The following changes since commit 3f044554b94fc0756d5b3cdbf84501e0eea0e629: Merge tag 'pull-vfio-20240624' of https://github.com/legoater/qemu into staging (2024-06-24 21:30:34 -0700) are available in the Git repository at: https://github.com/alistair23/qemu.git tags/pull-riscv-to-apply-20240627-1 for you to fetch changes up to 2f5a2315b84a9b1f089ecfc3f31b29813609a7b7: target/riscv: Apply modularized matching conditions for icount trigger (2024-06-27 13:09:16 +1000) ---------------------------------------------------------------- RISC-V PR for 9.1 * Extend virtual irq csrs masks to be 64 bit wide * Move Guest irqs out of the core local irqs range * zvbb implies zvkb * virt: add address-cells in create_fdt_one_aplic() * virt: add aplic nodename helper * virt: rename aplic nodename to 'interrupt-controller' * virt: aplic DT: add 'qemu, aplic' to 'compatible' * virt: aplic DT: rename prop to 'riscv, delegation' * virt: change imsic nodename to 'interrupt-controller' * virt: imsics DT: add 'qemu, imsics' to 'compatible' * virt: imsics DT: add '#msi-cells' * QEMU support for KVM Guest Debug on RISC-V * Support RISC-V privilege 1.13 spec * Add support for RISC-V ACPI tests * Modularize common match conditions for trigger ---------------------------------------------------------------- Alvin Chang (3): target/riscv: Add functions for common matching conditions of trigger target/riscv: Apply modularized matching conditions for watchpoint target/riscv: Apply modularized matching conditions for icount trigger Branislav Brzak (1): target/riscv: Fix froundnx.h nanbox check Chao Du (3): target/riscv/kvm: add software breakpoints support target/riscv/kvm: handle the exit with debug reason target/riscv/kvm: define TARGET_KVM_HAVE_GUEST_DEBUG Clément Léger (1): target/riscv: fix instructions count handling in icount mode Daniel Henrique Barboza (8): hw/riscv/virt.c: add address-cells in create_fdt_one_aplic() hw/riscv/virt.c: add aplic nodename helper hw/riscv/virt.c: rename aplic nodename to 'interrupt-controller' hw/riscv/virt.c: aplic DT: add 'qemu, aplic' to 'compatible' hw/riscv/virt.c: aplic DT: rename prop to 'riscv, delegation' hw/riscv/virt.c: change imsic nodename to 'interrupt-controller' hw/riscv/virt.c: imsics DT: add 'qemu, imsics' to 'compatible' hw/riscv/virt.c: imsics DT: add '#msi-cells' Fea.Wang (5): target/riscv: Define macros and variables for ss1p13 target/riscv: Add 'P1P13' bit in SMSTATEEN0 target/riscv: Add MEDELEGH, HEDELEGH csrs for RV32 target/riscv: Reserve exception codes for sw-check and hw-err target/riscv: Support the version for ss1p13 Frank Chang (6): target/riscv: Introduce extension implied rules definition target/riscv: Introduce extension implied rule helpers target/riscv: Add MISA extension implied rules target/riscv: Add multi extension implied rules target/riscv: Add Zc extension implied rule target/riscv: Remove extension auto-update check statements Jerry Zhang Jian (1): target/riscv: zvbb implies zvkb Jim Shu (1): target/riscv: Reuse the conversion function of priv_spec Rajnesh Kanwal (2): target/riscv: Extend virtual irq csrs masks to be 64 bit wide. target/riscv: Move Guest irqs out of the core local irqs range. Sunil V L (1): hw/riscv/virt.c: Make block devices default to virtio configs/targets/riscv64-softmmu.mak | 1 + include/hw/riscv/virt.h | 1 + target/riscv/cpu.h | 28 ++- target/riscv/cpu_bits.h | 8 +- target/riscv/cpu_cfg.h | 1 + hw/riscv/virt.c | 38 +++- target/riscv/cpu.c | 404 +++++++++++++++++++++++++++++++++++- target/riscv/csr.c | 92 ++++++-- target/riscv/debug.c | 129 ++++++++---- target/riscv/fpu_helper.c | 2 +- target/riscv/kvm/kvm-cpu.c | 89 ++++++++ target/riscv/tcg/tcg-cpu.c | 287 ++++++++++++++----------- 12 files changed, 877 insertions(+), 203 deletions(-) From: Rajnesh Kanwal <rkanwal@rivosinc.com> AIA extends the width of all IRQ CSRs to 64bit even in 32bit systems by adding missing half CSRs. This seems to be missed while adding support for virtual IRQs. The whole logic seems to be correct except the width of the masks. Fixes: 1697837ed9 ("target/riscv: Add M-mode virtual interrupt and IRQ filtering support.") Fixes: 40336d5b1d ("target/riscv: Add HS-mode virtual interrupt and IRQ filtering support.") Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240520125157.311503-2-rkanwal@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static const target_ulong sstatus_v1_10_mask = SSTATUS_SIE | SSTATUS_SPIE | */ /* Bit STIP can be an alias of mip.STIP that's why it's writable in mvip. */ -static const target_ulong mvip_writable_mask = MIP_SSIP | MIP_STIP | MIP_SEIP | +static const uint64_t mvip_writable_mask = MIP_SSIP | MIP_STIP | MIP_SEIP | LOCAL_INTERRUPTS; -static const target_ulong mvien_writable_mask = MIP_SSIP | MIP_SEIP | +static const uint64_t mvien_writable_mask = MIP_SSIP | MIP_SEIP | LOCAL_INTERRUPTS; -static const target_ulong sip_writable_mask = SIP_SSIP | LOCAL_INTERRUPTS; -static const target_ulong hip_writable_mask = MIP_VSSIP; -static const target_ulong hvip_writable_mask = MIP_VSSIP | MIP_VSTIP | +static const uint64_t sip_writable_mask = SIP_SSIP | LOCAL_INTERRUPTS; +static const uint64_t hip_writable_mask = MIP_VSSIP; +static const uint64_t hvip_writable_mask = MIP_VSSIP | MIP_VSTIP | MIP_VSEIP | LOCAL_INTERRUPTS; -static const target_ulong hvien_writable_mask = LOCAL_INTERRUPTS; +static const uint64_t hvien_writable_mask = LOCAL_INTERRUPTS; -static const target_ulong vsip_writable_mask = MIP_VSSIP | LOCAL_INTERRUPTS; +static const uint64_t vsip_writable_mask = MIP_VSSIP | LOCAL_INTERRUPTS; const bool valid_vm_1_10_32[16] = { [VM_1_10_MBARE] = true, -- 2.45.2 From: Rajnesh Kanwal <rkanwal@rivosinc.com> Qemu maps IRQs 0:15 for core interrupts and 16 onward for guest interrupts which are later translated to hgiep in `riscv_cpu_set_irq()` function. With virtual IRQ support added, software now can fully use the whole local interrupt range without any actual hardware attached. This change moves the guest interrupt range after the core local interrupt range to avoid clash. Fixes: 1697837ed9 ("target/riscv: Add M-mode virtual interrupt and IRQ filtering support.") Fixes: 40336d5b1d ("target/riscv: Add HS-mode virtual interrupt and IRQ filtering support.") Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20240520125157.311503-3-rkanwal@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu_bits.h | 3 ++- target/riscv/csr.c | 9 ++++++++- 2 files changed, 10 insertions(+), 2 deletions(-) diff --git a/target/riscv/cpu_bits.h b/target/riscv/cpu_bits.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_bits.h +++ b/target/riscv/cpu_bits.h @@ -XXX,XX +XXX,XX @@ typedef enum RISCVException { #define IRQ_M_EXT 11 #define IRQ_S_GEXT 12 #define IRQ_PMU_OVF 13 -#define IRQ_LOCAL_MAX 16 +#define IRQ_LOCAL_MAX 64 +/* -1 is due to bit zero of hgeip and hgeie being ROZ. */ #define IRQ_LOCAL_GUEST_MAX (TARGET_LONG_BITS - 1) /* mip masks */ diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException write_stimecmph(CPURISCVState *env, int csrno, #define VSTOPI_NUM_SRCS 5 -#define LOCAL_INTERRUPTS (~0x1FFF) +/* + * All core local interrupts except the fixed ones 0:12. This macro is for + * virtual interrupts logic so please don't change this to avoid messing up + * the whole support, For reference see AIA spec: `5.3 Interrupt filtering and + * virtual interrupts for supervisor level` and `6.3.2 Virtual interrupts for + * VS level`. + */ +#define LOCAL_INTERRUPTS (~0x1FFFULL) static const uint64_t delegable_ints = S_MODE_INTERRUPTS | VS_MODE_INTERRUPTS | MIP_LCOFIP; -- 2.45.2 From: Jerry Zhang Jian <jerry.zhangjian@sifive.com> According to RISC-V crypto spec, Zvkb extension is a subset of the Zvbb extension [1]. 1: https://github.com/riscv/riscv-crypto/blob/1769c2609bf4535632e0c0fd715778f212bb272e/doc/vector/riscv-crypto-vector-zvkb.adoc?plain=1#L10 Signed-off-by: Jerry Zhang Jian <jerry.zhangjian@sifive.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240528130349.20193-1-jerry.zhangjian@sifive.com> [ Changes by AF: - Tidy up commit message - Rebase ] Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ void riscv_cpu_validate_set_extensions(RISCVCPU *cpu, Error **errp) cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zvbc), true); } + if (cpu->cfg.ext_zvbb) { + cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zvkb), true); + } + if ((cpu->cfg.ext_zvbb || cpu->cfg.ext_zvkb || cpu->cfg.ext_zvkg || cpu->cfg.ext_zvkned || cpu->cfg.ext_zvknha || cpu->cfg.ext_zvksed || cpu->cfg.ext_zvksh) && !cpu->cfg.ext_zve32x) { -- 2.45.2 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> We need #address-cells properties in all interrupt controllers that are referred by an interrupt-map [1]. For the RISC-V machine, both PLIC and APLIC controllers must have this property. PLIC already sets it in create_fdt_socket_plic(). Set the property for APLIC in create_fdt_one_aplic(). [1] https://lore.kernel.org/linux-arm-kernel/CAL_JsqJE15D-xXxmELsmuD+JQHZzxGzdXvikChn6KFWqk6NzPw@mail.gmail.com/ Suggested-by: Anup Patel <apatel@ventanamicro.com> Fixes: e6faee65855b ("hw/riscv: virt: Add optional AIA APLIC support to virt machine") Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240531202759.911601-2-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/riscv/virt.h | 1 + hw/riscv/virt.c | 2 ++ 2 files changed, 3 insertions(+) diff --git a/include/hw/riscv/virt.h b/include/hw/riscv/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/riscv/virt.h +++ b/include/hw/riscv/virt.h @@ -XXX,XX +XXX,XX @@ enum { #define FDT_PLIC_ADDR_CELLS 0 #define FDT_PLIC_INT_CELLS 1 #define FDT_APLIC_INT_CELLS 2 +#define FDT_APLIC_ADDR_CELLS 0 #define FDT_IMSIC_INT_CELLS 0 #define FDT_MAX_INT_CELLS 2 #define FDT_MAX_INT_MAP_WIDTH (FDT_PCI_ADDR_CELLS + FDT_PCI_INT_CELLS + \ diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_one_aplic(RISCVVirtState *s, int socket, aplic_name = g_strdup_printf("/soc/aplic@%lx", aplic_addr); qemu_fdt_add_subnode(ms->fdt, aplic_name); qemu_fdt_setprop_string(ms->fdt, aplic_name, "compatible", "riscv,aplic"); + qemu_fdt_setprop_cell(ms->fdt, aplic_name, "#address-cells", + FDT_APLIC_ADDR_CELLS); qemu_fdt_setprop_cell(ms->fdt, aplic_name, "#interrupt-cells", FDT_APLIC_INT_CELLS); qemu_fdt_setprop(ms->fdt, aplic_name, "interrupt-controller", NULL, 0); -- 2.45.2 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> We'll change the aplic DT nodename in the next patch and the name is hardcoded in 2 different functions. Create a helper to change a single place later. While we're at it, in create_fdt_socket_aplic(), move 'aplic_name' inside the conditional to avoid allocating a string that won't be used when socket == NULL. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240531202759.911601-3-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_imsic(RISCVVirtState *s, const MemMapEntry *memmap, } +/* Caller must free string after use */ +static char *fdt_get_aplic_nodename(unsigned long aplic_addr) +{ + return g_strdup_printf("/soc/aplic@%lx", aplic_addr); +} + static void create_fdt_one_aplic(RISCVVirtState *s, int socket, unsigned long aplic_addr, uint32_t aplic_size, uint32_t msi_phandle, @@ -XXX,XX +XXX,XX @@ static void create_fdt_one_aplic(RISCVVirtState *s, int socket, bool m_mode, int num_harts) { int cpu; - g_autofree char *aplic_name = NULL; + g_autofree char *aplic_name = fdt_get_aplic_nodename(aplic_addr); g_autofree uint32_t *aplic_cells = g_new0(uint32_t, num_harts * 2); MachineState *ms = MACHINE(s); @@ -XXX,XX +XXX,XX @@ static void create_fdt_one_aplic(RISCVVirtState *s, int socket, aplic_cells[cpu * 2 + 1] = cpu_to_be32(m_mode ? IRQ_M_EXT : IRQ_S_EXT); } - aplic_name = g_strdup_printf("/soc/aplic@%lx", aplic_addr); qemu_fdt_add_subnode(ms->fdt, aplic_name); qemu_fdt_setprop_string(ms->fdt, aplic_name, "compatible", "riscv,aplic"); qemu_fdt_setprop_cell(ms->fdt, aplic_name, "#address-cells", @@ -XXX,XX +XXX,XX @@ static void create_fdt_socket_aplic(RISCVVirtState *s, uint32_t *aplic_phandles, int num_harts) { - g_autofree char *aplic_name = NULL; unsigned long aplic_addr; MachineState *ms = MACHINE(s); uint32_t aplic_m_phandle, aplic_s_phandle; @@ -XXX,XX +XXX,XX @@ static void create_fdt_socket_aplic(RISCVVirtState *s, aplic_s_phandle, 0, false, num_harts); - aplic_name = g_strdup_printf("/soc/aplic@%lx", aplic_addr); - if (!socket) { + g_autofree char *aplic_name = fdt_get_aplic_nodename(aplic_addr); platform_bus_add_all_fdt_nodes(ms->fdt, aplic_name, memmap[VIRT_PLATFORM_BUS].base, memmap[VIRT_PLATFORM_BUS].size, -- 2.45.2 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> The correct name of the aplic controller node, as per Linux kernel DT docs [1], is 'interrupt-controller@addr'. [1] Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml Reported-by: Conor Dooley <conor@kernel.org> Fixes: e6faee65855b ("hw/riscv: virt: Add optional AIA APLIC support to virt machine") Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240531202759.911601-4-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_imsic(RISCVVirtState *s, const MemMapEntry *memmap, /* Caller must free string after use */ static char *fdt_get_aplic_nodename(unsigned long aplic_addr) { - return g_strdup_printf("/soc/aplic@%lx", aplic_addr); + return g_strdup_printf("/soc/interrupt-controller@%lx", aplic_addr); } static void create_fdt_one_aplic(RISCVVirtState *s, int socket, -- 2.45.2 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> The DT docs for riscv,aplic [1] predicts a 'qemu,aplic' enum in the 'compatible' property. [1] Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml Reported-by: Conor Dooley <conor@kernel.org> Fixes: e6faee65855b ("hw/riscv: virt: Add optional AIA APLIC support to virt machine") Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240531202759.911601-5-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_one_aplic(RISCVVirtState *s, int socket, g_autofree char *aplic_name = fdt_get_aplic_nodename(aplic_addr); g_autofree uint32_t *aplic_cells = g_new0(uint32_t, num_harts * 2); MachineState *ms = MACHINE(s); + static const char * const aplic_compat[2] = { + "qemu,aplic", "riscv,aplic" + }; for (cpu = 0; cpu < num_harts; cpu++) { aplic_cells[cpu * 2 + 0] = cpu_to_be32(intc_phandles[cpu]); @@ -XXX,XX +XXX,XX @@ static void create_fdt_one_aplic(RISCVVirtState *s, int socket, } qemu_fdt_add_subnode(ms->fdt, aplic_name); - qemu_fdt_setprop_string(ms->fdt, aplic_name, "compatible", "riscv,aplic"); + qemu_fdt_setprop_string_array(ms->fdt, aplic_name, "compatible", + (char **)&aplic_compat, + ARRAY_SIZE(aplic_compat)); qemu_fdt_setprop_cell(ms->fdt, aplic_name, "#address-cells", FDT_APLIC_ADDR_CELLS); qemu_fdt_setprop_cell(ms->fdt, aplic_name, -- 2.45.2 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> The DT docs for riscv,aplic [1] predicts a 'riscv,delegation' property. Not 'riscv,delegate'. [1] Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml Reported-by: Conor Dooley <conor@kernel.org> Fixes: e6faee65855b ("hw/riscv: virt: Add optional AIA APLIC support to virt machine") Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240531202759.911601-6-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_one_aplic(RISCVVirtState *s, int socket, if (aplic_child_phandle) { qemu_fdt_setprop_cell(ms->fdt, aplic_name, "riscv,children", aplic_child_phandle); - qemu_fdt_setprop_cells(ms->fdt, aplic_name, "riscv,delegate", + qemu_fdt_setprop_cells(ms->fdt, aplic_name, "riscv,delegation", aplic_child_phandle, 0x1, VIRT_IRQCHIP_NUM_SOURCES); } -- 2.45.2 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> The Linux DT docs for imsic [1] predicts an 'interrupt-controller@addr' node, not 'imsic@addr', given this node inherits the 'interrupt-controller' node. [1] Documentation/devicetree/bindings/interrupt-controller/riscv,imsics.yaml Reported-by: Conor Dooley <conor@kernel.org> Fixes: 28d8c281200f ("hw/riscv: virt: Add optional AIA IMSIC support to virt machine") Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240531202759.911601-7-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_one_imsic(RISCVVirtState *s, hwaddr base_addr, } } - imsic_name = g_strdup_printf("/soc/imsics@%lx", (unsigned long)base_addr); + imsic_name = g_strdup_printf("/soc/interrupt-controller@%lx", + (unsigned long)base_addr); qemu_fdt_add_subnode(ms->fdt, imsic_name); qemu_fdt_setprop_string(ms->fdt, imsic_name, "compatible", "riscv,imsics"); qemu_fdt_setprop_cell(ms->fdt, imsic_name, "#interrupt-cells", -- 2.45.2 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> The DT docs for riscv,imsics [1] predicts a 'qemu,imsics' enum in the 'compatible' property. [1] Documentation/devicetree/bindings/interrupt-controller/riscv,imsics.yaml Reported-by: Conor Dooley <conor@kernel.org> Fixes: 28d8c281200f ("hw/riscv: virt: Add optional AIA IMSIC support to virt machine") Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240531202759.911601-8-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_one_imsic(RISCVVirtState *s, hwaddr base_addr, uint32_t imsic_max_hart_per_socket, imsic_addr, imsic_size; g_autofree uint32_t *imsic_cells = NULL; g_autofree uint32_t *imsic_regs = NULL; + static const char * const imsic_compat[2] = { + "qemu,imsics", "riscv,imsics" + }; imsic_cells = g_new0(uint32_t, ms->smp.cpus * 2); imsic_regs = g_new0(uint32_t, socket_count * 4); @@ -XXX,XX +XXX,XX @@ static void create_fdt_one_imsic(RISCVVirtState *s, hwaddr base_addr, imsic_name = g_strdup_printf("/soc/interrupt-controller@%lx", (unsigned long)base_addr); qemu_fdt_add_subnode(ms->fdt, imsic_name); - qemu_fdt_setprop_string(ms->fdt, imsic_name, "compatible", "riscv,imsics"); + qemu_fdt_setprop_string_array(ms->fdt, imsic_name, "compatible", + (char **)&imsic_compat, + ARRAY_SIZE(imsic_compat)); + qemu_fdt_setprop_cell(ms->fdt, imsic_name, "#interrupt-cells", FDT_IMSIC_INT_CELLS); qemu_fdt_setprop(ms->fdt, imsic_name, "interrupt-controller", NULL, 0); -- 2.45.2 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> The DT docs for riscv,imsics [1] requires a 'msi-cell' property. Add one and set it zero. [1] Documentation/devicetree/bindings/interrupt-controller/riscv,imsics.yaml Reported-by: Conor Dooley <conor@kernel.org> Fixes: 28d8c281200f ("hw/riscv: virt: Add optional AIA IMSIC support to virt machine") Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20240531202759.911601-9-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_one_imsic(RISCVVirtState *s, hwaddr base_addr, FDT_IMSIC_INT_CELLS); qemu_fdt_setprop(ms->fdt, imsic_name, "interrupt-controller", NULL, 0); qemu_fdt_setprop(ms->fdt, imsic_name, "msi-controller", NULL, 0); + qemu_fdt_setprop_cell(ms->fdt, imsic_name, "#msi-cells", 0); qemu_fdt_setprop(ms->fdt, imsic_name, "interrupts-extended", imsic_cells, ms->smp.cpus * sizeof(uint32_t) * 2); qemu_fdt_setprop(ms->fdt, imsic_name, "reg", imsic_regs, -- 2.45.2 From: Chao Du <duchao@eswincomputing.com> This patch implements insert/remove software breakpoint process. For RISC-V, GDB treats single-step similarly to breakpoint: add a breakpoint at the next step address, then continue. So this also works for single-step debugging. Implement kvm_arch_update_guest_debug(): Set the control flag when there are active breakpoints. This will help KVM to know the status in the userspace. Add some stubs which are necessary for building, and will be implemented later. Signed-off-by: Chao Du <duchao@eswincomputing.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240606014501.20763-2-duchao@eswincomputing.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/kvm/kvm-cpu.c | 69 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 69 insertions(+) diff --git a/target/riscv/kvm/kvm-cpu.c b/target/riscv/kvm/kvm-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/kvm/kvm-cpu.c +++ b/target/riscv/kvm/kvm-cpu.c @@ -XXX,XX +XXX,XX @@ static const TypeInfo riscv_kvm_cpu_type_infos[] = { }; DEFINE_TYPES(riscv_kvm_cpu_type_infos) + +static const uint32_t ebreak_insn = 0x00100073; +static const uint16_t c_ebreak_insn = 0x9002; + +int kvm_arch_insert_sw_breakpoint(CPUState *cs, struct kvm_sw_breakpoint *bp) +{ + if (cpu_memory_rw_debug(cs, bp->pc, (uint8_t *)&bp->saved_insn, 2, 0)) { + return -EINVAL; + } + + if ((bp->saved_insn & 0x3) == 0x3) { + if (cpu_memory_rw_debug(cs, bp->pc, (uint8_t *)&bp->saved_insn, 4, 0) + || cpu_memory_rw_debug(cs, bp->pc, (uint8_t *)&ebreak_insn, 4, 1)) { + return -EINVAL; + } + } else { + if (cpu_memory_rw_debug(cs, bp->pc, (uint8_t *)&c_ebreak_insn, 2, 1)) { + return -EINVAL; + } + } + + return 0; +} + +int kvm_arch_remove_sw_breakpoint(CPUState *cs, struct kvm_sw_breakpoint *bp) +{ + uint32_t ebreak; + uint16_t c_ebreak; + + if ((bp->saved_insn & 0x3) == 0x3) { + if (cpu_memory_rw_debug(cs, bp->pc, (uint8_t *)&ebreak, 4, 0) || + ebreak != ebreak_insn || + cpu_memory_rw_debug(cs, bp->pc, (uint8_t *)&bp->saved_insn, 4, 1)) { + return -EINVAL; + } + } else { + if (cpu_memory_rw_debug(cs, bp->pc, (uint8_t *)&c_ebreak, 2, 0) || + c_ebreak != c_ebreak_insn || + cpu_memory_rw_debug(cs, bp->pc, (uint8_t *)&bp->saved_insn, 2, 1)) { + return -EINVAL; + } + } + + return 0; +} + +int kvm_arch_insert_hw_breakpoint(vaddr addr, vaddr len, int type) +{ + /* TODO; To be implemented later. */ + return -EINVAL; +} + +int kvm_arch_remove_hw_breakpoint(vaddr addr, vaddr len, int type) +{ + /* TODO; To be implemented later. */ + return -EINVAL; +} + +void kvm_arch_remove_all_hw_breakpoints(void) +{ + /* TODO; To be implemented later. */ +} + +void kvm_arch_update_guest_debug(CPUState *cs, struct kvm_guest_debug *dbg) +{ + if (kvm_sw_breakpoints_active(cs)) { + dbg->control |= KVM_GUESTDBG_ENABLE; + } +} -- 2.45.2 From: Chao Du <duchao@eswincomputing.com> If the breakpoint belongs to the userspace then set the ret value. Signed-off-by: Chao Du <duchao@eswincomputing.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240606014501.20763-3-duchao@eswincomputing.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/kvm/kvm-cpu.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/target/riscv/kvm/kvm-cpu.c b/target/riscv/kvm/kvm-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/kvm/kvm-cpu.c +++ b/target/riscv/kvm/kvm-cpu.c @@ -XXX,XX +XXX,XX @@ static int kvm_riscv_handle_csr(CPUState *cs, struct kvm_run *run) return ret; } +static bool kvm_riscv_handle_debug(CPUState *cs) +{ + RISCVCPU *cpu = RISCV_CPU(cs); + CPURISCVState *env = &cpu->env; + + /* Ensure PC is synchronised */ + kvm_cpu_synchronize_state(cs); + + if (kvm_find_sw_breakpoint(cs, env->pc)) { + return true; + } + + return false; +} + int kvm_arch_handle_exit(CPUState *cs, struct kvm_run *run) { int ret = 0; @@ -XXX,XX +XXX,XX @@ int kvm_arch_handle_exit(CPUState *cs, struct kvm_run *run) case KVM_EXIT_RISCV_CSR: ret = kvm_riscv_handle_csr(cs, run); break; + case KVM_EXIT_DEBUG: + if (kvm_riscv_handle_debug(cs)) { + ret = EXCP_DEBUG; + } + break; default: qemu_log_mask(LOG_UNIMP, "%s: un-handled exit reason %d\n", __func__, run->exit_reason); -- 2.45.2 From: Chao Du <duchao@eswincomputing.com> To enable the KVM GUEST DEBUG for RISC-V at QEMU side. Signed-off-by: Chao Du <duchao@eswincomputing.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240606014501.20763-4-duchao@eswincomputing.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- configs/targets/riscv64-softmmu.mak | 1 + 1 file changed, 1 insertion(+) diff --git a/configs/targets/riscv64-softmmu.mak b/configs/targets/riscv64-softmmu.mak index XXXXXXX..XXXXXXX 100644 --- a/configs/targets/riscv64-softmmu.mak +++ b/configs/targets/riscv64-softmmu.mak @@ -XXX,XX +XXX,XX @@ TARGET_ARCH=riscv64 TARGET_BASE_ARCH=riscv TARGET_SUPPORTS_MTTCG=y +TARGET_KVM_HAVE_GUEST_DEBUG=y TARGET_XML_FILES= gdb-xml/riscv-64bit-cpu.xml gdb-xml/riscv-32bit-fpu.xml gdb-xml/riscv-64bit-fpu.xml gdb-xml/riscv-64bit-virtual.xml # needed by boot.c TARGET_NEED_FDT=y -- 2.45.2 From: Jim Shu <jim.shu@sifive.com> Public the conversion function of priv_spec in cpu.h, so that tcg-cpu.c could also use it. Signed-off-by: Jim Shu <jim.shu@sifive.com> Signed-off-by: Fea.Wang <fea.wang@sifive.