The following changes since commit ad10b4badc1dd5b28305f9b9f1168cf0aa3ae946: Merge tag 'pull-error-2024-05-27' of https://repo.or.cz/qemu/armbru into staging (2024-05-27 06:40:42 -0700) are available in the Git repository at: https://github.com/alistair23/qemu.git tags/pull-riscv-to-apply-20240528 for you to fetch changes up to 1806da76cb81088ea026ca3441551782b850e393: target/riscv: raise an exception when CSRRS/CSRRC writes a read-only CSR (2024-05-28 12:20:27 +1000) ---------------------------------------------------------------- RISC-V PR for 9.1 * APLICs add child earlier than realize * Fix exposure of Zkr * Raise exceptions on wrs.nto * Implement SBI debug console (DBCN) calls for KVM * Support 64-bit addresses for initrd * Change RISCV_EXCP_SEMIHOST exception number to 63 * Tolerate KVM disable ext errors * Set tval in breakpoints * Add support for Zve32x extension * Add support for Zve64x extension * Relax vector register check in RISCV gdbstub * Fix the element agnostic Vector function problem * Fix Zvkb extension config * Implement dynamic establishment of custom decoder * Add th.sxstatus CSR emulation * Fix Zvfhmin checking for vfwcvt.f.f.v and vfncvt.f.f.w instructions * Check single width operator for vector fp widen instructions * Check single width operator for vfncvt.rod.f.f.w * Remove redudant SEW checking for vector fp narrow/widen instructions * Prioritize pmp errors in raise_mmu_exception() * Do not set mtval2 for non guest-page faults * Remove experimental prefix from "B" extension * Fixup CBO extension register calculation * Fix the hart bit setting of AIA * Fix reg_width in ricsv_gen_dynamic_vector_feature() * Decode all of the pmpcfg and pmpaddr CSRs * Raise an exception when CSRRS/CSRRC writes a read-only CSR ---------------------------------------------------------------- Alexei Filippov (1): target/riscv: do not set mtval2 for non guest-page faults Alistair Francis (2): target/riscv: rvzicbo: Fixup CBO extension register calculation disas/riscv: Decode all of the pmpcfg and pmpaddr CSRs Andrew Jones (2): target/riscv/kvm: Fix exposure of Zkr target/riscv: Raise exceptions on wrs.nto Cheng Yang (1): hw/riscv/boot.c: Support 64-bit address for initrd Christoph Müllner (1): riscv: thead: Add th.sxstatus CSR emulation Clément Léger (1): target/riscv: change RISCV_EXCP_SEMIHOST exception number to 63 Daniel Henrique Barboza (6): target/riscv/kvm: implement SBI debug console (DBCN) calls target/riscv/kvm: tolerate KVM disable ext errors target/riscv/debug: set tval=pc in breakpoint exceptions trans_privileged.c.inc: set (m|s)tval on ebreak breakpoint target/riscv: prioritize pmp errors in raise_mmu_exception() riscv, gdbstub.c: fix reg_width in ricsv_gen_dynamic_vector_feature() Huang Tao (2): target/riscv: Fix the element agnostic function problem target/riscv: Implement dynamic establishment of custom decoder Jason Chien (3): target/riscv: Add support for Zve32x extension target/riscv: Add support for Zve64x extension target/riscv: Relax vector register check in RISCV gdbstub Max Chou (4): target/riscv: rvv: Fix Zvfhmin checking for vfwcvt.f.f.v and vfncvt.f.f.w instructions target/riscv: rvv: Check single width operator for vector fp widen instructions target/riscv: rvv: Check single width operator for vfncvt.rod.f.f.w target/riscv: rvv: Remove redudant SEW checking for vector fp narrow/widen instructions Rob Bradford (1): target/riscv: Remove experimental prefix from "B" extension Yangyu Chen (1): target/riscv/cpu.c: fix Zvkb extension config Yong-Xuan Wang (1): target/riscv/kvm.c: Fix the hart bit setting of AIA Yu-Ming Chang (1): target/riscv: raise an exception when CSRRS/CSRRC writes a read-only CSR yang.zhang (1): hw/intc/riscv_aplic: APLICs should add child earlier than realize MAINTAINERS | 1 + target/riscv/cpu.h | 11 ++ target/riscv/cpu_bits.h | 2 +- target/riscv/cpu_cfg.h | 2 + target/riscv/helper.h | 1 + target/riscv/sbi_ecall_interface.h | 17 +++ target/riscv/tcg/tcg-cpu.h | 15 +++ disas/riscv.c | 65 +++++++++- hw/intc/riscv_aplic.c | 8 +- hw/riscv/boot.c | 4 +- target/riscv/cpu.c | 10 +- target/riscv/cpu_helper.c | 37 +++--- target/riscv/csr.c | 71 +++++++++-- target/riscv/debug.c | 3 + target/riscv/gdbstub.c | 8 +- target/riscv/kvm/kvm-cpu.c | 157 ++++++++++++++++++++++++- target/riscv/op_helper.c | 17 ++- target/riscv/tcg/tcg-cpu.c | 50 +++++--- target/riscv/th_csr.c | 79 +++++++++++++ target/riscv/translate.c | 31 +++-- target/riscv/vector_internals.c | 22 ++++ target/riscv/insn_trans/trans_privileged.c.inc | 2 + target/riscv/insn_trans/trans_rvv.c.inc | 46 +++++--- target/riscv/insn_trans/trans_rvzawrs.c.inc | 29 +++-- target/riscv/insn_trans/trans_rvzicbo.c.inc | 16 ++- target/riscv/meson.build | 1 + 26 files changed, 596 insertions(+), 109 deletions(-) create mode 100644 target/riscv/th_csr.c From: "yang.zhang" <yang.zhang@hexintek.com> Since only root APLICs can have hw IRQ lines, aplic->parent should be initialized first. Fixes: e8f79343cf ("hw/intc: Add RISC-V AIA APLIC device emulation") Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Signed-off-by: yang.zhang <yang.zhang@hexintek.com> Cc: qemu-stable <qemu-stable@nongnu.org> Message-ID: <20240409014445.278-1-gaoshanliukou@163.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/intc/riscv_aplic.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/hw/intc/riscv_aplic.c b/hw/intc/riscv_aplic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/riscv_aplic.c +++ b/hw/intc/riscv_aplic.c @@ -XXX,XX +XXX,XX @@ DeviceState *riscv_aplic_create(hwaddr addr, hwaddr size, qdev_prop_set_bit(dev, "msimode", msimode); qdev_prop_set_bit(dev, "mmode", mmode); + if (parent) { + riscv_aplic_add_child(parent, dev); + } + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); if (!is_kvm_aia(msimode)) { sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, addr); } - if (parent) { - riscv_aplic_add_child(parent, dev); - } - if (!msimode) { for (i = 0; i < num_harts; i++) { CPUState *cpu = cpu_by_arch_id(hartid_base + i); -- 2.45.1 From: Andrew Jones <ajones@ventanamicro.com> The Zkr extension may only be exposed to KVM guests if the VMM implements the SEED CSR. Use the same implementation as TCG. Without this patch, running with a KVM which does not forward the SEED CSR access to QEMU will result in an ILL exception being injected into the guest (this results in Linux guests crashing on boot). And, when running with a KVM which does forward the access, QEMU will crash, since QEMU doesn't know what to do with the exit. Fixes: 3108e2f1c69d ("target/riscv/kvm: update KVM exts to Linux 6.8") Signed-off-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Cc: qemu-stable <qemu-stable@nongnu.org> Message-ID: <20240422134605.534207-2-ajones@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 3 +++ target/riscv/csr.c | 18 ++++++++++++++---- target/riscv/kvm/kvm-cpu.c | 25 +++++++++++++++++++++++++ 3 files changed, 42 insertions(+), 4 deletions(-) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ void riscv_set_csr_ops(int csrno, riscv_csr_operations *ops); void riscv_cpu_register_gdb_regs_for_features(CPUState *cs); +target_ulong riscv_new_csr_seed(target_ulong new_value, + target_ulong write_mask); + uint8_t satp_mode_max_from_map(uint32_t map); const char *satp_mode_str(uint8_t satp_mode, bool is_32_bit); diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException write_upmbase(CPURISCVState *env, int csrno, #endif /* Crypto Extension */ -static RISCVException rmw_seed(CPURISCVState *env, int csrno, - target_ulong *ret_value, - target_ulong new_value, - target_ulong write_mask) +target_ulong riscv_new_csr_seed(target_ulong new_value, + target_ulong write_mask) { uint16_t random_v; Error *random_e = NULL; @@ -XXX,XX +XXX,XX @@ static RISCVException rmw_seed(CPURISCVState *env, int csrno, rval = random_v | SEED_OPST_ES16; } + return rval; +} + +static RISCVException rmw_seed(CPURISCVState *env, int csrno, + target_ulong *ret_value, + target_ulong new_value, + target_ulong write_mask) +{ + target_ulong rval; + + rval = riscv_new_csr_seed(new_value, write_mask); + if (ret_value) { *ret_value = rval; } diff --git a/target/riscv/kvm/kvm-cpu.c b/target/riscv/kvm/kvm-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/kvm/kvm-cpu.c +++ b/target/riscv/kvm/kvm-cpu.c @@ -XXX,XX +XXX,XX @@ static int kvm_riscv_handle_sbi(CPUState *cs, struct kvm_run *run) return ret; } +static int kvm_riscv_handle_csr(CPUState *cs, struct kvm_run *run) +{ + target_ulong csr_num = run->riscv_csr.csr_num; + target_ulong new_value = run->riscv_csr.new_value; + target_ulong write_mask = run->riscv_csr.write_mask; + int ret = 0; + + switch (csr_num) { + case CSR_SEED: + run->riscv_csr.ret_value = riscv_new_csr_seed(new_value, write_mask); + break; + default: + qemu_log_mask(LOG_UNIMP, + "%s: un-handled CSR EXIT for CSR %lx\n", + __func__, csr_num); + ret = -1; + break; + } + + return ret; +} + int kvm_arch_handle_exit(CPUState *cs, struct kvm_run *run) { int ret = 0; @@ -XXX,XX +XXX,XX @@ int kvm_arch_handle_exit(CPUState *cs, struct kvm_run *run) case KVM_EXIT_RISCV_SBI: ret = kvm_riscv_handle_sbi(cs, run); break; + case KVM_EXIT_RISCV_CSR: + ret = kvm_riscv_handle_csr(cs, run); + break; default: qemu_log_mask(LOG_UNIMP, "%s: un-handled exit reason %d\n", __func__, run->exit_reason); -- 2.45.1 From: Andrew Jones <ajones@ventanamicro.com> Implementing wrs.nto to always just return is consistent with the specification, as the instruction is permitted to terminate the stall for any reason, but it's not useful for virtualization, where we'd like the guest to trap to the hypervisor in order to allow scheduling of the lock holding VCPU. Change to always immediately raise exceptions when the appropriate conditions are present, otherwise continue to just return. Note, immediately raising exceptions is also consistent with the specification since the time limit that should expire prior to the exception is implementation-specific. Signed-off-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Christoph Müllner <christoph.muellner@vrull.eu> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240424142808.62936-2-ajones@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/helper.h | 1 + target/riscv/op_helper.c | 11 ++++++++ target/riscv/insn_trans/trans_rvzawrs.c.inc | 29 ++++++++++++++------- 3 files changed, 32 insertions(+), 9 deletions(-) diff --git a/target/riscv/helper.h b/target/riscv/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/helper.h +++ b/target/riscv/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_6(csrrw_i128, tl, env, int, tl, tl, tl, tl) DEF_HELPER_1(sret, tl, env) DEF_HELPER_1(mret, tl, env) DEF_HELPER_1(wfi, void, env) +DEF_HELPER_1(wrs_nto, void, env) DEF_HELPER_1(tlb_flush, void, env) DEF_HELPER_1(tlb_flush_all, void, env) /* Native Debug */ diff --git a/target/riscv/op_helper.c b/target/riscv/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/op_helper.c +++ b/target/riscv/op_helper.c @@ -XXX,XX +XXX,XX @@ void helper_wfi(CPURISCVState *env) } } +void helper_wrs_nto(CPURISCVState *env) +{ + if (env->virt_enabled && (env->priv == PRV_S || env->priv == PRV_U) && + get_field(env->hstatus, HSTATUS_VTW) && + !get_field(env->mstatus, MSTATUS_TW)) { + riscv_raise_exception(env, RISCV_EXCP_VIRT_INSTRUCTION_FAULT, GETPC()); + } else if (env->priv != PRV_M && get_field(env->mstatus, MSTATUS_TW)) { + riscv_raise_exception(env, RISCV_EXCP_ILLEGAL_INST, GETPC()); + } +} + void helper_tlb_flush(CPURISCVState *env) { CPUState *cs = env_cpu(env); diff --git a/target/riscv/insn_trans/trans_rvzawrs.c.inc b/target/riscv/insn_trans/trans_rvzawrs.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_rvzawrs.c.inc +++ b/target/riscv/insn_trans/trans_rvzawrs.c.inc @@ -XXX,XX +XXX,XX @@ * this program. If not, see <http://www.gnu.org/licenses/>. */ -static bool trans_wrs(DisasContext *ctx) +static bool trans_wrs_sto(DisasContext *ctx, arg_wrs_sto *a) { if (!ctx->cfg_ptr->ext_zawrs) { return false; @@ -XXX,XX +XXX,XX @@ static bool trans_wrs(DisasContext *ctx) return true; } -#define GEN_TRANS_WRS(insn) \ -static bool trans_ ## insn(DisasContext *ctx, arg_ ## insn *a) \ -{ \ - (void)a; \ - return trans_wrs(ctx); \ -} +static bool trans_wrs_nto(DisasContext *ctx, arg_wrs_nto *a) +{ + if (!ctx->cfg_ptr->ext_zawrs) { + return false; + } -GEN_TRANS_WRS(wrs_nto) -GEN_TRANS_WRS(wrs_sto) + /* + * Depending on the mode of execution, mstatus.TW and hstatus.VTW, wrs.nto + * should raise an exception when the implementation-specific bounded time + * limit has expired. Our time limit is zero, so we either return + * immediately, as does our implementation of wrs.sto, or raise an + * exception, as handled by the wrs.nto helper. + */ +#ifndef CONFIG_USER_ONLY + gen_helper_wrs_nto(tcg_env); +#endif + + /* We only get here when helper_wrs_nto() doesn't raise an exception. */ + return trans_wrs_sto(ctx, NULL); +} -- 2.45.1 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> SBI defines a Debug Console extension "DBCN" that will, in time, replace the legacy console putchar and getchar SBI extensions. The appeal of the DBCN extension is that it allows multiple bytes to be read/written in the SBI console in a single SBI call. As far as KVM goes, the DBCN calls are forwarded by an in-kernel KVM module to userspace. But this will only happens if the KVM module actually supports this SBI extension and we activate it. We'll check for DBCN support during init time, checking if get-reg-list is advertising KVM_RISCV_SBI_EXT_DBCN. In that case, we'll enable it via kvm_set_one_reg() during kvm_arch_init_vcpu(). Finally, change kvm_riscv_handle_sbi() to handle the incoming calls for SBI_EXT_DBCN, reading and writing as required. A simple KVM guest with 'earlycon=sbi', running in an emulated RISC-V host, takes around 20 seconds to boot without using DBCN. With this patch we're taking around 14 seconds to boot due to the speed-up in the terminal output. There's no change in boot time if the guest isn't using earlycon. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Message-ID: <20240425155012.581366-1-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/sbi_ecall_interface.h | 17 +++++ target/riscv/kvm/kvm-cpu.c | 111 +++++++++++++++++++++++++++++ 2 files changed, 128 insertions(+) diff --git a/target/riscv/sbi_ecall_interface.h b/target/riscv/sbi_ecall_interface.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/sbi_ecall_interface.h +++ b/target/riscv/sbi_ecall_interface.h @@ -XXX,XX +XXX,XX @@ /* clang-format off */ +#define SBI_SUCCESS 0 +#define SBI_ERR_FAILED -1 +#define SBI_ERR_NOT_SUPPORTED -2 +#define SBI_ERR_INVALID_PARAM -3 +#define SBI_ERR_DENIED -4 +#define SBI_ERR_INVALID_ADDRESS -5 +#define SBI_ERR_ALREADY_AVAILABLE -6 +#define SBI_ERR_ALREADY_STARTED -7 +#define SBI_ERR_ALREADY_STOPPED -8 +#define SBI_ERR_NO_SHMEM -9 + /* SBI Extension IDs */ #define SBI_EXT_0_1_SET_TIMER 0x0 #define SBI_EXT_0_1_CONSOLE_PUTCHAR 0x1 @@ -XXX,XX +XXX,XX @@ #define SBI_EXT_IPI 0x735049 #define SBI_EXT_RFENCE 0x52464E43 #define SBI_EXT_HSM 0x48534D +#define SBI_EXT_DBCN 0x4442434E /* SBI function IDs for BASE extension */ #define SBI_EXT_BASE_GET_SPEC_VERSION 0x0 @@ -XXX,XX +XXX,XX @@ #define SBI_EXT_HSM_HART_STOP 0x1 #define SBI_EXT_HSM_HART_GET_STATUS 0x2 +/* SBI function IDs for DBCN extension */ +#define SBI_EXT_DBCN_CONSOLE_WRITE 0x0 +#define SBI_EXT_DBCN_CONSOLE_READ 0x1 +#define SBI_EXT_DBCN_CONSOLE_WRITE_BYTE 0x2 + #define SBI_HSM_HART_STATUS_STARTED 0x0 #define SBI_HSM_HART_STATUS_STOPPED 0x1 #define SBI_HSM_HART_STATUS_START_PENDING 0x2 diff --git a/target/riscv/kvm/kvm-cpu.c b/target/riscv/kvm/kvm-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/kvm/kvm-cpu.c +++ b/target/riscv/kvm/kvm-cpu.c @@ -XXX,XX +XXX,XX @@ static KVMCPUConfig kvm_v_vlenb = { KVM_REG_RISCV_VECTOR_CSR_REG(vlenb) }; +static KVMCPUConfig kvm_sbi_dbcn = { + .name = "sbi_dbcn", + .kvm_reg_id = KVM_REG_RISCV | KVM_REG_SIZE_U64 | + KVM_REG_RISCV_SBI_EXT | KVM_RISCV_SBI_EXT_DBCN +}; + static void kvm_riscv_update_cpu_cfg_isa_ext(RISCVCPU *cpu, CPUState *cs) { CPURISCVState *env = &cpu->env; @@ -XXX,XX +XXX,XX @@ static int uint64_cmp(const void *a, const void *b) return 0; } +static void kvm_riscv_check_sbi_dbcn_support(RISCVCPU *cpu, + KVMScratchCPU *kvmcpu, + struct kvm_reg_list *reglist) +{ + struct kvm_reg_list *reg_search; + + reg_search = bsearch(&kvm_sbi_dbcn.kvm_reg_id, reglist->reg, reglist->n, + sizeof(uint64_t), uint64_cmp); + + if (reg_search) { + kvm_sbi_dbcn.supported = true; + } +} + static void kvm_riscv_read_vlenb(RISCVCPU *cpu, KVMScratchCPU *kvmcpu, struct kvm_reg_list *reglist) { @@ -XXX,XX +XXX,XX @@ static void kvm_riscv_init_multiext_cfg(RISCVCPU *cpu, KVMScratchCPU *kvmcpu) if (riscv_has_ext(&cpu->env, RVV)) { kvm_riscv_read_vlenb(cpu, kvmcpu, reglist); } + + kvm_riscv_check_sbi_dbcn_support(cpu, kvmcpu, reglist); } static void riscv_init_kvm_registers(Object *cpu_obj) @@ -XXX,XX +XXX,XX @@ static int kvm_vcpu_set_machine_ids(RISCVCPU *cpu, CPUState *cs) return ret; } +static int kvm_vcpu_enable_sbi_dbcn(RISCVCPU *cpu, CPUState *cs) +{ + target_ulong reg = 1; + + if (!kvm_sbi_dbcn.supported) { + return 0; + } + + return kvm_set_one_reg(cs, kvm_sbi_dbcn.kvm_reg_id, &reg); +} + int kvm_arch_init_vcpu(CPUState *cs) { int ret = 0; @@ -XXX,XX +XXX,XX @@ int kvm_arch_init_vcpu(CPUState *cs) kvm_riscv_update_cpu_misa_ext(cpu, cs); kvm_riscv_update_cpu_cfg_isa_ext(cpu, cs); + ret = kvm_vcpu_enable_sbi_dbcn(cpu, cs); + return ret; } @@ -XXX,XX +XXX,XX @@ bool kvm_arch_stop_on_emulation_error(CPUState *cs) return true; } +static void kvm_riscv_handle_sbi_dbcn(CPUState *cs, struct kvm_run *run) +{ + g_autofree uint8_t *buf = NULL; + RISCVCPU *cpu = RISCV_CPU(cs); + target_ulong num_bytes; + uint64_t addr; + unsigned char ch; + int ret; + + switch (run->riscv_sbi.function_id) { + case SBI_EXT_DBCN_CONSOLE_READ: + case SBI_EXT_DBCN_CONSOLE_WRITE: + num_bytes = run->riscv_sbi.args[0]; + + if (num_bytes == 0) { + run->riscv_sbi.ret[0] = SBI_SUCCESS; + run->riscv_sbi.ret[1] = 0; + break; + } + + addr = run->riscv_sbi.args[1]; + + /* + * Handle the case where a 32 bit CPU is running in a + * 64 bit addressing env. + */ + if (riscv_cpu_mxl(&cpu->env) == MXL_RV32) { + addr |= (uint64_t)run->riscv_sbi.args[2] << 32; + } + + buf = g_malloc0(num_bytes); + + if (run->riscv_sbi.function_id == SBI_EXT_DBCN_CONSOLE_READ) { + ret = qemu_chr_fe_read_all(serial_hd(0)->be, buf, num_bytes); + if (ret < 0) { + error_report("SBI_EXT_DBCN_CONSOLE_READ: error when " + "reading chardev"); + exit(1); + } + + cpu_physical_memory_write(addr, buf, ret); + } else { + cpu_physical_memory_read(addr, buf, num_bytes); + + ret = qemu_chr_fe_write_all(serial_hd(0)->be, buf, num_bytes); + if (ret < 0) { + error_report("SBI_EXT_DBCN_CONSOLE_WRITE: error when " + "writing chardev"); + exit(1); + } + } + + run->riscv_sbi.ret[0] = SBI_SUCCESS; + run->riscv_sbi.ret[1] = ret; + break; + case SBI_EXT_DBCN_CONSOLE_WRITE_BYTE: + ch = run->riscv_sbi.args[0]; + ret = qemu_chr_fe_write(serial_hd(0)->be, &ch, sizeof(ch)); + + if (ret < 0) { + error_report("SBI_EXT_DBCN_CONSOLE_WRITE_BYTE: error when " + "writing chardev"); + exit(1); + } + + run->riscv_sbi.ret[0] = SBI_SUCCESS; + run->riscv_sbi.ret[1] = 0; + break; + default: + run->riscv_sbi.ret[0] = SBI_ERR_NOT_SUPPORTED; + } +} + static int kvm_riscv_handle_sbi(CPUState *cs, struct kvm_run *run) { int ret = 0; @@ -XXX,XX +XXX,XX @@ static int kvm_riscv_handle_sbi(CPUState *cs, struct kvm_run *run) } ret = 0; break; + case SBI_EXT_DBCN: + kvm_riscv_handle_sbi_dbcn(cs, run); + break; default: qemu_log_mask(LOG_UNIMP, "%s: un-handled SBI EXIT, specific reasons is %lu\n", -- 2.45.1 From: Cheng Yang <yangcheng.work@foxmail.com> Use qemu_fdt_setprop_u64() instead of qemu_fdt_setprop_cell() to set the address of initrd in FDT to support 64-bit address. Signed-off-by: Cheng Yang <yangcheng.work@foxmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <tencent_A4482251DD0890F312758FA6B33F60815609@qq.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/boot.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/riscv/boot.c b/hw/riscv/boot.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/boot.c +++ b/hw/riscv/boot.c @@ -XXX,XX +XXX,XX @@ static void riscv_load_initrd(MachineState *machine, uint64_t kernel_entry) /* Some RISC-V machines (e.g. opentitan) don't have a fdt. */ if (fdt) { end = start + size; - qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-start", start); - qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-end", end); + qemu_fdt_setprop_u64(fdt, "/chosen", "linux,initrd-start", start); + qemu_fdt_setprop_u64(fdt, "/chosen", "linux,initrd-end", end); } } -- 2.45.1 From: Clément Léger <cleger@rivosinc.com> The current semihost exception number (16) is a reserved number (range [16-17]). The upcoming double trap specification uses that number for the double trap exception. Since the privileged spec (Table 22) defines ranges for custom uses change the semihosting exception number to 63 which belongs to the range [48-63] in order to avoid any future collisions with reserved exception. Signed-off-by: Clément Léger <cleger@rivosinc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240422135840.1959967-1-cleger@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu_bits.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/riscv/cpu_bits.h b/target/riscv/cpu_bits.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_bits.h +++ b/target/riscv/cpu_bits.h @@ -XXX,XX +XXX,XX @@ typedef enum RISCVException { RISCV_EXCP_INST_PAGE_FAULT = 0xc, /* since: priv-1.10.0 */ RISCV_EXCP_LOAD_PAGE_FAULT = 0xd, /* since: priv-1.10.0 */ RISCV_EXCP_STORE_PAGE_FAULT = 0xf, /* since: priv-1.10.0 */ - RISCV_EXCP_SEMIHOST = 0x10, RISCV_EXCP_INST_GUEST_PAGE_FAULT = 0x14, RISCV_EXCP_LOAD_GUEST_ACCESS_FAULT = 0x15, RISCV_EXCP_VIRT_INSTRUCTION_FAULT = 0x16, RISCV_EXCP_STORE_GUEST_AMO_ACCESS_FAULT = 0x17, + RISCV_EXCP_SEMIHOST = 0x3f, } RISCVException; #define RISCV_EXCP_INT_FLAG 0x80000000 -- 2.45.1 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Running a KVM guest using a 6.9-rc3 kernel, in a 6.8 host that has zkr enabled, will fail with a kernel oops SIGILL right at the start. The reason is that we can't expose zkr without implementing the SEED CSR. Disabling zkr in the guest would be a workaround, but if the KVM doesn't allow it we'll error out and never boot. In hindsight this is too strict. If we keep proceeding, despite not disabling the extension in the KVM vcpu, we'll not add the extension in the riscv,isa. The guest kernel will be unaware of the extension, i.e. it doesn't matter if the KVM vcpu has it enabled underneath or not. So it's ok to keep booting in this case. Change our current logic to not error out if we fail to disable an extension in kvm_set_one_reg(), but show a warning and keep booting. It is important to throw a warning because we must make the user aware that the extension is still available in the vcpu, meaning that an ill-behaved guest can ignore the riscv,isa settings and use the extension. The case we're handling happens with an EINVAL error code. If we fail to disable the extension in KVM for any other reason, error out. We'll also keep erroring out when we fail to enable an extension in KVM, since adding the extension in riscv,isa at this point will cause a guest malfunction because the extension isn't enabled in the vcpu. Suggested-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Cc: qemu-stable <qemu-stable@nongnu.org> Message-ID: <20240422171425.333037-2-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/kvm/kvm-cpu.