The following changes since commit 44b7329de469c121555a1acf9b288f3ae71b8e61: Merge tag 'pull-qapi-2024-07-06' of https://repo.or.cz/qemu/armbru into staging (2024-07-07 13:23:28 -0700) are available in the Git repository at: https://github.com/legoater/qemu/ tags/pull-aspeed-20240709 for you to fetch changes up to d847ea7cfc6321e2519f587d4077428d90557178: machine_aspeed.py: update to test network for AST2700 (2024-07-09 08:05:44 +0200) ---------------------------------------------------------------- aspeed queue: * support AST2700 network ---------------------------------------------------------------- Jamin Lin (8): hw/net:ftgmac100: update memory region size to 64KB hw/net:ftgmac100: update ring base address to 64 bits hw/net:ftgmac100: introduce TX and RX ring base address high registers to support 64 bits hw/net:ftgmac100: update TX and RX packet buffers address to 64 bits aspeed/soc: set dma64 property for AST2700 ftgmac100 hw/block: m25p80: support quad mode for w25q01jvq machine_aspeed.py: update to test ASPEED OpenBMC SDK v09.02 for AST2700 machine_aspeed.py: update to test network for AST2700 include/hw/net/ftgmac100.h | 17 +++-- hw/arm/aspeed_ast27x0.c | 3 + hw/block/m25p80.c | 16 +++++ hw/net/ftgmac100.c | 147 +++++++++++++++++++++++++++++++++------- tests/avocado/machine_aspeed.py | 12 ++-- 5 files changed, 162 insertions(+), 33 deletions(-) From: Jamin Lin <jamin_lin@aspeedtech.com> According to the datasheet of ASPEED SOCs, one MAC controller owns 128KB of register space for AST2500. However, one MAC controller only owns 64KB of register space for AST2600 and AST2700. It set the memory region size 128KB and it occupied another controllers Address Spaces. Update one MAC controller memory region size to 0x1000 because AST2500 did not use register spaces over than 64KB. Introduce a new container region size to 0x1000 and its range is from 0 to 0xfff. This container is mapped a sub region for the current set of register. This sub region range is from 0 to 0xff. Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> --- include/hw/net/ftgmac100.h | 4 ++++ hw/net/ftgmac100.c | 11 ++++++++--- 2 files changed, 12 insertions(+), 3 deletions(-) diff --git a/include/hw/net/ftgmac100.h b/include/hw/net/ftgmac100.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/ftgmac100.h +++ b/include/hw/net/ftgmac100.h @@ -XXX,XX +XXX,XX @@ #define TYPE_FTGMAC100 "ftgmac100" OBJECT_DECLARE_SIMPLE_TYPE(FTGMAC100State, FTGMAC100) +#define FTGMAC100_MEM_SIZE 0x1000 +#define FTGMAC100_REG_MEM_SIZE 0x100 + #include "hw/sysbus.h" #include "net/net.h" @@ -XXX,XX +XXX,XX @@ struct FTGMAC100State { NICState *nic; NICConf conf; qemu_irq irq; + MemoryRegion iomem_container; MemoryRegion iomem; uint8_t frame[FTGMAC100_MAX_FRAME_SIZE]; diff --git a/hw/net/ftgmac100.c b/hw/net/ftgmac100.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/ftgmac100.c +++ b/hw/net/ftgmac100.c @@ -XXX,XX +XXX,XX @@ static void ftgmac100_realize(DeviceState *dev, Error **errp) s->rxdes0_edorr = FTGMAC100_RXDES0_EDORR; } - memory_region_init_io(&s->iomem, OBJECT(dev), &ftgmac100_ops, s, - TYPE_FTGMAC100, 0x2000); - sysbus_init_mmio(sbd, &s->iomem); + memory_region_init(&s->iomem_container, OBJECT(s), + TYPE_FTGMAC100 ".container", FTGMAC100_MEM_SIZE); + sysbus_init_mmio(sbd, &s->iomem_container); + + memory_region_init_io(&s->iomem, OBJECT(s), &ftgmac100_ops, s, + TYPE_FTGMAC100 ".regs", FTGMAC100_REG_MEM_SIZE); + memory_region_add_subregion(&s->iomem_container, 0x0, &s->iomem); + sysbus_init_irq(sbd, &s->irq); qemu_macaddr_default_if_unset(&s->conf.macaddr); -- 2.45.2 From: Jamin Lin <jamin_lin@aspeedtech.com> Update TX and RX ring base address data type to uint64_t for 64 bits dram address DMA support. Both "Normal Priority Transmit Ring Base Address Register(0x20)" and "Receive Ring Base Address Register (0x24)" are used for saving the low part physical address of descriptor manager. Therefore, changes to set TX and RX descriptor manager address bits [31:0] in ftgmac100_read and ftgmac100_write functions. Incrementing the version of vmstate to 2. Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> --- include/hw/net/ftgmac100.h | 9 ++++----- hw/net/ftgmac100.c | 33 ++++++++++++++++----------------- 2 files changed, 20 insertions(+), 22 deletions(-) diff --git a/include/hw/net/ftgmac100.h b/include/hw/net/ftgmac100.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/ftgmac100.h +++ b/include/hw/net/ftgmac100.h @@ -XXX,XX +XXX,XX @@ struct FTGMAC100State { uint32_t isr; uint32_t ier; uint32_t rx_enabled; - uint32_t rx_ring; - uint32_t rx_descriptor; - uint32_t tx_ring; - uint32_t tx_descriptor; uint32_t math[2]; uint32_t rbsr; uint32_t itc; @@ -XXX,XX +XXX,XX @@ struct FTGMAC100State { uint32_t phycr; uint32_t phydata; uint32_t fcr; - + uint64_t rx_ring; + uint64_t rx_descriptor; + uint64_t tx_ring; + uint64_t tx_descriptor; uint32_t phy_status; uint32_t phy_control; diff --git a/hw/net/ftgmac100.c b/hw/net/ftgmac100.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/ftgmac100.c +++ b/hw/net/ftgmac100.c @@ -XXX,XX +XXX,XX @@ out: return frame_size; } -static void ftgmac100_do_tx(FTGMAC100State *s, uint32_t tx_ring, - uint32_t tx_descriptor) +static void ftgmac100_do_tx(FTGMAC100State *s, uint64_t tx_ring, + uint64_t tx_descriptor) { int frame_size = 0; uint8_t *ptr = s->frame; - uint32_t addr = tx_descriptor; + uint64_t addr = tx_descriptor; uint32_t flags = 0; while (1) { @@ -XXX,XX +XXX,XX @@ static uint64_t ftgmac100_read(void *opaque, hwaddr addr, unsigned size) case FTGMAC100_MATH1: return s->math[1]; case FTGMAC100_RXR_BADR: - return s->rx_ring; + return extract64(s->rx_ring, 0, 32); case FTGMAC100_NPTXR_BADR: - return s->tx_ring; + return extract64(s->tx_ring, 0, 32); case FTGMAC100_ITC: return s->itc; case FTGMAC100_DBLAC: @@ -XXX,XX +XXX,XX @@ static void ftgmac100_write(void *opaque, hwaddr addr, HWADDR_PRIx "\n", __func__, value); return; } - - s->rx_ring = value; - s->rx_descriptor = s->rx_ring; + s->rx_ring = deposit64(s->rx_ring, 0, 32, value); + s->rx_descriptor = deposit64(s->rx_descriptor, 0, 32, value); break; case FTGMAC100_RBSR: /* DMA buffer size */ @@ -XXX,XX +XXX,XX @@ static void ftgmac100_write(void *opaque, hwaddr addr, HWADDR_PRIx "\n", __func__, value); return; } - s->tx_ring = value; - s->tx_descriptor = s->tx_ring; + s->tx_ring = deposit64(s->tx_ring, 0, 32, value); + s->tx_descriptor = deposit64(s->tx_descriptor, 0, 32, value); break; case FTGMAC100_NPTXPD: /* Trigger transmit */ @@ -XXX,XX +XXX,XX @@ static ssize_t ftgmac100_receive(NetClientState *nc, const uint8_t *buf, FTGMAC100State *s = FTGMAC100(qemu_get_nic_opaque(nc)); FTGMAC100Desc bd; uint32_t flags = 0; - uint32_t addr; + uint64_t addr; uint32_t crc; uint32_t buf_addr; uint8_t *crc_ptr; @@ -XXX,XX +XXX,XX @@ static void ftgmac100_realize(DeviceState *dev, Error **errp) static const VMStateDescription vmstate_ftgmac100 = { .name = TYPE_FTGMAC100, - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (const VMStateField[]) { VMSTATE_UINT32(irq_state, FTGMAC100State), VMSTATE_UINT32(isr, FTGMAC100State), VMSTATE_UINT32(ier, FTGMAC100State), VMSTATE_UINT32(rx_enabled, FTGMAC100State), - VMSTATE_UINT32(rx_ring, FTGMAC100State), VMSTATE_UINT32(rbsr, FTGMAC100State), - VMSTATE_UINT32(tx_ring, FTGMAC100State), - VMSTATE_UINT32(rx_descriptor, FTGMAC100State), - VMSTATE_UINT32(tx_descriptor, FTGMAC100State), VMSTATE_UINT32_ARRAY(math, FTGMAC100State, 2), VMSTATE_UINT32(itc, FTGMAC100State), VMSTATE_UINT32(aptcr, FTGMAC100State), @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_ftgmac100 = { VMSTATE_UINT32(phy_int_mask, FTGMAC100State), VMSTATE_UINT32(txdes0_edotr, FTGMAC100State), VMSTATE_UINT32(rxdes0_edorr, FTGMAC100State), + VMSTATE_UINT64(rx_ring, FTGMAC100State), + VMSTATE_UINT64(tx_ring, FTGMAC100State), + VMSTATE_UINT64(rx_descriptor, FTGMAC100State), + VMSTATE_UINT64(tx_descriptor, FTGMAC100State), VMSTATE_END_OF_LIST() } }; -- 2.45.2 From: Jamin Lin <jamin_lin@aspeedtech.com> ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35) And the base address of dram is "0x4 00000000" which is 64bits address. It have "Normal Priority Transmit Ring Base Address Register High(0x17C)", "High Priority Transmit Ring Base Address Register High(0x184)" and "Receive Ring Base Address Register High(0x18C)" to save the high part physical address of descriptor manager. Ex: TX descriptor manager address [34:0] The "Normal Priority Transmit Ring Base Address Register High(0x17C)" bits [2:0] which corresponds the bits [34:32] of the 64 bits address of the TX ring buffer address. The "Normal Priority Transmit Ring Base Address Register(0x20)" bits [31:0] which corresponds the bits [31:0] of the 64 bits address of the TX ring buffer address. Introduce a new sub region which size is 0x100 for the set of new registers and map it at 0x100 in the container region. This sub region range is from 0x100 to 0x1ff. Introduce a new property and object attribute to activate the region for new registers. Introduce a new memop handlers for the new register read and write. Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> --- include/hw/net/ftgmac100.h | 4 ++ hw/net/ftgmac100.c | 82 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 86 insertions(+) diff --git a/include/hw/net/ftgmac100.h b/include/hw/net/ftgmac100.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/ftgmac100.h +++ b/include/hw/net/ftgmac100.h @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(FTGMAC100State, FTGMAC100) #define FTGMAC100_MEM_SIZE 0x1000 #define FTGMAC100_REG_MEM_SIZE 0x100 +#define FTGMAC100_REG_HIGH_MEM_SIZE 0x100 +#define FTGMAC100_REG_HIGH_OFFSET 0x100 #include "hw/sysbus.h" #include "net/net.h" @@ -XXX,XX +XXX,XX @@ struct FTGMAC100State { qemu_irq irq; MemoryRegion iomem_container; MemoryRegion iomem; + MemoryRegion iomem_high; uint8_t frame[FTGMAC100_MAX_FRAME_SIZE]; @@ -XXX,XX +XXX,XX @@ struct FTGMAC100State { bool aspeed; uint32_t txdes0_edotr; uint32_t rxdes0_edorr; + bool dma64; }; #define TYPE_ASPEED_MII "aspeed-mmi" diff --git a/hw/net/ftgmac100.c b/hw/net/ftgmac100.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/ftgmac100.c +++ b/hw/net/ftgmac100.c @@ -XXX,XX +XXX,XX @@ #define FTGMAC100_PHYDATA 0x64 #define FTGMAC100_FCR 0x68 +/* + * FTGMAC100 registers high + * + * values below are offset by - FTGMAC100_REG_HIGH_OFFSET from datasheet + * because its memory region is start at FTGMAC100_REG_HIGH_OFFSET + */ +#define FTGMAC100_NPTXR_BADR_HIGH (0x17C - FTGMAC100_REG_HIGH_OFFSET) +#define FTGMAC100_HPTXR_BADR_HIGH (0x184 - FTGMAC100_REG_HIGH_OFFSET) +#define FTGMAC100_RXR_BADR_HIGH (0x18C - FTGMAC100_REG_HIGH_OFFSET) + /* * Interrupt status register & interrupt enable register */ @@ -XXX,XX +XXX,XX @@ static void ftgmac100_write(void *opaque, hwaddr addr, ftgmac100_update_irq(s); } +static uint64_t ftgmac100_high_read(void *opaque, hwaddr addr, unsigned size) +{ + FTGMAC100State *s = FTGMAC100(opaque); + uint64_t val = 0; + + switch (addr) { + case FTGMAC100_NPTXR_BADR_HIGH: + val = extract64(s->tx_ring, 32, 32); + break; + case FTGMAC100_HPTXR_BADR_HIGH: + /* High Priority Transmit Ring Base High Address */ + qemu_log_mask(LOG_UNIMP, "%s: read to unimplemented register 0x%" + HWADDR_PRIx "\n", __func__, addr); + break; + case FTGMAC100_RXR_BADR_HIGH: + val = extract64(s->rx_ring, 32, 32); + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad address at offset 0x%" + HWADDR_PRIx "\n", __func__, addr); + break; + } + + return val; +} + +static void ftgmac100_high_write(void *opaque, hwaddr addr, + uint64_t value, unsigned size) +{ + FTGMAC100State *s = FTGMAC100(opaque); + + switch (addr) { + case FTGMAC100_NPTXR_BADR_HIGH: + s->tx_ring = deposit64(s->tx_ring, 32, 32, value); + s->tx_descriptor = deposit64(s->tx_descriptor, 32, 32, value); + break; + case FTGMAC100_HPTXR_BADR_HIGH: + /* High Priority Transmit Ring Base High Address */ + qemu_log_mask(LOG_UNIMP, "%s: write to unimplemented register 0x%" + HWADDR_PRIx "\n", __func__, addr); + break; + case FTGMAC100_RXR_BADR_HIGH: + s->rx_ring = deposit64(s->rx_ring, 32, 32, value); + s->rx_descriptor = deposit64(s->rx_descriptor, 32, 32, value); + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad address at offset 0x%" + HWADDR_PRIx "\n", __func__, addr); + break; + } + + ftgmac100_update_irq(s); +} + static int ftgmac100_filter(FTGMAC100State *s, const uint8_t *buf, size_t len) { unsigned mcast_idx; @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps ftgmac100_ops = { .endianness = DEVICE_LITTLE_ENDIAN, }; +static const MemoryRegionOps ftgmac100_high_ops = { + .read = ftgmac100_high_read, + .write = ftgmac100_high_write, + .valid.min_access_size = 4, + .valid.max_access_size = 4, + .endianness = DEVICE_LITTLE_ENDIAN, +}; + static void ftgmac100_cleanup(NetClientState *nc) { FTGMAC100State *s = FTGMAC100(qemu_get_nic_opaque(nc)); @@ -XXX,XX +XXX,XX @@ static void ftgmac100_realize(DeviceState *dev, Error **errp) TYPE_FTGMAC100 ".regs", FTGMAC100_REG_MEM_SIZE); memory_region_add_subregion(&s->iomem_container, 0x0, &s->iomem); + if (s->dma64) { + memory_region_init_io(&s->iomem_high, OBJECT(s), &ftgmac100_high_ops, + s, TYPE_FTGMAC100 ".regs.high", + FTGMAC100_REG_HIGH_MEM_SIZE); + memory_region_add_subregion(&s->iomem_container, + FTGMAC100_REG_HIGH_OFFSET, + &s->iomem_high); + } + sysbus_init_irq(sbd, &s->irq); qemu_macaddr_default_if_unset(&s->conf.macaddr); @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_ftgmac100 = { static Property ftgmac100_properties[] = { DEFINE_PROP_BOOL("aspeed", FTGMAC100State, aspeed, false), DEFINE_NIC_PROPERTIES(FTGMAC100State, conf), + DEFINE_PROP_BOOL("dma64", FTGMAC100State, dma64, false), DEFINE_PROP_END_OF_LIST(), }; -- 2.45.2 From: Jamin Lin <jamin_lin@aspeedtech.com> ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35) And the base address of dram is "0x4 00000000" which is 64bits address. It have "TXDES 2" and "RXDES 2" to save the high part physical address of packet buffer. Ex: TX packet buffer address [34:0] The "TXDES 2" bits [18:16] which corresponds the bits [34:32] of the 64 bits address of the TX packet buffer address and "TXDES 3" bits [31:0] which corresponds the bits [31:0] of the 64 bits address of the TX packet buffer address. Update TX and RX packet buffers address type to 64 bits for dram 64 bits address DMA support. Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> --- hw/net/ftgmac100.c | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-) diff --git a/hw/net/ftgmac100.c b/hw/net/ftgmac100.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/ftgmac100.c +++ b/hw/net/ftgmac100.c @@ -XXX,XX +XXX,XX @@ #define FTGMAC100_TXDES1_TX2FIC (1 << 30) #define FTGMAC100_TXDES1_TXIC (1 << 31) +#define FTGMAC100_TXDES2_TXBUF_BADR_HI(x) (((x) >> 16) & 0x7) + /* * Receive descriptor */ @@ -XXX,XX +XXX,XX @@ #define FTGMAC100_RXDES1_UDP_CHKSUM_ERR (1 << 26) #define FTGMAC100_RXDES1_IP_CHKSUM_ERR (1 << 27) +#define FTGMAC100_RXDES2_RXBUF_BADR_HI(x) (((x) >> 16) & 0x7) + /* * Receive and transmit Buffer Descriptor */ typedef struct { uint32_t des0; uint32_t des1; - uint32_t des2; /* not used by HW */ + uint32_t des2; /* used by HW 64 bits DMA */ uint32_t des3; } FTGMAC100Desc; @@ -XXX,XX +XXX,XX @@ static void ftgmac100_do_tx(FTGMAC100State *s, uint64_t tx_ring, int frame_size = 0; uint8_t *ptr = s->frame; uint64_t addr = tx_descriptor; + uint64_t buf_addr = 0; uint32_t flags = 0; while (1) { @@ -XXX,XX +XXX,XX @@ static void ftgmac100_do_tx(FTGMAC100State *s, uint64_t tx_ring, len = sizeof(s->frame) - frame_size; } - if (dma_memory_read(&address_space_memory, bd.des3, + buf_addr = bd.des3; + if (s->dma64) { + buf_addr = deposit64(buf_addr, 32, 32, + FTGMAC100_TXDES2_TXBUF_BADR_HI(bd.des2)); + } + if (dma_memory_read(&address_space_memory, buf_addr, ptr, len, MEMTXATTRS_UNSPECIFIED)) { qemu_log_mask(LOG_GUEST_ERROR, "%s: failed to read packet @ 0x%x\n", __func__, bd.des3); @@ -XXX,XX +XXX,XX @@ static ssize_t ftgmac100_receive(NetClientState *nc, const uint8_t *buf, uint32_t flags = 0; uint64_t addr; uint32_t crc; - uint32_t buf_addr; + uint64_t buf_addr = 0; uint8_t *crc_ptr; uint32_t buf_len; size_t size = len; @@ -XXX,XX +XXX,XX @@ static ssize_t ftgmac100_receive(NetClientState *nc, const uint8_t *buf, if (size < 4) { buf_len += size - 4; } + buf_addr = bd.des3; + if (s->dma64) { + buf_addr = deposit64(buf_addr, 32, 32, + FTGMAC100_RXDES2_RXBUF_BADR_HI(bd.des2)); + } if (first && proto == ETH_P_VLAN && buf_len >= 18) { bd.des1 = lduw_be_p(buf + 14) | FTGMAC100_RXDES1_VLANTAG_AVAIL; -- 2.45.2 From: Jamin Lin <jamin_lin@aspeedtech.com> ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35) And the base address of dram is "0x4 00000000" which is 64bits address. Set dma64 property for ftgmac100 model to support 64bits dram address DMA. Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> --- hw/arm/aspeed_ast27x0.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/hw/arm/aspeed_ast27x0.c b/hw/arm/aspeed_ast27x0.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_ast27x0.c +++ b/hw/arm/aspeed_ast27x0.c @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_ast2700_realize(DeviceState *dev, Error **errp) return; } + /* Net */ for (i = 0; i < sc->macs_num; i++) { object_property_set_bool(OBJECT(&s->ftgmac100[i]), "aspeed", true, &error_abort); + object_property_set_bool(OBJECT(&s->ftgmac100[i]), "dma64", true, + &error_abort); if (!sysbus_realize(SYS_BUS_DEVICE(&s->ftgmac100[i]), errp)) { return; } -- 2.45.2 From: Jamin Lin <jamin_lin@aspeedtech.com> According to the w25q01jv datasheet at page 16, it is required to set QE bit in "Status Register 2". Besides, users are able to utilize "Write Status Register 1(0x01)" command to set QE bit in "Status Register 2" and utilize "Read Status Register 2(0x35)" command to get the QE bit status. To support quad mode for w25q01jvq, update collecting data needed 2 bytes for WRSR command in decode_new_cmd function and verify QE bit at the second byte of collecting data bit 2 in complete_collecting_data. Update RDCR_EQIO command to set bit 2 of return data if quad mode enable in decode_new_cmd. Signed-off-by: Troy Lee <troy_lee@aspeedtech.com> Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> --- hw/block/m25p80.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/hw/block/m25p80.c b/hw/block/m25p80.c index XXXXXXX..XXXXXXX 100644 --- a/hw/block/m25p80.c +++ b/hw/block/m25p80.c @@ -XXX,XX +XXX,XX @@ typedef enum { /* * Micron: 0x35 - enable QPI * Spansion: 0x35 - read control register + * Winbond: 0x35 - quad enable */ RDCR_EQIO = 0x35, RSTQIO = 0xf5, @@ -XXX,XX +XXX,XX @@ static void complete_collecting_data(Flash *s) s->four_bytes_address_mode = extract32(s->data[1], 5, 1); } break; + case MAN_WINBOND: + if (s->len > 1) { + s->quad_enable = !!(s->data[1] & 0x02); + } + break; default: break; } @@ -XXX,XX +XXX,XX @@ static void decode_new_cmd(Flash *s, uint32_t value) s->needed_bytes = 2; s->state = STATE_COLLECTING_VAR_LEN_DATA; break; + case MAN_WINBOND: + s->needed_bytes = 2; + s->state = STATE_COLLECTING_VAR_LEN_DATA; + break; default: s->needed_bytes = 1; s->state = STATE_COLLECTING_DATA; @@ -XXX,XX +XXX,XX @@ static void decode_new_cmd(Flash *s, uint32_t value) case MAN_MACRONIX: s->quad_enable = true; break; + case MAN_WINBOND: + s->data[0] = (!!s->quad_enable) << 1; + s->pos = 0; + s->len = 1; + s->state = STATE_READING_DATA; + break; default: break; } -- 2.45.2 From: Jamin Lin <jamin_lin@aspeedtech.com> Update test case to test ASPEED OpenBMC SDK v09.02 for AST2700. ASPEED fixed TX mask issue from linux/drivers/ftgmac100.c. It is required to use ASPEED OpenBMC SDK since v09.02 for AST2700 QEMU network testing. A test image is downloaded from the ASPEED Forked OpenBMC GitHub release repository : https://github.com/AspeedTech-BMC/openbmc/releases/ Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> --- tests/avocado/machine_aspeed.py | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/tests/avocado/machine_aspeed.py b/tests/avocado/machine_aspeed.py index XXXXXXX..XXXXXXX 100644 --- a/tests/avocado/machine_aspeed.py +++ b/tests/avocado/machine_aspeed.py @@ -XXX,XX +XXX,XX @@ def test_arm_ast2600_evb_sdk(self): year = time.strftime("%Y") self.ssh_command_output_contains('/sbin/hwclock -f /dev/rtc1', year); - def test_aarch64_ast2700_evb_sdk_v09_01(self): + def test_aarch64_ast2700_evb_sdk_v09_02(self): """ :avocado: tags=arch:aarch64 :avocado: tags=machine:ast2700-evb """ image_url = ('https://github.com/AspeedTech-BMC/openbmc/releases/' - 'download/v09.01/ast2700-default-obmc.tar.gz') - image_hash = 'b1cc0fd73c7650d34c9c8459a243f52a91e9e27144b8608b2645ab19461d1e07' + 'download/v09.02/ast2700-default-obmc.tar.gz') + image_hash = 'ac969c2602f4e6bdb69562ff466b89ae3fe1d86e1f6797bb7969d787f82116a7' image_path = self.fetch_asset(image_url, asset_hash=image_hash, algorithm='sha256') archive.extract(image_path, self.workdir) -- 2.45.2 From: Jamin Lin <jamin_lin@aspeedtech.com> Update test case to test network connection via SSH. Test command: ``` cd build pyvenv/bin/avocado run ../qemu/tests/avocado/machine_aspeed.py:AST2x00MachineSDK.test_aarch64_ast2700_evb_sdk_v09_02 ``` Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> --- tests/avocado/machine_aspeed.py | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/tests/avocado/machine_aspeed.py b/tests/avocado/machine_aspeed.py index XXXXXXX..XXXXXXX 100644 --- a/tests/avocado/machine_aspeed.py +++ b/tests/avocado/machine_aspeed.py @@ -XXX,XX +XXX,XX @@ def do_test_arm_aspeed_sdk_start(self, image): def do_test_aarch64_aspeed_sdk_start(self, image): self.vm.set_console() - self.vm.add_args('-drive', 'file=' + image + ',if=mtd,format=raw') + self.vm.add_args('-drive', 'file=' + image + ',if=mtd,format=raw', + '-net', 'nic', '-net', 'user,hostfwd=:127.0.0.1:0-:22') self.vm.launch() self.wait_for_console_pattern('U-Boot 2023.10') self.wait_for_console_pattern('## Loading kernel from FIT Image') self.wait_for_console_pattern('Starting kernel ...') - self.wait_for_console_pattern("systemd[1]: Hostname set to") @skipUnless(os.getenv('QEMU_TEST_FLAKY_TESTS'), 'Test is unstable on GitLab') @@ -XXX,XX +XXX,XX @@ def test_aarch64_ast2700_evb_sdk_v09_02(self): self.vm.add_args('-smp', str(num_cpu)) self.do_test_aarch64_aspeed_sdk_start(image_dir + 'image-bmc') + self.wait_for_console_pattern('nodistro.0 ast2700-default ttyS12') + self.ssh_connect('root', '0penBmc', False) -- 2.45.2 The following changes since commit c77283dd5d79149f4e7e9edd00f65416c648ee59: Merge tag 'pull-request-2025-07-02' of https://gitlab.com/thuth/qemu into staging (2025-07-03 06:01:41 -0400) are available in the Git repository at: https://github.com/legoater/qemu/ tags/pull-aspeed-20250704 for you to fetch changes up to 3a34dad2c0d25cebafed40696bbbdeb7ff4b9c7d: tests/functional: Add gb200 tests (2025-07-03 17:36:45 +0200) ---------------------------------------------------------------- aspeed queue: * Improved AST2700 SoC modeling (SDMC, SCU) * Fixed hardware strapping of 'bletchley-bmc' machine * Added new Meta 'catalina-bmc' machine and functional test using OpenBMC * Improved AST2600 SCU protection key modeling * Introduced AST2600 SCU unit tests * Deprecated 'ast2700a0-evb' machine * Added new NVIDIA 'gb200-bmc' machine and functional test using OpenBMC ---------------------------------------------------------------- Ed Tanous (4): hw/arm/aspeed: Add second SPI chip to Aspeed model docs: add support for gb200-bmc hw/arm/aspeed: Add GB200 BMC target tests/functional: Add gb200 tests Jamin Lin (3): hw/misc/aspeed_sdmc: Skipping dram_init in u-boot for AST2700 hw/misc/aspeed_scu: Support the Frequency Counter Control register for AST2700 aspeed: Deprecate the ast2700a0-evb machine Patrick Williams (2): hw/arm/aspeed: bletchley: update hw strap values hw/arm/aspeed: add Catalina machine type Tan Siewert (2): hw/misc/aspeed_scu: Handle AST2600 protection key registers correctly tests/qtest: Add test for ASPEED SCU docs/about/deprecated.rst | 8 + docs/system/arm/aspeed.rst | 4 +- hw/arm/aspeed_eeprom.h | 3 + include/hw/arm/aspeed.h | 2 + hw/arm/aspeed.c | 285 ++++++++++++++++++++++- hw/arm/aspeed_eeprom.c | 21 ++ hw/misc/aspeed_scu.c | 22 +- hw/misc/aspeed_sdmc.c | 3 + tests/qtest/aspeed_scu-test.c | 231 ++++++++++++++++++ hw/arm/Kconfig | 1 + tests/functional/aspeed.py | 9 +- tests/functional/meson.build | 4 + tests/functional/test_arm_aspeed_catalina.py | 25 ++ tests/functional/test_arm_aspeed_gb200nvl_bmc.py | 26 +++ tests/qtest/meson.build | 1 + 15 files changed, 636 insertions(+), 9 deletions(-) create mode 100644 tests/qtest/aspeed_scu-test.c create mode 100755 tests/functional/test_arm_aspeed_catalina.py create mode 100644 tests/functional/test_arm_aspeed_gb200nvl_bmc.py From: Jamin Lin <jamin_lin@aspeedtech.com> On AST2700 SoC, QEMU now sets BIT6 in VGA0 SCRATCH register to indicate that DDR training has completed, thus skipping the dram_init(). To align with the recent U-Boot changes, where the Main Control Register's BIT16 is checked to skip the dram_init() process, this patch sets BIT16 in the SDMC Main Control Register at reset time. This allows both the main U-Boot stage to correctly detect and bypass DRAM initialization when running under QEMU. Reference: - QEMU: https://github.com/qemu/qemu/commit/2d082fea485ee455a70ed3e963cdf9a70f34858a - U-Boot: https://github.com/AspeedTech-BMC/u-boot/commit/94e5435504fb0d8888f5c1bfd3fa284cdd6aaf9b Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Link: https://lore.kernel.org/qemu-devel/20250618080006.846355-2-jamin_lin@aspeedtech.com Signed-off-by: Cédric Le Goater <clg@redhat.com> --- hw/misc/aspeed_sdmc.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/hw/misc/aspeed_sdmc.c b/hw/misc/aspeed_sdmc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/aspeed_sdmc.c +++ b/hw/misc/aspeed_sdmc.c @@ -XXX,XX +XXX,XX @@ static void aspeed_2700_sdmc_reset(DeviceState *dev) /* Set ram size bit and defaults values */ s->regs[R_MAIN_CONF] = asc->compute_conf(s, 0); + /* Skipping dram init */ + s->regs[R_MAIN_CONTROL] = BIT(16); + if (s->unlocked) { s->regs[R_2700_PROT] = PROT_UNLOCKED; } -- 2.50.0 From: Jamin Lin <jamin_lin@aspeedtech.com> According to the datasheet: BIT[1] (SCU_FREQ_OSC_EN) enables the oscillator frequency measurement counter. BIT[6] (SCU_FREQ_DONE) indicates the measurement is finished. Firmware polls BIT[6] to determine when measurement is complete. The flag can be cleared by writing BIT[1] to 0. To simulate this hardware behavior in QEMU: If BIT[1] is set to 1, BIT[6] is immediately set to 1 to avoid firmware hanging during polling. If BIT[1] is cleared to 0, BIT[6] is also cleared to 0 to match hardware semantics. The initial value of this register is initialized to 0x80, reflecting the default value confirmed from an EVB register dump. Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Link: https://lore.kernel.org/qemu-devel/20250618080006.846355-3-jamin_lin@aspeedtech.com Signed-off-by: Cédric Le Goater <clg@redhat.com> --- hw/misc/aspeed_scu.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/hw/misc/aspeed_scu.c b/hw/misc/aspeed_scu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/aspeed_scu.c +++ b/hw/misc/aspeed_scu.c @@ -XXX,XX +XXX,XX @@ #define AST2700_SCUIO_UARTCLK_GEN TO_REG(0x330) #define AST2700_SCUIO_HUARTCLK_GEN TO_REG(0x334) #define AST2700_SCUIO_CLK_DUTY_MEAS_RST TO_REG(0x388) +#define AST2700_SCUIO_FREQ_CNT_CTL TO_REG(0x3A0) #define SCU_IO_REGION_SIZE 0x1000 @@ -XXX,XX +XXX,XX @@ static void aspeed_ast2700_scuio_write(void *opaque, hwaddr offset, s->regs[reg - 1] ^= data; updated = true; break; + case AST2700_SCUIO_FREQ_CNT_CTL: + s->regs[reg] = deposit32(s->regs[reg], 6, 1, !!(data & BIT(1))); + updated = true; + break; default: qemu_log_mask(LOG_GUEST_ERROR, "%s: Unhandled write at offset 0x%" HWADDR_PRIx "\n", @@ -XXX,XX +XXX,XX @@ static const uint32_t ast2700_a0_resets_io[ASPEED_AST2700_SCU_NR_REGS] = { [AST2700_SCUIO_UARTCLK_GEN] = 0x00014506, [AST2700_SCUIO_HUARTCLK_GEN] = 0x000145c0, [AST2700_SCUIO_CLK_DUTY_MEAS_RST] = 0x0c9100d2, + [AST2700_SCUIO_FREQ_CNT_CTL] = 0x00000080, }; static void aspeed_2700_scuio_class_init(ObjectClass *klass, const void *data) -- 2.50.0 From: Patrick Williams <patrick@stwcx.xyz> Update the Bletchley hardware strap register values per actual hardware: ``` root@bmc:~# devmem 0x1e6e2500 0x00002000 root@bmc:~# devmem 0x1e6e2510 0x00000801 ``` Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Reviewed-by: Cédric Le Goater <clg@redhat.com> Link: https://lore.kernel.org/qemu-devel/20250619035850.2682690-1-patrick@stwcx.xyz Signed-off-by: Cédric Le Goater <clg@redhat.com> --- hw/arm/aspeed.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ struct AspeedMachineState { #define FUJI_BMC_HW_STRAP2 0x00000000 /* Bletchley hardware value */ -/* TODO: Leave same as EVB for now. */ -#define BLETCHLEY_BMC_HW_STRAP1 AST2600_EVB_HW_STRAP1 -#define BLETCHLEY_BMC_HW_STRAP2 AST2600_EVB_HW_STRAP2 +#define BLETCHLEY_BMC_HW_STRAP1 0x00002000 +#define BLETCHLEY_BMC_HW_STRAP2 0x00000801 /* Qualcomm DC-SCM hardware value */ #define QCOM_DC_SCM_V1_BMC_HW_STRAP1 0x00000000 -- 2.50.0 From: Patrick Williams <patrick@stwcx.xyz> Add the 'catalina-bmc' machine type based on the kernel DTS[1] as of 6.16-rc2. The i2c model is as complete as the current QEMU models support, but in some cases I substituted devices that are close enough for present functionality. Strap registers are were verified with hardware. This has been tested with an openbmc image built from [2]. Add a functional test in line with Bletchley, pointing at an image obtained from the OpenBMC Jenkins server. [1]: https://github.com/torvalds/linux/blob/v6.16-rc2/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts [2]: https://github.com/openbmc/openbmc/commit/5bc73ec261f981d5e586bda5ac78eb0cbd5f92b0 Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Reviewed-by: Cédric Le Goater <clg@redhat.com> Link: https://lore.kernel.org/qemu-devel/20250619151458.2831859-1-patrick@stwcx.xyz Signed-off-by: Cédric Le Goater <clg@redhat.com> --- hw/arm/aspeed.c | 200 +++++++++++++++++++ hw/arm/Kconfig | 1 + tests/functional/meson.build | 2 + tests/functional/test_arm_aspeed_catalina.py | 25 +++ 4 files changed, 228 insertions(+) create mode 100755 tests/functional/test_arm_aspeed_catalina.py diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ #include "hw/i2c/i2c_mux_pca954x.h" #include "hw/i2c/smbus_eeprom.h" #include "hw/gpio/pca9552.h" +#include "hw/gpio/pca9554.h" #include "hw/nvram/eeprom_at24c.h" #include "hw/sensor/tmp105.h" #include "hw/misc/led.h" @@ -XXX,XX +XXX,XX @@ static void fuji_bmc_i2c_init(AspeedMachineState *bmc) } #define TYPE_TMP421 "tmp421" +#define TYPE_DS1338 "ds1338" + +/* Catalina hardware value */ +#define CATALINA_BMC_HW_STRAP1 0x00002002 +#define CATALINA_BMC_HW_STRAP2 0x00000800 + +#define CATALINA_BMC_RAM_SIZE ASPEED_RAM_SIZE(2 * GiB) + +static void catalina_bmc_i2c_init(AspeedMachineState *bmc) +{ + /* Reference from v6.16-rc2 aspeed-bmc-facebook-catalina.dts */ + + AspeedSoCState *soc = bmc->soc; + I2CBus *i2c[16] = {}; + I2CSlave *i2c_mux; + + /* busses 0-15 are all used. */ + for (int i = 0; i < ARRAY_SIZE(i2c); i++) { + i2c[i] = aspeed_i2c_get_bus(&soc->i2c, i); + } + + /* &i2c0 */ + /* i2c-mux@71 (PCA9546) on i2c0 */ + i2c_slave_create_simple(i2c[0], TYPE_PCA9546, 0x71); + + /* i2c-mux@72 (PCA9546) on i2c0 */ + i2c_mux = i2c_slave_create_simple(i2c[0], TYPE_PCA9546, 0x72); + + /* i2c0mux1ch1 */ + /* io_expander7 - pca9535@20 */ + i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 1), + TYPE_PCA9552, 0x20); + /* eeprom@50 */ + at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 1), 0x50, 8 * KiB); + + /* i2c-mux@73 (PCA9546) on i2c0 */ + i2c_slave_create_simple(i2c[0], TYPE_PCA9546, 0x73); + + /* i2c-mux@75 (PCA9546) on i2c0 */ + i2c_slave_create_simple(i2c[0], TYPE_PCA9546, 0x75); + + /* i2c-mux@76 (PCA9546) on i2c0 */ + i2c_mux = i2c_slave_create_simple(i2c[0], TYPE_PCA9546, 0x76); + + /* i2c0mux4ch1 */ + /* io_expander8 - pca9535@21 */ + i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 1), + TYPE_PCA9552, 0x21); + /* eeprom@50 */ + at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 1), 0x50, 8 * KiB); + + /* i2c-mux@77 (PCA9546) on i2c0 */ + i2c_slave_create_simple(i2c[0], TYPE_PCA9546, 0x77); + + + /* &i2c1 */ + /* i2c-mux@70 (PCA9548) on i2c1 */ + i2c_mux = i2c_slave_create_simple(i2c[1], TYPE_PCA9548, 0x70); + /* i2c1mux0ch0 */ + /* ina238@41 - no model */ + /* ina238@42 - no model */ + /* ina238@44 - no model */ + /* i2c1mux0ch1 */ + /* ina238@41 - no model */ + /* ina238@43 - no model */ + /* i2c1mux0ch4 */ + /* ltc4287@42 - no model */ + /* ltc4287@43 - no model */ + + /* i2c1mux0ch5 */ + /* eeprom@54 */ + at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 5), 0x54, 8 * KiB); + /* tpm75@4f */ + i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 5), TYPE_TMP75, 0x4f); + + /* i2c1mux0ch6 */ + /* io_expander5 - pca9554@27 */ + i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 6), + TYPE_PCA9554, 0x27); + /* io_expander6 - pca9555@25 */ + i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 6), + TYPE_PCA9552, 0x25); + /* eeprom@51 */ + at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 6), 0x51, 8 * KiB); + + /* i2c1mux0ch7 */ + /* eeprom@53 */ + at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 7), 0x53, 8 * KiB); + /* temperature-sensor@4b - tmp75 */ + i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 7), TYPE_TMP75, 0x4b); + + /* &i2c2 */ + /* io_expander0 - pca9555@20 */ + i2c_slave_create_simple(i2c[2], TYPE_PCA9552, 0x20); + /* io_expander0 - pca9555@21 */ + i2c_slave_create_simple(i2c[2], TYPE_PCA9552, 0x21); + /* io_expander0 - pca9555@27 */ + i2c_slave_create_simple(i2c[2], TYPE_PCA9552, 0x27); + /* eeprom@50 */ + at24c_eeprom_init(i2c[2], 0x50, 8 * KiB); + /* eeprom@51 */ + at24c_eeprom_init(i2c[2], 0x51, 8 * KiB); + + /* &i2c5 */ + /* i2c-mux@70 (PCA9548) on i2c5 */ + i2c_mux = i2c_slave_create_simple(i2c[5], TYPE_PCA9548, 0x70); + /* i2c5mux0ch6 */ + /* eeprom@52 */ + at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 6), 0x52, 8 * KiB); + /* i2c5mux0ch7 */ + /* ina230@40 - no model */ + /* ina230@41 - no model */ + /* ina230@44 - no model */ + /* ina230@45 - no model */ + + /* &i2c6 */ + /* io_expander3 - pca9555@21 */ + i2c_slave_create_simple(i2c[6], TYPE_PCA9552, 0x21); + /* rtc@6f - nct3018y */ + i2c_slave_create_simple(i2c[6], TYPE_DS1338, 0x6f); + + /* &i2c9 */ + /* io_expander4 - pca9555@4f */ + i2c_slave_create_simple(i2c[9], TYPE_PCA9552, 0x4f); + /* temperature-sensor@4b - tpm75 */ + i2c_slave_create_simple(i2c[9], TYPE_TMP75, 0x4b); + /* eeprom@50 */ + at24c_eeprom_init(i2c[9], 0x50, 8 * KiB); + /* eeprom@56 */ + at24c_eeprom_init(i2c[9], 0x56, 8 * KiB); + + /* &i2c10 */ + /* temperature-sensor@1f - tpm421 */ + i2c_slave_create_simple(i2c[10], TYPE_TMP421, 0x1f); + /* eeprom@50 */ + at24c_eeprom_init(i2c[10], 0x50, 8 * KiB); + + /* &i2c11 */ + /* ssif-bmc@10 - no model */ + + /* &i2c12 */ + /* eeprom@50 */ + at24c_eeprom_init(i2c[12], 0x50, 8 * KiB); + + /* &i2c13 */ + /* eeprom@50 */ + at24c_eeprom_init(i2c[13], 0x50, 8 * KiB); + /* eeprom@54 */ + at24c_eeprom_init(i2c[13], 0x54, 256); + /* eeprom@55 */ + at24c_eeprom_init(i2c[13], 0x55, 256); + /* eeprom@57 */ + at24c_eeprom_init(i2c[13], 0x57, 256); + + /* &i2c14 */ + /* io_expander9 - pca9555@10 */ + i2c_slave_create_simple(i2c[14], TYPE_PCA9552, 0x10); + /* io_expander10 - pca9555@11 */ + i2c_slave_create_simple(i2c[14], TYPE_PCA9552, 0x11); + /* io_expander11 - pca9555@12 */ + i2c_slave_create_simple(i2c[14], TYPE_PCA9552, 0x12); + /* io_expander12 - pca9555@13 */ + i2c_slave_create_simple(i2c[14], TYPE_PCA9552, 0x13); + /* io_expander13 - pca9555@14 */ + i2c_slave_create_simple(i2c[14], TYPE_PCA9552, 0x14); + /* io_expander14 - pca9555@15 */ + i2c_slave_create_simple(i2c[14], TYPE_PCA9552, 0x15); + + /* &i2c15 */ + /* temperature-sensor@1f - tmp421 */ + i2c_slave_create_simple(i2c[15], TYPE_TMP421, 0x1f); + /* eeprom@52 */ + at24c_eeprom_init(i2c[15], 0x52, 8 * KiB); +} static void bletchley_bmc_i2c_init(AspeedMachineState *bmc) { @@ -XXX,XX +XXX,XX @@ static void aspeed_machine_bletchley_class_init(ObjectClass *oc, aspeed_machine_class_init_cpus_defaults(mc); } +static void aspeed_machine_catalina_class_init(ObjectClass *oc, + const void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); + + mc->desc = "Facebook Catalina BMC (Cortex-A7)"; + amc->soc_name = "ast2600-a3"; + amc->hw_strap1 = CATALINA_BMC_HW_STRAP1; + amc->hw_strap2 = CATALINA_BMC_HW_STRAP2; + amc->fmc_model = "w25q01jvq"; + amc->spi_model = NULL; + amc->num_cs = 2; + amc->macs_mask = ASPEED_MAC2_ON; + amc->i2c_init = catalina_bmc_i2c_init; + mc->auto_create_sdcard = true; + mc->default_ram_size = CATALINA_BMC_RAM_SIZE; + aspeed_machine_class_init_cpus_defaults(mc); + aspeed_machine_ast2600_class_emmc_init(oc); +} + static void fby35_reset(MachineState *state, ResetType type) { AspeedMachineState *bmc = ASPEED_MACHINE(state); @@ -XXX,XX +XXX,XX @@ static const TypeInfo aspeed_machine_types[] = { .name = MACHINE_TYPE_NAME("bletchley-bmc"), .parent = TYPE_ASPEED_MACHINE, .class_init = aspeed_machine_bletchley_class_init, + }, { + .name = MACHINE_TYPE_NAME("catalina-bmc"), + .parent = TYPE_ASPEED_MACHINE, + .class_init = aspeed_machine_catalina_class_init, }, { .name = MACHINE_TYPE_NAME("fby35-bmc"), .parent = MACHINE_TYPE_NAME("ast2600-evb"), diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ASPEED_SOC select I2C select DPS310 select PCA9552 + select PCA9554 select SERIAL_MM select SMBUS_EEPROM select PCA954X diff --git a/tests/functional/meson.build b/tests/functional/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/functional/meson.build +++ b/tests/functional/meson.build @@ -XXX,XX +XXX,XX @@ test_timeouts = { 'arm_aspeed_ast2500' : 720, 'arm_aspeed_ast2600' : 1200, 'arm_aspeed_bletchley' : 480, + 'arm_aspeed_catalina' : 480, 'arm_aspeed_rainier' : 480, 'arm_bpim2u' : 500, 'arm_collie' : 180, @@ -XXX,XX +XXX,XX @@ tests_arm_system_thorough = [ 'arm_aspeed_ast2500', 'arm_aspeed_ast2600', 'arm_aspeed_bletchley', + 'arm_aspeed_catalina', 'arm_aspeed_rainier', 'arm_bpim2u', 'arm_canona1100', diff --git a/tests/functional/test_arm_aspeed_catalina.py b/tests/functional/test_arm_aspeed_catalina.py new file mode 100755 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/functional/test_arm_aspeed_catalina.py @@ -XXX,XX +XXX,XX @@ +#!/usr/bin/env python3 +# +# Functional test that boots the ASPEED machines +# +# SPDX-License-Identifier: GPL-2.0-or-later + +from qemu_test import Asset +from aspeed import AspeedTest + + +class CatalinaMachine(AspeedTest): + + ASSET_CATALINA_FLASH = Asset( + 'https://github.com/legoater/qemu-aspeed-boot/raw/a866feb5ef81245b4827a214584bf6bcc72939f6/images/catalina-bmc/obmc-phosphor-image-catalina-20250619123021.static.mtd.xz', + '287402e1ba021991e06be1d098f509444a02a3d81a73a932f66528b159e864f9') + + def test_arm_ast2600_catalina_openbmc(self): + image_path = self.uncompress(self.ASSET_CATALINA_FLASH) + + self.do_test_arm_aspeed_openbmc('catalina-bmc', image=image_path, + uboot='2019.04', cpu_id='0xf00', + soc='AST2600 rev A3') + +if __name__ == '__main__': + AspeedTest.main() -- 2.50.0 From: Tan Siewert <tan@siewert.io> The AST2600 SCU has two protection key registers (0x00 and 0x10) that both need to be unlocked. (Un-)locking 0x00 modifies both protection key registers, while modifying 0x10 only modifies itself. This commit updates the SCU write logic to reject writes unless both protection key registers are unlocked, matching the behaviour of real hardware. Signed-off-by: Tan Siewert <tan@siewert.io> Reviewed-by: Jamin Lin <jamin_lin@aspeedtech.com> Link: https://lore.kernel.org/qemu-devel/20250619085329.42125-1-tan@siewert.io Signed-off-by: Cédric Le Goater <clg@redhat.com> --- hw/misc/aspeed_scu.