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240606135454.119186-2-fea.wang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 1 + target/riscv/cpu.c | 2 +- target/riscv/tcg/tcg-cpu.c | 13 ++++--------- 3 files changed, 6 insertions(+), 10 deletions(-) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ const char *satp_mode_str(uint8_t satp_mode, bool is_32_bit); /* Implemented in th_csr.c */ void th_register_custom_csrs(RISCVCPU *cpu); +const char *priv_spec_to_str(int priv_version); #endif /* RISCV_CPU_H */ diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static int priv_spec_from_str(const char *priv_spec_str) return priv_version; } -static const char *priv_spec_to_str(int priv_version) +const char *priv_spec_to_str(int priv_version) { switch (priv_version) { case PRIV_VERSION_1_10_0: diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_write_misa_bit(RISCVCPU *cpu, uint32_t bit, static const char *cpu_priv_ver_to_str(int priv_ver) { - switch (priv_ver) { - case PRIV_VERSION_1_10_0: - return "v1.10.0"; - case PRIV_VERSION_1_11_0: - return "v1.11.0"; - case PRIV_VERSION_1_12_0: - return "v1.12.0"; - } + const char *priv_spec_str = priv_spec_to_str(priv_ver); - g_assert_not_reached(); + g_assert(priv_spec_str); + + return priv_spec_str; } static void riscv_cpu_synchronize_from_tb(CPUState *cs, -- 2.45.2 From: "Fea.Wang" <fea.wang@sifive.com> Add macros and variables for RISC-V privilege 1.13 support. Signed-off-by: Fea.Wang <fea.wang@sifive.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Weiwei Li <liwei1518@gmail.com> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240606135454.119186-3-fea.wang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 4 +++- target/riscv/cpu_cfg.h | 1 + 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ extern RISCVCPUProfile *riscv_profiles[]; #define PRIV_VER_1_10_0_STR "v1.10.0" #define PRIV_VER_1_11_0_STR "v1.11.0" #define PRIV_VER_1_12_0_STR "v1.12.0" +#define PRIV_VER_1_13_0_STR "v1.13.0" enum { PRIV_VERSION_1_10_0 = 0, PRIV_VERSION_1_11_0, PRIV_VERSION_1_12_0, + PRIV_VERSION_1_13_0, - PRIV_VERSION_LATEST = PRIV_VERSION_1_12_0, + PRIV_VERSION_LATEST = PRIV_VERSION_1_13_0, }; #define VEXT_VERSION_1_00_0 0x00010000 diff --git a/target/riscv/cpu_cfg.h b/target/riscv/cpu_cfg.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_cfg.h +++ b/target/riscv/cpu_cfg.h @@ -XXX,XX +XXX,XX @@ struct RISCVCPUConfig { * TCG always implement/can't be user disabled, * based on spec version. */ + bool has_priv_1_13; bool has_priv_1_12; bool has_priv_1_11; -- 2.45.2 From: "Fea.Wang" <fea.wang@sifive.com> Based on privilege 1.13 spec, there should be a bit56 for 'P1P13' in mstateen0 that controls access to the hedeleg. Signed-off-by: Fea.Wang <fea.wang@sifive.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Weiwei Li <liwei1518@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240606135454.119186-4-fea.wang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu_bits.h | 1 + target/riscv/csr.c | 8 ++++++++ 2 files changed, 9 insertions(+) diff --git a/target/riscv/cpu_bits.h b/target/riscv/cpu_bits.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_bits.h +++ b/target/riscv/cpu_bits.h @@ -XXX,XX +XXX,XX @@ #define SMSTATEEN0_CS (1ULL << 0) #define SMSTATEEN0_FCSR (1ULL << 1) #define SMSTATEEN0_JVT (1ULL << 2) +#define SMSTATEEN0_P1P13 (1ULL << 56) #define SMSTATEEN0_HSCONTXT (1ULL << 57) #define SMSTATEEN0_IMSIC (1ULL << 58) #define SMSTATEEN0_AIA (1ULL << 59) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException write_mstateen0(CPURISCVState *env, int csrno, wr_mask |= SMSTATEEN0_FCSR; } + if (env->priv_ver >= PRIV_VERSION_1_13_0) { + wr_mask |= SMSTATEEN0_P1P13; + } + return write_mstateen(env, csrno, wr_mask, new_val); } @@ -XXX,XX +XXX,XX @@ static RISCVException write_mstateen0h(CPURISCVState *env, int csrno, { uint64_t wr_mask = SMSTATEEN_STATEEN | SMSTATEEN0_HSENVCFG; + if (env->priv_ver >= PRIV_VERSION_1_13_0) { + wr_mask |= SMSTATEEN0_P1P13; + } + return write_mstateenh(env, csrno, wr_mask, new_val); } -- 2.45.2 From: "Fea.Wang" <fea.wang@sifive.com> Based on privileged spec 1.13, the RV32 needs to implement MEDELEGH and HEDELEGH for exception codes 32-47 for reserving and exception codes 48-63 for custom use. Add the CSR number though the implementation is just reading zero and writing ignore. Besides, for accessing HEDELEGH, it should be controlled by mstateen0 'P1P13' bit. Signed-off-by: Fea.Wang <fea.wang@sifive.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240606135454.119186-5-fea.wang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu_bits.h | 2 ++ target/riscv/csr.c | 31 +++++++++++++++++++++++++++++++ 2 files changed, 33 insertions(+) diff --git a/target/riscv/cpu_bits.h b/target/riscv/cpu_bits.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_bits.h +++ b/target/riscv/cpu_bits.h @@ -XXX,XX +XXX,XX @@ /* 32-bit only */ #define CSR_MSTATUSH 0x310 +#define CSR_MEDELEGH 0x312 +#define CSR_HEDELEGH 0x612 /* Machine Trap Handling */ #define CSR_MSCRATCH 0x340 diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException write_hedeleg(CPURISCVState *env, int csrno, return RISCV_EXCP_NONE; } +static RISCVException read_hedelegh(CPURISCVState *env, int csrno, + target_ulong *val) +{ + RISCVException ret; + ret = smstateen_acc_ok(env, 0, SMSTATEEN0_P1P13); + if (ret != RISCV_EXCP_NONE) { + return ret; + } + + /* Reserved, now read zero */ + *val = 0; + return RISCV_EXCP_NONE; +} + +static RISCVException write_hedelegh(CPURISCVState *env, int csrno, + target_ulong val) +{ + RISCVException ret; + ret = smstateen_acc_ok(env, 0, SMSTATEEN0_P1P13); + if (ret != RISCV_EXCP_NONE) { + return ret; + } + + /* Reserved, now write ignore */ + return RISCV_EXCP_NONE; +} + static RISCVException rmw_hvien64(CPURISCVState *env, int csrno, uint64_t *ret_val, uint64_t new_val, uint64_t wr_mask) @@ -XXX,XX +XXX,XX @@ riscv_csr_operations csr_ops[CSR_TABLE_SIZE] = { [CSR_MSTATUSH] = { "mstatush", any32, read_mstatush, write_mstatush }, + [CSR_MEDELEGH] = { "medelegh", any32, read_zero, write_ignore, + .min_priv_ver = PRIV_VERSION_1_13_0 }, + [CSR_HEDELEGH] = { "hedelegh", hmode32, read_hedelegh, write_hedelegh, + .min_priv_ver = PRIV_VERSION_1_13_0 }, /* Machine Trap Handling */ [CSR_MSCRATCH] = { "mscratch", any, read_mscratch, write_mscratch, -- 2.45.2 From: "Fea.Wang" <fea.wang@sifive.com> Based on the priv-1.13.0, add the exception codes for Software-check and Hardware-error. Signed-off-by: Fea.Wang <fea.wang@sifive.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240606135454.119186-6-fea.wang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu_bits.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/riscv/cpu_bits.h b/target/riscv/cpu_bits.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_bits.h +++ b/target/riscv/cpu_bits.h @@ -XXX,XX +XXX,XX @@ typedef enum RISCVException { RISCV_EXCP_INST_PAGE_FAULT = 0xc, /* since: priv-1.10.0 */ RISCV_EXCP_LOAD_PAGE_FAULT = 0xd, /* since: priv-1.10.0 */ RISCV_EXCP_STORE_PAGE_FAULT = 0xf, /* since: priv-1.10.0 */ + RISCV_EXCP_SW_CHECK = 0x12, /* since: priv-1.13.0 */ + RISCV_EXCP_HW_ERR = 0x13, /* since: priv-1.13.0 */ RISCV_EXCP_INST_GUEST_PAGE_FAULT = 0x14, RISCV_EXCP_LOAD_GUEST_ACCESS_FAULT = 0x15, RISCV_EXCP_VIRT_INSTRUCTION_FAULT = 0x16, -- 2.45.2 From: "Fea.Wang" <fea.wang@sifive.com> Add RISC-V privilege 1.13 support. Signed-off-by: Fea.Wang <fea.wang@sifive.com> Signed-off-by: Fea.Wang <fea.wang@sifive.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Weiwei Li <liwei1518@gmail.com> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Message-ID: <20240606135454.119186-7-fea.wang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 6 +++++- target/riscv/tcg/tcg-cpu.c | 4 ++++ 2 files changed, 9 insertions(+), 1 deletion(-) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static int priv_spec_from_str(const char *priv_spec_str) { int priv_version = -1; - if (!g_strcmp0(priv_spec_str, PRIV_VER_1_12_0_STR)) { + if (!g_strcmp0(priv_spec_str, PRIV_VER_1_13_0_STR)) { + priv_version = PRIV_VERSION_1_13_0; + } else if (!g_strcmp0(priv_spec_str, PRIV_VER_1_12_0_STR)) { priv_version = PRIV_VERSION_1_12_0; } else if (!g_strcmp0(priv_spec_str, PRIV_VER_1_11_0_STR)) { priv_version = PRIV_VERSION_1_11_0; @@ -XXX,XX +XXX,XX @@ const char *priv_spec_to_str(int priv_version) return PRIV_VER_1_11_0_STR; case PRIV_VERSION_1_12_0: return PRIV_VER_1_12_0_STR; + case PRIV_VERSION_1_13_0: + return PRIV_VER_1_13_0_STR; default: return NULL; } diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_update_named_features(RISCVCPU *cpu) cpu->cfg.has_priv_1_12 = true; } + if (cpu->env.priv_ver >= PRIV_VERSION_1_13_0) { + cpu->cfg.has_priv_1_13 = true; + } + /* zic64b is 1.12 or later */ cpu->cfg.ext_zic64b = cpu->cfg.cbom_blocksize == 64 && cpu->cfg.cbop_blocksize == 64 && -- 2.45.2 From: Sunil V L <sunilvl@ventanamicro.com> RISC-V virt is currently missing default type for block devices. Without this being set, proper backend is not created when option like -cdrom is used. So, make the virt board's default block device type be IF_VIRTIO similar to other architectures. We also need to set no_cdrom to avoid getting a default cdrom device. Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20240620064718.275427-1-sunilvl@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_machine_class_init(ObjectClass *oc, void *data) mc->init = virt_machine_init; mc->max_cpus = VIRT_CPUS_MAX; mc->default_cpu_type = TYPE_RISCV_CPU_BASE; + mc->block_default_type = IF_VIRTIO; + mc->no_cdrom = 1; mc->pci_allow_0_address = true; mc->possible_cpu_arch_ids = riscv_numa_possible_cpu_arch_ids; mc->cpu_index_to_instance_props = riscv_numa_cpu_index_to_props; -- 2.45.2 From: Branislav Brzak <brzakbranislav@gmail.com> helper_froundnx_h function mistakenly uses single percision nanbox check instead of the half percision one. This patch fixes the issue. Signed-off-by: Branislav Brzak <brzakbranislav@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20240608214546.226963-1-brzakbranislav@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/fpu_helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/riscv/fpu_helper.c b/target/riscv/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/fpu_helper.c +++ b/target/riscv/fpu_helper.c @@ -XXX,XX +XXX,XX @@ uint64_t helper_fround_h(CPURISCVState *env, uint64_t rs1) uint64_t helper_froundnx_h(CPURISCVState *env, uint64_t rs1) { - float16 frs1 = check_nanbox_s(env, rs1); + float16 frs1 = check_nanbox_h(env, rs1); frs1 = float16_round_to_int(frs1, &env->fp_status); return nanbox_h(env, frs1); } -- 2.45.2 From: Clément Léger <cleger@rivosinc.com> When icount is enabled, rather than returning the virtual CPU time, we should return the instruction count itself. Add an instructions bool parameter to get_ticks() to correctly return icount_get_raw() when icount_enabled() == 1 and instruction count is queried. This will modify the existing behavior which was returning an instructions count close to the number of cycles (CPI ~= 1). Signed-off-by: Clément Léger <cleger@rivosinc.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Message-ID: <20240618112649.76683-1-cleger@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 30 +++++++++++++++++------------- 1 file changed, 17 insertions(+), 13 deletions(-) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException write_vcsr(CPURISCVState *env, int csrno, } /* User Timers and Counters */ -static target_ulong get_ticks(bool shift) +static target_ulong get_ticks(bool shift, bool instructions) { int64_t val; target_ulong result; #if !defined(CONFIG_USER_ONLY) if (icount_enabled()) { - val = icount_get(); + if (instructions) { + val = icount_get_raw(); + } else { + val = icount_get(); + } } else { val = cpu_get_host_ticks(); } @@ -XXX,XX +XXX,XX @@ static RISCVException read_timeh(CPURISCVState *env, int csrno, static RISCVException read_hpmcounter(CPURISCVState *env, int csrno, target_ulong *val) { - *val = get_ticks(false); + *val = get_ticks(false, (csrno == CSR_INSTRET)); return RISCV_EXCP_NONE; } static RISCVException read_hpmcounterh(CPURISCVState *env, int csrno, target_ulong *val) { - *val = get_ticks(true); + *val = get_ticks(true, (csrno == CSR_INSTRETH)); return RISCV_EXCP_NONE; } @@ -XXX,XX +XXX,XX @@ static RISCVException write_mhpmcounter(CPURISCVState *env, int csrno, int ctr_idx = csrno - CSR_MCYCLE; PMUCTRState *counter = &env->pmu_ctrs[ctr_idx]; uint64_t mhpmctr_val = val; + bool instr = riscv_pmu_ctr_monitor_instructions(env, ctr_idx); counter->mhpmcounter_val = val; - if (riscv_pmu_ctr_monitor_cycles(env, ctr_idx) || - riscv_pmu_ctr_monitor_instructions(env, ctr_idx)) { - counter->mhpmcounter_prev = get_ticks(false); + if (riscv_pmu_ctr_monitor_cycles(env, ctr_idx) || instr) { + counter->mhpmcounter_prev = get_ticks(false, instr); if (ctr_idx > 2) { if (riscv_cpu_mxl(env) == MXL_RV32) { mhpmctr_val = mhpmctr_val | @@ -XXX,XX +XXX,XX @@ static RISCVException write_mhpmcounterh(CPURISCVState *env, int csrno, PMUCTRState *counter = &env->pmu_ctrs[ctr_idx]; uint64_t mhpmctr_val = counter->mhpmcounter_val; uint64_t mhpmctrh_val = val; + bool instr = riscv_pmu_ctr_monitor_instructions(env, ctr_idx); counter->mhpmcounterh_val = val; mhpmctr_val = mhpmctr_val | (mhpmctrh_val << 32); - if (riscv_pmu_ctr_monitor_cycles(env, ctr_idx) || - riscv_pmu_ctr_monitor_instructions(env, ctr_idx)) { - counter->mhpmcounterh_prev = get_ticks(true); + if (riscv_pmu_ctr_monitor_cycles(env, ctr_idx) || instr) { + counter->mhpmcounterh_prev = get_ticks(true, instr); if (ctr_idx > 2) { riscv_pmu_setup_timer(env, mhpmctr_val, ctr_idx); } @@ -XXX,XX +XXX,XX @@ static RISCVException riscv_pmu_read_ctr(CPURISCVState *env, target_ulong *val, counter->mhpmcounter_prev; target_ulong ctr_val = upper_half ? counter->mhpmcounterh_val : counter->mhpmcounter_val; + bool instr = riscv_pmu_ctr_monitor_instructions(env, ctr_idx); if (get_field(env->mcountinhibit, BIT(ctr_idx))) { /* @@ -XXX,XX +XXX,XX @@ static RISCVException riscv_pmu_read_ctr(CPURISCVState *env, target_ulong *val, * The kernel computes the perf delta by subtracting the current value from * the value it initialized previously (ctr_val). */ - if (riscv_pmu_ctr_monitor_cycles(env, ctr_idx) || - riscv_pmu_ctr_monitor_instructions(env, ctr_idx)) { - *val = get_ticks(upper_half) - ctr_prev + ctr_val; + if (riscv_pmu_ctr_monitor_cycles(env, ctr_idx) || instr) { + *val = get_ticks(upper_half, instr) - ctr_prev + ctr_val; } else { *val = ctr_val; } -- 2.45.2 From: Frank Chang <frank.chang@sifive.com> RISCVCPUImpliedExtsRule is created to store the implied rules. 'is_misa' flag is used to distinguish whether the rule is derived from the MISA or other extensions. 'ext' stores the MISA bit if 'is_misa' is true. Otherwise, it stores the offset of the extension defined in RISCVCPUConfig. 'ext' will also serve as the key of the hash tables to look up the rule in the following commit. Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Jerry Zhang Jian <jerry.zhangjian@sifive.com> Tested-by: Max Chou <max.chou@sifive.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240625114629.27793-2-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 23 +++++++++++++++++++++++ target/riscv/cpu.c | 8 ++++++++ 2 files changed, 31 insertions(+) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ typedef enum { EXT_STATUS_DIRTY, } RISCVExtStatus; +typedef struct riscv_cpu_implied_exts_rule { +#ifndef CONFIG_USER_ONLY + /* + * Bitmask indicates the rule enabled status for the harts. + * This enhancement is only available in system-mode QEMU, + * as we don't have a good way (e.g. mhartid) to distinguish + * the SMP cores in user-mode QEMU. + */ + unsigned long *enabled; +#endif + /* True if this is a MISA implied rule. */ + bool is_misa; + /* ext is MISA bit if is_misa flag is true, else multi extension offset. */ + const uint32_t ext; + const uint32_t implied_misa_exts; + const uint32_t implied_multi_exts[]; +} RISCVCPUImpliedExtsRule; + +extern RISCVCPUImpliedExtsRule *riscv_misa_ext_implied_rules[]; +extern RISCVCPUImpliedExtsRule *riscv_multi_ext_implied_rules[]; + +#define RISCV_IMPLIED_EXTS_RULE_END -1 + #define MMU_USER_IDX 3 #define MAX_RISCV_PMPS (16) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ RISCVCPUProfile *riscv_profiles[] = { NULL, }; +RISCVCPUImpliedExtsRule *riscv_misa_ext_implied_rules[] = { + NULL +}; + +RISCVCPUImpliedExtsRule *riscv_multi_ext_implied_rules[] = { + NULL +}; + static Property riscv_cpu_properties[] = { DEFINE_PROP_BOOL("debug", RISCVCPU, cfg.debug, true), -- 2.45.2 From: Frank Chang <frank.chang@sifive.com> Introduce helpers to enable the extensions based on the implied rules. The implied extensions are enabled recursively, so we don't have to expand all of them manually. This also eliminates the old-fashioned ordering requirement. For example, Zvksg implies Zvks, Zvks implies Zvksed, etc., removing the need to check the implied rules of Zvksg before Zvks. Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Jerry Zhang Jian <jerry.zhangjian@sifive.com> Tested-by: Max Chou <max.chou@sifive.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20240625114629.27793-3-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 121 +++++++++++++++++++++++++++++++++++++ 1 file changed, 121 insertions(+) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ #include "hw/core/accel-cpu.h" #include "hw/core/tcg-cpu-ops.h" #include "tcg/tcg.h" +#ifndef CONFIG_USER_ONLY +#include "hw/boards.h" +#endif /* Hash that stores user set extensions */ static GHashTable *multi_ext_user_opts; static GHashTable *misa_ext_user_opts; +static GHashTable *multi_ext_implied_rules; +static GHashTable *misa_ext_implied_rules; + static bool cpu_cfg_ext_is_user_set(uint32_t ext_offset) { return g_hash_table_contains(multi_ext_user_opts, @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_validate_profiles(RISCVCPU *cpu) } } +static void riscv_cpu_init_implied_exts_rules(void) +{ + RISCVCPUImpliedExtsRule *rule; +#ifndef CONFIG_USER_ONLY + MachineState *ms = MACHINE(qdev_get_machine()); +#endif + static bool initialized; + int i; + + /* Implied rules only need to be initialized once. */ + if (initialized) { + return; + } + + for (i = 0; (rule = riscv_misa_ext_implied_rules[i]); i++) { +#ifndef CONFIG_USER_ONLY + rule->enabled = bitmap_new(ms->smp.cpus); +#endif + g_hash_table_insert(misa_ext_implied_rules, + GUINT_TO_POINTER(rule->ext), (gpointer)rule); + } + + for (i = 0; (rule = riscv_multi_ext_implied_rules[i]); i++) { +#ifndef CONFIG_USER_ONLY + rule->enabled = bitmap_new(ms->smp.cpus); +#endif + g_hash_table_insert(multi_ext_implied_rules, + GUINT_TO_POINTER(rule->ext), (gpointer)rule); + } + + initialized = true; +} + +static void cpu_enable_implied_rule(RISCVCPU *cpu, + RISCVCPUImpliedExtsRule *rule) +{ + CPURISCVState *env = &cpu->env; + RISCVCPUImpliedExtsRule *ir; + bool enabled = false; + int i; + +#ifndef CONFIG_USER_ONLY + enabled = test_bit(cpu->env.mhartid, rule->enabled); +#endif + + if (!enabled) { + /* Enable the implied MISAs. */ + if (rule->implied_misa_exts) { + riscv_cpu_set_misa_ext(env, + env->misa_ext | rule->implied_misa_exts); + + for (i = 0; misa_bits[i] != 0; i++) { + if (rule->implied_misa_exts & misa_bits[i]) { + ir = g_hash_table_lookup(misa_ext_implied_rules, + GUINT_TO_POINTER(misa_bits[i])); + + if (ir) { + cpu_enable_implied_rule(cpu, ir); + } + } + } + } + + /* Enable the implied extensions. */ + for (i = 0; + rule->implied_multi_exts[i] != RISCV_IMPLIED_EXTS_RULE_END; i++) { + cpu_cfg_ext_auto_update(cpu, rule->implied_multi_exts[i], true); + + ir = g_hash_table_lookup(multi_ext_implied_rules, + GUINT_TO_POINTER( + rule->implied_multi_exts[i])); + + if (ir) { + cpu_enable_implied_rule(cpu, ir); + } + } + +#ifndef CONFIG_USER_ONLY + bitmap_set(rule->enabled, cpu->env.mhartid, 1); +#endif + } +} + +static void riscv_cpu_enable_implied_rules(RISCVCPU *cpu) +{ + RISCVCPUImpliedExtsRule *rule; + int i; + + /* Enable the implied MISAs. */ + for (i = 0; (rule = riscv_misa_ext_implied_rules[i]); i++) { + if (riscv_has_ext(&cpu->env, rule->ext)) { + cpu_enable_implied_rule(cpu, rule); + } + } + + /* Enable the implied extensions. */ + for (i = 0; (rule = riscv_multi_ext_implied_rules[i]); i++) { + if (isa_ext_is_enabled(cpu, rule->ext)) { + cpu_enable_implied_rule(cpu, rule); + } + } +} + void riscv_tcg_cpu_finalize_features(RISCVCPU *cpu, Error **errp) { CPURISCVState *env = &cpu->env; Error *local_err = NULL; + riscv_cpu_init_implied_exts_rules(); + riscv_cpu_enable_implied_rules(cpu); + riscv_cpu_validate_misa_priv(env, &local_err); if (local_err != NULL) { error_propagate(errp, local_err); @@ -XXX,XX +XXX,XX @@ static void riscv_tcg_cpu_instance_init(CPUState *cs) misa_ext_user_opts = g_hash_table_new(NULL, g_direct_equal); multi_ext_user_opts = g_hash_table_new(NULL, g_direct_equal); + + if (!misa_ext_implied_rules) { + misa_ext_implied_rules = g_hash_table_new(NULL, g_direct_equal); + } + + if (!multi_ext_implied_rules) { + multi_ext_implied_rules = g_hash_table_new(NULL, g_direct_equal); + } + riscv_cpu_add_user_properties(obj); if (riscv_cpu_has_max_extensions(obj)) { -- 2.45.2 From: Frank Chang <frank.chang@sifive.com> Add MISA extension implied rules to enable the implied extensions of MISA recursively. Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Jerry Zhang Jian <jerry.zhangjian@sifive.com> Tested-by: Max Chou <max.chou@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20240625114629.27793-4-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 50 +++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 49 insertions(+), 1 deletion(-) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ RISCVCPUProfile *riscv_profiles[] = { NULL, }; +static RISCVCPUImpliedExtsRule RVA_IMPLIED = { + .is_misa = true, + .ext = RVA, + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_zalrsc), CPU_CFG_OFFSET(ext_zaamo), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + +static RISCVCPUImpliedExtsRule RVD_IMPLIED = { + .is_misa = true, + .ext = RVD, + .implied_misa_exts = RVF, + .implied_multi_exts = { RISCV_IMPLIED_EXTS_RULE_END }, +}; + +static RISCVCPUImpliedExtsRule RVF_IMPLIED = { + .is_misa = true, + .ext = RVF, + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_zicsr), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + +static RISCVCPUImpliedExtsRule RVM_IMPLIED = { + .is_misa = true, + .ext = RVM, + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_zmmul), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + +static RISCVCPUImpliedExtsRule RVV_IMPLIED = { + .is_misa = true, + .ext = RVV, + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_zve64d), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + RISCVCPUImpliedExtsRule *riscv_misa_ext_implied_rules[] = { - NULL + &RVA_IMPLIED, &RVD_IMPLIED, &RVF_IMPLIED, + &RVM_IMPLIED, &RVV_IMPLIED, NULL }; RISCVCPUImpliedExtsRule *riscv_multi_ext_implied_rules[] = { -- 2.45.2 From: Frank Chang <frank.chang@sifive.com> Add multi extension implied rules to enable the implied extensions of the multi extension recursively. Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Jerry Zhang Jian <jerry.zhangjian@sifive.com> Tested-by: Max Chou <max.chou@sifive.