henrique Barboza (15): hw/riscv/riscv-iommu.c: add riscv_iommu_instance_init() hw/riscv/riscv-iommu: parametrize CAP.IGS hw/riscv/virt.c, riscv-iommu-sys.c: add MSIx support hw/riscv/riscv-iommu: implement reset protocol docs/specs: add riscv-iommu-sys information hw/intc/riscv_aplic: rename is_kvm_aia() hw/riscv/virt.c: reduce virt_use_kvm_aia() usage hw/riscv/virt.c: rename helper to virt_use_kvm_aia_aplic_imsic() target/riscv/kvm: consider irqchip_split() in aia_create() hw/riscv/virt.c, riscv_aplic.c: add 'emulated_aplic' helpers hw/intc/riscv_aplic: add kvm_msicfgaddr for split mode aplic-imsic target/riscv/kvm: remove irqchip_split() restriction docs: update riscv/virt.rst with kernel-irqchip=split support target/riscv/tcg: hide warn for named feats when disabling via priv_ver target/riscv: add ssstateen Fea.Wang (6): target/riscv: Add svukte extension capability variable target/riscv: Support senvcfg[UKTE] bit when svukte extension is enabled target/riscv: Support hstatus[HUKTE] bit when svukte extension is enabled target/riscv: Check memory access to meet svukte rule target/riscv: Expose svukte ISA extension target/riscv: Check svukte is not enabled in RV32 Jason Chien (1): hw/riscv/riscv-iommu.c: Correct the validness check of iova Jim Shu (3): hw/riscv: Support to load DTB after 3GB memory on 64-bit system. hw/riscv: Add a new struct RISCVBootInfo hw/riscv: Add the checking if DTB overlaps to kernel or initrd MollyChen (1): target/riscv: add support for RV64 Xiangshan Nanhu CPU Philippe Mathieu-Daudé (5): MAINTAINERS: Cover RISC-V HTIF interface hw/char/riscv_htif: Explicit little-endian implementation hw/char/riscv_htif: Clarify MemoryRegionOps expect 32-bit accesses target/riscv: Include missing headers in 'vector_internals.h' target/riscv: Include missing headers in 'internals.h' Sai Pavan Boddu (1): hw/riscv: Add Microblaze V generic board Sia Jee Heng (3): qtest: allow SPCR acpi table changes hw/acpi: Upgrade ACPI SPCR table to support SPCR table revision 4 format tests/qtest/bios-tables-test: Update virt SPCR golden reference for RISC-V Sunil V L (1): hw/riscv/virt: Add IOMMU as platform device if the option is set Tomasz Jeznach (1): hw/riscv: add riscv-iommu-sys platform device Yong-Xuan Wang (1): hw/intc/riscv_aplic: Fix APLIC in_clrip and clripnum write emulation MAINTAINERS | 8 + docs/specs/index.rst | 1 + docs/specs/riscv-aia.rst | 83 ++++++++++ docs/specs/riscv-iommu.rst | 30 +++- docs/system/riscv/microblaze-v-generic.rst | 42 +++++ docs/system/riscv/virt.rst | 17 ++ docs/system/target-riscv.rst | 1 + hw/riscv/riscv-iommu-bits.h | 6 + hw/riscv/riscv-iommu.h | 5 + include/hw/acpi/acpi-defs.h | 7 +- include/hw/acpi/aml-build.h | 2 +- include/hw/intc/riscv_aplic.h | 8 + include/hw/riscv/boot.h | 28 +++- include/hw/riscv/iommu.h | 10 +- include/hw/riscv/virt.h | 6 +- target/riscv/cpu-qom.h | 2 + target/riscv/cpu_bits.h | 2 + target/riscv/cpu_cfg.h | 2 + target/riscv/internals.h | 3 + target/riscv/vector_internals.h | 1 + hw/acpi/aml-build.c | 20 ++- hw/arm/virt-acpi-build.c | 8 +- hw/char/riscv_htif.c | 15 +- hw/intc/riscv_aplic.c | 74 +++++++-- hw/loongarch/acpi-build.c | 6 +- hw/riscv/boot.c | 100 +++++++---- hw/riscv/microblaze-v-generic.c | 184 +++++++++++++++++++++ hw/riscv/microchip_pfsoc.c | 13 +- hw/riscv/opentitan.c | 4 +- hw/riscv/riscv-iommu-pci.c | 21 +++ hw/riscv/riscv-iommu-sys.c | 256 +++++++++++++++++++++++++++++ hw/riscv/riscv-iommu.c | 137 ++++++++++----- hw/riscv/sifive_e.c | 4 +- hw/riscv/sifive_u.c | 18 +- hw/riscv/spike.c | 14 +- hw/riscv/virt-acpi-build.c | 12 +- hw/riscv/virt.c | 159 +++++++++++++++--- target/riscv/cpu.c | 101 ++++++++++++ target/riscv/cpu_helper.c | 55 +++++++ target/riscv/csr.c | 7 + target/riscv/kvm/kvm-cpu.c | 43 ++--- target/riscv/tcg/tcg-cpu.c | 27 ++- hw/riscv/Kconfig | 8 + hw/riscv/meson.build | 3 +- hw/riscv/trace-events | 4 + tests/data/acpi/riscv64/virt/SPCR | Bin 80 -> 90 bytes 46 files changed, 1380 insertions(+), 177 deletions(-) create mode 100644 docs/specs/riscv-aia.rst create mode 100644 docs/system/riscv/microblaze-v-generic.rst create mode 100644 hw/riscv/microblaze-v-generic.c create mode 100644 hw/riscv/riscv-iommu-sys.c From: Jason Chien <jason.chien@sifive.com> From RISCV IOMMU spec section 2.1.3: When SXL is 1, the following rules apply: - If the first-stage is not Bare, then a page fault corresponding to the original access type occurs if the IOVA has bits beyond bit 31 set to 1. - If the second-stage is not Bare, then a guest page fault corresponding to the original access type occurs if the incoming GPA has bits beyond bit 33 set to 1. From RISCV IOMMU spec section 2.3 step 17: Use the process specified in Section "Two-Stage Address Translation" of the RISC-V Privileged specification to determine the GPA accessed by the transaction. From RISCV IOMMU spec section 2.3 step 19: Use the second-stage address translation process specified in Section "Two-Stage Address Translation" of the RISC-V Privileged specification to translate the GPA A to determine the SPA accessed by the transaction. This commit adds the iova check with the following rules: - For Sv32, Sv32x4, Sv39x4, Sv48x4 and Sv57x4, the iova must be zero extended. - For Sv39, Sv48 and Sv57, the iova must be signed extended with most significant bit. Signed-off-by: Jason Chien <jason.chien@sifive.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20241114065617.25133-1-jason.chien@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu.c | 23 ++++++++++++++++++++--- 1 file changed, 20 insertions(+), 3 deletions(-) diff --git a/hw/riscv/riscv-iommu.c b/hw/riscv/riscv-iommu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.c +++ b/hw/riscv/riscv-iommu.c @@ -XXX,XX +XXX,XX @@ static int riscv_iommu_spa_fetch(RISCVIOMMUState *s, RISCVIOMMUContext *ctx, /* Address range check before first level lookup */ if (!sc[pass].step) { - const uint64_t va_mask = (1ULL << (va_skip + va_bits)) - 1; - if ((addr & va_mask) != addr) { - return RISCV_IOMMU_FQ_CAUSE_DMA_DISABLED; + const uint64_t va_len = va_skip + va_bits; + const uint64_t va_mask = (1ULL << va_len) - 1; + + if (pass == S_STAGE && va_len > 32) { + target_ulong mask, masked_msbs; + + mask = (1L << (TARGET_LONG_BITS - (va_len - 1))) - 1; + masked_msbs = (addr >> (va_len - 1)) & mask; + + if (masked_msbs != 0 && masked_msbs != mask) { + return (iotlb->perm & IOMMU_WO) ? + RISCV_IOMMU_FQ_CAUSE_WR_FAULT_S : + RISCV_IOMMU_FQ_CAUSE_RD_FAULT_S; + } + } else { + if ((addr & va_mask) != addr) { + return (iotlb->perm & IOMMU_WO) ? + RISCV_IOMMU_FQ_CAUSE_WR_FAULT_VS : + RISCV_IOMMU_FQ_CAUSE_RD_FAULT_VS; + } } } -- 2.47.1 From: Yong-Xuan Wang <yongxuan.wang@sifive.com> In the section "4.7 Precise effects on interrupt-pending bits" of the RISC-V AIA specification defines that: "If the source mode is Level1 or Level0 and the interrupt domain is configured in MSI delivery mode (domaincfg.DM = 1): The pending bit is cleared whenever the rectified input value is low, when the interrupt is forwarded by MSI, or by a relevant write to an in_clrip register or to clripnum." Update the riscv_aplic_set_pending() to match the spec. Fixes: bf31cf06eb ("hw/intc/riscv_aplic: Fix setipnum_le write emulation for APLIC MSI-mode") Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20241029085349.30412-1-yongxuan.wang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/intc/riscv_aplic.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/hw/intc/riscv_aplic.c b/hw/intc/riscv_aplic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/riscv_aplic.c +++ b/hw/intc/riscv_aplic.c @@ -XXX,XX +XXX,XX @@ static void riscv_aplic_set_pending(RISCVAPLICState *aplic, if ((sm == APLIC_SOURCECFG_SM_LEVEL_HIGH) || (sm == APLIC_SOURCECFG_SM_LEVEL_LOW)) { - if (!aplic->msimode || (aplic->msimode && !pending)) { + if (!aplic->msimode) { return; } + if (aplic->msimode && !pending) { + goto noskip_write_pending; + } if ((aplic->state[irq] & APLIC_ISTATE_INPUT) && (sm == APLIC_SOURCECFG_SM_LEVEL_LOW)) { return; @@ -XXX,XX +XXX,XX @@ static void riscv_aplic_set_pending(RISCVAPLICState *aplic, } } +noskip_write_pending: riscv_aplic_set_pending_raw(aplic, irq, pending); } -- 2.47.1 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Move all the static initializion of the device to an init() function, leaving only the dynamic initialization to be done during realize. With this change s->cap is initialized with RISCV_IOMMU_CAP_DBG during init(), and realize() will increment s->cap with the extra caps. This will allow callers to add IOMMU capabilities before the realization. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20241106133407.604587-2-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu.c | 71 +++++++++++++++++++++++------------------- 1 file changed, 39 insertions(+), 32 deletions(-) diff --git a/hw/riscv/riscv-iommu.c b/hw/riscv/riscv-iommu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.c +++ b/hw/riscv/riscv-iommu.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps riscv_iommu_trap_ops = { } }; +static void riscv_iommu_instance_init(Object *obj) +{ + RISCVIOMMUState *s = RISCV_IOMMU(obj); + + /* Enable translation debug interface */ + s->cap = RISCV_IOMMU_CAP_DBG; + + /* Report QEMU target physical address space limits */ + s->cap = set_field(s->cap, RISCV_IOMMU_CAP_PAS, + TARGET_PHYS_ADDR_SPACE_BITS); + + /* TODO: method to report supported PID bits */ + s->pid_bits = 8; /* restricted to size of MemTxAttrs.pid */ + s->cap |= RISCV_IOMMU_CAP_PD8; + + /* register storage */ + s->regs_rw = g_new0(uint8_t, RISCV_IOMMU_REG_SIZE); + s->regs_ro = g_new0(uint8_t, RISCV_IOMMU_REG_SIZE); + s->regs_wc = g_new0(uint8_t, RISCV_IOMMU_REG_SIZE); + + /* Mark all registers read-only */ + memset(s->regs_ro, 0xff, RISCV_IOMMU_REG_SIZE); + + /* Device translation context cache */ + s->ctx_cache = g_hash_table_new_full(riscv_iommu_ctx_hash, + riscv_iommu_ctx_equal, + g_free, NULL); + + s->iot_cache = g_hash_table_new_full(riscv_iommu_iot_hash, + riscv_iommu_iot_equal, + g_free, NULL); + + s->iommus.le_next = NULL; + s->iommus.le_prev = NULL; + QLIST_INIT(&s->spaces); +} + static void riscv_iommu_realize(DeviceState *dev, Error **errp) { RISCVIOMMUState *s = RISCV_IOMMU(dev); - s->cap = s->version & RISCV_IOMMU_CAP_VERSION; + s->cap |= s->version & RISCV_IOMMU_CAP_VERSION; if (s->enable_msi) { s->cap |= RISCV_IOMMU_CAP_MSI_FLAT | RISCV_IOMMU_CAP_MSI_MRIF; } @@ -XXX,XX +XXX,XX @@ static void riscv_iommu_realize(DeviceState *dev, Error **errp) s->cap |= RISCV_IOMMU_CAP_SV32X4 | RISCV_IOMMU_CAP_SV39X4 | RISCV_IOMMU_CAP_SV48X4 | RISCV_IOMMU_CAP_SV57X4; } - /* Enable translation debug interface */ - s->cap |= RISCV_IOMMU_CAP_DBG; - - /* Report QEMU target physical address space limits */ - s->cap = set_field(s->cap, RISCV_IOMMU_CAP_PAS, - TARGET_PHYS_ADDR_SPACE_BITS); - - /* TODO: method to report supported PID bits */ - s->pid_bits = 8; /* restricted to size of MemTxAttrs.pid */ - s->cap |= RISCV_IOMMU_CAP_PD8; /* Out-of-reset translation mode: OFF (DMA disabled) BARE (passthrough) */ s->ddtp = set_field(0, RISCV_IOMMU_DDTP_MODE, s->enable_off ? RISCV_IOMMU_DDTP_MODE_OFF : RISCV_IOMMU_DDTP_MODE_BARE); - /* register storage */ - s->regs_rw = g_new0(uint8_t, RISCV_IOMMU_REG_SIZE); - s->regs_ro = g_new0(uint8_t, RISCV_IOMMU_REG_SIZE); - s->regs_wc = g_new0(uint8_t, RISCV_IOMMU_REG_SIZE); - - /* Mark all registers read-only */ - memset(s->regs_ro, 0xff, RISCV_IOMMU_REG_SIZE); - /* * Register complete MMIO space, including MSI/PBA registers. * Note, PCIDevice implementation will add overlapping MR for MSI/PBA, @@ -XXX,XX +XXX,XX @@ static void riscv_iommu_realize(DeviceState *dev, Error **errp) memory_region_init_io(&s->trap_mr, OBJECT(dev), &riscv_iommu_trap_ops, s, "riscv-iommu-trap", ~0ULL); address_space_init(&s->trap_as, &s->trap_mr, "riscv-iommu-trap-as"); - - /* Device translation context cache */ - s->ctx_cache = g_hash_table_new_full(riscv_iommu_ctx_hash, - riscv_iommu_ctx_equal, - g_free, NULL); - - s->iot_cache = g_hash_table_new_full(riscv_iommu_iot_hash, - riscv_iommu_iot_equal, - g_free, NULL); - - s->iommus.le_next = NULL; - s->iommus.le_prev = NULL; - QLIST_INIT(&s->spaces); } static void riscv_iommu_unrealize(DeviceState *dev) @@ -XXX,XX +XXX,XX @@ static const TypeInfo riscv_iommu_info = { .name = TYPE_RISCV_IOMMU, .parent = TYPE_DEVICE, .instance_size = sizeof(RISCVIOMMUState), + .instance_init = riscv_iommu_instance_init, .class_init = riscv_iommu_class_init, }; -- 2.47.1 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Interrupt Generation Support (IGS) is a capability that is tied to the interrupt deliver mechanism, not with the core IOMMU emulation. We should allow device implementations to set IGS as they wish. A new helper is added to make it easier for device impls to set IGS. Use it in our existing IOMMU device (riscv-iommu-pci) to set RISCV_IOMMU_CAPS_IGS_MSI. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20241106133407.604587-3-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu-bits.h | 6 ++++++ hw/riscv/riscv-iommu.h | 4 ++++ hw/riscv/riscv-iommu-pci.c | 1 + hw/riscv/riscv-iommu.c | 5 +++++ 4 files changed, 16 insertions(+) diff --git a/hw/riscv/riscv-iommu-bits.h b/hw/riscv/riscv-iommu-bits.h index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu-bits.h +++ b/hw/riscv/riscv-iommu-bits.h @@ -XXX,XX +XXX,XX @@ struct riscv_iommu_pq_record { #define RISCV_IOMMU_CAP_PD17 BIT_ULL(39) #define RISCV_IOMMU_CAP_PD20 BIT_ULL(40) +enum riscv_iommu_igs_modes { + RISCV_IOMMU_CAP_IGS_MSI = 0, + RISCV_IOMMU_CAP_IGS_WSI, + RISCV_IOMMU_CAP_IGS_BOTH +}; + /* 5.4 Features control register (32bits) */ #define RISCV_IOMMU_REG_FCTL 0x0008 #define RISCV_IOMMU_FCTL_BE BIT(0) diff --git a/hw/riscv/riscv-iommu.h b/hw/riscv/riscv-iommu.h index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.h +++ b/hw/riscv/riscv-iommu.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" #include "hw/riscv/iommu.h" +#include "hw/riscv/riscv-iommu-bits.h" + +typedef enum riscv_iommu_igs_modes riscv_iommu_igs_mode; struct RISCVIOMMUState { /*< private >*/ @@ -XXX,XX +XXX,XX @@ struct RISCVIOMMUState { void riscv_iommu_pci_setup_iommu(RISCVIOMMUState *iommu, PCIBus *bus, Error **errp); +void riscv_iommu_set_cap_igs(RISCVIOMMUState *s, riscv_iommu_igs_mode mode); /* private helpers */ diff --git a/hw/riscv/riscv-iommu-pci.c b/hw/riscv/riscv-iommu-pci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu-pci.c +++ b/hw/riscv/riscv-iommu-pci.c @@ -XXX,XX +XXX,XX @@ static void riscv_iommu_pci_init(Object *obj) qdev_alias_all_properties(DEVICE(iommu), obj); iommu->icvec_avail_vectors = RISCV_IOMMU_PCI_ICVEC_VECTORS; + riscv_iommu_set_cap_igs(iommu, RISCV_IOMMU_CAP_IGS_MSI); } static const Property riscv_iommu_pci_properties[] = { diff --git a/hw/riscv/riscv-iommu.c b/hw/riscv/riscv-iommu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.c +++ b/hw/riscv/riscv-iommu.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps riscv_iommu_trap_ops = { } }; +void riscv_iommu_set_cap_igs(RISCVIOMMUState *s, riscv_iommu_igs_mode mode) +{ + s->cap = set_field(s->cap, RISCV_IOMMU_CAP_IGS, mode); +} + static void riscv_iommu_instance_init(Object *obj) { RISCVIOMMUState *s = RISCV_IOMMU(obj); -- 2.47.1 From: Tomasz Jeznach <tjeznach@rivosinc.com> This device models the RISC-V IOMMU as a sysbus device. The same design decisions taken in the riscv-iommu-pci device were kept, namely the existence of 4 vectors are available for each interrupt cause. The WSIs are emitted using the input of the s->notify() callback as a index to an IRQ list. The IRQ list starts at 'base_irq' and goes until base_irq + 3. This means that boards must have 4 contiguous IRQ lines available, starting from 'base_irq'. Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20241106133407.604587-4-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/riscv/iommu.h | 4 ++ hw/riscv/riscv-iommu-sys.c | 128 +++++++++++++++++++++++++++++++++++++ hw/riscv/riscv-iommu.c | 3 +- hw/riscv/meson.build | 2 +- 4 files changed, 134 insertions(+), 3 deletions(-) create mode 100644 hw/riscv/riscv-iommu-sys.c diff --git a/include/hw/riscv/iommu.h b/include/hw/riscv/iommu.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/riscv/iommu.h +++ b/include/hw/riscv/iommu.h @@ -XXX,XX +XXX,XX @@ typedef struct RISCVIOMMUSpace RISCVIOMMUSpace; OBJECT_DECLARE_SIMPLE_TYPE(RISCVIOMMUStatePci, RISCV_IOMMU_PCI) typedef struct RISCVIOMMUStatePci RISCVIOMMUStatePci; +#define TYPE_RISCV_IOMMU_SYS "riscv-iommu-device" +OBJECT_DECLARE_SIMPLE_TYPE(RISCVIOMMUStateSys, RISCV_IOMMU_SYS) +typedef struct RISCVIOMMUStateSys RISCVIOMMUStateSys; + #endif diff --git a/hw/riscv/riscv-iommu-sys.c b/hw/riscv/riscv-iommu-sys.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/riscv/riscv-iommu-sys.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU emulation of an RISC-V IOMMU Platform Device + * + * Copyright (C) 2022-2023 Rivos Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2 or later, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "hw/irq.h" +#include "hw/pci/pci_bus.h" +#include "hw/qdev-properties.h" +#include "hw/sysbus.h" +#include "qapi/error.h" +#include "qemu/error-report.h" +#include "qemu/host-utils.h" +#include "qemu/module.h" +#include "qom/object.h" + +#include "riscv-iommu.h" + +#define RISCV_IOMMU_SYSDEV_ICVEC_VECTORS 0x3333 + +/* RISC-V IOMMU System Platform Device Emulation */ + +struct RISCVIOMMUStateSys { + SysBusDevice parent; + uint64_t addr; + uint32_t base_irq; + DeviceState *irqchip; + RISCVIOMMUState iommu; + qemu_irq irqs[RISCV_IOMMU_INTR_COUNT]; +}; + +static void riscv_iommu_sysdev_notify(RISCVIOMMUState *iommu, + unsigned vector) +{ + RISCVIOMMUStateSys *s = container_of(iommu, RISCVIOMMUStateSys, iommu); + uint32_t fctl = riscv_iommu_reg_get32(iommu, RISCV_IOMMU_REG_FCTL); + + /* We do not support MSIs yet */ + if (!(fctl & RISCV_IOMMU_FCTL_WSI)) { + return; + } + + qemu_irq_pulse(s->irqs[vector]); +} + +static void riscv_iommu_sys_realize(DeviceState *dev, Error **errp) +{ + RISCVIOMMUStateSys *s = RISCV_IOMMU_SYS(dev); + SysBusDevice *sysdev = SYS_BUS_DEVICE(s); + PCIBus *pci_bus; + qemu_irq irq; + + qdev_realize(DEVICE(&s->iommu), NULL, errp); + sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->iommu.regs_mr); + if (s->addr) { + sysbus_mmio_map(SYS_BUS_DEVICE(s), 0, s->addr); + } + + pci_bus = (PCIBus *) object_resolve_path_type("", TYPE_PCI_BUS, NULL); + if (pci_bus) { + riscv_iommu_pci_setup_iommu(&s->iommu, pci_bus, errp); + } + + s->iommu.notify = riscv_iommu_sysdev_notify; + + /* 4 IRQs are defined starting from s->base_irq */ + for (int i = 0; i < RISCV_IOMMU_INTR_COUNT; i++) { + sysbus_init_irq(sysdev, &s->irqs[i]); + irq = qdev_get_gpio_in(s->irqchip, s->base_irq + i); + sysbus_connect_irq(sysdev, i, irq); + } +} + +static void riscv_iommu_sys_init(Object *obj) +{ + RISCVIOMMUStateSys *s = RISCV_IOMMU_SYS(obj); + RISCVIOMMUState *iommu = &s->iommu; + + object_initialize_child(obj, "iommu", iommu, TYPE_RISCV_IOMMU); + qdev_alias_all_properties(DEVICE(iommu), obj); + + iommu->icvec_avail_vectors = RISCV_IOMMU_SYSDEV_ICVEC_VECTORS; + riscv_iommu_set_cap_igs(iommu, RISCV_IOMMU_CAP_IGS_WSI); +} + +static Property riscv_iommu_sys_properties[] = { + DEFINE_PROP_UINT64("addr", RISCVIOMMUStateSys, addr, 0), + DEFINE_PROP_UINT32("base-irq", RISCVIOMMUStateSys, base_irq, 0), + DEFINE_PROP_LINK("irqchip", RISCVIOMMUStateSys, irqchip, + TYPE_DEVICE, DeviceState *), + DEFINE_PROP_END_OF_LIST(), +}; + +static void riscv_iommu_sys_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + dc->realize = riscv_iommu_sys_realize; + set_bit(DEVICE_CATEGORY_MISC, dc->categories); + device_class_set_props(dc, riscv_iommu_sys_properties); +} + +static const TypeInfo riscv_iommu_sys = { + .name = TYPE_RISCV_IOMMU_SYS, + .parent = TYPE_SYS_BUS_DEVICE, + .class_init = riscv_iommu_sys_class_init, + .instance_init = riscv_iommu_sys_init, + .instance_size = sizeof(RISCVIOMMUStateSys), +}; + +static void riscv_iommu_register_sys(void) +{ + type_register_static(&riscv_iommu_sys); +} + +type_init(riscv_iommu_register_sys) diff --git a/hw/riscv/riscv-iommu.c b/hw/riscv/riscv-iommu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.c +++ b/hw/riscv/riscv-iommu.c @@ -XXX,XX +XXX,XX @@ static uint8_t riscv_iommu_get_icvec_vector(uint32_t icvec, uint32_t vec_type) static void riscv_iommu_notify(RISCVIOMMUState *s, int vec_type) { - const uint32_t fctl = riscv_iommu_reg_get32(s, RISCV_IOMMU_REG_FCTL); uint32_t ipsr, icvec, vector; - if (fctl & RISCV_IOMMU_FCTL_WSI || !s->notify) { + if (!s->notify) { return; } diff --git a/hw/riscv/meson.build b/hw/riscv/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/meson.build +++ b/hw/riscv/meson.build @@ -XXX,XX +XXX,XX @@ riscv_ss.add(when: 'CONFIG_SIFIVE_U', if_true: files('sifive_u.c')) riscv_ss.add(when: 'CONFIG_SPIKE', if_true: files('spike.c')) riscv_ss.add(when: 'CONFIG_MICROCHIP_PFSOC', if_true: files('microchip_pfsoc.c')) riscv_ss.add(when: 'CONFIG_ACPI', if_true: files('virt-acpi-build.c')) -riscv_ss.add(when: 'CONFIG_RISCV_IOMMU', if_true: files('riscv-iommu.c', 'riscv-iommu-pci.c')) +riscv_ss.add(when: 'CONFIG_RISCV_IOMMU', if_true: files('riscv-iommu.c', 'riscv-iommu-pci.c', 'riscv-iommu-sys.c')) hw_arch += {'riscv': riscv_ss} -- 2.47.1 From: Sunil V L <sunilvl@ventanamicro.com> Add a new machine option called 'iommu-sys' that enables a riscv-iommu-sys platform device for the 'virt' machine. The option is default 'off'. The device will use IRQs 36 to 39. We will not support both riscv-iommu-sys and riscv-iommu-pci devices in the same board in this first implementation. If a riscv-iommu-pci device is added in the command line we will disable the riscv-iommu-sys device. Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20241106133407.604587-5-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/riscv/iommu.h | 2 + include/hw/riscv/virt.h | 6 ++- hw/riscv/virt.c | 104 ++++++++++++++++++++++++++++++++++++++- 3 files changed, 109 insertions(+), 3 deletions(-) diff --git a/include/hw/riscv/iommu.h b/include/hw/riscv/iommu.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/riscv/iommu.h +++ b/include/hw/riscv/iommu.h @@ -XXX,XX +XXX,XX @@ typedef struct RISCVIOMMUStatePci RISCVIOMMUStatePci; OBJECT_DECLARE_SIMPLE_TYPE(RISCVIOMMUStateSys, RISCV_IOMMU_SYS) typedef struct RISCVIOMMUStateSys RISCVIOMMUStateSys; +#define FDT_IRQ_TYPE_EDGE_LOW 1 + #endif diff --git a/include/hw/riscv/virt.h b/include/hw/riscv/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/riscv/virt.h +++ b/include/hw/riscv/virt.h @@ -XXX,XX +XXX,XX @@ struct RISCVVirtState { OnOffAuto acpi; const MemMapEntry *memmap; struct GPEXHost *gpex_host; + OnOffAuto iommu_sys; }; enum { @@ -XXX,XX +XXX,XX @@ enum { VIRT_PCIE_MMIO, VIRT_PCIE_PIO, VIRT_PLATFORM_BUS, - VIRT_PCIE_ECAM + VIRT_PCIE_ECAM, + VIRT_IOMMU_SYS, }; enum { @@ -XXX,XX +XXX,XX @@ enum { VIRTIO_IRQ = 1, /* 1 to 8 */ VIRTIO_COUNT = 8, PCIE_IRQ = 0x20, /* 32 to 35 */ + IOMMU_SYS_IRQ = 0x24, /* 36-39 */ VIRT_PLATFORM_BUS_IRQ = 64, /* 64 to 95 */ }; @@ -XXX,XX +XXX,XX @@ enum { 1 + FDT_APLIC_INT_CELLS) bool virt_is_acpi_enabled(RISCVVirtState *s); +bool virt_is_iommu_sys_enabled(RISCVVirtState *s); void virt_acpi_setup(RISCVVirtState *vms); uint32_t imsic_num_bits(uint32_t count); diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ #include "target/riscv/pmu.h" #include "hw/riscv/riscv_hart.h" #include "hw/riscv/iommu.h" +#include "hw/riscv/riscv-iommu-bits.h" #include "hw/riscv/virt.h" #include "hw/riscv/boot.h" #include "hw/riscv/numa.h" @@ -XXX,XX +XXX,XX @@ static const MemMapEntry virt_memmap[] = { [VIRT_CLINT] = { 0x2000000, 0x10000 }, [VIRT_ACLINT_SSWI] = { 0x2F00000, 0x4000 }, [VIRT_PCIE_PIO] = { 0x3000000, 0x10000 }, + [VIRT_IOMMU_SYS] = { 0x3010000, 0x1000 }, [VIRT_PLATFORM_BUS] = { 0x4000000, 0x2000000 }, [VIRT_PLIC] = { 0xc000000, VIRT_PLIC_SIZE(VIRT_CPUS_MAX * 2) }, [VIRT_APLIC_M] = { 0xc000000, APLIC_SIZE(VIRT_CPUS_MAX) }, @@ -XXX,XX +XXX,XX @@ static void create_fdt_virtio(RISCVVirtState *s, const MemMapEntry *memmap, static void create_fdt_pcie(RISCVVirtState *s, const MemMapEntry *memmap, uint32_t irq_pcie_phandle, - uint32_t msi_pcie_phandle) + uint32_t msi_pcie_phandle, + uint32_t iommu_sys_phandle) { g_autofree char *name = NULL; MachineState *ms = MACHINE(s); @@ -XXX,XX +XXX,XX @@ static void create_fdt_pcie(RISCVVirtState *s, const MemMapEntry *memmap, 2, virt_high_pcie_memmap.base, 2, virt_high_pcie_memmap.base, 2, virt_high_pcie_memmap.size); + if (virt_is_iommu_sys_enabled(s)) { + qemu_fdt_setprop_cells(ms->fdt, name, "iommu-map", + 0, iommu_sys_phandle, 0, 0, 0, + iommu_sys_phandle, 0, 0xffff); + } + create_pcie_irq_map(s, ms->fdt, name, irq_pcie_phandle); } @@ -XXX,XX +XXX,XX @@ static void create_fdt_virtio_iommu(RISCVVirtState *s, uint16_t bdf) bdf + 1, iommu_phandle, bdf + 1, 0xffff - bdf); } +static void create_fdt_iommu_sys(RISCVVirtState *s, uint32_t irq_chip, + uint32_t *iommu_sys_phandle) +{ + const char comp[] = "riscv,iommu"; + void *fdt = MACHINE(s)->fdt; + uint32_t iommu_phandle; + g_autofree char *iommu_node = NULL; + hwaddr addr = s->memmap[VIRT_IOMMU_SYS].base; + hwaddr size = s->memmap[VIRT_IOMMU_SYS].size; + uint32_t iommu_irq_map[RISCV_IOMMU_INTR_COUNT] = { + IOMMU_SYS_IRQ + RISCV_IOMMU_INTR_CQ, + IOMMU_SYS_IRQ + RISCV_IOMMU_INTR_FQ, + IOMMU_SYS_IRQ + RISCV_IOMMU_INTR_PM, + IOMMU_SYS_IRQ + RISCV_IOMMU_INTR_PQ, + }; + + iommu_node = g_strdup_printf("/soc/iommu@%x", + (unsigned int) s->memmap[VIRT_IOMMU_SYS].base); + iommu_phandle = qemu_fdt_alloc_phandle(fdt); + qemu_fdt_add_subnode(fdt, iommu_node); + + qemu_fdt_setprop(fdt, iommu_node, "compatible", comp, sizeof(comp)); + qemu_fdt_setprop_cell(fdt, iommu_node, "#iommu-cells", 1); + qemu_fdt_setprop_cell(fdt, iommu_node, "phandle", iommu_phandle); + + qemu_fdt_setprop_cells(fdt, iommu_node, "reg", + addr >> 32, addr, size >> 32, size); + qemu_fdt_setprop_cell(fdt, iommu_node, "interrupt-parent", irq_chip); + + qemu_fdt_setprop_cells(fdt, iommu_node, "interrupts", + iommu_irq_map[0], FDT_IRQ_TYPE_EDGE_LOW, + iommu_irq_map[1], FDT_IRQ_TYPE_EDGE_LOW, + iommu_irq_map[2], FDT_IRQ_TYPE_EDGE_LOW, + iommu_irq_map[3], FDT_IRQ_TYPE_EDGE_LOW); + + *iommu_sys_phandle = iommu_phandle; +} + static void create_fdt_iommu(RISCVVirtState *s, uint16_t bdf) { const char comp[] = "riscv,pci-iommu"; @@ -XXX,XX +XXX,XX @@ static void finalize_fdt(RISCVVirtState *s) { uint32_t phandle = 1, irq_mmio_phandle = 1, msi_pcie_phandle = 1; uint32_t irq_pcie_phandle = 1, irq_virtio_phandle = 1; + uint32_t iommu_sys_phandle = 1; create_fdt_sockets(s, virt_memmap, &phandle, &irq_mmio_phandle, &irq_pcie_phandle, &irq_virtio_phandle, @@ -XXX,XX +XXX,XX @@ static void finalize_fdt(RISCVVirtState *s) create_fdt_virtio(s, virt_memmap, irq_virtio_phandle); - create_fdt_pcie(s, virt_memmap, irq_pcie_phandle, msi_pcie_phandle); + if (virt_is_iommu_sys_enabled(s)) { + create_fdt_iommu_sys(s, irq_mmio_phandle, &iommu_sys_phandle); + } + create_fdt_pcie(s, virt_memmap, irq_pcie_phandle, msi_pcie_phandle, + iommu_sys_phandle); create_fdt_reset(s, virt_memmap, &phandle); @@ -XXX,XX +XXX,XX @@ static void virt_machine_init(MachineState *machine) create_fdt(s, memmap); } + if (virt_is_iommu_sys_enabled(s)) { + DeviceState *iommu_sys = qdev_new(TYPE_RISCV_IOMMU_SYS); + + object_property_set_uint(OBJECT(iommu_sys), "addr", + s->memmap[VIRT_IOMMU_SYS].base, + &error_fatal); + object_property_set_uint(OBJECT(iommu_sys), "base-irq", + IOMMU_SYS_IRQ, + &error_fatal); + object_property_set_link(OBJECT(iommu_sys), "irqchip", + OBJECT(mmio_irqchip), + &error_fatal); + + sysbus_realize_and_unref(SYS_BUS_DEVICE(iommu_sys), &error_fatal); + } + s->machine_done.notify = virt_machine_done; qemu_add_machine_init_done_notifier(&s->machine_done); } @@ -XXX,XX +XXX,XX @@ static void virt_machine_instance_init(Object *obj) s->oem_id = g_strndup(ACPI_BUILD_APPNAME6, 6); s->oem_table_id = g_strndup(ACPI_BUILD_APPNAME8, 8); s->acpi = ON_OFF_AUTO_AUTO; + s->iommu_sys = ON_OFF_AUTO_AUTO; } static char *virt_get_aia_guests(Object *obj, Error **errp) @@ -XXX,XX +XXX,XX @@ static void virt_set_aclint(Object *obj, bool value, Error **errp) s->have_aclint = value; } +bool virt_is_iommu_sys_enabled(RISCVVirtState *s) +{ + return s->iommu_sys == ON_OFF_AUTO_ON; +} + +static void virt_get_iommu_sys(Object *obj, Visitor *v, const char *name, + void *opaque, Error **errp) +{ + RISCVVirtState *s = RISCV_VIRT_MACHINE(obj); + OnOffAuto iommu_sys = s->iommu_sys; + + visit_type_OnOffAuto(v, name, &iommu_sys, errp); +} + +static void virt_set_iommu_sys(Object *obj, Visitor *v, const char *name, + void *opaque, Error **errp) +{ + RISCVVirtState *s = RISCV_VIRT_MACHINE(obj); + + visit_type_OnOffAuto(v, name, &s->iommu_sys, errp); +} + bool virt_is_acpi_enabled(RISCVVirtState *s) { return s->acpi != ON_OFF_AUTO_OFF; @@ -XXX,XX +XXX,XX @@ static HotplugHandler *virt_machine_get_hotplug_handler(MachineState *machine, DeviceState *dev) { MachineClass *mc = MACHINE_GET_CLASS(machine); + RISCVVirtState *s = RISCV_VIRT_MACHINE(machine); if (device_is_dynamic_sysbus(mc, dev) || object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_IOMMU_PCI) || object_dynamic_cast(OBJECT(dev), TYPE_RISCV_IOMMU_PCI)) { + s->iommu_sys = ON_OFF_AUTO_OFF; return HOTPLUG_HANDLER(machine); } @@ -XXX,XX +XXX,XX @@ static void virt_machine_device_plug_cb(HotplugHandler *hotplug_dev, if (object_dynamic_cast(OBJECT(dev), TYPE_RISCV_IOMMU_PCI)) { create_fdt_iommu(s, pci_get_bdf(PCI_DEVICE(dev))); + s->iommu_sys = ON_OFF_AUTO_OFF; } } @@ -XXX,XX +XXX,XX @@ static void virt_machine_class_init(ObjectClass *oc, void *data) NULL, NULL); object_class_property_set_description(oc, "acpi", "Enable ACPI"); + + object_class_property_add(oc, "iommu-sys", "OnOffAuto", + virt_get_iommu_sys, virt_set_iommu_sys, + NULL, NULL); + object_class_property_set_description(oc, "iommu-sys", + "Enable IOMMU platform device"); } static const TypeInfo virt_machine_typeinfo = { -- 2.47.1 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> MSIx support is added in the RISC-V IOMMU platform device by including the required MSIx facilities to alow software to properly setup the MSIx subsystem. We took inspiration of what is being done in the riscv-iommu-pci device, mainly msix_init() and msix_notify(), while keeping in mind that riscv-iommu-sys isn't a true PCI device and we don't need to copy/paste all the contents of these MSIx functions. Two extra MSI MemoryRegions were added: 'msix-table' and 'msix-pba'. They are used to manage r/w of the MSI table and Pending Bit Array (PBA) respectively. Both are subregions of the main IOMMU memory region, iommu->regs_mr, initialized during riscv_iommu_realize(), and each one has their own handlers for MSIx reads and writes. This is the expected memory map when using this device in the 'virt' machine: 0000000003010000-0000000003010fff (prio 0, i/o): riscv-iommu-regs 0000000003010300-000000000301034f (prio 0, i/o): msix-table 0000000003010400-0000000003010407 (prio 0, i/o): msix-pba We're now able to set IGS to RISCV_IOMMU_CAP_IGS_BOTH, and userspace is free to decide which interrupt model to use. Enabling MSIx support for this device in the 'virt' machine requires adding 'msi-parent' in the iommu-sys DT. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20241106133407.604587-6-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu-sys.c | 116 +++++++++++++++++++++++++++++++++++-- hw/riscv/virt.c | 6 +- hw/riscv/trace-events | 2 + 3 files changed, 119 insertions(+), 5 deletions(-) diff --git a/hw/riscv/riscv-iommu-sys.c b/hw/riscv/riscv-iommu-sys.