The following changes since commit 4eac9dfbd72d346505642fb45ac3141c7eb2c516: Merge tag 'pull-tcg-20240301' of https://gitlab.com/rth7680/qemu into staging (2024-03-05 09:45:22 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20240305 for you to fetch changes up to 7558300c53057126514ee0fd5cf629c65ccc20e1: qemu-options.hx: Don't claim "-serial" has limit of 4 serial ports (2024-03-05 13:22:56 +0000) ---------------------------------------------------------------- target-arm queue: * raspi: Implement Broadcom Serial Controller (BSC) for BCM2835 boards * hw/char/pl011: Add support for loopback * STM32L4x5: Implement RCC clock control device * target/arm: Do memory type alignment checks * atomic.h: Reword confusing comment for qatomic_cmpxchg * qemu-options.hx: Don't claim "-serial" has limit of 4 serial ports ---------------------------------------------------------------- Arnaud Minier (8): hw/misc/stm32l4x5_rcc: Implement STM32L4x5_RCC skeleton hw/misc/stm32l4x5_rcc: Add an internal clock multiplexer object hw/misc/stm32l4x5_rcc: Add an internal PLL Clock object hw/misc/stm32l4x5_rcc: Initialize PLLs and clock multiplexers hw/misc/stm32l4x5_rcc: Handle Register Updates hw/misc/stm32l4x5_rcc: Add write protections to CR register hw/arm/stm32l4x5_soc.c: Use the RCC Sysclk tests/qtest/stm32l4x5_rcc-test.c: Add tests for the STM32L4x5_RCC Peter Maydell (1): atomic.h: Reword confusing comment for qatomic_cmpxchg Rayhan Faizel (3): hw/i2c: Implement Broadcom Serial Controller (BSC) hw/arm: Connect BSC to BCM2835 board as I2C0, I2C1 and I2C2 tests/qtest: Add testcase for BCM2835 BSC Richard Henderson (6): target/arm: Support 32-byte alignment in pow2_align exec/memattrs: Remove target_tlb_bit* accel/tcg: Add tlb_fill_flags to CPUTLBEntryFull accel/tcg: Add TLB_CHECK_ALIGNED target/arm: Do memory type alignment check when translation disabled target/arm: Do memory type alignment check when translation enabled Steven Shen (1): qemu-options.hx: Don't claim "-serial" has limit of 4 serial ports Tong Ho (1): hw/char/pl011: Add support for loopback MAINTAINERS | 5 +- docs/system/arm/b-l475e-iot01a.rst | 2 +- docs/system/arm/raspi.rst | 1 + include/exec/cpu-all.h | 4 +- include/exec/memattrs.h | 12 - include/hw/arm/bcm2835_peripherals.h | 4 +- include/hw/arm/stm32l4x5_soc.h | 5 +- include/hw/core/cpu.h | 3 + include/hw/i2c/bcm2835_i2c.h | 80 ++ include/hw/misc/stm32l4x5_rcc.h | 239 +++++ include/hw/misc/stm32l4x5_rcc_internals.h | 1042 +++++++++++++++++++++ include/qemu/atomic.h | 2 +- accel/tcg/cputlb.c | 35 +- hw/arm/b-l475e-iot01a.c | 10 +- hw/arm/bcm2835_peripherals.c | 45 +- hw/arm/stm32l4x5_soc.c | 45 +- hw/char/pl011.c | 110 ++- hw/i2c/bcm2835_i2c.c | 282 ++++++ hw/misc/stm32l4x5_rcc.c | 1457 +++++++++++++++++++++++++++++ target/arm/ptw.c | 39 + target/arm/tcg/hflags.c | 34 +- target/arm/tcg/translate.c | 8 +- target/sparc/mmu_helper.c | 2 +- tests/qtest/bcm2835-i2c-test.c | 115 +++ tests/qtest/stm32l4x5_rcc-test.c | 189 ++++ hw/arm/Kconfig | 2 + hw/i2c/Kconfig | 4 + hw/i2c/meson.build | 1 + hw/misc/Kconfig | 3 + hw/misc/meson.build | 1 + hw/misc/trace-events | 14 + qemu-options.hx | 2 +- tests/qtest/meson.build | 5 +- 33 files changed, 3718 insertions(+), 84 deletions(-) create mode 100644 include/hw/i2c/bcm2835_i2c.h create mode 100644 include/hw/misc/stm32l4x5_rcc.h create mode 100644 include/hw/misc/stm32l4x5_rcc_internals.h create mode 100644 hw/i2c/bcm2835_i2c.c create mode 100644 hw/misc/stm32l4x5_rcc.c create mode 100644 tests/qtest/bcm2835-i2c-test.c create mode 100644 tests/qtest/stm32l4x5_rcc-test.c From: Rayhan Faizel <rayhan.faizel@gmail.com> A few deficiencies in the current device model need to be noted. 1. FIFOs are not used. All sends and receives are done directly. 2. Repeated starts are not emulated. Repeated starts can be triggered in real hardware by sending a new read transfer request in the window time between transfer active set of write transfer request and done bit set of the same. Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240224191038.2409945-2-rayhan.faizel@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/raspi.rst | 1 + include/hw/i2c/bcm2835_i2c.h | 80 ++++++++++ hw/i2c/bcm2835_i2c.c | 282 +++++++++++++++++++++++++++++++++++ hw/i2c/Kconfig | 4 + hw/i2c/meson.build | 1 + 5 files changed, 368 insertions(+) create mode 100644 include/hw/i2c/bcm2835_i2c.h create mode 100644 hw/i2c/bcm2835_i2c.c diff --git a/docs/system/arm/raspi.rst b/docs/system/arm/raspi.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/raspi.rst +++ b/docs/system/arm/raspi.rst @@ -XXX,XX +XXX,XX @@ Implemented devices * MailBox controller (MBOX) * VideoCore firmware (property) * Peripheral SPI controller (SPI) + * Broadcom Serial Controller (I2C) Missing devices --------------- diff --git a/include/hw/i2c/bcm2835_i2c.h b/include/hw/i2c/bcm2835_i2c.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/i2c/bcm2835_i2c.h @@ -XXX,XX +XXX,XX @@ +/* + * Broadcom Serial Controller (BSC) + * + * Copyright (c) 2024 Rayhan Faizel <rayhan.faizel@gmail.com> + * + * SPDX-License-Identifier: MIT + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "hw/sysbus.h" +#include "hw/i2c/i2c.h" +#include "qom/object.h" + +#define TYPE_BCM2835_I2C "bcm2835-i2c" +OBJECT_DECLARE_SIMPLE_TYPE(BCM2835I2CState, BCM2835_I2C) + +#define BCM2835_I2C_C 0x0 /* Control */ +#define BCM2835_I2C_S 0x4 /* Status */ +#define BCM2835_I2C_DLEN 0x8 /* Data Length */ +#define BCM2835_I2C_A 0xc /* Slave Address */ +#define BCM2835_I2C_FIFO 0x10 /* FIFO */ +#define BCM2835_I2C_DIV 0x14 /* Clock Divider */ +#define BCM2835_I2C_DEL 0x18 /* Data Delay */ +#define BCM2835_I2C_CLKT 0x20 /* Clock Stretch Timeout */ + +#define BCM2835_I2C_C_I2CEN BIT(15) /* I2C enable */ +#define BCM2835_I2C_C_INTR BIT(10) /* Interrupt on RXR */ +#define BCM2835_I2C_C_INTT BIT(9) /* Interrupt on TXW */ +#define BCM2835_I2C_C_INTD BIT(8) /* Interrupt on DONE */ +#define BCM2835_I2C_C_ST BIT(7) /* Start transfer */ +#define BCM2835_I2C_C_CLEAR (BIT(5) | BIT(4)) /* Clear FIFO */ +#define BCM2835_I2C_C_READ BIT(0) /* I2C read mode */ + +#define BCM2835_I2C_S_CLKT BIT(9) /* Clock stretch timeout */ +#define BCM2835_I2C_S_ERR BIT(8) /* Slave error */ +#define BCM2835_I2C_S_RXF BIT(7) /* RX FIFO full */ +#define BCM2835_I2C_S_TXE BIT(6) /* TX FIFO empty */ +#define BCM2835_I2C_S_RXD BIT(5) /* RX bytes available */ +#define BCM2835_I2C_S_TXD BIT(4) /* TX space available */ +#define BCM2835_I2C_S_RXR BIT(3) /* RX FIFO needs reading */ +#define BCM2835_I2C_S_TXW BIT(2) /* TX FIFO needs writing */ +#define BCM2835_I2C_S_DONE BIT(1) /* I2C Transfer complete */ +#define BCM2835_I2C_S_TA BIT(0) /* I2C Transfer active */ + +struct BCM2835I2CState { + /* <private> */ + SysBusDevice parent_obj; + + /* <public> */ + MemoryRegion iomem; + I2CBus *bus; + qemu_irq irq; + + uint32_t c; + uint32_t s; + uint32_t dlen; + uint32_t a; + uint32_t div; + uint32_t del; + uint32_t clkt; + + uint32_t last_dlen; +}; diff --git a/hw/i2c/bcm2835_i2c.c b/hw/i2c/bcm2835_i2c.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/i2c/bcm2835_i2c.c @@ -XXX,XX +XXX,XX @@ +/* + * Broadcom Serial Controller (BSC) + * + * Copyright (c) 2024 Rayhan Faizel <rayhan.faizel@gmail.com> + * + * SPDX-License-Identifier: MIT + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "hw/i2c/bcm2835_i2c.h" +#include "hw/irq.h" +#include "migration/vmstate.h" + +static void bcm2835_i2c_update_interrupt(BCM2835I2CState *s) +{ + int do_interrupt = 0; + /* Interrupt on RXR (Needs reading) */ + if (s->c & BCM2835_I2C_C_INTR && s->s & BCM2835_I2C_S_RXR) { + do_interrupt = 1; + } + + /* Interrupt on TXW (Needs writing) */ + if (s->c & BCM2835_I2C_C_INTT && s->s & BCM2835_I2C_S_TXW) { + do_interrupt = 1; + } + + /* Interrupt on DONE (Transfer complete) */ + if (s->c & BCM2835_I2C_C_INTD && s->s & BCM2835_I2C_S_DONE) { + do_interrupt = 1; + } + qemu_set_irq(s->irq, do_interrupt); +} + +static void bcm2835_i2c_begin_transfer(BCM2835I2CState *s) +{ + int direction = s->c & BCM2835_I2C_C_READ; + if (i2c_start_transfer(s->bus, s->a, direction)) { + s->s |= BCM2835_I2C_S_ERR; + } + s->s |= BCM2835_I2C_S_TA; + + if (direction) { + s->s |= BCM2835_I2C_S_RXR | BCM2835_I2C_S_RXD; + } else { + s->s |= BCM2835_I2C_S_TXW; + } +} + +static void bcm2835_i2c_finish_transfer(BCM2835I2CState *s) +{ + /* + * STOP is sent when DLEN counts down to zero. + * + * https://github.com/torvalds/linux/blob/v6.7/drivers/i2c/busses/i2c-bcm2835.c#L223-L261 + * It is possible to initiate repeated starts on real hardware. + * However, this requires sending another ST request before the bytes in + * TX FIFO are shifted out. + * + * This is not emulated currently. + */ + i2c_end_transfer(s->bus); + s->s |= BCM2835_I2C_S_DONE; + + /* Ensure RXD is cleared, otherwise the driver registers an error */ + s->s &= ~(BCM2835_I2C_S_TA | BCM2835_I2C_S_RXR | + BCM2835_I2C_S_TXW | BCM2835_I2C_S_RXD); +} + +static uint64_t bcm2835_i2c_read(void *opaque, hwaddr addr, unsigned size) +{ + BCM2835I2CState *s = opaque; + uint32_t readval = 0; + + switch (addr) { + case BCM2835_I2C_C: + readval = s->c; + break; + case BCM2835_I2C_S: + readval = s->s; + break; + case BCM2835_I2C_DLEN: + readval = s->dlen; + break; + case BCM2835_I2C_A: + readval = s->a; + break; + case BCM2835_I2C_FIFO: + /* We receive I2C messages directly instead of using FIFOs */ + if (s->s & BCM2835_I2C_S_TA) { + readval = i2c_recv(s->bus); + s->dlen -= 1; + + if (s->dlen == 0) { + bcm2835_i2c_finish_transfer(s); + } + } + bcm2835_i2c_update_interrupt(s); + break; + case BCM2835_I2C_DIV: + readval = s->div; + break; + case BCM2835_I2C_DEL: + readval = s->del; + break; + case BCM2835_I2C_CLKT: + readval = s->clkt; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, addr); + } + + return readval; +} + +static void bcm2835_i2c_write(void *opaque, hwaddr addr, + uint64_t value, unsigned int size) +{ + BCM2835I2CState *s = opaque; + uint32_t writeval = value; + + switch (addr) { + case BCM2835_I2C_C: + /* ST is a one-shot operation; it must read back as 0 */ + s->c = writeval & ~BCM2835_I2C_C_ST; + + /* Start transfer */ + if (writeval & (BCM2835_I2C_C_ST | BCM2835_I2C_C_I2CEN)) { + bcm2835_i2c_begin_transfer(s); + /* + * Handle special case where transfer starts with zero data length. + * Required for zero length i2c quick messages to work. + */ + if (s->dlen == 0) { + bcm2835_i2c_finish_transfer(s); + } + } + + bcm2835_i2c_update_interrupt(s); + break; + case BCM2835_I2C_S: + if (writeval & BCM2835_I2C_S_DONE && s->s & BCM2835_I2C_S_DONE) { + /* When DONE is cleared, DLEN should read last written value. */ + s->dlen = s->last_dlen; + } + + /* Clear DONE, CLKT and ERR by writing 1 */ + s->s &= ~(writeval & (BCM2835_I2C_S_DONE | + BCM2835_I2C_S_ERR | BCM2835_I2C_S_CLKT)); + break; + case BCM2835_I2C_DLEN: + s->dlen = writeval; + s->last_dlen = writeval; + break; + case BCM2835_I2C_A: + s->a = writeval; + break; + case BCM2835_I2C_FIFO: + /* We send I2C messages directly instead of using FIFOs */ + if (s->s & BCM2835_I2C_S_TA) { + if (s->s & BCM2835_I2C_S_TXD) { + if (!i2c_send(s->bus, writeval & 0xff)) { + s->dlen -= 1; + } else { + s->s |= BCM2835_I2C_S_ERR; + } + } + + if (s->dlen == 0) { + bcm2835_i2c_finish_transfer(s); + } + } + bcm2835_i2c_update_interrupt(s); + break; + case BCM2835_I2C_DIV: + s->div = writeval; + break; + case BCM2835_I2C_DEL: + s->del = writeval; + break; + case BCM2835_I2C_CLKT: + s->clkt = writeval; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, addr); + } +} + +static const MemoryRegionOps bcm2835_i2c_ops = { + .read = bcm2835_i2c_read, + .write = bcm2835_i2c_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + }, +}; + +static void bcm2835_i2c_realize(DeviceState *dev, Error **errp) +{ + BCM2835I2CState *s = BCM2835_I2C(dev); + s->bus = i2c_init_bus(dev, NULL); + + memory_region_init_io(&s->iomem, OBJECT(dev), &bcm2835_i2c_ops, s, + TYPE_BCM2835_I2C, 0x24); + sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->iomem); + sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq); +} + +static void bcm2835_i2c_reset(DeviceState *dev) +{ + BCM2835I2CState *s = BCM2835_I2C(dev); + + /* Reset values according to BCM2835 Peripheral Documentation */ + s->c = 0x0; + s->s = BCM2835_I2C_S_TXD | BCM2835_I2C_S_TXE; + s->dlen = 0x0; + s->a = 0x0; + s->div = 0x5dc; + s->del = 0x00300030; + s->clkt = 0x40; +} + +static const VMStateDescription vmstate_bcm2835_i2c = { + .name = TYPE_BCM2835_I2C, + .version_id = 1, + .minimum_version_id = 1, + .fields = (const VMStateField[]) { + VMSTATE_UINT32(c, BCM2835I2CState), + VMSTATE_UINT32(s, BCM2835I2CState), + VMSTATE_UINT32(dlen, BCM2835I2CState), + VMSTATE_UINT32(a, BCM2835I2CState), + VMSTATE_UINT32(div, BCM2835I2CState), + VMSTATE_UINT32(del, BCM2835I2CState), + VMSTATE_UINT32(clkt, BCM2835I2CState), + VMSTATE_UINT32(last_dlen, BCM2835I2CState), + VMSTATE_END_OF_LIST() + } +}; + +static void bcm2835_i2c_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->reset = bcm2835_i2c_reset; + dc->realize = bcm2835_i2c_realize; + dc->vmsd = &vmstate_bcm2835_i2c; +} + +static const TypeInfo bcm2835_i2c_info = { + .name = TYPE_BCM2835_I2C, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(BCM2835I2CState), + .class_init = bcm2835_i2c_class_init, +}; + +static void bcm2835_i2c_register_types(void) +{ + type_register_static(&bcm2835_i2c_info); +} + +type_init(bcm2835_i2c_register_types) diff --git a/hw/i2c/Kconfig b/hw/i2c/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/Kconfig +++ b/hw/i2c/Kconfig @@ -XXX,XX +XXX,XX @@ config PCA954X config PMBUS bool select SMBUS + +config BCM2835_I2C + bool + select I2C diff --git a/hw/i2c/meson.build b/hw/i2c/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/meson.build +++ b/hw/i2c/meson.build @@ -XXX,XX +XXX,XX @@ i2c_ss.add(when: 'CONFIG_OMAP', if_true: files('omap_i2c.c')) i2c_ss.add(when: 'CONFIG_PPC4XX', if_true: files('ppc4xx_i2c.c')) i2c_ss.add(when: 'CONFIG_PCA954X', if_true: files('i2c_mux_pca954x.c')) i2c_ss.add(when: 'CONFIG_PMBUS', if_true: files('pmbus_device.c')) +i2c_ss.add(when: 'CONFIG_BCM2835_I2C', if_true: files('bcm2835_i2c.c')) system_ss.add_all(when: 'CONFIG_I2C', if_true: i2c_ss) -- 2.34.1 From: Rayhan Faizel <rayhan.faizel@gmail.com> BCM2835 has three I2C controllers. All of them share the same interrupt line. Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240224191038.2409945-3-rayhan.faizel@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/bcm2835_peripherals.h | 4 ++- hw/arm/bcm2835_peripherals.c | 45 ++++++++++++++++++++++++++-- hw/arm/Kconfig | 1 + 3 files changed, 46 insertions(+), 4 deletions(-) diff --git a/include/hw/arm/bcm2835_peripherals.h b/include/hw/arm/bcm2835_peripherals.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/bcm2835_peripherals.h +++ b/include/hw/arm/bcm2835_peripherals.h @@ -XXX,XX +XXX,XX @@ #include "hw/timer/bcm2835_systmr.h" #include "hw/usb/hcd-dwc2.h" #include "hw/ssi/bcm2835_spi.h" +#include "hw/i2c/bcm2835_i2c.h" #include "hw/misc/unimp.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct BCMSocPeripheralBaseState { BCM2835SDHostState sdhost; UnimplementedDeviceState i2s; BCM2835SPIState spi[1]; - UnimplementedDeviceState i2c[3]; + BCM2835I2CState i2c[3]; + OrIRQState orgated_i2c_irq; UnimplementedDeviceState otp; UnimplementedDeviceState dbus; UnimplementedDeviceState ave0; diff --git a/hw/arm/bcm2835_peripherals.c b/hw/arm/bcm2835_peripherals.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2835_peripherals.c +++ b/hw/arm/bcm2835_peripherals.c @@ -XXX,XX +XXX,XX @@ #define SEPARATE_DMA_IRQ_MAX 10 #define ORGATED_DMA_IRQ_COUNT 4 +/* All three I2C controllers share the same IRQ */ +#define ORGATED_I2C_IRQ_COUNT 3 + void create_unimp(BCMSocPeripheralBaseState *ps, UnimplementedDeviceState *uds, const char *name, hwaddr ofs, hwaddr size) @@ -XXX,XX +XXX,XX @@ static void raspi_peripherals_base_init(Object *obj) /* SPI */ object_initialize_child(obj, "bcm2835-spi0", &s->spi[0], TYPE_BCM2835_SPI); + + /* I2C */ + object_initialize_child(obj, "bcm2835-i2c0", &s->i2c[0], + TYPE_BCM2835_I2C); + object_initialize_child(obj, "bcm2835-i2c1", &s->i2c[1], + TYPE_BCM2835_I2C); + object_initialize_child(obj, "bcm2835-i2c2", &s->i2c[2], + TYPE_BCM2835_I2C); + + object_initialize_child(obj, "orgated-i2c-irq", + &s->orgated_i2c_irq, TYPE_OR_IRQ); + object_property_set_int(OBJECT(&s->orgated_i2c_irq), "num-lines", + ORGATED_I2C_IRQ_COUNT, &error_abort); } static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ void bcm_soc_peripherals_common_realize(DeviceState *dev, Error **errp) BCM2835_IC_GPU_IRQ, INTERRUPT_SPI)); + /* I2C */ + for (n = 0; n < 3; n++) { + if (!sysbus_realize(SYS_BUS_DEVICE(&s->i2c[n]), errp)) { + return; + } + } + + memory_region_add_subregion(&s->peri_mr, BSC0_OFFSET, + sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->i2c[0]), 0)); + memory_region_add_subregion(&s->peri_mr, BSC1_OFFSET, + sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->i2c[1]), 0)); + memory_region_add_subregion(&s->peri_mr, BSC2_OFFSET, + sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->i2c[2]), 0)); + + if (!qdev_realize(DEVICE(&s->orgated_i2c_irq), NULL, errp)) { + return; + } + for (n = 0; n < ORGATED_I2C_IRQ_COUNT; n++) { + sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c[n]), 0, + qdev_get_gpio_in(DEVICE(&s->orgated_i2c_irq), n)); + } + qdev_connect_gpio_out(DEVICE(&s->orgated_i2c_irq), 0, + qdev_get_gpio_in_named(DEVICE(&s->ic), + BCM2835_IC_GPU_IRQ, + INTERRUPT_I2C)); + create_unimp(s, &s->txp, "bcm2835-txp", TXP_OFFSET, 0x1000); create_unimp(s, &s->armtmr, "bcm2835-sp804", ARMCTRL_TIMER0_1_OFFSET, 0x40); create_unimp(s, &s->i2s, "bcm2835-i2s", I2S_OFFSET, 0x100); create_unimp(s, &s->smi, "bcm2835-smi", SMI_OFFSET, 0x100); create_unimp(s, &s->bscsl, "bcm2835-spis", BSC_SL_OFFSET, 0x100); - create_unimp(s, &s->i2c[0], "bcm2835-i2c0", BSC0_OFFSET, 0x20); - create_unimp(s, &s->i2c[1], "bcm2835-i2c1", BSC1_OFFSET, 0x20); - create_unimp(s, &s->i2c[2], "bcm2835-i2c2", BSC2_OFFSET, 0x20); create_unimp(s, &s->otp, "bcm2835-otp", OTP_OFFSET, 0x80); create_unimp(s, &s->dbus, "bcm2835-dbus", DBUS_OFFSET, 0x8000); create_unimp(s, &s->ave0, "bcm2835-ave0", AVE0_OFFSET, 0x8000); diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config RASPI select SDHCI select USB_DWC2 select BCM2835_SPI + select BCM2835_I2C config STM32F100_SOC bool -- 2.34.1 From: Rayhan Faizel <rayhan.faizel@gmail.com> Simple testcase for validating proper operation of read and write for all three BSC controllers. Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240224191038.2409945-4-rayhan.faizel@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/bcm2835-i2c-test.c | 115 +++++++++++++++++++++++++++++++++ tests/qtest/meson.build | 2 +- 2 files changed, 116 insertions(+), 1 deletion(-) create mode 100644 tests/qtest/bcm2835-i2c-test.c diff --git a/tests/qtest/bcm2835-i2c-test.c b/tests/qtest/bcm2835-i2c-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/bcm2835-i2c-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for Broadcom Serial Controller (BSC) + * + * Copyright (c) 2024 Rayhan Faizel <rayhan.faizel@gmail.com> + * + * SPDX-License-Identifier: MIT + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +#include "hw/i2c/bcm2835_i2c.h" +#include "hw/sensor/tmp105_regs.h" + +static const uint32_t bsc_base_addrs[] = { + 0x3f205000, /* I2C0 */ + 0x3f804000, /* I2C1 */ + 0x3f805000, /* I2C2 */ +}; + +static void bcm2835_i2c_init_transfer(uint32_t base_addr, bool read) +{ + /* read flag is bit 0 so we can write it directly */ + int interrupt = read ? BCM2835_I2C_C_INTR : BCM2835_I2C_C_INTT; + + writel(base_addr + BCM2835_I2C_C, + BCM2835_I2C_C_I2CEN | BCM2835_I2C_C_INTD | + BCM2835_I2C_C_ST | BCM2835_I2C_C_CLEAR | interrupt | read); +} + +static void test_i2c_read_write(gconstpointer data) +{ + uint32_t i2cdata; + intptr_t index = (intptr_t) data; + uint32_t base_addr = bsc_base_addrs[index]; + + /* Write to TMP105 register */ + writel(base_addr + BCM2835_I2C_A, 0x50); + writel(base_addr + BCM2835_I2C_DLEN, 3); + + bcm2835_i2c_init_transfer(base_addr, 0); + + writel(base_addr + BCM2835_I2C_FIFO, TMP105_REG_T_HIGH); + writel(base_addr + BCM2835_I2C_FIFO, 0xde); + writel(base_addr + BCM2835_I2C_FIFO, 0xad); + + /* Clear flags */ + writel(base_addr + BCM2835_I2C_S, BCM2835_I2C_S_DONE | BCM2835_I2C_S_ERR | + BCM2835_I2C_S_CLKT); + + /* Read from TMP105 register */ + writel(base_addr + BCM2835_I2C_A, 0x50); + writel(base_addr + BCM2835_I2C_DLEN, 1); + + bcm2835_i2c_init_transfer(base_addr, 0); + + writel(base_addr + BCM2835_I2C_FIFO, TMP105_REG_T_HIGH); + + writel(base_addr + BCM2835_I2C_DLEN, 2); + bcm2835_i2c_init_transfer(base_addr, 1); + + i2cdata = readl(base_addr + BCM2835_I2C_FIFO); + g_assert_cmpint(i2cdata, ==, 0xde); + + i2cdata = readl(base_addr + BCM2835_I2C_FIFO); + g_assert_cmpint(i2cdata, ==, 0xad); + + /* Clear flags */ + writel(base_addr + BCM2835_I2C_S, BCM2835_I2C_S_DONE | BCM2835_I2C_S_ERR | + BCM2835_I2C_S_CLKT); + +} + +int main(int argc, char **argv) +{ + int ret; + int i; + + g_test_init(&argc, &argv, NULL); + + for (i = 0; i < 3; i++) { + g_autofree char *test_name = + g_strdup_printf("/bcm2835/bcm2835-i2c%d/read_write", i); + qtest_add_data_func(test_name, (void *)(intptr_t) i, + test_i2c_read_write); + } + + /* Run I2C tests with TMP105 slaves on all three buses */ + qtest_start("-M raspi3b " + "-device tmp105,address=0x50,bus=i2c-bus.0 " + "-device tmp105,address=0x50,bus=i2c-bus.1 " + "-device tmp105,address=0x50,bus=i2c-bus.2"); + ret = g_test_run(); + qtest_end(); + + return ret; +} diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_aarch64 = \ ['tpm-tis-device-test', 'tpm-tis-device-swtpm-test'] : []) + \ (config_all_devices.has_key('CONFIG_XLNX_ZYNQMP_ARM') ? ['xlnx-can-test', 'fuzz-xlnx-dp-test'] : []) + \ (config_all_devices.has_key('CONFIG_XLNX_VERSAL') ? ['xlnx-canfd-test', 'xlnx-versal-trng-test'] : []) + \ - (config_all_devices.has_key('CONFIG_RASPI') ? ['bcm2835-dma-test'] : []) + \ + (config_all_devices.has_key('CONFIG_RASPI') ? ['bcm2835-dma-test', 'bcm2835-i2c-test'] : []) + \ (config_all_accel.has_key('CONFIG_TCG') and \ config_all_devices.has_key('CONFIG_TPM_TIS_I2C') ? ['tpm-tis-i2c-test'] : []) + \ ['arm-cpu-features', -- 2.34.1 From: Tong Ho <tong.ho@amd.com> This patch adds loopback for sent characters, sent BREAK, and modem-control signals. Loopback of send and modem-control is often used for uart self tests in real hardware but missing from current pl011 model, resulting in self-test failures when running in QEMU. This implementation matches what is observed in real pl011 hardware placed in loopback mode: 1. Input characters and BREAK events from serial backend are ignored, but 2. Both TX characters and BREAK events are still sent to serial backend, in addition to be looped back to RX. Signed-off-by: Tong Ho <tong.ho@amd.com> Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com> Message-id: 20240227054855.44204-1-tong.ho@amd.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/char/pl011.c | 110 +++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 108 insertions(+), 2 deletions(-) diff --git a/hw/char/pl011.c b/hw/char/pl011.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/pl011.c +++ b/hw/char/pl011.c @@ -XXX,XX +XXX,XX @@ DeviceState *pl011_create(hwaddr addr, qemu_irq irq, Chardev *chr) } /* Flag Register, UARTFR */ +#define PL011_FLAG_RI 0x100 #define PL011_FLAG_TXFE 0x80 #define PL011_FLAG_RXFF 0x40 #define PL011_FLAG_TXFF 0x20 #define PL011_FLAG_RXFE 0x10 +#define PL011_FLAG_DCD 0x04 +#define PL011_FLAG_DSR 0x02 +#define PL011_FLAG_CTS 0x01 /* Data Register, UARTDR */ #define DR_BE (1 << 10) @@ -XXX,XX +XXX,XX @@ DeviceState *pl011_create(hwaddr addr, qemu_irq irq, Chardev *chr) #define LCR_FEN (1 << 4) #define LCR_BRK (1 << 0) +/* Control Register, UARTCR */ +#define CR_OUT2 (1 << 13) +#define CR_OUT1 (1 << 12) +#define CR_RTS (1 << 11) +#define CR_DTR (1 << 10) +#define CR_LBE (1 << 7) + static const unsigned char pl011_id_arm[8] = { 0x11, 0x10, 0x14, 0x00, 0x0d, 0xf0, 0x05, 0xb1 }; static const unsigned char pl011_id_luminary[8] = @@ -XXX,XX +XXX,XX @@ static void pl011_trace_baudrate_change(const PL011State *s) s->ibrd, s->fbrd); } +static bool pl011_loopback_enabled(PL011State *s) +{ + return !!(s->cr & CR_LBE); +} + +static void pl011_loopback_mdmctrl(PL011State *s) +{ + uint32_t cr, fr, il; + + if (!pl011_loopback_enabled(s)) { + return; + } + + /* + * Loopback software-driven modem control outputs to modem status inputs: + * FR.RI <= CR.Out2 + * FR.DCD <= CR.Out1 + * FR.CTS <= CR.RTS + * FR.DSR <= CR.DTR + * + * The loopback happens immediately even if this call is triggered + * by setting only CR.LBE. + * + * CTS/RTS updates due to enabled hardware flow controls are not + * dealt with here. + */ + cr = s->cr; + fr = s->flags & ~(PL011_FLAG_RI | PL011_FLAG_DCD | + PL011_FLAG_DSR | PL011_FLAG_CTS); + fr |= (cr & CR_OUT2) ? PL011_FLAG_RI : 0; + fr |= (cr & CR_OUT1) ? PL011_FLAG_DCD : 0; + fr |= (cr & CR_RTS) ? PL011_FLAG_CTS : 0; + fr |= (cr & CR_DTR) ? PL011_FLAG_DSR : 0; + + /* Change interrupts based on updated FR */ + il = s->int_level & ~(INT_DSR | INT_DCD | INT_CTS | INT_RI); + il |= (fr & PL011_FLAG_DSR) ? INT_DSR : 0; + il |= (fr & PL011_FLAG_DCD) ? INT_DCD : 0; + il |= (fr & PL011_FLAG_CTS) ? INT_CTS : 0; + il |= (fr & PL011_FLAG_RI) ? INT_RI : 0; + + s->flags = fr; + s->int_level = il; + pl011_update(s); +} + +static void pl011_put_fifo(void *opaque, uint32_t value); + +static void pl011_loopback_tx(PL011State *s, uint32_t value) +{ + if (!pl011_loopback_enabled(s)) { + return; + } + + /* + * Caveat: + * + * In real hardware, TX loopback happens at the serial-bit level + * and then reassembled by the RX logics back into bytes and placed + * into the RX fifo. That is, loopback happens after TX fifo. + * + * Because the real hardware TX fifo is time-drained at the frame + * rate governed by the configured serial format, some loopback + * bytes in TX fifo may still be able to get into the RX fifo + * that could be full at times while being drained at software + * pace. + * + * In such scenario, the RX draining pace is the major factor + * deciding which loopback bytes get into the RX fifo, unless + * hardware flow-control is enabled. + * + * For simplicity, the above described is not emulated. + */ + pl011_put_fifo(s, value); +} + +static void pl011_loopback_break(PL011State *s, int brk_enable) +{ + if (brk_enable) { + pl011_loopback_tx(s, DR_BE); + } +} + static void pl011_write(void *opaque, hwaddr offset, uint64_t value, unsigned size) { @@ -XXX,XX +XXX,XX @@ static void pl011_write(void *opaque, hwaddr offset, /* XXX this blocks entire thread. Rewrite to use * qemu_chr_fe_write and background I/O callbacks */ qemu_chr_fe_write_all(&s->chr, &ch, 1); + pl011_loopback_tx(s, ch); s->int_level |= INT_TX; pl011_update(s); break; @@ -XXX,XX +XXX,XX @@ static void pl011_write(void *opaque, hwaddr offset, int break_enable = value & LCR_BRK; qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_SERIAL_SET_BREAK, &break_enable); + pl011_loopback_break(s, break_enable); } s->lcr = value; pl011_set_read_trigger(s); break; case 12: /* UARTCR */ - /* ??? Need to implement the enable and loopback bits. */ + /* ??? Need to implement the enable bit. */ s->cr = value; + pl011_loopback_mdmctrl(s); break; case 13: /* UARTIFS */ s->ifl = value; @@ -XXX,XX +XXX,XX @@ static void pl011_put_fifo(void *opaque, uint32_t value) static void pl011_receive(void *opaque, const uint8_t *buf, int size) { + /* + * In loopback mode, the RX input signal is internally disconnected + * from the entire receiving logics; thus, all inputs are ignored, + * and BREAK detection on RX input signal is also not performed. + */ + if (pl011_loopback_enabled(opaque)) { + return; + } + pl011_put_fifo(opaque, *buf); } static void pl011_event(void *opaque, QEMUChrEvent event) { - if (event == CHR_EVENT_BREAK) { + if (event == CHR_EVENT_BREAK && !pl011_loopback_enabled(opaque)) { pl011_put_fifo(opaque, DR_BE); } } -- 2.34.1 From: Arnaud Minier <arnaud.minier@telecom-paris.fr> Add the necessary files to add a simple RCC implementation with just reads from and writes to registers. Also instantiate the RCC in the STM32L4x5_SoC. It is needed for accurate emulation of all the SoC clocks and timers. Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240303140643.81957-2-arnaud.minier@telecom-paris.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 5 +- docs/system/arm/b-l475e-iot01a.rst | 2 +- include/hw/arm/stm32l4x5_soc.h | 2 + include/hw/misc/stm32l4x5_rcc.h | 80 ++++ include/hw/misc/stm32l4x5_rcc_internals.h | 286 ++++++++++++++ hw/arm/stm32l4x5_soc.c | 12 +- hw/misc/stm32l4x5_rcc.c | 446 ++++++++++++++++++++++ hw/arm/Kconfig | 1 + hw/misc/Kconfig | 3 + hw/misc/meson.build | 1 + hw/misc/trace-events | 4 + 11 files changed, 839 insertions(+), 3 deletions(-) create mode 100644 include/hw/misc/stm32l4x5_rcc.h create mode 100644 include/hw/misc/stm32l4x5_rcc_internals.h create mode 100644 hw/misc/stm32l4x5_rcc.c diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ M: Inès Varhol <ines.varhol@telecom-paris.fr> L: qemu-arm@nongnu.org S: Maintained F: hw/arm/stm32l4x5_soc.c -F: include/hw/arm/stm32l4x5_soc.h +F: hw/misc/stm32l4x5_exti.c +F: hw/misc/stm32l4x5_syscfg.c +F: hw/misc/stm32l4x5_rcc.c +F: include/hw/*/stm32l4x5_*.h B-L475E-IOT01A IoT Node M: Arnaud Minier <arnaud.minier@telecom-paris.fr> diff --git a/docs/system/arm/b-l475e-iot01a.rst b/docs/system/arm/b-l475e-iot01a.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/b-l475e-iot01a.rst +++ b/docs/system/arm/b-l475e-iot01a.rst @@ -XXX,XX +XXX,XX @@ Currently B-L475E-IOT01A machine's only supports the following devices: - Cortex-M4F based STM32L4x5 SoC - STM32L4x5 EXTI (Extended interrupts and events controller) - STM32L4x5 SYSCFG (System configuration controller) +- STM32L4x5 RCC (Reset and clock control) Missing devices """"""""""""""" The B-L475E-IOT01A does *not* support the following devices: -- Reset and clock control (RCC) - Serial ports (UART) - General-purpose I/Os (GPIO) - Analog to Digital Converter (ADC) diff --git a/include/hw/arm/stm32l4x5_soc.h b/include/hw/arm/stm32l4x5_soc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/stm32l4x5_soc.h +++ b/include/hw/arm/stm32l4x5_soc.h @@ -XXX,XX +XXX,XX @@ #include "hw/or-irq.h" #include "hw/misc/stm32l4x5_syscfg.h" #include "hw/misc/stm32l4x5_exti.h" +#include "hw/misc/stm32l4x5_rcc.h" #include "qom/object.h" #define TYPE_STM32L4X5_SOC "stm32l4x5-soc" @@ -XXX,XX +XXX,XX @@ struct Stm32l4x5SocState { Stm32l4x5ExtiState exti; OrIRQState exti_or_gates[NUM_EXTI_OR_GATES]; Stm32l4x5SyscfgState syscfg; + Stm32l4x5RccState rcc; MemoryRegion sram1; MemoryRegion sram2; diff --git a/include/hw/misc/stm32l4x5_rcc.h b/include/hw/misc/stm32l4x5_rcc.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/stm32l4x5_rcc.h @@ -XXX,XX +XXX,XX @@ +/* + * STM32L4X5 RCC (Reset and clock control) + * + * Copyright (c) 2023 Arnaud Minier <arnaud.minier@telecom-paris.fr> + * Copyright (c) 2023 Inès Varhol <ines.varhol@telecom-paris.fr> + * + * SPDX-License-Identifier: GPL-2.0-or-later + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + * The reference used is the STMicroElectronics RM0351 Reference manual + * for STM32L4x5 and STM32L4x6 advanced Arm ® -based 32-bit MCUs. + * + * Inspired by the BCM2835 CPRMAN clock manager by Luc Michel. + */ + +#ifndef HW_STM32L4X5_RCC_H +#define HW_STM32L4X5_RCC_H + +#include "hw/sysbus.h" +#include "qom/object.h" + +#define TYPE_STM32L4X5_RCC "stm32l4x5-rcc" +OBJECT_DECLARE_SIMPLE_TYPE(Stm32l4x5RccState, STM32L4X5_RCC) + +/* In the Stm32l4x5 clock tree, mux have at most 7 sources */ +#define RCC_NUM_CLOCK_MUX_SRC 7 +struct Stm32l4x5RccState { + SysBusDevice parent_obj; + + MemoryRegion mmio; + + uint32_t cr; + uint32_t icscr; + uint32_t cfgr; + uint32_t pllcfgr; + uint32_t pllsai1cfgr; + uint32_t pllsai2cfgr; + uint32_t cier; + uint32_t cifr; + uint32_t ahb1rstr; + uint32_t ahb2rstr; + uint32_t ahb3rstr; + uint32_t apb1rstr1; + uint32_t apb1rstr2; + uint32_t apb2rstr; + uint32_t ahb1enr; + uint32_t ahb2enr; + uint32_t ahb3enr; + uint32_t apb1enr1; + uint32_t apb1enr2; + uint32_t apb2enr; + uint32_t ahb1smenr; + uint32_t ahb2smenr; + uint32_t ahb3smenr; + uint32_t apb1smenr1; + uint32_t apb1smenr2; + uint32_t apb2smenr; + uint32_t ccipr; + uint32_t bdcr; + uint32_t csr; + + /* Clock sources */ + Clock *gnd; + Clock *hsi16_rc; + Clock *msi_rc; + Clock *hse; + Clock *lsi_rc; + Clock *lse_crystal; + Clock *sai1_extclk; + Clock *sai2_extclk; + + qemu_irq irq; + uint64_t hse_frequency; + uint64_t sai1_extclk_frequency; + uint64_t sai2_extclk_frequency; +}; + +#endif /* HW_STM32L4X5_RCC_H */ diff --git a/include/hw/misc/stm32l4x5_rcc_internals.h b/include/hw/misc/stm32l4x5_rcc_internals.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/stm32l4x5_rcc_internals.h @@ -XXX,XX +XXX,XX @@ +/* + * STM32L4X5 RCC (Reset and clock control) + * + * Copyright (c) 2023 Arnaud Minier <arnaud.minier@telecom-paris.fr> + * Copyright (c) 2023 Inès Varhol <ines.varhol@telecom-paris.fr> + * + * SPDX-License-Identifier: GPL-2.0-or-later + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + * The reference used is the STMicroElectronics RM0351 Reference manual + * for STM32L4x5 and STM32L4x6 advanced Arm ® -based 32-bit MCUs. + * + * Inspired by the BCM2835 CPRMAN clock manager implementation by Luc Michel. + */ + +#ifndef HW_STM32L4X5_RCC_INTERNALS_H +#define HW_STM32L4X5_RCC_INTERNALS_H + +#include "hw/registerfields.h" +#include "hw/misc/stm32l4x5_rcc.h" + + +/* Register map */ +REG32(CR, 0x00) + FIELD(CR, PLLSAI2RDY, 29, 1) + FIELD(CR, PLLSAI2ON, 28, 1) + FIELD(CR, PLLSAI1RDY, 27, 1) + FIELD(CR, PLLSAI1ON, 26, 1) + FIELD(CR, PLLRDY, 25, 1) + FIELD(CR, PLLON, 24, 1) + FIELD(CR, CSSON, 19, 1) + FIELD(CR, HSEBYP, 18, 1) + FIELD(CR, HSERDY, 17, 1) + FIELD(CR, HSEON, 16, 1) + FIELD(CR, HSIASFS, 11, 1) + FIELD(CR, HSIRDY, 10, 1) + FIELD(CR, HSIKERON, 9, 1) + FIELD(CR, HSION, 8, 1) + FIELD(CR, MSIRANGE, 4, 4) + FIELD(CR, MSIRGSEL, 3, 1) + FIELD(CR, MSIPLLEN, 2, 1) + FIELD(CR, MSIRDY, 1, 1) + FIELD(CR, MSION, 0, 1) +REG32(ICSCR, 0x04) + FIELD(ICSCR, HSITRIM, 24, 7) + FIELD(ICSCR, HSICAL, 16, 8) + FIELD(ICSCR, MSITRIM, 8, 8) + FIELD(ICSCR, MSICAL, 0, 8) +REG32(CFGR, 0x08) + FIELD(CFGR, MCOPRE, 28, 3) + /* MCOSEL[2:0] only for STM32L475xx/476xx/486xx devices */ + FIELD(CFGR, MCOSEL, 24, 3) + FIELD(CFGR, STOPWUCK, 15, 1) + FIELD(CFGR, PPRE2, 11, 3) + FIELD(CFGR, PPRE1, 8, 3) + FIELD(CFGR, HPRE, 4, 4) + FIELD(CFGR, SWS, 2, 2) + FIELD(CFGR, SW, 0, 2) +REG32(PLLCFGR, 0x0C) + FIELD(PLLCFGR, PLLPDIV, 27, 5) + FIELD(PLLCFGR, PLLR, 25, 2) + FIELD(PLLCFGR, PLLREN, 24, 1) + FIELD(PLLCFGR, PLLQ, 21, 2) + FIELD(PLLCFGR, PLLQEN, 20, 1) + FIELD(PLLCFGR, PLLP, 17, 1) + FIELD(PLLCFGR, PLLPEN, 16, 1) + FIELD(PLLCFGR, PLLN, 8, 7) + FIELD(PLLCFGR, PLLM, 4, 3) + FIELD(PLLCFGR, PLLSRC, 0, 2) +REG32(PLLSAI1CFGR, 0x10) + FIELD(PLLSAI1CFGR, PLLSAI1PDIV, 27, 5) + FIELD(PLLSAI1CFGR, PLLSAI1R, 25, 2) + FIELD(PLLSAI1CFGR, PLLSAI1REN, 24, 1) + FIELD(PLLSAI1CFGR, PLLSAI1Q, 21, 2) + FIELD(PLLSAI1CFGR, PLLSAI1QEN, 20, 1) + FIELD(PLLSAI1CFGR, PLLSAI1P, 17, 1) + FIELD(PLLSAI1CFGR, PLLSAI1PEN, 16, 1) + FIELD(PLLSAI1CFGR, PLLSAI1N, 8, 7) +REG32(PLLSAI2CFGR, 0x14) + FIELD(PLLSAI2CFGR, PLLSAI2PDIV, 27, 5) + FIELD(PLLSAI2CFGR, PLLSAI2R, 25, 2) + FIELD(PLLSAI2CFGR, PLLSAI2REN, 24, 1) + FIELD(PLLSAI2CFGR, PLLSAI2Q, 21, 2) + FIELD(PLLSAI2CFGR, PLLSAI2QEN, 20, 1) + FIELD(PLLSAI2CFGR, PLLSAI2P, 17, 1) + FIELD(PLLSAI2CFGR, PLLSAI2PEN, 16, 1) + FIELD(PLLSAI2CFGR, PLLSAI2N, 8, 7) +REG32(CIER, 0x18) + /* HSI48RDYIE: only on STM32L496xx/4A6xx devices */ + FIELD(CIER, LSECSSIE, 9, 1) + FIELD(CIER, PLLSAI2RDYIE, 7, 1) + FIELD(CIER, PLLSAI1RDYIE, 6, 1) + FIELD(CIER, PLLRDYIE, 5, 1) + FIELD(CIER, HSERDYIE, 4, 1) + FIELD(CIER, HSIRDYIE, 3, 1) + FIELD(CIER, MSIRDYIE, 2, 1) + FIELD(CIER, LSERDYIE, 1, 1) + FIELD(CIER, LSIRDYIE, 0, 1) +REG32(CIFR, 0x1C) + /* HSI48RDYF: only on STM32L496xx/4A6xx devices */ + FIELD(CIFR, LSECSSF, 9, 1) + FIELD(CIFR, CSSF, 8, 1) + FIELD(CIFR, PLLSAI2RDYF, 7, 1) + FIELD(CIFR, PLLSAI1RDYF, 6, 1) + FIELD(CIFR, PLLRDYF, 5, 1) + FIELD(CIFR, HSERDYF, 4, 1) + FIELD(CIFR, HSIRDYF, 3, 1) + FIELD(CIFR, MSIRDYF, 2, 1) + FIELD(CIFR, LSERDYF, 1, 1) + FIELD(CIFR, LSIRDYF, 0, 1) +REG32(CICR, 0x20) + /* HSI48RDYC: only on STM32L496xx/4A6xx devices */ + FIELD(CICR, LSECSSC, 9, 1) + FIELD(CICR, CSSC, 8, 1) + FIELD(CICR, PLLSAI2RDYC, 7, 1) + FIELD(CICR, PLLSAI1RDYC, 6, 1) + FIELD(CICR, PLLRDYC, 5, 1) + FIELD(CICR, HSERDYC, 4, 1) + FIELD(CICR, HSIRDYC, 3, 1) + FIELD(CICR, MSIRDYC, 2, 1) + FIELD(CICR, LSERDYC, 1, 1) + FIELD(CICR, LSIRDYC, 0, 1) +REG32(AHB1RSTR, 0x28) +REG32(AHB2RSTR, 0x2C) +REG32(AHB3RSTR, 0x30) +REG32(APB1RSTR1, 0x38) +REG32(APB1RSTR2, 0x3C) +REG32(APB2RSTR, 0x40) +REG32(AHB1ENR, 0x48) + /* DMA2DEN: reserved for STM32L475xx */ + FIELD(AHB1ENR, TSCEN, 16, 1) + FIELD(AHB1ENR, CRCEN, 12, 1) + FIELD(AHB1ENR, FLASHEN, 8, 1) + FIELD(AHB1ENR, DMA2EN, 1, 1) + FIELD(AHB1ENR, DMA1EN, 0, 1) +REG32(AHB2ENR, 0x4C) + FIELD(AHB2ENR, RNGEN, 18, 1) + /* HASHEN: reserved for STM32L475xx */ + FIELD(AHB2ENR, AESEN, 16, 1) + /* DCMIEN: reserved for STM32L475xx */ + FIELD(AHB2ENR, ADCEN, 13, 1) + FIELD(AHB2ENR, OTGFSEN, 12, 1) + /* GPIOIEN: reserved for STM32L475xx */ + FIELD(AHB2ENR, GPIOHEN, 7, 1) + FIELD(AHB2ENR, GPIOGEN, 6, 1) + FIELD(AHB2ENR, GPIOFEN, 5, 1) + FIELD(AHB2ENR, GPIOEEN, 4, 1) + FIELD(AHB2ENR, GPIODEN, 3, 1) + FIELD(AHB2ENR, GPIOCEN, 2, 1) + FIELD(AHB2ENR, GPIOBEN, 1, 1) + FIELD(AHB2ENR, GPIOAEN, 0, 1) +REG32(AHB3ENR, 0x50) + FIELD(AHB3ENR, QSPIEN, 8, 1) + FIELD(AHB3ENR, FMCEN, 0, 1) +REG32(APB1ENR1, 0x58) + FIELD(APB1ENR1, LPTIM1EN, 31, 1) + FIELD(APB1ENR1, OPAMPEN, 30, 1) + FIELD(APB1ENR1, DAC1EN, 29, 1) + FIELD(APB1ENR1, PWREN, 28, 1) + FIELD(APB1ENR1, CAN2EN, 26, 1) + FIELD(APB1ENR1, CAN1EN, 25, 1) + /* CRSEN: reserved for STM32L475xx */ + FIELD(APB1ENR1, I2C3EN, 23, 1) + FIELD(APB1ENR1, I2C2EN, 22, 1) + FIELD(APB1ENR1, I2C1EN, 21, 1) + FIELD(APB1ENR1, UART5EN, 20, 1) + FIELD(APB1ENR1, UART4EN, 19, 1) + FIELD(APB1ENR1, USART3EN, 18, 1) + FIELD(APB1ENR1, USART2EN, 17, 1) + FIELD(APB1ENR1, SPI3EN, 15, 1) + FIELD(APB1ENR1, SPI2EN, 14, 1) + FIELD(APB1ENR1, WWDGEN, 11, 1) + /* RTCAPBEN: reserved for STM32L475xx */ + FIELD(APB1ENR1, LCDEN, 9, 1) + FIELD(APB1ENR1, TIM7EN, 5, 1) + FIELD(APB1ENR1, TIM6EN, 4, 1) + FIELD(APB1ENR1, TIM5EN, 3, 1) + FIELD(APB1ENR1, TIM4EN, 2, 1) + FIELD(APB1ENR1, TIM3EN, 1, 1) + FIELD(APB1ENR1, TIM2EN, 0, 1) +REG32(APB1ENR2, 0x5C) + FIELD(APB1ENR2, LPTIM2EN, 5, 1) + FIELD(APB1ENR2, SWPMI1EN, 2, 1) + /* I2C4EN: reserved for STM32L475xx */ + FIELD(APB1ENR2, LPUART1EN, 0, 1) +REG32(APB2ENR, 0x60) + FIELD(APB2ENR, DFSDM1EN, 24, 1) + FIELD(APB2ENR, SAI2EN, 22, 1) + FIELD(APB2ENR, SAI1EN, 21, 1) + FIELD(APB2ENR, TIM17EN, 18, 1) + FIELD(APB2ENR, TIM16EN, 17, 1) + FIELD(APB2ENR, TIM15EN, 16, 1) + FIELD(APB2ENR, USART1EN, 14, 1) + FIELD(APB2ENR, TIM8EN, 13, 1) + FIELD(APB2ENR, SPI1EN, 12, 1) + FIELD(APB2ENR, TIM1EN, 11, 1) + FIELD(APB2ENR, SDMMC1EN, 10, 1) + FIELD(APB2ENR, FWEN, 7, 1) + FIELD(APB2ENR, SYSCFGEN, 0, 1) +REG32(AHB1SMENR, 0x68) +REG32(AHB2SMENR, 0x6C) +REG32(AHB3SMENR, 0x70) +REG32(APB1SMENR1, 0x78) +REG32(APB1SMENR2, 0x7C) +REG32(APB2SMENR, 0x80) +REG32(CCIPR, 0x88) + FIELD(CCIPR, DFSDM1SEL, 31, 1) + FIELD(CCIPR, SWPMI1SEL, 30, 1) + FIELD(CCIPR, ADCSEL, 28, 2) + FIELD(CCIPR, CLK48SEL, 26, 2) + FIELD(CCIPR, SAI2SEL, 24, 2) + FIELD(CCIPR, SAI1SEL, 22, 2) + FIELD(CCIPR, LPTIM2SEL, 20, 2) + FIELD(CCIPR, LPTIM1SEL, 18, 2) + FIELD(CCIPR, I2C3SEL, 16, 2) + FIELD(CCIPR, I2C2SEL, 14, 2) + FIELD(CCIPR, I2C1SEL, 12, 2) + FIELD(CCIPR, LPUART1SEL, 10, 2) + FIELD(CCIPR, UART5SEL, 8, 2) + FIELD(CCIPR, UART4SEL, 6, 2) + FIELD(CCIPR, USART3SEL, 4, 2) + FIELD(CCIPR, USART2SEL, 2, 2) + FIELD(CCIPR, USART1SEL, 0, 2) +REG32(BDCR, 0x90) + FIELD(BDCR, LSCOSEL, 25, 1) + FIELD(BDCR, LSCOEN, 24, 1) + FIELD(BDCR, BDRST, 16, 1) + FIELD(BDCR, RTCEN, 15, 1) + FIELD(BDCR, RTCSEL, 8, 2) + FIELD(BDCR, LSECSSD, 6, 1) + FIELD(BDCR, LSECSSON, 5, 1) + FIELD(BDCR, LSEDRV, 3, 2) + FIELD(BDCR, LSEBYP, 2, 1) + FIELD(BDCR, LSERDY, 1, 1) + FIELD(BDCR, LSEON, 0, 1) +REG32(CSR, 0x94) + FIELD(CSR, LPWRRSTF, 31, 1) + FIELD(CSR, WWDGRSTF, 30, 1) + FIELD(CSR, IWWGRSTF, 29, 1) + FIELD(CSR, SFTRSTF, 28, 1) + FIELD(CSR, BORRSTF, 27, 1) + FIELD(CSR, PINRSTF, 26, 1) + FIELD(CSR, OBLRSTF, 25, 1) + FIELD(CSR, FWRSTF, 24, 1) + FIELD(CSR, RMVF, 23, 1) + FIELD(CSR, MSISRANGE, 8, 4) + FIELD(CSR, LSIRDY, 1, 1) + FIELD(CSR, LSION, 0, 1) +/* CRRCR and CCIPR2 registers are present on L496/L4A6 devices only. */ + +/* Read Only masks to prevent writes in unauthorized bits */ +#define CR_READ_ONLY_MASK (R_CR_PLLSAI2RDY_MASK | \ + R_CR_PLLSAI1RDY_MASK | \ + R_CR_PLLRDY_MASK | \ + R_CR_HSERDY_MASK | \ + R_CR_HSIRDY_MASK | \ + R_CR_MSIRDY_MASK) +#define CR_READ_SET_MASK (R_CR_CSSON_MASK | R_CR_MSIRGSEL_MASK) +#define ICSCR_READ_ONLY_MASK (R_ICSCR_HSICAL_MASK | R_ICSCR_MSICAL_MASK) +#define CFGR_READ_ONLY_MASK (R_CFGR_SWS_MASK) +#define CIFR_READ_ONLY_MASK (R_CIFR_LSECSSF_MASK | \ + R_CIFR_CSSF_MASK | \ + R_CIFR_PLLSAI2RDYF_MASK | \ + R_CIFR_PLLSAI1RDYF_MASK | \ + R_CIFR_PLLRDYF_MASK | \ + R_CIFR_HSERDYF_MASK | \ + R_CIFR_HSIRDYF_MASK | \ + R_CIFR_MSIRDYF_MASK | \ + R_CIFR_LSERDYF_MASK | \ + R_CIFR_LSIRDYF_MASK) +#define CIFR_IRQ_MASK CIFR_READ_ONLY_MASK +#define APB2ENR_READ_SET_MASK (R_APB2ENR_FWEN_MASK) +#define BDCR_READ_ONLY_MASK (R_BDCR_LSECSSD_MASK | R_BDCR_LSERDY_MASK) +#define CSR_READ_ONLY_MASK (R_CSR_LPWRRSTF_MASK | \ + R_CSR_WWDGRSTF_MASK | \ + R_CSR_IWWGRSTF_MASK | \ + R_CSR_SFTRSTF_MASK | \ + R_CSR_BORRSTF_MASK | \ + R_CSR_PINRSTF_MASK | \ + R_CSR_OBLRSTF_MASK | \ + R_CSR_FWRSTF_MASK | \ + R_CSR_LSIRDY_MASK) + +#endif /* HW_STM32L4X5_RCC_INTERNALS_H */ diff --git a/hw/arm/stm32l4x5_soc.c b/hw/arm/stm32l4x5_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stm32l4x5_soc.c +++ b/hw/arm/stm32l4x5_soc.c @@ -XXX,XX +XXX,XX @@ static const int exti_irq[NUM_EXTI_IRQ] = { -1, -1, -1, -1, /* PVM[1..4] OR gate 1 */ 78 /* LCD wakeup, Direct */ }; +#define RCC_BASE_ADDRESS 0x40021000 +#define RCC_IRQ 5 static const int exti_or_gates_out[NUM_EXTI_OR_GATES] = { 23, 40, 63, 1, @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_soc_initfn(Object *obj) TYPE_OR_IRQ); } object_initialize_child(obj, "syscfg", &s->syscfg, TYPE_STM32L4X5_SYSCFG); + object_initialize_child(obj, "rcc", &s->rcc, TYPE_STM32L4X5_RCC); s->sysclk = qdev_init_clock_in(DEVICE(s), "sysclk", NULL, NULL, 0); s->refclk = qdev_init_clock_in(DEVICE(s), "refclk", NULL, NULL, 0); @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_soc_realize(DeviceState *dev_soc, Error **errp) qdev_get_gpio_in(DEVICE(&s->exti), i)); } + /* RCC device */ + busdev = SYS_BUS_DEVICE(&s->rcc); + if (!sysbus_realize(busdev, errp)) { + return; + } + sysbus_mmio_map(busdev, 0, RCC_BASE_ADDRESS); + sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(armv7m, RCC_IRQ)); + /* APB1 BUS */ create_unimplemented_device("TIM2", 0x40000000, 0x400); create_unimplemented_device("TIM3", 0x40000400, 0x400); @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_soc_realize(DeviceState *dev_soc, Error **errp) create_unimplemented_device("DMA1", 0x40020000, 0x400); create_unimplemented_device("DMA2", 0x40020400, 0x400); /* RESERVED: 0x40020800, 0x800 */ - create_unimplemented_device("RCC", 0x40021000, 0x400); /* RESERVED: 0x40021400, 0xC00 */ create_unimplemented_device("FLASH", 0x40022000, 0x400); /* RESERVED: 0x40022400, 0xC00 */ diff --git a/hw/misc/stm32l4x5_rcc.c b/hw/misc/stm32l4x5_rcc.