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20240625114629.27793-5-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 340 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 340 insertions(+) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static RISCVCPUImpliedExtsRule RVV_IMPLIED = { }, }; +static RISCVCPUImpliedExtsRule ZCB_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_zcb), + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_zca), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + +static RISCVCPUImpliedExtsRule ZCD_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_zcd), + .implied_misa_exts = RVD, + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_zca), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + +static RISCVCPUImpliedExtsRule ZCE_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_zce), + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_zcb), CPU_CFG_OFFSET(ext_zcmp), + CPU_CFG_OFFSET(ext_zcmt), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + +static RISCVCPUImpliedExtsRule ZCF_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_zcf), + .implied_misa_exts = RVF, + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_zca), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + +static RISCVCPUImpliedExtsRule ZCMP_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_zcmp), + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_zca), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + +static RISCVCPUImpliedExtsRule ZCMT_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_zcmt), + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_zca), CPU_CFG_OFFSET(ext_zicsr), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + +static RISCVCPUImpliedExtsRule ZDINX_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_zdinx), + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_zfinx), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + +static RISCVCPUImpliedExtsRule ZFA_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_zfa), + .implied_misa_exts = RVF, + .implied_multi_exts = { RISCV_IMPLIED_EXTS_RULE_END }, +}; + +static RISCVCPUImpliedExtsRule ZFBFMIN_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_zfbfmin), + .implied_misa_exts = RVF, + .implied_multi_exts = { RISCV_IMPLIED_EXTS_RULE_END }, +}; + +static RISCVCPUImpliedExtsRule ZFH_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_zfh), + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_zfhmin), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + +static RISCVCPUImpliedExtsRule ZFHMIN_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_zfhmin), + .implied_misa_exts = RVF, + .implied_multi_exts = { RISCV_IMPLIED_EXTS_RULE_END }, +}; + +static RISCVCPUImpliedExtsRule ZFINX_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_zfinx), + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_zicsr), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + +static RISCVCPUImpliedExtsRule ZHINX_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_zhinx), + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_zhinxmin), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + +static RISCVCPUImpliedExtsRule ZHINXMIN_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_zhinxmin), + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_zfinx), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + +static RISCVCPUImpliedExtsRule ZICNTR_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_zicntr), + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_zicsr), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + +static RISCVCPUImpliedExtsRule ZIHPM_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_zihpm), + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_zicsr), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + +static RISCVCPUImpliedExtsRule ZK_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_zk), + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_zkn), CPU_CFG_OFFSET(ext_zkr), + CPU_CFG_OFFSET(ext_zkt), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + +static RISCVCPUImpliedExtsRule ZKN_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_zkn), + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_zbkb), CPU_CFG_OFFSET(ext_zbkc), + CPU_CFG_OFFSET(ext_zbkx), CPU_CFG_OFFSET(ext_zkne), + CPU_CFG_OFFSET(ext_zknd), CPU_CFG_OFFSET(ext_zknh), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + +static RISCVCPUImpliedExtsRule ZKS_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_zks), + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_zbkb), CPU_CFG_OFFSET(ext_zbkc), + CPU_CFG_OFFSET(ext_zbkx), CPU_CFG_OFFSET(ext_zksed), + CPU_CFG_OFFSET(ext_zksh), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + +static RISCVCPUImpliedExtsRule ZVBB_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_zvbb), + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_zvkb), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + +static RISCVCPUImpliedExtsRule ZVE32F_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_zve32f), + .implied_misa_exts = RVF, + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_zve32x), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + +static RISCVCPUImpliedExtsRule ZVE32X_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_zve32x), + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_zicsr), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + +static RISCVCPUImpliedExtsRule ZVE64D_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_zve64d), + .implied_misa_exts = RVD, + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_zve64f), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + +static RISCVCPUImpliedExtsRule ZVE64F_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_zve64f), + .implied_misa_exts = RVF, + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_zve32f), CPU_CFG_OFFSET(ext_zve64x), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + +static RISCVCPUImpliedExtsRule ZVE64X_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_zve64x), + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_zve32x), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + +static RISCVCPUImpliedExtsRule ZVFBFMIN_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_zvfbfmin), + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_zve32f), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + +static RISCVCPUImpliedExtsRule ZVFBFWMA_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_zvfbfwma), + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_zvfbfmin), CPU_CFG_OFFSET(ext_zfbfmin), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + +static RISCVCPUImpliedExtsRule ZVFH_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_zvfh), + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_zvfhmin), CPU_CFG_OFFSET(ext_zfhmin), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + +static RISCVCPUImpliedExtsRule ZVFHMIN_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_zvfhmin), + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_zve32f), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + +static RISCVCPUImpliedExtsRule ZVKN_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_zvkn), + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_zvkned), CPU_CFG_OFFSET(ext_zvknhb), + CPU_CFG_OFFSET(ext_zvkb), CPU_CFG_OFFSET(ext_zvkt), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + +static RISCVCPUImpliedExtsRule ZVKNC_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_zvknc), + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_zvkn), CPU_CFG_OFFSET(ext_zvbc), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + +static RISCVCPUImpliedExtsRule ZVKNG_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_zvkng), + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_zvkn), CPU_CFG_OFFSET(ext_zvkg), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + +static RISCVCPUImpliedExtsRule ZVKNHB_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_zvknhb), + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_zve64x), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + +static RISCVCPUImpliedExtsRule ZVKS_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_zvks), + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_zvksed), CPU_CFG_OFFSET(ext_zvksh), + CPU_CFG_OFFSET(ext_zvkb), CPU_CFG_OFFSET(ext_zvkt), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + +static RISCVCPUImpliedExtsRule ZVKSC_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_zvksc), + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_zvks), CPU_CFG_OFFSET(ext_zvbc), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + +static RISCVCPUImpliedExtsRule ZVKSG_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_zvksg), + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_zvks), CPU_CFG_OFFSET(ext_zvkg), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + RISCVCPUImpliedExtsRule *riscv_misa_ext_implied_rules[] = { &RVA_IMPLIED, &RVD_IMPLIED, &RVF_IMPLIED, &RVM_IMPLIED, &RVV_IMPLIED, NULL }; RISCVCPUImpliedExtsRule *riscv_multi_ext_implied_rules[] = { + &ZCB_IMPLIED, &ZCD_IMPLIED, &ZCE_IMPLIED, + &ZCF_IMPLIED, &ZCMP_IMPLIED, &ZCMT_IMPLIED, + &ZDINX_IMPLIED, &ZFA_IMPLIED, &ZFBFMIN_IMPLIED, + &ZFH_IMPLIED, &ZFHMIN_IMPLIED, &ZFINX_IMPLIED, + &ZHINX_IMPLIED, &ZHINXMIN_IMPLIED, &ZICNTR_IMPLIED, + &ZIHPM_IMPLIED, &ZK_IMPLIED, &ZKN_IMPLIED, + &ZKS_IMPLIED, &ZVBB_IMPLIED, &ZVE32F_IMPLIED, + &ZVE32X_IMPLIED, &ZVE64D_IMPLIED, &ZVE64F_IMPLIED, + &ZVE64X_IMPLIED, &ZVFBFMIN_IMPLIED, &ZVFBFWMA_IMPLIED, + &ZVFH_IMPLIED, &ZVFHMIN_IMPLIED, &ZVKN_IMPLIED, + &ZVKNC_IMPLIED, &ZVKNG_IMPLIED, &ZVKNHB_IMPLIED, + &ZVKS_IMPLIED, &ZVKSC_IMPLIED, &ZVKSG_IMPLIED, NULL }; -- 2.45.2 From: Frank Chang <frank.chang@sifive.com> Zc extension has special implied rules that need to be handled separately. Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Jerry Zhang Jian <jerry.zhangjian@sifive.com> Tested-by: Max Chou <max.chou@sifive.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20240625114629.27793-6-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void cpu_enable_implied_rule(RISCVCPU *cpu, } } +/* Zc extension has special implied rules that need to be handled separately. */ +static void cpu_enable_zc_implied_rules(RISCVCPU *cpu) +{ + RISCVCPUClass *mcc = RISCV_CPU_GET_CLASS(cpu); + CPURISCVState *env = &cpu->env; + + if (cpu->cfg.ext_zce) { + cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zca), true); + cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zcb), true); + cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zcmp), true); + cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zcmt), true); + + if (riscv_has_ext(env, RVF) && mcc->misa_mxl_max == MXL_RV32) { + cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zcf), true); + } + } + + /* Zca, Zcd and Zcf has a PRIV 1.12.0 restriction */ + if (riscv_has_ext(env, RVC) && env->priv_ver >= PRIV_VERSION_1_12_0) { + cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zca), true); + + if (riscv_has_ext(env, RVF) && mcc->misa_mxl_max == MXL_RV32) { + cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zcf), true); + } + + if (riscv_has_ext(env, RVD)) { + cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zcd), true); + } + } +} + static void riscv_cpu_enable_implied_rules(RISCVCPU *cpu) { RISCVCPUImpliedExtsRule *rule; int i; + /* Enable the implied extensions for Zc. */ + cpu_enable_zc_implied_rules(cpu); + /* Enable the implied MISAs. */ for (i = 0; (rule = riscv_misa_ext_implied_rules[i]); i++) { if (riscv_has_ext(&cpu->env, rule->ext)) { -- 2.45.2 From: Frank Chang <frank.chang@sifive.com> Remove the old-fashioned extension auto-update check statements as they are replaced by the extension implied rules. Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Jerry Zhang Jian <jerry.zhangjian@sifive.com> Tested-by: Max Chou <max.chou@sifive.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20240625114629.27793-7-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 119 ------------------------------------- 1 file changed, 119 deletions(-) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ void riscv_cpu_validate_set_extensions(RISCVCPU *cpu, Error **errp) return; } - if (cpu->cfg.ext_zfh) { - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zfhmin), true); - } - if (cpu->cfg.ext_zfhmin && !riscv_has_ext(env, RVF)) { error_setg(errp, "Zfh/Zfhmin extensions require F extension"); return; @@ -XXX,XX +XXX,XX @@ void riscv_cpu_validate_set_extensions(RISCVCPU *cpu, Error **errp) error_propagate(errp, local_err); return; } - - /* The V vector extension depends on the Zve64d extension */ - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zve64d), true); } /* The Zve64d extension depends on the Zve64f extension */ @@ -XXX,XX +XXX,XX @@ void riscv_cpu_validate_set_extensions(RISCVCPU *cpu, Error **errp) error_setg(errp, "Zve64d/V extensions require D extension"); return; } - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zve64f), true); - } - - /* The Zve64f extension depends on the Zve64x and Zve32f extensions */ - if (cpu->cfg.ext_zve64f) { - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zve64x), true); - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zve32f), true); - } - - /* The Zve64x extension depends on the Zve32x extension */ - if (cpu->cfg.ext_zve64x) { - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zve32x), true); } /* The Zve32f extension depends on the Zve32x extension */ @@ -XXX,XX +XXX,XX @@ void riscv_cpu_validate_set_extensions(RISCVCPU *cpu, Error **errp) error_setg(errp, "Zve32f/Zve64f extensions require F extension"); return; } - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zve32x), true); - } - - if (cpu->cfg.ext_zvfh) { - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zvfhmin), true); } if (cpu->cfg.ext_zvfhmin && !cpu->cfg.ext_zve32f) { @@ -XXX,XX +XXX,XX @@ void riscv_cpu_validate_set_extensions(RISCVCPU *cpu, Error **errp) return; } - /* Set the ISA extensions, checks should have happened above */ - if (cpu->cfg.ext_zhinx) { - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zca), true); - } - if ((cpu->cfg.ext_zdinx || cpu->cfg.ext_zhinxmin) && !cpu->cfg.ext_zfinx) { error_setg(errp, "Zdinx/Zhinx/Zhinxmin extensions require Zfinx"); return; @@ -XXX,XX +XXX,XX @@ void riscv_cpu_validate_set_extensions(RISCVCPU *cpu, Error **errp) } } - if (cpu->cfg.ext_zce) { - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zca), true); - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zcb), true); - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zcmp), true); - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zcmt), true); - if (riscv_has_ext(env, RVF) && mcc->misa_mxl_max == MXL_RV32) { - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zcf), true); - } - } - - /* zca, zcd and zcf has a PRIV 1.12.0 restriction */ - if (riscv_has_ext(env, RVC) && env->priv_ver >= PRIV_VERSION_1_12_0) { - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zca), true); - if (riscv_has_ext(env, RVF) && mcc->misa_mxl_max == MXL_RV32) { - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zcf), true); - } - if (riscv_has_ext(env, RVD)) { - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zcd), true); - } - } - if (mcc->misa_mxl_max != MXL_RV32 && cpu->cfg.ext_zcf) { error_setg(errp, "Zcf extension is only relevant to RV32"); return; @@ -XXX,XX +XXX,XX @@ void riscv_cpu_validate_set_extensions(RISCVCPU *cpu, Error **errp) return; } - /* - * Shorthand vector crypto extensions - */ - if (cpu->cfg.ext_zvknc) { - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zvkn), true); - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zvbc), true); - } - - if (cpu->cfg.ext_zvkng) { - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zvkn), true); - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zvkg), true); - } - - if (cpu->cfg.ext_zvkn) { - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zvkned), true); - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zvknhb), true); - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zvkb), true); - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zvkt), true); - } - - if (cpu->cfg.ext_zvksc) { - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zvks), true); - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zvbc), true); - } - - if (cpu->cfg.ext_zvksg) { - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zvks), true); - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zvkg), true); - } - - if (cpu->cfg.ext_zvks) { - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zvksed), true); - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zvksh), true); - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zvkb), true); - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zvkt), true); - } - - if (cpu->cfg.ext_zvkt) { - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zvbb), true); - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zvbc), true); - } - - if (cpu->cfg.ext_zvbb) { - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zvkb), true); - } - if ((cpu->cfg.ext_zvbb || cpu->cfg.ext_zvkb || cpu->cfg.ext_zvkg || cpu->cfg.ext_zvkned || cpu->cfg.ext_zvknha || cpu->cfg.ext_zvksed || cpu->cfg.ext_zvksh) && !cpu->cfg.ext_zve32x) { @@ -XXX,XX +XXX,XX @@ void riscv_cpu_validate_set_extensions(RISCVCPU *cpu, Error **errp) return; } - if (cpu->cfg.ext_zk) { - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zkn), true); - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zkr), true); - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zkt), true); - } - - if (cpu->cfg.ext_zkn) { - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zbkb), true); - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zbkc), true); - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zbkx), true); - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zkne), true); - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zknd), true); - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zknh), true); - } - - if (cpu->cfg.ext_zks) { - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zbkb), true); - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zbkc), true); - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zbkx), true); - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zksed), true); - cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zksh), true); - } - if (cpu->cfg.ext_zicntr && !cpu->cfg.ext_zicsr) { if (cpu_cfg_ext_is_user_set(CPU_CFG_OFFSET(ext_zicntr))) { error_setg(errp, "zicntr requires zicsr"); -- 2.45.2 From: Alvin Chang <alvinga@andestech.com> According to RISC-V Debug specification version 0.13 [1] (also applied to version 1.0 [2] but it has not been ratified yet), there are several common matching conditions before firing a trigger, including the enabled privilege levels of the trigger. This commit adds trigger_common_match() to prepare the common matching conditions for the type 2/3/6 triggers. For now, we just implement trigger_priv_match() to check if the enabled privilege levels of the trigger match CPU's current privilege level. Remove the related code in riscv_cpu_debug_check_breakpoint() and invoke trigger_common_match() to check the privilege levels of the type 2 and type 6 triggers for the breakpoints. This commit also changes the behavior of looping the triggers. In previous implementation, if we have a type 2 trigger and env->virt_enabled is true, we directly return false to stop the loop. Now we keep looping all the triggers until we find a matched trigger. Only the execution bit and the executed PC should be futher checked in riscv_cpu_debug_check_breakpoint(). [1]: https://github.com/riscv/riscv-debug-spec/releases/tag/task_group_vote [2]: https://github.com/riscv/riscv-debug-spec/releases/tag/1.0.0-rc1-asciidoc Signed-off-by: Alvin Chang <alvinga@andestech.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240626132247.2761286-2-alvinga@andestech.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/debug.c | 101 +++++++++++++++++++++++++++++++++---------- 1 file changed, 78 insertions(+), 23 deletions(-) diff --git a/target/riscv/debug.c b/target/riscv/debug.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/debug.c +++ b/target/riscv/debug.c @@ -XXX,XX +XXX,XX @@ static void do_trigger_action(CPURISCVState *env, target_ulong trigger_index) } } +/* + * Check the privilege level of specific trigger matches CPU's current privilege + * level. + */ +static bool trigger_priv_match(CPURISCVState *env, trigger_type_t type, + int trigger_index) +{ + target_ulong ctrl = env->tdata1[trigger_index]; + + switch (type) { + case TRIGGER_TYPE_AD_MATCH: + /* type 2 trigger cannot be fired in VU/VS mode */ + if (env->virt_enabled) { + return false; + } + /* check U/S/M bit against current privilege level */ + if ((ctrl >> 3) & BIT(env->priv)) { + return true; + } + break; + case TRIGGER_TYPE_AD_MATCH6: + if (env->virt_enabled) { + /* check VU/VS bit against current privilege level */ + if ((ctrl >> 23) & BIT(env->priv)) { + return true; + } + } else { + /* check U/S/M bit against current privilege level */ + if ((ctrl >> 3) & BIT(env->priv)) { + return true; + } + } + break; + case TRIGGER_TYPE_INST_CNT: + if (env->virt_enabled) { + /* check VU/VS bit against current privilege level */ + if ((ctrl >> 25) & BIT(env->priv)) { + return true; + } + } else { + /* check U/S/M bit against current privilege level */ + if ((ctrl >> 6) & BIT(env->priv)) { + return true; + } + } + break; + case TRIGGER_TYPE_INT: + case TRIGGER_TYPE_EXCP: + case TRIGGER_TYPE_EXT_SRC: + qemu_log_mask(LOG_UNIMP, "trigger type: %d is not supported\n", type); + break; + case TRIGGER_TYPE_NO_EXIST: + case TRIGGER_TYPE_UNAVAIL: + qemu_log_mask(LOG_GUEST_ERROR, "trigger type: %d does not exist\n", + type); + break; + default: + g_assert_not_reached(); + } + + return false; +} + +/* Common matching conditions for all types of the triggers. */ +static bool trigger_common_match(CPURISCVState *env, trigger_type_t type, + int trigger_index) +{ + return trigger_priv_match(env, type, trigger_index); +} + /* type 2 trigger */ static uint32_t type2_breakpoint_size(CPURISCVState *env, target_ulong ctrl) @@ -XXX,XX +XXX,XX @@ bool riscv_cpu_debug_check_breakpoint(CPUState *cs) for (i = 0; i < RV_MAX_TRIGGERS; i++) { trigger_type = get_trigger_type(env, i); + if (!trigger_common_match(env, trigger_type, i)) { + continue; + } + switch (trigger_type) { case TRIGGER_TYPE_AD_MATCH: - /* type 2 trigger cannot be fired in VU/VS mode */ - if (env->virt_enabled) { - return false; - } - ctrl = env->tdata1[i]; pc = env->tdata2[i]; if ((ctrl & TYPE2_EXEC) && (bp->pc == pc)) { - /* check U/S/M bit against current privilege level */ - if ((ctrl >> 3) & BIT(env->priv)) { - env->badaddr = pc; - return true; - } + env->badaddr = pc; + return true; } break; case TRIGGER_TYPE_AD_MATCH6: @@ -XXX,XX +XXX,XX @@ bool riscv_cpu_debug_check_breakpoint(CPUState *cs) pc = env->tdata2[i]; if ((ctrl & TYPE6_EXEC) && (bp->pc == pc)) { - if (env->virt_enabled) { - /* check VU/VS bit against current privilege level */ - if ((ctrl >> 23) & BIT(env->priv)) { - env->badaddr = pc; - return true; - } - } else { - /* check U/S/M bit against current privilege level */ - if ((ctrl >> 3) & BIT(env->priv)) { - env->badaddr = pc; - return true; - } - } + env->badaddr = pc; + return true; } break; default: -- 2.45.2 From: Alvin Chang <alvinga@andestech.com> We have implemented trigger_common_match(), which checks if the enabled privilege levels of the trigger match CPU's current privilege level. Remove the related code in riscv_cpu_debug_check_watchpoint() and invoke trigger_common_match() to check the privilege levels of the type 2 and type 6 triggers for the watchpoints. This commit also changes the behavior of looping the triggers. In previous implementation, if we have a type 2 trigger and env->virt_enabled is true, we directly return false to stop the loop. Now we keep looping all the triggers until we find a matched trigger. Only load/store bits and loaded/stored address should be further checked in riscv_cpu_debug_check_watchpoint(). Signed-off-by: Alvin Chang <alvinga@andestech.