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu-sys.c +++ b/hw/riscv/riscv-iommu-sys.c @@ -XXX,XX +XXX,XX @@ #include "qemu/host-utils.h" #include "qemu/module.h" #include "qom/object.h" +#include "exec/exec-all.h" +#include "trace.h" #include "riscv-iommu.h" #define RISCV_IOMMU_SYSDEV_ICVEC_VECTORS 0x3333 +#define RISCV_IOMMU_PCI_MSIX_VECTORS 5 + /* RISC-V IOMMU System Platform Device Emulation */ struct RISCVIOMMUStateSys { @@ -XXX,XX +XXX,XX @@ struct RISCVIOMMUStateSys { uint32_t base_irq; DeviceState *irqchip; RISCVIOMMUState iommu; + + /* Wired int support */ qemu_irq irqs[RISCV_IOMMU_INTR_COUNT]; + + /* Memory Regions for MSIX table and pending bit entries. */ + MemoryRegion msix_table_mmio; + MemoryRegion msix_pba_mmio; + uint8_t *msix_table; + uint8_t *msix_pba; +}; + +static uint64_t msix_table_mmio_read(void *opaque, hwaddr addr, + unsigned size) +{ + RISCVIOMMUStateSys *s = opaque; + + g_assert(addr + size <= RISCV_IOMMU_PCI_MSIX_VECTORS * PCI_MSIX_ENTRY_SIZE); + return pci_get_long(s->msix_table + addr); +} + +static void msix_table_mmio_write(void *opaque, hwaddr addr, + uint64_t val, unsigned size) +{ + RISCVIOMMUStateSys *s = opaque; + + g_assert(addr + size <= RISCV_IOMMU_PCI_MSIX_VECTORS * PCI_MSIX_ENTRY_SIZE); + pci_set_long(s->msix_table + addr, val); +} + +static const MemoryRegionOps msix_table_mmio_ops = { + .read = msix_table_mmio_read, + .write = msix_table_mmio_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 8, + }, + .impl = { + .max_access_size = 4, + }, +}; + +static uint64_t msix_pba_mmio_read(void *opaque, hwaddr addr, + unsigned size) +{ + RISCVIOMMUStateSys *s = opaque; + + return pci_get_long(s->msix_pba + addr); +} + +static void msix_pba_mmio_write(void *opaque, hwaddr addr, + uint64_t val, unsigned size) +{ +} + +static const MemoryRegionOps msix_pba_mmio_ops = { + .read = msix_pba_mmio_read, + .write = msix_pba_mmio_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 8, + }, + .impl = { + .max_access_size = 4, + }, }; +static void riscv_iommu_sysdev_init_msi(RISCVIOMMUStateSys *s, + uint32_t n_vectors) +{ + RISCVIOMMUState *iommu = &s->iommu; + uint32_t table_size = table_size = n_vectors * PCI_MSIX_ENTRY_SIZE; + uint32_t table_offset = RISCV_IOMMU_REG_MSI_CONFIG; + uint32_t pba_size = QEMU_ALIGN_UP(n_vectors, 64) / 8; + uint32_t pba_offset = RISCV_IOMMU_REG_MSI_CONFIG + 256; + + s->msix_table = g_malloc0(table_size); + s->msix_pba = g_malloc0(pba_size); + + memory_region_init_io(&s->msix_table_mmio, OBJECT(s), &msix_table_mmio_ops, + s, "msix-table", table_size); + memory_region_add_subregion(&iommu->regs_mr, table_offset, + &s->msix_table_mmio); + + memory_region_init_io(&s->msix_pba_mmio, OBJECT(s), &msix_pba_mmio_ops, s, + "msix-pba", pba_size); + memory_region_add_subregion(&iommu->regs_mr, pba_offset, + &s->msix_pba_mmio); +} + +static void riscv_iommu_sysdev_send_MSI(RISCVIOMMUStateSys *s, + uint32_t vector) +{ + uint8_t *table_entry = s->msix_table + vector * PCI_MSIX_ENTRY_SIZE; + uint64_t msi_addr = pci_get_quad(table_entry + PCI_MSIX_ENTRY_LOWER_ADDR); + uint32_t msi_data = pci_get_long(table_entry + PCI_MSIX_ENTRY_DATA); + MemTxResult result; + + address_space_stl_le(&address_space_memory, msi_addr, + msi_data, MEMTXATTRS_UNSPECIFIED, &result); + trace_riscv_iommu_sys_msi_sent(vector, msi_addr, msi_data, result); +} + static void riscv_iommu_sysdev_notify(RISCVIOMMUState *iommu, unsigned vector) { RISCVIOMMUStateSys *s = container_of(iommu, RISCVIOMMUStateSys, iommu); uint32_t fctl = riscv_iommu_reg_get32(iommu, RISCV_IOMMU_REG_FCTL); - /* We do not support MSIs yet */ - if (!(fctl & RISCV_IOMMU_FCTL_WSI)) { + if (fctl & RISCV_IOMMU_FCTL_WSI) { + qemu_irq_pulse(s->irqs[vector]); + trace_riscv_iommu_sys_irq_sent(vector); return; } - qemu_irq_pulse(s->irqs[vector]); + riscv_iommu_sysdev_send_MSI(s, vector); } static void riscv_iommu_sys_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void riscv_iommu_sys_realize(DeviceState *dev, Error **errp) irq = qdev_get_gpio_in(s->irqchip, s->base_irq + i); sysbus_connect_irq(sysdev, i, irq); } + + riscv_iommu_sysdev_init_msi(s, RISCV_IOMMU_PCI_MSIX_VECTORS); } static void riscv_iommu_sys_init(Object *obj) @@ -XXX,XX +XXX,XX @@ static void riscv_iommu_sys_init(Object *obj) qdev_alias_all_properties(DEVICE(iommu), obj); iommu->icvec_avail_vectors = RISCV_IOMMU_SYSDEV_ICVEC_VECTORS; - riscv_iommu_set_cap_igs(iommu, RISCV_IOMMU_CAP_IGS_WSI); + riscv_iommu_set_cap_igs(iommu, RISCV_IOMMU_CAP_IGS_BOTH); } static Property riscv_iommu_sys_properties[] = { diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_virtio_iommu(RISCVVirtState *s, uint16_t bdf) } static void create_fdt_iommu_sys(RISCVVirtState *s, uint32_t irq_chip, + uint32_t msi_phandle, uint32_t *iommu_sys_phandle) { const char comp[] = "riscv,iommu"; @@ -XXX,XX +XXX,XX @@ static void create_fdt_iommu_sys(RISCVVirtState *s, uint32_t irq_chip, iommu_irq_map[2], FDT_IRQ_TYPE_EDGE_LOW, iommu_irq_map[3], FDT_IRQ_TYPE_EDGE_LOW); + qemu_fdt_setprop_cell(fdt, iommu_node, "msi-parent", msi_phandle); + *iommu_sys_phandle = iommu_phandle; } @@ -XXX,XX +XXX,XX @@ static void finalize_fdt(RISCVVirtState *s) create_fdt_virtio(s, virt_memmap, irq_virtio_phandle); if (virt_is_iommu_sys_enabled(s)) { - create_fdt_iommu_sys(s, irq_mmio_phandle, &iommu_sys_phandle); + create_fdt_iommu_sys(s, irq_mmio_phandle, msi_pcie_phandle, + &iommu_sys_phandle); } create_fdt_pcie(s, virt_memmap, irq_pcie_phandle, msi_pcie_phandle, iommu_sys_phandle); diff --git a/hw/riscv/trace-events b/hw/riscv/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/trace-events +++ b/hw/riscv/trace-events @@ -XXX,XX +XXX,XX @@ riscv_iommu_icvec_write(uint32_t orig, uint32_t actual) "ICVEC write: incoming 0 riscv_iommu_ats(const char *id, unsigned b, unsigned d, unsigned f, uint64_t iova) "%s: translate request %04x:%02x.%u iova: 0x%"PRIx64 riscv_iommu_ats_inval(const char *id) "%s: dev-iotlb invalidate" riscv_iommu_ats_prgr(const char *id) "%s: dev-iotlb page request group response" +riscv_iommu_sys_irq_sent(uint32_t vector) "IRQ sent to vector %u" +riscv_iommu_sys_msi_sent(uint32_t vector, uint64_t msi_addr, uint32_t msi_data, uint32_t result) "MSI sent to vector %u msi_addr 0x%lx msi_data 0x%x result %u" -- 2.47.1 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Add a riscv_iommu_reset() helper in the base emulation code that implements the expected reset behavior as defined by the riscv-iommu spec. Devices can then use this helper in their own reset callbacks. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20241106133407.604587-7-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu.h | 1 + include/hw/riscv/iommu.h | 6 ++++-- hw/riscv/riscv-iommu-pci.c | 20 ++++++++++++++++++++ hw/riscv/riscv-iommu-sys.c | 20 ++++++++++++++++++++ hw/riscv/riscv-iommu.c | 35 +++++++++++++++++++++++++++++++++++ hw/riscv/trace-events | 2 ++ 6 files changed, 82 insertions(+), 2 deletions(-) diff --git a/hw/riscv/riscv-iommu.h b/hw/riscv/riscv-iommu.h index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.h +++ b/hw/riscv/riscv-iommu.h @@ -XXX,XX +XXX,XX @@ struct RISCVIOMMUState { void riscv_iommu_pci_setup_iommu(RISCVIOMMUState *iommu, PCIBus *bus, Error **errp); void riscv_iommu_set_cap_igs(RISCVIOMMUState *s, riscv_iommu_igs_mode mode); +void riscv_iommu_reset(RISCVIOMMUState *s); /* private helpers */ diff --git a/include/hw/riscv/iommu.h b/include/hw/riscv/iommu.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/riscv/iommu.h +++ b/include/hw/riscv/iommu.h @@ -XXX,XX +XXX,XX @@ typedef struct RISCVIOMMUState RISCVIOMMUState; typedef struct RISCVIOMMUSpace RISCVIOMMUSpace; #define TYPE_RISCV_IOMMU_PCI "riscv-iommu-pci" -OBJECT_DECLARE_SIMPLE_TYPE(RISCVIOMMUStatePci, RISCV_IOMMU_PCI) +OBJECT_DECLARE_TYPE(RISCVIOMMUStatePci, RISCVIOMMUPciClass, RISCV_IOMMU_PCI) typedef struct RISCVIOMMUStatePci RISCVIOMMUStatePci; +typedef struct RISCVIOMMUPciClass RISCVIOMMUPciClass; #define TYPE_RISCV_IOMMU_SYS "riscv-iommu-device" -OBJECT_DECLARE_SIMPLE_TYPE(RISCVIOMMUStateSys, RISCV_IOMMU_SYS) +OBJECT_DECLARE_TYPE(RISCVIOMMUStateSys, RISCVIOMMUSysClass, RISCV_IOMMU_SYS) typedef struct RISCVIOMMUStateSys RISCVIOMMUStateSys; +typedef struct RISCVIOMMUSysClass RISCVIOMMUSysClass; #define FDT_IRQ_TYPE_EDGE_LOW 1 diff --git a/hw/riscv/riscv-iommu-pci.c b/hw/riscv/riscv-iommu-pci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu-pci.c +++ b/hw/riscv/riscv-iommu-pci.c @@ -XXX,XX +XXX,XX @@ #include "cpu_bits.h" #include "riscv-iommu.h" #include "riscv-iommu-bits.h" +#include "trace.h" /* RISC-V IOMMU PCI Device Emulation */ #define RISCV_PCI_CLASS_SYSTEM_IOMMU 0x0806 @@ -XXX,XX +XXX,XX @@ typedef struct RISCVIOMMUStatePci { RISCVIOMMUState iommu; /* common IOMMU state */ } RISCVIOMMUStatePci; +struct RISCVIOMMUPciClass { + /*< public >*/ + DeviceRealize parent_realize; + ResettablePhases parent_phases; +}; + /* interrupt delivery callback */ static void riscv_iommu_pci_notify(RISCVIOMMUState *iommu, unsigned vector) { @@ -XXX,XX +XXX,XX @@ static const Property riscv_iommu_pci_properties[] = { DEFINE_PROP_END_OF_LIST(), }; +static void riscv_iommu_pci_reset_hold(Object *obj, ResetType type) +{ + RISCVIOMMUStatePci *pci = RISCV_IOMMU_PCI(obj); + RISCVIOMMUState *iommu = &pci->iommu; + + riscv_iommu_reset(iommu); + + trace_riscv_iommu_pci_reset_hold(type); +} + static void riscv_iommu_pci_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + rc->phases.hold = riscv_iommu_pci_reset_hold; k->realize = riscv_iommu_pci_realize; k->exit = riscv_iommu_pci_exit; diff --git a/hw/riscv/riscv-iommu-sys.c b/hw/riscv/riscv-iommu-sys.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu-sys.c +++ b/hw/riscv/riscv-iommu-sys.c @@ -XXX,XX +XXX,XX @@ struct RISCVIOMMUStateSys { uint8_t *msix_pba; }; +struct RISCVIOMMUSysClass { + /*< public >*/ + DeviceRealize parent_realize; + ResettablePhases parent_phases; +}; + static uint64_t msix_table_mmio_read(void *opaque, hwaddr addr, unsigned size) { @@ -XXX,XX +XXX,XX @@ static Property riscv_iommu_sys_properties[] = { DEFINE_PROP_END_OF_LIST(), }; +static void riscv_iommu_sys_reset_hold(Object *obj, ResetType type) +{ + RISCVIOMMUStateSys *sys = RISCV_IOMMU_SYS(obj); + RISCVIOMMUState *iommu = &sys->iommu; + + riscv_iommu_reset(iommu); + + trace_riscv_iommu_sys_reset_hold(type); +} + static void riscv_iommu_sys_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + rc->phases.hold = riscv_iommu_sys_reset_hold; + dc->realize = riscv_iommu_sys_realize; set_bit(DEVICE_CATEGORY_MISC, dc->categories); device_class_set_props(dc, riscv_iommu_sys_properties); diff --git a/hw/riscv/riscv-iommu.c b/hw/riscv/riscv-iommu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.c +++ b/hw/riscv/riscv-iommu.c @@ -XXX,XX +XXX,XX @@ static void riscv_iommu_unrealize(DeviceState *dev) g_hash_table_unref(s->ctx_cache); } +void riscv_iommu_reset(RISCVIOMMUState *s) +{ + uint32_t reg_clr; + int ddtp_mode; + + /* + * Clear DDTP while setting DDTP_mode back to user + * initial setting. + */ + ddtp_mode = s->enable_off ? + RISCV_IOMMU_DDTP_MODE_OFF : RISCV_IOMMU_DDTP_MODE_BARE; + s->ddtp = set_field(0, RISCV_IOMMU_DDTP_MODE, ddtp_mode); + riscv_iommu_reg_set64(s, RISCV_IOMMU_REG_DDTP, s->ddtp); + + reg_clr = RISCV_IOMMU_CQCSR_CQEN | RISCV_IOMMU_CQCSR_CIE | + RISCV_IOMMU_CQCSR_CQON | RISCV_IOMMU_CQCSR_BUSY; + riscv_iommu_reg_mod32(s, RISCV_IOMMU_REG_CQCSR, 0, reg_clr); + + reg_clr = RISCV_IOMMU_FQCSR_FQEN | RISCV_IOMMU_FQCSR_FIE | + RISCV_IOMMU_FQCSR_FQON | RISCV_IOMMU_FQCSR_BUSY; + riscv_iommu_reg_mod32(s, RISCV_IOMMU_REG_FQCSR, 0, reg_clr); + + reg_clr = RISCV_IOMMU_PQCSR_PQEN | RISCV_IOMMU_PQCSR_PIE | + RISCV_IOMMU_PQCSR_PQON | RISCV_IOMMU_PQCSR_BUSY; + riscv_iommu_reg_mod32(s, RISCV_IOMMU_REG_PQCSR, 0, reg_clr); + + riscv_iommu_reg_mod64(s, RISCV_IOMMU_REG_TR_REQ_CTL, 0, + RISCV_IOMMU_TR_REQ_CTL_GO_BUSY); + + riscv_iommu_reg_set32(s, RISCV_IOMMU_REG_IPSR, 0); + + g_hash_table_remove_all(s->ctx_cache); + g_hash_table_remove_all(s->iot_cache); +} + static const Property riscv_iommu_properties[] = { DEFINE_PROP_UINT32("version", RISCVIOMMUState, version, RISCV_IOMMU_SPEC_DOT_VER), diff --git a/hw/riscv/trace-events b/hw/riscv/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/trace-events +++ b/hw/riscv/trace-events @@ -XXX,XX +XXX,XX @@ riscv_iommu_ats_inval(const char *id) "%s: dev-iotlb invalidate" riscv_iommu_ats_prgr(const char *id) "%s: dev-iotlb page request group response" riscv_iommu_sys_irq_sent(uint32_t vector) "IRQ sent to vector %u" riscv_iommu_sys_msi_sent(uint32_t vector, uint64_t msi_addr, uint32_t msi_data, uint32_t result) "MSI sent to vector %u msi_addr 0x%lx msi_data 0x%x result %u" +riscv_iommu_sys_reset_hold(int reset_type) "reset type %d" +riscv_iommu_pci_reset_hold(int reset_type) "reset type %d" -- 2.47.1 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20241106133407.604587-8-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- docs/specs/riscv-iommu.rst | 30 +++++++++++++++++++++++++++--- docs/system/riscv/virt.rst | 10 ++++++++++ 2 files changed, 37 insertions(+), 3 deletions(-) diff --git a/docs/specs/riscv-iommu.rst b/docs/specs/riscv-iommu.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/specs/riscv-iommu.rst +++ b/docs/specs/riscv-iommu.rst @@ -XXX,XX +XXX,XX @@ RISC-V IOMMU support for RISC-V machines QEMU implements a RISC-V IOMMU emulation based on the RISC-V IOMMU spec version 1.0 `iommu1.0`_. -The emulation includes a PCI reference device, riscv-iommu-pci, that QEMU -RISC-V boards can use. The 'virt' RISC-V machine is compatible with this -device. +The emulation includes a PCI reference device (riscv-iommu-pci) and a platform +bus device (riscv-iommu-sys) that QEMU RISC-V boards can use. The 'virt' +RISC-V machine is compatible with both devices. riscv-iommu-pci reference device -------------------------------- @@ -XXX,XX +XXX,XX @@ Several options are available to control the capabilities of the device, namely: - "s-stage": enable s-stage support - "g-stage": enable g-stage support +riscv-iommu-sys device +---------------------- + +This device implements the RISC-V IOMMU emulation as a platform bus device that +RISC-V boards can use. + +For the 'virt' board the device is disabled by default. To enable it use the +'iommu-sys' machine option: + +.. code-block:: bash + + $ qemu-system-riscv64 -M virt,iommu-sys=on (...) + +There is no options to configure the capabilities of this device in the 'virt' +board using the QEMU command line. The device is configured with the following +riscv-iommu options: + +- "ioatc-limit": default value (2Mb) +- "intremap": enabled +- "ats": enabled +- "off": on (DMA disabled) +- "s-stage": enabled +- "g-stage": enabled + .. _iommu1.0: https://github.com/riscv-non-isa/riscv-iommu/releases/download/v1.0/riscv-iommu.pdf .. _linux-v8: https://lore.kernel.org/linux-riscv/cover.1718388908.git.tjeznach@rivosinc.com/ diff --git a/docs/system/riscv/virt.rst b/docs/system/riscv/virt.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/riscv/virt.rst +++ b/docs/system/riscv/virt.rst @@ -XXX,XX +XXX,XX @@ command line: $ qemu-system-riscv64 -M virt -device riscv-iommu-pci (...) +It also has support for the riscv-iommu-sys platform device: + +.. code-block:: bash + + $ qemu-system-riscv64 -M virt,iommu-sys=on (...) + Refer to :ref:`riscv-iommu` for more information on how the RISC-V IOMMU support works. @@ -XXX,XX +XXX,XX @@ The following machine-specific options are supported: having AIA IMSIC (i.e. "aia=aplic-imsic" selected). When not specified, the default number of per-HART VS-level AIA IMSIC pages is 0. +- iommu-sys=[on|off] + + Enables the riscv-iommu-sys platform device. Defaults to 'off'. + Running Linux kernel -------------------- -- 2.47.1 From: Anton Blanchard <antonb@tenstorrent.com> Add a CPU entry for the Tenstorrent Ascalon CPU, a series of 2 wide to 8 wide RV64 cores. More details can be found at https://tenstorrent.com/ip/tt-ascalon Signed-off-by: Anton Blanchard <antonb@tenstorrent.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20241113110459.1607299-1-antonb@tenstorrent.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu-qom.h | 1 + target/riscv/cpu.c | 67 ++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 68 insertions(+) diff --git a/target/riscv/cpu-qom.h b/target/riscv/cpu-qom.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu-qom.h +++ b/target/riscv/cpu-qom.h @@ -XXX,XX +XXX,XX @@ #define TYPE_RISCV_CPU_SIFIVE_U54 RISCV_CPU_TYPE_NAME("sifive-u54") #define TYPE_RISCV_CPU_THEAD_C906 RISCV_CPU_TYPE_NAME("thead-c906") #define TYPE_RISCV_CPU_VEYRON_V1 RISCV_CPU_TYPE_NAME("veyron-v1") +#define TYPE_RISCV_CPU_TT_ASCALON RISCV_CPU_TYPE_NAME("tt-ascalon") #define TYPE_RISCV_CPU_HOST RISCV_CPU_TYPE_NAME("host") OBJECT_DECLARE_CPU_TYPE(RISCVCPU, RISCVCPUClass, RISCV_CPU) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static void rv64_veyron_v1_cpu_init(Object *obj) #endif } +/* Tenstorrent Ascalon */ +static void rv64_tt_ascalon_cpu_init(Object *obj) +{ + CPURISCVState *env = &RISCV_CPU(obj)->env; + RISCVCPU *cpu = RISCV_CPU(obj); + + riscv_cpu_set_misa_ext(env, RVG | RVC | RVS | RVU | RVH | RVV); + env->priv_ver = PRIV_VERSION_1_13_0; + + /* Enable ISA extensions */ + cpu->cfg.mmu = true; + cpu->cfg.vlenb = 256 >> 3; + cpu->cfg.elen = 64; + cpu->env.vext_ver = VEXT_VERSION_1_00_0; + cpu->cfg.rvv_ma_all_1s = true; + cpu->cfg.rvv_ta_all_1s = true; + cpu->cfg.misa_w = true; + cpu->cfg.pmp = true; + cpu->cfg.cbom_blocksize = 64; + cpu->cfg.cbop_blocksize = 64; + cpu->cfg.cboz_blocksize = 64; + cpu->cfg.ext_zic64b = true; + cpu->cfg.ext_zicbom = true; + cpu->cfg.ext_zicbop = true; + cpu->cfg.ext_zicboz = true; + cpu->cfg.ext_zicntr = true; + cpu->cfg.ext_zicond = true; + cpu->cfg.ext_zicsr = true; + cpu->cfg.ext_zifencei = true; + cpu->cfg.ext_zihintntl = true; + cpu->cfg.ext_zihintpause = true; + cpu->cfg.ext_zihpm = true; + cpu->cfg.ext_zimop = true; + cpu->cfg.ext_zawrs = true; + cpu->cfg.ext_zfa = true; + cpu->cfg.ext_zfbfmin = true; + cpu->cfg.ext_zfh = true; + cpu->cfg.ext_zfhmin = true; + cpu->cfg.ext_zcb = true; + cpu->cfg.ext_zcmop = true; + cpu->cfg.ext_zba = true; + cpu->cfg.ext_zbb = true; + cpu->cfg.ext_zbs = true; + cpu->cfg.ext_zkt = true; + cpu->cfg.ext_zvbb = true; + cpu->cfg.ext_zvbc = true; + cpu->cfg.ext_zvfbfmin = true; + cpu->cfg.ext_zvfbfwma = true; + cpu->cfg.ext_zvfh = true; + cpu->cfg.ext_zvfhmin = true; + cpu->cfg.ext_zvkng = true; + cpu->cfg.ext_smaia = true; + cpu->cfg.ext_smstateen = true; + cpu->cfg.ext_ssaia = true; + cpu->cfg.ext_sscofpmf = true; + cpu->cfg.ext_sstc = true; + cpu->cfg.ext_svade = true; + cpu->cfg.ext_svinval = true; + cpu->cfg.ext_svnapot = true; + cpu->cfg.ext_svpbmt = true; + +#ifndef CONFIG_USER_ONLY + set_satp_mode_max_supported(cpu, VM_1_10_SV57); +#endif +} + #ifdef CONFIG_TCG static void rv128_base_cpu_init(Object *obj) { @@ -XXX,XX +XXX,XX @@ static const TypeInfo riscv_cpu_type_infos[] = { DEFINE_VENDOR_CPU(TYPE_RISCV_CPU_SIFIVE_U54, MXL_RV64, rv64_sifive_u_cpu_init), DEFINE_VENDOR_CPU(TYPE_RISCV_CPU_SHAKTI_C, MXL_RV64, rv64_sifive_u_cpu_init), DEFINE_VENDOR_CPU(TYPE_RISCV_CPU_THEAD_C906, MXL_RV64, rv64_thead_c906_cpu_init), + DEFINE_VENDOR_CPU(TYPE_RISCV_CPU_TT_ASCALON, MXL_RV64, rv64_tt_ascalon_cpu_init), DEFINE_VENDOR_CPU(TYPE_RISCV_CPU_VEYRON_V1, MXL_RV64, rv64_veyron_v1_cpu_init), #ifdef CONFIG_TCG DEFINE_DYNAMIC_CPU(TYPE_RISCV_CPU_BASE128, MXL_RV128, rv128_base_cpu_init), -- 2.47.1 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> The helper is_kvm_aia() is checking not only for AIA, but for aplic-imsic (i.e. "aia=aplic-imsic" in 'virt' RISC-V machine) with an in-kernel chip present. Rename it to be a bit clear what the helper is doing since we'll add more AIA helpers in the next patches. Make the helper public because the 'virt' machine will use it as well. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20241119191706.718860-2-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/intc/riscv_aplic.h | 1 + hw/intc/riscv_aplic.c | 8 ++++---- 2 files changed, 5 insertions(+), 4 deletions(-) diff --git a/include/hw/intc/riscv_aplic.h b/include/hw/intc/riscv_aplic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/riscv_aplic.h +++ b/include/hw/intc/riscv_aplic.h @@ -XXX,XX +XXX,XX @@ struct RISCVAPLICState { }; void riscv_aplic_add_child(DeviceState *parent, DeviceState *child); +bool riscv_is_kvm_aia_aplic_imsic(bool msimode); DeviceState *riscv_aplic_create(hwaddr addr, hwaddr size, uint32_t hartid_base, uint32_t num_harts, uint32_t num_sources, diff --git a/hw/intc/riscv_aplic.c b/hw/intc/riscv_aplic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/riscv_aplic.c +++ b/hw/intc/riscv_aplic.c @@ -XXX,XX +XXX,XX @@ * KVM AIA only supports APLIC MSI, fallback to QEMU emulation if we want to use * APLIC Wired. */ -static bool is_kvm_aia(bool msimode) +bool riscv_is_kvm_aia_aplic_imsic(bool msimode) { return kvm_irqchip_in_kernel() && msimode; } @@ -XXX,XX +XXX,XX @@ static void riscv_aplic_realize(DeviceState *dev, Error **errp) uint32_t i; RISCVAPLICState *aplic = RISCV_APLIC(dev); - if (!is_kvm_aia(aplic->msimode)) { + if (!riscv_is_kvm_aia_aplic_imsic(aplic->msimode)) { aplic->bitfield_words = (aplic->num_irqs + 31) >> 5; aplic->sourcecfg = g_new0(uint32_t, aplic->num_irqs); aplic->state = g_new0(uint32_t, aplic->num_irqs); @@ -XXX,XX +XXX,XX @@ static void riscv_aplic_realize(DeviceState *dev, Error **errp) * have IRQ lines delegated by their parent APLIC. */ if (!aplic->parent) { - if (kvm_enabled() && is_kvm_aia(aplic->msimode)) { + if (kvm_enabled() && riscv_is_kvm_aia_aplic_imsic(aplic->msimode)) { qdev_init_gpio_in(dev, riscv_kvm_aplic_request, aplic->num_irqs); } else { qdev_init_gpio_in(dev, riscv_aplic_request, aplic->num_irqs); @@ -XXX,XX +XXX,XX @@ DeviceState *riscv_aplic_create(hwaddr addr, hwaddr size, sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); - if (!is_kvm_aia(msimode)) { + if (!riscv_is_kvm_aia_aplic_imsic(msimode)) { sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, addr); } -- 2.47.1 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> In create_fdt_sockets() we have the following pattern: if (kvm_enabled() && virt_use_kvm_aia(s)) { (... do stuff ...) } else { (... do other stuff ...) } if (kvm_enabled() && virt_use_kvm_aia(s)) { (... do more stuff ...) } else { (... do more other stuff) } Do everything in a single if/else clause to reduce the usage of virt_use_kvm_aia() helper and to make the code a bit less repetitive. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20241119191706.718860-3-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_sockets(RISCVVirtState *s, const MemMapEntry *memmap, msi_m_phandle, msi_s_phandle, phandle, &intc_phandles[0], xplic_phandles, ms->smp.cpus); + + *irq_mmio_phandle = xplic_phandles[0]; + *irq_virtio_phandle = xplic_phandles[0]; + *irq_pcie_phandle = xplic_phandles[0]; } else { phandle_pos = ms->smp.cpus; for (socket = (socket_count - 1); socket >= 0; socket--) { @@ -XXX,XX +XXX,XX @@ static void create_fdt_sockets(RISCVVirtState *s, const MemMapEntry *memmap, s->soc[socket].num_harts); } } - } - if (kvm_enabled() && virt_use_kvm_aia(s)) { - *irq_mmio_phandle = xplic_phandles[0]; - *irq_virtio_phandle = xplic_phandles[0]; - *irq_pcie_phandle = xplic_phandles[0]; - } else { for (socket = 0; socket < socket_count; socket++) { if (socket == 0) { *irq_mmio_phandle = xplic_phandles[socket]; -- 2.47.1 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Similar to the riscv_is_kvm_aia_aplic_imsic() helper from riscv_aplic.c, the existing virt_use_kvm_aia() is testing for KVM aia=aplic-imsic with in-kernel irqchip enabled. It is not checking for a generic AIA support. Rename the helper to virt_use_kvm_aia_aplic_imsic() to reflect what the helper is doing, and use the existing riscv_is_kvm_aia_aplic_imsic() to obscure details such as the presence of the in-kernel irqchip. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20241119191706.718860-4-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ #include "hw/virtio/virtio-iommu.h" /* KVM AIA only supports APLIC MSI. APLIC Wired is always emulated by QEMU. */ -static bool virt_use_kvm_aia(RISCVVirtState *s) +static bool virt_use_kvm_aia_aplic_imsic(RISCVVirtAIAType aia_type) { - return kvm_irqchip_in_kernel() && s->aia_type == VIRT_AIA_TYPE_APLIC_IMSIC; + bool msimode = aia_type == VIRT_AIA_TYPE_APLIC_IMSIC; + + return riscv_is_kvm_aia_aplic_imsic(msimode); } static bool virt_aclint_allowed(void) @@ -XXX,XX +XXX,XX @@ static void create_fdt_sockets(RISCVVirtState *s, const MemMapEntry *memmap, *msi_pcie_phandle = msi_s_phandle; } - /* KVM AIA only has one APLIC instance */ - if (kvm_enabled() && virt_use_kvm_aia(s)) { + /* KVM AIA aplic-imsic only has one APLIC instance */ + if (kvm_enabled() && virt_use_kvm_aia_aplic_imsic(s->aia_type)) { create_fdt_socket_aplic(s, memmap, 0, msi_m_phandle, msi_s_phandle, phandle, &intc_phandles[0], xplic_phandles, @@ -XXX,XX +XXX,XX @@ static void virt_machine_init(MachineState *machine) } } - if (kvm_enabled() && virt_use_kvm_aia(s)) { + if (kvm_enabled() && virt_use_kvm_aia_aplic_imsic(s->aia_type)) { kvm_riscv_aia_create(machine, IMSIC_MMIO_GROUP_MIN_SHIFT, VIRT_IRQCHIP_NUM_SOURCES, VIRT_IRQCHIP_NUM_MSIS, memmap[VIRT_APLIC_S].base, -- 2.47.1 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Before adding support to kernel-irqchip=split when using KVM AIA we need to change how we create the in-kernel AIA device. In the use case we have so far, i.e. in-kernel irqchip without split mode, both the s-mode APLIC and IMSIC controllers are provided by the irqchip. In irqchip_split() mode we'll emulate the s-mode APLIC controller, which will send MSIs to the in-kernel IMSIC controller. To do that we need to change kvm_riscv_aia_create() to not create the in-kernel s-mode APLIC controller. In the kernel source arch/riscv/kvm/aia_aplic.c, function kvm_riscv_aia_aplic_init(), we verify that the APLIC controller won't be instantiated by KVM if we do not set 'nr_sources', which is set via KVM_DEV_RISCV_AIA_CONFIG_SRCS. For QEMU this means that we should not set 'aia_irq_num' during kvm_riscv_aia_create() in irqchip_split() mode. In this same condition, skip KVM_DEV_RISCV_AIA_ADDR_APLIC as well since it is used to set the base address for the in-kernel APLIC controller. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20241119191706.718860-5-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/kvm/kvm-cpu.c | 38 +++++++++++++++++++++++--------------- 1 file changed, 23 insertions(+), 15 deletions(-) diff --git a/target/riscv/kvm/kvm-cpu.c b/target/riscv/kvm/kvm-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/kvm/kvm-cpu.c +++ b/target/riscv/kvm/kvm-cpu.c @@ -XXX,XX +XXX,XX @@ void kvm_riscv_aia_create(MachineState *machine, uint64_t group_shift, } } - ret = kvm_device_access(aia_fd, KVM_DEV_RISCV_AIA_GRP_CONFIG, - KVM_DEV_RISCV_AIA_CONFIG_SRCS, - &aia_irq_num, true, NULL); - if (ret < 0) { - error_report("KVM AIA: failed to set number of input irq lines"); - exit(1); - } + /* + * Skip APLIC creation in KVM if we're running split mode. + * This is done by leaving KVM_DEV_RISCV_AIA_CONFIG_SRCS + * unset. We can also skip KVM_DEV_RISCV_AIA_ADDR_APLIC + * since KVM won't be using it. + */ + if (!kvm_kernel_irqchip_split()) { + ret = kvm_device_access(aia_fd, KVM_DEV_RISCV_AIA_GRP_CONFIG, + KVM_DEV_RISCV_AIA_CONFIG_SRCS, + &aia_irq_num, true, NULL); + if (ret < 0) { + error_report("KVM AIA: failed to set number of input irq lines"); + exit(1); + } + + ret = kvm_device_access(aia_fd, KVM_DEV_RISCV_AIA_GRP_ADDR, + KVM_DEV_RISCV_AIA_ADDR_APLIC, + &aplic_base, true, NULL); + if (ret < 0) { + error_report("KVM AIA: failed to set the base address of APLIC"); + exit(1); + } + } ret = kvm_device_access(aia_fd, KVM_DEV_RISCV_AIA_GRP_CONFIG, KVM_DEV_RISCV_AIA_CONFIG_IDS, @@ -XXX,XX +XXX,XX @@ void kvm_riscv_aia_create(MachineState *machine, uint64_t group_shift, exit(1); } - ret = kvm_device_access(aia_fd, KVM_DEV_RISCV_AIA_GRP_ADDR, - KVM_DEV_RISCV_AIA_ADDR_APLIC, - &aplic_base, true, NULL); - if (ret < 0) { - error_report("KVM AIA: failed to set the base address of APLIC"); - exit(1); - } - for (socket = 0; socket < socket_count; socket++) { socket_imsic_base = imsic_base + socket * (1U << group_shift); hart_count = riscv_socket_hart_count(machine, socket); -- 2.47.1 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> The current logic to determine if we don't need an emulated APLIC controller, i.e. KVM will provide for us, is to determine if we're running KVM, with in-kernel irqchip support, and running aia=aplic-imsic. This is modelled by riscv_is_kvm_aia_aplic_imsic() and virt_use_kvm_aia_aplic_imsic(). This won't suffice to support irqchip_split() mode: it will match exactly the same conditions as the one above, but setting the irqchip to 'split' mode will now require us to emulate an APLIC s-mode controller, like we're doing with 'aia=aplic'. Create a new riscv_use_emulated_aplic() helper that will encapsulate this logic. Replace the uses of "riscv_is_kvm_aia_aplic_imsic()" with this helper every time we're taking a decision on emulate an APLIC controller or not. Do the same in virt.c with virt_use_emulated_aplic(). Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20241119191706.718860-6-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/intc/riscv_aplic.h | 1 + hw/intc/riscv_aplic.c | 24 +++++++++++++++++++++--- hw/riscv/virt.c | 14 ++++++++++++-- 3 files changed, 34 insertions(+), 5 deletions(-) diff --git a/include/hw/intc/riscv_aplic.h b/include/hw/intc/riscv_aplic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/riscv_aplic.h +++ b/include/hw/intc/riscv_aplic.h @@ -XXX,XX +XXX,XX @@ struct RISCVAPLICState { void riscv_aplic_add_child(DeviceState *parent, DeviceState *child); bool riscv_is_kvm_aia_aplic_imsic(bool msimode); +bool riscv_use_emulated_aplic(bool msimode); DeviceState *riscv_aplic_create(hwaddr addr, hwaddr size, uint32_t hartid_base, uint32_t num_harts, uint32_t num_sources, diff --git a/hw/intc/riscv_aplic.c b/hw/intc/riscv_aplic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/riscv_aplic.c +++ b/hw/intc/riscv_aplic.c @@ -XXX,XX +XXX,XX @@ #include "target/riscv/cpu.h" #include "sysemu/sysemu.h" #include "sysemu/kvm.h" +#include "sysemu/tcg.h" #include "kvm/kvm_riscv.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ bool riscv_is_kvm_aia_aplic_imsic(bool msimode) return kvm_irqchip_in_kernel() && msimode; } +bool riscv_use_emulated_aplic(bool msimode) +{ +#ifdef CONFIG_KVM + if (tcg_enabled()) { + return true; + } + + if (!riscv_is_kvm_aia_aplic_imsic(msimode)) { + return true; + } + + return kvm_kernel_irqchip_split(); +#else + return true; +#endif +} + static bool riscv_aplic_irq_rectified_val(RISCVAPLICState *aplic, uint32_t irq) { @@ -XXX,XX +XXX,XX @@ static void riscv_aplic_realize(DeviceState *dev, Error **errp) uint32_t i; RISCVAPLICState *aplic = RISCV_APLIC(dev); - if (!riscv_is_kvm_aia_aplic_imsic(aplic->msimode)) { + if (riscv_use_emulated_aplic(aplic->msimode)) { aplic->bitfield_words = (aplic->num_irqs + 31) >> 5; aplic->sourcecfg = g_new0(uint32_t, aplic->num_irqs); aplic->state = g_new0(uint32_t, aplic->num_irqs); @@ -XXX,XX +XXX,XX @@ static void riscv_aplic_realize(DeviceState *dev, Error **errp) * have IRQ lines delegated by their parent APLIC. */ if (!aplic->parent) { - if (kvm_enabled() && riscv_is_kvm_aia_aplic_imsic(aplic->msimode)) { + if (kvm_enabled() && !riscv_use_emulated_aplic(aplic->msimode)) { qdev_init_gpio_in(dev, riscv_kvm_aplic_request, aplic->num_irqs); } else { qdev_init_gpio_in(dev, riscv_aplic_request, aplic->num_irqs); @@ -XXX,XX +XXX,XX @@ DeviceState *riscv_aplic_create(hwaddr addr, hwaddr size, sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); - if (!riscv_is_kvm_aia_aplic_imsic(msimode)) { + if (riscv_use_emulated_aplic(msimode)) { sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, addr); } diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static bool virt_use_kvm_aia_aplic_imsic(RISCVVirtAIAType aia_type) return riscv_is_kvm_aia_aplic_imsic(msimode); } +static bool virt_use_emulated_aplic(RISCVVirtAIAType aia_type) +{ + bool msimode = aia_type == VIRT_AIA_TYPE_APLIC_IMSIC; + + return riscv_use_emulated_aplic(msimode); +} + static bool virt_aclint_allowed(void) { return tcg_enabled() || qtest_enabled(); @@ -XXX,XX +XXX,XX @@ static void create_fdt_sockets(RISCVVirtState *s, const MemMapEntry *memmap, *msi_pcie_phandle = msi_s_phandle; } - /* KVM AIA aplic-imsic only has one APLIC instance */ - if (kvm_enabled() && virt_use_kvm_aia_aplic_imsic(s->aia_type)) { + /* + * With KVM AIA aplic-imsic, using an irqchip without split + * mode, we'll use only one APLIC instance. + */ + if (!virt_use_emulated_aplic(s->aia_type)) { create_fdt_socket_aplic(s, memmap, 0, msi_m_phandle, msi_s_phandle, phandle, &intc_phandles[0], xplic_phandles, -- 2.47.1 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> The last step to enable KVM AIA aplic-imsic with irqchip in split mode is to deal with how MSIs are going to be sent. In our current design we don't allow an APLIC controller to send MSIs unless it's on m-mode. And we also do not allow Supervisor MSI address configuration via the 'smsiaddrcfg' and 'smsiaddrcfgh' registers unless it's also a m-mode APLIC controller. Add a new RISCVACPLICState attribute called 'kvm_msicfgaddr'. This attribute represents the base configuration address for MSIs, in our case the base addr of the IMSIC controller. This attribute is being set only when running irqchip_split() mode with aia=aplic-imsic. During riscv_aplic_msi_send() we'll check if the attribute was set to skip the check for a m-mode APLIC controller and to change the resulting MSI addr by adding kvm_msicfgaddr right before address_space_stl_le(). Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20241119191706.718860-7-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/intc/riscv_aplic.h | 6 +++++ hw/intc/riscv_aplic.c | 42 +++++++++++++++++++++++++++-------- hw/riscv/virt.c | 6 ++++- 3 files changed, 44 insertions(+), 10 deletions(-) diff --git a/include/hw/intc/riscv_aplic.h b/include/hw/intc/riscv_aplic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/riscv_aplic.h +++ b/include/hw/intc/riscv_aplic.h @@ -XXX,XX +XXX,XX @@ struct RISCVAPLICState { uint32_t num_irqs; bool msimode; bool mmode; + + /* To support KVM aia=aplic-imsic with irqchip split mode */ + bool kvm_splitmode; + uint32_t kvm_msicfgaddr; + uint32_t kvm_msicfgaddrH; }; void riscv_aplic_add_child(DeviceState *parent, DeviceState *child); bool riscv_is_kvm_aia_aplic_imsic(bool msimode); bool riscv_use_emulated_aplic(bool msimode); +void riscv_aplic_set_kvm_msicfgaddr(RISCVAPLICState *aplic, hwaddr addr); DeviceState *riscv_aplic_create(hwaddr addr, hwaddr size, uint32_t hartid_base, uint32_t num_harts, uint32_t num_sources, diff --git a/hw/intc/riscv_aplic.c b/hw/intc/riscv_aplic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/riscv_aplic.c +++ b/hw/intc/riscv_aplic.c @@ -XXX,XX +XXX,XX @@ bool riscv_use_emulated_aplic(bool msimode) #endif } +void riscv_aplic_set_kvm_msicfgaddr(RISCVAPLICState *aplic, hwaddr addr) +{ +#ifdef CONFIG_KVM + if (riscv_use_emulated_aplic(aplic->msimode)) { + aplic->kvm_msicfgaddr = extract64(addr, 0, 32); + aplic->kvm_msicfgaddrH = extract64(addr, 32, 32); + } +#endif +} + static bool riscv_aplic_irq_rectified_val(RISCVAPLICState *aplic, uint32_t irq) { @@ -XXX,XX +XXX,XX @@ static void riscv_aplic_msi_send(RISCVAPLICState *aplic, uint32_t lhxs, lhxw, hhxs, hhxw, group_idx, msicfgaddr, msicfgaddrH; aplic_m = aplic; - while (aplic_m && !aplic_m->mmode) { - aplic_m = aplic_m->parent; - } - if (!aplic_m) { - qemu_log_mask(LOG_GUEST_ERROR, "%s: m-level APLIC not found\n", - __func__); - return; + + if (!aplic->kvm_splitmode) { + while (aplic_m && !aplic_m->mmode) { + aplic_m = aplic_m->parent; + } + if (!aplic_m) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: m-level APLIC not found\n", + __func__); + return; + } } if (aplic->mmode) { @@ -XXX,XX +XXX,XX @@ static void riscv_aplic_msi_send(RISCVAPLICState *aplic, addr |= (uint64_t)(guest_idx & APLIC_xMSICFGADDR_PPN_HART(lhxs)); addr <<= APLIC_xMSICFGADDR_PPN_SHIFT; + if (aplic->kvm_splitmode) { + addr |= aplic->kvm_msicfgaddr; + addr |= ((uint64_t)aplic->kvm_msicfgaddrH << 32); + } + address_space_stl_le(&address_space_memory, addr, eiid, MEMTXATTRS_UNSPECIFIED, &result); if (result != MEMTX_OK) { @@ -XXX,XX +XXX,XX @@ static void riscv_aplic_realize(DeviceState *dev, Error **errp) memory_region_init_io(&aplic->mmio, OBJECT(dev), &riscv_aplic_ops, aplic, TYPE_RISCV_APLIC, aplic->aperture_size); sysbus_init_mmio(SYS_BUS_DEVICE(dev), &aplic->mmio); + + if (kvm_enabled()) { + aplic->kvm_splitmode = true; + } } /* @@ -XXX,XX +XXX,XX @@ static const Property riscv_aplic_properties[] = { static const VMStateDescription vmstate_riscv_aplic = { .name = "riscv_aplic", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (const VMStateField[]) { VMSTATE_UINT32(domaincfg, RISCVAPLICState), VMSTATE_UINT32(mmsicfgaddr, RISCVAPLICState), @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_riscv_aplic = { VMSTATE_UINT32(smsicfgaddr, RISCVAPLICState), VMSTATE_UINT32(smsicfgaddrH, RISCVAPLICState), VMSTATE_UINT32(genmsi, RISCVAPLICState), + VMSTATE_UINT32(kvm_msicfgaddr, RISCVAPLICState), + VMSTATE_UINT32(kvm_msicfgaddrH, RISCVAPLICState), VMSTATE_VARRAY_UINT32(sourcecfg, RISCVAPLICState, num_irqs, 0, vmstate_info_uint32, uint32_t), diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static DeviceState *virt_create_aia(RISCVVirtAIAType aia_type, int aia_guests, int base_hartid, int hart_count) { int i; - hwaddr addr; + hwaddr addr = 0; uint32_t guest_bits; DeviceState *aplic_s = NULL; DeviceState *aplic_m = NULL; @@ -XXX,XX +XXX,XX @@ static DeviceState *virt_create_aia(RISCVVirtAIAType aia_type, int aia_guests, VIRT_IRQCHIP_NUM_PRIO_BITS, msimode, false, aplic_m); + if (kvm_enabled() && msimode) { + riscv_aplic_set_kvm_msicfgaddr(RISCV_APLIC(aplic_s), addr); + } + return kvm_enabled() ? aplic_s : aplic_m; } -- 2.47.1 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Remove the 'irqchip_split()' restriction in kvm_arch_init() now that we have support for "-accel kvm,kernel-irqchip=split". Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20241119191706.718860-8-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/kvm/kvm-cpu.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/target/riscv/kvm/kvm-cpu.c b/target/riscv/kvm/kvm-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/kvm/kvm-cpu.c +++ b/target/riscv/kvm/kvm-cpu.c @@ -XXX,XX +XXX,XX @@ int kvm_arch_init(MachineState *ms, KVMState *s) int kvm_arch_irqchip_create(KVMState *s) { - if (kvm_kernel_irqchip_split()) { - error_report("-machine kernel_irqchip=split is not supported on RISC-V."); - exit(1); - } - /* * We can create the VAIA using the newer device control API. */ -- 2.47.1 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Also add a new page, docs/specs/riscv-aia.rst, where we're documenting the state of AIA support in QEMU w.r.t the controllers being emulated or not depending on the AIA and accelerator settings. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20241119191706.718860-9-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- docs/specs/index.rst | 1 + docs/specs/riscv-aia.rst | 83 ++++++++++++++++++++++++++++++++++++++ docs/system/riscv/virt.rst | 7 ++++ 3 files changed, 91 insertions(+) create mode 100644 docs/specs/riscv-aia.rst diff --git a/docs/specs/index.rst b/docs/specs/index.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/specs/index.rst +++ b/docs/specs/index.rst @@ -XXX,XX +XXX,XX @@ guest hardware that is specific to QEMU. rapl-msr rocker riscv-iommu + riscv-aia diff --git a/docs/specs/riscv-aia.rst b/docs/specs/riscv-aia.rst new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/docs/specs/riscv-aia.rst @@ -XXX,XX +XXX,XX @@ +.. _riscv-aia: + +RISC-V AIA support for RISC-V machines +====================================== + +AIA (Advanced Interrupt Architecture) support is implemented in the ``virt`` +RISC-V machine for TCG and KVM accelerators. + +The support consists of two main modes: + +- "aia=aplic": adds one or more APLIC (Advanced Platform Level Interrupt Controller) + devices +- "aia=aplic-imsic": adds one or more APLIC device and an IMSIC (Incoming MSI + Controller) device for each CPU + +From an user standpoint, these modes will behave the same regardless of the accelerator +used. From a developer standpoint the accelerator settings will change what it being +emulated in userspace versus what is being emulated by an in-kernel irqchip. + +When running TCG, all controllers are emulated in userspace, including machine mode +(m-mode) APLIC and IMSIC (when applicable). + +When running KVM: + +- no m-mode is provided, so there is no m-mode APLIC or IMSIC emulation regardless of + the AIA mode chosen +- with "aia=aplic", s-mode APLIC will be emulated by userspace +- with "aia=aplic-imsic" there are two possibilities. If no additional KVM option + is provided there will be no APLIC or IMSIC emulation in userspace, and the virtual + machine will use the provided in-kernel APLIC and IMSIC controllers. If the user + chooses to use the irqchip in split mode via "-accel kvm,kernel-irqchip=split", + s-mode APLIC will be emulated while using the s-mode IMSIC from the irqchip + +The following table summarizes how the AIA and accelerator options defines what +we will emulate in userspace: + + +.. list-table:: How AIA and accel options changes controller emulation + :widths: 25 25 25 25 25 25 25 + :header-rows: 1 + + * - Accel + - Accel props + - AIA type + - APLIC m-mode + - IMSIC m-mode + - APLIC s-mode + - IMSIC s-mode + * - tcg + - --- + - aplic + - emul + - n/a + - emul + - n/a + * - tcg + - --- + - aplic-imsic + - emul + - emul + - emul + - emul + * - kvm + - --- + - aplic + - n/a + - n/a + - emul + - n/a + * - kvm + - none + - aplic-imsic + - n/a + - n/a + - in-kernel + - in-kernel + * - kvm + - irqchip=split + - aplic-imsic + - n/a + - n/a + - emul + - in-kernel diff --git a/docs/system/riscv/virt.rst b/docs/system/riscv/virt.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/riscv/virt.rst +++ b/docs/system/riscv/virt.rst @@ -XXX,XX +XXX,XX @@ The following machine-specific options are supported: MSIs. When not specified, this option is assumed to be "none" which selects SiFive PLIC to handle wired interrupts. + This option also interacts with '-accel kvm'. When using "aia=aplic-imsic" + with KVM, it is possible to set the use of the kernel irqchip in split mode + by using "-accel kvm,kernel-irqchip=split". In this case the ``virt`` machine + will emulate the APLIC controller instead of using the APLIC controller from + the irqchip. See :ref:`riscv-aia` for more details on all available AIA + modes. + - aia-guests=nnn The number of per-HART VS-level AIA IMSIC pages to be emulated for a guest -- 2.47.1 From: Sai Pavan Boddu <sai.pavan.boddu@amd.com> Add a basic board with interrupt controller (intc), timer, serial (uartlite), small memory called LMB@0 (128kB) and DDR@0x80000000 (configured via command line eg. -m 2g). This is basic configuration which matches HW generated out of AMD Vivado (design tools). But initial configuration is going beyond what it is configured by default because validation should be done on other configurations too. That's why wire also additional uart16500, axi ethernet(with axi dma). GPIOs, i2c and qspi is also listed for completeness. IRQ map is: (addr) 0 - timer (0x41c00000) 1 - uartlite (0x40600000) 2 - i2c (0x40800000) 3 - qspi (0x44a00000) 4 - uart16550 (0x44a10000) 5 - emaclite (0x40e00000) 6 - timer2 (0x41c10000) 7 - axi emac (0x40c00000) 8 - axi dma (0x41e00000) 9 - axi dma 10 - gpio (0x40000000) 11 - gpio2 (0x40010000) 12 - gpio3 (0x40020000) Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@amd.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20241125134739.18189-1-sai.pavan.boddu@amd.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- MAINTAINERS | 6 + docs/system/riscv/microblaze-v-generic.rst | 42 +++++ docs/system/target-riscv.rst | 1 + hw/riscv/microblaze-v-generic.c | 184 +++++++++++++++++++++ hw/riscv/Kconfig | 8 + hw/riscv/meson.build | 1 + 6 files changed, 242 insertions(+) create mode 100644 docs/system/riscv/microblaze-v-generic.rst create mode 100644 hw/riscv/microblaze-v-generic.c diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: docs/system/riscv/sifive_u.rst F: hw/*/*sifive*.c F: include/hw/*/*sifive*.h +AMD Microblaze-V Generic Board +M: Sai Pavan Boddu <sai.pavan.boddu@amd.com> +S: Maintained +F: hw/riscv/microblaze-v-generic.c +F: docs/system/riscv/microblaze-v-generic.rst + RX Machines ----------- rx-gdbsim diff --git a/docs/system/riscv/microblaze-v-generic.rst b/docs/system/riscv/microblaze-v-generic.rst new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/docs/system/riscv/microblaze-v-generic.rst @@ -XXX,XX +XXX,XX @@ +Microblaze-V generic board (``amd-microblaze-v-generic``) +========================================================= +The AMD MicroBlaze™ V processor is a soft-core RISC-V processor IP for AMD +adaptive SoCs and FPGAs. The MicroBlaze™ V processor is based on the 32-bit (or +64-bit) RISC-V instruction set architecture (ISA) and contains interfaces +compatible with the classic MicroBlaze™ V processor (i.e it is a drop in +replacement for the classic MicroBlaze™ processor in existing RTL designs). +More information can be found in below document. + +https://docs.amd.com/r/en-US/ug1629-microblaze-v-user-guide/MicroBlaze-V-Architecture + +The MicroBlaze™ V generic board in QEMU has following supported devices: + + - timer + - uartlite + - uart16550 + - emaclite + - timer2 + - axi emac + - axi dma + +The MicroBlaze™ V core in QEMU has the following configuration: + + - RV32I base integer instruction set + - "Zicsr" Control and Status register instructions + - "Zifencei" instruction-fetch + - Extensions: m, a, f, c + +Running +""""""" +Below is an example command line for launching mainline U-boot +(xilinx_mbv32_defconfig) on the Microblaze-V generic board. + +.. code-block:: bash + + $ qemu-system-riscv32 -M amd-microblaze-v-generic \ + -display none \ + -device loader,addr=0x80000000,file=u-boot-spl.bin,cpu-num=0 \ + -device loader,addr=0x80200000,file=u-boot.img \ + -serial mon:stdio \ + -device loader,addr=0x83000000,file=system.dtb \ + -m 2g diff --git a/docs/system/target-riscv.rst b/docs/system/target-riscv.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/target-riscv.rst +++ b/docs/system/target-riscv.rst @@ -XXX,XX +XXX,XX @@ undocumented; you can get a complete list by running .. toctree:: :maxdepth: 1 + riscv/microblaze-v-generic riscv/microchip-icicle-kit riscv/shakti-c riscv/sifive_u diff --git a/hw/riscv/microblaze-v-generic.c b/hw/riscv/microblaze-v-generic.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/riscv/microblaze-v-generic.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU model of Microblaze V generic board. + * + * based on hw/microblaze/petalogix_ml605_mmu.c + * + * Copyright (c) 2011 Michal Simek <monstr@monstr.eu> + * Copyright (c) 2011 PetaLogix + * Copyright (c) 2009 Edgar E. Iglesias. + * Copyright (C) 2024, Advanced Micro Devices, Inc. + * SPDX-License-Identifier: GPL-2.0-or-later + * + * Written by Sai Pavan Boddu <sai.pavan.boddu@amd.com + * and by Michal Simek <michal.simek@amd.com>. + */ + +#include "qemu/osdep.h" +#include "qemu/units.h" +#include "qapi/error.h" +#include "cpu.h" +#include "hw/sysbus.h" +#include "sysemu/sysemu.h" +#include "net/net.h" +#include "hw/boards.h" +#include "hw/char/serial-mm.h" +#include "exec/address-spaces.h" +#include "hw/char/xilinx_uartlite.h" +#include "hw/misc/unimp.h" + +#define LMB_BRAM_SIZE (128 * KiB) +#define MEMORY_BASEADDR 0x80000000 +#define INTC_BASEADDR 0x41200000 +#define TIMER_BASEADDR 0x41c00000 +#define TIMER_BASEADDR2 0x41c10000 +#define UARTLITE_BASEADDR 0x40600000 +#define ETHLITE_BASEADDR 0x40e00000 +#define UART16550_BASEADDR 0x44a10000 +#define AXIENET_BASEADDR 0x40c00000 +#define AXIDMA_BASEADDR 0x41e00000 +#define GPIO_BASEADDR 0x40000000 +#define GPIO_BASEADDR2 0x40010000 +#define GPIO_BASEADDR3 0x40020000 +#define I2C_BASEADDR 0x40800000 +#define QSPI_BASEADDR 0x44a00000 + +#define TIMER_IRQ 0 +#define UARTLITE_IRQ 1 +#define UART16550_IRQ 4 +#define ETHLITE_IRQ 5 +#define TIMER_IRQ2 6 +#define AXIENET_IRQ 7 +#define AXIDMA_IRQ1 8 +#define AXIDMA_IRQ0 9 + +static void mb_v_generic_init(MachineState *machine) +{ + ram_addr_t ram_size = machine->ram_size; + DeviceState *dev, *dma, *eth0; + Object *ds, *cs; + int i; + RISCVCPU *cpu; + hwaddr ddr_base = MEMORY_BASEADDR; + MemoryRegion *phys_lmb_bram = g_new(MemoryRegion, 1); + MemoryRegion *phys_ram = g_new(MemoryRegion, 1); + qemu_irq irq[32]; + MemoryRegion *sysmem = get_system_memory(); + + cpu = RISCV_CPU(object_new(machine->cpu_type)); + object_property_set_bool(OBJECT(cpu), "h", false, NULL); + object_property_set_bool(OBJECT(cpu), "d", false, NULL); + qdev_realize(DEVICE(cpu), NULL, &error_abort); + /* Attach emulated BRAM through the LMB. */ + memory_region_init_ram(phys_lmb_bram, NULL, + "mb_v.lmb_bram", LMB_BRAM_SIZE, + &error_fatal); + memory_region_add_subregion(sysmem, 0x00000000, phys_lmb_bram); + + memory_region_init_ram(phys_ram, NULL, "mb_v.ram", + ram_size, &error_fatal); + memory_region_add_subregion(sysmem, ddr_base, phys_ram); + + dev = qdev_new("xlnx.xps-intc"); + qdev_prop_set_uint32(dev, "kind-of-intr", + 1 << UARTLITE_IRQ); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, INTC_BASEADDR); + sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, + qdev_get_gpio_in(DEVICE(cpu), 11)); + for (i = 0; i < 32; i++) { + irq[i] = qdev_get_gpio_in(dev, i); + } + + /* Uartlite */ + dev = qdev_new(TYPE_XILINX_UARTLITE); + qdev_prop_set_chr(dev, "chardev", serial_hd(0)); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, UARTLITE_BASEADDR); + sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, irq[UARTLITE_IRQ]); + + /* Full uart */ + serial_mm_init(sysmem, UART16550_BASEADDR + 0x1000, 2, + irq[UART16550_IRQ], 115200, serial_hd(1), + DEVICE_LITTLE_ENDIAN); + + /* 2 timers at irq 0 @ 100 Mhz. */ + dev = qdev_new("xlnx.xps-timer"); + qdev_prop_set_uint32(dev, "one-timer-only", 0); + qdev_prop_set_uint32(dev, "clock-frequency", 100000000); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, TIMER_BASEADDR); + sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, irq[TIMER_IRQ]); + + /* 2 timers at irq 3 @ 100 Mhz. */ + dev = qdev_new("xlnx.xps-timer"); + qdev_prop_set_uint32(dev, "one-timer-only", 0); + qdev_prop_set_uint32(dev, "clock-frequency", 100000000); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, TIMER_BASEADDR2); + sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, irq[TIMER_IRQ2]); + + /* Emaclite */ + dev = qdev_new("xlnx.xps-ethernetlite"); + qemu_configure_nic_device(dev, true, NULL); + qdev_prop_set_uint32(dev, "tx-ping-pong", 0); + qdev_prop_set_uint32(dev, "rx-ping-pong", 0); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, ETHLITE_BASEADDR); + sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, irq[ETHLITE_IRQ]); + + /* axi ethernet and dma initialization. */ + eth0 = qdev_new("xlnx.axi-ethernet"); + dma = qdev_new("xlnx.axi-dma"); + + /* FIXME: attach to the sysbus instead */ + object_property_add_child(qdev_get_machine(), "xilinx-eth", OBJECT(eth0)); + object_property_add_child(qdev_get_machine(), "xilinx-dma", OBJECT(dma)); + + ds = object_property_get_link(OBJECT(dma), + "axistream-connected-target", NULL); + cs = object_property_get_link(OBJECT(dma), + "axistream-control-connected-target", NULL); + qemu_configure_nic_device(eth0, true, NULL); + qdev_prop_set_uint32(eth0, "rxmem", 0x1000); + qdev_prop_set_uint32(eth0, "txmem", 0x1000); + object_property_set_link(OBJECT(eth0), "axistream-connected", ds, + &error_abort); + object_property_set_link(OBJECT(eth0), "axistream-control-connected", cs, + &error_abort); + sysbus_realize_and_unref(SYS_BUS_DEVICE(eth0), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(eth0), 0, AXIENET_BASEADDR); + sysbus_connect_irq(SYS_BUS_DEVICE(eth0), 0, irq[AXIENET_IRQ]); + + ds = object_property_get_link(OBJECT(eth0), + "axistream-connected-target", NULL); + cs = object_property_get_link(OBJECT(eth0), + "axistream-control-connected-target", NULL); + qdev_prop_set_uint32(dma, "freqhz", 100000000); + object_property_set_link(OBJECT(dma), "axistream-connected", ds, + &error_abort); + object_property_set_link(OBJECT(dma), "axistream-control-connected", cs, + &error_abort); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dma), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(dma), 0, AXIDMA_BASEADDR); + sysbus_connect_irq(SYS_BUS_DEVICE(dma), 0, irq[AXIDMA_IRQ0]); + sysbus_connect_irq(SYS_BUS_DEVICE(dma), 1, irq[AXIDMA_IRQ1]); + + /* unimplemented devices */ + create_unimplemented_device("gpio", GPIO_BASEADDR, 0x10000); + create_unimplemented_device("gpio2", GPIO_BASEADDR2, 0x10000); + create_unimplemented_device("gpio3", GPIO_BASEADDR3, 0x10000); + create_unimplemented_device("i2c", I2C_BASEADDR, 0x10000); + create_unimplemented_device("qspi", QSPI_BASEADDR, 0x10000); +} + +static void mb_v_generic_machine_init(MachineClass *mc) +{ + mc->desc = "AMD Microblaze-V generic platform"; + mc->init = mb_v_generic_init; + mc->min_cpus = 1; + mc->max_cpus = 1; + mc->default_cpu_type = TYPE_RISCV_CPU_BASE; + mc->default_cpus = 1; +} + +DEFINE_MACHINE("amd-microblaze-v-generic", mb_v_generic_machine_init) diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/Kconfig +++ b/hw/riscv/Kconfig @@ -XXX,XX +XXX,XX @@ config MICROCHIP_PFSOC select SIFIVE_PLIC select UNIMP +config MICROBLAZE_V + bool + default y + depends on RISCV32 || RISCV64 + select XILINX + select XILINX_AXI + select XILINX_ETHLITE + config OPENTITAN bool default y diff --git a/hw/riscv/meson.build b/hw/riscv/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/meson.build +++ b/hw/riscv/meson.build @@ -XXX,XX +XXX,XX @@ riscv_ss.add(when: 'CONFIG_SPIKE', if_true: files('spike.c')) riscv_ss.add(when: 'CONFIG_MICROCHIP_PFSOC', if_true: files('microchip_pfsoc.c')) riscv_ss.add(when: 'CONFIG_ACPI', if_true: files('virt-acpi-build.c')) riscv_ss.add(when: 'CONFIG_RISCV_IOMMU', if_true: files('riscv-iommu.c', 'riscv-iommu-pci.c', 'riscv-iommu-sys.c')) +riscv_ss.add(when: 'CONFIG_MICROBLAZE_V', if_true: files('microblaze-v-generic.c')) hw_arch += {'riscv': riscv_ss} -- 2.47.1 From: Sia Jee Heng <jeeheng.sia@starfivetech.com> Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com> Reviewed-by: Sunil V L <sunilvl@ventanamicro.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20241028015744.624943-2-jeeheng.sia@starfivetech.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- tests/qtest/bios-tables-test-allowed-diff.h | 1 + 1 file changed, 1 insertion(+) diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test-allowed-diff.h +++ b/tests/qtest/bios-tables-test-allowed-diff.h @@ -1 +1,2 @@ /* List of comma-separated changed AML files to ignore */ +"tests/data/acpi/riscv64/virt/SPCR", -- 2.47.1 From: Sia Jee Heng <jeeheng.sia@starfivetech.com> Update the SPCR table to accommodate the SPCR Table revision 4 [1]. The SPCR table has been modified to adhere to the revision 4 format [2]. [1]: https://learn.microsoft.com/en-us/windows-hardware/drivers/serports/serial-port-console-redirection-table [2]: https://github.com/acpica/acpica/pull/931 Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com> Reviewed-by: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bibo Mao <maobibo@loongson.cn> Message-ID: <20241028015744.624943-3-jeeheng.sia@starfivetech.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/acpi/acpi-defs.h | 7 +++++-- include/hw/acpi/aml-build.h | 2 +- hw/acpi/aml-build.c | 20 ++++++++++++++++---- hw/arm/virt-acpi-build.c | 8 ++++++-- hw/loongarch/acpi-build.c | 6 +++++- hw/riscv/virt-acpi-build.c | 12 +++++++++--- 6 files changed, 42 insertions(+), 13 deletions(-) diff --git a/include/hw/acpi/acpi-defs.h b/include/hw/acpi/acpi-defs.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/acpi/acpi-defs.h +++ b/include/hw/acpi/acpi-defs.h @@ -XXX,XX +XXX,XX @@ typedef struct AcpiSpcrData { uint8_t flow_control; uint8_t terminal_type; uint8_t language; - uint8_t reserved1; uint16_t pci_device_id; /* Must be 0xffff if not PCI device */ uint16_t pci_vendor_id; /* Must be 0xffff if not PCI device */ uint8_t pci_bus; @@ -XXX,XX +XXX,XX @@ typedef struct AcpiSpcrData { uint8_t pci_function; uint32_t pci_flags; uint8_t pci_segment; - uint32_t reserved2; + uint32_t uart_clk_freq; + uint32_t precise_baudrate; + uint32_t namespace_string_length; + uint32_t namespace_string_offset; + char namespace_string[]; } AcpiSpcrData; #define ACPI_FADT_ARM_PSCI_COMPLIANT (1 << 0) diff --git a/include/hw/acpi/aml-build.h b/include/hw/acpi/aml-build.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/acpi/aml-build.h +++ b/include/hw/acpi/aml-build.h @@ -XXX,XX +XXX,XX @@ void build_tpm2(GArray *table_data, BIOSLinker *linker, GArray *tcpalog, void build_spcr(GArray *table_data, BIOSLinker *linker, const AcpiSpcrData *f, const uint8_t rev, - const char *oem_id, const char *oem_table_id); + const char *oem_id, const char *oem_table_id, const char *name); #endif diff --git a/hw/acpi/aml-build.c b/hw/acpi/aml-build.c index XXXXXXX..XXXXXXX 100644 --- a/hw/acpi/aml-build.c +++ b/hw/acpi/aml-build.c @@ -XXX,XX +XXX,XX @@ static void build_processor_hierarchy_node(GArray *tbl, uint32_t flags, void build_spcr(GArray *table_data, BIOSLinker *linker, const AcpiSpcrData *f, const uint8_t rev, - const char *oem_id, const char *oem_table_id) + const char *oem_id, const char *oem_table_id, const char *name) { AcpiTable table = { .sig = "SPCR", .rev = rev, .oem_id = oem_id, .oem_table_id = oem_table_id }; @@ -XXX,XX +XXX,XX @@ void build_spcr(GArray *table_data, BIOSLinker *linker, build_append_int_noprefix(table_data, f->pci_flags, 4); /* PCI Segment */ build_append_int_noprefix(table_data, f->pci_segment, 1); - /* Reserved */ - build_append_int_noprefix(table_data, 0, 4); - + if (rev < 4) { + /* Reserved */ + build_append_int_noprefix(table_data, 0, 4); + } else { + /* UartClkFreq */ + build_append_int_noprefix(table_data, f->uart_clk_freq, 4); + /* PreciseBaudrate */ + build_append_int_noprefix(table_data, f->precise_baudrate, 4); + /* NameSpaceStringLength */ + build_append_int_noprefix(table_data, f->namespace_string_length, 2); + /* NameSpaceStringOffset */ + build_append_int_noprefix(table_data, f->namespace_string_offset, 2); + /* NamespaceString[] */ + g_array_append_vals(table_data, name, f->namespace_string_length); + } acpi_table_end(linker, &table); } /* diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt-acpi-build.c +++ b/hw/arm/virt-acpi-build.c @@ -XXX,XX +XXX,XX @@ spcr_setup(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) .pci_flags = 0, .pci_segment = 0, }; - - build_spcr(table_data, linker, &serial, 2, vms->oem_id, vms->oem_table_id); + /* + * Passing NULL as the SPCR Table for Revision 2 doesn't support + * NameSpaceString. + */ + build_spcr(table_data, linker, &serial, 2, vms->oem_id, vms->oem_table_id, + NULL); } /* diff --git a/hw/loongarch/acpi-build.c b/hw/loongarch/acpi-build.c index XXXXXXX..XXXXXXX 100644 --- a/hw/loongarch/acpi-build.c +++ b/hw/loongarch/acpi-build.c @@ -XXX,XX +XXX,XX @@ spcr_setup(GArray *table_data, BIOSLinker *linker, MachineState *machine) }; lvms = LOONGARCH_VIRT_MACHINE(machine); + /* + * Passing NULL as the SPCR Table for Revision 2 doesn't support + * NameSpaceString. + */ build_spcr(table_data, linker, &serial, 2, lvms->oem_id, - lvms->oem_table_id); + lvms->oem_table_id, NULL); } typedef diff --git a/hw/riscv/virt-acpi-build.c b/hw/riscv/virt-acpi-build.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt-acpi-build.c +++ b/hw/riscv/virt-acpi-build.c @@ -XXX,XX +XXX,XX @@ acpi_dsdt_add_uart(Aml *scope, const MemMapEntry *uart_memmap, /* * Serial Port Console Redirection Table (SPCR) - * Rev: 1.07 + * Rev: 1.10 */ static void spcr_setup(GArray *table_data, BIOSLinker *linker, RISCVVirtState *s) { + const char name[] = "."; AcpiSpcrData serial = { - .interface_type = 0, /* 16550 compatible */ + .interface_type = 0x12, /* 16550 compatible */ .base_addr.id = AML_AS_SYSTEM_MEMORY, .base_addr.width = 32, .base_addr.offset = 0, @@ -XXX,XX +XXX,XX @@ spcr_setup(GArray *table_data, BIOSLinker *linker, RISCVVirtState *s) .pci_function = 0, .pci_flags = 0, .pci_segment = 0, + .uart_clk_freq = 0, + .precise_baudrate = 0, + .namespace_string_length = sizeof(name), + .namespace_string_offset = 88, }; - build_spcr(table_data, linker, &serial, 2, s->oem_id, s->oem_table_id); + build_spcr(table_data, linker, &serial, 4, s->oem_id, s->oem_table_id, + name); } /* RHCT Node[N] starts at offset 56 */ -- 2.47.1 From: Sia Jee Heng <jeeheng.sia@starfivetech.com> Update the virt SPCR golden reference file for RISC-V to accommodate the SPCR Table revision 4 [1], utilizing the iasl binary compiled from the latest ACPICA repository. The SPCR table has been modified to adhere to the revision 4 format [2]. [1]: https://learn.microsoft.com/en-us/windows-hardware/drivers/serports/serial-port-console-redirection-table [2]: https://github.com/acpica/acpica/pull/931 Diffs from iasl: /* * Intel ACPI Component Architecture * AML/ASL+ Disassembler version 20200925 (64-bit version) * Copyright (c) 2000 - 2020 Intel Corporation * - * Disassembly of tests/data/acpi/riscv64/virt/SPCR, Wed Aug 28 18:28:19 2024 + * Disassembly of /tmp/aml-MN0NS2, Wed Aug 28 18:28:19 2024 * * ACPI Data Table [SPCR] * * Format: [HexOffset DecimalOffset ByteLength] FieldName : FieldValue */ [000h 0000 4] Signature : "SPCR" [Serial Port Console Redirection table] -[004h 0004 4] Table Length : 00000050 -[008h 0008 1] Revision : 02 -[009h 0009 1] Checksum : B9 +[004h 0004 4] Table Length : 0000005A +[008h 0008 1] Revision : 04 +[009h 0009 1] Checksum : 13 [00Ah 0010 6] Oem ID : "BOCHS " [010h 0016 8] Oem Table ID : "BXPC " [018h 0024 4] Oem Revision : 00000001 [01Ch 0028 4] Asl Compiler ID : "BXPC" [020h 0032 4] Asl Compiler Revision : 00000001 -[024h 0036 1] Interface Type : 00 +[024h 0036 1] Interface Type : 12 [025h 0037 3] Reserved : 000000 [028h 0040 12] Serial Port Register : [Generic Address Structure] [028h 0040 1] Space ID : 00 [SystemMemory] [029h 0041 1] Bit Width : 20 [02Ah 0042 1] Bit Offset : 00 [02Bh 0043 1] Encoded Access Width : 01 [Byte Access:8] [02Ch 0044 8] Address : 0000000010000000 [034h 0052 1] Interrupt Type : 10 [035h 0053 1] PCAT-compatible IRQ : 00 [036h 0054 4] Interrupt : 0000000A [03Ah 0058 1] Baud Rate : 07 [03Bh 0059 1] Parity : 00 [03Ch 0060 1] Stop Bits : 01 [03Dh 0061 1] Flow Control : 00 [03Eh 0062 1] Terminal Type : 00 [04Ch 0076 1] Reserved : 00 [040h 0064 2] PCI Device ID : FFFF [042h 0066 2] PCI Vendor ID : FFFF [044h 0068 1] PCI Bus : 00 [045h 0069 1] PCI Device : 00 [046h 0070 1] PCI Function : 00 [047h 0071 4] PCI Flags : 00000000 [04Bh 0075 1] PCI Segment : 00 -[04Ch 0076 4] Reserved : 00000000 +[04Ch 0076 004h] Uart Clock Freq : 00000000 +[050h 0080 004h] Precise Baud rate : 00000000 +[054h 0084 002h] NameSpaceStringLength : 0002 +[056h 0086 002h] NameSpaceStringOffset : 0058 +[058h 0088 002h] NamespaceString : "." -Raw Table Data: Length 80 (0x50) +Raw Table Data: Length 90 (0x5A) - 0000: 53 50 43 52 50 00 00 00 02 B9 42 4F 43 48 53 20 // SPCRP.....BOCHS + 0000: 53 50 43 52 5A 00 00 00 04 13 42 4F 43 48 53 20 // SPCRZ.....BOCHS 0010: 42 58 50 43 20 20 20 20 01 00 00 00 42 58 50 43 // BXPC ....BXPC - 0020: 01 00 00 00 00 00 00 00 00 20 00 01 00 00 00 10 // ......... ...... + 0020: 01 00 00 00 12 00 00 00 00 20 00 01 00 00 00 10 // ......... ...... 0030: 00 00 00 00 10 00 0A 00 00 00 07 00 01 00 00 03 // ................ 