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/stm32l4x5_rcc.c @@ -XXX,XX +XXX,XX @@ +/* + * STM32L4X5 RCC (Reset and clock control) + * + * Copyright (c) 2023 Arnaud Minier <arnaud.minier@telecom-paris.fr> + * Copyright (c) 2023 Inès Varhol <ines.varhol@telecom-paris.fr> + * + * SPDX-License-Identifier: GPL-2.0-or-later + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + * The reference used is the STMicroElectronics RM0351 Reference manual + * for STM32L4x5 and STM32L4x6 advanced Arm ® -based 32-bit MCUs. + * + * Inspired by the BCM2835 CPRMAN clock manager implementation by Luc Michel. + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "qemu/timer.h" +#include "qapi/error.h" +#include "migration/vmstate.h" +#include "hw/misc/stm32l4x5_rcc.h" +#include "hw/misc/stm32l4x5_rcc_internals.h" +#include "hw/clock.h" +#include "hw/irq.h" +#include "hw/qdev-clock.h" +#include "hw/qdev-properties.h" +#include "hw/qdev-properties-system.h" +#include "trace.h" + +#define HSE_DEFAULT_FRQ 48000000ULL +#define HSI_FRQ 16000000ULL +#define MSI_DEFAULT_FRQ 4000000ULL +#define LSE_FRQ 32768ULL +#define LSI_FRQ 32000ULL + +static void rcc_update_irq(Stm32l4x5RccState *s) +{ + if (s->cifr & CIFR_IRQ_MASK) { + qemu_irq_raise(s->irq); + } else { + qemu_irq_lower(s->irq); + } +} + +static void stm32l4x5_rcc_reset_hold(Object *obj) +{ + Stm32l4x5RccState *s = STM32L4X5_RCC(obj); + s->cr = 0x00000063; + /* + * Factory-programmed calibration data + * From the reference manual: 0x10XX 00XX + * Value taken from a real card. + */ + s->icscr = 0x106E0082; + s->cfgr = 0x0; + s->pllcfgr = 0x00001000; + s->pllsai1cfgr = 0x00001000; + s->pllsai2cfgr = 0x00001000; + s->cier = 0x0; + s->cifr = 0x0; + s->ahb1rstr = 0x0; + s->ahb2rstr = 0x0; + s->ahb3rstr = 0x0; + s->apb1rstr1 = 0x0; + s->apb1rstr2 = 0x0; + s->apb2rstr = 0x0; + s->ahb1enr = 0x00000100; + s->ahb2enr = 0x0; + s->ahb3enr = 0x0; + s->apb1enr1 = 0x0; + s->apb1enr2 = 0x0; + s->apb2enr = 0x0; + s->ahb1smenr = 0x00011303; + s->ahb2smenr = 0x000532FF; + s->ahb3smenr = 0x00000101; + s->apb1smenr1 = 0xF2FECA3F; + s->apb1smenr2 = 0x00000025; + s->apb2smenr = 0x01677C01; + s->ccipr = 0x0; + s->bdcr = 0x0; + s->csr = 0x0C000600; +} + +static uint64_t stm32l4x5_rcc_read(void *opaque, hwaddr addr, + unsigned int size) +{ + Stm32l4x5RccState *s = opaque; + uint64_t retvalue = 0; + + switch (addr) { + case A_CR: + retvalue = s->cr; + break; + case A_ICSCR: + retvalue = s->icscr; + break; + case A_CFGR: + retvalue = s->cfgr; + break; + case A_PLLCFGR: + retvalue = s->pllcfgr; + break; + case A_PLLSAI1CFGR: + retvalue = s->pllsai1cfgr; + break; + case A_PLLSAI2CFGR: + retvalue = s->pllsai2cfgr; + break; + case A_CIER: + retvalue = s->cier; + break; + case A_CIFR: + retvalue = s->cifr; + break; + case A_CICR: + /* CICR is write only, return the reset value = 0 */ + break; + case A_AHB1RSTR: + retvalue = s->ahb1rstr; + break; + case A_AHB2RSTR: + retvalue = s->ahb2rstr; + break; + case A_AHB3RSTR: + retvalue = s->ahb3rstr; + break; + case A_APB1RSTR1: + retvalue = s->apb1rstr1; + break; + case A_APB1RSTR2: + retvalue = s->apb1rstr2; + break; + case A_APB2RSTR: + retvalue = s->apb2rstr; + break; + case A_AHB1ENR: + retvalue = s->ahb1enr; + break; + case A_AHB2ENR: + retvalue = s->ahb2enr; + break; + case A_AHB3ENR: + retvalue = s->ahb3enr; + break; + case A_APB1ENR1: + retvalue = s->apb1enr1; + break; + case A_APB1ENR2: + retvalue = s->apb1enr2; + break; + case A_APB2ENR: + retvalue = s->apb2enr; + break; + case A_AHB1SMENR: + retvalue = s->ahb1smenr; + break; + case A_AHB2SMENR: + retvalue = s->ahb2smenr; + break; + case A_AHB3SMENR: + retvalue = s->ahb3smenr; + break; + case A_APB1SMENR1: + retvalue = s->apb1smenr1; + break; + case A_APB1SMENR2: + retvalue = s->apb1smenr2; + break; + case A_APB2SMENR: + retvalue = s->apb2smenr; + break; + case A_CCIPR: + retvalue = s->ccipr; + break; + case A_BDCR: + retvalue = s->bdcr; + break; + case A_CSR: + retvalue = s->csr; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad offset 0x%"HWADDR_PRIx"\n", __func__, addr); + break; + } + + trace_stm32l4x5_rcc_read(addr, retvalue); + + return retvalue; +} + +static void stm32l4x5_rcc_write(void *opaque, hwaddr addr, + uint64_t val64, unsigned int size) +{ + Stm32l4x5RccState *s = opaque; + const uint32_t value = val64; + + trace_stm32l4x5_rcc_write(addr, value); + + switch (addr) { + case A_CR: + s->cr = (s->cr & CR_READ_SET_MASK) | + (value & (CR_READ_SET_MASK | ~CR_READ_ONLY_MASK)); + break; + case A_ICSCR: + s->icscr = value & ~ICSCR_READ_ONLY_MASK; + break; + case A_CFGR: + s->cfgr = value & ~CFGR_READ_ONLY_MASK; + break; + case A_PLLCFGR: + s->pllcfgr = value; + break; + case A_PLLSAI1CFGR: + s->pllsai1cfgr = value; + break; + case A_PLLSAI2CFGR: + s->pllsai2cfgr = value; + break; + case A_CIER: + s->cier = value; + break; + case A_CIFR: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Write attempt into read-only register (CIFR) 0x%"PRIx32"\n", + __func__, value); + break; + case A_CICR: + /* Clear interrupt flags by writing a 1 to the CICR register */ + s->cifr &= ~value; + rcc_update_irq(s); + break; + /* Reset behaviors are not implemented */ + case A_AHB1RSTR: + s->ahb1rstr = value; + break; + case A_AHB2RSTR: + s->ahb2rstr = value; + break; + case A_AHB3RSTR: + s->ahb3rstr = value; + break; + case A_APB1RSTR1: + s->apb1rstr1 = value; + break; + case A_APB1RSTR2: + s->apb1rstr2 = value; + break; + case A_APB2RSTR: + s->apb2rstr = value; + break; + case A_AHB1ENR: + s->ahb1enr = value; + break; + case A_AHB2ENR: + s->ahb2enr = value; + break; + case A_AHB3ENR: + s->ahb3enr = value; + break; + case A_APB1ENR1: + s->apb1enr1 = value; + break; + case A_APB1ENR2: + s->apb1enr2 = value; + break; + case A_APB2ENR: + s->apb2enr = (s->apb2enr & APB2ENR_READ_SET_MASK) | value; + break; + /* Behaviors for Sleep and Stop modes are not implemented */ + case A_AHB1SMENR: + s->ahb1smenr = value; + break; + case A_AHB2SMENR: + s->ahb2smenr = value; + break; + case A_AHB3SMENR: + s->ahb3smenr = value; + break; + case A_APB1SMENR1: + s->apb1smenr1 = value; + break; + case A_APB1SMENR2: + s->apb1smenr2 = value; + break; + case A_APB2SMENR: + s->apb2smenr = value; + break; + case A_CCIPR: + s->ccipr = value; + break; + case A_BDCR: + s->bdcr = value & ~BDCR_READ_ONLY_MASK; + break; + case A_CSR: + s->csr = value & ~CSR_READ_ONLY_MASK; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad offset 0x%"HWADDR_PRIx"\n", __func__, addr); + } +} + +static const MemoryRegionOps stm32l4x5_rcc_ops = { + .read = stm32l4x5_rcc_read, + .write = stm32l4x5_rcc_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + .max_access_size = 4, + .min_access_size = 4, + .unaligned = false + }, + .impl = { + .max_access_size = 4, + .min_access_size = 4, + .unaligned = false + }, +}; + +static const ClockPortInitArray stm32l4x5_rcc_clocks = { + QDEV_CLOCK_IN(Stm32l4x5RccState, hsi16_rc, NULL, 0), + QDEV_CLOCK_IN(Stm32l4x5RccState, msi_rc, NULL, 0), + QDEV_CLOCK_IN(Stm32l4x5RccState, hse, NULL, 0), + QDEV_CLOCK_IN(Stm32l4x5RccState, lsi_rc, NULL, 0), + QDEV_CLOCK_IN(Stm32l4x5RccState, lse_crystal, NULL, 0), + QDEV_CLOCK_IN(Stm32l4x5RccState, sai1_extclk, NULL, 0), + QDEV_CLOCK_IN(Stm32l4x5RccState, sai2_extclk, NULL, 0), + QDEV_CLOCK_END +}; + + +static void stm32l4x5_rcc_init(Object *obj) +{ + Stm32l4x5RccState *s = STM32L4X5_RCC(obj); + + sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->irq); + + memory_region_init_io(&s->mmio, obj, &stm32l4x5_rcc_ops, s, + TYPE_STM32L4X5_RCC, 0x400); + sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio); + + qdev_init_clocks(DEVICE(s), stm32l4x5_rcc_clocks); + + s->gnd = clock_new(obj, "gnd"); +} + +static const VMStateDescription vmstate_stm32l4x5_rcc = { + .name = TYPE_STM32L4X5_RCC, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32(cr, Stm32l4x5RccState), + VMSTATE_UINT32(icscr, Stm32l4x5RccState), + VMSTATE_UINT32(cfgr, Stm32l4x5RccState), + VMSTATE_UINT32(pllcfgr, Stm32l4x5RccState), + VMSTATE_UINT32(pllsai1cfgr, Stm32l4x5RccState), + VMSTATE_UINT32(pllsai2cfgr, Stm32l4x5RccState), + VMSTATE_UINT32(cier, Stm32l4x5RccState), + VMSTATE_UINT32(cifr, Stm32l4x5RccState), + VMSTATE_UINT32(ahb1rstr, Stm32l4x5RccState), + VMSTATE_UINT32(ahb2rstr, Stm32l4x5RccState), + VMSTATE_UINT32(ahb3rstr, Stm32l4x5RccState), + VMSTATE_UINT32(apb1rstr1, Stm32l4x5RccState), + VMSTATE_UINT32(apb1rstr2, Stm32l4x5RccState), + VMSTATE_UINT32(apb2rstr, Stm32l4x5RccState), + VMSTATE_UINT32(ahb1enr, Stm32l4x5RccState), + VMSTATE_UINT32(ahb2enr, Stm32l4x5RccState), + VMSTATE_UINT32(ahb3enr, Stm32l4x5RccState), + VMSTATE_UINT32(apb1enr1, Stm32l4x5RccState), + VMSTATE_UINT32(apb1enr2, Stm32l4x5RccState), + VMSTATE_UINT32(apb2enr, Stm32l4x5RccState), + VMSTATE_UINT32(ahb1smenr, Stm32l4x5RccState), + VMSTATE_UINT32(ahb2smenr, Stm32l4x5RccState), + VMSTATE_UINT32(ahb3smenr, Stm32l4x5RccState), + VMSTATE_UINT32(apb1smenr1, Stm32l4x5RccState), + VMSTATE_UINT32(apb1smenr2, Stm32l4x5RccState), + VMSTATE_UINT32(apb2smenr, Stm32l4x5RccState), + VMSTATE_UINT32(ccipr, Stm32l4x5RccState), + VMSTATE_UINT32(bdcr, Stm32l4x5RccState), + VMSTATE_UINT32(csr, Stm32l4x5RccState), + VMSTATE_CLOCK(hsi16_rc, Stm32l4x5RccState), + VMSTATE_CLOCK(msi_rc, Stm32l4x5RccState), + VMSTATE_CLOCK(hse, Stm32l4x5RccState), + VMSTATE_CLOCK(lsi_rc, Stm32l4x5RccState), + VMSTATE_CLOCK(lse_crystal, Stm32l4x5RccState), + VMSTATE_CLOCK(sai1_extclk, Stm32l4x5RccState), + VMSTATE_CLOCK(sai2_extclk, Stm32l4x5RccState), + VMSTATE_END_OF_LIST() + } +}; + + +static void stm32l4x5_rcc_realize(DeviceState *dev, Error **errp) +{ + Stm32l4x5RccState *s = STM32L4X5_RCC(dev); + + if (s->hse_frequency < 4000000ULL || + s->hse_frequency > 48000000ULL) { + error_setg(errp, + "HSE frequency is outside of the allowed [4-48]Mhz range: %" PRIx64 "", + s->hse_frequency); + return; + } + + clock_update_hz(s->msi_rc, MSI_DEFAULT_FRQ); + clock_update_hz(s->sai1_extclk, s->sai1_extclk_frequency); + clock_update_hz(s->sai2_extclk, s->sai2_extclk_frequency); + clock_update(s->gnd, 0); +} + +static Property stm32l4x5_rcc_properties[] = { + DEFINE_PROP_UINT64("hse_frequency", Stm32l4x5RccState, + hse_frequency, HSE_DEFAULT_FRQ), + DEFINE_PROP_UINT64("sai1_extclk_frequency", Stm32l4x5RccState, + sai1_extclk_frequency, 0), + DEFINE_PROP_UINT64("sai2_extclk_frequency", Stm32l4x5RccState, + sai2_extclk_frequency, 0), + DEFINE_PROP_END_OF_LIST(), +}; + +static void stm32l4x5_rcc_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + + rc->phases.hold = stm32l4x5_rcc_reset_hold; + device_class_set_props(dc, stm32l4x5_rcc_properties); + dc->realize = stm32l4x5_rcc_realize; + dc->vmsd = &vmstate_stm32l4x5_rcc; +} + +static const TypeInfo stm32l4x5_rcc_types[] = { + { + .name = TYPE_STM32L4X5_RCC, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(Stm32l4x5RccState), + .instance_init = stm32l4x5_rcc_init, + .class_init = stm32l4x5_rcc_class_init, + } +}; + +DEFINE_TYPES(stm32l4x5_rcc_types) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config STM32L4X5_SOC select OR_IRQ select STM32L4X5_SYSCFG select STM32L4X5_EXTI + select STM32L4X5_RCC config XLNX_ZYNQMP_ARM bool diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -XXX,XX +XXX,XX @@ config STM32L4X5_EXTI config STM32L4X5_SYSCFG bool +config STM32L4X5_RCC + bool + config MIPS_ITU bool diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ system_ss.add(when: 'CONFIG_STM32F4XX_SYSCFG', if_true: files('stm32f4xx_syscfg. system_ss.add(when: 'CONFIG_STM32F4XX_EXTI', if_true: files('stm32f4xx_exti.c')) system_ss.add(when: 'CONFIG_STM32L4X5_EXTI', if_true: files('stm32l4x5_exti.c')) system_ss.add(when: 'CONFIG_STM32L4X5_SYSCFG', if_true: files('stm32l4x5_syscfg.c')) +system_ss.add(when: 'CONFIG_STM32L4X5_RCC', if_true: files('stm32l4x5_rcc.c')) system_ss.add(when: 'CONFIG_MPS2_FPGAIO', if_true: files('mps2-fpgaio.c')) system_ss.add(when: 'CONFIG_MPS2_SCC', if_true: files('mps2-scc.c')) diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ stm32l4x5_exti_set_irq(int irq, int level) "Set EXTI: %d to %d" stm32l4x5_exti_read(uint64_t addr, uint64_t data) "reg read: addr: 0x%" PRIx64 " val: 0x%" PRIx64 "" stm32l4x5_exti_write(uint64_t addr, uint64_t data) "reg write: addr: 0x%" PRIx64 " val: 0x%" PRIx64 "" +# stm32l4x5_rcc.c +stm32l4x5_rcc_read(uint64_t addr, uint32_t data) "RCC: Read <0x%" PRIx64 "> -> 0x%" PRIx32 +stm32l4x5_rcc_write(uint64_t addr, uint32_t data) "RCC: Write <0x%" PRIx64 "> <- 0x%" PRIx32 + # tz-mpc.c tz_mpc_reg_read(uint32_t offset, uint64_t data, unsigned size) "TZ MPC regs read: offset 0x%x data 0x%" PRIx64 " size %u" tz_mpc_reg_write(uint32_t offset, uint64_t data, unsigned size) "TZ MPC regs write: offset 0x%x data 0x%" PRIx64 " size %u" -- 2.34.1 From: Arnaud Minier <arnaud.minier@telecom-paris.fr> This object is used to represent every multiplexer in the clock tree as well as every clock output, every presecaler, frequency multiplier, etc. This allows to use a generic approach for every component of the clock tree (except the PLLs). The migration handling is based on hw/misc/zynq_sclr.c. Three phase reset will be handled in a later commit. Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20240303140643.81957-3-arnaud.minier@telecom-paris.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/stm32l4x5_rcc.h | 119 ++++++++++++++++ include/hw/misc/stm32l4x5_rcc_internals.h | 29 ++++ hw/misc/stm32l4x5_rcc.c | 160 ++++++++++++++++++++++ hw/misc/trace-events | 5 + 4 files changed, 313 insertions(+) diff --git a/include/hw/misc/stm32l4x5_rcc.h b/include/hw/misc/stm32l4x5_rcc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/stm32l4x5_rcc.h +++ b/include/hw/misc/stm32l4x5_rcc.h @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(Stm32l4x5RccState, STM32L4X5_RCC) /* In the Stm32l4x5 clock tree, mux have at most 7 sources */ #define RCC_NUM_CLOCK_MUX_SRC 7 +/* NB: Prescaler are assimilated to mux with one source and one output */ +typedef enum RccClockMux { + /* Internal muxes that arent't exposed publicly to other peripherals */ + RCC_CLOCK_MUX_SYSCLK, + RCC_CLOCK_MUX_PLL_INPUT, + RCC_CLOCK_MUX_HCLK, + RCC_CLOCK_MUX_PCLK1, + RCC_CLOCK_MUX_PCLK2, + RCC_CLOCK_MUX_HSE_OVER_32, + RCC_CLOCK_MUX_LCD_AND_RTC_COMMON, + + /* Muxes with a publicly available output */ + RCC_CLOCK_MUX_CORTEX_REFCLK, + RCC_CLOCK_MUX_USART1, + RCC_CLOCK_MUX_USART2, + RCC_CLOCK_MUX_USART3, + RCC_CLOCK_MUX_UART4, + RCC_CLOCK_MUX_UART5, + RCC_CLOCK_MUX_LPUART1, + RCC_CLOCK_MUX_I2C1, + RCC_CLOCK_MUX_I2C2, + RCC_CLOCK_MUX_I2C3, + RCC_CLOCK_MUX_LPTIM1, + RCC_CLOCK_MUX_LPTIM2, + RCC_CLOCK_MUX_SWPMI1, + RCC_CLOCK_MUX_MCO, + RCC_CLOCK_MUX_LSCO, + RCC_CLOCK_MUX_DFSDM1, + RCC_CLOCK_MUX_ADC, + RCC_CLOCK_MUX_CLK48, + RCC_CLOCK_MUX_SAI1, + RCC_CLOCK_MUX_SAI2, + + /* + * Mux that have only one input and one output assigned to as peripheral. + * They could be direct lines but it is simpler + * to use the same logic for all outputs. + */ + /* - AHB1 */ + RCC_CLOCK_MUX_TSC, + RCC_CLOCK_MUX_CRC, + RCC_CLOCK_MUX_FLASH, + RCC_CLOCK_MUX_DMA2, + RCC_CLOCK_MUX_DMA1, + + /* - AHB2 */ + RCC_CLOCK_MUX_RNG, + RCC_CLOCK_MUX_AES, + RCC_CLOCK_MUX_OTGFS, + RCC_CLOCK_MUX_GPIOA, + RCC_CLOCK_MUX_GPIOB, + RCC_CLOCK_MUX_GPIOC, + RCC_CLOCK_MUX_GPIOD, + RCC_CLOCK_MUX_GPIOE, + RCC_CLOCK_MUX_GPIOF, + RCC_CLOCK_MUX_GPIOG, + RCC_CLOCK_MUX_GPIOH, + + /* - AHB3 */ + RCC_CLOCK_MUX_QSPI, + RCC_CLOCK_MUX_FMC, + + /* - APB1 */ + RCC_CLOCK_MUX_OPAMP, + RCC_CLOCK_MUX_DAC1, + RCC_CLOCK_MUX_PWR, + RCC_CLOCK_MUX_CAN1, + RCC_CLOCK_MUX_SPI3, + RCC_CLOCK_MUX_SPI2, + RCC_CLOCK_MUX_WWDG, + RCC_CLOCK_MUX_LCD, + RCC_CLOCK_MUX_TIM7, + RCC_CLOCK_MUX_TIM6, + RCC_CLOCK_MUX_TIM5, + RCC_CLOCK_MUX_TIM4, + RCC_CLOCK_MUX_TIM3, + RCC_CLOCK_MUX_TIM2, + + /* - APB2 */ + RCC_CLOCK_MUX_TIM17, + RCC_CLOCK_MUX_TIM16, + RCC_CLOCK_MUX_TIM15, + RCC_CLOCK_MUX_TIM8, + RCC_CLOCK_MUX_SPI1, + RCC_CLOCK_MUX_TIM1, + RCC_CLOCK_MUX_SDMMC1, + RCC_CLOCK_MUX_FW, + RCC_CLOCK_MUX_SYSCFG, + + /* - BDCR */ + RCC_CLOCK_MUX_RTC, + + /* - OTHER */ + RCC_CLOCK_MUX_CORTEX_FCLK, + + RCC_NUM_CLOCK_MUX +} RccClockMux; + +typedef struct RccClockMuxState { + DeviceState parent_obj; + + RccClockMux id; + Clock *srcs[RCC_NUM_CLOCK_MUX_SRC]; + Clock *out; + bool enabled; + uint32_t src; + uint32_t multiplier; + uint32_t divider; + + /* + * Used by clock srcs update callback to retrieve both the clock and the + * source number. + */ + struct RccClockMuxState *backref[RCC_NUM_CLOCK_MUX_SRC]; +} RccClockMuxState; + struct Stm32l4x5RccState { SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ struct Stm32l4x5RccState { Clock *sai1_extclk; Clock *sai2_extclk; + /* Muxes ~= outputs */ + RccClockMuxState clock_muxes[RCC_NUM_CLOCK_MUX]; + qemu_irq irq; uint64_t hse_frequency; uint64_t sai1_extclk_frequency; diff --git a/include/hw/misc/stm32l4x5_rcc_internals.h b/include/hw/misc/stm32l4x5_rcc_internals.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/stm32l4x5_rcc_internals.h +++ b/include/hw/misc/stm32l4x5_rcc_internals.h @@ -XXX,XX +XXX,XX @@ #include "hw/registerfields.h" #include "hw/misc/stm32l4x5_rcc.h" +#define TYPE_RCC_CLOCK_MUX "stm32l4x5-rcc-clock-mux" +OBJECT_DECLARE_SIMPLE_TYPE(RccClockMuxState, RCC_CLOCK_MUX) /* Register map */ REG32(CR, 0x00) @@ -XXX,XX +XXX,XX @@ REG32(CSR, 0x94) R_CSR_FWRSTF_MASK | \ R_CSR_LSIRDY_MASK) +typedef enum RccClockMuxSource { + RCC_CLOCK_MUX_SRC_GND = 0, + RCC_CLOCK_MUX_SRC_HSI, + RCC_CLOCK_MUX_SRC_HSE, + RCC_CLOCK_MUX_SRC_MSI, + RCC_CLOCK_MUX_SRC_LSI, + RCC_CLOCK_MUX_SRC_LSE, + RCC_CLOCK_MUX_SRC_SAI1_EXTCLK, + RCC_CLOCK_MUX_SRC_SAI2_EXTCLK, + RCC_CLOCK_MUX_SRC_PLL, + RCC_CLOCK_MUX_SRC_PLLSAI1, + RCC_CLOCK_MUX_SRC_PLLSAI2, + RCC_CLOCK_MUX_SRC_PLLSAI3, + RCC_CLOCK_MUX_SRC_PLL48M1, + RCC_CLOCK_MUX_SRC_PLL48M2, + RCC_CLOCK_MUX_SRC_PLLADC1, + RCC_CLOCK_MUX_SRC_PLLADC2, + RCC_CLOCK_MUX_SRC_SYSCLK, + RCC_CLOCK_MUX_SRC_HCLK, + RCC_CLOCK_MUX_SRC_PCLK1, + RCC_CLOCK_MUX_SRC_PCLK2, + RCC_CLOCK_MUX_SRC_HSE_OVER_32, + RCC_CLOCK_MUX_SRC_LCD_AND_RTC_COMMON, + + RCC_CLOCK_MUX_SRC_NUMBER, +} RccClockMuxSource; + #endif /* HW_STM32L4X5_RCC_INTERNALS_H */ diff --git a/hw/misc/stm32l4x5_rcc.c b/hw/misc/stm32l4x5_rcc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/stm32l4x5_rcc.c +++ b/hw/misc/stm32l4x5_rcc.c @@ -XXX,XX +XXX,XX @@ #define LSE_FRQ 32768ULL #define LSI_FRQ 32000ULL +static void clock_mux_update(RccClockMuxState *mux) +{ + uint64_t src_freq; + Clock *current_source = mux->srcs[mux->src]; + uint32_t freq_multiplier = 0; + /* + * To avoid rounding errors, we use the clock period instead of the + * frequency. + * This means that the multiplier of the mux becomes the divider of + * the clock and the divider of the mux becomes the multiplier of the + * clock. + */ + if (mux->enabled && mux->divider) { + freq_multiplier = mux->divider; + } + + clock_set_mul_div(mux->out, freq_multiplier, mux->multiplier); + clock_update(mux->out, clock_get(current_source)); + + src_freq = clock_get_hz(current_source); + /* TODO: can we simply detect if the config changed so that we reduce log spam ? */ + trace_stm32l4x5_rcc_mux_update(mux->id, mux->src, src_freq, + mux->multiplier, mux->divider); +} + +static void clock_mux_src_update(void *opaque, ClockEvent event) +{ + RccClockMuxState **backref = opaque; + RccClockMuxState *s = *backref; + /* + * The backref value is equal to: + * s->backref + (sizeof(RccClockMuxState *) * update_src). + * By subtracting we can get back the index of the updated clock. + */ + const uint32_t update_src = backref - s->backref; + /* Only update if the clock that was updated is the current source */ + if (update_src == s->src) { + clock_mux_update(s); + } +} + +static void clock_mux_init(Object *obj) +{ + RccClockMuxState *s = RCC_CLOCK_MUX(obj); + size_t i; + + for (i = 0; i < RCC_NUM_CLOCK_MUX_SRC; i++) { + char *name = g_strdup_printf("srcs[%zu]", i); + s->backref[i] = s; + s->srcs[i] = qdev_init_clock_in(DEVICE(s), name, + clock_mux_src_update, + &s->backref[i], + ClockUpdate); + g_free(name); + } + + s->out = qdev_init_clock_out(DEVICE(s), "out"); +} + +static void clock_mux_reset_hold(Object *obj) +{ } + +static const VMStateDescription clock_mux_vmstate = { + .name = TYPE_RCC_CLOCK_MUX, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32(id, RccClockMuxState), + VMSTATE_ARRAY_CLOCK(srcs, RccClockMuxState, + RCC_NUM_CLOCK_MUX_SRC), + VMSTATE_BOOL(enabled, RccClockMuxState), + VMSTATE_UINT32(src, RccClockMuxState), + VMSTATE_UINT32(multiplier, RccClockMuxState), + VMSTATE_UINT32(divider, RccClockMuxState), + VMSTATE_END_OF_LIST() + } +}; + +static void clock_mux_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + rc->phases.hold = clock_mux_reset_hold; + dc->vmsd = &clock_mux_vmstate; +} + +static void clock_mux_set_enable(RccClockMuxState *mux, bool enabled) +{ + if (mux->enabled == enabled) { + return; + } + + if (enabled) { + trace_stm32l4x5_rcc_mux_enable(mux->id); + } else { + trace_stm32l4x5_rcc_mux_disable(mux->id); + } + + mux->enabled = enabled; + clock_mux_update(mux); +} + +static void clock_mux_set_factor(RccClockMuxState *mux, + uint32_t multiplier, uint32_t divider) +{ + if (mux->multiplier == multiplier && mux->divider == divider) { + return; + } + trace_stm32l4x5_rcc_mux_set_factor(mux->id, + mux->multiplier, multiplier, mux->divider, divider); + + mux->multiplier = multiplier; + mux->divider = divider; + clock_mux_update(mux); +} + +static void clock_mux_set_source(RccClockMuxState *mux, RccClockMuxSource src) +{ + if (mux->src == src) { + return; + } + + trace_stm32l4x5_rcc_mux_set_src(mux->id, mux->src, src); + mux->src = src; + clock_mux_update(mux); +} + static void rcc_update_irq(Stm32l4x5RccState *s) { if (s->cifr & CIFR_IRQ_MASK) { @@ -XXX,XX +XXX,XX @@ static const ClockPortInitArray stm32l4x5_rcc_clocks = { static void stm32l4x5_rcc_init(Object *obj) { Stm32l4x5RccState *s = STM32L4X5_RCC(obj); + size_t i; sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->irq); @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_rcc_init(Object *obj) qdev_init_clocks(DEVICE(s), stm32l4x5_rcc_clocks); + for (i = 0; i < RCC_NUM_CLOCK_MUX; i++) { + + object_initialize_child(obj, "clock[*]", + &s->clock_muxes[i], + TYPE_RCC_CLOCK_MUX); + + } + s->gnd = clock_new(obj, "gnd"); } @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_stm32l4x5_rcc = { static void stm32l4x5_rcc_realize(DeviceState *dev, Error **errp) { Stm32l4x5RccState *s = STM32L4X5_RCC(dev); + size_t i; if (s->hse_frequency < 4000000ULL || s->hse_frequency > 48000000ULL) { @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_rcc_realize(DeviceState *dev, Error **errp) return; } + for (i = 0; i < RCC_NUM_CLOCK_MUX; i++) { + RccClockMuxState *clock_mux = &s->clock_muxes[i]; + + if (!qdev_realize(DEVICE(clock_mux), NULL, errp)) { + return; + } + } + clock_update_hz(s->msi_rc, MSI_DEFAULT_FRQ); clock_update_hz(s->sai1_extclk, s->sai1_extclk_frequency); clock_update_hz(s->sai2_extclk, s->sai2_extclk_frequency); clock_update(s->gnd, 0); + + /* + * Dummy values to make compilation pass. + * Removed in later commits. + */ + clock_mux_set_source(&s->clock_muxes[0], RCC_CLOCK_MUX_SRC_GND); + clock_mux_set_enable(&s->clock_muxes[0], true); + clock_mux_set_factor(&s->clock_muxes[0], 1, 1); } static Property stm32l4x5_rcc_properties[] = { @@ -XXX,XX +XXX,XX @@ static const TypeInfo stm32l4x5_rcc_types[] = { .instance_size = sizeof(Stm32l4x5RccState), .instance_init = stm32l4x5_rcc_init, .class_init = stm32l4x5_rcc_class_init, + }, { + .name = TYPE_RCC_CLOCK_MUX, + .parent = TYPE_DEVICE, + .instance_size = sizeof(RccClockMuxState), + .instance_init = clock_mux_init, + .class_init = clock_mux_class_init, } }; diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ stm32l4x5_exti_write(uint64_t addr, uint64_t data) "reg write: addr: 0x%" PRIx64 # stm32l4x5_rcc.c stm32l4x5_rcc_read(uint64_t addr, uint32_t data) "RCC: Read <0x%" PRIx64 "> -> 0x%" PRIx32 stm32l4x5_rcc_write(uint64_t addr, uint32_t data) "RCC: Write <0x%" PRIx64 "> <- 0x%" PRIx32 +stm32l4x5_rcc_mux_enable(uint32_t mux_id) "RCC: Mux %d enabled" +stm32l4x5_rcc_mux_disable(uint32_t mux_id) "RCC: Mux %d disabled" +stm32l4x5_rcc_mux_set_factor(uint32_t mux_id, uint32_t old_multiplier, uint32_t new_multiplier, uint32_t old_divider, uint32_t new_divider) "RCC: Mux %d factor changed: multiplier (%u -> %u), divider (%u -> %u)" +stm32l4x5_rcc_mux_set_src(uint32_t mux_id, uint32_t old_src, uint32_t new_src) "RCC: Mux %d source changed: from %u to %u" +stm32l4x5_rcc_mux_update(uint32_t mux_id, uint32_t src, uint64_t src_freq, uint32_t multiplier, uint32_t divider) "RCC: Mux %d src %d update: src_freq %" PRIu64 " multiplier %" PRIu32 " divider %" PRIu32 # tz-mpc.c tz_mpc_reg_read(uint32_t offset, uint64_t data, unsigned size) "TZ MPC regs read: offset 0x%x data 0x%" PRIx64 " size %u" -- 2.34.1 From: Arnaud Minier <arnaud.minier@telecom-paris.fr> This object represents the PLLs and their channels. The PLLs allow for a more fine-grained control of the clocks frequency. The migration handling is based on hw/misc/zynq_sclr.c. Three phase reset will be handled in a later commit. Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Message-id: 20240303140643.81957-4-arnaud.minier@telecom-paris.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/stm32l4x5_rcc.h | 40 +++++ include/hw/misc/stm32l4x5_rcc_internals.h | 22 +++ hw/misc/stm32l4x5_rcc.c | 176 ++++++++++++++++++++++ hw/misc/trace-events | 5 + 4 files changed, 243 insertions(+) diff --git a/include/hw/misc/stm32l4x5_rcc.h b/include/hw/misc/stm32l4x5_rcc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/stm32l4x5_rcc.h +++ b/include/hw/misc/stm32l4x5_rcc.h @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(Stm32l4x5RccState, STM32L4X5_RCC) /* In the Stm32l4x5 clock tree, mux have at most 7 sources */ #define RCC_NUM_CLOCK_MUX_SRC 7 + +typedef enum PllCommonChannels { + RCC_PLL_COMMON_CHANNEL_P = 0, + RCC_PLL_COMMON_CHANNEL_Q = 1, + RCC_PLL_COMMON_CHANNEL_R = 2, + + RCC_NUM_CHANNEL_PLL_OUT = 3 +} PllCommonChannels; + /* NB: Prescaler are assimilated to mux with one source and one output */ typedef enum RccClockMux { /* Internal muxes that arent't exposed publicly to other peripherals */ @@ -XXX,XX +XXX,XX @@ typedef enum RccClockMux { RCC_NUM_CLOCK_MUX } RccClockMux; +typedef enum RccPll { + RCC_PLL_PLL, + RCC_PLL_PLLSAI1, + RCC_PLL_PLLSAI2, + + RCC_NUM_PLL +} RccPll; + typedef struct RccClockMuxState { DeviceState parent_obj; @@ -XXX,XX +XXX,XX @@ typedef struct RccClockMuxState { struct RccClockMuxState *backref[RCC_NUM_CLOCK_MUX_SRC]; } RccClockMuxState; +typedef struct RccPllState { + DeviceState parent_obj; + + RccPll id; + Clock *in; + uint32_t vco_multiplier; + Clock *channels[RCC_NUM_CHANNEL_PLL_OUT]; + /* Global pll enabled flag */ + bool enabled; + /* 'enabled' refers to the runtime configuration */ + bool channel_enabled[RCC_NUM_CHANNEL_PLL_OUT]; + /* + * 'exists' refers to the physical configuration + * It should only be set at pll initialization. + * e.g. pllsai2 doesn't have a Q output. + */ + bool channel_exists[RCC_NUM_CHANNEL_PLL_OUT]; + uint32_t channel_divider[RCC_NUM_CHANNEL_PLL_OUT]; +} RccPllState; + struct Stm32l4x5RccState { SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ struct Stm32l4x5RccState { Clock *sai1_extclk; Clock *sai2_extclk; + /* PLLs */ + RccPllState plls[RCC_NUM_PLL]; + /* Muxes ~= outputs */ RccClockMuxState clock_muxes[RCC_NUM_CLOCK_MUX]; diff --git a/include/hw/misc/stm32l4x5_rcc_internals.h b/include/hw/misc/stm32l4x5_rcc_internals.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/stm32l4x5_rcc_internals.h +++ b/include/hw/misc/stm32l4x5_rcc_internals.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/stm32l4x5_rcc.h" #define TYPE_RCC_CLOCK_MUX "stm32l4x5-rcc-clock-mux" +#define TYPE_RCC_PLL "stm32l4x5-rcc-pll" + OBJECT_DECLARE_SIMPLE_TYPE(RccClockMuxState, RCC_CLOCK_MUX) +OBJECT_DECLARE_SIMPLE_TYPE(RccPllState, RCC_PLL) /* Register map */ REG32(CR, 0x00) @@ -XXX,XX +XXX,XX @@ REG32(CSR, 0x94) R_CSR_FWRSTF_MASK | \ R_CSR_LSIRDY_MASK) +/* Pll Channels */ +enum PllChannels { + RCC_PLL_CHANNEL_PLLSAI3CLK = 0, + RCC_PLL_CHANNEL_PLL48M1CLK = 1, + RCC_PLL_CHANNEL_PLLCLK = 2, +}; + +enum PllSai1Channels { + RCC_PLLSAI1_CHANNEL_PLLSAI1CLK = 0, + RCC_PLLSAI1_CHANNEL_PLL48M2CLK = 1, + RCC_PLLSAI1_CHANNEL_PLLADC1CLK = 2, +}; + +enum PllSai2Channels { + RCC_PLLSAI2_CHANNEL_PLLSAI2CLK = 0, + /* No Q channel */ + RCC_PLLSAI2_CHANNEL_PLLADC2CLK = 2, +}; + typedef enum RccClockMuxSource { RCC_CLOCK_MUX_SRC_GND = 0, RCC_CLOCK_MUX_SRC_HSI, diff --git a/hw/misc/stm32l4x5_rcc.c b/hw/misc/stm32l4x5_rcc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/stm32l4x5_rcc.c +++ b/hw/misc/stm32l4x5_rcc.c @@ -XXX,XX +XXX,XX @@ static void clock_mux_set_source(RccClockMuxState *mux, RccClockMuxSource src) clock_mux_update(mux); } +static void pll_update(RccPllState *pll) +{ + uint64_t vco_freq, old_channel_freq, channel_freq; + int i; + + /* The common PLLM factor is handled by the PLL mux */ + vco_freq = muldiv64(clock_get_hz(pll->in), pll->vco_multiplier, 1); + + for (i = 0; i < RCC_NUM_CHANNEL_PLL_OUT; i++) { + if (!pll->channel_exists[i]) { + continue; + } + + old_channel_freq = clock_get_hz(pll->channels[i]); + if (!pll->enabled || + !pll->channel_enabled[i] || + !pll->channel_divider[i]) { + channel_freq = 0; + } else { + channel_freq = muldiv64(vco_freq, + 1, + pll->channel_divider[i]); + } + + /* No change, early continue to avoid log spam and useless propagation */ + if (old_channel_freq == channel_freq) { + continue; + } + + clock_update_hz(pll->channels[i], channel_freq); + trace_stm32l4x5_rcc_pll_update(pll->id, i, vco_freq, + old_channel_freq, channel_freq); + } +} + +static void pll_src_update(void *opaque, ClockEvent event) +{ + RccPllState *s = opaque; + pll_update(s); +} + +static void pll_init(Object *obj) +{ + RccPllState *s = RCC_PLL(obj); + size_t i; + + s->in = qdev_init_clock_in(DEVICE(s), "in", + pll_src_update, s, ClockUpdate); + + const char *names[] = { + "out-p", "out-q", "out-r", + }; + + for (i = 0; i < RCC_NUM_CHANNEL_PLL_OUT; i++) { + s->channels[i] = qdev_init_clock_out(DEVICE(s), names[i]); + } +} + +static void pll_reset_hold(Object *obj) +{ } + +static const VMStateDescription pll_vmstate = { + .name = TYPE_RCC_PLL, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32(id, RccPllState), + VMSTATE_CLOCK(in, RccPllState), + VMSTATE_ARRAY_CLOCK(channels, RccPllState, + RCC_NUM_CHANNEL_PLL_OUT), + VMSTATE_BOOL(enabled, RccPllState), + VMSTATE_UINT32(vco_multiplier, RccPllState), + VMSTATE_BOOL_ARRAY(channel_enabled, RccPllState, RCC_NUM_CHANNEL_PLL_OUT), + VMSTATE_BOOL_ARRAY(channel_exists, RccPllState, RCC_NUM_CHANNEL_PLL_OUT), + VMSTATE_UINT32_ARRAY(channel_divider, RccPllState, RCC_NUM_CHANNEL_PLL_OUT), + VMSTATE_END_OF_LIST() + } +}; + +static void pll_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + rc->phases.hold = pll_reset_hold; + dc->vmsd = &pll_vmstate; +} + +static void pll_set_vco_multiplier(RccPllState *pll, uint32_t vco_multiplier) +{ + if (pll->vco_multiplier == vco_multiplier) { + return; + } + + if (vco_multiplier < 8 || vco_multiplier > 86) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: VCO multiplier is out of bound (%u) for PLL %u\n", + __func__, vco_multiplier, pll->id); + return; + } + + trace_stm32l4x5_rcc_pll_set_vco_multiplier(pll->id, + pll->vco_multiplier, vco_multiplier); + + pll->vco_multiplier = vco_multiplier; + pll_update(pll); +} + +static void pll_set_enable(RccPllState *pll, bool enabled) +{ + if (pll->enabled == enabled) { + return; + } + + pll->enabled = enabled; + pll_update(pll); +} + +static void pll_set_channel_enable(RccPllState *pll, + PllCommonChannels channel, + bool enabled) +{ + if (pll->channel_enabled[channel] == enabled) { + return; + } + + if (enabled) { + trace_stm32l4x5_rcc_pll_channel_enable(pll->id, channel); + } else { + trace_stm32l4x5_rcc_pll_channel_disable(pll->id, channel); + } + + pll->channel_enabled[channel] = enabled; + pll_update(pll); +} + +static void pll_set_channel_divider(RccPllState *pll, + PllCommonChannels channel, + uint32_t divider) +{ + if (pll->channel_divider[channel] == divider) { + return; + } + + trace_stm32l4x5_rcc_pll_set_channel_divider(pll->id, + channel, pll->channel_divider[channel], divider); + + pll->channel_divider[channel] = divider; + pll_update(pll); +} + static void rcc_update_irq(Stm32l4x5RccState *s) { if (s->cifr & CIFR_IRQ_MASK) { @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_rcc_init(Object *obj) qdev_init_clocks(DEVICE(s), stm32l4x5_rcc_clocks); + for (i = 0; i < RCC_NUM_PLL; i++) { + object_initialize_child(obj, "pll[*]", + &s->plls[i], TYPE_RCC_PLL); + } + for (i = 0; i < RCC_NUM_CLOCK_MUX; i++) { object_initialize_child(obj, "clock[*]", @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_rcc_realize(DeviceState *dev, Error **errp) return; } + for (i = 0; i < RCC_NUM_PLL; i++) { + RccPllState *pll = &s->plls[i]; + + clock_set_source(pll->in, s->clock_muxes[RCC_CLOCK_MUX_PLL_INPUT].out); + + if (!qdev_realize(DEVICE(pll), NULL, errp)) { + return; + } + } + for (i = 0; i < RCC_NUM_CLOCK_MUX; i++) { RccClockMuxState *clock_mux = &s->clock_muxes[i]; @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_rcc_realize(DeviceState *dev, Error **errp) clock_mux_set_source(&s->clock_muxes[0], RCC_CLOCK_MUX_SRC_GND); clock_mux_set_enable(&s->clock_muxes[0], true); clock_mux_set_factor(&s->clock_muxes[0], 1, 1); + pll_set_channel_divider(&s->plls[0], 0, 1); + pll_set_enable(&s->plls[0], true); + pll_set_channel_enable(&s->plls[0], 0, true); + pll_set_vco_multiplier(&s->plls[0], 1); } static Property stm32l4x5_rcc_properties[] = { @@ -XXX,XX +XXX,XX @@ static const TypeInfo stm32l4x5_rcc_types[] = { .instance_size = sizeof(RccClockMuxState), .instance_init = clock_mux_init, .class_init = clock_mux_class_init, + }, { + .name = TYPE_RCC_PLL, + .parent = TYPE_DEVICE, + .instance_size = sizeof(RccPllState), + .instance_init = pll_init, + .class_init = pll_class_init, } }; diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ stm32l4x5_rcc_mux_disable(uint32_t mux_id) "RCC: Mux %d disabled" stm32l4x5_rcc_mux_set_factor(uint32_t mux_id, uint32_t old_multiplier, uint32_t new_multiplier, uint32_t old_divider, uint32_t new_divider) "RCC: Mux %d factor changed: multiplier (%u -> %u), divider (%u -> %u)" stm32l4x5_rcc_mux_set_src(uint32_t mux_id, uint32_t old_src, uint32_t new_src) "RCC: Mux %d source changed: from %u to %u" stm32l4x5_rcc_mux_update(uint32_t mux_id, uint32_t src, uint64_t src_freq, uint32_t multiplier, uint32_t divider) "RCC: Mux %d src %d update: src_freq %" PRIu64 " multiplier %" PRIu32 " divider %" PRIu32 +stm32l4x5_rcc_pll_set_vco_multiplier(uint32_t pll_id, uint32_t old_multiplier, uint32_t new_multiplier) "RCC: PLL %u: vco_multiplier changed (%u -> %u)" +stm32l4x5_rcc_pll_channel_enable(uint32_t pll_id, uint32_t channel_id) "RCC: PLL %u, channel %u enabled" +stm32l4x5_rcc_pll_channel_disable(uint32_t pll_id, uint32_t channel_id) "RCC: PLL %u, channel %u disabled" +stm32l4x5_rcc_pll_set_channel_divider(uint32_t pll_id, uint32_t channel_id, uint32_t old_divider, uint32_t new_divider) "RCC: PLL %u, channel %u: divider changed (%u -> %u)" +stm32l4x5_rcc_pll_update(uint32_t pll_id, uint32_t channel_id, uint64_t vco_freq, uint64_t old_freq, uint64_t new_freq) "RCC: PLL %d channel %d update: vco_freq %" PRIu64 " old_freq %" PRIu64 " new_freq %" PRIu64 # tz-mpc.c tz_mpc_reg_read(uint32_t offset, uint64_t data, unsigned size) "TZ MPC regs read: offset 0x%x data 0x%" PRIx64 " size %u" -- 2.34.1 From: Arnaud Minier <arnaud.minier@telecom-paris.fr> Instantiate the whole clock tree and using the Clock multiplexers and the PLLs defined in the previous commits. This allows to statically define the clock tree and easily follow the clock signal from one end to another. Also handle three-phase reset now that we have defined a known base state for every object. (Reset handling based on hw/misc/zynq_sclr.c) Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Message-id: 20240303140643.81957-5-arnaud.minier@telecom-paris.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/stm32l4x5_rcc_internals.h | 705 ++++++++++++++++++++++ hw/misc/stm32l4x5_rcc.c | 145 ++++- 2 files changed, 833 insertions(+), 17 deletions(-) diff --git a/include/hw/misc/stm32l4x5_rcc_internals.h b/include/hw/misc/stm32l4x5_rcc_internals.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/stm32l4x5_rcc_internals.h +++ b/include/hw/misc/stm32l4x5_rcc_internals.h @@ -XXX,XX +XXX,XX @@ typedef enum RccClockMuxSource { RCC_CLOCK_MUX_SRC_NUMBER, } RccClockMuxSource; +/* PLL init info */ +typedef struct PllInitInfo { + const char *name; + + const char *channel_name[RCC_NUM_CHANNEL_PLL_OUT]; + bool channel_exists[RCC_NUM_CHANNEL_PLL_OUT]; + uint32_t default_channel_divider[RCC_NUM_CHANNEL_PLL_OUT]; + + RccClockMuxSource src_mapping[RCC_NUM_CLOCK_MUX_SRC]; +} PllInitInfo; + +static const PllInitInfo PLL_INIT_INFO[] = { + [RCC_PLL_PLL] = { + .name = "pll", + .channel_name = { + "pllsai3clk", + "pll48m1clk", + "pllclk" + }, + .channel_exists = { + true, true, true + }, + /* From PLLCFGR register documentation */ + .default_channel_divider = { + 7, 2, 2 + } + }, + [RCC_PLL_PLLSAI1] = { + .name = "pllsai1", + .channel_name = { + "pllsai1clk", + "pll48m2clk", + "plladc1clk" + }, + .channel_exists = { + true, true, true + }, + /* From PLLSAI1CFGR register documentation */ + .default_channel_divider = { + 7, 2, 2 + } + }, + [RCC_PLL_PLLSAI2] = { + .name = "pllsai2", + .channel_name = { + "pllsai2clk", + NULL, + "plladc2clk" + }, + .channel_exists = { + true, false, true + }, + /* From PLLSAI2CFGR register documentation */ + .default_channel_divider = { + 7, 0, 2 + } + } +}; + +static inline void set_pll_init_info(RccPllState *pll, + RccPll id) +{ + int i; + + pll->id = id; + pll->vco_multiplier = 1; + for (i = 0; i < RCC_NUM_CHANNEL_PLL_OUT; i++) { + pll->channel_enabled[i] = false; + pll->channel_exists[i] = PLL_INIT_INFO[id].channel_exists[i]; + pll->channel_divider[i] = PLL_INIT_INFO[id].default_channel_divider[i]; + } +} + +/* Clock mux init info */ +typedef struct ClockMuxInitInfo { + const char *name; + + uint32_t multiplier; + uint32_t divider; + bool enabled; + /* If this is true, the clock will not be exposed outside of the device */ + bool hidden; + + RccClockMuxSource src_mapping[RCC_NUM_CLOCK_MUX_SRC]; +} ClockMuxInitInfo; + +#define FILL_DEFAULT_FACTOR \ + .multiplier = 1, \ + .divider = 1 + +#define FILL_DEFAULT_INIT_ENABLED \ + FILL_DEFAULT_FACTOR, \ + .enabled = true + +#define FILL_DEFAULT_INIT_DISABLED \ + FILL_DEFAULT_FACTOR, \ + .enabled = false + + +static const ClockMuxInitInfo CLOCK_MUX_INIT_INFO[] = { + [RCC_CLOCK_MUX_SYSCLK] = { + .name = "sysclk", + /* Same mapping as: CFGR_SW */ + .src_mapping = { + RCC_CLOCK_MUX_SRC_MSI, + RCC_CLOCK_MUX_SRC_HSI, + RCC_CLOCK_MUX_SRC_HSE, + RCC_CLOCK_MUX_SRC_PLL, + }, + .hidden = true, + FILL_DEFAULT_INIT_ENABLED, + }, + [RCC_CLOCK_MUX_PLL_INPUT] = { + .name = "pll-input", + /* Same mapping as: PLLCFGR_PLLSRC */ + .src_mapping = { + RCC_CLOCK_MUX_SRC_MSI, + RCC_CLOCK_MUX_SRC_HSI, + RCC_CLOCK_MUX_SRC_HSE, + }, + .hidden = true, + FILL_DEFAULT_INIT_ENABLED, + }, + [RCC_CLOCK_MUX_HCLK] = { + .name = "hclk", + .src_mapping = { + RCC_CLOCK_MUX_SRC_SYSCLK, + }, + .hidden = true, + FILL_DEFAULT_INIT_ENABLED, + }, + [RCC_CLOCK_MUX_PCLK1] = { + .name = "pclk1", + .src_mapping = { + RCC_CLOCK_MUX_SRC_HCLK, + }, + .hidden = true, + FILL_DEFAULT_INIT_ENABLED, + }, + [RCC_CLOCK_MUX_PCLK2] = { + .name = "pclk2", + .src_mapping = { + RCC_CLOCK_MUX_SRC_HCLK, + }, + .hidden = true, + FILL_DEFAULT_INIT_ENABLED, + }, + [RCC_CLOCK_MUX_HSE_OVER_32] = { + .name = "hse-divided-by-32", + .multiplier = 1, + .divider = 32, + .enabled = true, + .src_mapping = { + RCC_CLOCK_MUX_SRC_HSE, + }, + .hidden = true, + }, + [RCC_CLOCK_MUX_LCD_AND_RTC_COMMON] = { + .name = "lcd-and-rtc-common-mux", + /* Same mapping as: BDCR_RTCSEL */ + .src_mapping = { + RCC_CLOCK_MUX_SRC_GND, + RCC_CLOCK_MUX_SRC_LSE, + RCC_CLOCK_MUX_SRC_LSI, + RCC_CLOCK_MUX_SRC_HSE_OVER_32, + }, + .hidden = true, + FILL_DEFAULT_INIT_ENABLED, + }, + /* From now on, muxes with a publicly available output */ + [RCC_CLOCK_MUX_CORTEX_REFCLK] = { + .name = "cortex-refclk", + .multiplier = 1, + /* REFCLK is always HCLK/8 */ + .divider = 8, + .enabled = true, + .src_mapping = { + RCC_CLOCK_MUX_SRC_HCLK, + } + }, + [RCC_CLOCK_MUX_USART1] = { + .name = "usart1", + /* Same mapping as: CCIPR_USART1SEL */ + .src_mapping = { + RCC_CLOCK_MUX_SRC_PCLK2, + RCC_CLOCK_MUX_SRC_SYSCLK, + RCC_CLOCK_MUX_SRC_HSI, + RCC_CLOCK_MUX_SRC_LSE, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_USART2] = { + .name = "usart2", + /* Same mapping as: CCIPR_USART2SEL */ + .src_mapping = { + RCC_CLOCK_MUX_SRC_PCLK1, + RCC_CLOCK_MUX_SRC_SYSCLK, + RCC_CLOCK_MUX_SRC_HSI, + RCC_CLOCK_MUX_SRC_LSE, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_USART3] = { + .name = "usart3", + /* Same mapping as: CCIPR_USART3SEL */ + .src_mapping = { + RCC_CLOCK_MUX_SRC_PCLK1, + RCC_CLOCK_MUX_SRC_SYSCLK, + RCC_CLOCK_MUX_SRC_HSI, + RCC_CLOCK_MUX_SRC_LSE, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_UART4] = { + .name = "uart4", + /* Same mapping as: CCIPR_UART4SEL */ + .src_mapping = { + RCC_CLOCK_MUX_SRC_PCLK1, + RCC_CLOCK_MUX_SRC_SYSCLK, + RCC_CLOCK_MUX_SRC_HSI, + RCC_CLOCK_MUX_SRC_LSE, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_UART5] = { + .name = "uart5", + /* Same mapping as: CCIPR_UART5SEL */ + .src_mapping = { + RCC_CLOCK_MUX_SRC_PCLK1, + RCC_CLOCK_MUX_SRC_SYSCLK, + RCC_CLOCK_MUX_SRC_HSI, + RCC_CLOCK_MUX_SRC_LSE, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_LPUART1] = { + .name = "lpuart1", + /* Same mapping as: CCIPR_LPUART1SEL */ + .src_mapping = { + RCC_CLOCK_MUX_SRC_PCLK1, + RCC_CLOCK_MUX_SRC_SYSCLK, + RCC_CLOCK_MUX_SRC_HSI, + RCC_CLOCK_MUX_SRC_LSE, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_I2C1] = { + .name = "i2c1", + /* Same mapping as: CCIPR_I2C1SEL */ + .src_mapping = { + RCC_CLOCK_MUX_SRC_PCLK1, + RCC_CLOCK_MUX_SRC_SYSCLK, + RCC_CLOCK_MUX_SRC_HSI, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_I2C2] = { + .name = "i2c2", + /* Same mapping as: CCIPR_I2C2SEL */ + .src_mapping = { + RCC_CLOCK_MUX_SRC_PCLK1, + RCC_CLOCK_MUX_SRC_SYSCLK, + RCC_CLOCK_MUX_SRC_HSI, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_I2C3] = { + .name = "i2c3", + /* Same mapping as: CCIPR_I2C3SEL */ + .src_mapping = { + RCC_CLOCK_MUX_SRC_PCLK1, + RCC_CLOCK_MUX_SRC_SYSCLK, + RCC_CLOCK_MUX_SRC_HSI, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_LPTIM1] = { + .name = "lptim1", + /* Same mapping as: CCIPR_LPTIM1SEL */ + .src_mapping = { + RCC_CLOCK_MUX_SRC_PCLK1, + RCC_CLOCK_MUX_SRC_LSI, + RCC_CLOCK_MUX_SRC_HSI, + RCC_CLOCK_MUX_SRC_LSE, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_LPTIM2] = { + .name = "lptim2", + /* Same mapping as: CCIPR_LPTIM2SEL */ + .src_mapping = { + RCC_CLOCK_MUX_SRC_PCLK1, + RCC_CLOCK_MUX_SRC_LSI, + RCC_CLOCK_MUX_SRC_HSI, + RCC_CLOCK_MUX_SRC_LSE, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_SWPMI1] = { + .name = "swpmi1", + /* Same mapping as: CCIPR_SWPMI1SEL */ + .src_mapping = { + RCC_CLOCK_MUX_SRC_PCLK1, + RCC_CLOCK_MUX_SRC_HSI, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_MCO] = { + .name = "mco", + /* Same mapping as: CFGR_MCOSEL */ + .src_mapping = { + RCC_CLOCK_MUX_SRC_SYSCLK, + RCC_CLOCK_MUX_SRC_MSI, + RCC_CLOCK_MUX_SRC_HSI, + RCC_CLOCK_MUX_SRC_HSE, + RCC_CLOCK_MUX_SRC_PLL, + RCC_CLOCK_MUX_SRC_LSI, + RCC_CLOCK_MUX_SRC_LSE, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_LSCO] = { + .name = "lsco", + /* Same mapping as: BDCR_LSCOSEL */ + .src_mapping = { + RCC_CLOCK_MUX_SRC_LSI, + RCC_CLOCK_MUX_SRC_LSE, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_DFSDM1] = { + .name = "dfsdm1", + /* Same mapping as: CCIPR_DFSDM1SEL */ + .src_mapping = { + RCC_CLOCK_MUX_SRC_PCLK2, + RCC_CLOCK_MUX_SRC_SYSCLK, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_ADC] = { + .name = "adc", + /* Same mapping as: CCIPR_ADCSEL */ + .src_mapping = { + RCC_CLOCK_MUX_SRC_GND, + RCC_CLOCK_MUX_SRC_PLLADC1, + RCC_CLOCK_MUX_SRC_PLLADC2, + RCC_CLOCK_MUX_SRC_SYSCLK, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_CLK48] = { + .name = "clk48", + /* Same mapping as: CCIPR_CLK48SEL */ + .src_mapping = { + RCC_CLOCK_MUX_SRC_GND, + RCC_CLOCK_MUX_SRC_PLL48M2, + RCC_CLOCK_MUX_SRC_PLL48M1, + RCC_CLOCK_MUX_SRC_MSI, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_SAI2] = { + .name = "sai2", + /* Same mapping as: CCIPR_SAI2SEL */ + .src_mapping = { + RCC_CLOCK_MUX_SRC_PLLSAI1, + RCC_CLOCK_MUX_SRC_PLLSAI2, + RCC_CLOCK_MUX_SRC_PLLSAI3, + RCC_CLOCK_MUX_SRC_SAI2_EXTCLK, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_SAI1] = { + .name = "sai1", + /* Same mapping as: CCIPR_SAI1SEL */ + .src_mapping = { + RCC_CLOCK_MUX_SRC_PLLSAI1, + RCC_CLOCK_MUX_SRC_PLLSAI2, + RCC_CLOCK_MUX_SRC_PLLSAI3, + RCC_CLOCK_MUX_SRC_SAI1_EXTCLK, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + /* From now on, these muxes only have one valid source */ + [RCC_CLOCK_MUX_TSC] = { + .name = "tsc", + .src_mapping = { + RCC_CLOCK_MUX_SRC_SYSCLK, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_CRC] = { + .name = "crc", + .src_mapping = { + RCC_CLOCK_MUX_SRC_SYSCLK, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_FLASH] = { + .name = "flash", + .src_mapping = { + RCC_CLOCK_MUX_SRC_SYSCLK, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_DMA2] = { + .name = "dma2", + .src_mapping = { + RCC_CLOCK_MUX_SRC_SYSCLK, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_DMA1] = { + .name = "dma1", + .src_mapping = { + RCC_CLOCK_MUX_SRC_SYSCLK, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_RNG] = { + .name = "rng", + .src_mapping = { + RCC_CLOCK_MUX_SRC_SYSCLK, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_AES] = { + .name = "aes", + .src_mapping = { + RCC_CLOCK_MUX_SRC_SYSCLK, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_OTGFS] = { + .name = "otgfs", + .src_mapping = { + RCC_CLOCK_MUX_SRC_SYSCLK, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_GPIOA] = { + .name = "gpioa", + .src_mapping = { + RCC_CLOCK_MUX_SRC_SYSCLK, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_GPIOB] = { + .name = "gpiob", + .src_mapping = { + RCC_CLOCK_MUX_SRC_SYSCLK, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_GPIOC] = { + .name = "gpioc", + .src_mapping = { + RCC_CLOCK_MUX_SRC_SYSCLK, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_GPIOD] = { + .name = "gpiod", + .src_mapping = { + RCC_CLOCK_MUX_SRC_SYSCLK, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_GPIOE] = { + .name = "gpioe", + .src_mapping = { + RCC_CLOCK_MUX_SRC_SYSCLK, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_GPIOF] = { + .name = "gpiof", + .src_mapping = { + RCC_CLOCK_MUX_SRC_SYSCLK, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_GPIOG] = { + .name = "gpiog", + .src_mapping = { + RCC_CLOCK_MUX_SRC_SYSCLK, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_GPIOH] = { + .name = "gpioh", + .src_mapping = { + RCC_CLOCK_MUX_SRC_SYSCLK, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_QSPI] = { + .name = "qspi", + .src_mapping = { + RCC_CLOCK_MUX_SRC_SYSCLK, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_FMC] = { + .name = "fmc", + .src_mapping = { + RCC_CLOCK_MUX_SRC_SYSCLK, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_OPAMP] = { + .name = "opamp", + .src_mapping = { + RCC_CLOCK_MUX_SRC_PCLK1, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_DAC1] = { + .name = "dac1", + .src_mapping = { + RCC_CLOCK_MUX_SRC_PCLK1, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_PWR] = { + .name = "pwr", + /* + * PWREN is in the APB1ENR1 register, + * but PWR uses SYSCLK according to the clock tree. + */ + .src_mapping = { + RCC_CLOCK_MUX_SRC_SYSCLK, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_CAN1] = { + .name = "can1", + .src_mapping = { + RCC_CLOCK_MUX_SRC_PCLK1, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_SPI3] = { + .name = "spi3", + .src_mapping = { + RCC_CLOCK_MUX_SRC_PCLK1, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_SPI2] = { + .name = "spi2", + .src_mapping = { + RCC_CLOCK_MUX_SRC_PCLK1, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_WWDG] = { + .name = "wwdg", + .src_mapping = { + RCC_CLOCK_MUX_SRC_PCLK1, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_LCD] = { + .name = "lcd", + .src_mapping = { + RCC_CLOCK_MUX_SRC_LCD_AND_RTC_COMMON, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_TIM7] = { + .name = "tim7", + .src_mapping = { + RCC_CLOCK_MUX_SRC_PCLK1, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_TIM6] = { + .name = "tim6", + .src_mapping = { + RCC_CLOCK_MUX_SRC_PCLK1, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_TIM5] = { + .name = "tim5", + .src_mapping = { + RCC_CLOCK_MUX_SRC_PCLK1, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_TIM4] = { + .name = "tim4", + .src_mapping = { + RCC_CLOCK_MUX_SRC_PCLK1, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_TIM3] = { + .name = "tim3", + .src_mapping = { + RCC_CLOCK_MUX_SRC_PCLK1, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_TIM2] = { + .name = "tim2", + .src_mapping = { + RCC_CLOCK_MUX_SRC_PCLK1, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_TIM17] = { + .name = "tim17", + .src_mapping = { + RCC_CLOCK_MUX_SRC_PCLK2, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_TIM16] = { + .name = "tim16", + .src_mapping = { + RCC_CLOCK_MUX_SRC_PCLK2, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_TIM15] = { + .name = "tim15", + .src_mapping = { + RCC_CLOCK_MUX_SRC_PCLK2, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_TIM8] = { + .name = "tim8", + .src_mapping = { + RCC_CLOCK_MUX_SRC_PCLK2, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_SPI1] = { + .name = "spi1", + .src_mapping = { + RCC_CLOCK_MUX_SRC_PCLK2, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_TIM1] = { + .name = "tim1", + .src_mapping = { + RCC_CLOCK_MUX_SRC_PCLK2, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_SDMMC1] = { + .name = "sdmmc1", + .src_mapping = { + RCC_CLOCK_MUX_SRC_PCLK2, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_FW] = { + .name = "fw", + .src_mapping = { + RCC_CLOCK_MUX_SRC_PCLK2, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_SYSCFG] = { + .name = "syscfg", + .src_mapping = { + RCC_CLOCK_MUX_SRC_PCLK2, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_RTC] = { + .name = "rtc", + .src_mapping = { + RCC_CLOCK_MUX_SRC_LCD_AND_RTC_COMMON, + }, + FILL_DEFAULT_INIT_DISABLED, + }, + [RCC_CLOCK_MUX_CORTEX_FCLK] = { + .name = "cortex-fclk", + .src_mapping = { + RCC_CLOCK_MUX_SRC_HCLK, + }, + FILL_DEFAULT_INIT_ENABLED, + }, +}; + +static inline void set_clock_mux_init_info(RccClockMuxState *mux, + RccClockMux id) +{ + mux->id = id; + mux->multiplier = CLOCK_MUX_INIT_INFO[id].multiplier; + mux->divider = CLOCK_MUX_INIT_INFO[id].divider; + mux->enabled = CLOCK_MUX_INIT_INFO[id].enabled; + /* + * Every peripheral has the first source of their source list as + * as their default source. + */ + mux->src = 0; +} + #endif /* HW_STM32L4X5_RCC_INTERNALS_H */ diff --git a/hw/misc/stm32l4x5_rcc.c b/hw/misc/stm32l4x5_rcc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/stm32l4x5_rcc.c +++ b/hw/misc/stm32l4x5_rcc.c @@ -XXX,XX +XXX,XX @@ #define LSE_FRQ 32768ULL #define LSI_FRQ 32000ULL -static void clock_mux_update(RccClockMuxState *mux) +/* + * Function to simply acknowledge and propagate changes in a clock mux + * frequency. + * `bypass_source` allows to bypass the period of the current source and just + * consider it equal to 0. This is useful during the hold phase of reset. + */ +static void clock_mux_update(RccClockMuxState *mux, bool bypass_source) { uint64_t src_freq; Clock *current_source = mux->srcs[mux->src]; @@ -XXX,XX +XXX,XX @@ static void clock_mux_update(RccClockMuxState *mux) * the clock and the divider of the mux becomes the multiplier of the * clock. */ - if (mux->enabled && mux->divider) { + if (!bypass_source && mux->enabled && mux->divider) { freq_multiplier = mux->divider; } @@ -XXX,XX +XXX,XX @@ static void clock_mux_src_update(void *opaque, ClockEvent event) const uint32_t update_src = backref - s->backref; /* Only update if the clock that was updated is the current source */ if (update_src == s->src) { - clock_mux_update(s); + clock_mux_update(s, false); } } @@ -XXX,XX +XXX,XX @@ static void clock_mux_init(Object *obj) s->out = qdev_init_clock_out(DEVICE(s), "out"); } +static void clock_mux_reset_enter(Object *obj, ResetType type) +{ + RccClockMuxState *s = RCC_CLOCK_MUX(obj); + set_clock_mux_init_info(s, s->id); +} + static void clock_mux_reset_hold(Object *obj) -{ } +{ + RccClockMuxState *s = RCC_CLOCK_MUX(obj); + clock_mux_update(s, true); +} + +static void clock_mux_reset_exit(Object *obj) +{ + RccClockMuxState *s = RCC_CLOCK_MUX(obj); + clock_mux_update(s, false); +} static const VMStateDescription clock_mux_vmstate = { .name = TYPE_RCC_CLOCK_MUX, @@ -XXX,XX +XXX,XX @@ static void clock_mux_class_init(ObjectClass *klass, void *data) DeviceClass *dc = DEVICE_CLASS(klass); ResettableClass *rc = RESETTABLE_CLASS(klass); + rc->phases.enter = clock_mux_reset_enter; rc->phases.hold = clock_mux_reset_hold; + rc->phases.exit = clock_mux_reset_exit; dc->vmsd = &clock_mux_vmstate; } @@ -XXX,XX +XXX,XX @@ static void clock_mux_set_enable(RccClockMuxState *mux, bool enabled) } mux->enabled = enabled; - clock_mux_update(mux); + clock_mux_update(mux, false); } static void clock_mux_set_factor(RccClockMuxState *mux, @@ -XXX,XX +XXX,XX @@ static void clock_mux_set_factor(RccClockMuxState *mux, mux->multiplier = multiplier; mux->divider = divider; - clock_mux_update(mux); + clock_mux_update(mux, false); } static void clock_mux_set_source(RccClockMuxState *mux, RccClockMuxSource src) @@ -XXX,XX +XXX,XX @@ static void clock_mux_set_source(RccClockMuxState *mux, RccClockMuxSource src) trace_stm32l4x5_rcc_mux_set_src(mux->id, mux->src, src); mux->src = src; - clock_mux_update(mux); + clock_mux_update(mux, false); } -static void pll_update(RccPllState *pll) +/* + * Acknowledge and propagate changes in a PLL frequency. + * `bypass_source` allows to bypass the period of the current source and just + * consider it equal to 0. This is useful during the hold phase of reset. + */ +static void pll_update(RccPllState *pll, bool bypass_source) { uint64_t vco_freq, old_channel_freq, channel_freq; int i; @@ -XXX,XX +XXX,XX @@ static void pll_update(RccPllState *pll) } old_channel_freq = clock_get_hz(pll->channels[i]); - if (!pll->enabled || + if (bypass_source || + !pll->enabled || !pll->channel_enabled[i] || !pll->channel_divider[i]) { channel_freq = 0; @@ -XXX,XX +XXX,XX @@ static void pll_update(RccPllState *pll) static void pll_src_update(void *opaque, ClockEvent event) { RccPllState *s = opaque; - pll_update(s); + pll_update(s, false); } static void pll_init(Object *obj) @@ -XXX,XX +XXX,XX @@ static void pll_init(Object *obj) } } +static void pll_reset_enter(Object *obj, ResetType type) +{ + RccPllState *s = RCC_PLL(obj); + set_pll_init_info(s, s->id); +} + static void pll_reset_hold(Object *obj) -{ } +{ + RccPllState *s = RCC_PLL(obj); + pll_update(s, true); +} + +static void pll_reset_exit(Object *obj) +{ + RccPllState *s = RCC_PLL(obj); + pll_update(s, false); +} static const VMStateDescription pll_vmstate = { .name = TYPE_RCC_PLL, @@ -XXX,XX +XXX,XX @@ static void pll_class_init(ObjectClass *klass, void *data) DeviceClass *dc = DEVICE_CLASS(klass); ResettableClass *rc = RESETTABLE_CLASS(klass); + rc->phases.enter = pll_reset_enter; rc->phases.hold = pll_reset_hold; + rc->phases.exit = pll_reset_exit; dc->vmsd = &pll_vmstate; } @@ -XXX,XX +XXX,XX @@ static void pll_set_vco_multiplier(RccPllState *pll, uint32_t vco_multiplier) pll->vco_multiplier, vco_multiplier); pll->vco_multiplier = vco_multiplier; - pll_update(pll); + pll_update(pll, false); } static void pll_set_enable(RccPllState *pll, bool enabled) @@ -XXX,XX +XXX,XX @@ static void pll_set_enable(RccPllState *pll, bool enabled) } pll->enabled = enabled; - pll_update(pll); + pll_update(pll, false); } static void pll_set_channel_enable(RccPllState *pll, @@ -XXX,XX +XXX,XX @@ static void pll_set_channel_enable(RccPllState *pll, } pll->channel_enabled[channel] = enabled; - pll_update(pll); + pll_update(pll, false); } static void pll_set_channel_divider(RccPllState *pll, @@ -XXX,XX +XXX,XX @@ static void pll_set_channel_divider(RccPllState *pll, channel, pll->channel_divider[channel], divider); pll->channel_divider[channel] = divider; - pll_update(pll); + pll_update(pll, false); } static void rcc_update_irq(Stm32l4x5RccState *s) @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_rcc_init(Object *obj) qdev_init_clocks(DEVICE(s), stm32l4x5_rcc_clocks); for (i = 0; i < RCC_NUM_PLL; i++) { - object_initialize_child(obj, "pll[*]", + object_initialize_child(obj, PLL_INIT_INFO[i].name, &s->plls[i], TYPE_RCC_PLL); + set_pll_init_info(&s->plls[i], i); } for (i = 0; i < RCC_NUM_CLOCK_MUX; i++) { + char *alias; - object_initialize_child(obj, "clock[*]", + object_initialize_child(obj, CLOCK_MUX_INIT_INFO[i].name, &s->clock_muxes[i], TYPE_RCC_CLOCK_MUX); + set_clock_mux_init_info(&s->clock_muxes[i], i); + if (!CLOCK_MUX_INIT_INFO[i].hidden) { + /* Expose muxes output as RCC outputs */ + alias = g_strdup_printf("%s-out", CLOCK_MUX_INIT_INFO[i].name); + qdev_alias_clock(DEVICE(&s->clock_muxes[i]), "out", DEVICE(obj), alias); + g_free(alias); + } } s->gnd = clock_new(obj, "gnd"); } +static void connect_mux_sources(Stm32l4x5RccState *s, + RccClockMuxState *mux, + const RccClockMuxSource *clk_mapping) +{ + size_t i; + + Clock * const CLK_SRC_MAPPING[] = { + [RCC_CLOCK_MUX_SRC_GND] = s->gnd, + [RCC_CLOCK_MUX_SRC_HSI] = s->hsi16_rc, + [RCC_CLOCK_MUX_SRC_HSE] = s->hse, + [RCC_CLOCK_MUX_SRC_MSI] = s->msi_rc, + [RCC_CLOCK_MUX_SRC_LSI] = s->lsi_rc, + [RCC_CLOCK_MUX_SRC_LSE] = s->lse_crystal, + [RCC_CLOCK_MUX_SRC_SAI1_EXTCLK] = s->sai1_extclk, + [RCC_CLOCK_MUX_SRC_SAI2_EXTCLK] = s->sai2_extclk, + [RCC_CLOCK_MUX_SRC_PLL] = + s->plls[RCC_PLL_PLL].channels[RCC_PLL_CHANNEL_PLLCLK], + [RCC_CLOCK_MUX_SRC_PLLSAI1] = + s->plls[RCC_PLL_PLLSAI1].channels[RCC_PLLSAI1_CHANNEL_PLLSAI1CLK], + [RCC_CLOCK_MUX_SRC_PLLSAI2] = + s->plls[RCC_PLL_PLLSAI2].channels[RCC_PLLSAI2_CHANNEL_PLLSAI2CLK], + [RCC_CLOCK_MUX_SRC_PLLSAI3] = + s->plls[RCC_PLL_PLL].channels[RCC_PLL_CHANNEL_PLLSAI3CLK], + [RCC_CLOCK_MUX_SRC_PLL48M1] = + s->plls[RCC_PLL_PLL].channels[RCC_PLL_CHANNEL_PLL48M1CLK], + [RCC_CLOCK_MUX_SRC_PLL48M2] = + s->plls[RCC_PLL_PLLSAI1].channels[RCC_PLLSAI1_CHANNEL_PLL48M2CLK], + [RCC_CLOCK_MUX_SRC_PLLADC1] = + s->plls[RCC_PLL_PLLSAI1].channels[RCC_PLLSAI1_CHANNEL_PLLADC1CLK], + [RCC_CLOCK_MUX_SRC_PLLADC2] = + s->plls[RCC_PLL_PLLSAI2] .channels[RCC_PLLSAI2_CHANNEL_PLLADC2CLK], + [RCC_CLOCK_MUX_SRC_SYSCLK] = s->clock_muxes[RCC_CLOCK_MUX_SYSCLK].out, + [RCC_CLOCK_MUX_SRC_HCLK] = s->clock_muxes[RCC_CLOCK_MUX_HCLK].out, + [RCC_CLOCK_MUX_SRC_PCLK1] = s->clock_muxes[RCC_CLOCK_MUX_PCLK1].out, + [RCC_CLOCK_MUX_SRC_PCLK2] = s->clock_muxes[RCC_CLOCK_MUX_PCLK2].out, + [RCC_CLOCK_MUX_SRC_HSE_OVER_32] = s->clock_muxes[RCC_CLOCK_MUX_HSE_OVER_32].out, + [RCC_CLOCK_MUX_SRC_LCD_AND_RTC_COMMON] = + s->clock_muxes[RCC_CLOCK_MUX_LCD_AND_RTC_COMMON].out, + }; + + assert(ARRAY_SIZE(CLK_SRC_MAPPING) == RCC_CLOCK_MUX_SRC_NUMBER); + + for (i = 0; i < RCC_NUM_CLOCK_MUX_SRC; i++) { + RccClockMuxSource mapping = clk_mapping[i]; + clock_set_source(mux->srcs[i], CLK_SRC_MAPPING[mapping]); + } +} + + static const VMStateDescription vmstate_stm32l4x5_rcc = { .name = TYPE_STM32L4X5_RCC, .version_id = 1, @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_rcc_realize(DeviceState *dev, Error **errp) for (i = 0; i < RCC_NUM_CLOCK_MUX; i++) { RccClockMuxState *clock_mux = &s->clock_muxes[i]; + connect_mux_sources(s, clock_mux, CLOCK_MUX_INIT_INFO[i].src_mapping); + if (!qdev_realize(DEVICE(clock_mux), NULL, errp)) { return; } } + /* + * Start clocks after everything is connected + * to propagate the frequencies along the tree. + */ clock_update_hz(s->msi_rc, MSI_DEFAULT_FRQ); clock_update_hz(s->sai1_extclk, s->sai1_extclk_frequency); clock_update_hz(s->sai2_extclk, s->sai2_extclk_frequency); @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_rcc_class_init(ObjectClass *klass, void *data) DeviceClass *dc = DEVICE_CLASS(klass); ResettableClass *rc = RESETTABLE_CLASS(klass); + assert(ARRAY_SIZE(CLOCK_MUX_INIT_INFO) == RCC_NUM_CLOCK_MUX); rc->phases.hold = stm32l4x5_rcc_reset_hold; device_class_set_props(dc, stm32l4x5_rcc_properties); -- 2.34.1 From: Arnaud Minier <arnaud.minier@telecom-paris.fr> Update the RCC state and propagate frequency changes when writing to the RCC registers. Currently, ICSCR, CIER, the reset registers and the stop mode registers are not implemented. Some fields have not been implemented due to uncertainty about how to handle them (Like the clock security system or bypassing mecanisms). Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Message-id: 20240303140643.81957-6-arnaud.minier@telecom-paris.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/stm32l4x5_rcc.c | 524 +++++++++++++++++++++++++++++++++++++++- 1 file changed, 512 insertions(+), 12 deletions(-) diff --git a/hw/misc/stm32l4x5_rcc.c b/hw/misc/stm32l4x5_rcc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/stm32l4x5_rcc.c +++ b/hw/misc/stm32l4x5_rcc.c @@ -XXX,XX +XXX,XX @@ #include "hw/qdev-clock.h" #include "hw/qdev-properties.h" #include "hw/qdev-properties-system.h" +#include "hw/registerfields.h" #include "trace.h" #define HSE_DEFAULT_FRQ 48000000ULL @@ -XXX,XX +XXX,XX @@ static void pll_set_channel_divider(RccPllState *pll, static void rcc_update_irq(Stm32l4x5RccState *s) { + /* + * TODO: Handle LSECSSF and CSSF flags when the CSS is implemented. + */ if (s->cifr & CIFR_IRQ_MASK) { qemu_irq_raise(s->irq); } else { @@ -XXX,XX +XXX,XX @@ static void rcc_update_irq(Stm32l4x5RccState *s) } } +static void rcc_update_cr_register(Stm32l4x5RccState *s) +{ + int val; + + /* PLLSAI2ON and update PLLSAI2RDY */ + val = FIELD_EX32(s->cr, CR, PLLSAI2ON); + pll_set_enable(&s->plls[RCC_PLL_PLLSAI2], val); + s->cr = (s->cr & ~R_CR_PLLSAI2RDY_MASK) | + (val << R_CR_PLLSAI2RDY_SHIFT); + if (s->cier & R_CIER_PLLSAI2RDYIE_MASK) { + s->cifr |= R_CIFR_PLLSAI2RDYF_MASK; + } + + /* PLLSAI1ON and update PLLSAI1RDY */ + val = FIELD_EX32(s->cr, CR, PLLSAI1ON); + pll_set_enable(&s->plls[RCC_PLL_PLLSAI1], val); + s->cr = (s->cr & ~R_CR_PLLSAI1RDY_MASK) | + (val << R_CR_PLLSAI1RDY_SHIFT); + if (s->cier & R_CIER_PLLSAI1RDYIE_MASK) { + s->cifr |= R_CIFR_PLLSAI1RDYF_MASK; + } + + /* PLLON and update PLLRDY */ + val = FIELD_EX32(s->cr, CR, PLLON); + pll_set_enable(&s->plls[RCC_PLL_PLL], val); + s->cr = (s->cr & ~R_CR_PLLRDY_MASK) | + (val << R_CR_PLLRDY_SHIFT); + if (s->cier & R_CIER_PLLRDYIE_MASK) { + s->cifr |= R_CIFR_PLLRDYF_MASK; + } + + /* CSSON: TODO */ + /* HSEBYP: TODO */ + + /* HSEON and update HSERDY */ + val = FIELD_EX32(s->cr, CR, HSEON); + s->cr = (s->cr & ~R_CR_HSERDY_MASK) | + (val << R_CR_HSERDY_SHIFT); + if (val) { + clock_update_hz(s->hse, s->hse_frequency); + if (s->cier & R_CIER_HSERDYIE_MASK) { + s->cifr |= R_CIFR_HSERDYF_MASK; + } + } else { + clock_update(s->hse, 0); + } + + /* HSIAFS: TODO*/ + /* HSIKERON: TODO*/ + + /* HSION and update HSIRDY*/ + val = FIELD_EX32(s->cr, CR, HSION); + s->cr = (s->cr & ~R_CR_HSIRDY_MASK) | + (val << R_CR_HSIRDY_SHIFT); + if (val) { + clock_update_hz(s->hsi16_rc, HSI_FRQ); + if (s->cier & R_CIER_HSIRDYIE_MASK) { + s->cifr |= R_CIFR_HSIRDYF_MASK; + } + } else { + clock_update(s->hsi16_rc, 0); + } + + static const uint32_t msirange[] = { + 100000, 200000, 400000, 800000, 1000000, 2000000, + 4000000, 8000000, 16000000, 24000000, 32000000, 48000000 + }; + /* MSIRANGE and MSIRGSEL */ + val = FIELD_EX32(s->cr, CR, MSIRGSEL); + if (val) { + /* MSIRGSEL is set, use the MSIRANGE field */ + val = FIELD_EX32(s->cr, CR, MSIRANGE); + } else { + /* MSIRGSEL is not set, use the MSISRANGE field */ + val = FIELD_EX32(s->csr, CSR, MSISRANGE); + } + + if (val < ARRAY_SIZE(msirange)) { + clock_update_hz(s->msi_rc, msirange[val]); + } else { + clock_update_hz(s->msi_rc, MSI_DEFAULT_FRQ); + /* TODO: there is a write protection if the value is out of bound, + implement that instead of setting the default */ + } + + /* MSIPLLEN */ + + /* MSION and update MSIRDY */ + val = FIELD_EX32(s->cr, CR, MSION); + s->cr = (s->cr & ~R_CR_MSIRDY_MASK) | + (val << R_CR_MSIRDY_SHIFT); + if (s->cier & R_CIER_MSIRDYIE_MASK) { + s->cifr |= R_CIFR_MSIRDYF_MASK; + } + rcc_update_irq(s); +} + +static void rcc_update_cfgr_register(Stm32l4x5RccState *s) +{ + uint32_t val; + /* MCOPRE */ + val = FIELD_EX32(s->cfgr, CFGR, MCOPRE); + assert(val <= 0b100); + clock_mux_set_factor(&s->clock_muxes[RCC_CLOCK_MUX_MCO], + 1, 1 << val); + + /* MCOSEL */ + val = FIELD_EX32(s->cfgr, CFGR, MCOSEL); + assert(val <= 0b111); + if (val == 0) { + clock_mux_set_enable(&s->clock_muxes[RCC_CLOCK_MUX_MCO], false); + } else { + clock_mux_set_enable(&s->clock_muxes[RCC_CLOCK_MUX_MCO], true); + clock_mux_set_source(&s->clock_muxes[RCC_CLOCK_MUX_MCO], + val - 1); + } + + /* STOPWUCK */ + /* TODO */ + + /* PPRE2 */ + val = FIELD_EX32(s->cfgr, CFGR, PPRE2); + if (val < 0b100) { + clock_mux_set_factor(&s->clock_muxes[RCC_CLOCK_MUX_PCLK2], + 1, 1); + } else { + clock_mux_set_factor(&s->clock_muxes[RCC_CLOCK_MUX_PCLK2], + 1, 1 << (val - 0b11)); + } + + /* PPRE1 */ + val = FIELD_EX32(s->cfgr, CFGR, PPRE1); + if (val < 0b100) { + clock_mux_set_factor(&s->clock_muxes[RCC_CLOCK_MUX_PCLK1], + 1, 1); + } else { + clock_mux_set_factor(&s->clock_muxes[RCC_CLOCK_MUX_PCLK1], + 1, 1 << (val - 0b11)); + } + + /* HPRE */ + val = FIELD_EX32(s->cfgr, CFGR, HPRE); + if (val < 0b1000) { + clock_mux_set_factor(&s->clock_muxes[RCC_CLOCK_MUX_HCLK], + 1, 1); + } else { + clock_mux_set_factor(&s->clock_muxes[RCC_CLOCK_MUX_HCLK], + 1, 1 << (val - 0b111)); + } + + /* Update SWS */ + val = FIELD_EX32(s->cfgr, CFGR, SW); + clock_mux_set_source(&s->clock_muxes[RCC_CLOCK_MUX_SYSCLK], + val); + s->cfgr &= ~R_CFGR_SWS_MASK; + s->cfgr |= val << R_CFGR_SWS_SHIFT; +} + +static void rcc_update_ahb1enr(Stm32l4x5RccState *s) +{ + #define AHB1ENR_SET_ENABLE(_peripheral_name) \ + clock_mux_set_enable(&s->clock_muxes[RCC_CLOCK_MUX_##_peripheral_name], \ + FIELD_EX32(s->ahb1enr, AHB1ENR, _peripheral_name##EN)) + + /* DMA2DEN: reserved for STM32L475xx */ + AHB1ENR_SET_ENABLE(TSC); + AHB1ENR_SET_ENABLE(CRC); + AHB1ENR_SET_ENABLE(FLASH); + AHB1ENR_SET_ENABLE(DMA2); + AHB1ENR_SET_ENABLE(DMA1); + + #undef AHB1ENR_SET_ENABLE +} + +static void rcc_update_ahb2enr(Stm32l4x5RccState *s) +{ + #define AHB2ENR_SET_ENABLE(_peripheral_name) \ + clock_mux_set_enable(&s->clock_muxes[RCC_CLOCK_MUX_##_peripheral_name], \ + FIELD_EX32(s->ahb2enr, AHB2ENR, _peripheral_name##EN)) + + AHB2ENR_SET_ENABLE(RNG); + /* HASHEN: reserved for STM32L475xx */ + AHB2ENR_SET_ENABLE(AES); + /* DCMIEN: reserved for STM32L475xx */ + AHB2ENR_SET_ENABLE(ADC); + AHB2ENR_SET_ENABLE(OTGFS); + /* GPIOIEN: reserved for STM32L475xx */ + AHB2ENR_SET_ENABLE(GPIOA); + AHB2ENR_SET_ENABLE(GPIOB); + AHB2ENR_SET_ENABLE(GPIOC); + AHB2ENR_SET_ENABLE(GPIOD); + AHB2ENR_SET_ENABLE(GPIOE); + AHB2ENR_SET_ENABLE(GPIOF); + AHB2ENR_SET_ENABLE(GPIOG); + AHB2ENR_SET_ENABLE(GPIOH); + + #undef AHB2ENR_SET_ENABLE +} + +static void rcc_update_ahb3enr(Stm32l4x5RccState *s) +{ + #define AHB3ENR_SET_ENABLE(_peripheral_name) \ + clock_mux_set_enable(&s->clock_muxes[RCC_CLOCK_MUX_##_peripheral_name], \ + FIELD_EX32(s->ahb3enr, AHB3ENR, _peripheral_name##EN)) + + AHB3ENR_SET_ENABLE(QSPI); + AHB3ENR_SET_ENABLE(FMC); + + #undef AHB3ENR_SET_ENABLE +} + +static void rcc_update_apb1enr(Stm32l4x5RccState *s) +{ + #define APB1ENR1_SET_ENABLE(_peripheral_name) \ + clock_mux_set_enable(&s->clock_muxes[RCC_CLOCK_MUX_##_peripheral_name], \ + FIELD_EX32(s->apb1enr1, APB1ENR1, _peripheral_name##EN)) + #define APB1ENR2_SET_ENABLE(_peripheral_name) \ + clock_mux_set_enable(&s->clock_muxes[RCC_CLOCK_MUX_##_peripheral_name], \ + FIELD_EX32(s->apb1enr2, APB1ENR2, _peripheral_name##EN)) + + /* APB1ENR1 */ + APB1ENR1_SET_ENABLE(LPTIM1); + APB1ENR1_SET_ENABLE(OPAMP); + APB1ENR1_SET_ENABLE(DAC1); + APB1ENR1_SET_ENABLE(PWR); + /* CAN2: reserved for STM32L4x5 */ + APB1ENR1_SET_ENABLE(CAN1); + /* CRSEN: reserved for STM32L4x5 */ + APB1ENR1_SET_ENABLE(I2C3); + APB1ENR1_SET_ENABLE(I2C2); + APB1ENR1_SET_ENABLE(I2C1); + APB1ENR1_SET_ENABLE(UART5); + APB1ENR1_SET_ENABLE(UART4); + APB1ENR1_SET_ENABLE(USART3); + APB1ENR1_SET_ENABLE(USART2); + APB1ENR1_SET_ENABLE(SPI3); + APB1ENR1_SET_ENABLE(SPI2); + APB1ENR1_SET_ENABLE(WWDG); + /* RTCAPB: reserved for STM32L4x5 */ + APB1ENR1_SET_ENABLE(LCD); + APB1ENR1_SET_ENABLE(TIM7); + APB1ENR1_SET_ENABLE(TIM6); + APB1ENR1_SET_ENABLE(TIM5); + APB1ENR1_SET_ENABLE(TIM4); + APB1ENR1_SET_ENABLE(TIM3); + APB1ENR1_SET_ENABLE(TIM2); + + /* APB1ENR2 */ + APB1ENR2_SET_ENABLE(LPTIM2); + APB1ENR2_SET_ENABLE(SWPMI1); + /* I2C4EN: reserved for STM32L4x5 */ + APB1ENR2_SET_ENABLE(LPUART1); + + #undef APB1ENR1_SET_ENABLE + #undef APB1ENR2_SET_ENABLE +} + +static void rcc_update_apb2enr(Stm32l4x5RccState *s) +{ + #define APB2ENR_SET_ENABLE(_peripheral_name) \ + clock_mux_set_enable(&s->clock_muxes[RCC_CLOCK_MUX_##_peripheral_name], \ + FIELD_EX32(s->apb2enr, APB2ENR, _peripheral_name##EN)) + + APB2ENR_SET_ENABLE(DFSDM1); + APB2ENR_SET_ENABLE(SAI2); + APB2ENR_SET_ENABLE(SAI1); + APB2ENR_SET_ENABLE(TIM17); + APB2ENR_SET_ENABLE(TIM16); + APB2ENR_SET_ENABLE(TIM15); + APB2ENR_SET_ENABLE(USART1); + APB2ENR_SET_ENABLE(TIM8); + APB2ENR_SET_ENABLE(SPI1); + APB2ENR_SET_ENABLE(TIM1); + APB2ENR_SET_ENABLE(SDMMC1); + APB2ENR_SET_ENABLE(FW); + APB2ENR_SET_ENABLE(SYSCFG); + + #undef APB2ENR_SET_ENABLE +} + +/* + * The 3 PLLs share the same register layout + * so we can use the same function for all of them + * Note: no frequency bounds checking is done here. + */ +static void rcc_update_pllsaixcfgr(Stm32l4x5RccState *s, RccPll pll_id) +{ + uint32_t reg, val; + switch (pll_id) { + case RCC_PLL_PLL: + reg = s->pllcfgr; + break; + case RCC_PLL_PLLSAI1: + reg = s->pllsai1cfgr; + break; + case RCC_PLL_PLLSAI2: + reg = s->pllsai2cfgr; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Invalid PLL ID: %u\n", __func__, pll_id); + return; + } + + /* PLLPDIV */ + val = FIELD_EX32(reg, PLLCFGR, PLLPDIV); + /* 1 is a reserved value */ + if (val == 0) { + /* Get PLLP value */ + val = FIELD_EX32(reg, PLLCFGR, PLLP); + pll_set_channel_divider(&s->plls[pll_id], RCC_PLL_COMMON_CHANNEL_P, + (val ? 17 : 7)); + } else if (val > 1) { + pll_set_channel_divider(&s->plls[pll_id], RCC_PLL_COMMON_CHANNEL_P, + val); + } + + + /* PLLR */ + val = FIELD_EX32(reg, PLLCFGR, PLLR); + pll_set_channel_divider(&s->plls[pll_id], RCC_PLL_COMMON_CHANNEL_R, + 2 * (val + 1)); + + /* PLLREN */ + val = FIELD_EX32(reg, PLLCFGR, PLLREN); + pll_set_channel_enable(&s->plls[pll_id], RCC_PLL_COMMON_CHANNEL_R, val); + + /* PLLQ */ + val = FIELD_EX32(reg, PLLCFGR, PLLQ); + pll_set_channel_divider(&s->plls[pll_id], RCC_PLL_COMMON_CHANNEL_Q, + 2 * (val + 1)); + + /* PLLQEN */ + val = FIELD_EX32(reg, PLLCFGR, PLLQEN); + pll_set_channel_enable(&s->plls[pll_id], RCC_PLL_COMMON_CHANNEL_Q, val); + + /* PLLPEN */ + val = FIELD_EX32(reg, PLLCFGR, PLLPEN); + pll_set_channel_enable(&s->plls[pll_id], RCC_PLL_COMMON_CHANNEL_P, val); + + /* PLLN */ + val = FIELD_EX32(reg, PLLCFGR, PLLN); + pll_set_vco_multiplier(&s->plls[pll_id], val); +} + +static void rcc_update_pllcfgr(Stm32l4x5RccState *s) +{ + int val; + + /* Use common layout */ + rcc_update_pllsaixcfgr(s, RCC_PLL_PLL); + + /* Fetch specific fields for pllcfgr */ + + /* PLLM */ + val = FIELD_EX32(s->pllcfgr, PLLCFGR, PLLM); + clock_mux_set_factor(&s->clock_muxes[RCC_CLOCK_MUX_PLL_INPUT], 1, (val + 1)); + + /* PLLSRC */ + val = FIELD_EX32(s->pllcfgr, PLLCFGR, PLLSRC); + if (val == 0) { + clock_mux_set_enable(&s->clock_muxes[RCC_CLOCK_MUX_PLL_INPUT], false); + } else { + clock_mux_set_source(&s->clock_muxes[RCC_CLOCK_MUX_PLL_INPUT], val - 1); + clock_mux_set_enable(&s->clock_muxes[RCC_CLOCK_MUX_PLL_INPUT], true); + } +} + +static void rcc_update_ccipr(Stm32l4x5RccState *s) +{ + #define CCIPR_SET_SOURCE(_peripheral_name) \ + clock_mux_set_source(&s->clock_muxes[RCC_CLOCK_MUX_##_peripheral_name], \ + FIELD_EX32(s->ccipr, CCIPR, _peripheral_name##SEL)) + + CCIPR_SET_SOURCE(DFSDM1); + CCIPR_SET_SOURCE(SWPMI1); + CCIPR_SET_SOURCE(ADC); + CCIPR_SET_SOURCE(CLK48); + CCIPR_SET_SOURCE(SAI2); + CCIPR_SET_SOURCE(SAI1); + CCIPR_SET_SOURCE(LPTIM2); + CCIPR_SET_SOURCE(LPTIM1); + CCIPR_SET_SOURCE(I2C3); + CCIPR_SET_SOURCE(I2C2); + CCIPR_SET_SOURCE(I2C1); + CCIPR_SET_SOURCE(LPUART1); + CCIPR_SET_SOURCE(UART5); + CCIPR_SET_SOURCE(UART4); + CCIPR_SET_SOURCE(USART3); + CCIPR_SET_SOURCE(USART2); + CCIPR_SET_SOURCE(USART1); + + #undef CCIPR_SET_SOURCE +} + +static void rcc_update_bdcr(Stm32l4x5RccState *s) +{ + int val; + + /* LSCOSEL */ + val = FIELD_EX32(s->bdcr, BDCR, LSCOSEL); + clock_mux_set_source(&s->clock_muxes[RCC_CLOCK_MUX_LSCO], val); + + val = FIELD_EX32(s->bdcr, BDCR, LSCOEN); + clock_mux_set_enable(&s->clock_muxes[RCC_CLOCK_MUX_LSCO], val); + + /* BDRST */ + /* + * The documentation is not clear if the RTCEN flag disables the RTC and + * the LCD common mux or if it only affects the RTC. + * As the LCDEN flag exists, we assume here that it only affects the RTC. + */ + val = FIELD_EX32(s->bdcr, BDCR, RTCEN); + clock_mux_set_enable(&s->clock_muxes[RCC_CLOCK_MUX_RTC], val); + /* LCD and RTC share the same clock */ + val = FIELD_EX32(s->bdcr, BDCR, RTCSEL); + clock_mux_set_source(&s->clock_muxes[RCC_CLOCK_MUX_LCD_AND_RTC_COMMON], val); + + /* LSECSSON */ + /* LSEDRV[1:0] */ + /* LSEBYP */ + + /* LSEON: Update LSERDY at the same time */ + val = FIELD_EX32(s->bdcr, BDCR, LSEON); + if (val) { + clock_update_hz(s->lse_crystal, LSE_FRQ); + s->bdcr |= R_BDCR_LSERDY_MASK; + if (s->cier & R_CIER_LSERDYIE_MASK) { + s->cifr |= R_CIFR_LSERDYF_MASK; + } + } else { + clock_update(s->lse_crystal, 0); + s->bdcr &= ~R_BDCR_LSERDY_MASK; + } + + rcc_update_irq(s); +} + +static void rcc_update_csr(Stm32l4x5RccState *s) +{ + int val; + + /* Reset flags: Not implemented */ + /* MSISRANGE: Not implemented after reset */ + + /* LSION: Update LSIRDY at the same time */ + val = FIELD_EX32(s->csr, CSR, LSION); + if (val) { + clock_update_hz(s->lsi_rc, LSI_FRQ); + s->csr |= R_CSR_LSIRDY_MASK; + if (s->cier & R_CIER_LSIRDYIE_MASK) { + s->cifr |= R_CIFR_LSIRDYF_MASK; + } + } else { + /* + * TODO: Handle when the LSI is set independently of LSION. + * E.g. when the LSI is set by the RTC. + * See the reference manual for more details. + */ + clock_update(s->lsi_rc, 0); + s->csr &= ~R_CSR_LSIRDY_MASK; + } + + rcc_update_irq(s); +} + static void stm32l4x5_rcc_reset_hold(Object *obj) { Stm32l4x5RccState *s = STM32L4X5_RCC(obj); @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_rcc_write(void *opaque, hwaddr addr, case A_CR: s->cr = (s->cr & CR_READ_SET_MASK) | (value & (CR_READ_SET_MASK | ~CR_READ_ONLY_MASK)); + rcc_update_cr_register(s); break; case A_ICSCR: s->icscr = value & ~ICSCR_READ_ONLY_MASK; + qemu_log_mask(LOG_UNIMP, + "%s: Side-effects not implemented for ICSCR\n", __func__); break; case A_CFGR: s->cfgr = value & ~CFGR_READ_ONLY_MASK; + rcc_update_cfgr_register(s); break; case A_PLLCFGR: s->pllcfgr = value; + rcc_update_pllcfgr(s); break; case A_PLLSAI1CFGR: s->pllsai1cfgr = value; + rcc_update_pllsaixcfgr(s, RCC_PLL_PLLSAI1); break; case A_PLLSAI2CFGR: s->pllsai2cfgr = value; + rcc_update_pllsaixcfgr(s, RCC_PLL_PLLSAI2); break; case A_CIER: s->cier = value; + qemu_log_mask(LOG_UNIMP, + "%s: Side-effects not implemented for CIER\n", __func__); break; case A_CIFR: qemu_log_mask(LOG_GUEST_ERROR, @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_rcc_write(void *opaque, hwaddr addr, /* Reset behaviors are not implemented */ case A_AHB1RSTR: s->ahb1rstr = value; + qemu_log_mask(LOG_UNIMP, + "%s: Side-effects not implemented for AHB1RSTR\n", __func__); break; case A_AHB2RSTR: s->ahb2rstr = value; + qemu_log_mask(LOG_UNIMP, + "%s: Side-effects not implemented for AHB2RSTR\n", __func__); break; case A_AHB3RSTR: s->ahb3rstr = value; + qemu_log_mask(LOG_UNIMP, + "%s: Side-effects not implemented for AHB3RSTR\n", __func__); break; case A_APB1RSTR1: s->apb1rstr1 = value; + qemu_log_mask(LOG_UNIMP, + "%s: Side-effects not implemented for APB1RSTR1\n", __func__); break; case A_APB1RSTR2: s->apb1rstr2 = value; + qemu_log_mask(LOG_UNIMP, + "%s: Side-effects not implemented for APB1RSTR2\n", __func__); break; case A_APB2RSTR: s->apb2rstr = value; + qemu_log_mask(LOG_UNIMP, + "%s: Side-effects not implemented for APB2RSTR\n", __func__); break; case A_AHB1ENR: s->ahb1enr = value; + rcc_update_ahb1enr(s); break; case A_AHB2ENR: s->ahb2enr = value; + rcc_update_ahb2enr(s); break; case A_AHB3ENR: s->ahb3enr = value; + rcc_update_ahb3enr(s); break; case A_APB1ENR1: s->apb1enr1 = value; + rcc_update_apb1enr(s); break; case A_APB1ENR2: s->apb1enr2 = value; + rcc_update_apb1enr(s); break; case A_APB2ENR: s->apb2enr = (s->apb2enr & APB2ENR_READ_SET_MASK) | value; + rcc_update_apb2enr(s); break; /* Behaviors for Sleep and Stop modes are not implemented */ case A_AHB1SMENR: s->ahb1smenr = value; + qemu_log_mask(LOG_UNIMP, + "%s: Side-effects not implemented for AHB1SMENR\n", __func__); break; case A_AHB2SMENR: s->ahb2smenr = value; + qemu_log_mask(LOG_UNIMP, + "%s: Side-effects not implemented for AHB2SMENR\n", __func__); break; case A_AHB3SMENR: s->ahb3smenr = value; + qemu_log_mask(LOG_UNIMP, + "%s: Side-effects not implemented for AHB3SMENR\n", __func__); break; case A_APB1SMENR1: s->apb1smenr1 = value; + qemu_log_mask(LOG_UNIMP, + "%s: Side-effects not implemented for APB1SMENR1\n", __func__); break; case A_APB1SMENR2: s->apb1smenr2 = value; + qemu_log_mask(LOG_UNIMP, + "%s: Side-effects not implemented for APB1SMENR2\n", __func__); break; case A_APB2SMENR: s->apb2smenr = value; + qemu_log_mask(LOG_UNIMP, + "%s: Side-effects not implemented for APB2SMENR\n", __func__); break; case A_CCIPR: s->ccipr = value; + rcc_update_ccipr(s); break; case A_BDCR: s->bdcr = value & ~BDCR_READ_ONLY_MASK; + rcc_update_bdcr(s); break; case A_CSR: s->csr = value & ~CSR_READ_ONLY_MASK; + rcc_update_csr(s); break; default: qemu_log_mask(LOG_GUEST_ERROR, @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_rcc_realize(DeviceState *dev, Error **errp) clock_update_hz(s->sai1_extclk, s->sai1_extclk_frequency); clock_update_hz(s->sai2_extclk, s->sai2_extclk_frequency); clock_update(s->gnd, 0); - - /* - * Dummy values to make compilation pass. - * Removed in later commits. - */ - clock_mux_set_source(&s->clock_muxes[0], RCC_CLOCK_MUX_SRC_GND); - clock_mux_set_enable(&s->clock_muxes[0], true); - clock_mux_set_factor(&s->clock_muxes[0], 1, 1); - pll_set_channel_divider(&s->plls[0], 0, 1); - pll_set_enable(&s->plls[0], true); - pll_set_channel_enable(&s->plls[0], 0, true); - pll_set_vco_multiplier(&s->plls[0], 1); } static Property stm32l4x5_rcc_properties[] = { -- 2.34.1 From: Arnaud Minier <arnaud.minier@telecom-paris.fr> Add write protections for the fields in the CR register. PLL configuration write protections (among others) have not been handled yet. This is planned in a future patch set. Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Message-id: 20240303140643.81957-7-arnaud.minier@telecom-paris.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/stm32l4x5_rcc.c | 166 ++++++++++++++++++++++++++++------------ 1 file changed, 115 insertions(+), 51 deletions(-) diff --git a/hw/misc/stm32l4x5_rcc.c b/hw/misc/stm32l4x5_rcc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/stm32l4x5_rcc.c +++ b/hw/misc/stm32l4x5_rcc.c @@ -XXX,XX +XXX,XX @@ static void rcc_update_irq(Stm32l4x5RccState *s) } } -static void rcc_update_cr_register(Stm32l4x5RccState *s) +static void rcc_update_msi(Stm32l4x5RccState *s, uint32_t previous_value) +{ + uint32_t val; + + static const uint32_t msirange[] = { + 100000, 200000, 400000, 800000, 1000000, 2000000, + 4000000, 8000000, 16000000, 24000000, 32000000, 48000000 + }; + /* MSIRANGE and MSIRGSEL */ + val = extract32(s->cr, R_CR_MSIRGSEL_SHIFT, R_CR_MSIRGSEL_LENGTH); + if (val) { + /* MSIRGSEL is set, use the MSIRANGE field */ + val = extract32(s->cr, R_CR_MSIRANGE_SHIFT, R_CR_MSIRANGE_LENGTH); + } else { + /* MSIRGSEL is not set, use the MSISRANGE field */ + val = extract32(s->csr, R_CSR_MSISRANGE_SHIFT, R_CSR_MSISRANGE_LENGTH); + } + + if (val < ARRAY_SIZE(msirange)) { + clock_update_hz(s->msi_rc, msirange[val]); + } else { + /* + * There is a hardware write protection if the value is out of bound. + * Restore the previous value. + */ + s->cr = (s->cr & ~R_CSR_MSISRANGE_MASK) | + (previous_value & R_CSR_MSISRANGE_MASK); + } +} + +/* + * TODO: Add write-protection for all registers: + * DONE: CR + */ + +static void rcc_update_cr_register(Stm32l4x5RccState *s, uint32_t previous_value) { int val; + const RccClockMuxSource current_pll_src = + CLOCK_MUX_INIT_INFO[RCC_CLOCK_MUX_PLL_INPUT].src_mapping[ + s->clock_muxes[RCC_CLOCK_MUX_PLL_INPUT].src]; /* PLLSAI2ON and update PLLSAI2RDY */ val = FIELD_EX32(s->cr, CR, PLLSAI2ON); @@ -XXX,XX +XXX,XX @@ static void rcc_update_cr_register(Stm32l4x5RccState *s) s->cifr |= R_CIFR_PLLSAI1RDYF_MASK; } - /* PLLON and update PLLRDY */ + /* + * PLLON and update PLLRDY + * PLLON cannot be reset if the PLL clock is used as the system clock. + */ val = FIELD_EX32(s->cr, CR, PLLON); - pll_set_enable(&s->plls[RCC_PLL_PLL], val); - s->cr = (s->cr & ~R_CR_PLLRDY_MASK) | - (val << R_CR_PLLRDY_SHIFT); - if (s->cier & R_CIER_PLLRDYIE_MASK) { - s->cifr |= R_CIFR_PLLRDYF_MASK; + if (FIELD_EX32(s->cfgr, CFGR, SWS) != 0b11) { + pll_set_enable(&s->plls[RCC_PLL_PLL], val); + s->cr = (s->cr & ~R_CR_PLLRDY_MASK) | + (val << R_CR_PLLRDY_SHIFT); + if (s->cier & R_CIER_PLLRDYIE_MASK) { + s->cifr |= R_CIFR_PLLRDYF_MASK; + } + } else { + s->cr |= R_CR_PLLON_MASK; } /* CSSON: TODO */ /* HSEBYP: TODO */ - /* HSEON and update HSERDY */ + /* + * HSEON and update HSERDY. + * HSEON cannot be reset if the HSE oscillator is used directly or + * indirectly as the system clock. + */ val = FIELD_EX32(s->cr, CR, HSEON); - s->cr = (s->cr & ~R_CR_HSERDY_MASK) | - (val << R_CR_HSERDY_SHIFT); - if (val) { - clock_update_hz(s->hse, s->hse_frequency); - if (s->cier & R_CIER_HSERDYIE_MASK) { - s->cifr |= R_CIFR_HSERDYF_MASK; + if (FIELD_EX32(s->cfgr, CFGR, SWS) != 0b10 && + current_pll_src != RCC_CLOCK_MUX_SRC_HSE) { + s->cr = (s->cr & ~R_CR_HSERDY_MASK) | + (val << R_CR_HSERDY_SHIFT); + if (val) { + clock_update_hz(s->hse, s->hse_frequency); + if (s->cier & R_CIER_HSERDYIE_MASK) { + s->cifr |= R_CIFR_HSERDYF_MASK; + } + } else { + clock_update(s->hse, 0); } } else { - clock_update(s->hse, 0); + s->cr |= R_CR_HSEON_MASK; } /* HSIAFS: TODO*/ /* HSIKERON: TODO*/ - /* HSION and update HSIRDY*/ - val = FIELD_EX32(s->cr, CR, HSION); - s->cr = (s->cr & ~R_CR_HSIRDY_MASK) | - (val << R_CR_HSIRDY_SHIFT); - if (val) { + /* + * HSION and update HSIRDY + * HSION is set by hardware if the HSI16 is used directly + * or indirectly as system clock. + */ + if (FIELD_EX32(s->cfgr, CFGR, SWS) == 0b01 || + current_pll_src == RCC_CLOCK_MUX_SRC_HSI) { + s->cr |= (R_CR_HSION_MASK | R_CR_HSIRDY_MASK); clock_update_hz(s->hsi16_rc, HSI_FRQ); if (s->cier & R_CIER_HSIRDYIE_MASK) { s->cifr |= R_CIFR_HSIRDYF_MASK; } } else { - clock_update(s->hsi16_rc, 0); + val = FIELD_EX32(s->cr, CR, HSION); + if (val) { + clock_update_hz(s->hsi16_rc, HSI_FRQ); + s->cr |= R_CR_HSIRDY_MASK; + if (s->cier & R_CIER_HSIRDYIE_MASK) { + s->cifr |= R_CIFR_HSIRDYF_MASK; + } + } else { + clock_update(s->hsi16_rc, 0); + s->cr &= ~R_CR_HSIRDY_MASK; + } } - static const uint32_t msirange[] = { - 100000, 200000, 400000, 800000, 1000000, 2000000, - 4000000, 8000000, 16000000, 24000000, 32000000, 48000000 - }; - /* MSIRANGE and MSIRGSEL */ - val = FIELD_EX32(s->cr, CR, MSIRGSEL); - if (val) { - /* MSIRGSEL is set, use the MSIRANGE field */ - val = FIELD_EX32(s->cr, CR, MSIRANGE); + /* MSIPLLEN: TODO */ + + /* + * MSION and update MSIRDY + * Set by hardware when used directly or indirectly as system clock. + */ + if (FIELD_EX32(s->cfgr, CFGR, SWS) == 0b00 || + current_pll_src == RCC_CLOCK_MUX_SRC_MSI) { + s->cr |= (R_CR_MSION_MASK | R_CR_MSIRDY_MASK); + if (!(previous_value & R_CR_MSION_MASK) && (s->cier & R_CIER_MSIRDYIE_MASK)) { + s->cifr |= R_CIFR_MSIRDYF_MASK; + } + rcc_update_msi(s, previous_value); } else { - /* MSIRGSEL is not set, use the MSISRANGE field */ - val = FIELD_EX32(s->csr, CSR, MSISRANGE); - } - - if (val < ARRAY_SIZE(msirange)) { - clock_update_hz(s->msi_rc, msirange[val]); - } else { - clock_update_hz(s->msi_rc, MSI_DEFAULT_FRQ); - /* TODO: there is a write protection if the value is out of bound, - implement that instead of setting the default */ - } - - /* MSIPLLEN */ - - /* MSION and update MSIRDY */ - val = FIELD_EX32(s->cr, CR, MSION); - s->cr = (s->cr & ~R_CR_MSIRDY_MASK) | - (val << R_CR_MSIRDY_SHIFT); - if (s->cier & R_CIER_MSIRDYIE_MASK) { - s->cifr |= R_CIFR_MSIRDYF_MASK; + val = FIELD_EX32(s->cr, CR, MSION); + if (val) { + s->cr |= R_CR_MSIRDY_MASK; + rcc_update_msi(s, previous_value); + if (s->cier & R_CIER_MSIRDYIE_MASK) { + s->cifr |= R_CIFR_MSIRDYF_MASK; + } + } else { + s->cr &= ~R_CR_MSIRDY_MASK; + clock_update(s->msi_rc, 0); + } } rcc_update_irq(s); } @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_rcc_write(void *opaque, hwaddr addr, uint64_t val64, unsigned int size) { Stm32l4x5RccState *s = opaque; + uint32_t previous_value = 0; const uint32_t value = val64; trace_stm32l4x5_rcc_write(addr, value); switch (addr) { case A_CR: + previous_value = s->cr; s->cr = (s->cr & CR_READ_SET_MASK) | (value & (CR_READ_SET_MASK | ~CR_READ_ONLY_MASK)); - rcc_update_cr_register(s); + rcc_update_cr_register(s, previous_value); break; case A_ICSCR: s->icscr = value & ~ICSCR_READ_ONLY_MASK; -- 2.34.1 From: Arnaud Minier <arnaud.minier@telecom-paris.fr> Now that we can generate reliable clock frequencies from the RCC, remove the hacky definition of the sysclk in the b_l475e_iot01a initialisation code and use the correct RCC clock. Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240303140643.81957-8-arnaud.minier@telecom-paris.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/stm32l4x5_soc.h | 3 --- hw/arm/b-l475e-iot01a.c | 10 +--------- hw/arm/stm32l4x5_soc.c | 33 ++++----------------------------- 3 files changed, 5 insertions(+), 41 deletions(-) diff --git a/include/hw/arm/stm32l4x5_soc.h b/include/hw/arm/stm32l4x5_soc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/stm32l4x5_soc.h +++ b/include/hw/arm/stm32l4x5_soc.h @@ -XXX,XX +XXX,XX @@ struct Stm32l4x5SocState { MemoryRegion sram2; MemoryRegion flash; MemoryRegion flash_alias; - - Clock *sysclk; - Clock *refclk; }; struct Stm32l4x5SocClass { diff --git a/hw/arm/b-l475e-iot01a.c b/hw/arm/b-l475e-iot01a.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/b-l475e-iot01a.c +++ b/hw/arm/b-l475e-iot01a.c @@ -XXX,XX +XXX,XX @@ #include "qapi/error.h" #include "hw/boards.h" #include "hw/qdev-properties.h" -#include "hw/qdev-clock.h" #include "qemu/error-report.h" #include "hw/arm/stm32l4x5_soc.h" #include "hw/arm/boot.h" -/* Main SYSCLK frequency in Hz (80MHz) */ -#define MAIN_SYSCLK_FREQ_HZ 80000000ULL +/* B-L475E-IOT01A implementation is derived from netduinoplus2 */ static void b_l475e_iot01a_init(MachineState *machine) { const Stm32l4x5SocClass *sc; DeviceState *dev; - Clock *sysclk; - - /* This clock doesn't need migration because it is fixed-frequency */ - sysclk = clock_new(OBJECT(machine), "SYSCLK"); - clock_set_hz(sysclk, MAIN_SYSCLK_FREQ_HZ); dev = qdev_new(TYPE_STM32L4X5XG_SOC); object_property_add_child(OBJECT(machine), "soc", OBJECT(dev)); - qdev_connect_clock_in(dev, "sysclk", sysclk); sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); sc = STM32L4X5_SOC_GET_CLASS(dev); diff --git a/hw/arm/stm32l4x5_soc.c b/hw/arm/stm32l4x5_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stm32l4x5_soc.c +++ b/hw/arm/stm32l4x5_soc.c @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_soc_initfn(Object *obj) } object_initialize_child(obj, "syscfg", &s->syscfg, TYPE_STM32L4X5_SYSCFG); object_initialize_child(obj, "rcc", &s->rcc, TYPE_STM32L4X5_RCC); - - s->sysclk = qdev_init_clock_in(DEVICE(s), "sysclk", NULL, NULL, 0); - s->refclk = qdev_init_clock_in(DEVICE(s), "refclk", NULL, NULL, 0); } static void stm32l4x5_soc_realize(DeviceState *dev_soc, Error **errp) @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_soc_realize(DeviceState *dev_soc, Error **errp) DeviceState *armv7m; SysBusDevice *busdev; - /* - * We use s->refclk internally and only define it with qdev_init_clock_in() - * so it is correctly parented and not leaked on an init/deinit; it is not - * intended as an externally exposed clock. - */ - if (clock_has_source(s->refclk)) { - error_setg(errp, "refclk clock must not be wired up by the board code"); - return; - } - - if (!clock_has_source(s->sysclk)) { - error_setg(errp, "sysclk clock must be wired up by the board code"); - return; - } - - /* - * TODO: ideally we should model the SoC RCC and its ability to - * change the sysclk frequency and define different sysclk sources. - */ - - /* The refclk always runs at frequency HCLK / 8 */ - clock_set_mul_div(s->refclk, 8, 1); - clock_set_source(s->refclk, s->sysclk); - if (!memory_region_init_rom(&s->flash, OBJECT(dev_soc), "flash", sc->flash_size, errp)) { return; @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_soc_realize(DeviceState *dev_soc, Error **errp) qdev_prop_set_uint32(armv7m, "num-prio-bits", 4); qdev_prop_set_string(armv7m, "cpu-type", ARM_CPU_TYPE_NAME("cortex-m4")); qdev_prop_set_bit(armv7m, "enable-bitband", true); - qdev_connect_clock_in(armv7m, "cpuclk", s->sysclk); - qdev_connect_clock_in(armv7m, "refclk", s->refclk); + qdev_connect_clock_in(armv7m, "cpuclk", + qdev_get_clock_out(DEVICE(&(s->rcc)), "cortex-fclk-out")); + qdev_connect_clock_in(armv7m, "refclk", + qdev_get_clock_out(DEVICE(&(s->rcc)), "cortex-refclk-out")); object_property_set_link(OBJECT(&s->armv7m), "memory", OBJECT(system_memory), &error_abort); if (!sysbus_realize(SYS_BUS_DEVICE(&s->armv7m), errp)) { -- 2.34.1 From: Arnaud Minier <arnaud.minier@telecom-paris.fr> Tests: - the ability to change the sysclk of the device - the ability to enable/disable/configure the PLLs - if the clock multiplexers work - the register flags and the generation of irqs Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Acked-by: Thomas Huth <thuth@redhat.com> Message-id: 20240303140643.81957-9-arnaud.minier@telecom-paris.