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240626132247.2761286-3-alvinga@andestech.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/debug.c | 26 ++++++-------------------- 1 file changed, 6 insertions(+), 20 deletions(-) diff --git a/target/riscv/debug.c b/target/riscv/debug.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/debug.c +++ b/target/riscv/debug.c @@ -XXX,XX +XXX,XX @@ bool riscv_cpu_debug_check_watchpoint(CPUState *cs, CPUWatchpoint *wp) for (i = 0; i < RV_MAX_TRIGGERS; i++) { trigger_type = get_trigger_type(env, i); + if (!trigger_common_match(env, trigger_type, i)) { + continue; + } + switch (trigger_type) { case TRIGGER_TYPE_AD_MATCH: - /* type 2 trigger cannot be fired in VU/VS mode */ - if (env->virt_enabled) { - return false; - } - ctrl = env->tdata1[i]; addr = env->tdata2[i]; flags = 0; @@ -XXX,XX +XXX,XX @@ bool riscv_cpu_debug_check_watchpoint(CPUState *cs, CPUWatchpoint *wp) } if ((wp->flags & flags) && (wp->vaddr == addr)) { - /* check U/S/M bit against current privilege level */ - if ((ctrl >> 3) & BIT(env->priv)) { - return true; - } + return true; } break; case TRIGGER_TYPE_AD_MATCH6: @@ -XXX,XX +XXX,XX @@ bool riscv_cpu_debug_check_watchpoint(CPUState *cs, CPUWatchpoint *wp) } if ((wp->flags & flags) && (wp->vaddr == addr)) { - if (env->virt_enabled) { - /* check VU/VS bit against current privilege level */ - if ((ctrl >> 23) & BIT(env->priv)) { - return true; - } - } else { - /* check U/S/M bit against current privilege level */ - if ((ctrl >> 3) & BIT(env->priv)) { - return true; - } - } + return true; } break; default: -- 2.45.2 From: Alvin Chang <alvinga@andestech.com> We have implemented trigger_common_match(), which checks if the enabled privilege levels of the trigger match CPU's current privilege level. We can invoke trigger_common_match() to check the privilege levels of the type 3 triggers. Signed-off-by: Alvin Chang <alvinga@andestech.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240626132247.2761286-4-alvinga@andestech.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/debug.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/riscv/debug.c b/target/riscv/debug.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/debug.c +++ b/target/riscv/debug.c @@ -XXX,XX +XXX,XX @@ void helper_itrigger_match(CPURISCVState *env) if (get_trigger_type(env, i) != TRIGGER_TYPE_INST_CNT) { continue; } - if (check_itrigger_priv(env, i)) { + if (!trigger_common_match(env, TRIGGER_TYPE_INST_CNT, i)) { continue; } count = itrigger_get_count(env, i); -- 2.45.2 From: Alistair Francis <alistair.francis@wdc.com> The following changes since commit f5a2438405d4ae8b62de7c9b39fac0b2155ee544: Merge tag 'pull-qapi-2026-05-21' of https://repo.or.cz/qemu/armbru into staging (2026-05-21 09:00:22 -0400) are available in the Git repository at: https://github.com/alistair23/qemu.git tags/pull-riscv-to-apply-20260522 for you to fetch changes up to b7d87fb10d53a918e9c4a3dfe1fb06ce42c52526: hw/riscv: riscv-iommu: Re-process command queue after clearing CMD_ILL (2026-05-22 09:59:21 +1000) ---------------------------------------------------------------- RISC-V PR for 11.1. * Remove spike as default machine * Deprecate the shakti_c machine * Set MISA.[C|X] based on the selected extensions * Update Maintainers for OpenSBI Firmware * Update OpenSBI to v1.8.1 * Avoid RISCVCPU copy in PMU FDT setup * A collection of specification compliance improvements * Fix Svnapot 64KB pages * Handle source overlap of vector widening reduction instructions * Check interrupt in SiFive UART after txctrl register is written * Fix medeleg[11] read-only zero bit for M-mode ECALL * Fix tail handling for vmv.s.x and vfmv.s.f * Update the local AIA interrupt mask * Add KVM support for Zicbop and BFloat16 extensions * Fix the IOMMU FSC SV32 capability check * Avoid caching PCI device IDs in the IOMMU * Implement Microchip mpfs ioscb PLLs and sysreg clock dividers * Remove the internal CPU riscv_cpu_* arrays * Fix IOCOUNTINH.CY toggle detection * Fix the read of pmpaddr(0-63) CSRs * Make hpmcounterh return the upper 32-bits * Minor fixes and enhancements of RISC-V AIA devices * Re-process IOMMU command queue after clearing CMD_ILL ---------------------------------------------------------------- Abhigyan Kumar (1): target/riscv: Fix medeleg[11] read-only zero bit for M-mode ECALL Alistair Francis (4): target/riscv: Remove spike as default machine target/riscv: Deprecate the shakti_c machine MAINTAINERS: Maintain OpenSBI Firmware target/riscv: Update the local interrupt mask Andrew Jones (1): hw/riscv/riscv-iommu: Fix Svnapot 64KB pages Anton Blanchard (1): target/riscv: rvv: Handle source overlap of vector widening reduction instructions Chengbo Gao (1): hw/riscv/riscv-iommu: Avoid caching PCI device IDs Daniel Henrique Barboza (16): roms/opensbi: Update to v1.8.1 target/riscv/cpu.c: add xlrbr isa_edata_arr[] entry target/riscv/cpu.c: fix smctr/ssctr isa_edata_arr[] order target/riscv: make riscv-qmp-cmds use isa_data_arr[] target/riscv/tcg: treat all exts equally in cpu_disable_priv_spec_isa_exts target/riscv/tcg: use only isa_edata_arr[] in cpu_cfg_ext_get_name() target/riscv/cpu.c: remove riscv_cpu_enable_named_feat() target/riscv: remove riscv_cpu_named_features[] target/riscv/tcg: use isa_edata_arr[] in riscv_cpu_update_misa_x() target/riscv/kvm: use isa_edata_arr[] for unavailable props target/riscv/tcg: use isa_edata_arr[] to enable max exts target/riscv/tcg: use cfg_offset as cpu_set_multi_ext cb opaque target/riscv: do not set defaults in cpu prop callback target/riscv/tcg: use isa_edata_arr[] to create user props target/riscv/cpu: remove riscv_cpu_* arrays target/riscv/csr.c: fix read of pmpaddr(0-63) CSRs Fangyu Yu (1): hw/riscv/riscv-iommu: Fix IOCOUNTINH.CY toggle detection Frank Chang (3): target/riscv: Update MISA.C for Zc* extensions target/riscv: Update MISA.X for non-standard extensions hw/char: Check interrupt after txctrl register is written Guenter Roeck (1): hw: misc: Implement Microchip mpfs ioscb PLLs and sysreg clock dividers Jay Chang (1): hw/riscv: riscv-iommu: Re-process command queue after clearing CMD_ILL Jim Shu (4): hw/intc: riscv_aplic: Fix level trigger IRQ in direct delivery mode hw/intc: riscv_aplic: Add reset API to APLIC hw/intc: riscv_imsic: Add reset API to IMSIC hw/intc: riscv_aplic: add trace events of APLIC read/write function Mohamed Ayman (1): riscv: virt: avoid RISCVCPU copy in PMU FDT setup Portia Stephens (1): target/riscv: Make hpmcounterh return the upper 32-bits Zishun Yi (9): target/riscv: Allow mseccfg access based on ext_zicfilp target/riscv: add Zvknha as an implied extension for Zvknhb target/riscv: Remove unconditional MENVCFG_CDE from mask target/riscv: Fix missing CDE check for scountinhibit target/riscv/pmp: Fix integer overflow in TOR and NA4 address computation target/riscv: Add mseccfg to VMStateDescription target/riscv: clear mseccfg on reset for all dependent extensions hw/riscv/riscv-iommu: fix FSC SV32 capability check hw/riscv/virt-acpi-build: Fix off-by-one error in RIMT ID mapping Zongmin Zhou (2): target/riscv/kvm: add KVM support for Zicbop extension target/riscv/kvm: Add BFloat16 extensions support chen.zhongyao@zte.com.cn (1): target/riscv: Fix tail handling for vmv.s.x and vfmv.s.f MAINTAINERS | 2 + docs/about/deprecated.rst | 21 +- docs/about/removed-features.rst | 14 ++ include/hw/misc/mchp_pfsoc_ioscb.h | 2 + target/riscv/cpu.h | 13 +- target/riscv/helper.h | 4 + hw/char/sifive_uart.c | 1 + hw/intc/riscv_aplic.c | 116 ++++++--- hw/intc/riscv_imsic.c | 19 ++ hw/misc/mchp_pfsoc_ioscb.c | 47 +++- hw/misc/mchp_pfsoc_sysreg.c | 13 + hw/riscv/riscv-iommu-hpm.c | 3 +- hw/riscv/riscv-iommu.c | 96 ++++++-- hw/riscv/shakti_c.c | 1 + hw/riscv/spike.c | 1 - hw/riscv/virt-acpi-build.c | 3 +- hw/riscv/virt.c | 4 +- target/riscv/cpu.c | 327 +++++++++---------------- target/riscv/csr.c | 36 ++- target/riscv/kvm/kvm-cpu.c | 62 +++-- target/riscv/machine.c | 20 ++ target/riscv/pmp.c | 4 +- target/riscv/riscv-qmp-cmds.c | 30 +-- target/riscv/tcg/tcg-cpu.c | 192 +++++++-------- target/riscv/vector_helper.c | 18 ++ target/riscv/insn_trans/trans_rvv.c.inc | 45 ++-- hw/intc/trace-events | 4 + pc-bios/opensbi-riscv32-generic-fw_dynamic.bin | Bin 268752 -> 270384 bytes pc-bios/opensbi-riscv64-generic-fw_dynamic.bin | Bin 273048 -> 275928 bytes roms/opensbi | 2 +- 30 files changed, 613 insertions(+), 487 deletions(-) From: Alistair Francis <alistair.francis@wdc.com> In QEMU 10.0 we deprecated the default spike machine, let's finally remove spike as the default and require users to specify the machine. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Chao Liu <chao.liu.zevorn@gmail.com> Message-ID: <20260430052218.771358-2-alistair.francis@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- docs/about/deprecated.rst | 18 ------------------ docs/about/removed-features.rst | 14 ++++++++++++++ hw/riscv/spike.c | 1 - 3 files changed, 14 insertions(+), 19 deletions(-) diff --git a/docs/about/deprecated.rst b/docs/about/deprecated.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/about/deprecated.rst +++ b/docs/about/deprecated.rst @@ -XXX,XX +XXX,XX @@ better reflects the way this property affects all random data within the device tree blob, not just the ``kaslr-seed`` node. -RISC-V default machine option (since 10.0) -'''''''''''''''''''''''''''''''''''''''''' - -RISC-V defines ``spike`` as the default machine if no machine option is -given in the command line. This happens because ``spike`` is the first -RISC-V machine implemented in QEMU and setting it as default was -convenient at that time. Now we have 7 riscv64 and 6 riscv32 machines -and having ``spike`` as a default is no longer justified. This default -will also promote situations where users think they're running ``virt`` -(the most used RISC-V machine type in 10.0) when in fact they're -running ``spike``. - -Removing the default machine option forces users to always set the machine -they want to use and avoids confusion. Existing users of the ``spike`` -machine must ensure that they're setting the ``spike`` machine in the -command line (``-M spike``). - - Backend options --------------- diff --git a/docs/about/removed-features.rst b/docs/about/removed-features.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/about/removed-features.rst +++ b/docs/about/removed-features.rst @@ -XXX,XX +XXX,XX @@ firmware is available to boot it. It can be replaced by the ``ast2700fc``, another multi-SoC machine based on the newer AST2700 SoCs which are excepted to receive better support in the future. +RISC-V default machine (removed in 11.1) +'''''''''''''''''''''''''''''''''''''''' + +RISC-V used to define ``spike`` as the default machine if no machine option +was given via the command line. This happend because ``spike`` was the first +RISC-V machine implemented in QEMU and setting it as default was +convenient at that time. Now we have 7 riscv64 and 6 riscv32 machines +and having ``spike`` as a default is no longer justified. + +The default machine option has been removed, forcing users to always set the +machine they want to use to avoid confusion. Existing users of the ``spike`` +machine must ensure that they're setting the ``spike`` machine in the +command line (``-M spike``). + linux-user mode CPUs -------------------- diff --git a/hw/riscv/spike.c b/hw/riscv/spike.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/spike.c +++ b/hw/riscv/spike.c @@ -XXX,XX +XXX,XX @@ static void spike_machine_class_init(ObjectClass *oc, const void *data) mc->desc = "RISC-V Spike board"; mc->init = spike_board_init; mc->max_cpus = SPIKE_CPUS_MAX; - mc->is_default = true; mc->default_cpu_type = TYPE_RISCV_CPU_BASE; mc->possible_cpu_arch_ids = riscv_numa_possible_cpu_arch_ids; mc->cpu_index_to_instance_props = riscv_numa_cpu_index_to_props; -- 2.53.0 From: Alistair Francis <alistair.francis@wdc.com> The RISC-V shakti_c machine hasn't had meaningful contributions since 2021 and is currently unmaintained. The machine is scheduled to be removed as it appears to have no users. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Chao Liu <chao.liu.zevorn@gmail.com> Message-ID: <20260430052218.771358-3-alistair.francis@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- docs/about/deprecated.rst | 7 +++++++ hw/riscv/shakti_c.c | 1 + 2 files changed, 8 insertions(+) diff --git a/docs/about/deprecated.rst b/docs/about/deprecated.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/about/deprecated.rst +++ b/docs/about/deprecated.rst @@ -XXX,XX +XXX,XX @@ deprecated; use the new name ``dtb-randomness`` instead. The new name better reflects the way this property affects all random data within the device tree blob, not just the ``kaslr-seed`` node. +RISC-V Shakti machine (since 11.1) +'''''''''''''''''''''''''''''''''' + +The RISC-V ``shakti_c`` machine hasn't had meaningful contributions since 2021 +and is currently unmaintained. The machine is scheduled to be removed as it +appears to have no users. + Backend options --------------- diff --git a/hw/riscv/shakti_c.c b/hw/riscv/shakti_c.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/shakti_c.c +++ b/hw/riscv/shakti_c.c @@ -XXX,XX +XXX,XX @@ static void shakti_c_machine_class_init(ObjectClass *klass, const void *data) mc->init = shakti_c_machine_state_init; mc->default_cpu_type = TYPE_RISCV_CPU_SHAKTI_C; mc->valid_cpu_types = valid_cpu_types; + mc->deprecation_reason = "Currently unmaintained with no known users"; mc->default_ram_id = "riscv.shakti.c.ram"; } -- 2.53.0 From: Frank Chang <frank.chang@sifive.com> MISA.C is set if the following extensions are selected: * Zca and not F. * Zca, Zcf and F (but not D) is specified (RV32 only). * Zca, Zcf and Zcd if D is specified (RV32 only). * Zca, Zcd if D is specified (RV64 only). Therefore, MISA.C must be set according to the Zc* extension rules. Warn the user if RVC is explicitly disabled but MISA.C is required by the rules above. Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Max Chou <max.chou@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260424050509.3935180-2-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 39 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_enable_implied_rules(RISCVCPU *cpu) } } +/* + * MISA.C is set if the following extensions are selected: + * - Zca and not F. + * - Zca, Zcf and F (but not D) is specified on RV32. + * - Zca, Zcf and Zcd if D is specified on RV32. + * - Zca, Zcd if D is specified on RV64. + */ +static void riscv_cpu_update_misa_c(RISCVCPU *cpu) +{ + CPURISCVState *env = &cpu->env; + bool set_misa_c = false; + + if (riscv_has_ext(env, RVC)) { + return; + } + + if (cpu->cfg.ext_zca && !riscv_has_ext(env, RVF)) { + set_misa_c = true; + } else if (riscv_cpu_mxl(env) == MXL_RV32 && + cpu->cfg.ext_zca && cpu->cfg.ext_zcf && + (riscv_has_ext(env, RVD) ? cpu->cfg.ext_zcd : + riscv_has_ext(env, RVF))) { + set_misa_c = true; + } else if (riscv_cpu_mxl(env) == MXL_RV64 && + cpu->cfg.ext_zca && cpu->cfg.ext_zcd) { + set_misa_c = true; + } + + if (set_misa_c) { + if (cpu_misa_ext_is_user_set(RVC)) { + warn_report("RVC mandated by Zca/Zcf/Zcd extensions"); + return; + } + + riscv_cpu_set_misa_ext(env, env->misa_ext | RVC); + } +} + void riscv_tcg_cpu_finalize_features(RISCVCPU *cpu, Error **errp) { CPURISCVState *env = &cpu->env; @@ -XXX,XX +XXX,XX @@ void riscv_tcg_cpu_finalize_features(RISCVCPU *cpu, Error **errp) riscv_cpu_init_implied_exts_rules(); riscv_cpu_enable_implied_rules(cpu); + riscv_cpu_update_misa_c(cpu); riscv_cpu_validate_misa_priv(env, &local_err); if (local_err != NULL) { -- 2.53.0 From: Frank Chang <frank.chang@sifive.com> MISA.X is set if there are any non-standard extensions. We should set MISA.X when any of the vendor extensions is enabled. Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Max Chou <max.chou@sifive.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260424050509.3935180-3-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 1 + target/riscv/tcg/tcg-cpu.c | 15 +++++++++++++++ 2 files changed, 16 insertions(+) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState CPURISCVState; #define RVH RV('H') #define RVG RV('G') #define RVB RV('B') +#define RVX RV('X') extern const uint32_t misa_bits[]; const char *riscv_get_misa_ext_name(uint32_t bit); diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_update_misa_c(RISCVCPU *cpu) } } +/* MISA.X is set when any of the non-standard extensions is enabled. */ +static void riscv_cpu_update_misa_x(RISCVCPU *cpu) +{ + CPURISCVState *env = &cpu->env; + const RISCVCPUMultiExtConfig *arr = riscv_cpu_vendor_exts; + + for (int i = 0; arr[i].name != NULL; i++) { + if (isa_ext_is_enabled(cpu, arr[i].offset)) { + riscv_cpu_set_misa_ext(env, env->misa_ext | RVX); + break; + } + } +} + void riscv_tcg_cpu_finalize_features(RISCVCPU *cpu, Error **errp) { CPURISCVState *env = &cpu->env; @@ -XXX,XX +XXX,XX @@ void riscv_tcg_cpu_finalize_features(RISCVCPU *cpu, Error **errp) riscv_cpu_init_implied_exts_rules(); riscv_cpu_enable_implied_rules(cpu); riscv_cpu_update_misa_c(cpu); + riscv_cpu_update_misa_x(cpu); riscv_cpu_validate_misa_priv(env, &local_err); if (local_err != NULL) { -- 2.53.0 From: Alistair Francis <alistair.francis@wdc.com> Mark the OpenSBI Firmware as maintained by me (Alistair Francis) and add Daniel Henrique Barboza as a reviewer. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20260506234243.1873782-1-alistair.francis@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- MAINTAINERS | 2 ++ 1 file changed, 2 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ S: Supported F: hw/i386/amd_iommu* OpenSBI Firmware +M: Alistair Francis <Alistair.Francis@wdc.com> +R: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> L: qemu-riscv@nongnu.org S: Supported F: pc-bios/opensbi-* -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Update OpenSBI and the pre-built opensbi32 and opensbi64 images to version 1.8.1. We're going for the intermediate/bug fix release 1.8.1 directly due to a PMP related fix that was impacting QEMU profile CPUs. Changelog for v1.8.1: * Typo fix in comments of sbi_hartindex_to_hartid() * Fix hart protection abstraction for platforms without PMP Changelog for v1.8 includes, among other things: - IPI device ratings - SiFive CLINT v2 support - SiFive PL2 cache controller driver - SiFive Extensible Cache (EC) driver - SiFive TMC0 based HSM driver - SiFive SMC0 based system suspend driver - MPXY RPMI mailbox driver for voltage service group - MPXY RPMI mailbox driver for device power service group - MPXY RPMI mailbox driver for performance service group Check out the full release log at [1] for more info. [1] https://github.com/riscv-software-src/opensbi/releases/tag/v1.8 Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260108160825.171794-1-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- .../opensbi-riscv32-generic-fw_dynamic.bin | Bin 268752 -> 270384 bytes .../opensbi-riscv64-generic-fw_dynamic.bin | Bin 273048 -> 275928 bytes roms/opensbi | 2 +- 3 files changed, 1 insertion(+), 1 deletion(-) diff --git a/pc-bios/opensbi-riscv32-generic-fw_dynamic.bin b/pc-bios/opensbi-riscv32-generic-fw_dynamic.bin index XXXXXXX..XXXXXXX 100644 Binary files a/pc-bios/opensbi-riscv32-generic-fw_dynamic.bin and b/pc-bios/opensbi-riscv32-generic-fw_dynamic.bin differ diff --git a/pc-bios/opensbi-riscv64-generic-fw_dynamic.bin b/pc-bios/opensbi-riscv64-generic-fw_dynamic.bin index XXXXXXX..XXXXXXX 100644 Binary files a/pc-bios/opensbi-riscv64-generic-fw_dynamic.bin and b/pc-bios/opensbi-riscv64-generic-fw_dynamic.bin differ diff --git a/roms/opensbi b/roms/opensbi index XXXXXXX..XXXXXXX 160000 --- a/roms/opensbi +++ b/roms/opensbi @@ -1 +1 @@ -Subproject commit a32a91069119e7a5aa31e6bc51d5e00860be3d80 +Subproject commit 74434f255873d74e56cc50aa762d1caf24c099f8 -- 2.53.0 From: Mohamed Ayman <mohamedaymanworkspace@gmail.com> Use a pointer to the hart instead of copying RISCVCPU when passing pmu_avail_ctrs to riscv_pmu_generate_fdt_node(). Signed-off-by: Mohamed Ayman <mohamedaymanworkspace@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260503180252.1122776-1-mohamedaymanworkspace@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_pmu(RISCVVirtState *s) { g_autofree char *pmu_name = g_strdup_printf("/pmu"); MachineState *ms = MACHINE(s); - RISCVCPU hart = s->soc[0].harts[0]; + RISCVCPU *hart = &s->soc[0].harts[0]; qemu_fdt_add_subnode(ms->fdt, pmu_name); qemu_fdt_setprop_string(ms->fdt, pmu_name, "compatible", "riscv,pmu"); - riscv_pmu_generate_fdt_node(ms->fdt, hart.pmu_avail_ctrs, pmu_name); + riscv_pmu_generate_fdt_node(ms->fdt, hart->pmu_avail_ctrs, pmu_name); } static void create_fdt_sockets(RISCVVirtState *s, -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> The Zicfilp extension adds the MLPE field to the mseccfg CSR. According to the RISC-V Privileged Specification, mseccfg exists if any extension that adds a field to it is implemented. Currently, the `have_mseccfg()` predicate function checks for Smepmp, Zkr, and Smmpm, but misses Zicfilp. As a result, if a CPU is configured with `zicfilp=true` but without the other extensions, accessing the mseccfg CSR will incorrectly raise an illegal instruction exception. This patch adds the missing check for `ext_zicfilp` to ensure the CSR is properly accessible when the Zicfilp extension is enabled. This issue was discovered and reported by SpecHunter, an AI-driven architecture specification analysis tool. Link: https://github.com/yizishun/rv-isa-sec/blob/master/output/riscv-isa-manual/pr-2561/qemu.txt Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Reviewed-by: Chao Liu <chao.liu.zevorn@gmail.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260511072705.3015986-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException have_mseccfg(CPURISCVState *env, int csrno) if (riscv_cpu_cfg(env)->ext_smmpm) { return RISCV_EXCP_NONE; } + if (riscv_cpu_cfg(env)->ext_zicfilp) { + return RISCV_EXCP_NONE; + } return RISCV_EXCP_ILLEGAL_INST; } -- 2.53.0 From: Andrew Jones <andrew.jones@oss.qualcomm.com> The Svnapot extension encodes a 64KB leaf PTE by setting PTE_N and storing bits [3:0] of the PPN as a NAPOT size indicator. The IOMMU model wasn't checking PTE_N and therefore was using the raw (NAPOT- encoded) PPN directly in the physical address, yielding an address 32 KB above the correct base. Fix both riscv_iommu_spa_fetch() and pdt_memory_read() by mirroring the Svnapot handling already present in target/riscv/cpu_helper.c: napot_bits = ctz64(ppn) + 1 /* 4 for 64KB */ napot_mask = (1 << napot_bits) - 1 /* 0xF */ phys_base = PPN_PHYS(ppn & ~napot_mask) page_offset = addr & (PPN_PHYS(napot_mask) | (TARGET_PAGE_SIZE - 1)) The spec only defines napot_bits == 4 (64KB); any other value is treated as a reserved encoding. This is a fix, rather than new feature support, because the spec says "IOMMU implementations must support the Svnapot standard extension for NAPOT Translation Contiguity." Fixes: 0c54acb8243d ("hw/riscv: add RISC-V IOMMU base emulation") Cc: qemu-stable@nongnu.org Signed-off-by: Andrew Jones <andrew.jones@oss.qualcomm.