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/target/riscv/kvm/kvm-cpu.c b/target/riscv/kvm/kvm-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/kvm/kvm-cpu.c +++ b/target/riscv/kvm/kvm-cpu.c @@ -XXX,XX +XXX,XX @@ static void kvm_riscv_update_cpu_cfg_isa_ext(RISCVCPU *cpu, CPUState *cs) reg = kvm_cpu_cfg_get(cpu, multi_ext_cfg); ret = kvm_set_one_reg(cs, id, &reg); if (ret != 0) { - error_report("Unable to %s extension %s in KVM, error %d", - reg ? "enable" : "disable", - multi_ext_cfg->name, ret); - exit(EXIT_FAILURE); + if (!reg && ret == -EINVAL) { + warn_report("KVM cannot disable extension %s", + multi_ext_cfg->name); + } else { + error_report("Unable to enable extension %s in KVM, error %d", + multi_ext_cfg->name, ret); + exit(EXIT_FAILURE); + } } } } -- 2.45.1 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> We're not setting (s/m)tval when triggering breakpoints of type 2 (mcontrol) and 6 (mcontrol6). According to the debug spec section 5.7.12, "Match Control Type 6": "The Privileged Spec says that breakpoint exceptions that occur on instruction fetches, loads, or stores update the tval CSR with either zero or the faulting virtual address. The faulting virtual address for an mcontrol6 trigger with action = 0 is the address being accessed and which caused that trigger to fire." A similar text is also found in the Debug spec section 5.7.11 w.r.t. mcontrol. Note that what we're doing ATM is not violating the spec, but it's simple enough to set mtval/stval and it makes life easier for any software that relies on this info. Given that we always use action = 0, save the faulting address for the mcontrol and mcontrol6 trigger breakpoints into env->badaddr, which is used as as scratch area for traps with address information. 'tval' is then set during riscv_cpu_do_interrupt(). Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Message-ID: <20240416230437.1869024-2-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu_helper.c | 1 + target/riscv/debug.c | 3 +++ 2 files changed, 4 insertions(+) diff --git a/target/riscv/cpu_helper.c b/target/riscv/cpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_helper.c +++ b/target/riscv/cpu_helper.c @@ -XXX,XX +XXX,XX @@ void riscv_cpu_do_interrupt(CPUState *cs) tval = env->bins; break; case RISCV_EXCP_BREAKPOINT: + tval = env->badaddr; if (cs->watchpoint_hit) { tval = cs->watchpoint_hit->hitaddr; cs->watchpoint_hit = NULL; diff --git a/target/riscv/debug.c b/target/riscv/debug.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/debug.c +++ b/target/riscv/debug.c @@ -XXX,XX +XXX,XX @@ bool riscv_cpu_debug_check_breakpoint(CPUState *cs) if ((ctrl & TYPE2_EXEC) && (bp->pc == pc)) { /* check U/S/M bit against current privilege level */ if ((ctrl >> 3) & BIT(env->priv)) { + env->badaddr = pc; return true; } } @@ -XXX,XX +XXX,XX @@ bool riscv_cpu_debug_check_breakpoint(CPUState *cs) if (env->virt_enabled) { /* check VU/VS bit against current privilege level */ if ((ctrl >> 23) & BIT(env->priv)) { + env->badaddr = pc; return true; } } else { /* check U/S/M bit against current privilege level */ if ((ctrl >> 3) & BIT(env->priv)) { + env->badaddr = pc; return true; } } -- 2.45.1 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Privileged spec section 4.1.9 mentions: "When a trap is taken into S-mode, stval is written with exception-specific information to assist software in handling the trap. (...) If stval is written with a nonzero value when a breakpoint, address-misaligned, access-fault, or page-fault exception occurs on an instruction fetch, load, or store, then stval will contain the faulting virtual address." A similar text is found for mtval in section 3.1.16. Setting mtval/stval in this scenario is optional, but some softwares read these regs when handling ebreaks. Write 'badaddr' in all ebreak breakpoints to write the appropriate 'tval' during riscv_do_cpu_interrrupt(). Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20240416230437.1869024-3-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/insn_trans/trans_privileged.c.inc | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/riscv/insn_trans/trans_privileged.c.inc b/target/riscv/insn_trans/trans_privileged.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_privileged.c.inc +++ b/target/riscv/insn_trans/trans_privileged.c.inc @@ -XXX,XX +XXX,XX @@ static bool trans_ebreak(DisasContext *ctx, arg_ebreak *a) if (pre == 0x01f01013 && ebreak == 0x00100073 && post == 0x40705013) { generate_exception(ctx, RISCV_EXCP_SEMIHOST); } else { + tcg_gen_st_tl(tcg_constant_tl(ebreak_addr), tcg_env, + offsetof(CPURISCVState, badaddr)); generate_exception(ctx, RISCV_EXCP_BREAKPOINT); } return true; -- 2.45.1 From: Jason Chien <jason.chien@sifive.com> Add support for Zve32x extension and replace some checks for Zve32f with Zve32x, since Zve32f depends on Zve32x. Signed-off-by: Jason Chien <jason.chien@sifive.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Max Chou <max.chou@sifive.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20240328022343.6871-2-jason.chien@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu_cfg.h | 1 + target/riscv/cpu.c | 2 ++ target/riscv/cpu_helper.c | 2 +- target/riscv/csr.c | 2 +- target/riscv/tcg/tcg-cpu.c | 16 ++++++++-------- target/riscv/insn_trans/trans_rvv.c.inc | 4 ++-- 6 files changed, 15 insertions(+), 12 deletions(-) diff --git a/target/riscv/cpu_cfg.h b/target/riscv/cpu_cfg.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_cfg.h +++ b/target/riscv/cpu_cfg.h @@ -XXX,XX +XXX,XX @@ struct RISCVCPUConfig { bool ext_zhinx; bool ext_zhinxmin; bool ext_zve32f; + bool ext_zve32x; bool ext_zve64f; bool ext_zve64d; bool ext_zvbb; diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(zvbb, PRIV_VERSION_1_12_0, ext_zvbb), ISA_EXT_DATA_ENTRY(zvbc, PRIV_VERSION_1_12_0, ext_zvbc), ISA_EXT_DATA_ENTRY(zve32f, PRIV_VERSION_1_10_0, ext_zve32f), + ISA_EXT_DATA_ENTRY(zve32x, PRIV_VERSION_1_10_0, ext_zve32x), ISA_EXT_DATA_ENTRY(zve64f, PRIV_VERSION_1_10_0, ext_zve64f), ISA_EXT_DATA_ENTRY(zve64d, PRIV_VERSION_1_10_0, ext_zve64d), ISA_EXT_DATA_ENTRY(zvfbfmin, PRIV_VERSION_1_12_0, ext_zvfbfmin), @@ -XXX,XX +XXX,XX @@ const RISCVCPUMultiExtConfig riscv_cpu_extensions[] = { MULTI_EXT_CFG_BOOL("zfh", ext_zfh, false), MULTI_EXT_CFG_BOOL("zfhmin", ext_zfhmin, false), MULTI_EXT_CFG_BOOL("zve32f", ext_zve32f, false), + MULTI_EXT_CFG_BOOL("zve32x", ext_zve32x, false), MULTI_EXT_CFG_BOOL("zve64f", ext_zve64f, false), MULTI_EXT_CFG_BOOL("zve64d", ext_zve64d, false), MULTI_EXT_CFG_BOOL("zvfbfmin", ext_zvfbfmin, false), diff --git a/target/riscv/cpu_helper.c b/target/riscv/cpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_helper.c +++ b/target/riscv/cpu_helper.c @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPURISCVState *env, vaddr *pc, *pc = env->xl == MXL_RV32 ? env->pc & UINT32_MAX : env->pc; *cs_base = 0; - if (cpu->cfg.ext_zve32f) { + if (cpu->cfg.ext_zve32x) { /* * If env->vl equals to VLMAX, we can use generic vector operation * expanders (GVEC) to accerlate the vector operations. diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException fs(CPURISCVState *env, int csrno) static RISCVException vs(CPURISCVState *env, int csrno) { - if (riscv_cpu_cfg(env)->ext_zve32f) { + if (riscv_cpu_cfg(env)->ext_zve32x) { #if !defined(CONFIG_USER_ONLY) if (!env->debugger && !riscv_cpu_vector_enabled(env)) { return RISCV_EXCP_ILLEGAL_INST; diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ void riscv_cpu_validate_set_extensions(RISCVCPU *cpu, Error **errp) return; } - if (cpu->cfg.ext_zve32f && !riscv_has_ext(env, RVF)) { - error_setg(errp, "Zve32f/Zve64f extensions require F extension"); - return; + /* The Zve32f extension depends on the Zve32x extension */ + if (cpu->cfg.ext_zve32f) { + if (!riscv_has_ext(env, RVF)) { + error_setg(errp, "Zve32f/Zve64f extensions require F extension"); + return; + } + cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zve32x), true); } if (cpu->cfg.ext_zvfh) { @@ -XXX,XX +XXX,XX @@ void riscv_cpu_validate_set_extensions(RISCVCPU *cpu, Error **errp) cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zvbc), true); } - /* - * In principle Zve*x would also suffice here, were they supported - * in qemu - */ if ((cpu->cfg.ext_zvbb || cpu->cfg.ext_zvkb || cpu->cfg.ext_zvkg || cpu->cfg.ext_zvkned || cpu->cfg.ext_zvknha || cpu->cfg.ext_zvksed || - cpu->cfg.ext_zvksh) && !cpu->cfg.ext_zve32f) { + cpu->cfg.ext_zvksh) && !cpu->cfg.ext_zve32x) { error_setg(errp, "Vector crypto extensions require V or Zve* extensions"); return; diff --git a/target/riscv/insn_trans/trans_rvv.c.inc b/target/riscv/insn_trans/trans_rvv.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_rvv.c.inc +++ b/target/riscv/insn_trans/trans_rvv.c.inc @@ -XXX,XX +XXX,XX @@ static bool do_vsetvl(DisasContext *s, int rd, int rs1, TCGv s2) { TCGv s1, dst; - if (!require_rvv(s) || !s->cfg_ptr->ext_zve32f) { + if (!require_rvv(s) || !s->cfg_ptr->ext_zve32x) { return false; } @@ -XXX,XX +XXX,XX @@ static bool do_vsetivli(DisasContext *s, int rd, TCGv s1, TCGv s2) { TCGv dst; - if (!require_rvv(s) || !s->cfg_ptr->ext_zve32f) { + if (!require_rvv(s) || !s->cfg_ptr->ext_zve32x) { return false; } -- 2.45.1 From: Jason Chien <jason.chien@sifive.com> Add support for Zve64x extension. Enabling Zve64f enables Zve64x and enabling Zve64x enables Zve32x according to their dependency. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2107 Signed-off-by: Jason Chien <jason.chien@sifive.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Max Chou <max.chou@sifive.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20240328022343.6871-3-jason.chien@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu_cfg.h | 1 + target/riscv/cpu.c | 2 ++ target/riscv/tcg/tcg-cpu.c | 17 +++++++++++------ 3 files changed, 14 insertions(+), 6 deletions(-) diff --git a/target/riscv/cpu_cfg.h b/target/riscv/cpu_cfg.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_cfg.h +++ b/target/riscv/cpu_cfg.h @@ -XXX,XX +XXX,XX @@ struct RISCVCPUConfig { bool ext_zve32x; bool ext_zve64f; bool ext_zve64d; + bool ext_zve64x; bool ext_zvbb; bool ext_zvbc; bool ext_zvkb; diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(zve32x, PRIV_VERSION_1_10_0, ext_zve32x), ISA_EXT_DATA_ENTRY(zve64f, PRIV_VERSION_1_10_0, ext_zve64f), ISA_EXT_DATA_ENTRY(zve64d, PRIV_VERSION_1_10_0, ext_zve64d), + ISA_EXT_DATA_ENTRY(zve64x, PRIV_VERSION_1_10_0, ext_zve64x), ISA_EXT_DATA_ENTRY(zvfbfmin, PRIV_VERSION_1_12_0, ext_zvfbfmin), ISA_EXT_DATA_ENTRY(zvfbfwma, PRIV_VERSION_1_12_0, ext_zvfbfwma), ISA_EXT_DATA_ENTRY(zvfh, PRIV_VERSION_1_12_0, ext_zvfh), @@ -XXX,XX +XXX,XX @@ const RISCVCPUMultiExtConfig riscv_cpu_extensions[] = { MULTI_EXT_CFG_BOOL("zve32x", ext_zve32x, false), MULTI_EXT_CFG_BOOL("zve64f", ext_zve64f, false), MULTI_EXT_CFG_BOOL("zve64d", ext_zve64d, false), + MULTI_EXT_CFG_BOOL("zve64x", ext_zve64x, false), MULTI_EXT_CFG_BOOL("zvfbfmin", ext_zvfbfmin, false), MULTI_EXT_CFG_BOOL("zvfbfwma", ext_zvfbfwma, false), MULTI_EXT_CFG_BOOL("zvfh", ext_zvfh, false), diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ void riscv_cpu_validate_set_extensions(RISCVCPU *cpu, Error **errp) /* The Zve64d extension depends on the Zve64f extension */ if (cpu->cfg.ext_zve64d) { + if (!riscv_has_ext(env, RVD)) { + error_setg(errp, "Zve64d/V extensions require D extension"); + return; + } cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zve64f), true); } - /* The Zve64f extension depends on the Zve32f extension */ + /* The Zve64f extension depends on the Zve64x and Zve32f extensions */ if (cpu->cfg.ext_zve64f) { + cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zve64x), true); cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zve32f), true); } - if (cpu->cfg.ext_zve64d && !riscv_has_ext(env, RVD)) { - error_setg(errp, "Zve64d/V extensions require D extension"); - return; + /* The Zve64x extension depends on the Zve32x extension */ + if (cpu->cfg.ext_zve64x) { + cpu_cfg_ext_auto_update(cpu, CPU_CFG_OFFSET(ext_zve32x), true); } /* The Zve32f extension depends on the Zve32x extension */ @@ -XXX,XX +XXX,XX @@ void riscv_cpu_validate_set_extensions(RISCVCPU *cpu, Error **errp) return; } - if ((cpu->cfg.ext_zvbc || cpu->cfg.ext_zvknhb) && !cpu->cfg.ext_zve64f) { + if ((cpu->cfg.ext_zvbc || cpu->cfg.ext_zvknhb) && !cpu->cfg.ext_zve64x) { error_setg( errp, - "Zvbc and Zvknhb extensions require V or Zve64{f,d} extensions"); + "Zvbc and Zvknhb extensions require V or Zve64x extensions"); return; } -- 2.45.1 From: Jason Chien <jason.chien@sifive.com> In current implementation, the gdbstub allows reading vector registers only if V extension is supported. However, all vector extensions and vector crypto extensions have the vector registers and they all depend on Zve32x. The gdbstub should check for Zve32x instead. Signed-off-by: Jason Chien <jason.chien@sifive.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Max Chou <max.chou@sifive.com> Message-ID: <20240328022343.6871-4-jason.chien@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/gdbstub.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/riscv/gdbstub.c b/target/riscv/gdbstub.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/gdbstub.c +++ b/target/riscv/gdbstub.c @@ -XXX,XX +XXX,XX @@ void riscv_cpu_register_gdb_regs_for_features(CPUState *cs) gdb_find_static_feature("riscv-32bit-fpu.xml"), 0); } - if (env->misa_ext & RVV) { + if (cpu->cfg.ext_zve32x) { gdb_register_coprocessor(cs, riscv_gdb_get_vector, riscv_gdb_set_vector, ricsv_gen_dynamic_vector_feature(cs, cs->gdb_num_regs), -- 2.45.1 From: Huang Tao <eric.huang@linux.alibaba.com> In RVV and vcrypto instructions, the masked and tail elements are set to 1s using vext_set_elems_1s function if the vma/vta bit is set. It is the element agnostic policy. However, this function can't deal the big endian situation. This patch fixes the problem by adding handling of such case. Signed-off-by: Huang Tao <eric.huang@linux.alibaba.com> Suggested-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Cc: qemu-stable <qemu-stable@nongnu.org> Message-ID: <20240325021654.6594-1-eric.huang@linux.alibaba.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/vector_internals.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/target/riscv/vector_internals.c b/target/riscv/vector_internals.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/vector_internals.c +++ b/target/riscv/vector_internals.c @@ -XXX,XX +XXX,XX @@ void vext_set_elems_1s(void *base, uint32_t is_agnostic, uint32_t cnt, if (tot - cnt == 0) { return ; } + + if (HOST_BIG_ENDIAN) { + /* + * Deal the situation when the elements are insdie + * only one uint64 block including setting the + * masked-off element. + */ + if (((tot - 1) ^ cnt) < 8) { + memset(base + H1(tot - 1), -1, tot - cnt); + return; + } + /* + * Otherwise, at least cross two uint64_t blocks. + * Set first unaligned block. + */ + if (cnt % 8 != 0) { + uint32_t j = ROUND_UP(cnt, 8); + memset(base + H1(j - 1), -1, j - cnt); + cnt = j; + } + /* Set other 64bit aligend blocks */ + } memset(base + cnt, -1, tot - cnt); } -- 2.45.1 From: Yangyu Chen <cyy@cyyself.name> This code has a typo that writes zvkb to zvkg, causing users can't enable zvkb through the config. This patch gets this fixed. Signed-off-by: Yangyu Chen <cyy@cyyself.name> Fixes: ea61ef7097d0 ("target/riscv: Move vector crypto extensions to riscv_cpu_extensions") Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Max Chou <max.chou@sifive.com> Reviewed-by:  Weiwei Li <liwei1518@gmail.com> Message-ID: <tencent_7E34EEF0F90B9A68BF38BEE09EC6D4877C0A@qq.com> Cc: qemu-stable <qemu-stable@nongnu.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const RISCVCPUMultiExtConfig riscv_cpu_extensions[] = { /* Vector cryptography extensions */ MULTI_EXT_CFG_BOOL("zvbb", ext_zvbb, false), MULTI_EXT_CFG_BOOL("zvbc", ext_zvbc, false), - MULTI_EXT_CFG_BOOL("zvkb", ext_zvkg, false), + MULTI_EXT_CFG_BOOL("zvkb", ext_zvkb, false), MULTI_EXT_CFG_BOOL("zvkg", ext_zvkg, false), MULTI_EXT_CFG_BOOL("zvkned", ext_zvkned, false), MULTI_EXT_CFG_BOOL("zvknha", ext_zvknha, false), -- 2.45.1 From: Huang Tao <eric.huang@linux.alibaba.com> In this patch, we modify the decoder to be a freely composable data structure instead of a hardcoded one. It can be dynamically builded up according to the extensions. This approach has several benefits: 1. Provides support for heterogeneous cpu architectures. As we add decoder in RISCVCPU, each cpu can have their own decoder, and the decoders can be different due to cpu's features. 2. Improve the decoding efficiency. We run the guard_func to see if the decoder can be added to the dynamic_decoder when building up the decoder. Therefore, there is no need to run the guard_func when decoding each instruction. It can improve the decoding efficiency 3. For vendor or dynamic cpus, it allows them to customize their own decoder functions to improve decoding efficiency, especially when vendor-defined instruction sets increase. Because of dynamic building up, it can skip the other decoder guard functions when decoding. 4. Pre patch for allowing adding a vendor decoder before decode_insn32() with minimal overhead for users that don't need this particular vendor decoder. Signed-off-by: Huang Tao <eric.huang@linux.alibaba.com> Suggested-by: Christoph Muellner <christoph.muellner@vrull.eu> Co-authored-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240506023607.29544-1-eric.huang@linux.alibaba.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 1 + target/riscv/tcg/tcg-cpu.h | 15 +++++++++++++++ target/riscv/cpu.c | 1 + target/riscv/tcg/tcg-cpu.c | 15 +++++++++++++++ target/riscv/translate.c | 31 +++++++++++++++---------------- 5 files changed, 47 insertions(+), 16 deletions(-) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ struct ArchCPU { uint32_t pmu_avail_ctrs; /* Mapping of events to counters */ GHashTable *pmu_event_ctr_map; + const GPtrArray *decoders; }; /** diff --git a/target/riscv/tcg/tcg-cpu.h b/target/riscv/tcg/tcg-cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.h +++ b/target/riscv/tcg/tcg-cpu.h @@ -XXX,XX +XXX,XX @@ void riscv_cpu_validate_set_extensions(RISCVCPU *cpu, Error **errp); void riscv_tcg_cpu_finalize_features(RISCVCPU *cpu, Error **errp); bool riscv_cpu_tcg_compatible(RISCVCPU *cpu); +struct DisasContext; +struct RISCVCPUConfig; +typedef struct RISCVDecoder { + bool (*guard_func)(const struct RISCVCPUConfig *); + bool (*riscv_cpu_decode_fn)(struct DisasContext *, uint32_t); +} RISCVDecoder; + +typedef bool (*riscv_cpu_decode_fn)(struct DisasContext *, uint32_t); + +extern const size_t decoder_table_size; + +extern const RISCVDecoder decoder_table[]; + +void riscv_tcg_cpu_finalize_dynamic_decoder(RISCVCPU *cpu); + #endif diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ void riscv_cpu_finalize_features(RISCVCPU *cpu, Error **errp) error_propagate(errp, local_err); return; } + riscv_tcg_cpu_finalize_dynamic_decoder(cpu); } else if (kvm_enabled()) { riscv_kvm_cpu_finalize_features(cpu, &local_err); if (local_err != NULL) { diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ void riscv_tcg_cpu_finalize_features(RISCVCPU *cpu, Error **errp) } } +void riscv_tcg_cpu_finalize_dynamic_decoder(RISCVCPU *cpu) +{ + GPtrArray *dynamic_decoders; + dynamic_decoders = g_ptr_array_sized_new(decoder_table_size); + for (size_t i = 0; i < decoder_table_size; ++i) { + if (decoder_table[i].guard_func && + decoder_table[i].guard_func(&cpu->cfg)) { + g_ptr_array_add(dynamic_decoders, + (gpointer)decoder_table[i].riscv_cpu_decode_fn); + } + } + + cpu->decoders = dynamic_decoders; +} + bool riscv_cpu_tcg_compatible(RISCVCPU *cpu) { return object_dynamic_cast(OBJECT(cpu), TYPE_RISCV_CPU_HOST) == NULL; diff --git a/target/riscv/translate.c b/target/riscv/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/translate.c +++ b/target/riscv/translate.c @@ -XXX,XX +XXX,XX @@ #include "exec/helper-info.c.inc" #undef HELPER_H +#include "tcg/tcg-cpu.h" + /* global register indices */ static TCGv cpu_gpr[32], cpu_gprh[32], cpu_pc, cpu_vl, cpu_vstart; static TCGv_i64 cpu_fpr[32]; /* assume F and D extensions */ @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { /* FRM is known to contain a valid value. */ bool frm_valid; bool insn_start_updated; + const GPtrArray *decoders; } DisasContext; static inline bool has_ext(DisasContext *ctx, uint32_t ext) @@ -XXX,XX +XXX,XX @@ static inline int insn_len(uint16_t first_word) return (first_word & 3) == 3 ? 4 : 2; } +const RISCVDecoder decoder_table[] = { + { always_true_p, decode_insn32 }, + { has_xthead_p, decode_xthead}, + { has_XVentanaCondOps_p, decode_XVentanaCodeOps}, +}; + +const size_t decoder_table_size = ARRAY_SIZE(decoder_table); + static void decode_opc(CPURISCVState *env, DisasContext *ctx, uint16_t opcode) { - /* - * A table with predicate (i.e., guard) functions and decoder functions - * that are tested in-order until a decoder matches onto the opcode. - */ - static const struct { - bool (*guard_func)(const RISCVCPUConfig *); - bool (*decode_func)(DisasContext *, uint32_t); - } decoders[] = { - { always_true_p, decode_insn32 }, - { has_xthead_p, decode_xthead }, - { has_XVentanaCondOps_p, decode_XVentanaCodeOps }, - }; - ctx->virt_inst_excp = false; ctx->cur_insn_len = insn_len(opcode); /* Check for compressed insn */ @@ -XXX,XX +XXX,XX @@ static void decode_opc(CPURISCVState *env, DisasContext *ctx, uint16_t opcode) ctx->base.pc_next + 2)); ctx->opcode = opcode32; - for (size_t i = 0; i < ARRAY_SIZE(decoders); ++i) { - if (decoders[i].guard_func(ctx->cfg_ptr) && - decoders[i].decode_func(ctx, opcode32)) { + for (guint i = 0; i < ctx->decoders->len; ++i) { + riscv_cpu_decode_fn func = g_ptr_array_index(ctx->decoders, i); + if (func(ctx, opcode32)) { return; } } @@ -XXX,XX +XXX,XX @@ static void riscv_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) ctx->itrigger = FIELD_EX32(tb_flags, TB_FLAGS, ITRIGGER); ctx->zero = tcg_constant_tl(0); ctx->virt_inst_excp = false; + ctx->decoders = cpu->decoders; } static void riscv_tr_tb_start(DisasContextBase *db, CPUState *cpu) -- 2.45.1 From: Christoph Müllner <christoph.muellner@vrull.eu> The th.sxstatus CSR can be used to identify available custom extension on T-Head CPUs. The CSR is documented here: https://github.com/T-head-Semi/thead-extension-spec/blob/master/xtheadsxstatus.adoc An important property of this patch is, that the th.sxstatus MAEE field is not set (indicating that XTheadMae is not available). XTheadMae is a memory attribute extension (similar to Svpbmt) which is implemented in many T-Head CPUs (C906, C910, etc.) and utilizes bits in PTEs that are marked as reserved. QEMU maintainers prefer to not implement XTheadMae, so we need give kernels a mechanism to identify if XTheadMae is available in a system or not. And this patch introduces this mechanism in QEMU in a way that's compatible with real HW (i.e., probing the th.sxstatus.MAEE bit). Further context can be found on the list: https://lists.gnu.org/archive/html/qemu-devel/2024-02/msg00775.html Reviewed-by: LIU Zhiwei <zhiwe_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu> Message-ID: <20240429073656.2486732-1-christoph.muellner@vrull.eu> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- MAINTAINERS | 1 + target/riscv/cpu.h | 3 ++ target/riscv/cpu.c | 1 + target/riscv/th_csr.c | 79 ++++++++++++++++++++++++++++++++++++++++ target/riscv/meson.build | 1 + 5 files changed, 85 insertions(+) create mode 100644 target/riscv/th_csr.c diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ L: qemu-riscv@nongnu.org S: Supported F: target/riscv/insn_trans/trans_xthead.c.inc F: target/riscv/xthead*.decode +F: target/riscv/th_* F: disas/riscv-xthead* RISC-V XVentanaCondOps extension diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ target_ulong riscv_new_csr_seed(target_ulong new_value, uint8_t satp_mode_max_from_map(uint32_t map); const char *satp_mode_str(uint8_t satp_mode, bool is_32_bit); +/* Implemented in th_csr.c */ +void th_register_custom_csrs(RISCVCPU *cpu); + #endif /* RISCV_CPU_H */ diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static void rv64_thead_c906_cpu_init(Object *obj) cpu->cfg.mvendorid = THEAD_VENDOR_ID; #ifndef CONFIG_USER_ONLY set_satp_mode_max_supported(cpu, VM_1_10_SV39); + th_register_custom_csrs(cpu); #endif /* inherited from parent obj via riscv_cpu_init() */ diff --git a/target/riscv/th_csr.c b/target/riscv/th_csr.