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/stm32l4x5_rcc-test.c | 189 +++++++++++++++++++++++++++++++ tests/qtest/meson.build | 3 +- 2 files changed, 191 insertions(+), 1 deletion(-) create mode 100644 tests/qtest/stm32l4x5_rcc-test.c diff --git a/tests/qtest/stm32l4x5_rcc-test.c b/tests/qtest/stm32l4x5_rcc-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/stm32l4x5_rcc-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for STM32L4x5_RCC + * + * Copyright (c) 2023 Arnaud Minier <arnaud.minier@telecom-paris.fr> + * Copyright (c) 2023 Inès Varhol <ines.varhol@telecom-paris.fr> + * + * SPDX-License-Identifier: GPL-2.0-or-later + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#include "qemu/osdep.h" +#include "hw/registerfields.h" +#include "libqtest-single.h" +#include "hw/misc/stm32l4x5_rcc_internals.h" + +#define RCC_BASE_ADDR 0x40021000 +#define NVIC_ISER 0xE000E100 +#define NVIC_ISPR 0xE000E200 +#define NVIC_ICPR 0xE000E280 +#define RCC_IRQ 5 + +static void enable_nvic_irq(unsigned int n) +{ + writel(NVIC_ISER, 1 << n); +} + +static void unpend_nvic_irq(unsigned int n) +{ + writel(NVIC_ICPR, 1 << n); +} + +static bool check_nvic_pending(unsigned int n) +{ + return readl(NVIC_ISPR) & (1 << n); +} + +static void rcc_writel(unsigned int offset, uint32_t value) +{ + writel(RCC_BASE_ADDR + offset, value); +} + +static uint32_t rcc_readl(unsigned int offset) +{ + return readl(RCC_BASE_ADDR + offset); +} + +static void test_init_msi(void) +{ + /* MSIRANGE can be set only when MSI is OFF or READY */ + rcc_writel(A_CR, R_CR_MSION_MASK); + /* Wait until MSI is stable */ + g_assert_true((rcc_readl(A_CR) & R_CR_MSIRDY_MASK) == R_CR_MSIRDY_MASK); + /* TODO find a way to test MSI value */ +} + +static void test_set_msi_as_sysclk(void) +{ + /* Clocking from MSI, in case MSI was not the default source */ + rcc_writel(A_CFGR, 0); + /* Wait until MSI is selected and stable */ + g_assert_true((rcc_readl(A_CFGR) & R_CFGR_SWS_MASK) == 0); +} + +static void test_init_pll(void) +{ + uint32_t value; + + /* + * Update PLL and set MSI as the source clock. + * PLLM = 1 --> 000 + * PLLN = 40 --> 40 + * PPLLR = 2 --> 00 + * PLLDIV = unused, PLLP = unused (SAI3), PLLQ = unused (48M1) + * SRC = MSI --> 01 + */ + rcc_writel(A_PLLCFGR, R_PLLCFGR_PLLREN_MASK | + (40 << R_PLLCFGR_PLLN_SHIFT) | + (0b01 << R_PLLCFGR_PLLSRC_SHIFT)); + + /* PLL activation */ + value = rcc_readl(A_CR); + rcc_writel(A_CR, value | R_CR_PLLON_MASK); + + /* Waiting for PLL lock. */ + g_assert_true((rcc_readl(A_CR) & R_CR_PLLRDY_MASK) == R_CR_PLLRDY_MASK); + + /* Switches on the PLL clock source */ + value = rcc_readl(A_CFGR); + rcc_writel(A_CFGR, (value & ~R_CFGR_SW_MASK) | + (0b11 << R_CFGR_SW_SHIFT)); + + /* Wait until SYSCLK is stable. */ + g_assert_true((rcc_readl(A_CFGR) & R_CFGR_SWS_MASK) == + (0b11 << R_CFGR_SWS_SHIFT)); +} + +static void test_activate_lse(void) +{ + /* LSE activation, no LSE Bypass */ + rcc_writel(A_BDCR, R_BDCR_LSEDRV_MASK | R_BDCR_LSEON_MASK); + g_assert_true((rcc_readl(A_BDCR) & R_BDCR_LSERDY_MASK) == R_BDCR_LSERDY_MASK); +} + +static void test_irq(void) +{ + enable_nvic_irq(RCC_IRQ); + + rcc_writel(A_CIER, R_CIER_LSIRDYIE_MASK); + rcc_writel(A_CSR, R_CSR_LSION_MASK); + g_assert_true(check_nvic_pending(RCC_IRQ)); + rcc_writel(A_CICR, R_CICR_LSIRDYC_MASK); + unpend_nvic_irq(RCC_IRQ); + + rcc_writel(A_CIER, R_CIER_LSERDYIE_MASK); + rcc_writel(A_BDCR, R_BDCR_LSEON_MASK); + g_assert_true(check_nvic_pending(RCC_IRQ)); + rcc_writel(A_CICR, R_CICR_LSERDYC_MASK); + unpend_nvic_irq(RCC_IRQ); + + /* + * MSI has been enabled by previous tests, + * shouln't generate an interruption. + */ + rcc_writel(A_CIER, R_CIER_MSIRDYIE_MASK); + rcc_writel(A_CR, R_CR_MSION_MASK); + g_assert_false(check_nvic_pending(RCC_IRQ)); + + rcc_writel(A_CIER, R_CIER_HSIRDYIE_MASK); + rcc_writel(A_CR, R_CR_HSION_MASK); + g_assert_true(check_nvic_pending(RCC_IRQ)); + rcc_writel(A_CICR, R_CICR_HSIRDYC_MASK); + unpend_nvic_irq(RCC_IRQ); + + rcc_writel(A_CIER, R_CIER_HSERDYIE_MASK); + rcc_writel(A_CR, R_CR_HSEON_MASK); + g_assert_true(check_nvic_pending(RCC_IRQ)); + rcc_writel(A_CICR, R_CICR_HSERDYC_MASK); + unpend_nvic_irq(RCC_IRQ); + + /* + * PLL has been enabled by previous tests, + * shouln't generate an interruption. + */ + rcc_writel(A_CIER, R_CIER_PLLRDYIE_MASK); + rcc_writel(A_CR, R_CR_PLLON_MASK); + g_assert_false(check_nvic_pending(RCC_IRQ)); + + rcc_writel(A_CIER, R_CIER_PLLSAI1RDYIE_MASK); + rcc_writel(A_CR, R_CR_PLLSAI1ON_MASK); + g_assert_true(check_nvic_pending(RCC_IRQ)); + rcc_writel(A_CICR, R_CICR_PLLSAI1RDYC_MASK); + unpend_nvic_irq(RCC_IRQ); + + rcc_writel(A_CIER, R_CIER_PLLSAI2RDYIE_MASK); + rcc_writel(A_CR, R_CR_PLLSAI2ON_MASK); + g_assert_true(check_nvic_pending(RCC_IRQ)); + rcc_writel(A_CICR, R_CICR_PLLSAI2RDYC_MASK); + unpend_nvic_irq(RCC_IRQ); +} + +int main(int argc, char **argv) +{ + int ret; + + g_test_init(&argc, &argv, NULL); + g_test_set_nonfatal_assertions(); + /* + * These test separately that we can enable the plls, change the sysclk, + * and enable different devices. + * They are dependent on one another. + * We assume that all operations that would take some time to have an effect + * (e.g. changing the PLL frequency) are done instantaneously. + */ + qtest_add_func("stm32l4x5/rcc/init_msi", test_init_msi); + qtest_add_func("stm32l4x5/rcc/set_msi_as_sysclk", + test_set_msi_as_sysclk); + qtest_add_func("stm32l4x5/rcc/activate_lse", test_activate_lse); + qtest_add_func("stm32l4x5/rcc/init_pll", test_init_pll); + + qtest_add_func("stm32l4x5/rcc/irq", test_irq); + + qtest_start("-machine b-l475e-iot01a"); + ret = g_test_run(); + qtest_end(); + + return ret; +} diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_aspeed = \ qtests_stm32l4x5 = \ ['stm32l4x5_exti-test', - 'stm32l4x5_syscfg-test'] + 'stm32l4x5_syscfg-test', + 'stm32l4x5_rcc-test'] qtests_arm = \ (config_all_devices.has_key('CONFIG_MPS2') ? ['sse-timer-test'] : []) + \ -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Now that we have removed TARGET_PAGE_BITS_MIN-6 from TLB_FLAGS_MASK, we can test for 32-byte alignment. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240301204110.656742-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/translate.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/target/arm/tcg/translate.c b/target/arm/tcg/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate.c +++ b/target/arm/tcg/translate.c @@ -XXX,XX +XXX,XX @@ static inline void store_reg_from_load(DisasContext *s, int reg, TCGv_i32 var) MemOp pow2_align(unsigned i) { static const MemOp mop_align[] = { - 0, MO_ALIGN_2, MO_ALIGN_4, MO_ALIGN_8, MO_ALIGN_16, - /* - * FIXME: TARGET_PAGE_BITS_MIN affects TLB_FLAGS_MASK such - * that 256-bit alignment (MO_ALIGN_32) cannot be supported: - * see get_alignment_bits(). Enforce only 128-bit alignment for now. - */ - MO_ALIGN_16 + 0, MO_ALIGN_2, MO_ALIGN_4, MO_ALIGN_8, MO_ALIGN_16, MO_ALIGN_32 }; g_assert(i < ARRAY_SIZE(mop_align)); return mop_align[i]; -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> These fields are no longer used since 937f224559. Target specific extensions to the page tables should be done with TARGET_PAGE_ENTRY_EXTRA. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240301204110.656742-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/exec/memattrs.h | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/include/exec/memattrs.h b/include/exec/memattrs.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/memattrs.h +++ b/include/exec/memattrs.h @@ -XXX,XX +XXX,XX @@ typedef struct MemTxAttrs { unsigned int requester_id:16; /* Invert endianness for this page */ unsigned int byte_swap:1; - /* - * The following are target-specific page-table bits. These are not - * related to actual memory transactions at all. However, this structure - * is part of the tlb_fill interface, cached in the cputlb structure, - * and has unused bits. These fields will be read by target-specific - * helpers using env->iotlb[mmu_idx][tlb_index()].attrs.target_tlb_bitN. - */ - unsigned int target_tlb_bit0 : 1; - unsigned int target_tlb_bit1 : 1; - unsigned int target_tlb_bit2 : 1; } MemTxAttrs; /* Bus masters which don't specify any attributes will get this, -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Allow the target to set tlb flags to apply to all of the comparators. Remove MemTxAttrs.byte_swap, as the bit is not relevant to memory transactions, only the page mapping. Adjust target/sparc to set TLB_BSWAP directly. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240301204110.656742-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/exec/memattrs.h | 2 -- include/hw/core/cpu.h | 3 +++ accel/tcg/cputlb.c | 5 +---- target/sparc/mmu_helper.c | 2 +- 4 files changed, 5 insertions(+), 7 deletions(-) diff --git a/include/exec/memattrs.h b/include/exec/memattrs.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/memattrs.h +++ b/include/exec/memattrs.h @@ -XXX,XX +XXX,XX @@ typedef struct MemTxAttrs { unsigned int memory:1; /* Requester ID (for MSI for example) */ unsigned int requester_id:16; - /* Invert endianness for this page */ - unsigned int byte_swap:1; } MemTxAttrs; /* Bus masters which don't specify any attributes will get this, diff --git a/include/hw/core/cpu.h b/include/hw/core/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/core/cpu.h +++ b/include/hw/core/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUTLBEntryFull { /* @lg_page_size contains the log2 of the page size. */ uint8_t lg_page_size; + /* Additional tlb flags requested by tlb_fill. */ + uint8_t tlb_fill_flags; + /* * Additional tlb flags for use by the slow path. If non-zero, * the corresponding CPUTLBEntry comparator must have TLB_FORCE_SLOW. diff --git a/accel/tcg/cputlb.c b/accel/tcg/cputlb.c index XXXXXXX..XXXXXXX 100644 --- a/accel/tcg/cputlb.c +++ b/accel/tcg/cputlb.c @@ -XXX,XX +XXX,XX @@ void tlb_set_page_full(CPUState *cpu, int mmu_idx, " prot=%x idx=%d\n", addr, full->phys_addr, prot, mmu_idx); - read_flags = 0; + read_flags = full->tlb_fill_flags; if (full->lg_page_size < TARGET_PAGE_BITS) { /* Repeat the MMU check and TLB fill on every access. */ read_flags |= TLB_INVALID_MASK; } - if (full->attrs.byte_swap) { - read_flags |= TLB_BSWAP; - } is_ram = memory_region_is_ram(section->mr); is_romd = memory_region_is_romd(section->mr); diff --git a/target/sparc/mmu_helper.c b/target/sparc/mmu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/sparc/mmu_helper.c +++ b/target/sparc/mmu_helper.c @@ -XXX,XX +XXX,XX @@ static int get_physical_address_data(CPUSPARCState *env, CPUTLBEntryFull *full, int do_fault = 0; if (TTE_IS_IE(env->dtlb[i].tte)) { - full->attrs.byte_swap = true; + full->tlb_fill_flags |= TLB_BSWAP; } /* access ok? */ -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> This creates a per-page method for checking of alignment. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240301204110.656742-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/exec/cpu-all.h | 4 +++- accel/tcg/cputlb.c | 30 +++++++++++++++++++++++++++--- 2 files changed, 30 insertions(+), 4 deletions(-) diff --git a/include/exec/cpu-all.h b/include/exec/cpu-all.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/cpu-all.h +++ b/include/exec/cpu-all.h @@ -XXX,XX +XXX,XX @@ static inline int cpu_mmu_index(CPUState *cs, bool ifetch) #define TLB_BSWAP (1 << 0) /* Set if TLB entry contains a watchpoint. */ #define TLB_WATCHPOINT (1 << 1) +/* Set if TLB entry requires aligned accesses. */ +#define TLB_CHECK_ALIGNED (1 << 2) -#define TLB_SLOW_FLAGS_MASK (TLB_BSWAP | TLB_WATCHPOINT) +#define TLB_SLOW_FLAGS_MASK (TLB_BSWAP | TLB_WATCHPOINT | TLB_CHECK_ALIGNED) /* The two sets of flags must not overlap. */ QEMU_BUILD_BUG_ON(TLB_FLAGS_MASK & TLB_SLOW_FLAGS_MASK); diff --git a/accel/tcg/cputlb.c b/accel/tcg/cputlb.c index XXXXXXX..XXXXXXX 100644 --- a/accel/tcg/cputlb.c +++ b/accel/tcg/cputlb.c @@ -XXX,XX +XXX,XX @@ static int probe_access_internal(CPUState *cpu, vaddr addr, flags |= full->slow_flags[access_type]; /* Fold all "mmio-like" bits into TLB_MMIO. This is not RAM. */ - if (unlikely(flags & ~(TLB_WATCHPOINT | TLB_NOTDIRTY)) - || - (access_type != MMU_INST_FETCH && force_mmio)) { + if (unlikely(flags & ~(TLB_WATCHPOINT | TLB_NOTDIRTY | TLB_CHECK_ALIGNED)) + || (access_type != MMU_INST_FETCH && force_mmio)) { *phost = NULL; return TLB_MMIO; } @@ -XXX,XX +XXX,XX @@ static bool mmu_lookup(CPUState *cpu, vaddr addr, MemOpIdx oi, tcg_debug_assert((flags & TLB_BSWAP) == 0); } + /* + * This alignment check differs from the one above, in that this is + * based on the atomicity of the operation. The intended use case is + * the ARM memory type field of each PTE, where access to pages with + * Device memory type require alignment. + */ + if (unlikely(flags & TLB_CHECK_ALIGNED)) { + MemOp size = l->memop & MO_SIZE; + + switch (l->memop & MO_ATOM_MASK) { + case MO_ATOM_NONE: + size = MO_8; + break; + case MO_ATOM_IFALIGN_PAIR: + case MO_ATOM_WITHIN16_PAIR: + size = size ? size - 1 : 0; + break; + default: + break; + } + if (addr & ((1 << size) - 1)) { + cpu_unaligned_access(cpu, addr, type, l->mmu_idx, ra); + } + } + return crosspage; } -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> If translation is disabled, the default memory type is Device, which requires alignment checking. This is more optimally done early via the MemOp given to the TCG memory operation. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reported-by: Idan Horowitz <idan.horowitz@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240301204110.656742-6-richard.henderson@linaro.org Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1204 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/hflags.c | 34 ++++++++++++++++++++++++++++++++-- 1 file changed, 32 insertions(+), 2 deletions(-) diff --git a/target/arm/tcg/hflags.c b/target/arm/tcg/hflags.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/hflags.c +++ b/target/arm/tcg/hflags.c @@ -XXX,XX +XXX,XX @@ static inline bool fgt_svc(CPUARMState *env, int el) FIELD_EX64(env->cp15.fgt_exec[FGTREG_HFGITR], HFGITR_EL2, SVC_EL1); } +/* Return true if memory alignment should be enforced. */ +static bool aprofile_require_alignment(CPUARMState *env, int el, uint64_t sctlr) +{ +#ifdef CONFIG_USER_ONLY + return false; +#else + /* Check the alignment enable bit. */ + if (sctlr & SCTLR_A) { + return true; + } + + /* + * If translation is disabled, then the default memory type is + * Device(-nGnRnE) instead of Normal, which requires that alignment + * be enforced. Since this affects all ram, it is most efficient + * to handle this during translation. + */ + if (sctlr & SCTLR_M) { + /* Translation enabled: memory type in PTE via MAIR_ELx. */ + return false; + } + if (el < 2 && (arm_hcr_el2_eff(env) & (HCR_DC | HCR_VM))) { + /* Stage 2 translation enabled: memory type in PTE. */ + return false; + } + return true; +#endif +} + static CPUARMTBFlags rebuild_hflags_common(CPUARMState *env, int fp_el, ARMMMUIdx mmu_idx, CPUARMTBFlags flags) @@ -XXX,XX +XXX,XX @@ static CPUARMTBFlags rebuild_hflags_a32(CPUARMState *env, int fp_el, { CPUARMTBFlags flags = {}; int el = arm_current_el(env); + uint64_t sctlr = arm_sctlr(env, el); - if (arm_sctlr(env, el) & SCTLR_A) { + if (aprofile_require_alignment(env, el, sctlr)) { DP_TBFLAG_ANY(flags, ALIGN_MEM, 1); } @@ -XXX,XX +XXX,XX @@ static CPUARMTBFlags rebuild_hflags_a64(CPUARMState *env, int el, int fp_el, sctlr = regime_sctlr(env, stage1); - if (sctlr & SCTLR_A) { + if (aprofile_require_alignment(env, el, sctlr)) { DP_TBFLAG_ANY(flags, ALIGN_MEM, 1); } -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> If translation is enabled, and the PTE memory type is Device, enable checking alignment via TLB_CHECK_ALIGNMENT. While the check is done later than it should be per the ARM, it's better than not performing the check at all. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240301204110.656742-7-richard.henderson@linaro.org [PMM: tweaks to comment text] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/ptw.c | 39 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) diff --git a/target/arm/ptw.c b/target/arm/ptw.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/ptw.c +++ b/target/arm/ptw.c @@ -XXX,XX +XXX,XX @@ static bool granule_protection_check(CPUARMState *env, uint64_t paddress, return false; } +static bool S1_attrs_are_device(uint8_t attrs) +{ + /* + * This slightly under-decodes the MAIR_ELx field: + * 0b0000dd01 is Device with FEAT_XS, otherwise UNPREDICTABLE; + * 0b0000dd1x is UNPREDICTABLE. + */ + return (attrs & 0xf0) == 0; +} + static bool S2_attrs_are_device(uint64_t hcr, uint8_t attrs) { /* @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_lpae(CPUARMState *env, S1Translate *ptw, bool aarch64 = arm_el_is_aa64(env, el); uint64_t descriptor, new_descriptor; ARMSecuritySpace out_space; + bool device; /* TODO: This code does not support shareability levels. */ if (aarch64) { @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_lpae(CPUARMState *env, S1Translate *ptw, if (regime_is_stage2(mmu_idx)) { result->cacheattrs.is_s2_format = true; result->cacheattrs.attrs = extract32(attrs, 2, 4); + /* + * Security state does not really affect HCR_EL2.FWB; + * we only need to filter FWB for aa32 or other FEAT. + */ + device = S2_attrs_are_device(arm_hcr_el2_eff(env), + result->cacheattrs.attrs); } else { /* Index into MAIR registers for cache attributes */ uint8_t attrindx = extract32(attrs, 2, 3); @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_lpae(CPUARMState *env, S1Translate *ptw, if (aarch64 && cpu_isar_feature(aa64_bti, cpu)) { result->f.extra.arm.guarded = extract64(attrs, 50, 1); /* GP */ } + device = S1_attrs_are_device(result->cacheattrs.attrs); + } + + /* + * Enable alignment checks on Device memory. + * + * Per R_XCHFJ, this check is mis-ordered. The correct ordering + * for alignment, permission, and stage 2 faults should be: + * - Alignment fault caused by the memory type + * - Permission fault + * - A stage 2 fault on the memory access + * but due to the way the TCG softmmu TLB operates, we will have + * implicitly done the permission check and the stage2 lookup in + * finding the TLB entry, so the alignment check cannot be done sooner. + * + * In v7, for a CPU without the Virtualization Extensions this + * access is UNPREDICTABLE; we choose to make it take the alignment + * fault as is required for a v7VE CPU. (QEMU doesn't emulate any + * CPUs with ARM_FEATURE_LPAE but not ARM_FEATURE_V7VE anyway.) + */ + if (device) { + result->f.tlb_fill_flags |= TLB_CHECK_ALIGNED; } /* -- 2.34.1 The qatomic_cmpxchg() and qatomic_cmpxchg__nocheck() macros have a comment that reads: Returns the eventual value, failed or not This is somewhere between cryptic and wrong, since the value actually returned is the value that was in memory before the cmpxchg. Reword to match how we describe these macros in atomics.rst. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Zhao Liu <zhao1.liu@intel.com> Message-id: 20240223182035.1048541-1-peter.maydell@linaro.org --- include/qemu/atomic.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/qemu/atomic.h b/include/qemu/atomic.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/atomic.h +++ b/include/qemu/atomic.h @@ -XXX,XX +XXX,XX @@ qatomic_xchg__nocheck(ptr, i); \ }) -/* Returns the eventual value, failed or not */ +/* Returns the old value of '*ptr' (whether the cmpxchg failed or not) */ #define qatomic_cmpxchg__nocheck(ptr, old, new) ({ \ typeof_strip_qual(*ptr) _old = (old); \ (void)__atomic_compare_exchange_n(ptr, &_old, new, false, \ -- 2.34.1 From: Steven Shen <steven.shen@jaguarmicro.com> Before v2.12, the implementation of serial ports was limited to a value of MAX_SERIAL_PORTS = 4. We now dynamically allocate the data structures for serial ports, so this limit is no longer present, but the documentation for the -serial options still reads: "This option can be used several times to simulate up to 4 serial ports." Update to "This option can be used several times to simulate multiple serial ports." to avoid misleading. Signed-off-by: Steven Shen <steven.shen@jaguarmicro.com> Message-id: 20240305013016.2268-1-steven.shen@jaguarmicro.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: tweaked commit message] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- qemu-options.hx | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/qemu-options.hx b/qemu-options.hx index XXXXXXX..XXXXXXX 100644 --- a/qemu-options.hx +++ b/qemu-options.hx @@ -XXX,XX +XXX,XX @@ SRST default device is ``vc`` in graphical mode and ``stdio`` in non graphical mode. - This option can be used several times to simulate up to 4 serial + This option can be used several times to simulate multiple serial ports. You can use ``-serial none`` to suppress the creation of default -- 2.34.1 Hi; here's another arm pullreq; main parts here are the new i.MX 8MM EVK board, and a lot of refactoring. thanks -- PMM The following changes since commit aa15257174da180c6a8a9d58f87319cfe61c5520: Merge tag 'pbouvier/pr/plugins-20260424' of https://gitlab.com/p-b-o/qemu into staging (2026-04-25 10:22:04 -0400) are available in the Git repository at: https://gitlab.com/pm215/qemu.git tags/pull-target-arm-20260427 for you to fetch changes up to 4575da5ecb7a27544aa6da1f78e700e8100ceaea: target/arm: report register in WFIT syndromes (2026-04-27 11:46:34 +0100) ---------------------------------------------------------------- target-arm queue: docs/system: add FEAT_AA32 and FEAT_AA64 to emulation list hw/arm: Add the i.MX 8MM EVK(Evaluation Kit) board target/arm: Build M-profile helper code once only hw/arm: Remove hw_error() for the unimplemented CM_LMBUSCNT register hw: Move ARM_SYSCTL_GPIO definitions to arm sysctl specific header target/arm: Allow 'aarch64=off' to be set for TCG CPUs target/arm: Allow some sysregs to not have to be an exact match for migration hw/arm/raspi4b: NOP all DTB nodes when removing unimplemented devices hw/arm/fsl-imx6ul: Implement LCDIF display device target/arm: Refactor syndrome value code to use registerfields target/arm: Report the register in WFxT syndromes ---------------------------------------------------------------- Alex Bennée (24): docs/system: add FEAT_AA32 and FEAT_AA64 to emulation list target/arm: migrate basic syndrome helpers to registerfields target/arm: migrate system/cp trap syndromes to registerfields target/arm: migrate FP/SIMD trap syndromes to registerfields target/arm: migrate eret trap syndromes to registerfields target/arm: migrate SME trap syndromes to registerfields target/arm: migrate PAC trap syndromes to registerfields target/arm: migrate BTI trap syndromes to registerfields target/arm: migrate BXJ trap syndromes to registerfields target/arm: migrate Granule Protection traps to registerfields target/arm: migrate fault syndromes to registerfields target/arm: migrate debug syndromes to registerfields target/arm: migrate wfx syndromes to registerfields target/arm: migrate gcs syndromes to registerfields target/arm: migrate memory op syndromes to registerfields target/arm: migrate check_hcr_el2_trap to use syndrome helper target/arm: use syndrome helpers in arm_cpu_do_interrupt_aarch32_hyp target/arm: use syndrome helpers to set SAME_EL EC bit target/arm: make whpx use syndrome helpers for decode target/arm: make hvf use syndrome helpers for decode target/arm: use syndrome helpers in merge_syn_data_abort target/arm: use syndrome helpers to query VNCR bit target/arm: remove old syndrome defines target/arm: report register in WFIT syndromes Eric Auger (7): target/arm/cpu: Introduce the infrastructure for cpreg migration tolerances target/arm/machine: Handle ToleranceNotOnBothEnds migration tolerances target/arm/machine: Handle ToleranceOnlySrcTestValue migration tolerance target/arm/cpu64: Mitigate migration failures due to spurious TCR_EL1, PIRE0_EL1 and PIR_EL1 target/arm/cpu64: Define cpreg migration tolerance for KVM_REG_ARM_VENDOR_HYP_BMAP_2 target/arm/helper: Define cpreg migration tolerance for DGBDTR_EL0 Revert "target/arm: Reinstate bogus AArch32 DBGDTRTX register for migration compat" Gaurav Sharma (15): hw/arm: Add the i.MX 8MM EVK(Evaluation Kit) board hw/misc/imx8mp_analog: Add property to analog device hw/arm/fsl-imx8mm: Add Analog device IP to iMX8MM SOC hw/arm/fsl-imx8mm: Add Clock Control Module IP to iMX8MM hw/arm/fsl-imx8mm: Implemented support for SNVS hw/arm/fsl-imx8mm: Adding support for USDHC storage controllers hw/arm/fsl-imx8mm: Add PCIe support hw/arm/fsl-imx8mm: Add GPIO controllers hw/arm/fsl-imx8mm: Adding support for I2C emulation hw/arm/fsl-imx8mm: Adding support for SPI controller hw/arm/fsl-imx8mm: Adding support for Watchdog Timers hw/arm/fsl-imx8mm: Adding support for General Purpose Timers hw/arm/fsl-imx8mm: Adding support for ENET ethernet controller hw/arm/fsl-imx8mm: Adding support for USB controller hw/arm/fsl-imx8mm: Adding functional testing of iMX8MM emulation Osama Abdelkader (1): hw/arm/raspi4b: NOP all DTB nodes when removing unimplemented devices Peter Maydell (4): hw: Move ARM_SYSCTL_GPIO definitions to arm sysctl specific header target/arm: Clear AArch64 ID regs from ARMISARegisters if AArch64 disabled target/arm: Allow 'aarch64=off' to be set for TCG CPUs tests/functional/aarch64: Add basic test of TCG aarch64=off Philippe Mathieu-Daudé (9): target/arm: Ignore endianness when setting MTE tags target/arm: Explode MO_TExx -> MO_TE | MO_xx target/arm: Hoist MO_TE into mve_advance_vpt() target/arm: Hoist MO_TE into MVE DO_VSTR() macro target/arm: Introduce mo_endian() helper target/arm: Replace MO_TE -> mo_endian() for MVE helpers target/arm: Compile mve_helper.c once target/arm: Replace MO_TE -> mo_endian() for Cortex-M helpers target/arm: Compile m_helper.c once Thomas Huth (1): hw/arm: Remove hw_error() for the unimplemented CM_LMBUSCNT register Yucai Liu (2): hw/display: Add i.MX6UL LCDIF device model hw/arm/fsl-imx6ul: Wire in the LCDIF device model MAINTAINERS | 16 +- docs/system/arm/cpu-features.rst | 10 +- docs/system/arm/emulation.rst | 2 + docs/system/arm/{imx8mp-evk.rst => imx8m.rst} | 49 +- docs/system/target-arm.rst | 2 +- hw/arm/Kconfig | 25 + hw/arm/fsl-imx6ul.c | 12 +- hw/arm/fsl-imx8mm.c | 704 ++++++++++++++++++++++ hw/arm/imx8mm-evk.c | 130 ++++ hw/arm/integratorcp.c | 3 - hw/arm/meson.build | 2 + hw/arm/raspi4b.c | 10 +- hw/arm/realview.c | 2 +- hw/arm/vexpress.c | 2 +- hw/arm/virt.c | 1 - hw/display/Kconfig | 4 + hw/display/imx6ul_lcdif.c | 453 ++++++++++++++ hw/display/meson.build | 1 + hw/misc/arm_sysctl.c | 2 +- hw/misc/imx8mp_analog.c | 12 +- hw/timer/imx_gpt.c | 26 + hw/vmapple/vmapple.c | 1 - include/hw/arm/fsl-imx6ul.h | 4 +- include/hw/arm/fsl-imx8mm.h | 242 ++++++++ include/hw/arm/primecell.h | 12 - include/hw/display/imx6ul_lcdif.h | 37 ++ include/hw/misc/arm_sysctl.h | 16 + include/hw/misc/imx8mp_analog.h | 3 + include/hw/timer/imx_gpt.h | 2 + target/arm/cpu-features.h | 5 + target/arm/cpu.c | 153 ++++- target/arm/cpu.h | 4 +- target/arm/cpu64.c | 39 ++ target/arm/debug_helper.c | 29 - target/arm/helper.c | 27 +- target/arm/hvf/hvf.c | 14 +- target/arm/internals.h | 60 ++ target/arm/machine.c | 33 +- target/arm/syndrome.h | 595 ++++++++++++++---- target/arm/tcg/debug.c | 2 +- target/arm/tcg/helper-a64.c | 2 +- target/arm/tcg/helper-defs.h | 2 +- target/arm/tcg/m_helper.c | 8 +- target/arm/tcg/meson.build | 6 +- target/arm/tcg/mve_helper.c | 102 ++-- target/arm/tcg/op_helper.c | 7 +- target/arm/tcg/tlb_helper.c | 6 +- target/arm/tcg/translate-a64.c | 2 +- target/arm/tcg/vfp_helper.c | 5 +- target/arm/trace-events | 2 + target/arm/whpx/whpx-all.c | 13 +- tests/functional/aarch64/meson.build | 3 + tests/functional/aarch64/test_imx8mm_evk.py | 69 +++ tests/functional/aarch64/test_virt_aarch64_off.py | 37 ++ tests/qtest/arm-cpu-features.c | 8 +- 55 files changed, 2743 insertions(+), 275 deletions(-) rename docs/system/arm/{imx8mp-evk.rst => imx8m.rst} (58%) create mode 100644 hw/arm/fsl-imx8mm.c create mode 100644 hw/arm/imx8mm-evk.c create mode 100644 hw/display/imx6ul_lcdif.c create mode 100644 include/hw/arm/fsl-imx8mm.h delete mode 100644 include/hw/arm/primecell.h create mode 100644 include/hw/display/imx6ul_lcdif.h create mode 100644 include/hw/misc/arm_sysctl.h create mode 100755 tests/functional/aarch64/test_imx8mm_evk.py create mode 100755 tests/functional/aarch64/test_virt_aarch64_off.py From: Alex Bennée <alex.bennee@linaro.org> This is just a documentation tweak as we already support both. FEAT_AA32 implies FEAT_AA32EL0. FEAT_AA64 implies FEAT_AA64EL[0123]. This is however useful if you are using emulation.rst as a source of truth of what QEMU emulates and when cross checking with Features.json from Arm. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260421093506.616307-1-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 2 ++ 1 file changed, 2 insertions(+) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ QEMU's TCG emulation includes support for the Armv5, Armv6, Armv7, Armv8 and Armv9 versions of the A-profile architecture. It also has support for the following architecture extensions: +- FEAT_AA32 (PE Support for AArch32) - FEAT_AA32BF16 (AArch32 BFloat16 instructions) - FEAT_AA32EL0 (Support for AArch32 at EL0) - FEAT_AA32EL1 (Support for AArch32 at EL1) @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_AA32EL3 (Support for AArch32 at EL3) - FEAT_AA32HPD (AArch32 hierarchical permission disables) - FEAT_AA32I8MM (AArch32 Int8 matrix multiplication instructions) +- FEAT_AA64 (PE uses AArch64 after last reboot) - FEAT_AA64EL0 (Support for AArch64 at EL0) - FEAT_AA64EL1 (Support for AArch64 at EL1) - FEAT_AA64EL2 (Support for AArch64 at EL2) -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> Implemented CPUs, RAM, UARTs and Interrupt Controller Other peripherals are represented as TYPE_UNIMPLEMENTED_DEVICE Complete memory map of the SoC is provided. Set default RAM size to 2GB and default CPU count to 4 to match the real i.MX8MM EVK hardware configuration. Documentation is shared with imx8mp-evk to avoid duplication. Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> [PMM: fixed over-long lines in doc] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 11 +- docs/system/arm/{imx8mp-evk.rst => imx8m.rst} | 49 ++- docs/system/target-arm.rst | 2 +- hw/arm/Kconfig | 12 + hw/arm/fsl-imx8mm.c | 377 ++++++++++++++++++ hw/arm/imx8mm-evk.c | 112 ++++++ hw/arm/meson.build | 2 + include/hw/arm/fsl-imx8mm.h | 158 ++++++++ 8 files changed, 709 insertions(+), 14 deletions(-) rename docs/system/arm/{imx8mp-evk.rst => imx8m.rst} (58%) create mode 100644 hw/arm/fsl-imx8mm.c create mode 100644 hw/arm/imx8mm-evk.c create mode 100644 include/hw/arm/fsl-imx8mm.h diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/pci-host/designware.c F: include/hw/pci-host/designware.h F: docs/system/arm/mcimx7d-sabre.rst +MCIMX8MM-EVK / iMX8MM +M: Gaurav Sharma <gaurav.sharma_7@nxp.com> +L: qemu-arm@nongnu.org +S: Maintained +F: hw/arm/fsl-imx8mm.c +F: hw/arm/imx8mm-evk.c +F: include/hw/arm/fsl-imx8mm.h +F: docs/system/arm/imx8m.rst + MCIMX8MP-EVK / i.MX8MP M: Bernhard Beschow <shentey@gmail.com> L: qemu-arm@nongnu.org @@ -XXX,XX +XXX,XX @@ F: hw/rtc/rs5c372.c F: include/hw/arm/fsl-imx8mp.h F: include/hw/misc/imx8mp_*.h F: include/hw/pci-host/fsl_imx8m_phy.h -F: docs/system/arm/imx8mp-evk.rst +F: docs/system/arm/imx8m.rst F: tests/functional/aarch64/test_imx8mp_evk.py F: tests/qtest/rs5c372-test.c diff --git a/docs/system/arm/imx8mp-evk.rst b/docs/system/arm/imx8m.rst similarity index 58% rename from docs/system/arm/imx8mp-evk.rst rename to docs/system/arm/imx8m.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/imx8mp-evk.rst +++ b/docs/system/arm/imx8m.rst @@ -XXX,XX +XXX,XX @@ -NXP i.MX 8M Plus Evaluation Kit (``imx8mp-evk``) -================================================ +NXP i.MX 8M Plus and i.MX 8M Mini Evaluation Kits (``imx8mp-evk``, ``imx8mm-evk``) +================================================================================== -The ``imx8mp-evk`` machine models the i.MX 8M Plus Evaluation Kit, based on an -i.MX 8M Plus SoC. +The ``imx8mp-evk`` and ``imx8mm-evk`` machine models the i.MX 8M Plus +and i.MX 8M Mini Evaluation Kits, based on i.MX 8M Plus and i.MX8M +Mini SoCs. Supported devices ----------------- -The ``imx8mp-evk`` machine implements the following devices: +The ``imx8mp-evk`` and ``imx8mm-evk`` machines implement the +following devices: * Up to 4 Cortex-A53 cores * Generic Interrupt Controller (GICv3) @@ -XXX,XX +XXX,XX @@ The ``imx8mp-evk`` machine implements the following devices: Boot options ------------ -The ``imx8mp-evk`` machine can start a Linux kernel directly using the standard -``-kernel`` functionality. +The ``imx8mp-evk`` and ``imx8mm-evk`` machines can start a Linux +kernel directly using the standard ``-kernel`` functionality. Direct Linux Kernel Boot '''''''''''''''''''''''' @@ -XXX,XX +XXX,XX @@ is to generate an image with Buildroot. Version 2024.11.1 is tested at the time of writing and involves two steps. First run the following commands in the toplevel directory of the Buildroot source tree: +For i.MX 8M Plus EVK: + .. code-block:: bash $ make freescale_imx8mpevk_defconfig $ make +For i.MX 8M Mini EVK: + +.. code-block:: bash + + $ make freescale_imx8mmevk_defconfig + $ make + Once finished successfully there is an ``output/image`` subfolder. Navigate into it and resize the SD card image to a power of two: @@ -XXX,XX +XXX,XX @@ it and resize the SD card image to a power of two: Now that everything is prepared the machine can be started as follows: +For i.MX 8M Plus EVK: + .. code-block:: bash $ qemu-system-aarch64 -M imx8mp-evk \ @@ -XXX,XX +XXX,XX @@ Now that everything is prepared the machine can be started as follows: -append "root=/dev/mmcblk2p2" \ -drive file=sdcard.img,if=sd,bus=2,format=raw,id=mmcblk2 +For i.MX 8M Mini EVK: + +.. code-block:: bash + + $ qemu-system-aarch64 -M imx8mm-evk -smp 4 -m 2G \ + -display none -serial null -serial stdio \ + -kernel Image \ + -dtb imx8mm-evk.dtb \ + -append "root=/dev/mmcblk2p2" \ + -drive file=sdcard.img,if=sd,bus=2,format=raw,id=mmcblk2 KVM Acceleration ---------------- @@ -XXX,XX +XXX,XX @@ To enable hardware-assisted acceleration via KVM, append ``-accel kvm`` to the command line. While this speeds up performance significantly, be aware of the following limitations: -* The ``imx8mp-evk`` machine is not included under the "virtualization use case" - of :doc:`QEMU's security policy </system/security>`. This means that you - should not trust that it can contain malicious guests, whether it is run - using TCG or KVM. If you don't trust your guests and you're relying on QEMU to - be the security boundary, you want to choose another machine such as ``virt``. +* The ``imx8mp-evk`` and ``imx8mm-evk`` machines are not included + under the "virtualization use case" of :doc:`QEMU's security + policy </system/security>`. This means that you should not trust that + it can contain malicious guests, whether it is run using TCG or KVM. + If you don't trust your guests and you're relying on QEMU to be the + security boundary, you want to choose another machine such as + ``virt``. * Rather than Cortex-A53 CPUs, the same CPU type as the host's will be used. This is a limitation of KVM and may not work with guests with a tight dependency on Cortex-A53. diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/target-arm.rst +++ b/docs/system/target-arm.rst @@ -XXX,XX +XXX,XX @@ Board-specific documentation arm/imx25-pdk arm/mcimx6ul-evk arm/mcimx7d-sabre - arm/imx8mp-evk + arm/imx8m arm/orangepi arm/raspi arm/collie diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MP_EVK depends on TCG select FSL_IMX8MP +config FSL_IMX8MM + bool + select ARM_GIC + select IMX + +config FSL_IMX8MM_EVK + bool + default y + depends on AARCH64 + depends on TCG + select FSL_IMX8MM + config ARM_SMMUV3_ACCEL bool depends on ARM_SMMUV3 diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ +/* + * i.MX 8MM SoC Implementation + * + * Based on hw/arm/fsl-imx6.c + * + * Copyright (c) 2025, NXP Semiconductors + * Author: Gaurav Sharma <gaurav.sharma_7@nxp.com> + * + * SPDX-License-Identifier: GPL-2.0-or-later + * + * iMX8MM Reference Manual - https://www.nxp.com/products/i.MX8MMINI -> Documentation + */ + +#include "qemu/osdep.h" +#include "system/address-spaces.h" +#include "hw/arm/bsa.h" +#include "hw/arm/fsl-imx8mm.h" +#include "hw/misc/unimp.h" +#include "hw/core/boards.h" +#include "system/kvm.h" +#include "system/system.h" +#include "target/arm/cpu.h" +#include "target/arm/cpu-qom.h" +#include "target/arm/kvm_arm.h" +#include "qapi/error.h" +#include "qobject/qlist.h" + +static const struct { + hwaddr addr; + size_t size; + const char *name; +} fsl_imx8mm_memmap[] = { + [FSL_IMX8MM_RAM] = { FSL_IMX8MM_RAM_START, FSL_IMX8MM_RAM_SIZE_MAX, "ram" }, + [FSL_IMX8MM_DDR_PHY_BROADCAST] = { 0x3dc00000, 4 * MiB, "ddr_phy_broadcast" }, + [FSL_IMX8MM_DDR_PERF_MON] = { 0x3d800000, 4 * MiB, "ddr_perf_mon" }, + [FSL_IMX8MM_DDR_CTL] = { 0x3d400000, 4 * MiB, "ddr_ctl" }, + [FSL_IMX8MM_DDR_PHY] = { 0x3c000000, 16 * MiB, "ddr_phy" }, + [FSL_IMX8MM_GIC_DIST] = { 0x38800000, 512 * KiB, "gic_dist" }, + [FSL_IMX8MM_GIC_REDIST] = { 0x38880000, 512 * KiB, "gic_redist" }, + [FSL_IMX8MM_VPU] = { 0x38340000, 2 * MiB, "vpu" }, + [FSL_IMX8MM_VPU_BLK_CTRL] = { 0x38330000, 2 * MiB, "vpu_blk_ctrl" }, + [FSL_IMX8MM_VPU_G2_DECODER] = { 0x38310000, 1 * MiB, "vpu_g2_decoder" }, + [FSL_IMX8MM_VPU_G1_DECODER] = { 0x38300000, 1 * MiB, "vpu_g1_decoder" }, + [FSL_IMX8MM_USB2_OTG] = { 0x32e50200, 0x200, "usb2_otg" }, + [FSL_IMX8MM_USB2] = { 0x32e50000, 0x200, "usb2" }, + [FSL_IMX8MM_USB1_OTG] = { 0x32e40200, 0x200, "usb1_otg" }, + [FSL_IMX8MM_USB1] = { 0x32e40000, 0x200, "usb1" }, + [FSL_IMX8MM_GPU2D] = { 0x38000000, 64 * KiB, "gpu2d" }, + [FSL_IMX8MM_QSPI1_RX_BUFFER] = { 0x34000000, 32 * MiB, "qspi1_rx_buffer" }, + [FSL_IMX8MM_PCIE1] = { 0x33800000, 4 * MiB, "pcie1" }, + [FSL_IMX8MM_QSPI1_TX_BUFFER] = { 0x33008000, 32 * KiB, "qspi1_tx_buffer" }, + [FSL_IMX8MM_APBH_DMA] = { 0x33000000, 32 * KiB, "apbh_dma" }, + + /* AIPS-4 Begin */ + [FSL_IMX8MM_TZASC] = { 0x32f80000, 64 * KiB, "tzasc" }, + [FSL_IMX8MM_PCIE_PHY1] = { 0x32f00000, 64 * KiB, "pcie_phy1" }, + [FSL_IMX8MM_MEDIA_BLK_CTL] = { 0x32e28000, 256, "media_blk_ctl" }, + [FSL_IMX8MM_LCDIF] = { 0x32e00000, 64 * KiB, "lcdif" }, + [FSL_IMX8MM_MIPI_DSI] = { 0x32e10000, 64 * KiB, "mipi_dsi" }, + [FSL_IMX8MM_MIPI_CSI] = { 0x32e30000, 64 * KiB, "mipi_csi" }, + [FSL_IMX8MM_AIPS4_CONFIGURATION] = { 0x32df0000, 64 * KiB, "aips4_configuration" }, + /* AIPS-4 End */ + + [FSL_IMX8MM_INTERCONNECT] = { 0x32700000, 1 * MiB, "interconnect" }, + + /* AIPS-3 Begin */ + [FSL_IMX8MM_ENET1] = { 0x30be0000, 64 * KiB, "enet1" }, + [FSL_IMX8MM_SDMA1] = { 0x30bd0000, 64 * KiB, "sdma1" }, + [FSL_IMX8MM_QSPI] = { 0x30bb0000, 64 * KiB, "qspi" }, + [FSL_IMX8MM_USDHC3] = { 0x30b60000, 64 * KiB, "usdhc3" }, + [FSL_IMX8MM_USDHC2] = { 0x30b50000, 64 * KiB, "usdhc2" }, + [FSL_IMX8MM_USDHC1] = { 0x30b40000, 64 * KiB, "usdhc1" }, + [FSL_IMX8MM_SEMAPHORE_HS] = { 0x30ac0000, 64 * KiB, "semaphore_hs" }, + [FSL_IMX8MM_MU_B] = { 0x30ab0000, 64 * KiB, "mu_b" }, + [FSL_IMX8MM_MU_A] = { 0x30aa0000, 64 * KiB, "mu_a" }, + [FSL_IMX8MM_UART4] = { 0x30a60000, 64 * KiB, "uart4" }, + [FSL_IMX8MM_I2C4] = { 0x30a50000, 64 * KiB, "i2c4" }, + [FSL_IMX8MM_I2C3] = { 0x30a40000, 64 * KiB, "i2c3" }, + [FSL_IMX8MM_I2C2] = { 0x30a30000, 64 * KiB, "i2c2" }, + [FSL_IMX8MM_I2C1] = { 0x30a20000, 64 * KiB, "i2c1" }, + [FSL_IMX8MM_AIPS3_CONFIGURATION] = { 0x309f0000, 64 * KiB, "aips3_configuration" }, + [FSL_IMX8MM_CAAM] = { 0x30900000, 256 * KiB, "caam" }, + [FSL_IMX8MM_SPBA1] = { 0x308f0000, 64 * KiB, "spba1" }, + [FSL_IMX8MM_UART2] = { 0x30890000, 64 * KiB, "uart2" }, + [FSL_IMX8MM_UART3] = { 0x30880000, 64 * KiB, "uart3" }, + [FSL_IMX8MM_UART1] = { 0x30860000, 64 * KiB, "uart1" }, + [FSL_IMX8MM_ECSPI3] = { 0x30840000, 64 * KiB, "ecspi3" }, + [FSL_IMX8MM_ECSPI2] = { 0x30830000, 64 * KiB, "ecspi2" }, + [FSL_IMX8MM_ECSPI1] = { 0x30820000, 64 * KiB, "ecspi1" }, + /* AIPS-3 End */ + + /* AIPS-2 Begin */ + [FSL_IMX8MM_QOSC] = { 0x307f0000, 64 * KiB, "qosc" }, + [FSL_IMX8MM_PERFMON2] = { 0x307d0000, 64 * KiB, "perfmon2" }, + [FSL_IMX8MM_PERFMON1] = { 0x307c0000, 64 * KiB, "perfmon1" }, + [FSL_IMX8MM_GPT4] = { 0x30700000, 64 * KiB, "gpt4" }, + [FSL_IMX8MM_GPT5] = { 0x306f0000, 64 * KiB, "gpt5" }, + [FSL_IMX8MM_GPT6] = { 0x306e0000, 64 * KiB, "gpt6" }, + [FSL_IMX8MM_SYSCNT_CTRL] = { 0x306c0000, 64 * KiB, "syscnt_ctrl" }, + [FSL_IMX8MM_SYSCNT_CMP] = { 0x306b0000, 64 * KiB, "syscnt_cmp" }, + [FSL_IMX8MM_SYSCNT_RD] = { 0x306a0000, 64 * KiB, "syscnt_rd" }, + [FSL_IMX8MM_PWM4] = { 0x30690000, 64 * KiB, "pwm4" }, + [FSL_IMX8MM_PWM3] = { 0x30680000, 64 * KiB, "pwm3" }, + [FSL_IMX8MM_PWM2] = { 0x30670000, 64 * KiB, "pwm2" }, + [FSL_IMX8MM_PWM1] = { 0x30660000, 64 * KiB, "pwm1" }, + [FSL_IMX8MM_AIPS2_CONFIGURATION] = { 0x305f0000, 64 * KiB, "aips2_configuration" }, + /* AIPS-2 End */ + + /* AIPS-1 Begin */ + [FSL_IMX8MM_CSU] = { 0x303e0000, 64 * KiB, "csu" }, + [FSL_IMX8MM_RDC] = { 0x303d0000, 64 * KiB, "rdc" }, + [FSL_IMX8MM_SEMAPHORE2] = { 0x303c0000, 64 * KiB, "semaphore2" }, + [FSL_IMX8MM_SEMAPHORE1] = { 0x303b0000, 64 * KiB, "semaphore1" }, + [FSL_IMX8MM_GPC] = { 0x303a0000, 64 * KiB, "gpc" }, + [FSL_IMX8MM_SRC] = { 0x30390000, 64 * KiB, "src" }, + [FSL_IMX8MM_CCM] = { 0x30380000, 64 * KiB, "ccm" }, + [FSL_IMX8MM_SNVS_HP] = { 0x30370000, 64 * KiB, "snvs_hp" }, + [FSL_IMX8MM_ANA_PLL] = { 0x30360000, 64 * KiB, "ana_pll" }, + [FSL_IMX8MM_OCOTP_CTRL] = { 0x30350000, 64 * KiB, "ocotp_ctrl" }, + [FSL_IMX8MM_IOMUXC_GPR] = { 0x30340000, 64 * KiB, "iomuxc_gpr" }, + [FSL_IMX8MM_IOMUXC] = { 0x30330000, 64 * KiB, "iomuxc" }, + [FSL_IMX8MM_GPT3] = { 0x302f0000, 64 * KiB, "gpt3" }, + [FSL_IMX8MM_GPT2] = { 0x302e0000, 64 * KiB, "gpt2" }, + [FSL_IMX8MM_GPT1] = { 0x302d0000, 64 * KiB, "gpt1" }, + [FSL_IMX8MM_SDMA2] = { 0x302c0000, 64 * KiB, "sdma2" }, + [FSL_IMX8MM_SDMA3] = { 0x302b0000, 64 * KiB, "sdma3" }, + [FSL_IMX8MM_WDOG3] = { 0x302a0000, 64 * KiB, "wdog3" }, + [FSL_IMX8MM_WDOG2] = { 0x30290000, 64 * KiB, "wdog2" }, + [FSL_IMX8MM_WDOG1] = { 0x30280000, 64 * KiB, "wdog1" }, + [FSL_IMX8MM_ANA_OSC] = { 0x30270000, 64 * KiB, "ana_osc" }, + [FSL_IMX8MM_ANA_TSENSOR] = { 0x30260000, 64 * KiB, "ana_tsensor" }, + [FSL_IMX8MM_GPIO5] = { 0x30240000, 64 * KiB, "gpio5" }, + [FSL_IMX8MM_GPIO4] = { 0x30230000, 64 * KiB, "gpio4" }, + [FSL_IMX8MM_GPIO3] = { 0x30220000, 64 * KiB, "gpio3" }, + [FSL_IMX8MM_GPIO2] = { 0x30210000, 64 * KiB, "gpio2" }, + [FSL_IMX8MM_GPIO1] = { 0x30200000, 64 * KiB, "gpio1" }, + [FSL_IMX8MM_AIPS1_CONFIGURATION] = { 0x301f0000, 64 * KiB, "aips1_configuration" }, + [FSL_IMX8MM_SAI6] = { 0x30060000, 64 * KiB, "sai6" }, + [FSL_IMX8MM_SAI5] = { 0x30050000, 64 * KiB, "sai5" }, + [FSL_IMX8MM_SAI3] = { 0x30030000, 64 * KiB, "sai3" }, + [FSL_IMX8MM_SAI2] = { 0x30020000, 64 * KiB, "sai2" }, + [FSL_IMX8MM_SAI1] = { 0x30010000, 64 * KiB, "sai1" }, + + /* AIPS-1 End */ + + [FSL_IMX8MM_A53_DAP] = { 0x28000000, 16 * MiB, "a53_dap" }, + [FSL_IMX8MM_PCIE1_MEM] = { 0x18000000, 128 * MiB, "pcie1_mem" }, + [FSL_IMX8MM_QSPI_MEM] = { 0x08000000, 256 * MiB, "qspi_mem" }, + [FSL_IMX8MM_OCRAM] = { 0x00900000, 256 * KiB, "ocram" }, + [FSL_IMX8MM_TCM_DTCM] = { 0x00800000, 128 * KiB, "tcm_dtcm" }, + [FSL_IMX8MM_TCM_ITCM] = { 0x007e0000, 128 * KiB, "tcm_itcm" }, + [FSL_IMX8MM_OCRAM_S] = { 0x00180000, 32 * KiB, "ocram_s" }, + [FSL_IMX8MM_CAAM_MEM] = { 0x00100000, 32 * KiB, "caam_mem" }, + [FSL_IMX8MM_BOOT_ROM_PROTECTED] = { 0x0003f000, 4 * KiB, "boot_rom_protected" }, + [FSL_IMX8MM_BOOT_ROM] = { 0x00000000, 252 * KiB, "boot_rom" }, +}; + +static void fsl_imx8mm_init(Object *obj) +{ + MachineState *ms = MACHINE(qdev_get_machine()); + FslImx8mmState *s = FSL_IMX8MM(obj); + const char *cpu_type = ms->cpu_type ?: ARM_CPU_TYPE_NAME("cortex-a53"); + int i; + + for (i = 0; i < MIN(ms->smp.cpus, FSL_IMX8MM_NUM_CPUS); i++) { + g_autofree char *name = g_strdup_printf("cpu%d", i); + object_initialize_child(obj, name, &s->cpu[i], cpu_type); + } + + object_initialize_child(obj, "gic", &s->gic, gicv3_class_name()); + + for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) { + g_autofree char *name = g_strdup_printf("uart%d", i + 1); + object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); + } + +} + +static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) +{ + MachineState *ms = MACHINE(qdev_get_machine()); + FslImx8mmState *s = FSL_IMX8MM(dev); + DeviceState *gicdev = DEVICE(&s->gic); + int i; + + if (ms->smp.cpus > FSL_IMX8MM_NUM_CPUS) { + error_setg(errp, "%s: Only %d CPUs are supported (%d requested)", + TYPE_FSL_IMX8MM, FSL_IMX8MM_NUM_CPUS, ms->smp.cpus); + return; + } + + /* CPUs */ + for (i = 0; i < ms->smp.cpus; i++) { + /* On uniprocessor, the CBAR is set to 0 */ + if (ms->smp.cpus > 1 && + object_property_find(OBJECT(&s->cpu[i]), "reset-cbar")) { + object_property_set_int(OBJECT(&s->cpu[i]), "reset-cbar", + fsl_imx8mm_memmap[FSL_IMX8MM_GIC_DIST].addr, + &error_abort); + } + + /* + * CNTFID0 base frequency in Hz of system counter + */ + object_property_set_int(OBJECT(&s->cpu[i]), "cntfrq", 8000000, + &error_abort); + + if (object_property_find(OBJECT(&s->cpu[i]), "has_el2")) { + object_property_set_bool(OBJECT(&s->cpu[i]), "has_el2", + !kvm_enabled(), &error_abort); + } + + if (object_property_find(OBJECT(&s->cpu[i]), "has_el3")) { + object_property_set_bool(OBJECT(&s->cpu[i]), "has_el3", + !kvm_enabled(), &error_abort); + } + + if (i) { + /* + * Secondary CPUs start in powered-down state (and can be + * powered up via the SRC system reset controller) + */ + object_property_set_bool(OBJECT(&s->cpu[i]), "start-powered-off", + true, &error_abort); + } + + if (!qdev_realize(DEVICE(&s->cpu[i]), NULL, errp)) { + return; + } + } + + /* GIC */ + { + SysBusDevice *gicsbd = SYS_BUS_DEVICE(&s->gic); + QList *redist_region_count; + bool pmu = object_property_get_bool(OBJECT(first_cpu), "pmu", NULL); + + qdev_prop_set_uint32(gicdev, "num-cpu", ms->smp.cpus); + qdev_prop_set_uint32(gicdev, "num-irq", + FSL_IMX8MM_NUM_IRQS + GIC_INTERNAL); + redist_region_count = qlist_new(); + qlist_append_int(redist_region_count, ms->smp.cpus); + qdev_prop_set_array(gicdev, "redist-region-count", redist_region_count); + object_property_set_link(OBJECT(&s->gic), "sysmem", + OBJECT(get_system_memory()), &error_fatal); + if (!sysbus_realize(gicsbd, errp)) { + return; + } + sysbus_mmio_map(gicsbd, 0, fsl_imx8mm_memmap[FSL_IMX8MM_GIC_DIST].addr); + sysbus_mmio_map(gicsbd, 1, fsl_imx8mm_memmap[FSL_IMX8MM_GIC_REDIST].addr); + + /* + * Wire the outputs from each CPU's generic timer and the GICv3 + * maintenance interrupt signal to the appropriate GIC PPI inputs, and + * the GIC's IRQ/FIQ interrupt outputs to the CPU's inputs. + */ + for (i = 0; i < ms->smp.cpus; i++) { + DeviceState *cpudev = DEVICE(&s->cpu[i]); + int intidbase = FSL_IMX8MM_NUM_IRQS + i * GIC_INTERNAL; + qemu_irq irq; + + /* + * Mapping from the output timer irq lines from the CPU to the + * GIC PPI inputs. + */ + static const int timer_irqs[] = { + [GTIMER_PHYS] = ARCH_TIMER_NS_EL1_IRQ, + [GTIMER_VIRT] = ARCH_TIMER_VIRT_IRQ, + [GTIMER_HYP] = ARCH_TIMER_NS_EL2_IRQ, + [GTIMER_SEC] = ARCH_TIMER_S_EL1_IRQ, + }; + + for (int j = 0; j < ARRAY_SIZE(timer_irqs); j++) { + irq = qdev_get_gpio_in(gicdev, intidbase + timer_irqs[j]); + qdev_connect_gpio_out(cpudev, j, irq); + } + + irq = qdev_get_gpio_in(gicdev, intidbase + ARCH_GIC_MAINT_IRQ); + qdev_connect_gpio_out_named(cpudev, "gicv3-maintenance-interrupt", + 0, irq); + + irq = qdev_get_gpio_in(gicdev, intidbase + VIRTUAL_PMU_IRQ); + qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0, irq); + + sysbus_connect_irq(gicsbd, i, + qdev_get_gpio_in(cpudev, ARM_CPU_IRQ)); + sysbus_connect_irq(gicsbd, i + ms->smp.cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_FIQ)); + sysbus_connect_irq(gicsbd, i + 2 * ms->smp.cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_VIRQ)); + sysbus_connect_irq(gicsbd, i + 3 * ms->smp.cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ)); + + if (kvm_enabled()) { + if (pmu) { + assert(arm_feature(&s->cpu[i].env, ARM_FEATURE_PMU)); + if (kvm_irqchip_in_kernel()) { + kvm_arm_pmu_set_irq(&s->cpu[i], VIRTUAL_PMU_IRQ); + } + kvm_arm_pmu_init(&s->cpu[i]); + } + } + } + } + + /* UARTs */ + for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) { + static const struct { + hwaddr addr; + unsigned int irq; + } serial_table[FSL_IMX8MM_NUM_UARTS] = { + { fsl_imx8mm_memmap[FSL_IMX8MM_UART1].addr, FSL_IMX8MM_UART1_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_UART2].addr, FSL_IMX8MM_UART2_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_UART3].addr, FSL_IMX8MM_UART3_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_UART4].addr, FSL_IMX8MM_UART4_IRQ }, + }; + + qdev_prop_set_chr(DEVICE(&s->uart[i]), "chardev", serial_hd(i)); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->uart[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->uart[i]), 0, serial_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->uart[i]), 0, + qdev_get_gpio_in(gicdev, serial_table[i].irq)); + } + + /* On-Chip RAM */ + if (!memory_region_init_ram(&s->ocram, OBJECT(dev), "imx8mm.ocram", + fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].size, + errp)) { + return; + } + memory_region_add_subregion(get_system_memory(), + fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr, + &s->ocram); + + /* Unimplemented devices */ + for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) { + switch (i) { + case FSL_IMX8MM_GIC_DIST: + case FSL_IMX8MM_GIC_REDIST: + case FSL_IMX8MM_RAM: + case FSL_IMX8MM_OCRAM: + case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4: + /* device implemented and treated above */ + break; + + default: + create_unimplemented_device(fsl_imx8mm_memmap[i].name, + fsl_imx8mm_memmap[i].addr, + fsl_imx8mm_memmap[i].size); + break; + } + } +} + +static void fsl_imx8mm_class_init(ObjectClass *oc, const void *data) +{ + DeviceClass *dc = DEVICE_CLASS(oc); + + dc->realize = fsl_imx8mm_realize; + + dc->desc = "i.MX 8MM SoC"; +} + +static const TypeInfo fsl_imx8mm_types[] = { + { + .name = TYPE_FSL_IMX8MM, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(FslImx8mmState), + .instance_init = fsl_imx8mm_init, + .class_init = fsl_imx8mm_class_init, + }, +}; + +DEFINE_TYPES(fsl_imx8mm_types) diff --git a/hw/arm/imx8mm-evk.c b/hw/arm/imx8mm-evk.