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Nutty Liu <nutty.liu@hotmail.com> Reviewed-by: Tomasz Jeznach <tjeznach@rivosinc.com> Message-ID: <20260508205129.377032-1-andrew.jones@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu.c | 44 ++++++++++++++++++++++++++++++++++++++---- 1 file changed, 40 insertions(+), 4 deletions(-) diff --git a/hw/riscv/riscv-iommu.c b/hw/riscv/riscv-iommu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.c +++ b/hw/riscv/riscv-iommu.c @@ -XXX,XX +XXX,XX @@ static bool riscv_iommu_msi_check(RISCVIOMMUState *s, RISCVIOMMUContext *ctx, return true; } +/* Returns the NAPOT page mask, or 0 for reserved encodings. */ +static hwaddr riscv_iommu_napot_page_mask(hwaddr ppn, hwaddr addr, hwaddr *out) +{ + int napot_bits = ctz64(ppn) + 1; + hwaddr napot_mask, page_mask; + + /* The spec only defines 64KB (napot_bits == 4) */ + if (napot_bits != 4) { + return 0; + } + + napot_mask = (1ULL << napot_bits) - 1; + page_mask = PPN_PHYS(napot_mask) | (TARGET_PAGE_SIZE - 1); + + *out = PPN_PHYS(ppn & ~napot_mask) | (addr & page_mask); + + return page_mask; +} + /* * RISCV IOMMU Address Translation Lookup - Page Table Walk * @@ -XXX,XX +XXX,XX @@ static int riscv_iommu_spa_fetch(RISCVIOMMUState *s, RISCVIOMMUContext *ctx, } else { /* Leaf PTE, translation completed. */ sc[pass].step = sc[pass].levels; - base = PPN_PHYS(ppn) | (addr & ((1ULL << va_skip) - 1)); - /* Update address mask based on smallest translation granularity */ - iotlb->addr_mask &= (1ULL << va_skip) - 1; + + if (pte & PTE_N) { + hwaddr mask = riscv_iommu_napot_page_mask(ppn, addr, &base); + + if (!mask) { + break; + } + iotlb->addr_mask &= mask; + } else { + base = PPN_PHYS(ppn) | (addr & ((1ULL << va_skip) - 1)); + /* Update address mask based on smallest translation granularity */ + iotlb->addr_mask &= (1ULL << va_skip) - 1; + } + /* Continue with S-Stage translation? */ if (pass && sc[0].step != sc[0].levels) { pass = S_STAGE; @@ -XXX,XX +XXX,XX @@ static MemTxResult pdt_memory_read(RISCVIOMMUState *s, return MEMTX_ACCESS_ERROR; /* Misaligned PPN */ } else { /* Leaf PTE, translation completed. */ - base = PPN_PHYS(ppn) | (addr & ((1ULL << va_skip) - 1)); + if (pte & PTE_N) { + if (!riscv_iommu_napot_page_mask(ppn, addr, &base)) { + return MEMTX_ACCESS_ERROR; + } + } else { + base = PPN_PHYS(ppn) | (addr & ((1ULL << va_skip) - 1)); + } break; } -- 2.53.0 From: Anton Blanchard <antonb@tenstorrent.com> Widening reductions read vs2 as a vector of SEW elements and vs1[0] as a scalar of 2*SEW. The ISA does not allow the same vector register to be read with different EEWs, so they must not overlap. vs1 is read as a scalar from element 0, so it is treated as a single vector register (independent of LMUL) when checking overlap. Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3208 Signed-off-by: Anton Blanchard <antonb@tenstorrent.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260417080328.31918-1-antonb@tenstorrent.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/insn_trans/trans_rvv.c.inc | 1 + 1 file changed, 1 insertion(+) diff --git a/target/riscv/insn_trans/trans_rvv.c.inc b/target/riscv/insn_trans/trans_rvv.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_rvv.c.inc +++ b/target/riscv/insn_trans/trans_rvv.c.inc @@ -XXX,XX +XXX,XX @@ GEN_OPIVV_TRANS(vredxor_vs, reduction_check) static bool reduction_widen_check(DisasContext *s, arg_rmrr *a) { return reduction_check(s, a) && (s->sew < MO_64) && + !is_overlapped(a->rs1, 1, a->rs2, 1 << MAX(s->lmul, 0)) && ((s->sew + 1) <= (s->cfg_ptr->elen >> 4)); } -- 2.53.0 From: Frank Chang <frank.chang@sifive.com> It's possible that the transmit watermark level (txctrl.txcnt) is updated when the user writes to txctrl register, which may decrease the transmit watermark level to less than the number of entries in the transmit FIFO. In such a case, the interrupt should be raised so we need to call sifive_uart_update_irq() to check and update interrupt when txctrl register is written. Otherwise, the interrupt will have to be delayed until next TX FIFO transmission is processed. Suggested-by: Chao Liu <chao.liu.zevorn@gmail.com> Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260513030503.3665414-1-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/char/sifive_uart.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/char/sifive_uart.c b/hw/char/sifive_uart.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/sifive_uart.c +++ b/hw/char/sifive_uart.c @@ -XXX,XX +XXX,XX @@ sifive_uart_write(void *opaque, hwaddr addr, if (SIFIVE_UART_TXEN(s->txctrl) && !fifo8_is_empty(&s->tx_fifo)) { sifive_uart_trigger_tx_fifo(s); } + sifive_uart_update_irq(s); return; case SIFIVE_UART_RXCTRL: s->rxctrl = val64; -- 2.53.0 From: Abhigyan Kumar <314abh@gmail.com> RISC-V Privileged Specification 3.1.8 (Machine Trap Delegation Registers (medeleg and mideleg)) mentions: "For exceptions that cannot occur in less privileged modes, the corresponding medeleg bits should be read-only zero. In particular, medeleg[11] is read-only zero." QEMU incorrectly included RISCV_EXCP_M_ECALL in DELEGABLE_EXCPS. It allowed the 11th bit to be written and read as set. Fixed by removing it from the DELEGABLE_EXCPS mask, adhering to the specification. Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3438 Signed-off-by: Abhigyan Kumar <314abh@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260427060849.749179-2-314abh@gmail.com> [ Changes by AF: - Remove comment ] Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 1 - 1 file changed, 1 deletion(-) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static const uint64_t all_ints = M_MODE_INTERRUPTS | S_MODE_INTERRUPTS | (1ULL << (RISCV_EXCP_U_ECALL)) | \ (1ULL << (RISCV_EXCP_S_ECALL)) | \ (1ULL << (RISCV_EXCP_VS_ECALL)) | \ - (1ULL << (RISCV_EXCP_M_ECALL)) | \ (1ULL << (RISCV_EXCP_INST_PAGE_FAULT)) | \ (1ULL << (RISCV_EXCP_LOAD_PAGE_FAULT)) | \ (1ULL << (RISCV_EXCP_STORE_PAGE_FAULT)) | \ -- 2.53.0 From: "chen.zhongyao@zte.com.cn" <chen.zhongyao@zte.com.cn> The risc-v vector spec defines vmv.s.x and vfmv.s.f as writing element 0 of the destination register while the remaining destination elements follow the current tail policy. When QEMU runs with rvv_ta_all_1s enabled, those elements must therefore become all 1s. QEMU handled both instructions as translation-time special cases that directly wrote vd[0] and skipped the usual tail processing. As a result, vmv.s.x and vfmv.s.f left the remaining destination elements unchanged instead of applying the configured tail policy. Fix this by routing both instructions through a helper that writes vd[0] and then treats the rest of the destination register as tail, reusing the existing agnostic-element fill logic. Signed-off-by: Zhongyao Chen <chen.zhongyao@zte.com.cn> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <202605061005.646A537u037157@mse-fl1.zte.com.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/helper.h | 4 +++ target/riscv/vector_helper.c | 18 ++++++++++ target/riscv/insn_trans/trans_rvv.c.inc | 44 ++++++++----------------- 3 files changed, 36 insertions(+), 30 deletions(-) diff --git a/target/riscv/helper.h b/target/riscv/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/helper.h +++ b/target/riscv/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_4(vmv_v_x_b, void, ptr, i64, env, i32) DEF_HELPER_4(vmv_v_x_h, void, ptr, i64, env, i32) DEF_HELPER_4(vmv_v_x_w, void, ptr, i64, env, i32) DEF_HELPER_4(vmv_v_x_d, void, ptr, i64, env, i32) +DEF_HELPER_4(vset_velem0_b, void, ptr, i64, env, i32) +DEF_HELPER_4(vset_velem0_h, void, ptr, i64, env, i32) +DEF_HELPER_4(vset_velem0_w, void, ptr, i64, env, i32) +DEF_HELPER_4(vset_velem0_d, void, ptr, i64, env, i32) DEF_HELPER_6(vsaddu_vv_b, void, ptr, ptr, ptr, ptr, env, i32) DEF_HELPER_6(vsaddu_vv_h, void, ptr, ptr, ptr, ptr, env, i32) diff --git a/target/riscv/vector_helper.c b/target/riscv/vector_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/vector_helper.c +++ b/target/riscv/vector_helper.c @@ -XXX,XX +XXX,XX @@ GEN_VEXT_VMV_VX(vmv_v_x_h, int16_t, H2) GEN_VEXT_VMV_VX(vmv_v_x_w, int32_t, H4) GEN_VEXT_VMV_VX(vmv_v_x_d, int64_t, H8) +#define GEN_VEXT_SET_VELEM0(NAME, ETYPE, H) \ +void HELPER(NAME)(void *vd, uint64_t s1, CPURISCVState *env, \ + uint32_t desc) \ +{ \ + uint32_t esz = sizeof(ETYPE); \ + uint32_t vlenb = riscv_cpu_cfg(env)->vlenb; \ + uint32_t vta = vext_vta(desc); \ + \ + *((ETYPE *)vd + H(0)) = (ETYPE)s1; \ + /* Treat every element past vd[0] as tail for scalar-to-vector moves. */ \ + vext_set_elems_1s(vd, vta, esz, vlenb); \ +} + +GEN_VEXT_SET_VELEM0(vset_velem0_b, int8_t, H1) +GEN_VEXT_SET_VELEM0(vset_velem0_h, int16_t, H2) +GEN_VEXT_SET_VELEM0(vset_velem0_w, int32_t, H4) +GEN_VEXT_SET_VELEM0(vset_velem0_d, int64_t, H8) + #define GEN_VEXT_VMERGE_VV(NAME, ETYPE, H) \ void HELPER(NAME)(void *vd, void *v0, void *vs1, void *vs2, \ CPURISCVState *env, uint32_t desc) \ diff --git a/target/riscv/insn_trans/trans_rvv.c.inc b/target/riscv/insn_trans/trans_rvv.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_rvv.c.inc +++ b/target/riscv/insn_trans/trans_rvv.c.inc @@ -XXX,XX +XXX,XX @@ static void vec_element_loadi(DisasContext *s, TCGv_i64 dest, load_element(dest, tcg_env, endian_ofs(s, vreg, idx), s->sew, sign); } -/* Integer Scalar Move Instruction */ +typedef void gen_helper_vset_velem0(TCGv_ptr, TCGv_i64, TCGv_env, TCGv_i32); -static void store_element(TCGv_i64 val, TCGv_ptr base, - int ofs, int sew) +static void vec_element_storei_tail(DisasContext *s, int vreg, TCGv_i64 val) { - switch (sew) { - case MO_8: - tcg_gen_st8_i64(val, base, ofs); - break; - case MO_16: - tcg_gen_st16_i64(val, base, ofs); - break; - case MO_32: - tcg_gen_st32_i64(val, base, ofs); - break; - case MO_64: - tcg_gen_st_i64(val, base, ofs); - break; - default: - g_assert_not_reached(); - } -} + static gen_helper_vset_velem0 * const fns[4] = { + gen_helper_vset_velem0_b, gen_helper_vset_velem0_h, + gen_helper_vset_velem0_w, gen_helper_vset_velem0_d, + }; + TCGv_ptr dest = tcg_temp_new_ptr(); + uint32_t data = FIELD_DP32(0, VDATA, VTA, s->vta); + TCGv_i32 desc = tcg_constant_i32(simd_desc(s->cfg_ptr->vlenb, + s->cfg_ptr->vlenb, data)); -/* - * Store vreg[idx] = val. - * The index must be in range of VLMAX. - */ -static void vec_element_storei(DisasContext *s, int vreg, - int idx, TCGv_i64 val) -{ - store_element(val, tcg_env, endian_ofs(s, vreg, idx), s->sew); + tcg_gen_addi_ptr(dest, tcg_env, vreg_ofs(s, vreg)); + fns[s->sew](dest, val, tcg_env, desc); } /* vmv.x.s rd, vs2 # x[rd] = vs2[0] */ @@ -XXX,XX +XXX,XX @@ static bool trans_vmv_s_x(DisasContext *s, arg_vmv_s_x *a) */ s1 = get_gpr(s, a->rs1, EXT_NONE); tcg_gen_ext_tl_i64(t1, s1); - vec_element_storei(s, a->rd, 0, t1); + vec_element_storei_tail(s, a->rd, t1); gen_set_label(over); tcg_gen_movi_tl(cpu_vstart, 0); finalize_rvv_inst(s); @@ -XXX,XX +XXX,XX @@ static bool trans_vfmv_s_f(DisasContext *s, arg_vfmv_s_f *a) t1 = tcg_temp_new_i64(); do_nanbox(s, t1, cpu_fpr[a->rs1]); - vec_element_storei(s, a->rd, 0, t1); + vec_element_storei_tail(s, a->rd, t1); gen_set_label(over); tcg_gen_movi_tl(cpu_vstart, 0); -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> The RISC-V unpriv specification (zvk.adoc) states that "Zvknhb implies Zvknha". This means that enabling Zvknhb should automatically enable Zvknha. Add Zvknha to ZVKNHB_IMPLIED to ensure the dependency is correctly enforced. This issue was discovered and reported by SpecHunter, an AI-driven architecture specification analysis tool. Link:https://github.com/yizishun/rv-isa-sec/blob/master/output/riscv-isa-manual/pr-2635/qemu.txt Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260511051736.2916225-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static RISCVCPUImpliedExtsRule ZVKNG_IMPLIED = { static RISCVCPUImpliedExtsRule ZVKNHB_IMPLIED = { .ext = CPU_CFG_OFFSET(ext_zvknhb), .implied_multi_exts = { - CPU_CFG_OFFSET(ext_zve64x), + CPU_CFG_OFFSET(ext_zve64x), CPU_CFG_OFFSET(ext_zvknha), RISCV_IMPLIED_EXTS_RULE_END }, -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> Currently, the MENVCFG_CDE (Counter Delegation Enable) bit is unconditionally included in the base write mask for CSR_MENVCFG. This make the subsequent conditional check `(cfg->ext_smcdeleg ? MENVCFG_CDE : 0)` completely ineffective, as a bitwise OR cannot clear a bit that is already set. Fix this by removing MENVCFG_CDE from the initial base mask. The bit will now only be writable when explicitly granted by the `ext_smcdeleg` configuration. This issue was discovered and reported by SpecHunter, an AI-driven architecture specification analysis tool. Link: https://github.com/yizishun/rv-isa-sec/blob/master/output/riscv-isa-manual/pr-2601/qemu.txt Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260511040534.2862443-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException write_menvcfg(CPURISCVState *env, int csrno, { const RISCVCPUConfig *cfg = riscv_cpu_cfg(env); uint64_t mask = MENVCFG_FIOM | MENVCFG_CBIE | MENVCFG_CBCFE | - MENVCFG_CBZE | MENVCFG_CDE; + MENVCFG_CBZE; bool stce_changed = false; if (riscv_cpu_mxl(env) == MXL_RV64) { -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> According to the RISC-V smcdeleg specification: "When menvcfg.CDE=0, attempts to access scountinhibit raise an illegal-instruction exception." The current implementation of scountinhibit_pred() only checks the hardware extensions (ext_ssccfg, ext_smcdeleg) and virtualization status, but completely misses the runtime environment configuration check (menvcfg.CDE). This allows S-mode to access scountinhibit even when the M-mode has explicitly disabled counter delegation. This issue was discovered by the SpecHunter tool (https://github.com/yizishun/rv-isa-sec/blob/master/output/riscv-isa-manual/pr-2571/qemu.txt). Fixes: 6247dc2ef70b ("target/riscv: Add counter delegation/configuration support") Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260508174917.371667-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException scountinhibit_pred(CPURISCVState *env, int csrno) return RISCV_EXCP_ILLEGAL_INST; } + if (!get_field(env->menvcfg, MENVCFG_CDE)) { + return RISCV_EXCP_ILLEGAL_INST; + } + if (env->virt_enabled) { return RISCV_EXCP_VIRT_INSTRUCTION_FAULT; } -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> According to the RISC-V Privileged Manual: "The Sv32 page-based virtual-memory scheme described in sv32 supports 34-bit physical addresses for RV32, so the PMP scheme must support addresses wider than XLEN for RV32." However, the current QEMU implementation uses `target_ulong` (which resolves to `uint32_t` on RV32) for PMP address variables. When shifting these addresses left (e.g., `this_addr << 2`), an integer overflow occurs, truncating the high bits of the 34-bit physical address. Fix this issue by changing the types of PMP address variables (`this_addr` and `prev_addr`) to `hwaddr`. This issue was discovered and reported by SpecHunter, an AI-driven architecture specification analysis tool. Link: https://github.com/yizishun/rv-isa-sec/blob/master/output/riscv-isa-manual/pr-2472/qemu.txt Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260511102627.3120140-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/pmp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/riscv/pmp.c b/target/riscv/pmp.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/pmp.c +++ b/target/riscv/pmp.c @@ -XXX,XX +XXX,XX @@ static void pmp_decode_napot(hwaddr a, hwaddr *sa, hwaddr *ea) void pmp_update_rule_addr(CPURISCVState *env, uint32_t pmp_index) { uint8_t this_cfg = env->pmp_state.pmp[pmp_index].cfg_reg; - target_ulong this_addr = env->pmp_state.pmp[pmp_index].addr_reg; - target_ulong prev_addr = 0u; + hwaddr this_addr = env->pmp_state.pmp[pmp_index].addr_reg; + hwaddr prev_addr = 0u; hwaddr sa = 0u; hwaddr ea = 0u; int g = pmp_get_granularity_g(env); -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> Currently, the Machine Security Configuration Register (mseccfg) was missing from the live migration state. This omission causes the register to be reset to zero on the destination host after migration. Fixed by adding vmstate_mseccfg subsection This vulnerability was discovered and reported by SpecHunter, an AI-driven architecture specification analysis tool. Link: https://github.com/yizishun/rv-isa-sec/blob/a22e4459cd026ae970791dfbd9cfe5d110fbd46b/output/riscv-isa-manual/pr-1879/qemu.txt#L121 Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260511124828.3210477-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/machine.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/target/riscv/machine.c b/target/riscv/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/machine.c +++ b/target/riscv/machine.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_sstc = { } }; +static bool mseccfg_needed(void *opaque) +{ + RISCVCPU *cpu = opaque; + + return cpu->cfg.ext_smepmp || cpu->cfg.ext_zkr + || cpu->cfg.ext_smmpm || cpu->cfg.ext_zicfilp; +} + +static const VMStateDescription vmstate_mseccfg = { + .name = "cpu/mseccfg", + .version_id = 1, + .minimum_version_id = 1, + .needed = mseccfg_needed, + .fields = (const VMStateField[]) { + VMSTATE_UINTTL(env.mseccfg, RISCVCPU), + VMSTATE_END_OF_LIST() + } +}; + const VMStateDescription vmstate_riscv_cpu = { .name = "cpu", .version_id = 11, @@ -XXX,XX +XXX,XX @@ const VMStateDescription vmstate_riscv_cpu = { &vmstate_ssp, &vmstate_ctr, &vmstate_sstc, + &vmstate_mseccfg, NULL } }; -- 2.53.0 From: Alistair Francis <alistair.francis@wdc.com> The RISC-V spec describes bits 0-15 as standard fixed interrupts. The AIA spec on the other hand describes bits 0-12 as standard fixed interrupts. This conflict causes issues for us as we don't dynamically determine if AIA is enabled when setting the *delegable_ints consts. This means currently we incorrectly treat the LCOFIP bit as delegable, even if AIA is disabled, which is incorrect (see the issues mentioned below). The AIA spec indicates that implementations can determine which bits of 13-63 in mvien are writable, so let's just make it bits 15-63 to match the main spec. Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3133 Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3134 Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3135 Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3138 Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3140 Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260513051841.1671987-1-alistair.francis@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException write_stimecmph(CPURISCVState *env, int csrno, #define VSTOPI_NUM_SRCS 5 /* - * All core local interrupts except the fixed ones 0:12. This macro is for + * All core local interrupts except the fixed ones 0:15. This macro is for * virtual interrupts logic so please don't change this to avoid messing up * the whole support, For reference see AIA spec: `5.3 Interrupt filtering and * virtual interrupts for supervisor level` and `6.3.2 Virtual interrupts for * VS level`. */ -#define LOCAL_INTERRUPTS (~0x1FFFULL) +#define LOCAL_INTERRUPTS (~0xFFFFULL) static const uint64_t delegable_ints = S_MODE_INTERRUPTS | VS_MODE_INTERRUPTS | MIP_LCOFIP; -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> Currently, the `mseccfg` CSR is only cleared to 0 during reset if the `ext_smepmp` is enabled. However, this register is now shared by several other extensions such as `zkr`, `smmpm`, and `zicfilp`. Fix by clearing `mseccfg` if any dependent extension is present, and adjusting the relevant comments. This vulnerability was discovered and reported by SpecHunter, an AI-driven architecture specification analysis tool. Link: https://github.com/yizishun/rv-isa-sec/blob/master/output/riscv-svvptc/pr-134/qemu.txt Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260512052240.330815-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_reset_hold(Object *obj, ResetType type) /* * Clear mseccfg and unlock all the PMP entries upon reset. - * This is allowed as per the priv and smepmp specifications - * and is needed to clear stale entries across reboots. + * This is required as per the priv, smepmp, and other security + * extension specifications that share this CSR, and is needed + * to clear stale entries across reboots. */ - if (riscv_cpu_cfg(env)->ext_smepmp) { + if (riscv_cpu_cfg(env)->ext_smepmp || + riscv_cpu_cfg(env)->ext_zkr || + riscv_cpu_cfg(env)->ext_smmpm || + riscv_cpu_cfg(env)->ext_zicfilp) { env->mseccfg = 0; } -- 2.53.0 From: Zongmin Zhou <zhouzongmin@kylinos.cn> When the Zicbop extension is available expose it to the KVM guest. Also read and validate cbop_blocksize from the host via KVM interface. Signed-off-by: Zongmin Zhou <zhouzongmin@kylinos.cn> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <9e388aa9984ea9d3d0c85e1630c9195023938952.1778653159.git.zhouzongmin@kylinos.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/kvm/kvm-cpu.c | 34 ++++++++++++++++++++++++++++++++-- 1 file changed, 32 insertions(+), 2 deletions(-) diff --git a/target/riscv/kvm/kvm-cpu.c b/target/riscv/kvm/kvm-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/kvm/kvm-cpu.c +++ b/target/riscv/kvm/kvm-cpu.c @@ -XXX,XX +XXX,XX @@ static void kvm_cpu_csr_set_u64(RISCVCPU *cpu, KVMCPUConfig *csr_cfg, static KVMCPUConfig kvm_multi_ext_cfgs[] = { KVM_EXT_CFG("zicbom", ext_zicbom, KVM_RISCV_ISA_EXT_ZICBOM), + KVM_EXT_CFG("zicbop", ext_zicbop, KVM_RISCV_ISA_EXT_ZICBOP), KVM_EXT_CFG("zicboz", ext_zicboz, KVM_RISCV_ISA_EXT_ZICBOZ), KVM_EXT_CFG("ziccrse", ext_ziccrse, KVM_RISCV_ISA_EXT_ZICCRSE), KVM_EXT_CFG("zicntr", ext_zicntr, KVM_RISCV_ISA_EXT_ZICNTR), @@ -XXX,XX +XXX,XX @@ static KVMCPUConfig kvm_cboz_blocksize = { .kvm_reg_id = KVM_REG_RISCV_CONFIG_REG(zicboz_block_size) }; +static KVMCPUConfig kvm_cbop_blocksize = { + .name = "cbop_blocksize", + .offset = CPU_CFG_OFFSET(cbop_blocksize), + .kvm_reg_id = KVM_REG_RISCV_CONFIG_REG(zicbop_block_size) +}; + static KVMCPUConfig kvm_v_vlenb = { .name = "vlenb", .offset = CPU_CFG_OFFSET(vlenb), @@ -XXX,XX +XXX,XX @@ static void kvm_riscv_init_cfg(RISCVCPU *cpu, KVMScratchCPU *kvmcpu) kvm_riscv_read_cbomz_blksize(cpu, kvmcpu, &kvm_cbom_blocksize); } + if (cpu->cfg.ext_zicbop) { + kvm_riscv_read_cbomz_blksize(cpu, kvmcpu, &kvm_cbop_blocksize); + } + if (cpu->cfg.ext_zicboz) { kvm_riscv_read_cbomz_blksize(cpu, kvmcpu, &kvm_cboz_blocksize); } @@ -XXX,XX +XXX,XX @@ void riscv_kvm_cpu_finalize_features(RISCVCPU *cpu, Error **errp) int ret; /* short-circuit without spinning the scratch CPU */ - if (!cpu->cfg.ext_zicbom && !cpu->cfg.ext_zicboz && - !riscv_has_ext(env, RVV)) { + if (!cpu->cfg.ext_zicbom && !cpu->cfg.ext_zicbop && + !cpu->cfg.ext_zicboz && !riscv_has_ext(env, RVV)) { return; } @@ -XXX,XX +XXX,XX @@ void riscv_kvm_cpu_finalize_features(RISCVCPU *cpu, Error **errp) } } + if (cpu->cfg.ext_zicbop && + riscv_cpu_option_set(kvm_cbop_blocksize.name)) { + + reg.id = KVM_RISCV_REG_ID_ULONG(KVM_REG_RISCV_CONFIG, + kvm_cbop_blocksize.kvm_reg_id); + reg.addr = (uint64_t)&val; + ret = ioctl(kvmcpu.cpufd, KVM_GET_ONE_REG, &reg); + if (ret != 0) { + error_setg_errno(errp, errno, "Unable to read cbop_blocksize"); + return; + } + + if (cpu->cfg.cbop_blocksize != val) { + error_setg(errp, "Unable to set cbop_blocksize to a different " + "value than the host (%lu)", val); + return; + } + } + /* Users are setting vlen, not vlenb */ if (riscv_has_ext(env, RVV) && riscv_cpu_option_set("vlen")) { if (!kvm_v_vlenb.supported) { -- 2.53.0 From: Zongmin Zhou <zhouzongmin@kylinos.cn> Expose the BFloat16 extensions (Zfbfmin, Zvfbfmin, Zvfbfwma) to KVM guests when available in hardware. Signed-off-by: Zongmin Zhou <zhouzongmin@kylinos.cn> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <1258febb0eeb4ee286eb88f70b077a7f1ece507f.1778653159.git.zhouzongmin@kylinos.