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/target/riscv/th_csr.c @@ -XXX,XX +XXX,XX @@ +/* + * T-Head-specific CSRs. + * + * Copyright (c) 2024 VRULL GmbH + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2 or later, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "cpu.h" +#include "cpu_vendorid.h" + +#define CSR_TH_SXSTATUS 0x5c0 + +/* TH_SXSTATUS bits */ +#define TH_SXSTATUS_UCME BIT(16) +#define TH_SXSTATUS_MAEE BIT(21) +#define TH_SXSTATUS_THEADISAEE BIT(22) + +typedef struct { + int csrno; + int (*insertion_test)(RISCVCPU *cpu); + riscv_csr_operations csr_ops; +} riscv_csr; + +static RISCVException smode(CPURISCVState *env, int csrno) +{ + if (riscv_has_ext(env, RVS)) { + return RISCV_EXCP_NONE; + } + + return RISCV_EXCP_ILLEGAL_INST; +} + +static int test_thead_mvendorid(RISCVCPU *cpu) +{ + if (cpu->cfg.mvendorid != THEAD_VENDOR_ID) { + return -1; + } + + return 0; +} + +static RISCVException read_th_sxstatus(CPURISCVState *env, int csrno, + target_ulong *val) +{ + /* We don't set MAEE here, because QEMU does not implement MAEE. */ + *val = TH_SXSTATUS_UCME | TH_SXSTATUS_THEADISAEE; + return RISCV_EXCP_NONE; +} + +static riscv_csr th_csr_list[] = { + { + .csrno = CSR_TH_SXSTATUS, + .insertion_test = test_thead_mvendorid, + .csr_ops = { "th.sxstatus", smode, read_th_sxstatus } + } +}; + +void th_register_custom_csrs(RISCVCPU *cpu) +{ + for (size_t i = 0; i < ARRAY_SIZE(th_csr_list); i++) { + int csrno = th_csr_list[i].csrno; + riscv_csr_operations *csr_ops = &th_csr_list[i].csr_ops; + if (!th_csr_list[i].insertion_test(cpu)) { + riscv_set_csr_ops(csrno, csr_ops); + } + } +} diff --git a/target/riscv/meson.build b/target/riscv/meson.build index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/meson.build +++ b/target/riscv/meson.build @@ -XXX,XX +XXX,XX @@ riscv_system_ss.add(files( 'monitor.c', 'machine.c', 'pmu.c', + 'th_csr.c', 'time_helper.c', 'riscv-qmp-cmds.c', )) -- 2.45.1 From: Max Chou <max.chou@sifive.com> According v spec 18.4, only the vfwcvt.f.f.v and vfncvt.f.f.w instructions will be affected by Zvfhmin extension. And the vfwcvt.f.f.v and vfncvt.f.f.w instructions only support the conversions of * From 1*SEW(16/32) to 2*SEW(32/64) * From 2*SEW(32/64) to 1*SEW(16/32) Signed-off-by: Max Chou <max.chou@sifive.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Cc: qemu-stable <qemu-stable@nongnu.org> Message-ID: <20240322092600.1198921-2-max.chou@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/insn_trans/trans_rvv.c.inc | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) diff --git a/target/riscv/insn_trans/trans_rvv.c.inc b/target/riscv/insn_trans/trans_rvv.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_rvv.c.inc +++ b/target/riscv/insn_trans/trans_rvv.c.inc @@ -XXX,XX +XXX,XX @@ static bool require_rvf(DisasContext *s) } } +static bool require_rvfmin(DisasContext *s) +{ + if (s->mstatus_fs == EXT_STATUS_DISABLED) { + return false; + } + + switch (s->sew) { + case MO_16: + return s->cfg_ptr->ext_zvfhmin; + case MO_32: + return s->cfg_ptr->ext_zve32f; + default: + return false; + } +} + static bool require_scale_rvf(DisasContext *s) { if (s->mstatus_fs == EXT_STATUS_DISABLED) { @@ -XXX,XX +XXX,XX @@ static bool require_scale_rvfmin(DisasContext *s) } switch (s->sew) { - case MO_8: - return s->cfg_ptr->ext_zvfhmin; case MO_16: return s->cfg_ptr->ext_zve32f; case MO_32: @@ -XXX,XX +XXX,XX @@ static bool opxfv_widen_check(DisasContext *s, arg_rmr *a) static bool opffv_widen_check(DisasContext *s, arg_rmr *a) { return opfv_widen_check(s, a) && + require_rvfmin(s) && require_scale_rvfmin(s) && (s->sew != MO_8); } @@ -XXX,XX +XXX,XX @@ static bool opfxv_narrow_check(DisasContext *s, arg_rmr *a) static bool opffv_narrow_check(DisasContext *s, arg_rmr *a) { return opfv_narrow_check(s, a) && + require_rvfmin(s) && require_scale_rvfmin(s) && (s->sew != MO_8); } -- 2.45.1 From: Max Chou <max.chou@sifive.com> The require_scale_rvf function only checks the double width operator for the vector floating point widen instructions, so most of the widen checking functions need to add require_rvf for single width operator. The vfwcvt.f.x.v and vfwcvt.f.xu.v instructions convert single width integer to double width float, so the opfxv_widen_check function doesn’t need require_rvf for the single width operator(integer). Signed-off-by: Max Chou <max.chou@sifive.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Cc: qemu-stable <qemu-stable@nongnu.org> Message-ID: <20240322092600.1198921-3-max.chou@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/insn_trans/trans_rvv.c.inc | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/target/riscv/insn_trans/trans_rvv.c.inc b/target/riscv/insn_trans/trans_rvv.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_rvv.c.inc +++ b/target/riscv/insn_trans/trans_rvv.c.inc @@ -XXX,XX +XXX,XX @@ GEN_OPFVF_TRANS(vfrsub_vf, opfvf_check) static bool opfvv_widen_check(DisasContext *s, arg_rmrr *a) { return require_rvv(s) && + require_rvf(s) && require_scale_rvf(s) && (s->sew != MO_8) && vext_check_isa_ill(s) && @@ -XXX,XX +XXX,XX @@ GEN_OPFVV_WIDEN_TRANS(vfwsub_vv, opfvv_widen_check) static bool opfvf_widen_check(DisasContext *s, arg_rmrr *a) { return require_rvv(s) && + require_rvf(s) && require_scale_rvf(s) && (s->sew != MO_8) && vext_check_isa_ill(s) && @@ -XXX,XX +XXX,XX @@ GEN_OPFVF_WIDEN_TRANS(vfwsub_vf) static bool opfwv_widen_check(DisasContext *s, arg_rmrr *a) { return require_rvv(s) && + require_rvf(s) && require_scale_rvf(s) && (s->sew != MO_8) && vext_check_isa_ill(s) && @@ -XXX,XX +XXX,XX @@ GEN_OPFWV_WIDEN_TRANS(vfwsub_wv) static bool opfwf_widen_check(DisasContext *s, arg_rmrr *a) { return require_rvv(s) && + require_rvf(s) && require_scale_rvf(s) && (s->sew != MO_8) && vext_check_isa_ill(s) && @@ -XXX,XX +XXX,XX @@ GEN_OPFVV_TRANS(vfredmin_vs, freduction_check) static bool freduction_widen_check(DisasContext *s, arg_rmrr *a) { return reduction_widen_check(s, a) && + require_rvf(s) && require_scale_rvf(s) && (s->sew != MO_8); } -- 2.45.1 From: Max Chou <max.chou@sifive.com> The opfv_narrow_check needs to check the single width float operator by require_rvf. Signed-off-by: Max Chou <max.chou@sifive.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Cc: qemu-stable <qemu-stable@nongnu.org> Message-ID: <20240322092600.1198921-4-max.chou@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/insn_trans/trans_rvv.c.inc | 1 + 1 file changed, 1 insertion(+) diff --git a/target/riscv/insn_trans/trans_rvv.c.inc b/target/riscv/insn_trans/trans_rvv.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_rvv.c.inc +++ b/target/riscv/insn_trans/trans_rvv.c.inc @@ -XXX,XX +XXX,XX @@ static bool opffv_narrow_check(DisasContext *s, arg_rmr *a) static bool opffv_rod_narrow_check(DisasContext *s, arg_rmr *a) { return opfv_narrow_check(s, a) && + require_rvf(s) && require_scale_rvf(s) && (s->sew != MO_8); } -- 2.45.1 From: Max Chou <max.chou@sifive.com> If the checking functions check both the single and double width operators at the same time, then the single width operator checking functions (require_rvf[min]) will check whether the SEW is 8. Signed-off-by: Max Chou <max.chou@sifive.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Cc: qemu-stable <qemu-stable@nongnu.org> Message-ID: <20240322092600.1198921-5-max.chou@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/insn_trans/trans_rvv.c.inc | 16 ++++------------ 1 file changed, 4 insertions(+), 12 deletions(-) diff --git a/target/riscv/insn_trans/trans_rvv.c.inc b/target/riscv/insn_trans/trans_rvv.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_rvv.c.inc +++ b/target/riscv/insn_trans/trans_rvv.c.inc @@ -XXX,XX +XXX,XX @@ static bool opfvv_widen_check(DisasContext *s, arg_rmrr *a) return require_rvv(s) && require_rvf(s) && require_scale_rvf(s) && - (s->sew != MO_8) && vext_check_isa_ill(s) && vext_check_dss(s, a->rd, a->rs1, a->rs2, a->vm); } @@ -XXX,XX +XXX,XX @@ static bool opfvf_widen_check(DisasContext *s, arg_rmrr *a) return require_rvv(s) && require_rvf(s) && require_scale_rvf(s) && - (s->sew != MO_8) && vext_check_isa_ill(s) && vext_check_ds(s, a->rd, a->rs2, a->vm); } @@ -XXX,XX +XXX,XX @@ static bool opfwv_widen_check(DisasContext *s, arg_rmrr *a) return require_rvv(s) && require_rvf(s) && require_scale_rvf(s) && - (s->sew != MO_8) && vext_check_isa_ill(s) && vext_check_dds(s, a->rd, a->rs1, a->rs2, a->vm); } @@ -XXX,XX +XXX,XX @@ static bool opfwf_widen_check(DisasContext *s, arg_rmrr *a) return require_rvv(s) && require_rvf(s) && require_scale_rvf(s) && - (s->sew != MO_8) && vext_check_isa_ill(s) && vext_check_dd(s, a->rd, a->rs2, a->vm); } @@ -XXX,XX +XXX,XX @@ static bool opffv_widen_check(DisasContext *s, arg_rmr *a) { return opfv_widen_check(s, a) && require_rvfmin(s) && - require_scale_rvfmin(s) && - (s->sew != MO_8); + require_scale_rvfmin(s); } #define GEN_OPFV_WIDEN_TRANS(NAME, CHECK, HELPER, FRM) \ @@ -XXX,XX +XXX,XX @@ static bool opffv_narrow_check(DisasContext *s, arg_rmr *a) { return opfv_narrow_check(s, a) && require_rvfmin(s) && - require_scale_rvfmin(s) && - (s->sew != MO_8); + require_scale_rvfmin(s); } static bool opffv_rod_narrow_check(DisasContext *s, arg_rmr *a) { return opfv_narrow_check(s, a) && require_rvf(s) && - require_scale_rvf(s) && - (s->sew != MO_8); + require_scale_rvf(s); } #define GEN_OPFV_NARROW_TRANS(NAME, CHECK, HELPER, FRM) \ @@ -XXX,XX +XXX,XX @@ static bool freduction_widen_check(DisasContext *s, arg_rmrr *a) { return reduction_widen_check(s, a) && require_rvf(s) && - require_scale_rvf(s) && - (s->sew != MO_8); + require_scale_rvf(s); } GEN_OPFVV_WIDEN_TRANS(vfwredusum_vs, freduction_widen_check) -- 2.45.1 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> raise_mmu_exception(), as is today, is prioritizing guest page faults by checking first if virt_enabled && !first_stage, and then considering the regular inst/load/store faults. There's no mention in the spec about guest page fault being a higher priority that PMP faults. In fact, privileged spec section 3.7.1 says: "Attempting to fetch an instruction from a PMP region that does not have execute permissions raises an instruction access-fault exception. Attempting to execute a load or load-reserved instruction which accesses a physical address within a PMP region without read permissions raises a load access-fault exception. Attempting to execute a store, store-conditional, or AMO instruction which accesses a physical address within a PMP region without write permissions raises a store access-fault exception." So, in fact, we're doing it wrong - PMP faults should always be thrown, regardless of also being a first or second stage fault. The way riscv_cpu_tlb_fill() and get_physical_address() work is adequate: a TRANSLATE_PMP_FAIL error is immediately reported and reflected in the 'pmp_violation' flag. What we need is to change raise_mmu_exception() to prioritize it. Reported-by: Joseph Chan <jchan@ventanamicro.com> Fixes: 82d53adfbb ("target/riscv/cpu_helper.c: Invalid exception on MMU translation stage") Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240413105929.7030-1-alexei.filippov@syntacore.com> Cc: qemu-stable <qemu-stable@nongnu.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu_helper.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-) diff --git a/target/riscv/cpu_helper.c b/target/riscv/cpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_helper.c +++ b/target/riscv/cpu_helper.c @@ -XXX,XX +XXX,XX @@ static void raise_mmu_exception(CPURISCVState *env, target_ulong address, switch (access_type) { case MMU_INST_FETCH: - if (env->virt_enabled && !first_stage) { + if (pmp_violation) { + cs->exception_index = RISCV_EXCP_INST_ACCESS_FAULT; + } else if (env->virt_enabled && !first_stage) { cs->exception_index = RISCV_EXCP_INST_GUEST_PAGE_FAULT; } else { - cs->exception_index = pmp_violation ? - RISCV_EXCP_INST_ACCESS_FAULT : RISCV_EXCP_INST_PAGE_FAULT; + cs->exception_index = RISCV_EXCP_INST_PAGE_FAULT; } break; case MMU_DATA_LOAD: - if (two_stage && !first_stage) { + if (pmp_violation) { + cs->exception_index = RISCV_EXCP_LOAD_ACCESS_FAULT; + } else if (two_stage && !first_stage) { cs->exception_index = RISCV_EXCP_LOAD_GUEST_ACCESS_FAULT; } else { - cs->exception_index = pmp_violation ? - RISCV_EXCP_LOAD_ACCESS_FAULT : RISCV_EXCP_LOAD_PAGE_FAULT; + cs->exception_index = RISCV_EXCP_LOAD_PAGE_FAULT; } break; case MMU_DATA_STORE: - if (two_stage && !first_stage) { + if (pmp_violation) { + cs->exception_index = RISCV_EXCP_STORE_AMO_ACCESS_FAULT; + } else if (two_stage && !first_stage) { cs->exception_index = RISCV_EXCP_STORE_GUEST_AMO_ACCESS_FAULT; } else { - cs->exception_index = pmp_violation ? - RISCV_EXCP_STORE_AMO_ACCESS_FAULT : - RISCV_EXCP_STORE_PAGE_FAULT; + cs->exception_index = RISCV_EXCP_STORE_PAGE_FAULT; } break; default: -- 2.45.1 From: Alexei Filippov <alexei.filippov@syntacore.com> Previous patch fixed the PMP priority in raise_mmu_exception() but we're still setting mtval2 incorrectly. In riscv_cpu_tlb_fill(), after pmp check in 2 stage translation part, mtval2 will be set in case of successes 2 stage translation but failed pmp check. In this case we gonna set mtval2 via env->guest_phys_fault_addr in context of riscv_cpu_tlb_fill(), as this was a guest-page-fault, but it didn't and mtval2 should be zero, according to RISCV privileged spec sect. 9.4.4: When a guest page-fault is taken into M-mode, mtval2 is written with either zero or guest physical address that faulted, shifted by 2 bits. *For other traps, mtval2 is set to zero...* Signed-off-by: Alexei Filippov <alexei.filippov@syntacore.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240503103052.6819-1-alexei.filippov@syntacore.com> Cc: qemu-stable <qemu-stable@nongnu.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu_helper.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/target/riscv/cpu_helper.c b/target/riscv/cpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_helper.c +++ b/target/riscv/cpu_helper.c @@ -XXX,XX +XXX,XX @@ bool riscv_cpu_tlb_fill(CPUState *cs, vaddr address, int size, __func__, pa, ret, prot_pmp, tlb_size); prot &= prot_pmp; - } - - if (ret != TRANSLATE_SUCCESS) { + } else { /* * Guest physical address translation failed, this is a HS * level exception */ first_stage_error = false; - env->guest_phys_fault_addr = (im_address | - (address & - (TARGET_PAGE_SIZE - 1))) >> 2; + if (ret != TRANSLATE_PMP_FAIL) { + env->guest_phys_fault_addr = (im_address | + (address & + (TARGET_PAGE_SIZE - 1))) >> 2; + } } } } else { -- 2.45.1 From: Rob Bradford <rbradford@rivosinc.com> This extension has now been ratified: https://jira.riscv.org/browse/RVS-2006 so the "x-" prefix can be removed. Since this is now a ratified extension add it to the list of extensions included in the "max" CPU variant. Signed-off-by: Rob Bradford <rbradford@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Message-ID: <20240514110217.22516-1-rbradford@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 2 +- target/riscv/tcg/tcg-cpu.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static const MISAExtInfo misa_ext_info_arr[] = { MISA_EXT_INFO(RVJ, "x-j", "Dynamic translated languages"), MISA_EXT_INFO(RVV, "v", "Vector operations"), MISA_EXT_INFO(RVG, "g", "General purpose (IMAFD_Zicsr_Zifencei)"), - MISA_EXT_INFO(RVB, "x-b", "Bit manipulation (Zba_Zbb_Zbs)") + MISA_EXT_INFO(RVB, "b", "Bit manipulation (Zba_Zbb_Zbs)") }; static void riscv_cpu_validate_misa_mxl(RISCVCPUClass *mcc) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_init_max_cpu_extensions(Object *obj) const RISCVCPUMultiExtConfig *prop; /* Enable RVG, RVJ and RVV that are disabled by default */ - riscv_cpu_set_misa_ext(env, env->misa_ext | RVG | RVJ | RVV); + riscv_cpu_set_misa_ext(env, env->misa_ext | RVB | RVG | RVJ | RVV); for (prop = riscv_cpu_extensions; prop && prop->name; prop++) { isa_ext_update_enabled(cpu, prop->offset, true); -- 2.45.1 From: Alistair Francis <alistair23@gmail.com> When running the instruction ``` cbo.flush 0(x0) ``` QEMU would segfault. The issue was in cpu_gpr[a->rs1] as QEMU does not have cpu_gpr[0] allocated. In order to fix this let's use the existing get_address() helper. This also has the benefit of performing pointer mask calculations on the address specified in rs1. The pointer masking specificiation specifically states: """ Cache Management Operations: All instructions in Zicbom, Zicbop and Zicboz """ So this is the correct behaviour and we previously have been incorrectly not masking the address. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reported-by: Fabian Thomas <fabian.thomas@cispa.de> Fixes: e05da09b7cfd ("target/riscv: implement Zicbom extension") Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Cc: qemu-stable <qemu-stable@nongnu.org> Message-ID: <20240514023910.301766-1-alistair.francis@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/insn_trans/trans_rvzicbo.c.inc | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/target/riscv/insn_trans/trans_rvzicbo.c.inc b/target/riscv/insn_trans/trans_rvzicbo.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_rvzicbo.c.inc +++ b/target/riscv/insn_trans/trans_rvzicbo.c.inc @@ -XXX,XX +XXX,XX @@ static bool trans_cbo_clean(DisasContext *ctx, arg_cbo_clean *a) { REQUIRE_ZICBOM(ctx); - gen_helper_cbo_clean_flush(tcg_env, cpu_gpr[a->rs1]); + TCGv src = get_address(ctx, a->rs1, 0); + + gen_helper_cbo_clean_flush(tcg_env, src); return true; } static bool trans_cbo_flush(DisasContext *ctx, arg_cbo_flush *a) { REQUIRE_ZICBOM(ctx); - gen_helper_cbo_clean_flush(tcg_env, cpu_gpr[a->rs1]); + TCGv src = get_address(ctx, a->rs1, 0); + + gen_helper_cbo_clean_flush(tcg_env, src); return true; } static bool trans_cbo_inval(DisasContext *ctx, arg_cbo_inval *a) { REQUIRE_ZICBOM(ctx); - gen_helper_cbo_inval(tcg_env, cpu_gpr[a->rs1]); + TCGv src = get_address(ctx, a->rs1, 0); + + gen_helper_cbo_inval(tcg_env, src); return true; } static bool trans_cbo_zero(DisasContext *ctx, arg_cbo_zero *a) { REQUIRE_ZICBOZ(ctx); - gen_helper_cbo_zero(tcg_env, cpu_gpr[a->rs1]); + TCGv src = get_address(ctx, a->rs1, 0); + + gen_helper_cbo_zero(tcg_env, src); return true; } -- 2.45.1 From: Yong-Xuan Wang <yongxuan.wang@sifive.com> In AIA spec, each hart (or each hart within a group) has a unique hart number to locate the memory pages of interrupt files in the address space. The number of bits required to represent any hart number is equal to ceil(log2(hmax + 1)), where hmax is the largest hart number among groups. However, if the largest hart number among groups is a power of 2, QEMU will pass an inaccurate hart-index-bit setting to Linux. For example, when the guest OS has 4 harts, only ceil(log2(3 + 1)) = 2 bits are sufficient to represent 4 harts, but we passes 3 to Linux. The code needs to be updated to ensure accurate hart-index-bit settings. Additionally, a Linux patch[1] is necessary to correctly recover the hart index when the guest OS has only 1 hart, where the hart-index-bit is 0. [1] https://lore.kernel.org/lkml/20240415064905.25184-1-yongxuan.wang@sifive.com/t/ Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Cc: qemu-stable <qemu-stable@nongnu.org> Message-ID: <20240515091129.28116-1-yongxuan.wang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/kvm/kvm-cpu.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/target/riscv/kvm/kvm-cpu.c b/target/riscv/kvm/kvm-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/kvm/kvm-cpu.c +++ b/target/riscv/kvm/kvm-cpu.c @@ -XXX,XX +XXX,XX @@ void kvm_riscv_aia_create(MachineState *machine, uint64_t group_shift, } } - hart_bits = find_last_bit(&max_hart_per_socket, BITS_PER_LONG) + 1; + + if (max_hart_per_socket > 1) { + max_hart_per_socket--; + hart_bits = find_last_bit(&max_hart_per_socket, BITS_PER_LONG) + 1; + } else { + hart_bits = 0; + } + ret = kvm_device_access(aia_fd, KVM_DEV_RISCV_AIA_GRP_CONFIG, KVM_DEV_RISCV_AIA_CONFIG_HART_BITS, &hart_bits, true, NULL); -- 2.45.1 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Commit 33a24910ae changed 'reg_width' to use 'vlenb', i.e. vector length in bytes, when in this context we want 'reg_width' as the length in bits. Fix 'reg_width' back to the value in bits like 7cb59921c05a ("target/riscv/gdbstub.c: use 'vlenb' instead of shifting 'vlen'") set beforehand. While we're at it, rename 'reg_width' to 'bitsize' to provide a bit more clarity about what the variable represents. 'bitsize' is also used in riscv_gen_dynamic_csr_feature() with the same purpose, i.e. as an input to gdb_feature_builder_append_reg(). Cc: Akihiko Odaki <akihiko.odaki@daynix.com> Cc: Alex Bennée <alex.bennee@linaro.org> Reported-by: Robin Dapp <rdapp.gcc@gmail.com> Fixes: 33a24910ae ("target/riscv: Use GDBFeature for dynamic XML") Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Acked-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Cc: qemu-stable <qemu-stable@nongnu.org> Message-ID: <20240517203054.880861-2-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/gdbstub.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/target/riscv/gdbstub.c b/target/riscv/gdbstub.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/gdbstub.c +++ b/target/riscv/gdbstub.c @@ -XXX,XX +XXX,XX @@ static GDBFeature *riscv_gen_dynamic_csr_feature(CPUState *cs, int base_reg) static GDBFeature *ricsv_gen_dynamic_vector_feature(CPUState *cs, int base_reg) { RISCVCPU *cpu = RISCV_CPU(cs); - int reg_width = cpu->cfg.vlenb; + int bitsize = cpu->cfg.vlenb << 3; GDBFeatureBuilder builder; int i; @@ -XXX,XX +XXX,XX @@ static GDBFeature *ricsv_gen_dynamic_vector_feature(CPUState *cs, int base_reg) /* First define types and totals in a whole VL */ for (i = 0; i < ARRAY_SIZE(vec_lanes); i++) { - int count = reg_width / vec_lanes[i].size; + int count = bitsize / vec_lanes[i].size; gdb_feature_builder_append_tag( &builder, "<vector id=\"%s\" type=\"%s\" count=\"%d\"/>", vec_lanes[i].id, vec_lanes[i].gdb_type, count); @@ -XXX,XX +XXX,XX @@ static GDBFeature *ricsv_gen_dynamic_vector_feature(CPUState *cs, int base_reg) /* Define vector registers */ for (i = 0; i < 32; i++) { gdb_feature_builder_append_reg(&builder, g_strdup_printf("v%d", i), - reg_width, i, "riscv_vector", "vector"); + bitsize, i, "riscv_vector", "vector"); } gdb_feature_builder_end(&builder); -- 2.45.1 From: Alistair Francis <alistair23@gmail.com> Previously we only listed a single pmpcfg CSR and the first 16 pmpaddr CSRs. This patch fixes this to list all 16 pmpcfg and all 64 pmpaddr CSRs are part of the disassembly. Reported-by: Eric DeVolder <eric_devolder@yahoo.