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/hw/misc/aspeed_scu.c b/hw/misc/aspeed_scu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/aspeed_scu.c +++ b/hw/misc/aspeed_scu.c @@ -XXX,XX +XXX,XX @@ #define BMC_DEV_ID TO_REG(0x1A4) #define AST2600_PROT_KEY TO_REG(0x00) +#define AST2600_PROT_KEY2 TO_REG(0x10) #define AST2600_SILICON_REV TO_REG(0x04) #define AST2600_SILICON_REV2 TO_REG(0x14) #define AST2600_SYS_RST_CTRL TO_REG(0x40) @@ -XXX,XX +XXX,XX @@ static void aspeed_ast2600_scu_write(void *opaque, hwaddr offset, int reg = TO_REG(offset); /* Truncate here so bitwise operations below behave as expected */ uint32_t data = data64; + bool prot_data_state = data == ASPEED_SCU_PROT_KEY; + bool unlocked = s->regs[AST2600_PROT_KEY] && s->regs[AST2600_PROT_KEY2]; if (reg >= ASPEED_AST2600_SCU_NR_REGS) { qemu_log_mask(LOG_GUEST_ERROR, @@ -XXX,XX +XXX,XX @@ static void aspeed_ast2600_scu_write(void *opaque, hwaddr offset, return; } - if (reg > PROT_KEY && !s->regs[PROT_KEY]) { + if ((reg != AST2600_PROT_KEY && reg != AST2600_PROT_KEY2) && !unlocked) { qemu_log_mask(LOG_GUEST_ERROR, "%s: SCU is locked!\n", __func__); + return; } trace_aspeed_scu_write(offset, size, data); switch (reg) { case AST2600_PROT_KEY: - s->regs[reg] = (data == ASPEED_SCU_PROT_KEY) ? 1 : 0; + /* + * Writing a value to SCU000 will modify both protection + * registers to each protection register individually. + */ + s->regs[AST2600_PROT_KEY] = prot_data_state; + s->regs[AST2600_PROT_KEY2] = prot_data_state; + return; + case AST2600_PROT_KEY2: + s->regs[AST2600_PROT_KEY2] = prot_data_state; return; case AST2600_HW_STRAP1: case AST2600_HW_STRAP2: -- 2.50.0 From: Tan Siewert <tan@siewert.io> This adds basic tests for the ASPEED System Control Unit (SCU) and its protection mechanism on the AST2500 and AST2600 platforms. The tests verify: - That SCU protection registers can be unlocked and locked again - That modifying the primary protection register on AST2600 also affects the secondary one - That writes to protected SCU registers are blocked unless protection registers are unlocked explicitly These tests ensure proper emulation of hardware locking behaviour and help catch regressions in SCU access logic. Signed-off-by: Tan Siewert <tan@siewert.io> Reviewed-by: Cédric Le Goater <clg@redhat.com> Link: https://lore.kernel.org/qemu-devel/20250630112646.74944-1-tan@siewert.io [ clg: Reordered file list in meson.build ] Signed-off-by: Cédric Le Goater <clg@redhat.com> --- tests/qtest/aspeed_scu-test.c | 231 ++++++++++++++++++++++++++++++++++ tests/qtest/meson.build | 1 + 2 files changed, 232 insertions(+) create mode 100644 tests/qtest/aspeed_scu-test.c diff --git a/tests/qtest/aspeed_scu-test.c b/tests/qtest/aspeed_scu-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/aspeed_scu-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the ASPEED AST2500 and AST2600 SCU. + * + * SPDX-License-Identifier: GPL-2.0-or-later + * Copyright (C) 2025 Tan Siewert + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +/* + * SCU base, as well as protection key are + * the same on AST2500 and 2600. + */ +#define AST_SCU_BASE 0x1E6E2000 +#define AST_SCU_PROT_LOCK_STATE 0x0 +#define AST_SCU_PROT_LOCK_VALUE 0x2 +#define AST_SCU_PROT_UNLOCK_STATE 0x1 +#define AST_SCU_PROT_UNLOCK_VALUE 0x1688A8A8 + +#define AST2500_MACHINE "-machine ast2500-evb" +#define AST2500_SCU_PROT_REG 0x00 +#define AST2500_SCU_MISC_2_CONTROL_REG 0x4C + +#define AST2600_MACHINE "-machine ast2600-evb" +/* AST2600 has two protection registers */ +#define AST2600_SCU_PROT_REG 0x000 +#define AST2600_SCU_PROT_REG2 0x010 +#define AST2600_SCU_MISC_2_CONTROL_REG 0x0C4 + +#define TEST_LOCK_ARBITRARY_VALUE 0xABCDEFAB + +/** + * Assert that a given register matches an expected value. + * + * Reads the register and checks if its value equals the expected value. + * + * @param *s - QTest machine state + * @param reg - Address of the register to be checked + * @param expected - Expected register value + */ +static inline void assert_register_eq(QTestState *s, + uint32_t reg, + uint32_t expected) +{ + uint32_t value = qtest_readl(s, reg); + g_assert_cmphex(value, ==, expected); +} + +/** + * Assert that a given register does not match a specific value. + * + * Reads the register and checks that its value is not equal to the + * provided value. + * + * @param *s - QTest machine state + * @param reg - Address of the register to be checked + * @param not_expected - Value the register must not contain + */ +static inline void assert_register_neq(QTestState *s, + uint32_t reg, + uint32_t not_expected) +{ + uint32_t value = qtest_readl(s, reg); + g_assert_cmphex(value, !=, not_expected); +} + +/** + * Test whether the SCU can be locked and unlocked correctly. + * + * When testing multiple registers, this function assumes that writing + * to the first register also affects the others. However, writing to + * any other register only affects itself. + * + * @param *machine - input machine configuration, passed directly + * to QTest + * @param regs[] - List of registers to be checked + * @param regc - amount of arguments for registers to be checked + */ +static void test_protection_register(const char *machine, + const uint32_t regs[], + const int regc) +{ + QTestState *s = qtest_init(machine); + + for (int i = 0; i < regc; i++) { + uint32_t reg = regs[i]; + + qtest_writel(s, reg, AST_SCU_PROT_UNLOCK_VALUE); + assert_register_eq(s, reg, AST_SCU_PROT_UNLOCK_STATE); + + /** + * Check that other registers are unlocked too, if more + * than one is available. + */ + if (regc > 1 && i == 0) { + /* Initialise at 1 instead of 0 to skip first */ + for (int j = 1; j < regc; j++) { + uint32_t add_reg = regs[j]; + assert_register_eq(s, add_reg, AST_SCU_PROT_UNLOCK_STATE); + } + } + + /* Lock the register again */ + qtest_writel(s, reg, AST_SCU_PROT_LOCK_VALUE); + assert_register_eq(s, reg, AST_SCU_PROT_LOCK_STATE); + + /* And the same for locked state */ + if (regc > 1 && i == 0) { + /* Initialise at 1 instead of 0 to skip first */ + for (int j = 1; j < regc; j++) { + uint32_t add_reg = regs[j]; + assert_register_eq(s, add_reg, AST_SCU_PROT_LOCK_STATE); + } + } + } + + qtest_quit(s); +} + +static void test_2500_protection_register(void) +{ + uint32_t regs[] = { AST_SCU_BASE + AST2500_SCU_PROT_REG }; + + test_protection_register(AST2500_MACHINE, + regs, + ARRAY_SIZE(regs)); +} + +static void test_2600_protection_register(void) +{ + /** + * The AST2600 has two protection registers, both + * being required to be unlocked to do any operation. + * + * Modifying SCU000 also modifies SCU010, but modifying + * SCU010 only will keep SCU000 untouched. + */ + uint32_t regs[] = { AST_SCU_BASE + AST2600_SCU_PROT_REG, + AST_SCU_BASE + AST2600_SCU_PROT_REG2 }; + + test_protection_register(AST2600_MACHINE, + regs, + ARRAY_SIZE(regs)); +} + +/** + * Test if SCU register writes are correctly allowed or blocked + * depending on the protection register state. + * + * The test first locks the protection register and verifies that + * writes to the target SCU register are rejected. It then unlocks + * the protection register and confirms that the written value is + * retained when unlocked. + * + * @param *machine - input machine configuration, passed directly + * to QTest + * @param protection_register - first SCU protection key register + * (only one for keeping it simple) + * @param test_register - Register to be used for writing arbitrary + * values + */ +static void test_write_permission_lock_state(const char *machine, + const uint32_t protection_register, + const uint32_t test_register) +{ + QTestState *s = qtest_init(machine); + + /* Arbitrary value to lock provided SCU protection register */ + qtest_writel(s, protection_register, AST_SCU_PROT_LOCK_VALUE); + + /* Ensure that the SCU is really locked */ + assert_register_eq(s, protection_register, AST_SCU_PROT_LOCK_STATE); + + /* Write a known arbitrary value to test that the write is blocked */ + qtest_writel(s, test_register, TEST_LOCK_ARBITRARY_VALUE); + + /* We do not want to have the written value to be saved */ + assert_register_neq(s, test_register, TEST_LOCK_ARBITRARY_VALUE); + + /** + * Unlock the SCU and verify that it can be written to. + * Assumes that the first SCU protection register is sufficient to + * unlock all protection registers, if multiple are present. + */ + qtest_writel(s, protection_register, AST_SCU_PROT_UNLOCK_VALUE); + assert_register_eq(s, protection_register, AST_SCU_PROT_UNLOCK_STATE); + + /* Write a known arbitrary value to test that the write works */ + qtest_writel(s, test_register, TEST_LOCK_ARBITRARY_VALUE); + + /* Ensure that the written value is retained */ + assert_register_eq(s, test_register, TEST_LOCK_ARBITRARY_VALUE); + + qtest_quit(s); +} + +static void test_2500_write_permission_lock_state(void) +{ + test_write_permission_lock_state( + AST2500_MACHINE, + AST_SCU_BASE + AST2500_SCU_PROT_REG, + AST_SCU_BASE + AST2500_SCU_MISC_2_CONTROL_REG + ); +} + +static void test_2600_write_permission_lock_state(void) +{ + test_write_permission_lock_state( + AST2600_MACHINE, + AST_SCU_BASE + AST2600_SCU_PROT_REG, + AST_SCU_BASE + AST2600_SCU_MISC_2_CONTROL_REG + ); +} + +int main(int argc, char **argv) +{ + g_test_init(&argc, &argv, NULL); + + qtest_add_func("/ast2500/scu/protection_register", + test_2500_protection_register); + qtest_add_func("/ast2600/scu/protection_register", + test_2600_protection_register); + + qtest_add_func("/ast2500/scu/write_permission_lock_state", + test_2500_write_permission_lock_state); + qtest_add_func("/ast2600/scu/write_permission_lock_state", + test_2600_write_permission_lock_state); + + return g_test_run(); +} diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_npcm8xx = \ qtests_aspeed = \ ['aspeed_gpio-test', 'aspeed_hace-test', + 'aspeed_scu-test', 'aspeed_smc-test'] qtests_aspeed64 = \ ['ast2700-gpio-test', -- 2.50.0 From: Jamin Lin <jamin_lin@aspeedtech.com> The ast2700a0-evb machine represents the first revision of the AST2700 and serves as the initial engineering sample rather than a production version. A newer revision, A1, is now supported, and the ast2700a1-evb should replace the older A0 version. Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Link: https://lore.kernel.org/qemu-devel/20250703052400.2927831-1-jamin_lin@aspeedtech.com Signed-off-by: Cédric Le Goater <clg@redhat.com> --- docs/about/deprecated.rst | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/docs/about/deprecated.rst b/docs/about/deprecated.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/about/deprecated.rst +++ b/docs/about/deprecated.rst @@ -XXX,XX +XXX,XX @@ deprecated; use the new name ``dtb-randomness`` instead. The new name better reflects the way this property affects all random data within the device tree blob, not just the ``kaslr-seed`` node. +Arm ``ast2700a0-evb`` machine (since 10.1) +'''''''''''''''''''''''''''''''''''''''''' + +The ``ast2700a0-evb`` machine represents the first revision of the AST2700 +and serves as the initial engineering sample rather than a production version. +A newer revision, A1, is now supported, and the ``ast2700a1-evb`` should +replace the older A0 version. + Mips ``mipssim`` machine (since 10.0) ''''''''''''''''''''''''''''''''''''' -- 2.50.0 From: Ed Tanous <etanous@nvidia.com> Aspeed2600 has two spi lanes; Add a new struct that can mount the second SPI. Signed-off-by: Ed Tanous <etanous@nvidia.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Link: https://lore.kernel.org/qemu-devel/20250703144249.3348879-2-etanous@nvidia.com Signed-off-by: Cédric Le Goater <clg@redhat.com> --- include/hw/arm/aspeed.h | 2 ++ hw/arm/aspeed.c | 2 ++ 2 files changed, 4 insertions(+) diff --git a/include/hw/arm/aspeed.h b/include/hw/arm/aspeed.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/aspeed.h +++ b/include/hw/arm/aspeed.h @@ -XXX,XX +XXX,XX @@ struct AspeedMachineClass { uint32_t hw_strap2; const char *fmc_model; const char *spi_model; + const char *spi2_model; uint32_t num_cs; + uint32_t num_cs2; uint32_t macs_mask; void (*i2c_init)(AspeedMachineState *bmc); uint32_t uart_default; diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ static void aspeed_machine_init(MachineState *machine) aspeed_board_init_flashes(&bmc->soc->spi[0], bmc->spi_model ? bmc->spi_model : amc->spi_model, 1, amc->num_cs); + aspeed_board_init_flashes(&bmc->soc->spi[1], + amc->spi2_model, 1, amc->num_cs2); } if (machine->kernel_filename && sc->num_cpus > 1) { -- 2.50.0 From: Ed Tanous <etanous@nvidia.com> This patch updates the docs for support of gb200-bmc. Signed-off-by: Ed Tanous <etanous@nvidia.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Link: https://lore.kernel.org/qemu-devel/20250703144249.3348879-3-etanous@nvidia.com Signed-off-by: Cédric Le Goater <clg@redhat.com> --- docs/system/arm/aspeed.rst | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/docs/system/arm/aspeed.rst b/docs/system/arm/aspeed.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/aspeed.rst +++ b/docs/system/arm/aspeed.rst @@ -XXX,XX +XXX,XX @@ -Aspeed family boards (``ast2500-evb``, ``ast2600-evb``, ``ast2700-evb``, ``bletchley-bmc``, ``fuji-bmc``, ``fby35-bmc``, ``fp5280g2-bmc``, ``g220a-bmc``, ``palmetto-bmc``, ``qcom-dc-scm-v1-bmc``, ``qcom-firework-bmc``, ``quanta-q71l-bmc``, ``rainier-bmc``, ``romulus-bmc``, ``sonorapass-bmc``, ``supermicrox11-bmc``, ``supermicrox11spi-bmc``, ``tiogapass-bmc``, ``witherspoon-bmc``, ``yosemitev2-bmc``) -================================================================================================================================================================================================================================================================================================================================================================================================================================= +Aspeed family boards (``ast2500-evb``, ``ast2600-evb``, ``ast2700-evb``, ``bletchley-bmc``, ``fuji-bmc``, ``gb200nvl-bmc``, ``fby35-bmc``, ``fp5280g2-bmc``, ``g220a-bmc``, ``palmetto-bmc``, ``qcom-dc-scm-v1-bmc``, ``qcom-firework-bmc``, ``quanta-q71l-bmc``, ``rainier-bmc``, ``romulus-bmc``, ``sonorapass-bmc``, ``supermicrox11-bmc``, ``supermicrox11spi-bmc``, ``tiogapass-bmc``, ``witherspoon-bmc``, ``yosemitev2-bmc``) The QEMU Aspeed machines model BMCs of various OpenPOWER systems and Aspeed evaluation boards. They are based on different releases of the @@ -XXX,XX +XXX,XX @@ AST2600 SoC based machines : - ``fuji-bmc`` Facebook Fuji BMC - ``bletchley-bmc`` Facebook Bletchley BMC - ``fby35-bmc`` Facebook fby35 BMC +- ``gb200nvl-bmc`` Nvidia GB200nvl BMC - ``qcom-dc-scm-v1-bmc`` Qualcomm DC-SCM V1 BMC - ``qcom-firework-bmc`` Qualcomm Firework BMC -- 2.50.0 From: Ed Tanous <etanous@nvidia.com> GB200nvl72 is a system for for accelerated compute. This is a model for the BMC target within the system. This is based on the device tree aspeed-bmc-nvidia-gb200nvl-bmc.dts from: [1] https://github.com/openbmc/linux/blob/dev-6.6/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts Signed-off-by: Ed Tanous <etanous@nvidia.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Link: https://lore.kernel.org/qemu-devel/20250703144249.3348879-4-etanous@nvidia.com Signed-off-by: Cédric Le Goater <clg@redhat.com> --- hw/arm/aspeed_eeprom.h | 3 ++ hw/arm/aspeed.c | 78 ++++++++++++++++++++++++++++++++++++++++++ hw/arm/aspeed_eeprom.c | 21 ++++++++++++ 3 files changed, 102 insertions(+) diff --git a/hw/arm/aspeed_eeprom.h b/hw/arm/aspeed_eeprom.h index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_eeprom.h +++ b/hw/arm/aspeed_eeprom.h @@ -XXX,XX +XXX,XX @@ extern const size_t rainier_bb_fruid_len; extern const uint8_t rainier_bmc_fruid[]; extern const size_t rainier_bmc_fruid_len; +extern const uint8_t gb200nvl_bmc_fruid[]; +extern const size_t gb200nvl_bmc_fruid_len; + #endif diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ struct AspeedMachineState { #define BLETCHLEY_BMC_HW_STRAP1 0x00002000 #define BLETCHLEY_BMC_HW_STRAP2 0x00000801 +/* GB200NVL hardware value */ +#define GB200NVL_BMC_HW_STRAP1 AST2600_EVB_HW_STRAP1 +#define GB200NVL_BMC_HW_STRAP2 AST2600_EVB_HW_STRAP2 + /* Qualcomm DC-SCM hardware value */ #define QCOM_DC_SCM_V1_BMC_HW_STRAP1 0x00000000 #define QCOM_DC_SCM_V1_BMC_HW_STRAP2 0x00000041 @@ -XXX,XX +XXX,XX @@ static void create_pca9552(AspeedSoCState *soc, int bus_id, int addr) TYPE_PCA9552, addr); } +static I2CSlave *create_pca9554(AspeedSoCState *soc, int bus_id, int addr) +{ + return i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, bus_id), + TYPE_PCA9554, addr); +} + static void sonorapass_bmc_i2c_init(AspeedMachineState *bmc) { AspeedSoCState *soc = bmc->soc; @@ -XXX,XX +XXX,XX @@ static void bletchley_bmc_i2c_init(AspeedMachineState *bmc) i2c_slave_create_simple(i2c[12], TYPE_PCA9552, 0x67); } + +static void gb200nvl_bmc_i2c_init(AspeedMachineState *bmc) +{ + AspeedSoCState *soc = bmc->soc; + I2CBus *i2c[15] = {}; + DeviceState *dev; + for (int i = 0; i < sizeof(i2c) / sizeof(i2c[0]); i++) { + if ((i == 11) || (i == 12) || (i == 13)) { + continue; + } + i2c[i] = aspeed_i2c_get_bus(&soc->i2c, i); + } + + /* Bus 5 Expander */ + create_pca9554(soc, 4, 0x21); + + /* Mux I2c Expanders */ + i2c_slave_create_simple(i2c[5], "pca9546", 0x71); + i2c_slave_create_simple(i2c[5], "pca9546", 0x72); + i2c_slave_create_simple(i2c[5], "pca9546", 0x73); + i2c_slave_create_simple(i2c[5], "pca9546", 0x75); + i2c_slave_create_simple(i2c[5], "pca9546", 0x76); + i2c_slave_create_simple(i2c[5], "pca9546", 0x77); + + /* Bus 10 */ + dev = DEVICE(create_pca9554(soc, 9, 0x20)); + + /* Set FPGA_READY */ + object_property_set_str(OBJECT(dev), "pin1", "high", &error_fatal); + + create_pca9554(soc, 9, 0x21); + at24c_eeprom_init(i2c[9], 0x50, 64 * KiB); + at24c_eeprom_init(i2c[9], 0x51, 64 * KiB); + + /* Bus 11 */ + at24c_eeprom_init_rom(i2c[10], 0x50, 256, gb200nvl_bmc_fruid, + gb200nvl_bmc_fruid_len); +} + static void fby35_i2c_init(AspeedMachineState *bmc) { AspeedSoCState *soc = bmc->soc; @@ -XXX,XX +XXX,XX @@ static void aspeed_machine_catalina_class_init(ObjectClass *oc, aspeed_machine_ast2600_class_emmc_init(oc); } +#define GB200NVL_BMC_RAM_SIZE ASPEED_RAM_SIZE(1 * GiB) + +static void aspeed_machine_gb200nvl_class_init(ObjectClass *oc, + const void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); + + mc->desc = "Nvidia GB200NVL BMC (Cortex-A7)"; + amc->soc_name = "ast2600-a3"; + amc->hw_strap1 = GB200NVL_BMC_HW_STRAP1; + amc->hw_strap2 = GB200NVL_BMC_HW_STRAP2; + amc->fmc_model = "mx66u51235f"; + amc->spi_model = "mx66u51235f"; + amc->num_cs = 2; + + amc->spi2_model = "mx66u51235f"; + amc->num_cs2 = 1; + amc->macs_mask = ASPEED_MAC0_ON | ASPEED_MAC1_ON; + amc->i2c_init = gb200nvl_bmc_i2c_init; + mc->default_ram_size = GB200NVL_BMC_RAM_SIZE; + aspeed_machine_class_init_cpus_defaults(mc); + aspeed_machine_ast2600_class_emmc_init(oc); +} + static void fby35_reset(MachineState *state, ResetType type) { AspeedMachineState *bmc = ASPEED_MACHINE(state); @@ -XXX,XX +XXX,XX @@ static const TypeInfo aspeed_machine_types[] = { .name = MACHINE_TYPE_NAME("bletchley-bmc"), .parent = TYPE_ASPEED_MACHINE, .class_init = aspeed_machine_bletchley_class_init, + }, { + .name = MACHINE_TYPE_NAME("gb200nvl-bmc"), + .parent = TYPE_ASPEED_MACHINE, + .class_init = aspeed_machine_gb200nvl_class_init, }, { .name = MACHINE_TYPE_NAME("catalina-bmc"), .parent = TYPE_ASPEED_MACHINE, diff --git a/hw/arm/aspeed_eeprom.c b/hw/arm/aspeed_eeprom.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_eeprom.c +++ b/hw/arm/aspeed_eeprom.c @@ -XXX,XX +XXX,XX @@ const uint8_t rainier_bmc_fruid[] = { 0x31, 0x50, 0x46, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, }; +const uint8_t gb200nvl_bmc_fruid[] = { + 0x01, 0x00, 0x00, 0x01, 0x0b, 0x00, 0x00, 0xf3, 0x01, 0x0a, 0x19, 0x1f, + 0x0f, 0xe6, 0xc6, 0x4e, 0x56, 0x49, 0x44, 0x49, 0x41, 0xc5, 0x50, 0x33, + 0x38, 0x30, 0x39, 0xcd, 0x31, 0x35, 0x38, 0x33, 0x33, 0x32, 0x34, 0x38, + 0x30, 0x30, 0x31, 0x35, 0x30, 0xd2, 0x36, 0x39, 0x39, 0x2d, 0x31, 0x33, + 0x38, 0x30, 0x39, 0x2d, 0x30, 0x34, 0x30, 0x34, 0x2d, 0x36, 0x30, 0x30, + 0xc0, 0x01, 0x01, 0xd6, 0x4d, 0x41, 0x43, 0x3a, 0x20, 0x33, 0x43, 0x3a, + 0x36, 0x44, 0x3a, 0x36, 0x36, 0x3a, 0x31, 0x34, 0x3a, 0x43, 0x38, 0x3a, + 0x37, 0x41, 0xc1, 0x3b, 0x01, 0x09, 0x19, 0xc6, 0x4e, 0x56, 0x49, 0x44, + 0x49, 0x41, 0xc9, 0x50, 0x33, 0x38, 0x30, 0x39, 0x2d, 0x42, 0x4d, 0x43, + 0xd2, 0x36, 0x39, 0x39, 0x2d, 0x31, 0x33, 0x38, 0x30, 0x39, 0x2d, 0x30, + 0x34, 0x30, 0x34, 0x2d, 0x36, 0x30, 0x30, 0xc4, 0x41, 0x45, 0x2e, 0x31, + 0xcd, 0x31, 0x35, 0x38, 0x33, 0x33, 0x32, 0x34, 0x38, 0x30, 0x30, 0x31, + 0x35, 0x30, 0xc0, 0xc4, 0x76, 0x30, 0x2e, 0x31, 0xc1, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0xb4, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff + +}; + const size_t tiogapass_bmc_fruid_len = sizeof(tiogapass_bmc_fruid); const size_t fby35_nic_fruid_len = sizeof(fby35_nic_fruid); const size_t fby35_bb_fruid_len = sizeof(fby35_bb_fruid); @@ -XXX,XX +XXX,XX @@ const size_t fby35_bmc_fruid_len = sizeof(fby35_bmc_fruid); const size_t yosemitev2_bmc_fruid_len = sizeof(yosemitev2_bmc_fruid); const size_t rainier_bb_fruid_len = sizeof(rainier_bb_fruid); const size_t rainier_bmc_fruid_len = sizeof(rainier_bmc_fruid); +const size_t gb200nvl_bmc_fruid_len = sizeof(gb200nvl_bmc_fruid); + -- 2.50.0 From: Ed Tanous <etanous@nvidia.com> To support the newly added gb200 machine, add appropriate tests and extend do_test_arm_aspeed_openbmc() to support the hostname of this new system: "gb200nvl-obmc". Signed-off-by: Ed Tanous <etanous@nvidia.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Link: https://lore.kernel.org/qemu-devel/20250703144249.3348879-5-etanous@nvidia.com [ clg: Adjust commit log to document do_test_arm_aspeed_openbmc() change ] Signed-off-by: Cédric Le Goater <clg@redhat.com> --- tests/functional/aspeed.py | 9 +++++-- tests/functional/meson.build | 2 ++ .../test_arm_aspeed_gb200nvl_bmc.py | 26 +++++++++++++++++++ 3 files changed, 35 insertions(+), 2 deletions(-) create mode 100644 tests/functional/test_arm_aspeed_gb200nvl_bmc.py diff --git a/tests/functional/aspeed.py b/tests/functional/aspeed.py index XXXXXXX..XXXXXXX 100644 --- a/tests/functional/aspeed.py +++ b/tests/functional/aspeed.py @@ -XXX,XX +XXX,XX @@ class AspeedTest(LinuxKernelTest): def do_test_arm_aspeed_openbmc(self, machine, image, uboot='2019.04', - cpu_id='0x0', soc='AST2500 rev A1'): - hostname = machine.removesuffix('-bmc') + cpu_id='0x0', soc='AST2500 rev A1', + image_hostname=None): + # Allow for the image hostname to not end in "-bmc" + if image_hostname is not None: + hostname = image_hostname + else: + hostname = machine.removesuffix('-bmc') self.set_machine(machine) self.vm.set_console() diff --git a/tests/functional/meson.build b/tests/functional/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/functional/meson.build +++ b/tests/functional/meson.build @@ -XXX,XX +XXX,XX @@ test_timeouts = { 'arm_aspeed_ast2600' : 1200, 'arm_aspeed_bletchley' : 480, 'arm_aspeed_catalina' : 480, + 'arm_aspeed_gb200nvl_bmc' : 480, 'arm_aspeed_rainier' : 480, 'arm_bpim2u' : 500, 'arm_collie' : 180, @@ -XXX,XX +XXX,XX @@ tests_arm_system_thorough = [ 'arm_aspeed_ast2600', 'arm_aspeed_bletchley', 'arm_aspeed_catalina', + 'arm_aspeed_gb200nvl_bmc', 'arm_aspeed_rainier', 'arm_bpim2u', 'arm_canona1100', diff --git a/tests/functional/test_arm_aspeed_gb200nvl_bmc.py b/tests/functional/test_arm_aspeed_gb200nvl_bmc.py new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/functional/test_arm_aspeed_gb200nvl_bmc.py @@ -XXX,XX +XXX,XX @@ +#!/usr/bin/env python3 +# +# Functional test that boots the ASPEED machines +# +# SPDX-License-Identifier: GPL-2.0-or-later + +from qemu_test import Asset +from aspeed import AspeedTest + + +class GB200Machine(AspeedTest): + + ASSET_GB200_FLASH = Asset( + 'https://github.com/legoater/qemu-aspeed-boot/raw/refs/heads/master/images/gb200nvl-obmc/obmc-phosphor-image-gb200nvl-obmc-20250702182348.static.mtd.xz', + 'b84819317cb3dc762895ad507705978ef000bfc77c50c33a63bdd37921db0dbc') + + def test_arm_aspeed_gb200_openbmc(self): + image_path = self.uncompress(self.ASSET_GB200_FLASH) + + self.do_test_arm_aspeed_openbmc('gb200nvl-bmc', image=image_path, + uboot='2019.04', cpu_id='0xf00', + soc='AST2600 rev A3', + image_hostname='gb200nvl-obmc') + +if __name__ == '__main__': + AspeedTest.main() -- 2.50.0