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/kvm/kvm-cpu.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/target/riscv/kvm/kvm-cpu.c b/target/riscv/kvm/kvm-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/kvm/kvm-cpu.c +++ b/target/riscv/kvm/kvm-cpu.c @@ -XXX,XX +XXX,XX @@ static KVMCPUConfig kvm_multi_ext_cfgs[] = { KVM_EXT_CFG("zacas", ext_zacas, KVM_RISCV_ISA_EXT_ZACAS), KVM_EXT_CFG("zawrs", ext_zawrs, KVM_RISCV_ISA_EXT_ZAWRS), KVM_EXT_CFG("zfa", ext_zfa, KVM_RISCV_ISA_EXT_ZFA), + KVM_EXT_CFG("zfbfmin", ext_zfbfmin, KVM_RISCV_ISA_EXT_ZFBFMIN), KVM_EXT_CFG("zfh", ext_zfh, KVM_RISCV_ISA_EXT_ZFH), KVM_EXT_CFG("zfhmin", ext_zfhmin, KVM_RISCV_ISA_EXT_ZFHMIN), KVM_EXT_CFG("zba", ext_zba, KVM_RISCV_ISA_EXT_ZBA), @@ -XXX,XX +XXX,XX @@ static KVMCPUConfig kvm_multi_ext_cfgs[] = { KVM_EXT_CFG("zvbc", ext_zvbc, KVM_RISCV_ISA_EXT_ZVBC), KVM_EXT_CFG("zvfh", ext_zvfh, KVM_RISCV_ISA_EXT_ZVFH), KVM_EXT_CFG("zvfhmin", ext_zvfhmin, KVM_RISCV_ISA_EXT_ZVFHMIN), + KVM_EXT_CFG("zvfbfmin", ext_zvfbfmin, KVM_RISCV_ISA_EXT_ZVFBFMIN), + KVM_EXT_CFG("zvfbfwma", ext_zvfbfwma, KVM_RISCV_ISA_EXT_ZVFBFWMA), KVM_EXT_CFG("zvkb", ext_zvkb, KVM_RISCV_ISA_EXT_ZVKB), KVM_EXT_CFG("zvkg", ext_zvkg, KVM_RISCV_ISA_EXT_ZVKG), KVM_EXT_CFG("zvkned", ext_zvkned, KVM_RISCV_ISA_EXT_ZVKNED), -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> Fix a mode-to-capability comparison error in riscv_iommu_validate_device_ctx. The code was comparing fsc_mode (a value) against a capability bitmask, making the SV32 support check ineffective. This issue was discovered and reported by SpecHunter, an AI-driven architecture specification analysis tool. Link: https://github.com/yizishun/rv-isa-sec/blob/master/output/riscv-iommu/pr-694/qemu.txt Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260511080904.3049446-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/riscv/riscv-iommu.c b/hw/riscv/riscv-iommu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.c +++ b/hw/riscv/riscv-iommu.c @@ -XXX,XX +XXX,XX @@ static bool riscv_iommu_validate_device_ctx(RISCVIOMMUState *s, } if (ctx->tc & RISCV_IOMMU_DC_TC_SXL) { - if (fsc_mode == RISCV_IOMMU_CAP_SV32 && + if (fsc_mode == RISCV_IOMMU_DC_FSC_IOSATP_MODE_SV32 && !(s->cap & RISCV_IOMMU_CAP_SV32)) { return false; } -- 2.53.0 From: Chengbo Gao <gaochengbo@bosc.ac.cn> PCI bus numbers may still be unassigned when QEMU initializes a PCI device's bus-master address space. For devices behind bridges, pci_bus_num() can return 0 at that point because the guest has not yet programmed the bridge Secondary Bus Number register. The RISC-V IOMMU currently stores a fixed device_id in RISCVIOMMUSpace when the address space is created. If the guest later enumerates the device on a non-zero bus, DMA translation still uses the stale device_id and may look up the wrong device context in the DDT. Store the stable PCIBus pointer and devfn in RISCVIOMMUSpace instead, and compute the device_id from the current bus number when it is needed. This keeps DMA translation and ATS invalidation in sync with guest PCI bus enumeration. Signed-off-by: Chengbo Gao <gaochengbo@bosc.ac.cn> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260514020637.2819308-1-gaochengbo@bosc.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu.c | 40 +++++++++++++++++++++++++--------------- 1 file changed, 25 insertions(+), 15 deletions(-) diff --git a/hw/riscv/riscv-iommu.c b/hw/riscv/riscv-iommu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.c +++ b/hw/riscv/riscv-iommu.c @@ -XXX,XX +XXX,XX @@ struct RISCVIOMMUSpace { IOMMUMemoryRegion iova_mr; /* IOVA memory region for attached device */ AddressSpace iova_as; /* IOVA address space for attached device */ RISCVIOMMUState *iommu; /* Managing IOMMU device state */ - uint32_t devid; /* Requester identifier, AKA device_id */ + PCIBus *bus; /* PCI bus of the requester */ + uint8_t devfn; /* Requester identifier, AKA device_id */ bool notifier; /* IOMMU unmap notifier enabled */ QLIST_ENTRY(RISCVIOMMUSpace) list; }; @@ -XXX,XX +XXX,XX @@ struct RISCVIOMMUEntry { /* IOMMU index for transactions without process_id specified. */ #define RISCV_IOMMU_NOPROCID 0 +static uint32_t riscv_iommu_space_devid(RISCVIOMMUSpace *as) +{ + uint32_t devid = PCI_BUILD_BDF(pci_bus_num(as->bus), as->devfn); + + /* FIXME: PCIe bus remapping for attached endpoints. */ + devid |= as->iommu->bus << 8; + return devid; +} + static uint8_t riscv_iommu_get_icvec_vector(uint32_t icvec, uint32_t vec_type) { switch (vec_type) { @@ -XXX,XX +XXX,XX @@ static void riscv_iommu_ctx_put(RISCVIOMMUState *s, void *ref) } /* Find or allocate address space for a given device */ -static AddressSpace *riscv_iommu_space(RISCVIOMMUState *s, uint32_t devid) +static AddressSpace *riscv_iommu_space(RISCVIOMMUState *s, PCIBus *bus, + int devfn) { RISCVIOMMUSpace *as; - /* FIXME: PCIe bus remapping for attached endpoints. */ - devid |= s->bus << 8; - QLIST_FOREACH(as, &s->spaces, list) { - if (as->devid == devid) { + if (as->bus == bus && as->devfn == devfn) { break; } } @@ -XXX,XX +XXX,XX @@ static AddressSpace *riscv_iommu_space(RISCVIOMMUState *s, uint32_t devid) as = g_new0(RISCVIOMMUSpace, 1); as->iommu = s; - as->devid = devid; + as->bus = bus; + as->devfn = devfn; snprintf(name, sizeof(name), "riscv-iommu-%04x:%02x.%d-iova", - PCI_BUS_NUM(as->devid), PCI_SLOT(as->devid), PCI_FUNC(as->devid)); + pci_bus_num(bus), PCI_SLOT(devfn), PCI_FUNC(devfn)); /* IOVA address space, untranslated addresses */ memory_region_init_iommu(&as->iova_mr, sizeof(as->iova_mr), @@ -XXX,XX +XXX,XX @@ static AddressSpace *riscv_iommu_space(RISCVIOMMUState *s, uint32_t devid) QLIST_INSERT_HEAD(&s->spaces, as, list); - trace_riscv_iommu_new(s->parent_obj.id, PCI_BUS_NUM(as->devid), - PCI_SLOT(as->devid), PCI_FUNC(as->devid)); + trace_riscv_iommu_new(s->parent_obj.id, pci_bus_num(bus), + PCI_SLOT(devfn), PCI_FUNC(devfn)); } return &as->iova_as; } @@ -XXX,XX +XXX,XX @@ static void riscv_iommu_ats(RISCVIOMMUState *s, pid = get_field(cmd->dword0, RISCV_IOMMU_CMD_ATS_PID); QLIST_FOREACH(as, &s->spaces, list) { - if (as->devid == devid) { + if (riscv_iommu_space_devid(as) == devid) { break; } } @@ -XXX,XX +XXX,XX @@ static IOMMUTLBEntry riscv_iommu_memory_region_translate( .addr_mask = ~0ULL, .perm = flag, }; + uint32_t devid = riscv_iommu_space_devid(as); - ctx = riscv_iommu_ctx(as->iommu, as->devid, iommu_idx, &ref); + ctx = riscv_iommu_ctx(as->iommu, devid, iommu_idx, &ref); if (ctx == NULL) { /* Translation disabled or invalid. */ iotlb.addr_mask = 0; @@ -XXX,XX +XXX,XX @@ static IOMMUTLBEntry riscv_iommu_memory_region_translate( } /* Trace all dma translations with original access flags. */ - trace_riscv_iommu_dma(as->iommu->parent_obj.id, PCI_BUS_NUM(as->devid), - PCI_SLOT(as->devid), PCI_FUNC(as->devid), iommu_idx, + trace_riscv_iommu_dma(as->iommu->parent_obj.id, PCI_BUS_NUM(devid), + PCI_SLOT(devid), PCI_FUNC(devid), iommu_idx, IOMMU_FLAG_STR[flag & IOMMU_RW], iotlb.iova, iotlb.translated_addr); @@ -XXX,XX +XXX,XX @@ static AddressSpace *riscv_iommu_find_as(PCIBus *bus, void *opaque, int devfn) /* Find first matching IOMMU */ while (s != NULL && as == NULL) { - as = riscv_iommu_space(s, PCI_BUILD_BDF(pci_bus_num(bus), devfn)); + as = riscv_iommu_space(s, bus, devfn); s = s->iommus.le_next; } -- 2.53.0 From: Guenter Roeck <linux@roeck-us.net> Minimal clock register configuration required to boot Linux without backtraces in the clock code. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260514-reference-overhand-749149e36a88@spud> [ Changes by AF: - Fixup checkpatch errors ] Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/misc/mchp_pfsoc_ioscb.h | 2 ++ hw/misc/mchp_pfsoc_ioscb.c | 47 +++++++++++++++++++++++++++++- hw/misc/mchp_pfsoc_sysreg.c | 13 +++++++++ 3 files changed, 61 insertions(+), 1 deletion(-) diff --git a/include/hw/misc/mchp_pfsoc_ioscb.h b/include/hw/misc/mchp_pfsoc_ioscb.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/mchp_pfsoc_ioscb.h +++ b/include/hw/misc/mchp_pfsoc_ioscb.h @@ -XXX,XX +XXX,XX @@ typedef struct MchpPfSoCIoscbState { MemoryRegion mailbox; MemoryRegion cfg; MemoryRegion ccc; + MemoryRegion pll_nw_0; + MemoryRegion pll_nw_1; MemoryRegion pll_mss; MemoryRegion cfm_mss; MemoryRegion pll_ddr; diff --git a/hw/misc/mchp_pfsoc_ioscb.c b/hw/misc/mchp_pfsoc_ioscb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/mchp_pfsoc_ioscb.c +++ b/hw/misc/mchp_pfsoc_ioscb.c @@ -XXX,XX +XXX,XX @@ #define IOSCB_MAILBOX_BASE 0x07020800 #define IOSCB_CFG_BASE 0x07080000 #define IOSCB_CCC_BASE 0x08000000 +#define IOSCB_PLL_NW0_BASE 0x08100000 +#define IOSCB_PLL_NW1_BASE 0x08200000 #define IOSCB_PLL_MSS_BASE 0x0E001000 #define IOSCB_CFM_MSS_BASE 0x0E002000 #define IOSCB_PLL_DDR_BASE 0x0E010000 @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps mchp_pfsoc_dummy_ops = { /* All PLL modules in IOSCB have the same register layout */ #define PLL_CTRL 0x04 +#define PLL_REF_FB 0x08 +#define PLL_DIV_0_1 0x10 +#define PLL_DIV_2_3 0x14 +#define PLL_CTRL2 0x18 +#define PLL_CAL 0x1c +#define PLL_PHADJ 0x20 +#define SSCG_REG_0 0x24 +#define SSCG_REG_1 0x28 +#define SSCG_REG_2 0x2c +#define SSCG_REG_3 0x30 static uint64_t mchp_pfsoc_pll_read(void *opaque, hwaddr offset, unsigned size) @@ -XXX,XX +XXX,XX @@ static uint64_t mchp_pfsoc_pll_read(void *opaque, hwaddr offset, /* PLL is locked */ val = BIT(25); break; + case PLL_DIV_0_1: + case PLL_DIV_2_3: + val = 0x01000100; /* return valid post divider values */ + break; + case PLL_CTRL2: + val = 0x00001110; + break; + case PLL_REF_FB: + val = 0x00000100; /* RFDIV := 1 */ + break; + case SSCG_REG_2: + val = 0x00000001; /* INTIN := 1 */ + break; + case PLL_PHADJ: + val = 0x00000401; + break; default: qemu_log_mask(LOG_UNIMP, "%s: unimplemented device read " "(size %d, offset 0x%" HWADDR_PRIx ")\n", @@ -XXX,XX +XXX,XX @@ static uint64_t mchp_pfsoc_pll_read(void *opaque, hwaddr offset, return val; } +static void mchp_pfsoc_pll_write(void *opaque, hwaddr offset, + uint64_t value, unsigned size) +{ + qemu_log_mask(LOG_UNIMP, "%s: unimplemented device write " + "(size %d, value 0x%" PRIx64 + ", offset 0x%" HWADDR_PRIx ")\n", + __func__, size, value, offset); +} + static const MemoryRegionOps mchp_pfsoc_pll_ops = { .read = mchp_pfsoc_pll_read, - .write = mchp_pfsoc_dummy_write, + .write = mchp_pfsoc_pll_write, .endianness = DEVICE_LITTLE_ENDIAN, }; @@ -XXX,XX +XXX,XX @@ static void mchp_pfsoc_ioscb_realize(DeviceState *dev, Error **errp) "mchp.pfsoc.ioscb.ccc", IOSCB_CCC_REG_SIZE); memory_region_add_subregion(&s->container, IOSCB_CCC_BASE, &s->ccc); + memory_region_init_io(&s->pll_nw_0, OBJECT(s), &mchp_pfsoc_pll_ops, s, + "mchp.pfsoc.ioscb.pll_nw_0", IOSCB_SUBMOD_REG_SIZE); + memory_region_add_subregion(&s->container, IOSCB_PLL_NW0_BASE, &s->pll_nw_0); + + memory_region_init_io(&s->pll_nw_1, OBJECT(s), &mchp_pfsoc_pll_ops, s, + "mchp.pfsoc.ioscb.pll_nw_1", IOSCB_SUBMOD_REG_SIZE); + memory_region_add_subregion(&s->container, IOSCB_PLL_NW1_BASE, &s->pll_nw_1); + memory_region_init_io(&s->pll_mss, OBJECT(s), &mchp_pfsoc_pll_ops, s, "mchp.pfsoc.ioscb.pll_mss", IOSCB_SUBMOD_REG_SIZE); memory_region_add_subregion(&s->container, IOSCB_PLL_MSS_BASE, &s->pll_mss); diff --git a/hw/misc/mchp_pfsoc_sysreg.c b/hw/misc/mchp_pfsoc_sysreg.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/mchp_pfsoc_sysreg.c +++ b/hw/misc/mchp_pfsoc_sysreg.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/mchp_pfsoc_sysreg.h" #include "system/runstate.h" +#define CLOCK_CONFIG_CR 0x8 +#define RTC_CLOCK_CR 0xc #define MSS_RESET_CR 0x18 #define ENVM_CR 0xb8 #define MESSAGE_INT 0x118c @@ -XXX,XX +XXX,XX @@ static uint64_t mchp_pfsoc_sysreg_read(void *opaque, hwaddr offset, uint32_t val = 0; switch (offset) { + case CLOCK_CONFIG_CR: + /* Icicle kit reference design cpu/axi/ahb divider setting */ + val = 0x24; + break; + case RTC_CLOCK_CR: + /* + * Bit 16 enables the RTC clock, 0x7d is the required divider + * setting for a 125 MHz reference. + */ + val = BIT(16) | 0x7d; + break; case ENVM_CR: /* Indicate the eNVM is running at the configured divider rate */ val = BIT(6); -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> The entry was missing from isa_edata_arr[]. Fixes: 32bbab666 ("target/riscv: add draft RISC-V Zbr ext as xbr0p93") Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-2-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(svrsw60t59b, PRIV_VERSION_1_13_0, ext_svrsw60t59b), ISA_EXT_DATA_ENTRY(svukte, PRIV_VERSION_1_13_0, ext_svukte), ISA_EXT_DATA_ENTRY(svvptc, PRIV_VERSION_1_13_0, ext_svvptc), + ISA_EXT_DATA_ENTRY(xlrbr, PRIV_VERSION_1_13_0, ext_xlrbr), ISA_EXT_DATA_ENTRY(xmipscbop, PRIV_VERSION_1_12_0, ext_xmipscbop), ISA_EXT_DATA_ENTRY(xmipscmov, PRIV_VERSION_1_12_0, ext_xmipscmov), ISA_EXT_DATA_ENTRY(xmipslsp, PRIV_VERSION_1_12_0, ext_xmipslsp), -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Noticed when realizing that 'svadu' was too far apart from 'svade'. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-3-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(smcdeleg, PRIV_VERSION_1_13_0, ext_smcdeleg), ISA_EXT_DATA_ENTRY(smcntrpmf, PRIV_VERSION_1_12_0, ext_smcntrpmf), ISA_EXT_DATA_ENTRY(smcsrind, PRIV_VERSION_1_13_0, ext_smcsrind), + ISA_EXT_DATA_ENTRY(smctr, PRIV_VERSION_1_12_0, ext_smctr), ISA_EXT_DATA_ENTRY(smdbltrp, PRIV_VERSION_1_13_0, ext_smdbltrp), ISA_EXT_DATA_ENTRY(smepmp, PRIV_VERSION_1_12_0, ext_smepmp), ISA_EXT_DATA_ENTRY(smpmpmt, PRIV_VERSION_1_12_0, ext_smpmpmt), @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(sscofpmf, PRIV_VERSION_1_12_0, ext_sscofpmf), ISA_EXT_DATA_ENTRY(sscounterenw, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(sscsrind, PRIV_VERSION_1_12_0, ext_sscsrind), + ISA_EXT_DATA_ENTRY(ssctr, PRIV_VERSION_1_12_0, ext_ssctr), ISA_EXT_DATA_ENTRY(ssdbltrp, PRIV_VERSION_1_13_0, ext_ssdbltrp), ISA_EXT_DATA_ENTRY(ssnpm, PRIV_VERSION_1_13_0, ext_ssnpm), ISA_EXT_DATA_ENTRY(sspm, PRIV_VERSION_1_13_0, ext_sspm), @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(ssu64xl, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(supm, PRIV_VERSION_1_13_0, ext_supm), ISA_EXT_DATA_ENTRY(svade, PRIV_VERSION_1_11_0, ext_svade), - ISA_EXT_DATA_ENTRY(smctr, PRIV_VERSION_1_12_0, ext_smctr), - ISA_EXT_DATA_ENTRY(ssctr, PRIV_VERSION_1_12_0, ext_ssctr), ISA_EXT_DATA_ENTRY(svadu, PRIV_VERSION_1_12_0, ext_svadu), ISA_EXT_DATA_ENTRY(svinval, PRIV_VERSION_1_12_0, ext_svinval), ISA_EXT_DATA_ENTRY(svnapot, PRIV_VERSION_1_12_0, ext_svnapot), -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> We want to reduce the usage of the riscv_cpu_* arrays in target/riscv/cpu.c, centering everything in isa_edata_arr[] instead, to reduce data duplication and make our lives a bit easier when adding new extensions. To do that we'll have to make isa_edata_arr[] do what the other arrays are currently doing, not breaking existing semantics in the process. The riscv_cpu_* arrays have a few exclusive uses: - set default extensions for rv32 and rv64; - create user CPU properties; - misc uses around tcg-cpu.c and kvm-cpu.c. We'll slowly make isa_edata_arr[] supersede these arrays. Start by adding a new 'prop_name' field in RISCVIsaExtData. This field is needed because not all extensions have properties and not all properties match the riscv,isa string name. Create two additional macros and reclassify existing isa_edata_arr[] entries as follows: - ISA_EXT_DATA_ENTRY creates an entry where prop_name == riscv,isa. Most of our regular extensions fall into this category; - ISA_EXPERIMENTAL_EXT_DATA_ENTRY: same as above but add a "x-" to the prop name, i.e. prop_name == "x-" + riscv,isa; - ISA_INTERNAL_EXT_DATA_ENTRY: used to declared internal extensions. By 'internal' we mean users/management can't set them on or off. With these new macros we can start our simplification by changing riscv-qmp-cmds to use isa_edata_arr[]. We'll just scroll through it once and gather what we need. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-4-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 1 + target/riscv/cpu.c | 60 +++++++++++++++++++++++------------ target/riscv/riscv-qmp-cmds.c | 30 ++++-------------- 3 files changed, 47 insertions(+), 44 deletions(-) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ extern const RISCVCPUMultiExtConfig riscv_cpu_named_features[]; typedef struct isa_ext_data { const char *name; + const char *prop_name; int min_version; int ext_enable_offset; } RISCVIsaExtData; diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_cfg_merge(RISCVCPUConfig *dest, const RISCVCPUConfig *src) #include "cpu_cfg_fields.h.inc" } +/* Use this for regular user facing extensions */ #define ISA_EXT_DATA_ENTRY(_name, _min_ver, _prop) \ - {#_name, _min_ver, CPU_CFG_OFFSET(_prop)} + {#_name, #_name, _min_ver, CPU_CFG_OFFSET(_prop)} + +/* + * Same as above but for experimental extensions. We'll add a + * "x-" right after "_name" when creating the user property. + */ +#define ISA_EXPERIMENTAL_EXT_DATA_ENTRY(_name, _min_ver, _prop) \ + {#_name, "x-" #_name, _min_ver, CPU_CFG_OFFSET(_prop)} + +/* + * Internal extensions are extensions we will declare in the + * riscv,isa DT but they don't have an user property, i.e. + * users/management can't enable/disable them. + */ +#define ISA_INTERNAL_EXT_DATA_ENTRY(_name, _min_ver, _prop) \ + {#_name, NULL, _min_ver, CPU_CFG_OFFSET(_prop)} /* * Here are the ordering rules of extension naming defined by RISC-V @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_cfg_merge(RISCVCPUConfig *dest, const RISCVCPUConfig *src) * instead. */ const RISCVIsaExtData isa_edata_arr[] = { - ISA_EXT_DATA_ENTRY(zic64b, PRIV_VERSION_1_12_0, ext_zic64b), + ISA_INTERNAL_EXT_DATA_ENTRY(zic64b, PRIV_VERSION_1_12_0, ext_zic64b), ISA_EXT_DATA_ENTRY(zicbom, PRIV_VERSION_1_12_0, ext_zicbom), ISA_EXT_DATA_ENTRY(zicbop, PRIV_VERSION_1_12_0, ext_zicbop), ISA_EXT_DATA_ENTRY(zicboz, PRIV_VERSION_1_12_0, ext_zicboz), - ISA_EXT_DATA_ENTRY(ziccamoa, PRIV_VERSION_1_11_0, has_priv_1_11), - ISA_EXT_DATA_ENTRY(ziccif, PRIV_VERSION_1_11_0, has_priv_1_11), - ISA_EXT_DATA_ENTRY(zicclsm, PRIV_VERSION_1_11_0, has_priv_1_11), + ISA_INTERNAL_EXT_DATA_ENTRY(ziccamoa, PRIV_VERSION_1_11_0, has_priv_1_11), + ISA_INTERNAL_EXT_DATA_ENTRY(ziccif, PRIV_VERSION_1_11_0, has_priv_1_11), + ISA_INTERNAL_EXT_DATA_ENTRY(zicclsm, PRIV_VERSION_1_11_0, has_priv_1_11), ISA_EXT_DATA_ENTRY(ziccrse, PRIV_VERSION_1_11_0, ext_ziccrse), ISA_EXT_DATA_ENTRY(zicfilp, PRIV_VERSION_1_12_0, ext_zicfilp), ISA_EXT_DATA_ENTRY(zicfiss, PRIV_VERSION_1_13_0, ext_zicfiss), @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(zilsd, PRIV_VERSION_1_12_0, ext_zilsd), ISA_EXT_DATA_ENTRY(zimop, PRIV_VERSION_1_13_0, ext_zimop), ISA_EXT_DATA_ENTRY(zmmul, PRIV_VERSION_1_12_0, ext_zmmul), - ISA_EXT_DATA_ENTRY(za64rs, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(za64rs, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(zaamo, PRIV_VERSION_1_12_0, ext_zaamo), ISA_EXT_DATA_ENTRY(zabha, PRIV_VERSION_1_13_0, ext_zabha), ISA_EXT_DATA_ENTRY(zacas, PRIV_VERSION_1_12_0, ext_zacas), @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(zhinx, PRIV_VERSION_1_12_0, ext_zhinx), ISA_EXT_DATA_ENTRY(zhinxmin, PRIV_VERSION_1_12_0, ext_zhinxmin), ISA_EXT_DATA_ENTRY(sdtrig, PRIV_VERSION_1_12_0, debug), - ISA_EXT_DATA_ENTRY(shcounterenw, PRIV_VERSION_1_12_0, has_priv_1_12), - ISA_EXT_DATA_ENTRY(sha, PRIV_VERSION_1_12_0, ext_sha), - ISA_EXT_DATA_ENTRY(shgatpa, PRIV_VERSION_1_12_0, has_priv_1_12), - ISA_EXT_DATA_ENTRY(shtvala, PRIV_VERSION_1_12_0, has_priv_1_12), - ISA_EXT_DATA_ENTRY(shvsatpa, PRIV_VERSION_1_12_0, has_priv_1_12), - ISA_EXT_DATA_ENTRY(shvstvala, PRIV_VERSION_1_12_0, has_priv_1_12), - ISA_EXT_DATA_ENTRY(shvstvecd, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(shcounterenw, PRIV_VERSION_1_12_0, + has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(sha, PRIV_VERSION_1_12_0, ext_sha), + ISA_INTERNAL_EXT_DATA_ENTRY(shgatpa, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(shtvala, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(shvsatpa, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(shvstvala, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(shvstvecd, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(smaia, PRIV_VERSION_1_12_0, ext_smaia), ISA_EXT_DATA_ENTRY(smcdeleg, PRIV_VERSION_1_13_0, ext_smcdeleg), ISA_EXT_DATA_ENTRY(smcntrpmf, PRIV_VERSION_1_12_0, ext_smcntrpmf), @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(smstateen, PRIV_VERSION_1_12_0, ext_smstateen), ISA_EXT_DATA_ENTRY(ssaia, PRIV_VERSION_1_12_0, ext_ssaia), ISA_EXT_DATA_ENTRY(ssccfg, PRIV_VERSION_1_13_0, ext_ssccfg), - ISA_EXT_DATA_ENTRY(ssccptr, PRIV_VERSION_1_11_0, has_priv_1_11), + ISA_INTERNAL_EXT_DATA_ENTRY(ssccptr, PRIV_VERSION_1_11_0, has_priv_1_11), ISA_EXT_DATA_ENTRY(sscofpmf, PRIV_VERSION_1_12_0, ext_sscofpmf), - ISA_EXT_DATA_ENTRY(sscounterenw, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(sscounterenw, PRIV_VERSION_1_12_0, + has_priv_1_12), ISA_EXT_DATA_ENTRY(sscsrind, PRIV_VERSION_1_12_0, ext_sscsrind), ISA_EXT_DATA_ENTRY(ssctr, PRIV_VERSION_1_12_0, ext_ssctr), ISA_EXT_DATA_ENTRY(ssdbltrp, PRIV_VERSION_1_13_0, ext_ssdbltrp), ISA_EXT_DATA_ENTRY(ssnpm, PRIV_VERSION_1_13_0, ext_ssnpm), ISA_EXT_DATA_ENTRY(sspm, PRIV_VERSION_1_13_0, ext_sspm), - ISA_EXT_DATA_ENTRY(ssstateen, PRIV_VERSION_1_12_0, ext_ssstateen), - ISA_EXT_DATA_ENTRY(ssstrict, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(ssstateen, PRIV_VERSION_1_12_0, ext_ssstateen), + ISA_INTERNAL_EXT_DATA_ENTRY(ssstrict, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(sstc, PRIV_VERSION_1_12_0, ext_sstc), - ISA_EXT_DATA_ENTRY(sstvala, PRIV_VERSION_1_12_0, has_priv_1_12), - ISA_EXT_DATA_ENTRY(sstvecd, PRIV_VERSION_1_12_0, has_priv_1_12), - ISA_EXT_DATA_ENTRY(ssu64xl, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(sstvala, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(sstvecd, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(ssu64xl, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(supm, PRIV_VERSION_1_13_0, ext_supm), ISA_EXT_DATA_ENTRY(svade, PRIV_VERSION_1_11_0, ext_svade), ISA_EXT_DATA_ENTRY(svadu, PRIV_VERSION_1_12_0, ext_svadu), @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(svnapot, PRIV_VERSION_1_12_0, ext_svnapot), ISA_EXT_DATA_ENTRY(svpbmt, PRIV_VERSION_1_12_0, ext_svpbmt), ISA_EXT_DATA_ENTRY(svrsw60t59b, PRIV_VERSION_1_13_0, ext_svrsw60t59b), - ISA_EXT_DATA_ENTRY(svukte, PRIV_VERSION_1_13_0, ext_svukte), + ISA_EXPERIMENTAL_EXT_DATA_ENTRY(svukte, PRIV_VERSION_1_13_0, ext_svukte), ISA_EXT_DATA_ENTRY(svvptc, PRIV_VERSION_1_13_0, ext_svvptc), ISA_EXT_DATA_ENTRY(xlrbr, PRIV_VERSION_1_13_0, ext_xlrbr), ISA_EXT_DATA_ENTRY(xmipscbop, PRIV_VERSION_1_12_0, ext_xmipscbop), diff --git a/target/riscv/riscv-qmp-cmds.c b/target/riscv/riscv-qmp-cmds.