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Fixes: ea10325917 ("RISC-V Disassembler") Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Cc: qemu-stable <qemu-stable@nongnu.org> Message-ID: <20240514051615.330979-1-alistair.francis@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- disas/riscv.c | 65 ++++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 64 insertions(+), 1 deletion(-) diff --git a/disas/riscv.c b/disas/riscv.c index XXXXXXX..XXXXXXX 100644 --- a/disas/riscv.c +++ b/disas/riscv.c @@ -XXX,XX +XXX,XX @@ static const char *csr_name(int csrno) case 0x0383: return "mibound"; case 0x0384: return "mdbase"; case 0x0385: return "mdbound"; - case 0x03a0: return "pmpcfg3"; + case 0x03a0: return "pmpcfg0"; + case 0x03a1: return "pmpcfg1"; + case 0x03a2: return "pmpcfg2"; + case 0x03a3: return "pmpcfg3"; + case 0x03a4: return "pmpcfg4"; + case 0x03a5: return "pmpcfg5"; + case 0x03a6: return "pmpcfg6"; + case 0x03a7: return "pmpcfg7"; + case 0x03a8: return "pmpcfg8"; + case 0x03a9: return "pmpcfg9"; + case 0x03aa: return "pmpcfg10"; + case 0x03ab: return "pmpcfg11"; + case 0x03ac: return "pmpcfg12"; + case 0x03ad: return "pmpcfg13"; + case 0x03ae: return "pmpcfg14"; + case 0x03af: return "pmpcfg15"; case 0x03b0: return "pmpaddr0"; case 0x03b1: return "pmpaddr1"; case 0x03b2: return "pmpaddr2"; @@ -XXX,XX +XXX,XX @@ static const char *csr_name(int csrno) case 0x03bd: return "pmpaddr13"; case 0x03be: return "pmpaddr14"; case 0x03bf: return "pmpaddr15"; + case 0x03c0: return "pmpaddr16"; + case 0x03c1: return "pmpaddr17"; + case 0x03c2: return "pmpaddr18"; + case 0x03c3: return "pmpaddr19"; + case 0x03c4: return "pmpaddr20"; + case 0x03c5: return "pmpaddr21"; + case 0x03c6: return "pmpaddr22"; + case 0x03c7: return "pmpaddr23"; + case 0x03c8: return "pmpaddr24"; + case 0x03c9: return "pmpaddr25"; + case 0x03ca: return "pmpaddr26"; + case 0x03cb: return "pmpaddr27"; + case 0x03cc: return "pmpaddr28"; + case 0x03cd: return "pmpaddr29"; + case 0x03ce: return "pmpaddr30"; + case 0x03cf: return "pmpaddr31"; + case 0x03d0: return "pmpaddr32"; + case 0x03d1: return "pmpaddr33"; + case 0x03d2: return "pmpaddr34"; + case 0x03d3: return "pmpaddr35"; + case 0x03d4: return "pmpaddr36"; + case 0x03d5: return "pmpaddr37"; + case 0x03d6: return "pmpaddr38"; + case 0x03d7: return "pmpaddr39"; + case 0x03d8: return "pmpaddr40"; + case 0x03d9: return "pmpaddr41"; + case 0x03da: return "pmpaddr42"; + case 0x03db: return "pmpaddr43"; + case 0x03dc: return "pmpaddr44"; + case 0x03dd: return "pmpaddr45"; + case 0x03de: return "pmpaddr46"; + case 0x03df: return "pmpaddr47"; + case 0x03e0: return "pmpaddr48"; + case 0x03e1: return "pmpaddr49"; + case 0x03e2: return "pmpaddr50"; + case 0x03e3: return "pmpaddr51"; + case 0x03e4: return "pmpaddr52"; + case 0x03e5: return "pmpaddr53"; + case 0x03e6: return "pmpaddr54"; + case 0x03e7: return "pmpaddr55"; + case 0x03e8: return "pmpaddr56"; + case 0x03e9: return "pmpaddr57"; + case 0x03ea: return "pmpaddr58"; + case 0x03eb: return "pmpaddr59"; + case 0x03ec: return "pmpaddr60"; + case 0x03ed: return "pmpaddr61"; + case 0x03ee: return "pmpaddr62"; + case 0x03ef: return "pmpaddr63"; case 0x0780: return "mtohost"; case 0x0781: return "mfromhost"; case 0x0782: return "mreset"; -- 2.45.1 From: Yu-Ming Chang <yumin686@andestech.com> Both CSRRS and CSRRC always read the addressed CSR and cause any read side effects regardless of rs1 and rd fields. Note that if rs1 specifies a register holding a zero value other than x0, the instruction will still attempt to write the unmodified value back to the CSR and will cause any attendant side effects. So if CSRRS or CSRRC tries to write a read-only CSR with rs1 which specifies a register holding a zero value, an illegal instruction exception should be raised. Signed-off-by: Yu-Ming Chang <yumin686@andestech.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240403070823.80897-1-yumin686@andestech.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 4 ++++ target/riscv/csr.c | 51 ++++++++++++++++++++++++++++++++++++---- target/riscv/op_helper.c | 6 ++--- 3 files changed, 53 insertions(+), 8 deletions(-) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPURISCVState *env, vaddr *pc, void riscv_cpu_update_mask(CPURISCVState *env); bool riscv_cpu_is_32bit(RISCVCPU *cpu); +RISCVException riscv_csrr(CPURISCVState *env, int csrno, + target_ulong *ret_value); RISCVException riscv_csrrw(CPURISCVState *env, int csrno, target_ulong *ret_value, target_ulong new_value, target_ulong write_mask); @@ -XXX,XX +XXX,XX @@ typedef RISCVException (*riscv_csr_op_fn)(CPURISCVState *env, int csrno, target_ulong new_value, target_ulong write_mask); +RISCVException riscv_csrr_i128(CPURISCVState *env, int csrno, + Int128 *ret_value); RISCVException riscv_csrrw_i128(CPURISCVState *env, int csrno, Int128 *ret_value, Int128 new_value, Int128 write_mask); diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException rmw_seed(CPURISCVState *env, int csrno, static inline RISCVException riscv_csrrw_check(CPURISCVState *env, int csrno, - bool write_mask) + bool write) { /* check privileges and return RISCV_EXCP_ILLEGAL_INST if check fails */ bool read_only = get_field(csrno, 0xC00) == 3; @@ -XXX,XX +XXX,XX @@ static inline RISCVException riscv_csrrw_check(CPURISCVState *env, } /* read / write check */ - if (write_mask && read_only) { + if (write && read_only) { return RISCV_EXCP_ILLEGAL_INST; } @@ -XXX,XX +XXX,XX @@ static RISCVException riscv_csrrw_do64(CPURISCVState *env, int csrno, return RISCV_EXCP_NONE; } +RISCVException riscv_csrr(CPURISCVState *env, int csrno, + target_ulong *ret_value) +{ + RISCVException ret = riscv_csrrw_check(env, csrno, false); + if (ret != RISCV_EXCP_NONE) { + return ret; + } + + return riscv_csrrw_do64(env, csrno, ret_value, 0, 0); +} + RISCVException riscv_csrrw(CPURISCVState *env, int csrno, target_ulong *ret_value, target_ulong new_value, target_ulong write_mask) { - RISCVException ret = riscv_csrrw_check(env, csrno, write_mask); + RISCVException ret = riscv_csrrw_check(env, csrno, true); if (ret != RISCV_EXCP_NONE) { return ret; } @@ -XXX,XX +XXX,XX @@ static RISCVException riscv_csrrw_do128(CPURISCVState *env, int csrno, return RISCV_EXCP_NONE; } +RISCVException riscv_csrr_i128(CPURISCVState *env, int csrno, + Int128 *ret_value) +{ + RISCVException ret; + + ret = riscv_csrrw_check(env, csrno, false); + if (ret != RISCV_EXCP_NONE) { + return ret; + } + + if (csr_ops[csrno].read128) { + return riscv_csrrw_do128(env, csrno, ret_value, + int128_zero(), int128_zero()); + } + + /* + * Fall back to 64-bit version for now, if the 128-bit alternative isn't + * at all defined. + * Note, some CSRs don't need to extend to MXLEN (64 upper bits non + * significant), for those, this fallback is correctly handling the + * accesses + */ + target_ulong old_value; + ret = riscv_csrrw_do64(env, csrno, &old_value, + (target_ulong)0, + (target_ulong)0); + if (ret == RISCV_EXCP_NONE && ret_value) { + *ret_value = int128_make64(old_value); + } + return ret; +} + RISCVException riscv_csrrw_i128(CPURISCVState *env, int csrno, Int128 *ret_value, Int128 new_value, Int128 write_mask) { RISCVException ret; - ret = riscv_csrrw_check(env, csrno, int128_nz(write_mask)); + ret = riscv_csrrw_check(env, csrno, true); if (ret != RISCV_EXCP_NONE) { return ret; } diff --git a/target/riscv/op_helper.c b/target/riscv/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/op_helper.c +++ b/target/riscv/op_helper.c @@ -XXX,XX +XXX,XX @@ target_ulong helper_csrr(CPURISCVState *env, int csr) } target_ulong val = 0; - RISCVException ret = riscv_csrrw(env, csr, &val, 0, 0); + RISCVException ret = riscv_csrr(env, csr, &val); if (ret != RISCV_EXCP_NONE) { riscv_raise_exception(env, ret, GETPC()); @@ -XXX,XX +XXX,XX @@ target_ulong helper_csrrw(CPURISCVState *env, int csr, target_ulong helper_csrr_i128(CPURISCVState *env, int csr) { Int128 rv = int128_zero(); - RISCVException ret = riscv_csrrw_i128(env, csr, &rv, - int128_zero(), - int128_zero()); + RISCVException ret = riscv_csrr_i128(env, csr, &rv); if (ret != RISCV_EXCP_NONE) { riscv_raise_exception(env, ret, GETPC()); -- 2.45.1 From: Alistair Francis <alistair.francis@wdc.com> The following changes since commit c77283dd5d79149f4e7e9edd00f65416c648ee59: Merge tag 'pull-request-2025-07-02' of https://gitlab.com/thuth/qemu into staging (2025-07-03 06:01:41 -0400) are available in the Git repository at: https://github.com/alistair23/qemu.git tags/pull-riscv-to-apply-20250704 for you to fetch changes up to dc8bffc4eb0a93d3266cea1b17f8848dea5b915c: target: riscv: Add Svrsw60t59b extension support (2025-07-04 21:09:49 +1000) ---------------------------------------------------------------- Second RISC-V PR for 10.1 * sstc extension fixes * Fix zama16b order in isa_edata_arr * Profile handling fixes * Extend PMP region up to 64 * Remove capital 'Z' CPU properties * Add missing named features * Support atomic instruction fetch (Ziccif) * Add max_satp_mode from host cpu * Extend and configure PMP region count * Fix PPN field of Translation-reponse register * Use qemu_chr_fe_write_all() in DBCN_CONSOLE_WRITE_BYTE * Fix fcvt.s.bf16 NaN box checking * Avoid infinite delay of async xmit function * Device tree reg cleanups * Add Kunminghu CPU and platform * Fix missing exit TB flow for ldff_trans * Fix migration failure when aia is configured as aplic-imsic * Fix MEPC/SEPC bit masking for IALIGN * Add a property to set vill bit on reserved usage of vsetvli instruction * Add Svrsw60t59b extension support ---------------------------------------------------------------- Alexandre Ghiti (1): target: riscv: Add Svrsw60t59b extension support Anton Blanchard (1): target/riscv: Fix fcvt.s.bf16 NaN box checking Charalampos Mitrodimas (2): target/riscv: Fix MEPC/SEPC bit masking for IALIGN tests/tcg/riscv64: Add test for MEPC bit masking Daniel Henrique Barboza (9): target/riscv/cpu.c: fix zama16b order in isa_edata_arr[] target/riscv/tcg: restrict satp_mode changes in cpu_set_profile target/riscv/tcg: decouple profile enablement from user prop target/riscv: add profile->present flag target/riscv: remove capital 'Z' CPU properties target/riscv/cpu.c: add 'sdtrig' in riscv,isa target/riscv/cpu.c: add 'ssstrict' to riscv, isa target/riscv/cpu.c: do better with 'named features' doc target/riscv: use qemu_chr_fe_write_all() in DBCN_CONSOLE_WRITE_BYTE Florian Lugou (1): hw/char: sifive_uart: Avoid infinite delay of async xmit function Huang Borong (2): target/riscv: Add BOSC's Xiangshan Kunminghu CPU hw/riscv: Initial support for BOSC's Xiangshan Kunminghu FPGA prototype Jay Chang (2): target/riscv: Extend PMP region up to 64 target/riscv: Make PMP region count configurable Jim Shu (5): target/riscv: Add the checking into stimecmp write function. hw/intc: riscv_aclint: Fix mtime write for sstc extension target/riscv: Fix VSTIP bit in sstc extension. target/riscv: Enable/Disable S/VS-mode Timer when STCE bit is changed target/riscv: support atomic instruction fetch (Ziccif) Joel Stanley (12): hw/riscv/virt: Fix clint base address type hw/riscv/virt: Use setprop_sized_cells for clint hw/riscv/virt: Use setprop_sized_cells for memory hw/riscv/virt: Use setprop_sized_cells for aplic hw/riscv/virt: Use setprop_sized_cells for aclint hw/riscv/virt: Use setprop_sized_cells for plic hw/riscv/virt: Use setprop_sized_cells for virtio hw/riscv/virt: Use setprop_sized_cells for reset hw/riscv/virt: Use setprop_sized_cells for uart hw/riscv/virt: Use setprop_sized_cells for rtc hw/riscv/virt: Use setprop_sized_cells for iommu hw/riscv/virt: Use setprop_sized_cells for pcie Max Chou (1): target/riscv: rvv: Fix missing exit TB flow for ldff_trans Meng Zhuo (1): target/riscv/kvm: add max_satp_mode from host cpu Nutty Liu (1): hw/riscv/riscv-iommu: Fix PPN field of Translation-reponse register Vasilis Liaskovitis (1): target/riscv: Add a property to set vill bit on reserved usage of vsetvli instruction liu.xuemei1@zte.com.cn (1): migration: Fix migration failure when aia is configured as aplic-imsic MAINTAINERS | 7 + docs/system/riscv/xiangshan-kunminghu.rst | 39 +++++ docs/system/target-riscv.rst | 1 + configs/devices/riscv64-softmmu/default.mak | 1 + hw/riscv/riscv-iommu-bits.h | 1 + include/hw/riscv/xiangshan_kmh.h | 68 +++++++++ target/riscv/cpu-qom.h | 1 + target/riscv/cpu.h | 19 ++- target/riscv/cpu_bits.h | 63 +++++++- target/riscv/helper.h | 2 +- target/riscv/internals.h | 27 ++++ target/riscv/time_helper.h | 1 + target/riscv/cpu_cfg_fields.h.inc | 3 + hw/char/sifive_uart.c | 6 +- hw/intc/riscv_aclint.c | 5 + hw/intc/riscv_aplic.c | 12 +- hw/intc/riscv_imsic.c | 10 +- hw/riscv/riscv-iommu.c | 9 +- hw/riscv/virt.c | 66 ++++----- hw/riscv/xiangshan_kmh.c | 220 ++++++++++++++++++++++++++++ target/riscv/cpu.c | 144 +++++++++++++++--- target/riscv/cpu_helper.c | 3 +- target/riscv/csr.c | 192 +++++++++++++++++++++++- target/riscv/fpu_helper.c | 2 +- target/riscv/kvm/kvm-cpu.c | 18 ++- target/riscv/machine.c | 3 +- target/riscv/op_helper.c | 4 +- target/riscv/pmp.c | 28 ++-- target/riscv/riscv-qmp-cmds.c | 2 +- target/riscv/tcg/tcg-cpu.c | 186 +++++++++++------------ target/riscv/time_helper.c | 65 +++++++- target/riscv/translate.c | 46 ++++-- target/riscv/vector_helper.c | 12 +- target/riscv/insn_trans/trans_rvv.c.inc | 10 +- hw/riscv/Kconfig | 9 ++ hw/riscv/meson.build | 1 + tests/data/acpi/riscv64/virt/RHCT | Bin 400 -> 416 bytes tests/tcg/riscv64/Makefile.softmmu-target | 4 + tests/tcg/riscv64/test-mepc-masking.S | 73 +++++++++ 39 files changed, 1151 insertions(+), 212 deletions(-) create mode 100644 docs/system/riscv/xiangshan-kunminghu.rst create mode 100644 include/hw/riscv/xiangshan_kmh.h create mode 100644 hw/riscv/xiangshan_kmh.c create mode 100644 tests/tcg/riscv64/test-mepc-masking.S From: Jim Shu <jim.shu@sifive.com> Preparation commit to let aclint timer to use stimecmp write function. Aclint timer doesn't call sstc() predicate so we need to check inside the stimecmp write function. Signed-off-by: Jim Shu <jim.shu@sifive.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250519143518.11086-2-jim.shu@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/time_helper.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) diff --git a/target/riscv/time_helper.c b/target/riscv/time_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/time_helper.c +++ b/target/riscv/time_helper.c @@ -XXX,XX +XXX,XX @@ void riscv_timer_write_timecmp(CPURISCVState *env, QEMUTimer *timer, { uint64_t diff, ns_diff, next; RISCVAclintMTimerState *mtimer = env->rdtime_fn_arg; - uint32_t timebase_freq = mtimer->timebase_freq; - uint64_t rtc_r = env->rdtime_fn(env->rdtime_fn_arg) + delta; + uint32_t timebase_freq; + uint64_t rtc_r; + + if (!riscv_cpu_cfg(env)->ext_sstc || !env->rdtime_fn || + !env->rdtime_fn_arg || !get_field(env->menvcfg, MENVCFG_STCE)) { + /* S/VS Timer IRQ depends on sstc extension, rdtime_fn(), and STCE. */ + return; + } + + if (timer_irq == MIP_VSTIP && + (!riscv_has_ext(env, RVH) || !get_field(env->henvcfg, HENVCFG_STCE))) { + /* VS Timer IRQ also depends on RVH and henvcfg.STCE. */ + return; + } + + timebase_freq = mtimer->timebase_freq; + rtc_r = env->rdtime_fn(env->rdtime_fn_arg) + delta; if (timecmp <= rtc_r) { /* -- 2.50.0 From: Jim Shu <jim.shu@sifive.com> When changing the mtime value, the period of [s|vs]timecmp timers should also be updated, similar to the period of mtimecmp timer. The period of the stimecmp timer is the time until the next S-mode timer IRQ. The value is calculated as "stimecmp - time". [1] It is equal to "stimecmp - mtime" since the time CSR is a read-only shadow of the memory-mapped mtime register. Thus, changing mtime value will update the period of stimecmp timer. Similarly, the period of vstimecmp timer is calculated as "vstimecmp - (mtime + htimedelta)" [2], so changing mtime value will update the period of vstimecmp timer. [1] RISC-V Priv spec ch 9.1.1. Supervisor Timer (stimecmp) Register A supervisor timer interrupt becomes pending, as reflected in the STIP bit in the mip and sip registers whenever time contains a value greater than or equal to stimecmp. [2] RISC-V Priv spec ch19.2.1. Virtual Supervisor Timer (vstimecmp) Register A virtual supervisor timer interrupt becomes pending, as reflected in the VSTIP bit in the hip register, whenever (time + htimedelta), truncated to 64 bits, contains a value greater than or equal to vstimecmp Signed-off-by: Jim Shu <jim.shu@sifive.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250519143518.11086-3-jim.shu@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/intc/riscv_aclint.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/hw/intc/riscv_aclint.c b/hw/intc/riscv_aclint.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/riscv_aclint.c +++ b/hw/intc/riscv_aclint.c @@ -XXX,XX +XXX,XX @@ #include "qemu/module.h" #include "hw/sysbus.h" #include "target/riscv/cpu.h" +#include "target/riscv/time_helper.h" #include "hw/qdev-properties.h" #include "hw/intc/riscv_aclint.h" #include "qemu/timer.h" @@ -XXX,XX +XXX,XX @@ static void riscv_aclint_mtimer_write(void *opaque, hwaddr addr, riscv_aclint_mtimer_write_timecmp(mtimer, RISCV_CPU(cpu), mtimer->hartid_base + i, mtimer->timecmp[i]); + riscv_timer_write_timecmp(env, env->stimer, env->stimecmp, 0, MIP_STIP); + riscv_timer_write_timecmp(env, env->vstimer, env->vstimecmp, + env->htimedelta, MIP_VSTIP); + } return; } -- 2.50.0 From: Jim Shu <jim.shu@sifive.com> VSTIP is only writable when both [mh]envcfg.STCE is enabled, or it will revert it's defined behavior as if sstc extension is not implemented. Signed-off-by: Jim Shu <jim.shu@sifive.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250519143518.11086-4-jim.shu@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException rmw_mip64(CPURISCVState *env, int csrno, if (riscv_cpu_cfg(env)->ext_sstc && (env->priv == PRV_M) && get_field(env->menvcfg, MENVCFG_STCE)) { /* sstc extension forbids STIP & VSTIP to be writeable in mip */ - mask = mask & ~(MIP_STIP | MIP_VSTIP); + + /* STIP is not writable when menvcfg.STCE is enabled. */ + mask = mask & ~MIP_STIP; + + /* VSTIP is not writable when both [mh]envcfg.STCE are enabled. */ + if (get_field(env->henvcfg, HENVCFG_STCE)) { + mask = mask & ~MIP_VSTIP; + } } if (mask) { -- 2.50.0 From: Jim Shu <jim.shu@sifive.com> Updating STCE will enable/disable SSTC in S-mode or/and VS-mode, so we also need to update S/VS-mode Timer and S/VSTIP bits in $mip CSR. Signed-off-by: Jim Shu <jim.shu@sifive.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250519143518.11086-5-jim.shu@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/time_helper.h | 1 + target/riscv/csr.c | 46 ++++++++++++++++++++++++++++++++++++++ target/riscv/time_helper.c | 46 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 93 insertions(+) diff --git a/target/riscv/time_helper.h b/target/riscv/time_helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/time_helper.h +++ b/target/riscv/time_helper.h @@ -XXX,XX +XXX,XX @@ void riscv_timer_write_timecmp(CPURISCVState *env, QEMUTimer *timer, uint64_t timecmp, uint64_t delta, uint32_t timer_irq); +void riscv_timer_stce_changed(CPURISCVState *env, bool is_m_mode, bool enable); void riscv_timer_init(RISCVCPU *cpu); #endif diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException write_menvcfg(CPURISCVState *env, int csrno, const RISCVCPUConfig *cfg = riscv_cpu_cfg(env); uint64_t mask = MENVCFG_FIOM | MENVCFG_CBIE | MENVCFG_CBCFE | MENVCFG_CBZE | MENVCFG_CDE; + bool stce_changed = false; if (riscv_cpu_mxl(env) == MXL_RV64) { mask |= (cfg->ext_svpbmt ? MENVCFG_PBMTE : 0) | @@ -XXX,XX +XXX,XX @@ static RISCVException write_menvcfg(CPURISCVState *env, int csrno, if ((val & MENVCFG_DTE) == 0) { env->mstatus &= ~MSTATUS_SDT; } + + if (cfg->ext_sstc && + ((env->menvcfg & MENVCFG_STCE) != (val & MENVCFG_STCE))) { + stce_changed = true; + } } env->menvcfg = (env->menvcfg & ~mask) | (val & mask); + + if (stce_changed) { + riscv_timer_stce_changed(env, true, !!(val & MENVCFG_STCE)); + } + return write_henvcfg(env, CSR_HENVCFG, env->henvcfg, ra); } @@ -XXX,XX +XXX,XX @@ static RISCVException write_menvcfgh(CPURISCVState *env, int csrno, (cfg->ext_smcdeleg ? MENVCFG_CDE : 0) | (cfg->ext_ssdbltrp ? MENVCFG_DTE : 0); uint64_t valh = (uint64_t)val << 32; + bool stce_changed = false; + + if (cfg->ext_sstc && + ((env->menvcfg & MENVCFG_STCE) != (valh & MENVCFG_STCE))) { + stce_changed = true; + } if ((valh & MENVCFG_DTE) == 0) { env->mstatus &= ~MSTATUS_SDT; } env->menvcfg = (env->menvcfg & ~mask) | (valh & mask); + + if (stce_changed) { + riscv_timer_stce_changed(env, true, !!(valh & MENVCFG_STCE)); + } + return write_henvcfgh(env, CSR_HENVCFGH, env->henvcfg >> 32, ra); } @@ -XXX,XX +XXX,XX @@ static RISCVException read_henvcfg(CPURISCVState *env, int csrno, static RISCVException write_henvcfg(CPURISCVState *env, int csrno, target_ulong val, uintptr_t ra) { + const RISCVCPUConfig *cfg = riscv_cpu_cfg(env); uint64_t mask = HENVCFG_FIOM | HENVCFG_CBIE | HENVCFG_CBCFE | HENVCFG_CBZE; RISCVException ret; + bool stce_changed = false; ret = smstateen_acc_ok(env, 0, SMSTATEEN0_HSENVCFG); if (ret != RISCV_EXCP_NONE) { @@ -XXX,XX +XXX,XX @@ static RISCVException write_henvcfg(CPURISCVState *env, int csrno, get_field(val, HENVCFG_PMM) != PMM_FIELD_RESERVED) { mask |= HENVCFG_PMM; } + + if (cfg->ext_sstc && + ((env->henvcfg & HENVCFG_STCE) != (val & HENVCFG_STCE))) { + stce_changed = true; + } } env->henvcfg = val & mask; @@ -XXX,XX +XXX,XX @@ static RISCVException write_henvcfg(CPURISCVState *env, int csrno, env->vsstatus &= ~MSTATUS_SDT; } + if (stce_changed) { + riscv_timer_stce_changed(env, false, !!(val & HENVCFG_STCE)); + } + return RISCV_EXCP_NONE; } @@ -XXX,XX +XXX,XX @@ static RISCVException read_henvcfgh(CPURISCVState *env, int csrno, static RISCVException write_henvcfgh(CPURISCVState *env, int csrno, target_ulong val, uintptr_t ra) { + const RISCVCPUConfig *cfg = riscv_cpu_cfg(env); uint64_t mask = env->menvcfg & (HENVCFG_PBMTE | HENVCFG_STCE | HENVCFG_ADUE | HENVCFG_DTE); uint64_t valh = (uint64_t)val << 32; RISCVException ret; + bool stce_changed = false; ret = smstateen_acc_ok(env, 0, SMSTATEEN0_HSENVCFG); if (ret != RISCV_EXCP_NONE) { return ret; } + + if (cfg->ext_sstc && + ((env->henvcfg & HENVCFG_STCE) != (valh & HENVCFG_STCE))) { + stce_changed = true; + } + env->henvcfg = (env->henvcfg & 0xFFFFFFFF) | (valh & mask); if ((env->henvcfg & HENVCFG_DTE) == 0) { env->vsstatus &= ~MSTATUS_SDT; } + + if (stce_changed) { + riscv_timer_stce_changed(env, false, !!(val & HENVCFG_STCE)); + } + return RISCV_EXCP_NONE; } diff --git a/target/riscv/time_helper.c b/target/riscv/time_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/time_helper.c +++ b/target/riscv/time_helper.c @@ -XXX,XX +XXX,XX @@ void riscv_timer_write_timecmp(CPURISCVState *env, QEMUTimer *timer, timer_mod(timer, next); } +/* + * When disabling xenvcfg.STCE, the S/VS Timer may be disabled at the same time. + * It is safe to call this function regardless of whether the timer has been + * deleted or not. timer_del() will do nothing if the timer has already + * been deleted. + */ +static void riscv_timer_disable_timecmp(CPURISCVState *env, QEMUTimer *timer, + uint32_t timer_irq) +{ + /* Disable S-mode Timer IRQ and HW-based STIP */ + if ((timer_irq == MIP_STIP) && !get_field(env->menvcfg, MENVCFG_STCE)) { + riscv_cpu_update_mip(env, timer_irq, BOOL_TO_MASK(0)); + timer_del(timer); + return; + } + + /* Disable VS-mode Timer IRQ and HW-based VSTIP */ + if ((timer_irq == MIP_VSTIP) && + (!get_field(env->menvcfg, MENVCFG_STCE) || + !get_field(env->henvcfg, HENVCFG_STCE))) { + env->vstime_irq = 0; + riscv_cpu_update_mip(env, 0, BOOL_TO_MASK(0)); + timer_del(timer); + return; + } +} + +/* Enable or disable S/VS-mode Timer when xenvcfg.STCE is changed */ +void riscv_timer_stce_changed(CPURISCVState *env, bool is_m_mode, bool enable) +{ + if (enable) { + riscv_timer_write_timecmp(env, env->vstimer, env->vstimecmp, + env->htimedelta, MIP_VSTIP); + } else { + riscv_timer_disable_timecmp(env, env->vstimer, MIP_VSTIP); + } + + if (is_m_mode) { + if (enable) { + riscv_timer_write_timecmp(env, env->stimer, env->stimecmp, 0, MIP_STIP); + } else { + riscv_timer_disable_timecmp(env, env->stimer, MIP_STIP); + } + } +} + void riscv_timer_init(RISCVCPU *cpu) { CPURISCVState *env; -- 2.50.0 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Put it after zalrsc and before zawrs. Cc: qemu-trivial@nongnu.org Fixes: a60ce58fd9 ("target/riscv: Support Zama16b extension") Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250522113344.823294-1-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(zaamo, PRIV_VERSION_1_12_0, ext_zaamo), ISA_EXT_DATA_ENTRY(zabha, PRIV_VERSION_1_13_0, ext_zabha), ISA_EXT_DATA_ENTRY(zacas, PRIV_VERSION_1_12_0, ext_zacas), - ISA_EXT_DATA_ENTRY(zama16b, PRIV_VERSION_1_13_0, ext_zama16b), ISA_EXT_DATA_ENTRY(zalrsc, PRIV_VERSION_1_12_0, ext_zalrsc), + ISA_EXT_DATA_ENTRY(zama16b, PRIV_VERSION_1_13_0, ext_zama16b), ISA_EXT_DATA_ENTRY(zawrs, PRIV_VERSION_1_12_0, ext_zawrs), ISA_EXT_DATA_ENTRY(zfa, PRIV_VERSION_1_12_0, ext_zfa), ISA_EXT_DATA_ENTRY(zfbfmin, PRIV_VERSION_1_12_0, ext_zfbfmin), -- 2.50.0 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> We're changing 'mmu' to true regardless of whether the profile is being enabled or not, and at the same time we're changing satp_mode to profile->enabled. This will promote a situation where we'll set mmu=on without a virtual memory mode, which is a mistake. Only touch 'mmu' and satp_mode if the profile is being enabled. Suggested-by: Andrew Jones <ajones@ventanamicro.com> Fixes: 55398025e7 ("target/riscv: add satp_mode profile support") Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Björn Töpel <bjorn@rivosinc.com> Tested-by: Björn Töpel <bjorn@rivosinc.com> Message-ID: <20250528184407.1451983-2-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void cpu_set_profile(Object *obj, Visitor *v, const char *name, if (profile->enabled) { cpu->env.priv_ver = profile->priv_spec; - } #ifndef CONFIG_USER_ONLY - if (profile->satp_mode != RISCV_PROFILE_ATTR_UNUSED) { - object_property_set_bool(obj, "mmu", true, NULL); - const char *satp_prop = satp_mode_str(profile->satp_mode, - riscv_cpu_is_32bit(cpu)); - object_property_set_bool(obj, satp_prop, profile->enabled, NULL); - } + if (profile->satp_mode != RISCV_PROFILE_ATTR_UNUSED) { + object_property_set_bool(obj, "mmu", true, NULL); + const char *satp_prop = satp_mode_str(profile->satp_mode, + riscv_cpu_is_32bit(cpu)); + object_property_set_bool(obj, satp_prop, true, NULL); + } #endif + } for (i = 0; misa_bits[i] != 0; i++) { uint32_t bit = misa_bits[i]; -- 2.50.0 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> We have code in riscv_cpu_add_profiles() to enable a profile right away in case a CPU chose the profile during its cpu_init(). But we're using the user callback option to do so, setting profile->user_set. Create a new helper that does all the grunt work to enable/disable a given profile. Use this new helper in the cases where we want a CPU to be compatible to a certain profile, leaving the user callback to be used exclusively by users. Fixes: fba92a92e3 ("target/riscv: add 'rva22u64' CPU") Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Björn Töpel <bjorn@rivosinc.com> Tested-by: Björn Töpel <bjorn@rivosinc.com> Message-ID: <20250528184407.1451983-3-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 127 +++++++++++++++++++------------------ 1 file changed, 67 insertions(+), 60 deletions(-) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static bool riscv_cpu_is_generic(Object *cpu_obj) return object_dynamic_cast(cpu_obj, TYPE_RISCV_DYNAMIC_CPU) != NULL; } +static void riscv_cpu_set_profile(RISCVCPU *cpu, + RISCVCPUProfile *profile, + bool enabled) +{ + int i, ext_offset; + + if (profile->u_parent != NULL) { + riscv_cpu_set_profile(cpu, profile->u_parent, enabled); + } + + if (profile->s_parent != NULL) { + riscv_cpu_set_profile(cpu, profile->s_parent, enabled); + } + + profile->enabled = enabled; + + if (profile->enabled) { + cpu->env.priv_ver = profile->priv_spec; + +#ifndef CONFIG_USER_ONLY + if (profile->satp_mode != RISCV_PROFILE_ATTR_UNUSED) { + object_property_set_bool(OBJECT(cpu), "mmu", true, NULL); + const char *satp_prop = satp_mode_str(profile->satp_mode, + riscv_cpu_is_32bit(cpu)); + object_property_set_bool(OBJECT(cpu), satp_prop, true, NULL); + } +#endif + } + + for (i = 0; misa_bits[i] != 0; i++) { + uint32_t bit = misa_bits[i]; + + if (!