0040: FF FF FF FF 00 00 00 00 00 00 00 00 00 00 00 00 // ................ + 0050: 00 00 00 00 02 00 58 00 2E 00 // ......X... Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com> Reviewed-by: Sunil V L <sunilvl@ventanamicro.com> Message-ID: <20241028015744.624943-4-jeeheng.sia@starfivetech.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- tests/qtest/bios-tables-test-allowed-diff.h | 1 - tests/data/acpi/riscv64/virt/SPCR | Bin 80 -> 90 bytes 2 files changed, 1 deletion(-) diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test-allowed-diff.h +++ b/tests/qtest/bios-tables-test-allowed-diff.h @@ -1,2 +1 @@ /* List of comma-separated changed AML files to ignore */ -"tests/data/acpi/riscv64/virt/SPCR", diff --git a/tests/data/acpi/riscv64/virt/SPCR b/tests/data/acpi/riscv64/virt/SPCR index XXXXXXX..XXXXXXX 100644 Binary files a/tests/data/acpi/riscv64/virt/SPCR and b/tests/data/acpi/riscv64/virt/SPCR differ -- 2.47.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> The HTIF interface is RISC-V specific, add it within the MAINTAINERS section covering hw/riscv/. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20241129154304.34946-2-philmd@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- MAINTAINERS | 2 ++ 1 file changed, 2 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ S: Supported F: configs/targets/riscv* F: docs/system/target-riscv.rst F: target/riscv/ +F: hw/char/riscv_htif.c F: hw/riscv/ F: hw/intc/riscv* +F: include/hw/char/riscv_htif.h F: include/hw/riscv/ F: linux-user/host/riscv32/ F: linux-user/host/riscv64/ -- 2.47.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Since our RISC-V system emulation is only built for little endian, the HTIF device aims to interface with little endian memory accesses, thus we can explicit htif_mm_ops:endianness being DEVICE_LITTLE_ENDIAN. In that case tswap64() is equivalent to le64_to_cpu(), as in "convert this 64-bit little-endian value into host cpu order". Replace to simplify. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20241129154304.34946-3-philmd@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/char/riscv_htif.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/hw/char/riscv_htif.c b/hw/char/riscv_htif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/riscv_htif.c +++ b/hw/char/riscv_htif.c @@ -XXX,XX +XXX,XX @@ #include "qemu/timer.h" #include "qemu/error-report.h" #include "exec/address-spaces.h" -#include "exec/tswap.h" +#include "qemu/bswap.h" #include "sysemu/dma.h" #include "sysemu/runstate.h" @@ -XXX,XX +XXX,XX @@ static void htif_handle_tohost_write(HTIFState *s, uint64_t val_written) } else { uint64_t syscall[8]; cpu_physical_memory_read(payload, syscall, sizeof(syscall)); - if (tswap64(syscall[0]) == PK_SYS_WRITE && - tswap64(syscall[1]) == HTIF_DEV_CONSOLE && - tswap64(syscall[3]) == HTIF_CONSOLE_CMD_PUTC) { + if (le64_to_cpu(syscall[0]) == PK_SYS_WRITE && + le64_to_cpu(syscall[1]) == HTIF_DEV_CONSOLE && + le64_to_cpu(syscall[3]) == HTIF_CONSOLE_CMD_PUTC) { uint8_t ch; - cpu_physical_memory_read(tswap64(syscall[2]), &ch, 1); + cpu_physical_memory_read(le64_to_cpu(syscall[2]), &ch, 1); /* * XXX this blocks entire thread. Rewrite to use * qemu_chr_fe_write and background I/O callbacks @@ -XXX,XX +XXX,XX @@ static void htif_mm_write(void *opaque, hwaddr addr, static const MemoryRegionOps htif_mm_ops = { .read = htif_mm_read, .write = htif_mm_write, + .endianness = DEVICE_LITTLE_ENDIAN, }; HTIFState *htif_mm_init(MemoryRegion *address_space, Chardev *chr, -- 2.47.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Looking at htif_mm_ops[] read/write handlers, we notice they expect 32-bit values to accumulate into to the 'fromhost' and 'tohost' 64-bit variables. Explicit by setting the .impl min/max fields. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20241129154304.34946-4-philmd@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/char/riscv_htif.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/hw/char/riscv_htif.c b/hw/char/riscv_htif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/riscv_htif.c +++ b/hw/char/riscv_htif.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps htif_mm_ops = { .read = htif_mm_read, .write = htif_mm_write, .endianness = DEVICE_LITTLE_ENDIAN, + .impl = { + .min_access_size = 4, + .max_access_size = 4, + }, }; HTIFState *htif_mm_init(MemoryRegion *address_space, Chardev *chr, -- 2.47.1 From: Jim Shu <jim.shu@sifive.com> Larger initrd image will overlap the DTB at 3GB address. Since 64-bit system doesn't have 32-bit addressable issue, we just load DTB to the end of dram in 64-bit system. Signed-off-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20241120153935.24706-2-jim.shu@sifive.com> [ Changes by AF - Store fdt_load_addr_hi32 in the reset vector ] Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/riscv/boot.h | 2 +- hw/riscv/boot.c | 14 +++++++++----- hw/riscv/microchip_pfsoc.c | 4 ++-- hw/riscv/sifive_u.c | 8 +++++--- hw/riscv/spike.c | 4 ++-- hw/riscv/virt.c | 2 +- 6 files changed, 20 insertions(+), 14 deletions(-) diff --git a/include/hw/riscv/boot.h b/include/hw/riscv/boot.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/riscv/boot.h +++ b/include/hw/riscv/boot.h @@ -XXX,XX +XXX,XX @@ target_ulong riscv_load_kernel(MachineState *machine, bool load_initrd, symbol_fn_t sym_cb); uint64_t riscv_compute_fdt_addr(hwaddr dram_start, uint64_t dram_size, - MachineState *ms); + MachineState *ms, RISCVHartArrayState *harts); void riscv_load_fdt(hwaddr fdt_addr, void *fdt); void riscv_setup_rom_reset_vec(MachineState *machine, RISCVHartArrayState *harts, hwaddr saddr, diff --git a/hw/riscv/boot.c b/hw/riscv/boot.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/boot.c +++ b/hw/riscv/boot.c @@ -XXX,XX +XXX,XX @@ out: * The FDT is fdt_packed() during the calculation. */ uint64_t riscv_compute_fdt_addr(hwaddr dram_base, hwaddr dram_size, - MachineState *ms) + MachineState *ms, RISCVHartArrayState *harts) { int ret = fdt_pack(ms->fdt); hwaddr dram_end, temp; @@ -XXX,XX +XXX,XX @@ uint64_t riscv_compute_fdt_addr(hwaddr dram_base, hwaddr dram_size, /* * We should put fdt as far as possible to avoid kernel/initrd overwriting - * its content. But it should be addressable by 32 bit system as well. - * Thus, put it at an 2MB aligned address that less than fdt size from the - * end of dram or 3GB whichever is lesser. + * its content. But it should be addressable by 32 bit system as well in RV32. + * Thus, put it near to the end of dram in RV64, and put it near to the end + * of dram or 3GB whichever is lesser in RV32. */ - temp = (dram_base < 3072 * MiB) ? MIN(dram_end, 3072 * MiB) : dram_end; + if (!riscv_is_32bit(harts)) { + temp = dram_end; + } else { + temp = (dram_base < 3072 * MiB) ? MIN(dram_end, 3072 * MiB) : dram_end; + } return QEMU_ALIGN_DOWN(temp - fdtsize, 2 * MiB); } diff --git a/hw/riscv/microchip_pfsoc.c b/hw/riscv/microchip_pfsoc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/microchip_pfsoc.c +++ b/hw/riscv/microchip_pfsoc.c @@ -XXX,XX +XXX,XX @@ static void microchip_icicle_kit_machine_init(MachineState *machine) bool kernel_as_payload = false; target_ulong firmware_end_addr, kernel_start_addr; uint64_t kernel_entry; - uint32_t fdt_load_addr; + uint64_t fdt_load_addr; DriveInfo *dinfo = drive_get(IF_SD, 0, 0); /* Sanity check on RAM size */ @@ -XXX,XX +XXX,XX @@ static void microchip_icicle_kit_machine_init(MachineState *machine) /* Compute the fdt load address in dram */ fdt_load_addr = riscv_compute_fdt_addr(memmap[MICROCHIP_PFSOC_DRAM_LO].base, memmap[MICROCHIP_PFSOC_DRAM_LO].size, - machine); + machine, &s->soc.u_cpus); riscv_load_fdt(fdt_load_addr, machine->fdt); /* Load the reset vector */ diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/sifive_u.c +++ b/hw/riscv/sifive_u.c @@ -XXX,XX +XXX,XX @@ static void sifive_u_machine_init(MachineState *machine) target_ulong firmware_end_addr, kernel_start_addr; const char *firmware_name; uint32_t start_addr_hi32 = 0x00000000; + uint32_t fdt_load_addr_hi32 = 0x00000000; int i; - uint32_t fdt_load_addr; + uint64_t fdt_load_addr; uint64_t kernel_entry; DriveInfo *dinfo; BlockBackend *blk; @@ -XXX,XX +XXX,XX @@ static void sifive_u_machine_init(MachineState *machine) fdt_load_addr = riscv_compute_fdt_addr(memmap[SIFIVE_U_DEV_DRAM].base, memmap[SIFIVE_U_DEV_DRAM].size, - machine); + machine, &s->soc.u_cpus); riscv_load_fdt(fdt_load_addr, machine->fdt); if (!riscv_is_32bit(&s->soc.u_cpus)) { start_addr_hi32 = (uint64_t)start_addr >> 32; + fdt_load_addr_hi32 = fdt_load_addr >> 32; } /* reset vector */ @@ -XXX,XX +XXX,XX @@ static void sifive_u_machine_init(MachineState *machine) start_addr, /* start: .dword */ start_addr_hi32, fdt_load_addr, /* fdt_laddr: .dword */ - 0x00000000, + fdt_load_addr_hi32, 0x00000000, /* fw_dyn: */ }; diff --git a/hw/riscv/spike.c b/hw/riscv/spike.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/spike.c +++ b/hw/riscv/spike.c @@ -XXX,XX +XXX,XX @@ static void spike_board_init(MachineState *machine) hwaddr firmware_load_addr = memmap[SPIKE_DRAM].base; target_ulong kernel_start_addr; char *firmware_name; - uint32_t fdt_load_addr; + uint64_t fdt_load_addr; uint64_t kernel_entry; char *soc_name; int i, base_hartid, hart_count; @@ -XXX,XX +XXX,XX @@ static void spike_board_init(MachineState *machine) fdt_load_addr = riscv_compute_fdt_addr(memmap[SPIKE_DRAM].base, memmap[SPIKE_DRAM].size, - machine); + machine, &s->soc[0]); riscv_load_fdt(fdt_load_addr, machine->fdt); /* load the reset vector */ diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_machine_done(Notifier *notifier, void *data) fdt_load_addr = riscv_compute_fdt_addr(memmap[VIRT_DRAM].base, memmap[VIRT_DRAM].size, - machine); + machine, &s->soc[0]); riscv_load_fdt(fdt_load_addr, machine->fdt); /* load the reset vector */ -- 2.47.1 From: Jim Shu <jim.shu@sifive.com> Add a new struct RISCVBootInfo to sync boot information between multiple boot functions. Signed-off-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20241120153935.24706-3-jim.shu@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/riscv/boot.h | 25 ++++++++++----- hw/riscv/boot.c | 65 ++++++++++++++++++++++---------------- hw/riscv/microchip_pfsoc.c | 11 ++++--- hw/riscv/opentitan.c | 4 ++- hw/riscv/sifive_e.c | 4 ++- hw/riscv/sifive_u.c | 12 ++++--- hw/riscv/spike.c | 12 ++++--- hw/riscv/virt.c | 13 +++++--- 8 files changed, 90 insertions(+), 56 deletions(-) diff --git a/include/hw/riscv/boot.h b/include/hw/riscv/boot.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/riscv/boot.h +++ b/include/hw/riscv/boot.h @@ -XXX,XX +XXX,XX @@ #define RISCV32_BIOS_BIN "opensbi-riscv32-generic-fw_dynamic.bin" #define RISCV64_BIOS_BIN "opensbi-riscv64-generic-fw_dynamic.bin" +typedef struct RISCVBootInfo { + ssize_t kernel_size; + hwaddr image_low_addr; + hwaddr image_high_addr; + + bool is_32bit; +} RISCVBootInfo; + bool riscv_is_32bit(RISCVHartArrayState *harts); char *riscv_plic_hart_config_string(int hart_count); -target_ulong riscv_calc_kernel_start_addr(RISCVHartArrayState *harts, +void riscv_boot_info_init(RISCVBootInfo *info, RISCVHartArrayState *harts); +target_ulong riscv_calc_kernel_start_addr(RISCVBootInfo *info, target_ulong firmware_end_addr); target_ulong riscv_find_and_load_firmware(MachineState *machine, const char *default_machine_firmware, @@ -XXX,XX +XXX,XX @@ char *riscv_find_firmware(const char *firmware_filename, target_ulong riscv_load_firmware(const char *firmware_filename, hwaddr *firmware_load_addr, symbol_fn_t sym_cb); -target_ulong riscv_load_kernel(MachineState *machine, - RISCVHartArrayState *harts, - target_ulong firmware_end_addr, - bool load_initrd, - symbol_fn_t sym_cb); -uint64_t riscv_compute_fdt_addr(hwaddr dram_start, uint64_t dram_size, - MachineState *ms, RISCVHartArrayState *harts); +void riscv_load_kernel(MachineState *machine, + RISCVBootInfo *info, + target_ulong kernel_start_addr, + bool load_initrd, + symbol_fn_t sym_cb); +uint64_t riscv_compute_fdt_addr(hwaddr dram_base, hwaddr dram_size, + MachineState *ms, RISCVBootInfo *info); void riscv_load_fdt(hwaddr fdt_addr, void *fdt); void riscv_setup_rom_reset_vec(MachineState *machine, RISCVHartArrayState *harts, hwaddr saddr, diff --git a/hw/riscv/boot.c b/hw/riscv/boot.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/boot.c +++ b/hw/riscv/boot.c @@ -XXX,XX +XXX,XX @@ char *riscv_plic_hart_config_string(int hart_count) return g_strjoinv(",", (char **)vals); } -target_ulong riscv_calc_kernel_start_addr(RISCVHartArrayState *harts, +void riscv_boot_info_init(RISCVBootInfo *info, RISCVHartArrayState *harts) +{ + info->kernel_size = 0; + info->is_32bit = riscv_is_32bit(harts); +} + +target_ulong riscv_calc_kernel_start_addr(RISCVBootInfo *info, target_ulong firmware_end_addr) { - if (riscv_is_32bit(harts)) { + if (info->is_32bit) { return QEMU_ALIGN_UP(firmware_end_addr, 4 * MiB); } else { return QEMU_ALIGN_UP(firmware_end_addr, 2 * MiB); @@ -XXX,XX +XXX,XX @@ target_ulong riscv_load_firmware(const char *firmware_filename, exit(1); } -static void riscv_load_initrd(MachineState *machine, uint64_t kernel_entry) +static void riscv_load_initrd(MachineState *machine, RISCVBootInfo *info) { const char *filename = machine->initrd_filename; uint64_t mem_size = machine->ram_size; @@ -XXX,XX +XXX,XX @@ static void riscv_load_initrd(MachineState *machine, uint64_t kernel_entry) * halfway into RAM, and for boards with 1GB of RAM or more we put * the initrd at 512MB. */ - start = kernel_entry + MIN(mem_size / 2, 512 * MiB); + start = info->image_low_addr + MIN(mem_size / 2, 512 * MiB); size = load_ramdisk(filename, start, mem_size - start); if (size == -1) { @@ -XXX,XX +XXX,XX @@ static void riscv_load_initrd(MachineState *machine, uint64_t kernel_entry) } } -target_ulong riscv_load_kernel(MachineState *machine, - RISCVHartArrayState *harts, - target_ulong kernel_start_addr, - bool load_initrd, - symbol_fn_t sym_cb) +void riscv_load_kernel(MachineState *machine, + RISCVBootInfo *info, + target_ulong kernel_start_addr, + bool load_initrd, + symbol_fn_t sym_cb) { const char *kernel_filename = machine->kernel_filename; - uint64_t kernel_load_base, kernel_entry; + ssize_t kernel_size; void *fdt = machine->fdt; g_assert(kernel_filename != NULL); @@ -XXX,XX +XXX,XX @@ target_ulong riscv_load_kernel(MachineState *machine, * the (expected) load address load address. This allows kernels to have * separate SBI and ELF entry points (used by FreeBSD, for example). */ - if (load_elf_ram_sym(kernel_filename, NULL, NULL, NULL, - NULL, &kernel_load_base, NULL, NULL, 0, - EM_RISCV, 1, 0, NULL, true, sym_cb) > 0) { - kernel_entry = kernel_load_base; + kernel_size = load_elf_ram_sym(kernel_filename, NULL, NULL, NULL, NULL, + &info->image_low_addr, &info->image_high_addr, + NULL, 0, EM_RISCV, 1, 0, NULL, true, sym_cb); + if (kernel_size > 0) { + info->kernel_size = kernel_size; goto out; } - if (load_uimage_as(kernel_filename, &kernel_entry, NULL, NULL, - NULL, NULL, NULL) > 0) { + kernel_size = load_uimage_as(kernel_filename, &info->image_low_addr, + NULL, NULL, NULL, NULL, NULL); + if (kernel_size > 0) { + info->kernel_size = kernel_size; + info->image_high_addr = info->image_low_addr + kernel_size; goto out; } - if (load_image_targphys_as(kernel_filename, kernel_start_addr, - current_machine->ram_size, NULL) > 0) { - kernel_entry = kernel_start_addr; + kernel_size = load_image_targphys_as(kernel_filename, kernel_start_addr, + current_machine->ram_size, NULL); + if (kernel_size > 0) { + info->kernel_size = kernel_size; + info->image_low_addr = kernel_start_addr; + info->image_high_addr = info->image_low_addr + kernel_size; goto out; } @@ -XXX,XX +XXX,XX @@ target_ulong riscv_load_kernel(MachineState *machine, out: /* - * For 32 bit CPUs 'kernel_entry' can be sign-extended by + * For 32 bit CPUs 'image_low_addr' can be sign-extended by * load_elf_ram_sym(). */ - if (riscv_is_32bit(harts)) { - kernel_entry = extract64(kernel_entry, 0, 32); + if (info->is_32bit) { + info->image_low_addr = extract64(info->image_low_addr, 0, 32); } if (load_initrd && machine->initrd_filename) { - riscv_load_initrd(machine, kernel_entry); + riscv_load_initrd(machine, info); } if (fdt && machine->kernel_cmdline && *machine->kernel_cmdline) { qemu_fdt_setprop_string(fdt, "/chosen", "bootargs", machine->kernel_cmdline); } - - return kernel_entry; } /* @@ -XXX,XX +XXX,XX @@ out: * The FDT is fdt_packed() during the calculation. */ uint64_t riscv_compute_fdt_addr(hwaddr dram_base, hwaddr dram_size, - MachineState *ms, RISCVHartArrayState *harts) + MachineState *ms, RISCVBootInfo *info) { int ret = fdt_pack(ms->fdt); hwaddr dram_end, temp; @@ -XXX,XX +XXX,XX @@ uint64_t riscv_compute_fdt_addr(hwaddr dram_base, hwaddr dram_size, * Thus, put it near to the end of dram in RV64, and put it near to the end * of dram or 3GB whichever is lesser in RV32. */ - if (!riscv_is_32bit(harts)) { + if (!info->is_32bit) { temp = dram_end; } else { temp = (dram_base < 3072 * MiB) ? MIN(dram_end, 3072 * MiB) : dram_end; diff --git a/hw/riscv/microchip_pfsoc.c b/hw/riscv/microchip_pfsoc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/microchip_pfsoc.c +++ b/hw/riscv/microchip_pfsoc.c @@ -XXX,XX +XXX,XX @@ static void microchip_icicle_kit_machine_init(MachineState *machine) uint64_t kernel_entry; uint64_t fdt_load_addr; DriveInfo *dinfo = drive_get(IF_SD, 0, 0); + RISCVBootInfo boot_info; /* Sanity check on RAM size */ if (machine->ram_size < mc->default_ram_size) { @@ -XXX,XX +XXX,XX @@ static void microchip_icicle_kit_machine_init(MachineState *machine) firmware_end_addr = riscv_find_and_load_firmware(machine, firmware_name, &firmware_load_addr, NULL); + riscv_boot_info_init(&boot_info, &s->soc.u_cpus); if (kernel_as_payload) { - kernel_start_addr = riscv_calc_kernel_start_addr(&s->soc.u_cpus, + kernel_start_addr = riscv_calc_kernel_start_addr(&boot_info, firmware_end_addr); - kernel_entry = riscv_load_kernel(machine, &s->soc.u_cpus, - kernel_start_addr, true, NULL); + riscv_load_kernel(machine, &boot_info, kernel_start_addr, + true, NULL); + kernel_entry = boot_info.image_low_addr; /* Compute the fdt load address in dram */ fdt_load_addr = riscv_compute_fdt_addr(memmap[MICROCHIP_PFSOC_DRAM_LO].base, memmap[MICROCHIP_PFSOC_DRAM_LO].size, - machine, &s->soc.u_cpus); + machine, &boot_info); riscv_load_fdt(fdt_load_addr, machine->fdt); /* Load the reset vector */ diff --git a/hw/riscv/opentitan.c b/hw/riscv/opentitan.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/opentitan.c +++ b/hw/riscv/opentitan.c @@ -XXX,XX +XXX,XX @@ static void opentitan_machine_init(MachineState *machine) OpenTitanState *s = OPENTITAN_MACHINE(machine); const MemMapEntry *memmap = ibex_memmap; MemoryRegion *sys_mem = get_system_memory(); + RISCVBootInfo boot_info; if (machine->ram_size != mc->default_ram_size) { char *sz = size_to_str(mc->default_ram_size); @@ -XXX,XX +XXX,XX @@ static void opentitan_machine_init(MachineState *machine) riscv_load_firmware(machine->firmware, &firmware_load_addr, NULL); } + riscv_boot_info_init(&boot_info, &s->soc.cpus); if (machine->kernel_filename) { - riscv_load_kernel(machine, &s->soc.cpus, + riscv_load_kernel(machine, &boot_info, memmap[IBEX_DEV_RAM].base, false, NULL); } diff --git a/hw/riscv/sifive_e.c b/hw/riscv/sifive_e.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/sifive_e.c +++ b/hw/riscv/sifive_e.c @@ -XXX,XX +XXX,XX @@ static void sifive_e_machine_init(MachineState *machine) SiFiveEState *s = RISCV_E_MACHINE(machine); MemoryRegion *sys_mem = get_system_memory(); int i; + RISCVBootInfo boot_info; if (machine->ram_size != mc->default_ram_size) { char *sz = size_to_str(mc->default_ram_size); @@ -XXX,XX +XXX,XX @@ static void sifive_e_machine_init(MachineState *machine) rom_add_blob_fixed_as("mrom.reset", reset_vec, sizeof(reset_vec), memmap[SIFIVE_E_DEV_MROM].base, &address_space_memory); + riscv_boot_info_init(&boot_info, &s->soc.cpus); if (machine->kernel_filename) { - riscv_load_kernel(machine, &s->soc.cpus, + riscv_load_kernel(machine, &boot_info, memmap[SIFIVE_E_DEV_DTIM].base, false, NULL); } diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/sifive_u.c +++ b/hw/riscv/sifive_u.c @@ -XXX,XX +XXX,XX @@ static void sifive_u_machine_init(MachineState *machine) BlockBackend *blk; DeviceState *flash_dev, *sd_dev, *card_dev; qemu_irq flash_cs, sd_cs; + RISCVBootInfo boot_info; /* Initialize SoC */ object_initialize_child(OBJECT(machine), "soc", &s->soc, TYPE_RISCV_U_SOC); @@ -XXX,XX +XXX,XX @@ static void sifive_u_machine_init(MachineState *machine) firmware_end_addr = riscv_find_and_load_firmware(machine, firmware_name, &start_addr, NULL); + riscv_boot_info_init(&boot_info, &s->soc.u_cpus); if (machine->kernel_filename) { - kernel_start_addr = riscv_calc_kernel_start_addr(&s->soc.u_cpus, + kernel_start_addr = riscv_calc_kernel_start_addr(&boot_info, firmware_end_addr); - - kernel_entry = riscv_load_kernel(machine, &s->soc.u_cpus, - kernel_start_addr, true, NULL); + riscv_load_kernel(machine, &boot_info, kernel_start_addr, + true, NULL); + kernel_entry = boot_info.image_low_addr; } else { /* * If dynamic firmware is used, it doesn't know where is the next mode @@ -XXX,XX +XXX,XX @@ static void sifive_u_machine_init(MachineState *machine) fdt_load_addr = riscv_compute_fdt_addr(memmap[SIFIVE_U_DEV_DRAM].base, memmap[SIFIVE_U_DEV_DRAM].size, - machine, &s->soc.u_cpus); + machine, &boot_info); riscv_load_fdt(fdt_load_addr, machine->fdt); if (!riscv_is_32bit(&s->soc.u_cpus)) { diff --git a/hw/riscv/spike.c b/hw/riscv/spike.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/spike.c +++ b/hw/riscv/spike.c @@ -XXX,XX +XXX,XX @@ static void spike_board_init(MachineState *machine) char *soc_name; int i, base_hartid, hart_count; bool htif_custom_base = false; + RISCVBootInfo boot_info; /* Check socket count limit */ if (SPIKE_SOCKETS_MAX < riscv_socket_count(machine)) { @@ -XXX,XX +XXX,XX @@ static void spike_board_init(MachineState *machine) create_fdt(s, memmap, riscv_is_32bit(&s->soc[0]), htif_custom_base); /* Load kernel */ + riscv_boot_info_init(&boot_info, &s->soc[0]); if (machine->kernel_filename) { - kernel_start_addr = riscv_calc_kernel_start_addr(&s->soc[0], + kernel_start_addr = riscv_calc_kernel_start_addr(&boot_info, firmware_end_addr); - kernel_entry = riscv_load_kernel(machine, &s->soc[0], - kernel_start_addr, - true, htif_symbol_callback); + riscv_load_kernel(machine, &boot_info, kernel_start_addr, + true, htif_symbol_callback); + kernel_entry = boot_info.image_low_addr; } else { /* * If dynamic firmware is used, it doesn't know where is the next mode @@ -XXX,XX +XXX,XX @@ static void spike_board_init(MachineState *machine) fdt_load_addr = riscv_compute_fdt_addr(memmap[SPIKE_DRAM].base, memmap[SPIKE_DRAM].size, - machine, &s->soc[0]); + machine, &boot_info); riscv_load_fdt(fdt_load_addr, machine->fdt); /* load the reset vector */ diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_machine_done(Notifier *notifier, void *data) uint64_t fdt_load_addr; uint64_t kernel_entry = 0; BlockBackend *pflash_blk0; + RISCVBootInfo boot_info; /* * An user provided dtb must include everything, including @@ -XXX,XX +XXX,XX @@ static void virt_machine_done(Notifier *notifier, void *data) } } + riscv_boot_info_init(&boot_info, &s->soc[0]); + if (machine->kernel_filename && !kernel_entry) { - kernel_start_addr = riscv_calc_kernel_start_addr(&s->soc[0], + kernel_start_addr = riscv_calc_kernel_start_addr(&boot_info, firmware_end_addr); - - kernel_entry = riscv_load_kernel(machine, &s->soc[0], - kernel_start_addr, true, NULL); + riscv_load_kernel(machine, &boot_info, kernel_start_addr, + true, NULL); + kernel_entry = boot_info.image_low_addr; } fdt_load_addr = riscv_compute_fdt_addr(memmap[VIRT_DRAM].base, memmap[VIRT_DRAM].size, - machine, &s->soc[0]); + machine, &boot_info); riscv_load_fdt(fdt_load_addr, machine->fdt); /* load the reset vector */ -- 2.47.1 From: Jim Shu <jim.shu@sifive.com> DTB is placed to the end of memory, so we will check if the start address of DTB overlaps to the address of kernel/initrd. Signed-off-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20241120153935.24706-4-jim.shu@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/riscv/boot.h | 3 +++ hw/riscv/boot.c | 25 ++++++++++++++++++++++++- 2 files changed, 27 insertions(+), 1 deletion(-) diff --git a/include/hw/riscv/boot.h b/include/hw/riscv/boot.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/riscv/boot.h +++ b/include/hw/riscv/boot.h @@ -XXX,XX +XXX,XX @@ typedef struct RISCVBootInfo { hwaddr image_low_addr; hwaddr image_high_addr; + hwaddr initrd_start; + ssize_t initrd_size; + bool is_32bit; } RISCVBootInfo; diff --git a/hw/riscv/boot.c b/hw/riscv/boot.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/boot.c +++ b/hw/riscv/boot.c @@ -XXX,XX +XXX,XX @@ char *riscv_plic_hart_config_string(int hart_count) void riscv_boot_info_init(RISCVBootInfo *info, RISCVHartArrayState *harts) { info->kernel_size = 0; + info->initrd_size = 0; info->is_32bit = riscv_is_32bit(harts); } @@ -XXX,XX +XXX,XX @@ static void riscv_load_initrd(MachineState *machine, RISCVBootInfo *info) } } + info->initrd_start = start; + info->initrd_size = size; + /* Some RISC-V machines (e.g. opentitan) don't have a fdt. */ if (fdt) { end = start + size; @@ -XXX,XX +XXX,XX @@ uint64_t riscv_compute_fdt_addr(hwaddr dram_base, hwaddr dram_size, int ret = fdt_pack(ms->fdt); hwaddr dram_end, temp; int fdtsize; + uint64_t dtb_start, dtb_start_limit; /* Should only fail if we've built a corrupted tree */ g_assert(ret == 0); @@ -XXX,XX +XXX,XX @@ uint64_t riscv_compute_fdt_addr(hwaddr dram_base, hwaddr dram_size, exit(1); } + if (info->initrd_size) { + /* If initrd is successfully loaded, place DTB after it. */ + dtb_start_limit = info->initrd_start + info->initrd_size; + } else if (info->kernel_size) { + /* If only kernel is successfully loaded, place DTB after it. */ + dtb_start_limit = info->image_high_addr; + } else { + /* Otherwise, do not check DTB overlapping */ + dtb_start_limit = 0; + } + /* * A dram_size == 0, usually from a MemMapEntry[].size element, * means that the DRAM block goes all the way to ms->ram_size. @@ -XXX,XX +XXX,XX @@ uint64_t riscv_compute_fdt_addr(hwaddr dram_base, hwaddr dram_size, temp = (dram_base < 3072 * MiB) ? MIN(dram_end, 3072 * MiB) : dram_end; } - return QEMU_ALIGN_DOWN(temp - fdtsize, 2 * MiB); + dtb_start = QEMU_ALIGN_DOWN(temp - fdtsize, 2 * MiB); + + if (dtb_start_limit && (dtb_start < dtb_start_limit)) { + error_report("No enough memory to place DTB after kernel/initrd"); + exit(1); + } + + return dtb_start; } /* -- 2.47.1 From: "Fea.Wang" <fea.wang@sifive.com> Refer to the draft of svukte extension from: https://github.com/riscv/riscv-isa-manual/pull/1564 Svukte provides a means to make user-mode accesses to supervisor memory raise page faults in constant time, mitigating attacks that attempt to discover the supervisor software's address-space layout. Signed-off-by: Fea.Wang <fea.wang@sifive.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20241203034932.25185-2-fea.wang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu_cfg.h | 1 + 1 file changed, 1 insertion(+) diff --git a/target/riscv/cpu_cfg.h b/target/riscv/cpu_cfg.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_cfg.h +++ b/target/riscv/cpu_cfg.h @@ -XXX,XX +XXX,XX @@ struct RISCVCPUConfig { bool ext_svnapot; bool ext_svpbmt; bool ext_svvptc; + bool ext_svukte; bool ext_zdinx; bool ext_zaamo; bool ext_zacas; -- 2.47.1 From: "Fea.Wang" <fea.wang@sifive.com> Svukte extension add UKTE bit, bit[8] in senvcfg CSR. The bit will be supported when the svukte extension is enabled. When senvcfg[UKTE] bit is set, the memory access from U-mode should do the svukte check only except HLV/HLVX/HSV H-mode instructions which depend on hstatus[HUKTE]. Signed-off-by: Fea.Wang <fea.wang@sifive.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20241203034932.25185-3-fea.wang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu_bits.h | 1 + target/riscv/csr.c | 4 ++++ 2 files changed, 5 insertions(+) diff --git a/target/riscv/cpu_bits.h b/target/riscv/cpu_bits.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_bits.h +++ b/target/riscv/cpu_bits.h @@ -XXX,XX +XXX,XX @@ typedef enum RISCVException { #define SENVCFG_CBIE MENVCFG_CBIE #define SENVCFG_CBCFE MENVCFG_CBCFE #define SENVCFG_CBZE MENVCFG_CBZE +#define SENVCFG_UKTE BIT(8) #define HENVCFG_FIOM MENVCFG_FIOM #define HENVCFG_LPE MENVCFG_LPE diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException write_senvcfg(CPURISCVState *env, int csrno, mask |= SENVCFG_SSE; } + if (env_archcpu(env)->cfg.ext_svukte) { + mask |= SENVCFG_UKTE; + } + env->senvcfg = (env->senvcfg & ~mask) | (val & mask); return RISCV_EXCP_NONE; } -- 2.47.1 From: "Fea.Wang" <fea.wang@sifive.com> Svukte extension add HUKTE bit, bit[24] in hstatus CSR. The written value will be masked when the svukte extension is not enabled. When hstatus[HUKTE] bit is set, HLV/HLVX/HSV work in the U-mode should do svukte check. Signed-off-by: Fea.Wang <fea.wang@sifive.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20241203034932.25185-4-fea.wang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu_bits.h | 1 + target/riscv/csr.c | 3 +++ 2 files changed, 4 insertions(+) diff --git a/target/riscv/cpu_bits.h b/target/riscv/cpu_bits.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_bits.h +++ b/target/riscv/cpu_bits.h @@ -XXX,XX +XXX,XX @@ typedef enum { #define HSTATUS_VTVM 0x00100000 #define HSTATUS_VTW 0x00200000 #define HSTATUS_VTSR 0x00400000 +#define HSTATUS_HUKTE 0x01000000 #define HSTATUS_VSXL 0x300000000 #define HSTATUS32_WPRI 0xFF8FF87E diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException read_hstatus(CPURISCVState *env, int csrno, static RISCVException write_hstatus(CPURISCVState *env, int csrno, target_ulong val) { + if (!env_archcpu(env)->cfg.ext_svukte) { + val = val & (~HSTATUS_HUKTE); + } env->hstatus = val; if (riscv_cpu_mxl(env) != MXL_RV32 && get_field(val, HSTATUS_VSXL) != 2) { qemu_log_mask(LOG_UNIMP, -- 2.47.1 From: "Fea.Wang" <fea.wang@sifive.com> Follow the Svukte spec, do the memory access address checking 1. Include instruction fetches or explicit memory accesses 2. System run in effective privilege U or VU 3. Check senvcfg[UKTE] being set, or hstatus[HUKTE] being set if instruction is HLV, HLVX, HSV and execute from U mode to VU mode 4. Depend on Sv39 and check virtual addresses bit[SXLEN-1] 5. Raises a page-fault exception corresponding to the original access type. Ref: https://github.com/riscv/riscv-isa-manual/pull/1564/files Signed-off-by: Frank Chang <frank.chang@sifive.com> Signed-off-by: Fea.Wang <fea.wang@sifive.com> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20241203034932.25185-5-fea.wang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu_helper.c | 55 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 55 insertions(+) diff --git a/target/riscv/cpu_helper.c b/target/riscv/cpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_helper.c +++ b/target/riscv/cpu_helper.c @@ -XXX,XX +XXX,XX @@ static int get_physical_address_pmp(CPURISCVState *env, int *prot, hwaddr addr, return TRANSLATE_SUCCESS; } +/* Returns 'true' if a svukte address check is needed */ +static bool do_svukte_check(CPURISCVState *env, bool first_stage, + int mode, bool virt) +{ + /* Svukte extension depends on Sv39. */ + if (!