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/riscv-qmp-cmds.c +++ b/target/riscv/riscv-qmp-cmds.c @@ -XXX,XX +XXX,XX @@ static void riscv_obj_add_qdict_prop(Object *obj, QDict *qdict_out, } } -static void riscv_obj_add_multiext_props(Object *obj, QDict *qdict_out, - const RISCVCPUMultiExtConfig *arr) +static void riscv_obj_add_multiext_props(Object *obj, QDict *qdict_out) { - for (int i = 0; arr[i].name != NULL; i++) { - riscv_obj_add_qdict_prop(obj, qdict_out, arr[i].name); - } -} + const RISCVIsaExtData *edata; -static void riscv_obj_add_named_feats_qdict(Object *obj, QDict *qdict_out) -{ - const RISCVCPUMultiExtConfig *named_cfg; - RISCVCPU *cpu = RISCV_CPU(obj); - QObject *value; - bool flag_val; - - for (int i = 0; riscv_cpu_named_features[i].name != NULL; i++) { - named_cfg = &riscv_cpu_named_features[i]; - flag_val = isa_ext_is_enabled(cpu, named_cfg->offset); - value = QOBJECT(qbool_from_bool(flag_val)); - - qdict_put_obj(qdict_out, named_cfg->name, value); + for (edata = isa_edata_arr; edata && edata->name; edata++) { + if (edata->prop_name) { + riscv_obj_add_qdict_prop(obj, qdict_out, edata->prop_name); + } } } @@ -XXX,XX +XXX,XX @@ CpuModelExpansionInfo *qmp_query_cpu_model_expansion(CpuModelExpansionType type, qdict_out = qdict_new(); - riscv_obj_add_multiext_props(obj, qdict_out, riscv_cpu_extensions); - riscv_obj_add_multiext_props(obj, qdict_out, riscv_cpu_experimental_exts); - riscv_obj_add_multiext_props(obj, qdict_out, riscv_cpu_vendor_exts); - riscv_obj_add_named_feats_qdict(obj, qdict_out); + riscv_obj_add_multiext_props(obj, qdict_out); riscv_obj_add_profiles_qdict(obj, qdict_out); /* Add our CPU boolean options too */ -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Commit 7e4f75cadf ("target/riscv/tcg: hide warn for named feats when disabling via priv_ver") changed the design of disable_priv_spec_isa_exts to not warn when disabling what we were calling "named features" at that time. Back in that time we were adding RVA22 profile support and we were dealing with a RVI innovation: named features. These can be define as cute names for pre-existing behavior/parameters, e.g. 'zic64b' means all cache blocks must have 64 bytes. They do get inserted in the riscv,isa but they are not "real" extensions because users shouldn't be setting them in the command line, or so we thought back then, and we attempted to model that by calling it "named features". This didn't age that well: ziccrse is a so called named feature as far as TCG goes, but then KVM had to treat it as a regular extension that can be user set and we made an exception: ziccrse is a named feature that is user set by KVM. "Named features" are regular extensions that might or might not be user set, and might or might not warrant special handling during realize() by setting other parameters. And we'll being treating them as such, which will culminate in the end of riscv_cpu_named_features[] array in the end. This reverts commit 7e4f75cadf44ee67809c7ca82645a289a5268966. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-5-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 13 +++---------- 1 file changed, 3 insertions(+), 10 deletions(-) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_disable_priv_spec_isa_exts(RISCVCPU *cpu) } isa_ext_update_enabled(cpu, edata->ext_enable_offset, false); - - /* - * Do not show user warnings for named features that users - * can't enable/disable in the command line. See commit - * 68c9e54bea for more info. - */ - if (cpu_cfg_offset_is_named_feat(edata->ext_enable_offset)) { - continue; - } #ifndef CONFIG_USER_ONLY warn_report("disabling %s extension for hart 0x%" PRIx64 " because privilege spec version does not match", @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_update_named_features(RISCVCPU *cpu) cpu->cfg.has_priv_1_13 = true; } + /* zic64b is 1.12 or later */ cpu->cfg.ext_zic64b = cpu->cfg.cbom_blocksize == 64 && cpu->cfg.cbop_blocksize == 64 && - cpu->cfg.cboz_blocksize == 64; + cpu->cfg.cboz_blocksize == 64 && + cpu->cfg.has_priv_1_12; cpu->cfg.ext_ssstateen = cpu->cfg.ext_smstateen; -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> We're using both isa_edata_arr[] and riscv_cpu_named_features[] to find an extension name based on a cfg offset. This is reminiscent of a past where isa_edata_arr[] didn't include entries for internal extensions. At this point we can use just isa_edata_arr[]. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-6-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static int cpu_cfg_ext_get_min_version(uint32_t ext_offset) static const char *cpu_cfg_ext_get_name(uint32_t ext_offset) { - const RISCVCPUMultiExtConfig *feat; const RISCVIsaExtData *edata; for (edata = isa_edata_arr; edata->name != NULL; edata++) { @@ -XXX,XX +XXX,XX @@ static const char *cpu_cfg_ext_get_name(uint32_t ext_offset) } } - for (feat = riscv_cpu_named_features; feat->name != NULL; feat++) { - if (feat->offset == ext_offset) { - return feat->name; - } - } - g_assert_not_reached(); } -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Deprecate riscv_cpu_enable_named_feat() by creating implied rules for 'sha' and 'ssstateen'. 'zic64' is always true given that our default block size is set to 64. With this change we homogeneize extension handling when enabling profiles. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-7-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 25 ++++++++++++++++++++++-- target/riscv/tcg/tcg-cpu.c | 40 -------------------------------------- 2 files changed, 23 insertions(+), 42 deletions(-) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static RISCVCPUImpliedExtsRule ZVKSG_IMPLIED = { }, }; +static RISCVCPUImpliedExtsRule SHA_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_sha), + .implied_misa_exts = RVH, + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_smstateen), + CPU_CFG_OFFSET(ext_ssstateen), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + static RISCVCPUImpliedExtsRule SSCFG_IMPLIED = { .ext = CPU_CFG_OFFSET(ext_ssccfg), .implied_multi_exts = { @@ -XXX,XX +XXX,XX @@ static RISCVCPUImpliedExtsRule SSCTR_IMPLIED = { }, }; +static RISCVCPUImpliedExtsRule SSSTATEEN_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_ssstateen), + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_smstateen), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + static RISCVCPUImpliedExtsRule ZVFBFA_IMPLIED = { .ext = CPU_CFG_OFFSET(ext_zvfbfa), .implied_multi_exts = { @@ -XXX,XX +XXX,XX @@ RISCVCPUImpliedExtsRule *riscv_multi_ext_implied_rules[] = { &ZVFBFA_IMPLIED, &ZVFBFMIN_IMPLIED, &ZVFBFWMA_IMPLIED, &ZVFH_IMPLIED, &ZVFHMIN_IMPLIED, &ZVKN_IMPLIED, &ZVKNC_IMPLIED, &ZVKNG_IMPLIED, &ZVKNHB_IMPLIED, - &ZVKS_IMPLIED, &ZVKSC_IMPLIED, &ZVKSG_IMPLIED, &SSCFG_IMPLIED, - &SUPM_IMPLIED, &SSPM_IMPLIED, &SMCTR_IMPLIED, &SSCTR_IMPLIED, + &ZVKS_IMPLIED, &ZVKSC_IMPLIED, &ZVKSG_IMPLIED, &SHA_IMPLIED, + &SSCFG_IMPLIED, &SUPM_IMPLIED, &SSPM_IMPLIED, &SMCTR_IMPLIED, + &SSCTR_IMPLIED, &SSSTATEEN_IMPLIED, NULL }; diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static const char *cpu_cfg_ext_get_name(uint32_t ext_offset) g_assert_not_reached(); } -static bool cpu_cfg_offset_is_named_feat(uint32_t ext_offset) -{ - const RISCVCPUMultiExtConfig *feat; - - for (feat = riscv_cpu_named_features; feat->name != NULL; feat++) { - if (feat->offset == ext_offset) { - return true; - } - } - - return false; -} - -static void riscv_cpu_enable_named_feat(RISCVCPU *cpu, uint32_t feat_offset) -{ - /* - * All other named features are already enabled - * in riscv_tcg_cpu_instance_init(). - */ - switch (feat_offset) { - case CPU_CFG_OFFSET(ext_zic64b): - cpu->cfg.cbom_blocksize = 64; - cpu->cfg.cbop_blocksize = 64; - cpu->cfg.cboz_blocksize = 64; - break; - case CPU_CFG_OFFSET(ext_sha): - if (!cpu_misa_ext_is_user_set(RVH)) { - riscv_cpu_write_misa_bit(cpu, RVH, true); - } - /* fallthrough */ - case CPU_CFG_OFFSET(ext_ssstateen): - cpu->cfg.ext_smstateen = true; - break; - } -} - static void cpu_bump_multi_ext_priv_ver(CPURISCVState *env, uint32_t ext_offset) { @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_set_profile(RISCVCPU *cpu, ext_offset = profile->ext_offsets[i]; if (profile->enabled) { - if (cpu_cfg_offset_is_named_feat(ext_offset)) { - riscv_cpu_enable_named_feat(cpu, ext_offset); - } - cpu_bump_multi_ext_priv_ver(&cpu->env, ext_offset); } -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> This array has no uses left. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-8-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 1 - target/riscv/cpu.c | 26 -------------------------- target/riscv/tcg/tcg-cpu.c | 4 ++-- 3 files changed, 2 insertions(+), 29 deletions(-) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct RISCVCPUMultiExtConfig { extern const RISCVCPUMultiExtConfig riscv_cpu_extensions[]; extern const RISCVCPUMultiExtConfig riscv_cpu_vendor_exts[]; extern const RISCVCPUMultiExtConfig riscv_cpu_experimental_exts[]; -extern const RISCVCPUMultiExtConfig riscv_cpu_named_features[]; typedef struct isa_ext_data { const char *name; diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const RISCVCPUMultiExtConfig riscv_cpu_experimental_exts[] = { { }, }; -/* - * 'Named features' is the name we give to extensions that we - * don't want to expose to users. They are either immutable - * (always enabled/disable) or they'll vary depending on - * the resulting CPU state. - * - * Some of them are always enabled depending on priv version - * of the CPU and are declared directly in isa_edata_arr[]. - * The ones listed here have special checks during finalize() - * time and require their own flags like regular extensions. - * See riscv_cpu_update_named_features() for more info. - */ -const RISCVCPUMultiExtConfig riscv_cpu_named_features[] = { - MULTI_EXT_CFG_BOOL("zic64b", ext_zic64b, true), - MULTI_EXT_CFG_BOOL("ssstateen", ext_ssstateen, true), - MULTI_EXT_CFG_BOOL("sha", ext_sha, true), - - /* - * 'ziccrse' has its own flag because the KVM driver - * wants to enable/disable it on its own accord. - */ - MULTI_EXT_CFG_BOOL("ziccrse", ext_ziccrse, true), - - { }, -}; - static void cpu_set_prop_err(RISCVCPU *cpu, const char *propname, Error **errp) { diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_disable_priv_spec_isa_exts(RISCVCPU *cpu) } } -static void riscv_cpu_update_named_features(RISCVCPU *cpu) +static void riscv_cpu_update_cfg(RISCVCPU *cpu) { if (cpu->env.priv_ver >= PRIV_VERSION_1_11_0) { cpu->cfg.has_priv_1_11 = true; @@ -XXX,XX +XXX,XX @@ void riscv_tcg_cpu_finalize_features(RISCVCPU *cpu, Error **errp) return; } - riscv_cpu_update_named_features(cpu); + riscv_cpu_update_cfg(cpu); riscv_cpu_validate_profiles(cpu); if (cpu->cfg.ext_smepmp && !cpu->cfg.pmp) { -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> The non-standard extensions, in this particular function the vendor extensions, are all riscv,isa names that starts with 'x'. In theory this is a bit slower than using riscv_cpu_vendor_exts (isa_edata_arr is longer) but riscv_cpu_update_misa_x() is executed only once during finalize(), i.e. not a hot path. We're accepting a tiny performance hit as as a tradeoff for the code simplication we'll have later by removing all riscv_cpu_* arrays. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-9-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_update_misa_c(RISCVCPU *cpu) static void riscv_cpu_update_misa_x(RISCVCPU *cpu) { CPURISCVState *env = &cpu->env; - const RISCVCPUMultiExtConfig *arr = riscv_cpu_vendor_exts; + const RISCVIsaExtData *edata; - for (int i = 0; arr[i].name != NULL; i++) { - if (isa_ext_is_enabled(cpu, arr[i].offset)) { + for (edata = isa_edata_arr; edata && edata->name; edata++) { + if (edata->name[0] == 'x' + && isa_ext_is_enabled(cpu, edata->ext_enable_offset)) { riscv_cpu_set_misa_ext(env, env->misa_ext | RVX); break; } -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Use isa_edata_arr[] directly instead of going through 3 different arrays to populate the unavailable KVM properties. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-10-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/kvm/kvm-cpu.c | 25 ++++++++++--------------- 1 file changed, 10 insertions(+), 15 deletions(-) diff --git a/target/riscv/kvm/kvm-cpu.c b/target/riscv/kvm/kvm-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/kvm/kvm-cpu.c +++ b/target/riscv/kvm/kvm-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_add_kvm_unavail_prop(Object *obj, const char *prop_name) NULL, (void *)prop_name); } -static void riscv_cpu_add_kvm_unavail_prop_array(Object *obj, - const RISCVCPUMultiExtConfig *array) -{ - const RISCVCPUMultiExtConfig *prop; - - g_assert(array); - - for (prop = array; prop && prop->name; prop++) { - riscv_cpu_add_kvm_unavail_prop(obj, prop->name); - } -} - static void kvm_riscv_add_cpu_user_properties(Object *cpu_obj) { + const RISCVIsaExtData *edata; int i; riscv_add_satp_mode_properties(cpu_obj); @@ -XXX,XX +XXX,XX @@ static void kvm_riscv_add_cpu_user_properties(Object *cpu_obj) NULL, multi_cfg); } - riscv_cpu_add_kvm_unavail_prop_array(cpu_obj, riscv_cpu_extensions); - riscv_cpu_add_kvm_unavail_prop_array(cpu_obj, riscv_cpu_vendor_exts); - riscv_cpu_add_kvm_unavail_prop_array(cpu_obj, riscv_cpu_experimental_exts); + /* + * Mark all isa_edata_arr properties that collides with + * a KVM property as unavailable. + */ + for (edata = isa_edata_arr; edata && edata->name; edata++) { + if (edata->prop_name) { + riscv_cpu_add_kvm_unavail_prop(cpu_obj, edata->prop_name); + } + } /* We don't have the needed KVM support for profiles */ for (i = 0; riscv_profiles[i] != NULL; i++) { -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Use isa_edata_arr[] to enable all feasible extensions. Filter experimental and vendor extensions by checking if the riscv,isa or the prop name starts with 'x'. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-11-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_init_max_cpu_extensions(Object *obj) { RISCVCPU *cpu = RISCV_CPU(obj); CPURISCVState *env = &cpu->env; - const RISCVCPUMultiExtConfig *prop; + const RISCVIsaExtData *edata; /* Enable RVG and RVV that are disabled by default */ riscv_cpu_set_misa_ext(env, env->misa_ext | RVB | RVG | RVV); - for (prop = riscv_cpu_extensions; prop && prop->name; prop++) { - isa_ext_update_enabled(cpu, prop->offset, true); + for (edata = isa_edata_arr; edata && edata->name; edata++) { + if (edata->name[0] == 'x' + || (edata->prop_name && edata->prop_name[0] == 'x')) { + continue; + } + + isa_ext_update_enabled(cpu, edata->ext_enable_offset, true); } /* -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> The cpu_get_multi_ext_cfg/cpu_set_multi_ext_cfg callbacks are using a RISCVCPUMultiExtConfig pointer as opaque, but internally we're just using multi_ext_cfg->offset. Use multi_ext_cfg->offset as opaque instead. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-12-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_add_profiles(Object *cpu_obj) static void cpu_set_multi_ext_cfg(Object *obj, Visitor *v, const char *name, void *opaque, Error **errp) { - const RISCVCPUMultiExtConfig *multi_ext_cfg = opaque; RISCVCPU *cpu = RISCV_CPU(obj); + uint32_t cfg_offset = *(uint32_t *)opaque; bool vendor_cpu = riscv_cpu_is_vendor(obj); bool prev_val, value; @@ -XXX,XX +XXX,XX @@ static void cpu_set_multi_ext_cfg(Object *obj, Visitor *v, const char *name, return; } - cpu_cfg_ext_add_user_opt(multi_ext_cfg->offset, value); + cpu_cfg_ext_add_user_opt(cfg_offset, value); - prev_val = isa_ext_is_enabled(cpu, multi_ext_cfg->offset); + prev_val = isa_ext_is_enabled(cpu, cfg_offset); if (value == prev_val) { return; @@ -XXX,XX +XXX,XX @@ static void cpu_set_multi_ext_cfg(Object *obj, Visitor *v, const char *name, } if (value) { - cpu_bump_multi_ext_priv_ver(&cpu->env, multi_ext_cfg->offset); + cpu_bump_multi_ext_priv_ver(&cpu->env, cfg_offset); } - isa_ext_update_enabled(cpu, multi_ext_cfg->offset, value); + isa_ext_update_enabled(cpu, cfg_offset, value); } static void cpu_get_multi_ext_cfg(Object *obj, Visitor *v, const char *name, void *opaque, Error **errp) { - const RISCVCPUMultiExtConfig *multi_ext_cfg = opaque; - bool value = isa_ext_is_enabled(RISCV_CPU(obj), multi_ext_cfg->offset); + uint32_t cfg_offset = *(uint32_t *)opaque; + bool value = isa_ext_is_enabled(RISCV_CPU(obj), cfg_offset); visit_type_bool(v, name, &value, errp); } @@ -XXX,XX +XXX,XX @@ static void cpu_add_multi_ext_prop(Object *cpu_obj, object_property_add(cpu_obj, multi_cfg->name, "bool", cpu_get_multi_ext_cfg, cpu_set_multi_ext_cfg, - NULL, (void *)multi_cfg); + NULL, (void *)&multi_cfg->offset); if (!generic_cpu) { return; -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Do not rely on riscv_cpu_* arrays to set rv32/rv64 CPU defaults - add them to the CPU definition like we do with all other CPUs (aside from 'max'). Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-13-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 40 ++++++++++++++++++++++++++++++++++++++ target/riscv/tcg/tcg-cpu.c | 14 ------------- 2 files changed, 40 insertions(+), 14 deletions(-) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static const TypeInfo riscv_cpu_type_infos[] = { DEFINE_RISCV_CPU(TYPE_RISCV_CPU_BASE32, TYPE_RISCV_DYNAMIC_CPU, .cfg.max_satp_mode = VM_1_10_SV32, .misa_mxl_max = MXL_RV32, + + /* Default extensions as of QEMU 11.1. */ + .cfg.ext_zicbom = true, + .cfg.ext_zicbop = true, + .cfg.ext_zicboz = true, + .cfg.ext_zicntr = true, + .cfg.ext_zicsr = true, + .cfg.ext_zifencei = true, + .cfg.ext_zihintntl = true, + .cfg.ext_zihintpause = true, + .cfg.ext_zihpm = true, + .cfg.ext_zawrs = true, + .cfg.ext_zfa = true, + .cfg.ext_zba = true, + .cfg.ext_zbb = true, + .cfg.ext_zbc = true, + .cfg.ext_zbs = true, + .cfg.ext_sstc = true, + .cfg.ext_svadu = true, + .cfg.ext_svvptc = true, ), DEFINE_RISCV_CPU(TYPE_RISCV_CPU_IBEX, TYPE_RISCV_VENDOR_CPU, @@ -XXX,XX +XXX,XX @@ static const TypeInfo riscv_cpu_type_infos[] = { DEFINE_RISCV_CPU(TYPE_RISCV_CPU_BASE64, TYPE_RISCV_DYNAMIC_CPU, .cfg.max_satp_mode = VM_1_10_SV57, .misa_mxl_max = MXL_RV64, + + /* Default extensions as of QEMU 11.1. */ + .cfg.ext_zicbom = true, + .cfg.ext_zicbop = true, + .cfg.ext_zicboz = true, + .cfg.ext_zicntr = true, + .cfg.ext_zicsr = true, + .cfg.ext_zifencei = true, + .cfg.ext_zihintntl = true, + .cfg.ext_zihintpause = true, + .cfg.ext_zihpm = true, + .cfg.ext_zawrs = true, + .cfg.ext_zfa = true, + .cfg.ext_zba = true, + .cfg.ext_zbb = true, + .cfg.ext_zbc = true, + .cfg.ext_zbs = true, + .cfg.ext_sstc = true, + .cfg.ext_svadu = true, + .cfg.ext_svvptc = true, ), DEFINE_RISCV_CPU(TYPE_RISCV_CPU_SIFIVE_E51, TYPE_RISCV_CPU_SIFIVE_E, diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void cpu_get_multi_ext_cfg(Object *obj, Visitor *v, const char *name, static void cpu_add_multi_ext_prop(Object *cpu_obj, const RISCVCPUMultiExtConfig *multi_cfg) { - bool generic_cpu = riscv_cpu_is_generic(cpu_obj); - object_property_add(cpu_obj, multi_cfg->name, "bool", cpu_get_multi_ext_cfg, cpu_set_multi_ext_cfg, NULL, (void *)&multi_cfg->offset); - - if (!generic_cpu) { - return; - } - - /* - * Set def val directly instead of using - * object_property_set_bool() to save the set() - * callback hash for user inputs. - */ - isa_ext_update_enabled(RISCV_CPU(cpu_obj), multi_cfg->offset, - multi_cfg->enabled); } static void riscv_cpu_add_multiext_prop_array(Object *obj, -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> This change has been done twice now: one in riscv-qmp-cmds, another in the KVM. We're now ready to do it for TCG. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-14-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 34 ++++++++++------------------------ 1 file changed, 10 insertions(+), 24 deletions(-) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void cpu_get_multi_ext_cfg(Object *obj, Visitor *v, const char *name, visit_type_bool(v, name, &value, errp); } -static void cpu_add_multi_ext_prop(Object *cpu_obj, - const RISCVCPUMultiExtConfig *multi_cfg) -{ - object_property_add(cpu_obj, multi_cfg->name, "bool", - cpu_get_multi_ext_cfg, - cpu_set_multi_ext_cfg, - NULL, (void *)&multi_cfg->offset); -} - -static void riscv_cpu_add_multiext_prop_array(Object *obj, - const RISCVCPUMultiExtConfig *array) -{ - const RISCVCPUMultiExtConfig *prop; - - g_assert(array); - - for (prop = array; prop && prop->name; prop++) { - cpu_add_multi_ext_prop(obj, prop); - } -} - /* * Add CPU properties with user-facing flags. * @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_add_multiext_prop_array(Object *obj, */ static void riscv_cpu_add_user_properties(Object *obj) { + const RISCVIsaExtData *edata; + #ifndef CONFIG_USER_ONLY riscv_add_satp_mode_properties(obj); #endif riscv_cpu_add_misa_properties(obj); - riscv_cpu_add_multiext_prop_array(obj, riscv_cpu_extensions); - riscv_cpu_add_multiext_prop_array(obj, riscv_cpu_vendor_exts); - riscv_cpu_add_multiext_prop_array(obj, riscv_cpu_experimental_exts); + for (edata = isa_edata_arr; edata && edata->name; edata++) { + if (edata->prop_name) { + object_property_add(obj, edata->prop_name, "bool", + cpu_get_multi_ext_cfg, + cpu_set_multi_ext_cfg, + NULL, (void *)&edata->ext_enable_offset); + } + } riscv_cpu_add_profiles(obj); } -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> There is no more uses left for these arrays. isa_edata_arr[] is doing everything we need, making our lives a little easier when adding new extensions. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-15-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 10 --- target/riscv/cpu.c | 159 --------------------------------------------- 2 files changed, 169 deletions(-) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ bool isa_ext_is_enabled(RISCVCPU *cpu, uint32_t ext_offset); void riscv_cpu_set_misa_ext(CPURISCVState *env, uint32_t ext); bool riscv_cpu_is_vendor(Object *cpu_obj); -typedef struct RISCVCPUMultiExtConfig { - const char *name; - uint32_t offset; - bool enabled; -} RISCVCPUMultiExtConfig; - -extern const RISCVCPUMultiExtConfig riscv_cpu_extensions[]; -extern const RISCVCPUMultiExtConfig riscv_cpu_vendor_exts[]; -extern const RISCVCPUMultiExtConfig riscv_cpu_experimental_exts[]; - typedef struct isa_ext_data { const char *name; const char *prop_name; diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const char *riscv_get_misa_ext_description(uint32_t bit) return val; } -#define MULTI_EXT_CFG_BOOL(_name, _prop, _defval) \ - {.name = _name, .offset = CPU_CFG_OFFSET(_prop), \ - .enabled = _defval} - -const RISCVCPUMultiExtConfig riscv_cpu_extensions[] = { - /* Defaults for standard extensions */ - MULTI_EXT_CFG_BOOL("sscofpmf", ext_sscofpmf, false), - MULTI_EXT_CFG_BOOL("smcntrpmf", ext_smcntrpmf, false), - MULTI_EXT_CFG_BOOL("smcsrind", ext_smcsrind, false), - MULTI_EXT_CFG_BOOL("smcdeleg", ext_smcdeleg, false), - MULTI_EXT_CFG_BOOL("sscsrind", ext_sscsrind, false), - MULTI_EXT_CFG_BOOL("ssccfg", ext_ssccfg, false), - MULTI_EXT_CFG_BOOL("smctr", ext_smctr, false), - MULTI_EXT_CFG_BOOL("ssctr", ext_ssctr, false), - MULTI_EXT_CFG_BOOL("zifencei", ext_zifencei, true), - MULTI_EXT_CFG_BOOL("zicfilp", ext_zicfilp, false), - MULTI_EXT_CFG_BOOL("zicfiss", ext_zicfiss, false), - MULTI_EXT_CFG_BOOL("zicsr", ext_zicsr, true), - MULTI_EXT_CFG_BOOL("zihintntl", ext_zihintntl, true), - MULTI_EXT_CFG_BOOL("zihintpause", ext_zihintpause, true), - MULTI_EXT_CFG_BOOL("zimop", ext_zimop, false), - MULTI_EXT_CFG_BOOL("zcmop", ext_zcmop, false), - MULTI_EXT_CFG_BOOL("zacas", ext_zacas, false), - MULTI_EXT_CFG_BOOL("zama16b", ext_zama16b, false), - MULTI_EXT_CFG_BOOL("zabha", ext_zabha, false), - MULTI_EXT_CFG_BOOL("zaamo", ext_zaamo, false), - MULTI_EXT_CFG_BOOL("zalasr", ext_zalasr, false), - MULTI_EXT_CFG_BOOL("zalrsc", ext_zalrsc, false), - MULTI_EXT_CFG_BOOL("zawrs", ext_zawrs, true), - MULTI_EXT_CFG_BOOL("zfa", ext_zfa, true), - MULTI_EXT_CFG_BOOL("zfbfmin", ext_zfbfmin, false), - MULTI_EXT_CFG_BOOL("zfh", ext_zfh, false), - MULTI_EXT_CFG_BOOL("zfhmin", ext_zfhmin, false), - MULTI_EXT_CFG_BOOL("zve32f", ext_zve32f, false), - MULTI_EXT_CFG_BOOL("zve32x", ext_zve32x, false), - MULTI_EXT_CFG_BOOL("zve64f", ext_zve64f, false), - MULTI_EXT_CFG_BOOL("zve64d", ext_zve64d, false), - MULTI_EXT_CFG_BOOL("zve64x", ext_zve64x, false), - MULTI_EXT_CFG_BOOL("zvfbfa", ext_zvfbfa, false), - MULTI_EXT_CFG_BOOL("zvfbfmin", ext_zvfbfmin, false), - MULTI_EXT_CFG_BOOL("zvfbfwma", ext_zvfbfwma, false), - MULTI_EXT_CFG_BOOL("zvfh", ext_zvfh, false), - MULTI_EXT_CFG_BOOL("zvfhmin", ext_zvfhmin, false), - MULTI_EXT_CFG_BOOL("sstc", ext_sstc, true), - MULTI_EXT_CFG_BOOL("ssnpm", ext_ssnpm, false), - MULTI_EXT_CFG_BOOL("sspm", ext_sspm, false), - MULTI_EXT_CFG_BOOL("supm", ext_supm, false), - - MULTI_EXT_CFG_BOOL("smaia", ext_smaia, false), - MULTI_EXT_CFG_BOOL("smdbltrp", ext_smdbltrp, false), - MULTI_EXT_CFG_BOOL("smepmp", ext_smepmp, false), - MULTI_EXT_CFG_BOOL("smpmpmt", ext_smpmpmt, false), - MULTI_EXT_CFG_BOOL("smrnmi", ext_smrnmi, false), - MULTI_EXT_CFG_BOOL("smmpm", ext_smmpm, false), - MULTI_EXT_CFG_BOOL("smnpm", ext_smnpm, false), - MULTI_EXT_CFG_BOOL("smstateen", ext_smstateen, false), - MULTI_EXT_CFG_BOOL("ssaia", ext_ssaia, false), - MULTI_EXT_CFG_BOOL("ssdbltrp", ext_ssdbltrp, false), - MULTI_EXT_CFG_BOOL("svade", ext_svade, false), - MULTI_EXT_CFG_BOOL("svadu", ext_svadu, true), - MULTI_EXT_CFG_BOOL("svinval", ext_svinval, false), - MULTI_EXT_CFG_BOOL("svnapot", ext_svnapot, false), - MULTI_EXT_CFG_BOOL("svpbmt", ext_svpbmt, false), - MULTI_EXT_CFG_BOOL("svrsw60t59b", ext_svrsw60t59b, false), - MULTI_EXT_CFG_BOOL("svvptc", ext_svvptc, true), - - MULTI_EXT_CFG_BOOL("zicntr", ext_zicntr, true), - MULTI_EXT_CFG_BOOL("zihpm", ext_zihpm, true), - MULTI_EXT_CFG_BOOL("zilsd", ext_zilsd, false), - - MULTI_EXT_CFG_BOOL("zba", ext_zba, true), - MULTI_EXT_CFG_BOOL("zbb", ext_zbb, true), - MULTI_EXT_CFG_BOOL("zbc", ext_zbc, true), - MULTI_EXT_CFG_BOOL("zbkb", ext_zbkb, false), - MULTI_EXT_CFG_BOOL("zbkc", ext_zbkc, false), - MULTI_EXT_CFG_BOOL("zbkx", ext_zbkx, false), - MULTI_EXT_CFG_BOOL("zbs", ext_zbs, true), - MULTI_EXT_CFG_BOOL("zk", ext_zk, false), - MULTI_EXT_CFG_BOOL("zkn", ext_zkn, false), - MULTI_EXT_CFG_BOOL("zknd", ext_zknd, false), - MULTI_EXT_CFG_BOOL("zkne", ext_zkne, false), - MULTI_EXT_CFG_BOOL("zknh", ext_zknh, false), - MULTI_EXT_CFG_BOOL("zkr", ext_zkr, false), - MULTI_EXT_CFG_BOOL("zks", ext_zks, false), - MULTI_EXT_CFG_BOOL("zksed", ext_zksed, false), - MULTI_EXT_CFG_BOOL("zksh", ext_zksh, false), - MULTI_EXT_CFG_BOOL("zkt", ext_zkt, false), - MULTI_EXT_CFG_BOOL("ztso", ext_ztso, false), - - MULTI_EXT_CFG_BOOL("zdinx", ext_zdinx, false), - MULTI_EXT_CFG_BOOL("zfinx", ext_zfinx, false), - MULTI_EXT_CFG_BOOL("zhinx", ext_zhinx, false), - MULTI_EXT_CFG_BOOL("zhinxmin", ext_zhinxmin, false), - - MULTI_EXT_CFG_BOOL("zicbom", ext_zicbom, true), - MULTI_EXT_CFG_BOOL("zicbop", ext_zicbop, true), - MULTI_EXT_CFG_BOOL("zicboz", ext_zicboz, true), - - MULTI_EXT_CFG_BOOL("zmmul", ext_zmmul, false), - - MULTI_EXT_CFG_BOOL("zca", ext_zca, false), - MULTI_EXT_CFG_BOOL("zcb", ext_zcb, false), - MULTI_EXT_CFG_BOOL("zcd", ext_zcd, false), - MULTI_EXT_CFG_BOOL("zce", ext_zce, false), - MULTI_EXT_CFG_BOOL("zcf", ext_zcf, false), - MULTI_EXT_CFG_BOOL("zcmp", ext_zcmp, false), - MULTI_EXT_CFG_BOOL("zcmt", ext_zcmt, false), - MULTI_EXT_CFG_BOOL("zicond", ext_zicond, false), - MULTI_EXT_CFG_BOOL("zclsd", ext_zclsd, false), - - /* Vector cryptography extensions */ - MULTI_EXT_CFG_BOOL("zvbb", ext_zvbb, false), - MULTI_EXT_CFG_BOOL("zvbc", ext_zvbc, false), - MULTI_EXT_CFG_BOOL("zvkb", ext_zvkb, false), - MULTI_EXT_CFG_BOOL("zvkg", ext_zvkg, false), - MULTI_EXT_CFG_BOOL("zvkned", ext_zvkned, false), - MULTI_EXT_CFG_BOOL("zvknha", ext_zvknha, false), - MULTI_EXT_CFG_BOOL("zvknhb", ext_zvknhb, false), - MULTI_EXT_CFG_BOOL("zvksed", ext_zvksed, false), - MULTI_EXT_CFG_BOOL("zvksh", ext_zvksh, false), - MULTI_EXT_CFG_BOOL("zvkt", ext_zvkt, false), - MULTI_EXT_CFG_BOOL("zvkn", ext_zvkn, false), - MULTI_EXT_CFG_BOOL("zvknc", ext_zvknc, false), - MULTI_EXT_CFG_BOOL("zvkng", ext_zvkng, false), - MULTI_EXT_CFG_BOOL("zvks", ext_zvks, false), - MULTI_EXT_CFG_BOOL("zvksc", ext_zvksc, false), - MULTI_EXT_CFG_BOOL("zvksg", ext_zvksg, false), - - { }, -}; - -const RISCVCPUMultiExtConfig riscv_cpu_vendor_exts[] = { - MULTI_EXT_CFG_BOOL("xtheadba", ext_xtheadba, false), - MULTI_EXT_CFG_BOOL("xtheadbb", ext_xtheadbb, false), - MULTI_EXT_CFG_BOOL("xtheadbs", ext_xtheadbs, false), - MULTI_EXT_CFG_BOOL("xtheadcmo", ext_xtheadcmo, false), - MULTI_EXT_CFG_BOOL("xtheadcondmov", ext_xtheadcondmov, false), - MULTI_EXT_CFG_BOOL("xtheadfmemidx", ext_xtheadfmemidx, false), - MULTI_EXT_CFG_BOOL("xtheadfmv", ext_xtheadfmv, false), - MULTI_EXT_CFG_BOOL("xtheadmac", ext_xtheadmac, false), - MULTI_EXT_CFG_BOOL("xtheadmemidx", ext_xtheadmemidx, false), - MULTI_EXT_CFG_BOOL("xtheadmempair", ext_xtheadmempair, false), - MULTI_EXT_CFG_BOOL("xtheadsync", ext_xtheadsync, false), - MULTI_EXT_CFG_BOOL("xventanacondops", ext_XVentanaCondOps, false), - MULTI_EXT_CFG_BOOL("xmipscbop", ext_xmipscbop, false), - MULTI_EXT_CFG_BOOL("xmipscmov", ext_xmipscmov, false), - MULTI_EXT_CFG_BOOL("xmipslsp", ext_xmipslsp, false), - MULTI_EXT_CFG_BOOL("xlrbr", ext_xlrbr, false), - - { }, -}; - -/* These are experimental so mark with 'x-' */ -const RISCVCPUMultiExtConfig riscv_cpu_experimental_exts[] = { - MULTI_EXT_CFG_BOOL("x-svukte", ext_svukte, false), - - { }, -}; - static void cpu_set_prop_err(RISCVCPU *cpu, const char *propname, Error **errp) { -- 2.53.0 From: Fangyu Yu <fangyu.yu@linux.alibaba.com> Fix IOCOUNTINH.CY toggle detection by comparing normalized CY bit rather than XORing whole register with boolean. Fixes: 2cf2a6c027ba ("hw/riscv/riscv-iommu: add IOCOUNTINH mmio writes") Signed-off-by: Fangyu Yu <fangyu.yu@linux.alibaba.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Nutty Liu <nutty.liu@hotmail.com> Message-ID: <20260509074941.99295-1-fangyu.yu@linux.alibaba.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu-hpm.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/riscv/riscv-iommu-hpm.c b/hw/riscv/riscv-iommu-hpm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu-hpm.c +++ b/hw/riscv/riscv-iommu-hpm.c @@ -XXX,XX +XXX,XX @@ void riscv_iommu_process_iocntinh_cy(RISCVIOMMUState *s, bool prev_cy_inh) s, RISCV_IOMMU_REG_IOCOUNTINH); /* We only need to process CY bit toggle. */ - if (!(inhibit ^ prev_cy_inh)) { + bool cy_inh = !!(inhibit & RISCV_IOMMU_IOCOUNTINH_CY); + if (cy_inh == prev_cy_inh) { return; } -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> The priv spec defines, for RV64, that the upper 10 bits of pmpaddr0-pmpaddr63 are WARL and are supposed to be cleared. After this patch, using the bug reproducer in [1], writing ffffffffffffffff in pmpaddr0 and reading it back now results in 003fffffffffffff. Here's the 'diff -cp' dump before and after this change: *************** IN: *** 5272,5278 **** pmpcfg10 0000000000000000 pmpcfg12 0000000000000000 pmpcfg14 0000000000000000 ! pmpaddr0 ffffffffffffffff pmpaddr1 0000000000000000 pmpaddr2 0000000000000000 pmpaddr3 0000000000000000 Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260514123342.2139464-1-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException read_pmpaddr(CPURISCVState *env, int csrno, target_ulong *val) { *val = pmpaddr_csr_read(env, csrno - CSR_PMPADDR0); + + /* + * For RV64, bits 54-63 of the address registers + * PMPAADDR(0-63) is a WARL zero field (priv spec, + * section "Physical Memory Protection CSRs"). + * + * We'll have to add an annoying TARGET_RISCV64 gate + * here to avoid complaints about masking bits 0-53 + * of a potential 32 bit target_ulong '*var'. + */ +#ifdef TARGET_RISCV64 + if (env->misa_mxl == MXL_RV64 + && csrno >= CSR_PMPADDR0 && csrno <= CSR_PMPADDR63) { + target_ulong read_mask = MAKE_64BIT_MASK(0, 54); + *val &= read_mask; + } +#endif return RISCV_EXCP_NONE; } -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> In build_rimt(), the calculation of `num_ids` for the ID mapping array incorrectly uses the same formula (`0xffff - s->pci_iommu_bdf`) for both System IOMMU and PCI IOMMU topologies. For a System IOMMU, `s->pci_iommu_bdf` is 0. This results in a `num_ids` value of 0xffff. Since the source ID base starts at 0, the mapping only covers Requester IDs from 0 to 0xfffe. The final valid PCI Requester ID (0xffff) is erroneously omitted from the RIMT table. Fix this by decoupling the `num_ids` calculation. For System IOMMUs, explicitly set `num_ids` to 0x10000 to cover the entire PCI Requester ID space. This issue was discovered and reported by SpecHunter, an AI-driven architecture specification analysis tool. Link: https://github.com/yizishun/rv-isa-sec/blob/c78dacf66c8acd677b3538c837fde310bb71a97b/output/riscv-server-platform/pr-102/qemu.txt#L32 Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512062310.348208-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt-acpi-build.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/riscv/virt-acpi-build.c b/hw/riscv/virt-acpi-build.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt-acpi-build.c +++ b/hw/riscv/virt-acpi-build.c @@ -XXX,XX +XXX,XX @@ static void build_rimt(GArray *table_data, BIOSLinker *linker, range = &g_array_index(iommu_idmaps, AcpiRimtIdMapping, i); if (virt_is_iommu_sys_enabled(s)) { range->source_id_base = 0; + range->num_ids = 0x10000; } else { range->source_id_base = s->pci_iommu_bdf + 1; + range->num_ids = 0xffff - s->pci_iommu_bdf; } - range->num_ids = 0xffff - s->pci_iommu_bdf; build_rimt_id_mapping(table_data, range->source_id_base, range->num_ids, iommu_offset); } -- 2.53.0 From: Portia Stephens <portias@oss.tenstorrent.com> The counter value was not being bitshifted for a hpmcounterh read resulting in hpmcounterh returning the bottom 32-bits. Fixes: cfc96df65e01 ("target/riscv: Remove upper_half from riscv_pmu_ctr_get_fixed_counters_val") Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3498 Cc: qemu-stable@nongnu.org Signed-off-by: Portia Stephens <portias@oss.tenstorrent.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260519043352.3685866-1-stephensportia@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ RISCVException riscv_pmu_read_ctr(CPURISCVState *env, target_ulong *val, */ if (riscv_pmu_ctr_monitor_cycles(env, ctr_idx) || riscv_pmu_ctr_monitor_instructions(env, ctr_idx)) { - *val = riscv_pmu_ctr_get_fixed_counters_val(env, ctr_idx) - - ctr_prev + ctr_val; + uint64_t cntr = riscv_pmu_ctr_get_fixed_counters_val(env, ctr_idx) - + ctr_prev + ctr_val; + *val = extract64(cntr, start, length); } else { *val = ctr_val; } -- 2.53.0 From: Jim Shu <jim.shu@sifive.com> According to the AIA spec ch4.7 ("Precise effects on interrupt-pending bits"), pending bit of APLIC should be set/cleared whenever the rectified input value is high/low in the both level-trigger mode and direct delivery mode. Currently, QEMU APLIC only clears the pending bit when interrupt is claimed in APLIC, but not clears it when the rectified input value is low. (e.g. IRQ source signal is low in the LEVEL_HIGH/Level1 mode). The software may receive an additional IRQ if the peripheral triggers one after the software clears the APLIC IRQ but before it clears the peripheral's IRQ. Thus, we also clear the pending bit via the rectified input value in the level-trigger mode. This change doesn't affect MSI delivery mode. Calling riscv_aplic_msi_irq_update() when IRQ pending is low will do nothing. Signed-off-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Chao Liu <chao.liu.zevorn@gmail.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260428160103.3551125-2-jim.shu@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/intc/riscv_aplic.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/hw/intc/riscv_aplic.c b/hw/intc/riscv_aplic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/riscv_aplic.c +++ b/hw/intc/riscv_aplic.c @@ -XXX,XX +XXX,XX @@ static void riscv_aplic_request(void *opaque, int irq, int level) } break; case APLIC_SOURCECFG_SM_LEVEL_HIGH: - if ((level > 0) && !(state & APLIC_ISTATE_PENDING)) { - riscv_aplic_set_pending_raw(aplic, irq, true); + if ((level > 0) != !!(state & APLIC_ISTATE_PENDING)) { + riscv_aplic_set_pending_raw(aplic, irq, level > 0); update = true; } break; case APLIC_SOURCECFG_SM_LEVEL_LOW: - if ((level <= 0) && !(state & APLIC_ISTATE_PENDING)) { - riscv_aplic_set_pending_raw(aplic, irq, true); + if ((level <= 0) != !!(state & APLIC_ISTATE_PENDING)) { + riscv_aplic_set_pending_raw(aplic, irq, level <= 0); update = true; } break; -- 2.53.0 From: Jim Shu <jim.shu@sifive.com> Clearing APLIC registers and qemu_irq in the reset function Signed-off-by: Jim Shu <jim.shu@sifive.com> Signed-off-by: Fea.Wang <fea.wang@sifive.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260428160103.3551125-3-jim.shu@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/intc/riscv_aplic.c | 45 ++++++++++++++++++++++++++++++++++++++----- 1 file changed, 40 insertions(+), 5 deletions(-) diff --git a/hw/intc/riscv_aplic.c b/hw/intc/riscv_aplic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/riscv_aplic.c +++ b/hw/intc/riscv_aplic.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps riscv_aplic_ops = { } }; +static void riscv_aplic_reset_enter(Object *obj, ResetType type) +{ + RISCVAPLICState *aplic = RISCV_APLIC(obj); + int i; + + aplic->domaincfg = 0; + memset(aplic->sourcecfg, 0, sizeof(uint32_t) * aplic->num_irqs); + memset(aplic->target, 0, sizeof(uint32_t) * aplic->num_irqs); + if (!aplic->msimode) { + for (i = 0; i < aplic->num_irqs; i++) { + aplic->target[i] = 1; + } + } + + for (i = 0; i < aplic->num_irqs ; i++) { + riscv_aplic_set_enabled_raw(aplic, i, false); + } + + /* Need to unlock [ms]msicfgaddrh.L */ + aplic->mmsicfgaddr = 0; + aplic->mmsicfgaddrH = 0; + aplic->smsicfgaddr = 0; + aplic->smsicfgaddrH = 0; + + if (!aplic->msimode) { + /* Reset IDC registers only in non-MSI mode */ + for (i = 0; i < aplic->num_harts; i++) { + aplic->idelivery[i] = 0; + aplic->iforce[i] = 0; + aplic->ithreshold[i] = 0; + } + + for (i = 0; i < aplic->num_harts; i++) { + qemu_irq_lower(aplic->external_irqs[i]); + } + } +} + static void riscv_aplic_realize(DeviceState *dev, Error **errp) { uint32_t i; @@ -XXX,XX +XXX,XX @@ static void riscv_aplic_realize(DeviceState *dev, Error **errp) aplic->sourcecfg = g_new0(uint32_t, aplic->num_irqs); aplic->state = g_new0(uint32_t, aplic->num_irqs); aplic->target = g_new0(uint32_t, aplic->num_irqs); - if (!aplic->msimode) { - for (i = 0; i < aplic->num_irqs; i++) { - aplic->target[i] = 1; - } - } aplic->idelivery = g_new0(uint32_t, aplic->num_harts); aplic->iforce = g_new0(uint32_t, aplic->num_harts); aplic->ithreshold = g_new0(uint32_t, aplic->num_harts); @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_riscv_aplic = { static void riscv_aplic_class_init(ObjectClass *klass, const void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); device_class_set_props(dc, riscv_aplic_properties); dc->realize = riscv_aplic_realize; + rc->phases.enter = riscv_aplic_reset_enter; dc->vmsd = &vmstate_riscv_aplic; } -- 2.53.0 From: Jim Shu <jim.shu@sifive.com> Clearing IMSIC registers and qemu_irq in the reset function Signed-off-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260428160103.3551125-4-jim.shu@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/intc/riscv_imsic.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/hw/intc/riscv_imsic.c b/hw/intc/riscv_imsic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/riscv_imsic.c +++ b/hw/intc/riscv_imsic.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps riscv_imsic_ops = { } }; +static void riscv_imsic_reset_enter(Object *obj, ResetType type) +{ + RISCVIMSICState *imsic = RISCV_IMSIC(obj); + int i; + + memset(imsic->eidelivery, 0, sizeof(uint32_t) * imsic->num_pages); + memset(imsic->eithreshold, 0, sizeof(uint32_t) * imsic->num_pages); + + for (i = 0; i < imsic->num_eistate; i++) { + imsic->eistate[i] &= ~IMSIC_EISTATE_ENABLED; + } + + for (i = 0; i < imsic->num_pages; i++) { + qemu_irq_lower(imsic->external_irqs[i]); + } +} + static void riscv_imsic_realize(DeviceState *dev, Error **errp) { RISCVIMSICState *imsic = RISCV_IMSIC(dev); @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_riscv_imsic = { static void riscv_imsic_class_init(ObjectClass *klass, const void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); device_class_set_props(dc, riscv_imsic_properties); dc->realize = riscv_imsic_realize; + rc->phases.enter = riscv_imsic_reset_enter; dc->vmsd = &vmstate_riscv_imsic; } -- 2.53.0 From: Jim Shu <jim.shu@sifive.com> Add the trace events for APLIC read/write functions. Signed-off-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260428160103.3551125-5-jim.shu@sifive.com> [ Changes by AF: - Init val to zero to avoid uninitialised build errors ] Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/intc/riscv_aplic.c | 63 ++++++++++++++++++++++++++----------------- hw/intc/trace-events | 4 +++ 2 files changed, 42 insertions(+), 25 deletions(-) diff --git a/hw/intc/riscv_aplic.c b/hw/intc/riscv_aplic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/riscv_aplic.c +++ b/hw/intc/riscv_aplic.c @@ -XXX,XX +XXX,XX @@ #include "system/tcg.h" #include "kvm/kvm_riscv.h" #include "migration/vmstate.h" +#include "trace.h" #define APLIC_MAX_IDC (1UL << 14) #define APLIC_MAX_SOURCE 1024 @@ -XXX,XX +XXX,XX @@ static void riscv_aplic_request(void *opaque, int irq, int level) static uint64_t riscv_aplic_read(void *opaque, hwaddr addr, unsigned size) { uint32_t irq, word, idc; + uint64_t val = 0; RISCVAPLICState *aplic = opaque; /* Reads must be 4 byte words */ @@ -XXX,XX +XXX,XX @@ static uint64_t riscv_aplic_read(void *opaque, hwaddr addr, unsigned size) } if (addr == APLIC_DOMAINCFG) { - return APLIC_DOMAINCFG_RDONLY | aplic->domaincfg | - (aplic->msimode ? APLIC_DOMAINCFG_DM : 0); + val = APLIC_DOMAINCFG_RDONLY | aplic->domaincfg | + (aplic->msimode ? APLIC_DOMAINCFG_DM : 0); } else if ((APLIC_SOURCECFG_BASE <= addr) && (addr < (APLIC_SOURCECFG_BASE + (aplic->num_irqs - 1) * 4))) { irq = ((addr - APLIC_SOURCECFG_BASE) >> 2) + 1; - return aplic->sourcecfg[irq]; + val = aplic->sourcecfg[irq]; } else if (aplic->mmode && aplic->msimode && (addr == APLIC_MMSICFGADDR)) { - return aplic->mmsicfgaddr; + val = aplic->mmsicfgaddr; } else if (aplic->mmode && aplic->msimode && (addr == APLIC_MMSICFGADDRH)) { - return aplic->mmsicfgaddrH; + val = aplic->mmsicfgaddrH; } else if (aplic->mmode && aplic->msimode && (addr == APLIC_SMSICFGADDR)) { /* @@ -XXX,XX +XXX,XX @@ static uint64_t riscv_aplic_read(void *opaque, hwaddr addr, unsigned size) * only zero in at least one of the supervisor-level child * domains). */ - return (aplic->num_children) ? aplic->smsicfgaddr : 0; + val = (aplic->num_children) ? aplic->smsicfgaddr : 0; } else if (aplic->mmode && aplic->msimode && (addr == APLIC_SMSICFGADDRH)) { - return (aplic->num_children) ? aplic->smsicfgaddrH : 0; + val = (aplic->num_children) ? aplic->smsicfgaddrH : 0; } else if ((APLIC_SETIP_BASE <= addr) && (addr < (APLIC_SETIP_BASE + aplic->bitfield_words * 4))) { word = (addr - APLIC_SETIP_BASE) >> 2; - return riscv_aplic_read_pending_word(aplic, word); + val = riscv_aplic_read_pending_word(aplic, word); } else if (addr == APLIC_SETIPNUM) { - return 0; + val = 0; } else if ((APLIC_CLRIP_BASE <= addr) && (addr < (APLIC_CLRIP_BASE + aplic->bitfield_words * 4))) { word = (addr - APLIC_CLRIP_BASE) >> 2; - return riscv_aplic_read_input_word(aplic, word); + val = riscv_aplic_read_input_word(aplic, word); } else if (addr == APLIC_CLRIPNUM) { - return 0; + val = 0; } else if ((APLIC_SETIE_BASE <= addr) && (addr < (APLIC_SETIE_BASE + aplic->bitfield_words * 4))) { word = (addr - APLIC_SETIE_BASE) >> 2; - return riscv_aplic_read_enabled_word(aplic, word); + val = riscv_aplic_read_enabled_word(aplic, word); } else if (addr == APLIC_SETIENUM) { - return 0; + val = 0; } else if ((APLIC_CLRIE_BASE <= addr) && (addr < (APLIC_CLRIE_BASE + aplic->bitfield_words * 4))) { - return 0; + val = 0; } else if (addr == APLIC_CLRIENUM) { - return 0; + val = 0; } else if (addr == APLIC_SETIPNUM_LE) { - return 0; + val = 0; } else if (addr == APLIC_SETIPNUM_BE) { - return 0; + val = 0; } else if (addr == APLIC_GENMSI) { - return (aplic->msimode) ? aplic->genmsi : 0; + val = (aplic->msimode) ? aplic->genmsi : 0; } else if ((APLIC_TARGET_BASE <= addr) && (addr < (APLIC_TARGET_BASE + (aplic->num_irqs - 1) * 4))) { irq = ((addr - APLIC_TARGET_BASE) >> 2) + 1; if (!riscv_aplic_source_active(aplic, irq)) { - return 0; + val = 0; + } else { + val = aplic->target[irq]; } - return aplic->target[irq]; } else if (!aplic->msimode && (APLIC_IDC_BASE <= addr) && (addr < (APLIC_IDC_BASE + aplic->num_harts * APLIC_IDC_SIZE))) { idc = (addr - APLIC_IDC_BASE) / APLIC_IDC_SIZE; switch (addr - (APLIC_IDC_BASE + idc * APLIC_IDC_SIZE)) { case APLIC_IDC_IDELIVERY: - return aplic->idelivery[idc]; + val = aplic->idelivery[idc]; + break; case APLIC_IDC_IFORCE: - return aplic->iforce[idc]; + val = aplic->iforce[idc]; + break; case APLIC_IDC_ITHRESHOLD: - return aplic->ithreshold[idc]; + val = aplic->ithreshold[idc]; + break; case APLIC_IDC_TOPI: - return riscv_aplic_idc_topi(aplic, idc); + val = riscv_aplic_idc_topi(aplic, idc); + break; case APLIC_IDC_CLAIMI: - return riscv_aplic_idc_claimi(aplic, idc); + val = riscv_aplic_idc_claimi(aplic, idc); + break; default: goto err; }; } + trace_riscv_aplic_read(addr, size, val); + return val; + err: qemu_log_mask(LOG_GUEST_ERROR, "%s: Invalid register read 0x%" HWADDR_PRIx "\n", @@ -XXX,XX +XXX,XX @@ static void riscv_aplic_write(void *opaque, hwaddr addr, uint64_t value, goto err; } + trace_riscv_aplic_write(addr, size, value); + if (addr == APLIC_DOMAINCFG) { /* Only IE bit writable at the moment */ value &= APLIC_DOMAINCFG_IE; diff --git a/hw/intc/trace-events b/hw/intc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/trace-events +++ b/hw/intc/trace-events @@ -XXX,XX +XXX,XX @@ loongarch_msi_set_irq(int irq_num) "set msi irq %d" loongarch_extioi_setirq(int irq, int level) "set extirq irq %d level %d" loongarch_extioi_readw(uint64_t addr, uint64_t val) "addr: 0x%"PRIx64 "val: 0x%" PRIx64 loongarch_extioi_writew(uint64_t addr, uint64_t val) "addr: 0x%"PRIx64 "val: 0x%" PRIx64 + +# riscv_aplic.c +riscv_aplic_read(uint64_t offset, unsigned size, uint64_t value) "offset: 0x%" PRIx64 ", size: %u, value: 0x%" PRIx64 +riscv_aplic_write(uint64_t offset, unsigned size, uint64_t value) "offset: 0x%" PRIx64 ", size: %u, value: 0x%" PRIx64 -- 2.53.0 From: Jay Chang <jay.chang@sifive.com> When software clears CMD_ILL or CQMF error bits by writing 1 to CQCSR, the IOMMU should re-check the command queue and continue processing pending commands if head != tail. Per RISC-V IOMMU specification : If command-queue access leads to a memory fault then the command-queue-memory-fault bit is set to 1 and the commandqueue stalls until this bit is cleared. To re-enable command processing, software should clear this bit by writing 1. Signed-off-by: Jay Chang <jay.chang@sifive.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Nutty Liu <nutty.liu@hotmail.com> Message-ID: <20260518070143.8405-1-jay.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/hw/riscv/riscv-iommu.c b/hw/riscv/riscv-iommu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.c +++ b/hw/riscv/riscv-iommu.c @@ -XXX,XX +XXX,XX @@ static void riscv_iommu_process_cq_control(RISCVIOMMUState *s) } riscv_iommu_reg_mod32(s, RISCV_IOMMU_REG_CQCSR, ctrl_set, ctrl_clr); + + /* + * After clearing error bits (CMD_ILL, CQMF), if queue is still active, + * re-process pending command. + */ + ctrl_set = riscv_iommu_reg_get32(s, RISCV_IOMMU_REG_CQCSR); + if ((ctrl_set & RISCV_IOMMU_CQCSR_CQON) && + !(ctrl_set & (RISCV_IOMMU_CQCSR_CMD_ILL | RISCV_IOMMU_CQCSR_CQMF))) { + riscv_iommu_process_cq_tail(s); + } } static void riscv_iommu_process_fq_control(RISCVIOMMUState *s) -- 2.53.0