(profile->misa_ext & bit)) { + continue; + } + + if (bit == RVI && !profile->enabled) { + /* + * Disabling profiles will not disable the base + * ISA RV64I. + */ + continue; + } + + cpu_misa_ext_add_user_opt(bit, profile->enabled); + riscv_cpu_write_misa_bit(cpu, bit, profile->enabled); + } + + for (i = 0; profile->ext_offsets[i] != RISCV_PROFILE_EXT_LIST_END; i++) { + ext_offset = profile->ext_offsets[i]; + + if (profile->enabled) { + if (cpu_cfg_offset_is_named_feat(ext_offset)) { + riscv_cpu_enable_named_feat(cpu, ext_offset); + } + + cpu_bump_multi_ext_priv_ver(&cpu->env, ext_offset); + } + + cpu_cfg_ext_add_user_opt(ext_offset, profile->enabled); + isa_ext_update_enabled(cpu, ext_offset, profile->enabled); + } +} + /* * We'll get here via the following path: * @@ -XXX,XX +XXX,XX @@ static void cpu_set_profile(Object *obj, Visitor *v, const char *name, RISCVCPUProfile *profile = opaque; RISCVCPU *cpu = RISCV_CPU(obj); bool value; - int i, ext_offset; if (riscv_cpu_is_vendor(obj)) { error_setg(errp, "Profile %s is not available for vendor CPUs", @@ -XXX,XX +XXX,XX @@ static void cpu_set_profile(Object *obj, Visitor *v, const char *name, } profile->user_set = true; - profile->enabled = value; - - if (profile->u_parent != NULL) { - object_property_set_bool(obj, profile->u_parent->name, - profile->enabled, NULL); - } - - if (profile->s_parent != NULL) { - object_property_set_bool(obj, profile->s_parent->name, - profile->enabled, NULL); - } - - if (profile->enabled) { - cpu->env.priv_ver = profile->priv_spec; - -#ifndef CONFIG_USER_ONLY - if (profile->satp_mode != RISCV_PROFILE_ATTR_UNUSED) { - object_property_set_bool(obj, "mmu", true, NULL); - const char *satp_prop = satp_mode_str(profile->satp_mode, - riscv_cpu_is_32bit(cpu)); - object_property_set_bool(obj, satp_prop, true, NULL); - } -#endif - } - - for (i = 0; misa_bits[i] != 0; i++) { - uint32_t bit = misa_bits[i]; - - if (!(profile->misa_ext & bit)) { - continue; - } - if (bit == RVI && !profile->enabled) { - /* - * Disabling profiles will not disable the base - * ISA RV64I. - */ - continue; - } - - cpu_misa_ext_add_user_opt(bit, profile->enabled); - riscv_cpu_write_misa_bit(cpu, bit, profile->enabled); - } - - for (i = 0; profile->ext_offsets[i] != RISCV_PROFILE_EXT_LIST_END; i++) { - ext_offset = profile->ext_offsets[i]; - - if (profile->enabled) { - if (cpu_cfg_offset_is_named_feat(ext_offset)) { - riscv_cpu_enable_named_feat(cpu, ext_offset); - } - - cpu_bump_multi_ext_priv_ver(&cpu->env, ext_offset); - } - - cpu_cfg_ext_add_user_opt(ext_offset, profile->enabled); - isa_ext_update_enabled(cpu, ext_offset, profile->enabled); - } + riscv_cpu_set_profile(cpu, profile, value); } static void cpu_get_profile(Object *obj, Visitor *v, const char *name, @@ -XXX,XX +XXX,XX @@ static void cpu_get_profile(Object *obj, Visitor *v, const char *name, static void riscv_cpu_add_profiles(Object *cpu_obj) { for (int i = 0; riscv_profiles[i] != NULL; i++) { - const RISCVCPUProfile *profile = riscv_profiles[i]; + RISCVCPUProfile *profile = riscv_profiles[i]; object_property_add(cpu_obj, profile->name, "bool", cpu_get_profile, cpu_set_profile, @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_add_profiles(Object *cpu_obj) * case. */ if (profile->enabled) { - object_property_set_bool(cpu_obj, profile->name, true, NULL); + riscv_cpu_set_profile(RISCV_CPU(cpu_obj), profile, true); } } } -- 2.50.0 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Björn reported in [1] a case where a rv64 CPU is going through the profile code path to enable satp mode. In this case,the amount of extensions on top of the rv64 CPU made it compliant with the RVA22S64 profile during the validation of CPU 0. When the subsequent CPUs were initialized the static profile object has the 'enable' flag set, enabling the profile code path for those CPUs. This happens because we are initializing and realizing each CPU before going to the next, i.e. init and realize CPU0, then init and realize CPU1 and so on. If we change any persistent state during the validation of CPU N it will interfere with the init/realization of CPU N+1. We're using the 'enabled' profile flag to do two distinct things: inform cpu_init() that we want profile extensions to be enabled, and telling QMP that a profile is currently enabled in the CPU. We want to be flexible enough to recognize profile support for all CPUs that has the extension prerequisites, but we do not want to force the profile code path if a profile wasn't set too. Add a new 'present' flag for profiles that will coexist with the 'enabled' flag. Enabling a profile means "we want to switch on all its mandatory extensions". A profile is 'present' if we asserted during validation that the CPU has the needed prerequisites. This means that the case reported by Björn now results in RVA22S64.enabled=false and RVA22S64.present=true. QMP will recognize it as a RVA22 compliant CPU and we won't force the CPU into the profile path. [1] https://lore.kernel.org/qemu-riscv/87y0usiz22.fsf@all.your.base.are.belong.to.us/ Reported-by: Björn Töpel <bjorn@kernel.org> Fixes: 2af005d610 ("target/riscv/tcg: validate profiles during finalize") Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Björn Töpel <bjorn@rivosinc.com> Tested-by: Björn Töpel <bjorn@rivosinc.com> Message-ID: <20250528184407.1451983-4-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 15 +++++++++++++++ target/riscv/riscv-qmp-cmds.c | 2 +- target/riscv/tcg/tcg-cpu.c | 11 +++-------- 3 files changed, 19 insertions(+), 9 deletions(-) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct riscv_cpu_profile { struct riscv_cpu_profile *s_parent; const char *name; uint32_t misa_ext; + /* + * The profile is enabled/disabled via command line or + * via cpu_init(). Enabling a profile will add all its + * mandatory extensions in the CPU during init(). + */ bool enabled; + /* + * The profile is present in the CPU, i.e. the current set of + * CPU extensions complies with it. A profile can be enabled + * and not present (e.g. the user disabled a mandatory extension) + * and the other way around (e.g. all mandatory extensions are + * present in a non-profile CPU). + * + * QMP uses this flag. + */ + bool present; bool user_set; int priv_spec; int satp_mode; diff --git a/target/riscv/riscv-qmp-cmds.c b/target/riscv/riscv-qmp-cmds.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/riscv-qmp-cmds.c +++ b/target/riscv/riscv-qmp-cmds.c @@ -XXX,XX +XXX,XX @@ static void riscv_obj_add_profiles_qdict(Object *obj, QDict *qdict_out) for (int i = 0; riscv_profiles[i] != NULL; i++) { profile = riscv_profiles[i]; - value = QOBJECT(qbool_from_bool(profile->enabled)); + value = QOBJECT(qbool_from_bool(profile->present)); qdict_put_obj(qdict_out, profile->name, value); } diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_check_parent_profile(RISCVCPU *cpu, RISCVCPUProfile *profile, RISCVCPUProfile *parent) { - const char *parent_name; - bool parent_enabled; - - if (!profile->enabled || !parent) { + if (!profile->present || !parent) { return; } - parent_name = parent->name; - parent_enabled = object_property_get_bool(OBJECT(cpu), parent_name, NULL); - profile->enabled = parent_enabled; + profile->present = parent->present; } static void riscv_cpu_validate_profile(RISCVCPU *cpu, @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_validate_profile(RISCVCPU *cpu, } } - profile->enabled = profile_impl; + profile->present = profile_impl; riscv_cpu_check_parent_profile(cpu, profile, profile->u_parent); riscv_cpu_check_parent_profile(cpu, profile, profile->s_parent); -- 2.50.0 From: Jay Chang <jay.chang@sifive.com> According to the RISC-V Privileged Specification (version >1.12), RV32 supports 16 CSRs (pmpcfg0–pmpcfg15) to configure 64 PMP regions (pmpaddr0–pmpaddr63). Signed-off-by: Jay Chang <jay.chang@sifive.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20250522081236.4050-2-jay.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu_bits.h | 60 +++++++++++++++++++ target/riscv/csr.c | 124 +++++++++++++++++++++++++++++++++++++++- 2 files changed, 182 insertions(+), 2 deletions(-) diff --git a/target/riscv/cpu_bits.h b/target/riscv/cpu_bits.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_bits.h +++ b/target/riscv/cpu_bits.h @@ -XXX,XX +XXX,XX @@ #define CSR_PMPCFG1 0x3a1 #define CSR_PMPCFG2 0x3a2 #define CSR_PMPCFG3 0x3a3 +#define CSR_PMPCFG4 0x3a4 +#define CSR_PMPCFG5 0x3a5 +#define CSR_PMPCFG6 0x3a6 +#define CSR_PMPCFG7 0x3a7 +#define CSR_PMPCFG8 0x3a8 +#define CSR_PMPCFG9 0x3a9 +#define CSR_PMPCFG10 0x3aa +#define CSR_PMPCFG11 0x3ab +#define CSR_PMPCFG12 0x3ac +#define CSR_PMPCFG13 0x3ad +#define CSR_PMPCFG14 0x3ae +#define CSR_PMPCFG15 0x3af #define CSR_PMPADDR0 0x3b0 #define CSR_PMPADDR1 0x3b1 #define CSR_PMPADDR2 0x3b2 @@ -XXX,XX +XXX,XX @@ #define CSR_PMPADDR13 0x3bd #define CSR_PMPADDR14 0x3be #define CSR_PMPADDR15 0x3bf +#define CSR_PMPADDR16 0x3c0 +#define CSR_PMPADDR17 0x3c1 +#define CSR_PMPADDR18 0x3c2 +#define CSR_PMPADDR19 0x3c3 +#define CSR_PMPADDR20 0x3c4 +#define CSR_PMPADDR21 0x3c5 +#define CSR_PMPADDR22 0x3c6 +#define CSR_PMPADDR23 0x3c7 +#define CSR_PMPADDR24 0x3c8 +#define CSR_PMPADDR25 0x3c9 +#define CSR_PMPADDR26 0x3ca +#define CSR_PMPADDR27 0x3cb +#define CSR_PMPADDR28 0x3cc +#define CSR_PMPADDR29 0x3cd +#define CSR_PMPADDR30 0x3ce +#define CSR_PMPADDR31 0x3cf +#define CSR_PMPADDR32 0x3d0 +#define CSR_PMPADDR33 0x3d1 +#define CSR_PMPADDR34 0x3d2 +#define CSR_PMPADDR35 0x3d3 +#define CSR_PMPADDR36 0x3d4 +#define CSR_PMPADDR37 0x3d5 +#define CSR_PMPADDR38 0x3d6 +#define CSR_PMPADDR39 0x3d7 +#define CSR_PMPADDR40 0x3d8 +#define CSR_PMPADDR41 0x3d9 +#define CSR_PMPADDR42 0x3da +#define CSR_PMPADDR43 0x3db +#define CSR_PMPADDR44 0x3dc +#define CSR_PMPADDR45 0x3dd +#define CSR_PMPADDR46 0x3de +#define CSR_PMPADDR47 0x3df +#define CSR_PMPADDR48 0x3e0 +#define CSR_PMPADDR49 0x3e1 +#define CSR_PMPADDR50 0x3e2 +#define CSR_PMPADDR51 0x3e3 +#define CSR_PMPADDR52 0x3e4 +#define CSR_PMPADDR53 0x3e5 +#define CSR_PMPADDR54 0x3e6 +#define CSR_PMPADDR55 0x3e7 +#define CSR_PMPADDR56 0x3e8 +#define CSR_PMPADDR57 0x3e9 +#define CSR_PMPADDR58 0x3ea +#define CSR_PMPADDR59 0x3eb +#define CSR_PMPADDR60 0x3ec +#define CSR_PMPADDR61 0x3ed +#define CSR_PMPADDR62 0x3ee +#define CSR_PMPADDR63 0x3ef /* RNMI */ #define CSR_MNSCRATCH 0x740 diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ riscv_csr_operations csr_ops[CSR_TABLE_SIZE] = { [CSR_PMPCFG1] = { "pmpcfg1", pmp, read_pmpcfg, write_pmpcfg }, [CSR_PMPCFG2] = { "pmpcfg2", pmp, read_pmpcfg, write_pmpcfg }, [CSR_PMPCFG3] = { "pmpcfg3", pmp, read_pmpcfg, write_pmpcfg }, + [CSR_PMPCFG4] = { "pmpcfg4", pmp, read_pmpcfg, write_pmpcfg, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPCFG5] = { "pmpcfg5", pmp, read_pmpcfg, write_pmpcfg, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPCFG6] = { "pmpcfg6", pmp, read_pmpcfg, write_pmpcfg, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPCFG7] = { "pmpcfg7", pmp, read_pmpcfg, write_pmpcfg, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPCFG8] = { "pmpcfg8", pmp, read_pmpcfg, write_pmpcfg, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPCFG9] = { "pmpcfg9", pmp, read_pmpcfg, write_pmpcfg, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPCFG10] = { "pmpcfg10", pmp, read_pmpcfg, write_pmpcfg, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPCFG11] = { "pmpcfg11", pmp, read_pmpcfg, write_pmpcfg, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPCFG12] = { "pmpcfg12", pmp, read_pmpcfg, write_pmpcfg, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPCFG13] = { "pmpcfg13", pmp, read_pmpcfg, write_pmpcfg, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPCFG14] = { "pmpcfg14", pmp, read_pmpcfg, write_pmpcfg, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPCFG15] = { "pmpcfg15", pmp, read_pmpcfg, write_pmpcfg, + .min_priv_ver = PRIV_VERSION_1_12_0 }, [CSR_PMPADDR0] = { "pmpaddr0", pmp, read_pmpaddr, write_pmpaddr }, [CSR_PMPADDR1] = { "pmpaddr1", pmp, read_pmpaddr, write_pmpaddr }, [CSR_PMPADDR2] = { "pmpaddr2", pmp, read_pmpaddr, write_pmpaddr }, @@ -XXX,XX +XXX,XX @@ riscv_csr_operations csr_ops[CSR_TABLE_SIZE] = { [CSR_PMPADDR11] = { "pmpaddr11", pmp, read_pmpaddr, write_pmpaddr }, [CSR_PMPADDR12] = { "pmpaddr12", pmp, read_pmpaddr, write_pmpaddr }, [CSR_PMPADDR13] = { "pmpaddr13", pmp, read_pmpaddr, write_pmpaddr }, - [CSR_PMPADDR14] = { "pmpaddr14", pmp, read_pmpaddr, write_pmpaddr }, - [CSR_PMPADDR15] = { "pmpaddr15", pmp, read_pmpaddr, write_pmpaddr }, + [CSR_PMPADDR14] = { "pmpaddr14", pmp, read_pmpaddr, write_pmpaddr }, + [CSR_PMPADDR15] = { "pmpaddr15", pmp, read_pmpaddr, write_pmpaddr }, + [CSR_PMPADDR16] = { "pmpaddr16", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR17] = { "pmpaddr17", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR18] = { "pmpaddr18", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR19] = { "pmpaddr19", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR20] = { "pmpaddr20", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR21] = { "pmpaddr21", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR22] = { "pmpaddr22", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR23] = { "pmpaddr23", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR24] = { "pmpaddr24", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR25] = { "pmpaddr25", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR26] = { "pmpaddr26", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR27] = { "pmpaddr27", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR28] = { "pmpaddr28", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR29] = { "pmpaddr29", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR30] = { "pmpaddr30", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR31] = { "pmpaddr31", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR32] = { "pmpaddr32", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR33] = { "pmpaddr33", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR34] = { "pmpaddr34", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR35] = { "pmpaddr35", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR36] = { "pmpaddr36", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR37] = { "pmpaddr37", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR38] = { "pmpaddr38", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR39] = { "pmpaddr39", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR40] = { "pmpaddr40", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR41] = { "pmpaddr41", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR42] = { "pmpaddr42", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR43] = { "pmpaddr43", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR44] = { "pmpaddr44", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR45] = { "pmpaddr45", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR46] = { "pmpaddr46", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR47] = { "pmpaddr47", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR48] = { "pmpaddr48", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR49] = { "pmpaddr49", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR50] = { "pmpaddr50", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR51] = { "pmpaddr51", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR52] = { "pmpaddr52", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR53] = { "pmpaddr53", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR54] = { "pmpaddr54", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR55] = { "pmpaddr55", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR56] = { "pmpaddr56", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR57] = { "pmpaddr57", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR58] = { "pmpaddr58", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR59] = { "pmpaddr59", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR60] = { "pmpaddr60", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR61] = { "pmpaddr61", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR62] = { "pmpaddr62", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR63] = { "pmpaddr63", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, /* Debug CSRs */ [CSR_TSELECT] = { "tselect", debug, read_tselect, write_tselect }, -- 2.50.0 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> These properties were deprecated in QEMU 8.2, commit 8043effd9b. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250530134608.1806922-1-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 1 - target/riscv/cpu.c | 17 ----------------- target/riscv/tcg/tcg-cpu.c | 31 +------------------------------ 3 files changed, 1 insertion(+), 48 deletions(-) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ extern const RISCVCPUMultiExtConfig riscv_cpu_extensions[]; extern const RISCVCPUMultiExtConfig riscv_cpu_vendor_exts[]; extern const RISCVCPUMultiExtConfig riscv_cpu_experimental_exts[]; extern const RISCVCPUMultiExtConfig riscv_cpu_named_features[]; -extern const RISCVCPUMultiExtConfig riscv_cpu_deprecated_exts[]; typedef struct isa_ext_data { const char *name; diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const RISCVCPUMultiExtConfig riscv_cpu_named_features[] = { { }, }; -/* Deprecated entries marked for future removal */ -const RISCVCPUMultiExtConfig riscv_cpu_deprecated_exts[] = { - MULTI_EXT_CFG_BOOL("Zifencei", ext_zifencei, true), - MULTI_EXT_CFG_BOOL("Zicsr", ext_zicsr, true), - MULTI_EXT_CFG_BOOL("Zihintntl", ext_zihintntl, true), - MULTI_EXT_CFG_BOOL("Zihintpause", ext_zihintpause, true), - MULTI_EXT_CFG_BOOL("Zawrs", ext_zawrs, true), - MULTI_EXT_CFG_BOOL("Zfa", ext_zfa, true), - MULTI_EXT_CFG_BOOL("Zfh", ext_zfh, false), - MULTI_EXT_CFG_BOOL("Zfhmin", ext_zfhmin, false), - MULTI_EXT_CFG_BOOL("Zve32f", ext_zve32f, false), - MULTI_EXT_CFG_BOOL("Zve64f", ext_zve64f, false), - MULTI_EXT_CFG_BOOL("Zve64d", ext_zve64d, false), - - { }, -}; - static void cpu_set_prop_err(RISCVCPU *cpu, const char *propname, Error **errp) { diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_add_profiles(Object *cpu_obj) } } -static bool cpu_ext_is_deprecated(const char *ext_name) -{ - return isupper(ext_name[0]); -} - -/* - * String will be allocated in the heap. Caller is responsible - * for freeing it. - */ -static char *cpu_ext_to_lower(const char *ext_name) -{ - char *ret = g_malloc0(strlen(ext_name) + 1); - - strcpy(ret, ext_name); - ret[0] = tolower(ret[0]); - - return ret; -} - static void cpu_set_multi_ext_cfg(Object *obj, Visitor *v, const char *name, void *opaque, Error **errp) { @@ -XXX,XX +XXX,XX @@ static void cpu_set_multi_ext_cfg(Object *obj, Visitor *v, const char *name, return; } - if (cpu_ext_is_deprecated(multi_ext_cfg->name)) { - g_autofree char *lower = cpu_ext_to_lower(multi_ext_cfg->name); - - warn_report("CPU property '%s' is deprecated. Please use '%s' instead", - multi_ext_cfg->name, lower); - } - cpu_cfg_ext_add_user_opt(multi_ext_cfg->offset, value); prev_val = isa_ext_is_enabled(cpu, multi_ext_cfg->offset); @@ -XXX,XX +XXX,XX @@ static void cpu_add_multi_ext_prop(Object *cpu_obj, const RISCVCPUMultiExtConfig *multi_cfg) { bool generic_cpu = riscv_cpu_is_generic(cpu_obj); - bool deprecated_ext = cpu_ext_is_deprecated(multi_cfg->name); object_property_add(cpu_obj, multi_cfg->name, "bool", cpu_get_multi_ext_cfg, cpu_set_multi_ext_cfg, NULL, (void *)multi_cfg); - if (!generic_cpu || deprecated_ext) { + if (!generic_cpu) { return; } @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_add_user_properties(Object *obj) riscv_cpu_add_multiext_prop_array(obj, riscv_cpu_vendor_exts); riscv_cpu_add_multiext_prop_array(obj, riscv_cpu_experimental_exts); - riscv_cpu_add_multiext_prop_array(obj, riscv_cpu_deprecated_exts); - riscv_cpu_add_profiles(obj); } -- 2.50.0 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> We have support for sdtrig for awhile but we are not advertising it. It is enabled by default via the 'debug' flag. Use the same flag to also advertise sdtrig. Add an exception in disable_priv_spec_isa_exts() to avoid spamming warnings for 'sdtrig' for vendor CPUs like sifive_u. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250604174329.1147549-2-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 1 + target/riscv/tcg/tcg-cpu.c | 9 +++++++++ tests/data/acpi/riscv64/virt/RHCT | Bin 400 -> 406 bytes 3 files changed, 10 insertions(+) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(zvkt, PRIV_VERSION_1_12_0, ext_zvkt), ISA_EXT_DATA_ENTRY(zhinx, PRIV_VERSION_1_12_0, ext_zhinx), ISA_EXT_DATA_ENTRY(zhinxmin, PRIV_VERSION_1_12_0, ext_zhinxmin), + ISA_EXT_DATA_ENTRY(sdtrig, PRIV_VERSION_1_12_0, debug), ISA_EXT_DATA_ENTRY(shcounterenw, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(sha, PRIV_VERSION_1_12_0, ext_sha), ISA_EXT_DATA_ENTRY(shgatpa, PRIV_VERSION_1_12_0, has_priv_1_12), diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_disable_priv_spec_isa_exts(RISCVCPU *cpu) continue; } + /* + * cpu.debug = true is marked as 'sdtrig', priv spec 1.12. + * Skip this warning since existing CPUs with older priv + * spec and debug = true will be impacted. + */ + if (!strcmp(edata->name, "sdtrig")) { + continue; + } + isa_ext_update_enabled(cpu, edata->ext_enable_offset, false); /* diff --git a/tests/data/acpi/riscv64/virt/RHCT b/tests/data/acpi/riscv64/virt/RHCT index XXXXXXX..XXXXXXX 100644 Binary files a/tests/data/acpi/riscv64/virt/RHCT and b/tests/data/acpi/riscv64/virt/RHCT differ -- 2.50.0 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> 'ssstrict' is a RVA23 profile-defined extension defined as follows: "No non-conforming extensions are present. Attempts to execute unimplemented opcodes or access unimplemented CSRs in the standard or reserved encoding spaces raises an illegal instruction exception that results in a contained trap to the supervisor-mode trap handler." In short, we need to throw an exception when accessing unimplemented CSRs or opcodes. We do that, so let's advertise it. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Message-ID: <20250529202315.1684198-3-dbarboza@ventanamicro.com> Message-ID: <20250604174329.1147549-3-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 1 + tests/data/acpi/riscv64/virt/RHCT | Bin 406 -> 416 bytes 2 files changed, 1 insertion(+) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(ssnpm, PRIV_VERSION_1_13_0, ext_ssnpm), ISA_EXT_DATA_ENTRY(sspm, PRIV_VERSION_1_13_0, ext_sspm), ISA_EXT_DATA_ENTRY(ssstateen, PRIV_VERSION_1_12_0, ext_ssstateen), + ISA_EXT_DATA_ENTRY(ssstrict, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(sstc, PRIV_VERSION_1_12_0, ext_sstc), ISA_EXT_DATA_ENTRY(sstvala, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(sstvecd, PRIV_VERSION_1_12_0, has_priv_1_12), diff --git a/tests/data/acpi/riscv64/virt/RHCT b/tests/data/acpi/riscv64/virt/RHCT index XXXXXXX..XXXXXXX 100644 Binary files a/tests/data/acpi/riscv64/virt/RHCT and b/tests/data/acpi/riscv64/virt/RHCT differ -- 2.50.0 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Most of the named features are added directly in isa_edata_arr[], some of them are also added in riscv_cpu_named_features(). There is a reason for that, and the existing docs can do better explaining it. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20250529202315.1684198-4-dbarboza@ventanamicro.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250604174329.1147549-4-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const RISCVCPUMultiExtConfig riscv_cpu_experimental_exts[] = { * 'Named features' is the name we give to extensions that we * don't want to expose to users. They are either immutable * (always enabled/disable) or they'll vary depending on - * the resulting CPU state. They have riscv,isa strings - * and priv_ver like regular extensions. + * the resulting CPU state. + * + * Some of them are always enabled depending on priv version + * of the CPU and are declared directly in isa_edata_arr[]. + * The ones listed here have special checks during finalize() + * time and require their own flags like regular extensions. + * See riscv_cpu_update_named_features() for more info. */ const RISCVCPUMultiExtConfig riscv_cpu_named_features[] = { MULTI_EXT_CFG_BOOL("zic64b", ext_zic64b, true), MULTI_EXT_CFG_BOOL("ssstateen", ext_ssstateen, true), MULTI_EXT_CFG_BOOL("sha", ext_sha, true), + + /* + * 'ziccrse' has its own flag because the KVM driver + * wants to enable/disable it on its own accord. + */ MULTI_EXT_CFG_BOOL("ziccrse", ext_ziccrse, true), { }, -- 2.50.0 From: Jim Shu <jim.shu@sifive.com> Support 4-byte atomic instruction fetch when instruction is natural aligned. Current implementation is not atomic because it loads instruction twice for first and last 2 bytes. We load 4 bytes at once to keep the atomicity. This instruction preload method only applys when instruction is 4-byte aligned. If instruction is unaligned, it could be across pages so that preload will trigger additional page fault. We encounter this issue when doing pressure test of enabling & disabling Linux kernel ftrace. Ftrace with kernel preemption requires concurrent modification and execution of instruction, so non-atomic instruction fetch will cause the race condition. We may fetch the wrong instruction which is the mixing of 2 instructions. Also, RISC-V Profile wants to provide this feature by HW. RVA20U64 Ziccif protects the atomicity of instruction fetch when it is natural aligned. This commit depends on the atomic read support of translator_ld in the commit 6a9dfe1984b0c593fb0ddb52d4e70832e6201dd6. Signed-off-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250508094838.19394-1-jim.shu@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/translate.c | 46 +++++++++++++++++++++++++++++----------- 1 file changed, 34 insertions(+), 12 deletions(-) diff --git a/target/riscv/translate.c b/target/riscv/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/translate.c +++ b/target/riscv/translate.c @@ -XXX,XX +XXX,XX @@ const RISCVDecoder decoder_table[] = { const size_t decoder_table_size = ARRAY_SIZE(decoder_table); -static void decode_opc(CPURISCVState *env, DisasContext *ctx, uint16_t opcode) +static void decode_opc(CPURISCVState *env, DisasContext *ctx) { + uint32_t opcode; + bool pc_is_4byte_align = ((ctx->base.pc_next % 4) == 0); + ctx->virt_inst_excp = false; - ctx->cur_insn_len = insn_len(opcode); + if (pc_is_4byte_align) { + /* + * Load 4 bytes at once to make instruction fetch atomically. + * + * Note: When pc is 4-byte aligned, 4-byte instruction wouldn't be + * across pages. We could preload 4 bytes instruction no matter + * real one is 2 or 4 bytes. Instruction preload wouldn't trigger + * additional page fault. + */ + opcode = translator_ldl(env, &ctx->base, ctx->base.pc_next); + } else { + /* + * For unaligned pc, instruction preload may trigger additional + * page fault so we only load 2 bytes here. + */ + opcode = (uint32_t) translator_lduw(env, &ctx->base, ctx->base.pc_next); + } + ctx->ol = ctx->xl; + + ctx->cur_insn_len = insn_len((uint16_t)opcode); /* Check for compressed insn */ if (ctx->cur_insn_len == 2) { - ctx->opcode = opcode; + ctx->opcode = (uint16_t)opcode; /* * The Zca extension is added as way to refer to instructions in the C * extension that do not include the floating-point loads and stores @@ -XXX,XX +XXX,XX @@ static void decode_opc(CPURISCVState *env, DisasContext *ctx, uint16_t opcode) return; } } else { - uint32_t opcode32 = opcode; - opcode32 = deposit32(opcode32, 16, 16, - translator_lduw(env, &ctx->base, - ctx->base.pc_next + 2)); - ctx->opcode = opcode32; + if (!pc_is_4byte_align) { + /* Load last 2 bytes of instruction here */ + opcode = deposit32(opcode, 16, 16, + translator_lduw(env, &ctx->base, + ctx->base.pc_next + 2)); + } + ctx->opcode = opcode; for (guint i = 0; i < ctx->decoders->len; ++i) { riscv_cpu_decode_fn func = g_ptr_array_index(ctx->decoders, i); - if (func(ctx, opcode32)) { + if (func(ctx, opcode)) { return; } } @@ -XXX,XX +XXX,XX @@ static void riscv_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) { DisasContext *ctx = container_of(dcbase, DisasContext, base); CPURISCVState *env = cpu_env(cpu); - uint16_t opcode16 = translator_lduw(env, &ctx->base, ctx->base.pc_next); - ctx->ol = ctx->xl; - decode_opc(env, ctx, opcode16); + decode_opc(env, ctx); ctx->base.pc_next += ctx->cur_insn_len; /* -- 2.50.0 From: Meng Zhuo <mengzhuo@iscas.ac.cn> This patch adds max_satp_mode from host kvm cpu setting. Tested on: Milkv Megrez (Eswin 7700x) Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2931 Signed-off-by: Meng Zhuo <mengzhuo@iscas.ac.cn> Message-ID: <20250606034250.181707-1-mengzhuo@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/kvm/kvm-cpu.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/target/riscv/kvm/kvm-cpu.c b/target/riscv/kvm/kvm-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/kvm/kvm-cpu.c +++ b/target/riscv/kvm/kvm-cpu.c @@ -XXX,XX +XXX,XX @@ static void kvm_riscv_destroy_scratch_vcpu(KVMScratchCPU *scratch) close(scratch->kvmfd); } +static void kvm_riscv_init_max_satp_mode(RISCVCPU *cpu, KVMScratchCPU *kvmcpu) +{ + struct kvm_one_reg reg; + int ret; + + reg.id = RISCV_CONFIG_REG(satp_mode); + reg.addr = (uint64_t)&cpu->cfg.max_satp_mode; + ret = ioctl(kvmcpu->cpufd, KVM_GET_ONE_REG, &reg); + if (ret != 0) { + error_report("Unable to retrieve satp mode from host, error %d", ret); + } +} + static void kvm_riscv_init_machine_ids(RISCVCPU *cpu, KVMScratchCPU *kvmcpu) { struct kvm_one_reg reg; @@ -XXX,XX +XXX,XX @@ static void riscv_init_kvm_registers(Object *cpu_obj) kvm_riscv_init_machine_ids(cpu, &kvmcpu); kvm_riscv_init_misa_ext_mask(cpu, &kvmcpu); kvm_riscv_init_cfg(cpu, &kvmcpu); + kvm_riscv_init_max_satp_mode(cpu, &kvmcpu); kvm_riscv_destroy_scratch_vcpu(&kvmcpu); } @@ -XXX,XX +XXX,XX @@ static bool kvm_cpu_realize(CPUState *cs, Error **errp) } } - return true; + return true; } void riscv_kvm_cpu_finalize_features(RISCVCPU *cpu, Error **errp) -- 2.50.0 From: Jay Chang <jay.chang@sifive.com> Previously, the number of PMP regions was hardcoded to 16 in QEMU. This patch replaces the fixed value with a new `pmp_regions` field, allowing platforms to configure the number of PMP regions. If no specific value is provided, the default number of PMP regions remains 16 to preserve the existing behavior. A new CPU parameter num-pmp-regions has been introduced to the QEMU command line. For example: -cpu rv64, g=true, c=true, pmp=true, num-pmp-regions=8 Signed-off-by: Jay Chang <jay.chang@sifive.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250606072525.17313-3-jay.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 3 +- target/riscv/cpu_cfg_fields.h.inc | 1 + target/riscv/cpu.c | 48 +++++++++++++++++++++++++++++-- target/riscv/csr.c | 5 +++- target/riscv/machine.c | 3 +- target/riscv/pmp.c | 28 ++++++++++++------ 6 files changed, 74 insertions(+), 14 deletions(-) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ extern RISCVCPUImpliedExtsRule *riscv_multi_ext_implied_rules[]; #define MMU_USER_IDX 3 -#define MAX_RISCV_PMPS (16) +#define MAX_RISCV_PMPS (64) +#define OLD_MAX_RISCV_PMPS (16) #if !defined(CONFIG_USER_ONLY) #include "pmp.h" diff --git a/target/riscv/cpu_cfg_fields.h.inc b/target/riscv/cpu_cfg_fields.h.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_cfg_fields.h.inc +++ b/target/riscv/cpu_cfg_fields.h.inc @@ -XXX,XX +XXX,XX @@ TYPED_FIELD(uint16_t, elen, 0) TYPED_FIELD(uint16_t, cbom_blocksize, 0) TYPED_FIELD(uint16_t, cbop_blocksize, 0) TYPED_FIELD(uint16_t, cboz_blocksize, 0) +TYPED_FIELD(uint8_t, pmp_regions, 0) TYPED_FIELD(int8_t, max_satp_mode, -1) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_init(Object *obj) cpu->cfg.cbom_blocksize = 64; cpu->cfg.cbop_blocksize = 64; cpu->cfg.cboz_blocksize = 64; + cpu->cfg.pmp_regions = 16; cpu->env.vext_ver = VEXT_VERSION_1_00_0; cpu->cfg.max_satp_mode = -1; @@ -XXX,XX +XXX,XX @@ static const PropertyInfo prop_pmp = { .set = prop_pmp_set, }; +static void prop_num_pmp_regions_set(Object *obj, Visitor *v, const char *name, + void *opaque, Error **errp) +{ + RISCVCPU *cpu = RISCV_CPU(obj); + uint8_t value; + + visit_type_uint8(v, name, &value, errp); + + if (cpu->cfg.pmp_regions != value && riscv_cpu_is_vendor(obj)) { + cpu_set_prop_err(cpu, name, errp); + return; + } + + if (cpu->env.priv_ver < PRIV_VERSION_1_12_0 && value > OLD_MAX_RISCV_PMPS) { + error_setg(errp, "Number of PMP regions exceeds maximum available"); + return; + } else if (value > MAX_RISCV_PMPS) { + error_setg(errp, "Number of PMP regions exceeds maximum available"); + return; + } + + cpu_option_add_user_setting(name, value); + cpu->cfg.pmp_regions = value; +} + +static void prop_num_pmp_regions_get(Object *obj, Visitor *v, const char *name, + void *opaque, Error **errp) +{ + uint8_t value = RISCV_CPU(obj)->cfg.pmp_regions; + + visit_type_uint8(v, name, &value, errp); +} + +static const PropertyInfo prop_num_pmp_regions = { + .type = "uint8", + .description = "num-pmp-regions", + .get = prop_num_pmp_regions_get, + .set = prop_num_pmp_regions_set, +}; + static int priv_spec_from_str(const char *priv_spec_str) { int priv_version = -1; @@ -XXX,XX +XXX,XX @@ static const Property riscv_cpu_properties[] = { {.name = "mmu", .info = &prop_mmu}, {.name = "pmp", .info = &prop_pmp}, + {.name = "num-pmp-regions", .info = &prop_num_pmp_regions}, {.name = "priv_spec", .info = &prop_priv_spec}, {.name = "vext_spec", .info = &prop_vext_spec}, @@ -XXX,XX +XXX,XX @@ static const TypeInfo riscv_cpu_type_infos[] = { .cfg.max_satp_mode = VM_1_10_MBARE, .cfg.ext_zifencei = true, .cfg.ext_zicsr = true, - .cfg.pmp = true + .cfg.pmp = true, + .cfg.pmp_regions = 8 ), DEFINE_ABSTRACT_RISCV_CPU(TYPE_RISCV_CPU_SIFIVE_U, TYPE_RISCV_VENDOR_CPU, @@ -XXX,XX +XXX,XX @@ static const TypeInfo riscv_cpu_type_infos[] = { .cfg.ext_zifencei = true, .cfg.ext_zicsr = true, .cfg.mmu = true, - .cfg.pmp = true + .cfg.pmp = true, + .cfg.pmp_regions = 8 ), #if defined(TARGET_RISCV32) || \ diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException dbltrp_hmode(CPURISCVState *env, int csrno) static RISCVException pmp(CPURISCVState *env, int csrno) { if (riscv_cpu_cfg(env)->pmp) { - if (csrno <= CSR_PMPCFG3) { + int max_pmpcfg = (env->priv_ver >= PRIV_VERSION_1_12_0) ? ++ CSR_PMPCFG15 : CSR_PMPCFG3; + + if (csrno <= max_pmpcfg) { uint32_t reg_index = csrno - CSR_PMPCFG0; /* TODO: RV128 restriction check */ diff --git a/target/riscv/machine.c b/target/riscv/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/machine.c +++ b/target/riscv/machine.c @@ -XXX,XX +XXX,XX @@ static int pmp_post_load(void *opaque, int version_id) RISCVCPU *cpu = opaque; CPURISCVState *env = &cpu->env; int i; + uint8_t pmp_regions = riscv_cpu_cfg(env)->pmp_regions; - for (i = 0; i < MAX_RISCV_PMPS; i++) { + for (i = 0; i < pmp_regions; i++) { pmp_update_rule_addr(env, i); } pmp_update_rule_nums(env); diff --git a/target/riscv/pmp.c b/target/riscv/pmp.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/pmp.c +++ b/target/riscv/pmp.c @@ -XXX,XX +XXX,XX @@ uint32_t pmp_get_num_rules(CPURISCVState *env) */ static inline uint8_t pmp_read_cfg(CPURISCVState *env, uint32_t pmp_index) { - if (pmp_index < MAX_RISCV_PMPS) { + uint8_t pmp_regions = riscv_cpu_cfg(env)->pmp_regions; + + if (pmp_index < pmp_regions) { return env->pmp_state.pmp[pmp_index].cfg_reg; } @@ -XXX,XX +XXX,XX @@ static inline uint8_t pmp_read_cfg(CPURISCVState *env, uint32_t pmp_index) */ static bool pmp_write_cfg(CPURISCVState *env, uint32_t pmp_index, uint8_t val) { - if (pmp_index < MAX_RISCV_PMPS) { + uint8_t pmp_regions = riscv_cpu_cfg(env)->pmp_regions; + + if (pmp_index < pmp_regions) { if (env->pmp_state.pmp[pmp_index].cfg_reg == val) { /* no change */ return false; @@ -XXX,XX +XXX,XX @@ void pmp_update_rule_addr(CPURISCVState *env, uint32_t pmp_index) void pmp_update_rule_nums(CPURISCVState *env) { int i; + uint8_t pmp_regions = riscv_cpu_cfg(env)->pmp_regions; env->pmp_state.num_rules = 0; - for (i = 0; i < MAX_RISCV_PMPS; i++) { + for (i = 0; i < pmp_regions; i++) { const uint8_t a_field = pmp_get_a_field(env->pmp_state.pmp[i].cfg_reg); if (PMP_AMATCH_OFF != a_field) { @@ -XXX,XX +XXX,XX @@ bool pmp_hart_has_privs(CPURISCVState *env, hwaddr addr, int pmp_size = 0; hwaddr s = 0; hwaddr e = 0; + uint8_t pmp_regions = riscv_cpu_cfg(env)->pmp_regions; /* Short cut if no rules */ if (0 == pmp_get_num_rules(env)) { @@ -XXX,XX +XXX,XX @@ bool pmp_hart_has_privs(CPURISCVState *env, hwaddr addr, * 1.10 draft priv spec states there is an implicit order * from low to high */ - for (i = 0; i < MAX_RISCV_PMPS; i++) { + for (i = 0; i < pmp_regions; i++) { s = pmp_is_in_range(env, i, addr); e = pmp_is_in_range(env, i, addr + pmp_size - 1); @@ -XXX,XX +XXX,XX @@ void pmpaddr_csr_write(CPURISCVState *env, uint32_t addr_index, { trace_pmpaddr_csr_write(env->mhartid, addr_index, val); bool is_next_cfg_tor = false; + uint8_t pmp_regions = riscv_cpu_cfg(env)->pmp_regions; - if (addr_index < MAX_RISCV_PMPS) { + if (addr_index < pmp_regions) { if (env->pmp_state.pmp[addr_index].addr_reg == val) { /* no change */ return; @@ -XXX,XX +XXX,XX @@ void pmpaddr_csr_write(CPURISCVState *env, uint32_t addr_index, * In TOR mode, need to check the lock bit of the next pmp * (if there is a next). */ - if (addr_index + 1 < MAX_RISCV_PMPS) { + if (addr_index + 1 < pmp_regions) { uint8_t pmp_cfg = env->pmp_state.pmp[addr_index + 1].cfg_reg; is_next_cfg_tor = PMP_AMATCH_TOR == pmp_get_a_field(pmp_cfg); @@ -XXX,XX +XXX,XX @@ void pmpaddr_csr_write(CPURISCVState *env, uint32_t addr_index, target_ulong pmpaddr_csr_read(CPURISCVState *env, uint32_t addr_index) { target_ulong val = 0; + uint8_t pmp_regions = riscv_cpu_cfg(env)->pmp_regions; - if (addr_index < MAX_RISCV_PMPS) { + if (addr_index < pmp_regions) { val = env->pmp_state.pmp[addr_index].addr_reg; trace_pmpaddr_csr_read(env->mhartid, addr_index, val); } else { @@ -XXX,XX +XXX,XX @@ void mseccfg_csr_write(CPURISCVState *env, target_ulong val) { int i; uint64_t mask = MSECCFG_MMWP | MSECCFG_MML; + uint8_t pmp_regions = riscv_cpu_cfg(env)->pmp_regions; /* Update PMM field only if the value is valid according to Zjpm v1.0 */ if (riscv_cpu_cfg(env)->ext_smmpm && riscv_cpu_mxl(env) == MXL_RV64 && @@ -XXX,XX +XXX,XX @@ void mseccfg_csr_write(CPURISCVState *env, target_ulong val) /* RLB cannot be enabled if it's already 0 and if any regions are locked */ if (!MSECCFG_RLB_ISSET(env)) { - for (i = 0; i < MAX_RISCV_PMPS; i++) { + for (i = 0; i < pmp_regions; i++) { if (pmp_is_locked(env, i)) { val &= ~MSECCFG_RLB; break; @@ -XXX,XX +XXX,XX @@ target_ulong pmp_get_tlb_size(CPURISCVState *env, hwaddr addr) hwaddr tlb_sa = addr & ~(TARGET_PAGE_SIZE - 1); hwaddr tlb_ea = tlb_sa + TARGET_PAGE_SIZE - 1; int i; + uint8_t pmp_regions = riscv_cpu_cfg(env)->pmp_regions; /* * If PMP is not supported or there are no PMP rules, the TLB page will not @@ -XXX,XX +XXX,XX @@ target_ulong pmp_get_tlb_size(CPURISCVState *env, hwaddr addr) return TARGET_PAGE_SIZE; } - for (i = 0; i < MAX_RISCV_PMPS; i++) { + for (i = 0; i < pmp_regions; i++) { if (pmp_get_a_field(env->pmp_state.pmp[i].cfg_reg) == PMP_AMATCH_OFF) { continue; } -- 2.50.0 From: Nutty Liu <liujingqi@lanxincomputing.com> The original implementation incorrectly performed a bitwise AND operation between the PPN of iova and PPN Mask, leading to an incorrect PPN field in Translation-reponse register. The PPN of iova should be set entirely in the PPN field of Translation-reponse register. Also remove the code that was used to clear S field since this field is already zero. Signed-off-by: Nutty Liu <liujingqi@lanxincomputing.com> Reviewed-by: Tomasz Jeznach <tjeznach@rivosinc.com> Message-ID: <20250605124848.1248-1-liujingqi@lanxincomputing.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/hw/riscv/riscv-iommu.c b/hw/riscv/riscv-iommu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.c +++ b/hw/riscv/riscv-iommu.c @@ -XXX,XX +XXX,XX @@ static void riscv_iommu_process_dbg(RISCVIOMMUState *s) iova = RISCV_IOMMU_TR_RESPONSE_FAULT | (((uint64_t) fault) << 10); } else { iova = iotlb.translated_addr & ~iotlb.addr_mask; - iova >>= TARGET_PAGE_BITS; - iova &= RISCV_IOMMU_TR_RESPONSE_PPN; - - /* We do not support superpages (> 4kbs) for now */ - iova &= ~RISCV_IOMMU_TR_RESPONSE_S; + iova = set_field(0, RISCV_IOMMU_TR_RESPONSE_PPN, PPN_DOWN(iova)); } riscv_iommu_reg_set64(s, RISCV_IOMMU_REG_TR_RESPONSE, iova); } -- 2.50.0 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> The SBI spec states, for console write byte: "This is a blocking SBI call and it will only return after writing the specified byte to the debug console. It will also return, with SBI_ERR_FAILED, if there are I/O errors." Being a blocker call will either succeed writing the byte or error out, it's feasible to use the blocking qemu_chr_fe_write_all() instead of qemu_chr_fe_write(). Last but not the least, we will duck possible changes in qemu_chr_fe_write() where ret = 0 will have a 'zero byte written' semantic [1] - something that we're not ready to deal in this current state. [1] https://lore.kernel.org/qemu-devel/CAFEAcA_kEndvNtw4EHySXWwQPoGs029yAzZGGBcV=zGHaj7KUQ@mail.gmail.com/ Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20250605094456.1385105-2-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/kvm/kvm-cpu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/riscv/kvm/kvm-cpu.c b/target/riscv/kvm/kvm-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/kvm/kvm-cpu.c +++ b/target/riscv/kvm/kvm-cpu.c @@ -XXX,XX +XXX,XX @@ static void kvm_riscv_handle_sbi_dbcn(CPUState *cs, struct kvm_run *run) break; case SBI_EXT_DBCN_CONSOLE_WRITE_BYTE: ch = run->riscv_sbi.args[0]; - ret = qemu_chr_fe_write(serial_hd(0)->be, &ch, sizeof(ch)); + ret = qemu_chr_fe_write_all(serial_hd(0)->be, &ch, sizeof(ch)); if (ret < 0) { error_report("SBI_EXT_DBCN_CONSOLE_WRITE_BYTE: error when " -- 2.50.0 From: Anton Blanchard <antonb@tenstorrent.com> fcvt.s.bf16 uses the FP16 check_nanbox_h() which returns an FP16 quiet NaN. Add check_nanbox_bf16() which returns a BF16 quiet NaN. Signed-off-by: Anton Blanchard <antonb@tenstorrent.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250501114253.594887-1-antonb@tenstorrent.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/internals.h | 16 ++++++++++++++++ target/riscv/fpu_helper.c | 2 +- 2 files changed, 17 insertions(+), 1 deletion(-) diff --git a/target/riscv/internals.h b/target/riscv/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/internals.h +++ b/target/riscv/internals.h @@ -XXX,XX +XXX,XX @@ static inline float16 check_nanbox_h(CPURISCVState *env, uint64_t f) } } +static inline float16 check_nanbox_bf16(CPURISCVState *env, uint64_t f) +{ + /* Disable nanbox check when enable zfinx */ + if (env_archcpu(env)->cfg.ext_zfinx) { + return (uint16_t)f; + } + + uint64_t mask = MAKE_64BIT_MASK(16, 48); + + if (likely((f & mask) == mask)) { + return (uint16_t)f; + } else { + return 0x7FC0u; /* default qnan */ + } +} + #ifndef CONFIG_USER_ONLY /* Our implementation of SysemuCPUOps::has_work */ bool riscv_cpu_has_work(CPUState *cs); diff --git a/target/riscv/fpu_helper.c b/target/riscv/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/fpu_helper.c +++ b/target/riscv/fpu_helper.c @@ -XXX,XX +XXX,XX @@ uint64_t helper_fcvt_bf16_s(CPURISCVState *env, uint64_t rs1) uint64_t helper_fcvt_s_bf16(CPURISCVState *env, uint64_t rs1) { - float16 frs1 = check_nanbox_h(env, rs1); + float16 frs1 = check_nanbox_bf16(env, rs1); return nanbox_s(env, bfloat16_to_float32(frs1, &env->fp_status)); } -- 2.50.0 From: Florian Lugou <florian.lugou@provenrun.com> The current handler for TXFIFO writes schedules an async callback to pop characters from the queue. When software writes to TXFIFO faster than the async callback delay (100ns), the timer may be pushed back while the previous character has not be dequeued yet. This happens in particular when using -icount with small shift values. This is especially worrysome when software repetitively issues amoor.w instructions (as suggested by SiFive specification) and the FIFO is full, leading to the callback being infinitly pushed back. This commit fixes the issue by never pushing back the timer, only updating it if it is not already active. Signed-off-by: Florian Lugou <florian.lugou@provenrun.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250605101255.797162-1-florian.lugou@provenrun.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/char/sifive_uart.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/hw/char/sifive_uart.c b/hw/char/sifive_uart.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/sifive_uart.c +++ b/hw/char/sifive_uart.c @@ -XXX,XX +XXX,XX @@ static void sifive_uart_write_tx_fifo(SiFiveUARTState *s, const uint8_t *buf, s->txfifo |= SIFIVE_UART_TXFIFO_FULL; } - timer_mod(s->fifo_trigger_handle, current_time + - TX_INTERRUPT_TRIGGER_DELAY_NS); + if (!timer_pending(s->fifo_trigger_handle)) { + timer_mod(s->fifo_trigger_handle, current_time + + TX_INTERRUPT_TRIGGER_DELAY_NS); + } } static uint64_t -- 2.50.0 From: Joel Stanley <joel@jms.id.au> The address is a hardware address, so use hwaddr for consistency with the rest of the machine. Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-ID: <20250604025450.85327-2-joel@jms.id.au> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_socket_clint(RISCVVirtState *s, int cpu; g_autofree char *clint_name = NULL; g_autofree uint32_t *clint_cells = NULL; - unsigned long clint_addr; + hwaddr clint_addr; MachineState *ms = MACHINE(s); static const char * const clint_compat[2] = { "sifive,clint0", "riscv,clint0" @@ -XXX,XX +XXX,XX @@ static void create_fdt_socket_clint(RISCVVirtState *s, } clint_addr = s->memmap[VIRT_CLINT].base + - (s->memmap[VIRT_CLINT].size * socket); - clint_name = g_strdup_printf("/soc/clint@%lx", clint_addr); + s->memmap[VIRT_CLINT].size * socket; + clint_name = g_strdup_printf("/soc/clint@%"HWADDR_PRIx, clint_addr); qemu_fdt_add_subnode(ms->fdt, clint_name); qemu_fdt_setprop_string_array(ms->fdt, clint_name, "compatible", (char **)&clint_compat, -- 2.50.0 From: Joel Stanley <joel@jms.id.au> The current device tree property uses two cells for the address (and for the size), but assumes the they are less than 32 bits by hard coding the high cell to zero. Use qemu_fdt_setprop_sized_cells to do the job of splitting the upper and lower 32 bits across cells. Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-ID: <20250604025450.85327-3-joel@jms.id.au> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_socket_clint(RISCVVirtState *s, qemu_fdt_setprop_string_array(ms->fdt, clint_name, "compatible", (char **)&clint_compat, ARRAY_SIZE(clint_compat)); - qemu_fdt_setprop_cells(ms->fdt, clint_name, "reg", - 0x0, clint_addr, 0x0, s->memmap[VIRT_CLINT].size); + qemu_fdt_setprop_sized_cells(ms->fdt, clint_name, "reg", + 2, clint_addr, 2, s->memmap[VIRT_CLINT].size); qemu_fdt_setprop(ms->fdt, clint_name, "interrupts-extended", clint_cells, s->soc[socket].num_harts * sizeof(uint32_t) * 4); riscv_socket_fdt_write_id(ms, clint_name, socket); -- 2.50.0 From: Joel Stanley <joel@jms.id.au> Use qemu_fdt_setprop_sized_cells to do the job of splitting the upper and lower 32 bits across cells. Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-ID: <20250604025450.85327-4-joel@jms.id.au> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_socket_memory(RISCVVirtState *s, int socket) size = riscv_socket_mem_size(ms, socket); mem_name = g_strdup_printf("/memory@%"HWADDR_PRIx, addr); qemu_fdt_add_subnode(ms->fdt, mem_name); - qemu_fdt_setprop_cells(ms->fdt, mem_name, "reg", - addr >> 32, addr, size >> 32, size); + qemu_fdt_setprop_sized_cells(ms->fdt, mem_name, "reg", 2, addr, 2, size); qemu_fdt_setprop_string(ms->fdt, mem_name, "device_type", "memory"); riscv_socket_fdt_write_id(ms, mem_name, socket); } -- 2.50.0 From: Joel Stanley <joel@jms.id.au> The current device tree property uses two cells for the address (and for the size), but assumes the they are less than 32 bits by hard coding the high cell to zero. Use qemu_fdt_setprop_sized_cells to do the job of splitting the upper and lower 32 bits across cells. Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-ID: <20250604025450.85327-5-joel@jms.id.au> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_one_aplic(RISCVVirtState *s, int socket, qemu_fdt_setprop_cell(ms->fdt, aplic_name, "msi-parent", msi_phandle); } - qemu_fdt_setprop_cells(ms->fdt, aplic_name, "reg", - 0x0, aplic_addr, 0x0, aplic_size); + qemu_fdt_setprop_sized_cells(ms->fdt, aplic_name, "reg", + 2, aplic_addr, 2, aplic_size); qemu_fdt_setprop_cell(ms->fdt, aplic_name, "riscv,num-sources", VIRT_IRQCHIP_NUM_SOURCES); -- 2.50.0 From: Joel Stanley <joel@jms.id.au> The current device tree property uses two cells for the address (and for the size), but assumes the they are less than 32 bits by hard coding the high cell to zero. Use qemu_fdt_setprop_sized_cells to do the job of splitting the upper and lower 32 bits across cells. Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-ID: <20250604025450.85327-6-joel@jms.id.au> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_socket_aclint(RISCVVirtState *s, qemu_fdt_add_subnode(ms->fdt, name); qemu_fdt_setprop_string(ms->fdt, name, "compatible", "riscv,aclint-mswi"); - qemu_fdt_setprop_cells(ms->fdt, name, "reg", - 0x0, addr, 0x0, RISCV_ACLINT_SWI_SIZE); + qemu_fdt_setprop_sized_cells(ms->fdt, name, "reg", + 2, addr, 2, RISCV_ACLINT_SWI_SIZE); qemu_fdt_setprop(ms->fdt, name, "interrupts-extended", aclint_mswi_cells, aclint_cells_size); qemu_fdt_setprop(ms->fdt, name, "interrupt-controller", NULL, 0); @@ -XXX,XX +XXX,XX @@ static void create_fdt_socket_aclint(RISCVVirtState *s, qemu_fdt_add_subnode(ms->fdt, name); qemu_fdt_setprop_string(ms->fdt, name, "compatible", "riscv,aclint-mtimer"); - qemu_fdt_setprop_cells(ms->fdt, name, "reg", - 0x0, addr + RISCV_ACLINT_DEFAULT_MTIME, - 0x0, size - RISCV_ACLINT_DEFAULT_MTIME, - 0x0, addr + RISCV_ACLINT_DEFAULT_MTIMECMP, - 0x0, RISCV_ACLINT_DEFAULT_MTIME); + qemu_fdt_setprop_sized_cells(ms->fdt, name, "reg", + 2, addr + RISCV_ACLINT_DEFAULT_MTIME, + 2, size - RISCV_ACLINT_DEFAULT_MTIME, + 2, addr + RISCV_ACLINT_DEFAULT_MTIMECMP, + 2, RISCV_ACLINT_DEFAULT_MTIME); qemu_fdt_setprop(ms->fdt, name, "interrupts-extended", aclint_mtimer_cells, aclint_cells_size); riscv_socket_fdt_write_id(ms, name, socket); @@ -XXX,XX +XXX,XX @@ static void create_fdt_socket_aclint(RISCVVirtState *s, qemu_fdt_add_subnode(ms->fdt, name); qemu_fdt_setprop_string(ms->fdt, name, "compatible", "riscv,aclint-sswi"); - qemu_fdt_setprop_cells(ms->fdt, name, "reg", - 0x0, addr, 0x0, s->memmap[VIRT_ACLINT_SSWI].size); + qemu_fdt_setprop_sized_cells(ms->fdt, name, "reg", + 2, addr, 2, s->memmap[VIRT_ACLINT_SSWI].size); qemu_fdt_setprop(ms->fdt, name, "interrupts-extended", aclint_sswi_cells, aclint_cells_size); qemu_fdt_setprop(ms->fdt, name, "interrupt-controller", NULL, 0); -- 2.50.0 From: Joel Stanley <joel@jms.id.au> The current device tree property uses two cells for the address (and for the size), but assumes the they are less than 32 bits by hard coding the high cell to zero. Use qemu_fdt_setprop_sized_cells to do the job of splitting the upper and lower 32 bits across cells. Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-ID: <20250604025450.85327-7-joel@jms.id.au> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_socket_plic(RISCVVirtState *s, s->soc[socket].num_harts * sizeof(uint32_t) * 4); } - qemu_fdt_setprop_cells(ms->fdt, plic_name, "reg", - 0x0, plic_addr, 0x0, s->memmap[VIRT_PLIC].size); + qemu_fdt_setprop_sized_cells(ms->fdt, plic_name, "reg", + 2, plic_addr, 2, s->memmap[VIRT_PLIC].size); qemu_fdt_setprop_cell(ms->fdt, plic_name, "riscv,ndev", VIRT_IRQCHIP_NUM_SOURCES - 1); riscv_socket_fdt_write_id(ms, plic_name, socket); -- 2.50.0 From: Joel Stanley <joel@jms.id.au> The current device tree property uses two cells for the address (and for the size), but assumes the they are less than 32 bits by hard coding the high cell to zero. Use qemu_fdt_setprop_sized_cells to do the job of splitting the upper and lower 32 bits across cells. Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-ID: <20250604025450.85327-8-joel@jms.id.au> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_virtio(RISCVVirtState *s, uint32_t irq_virtio_phandle) qemu_fdt_add_subnode(ms->fdt, name); qemu_fdt_setprop_string(ms->fdt, name, "compatible", "virtio,mmio"); - qemu_fdt_setprop_cells(ms->fdt, name, "reg", - 0x0, addr, - 0x0, size); + qemu_fdt_setprop_sized_cells(ms->fdt, name, "reg", 2, addr, 2, size); qemu_fdt_setprop_cell(ms->fdt, name, "interrupt-parent", irq_virtio_phandle); if (s->aia_type == VIRT_AIA_TYPE_NONE) { -- 2.50.0 From: Joel Stanley <joel@jms.id.au> The current device tree property uses two cells for the address (and for the size), but assumes the they are less than 32 bits by hard coding the high cell to zero. Use qemu_fdt_setprop_sized_cells to do the job of splitting the upper and lower 32 bits across cells. Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-ID: <20250604025450.85327-9-joel@jms.id.au> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_reset(RISCVVirtState *s, uint32_t *phandle) qemu_fdt_setprop_string_array(ms->fdt, name, "compatible", (char **)&compat, ARRAY_SIZE(compat)); } - qemu_fdt_setprop_cells(ms->fdt, name, "reg", - 0x0, s->memmap[VIRT_TEST].base, 0x0, s->memmap[VIRT_TEST].size); + qemu_fdt_setprop_sized_cells(ms->fdt, name, "reg", + 2, s->memmap[VIRT_TEST].base, + 2, s->memmap[VIRT_TEST].size); qemu_fdt_setprop_cell(ms->fdt, name, "phandle", test_phandle); test_phandle = qemu_fdt_get_phandle(ms->fdt, name); g_free(name); -- 2.50.0 From: Joel Stanley <joel@jms.id.au> The current device tree property uses two cells for the address (and for the size), but assumes the they are less than 32 bits by hard coding the high cell to zero. Use qemu_fdt_setprop_sized_cells to do the job of splitting the upper and lower 32 bits across cells. Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-ID: <20250604025450.85327-10-joel@jms.id.au> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_uart(RISCVVirtState *s, s->memmap[VIRT_UART0].base); qemu_fdt_add_subnode(ms->fdt, name); qemu_fdt_setprop_string(ms->fdt, name, "compatible", "ns16550a"); - qemu_fdt_setprop_cells(ms->fdt, name, "reg", - 0x0, s->memmap[VIRT_UART0].base, - 0x0, s->memmap[VIRT_UART0].size); + qemu_fdt_setprop_sized_cells(ms->fdt, name, "reg", + 2, s->memmap[VIRT_UART0].base, + 2, s->memmap[VIRT_UART0].size); qemu_fdt_setprop_cell(ms->fdt, name, "clock-frequency", 3686400); qemu_fdt_setprop_cell(ms->fdt, name, "interrupt-parent", irq_mmio_phandle); if (s->aia_type == VIRT_AIA_TYPE_NONE) { -- 2.50.0 From: Joel Stanley <joel@jms.id.au> The current device tree property uses two cells for the address (and for the size), but assumes the they are less than 32 bits by hard coding the high cell to zero. Use qemu_fdt_setprop_sized_cells to do the job of splitting the upper and lower 32 bits across cells. Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-ID: <20250604025450.85327-11-joel@jms.id.au> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_rtc(RISCVVirtState *s, qemu_fdt_add_subnode(ms->fdt, name); qemu_fdt_setprop_string(ms->fdt, name, "compatible", "google,goldfish-rtc"); - qemu_fdt_setprop_cells(ms->fdt, name, "reg", - 0x0, s->memmap[VIRT_RTC].base, 0x0, s->memmap[VIRT_RTC].size); + qemu_fdt_setprop_sized_cells(ms->fdt, name, "reg", + 2, s->memmap[VIRT_RTC].base, + 2, s->memmap[VIRT_RTC].size); qemu_fdt_setprop_cell(ms->fdt, name, "interrupt-parent", irq_mmio_phandle); if (s->aia_type == VIRT_AIA_TYPE_NONE) { -- 2.50.0 From: Joel Stanley <joel@jms.id.au> The current device tree property uses two cells for the address (and for the size), but assumes the they are less than 32 bits by hard coding the high cell to zero. Use qemu_fdt_setprop_sized_cells to do the job of splitting the upper and lower 32 bits across cells. Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-ID: <20250604025450.85327-12-joel@jms.id.au> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_iommu_sys(RISCVVirtState *s, uint32_t irq_chip, qemu_fdt_setprop_cell(fdt, iommu_node, "#iommu-cells", 1); qemu_fdt_setprop_cell(fdt, iommu_node, "phandle", iommu_phandle); - qemu_fdt_setprop_cells(fdt, iommu_node, "reg", - addr >> 32, addr, size >> 32, size); + qemu_fdt_setprop_sized_cells(fdt, iommu_node, "reg", 2, addr, 2, size); qemu_fdt_setprop_cell(fdt, iommu_node, "interrupt-parent", irq_chip); qemu_fdt_setprop_cells(fdt, iommu_node, "interrupts", -- 2.50.0 From: Joel Stanley <joel@jms.id.au> The current device tree property uses two cells for the address (and for the size), but assumes the they are less than 32 bits by hard coding the high cell to zero. Use qemu_fdt_setprop_sized_cells to do the job of splitting the upper and lower 32 bits across cells. Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-ID: <20250604025450.85327-13-joel@jms.id.au> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_pcie(RISCVVirtState *s, if (s->aia_type == VIRT_AIA_TYPE_APLIC_IMSIC) { qemu_fdt_setprop_cell(ms->fdt, name, "msi-parent", msi_pcie_phandle); } - qemu_fdt_setprop_cells(ms->fdt, name, "reg", 0, - s->memmap[VIRT_PCIE_ECAM].base, 0, s->memmap[VIRT_PCIE_ECAM].size); + qemu_fdt_setprop_sized_cells(ms->fdt, name, "reg", 2, + s->memmap[VIRT_PCIE_ECAM].base, 2, s->memmap[VIRT_PCIE_ECAM].size); qemu_fdt_setprop_sized_cells(ms->fdt, name, "ranges", 1, FDT_PCI_RANGE_IOPORT, 2, 0, 2, s->memmap[VIRT_PCIE_PIO].base, 2, s->memmap[VIRT_PCIE_PIO].size, -- 2.50.0 From: Huang Borong <3543977024@qq.com> Add a CPU entry for the Xiangshan Kunminghu CPU, an open-source, high-performance RISC-V processor. More details can be found at: https://github.com/OpenXiangShan/XiangShan Note: The ISA extensions supported by the Xiangshan Kunminghu CPU are categorized based on four RISC-V specifications: Volume I: Unprivileged Architecture, Volume II: Privileged Architecture, AIA, and RVA23. The extensions within each category are organized according to the chapter order in the specifications. Signed-off-by: Yu Hu <huyu@bosc.ac.cn> Signed-off-by: Ran Wang <wangran@bosc.ac.cn> Signed-off-by: Borong Huang <3543977024@qq.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250425122212.364-1-wangran@bosc.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu-qom.h | 1 + target/riscv/cpu.c | 58 ++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 59 insertions(+) diff --git a/target/riscv/cpu-qom.h b/target/riscv/cpu-qom.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu-qom.h +++ b/target/riscv/cpu-qom.h @@ -XXX,XX +XXX,XX @@ #define TYPE_RISCV_CPU_VEYRON_V1 RISCV_CPU_TYPE_NAME("veyron-v1") #define TYPE_RISCV_CPU_TT_ASCALON RISCV_CPU_TYPE_NAME("tt-ascalon") #define TYPE_RISCV_CPU_XIANGSHAN_NANHU RISCV_CPU_TYPE_NAME("xiangshan-nanhu") +#define TYPE_RISCV_CPU_XIANGSHAN_KMH RISCV_CPU_TYPE_NAME("xiangshan-kunminghu") #define TYPE_RISCV_CPU_HOST RISCV_CPU_TYPE_NAME("host") OBJECT_DECLARE_CPU_TYPE(RISCVCPU, RISCVCPUClass, RISCV_CPU) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static const TypeInfo riscv_cpu_type_infos[] = { .cfg.max_satp_mode = VM_1_10_SV39, ), + DEFINE_RISCV_CPU(TYPE_RISCV_CPU_XIANGSHAN_KMH, TYPE_RISCV_VENDOR_CPU, + .misa_mxl_max = MXL_RV64, + .misa_ext = RVG | RVC | RVB | RVS | RVU | RVH | RVV, + .priv_spec = PRIV_VERSION_1_13_0, + /* + * The RISC-V Instruction Set Manual: Volume I + * Unprivileged Architecture + */ + .cfg.ext_zicntr = true, + .cfg.ext_zihpm = true, + .cfg.ext_zihintntl = true, + .cfg.ext_zihintpause = true, + .cfg.ext_zimop = true, + .cfg.ext_zcmop = true, + .cfg.ext_zicond = true, + .cfg.ext_zawrs = true, + .cfg.ext_zacas = true, + .cfg.ext_zfh = true, + .cfg.ext_zfa = true, + .cfg.ext_zcb = true, + .cfg.ext_zbc = true, + .cfg.ext_zvfh = true, + .cfg.ext_zkn = true, + .cfg.ext_zks = true, + .cfg.ext_zkt = true, + .cfg.ext_zvbb = true, + .cfg.ext_zvkt = true, + /* + * The RISC-V Instruction Set Manual: Volume II + * Privileged Architecture + */ + .cfg.ext_smstateen = true, + .cfg.ext_smcsrind = true, + .cfg.ext_sscsrind = true, + .cfg.ext_svnapot = true, + .cfg.ext_svpbmt = true, + .cfg.ext_svinval = true, + .cfg.ext_sstc = true, + .cfg.ext_sscofpmf = true, + .cfg.ext_ssdbltrp = true, + .cfg.ext_ssnpm = true, + .cfg.ext_smnpm = true, + .cfg.ext_smmpm = true, + .cfg.ext_sspm = true, + .cfg.ext_supm = true, + /* The RISC-V Advanced Interrupt Architecture */ + .cfg.ext_smaia = true, + .cfg.ext_ssaia = true, + /* RVA23 Profiles */ + .cfg.ext_zicbom = true, + .cfg.ext_zicbop = true, + .cfg.ext_zicboz = true, + .cfg.ext_svade = true, + .cfg.mmu = true, + .cfg.pmp = true, + .cfg.max_satp_mode = VM_1_10_SV48, + ), + #if defined(CONFIG_TCG) && !defined(CONFIG_USER_ONLY) DEFINE_RISCV_CPU(TYPE_RISCV_CPU_BASE128, TYPE_RISCV_DYNAMIC_CPU, .cfg.max_satp_mode = VM_1_10_SV57, -- 2.50.0 From: Huang Borong <3543977024@qq.com> This implementation provides emulation for the Xiangshan Kunminghu FPGA prototype platform, including support for UART, CLINT, IMSIC, and APLIC devices. More details can be found at https://github.com/OpenXiangShan/XiangShan Signed-off-by: qinshaoqing <qinshaoqing@bosc.ac.cn> Signed-off-by: Yang Wang <wangyang@bosc.ac.cn> Signed-off-by: Yu Hu <819258943@qq.com> Signed-off-by: Ran Wang <wangran@bosc.ac.cn> Signed-off-by: Borong Huang <3543977024@qq.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20250617074222.17618-1-wangran@bosc.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- MAINTAINERS | 7 + docs/system/riscv/xiangshan-kunminghu.rst | 39 ++++ docs/system/target-riscv.rst | 1 + configs/devices/riscv64-softmmu/default.mak | 1 + include/hw/riscv/xiangshan_kmh.h | 68 ++++++ hw/riscv/xiangshan_kmh.c | 220 ++++++++++++++++++++ hw/riscv/Kconfig | 9 + hw/riscv/meson.build | 1 + 8 files changed, 346 insertions(+) create mode 100644 docs/system/riscv/xiangshan-kunminghu.rst create mode 100644 include/hw/riscv/xiangshan_kmh.h create mode 100644 hw/riscv/xiangshan_kmh.c diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ S: Maintained F: hw/riscv/microblaze-v-generic.c F: docs/system/riscv/microblaze-v-generic.rst +Xiangshan Kunminghu +M: Ran Wang <wangran@bosc.ac.cn> +S: Maintained +F: docs/system/riscv/xiangshan-kunminghu.rst +F: hw/riscv/xiangshan_kmh.c +F: include/hw/riscv/xiangshan_kmh.h + RX Machines ----------- rx-gdbsim diff --git a/docs/system/riscv/xiangshan-kunminghu.rst b/docs/system/riscv/xiangshan-kunminghu.rst new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/docs/system/riscv/xiangshan-kunminghu.rst @@ -XXX,XX +XXX,XX @@ +BOSC Xiangshan Kunminghu FPGA prototype platform (``xiangshan-kunminghu``) +========================================================================== +The ``xiangshan-kunminghu`` machine is compatible with our FPGA prototype +platform. + +XiangShan is an open-source high-performance RISC-V processor project. +The third generation processor is called Kunminghu. Kunminghu is a 64-bit +RV64GCBSUHV processor core. More information can be found in our Github +repository: +https://github.com/OpenXiangShan/XiangShan + +Supported devices +----------------- +The ``xiangshan-kunminghu`` machine supports the following devices: + +* Up to 16 xiangshan-kunminghu cores +* Core Local Interruptor (CLINT) +* Incoming MSI Controller (IMSIC) +* Advanced Platform-Level Interrupt Controller (APLIC) +* 1 UART + +Boot options +------------ +The ``xiangshan-kunminghu`` machine can start using the standard ``-bios`` +functionality for loading the boot image. You need to compile and link +the firmware, kernel, and Device Tree (FDT) into a single binary file, +such as ``fw_payload.bin``. + +Running +------- +Below is an example command line for running the ``xiangshan-kunminghu`` +machine: + +.. code-block:: bash + + $ qemu-system-riscv64 -machine xiangshan-kunminghu \ + -smp 16 -m 16G \ + -bios path/to/opensbi/platform/generic/firmware/fw_payload.bin \ + -nographic diff --git a/docs/system/target-riscv.rst b/docs/system/target-riscv.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/target-riscv.rst +++ b/docs/system/target-riscv.rst @@ -XXX,XX +XXX,XX @@ undocumented; you can get a complete list by running riscv/shakti-c riscv/sifive_u riscv/virt + riscv/xiangshan-kunminghu RISC-V CPU firmware ------------------- diff --git a/configs/devices/riscv64-softmmu/default.mak b/configs/devices/riscv64-softmmu/default.mak index XXXXXXX..XXXXXXX 100644 --- a/configs/devices/riscv64-softmmu/default.mak +++ b/configs/devices/riscv64-softmmu/default.mak @@ -XXX,XX +XXX,XX @@ # CONFIG_RISCV_VIRT=n # CONFIG_MICROCHIP_PFSOC=n # CONFIG_SHAKTI_C=n +# CONFIG_XIANGSHAN_KUNMINGHU=n diff --git a/include/hw/riscv/xiangshan_kmh.h b/include/hw/riscv/xiangshan_kmh.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/riscv/xiangshan_kmh.h @@ -XXX,XX +XXX,XX @@ +/* SPDX-License-Identifier: BSD-2-Clause */ +/* + * QEMU RISC-V Board Compatible with the Xiangshan Kunminghu + * FPGA prototype platform + * + * Copyright (c) 2025 Beijing Institute of Open Source Chip (BOSC) + * + */ + +#ifndef HW_XIANGSHAN_KMH_H +#define HW_XIANGSHAN_KMH_H + +#include "hw/boards.h" +#include "hw/riscv/riscv_hart.h" + +#define XIANGSHAN_KMH_MAX_CPUS 16 + +typedef struct XiangshanKmhSoCState { + /*< private >*/ + DeviceState parent_obj; + + /*< public >*/ + RISCVHartArrayState cpus; + DeviceState *irqchip; + MemoryRegion rom; +} XiangshanKmhSoCState; + +#define TYPE_XIANGSHAN_KMH_SOC "xiangshan.kunminghu.soc" +DECLARE_INSTANCE_CHECKER(XiangshanKmhSoCState, XIANGSHAN_KMH_SOC, + TYPE_XIANGSHAN_KMH_SOC) + +typedef struct XiangshanKmhState { + /*< private >*/ + MachineState parent_obj; + + /*< public >*/ + XiangshanKmhSoCState soc; +} XiangshanKmhState; + +#define TYPE_XIANGSHAN_KMH_MACHINE MACHINE_TYPE_NAME("xiangshan-kunminghu") +DECLARE_INSTANCE_CHECKER(XiangshanKmhState, XIANGSHAN_KMH_MACHINE, + TYPE_XIANGSHAN_KMH_MACHINE) + +enum { + XIANGSHAN_KMH_ROM, + XIANGSHAN_KMH_UART0, + XIANGSHAN_KMH_CLINT, + XIANGSHAN_KMH_APLIC_M, + XIANGSHAN_KMH_APLIC_S, + XIANGSHAN_KMH_IMSIC_M, + XIANGSHAN_KMH_IMSIC_S, + XIANGSHAN_KMH_DRAM, +}; + +enum { + XIANGSHAN_KMH_UART0_IRQ = 10, +}; + +/* Indicating Timebase-freq (1MHZ) */ +#define XIANGSHAN_KMH_CLINT_TIMEBASE_FREQ 1000000 + +#define XIANGSHAN_KMH_IMSIC_NUM_IDS 255 +#define XIANGSHAN_KMH_IMSIC_NUM_GUESTS 7 +#define XIANGSHAN_KMH_IMSIC_GUEST_BITS 3 + +#define XIANGSHAN_KMH_APLIC_NUM_SOURCES 96 + +#endif diff --git a/hw/riscv/xiangshan_kmh.c b/hw/riscv/xiangshan_kmh.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/riscv/xiangshan_kmh.