The following changes since commit 5767815218efd3cbfd409505ed824d5f356044ae: Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging (2024-02-14 15:45:52 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20240215 for you to fetch changes up to f780e63fe731b058fe52d43653600d8729a1b5f2: docs: Add documentation for the mps3-an536 board (2024-02-15 14:32:39 +0000) ---------------------------------------------------------------- target-arm queue: * hw/arm/xilinx_zynq: Wire FIQ between CPU <> GIC * linux-user/aarch64: Choose SYNC as the preferred MTE mode * Fix some errors in SVE/SME handling of MTE tags * hw/pci-host/raven.c: Mark raven_io_ops as implementing unaligned accesses * hw/block/tc58128: Don't emit deprecation warning under qtest * tests/qtest: Fix handling of npcm7xx and GMAC tests * hw/arm/virt: Wire up non-secure EL2 virtual timer IRQ * tests/qtest/npcm7xx_emc-test: Connect all NICs to a backend * Don't assert on vmload/vmsave of M-profile CPUs * hw/arm/smmuv3: add support for stage 1 access fault * hw/arm/stellaris: QOM cleanups * Use new CBAR encoding for all v8 CPUs, not all aarch64 CPUs * Improve Cortex_R52 IMPDEF sysreg modelling * Allow access to SPSR_hyp from hyp mode * New board model mps3-an536 (Cortex-R52) ---------------------------------------------------------------- Luc Michel (1): hw/arm/smmuv3: add support for stage 1 access fault Nabih Estefan (1): tests/qtest: Fix GMAC test to run on a machine in upstream QEMU Peter Maydell (22): hw/pci-host/raven.c: Mark raven_io_ops as implementing unaligned accesses hw/block/tc58128: Don't emit deprecation warning under qtest tests/qtest/meson.build: Don't include qtests_npcm7xx in qtests_aarch64 tests/qtest/bios-tables-test: Allow changes to virt GTDT hw/arm/virt: Wire up non-secure EL2 virtual timer IRQ tests/qtest/bios-tables-tests: Update virt golden reference hw/arm/npcm7xx: Call qemu_configure_nic_device() for GMAC modules tests/qtest/npcm7xx_emc-test: Connect all NICs to a backend target/arm: Don't get MDCR_EL2 in pmu_counter_enabled() before checking ARM_FEATURE_PMU target/arm: Use new CBAR encoding for all v8 CPUs, not all aarch64 CPUs target/arm: The Cortex-R52 has a read-only CBAR target/arm: Add Cortex-R52 IMPDEF sysregs target/arm: Allow access to SPSR_hyp from hyp mode hw/misc/mps2-scc: Fix condition for CFG3 register hw/misc/mps2-scc: Factor out which-board conditionals hw/misc/mps2-scc: Make changes needed for AN536 FPGA image hw/arm/mps3r: Initial skeleton for mps3-an536 board hw/arm/mps3r: Add CPUs, GIC, and per-CPU RAM hw/arm/mps3r: Add UARTs hw/arm/mps3r: Add GPIO, watchdog, dual-timer, I2C devices hw/arm/mps3r: Add remaining devices docs: Add documentation for the mps3-an536 board Philippe Mathieu-Daudé (5): hw/arm/xilinx_zynq: Wire FIQ between CPU <> GIC hw/arm/stellaris: Convert ADC controller to Resettable interface hw/arm/stellaris: Convert I2C controller to Resettable interface hw/arm/stellaris: Add missing QOM 'machine' parent hw/arm/stellaris: Add missing QOM 'SoC' parent Richard Henderson (6): linux-user/aarch64: Choose SYNC as the preferred MTE mode target/arm: Fix nregs computation in do_{ld,st}_zpa target/arm: Adjust and validate mtedesc sizem1 target/arm: Split out make_svemte_desc target/arm: Handle mte in do_ldrq, do_ldro target/arm: Fix SVE/SME gross MTE suppression checks MAINTAINERS | 3 +- docs/system/arm/mps2.rst | 37 +- configs/devices/arm-softmmu/default.mak | 1 + hw/arm/smmuv3-internal.h | 1 + include/hw/arm/smmu-common.h | 1 + include/hw/arm/virt.h | 2 + include/hw/misc/mps2-scc.h | 1 + linux-user/aarch64/target_prctl.h | 29 +- target/arm/internals.h | 2 +- target/arm/tcg/translate-a64.h | 2 + hw/arm/mps3r.c | 640 ++++++++++++++++++++++++++++++++ hw/arm/npcm7xx.c | 1 + hw/arm/smmu-common.c | 11 + hw/arm/smmuv3.c | 1 + hw/arm/stellaris.c | 47 ++- hw/arm/virt-acpi-build.c | 20 +- hw/arm/virt.c | 60 ++- hw/arm/xilinx_zynq.c | 2 + hw/block/tc58128.c | 4 +- hw/misc/mps2-scc.c | 138 ++++++- hw/pci-host/raven.c | 1 + target/arm/helper.c | 14 +- target/arm/tcg/cpu32.c | 109 ++++++ target/arm/tcg/op_helper.c | 43 ++- target/arm/tcg/sme_helper.c | 8 +- target/arm/tcg/sve_helper.c | 12 +- target/arm/tcg/translate-sme.c | 15 +- target/arm/tcg/translate-sve.c | 83 +++-- target/arm/tcg/translate.c | 19 +- tests/qtest/npcm7xx_emc-test.c | 5 +- tests/qtest/npcm_gmac-test.c | 84 +---- hw/arm/Kconfig | 5 + hw/arm/meson.build | 1 + tests/data/acpi/virt/FACP | Bin 276 -> 276 bytes tests/data/acpi/virt/GTDT | Bin 96 -> 104 bytes tests/qtest/meson.build | 4 +- 36 files changed, 1184 insertions(+), 222 deletions(-) create mode 100644 hw/arm/mps3r.c From: Philippe Mathieu-Daudé <philmd@linaro.org> Similarly to commits dadbb58f59..5ae79fe825 for other ARM boards, connect FIQ output of the GIC CPU interfaces to the CPU. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240130152548.17855-1-philmd@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/xilinx_zynq.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/hw/arm/xilinx_zynq.c b/hw/arm/xilinx_zynq.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xilinx_zynq.c +++ b/hw/arm/xilinx_zynq.c @@ -XXX,XX +XXX,XX @@ static void zynq_init(MachineState *machine) sysbus_mmio_map(busdev, 0, MPCORE_PERIPHBASE); sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ)); + sysbus_connect_irq(busdev, 1, + qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_FIQ)); for (n = 0; n < 64; n++) { pic[n] = qdev_get_gpio_in(dev, n); -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> The API does not generate an error for setting ASYNC | SYNC; that merely constrains the selection vs the per-cpu default. For qemu linux-user, choose SYNC as the default. Cc: qemu-stable@nongnu.org Reported-by: Gustavo Romero <gustavo.romero@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Gustavo Romero <gustavo.romero@linaro.org> Message-id: 20240207025210.8837-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/aarch64/target_prctl.h | 29 +++++++++++++++++------------ 1 file changed, 17 insertions(+), 12 deletions(-) diff --git a/linux-user/aarch64/target_prctl.h b/linux-user/aarch64/target_prctl.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/target_prctl.h +++ b/linux-user/aarch64/target_prctl.h @@ -XXX,XX +XXX,XX @@ static abi_long do_prctl_set_tagged_addr_ctrl(CPUArchState *env, abi_long arg2) env->tagged_addr_enable = arg2 & PR_TAGGED_ADDR_ENABLE; if (cpu_isar_feature(aa64_mte, cpu)) { - switch (arg2 & PR_MTE_TCF_MASK) { - case PR_MTE_TCF_NONE: - case PR_MTE_TCF_SYNC: - case PR_MTE_TCF_ASYNC: - break; - default: - return -EINVAL; - } - /* * Write PR_MTE_TCF to SCTLR_EL1[TCF0]. - * Note that the syscall values are consistent with hw. + * + * The kernel has a per-cpu configuration for the sysadmin, + * /sys/devices/system/cpu/cpu<N>/mte_tcf_preferred, + * which qemu does not implement. + * + * Because there is no performance difference between the modes, and + * because SYNC is most useful for debugging MTE errors, choose SYNC + * as the preferred mode. With this preference, and the way the API + * uses only two bits, there is no way for the program to select + * ASYMM mode. */ - env->cp15.sctlr_el[1] = - deposit64(env->cp15.sctlr_el[1], 38, 2, arg2 >> PR_MTE_TCF_SHIFT); + unsigned tcf = 0; + if (arg2 & PR_MTE_TCF_SYNC) { + tcf = 1; + } else if (arg2 & PR_MTE_TCF_ASYNC) { + tcf = 2; + } + env->cp15.sctlr_el[1] = deposit64(env->cp15.sctlr_el[1], 38, 2, tcf); /* * Write PR_MTE_TAG to GCR_EL1[Exclude]. -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> The field is encoded as [0-3], which is convenient for indexing our array of function pointers, but the true value is [1-4]. Adjust before calling do_mem_zpa. Add an assert, and move the comment re passing ZT to the helper back next to the relevant code. Cc: qemu-stable@nongnu.org Fixes: 206adacfb8d ("target/arm: Add mte helpers for sve scalar + int loads") Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Gustavo Romero <gustavo.romero@linaro.org> Message-id: 20240207025210.8837-3-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/translate-sve.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/target/arm/tcg/translate-sve.c b/target/arm/tcg/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-sve.c +++ b/target/arm/tcg/translate-sve.c @@ -XXX,XX +XXX,XX @@ static void do_mem_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr, TCGv_ptr t_pg; int desc = 0; - /* - * For e.g. LD4, there are not enough arguments to pass all 4 - * registers as pointers, so encode the regno into the data field. - * For consistency, do this even for LD1. - */ + assert(mte_n >= 1 && mte_n <= 4); if (s->mte_active[0]) { int msz = dtype_msz(dtype); @@ -XXX,XX +XXX,XX @@ static void do_mem_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr, addr = clean_data_tbi(s, addr); } + /* + * For e.g. LD4, there are not enough arguments to pass all 4 + * registers as pointers, so encode the regno into the data field. + * For consistency, do this even for LD1. + */ desc = simd_desc(vsz, vsz, zt | desc); t_pg = tcg_temp_new_ptr(); @@ -XXX,XX +XXX,XX @@ static void do_ld_zpa(DisasContext *s, int zt, int pg, * accessible via the instruction encoding. */ assert(fn != NULL); - do_mem_zpa(s, zt, pg, addr, dtype, nreg, false, fn); + do_mem_zpa(s, zt, pg, addr, dtype, nreg + 1, false, fn); } static bool trans_LD_zprr(DisasContext *s, arg_rprr_load *a) @@ -XXX,XX +XXX,XX @@ static void do_st_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr, if (nreg == 0) { /* ST1 */ fn = fn_single[s->mte_active[0]][be][msz][esz]; - nreg = 1; } else { /* ST2, ST3, ST4 -- msz == esz, enforced by encoding */ assert(msz == esz); fn = fn_multiple[s->mte_active[0]][be][nreg - 1][msz]; } assert(fn != NULL); - do_mem_zpa(s, zt, pg, addr, msz_dtype(s, msz), nreg, true, fn); + do_mem_zpa(s, zt, pg, addr, msz_dtype(s, msz), nreg + 1, true, fn); } static bool trans_ST_zprr(DisasContext *s, arg_rprr_store *a) -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> When we added SVE_MTEDESC_SHIFT, we effectively limited the maximum size of MTEDESC. Adjust SIZEM1 to consume the remaining bits (32 - 10 - 5 - 12 == 5). Assert that the data to be stored fits within the field (expecting 8 * 4 - 1 == 31, exact fit). Cc: qemu-stable@nongnu.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Gustavo Romero <gustavo.romero@linaro.org> Message-id: 20240207025210.8837-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 2 +- target/arm/tcg/translate-sve.c | 7 ++++--- 2 files changed, 5 insertions(+), 4 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ FIELD(MTEDESC, TBI, 4, 2) FIELD(MTEDESC, TCMA, 6, 2) FIELD(MTEDESC, WRITE, 8, 1) FIELD(MTEDESC, ALIGN, 9, 3) -FIELD(MTEDESC, SIZEM1, 12, SIMD_DATA_BITS - 12) /* size - 1 */ +FIELD(MTEDESC, SIZEM1, 12, SIMD_DATA_BITS - SVE_MTEDESC_SHIFT - 12) /* size - 1 */ bool mte_probe(CPUARMState *env, uint32_t desc, uint64_t ptr); uint64_t mte_check(CPUARMState *env, uint32_t desc, uint64_t ptr, uintptr_t ra); diff --git a/target/arm/tcg/translate-sve.c b/target/arm/tcg/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-sve.c +++ b/target/arm/tcg/translate-sve.c @@ -XXX,XX +XXX,XX @@ static void do_mem_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr, { unsigned vsz = vec_full_reg_size(s); TCGv_ptr t_pg; + uint32_t sizem1; int desc = 0; assert(mte_n >= 1 && mte_n <= 4); + sizem1 = (mte_n << dtype_msz(dtype)) - 1; + assert(sizem1 <= R_MTEDESC_SIZEM1_MASK >> R_MTEDESC_SIZEM1_SHIFT); if (s->mte_active[0]) { - int msz = dtype_msz(dtype); - desc = FIELD_DP32(desc, MTEDESC, MIDX, get_mem_index(s)); desc = FIELD_DP32(desc, MTEDESC, TBI, s->tbid); desc = FIELD_DP32(desc, MTEDESC, TCMA, s->tcma); desc = FIELD_DP32(desc, MTEDESC, WRITE, is_write); - desc = FIELD_DP32(desc, MTEDESC, SIZEM1, (mte_n << msz) - 1); + desc = FIELD_DP32(desc, MTEDESC, SIZEM1, sizem1); desc <<= SVE_MTEDESC_SHIFT; } else { addr = clean_data_tbi(s, addr); -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Share code that creates mtedesc and embeds within simd_desc. Cc: qemu-stable@nongnu.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Gustavo Romero <gustavo.romero@linaro.org> Message-id: 20240207025210.8837-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/translate-a64.h | 2 ++ target/arm/tcg/translate-sme.c | 15 +++-------- target/arm/tcg/translate-sve.c | 47 ++++++++++++++++++---------------- 3 files changed, 31 insertions(+), 33 deletions(-) diff --git a/target/arm/tcg/translate-a64.h b/target/arm/tcg/translate-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.h +++ b/target/arm/tcg/translate-a64.h @@ -XXX,XX +XXX,XX @@ bool logic_imm_decode_wmask(uint64_t *result, unsigned int immn, bool sve_access_check(DisasContext *s); bool sme_enabled_check(DisasContext *s); bool sme_enabled_check_with_svcr(DisasContext *s, unsigned); +uint32_t make_svemte_desc(DisasContext *s, unsigned vsz, uint32_t nregs, + uint32_t msz, bool is_write, uint32_t data); /* This function corresponds to CheckStreamingSVEEnabled. */ static inline bool sme_sm_enabled_check(DisasContext *s) diff --git a/target/arm/tcg/translate-sme.c b/target/arm/tcg/translate-sme.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-sme.c +++ b/target/arm/tcg/translate-sme.c @@ -XXX,XX +XXX,XX @@ static bool trans_LDST1(DisasContext *s, arg_LDST1 *a) TCGv_ptr t_za, t_pg; TCGv_i64 addr; - int svl, desc = 0; + uint32_t desc; bool be = s->be_data == MO_BE; bool mte = s->mte_active[0]; @@ -XXX,XX +XXX,XX @@ static bool trans_LDST1(DisasContext *s, arg_LDST1 *a) tcg_gen_shli_i64(addr, cpu_reg(s, a->rm), a->esz); tcg_gen_add_i64(addr, addr, cpu_reg_sp(s, a->rn)); - if (mte) { - desc = FIELD_DP32(desc, MTEDESC, MIDX, get_mem_index(s)); - desc = FIELD_DP32(desc, MTEDESC, TBI, s->tbid); - desc = FIELD_DP32(desc, MTEDESC, TCMA, s->tcma); - desc = FIELD_DP32(desc, MTEDESC, WRITE, a->st); - desc = FIELD_DP32(desc, MTEDESC, SIZEM1, (1 << a->esz) - 1); - desc <<= SVE_MTEDESC_SHIFT; - } else { + if (!mte) { addr = clean_data_tbi(s, addr); } - svl = streaming_vec_reg_size(s); - desc = simd_desc(svl, svl, desc); + + desc = make_svemte_desc(s, streaming_vec_reg_size(s), 1, a->esz, a->st, 0); fns[a->esz][be][a->v][mte][a->st](tcg_env, t_za, t_pg, addr, tcg_constant_i32(desc)); diff --git a/target/arm/tcg/translate-sve.c b/target/arm/tcg/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-sve.c +++ b/target/arm/tcg/translate-sve.c @@ -XXX,XX +XXX,XX @@ static const uint8_t dtype_esz[16] = { 3, 2, 1, 3 }; -static void do_mem_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr, - int dtype, uint32_t mte_n, bool is_write, - gen_helper_gvec_mem *fn) +uint32_t make_svemte_desc(DisasContext *s, unsigned vsz, uint32_t nregs, + uint32_t msz, bool is_write, uint32_t data) { - unsigned vsz = vec_full_reg_size(s); - TCGv_ptr t_pg; uint32_t sizem1; - int desc = 0; + uint32_t desc = 0; - assert(mte_n >= 1 && mte_n <= 4); - sizem1 = (mte_n << dtype_msz(dtype)) - 1; + /* Assert all of the data fits, with or without MTE enabled. */ + assert(nregs >= 1 && nregs <= 4); + sizem1 = (nregs << msz) - 1; assert(sizem1 <= R_MTEDESC_SIZEM1_MASK >> R_MTEDESC_SIZEM1_SHIFT); + assert(data < 1u << SVE_MTEDESC_SHIFT); + if (s->mte_active[0]) { desc = FIELD_DP32(desc, MTEDESC, MIDX, get_mem_index(s)); desc = FIELD_DP32(desc, MTEDESC, TBI, s->tbid); @@ -XXX,XX +XXX,XX @@ static void do_mem_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr, desc = FIELD_DP32(desc, MTEDESC, WRITE, is_write); desc = FIELD_DP32(desc, MTEDESC, SIZEM1, sizem1); desc <<= SVE_MTEDESC_SHIFT; - } else { + } + return simd_desc(vsz, vsz, desc | data); +} + +static void do_mem_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr, + int dtype, uint32_t nregs, bool is_write, + gen_helper_gvec_mem *fn) +{ + TCGv_ptr t_pg; + uint32_t desc; + + if (!s->mte_active[0]) { addr = clean_data_tbi(s, addr); } @@ -XXX,XX +XXX,XX @@ static void do_mem_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr, * registers as pointers, so encode the regno into the data field. * For consistency, do this even for LD1. */ - desc = simd_desc(vsz, vsz, zt | desc); + desc = make_svemte_desc(s, vec_full_reg_size(s), nregs, + dtype_msz(dtype), is_write, zt); t_pg = tcg_temp_new_ptr(); tcg_gen_addi_ptr(t_pg, tcg_env, pred_full_reg_offset(s, pg)); @@ -XXX,XX +XXX,XX @@ static void do_mem_zpz(DisasContext *s, int zt, int pg, int zm, int scale, TCGv_i64 scalar, int msz, bool is_write, gen_helper_gvec_mem_scatter *fn) { - unsigned vsz = vec_full_reg_size(s); TCGv_ptr t_zm = tcg_temp_new_ptr(); TCGv_ptr t_pg = tcg_temp_new_ptr(); TCGv_ptr t_zt = tcg_temp_new_ptr(); - int desc = 0; - - if (s->mte_active[0]) { - desc = FIELD_DP32(desc, MTEDESC, MIDX, get_mem_index(s)); - desc = FIELD_DP32(desc, MTEDESC, TBI, s->tbid); - desc = FIELD_DP32(desc, MTEDESC, TCMA, s->tcma); - desc = FIELD_DP32(desc, MTEDESC, WRITE, is_write); - desc = FIELD_DP32(desc, MTEDESC, SIZEM1, (1 << msz) - 1); - desc <<= SVE_MTEDESC_SHIFT; - } - desc = simd_desc(vsz, vsz, desc | scale); + uint32_t desc; tcg_gen_addi_ptr(t_pg, tcg_env, pred_full_reg_offset(s, pg)); tcg_gen_addi_ptr(t_zm, tcg_env, vec_full_reg_offset(s, zm)); tcg_gen_addi_ptr(t_zt, tcg_env, vec_full_reg_offset(s, zt)); + + desc = make_svemte_desc(s, vec_full_reg_size(s), 1, msz, is_write, scale); fn(tcg_env, t_zt, t_pg, t_zm, scalar, tcg_constant_i32(desc)); } -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> These functions "use the standard load helpers", but fail to clean_data_tbi or populate mtedesc. Cc: qemu-stable@nongnu.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Gustavo Romero <gustavo.romero@linaro.org> Message-id: 20240207025210.8837-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/translate-sve.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/target/arm/tcg/translate-sve.c b/target/arm/tcg/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-sve.c +++ b/target/arm/tcg/translate-sve.c @@ -XXX,XX +XXX,XX @@ static void do_ldrq(DisasContext *s, int zt, int pg, TCGv_i64 addr, int dtype) unsigned vsz = vec_full_reg_size(s); TCGv_ptr t_pg; int poff; + uint32_t desc; /* Load the first quadword using the normal predicated load helpers. */ + if (!s->mte_active[0]) { + addr = clean_data_tbi(s, addr); + } + poff = pred_full_reg_offset(s, pg); if (vsz > 16) { /* @@ -XXX,XX +XXX,XX @@ static void do_ldrq(DisasContext *s, int zt, int pg, TCGv_i64 addr, int dtype) gen_helper_gvec_mem *fn = ldr_fns[s->mte_active[0]][s->be_data == MO_BE][dtype][0]; - fn(tcg_env, t_pg, addr, tcg_constant_i32(simd_desc(16, 16, zt))); + desc = make_svemte_desc(s, 16, 1, dtype_msz(dtype), false, zt); + fn(tcg_env, t_pg, addr, tcg_constant_i32(desc)); /* Replicate that first quadword. */ if (vsz > 16) { @@ -XXX,XX +XXX,XX @@ static void do_ldro(DisasContext *s, int zt, int pg, TCGv_i64 addr, int dtype) unsigned vsz_r32; TCGv_ptr t_pg; int poff, doff; + uint32_t desc; if (vsz < 32) { /* @@ -XXX,XX +XXX,XX @@ static void do_ldro(DisasContext *s, int zt, int pg, TCGv_i64 addr, int dtype) } /* Load the first octaword using the normal predicated load helpers. */ + if (!s->mte_active[0]) { + addr = clean_data_tbi(s, addr); + } poff = pred_full_reg_offset(s, pg); if (vsz > 32) { @@ -XXX,XX +XXX,XX @@ static void do_ldro(DisasContext *s, int zt, int pg, TCGv_i64 addr, int dtype) gen_helper_gvec_mem *fn = ldr_fns[s->mte_active[0]][s->be_data == MO_BE][dtype][0]; - fn(tcg_env, t_pg, addr, tcg_constant_i32(simd_desc(32, 32, zt))); + desc = make_svemte_desc(s, 32, 1, dtype_msz(dtype), false, zt); + fn(tcg_env, t_pg, addr, tcg_constant_i32(desc)); /* * Replicate that first octaword. -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> The TBI and TCMA bits are located within mtedesc, not desc. Cc: qemu-stable@nongnu.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Gustavo Romero <gustavo.romero@linaro.org> Message-id: 20240207025210.8837-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/sme_helper.c | 8 ++++---- target/arm/tcg/sve_helper.c | 12 ++++++------ 2 files changed, 10 insertions(+), 10 deletions(-) diff --git a/target/arm/tcg/sme_helper.c b/target/arm/tcg/sme_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/sme_helper.c +++ b/target/arm/tcg/sme_helper.c @@ -XXX,XX +XXX,XX @@ void sme_ld1_mte(CPUARMState *env, void *za, uint64_t *vg, desc = extract32(desc, 0, SIMD_DATA_SHIFT + SVE_MTEDESC_SHIFT); /* Perform gross MTE suppression early. */ - if (!tbi_check(desc, bit55) || - tcma_check(desc, bit55, allocation_tag_from_addr(addr))) { + if (!tbi_check(mtedesc, bit55) || + tcma_check(mtedesc, bit55, allocation_tag_from_addr(addr))) { mtedesc = 0; } @@ -XXX,XX +XXX,XX @@ void sme_st1_mte(CPUARMState *env, void *za, uint64_t *vg, target_ulong addr, desc = extract32(desc, 0, SIMD_DATA_SHIFT + SVE_MTEDESC_SHIFT); /* Perform gross MTE suppression early. */ - if (!tbi_check(desc, bit55) || - tcma_check(desc, bit55, allocation_tag_from_addr(addr))) { + if (!tbi_check(mtedesc, bit55) || + tcma_check(mtedesc, bit55, allocation_tag_from_addr(addr))) { mtedesc = 0; } diff --git a/target/arm/tcg/sve_helper.c b/target/arm/tcg/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/sve_helper.c +++ b/target/arm/tcg/sve_helper.c @@ -XXX,XX +XXX,XX @@ void sve_ldN_r_mte(CPUARMState *env, uint64_t *vg, target_ulong addr, desc = extract32(desc, 0, SIMD_DATA_SHIFT + SVE_MTEDESC_SHIFT); /* Perform gross MTE suppression early. */ - if (!tbi_check(desc, bit55) || - tcma_check(desc, bit55, allocation_tag_from_addr(addr))) { + if (!tbi_check(mtedesc, bit55) || + tcma_check(mtedesc, bit55, allocation_tag_from_addr(addr))) { mtedesc = 0; } @@ -XXX,XX +XXX,XX @@ void sve_ldnfff1_r_mte(CPUARMState *env, void *vg, target_ulong addr, desc = extract32(desc, 0, SIMD_DATA_SHIFT + SVE_MTEDESC_SHIFT); /* Perform gross MTE suppression early. */ - if (!tbi_check(desc, bit55) || - tcma_check(desc, bit55, allocation_tag_from_addr(addr))) { + if (!tbi_check(mtedesc, bit55) || + tcma_check(mtedesc, bit55, allocation_tag_from_addr(addr))) { mtedesc = 0; } @@ -XXX,XX +XXX,XX @@ void sve_stN_r_mte(CPUARMState *env, uint64_t *vg, target_ulong addr, desc = extract32(desc, 0, SIMD_DATA_SHIFT + SVE_MTEDESC_SHIFT); /* Perform gross MTE suppression early. */ - if (!tbi_check(desc, bit55) || - tcma_check(desc, bit55, allocation_tag_from_addr(addr))) { + if (!tbi_check(mtedesc, bit55) || + tcma_check(mtedesc, bit55, allocation_tag_from_addr(addr))) { mtedesc = 0; } -- 2.34.1 The raven_io_ops MemoryRegionOps is the only one in the source tree which sets .valid.unaligned to indicate that it should support unaligned accesses and which does not also set .impl.unaligned to indicate that its read and write functions can do the unaligned handling themselves. This is a problem, because at the moment the core memory system does not implement the support for handling unaligned accesses by doing a series of aligned accesses and combining them (system/memory.c:access_with_adjusted_size() has a TODO comment noting this). Fortunately raven_io_read() and raven_io_write() will correctly deal with the case of being passed an unaligned address, so we can fix the missing unaligned access support by setting .impl.unaligned in the MemoryRegionOps struct. Fixes: 9a1839164c9c8f06 ("raven: Implement non-contiguous I/O region") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Message-id: 20240112134640.1775041-1-peter.maydell@linaro.org --- hw/pci-host/raven.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/pci-host/raven.c b/hw/pci-host/raven.c index XXXXXXX..XXXXXXX 100644 --- a/hw/pci-host/raven.c +++ b/hw/pci-host/raven.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps raven_io_ops = { .write = raven_io_write, .endianness = DEVICE_LITTLE_ENDIAN, .impl.max_access_size = 4, + .impl.unaligned = true, .valid.unaligned = true, }; -- 2.34.1 Suppress the deprecation warning when we're running under qtest, to avoid "make check" including warning messages in its output. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206154151.155620-1-peter.maydell@linaro.org --- hw/block/tc58128.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/hw/block/tc58128.c b/hw/block/tc58128.c index XXXXXXX..XXXXXXX 100644 --- a/hw/block/tc58128.c +++ b/hw/block/tc58128.c @@ -XXX,XX +XXX,XX @@ static sh7750_io_device tc58128 = { int tc58128_init(struct SH7750State *s, const char *zone1, const char *zone2) { - warn_report_once("The TC58128 flash device is deprecated"); + if (!qtest_enabled()) { + warn_report_once("The TC58128 flash device is deprecated"); + } init_dev(&tc58128_devs[0], zone1); init_dev(&tc58128_devs[1], zone2); return sh7750_register_io_device(s, &tc58128); -- 2.34.1 We deliberately don't include qtests_npcm7xx in qtests_aarch64, because we already get the coverage of those tests via qtests_arm, and we don't want to use extra CI minutes testing them twice. In commit 327b680877b79c4b we added it to qtests_aarch64; revert that change. Fixes: 327b680877b79c4b ("tests/qtest: Creating qtest for GMAC Module") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206163043.315535-1-peter.maydell@linaro.org --- tests/qtest/meson.build | 1 - 1 file changed, 1 deletion(-) diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_aarch64 = \ (config_all_devices.has_key('CONFIG_RASPI') ? ['bcm2835-dma-test'] : []) + \ (config_all_accel.has_key('CONFIG_TCG') and \ config_all_devices.has_key('CONFIG_TPM_TIS_I2C') ? ['tpm-tis-i2c-test'] : []) + \ - (config_all_devices.has_key('CONFIG_NPCM7XX') ? qtests_npcm7xx : []) + \ ['arm-cpu-features', 'numa-test', 'boot-serial-test', -- 2.34.1 Allow changes to the virt GTDT -- we are going to add the IRQ entry for a new timer to it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Message-id: 20240122143537.233498-2-peter.maydell@linaro.org --- tests/qtest/bios-tables-test-allowed-diff.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test-allowed-diff.h +++ b/tests/qtest/bios-tables-test-allowed-diff.h @@ -1 +1,3 @@ /* List of comma-separated changed AML files to ignore */ +"tests/data/acpi/virt/FACP", +"tests/data/acpi/virt/GTDT", -- 2.34.1 Armv8.1+ CPUs have the Virtual Host Extension (VHE) which adds a non-secure EL2 virtual timer. We implemented the timer itself in the CPU model, but never wired up its IRQ line to the GIC. Wire up the IRQ line (this is always safe whether the CPU has the interrupt or not, since it always creates the outbound IRQ line). Report it to the guest via dtb and ACPI if the CPU has the feature. The DTB binding is documented in the kernel's Documentation/devicetree/bindings/timer/arm\,arch_timer.yaml and the ACPI table entries are documented in the ACPI specification version 6.3 or later. Because the IRQ line ACPI binding is new in 6.3, we need to bump the FADT table rev to show that we might be using 6.3 features. Note that exposing this IRQ in the DTB will trigger a bug in EDK2 versions prior to edk2-stable202311, for users who use the virt board with 'virtualization=on' to enable EL2 emulation and are booting an EDK2 guest BIOS, if that EDK2 has assertions enabled. The effect is that EDK2 will assert on bootup: ASSERT [ArmTimerDxe] /home/kraxel/projects/qemu/roms/edk2/ArmVirtPkg/Library/ArmVirtTimerFdtClientLib/ArmVirtTimerFdtClientLib.c(72): PropSize == 36 || PropSize == 48 If you see that assertion you should do one of: * update your EDK2 binaries to edk2-stable202311 or newer * use the 'virt-8.2' versioned machine type * not use 'virtualization=on' (The versions shipped with QEMU itself have the fix.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Message-id: 20240122143537.233498-3-peter.maydell@linaro.org --- include/hw/arm/virt.h | 2 ++ hw/arm/virt-acpi-build.c | 20 ++++++++++---- hw/arm/virt.c | 60 ++++++++++++++++++++++++++++++++++------ 3 files changed, 67 insertions(+), 15 deletions(-) diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -XXX,XX +XXX,XX @@ struct VirtMachineClass { /* Machines < 6.2 have no support for describing cpu topology to guest */ bool no_cpu_topology; bool no_tcg_lpa2; + bool no_ns_el2_virt_timer_irq; }; struct VirtMachineState { @@ -XXX,XX +XXX,XX @@ struct VirtMachineState { PCIBus *bus; char *oem_id; char *oem_table_id; + bool ns_el2_virt_timer_irq; }; #define VIRT_ECAM_ID(high) (high ? VIRT_HIGH_PCIE_ECAM : VIRT_PCIE_ECAM) diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt-acpi-build.c +++ b/hw/arm/virt-acpi-build.c @@ -XXX,XX +XXX,XX @@ build_srat(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) } /* - * ACPI spec, Revision 5.1 - * 5.2.24 Generic Timer Description Table (GTDT) + * ACPI spec, Revision 6.5 + * 5.2.25 Generic Timer Description Table (GTDT) */ static void build_gtdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) @@ -XXX,XX +XXX,XX @@ build_gtdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) uint32_t irqflags = vmc->claim_edge_triggered_timers ? 1 : /* Interrupt is Edge triggered */ 0; /* Interrupt is Level triggered */ - AcpiTable table = { .sig = "GTDT", .rev = 2, .oem_id = vms->oem_id, + AcpiTable table = { .sig = "GTDT", .rev = 3, .oem_id = vms->oem_id, .oem_table_id = vms->oem_table_id }; acpi_table_begin(&table, table_data); @@ -XXX,XX +XXX,XX @@ build_gtdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) build_append_int_noprefix(table_data, 0, 4); /* Platform Timer Offset */ build_append_int_noprefix(table_data, 0, 4); - + if (vms->ns_el2_virt_timer_irq) { + /* Virtual EL2 Timer GSIV */ + build_append_int_noprefix(table_data, ARCH_TIMER_NS_EL2_VIRT_IRQ, 4); + /* Virtual EL2 Timer Flags */ + build_append_int_noprefix(table_data, irqflags, 4); + } else { + build_append_int_noprefix(table_data, 0, 4); + build_append_int_noprefix(table_data, 0, 4); + } acpi_table_end(linker, &table); } @@ -XXX,XX +XXX,XX @@ build_madt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) static void build_fadt_rev6(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms, unsigned dsdt_tbl_offset) { - /* ACPI v6.0 */ + /* ACPI v6.3 */ AcpiFadtData fadt = { .rev = 6, - .minor_ver = 0, + .minor_ver = 3, .flags = 1 << ACPI_FADT_F_HW_REDUCED_ACPI, .xdsdt_tbl_offset = &dsdt_tbl_offset, }; diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void create_randomness(MachineState *ms, const char *node) qemu_fdt_setprop(ms->fdt, node, "rng-seed", seed.rng, sizeof(seed.rng)); } +/* + * The CPU object always exposes the NS EL2 virt timer IRQ line, + * but we don't want to advertise it to the guest in the dtb or ACPI + * table unless it's really going to do something. + */ +static bool ns_el2_virt_timer_present(void) +{ + ARMCPU *cpu = ARM_CPU(qemu_get_cpu(0)); + CPUARMState *env = &cpu->env; + + return arm_feature(env, ARM_FEATURE_AARCH64) && + arm_feature(env, ARM_FEATURE_EL2) && cpu_isar_feature(aa64_vh, cpu); +} + static void create_fdt(VirtMachineState *vms) { MachineState *ms = MACHINE(vms); @@ -XXX,XX +XXX,XX @@ static void fdt_add_timer_nodes(const VirtMachineState *vms) "arm,armv7-timer"); } qemu_fdt_setprop(ms->fdt, "/timer", "always-on", NULL, 0); - qemu_fdt_setprop_cells(ms->fdt, "/timer", "interrupts", - GIC_FDT_IRQ_TYPE_PPI, - INTID_TO_PPI(ARCH_TIMER_S_EL1_IRQ), irqflags, - GIC_FDT_IRQ_TYPE_PPI, - INTID_TO_PPI(ARCH_TIMER_NS_EL1_IRQ), irqflags, - GIC_FDT_IRQ_TYPE_PPI, - INTID_TO_PPI(ARCH_TIMER_VIRT_IRQ), irqflags, - GIC_FDT_IRQ_TYPE_PPI, - INTID_TO_PPI(ARCH_TIMER_NS_EL2_IRQ), irqflags); + if (vms->ns_el2_virt_timer_irq) { + qemu_fdt_setprop_cells(ms->fdt, "/timer", "interrupts", + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_S_EL1_IRQ), irqflags, + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_NS_EL1_IRQ), irqflags, + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_VIRT_IRQ), irqflags, + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_NS_EL2_IRQ), irqflags, + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_NS_EL2_VIRT_IRQ), irqflags); + } else { + qemu_fdt_setprop_cells(ms->fdt, "/timer", "interrupts", + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_S_EL1_IRQ), irqflags, + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_NS_EL1_IRQ), irqflags, + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_VIRT_IRQ), irqflags, + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_NS_EL2_IRQ), irqflags); + } } static void fdt_add_cpu_nodes(const VirtMachineState *vms) @@ -XXX,XX +XXX,XX @@ static void create_gic(VirtMachineState *vms, MemoryRegion *mem) [GTIMER_VIRT] = ARCH_TIMER_VIRT_IRQ, [GTIMER_HYP] = ARCH_TIMER_NS_EL2_IRQ, [GTIMER_SEC] = ARCH_TIMER_S_EL1_IRQ, + [GTIMER_HYPVIRT] = ARCH_TIMER_NS_EL2_VIRT_IRQ, }; for (unsigned irq = 0; irq < ARRAY_SIZE(timer_irq); irq++) { @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) qdev_realize(DEVICE(cpuobj), NULL, &error_fatal); object_unref(cpuobj); } + + /* Now we've created the CPUs we can see if they have the hypvirt timer */ + vms->ns_el2_virt_timer_irq = ns_el2_virt_timer_present() && + !vmc->no_ns_el2_virt_timer_irq; + fdt_add_timer_nodes(vms); fdt_add_cpu_nodes(vms); @@ -XXX,XX +XXX,XX @@ DEFINE_VIRT_MACHINE_AS_LATEST(9, 0) static void virt_machine_8_2_options(MachineClass *mc) { + VirtMachineClass *vmc = VIRT_MACHINE_CLASS(OBJECT_CLASS(mc)); + virt_machine_9_0_options(mc); compat_props_add(mc->compat_props, hw_compat_8_2, hw_compat_8_2_len); + /* + * Don't expose NS_EL2_VIRT timer IRQ in DTB on ACPI on 8.2 and + * earlier machines. (Exposing it tickles a bug in older EDK2 + * guest BIOS binaries.) + */ + vmc->no_ns_el2_virt_timer_irq = true; } DEFINE_VIRT_MACHINE(8, 2) -- 2.34.1 Update the virt golden reference files to say that the FACP is ACPI v6.3, and the GTDT table is a revision 3 table with space for the virtual EL2 timer. Diffs from iasl: @@ -XXX,XX +XXX,XX @@ /* * Intel ACPI Component Architecture * AML/ASL+ Disassembler version 20200925 (64-bit version) * Copyright (c) 2000 - 2020 Intel Corporation * - * Disassembly of tests/data/acpi/virt/FACP, Mon Jan 22 13:48:40 2024 + * Disassembly of /tmp/aml-W8RZH2, Mon Jan 22 13:48:40 2024 * * ACPI Data Table [FACP] * * Format: [HexOffset DecimalOffset ByteLength] FieldName : FieldValue */ [000h 0000 4] Signature : "FACP" [Fixed ACPI Description Table (FADT)] [004h 0004 4] Table Length : 00000114 [008h 0008 1] Revision : 06 -[009h 0009 1] Checksum : 15 +[009h 0009 1] Checksum : 12 [00Ah 0010 6] Oem ID : "BOCHS " [010h 0016 8] Oem Table ID : "BXPC " [018h 0024 4] Oem Revision : 00000001 [01Ch 0028 4] Asl Compiler ID : "BXPC" [020h 0032 4] Asl Compiler Revision : 00000001 [024h 0036 4] FACS Address : 00000000 [028h 0040 4] DSDT Address : 00000000 [02Ch 0044 1] Model : 00 [02Dh 0045 1] PM Profile : 00 [Unspecified] [02Eh 0046 2] SCI Interrupt : 0000 [030h 0048 4] SMI Command Port : 00000000 [034h 0052 1] ACPI Enable Value : 00 [035h 0053 1] ACPI Disable Value : 00 [036h 0054 1] S4BIOS Command : 00 [037h 0055 1] P-State Control : 00 @@ -XXX,XX +XXX,XX @@ Use APIC Physical Destination Mode (V4) : 0 Hardware Reduced (V5) : 1 Low Power S0 Idle (V5) : 0 [074h 0116 12] Reset Register : [Generic Address Structure] [074h 0116 1] Space ID : 00 [SystemMemory] [075h 0117 1] Bit Width : 00 [076h 0118 1] Bit Offset : 00 [077h 0119 1] Encoded Access Width : 00 [Undefined/Legacy] [078h 0120 8] Address : 0000000000000000 [080h 0128 1] Value to cause reset : 00 [081h 0129 2] ARM Flags (decoded below) : 0003 PSCI Compliant : 1 Must use HVC for PSCI : 1 -[083h 0131 1] FADT Minor Revision : 00 +[083h 0131 1] FADT Minor Revision : 03 [084h 0132 8] FACS Address : 0000000000000000 [08Ch 0140 8] DSDT Address : 0000000000000000 [094h 0148 12] PM1A Event Block : [Generic Address Structure] [094h 0148 1] Space ID : 00 [SystemMemory] [095h 0149 1] Bit Width : 00 [096h 0150 1] Bit Offset : 00 [097h 0151 1] Encoded Access Width : 00 [Undefined/Legacy] [098h 0152 8] Address : 0000000000000000 [0A0h 0160 12] PM1B Event Block : [Generic Address Structure] [0A0h 0160 1] Space ID : 00 [SystemMemory] [0A1h 0161 1] Bit Width : 00 [0A2h 0162 1] Bit Offset : 00 [0A3h 0163 1] Encoded Access Width : 00 [Undefined/Legacy] [0A4h 0164 8] Address : 0000000000000000 @@ -XXX,XX +XXX,XX @@ [0F5h 0245 1] Bit Width : 00 [0F6h 0246 1] Bit Offset : 00 [0F7h 0247 1] Encoded Access Width : 00 [Undefined/Legacy] [0F8h 0248 8] Address : 0000000000000000 [100h 0256 12] Sleep Status Register : [Generic Address Structure] [100h 0256 1] Space ID : 00 [SystemMemory] [101h 0257 1] Bit Width : 00 [102h 0258 1] Bit Offset : 00 [103h 0259 1] Encoded Access Width : 00 [Undefined/Legacy] [104h 0260 8] Address : 0000000000000000 [10Ch 0268 8] Hypervisor ID : 00000000554D4551 Raw Table Data: Length 276 (0x114) - 0000: 46 41 43 50 14 01 00 00 06 15 42 4F 43 48 53 20 // FACP......BOCHS + 0000: 46 41 43 50 14 01 00 00 06 12 42 4F 43 48 53 20 // FACP......BOCHS 0010: 42 58 50 43 20 20 20 20 01 00 00 00 42 58 50 43 // BXPC ....BXPC 0020: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 0040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 0050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 0060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 0070: 00 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ - 0080: 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ + 0080: 00 03 00 03 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 0090: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 00A0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 00B0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 00C0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 00D0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 00E0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 00F0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 0100: 00 00 00 00 00 00 00 00 00 00 00 00 51 45 4D 55 // ............QEMU 0110: 00 00 00 00 // .... @@ -XXX,XX +XXX,XX @@ /* * Intel ACPI Component Architecture * AML/ASL+ Disassembler version 20200925 (64-bit version) * Copyright (c) 2000 - 2020 Intel Corporation * - * Disassembly of tests/data/acpi/virt/GTDT, Mon Jan 22 13:48:40 2024 + * Disassembly of /tmp/aml-XDSZH2, Mon Jan 22 13:48:40 2024 * * ACPI Data Table [GTDT] * * Format: [HexOffset DecimalOffset ByteLength] FieldName : FieldValue */ [000h 0000 4] Signature : "GTDT" [Generic Timer Description Table] -[004h 0004 4] Table Length : 00000060 -[008h 0008 1] Revision : 02 -[009h 0009 1] Checksum : 9C +[004h 0004 4] Table Length : 00000068 +[008h 0008 1] Revision : 03 +[009h 0009 1] Checksum : 93 [00Ah 0010 6] Oem ID : "BOCHS " [010h 0016 8] Oem Table ID : "BXPC " [018h 0024 4] Oem Revision : 00000001 [01Ch 0028 4] Asl Compiler ID : "BXPC" [020h 0032 4] Asl Compiler Revision : 00000001 [024h 0036 8] Counter Block Address : FFFFFFFFFFFFFFFF [02Ch 0044 4] Reserved : 00000000 [030h 0048 4] Secure EL1 Interrupt : 0000001D [034h 0052 4] EL1 Flags (decoded below) : 00000000 Trigger Mode : 0 Polarity : 0 Always On : 0 [038h 0056 4] Non-Secure EL1 Interrupt : 0000001E @@ -XXX,XX +XXX,XX @@ [040h 0064 4] Virtual Timer Interrupt : 0000001B [044h 0068 4] VT Flags (decoded below) : 00000000 Trigger Mode : 0 Polarity : 0 Always On : 0 [048h 0072 4] Non-Secure EL2 Interrupt : 0000001A [04Ch 0076 4] NEL2 Flags (decoded below) : 00000000 Trigger Mode : 0 Polarity : 0 Always On : 0 [050h 0080 8] Counter Read Block Address : FFFFFFFFFFFFFFFF [058h 0088 4] Platform Timer Count : 00000000 [05Ch 0092 4] Platform Timer Offset : 00000000 +[060h 0096 4] Virtual EL2 Timer GSIV : 00000000 +[064h 0100 4] Virtual EL2 Timer Flags : 00000000 -Raw Table Data: Length 96 (0x60) +Raw Table Data: Length 104 (0x68) - 0000: 47 54 44 54 60 00 00 00 02 9C 42 4F 43 48 53 20 // GTDT`.....BOCHS + 0000: 47 54 44 54 68 00 00 00 03 93 42 4F 43 48 53 20 // GTDTh.....BOCHS 0010: 42 58 50 43 20 20 20 20 01 00 00 00 42 58 50 43 // BXPC ....BXPC 0020: 01 00 00 00 FF FF FF FF FF FF FF FF 00 00 00 00 // ................ 