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/imx8mm-evk.c @@ -XXX,XX +XXX,XX @@ +/* + * NXP i.MX 8MM Evaluation Kit System Emulation + * + * Copyright (c) 2025, NXP Semiconductors + * Author: Gaurav Sharma <gaurav.sharma_7@nxp.com> + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#include "qemu/osdep.h" +#include "system/address-spaces.h" +#include "hw/arm/boot.h" +#include "hw/arm/fsl-imx8mm.h" +#include "hw/arm/machines-qom.h" +#include "hw/core/boards.h" +#include "hw/core/qdev-properties.h" +#include "system/kvm.h" +#include "system/qtest.h" +#include "qemu/error-report.h" +#include "qapi/error.h" +#include <libfdt.h> + +static void imx8mm_evk_modify_dtb(const struct arm_boot_info *info, void *fdt) +{ + int i, offset; + + /* Temporarily disable following nodes until they are implemented */ + const char *nodes_to_remove[] = { + "nxp,imx8mm-fspi", + "fsl,imx8mm-mipi-csi", + "fsl,imx8mm-mipi-dsim" + }; + + for (i = 0; i < ARRAY_SIZE(nodes_to_remove); i++) { + const char *dev_str = nodes_to_remove[i]; + + offset = fdt_node_offset_by_compatible(fdt, -1, dev_str); + while (offset >= 0) { + fdt_nop_node(fdt, offset); + offset = fdt_node_offset_by_compatible(fdt, offset, dev_str); + } + } + + /* Remove cpu-idle-states property from CPU nodes */ + offset = fdt_node_offset_by_compatible(fdt, -1, "arm,cortex-a53"); + while (offset >= 0) { + fdt_nop_property(fdt, offset, "cpu-idle-states"); + offset = fdt_node_offset_by_compatible(fdt, offset, "arm,cortex-a53"); + } + + if (kvm_enabled()) { + /* Use system counter frequency from host CPU to fix time in guest */ + offset = fdt_node_offset_by_compatible(fdt, -1, "arm,armv8-timer"); + while (offset >= 0) { + fdt_nop_property(fdt, offset, "clock-frequency"); + offset = fdt_node_offset_by_compatible(fdt, offset, "arm,armv8-timer"); + } + } +} + +static void imx8mm_evk_init(MachineState *machine) +{ + static struct arm_boot_info boot_info; + FslImx8mmState *s; + + if (machine->ram_size > FSL_IMX8MM_RAM_SIZE_MAX) { + error_report("RAM size " RAM_ADDR_FMT " above max supported (%08" PRIx64 ")", + machine->ram_size, FSL_IMX8MM_RAM_SIZE_MAX); + exit(1); + } + + boot_info = (struct arm_boot_info) { + .loader_start = FSL_IMX8MM_RAM_START, + .board_id = -1, + .ram_size = machine->ram_size, + .psci_conduit = QEMU_PSCI_CONDUIT_SMC, + .modify_dtb = imx8mm_evk_modify_dtb, + }; + + s = FSL_IMX8MM(object_new_with_props(TYPE_FSL_IMX8MM, OBJECT(machine), + "soc", &error_fatal, NULL)); + sysbus_realize_and_unref(SYS_BUS_DEVICE(s), &error_fatal); + + memory_region_add_subregion(get_system_memory(), FSL_IMX8MM_RAM_START, + machine->ram); + + if (!qtest_enabled()) { + arm_load_kernel(&s->cpu[0], machine, &boot_info); + } +} + +static const char *imx8mm_evk_get_default_cpu_type(const MachineState *ms) +{ + if (kvm_enabled()) { + return ARM_CPU_TYPE_NAME("host"); + } + + return ARM_CPU_TYPE_NAME("cortex-a53"); +} + +static void imx8mm_evk_machine_init(MachineClass *mc) +{ + mc->desc = "NXP i.MX 8MM EVK Board"; + mc->init = imx8mm_evk_init; + mc->max_cpus = FSL_IMX8MM_NUM_CPUS; + mc->default_cpus = FSL_IMX8MM_NUM_CPUS; + mc->default_ram_size = 2 * GiB; + mc->default_ram_id = "imx8mm-evk.ram"; + mc->get_default_cpu_type = imx8mm_evk_get_default_cpu_type; +} + +DEFINE_MACHINE_AARCH64("imx8mm-evk", imx8mm_evk_machine_init) diff --git a/hw/arm/meson.build b/hw/arm/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/meson.build +++ b/hw/arm/meson.build @@ -XXX,XX +XXX,XX @@ arm_common_ss.add(when: 'CONFIG_ARMSSE', if_true: files('armsse.c')) arm_common_ss.add(when: 'CONFIG_FSL_IMX7', if_true: files('fsl-imx7.c', 'mcimx7d-sabre.c')) arm_common_ss.add(when: 'CONFIG_FSL_IMX8MP', if_true: files('fsl-imx8mp.c')) arm_common_ss.add(when: 'CONFIG_FSL_IMX8MP_EVK', if_true: files('imx8mp-evk.c')) +arm_common_ss.add(when: 'CONFIG_FSL_IMX8MM', if_true: files('fsl-imx8mm.c')) +arm_common_ss.add(when: 'CONFIG_FSL_IMX8MM_EVK', if_true: files('imx8mm-evk.c')) arm_common_ss.add(when: 'CONFIG_ARM_SMMUV3', if_true: files('smmuv3.c')) arm_common_ss.add(when: 'CONFIG_ARM_SMMUV3_ACCEL', if_true: files('smmuv3-accel.c')) stub_ss.add(files('smmuv3-accel-stubs.c')) diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ +/* + * i.MX 8MM SoC Definitions + * + * Copyright (c) 2025, NXP Semiconductors + * Author: Gaurav Sharma <gaurav.sharma_7@nxp.com> + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#ifndef FSL_IMX8MM_H +#define FSL_IMX8MM_H + +#include "cpu.h" +#include "hw/char/imx_serial.h" +#include "hw/intc/arm_gicv3_common.h" +#include "qom/object.h" +#include "qemu/units.h" + +#define TYPE_FSL_IMX8MM "fsl-imx8mm" +OBJECT_DECLARE_SIMPLE_TYPE(FslImx8mmState, FSL_IMX8MM) + +#define FSL_IMX8MM_RAM_START 0x40000000 +#define FSL_IMX8MM_RAM_SIZE_MAX (4 * GiB) + +enum FslImx8mmConfiguration { + FSL_IMX8MM_NUM_CPUS = 4, + FSL_IMX8MM_NUM_IRQS = 128, + FSL_IMX8MM_NUM_UARTS = 4, +}; + +struct FslImx8mmState { + SysBusDevice parent_obj; + + ARMCPU cpu[FSL_IMX8MM_NUM_CPUS]; + GICv3State gic; + IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; + MemoryRegion ocram; +}; + +enum FslImx8mmMemoryRegions { + FSL_IMX8MM_A53_DAP, + FSL_IMX8MM_AIPS1_CONFIGURATION, + FSL_IMX8MM_AIPS2_CONFIGURATION, + FSL_IMX8MM_AIPS3_CONFIGURATION, + FSL_IMX8MM_AIPS4_CONFIGURATION, + FSL_IMX8MM_ANA_OSC, + FSL_IMX8MM_ANA_PLL, + FSL_IMX8MM_ANA_TSENSOR, + FSL_IMX8MM_APBH_DMA, + FSL_IMX8MM_BOOT_ROM, + FSL_IMX8MM_BOOT_ROM_PROTECTED, + FSL_IMX8MM_CAAM, + FSL_IMX8MM_CAAM_MEM, + FSL_IMX8MM_CCM, + FSL_IMX8MM_CSU, + FSL_IMX8MM_DDR_CTL, + FSL_IMX8MM_DDR_PERF_MON, + FSL_IMX8MM_DDR_PHY, + FSL_IMX8MM_DDR_PHY_BROADCAST, + FSL_IMX8MM_ECSPI1, + FSL_IMX8MM_ECSPI2, + FSL_IMX8MM_ECSPI3, + FSL_IMX8MM_ENET1, + FSL_IMX8MM_GIC_DIST, + FSL_IMX8MM_GIC_REDIST, + FSL_IMX8MM_GPC, + FSL_IMX8MM_GPIO1, + FSL_IMX8MM_GPIO2, + FSL_IMX8MM_GPIO3, + FSL_IMX8MM_GPIO4, + FSL_IMX8MM_GPIO5, + FSL_IMX8MM_GPT1, + FSL_IMX8MM_GPT2, + FSL_IMX8MM_GPT3, + FSL_IMX8MM_GPT4, + FSL_IMX8MM_GPT5, + FSL_IMX8MM_GPT6, + FSL_IMX8MM_GPU2D, + FSL_IMX8MM_I2C1, + FSL_IMX8MM_I2C2, + FSL_IMX8MM_I2C3, + FSL_IMX8MM_I2C4, + FSL_IMX8MM_INTERCONNECT, + FSL_IMX8MM_IOMUXC, + FSL_IMX8MM_IOMUXC_GPR, + FSL_IMX8MM_MEDIA_BLK_CTL, + FSL_IMX8MM_LCDIF, + FSL_IMX8MM_MIPI_CSI, + FSL_IMX8MM_MIPI_DSI, + FSL_IMX8MM_MU_A, + FSL_IMX8MM_MU_B, + FSL_IMX8MM_OCOTP_CTRL, + FSL_IMX8MM_OCRAM, + FSL_IMX8MM_OCRAM_S, + FSL_IMX8MM_PCIE1, + FSL_IMX8MM_PCIE1_MEM, + FSL_IMX8MM_PCIE_PHY1, + FSL_IMX8MM_PERFMON1, + FSL_IMX8MM_PERFMON2, + FSL_IMX8MM_PWM1, + FSL_IMX8MM_PWM2, + FSL_IMX8MM_PWM3, + FSL_IMX8MM_PWM4, + FSL_IMX8MM_QOSC, + FSL_IMX8MM_QSPI, + FSL_IMX8MM_QSPI1_RX_BUFFER, + FSL_IMX8MM_QSPI1_TX_BUFFER, + FSL_IMX8MM_QSPI_MEM, + FSL_IMX8MM_RAM, + FSL_IMX8MM_RDC, + FSL_IMX8MM_SAI1, + FSL_IMX8MM_SAI2, + FSL_IMX8MM_SAI3, + FSL_IMX8MM_SAI5, + FSL_IMX8MM_SAI6, + FSL_IMX8MM_SDMA1, + FSL_IMX8MM_SDMA2, + FSL_IMX8MM_SDMA3, + FSL_IMX8MM_SEMAPHORE1, + FSL_IMX8MM_SEMAPHORE2, + FSL_IMX8MM_SEMAPHORE_HS, + FSL_IMX8MM_SNVS_HP, + FSL_IMX8MM_SPBA1, + FSL_IMX8MM_SRC, + FSL_IMX8MM_SYSCNT_CMP, + FSL_IMX8MM_SYSCNT_CTRL, + FSL_IMX8MM_SYSCNT_RD, + FSL_IMX8MM_TCM_DTCM, + FSL_IMX8MM_TCM_ITCM, + FSL_IMX8MM_TZASC, + FSL_IMX8MM_UART1, + FSL_IMX8MM_UART2, + FSL_IMX8MM_UART3, + FSL_IMX8MM_UART4, + FSL_IMX8MM_USB1, + FSL_IMX8MM_USB2, + FSL_IMX8MM_USB1_OTG, + FSL_IMX8MM_USB2_OTG, + FSL_IMX8MM_USDHC1, + FSL_IMX8MM_USDHC2, + FSL_IMX8MM_USDHC3, + FSL_IMX8MM_VPU, + FSL_IMX8MM_VPU_BLK_CTRL, + FSL_IMX8MM_VPU_G1_DECODER, + FSL_IMX8MM_VPU_G2_DECODER, + FSL_IMX8MM_WDOG1, + FSL_IMX8MM_WDOG2, + FSL_IMX8MM_WDOG3, +}; + +enum FslImx8mmIrqs { + FSL_IMX8MM_UART1_IRQ = 26, + FSL_IMX8MM_UART2_IRQ = 27, + FSL_IMX8MM_UART3_IRQ = 28, + FSL_IMX8MM_UART4_IRQ = 29, +}; + +#endif /* FSL_IMX8MM_H */ -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> Add configurable properties for register reset values that differ between i.MX 8M variants (Plus, Mini, etc.). This allows the same device implementation to be shared across multiple SoCs. Properties added: - arm-pll-fdiv-ctl0-reset: ARM PLL divider control reset value Default value is set to match i.MX 8MP reset value (0x000FA031). This can be overridden in the variant like iMX8MM with its own reset value. Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/imx8mp_analog.c | 12 +++++++++++- include/hw/misc/imx8mp_analog.h | 3 +++ 2 files changed, 14 insertions(+), 1 deletion(-) diff --git a/hw/misc/imx8mp_analog.c b/hw/misc/imx8mp_analog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/imx8mp_analog.c +++ b/hw/misc/imx8mp_analog.c @@ -XXX,XX +XXX,XX @@ #include "qemu/log.h" #include "hw/misc/imx8mp_analog.h" +#include "hw/core/qdev-properties.h" #include "migration/vmstate.h" #define ANALOG_PLL_LOCK BIT(31) @@ -XXX,XX +XXX,XX @@ static void imx8mp_analog_reset(DeviceState *dev) s->analog[ANALOG_VPU_PLL_LOCKD_CTRL] = 0x0010003f; s->analog[ANALOG_VPU_PLL_MNIT_CTRL] = 0x00280081; s->analog[ANALOG_ARM_PLL_GEN_CTRL] = 0x00000810; - s->analog[ANALOG_ARM_PLL_FDIV_CTL0] = 0x000fa031; + + /* Use property value instead of hardcoded */ + s->analog[ANALOG_ARM_PLL_FDIV_CTL0] = s->arm_pll_fdiv_ctl0_reset; + s->analog[ANALOG_ARM_PLL_LOCKD_CTRL] = 0x0010003f; s->analog[ANALOG_ARM_PLL_MNIT_CTRL] = 0x00280081; s->analog[ANALOG_SYS_PLL1_GEN_CTRL] = 0x0aaaa810; @@ -XXX,XX +XXX,XX @@ static const VMStateDescription imx8mp_analog_vmstate = { }, }; +static const Property imx8mp_analog_properties[] = { + DEFINE_PROP_UINT32("arm-pll-fdiv-ctl0-reset", IMX8MPAnalogState, + arm_pll_fdiv_ctl0_reset, 0x000fa031), /* imx8mp default */ +}; + static void imx8mp_analog_class_init(ObjectClass *klass, const void *data) { DeviceClass *dc = DEVICE_CLASS(klass); device_class_set_legacy_reset(dc, imx8mp_analog_reset); + device_class_set_props(dc, imx8mp_analog_properties); dc->vmsd = &imx8mp_analog_vmstate; dc->desc = "i.MX 8M Plus Analog Module"; } diff --git a/include/hw/misc/imx8mp_analog.h b/include/hw/misc/imx8mp_analog.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/imx8mp_analog.h +++ b/include/hw/misc/imx8mp_analog.h @@ -XXX,XX +XXX,XX @@ struct IMX8MPAnalogState { } mmio; uint32_t analog[ANALOG_MAX]; + + /* Property for variant-specific reset values */ + uint32_t arm_pll_fdiv_ctl0_reset; }; #endif /* IMX8MP_ANALOG_H */ -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> Add the Analog IP to i.MX8MM SoC. iMX8MM and i.MX8MP uses the same Analog IP so the analog ip source will be shared. The ARM PLL divider control register (arm-pll-fdiv-ctl0) has a different reset value on i.MX8MM (0x000fa030) compared to i.MX8MP (0x000fa031). So iMX8MM will be overriding this property with its own reset-value. Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx8mm.c | 12 ++++++++++++ include/hw/arm/fsl-imx8mm.h | 2 ++ 3 files changed, 15 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MP_EVK config FSL_IMX8MM bool select ARM_GIC + select FSL_IMX8MP_ANALOG select IMX config FSL_IMX8MM_EVK diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, "gic", &s->gic, gicv3_class_name()); + object_initialize_child(obj, "analog", &s->analog, TYPE_IMX8MP_ANALOG); + for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) { g_autofree char *name = g_strdup_printf("uart%d", i + 1); object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) } } + /* Analog */ + object_property_set_uint(OBJECT(&s->analog), "arm-pll-fdiv-ctl0-reset", + 0x000fa030, &error_abort); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->analog), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->analog), 0, + fsl_imx8mm_memmap[FSL_IMX8MM_ANA_PLL].addr); + /* UARTs */ for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) { static const struct { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) /* Unimplemented devices */ for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) { switch (i) { + case FSL_IMX8MM_ANA_PLL: case FSL_IMX8MM_GIC_DIST: case FSL_IMX8MM_GIC_REDIST: case FSL_IMX8MM_RAM: diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "hw/char/imx_serial.h" #include "hw/intc/arm_gicv3_common.h" +#include "hw/misc/imx8mp_analog.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { ARMCPU cpu[FSL_IMX8MM_NUM_CPUS]; GICv3State gic; + IMX8MPAnalogState analog; IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; }; -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> Add the Clock Control Module (CCM) device to i.MX8MM SoC. The CCM implementation is shared with i.MX8MP as the register layout is identical between the two variants.Hence iMX8MM will be using the source of iMX8MP CCM. Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx8mm.c | 10 ++++++++++ include/hw/arm/fsl-imx8mm.h | 2 ++ 3 files changed, 13 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM bool select ARM_GIC select FSL_IMX8MP_ANALOG + select FSL_IMX8MP_CCM select IMX config FSL_IMX8MM_EVK diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, "gic", &s->gic, gicv3_class_name()); + object_initialize_child(obj, "ccm", &s->ccm, TYPE_IMX8MP_CCM); + object_initialize_child(obj, "analog", &s->analog, TYPE_IMX8MP_ANALOG); for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) } } + /* CCM */ + if (!sysbus_realize(SYS_BUS_DEVICE(&s->ccm), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->ccm), 0, + fsl_imx8mm_memmap[FSL_IMX8MM_CCM].addr); + /* Analog */ object_property_set_uint(OBJECT(&s->analog), "arm-pll-fdiv-ctl0-reset", 0x000fa030, &error_abort); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) { switch (i) { case FSL_IMX8MM_ANA_PLL: + case FSL_IMX8MM_CCM: case FSL_IMX8MM_GIC_DIST: case FSL_IMX8MM_GIC_REDIST: case FSL_IMX8MM_RAM: diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/char/imx_serial.h" #include "hw/intc/arm_gicv3_common.h" #include "hw/misc/imx8mp_analog.h" +#include "hw/misc/imx8mp_ccm.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { ARMCPU cpu[FSL_IMX8MM_NUM_CPUS]; GICv3State gic; + IMX8MPCCMState ccm; IMX8MPAnalogState analog; IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> SNVS contains an RTC which allows Linux to deal correctly with time Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/fsl-imx8mm.c | 10 ++++++++++ include/hw/arm/fsl-imx8mm.h | 2 ++ 2 files changed, 12 insertions(+) diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, "analog", &s->analog, TYPE_IMX8MP_ANALOG); + object_initialize_child(obj, "snvs", &s->snvs, TYPE_IMX7_SNVS); + for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) { g_autofree char *name = g_strdup_printf("uart%d", i + 1); object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr, &s->ocram); + /* SNVS */ + if (!sysbus_realize(SYS_BUS_DEVICE(&s->snvs), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, + fsl_imx8mm_memmap[FSL_IMX8MM_SNVS_HP].addr); + /* Unimplemented devices */ for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) { switch (i) { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_GIC_REDIST: case FSL_IMX8MM_RAM: case FSL_IMX8MM_OCRAM: + case FSL_IMX8MM_SNVS_HP: case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4: /* device implemented and treated above */ break; diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "hw/char/imx_serial.h" #include "hw/intc/arm_gicv3_common.h" +#include "hw/misc/imx7_snvs.h" #include "hw/misc/imx8mp_analog.h" #include "hw/misc/imx8mp_ccm.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { GICv3State gic; IMX8MPCCMState ccm; IMX8MPAnalogState analog; + IMX7SNVSState snvs; IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; }; -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> It enables emulation of SD/MMC cards through a virtual SDHCI interface The emulated SDHCI controller allows guest OS to use emulated storage as a standard block device. This will allow running the images such as those generated by Buildroot. Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx8mm.c | 25 +++++++++++++++++++++++++ hw/arm/imx8mm-evk.c | 17 +++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 7 +++++++ 4 files changed, 50 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM select FSL_IMX8MP_ANALOG select FSL_IMX8MP_CCM select IMX + select SDHCI config FSL_IMX8MM_EVK bool diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); } + for (i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) { + g_autofree char *name = g_strdup_printf("usdhc%d", i + 1); + object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC); + } } static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr, &s->ocram); + /* USDHCs */ + for (i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) { + static const struct { + hwaddr addr; + unsigned int irq; + } usdhc_table[FSL_IMX8MM_NUM_USDHCS] = { + { fsl_imx8mm_memmap[FSL_IMX8MM_USDHC1].addr, FSL_IMX8MM_USDHC1_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_USDHC2].addr, FSL_IMX8MM_USDHC2_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_USDHC3].addr, FSL_IMX8MM_USDHC3_IRQ }, + }; + + if (!sysbus_realize(SYS_BUS_DEVICE(&s->usdhc[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->usdhc[i]), 0, usdhc_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->usdhc[i]), 0, + qdev_get_gpio_in(gicdev, usdhc_table[i].irq)); + } + /* SNVS */ if (!sysbus_realize(SYS_BUS_DEVICE(&s->snvs), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_OCRAM: case FSL_IMX8MM_SNVS_HP: case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4: + case FSL_IMX8MM_USDHC1 ... FSL_IMX8MM_USDHC3: /* device implemented and treated above */ break; diff --git a/hw/arm/imx8mm-evk.c b/hw/arm/imx8mm-evk.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/imx8mm-evk.c +++ b/hw/arm/imx8mm-evk.c @@ -XXX,XX +XXX,XX @@ static void imx8mm_evk_init(MachineState *machine) memory_region_add_subregion(get_system_memory(), FSL_IMX8MM_RAM_START, machine->ram); + for (int i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) { + BusState *bus; + DeviceState *carddev; + BlockBackend *blk; + DriveInfo *di = drive_get(IF_SD, i, 0); + + if (!di) { + continue; + } + + blk = blk_by_legacy_dinfo(di); + bus = qdev_get_child_bus(DEVICE(&s->usdhc[i]), "sd-bus"); + carddev = qdev_new(TYPE_SD_CARD); + qdev_prop_set_drive_err(carddev, "drive", blk, &error_fatal); + qdev_realize_and_unref(carddev, bus, &error_fatal); + } + if (!qtest_enabled()) { arm_load_kernel(&s->cpu[0], machine, &boot_info); } diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx8mp_analog.h" #include "hw/misc/imx8mp_ccm.h" +#include "hw/sd/sdhci.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ enum FslImx8mmConfiguration { FSL_IMX8MM_NUM_CPUS = 4, FSL_IMX8MM_NUM_IRQS = 128, FSL_IMX8MM_NUM_UARTS = 4, + FSL_IMX8MM_NUM_USDHCS = 3, }; struct FslImx8mmState { @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMX7SNVSState snvs; IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; + SDHCIState usdhc[FSL_IMX8MM_NUM_USDHCS]; }; enum FslImx8mmMemoryRegions { @@ -XXX,XX +XXX,XX @@ enum FslImx8mmMemoryRegions { }; enum FslImx8mmIrqs { + FSL_IMX8MM_USDHC1_IRQ = 22, + FSL_IMX8MM_USDHC2_IRQ = 23, + FSL_IMX8MM_USDHC3_IRQ = 24, + FSL_IMX8MM_UART1_IRQ = 26, FSL_IMX8MM_UART2_IRQ = 27, FSL_IMX8MM_UART3_IRQ = 28, -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> This enables support for Designware PCI Express Controller emulation It provides a controlled environment to debug the linux pci subsystem Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 3 +++ hw/arm/fsl-imx8mm.c | 30 ++++++++++++++++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 10 ++++++++++ 3 files changed, 43 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MP_EVK config FSL_IMX8MM bool + imply PCI_DEVICES select ARM_GIC select FSL_IMX8MP_ANALOG select FSL_IMX8MP_CCM select IMX select SDHCI + select PCI_EXPRESS_DESIGNWARE + select PCI_EXPRESS_FSL_IMX8M_PHY config FSL_IMX8MM_EVK bool diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) g_autofree char *name = g_strdup_printf("usdhc%d", i + 1); object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC); } + + object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST); + object_initialize_child(obj, "pcie_phy", &s->pcie_phy, + TYPE_FSL_IMX8M_PCIE_PHY); } static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, fsl_imx8mm_memmap[FSL_IMX8MM_SNVS_HP].addr); + /* PCIe */ + if (!sysbus_realize(SYS_BUS_DEVICE(&s->pcie), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->pcie), 0, + fsl_imx8mm_memmap[FSL_IMX8MM_PCIE1].addr); + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 0, + qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_INTA_IRQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 1, + qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_INTB_IRQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 2, + qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_INTC_IRQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 3, + qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_INTD_IRQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 4, + qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_MSI_IRQ)); + + if (!sysbus_realize(SYS_BUS_DEVICE(&s->pcie_phy), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->pcie_phy), 0, + fsl_imx8mm_memmap[FSL_IMX8MM_PCIE_PHY1].addr); + /* Unimplemented devices */ for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) { switch (i) { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_CCM: case FSL_IMX8MM_GIC_DIST: case FSL_IMX8MM_GIC_REDIST: + case FSL_IMX8MM_PCIE1: + case FSL_IMX8MM_PCIE_PHY1: case FSL_IMX8MM_RAM: case FSL_IMX8MM_OCRAM: case FSL_IMX8MM_SNVS_HP: diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx8mp_analog.h" #include "hw/misc/imx8mp_ccm.h" +#include "hw/pci-host/designware.h" +#include "hw/pci-host/fsl_imx8m_phy.h" #include "hw/sd/sdhci.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; SDHCIState usdhc[FSL_IMX8MM_NUM_USDHCS]; + DesignwarePCIEHost pcie; + FslImx8mPciePhyState pcie_phy; }; enum FslImx8mmMemoryRegions { @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_UART2_IRQ = 27, FSL_IMX8MM_UART3_IRQ = 28, FSL_IMX8MM_UART4_IRQ = 29, + + FSL_IMX8MM_PCI_INTA_IRQ = 122, + FSL_IMX8MM_PCI_INTB_IRQ = 123, + FSL_IMX8MM_PCI_INTC_IRQ = 124, + FSL_IMX8MM_PCI_INTD_IRQ = 125, + FSL_IMX8MM_PCI_MSI_IRQ = 127, }; #endif /* FSL_IMX8MM_H */ -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> Enabled GPIO controller emulation Also updated the GPIO IRQ lines of iMX8MM Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/fsl-imx8mm.c | 54 +++++++++++++++++++++++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 14 ++++++++++ 2 files changed, 68 insertions(+) diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); } + for (i = 0; i < FSL_IMX8MM_NUM_GPIOS; i++) { + g_autofree char *name = g_strdup_printf("gpio%d", i + 1); + object_initialize_child(obj, name, &s->gpio[i], TYPE_IMX_GPIO); + } + for (i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) { g_autofree char *name = g_strdup_printf("usdhc%d", i + 1); object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr, &s->ocram); + /* GPIOs */ + for (i = 0; i < FSL_IMX8MM_NUM_GPIOS; i++) { + static const struct { + hwaddr addr; + unsigned int irq_low; + unsigned int irq_high; + } gpio_table[FSL_IMX8MM_NUM_GPIOS] = { + { + fsl_imx8mm_memmap[FSL_IMX8MM_GPIO1].addr, + FSL_IMX8MM_GPIO1_LOW_IRQ, + FSL_IMX8MM_GPIO1_HIGH_IRQ + }, + { + fsl_imx8mm_memmap[FSL_IMX8MM_GPIO2].addr, + FSL_IMX8MM_GPIO2_LOW_IRQ, + FSL_IMX8MM_GPIO2_HIGH_IRQ + }, + { + fsl_imx8mm_memmap[FSL_IMX8MM_GPIO3].addr, + FSL_IMX8MM_GPIO3_LOW_IRQ, + FSL_IMX8MM_GPIO3_HIGH_IRQ + }, + { + fsl_imx8mm_memmap[FSL_IMX8MM_GPIO4].addr, + FSL_IMX8MM_GPIO4_LOW_IRQ, + FSL_IMX8MM_GPIO4_HIGH_IRQ + }, + { + fsl_imx8mm_memmap[FSL_IMX8MM_GPIO5].addr, + FSL_IMX8MM_GPIO5_LOW_IRQ, + FSL_IMX8MM_GPIO5_HIGH_IRQ + }, + }; + object_property_set_bool(OBJECT(&s->gpio[i]), "has-edge-sel", true, + &error_abort); + object_property_set_bool(OBJECT(&s->gpio[i]), "has-upper-pin-irq", + true, &error_abort); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpio[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio[i]), 0, gpio_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 0, + qdev_get_gpio_in(gicdev, gpio_table[i].irq_low)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 1, + qdev_get_gpio_in(gicdev, gpio_table[i].irq_high)); + } + /* USDHCs */ for (i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) { static const struct { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_CCM: case FSL_IMX8MM_GIC_DIST: case FSL_IMX8MM_GIC_REDIST: + case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5: case FSL_IMX8MM_PCIE1: case FSL_IMX8MM_PCIE_PHY1: case FSL_IMX8MM_RAM: diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "hw/char/imx_serial.h" +#include "hw/gpio/imx_gpio.h" #include "hw/intc/arm_gicv3_common.h" #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx8mp_analog.h" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(FslImx8mmState, FSL_IMX8MM) enum FslImx8mmConfiguration { FSL_IMX8MM_NUM_CPUS = 4, + FSL_IMX8MM_NUM_GPIOS = 5, FSL_IMX8MM_NUM_IRQS = 128, FSL_IMX8MM_NUM_UARTS = 4, FSL_IMX8MM_NUM_USDHCS = 3, @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { ARMCPU cpu[FSL_IMX8MM_NUM_CPUS]; GICv3State gic; + IMXGPIOState gpio[FSL_IMX8MM_NUM_GPIOS]; IMX8MPCCMState ccm; IMX8MPAnalogState analog; IMX7SNVSState snvs; @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_UART3_IRQ = 28, FSL_IMX8MM_UART4_IRQ = 29, + FSL_IMX8MM_GPIO1_LOW_IRQ = 64, + FSL_IMX8MM_GPIO1_HIGH_IRQ = 65, + FSL_IMX8MM_GPIO2_LOW_IRQ = 66, + FSL_IMX8MM_GPIO2_HIGH_IRQ = 67, + FSL_IMX8MM_GPIO3_LOW_IRQ = 68, + FSL_IMX8MM_GPIO3_HIGH_IRQ = 69, + FSL_IMX8MM_GPIO4_LOW_IRQ = 70, + FSL_IMX8MM_GPIO4_HIGH_IRQ = 71, + FSL_IMX8MM_GPIO5_LOW_IRQ = 72, + FSL_IMX8MM_GPIO5_HIGH_IRQ = 73, + FSL_IMX8MM_PCI_INTA_IRQ = 122, FSL_IMX8MM_PCI_INTB_IRQ = 123, FSL_IMX8MM_PCI_INTC_IRQ = 124, -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> This can be used to test and debug I2C device drivers. Added I2C interrupts Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 2 ++ hw/arm/fsl-imx8mm.c | 27 +++++++++++++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 8 ++++++++ 3 files changed, 37 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MP_EVK config FSL_IMX8MM bool imply PCI_DEVICES + imply I2C_DEVICES select ARM_GIC select FSL_IMX8MP_ANALOG select FSL_IMX8MP_CCM select IMX + select IMX_I2C select SDHCI select PCI_EXPRESS_DESIGNWARE select PCI_EXPRESS_FSL_IMX8M_PHY diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); } + for (i = 0; i < FSL_IMX8MM_NUM_I2CS; i++) { + g_autofree char *name = g_strdup_printf("i2c%d", i + 1); + object_initialize_child(obj, name, &s->i2c[i], TYPE_IMX_I2C); + } + for (i = 0; i < FSL_IMX8MM_NUM_GPIOS; i++) { g_autofree char *name = g_strdup_printf("gpio%d", i + 1); object_initialize_child(obj, name, &s->gpio[i], TYPE_IMX_GPIO); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr, &s->ocram); + /* I2Cs */ + for (i = 0; i < FSL_IMX8MM_NUM_I2CS; i++) { + static const struct { + hwaddr addr; + unsigned int irq; + } i2c_table[FSL_IMX8MM_NUM_I2CS] = { + { fsl_imx8mm_memmap[FSL_IMX8MM_I2C1].addr, FSL_IMX8MM_I2C1_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_I2C2].addr, FSL_IMX8MM_I2C2_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_I2C3].addr, FSL_IMX8MM_I2C3_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_I2C4].addr, FSL_IMX8MM_I2C4_IRQ }, + }; + + if (!sysbus_realize(SYS_BUS_DEVICE(&s->i2c[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c[i]), 0, i2c_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c[i]), 0, + qdev_get_gpio_in(gicdev, i2c_table[i].irq)); + } + /* GPIOs */ for (i = 0; i < FSL_IMX8MM_NUM_GPIOS; i++) { static const struct { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_GIC_DIST: case FSL_IMX8MM_GIC_REDIST: case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5: + case FSL_IMX8MM_I2C1 ... FSL_IMX8MM_I2C4: case FSL_IMX8MM_PCIE1: case FSL_IMX8MM_PCIE_PHY1: case FSL_IMX8MM_RAM: diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "hw/char/imx_serial.h" #include "hw/gpio/imx_gpio.h" +#include "hw/i2c/imx_i2c.h" #include "hw/intc/arm_gicv3_common.h" #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx8mp_analog.h" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(FslImx8mmState, FSL_IMX8MM) enum FslImx8mmConfiguration { FSL_IMX8MM_NUM_CPUS = 4, FSL_IMX8MM_NUM_GPIOS = 5, + FSL_IMX8MM_NUM_I2CS = 4, FSL_IMX8MM_NUM_IRQS = 128, FSL_IMX8MM_NUM_UARTS = 4, FSL_IMX8MM_NUM_USDHCS = 3, @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMX8MPCCMState ccm; IMX8MPAnalogState analog; IMX7SNVSState snvs; + IMXI2CState i2c[FSL_IMX8MM_NUM_I2CS]; IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; SDHCIState usdhc[FSL_IMX8MM_NUM_USDHCS]; @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_UART3_IRQ = 28, FSL_IMX8MM_UART4_IRQ = 29, + FSL_IMX8MM_I2C1_IRQ = 35, + FSL_IMX8MM_I2C2_IRQ = 36, + FSL_IMX8MM_I2C3_IRQ = 37, + FSL_IMX8MM_I2C4_IRQ = 38, + FSL_IMX8MM_GPIO1_LOW_IRQ = 64, FSL_IMX8MM_GPIO1_HIGH_IRQ = 65, FSL_IMX8MM_GPIO2_LOW_IRQ = 66, -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> It enables emulation of ECSPI in iMX8MM Added SPI IRQ lines Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/fsl-imx8mm.c | 26 ++++++++++++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 7 +++++++ 2 files changed, 33 insertions(+) diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC); } + for (i = 0; i < FSL_IMX8MM_NUM_ECSPIS; i++) { + g_autofree char *name = g_strdup_printf("spi%d", i + 1); + object_initialize_child(obj, name, &s->spi[i], TYPE_IMX_SPI); + } + object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST); object_initialize_child(obj, "pcie_phy", &s->pcie_phy, TYPE_FSL_IMX8M_PCIE_PHY); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) qdev_get_gpio_in(gicdev, usdhc_table[i].irq)); } + /* ECSPIs */ + for (i = 0; i < FSL_IMX8MM_NUM_ECSPIS; i++) { + static const struct { + hwaddr addr; + unsigned int irq; + } spi_table[FSL_IMX8MM_NUM_ECSPIS] = { + { fsl_imx8mm_memmap[FSL_IMX8MM_ECSPI1].addr, FSL_IMX8MM_ECSPI1_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_ECSPI2].addr, FSL_IMX8MM_ECSPI2_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_ECSPI3].addr, FSL_IMX8MM_ECSPI3_IRQ }, + }; + + if (!sysbus_realize(SYS_BUS_DEVICE(&s->spi[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0, spi_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0, + qdev_get_gpio_in(gicdev, spi_table[i].irq)); + } + /* SNVS */ if (!sysbus_realize(SYS_BUS_DEVICE(&s->snvs), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_GIC_DIST: case FSL_IMX8MM_GIC_REDIST: case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5: + case FSL_IMX8MM_ECSPI1 ... FSL_IMX8MM_ECSPI3: case FSL_IMX8MM_I2C1 ... FSL_IMX8MM_I2C4: case FSL_IMX8MM_PCIE1: case FSL_IMX8MM_PCIE_PHY1: diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/pci-host/designware.h" #include "hw/pci-host/fsl_imx8m_phy.h" #include "hw/sd/sdhci.h" +#include "hw/ssi/imx_spi.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(FslImx8mmState, FSL_IMX8MM) enum FslImx8mmConfiguration { FSL_IMX8MM_NUM_CPUS = 4, + FSL_IMX8MM_NUM_ECSPIS = 3, FSL_IMX8MM_NUM_GPIOS = 5, FSL_IMX8MM_NUM_I2CS = 4, FSL_IMX8MM_NUM_IRQS = 128, @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMX8MPCCMState ccm; IMX8MPAnalogState analog; IMX7SNVSState snvs; + IMXSPIState spi[FSL_IMX8MM_NUM_ECSPIS]; IMXI2CState i2c[FSL_IMX8MM_NUM_I2CS]; IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_UART3_IRQ = 28, FSL_IMX8MM_UART4_IRQ = 29, + FSL_IMX8MM_ECSPI1_IRQ = 31, + FSL_IMX8MM_ECSPI2_IRQ = 32, + FSL_IMX8MM_ECSPI3_IRQ = 33, + FSL_IMX8MM_I2C1_IRQ = 35, FSL_IMX8MM_I2C2_IRQ = 36, FSL_IMX8MM_I2C3_IRQ = 37, -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> It enables emulation of WDT in iMX8MM Added WDT IRQ lines Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx8mm.c | 28 ++++++++++++++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 7 +++++++ 3 files changed, 36 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM select SDHCI select PCI_EXPRESS_DESIGNWARE select PCI_EXPRESS_FSL_IMX8M_PHY + select WDT_IMX2 config FSL_IMX8MM_EVK bool diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->spi[i], TYPE_IMX_SPI); } + for (i = 0; i < FSL_IMX8MM_NUM_WDTS; i++) { + g_autofree char *name = g_strdup_printf("wdt%d", i); + object_initialize_child(obj, name, &s->wdt[i], TYPE_IMX2_WDT); + } + object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST); object_initialize_child(obj, "pcie_phy", &s->pcie_phy, TYPE_FSL_IMX8M_PCIE_PHY); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, fsl_imx8mm_memmap[FSL_IMX8MM_SNVS_HP].addr); + /* Watchdogs */ + for (i = 0; i < FSL_IMX8MM_NUM_WDTS; i++) { + static const struct { + hwaddr addr; + unsigned int irq; + } wdog_table[FSL_IMX8MM_NUM_WDTS] = { + { fsl_imx8mm_memmap[FSL_IMX8MM_WDOG1].addr, FSL_IMX8MM_WDOG1_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_WDOG2].addr, FSL_IMX8MM_WDOG2_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_WDOG3].addr, FSL_IMX8MM_WDOG3_IRQ }, + }; + + object_property_set_bool(OBJECT(&s->wdt[i]), "pretimeout-support", + true, &error_abort); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->wdt[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[i]), 0, wdog_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->wdt[i]), 0, + qdev_get_gpio_in(gicdev, wdog_table[i].irq)); + } + /* PCIe */ if (!sysbus_realize(SYS_BUS_DEVICE(&s->pcie), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_SNVS_HP: case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4: case FSL_IMX8MM_USDHC1 ... FSL_IMX8MM_USDHC3: + case FSL_IMX8MM_WDOG1 ... FSL_IMX8MM_WDOG3: /* device implemented and treated above */ break; diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/pci-host/fsl_imx8m_phy.h" #include "hw/sd/sdhci.h" #include "hw/ssi/imx_spi.h" +#include "hw/watchdog/wdt_imx2.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ enum FslImx8mmConfiguration { FSL_IMX8MM_NUM_IRQS = 128, FSL_IMX8MM_NUM_UARTS = 4, FSL_IMX8MM_NUM_USDHCS = 3, + FSL_IMX8MM_NUM_WDTS = 3, }; struct FslImx8mmState { @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; SDHCIState usdhc[FSL_IMX8MM_NUM_USDHCS]; + IMX2WdtState wdt[FSL_IMX8MM_NUM_WDTS]; DesignwarePCIEHost pcie; FslImx8mPciePhyState pcie_phy; }; @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_GPIO5_LOW_IRQ = 72, FSL_IMX8MM_GPIO5_HIGH_IRQ = 73, + FSL_IMX8MM_WDOG1_IRQ = 78, + FSL_IMX8MM_WDOG2_IRQ = 79, + FSL_IMX8MM_WDOG3_IRQ = 10, + FSL_IMX8MM_PCI_INTA_IRQ = 122, FSL_IMX8MM_PCI_INTB_IRQ = 123, FSL_IMX8MM_PCI_INTC_IRQ = 124, -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> It enables emulation of GPT in iMX8MM Added GPT IRQ lines Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx8mm.c | 54 +++++++++++++++++++++++++++++++++++++ hw/timer/imx_gpt.c | 26 ++++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 11 ++++++++ include/hw/timer/imx_gpt.h | 2 ++ 5 files changed, 94 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM select FSL_IMX8MP_CCM select IMX select IMX_I2C + select OR_IRQ select SDHCI select PCI_EXPRESS_DESIGNWARE select PCI_EXPRESS_FSL_IMX8M_PHY diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); } + for (i = 0; i < FSL_IMX8MM_NUM_GPTS; i++) { + g_autofree char *name = g_strdup_printf("gpt%d", i + 1); + object_initialize_child(obj, name, &s->gpt[i], TYPE_IMX8MM_GPT); + } + object_initialize_child(obj, "gpt5-gpt6-irq", &s->gpt5_gpt6_irq, + TYPE_OR_IRQ); + for (i = 0; i < FSL_IMX8MM_NUM_I2CS; i++) { g_autofree char *name = g_strdup_printf("i2c%d", i + 1); object_initialize_child(obj, name, &s->i2c[i], TYPE_IMX_I2C); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr, &s->ocram); + /* GPTs */ + object_property_set_int(OBJECT(&s->gpt5_gpt6_irq), "num-lines", 2, + &error_abort); + if (!qdev_realize(DEVICE(&s->gpt5_gpt6_irq), NULL, errp)) { + return; + } + + qdev_connect_gpio_out(DEVICE(&s->gpt5_gpt6_irq), 0, + qdev_get_gpio_in(gicdev, FSL_IMX8MM_GPT5_GPT6_IRQ)); + + for (i = 0; i < FSL_IMX8MM_NUM_GPTS; i++) { + hwaddr gpt_addrs[FSL_IMX8MM_NUM_GPTS] = { + fsl_imx8mm_memmap[FSL_IMX8MM_GPT1].addr, + fsl_imx8mm_memmap[FSL_IMX8MM_GPT2].addr, + fsl_imx8mm_memmap[FSL_IMX8MM_GPT3].addr, + fsl_imx8mm_memmap[FSL_IMX8MM_GPT4].addr, + fsl_imx8mm_memmap[FSL_IMX8MM_GPT5].addr, + fsl_imx8mm_memmap[FSL_IMX8MM_GPT6].addr, + }; + + s->gpt[i].ccm = IMX_CCM(&s->ccm); + + if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpt[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpt[i]), 0, gpt_addrs[i]); + + if (i < FSL_IMX8MM_NUM_GPTS - 2) { + static const unsigned int gpt_irqs[FSL_IMX8MM_NUM_GPTS - 2] = { + FSL_IMX8MM_GPT1_IRQ, + FSL_IMX8MM_GPT2_IRQ, + FSL_IMX8MM_GPT3_IRQ, + FSL_IMX8MM_GPT4_IRQ, + }; + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpt[i]), 0, + qdev_get_gpio_in(gicdev, gpt_irqs[i])); + } else { + int irq = i - FSL_IMX8MM_NUM_GPTS + 2; + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpt[i]), 0, + qdev_get_gpio_in(DEVICE(&s->gpt5_gpt6_irq), irq)); + } + } + /* I2Cs */ for (i = 0; i < FSL_IMX8MM_NUM_I2CS; i++) { static const struct { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_GIC_DIST: case FSL_IMX8MM_GIC_REDIST: case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5: + case FSL_IMX8MM_GPT1 ... FSL_IMX8MM_GPT6: case FSL_IMX8MM_ECSPI1 ... FSL_IMX8MM_ECSPI3: case FSL_IMX8MM_I2C1 ... FSL_IMX8MM_I2C4: case FSL_IMX8MM_PCIE1: diff --git a/hw/timer/imx_gpt.c b/hw/timer/imx_gpt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/imx_gpt.c +++ b/hw/timer/imx_gpt.c @@ -XXX,XX +XXX,XX @@ * Originally written by Hans Jiang * Updated by Peter Chubb * Updated by Jean-Christophe Dubois <jcd@tribudubois.net> + * Updated by Gaurav Sharma <gaurav.sharma_7@nxp.com> * * This code is licensed under GPL version 2 or later. See * the COPYING file in the top-level directory. @@ -XXX,XX +XXX,XX @@ static const IMXClk imx8mp_gpt_clocks[] = { CLK_NONE, /* 111 not defined */ }; +static const IMXClk imx8mm_gpt_clocks[] = { + CLK_NONE, /* 000 No clock source */ + CLK_IPG, /* 001 ipg_clk, 532MHz */ + CLK_IPG_HIGH, /* 010 ipg_clk_highfreq */ + CLK_EXT, /* 011 External clock */ + CLK_32k, /* 100 ipg_clk_32k */ + CLK_HIGH, /* 101 ipg_clk_16M */ + CLK_NONE, /* 110 not defined */ + CLK_NONE, /* 111 not defined */ +}; + /* Must be called from within ptimer_transaction_begin/commit block */ static void imx_gpt_set_freq(IMXGPTState *s) { @@ -XXX,XX +XXX,XX @@ static void imx8mp_gpt_init(Object *obj) s->clocks = imx8mp_gpt_clocks; } +static void imx8mm_gpt_init(Object *obj) +{ + IMXGPTState *s = IMX_GPT(obj); + + s->clocks = imx8mm_gpt_clocks; +} + static const TypeInfo imx25_gpt_info = { .name = TYPE_IMX25_GPT, .parent = TYPE_SYS_BUS_DEVICE, @@ -XXX,XX +XXX,XX @@ static const TypeInfo imx8mp_gpt_info = { .instance_init = imx8mp_gpt_init, }; +static const TypeInfo imx8mm_gpt_info = { + .name = TYPE_IMX8MM_GPT, + .parent = TYPE_IMX25_GPT, + .instance_init = imx8mm_gpt_init, +}; + static void imx_gpt_register_types(void) { type_register_static(&imx25_gpt_info); @@ -XXX,XX +XXX,XX @@ static void imx_gpt_register_types(void) type_register_static(&imx6ul_gpt_info); type_register_static(&imx7_gpt_info); type_register_static(&imx8mp_gpt_info); + type_register_static(&imx8mm_gpt_info); } type_init(imx_gpt_register_types) diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx8mp_analog.h" #include "hw/misc/imx8mp_ccm.h" +#include "hw/or-irq.h" #include "hw/pci-host/designware.h" #include "hw/pci-host/fsl_imx8m_phy.h" #include "hw/sd/sdhci.h" #include "hw/ssi/imx_spi.h" +#include "hw/timer/imx_gpt.h" #include "hw/watchdog/wdt_imx2.