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU RISC-V Board Compatible with the Xiangshan Kunminghu + * FPGA prototype platform + * + * Copyright (c) 2025 Beijing Institute of Open Source Chip (BOSC) + * SPDX-License-Identifier: GPL-2.0-or-later + * + * Provides a board compatible with the Xiangshan Kunminghu + * FPGA prototype platform: + * + * 0) UART (16550A) + * 1) CLINT (Core-Local Interruptor) + * 2) IMSIC (Incoming MSI Controller) + * 3) APLIC (Advanced Platform-Level Interrupt Controller) + * + * More information can be found in our Github repository: + * https://github.com/OpenXiangShan/XiangShan + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2 or later, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "system/address-spaces.h" +#include "hw/boards.h" +#include "hw/char/serial-mm.h" +#include "hw/intc/riscv_aclint.h" +#include "hw/intc/riscv_aplic.h" +#include "hw/intc/riscv_imsic.h" +#include "hw/qdev-properties.h" +#include "hw/riscv/boot.h" +#include "hw/riscv/xiangshan_kmh.h" +#include "hw/riscv/riscv_hart.h" +#include "system/system.h" + +static const MemMapEntry xiangshan_kmh_memmap[] = { + [XIANGSHAN_KMH_ROM] = { 0x1000, 0xF000 }, + [XIANGSHAN_KMH_UART0] = { 0x310B0000, 0x10000 }, + [XIANGSHAN_KMH_CLINT] = { 0x38000000, 0x10000 }, + [XIANGSHAN_KMH_APLIC_M] = { 0x31100000, 0x4000 }, + [XIANGSHAN_KMH_APLIC_S] = { 0x31120000, 0x4000 }, + [XIANGSHAN_KMH_IMSIC_M] = { 0x3A800000, 0x10000 }, + [XIANGSHAN_KMH_IMSIC_S] = { 0x3B000000, 0x80000 }, + [XIANGSHAN_KMH_DRAM] = { 0x80000000, 0x0 }, +}; + +static DeviceState *xiangshan_kmh_create_aia(uint32_t num_harts) +{ + int i; + const MemMapEntry *memmap = xiangshan_kmh_memmap; + hwaddr addr = 0; + DeviceState *aplic_m = NULL; + + /* M-level IMSICs */ + addr = memmap[XIANGSHAN_KMH_IMSIC_M].base; + for (i = 0; i < num_harts; i++) { + riscv_imsic_create(addr + i * IMSIC_HART_SIZE(0), i, true, + 1, XIANGSHAN_KMH_IMSIC_NUM_IDS); + } + + /* S-level IMSICs */ + addr = memmap[XIANGSHAN_KMH_IMSIC_S].base; + for (i = 0; i < num_harts; i++) { + riscv_imsic_create(addr + + i * IMSIC_HART_SIZE(XIANGSHAN_KMH_IMSIC_GUEST_BITS), + i, false, 1 + XIANGSHAN_KMH_IMSIC_GUEST_BITS, + XIANGSHAN_KMH_IMSIC_NUM_IDS); + } + + /* M-level APLIC */ + aplic_m = riscv_aplic_create(memmap[XIANGSHAN_KMH_APLIC_M].base, + memmap[XIANGSHAN_KMH_APLIC_M].size, + 0, 0, XIANGSHAN_KMH_APLIC_NUM_SOURCES, + 1, true, true, NULL); + + /* S-level APLIC */ + riscv_aplic_create(memmap[XIANGSHAN_KMH_APLIC_S].base, + memmap[XIANGSHAN_KMH_APLIC_S].size, + 0, 0, XIANGSHAN_KMH_APLIC_NUM_SOURCES, + 1, true, false, aplic_m); + + return aplic_m; +} + +static void xiangshan_kmh_soc_realize(DeviceState *dev, Error **errp) +{ + MachineState *ms = MACHINE(qdev_get_machine()); + XiangshanKmhSoCState *s = XIANGSHAN_KMH_SOC(dev); + const MemMapEntry *memmap = xiangshan_kmh_memmap; + MemoryRegion *system_memory = get_system_memory(); + uint32_t num_harts = ms->smp.cpus; + + qdev_prop_set_uint32(DEVICE(&s->cpus), "num-harts", num_harts); + qdev_prop_set_uint32(DEVICE(&s->cpus), "hartid-base", 0); + qdev_prop_set_string(DEVICE(&s->cpus), "cpu-type", + TYPE_RISCV_CPU_XIANGSHAN_KMH); + sysbus_realize(SYS_BUS_DEVICE(&s->cpus), &error_fatal); + + /* AIA */ + s->irqchip = xiangshan_kmh_create_aia(num_harts); + + /* UART */ + serial_mm_init(system_memory, memmap[XIANGSHAN_KMH_UART0].base, 2, + qdev_get_gpio_in(s->irqchip, XIANGSHAN_KMH_UART0_IRQ), + 115200, serial_hd(0), DEVICE_LITTLE_ENDIAN); + + /* CLINT */ + riscv_aclint_swi_create(memmap[XIANGSHAN_KMH_CLINT].base, + 0, num_harts, false); + riscv_aclint_mtimer_create(memmap[XIANGSHAN_KMH_CLINT].base + + RISCV_ACLINT_SWI_SIZE, + RISCV_ACLINT_DEFAULT_MTIMER_SIZE, + 0, num_harts, RISCV_ACLINT_DEFAULT_MTIMECMP, + RISCV_ACLINT_DEFAULT_MTIME, + XIANGSHAN_KMH_CLINT_TIMEBASE_FREQ, true); + + /* ROM */ + memory_region_init_rom(&s->rom, OBJECT(dev), "xiangshan.kunminghu.rom", + memmap[XIANGSHAN_KMH_ROM].size, &error_fatal); + memory_region_add_subregion(system_memory, + memmap[XIANGSHAN_KMH_ROM].base, &s->rom); +} + +static void xiangshan_kmh_soc_class_init(ObjectClass *klass, const void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = xiangshan_kmh_soc_realize; + dc->user_creatable = false; +} + +static void xiangshan_kmh_soc_instance_init(Object *obj) +{ + XiangshanKmhSoCState *s = XIANGSHAN_KMH_SOC(obj); + + object_initialize_child(obj, "cpus", &s->cpus, TYPE_RISCV_HART_ARRAY); +} + +static const TypeInfo xiangshan_kmh_soc_info = { + .name = TYPE_XIANGSHAN_KMH_SOC, + .parent = TYPE_DEVICE, + .instance_size = sizeof(XiangshanKmhSoCState), + .instance_init = xiangshan_kmh_soc_instance_init, + .class_init = xiangshan_kmh_soc_class_init, +}; + +static void xiangshan_kmh_soc_register_types(void) +{ + type_register_static(&xiangshan_kmh_soc_info); +} +type_init(xiangshan_kmh_soc_register_types) + +static void xiangshan_kmh_machine_init(MachineState *machine) +{ + XiangshanKmhState *s = XIANGSHAN_KMH_MACHINE(machine); + const MemMapEntry *memmap = xiangshan_kmh_memmap; + MemoryRegion *system_memory = get_system_memory(); + hwaddr start_addr = memmap[XIANGSHAN_KMH_DRAM].base; + + /* Initialize SoC */ + object_initialize_child(OBJECT(machine), "soc", &s->soc, + TYPE_XIANGSHAN_KMH_SOC); + qdev_realize(DEVICE(&s->soc), NULL, &error_fatal); + + /* Register RAM */ + memory_region_add_subregion(system_memory, + memmap[XIANGSHAN_KMH_DRAM].base, + machine->ram); + + /* ROM reset vector */ + riscv_setup_rom_reset_vec(machine, &s->soc.cpus, + start_addr, + memmap[XIANGSHAN_KMH_ROM].base, + memmap[XIANGSHAN_KMH_ROM].size, 0, 0); + if (machine->firmware) { + riscv_load_firmware(machine->firmware, &start_addr, NULL); + } + + /* Note: dtb has been integrated into firmware(OpenSBI) when compiling */ +} + +static void xiangshan_kmh_machine_class_init(ObjectClass *klass, const void *data) +{ + MachineClass *mc = MACHINE_CLASS(klass); + static const char *const valid_cpu_types[] = { + TYPE_RISCV_CPU_XIANGSHAN_KMH, + NULL + }; + + mc->desc = "RISC-V Board compatible with the Xiangshan " \ + "Kunminghu FPGA prototype platform"; + mc->init = xiangshan_kmh_machine_init; + mc->max_cpus = XIANGSHAN_KMH_MAX_CPUS; + mc->default_cpu_type = TYPE_RISCV_CPU_XIANGSHAN_KMH; + mc->valid_cpu_types = valid_cpu_types; + mc->default_ram_id = "xiangshan.kunminghu.ram"; +} + +static const TypeInfo xiangshan_kmh_machine_info = { + .name = TYPE_XIANGSHAN_KMH_MACHINE, + .parent = TYPE_MACHINE, + .instance_size = sizeof(XiangshanKmhState), + .class_init = xiangshan_kmh_machine_class_init, +}; + +static void xiangshan_kmh_machine_register_types(void) +{ + type_register_static(&xiangshan_kmh_machine_info); +} +type_init(xiangshan_kmh_machine_register_types) diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/Kconfig +++ b/hw/riscv/Kconfig @@ -XXX,XX +XXX,XX @@ config SPIKE select HTIF select RISCV_ACLINT select SIFIVE_PLIC + +config XIANGSHAN_KUNMINGHU + bool + default y + depends on RISCV64 + select RISCV_ACLINT + select RISCV_APLIC + select RISCV_IMSIC + select SERIAL_MM diff --git a/hw/riscv/meson.build b/hw/riscv/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/meson.build +++ b/hw/riscv/meson.build @@ -XXX,XX +XXX,XX @@ riscv_ss.add(when: 'CONFIG_ACPI', if_true: files('virt-acpi-build.c')) riscv_ss.add(when: 'CONFIG_RISCV_IOMMU', if_true: files( 'riscv-iommu.c', 'riscv-iommu-pci.c', 'riscv-iommu-sys.c', 'riscv-iommu-hpm.c')) riscv_ss.add(when: 'CONFIG_MICROBLAZE_V', if_true: files('microblaze-v-generic.c')) +riscv_ss.add(when: 'CONFIG_XIANGSHAN_KUNMINGHU', if_true: files('xiangshan_kmh.c')) hw_arch += {'riscv': riscv_ss} -- 2.50.0 From: Max Chou <max.chou@sifive.com> According to the V spec, the vector fault-only-first load instructions may change the VL CSR. So the ldff_trans TCG translation function should generate the lookup_and_goto_ptr flow as the vsetvl/vsetvli translation function to make sure the vl_eq_vlmax TB flag is correct. Signed-off-by: Max Chou <max.chou@sifive.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20250627133013.443997-1-max.chou@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/insn_trans/trans_rvv.c.inc | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/target/riscv/insn_trans/trans_rvv.c.inc b/target/riscv/insn_trans/trans_rvv.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_rvv.c.inc +++ b/target/riscv/insn_trans/trans_rvv.c.inc @@ -XXX,XX +XXX,XX @@ static bool ldff_trans(uint32_t vd, uint32_t rs1, uint32_t data, fn(dest, mask, base, tcg_env, desc); finalize_rvv_inst(s); + + /* vector unit-stride fault-only-first load may modify vl CSR */ + gen_update_pc(s, s->cur_insn_len); + lookup_and_goto_ptr(s); + s->base.is_jmp = DISAS_NORETURN; + return true; } -- 2.50.0 From: "liu.xuemei1@zte.com.cn" <liu.xuemei1@zte.com.cn> Address an error in migration when aia is configured as 'aplic-imsic' in riscv kvm vm by adding riscv_aplic_state_needed() and riscv_imsic_state_needed() to determine whether the corresponding sates are needed. Previously, the fields in the vmsds of 'riscv_aplic' and 'riscv_imsic' can only be initialized under certain special conditions in commit 95a97b3fd2. However, the corresponding ses of these vmsds are inserted into the savevm_state.handlers unconditionally. This led to migration failure characterized by uninitialized fields when save vm state: qemu-system-riscv64: ../migration/vmstate.c:433: vmstate_save_state_v: Assertion 'first_elem || !n_elems || !size' failed. Fixes: 95a97b3fd2 ("target/riscv: update APLIC and IMSIC to support KVM AIA") Signed-off-by: Xuemei Liu <liu.xuemei1@zte.com.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250616150034827wuHs_ffe3Qm8cqFXT7HeW@zte.com.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/intc/riscv_aplic.c | 12 ++++++++++-- hw/intc/riscv_imsic.c | 10 ++++++++-- 2 files changed, 18 insertions(+), 4 deletions(-) diff --git a/hw/intc/riscv_aplic.c b/hw/intc/riscv_aplic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/riscv_aplic.c +++ b/hw/intc/riscv_aplic.c @@ -XXX,XX +XXX,XX @@ static const Property riscv_aplic_properties[] = { DEFINE_PROP_BOOL("mmode", RISCVAPLICState, mmode, 0), }; +static bool riscv_aplic_state_needed(void *opaque) +{ + RISCVAPLICState *aplic = opaque; + + return riscv_use_emulated_aplic(aplic->msimode); +} + static const VMStateDescription vmstate_riscv_aplic = { .name = "riscv_aplic", - .version_id = 2, - .minimum_version_id = 2, + .version_id = 3, + .minimum_version_id = 3, + .needed = riscv_aplic_state_needed, .fields = (const VMStateField[]) { VMSTATE_UINT32(domaincfg, RISCVAPLICState), VMSTATE_UINT32(mmsicfgaddr, RISCVAPLICState), diff --git a/hw/intc/riscv_imsic.c b/hw/intc/riscv_imsic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/riscv_imsic.c +++ b/hw/intc/riscv_imsic.c @@ -XXX,XX +XXX,XX @@ static const Property riscv_imsic_properties[] = { DEFINE_PROP_UINT32("num-irqs", RISCVIMSICState, num_irqs, 0), }; +static bool riscv_imsic_state_needed(void *opaque) +{ + return !kvm_irqchip_in_kernel(); +} + static const VMStateDescription vmstate_riscv_imsic = { .name = "riscv_imsic", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, + .needed = riscv_imsic_state_needed, .fields = (const VMStateField[]) { VMSTATE_VARRAY_UINT32(eidelivery, RISCVIMSICState, num_pages, 0, -- 2.50.0 From: Charalampos Mitrodimas <charmitro@posteo.net> According to the RISC-V Privileged Architecture specification, the low bit of MEPC/SEPC must always be zero. When IALIGN=32, the two low bits must be zero. This commit fixes the behavior of MEPC/SEPC CSR reads and writes, and the implicit reads by MRET/SRET instructions to properly mask the lowest bit(s) based on whether the C extension is enabled: - When C extension is enabled (IALIGN=16): mask bit 0 - When C extension is disabled (IALIGN=32): mask bits [1:0] Previously, when vectored mode bits from STVEC (which sets bit 0 for vectored mode) were written to MEPC, the bits would not be cleared correctly, causing incorrect behavior on MRET. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2855 Signed-off-by: Charalampos Mitrodimas <charmitro@posteo.net> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20250703182157.281320-2-charmitro@posteo.net> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/internals.h | 11 +++++++++++ target/riscv/csr.c | 8 ++++---- target/riscv/op_helper.c | 4 ++-- 3 files changed, 17 insertions(+), 6 deletions(-) diff --git a/target/riscv/internals.h b/target/riscv/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/internals.h +++ b/target/riscv/internals.h @@ -XXX,XX +XXX,XX @@ static inline float16 check_nanbox_bf16(CPURISCVState *env, uint64_t f) } } +static inline target_ulong get_xepc_mask(CPURISCVState *env) +{ + /* When IALIGN=32, both low bits must be zero. + * When IALIGN=16 (has C extension), only bit 0 must be zero. */ + if (riscv_has_ext(env, RVC)) { + return ~(target_ulong)1; + } else { + return ~(target_ulong)3; + } +} + #ifndef CONFIG_USER_ONLY /* Our implementation of SysemuCPUOps::has_work */ bool riscv_cpu_has_work(CPUState *cs); diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException write_mscratch(CPURISCVState *env, int csrno, static RISCVException read_mepc(CPURISCVState *env, int csrno, target_ulong *val) { - *val = env->mepc; + *val = env->mepc & get_xepc_mask(env); return RISCV_EXCP_NONE; } static RISCVException write_mepc(CPURISCVState *env, int csrno, target_ulong val, uintptr_t ra) { - env->mepc = val; + env->mepc = val & get_xepc_mask(env); return RISCV_EXCP_NONE; } @@ -XXX,XX +XXX,XX @@ static RISCVException write_sscratch(CPURISCVState *env, int csrno, static RISCVException read_sepc(CPURISCVState *env, int csrno, target_ulong *val) { - *val = env->sepc; + *val = env->sepc & get_xepc_mask(env); return RISCV_EXCP_NONE; } static RISCVException write_sepc(CPURISCVState *env, int csrno, target_ulong val, uintptr_t ra) { - env->sepc = val; + env->sepc = val & get_xepc_mask(env); return RISCV_EXCP_NONE; } diff --git a/target/riscv/op_helper.c b/target/riscv/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/op_helper.c +++ b/target/riscv/op_helper.c @@ -XXX,XX +XXX,XX @@ target_ulong helper_sret(CPURISCVState *env) riscv_raise_exception(env, RISCV_EXCP_ILLEGAL_INST, GETPC()); } - target_ulong retpc = env->sepc; + target_ulong retpc = env->sepc & get_xepc_mask(env); if (!riscv_cpu_allow_16bit_insn(&env_archcpu(env)->cfg, env->priv_ver, env->misa_ext) && (retpc & 0x3)) { @@ -XXX,XX +XXX,XX @@ static target_ulong ssdbltrp_mxret(CPURISCVState *env, target_ulong mstatus, target_ulong helper_mret(CPURISCVState *env) { - target_ulong retpc = env->mepc; + target_ulong retpc = env->mepc & get_xepc_mask(env); uint64_t mstatus = env->mstatus; target_ulong prev_priv = get_field(mstatus, MSTATUS_MPP); -- 2.50.0 From: Charalampos Mitrodimas <charmitro@posteo.net> Add a regression test to verify that MEPC properly masks the lower bits when an address with mode bits is written to it, as required by the RISC-V Privileged Architecture specification. The test sets STVEC to an address with bit 0 set (vectored mode), triggers an illegal instruction exception, copies STVEC to MEPC in the trap handler, and verifies that MEPC masks bits [1:0] correctly for IALIGN=32. Without the fix, MEPC retains the mode bits (returns non-zero/FAIL). With the fix, MEPC clears bits [1:0] (returns 0/PASS). Signed-off-by: Charalampos Mitrodimas <charmitro@posteo.net> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20250703182157.281320-3-charmitro@posteo.net> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- tests/tcg/riscv64/Makefile.softmmu-target | 4 ++ tests/tcg/riscv64/test-mepc-masking.S | 73 +++++++++++++++++++++++ 2 files changed, 77 insertions(+) create mode 100644 tests/tcg/riscv64/test-mepc-masking.S diff --git a/tests/tcg/riscv64/Makefile.softmmu-target b/tests/tcg/riscv64/Makefile.softmmu-target index XXXXXXX..XXXXXXX 100644 --- a/tests/tcg/riscv64/Makefile.softmmu-target +++ b/tests/tcg/riscv64/Makefile.softmmu-target @@ -XXX,XX +XXX,XX @@ EXTRA_RUNS += run-issue1060 run-issue1060: issue1060 $(call run-test, $<, $(QEMU) $(QEMU_OPTS)$<) +EXTRA_RUNS += run-test-mepc-masking +run-test-mepc-masking: test-mepc-masking + $(call run-test, $<, $(QEMU) $(QEMU_OPTS)$<) + # We don't currently support the multiarch system tests undefine MULTIARCH_TESTS diff --git a/tests/tcg/riscv64/test-mepc-masking.S b/tests/tcg/riscv64/test-mepc-masking.S new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/tcg/riscv64/test-mepc-masking.S @@ -XXX,XX +XXX,XX @@ +/* + * Test for MEPC masking bug fix + * + * This test verifies that MEPC properly masks the lower bits according + * to the RISC-V specification when vectored mode bits from STVEC are + * written to MEPC. + */ + + .option norvc + + .text + .global _start +_start: + /* Set up machine trap vector */ + lla t0, machine_trap_handler + csrw mtvec, t0 + + /* Set STVEC with vectored mode (mode bits = 01) */ + li t0, 0x80004001 + csrw stvec, t0 + + /* Clear medeleg to handle exceptions in M-mode */ + csrw medeleg, zero + + /* Trigger illegal instruction exception */ + .word 0xffffffff + +test_completed: + /* Exit with result in a0 */ + /* a0 = 0: success (bits [1:0] were masked) */ + /* a0 != 0: failure (some bits were not masked) */ + j _exit + +machine_trap_handler: + /* Check if illegal instruction (mcause = 2) */ + csrr t0, mcause + li t1, 2 + bne t0, t1, skip_test + + /* Test: Copy STVEC (with mode bits) to MEPC */ + csrr t0, stvec /* t0 = 0x80004001 */ + csrw mepc, t0 /* Write to MEPC */ + csrr t1, mepc /* Read back MEPC */ + + /* Check if bits [1:0] are masked (IALIGN=32 without RVC) */ + andi a0, t1, 3 /* a0 = 0 if both bits masked correctly */ + + /* Set correct return address */ + lla t0, test_completed + csrw mepc, t0 + +skip_test: + mret + +/* Exit with semihosting */ +_exit: + lla a1, semiargs + li t0, 0x20026 /* ADP_Stopped_ApplicationExit */ + sd t0, 0(a1) + sd a0, 8(a1) + li a0, 0x20 /* TARGET_SYS_EXIT_EXTENDED */ + + /* Semihosting call sequence */ + .balign 16 + slli zero, zero, 0x1f + ebreak + srai zero, zero, 0x7 + j . + + .data + .balign 8 +semiargs: + .space 16 -- 2.50.0 From: Vasilis Liaskovitis <vliaskovitis@suse.com> Usage of vsetvli instruction is reserved if VLMAX is changed when vsetvli rs1 and rd arguments are x0. In this case, if the new property is true, only the vill bit will be set. See https://github.com/riscv/riscv-isa-manual/blob/main/src/v-st-ext.adoc#avl-encoding According to the spec, the above use cases are reserved, and "Implementations may set vill in either case." Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2422 Signed-off-by: Vasilis Liaskovitis <vliaskovitis@suse.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20250618213542.22873-1-vliaskovitis@suse.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/helper.h | 2 +- target/riscv/cpu_cfg_fields.h.inc | 1 + target/riscv/cpu.c | 1 + target/riscv/vector_helper.c | 12 +++++++++++- target/riscv/insn_trans/trans_rvv.c.inc | 4 ++-- 5 files changed, 16 insertions(+), 4 deletions(-) diff --git a/target/riscv/helper.h b/target/riscv/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/helper.h +++ b/target/riscv/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_3(hyp_hsv_d, TCG_CALL_NO_WG, void, env, tl, tl) #endif /* Vector functions */ -DEF_HELPER_3(vsetvl, tl, env, tl, tl) +DEF_HELPER_4(vsetvl, tl, env, tl, tl, tl) DEF_HELPER_5(vle8_v, void, ptr, ptr, tl, env, i32) DEF_HELPER_5(vle16_v, void, ptr, ptr, tl, env, i32) DEF_HELPER_5(vle32_v, void, ptr, ptr, tl, env, i32) diff --git a/target/riscv/cpu_cfg_fields.h.inc b/target/riscv/cpu_cfg_fields.h.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_cfg_fields.h.inc +++ b/target/riscv/cpu_cfg_fields.h.inc @@ -XXX,XX +XXX,XX @@ BOOL_FIELD(ext_supm) BOOL_FIELD(rvv_ta_all_1s) BOOL_FIELD(rvv_ma_all_1s) BOOL_FIELD(rvv_vl_half_avl) +BOOL_FIELD(rvv_vsetvl_x0_vill) /* Named features */ BOOL_FIELD(ext_svade) BOOL_FIELD(ext_zic64b) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static const Property riscv_cpu_properties[] = { DEFINE_PROP_BOOL("rvv_ta_all_1s", RISCVCPU, cfg.rvv_ta_all_1s, false), DEFINE_PROP_BOOL("rvv_ma_all_1s", RISCVCPU, cfg.rvv_ma_all_1s, false), DEFINE_PROP_BOOL("rvv_vl_half_avl", RISCVCPU, cfg.rvv_vl_half_avl, false), + DEFINE_PROP_BOOL("rvv_vsetvl_x0_vill", RISCVCPU, cfg.rvv_vsetvl_x0_vill, false), /* * write_misa() is marked as experimental for now so mark diff --git a/target/riscv/vector_helper.c b/target/riscv/vector_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/vector_helper.c +++ b/target/riscv/vector_helper.c @@ -XXX,XX +XXX,XX @@ #include <math.h> target_ulong HELPER(vsetvl)(CPURISCVState *env, target_ulong s1, - target_ulong s2) + target_ulong s2, target_ulong x0) { int vlmax, vl; RISCVCPU *cpu = env_archcpu(env); @@ -XXX,XX +XXX,XX @@ target_ulong HELPER(vsetvl)(CPURISCVState *env, target_ulong s1, } else { vl = vlmax; } + + if (cpu->cfg.rvv_vsetvl_x0_vill && x0 && (env->vl != vl)) { + /* only set vill bit. */ + env->vill = 1; + env->vtype = 0; + env->vl = 0; + env->vstart = 0; + return 0; + } + env->vl = vl; env->vtype = s2; env->vstart = 0; diff --git a/target/riscv/insn_trans/trans_rvv.c.inc b/target/riscv/insn_trans/trans_rvv.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_rvv.c.inc +++ b/target/riscv/insn_trans/trans_rvv.c.inc @@ -XXX,XX +XXX,XX @@ static bool do_vsetvl(DisasContext *s, int rd, int rs1, TCGv s2) s1 = get_gpr(s, rs1, EXT_ZERO); } - gen_helper_vsetvl(dst, tcg_env, s1, s2); + gen_helper_vsetvl(dst, tcg_env, s1, s2, tcg_constant_tl((int) (rd == 0 && rs1 == 0))); gen_set_gpr(s, rd, dst); finalize_rvv_inst(s); @@ -XXX,XX +XXX,XX @@ static bool do_vsetivli(DisasContext *s, int rd, TCGv s1, TCGv s2) dst = dest_gpr(s, rd); - gen_helper_vsetvl(dst, tcg_env, s1, s2); + gen_helper_vsetvl(dst, tcg_env, s1, s2, tcg_constant_tl(0)); gen_set_gpr(s, rd, dst); finalize_rvv_inst(s); gen_update_pc(s, s->cur_insn_len); -- 2.50.0 From: Alexandre Ghiti <alexghiti@rivosinc.com> The Svrsw60t59b extension allows to free the PTE reserved bits 60 and 59 for software to use. Reviewed-by: Deepak Gupta <debug@rivosinc.com> Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Nutty Liu<liujingqi@lanxincomputing.com> Message-ID: <20250702-dev-alex-svrsw60b59b_v2-v2-1-504ddf0f8530@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu-bits.h | 1 + target/riscv/cpu_bits.h | 3 ++- target/riscv/cpu_cfg_fields.h.inc | 1 + hw/riscv/riscv-iommu.c | 3 ++- target/riscv/cpu.c | 2 ++ target/riscv/cpu_helper.c | 3 ++- target/riscv/tcg/tcg-cpu.c | 8 ++++++++ 7 files changed, 18 insertions(+), 3 deletions(-) diff --git a/hw/riscv/riscv-iommu-bits.h b/hw/riscv/riscv-iommu-bits.h index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu-bits.h +++ b/hw/riscv/riscv-iommu-bits.h @@ -XXX,XX +XXX,XX @@ struct riscv_iommu_pq_record { #define RISCV_IOMMU_CAP_SV39 BIT_ULL(9) #define RISCV_IOMMU_CAP_SV48 BIT_ULL(10) #define RISCV_IOMMU_CAP_SV57 BIT_ULL(11) +#define RISCV_IOMMU_CAP_SVRSW60T59B BIT_ULL(14) #define RISCV_IOMMU_CAP_SV32X4 BIT_ULL(16) #define RISCV_IOMMU_CAP_SV39X4 BIT_ULL(17) #define RISCV_IOMMU_CAP_SV48X4 BIT_ULL(18) diff --git a/target/riscv/cpu_bits.h b/target/riscv/cpu_bits.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_bits.h +++ b/target/riscv/cpu_bits.h @@ -XXX,XX +XXX,XX @@ typedef enum { #define PTE_SOFT 0x300 /* Reserved for Software */ #define PTE_PBMT 0x6000000000000000ULL /* Page-based memory types */ #define PTE_N 0x8000000000000000ULL /* NAPOT translation */ -#define PTE_RESERVED 0x1FC0000000000000ULL /* Reserved bits */ +#define PTE_RESERVED(svrsw60t59b) \ + (svrsw60t59b ? 0x07C0000000000000ULL : 0x1FC0000000000000ULL) /* Reserved bits */ #define PTE_ATTR (PTE_N | PTE_PBMT) /* All attributes bits */ /* Page table PPN shift amount */ diff --git a/target/riscv/cpu_cfg_fields.h.inc b/target/riscv/cpu_cfg_fields.h.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_cfg_fields.h.inc +++ b/target/riscv/cpu_cfg_fields.h.inc @@ -XXX,XX +XXX,XX @@ BOOL_FIELD(ext_svadu) BOOL_FIELD(ext_svinval) BOOL_FIELD(ext_svnapot) BOOL_FIELD(ext_svpbmt) +BOOL_FIELD(ext_svrsw60t59b) BOOL_FIELD(ext_svvptc) BOOL_FIELD(ext_svukte) BOOL_FIELD(ext_zdinx) diff --git a/hw/riscv/riscv-iommu.c b/hw/riscv/riscv-iommu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.c +++ b/hw/riscv/riscv-iommu.c @@ -XXX,XX +XXX,XX @@ static void riscv_iommu_realize(DeviceState *dev, Error **errp) } if (s->enable_g_stage) { s->cap |= RISCV_IOMMU_CAP_SV32X4 | RISCV_IOMMU_CAP_SV39X4 | - RISCV_IOMMU_CAP_SV48X4 | RISCV_IOMMU_CAP_SV57X4; + RISCV_IOMMU_CAP_SV48X4 | RISCV_IOMMU_CAP_SV57X4 | + RISCV_IOMMU_CAP_SVRSW60T59B; } if (s->hpm_cntrs > 0) { diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(svinval, PRIV_VERSION_1_12_0, ext_svinval), ISA_EXT_DATA_ENTRY(svnapot, PRIV_VERSION_1_12_0, ext_svnapot), ISA_EXT_DATA_ENTRY(svpbmt, PRIV_VERSION_1_12_0, ext_svpbmt), + ISA_EXT_DATA_ENTRY(svrsw60t59b, PRIV_VERSION_1_13_0, ext_svrsw60t59b), ISA_EXT_DATA_ENTRY(svukte, PRIV_VERSION_1_13_0, ext_svukte), ISA_EXT_DATA_ENTRY(svvptc, PRIV_VERSION_1_13_0, ext_svvptc), ISA_EXT_DATA_ENTRY(xtheadba, PRIV_VERSION_1_11_0, ext_xtheadba), @@ -XXX,XX +XXX,XX @@ const RISCVCPUMultiExtConfig riscv_cpu_extensions[] = { MULTI_EXT_CFG_BOOL("svinval", ext_svinval, false), MULTI_EXT_CFG_BOOL("svnapot", ext_svnapot, false), MULTI_EXT_CFG_BOOL("svpbmt", ext_svpbmt, false), + MULTI_EXT_CFG_BOOL("svrsw60t59b", ext_svrsw60t59b, false), MULTI_EXT_CFG_BOOL("svvptc", ext_svvptc, true), MULTI_EXT_CFG_BOOL("zicntr", ext_zicntr, true), diff --git a/target/riscv/cpu_helper.c b/target/riscv/cpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_helper.c +++ b/target/riscv/cpu_helper.c @@ -XXX,XX +XXX,XX @@ static int get_physical_address(CPURISCVState *env, hwaddr *physical, bool svade = riscv_cpu_cfg(env)->ext_svade; bool svadu = riscv_cpu_cfg(env)->ext_svadu; bool adue = svadu ? env->menvcfg & MENVCFG_ADUE : !svade; + bool svrsw60t59b = riscv_cpu_cfg(env)->ext_svrsw60t59b; if (first_stage && two_stage && env->virt_enabled) { pbmte = pbmte && (env->henvcfg & HENVCFG_PBMTE); @@ -XXX,XX +XXX,XX @@ static int get_physical_address(CPURISCVState *env, hwaddr *physical, if (riscv_cpu_sxl(env) == MXL_RV32) { ppn = pte >> PTE_PPN_SHIFT; } else { - if (pte & PTE_RESERVED) { + if (pte & PTE_RESERVED(svrsw60t59b)) { qemu_log_mask(LOG_GUEST_ERROR, "%s: reserved bits set in PTE: " "addr: 0x%" HWADDR_PRIx " pte: 0x" TARGET_FMT_lx "\n", __func__, pte_addr, pte); diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ void riscv_cpu_validate_set_extensions(RISCVCPU *cpu, Error **errp) cpu->cfg.ext_ssctr = false; } + if (cpu->cfg.ext_svrsw60t59b && + (!cpu->cfg.mmu || mcc->def->misa_mxl_max == MXL_RV32)) { + error_setg(errp, "svrsw60t59b is not supported on RV32 and MMU-less platforms"); + return; + } + /* * Disable isa extensions based on priv spec after we * validated and set everything we need. @@ -XXX,XX +XXX,XX @@ static void riscv_init_max_cpu_extensions(Object *obj) if (env->misa_mxl != MXL_RV32) { isa_ext_update_enabled(cpu, CPU_CFG_OFFSET(ext_zcf), false); + } else { + isa_ext_update_enabled(cpu, CPU_CFG_OFFSET(ext_svrsw60t59b), false); } /* -- 2.50.0