0030: 1D 00 00 00 00 00 00 00 1E 00 00 00 04 00 00 00 // ................ 0040: 1B 00 00 00 00 00 00 00 1A 00 00 00 00 00 00 00 // ................ 0050: FF FF FF FF FF FF FF FF 00 00 00 00 00 00 00 00 // ................ + 0060: 00 00 00 00 00 00 00 00 // ........ Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Message-id: 20240122143537.233498-4-peter.maydell@linaro.org --- tests/qtest/bios-tables-test-allowed-diff.h | 2 -- tests/data/acpi/virt/FACP | Bin 276 -> 276 bytes tests/data/acpi/virt/GTDT | Bin 96 -> 104 bytes 3 files changed, 2 deletions(-) diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test-allowed-diff.h +++ b/tests/qtest/bios-tables-test-allowed-diff.h @@ -1,3 +1 @@ /* List of comma-separated changed AML files to ignore */ -"tests/data/acpi/virt/FACP", -"tests/data/acpi/virt/GTDT", diff --git a/tests/data/acpi/virt/FACP b/tests/data/acpi/virt/FACP index XXXXXXX..XXXXXXX 100644 GIT binary patch delta 25 gcmbQjG=+)F&CxkPgpq-PO=u!l<;2F$$vli407<0<)c^nh delta 28 kcmbQjG=+)F&CxkPgpq-PO>`nx<-|!<6Akz$^DuG%0AAS!ssI20 diff --git a/tests/data/acpi/virt/GTDT b/tests/data/acpi/virt/GTDT index XXXXXXX..XXXXXXX 100644 GIT binary patch delta 25 bcmYeu;BpUf3CUn!U|^m+kt>V?$N&QXMtB4L delta 16 Xcmc~u;BpUf2}xjJU|^avkt+-UB60)u -- 2.34.1 The patchset adding the GMAC ethernet to this SoC crossed in the mail with the patchset cleaning up the NIC handling. When we create the GMAC modules we must call qemu_configure_nic_device() so that the user has the opportunity to use the -nic commandline option to create a network backend and connect it to the GMACs. Add the missing call. Fixes: 21e5326a7c ("hw/arm: Add GMAC devices to NPCM7XX SoC") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Message-id: 20240206171231.396392-2-peter.maydell@linaro.org --- hw/arm/npcm7xx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm7xx.c +++ b/hw/arm/npcm7xx.c @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) for (i = 0; i < ARRAY_SIZE(s->gmac); i++) { SysBusDevice *sbd = SYS_BUS_DEVICE(&s->gmac[i]); + qemu_configure_nic_device(DEVICE(sbd), false, NULL); /* * The device exists regardless of whether it's connected to a QEMU * netdev backend. So always instantiate it even if there is no -- 2.34.1 Currently QEMU will warn if there is a NIC on the board that is not connected to a backend. By default the '-nic user' will get used for all NICs, but if you manually connect a specific NIC to a specific backend, then the other NICs on the board have no backend and will be warned about: qemu-system-arm: warning: nic npcm7xx-emc.1 has no peer qemu-system-arm: warning: nic npcm-gmac.0 has no peer qemu-system-arm: warning: nic npcm-gmac.1 has no peer So suppress those warnings by manually connecting every NIC on the board to some backend. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20240206171231.396392-3-peter.maydell@linaro.org --- tests/qtest/npcm7xx_emc-test.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/tests/qtest/npcm7xx_emc-test.c b/tests/qtest/npcm7xx_emc-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/npcm7xx_emc-test.c +++ b/tests/qtest/npcm7xx_emc-test.c @@ -XXX,XX +XXX,XX @@ static int *packet_test_init(int module_num, GString *cmd_line) * KISS and use -nic. The driver accepts 'emc0' and 'emc1' as aliases * in the 'model' field to specify the device to match. */ - g_string_append_printf(cmd_line, " -nic socket,fd=%d,model=emc%d ", + g_string_append_printf(cmd_line, " -nic socket,fd=%d,model=emc%d " + "-nic user,model=npcm7xx-emc " + "-nic user,model=npcm-gmac " + "-nic user,model=npcm-gmac", test_sockets[1], module_num); g_test_queue_destroy(packet_test_clear, test_sockets); -- 2.34.1 It doesn't make sense to read the value of MDCR_EL2 on a non-A-profile CPU, and in fact if you try to do it we will assert: #6 0x00007ffff4b95e96 in __GI___assert_fail (assertion=0x5555565a8c70 "!arm_feature(env, ARM_FEATURE_M)", file=0x5555565a6e5c "../../target/arm/helper.c", line=12600, function=0x5555565a9560 <__PRETTY_FUNCTION__.0> "arm_security_space_below_el3") at ./assert/assert.c:101 #7 0x0000555555ebf412 in arm_security_space_below_el3 (env=0x555557bc8190) at ../../target/arm/helper.c:12600 #8 0x0000555555ea6f89 in arm_is_el2_enabled (env=0x555557bc8190) at ../../target/arm/cpu.h:2595 #9 0x0000555555ea942f in arm_mdcr_el2_eff (env=0x555557bc8190) at ../../target/arm/internals.h:1512 We might call pmu_counter_enabled() on an M-profile CPU (for example from the migration pre/post hooks in machine.c); this should always return false because these CPUs don't set ARM_FEATURE_PMU. Avoid the assertion by not calling arm_mdcr_el2_eff() before we have done the early return for "PMU not present". This fixes an assertion failure if you try to do a loadvm or savevm for an M-profile board. Cc: qemu-stable@nongnu.org Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2155 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240208153346.970021-1-peter.maydell@linaro.org --- target/arm/helper.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool pmu_counter_enabled(CPUARMState *env, uint8_t counter) bool enabled, prohibited = false, filtered; bool secure = arm_is_secure(env); int el = arm_current_el(env); - uint64_t mdcr_el2 = arm_mdcr_el2_eff(env); - uint8_t hpmn = mdcr_el2 & MDCR_HPMN; + uint64_t mdcr_el2; + uint8_t hpmn; + /* + * We might be called for M-profile cores where MDCR_EL2 doesn't + * exist and arm_mdcr_el2_eff() will assert, so this early-exit check + * must be before we read that value. + */ if (!arm_feature(env, ARM_FEATURE_PMU)) { return false; } + mdcr_el2 = arm_mdcr_el2_eff(env); + hpmn = mdcr_el2 & MDCR_HPMN; + if (!arm_feature(env, ARM_FEATURE_EL2) || (counter < hpmn || counter == 31)) { e = env->cp15.c9_pmcr & PMCRE; -- 2.34.1 From: Nabih Estefan <nabihestefan@google.com> Fix the nocm_gmac-test.c file to run on a nuvoton 7xx machine instead of 8xx. Also fix comments referencing this and values expecting 8xx. Change-Id: Iabd0fba14910c3f1e883c4a9521350f3db9ffab8 Signed-Off-By: Nabih Estefan <nabihestefan@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Message-id: 20240208194759.2858582-2-nabihestefan@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: commit message tweaks] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/npcm_gmac-test.c | 84 +----------------------------------- tests/qtest/meson.build | 3 +- 2 files changed, 4 insertions(+), 83 deletions(-) diff --git a/tests/qtest/npcm_gmac-test.c b/tests/qtest/npcm_gmac-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/npcm_gmac-test.c +++ b/tests/qtest/npcm_gmac-test.c @@ -XXX,XX +XXX,XX @@ typedef struct TestData { const GMACModule *module; } TestData; -/* Values extracted from hw/arm/npcm8xx.c */ +/* Values extracted from hw/arm/npcm7xx.c */ static const GMACModule gmac_module_list[] = { { .irq = 14, @@ -XXX,XX +XXX,XX @@ static const GMACModule gmac_module_list[] = { .irq = 15, .base_addr = 0xf0804000 }, - { - .irq = 16, - .base_addr = 0xf0806000 - }, - { - .irq = 17, - .base_addr = 0xf0808000 - } }; /* Returns the index of the GMAC module. */ @@ -XXX,XX +XXX,XX @@ static uint32_t gmac_read(QTestState *qts, const GMACModule *mod, return qtest_readl(qts, mod->base_addr + regno); } -static uint16_t pcs_read(QTestState *qts, const GMACModule *mod, - NPCMRegister regno) -{ - uint32_t write_value = (regno & 0x3ffe00) >> 9; - qtest_writel(qts, PCS_BASE_ADDRESS + NPCM_PCS_IND_AC_BA, write_value); - uint32_t read_offset = regno & 0x1ff; - return qtest_readl(qts, PCS_BASE_ADDRESS + read_offset); -} - /* Check that GMAC registers are reset to default value */ static void test_init(gconstpointer test_data) { const TestData *td = test_data; const GMACModule *mod = td->module; - QTestState *qts = qtest_init("-machine npcm845-evb"); + QTestState *qts = qtest_init("-machine npcm750-evb"); #define CHECK_REG32(regno, value) \ do { \ g_assert_cmphex(gmac_read(qts, mod, (regno)), ==, (value)); \ } while (0) -#define CHECK_REG_PCS(regno, value) \ - do { \ - g_assert_cmphex(pcs_read(qts, mod, (regno)), ==, (value)); \ - } while (0) - CHECK_REG32(NPCM_DMA_BUS_MODE, 0x00020100); CHECK_REG32(NPCM_DMA_XMT_POLL_DEMAND, 0); CHECK_REG32(NPCM_DMA_RCV_POLL_DEMAND, 0); @@ -XXX,XX +XXX,XX @@ static void test_init(gconstpointer test_data) CHECK_REG32(NPCM_GMAC_PTP_TAR, 0); CHECK_REG32(NPCM_GMAC_PTP_TTSR, 0); - /* TODO Add registers PCS */ - if (mod->base_addr == 0xf0802000) { - CHECK_REG_PCS(NPCM_PCS_SR_CTL_ID1, 0x699e); - CHECK_REG_PCS(NPCM_PCS_SR_CTL_ID2, 0); - CHECK_REG_PCS(NPCM_PCS_SR_CTL_STS, 0x8000); - - CHECK_REG_PCS(NPCM_PCS_SR_MII_CTRL, 0x1140); - CHECK_REG_PCS(NPCM_PCS_SR_MII_STS, 0x0109); - CHECK_REG_PCS(NPCM_PCS_SR_MII_DEV_ID1, 0x699e); - CHECK_REG_PCS(NPCM_PCS_SR_MII_DEV_ID2, 0x0ced0); - CHECK_REG_PCS(NPCM_PCS_SR_MII_AN_ADV, 0x0020); - CHECK_REG_PCS(NPCM_PCS_SR_MII_LP_BABL, 0); - CHECK_REG_PCS(NPCM_PCS_SR_MII_AN_EXPN, 0); - CHECK_REG_PCS(NPCM_PCS_SR_MII_EXT_STS, 0xc000); - - CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_ABL, 0x0003); - CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_TX_MAX_DLY_LWR, 0x0038); - CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_TX_MAX_DLY_UPR, 0); - CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_TX_MIN_DLY_LWR, 0x0038); - CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_TX_MIN_DLY_UPR, 0); - CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_RX_MAX_DLY_LWR, 0x0058); - CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_RX_MAX_DLY_UPR, 0); - CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_RX_MIN_DLY_LWR, 0x0048); - CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_RX_MIN_DLY_UPR, 0); - - CHECK_REG_PCS(NPCM_PCS_VR_MII_MMD_DIG_CTRL1, 0x2400); - CHECK_REG_PCS(NPCM_PCS_VR_MII_AN_CTRL, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_AN_INTR_STS, 0x000a); - CHECK_REG_PCS(NPCM_PCS_VR_MII_TC, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_DBG_CTRL, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_EEE_MCTRL0, 0x899c); - CHECK_REG_PCS(NPCM_PCS_VR_MII_EEE_TXTIMER, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_EEE_RXTIMER, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_LINK_TIMER_CTRL, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_EEE_MCTRL1, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_DIG_STS, 0x0010); - CHECK_REG_PCS(NPCM_PCS_VR_MII_ICG_ERRCNT1, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MISC_STS, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_RX_LSTS, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_TX_BSTCTRL0, 0x00a); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_TX_LVLCTRL0, 0x007f); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_TX_GENCTRL0, 0x0001); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_TX_GENCTRL1, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_TX_STS, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_RX_GENCTRL0, 0x0100); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_RX_GENCTRL1, 0x1100); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_RX_LOS_CTRL0, 0x000e); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_MPLL_CTRL0, 0x0100); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_MPLL_CTRL1, 0x0032); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_MPLL_STS, 0x0001); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_MISC_CTRL2, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_LVL_CTRL, 0x0019); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_MISC_CTRL0, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_MISC_CTRL1, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_DIG_CTRL2, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_DIG_ERRCNT_SEL, 0); - } - qtest_quit(qts); } diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_npcm7xx = \ 'npcm7xx_sdhci-test', 'npcm7xx_smbus-test', 'npcm7xx_timer-test', - 'npcm7xx_watchdog_timer-test'] + \ + 'npcm7xx_watchdog_timer-test', + 'npcm_gmac-test'] + \ (slirp.found() ? ['npcm7xx_emc-test'] : []) qtests_aspeed = \ ['aspeed_hace-test', -- 2.34.1 From: Luc Michel <luc.michel@amd.com> An access fault is raised when the Access Flag is not set in the looked-up PTE and the AFFD field is not set in the corresponding context descriptor. This was already implemented for stage 2. Implement it for stage 1 as well. Signed-off-by: Luc Michel <luc.michel@amd.com> Reviewed-by: Mostafa Saleh <smostafa@google.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Mostafa Saleh <smostafa@google.com> Message-id: 20240213082211.3330400-1-luc.michel@amd.com [PMM: tweaked comment text] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/smmuv3-internal.h | 1 + include/hw/arm/smmu-common.h | 1 + hw/arm/smmu-common.c | 11 +++++++++++ hw/arm/smmuv3.c | 1 + 4 files changed, 14 insertions(+) diff --git a/hw/arm/smmuv3-internal.h b/hw/arm/smmuv3-internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3-internal.h +++ b/hw/arm/smmuv3-internal.h @@ -XXX,XX +XXX,XX @@ static inline int pa_range(STE *ste) #define CD_EPD(x, sel) extract32((x)->word[0], (16 * (sel)) + 14, 1) #define CD_ENDI(x) extract32((x)->word[0], 15, 1) #define CD_IPS(x) extract32((x)->word[1], 0 , 3) +#define CD_AFFD(x) extract32((x)->word[1], 3 , 1) #define CD_TBI(x) extract32((x)->word[1], 6 , 2) #define CD_HD(x) extract32((x)->word[1], 10 , 1) #define CD_HA(x) extract32((x)->word[1], 11 , 1) diff --git a/include/hw/arm/smmu-common.h b/include/hw/arm/smmu-common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/smmu-common.h +++ b/include/hw/arm/smmu-common.h @@ -XXX,XX +XXX,XX @@ typedef struct SMMUTransCfg { bool disabled; /* smmu is disabled */ bool bypassed; /* translation is bypassed */ bool aborted; /* translation is aborted */ + bool affd; /* AF fault disable */ uint32_t iotlb_hits; /* counts IOTLB hits */ uint32_t iotlb_misses; /* counts IOTLB misses*/ /* Used by stage-1 only. */ diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-common.c +++ b/hw/arm/smmu-common.c @@ -XXX,XX +XXX,XX @@ static int smmu_ptw_64_s1(SMMUTransCfg *cfg, pte_addr, pte, iova, gpa, block_size >> 20); } + + /* + * QEMU does not currently implement HTTU, so if AFFD and PTE.AF + * are 0 we take an Access flag fault. (5.4. Context Descriptor) + * An Access flag fault takes priority over a Permission fault. + */ + if (!PTE_AF(pte) && !cfg->affd) { + info->type = SMMU_PTW_ERR_ACCESS; + goto error; + } + ap = PTE_AP(pte); if (is_permission_fault(ap, perm)) { info->type = SMMU_PTW_ERR_PERMISSION; diff --git a/hw/arm/smmuv3.c b/hw/arm/smmuv3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3.c +++ b/hw/arm/smmuv3.c @@ -XXX,XX +XXX,XX @@ static int decode_cd(SMMUTransCfg *cfg, CD *cd, SMMUEventInfo *event) cfg->oas = MIN(oas2bits(SMMU_IDR5_OAS), cfg->oas); cfg->tbi = CD_TBI(cd); cfg->asid = CD_ASID(cd); + cfg->affd = CD_AFFD(cd); trace_smmuv3_decode_cd(cfg->oas); -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240213155214.13619-2-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/stellaris.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_trigger(void *opaque, int irq, int level) } } -static void stellaris_adc_reset(StellarisADCState *s) +static void stellaris_adc_reset_hold(Object *obj) { + StellarisADCState *s = STELLARIS_ADC(obj); int n; for (n = 0; n < 4; n++) { @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_init(Object *obj) memory_region_init_io(&s->iomem, obj, &stellaris_adc_ops, s, "adc", 0x1000); sysbus_init_mmio(sbd, &s->iomem); - stellaris_adc_reset(s); qdev_init_gpio_in(dev, stellaris_adc_trigger, 1); } @@ -XXX,XX +XXX,XX @@ static const TypeInfo stellaris_i2c_info = { static void stellaris_adc_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + rc->phases.hold = stellaris_adc_reset_hold; dc->vmsd = &vmstate_stellaris_adc; } -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240213155214.13619-3-philmd@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/stellaris.c | 26 ++++++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_sys_instance_init(Object *obj) s->sysclk = qdev_init_clock_out(DEVICE(s), "SYSCLK"); } -/* I2C controller. */ +/* + * I2C controller. + * ??? For now we only implement the master interface. + */ #define TYPE_STELLARIS_I2C "stellaris-i2c" OBJECT_DECLARE_SIMPLE_TYPE(stellaris_i2c_state, STELLARIS_I2C) @@ -XXX,XX +XXX,XX @@ static void stellaris_i2c_write(void *opaque, hwaddr offset, stellaris_i2c_update(s); } -static void stellaris_i2c_reset(stellaris_i2c_state *s) +static void stellaris_i2c_reset_enter(Object *obj, ResetType type) { + stellaris_i2c_state *s = STELLARIS_I2C(obj); + if (s->mcs & STELLARIS_I2C_MCS_BUSBSY) i2c_end_transfer(s->bus); +} + +static void stellaris_i2c_reset_hold(Object *obj) +{ + stellaris_i2c_state *s = STELLARIS_I2C(obj); s->msa = 0; s->mcs = 0; @@ -XXX,XX +XXX,XX @@ static void stellaris_i2c_reset(stellaris_i2c_state *s) s->mimr = 0; s->mris = 0; s->mcr = 0; +} + +static void stellaris_i2c_reset_exit(Object *obj) +{ + stellaris_i2c_state *s = STELLARIS_I2C(obj); + stellaris_i2c_update(s); } @@ -XXX,XX +XXX,XX @@ static void stellaris_i2c_init(Object *obj) memory_region_init_io(&s->iomem, obj, &stellaris_i2c_ops, s, "i2c", 0x1000); sysbus_init_mmio(sbd, &s->iomem); - /* ??? For now we only implement the master interface. */ - stellaris_i2c_reset(s); } /* Analogue to Digital Converter. This is only partially implemented, @@ -XXX,XX +XXX,XX @@ type_init(stellaris_machine_init) static void stellaris_i2c_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + rc->phases.enter = stellaris_i2c_reset_enter; + rc->phases.hold = stellaris_i2c_reset_hold; + rc->phases.exit = stellaris_i2c_reset_exit; dc->vmsd = &vmstate_stellaris_i2c; } -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> QDev objects created with qdev_new() need to manually add their parent relationship with object_property_add_child(). This commit plug the devices which aren't part of the SoC; they will be plugged into a SoC container in the next one. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240213155214.13619-4-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/stellaris.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) &error_fatal); ssddev = qdev_new("ssd0323"); + object_property_add_child(OBJECT(ms), "oled", OBJECT(ssddev)); qdev_prop_set_uint8(ssddev, "cs", 1); qdev_realize_and_unref(ssddev, bus, &error_fatal); gpio_d_splitter = qdev_new(TYPE_SPLIT_IRQ); + object_property_add_child(OBJECT(ms), "splitter", + OBJECT(gpio_d_splitter)); qdev_prop_set_uint32(gpio_d_splitter, "num-lines", 2); qdev_realize_and_unref(gpio_d_splitter, NULL, &error_fatal); qdev_connect_gpio_out( @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) DeviceState *gpad; gpad = qdev_new(TYPE_STELLARIS_GAMEPAD); + object_property_add_child(OBJECT(ms), "gamepad", OBJECT(gpad)); for (i = 0; i < ARRAY_SIZE(gpad_keycode); i++) { qlist_append_int(gpad_keycode_list, gpad_keycode[i]); } -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> QDev objects created with qdev_new() need to manually add their parent relationship with object_property_add_child(). Since we don't model the SoC, just use a QOM container. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240213155214.13619-5-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/stellaris.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) * 400fe000 system control */ + Object *soc_container; DeviceState *gpio_dev[7], *nvic; qemu_irq gpio_in[7][8]; qemu_irq gpio_out[7][8]; @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) flash_size = (((board->dc0 & 0xffff) + 1) << 1) * 1024; sram_size = ((board->dc0 >> 18) + 1) * 1024; + soc_container = object_new("container"); + object_property_add_child(OBJECT(ms), "soc", soc_container); + /* Flash programming is done via the SCU, so pretend it is ROM. */ memory_region_init_rom(flash, NULL, "stellaris.flash", flash_size, &error_fatal); @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) * need its sysclk output. */ ssys_dev = qdev_new(TYPE_STELLARIS_SYS); + object_property_add_child(soc_container, "sys", OBJECT(ssys_dev)); /* * Most devices come preprogrammed with a MAC address in the user data. @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) sysbus_realize_and_unref(SYS_BUS_DEVICE(ssys_dev), &error_fatal); nvic = qdev_new(TYPE_ARMV7M); + object_property_add_child(soc_container, "v7m", OBJECT(nvic)); qdev_prop_set_uint32(nvic, "num-irq", NUM_IRQ_LINES); qdev_prop_set_uint8(nvic, "num-prio-bits", NUM_PRIO_BITS); qdev_prop_set_string(nvic, "cpu-type", ms->cpu_type); @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) dev = qdev_new(TYPE_STELLARIS_GPTM); sbd = SYS_BUS_DEVICE(dev); + object_property_add_child(soc_container, "gptm[*]", OBJECT(dev)); qdev_connect_clock_in(dev, "clk", qdev_get_clock_out(ssys_dev, "SYSCLK")); sysbus_realize_and_unref(sbd, &error_fatal); @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) if (board->dc1 & (1 << 3)) { /* watchdog present */ dev = qdev_new(TYPE_LUMINARY_WATCHDOG); - + object_property_add_child(soc_container, "wdg", OBJECT(dev)); qdev_connect_clock_in(dev, "WDOGCLK", qdev_get_clock_out(ssys_dev, "SYSCLK")); @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) SysBusDevice *sbd; dev = qdev_new("pl011_luminary"); + object_property_add_child(soc_container, "uart[*]", OBJECT(dev)); sbd = SYS_BUS_DEVICE(dev); qdev_prop_set_chr(dev, "chardev", serial_hd(i)); sysbus_realize_and_unref(sbd, &error_fatal); @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) DeviceState *enet; enet = qdev_new("stellaris_enet"); + object_property_add_child(soc_container, "enet", OBJECT(enet)); if (nd) { qdev_set_nic_properties(enet, nd); } else { -- 2.34.1 We support two different encodings for the AArch32 IMPDEF CBAR register -- older cores like the Cortex A9, A7, A15 have this at 4, c15, c0, 0; newer cores like the Cortex A35, A53, A57 and A72 have it at 1 c15 c0 0. When we implemented this we picked which encoding to use based on whether the CPU set ARM_FEATURE_AARCH64. However this isn't right for three cases: * the qemu-system-arm 'max' CPU, which is supposed to be a variant on a Cortex-A57; it ought to use the same encoding the A57 does and which the AArch64 'max' exposes to AArch32 guest code * the Cortex-R52, which is AArch32-only but has the CBAR at the newer encoding (and where we incorrectly are not yet setting ARM_FEATURE_CBAR_RO anyway) * any possible future support for other v8 AArch32 only CPUs, or for supporting "boot the CPU into AArch32 mode" on our existing cores like the A57 etc Make the decision of the encoding be based on whether the CPU implements the ARM_FEATURE_V8 flag instead. This changes the behaviour only for the qemu-system-arm '-cpu max'. We don't expect anybody to be relying on the old behaviour because: * it's not what the real hardware Cortex-A57 does (and that's what our ID register claims we are) * we don't implement the memory-mapped GICv3 support which is the only thing that exists at the peripheral base address pointed to by the register Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240206132931.38376-2-peter.maydell@linaro.org --- target/arm/helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) * AArch64 cores we might need to add a specific feature flag * to indicate cores with "flavour 2" CBAR. */ - if (arm_feature(env, ARM_FEATURE_AARCH64)) { + if (arm_feature(env, ARM_FEATURE_V8)) { /* 32 bit view is [31:18] 0...0 [43:32]. */ uint32_t cbar32 = (extract64(cpu->reset_cbar, 18, 14) << 18) | extract64(cpu->reset_cbar, 32, 12); -- 2.34.1 The Cortex-R52 implements the Configuration Base Address Register (CBAR), as a read-only register. Add ARM_FEATURE_CBAR_RO to this CPU type, so that our implementation provides the register and the associated qdev property. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240206132931.38376-3-peter.maydell@linaro.org --- target/arm/tcg/cpu32.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/arm/tcg/cpu32.c b/target/arm/tcg/cpu32.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu32.c +++ b/target/arm/tcg/cpu32.c @@ -XXX,XX +XXX,XX @@ static void cortex_r52_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_PMSA); set_feature(&cpu->env, ARM_FEATURE_NEON); set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER); + set_feature(&cpu->env, ARM_FEATURE_CBAR_RO); cpu->midr = 0x411fd133; /* r1p3 */ cpu->revidr = 0x00000000; cpu->reset_fpsid = 0x41034023; -- 2.34.1 Add the Cortex-R52 IMPDEF sysregs, by defining them here and also by enabling the AUXCR feature which defines the ACTLR and HACTLR registers. As is our usual practice, we make these simple reads-as-zero stubs for now. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240206132931.38376-4-peter.maydell@linaro.org --- target/arm/tcg/cpu32.c | 108 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 108 insertions(+) diff --git a/target/arm/tcg/cpu32.c b/target/arm/tcg/cpu32.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu32.c +++ b/target/arm/tcg/cpu32.c @@ -XXX,XX +XXX,XX @@ static void cortex_r5_initfn(Object *obj) define_arm_cp_regs(cpu, cortexr5_cp_reginfo); } +static const ARMCPRegInfo cortex_r52_cp_reginfo[] = { + { .name = "CPUACTLR", .cp = 15, .opc1 = 0, .crm = 15, + .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 }, + { .name = "IMP_ATCMREGIONR", + .cp = 15, .opc1 = 0, .crn = 9, .crm = 1, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_BTCMREGIONR", + .cp = 15, .opc1 = 0, .crn = 9, .crm = 1, .opc2 = 1, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_CTCMREGIONR", + .cp = 15, .opc1 = 0, .crn = 9, .crm = 1, .opc2 = 2, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_CSCTLR", + .cp = 15, .opc1 = 1, .crn = 9, .crm = 1, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_BPCTLR", + .cp = 15, .opc1 = 1, .crn = 9, .crm = 1, .opc2 = 1, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_MEMPROTCLR", + .cp = 15, .opc1 = 1, .crn = 9, .crm = 1, .opc2 = 2, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_SLAVEPCTLR", + .cp = 15, .opc1 = 0, .crn = 11, .crm = 0, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_PERIPHREGIONR", + .cp = 15, .opc1 = 0, .crn = 15, .crm = 0, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_FLASHIFREGIONR", + .cp = 15, .opc1 = 0, .crn = 15, .crm = 0, .opc2 = 1, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_BUILDOPTR", + .cp = 15, .opc1 = 0, .crn = 15, .crm = 2, .opc2 = 0, + .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_PINOPTR", + .cp = 15, .opc1 = 0, .crn = 15, .crm = 2, .opc2 = 7, + .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_QOSR", + .cp = 15, .opc1 = 1, .crn = 15, .crm = 3, .opc2 = 1, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_BUSTIMEOUTR", + .cp = 15, .opc1 = 1, .crn = 15, .crm = 3, .opc2 = 2, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_INTMONR", + .cp = 15, .opc1 = 1, .crn = 15, .crm = 3, .opc2 = 4, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_ICERR0", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 0, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_ICERR1", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 0, .opc2 = 1, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_DCERR0", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 1, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_DCERR1", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 1, .opc2 = 1, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_TCMERR0", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 2, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_TCMERR1", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 2, .opc2 = 1, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_TCMSYNDR0", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 2, .opc2 = 2, + .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_TCMSYNDR1", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 2, .opc2 = 3, + .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_FLASHERR0", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 3, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_FLASHERR1", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 3, .opc2 = 1, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_CDBGDR0", + .cp = 15, .opc1 = 3, .crn = 15, .crm = 0, .opc2 = 0, + .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_CBDGBR1", + .cp = 15, .opc1 = 3, .crn = 15, .crm = 0, .opc2 = 1, + .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_TESTR0", + .cp = 15, .opc1 = 4, .crn = 15, .crm = 0, .opc2 = 0, + .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_TESTR1", + .cp = 15, .opc1 = 4, .crn = 15, .crm = 0, .opc2 = 1, + .access = PL1_W, .type = ARM_CP_NOP, .resetvalue = 0 }, + { .name = "IMP_CDBGDCI", + .cp = 15, .opc1 = 0, .crn = 15, .crm = 15, .opc2 = 0, + .access = PL1_W, .type = ARM_CP_NOP, .resetvalue = 0 }, + { .name = "IMP_CDBGDCT", + .cp = 15, .opc1 = 3, .crn = 15, .crm = 2, .opc2 = 0, + .access = PL1_W, .type = ARM_CP_NOP, .resetvalue = 0 }, + { .name = "IMP_CDBGICT", + .cp = 15, .opc1 = 3, .crn = 15, .crm = 2, .opc2 = 1, + .access = PL1_W, .type = ARM_CP_NOP, .resetvalue = 0 }, + { .name = "IMP_CDBGDCD", + .cp = 15, .opc1 = 3, .crn = 15, .crm = 4, .opc2 = 0, + .access = PL1_W, .type = ARM_CP_NOP, .resetvalue = 0 }, + { .name = "IMP_CDBGICD", + .cp = 15, .opc1 = 3, .crn = 15, .crm = 4, .opc2 = 1, + .access = PL1_W, .type = ARM_CP_NOP, .resetvalue = 0 }, +}; + + static void cortex_r52_initfn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); @@ -XXX,XX +XXX,XX @@ static void cortex_r52_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_NEON); set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER); set_feature(&cpu->env, ARM_FEATURE_CBAR_RO); + set_feature(&cpu->env, ARM_FEATURE_AUXCR); cpu->midr = 0x411fd133; /* r1p3 */ cpu->revidr = 0x00000000; cpu->reset_fpsid = 0x41034023; @@ -XXX,XX +XXX,XX @@ static void cortex_r52_initfn(Object *obj) cpu->pmsav7_dregion = 16; cpu->pmsav8r_hdregion = 16; + + define_arm_cp_regs(cpu, cortex_r52_cp_reginfo); } static void cortex_r5f_initfn(Object *obj) -- 2.34.1 Architecturally, the AArch32 MSR/MRS to/from banked register instructions are UNPREDICTABLE for attempts to access a banked register that the guest could access in a more direct way (e.g. using this insn to access r8_fiq when already in FIQ mode). QEMU has chosen to UNDEF on all of these. However, for the case of accessing SPSR_hyp from hyp mode, it turns out that real hardware permits this, with the same effect as if the guest had directly written to SPSR. Further, there is some guest code out there that assumes it can do this, because it happens to work on hardware: an example Cortex-R52 startup code fragment uses this, and it got copied into various other places, including Zephyr. Zephyr was fixed to not use this: https://github.com/zephyrproject-rtos/zephyr/issues/47330 but other examples are still out there, like the selftest binary for the MPS3-AN536. For convenience of being able to run guest code, permit this UNPREDICTABLE access instead of UNDEFing it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240206132931.38376-5-peter.maydell@linaro.org --- target/arm/tcg/op_helper.c | 43 ++++++++++++++++++++++++++------------ target/arm/tcg/translate.c | 19 +++++++++++------ 2 files changed, 43 insertions(+), 19 deletions(-) diff --git a/target/arm/tcg/op_helper.c b/target/arm/tcg/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/op_helper.c +++ b/target/arm/tcg/op_helper.c @@ -XXX,XX +XXX,XX @@ static void msr_mrs_banked_exc_checks(CPUARMState *env, uint32_t tgtmode, */ int curmode = env->uncached_cpsr & CPSR_M; - if (regno == 17) { - /* ELR_Hyp: a special case because access from tgtmode is OK */ - if (curmode != ARM_CPU_MODE_HYP && curmode != ARM_CPU_MODE_MON) { - goto undef; + if (tgtmode == ARM_CPU_MODE_HYP) { + /* + * Handle Hyp target regs first because some are special cases + * which don't want the usual "not accessible from tgtmode" check. + */ + switch (regno) { + case 16 ... 17: /* ELR_Hyp, SPSR_Hyp */ + if (curmode != ARM_CPU_MODE_HYP && curmode != ARM_CPU_MODE_MON) { + goto undef; + } + break; + case 13: + if (curmode != ARM_CPU_MODE_MON) { + goto undef; + } + break; + default: + g_assert_not_reached(); } return; } @@ -XXX,XX +XXX,XX @@ static void msr_mrs_banked_exc_checks(CPUARMState *env, uint32_t tgtmode, } } - if (tgtmode == ARM_CPU_MODE_HYP) { - /* SPSR_Hyp, r13_hyp: accessible from Monitor mode only */ - if (curmode != ARM_CPU_MODE_MON) { - goto undef; - } - } - return; undef: @@ -XXX,XX +XXX,XX @@ void HELPER(msr_banked)(CPUARMState *env, uint32_t value, uint32_t tgtmode, switch (regno) { case 16: /* SPSRs */ - env->banked_spsr[bank_number(tgtmode)] = value; + if (tgtmode == (env->uncached_cpsr & CPSR_M)) { + /* Only happens for SPSR_Hyp access in Hyp mode */ + env->spsr = value; + } else { + env->banked_spsr[bank_number(tgtmode)] = value; + } break; case 17: /* ELR_Hyp */ env->elr_el[2] = value; @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(mrs_banked)(CPUARMState *env, uint32_t tgtmode, uint32_t regno) switch (regno) { case 16: /* SPSRs */ - return env->banked_spsr[bank_number(tgtmode)]; + if (tgtmode == (env->uncached_cpsr & CPSR_M)) { + /* Only happens for SPSR_Hyp access in Hyp mode */ + return env->spsr; + } else { + return env->banked_spsr[bank_number(tgtmode)]; + } case 17: /* ELR_Hyp */ return env->elr_el[2]; case 13: diff --git a/target/arm/tcg/translate.c b/target/arm/tcg/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate.c +++ b/target/arm/tcg/translate.c @@ -XXX,XX +XXX,XX @@ static bool msr_banked_access_decode(DisasContext *s, int r, int sysm, int rn, break; case ARM_CPU_MODE_HYP: /* - * SPSR_hyp and r13_hyp can only be accessed from Monitor mode - * (and so we can forbid accesses from EL2 or below). elr_hyp - * can be accessed also from Hyp mode, so forbid accesses from - * EL0 or EL1. + * r13_hyp can only be accessed from Monitor mode, and so we + * can forbid accesses from EL2 or below. + * elr_hyp can be accessed also from Hyp mode, so forbid + * accesses from EL0 or EL1. + * SPSR_hyp is supposed to be in the same category as r13_hyp + * and UNPREDICTABLE if accessed from anything except Monitor + * mode. However there is some real-world code that will do + * it because at least some hardware happens to permit the + * access. (Notably a standard Cortex-R52 startup code fragment + * does this.) So we permit SPSR_hyp from Hyp mode also, to allow + * this (incorrect) guest code to run. */ - if (!arm_dc_feature(s, ARM_FEATURE_EL2) || s->current_el < 2 || - (s->current_el < 3 && *regno != 17)) { + if (!arm_dc_feature(s, ARM_FEATURE_EL2) || s->current_el < 2 + || (s->current_el < 3 && *regno != 16 && *regno != 17)) { goto undef; } break; -- 2.34.1 We currently guard the CFG3 register read with (scc_partno(s) == 0x524 && scc_partno(s) == 0x547) which is clearly wrong as it is never true. This register is present on all board types except AN524 and AN527; correct the condition. Fixes: 6ac80818941829c0 ("hw/misc/mps2-scc: Implement changes for AN547") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240206132931.38376-6-peter.maydell@linaro.org --- hw/misc/mps2-scc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/misc/mps2-scc.c b/hw/misc/mps2-scc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/mps2-scc.c +++ b/hw/misc/mps2-scc.c @@ -XXX,XX +XXX,XX @@ static uint64_t mps2_scc_read(void *opaque, hwaddr offset, unsigned size) r = s->cfg2; break; case A_CFG3: - if (scc_partno(s) == 0x524 && scc_partno(s) == 0x547) { + if (scc_partno(s) == 0x524 || scc_partno(s) == 0x547) { /* CFG3 reserved on AN524 */ goto bad_offset; } -- 2.34.1 The MPS SCC device has a lot of different flavours for the various different MPS FPGA images, which look mostly similar but have differences in how particular registers are handled. Currently we deal with this with a lot of open-coded checks on scc_partno(), but as we add more board types this is getting a bit hard to read. Factor out the conditions into some functions which we can give more descriptive names to. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240206132931.38376-7-peter.maydell@linaro.org --- hw/misc/mps2-scc.c | 45 +++++++++++++++++++++++++++++++-------------- 1 file changed, 31 insertions(+), 14 deletions(-) diff --git a/hw/misc/mps2-scc.c b/hw/misc/mps2-scc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/mps2-scc.c +++ b/hw/misc/mps2-scc.c @@ -XXX,XX +XXX,XX @@ static int scc_partno(MPS2SCC *s) return extract32(s->id, 4, 8); } +/* Is CFG_REG2 present? */ +static bool have_cfg2(MPS2SCC *s) +{ + return scc_partno(s) == 0x524 || scc_partno(s) == 0x547; +} + +/* Is CFG_REG3 present? */ +static bool have_cfg3(MPS2SCC *s) +{ + return scc_partno(s) != 0x524 && scc_partno(s) != 0x547; +} + +/* Is CFG_REG5 present? */ +static bool have_cfg5(MPS2SCC *s) +{ + return scc_partno(s) == 0x524 || scc_partno(s) == 0x547; +} + +/* Is CFG_REG6 present? */ +static bool have_cfg6(MPS2SCC *s) +{ + return scc_partno(s) == 0x524; +} + /* Handle a write via the SYS_CFG channel to the specified function/device. * Return false on error (reported to guest via SYS_CFGCTRL ERROR bit). */ @@ -XXX,XX +XXX,XX @@ static uint64_t mps2_scc_read(void *opaque, hwaddr offset, unsigned size) r = s->cfg1; break; case A_CFG2: - if (scc_partno(s) != 0x524 && scc_partno(s) != 0x547) { - /* CFG2 reserved on other boards */ + if (!have_cfg2(s)) { goto bad_offset; } r = s->cfg2; break; case A_CFG3: - if (scc_partno(s) == 0x524 || scc_partno(s) == 0x547) { - /* CFG3 reserved on AN524 */ + if (!have_cfg3(s)) { goto bad_offset; } /* These are user-settable DIP switches on the board. We don't @@ -XXX,XX +XXX,XX @@ static uint64_t mps2_scc_read(void *opaque, hwaddr offset, unsigned size) r = s->cfg4; break; case A_CFG5: - if (scc_partno(s) != 0x524 && scc_partno(s) != 0x547) { - /* CFG5 reserved on other boards */ + if (!have_cfg5(s)) { goto bad_offset; } r = s->cfg5; break; case A_CFG6: - if (scc_partno(s) != 0x524) { - /* CFG6 reserved on other boards */ + if (!have_cfg6(s)) { goto bad_offset; } r = s->cfg6; @@ -XXX,XX +XXX,XX @@ static void mps2_scc_write(void *opaque, hwaddr offset, uint64_t value, } break; case A_CFG2: - if (scc_partno(s) != 0x524 && scc_partno(s) != 0x547) { - /* CFG2 reserved on other boards */ + if (!have_cfg2(s)) { goto bad_offset; } /* AN524: QSPI Select signal */ s->cfg2 = value; break; case A_CFG5: - if (scc_partno(s) != 0x524 && scc_partno(s) != 0x547) { - /* CFG5 reserved on other boards */ + if (!have_cfg5(s)) { goto bad_offset; } /* AN524: ACLK frequency in Hz */ s->cfg5 = value; break; case A_CFG6: - if (scc_partno(s) != 0x524) { - /* CFG6 reserved on other boards */ + if (!have_cfg6(s)) { goto bad_offset; } /* AN524: Clock divider for BRAM */ -- 2.34.1 The MPS2 SCC device is broadly the same for all FPGA images, but has minor differences in the behaviour of the CFG registers depending on the image. In many cases we don't really care about the functionality controlled by these registers and a reads-as-written or similar behaviour is sufficient for the moment. For the AN536 the required behaviour is: * A_CFG0 has CPU reset and halt bits - implement as reads-as-written for the moment * A_CFG1 has flash or ATCM address 0 remap handling - QEMU doesn't model this; implement as reads-as-written * A_CFG2 has QSPI select (like AN524) - implemented (no behaviour, as with AN524) * A_CFG3 is MCC_MSB_ADDR "additional MCC addressing bits" - QEMU doesn't care about these, so use the existing RAZ behaviour for convenience * A_CFG4 is board rev (like all other images) - no change needed * A_CFG5 is ACLK frq in hz (like AN524) - implemented as reads-as-written, as for other boards * A_CFG6 is core 0 vector table base address - implemented as reads-as-written for the moment * A_CFG7 is core 1 vector table base address - implemented as reads-as-written for the moment Make the changes necessary for this; leave TODO comments where appropriate to indicate where we might want to come back and implement things like CPU reset. The other aspects of the device specific to this FPGA image (like the values of the board ID and similar registers) will be set via the device's qdev properties. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206132931.38376-8-peter.maydell@linaro.org --- include/hw/misc/mps2-scc.h | 1 + hw/misc/mps2-scc.c | 101 +++++++++++++++++++++++++++++++++---- 2 files changed, 92 insertions(+), 10 deletions(-) diff --git a/include/hw/misc/mps2-scc.h b/include/hw/misc/mps2-scc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/mps2-scc.h +++ b/include/hw/misc/mps2-scc.h @@ -XXX,XX +XXX,XX @@ struct MPS2SCC { uint32_t cfg4; uint32_t cfg5; uint32_t cfg6; + uint32_t cfg7; uint32_t cfgdata_rtn; uint32_t cfgdata_out; uint32_t cfgctrl; diff --git a/hw/misc/mps2-scc.c b/hw/misc/mps2-scc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/mps2-scc.c +++ b/hw/misc/mps2-scc.c @@ -XXX,XX +XXX,XX @@ REG32(CFG3, 0xc) REG32(CFG4, 0x10) REG32(CFG5, 0x14) REG32(CFG6, 0x18) +REG32(CFG7, 0x1c) REG32(CFGDATA_RTN, 0xa0) REG32(CFGDATA_OUT, 0xa4) REG32(CFGCTRL, 0xa8) @@ -XXX,XX +XXX,XX @@ static int scc_partno(MPS2SCC *s) /* Is CFG_REG2 present? */ static bool have_cfg2(MPS2SCC *s) { - return scc_partno(s) == 0x524 || scc_partno(s) == 0x547; + return scc_partno(s) == 0x524 || scc_partno(s) == 0x547 || + scc_partno(s) == 0x536; } /* Is CFG_REG3 present? */ static bool have_cfg3(MPS2SCC *s) { - return scc_partno(s) != 0x524 && scc_partno(s) != 0x547; + return scc_partno(s) != 0x524 && scc_partno(s) != 0x547 && + scc_partno(s) != 0x536; } /* Is CFG_REG5 present? */ static bool have_cfg5(MPS2SCC *s) { - return scc_partno(s) == 0x524 || scc_partno(s) == 0x547; + return scc_partno(s) == 0x524 || scc_partno(s) == 0x547 || + scc_partno(s) == 0x536; } /* Is CFG_REG6 present? */ static bool have_cfg6(MPS2SCC *s) { - return scc_partno(s) == 0x524; + return scc_partno(s) == 0x524 || scc_partno(s) == 0x536; +} + +/* Is CFG_REG7 present? */ +static bool have_cfg7(MPS2SCC *s) +{ + return scc_partno(s) == 0x536; +} + +/* Does CFG_REG0 drive the 'remap' GPIO output? */ +static bool cfg0_is_remap(MPS2SCC *s) +{ + return scc_partno(s) != 0x536; +} + +/* Is CFG_REG1 driving a set of LEDs? */ +static bool cfg1_is_leds(MPS2SCC *s) +{ + return scc_partno(s) != 0x536; } /* Handle a write via the SYS_CFG channel to the specified function/device. @@ -XXX,XX +XXX,XX @@ static uint64_t mps2_scc_read(void *opaque, hwaddr offset, unsigned size) if (!have_cfg3(s)) { goto bad_offset; } - /* These are user-settable DIP switches on the board. We don't + /* + * These are user-settable DIP switches on the board. We don't * model that, so just return zeroes. + * + * TODO: for AN536 this is MCC_MSB_ADDR "additional MCC addressing + * bits". These change which part of the DDR4 the motherboard + * configuration controller can see in its memory map (see the + * appnote section 2.4). QEMU doesn't model the MCC at all, so these + * bits are not interesting to us; read-as-zero is as good as anything + * else. */ r = 0; break; @@ -XXX,XX +XXX,XX @@ static uint64_t mps2_scc_read(void *opaque, hwaddr offset, unsigned size) } r = s->cfg6; break; + case A_CFG7: + if (!have_cfg7(s)) { + goto bad_offset; + } + r = s->cfg7; + break; case A_CFGDATA_RTN: r = s->cfgdata_rtn; break; @@ -XXX,XX +XXX,XX @@ static void mps2_scc_write(void *opaque, hwaddr offset, uint64_t value, * we always reflect bit 0 in the 'remap' GPIO output line, * and let the board wire it up or not as it chooses. * TODO on some boards bit 1 is CPU_WAIT. + * + * TODO: on the AN536 this register controls reset and halt + * for both CPUs. For the moment we don't implement this, so the + * register just reads as written. */ s->cfg0 = value; - qemu_set_irq(s->remap, s->cfg0 & 1); + if (cfg0_is_remap(s)) { + qemu_set_irq(s->remap, s->cfg0 & 1); + } break; case A_CFG1: s->cfg1 = value; - for (size_t i = 0; i < ARRAY_SIZE(s->led); i++) { - led_set_state(s->led[i], extract32(value, i, 1)); + /* + * On most boards this register drives LEDs. + * + * TODO: for AN536 this controls whether flash and ATCM are + * enabled or disabled on reset. QEMU doesn't model this, and + * always wires up RAM in the ATCM area and ROM in the flash area. + */ + if (cfg1_is_leds(s)) { + for (size_t i = 0; i < ARRAY_SIZE(s->led); i++) { + led_set_state(s->led[i], extract32(value, i, 1)); + } } break; case A_CFG2: if (!have_cfg2(s)) { goto bad_offset; } - /* AN524: QSPI Select signal */ + /* AN524, AN536: QSPI Select signal */ s->cfg2 = value; break; case A_CFG5: if (!have_cfg5(s)) { goto bad_offset; } - /* AN524: ACLK frequency in Hz */ + /* AN524, AN536: ACLK frequency in Hz */ s->cfg5 = value; break; case A_CFG6: @@ -XXX,XX +XXX,XX @@ static void mps2_scc_write(void *opaque, hwaddr offset, uint64_t value, goto bad_offset; } /* AN524: Clock divider for BRAM */ + /* AN536: Core 0 vector table base address */ + s->cfg6 = value; + break; + case A_CFG7: + if (!have_cfg7(s)) { + goto bad_offset; + } + /* AN536: Core 1 vector table base address */ s->cfg6 = value; break; case A_CFGDATA_OUT: @@ -XXX,XX +XXX,XX @@ static void mps2_scc_finalize(Object *obj) g_free(s->oscclk_reset); } +static bool cfg7_needed(void *opaque) +{ + MPS2SCC *s = opaque; + + return have_cfg7(s); +} + +static const VMStateDescription vmstate_cfg7 = { + .name = "mps2-scc/cfg7", + .version_id = 1, + .minimum_version_id = 1, + .needed = cfg7_needed, + .fields = (const VMStateField[]) { + VMSTATE_UINT32(cfg7, MPS2SCC), + VMSTATE_END_OF_LIST() + } +}; + static const VMStateDescription mps2_scc_vmstate = { .name = "mps2-scc", .version_id = 3, @@ -XXX,XX +XXX,XX @@ static const VMStateDescription mps2_scc_vmstate = { VMSTATE_VARRAY_UINT32(oscclk, MPS2SCC, num_oscclk, 0, vmstate_info_uint32, uint32_t), VMSTATE_END_OF_LIST() + }, + .subsections = (const VMStateDescription * const []) { + &vmstate_cfg7, + NULL } }; -- 2.34.1 The AN536 is another FPGA image for the MPS3 development board. Unlike the existing FPGA images we already model, this board uses a Cortex-R family CPU, and it does not use any equivalent to the M-profile "Subsystem for Embedded" SoC-equivalent that we model in hw/arm/armsse.c. It's therefore more convenient for us to model it as a completely separate C file. This commit adds the basic skeleton of the board model, and the code to create all the RAM and ROM. We assume that we're probably going to want to add more images in future, so use the same base class/subclass setup that mps2-tz.c uses, even though at the moment there's only a single subclass. Following commits will add the CPUs and the peripherals. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206132931.38376-9-peter.maydell@linaro.org --- MAINTAINERS | 3 +- configs/devices/arm-softmmu/default.mak | 1 + hw/arm/mps3r.c | 239 ++++++++++++++++++++++++ hw/arm/Kconfig | 5 + hw/arm/meson.build | 1 + 5 files changed, 248 insertions(+), 1 deletion(-) create mode 100644 hw/arm/mps3r.c diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/misc/imx7_*.h F: hw/pci-host/designware.c F: include/hw/pci-host/designware.h -MPS2 +MPS2 / MPS3 M: Peter Maydell <peter.maydell@linaro.org> L: qemu-arm@nongnu.org S: Maintained F: hw/arm/mps2.c F: hw/arm/mps2-tz.c +F: hw/arm/mps3r.c F: hw/misc/mps2-*.c F: include/hw/misc/mps2-*.h F: hw/arm/armsse.c diff --git a/configs/devices/arm-softmmu/default.mak b/configs/devices/arm-softmmu/default.mak index XXXXXXX..XXXXXXX 100644 --- a/configs/devices/arm-softmmu/default.mak +++ b/configs/devices/arm-softmmu/default.mak @@ -XXX,XX +XXX,XX @@ CONFIG_ARM_VIRT=y # CONFIG_INTEGRATOR=n # CONFIG_FSL_IMX31=n # CONFIG_MUSICPAL=n +# CONFIG_MPS3R=n # CONFIG_MUSCA=n # CONFIG_CHEETAH=n # CONFIG_SX1=n diff --git a/hw/arm/mps3r.c b/hw/arm/mps3r.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/mps3r.c @@ -XXX,XX +XXX,XX @@ +/* + * Arm MPS3 board emulation for Cortex-R-based FPGA images. + * (For M-profile images see mps2.c and mps2tz.c.) + * + * Copyright (c) 2017 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +/* + * The MPS3 is an FPGA based dev board. This file handles FPGA images + * which use the Cortex-R CPUs. We model these separately from the + * M-profile images, because on M-profile the FPGA image is based on + * a "Subsystem for Embedded" which is similar to an SoC, whereas + * the R-profile FPGA images don't have that abstraction layer. + * + * We model the following FPGA images here: + * "mps3-an536" -- dual Cortex-R52 as documented in Arm Application Note AN536 + * + * Application Note AN536: + * https://developer.arm.com/documentation/dai0536/latest/ + */ + +#include "qemu/osdep.h" +#include "qemu/units.h" +#include "qapi/error.h" +#include "exec/address-spaces.h" +#include "cpu.h" +#include "hw/boards.h" +#include "hw/arm/boot.h" + +/* Define the layout of RAM and ROM in a board */ +typedef struct RAMInfo { + const char *name; + hwaddr base; + hwaddr size; + int mrindex; /* index into rams[]; -1 for the system RAM block */ + int flags; +} RAMInfo; + +/* + * The MPS3 DDR is 3GiB, but on a 32-bit host QEMU doesn't permit + * emulation of that much guest RAM, so artificially make it smaller. + */ +#if HOST_LONG_BITS == 32 +#define MPS3_DDR_SIZE (1 * GiB) +#else +#define MPS3_DDR_SIZE (3 * GiB) +#endif + +/* + * Flag values: + * IS_MAIN: this is the main machine RAM + * IS_ROM: this area is read-only + */ +#define IS_MAIN 1 +#define IS_ROM 2 + +#define MPS3R_RAM_MAX 9 + +typedef enum MPS3RFPGAType { + FPGA_AN536, +} MPS3RFPGAType; + +struct MPS3RMachineClass { + MachineClass parent; + MPS3RFPGAType fpga_type; + const RAMInfo *raminfo; +}; + +struct MPS3RMachineState { + MachineState parent; + MemoryRegion ram[MPS3R_RAM_MAX]; +}; + +#define TYPE_MPS3R_MACHINE "mps3r" +#define TYPE_MPS3R_AN536_MACHINE MACHINE_TYPE_NAME("mps3-an536") + +OBJECT_DECLARE_TYPE(MPS3RMachineState, MPS3RMachineClass, MPS3R_MACHINE) + +static const RAMInfo an536_raminfo[] = { + { + .name = "ATCM", + .base = 0x00000000, + .size = 0x00008000, + .mrindex = 0, + }, { + /* We model the QSPI flash as simple ROM for now */ + .name = "QSPI", + .base = 0x08000000, + .size = 0x00800000, + .flags = IS_ROM, + .mrindex = 1, + }, { + .name = "BRAM", + .base = 0x10000000, + .size = 0x00080000, + .mrindex = 2, + }, { + .name = "DDR", + .base = 0x20000000, + .size = MPS3_DDR_SIZE, + .mrindex = -1, + }, { + .name = "ATCM0", + .base = 0xee000000, + .size = 0x00008000, + .mrindex = 3, + }, { + .name = "BTCM0", + .base = 0xee100000, + .size = 0x00008000, + .mrindex = 4, + }, { + .name = "CTCM0", + .base = 0xee200000, + .size = 0x00008000, + .mrindex = 5, + }, { + .name = "ATCM1", + .base = 0xee400000, + .size = 0x00008000, + .mrindex = 6, + }, { + .name = "BTCM1", + .base = 0xee500000, + .size = 0x00008000, + .mrindex = 7, + }, { + .name = "CTCM1", + .base = 0xee600000, + .size = 0x00008000, + .mrindex = 8, + }, { + .name = NULL, + } +}; + +static MemoryRegion *mr_for_raminfo(MPS3RMachineState *mms, + const RAMInfo *raminfo) +{ + /* Return an initialized MemoryRegion for the RAMInfo. */ + MemoryRegion *ram; + + if (raminfo->mrindex < 0) { + /* Means this RAMInfo is for QEMU's "system memory" */ + MachineState *machine = MACHINE(mms); + assert(!(raminfo->flags & IS_ROM)); + return machine->ram; + } + + assert(raminfo->mrindex < MPS3R_RAM_MAX); + ram = &mms->ram[raminfo->mrindex]; + + memory_region_init_ram(ram, NULL, raminfo->name, + raminfo->size, &error_fatal); + if (raminfo->flags & IS_ROM) { + memory_region_set_readonly(ram, true); + } + return ram; +} + +static void mps3r_common_init(MachineState *machine) +{ + MPS3RMachineState *mms = MPS3R_MACHINE(machine); + MPS3RMachineClass *mmc = MPS3R_MACHINE_GET_CLASS(mms); + MemoryRegion *sysmem = get_system_memory(); + + for (const RAMInfo *ri = mmc->raminfo; ri->name; ri++) { + MemoryRegion *mr = mr_for_raminfo(mms, ri); + memory_region_add_subregion(sysmem, ri->base, mr); + } +} + +static void mps3r_set_default_ram_info(MPS3RMachineClass *mmc) +{ + /* + * Set mc->default_ram_size and default_ram_id from the + * information in mmc->raminfo. + */ + MachineClass *mc = MACHINE_CLASS(mmc); + const RAMInfo *p; + + for (p = mmc->raminfo; p->name; p++) { + if (p->mrindex < 0) { + /* Found the entry for "system memory" */ + mc->default_ram_size = p->size; + mc->default_ram_id = p->name; + return; + } + } + g_assert_not_reached(); +} + +static void mps3r_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + + mc->init = mps3r_common_init; +} + +static void mps3r_an536_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + MPS3RMachineClass *mmc = MPS3R_MACHINE_CLASS(oc); + static const char * const valid_cpu_types[] = { + ARM_CPU_TYPE_NAME("cortex-r52"), + NULL + }; + + mc->desc = "ARM MPS3 with AN536 FPGA image for Cortex-R52"; + mc->default_cpus = 2; + mc->min_cpus = mc->default_cpus; + mc->max_cpus = mc->default_cpus; + mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-r52"); + mc->valid_cpu_types = valid_cpu_types; + mmc->raminfo = an536_raminfo; + mps3r_set_default_ram_info(mmc); +} + +static const TypeInfo mps3r_machine_types[] = { + { + .name = TYPE_MPS3R_MACHINE, + .parent = TYPE_MACHINE, + .abstract = true, + .instance_size = sizeof(MPS3RMachineState), + .class_size = sizeof(MPS3RMachineClass), + .class_init = mps3r_class_init, + }, { + .name = TYPE_MPS3R_AN536_MACHINE, + .parent = TYPE_MPS3R_MACHINE, + .class_init = mps3r_an536_class_init, + }, +}; + +DEFINE_TYPES(mps3r_machine_types); diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config MAINSTONE select PFLASH_CFI01 select SMC91C111 +config MPS3R + bool + default y + depends on TCG && ARM + config MUSCA bool default y diff --git a/hw/arm/meson.build b/hw/arm/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/meson.build +++ b/hw/arm/meson.build @@ -XXX,XX +XXX,XX @@ arm_ss.add(when: 'CONFIG_HIGHBANK', if_true: files('highbank.c')) arm_ss.add(when: 'CONFIG_INTEGRATOR', if_true: files('integratorcp.c')) arm_ss.add(when: 'CONFIG_MAINSTONE', if_true: files('mainstone.c')) arm_ss.add(when: 'CONFIG_MICROBIT', if_true: files('microbit.c')) +arm_ss.add(when: 'CONFIG_MPS3R', if_true: files('mps3r.c')) arm_ss.add(when: 'CONFIG_MUSICPAL', if_true: files('musicpal.c')) arm_ss.add(when: 'CONFIG_NETDUINOPLUS2', if_true: files('netduinoplus2.c')) arm_ss.add(when: 'CONFIG_OLIMEX_STM32_H405', if_true: files('olimex-stm32-h405.c')) -- 2.34.1 Create the CPUs, the GIC, and the per-CPU RAM block for the mps3-an536 board. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240206132931.38376-10-peter.maydell@linaro.org --- hw/arm/mps3r.c | 180 ++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 177 insertions(+), 3 deletions(-) diff --git a/hw/arm/mps3r.c b/hw/arm/mps3r.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps3r.c +++ b/hw/arm/mps3r.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qemu/units.h" #include "qapi/error.h" +#include "qapi/qmp/qlist.h" #include "exec/address-spaces.h" #include "cpu.h" #include "hw/boards.h" +#include "hw/qdev-properties.h" #include "hw/arm/boot.h" +#include "hw/arm/bsa.h" +#include "hw/intc/arm_gicv3.h" /* Define the layout of RAM and ROM in a board */ typedef struct RAMInfo { @@ -XXX,XX +XXX,XX @@ typedef struct RAMInfo { #define IS_ROM 2 #define MPS3R_RAM_MAX 9 +#define MPS3R_CPU_MAX 2 + +#define PERIPHBASE 0xf0000000 +#define NUM_SPIS 96 typedef enum MPS3RFPGAType { FPGA_AN536, @@ -XXX,XX +XXX,XX @@ struct MPS3RMachineClass { MachineClass parent; MPS3RFPGAType fpga_type; const RAMInfo *raminfo; + hwaddr loader_start; }; struct MPS3RMachineState { MachineState parent; + struct arm_boot_info bootinfo; MemoryRegion ram[MPS3R_RAM_MAX]; + Object *cpu[MPS3R_CPU_MAX]; + MemoryRegion cpu_sysmem[MPS3R_CPU_MAX]; + MemoryRegion sysmem_alias[MPS3R_CPU_MAX]; + MemoryRegion cpu_ram[MPS3R_CPU_MAX]; + GICv3State gic; }; #define TYPE_MPS3R_MACHINE "mps3r" @@ -XXX,XX +XXX,XX @@ static MemoryRegion *mr_for_raminfo(MPS3RMachineState *mms, return ram; } +/* + * There is no defined secondary boot protocol for Linux for the AN536, + * because real hardware has a restriction that atomic operations between + * the two CPUs do not function correctly, and so true SMP is not + * possible. Therefore for cases where the user is directly booting + * a kernel, we treat the system as essentially uniprocessor, and + * put the secondary CPU into power-off state (as if the user on the + * real hardware had configured the secondary to be halted via the + * SCC config registers). + * + * Note that the default secondary boot code would not work here anyway + * as it assumes a GICv2, and we have a GICv3. + */ +static void mps3r_write_secondary_boot(ARMCPU *cpu, + const struct arm_boot_info *info) +{ + /* + * Power the secondary CPU off. This means we don't need to write any + * boot code into guest memory. Note that the 'cpu' argument to this + * function is the primary CPU we passed to arm_load_kernel(), not + * the secondary. Loop around all the other CPUs, as the boot.c + * code does for the "disable secondaries if PSCI is enabled" case. + */ + for (CPUState *cs = first_cpu; cs; cs = CPU_NEXT(cs)) { + if (cs != first_cpu) { + object_property_set_bool(OBJECT(cs), "start-powered-off", true, + &error_abort); + } + } +} + +static void mps3r_secondary_cpu_reset(ARMCPU *cpu, + const struct arm_boot_info *info) +{ + /* We don't need to do anything here because the CPU will be off */ +} + +static void create_gic(MPS3RMachineState *mms, MemoryRegion *sysmem) +{ + MachineState *machine = MACHINE(mms); + DeviceState *gicdev; + QList *redist_region_count; + + object_initialize_child(OBJECT(mms), "gic", &mms->gic, TYPE_ARM_GICV3); + gicdev = DEVICE(&mms->gic); + qdev_prop_set_uint32(gicdev, "num-cpu", machine->smp.cpus); + qdev_prop_set_uint32(gicdev, "num-irq", NUM_SPIS + GIC_INTERNAL); + redist_region_count = qlist_new(); + qlist_append_int(redist_region_count, machine->smp.cpus); + qdev_prop_set_array(gicdev, "redist-region-count", redist_region_count); + object_property_set_link(OBJECT(&mms->gic), "sysmem", + OBJECT(sysmem), &error_fatal); + sysbus_realize(SYS_BUS_DEVICE(&mms->gic), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->gic), 0, PERIPHBASE); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->gic), 1, PERIPHBASE + 0x100000); + /* + * Wire the outputs from each CPU's generic timer and the GICv3 + * maintenance interrupt signal to the appropriate GIC PPI inputs, + * and the GIC's IRQ/FIQ/VIRQ/VFIQ interrupt outputs to the CPU's inputs. + */ + for (int i = 0; i < machine->smp.cpus; i++) { + DeviceState *cpudev = DEVICE(mms->cpu[i]); + SysBusDevice *gicsbd = SYS_BUS_DEVICE(&mms->gic); + int intidbase = NUM_SPIS + i * GIC_INTERNAL; + int irq; + /* + * Mapping from the output timer irq lines from the CPU to the + * GIC PPI inputs used for this board. This isn't a BSA board, + * but it uses the standard convention for the PPI numbers. + */ + const int timer_irq[] = { + [GTIMER_PHYS] = ARCH_TIMER_NS_EL1_IRQ, + [GTIMER_VIRT] = ARCH_TIMER_VIRT_IRQ, + [GTIMER_HYP] = ARCH_TIMER_NS_EL2_IRQ, + }; + + for (irq = 0; irq < ARRAY_SIZE(timer_irq); irq++) { + qdev_connect_gpio_out(cpudev, irq, + qdev_get_gpio_in(gicdev, + intidbase + timer_irq[irq])); + } + + qdev_connect_gpio_out_named(cpudev, "gicv3-maintenance-interrupt", 0, + qdev_get_gpio_in(gicdev, + intidbase + ARCH_GIC_MAINT_IRQ)); + + qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0, + qdev_get_gpio_in(gicdev, + intidbase + VIRTUAL_PMU_IRQ)); + + sysbus_connect_irq(gicsbd, i, + qdev_get_gpio_in(cpudev, ARM_CPU_IRQ)); + sysbus_connect_irq(gicsbd, i + machine->smp.cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_FIQ)); + sysbus_connect_irq(gicsbd, i + 2 * machine->smp.cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_VIRQ)); + sysbus_connect_irq(gicsbd, i + 3 * machine->smp.cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ)); + } +} + static void mps3r_common_init(MachineState *machine) { MPS3RMachineState *mms = MPS3R_MACHINE(machine); @@ -XXX,XX +XXX,XX @@ static void mps3r_common_init(MachineState *machine) MemoryRegion *mr = mr_for_raminfo(mms, ri); memory_region_add_subregion(sysmem, ri->base, mr); } + + assert(machine->smp.cpus <= MPS3R_CPU_MAX); + for (int i = 0; i < machine->smp.cpus; i++) { + g_autofree char *sysmem_name = g_strdup_printf("cpu-%d-memory", i); + g_autofree char *ramname = g_strdup_printf("cpu-%d-memory", i); + g_autofree char *alias_name = g_strdup_printf("sysmem-alias-%d", i); + + /* + * Each CPU has some private RAM/peripherals, so create the container + * which will house those, with the whole-machine system memory being + * used where there's no CPU-specific device. Note that we need the + * sysmem_alias aliases because we can't put one MR (the original + * 'sysmem') into more than one other MR. + */ + memory_region_init(&mms->cpu_sysmem[i], OBJECT(machine), + sysmem_name, UINT64_MAX); + memory_region_init_alias(&mms->sysmem_alias[i], OBJECT(machine), + alias_name, sysmem, 0, UINT64_MAX); + memory_region_add_subregion_overlap(&mms->cpu_sysmem[i], 0, + &mms->sysmem_alias[i], -1); + + mms->cpu[i] = object_new(machine->cpu_type); + object_property_set_link(mms->cpu[i], "memory", + OBJECT(&mms->cpu_sysmem[i]), &error_abort); + object_property_set_int(mms->cpu[i], "reset-cbar", + PERIPHBASE, &error_abort); + qdev_realize(DEVICE(mms->cpu[i]), NULL, &error_fatal); + object_unref(mms->cpu[i]); + + /* Per-CPU RAM */ + memory_region_init_ram(&mms->cpu_ram[i], NULL, ramname, + 0x1000, &error_fatal); + memory_region_add_subregion(&mms->cpu_sysmem[i], 0xe7c01000, + &mms->cpu_ram[i]); + } + + create_gic(mms, sysmem); + + mms->bootinfo.ram_size = machine->ram_size; + mms->bootinfo.board_id = -1; + mms->bootinfo.loader_start = mmc->loader_start; + mms->bootinfo.write_secondary_boot = mps3r_write_secondary_boot; + mms->bootinfo.secondary_cpu_reset_hook = mps3r_secondary_cpu_reset; + arm_load_kernel(ARM_CPU(mms->cpu[0]), machine, &mms->bootinfo); } static void mps3r_set_default_ram_info(MPS3RMachineClass *mmc) @@ -XXX,XX +XXX,XX @@ static void mps3r_set_default_ram_info(MPS3RMachineClass *mmc) /* Found the entry for "system memory" */ mc->default_ram_size = p->size; mc->default_ram_id = p->name; + mmc->loader_start = p->base; return; } } @@ -XXX,XX +XXX,XX @@ static void mps3r_an536_class_init(ObjectClass *oc, void *data) }; mc->desc = "ARM MPS3 with AN536 FPGA image for Cortex-R52"; - mc->default_cpus = 2; - mc->min_cpus = mc->default_cpus; - mc->max_cpus = mc->default_cpus; + /* + * In the real FPGA image there are always two cores, but the standard + * initial setting for the SCC SYSCON 0x000 register is 0x21, meaning + * that the second core is held in reset and halted. Many images built for + * the board do not expect the second core to run at startup (especially + * since on the real FPGA image it is not possible to use LDREX/STREX + * in RAM between the two cores, so a true SMP setup isn't supported). + * + * As QEMU's equivalent of this, we support both -smp 1 and -smp 2, + * with the default being -smp 1. This seems a more intuitive UI for + * QEMU users than, for instance, having a machine property to allow + * the user to set the initial value of the SYSCON 0x000 register. + */ + mc->default_cpus = 1; + mc->min_cpus = 1; + mc->max_cpus = 2; mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-r52"); mc->valid_cpu_types = valid_cpu_types; mmc->raminfo = an536_raminfo; -- 2.34.1 This board has a lot of UARTs: there is one UART per CPU in the per-CPU peripheral part of the address map, whose interrupts are connected as per-CPU interrupt lines. Then there are 4 UARTs in the normal part of the peripheral space, whose interrupts are shared peripheral interrupts. Connect and wire them all up; this involves some OR gates where multiple overflow interrupts are wired into one GIC input. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206132931.38376-11-peter.maydell@linaro.org --- hw/arm/mps3r.c | 94 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 94 insertions(+) diff --git a/hw/arm/mps3r.c b/hw/arm/mps3r.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps3r.c +++ b/hw/arm/mps3r.c @@ -XXX,XX +XXX,XX @@ #include "qapi/qmp/qlist.h" #include "exec/address-spaces.h" #include "cpu.h" +#include "sysemu/sysemu.h" #include "hw/boards.h" +#include "hw/or-irq.h" #include "hw/qdev-properties.h" #include "hw/arm/boot.h" #include "hw/arm/bsa.h" +#include "hw/char/cmsdk-apb-uart.h" #include "hw/intc/arm_gicv3.h" /* Define the layout of RAM and ROM in a board */ @@ -XXX,XX +XXX,XX @@ typedef struct RAMInfo { #define MPS3R_RAM_MAX 9 #define MPS3R_CPU_MAX 2 +#define MPS3R_UART_MAX 4 /* shared UART count */ #define PERIPHBASE 0xf0000000 #define NUM_SPIS 96 @@ -XXX,XX +XXX,XX @@ struct MPS3RMachineState { MemoryRegion sysmem_alias[MPS3R_CPU_MAX]; MemoryRegion cpu_ram[MPS3R_CPU_MAX]; GICv3State gic; + /* per-CPU UARTs followed by the shared UARTs */ + CMSDKAPBUART uart[MPS3R_CPU_MAX + MPS3R_UART_MAX]; + OrIRQState cpu_uart_oflow[MPS3R_CPU_MAX]; + OrIRQState uart_oflow; }; #define TYPE_MPS3R_MACHINE "mps3r" @@ -XXX,XX +XXX,XX @@ struct MPS3RMachineState { OBJECT_DECLARE_TYPE(MPS3RMachineState, MPS3RMachineClass, MPS3R_MACHINE) +/* + * Main clock frequency CLK in Hz (50MHz). In the image there are also + * ACLK, MCLK, GPUCLK and PERIPHCLK at the same frequency; for our + * model we just roll them all into one. + */ +#define CLK_FRQ 50000000 + static const RAMInfo an536_raminfo[] = { { .name = "ATCM", @@ -XXX,XX +XXX,XX @@ static void create_gic(MPS3RMachineState *mms, MemoryRegion *sysmem) } } +/* + * Create UART uartno, and map it into the MemoryRegion mem at address baseaddr. + * The qemu_irq arguments are where we connect the various IRQs from the UART. + */ +static void create_uart(MPS3RMachineState *mms, int uartno, MemoryRegion *mem, + hwaddr baseaddr, qemu_irq txirq, qemu_irq rxirq, + qemu_irq txoverirq, qemu_irq rxoverirq, + qemu_irq combirq) +{ + g_autofree char *s = g_strdup_printf("uart%d", uartno); + SysBusDevice *sbd; + + assert(uartno < ARRAY_SIZE(mms->uart)); + object_initialize_child(OBJECT(mms), s, &mms->uart[uartno], + TYPE_CMSDK_APB_UART); + qdev_prop_set_uint32(DEVICE(&mms->uart[uartno]), "pclk-frq", CLK_FRQ); + qdev_prop_set_chr(DEVICE(&mms->uart[uartno]), "chardev", serial_hd(uartno)); + sbd = SYS_BUS_DEVICE(&mms->uart[uartno]); + sysbus_realize(sbd, &error_fatal); + memory_region_add_subregion(mem, baseaddr, + sysbus_mmio_get_region(sbd, 0)); + sysbus_connect_irq(sbd, 0, txirq); + sysbus_connect_irq(sbd, 1, rxirq); + sysbus_connect_irq(sbd, 2, txoverirq); + sysbus_connect_irq(sbd, 3, rxoverirq); + sysbus_connect_irq(sbd, 4, combirq); +} + static void mps3r_common_init(MachineState *machine) { MPS3RMachineState *mms = MPS3R_MACHINE(machine); MPS3RMachineClass *mmc = MPS3R_MACHINE_GET_CLASS(mms); MemoryRegion *sysmem = get_system_memory(); + DeviceState *gicdev; for (const RAMInfo *ri = mmc->raminfo; ri->name; ri++) { MemoryRegion *mr = mr_for_raminfo(mms, ri); @@ -XXX,XX +XXX,XX @@ static void mps3r_common_init(MachineState *machine) } create_gic(mms, sysmem); + gicdev = DEVICE(&mms->gic); + + /* + * UARTs 0 and 1 are per-CPU; their interrupts are wired to + * the relevant CPU's PPI 0..3, aka INTID 16..19 + */ + for (int i = 0; i < machine->smp.cpus; i++) { + int intidbase = NUM_SPIS + i * GIC_INTERNAL; + g_autofree char *s = g_strdup_printf("cpu-uart-oflow-orgate%d", i); + DeviceState *orgate; + + /* The two overflow IRQs from the UART are ORed together into PPI 3 */ + object_initialize_child(OBJECT(mms), s, &mms->cpu_uart_oflow[i], + TYPE_OR_IRQ); + orgate = DEVICE(&mms->cpu_uart_oflow[i]); + qdev_prop_set_uint32(orgate, "num-lines", 2); + qdev_realize(orgate, NULL, &error_fatal); + qdev_connect_gpio_out(orgate, 0, + qdev_get_gpio_in(gicdev, intidbase + 19)); + + create_uart(mms, i, &mms->cpu_sysmem[i], 0xe7c00000, + qdev_get_gpio_in(gicdev, intidbase + 17), /* tx */ + qdev_get_gpio_in(gicdev, intidbase + 16), /* rx */ + qdev_get_gpio_in(orgate, 0), /* txover */ + qdev_get_gpio_in(orgate, 1), /* rxover */ + qdev_get_gpio_in(gicdev, intidbase + 18) /* combined */); + } + /* + * UARTs 2 to 5 are whole-system; all overflow IRQs are ORed + * together into IRQ 17 + */ + object_initialize_child(OBJECT(mms), "uart-oflow-orgate", + &mms->uart_oflow, TYPE_OR_IRQ); + qdev_prop_set_uint32(DEVICE(&mms->uart_oflow), "num-lines", + MPS3R_UART_MAX * 2); + qdev_realize(DEVICE(&mms->uart_oflow), NULL, &error_fatal); + qdev_connect_gpio_out(DEVICE(&mms->uart_oflow), 0, + qdev_get_gpio_in(gicdev, 17)); + + for (int i = 0; i < MPS3R_UART_MAX; i++) { + hwaddr baseaddr = 0xe0205000 + i * 0x1000; + int rxirq = 5 + i * 2, txirq = 6 + i * 2, combirq = 13 + i; + + create_uart(mms, i + MPS3R_CPU_MAX, sysmem, baseaddr, + qdev_get_gpio_in(gicdev, txirq), + qdev_get_gpio_in(gicdev, rxirq), + qdev_get_gpio_in(DEVICE(&mms->uart_oflow), i * 2), + qdev_get_gpio_in(DEVICE(&mms->uart_oflow), i * 2 + 1), + qdev_get_gpio_in(gicdev, combirq)); + } mms->bootinfo.ram_size = machine->ram_size; mms->bootinfo.board_id = -1; -- 2.34.1 Add the GPIO, watchdog, dual-timer and I2C devices to the mps3-an536 board. These are all simple devices that just need to be created and wired up. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206132931.38376-12-peter.maydell@linaro.org --- hw/arm/mps3r.c | 59 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 59 insertions(+) diff --git a/hw/arm/mps3r.c b/hw/arm/mps3r.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps3r.c +++ b/hw/arm/mps3r.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/sysemu.h" #include "hw/boards.h" #include "hw/or-irq.h" +#include "hw/qdev-clock.h" #include "hw/qdev-properties.h" #include "hw/arm/boot.h" #include "hw/arm/bsa.h" #include "hw/char/cmsdk-apb-uart.h" +#include "hw/i2c/arm_sbcon_i2c.h" #include "hw/intc/arm_gicv3.h" +#include "hw/misc/unimp.h" +#include "hw/timer/cmsdk-apb-dualtimer.h" +#include "hw/watchdog/cmsdk-apb-watchdog.h" /* Define the layout of RAM and ROM in a board */ typedef struct RAMInfo { @@ -XXX,XX +XXX,XX @@ struct MPS3RMachineState { CMSDKAPBUART uart[MPS3R_CPU_MAX + MPS3R_UART_MAX]; OrIRQState cpu_uart_oflow[MPS3R_CPU_MAX]; OrIRQState uart_oflow; + CMSDKAPBWatchdog watchdog; + CMSDKAPBDualTimer dualtimer; + ArmSbconI2CState i2c[5]; + Clock *clk; }; #define TYPE_MPS3R_MACHINE "mps3r" @@ -XXX,XX +XXX,XX @@ static void mps3r_common_init(MachineState *machine) MemoryRegion *sysmem = get_system_memory(); DeviceState *gicdev; + mms->clk = clock_new(OBJECT(machine), "CLK"); + clock_set_hz(mms->clk, CLK_FRQ); + for (const RAMInfo *ri = mmc->raminfo; ri->name; ri++) { MemoryRegion *mr = mr_for_raminfo(mms, ri); memory_region_add_subregion(sysmem, ri->base, mr); @@ -XXX,XX +XXX,XX @@ static void mps3r_common_init(MachineState *machine) qdev_get_gpio_in(gicdev, combirq)); } + for (int i = 0; i < 4; i++) { + /* CMSDK GPIO controllers */ + g_autofree char *s = g_strdup_printf("gpio%d", i); + create_unimplemented_device(s, 0xe0000000 + i * 0x1000, 0x1000); + } + + object_initialize_child(OBJECT(mms), "watchdog", &mms->watchdog, + TYPE_CMSDK_APB_WATCHDOG); + qdev_connect_clock_in(DEVICE(&mms->watchdog), "WDOGCLK", mms->clk); + sysbus_realize(SYS_BUS_DEVICE(&mms->watchdog), &error_fatal); + sysbus_connect_irq(SYS_BUS_DEVICE(&mms->watchdog), 0, + qdev_get_gpio_in(gicdev, 0)); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->watchdog), 0, 0xe0100000); + + object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer, + TYPE_CMSDK_APB_DUALTIMER); + qdev_connect_clock_in(DEVICE(&mms->dualtimer), "TIMCLK", mms->clk); + sysbus_realize(SYS_BUS_DEVICE(&mms->dualtimer), &error_fatal); + sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 0, + qdev_get_gpio_in(gicdev, 3)); + sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 1, + qdev_get_gpio_in(gicdev, 1)); + sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 2, + qdev_get_gpio_in(gicdev, 2)); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->dualtimer), 0, 0xe0101000); + + for (int i = 0; i < ARRAY_SIZE(mms->i2c); i++) { + static const hwaddr i2cbase[] = {0xe0102000, /* Touch */ + 0xe0103000, /* Audio */ + 0xe0107000, /* Shield0 */ + 0xe0108000, /* Shield1 */ + 0xe0109000}; /* DDR4 EEPROM */ + g_autofree char *s = g_strdup_printf("i2c%d", i); + + object_initialize_child(OBJECT(mms), s, &mms->i2c[i], + TYPE_ARM_SBCON_I2C); + sysbus_realize(SYS_BUS_DEVICE(&mms->i2c[i]), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->i2c[i]), 0, i2cbase[i]); + if (i != 2 && i != 3) { + /* + * internal-only bus: mark it full to avoid user-created + * i2c devices being plugged into it. + */ + qbus_mark_full(qdev_get_child_bus(DEVICE(&mms->i2c[i]), "i2c")); + } + } + mms->bootinfo.ram_size = machine->ram_size; mms->bootinfo.board_id = -1; mms->bootinfo.loader_start = mmc->loader_start; -- 2.34.1 Add the remaining devices (or unimplemented-device stubs) for this board: SPI controllers, SCC, FPGAIO, I2S, RTC, the QSPI write-config block, and ethernet. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206132931.38376-13-peter.maydell@linaro.org --- hw/arm/mps3r.c | 74 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 74 insertions(+) diff --git a/hw/arm/mps3r.c b/hw/arm/mps3r.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps3r.c +++ b/hw/arm/mps3r.c @@ -XXX,XX +XXX,XX @@ #include "hw/char/cmsdk-apb-uart.h" #include "hw/i2c/arm_sbcon_i2c.h" #include "hw/intc/arm_gicv3.h" +#include "hw/misc/mps2-scc.h" +#include "hw/misc/mps2-fpgaio.h" #include "hw/misc/unimp.h" +#include "hw/net/lan9118.h" +#include "hw/rtc/pl031.h" +#include "hw/ssi/pl022.h" #include "hw/timer/cmsdk-apb-dualtimer.h" #include "hw/watchdog/cmsdk-apb-watchdog.h" @@ -XXX,XX +XXX,XX @@ struct MPS3RMachineState { CMSDKAPBWatchdog watchdog; CMSDKAPBDualTimer dualtimer; ArmSbconI2CState i2c[5]; + PL022State spi[3]; + MPS2SCC scc; + MPS2FPGAIO fpgaio; + UnimplementedDeviceState i2s_audio; + PL031State rtc; Clock *clk; }; @@ -XXX,XX +XXX,XX @@ static const RAMInfo an536_raminfo[] = { } }; +static const int an536_oscclk[] = { + 24000000, /* 24MHz reference for RTC and timers */ + 50000000, /* 50MHz ACLK */ + 50000000, /* 50MHz MCLK */ + 50000000, /* 50MHz GPUCLK */ + 24576000, /* 24.576MHz AUDCLK */ + 23750000, /* 23.75MHz HDLCDCLK */ + 100000000, /* 100MHz DDR4_REF_CLK */ +}; + static MemoryRegion *mr_for_raminfo(MPS3RMachineState *mms, const RAMInfo *raminfo) { @@ -XXX,XX +XXX,XX @@ static void mps3r_common_init(MachineState *machine) MPS3RMachineClass *mmc = MPS3R_MACHINE_GET_CLASS(mms); MemoryRegion *sysmem = get_system_memory(); DeviceState *gicdev; + QList *oscclk; mms->clk = clock_new(OBJECT(machine), "CLK"); clock_set_hz(mms->clk, CLK_FRQ); @@ -XXX,XX +XXX,XX @@ static void mps3r_common_init(MachineState *machine) } } + for (int i = 0; i < ARRAY_SIZE(mms->spi); i++) { + g_autofree char *s = g_strdup_printf("spi%d", i); + hwaddr baseaddr = 0xe0104000 + i * 0x1000; + + object_initialize_child(OBJECT(mms), s, &mms->spi[i], TYPE_PL022); + sysbus_realize(SYS_BUS_DEVICE(&mms->spi[i]), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->spi[i]), 0, baseaddr); + sysbus_connect_irq(SYS_BUS_DEVICE(&mms->spi[i]), 0, + qdev_get_gpio_in(gicdev, 22 + i)); + } + + object_initialize_child(OBJECT(mms), "scc", &mms->scc, TYPE_MPS2_SCC); + qdev_prop_set_uint32(DEVICE(&mms->scc), "scc-cfg0", 0); + qdev_prop_set_uint32(DEVICE(&mms->scc), "scc-cfg4", 0x2); + qdev_prop_set_uint32(DEVICE(&mms->scc), "scc-aid", 0x00200008); + qdev_prop_set_uint32(DEVICE(&mms->scc), "scc-id", 0x41055360); + oscclk = qlist_new(); + for (int i = 0; i < ARRAY_SIZE(an536_oscclk); i++) { + qlist_append_int(oscclk, an536_oscclk[i]); + } + qdev_prop_set_array(DEVICE(&mms->scc), "oscclk", oscclk); + sysbus_realize(SYS_BUS_DEVICE(&mms->scc), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->scc), 0, 0xe0200000); + + create_unimplemented_device("i2s-audio", 0xe0201000, 0x1000); + + object_initialize_child(OBJECT(mms), "fpgaio", &mms->fpgaio, + TYPE_MPS2_FPGAIO); + qdev_prop_set_uint32(DEVICE(&mms->fpgaio), "prescale-clk", an536_oscclk[1]); + qdev_prop_set_uint32(DEVICE(&mms->fpgaio), "num-leds", 10); + qdev_prop_set_bit(DEVICE(&mms->fpgaio), "has-switches", true); + qdev_prop_set_bit(DEVICE(&mms->fpgaio), "has-dbgctrl", false); + sysbus_realize(SYS_BUS_DEVICE(&mms->fpgaio), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->fpgaio), 0, 0xe0202000); + + create_unimplemented_device("clcd", 0xe0209000, 0x1000); + + object_initialize_child(OBJECT(mms), "rtc", &mms->rtc, TYPE_PL031); + sysbus_realize(SYS_BUS_DEVICE(&mms->rtc), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->rtc), 0, 0xe020a000); + sysbus_connect_irq(SYS_BUS_DEVICE(&mms->rtc), 0, + qdev_get_gpio_in(gicdev, 4)); + + /* + * In hardware this is a LAN9220; the LAN9118 is software compatible + * except that it doesn't support the checksum-offload feature. + */ + lan9118_init(0xe0300000, + qdev_get_gpio_in(gicdev, 18)); + + create_unimplemented_device("usb", 0xe0301000, 0x1000); + create_unimplemented_device("qspi-write-config", 0xe0600000, 0x1000); + mms->bootinfo.ram_size = machine->ram_size; mms->bootinfo.board_id = -1; mms->bootinfo.loader_start = mmc->loader_start; -- 2.34.1 Add documentation for the mps3-an536 board type. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206132931.38376-14-peter.maydell@linaro.org --- docs/system/arm/mps2.rst | 37 ++++++++++++++++++++++++++++++++++--- 1 file changed, 34 insertions(+), 3 deletions(-) diff --git a/docs/system/arm/mps2.rst b/docs/system/arm/mps2.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/mps2.rst +++ b/docs/system/arm/mps2.rst @@ -XXX,XX +XXX,XX @@ -Arm MPS2 and MPS3 boards (``mps2-an385``, ``mps2-an386``, ``mps2-an500``, ``mps2-an505``, ``mps2-an511``, ``mps2-an521``, ``mps3-an524``, ``mps3-an547``) -========================================================================================================================================================= +Arm MPS2 and MPS3 boards (``mps2-an385``, ``mps2-an386``, ``mps2-an500``, ``mps2-an505``, ``mps2-an511``, ``mps2-an521``, ``mps3-an524``, ``mps3-an536``, ``mps3-an547``) +========================================================================================================================================================================= -These board models all use Arm M-profile CPUs. +These board models use Arm M-profile or R-profile CPUs. The Arm MPS2, MPS2+ and MPS3 dev boards are FPGA based (the 2+ has a bigger FPGA but is otherwise the same as the 2; the 3 has a bigger @@ -XXX,XX +XXX,XX @@ FPGA image. QEMU models the following FPGA images: +FPGA images using M-profile CPUs: + ``mps2-an385`` Cortex-M3 as documented in Arm Application Note AN385 ``mps2-an386`` @@ -XXX,XX +XXX,XX @@ QEMU models the following FPGA images: ``mps3-an547`` Cortex-M55 on an MPS3, as documented in Arm Application Note AN547 +FPGA images using R-profile CPUs: + +``mps3-an536`` + Dual Cortex-R52 on an MPS3, as documented in Arm Application Note AN536 + Differences between QEMU and real hardware: - AN385/AN386 remapping of low 16K of memory to either ZBT SSRAM1 or to @@ -XXX,XX +XXX,XX @@ Differences between QEMU and real hardware: flash, but only as simple ROM, so attempting to rewrite the flash from the guest will fail - QEMU does not model the USB controller in MPS3 boards +- AN536 does not support runtime control of CPU reset and halt via + the SCC CFG_REG0 register. +- AN536 does not support enabling or disabling the flash and ATCM + interfaces via the SCC CFG_REG1 register. +- AN536 does not support setting of the initial vector table + base address via the SCC CFG_REG6 and CFG_REG7 register config, + and does not provide a mechanism for specifying these values at + startup, so all guest images must be built to start from TCM + (i.e. to expect the interrupt vector base at 0 from reset). +- AN536 defaults to only creating a single CPU; this is the equivalent + of the way the real FPGA image usually runs with the second Cortex-R52 + held in halt via the initial SCC CFG_REG0 register setting. You can + create the second CPU with ``-smp 2``; both CPUs will then start + execution immediately on startup. + +Note that for the AN536 the first UART is accessible only by +CPU0, and the second UART is accessible only by CPU1. The +first UART accessible shared between both CPUs is the third +UART. Guest software might therefore be built to use either +the first UART or the third UART; if you don't see any output +from the UART you are looking at, try one of the others. +(Even if the AN536 machine is started with a single CPU and so +no "CPU1-only UART", the UART numbering remains the same, +with the third UART being the first of the shared ones.) Machine-specific options """""""""""""""""""""""" -- 2.34.1 Hi; here's another arm pullreq; main parts here are the new i.MX 8MM EVK board, and a lot of refactoring. thanks -- PMM The following changes since commit aa15257174da180c6a8a9d58f87319cfe61c5520: Merge tag 'pbouvier/pr/plugins-20260424' of https://gitlab.com/p-b-o/qemu into staging (2026-04-25 10:22:04 -0400) are available in the Git repository at: https://gitlab.com/pm215/qemu.git tags/pull-target-arm-20260427 for you to fetch changes up to 4575da5ecb7a27544aa6da1f78e700e8100ceaea: target/arm: report register in WFIT syndromes (2026-04-27 11:46:34 +0100) ---------------------------------------------------------------- target-arm queue: docs/system: add FEAT_AA32 and FEAT_AA64 to emulation list hw/arm: Add the i.MX 8MM EVK(Evaluation Kit) board target/arm: Build M-profile helper code once only hw/arm: Remove hw_error() for the unimplemented CM_LMBUSCNT register hw: Move ARM_SYSCTL_GPIO definitions to arm sysctl specific header target/arm: Allow 'aarch64=off' to be set for TCG CPUs target/arm: Allow some sysregs to not have to be an exact match for migration hw/arm/raspi4b: NOP all DTB nodes when removing unimplemented devices hw/arm/fsl-imx6ul: Implement LCDIF display device target/arm: Refactor syndrome value code to use registerfields target/arm: Report the register in WFxT syndromes ---------------------------------------------------------------- Alex Bennée (24): docs/system: add FEAT_AA32 and FEAT_AA64 to emulation list target/arm: migrate basic syndrome helpers to registerfields target/arm: migrate system/cp trap syndromes to registerfields target/arm: migrate FP/SIMD trap syndromes to registerfields target/arm: migrate eret trap syndromes to registerfields target/arm: migrate SME trap syndromes to registerfields target/arm: migrate PAC trap syndromes to registerfields target/arm: migrate BTI trap syndromes to registerfields target/arm: migrate BXJ trap syndromes to registerfields target/arm: migrate Granule Protection traps to registerfields target/arm: migrate fault syndromes to registerfields target/arm: migrate debug syndromes to registerfields target/arm: migrate wfx syndromes to registerfields target/arm: migrate gcs syndromes to registerfields target/arm: migrate memory op syndromes to registerfields target/arm: migrate check_hcr_el2_trap to use syndrome helper target/arm: use syndrome helpers in arm_cpu_do_interrupt_aarch32_hyp target/arm: use syndrome helpers to set SAME_EL EC bit target/arm: make whpx use syndrome helpers for decode target/arm: make hvf use syndrome helpers for decode target/arm: use syndrome helpers in merge_syn_data_abort target/arm: use syndrome helpers to query VNCR bit target/arm: remove old syndrome defines target/arm: report register in WFIT syndromes Eric Auger (7): target/arm/cpu: Introduce the infrastructure for cpreg migration tolerances target/arm/machine: Handle ToleranceNotOnBothEnds migration tolerances target/arm/machine: Handle ToleranceOnlySrcTestValue migration tolerance target/arm/cpu64: Mitigate migration failures due to spurious TCR_EL1, PIRE0_EL1 and PIR_EL1 target/arm/cpu64: Define cpreg migration tolerance for KVM_REG_ARM_VENDOR_HYP_BMAP_2 target/arm/helper: Define cpreg migration tolerance for DGBDTR_EL0 Revert "target/arm: Reinstate bogus AArch32 DBGDTRTX register for migration compat" Gaurav Sharma (15): hw/arm: Add the i.MX 8MM EVK(Evaluation Kit) board hw/misc/imx8mp_analog: Add property to analog device hw/arm/fsl-imx8mm: Add Analog device IP to iMX8MM SOC hw/arm/fsl-imx8mm: Add Clock Control Module IP to iMX8MM hw/arm/fsl-imx8mm: Implemented support for SNVS hw/arm/fsl-imx8mm: Adding support for USDHC storage controllers hw/arm/fsl-imx8mm: Add PCIe support hw/arm/fsl-imx8mm: Add GPIO controllers hw/arm/fsl-imx8mm: Adding support for I2C emulation hw/arm/fsl-imx8mm: Adding support for SPI controller hw/arm/fsl-imx8mm: Adding support for Watchdog Timers hw/arm/fsl-imx8mm: Adding support for General Purpose Timers hw/arm/fsl-imx8mm: Adding support for ENET ethernet controller hw/arm/fsl-imx8mm: Adding support for USB controller hw/arm/fsl-imx8mm: Adding functional testing of iMX8MM emulation Osama Abdelkader (1): hw/arm/raspi4b: NOP all DTB nodes when removing unimplemented devices Peter Maydell (4): hw: Move ARM_SYSCTL_GPIO definitions to arm sysctl specific header target/arm: Clear AArch64 ID regs from ARMISARegisters if AArch64 disabled target/arm: Allow 'aarch64=off' to be set for TCG CPUs tests/functional/aarch64: Add basic test of TCG aarch64=off Philippe Mathieu-Daudé (9): target/arm: Ignore endianness when setting MTE tags target/arm: Explode MO_TExx -> MO_TE | MO_xx target/arm: Hoist MO_TE into mve_advance_vpt() target/arm: Hoist MO_TE into MVE DO_VSTR() macro target/arm: Introduce mo_endian() helper target/arm: Replace MO_TE -> mo_endian() for MVE helpers target/arm: Compile mve_helper.c once target/arm: Replace MO_TE -> mo_endian() for Cortex-M helpers target/arm: Compile m_helper.c once Thomas Huth (1): hw/arm: Remove hw_error() for the unimplemented CM_LMBUSCNT register Yucai Liu (2): hw/display: Add i.MX6UL LCDIF device model hw/arm/fsl-imx6ul: Wire in the LCDIF device model MAINTAINERS | 16 +- docs/system/arm/cpu-features.rst | 10 +- docs/system/arm/emulation.rst | 2 + docs/system/arm/{imx8mp-evk.rst => imx8m.rst} | 49 +- docs/system/target-arm.rst | 2 +- hw/arm/Kconfig | 25 + hw/arm/fsl-imx6ul.c | 12 +- hw/arm/fsl-imx8mm.c | 704 ++++++++++++++++++++++ hw/arm/imx8mm-evk.c | 130 ++++ hw/arm/integratorcp.c | 3 - hw/arm/meson.build | 2 + hw/arm/raspi4b.c | 10 +- hw/arm/realview.c | 2 +- hw/arm/vexpress.c | 2 +- hw/arm/virt.c | 1 - hw/display/Kconfig | 4 + hw/display/imx6ul_lcdif.c | 453 ++++++++++++++ hw/display/meson.build | 1 + hw/misc/arm_sysctl.c | 2 +- hw/misc/imx8mp_analog.c | 12 +- hw/timer/imx_gpt.c | 26 + hw/vmapple/vmapple.c | 1 - include/hw/arm/fsl-imx6ul.h | 4 +- include/hw/arm/fsl-imx8mm.h | 242 ++++++++ include/hw/arm/primecell.h | 12 - include/hw/display/imx6ul_lcdif.h | 37 ++ include/hw/misc/arm_sysctl.h | 16 + include/hw/misc/imx8mp_analog.h | 3 + include/hw/timer/imx_gpt.h | 2 + target/arm/cpu-features.h | 5 + target/arm/cpu.c | 153 ++++- target/arm/cpu.h | 4 +- target/arm/cpu64.c | 39 ++ target/arm/debug_helper.c | 29 - target/arm/helper.c | 27 +- target/arm/hvf/hvf.c | 14 +- target/arm/internals.h | 60 ++ target/arm/machine.c | 33 +- target/arm/syndrome.h | 595 ++++++++++++++---- target/arm/tcg/debug.c | 2 +- target/arm/tcg/helper-a64.c | 2 +- target/arm/tcg/helper-defs.h | 2 +- target/arm/tcg/m_helper.c | 8 +- target/arm/tcg/meson.build | 6 +- target/arm/tcg/mve_helper.c | 102 ++-- target/arm/tcg/op_helper.c | 7 +- target/arm/tcg/tlb_helper.c | 6 +- target/arm/tcg/translate-a64.c | 2 +- target/arm/tcg/vfp_helper.c | 5 +- target/arm/trace-events | 2 + target/arm/whpx/whpx-all.c | 13 +- tests/functional/aarch64/meson.build | 3 + tests/functional/aarch64/test_imx8mm_evk.py | 69 +++ tests/functional/aarch64/test_virt_aarch64_off.py | 37 ++ tests/qtest/arm-cpu-features.c | 8 +- 55 files changed, 2743 insertions(+), 275 deletions(-) rename docs/system/arm/{imx8mp-evk.rst => imx8m.rst} (58%) create mode 100644 hw/arm/fsl-imx8mm.c create mode 100644 hw/arm/imx8mm-evk.c create mode 100644 hw/display/imx6ul_lcdif.c create mode 100644 include/hw/arm/fsl-imx8mm.h delete mode 100644 include/hw/arm/primecell.h create mode 100644 include/hw/display/imx6ul_lcdif.h create mode 100644 include/hw/misc/arm_sysctl.h create mode 100755 tests/functional/aarch64/test_imx8mm_evk.py create mode 100755 tests/functional/aarch64/test_virt_aarch64_off.py From: Alex Bennée <alex.bennee@linaro.org> This is just a documentation tweak as we already support both. FEAT_AA32 implies FEAT_AA32EL0. FEAT_AA64 implies FEAT_AA64EL[0123]. This is however useful if you are using emulation.rst as a source of truth of what QEMU emulates and when cross checking with Features.json from Arm. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260421093506.616307-1-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 2 ++ 1 file changed, 2 insertions(+) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ QEMU's TCG emulation includes support for the Armv5, Armv6, Armv7, Armv8 and Armv9 versions of the A-profile architecture. It also has support for the following architecture extensions: +- FEAT_AA32 (PE Support for AArch32) - FEAT_AA32BF16 (AArch32 BFloat16 instructions) - FEAT_AA32EL0 (Support for AArch32 at EL0) - FEAT_AA32EL1 (Support for AArch32 at EL1) @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_AA32EL3 (Support for AArch32 at EL3) - FEAT_AA32HPD (AArch32 hierarchical permission disables) - FEAT_AA32I8MM (AArch32 Int8 matrix multiplication instructions) +- FEAT_AA64 (PE uses AArch64 after last reboot) - FEAT_AA64EL0 (Support for AArch64 at EL0) - FEAT_AA64EL1 (Support for AArch64 at EL1) - FEAT_AA64EL2 (Support for AArch64 at EL2) -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> Implemented CPUs, RAM, UARTs and Interrupt Controller Other peripherals are represented as TYPE_UNIMPLEMENTED_DEVICE Complete memory map of the SoC is provided. Set default RAM size to 2GB and default CPU count to 4 to match the real i.MX8MM EVK hardware configuration. Documentation is shared with imx8mp-evk to avoid duplication. Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> [PMM: fixed over-long lines in doc] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 11 +- docs/system/arm/{imx8mp-evk.rst => imx8m.rst} | 49 ++- docs/system/target-arm.rst | 2 +- hw/arm/Kconfig | 12 + hw/arm/fsl-imx8mm.c | 377 ++++++++++++++++++ hw/arm/imx8mm-evk.c | 112 ++++++ hw/arm/meson.build | 2 + include/hw/arm/fsl-imx8mm.h | 158 ++++++++ 8 files changed, 709 insertions(+), 14 deletions(-) rename docs/system/arm/{imx8mp-evk.rst => imx8m.rst} (58%) create mode 100644 hw/arm/fsl-imx8mm.c create mode 100644 hw/arm/imx8mm-evk.c create mode 100644 include/hw/arm/fsl-imx8mm.h diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/pci-host/designware.c F: include/hw/pci-host/designware.h F: docs/system/arm/mcimx7d-sabre.rst +MCIMX8MM-EVK / iMX8MM +M: Gaurav Sharma <gaurav.sharma_7@nxp.com> +L: qemu-arm@nongnu.org +S: Maintained +F: hw/arm/fsl-imx8mm.c +F: hw/arm/imx8mm-evk.c +F: include/hw/arm/fsl-imx8mm.h +F: docs/system/arm/imx8m.rst + MCIMX8MP-EVK / i.MX8MP M: Bernhard Beschow <shentey@gmail.com> L: qemu-arm@nongnu.org @@ -XXX,XX +XXX,XX @@ F: hw/rtc/rs5c372.c F: include/hw/arm/fsl-imx8mp.h F: include/hw/misc/imx8mp_*.h F: include/hw/pci-host/fsl_imx8m_phy.h -F: docs/system/arm/imx8mp-evk.rst +F: docs/system/arm/imx8m.rst F: tests/functional/aarch64/test_imx8mp_evk.py F: tests/qtest/rs5c372-test.c diff --git a/docs/system/arm/imx8mp-evk.rst b/docs/system/arm/imx8m.rst similarity index 58% rename from docs/system/arm/imx8mp-evk.rst rename to docs/system/arm/imx8m.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/imx8mp-evk.rst +++ b/docs/system/arm/imx8m.rst @@ -XXX,XX +XXX,XX @@ -NXP i.MX 8M Plus Evaluation Kit (``imx8mp-evk``) -================================================ +NXP i.MX 8M Plus and i.MX 8M Mini Evaluation Kits (``imx8mp-evk``, ``imx8mm-evk``) +================================================================================== -The ``imx8mp-evk`` machine models the i.MX 8M Plus Evaluation Kit, based on an -i.MX 8M Plus SoC. +The ``imx8mp-evk`` and ``imx8mm-evk`` machine models the i.MX 8M Plus +and i.MX 8M Mini Evaluation Kits, based on i.MX 8M Plus and i.MX8M +Mini SoCs. Supported devices ----------------- -The ``imx8mp-evk`` machine implements the following devices: +The ``imx8mp-evk`` and ``imx8mm-evk`` machines implement the +following devices: * Up to 4 Cortex-A53 cores * Generic Interrupt Controller (GICv3) @@ -XXX,XX +XXX,XX @@ The ``imx8mp-evk`` machine implements the following devices: Boot options ------------ -The ``imx8mp-evk`` machine can start a Linux kernel directly using the standard -``-kernel`` functionality. +The ``imx8mp-evk`` and ``imx8mm-evk`` machines can start a Linux +kernel directly using the standard ``-kernel`` functionality. Direct Linux Kernel Boot '''''''''''''''''''''''' @@ -XXX,XX +XXX,XX @@ is to generate an image with Buildroot. Version 2024.11.1 is tested at the time of writing and involves two steps. First run the following commands in the toplevel directory of the Buildroot source tree: +For i.MX 8M Plus EVK: + .. code-block:: bash $ make freescale_imx8mpevk_defconfig $ make +For i.MX 8M Mini EVK: + +.. code-block:: bash + + $ make freescale_imx8mmevk_defconfig + $ make + Once finished successfully there is an ``output/image`` subfolder. Navigate into it and resize the SD card image to a power of two: @@ -XXX,XX +XXX,XX @@ it and resize the SD card image to a power of two: Now that everything is prepared the machine can be started as follows: +For i.MX 8M Plus EVK: + .. code-block:: bash $ qemu-system-aarch64 -M imx8mp-evk \ @@ -XXX,XX +XXX,XX @@ Now that everything is prepared the machine can be started as follows: -append "root=/dev/mmcblk2p2" \ -drive file=sdcard.img,if=sd,bus=2,format=raw,id=mmcblk2 +For i.MX 8M Mini EVK: + +.. code-block:: bash + + $ qemu-system-aarch64 -M imx8mm-evk -smp 4 -m 2G \ + -display none -serial null -serial stdio \ + -kernel Image \ + -dtb imx8mm-evk.dtb \ + -append "root=/dev/mmcblk2p2" \ + -drive file=sdcard.img,if=sd,bus=2,format=raw,id=mmcblk2 KVM Acceleration ---------------- @@ -XXX,XX +XXX,XX @@ To enable hardware-assisted acceleration via KVM, append ``-accel kvm`` to the command line. While this speeds up performance significantly, be aware of the following limitations: -* The ``imx8mp-evk`` machine is not included under the "virtualization use case" - of :doc:`QEMU's security policy </system/security>`. This means that you - should not trust that it can contain malicious guests, whether it is run - using TCG or KVM. If you don't trust your guests and you're relying on QEMU to - be the security boundary, you want to choose another machine such as ``virt``. +* The ``imx8mp-evk`` and ``imx8mm-evk`` machines are not included + under the "virtualization use case" of :doc:`QEMU's security + policy </system/security>`. This means that you should not trust that + it can contain malicious guests, whether it is run using TCG or KVM. + If you don't trust your guests and you're relying on QEMU to be the + security boundary, you want to choose another machine such as + ``virt``. * Rather than Cortex-A53 CPUs, the same CPU type as the host's will be used. This is a limitation of KVM and may not work with guests with a tight dependency on Cortex-A53. diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/target-arm.rst +++ b/docs/system/target-arm.rst @@ -XXX,XX +XXX,XX @@ Board-specific documentation arm/imx25-pdk arm/mcimx6ul-evk arm/mcimx7d-sabre - arm/imx8mp-evk + arm/imx8m arm/orangepi arm/raspi arm/collie diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MP_EVK depends on TCG select FSL_IMX8MP +config FSL_IMX8MM + bool + select ARM_GIC + select IMX + +config FSL_IMX8MM_EVK + bool + default y + depends on AARCH64 + depends on TCG + select FSL_IMX8MM + config ARM_SMMUV3_ACCEL bool depends on ARM_SMMUV3 diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ +/* + * i.MX 8MM SoC Implementation + * + * Based on hw/arm/fsl-imx6.c + * + * Copyright (c) 2025, NXP Semiconductors + * Author: Gaurav Sharma <gaurav.sharma_7@nxp.com> + * + * SPDX-License-Identifier: GPL-2.0-or-later + * + * iMX8MM Reference Manual - https://www.nxp.com/products/i.MX8MMINI -> Documentation + */ + +#include "qemu/osdep.h" +#include "system/address-spaces.h" +#include "hw/arm/bsa.h" +#include "hw/arm/fsl-imx8mm.h" +#include "hw/misc/unimp.h" +#include "hw/core/boards.h" +#include "system/kvm.h" +#include "system/system.h" +#include "target/arm/cpu.h" +#include "target/arm/cpu-qom.h" +#include "target/arm/kvm_arm.h" +#include "qapi/error.h" +#include "qobject/qlist.h" + +static const struct { + hwaddr addr; + size_t size; + const char *name; +} fsl_imx8mm_memmap[] = { + [FSL_IMX8MM_RAM] = { FSL_IMX8MM_RAM_START, FSL_IMX8MM_RAM_SIZE_MAX, "ram" }, + [FSL_IMX8MM_DDR_PHY_BROADCAST] = { 0x3dc00000, 4 * MiB, "ddr_phy_broadcast" }, + [FSL_IMX8MM_DDR_PERF_MON] = { 0x3d800000, 4 * MiB, "ddr_perf_mon" }, + [FSL_IMX8MM_DDR_CTL] = { 0x3d400000, 4 * MiB, "ddr_ctl" }, + [FSL_IMX8MM_DDR_PHY] = { 0x3c000000, 16 * MiB, "ddr_phy" }, + [FSL_IMX8MM_GIC_DIST] = { 0x38800000, 512 * KiB, "gic_dist" }, + [FSL_IMX8MM_GIC_REDIST] = { 0x38880000, 512 * KiB, "gic_redist" }, + [FSL_IMX8MM_VPU] = { 0x38340000, 2 * MiB, "vpu" }, + [FSL_IMX8MM_VPU_BLK_CTRL] = { 0x38330000, 2 * MiB, "vpu_blk_ctrl" }, + [FSL_IMX8MM_VPU_G2_DECODER] = { 0x38310000, 1 * MiB, "vpu_g2_decoder" }, + [FSL_IMX8MM_VPU_G1_DECODER] = { 0x38300000, 1 * MiB, "vpu_g1_decoder" }, + [FSL_IMX8MM_USB2_OTG] = { 0x32e50200, 0x200, "usb2_otg" }, + [FSL_IMX8MM_USB2] = { 0x32e50000, 0x200, "usb2" }, + [FSL_IMX8MM_USB1_OTG] = { 0x32e40200, 0x200, "usb1_otg" }, + [FSL_IMX8MM_USB1] = { 0x32e40000, 0x200, "usb1" }, + [FSL_IMX8MM_GPU2D] = { 0x38000000, 64 * KiB, "gpu2d" }, + [FSL_IMX8MM_QSPI1_RX_BUFFER] = { 0x34000000, 32 * MiB, "qspi1_rx_buffer" }, + [FSL_IMX8MM_PCIE1] = { 0x33800000, 4 * MiB, "pcie1" }, + [FSL_IMX8MM_QSPI1_TX_BUFFER] = { 0x33008000, 32 * KiB, "qspi1_tx_buffer" }, + [FSL_IMX8MM_APBH_DMA] = { 0x33000000, 32 * KiB, "apbh_dma" }, + + /* AIPS-4 Begin */ + [FSL_IMX8MM_TZASC] = { 0x32f80000, 64 * KiB, "tzasc" }, + [FSL_IMX8MM_PCIE_PHY1] = { 0x32f00000, 64 * KiB, "pcie_phy1" }, + [FSL_IMX8MM_MEDIA_BLK_CTL] = { 0x32e28000, 256, "media_blk_ctl" }, + [FSL_IMX8MM_LCDIF] = { 0x32e00000, 64 * KiB, "lcdif" }, + [FSL_IMX8MM_MIPI_DSI] = { 0x32e10000, 64 * KiB, "mipi_dsi" }, + [FSL_IMX8MM_MIPI_CSI] = { 0x32e30000, 64 * KiB, "mipi_csi" }, + [FSL_IMX8MM_AIPS4_CONFIGURATION] = { 0x32df0000, 64 * KiB, "aips4_configuration" }, + /* AIPS-4 End */ + + [FSL_IMX8MM_INTERCONNECT] = { 0x32700000, 1 * MiB, "interconnect" }, + + /* AIPS-3 Begin */ + [FSL_IMX8MM_ENET1] = { 0x30be0000, 64 * KiB, "enet1" }, + [FSL_IMX8MM_SDMA1] = { 0x30bd0000, 64 * KiB, "sdma1" }, + [FSL_IMX8MM_QSPI] = { 0x30bb0000, 64 * KiB, "qspi" }, + [FSL_IMX8MM_USDHC3] = { 0x30b60000, 64 * KiB, "usdhc3" }, + [FSL_IMX8MM_USDHC2] = { 0x30b50000, 64 * KiB, "usdhc2" }, + [FSL_IMX8MM_USDHC1] = { 0x30b40000, 64 * KiB, "usdhc1" }, + [FSL_IMX8MM_SEMAPHORE_HS] = { 0x30ac0000, 64 * KiB, "semaphore_hs" }, + [FSL_IMX8MM_MU_B] = { 0x30ab0000, 64 * KiB, "mu_b" }, + [FSL_IMX8MM_MU_A] = { 0x30aa0000, 64 * KiB, "mu_a" }, + [FSL_IMX8MM_UART4] = { 0x30a60000, 64 * KiB, "uart4" }, + [FSL_IMX8MM_I2C4] = { 0x30a50000, 64 * KiB, "i2c4" }, + [FSL_IMX8MM_I2C3] = { 0x30a40000, 64 * KiB, "i2c3" }, + [FSL_IMX8MM_I2C2] = { 0x30a30000, 64 * KiB, "i2c2" }, + [FSL_IMX8MM_I2C1] = { 0x30a20000, 64 * KiB, "i2c1" }, + [FSL_IMX8MM_AIPS3_CONFIGURATION] = { 0x309f0000, 64 * KiB, "aips3_configuration" }, + [FSL_IMX8MM_CAAM] = { 0x30900000, 256 * KiB, "caam" }, + [FSL_IMX8MM_SPBA1] = { 0x308f0000, 64 * KiB, "spba1" }, + [FSL_IMX8MM_UART2] = { 0x30890000, 64 * KiB, "uart2" }, + [FSL_IMX8MM_UART3] = { 0x30880000, 64 * KiB, "uart3" }, + [FSL_IMX8MM_UART1] = { 0x30860000, 64 * KiB, "uart1" }, + [FSL_IMX8MM_ECSPI3] = { 0x30840000, 64 * KiB, "ecspi3" }, + [FSL_IMX8MM_ECSPI2] = { 0x30830000, 64 * KiB, "ecspi2" }, + [FSL_IMX8MM_ECSPI1] = { 0x30820000, 64 * KiB, "ecspi1" }, + /* AIPS-3 End */ + + /* AIPS-2 Begin */ + [FSL_IMX8MM_QOSC] = { 0x307f0000, 64 * KiB, "qosc" }, + [FSL_IMX8MM_PERFMON2] = { 0x307d0000, 64 * KiB, "perfmon2" }, + [FSL_IMX8MM_PERFMON1] = { 0x307c0000, 64 * KiB, "perfmon1" }, + [FSL_IMX8MM_GPT4] = { 0x30700000, 64 * KiB, "gpt4" }, + [FSL_IMX8MM_GPT5] = { 0x306f0000, 64 * KiB, "gpt5" }, + [FSL_IMX8MM_GPT6] = { 0x306e0000, 64 * KiB, "gpt6" }, + [FSL_IMX8MM_SYSCNT_CTRL] = { 0x306c0000, 64 * KiB, "syscnt_ctrl" }, + [FSL_IMX8MM_SYSCNT_CMP] = { 0x306b0000, 64 * KiB, "syscnt_cmp" }, + [FSL_IMX8MM_SYSCNT_RD] = { 0x306a0000, 64 * KiB, "syscnt_rd" }, + [FSL_IMX8MM_PWM4] = { 0x30690000, 64 * KiB, "pwm4" }, + [FSL_IMX8MM_PWM3] = { 0x30680000, 64 * KiB, "pwm3" }, + [FSL_IMX8MM_PWM2] = { 0x30670000, 64 * KiB, "pwm2" }, + [FSL_IMX8MM_PWM1] = { 0x30660000, 64 * KiB, "pwm1" }, + [FSL_IMX8MM_AIPS2_CONFIGURATION] = { 0x305f0000, 64 * KiB, "aips2_configuration" }, + /* AIPS-2 End */ + + /* AIPS-1 Begin */ + [FSL_IMX8MM_CSU] = { 0x303e0000, 64 * KiB, "csu" }, + [FSL_IMX8MM_RDC] = { 0x303d0000, 64 * KiB, "rdc" }, + [FSL_IMX8MM_SEMAPHORE2] = { 0x303c0000, 64 * KiB, "semaphore2" }, + [FSL_IMX8MM_SEMAPHORE1] = { 0x303b0000, 64 * KiB, "semaphore1" }, + [FSL_IMX8MM_GPC] = { 0x303a0000, 64 * KiB, "gpc" }, + [FSL_IMX8MM_SRC] = { 0x30390000, 64 * KiB, "src" }, + [FSL_IMX8MM_CCM] = { 0x30380000, 64 * KiB, "ccm" }, + [FSL_IMX8MM_SNVS_HP] = { 0x30370000, 64 * KiB, "snvs_hp" }, + [FSL_IMX8MM_ANA_PLL] = { 0x30360000, 64 * KiB, "ana_pll" }, + [FSL_IMX8MM_OCOTP_CTRL] = { 0x30350000, 64 * KiB, "ocotp_ctrl" }, + [FSL_IMX8MM_IOMUXC_GPR] = { 0x30340000, 64 * KiB, "iomuxc_gpr" }, + [FSL_IMX8MM_IOMUXC] = { 0x30330000, 64 * KiB, "iomuxc" }, + [FSL_IMX8MM_GPT3] = { 0x302f0000, 64 * KiB, "gpt3" }, + [FSL_IMX8MM_GPT2] = { 0x302e0000, 64 * KiB, "gpt2" }, + [FSL_IMX8MM_GPT1] = { 0x302d0000, 64 * KiB, "gpt1" }, + [FSL_IMX8MM_SDMA2] = { 0x302c0000, 64 * KiB, "sdma2" }, + [FSL_IMX8MM_SDMA3] = { 0x302b0000, 64 * KiB, "sdma3" }, + [FSL_IMX8MM_WDOG3] = { 0x302a0000, 64 * KiB, "wdog3" }, + [FSL_IMX8MM_WDOG2] = { 0x30290000, 64 * KiB, "wdog2" }, + [FSL_IMX8MM_WDOG1] = { 0x30280000, 64 * KiB, "wdog1" }, + [FSL_IMX8MM_ANA_OSC] = { 0x30270000, 64 * KiB, "ana_osc" }, + [FSL_IMX8MM_ANA_TSENSOR] = { 0x30260000, 64 * KiB, "ana_tsensor" }, + [FSL_IMX8MM_GPIO5] = { 0x30240000, 64 * KiB, "gpio5" }, + [FSL_IMX8MM_GPIO4] = { 0x30230000, 64 * KiB, "gpio4" }, + [FSL_IMX8MM_GPIO3] = { 0x30220000, 64 * KiB, "gpio3" }, + [FSL_IMX8MM_GPIO2] = { 0x30210000, 64 * KiB, "gpio2" }, + [FSL_IMX8MM_GPIO1] = { 0x30200000, 64 * KiB, "gpio1" }, + [FSL_IMX8MM_AIPS1_CONFIGURATION] = { 0x301f0000, 64 * KiB, "aips1_configuration" }, + [FSL_IMX8MM_SAI6] = { 0x30060000, 64 * KiB, "sai6" }, + [FSL_IMX8MM_SAI5] = { 0x30050000, 64 * KiB, "sai5" }, + [FSL_IMX8MM_SAI3] = { 0x30030000, 64 * KiB, "sai3" }, + [FSL_IMX8MM_SAI2] = { 0x30020000, 64 * KiB, "sai2" }, + [FSL_IMX8MM_SAI1] = { 0x30010000, 64 * KiB, "sai1" }, + + /* AIPS-1 End */ + + [FSL_IMX8MM_A53_DAP] = { 0x28000000, 16 * MiB, "a53_dap" }, + [FSL_IMX8MM_PCIE1_MEM] = { 0x18000000, 128 * MiB, "pcie1_mem" }, + [FSL_IMX8MM_QSPI_MEM] = { 0x08000000, 256 * MiB, "qspi_mem" }, + [FSL_IMX8MM_OCRAM] = { 0x00900000, 256 * KiB, "ocram" }, + [FSL_IMX8MM_TCM_DTCM] = { 0x00800000, 128 * KiB, "tcm_dtcm" }, + [FSL_IMX8MM_TCM_ITCM] = { 0x007e0000, 128 * KiB, "tcm_itcm" }, + [FSL_IMX8MM_OCRAM_S] = { 0x00180000, 32 * KiB, "ocram_s" }, + [FSL_IMX8MM_CAAM_MEM] = { 0x00100000, 32 * KiB, "caam_mem" }, + [FSL_IMX8MM_BOOT_ROM_PROTECTED] = { 0x0003f000, 4 * KiB, "boot_rom_protected" }, + [FSL_IMX8MM_BOOT_ROM] = { 0x00000000, 252 * KiB, "boot_rom" }, +}; + +static void fsl_imx8mm_init(Object *obj) +{ + MachineState *ms = MACHINE(qdev_get_machine()); + FslImx8mmState *s = FSL_IMX8MM(obj); + const char *cpu_type = ms->cpu_type ?: ARM_CPU_TYPE_NAME("cortex-a53"); + int i; + + for (i = 0; i < MIN(ms->smp.cpus, FSL_IMX8MM_NUM_CPUS); i++) { + g_autofree char *name = g_strdup_printf("cpu%d", i); + object_initialize_child(obj, name, &s->cpu[i], cpu_type); + } + + object_initialize_child(obj, "gic", &s->gic, gicv3_class_name()); + + for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) { + g_autofree char *name = g_strdup_printf("uart%d", i + 1); + object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); + } + +} + +static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) +{ + MachineState *ms = MACHINE(qdev_get_machine()); + FslImx8mmState *s = FSL_IMX8MM(dev); + DeviceState *gicdev = DEVICE(&s->gic); + int i; + + if (ms->smp.cpus > FSL_IMX8MM_NUM_CPUS) { + error_setg(errp, "%s: Only %d CPUs are supported (%d requested)", + TYPE_FSL_IMX8MM, FSL_IMX8MM_NUM_CPUS, ms->smp.cpus); + return; + } + + /* CPUs */ + for (i = 0; i < ms->smp.cpus; i++) { + /* On uniprocessor, the CBAR is set to 0 */ + if (ms->smp.cpus > 1 && + object_property_find(OBJECT(&s->cpu[i]), "reset-cbar")) { + object_property_set_int(OBJECT(&s->cpu[i]), "reset-cbar", + fsl_imx8mm_memmap[FSL_IMX8MM_GIC_DIST].addr, + &error_abort); + } + + /* + * CNTFID0 base frequency in Hz of system counter + */ + object_property_set_int(OBJECT(&s->cpu[i]), "cntfrq", 8000000, + &error_abort); + + if (object_property_find(OBJECT(&s->cpu[i]), "has_el2")) { + object_property_set_bool(OBJECT(&s->cpu[i]), "has_el2", + !kvm_enabled(), &error_abort); + } + + if (object_property_find(OBJECT(&s->cpu[i]), "has_el3")) { + object_property_set_bool(OBJECT(&s->cpu[i]), "has_el3", + !kvm_enabled(), &error_abort); + } + + if (i) { + /* + * Secondary CPUs start in powered-down state (and can be + * powered up via the SRC system reset controller) + */ + object_property_set_bool(OBJECT(&s->cpu[i]), "start-powered-off", + true, &error_abort); + } + + if (!qdev_realize(DEVICE(&s->cpu[i]), NULL, errp)) { + return; + } + } + + /* GIC */ + { + SysBusDevice *gicsbd = SYS_BUS_DEVICE(&s->gic); + QList *redist_region_count; + bool pmu = object_property_get_bool(OBJECT(first_cpu), "pmu", NULL); + + qdev_prop_set_uint32(gicdev, "num-cpu", ms->smp.cpus); + qdev_prop_set_uint32(gicdev, "num-irq", + FSL_IMX8MM_NUM_IRQS + GIC_INTERNAL); + redist_region_count = qlist_new(); + qlist_append_int(redist_region_count, ms->smp.cpus); + qdev_prop_set_array(gicdev, "redist-region-count", redist_region_count); + object_property_set_link(OBJECT(&s->gic), "sysmem", + OBJECT(get_system_memory()), &error_fatal); + if (!sysbus_realize(gicsbd, errp)) { + return; + } + sysbus_mmio_map(gicsbd, 0, fsl_imx8mm_memmap[FSL_IMX8MM_GIC_DIST].addr); + sysbus_mmio_map(gicsbd, 1, fsl_imx8mm_memmap[FSL_IMX8MM_GIC_REDIST].addr); + + /* + * Wire the outputs from each CPU's generic timer and the GICv3 + * maintenance interrupt signal to the appropriate GIC PPI inputs, and + * the GIC's IRQ/FIQ interrupt outputs to the CPU's inputs. + */ + for (i = 0; i < ms->smp.cpus; i++) { + DeviceState *cpudev = DEVICE(&s->cpu[i]); + int intidbase = FSL_IMX8MM_NUM_IRQS + i * GIC_INTERNAL; + qemu_irq irq; + + /* + * Mapping from the output timer irq lines from the CPU to the + * GIC PPI inputs. + */ + static const int timer_irqs[] = { + [GTIMER_PHYS] = ARCH_TIMER_NS_EL1_IRQ, + [GTIMER_VIRT] = ARCH_TIMER_VIRT_IRQ, + [GTIMER_HYP] = ARCH_TIMER_NS_EL2_IRQ, + [GTIMER_SEC] = ARCH_TIMER_S_EL1_IRQ, + }; + + for (int j = 0; j < ARRAY_SIZE(timer_irqs); j++) { + irq = qdev_get_gpio_in(gicdev, intidbase + timer_irqs[j]); + qdev_connect_gpio_out(cpudev, j, irq); + } + + irq = qdev_get_gpio_in(gicdev, intidbase + ARCH_GIC_MAINT_IRQ); + qdev_connect_gpio_out_named(cpudev, "gicv3-maintenance-interrupt", + 0, irq); + + irq = qdev_get_gpio_in(gicdev, intidbase + VIRTUAL_PMU_IRQ); + qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0, irq); + + sysbus_connect_irq(gicsbd, i, + qdev_get_gpio_in(cpudev, ARM_CPU_IRQ)); + sysbus_connect_irq(gicsbd, i + ms->smp.cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_FIQ)); + sysbus_connect_irq(gicsbd, i + 2 * ms->smp.cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_VIRQ)); + sysbus_connect_irq(gicsbd, i + 3 * ms->smp.cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ)); + + if (kvm_enabled()) { + if (pmu) { + assert(arm_feature(&s->cpu[i].env, ARM_FEATURE_PMU)); + if (kvm_irqchip_in_kernel()) { + kvm_arm_pmu_set_irq(&s->cpu[i], VIRTUAL_PMU_IRQ); + } + kvm_arm_pmu_init(&s->cpu[i]); + } + } + } + } + + /* UARTs */ + for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) { + static const struct { + hwaddr addr; + unsigned int irq; + } serial_table[FSL_IMX8MM_NUM_UARTS] = { + { fsl_imx8mm_memmap[FSL_IMX8MM_UART1].addr, FSL_IMX8MM_UART1_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_UART2].addr, FSL_IMX8MM_UART2_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_UART3].addr, FSL_IMX8MM_UART3_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_UART4].addr, FSL_IMX8MM_UART4_IRQ }, + }; + + qdev_prop_set_chr(DEVICE(&s->uart[i]), "chardev", serial_hd(i)); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->uart[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->uart[i]), 0, serial_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->uart[i]), 0, + qdev_get_gpio_in(gicdev, serial_table[i].irq)); + } + + /* On-Chip RAM */ + if (!memory_region_init_ram(&s->ocram, OBJECT(dev), "imx8mm.ocram", + fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].size, + errp)) { + return; + } + memory_region_add_subregion(get_system_memory(), + fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr, + &s->ocram); + + /* Unimplemented devices */ + for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) { + switch (i) { + case FSL_IMX8MM_GIC_DIST: + case FSL_IMX8MM_GIC_REDIST: + case FSL_IMX8MM_RAM: + case FSL_IMX8MM_OCRAM: + case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4: + /* device implemented and treated above */ + break; + + default: + create_unimplemented_device(fsl_imx8mm_memmap[i].name, + fsl_imx8mm_memmap[i].addr, + fsl_imx8mm_memmap[i].size); + break; + } + } +} + +static void fsl_imx8mm_class_init(ObjectClass *oc, const void *data) +{ + DeviceClass *dc = DEVICE_CLASS(oc); + + dc->realize = fsl_imx8mm_realize; + + dc->desc = "i.MX 8MM SoC"; +} + +static const TypeInfo fsl_imx8mm_types[] = { + { + .name = TYPE_FSL_IMX8MM, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(FslImx8mmState), + .instance_init = fsl_imx8mm_init, + .class_init = fsl_imx8mm_class_init, + }, +}; + +DEFINE_TYPES(fsl_imx8mm_types) diff --git a/hw/arm/imx8mm-evk.c b/hw/arm/imx8mm-evk.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/imx8mm-evk.c @@ -XXX,XX +XXX,XX @@ +/* + * NXP i.MX 8MM Evaluation Kit System Emulation + * + * Copyright (c) 2025, NXP Semiconductors + * Author: Gaurav Sharma <gaurav.sharma_7@nxp.com> + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#include "qemu/osdep.h" +#include "system/address-spaces.h" +#include "hw/arm/boot.h" +#include "hw/arm/fsl-imx8mm.h" +#include "hw/arm/machines-qom.h" +#include "hw/core/boards.h" +#include "hw/core/qdev-properties.h" +#include "system/kvm.h" +#include "system/qtest.h" +#include "qemu/error-report.h" +#include "qapi/error.h" +#include <libfdt.h> + +static void imx8mm_evk_modify_dtb(const struct arm_boot_info *info, void *fdt) +{ + int i, offset; + + /* Temporarily disable following nodes until they are implemented */ + const char *nodes_to_remove[] = { + "nxp,imx8mm-fspi", + "fsl,imx8mm-mipi-csi", + "fsl,imx8mm-mipi-dsim" + }; + + for (i = 0; i < ARRAY_SIZE(nodes_to_remove); i++) { + const char *dev_str = nodes_to_remove[i]; + + offset = fdt_node_offset_by_compatible(fdt, -1, dev_str); + while (offset >= 0) { + fdt_nop_node(fdt, offset); + offset = fdt_node_offset_by_compatible(fdt, offset, dev_str); + } + } + + /* Remove cpu-idle-states property from CPU nodes */ + offset = fdt_node_offset_by_compatible(fdt, -1, "arm,cortex-a53"); + while (offset >= 0) { + fdt_nop_property(fdt, offset, "cpu-idle-states"); + offset = fdt_node_offset_by_compatible(fdt, offset, "arm,cortex-a53"); + } + + if (kvm_enabled()) { + /* Use system counter frequency from host CPU to fix time in guest */ + offset = fdt_node_offset_by_compatible(fdt, -1, "arm,armv8-timer"); + while (offset >= 0) { + fdt_nop_property(fdt, offset, "clock-frequency"); + offset = fdt_node_offset_by_compatible(fdt, offset, "arm,armv8-timer"); + } + } +} + +static void imx8mm_evk_init(MachineState *machine) +{ + static struct arm_boot_info boot_info; + FslImx8mmState *s; + + if (machine->ram_size > FSL_IMX8MM_RAM_SIZE_MAX) { + error_report("RAM size " RAM_ADDR_FMT " above max supported (%08" PRIx64 ")", + machine->ram_size, FSL_IMX8MM_RAM_SIZE_MAX); + exit(1); + } + + boot_info = (struct arm_boot_info) { + .loader_start = FSL_IMX8MM_RAM_START, + .board_id = -1, + .ram_size = machine->ram_size, + .psci_conduit = QEMU_PSCI_CONDUIT_SMC, + .modify_dtb = imx8mm_evk_modify_dtb, + }; + + s = FSL_IMX8MM(object_new_with_props(TYPE_FSL_IMX8MM, OBJECT(machine), + "soc", &error_fatal, NULL)); + sysbus_realize_and_unref(SYS_BUS_DEVICE(s), &error_fatal); + + memory_region_add_subregion(get_system_memory(), FSL_IMX8MM_RAM_START, + machine->ram); + + if (!qtest_enabled()) { + arm_load_kernel(&s->cpu[0], machine, &boot_info); + } +} + +static const char *imx8mm_evk_get_default_cpu_type(const MachineState *ms) +{ + if (kvm_enabled()) { + return ARM_CPU_TYPE_NAME("host"); + } + + return ARM_CPU_TYPE_NAME("cortex-a53"); +} + +static void imx8mm_evk_machine_init(MachineClass *mc) +{ + mc->desc = "NXP i.MX 8MM EVK Board"; + mc->init = imx8mm_evk_init; + mc->max_cpus = FSL_IMX8MM_NUM_CPUS; + mc->default_cpus = FSL_IMX8MM_NUM_CPUS; + mc->default_ram_size = 2 * GiB; + mc->default_ram_id = "imx8mm-evk.ram"; + mc->get_default_cpu_type = imx8mm_evk_get_default_cpu_type; +} + +DEFINE_MACHINE_AARCH64("imx8mm-evk", imx8mm_evk_machine_init) diff --git a/hw/arm/meson.build b/hw/arm/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/meson.build +++ b/hw/arm/meson.build @@ -XXX,XX +XXX,XX @@ arm_common_ss.add(when: 'CONFIG_ARMSSE', if_true: files('armsse.c')) arm_common_ss.add(when: 'CONFIG_FSL_IMX7', if_true: files('fsl-imx7.c', 'mcimx7d-sabre.c')) arm_common_ss.add(when: 'CONFIG_FSL_IMX8MP', if_true: files('fsl-imx8mp.c')) arm_common_ss.add(when: 'CONFIG_FSL_IMX8MP_EVK', if_true: files('imx8mp-evk.c')) +arm_common_ss.add(when: 'CONFIG_FSL_IMX8MM', if_true: files('fsl-imx8mm.c')) +arm_common_ss.add(when: 'CONFIG_FSL_IMX8MM_EVK', if_true: files('imx8mm-evk.c')) arm_common_ss.add(when: 'CONFIG_ARM_SMMUV3', if_true: files('smmuv3.c')) arm_common_ss.add(when: 'CONFIG_ARM_SMMUV3_ACCEL', if_true: files('smmuv3-accel.c')) stub_ss.add(files('smmuv3-accel-stubs.c')) diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ +/* + * i.MX 8MM SoC Definitions + * + * Copyright (c) 2025, NXP Semiconductors + * Author: Gaurav Sharma <gaurav.sharma_7@nxp.com> + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#ifndef FSL_IMX8MM_H +#define FSL_IMX8MM_H + +#include "cpu.h" +#include "hw/char/imx_serial.h" +#include "hw/intc/arm_gicv3_common.h" +#include "qom/object.h" +#include "qemu/units.h" + +#define TYPE_FSL_IMX8MM "fsl-imx8mm" +OBJECT_DECLARE_SIMPLE_TYPE(FslImx8mmState, FSL_IMX8MM) + +#define FSL_IMX8MM_RAM_START 0x40000000 +#define FSL_IMX8MM_RAM_SIZE_MAX (4 * GiB) + +enum FslImx8mmConfiguration { + FSL_IMX8MM_NUM_CPUS = 4, + FSL_IMX8MM_NUM_IRQS = 128, + FSL_IMX8MM_NUM_UARTS = 4, +}; + +struct FslImx8mmState { + SysBusDevice parent_obj; + + ARMCPU cpu[FSL_IMX8MM_NUM_CPUS]; + GICv3State gic; + IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; + MemoryRegion ocram; +}; + +enum FslImx8mmMemoryRegions { + FSL_IMX8MM_A53_DAP, + FSL_IMX8MM_AIPS1_CONFIGURATION, + FSL_IMX8MM_AIPS2_CONFIGURATION, + FSL_IMX8MM_AIPS3_CONFIGURATION, + FSL_IMX8MM_AIPS4_CONFIGURATION, + FSL_IMX8MM_ANA_OSC, + FSL_IMX8MM_ANA_PLL, + FSL_IMX8MM_ANA_TSENSOR, + FSL_IMX8MM_APBH_DMA, + FSL_IMX8MM_BOOT_ROM, + FSL_IMX8MM_BOOT_ROM_PROTECTED, + FSL_IMX8MM_CAAM, + FSL_IMX8MM_CAAM_MEM, + FSL_IMX8MM_CCM, + FSL_IMX8MM_CSU, + FSL_IMX8MM_DDR_CTL, + FSL_IMX8MM_DDR_PERF_MON, + FSL_IMX8MM_DDR_PHY, + FSL_IMX8MM_DDR_PHY_BROADCAST, + FSL_IMX8MM_ECSPI1, + FSL_IMX8MM_ECSPI2, + FSL_IMX8MM_ECSPI3, + FSL_IMX8MM_ENET1, + FSL_IMX8MM_GIC_DIST, + FSL_IMX8MM_GIC_REDIST, + FSL_IMX8MM_GPC, + FSL_IMX8MM_GPIO1, + FSL_IMX8MM_GPIO2, + FSL_IMX8MM_GPIO3, + FSL_IMX8MM_GPIO4, + FSL_IMX8MM_GPIO5, + FSL_IMX8MM_GPT1, + FSL_IMX8MM_GPT2, + FSL_IMX8MM_GPT3, + FSL_IMX8MM_GPT4, + FSL_IMX8MM_GPT5, + FSL_IMX8MM_GPT6, + FSL_IMX8MM_GPU2D, + FSL_IMX8MM_I2C1, + FSL_IMX8MM_I2C2, + FSL_IMX8MM_I2C3, + FSL_IMX8MM_I2C4, + FSL_IMX8MM_INTERCONNECT, + FSL_IMX8MM_IOMUXC, + FSL_IMX8MM_IOMUXC_GPR, + FSL_IMX8MM_MEDIA_BLK_CTL, + FSL_IMX8MM_LCDIF, + FSL_IMX8MM_MIPI_CSI, + FSL_IMX8MM_MIPI_DSI, + FSL_IMX8MM_MU_A, + FSL_IMX8MM_MU_B, + FSL_IMX8MM_OCOTP_CTRL, + FSL_IMX8MM_OCRAM, + FSL_IMX8MM_OCRAM_S, + FSL_IMX8MM_PCIE1, + FSL_IMX8MM_PCIE1_MEM, + FSL_IMX8MM_PCIE_PHY1, + FSL_IMX8MM_PERFMON1, + FSL_IMX8MM_PERFMON2, + FSL_IMX8MM_PWM1, + FSL_IMX8MM_PWM2, + FSL_IMX8MM_PWM3, + FSL_IMX8MM_PWM4, + FSL_IMX8MM_QOSC, + FSL_IMX8MM_QSPI, + FSL_IMX8MM_QSPI1_RX_BUFFER, + FSL_IMX8MM_QSPI1_TX_BUFFER, + FSL_IMX8MM_QSPI_MEM, + FSL_IMX8MM_RAM, + FSL_IMX8MM_RDC, + FSL_IMX8MM_SAI1, + FSL_IMX8MM_SAI2, + FSL_IMX8MM_SAI3, + FSL_IMX8MM_SAI5, + FSL_IMX8MM_SAI6, + FSL_IMX8MM_SDMA1, + FSL_IMX8MM_SDMA2, + FSL_IMX8MM_SDMA3, + FSL_IMX8MM_SEMAPHORE1, + FSL_IMX8MM_SEMAPHORE2, + FSL_IMX8MM_SEMAPHORE_HS, + FSL_IMX8MM_SNVS_HP, + FSL_IMX8MM_SPBA1, + FSL_IMX8MM_SRC, + FSL_IMX8MM_SYSCNT_CMP, + FSL_IMX8MM_SYSCNT_CTRL, + FSL_IMX8MM_SYSCNT_RD, + FSL_IMX8MM_TCM_DTCM, + FSL_IMX8MM_TCM_ITCM, + FSL_IMX8MM_TZASC, + FSL_IMX8MM_UART1, + FSL_IMX8MM_UART2, + FSL_IMX8MM_UART3, + FSL_IMX8MM_UART4, + FSL_IMX8MM_USB1, + FSL_IMX8MM_USB2, + FSL_IMX8MM_USB1_OTG, + FSL_IMX8MM_USB2_OTG, + FSL_IMX8MM_USDHC1, + FSL_IMX8MM_USDHC2, + FSL_IMX8MM_USDHC3, + FSL_IMX8MM_VPU, + FSL_IMX8MM_VPU_BLK_CTRL, + FSL_IMX8MM_VPU_G1_DECODER, + FSL_IMX8MM_VPU_G2_DECODER, + FSL_IMX8MM_WDOG1, + FSL_IMX8MM_WDOG2, + FSL_IMX8MM_WDOG3, +}; + +enum FslImx8mmIrqs { + FSL_IMX8MM_UART1_IRQ = 26, + FSL_IMX8MM_UART2_IRQ = 27, + FSL_IMX8MM_UART3_IRQ = 28, + FSL_IMX8MM_UART4_IRQ = 29, +}; + +#endif /* FSL_IMX8MM_H */ -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> Add configurable properties for register reset values that differ between i.MX 8M variants (Plus, Mini, etc.). This allows the same device implementation to be shared across multiple SoCs. Properties added: - arm-pll-fdiv-ctl0-reset: ARM PLL divider control reset value Default value is set to match i.MX 8MP reset value (0x000FA031). This can be overridden in the variant like iMX8MM with its own reset value. Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/imx8mp_analog.c | 12 +++++++++++- include/hw/misc/imx8mp_analog.h | 3 +++ 2 files changed, 14 insertions(+), 1 deletion(-) diff --git a/hw/misc/imx8mp_analog.c b/hw/misc/imx8mp_analog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/imx8mp_analog.c +++ b/hw/misc/imx8mp_analog.c @@ -XXX,XX +XXX,XX @@ #include "qemu/log.h" #include "hw/misc/imx8mp_analog.h" +#include "hw/core/qdev-properties.h" #include "migration/vmstate.h" #define ANALOG_PLL_LOCK BIT(31) @@ -XXX,XX +XXX,XX @@ static void imx8mp_analog_reset(DeviceState *dev) s->analog[ANALOG_VPU_PLL_LOCKD_CTRL] = 0x0010003f; s->analog[ANALOG_VPU_PLL_MNIT_CTRL] = 0x00280081; s->analog[ANALOG_ARM_PLL_GEN_CTRL] = 0x00000810; - s->analog[ANALOG_ARM_PLL_FDIV_CTL0] = 0x000fa031; + + /* Use property value instead of hardcoded */ + s->analog[ANALOG_ARM_PLL_FDIV_CTL0] = s->arm_pll_fdiv_ctl0_reset; + s->analog[ANALOG_ARM_PLL_LOCKD_CTRL] = 0x0010003f; s->analog[ANALOG_ARM_PLL_MNIT_CTRL] = 0x00280081; s->analog[ANALOG_SYS_PLL1_GEN_CTRL] = 0x0aaaa810; @@ -XXX,XX +XXX,XX @@ static const VMStateDescription imx8mp_analog_vmstate = { }, }; +static const Property imx8mp_analog_properties[] = { + DEFINE_PROP_UINT32("arm-pll-fdiv-ctl0-reset", IMX8MPAnalogState, + arm_pll_fdiv_ctl0_reset, 0x000fa031), /* imx8mp default */ +}; + static void imx8mp_analog_class_init(ObjectClass *klass, const void *data) { DeviceClass *dc = DEVICE_CLASS(klass); device_class_set_legacy_reset(dc, imx8mp_analog_reset); + device_class_set_props(dc, imx8mp_analog_properties); dc->vmsd = &imx8mp_analog_vmstate; dc->desc = "i.MX 8M Plus Analog Module"; } diff --git a/include/hw/misc/imx8mp_analog.h b/include/hw/misc/imx8mp_analog.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/imx8mp_analog.h +++ b/include/hw/misc/imx8mp_analog.h @@ -XXX,XX +XXX,XX @@ struct IMX8MPAnalogState { } mmio; uint32_t analog[ANALOG_MAX]; + + /* Property for variant-specific reset values */ + uint32_t arm_pll_fdiv_ctl0_reset; }; #endif /* IMX8MP_ANALOG_H */ -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> Add the Analog IP to i.MX8MM SoC. iMX8MM and i.MX8MP uses the same Analog IP so the analog ip source will be shared. The ARM PLL divider control register (arm-pll-fdiv-ctl0) has a different reset value on i.MX8MM (0x000fa030) compared to i.MX8MP (0x000fa031). So iMX8MM will be overriding this property with its own reset-value. Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx8mm.c | 12 ++++++++++++ include/hw/arm/fsl-imx8mm.h | 2 ++ 3 files changed, 15 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MP_EVK config FSL_IMX8MM bool select ARM_GIC + select FSL_IMX8MP_ANALOG select IMX config FSL_IMX8MM_EVK diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, "gic", &s->gic, gicv3_class_name()); + object_initialize_child(obj, "analog", &s->analog, TYPE_IMX8MP_ANALOG); + for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) { g_autofree char *name = g_strdup_printf("uart%d", i + 1); object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) } } + /* Analog */ + object_property_set_uint(OBJECT(&s->analog), "arm-pll-fdiv-ctl0-reset", + 0x000fa030, &error_abort); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->analog), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->analog), 0, + fsl_imx8mm_memmap[FSL_IMX8MM_ANA_PLL].addr); + /* UARTs */ for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) { static const struct { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) /* Unimplemented devices */ for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) { switch (i) { + case FSL_IMX8MM_ANA_PLL: case FSL_IMX8MM_GIC_DIST: case FSL_IMX8MM_GIC_REDIST: case FSL_IMX8MM_RAM: diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "hw/char/imx_serial.h" #include "hw/intc/arm_gicv3_common.h" +#include "hw/misc/imx8mp_analog.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { ARMCPU cpu[FSL_IMX8MM_NUM_CPUS]; GICv3State gic; + IMX8MPAnalogState analog; IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; }; -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> Add the Clock Control Module (CCM) device to i.MX8MM SoC. The CCM implementation is shared with i.MX8MP as the register layout is identical between the two variants.Hence iMX8MM will be using the source of iMX8MP CCM. Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx8mm.c | 10 ++++++++++ include/hw/arm/fsl-imx8mm.h | 2 ++ 3 files changed, 13 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM bool select ARM_GIC select FSL_IMX8MP_ANALOG + select FSL_IMX8MP_CCM select IMX config FSL_IMX8MM_EVK diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, "gic", &s->gic, gicv3_class_name()); + object_initialize_child(obj, "ccm", &s->ccm, TYPE_IMX8MP_CCM); + object_initialize_child(obj, "analog", &s->analog, TYPE_IMX8MP_ANALOG); for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) } } + /* CCM */ + if (!sysbus_realize(SYS_BUS_DEVICE(&s->ccm), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->ccm), 0, + fsl_imx8mm_memmap[FSL_IMX8MM_CCM].addr); + /* Analog */ object_property_set_uint(OBJECT(&s->analog), "arm-pll-fdiv-ctl0-reset", 0x000fa030, &error_abort); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) { switch (i) { case FSL_IMX8MM_ANA_PLL: + case FSL_IMX8MM_CCM: case FSL_IMX8MM_GIC_DIST: case FSL_IMX8MM_GIC_REDIST: case FSL_IMX8MM_RAM: diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/char/imx_serial.h" #include "hw/intc/arm_gicv3_common.h" #include "hw/misc/imx8mp_analog.h" +#include "hw/misc/imx8mp_ccm.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { ARMCPU cpu[FSL_IMX8MM_NUM_CPUS]; GICv3State gic; + IMX8MPCCMState ccm; IMX8MPAnalogState analog; IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> SNVS contains an RTC which allows Linux to deal correctly with time Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/fsl-imx8mm.c | 10 ++++++++++ include/hw/arm/fsl-imx8mm.h | 2 ++ 2 files changed, 12 insertions(+) diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, "analog", &s->analog, TYPE_IMX8MP_ANALOG); + object_initialize_child(obj, "snvs", &s->snvs, TYPE_IMX7_SNVS); + for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) { g_autofree char *name = g_strdup_printf("uart%d", i + 1); object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr, &s->ocram); + /* SNVS */ + if (!sysbus_realize(SYS_BUS_DEVICE(&s->snvs), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, + fsl_imx8mm_memmap[FSL_IMX8MM_SNVS_HP].addr); + /* Unimplemented devices */ for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) { switch (i) { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_GIC_REDIST: case FSL_IMX8MM_RAM: case FSL_IMX8MM_OCRAM: + case FSL_IMX8MM_SNVS_HP: case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4: /* device implemented and treated above */ break; diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "hw/char/imx_serial.h" #include "hw/intc/arm_gicv3_common.h" +#include "hw/misc/imx7_snvs.h" #include "hw/misc/imx8mp_analog.h" #include "hw/misc/imx8mp_ccm.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { GICv3State gic; IMX8MPCCMState ccm; IMX8MPAnalogState analog; + IMX7SNVSState snvs; IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; }; -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> It enables emulation of SD/MMC cards through a virtual SDHCI interface The emulated SDHCI controller allows guest OS to use emulated storage as a standard block device. This will allow running the images such as those generated by Buildroot. Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx8mm.c | 25 +++++++++++++++++++++++++ hw/arm/imx8mm-evk.c | 17 +++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 7 +++++++ 4 files changed, 50 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM select FSL_IMX8MP_ANALOG select FSL_IMX8MP_CCM select IMX + select SDHCI config FSL_IMX8MM_EVK bool diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); } + for (i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) { + g_autofree char *name = g_strdup_printf("usdhc%d", i + 1); + object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC); + } } static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr, &s->ocram); + /* USDHCs */ + for (i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) { + static const struct { + hwaddr addr; + unsigned int irq; + } usdhc_table[FSL_IMX8MM_NUM_USDHCS] = { + { fsl_imx8mm_memmap[FSL_IMX8MM_USDHC1].addr, FSL_IMX8MM_USDHC1_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_USDHC2].addr, FSL_IMX8MM_USDHC2_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_USDHC3].addr, FSL_IMX8MM_USDHC3_IRQ }, + }; + + if (!sysbus_realize(SYS_BUS_DEVICE(&s->usdhc[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->usdhc[i]), 0, usdhc_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->usdhc[i]), 0, + qdev_get_gpio_in(gicdev, usdhc_table[i].irq)); + } + /* SNVS */ if (!sysbus_realize(SYS_BUS_DEVICE(&s->snvs), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_OCRAM: case FSL_IMX8MM_SNVS_HP: case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4: + case FSL_IMX8MM_USDHC1 ... FSL_IMX8MM_USDHC3: /* device implemented and treated above */ break; diff --git a/hw/arm/imx8mm-evk.c b/hw/arm/imx8mm-evk.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/imx8mm-evk.c +++ b/hw/arm/imx8mm-evk.c @@ -XXX,XX +XXX,XX @@ static void imx8mm_evk_init(MachineState *machine) memory_region_add_subregion(get_system_memory(), FSL_IMX8MM_RAM_START, machine->ram); + for (int i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) { + BusState *bus; + DeviceState *carddev; + BlockBackend *blk; + DriveInfo *di = drive_get(IF_SD, i, 0); + + if (!di) { + continue; + } + + blk = blk_by_legacy_dinfo(di); + bus = qdev_get_child_bus(DEVICE(&s->usdhc[i]), "sd-bus"); + carddev = qdev_new(TYPE_SD_CARD); + qdev_prop_set_drive_err(carddev, "drive", blk, &error_fatal); + qdev_realize_and_unref(carddev, bus, &error_fatal); + } + if (!qtest_enabled()) { arm_load_kernel(&s->cpu[0], machine, &boot_info); } diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx8mp_analog.h" #include "hw/misc/imx8mp_ccm.h" +#include "hw/sd/sdhci.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ enum FslImx8mmConfiguration { FSL_IMX8MM_NUM_CPUS = 4, FSL_IMX8MM_NUM_IRQS = 128, FSL_IMX8MM_NUM_UARTS = 4, + FSL_IMX8MM_NUM_USDHCS = 3, }; struct FslImx8mmState { @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMX7SNVSState snvs; IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; + SDHCIState usdhc[FSL_IMX8MM_NUM_USDHCS]; }; enum FslImx8mmMemoryRegions { @@ -XXX,XX +XXX,XX @@ enum FslImx8mmMemoryRegions { }; enum FslImx8mmIrqs { + FSL_IMX8MM_USDHC1_IRQ = 22, + FSL_IMX8MM_USDHC2_IRQ = 23, + FSL_IMX8MM_USDHC3_IRQ = 24, + FSL_IMX8MM_UART1_IRQ = 26, FSL_IMX8MM_UART2_IRQ = 27, FSL_IMX8MM_UART3_IRQ = 28, -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> This enables support for Designware PCI Express Controller emulation It provides a controlled environment to debug the linux pci subsystem Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 3 +++ hw/arm/fsl-imx8mm.c | 30 ++++++++++++++++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 10 ++++++++++ 3 files changed, 43 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MP_EVK config FSL_IMX8MM bool + imply PCI_DEVICES select ARM_GIC select FSL_IMX8MP_ANALOG select FSL_IMX8MP_CCM select IMX select SDHCI + select PCI_EXPRESS_DESIGNWARE + select PCI_EXPRESS_FSL_IMX8M_PHY config FSL_IMX8MM_EVK bool diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) g_autofree char *name = g_strdup_printf("usdhc%d", i + 1); object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC); } + + object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST); + object_initialize_child(obj, "pcie_phy", &s->pcie_phy, + TYPE_FSL_IMX8M_PCIE_PHY); } static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, fsl_imx8mm_memmap[FSL_IMX8MM_SNVS_HP].addr); + /* PCIe */ + if (!sysbus_realize(SYS_BUS_DEVICE(&s->pcie), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->pcie), 0, + fsl_imx8mm_memmap[FSL_IMX8MM_PCIE1].addr); + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 0, + qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_INTA_IRQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 1, + qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_INTB_IRQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 2, + qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_INTC_IRQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 3, + qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_INTD_IRQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 4, + qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_MSI_IRQ)); + + if (!sysbus_realize(SYS_BUS_DEVICE(&s->pcie_phy), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->pcie_phy), 0, + fsl_imx8mm_memmap[FSL_IMX8MM_PCIE_PHY1].addr); + /* Unimplemented devices */ for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) { switch (i) { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_CCM: case FSL_IMX8MM_GIC_DIST: case FSL_IMX8MM_GIC_REDIST: + case FSL_IMX8MM_PCIE1: + case FSL_IMX8MM_PCIE_PHY1: case FSL_IMX8MM_RAM: case FSL_IMX8MM_OCRAM: case FSL_IMX8MM_SNVS_HP: diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx8mp_analog.h" #include "hw/misc/imx8mp_ccm.h" +#include "hw/pci-host/designware.h" +#include "hw/pci-host/fsl_imx8m_phy.h" #include "hw/sd/sdhci.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; SDHCIState usdhc[FSL_IMX8MM_NUM_USDHCS]; + DesignwarePCIEHost pcie; + FslImx8mPciePhyState pcie_phy; }; enum FslImx8mmMemoryRegions { @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_UART2_IRQ = 27, FSL_IMX8MM_UART3_IRQ = 28, FSL_IMX8MM_UART4_IRQ = 29, + + FSL_IMX8MM_PCI_INTA_IRQ = 122, + FSL_IMX8MM_PCI_INTB_IRQ = 123, + FSL_IMX8MM_PCI_INTC_IRQ = 124, + FSL_IMX8MM_PCI_INTD_IRQ = 125, + FSL_IMX8MM_PCI_MSI_IRQ = 127, }; #endif /* FSL_IMX8MM_H */ -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> Enabled GPIO controller emulation Also updated the GPIO IRQ lines of iMX8MM Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/fsl-imx8mm.c | 54 +++++++++++++++++++++++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 14 ++++++++++ 2 files changed, 68 insertions(+) diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); } + for (i = 0; i < FSL_IMX8MM_NUM_GPIOS; i++) { + g_autofree char *name = g_strdup_printf("gpio%d", i + 1); + object_initialize_child(obj, name, &s->gpio[i], TYPE_IMX_GPIO); + } + for (i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) { g_autofree char *name = g_strdup_printf("usdhc%d", i + 1); object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr, &s->ocram); + /* GPIOs */ + for (i = 0; i < FSL_IMX8MM_NUM_GPIOS; i++) { + static const struct { + hwaddr addr; + unsigned int irq_low; + unsigned int irq_high; + } gpio_table[FSL_IMX8MM_NUM_GPIOS] = { + { + fsl_imx8mm_memmap[FSL_IMX8MM_GPIO1].addr, + FSL_IMX8MM_GPIO1_LOW_IRQ, + FSL_IMX8MM_GPIO1_HIGH_IRQ + }, + { + fsl_imx8mm_memmap[FSL_IMX8MM_GPIO2].addr, + FSL_IMX8MM_GPIO2_LOW_IRQ, + FSL_IMX8MM_GPIO2_HIGH_IRQ + }, + { + fsl_imx8mm_memmap[FSL_IMX8MM_GPIO3].addr, + FSL_IMX8MM_GPIO3_LOW_IRQ, + FSL_IMX8MM_GPIO3_HIGH_IRQ + }, + { + fsl_imx8mm_memmap[FSL_IMX8MM_GPIO4].addr, + FSL_IMX8MM_GPIO4_LOW_IRQ, + FSL_IMX8MM_GPIO4_HIGH_IRQ + }, + { + fsl_imx8mm_memmap[FSL_IMX8MM_GPIO5].addr, + FSL_IMX8MM_GPIO5_LOW_IRQ, + FSL_IMX8MM_GPIO5_HIGH_IRQ + }, + }; + object_property_set_bool(OBJECT(&s->gpio[i]), "has-edge-sel", true, + &error_abort); + object_property_set_bool(OBJECT(&s->gpio[i]), "has-upper-pin-irq", + true, &error_abort); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpio[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio[i]), 0, gpio_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 0, + qdev_get_gpio_in(gicdev, gpio_table[i].irq_low)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 1, + qdev_get_gpio_in(gicdev, gpio_table[i].irq_high)); + } + /* USDHCs */ for (i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) { static const struct { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_CCM: case FSL_IMX8MM_GIC_DIST: case FSL_IMX8MM_GIC_REDIST: + case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5: case FSL_IMX8MM_PCIE1: case FSL_IMX8MM_PCIE_PHY1: case FSL_IMX8MM_RAM: diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "hw/char/imx_serial.h" +#include "hw/gpio/imx_gpio.h" #include "hw/intc/arm_gicv3_common.h" #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx8mp_analog.h" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(FslImx8mmState, FSL_IMX8MM) enum FslImx8mmConfiguration { FSL_IMX8MM_NUM_CPUS = 4, + FSL_IMX8MM_NUM_GPIOS = 5, FSL_IMX8MM_NUM_IRQS = 128, FSL_IMX8MM_NUM_UARTS = 4, FSL_IMX8MM_NUM_USDHCS = 3, @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { ARMCPU cpu[FSL_IMX8MM_NUM_CPUS]; GICv3State gic; + IMXGPIOState gpio[FSL_IMX8MM_NUM_GPIOS]; IMX8MPCCMState ccm; IMX8MPAnalogState analog; IMX7SNVSState snvs; @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_UART3_IRQ = 28, FSL_IMX8MM_UART4_IRQ = 29, + FSL_IMX8MM_GPIO1_LOW_IRQ = 64, + FSL_IMX8MM_GPIO1_HIGH_IRQ = 65, + FSL_IMX8MM_GPIO2_LOW_IRQ = 66, + FSL_IMX8MM_GPIO2_HIGH_IRQ = 67, + FSL_IMX8MM_GPIO3_LOW_IRQ = 68, + FSL_IMX8MM_GPIO3_HIGH_IRQ = 69, + FSL_IMX8MM_GPIO4_LOW_IRQ = 70, + FSL_IMX8MM_GPIO4_HIGH_IRQ = 71, + FSL_IMX8MM_GPIO5_LOW_IRQ = 72, + FSL_IMX8MM_GPIO5_HIGH_IRQ = 73, + FSL_IMX8MM_PCI_INTA_IRQ = 122, FSL_IMX8MM_PCI_INTB_IRQ = 123, FSL_IMX8MM_PCI_INTC_IRQ = 124, -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> This can be used to test and debug I2C device drivers. Added I2C interrupts Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 2 ++ hw/arm/fsl-imx8mm.c | 27 +++++++++++++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 8 ++++++++ 3 files changed, 37 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MP_EVK config FSL_IMX8MM bool imply PCI_DEVICES + imply I2C_DEVICES select ARM_GIC select FSL_IMX8MP_ANALOG select FSL_IMX8MP_CCM select IMX + select IMX_I2C select SDHCI select PCI_EXPRESS_DESIGNWARE select PCI_EXPRESS_FSL_IMX8M_PHY diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); } + for (i = 0; i < FSL_IMX8MM_NUM_I2CS; i++) { + g_autofree char *name = g_strdup_printf("i2c%d", i + 1); + object_initialize_child(obj, name, &s->i2c[i], TYPE_IMX_I2C); + } + for (i = 0; i < FSL_IMX8MM_NUM_GPIOS; i++) { g_autofree char *name = g_strdup_printf("gpio%d", i + 1); object_initialize_child(obj, name, &s->gpio[i], TYPE_IMX_GPIO); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr, &s->ocram); + /* I2Cs */ + for (i = 0; i < FSL_IMX8MM_NUM_I2CS; i++) { + static const struct { + hwaddr addr; + unsigned int irq; + } i2c_table[FSL_IMX8MM_NUM_I2CS] = { + { fsl_imx8mm_memmap[FSL_IMX8MM_I2C1].addr, FSL_IMX8MM_I2C1_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_I2C2].addr, FSL_IMX8MM_I2C2_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_I2C3].addr, FSL_IMX8MM_I2C3_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_I2C4].addr, FSL_IMX8MM_I2C4_IRQ }, + }; + + if (!sysbus_realize(SYS_BUS_DEVICE(&s->i2c[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c[i]), 0, i2c_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c[i]), 0, + qdev_get_gpio_in(gicdev, i2c_table[i].irq)); + } + /* GPIOs */ for (i = 0; i < FSL_IMX8MM_NUM_GPIOS; i++) { static const struct { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_GIC_DIST: case FSL_IMX8MM_GIC_REDIST: case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5: + case FSL_IMX8MM_I2C1 ... FSL_IMX8MM_I2C4: case FSL_IMX8MM_PCIE1: case FSL_IMX8MM_PCIE_PHY1: case FSL_IMX8MM_RAM: diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "hw/char/imx_serial.h" #include "hw/gpio/imx_gpio.h" +#include "hw/i2c/imx_i2c.h" #include "hw/intc/arm_gicv3_common.h" #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx8mp_analog.h" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(FslImx8mmState, FSL_IMX8MM) enum FslImx8mmConfiguration { FSL_IMX8MM_NUM_CPUS = 4, FSL_IMX8MM_NUM_GPIOS = 5, + FSL_IMX8MM_NUM_I2CS = 4, FSL_IMX8MM_NUM_IRQS = 128, FSL_IMX8MM_NUM_UARTS = 4, FSL_IMX8MM_NUM_USDHCS = 3, @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMX8MPCCMState ccm; IMX8MPAnalogState analog; IMX7SNVSState snvs; + IMXI2CState i2c[FSL_IMX8MM_NUM_I2CS]; IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; SDHCIState usdhc[FSL_IMX8MM_NUM_USDHCS]; @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_UART3_IRQ = 28, FSL_IMX8MM_UART4_IRQ = 29, + FSL_IMX8MM_I2C1_IRQ = 35, + FSL_IMX8MM_I2C2_IRQ = 36, + FSL_IMX8MM_I2C3_IRQ = 37, + FSL_IMX8MM_I2C4_IRQ = 38, + FSL_IMX8MM_GPIO1_LOW_IRQ = 64, FSL_IMX8MM_GPIO1_HIGH_IRQ = 65, FSL_IMX8MM_GPIO2_LOW_IRQ = 66, -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> It enables emulation of ECSPI in iMX8MM Added SPI IRQ lines Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/fsl-imx8mm.c | 26 ++++++++++++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 7 +++++++ 2 files changed, 33 insertions(+) diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC); } + for (i = 0; i < FSL_IMX8MM_NUM_ECSPIS; i++) { + g_autofree char *name = g_strdup_printf("spi%d", i + 1); + object_initialize_child(obj, name, &s->spi[i], TYPE_IMX_SPI); + } + object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST); object_initialize_child(obj, "pcie_phy", &s->pcie_phy, TYPE_FSL_IMX8M_PCIE_PHY); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) qdev_get_gpio_in(gicdev, usdhc_table[i].irq)); } + /* ECSPIs */ + for (i = 0; i < FSL_IMX8MM_NUM_ECSPIS; i++) { + static const struct { + hwaddr addr; + unsigned int irq; + } spi_table[FSL_IMX8MM_NUM_ECSPIS] = { + { fsl_imx8mm_memmap[FSL_IMX8MM_ECSPI1].addr, FSL_IMX8MM_ECSPI1_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_ECSPI2].addr, FSL_IMX8MM_ECSPI2_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_ECSPI3].addr, FSL_IMX8MM_ECSPI3_IRQ }, + }; + + if (!sysbus_realize(SYS_BUS_DEVICE(&s->spi[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0, spi_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0, + qdev_get_gpio_in(gicdev, spi_table[i].irq)); + } + /* SNVS */ if (!sysbus_realize(SYS_BUS_DEVICE(&s->snvs), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_GIC_DIST: case FSL_IMX8MM_GIC_REDIST: case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5: + case FSL_IMX8MM_ECSPI1 ... FSL_IMX8MM_ECSPI3: case FSL_IMX8MM_I2C1 ... FSL_IMX8MM_I2C4: case FSL_IMX8MM_PCIE1: case FSL_IMX8MM_PCIE_PHY1: diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/pci-host/designware.h" #include "hw/pci-host/fsl_imx8m_phy.h" #include "hw/sd/sdhci.h" +#include "hw/ssi/imx_spi.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(FslImx8mmState, FSL_IMX8MM) enum FslImx8mmConfiguration { FSL_IMX8MM_NUM_CPUS = 4, + FSL_IMX8MM_NUM_ECSPIS = 3, FSL_IMX8MM_NUM_GPIOS = 5, FSL_IMX8MM_NUM_I2CS = 4, FSL_IMX8MM_NUM_IRQS = 128, @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMX8MPCCMState ccm; IMX8MPAnalogState analog; IMX7SNVSState snvs; + IMXSPIState spi[FSL_IMX8MM_NUM_ECSPIS]; IMXI2CState i2c[FSL_IMX8MM_NUM_I2CS]; IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_UART3_IRQ = 28, FSL_IMX8MM_UART4_IRQ = 29, + FSL_IMX8MM_ECSPI1_IRQ = 31, + FSL_IMX8MM_ECSPI2_IRQ = 32, + FSL_IMX8MM_ECSPI3_IRQ = 33, + FSL_IMX8MM_I2C1_IRQ = 35, FSL_IMX8MM_I2C2_IRQ = 36, FSL_IMX8MM_I2C3_IRQ = 37, -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> It enables emulation of WDT in iMX8MM Added WDT IRQ lines Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx8mm.c | 28 ++++++++++++++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 7 +++++++ 3 files changed, 36 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM select SDHCI select PCI_EXPRESS_DESIGNWARE select PCI_EXPRESS_FSL_IMX8M_PHY + select WDT_IMX2 config FSL_IMX8MM_EVK bool diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->spi[i], TYPE_IMX_SPI); } + for (i = 0; i < FSL_IMX8MM_NUM_WDTS; i++) { + g_autofree char *name = g_strdup_printf("wdt%d", i); + object_initialize_child(obj, name, &s->wdt[i], TYPE_IMX2_WDT); + } + object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST); object_initialize_child(obj, "pcie_phy", &s->pcie_phy, TYPE_FSL_IMX8M_PCIE_PHY); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, fsl_imx8mm_memmap[FSL_IMX8MM_SNVS_HP].addr); + /* Watchdogs */ + for (i = 0; i < FSL_IMX8MM_NUM_WDTS; i++) { + static const struct { + hwaddr addr; + unsigned int irq; + } wdog_table[FSL_IMX8MM_NUM_WDTS] = { + { fsl_imx8mm_memmap[FSL_IMX8MM_WDOG1].addr, FSL_IMX8MM_WDOG1_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_WDOG2].addr, FSL_IMX8MM_WDOG2_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_WDOG3].addr, FSL_IMX8MM_WDOG3_IRQ }, + }; + + object_property_set_bool(OBJECT(&s->wdt[i]), "pretimeout-support", + true, &error_abort); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->wdt[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[i]), 0, wdog_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->wdt[i]), 0, + qdev_get_gpio_in(gicdev, wdog_table[i].irq)); + } + /* PCIe */ if (!sysbus_realize(SYS_BUS_DEVICE(&s->pcie), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_SNVS_HP: case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4: case FSL_IMX8MM_USDHC1 ... FSL_IMX8MM_USDHC3: + case FSL_IMX8MM_WDOG1 ... FSL_IMX8MM_WDOG3: /* device implemented and treated above */ break; diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/pci-host/fsl_imx8m_phy.h" #include "hw/sd/sdhci.h" #include "hw/ssi/imx_spi.h" +#include "hw/watchdog/wdt_imx2.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ enum FslImx8mmConfiguration { FSL_IMX8MM_NUM_IRQS = 128, FSL_IMX8MM_NUM_UARTS = 4, FSL_IMX8MM_NUM_USDHCS = 3, + FSL_IMX8MM_NUM_WDTS = 3, }; struct FslImx8mmState { @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; SDHCIState usdhc[FSL_IMX8MM_NUM_USDHCS]; + IMX2WdtState wdt[FSL_IMX8MM_NUM_WDTS]; DesignwarePCIEHost pcie; FslImx8mPciePhyState pcie_phy; }; @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_GPIO5_LOW_IRQ = 72, FSL_IMX8MM_GPIO5_HIGH_IRQ = 73, + FSL_IMX8MM_WDOG1_IRQ = 78, + FSL_IMX8MM_WDOG2_IRQ = 79, + FSL_IMX8MM_WDOG3_IRQ = 10, + FSL_IMX8MM_PCI_INTA_IRQ = 122, FSL_IMX8MM_PCI_INTB_IRQ = 123, FSL_IMX8MM_PCI_INTC_IRQ = 124, -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> It enables emulation of GPT in iMX8MM Added GPT IRQ lines Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx8mm.c | 54 +++++++++++++++++++++++++++++++++++++ hw/timer/imx_gpt.c | 26 ++++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 11 ++++++++ include/hw/timer/imx_gpt.h | 2 ++ 5 files changed, 94 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM select FSL_IMX8MP_CCM select IMX select IMX_I2C + select OR_IRQ select SDHCI select PCI_EXPRESS_DESIGNWARE select PCI_EXPRESS_FSL_IMX8M_PHY diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); } + for (i = 0; i < FSL_IMX8MM_NUM_GPTS; i++) { + g_autofree char *name = g_strdup_printf("gpt%d", i + 1); + object_initialize_child(obj, name, &s->gpt[i], TYPE_IMX8MM_GPT); + } + object_initialize_child(obj, "gpt5-gpt6-irq", &s->gpt5_gpt6_irq, + TYPE_OR_IRQ); + for (i = 0; i < FSL_IMX8MM_NUM_I2CS; i++) { g_autofree char *name = g_strdup_printf("i2c%d", i + 1); object_initialize_child(obj, name, &s->i2c[i], TYPE_IMX_I2C); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr, &s->ocram); + /* GPTs */ + object_property_set_int(OBJECT(&s->gpt5_gpt6_irq), "num-lines", 2, + &error_abort); + if (!qdev_realize(DEVICE(&s->gpt5_gpt6_irq), NULL, errp)) { + return; + } + + qdev_connect_gpio_out(DEVICE(&s->gpt5_gpt6_irq), 0, + qdev_get_gpio_in(gicdev, FSL_IMX8MM_GPT5_GPT6_IRQ)); + + for (i = 0; i < FSL_IMX8MM_NUM_GPTS; i++) { + hwaddr gpt_addrs[FSL_IMX8MM_NUM_GPTS] = { + fsl_imx8mm_memmap[FSL_IMX8MM_GPT1].addr, + fsl_imx8mm_memmap[FSL_IMX8MM_GPT2].addr, + fsl_imx8mm_memmap[FSL_IMX8MM_GPT3].addr, + fsl_imx8mm_memmap[FSL_IMX8MM_GPT4].addr, + fsl_imx8mm_memmap[FSL_IMX8MM_GPT5].addr, + fsl_imx8mm_memmap[FSL_IMX8MM_GPT6].addr, + }; + + s->gpt[i].ccm = IMX_CCM(&s->ccm); + + if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpt[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpt[i]), 0, gpt_addrs[i]); + + if (i < FSL_IMX8MM_NUM_GPTS - 2) { + static const unsigned int gpt_irqs[FSL_IMX8MM_NUM_GPTS - 2] = { + FSL_IMX8MM_GPT1_IRQ, + FSL_IMX8MM_GPT2_IRQ, + FSL_IMX8MM_GPT3_IRQ, + FSL_IMX8MM_GPT4_IRQ, + }; + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpt[i]), 0, + qdev_get_gpio_in(gicdev, gpt_irqs[i])); + } else { + int irq = i - FSL_IMX8MM_NUM_GPTS + 2; + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpt[i]), 0, + qdev_get_gpio_in(DEVICE(&s->gpt5_gpt6_irq), irq)); + } + } + /* I2Cs */ for (i = 0; i < FSL_IMX8MM_NUM_I2CS; i++) { static const struct { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_GIC_DIST: case FSL_IMX8MM_GIC_REDIST: case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5: + case FSL_IMX8MM_GPT1 ... FSL_IMX8MM_GPT6: case FSL_IMX8MM_ECSPI1 ... FSL_IMX8MM_ECSPI3: case FSL_IMX8MM_I2C1 ... FSL_IMX8MM_I2C4: case FSL_IMX8MM_PCIE1: diff --git a/hw/timer/imx_gpt.c b/hw/timer/imx_gpt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/imx_gpt.c +++ b/hw/timer/imx_gpt.c @@ -XXX,XX +XXX,XX @@ * Originally written by Hans Jiang * Updated by Peter Chubb * Updated by Jean-Christophe Dubois <jcd@tribudubois.net> + * Updated by Gaurav Sharma <gaurav.sharma_7@nxp.com> * * This code is licensed under GPL version 2 or later. See * the COPYING file in the top-level directory. @@ -XXX,XX +XXX,XX @@ static const IMXClk imx8mp_gpt_clocks[] = { CLK_NONE, /* 111 not defined */ }; +static const IMXClk imx8mm_gpt_clocks[] = { + CLK_NONE, /* 000 No clock source */ + CLK_IPG, /* 001 ipg_clk, 532MHz */ + CLK_IPG_HIGH, /* 010 ipg_clk_highfreq */ + CLK_EXT, /* 011 External clock */ + CLK_32k, /* 100 ipg_clk_32k */ + CLK_HIGH, /* 101 ipg_clk_16M */ + CLK_NONE, /* 110 not defined */ + CLK_NONE, /* 111 not defined */ +}; + /* Must be called from within ptimer_transaction_begin/commit block */ static void imx_gpt_set_freq(IMXGPTState *s) { @@ -XXX,XX +XXX,XX @@ static void imx8mp_gpt_init(Object *obj) s->clocks = imx8mp_gpt_clocks; } +static void imx8mm_gpt_init(Object *obj) +{ + IMXGPTState *s = IMX_GPT(obj); + + s->clocks = imx8mm_gpt_clocks; +} + static const TypeInfo imx25_gpt_info = { .name = TYPE_IMX25_GPT, .parent = TYPE_SYS_BUS_DEVICE, @@ -XXX,XX +XXX,XX @@ static const TypeInfo imx8mp_gpt_info = { .instance_init = imx8mp_gpt_init, }; +static const TypeInfo imx8mm_gpt_info = { + .name = TYPE_IMX8MM_GPT, + .parent = TYPE_IMX25_GPT, + .instance_init = imx8mm_gpt_init, +}; + static void imx_gpt_register_types(void) { type_register_static(&imx25_gpt_info); @@ -XXX,XX +XXX,XX @@ static void imx_gpt_register_types(void) type_register_static(&imx6ul_gpt_info); type_register_static(&imx7_gpt_info); type_register_static(&imx8mp_gpt_info); + type_register_static(&imx8mm_gpt_info); } type_init(imx_gpt_register_types) diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx8mp_analog.h" #include "hw/misc/imx8mp_ccm.h" +#include "hw/or-irq.h" #include "hw/pci-host/designware.h" #include "hw/pci-host/fsl_imx8m_phy.h" #include "hw/sd/sdhci.h" #include "hw/ssi/imx_spi.h" +#include "hw/timer/imx_gpt.h" #include "hw/watchdog/wdt_imx2.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ enum FslImx8mmConfiguration { FSL_IMX8MM_NUM_CPUS = 4, FSL_IMX8MM_NUM_ECSPIS = 3, FSL_IMX8MM_NUM_GPIOS = 5, + FSL_IMX8MM_NUM_GPTS = 6, FSL_IMX8MM_NUM_I2CS = 4, FSL_IMX8MM_NUM_IRQS = 128, FSL_IMX8MM_NUM_UARTS = 4, @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { ARMCPU cpu[FSL_IMX8MM_NUM_CPUS]; GICv3State gic; + IMXGPTState gpt[FSL_IMX8MM_NUM_GPTS]; IMXGPIOState gpio[FSL_IMX8MM_NUM_GPIOS]; IMX8MPCCMState ccm; IMX8MPAnalogState analog; @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMX2WdtState wdt[FSL_IMX8MM_NUM_WDTS]; DesignwarePCIEHost pcie; FslImx8mPciePhyState pcie_phy; + OrIRQState gpt5_gpt6_irq; }; enum FslImx8mmMemoryRegions { @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_I2C3_IRQ = 37, FSL_IMX8MM_I2C4_IRQ = 38, + FSL_IMX8MM_GPT1_IRQ = 55, + FSL_IMX8MM_GPT2_IRQ = 54, + FSL_IMX8MM_GPT3_IRQ = 53, + FSL_IMX8MM_GPT4_IRQ = 52, + FSL_IMX8MM_GPT5_GPT6_IRQ = 51, + FSL_IMX8MM_GPIO1_LOW_IRQ = 64, FSL_IMX8MM_GPIO1_HIGH_IRQ = 65, FSL_IMX8MM_GPIO2_LOW_IRQ = 66, diff --git a/include/hw/timer/imx_gpt.h b/include/hw/timer/imx_gpt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/imx_gpt.h +++ b/include/hw/timer/imx_gpt.h @@ -XXX,XX +XXX,XX @@ * Originally written by Hans Jiang * Updated by Peter Chubb * Updated by Jean-Christophe Dubois <jcd@tribudubois.net> + * Updated by Gaurav Sharma <gaurav.sharma_7@nxp.com> * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal @@ -XXX,XX +XXX,XX @@ #define TYPE_IMX6UL_GPT "imx6ul.gpt" #define TYPE_IMX7_GPT "imx7.gpt" #define TYPE_IMX8MP_GPT "imx8mp.gpt" +#define TYPE_IMX8MM_GPT "imx8mm.gpt" #define TYPE_IMX_GPT TYPE_IMX25_GPT -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> It enables emulation of ENET ethernet controller in iMX8MM Enables testing and debugging of network dependent drivers Added ENET MAC IRQ lines Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx8mm.c | 24 ++++++++++++++++++++++++ hw/arm/imx8mm-evk.c | 1 + include/hw/arm/fsl-imx8mm.h | 10 +++++++++- 4 files changed, 35 insertions(+), 1 deletion(-) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM select FSL_IMX8MP_ANALOG select FSL_IMX8MP_CCM select IMX + select IMX_FEC select IMX_I2C select OR_IRQ select SDHCI diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->wdt[i], TYPE_IMX2_WDT); } + object_initialize_child(obj, "eth0", &s->enet, TYPE_IMX_ENET); + object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST); object_initialize_child(obj, "pcie_phy", &s->pcie_phy, TYPE_FSL_IMX8M_PCIE_PHY); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) qdev_get_gpio_in(gicdev, spi_table[i].irq)); } + /* ENET1 */ + object_property_set_uint(OBJECT(&s->enet), "phy-num", s->phy_num, + &error_abort); + object_property_set_uint(OBJECT(&s->enet), "tx-ring-num", 3, &error_abort); + qemu_configure_nic_device(DEVICE(&s->enet), true, NULL); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->enet), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->enet), 0, + fsl_imx8mm_memmap[FSL_IMX8MM_ENET1].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->enet), 0, + qdev_get_gpio_in(gicdev, FSL_IMX8MM_ENET1_MAC_IRQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->enet), 1, + qdev_get_gpio_in(gicdev, FSL_IMX6_ENET1_MAC_1588_IRQ)); + /* SNVS */ if (!sysbus_realize(SYS_BUS_DEVICE(&s->snvs), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5: case FSL_IMX8MM_GPT1 ... FSL_IMX8MM_GPT6: case FSL_IMX8MM_ECSPI1 ... FSL_IMX8MM_ECSPI3: + case FSL_IMX8MM_ENET1: case FSL_IMX8MM_I2C1 ... FSL_IMX8MM_I2C4: case FSL_IMX8MM_PCIE1: case FSL_IMX8MM_PCIE_PHY1: @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) } } +static const Property fsl_imx8mm_properties[] = { + DEFINE_PROP_UINT32("fec1-phy-num", FslImx8mmState, phy_num, 0), + DEFINE_PROP_BOOL("fec1-phy-connected", FslImx8mmState, phy_connected, true), +}; + static void fsl_imx8mm_class_init(ObjectClass *oc, const void *data) { DeviceClass *dc = DEVICE_CLASS(oc); + device_class_set_props(dc, fsl_imx8mm_properties); dc->realize = fsl_imx8mm_realize; dc->desc = "i.MX 8MM SoC"; diff --git a/hw/arm/imx8mm-evk.c b/hw/arm/imx8mm-evk.