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ enum FslImx8mmConfiguration { FSL_IMX8MM_NUM_CPUS = 4, FSL_IMX8MM_NUM_ECSPIS = 3, FSL_IMX8MM_NUM_GPIOS = 5, + FSL_IMX8MM_NUM_GPTS = 6, FSL_IMX8MM_NUM_I2CS = 4, FSL_IMX8MM_NUM_IRQS = 128, FSL_IMX8MM_NUM_UARTS = 4, @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { ARMCPU cpu[FSL_IMX8MM_NUM_CPUS]; GICv3State gic; + IMXGPTState gpt[FSL_IMX8MM_NUM_GPTS]; IMXGPIOState gpio[FSL_IMX8MM_NUM_GPIOS]; IMX8MPCCMState ccm; IMX8MPAnalogState analog; @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMX2WdtState wdt[FSL_IMX8MM_NUM_WDTS]; DesignwarePCIEHost pcie; FslImx8mPciePhyState pcie_phy; + OrIRQState gpt5_gpt6_irq; }; enum FslImx8mmMemoryRegions { @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_I2C3_IRQ = 37, FSL_IMX8MM_I2C4_IRQ = 38, + FSL_IMX8MM_GPT1_IRQ = 55, + FSL_IMX8MM_GPT2_IRQ = 54, + FSL_IMX8MM_GPT3_IRQ = 53, + FSL_IMX8MM_GPT4_IRQ = 52, + FSL_IMX8MM_GPT5_GPT6_IRQ = 51, + FSL_IMX8MM_GPIO1_LOW_IRQ = 64, FSL_IMX8MM_GPIO1_HIGH_IRQ = 65, FSL_IMX8MM_GPIO2_LOW_IRQ = 66, diff --git a/include/hw/timer/imx_gpt.h b/include/hw/timer/imx_gpt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/imx_gpt.h +++ b/include/hw/timer/imx_gpt.h @@ -XXX,XX +XXX,XX @@ * Originally written by Hans Jiang * Updated by Peter Chubb * Updated by Jean-Christophe Dubois <jcd@tribudubois.net> + * Updated by Gaurav Sharma <gaurav.sharma_7@nxp.com> * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal @@ -XXX,XX +XXX,XX @@ #define TYPE_IMX6UL_GPT "imx6ul.gpt" #define TYPE_IMX7_GPT "imx7.gpt" #define TYPE_IMX8MP_GPT "imx8mp.gpt" +#define TYPE_IMX8MM_GPT "imx8mm.gpt" #define TYPE_IMX_GPT TYPE_IMX25_GPT -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> It enables emulation of ENET ethernet controller in iMX8MM Enables testing and debugging of network dependent drivers Added ENET MAC IRQ lines Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx8mm.c | 24 ++++++++++++++++++++++++ hw/arm/imx8mm-evk.c | 1 + include/hw/arm/fsl-imx8mm.h | 10 +++++++++- 4 files changed, 35 insertions(+), 1 deletion(-) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM select FSL_IMX8MP_ANALOG select FSL_IMX8MP_CCM select IMX + select IMX_FEC select IMX_I2C select OR_IRQ select SDHCI diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->wdt[i], TYPE_IMX2_WDT); } + object_initialize_child(obj, "eth0", &s->enet, TYPE_IMX_ENET); + object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST); object_initialize_child(obj, "pcie_phy", &s->pcie_phy, TYPE_FSL_IMX8M_PCIE_PHY); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) qdev_get_gpio_in(gicdev, spi_table[i].irq)); } + /* ENET1 */ + object_property_set_uint(OBJECT(&s->enet), "phy-num", s->phy_num, + &error_abort); + object_property_set_uint(OBJECT(&s->enet), "tx-ring-num", 3, &error_abort); + qemu_configure_nic_device(DEVICE(&s->enet), true, NULL); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->enet), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->enet), 0, + fsl_imx8mm_memmap[FSL_IMX8MM_ENET1].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->enet), 0, + qdev_get_gpio_in(gicdev, FSL_IMX8MM_ENET1_MAC_IRQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->enet), 1, + qdev_get_gpio_in(gicdev, FSL_IMX6_ENET1_MAC_1588_IRQ)); + /* SNVS */ if (!sysbus_realize(SYS_BUS_DEVICE(&s->snvs), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5: case FSL_IMX8MM_GPT1 ... FSL_IMX8MM_GPT6: case FSL_IMX8MM_ECSPI1 ... FSL_IMX8MM_ECSPI3: + case FSL_IMX8MM_ENET1: case FSL_IMX8MM_I2C1 ... FSL_IMX8MM_I2C4: case FSL_IMX8MM_PCIE1: case FSL_IMX8MM_PCIE_PHY1: @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) } } +static const Property fsl_imx8mm_properties[] = { + DEFINE_PROP_UINT32("fec1-phy-num", FslImx8mmState, phy_num, 0), + DEFINE_PROP_BOOL("fec1-phy-connected", FslImx8mmState, phy_connected, true), +}; + static void fsl_imx8mm_class_init(ObjectClass *oc, const void *data) { DeviceClass *dc = DEVICE_CLASS(oc); + device_class_set_props(dc, fsl_imx8mm_properties); dc->realize = fsl_imx8mm_realize; dc->desc = "i.MX 8MM SoC"; diff --git a/hw/arm/imx8mm-evk.c b/hw/arm/imx8mm-evk.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/imx8mm-evk.c +++ b/hw/arm/imx8mm-evk.c @@ -XXX,XX +XXX,XX @@ static void imx8mm_evk_init(MachineState *machine) s = FSL_IMX8MM(object_new_with_props(TYPE_FSL_IMX8MM, OBJECT(machine), "soc", &error_fatal, NULL)); + object_property_set_uint(OBJECT(s), "fec1-phy-num", 1, &error_fatal); sysbus_realize_and_unref(SYS_BUS_DEVICE(s), &error_fatal); memory_region_add_subregion(get_system_memory(), FSL_IMX8MM_RAM_START, diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx8mp_analog.h" #include "hw/misc/imx8mp_ccm.h" -#include "hw/or-irq.h" +#include "hw/net/imx_fec.h" +#include "hw/core/or-irq.h" #include "hw/pci-host/designware.h" #include "hw/pci-host/fsl_imx8m_phy.h" #include "hw/sd/sdhci.h" @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMXI2CState i2c[FSL_IMX8MM_NUM_I2CS]; IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; + IMXFECState enet; SDHCIState usdhc[FSL_IMX8MM_NUM_USDHCS]; IMX2WdtState wdt[FSL_IMX8MM_NUM_WDTS]; DesignwarePCIEHost pcie; FslImx8mPciePhyState pcie_phy; OrIRQState gpt5_gpt6_irq; + + uint32_t phy_num; + bool phy_connected; }; enum FslImx8mmMemoryRegions { @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_WDOG2_IRQ = 79, FSL_IMX8MM_WDOG3_IRQ = 10, + FSL_IMX8MM_ENET1_MAC_IRQ = 118, + FSL_IMX6_ENET1_MAC_1588_IRQ = 121, + FSL_IMX8MM_PCI_INTA_IRQ = 122, FSL_IMX8MM_PCI_INTB_IRQ = 123, FSL_IMX8MM_PCI_INTC_IRQ = 124, -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> It enables emulation of USB on iMX8MM Enables testing and debugging of USB drivers Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx8mm.c | 27 +++++++++++++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 6 ++++++ 3 files changed, 34 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM select SDHCI select PCI_EXPRESS_DESIGNWARE select PCI_EXPRESS_FSL_IMX8M_PHY + select USB_DWC3 select WDT_IMX2 config FSL_IMX8MM_EVK diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC); } + for (i = 0; i < FSL_IMX8MM_NUM_USBS; i++) { + g_autofree char *name = g_strdup_printf("usb%d", i); + object_initialize_child(obj, name, &s->usb[i], TYPE_USB_DWC3); + } + for (i = 0; i < FSL_IMX8MM_NUM_ECSPIS; i++) { g_autofree char *name = g_strdup_printf("spi%d", i + 1); object_initialize_child(obj, name, &s->spi[i], TYPE_IMX_SPI); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) qdev_get_gpio_in(gicdev, usdhc_table[i].irq)); } + /* USBs */ + for (i = 0; i < FSL_IMX8MM_NUM_USBS; i++) { + static const struct { + hwaddr addr; + unsigned int irq; + } usb_table[FSL_IMX8MM_NUM_USBS] = { + { fsl_imx8mm_memmap[FSL_IMX8MM_USB1].addr, FSL_IMX8MM_USB1_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_USB2].addr, FSL_IMX8MM_USB2_IRQ }, + }; + + qdev_prop_set_uint32(DEVICE(&s->usb[i].sysbus_xhci), "p2", 1); + qdev_prop_set_uint32(DEVICE(&s->usb[i].sysbus_xhci), "p3", 1); + qdev_prop_set_uint32(DEVICE(&s->usb[i].sysbus_xhci), "slots", 2); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->usb[i]), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->usb[i]), 0, usb_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->usb[i].sysbus_xhci), 0, + qdev_get_gpio_in(gicdev, usb_table[i].irq)); + } + /* ECSPIs */ for (i = 0; i < FSL_IMX8MM_NUM_ECSPIS; i++) { static const struct { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_OCRAM: case FSL_IMX8MM_SNVS_HP: case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4: + case FSL_IMX8MM_USB1 ... FSL_IMX8MM_USB2: case FSL_IMX8MM_USDHC1 ... FSL_IMX8MM_USDHC3: case FSL_IMX8MM_WDOG1 ... FSL_IMX8MM_WDOG3: /* device implemented and treated above */ diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/sd/sdhci.h" #include "hw/ssi/imx_spi.h" #include "hw/timer/imx_gpt.h" +#include "hw/usb/hcd-dwc3.h" #include "hw/watchdog/wdt_imx2.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ enum FslImx8mmConfiguration { FSL_IMX8MM_NUM_I2CS = 4, FSL_IMX8MM_NUM_IRQS = 128, FSL_IMX8MM_NUM_UARTS = 4, + FSL_IMX8MM_NUM_USBS = 2, FSL_IMX8MM_NUM_USDHCS = 3, FSL_IMX8MM_NUM_WDTS = 3, }; @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMXFECState enet; SDHCIState usdhc[FSL_IMX8MM_NUM_USDHCS]; IMX2WdtState wdt[FSL_IMX8MM_NUM_WDTS]; + USBDWC3 usb[FSL_IMX8MM_NUM_USBS]; DesignwarePCIEHost pcie; FslImx8mPciePhyState pcie_phy; OrIRQState gpt5_gpt6_irq; @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_I2C3_IRQ = 37, FSL_IMX8MM_I2C4_IRQ = 38, + FSL_IMX8MM_USB1_IRQ = 40, + FSL_IMX8MM_USB2_IRQ = 41, + FSL_IMX8MM_GPT1_IRQ = 55, FSL_IMX8MM_GPT2_IRQ = 54, FSL_IMX8MM_GPT3_IRQ = 53, -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> Added script that would validate the iMX8MM emulation by checking the linux console log. If it succeeds, it will return:- ok 1 test_imx8mm_evk.Imx8mmEvkMachine.test_aarch64_imx8mm_evk_usdhc Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Bernhard Beschow <shentey@gmail.com> [PMM: Add missing blank lines that flake8 wants] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 1 + tests/functional/aarch64/meson.build | 2 + tests/functional/aarch64/test_imx8mm_evk.py | 69 +++++++++++++++++++++ 3 files changed, 72 insertions(+) create mode 100755 tests/functional/aarch64/test_imx8mm_evk.py diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/arm/fsl-imx8mm.c F: hw/arm/imx8mm-evk.c F: include/hw/arm/fsl-imx8mm.h F: docs/system/arm/imx8m.rst +F: tests/functional/aarch64/test_imx8mm_evk.py MCIMX8MP-EVK / i.MX8MP M: Bernhard Beschow <shentey@gmail.com> diff --git a/tests/functional/aarch64/meson.build b/tests/functional/aarch64/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/functional/aarch64/meson.build +++ b/tests/functional/aarch64/meson.build @@ -XXX,XX +XXX,XX @@ test_aarch64_timeouts = { 'aspeed_ast2700a2' : 600, 'aspeed_ast2700fc' : 600, 'device_passthrough' : 720, + 'imx8mm_evk' : 240, 'imx8mp_evk' : 240, 'raspi4' : 480, 'reverse_debug' : 180, @@ -XXX,XX +XXX,XX @@ tests_aarch64_system_thorough = [ 'aspeed_ast2700fc', 'device_passthrough', 'hotplug_pci', + 'imx8mm_evk', 'imx8mp_evk', 'kvm', 'multiprocess', diff --git a/tests/functional/aarch64/test_imx8mm_evk.py b/tests/functional/aarch64/test_imx8mm_evk.py new file mode 100755 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/functional/aarch64/test_imx8mm_evk.py @@ -XXX,XX +XXX,XX @@ +#!/usr/bin/env python3 +# +# Functional test that boots a Linux kernel and checks the console +# +# SPDX-License-Identifier: GPL-2.0-or-later + +from qemu_test import LinuxKernelTest, Asset + + +class Imx8mmEvkMachine(LinuxKernelTest): + + ASSET_IMAGE = Asset( + ('https://cloud.debian.org/images/cloud/bookworm/20231210-1590/' + 'debian-12-generic-arm64-20231210-1590.tar.xz'), + '7ebf1577b32d5af6204df74b54ca2e4675de9b5a9fa14f3ff70b88eeb7b3b359') + + KERNEL_OFFSET = 0x51000000 + KERNEL_SIZE = 32622528 + INITRD_OFFSET = 0x76000000 + INITRD_SIZE = 30987766 + DTB_OFFSET = 0x64DB5000 + DTB_SIZE = 36812 + + def extract(self, in_path, out_path, offset, size): + try: + with open(in_path, "rb") as source: + source.seek(offset) + data = source.read(size) + with open(out_path, "wb") as target: + target.write(data) + except (IOError, ValueError) as e: + self.log.error(f"Failed to extract {out_path}: {e}") + raise + + def setUp(self): + super().setUp() + + self.image_path = self.scratch_file("disk.raw") + self.kernel_path = self.scratch_file("linux") + self.initrd_path = self.scratch_file("initrd.zstd") + self.dtb_path = self.scratch_file("imx8mm-evk.dtb") + + self.archive_extract(self.ASSET_IMAGE) + self.extract(self.image_path, self.kernel_path, + self.KERNEL_OFFSET, self.KERNEL_SIZE) + self.extract(self.image_path, self.initrd_path, + self.INITRD_OFFSET, self.INITRD_SIZE) + self.extract(self.image_path, self.dtb_path, + self.DTB_OFFSET, self.DTB_SIZE) + + def test_aarch64_imx8mm_evk_usdhc(self): + self.require_accelerator("tcg") + self.set_machine('imx8mm-evk') + self.vm.set_console(console_index=1) + self.vm.add_args('-m', '2G', + '-smp', '4', + '-kernel', self.kernel_path, + '-initrd', self.initrd_path, + '-dtb', self.dtb_path, + '-append', 'root=/dev/mmcblk2p1', + '-drive', f'file={self.image_path},if=sd,bus=2,' + 'format=raw,id=mmcblk2,snapshot=on') + + self.vm.launch() + self.wait_for_console_pattern('Welcome to ') + + +if __name__ == '__main__': + LinuxKernelTest.main() -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> As mentioned by Richard in [*]: We don't actually need any specific endianness here, because every byte has the same value. So we could simply drop MO_TE. That would produce a store in host-endianness, which will be fractionally more efficient on some hosts. [*] https://lore.kernel.org/qemu-devel/d64d3576-9188-4e74-afdc-3492c9feb8e0@linaro.org/ Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20260414005348.4767-2-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/helper-a64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/tcg/helper-a64.c b/target/arm/tcg/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/helper-a64.c +++ b/target/arm/tcg/helper-a64.c @@ -XXX,XX +XXX,XX @@ static uint64_t set_step_tags(CPUARMState *env, uint64_t toaddr, * the page dirty and will use the fast path. */ uint64_t repldata = data * 0x0101010101010101ULL; - MemOpIdx oi16 = make_memop_idx(MO_TE | MO_128, memidx); + MemOpIdx oi16 = make_memop_idx(MO_128, memidx); cpu_st16_mmu(env, toaddr, int128_make128(repldata, repldata), oi16, ra); mte_mops_set_tags(env, toaddr, 16, *mtedesc); return 16; -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Extract the implicit MO_TE definition in order to replace it in the next commit. Mechanical change using: $ for n in UW UL UQ UO SW SL SQ; do \ sed -i -e "s/MO_TE$n/MO_TE | MO_$n/" \ $(git grep -l MO_TE$n target/arm); \ done Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-3-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/m_helper.c | 6 +-- target/arm/tcg/mve_helper.c | 79 ++++++++++++++++++++----------------- 2 files changed, 45 insertions(+), 40 deletions(-) diff --git a/target/arm/tcg/m_helper.c b/target/arm/tcg/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/m_helper.c +++ b/target/arm/tcg/m_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest) /* Note that these stores can throw exceptions on MPU faults */ ARMMMUIdx mmu_idx = arm_mmu_idx(env); - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, arm_to_core_mmu_idx(mmu_idx)); cpu_stl_mmu(env, sp, nextinst, oi, GETPC()); cpu_stl_mmu(env, sp + 4, saved_psr, oi, GETPC()); @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) bool lspact = env->v7m.fpccr[s] & R_V7M_FPCCR_LSPACT_MASK; uintptr_t ra = GETPC(); ARMMMUIdx mmu_idx = arm_mmu_idx(env); - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, arm_to_core_mmu_idx(mmu_idx)); assert(env->v7m.secure); @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlldm)(CPUARMState *env, uint32_t fptr) ARMCPU *cpu = env_archcpu(env); uintptr_t ra = GETPC(); ARMMMUIdx mmu_idx = arm_mmu_idx(env); - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, arm_to_core_mmu_idx(mmu_idx)); /* fptr is the value of Rn, the frame pointer we load the FP regs from */ diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mve_helper.c +++ b/target/arm/tcg/mve_helper.c @@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env) } DO_VLDR(vldrb, MO_UB, 1, uint8_t, ldb, 1, uint8_t) -DO_VLDR(vldrh, MO_TEUW, 2, uint16_t, ldw, 2, uint16_t) -DO_VLDR(vldrw, MO_TEUL, 4, uint32_t, ldl, 4, uint32_t) +DO_VLDR(vldrh, MO_TE | MO_UW, 2, uint16_t, ldw, 2, uint16_t) +DO_VLDR(vldrw, MO_TE | MO_UL, 4, uint32_t, ldl, 4, uint32_t) DO_VSTR(vstrb, MO_UB, 1, stb, 1, uint8_t) -DO_VSTR(vstrh, MO_TEUW, 2, stw, 2, uint16_t) -DO_VSTR(vstrw, MO_TEUL, 4, stl, 4, uint32_t) +DO_VSTR(vstrh, MO_TE | MO_UW, 2, stw, 2, uint16_t) +DO_VSTR(vstrw, MO_TE | MO_UL, 4, stl, 4, uint32_t) DO_VLDR(vldrb_sh, MO_SB, 1, int8_t, ldb, 2, int16_t) DO_VLDR(vldrb_sw, MO_SB, 1, int8_t, ldb, 4, int32_t) DO_VLDR(vldrb_uh, MO_UB, 1, uint8_t, ldb, 2, uint16_t) DO_VLDR(vldrb_uw, MO_UB, 1, uint8_t, ldb, 4, uint32_t) -DO_VLDR(vldrh_sw, MO_TESW, 2, int16_t, ldw, 4, int32_t) -DO_VLDR(vldrh_uw, MO_TEUW, 2, uint16_t, ldw, 4, uint32_t) +DO_VLDR(vldrh_sw, MO_TE | MO_SW, 2, int16_t, ldw, 4, int32_t) +DO_VLDR(vldrh_uw, MO_TE | MO_UW, 2, uint16_t, ldw, 4, uint32_t) DO_VSTR(vstrb_h, MO_UB, 1, stb, 2, int16_t) DO_VSTR(vstrb_w, MO_UB, 1, stb, 4, int32_t) -DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t) +DO_VSTR(vstrh_w, MO_TE | MO_UW, 2, stw, 4, int32_t) #undef DO_VLDR #undef DO_VSTR @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (e = 0; e < 16 / 4; e++, mask >>= 4, eci_mask >>= 4) { \ if (!(eci_mask & 1)) { \ continue; \ @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (e = 0; e < 16 / 4; e++, mask >>= 4, eci_mask >>= 4) { \ if (!(eci_mask & 1)) { \ continue; \ @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t) DO_VLDR_SG(vldrb_sg_sh, MO_SB, int8_t, ldb, 2, int16_t, uint16_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_sw, MO_SB, int8_t, ldb, 4, int32_t, uint32_t, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_sw, MO_TESW, int16_t, ldw, 4, int32_t, uint32_t, ADDR_ADD, false) +DO_VLDR_SG(vldrh_sg_sw, MO_TE | MO_SW, int16_t, ldw, 4, + int32_t, uint32_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_ub, MO_UB, uint8_t, ldb, 1, uint8_t, uint8_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_uh, MO_UB, uint8_t, ldb, 2, uint16_t, uint16_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_uw, MO_UB, uint8_t, ldb, 4, uint32_t, uint32_t, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_uh, MO_TEUW, uint16_t, ldw, 2, uint16_t, uint16_t, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_uw, MO_TEUW, uint16_t, ldw, 4, uint32_t, uint32_t, ADDR_ADD, false) -DO_VLDR_SG(vldrw_sg_uw, MO_TEUL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD, false) +DO_VLDR_SG(vldrh_sg_uh, MO_TE | MO_UW, uint16_t, ldw, 2, + uint16_t, uint16_t, ADDR_ADD, false) +DO_VLDR_SG(vldrh_sg_uw, MO_TE | MO_UW, uint16_t, ldw, 4, + uint32_t, uint32_t, ADDR_ADD, false) +DO_VLDR_SG(vldrw_sg_uw, MO_TE | MO_UL, uint32_t, ldl, 4, + uint32_t, uint32_t, ADDR_ADD, false) DO_VLDR64_SG(vldrd_sg_ud, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_os_sw, MO_TESW, int16_t, ldw, 4, +DO_VLDR_SG(vldrh_sg_os_sw, MO_TE | MO_SW, int16_t, ldw, 4, int32_t, uint32_t, ADDR_ADD_OSH, false) -DO_VLDR_SG(vldrh_sg_os_uh, MO_TEUW, uint16_t, ldw, 2, +DO_VLDR_SG(vldrh_sg_os_uh, MO_TE | MO_UW, uint16_t, ldw, 2, uint16_t, uint16_t, ADDR_ADD_OSH, false) -DO_VLDR_SG(vldrh_sg_os_uw, MO_TEUW, uint16_t, ldw, 4, +DO_VLDR_SG(vldrh_sg_os_uw, MO_TE | MO_UW, uint16_t, ldw, 4, uint32_t, uint32_t, ADDR_ADD_OSH, false) -DO_VLDR_SG(vldrw_sg_os_uw, MO_TEUL, uint32_t, ldl, 4, +DO_VLDR_SG(vldrw_sg_os_uw, MO_TE | MO_UL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD_OSW, false) DO_VLDR64_SG(vldrd_sg_os_ud, ADDR_ADD_OSD, false) DO_VSTR_SG(vstrb_sg_ub, MO_UB, stb, 1, uint8_t, ADDR_ADD, false) DO_VSTR_SG(vstrb_sg_uh, MO_UB, stb, 2, uint16_t, ADDR_ADD, false) DO_VSTR_SG(vstrb_sg_uw, MO_UB, stb, 4, uint32_t, ADDR_ADD, false) -DO_VSTR_SG(vstrh_sg_uh, MO_TEUW, stw, 2, uint16_t, ADDR_ADD, false) -DO_VSTR_SG(vstrh_sg_uw, MO_TEUW, stw, 4, uint32_t, ADDR_ADD, false) -DO_VSTR_SG(vstrw_sg_uw, MO_TEUL, stl, 4, uint32_t, ADDR_ADD, false) +DO_VSTR_SG(vstrh_sg_uh, MO_TE | MO_UW, stw, 2, uint16_t, ADDR_ADD, false) +DO_VSTR_SG(vstrh_sg_uw, MO_TE | MO_UW, stw, 4, uint32_t, ADDR_ADD, false) +DO_VSTR_SG(vstrw_sg_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD, false) DO_VSTR64_SG(vstrd_sg_ud, ADDR_ADD, false) -DO_VSTR_SG(vstrh_sg_os_uh, MO_TEUW, stw, 2, uint16_t, ADDR_ADD_OSH, false) -DO_VSTR_SG(vstrh_sg_os_uw, MO_TEUW, stw, 4, uint32_t, ADDR_ADD_OSH, false) -DO_VSTR_SG(vstrw_sg_os_uw, MO_TEUL, stl, 4, uint32_t, ADDR_ADD_OSW, false) +DO_VSTR_SG(vstrh_sg_os_uh, MO_TE | MO_UW, stw, 2, uint16_t, ADDR_ADD_OSH, false) +DO_VSTR_SG(vstrh_sg_os_uw, MO_TE | MO_UW, stw, 4, uint32_t, ADDR_ADD_OSH, false) +DO_VSTR_SG(vstrw_sg_os_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD_OSW, false) DO_VSTR64_SG(vstrd_sg_os_ud, ADDR_ADD_OSD, false) -DO_VLDR_SG(vldrw_sg_wb_uw, MO_TEUL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD, true) +DO_VLDR_SG(vldrw_sg_wb_uw, MO_TE | MO_UL, uint32_t, ldl, 4, + uint32_t, uint32_t, ADDR_ADD, true) DO_VLDR64_SG(vldrd_sg_wb_ud, ADDR_ADD, true) -DO_VSTR_SG(vstrw_sg_wb_uw, MO_TEUL, stl, 4, uint32_t, ADDR_ADD, true) +DO_VSTR_SG(vstrw_sg_wb_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD, true) DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) /* @@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) static const uint8_t off[4] = { O1, O2, O3, O4 }; \ uint32_t addr, data; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) int y; /* y counts 0 2 0 2 */ \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0, y = 0; beat < 4; beat++, mask >>= 4, y ^= 2) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) uint32_t *qd; \ int y; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9) uint32_t addr, data; \ uint8_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9) int e; \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9) uint32_t addr, data; \ uint32_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20) static const uint8_t off[4] = { O1, O2, O3, O4 }; \ uint32_t addr, data; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20) int y; /* y counts 0 2 0 2 */ \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0, y = 0; beat < 4; beat++, mask >>= 4, y ^= 2) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20) uint32_t *qd; \ int y; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9) uint32_t addr, data; \ uint8_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9) int e; \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9) uint32_t addr, data; \ uint32_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-4-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/mve_helper.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mve_helper.c +++ b/target/arm/tcg/mve_helper.c @@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env) uint16_t eci_mask = mve_eci_mask(env); \ unsigned b, e; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MFLAG | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + mmu_idx); \ /* \ * R_SXTM allows the dest reg to become UNKNOWN for abandoned \ * beats so we don't care if we update part of the dest and \ @@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env) uint16_t mask = mve_element_mask(env); \ unsigned b, e; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MFLAG | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + mmu_idx); \ for (b = 0, e = 0; b < 16; b += ESIZE, e++) { \ if (mask & (1 << b)) { \ cpu_##STTYPE##_mmu(env, addr, d[H##ESIZE(e)], oi, GETPC()); \ @@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env) } DO_VLDR(vldrb, MO_UB, 1, uint8_t, ldb, 1, uint8_t) -DO_VLDR(vldrh, MO_TE | MO_UW, 2, uint16_t, ldw, 2, uint16_t) -DO_VLDR(vldrw, MO_TE | MO_UL, 4, uint32_t, ldl, 4, uint32_t) +DO_VLDR(vldrh, MO_UW, 2, uint16_t, ldw, 2, uint16_t) +DO_VLDR(vldrw, MO_UL, 4, uint32_t, ldl, 4, uint32_t) DO_VSTR(vstrb, MO_UB, 1, stb, 1, uint8_t) -DO_VSTR(vstrh, MO_TE | MO_UW, 2, stw, 2, uint16_t) -DO_VSTR(vstrw, MO_TE | MO_UL, 4, stl, 4, uint32_t) +DO_VSTR(vstrh, MO_UW, 2, stw, 2, uint16_t) +DO_VSTR(vstrw, MO_UL, 4, stl, 4, uint32_t) DO_VLDR(vldrb_sh, MO_SB, 1, int8_t, ldb, 2, int16_t) DO_VLDR(vldrb_sw, MO_SB, 1, int8_t, ldb, 4, int32_t) DO_VLDR(vldrb_uh, MO_UB, 1, uint8_t, ldb, 2, uint16_t) DO_VLDR(vldrb_uw, MO_UB, 1, uint8_t, ldb, 4, uint32_t) -DO_VLDR(vldrh_sw, MO_TE | MO_SW, 2, int16_t, ldw, 4, int32_t) -DO_VLDR(vldrh_uw, MO_TE | MO_UW, 2, uint16_t, ldw, 4, uint32_t) +DO_VLDR(vldrh_sw, MO_SW, 2, int16_t, ldw, 4, int32_t) +DO_VLDR(vldrh_uw, MO_UW, 2, uint16_t, ldw, 4, uint32_t) DO_VSTR(vstrb_h, MO_UB, 1, stb, 2, int16_t) DO_VSTR(vstrb_w, MO_UB, 1, stb, 4, int32_t) -DO_VSTR(vstrh_w, MO_TE | MO_UW, 2, stw, 4, int32_t) +DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) #undef DO_VLDR #undef DO_VSTR -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-5-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/mve_helper.c | 43 +++++++++++++++++-------------------- 1 file changed, 20 insertions(+), 23 deletions(-) diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mve_helper.c +++ b/target/arm/tcg/mve_helper.c @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MFLAG | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + mmu_idx); \ for (e = 0; e < 16 / ESIZE; e++, mask >>= ESIZE, eci_mask >>= ESIZE) { \ if (!(eci_mask & 1)) { \ continue; \ @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MFLAG | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + mmu_idx); \ for (e = 0; e < 16 / ESIZE; e++, mask >>= ESIZE, eci_mask >>= ESIZE) { \ if (!(eci_mask & 1)) { \ continue; \ @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) DO_VLDR_SG(vldrb_sg_sh, MO_SB, int8_t, ldb, 2, int16_t, uint16_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_sw, MO_SB, int8_t, ldb, 4, int32_t, uint32_t, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_sw, MO_TE | MO_SW, int16_t, ldw, 4, - int32_t, uint32_t, ADDR_ADD, false) +DO_VLDR_SG(vldrh_sg_sw, MO_SW, int16_t, ldw, 4, int32_t, uint32_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_ub, MO_UB, uint8_t, ldb, 1, uint8_t, uint8_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_uh, MO_UB, uint8_t, ldb, 2, uint16_t, uint16_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_uw, MO_UB, uint8_t, ldb, 4, uint32_t, uint32_t, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_uh, MO_TE | MO_UW, uint16_t, ldw, 2, - uint16_t, uint16_t, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_uw, MO_TE | MO_UW, uint16_t, ldw, 4, - uint32_t, uint32_t, ADDR_ADD, false) -DO_VLDR_SG(vldrw_sg_uw, MO_TE | MO_UL, uint32_t, ldl, 4, - uint32_t, uint32_t, ADDR_ADD, false) +DO_VLDR_SG(vldrh_sg_uh, MO_UW, uint16_t, ldw, 2, uint16_t, uint16_t, ADDR_ADD, false) +DO_VLDR_SG(vldrh_sg_uw, MO_UW, uint16_t, ldw, 4, uint32_t, uint32_t, ADDR_ADD, false) +DO_VLDR_SG(vldrw_sg_uw, MO_UL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD, false) DO_VLDR64_SG(vldrd_sg_ud, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_os_sw, MO_TE | MO_SW, int16_t, ldw, 4, +DO_VLDR_SG(vldrh_sg_os_sw, MO_SW, int16_t, ldw, 4, int32_t, uint32_t, ADDR_ADD_OSH, false) -DO_VLDR_SG(vldrh_sg_os_uh, MO_TE | MO_UW, uint16_t, ldw, 2, +DO_VLDR_SG(vldrh_sg_os_uh, MO_UW, uint16_t, ldw, 2, uint16_t, uint16_t, ADDR_ADD_OSH, false) -DO_VLDR_SG(vldrh_sg_os_uw, MO_TE | MO_UW, uint16_t, ldw, 4, +DO_VLDR_SG(vldrh_sg_os_uw, MO_UW, uint16_t, ldw, 4, uint32_t, uint32_t, ADDR_ADD_OSH, false) -DO_VLDR_SG(vldrw_sg_os_uw, MO_TE | MO_UL, uint32_t, ldl, 4, +DO_VLDR_SG(vldrw_sg_os_uw, MO_UL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD_OSW, false) DO_VLDR64_SG(vldrd_sg_os_ud, ADDR_ADD_OSD, false) DO_VSTR_SG(vstrb_sg_ub, MO_UB, stb, 1, uint8_t, ADDR_ADD, false) DO_VSTR_SG(vstrb_sg_uh, MO_UB, stb, 2, uint16_t, ADDR_ADD, false) DO_VSTR_SG(vstrb_sg_uw, MO_UB, stb, 4, uint32_t, ADDR_ADD, false) -DO_VSTR_SG(vstrh_sg_uh, MO_TE | MO_UW, stw, 2, uint16_t, ADDR_ADD, false) -DO_VSTR_SG(vstrh_sg_uw, MO_TE | MO_UW, stw, 4, uint32_t, ADDR_ADD, false) -DO_VSTR_SG(vstrw_sg_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD, false) +DO_VSTR_SG(vstrh_sg_uh, MO_UW, stw, 2, uint16_t, ADDR_ADD, false) +DO_VSTR_SG(vstrh_sg_uw, MO_UW, stw, 4, uint32_t, ADDR_ADD, false) +DO_VSTR_SG(vstrw_sg_uw, MO_UL, stl, 4, uint32_t, ADDR_ADD, false) DO_VSTR64_SG(vstrd_sg_ud, ADDR_ADD, false) -DO_VSTR_SG(vstrh_sg_os_uh, MO_TE | MO_UW, stw, 2, uint16_t, ADDR_ADD_OSH, false) -DO_VSTR_SG(vstrh_sg_os_uw, MO_TE | MO_UW, stw, 4, uint32_t, ADDR_ADD_OSH, false) -DO_VSTR_SG(vstrw_sg_os_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD_OSW, false) +DO_VSTR_SG(vstrh_sg_os_uh, MO_UW, stw, 2, uint16_t, ADDR_ADD_OSH, false) +DO_VSTR_SG(vstrh_sg_os_uw, MO_UW, stw, 4, uint32_t, ADDR_ADD_OSH, false) +DO_VSTR_SG(vstrw_sg_os_uw, MO_UL, stl, 4, uint32_t, ADDR_ADD_OSW, false) DO_VSTR64_SG(vstrd_sg_os_ud, ADDR_ADD_OSD, false) -DO_VLDR_SG(vldrw_sg_wb_uw, MO_TE | MO_UL, uint32_t, ldl, 4, - uint32_t, uint32_t, ADDR_ADD, true) +DO_VLDR_SG(vldrw_sg_wb_uw, MO_UL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD, true) DO_VLDR64_SG(vldrd_sg_wb_ud, ADDR_ADD, true) -DO_VSTR_SG(vstrw_sg_wb_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD, true) +DO_VSTR_SG(vstrw_sg_wb_uw, MO_UL, stl, 4, uint32_t, ADDR_ADD, true) DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) /* -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-6-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 6 ++++++ target/arm/tcg/mve_helper.c | 3 ++- 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ #include "exec/hwaddr.h" #include "exec/vaddr.h" #include "exec/breakpoint.h" +#include "exec/memop.h" #include "accel/tcg/tb-cpu-state.h" #include "hw/core/registerfields.h" #include "tcg/tcg-gvec-desc.h" @@ -XXX,XX +XXX,XX @@ #define BANK_HYP 6 #define BANK_MON 7 +static inline MemOp mo_endian(CPUARMState *env) +{ + return EX_TBFLAG_ANY(env->hflags, BE_DATA) ? MO_BE : MO_LE; +} + static inline int arm_env_mmu_index(CPUARMState *env) { return EX_TBFLAG_ANY(env->hflags, MMUIDX); diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mve_helper.c +++ b/target/arm/tcg/mve_helper.c @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (e = 0; e < 16 / 4; e++, mask >>= 4, eci_mask >>= 4) { \ if (!(eci_mask & 1)) { \ continue; \ -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-7-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/mve_helper.c | 47 +++++++++++++++++++++++-------------- 1 file changed, 30 insertions(+), 17 deletions(-) diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mve_helper.c +++ b/target/arm/tcg/mve_helper.c @@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env) uint16_t eci_mask = mve_eci_mask(env); \ unsigned b, e; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MFLAG | MO_ALIGN, \ mmu_idx); \ /* \ * R_SXTM allows the dest reg to become UNKNOWN for abandoned \ @@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env) uint16_t mask = mve_element_mask(env); \ unsigned b, e; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MFLAG | MO_ALIGN, \ mmu_idx); \ for (b = 0, e = 0; b < 16; b += ESIZE, e++) { \ if (mask & (1 << b)) { \ @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MFLAG | MO_ALIGN, \ mmu_idx); \ for (e = 0; e < 16 / ESIZE; e++, mask >>= ESIZE, eci_mask >>= ESIZE) { \ if (!(eci_mask & 1)) { \ @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MFLAG | MO_ALIGN, \ mmu_idx); \ for (e = 0; e < 16 / ESIZE; e++, mask >>= ESIZE, eci_mask >>= ESIZE) { \ if (!(eci_mask & 1)) { \ @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (e = 0; e < 16 / 4; e++, mask >>= 4, eci_mask >>= 4) { \ if (!(eci_mask & 1)) { \ continue; \ @@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) static const uint8_t off[4] = { O1, O2, O3, O4 }; \ uint32_t addr, data; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) int y; /* y counts 0 2 0 2 */ \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0, y = 0; beat < 4; beat++, mask >>= 4, y ^= 2) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) uint32_t *qd; \ int y; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9) uint32_t addr, data; \ uint8_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9) int e; \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9) uint32_t addr, data; \ uint32_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20) static const uint8_t off[4] = { O1, O2, O3, O4 }; \ uint32_t addr, data; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20) int y; /* y counts 0 2 0 2 */ \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0, y = 0; beat < 4; beat++, mask >>= 4, y ^= 2) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20) uint32_t *qd; \ int y; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9) uint32_t addr, data; \ uint8_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9) int e; \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9) uint32_t addr, data; \ uint32_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-8-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/meson.build | 3 ++- target/arm/tcg/mve_helper.c | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/target/arm/tcg/meson.build b/target/arm/tcg/meson.build index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/meson.build +++ b/target/arm/tcg/meson.build @@ -XXX,XX +XXX,XX @@ arm_ss.add(when: 'TARGET_AARCH64', if_false: files('stubs32.c')) arm_ss.add(files( 'cpu32.c', 'm_helper.c', - 'mve_helper.c', )) arm_ss.add(when: 'TARGET_AARCH64', if_true: files( @@ -XXX,XX +XXX,XX @@ arm_common_system_ss.add( 'debug.c', 'hflags.c', 'gengvec.c', + 'mve_helper.c', 'neon_helper.c', 'op_helper.c', 'psci.c', @@ -XXX,XX +XXX,XX @@ arm_user_ss.add( 'debug.c', 'gengvec.c', 'hflags.c', + 'mve_helper.c', 'neon_helper.c', 'op_helper.c', 'tlb_helper.c', diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mve_helper.c +++ b/target/arm/tcg/mve_helper.c @@ -XXX,XX +XXX,XX @@ #include "helper-mve.h" #include "internals.h" #include "vec_internal.h" -#include "accel/tcg/cpu-ldst.h" +#include "accel/tcg/cpu-ldst-common.h" #include "tcg/tcg.h" #include "fpu/softfloat.h" #include "crypto/clmul.h" -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-9-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/m_helper.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/target/arm/tcg/m_helper.c b/target/arm/tcg/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/m_helper.c +++ b/target/arm/tcg/m_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest) /* Note that these stores can throw exceptions on MPU faults */ ARMMMUIdx mmu_idx = arm_mmu_idx(env); - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, arm_to_core_mmu_idx(mmu_idx)); cpu_stl_mmu(env, sp, nextinst, oi, GETPC()); cpu_stl_mmu(env, sp + 4, saved_psr, oi, GETPC()); @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) bool lspact = env->v7m.fpccr[s] & R_V7M_FPCCR_LSPACT_MASK; uintptr_t ra = GETPC(); ARMMMUIdx mmu_idx = arm_mmu_idx(env); - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, arm_to_core_mmu_idx(mmu_idx)); assert(env->v7m.secure); @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlldm)(CPUARMState *env, uint32_t fptr) ARMCPU *cpu = env_archcpu(env); uintptr_t ra = GETPC(); ARMMMUIdx mmu_idx = arm_mmu_idx(env); - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, arm_to_core_mmu_idx(mmu_idx)); /* fptr is the value of Rn, the frame pointer we load the FP regs from */ -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-10-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/m_helper.c | 2 +- target/arm/tcg/meson.build | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/target/arm/tcg/m_helper.c b/target/arm/tcg/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/m_helper.c +++ b/target/arm/tcg/m_helper.c @@ -XXX,XX +XXX,XX @@ #include "qemu/log.h" #include "exec/page-protection.h" #ifdef CONFIG_TCG -#include "accel/tcg/cpu-ldst.h" +#include "accel/tcg/cpu-ldst-common.h" #include "semihosting/common-semi.h" #endif #if !defined(CONFIG_USER_ONLY) diff --git a/target/arm/tcg/meson.build b/target/arm/tcg/meson.build index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/meson.build +++ b/target/arm/tcg/meson.build @@ -XXX,XX +XXX,XX @@ arm_ss.add(when: 'TARGET_AARCH64', if_false: files('stubs32.c')) arm_ss.add(files( 'cpu32.c', - 'm_helper.c', )) arm_ss.add(when: 'TARGET_AARCH64', if_true: files( @@ -XXX,XX +XXX,XX @@ arm_common_system_ss.add( 'debug.c', 'hflags.c', 'gengvec.c', + 'm_helper.c', 'mve_helper.c', 'neon_helper.c', 'op_helper.c', @@ -XXX,XX +XXX,XX @@ arm_user_ss.add( 'debug.c', 'gengvec.c', 'hflags.c', + 'm_helper.c', 'mve_helper.c', 'neon_helper.c', 'op_helper.c', -- 2.43.0 From: Thomas Huth <thuth@redhat.com> When writing to this register, QEMU currently aborts: $ echo "readl 0x10000018" | ./qemu-system-arm -audiodev none,id=snd0 \ -M integratorcp,accel=qtest,audiodev=snd0 -display none -qtest stdio [I 0.000000] OPENED [R +0.001907] readl 0x10000018 qemu: hardware error: integratorcm_read: CM_LMBUSCNT [...] Aborted (core dumped) This is bad, a guest should ideally never be able to kill QEMU like this. Now, according to the "Intergrator/CP User Guide" from: https://developer.arm.com/documentation/dui0159/b/porting-integrator-ap-and-im-pd1/registers "The Integrator/AP CM_LMBUSCNT has been removed." That means this register does not seem to be implemented on real CP boards at all, only for older AP boards. Thus it should be fine if we simply ignore this register in QEMU and handle it like all other unimplemented registers in the "default" handler of the case statement. Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3407 Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20260420064933.64765-1-thuth@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/integratorcp.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/hw/arm/integratorcp.c b/hw/arm/integratorcp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/integratorcp.c +++ b/hw/arm/integratorcp.c @@ -XXX,XX +XXX,XX @@ static uint64_t integratorcm_read(void *opaque, hwaddr offset, } else { return s->cm_lock; } - case 6: /* CM_LMBUSCNT */ - /* ??? High frequency timer. */ - hw_error("integratorcm_read: CM_LMBUSCNT"); case 7: /* CM_AUXOSC */ return s->cm_auxosc; case 8: /* CM_SDRAM */ -- 2.43.0 include/hw/arm/primecell.h used to be more expansive, but now the only thing it defines is the ARM_SYSCTL_GPIO_* constants for the GPIO lines for the arm-sysctl system-control device used on the Realview, Versatile and Versatile Express boards. Replace it with a header file specific to that device. virt.c and vmapple.c included primecell.h despite not using the constants it defined; there we can simply drop the include entirely. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20260416172627.690396-1-peter.maydell@linaro.org --- MAINTAINERS | 2 +- hw/arm/realview.c | 2 +- hw/arm/vexpress.c | 2 +- hw/arm/virt.c | 1 - hw/misc/arm_sysctl.c | 2 +- hw/vmapple/vmapple.c | 1 - include/hw/arm/primecell.h | 12 ------------ include/hw/misc/arm_sysctl.h | 16 ++++++++++++++++ 8 files changed, 20 insertions(+), 18 deletions(-) delete mode 100644 include/hw/arm/primecell.h create mode 100644 include/hw/misc/arm_sysctl.h diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/ssi/pl022.c F: include/hw/ssi/pl022.h F: hw/rtc/pl031.c F: include/hw/rtc/pl031.h -F: include/hw/arm/primecell.h F: hw/timer/cmsdk-apb-timer.c F: include/hw/timer/cmsdk-apb-timer.h F: tests/qtest/cmsdk-apb-timer-test.c @@ -XXX,XX +XXX,XX @@ F: hw/*/versatile* F: hw/i2c/arm_sbcon_i2c.c F: include/hw/i2c/arm_sbcon_i2c.h F: hw/misc/arm_sysctl.c +F: include/hw/misc/arm_sysctl.h F: docs/system/arm/versatile.rst Virt diff --git a/hw/arm/realview.c b/hw/arm/realview.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/realview.c +++ b/hw/arm/realview.c @@ -XXX,XX +XXX,XX @@ #include "target/arm/cpu.h" #include "hw/core/sysbus.h" #include "hw/arm/boot.h" -#include "hw/arm/primecell.h" #include "hw/arm/machines-qom.h" #include "hw/core/split-irq.h" +#include "hw/misc/arm_sysctl.h" #include "hw/net/lan9118.h" #include "hw/net/smc91c111.h" #include "hw/pci/pci.h" diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/vexpress.c +++ b/hw/arm/vexpress.c @@ -XXX,XX +XXX,XX @@ #include "qemu/datadir.h" #include "hw/core/sysbus.h" #include "hw/arm/boot.h" -#include "hw/arm/primecell.h" #include "hw/arm/machines-qom.h" +#include "hw/misc/arm_sysctl.h" #include "hw/net/lan9118.h" #include "hw/i2c/i2c.h" #include "net/net.h" diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ #include "monitor/qdev.h" #include "hw/core/sysbus.h" #include "hw/arm/boot.h" -#include "hw/arm/primecell.h" #include "hw/arm/virt.h" #include "hw/arm/machines-qom.h" #include "hw/block/flash.h" diff --git a/hw/misc/arm_sysctl.c b/hw/misc/arm_sysctl.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/arm_sysctl.c +++ b/hw/misc/arm_sysctl.c @@ -XXX,XX +XXX,XX @@ #include "system/runstate.h" #include "qemu/bitops.h" #include "hw/core/sysbus.h" +#include "hw/misc/arm_sysctl.h" #include "migration/vmstate.h" -#include "hw/arm/primecell.h" #include "qemu/log.h" #include "qemu/module.h" #include "qom/object.h" diff --git a/hw/vmapple/vmapple.c b/hw/vmapple/vmapple.c index XXXXXXX..XXXXXXX 100644 --- a/hw/vmapple/vmapple.c +++ b/hw/vmapple/vmapple.c @@ -XXX,XX +XXX,XX @@ #include "hw/core/sysbus.h" #include "hw/usb/usb.h" #include "hw/arm/boot.h" -#include "hw/arm/primecell.h" #include "hw/char/pl011.h" #include "hw/intc/arm_gic.h" #include "hw/intc/arm_gicv3_common.h" diff --git a/include/hw/arm/primecell.h b/include/hw/arm/primecell.h deleted file mode 100644 index XXXXXXX..XXXXXXX --- a/include/hw/arm/primecell.h +++ /dev/null @@ -XXX,XX +XXX,XX @@ -#ifndef PRIMECELL_H -#define PRIMECELL_H - -/* Declarations for ARM PrimeCell based periperals. */ -/* Also includes some devices that are currently only used by the - ARM boards. */ - -/* arm_sysctl GPIO lines */ -#define ARM_SYSCTL_GPIO_MMC_WPROT 0 -#define ARM_SYSCTL_GPIO_MMC_CARDIN 1 - -#endif diff --git a/include/hw/misc/arm_sysctl.h b/include/hw/misc/arm_sysctl.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/arm_sysctl.h @@ -XXX,XX +XXX,XX @@ +/* + * Status and system control registers for ARM RealView/Versatile boards. + * + * Copyright (c) Linaro Ltd + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#ifndef HW_MISC_ARM_SYSCTL_H +#define HW_MISC_ARM_SYSCTL_H + +/* arm_sysctl inbound GPIO lines */ +#define ARM_SYSCTL_GPIO_MMC_WPROT 0 +#define ARM_SYSCTL_GPIO_MMC_CARDIN 1 + +#endif -- 2.43.0 If we create a normally-AArch64 CPU and configure it with aarch64=off, this will by default leave all the AArch64 ID register values in its ARMISARegisters struct untouched. That in turn means that tests of cpu_isar_feature(aa64_something, cpu) will return true. Until now we have had a design policy that you shouldn't check an aa64_ feature unless you know that the CPU has AArch64; but this is quite fragile as it's easy to forget and only causes a problem in the corner case where AArch64 was turned off. In particular, when we extend the ability to disable AArch64 from only KVM to also TCG there are many more aa64 feature check points which we would otherwise have to audit for whether they needed to be guarded with a check on ARM_FEATURE_AARCH64. Instead, make the CPU realize function zero out all the 64-bit ID registers if a TCG CPU doesn't have AArch64; this will make aa64_ feature tests generally return false. We only do this for TCG because only TCG really needs it, and for KVM it might be confusing to have QEMU's idea of the ID registers be different from KVM's. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260416165353.589569-2-peter.maydell@linaro.org --- target/arm/cpu.c | 35 +++++++++++++++++++++++++++++++++++ target/arm/cpu.h | 3 ++- 2 files changed, 37 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ void arm_cpu_finalize_features(ARMCPU *cpu, Error **errp) } } +static void arm_clear_aarch64_idregs(ARMCPU *cpu) +{ + /* Zero out all the AArch64 ID registers in ARMISARegisters */ + SET_IDREG(&cpu->isar, ID_AA64ISAR0, 0); + SET_IDREG(&cpu->isar, ID_AA64ISAR1, 0); + SET_IDREG(&cpu->isar, ID_AA64ISAR2, 0); + SET_IDREG(&cpu->isar, ID_AA64PFR0, 0); + SET_IDREG(&cpu->isar, ID_AA64PFR1, 0); + SET_IDREG(&cpu->isar, ID_AA64PFR2, 0); + SET_IDREG(&cpu->isar, ID_AA64MMFR0, 0); + SET_IDREG(&cpu->isar, ID_AA64MMFR1, 0); + SET_IDREG(&cpu->isar, ID_AA64MMFR2, 0); + SET_IDREG(&cpu->isar, ID_AA64MMFR3, 0); + SET_IDREG(&cpu->isar, ID_AA64DFR0, 0); + SET_IDREG(&cpu->isar, ID_AA64DFR1, 0); + SET_IDREG(&cpu->isar, ID_AA64AFR0, 0); + SET_IDREG(&cpu->isar, ID_AA64AFR1, 0); + SET_IDREG(&cpu->isar, ID_AA64ZFR0, 0); + SET_IDREG(&cpu->isar, ID_AA64SMFR0, 0); +} + static void arm_cpu_realizefn(DeviceState *dev, Error **errp) { CPUState *cs = CPU(dev); @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) } #endif + /* + * A TCG aarch64=off CPU has no AArch64 at all, so we clear out the + * ID registers to avoid cpu_isar_feature(aa64_something, cpu) tests + * incorrectly returning true. We don't do this for other accelerators + * (which in practice means "for KVM", since no others have AArch32 + * guest support) because from KVM's point of view the AArch64 ID + * registers still exist and must have their correct values. So we + * avoid clearing them out so that we don't have QEMU and KVM with + * different ideas of the ID registers. + */ + if (tcg_enabled() && !arm_feature(env, ARM_FEATURE_AARCH64)) { + arm_clear_aarch64_idregs(cpu); + } + #ifdef CONFIG_USER_ONLY /* * User mode relies on IC IVAU instructions to catch modification of diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ArchCPU { * Note that if you add an ID register to the ARMISARegisters struct * you need to also update the 32-bit and 64-bit versions of the * kvm_arm_get_host_cpu_features() function to correctly populate the - * field by reading the value from the KVM vCPU. + * field by reading the value from the KVM vCPU. If it is an AArch64 + * ID register then you also must update arm_clear_aarch64_idregs(). */ struct ARMISARegisters { uint32_t mvfr0; -- 2.43.0 Allow the 'aarch64=off' property, which is currently KVM-only, to be set for TCG CPUs also. Note that we don't permit it on the qemu-aarch64 user-mode binary: this makes no sense as that executable can only handle AArch64 syscalls (and it would also assert at startup since it doesn't compile in the A32-specific GDB xml files like arm-neon.xml). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Clément Chigot <chigot@adacore.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20260416165353.589569-3-peter.maydell@linaro.org --- docs/system/arm/cpu-features.rst | 10 +++++---- target/arm/cpu-features.h | 5 +++++ target/arm/cpu.c | 36 ++++++++++++++++++++++++++++---- tests/qtest/arm-cpu-features.c | 8 ++----- 4 files changed, 45 insertions(+), 14 deletions(-) diff --git a/docs/system/arm/cpu-features.rst b/docs/system/arm/cpu-features.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/cpu-features.rst +++ b/docs/system/arm/cpu-features.rst @@ -XXX,XX +XXX,XX @@ not implement ARMv8-A, will not have the ``aarch64`` CPU property. QEMU's support may be limited for some CPU features, only partially supporting the feature or only supporting the feature under certain configurations. For example, the ``aarch64`` CPU feature, which, when -disabled, enables the optional AArch32 CPU feature, is only supported -when using the KVM accelerator and when running on a host CPU type that -supports the feature. While ``aarch64`` currently only works with KVM, -it could work with TCG. CPU features that are specific to KVM are +disabled, enables the optional AArch32 CPU feature, can only be set to +``off`` on the TCG and KVM accelerators, and it cannot be set to +``off`` under KVM unless running on a host CPU type that supports +running guests in AArch32. + +CPU features that are inherently specific to KVM are prefixed with "kvm-" and are described in "KVM VCPU Features". CPU Feature Probing diff --git a/target/arm/cpu-features.h b/target/arm/cpu-features.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu-features.h +++ b/target/arm/cpu-features.h @@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa64_aa32_el2(const ARMISARegisters *id) return FIELD_EX64_IDREG(id, ID_AA64PFR0, EL2) >= 2; } +static inline bool isar_feature_aa64_aa32_el3(const ARMISARegisters *id) +{ + return FIELD_EX64_IDREG(id, ID_AA64PFR0, EL3) >= 2; +} + static inline bool isar_feature_aa64_ras(const ARMISARegisters *id) { return FIELD_EX64_IDREG(id, ID_AA64PFR0, RAS) != 0; diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void aarch64_cpu_set_aarch64(Object *obj, bool value, Error **errp) * uniform execution state like do_interrupt. */ if (value == false) { - if (!kvm_enabled() || !kvm_arm_aarch32_supported()) { - error_setg(errp, "'aarch64' feature cannot be disabled " - "unless KVM is enabled and 32-bit EL1 " - "is supported"); + if (kvm_enabled()) { + if (!kvm_arm_aarch32_supported()) { + error_setg(errp, "'aarch64' feature cannot be disabled for KVM " + "because this host does not support 32-bit EL1"); + return; + } + } else if (tcg_enabled()) { +#ifdef CONFIG_USER_ONLY + error_setg(errp, "'aarch64' feature cannot be disabled for " + "usermode emulator qemu-aarch64; use qemu-arm instead"); + return; +#else + bool aa32_at_highest_el; + if (arm_feature(&cpu->env, ARM_FEATURE_EL3)) { + aa32_at_highest_el = cpu_isar_feature(aa64_aa32_el3, cpu); + } else if (arm_feature(&cpu->env, ARM_FEATURE_EL2)) { + aa32_at_highest_el = cpu_isar_feature(aa64_aa32_el2, cpu); + } else { + aa32_at_highest_el = cpu_isar_feature(aa64_aa32_el1, cpu); + } + + if (!aa32_at_highest_el) { + error_setg(errp, "'aarch64' feature cannot be disabled for " + "this TCG CPU because it does not support 32-bit " + "execution at its highest implemented exception " + "level"); + return; + } +#endif + } else { + error_setg(errp, "'aarch64' feature cannot be disabled for " + "this accelerator"); return; } unset_feature(&cpu->env, ARM_FEATURE_AARCH64); diff --git a/tests/qtest/arm-cpu-features.c b/tests/qtest/arm-cpu-features.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/arm-cpu-features.c +++ b/tests/qtest/arm-cpu-features.c @@ -XXX,XX +XXX,XX @@ static void test_query_cpu_model_expansion(const void *data) sve_tests_default(qts, "max"); pauth_tests_default(qts, "max"); - /* Test that features that depend on KVM generate errors without. */ - assert_error(qts, "max", - "'aarch64' feature cannot be disabled " - "unless KVM is enabled and 32-bit EL1 " - "is supported", - "{ 'aarch64': false }"); + /* TCG allows us to turn off AArch64 on the 'max' CPU type */ + assert_set_feature(qts, "max", "aarch64", false); } qtest_quit(qts); -- 2.43.0 Add a basic test of the TCG 'aarch64=off' functionality; this is the same as our existing arm/test_virt test, but it runs the AArch32 guest kernel on qemu-system-aarch64 with -cpu max,aarch64=off. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20260416165353.589569-4-peter.maydell@linaro.org --- tests/functional/aarch64/meson.build | 1 + .../aarch64/test_virt_aarch64_off.py | 37 +++++++++++++++++++ 2 files changed, 38 insertions(+) create mode 100755 tests/functional/aarch64/test_virt_aarch64_off.py diff --git a/tests/functional/aarch64/meson.build b/tests/functional/aarch64/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/functional/aarch64/meson.build +++ b/tests/functional/aarch64/meson.build @@ -XXX,XX +XXX,XX @@ tests_aarch64_system_thorough = [ 'tcg_plugins', 'tuxrun', 'virt', + 'virt_aarch64_off', 'virt_gpu', 'virt_vbsa', 'xen', diff --git a/tests/functional/aarch64/test_virt_aarch64_off.py b/tests/functional/aarch64/test_virt_aarch64_off.py new file mode 100755 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/functional/aarch64/test_virt_aarch64_off.py @@ -XXX,XX +XXX,XX @@ +#!/usr/bin/env python3 +# +# Functional test that boots an AArch32 Linux kernel and checks the console +# on a TCG aarch64 CPU with aarch64=off. This is the same image etc +# as we use in tests/functional/arm/test_virt.py. +# +# SPDX-License-Identifier: GPL-2.0-or-later + +from qemu_test import LinuxKernelTest, Asset + +class ArmVirtMachine(LinuxKernelTest): + + ASSET_KERNEL = Asset( + ('https://archives.fedoraproject.org/pub/archive/fedora/linux/' + 'releases/29/Everything/armhfp/os/images/pxeboot/vmlinuz'), + '18dd5f1a9a28bd539f9d047f7c0677211bae528e8712b40ca5a229a4ad8e2591') + + def test_arm_virt(self): + self.set_machine('virt') + # KVM aarch64=off requires a host CPU that supports it, so + # restrict the test to TCG only + self.require_accelerator('tcg') + self.vm.add_args('-cpu', 'max,aarch64=off') + + kernel_path = self.ASSET_KERNEL.fetch() + + self.vm.set_console() + kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE + + 'console=ttyAMA0') + self.vm.add_args('-kernel', kernel_path, + '-append', kernel_command_line) + self.vm.launch() + console_pattern = 'Kernel command line: %s' % kernel_command_line + self.wait_for_console_pattern(console_pattern) + +if __name__ == '__main__': + LinuxKernelTest.main() -- 2.43.0 From: Eric Auger <eric.auger@redhat.com> We introduce a datatype for a tolerance with respect to a given cpreg migration issue. The tolerance applies to a given cpreg kvm index, and can be of different types: a) mismatch in cpreg indexes - ToleranceNotOnBothEnds (cpreg index is allowed to be only present on one end) - ToleranceOnlySrcTestValue (cpreg index is allowed to be only present in source if its value @mask field matches @value) b) mismatch in cpreg values - ToleranceDiffInMask (value differences are allowed only within a mask) - ToleranceFieldLT (incoming field value must be less than a given value) - ToleranceFieldGT (incoming field value must be greater than a given value) A QLIST of such tolerances can be populated using a new helper: arm_register_cpreg_mig_tolerance() and arm_cpu_match_cpreg_mig_tolerance() allows to check whether a tolerance exists for a given kvm index and its criterion is matched. callers for those helpers will be introduced in subsequent patches. Only registration of migration tolerances related to cpreg index mismatch is currently allowed. Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-id: 20260420140552.104369-2-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 82 ++++++++++++++++++++++++++++++++++++++++++ target/arm/cpu.h | 1 + target/arm/internals.h | 54 ++++++++++++++++++++++++++++ 3 files changed, 137 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ void arm_register_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook, QLIST_INSERT_HEAD(&cpu->el_change_hooks, entry, node); } +static ARMCPRegMigTolerance *find_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx) +{ + ARMCPRegMigTolerance *t; + QLIST_FOREACH(t, &cpu->cpreg_mig_tolerances, node) { + if (t->kvmidx == kvmidx) { + return t; + } + } + return NULL; +} + +void arm_register_cpreg_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx, + uint64_t mask, uint64_t value, + ARMCPRegMigToleranceType type) +{ + ARMCPRegMigTolerance *entry; + + /* make sure the kvmidx has not tolerance already registered */ + assert(!find_mig_tolerance(cpu, kvmidx)); + + assert(type == ToleranceNotOnBothEnds || + type == ToleranceOnlySrcTestValue); + + entry = g_new0(ARMCPRegMigTolerance, 1); + + entry->kvmidx = kvmidx; + entry->mask = mask; + entry->value = value; + entry->type = type; + + QLIST_INSERT_HEAD(&cpu->cpreg_mig_tolerances, entry, node); +} + +bool arm_cpu_match_cpreg_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx, + uint64_t vmstate_value, uint64_t local_value, + ARMCPRegMigToleranceType type) +{ + ARMCPRegMigTolerance *t = find_mig_tolerance(cpu, kvmidx); + uint64_t diff, diff_outside_mask, field; + + if (!t || t->type != type) { + return false; + } + + if (type == ToleranceNotOnBothEnds) { + return true; + } + + if (type == ToleranceOnlySrcTestValue && + ((vmstate_value & t->mask) == t->value)) { + return true; + } + + /* Need to check the mask */ + diff = vmstate_value ^ local_value; + diff_outside_mask = diff & ~t->mask; + + if (diff_outside_mask) { + /* there are differences outside of the mask */ + return false; + } + if (type == ToleranceDiffInMask) { + /* differences only in the field, tolerance matched */ + return true; + } + /* need to compare field value against authorized ones */ + field = vmstate_value & t->mask; + if (type == ToleranceFieldLT && (field < t->value)) { + return true; + } + if (type == ToleranceFieldGT && (field > t->value)) { + return true; + } + return false; +} + static void cp_reg_reset(gpointer key, gpointer value, gpointer opaque) { /* Reset a single ARMCPRegInfo register */ @@ -XXX,XX +XXX,XX @@ static void arm_cpu_initfn(Object *obj) QLIST_INIT(&cpu->pre_el_change_hooks); QLIST_INIT(&cpu->el_change_hooks); + QLIST_INIT(&cpu->cpreg_mig_tolerances); #ifdef CONFIG_USER_ONLY # ifdef TARGET_AARCH64 @@ -XXX,XX +XXX,XX @@ static void arm_cpu_finalizefn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); ARMELChangeHook *hook, *next; + ARMCPRegMigTolerance *t, *n; g_hash_table_destroy(cpu->cp_regs); @@ -XXX,XX +XXX,XX @@ static void arm_cpu_finalizefn(Object *obj) QLIST_REMOVE(hook, node); g_free(hook); } + QLIST_FOREACH_SAFE(t, &cpu->cpreg_mig_tolerances, node, n) { + QLIST_REMOVE(t, node); + g_free(t); + } #ifndef CONFIG_USER_ONLY if (cpu->pmu_timer) { timer_free(cpu->pmu_timer); diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ArchCPU { QLIST_HEAD(, ARMELChangeHook) pre_el_change_hooks; QLIST_HEAD(, ARMELChangeHook) el_change_hooks; + QLIST_HEAD(, ARMCPRegMigTolerance) cpreg_mig_tolerances; int32_t node_id; /* NUMA node this CPU belongs to */ diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ int compare_u64(const void *a, const void *b); /* Used in FEAT_MEC to set the MECIDWidthm1 field in the MECIDR_EL2 register. */ #define MECID_WIDTH 16 +typedef enum { + ToleranceNotOnBothEnds, + ToleranceOnlySrcTestValue, + ToleranceDiffInMask, + ToleranceFieldLT, + ToleranceFieldGT, +} ARMCPRegMigToleranceType; + +typedef struct ARMCPRegMigTolerance { + uint64_t kvmidx; + uint64_t mask; + uint64_t value; + ARMCPRegMigToleranceType type; + QLIST_ENTRY(ARMCPRegMigTolerance) node; +} ARMCPRegMigTolerance; + +/** + * arm_register_cpreg_mig_tolerance: + * Register a migration tolerance wrt one given cpreg identified by its + * @kvmidx. Calling this function twice for the same @kvmidx is a + * programming error and will cause an assertion failure. + * + * @cpu: vcpu to apply the migration tolerance on + * @kvmidx: kvm index of the cpreg the tolerance applies to + * @mask: bitmask where a difference is tolerated + * (relevant with ToleranceDiffInMask) + * @value: value the bitmask field is compared with + * (relevant with ToleranceFieldLT and ToleranceFieldGT) + * @type: type of the migration tolerance: + * - ToleranceNotOnBothEnds (cpreg index is allowed to be only present + * on one end) + * - ToleranceOnlySrcTestValue (cpreg index is allowed to be only + * present in source if its value @mask field matches @value) + * - ToleranceDiffInMask (mismatch in cpreg values are only tolerated + * if differences are within @mask) + * - ToleranceFieldLT (mismatch in cpreg values are only tolerated + * if incoming @bitmask field value is less than @value) + * - ToleranceFieldGT (mismatch in cpreg values are only tolerated + * if incoming @bitmask field value is greater than @value) + */ +void arm_register_cpreg_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx, + uint64_t mask, uint64_t value, + ARMCPRegMigToleranceType type); + +/** + * arm_cpu_match_cpreg_mig_tolerance: + * Check whether a tolerance of type @type exists for a given @kvmidx + * and the tolerance criterion is satisfied + */ +bool arm_cpu_match_cpreg_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx, + uint64_t vmstate_value, uint64_t local_value, + ARMCPRegMigToleranceType type); + + #endif -- 2.43.0 From: Eric Auger <eric.auger@redhat.com> If there is a mismatch between the cpreg indexes found on both ends, check whether a tolerance was registered for the given kvmidx. If any, silence warning/errors. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20260420140552.104369-3-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/machine.c | 21 +++++++++++++++------ target/arm/trace-events | 2 ++ 2 files changed, 17 insertions(+), 6 deletions(-) diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static void handle_cpreg_missing_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx { g_autofree gchar *name = print_register_name(kvmidx); + if (arm_cpu_match_cpreg_mig_tolerance(cpu, kvmidx, + 0, 0, ToleranceNotOnBothEnds)) { + trace_tolerate_cpreg_missing_in_incoming_stream(name); + return; + } warn_report("%s: %s " "expected by the destination but not in the incoming stream: " "skip it", __func__, name); } /* - * Handle the situation where @kvmidx is in the incoming stream - * but not on destination. This currently fails the migration but - * we plan to accomodate some exceptions, hence the boolean returned value. + * Handle the situation where @kvmidx is in the incoming + * stream but not on destination. This fails the migration if + * no cpreg mig tolerance is matched for this @kvmidx + * Return true if the migration should eventually fail */ static bool handle_cpreg_only_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx) { g_autofree gchar *name = print_register_name(kvmidx); - bool fail = true; + if (arm_cpu_match_cpreg_mig_tolerance(cpu, kvmidx, + 0, 0, ToleranceNotOnBothEnds)) { + trace_tolerate_cpreg_only_in_incoming_stream(name); + return false; + } error_report("%s: %s in the incoming stream but unknown on the " "destination: fail migration", __func__, name); - - return fail; + return true; } static int cpu_post_load(void *opaque, int version_id) diff --git a/target/arm/trace-events b/target/arm/trace-events index XXXXXXX..XXXXXXX 100644 --- a/target/arm/trace-events +++ b/target/arm/trace-events @@ -XXX,XX +XXX,XX @@ arm_psci_call(uint64_t x0, uint64_t x1, uint64_t x2, uint64_t x3, uint32_t cpuid # machine.c cpu_post_load(uint32_t cpreg_vmstate_array_len, uint32_t cpreg_array_len) "cpreg_vmstate_array_len=%d cpreg_array_len=%d" +tolerate_cpreg_missing_in_incoming_stream(char *name) "%s is missing in incoming stream but this is explicitly tolerated" +tolerate_cpreg_only_in_incoming_stream(char *name) "%s is in incoming stream but not on destination but this is explicitly tolerated" -- 2.43.0 From: Eric Auger <eric.auger@redhat.com> Pass the value of the incoming register to handle_cpreg_only_in_incoming_stream and check whether there is a matching ToleranceOnlySrcTestValue tolerance. Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-id: 20260420140552.104369-4-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/machine.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static void handle_cpreg_missing_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx * no cpreg mig tolerance is matched for this @kvmidx * Return true if the migration should eventually fail */ -static bool handle_cpreg_only_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx) +static bool +handle_cpreg_only_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx, uint64_t value) { g_autofree gchar *name = print_register_name(kvmidx); if (arm_cpu_match_cpreg_mig_tolerance(cpu, kvmidx, - 0, 0, ToleranceNotOnBothEnds)) { + 0, 0, ToleranceNotOnBothEnds) || + arm_cpu_match_cpreg_mig_tolerance(cpu, kvmidx, + value, 0, ToleranceOnlySrcTestValue)) { trace_tolerate_cpreg_only_in_incoming_stream(name); return false; } @@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id) } if (cpu->cpreg_vmstate_indexes[v] < cpu->cpreg_indexes[i]) { fail = handle_cpreg_only_in_incoming_stream(cpu, - cpu->cpreg_vmstate_indexes[v++]); + cpu->cpreg_vmstate_indexes[v], + cpu->cpreg_vmstate_values[v]); + v++; continue; } /* matching register, copy the value over */ @@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id) */ for ( ; v < cpu->cpreg_vmstate_array_len; v++) { fail = handle_cpreg_only_in_incoming_stream(cpu, - cpu->cpreg_vmstate_indexes[v]); + cpu->cpreg_vmstate_indexes[v], + cpu->cpreg_vmstate_values[v]); } if (fail) { return -1; -- 2.43.0 From: Eric Auger <eric.auger@redhat.com> Before linux v6.13 those registers were erroneously unconditionally exposed and this was fixed by commits: - 0fcb4eea5345 ("KVM: arm64: Hide TCR2_EL1 from userspace when disabled for guests") - a68cddbe47ef ("KVM: arm64: Hide S1PIE registers from userspace when disabled for guests") in v6.13. This means if we migrate from an old kernel host to a >= 6.13 kernel host, migration currently fails. Declare cpreg migration tolerance for those registers. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Sebastian Ott <sebott@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20260420140552.104369-5-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu64.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_a53_initfn(Object *obj) define_cortex_a72_a57_a53_cp_reginfo(cpu); } +#if defined(CONFIG_KVM) +static void kvm_arm_set_cpreg_mig_tolerances(ARMCPU *cpu) +{ + /* + * Registers that may be in the incoming stream and not exposed + * on the destination + */ + + /* + * TCR_EL1 was erroneously unconditionnally exposed before linux v6.13. + * See commit 0fcb4eea5345 ("KVM: arm64: Hide TCR2_EL1 from userspace + * when disabled for guests") + */ + arm_register_cpreg_mig_tolerance(cpu, ARM64_SYS_REG(3, 0, 2, 0, 3), + 0, 0, ToleranceNotOnBothEnds); + /* + * PIRE0_EL1 and PIR_EL1 were erroneously unconditionnally exposed + * before linux v6.13. See commit a68cddbe47ef ("KVM: arm64: Hide + * S1PIE registers from userspace when disabled for guests") + */ + arm_register_cpreg_mig_tolerance(cpu, ARM64_SYS_REG(3, 0, 10, 2, 2), + 0, 0, ToleranceNotOnBothEnds); + arm_register_cpreg_mig_tolerance(cpu, ARM64_SYS_REG(3, 0, 10, 2, 3), + 0, 0, ToleranceNotOnBothEnds); +} +#endif + static void aarch64_host_initfn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); @@ -XXX,XX +XXX,XX @@ static void aarch64_host_initfn(Object *obj) #endif #if defined(CONFIG_KVM) + kvm_arm_set_cpreg_mig_tolerances(cpu); kvm_arm_set_cpu_features_from_host(cpu); aarch64_add_sve_properties(obj); #elif defined(CONFIG_HVF) -- 2.43.0 From: Eric Auger <eric.auger@redhat.com> KVM_REG_ARM_VENDOR_HYP_BMAP_2 pseudo FW register is exposed from v6.15 onwards. Backward migration from a >= v6.15 to an older kernel would fail without cpreg migration tolerance definition for this register. If the register is present on source but not on destination, its value must be checked to make sure it matches the reset value, ie. 0, meaning no service is exposed to the guest, hence the choice of a ToleranceOnlySrcTestValue migration tolerance. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20260420140552.104369-6-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu64.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void kvm_arm_set_cpreg_mig_tolerances(ARMCPU *cpu) 0, 0, ToleranceNotOnBothEnds); arm_register_cpreg_mig_tolerance(cpu, ARM64_SYS_REG(3, 0, 10, 2, 3), 0, 0, ToleranceNotOnBothEnds); + + /* + * KVM_REG_ARM_VENDOR_HYP_BMAP_2 pseudo FW register is exposed + * from v6.15 onwards. Backward migration from a >= v6.15 to an older + * kernel would fail without cpreg migration tolerance definition. + * If the register is present on source but not on destination, make + * sure it has its reset value, ie. 0, meaning no service is exposed + * to the guest. + */ + arm_register_cpreg_mig_tolerance(cpu, KVM_REG_ARM_FW_FEAT_BMAP_REG(3), + UINT64_MAX, 0, ToleranceOnlySrcTestValue); } #endif -- 2.43.0 From: Eric Auger <eric.auger@redhat.com> We want to remove AArch32 DBGDTRTX which was erroneously exposed. This was attempted by 655659a74a36b ("target/arm: Correct encoding of Debug Communications Channel registers") but it was discovered that the removal of this debug register broke forward migration on TCG. Now we have the cpreg migration tolerance infrastructure, we can declare one for the DBGDTRTX. This allow to revert the reinstate patch. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Sebastian Ott <sebott@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20260420140552.104369-7-eric.auger@redhat.com [PMM: revised comment, included note about when we can drop the workaround] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .fgt = FGT_CLIDR_EL1, .resetvalue = GET_IDREG(isar, CLIDR) }; + uint64_t dbgtr_el0_kvmidx = + cpreg_to_kvm_id(ENCODE_CP_REG(14, 0, 1, 0, 5, 3, 0)); + define_one_arm_cp_reg(cpu, &clidr); define_arm_cp_regs(cpu, v7_cp_reginfo); define_debug_regs(cpu); + /* + * We used to incorrectly expose a non-existent AArch32 "DBGDTRTX" + * register with this encoding. This has been fixed by commit + * 655659a74a36 ("target/arm: Correct encoding of Debug + * Communications Channel registers") by the introduction of correct + * separate cpreg definitions for AA64 and AA32 versions. However, + * the old cpreg definition couldn't be removed without breaking + * migration, so commit 4f2b82f604 reinstated the bogus encoding + * for migration data only. + * + * Now that we have migration tolerance infrastructure, we can use + * this to allow forward migration from the buggy QEMU versions, + * accepting and ignoring the bogus register if it is in the + * source data. QEMU 11.0 was the last version that sent the + * bogus encoding, so this workaround can be removed at the point + * where we no longer care about migration from that version + * (i.e. when we remove the "virt-11.0" machine type). + */ + arm_register_cpreg_mig_tolerance(cpu, dbgtr_el0_kvmidx, + 0, 0, ToleranceNotOnBothEnds); } else { define_arm_cp_regs(cpu, not_v7_cp_reginfo); } -- 2.43.0 From: Eric Auger <eric.auger@redhat.com> This reverts commit 4f2b82f60431 ("target/arm: Reinstate bogus AArch32 DBGDTRTX register for migration compat). We don't need that commit anymore as the AArch32 DBGDTRTX register is declared to be safe to ignore in the incoming migration stream. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Sebastian Ott <sebott@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20260420140552.104369-8-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/debug_helper.c | 29 ----------------------------- 1 file changed, 29 deletions(-) diff --git a/target/arm/debug_helper.c b/target/arm/debug_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/debug_helper.c +++ b/target/arm/debug_helper.c @@ -XXX,XX +XXX,XX @@ static void dbgclaimclr_write(CPUARMState *env, const ARMCPRegInfo *ri, env->cp15.dbgclaim &= ~(value & 0xFF); } -static CPAccessResult access_bogus(CPUARMState *env, const ARMCPRegInfo *ri, - bool isread) -{ - /* Always UNDEF, as if this cpreg didn't exist */ - return CP_ACCESS_UNDEFINED; -} - static const ARMCPRegInfo debug_cp_reginfo[] = { /* * DBGDRAR, DBGDSAR: always RAZ since we don't implement memory mapped @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo debug_cp_reginfo[] = { .opc0 = 2, .opc1 = 3, .crn = 0, .crm = 4, .opc2 = 0, .access = PL0_RW, .accessfn = access_tdcc, .type = ARM_CP_CONST, .resetvalue = 0 }, - /* - * This is not a real AArch32 register. We used to incorrectly expose - * this due to a QEMU bug; to avoid breaking migration compatibility we - * need to continue to provide it so that we don't fail the inbound - * migration when it tells us about a sysreg that we don't have. - * We set an always-fails .accessfn, which means that the guest doesn't - * actually see this register (it will always UNDEF, identically to if - * there were no cpreg definition for it other than that we won't print - * a LOG_UNIMP message about it), and we set the ARM_CP_NO_GDB flag so the - * gdbstub won't see it either. - * (We can't just set .access = 0, because add_cpreg_to_hashtable() - * helpfully ignores cpregs which aren't accessible to the highest - * implemented EL.) - * - * TODO: implement a system for being able to describe "this register - * can be ignored if it appears in the inbound stream"; then we can - * remove this temporary hack. - */ - { .name = "BOGUS_DBGDTR_EL0", .state = ARM_CP_STATE_AA32, - .cp = 14, .opc1 = 3, .crn = 0, .crm = 5, .opc2 = 0, - .access = PL0_RW, .accessfn = access_bogus, - .type = ARM_CP_CONST | ARM_CP_NO_GDB, .resetvalue = 0 }, /* * OSECCR_EL1 provides a mechanism for an operating system * to access the contents of EDECCR. EDECCR is not implemented though, -- 2.43.0 From: Osama Abdelkader <osama.abdelkader@gmail.com> fdt_node_offset_by_compatible(fdt, -1, compat) only finds the first match. If the blob has more than one node with the same compatible string, extra nodes will remain active. Remove all the matching nodes, using the same loop as imx8mp-evk.c does for this purpose. Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com> Message-id: 20260420162114.308519-1-osama.abdelkader@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/raspi4b.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/hw/arm/raspi4b.c b/hw/arm/raspi4b.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/raspi4b.c +++ b/hw/arm/raspi4b.c @@ -XXX,XX +XXX,XX @@ static void raspi4_modify_dtb(const struct arm_boot_info *info, void *fdt) for (int i = 0; i < ARRAY_SIZE(nodes_to_remove); i++) { const char *dev_str = nodes_to_remove[i]; + int offset; - int offset = fdt_node_offset_by_compatible(fdt, -1, dev_str); - if (offset >= 0) { - if (!fdt_nop_node(fdt, offset)) { - warn_report("bcm2711 dtc: %s has been disabled!", dev_str); + offset = fdt_node_offset_by_compatible(fdt, -1, dev_str); + while (offset >= 0) { + if (fdt_nop_node(fdt, offset) == 0) { + warn_report("bcm2711 dtb: %s has been disabled!", dev_str); } + offset = fdt_node_offset_by_compatible(fdt, offset, dev_str); } } -- 2.43.0 From: Yucai Liu <1486344514@qq.com> Implement a basic i.MX6UL LCDIF controller model with MMIO registers, frame-done interrupt behavior, and framebuffer-backed display updates for RGB565 and XRGB8888 input formats. Place the LCDIF device under hw/display and build it via a dedicated CONFIG_IMX6UL_LCDIF symbol. Model register fields with registerfields.h helpers and provide migration support via vmstate. Signed-off-by: Yucai Liu <1486344514@qq.com> Message-id: 20260412110240.93116-2-yangyanglan718@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 2 + hw/display/Kconfig | 4 + hw/display/imx6ul_lcdif.c | 453 ++++++++++++++++++++++++++++++ hw/display/meson.build | 1 + include/hw/display/imx6ul_lcdif.h | 37 +++ 5 files changed, 497 insertions(+) create mode 100644 hw/display/imx6ul_lcdif.c create mode 100644 include/hw/display/imx6ul_lcdif.h diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ L: qemu-arm@nongnu.org S: Odd Fixes F: hw/arm/mcimx6ul-evk.c F: hw/arm/fsl-imx6ul.c +F: hw/display/imx6ul_lcdif.c F: hw/misc/imx6ul_ccm.c F: include/hw/arm/fsl-imx6ul.h +F: include/hw/display/imx6ul_lcdif.h F: include/hw/misc/imx6ul_ccm.h F: docs/system/arm/mcimx6ul-evk.rst diff --git a/hw/display/Kconfig b/hw/display/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/display/Kconfig +++ b/hw/display/Kconfig @@ -XXX,XX +XXX,XX @@ config PL110 bool select FRAMEBUFFER +config IMX6UL_LCDIF + bool + select FRAMEBUFFER + config SII9022 bool depends on I2C diff --git a/hw/display/imx6ul_lcdif.c b/hw/display/imx6ul_lcdif.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/display/imx6ul_lcdif.c @@ -XXX,XX +XXX,XX @@ +/* + * SPDX-License-Identifier: GPL-2.0-or-later + * + * i.MX6UL LCDIF controller + * + * Copyright (c) 2026 Yucai Liu <1486344514@qq.com> + */ + +#include "qemu/osdep.h" +#include "hw/display/imx6ul_lcdif.h" +#include "hw/core/irq.h" +#include "hw/core/registerfields.h" +#include "hw/display/framebuffer.h" +#include "migration/vmstate.h" +#include "system/address-spaces.h" +#include "qemu/module.h" +#include "qemu/units.h" +#include "ui/pixel_ops.h" + +#define LCDIF_MMIO_SIZE (16 * KiB) +#define LCDIF_RESET_CTRL1 0x000f0000 + +REG32(CTRL, 0x00) + FIELD(CTRL, RUN, 0, 1) + FIELD(CTRL, WORD_LENGTH, 8, 2) +REG32(CTRL1, 0x10) + FIELD(CTRL1, CUR_FRAME_DONE_IRQ, 9, 1) + FIELD(CTRL1, CUR_FRAME_DONE_IRQ_EN, 13, 1) + FIELD(CTRL1, BYTE_PACKING_FORMAT, 16, 4) +REG32(V4_TRANSFER_COUNT, 0x30) + FIELD(V4_TRANSFER_COUNT, H_COUNT, 0, 16) + FIELD(V4_TRANSFER_COUNT, V_COUNT, 16, 16) +REG32(V4_CUR_BUF, 0x40) +REG32(V4_NEXT_BUF, 0x50) +REG32(AS_NEXT_BUF, 0x230) + +#define REG_SET 0x4 +#define REG_CLR 0x8 +#define REG_TOG 0xc + +#define CTRL_WORD_LENGTH_16 0 +#define CTRL_WORD_LENGTH_24 3 + +#define FRAME_PERIOD_NS (16 * 1000 * 1000ULL) + +enum IMX6ULLCDIFReg { + IMX6UL_LCDIF_REG_CTRL = A_CTRL >> 4, + IMX6UL_LCDIF_REG_CTRL1 = A_CTRL1 >> 4, + IMX6UL_LCDIF_REG_V4_TRANSFER_COUNT = A_V4_TRANSFER_COUNT >> 4, + IMX6UL_LCDIF_REG_V4_CUR_BUF = A_V4_CUR_BUF >> 4, + IMX6UL_LCDIF_REG_V4_NEXT_BUF = A_V4_NEXT_BUF >> 4, + IMX6UL_LCDIF_REG_AS_NEXT_BUF = A_AS_NEXT_BUF >> 4, +}; + +static inline bool imx6ul_lcdif_reg_exists(hwaddr reg) +{ + return (reg >> 4) < IMX6UL_LCDIF_REGS_NUM; +} + +static inline bool imx6ul_lcdif_reg_has_setclr(hwaddr reg) +{ + switch (reg) { + case A_CTRL: + case A_CTRL1: + return true; + default: + return false; + } +} + +static inline bool imx6ul_lcdif_is_running(IMX6ULLCDIFState *s) +{ + uint32_t ctrl = s->regs[IMX6UL_LCDIF_REG_CTRL]; + + return FIELD_EX32(ctrl, CTRL, RUN); +} + +static inline bool imx6ul_lcdif_frame_done_pending(IMX6ULLCDIFState *s) +{ + uint32_t ctrl1 = s->regs[IMX6UL_LCDIF_REG_CTRL1]; + + return FIELD_EX32(ctrl1, CTRL1, CUR_FRAME_DONE_IRQ); +} + +static void imx6ul_lcdif_schedule_frame(IMX6ULLCDIFState *s) +{ + int64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + + timer_mod(s->frame_timer, now + FRAME_PERIOD_NS); +} + +static void imx6ul_lcdif_maybe_schedule_frame(IMX6ULLCDIFState *s) +{ + if (imx6ul_lcdif_is_running(s) && !imx6ul_lcdif_frame_done_pending(s)) { + imx6ul_lcdif_schedule_frame(s); + } else { + timer_del(s->frame_timer); + } +} + +static void imx6ul_lcdif_update_irq(IMX6ULLCDIFState *s) +{ + uint32_t ctrl1 = s->regs[IMX6UL_LCDIF_REG_CTRL1]; + bool level = FIELD_EX32(ctrl1, CTRL1, CUR_FRAME_DONE_IRQ_EN) && + FIELD_EX32(ctrl1, CTRL1, CUR_FRAME_DONE_IRQ); + + qemu_set_irq(s->irq, level); +} + +static void imx6ul_lcdif_frame_done(IMX6ULLCDIFState *s) +{ + uint32_t ctrl1 = s->regs[IMX6UL_LCDIF_REG_CTRL1]; + + ctrl1 = FIELD_DP32(ctrl1, CTRL1, CUR_FRAME_DONE_IRQ, 1); + s->regs[IMX6UL_LCDIF_REG_CTRL1] = ctrl1; + imx6ul_lcdif_update_irq(s); +} + +static void imx6ul_lcdif_draw_line_rgb565(void *opaque, uint8_t *dst, + const uint8_t *src, int width, + int dststep) +{ + uint32_t *dst32 = (uint32_t *)dst; + int i; + + for (i = 0; i < width; i++) { + uint16_t pixel = lduw_le_p(src); + uint8_t r = ((pixel >> 11) & 0x1f) << 3; + uint8_t g = ((pixel >> 5) & 0x3f) << 2; + uint8_t b = (pixel & 0x1f) << 3; + + *dst32++ = rgb_to_pixel32(r, g, b); + src += 2; + } +} + +static void imx6ul_lcdif_draw_line_xrgb8888(void *opaque, uint8_t *dst, + const uint8_t *src, int width, + int dststep) +{ + uint32_t *dst32 = (uint32_t *)dst; + int i; + + for (i = 0; i < width; i++) { + uint32_t pixel = ldl_le_p(src); + uint8_t r = (pixel >> 16) & 0xff; + uint8_t g = (pixel >> 8) & 0xff; + uint8_t b = pixel & 0xff; + + *dst32++ = rgb_to_pixel32(r, g, b); + src += 4; + } +} + +static void imx6ul_lcdif_update_display(void *opaque) +{ + IMX6ULLCDIFState *s = opaque; + DisplaySurface *surface = qemu_console_surface(s->con); + uint32_t transfer_count = s->regs[IMX6UL_LCDIF_REG_V4_TRANSFER_COUNT]; + uint32_t width = FIELD_EX32(transfer_count, V4_TRANSFER_COUNT, H_COUNT); + uint32_t height = FIELD_EX32(transfer_count, V4_TRANSFER_COUNT, V_COUNT); + uint32_t ctrl = s->regs[IMX6UL_LCDIF_REG_CTRL]; + uint32_t frame_base = s->regs[IMX6UL_LCDIF_REG_V4_CUR_BUF]; + drawfn fn; + int first = 0; + int last = 0; + int src_width; + + if (!imx6ul_lcdif_is_running(s) || width == 0 || height == 0) { + return; + } + + switch (FIELD_EX32(ctrl, CTRL, WORD_LENGTH)) { + case CTRL_WORD_LENGTH_16: + s->src_bpp = 2; + fn = imx6ul_lcdif_draw_line_rgb565; + break; + case CTRL_WORD_LENGTH_24: + s->src_bpp = 4; + fn = imx6ul_lcdif_draw_line_xrgb8888; + break; + default: + return; + } + + if (surface_width(surface) != width || surface_height(surface) != height) { + qemu_console_resize(s->con, width, height); + surface = qemu_console_surface(s->con); + s->invalidate = true; + } + + src_width = width * s->src_bpp; + if (s->invalidate || s->fb_base != frame_base || + s->src_width != src_width || s->rows != height) { + framebuffer_update_memory_section(&s->fbsection, get_system_memory(), + frame_base, height, src_width); + s->fb_base = frame_base; + s->src_width = src_width; + s->rows = height; + } + + framebuffer_update_display(surface, &s->fbsection, width, height, + src_width, surface_stride(surface), 0, + s->invalidate, fn, s, &first, &last); + if (first >= 0) { + dpy_gfx_update(s->con, 0, first, width, last - first + 1); + } + + s->invalidate = false; +} + +static void imx6ul_lcdif_invalidate_display(void *opaque) +{ + IMX6ULLCDIFState *s = opaque; + + s->invalidate = true; +} + +static const GraphicHwOps imx6ul_lcdif_graphic_ops = { + .invalidate = imx6ul_lcdif_invalidate_display, + .gfx_update = imx6ul_lcdif_update_display, +}; + +static void imx6ul_lcdif_frame_timer_cb(void *opaque) +{ + IMX6ULLCDIFState *s = opaque; + + if (!imx6ul_lcdif_is_running(s) || imx6ul_lcdif_frame_done_pending(s)) { + return; + } + + imx6ul_lcdif_frame_done(s); +} + +static uint64_t imx6ul_lcdif_read(void *opaque, hwaddr offset, unsigned size) +{ + IMX6ULLCDIFState *s = opaque; + hwaddr reg = offset & ~0xf; + uint32_t idx; + + assert(size == 4); + assert(!(offset & 0x3)); + assert(offset < LCDIF_MMIO_SIZE); + + idx = reg >> 4; + if (idx >= ARRAY_SIZE(s->regs)) { + return 0; + } + + return s->regs[idx]; +} + +static void imx6ul_lcdif_write(void *opaque, hwaddr offset, + uint64_t value, unsigned size) +{ + IMX6ULLCDIFState *s = opaque; + hwaddr reg = offset & ~0xf; + uint32_t idx; + uint32_t oldv; + + assert(size == 4); + assert(!(offset & 0x3)); + assert(offset < LCDIF_MMIO_SIZE); + + if (!imx6ul_lcdif_reg_exists(reg)) { + return; + } + + idx = reg >> 4; + oldv = s->regs[idx]; + + switch (offset & 0xf) { + case 0: + s->regs[idx] = (uint32_t)value; + break; + case REG_SET: + if (!imx6ul_lcdif_reg_has_setclr(reg)) { + return; + } + s->regs[idx] = oldv | (uint32_t)value; + break; + case REG_CLR: + if (!imx6ul_lcdif_reg_has_setclr(reg)) { + return; + } + s->regs[idx] = oldv & ~(uint32_t)value; + break; + case REG_TOG: + if (!imx6ul_lcdif_reg_has_setclr(reg)) { + return; + } + s->regs[idx] = oldv ^ (uint32_t)value; + break; + default: + g_assert_not_reached(); + } + + switch (reg) { + case A_CTRL: + if (!FIELD_EX32(oldv, CTRL, RUN) && + FIELD_EX32(s->regs[idx], CTRL, RUN)) { + s->invalidate = true; + graphic_hw_invalidate(s->con); + imx6ul_lcdif_maybe_schedule_frame(s); + break; + } + if (FIELD_EX32(oldv, CTRL, RUN) && + !FIELD_EX32(s->regs[idx], CTRL, RUN)) { + timer_del(s->frame_timer); + } + break; + case A_CTRL1: + if (FIELD_EX32(oldv, CTRL1, CUR_FRAME_DONE_IRQ) && + !FIELD_EX32(s->regs[idx], CTRL1, CUR_FRAME_DONE_IRQ)) { + imx6ul_lcdif_maybe_schedule_frame(s); + } + break; + case A_V4_TRANSFER_COUNT: + s->invalidate = true; + graphic_hw_invalidate(s->con); + break; + case A_V4_CUR_BUF: + s->invalidate = true; + graphic_hw_invalidate(s->con); + break; + case A_V4_NEXT_BUF: + s->regs[IMX6UL_LCDIF_REG_V4_CUR_BUF] = s->regs[idx]; + imx6ul_lcdif_frame_done(s); + s->invalidate = true; + graphic_hw_invalidate(s->con); + imx6ul_lcdif_maybe_schedule_frame(s); + return; + case A_AS_NEXT_BUF: + imx6ul_lcdif_frame_done(s); + imx6ul_lcdif_maybe_schedule_frame(s); + return; + default: + break; + } + + imx6ul_lcdif_update_irq(s); +} + +static const MemoryRegionOps imx6ul_lcdif_ops = { + .read = imx6ul_lcdif_read, + .write = imx6ul_lcdif_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static void imx6ul_lcdif_reset(DeviceState *dev) +{ + IMX6ULLCDIFState *s = IMX6UL_LCDIF(dev); + + memset(s->regs, 0, sizeof(s->regs)); + s->regs[IMX6UL_LCDIF_REG_CTRL1] = LCDIF_RESET_CTRL1; + s->fb_base = 0; + s->src_width = 0; + s->rows = 0; + s->src_bpp = 0; + s->invalidate = true; + timer_del(s->frame_timer); + imx6ul_lcdif_update_irq(s); +} + +static int imx6ul_lcdif_post_load(void *opaque, int version_id) +{ + IMX6ULLCDIFState *s = opaque; + + s->fb_base = 0; + s->src_width = 0; + s->rows = 0; + s->src_bpp = 0; + s->invalidate = true; + + imx6ul_lcdif_update_irq(s); + if (imx6ul_lcdif_is_running(s) && + !imx6ul_lcdif_frame_done_pending(s) && + !timer_pending(s->frame_timer)) { + imx6ul_lcdif_schedule_frame(s); + } + + return 0; +} + +static const VMStateDescription vmstate_imx6ul_lcdif = { + .name = TYPE_IMX6UL_LCDIF, + .version_id = 1, + .minimum_version_id = 1, + .post_load = imx6ul_lcdif_post_load, + .fields = (const VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, IMX6ULLCDIFState, IMX6UL_LCDIF_REGS_NUM), + VMSTATE_TIMER_PTR(frame_timer, IMX6ULLCDIFState), + VMSTATE_END_OF_LIST() + }, +}; + +static void imx6ul_lcdif_realize(DeviceState *dev, Error **errp) +{ + IMX6ULLCDIFState *s = IMX6UL_LCDIF(dev); + + s->frame_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, + imx6ul_lcdif_frame_timer_cb, s); + s->invalidate = true; + memory_region_init_io(&s->iomem, OBJECT(dev), &imx6ul_lcdif_ops, s, + TYPE_IMX6UL_LCDIF, LCDIF_MMIO_SIZE); + sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->iomem); + sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq); + s->con = graphic_console_init(dev, 0, &imx6ul_lcdif_graphic_ops, s); +} + +static void imx6ul_lcdif_unrealize(DeviceState *dev) +{ + IMX6ULLCDIFState *s = IMX6UL_LCDIF(dev); + + timer_del(s->frame_timer); + timer_free(s->frame_timer); + s->frame_timer = NULL; + + if (s->con) { + graphic_console_close(s->con); + s->con = NULL; + } +} + +static void imx6ul_lcdif_class_init(ObjectClass *klass, const void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = imx6ul_lcdif_realize; + dc->unrealize = imx6ul_lcdif_unrealize; + dc->vmsd = &vmstate_imx6ul_lcdif; + device_class_set_legacy_reset(dc, imx6ul_lcdif_reset); + dc->desc = "i.MX6UL LCDIF"; +} + +static const TypeInfo imx6ul_lcdif_info = { + .name = TYPE_IMX6UL_LCDIF, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(IMX6ULLCDIFState), + .class_init = imx6ul_lcdif_class_init, +}; + +static void imx6ul_lcdif_register_types(void) +{ + type_register_static(&imx6ul_lcdif_info); +} + +type_init(imx6ul_lcdif_register_types) diff --git a/hw/display/meson.build b/hw/display/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/display/meson.build +++ b/hw/display/meson.build @@ -XXX,XX +XXX,XX @@ system_ss.add(when: ['CONFIG_VGA_CIRRUS', 'CONFIG_VGA_ISA'], if_true: files('cir system_ss.add(when: 'CONFIG_G364FB', if_true: files('g364fb.c')) system_ss.add(when: 'CONFIG_JAZZ_LED', if_true: files('jazz_led.c')) system_ss.add(when: 'CONFIG_PL110', if_true: files('pl110.c')) +system_ss.add(when: 'CONFIG_IMX6UL_LCDIF', if_true: files('imx6ul_lcdif.c')) system_ss.add(when: 'CONFIG_SII9022', if_true: files('sii9022.c')) system_ss.add(when: 'CONFIG_SSD0303', if_true: files('ssd0303.c')) system_ss.add(when: 'CONFIG_SSD0323', if_true: files('ssd0323.c')) diff --git a/include/hw/display/imx6ul_lcdif.h b/include/hw/display/imx6ul_lcdif.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/display/imx6ul_lcdif.h @@ -XXX,XX +XXX,XX @@ +/* + * SPDX-License-Identifier: GPL-2.0-or-later + * + * i.MX6UL LCDIF controller + * + * Copyright (c) 2026 Yucai Liu <1486344514@qq.com> + */ + +#ifndef IMX6UL_LCDIF_H +#define IMX6UL_LCDIF_H + +#include "hw/core/sysbus.h" +#include "qom/object.h" +#include "qemu/timer.h" +#include "ui/console.h" + +#define TYPE_IMX6UL_LCDIF "imx6ul-lcdif" +#define IMX6UL_LCDIF_REGS_NUM ((0x230 >> 4) + 1) +OBJECT_DECLARE_SIMPLE_TYPE(IMX6ULLCDIFState, IMX6UL_LCDIF) + +struct IMX6ULLCDIFState { + SysBusDevice parent_obj; + + MemoryRegion iomem; + MemoryRegionSection fbsection; + qemu_irq irq; + QemuConsole *con; + QEMUTimer *frame_timer; + uint32_t fb_base; + uint32_t src_width; + uint32_t rows; + uint8_t src_bpp; + bool invalidate; + uint32_t regs[IMX6UL_LCDIF_REGS_NUM]; +}; + +#endif /* IMX6UL_LCDIF_H */ -- 2.43.0 From: Yucai Liu <1486344514@qq.com> Instantiate LCDIF as a child object of the i.MX6UL SoC in init and realize it in the SoC realize path before MMIO/IRQ hookup. Also make FSL_IMX6UL select CONFIG_IMX6UL_LCDIF and map the LCDIF region with a 16 KiB size to match the SoC memory map. Signed-off-by: Yucai Liu <1486344514@qq.com> Message-id: 20260412110240.93116-3-yangyanglan718@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx6ul.c | 12 ++++++++++-- include/hw/arm/fsl-imx6ul.h | 4 +++- 3 files changed, 14 insertions(+), 3 deletions(-) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX6UL imply I2C_DEVICES select A15MPCORE select IMX + select IMX6UL_LCDIF select IMX_FEC select IMX_I2C select IMX_USBPHY diff --git a/hw/arm/fsl-imx6ul.c b/hw/arm/fsl-imx6ul.