(env_archcpu(env)->cfg.ext_svukte || + !first_stage || + VM_1_10_SV39 != get_field(env->satp, SATP64_MODE))) { + return false; + } + + /* + * Check hstatus.HUKTE if the effective mode is switched to VU-mode by + * executing HLV/HLVX/HSV in U-mode. + * For other cases, check senvcfg.UKTE. + */ + if (env->priv == PRV_U && !env->virt_enabled && virt) { + if (!get_field(env->hstatus, HSTATUS_HUKTE)) { + return false; + } + } else if (!get_field(env->senvcfg, SENVCFG_UKTE)) { + return false; + } + + /* + * Svukte extension is qualified only in U or VU-mode. + * + * Effective mode can be switched to U or VU-mode by: + * - M-mode + mstatus.MPRV=1 + mstatus.MPP=U-mode. + * - Execute HLV/HLVX/HSV from HS-mode + hstatus.SPVP=0. + * - U-mode. + * - VU-mode. + * - Execute HLV/HLVX/HSV from U-mode + hstatus.HU=1. + */ + if (mode != PRV_U) { + return false; + } + + return true; +} + +static bool check_svukte_addr(CPURISCVState *env, vaddr addr) +{ + /* svukte extension excludes RV32 */ + uint32_t sxlen = 32 * riscv_cpu_sxl(env); + uint64_t high_bit = addr & (1UL << (sxlen - 1)); + return !high_bit; +} + /* * get_physical_address - get the physical address for this virtual address * @@ -XXX,XX +XXX,XX @@ static int get_physical_address(CPURISCVState *env, hwaddr *physical, MemTxResult res; MemTxAttrs attrs = MEMTXATTRS_UNSPECIFIED; int mode = mmuidx_priv(mmu_idx); + bool virt = mmuidx_2stage(mmu_idx); bool use_background = false; hwaddr ppn; int napot_bits = 0; @@ -XXX,XX +XXX,XX @@ static int get_physical_address(CPURISCVState *env, hwaddr *physical, bool is_sstack_idx = ((mmu_idx & MMU_IDX_SS_WRITE) == MMU_IDX_SS_WRITE); bool sstack_page = false; + if (do_svukte_check(env, first_stage, mode, virt) && + !check_svukte_addr(env, addr)) { + return TRANSLATE_FAIL; + } + /* * Check if we should use the background registers for the two * stage translation. We don't need to check if we actually need -- 2.47.1 From: "Fea.Wang" <fea.wang@sifive.com> Add "svukte" in the ISA string when svukte extension is enabled. Signed-off-by: Fea.Wang <fea.wang@sifive.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20241203034932.25185-6-fea.wang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(svinval, PRIV_VERSION_1_12_0, ext_svinval), ISA_EXT_DATA_ENTRY(svnapot, PRIV_VERSION_1_12_0, ext_svnapot), ISA_EXT_DATA_ENTRY(svpbmt, PRIV_VERSION_1_12_0, ext_svpbmt), + ISA_EXT_DATA_ENTRY(svukte, PRIV_VERSION_1_13_0, ext_svukte), ISA_EXT_DATA_ENTRY(svvptc, PRIV_VERSION_1_13_0, ext_svvptc), ISA_EXT_DATA_ENTRY(xtheadba, PRIV_VERSION_1_11_0, ext_xtheadba), ISA_EXT_DATA_ENTRY(xtheadbb, PRIV_VERSION_1_11_0, ext_xtheadbb), @@ -XXX,XX +XXX,XX @@ const RISCVCPUMultiExtConfig riscv_cpu_vendor_exts[] = { /* These are experimental so mark with 'x-' */ const RISCVCPUMultiExtConfig riscv_cpu_experimental_exts[] = { + MULTI_EXT_CFG_BOOL("x-svukte", ext_svukte, false), DEFINE_PROP_END_OF_LIST(), }; -- 2.47.1 From: "Fea.Wang" <fea.wang@sifive.com> The spec explicitly says svukte doesn't support RV32. So check that it is not enabled in RV32. Signed-off-by: Fea.Wang <fea.wang@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20241203034932.25185-7-fea.wang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ void riscv_cpu_validate_set_extensions(RISCVCPU *cpu, Error **errp) return; } + if (mcc->misa_mxl_max == MXL_RV32 && cpu->cfg.ext_svukte) { + error_setg(errp, "svukte is not supported for RV32"); + return; + } + /* * Disable isa extensions based on priv spec after we * validated and set everything we need. -- 2.47.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Rather than relying on implicit includes, explicit them, in order to avoid when refactoring unrelated headers: target/riscv/vector_internals.h:36:12: error: call to undeclared function 'FIELD_EX32'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration] 36 | return FIELD_EX32(simd_data(desc), VDATA, NF); | ^ Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20241203200828.47311-2-philmd@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/vector_internals.h | 1 + 1 file changed, 1 insertion(+) diff --git a/target/riscv/vector_internals.h b/target/riscv/vector_internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/vector_internals.h +++ b/target/riscv/vector_internals.h @@ -XXX,XX +XXX,XX @@ #define TARGET_RISCV_VECTOR_INTERNALS_H #include "qemu/bitops.h" +#include "hw/registerfields.h" #include "cpu.h" #include "tcg/tcg-gvec-desc.h" #include "internals.h" -- 2.47.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Rather than relying on implicit includes, explicit them, in order to avoid when refactoring unrelated headers: target/riscv/internals.h:49:15: error: use of undeclared identifier 'PRV_S' 49 | ret = PRV_S; | ^ target/riscv/internals.h:93:9: error: call to undeclared function 'env_archcpu'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration] 93 | if (env_archcpu(env)->cfg.ext_zfinx) { | ^ target/riscv/internals.h:101:15: error: unknown type name 'float32'; did you mean 'float'? 101 | static inline float32 check_nanbox_s(CPURISCVState *env, uint64_t f) | ^~~~~~~ | float Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20241203200828.47311-3-philmd@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/internals.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/target/riscv/internals.h b/target/riscv/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/internals.h +++ b/target/riscv/internals.h @@ -XXX,XX +XXX,XX @@ #ifndef RISCV_CPU_INTERNALS_H #define RISCV_CPU_INTERNALS_H +#include "exec/cpu-common.h" #include "hw/registerfields.h" +#include "fpu/softfloat-types.h" +#include "target/riscv/cpu_bits.h" /* * The current MMU Modes are: -- 2.47.1 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Commit 68c9e54bea handled a situation where a warning was being shown when using the 'sifive_e' cpu when disabling the named extension zic64b. It makes little sense to show user warnings for named extensions that users can't control, and the solution taken was to disable zic64b manually in riscv_cpu_update_named_features(). This solution won't scale well when adding more named features, and can eventually end up repeating riscv_cpu_disable_priv_spec_isa_exts(). Change riscv_cpu_disable_priv_spec_isa_exts() to not show warnings when disabling a named feature. This will accomplish the same thing we're doing today while avoiding having two points where we're disabling exts via priv_ver mismatch. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20241113171755.978109-2-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_disable_priv_spec_isa_exts(RISCVCPU *cpu) } isa_ext_update_enabled(cpu, edata->ext_enable_offset, false); + + /* + * Do not show user warnings for named features that users + * can't enable/disable in the command line. See commit + * 68c9e54bea for more info. + */ + if (cpu_cfg_offset_is_named_feat(edata->ext_enable_offset)) { + continue; + } #ifndef CONFIG_USER_ONLY warn_report("disabling %s extension for hart 0x" TARGET_FMT_lx " because privilege spec version does not match", @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_update_named_features(RISCVCPU *cpu) cpu->cfg.has_priv_1_13 = true; } - /* zic64b is 1.12 or later */ cpu->cfg.ext_zic64b = cpu->cfg.cbom_blocksize == 64 && cpu->cfg.cbop_blocksize == 64 && - cpu->cfg.cboz_blocksize == 64 && - cpu->cfg.has_priv_1_12; + cpu->cfg.cboz_blocksize == 64; } static void riscv_cpu_validate_g(RISCVCPU *cpu) -- 2.47.1 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> ssstateen is defined in RVA22 as: "Supervisor-mode view of the state-enable extension. The supervisor-mode (sstateen0-3) and hypervisor-mode (hstateen0-3) state-enable registers must be provided." Add ssstateen as a named feature that is available if we also have smstateen. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Message-ID: <20241113171755.978109-3-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu_cfg.h | 1 + target/riscv/cpu.c | 2 ++ target/riscv/tcg/tcg-cpu.c | 9 ++++++++- 3 files changed, 11 insertions(+), 1 deletion(-) diff --git a/target/riscv/cpu_cfg.h b/target/riscv/cpu_cfg.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_cfg.h +++ b/target/riscv/cpu_cfg.h @@ -XXX,XX +XXX,XX @@ struct RISCVCPUConfig { /* Named features */ bool ext_svade; bool ext_zic64b; + bool ext_ssstateen; /* * Always 'true' booleans for named features diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(ssccptr, PRIV_VERSION_1_11_0, has_priv_1_11), ISA_EXT_DATA_ENTRY(sscofpmf, PRIV_VERSION_1_12_0, ext_sscofpmf), ISA_EXT_DATA_ENTRY(sscounterenw, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_EXT_DATA_ENTRY(ssstateen, PRIV_VERSION_1_12_0, ext_ssstateen), ISA_EXT_DATA_ENTRY(sstc, PRIV_VERSION_1_12_0, ext_sstc), ISA_EXT_DATA_ENTRY(sstvala, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(sstvecd, PRIV_VERSION_1_12_0, has_priv_1_12), @@ -XXX,XX +XXX,XX @@ const RISCVCPUMultiExtConfig riscv_cpu_experimental_exts[] = { */ const RISCVCPUMultiExtConfig riscv_cpu_named_features[] = { MULTI_EXT_CFG_BOOL("zic64b", ext_zic64b, true), + MULTI_EXT_CFG_BOOL("ssstateen", ext_ssstateen, true), DEFINE_PROP_END_OF_LIST(), }; diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_enable_named_feat(RISCVCPU *cpu, uint32_t feat_offset) * All other named features are already enabled * in riscv_tcg_cpu_instance_init(). */ - if (feat_offset == CPU_CFG_OFFSET(ext_zic64b)) { + switch (feat_offset) { + case CPU_CFG_OFFSET(ext_zic64b): cpu->cfg.cbom_blocksize = 64; cpu->cfg.cbop_blocksize = 64; cpu->cfg.cboz_blocksize = 64; + break; + case CPU_CFG_OFFSET(ext_ssstateen): + cpu->cfg.ext_smstateen = true; + break; } } @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_update_named_features(RISCVCPU *cpu) cpu->cfg.ext_zic64b = cpu->cfg.cbom_blocksize == 64 && cpu->cfg.cbop_blocksize == 64 && cpu->cfg.cboz_blocksize == 64; + + cpu->cfg.ext_ssstateen = cpu->cfg.ext_smstateen; } static void riscv_cpu_validate_g(RISCVCPU *cpu) -- 2.47.1 From: MollyChen <xiaoou@iscas.ac.cn> Add a CPU entry for the RV64 XiangShan NANHU CPU which supports single-core and dual-core configurations. More details can be found at https://docs.xiangshan.cc/zh-cn/latest/integration/overview Signed-off-by: MollyChen <xiaoou@iscas.ac.cn> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20241205073622.46052-1-xiaoou@iscas.ac.cn> [ Changes by AF - Fixup code formatting ] Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu-qom.h | 1 + target/riscv/cpu.c | 30 ++++++++++++++++++++++++++++++ 2 files changed, 31 insertions(+) diff --git a/target/riscv/cpu-qom.h b/target/riscv/cpu-qom.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu-qom.h +++ b/target/riscv/cpu-qom.h @@ -XXX,XX +XXX,XX @@ #define TYPE_RISCV_CPU_THEAD_C906 RISCV_CPU_TYPE_NAME("thead-c906") #define TYPE_RISCV_CPU_VEYRON_V1 RISCV_CPU_TYPE_NAME("veyron-v1") #define TYPE_RISCV_CPU_TT_ASCALON RISCV_CPU_TYPE_NAME("tt-ascalon") +#define TYPE_RISCV_CPU_XIANGSHAN_NANHU RISCV_CPU_TYPE_NAME("xiangshan-nanhu") #define TYPE_RISCV_CPU_HOST RISCV_CPU_TYPE_NAME("host") OBJECT_DECLARE_CPU_TYPE(RISCVCPU, RISCVCPUClass, RISCV_CPU) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static void rv64_tt_ascalon_cpu_init(Object *obj) #endif } +static void rv64_xiangshan_nanhu_cpu_init(Object *obj) +{ + CPURISCVState *env = &RISCV_CPU(obj)->env; + RISCVCPU *cpu = RISCV_CPU(obj); + + riscv_cpu_set_misa_ext(env, RVG | RVC | RVB | RVS | RVU); + env->priv_ver = PRIV_VERSION_1_12_0; + + /* Enable ISA extensions */ + cpu->cfg.ext_zbc = true; + cpu->cfg.ext_zbkb = true; + cpu->cfg.ext_zbkc = true; + cpu->cfg.ext_zbkx = true; + cpu->cfg.ext_zknd = true; + cpu->cfg.ext_zkne = true; + cpu->cfg.ext_zknh = true; + cpu->cfg.ext_zksed = true; + cpu->cfg.ext_zksh = true; + cpu->cfg.ext_svinval = true; + + cpu->cfg.mmu = true; + cpu->cfg.pmp = true; + +#ifndef CONFIG_USER_ONLY + set_satp_mode_max_supported(cpu, VM_1_10_SV39); +#endif +} + #ifdef CONFIG_TCG static void rv128_base_cpu_init(Object *obj) { @@ -XXX,XX +XXX,XX @@ static const TypeInfo riscv_cpu_type_infos[] = { DEFINE_VENDOR_CPU(TYPE_RISCV_CPU_THEAD_C906, MXL_RV64, rv64_thead_c906_cpu_init), DEFINE_VENDOR_CPU(TYPE_RISCV_CPU_TT_ASCALON, MXL_RV64, rv64_tt_ascalon_cpu_init), DEFINE_VENDOR_CPU(TYPE_RISCV_CPU_VEYRON_V1, MXL_RV64, rv64_veyron_v1_cpu_init), + DEFINE_VENDOR_CPU(TYPE_RISCV_CPU_XIANGSHAN_NANHU, + MXL_RV64, rv64_xiangshan_nanhu_cpu_init), #ifdef CONFIG_TCG DEFINE_DYNAMIC_CPU(TYPE_RISCV_CPU_BASE128, MXL_RV128, rv128_base_cpu_init), #endif /* CONFIG_TCG */ -- 2.47.1 From: Alistair Francis <alistair.francis@wdc.com> The following changes since commit f5a2438405d4ae8b62de7c9b39fac0b2155ee544: Merge tag 'pull-qapi-2026-05-21' of https://repo.or.cz/qemu/armbru into staging (2026-05-21 09:00:22 -0400) are available in the Git repository at: https://github.com/alistair23/qemu.git tags/pull-riscv-to-apply-20260522 for you to fetch changes up to b7d87fb10d53a918e9c4a3dfe1fb06ce42c52526: hw/riscv: riscv-iommu: Re-process command queue after clearing CMD_ILL (2026-05-22 09:59:21 +1000) ---------------------------------------------------------------- RISC-V PR for 11.1. * Remove spike as default machine * Deprecate the shakti_c machine * Set MISA.[C|X] based on the selected extensions * Update Maintainers for OpenSBI Firmware * Update OpenSBI to v1.8.1 * Avoid RISCVCPU copy in PMU FDT setup * A collection of specification compliance improvements * Fix Svnapot 64KB pages * Handle source overlap of vector widening reduction instructions * Check interrupt in SiFive UART after txctrl register is written * Fix medeleg[11] read-only zero bit for M-mode ECALL * Fix tail handling for vmv.s.x and vfmv.s.f * Update the local AIA interrupt mask * Add KVM support for Zicbop and BFloat16 extensions * Fix the IOMMU FSC SV32 capability check * Avoid caching PCI device IDs in the IOMMU * Implement Microchip mpfs ioscb PLLs and sysreg clock dividers * Remove the internal CPU riscv_cpu_* arrays * Fix IOCOUNTINH.CY toggle detection * Fix the read of pmpaddr(0-63) CSRs * Make hpmcounterh return the upper 32-bits * Minor fixes and enhancements of RISC-V AIA devices * Re-process IOMMU command queue after clearing CMD_ILL ---------------------------------------------------------------- Abhigyan Kumar (1): target/riscv: Fix medeleg[11] read-only zero bit for M-mode ECALL Alistair Francis (4): target/riscv: Remove spike as default machine target/riscv: Deprecate the shakti_c machine MAINTAINERS: Maintain OpenSBI Firmware target/riscv: Update the local interrupt mask Andrew Jones (1): hw/riscv/riscv-iommu: Fix Svnapot 64KB pages Anton Blanchard (1): target/riscv: rvv: Handle source overlap of vector widening reduction instructions Chengbo Gao (1): hw/riscv/riscv-iommu: Avoid caching PCI device IDs Daniel Henrique Barboza (16): roms/opensbi: Update to v1.8.1 target/riscv/cpu.c: add xlrbr isa_edata_arr[] entry target/riscv/cpu.c: fix smctr/ssctr isa_edata_arr[] order target/riscv: make riscv-qmp-cmds use isa_data_arr[] target/riscv/tcg: treat all exts equally in cpu_disable_priv_spec_isa_exts target/riscv/tcg: use only isa_edata_arr[] in cpu_cfg_ext_get_name() target/riscv/cpu.c: remove riscv_cpu_enable_named_feat() target/riscv: remove riscv_cpu_named_features[] target/riscv/tcg: use isa_edata_arr[] in riscv_cpu_update_misa_x() target/riscv/kvm: use isa_edata_arr[] for unavailable props target/riscv/tcg: use isa_edata_arr[] to enable max exts target/riscv/tcg: use cfg_offset as cpu_set_multi_ext cb opaque target/riscv: do not set defaults in cpu prop callback target/riscv/tcg: use isa_edata_arr[] to create user props target/riscv/cpu: remove riscv_cpu_* arrays target/riscv/csr.c: fix read of pmpaddr(0-63) CSRs Fangyu Yu (1): hw/riscv/riscv-iommu: Fix IOCOUNTINH.CY toggle detection Frank Chang (3): target/riscv: Update MISA.C for Zc* extensions target/riscv: Update MISA.X for non-standard extensions hw/char: Check interrupt after txctrl register is written Guenter Roeck (1): hw: misc: Implement Microchip mpfs ioscb PLLs and sysreg clock dividers Jay Chang (1): hw/riscv: riscv-iommu: Re-process command queue after clearing CMD_ILL Jim Shu (4): hw/intc: riscv_aplic: Fix level trigger IRQ in direct delivery mode hw/intc: riscv_aplic: Add reset API to APLIC hw/intc: riscv_imsic: Add reset API to IMSIC hw/intc: riscv_aplic: add trace events of APLIC read/write function Mohamed Ayman (1): riscv: virt: avoid RISCVCPU copy in PMU FDT setup Portia Stephens (1): target/riscv: Make hpmcounterh return the upper 32-bits Zishun Yi (9): target/riscv: Allow mseccfg access based on ext_zicfilp target/riscv: add Zvknha as an implied extension for Zvknhb target/riscv: Remove unconditional MENVCFG_CDE from mask target/riscv: Fix missing CDE check for scountinhibit target/riscv/pmp: Fix integer overflow in TOR and NA4 address computation target/riscv: Add mseccfg to VMStateDescription target/riscv: clear mseccfg on reset for all dependent extensions hw/riscv/riscv-iommu: fix FSC SV32 capability check hw/riscv/virt-acpi-build: Fix off-by-one error in RIMT ID mapping Zongmin Zhou (2): target/riscv/kvm: add KVM support for Zicbop extension target/riscv/kvm: Add BFloat16 extensions support chen.zhongyao@zte.com.cn (1): target/riscv: Fix tail handling for vmv.s.x and vfmv.s.f MAINTAINERS | 2 + docs/about/deprecated.rst | 21 +- docs/about/removed-features.rst | 14 ++ include/hw/misc/mchp_pfsoc_ioscb.h | 2 + target/riscv/cpu.h | 13 +- target/riscv/helper.h | 4 + hw/char/sifive_uart.c | 1 + hw/intc/riscv_aplic.c | 116 ++++++--- hw/intc/riscv_imsic.c | 19 ++ hw/misc/mchp_pfsoc_ioscb.c | 47 +++- hw/misc/mchp_pfsoc_sysreg.c | 13 + hw/riscv/riscv-iommu-hpm.c | 3 +- hw/riscv/riscv-iommu.c | 96 ++++++-- hw/riscv/shakti_c.c | 1 + hw/riscv/spike.c | 1 - hw/riscv/virt-acpi-build.c | 3 +- hw/riscv/virt.c | 4 +- target/riscv/cpu.c | 327 +++++++++---------------- target/riscv/csr.c | 36 ++- target/riscv/kvm/kvm-cpu.c | 62 +++-- target/riscv/machine.c | 20 ++ target/riscv/pmp.c | 4 +- target/riscv/riscv-qmp-cmds.c | 30 +-- target/riscv/tcg/tcg-cpu.c | 192 +++++++-------- target/riscv/vector_helper.c | 18 ++ target/riscv/insn_trans/trans_rvv.c.inc | 45 ++-- hw/intc/trace-events | 4 + pc-bios/opensbi-riscv32-generic-fw_dynamic.bin | Bin 268752 -> 270384 bytes pc-bios/opensbi-riscv64-generic-fw_dynamic.bin | Bin 273048 -> 275928 bytes roms/opensbi | 2 +- 30 files changed, 613 insertions(+), 487 deletions(-) From: Alistair Francis <alistair.francis@wdc.com> In QEMU 10.0 we deprecated the default spike machine, let's finally remove spike as the default and require users to specify the machine. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Chao Liu <chao.liu.zevorn@gmail.com> Message-ID: <20260430052218.771358-2-alistair.francis@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- docs/about/deprecated.rst | 18 ------------------ docs/about/removed-features.rst | 14 ++++++++++++++ hw/riscv/spike.c | 1 - 3 files changed, 14 insertions(+), 19 deletions(-) diff --git a/docs/about/deprecated.rst b/docs/about/deprecated.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/about/deprecated.rst +++ b/docs/about/deprecated.rst @@ -XXX,XX +XXX,XX @@ better reflects the way this property affects all random data within the device tree blob, not just the ``kaslr-seed`` node. -RISC-V default machine option (since 10.0) -'''''''''''''''''''''''''''''''''''''''''' - -RISC-V defines ``spike`` as the default machine if no machine option is -given in the command line. This happens because ``spike`` is the first -RISC-V machine implemented in QEMU and setting it as default was -convenient at that time. Now we have 7 riscv64 and 6 riscv32 machines -and having ``spike`` as a default is no longer justified. This default -will also promote situations where users think they're running ``virt`` -(the most used RISC-V machine type in 10.0) when in fact they're -running ``spike``. - -Removing the default machine option forces users to always set the machine -they want to use and avoids confusion. Existing users of the ``spike`` -machine must ensure that they're setting the ``spike`` machine in the -command line (``-M spike``). - - Backend options --------------- diff --git a/docs/about/removed-features.rst b/docs/about/removed-features.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/about/removed-features.rst +++ b/docs/about/removed-features.rst @@ -XXX,XX +XXX,XX @@ firmware is available to boot it. It can be replaced by the ``ast2700fc``, another multi-SoC machine based on the newer AST2700 SoCs which are excepted to receive better support in the future. +RISC-V default machine (removed in 11.1) +'''''''''''''''''''''''''''''''''''''''' + +RISC-V used to define ``spike`` as the default machine if no machine option +was given via the command line. This happend because ``spike`` was the first +RISC-V machine implemented in QEMU and setting it as default was +convenient at that time. Now we have 7 riscv64 and 6 riscv32 machines +and having ``spike`` as a default is no longer justified. + +The default machine option has been removed, forcing users to always set the +machine they want to use to avoid confusion. Existing users of the ``spike`` +machine must ensure that they're setting the ``spike`` machine in the +command line (``-M spike``). + linux-user mode CPUs -------------------- diff --git a/hw/riscv/spike.c b/hw/riscv/spike.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/spike.c +++ b/hw/riscv/spike.c @@ -XXX,XX +XXX,XX @@ static void spike_machine_class_init(ObjectClass *oc, const void *data) mc->desc = "RISC-V Spike board"; mc->init = spike_board_init; mc->max_cpus = SPIKE_CPUS_MAX; - mc->is_default = true; mc->default_cpu_type = TYPE_RISCV_CPU_BASE; mc->possible_cpu_arch_ids = riscv_numa_possible_cpu_arch_ids; mc->cpu_index_to_instance_props = riscv_numa_cpu_index_to_props; -- 2.53.0 From: Alistair Francis <alistair.francis@wdc.com> The RISC-V shakti_c machine hasn't had meaningful contributions since 2021 and is currently unmaintained. The machine is scheduled to be removed as it appears to have no users. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Chao Liu <chao.liu.zevorn@gmail.com> Message-ID: <20260430052218.771358-3-alistair.francis@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- docs/about/deprecated.rst | 7 +++++++ hw/riscv/shakti_c.c | 1 + 2 files changed, 8 insertions(+) diff --git a/docs/about/deprecated.rst b/docs/about/deprecated.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/about/deprecated.rst +++ b/docs/about/deprecated.rst @@ -XXX,XX +XXX,XX @@ deprecated; use the new name ``dtb-randomness`` instead. The new name better reflects the way this property affects all random data within the device tree blob, not just the ``kaslr-seed`` node. +RISC-V Shakti machine (since 11.1) +'''''''''''''''''''''''''''''''''' + +The RISC-V ``shakti_c`` machine hasn't had meaningful contributions since 2021 +and is currently unmaintained. The machine is scheduled to be removed as it +appears to have no users. + Backend options --------------- diff --git a/hw/riscv/shakti_c.c b/hw/riscv/shakti_c.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/shakti_c.c +++ b/hw/riscv/shakti_c.c @@ -XXX,XX +XXX,XX @@ static void shakti_c_machine_class_init(ObjectClass *klass, const void *data) mc->init = shakti_c_machine_state_init; mc->default_cpu_type = TYPE_RISCV_CPU_SHAKTI_C; mc->valid_cpu_types = valid_cpu_types; + mc->deprecation_reason = "Currently unmaintained with no known users"; mc->default_ram_id = "riscv.shakti.c.ram"; } -- 2.53.0 From: Frank Chang <frank.chang@sifive.com> MISA.C is set if the following extensions are selected: * Zca and not F. * Zca, Zcf and F (but not D) is specified (RV32 only). * Zca, Zcf and Zcd if D is specified (RV32 only). * Zca, Zcd if D is specified (RV64 only). Therefore, MISA.C must be set according to the Zc* extension rules. Warn the user if RVC is explicitly disabled but MISA.C is required by the rules above. Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Max Chou <max.chou@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260424050509.3935180-2-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 39 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_enable_implied_rules(RISCVCPU *cpu) } } +/* + * MISA.C is set if the following extensions are selected: + * - Zca and not F. + * - Zca, Zcf and F (but not D) is specified on RV32. + * - Zca, Zcf and Zcd if D is specified on RV32. + * - Zca, Zcd if D is specified on RV64. + */ +static void riscv_cpu_update_misa_c(RISCVCPU *cpu) +{ + CPURISCVState *env = &cpu->env; + bool set_misa_c = false; + + if (riscv_has_ext(env, RVC)) { + return; + } + + if (cpu->cfg.ext_zca && !riscv_has_ext(env, RVF)) { + set_misa_c = true; + } else if (riscv_cpu_mxl(env) == MXL_RV32 && + cpu->cfg.ext_zca && cpu->cfg.ext_zcf && + (riscv_has_ext(env, RVD) ? cpu->cfg.ext_zcd : + riscv_has_ext(env, RVF))) { + set_misa_c = true; + } else if (riscv_cpu_mxl(env) == MXL_RV64 && + cpu->cfg.ext_zca && cpu->cfg.ext_zcd) { + set_misa_c = true; + } + + if (set_misa_c) { + if (cpu_misa_ext_is_user_set(RVC)) { + warn_report("RVC mandated by Zca/Zcf/Zcd extensions"); + return; + } + + riscv_cpu_set_misa_ext(env, env->misa_ext | RVC); + } +} + void riscv_tcg_cpu_finalize_features(RISCVCPU *cpu, Error **errp) { CPURISCVState *env = &cpu->env; @@ -XXX,XX +XXX,XX @@ void riscv_tcg_cpu_finalize_features(RISCVCPU *cpu, Error **errp) riscv_cpu_init_implied_exts_rules(); riscv_cpu_enable_implied_rules(cpu); + riscv_cpu_update_misa_c(cpu); riscv_cpu_validate_misa_priv(env, &local_err); if (local_err != NULL) { -- 2.53.0 From: Frank Chang <frank.chang@sifive.com> MISA.X is set if there are any non-standard extensions. We should set MISA.X when any of the vendor extensions is enabled. Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Max Chou <max.chou@sifive.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260424050509.3935180-3-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 1 + target/riscv/tcg/tcg-cpu.c | 15 +++++++++++++++ 2 files changed, 16 insertions(+) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState CPURISCVState; #define RVH RV('H') #define RVG RV('G') #define RVB RV('B') +#define RVX RV('X') extern const uint32_t misa_bits[]; const char *riscv_get_misa_ext_name(uint32_t bit); diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_update_misa_c(RISCVCPU *cpu) } } +/* MISA.X is set when any of the non-standard extensions is enabled. */ +static void riscv_cpu_update_misa_x(RISCVCPU *cpu) +{ + CPURISCVState *env = &cpu->env; + const RISCVCPUMultiExtConfig *arr = riscv_cpu_vendor_exts; + + for (int i = 0; arr[i].name != NULL; i++) { + if (isa_ext_is_enabled(cpu, arr[i].offset)) { + riscv_cpu_set_misa_ext(env, env->misa_ext | RVX); + break; + } + } +} + void riscv_tcg_cpu_finalize_features(RISCVCPU *cpu, Error **errp) { CPURISCVState *env = &cpu->env; @@ -XXX,XX +XXX,XX @@ void riscv_tcg_cpu_finalize_features(RISCVCPU *cpu, Error **errp) riscv_cpu_init_implied_exts_rules(); riscv_cpu_enable_implied_rules(cpu); riscv_cpu_update_misa_c(cpu); + riscv_cpu_update_misa_x(cpu); riscv_cpu_validate_misa_priv(env, &local_err); if (local_err != NULL) { -- 2.53.0 From: Alistair Francis <alistair.francis@wdc.com> Mark the OpenSBI Firmware as maintained by me (Alistair Francis) and add Daniel Henrique Barboza as a reviewer. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20260506234243.1873782-1-alistair.francis@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- MAINTAINERS | 2 ++ 1 file changed, 2 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ S: Supported F: hw/i386/amd_iommu* OpenSBI Firmware +M: Alistair Francis <Alistair.Francis@wdc.com> +R: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> L: qemu-riscv@nongnu.org S: Supported F: pc-bios/opensbi-* -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Update OpenSBI and the pre-built opensbi32 and opensbi64 images to version 1.8.1. We're going for the intermediate/bug fix release 1.8.1 directly due to a PMP related fix that was impacting QEMU profile CPUs. Changelog for v1.8.1: * Typo fix in comments of sbi_hartindex_to_hartid() * Fix hart protection abstraction for platforms without PMP Changelog for v1.8 includes, among other things: - IPI device ratings - SiFive CLINT v2 support - SiFive PL2 cache controller driver - SiFive Extensible Cache (EC) driver - SiFive TMC0 based HSM driver - SiFive SMC0 based system suspend driver - MPXY RPMI mailbox driver for voltage service group - MPXY RPMI mailbox driver for device power service group - MPXY RPMI mailbox driver for performance service group Check out the full release log at [1] for more info. [1] https://github.com/riscv-software-src/opensbi/releases/tag/v1.8 Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260108160825.171794-1-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- .../opensbi-riscv32-generic-fw_dynamic.bin | Bin 268752 -> 270384 bytes .../opensbi-riscv64-generic-fw_dynamic.bin | Bin 273048 -> 275928 bytes roms/opensbi | 2 +- 3 files changed, 1 insertion(+), 1 deletion(-) diff --git a/pc-bios/opensbi-riscv32-generic-fw_dynamic.bin b/pc-bios/opensbi-riscv32-generic-fw_dynamic.bin index XXXXXXX..XXXXXXX 100644 Binary files a/pc-bios/opensbi-riscv32-generic-fw_dynamic.bin and b/pc-bios/opensbi-riscv32-generic-fw_dynamic.bin differ diff --git a/pc-bios/opensbi-riscv64-generic-fw_dynamic.bin b/pc-bios/opensbi-riscv64-generic-fw_dynamic.bin index XXXXXXX..XXXXXXX 100644 Binary files a/pc-bios/opensbi-riscv64-generic-fw_dynamic.bin and b/pc-bios/opensbi-riscv64-generic-fw_dynamic.bin differ diff --git a/roms/opensbi b/roms/opensbi index XXXXXXX..XXXXXXX 160000 --- a/roms/opensbi +++ b/roms/opensbi @@ -1 +1 @@ -Subproject commit a32a91069119e7a5aa31e6bc51d5e00860be3d80 +Subproject commit 74434f255873d74e56cc50aa762d1caf24c099f8 -- 2.53.0 From: Mohamed Ayman <mohamedaymanworkspace@gmail.com> Use a pointer to the hart instead of copying RISCVCPU when passing pmu_avail_ctrs to riscv_pmu_generate_fdt_node(). Signed-off-by: Mohamed Ayman <mohamedaymanworkspace@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260503180252.1122776-1-mohamedaymanworkspace@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_pmu(RISCVVirtState *s) { g_autofree char *pmu_name = g_strdup_printf("/pmu"); MachineState *ms = MACHINE(s); - RISCVCPU hart = s->soc[0].harts[0]; + RISCVCPU *hart = &s->soc[0].harts[0]; qemu_fdt_add_subnode(ms->fdt, pmu_name); qemu_fdt_setprop_string(ms->fdt, pmu_name, "compatible", "riscv,pmu"); - riscv_pmu_generate_fdt_node(ms->fdt, hart.pmu_avail_ctrs, pmu_name); + riscv_pmu_generate_fdt_node(ms->fdt, hart->pmu_avail_ctrs, pmu_name); } static void create_fdt_sockets(RISCVVirtState *s, -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> The Zicfilp extension adds the MLPE field to the mseccfg CSR. According to the RISC-V Privileged Specification, mseccfg exists if any extension that adds a field to it is implemented. Currently, the `have_mseccfg()` predicate function checks for Smepmp, Zkr, and Smmpm, but misses Zicfilp. As a result, if a CPU is configured with `zicfilp=true` but without the other extensions, accessing the mseccfg CSR will incorrectly raise an illegal instruction exception. This patch adds the missing check for `ext_zicfilp` to ensure the CSR is properly accessible when the Zicfilp extension is enabled. This issue was discovered and reported by SpecHunter, an AI-driven architecture specification analysis tool. Link: https://github.com/yizishun/rv-isa-sec/blob/master/output/riscv-isa-manual/pr-2561/qemu.txt Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Reviewed-by: Chao Liu <chao.liu.zevorn@gmail.