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/imx8mm-evk.c +++ b/hw/arm/imx8mm-evk.c @@ -XXX,XX +XXX,XX @@ static void imx8mm_evk_init(MachineState *machine) s = FSL_IMX8MM(object_new_with_props(TYPE_FSL_IMX8MM, OBJECT(machine), "soc", &error_fatal, NULL)); + object_property_set_uint(OBJECT(s), "fec1-phy-num", 1, &error_fatal); sysbus_realize_and_unref(SYS_BUS_DEVICE(s), &error_fatal); memory_region_add_subregion(get_system_memory(), FSL_IMX8MM_RAM_START, diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx8mp_analog.h" #include "hw/misc/imx8mp_ccm.h" -#include "hw/or-irq.h" +#include "hw/net/imx_fec.h" +#include "hw/core/or-irq.h" #include "hw/pci-host/designware.h" #include "hw/pci-host/fsl_imx8m_phy.h" #include "hw/sd/sdhci.h" @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMXI2CState i2c[FSL_IMX8MM_NUM_I2CS]; IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; + IMXFECState enet; SDHCIState usdhc[FSL_IMX8MM_NUM_USDHCS]; IMX2WdtState wdt[FSL_IMX8MM_NUM_WDTS]; DesignwarePCIEHost pcie; FslImx8mPciePhyState pcie_phy; OrIRQState gpt5_gpt6_irq; + + uint32_t phy_num; + bool phy_connected; }; enum FslImx8mmMemoryRegions { @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_WDOG2_IRQ = 79, FSL_IMX8MM_WDOG3_IRQ = 10, + FSL_IMX8MM_ENET1_MAC_IRQ = 118, + FSL_IMX6_ENET1_MAC_1588_IRQ = 121, + FSL_IMX8MM_PCI_INTA_IRQ = 122, FSL_IMX8MM_PCI_INTB_IRQ = 123, FSL_IMX8MM_PCI_INTC_IRQ = 124, -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> It enables emulation of USB on iMX8MM Enables testing and debugging of USB drivers Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx8mm.c | 27 +++++++++++++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 6 ++++++ 3 files changed, 34 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM select SDHCI select PCI_EXPRESS_DESIGNWARE select PCI_EXPRESS_FSL_IMX8M_PHY + select USB_DWC3 select WDT_IMX2 config FSL_IMX8MM_EVK diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC); } + for (i = 0; i < FSL_IMX8MM_NUM_USBS; i++) { + g_autofree char *name = g_strdup_printf("usb%d", i); + object_initialize_child(obj, name, &s->usb[i], TYPE_USB_DWC3); + } + for (i = 0; i < FSL_IMX8MM_NUM_ECSPIS; i++) { g_autofree char *name = g_strdup_printf("spi%d", i + 1); object_initialize_child(obj, name, &s->spi[i], TYPE_IMX_SPI); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) qdev_get_gpio_in(gicdev, usdhc_table[i].irq)); } + /* USBs */ + for (i = 0; i < FSL_IMX8MM_NUM_USBS; i++) { + static const struct { + hwaddr addr; + unsigned int irq; + } usb_table[FSL_IMX8MM_NUM_USBS] = { + { fsl_imx8mm_memmap[FSL_IMX8MM_USB1].addr, FSL_IMX8MM_USB1_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_USB2].addr, FSL_IMX8MM_USB2_IRQ }, + }; + + qdev_prop_set_uint32(DEVICE(&s->usb[i].sysbus_xhci), "p2", 1); + qdev_prop_set_uint32(DEVICE(&s->usb[i].sysbus_xhci), "p3", 1); + qdev_prop_set_uint32(DEVICE(&s->usb[i].sysbus_xhci), "slots", 2); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->usb[i]), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->usb[i]), 0, usb_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->usb[i].sysbus_xhci), 0, + qdev_get_gpio_in(gicdev, usb_table[i].irq)); + } + /* ECSPIs */ for (i = 0; i < FSL_IMX8MM_NUM_ECSPIS; i++) { static const struct { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_OCRAM: case FSL_IMX8MM_SNVS_HP: case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4: + case FSL_IMX8MM_USB1 ... FSL_IMX8MM_USB2: case FSL_IMX8MM_USDHC1 ... FSL_IMX8MM_USDHC3: case FSL_IMX8MM_WDOG1 ... FSL_IMX8MM_WDOG3: /* device implemented and treated above */ diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/sd/sdhci.h" #include "hw/ssi/imx_spi.h" #include "hw/timer/imx_gpt.h" +#include "hw/usb/hcd-dwc3.h" #include "hw/watchdog/wdt_imx2.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ enum FslImx8mmConfiguration { FSL_IMX8MM_NUM_I2CS = 4, FSL_IMX8MM_NUM_IRQS = 128, FSL_IMX8MM_NUM_UARTS = 4, + FSL_IMX8MM_NUM_USBS = 2, FSL_IMX8MM_NUM_USDHCS = 3, FSL_IMX8MM_NUM_WDTS = 3, }; @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMXFECState enet; SDHCIState usdhc[FSL_IMX8MM_NUM_USDHCS]; IMX2WdtState wdt[FSL_IMX8MM_NUM_WDTS]; + USBDWC3 usb[FSL_IMX8MM_NUM_USBS]; DesignwarePCIEHost pcie; FslImx8mPciePhyState pcie_phy; OrIRQState gpt5_gpt6_irq; @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_I2C3_IRQ = 37, FSL_IMX8MM_I2C4_IRQ = 38, + FSL_IMX8MM_USB1_IRQ = 40, + FSL_IMX8MM_USB2_IRQ = 41, + FSL_IMX8MM_GPT1_IRQ = 55, FSL_IMX8MM_GPT2_IRQ = 54, FSL_IMX8MM_GPT3_IRQ = 53, -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> Added script that would validate the iMX8MM emulation by checking the linux console log. If it succeeds, it will return:- ok 1 test_imx8mm_evk.Imx8mmEvkMachine.test_aarch64_imx8mm_evk_usdhc Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Bernhard Beschow <shentey@gmail.com> [PMM: Add missing blank lines that flake8 wants] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 1 + tests/functional/aarch64/meson.build | 2 + tests/functional/aarch64/test_imx8mm_evk.py | 69 +++++++++++++++++++++ 3 files changed, 72 insertions(+) create mode 100755 tests/functional/aarch64/test_imx8mm_evk.py diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/arm/fsl-imx8mm.c F: hw/arm/imx8mm-evk.c F: include/hw/arm/fsl-imx8mm.h F: docs/system/arm/imx8m.rst +F: tests/functional/aarch64/test_imx8mm_evk.py MCIMX8MP-EVK / i.MX8MP M: Bernhard Beschow <shentey@gmail.com> diff --git a/tests/functional/aarch64/meson.build b/tests/functional/aarch64/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/functional/aarch64/meson.build +++ b/tests/functional/aarch64/meson.build @@ -XXX,XX +XXX,XX @@ test_aarch64_timeouts = { 'aspeed_ast2700a2' : 600, 'aspeed_ast2700fc' : 600, 'device_passthrough' : 720, + 'imx8mm_evk' : 240, 'imx8mp_evk' : 240, 'raspi4' : 480, 'reverse_debug' : 180, @@ -XXX,XX +XXX,XX @@ tests_aarch64_system_thorough = [ 'aspeed_ast2700fc', 'device_passthrough', 'hotplug_pci', + 'imx8mm_evk', 'imx8mp_evk', 'kvm', 'multiprocess', diff --git a/tests/functional/aarch64/test_imx8mm_evk.py b/tests/functional/aarch64/test_imx8mm_evk.py new file mode 100755 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/functional/aarch64/test_imx8mm_evk.py @@ -XXX,XX +XXX,XX @@ +#!/usr/bin/env python3 +# +# Functional test that boots a Linux kernel and checks the console +# +# SPDX-License-Identifier: GPL-2.0-or-later + +from qemu_test import LinuxKernelTest, Asset + + +class Imx8mmEvkMachine(LinuxKernelTest): + + ASSET_IMAGE = Asset( + ('https://cloud.debian.org/images/cloud/bookworm/20231210-1590/' + 'debian-12-generic-arm64-20231210-1590.tar.xz'), + '7ebf1577b32d5af6204df74b54ca2e4675de9b5a9fa14f3ff70b88eeb7b3b359') + + KERNEL_OFFSET = 0x51000000 + KERNEL_SIZE = 32622528 + INITRD_OFFSET = 0x76000000 + INITRD_SIZE = 30987766 + DTB_OFFSET = 0x64DB5000 + DTB_SIZE = 36812 + + def extract(self, in_path, out_path, offset, size): + try: + with open(in_path, "rb") as source: + source.seek(offset) + data = source.read(size) + with open(out_path, "wb") as target: + target.write(data) + except (IOError, ValueError) as e: + self.log.error(f"Failed to extract {out_path}: {e}") + raise + + def setUp(self): + super().setUp() + + self.image_path = self.scratch_file("disk.raw") + self.kernel_path = self.scratch_file("linux") + self.initrd_path = self.scratch_file("initrd.zstd") + self.dtb_path = self.scratch_file("imx8mm-evk.dtb") + + self.archive_extract(self.ASSET_IMAGE) + self.extract(self.image_path, self.kernel_path, + self.KERNEL_OFFSET, self.KERNEL_SIZE) + self.extract(self.image_path, self.initrd_path, + self.INITRD_OFFSET, self.INITRD_SIZE) + self.extract(self.image_path, self.dtb_path, + self.DTB_OFFSET, self.DTB_SIZE) + + def test_aarch64_imx8mm_evk_usdhc(self): + self.require_accelerator("tcg") + self.set_machine('imx8mm-evk') + self.vm.set_console(console_index=1) + self.vm.add_args('-m', '2G', + '-smp', '4', + '-kernel', self.kernel_path, + '-initrd', self.initrd_path, + '-dtb', self.dtb_path, + '-append', 'root=/dev/mmcblk2p1', + '-drive', f'file={self.image_path},if=sd,bus=2,' + 'format=raw,id=mmcblk2,snapshot=on') + + self.vm.launch() + self.wait_for_console_pattern('Welcome to ') + + +if __name__ == '__main__': + LinuxKernelTest.main() -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> As mentioned by Richard in [*]: We don't actually need any specific endianness here, because every byte has the same value. So we could simply drop MO_TE. That would produce a store in host-endianness, which will be fractionally more efficient on some hosts. [*] https://lore.kernel.org/qemu-devel/d64d3576-9188-4e74-afdc-3492c9feb8e0@linaro.org/ Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20260414005348.4767-2-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/helper-a64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/tcg/helper-a64.c b/target/arm/tcg/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/helper-a64.c +++ b/target/arm/tcg/helper-a64.c @@ -XXX,XX +XXX,XX @@ static uint64_t set_step_tags(CPUARMState *env, uint64_t toaddr, * the page dirty and will use the fast path. */ uint64_t repldata = data * 0x0101010101010101ULL; - MemOpIdx oi16 = make_memop_idx(MO_TE | MO_128, memidx); + MemOpIdx oi16 = make_memop_idx(MO_128, memidx); cpu_st16_mmu(env, toaddr, int128_make128(repldata, repldata), oi16, ra); mte_mops_set_tags(env, toaddr, 16, *mtedesc); return 16; -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Extract the implicit MO_TE definition in order to replace it in the next commit. Mechanical change using: $ for n in UW UL UQ UO SW SL SQ; do \ sed -i -e "s/MO_TE$n/MO_TE | MO_$n/" \ $(git grep -l MO_TE$n target/arm); \ done Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-3-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/m_helper.c | 6 +-- target/arm/tcg/mve_helper.c | 79 ++++++++++++++++++++----------------- 2 files changed, 45 insertions(+), 40 deletions(-) diff --git a/target/arm/tcg/m_helper.c b/target/arm/tcg/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/m_helper.c +++ b/target/arm/tcg/m_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest) /* Note that these stores can throw exceptions on MPU faults */ ARMMMUIdx mmu_idx = arm_mmu_idx(env); - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, arm_to_core_mmu_idx(mmu_idx)); cpu_stl_mmu(env, sp, nextinst, oi, GETPC()); cpu_stl_mmu(env, sp + 4, saved_psr, oi, GETPC()); @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) bool lspact = env->v7m.fpccr[s] & R_V7M_FPCCR_LSPACT_MASK; uintptr_t ra = GETPC(); ARMMMUIdx mmu_idx = arm_mmu_idx(env); - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, arm_to_core_mmu_idx(mmu_idx)); assert(env->v7m.secure); @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlldm)(CPUARMState *env, uint32_t fptr) ARMCPU *cpu = env_archcpu(env); uintptr_t ra = GETPC(); ARMMMUIdx mmu_idx = arm_mmu_idx(env); - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, arm_to_core_mmu_idx(mmu_idx)); /* fptr is the value of Rn, the frame pointer we load the FP regs from */ diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mve_helper.c +++ b/target/arm/tcg/mve_helper.c @@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env) } DO_VLDR(vldrb, MO_UB, 1, uint8_t, ldb, 1, uint8_t) -DO_VLDR(vldrh, MO_TEUW, 2, uint16_t, ldw, 2, uint16_t) -DO_VLDR(vldrw, MO_TEUL, 4, uint32_t, ldl, 4, uint32_t) +DO_VLDR(vldrh, MO_TE | MO_UW, 2, uint16_t, ldw, 2, uint16_t) +DO_VLDR(vldrw, MO_TE | MO_UL, 4, uint32_t, ldl, 4, uint32_t) DO_VSTR(vstrb, MO_UB, 1, stb, 1, uint8_t) -DO_VSTR(vstrh, MO_TEUW, 2, stw, 2, uint16_t) -DO_VSTR(vstrw, MO_TEUL, 4, stl, 4, uint32_t) +DO_VSTR(vstrh, MO_TE | MO_UW, 2, stw, 2, uint16_t) +DO_VSTR(vstrw, MO_TE | MO_UL, 4, stl, 4, uint32_t) DO_VLDR(vldrb_sh, MO_SB, 1, int8_t, ldb, 2, int16_t) DO_VLDR(vldrb_sw, MO_SB, 1, int8_t, ldb, 4, int32_t) DO_VLDR(vldrb_uh, MO_UB, 1, uint8_t, ldb, 2, uint16_t) DO_VLDR(vldrb_uw, MO_UB, 1, uint8_t, ldb, 4, uint32_t) -DO_VLDR(vldrh_sw, MO_TESW, 2, int16_t, ldw, 4, int32_t) -DO_VLDR(vldrh_uw, MO_TEUW, 2, uint16_t, ldw, 4, uint32_t) +DO_VLDR(vldrh_sw, MO_TE | MO_SW, 2, int16_t, ldw, 4, int32_t) +DO_VLDR(vldrh_uw, MO_TE | MO_UW, 2, uint16_t, ldw, 4, uint32_t) DO_VSTR(vstrb_h, MO_UB, 1, stb, 2, int16_t) DO_VSTR(vstrb_w, MO_UB, 1, stb, 4, int32_t) -DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t) +DO_VSTR(vstrh_w, MO_TE | MO_UW, 2, stw, 4, int32_t) #undef DO_VLDR #undef DO_VSTR @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (e = 0; e < 16 / 4; e++, mask >>= 4, eci_mask >>= 4) { \ if (!(eci_mask & 1)) { \ continue; \ @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (e = 0; e < 16 / 4; e++, mask >>= 4, eci_mask >>= 4) { \ if (!(eci_mask & 1)) { \ continue; \ @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t) DO_VLDR_SG(vldrb_sg_sh, MO_SB, int8_t, ldb, 2, int16_t, uint16_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_sw, MO_SB, int8_t, ldb, 4, int32_t, uint32_t, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_sw, MO_TESW, int16_t, ldw, 4, int32_t, uint32_t, ADDR_ADD, false) +DO_VLDR_SG(vldrh_sg_sw, MO_TE | MO_SW, int16_t, ldw, 4, + int32_t, uint32_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_ub, MO_UB, uint8_t, ldb, 1, uint8_t, uint8_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_uh, MO_UB, uint8_t, ldb, 2, uint16_t, uint16_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_uw, MO_UB, uint8_t, ldb, 4, uint32_t, uint32_t, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_uh, MO_TEUW, uint16_t, ldw, 2, uint16_t, uint16_t, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_uw, MO_TEUW, uint16_t, ldw, 4, uint32_t, uint32_t, ADDR_ADD, false) -DO_VLDR_SG(vldrw_sg_uw, MO_TEUL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD, false) +DO_VLDR_SG(vldrh_sg_uh, MO_TE | MO_UW, uint16_t, ldw, 2, + uint16_t, uint16_t, ADDR_ADD, false) +DO_VLDR_SG(vldrh_sg_uw, MO_TE | MO_UW, uint16_t, ldw, 4, + uint32_t, uint32_t, ADDR_ADD, false) +DO_VLDR_SG(vldrw_sg_uw, MO_TE | MO_UL, uint32_t, ldl, 4, + uint32_t, uint32_t, ADDR_ADD, false) DO_VLDR64_SG(vldrd_sg_ud, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_os_sw, MO_TESW, int16_t, ldw, 4, +DO_VLDR_SG(vldrh_sg_os_sw, MO_TE | MO_SW, int16_t, ldw, 4, int32_t, uint32_t, ADDR_ADD_OSH, false) -DO_VLDR_SG(vldrh_sg_os_uh, MO_TEUW, uint16_t, ldw, 2, +DO_VLDR_SG(vldrh_sg_os_uh, MO_TE | MO_UW, uint16_t, ldw, 2, uint16_t, uint16_t, ADDR_ADD_OSH, false) -DO_VLDR_SG(vldrh_sg_os_uw, MO_TEUW, uint16_t, ldw, 4, +DO_VLDR_SG(vldrh_sg_os_uw, MO_TE | MO_UW, uint16_t, ldw, 4, uint32_t, uint32_t, ADDR_ADD_OSH, false) -DO_VLDR_SG(vldrw_sg_os_uw, MO_TEUL, uint32_t, ldl, 4, +DO_VLDR_SG(vldrw_sg_os_uw, MO_TE | MO_UL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD_OSW, false) DO_VLDR64_SG(vldrd_sg_os_ud, ADDR_ADD_OSD, false) DO_VSTR_SG(vstrb_sg_ub, MO_UB, stb, 1, uint8_t, ADDR_ADD, false) DO_VSTR_SG(vstrb_sg_uh, MO_UB, stb, 2, uint16_t, ADDR_ADD, false) DO_VSTR_SG(vstrb_sg_uw, MO_UB, stb, 4, uint32_t, ADDR_ADD, false) -DO_VSTR_SG(vstrh_sg_uh, MO_TEUW, stw, 2, uint16_t, ADDR_ADD, false) -DO_VSTR_SG(vstrh_sg_uw, MO_TEUW, stw, 4, uint32_t, ADDR_ADD, false) -DO_VSTR_SG(vstrw_sg_uw, MO_TEUL, stl, 4, uint32_t, ADDR_ADD, false) +DO_VSTR_SG(vstrh_sg_uh, MO_TE | MO_UW, stw, 2, uint16_t, ADDR_ADD, false) +DO_VSTR_SG(vstrh_sg_uw, MO_TE | MO_UW, stw, 4, uint32_t, ADDR_ADD, false) +DO_VSTR_SG(vstrw_sg_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD, false) DO_VSTR64_SG(vstrd_sg_ud, ADDR_ADD, false) -DO_VSTR_SG(vstrh_sg_os_uh, MO_TEUW, stw, 2, uint16_t, ADDR_ADD_OSH, false) -DO_VSTR_SG(vstrh_sg_os_uw, MO_TEUW, stw, 4, uint32_t, ADDR_ADD_OSH, false) -DO_VSTR_SG(vstrw_sg_os_uw, MO_TEUL, stl, 4, uint32_t, ADDR_ADD_OSW, false) +DO_VSTR_SG(vstrh_sg_os_uh, MO_TE | MO_UW, stw, 2, uint16_t, ADDR_ADD_OSH, false) +DO_VSTR_SG(vstrh_sg_os_uw, MO_TE | MO_UW, stw, 4, uint32_t, ADDR_ADD_OSH, false) +DO_VSTR_SG(vstrw_sg_os_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD_OSW, false) DO_VSTR64_SG(vstrd_sg_os_ud, ADDR_ADD_OSD, false) -DO_VLDR_SG(vldrw_sg_wb_uw, MO_TEUL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD, true) +DO_VLDR_SG(vldrw_sg_wb_uw, MO_TE | MO_UL, uint32_t, ldl, 4, + uint32_t, uint32_t, ADDR_ADD, true) DO_VLDR64_SG(vldrd_sg_wb_ud, ADDR_ADD, true) -DO_VSTR_SG(vstrw_sg_wb_uw, MO_TEUL, stl, 4, uint32_t, ADDR_ADD, true) +DO_VSTR_SG(vstrw_sg_wb_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD, true) DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) /* @@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) static const uint8_t off[4] = { O1, O2, O3, O4 }; \ uint32_t addr, data; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) int y; /* y counts 0 2 0 2 */ \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0, y = 0; beat < 4; beat++, mask >>= 4, y ^= 2) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) uint32_t *qd; \ int y; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9) uint32_t addr, data; \ uint8_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9) int e; \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9) uint32_t addr, data; \ uint32_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20) static const uint8_t off[4] = { O1, O2, O3, O4 }; \ uint32_t addr, data; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20) int y; /* y counts 0 2 0 2 */ \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0, y = 0; beat < 4; beat++, mask >>= 4, y ^= 2) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20) uint32_t *qd; \ int y; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9) uint32_t addr, data; \ uint8_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9) int e; \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9) uint32_t addr, data; \ uint32_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-4-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/mve_helper.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mve_helper.c +++ b/target/arm/tcg/mve_helper.c @@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env) uint16_t eci_mask = mve_eci_mask(env); \ unsigned b, e; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MFLAG | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + mmu_idx); \ /* \ * R_SXTM allows the dest reg to become UNKNOWN for abandoned \ * beats so we don't care if we update part of the dest and \ @@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env) uint16_t mask = mve_element_mask(env); \ unsigned b, e; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MFLAG | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + mmu_idx); \ for (b = 0, e = 0; b < 16; b += ESIZE, e++) { \ if (mask & (1 << b)) { \ cpu_##STTYPE##_mmu(env, addr, d[H##ESIZE(e)], oi, GETPC()); \ @@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env) } DO_VLDR(vldrb, MO_UB, 1, uint8_t, ldb, 1, uint8_t) -DO_VLDR(vldrh, MO_TE | MO_UW, 2, uint16_t, ldw, 2, uint16_t) -DO_VLDR(vldrw, MO_TE | MO_UL, 4, uint32_t, ldl, 4, uint32_t) +DO_VLDR(vldrh, MO_UW, 2, uint16_t, ldw, 2, uint16_t) +DO_VLDR(vldrw, MO_UL, 4, uint32_t, ldl, 4, uint32_t) DO_VSTR(vstrb, MO_UB, 1, stb, 1, uint8_t) -DO_VSTR(vstrh, MO_TE | MO_UW, 2, stw, 2, uint16_t) -DO_VSTR(vstrw, MO_TE | MO_UL, 4, stl, 4, uint32_t) +DO_VSTR(vstrh, MO_UW, 2, stw, 2, uint16_t) +DO_VSTR(vstrw, MO_UL, 4, stl, 4, uint32_t) DO_VLDR(vldrb_sh, MO_SB, 1, int8_t, ldb, 2, int16_t) DO_VLDR(vldrb_sw, MO_SB, 1, int8_t, ldb, 4, int32_t) DO_VLDR(vldrb_uh, MO_UB, 1, uint8_t, ldb, 2, uint16_t) DO_VLDR(vldrb_uw, MO_UB, 1, uint8_t, ldb, 4, uint32_t) -DO_VLDR(vldrh_sw, MO_TE | MO_SW, 2, int16_t, ldw, 4, int32_t) -DO_VLDR(vldrh_uw, MO_TE | MO_UW, 2, uint16_t, ldw, 4, uint32_t) +DO_VLDR(vldrh_sw, MO_SW, 2, int16_t, ldw, 4, int32_t) +DO_VLDR(vldrh_uw, MO_UW, 2, uint16_t, ldw, 4, uint32_t) DO_VSTR(vstrb_h, MO_UB, 1, stb, 2, int16_t) DO_VSTR(vstrb_w, MO_UB, 1, stb, 4, int32_t) -DO_VSTR(vstrh_w, MO_TE | MO_UW, 2, stw, 4, int32_t) +DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) #undef DO_VLDR #undef DO_VSTR -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-5-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/mve_helper.c | 43 +++++++++++++++++-------------------- 1 file changed, 20 insertions(+), 23 deletions(-) diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mve_helper.c +++ b/target/arm/tcg/mve_helper.c @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MFLAG | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + mmu_idx); \ for (e = 0; e < 16 / ESIZE; e++, mask >>= ESIZE, eci_mask >>= ESIZE) { \ if (!(eci_mask & 1)) { \ continue; \ @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MFLAG | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + mmu_idx); \ for (e = 0; e < 16 / ESIZE; e++, mask >>= ESIZE, eci_mask >>= ESIZE) { \ if (!(eci_mask & 1)) { \ continue; \ @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) DO_VLDR_SG(vldrb_sg_sh, MO_SB, int8_t, ldb, 2, int16_t, uint16_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_sw, MO_SB, int8_t, ldb, 4, int32_t, uint32_t, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_sw, MO_TE | MO_SW, int16_t, ldw, 4, - int32_t, uint32_t, ADDR_ADD, false) +DO_VLDR_SG(vldrh_sg_sw, MO_SW, int16_t, ldw, 4, int32_t, uint32_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_ub, MO_UB, uint8_t, ldb, 1, uint8_t, uint8_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_uh, MO_UB, uint8_t, ldb, 2, uint16_t, uint16_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_uw, MO_UB, uint8_t, ldb, 4, uint32_t, uint32_t, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_uh, MO_TE | MO_UW, uint16_t, ldw, 2, - uint16_t, uint16_t, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_uw, MO_TE | MO_UW, uint16_t, ldw, 4, - uint32_t, uint32_t, ADDR_ADD, false) -DO_VLDR_SG(vldrw_sg_uw, MO_TE | MO_UL, uint32_t, ldl, 4, - uint32_t, uint32_t, ADDR_ADD, false) +DO_VLDR_SG(vldrh_sg_uh, MO_UW, uint16_t, ldw, 2, uint16_t, uint16_t, ADDR_ADD, false) +DO_VLDR_SG(vldrh_sg_uw, MO_UW, uint16_t, ldw, 4, uint32_t, uint32_t, ADDR_ADD, false) +DO_VLDR_SG(vldrw_sg_uw, MO_UL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD, false) DO_VLDR64_SG(vldrd_sg_ud, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_os_sw, MO_TE | MO_SW, int16_t, ldw, 4, +DO_VLDR_SG(vldrh_sg_os_sw, MO_SW, int16_t, ldw, 4, int32_t, uint32_t, ADDR_ADD_OSH, false) -DO_VLDR_SG(vldrh_sg_os_uh, MO_TE | MO_UW, uint16_t, ldw, 2, +DO_VLDR_SG(vldrh_sg_os_uh, MO_UW, uint16_t, ldw, 2, uint16_t, uint16_t, ADDR_ADD_OSH, false) -DO_VLDR_SG(vldrh_sg_os_uw, MO_TE | MO_UW, uint16_t, ldw, 4, +DO_VLDR_SG(vldrh_sg_os_uw, MO_UW, uint16_t, ldw, 4, uint32_t, uint32_t, ADDR_ADD_OSH, false) -DO_VLDR_SG(vldrw_sg_os_uw, MO_TE | MO_UL, uint32_t, ldl, 4, +DO_VLDR_SG(vldrw_sg_os_uw, MO_UL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD_OSW, false) DO_VLDR64_SG(vldrd_sg_os_ud, ADDR_ADD_OSD, false) DO_VSTR_SG(vstrb_sg_ub, MO_UB, stb, 1, uint8_t, ADDR_ADD, false) DO_VSTR_SG(vstrb_sg_uh, MO_UB, stb, 2, uint16_t, ADDR_ADD, false) DO_VSTR_SG(vstrb_sg_uw, MO_UB, stb, 4, uint32_t, ADDR_ADD, false) -DO_VSTR_SG(vstrh_sg_uh, MO_TE | MO_UW, stw, 2, uint16_t, ADDR_ADD, false) -DO_VSTR_SG(vstrh_sg_uw, MO_TE | MO_UW, stw, 4, uint32_t, ADDR_ADD, false) -DO_VSTR_SG(vstrw_sg_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD, false) +DO_VSTR_SG(vstrh_sg_uh, MO_UW, stw, 2, uint16_t, ADDR_ADD, false) +DO_VSTR_SG(vstrh_sg_uw, MO_UW, stw, 4, uint32_t, ADDR_ADD, false) +DO_VSTR_SG(vstrw_sg_uw, MO_UL, stl, 4, uint32_t, ADDR_ADD, false) DO_VSTR64_SG(vstrd_sg_ud, ADDR_ADD, false) -DO_VSTR_SG(vstrh_sg_os_uh, MO_TE | MO_UW, stw, 2, uint16_t, ADDR_ADD_OSH, false) -DO_VSTR_SG(vstrh_sg_os_uw, MO_TE | MO_UW, stw, 4, uint32_t, ADDR_ADD_OSH, false) -DO_VSTR_SG(vstrw_sg_os_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD_OSW, false) +DO_VSTR_SG(vstrh_sg_os_uh, MO_UW, stw, 2, uint16_t, ADDR_ADD_OSH, false) +DO_VSTR_SG(vstrh_sg_os_uw, MO_UW, stw, 4, uint32_t, ADDR_ADD_OSH, false) +DO_VSTR_SG(vstrw_sg_os_uw, MO_UL, stl, 4, uint32_t, ADDR_ADD_OSW, false) DO_VSTR64_SG(vstrd_sg_os_ud, ADDR_ADD_OSD, false) -DO_VLDR_SG(vldrw_sg_wb_uw, MO_TE | MO_UL, uint32_t, ldl, 4, - uint32_t, uint32_t, ADDR_ADD, true) +DO_VLDR_SG(vldrw_sg_wb_uw, MO_UL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD, true) DO_VLDR64_SG(vldrd_sg_wb_ud, ADDR_ADD, true) -DO_VSTR_SG(vstrw_sg_wb_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD, true) +DO_VSTR_SG(vstrw_sg_wb_uw, MO_UL, stl, 4, uint32_t, ADDR_ADD, true) DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) /* -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-6-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 6 ++++++ target/arm/tcg/mve_helper.c | 3 ++- 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ #include "exec/hwaddr.h" #include "exec/vaddr.h" #include "exec/breakpoint.h" +#include "exec/memop.h" #include "accel/tcg/tb-cpu-state.h" #include "hw/core/registerfields.h" #include "tcg/tcg-gvec-desc.h" @@ -XXX,XX +XXX,XX @@ #define BANK_HYP 6 #define BANK_MON 7 +static inline MemOp mo_endian(CPUARMState *env) +{ + return EX_TBFLAG_ANY(env->hflags, BE_DATA) ? MO_BE : MO_LE; +} + static inline int arm_env_mmu_index(CPUARMState *env) { return EX_TBFLAG_ANY(env->hflags, MMUIDX); diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mve_helper.c +++ b/target/arm/tcg/mve_helper.c @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (e = 0; e < 16 / 4; e++, mask >>= 4, eci_mask >>= 4) { \ if (!(eci_mask & 1)) { \ continue; \ -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-7-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/mve_helper.c | 47 +++++++++++++++++++++++-------------- 1 file changed, 30 insertions(+), 17 deletions(-) diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mve_helper.c +++ b/target/arm/tcg/mve_helper.c @@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env) uint16_t eci_mask = mve_eci_mask(env); \ unsigned b, e; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MFLAG | MO_ALIGN, \ mmu_idx); \ /* \ * R_SXTM allows the dest reg to become UNKNOWN for abandoned \ @@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env) uint16_t mask = mve_element_mask(env); \ unsigned b, e; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MFLAG | MO_ALIGN, \ mmu_idx); \ for (b = 0, e = 0; b < 16; b += ESIZE, e++) { \ if (mask & (1 << b)) { \ @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MFLAG | MO_ALIGN, \ mmu_idx); \ for (e = 0; e < 16 / ESIZE; e++, mask >>= ESIZE, eci_mask >>= ESIZE) { \ if (!(eci_mask & 1)) { \ @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MFLAG | MO_ALIGN, \ mmu_idx); \ for (e = 0; e < 16 / ESIZE; e++, mask >>= ESIZE, eci_mask >>= ESIZE) { \ if (!(eci_mask & 1)) { \ @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (e = 0; e < 16 / 4; e++, mask >>= 4, eci_mask >>= 4) { \ if (!(eci_mask & 1)) { \ continue; \ @@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) static const uint8_t off[4] = { O1, O2, O3, O4 }; \ uint32_t addr, data; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) int y; /* y counts 0 2 0 2 */ \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0, y = 0; beat < 4; beat++, mask >>= 4, y ^= 2) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) uint32_t *qd; \ int y; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9) uint32_t addr, data; \ uint8_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9) int e; \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9) uint32_t addr, data; \ uint32_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20) static const uint8_t off[4] = { O1, O2, O3, O4 }; \ uint32_t addr, data; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20) int y; /* y counts 0 2 0 2 */ \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0, y = 0; beat < 4; beat++, mask >>= 4, y ^= 2) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20) uint32_t *qd; \ int y; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9) uint32_t addr, data; \ uint8_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9) int e; \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9) uint32_t addr, data; \ uint32_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-8-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/meson.build | 3 ++- target/arm/tcg/mve_helper.c | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/target/arm/tcg/meson.build b/target/arm/tcg/meson.build index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/meson.build +++ b/target/arm/tcg/meson.build @@ -XXX,XX +XXX,XX @@ arm_ss.add(when: 'TARGET_AARCH64', if_false: files('stubs32.c')) arm_ss.add(files( 'cpu32.c', 'm_helper.c', - 'mve_helper.c', )) arm_ss.add(when: 'TARGET_AARCH64', if_true: files( @@ -XXX,XX +XXX,XX @@ arm_common_system_ss.add( 'debug.c', 'hflags.c', 'gengvec.c', + 'mve_helper.c', 'neon_helper.c', 'op_helper.c', 'psci.c', @@ -XXX,XX +XXX,XX @@ arm_user_ss.add( 'debug.c', 'gengvec.c', 'hflags.c', + 'mve_helper.c', 'neon_helper.c', 'op_helper.c', 'tlb_helper.c', diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mve_helper.c +++ b/target/arm/tcg/mve_helper.c @@ -XXX,XX +XXX,XX @@ #include "helper-mve.h" #include "internals.h" #include "vec_internal.h" -#include "accel/tcg/cpu-ldst.h" +#include "accel/tcg/cpu-ldst-common.h" #include "tcg/tcg.h" #include "fpu/softfloat.h" #include "crypto/clmul.h" -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-9-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/m_helper.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/target/arm/tcg/m_helper.c b/target/arm/tcg/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/m_helper.c +++ b/target/arm/tcg/m_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest) /* Note that these stores can throw exceptions on MPU faults */ ARMMMUIdx mmu_idx = arm_mmu_idx(env); - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, arm_to_core_mmu_idx(mmu_idx)); cpu_stl_mmu(env, sp, nextinst, oi, GETPC()); cpu_stl_mmu(env, sp + 4, saved_psr, oi, GETPC()); @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) bool lspact = env->v7m.fpccr[s] & R_V7M_FPCCR_LSPACT_MASK; uintptr_t ra = GETPC(); ARMMMUIdx mmu_idx = arm_mmu_idx(env); - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, arm_to_core_mmu_idx(mmu_idx)); assert(env->v7m.secure); @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlldm)(CPUARMState *env, uint32_t fptr) ARMCPU *cpu = env_archcpu(env); uintptr_t ra = GETPC(); ARMMMUIdx mmu_idx = arm_mmu_idx(env); - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, arm_to_core_mmu_idx(mmu_idx)); /* fptr is the value of Rn, the frame pointer we load the FP regs from */ -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-10-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/m_helper.c | 2 +- target/arm/tcg/meson.build | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/target/arm/tcg/m_helper.c b/target/arm/tcg/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/m_helper.c +++ b/target/arm/tcg/m_helper.c @@ -XXX,XX +XXX,XX @@ #include "qemu/log.h" #include "exec/page-protection.h" #ifdef CONFIG_TCG -#include "accel/tcg/cpu-ldst.h" +#include "accel/tcg/cpu-ldst-common.h" #include "semihosting/common-semi.h" #endif #if !defined(CONFIG_USER_ONLY) diff --git a/target/arm/tcg/meson.build b/target/arm/tcg/meson.build index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/meson.build +++ b/target/arm/tcg/meson.build @@ -XXX,XX +XXX,XX @@ arm_ss.add(when: 'TARGET_AARCH64', if_false: files('stubs32.c')) arm_ss.add(files( 'cpu32.c', - 'm_helper.c', )) arm_ss.add(when: 'TARGET_AARCH64', if_true: files( @@ -XXX,XX +XXX,XX @@ arm_common_system_ss.add( 'debug.c', 'hflags.c', 'gengvec.c', + 'm_helper.c', 'mve_helper.c', 'neon_helper.c', 'op_helper.c', @@ -XXX,XX +XXX,XX @@ arm_user_ss.add( 'debug.c', 'gengvec.c', 'hflags.c', + 'm_helper.c', 'mve_helper.c', 'neon_helper.c', 'op_helper.c', -- 2.43.0 From: Thomas Huth <thuth@redhat.com> When writing to this register, QEMU currently aborts: $ echo "readl 0x10000018" | ./qemu-system-arm -audiodev none,id=snd0 \ -M integratorcp,accel=qtest,audiodev=snd0 -display none -qtest stdio [I 0.000000] OPENED [R +0.001907] readl 0x10000018 qemu: hardware error: integratorcm_read: CM_LMBUSCNT [...] Aborted (core dumped) This is bad, a guest should ideally never be able to kill QEMU like this. Now, according to the "Intergrator/CP User Guide" from: https://developer.arm.com/documentation/dui0159/b/porting-integrator-ap-and-im-pd1/registers "The Integrator/AP CM_LMBUSCNT has been removed." That means this register does not seem to be implemented on real CP boards at all, only for older AP boards. Thus it should be fine if we simply ignore this register in QEMU and handle it like all other unimplemented registers in the "default" handler of the case statement. Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3407 Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20260420064933.64765-1-thuth@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/integratorcp.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/hw/arm/integratorcp.c b/hw/arm/integratorcp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/integratorcp.c +++ b/hw/arm/integratorcp.c @@ -XXX,XX +XXX,XX @@ static uint64_t integratorcm_read(void *opaque, hwaddr offset, } else { return s->cm_lock; } - case 6: /* CM_LMBUSCNT */ - /* ??? High frequency timer. */ - hw_error("integratorcm_read: CM_LMBUSCNT"); case 7: /* CM_AUXOSC */ return s->cm_auxosc; case 8: /* CM_SDRAM */ -- 2.43.0 include/hw/arm/primecell.h used to be more expansive, but now the only thing it defines is the ARM_SYSCTL_GPIO_* constants for the GPIO lines for the arm-sysctl system-control device used on the Realview, Versatile and Versatile Express boards. Replace it with a header file specific to that device. virt.c and vmapple.c included primecell.h despite not using the constants it defined; there we can simply drop the include entirely. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20260416172627.690396-1-peter.maydell@linaro.org --- MAINTAINERS | 2 +- hw/arm/realview.c | 2 +- hw/arm/vexpress.c | 2 +- hw/arm/virt.c | 1 - hw/misc/arm_sysctl.c | 2 +- hw/vmapple/vmapple.c | 1 - include/hw/arm/primecell.h | 12 ------------ include/hw/misc/arm_sysctl.h | 16 ++++++++++++++++ 8 files changed, 20 insertions(+), 18 deletions(-) delete mode 100644 include/hw/arm/primecell.h create mode 100644 include/hw/misc/arm_sysctl.h diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/ssi/pl022.c F: include/hw/ssi/pl022.h F: hw/rtc/pl031.c F: include/hw/rtc/pl031.h -F: include/hw/arm/primecell.h F: hw/timer/cmsdk-apb-timer.c F: include/hw/timer/cmsdk-apb-timer.h F: tests/qtest/cmsdk-apb-timer-test.c @@ -XXX,XX +XXX,XX @@ F: hw/*/versatile* F: hw/i2c/arm_sbcon_i2c.c F: include/hw/i2c/arm_sbcon_i2c.h F: hw/misc/arm_sysctl.c +F: include/hw/misc/arm_sysctl.h F: docs/system/arm/versatile.rst Virt diff --git a/hw/arm/realview.c b/hw/arm/realview.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/realview.c +++ b/hw/arm/realview.c @@ -XXX,XX +XXX,XX @@ #include "target/arm/cpu.h" #include "hw/core/sysbus.h" #include "hw/arm/boot.h" -#include "hw/arm/primecell.h" #include "hw/arm/machines-qom.h" #include "hw/core/split-irq.h" +#include "hw/misc/arm_sysctl.h" #include "hw/net/lan9118.h" #include "hw/net/smc91c111.h" #include "hw/pci/pci.h" diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/vexpress.c +++ b/hw/arm/vexpress.c @@ -XXX,XX +XXX,XX @@ #include "qemu/datadir.h" #include "hw/core/sysbus.h" #include "hw/arm/boot.h" -#include "hw/arm/primecell.h" #include "hw/arm/machines-qom.h" +#include "hw/misc/arm_sysctl.h" #include "hw/net/lan9118.h" #include "hw/i2c/i2c.h" #include "net/net.h" diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ #include "monitor/qdev.h" #include "hw/core/sysbus.h" #include "hw/arm/boot.h" -#include "hw/arm/primecell.h" #include "hw/arm/virt.h" #include "hw/arm/machines-qom.h" #include "hw/block/flash.h" diff --git a/hw/misc/arm_sysctl.c b/hw/misc/arm_sysctl.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/arm_sysctl.c +++ b/hw/misc/arm_sysctl.c @@ -XXX,XX +XXX,XX @@ #include "system/runstate.h" #include "qemu/bitops.h" #include "hw/core/sysbus.h" +#include "hw/misc/arm_sysctl.h" #include "migration/vmstate.h" -#include "hw/arm/primecell.h" #include "qemu/log.h" #include "qemu/module.h" #include "qom/object.h" diff --git a/hw/vmapple/vmapple.c b/hw/vmapple/vmapple.c index XXXXXXX..XXXXXXX 100644 --- a/hw/vmapple/vmapple.c +++ b/hw/vmapple/vmapple.c @@ -XXX,XX +XXX,XX @@ #include "hw/core/sysbus.h" #include "hw/usb/usb.h" #include "hw/arm/boot.h" -#include "hw/arm/primecell.h" #include "hw/char/pl011.h" #include "hw/intc/arm_gic.h" #include "hw/intc/arm_gicv3_common.h" diff --git a/include/hw/arm/primecell.h b/include/hw/arm/primecell.h deleted file mode 100644 index XXXXXXX..XXXXXXX --- a/include/hw/arm/primecell.h +++ /dev/null @@ -XXX,XX +XXX,XX @@ -#ifndef PRIMECELL_H -#define PRIMECELL_H - -/* Declarations for ARM PrimeCell based periperals. */ -/* Also includes some devices that are currently only used by the - ARM boards. */ - -/* arm_sysctl GPIO lines */ -#define ARM_SYSCTL_GPIO_MMC_WPROT 0 -#define ARM_SYSCTL_GPIO_MMC_CARDIN 1 - -#endif diff --git a/include/hw/misc/arm_sysctl.h b/include/hw/misc/arm_sysctl.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/arm_sysctl.h @@ -XXX,XX +XXX,XX @@ +/* + * Status and system control registers for ARM RealView/Versatile boards. + * + * Copyright (c) Linaro Ltd + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#ifndef HW_MISC_ARM_SYSCTL_H +#define HW_MISC_ARM_SYSCTL_H + +/* arm_sysctl inbound GPIO lines */ +#define ARM_SYSCTL_GPIO_MMC_WPROT 0 +#define ARM_SYSCTL_GPIO_MMC_CARDIN 1 + +#endif -- 2.43.0 If we create a normally-AArch64 CPU and configure it with aarch64=off, this will by default leave all the AArch64 ID register values in its ARMISARegisters struct untouched. That in turn means that tests of cpu_isar_feature(aa64_something, cpu) will return true. Until now we have had a design policy that you shouldn't check an aa64_ feature unless you know that the CPU has AArch64; but this is quite fragile as it's easy to forget and only causes a problem in the corner case where AArch64 was turned off. In particular, when we extend the ability to disable AArch64 from only KVM to also TCG there are many more aa64 feature check points which we would otherwise have to audit for whether they needed to be guarded with a check on ARM_FEATURE_AARCH64. Instead, make the CPU realize function zero out all the 64-bit ID registers if a TCG CPU doesn't have AArch64; this will make aa64_ feature tests generally return false. We only do this for TCG because only TCG really needs it, and for KVM it might be confusing to have QEMU's idea of the ID registers be different from KVM's. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260416165353.589569-2-peter.maydell@linaro.org --- target/arm/cpu.c | 35 +++++++++++++++++++++++++++++++++++ target/arm/cpu.h | 3 ++- 2 files changed, 37 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ void arm_cpu_finalize_features(ARMCPU *cpu, Error **errp) } } +static void arm_clear_aarch64_idregs(ARMCPU *cpu) +{ + /* Zero out all the AArch64 ID registers in ARMISARegisters */ + SET_IDREG(&cpu->isar, ID_AA64ISAR0, 0); + SET_IDREG(&cpu->isar, ID_AA64ISAR1, 0); + SET_IDREG(&cpu->isar, ID_AA64ISAR2, 0); + SET_IDREG(&cpu->isar, ID_AA64PFR0, 0); + SET_IDREG(&cpu->isar, ID_AA64PFR1, 0); + SET_IDREG(&cpu->isar, ID_AA64PFR2, 0); + SET_IDREG(&cpu->isar, ID_AA64MMFR0, 0); + SET_IDREG(&cpu->isar, ID_AA64MMFR1, 0); + SET_IDREG(&cpu->isar, ID_AA64MMFR2, 0); + SET_IDREG(&cpu->isar, ID_AA64MMFR3, 0); + SET_IDREG(&cpu->isar, ID_AA64DFR0, 0); + SET_IDREG(&cpu->isar, ID_AA64DFR1, 0); + SET_IDREG(&cpu->isar, ID_AA64AFR0, 0); + SET_IDREG(&cpu->isar, ID_AA64AFR1, 0); + SET_IDREG(&cpu->isar, ID_AA64ZFR0, 0); + SET_IDREG(&cpu->isar, ID_AA64SMFR0, 0); +} + static void arm_cpu_realizefn(DeviceState *dev, Error **errp) { CPUState *cs = CPU(dev); @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) } #endif + /* + * A TCG aarch64=off CPU has no AArch64 at all, so we clear out the + * ID registers to avoid cpu_isar_feature(aa64_something, cpu) tests + * incorrectly returning true. We don't do this for other accelerators + * (which in practice means "for KVM", since no others have AArch32 + * guest support) because from KVM's point of view the AArch64 ID + * registers still exist and must have their correct values. So we + * avoid clearing them out so that we don't have QEMU and KVM with + * different ideas of the ID registers. + */ + if (tcg_enabled() && !arm_feature(env, ARM_FEATURE_AARCH64)) { + arm_clear_aarch64_idregs(cpu); + } + #ifdef CONFIG_USER_ONLY /* * User mode relies on IC IVAU instructions to catch modification of diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ArchCPU { * Note that if you add an ID register to the ARMISARegisters struct * you need to also update the 32-bit and 64-bit versions of the * kvm_arm_get_host_cpu_features() function to correctly populate the - * field by reading the value from the KVM vCPU. + * field by reading the value from the KVM vCPU. If it is an AArch64 + * ID register then you also must update arm_clear_aarch64_idregs(). */ struct ARMISARegisters { uint32_t mvfr0; -- 2.43.0 Allow the 'aarch64=off' property, which is currently KVM-only, to be set for TCG CPUs also. Note that we don't permit it on the qemu-aarch64 user-mode binary: this makes no sense as that executable can only handle AArch64 syscalls (and it would also assert at startup since it doesn't compile in the A32-specific GDB xml files like arm-neon.xml). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Clément Chigot <chigot@adacore.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20260416165353.589569-3-peter.maydell@linaro.org --- docs/system/arm/cpu-features.rst | 10 +++++---- target/arm/cpu-features.h | 5 +++++ target/arm/cpu.c | 36 ++++++++++++++++++++++++++++---- tests/qtest/arm-cpu-features.c | 8 ++----- 4 files changed, 45 insertions(+), 14 deletions(-) diff --git a/docs/system/arm/cpu-features.rst b/docs/system/arm/cpu-features.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/cpu-features.rst +++ b/docs/system/arm/cpu-features.rst @@ -XXX,XX +XXX,XX @@ not implement ARMv8-A, will not have the ``aarch64`` CPU property. QEMU's support may be limited for some CPU features, only partially supporting the feature or only supporting the feature under certain configurations. For example, the ``aarch64`` CPU feature, which, when -disabled, enables the optional AArch32 CPU feature, is only supported -when using the KVM accelerator and when running on a host CPU type that -supports the feature. While ``aarch64`` currently only works with KVM, -it could work with TCG. CPU features that are specific to KVM are +disabled, enables the optional AArch32 CPU feature, can only be set to +``off`` on the TCG and KVM accelerators, and it cannot be set to +``off`` under KVM unless running on a host CPU type that supports +running guests in AArch32. + +CPU features that are inherently specific to KVM are prefixed with "kvm-" and are described in "KVM VCPU Features". CPU Feature Probing diff --git a/target/arm/cpu-features.h b/target/arm/cpu-features.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu-features.h +++ b/target/arm/cpu-features.h @@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa64_aa32_el2(const ARMISARegisters *id) return FIELD_EX64_IDREG(id, ID_AA64PFR0, EL2) >= 2; } +static inline bool isar_feature_aa64_aa32_el3(const ARMISARegisters *id) +{ + return FIELD_EX64_IDREG(id, ID_AA64PFR0, EL3) >= 2; +} + static inline bool isar_feature_aa64_ras(const ARMISARegisters *id) { return FIELD_EX64_IDREG(id, ID_AA64PFR0, RAS) != 0; diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void aarch64_cpu_set_aarch64(Object *obj, bool value, Error **errp) * uniform execution state like do_interrupt. */ if (value == false) { - if (!kvm_enabled() || !kvm_arm_aarch32_supported()) { - error_setg(errp, "'aarch64' feature cannot be disabled " - "unless KVM is enabled and 32-bit EL1 " - "is supported"); + if (kvm_enabled()) { + if (!kvm_arm_aarch32_supported()) { + error_setg(errp, "'aarch64' feature cannot be disabled for KVM " + "because this host does not support 32-bit EL1"); + return; + } + } else if (tcg_enabled()) { +#ifdef CONFIG_USER_ONLY + error_setg(errp, "'aarch64' feature cannot be disabled for " + "usermode emulator qemu-aarch64; use qemu-arm instead"); + return; +#else + bool aa32_at_highest_el; + if (arm_feature(&cpu->env, ARM_FEATURE_EL3)) { + aa32_at_highest_el = cpu_isar_feature(aa64_aa32_el3, cpu); + } else if (arm_feature(&cpu->env, ARM_FEATURE_EL2)) { + aa32_at_highest_el = cpu_isar_feature(aa64_aa32_el2, cpu); + } else { + aa32_at_highest_el = cpu_isar_feature(aa64_aa32_el1, cpu); + } + + if (!aa32_at_highest_el) { + error_setg(errp, "'aarch64' feature cannot be disabled for " + "this TCG CPU because it does not support 32-bit " + "execution at its highest implemented exception " + "level"); + return; + } +#endif + } else { + error_setg(errp, "'aarch64' feature cannot be disabled for " + "this accelerator"); return; } unset_feature(&cpu->env, ARM_FEATURE_AARCH64); diff --git a/tests/qtest/arm-cpu-features.c b/tests/qtest/arm-cpu-features.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/arm-cpu-features.c +++ b/tests/qtest/arm-cpu-features.c @@ -XXX,XX +XXX,XX @@ static void test_query_cpu_model_expansion(const void *data) sve_tests_default(qts, "max"); pauth_tests_default(qts, "max"); - /* Test that features that depend on KVM generate errors without. */ - assert_error(qts, "max", - "'aarch64' feature cannot be disabled " - "unless KVM is enabled and 32-bit EL1 " - "is supported", - "{ 'aarch64': false }"); + /* TCG allows us to turn off AArch64 on the 'max' CPU type */ + assert_set_feature(qts, "max", "aarch64", false); } qtest_quit(qts); -- 2.43.0 Add a basic test of the TCG 'aarch64=off' functionality; this is the same as our existing arm/test_virt test, but it runs the AArch32 guest kernel on qemu-system-aarch64 with -cpu max,aarch64=off. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20260416165353.589569-4-peter.maydell@linaro.org --- tests/functional/aarch64/meson.build | 1 + .../aarch64/test_virt_aarch64_off.py | 37 +++++++++++++++++++ 2 files changed, 38 insertions(+) create mode 100755 tests/functional/aarch64/test_virt_aarch64_off.py diff --git a/tests/functional/aarch64/meson.build b/tests/functional/aarch64/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/functional/aarch64/meson.build +++ b/tests/functional/aarch64/meson.build @@ -XXX,XX +XXX,XX @@ tests_aarch64_system_thorough = [ 'tcg_plugins', 'tuxrun', 'virt', + 'virt_aarch64_off', 'virt_gpu', 'virt_vbsa', 'xen', diff --git a/tests/functional/aarch64/test_virt_aarch64_off.py b/tests/functional/aarch64/test_virt_aarch64_off.py new file mode 100755 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/functional/aarch64/test_virt_aarch64_off.py @@ -XXX,XX +XXX,XX @@ +#!/usr/bin/env python3 +# +# Functional test that boots an AArch32 Linux kernel and checks the console +# on a TCG aarch64 CPU with aarch64=off. This is the same image etc +# as we use in tests/functional/arm/test_virt.py. +# +# SPDX-License-Identifier: GPL-2.0-or-later + +from qemu_test import LinuxKernelTest, Asset + +class ArmVirtMachine(LinuxKernelTest): + + ASSET_KERNEL = Asset( + ('https://archives.fedoraproject.org/pub/archive/fedora/linux/' + 'releases/29/Everything/armhfp/os/images/pxeboot/vmlinuz'), + '18dd5f1a9a28bd539f9d047f7c0677211bae528e8712b40ca5a229a4ad8e2591') + + def test_arm_virt(self): + self.set_machine('virt') + # KVM aarch64=off requires a host CPU that supports it, so + # restrict the test to TCG only + self.require_accelerator('tcg') + self.vm.add_args('-cpu', 'max,aarch64=off') + + kernel_path = self.ASSET_KERNEL.fetch() + + self.vm.set_console() + kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE + + 'console=ttyAMA0') + self.vm.add_args('-kernel', kernel_path, + '-append', kernel_command_line) + self.vm.launch() + console_pattern = 'Kernel command line: %s' % kernel_command_line + self.wait_for_console_pattern(console_pattern) + +if __name__ == '__main__': + LinuxKernelTest.main() -- 2.43.0 From: Eric Auger <eric.auger@redhat.com> We introduce a datatype for a tolerance with respect to a given cpreg migration issue. The tolerance applies to a given cpreg kvm index, and can be of different types: a) mismatch in cpreg indexes - ToleranceNotOnBothEnds (cpreg index is allowed to be only present on one end) - ToleranceOnlySrcTestValue (cpreg index is allowed to be only present in source if its value @mask field matches @value) b) mismatch in cpreg values - ToleranceDiffInMask (value differences are allowed only within a mask) - ToleranceFieldLT (incoming field value must be less than a given value) - ToleranceFieldGT (incoming field value must be greater than a given value) A QLIST of such tolerances can be populated using a new helper: arm_register_cpreg_mig_tolerance() and arm_cpu_match_cpreg_mig_tolerance() allows to check whether a tolerance exists for a given kvm index and its criterion is matched. callers for those helpers will be introduced in subsequent patches. Only registration of migration tolerances related to cpreg index mismatch is currently allowed. Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-id: 20260420140552.104369-2-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 82 ++++++++++++++++++++++++++++++++++++++++++ target/arm/cpu.h | 1 + target/arm/internals.h | 54 ++++++++++++++++++++++++++++ 3 files changed, 137 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ void arm_register_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook, QLIST_INSERT_HEAD(&cpu->el_change_hooks, entry, node); } +static ARMCPRegMigTolerance *find_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx) +{ + ARMCPRegMigTolerance *t; + QLIST_FOREACH(t, &cpu->cpreg_mig_tolerances, node) { + if (t->kvmidx == kvmidx) { + return t; + } + } + return NULL; +} + +void arm_register_cpreg_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx, + uint64_t mask, uint64_t value, + ARMCPRegMigToleranceType type) +{ + ARMCPRegMigTolerance *entry; + + /* make sure the kvmidx has not tolerance already registered */ + assert(!find_mig_tolerance(cpu, kvmidx)); + + assert(type == ToleranceNotOnBothEnds || + type == ToleranceOnlySrcTestValue); + + entry = g_new0(ARMCPRegMigTolerance, 1); + + entry->kvmidx = kvmidx; + entry->mask = mask; + entry->value = value; + entry->type = type; + + QLIST_INSERT_HEAD(&cpu->cpreg_mig_tolerances, entry, node); +} + +bool arm_cpu_match_cpreg_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx, + uint64_t vmstate_value, uint64_t local_value, + ARMCPRegMigToleranceType type) +{ + ARMCPRegMigTolerance *t = find_mig_tolerance(cpu, kvmidx); + uint64_t diff, diff_outside_mask, field; + + if (!t || t->type != type) { + return false; + } + + if (type == ToleranceNotOnBothEnds) { + return true; + } + + if (type == ToleranceOnlySrcTestValue && + ((vmstate_value & t->mask) == t->value)) { + return true; + } + + /* Need to check the mask */ + diff = vmstate_value ^ local_value; + diff_outside_mask = diff & ~t->mask; + + if (diff_outside_mask) { + /* there are differences outside of the mask */ + return false; + } + if (type == ToleranceDiffInMask) { + /* differences only in the field, tolerance matched */ + return true; + } + /* need to compare field value against authorized ones */ + field = vmstate_value & t->mask; + if (type == ToleranceFieldLT && (field < t->value)) { + return true; + } + if (type == ToleranceFieldGT && (field > t->value)) { + return true; + } + return false; +} + static void cp_reg_reset(gpointer key, gpointer value, gpointer opaque) { /* Reset a single ARMCPRegInfo register */ @@ -XXX,XX +XXX,XX @@ static void arm_cpu_initfn(Object *obj) QLIST_INIT(&cpu->pre_el_change_hooks); QLIST_INIT(&cpu->el_change_hooks); + QLIST_INIT(&cpu->cpreg_mig_tolerances); #ifdef CONFIG_USER_ONLY # ifdef TARGET_AARCH64 @@ -XXX,XX +XXX,XX @@ static void arm_cpu_finalizefn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); ARMELChangeHook *hook, *next; + ARMCPRegMigTolerance *t, *n; g_hash_table_destroy(cpu->cp_regs); @@ -XXX,XX +XXX,XX @@ static void arm_cpu_finalizefn(Object *obj) QLIST_REMOVE(hook, node); g_free(hook); } + QLIST_FOREACH_SAFE(t, &cpu->cpreg_mig_tolerances, node, n) { + QLIST_REMOVE(t, node); + g_free(t); + } #ifndef CONFIG_USER_ONLY if (cpu->pmu_timer) { timer_free(cpu->pmu_timer); diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ArchCPU { QLIST_HEAD(, ARMELChangeHook) pre_el_change_hooks; QLIST_HEAD(, ARMELChangeHook) el_change_hooks; + QLIST_HEAD(, ARMCPRegMigTolerance) cpreg_mig_tolerances; int32_t node_id; /* NUMA node this CPU belongs to */ diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ int compare_u64(const void *a, const void *b); /* Used in FEAT_MEC to set the MECIDWidthm1 field in the MECIDR_EL2 register. */ #define MECID_WIDTH 16 +typedef enum { + ToleranceNotOnBothEnds, + ToleranceOnlySrcTestValue, + ToleranceDiffInMask, + ToleranceFieldLT, + ToleranceFieldGT, +} ARMCPRegMigToleranceType; + +typedef struct ARMCPRegMigTolerance { + uint64_t kvmidx; + uint64_t mask; + uint64_t value; + ARMCPRegMigToleranceType type; + QLIST_ENTRY(ARMCPRegMigTolerance) node; +} ARMCPRegMigTolerance; + +/** + * arm_register_cpreg_mig_tolerance: + * Register a migration tolerance wrt one given cpreg identified by its + * @kvmidx. Calling this function twice for the same @kvmidx is a + * programming error and will cause an assertion failure. + * + * @cpu: vcpu to apply the migration tolerance on + * @kvmidx: kvm index of the cpreg the tolerance applies to + * @mask: bitmask where a difference is tolerated + * (relevant with ToleranceDiffInMask) + * @value: value the bitmask field is compared with + * (relevant with ToleranceFieldLT and ToleranceFieldGT) + * @type: type of the migration tolerance: + * - ToleranceNotOnBothEnds (cpreg index is allowed to be only present + * on one end) + * - ToleranceOnlySrcTestValue (cpreg index is allowed to be only + * present in source if its value @mask field matches @value) + * - ToleranceDiffInMask (mismatch in cpreg values are only tolerated + * if differences are within @mask) + * - ToleranceFieldLT (mismatch in cpreg values are only tolerated + * if incoming @bitmask field value is less than @value) + * - ToleranceFieldGT (mismatch in cpreg values are only tolerated + * if incoming @bitmask field value is greater than @value) + */ +void arm_register_cpreg_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx, + uint64_t mask, uint64_t value, + ARMCPRegMigToleranceType type); + +/** + * arm_cpu_match_cpreg_mig_tolerance: + * Check whether a tolerance of type @type exists for a given @kvmidx + * and the tolerance criterion is satisfied + */ +bool arm_cpu_match_cpreg_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx, + uint64_t vmstate_value, uint64_t local_value, + ARMCPRegMigToleranceType type); + + #endif -- 2.43.0 From: Eric Auger <eric.auger@redhat.com> If there is a mismatch between the cpreg indexes found on both ends, check whether a tolerance was registered for the given kvmidx. If any, silence warning/errors. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20260420140552.104369-3-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/machine.c | 21 +++++++++++++++------ target/arm/trace-events | 2 ++ 2 files changed, 17 insertions(+), 6 deletions(-) diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static void handle_cpreg_missing_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx { g_autofree gchar *name = print_register_name(kvmidx); + if (arm_cpu_match_cpreg_mig_tolerance(cpu, kvmidx, + 0, 0, ToleranceNotOnBothEnds)) { + trace_tolerate_cpreg_missing_in_incoming_stream(name); + return; + } warn_report("%s: %s " "expected by the destination but not in the incoming stream: " "skip it", __func__, name); } /* - * Handle the situation where @kvmidx is in the incoming stream - * but not on destination. This currently fails the migration but - * we plan to accomodate some exceptions, hence the boolean returned value. + * Handle the situation where @kvmidx is in the incoming + * stream but not on destination. This fails the migration if + * no cpreg mig tolerance is matched for this @kvmidx + * Return true if the migration should eventually fail */ static bool handle_cpreg_only_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx) { g_autofree gchar *name = print_register_name(kvmidx); - bool fail = true; + if (arm_cpu_match_cpreg_mig_tolerance(cpu, kvmidx, + 0, 0, ToleranceNotOnBothEnds)) { + trace_tolerate_cpreg_only_in_incoming_stream(name); + return false; + } error_report("%s: %s in the incoming stream but unknown on the " "destination: fail migration", __func__, name); - - return fail; + return true; } static int cpu_post_load(void *opaque, int version_id) diff --git a/target/arm/trace-events b/target/arm/trace-events index XXXXXXX..XXXXXXX 100644 --- a/target/arm/trace-events +++ b/target/arm/trace-events @@ -XXX,XX +XXX,XX @@ arm_psci_call(uint64_t x0, uint64_t x1, uint64_t x2, uint64_t x3, uint32_t cpuid # machine.c cpu_post_load(uint32_t cpreg_vmstate_array_len, uint32_t cpreg_array_len) "cpreg_vmstate_array_len=%d cpreg_array_len=%d" +tolerate_cpreg_missing_in_incoming_stream(char *name) "%s is missing in incoming stream but this is explicitly tolerated" +tolerate_cpreg_only_in_incoming_stream(char *name) "%s is in incoming stream but not on destination but this is explicitly tolerated" -- 2.43.0 From: Eric Auger <eric.auger@redhat.com> Pass the value of the incoming register to handle_cpreg_only_in_incoming_stream and check whether there is a matching ToleranceOnlySrcTestValue tolerance. Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-id: 20260420140552.104369-4-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/machine.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static void handle_cpreg_missing_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx * no cpreg mig tolerance is matched for this @kvmidx * Return true if the migration should eventually fail */ -static bool handle_cpreg_only_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx) +static bool +handle_cpreg_only_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx, uint64_t value) { g_autofree gchar *name = print_register_name(kvmidx); if (arm_cpu_match_cpreg_mig_tolerance(cpu, kvmidx, - 0, 0, ToleranceNotOnBothEnds)) { + 0, 0, ToleranceNotOnBothEnds) || + arm_cpu_match_cpreg_mig_tolerance(cpu, kvmidx, + value, 0, ToleranceOnlySrcTestValue)) { trace_tolerate_cpreg_only_in_incoming_stream(name); return false; } @@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id) } if (cpu->cpreg_vmstate_indexes[v] < cpu->cpreg_indexes[i]) { fail = handle_cpreg_only_in_incoming_stream(cpu, - cpu->cpreg_vmstate_indexes[v++]); + cpu->cpreg_vmstate_indexes[v], + cpu->cpreg_vmstate_values[v]); + v++; continue; } /* matching register, copy the value over */ @@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id) */ for ( ; v < cpu->cpreg_vmstate_array_len; v++) { fail = handle_cpreg_only_in_incoming_stream(cpu, - cpu->cpreg_vmstate_indexes[v]); + cpu->cpreg_vmstate_indexes[v], + cpu->cpreg_vmstate_values[v]); } if (fail) { return -1; -- 2.43.0 From: Eric Auger <eric.auger@redhat.com> Before linux v6.13 those registers were erroneously unconditionally exposed and this was fixed by commits: - 0fcb4eea5345 ("KVM: arm64: Hide TCR2_EL1 from userspace when disabled for guests") - a68cddbe47ef ("KVM: arm64: Hide S1PIE registers from userspace when disabled for guests") in v6.13. This means if we migrate from an old kernel host to a >= 6.13 kernel host, migration currently fails. Declare cpreg migration tolerance for those registers. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Sebastian Ott <sebott@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20260420140552.104369-5-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu64.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_a53_initfn(Object *obj) define_cortex_a72_a57_a53_cp_reginfo(cpu); } +#if defined(CONFIG_KVM) +static void kvm_arm_set_cpreg_mig_tolerances(ARMCPU *cpu) +{ + /* + * Registers that may be in the incoming stream and not exposed + * on the destination + */ + + /* + * TCR_EL1 was erroneously unconditionnally exposed before linux v6.13. + * See commit 0fcb4eea5345 ("KVM: arm64: Hide TCR2_EL1 from userspace + * when disabled for guests") + */ + arm_register_cpreg_mig_tolerance(cpu, ARM64_SYS_REG(3, 0, 2, 0, 3), + 0, 0, ToleranceNotOnBothEnds); + /* + * PIRE0_EL1 and PIR_EL1 were erroneously unconditionnally exposed + * before linux v6.13. See commit a68cddbe47ef ("KVM: arm64: Hide + * S1PIE registers from userspace when disabled for guests") + */ + arm_register_cpreg_mig_tolerance(cpu, ARM64_SYS_REG(3, 0, 10, 2, 2), + 0, 0, ToleranceNotOnBothEnds); + arm_register_cpreg_mig_tolerance(cpu, ARM64_SYS_REG(3, 0, 10, 2, 3), + 0, 0, ToleranceNotOnBothEnds); +} +#endif + static void aarch64_host_initfn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); @@ -XXX,XX +XXX,XX @@ static void aarch64_host_initfn(Object *obj) #endif #if defined(CONFIG_KVM) + kvm_arm_set_cpreg_mig_tolerances(cpu); kvm_arm_set_cpu_features_from_host(cpu); aarch64_add_sve_properties(obj); #elif defined(CONFIG_HVF) -- 2.43.0 From: Eric Auger <eric.auger@redhat.com> KVM_REG_ARM_VENDOR_HYP_BMAP_2 pseudo FW register is exposed from v6.15 onwards. Backward migration from a >= v6.15 to an older kernel would fail without cpreg migration tolerance definition for this register. If the register is present on source but not on destination, its value must be checked to make sure it matches the reset value, ie. 0, meaning no service is exposed to the guest, hence the choice of a ToleranceOnlySrcTestValue migration tolerance. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20260420140552.104369-6-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu64.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void kvm_arm_set_cpreg_mig_tolerances(ARMCPU *cpu) 0, 0, ToleranceNotOnBothEnds); arm_register_cpreg_mig_tolerance(cpu, ARM64_SYS_REG(3, 0, 10, 2, 3), 0, 0, ToleranceNotOnBothEnds); + + /* + * KVM_REG_ARM_VENDOR_HYP_BMAP_2 pseudo FW register is exposed + * from v6.15 onwards. Backward migration from a >= v6.15 to an older + * kernel would fail without cpreg migration tolerance definition. + * If the register is present on source but not on destination, make + * sure it has its reset value, ie. 0, meaning no service is exposed + * to the guest. + */ + arm_register_cpreg_mig_tolerance(cpu, KVM_REG_ARM_FW_FEAT_BMAP_REG(3), + UINT64_MAX, 0, ToleranceOnlySrcTestValue); } #endif -- 2.43.0 From: Eric Auger <eric.auger@redhat.com> We want to remove AArch32 DBGDTRTX which was erroneously exposed. This was attempted by 655659a74a36b ("target/arm: Correct encoding of Debug Communications Channel registers") but it was discovered that the removal of this debug register broke forward migration on TCG. Now we have the cpreg migration tolerance infrastructure, we can declare one for the DBGDTRTX. This allow to revert the reinstate patch. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Sebastian Ott <sebott@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20260420140552.104369-7-eric.auger@redhat.com [PMM: revised comment, included note about when we can drop the workaround] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .fgt = FGT_CLIDR_EL1, .resetvalue = GET_IDREG(isar, CLIDR) }; + uint64_t dbgtr_el0_kvmidx = + cpreg_to_kvm_id(ENCODE_CP_REG(14, 0, 1, 0, 5, 3, 0)); + define_one_arm_cp_reg(cpu, &clidr); define_arm_cp_regs(cpu, v7_cp_reginfo); define_debug_regs(cpu); + /* + * We used to incorrectly expose a non-existent AArch32 "DBGDTRTX" + * register with this encoding. This has been fixed by commit + * 655659a74a36 ("target/arm: Correct encoding of Debug + * Communications Channel registers") by the introduction of correct + * separate cpreg definitions for AA64 and AA32 versions. However, + * the old cpreg definition couldn't be removed without breaking + * migration, so commit 4f2b82f604 reinstated the bogus encoding + * for migration data only. + * + * Now that we have migration tolerance infrastructure, we can use + * this to allow forward migration from the buggy QEMU versions, + * accepting and ignoring the bogus register if it is in the + * source data. QEMU 11.0 was the last version that sent the + * bogus encoding, so this workaround can be removed at the point + * where we no longer care about migration from that version + * (i.e. when we remove the "virt-11.0" machine type). + */ + arm_register_cpreg_mig_tolerance(cpu, dbgtr_el0_kvmidx, + 0, 0, ToleranceNotOnBothEnds); } else { define_arm_cp_regs(cpu, not_v7_cp_reginfo); } -- 2.43.0 From: Eric Auger <eric.auger@redhat.com> This reverts commit 4f2b82f60431 ("target/arm: Reinstate bogus AArch32 DBGDTRTX register for migration compat). We don't need that commit anymore as the AArch32 DBGDTRTX register is declared to be safe to ignore in the incoming migration stream. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Sebastian Ott <sebott@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20260420140552.104369-8-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/debug_helper.c | 29 ----------------------------- 1 file changed, 29 deletions(-) diff --git a/target/arm/debug_helper.c b/target/arm/debug_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/debug_helper.c +++ b/target/arm/debug_helper.c @@ -XXX,XX +XXX,XX @@ static void dbgclaimclr_write(CPUARMState *env, const ARMCPRegInfo *ri, env->cp15.dbgclaim &= ~(value & 0xFF); } -static CPAccessResult access_bogus(CPUARMState *env, const ARMCPRegInfo *ri, - bool isread) -{ - /* Always UNDEF, as if this cpreg didn't exist */ - return CP_ACCESS_UNDEFINED; -} - static const ARMCPRegInfo debug_cp_reginfo[] = { /* * DBGDRAR, DBGDSAR: always RAZ since we don't implement memory mapped @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo debug_cp_reginfo[] = { .opc0 = 2, .opc1 = 3, .crn = 0, .crm = 4, .opc2 = 0, .access = PL0_RW, .accessfn = access_tdcc, .type = ARM_CP_CONST, .resetvalue = 0 }, - /* - * This is not a real AArch32 register. We used to incorrectly expose - * this due to a QEMU bug; to avoid breaking migration compatibility we - * need to continue to provide it so that we don't fail the inbound - * migration when it tells us about a sysreg that we don't have. - * We set an always-fails .accessfn, which means that the guest doesn't - * actually see this register (it will always UNDEF, identically to if - * there were no cpreg definition for it other than that we won't print - * a LOG_UNIMP message about it), and we set the ARM_CP_NO_GDB flag so the - * gdbstub won't see it either. - * (We can't just set .access = 0, because add_cpreg_to_hashtable() - * helpfully ignores cpregs which aren't accessible to the highest - * implemented EL.) - * - * TODO: implement a system for being able to describe "this register - * can be ignored if it appears in the inbound stream"; then we can - * remove this temporary hack. - */ - { .name = "BOGUS_DBGDTR_EL0", .state = ARM_CP_STATE_AA32, - .cp = 14, .opc1 = 3, .crn = 0, .crm = 5, .opc2 = 0, - .access = PL0_RW, .accessfn = access_bogus, - .type = ARM_CP_CONST | ARM_CP_NO_GDB, .resetvalue = 0 }, /* * OSECCR_EL1 provides a mechanism for an operating system * to access the contents of EDECCR. EDECCR is not implemented though, -- 2.43.0 From: Osama Abdelkader <osama.abdelkader@gmail.com> fdt_node_offset_by_compatible(fdt, -1, compat) only finds the first match. If the blob has more than one node with the same compatible string, extra nodes will remain active. Remove all the matching nodes, using the same loop as imx8mp-evk.c does for this purpose. Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com> Message-id: 20260420162114.308519-1-osama.abdelkader@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/raspi4b.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/hw/arm/raspi4b.c b/hw/arm/raspi4b.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/raspi4b.c +++ b/hw/arm/raspi4b.c @@ -XXX,XX +XXX,XX @@ static void raspi4_modify_dtb(const struct arm_boot_info *info, void *fdt) for (int i = 0; i < ARRAY_SIZE(nodes_to_remove); i++) { const char *dev_str = nodes_to_remove[i]; + int offset; - int offset = fdt_node_offset_by_compatible(fdt, -1, dev_str); - if (offset >= 0) { - if (!fdt_nop_node(fdt, offset)) { - warn_report("bcm2711 dtc: %s has been disabled!", dev_str); + offset = fdt_node_offset_by_compatible(fdt, -1, dev_str); + while (offset >= 0) { + if (fdt_nop_node(fdt, offset) == 0) { + warn_report("bcm2711 dtb: %s has been disabled!", dev_str); } + offset = fdt_node_offset_by_compatible(fdt, offset, dev_str); } } -- 2.43.0 From: Yucai Liu <1486344514@qq.com> Implement a basic i.MX6UL LCDIF controller model with MMIO registers, frame-done interrupt behavior, and framebuffer-backed display updates for RGB565 and XRGB8888 input formats. Place the LCDIF device under hw/display and build it via a dedicated CONFIG_IMX6UL_LCDIF symbol. Model register fields with registerfields.h helpers and provide migration support via vmstate. Signed-off-by: Yucai Liu <1486344514@qq.com> Message-id: 20260412110240.93116-2-yangyanglan718@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 2 + hw/display/Kconfig | 4 + hw/display/imx6ul_lcdif.c | 453 ++++++++++++++++++++++++++++++ hw/display/meson.build | 1 + include/hw/display/imx6ul_lcdif.h | 37 +++ 5 files changed, 497 insertions(+) create mode 100644 hw/display/imx6ul_lcdif.c create mode 100644 include/hw/display/imx6ul_lcdif.h diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ L: qemu-arm@nongnu.org S: Odd Fixes F: hw/arm/mcimx6ul-evk.c F: hw/arm/fsl-imx6ul.c +F: hw/display/imx6ul_lcdif.c F: hw/misc/imx6ul_ccm.c F: include/hw/arm/fsl-imx6ul.h +F: include/hw/display/imx6ul_lcdif.h F: include/hw/misc/imx6ul_ccm.h F: docs/system/arm/mcimx6ul-evk.rst diff --git a/hw/display/Kconfig b/hw/display/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/display/Kconfig +++ b/hw/display/Kconfig @@ -XXX,XX +XXX,XX @@ config PL110 bool select FRAMEBUFFER +config IMX6UL_LCDIF + bool + select FRAMEBUFFER + config SII9022 bool depends on I2C diff --git a/hw/display/imx6ul_lcdif.c b/hw/display/imx6ul_lcdif.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/display/imx6ul_lcdif.c @@ -XXX,XX +XXX,XX @@ +/* + * SPDX-License-Identifier: GPL-2.0-or-later + * + * i.MX6UL LCDIF controller + * + * Copyright (c) 2026 Yucai Liu <1486344514@qq.com> + */ + +#include "qemu/osdep.h" +#include "hw/display/imx6ul_lcdif.h" +#include "hw/core/irq.h" +#include "hw/core/registerfields.h" +#include "hw/display/framebuffer.h" +#include "migration/vmstate.h" +#include "system/address-spaces.h" +#include "qemu/module.h" +#include "qemu/units.h" +#include "ui/pixel_ops.h" + +#define LCDIF_MMIO_SIZE (16 * KiB) +#define LCDIF_RESET_CTRL1 0x000f0000 + +REG32(CTRL, 0x00) + FIELD(CTRL, RUN, 0, 1) + FIELD(CTRL, WORD_LENGTH, 8, 2) +REG32(CTRL1, 0x10) + FIELD(CTRL1, CUR_FRAME_DONE_IRQ, 9, 1) + FIELD(CTRL1, CUR_FRAME_DONE_IRQ_EN, 13, 1) + FIELD(CTRL1, BYTE_PACKING_FORMAT, 16, 4) +REG32(V4_TRANSFER_COUNT, 0x30) + FIELD(V4_TRANSFER_COUNT, H_COUNT, 0, 16) + FIELD(V4_TRANSFER_COUNT, V_COUNT, 16, 16) +REG32(V4_CUR_BUF, 0x40) +REG32(V4_NEXT_BUF, 0x50) +REG32(AS_NEXT_BUF, 0x230) + +#define REG_SET 0x4 +#define REG_CLR 0x8 +#define REG_TOG 0xc + +#define CTRL_WORD_LENGTH_16 0 +#define CTRL_WORD_LENGTH_24 3 + +#define FRAME_PERIOD_NS (16 * 1000 * 1000ULL) + +enum IMX6ULLCDIFReg { + IMX6UL_LCDIF_REG_CTRL = A_CTRL >> 4, + IMX6UL_LCDIF_REG_CTRL1 = A_CTRL1 >> 4, + IMX6UL_LCDIF_REG_V4_TRANSFER_COUNT = A_V4_TRANSFER_COUNT >> 4, + IMX6UL_LCDIF_REG_V4_CUR_BUF = A_V4_CUR_BUF >> 4, + IMX6UL_LCDIF_REG_V4_NEXT_BUF = A_V4_NEXT_BUF >> 4, + IMX6UL_LCDIF_REG_AS_NEXT_BUF = A_AS_NEXT_BUF >> 4, +}; + +static inline bool imx6ul_lcdif_reg_exists(hwaddr reg) +{ + return (reg >> 4) < IMX6UL_LCDIF_REGS_NUM; +} + +static inline bool imx6ul_lcdif_reg_has_setclr(hwaddr reg) +{ + switch (reg) { + case A_CTRL: + case A_CTRL1: + return true; + default: + return false; + } +} + +static inline bool imx6ul_lcdif_is_running(IMX6ULLCDIFState *s) +{ + uint32_t ctrl = s->regs[IMX6UL_LCDIF_REG_CTRL]; + + return FIELD_EX32(ctrl, CTRL, RUN); +} + +static inline bool imx6ul_lcdif_frame_done_pending(IMX6ULLCDIFState *s) +{ + uint32_t ctrl1 = s->regs[IMX6UL_LCDIF_REG_CTRL1]; + + return FIELD_EX32(ctrl1, CTRL1, CUR_FRAME_DONE_IRQ); +} + +static void imx6ul_lcdif_schedule_frame(IMX6ULLCDIFState *s) +{ + int64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + + timer_mod(s->frame_timer, now + FRAME_PERIOD_NS); +} + +static void imx6ul_lcdif_maybe_schedule_frame(IMX6ULLCDIFState *s) +{ + if (imx6ul_lcdif_is_running(s) && !imx6ul_lcdif_frame_done_pending(s)) { + imx6ul_lcdif_schedule_frame(s); + } else { + timer_del(s->frame_timer); + } +} + +static void imx6ul_lcdif_update_irq(IMX6ULLCDIFState *s) +{ + uint32_t ctrl1 = s->regs[IMX6UL_LCDIF_REG_CTRL1]; + bool level = FIELD_EX32(ctrl1, CTRL1, CUR_FRAME_DONE_IRQ_EN) && + FIELD_EX32(ctrl1, CTRL1, CUR_FRAME_DONE_IRQ); + + qemu_set_irq(s->irq, level); +} + +static void imx6ul_lcdif_frame_done(IMX6ULLCDIFState *s) +{ + uint32_t ctrl1 = s->regs[IMX6UL_LCDIF_REG_CTRL1]; + + ctrl1 = FIELD_DP32(ctrl1, CTRL1, CUR_FRAME_DONE_IRQ, 1); + s->regs[IMX6UL_LCDIF_REG_CTRL1] = ctrl1; + imx6ul_lcdif_update_irq(s); +} + +static void imx6ul_lcdif_draw_line_rgb565(void *opaque, uint8_t *dst, + const uint8_t *src, int width, + int dststep) +{ + uint32_t *dst32 = (uint32_t *)dst; + int i; + + for (i = 0; i < width; i++) { + uint16_t pixel = lduw_le_p(src); + uint8_t r = ((pixel >> 11) & 0x1f) << 3; + uint8_t g = ((pixel >> 5) & 0x3f) << 2; + uint8_t b = (pixel & 0x1f) << 3; + + *dst32++ = rgb_to_pixel32(r, g, b); + src += 2; + } +} + +static void imx6ul_lcdif_draw_line_xrgb8888(void *opaque, uint8_t *dst, + const uint8_t *src, int width, + int dststep) +{ + uint32_t *dst32 = (uint32_t *)dst; + int i; + + for (i = 0; i < width; i++) { + uint32_t pixel = ldl_le_p(src); + uint8_t r = (pixel >> 16) & 0xff; + uint8_t g = (pixel >> 8) & 0xff; + uint8_t b = pixel & 0xff; + + *dst32++ = rgb_to_pixel32(r, g, b); + src += 4; + } +} + +static void imx6ul_lcdif_update_display(void *opaque) +{ + IMX6ULLCDIFState *s = opaque; + DisplaySurface *surface = qemu_console_surface(s->con); + uint32_t transfer_count = s->regs[IMX6UL_LCDIF_REG_V4_TRANSFER_COUNT]; + uint32_t width = FIELD_EX32(transfer_count, V4_TRANSFER_COUNT, H_COUNT); + uint32_t height = FIELD_EX32(transfer_count, V4_TRANSFER_COUNT, V_COUNT); + uint32_t ctrl = s->regs[IMX6UL_LCDIF_REG_CTRL]; + uint32_t frame_base = s->regs[IMX6UL_LCDIF_REG_V4_CUR_BUF]; + drawfn fn; + int first = 0; + int last = 0; + int src_width; + + if (!imx6ul_lcdif_is_running(s) || width == 0 || height == 0) { + return; + } + + switch (FIELD_EX32(ctrl, CTRL, WORD_LENGTH)) { + case CTRL_WORD_LENGTH_16: + s->src_bpp = 2; + fn = imx6ul_lcdif_draw_line_rgb565; + break; + case CTRL_WORD_LENGTH_24: + s->src_bpp = 4; + fn = imx6ul_lcdif_draw_line_xrgb8888; + break; + default: + return; + } + + if (surface_width(surface) != width || surface_height(surface) != height) { + qemu_console_resize(s->con, width, height); + surface = qemu_console_surface(s->con); + s->invalidate = true; + } + + src_width = width * s->src_bpp; + if (s->invalidate || s->fb_base != frame_base || + s->src_width != src_width || s->rows != height) { + framebuffer_update_memory_section(&s->fbsection, get_system_memory(), + frame_base, height, src_width); + s->fb_base = frame_base; + s->src_width = src_width; + s->rows = height; + } + + framebuffer_update_display(surface, &s->fbsection, width, height, + src_width, surface_stride(surface), 0, + s->invalidate, fn, s, &first, &last); + if (first >= 0) { + dpy_gfx_update(s->con, 0, first, width, last - first + 1); + } + + s->invalidate = false; +} + +static void imx6ul_lcdif_invalidate_display(void *opaque) +{ + IMX6ULLCDIFState *s = opaque; + + s->invalidate = true; +} + +static const GraphicHwOps imx6ul_lcdif_graphic_ops = { + .invalidate = imx6ul_lcdif_invalidate_display, + .gfx_update = imx6ul_lcdif_update_display, +}; + +static void imx6ul_lcdif_frame_timer_cb(void *opaque) +{ + IMX6ULLCDIFState *s = opaque; + + if (!imx6ul_lcdif_is_running(s) || imx6ul_lcdif_frame_done_pending(s)) { + return; + } + + imx6ul_lcdif_frame_done(s); +} + +static uint64_t imx6ul_lcdif_read(void *opaque, hwaddr offset, unsigned size) +{ + IMX6ULLCDIFState *s = opaque; + hwaddr reg = offset & ~0xf; + uint32_t idx; + + assert(size == 4); + assert(!(offset & 0x3)); + assert(offset < LCDIF_MMIO_SIZE); + + idx = reg >> 4; + if (idx >= ARRAY_SIZE(s->regs)) { + return 0; + } + + return s->regs[idx]; +} + +static void imx6ul_lcdif_write(void *opaque, hwaddr offset, + uint64_t value, unsigned size) +{ + IMX6ULLCDIFState *s = opaque; + hwaddr reg = offset & ~0xf; + uint32_t idx; + uint32_t oldv; + + assert(size == 4); + assert(!