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx6ul.c +++ b/hw/arm/fsl-imx6ul.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qapi/error.h" #include "hw/arm/fsl-imx6ul.h" +#include "hw/display/imx6ul_lcdif.h" #include "hw/misc/unimp.h" #include "hw/usb/imx-usb-phy.h" #include "hw/core/boards.h" @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) object_initialize_child(obj, name, &s->usb[i], TYPE_CHIPIDEA); } + /* + * LCDIF + */ + object_initialize_child(obj, "lcdif", &s->lcdif, TYPE_IMX6UL_LCDIF); + /* * SDHCIs */ @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) /* * LCD */ - create_unimplemented_device("lcdif", FSL_IMX6UL_LCDIF_ADDR, - FSL_IMX6UL_LCDIF_SIZE); + sysbus_realize(SYS_BUS_DEVICE(&s->lcdif), &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->lcdif), 0, FSL_IMX6UL_LCDIF_ADDR); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->lcdif), 0, + qdev_get_gpio_in(gic, FSL_IMX6UL_LCDIF_IRQ)); /* * CSU diff --git a/include/hw/arm/fsl-imx6ul.h b/include/hw/arm/fsl-imx6ul.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx6ul.h +++ b/include/hw/arm/fsl-imx6ul.h @@ -XXX,XX +XXX,XX @@ #include "hw/net/imx_fec.h" #include "hw/usb/chipidea.h" #include "hw/usb/imx-usb-phy.h" +#include "hw/display/imx6ul_lcdif.h" #include "system/memory.h" #include "target/arm/cpu.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct FslIMX6ULState { IMX2WdtState wdt[FSL_IMX6UL_NUM_WDTS]; IMXUSBPHYState usbphy[FSL_IMX6UL_NUM_USB_PHYS]; ChipideaState usb[FSL_IMX6UL_NUM_USBS]; + IMX6ULLCDIFState lcdif; MemoryRegion rom; MemoryRegion caam; MemoryRegion ocram; @@ -XXX,XX +XXX,XX @@ enum FslIMX6ULMemoryMap { FSL_IMX6UL_PXP_SIZE = (16 * KiB), FSL_IMX6UL_LCDIF_ADDR = 0x021C8000, - FSL_IMX6UL_LCDIF_SIZE = 0x100, + FSL_IMX6UL_LCDIF_SIZE = (16 * KiB), FSL_IMX6UL_CSI_ADDR = 0x021C4000, FSL_IMX6UL_CSI_SIZE = 0x100, -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> We have a registerfields interface which we can use for defining fields alongside helpers to access them. Define the basic syndrome layout and convert the helpers that take the imm16 data directly. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-2-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 75 ++++++++++++++++++++++++++++++++----------- 1 file changed, 57 insertions(+), 18 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ #ifndef TARGET_ARM_SYNDROME_H #define TARGET_ARM_SYNDROME_H -#include "qemu/bitops.h" +#include "hw/core/registerfields.h" /* Valid Syndrome Register EC field values */ enum arm_exception_class { @@ -XXX,XX +XXX,XX @@ enum arm_exception_class { EC_AA64_BKPT = 0x3c, }; +/* Generic syndrome encoding layout for HSR and lower 32 bits of ESR_EL2 */ +FIELD(SYNDROME, EC, 26, 6) +FIELD(SYNDROME, IL, 25, 1) +FIELD(SYNDROME, ISS, 0, 25) + typedef enum { SME_ET_AccessTrap, SME_ET_Streaming, @@ -XXX,XX +XXX,XX @@ typedef enum { static inline uint32_t syn_get_ec(uint32_t syn) { - return syn >> ARM_EL_EC_SHIFT; + return FIELD_EX32(syn, SYNDROME, EC); } static inline uint32_t syn_set_ec(uint32_t syn, uint32_t ec) { - return deposit32(syn, ARM_EL_EC_SHIFT, ARM_EL_EC_LENGTH, ec); + return FIELD_DP32(syn, SYNDROME, EC, ec); } /* @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_set_ec(uint32_t syn, uint32_t ec) */ static inline uint32_t syn_uncategorized(void) { - return (EC_UNCATEGORIZED << ARM_EL_EC_SHIFT) | ARM_EL_IL; + uint32_t res = syn_set_ec(0, EC_UNCATEGORIZED); + res = FIELD_DP32(res, SYNDROME, IL, 1); + return res; } +FIELD(ISS_IMM16, IMM16, 0, 16) + static inline uint32_t syn_aa64_svc(uint32_t imm16) { - return (EC_AA64_SVC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); + uint32_t res = syn_set_ec(0, EC_AA64_SVC); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); + return res; } static inline uint32_t syn_aa64_hvc(uint32_t imm16) { - return (EC_AA64_HVC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); + uint32_t res = syn_set_ec(0, EC_AA64_HVC); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); + return res; } static inline uint32_t syn_aa64_smc(uint32_t imm16) { - return (EC_AA64_SMC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); + uint32_t res = syn_set_ec(0, EC_AA64_SMC); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); + return res; } static inline uint32_t syn_aa32_svc(uint32_t imm16, bool is_16bit) { - return (EC_AA32_SVC << ARM_EL_EC_SHIFT) | (imm16 & 0xffff) - | (is_16bit ? 0 : ARM_EL_IL); + uint32_t res = syn_set_ec(0, EC_AA32_SVC); + res = FIELD_DP32(res, SYNDROME, IL, is_16bit ? 0 : 1); + res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); + return res; } static inline uint32_t syn_aa32_hvc(uint32_t imm16) { - return (EC_AA32_HVC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); + uint32_t res = syn_set_ec(0, EC_AA32_HVC); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); + return res; } static inline uint32_t syn_aa32_smc(void) { - return (EC_AA32_SMC << ARM_EL_EC_SHIFT) | ARM_EL_IL; + uint32_t res = syn_set_ec(0, EC_AA32_SMC); + res = FIELD_DP32(res, SYNDROME, IL, 1); + return res; } static inline uint32_t syn_aa64_bkpt(uint32_t imm16) { - return (EC_AA64_BKPT << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); + uint32_t res = syn_set_ec(0, EC_AA64_BKPT); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); + return res; } static inline uint32_t syn_aa32_bkpt(uint32_t imm16, bool is_16bit) { - return (EC_AA32_BKPT << ARM_EL_EC_SHIFT) | (imm16 & 0xffff) - | (is_16bit ? 0 : ARM_EL_IL); + uint32_t res = syn_set_ec(0, EC_AA32_BKPT); + res = FIELD_DP32(res, SYNDROME, IL, is_16bit ? 0 : 1); + res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); + return res; } static inline uint32_t syn_aa64_sysregtrap(int op0, int op1, int op2, @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_simd_access_trap(int cv, int cond, bool is_16bit) static inline uint32_t syn_sve_access_trap(void) { - return (EC_SVEACCESSTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL; + uint32_t res = syn_set_ec(0, EC_SVEACCESSTRAP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + return res; } /* @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit) static inline uint32_t syn_illegalstate(void) { - return (EC_ILLEGALSTATE << ARM_EL_EC_SHIFT) | ARM_EL_IL; + uint32_t res = syn_set_ec(0, EC_ILLEGALSTATE); + res = FIELD_DP32(res, SYNDROME, IL, 1); + return res; } static inline uint32_t syn_pcalignment(void) { - return (EC_PCALIGNMENT << ARM_EL_EC_SHIFT) | ARM_EL_IL; + uint32_t res = syn_set_ec(0, EC_PCALIGNMENT); + res = FIELD_DP32(res, SYNDROME, IL, 1); + return res; } static inline uint32_t syn_gcs_data_check(GCSInstructionType it, int rn) @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_gcs_gcsstr(int ra, int rn) static inline uint32_t syn_serror(uint32_t extra) { - return (EC_SERROR << ARM_EL_EC_SHIFT) | ARM_EL_IL | extra; + uint32_t res = syn_set_ec(0, EC_SERROR); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, SYNDROME, ISS, extra); + return res; } static inline uint32_t syn_mop(bool is_set, bool is_setg, int options, -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Migrate syn_aa64_sysregtrap and co-processor register trap syndromes to the registerfields API. The co-processor syndromes are split between single and duel register moves. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-3-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 124 ++++++++++++++++++++++++++++++++++-------- 1 file changed, 102 insertions(+), 22 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ enum arm_exception_class { /* Generic syndrome encoding layout for HSR and lower 32 bits of ESR_EL2 */ FIELD(SYNDROME, EC, 26, 6) -FIELD(SYNDROME, IL, 25, 1) +FIELD(SYNDROME, IL, 25, 1) /* IL=1 for 32 bit instructions */ FIELD(SYNDROME, ISS, 0, 25) typedef enum { @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_aa64_smc(uint32_t imm16) static inline uint32_t syn_aa32_svc(uint32_t imm16, bool is_16bit) { uint32_t res = syn_set_ec(0, EC_AA32_SVC); - res = FIELD_DP32(res, SYNDROME, IL, is_16bit ? 0 : 1); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); return res; } @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_aa64_bkpt(uint32_t imm16) static inline uint32_t syn_aa32_bkpt(uint32_t imm16, bool is_16bit) { uint32_t res = syn_set_ec(0, EC_AA32_BKPT); - res = FIELD_DP32(res, SYNDROME, IL, is_16bit ? 0 : 1); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); return res; } +/* + * ISS encoding for an exception from MSR, MRS, or System instruction + * in AArch64 state. + */ +FIELD(SYSREG_ISS, ISREAD, 0, 1) /* Direction, 1 is read */ +FIELD(SYSREG_ISS, CRM, 1, 4) +FIELD(SYSREG_ISS, RT, 5, 5) +FIELD(SYSREG_ISS, CRN, 10, 4) +FIELD(SYSREG_ISS, OP1, 14, 3) +FIELD(SYSREG_ISS, OP2, 17, 3) +FIELD(SYSREG_ISS, OP0, 20, 2) + static inline uint32_t syn_aa64_sysregtrap(int op0, int op1, int op2, int crn, int crm, int rt, int isread) { - return (EC_SYSTEMREGISTERTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL - | (op0 << 20) | (op2 << 17) | (op1 << 14) | (crn << 10) | (rt << 5) - | (crm << 1) | isread; + uint32_t res = syn_set_ec(0, EC_SYSTEMREGISTERTRAP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, SYSREG_ISS, OP0, op0); + res = FIELD_DP32(res, SYSREG_ISS, OP2, op2); + res = FIELD_DP32(res, SYSREG_ISS, OP1, op1); + res = FIELD_DP32(res, SYSREG_ISS, CRN, crn); + res = FIELD_DP32(res, SYSREG_ISS, RT, rt); + res = FIELD_DP32(res, SYSREG_ISS, CRM, crm); + res = FIELD_DP32(res, SYSREG_ISS, ISREAD, isread); + + return res; } +/* + * ISS encoding for an exception from an MCR or MRC access + * (move to/from co-processor) + */ +FIELD(COPROC_ISS, ISREAD, 0, 1) +FIELD(COPROC_ISS, CRM, 1, 4) +FIELD(COPROC_ISS, RT, 5, 5) +FIELD(COPROC_ISS, CRN, 10, 4) +FIELD(COPROC_ISS, OP1, 14, 3) +FIELD(COPROC_ISS, OP2, 17, 3) +FIELD(COPROC_ISS, COND, 20, 4) +FIELD(COPROC_ISS, CV, 24, 1) + static inline uint32_t syn_cp14_rt_trap(int cv, int cond, int opc1, int opc2, int crn, int crm, int rt, int isread, bool is_16bit) { - return (EC_CP14RTTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | (opc2 << 17) | (opc1 << 14) - | (crn << 10) | (rt << 5) | (crm << 1) | isread; + uint32_t res = syn_set_ec(0, EC_CP14RTTRAP); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); + + res = FIELD_DP32(res, COPROC_ISS, CV, cv); + res = FIELD_DP32(res, COPROC_ISS, COND, cond); + res = FIELD_DP32(res, COPROC_ISS, OP2, opc2); + res = FIELD_DP32(res, COPROC_ISS, OP1, opc1); + res = FIELD_DP32(res, COPROC_ISS, CRN, crn); + res = FIELD_DP32(res, COPROC_ISS, RT, rt); + res = FIELD_DP32(res, COPROC_ISS, CRM, crm); + res = FIELD_DP32(res, COPROC_ISS, ISREAD, isread); + + return res; } static inline uint32_t syn_cp15_rt_trap(int cv, int cond, int opc1, int opc2, int crn, int crm, int rt, int isread, bool is_16bit) { - return (EC_CP15RTTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | (opc2 << 17) | (opc1 << 14) - | (crn << 10) | (rt << 5) | (crm << 1) | isread; + uint32_t res = syn_set_ec(0, EC_CP15RTTRAP); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); + + res = FIELD_DP32(res, COPROC_ISS, CV, cv); + res = FIELD_DP32(res, COPROC_ISS, COND, cond); + res = FIELD_DP32(res, COPROC_ISS, OP2, opc2); + res = FIELD_DP32(res, COPROC_ISS, OP1, opc1); + res = FIELD_DP32(res, COPROC_ISS, CRN, crn); + res = FIELD_DP32(res, COPROC_ISS, RT, rt); + res = FIELD_DP32(res, COPROC_ISS, CRM, crm); + res = FIELD_DP32(res, COPROC_ISS, ISREAD, isread); + + return res; } +/* + * ISS encoding for an exception from an MCRR or MRRC access + * (move to/from co-processor with 2 regs) + */ +FIELD(COPROC_R2_ISS, ISREAD, 0, 1) +FIELD(COPROC_R2_ISS, CRM, 1, 4) +FIELD(COPROC_R2_ISS, RT, 5, 5) +FIELD(COPROC_R2_ISS, RT2, 10, 5) +FIELD(COPROC_R2_ISS, OP1, 16, 4) +FIELD(COPROC_R2_ISS, COND, 20, 4) +FIELD(COPROC_R2_ISS, CV, 24, 1) + static inline uint32_t syn_cp14_rrt_trap(int cv, int cond, int opc1, int crm, int rt, int rt2, int isread, bool is_16bit) { - return (EC_CP14RRTTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | (opc1 << 16) - | (rt2 << 10) | (rt << 5) | (crm << 1) | isread; + uint32_t res = syn_set_ec(0, EC_CP14RRTTRAP); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); + + res = FIELD_DP32(res, COPROC_R2_ISS, CV, cv); + res = FIELD_DP32(res, COPROC_R2_ISS, COND, cond); + res = FIELD_DP32(res, COPROC_R2_ISS, OP1, opc1); + res = FIELD_DP32(res, COPROC_R2_ISS, RT2, rt2); + res = FIELD_DP32(res, COPROC_R2_ISS, RT, rt); + res = FIELD_DP32(res, COPROC_R2_ISS, CRM, crm); + res = FIELD_DP32(res, COPROC_R2_ISS, ISREAD, isread); + + return res; } static inline uint32_t syn_cp15_rrt_trap(int cv, int cond, int opc1, int crm, int rt, int rt2, int isread, bool is_16bit) { - return (EC_CP15RRTTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | (opc1 << 16) - | (rt2 << 10) | (rt << 5) | (crm << 1) | isread; + uint32_t res = syn_set_ec(0, EC_CP15RRTTRAP); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); + + res = FIELD_DP32(res, COPROC_R2_ISS, CV, cv); + res = FIELD_DP32(res, COPROC_R2_ISS, COND, cond); + res = FIELD_DP32(res, COPROC_R2_ISS, OP1, opc1); + res = FIELD_DP32(res, COPROC_R2_ISS, RT2, rt2); + res = FIELD_DP32(res, COPROC_R2_ISS, RT, rt); + res = FIELD_DP32(res, COPROC_R2_ISS, CRM, crm); + res = FIELD_DP32(res, COPROC_R2_ISS, ISREAD, isread); + + return res; } static inline uint32_t syn_fp_access_trap(int cv, int cond, bool is_16bit, -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> The syn_simd_access trap was never used so remove it. We should only see the COPROC encoding on v7 architectures. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-4-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 25 +++++++++++++++---------- 1 file changed, 15 insertions(+), 10 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_cp15_rrt_trap(int cv, int cond, int opc1, int crm, return res; } +/* + * ISS encoding for an exception from an access to a register of + * instruction resulting from the FPEN or TFP traps. + */ +FIELD(FP_ISS, COPROC, 0, 4) /* ARMv7 only */ +FIELD(FP_ISS, COND, 20, 4) +FIELD(FP_ISS, CV, 24, 1) + static inline uint32_t syn_fp_access_trap(int cv, int cond, bool is_16bit, int coproc) { /* AArch32 FP trap or any AArch64 FP/SIMD trap: TA == 0 */ - return (EC_ADVSIMDFPACCESSTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | coproc; -} + uint32_t res = syn_set_ec(0, EC_ADVSIMDFPACCESSTRAP); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); -static inline uint32_t syn_simd_access_trap(int cv, int cond, bool is_16bit) -{ - /* AArch32 SIMD trap: TA == 1 coproc == 0 */ - return (EC_ADVSIMDFPACCESSTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | (1 << 5); + res = FIELD_DP32(res, FP_ISS, CV, cv); + res = FIELD_DP32(res, FP_ISS, COND, cond); + res = FIELD_DP32(res, FP_ISS, COPROC, coproc); + + return res; } static inline uint32_t syn_sve_access_trap(void) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> For simplicity keep the OP as a two bit field rather than the two interlinked fields in the docs (ERET/ERETA). Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-5-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_sve_access_trap(void) } /* + * ISS encoding for an exception from an ERET, ERETAA or ERETAB + * instructions. + * * eret_op is bits [1:0] of the ERET instruction, so: * 0 for ERET, 2 for ERETAA, 3 for ERETAB. */ +FIELD(ERET_ISS, OP, 0, 2) + static inline uint32_t syn_erettrap(int eret_op) { - return (EC_ERETTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL | eret_op; + uint32_t res = syn_set_ec(0, EC_ERETTRAP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, ERET_ISS, OP, eret_op); + + return res; } static inline uint32_t syn_smetrap(SMEExceptionType etype, bool is_16bit) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-6-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_erettrap(int eret_op) return res; } +/* + * ISS encoding for an exception due to SME functionality + */ +FIELD(SME_ISS, SMTC, 0, 2) + static inline uint32_t syn_smetrap(SMEExceptionType etype, bool is_16bit) { - return (EC_SMETRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) | etype; + uint32_t res = syn_set_ec(0, EC_SMETRAP); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); + res = FIELD_DP32(res, SME_ISS, SMTC, etype); + + return res; } static inline uint32_t syn_pacfail(bool data, int keynumber) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> syn_pactrap is fairly simple as the ISS is all RES0. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-7-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 23 ++++++++++++++++++++--- 1 file changed, 20 insertions(+), 3 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_smetrap(SMEExceptionType etype, bool is_16bit) return res; } +/* + * ISS encoding for a PAC Fail exceptions + */ +FIELD(PACFAIL_ISS, BnA, 0, 1) /* B key or A key */ +FIELD(PACFAIL_ISS, DnI, 1, 1) /* Data or Instruction */ + static inline uint32_t syn_pacfail(bool data, int keynumber) { - int error_code = (data << 1) | keynumber; - return (EC_PACFAIL << ARM_EL_EC_SHIFT) | ARM_EL_IL | error_code; + uint32_t res = syn_set_ec(0, EC_PACFAIL); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, PACFAIL_ISS, DnI, data); + res = FIELD_DP32(res, PACFAIL_ISS, BnA, keynumber); + + return res; } +/* + * ISS encoding for an exception from a trapped Pointer + * Authentication instruction is RES0 + */ static inline uint32_t syn_pactrap(void) { - return (EC_PACTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL; + uint32_t res = syn_set_ec(0, EC_PACTRAP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + return res; } static inline uint32_t syn_btitrap(int btype) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-8-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_pactrap(void) return res; } +/* + * ISS encoding for an exception from a Branch Target Identification + * instruction. + */ +FIELD(BTI_ISS, BTYPE, 0, 2) + static inline uint32_t syn_btitrap(int btype) { - return (EC_BTITRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL | btype; + uint32_t res = syn_set_ec(0, EC_BTITRAP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, BTI_ISS, BTYPE, btype); + return res; } static inline uint32_t syn_bxjtrap(int cv, int cond, int rm) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> This is an Armv7 specific syndrome for chips with Jazelle functionality. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-9-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_btitrap(int btype) return res; } +/* + * ISS encoding for trapped BXJ execution + * + * This is an Armv7 encoding. + */ +FIELD(BXJ_ISS, RM, 0, 4) +/* bits 4:19 are Reserved, UNK/SBZP */ +FIELD(BXJ_ISS, COND, 20, 4) +FIELD(BXJ_ISS, CV, 24, 1) + static inline uint32_t syn_bxjtrap(int cv, int cond, int rm) { - return (EC_BXJTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL | - (cv << 24) | (cond << 20) | rm; + uint32_t res = syn_set_ec(0, EC_BXJTRAP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, BXJ_ISS, CV, cv); + res = FIELD_DP32(res, BXJ_ISS, COND, cond); + res = FIELD_DP32(res, BXJ_ISS, RM, rm); + + return res; } static inline uint32_t syn_gpc(int s2ptw, int ind, int gpcsc, int vncr, -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-10-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 30 +++++++++++++++++++++++++++--- 1 file changed, 27 insertions(+), 3 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_bxjtrap(int cv, int cond, int rm) return res; } +/* + * ISS encoding for a Granule Protection Check exception + * + * These are only reported to EL3 + */ +FIELD(GPC_ISS, xFSC, 0, 6) +FIELD(GPC_ISS, WnR, 6, 1) /* Write not Read */ +FIELD(GPC_ISS, S1PTW, 7, 1) +FIELD(GPC_ISS, CM, 8, 1) +FIELD(GPC_ISS, VNCR, 13, 1) +FIELD(GPC_ISS, GPCSC, 14, 6) +FIELD(GPC_ISS, InD, 20, 1) /* Instruction not Data access */ +FIELD(GPC_ISS, S2PTW, 21, 1) + static inline uint32_t syn_gpc(int s2ptw, int ind, int gpcsc, int vncr, int cm, int s1ptw, int wnr, int fsc) { - return (EC_GPC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (s2ptw << 21) - | (ind << 20) | (gpcsc << 14) | (vncr << 13) | (cm << 8) - | (s1ptw << 7) | (wnr << 6) | fsc; + uint32_t res = syn_set_ec(0, EC_GPC); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, GPC_ISS, S2PTW, s2ptw); + res = FIELD_DP32(res, GPC_ISS, InD, ind); + res = FIELD_DP32(res, GPC_ISS, GPCSC, gpcsc); + res = FIELD_DP32(res, GPC_ISS, VNCR, vncr); + res = FIELD_DP32(res, GPC_ISS, CM, cm); + res = FIELD_DP32(res, GPC_ISS, S1PTW, s1ptw); + res = FIELD_DP32(res, GPC_ISS, WnR, wnr); + res = FIELD_DP32(res, GPC_ISS, xFSC, fsc); + + return res; } static inline uint32_t syn_insn_abort(int same_el, int ea, int s1ptw, int fsc) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Migrate syn_insn_abort and syn_data_abort_* to the registerfields API. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20260422125250.1303100-11-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 87 ++++++++++++++++++++++++++++++++++++------- 1 file changed, 74 insertions(+), 13 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_gpc(int s2ptw, int ind, int gpcsc, int vncr, return res; } +/* + * ISS encoding for an exception from an Instruction Abort + * + * (aka instruction abort) + */ +FIELD(IABORT_ISS, IFSC, 0, 6) +FIELD(IABORT_ISS, S1PTW, 7, 1) +FIELD(IABORT_ISS, EA, 9, 1) +FIELD(IABORT_ISS, FnV, 10, 1) /* FAR not Valid */ +FIELD(IABORT_ISS, SET, 11, 2) +FIELD(IABORT_ISS, PFV, 14, 1) +FIELD(IABORT_ISS, TopLevel, 21, 1) /* FEAT_THE */ + static inline uint32_t syn_insn_abort(int same_el, int ea, int s1ptw, int fsc) { - return (EC_INSNABORT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | ARM_EL_IL | (ea << 9) | (s1ptw << 7) | fsc; + uint32_t res = syn_set_ec(0, EC_INSNABORT + same_el); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, IABORT_ISS, EA, ea); + res = FIELD_DP32(res, IABORT_ISS, S1PTW, s1ptw); + res = FIELD_DP32(res, IABORT_ISS, IFSC, fsc); + + return res; } +/* + * ISS encoding for an exception from a Data Abort + */ +FIELD(DABORT_ISS, DFSC, 0, 6) +FIELD(DABORT_ISS, WNR, 6, 1) +FIELD(DABORT_ISS, S1PTW, 7, 1) +FIELD(DABORT_ISS, CM, 8, 1) +FIELD(DABORT_ISS, EA, 9, 1) +FIELD(DABORT_ISS, FnV, 10, 1) +FIELD(DABORT_ISS, LST, 11, 2) +FIELD(DABORT_ISS, VNCR, 13, 1) +FIELD(DABORT_ISS, AR, 14, 1) +FIELD(DABORT_ISS, SF, 15, 1) +FIELD(DABORT_ISS, SRT, 16, 5) +FIELD(DABORT_ISS, SSE, 21, 1) +FIELD(DABORT_ISS, SAS, 22, 2) +FIELD(DABORT_ISS, ISV, 24, 1) + static inline uint32_t syn_data_abort_no_iss(int same_el, int fnv, int ea, int cm, int s1ptw, int wnr, int fsc) { - return (EC_DATAABORT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | ARM_EL_IL - | (fnv << 10) | (ea << 9) | (cm << 8) | (s1ptw << 7) - | (wnr << 6) | fsc; + uint32_t res = syn_set_ec(0, EC_DATAABORT + same_el); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, DABORT_ISS, FnV, fnv); + res = FIELD_DP32(res, DABORT_ISS, EA, ea); + res = FIELD_DP32(res, DABORT_ISS, CM, cm); + res = FIELD_DP32(res, DABORT_ISS, S1PTW, s1ptw); + res = FIELD_DP32(res, DABORT_ISS, WNR, wnr); + res = FIELD_DP32(res, DABORT_ISS, DFSC, fsc); + + return res; } static inline uint32_t syn_data_abort_with_iss(int same_el, @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_data_abort_with_iss(int same_el, int wnr, int fsc, bool is_16bit) { - return (EC_DATAABORT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | ARM_EL_ISV | (sas << 22) | (sse << 21) | (srt << 16) - | (sf << 15) | (ar << 14) - | (ea << 9) | (cm << 8) | (s1ptw << 7) | (wnr << 6) | fsc; + uint32_t res = syn_set_ec(0, EC_DATAABORT + same_el); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); + + res = FIELD_DP32(res, DABORT_ISS, ISV, 1); + res = FIELD_DP32(res, DABORT_ISS, SAS, sas); + res = FIELD_DP32(res, DABORT_ISS, SSE, sse); + res = FIELD_DP32(res, DABORT_ISS, SRT, srt); + res = FIELD_DP32(res, DABORT_ISS, SF, sf); + res = FIELD_DP32(res, DABORT_ISS, AR, ar); + res = FIELD_DP32(res, DABORT_ISS, EA, ea); + res = FIELD_DP32(res, DABORT_ISS, CM, cm); + res = FIELD_DP32(res, DABORT_ISS, S1PTW, s1ptw); + res = FIELD_DP32(res, DABORT_ISS, WNR, wnr); + res = FIELD_DP32(res, DABORT_ISS, DFSC, fsc); + + return res; } /* @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_data_abort_with_iss(int same_el, */ static inline uint32_t syn_data_abort_vncr(int ea, int wnr, int fsc) { - return (EC_DATAABORT << ARM_EL_EC_SHIFT) | (1 << ARM_EL_EC_SHIFT) - | ARM_EL_IL | ARM_EL_VNCR | (wnr << 6) | fsc; + uint32_t res = syn_set_ec(0, EC_DATAABORT_SAME_EL); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, DABORT_ISS, VNCR, 1); + res = FIELD_DP32(res, DABORT_ISS, WNR, wnr); + res = FIELD_DP32(res, DABORT_ISS, DFSC, fsc); + + return res; } static inline uint32_t syn_swstep(int same_el, int isv, int ex) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Migrate syn_swstep, syn_watchpoint and syn_breakpoint to the registerfields API. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-12-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 54 ++++++++++++++++++++++++++++++++++++++----- 1 file changed, 48 insertions(+), 6 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_data_abort_vncr(int ea, int wnr, int fsc) return res; } +/* + * ISS encoding for an exception from a Software Step exception. + */ +FIELD(SOFTSTEP_ISS, IFSC, 0, 6) +FIELD(SOFTSTEP_ISS, EX, 6, 1) +FIELD(SOFTSTEP_ISS, ISV, 24, 1) + static inline uint32_t syn_swstep(int same_el, int isv, int ex) { - return (EC_SOFTWARESTEP << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | ARM_EL_IL | (isv << 24) | (ex << 6) | 0x22; + uint32_t res = syn_set_ec(0, EC_SOFTWARESTEP + same_el); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, SOFTSTEP_ISS, ISV, isv); + res = FIELD_DP32(res, SOFTSTEP_ISS, EX, ex); + res = FIELD_DP32(res, SOFTSTEP_ISS, IFSC, 0x22); + + return res; } +/* + * ISS encoding for an exception from a Watchpoint exception + */ +FIELD(WATCHPOINT_ISS, DFSC, 0, 6) +FIELD(WATCHPOINT_ISS, WNR, 6, 1) +FIELD(WATCHPOINT_ISS, CM, 8, 1) +FIELD(WATCHPOINT_ISS, FnV, 10, 1) +FIELD(WATCHPOINT_ISS, VNCR, 13, 1) /* FEAT_NV2 */ +FIELD(WATCHPOINT_ISS, FnP, 15, 1) +FIELD(WATCHPOINT_ISS, WPF, 16, 1) +/* bellow mandatory from FEAT_Debugv8p9 */ +FIELD(WATCHPOINT_ISS, WPTV, 17, 1) /* FEAT_Debugv8p2 - WPT valid */ +FIELD(WATCHPOINT_ISS, WPT, 18, 6) /* FEAT_Debugv8p2 - missing WP number */ + static inline uint32_t syn_watchpoint(int same_el, int cm, int wnr) { - return (EC_WATCHPOINT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | ARM_EL_IL | (cm << 8) | (wnr << 6) | 0x22; + uint32_t res = syn_set_ec(0, EC_WATCHPOINT + same_el); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, WATCHPOINT_ISS, CM, cm); + res = FIELD_DP32(res, WATCHPOINT_ISS, WNR, wnr); + res = FIELD_DP32(res, WATCHPOINT_ISS, DFSC, 0x22); + + return res; } +/* + * ISS encoding for an exception from a Breakpoint or a Vector Catch + * debug exception. + */ +FIELD(BREAKPOINT_ISS, IFSC, 0, 6) + static inline uint32_t syn_breakpoint(int same_el) { - return (EC_BREAKPOINT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | ARM_EL_IL | 0x22; + uint32_t res = syn_set_ec(0, EC_BREAKPOINT + same_el); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, BREAKPOINT_ISS, IFSC, 0x22); + + return res; } static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> This will help later when we expand the fields we report. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-13-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_breakpoint(int same_el) return res; } +/* + * ISS encoding for an exception from a WF* instruction + */ +FIELD(WFX_ISS, TI, 0, 2) +FIELD(WFX_ISS, RV, 2, 1) +FIELD(WFX_ISS, RN, 5, 5) +FIELD(WFX_ISS, COND, 20, 4) +FIELD(WFX_ISS, CV, 24, 1) + static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit) { - return (EC_WFX_TRAP << ARM_EL_EC_SHIFT) | - (is_16bit ? 0 : (1 << ARM_EL_IL_SHIFT)) | - (cv << 24) | (cond << 20) | ti; + uint32_t res = syn_set_ec(0, EC_WFX_TRAP); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); + + res = FIELD_DP32(res, WFX_ISS, CV, cv); + res = FIELD_DP32(res, WFX_ISS, COND, cond); + res = FIELD_DP32(res, WFX_ISS, TI, ti); + + return res; } static inline uint32_t syn_illegalstate(void) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Tweak arg names to make it clear raddr is the data address register number. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-14-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 39 +++++++++++++++++++++++++++++++++------ 1 file changed, 33 insertions(+), 6 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_pcalignment(void) return res; } +/* + * ISS encoding for a GCS exception + * + * Field validity depends on EXTYPE + */ +FIELD(GCS_ISS, IT, 0, 5) +FIELD(GCS_ISS, RN, 5, 5) /* only for non EXLOCK exceptions */ +FIELD(GCS_ISS, RADDR, 10, 5) /* only for GCSSTR/GCSSTTR traps */ +FIELD(GCS_ISS, EXTYPE, 20, 4) + static inline uint32_t syn_gcs_data_check(GCSInstructionType it, int rn) { - return ((EC_GCS << ARM_EL_EC_SHIFT) | ARM_EL_IL | - (GCS_ET_DataCheck << 20) | (rn << 5) | it); + uint32_t res = syn_set_ec(0, EC_GCS); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, GCS_ISS, EXTYPE, GCS_ET_DataCheck); + res = FIELD_DP32(res, GCS_ISS, RN, rn); + res = FIELD_DP32(res, GCS_ISS, IT, it); + + return res; } static inline uint32_t syn_gcs_exlock(void) { - return (EC_GCS << ARM_EL_EC_SHIFT) | ARM_EL_IL | (GCS_ET_EXLOCK << 20); + uint32_t res = syn_set_ec(0, EC_GCS); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, GCS_ISS, EXTYPE, GCS_ET_EXLOCK); + + return res; } -static inline uint32_t syn_gcs_gcsstr(int ra, int rn) +static inline uint32_t syn_gcs_gcsstr(int raddr, int rn) { - return ((EC_GCS << ARM_EL_EC_SHIFT) | ARM_EL_IL | - (GCS_ET_GCSSTR_GCSSTTR << 20) | (ra << 10) | (rn << 5)); + uint32_t res = syn_set_ec(0, EC_GCS); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, GCS_ISS, EXTYPE, GCS_ET_GCSSTR_GCSSTTR); + res = FIELD_DP32(res, GCS_ISS, RADDR, raddr); + res = FIELD_DP32(res, GCS_ISS, RN, rn); + + return res; } static inline uint32_t syn_serror(uint32_t extra) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-15-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 33 +++++++++++++++++++++++++++++---- 1 file changed, 29 insertions(+), 4 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_serror(uint32_t extra) return res; } +/* + * ISS encoding for an exception from the Memory Copy and Memory Set + * instructions. + */ +FIELD(MOP_ISS, SIZEREG, 0, 5) +FIELD(MOP_ISS, SRCREG, 5, 5) +FIELD(MOP_ISS, DESTREG, 10, 5) +FIELD(MOP_ISS, FORMATOPT, 16, 2) +FIELD(MOP_ISS, OPT_A, 16, 1) +FIELD(MOP_ISS, WRONG_OPT, 17, 1) +FIELD(MOP_ISS, EPILOGUE, 18, 1) +FIELD(MOP_ISS, OPTIONS, 19, 4) +FIELD(MOP_ISS, IS_SETG, 23, 1) +FIELD(MOP_ISS, MEMINST, 24, 1) + static inline uint32_t syn_mop(bool is_set, bool is_setg, int options, bool epilogue, bool wrong_option, bool option_a, int destreg, int srcreg, int sizereg) { - return (EC_MOP << ARM_EL_EC_SHIFT) | ARM_EL_IL | - (is_set << 24) | (is_setg << 23) | (options << 19) | - (epilogue << 18) | (wrong_option << 17) | (option_a << 16) | - (destreg << 10) | (srcreg << 5) | sizereg; + uint32_t res = syn_set_ec(0, EC_MOP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, MOP_ISS, MEMINST, is_set); + res = FIELD_DP32(res, MOP_ISS, IS_SETG, is_setg); + res = FIELD_DP32(res, MOP_ISS, OPTIONS, options); + res = FIELD_DP32(res, MOP_ISS, EPILOGUE, epilogue); + res = FIELD_DP32(res, MOP_ISS, WRONG_OPT, wrong_option); + res = FIELD_DP32(res, MOP_ISS, OPT_A, option_a); + res = FIELD_DP32(res, MOP_ISS, DESTREG, destreg); + res = FIELD_DP32(res, MOP_ISS, SRCREG, srcreg); + res = FIELD_DP32(res, MOP_ISS, SIZEREG, sizereg); + + return res; } -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> It shares the same COPROC_ISS encoding as the other CP traps although not all the fields are used. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-16-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 16 ++++++++++++++++ target/arm/tcg/vfp_helper.c | 5 +---- 2 files changed, 17 insertions(+), 4 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ FIELD(COPROC_ISS, OP2, 17, 3) FIELD(COPROC_ISS, COND, 20, 4) FIELD(COPROC_ISS, CV, 24, 1) +static inline uint32_t syn_cp10_rt_trap(int cv, int cond, int opc1, + int crn, int rt, int isread) +{ + uint32_t res = syn_set_ec(0, EC_FPIDTRAP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, COPROC_ISS, CV, cv); + res = FIELD_DP32(res, COPROC_ISS, COND, cond); + res = FIELD_DP32(res, COPROC_ISS, OP1, opc1); + res = FIELD_DP32(res, COPROC_ISS, CRN, crn); + res = FIELD_DP32(res, COPROC_ISS, RT, rt); + res = FIELD_DP32(res, COPROC_ISS, ISREAD, isread); + + return res; +} + static inline uint32_t syn_cp14_rt_trap(int cv, int cond, int opc1, int opc2, int crn, int crm, int rt, int isread, bool is_16bit) diff --git a/target/arm/tcg/vfp_helper.c b/target/arm/tcg/vfp_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/vfp_helper.c +++ b/target/arm/tcg/vfp_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(check_hcr_el2_trap)(CPUARMState *env, uint32_t rt, uint32_t reg) g_assert_not_reached(); } - syndrome = ((EC_FPIDTRAP << ARM_EL_EC_SHIFT) - | ARM_EL_IL - | (1 << 24) | (0xe << 20) | (7 << 14) - | (reg << 10) | (rt << 5) | 1); + syndrome = syn_cp10_rt_trap(1, 0xe, 7, reg, rt, 1); raise_exception(env, EXCP_HYP_TRAP, syndrome, 2); } -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> One more step towards dropping the old #defines. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-17-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch32_hyp(CPUState *cs) */ if (cs->exception_index == EXCP_PREFETCH_ABORT || (cs->exception_index == EXCP_DATA_ABORT && - !(env->exception.syndrome & ARM_EL_ISV)) || + !FIELD_EX32(env->exception.syndrome, SYNDROME, IL)) || syn_get_ec(env->exception.syndrome) == EC_UNCATEGORIZED) { - env->exception.syndrome &= ~ARM_EL_IL; + env->exception.syndrome = FIELD_DP32(env->exception.syndrome, SYNDROME, IL, 0); } } env->cp15.esr_el[2] = env->exception.syndrome; -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> This removes the last use of ARM_EL_EC_SHIFT. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-18-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 1 - target/arm/tcg/debug.c | 2 +- 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ typedef enum { } GCSInstructionType; #define ARM_EL_EC_LENGTH 6 -#define ARM_EL_EC_SHIFT 26 #define ARM_EL_IL_SHIFT 25 #define ARM_EL_ISV_SHIFT 24 #define ARM_EL_IL (1 << ARM_EL_IL_SHIFT) diff --git a/target/arm/tcg/debug.c b/target/arm/tcg/debug.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/debug.c +++ b/target/arm/tcg/debug.c @@ -XXX,XX +XXX,XX @@ raise_exception_debug(CPUARMState *env, uint32_t excp, uint32_t syndrome) * Similarly for watchpoint and breakpoint matches. */ assert(debug_el >= cur_el); - syndrome |= (debug_el == cur_el) << ARM_EL_EC_SHIFT; + syndrome |= (debug_el == cur_el) << R_SYNDROME_EC_SHIFT; raise_exception(env, excp, syndrome, debug_el); } -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Rather than open coding a bunch of shifts and masks we can use the syndrome definitions. While we are at it assert it really is a EC_DATAABORT. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-19-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/whpx/whpx-all.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/target/arm/whpx/whpx-all.c b/target/arm/whpx/whpx-all.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/whpx/whpx-all.c +++ b/target/arm/whpx/whpx-all.c @@ -XXX,XX +XXX,XX @@ static int whpx_handle_mmio(CPUState *cpu, WHV_MEMORY_ACCESS_CONTEXT *ctx) { uint64_t syndrome = ctx->Syndrome; - bool isv = syndrome & ARM_EL_ISV; - bool iswrite = (syndrome >> 6) & 1; - bool sse = (syndrome >> 21) & 1; - uint32_t sas = (syndrome >> 22) & 3; + bool isv = FIELD_EX32(syndrome, DABORT_ISS, ISV); + bool iswrite = FIELD_EX32(syndrome, DABORT_ISS, WNR); + bool sse = FIELD_EX32(syndrome, DABORT_ISS, SSE); + uint32_t sas = FIELD_EX32(syndrome, DABORT_ISS, SAS); uint32_t len = 1 << sas; - uint32_t srt = (syndrome >> 16) & 0x1f; - uint32_t cm = (syndrome >> 8) & 0x1; + uint32_t srt = FIELD_EX32(syndrome, DABORT_ISS, SRT); + uint32_t cm = FIELD_EX32(syndrome, DABORT_ISS, CM); uint64_t val = 0; + assert(syn_get_ec(syndrome) == EC_DATAABORT); assert(!cm); assert(isv); -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Rather than open coding a bunch of shifts and masks we can use the syndrome definitions. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20260422125250.1303100-20-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/hvf/hvf.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/target/arm/hvf/hvf.c b/target/arm/hvf/hvf.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/hvf/hvf.c +++ b/target/arm/hvf/hvf.c @@ -XXX,XX +XXX,XX @@ static int hvf_handle_exception(CPUState *cpu, hv_vcpu_exit_exception_t *excp) break; } case EC_DATAABORT: { - bool isv = syndrome & ARM_EL_ISV; - bool iswrite = (syndrome >> 6) & 1; - bool s1ptw = (syndrome >> 7) & 1; - bool sse = (syndrome >> 21) & 1; - uint32_t sas = (syndrome >> 22) & 3; + bool isv = FIELD_EX32(syndrome, DABORT_ISS, ISV); + bool iswrite = FIELD_EX32(syndrome, DABORT_ISS, WNR); + bool s1ptw = FIELD_EX32(syndrome, DABORT_ISS, S1PTW); + bool sse = FIELD_EX32(syndrome, DABORT_ISS, SSE); + uint32_t sas = FIELD_EX32(syndrome, DABORT_ISS, SAS); uint32_t len = 1 << sas; - uint32_t srt = (syndrome >> 16) & 0x1f; - uint32_t cm = (syndrome >> 8) & 0x1; + uint32_t srt = FIELD_EX32(syndrome, DABORT_ISS, SRT); + uint32_t cm = FIELD_EX32(syndrome, DABORT_ISS, CM); uint64_t val = 0; uint64_t ipa = excp->physical_address; AddressSpace *as = cpu_get_address_space(cpu, ARMASIdx_NS); -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> One more step to removing the old defines. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-21-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/tlb_helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/tcg/tlb_helper.c b/target/arm/tcg/tlb_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/tlb_helper.c +++ b/target/arm/tcg/tlb_helper.c @@ -XXX,XX +XXX,XX @@ static inline uint64_t merge_syn_data_abort(uint32_t template_syn, */ assert(!fi->stage2); syn = syn_data_abort_vncr(fi->ea, is_write, fsc); - } else if (!(template_syn & ARM_EL_ISV) || target_el != 2 + } else if (!FIELD_EX32(template_syn, DABORT_ISS, ISV) || target_el != 2 || fi->s1ptw || !fi->stage2) { syn = syn_data_abort_no_iss(same_el, 0, fi->ea, 0, fi->s1ptw, is_write, fsc); -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> These are only valid for data abort syndromes. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-22-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/tlb_helper.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/tcg/tlb_helper.c b/target/arm/tcg/tlb_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/tlb_helper.c +++ b/target/arm/tcg/tlb_helper.c @@ -XXX,XX +XXX,XX @@ static inline uint64_t merge_syn_data_abort(uint32_t template_syn, * ST64BV, or ST64BV0 insns report syndrome info even for stage-1 * faults and regardless of the target EL. */ - if (template_syn & ARM_EL_VNCR) { + if (FIELD_EX32(template_syn, DABORT_ISS, VNCR)) { /* * FEAT_NV2 faults on accesses via VNCR_EL2 are a special case: * they are always reported as "same EL", even though we are going @@ -XXX,XX +XXX,XX @@ void arm_deliver_fault(ARMCPU *cpu, vaddr addr, * because we masked that out in disas_set_insn_syndrome()) */ bool is_vncr = (access_type != MMU_INST_FETCH) && - (env->exception.syndrome & ARM_EL_VNCR); + FIELD_EX32(env->exception.syndrome, DABORT_ISS, VNCR); if (is_vncr) { /* FEAT_NV2 faults on accesses via VNCR_EL2 go to EL2 */ -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Now everything is defined with registerfields we can drop the old defines. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-23-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 9 --------- 1 file changed, 9 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ typedef enum { GCS_IT_GCSPOPX = 9, } GCSInstructionType; -#define ARM_EL_EC_LENGTH 6 -#define ARM_EL_IL_SHIFT 25 -#define ARM_EL_ISV_SHIFT 24 -#define ARM_EL_IL (1 << ARM_EL_IL_SHIFT) -#define ARM_EL_ISV (1 << ARM_EL_ISV_SHIFT) - -/* In the Data Abort syndrome */ -#define ARM_EL_VNCR (1 << 13) - static inline uint32_t syn_get_ec(uint32_t syn) { return FIELD_EX32(syn, SYNDROME, EC); -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Pass the register number (rd) to the wfit helper and report it in the syndrome ISS. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-24-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 11 ++++++++++- target/arm/tcg/helper-defs.h | 2 +- target/arm/tcg/op_helper.c | 7 ++++--- target/arm/tcg/translate-a64.c | 2 +- 4 files changed, 16 insertions(+), 6 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ FIELD(WFX_ISS, RN, 5, 5) FIELD(WFX_ISS, COND, 20, 4) FIELD(WFX_ISS, CV, 24, 1) -static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit) +typedef enum { + WFI = 0b00, + WFE = 0b01, + WFIT = 0b10, + WFET = 0xb11 +} wfx_ti; + +static inline uint32_t syn_wfx(int cv, int cond, int rn, bool rv, wfx_ti ti, bool is_16bit) { uint32_t res = syn_set_ec(0, EC_WFX_TRAP); res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit) res = FIELD_DP32(res, WFX_ISS, CV, cv); res = FIELD_DP32(res, WFX_ISS, COND, cond); res = FIELD_DP32(res, WFX_ISS, TI, ti); + res = FIELD_DP32(res, WFX_ISS, RN, rn); + res = FIELD_DP32(res, WFX_ISS, RV, rv); return res; } diff --git a/target/arm/tcg/helper-defs.h b/target/arm/tcg/helper-defs.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/helper-defs.h +++ b/target/arm/tcg/helper-defs.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_2(exception_pc_alignment, noreturn, env, vaddr) DEF_HELPER_1(setend, void, env) DEF_HELPER_2(wfi, void, env, i32) DEF_HELPER_1(wfe, void, env) -DEF_HELPER_2(wfit, void, env, i64) +DEF_HELPER_2(wfit, void, env, i32) DEF_HELPER_1(yield, void, env) DEF_HELPER_1(pre_hvc, void, env) DEF_HELPER_2(pre_smc, void, env, i32) diff --git a/target/arm/tcg/op_helper.c b/target/arm/tcg/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/op_helper.c +++ b/target/arm/tcg/op_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(wfi)(CPUARMState *env, uint32_t insn_len) env->regs[15] -= insn_len; } - raise_exception(env, excp, syn_wfx(1, 0xe, 0, insn_len == 2), + raise_exception(env, excp, syn_wfx(1, 0xe, 0, false, WFI, insn_len == 2), target_el); } @@ -XXX,XX +XXX,XX @@ void HELPER(wfi)(CPUARMState *env, uint32_t insn_len) #endif } -void HELPER(wfit)(CPUARMState *env, uint64_t timeout) +void HELPER(wfit)(CPUARMState *env, uint32_t rd) { #ifdef CONFIG_USER_ONLY /* @@ -XXX,XX +XXX,XX @@ void HELPER(wfit)(CPUARMState *env, uint64_t timeout) int target_el = check_wfx_trap(env, false, &excp); /* The WFIT should time out when CNTVCT_EL0 >= the specified value. */ uint64_t cntval = gt_get_countervalue(env); + uint64_t timeout = env->xregs[rd]; /* * We want the value that we would get if we read CNTVCT_EL0 from * the current exception level, so the direct_access offset, not @@ -XXX,XX +XXX,XX @@ void HELPER(wfit)(CPUARMState *env, uint64_t timeout) if (target_el) { env->pc -= 4; - raise_exception(env, excp, syn_wfx(1, 0xe, 2, false), target_el); + raise_exception(env, excp, syn_wfx(1, 0xe, rd, true, WFIT, false), target_el); } if (uadd64_overflow(timeout, offset, &nexttick)) { diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool trans_WFIT(DisasContext *s, arg_WFIT *a) } gen_a64_update_pc(s, 4); - gen_helper_wfit(tcg_env, cpu_reg(s, a->rd)); + gen_helper_wfit(tcg_env, tcg_constant_i32(a->rd)); /* Go back to the main loop to check for interrupts */ s->base.is_jmp = DISAS_EXIT; return true; -- 2.43.0