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260511072705.3015986-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException have_mseccfg(CPURISCVState *env, int csrno) if (riscv_cpu_cfg(env)->ext_smmpm) { return RISCV_EXCP_NONE; } + if (riscv_cpu_cfg(env)->ext_zicfilp) { + return RISCV_EXCP_NONE; + } return RISCV_EXCP_ILLEGAL_INST; } -- 2.53.0 From: Andrew Jones <andrew.jones@oss.qualcomm.com> The Svnapot extension encodes a 64KB leaf PTE by setting PTE_N and storing bits [3:0] of the PPN as a NAPOT size indicator. The IOMMU model wasn't checking PTE_N and therefore was using the raw (NAPOT- encoded) PPN directly in the physical address, yielding an address 32 KB above the correct base. Fix both riscv_iommu_spa_fetch() and pdt_memory_read() by mirroring the Svnapot handling already present in target/riscv/cpu_helper.c: napot_bits = ctz64(ppn) + 1 /* 4 for 64KB */ napot_mask = (1 << napot_bits) - 1 /* 0xF */ phys_base = PPN_PHYS(ppn & ~napot_mask) page_offset = addr & (PPN_PHYS(napot_mask) | (TARGET_PAGE_SIZE - 1)) The spec only defines napot_bits == 4 (64KB); any other value is treated as a reserved encoding. This is a fix, rather than new feature support, because the spec says "IOMMU implementations must support the Svnapot standard extension for NAPOT Translation Contiguity." Fixes: 0c54acb8243d ("hw/riscv: add RISC-V IOMMU base emulation") Cc: qemu-stable@nongnu.org Signed-off-by: Andrew Jones <andrew.jones@oss.qualcomm.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Nutty Liu <nutty.liu@hotmail.com> Reviewed-by: Tomasz Jeznach <tjeznach@rivosinc.com> Message-ID: <20260508205129.377032-1-andrew.jones@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu.c | 44 ++++++++++++++++++++++++++++++++++++++---- 1 file changed, 40 insertions(+), 4 deletions(-) diff --git a/hw/riscv/riscv-iommu.c b/hw/riscv/riscv-iommu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.c +++ b/hw/riscv/riscv-iommu.c @@ -XXX,XX +XXX,XX @@ static bool riscv_iommu_msi_check(RISCVIOMMUState *s, RISCVIOMMUContext *ctx, return true; } +/* Returns the NAPOT page mask, or 0 for reserved encodings. */ +static hwaddr riscv_iommu_napot_page_mask(hwaddr ppn, hwaddr addr, hwaddr *out) +{ + int napot_bits = ctz64(ppn) + 1; + hwaddr napot_mask, page_mask; + + /* The spec only defines 64KB (napot_bits == 4) */ + if (napot_bits != 4) { + return 0; + } + + napot_mask = (1ULL << napot_bits) - 1; + page_mask = PPN_PHYS(napot_mask) | (TARGET_PAGE_SIZE - 1); + + *out = PPN_PHYS(ppn & ~napot_mask) | (addr & page_mask); + + return page_mask; +} + /* * RISCV IOMMU Address Translation Lookup - Page Table Walk * @@ -XXX,XX +XXX,XX @@ static int riscv_iommu_spa_fetch(RISCVIOMMUState *s, RISCVIOMMUContext *ctx, } else { /* Leaf PTE, translation completed. */ sc[pass].step = sc[pass].levels; - base = PPN_PHYS(ppn) | (addr & ((1ULL << va_skip) - 1)); - /* Update address mask based on smallest translation granularity */ - iotlb->addr_mask &= (1ULL << va_skip) - 1; + + if (pte & PTE_N) { + hwaddr mask = riscv_iommu_napot_page_mask(ppn, addr, &base); + + if (!mask) { + break; + } + iotlb->addr_mask &= mask; + } else { + base = PPN_PHYS(ppn) | (addr & ((1ULL << va_skip) - 1)); + /* Update address mask based on smallest translation granularity */ + iotlb->addr_mask &= (1ULL << va_skip) - 1; + } + /* Continue with S-Stage translation? */ if (pass && sc[0].step != sc[0].levels) { pass = S_STAGE; @@ -XXX,XX +XXX,XX @@ static MemTxResult pdt_memory_read(RISCVIOMMUState *s, return MEMTX_ACCESS_ERROR; /* Misaligned PPN */ } else { /* Leaf PTE, translation completed. */ - base = PPN_PHYS(ppn) | (addr & ((1ULL << va_skip) - 1)); + if (pte & PTE_N) { + if (!riscv_iommu_napot_page_mask(ppn, addr, &base)) { + return MEMTX_ACCESS_ERROR; + } + } else { + base = PPN_PHYS(ppn) | (addr & ((1ULL << va_skip) - 1)); + } break; } -- 2.53.0 From: Anton Blanchard <antonb@tenstorrent.com> Widening reductions read vs2 as a vector of SEW elements and vs1[0] as a scalar of 2*SEW. The ISA does not allow the same vector register to be read with different EEWs, so they must not overlap. vs1 is read as a scalar from element 0, so it is treated as a single vector register (independent of LMUL) when checking overlap. Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3208 Signed-off-by: Anton Blanchard <antonb@tenstorrent.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260417080328.31918-1-antonb@tenstorrent.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/insn_trans/trans_rvv.c.inc | 1 + 1 file changed, 1 insertion(+) diff --git a/target/riscv/insn_trans/trans_rvv.c.inc b/target/riscv/insn_trans/trans_rvv.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_rvv.c.inc +++ b/target/riscv/insn_trans/trans_rvv.c.inc @@ -XXX,XX +XXX,XX @@ GEN_OPIVV_TRANS(vredxor_vs, reduction_check) static bool reduction_widen_check(DisasContext *s, arg_rmrr *a) { return reduction_check(s, a) && (s->sew < MO_64) && + !is_overlapped(a->rs1, 1, a->rs2, 1 << MAX(s->lmul, 0)) && ((s->sew + 1) <= (s->cfg_ptr->elen >> 4)); } -- 2.53.0 From: Frank Chang <frank.chang@sifive.com> It's possible that the transmit watermark level (txctrl.txcnt) is updated when the user writes to txctrl register, which may decrease the transmit watermark level to less than the number of entries in the transmit FIFO. In such a case, the interrupt should be raised so we need to call sifive_uart_update_irq() to check and update interrupt when txctrl register is written. Otherwise, the interrupt will have to be delayed until next TX FIFO transmission is processed. Suggested-by: Chao Liu <chao.liu.zevorn@gmail.com> Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260513030503.3665414-1-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/char/sifive_uart.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/char/sifive_uart.c b/hw/char/sifive_uart.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/sifive_uart.c +++ b/hw/char/sifive_uart.c @@ -XXX,XX +XXX,XX @@ sifive_uart_write(void *opaque, hwaddr addr, if (SIFIVE_UART_TXEN(s->txctrl) && !fifo8_is_empty(&s->tx_fifo)) { sifive_uart_trigger_tx_fifo(s); } + sifive_uart_update_irq(s); return; case SIFIVE_UART_RXCTRL: s->rxctrl = val64; -- 2.53.0 From: Abhigyan Kumar <314abh@gmail.com> RISC-V Privileged Specification 3.1.8 (Machine Trap Delegation Registers (medeleg and mideleg)) mentions: "For exceptions that cannot occur in less privileged modes, the corresponding medeleg bits should be read-only zero. In particular, medeleg[11] is read-only zero." QEMU incorrectly included RISCV_EXCP_M_ECALL in DELEGABLE_EXCPS. It allowed the 11th bit to be written and read as set. Fixed by removing it from the DELEGABLE_EXCPS mask, adhering to the specification. Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3438 Signed-off-by: Abhigyan Kumar <314abh@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260427060849.749179-2-314abh@gmail.com> [ Changes by AF: - Remove comment ] Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 1 - 1 file changed, 1 deletion(-) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static const uint64_t all_ints = M_MODE_INTERRUPTS | S_MODE_INTERRUPTS | (1ULL << (RISCV_EXCP_U_ECALL)) | \ (1ULL << (RISCV_EXCP_S_ECALL)) | \ (1ULL << (RISCV_EXCP_VS_ECALL)) | \ - (1ULL << (RISCV_EXCP_M_ECALL)) | \ (1ULL << (RISCV_EXCP_INST_PAGE_FAULT)) | \ (1ULL << (RISCV_EXCP_LOAD_PAGE_FAULT)) | \ (1ULL << (RISCV_EXCP_STORE_PAGE_FAULT)) | \ -- 2.53.0 From: "chen.zhongyao@zte.com.cn" <chen.zhongyao@zte.com.cn> The risc-v vector spec defines vmv.s.x and vfmv.s.f as writing element 0 of the destination register while the remaining destination elements follow the current tail policy. When QEMU runs with rvv_ta_all_1s enabled, those elements must therefore become all 1s. QEMU handled both instructions as translation-time special cases that directly wrote vd[0] and skipped the usual tail processing. As a result, vmv.s.x and vfmv.s.f left the remaining destination elements unchanged instead of applying the configured tail policy. Fix this by routing both instructions through a helper that writes vd[0] and then treats the rest of the destination register as tail, reusing the existing agnostic-element fill logic. Signed-off-by: Zhongyao Chen <chen.zhongyao@zte.com.cn> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <202605061005.646A537u037157@mse-fl1.zte.com.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/helper.h | 4 +++ target/riscv/vector_helper.c | 18 ++++++++++ target/riscv/insn_trans/trans_rvv.c.inc | 44 ++++++++----------------- 3 files changed, 36 insertions(+), 30 deletions(-) diff --git a/target/riscv/helper.h b/target/riscv/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/helper.h +++ b/target/riscv/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_4(vmv_v_x_b, void, ptr, i64, env, i32) DEF_HELPER_4(vmv_v_x_h, void, ptr, i64, env, i32) DEF_HELPER_4(vmv_v_x_w, void, ptr, i64, env, i32) DEF_HELPER_4(vmv_v_x_d, void, ptr, i64, env, i32) +DEF_HELPER_4(vset_velem0_b, void, ptr, i64, env, i32) +DEF_HELPER_4(vset_velem0_h, void, ptr, i64, env, i32) +DEF_HELPER_4(vset_velem0_w, void, ptr, i64, env, i32) +DEF_HELPER_4(vset_velem0_d, void, ptr, i64, env, i32) DEF_HELPER_6(vsaddu_vv_b, void, ptr, ptr, ptr, ptr, env, i32) DEF_HELPER_6(vsaddu_vv_h, void, ptr, ptr, ptr, ptr, env, i32) diff --git a/target/riscv/vector_helper.c b/target/riscv/vector_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/vector_helper.c +++ b/target/riscv/vector_helper.c @@ -XXX,XX +XXX,XX @@ GEN_VEXT_VMV_VX(vmv_v_x_h, int16_t, H2) GEN_VEXT_VMV_VX(vmv_v_x_w, int32_t, H4) GEN_VEXT_VMV_VX(vmv_v_x_d, int64_t, H8) +#define GEN_VEXT_SET_VELEM0(NAME, ETYPE, H) \ +void HELPER(NAME)(void *vd, uint64_t s1, CPURISCVState *env, \ + uint32_t desc) \ +{ \ + uint32_t esz = sizeof(ETYPE); \ + uint32_t vlenb = riscv_cpu_cfg(env)->vlenb; \ + uint32_t vta = vext_vta(desc); \ + \ + *((ETYPE *)vd + H(0)) = (ETYPE)s1; \ + /* Treat every element past vd[0] as tail for scalar-to-vector moves. */ \ + vext_set_elems_1s(vd, vta, esz, vlenb); \ +} + +GEN_VEXT_SET_VELEM0(vset_velem0_b, int8_t, H1) +GEN_VEXT_SET_VELEM0(vset_velem0_h, int16_t, H2) +GEN_VEXT_SET_VELEM0(vset_velem0_w, int32_t, H4) +GEN_VEXT_SET_VELEM0(vset_velem0_d, int64_t, H8) + #define GEN_VEXT_VMERGE_VV(NAME, ETYPE, H) \ void HELPER(NAME)(void *vd, void *v0, void *vs1, void *vs2, \ CPURISCVState *env, uint32_t desc) \ diff --git a/target/riscv/insn_trans/trans_rvv.c.inc b/target/riscv/insn_trans/trans_rvv.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_rvv.c.inc +++ b/target/riscv/insn_trans/trans_rvv.c.inc @@ -XXX,XX +XXX,XX @@ static void vec_element_loadi(DisasContext *s, TCGv_i64 dest, load_element(dest, tcg_env, endian_ofs(s, vreg, idx), s->sew, sign); } -/* Integer Scalar Move Instruction */ +typedef void gen_helper_vset_velem0(TCGv_ptr, TCGv_i64, TCGv_env, TCGv_i32); -static void store_element(TCGv_i64 val, TCGv_ptr base, - int ofs, int sew) +static void vec_element_storei_tail(DisasContext *s, int vreg, TCGv_i64 val) { - switch (sew) { - case MO_8: - tcg_gen_st8_i64(val, base, ofs); - break; - case MO_16: - tcg_gen_st16_i64(val, base, ofs); - break; - case MO_32: - tcg_gen_st32_i64(val, base, ofs); - break; - case MO_64: - tcg_gen_st_i64(val, base, ofs); - break; - default: - g_assert_not_reached(); - } -} + static gen_helper_vset_velem0 * const fns[4] = { + gen_helper_vset_velem0_b, gen_helper_vset_velem0_h, + gen_helper_vset_velem0_w, gen_helper_vset_velem0_d, + }; + TCGv_ptr dest = tcg_temp_new_ptr(); + uint32_t data = FIELD_DP32(0, VDATA, VTA, s->vta); + TCGv_i32 desc = tcg_constant_i32(simd_desc(s->cfg_ptr->vlenb, + s->cfg_ptr->vlenb, data)); -/* - * Store vreg[idx] = val. - * The index must be in range of VLMAX. - */ -static void vec_element_storei(DisasContext *s, int vreg, - int idx, TCGv_i64 val) -{ - store_element(val, tcg_env, endian_ofs(s, vreg, idx), s->sew); + tcg_gen_addi_ptr(dest, tcg_env, vreg_ofs(s, vreg)); + fns[s->sew](dest, val, tcg_env, desc); } /* vmv.x.s rd, vs2 # x[rd] = vs2[0] */ @@ -XXX,XX +XXX,XX @@ static bool trans_vmv_s_x(DisasContext *s, arg_vmv_s_x *a) */ s1 = get_gpr(s, a->rs1, EXT_NONE); tcg_gen_ext_tl_i64(t1, s1); - vec_element_storei(s, a->rd, 0, t1); + vec_element_storei_tail(s, a->rd, t1); gen_set_label(over); tcg_gen_movi_tl(cpu_vstart, 0); finalize_rvv_inst(s); @@ -XXX,XX +XXX,XX @@ static bool trans_vfmv_s_f(DisasContext *s, arg_vfmv_s_f *a) t1 = tcg_temp_new_i64(); do_nanbox(s, t1, cpu_fpr[a->rs1]); - vec_element_storei(s, a->rd, 0, t1); + vec_element_storei_tail(s, a->rd, t1); gen_set_label(over); tcg_gen_movi_tl(cpu_vstart, 0); -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> The RISC-V unpriv specification (zvk.adoc) states that "Zvknhb implies Zvknha". This means that enabling Zvknhb should automatically enable Zvknha. Add Zvknha to ZVKNHB_IMPLIED to ensure the dependency is correctly enforced. This issue was discovered and reported by SpecHunter, an AI-driven architecture specification analysis tool. Link:https://github.com/yizishun/rv-isa-sec/blob/master/output/riscv-isa-manual/pr-2635/qemu.txt Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260511051736.2916225-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static RISCVCPUImpliedExtsRule ZVKNG_IMPLIED = { static RISCVCPUImpliedExtsRule ZVKNHB_IMPLIED = { .ext = CPU_CFG_OFFSET(ext_zvknhb), .implied_multi_exts = { - CPU_CFG_OFFSET(ext_zve64x), + CPU_CFG_OFFSET(ext_zve64x), CPU_CFG_OFFSET(ext_zvknha), RISCV_IMPLIED_EXTS_RULE_END }, -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> Currently, the MENVCFG_CDE (Counter Delegation Enable) bit is unconditionally included in the base write mask for CSR_MENVCFG. This make the subsequent conditional check `(cfg->ext_smcdeleg ? MENVCFG_CDE : 0)` completely ineffective, as a bitwise OR cannot clear a bit that is already set. Fix this by removing MENVCFG_CDE from the initial base mask. The bit will now only be writable when explicitly granted by the `ext_smcdeleg` configuration. This issue was discovered and reported by SpecHunter, an AI-driven architecture specification analysis tool. Link: https://github.com/yizishun/rv-isa-sec/blob/master/output/riscv-isa-manual/pr-2601/qemu.txt Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260511040534.2862443-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException write_menvcfg(CPURISCVState *env, int csrno, { const RISCVCPUConfig *cfg = riscv_cpu_cfg(env); uint64_t mask = MENVCFG_FIOM | MENVCFG_CBIE | MENVCFG_CBCFE | - MENVCFG_CBZE | MENVCFG_CDE; + MENVCFG_CBZE; bool stce_changed = false; if (riscv_cpu_mxl(env) == MXL_RV64) { -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> According to the RISC-V smcdeleg specification: "When menvcfg.CDE=0, attempts to access scountinhibit raise an illegal-instruction exception." The current implementation of scountinhibit_pred() only checks the hardware extensions (ext_ssccfg, ext_smcdeleg) and virtualization status, but completely misses the runtime environment configuration check (menvcfg.CDE). This allows S-mode to access scountinhibit even when the M-mode has explicitly disabled counter delegation. This issue was discovered by the SpecHunter tool (https://github.com/yizishun/rv-isa-sec/blob/master/output/riscv-isa-manual/pr-2571/qemu.txt). Fixes: 6247dc2ef70b ("target/riscv: Add counter delegation/configuration support") Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260508174917.371667-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException scountinhibit_pred(CPURISCVState *env, int csrno) return RISCV_EXCP_ILLEGAL_INST; } + if (!get_field(env->menvcfg, MENVCFG_CDE)) { + return RISCV_EXCP_ILLEGAL_INST; + } + if (env->virt_enabled) { return RISCV_EXCP_VIRT_INSTRUCTION_FAULT; } -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> According to the RISC-V Privileged Manual: "The Sv32 page-based virtual-memory scheme described in sv32 supports 34-bit physical addresses for RV32, so the PMP scheme must support addresses wider than XLEN for RV32." However, the current QEMU implementation uses `target_ulong` (which resolves to `uint32_t` on RV32) for PMP address variables. When shifting these addresses left (e.g., `this_addr << 2`), an integer overflow occurs, truncating the high bits of the 34-bit physical address. Fix this issue by changing the types of PMP address variables (`this_addr` and `prev_addr`) to `hwaddr`. This issue was discovered and reported by SpecHunter, an AI-driven architecture specification analysis tool. Link: https://github.com/yizishun/rv-isa-sec/blob/master/output/riscv-isa-manual/pr-2472/qemu.txt Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260511102627.3120140-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/pmp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/riscv/pmp.c b/target/riscv/pmp.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/pmp.c +++ b/target/riscv/pmp.c @@ -XXX,XX +XXX,XX @@ static void pmp_decode_napot(hwaddr a, hwaddr *sa, hwaddr *ea) void pmp_update_rule_addr(CPURISCVState *env, uint32_t pmp_index) { uint8_t this_cfg = env->pmp_state.pmp[pmp_index].cfg_reg; - target_ulong this_addr = env->pmp_state.pmp[pmp_index].addr_reg; - target_ulong prev_addr = 0u; + hwaddr this_addr = env->pmp_state.pmp[pmp_index].addr_reg; + hwaddr prev_addr = 0u; hwaddr sa = 0u; hwaddr ea = 0u; int g = pmp_get_granularity_g(env); -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> Currently, the Machine Security Configuration Register (mseccfg) was missing from the live migration state. This omission causes the register to be reset to zero on the destination host after migration. Fixed by adding vmstate_mseccfg subsection This vulnerability was discovered and reported by SpecHunter, an AI-driven architecture specification analysis tool. Link: https://github.com/yizishun/rv-isa-sec/blob/a22e4459cd026ae970791dfbd9cfe5d110fbd46b/output/riscv-isa-manual/pr-1879/qemu.txt#L121 Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260511124828.3210477-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/machine.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/target/riscv/machine.c b/target/riscv/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/machine.c +++ b/target/riscv/machine.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_sstc = { } }; +static bool mseccfg_needed(void *opaque) +{ + RISCVCPU *cpu = opaque; + + return cpu->cfg.ext_smepmp || cpu->cfg.ext_zkr + || cpu->cfg.ext_smmpm || cpu->cfg.ext_zicfilp; +} + +static const VMStateDescription vmstate_mseccfg = { + .name = "cpu/mseccfg", + .version_id = 1, + .minimum_version_id = 1, + .needed = mseccfg_needed, + .fields = (const VMStateField[]) { + VMSTATE_UINTTL(env.mseccfg, RISCVCPU), + VMSTATE_END_OF_LIST() + } +}; + const VMStateDescription vmstate_riscv_cpu = { .name = "cpu", .version_id = 11, @@ -XXX,XX +XXX,XX @@ const VMStateDescription vmstate_riscv_cpu = { &vmstate_ssp, &vmstate_ctr, &vmstate_sstc, + &vmstate_mseccfg, NULL } }; -- 2.53.0 From: Alistair Francis <alistair.francis@wdc.com> The RISC-V spec describes bits 0-15 as standard fixed interrupts. The AIA spec on the other hand describes bits 0-12 as standard fixed interrupts. This conflict causes issues for us as we don't dynamically determine if AIA is enabled when setting the *delegable_ints consts. This means currently we incorrectly treat the LCOFIP bit as delegable, even if AIA is disabled, which is incorrect (see the issues mentioned below). The AIA spec indicates that implementations can determine which bits of 13-63 in mvien are writable, so let's just make it bits 15-63 to match the main spec. Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3133 Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3134 Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3135 Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3138 Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3140 Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260513051841.1671987-1-alistair.francis@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException write_stimecmph(CPURISCVState *env, int csrno, #define VSTOPI_NUM_SRCS 5 /* - * All core local interrupts except the fixed ones 0:12. This macro is for + * All core local interrupts except the fixed ones 0:15. This macro is for * virtual interrupts logic so please don't change this to avoid messing up * the whole support, For reference see AIA spec: `5.3 Interrupt filtering and * virtual interrupts for supervisor level` and `6.3.2 Virtual interrupts for * VS level`. */ -#define LOCAL_INTERRUPTS (~0x1FFFULL) +#define LOCAL_INTERRUPTS (~0xFFFFULL) static const uint64_t delegable_ints = S_MODE_INTERRUPTS | VS_MODE_INTERRUPTS | MIP_LCOFIP; -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> Currently, the `mseccfg` CSR is only cleared to 0 during reset if the `ext_smepmp` is enabled. However, this register is now shared by several other extensions such as `zkr`, `smmpm`, and `zicfilp`. Fix by clearing `mseccfg` if any dependent extension is present, and adjusting the relevant comments. This vulnerability was discovered and reported by SpecHunter, an AI-driven architecture specification analysis tool. Link: https://github.com/yizishun/rv-isa-sec/blob/master/output/riscv-svvptc/pr-134/qemu.txt Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260512052240.330815-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_reset_hold(Object *obj, ResetType type) /* * Clear mseccfg and unlock all the PMP entries upon reset. - * This is allowed as per the priv and smepmp specifications - * and is needed to clear stale entries across reboots. + * This is required as per the priv, smepmp, and other security + * extension specifications that share this CSR, and is needed + * to clear stale entries across reboots. */ - if (riscv_cpu_cfg(env)->ext_smepmp) { + if (riscv_cpu_cfg(env)->ext_smepmp || + riscv_cpu_cfg(env)->ext_zkr || + riscv_cpu_cfg(env)->ext_smmpm || + riscv_cpu_cfg(env)->ext_zicfilp) { env->mseccfg = 0; } -- 2.53.0 From: Zongmin Zhou <zhouzongmin@kylinos.cn> When the Zicbop extension is available expose it to the KVM guest. Also read and validate cbop_blocksize from the host via KVM interface. Signed-off-by: Zongmin Zhou <zhouzongmin@kylinos.cn> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <9e388aa9984ea9d3d0c85e1630c9195023938952.1778653159.git.zhouzongmin@kylinos.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/kvm/kvm-cpu.c | 34 ++++++++++++++++++++++++++++++++-- 1 file changed, 32 insertions(+), 2 deletions(-) diff --git a/target/riscv/kvm/kvm-cpu.c b/target/riscv/kvm/kvm-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/kvm/kvm-cpu.c +++ b/target/riscv/kvm/kvm-cpu.c @@ -XXX,XX +XXX,XX @@ static void kvm_cpu_csr_set_u64(RISCVCPU *cpu, KVMCPUConfig *csr_cfg, static KVMCPUConfig kvm_multi_ext_cfgs[] = { KVM_EXT_CFG("zicbom", ext_zicbom, KVM_RISCV_ISA_EXT_ZICBOM), + KVM_EXT_CFG("zicbop", ext_zicbop, KVM_RISCV_ISA_EXT_ZICBOP), KVM_EXT_CFG("zicboz", ext_zicboz, KVM_RISCV_ISA_EXT_ZICBOZ), KVM_EXT_CFG("ziccrse", ext_ziccrse, KVM_RISCV_ISA_EXT_ZICCRSE), KVM_EXT_CFG("zicntr", ext_zicntr, KVM_RISCV_ISA_EXT_ZICNTR), @@ -XXX,XX +XXX,XX @@ static KVMCPUConfig kvm_cboz_blocksize = { .kvm_reg_id = KVM_REG_RISCV_CONFIG_REG(zicboz_block_size) }; +static KVMCPUConfig kvm_cbop_blocksize = { + .name = "cbop_blocksize", + .offset = CPU_CFG_OFFSET(cbop_blocksize), + .kvm_reg_id = KVM_REG_RISCV_CONFIG_REG(zicbop_block_size) +}; + static KVMCPUConfig kvm_v_vlenb = { .name = "vlenb", .offset = CPU_CFG_OFFSET(vlenb), @@ -XXX,XX +XXX,XX @@ static void kvm_riscv_init_cfg(RISCVCPU *cpu, KVMScratchCPU *kvmcpu) kvm_riscv_read_cbomz_blksize(cpu, kvmcpu, &kvm_cbom_blocksize); } + if (cpu->cfg.ext_zicbop) { + kvm_riscv_read_cbomz_blksize(cpu, kvmcpu, &kvm_cbop_blocksize); + } + if (cpu->cfg.ext_zicboz) { kvm_riscv_read_cbomz_blksize(cpu, kvmcpu, &kvm_cboz_blocksize); } @@ -XXX,XX +XXX,XX @@ void riscv_kvm_cpu_finalize_features(RISCVCPU *cpu, Error **errp) int ret; /* short-circuit without spinning the scratch CPU */ - if (!cpu->cfg.ext_zicbom && !cpu->cfg.ext_zicboz && - !riscv_has_ext(env, RVV)) { + if (!cpu->cfg.ext_zicbom && !cpu->cfg.ext_zicbop && + !cpu->cfg.ext_zicboz && !riscv_has_ext(env, RVV)) { return; } @@ -XXX,XX +XXX,XX @@ void riscv_kvm_cpu_finalize_features(RISCVCPU *cpu, Error **errp) } } + if (cpu->cfg.ext_zicbop && + riscv_cpu_option_set(kvm_cbop_blocksize.name)) { + + reg.id = KVM_RISCV_REG_ID_ULONG(KVM_REG_RISCV_CONFIG, + kvm_cbop_blocksize.kvm_reg_id); + reg.addr = (uint64_t)&val; + ret = ioctl(kvmcpu.cpufd, KVM_GET_ONE_REG, &reg); + if (ret != 0) { + error_setg_errno(errp, errno, "Unable to read cbop_blocksize"); + return; + } + + if (cpu->cfg.cbop_blocksize != val) { + error_setg(errp, "Unable to set cbop_blocksize to a different " + "value than the host (%lu)", val); + return; + } + } + /* Users are setting vlen, not vlenb */ if (riscv_has_ext(env, RVV) && riscv_cpu_option_set("vlen")) { if (!kvm_v_vlenb.supported) { -- 2.53.0 From: Zongmin Zhou <zhouzongmin@kylinos.cn> Expose the BFloat16 extensions (Zfbfmin, Zvfbfmin, Zvfbfwma) to KVM guests when available in hardware. Signed-off-by: Zongmin Zhou <zhouzongmin@kylinos.cn> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <1258febb0eeb4ee286eb88f70b077a7f1ece507f.1778653159.git.zhouzongmin@kylinos.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/kvm/kvm-cpu.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/target/riscv/kvm/kvm-cpu.c b/target/riscv/kvm/kvm-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/kvm/kvm-cpu.c +++ b/target/riscv/kvm/kvm-cpu.c @@ -XXX,XX +XXX,XX @@ static KVMCPUConfig kvm_multi_ext_cfgs[] = { KVM_EXT_CFG("zacas", ext_zacas, KVM_RISCV_ISA_EXT_ZACAS), KVM_EXT_CFG("zawrs", ext_zawrs, KVM_RISCV_ISA_EXT_ZAWRS), KVM_EXT_CFG("zfa", ext_zfa, KVM_RISCV_ISA_EXT_ZFA), + KVM_EXT_CFG("zfbfmin", ext_zfbfmin, KVM_RISCV_ISA_EXT_ZFBFMIN), KVM_EXT_CFG("zfh", ext_zfh, KVM_RISCV_ISA_EXT_ZFH), KVM_EXT_CFG("zfhmin", ext_zfhmin, KVM_RISCV_ISA_EXT_ZFHMIN), KVM_EXT_CFG("zba", ext_zba, KVM_RISCV_ISA_EXT_ZBA), @@ -XXX,XX +XXX,XX @@ static KVMCPUConfig kvm_multi_ext_cfgs[] = { KVM_EXT_CFG("zvbc", ext_zvbc, KVM_RISCV_ISA_EXT_ZVBC), KVM_EXT_CFG("zvfh", ext_zvfh, KVM_RISCV_ISA_EXT_ZVFH), KVM_EXT_CFG("zvfhmin", ext_zvfhmin, KVM_RISCV_ISA_EXT_ZVFHMIN), + KVM_EXT_CFG("zvfbfmin", ext_zvfbfmin, KVM_RISCV_ISA_EXT_ZVFBFMIN), + KVM_EXT_CFG("zvfbfwma", ext_zvfbfwma, KVM_RISCV_ISA_EXT_ZVFBFWMA), KVM_EXT_CFG("zvkb", ext_zvkb, KVM_RISCV_ISA_EXT_ZVKB), KVM_EXT_CFG("zvkg", ext_zvkg, KVM_RISCV_ISA_EXT_ZVKG), KVM_EXT_CFG("zvkned", ext_zvkned, KVM_RISCV_ISA_EXT_ZVKNED), -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> Fix a mode-to-capability comparison error in riscv_iommu_validate_device_ctx. The code was comparing fsc_mode (a value) against a capability bitmask, making the SV32 support check ineffective. This issue was discovered and reported by SpecHunter, an AI-driven architecture specification analysis tool. Link: https://github.com/yizishun/rv-isa-sec/blob/master/output/riscv-iommu/pr-694/qemu.txt Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260511080904.3049446-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/riscv/riscv-iommu.c b/hw/riscv/riscv-iommu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.c +++ b/hw/riscv/riscv-iommu.c @@ -XXX,XX +XXX,XX @@ static bool riscv_iommu_validate_device_ctx(RISCVIOMMUState *s, } if (ctx->tc & RISCV_IOMMU_DC_TC_SXL) { - if (fsc_mode == RISCV_IOMMU_CAP_SV32 && + if (fsc_mode == RISCV_IOMMU_DC_FSC_IOSATP_MODE_SV32 && !(s->cap & RISCV_IOMMU_CAP_SV32)) { return false; } -- 2.53.0 From: Chengbo Gao <gaochengbo@bosc.ac.cn> PCI bus numbers may still be unassigned when QEMU initializes a PCI device's bus-master address space. For devices behind bridges, pci_bus_num() can return 0 at that point because the guest has not yet programmed the bridge Secondary Bus Number register. The RISC-V IOMMU currently stores a fixed device_id in RISCVIOMMUSpace when the address space is created. If the guest later enumerates the device on a non-zero bus, DMA translation still uses the stale device_id and may look up the wrong device context in the DDT. Store the stable PCIBus pointer and devfn in RISCVIOMMUSpace instead, and compute the device_id from the current bus number when it is needed. This keeps DMA translation and ATS invalidation in sync with guest PCI bus enumeration. Signed-off-by: Chengbo Gao <gaochengbo@bosc.ac.cn> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260514020637.2819308-1-gaochengbo@bosc.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu.c | 40 +++++++++++++++++++++++++--------------- 1 file changed, 25 insertions(+), 15 deletions(-) diff --git a/hw/riscv/riscv-iommu.c b/hw/riscv/riscv-iommu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.c +++ b/hw/riscv/riscv-iommu.c @@ -XXX,XX +XXX,XX @@ struct RISCVIOMMUSpace { IOMMUMemoryRegion iova_mr; /* IOVA memory region for attached device */ AddressSpace iova_as; /* IOVA address space for attached device */ RISCVIOMMUState *iommu; /* Managing IOMMU device state */ - uint32_t devid; /* Requester identifier, AKA device_id */ + PCIBus *bus; /* PCI bus of the requester */ + uint8_t devfn; /* Requester identifier, AKA device_id */ bool notifier; /* IOMMU unmap notifier enabled */ QLIST_ENTRY(RISCVIOMMUSpace) list; }; @@ -XXX,XX +XXX,XX @@ struct RISCVIOMMUEntry { /* IOMMU index for transactions without process_id specified. */ #define RISCV_IOMMU_NOPROCID 0 +static uint32_t riscv_iommu_space_devid(RISCVIOMMUSpace *as) +{ + uint32_t devid = PCI_BUILD_BDF(pci_bus_num(as->bus), as->devfn); + + /* FIXME: PCIe bus remapping for attached endpoints. */ + devid |= as->iommu->bus << 8; + return devid; +} + static uint8_t riscv_iommu_get_icvec_vector(uint32_t icvec, uint32_t vec_type) { switch (vec_type) { @@ -XXX,XX +XXX,XX @@ static void riscv_iommu_ctx_put(RISCVIOMMUState *s, void *ref) } /* Find or allocate address space for a given device */ -static AddressSpace *riscv_iommu_space(RISCVIOMMUState *s, uint32_t devid) +static AddressSpace *riscv_iommu_space(RISCVIOMMUState *s, PCIBus *bus, + int devfn) { RISCVIOMMUSpace *as; - /* FIXME: PCIe bus remapping for attached endpoints. */ - devid |= s->bus << 8; - QLIST_FOREACH(as, &s->spaces, list) { - if (as->devid == devid) { + if (as->bus == bus && as->devfn == devfn) { break; } } @@ -XXX,XX +XXX,XX @@ static AddressSpace *riscv_iommu_space(RISCVIOMMUState *s, uint32_t devid) as = g_new0(RISCVIOMMUSpace, 1); as->iommu = s; - as->devid = devid; + as->bus = bus; + as->devfn = devfn; snprintf(name, sizeof(name), "riscv-iommu-%04x:%02x.%d-iova", - PCI_BUS_NUM(as->devid), PCI_SLOT(as->devid), PCI_FUNC(as->devid)); + pci_bus_num(bus), PCI_SLOT(devfn), PCI_FUNC(devfn)); /* IOVA address space, untranslated addresses */ memory_region_init_iommu(&as->iova_mr, sizeof(as->iova_mr), @@ -XXX,XX +XXX,XX @@ static AddressSpace *riscv_iommu_space(RISCVIOMMUState *s, uint32_t devid) QLIST_INSERT_HEAD(&s->spaces, as, list); - trace_riscv_iommu_new(s->parent_obj.id, PCI_BUS_NUM(as->devid), - PCI_SLOT(as->devid), PCI_FUNC(as->devid)); + trace_riscv_iommu_new(s->parent_obj.id, pci_bus_num(bus), + PCI_SLOT(devfn), PCI_FUNC(devfn)); } return &as->iova_as; } @@ -XXX,XX +XXX,XX @@ static void riscv_iommu_ats(RISCVIOMMUState *s, pid = get_field(cmd->dword0, RISCV_IOMMU_CMD_ATS_PID); QLIST_FOREACH(as, &s->spaces, list) { - if (as->devid == devid) { + if (riscv_iommu_space_devid(as) == devid) { break; } } @@ -XXX,XX +XXX,XX @@ static IOMMUTLBEntry riscv_iommu_memory_region_translate( .addr_mask = ~0ULL, .perm = flag, }; + uint32_t devid = riscv_iommu_space_devid(as); - ctx = riscv_iommu_ctx(as->iommu, as->devid, iommu_idx, &ref); + ctx = riscv_iommu_ctx(as->iommu, devid, iommu_idx, &ref); if (ctx == NULL) { /* Translation disabled or invalid. */ iotlb.addr_mask = 0; @@ -XXX,XX +XXX,XX @@ static IOMMUTLBEntry riscv_iommu_memory_region_translate( } /* Trace all dma translations with original access flags. */ - trace_riscv_iommu_dma(as->iommu->parent_obj.id, PCI_BUS_NUM(as->devid), - PCI_SLOT(as->devid), PCI_FUNC(as->devid), iommu_idx, + trace_riscv_iommu_dma(as->iommu->parent_obj.id, PCI_BUS_NUM(devid), + PCI_SLOT(devid), PCI_FUNC(devid), iommu_idx, IOMMU_FLAG_STR[flag & IOMMU_RW], iotlb.iova, iotlb.translated_addr); @@ -XXX,XX +XXX,XX @@ static AddressSpace *riscv_iommu_find_as(PCIBus *bus, void *opaque, int devfn) /* Find first matching IOMMU */ while (s != NULL && as == NULL) { - as = riscv_iommu_space(s, PCI_BUILD_BDF(pci_bus_num(bus), devfn)); + as = riscv_iommu_space(s, bus, devfn); s = s->iommus.le_next; } -- 2.53.0 From: Guenter Roeck <linux@roeck-us.net> Minimal clock register configuration required to boot Linux without backtraces in the clock code. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260514-reference-overhand-749149e36a88@spud> [ Changes by AF: - Fixup checkpatch errors ] Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/misc/mchp_pfsoc_ioscb.h | 2 ++ hw/misc/mchp_pfsoc_ioscb.c | 47 +++++++++++++++++++++++++++++- hw/misc/mchp_pfsoc_sysreg.c | 13 +++++++++ 3 files changed, 61 insertions(+), 1 deletion(-) diff --git a/include/hw/misc/mchp_pfsoc_ioscb.h b/include/hw/misc/mchp_pfsoc_ioscb.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/mchp_pfsoc_ioscb.h +++ b/include/hw/misc/mchp_pfsoc_ioscb.h @@ -XXX,XX +XXX,XX @@ typedef struct MchpPfSoCIoscbState { MemoryRegion mailbox; MemoryRegion cfg; MemoryRegion ccc; + MemoryRegion pll_nw_0; + MemoryRegion pll_nw_1; MemoryRegion pll_mss; MemoryRegion cfm_mss; MemoryRegion pll_ddr; diff --git a/hw/misc/mchp_pfsoc_ioscb.c b/hw/misc/mchp_pfsoc_ioscb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/mchp_pfsoc_ioscb.c +++ b/hw/misc/mchp_pfsoc_ioscb.c @@ -XXX,XX +XXX,XX @@ #define IOSCB_MAILBOX_BASE 0x07020800 #define IOSCB_CFG_BASE 0x07080000 #define IOSCB_CCC_BASE 0x08000000 +#define IOSCB_PLL_NW0_BASE 0x08100000 +#define IOSCB_PLL_NW1_BASE 0x08200000 #define IOSCB_PLL_MSS_BASE 0x0E001000 #define IOSCB_CFM_MSS_BASE 0x0E002000 #define IOSCB_PLL_DDR_BASE 0x0E010000 @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps mchp_pfsoc_dummy_ops = { /* All PLL modules in IOSCB have the same register layout */ #define PLL_CTRL 0x04 +#define PLL_REF_FB 0x08 +#define PLL_DIV_0_1 0x10 +#define PLL_DIV_2_3 0x14 +#define PLL_CTRL2 0x18 +#define PLL_CAL 0x1c +#define PLL_PHADJ 0x20 +#define SSCG_REG_0 0x24 +#define SSCG_REG_1 0x28 +#define SSCG_REG_2 0x2c +#define SSCG_REG_3 0x30 static uint64_t mchp_pfsoc_pll_read(void *opaque, hwaddr offset, unsigned size) @@ -XXX,XX +XXX,XX @@ static uint64_t mchp_pfsoc_pll_read(void *opaque, hwaddr offset, /* PLL is locked */ val = BIT(25); break; + case PLL_DIV_0_1: + case PLL_DIV_2_3: + val = 0x01000100; /* return valid post divider values */ + break; + case PLL_CTRL2: + val = 0x00001110; + break; + case PLL_REF_FB: + val = 0x00000100; /* RFDIV := 1 */ + break; + case SSCG_REG_2: + val = 0x00000001; /* INTIN := 1 */ + break; + case PLL_PHADJ: + val = 0x00000401; + break; default: qemu_log_mask(LOG_UNIMP, "%s: unimplemented device read " "(size %d, offset 0x%" HWADDR_PRIx ")\n", @@ -XXX,XX +XXX,XX @@ static uint64_t mchp_pfsoc_pll_read(void *opaque, hwaddr offset, return val; } +static void mchp_pfsoc_pll_write(void *opaque, hwaddr offset, + uint64_t value, unsigned size) +{ + qemu_log_mask(LOG_UNIMP, "%s: unimplemented device write " + "(size %d, value 0x%" PRIx64 + ", offset 0x%" HWADDR_PRIx ")\n", + __func__, size, value, offset); +} + static const MemoryRegionOps mchp_pfsoc_pll_ops = { .read = mchp_pfsoc_pll_read, - .write = mchp_pfsoc_dummy_write, + .write = mchp_pfsoc_pll_write, .endianness = DEVICE_LITTLE_ENDIAN, }; @@ -XXX,XX +XXX,XX @@ static void mchp_pfsoc_ioscb_realize(DeviceState *dev, Error **errp) "mchp.pfsoc.ioscb.ccc", IOSCB_CCC_REG_SIZE); memory_region_add_subregion(&s->container, IOSCB_CCC_BASE, &s->ccc); + memory_region_init_io(&s->pll_nw_0, OBJECT(s), &mchp_pfsoc_pll_ops, s, + "mchp.pfsoc.ioscb.pll_nw_0", IOSCB_SUBMOD_REG_SIZE); + memory_region_add_subregion(&s->container, IOSCB_PLL_NW0_BASE, &s->pll_nw_0); + + memory_region_init_io(&s->pll_nw_1, OBJECT(s), &mchp_pfsoc_pll_ops, s, + "mchp.pfsoc.ioscb.pll_nw_1", IOSCB_SUBMOD_REG_SIZE); + memory_region_add_subregion(&s->container, IOSCB_PLL_NW1_BASE, &s->pll_nw_1); + memory_region_init_io(&s->pll_mss, OBJECT(s), &mchp_pfsoc_pll_ops, s, "mchp.pfsoc.ioscb.pll_mss", IOSCB_SUBMOD_REG_SIZE); memory_region_add_subregion(&s->container, IOSCB_PLL_MSS_BASE, &s->pll_mss); diff --git a/hw/misc/mchp_pfsoc_sysreg.c b/hw/misc/mchp_pfsoc_sysreg.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/mchp_pfsoc_sysreg.c +++ b/hw/misc/mchp_pfsoc_sysreg.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/mchp_pfsoc_sysreg.h" #include "system/runstate.h" +#define CLOCK_CONFIG_CR 0x8 +#define RTC_CLOCK_CR 0xc #define MSS_RESET_CR 0x18 #define ENVM_CR 0xb8 #define MESSAGE_INT 0x118c @@ -XXX,XX +XXX,XX @@ static uint64_t mchp_pfsoc_sysreg_read(void *opaque, hwaddr offset, uint32_t val = 0; switch (offset) { + case CLOCK_CONFIG_CR: + /* Icicle kit reference design cpu/axi/ahb divider setting */ + val = 0x24; + break; + case RTC_CLOCK_CR: + /* + * Bit 16 enables the RTC clock, 0x7d is the required divider + * setting for a 125 MHz reference. + */ + val = BIT(16) | 0x7d; + break; case ENVM_CR: /* Indicate the eNVM is running at the configured divider rate */ val = BIT(6); -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> The entry was missing from isa_edata_arr[]. Fixes: 32bbab666 ("target/riscv: add draft RISC-V Zbr ext as xbr0p93") Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-2-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(svrsw60t59b, PRIV_VERSION_1_13_0, ext_svrsw60t59b), ISA_EXT_DATA_ENTRY(svukte, PRIV_VERSION_1_13_0, ext_svukte), ISA_EXT_DATA_ENTRY(svvptc, PRIV_VERSION_1_13_0, ext_svvptc), + ISA_EXT_DATA_ENTRY(xlrbr, PRIV_VERSION_1_13_0, ext_xlrbr), ISA_EXT_DATA_ENTRY(xmipscbop, PRIV_VERSION_1_12_0, ext_xmipscbop), ISA_EXT_DATA_ENTRY(xmipscmov, PRIV_VERSION_1_12_0, ext_xmipscmov), ISA_EXT_DATA_ENTRY(xmipslsp, PRIV_VERSION_1_12_0, ext_xmipslsp), -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Noticed when realizing that 'svadu' was too far apart from 'svade'. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-3-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(smcdeleg, PRIV_VERSION_1_13_0, ext_smcdeleg), ISA_EXT_DATA_ENTRY(smcntrpmf, PRIV_VERSION_1_12_0, ext_smcntrpmf), ISA_EXT_DATA_ENTRY(smcsrind, PRIV_VERSION_1_13_0, ext_smcsrind), + ISA_EXT_DATA_ENTRY(smctr, PRIV_VERSION_1_12_0, ext_smctr), ISA_EXT_DATA_ENTRY(smdbltrp, PRIV_VERSION_1_13_0, ext_smdbltrp), ISA_EXT_DATA_ENTRY(smepmp, PRIV_VERSION_1_12_0, ext_smepmp), ISA_EXT_DATA_ENTRY(smpmpmt, PRIV_VERSION_1_12_0, ext_smpmpmt), @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(sscofpmf, PRIV_VERSION_1_12_0, ext_sscofpmf), ISA_EXT_DATA_ENTRY(sscounterenw, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(sscsrind, PRIV_VERSION_1_12_0, ext_sscsrind), + ISA_EXT_DATA_ENTRY(ssctr, PRIV_VERSION_1_12_0, ext_ssctr), ISA_EXT_DATA_ENTRY(ssdbltrp, PRIV_VERSION_1_13_0, ext_ssdbltrp), ISA_EXT_DATA_ENTRY(ssnpm, PRIV_VERSION_1_13_0, ext_ssnpm), ISA_EXT_DATA_ENTRY(sspm, PRIV_VERSION_1_13_0, ext_sspm), @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(ssu64xl, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(supm, PRIV_VERSION_1_13_0, ext_supm), ISA_EXT_DATA_ENTRY(svade, PRIV_VERSION_1_11_0, ext_svade), - ISA_EXT_DATA_ENTRY(smctr, PRIV_VERSION_1_12_0, ext_smctr), - ISA_EXT_DATA_ENTRY(ssctr, PRIV_VERSION_1_12_0, ext_ssctr), ISA_EXT_DATA_ENTRY(svadu, PRIV_VERSION_1_12_0, ext_svadu), ISA_EXT_DATA_ENTRY(svinval, PRIV_VERSION_1_12_0, ext_svinval), ISA_EXT_DATA_ENTRY(svnapot, PRIV_VERSION_1_12_0, ext_svnapot), -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> We want to reduce the usage of the riscv_cpu_* arrays in target/riscv/cpu.c, centering everything in isa_edata_arr[] instead, to reduce data duplication and make our lives a bit easier when adding new extensions. To do that we'll have to make isa_edata_arr[] do what the other arrays are currently doing, not breaking existing semantics in the process. The riscv_cpu_* arrays have a few exclusive uses: - set default extensions for rv32 and rv64; - create user CPU properties; - misc uses around tcg-cpu.c and kvm-cpu.c. We'll slowly make isa_edata_arr[] supersede these arrays. Start by adding a new 'prop_name' field in RISCVIsaExtData. This field is needed because not all extensions have properties and not all properties match the riscv,isa string name. Create two additional macros and reclassify existing isa_edata_arr[] entries as follows: - ISA_EXT_DATA_ENTRY creates an entry where prop_name == riscv,isa. Most of our regular extensions fall into this category; - ISA_EXPERIMENTAL_EXT_DATA_ENTRY: same as above but add a "x-" to the prop name, i.e. prop_name == "x-" + riscv,isa; - ISA_INTERNAL_EXT_DATA_ENTRY: used to declared internal extensions. By 'internal' we mean users/management can't set them on or off. With these new macros we can start our simplification by changing riscv-qmp-cmds to use isa_edata_arr[]. We'll just scroll through it once and gather what we need. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-4-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 1 + target/riscv/cpu.c | 60 +++++++++++++++++++++++------------ target/riscv/riscv-qmp-cmds.c | 30 ++++-------------- 3 files changed, 47 insertions(+), 44 deletions(-) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ extern const RISCVCPUMultiExtConfig riscv_cpu_named_features[]; typedef struct isa_ext_data { const char *name; + const char *prop_name; int min_version; int ext_enable_offset; } RISCVIsaExtData; diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_cfg_merge(RISCVCPUConfig *dest, const RISCVCPUConfig *src) #include "cpu_cfg_fields.h.inc" } +/* Use this for regular user facing extensions */ #define ISA_EXT_DATA_ENTRY(_name, _min_ver, _prop) \ - {#_name, _min_ver, CPU_CFG_OFFSET(_prop)} + {#_name, #_name, _min_ver, CPU_CFG_OFFSET(_prop)} + +/* + * Same as above but for experimental extensions. We'll add a + * "x-" right after "_name" when creating the user property. + */ +#define ISA_EXPERIMENTAL_EXT_DATA_ENTRY(_name, _min_ver, _prop) \ + {#_name, "x-" #_name, _min_ver, CPU_CFG_OFFSET(_prop)} + +/* + * Internal extensions are extensions we will declare in the + * riscv,isa DT but they don't have an user property, i.e. + * users/management can't enable/disable them. + */ +#define ISA_INTERNAL_EXT_DATA_ENTRY(_name, _min_ver, _prop) \ + {#_name, NULL, _min_ver, CPU_CFG_OFFSET(_prop)} /* * Here are the ordering rules of extension naming defined by RISC-V @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_cfg_merge(RISCVCPUConfig *dest, const RISCVCPUConfig *src) * instead. */ const RISCVIsaExtData isa_edata_arr[] = { - ISA_EXT_DATA_ENTRY(zic64b, PRIV_VERSION_1_12_0, ext_zic64b), + ISA_INTERNAL_EXT_DATA_ENTRY(zic64b, PRIV_VERSION_1_12_0, ext_zic64b), ISA_EXT_DATA_ENTRY(zicbom, PRIV_VERSION_1_12_0, ext_zicbom), ISA_EXT_DATA_ENTRY(zicbop, PRIV_VERSION_1_12_0, ext_zicbop), ISA_EXT_DATA_ENTRY(zicboz, PRIV_VERSION_1_12_0, ext_zicboz), - ISA_EXT_DATA_ENTRY(ziccamoa, PRIV_VERSION_1_11_0, has_priv_1_11), - ISA_EXT_DATA_ENTRY(ziccif, PRIV_VERSION_1_11_0, has_priv_1_11), - ISA_EXT_DATA_ENTRY(zicclsm, PRIV_VERSION_1_11_0, has_priv_1_11), + ISA_INTERNAL_EXT_DATA_ENTRY(ziccamoa, PRIV_VERSION_1_11_0, has_priv_1_11), + ISA_INTERNAL_EXT_DATA_ENTRY(ziccif, PRIV_VERSION_1_11_0, has_priv_1_11), + ISA_INTERNAL_EXT_DATA_ENTRY(zicclsm, PRIV_VERSION_1_11_0, has_priv_1_11), ISA_EXT_DATA_ENTRY(ziccrse, PRIV_VERSION_1_11_0, ext_ziccrse), ISA_EXT_DATA_ENTRY(zicfilp, PRIV_VERSION_1_12_0, ext_zicfilp), ISA_EXT_DATA_ENTRY(zicfiss, PRIV_VERSION_1_13_0, ext_zicfiss), @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(zilsd, PRIV_VERSION_1_12_0, ext_zilsd), ISA_EXT_DATA_ENTRY(zimop, PRIV_VERSION_1_13_0, ext_zimop), ISA_EXT_DATA_ENTRY(zmmul, PRIV_VERSION_1_12_0, ext_zmmul), - ISA_EXT_DATA_ENTRY(za64rs, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(za64rs, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(zaamo, PRIV_VERSION_1_12_0, ext_zaamo), ISA_EXT_DATA_ENTRY(zabha, PRIV_VERSION_1_13_0, ext_zabha), ISA_EXT_DATA_ENTRY(zacas, PRIV_VERSION_1_12_0, ext_zacas), @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(zhinx, PRIV_VERSION_1_12_0, ext_zhinx), ISA_EXT_DATA_ENTRY(zhinxmin, PRIV_VERSION_1_12_0, ext_zhinxmin), ISA_EXT_DATA_ENTRY(sdtrig, PRIV_VERSION_1_12_0, debug), - ISA_EXT_DATA_ENTRY(shcounterenw, PRIV_VERSION_1_12_0, has_priv_1_12), - ISA_EXT_DATA_ENTRY(sha, PRIV_VERSION_1_12_0, ext_sha), - ISA_EXT_DATA_ENTRY(shgatpa, PRIV_VERSION_1_12_0, has_priv_1_12), - ISA_EXT_DATA_ENTRY(shtvala, PRIV_VERSION_1_12_0, has_priv_1_12), - ISA_EXT_DATA_ENTRY(shvsatpa, PRIV_VERSION_1_12_0, has_priv_1_12), - ISA_EXT_DATA_ENTRY(shvstvala, PRIV_VERSION_1_12_0, has_priv_1_12), - ISA_EXT_DATA_ENTRY(shvstvecd, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(shcounterenw, PRIV_VERSION_1_12_0, + has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(sha, PRIV_VERSION_1_12_0, ext_sha), + ISA_INTERNAL_EXT_DATA_ENTRY(shgatpa, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(shtvala, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(shvsatpa, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(shvstvala, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(shvstvecd, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(smaia, PRIV_VERSION_1_12_0, ext_smaia), ISA_EXT_DATA_ENTRY(smcdeleg, PRIV_VERSION_1_13_0, ext_smcdeleg), ISA_EXT_DATA_ENTRY(smcntrpmf, PRIV_VERSION_1_12_0, ext_smcntrpmf), @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(smstateen, PRIV_VERSION_1_12_0, ext_smstateen), ISA_EXT_DATA_ENTRY(ssaia, PRIV_VERSION_1_12_0, ext_ssaia), ISA_EXT_DATA_ENTRY(ssccfg, PRIV_VERSION_1_13_0, ext_ssccfg), - ISA_EXT_DATA_ENTRY(ssccptr, PRIV_VERSION_1_11_0, has_priv_1_11), + ISA_INTERNAL_EXT_DATA_ENTRY(ssccptr, PRIV_VERSION_1_11_0, has_priv_1_11), ISA_EXT_DATA_ENTRY(sscofpmf, PRIV_VERSION_1_12_0, ext_sscofpmf), - ISA_EXT_DATA_ENTRY(sscounterenw, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(sscounterenw, PRIV_VERSION_1_12_0, + has_priv_1_12), ISA_EXT_DATA_ENTRY(sscsrind, PRIV_VERSION_1_12_0, ext_sscsrind), ISA_EXT_DATA_ENTRY(ssctr, PRIV_VERSION_1_12_0, ext_ssctr), ISA_EXT_DATA_ENTRY(ssdbltrp, PRIV_VERSION_1_13_0, ext_ssdbltrp), ISA_EXT_DATA_ENTRY(ssnpm, PRIV_VERSION_1_13_0, ext_ssnpm), ISA_EXT_DATA_ENTRY(sspm, PRIV_VERSION_1_13_0, ext_sspm), - ISA_EXT_DATA_ENTRY(ssstateen, PRIV_VERSION_1_12_0, ext_ssstateen), - ISA_EXT_DATA_ENTRY(ssstrict, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(ssstateen, PRIV_VERSION_1_12_0, ext_ssstateen), + ISA_INTERNAL_EXT_DATA_ENTRY(ssstrict, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(sstc, PRIV_VERSION_1_12_0, ext_sstc), - ISA_EXT_DATA_ENTRY(sstvala, PRIV_VERSION_1_12_0, has_priv_1_12), - ISA_EXT_DATA_ENTRY(sstvecd, PRIV_VERSION_1_12_0, has_priv_1_12), - ISA_EXT_DATA_ENTRY(ssu64xl, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(sstvala, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(sstvecd, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(ssu64xl, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(supm, PRIV_VERSION_1_13_0, ext_supm), ISA_EXT_DATA_ENTRY(svade, PRIV_VERSION_1_11_0, ext_svade), ISA_EXT_DATA_ENTRY(svadu, PRIV_VERSION_1_12_0, ext_svadu), @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(svnapot, PRIV_VERSION_1_12_0, ext_svnapot), ISA_EXT_DATA_ENTRY(svpbmt, PRIV_VERSION_1_12_0, ext_svpbmt), ISA_EXT_DATA_ENTRY(svrsw60t59b, PRIV_VERSION_1_13_0, ext_svrsw60t59b), - ISA_EXT_DATA_ENTRY(svukte, PRIV_VERSION_1_13_0, ext_svukte), + ISA_EXPERIMENTAL_EXT_DATA_ENTRY(svukte, PRIV_VERSION_1_13_0, ext_svukte), ISA_EXT_DATA_ENTRY(svvptc, PRIV_VERSION_1_13_0, ext_svvptc), ISA_EXT_DATA_ENTRY(xlrbr, PRIV_VERSION_1_13_0, ext_xlrbr), ISA_EXT_DATA_ENTRY(xmipscbop, PRIV_VERSION_1_12_0, ext_xmipscbop), diff --git a/target/riscv/riscv-qmp-cmds.c b/target/riscv/riscv-qmp-cmds.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/riscv-qmp-cmds.c +++ b/target/riscv/riscv-qmp-cmds.c @@ -XXX,XX +XXX,XX @@ static void riscv_obj_add_qdict_prop(Object *obj, QDict *qdict_out, } } -static void riscv_obj_add_multiext_props(Object *obj, QDict *qdict_out, - const RISCVCPUMultiExtConfig *arr) +static void riscv_obj_add_multiext_props(Object *obj, QDict *qdict_out) { - for (int i = 0; arr[i].name != NULL; i++) { - riscv_obj_add_qdict_prop(obj, qdict_out, arr[i].name); - } -} + const RISCVIsaExtData *edata; -static void riscv_obj_add_named_feats_qdict(Object *obj, QDict *qdict_out) -{ - const RISCVCPUMultiExtConfig *named_cfg; - RISCVCPU *cpu = RISCV_CPU(obj); - QObject *value; - bool flag_val; - - for (int i = 0; riscv_cpu_named_features[i].name != NULL; i++) { - named_cfg = &riscv_cpu_named_features[i]; - flag_val = isa_ext_is_enabled(cpu, named_cfg->offset); - value = QOBJECT(qbool_from_bool(flag_val)); - - qdict_put_obj(qdict_out, named_cfg->name, value); + for (edata = isa_edata_arr; edata && edata->name; edata++) { + if (edata->prop_name) { + riscv_obj_add_qdict_prop(obj, qdict_out, edata->prop_name); + } } } @@ -XXX,XX +XXX,XX @@ CpuModelExpansionInfo *qmp_query_cpu_model_expansion(CpuModelExpansionType type, qdict_out = qdict_new(); - riscv_obj_add_multiext_props(obj, qdict_out, riscv_cpu_extensions); - riscv_obj_add_multiext_props(obj, qdict_out, riscv_cpu_experimental_exts); - riscv_obj_add_multiext_props(obj, qdict_out, riscv_cpu_vendor_exts); - riscv_obj_add_named_feats_qdict(obj, qdict_out); + riscv_obj_add_multiext_props(obj, qdict_out); riscv_obj_add_profiles_qdict(obj, qdict_out); /* Add our CPU boolean options too */ -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Commit 7e4f75cadf ("target/riscv/tcg: hide warn for named feats when disabling via priv_ver") changed the design of disable_priv_spec_isa_exts to not warn when disabling what we were calling "named features" at that time. Back in that time we were adding RVA22 profile support and we were dealing with a RVI innovation: named features. These can be define as cute names for pre-existing behavior/parameters, e.g. 'zic64b' means all cache blocks must have 64 bytes. They do get inserted in the riscv,isa but they are not "real" extensions because users shouldn't be setting them in the command line, or so we thought back then, and we attempted to model that by calling it "named features". This didn't age that well: ziccrse is a so called named feature as far as TCG goes, but then KVM had to treat it as a regular extension that can be user set and we made an exception: ziccrse is a named feature that is user set by KVM. "Named features" are regular extensions that might or might not be user set, and might or might not warrant special handling during realize() by setting other parameters. And we'll being treating them as such, which will culminate in the end of riscv_cpu_named_features[] array in the end. This reverts commit 7e4f75cadf44ee67809c7ca82645a289a5268966. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-5-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 13 +++---------- 1 file changed, 3 insertions(+), 10 deletions(-) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_disable_priv_spec_isa_exts(RISCVCPU *cpu) } isa_ext_update_enabled(cpu, edata->ext_enable_offset, false); - - /* - * Do not show user warnings for named features that users - * can't enable/disable in the command line. See commit - * 68c9e54bea for more info. - */ - if (cpu_cfg_offset_is_named_feat(edata->ext_enable_offset)) { - continue; - } #ifndef CONFIG_USER_ONLY warn_report("disabling %s extension for hart 0x%" PRIx64 " because privilege spec version does not match", @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_update_named_features(RISCVCPU *cpu) cpu->cfg.has_priv_1_13 = true; } + /* zic64b is 1.12 or later */ cpu->cfg.ext_zic64b = cpu->cfg.cbom_blocksize == 64 && cpu->cfg.cbop_blocksize == 64 && - cpu->cfg.cboz_blocksize == 64; + cpu->cfg.cboz_blocksize == 64 && + cpu->cfg.has_priv_1_12; cpu->cfg.ext_ssstateen = cpu->cfg.ext_smstateen; -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> We're using both isa_edata_arr[] and riscv_cpu_named_features[] to find an extension name based on a cfg offset. This is reminiscent of a past where isa_edata_arr[] didn't include entries for internal extensions. At this point we can use just isa_edata_arr[]. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-6-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static int cpu_cfg_ext_get_min_version(uint32_t ext_offset) static const char *cpu_cfg_ext_get_name(uint32_t ext_offset) { - const RISCVCPUMultiExtConfig *feat; const RISCVIsaExtData *edata; for (edata = isa_edata_arr; edata->name != NULL; edata++) { @@ -XXX,XX +XXX,XX @@ static const char *cpu_cfg_ext_get_name(uint32_t ext_offset) } } - for (feat = riscv_cpu_named_features; feat->name != NULL; feat++) { - if (feat->offset == ext_offset) { - return feat->name; - } - } - g_assert_not_reached(); } -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Deprecate riscv_cpu_enable_named_feat() by creating implied rules for 'sha' and 'ssstateen'. 'zic64' is always true given that our default block size is set to 64. With this change we homogeneize extension handling when enabling profiles. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-7-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 25 ++++++++++++++++++++++-- target/riscv/tcg/tcg-cpu.c | 40 -------------------------------------- 2 files changed, 23 insertions(+), 42 deletions(-) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static RISCVCPUImpliedExtsRule ZVKSG_IMPLIED = { }, }; +static RISCVCPUImpliedExtsRule SHA_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_sha), + .implied_misa_exts = RVH, + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_smstateen), + CPU_CFG_OFFSET(ext_ssstateen), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + static RISCVCPUImpliedExtsRule SSCFG_IMPLIED = { .ext = CPU_CFG_OFFSET(ext_ssccfg), .implied_multi_exts = { @@ -XXX,XX +XXX,XX @@ static RISCVCPUImpliedExtsRule SSCTR_IMPLIED = { }, }; +static RISCVCPUImpliedExtsRule SSSTATEEN_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_ssstateen), + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_smstateen), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + static RISCVCPUImpliedExtsRule ZVFBFA_IMPLIED = { .ext = CPU_CFG_OFFSET(ext_zvfbfa), .implied_multi_exts = { @@ -XXX,XX +XXX,XX @@ RISCVCPUImpliedExtsRule *riscv_multi_ext_implied_rules[] = { &ZVFBFA_IMPLIED, &ZVFBFMIN_IMPLIED, &ZVFBFWMA_IMPLIED, &ZVFH_IMPLIED, &ZVFHMIN_IMPLIED, &ZVKN_IMPLIED, &ZVKNC_IMPLIED, &ZVKNG_IMPLIED, &ZVKNHB_IMPLIED, - &ZVKS_IMPLIED, &ZVKSC_IMPLIED, &ZVKSG_IMPLIED, &SSCFG_IMPLIED, - &SUPM_IMPLIED, &SSPM_IMPLIED, &SMCTR_IMPLIED, &SSCTR_IMPLIED, + &ZVKS_IMPLIED, &ZVKSC_IMPLIED, &ZVKSG_IMPLIED, &SHA_IMPLIED, + &SSCFG_IMPLIED, &SUPM_IMPLIED, &SSPM_IMPLIED, &SMCTR_IMPLIED, + &SSCTR_IMPLIED, &SSSTATEEN_IMPLIED, NULL }; diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static const char *cpu_cfg_ext_get_name(uint32_t ext_offset) g_assert_not_reached(); } -static bool cpu_cfg_offset_is_named_feat(uint32_t ext_offset) -{ - const RISCVCPUMultiExtConfig *feat; - - for (feat = riscv_cpu_named_features; feat->name != NULL; feat++) { - if (feat->offset == ext_offset) { - return true; - } - } - - return false; -} - -static void riscv_cpu_enable_named_feat(RISCVCPU *cpu, uint32_t feat_offset) -{ - /* - * All other named features are already enabled - * in riscv_tcg_cpu_instance_init(). - */ - switch (feat_offset) { - case CPU_CFG_OFFSET(ext_zic64b): - cpu->cfg.cbom_blocksize = 64; - cpu->cfg.cbop_blocksize = 64; - cpu->cfg.cboz_blocksize = 64; - break; - case CPU_CFG_OFFSET(ext_sha): - if (!cpu_misa_ext_is_user_set(RVH)) { - riscv_cpu_write_misa_bit(cpu, RVH, true); - } - /* fallthrough */ - case CPU_CFG_OFFSET(ext_ssstateen): - cpu->cfg.ext_smstateen = true; - break; - } -} - static void cpu_bump_multi_ext_priv_ver(CPURISCVState *env, uint32_t ext_offset) { @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_set_profile(RISCVCPU *cpu, ext_offset = profile->ext_offsets[i]; if (profile->enabled) { - if (cpu_cfg_offset_is_named_feat(ext_offset)) { - riscv_cpu_enable_named_feat(cpu, ext_offset); - } - cpu_bump_multi_ext_priv_ver(&cpu->env, ext_offset); } -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> This array has no uses left. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-8-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 1 - target/riscv/cpu.c | 26 -------------------------- target/riscv/tcg/tcg-cpu.c | 4 ++-- 3 files changed, 2 insertions(+), 29 deletions(-) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct RISCVCPUMultiExtConfig { extern const RISCVCPUMultiExtConfig riscv_cpu_extensions[]; extern const RISCVCPUMultiExtConfig riscv_cpu_vendor_exts[]; extern const RISCVCPUMultiExtConfig riscv_cpu_experimental_exts[]; -extern const RISCVCPUMultiExtConfig riscv_cpu_named_features[]; typedef struct isa_ext_data { const char *name; diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const RISCVCPUMultiExtConfig riscv_cpu_experimental_exts[] = { { }, }; -/* - * 'Named features' is the name we give to extensions that we - * don't want to expose to users. They are either immutable - * (always enabled/disable) or they'll vary depending on - * the resulting CPU state. - * - * Some of them are always enabled depending on priv version - * of the CPU and are declared directly in isa_edata_arr[]. - * The ones listed here have special checks during finalize() - * time and require their own flags like regular extensions. - * See riscv_cpu_update_named_features() for more info. - */ -const RISCVCPUMultiExtConfig riscv_cpu_named_features[] = { - MULTI_EXT_CFG_BOOL("zic64b", ext_zic64b, true), - MULTI_EXT_CFG_BOOL("ssstateen", ext_ssstateen, true), - MULTI_EXT_CFG_BOOL("sha", ext_sha, true), - - /* - * 'ziccrse' has its own flag because the KVM driver - * wants to enable/disable it on its own accord. - */ - MULTI_EXT_CFG_BOOL("ziccrse", ext_ziccrse, true), - - { }, -}; - static void cpu_set_prop_err(RISCVCPU *cpu, const char *propname, Error **errp) { diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_disable_priv_spec_isa_exts(RISCVCPU *cpu) } } -static void riscv_cpu_update_named_features(RISCVCPU *cpu) +static void riscv_cpu_update_cfg(RISCVCPU *cpu) { if (cpu->env.priv_ver >= PRIV_VERSION_1_11_0) { cpu->cfg.has_priv_1_11 = true; @@ -XXX,XX +XXX,XX @@ void riscv_tcg_cpu_finalize_features(RISCVCPU *cpu, Error **errp) return; } - riscv_cpu_update_named_features(cpu); + riscv_cpu_update_cfg(cpu); riscv_cpu_validate_profiles(cpu); if (cpu->cfg.ext_smepmp && !cpu->cfg.pmp) { -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> The non-standard extensions, in this particular function the vendor extensions, are all riscv,isa names that starts with 'x'. In theory this is a bit slower than using riscv_cpu_vendor_exts (isa_edata_arr is longer) but riscv_cpu_update_misa_x() is executed only once during finalize(), i.e. not a hot path. We're accepting a tiny performance hit as as a tradeoff for the code simplication we'll have later by removing all riscv_cpu_* arrays. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-9-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_update_misa_c(RISCVCPU *cpu) static void riscv_cpu_update_misa_x(RISCVCPU *cpu) { CPURISCVState *env = &cpu->env; - const RISCVCPUMultiExtConfig *arr = riscv_cpu_vendor_exts; + const RISCVIsaExtData *edata; - for (int i = 0; arr[i].name != NULL; i++) { - if (isa_ext_is_enabled(cpu, arr[i].offset)) { + for (edata = isa_edata_arr; edata && edata->name; edata++) { + if (edata->name[0] == 'x' + && isa_ext_is_enabled(cpu, edata->ext_enable_offset)) { riscv_cpu_set_misa_ext(env, env->misa_ext | RVX); break; } -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Use isa_edata_arr[] directly instead of going through 3 different arrays to populate the unavailable KVM properties. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-10-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/kvm/kvm-cpu.c | 25 ++++++++++--------------- 1 file changed, 10 insertions(+), 15 deletions(-) diff --git a/target/riscv/kvm/kvm-cpu.c b/target/riscv/kvm/kvm-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/kvm/kvm-cpu.c +++ b/target/riscv/kvm/kvm-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_add_kvm_unavail_prop(Object *obj, const char *prop_name) NULL, (void *)prop_name); } -static void riscv_cpu_add_kvm_unavail_prop_array(Object *obj, - const RISCVCPUMultiExtConfig *array) -{ - const RISCVCPUMultiExtConfig *prop; - - g_assert(array); - - for (prop = array; prop && prop->name; prop++) { - riscv_cpu_add_kvm_unavail_prop(obj, prop->name); - } -} - static void kvm_riscv_add_cpu_user_properties(Object *cpu_obj) { + const RISCVIsaExtData *edata; int i; riscv_add_satp_mode_properties(cpu_obj); @@ -XXX,XX +XXX,XX @@ static void kvm_riscv_add_cpu_user_properties(Object *cpu_obj) NULL, multi_cfg); } - riscv_cpu_add_kvm_unavail_prop_array(cpu_obj, riscv_cpu_extensions); - riscv_cpu_add_kvm_unavail_prop_array(cpu_obj, riscv_cpu_vendor_exts); - riscv_cpu_add_kvm_unavail_prop_array(cpu_obj, riscv_cpu_experimental_exts); + /* + * Mark all isa_edata_arr properties that collides with + * a KVM property as unavailable. + */ + for (edata = isa_edata_arr; edata && edata->name; edata++) { + if (edata->prop_name) { + riscv_cpu_add_kvm_unavail_prop(cpu_obj, edata->prop_name); + } + } /* We don't have the needed KVM support for profiles */ for (i = 0; riscv_profiles[i] != NULL; i++) { -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Use isa_edata_arr[] to enable all feasible extensions. Filter experimental and vendor extensions by checking if the riscv,isa or the prop name starts with 'x'. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-11-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_init_max_cpu_extensions(Object *obj) { RISCVCPU *cpu = RISCV_CPU(obj); CPURISCVState *env = &cpu->env; - const RISCVCPUMultiExtConfig *prop; + const RISCVIsaExtData *edata; /* Enable RVG and RVV that are disabled by default */ riscv_cpu_set_misa_ext(env, env->misa_ext | RVB | RVG | RVV); - for (prop = riscv_cpu_extensions; prop && prop->name; prop++) { - isa_ext_update_enabled(cpu, prop->offset, true); + for (edata = isa_edata_arr; edata && edata->name; edata++) { + if (edata->name[0] == 'x' + || (edata->prop_name && edata->prop_name[0] == 'x')) { + continue; + } + + isa_ext_update_enabled(cpu, edata->ext_enable_offset, true); } /* -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> The cpu_get_multi_ext_cfg/cpu_set_multi_ext_cfg callbacks are using a RISCVCPUMultiExtConfig pointer as opaque, but internally we're just using multi_ext_cfg->offset. Use multi_ext_cfg->offset as opaque instead. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-12-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_add_profiles(Object *cpu_obj) static void cpu_set_multi_ext_cfg(Object *obj, Visitor *v, const char *name, void *opaque, Error **errp) { - const RISCVCPUMultiExtConfig *multi_ext_cfg = opaque; RISCVCPU *cpu = RISCV_CPU(obj); + uint32_t cfg_offset = *(uint32_t *)opaque; bool vendor_cpu = riscv_cpu_is_vendor(obj); bool prev_val, value; @@ -XXX,XX +XXX,XX @@ static void cpu_set_multi_ext_cfg(Object *obj, Visitor *v, const char *name, return; } - cpu_cfg_ext_add_user_opt(multi_ext_cfg->offset, value); + cpu_cfg_ext_add_user_opt(cfg_offset, value); - prev_val = isa_ext_is_enabled(cpu, multi_ext_cfg->offset); + prev_val = isa_ext_is_enabled(cpu, cfg_offset); if (value == prev_val) { return; @@ -XXX,XX +XXX,XX @@ static void cpu_set_multi_ext_cfg(Object *obj, Visitor *v, const char *name, } if (value) { - cpu_bump_multi_ext_priv_ver(&cpu->env, multi_ext_cfg->offset); + cpu_bump_multi_ext_priv_ver(&cpu->env, cfg_offset); } - isa_ext_update_enabled(cpu, multi_ext_cfg->offset, value); + isa_ext_update_enabled(cpu, cfg_offset, value); } static void cpu_get_multi_ext_cfg(Object *obj, Visitor *v, const char *name, void *opaque, Error **errp) { - const RISCVCPUMultiExtConfig *multi_ext_cfg = opaque; - bool value = isa_ext_is_enabled(RISCV_CPU(obj), multi_ext_cfg->offset); + uint32_t cfg_offset = *(uint32_t *)opaque; + bool value = isa_ext_is_enabled(RISCV_CPU(obj), cfg_offset); visit_type_bool(v, name, &value, errp); } @@ -XXX,XX +XXX,XX @@ static void cpu_add_multi_ext_prop(Object *cpu_obj, object_property_add(cpu_obj, multi_cfg->name, "bool", cpu_get_multi_ext_cfg, cpu_set_multi_ext_cfg, - NULL, (void *)multi_cfg); + NULL, (void *)&multi_cfg->offset); if (!generic_cpu) { return; -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Do not rely on riscv_cpu_* arrays to set rv32/rv64 CPU defaults - add them to the CPU definition like we do with all other CPUs (aside from 'max'). Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-13-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 40 ++++++++++++++++++++++++++++++++++++++ target/riscv/tcg/tcg-cpu.c | 14 ------------- 2 files changed, 40 insertions(+), 14 deletions(-) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static const TypeInfo riscv_cpu_type_infos[] = { DEFINE_RISCV_CPU(TYPE_RISCV_CPU_BASE32, TYPE_RISCV_DYNAMIC_CPU, .cfg.max_satp_mode = VM_1_10_SV32, .misa_mxl_max = MXL_RV32, + + /* Default extensions as of QEMU 11.1. */ + .cfg.ext_zicbom = true, + .cfg.ext_zicbop = true, + .cfg.ext_zicboz = true, + .cfg.ext_zicntr = true, + .cfg.ext_zicsr = true, + .cfg.ext_zifencei = true, + .cfg.ext_zihintntl = true, + .cfg.ext_zihintpause = true, + .cfg.ext_zihpm = true, + .cfg.ext_zawrs = true, + .cfg.ext_zfa = true, + .cfg.ext_zba = true, + .cfg.ext_zbb = true, + .cfg.ext_zbc = true, + .cfg.ext_zbs = true, + .cfg.ext_sstc = true, + .cfg.ext_svadu = true, + .cfg.ext_svvptc = true, ), DEFINE_RISCV_CPU(TYPE_RISCV_CPU_IBEX, TYPE_RISCV_VENDOR_CPU, @@ -XXX,XX +XXX,XX @@ static const TypeInfo riscv_cpu_type_infos[] = { DEFINE_RISCV_CPU(TYPE_RISCV_CPU_BASE64, TYPE_RISCV_DYNAMIC_CPU, .cfg.max_satp_mode = VM_1_10_SV57, .misa_mxl_max = MXL_RV64, + + /* Default extensions as of QEMU 11.1. */ + .cfg.ext_zicbom = true, + .cfg.ext_zicbop = true, + .cfg.ext_zicboz = true, + .cfg.ext_zicntr = true, + .cfg.ext_zicsr = true, + .cfg.ext_zifencei = true, + .cfg.ext_zihintntl = true, + .cfg.ext_zihintpause = true, + .cfg.ext_zihpm = true, + .cfg.ext_zawrs = true, + .cfg.ext_zfa = true, + .cfg.ext_zba = true, + .cfg.ext_zbb = true, + .cfg.ext_zbc = true, + .cfg.ext_zbs = true, + .cfg.ext_sstc = true, + .cfg.ext_svadu = true, + .cfg.ext_svvptc = true, ), DEFINE_RISCV_CPU(TYPE_RISCV_CPU_SIFIVE_E51, TYPE_RISCV_CPU_SIFIVE_E, diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void cpu_get_multi_ext_cfg(Object *obj, Visitor *v, const char *name, static void cpu_add_multi_ext_prop(Object *cpu_obj, const RISCVCPUMultiExtConfig *multi_cfg) { - bool generic_cpu = riscv_cpu_is_generic(cpu_obj); - object_property_add(cpu_obj, multi_cfg->name, "bool", cpu_get_multi_ext_cfg, cpu_set_multi_ext_cfg, NULL, (void *)&multi_cfg->offset); - - if (!generic_cpu) { - return; - } - - /* - * Set def val directly instead of using - * object_property_set_bool() to save the set() - * callback hash for user inputs. - */ - isa_ext_update_enabled(RISCV_CPU(cpu_obj), multi_cfg->offset, - multi_cfg->enabled); } static void riscv_cpu_add_multiext_prop_array(Object *obj, -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> This change has been done twice now: one in riscv-qmp-cmds, another in the KVM. We're now ready to do it for TCG. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-14-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 34 ++++++++++------------------------ 1 file changed, 10 insertions(+), 24 deletions(-) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void cpu_get_multi_ext_cfg(Object *obj, Visitor *v, const char *name, visit_type_bool(v, name, &value, errp); } -static void cpu_add_multi_ext_prop(Object *cpu_obj, - const RISCVCPUMultiExtConfig *multi_cfg) -{ - object_property_add(cpu_obj, multi_cfg->name, "bool", - cpu_get_multi_ext_cfg, - cpu_set_multi_ext_cfg, - NULL, (void *)&multi_cfg->offset); -} - -static void riscv_cpu_add_multiext_prop_array(Object *obj, - const RISCVCPUMultiExtConfig *array) -{ - const RISCVCPUMultiExtConfig *prop; - - g_assert(array); - - for (prop = array; prop && prop->name; prop++) { - cpu_add_multi_ext_prop(obj, prop); - } -} - /* * Add CPU properties with user-facing flags. * @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_add_multiext_prop_array(Object *obj, */ static void riscv_cpu_add_user_properties(Object *obj) { + const RISCVIsaExtData *edata; + #ifndef CONFIG_USER_ONLY riscv_add_satp_mode_properties(obj); #endif riscv_cpu_add_misa_properties(obj); - riscv_cpu_add_multiext_prop_array(obj, riscv_cpu_extensions); - riscv_cpu_add_multiext_prop_array(obj, riscv_cpu_vendor_exts); - riscv_cpu_add_multiext_prop_array(obj, riscv_cpu_experimental_exts); + for (edata = isa_edata_arr; edata && edata->name; edata++) { + if (edata->prop_name) { + object_property_add(obj, edata->prop_name, "bool", + cpu_get_multi_ext_cfg, + cpu_set_multi_ext_cfg, + NULL, (void *)&edata->ext_enable_offset); + } + } riscv_cpu_add_profiles(obj); } -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> There is no more uses left for these arrays. isa_edata_arr[] is doing everything we need, making our lives a little easier when adding new extensions. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-15-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 10 --- target/riscv/cpu.c | 159 --------------------------------------------- 2 files changed, 169 deletions(-) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ bool isa_ext_is_enabled(RISCVCPU *cpu, uint32_t ext_offset); void riscv_cpu_set_misa_ext(CPURISCVState *env, uint32_t ext); bool riscv_cpu_is_vendor(Object *cpu_obj); -typedef struct RISCVCPUMultiExtConfig { - const char *name; - uint32_t offset; - bool enabled; -} RISCVCPUMultiExtConfig; - -extern const RISCVCPUMultiExtConfig riscv_cpu_extensions[]; -extern const RISCVCPUMultiExtConfig riscv_cpu_vendor_exts[]; -extern const RISCVCPUMultiExtConfig riscv_cpu_experimental_exts[]; - typedef struct isa_ext_data { const char *name; const char *prop_name; diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const char *riscv_get_misa_ext_description(uint32_t bit) return val; } -#define MULTI_EXT_CFG_BOOL(_name, _prop, _defval) \ - {.name = _name, .offset = CPU_CFG_OFFSET(_prop), \ - .enabled = _defval} - -const RISCVCPUMultiExtConfig riscv_cpu_extensions[] = { - /* Defaults for standard extensions */ - MULTI_EXT_CFG_BOOL("sscofpmf", ext_sscofpmf, false), - MULTI_EXT_CFG_BOOL("smcntrpmf", ext_smcntrpmf, false), - MULTI_EXT_CFG_BOOL("smcsrind", ext_smcsrind, false), - MULTI_EXT_CFG_BOOL("smcdeleg", ext_smcdeleg, false), - MULTI_EXT_CFG_BOOL("sscsrind", ext_sscsrind, false), - MULTI_EXT_CFG_BOOL("ssccfg", ext_ssccfg, false), - MULTI_EXT_CFG_BOOL("smctr", ext_smctr, false), - MULTI_EXT_CFG_BOOL("ssctr", ext_ssctr, false), - MULTI_EXT_CFG_BOOL("zifencei", ext_zifencei, true), - MULTI_EXT_CFG_BOOL("zicfilp", ext_zicfilp, false), - MULTI_EXT_CFG_BOOL("zicfiss", ext_zicfiss, false), - MULTI_EXT_CFG_BOOL("zicsr", ext_zicsr, true), - MULTI_EXT_CFG_BOOL("zihintntl", ext_zihintntl, true), - MULTI_EXT_CFG_BOOL("zihintpause", ext_zihintpause, true), - MULTI_EXT_CFG_BOOL("zimop", ext_zimop, false), - MULTI_EXT_CFG_BOOL("zcmop", ext_zcmop, false), - MULTI_EXT_CFG_BOOL("zacas", ext_zacas, false), - MULTI_EXT_CFG_BOOL("zama16b", ext_zama16b, false), - MULTI_EXT_CFG_BOOL("zabha", ext_zabha, false), - MULTI_EXT_CFG_BOOL("zaamo", ext_zaamo, false), - MULTI_EXT_CFG_BOOL("zalasr", ext_zalasr, false), - MULTI_EXT_CFG_BOOL("zalrsc", ext_zalrsc, false), - MULTI_EXT_CFG_BOOL("zawrs", ext_zawrs, true), - MULTI_EXT_CFG_BOOL("zfa", ext_zfa, true), - MULTI_EXT_CFG_BOOL("zfbfmin", ext_zfbfmin, false), - MULTI_EXT_CFG_BOOL("zfh", ext_zfh, false), - MULTI_EXT_CFG_BOOL("zfhmin", ext_zfhmin, false), - MULTI_EXT_CFG_BOOL("zve32f", ext_zve32f, false), - MULTI_EXT_CFG_BOOL("zve32x", ext_zve32x, false), - MULTI_EXT_CFG_BOOL("zve64f", ext_zve64f, false), - MULTI_EXT_CFG_BOOL("zve64d", ext_zve64d, false), - MULTI_EXT_CFG_BOOL("zve64x", ext_zve64x, false), - MULTI_EXT_CFG_BOOL("zvfbfa", ext_zvfbfa, false), - MULTI_EXT_CFG_BOOL("zvfbfmin", ext_zvfbfmin, false), - MULTI_EXT_CFG_BOOL("zvfbfwma", ext_zvfbfwma, false), - MULTI_EXT_CFG_BOOL("zvfh", ext_zvfh, false), - MULTI_EXT_CFG_BOOL("zvfhmin", ext_zvfhmin, false), - MULTI_EXT_CFG_BOOL("sstc", ext_sstc, true), - MULTI_EXT_CFG_BOOL("ssnpm", ext_ssnpm, false), - MULTI_EXT_CFG_BOOL("sspm", ext_sspm, false), - MULTI_EXT_CFG_BOOL("supm", ext_supm, false), - - MULTI_EXT_CFG_BOOL("smaia", ext_smaia, false), - MULTI_EXT_CFG_BOOL("smdbltrp", ext_smdbltrp, false), - MULTI_EXT_CFG_BOOL("smepmp", ext_smepmp, false), - MULTI_EXT_CFG_BOOL("smpmpmt", ext_smpmpmt, false), - MULTI_EXT_CFG_BOOL("smrnmi", ext_smrnmi, false), - MULTI_EXT_CFG_BOOL("smmpm", ext_smmpm, false), - MULTI_EXT_CFG_BOOL("smnpm", ext_smnpm, false), - MULTI_EXT_CFG_BOOL("smstateen", ext_smstateen, false), - MULTI_EXT_CFG_BOOL("ssaia", ext_ssaia, false), - MULTI_EXT_CFG_BOOL("ssdbltrp", ext_ssdbltrp, false), - MULTI_EXT_CFG_BOOL("svade", ext_svade, false), - MULTI_EXT_CFG_BOOL("svadu", ext_svadu, true), - MULTI_EXT_CFG_BOOL("svinval", ext_svinval, false), - MULTI_EXT_CFG_BOOL("svnapot", ext_svnapot, false), - MULTI_EXT_CFG_BOOL("svpbmt", ext_svpbmt, false), - MULTI_EXT_CFG_BOOL("svrsw60t59b", ext_svrsw60t59b, false), - MULTI_EXT_CFG_BOOL("svvptc", ext_svvptc, true), - - MULTI_EXT_CFG_BOOL("zicntr", ext_zicntr, true), - MULTI_EXT_CFG_BOOL("zihpm", ext_zihpm, true), - MULTI_EXT_CFG_BOOL("zilsd", ext_zilsd, false), - - MULTI_EXT_CFG_BOOL("zba", ext_zba, true), - MULTI_EXT_CFG_BOOL("zbb", ext_zbb, true), - MULTI_EXT_CFG_BOOL("zbc", ext_zbc, true), - MULTI_EXT_CFG_BOOL("zbkb", ext_zbkb, false), - MULTI_EXT_CFG_BOOL("zbkc", ext_zbkc, false), - MULTI_EXT_CFG_BOOL("zbkx", ext_zbkx, false), - MULTI_EXT_CFG_BOOL("zbs", ext_zbs, true), - MULTI_EXT_CFG_BOOL("zk", ext_zk, false), - MULTI_EXT_CFG_BOOL("zkn", ext_zkn, false), - MULTI_EXT_CFG_BOOL("zknd", ext_zknd, false), - MULTI_EXT_CFG_BOOL("zkne", ext_zkne, false), - MULTI_EXT_CFG_BOOL("zknh", ext_zknh, false), - MULTI_EXT_CFG_BOOL("zkr", ext_zkr, false), - MULTI_EXT_CFG_BOOL("zks", ext_zks, false), - MULTI_EXT_CFG_BOOL("zksed", ext_zksed, false), - MULTI_EXT_CFG_BOOL("zksh", ext_zksh, false), - MULTI_EXT_CFG_BOOL("zkt", ext_zkt, false), - MULTI_EXT_CFG_BOOL("ztso", ext_ztso, false), - - MULTI_EXT_CFG_BOOL("zdinx", ext_zdinx, false), - MULTI_EXT_CFG_BOOL("zfinx", ext_zfinx, false), - MULTI_EXT_CFG_BOOL("zhinx", ext_zhinx, false), - MULTI_EXT_CFG_BOOL("zhinxmin", ext_zhinxmin, false), - - MULTI_EXT_CFG_BOOL("zicbom", ext_zicbom, true), - MULTI_EXT_CFG_BOOL("zicbop", ext_zicbop, true), - MULTI_EXT_CFG_BOOL("zicboz", ext_zicboz, true), - - MULTI_EXT_CFG_BOOL("zmmul", ext_zmmul, false), - - MULTI_EXT_CFG_BOOL("zca", ext_zca, false), - MULTI_EXT_CFG_BOOL("zcb", ext_zcb, false), - MULTI_EXT_CFG_BOOL("zcd", ext_zcd, false), - MULTI_EXT_CFG_BOOL("zce", ext_zce, false), - MULTI_EXT_CFG_BOOL("zcf", ext_zcf, false), - MULTI_EXT_CFG_BOOL("zcmp", ext_zcmp, false), - MULTI_EXT_CFG_BOOL("zcmt", ext_zcmt, false), - MULTI_EXT_CFG_BOOL("zicond", ext_zicond, false), - MULTI_EXT_CFG_BOOL("zclsd", ext_zclsd, false), - - /* Vector cryptography extensions */ - MULTI_EXT_CFG_BOOL("zvbb", ext_zvbb, false), - MULTI_EXT_CFG_BOOL("zvbc", ext_zvbc, false), - MULTI_EXT_CFG_BOOL("zvkb", ext_zvkb, false), - MULTI_EXT_CFG_BOOL("zvkg", ext_zvkg, false), - MULTI_EXT_CFG_BOOL("zvkned", ext_zvkned, false), - MULTI_EXT_CFG_BOOL("zvknha", ext_zvknha, false), - MULTI_EXT_CFG_BOOL("zvknhb", ext_zvknhb, false), - MULTI_EXT_CFG_BOOL("zvksed", ext_zvksed, false), - MULTI_EXT_CFG_BOOL("zvksh", ext_zvksh, false), - MULTI_EXT_CFG_BOOL("zvkt", ext_zvkt, false), - MULTI_EXT_CFG_BOOL("zvkn", ext_zvkn, false), - MULTI_EXT_CFG_BOOL("zvknc", ext_zvknc, false), - MULTI_EXT_CFG_BOOL("zvkng", ext_zvkng, false), - MULTI_EXT_CFG_BOOL("zvks", ext_zvks, false), - MULTI_EXT_CFG_BOOL("zvksc", ext_zvksc, false), - MULTI_EXT_CFG_BOOL("zvksg", ext_zvksg, false), - - { }, -}; - -const RISCVCPUMultiExtConfig riscv_cpu_vendor_exts[] = { - MULTI_EXT_CFG_BOOL("xtheadba", ext_xtheadba, false), - MULTI_EXT_CFG_BOOL("xtheadbb", ext_xtheadbb, false), - MULTI_EXT_CFG_BOOL("xtheadbs", ext_xtheadbs, false), - MULTI_EXT_CFG_BOOL("xtheadcmo", ext_xtheadcmo, false), - MULTI_EXT_CFG_BOOL("xtheadcondmov", ext_xtheadcondmov, false), - MULTI_EXT_CFG_BOOL("xtheadfmemidx", ext_xtheadfmemidx, false), - MULTI_EXT_CFG_BOOL("xtheadfmv", ext_xtheadfmv, false), - MULTI_EXT_CFG_BOOL("xtheadmac", ext_xtheadmac, false), - MULTI_EXT_CFG_BOOL("xtheadmemidx", ext_xtheadmemidx, false), - MULTI_EXT_CFG_BOOL("xtheadmempair", ext_xtheadmempair, false), - MULTI_EXT_CFG_BOOL("xtheadsync", ext_xtheadsync, false), - MULTI_EXT_CFG_BOOL("xventanacondops", ext_XVentanaCondOps, false), - MULTI_EXT_CFG_BOOL("xmipscbop", ext_xmipscbop, false), - MULTI_EXT_CFG_BOOL("xmipscmov", ext_xmipscmov, false), - MULTI_EXT_CFG_BOOL("xmipslsp", ext_xmipslsp, false), - MULTI_EXT_CFG_BOOL("xlrbr", ext_xlrbr, false), - - { }, -}; - -/* These are experimental so mark with 'x-' */ -const RISCVCPUMultiExtConfig riscv_cpu_experimental_exts[] = { - MULTI_EXT_CFG_BOOL("x-svukte", ext_svukte, false), - - { }, -}; - static void cpu_set_prop_err(RISCVCPU *cpu, const char *propname, Error **errp) { -- 2.53.0 From: Fangyu Yu <fangyu.yu@linux.alibaba.com> Fix IOCOUNTINH.CY toggle detection by comparing normalized CY bit rather than XORing whole register with boolean. Fixes: 2cf2a6c027ba ("hw/riscv/riscv-iommu: add IOCOUNTINH mmio writes") Signed-off-by: Fangyu Yu <fangyu.yu@linux.alibaba.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Nutty Liu <nutty.liu@hotmail.com> Message-ID: <20260509074941.99295-1-fangyu.yu@linux.alibaba.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu-hpm.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/riscv/riscv-iommu-hpm.c b/hw/riscv/riscv-iommu-hpm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu-hpm.c +++ b/hw/riscv/riscv-iommu-hpm.c @@ -XXX,XX +XXX,XX @@ void riscv_iommu_process_iocntinh_cy(RISCVIOMMUState *s, bool prev_cy_inh) s, RISCV_IOMMU_REG_IOCOUNTINH); /* We only need to process CY bit toggle. */ - if (!(inhibit ^ prev_cy_inh)) { + bool cy_inh = !!(inhibit & RISCV_IOMMU_IOCOUNTINH_CY); + if (cy_inh == prev_cy_inh) { return; } -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> The priv spec defines, for RV64, that the upper 10 bits of pmpaddr0-pmpaddr63 are WARL and are supposed to be cleared. After this patch, using the bug reproducer in [1], writing ffffffffffffffff in pmpaddr0 and reading it back now results in 003fffffffffffff. Here's the 'diff -cp' dump before and after this change: *************** IN: *** 5272,5278 **** pmpcfg10 0000000000000000 pmpcfg12 0000000000000000 pmpcfg14 0000000000000000 ! pmpaddr0 ffffffffffffffff pmpaddr1 0000000000000000 pmpaddr2 0000000000000000 pmpaddr3 0000000000000000 Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260514123342.2139464-1-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException read_pmpaddr(CPURISCVState *env, int csrno, target_ulong *val) { *val = pmpaddr_csr_read(env, csrno - CSR_PMPADDR0); + + /* + * For RV64, bits 54-63 of the address registers + * PMPAADDR(0-63) is a WARL zero field (priv spec, + * section "Physical Memory Protection CSRs"). + * + * We'll have to add an annoying TARGET_RISCV64 gate + * here to avoid complaints about masking bits 0-53 + * of a potential 32 bit target_ulong '*var'. + */ +#ifdef TARGET_RISCV64 + if (env->misa_mxl == MXL_RV64 + && csrno >= CSR_PMPADDR0 && csrno <= CSR_PMPADDR63) { + target_ulong read_mask = MAKE_64BIT_MASK(0, 54); + *val &= read_mask; + } +#endif return RISCV_EXCP_NONE; } -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> In build_rimt(), the calculation of `num_ids` for the ID mapping array incorrectly uses the same formula (`0xffff - s->pci_iommu_bdf`) for both System IOMMU and PCI IOMMU topologies. For a System IOMMU, `s->pci_iommu_bdf` is 0. This results in a `num_ids` value of 0xffff. Since the source ID base starts at 0, the mapping only covers Requester IDs from 0 to 0xfffe. The final valid PCI Requester ID (0xffff) is erroneously omitted from the RIMT table. Fix this by decoupling the `num_ids` calculation. For System IOMMUs, explicitly set `num_ids` to 0x10000 to cover the entire PCI Requester ID space. This issue was discovered and reported by SpecHunter, an AI-driven architecture specification analysis tool. Link: https://github.com/yizishun/rv-isa-sec/blob/c78dacf66c8acd677b3538c837fde310bb71a97b/output/riscv-server-platform/pr-102/qemu.txt#L32 Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512062310.348208-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt-acpi-build.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/riscv/virt-acpi-build.c b/hw/riscv/virt-acpi-build.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt-acpi-build.c +++ b/hw/riscv/virt-acpi-build.c @@ -XXX,XX +XXX,XX @@ static void build_rimt(GArray *table_data, BIOSLinker *linker, range = &g_array_index(iommu_idmaps, AcpiRimtIdMapping, i); if (virt_is_iommu_sys_enabled(s)) { range->source_id_base = 0; + range->num_ids = 0x10000; } else { range->source_id_base = s->pci_iommu_bdf + 1; + range->num_ids = 0xffff - s->pci_iommu_bdf; } - range->num_ids = 0xffff - s->pci_iommu_bdf; build_rimt_id_mapping(table_data, range->source_id_base, range->num_ids, iommu_offset); } -- 2.53.0 From: Portia Stephens <portias@oss.tenstorrent.com> The counter value was not being bitshifted for a hpmcounterh read resulting in hpmcounterh returning the bottom 32-bits. Fixes: cfc96df65e01 ("target/riscv: Remove upper_half from riscv_pmu_ctr_get_fixed_counters_val") Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3498 Cc: qemu-stable@nongnu.org Signed-off-by: Portia Stephens <portias@oss.tenstorrent.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260519043352.3685866-1-stephensportia@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ RISCVException riscv_pmu_read_ctr(CPURISCVState *env, target_ulong *val, */ if (riscv_pmu_ctr_monitor_cycles(env, ctr_idx) || riscv_pmu_ctr_monitor_instructions(env, ctr_idx)) { - *val = riscv_pmu_ctr_get_fixed_counters_val(env, ctr_idx) - - ctr_prev + ctr_val; + uint64_t cntr = riscv_pmu_ctr_get_fixed_counters_val(env, ctr_idx) - + ctr_prev + ctr_val; + *val = extract64(cntr, start, length); } else { *val = ctr_val; } -- 2.53.0 From: Jim Shu <jim.shu@sifive.com> According to the AIA spec ch4.7 ("Precise effects on interrupt-pending bits"), pending bit of APLIC should be set/cleared whenever the rectified input value is high/low in the both level-trigger mode and direct delivery mode. Currently, QEMU APLIC only clears the pending bit when interrupt is claimed in APLIC, but not clears it when the rectified input value is low. (e.g. IRQ source signal is low in the LEVEL_HIGH/Level1 mode). The software may receive an additional IRQ if the peripheral triggers one after the software clears the APLIC IRQ but before it clears the peripheral's IRQ. Thus, we also clear the pending bit via the rectified input value in the level-trigger mode. This change doesn't affect MSI delivery mode. Calling riscv_aplic_msi_irq_update() when IRQ pending is low will do nothing. Signed-off-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Chao Liu <chao.liu.zevorn@gmail.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260428160103.3551125-2-jim.shu@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/intc/riscv_aplic.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/hw/intc/riscv_aplic.c b/hw/intc/riscv_aplic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/riscv_aplic.c +++ b/hw/intc/riscv_aplic.c @@ -XXX,XX +XXX,XX @@ static void riscv_aplic_request(void *opaque, int irq, int level) } break; case APLIC_SOURCECFG_SM_LEVEL_HIGH: - if ((level > 0) && !(state & APLIC_ISTATE_PENDING)) { - riscv_aplic_set_pending_raw(aplic, irq, true); + if ((level > 0) != !!(state & APLIC_ISTATE_PENDING)) { + riscv_aplic_set_pending_raw(aplic, irq, level > 0); update = true; } break; case APLIC_SOURCECFG_SM_LEVEL_LOW: - if ((level <= 0) && !(state & APLIC_ISTATE_PENDING)) { - riscv_aplic_set_pending_raw(aplic, irq, true); + if ((level <= 0) != !!(state & APLIC_ISTATE_PENDING)) { + riscv_aplic_set_pending_raw(aplic, irq, level <= 0); update = true; } break; -- 2.53.0 From: Jim Shu <jim.shu@sifive.com> Clearing APLIC registers and qemu_irq in the reset function Signed-off-by: Jim Shu <jim.shu@sifive.com> Signed-off-by: Fea.Wang <fea.wang@sifive.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260428160103.3551125-3-jim.shu@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/intc/riscv_aplic.c | 45 ++++++++++++++++++++++++++++++++++++++----- 1 file changed, 40 insertions(+), 5 deletions(-) diff --git a/hw/intc/riscv_aplic.c b/hw/intc/riscv_aplic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/riscv_aplic.c +++ b/hw/intc/riscv_aplic.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps riscv_aplic_ops = { } }; +static void riscv_aplic_reset_enter(Object *obj, ResetType type) +{ + RISCVAPLICState *aplic = RISCV_APLIC(obj); + int i; + + aplic->domaincfg = 0; + memset(aplic->sourcecfg, 0, sizeof(uint32_t) * aplic->num_irqs); + memset(aplic->target, 0, sizeof(uint32_t) * aplic->num_irqs); + if (!aplic->msimode) { + for (i = 0; i < aplic->num_irqs; i++) { + aplic->target[i] = 1; + } + } + + for (i = 0; i < aplic->num_irqs ; i++) { + riscv_aplic_set_enabled_raw(aplic, i, false); + } + + /* Need to unlock [ms]msicfgaddrh.L */ + aplic->mmsicfgaddr = 0; + aplic->mmsicfgaddrH = 0; + aplic->smsicfgaddr = 0; + aplic->smsicfgaddrH = 0; + + if (!aplic->msimode) { + /* Reset IDC registers only in non-MSI mode */ + for (i = 0; i < aplic->num_harts; i++) { + aplic->idelivery[i] = 0; + aplic->iforce[i] = 0; + aplic->ithreshold[i] = 0; + } + + for (i = 0; i < aplic->num_harts; i++) { + qemu_irq_lower(aplic->external_irqs[i]); + } + } +} + static void riscv_aplic_realize(DeviceState *dev, Error **errp) { uint32_t i; @@ -XXX,XX +XXX,XX @@ static void riscv_aplic_realize(DeviceState *dev, Error **errp) aplic->sourcecfg = g_new0(uint32_t, aplic->num_irqs); aplic->state = g_new0(uint32_t, aplic->num_irqs); aplic->target = g_new0(uint32_t, aplic->num_irqs); - if (!aplic->msimode) { - for (i = 0; i < aplic->num_irqs; i++) { - aplic->target[i] = 1; - } - } aplic->idelivery = g_new0(uint32_t, aplic->num_harts); aplic->iforce = g_new0(uint32_t, aplic->num_harts); aplic->ithreshold = g_new0(uint32_t, aplic->num_harts); @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_riscv_aplic = { static void riscv_aplic_class_init(ObjectClass *klass, const void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); device_class_set_props(dc, riscv_aplic_properties); dc->realize = riscv_aplic_realize; + rc->phases.enter = riscv_aplic_reset_enter; dc->vmsd = &vmstate_riscv_aplic; } -- 2.53.0 From: Jim Shu <jim.shu@sifive.com> Clearing IMSIC registers and qemu_irq in the reset function Signed-off-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260428160103.3551125-4-jim.shu@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/intc/riscv_imsic.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/hw/intc/riscv_imsic.c b/hw/intc/riscv_imsic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/riscv_imsic.c +++ b/hw/intc/riscv_imsic.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps riscv_imsic_ops = { } }; +static void riscv_imsic_reset_enter(Object *obj, ResetType type) +{ + RISCVIMSICState *imsic = RISCV_IMSIC(obj); + int i; + + memset(imsic->eidelivery, 0, sizeof(uint32_t) * imsic->num_pages); + memset(imsic->eithreshold, 0, sizeof(uint32_t) * imsic->num_pages); + + for (i = 0; i < imsic->num_eistate; i++) { + imsic->eistate[i] &= ~IMSIC_EISTATE_ENABLED; + } + + for (i = 0; i < imsic->num_pages; i++) { + qemu_irq_lower(imsic->external_irqs[i]); + } +} + static void riscv_imsic_realize(DeviceState *dev, Error **errp) { RISCVIMSICState *imsic = RISCV_IMSIC(dev); @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_riscv_imsic = { static void riscv_imsic_class_init(ObjectClass *klass, const void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); device_class_set_props(dc, riscv_imsic_properties); dc->realize = riscv_imsic_realize; + rc->phases.enter = riscv_imsic_reset_enter; dc->vmsd = &vmstate_riscv_imsic; } -- 2.53.0 From: Jim Shu <jim.shu@sifive.com> Add the trace events for APLIC read/write functions. Signed-off-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260428160103.3551125-5-jim.shu@sifive.com> [ Changes by AF: - Init val to zero to avoid uninitialised build errors ] Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/intc/riscv_aplic.c | 63 ++++++++++++++++++++++++++----------------- hw/intc/trace-events | 4 +++ 2 files changed, 42 insertions(+), 25 deletions(-) diff --git a/hw/intc/riscv_aplic.c b/hw/intc/riscv_aplic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/riscv_aplic.c +++ b/hw/intc/riscv_aplic.c @@ -XXX,XX +XXX,XX @@ #include "system/tcg.h" #include "kvm/kvm_riscv.h" #include "migration/vmstate.h" +#include "trace.h" #define APLIC_MAX_IDC (1UL << 14) #define APLIC_MAX_SOURCE 1024 @@ -XXX,XX +XXX,XX @@ static void riscv_aplic_request(void *opaque, int irq, int level) static uint64_t riscv_aplic_read(void *opaque, hwaddr addr, unsigned size) { uint32_t irq, word, idc; + uint64_t val = 0; RISCVAPLICState *aplic = opaque; /* Reads must be 4 byte words */ @@ -XXX,XX +XXX,XX @@ static uint64_t riscv_aplic_read(void *opaque, hwaddr addr, unsigned size) } if (addr == APLIC_DOMAINCFG) { - return APLIC_DOMAINCFG_RDONLY | aplic->domaincfg | - (aplic->msimode ? APLIC_DOMAINCFG_DM : 0); + val = APLIC_DOMAINCFG_RDONLY | aplic->domaincfg | + (aplic->msimode ? APLIC_DOMAINCFG_DM : 0); } else if ((APLIC_SOURCECFG_BASE <= addr) && (addr < (APLIC_SOURCECFG_BASE + (aplic->num_irqs - 1) * 4))) { irq = ((addr - APLIC_SOURCECFG_BASE) >> 2) + 1; - return aplic->sourcecfg[irq]; + val = aplic->sourcecfg[irq]; } else if (aplic->mmode && aplic->msimode && (addr == APLIC_MMSICFGADDR)) { - return aplic->mmsicfgaddr; + val = aplic->mmsicfgaddr; } else if (aplic->mmode && aplic->msimode && (addr == APLIC_MMSICFGADDRH)) { - return aplic->mmsicfgaddrH; + val = aplic->mmsicfgaddrH; } else if (aplic->mmode && aplic->msimode && (addr == APLIC_SMSICFGADDR)) { /* @@ -XXX,XX +XXX,XX @@ static uint64_t riscv_aplic_read(void *opaque, hwaddr addr, unsigned size) * only zero in at least one of the supervisor-level child * domains). */ - return (aplic->num_children) ? aplic->smsicfgaddr : 0; + val = (aplic->num_children) ? aplic->smsicfgaddr : 0; } else if (aplic->mmode && aplic->msimode && (addr == APLIC_SMSICFGADDRH)) { - return (aplic->num_children) ? aplic->smsicfgaddrH : 0; + val = (aplic->num_children) ? aplic->smsicfgaddrH : 0; } else if ((APLIC_SETIP_BASE <= addr) && (addr < (APLIC_SETIP_BASE + aplic->bitfield_words * 4))) { word = (addr - APLIC_SETIP_BASE) >> 2; - return riscv_aplic_read_pending_word(aplic, word); + val = riscv_aplic_read_pending_word(aplic, word); } else if (addr == APLIC_SETIPNUM) { - return 0; + val = 0; } else if ((APLIC_CLRIP_BASE <= addr) && (addr < (APLIC_CLRIP_BASE + aplic->bitfield_words * 4))) { word = (addr - APLIC_CLRIP_BASE) >> 2; - return riscv_aplic_read_input_word(aplic, word); + val = riscv_aplic_read_input_word(aplic, word); } else if (addr == APLIC_CLRIPNUM) { - return 0; + val = 0; } else if ((APLIC_SETIE_BASE <= addr) && (addr < (APLIC_SETIE_BASE + aplic->bitfield_words * 4))) { word = (addr - APLIC_SETIE_BASE) >> 2; - return riscv_aplic_read_enabled_word(aplic, word); + val = riscv_aplic_read_enabled_word(aplic, word); } else if (addr == APLIC_SETIENUM) { - return 0; + val = 0; } else if ((APLIC_CLRIE_BASE <= addr) && (addr < (APLIC_CLRIE_BASE + aplic->bitfield_words * 4))) { - return 0; + val = 0; } else if (addr == APLIC_CLRIENUM) { - return 0; + val = 0; } else if (addr == APLIC_SETIPNUM_LE) { - return 0; + val = 0; } else if (addr == APLIC_SETIPNUM_BE) { - return 0; + val = 0; } else if (addr == APLIC_GENMSI) { - return (aplic->msimode) ? aplic->genmsi : 0; + val = (aplic->msimode) ? aplic->genmsi : 0; } else if ((APLIC_TARGET_BASE <= addr) && (addr < (APLIC_TARGET_BASE + (aplic->num_irqs - 1) * 4))) { irq = ((addr - APLIC_TARGET_BASE) >> 2) + 1; if (!riscv_aplic_source_active(aplic, irq)) { - return 0; + val = 0; + } else { + val = aplic->target[irq]; } - return aplic->target[irq]; } else if (!aplic->msimode && (APLIC_IDC_BASE <= addr) && (addr < (APLIC_IDC_BASE + aplic->num_harts * APLIC_IDC_SIZE))) { idc = (addr - APLIC_IDC_BASE) / APLIC_IDC_SIZE; switch (addr - (APLIC_IDC_BASE + idc * APLIC_IDC_SIZE)) { case APLIC_IDC_IDELIVERY: - return aplic->idelivery[idc]; + val = aplic->idelivery[idc]; + break; case APLIC_IDC_IFORCE: - return aplic->iforce[idc]; + val = aplic->iforce[idc]; + break; case APLIC_IDC_ITHRESHOLD: - return aplic->ithreshold[idc]; + val = aplic->ithreshold[idc]; + break; case APLIC_IDC_TOPI: - return riscv_aplic_idc_topi(aplic, idc); + val = riscv_aplic_idc_topi(aplic, idc); + break; case APLIC_IDC_CLAIMI: - return riscv_aplic_idc_claimi(aplic, idc); + val = riscv_aplic_idc_claimi(aplic, idc); + break; default: goto err; }; } + trace_riscv_aplic_read(addr, size, val); + return val; + err: qemu_log_mask(LOG_GUEST_ERROR, "%s: Invalid register read 0x%" HWADDR_PRIx "\n", @@ -XXX,XX +XXX,XX @@ static void riscv_aplic_write(void *opaque, hwaddr addr, uint64_t value, goto err; } + trace_riscv_aplic_write(addr, size, value); + if (addr == APLIC_DOMAINCFG) { /* Only IE bit writable at the moment */ value &= APLIC_DOMAINCFG_IE; diff --git a/hw/intc/trace-events b/hw/intc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/trace-events +++ b/hw/intc/trace-events @@ -XXX,XX +XXX,XX @@ loongarch_msi_set_irq(int irq_num) "set msi irq %d" loongarch_extioi_setirq(int irq, int level) "set extirq irq %d level %d" loongarch_extioi_readw(uint64_t addr, uint64_t val) "addr: 0x%"PRIx64 "val: 0x%" PRIx64 loongarch_extioi_writew(uint64_t addr, uint64_t val) "addr: 0x%"PRIx64 "val: 0x%" PRIx64 + +# riscv_aplic.c +riscv_aplic_read(uint64_t offset, unsigned size, uint64_t value) "offset: 0x%" PRIx64 ", size: %u, value: 0x%" PRIx64 +riscv_aplic_write(uint64_t offset, unsigned size, uint64_t value) "offset: 0x%" PRIx64 ", size: %u, value: 0x%" PRIx64 -- 2.53.0 From: Jay Chang <jay.chang@sifive.com> When software clears CMD_ILL or CQMF error bits by writing 1 to CQCSR, the IOMMU should re-check the command queue and continue processing pending commands if head != tail. Per RISC-V IOMMU specification : If command-queue access leads to a memory fault then the command-queue-memory-fault bit is set to 1 and the commandqueue stalls until this bit is cleared. To re-enable command processing, software should clear this bit by writing 1. Signed-off-by: Jay Chang <jay.chang@sifive.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Nutty Liu <nutty.liu@hotmail.com> Message-ID: <20260518070143.8405-1-jay.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/hw/riscv/riscv-iommu.c b/hw/riscv/riscv-iommu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.c +++ b/hw/riscv/riscv-iommu.c @@ -XXX,XX +XXX,XX @@ static void riscv_iommu_process_cq_control(RISCVIOMMUState *s) } riscv_iommu_reg_mod32(s, RISCV_IOMMU_REG_CQCSR, ctrl_set, ctrl_clr); + + /* + * After clearing error bits (CMD_ILL, CQMF), if queue is still active, + * re-process pending command. + */ + ctrl_set = riscv_iommu_reg_get32(s, RISCV_IOMMU_REG_CQCSR); + if ((ctrl_set & RISCV_IOMMU_CQCSR_CQON) && + !(ctrl_set & (RISCV_IOMMU_CQCSR_CMD_ILL | RISCV_IOMMU_CQCSR_CQMF))) { + riscv_iommu_process_cq_tail(s); + } } static void riscv_iommu_process_fq_control(RISCVIOMMUState *s) -- 2.53.0