(offset & 0x3)); + assert(offset < LCDIF_MMIO_SIZE); + + if (!imx6ul_lcdif_reg_exists(reg)) { + return; + } + + idx = reg >> 4; + oldv = s->regs[idx]; + + switch (offset & 0xf) { + case 0: + s->regs[idx] = (uint32_t)value; + break; + case REG_SET: + if (!imx6ul_lcdif_reg_has_setclr(reg)) { + return; + } + s->regs[idx] = oldv | (uint32_t)value; + break; + case REG_CLR: + if (!imx6ul_lcdif_reg_has_setclr(reg)) { + return; + } + s->regs[idx] = oldv & ~(uint32_t)value; + break; + case REG_TOG: + if (!imx6ul_lcdif_reg_has_setclr(reg)) { + return; + } + s->regs[idx] = oldv ^ (uint32_t)value; + break; + default: + g_assert_not_reached(); + } + + switch (reg) { + case A_CTRL: + if (!FIELD_EX32(oldv, CTRL, RUN) && + FIELD_EX32(s->regs[idx], CTRL, RUN)) { + s->invalidate = true; + graphic_hw_invalidate(s->con); + imx6ul_lcdif_maybe_schedule_frame(s); + break; + } + if (FIELD_EX32(oldv, CTRL, RUN) && + !FIELD_EX32(s->regs[idx], CTRL, RUN)) { + timer_del(s->frame_timer); + } + break; + case A_CTRL1: + if (FIELD_EX32(oldv, CTRL1, CUR_FRAME_DONE_IRQ) && + !FIELD_EX32(s->regs[idx], CTRL1, CUR_FRAME_DONE_IRQ)) { + imx6ul_lcdif_maybe_schedule_frame(s); + } + break; + case A_V4_TRANSFER_COUNT: + s->invalidate = true; + graphic_hw_invalidate(s->con); + break; + case A_V4_CUR_BUF: + s->invalidate = true; + graphic_hw_invalidate(s->con); + break; + case A_V4_NEXT_BUF: + s->regs[IMX6UL_LCDIF_REG_V4_CUR_BUF] = s->regs[idx]; + imx6ul_lcdif_frame_done(s); + s->invalidate = true; + graphic_hw_invalidate(s->con); + imx6ul_lcdif_maybe_schedule_frame(s); + return; + case A_AS_NEXT_BUF: + imx6ul_lcdif_frame_done(s); + imx6ul_lcdif_maybe_schedule_frame(s); + return; + default: + break; + } + + imx6ul_lcdif_update_irq(s); +} + +static const MemoryRegionOps imx6ul_lcdif_ops = { + .read = imx6ul_lcdif_read, + .write = imx6ul_lcdif_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static void imx6ul_lcdif_reset(DeviceState *dev) +{ + IMX6ULLCDIFState *s = IMX6UL_LCDIF(dev); + + memset(s->regs, 0, sizeof(s->regs)); + s->regs[IMX6UL_LCDIF_REG_CTRL1] = LCDIF_RESET_CTRL1; + s->fb_base = 0; + s->src_width = 0; + s->rows = 0; + s->src_bpp = 0; + s->invalidate = true; + timer_del(s->frame_timer); + imx6ul_lcdif_update_irq(s); +} + +static int imx6ul_lcdif_post_load(void *opaque, int version_id) +{ + IMX6ULLCDIFState *s = opaque; + + s->fb_base = 0; + s->src_width = 0; + s->rows = 0; + s->src_bpp = 0; + s->invalidate = true; + + imx6ul_lcdif_update_irq(s); + if (imx6ul_lcdif_is_running(s) && + !imx6ul_lcdif_frame_done_pending(s) && + !timer_pending(s->frame_timer)) { + imx6ul_lcdif_schedule_frame(s); + } + + return 0; +} + +static const VMStateDescription vmstate_imx6ul_lcdif = { + .name = TYPE_IMX6UL_LCDIF, + .version_id = 1, + .minimum_version_id = 1, + .post_load = imx6ul_lcdif_post_load, + .fields = (const VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, IMX6ULLCDIFState, IMX6UL_LCDIF_REGS_NUM), + VMSTATE_TIMER_PTR(frame_timer, IMX6ULLCDIFState), + VMSTATE_END_OF_LIST() + }, +}; + +static void imx6ul_lcdif_realize(DeviceState *dev, Error **errp) +{ + IMX6ULLCDIFState *s = IMX6UL_LCDIF(dev); + + s->frame_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, + imx6ul_lcdif_frame_timer_cb, s); + s->invalidate = true; + memory_region_init_io(&s->iomem, OBJECT(dev), &imx6ul_lcdif_ops, s, + TYPE_IMX6UL_LCDIF, LCDIF_MMIO_SIZE); + sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->iomem); + sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq); + s->con = graphic_console_init(dev, 0, &imx6ul_lcdif_graphic_ops, s); +} + +static void imx6ul_lcdif_unrealize(DeviceState *dev) +{ + IMX6ULLCDIFState *s = IMX6UL_LCDIF(dev); + + timer_del(s->frame_timer); + timer_free(s->frame_timer); + s->frame_timer = NULL; + + if (s->con) { + graphic_console_close(s->con); + s->con = NULL; + } +} + +static void imx6ul_lcdif_class_init(ObjectClass *klass, const void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = imx6ul_lcdif_realize; + dc->unrealize = imx6ul_lcdif_unrealize; + dc->vmsd = &vmstate_imx6ul_lcdif; + device_class_set_legacy_reset(dc, imx6ul_lcdif_reset); + dc->desc = "i.MX6UL LCDIF"; +} + +static const TypeInfo imx6ul_lcdif_info = { + .name = TYPE_IMX6UL_LCDIF, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(IMX6ULLCDIFState), + .class_init = imx6ul_lcdif_class_init, +}; + +static void imx6ul_lcdif_register_types(void) +{ + type_register_static(&imx6ul_lcdif_info); +} + +type_init(imx6ul_lcdif_register_types) diff --git a/hw/display/meson.build b/hw/display/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/display/meson.build +++ b/hw/display/meson.build @@ -XXX,XX +XXX,XX @@ system_ss.add(when: ['CONFIG_VGA_CIRRUS', 'CONFIG_VGA_ISA'], if_true: files('cir system_ss.add(when: 'CONFIG_G364FB', if_true: files('g364fb.c')) system_ss.add(when: 'CONFIG_JAZZ_LED', if_true: files('jazz_led.c')) system_ss.add(when: 'CONFIG_PL110', if_true: files('pl110.c')) +system_ss.add(when: 'CONFIG_IMX6UL_LCDIF', if_true: files('imx6ul_lcdif.c')) system_ss.add(when: 'CONFIG_SII9022', if_true: files('sii9022.c')) system_ss.add(when: 'CONFIG_SSD0303', if_true: files('ssd0303.c')) system_ss.add(when: 'CONFIG_SSD0323', if_true: files('ssd0323.c')) diff --git a/include/hw/display/imx6ul_lcdif.h b/include/hw/display/imx6ul_lcdif.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/display/imx6ul_lcdif.h @@ -XXX,XX +XXX,XX @@ +/* + * SPDX-License-Identifier: GPL-2.0-or-later + * + * i.MX6UL LCDIF controller + * + * Copyright (c) 2026 Yucai Liu <1486344514@qq.com> + */ + +#ifndef IMX6UL_LCDIF_H +#define IMX6UL_LCDIF_H + +#include "hw/core/sysbus.h" +#include "qom/object.h" +#include "qemu/timer.h" +#include "ui/console.h" + +#define TYPE_IMX6UL_LCDIF "imx6ul-lcdif" +#define IMX6UL_LCDIF_REGS_NUM ((0x230 >> 4) + 1) +OBJECT_DECLARE_SIMPLE_TYPE(IMX6ULLCDIFState, IMX6UL_LCDIF) + +struct IMX6ULLCDIFState { + SysBusDevice parent_obj; + + MemoryRegion iomem; + MemoryRegionSection fbsection; + qemu_irq irq; + QemuConsole *con; + QEMUTimer *frame_timer; + uint32_t fb_base; + uint32_t src_width; + uint32_t rows; + uint8_t src_bpp; + bool invalidate; + uint32_t regs[IMX6UL_LCDIF_REGS_NUM]; +}; + +#endif /* IMX6UL_LCDIF_H */ -- 2.43.0 From: Yucai Liu <1486344514@qq.com> Instantiate LCDIF as a child object of the i.MX6UL SoC in init and realize it in the SoC realize path before MMIO/IRQ hookup. Also make FSL_IMX6UL select CONFIG_IMX6UL_LCDIF and map the LCDIF region with a 16 KiB size to match the SoC memory map. Signed-off-by: Yucai Liu <1486344514@qq.com> Message-id: 20260412110240.93116-3-yangyanglan718@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx6ul.c | 12 ++++++++++-- include/hw/arm/fsl-imx6ul.h | 4 +++- 3 files changed, 14 insertions(+), 3 deletions(-) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX6UL imply I2C_DEVICES select A15MPCORE select IMX + select IMX6UL_LCDIF select IMX_FEC select IMX_I2C select IMX_USBPHY diff --git a/hw/arm/fsl-imx6ul.c b/hw/arm/fsl-imx6ul.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx6ul.c +++ b/hw/arm/fsl-imx6ul.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qapi/error.h" #include "hw/arm/fsl-imx6ul.h" +#include "hw/display/imx6ul_lcdif.h" #include "hw/misc/unimp.h" #include "hw/usb/imx-usb-phy.h" #include "hw/core/boards.h" @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) object_initialize_child(obj, name, &s->usb[i], TYPE_CHIPIDEA); } + /* + * LCDIF + */ + object_initialize_child(obj, "lcdif", &s->lcdif, TYPE_IMX6UL_LCDIF); + /* * SDHCIs */ @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) /* * LCD */ - create_unimplemented_device("lcdif", FSL_IMX6UL_LCDIF_ADDR, - FSL_IMX6UL_LCDIF_SIZE); + sysbus_realize(SYS_BUS_DEVICE(&s->lcdif), &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->lcdif), 0, FSL_IMX6UL_LCDIF_ADDR); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->lcdif), 0, + qdev_get_gpio_in(gic, FSL_IMX6UL_LCDIF_IRQ)); /* * CSU diff --git a/include/hw/arm/fsl-imx6ul.h b/include/hw/arm/fsl-imx6ul.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx6ul.h +++ b/include/hw/arm/fsl-imx6ul.h @@ -XXX,XX +XXX,XX @@ #include "hw/net/imx_fec.h" #include "hw/usb/chipidea.h" #include "hw/usb/imx-usb-phy.h" +#include "hw/display/imx6ul_lcdif.h" #include "system/memory.h" #include "target/arm/cpu.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct FslIMX6ULState { IMX2WdtState wdt[FSL_IMX6UL_NUM_WDTS]; IMXUSBPHYState usbphy[FSL_IMX6UL_NUM_USB_PHYS]; ChipideaState usb[FSL_IMX6UL_NUM_USBS]; + IMX6ULLCDIFState lcdif; MemoryRegion rom; MemoryRegion caam; MemoryRegion ocram; @@ -XXX,XX +XXX,XX @@ enum FslIMX6ULMemoryMap { FSL_IMX6UL_PXP_SIZE = (16 * KiB), FSL_IMX6UL_LCDIF_ADDR = 0x021C8000, - FSL_IMX6UL_LCDIF_SIZE = 0x100, + FSL_IMX6UL_LCDIF_SIZE = (16 * KiB), FSL_IMX6UL_CSI_ADDR = 0x021C4000, FSL_IMX6UL_CSI_SIZE = 0x100, -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> We have a registerfields interface which we can use for defining fields alongside helpers to access them. Define the basic syndrome layout and convert the helpers that take the imm16 data directly. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-2-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 75 ++++++++++++++++++++++++++++++++----------- 1 file changed, 57 insertions(+), 18 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ #ifndef TARGET_ARM_SYNDROME_H #define TARGET_ARM_SYNDROME_H -#include "qemu/bitops.h" +#include "hw/core/registerfields.h" /* Valid Syndrome Register EC field values */ enum arm_exception_class { @@ -XXX,XX +XXX,XX @@ enum arm_exception_class { EC_AA64_BKPT = 0x3c, }; +/* Generic syndrome encoding layout for HSR and lower 32 bits of ESR_EL2 */ +FIELD(SYNDROME, EC, 26, 6) +FIELD(SYNDROME, IL, 25, 1) +FIELD(SYNDROME, ISS, 0, 25) + typedef enum { SME_ET_AccessTrap, SME_ET_Streaming, @@ -XXX,XX +XXX,XX @@ typedef enum { static inline uint32_t syn_get_ec(uint32_t syn) { - return syn >> ARM_EL_EC_SHIFT; + return FIELD_EX32(syn, SYNDROME, EC); } static inline uint32_t syn_set_ec(uint32_t syn, uint32_t ec) { - return deposit32(syn, ARM_EL_EC_SHIFT, ARM_EL_EC_LENGTH, ec); + return FIELD_DP32(syn, SYNDROME, EC, ec); } /* @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_set_ec(uint32_t syn, uint32_t ec) */ static inline uint32_t syn_uncategorized(void) { - return (EC_UNCATEGORIZED << ARM_EL_EC_SHIFT) | ARM_EL_IL; + uint32_t res = syn_set_ec(0, EC_UNCATEGORIZED); + res = FIELD_DP32(res, SYNDROME, IL, 1); + return res; } +FIELD(ISS_IMM16, IMM16, 0, 16) + static inline uint32_t syn_aa64_svc(uint32_t imm16) { - return (EC_AA64_SVC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); + uint32_t res = syn_set_ec(0, EC_AA64_SVC); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); + return res; } static inline uint32_t syn_aa64_hvc(uint32_t imm16) { - return (EC_AA64_HVC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); + uint32_t res = syn_set_ec(0, EC_AA64_HVC); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); + return res; } static inline uint32_t syn_aa64_smc(uint32_t imm16) { - return (EC_AA64_SMC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); + uint32_t res = syn_set_ec(0, EC_AA64_SMC); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); + return res; } static inline uint32_t syn_aa32_svc(uint32_t imm16, bool is_16bit) { - return (EC_AA32_SVC << ARM_EL_EC_SHIFT) | (imm16 & 0xffff) - | (is_16bit ? 0 : ARM_EL_IL); + uint32_t res = syn_set_ec(0, EC_AA32_SVC); + res = FIELD_DP32(res, SYNDROME, IL, is_16bit ? 0 : 1); + res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); + return res; } static inline uint32_t syn_aa32_hvc(uint32_t imm16) { - return (EC_AA32_HVC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); + uint32_t res = syn_set_ec(0, EC_AA32_HVC); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); + return res; } static inline uint32_t syn_aa32_smc(void) { - return (EC_AA32_SMC << ARM_EL_EC_SHIFT) | ARM_EL_IL; + uint32_t res = syn_set_ec(0, EC_AA32_SMC); + res = FIELD_DP32(res, SYNDROME, IL, 1); + return res; } static inline uint32_t syn_aa64_bkpt(uint32_t imm16) { - return (EC_AA64_BKPT << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); + uint32_t res = syn_set_ec(0, EC_AA64_BKPT); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); + return res; } static inline uint32_t syn_aa32_bkpt(uint32_t imm16, bool is_16bit) { - return (EC_AA32_BKPT << ARM_EL_EC_SHIFT) | (imm16 & 0xffff) - | (is_16bit ? 0 : ARM_EL_IL); + uint32_t res = syn_set_ec(0, EC_AA32_BKPT); + res = FIELD_DP32(res, SYNDROME, IL, is_16bit ? 0 : 1); + res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); + return res; } static inline uint32_t syn_aa64_sysregtrap(int op0, int op1, int op2, @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_simd_access_trap(int cv, int cond, bool is_16bit) static inline uint32_t syn_sve_access_trap(void) { - return (EC_SVEACCESSTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL; + uint32_t res = syn_set_ec(0, EC_SVEACCESSTRAP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + return res; } /* @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit) static inline uint32_t syn_illegalstate(void) { - return (EC_ILLEGALSTATE << ARM_EL_EC_SHIFT) | ARM_EL_IL; + uint32_t res = syn_set_ec(0, EC_ILLEGALSTATE); + res = FIELD_DP32(res, SYNDROME, IL, 1); + return res; } static inline uint32_t syn_pcalignment(void) { - return (EC_PCALIGNMENT << ARM_EL_EC_SHIFT) | ARM_EL_IL; + uint32_t res = syn_set_ec(0, EC_PCALIGNMENT); + res = FIELD_DP32(res, SYNDROME, IL, 1); + return res; } static inline uint32_t syn_gcs_data_check(GCSInstructionType it, int rn) @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_gcs_gcsstr(int ra, int rn) static inline uint32_t syn_serror(uint32_t extra) { - return (EC_SERROR << ARM_EL_EC_SHIFT) | ARM_EL_IL | extra; + uint32_t res = syn_set_ec(0, EC_SERROR); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, SYNDROME, ISS, extra); + return res; } static inline uint32_t syn_mop(bool is_set, bool is_setg, int options, -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Migrate syn_aa64_sysregtrap and co-processor register trap syndromes to the registerfields API. The co-processor syndromes are split between single and duel register moves. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-3-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 124 ++++++++++++++++++++++++++++++++++-------- 1 file changed, 102 insertions(+), 22 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ enum arm_exception_class { /* Generic syndrome encoding layout for HSR and lower 32 bits of ESR_EL2 */ FIELD(SYNDROME, EC, 26, 6) -FIELD(SYNDROME, IL, 25, 1) +FIELD(SYNDROME, IL, 25, 1) /* IL=1 for 32 bit instructions */ FIELD(SYNDROME, ISS, 0, 25) typedef enum { @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_aa64_smc(uint32_t imm16) static inline uint32_t syn_aa32_svc(uint32_t imm16, bool is_16bit) { uint32_t res = syn_set_ec(0, EC_AA32_SVC); - res = FIELD_DP32(res, SYNDROME, IL, is_16bit ? 0 : 1); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); return res; } @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_aa64_bkpt(uint32_t imm16) static inline uint32_t syn_aa32_bkpt(uint32_t imm16, bool is_16bit) { uint32_t res = syn_set_ec(0, EC_AA32_BKPT); - res = FIELD_DP32(res, SYNDROME, IL, is_16bit ? 0 : 1); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); return res; } +/* + * ISS encoding for an exception from MSR, MRS, or System instruction + * in AArch64 state. + */ +FIELD(SYSREG_ISS, ISREAD, 0, 1) /* Direction, 1 is read */ +FIELD(SYSREG_ISS, CRM, 1, 4) +FIELD(SYSREG_ISS, RT, 5, 5) +FIELD(SYSREG_ISS, CRN, 10, 4) +FIELD(SYSREG_ISS, OP1, 14, 3) +FIELD(SYSREG_ISS, OP2, 17, 3) +FIELD(SYSREG_ISS, OP0, 20, 2) + static inline uint32_t syn_aa64_sysregtrap(int op0, int op1, int op2, int crn, int crm, int rt, int isread) { - return (EC_SYSTEMREGISTERTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL - | (op0 << 20) | (op2 << 17) | (op1 << 14) | (crn << 10) | (rt << 5) - | (crm << 1) | isread; + uint32_t res = syn_set_ec(0, EC_SYSTEMREGISTERTRAP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, SYSREG_ISS, OP0, op0); + res = FIELD_DP32(res, SYSREG_ISS, OP2, op2); + res = FIELD_DP32(res, SYSREG_ISS, OP1, op1); + res = FIELD_DP32(res, SYSREG_ISS, CRN, crn); + res = FIELD_DP32(res, SYSREG_ISS, RT, rt); + res = FIELD_DP32(res, SYSREG_ISS, CRM, crm); + res = FIELD_DP32(res, SYSREG_ISS, ISREAD, isread); + + return res; } +/* + * ISS encoding for an exception from an MCR or MRC access + * (move to/from co-processor) + */ +FIELD(COPROC_ISS, ISREAD, 0, 1) +FIELD(COPROC_ISS, CRM, 1, 4) +FIELD(COPROC_ISS, RT, 5, 5) +FIELD(COPROC_ISS, CRN, 10, 4) +FIELD(COPROC_ISS, OP1, 14, 3) +FIELD(COPROC_ISS, OP2, 17, 3) +FIELD(COPROC_ISS, COND, 20, 4) +FIELD(COPROC_ISS, CV, 24, 1) + static inline uint32_t syn_cp14_rt_trap(int cv, int cond, int opc1, int opc2, int crn, int crm, int rt, int isread, bool is_16bit) { - return (EC_CP14RTTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | (opc2 << 17) | (opc1 << 14) - | (crn << 10) | (rt << 5) | (crm << 1) | isread; + uint32_t res = syn_set_ec(0, EC_CP14RTTRAP); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); + + res = FIELD_DP32(res, COPROC_ISS, CV, cv); + res = FIELD_DP32(res, COPROC_ISS, COND, cond); + res = FIELD_DP32(res, COPROC_ISS, OP2, opc2); + res = FIELD_DP32(res, COPROC_ISS, OP1, opc1); + res = FIELD_DP32(res, COPROC_ISS, CRN, crn); + res = FIELD_DP32(res, COPROC_ISS, RT, rt); + res = FIELD_DP32(res, COPROC_ISS, CRM, crm); + res = FIELD_DP32(res, COPROC_ISS, ISREAD, isread); + + return res; } static inline uint32_t syn_cp15_rt_trap(int cv, int cond, int opc1, int opc2, int crn, int crm, int rt, int isread, bool is_16bit) { - return (EC_CP15RTTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | (opc2 << 17) | (opc1 << 14) - | (crn << 10) | (rt << 5) | (crm << 1) | isread; + uint32_t res = syn_set_ec(0, EC_CP15RTTRAP); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); + + res = FIELD_DP32(res, COPROC_ISS, CV, cv); + res = FIELD_DP32(res, COPROC_ISS, COND, cond); + res = FIELD_DP32(res, COPROC_ISS, OP2, opc2); + res = FIELD_DP32(res, COPROC_ISS, OP1, opc1); + res = FIELD_DP32(res, COPROC_ISS, CRN, crn); + res = FIELD_DP32(res, COPROC_ISS, RT, rt); + res = FIELD_DP32(res, COPROC_ISS, CRM, crm); + res = FIELD_DP32(res, COPROC_ISS, ISREAD, isread); + + return res; } +/* + * ISS encoding for an exception from an MCRR or MRRC access + * (move to/from co-processor with 2 regs) + */ +FIELD(COPROC_R2_ISS, ISREAD, 0, 1) +FIELD(COPROC_R2_ISS, CRM, 1, 4) +FIELD(COPROC_R2_ISS, RT, 5, 5) +FIELD(COPROC_R2_ISS, RT2, 10, 5) +FIELD(COPROC_R2_ISS, OP1, 16, 4) +FIELD(COPROC_R2_ISS, COND, 20, 4) +FIELD(COPROC_R2_ISS, CV, 24, 1) + static inline uint32_t syn_cp14_rrt_trap(int cv, int cond, int opc1, int crm, int rt, int rt2, int isread, bool is_16bit) { - return (EC_CP14RRTTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | (opc1 << 16) - | (rt2 << 10) | (rt << 5) | (crm << 1) | isread; + uint32_t res = syn_set_ec(0, EC_CP14RRTTRAP); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); + + res = FIELD_DP32(res, COPROC_R2_ISS, CV, cv); + res = FIELD_DP32(res, COPROC_R2_ISS, COND, cond); + res = FIELD_DP32(res, COPROC_R2_ISS, OP1, opc1); + res = FIELD_DP32(res, COPROC_R2_ISS, RT2, rt2); + res = FIELD_DP32(res, COPROC_R2_ISS, RT, rt); + res = FIELD_DP32(res, COPROC_R2_ISS, CRM, crm); + res = FIELD_DP32(res, COPROC_R2_ISS, ISREAD, isread); + + return res; } static inline uint32_t syn_cp15_rrt_trap(int cv, int cond, int opc1, int crm, int rt, int rt2, int isread, bool is_16bit) { - return (EC_CP15RRTTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | (opc1 << 16) - | (rt2 << 10) | (rt << 5) | (crm << 1) | isread; + uint32_t res = syn_set_ec(0, EC_CP15RRTTRAP); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); + + res = FIELD_DP32(res, COPROC_R2_ISS, CV, cv); + res = FIELD_DP32(res, COPROC_R2_ISS, COND, cond); + res = FIELD_DP32(res, COPROC_R2_ISS, OP1, opc1); + res = FIELD_DP32(res, COPROC_R2_ISS, RT2, rt2); + res = FIELD_DP32(res, COPROC_R2_ISS, RT, rt); + res = FIELD_DP32(res, COPROC_R2_ISS, CRM, crm); + res = FIELD_DP32(res, COPROC_R2_ISS, ISREAD, isread); + + return res; } static inline uint32_t syn_fp_access_trap(int cv, int cond, bool is_16bit, -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> The syn_simd_access trap was never used so remove it. We should only see the COPROC encoding on v7 architectures. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-4-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 25 +++++++++++++++---------- 1 file changed, 15 insertions(+), 10 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_cp15_rrt_trap(int cv, int cond, int opc1, int crm, return res; } +/* + * ISS encoding for an exception from an access to a register of + * instruction resulting from the FPEN or TFP traps. + */ +FIELD(FP_ISS, COPROC, 0, 4) /* ARMv7 only */ +FIELD(FP_ISS, COND, 20, 4) +FIELD(FP_ISS, CV, 24, 1) + static inline uint32_t syn_fp_access_trap(int cv, int cond, bool is_16bit, int coproc) { /* AArch32 FP trap or any AArch64 FP/SIMD trap: TA == 0 */ - return (EC_ADVSIMDFPACCESSTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | coproc; -} + uint32_t res = syn_set_ec(0, EC_ADVSIMDFPACCESSTRAP); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); -static inline uint32_t syn_simd_access_trap(int cv, int cond, bool is_16bit) -{ - /* AArch32 SIMD trap: TA == 1 coproc == 0 */ - return (EC_ADVSIMDFPACCESSTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | (1 << 5); + res = FIELD_DP32(res, FP_ISS, CV, cv); + res = FIELD_DP32(res, FP_ISS, COND, cond); + res = FIELD_DP32(res, FP_ISS, COPROC, coproc); + + return res; } static inline uint32_t syn_sve_access_trap(void) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> For simplicity keep the OP as a two bit field rather than the two interlinked fields in the docs (ERET/ERETA). Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-5-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_sve_access_trap(void) } /* + * ISS encoding for an exception from an ERET, ERETAA or ERETAB + * instructions. + * * eret_op is bits [1:0] of the ERET instruction, so: * 0 for ERET, 2 for ERETAA, 3 for ERETAB. */ +FIELD(ERET_ISS, OP, 0, 2) + static inline uint32_t syn_erettrap(int eret_op) { - return (EC_ERETTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL | eret_op; + uint32_t res = syn_set_ec(0, EC_ERETTRAP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, ERET_ISS, OP, eret_op); + + return res; } static inline uint32_t syn_smetrap(SMEExceptionType etype, bool is_16bit) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-6-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_erettrap(int eret_op) return res; } +/* + * ISS encoding for an exception due to SME functionality + */ +FIELD(SME_ISS, SMTC, 0, 2) + static inline uint32_t syn_smetrap(SMEExceptionType etype, bool is_16bit) { - return (EC_SMETRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) | etype; + uint32_t res = syn_set_ec(0, EC_SMETRAP); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); + res = FIELD_DP32(res, SME_ISS, SMTC, etype); + + return res; } static inline uint32_t syn_pacfail(bool data, int keynumber) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> syn_pactrap is fairly simple as the ISS is all RES0. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-7-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 23 ++++++++++++++++++++--- 1 file changed, 20 insertions(+), 3 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_smetrap(SMEExceptionType etype, bool is_16bit) return res; } +/* + * ISS encoding for a PAC Fail exceptions + */ +FIELD(PACFAIL_ISS, BnA, 0, 1) /* B key or A key */ +FIELD(PACFAIL_ISS, DnI, 1, 1) /* Data or Instruction */ + static inline uint32_t syn_pacfail(bool data, int keynumber) { - int error_code = (data << 1) | keynumber; - return (EC_PACFAIL << ARM_EL_EC_SHIFT) | ARM_EL_IL | error_code; + uint32_t res = syn_set_ec(0, EC_PACFAIL); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, PACFAIL_ISS, DnI, data); + res = FIELD_DP32(res, PACFAIL_ISS, BnA, keynumber); + + return res; } +/* + * ISS encoding for an exception from a trapped Pointer + * Authentication instruction is RES0 + */ static inline uint32_t syn_pactrap(void) { - return (EC_PACTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL; + uint32_t res = syn_set_ec(0, EC_PACTRAP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + return res; } static inline uint32_t syn_btitrap(int btype) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-8-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_pactrap(void) return res; } +/* + * ISS encoding for an exception from a Branch Target Identification + * instruction. + */ +FIELD(BTI_ISS, BTYPE, 0, 2) + static inline uint32_t syn_btitrap(int btype) { - return (EC_BTITRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL | btype; + uint32_t res = syn_set_ec(0, EC_BTITRAP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, BTI_ISS, BTYPE, btype); + return res; } static inline uint32_t syn_bxjtrap(int cv, int cond, int rm) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> This is an Armv7 specific syndrome for chips with Jazelle functionality. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-9-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_btitrap(int btype) return res; } +/* + * ISS encoding for trapped BXJ execution + * + * This is an Armv7 encoding. + */ +FIELD(BXJ_ISS, RM, 0, 4) +/* bits 4:19 are Reserved, UNK/SBZP */ +FIELD(BXJ_ISS, COND, 20, 4) +FIELD(BXJ_ISS, CV, 24, 1) + static inline uint32_t syn_bxjtrap(int cv, int cond, int rm) { - return (EC_BXJTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL | - (cv << 24) | (cond << 20) | rm; + uint32_t res = syn_set_ec(0, EC_BXJTRAP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, BXJ_ISS, CV, cv); + res = FIELD_DP32(res, BXJ_ISS, COND, cond); + res = FIELD_DP32(res, BXJ_ISS, RM, rm); + + return res; } static inline uint32_t syn_gpc(int s2ptw, int ind, int gpcsc, int vncr, -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-10-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 30 +++++++++++++++++++++++++++--- 1 file changed, 27 insertions(+), 3 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_bxjtrap(int cv, int cond, int rm) return res; } +/* + * ISS encoding for a Granule Protection Check exception + * + * These are only reported to EL3 + */ +FIELD(GPC_ISS, xFSC, 0, 6) +FIELD(GPC_ISS, WnR, 6, 1) /* Write not Read */ +FIELD(GPC_ISS, S1PTW, 7, 1) +FIELD(GPC_ISS, CM, 8, 1) +FIELD(GPC_ISS, VNCR, 13, 1) +FIELD(GPC_ISS, GPCSC, 14, 6) +FIELD(GPC_ISS, InD, 20, 1) /* Instruction not Data access */ +FIELD(GPC_ISS, S2PTW, 21, 1) + static inline uint32_t syn_gpc(int s2ptw, int ind, int gpcsc, int vncr, int cm, int s1ptw, int wnr, int fsc) { - return (EC_GPC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (s2ptw << 21) - | (ind << 20) | (gpcsc << 14) | (vncr << 13) | (cm << 8) - | (s1ptw << 7) | (wnr << 6) | fsc; + uint32_t res = syn_set_ec(0, EC_GPC); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, GPC_ISS, S2PTW, s2ptw); + res = FIELD_DP32(res, GPC_ISS, InD, ind); + res = FIELD_DP32(res, GPC_ISS, GPCSC, gpcsc); + res = FIELD_DP32(res, GPC_ISS, VNCR, vncr); + res = FIELD_DP32(res, GPC_ISS, CM, cm); + res = FIELD_DP32(res, GPC_ISS, S1PTW, s1ptw); + res = FIELD_DP32(res, GPC_ISS, WnR, wnr); + res = FIELD_DP32(res, GPC_ISS, xFSC, fsc); + + return res; } static inline uint32_t syn_insn_abort(int same_el, int ea, int s1ptw, int fsc) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Migrate syn_insn_abort and syn_data_abort_* to the registerfields API. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20260422125250.1303100-11-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 87 ++++++++++++++++++++++++++++++++++++------- 1 file changed, 74 insertions(+), 13 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_gpc(int s2ptw, int ind, int gpcsc, int vncr, return res; } +/* + * ISS encoding for an exception from an Instruction Abort + * + * (aka instruction abort) + */ +FIELD(IABORT_ISS, IFSC, 0, 6) +FIELD(IABORT_ISS, S1PTW, 7, 1) +FIELD(IABORT_ISS, EA, 9, 1) +FIELD(IABORT_ISS, FnV, 10, 1) /* FAR not Valid */ +FIELD(IABORT_ISS, SET, 11, 2) +FIELD(IABORT_ISS, PFV, 14, 1) +FIELD(IABORT_ISS, TopLevel, 21, 1) /* FEAT_THE */ + static inline uint32_t syn_insn_abort(int same_el, int ea, int s1ptw, int fsc) { - return (EC_INSNABORT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | ARM_EL_IL | (ea << 9) | (s1ptw << 7) | fsc; + uint32_t res = syn_set_ec(0, EC_INSNABORT + same_el); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, IABORT_ISS, EA, ea); + res = FIELD_DP32(res, IABORT_ISS, S1PTW, s1ptw); + res = FIELD_DP32(res, IABORT_ISS, IFSC, fsc); + + return res; } +/* + * ISS encoding for an exception from a Data Abort + */ +FIELD(DABORT_ISS, DFSC, 0, 6) +FIELD(DABORT_ISS, WNR, 6, 1) +FIELD(DABORT_ISS, S1PTW, 7, 1) +FIELD(DABORT_ISS, CM, 8, 1) +FIELD(DABORT_ISS, EA, 9, 1) +FIELD(DABORT_ISS, FnV, 10, 1) +FIELD(DABORT_ISS, LST, 11, 2) +FIELD(DABORT_ISS, VNCR, 13, 1) +FIELD(DABORT_ISS, AR, 14, 1) +FIELD(DABORT_ISS, SF, 15, 1) +FIELD(DABORT_ISS, SRT, 16, 5) +FIELD(DABORT_ISS, SSE, 21, 1) +FIELD(DABORT_ISS, SAS, 22, 2) +FIELD(DABORT_ISS, ISV, 24, 1) + static inline uint32_t syn_data_abort_no_iss(int same_el, int fnv, int ea, int cm, int s1ptw, int wnr, int fsc) { - return (EC_DATAABORT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | ARM_EL_IL - | (fnv << 10) | (ea << 9) | (cm << 8) | (s1ptw << 7) - | (wnr << 6) | fsc; + uint32_t res = syn_set_ec(0, EC_DATAABORT + same_el); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, DABORT_ISS, FnV, fnv); + res = FIELD_DP32(res, DABORT_ISS, EA, ea); + res = FIELD_DP32(res, DABORT_ISS, CM, cm); + res = FIELD_DP32(res, DABORT_ISS, S1PTW, s1ptw); + res = FIELD_DP32(res, DABORT_ISS, WNR, wnr); + res = FIELD_DP32(res, DABORT_ISS, DFSC, fsc); + + return res; } static inline uint32_t syn_data_abort_with_iss(int same_el, @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_data_abort_with_iss(int same_el, int wnr, int fsc, bool is_16bit) { - return (EC_DATAABORT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | ARM_EL_ISV | (sas << 22) | (sse << 21) | (srt << 16) - | (sf << 15) | (ar << 14) - | (ea << 9) | (cm << 8) | (s1ptw << 7) | (wnr << 6) | fsc; + uint32_t res = syn_set_ec(0, EC_DATAABORT + same_el); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); + + res = FIELD_DP32(res, DABORT_ISS, ISV, 1); + res = FIELD_DP32(res, DABORT_ISS, SAS, sas); + res = FIELD_DP32(res, DABORT_ISS, SSE, sse); + res = FIELD_DP32(res, DABORT_ISS, SRT, srt); + res = FIELD_DP32(res, DABORT_ISS, SF, sf); + res = FIELD_DP32(res, DABORT_ISS, AR, ar); + res = FIELD_DP32(res, DABORT_ISS, EA, ea); + res = FIELD_DP32(res, DABORT_ISS, CM, cm); + res = FIELD_DP32(res, DABORT_ISS, S1PTW, s1ptw); + res = FIELD_DP32(res, DABORT_ISS, WNR, wnr); + res = FIELD_DP32(res, DABORT_ISS, DFSC, fsc); + + return res; } /* @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_data_abort_with_iss(int same_el, */ static inline uint32_t syn_data_abort_vncr(int ea, int wnr, int fsc) { - return (EC_DATAABORT << ARM_EL_EC_SHIFT) | (1 << ARM_EL_EC_SHIFT) - | ARM_EL_IL | ARM_EL_VNCR | (wnr << 6) | fsc; + uint32_t res = syn_set_ec(0, EC_DATAABORT_SAME_EL); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, DABORT_ISS, VNCR, 1); + res = FIELD_DP32(res, DABORT_ISS, WNR, wnr); + res = FIELD_DP32(res, DABORT_ISS, DFSC, fsc); + + return res; } static inline uint32_t syn_swstep(int same_el, int isv, int ex) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Migrate syn_swstep, syn_watchpoint and syn_breakpoint to the registerfields API. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-12-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 54 ++++++++++++++++++++++++++++++++++++++----- 1 file changed, 48 insertions(+), 6 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_data_abort_vncr(int ea, int wnr, int fsc) return res; } +/* + * ISS encoding for an exception from a Software Step exception. + */ +FIELD(SOFTSTEP_ISS, IFSC, 0, 6) +FIELD(SOFTSTEP_ISS, EX, 6, 1) +FIELD(SOFTSTEP_ISS, ISV, 24, 1) + static inline uint32_t syn_swstep(int same_el, int isv, int ex) { - return (EC_SOFTWARESTEP << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | ARM_EL_IL | (isv << 24) | (ex << 6) | 0x22; + uint32_t res = syn_set_ec(0, EC_SOFTWARESTEP + same_el); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, SOFTSTEP_ISS, ISV, isv); + res = FIELD_DP32(res, SOFTSTEP_ISS, EX, ex); + res = FIELD_DP32(res, SOFTSTEP_ISS, IFSC, 0x22); + + return res; } +/* + * ISS encoding for an exception from a Watchpoint exception + */ +FIELD(WATCHPOINT_ISS, DFSC, 0, 6) +FIELD(WATCHPOINT_ISS, WNR, 6, 1) +FIELD(WATCHPOINT_ISS, CM, 8, 1) +FIELD(WATCHPOINT_ISS, FnV, 10, 1) +FIELD(WATCHPOINT_ISS, VNCR, 13, 1) /* FEAT_NV2 */ +FIELD(WATCHPOINT_ISS, FnP, 15, 1) +FIELD(WATCHPOINT_ISS, WPF, 16, 1) +/* bellow mandatory from FEAT_Debugv8p9 */ +FIELD(WATCHPOINT_ISS, WPTV, 17, 1) /* FEAT_Debugv8p2 - WPT valid */ +FIELD(WATCHPOINT_ISS, WPT, 18, 6) /* FEAT_Debugv8p2 - missing WP number */ + static inline uint32_t syn_watchpoint(int same_el, int cm, int wnr) { - return (EC_WATCHPOINT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | ARM_EL_IL | (cm << 8) | (wnr << 6) | 0x22; + uint32_t res = syn_set_ec(0, EC_WATCHPOINT + same_el); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, WATCHPOINT_ISS, CM, cm); + res = FIELD_DP32(res, WATCHPOINT_ISS, WNR, wnr); + res = FIELD_DP32(res, WATCHPOINT_ISS, DFSC, 0x22); + + return res; } +/* + * ISS encoding for an exception from a Breakpoint or a Vector Catch + * debug exception. + */ +FIELD(BREAKPOINT_ISS, IFSC, 0, 6) + static inline uint32_t syn_breakpoint(int same_el) { - return (EC_BREAKPOINT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | ARM_EL_IL | 0x22; + uint32_t res = syn_set_ec(0, EC_BREAKPOINT + same_el); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, BREAKPOINT_ISS, IFSC, 0x22); + + return res; } static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> This will help later when we expand the fields we report. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-13-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_breakpoint(int same_el) return res; } +/* + * ISS encoding for an exception from a WF* instruction + */ +FIELD(WFX_ISS, TI, 0, 2) +FIELD(WFX_ISS, RV, 2, 1) +FIELD(WFX_ISS, RN, 5, 5) +FIELD(WFX_ISS, COND, 20, 4) +FIELD(WFX_ISS, CV, 24, 1) + static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit) { - return (EC_WFX_TRAP << ARM_EL_EC_SHIFT) | - (is_16bit ? 0 : (1 << ARM_EL_IL_SHIFT)) | - (cv << 24) | (cond << 20) | ti; + uint32_t res = syn_set_ec(0, EC_WFX_TRAP); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); + + res = FIELD_DP32(res, WFX_ISS, CV, cv); + res = FIELD_DP32(res, WFX_ISS, COND, cond); + res = FIELD_DP32(res, WFX_ISS, TI, ti); + + return res; } static inline uint32_t syn_illegalstate(void) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Tweak arg names to make it clear raddr is the data address register number. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-14-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 39 +++++++++++++++++++++++++++++++++------ 1 file changed, 33 insertions(+), 6 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_pcalignment(void) return res; } +/* + * ISS encoding for a GCS exception + * + * Field validity depends on EXTYPE + */ +FIELD(GCS_ISS, IT, 0, 5) +FIELD(GCS_ISS, RN, 5, 5) /* only for non EXLOCK exceptions */ +FIELD(GCS_ISS, RADDR, 10, 5) /* only for GCSSTR/GCSSTTR traps */ +FIELD(GCS_ISS, EXTYPE, 20, 4) + static inline uint32_t syn_gcs_data_check(GCSInstructionType it, int rn) { - return ((EC_GCS << ARM_EL_EC_SHIFT) | ARM_EL_IL | - (GCS_ET_DataCheck << 20) | (rn << 5) | it); + uint32_t res = syn_set_ec(0, EC_GCS); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, GCS_ISS, EXTYPE, GCS_ET_DataCheck); + res = FIELD_DP32(res, GCS_ISS, RN, rn); + res = FIELD_DP32(res, GCS_ISS, IT, it); + + return res; } static inline uint32_t syn_gcs_exlock(void) { - return (EC_GCS << ARM_EL_EC_SHIFT) | ARM_EL_IL | (GCS_ET_EXLOCK << 20); + uint32_t res = syn_set_ec(0, EC_GCS); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, GCS_ISS, EXTYPE, GCS_ET_EXLOCK); + + return res; } -static inline uint32_t syn_gcs_gcsstr(int ra, int rn) +static inline uint32_t syn_gcs_gcsstr(int raddr, int rn) { - return ((EC_GCS << ARM_EL_EC_SHIFT) | ARM_EL_IL | - (GCS_ET_GCSSTR_GCSSTTR << 20) | (ra << 10) | (rn << 5)); + uint32_t res = syn_set_ec(0, EC_GCS); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, GCS_ISS, EXTYPE, GCS_ET_GCSSTR_GCSSTTR); + res = FIELD_DP32(res, GCS_ISS, RADDR, raddr); + res = FIELD_DP32(res, GCS_ISS, RN, rn); + + return res; } static inline uint32_t syn_serror(uint32_t extra) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-15-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 33 +++++++++++++++++++++++++++++---- 1 file changed, 29 insertions(+), 4 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_serror(uint32_t extra) return res; } +/* + * ISS encoding for an exception from the Memory Copy and Memory Set + * instructions. + */ +FIELD(MOP_ISS, SIZEREG, 0, 5) +FIELD(MOP_ISS, SRCREG, 5, 5) +FIELD(MOP_ISS, DESTREG, 10, 5) +FIELD(MOP_ISS, FORMATOPT, 16, 2) +FIELD(MOP_ISS, OPT_A, 16, 1) +FIELD(MOP_ISS, WRONG_OPT, 17, 1) +FIELD(MOP_ISS, EPILOGUE, 18, 1) +FIELD(MOP_ISS, OPTIONS, 19, 4) +FIELD(MOP_ISS, IS_SETG, 23, 1) +FIELD(MOP_ISS, MEMINST, 24, 1) + static inline uint32_t syn_mop(bool is_set, bool is_setg, int options, bool epilogue, bool wrong_option, bool option_a, int destreg, int srcreg, int sizereg) { - return (EC_MOP << ARM_EL_EC_SHIFT) | ARM_EL_IL | - (is_set << 24) | (is_setg << 23) | (options << 19) | - (epilogue << 18) | (wrong_option << 17) | (option_a << 16) | - (destreg << 10) | (srcreg << 5) | sizereg; + uint32_t res = syn_set_ec(0, EC_MOP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, MOP_ISS, MEMINST, is_set); + res = FIELD_DP32(res, MOP_ISS, IS_SETG, is_setg); + res = FIELD_DP32(res, MOP_ISS, OPTIONS, options); + res = FIELD_DP32(res, MOP_ISS, EPILOGUE, epilogue); + res = FIELD_DP32(res, MOP_ISS, WRONG_OPT, wrong_option); + res = FIELD_DP32(res, MOP_ISS, OPT_A, option_a); + res = FIELD_DP32(res, MOP_ISS, DESTREG, destreg); + res = FIELD_DP32(res, MOP_ISS, SRCREG, srcreg); + res = FIELD_DP32(res, MOP_ISS, SIZEREG, sizereg); + + return res; } -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> It shares the same COPROC_ISS encoding as the other CP traps although not all the fields are used. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-16-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 16 ++++++++++++++++ target/arm/tcg/vfp_helper.c | 5 +---- 2 files changed, 17 insertions(+), 4 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ FIELD(COPROC_ISS, OP2, 17, 3) FIELD(COPROC_ISS, COND, 20, 4) FIELD(COPROC_ISS, CV, 24, 1) +static inline uint32_t syn_cp10_rt_trap(int cv, int cond, int opc1, + int crn, int rt, int isread) +{ + uint32_t res = syn_set_ec(0, EC_FPIDTRAP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, COPROC_ISS, CV, cv); + res = FIELD_DP32(res, COPROC_ISS, COND, cond); + res = FIELD_DP32(res, COPROC_ISS, OP1, opc1); + res = FIELD_DP32(res, COPROC_ISS, CRN, crn); + res = FIELD_DP32(res, COPROC_ISS, RT, rt); + res = FIELD_DP32(res, COPROC_ISS, ISREAD, isread); + + return res; +} + static inline uint32_t syn_cp14_rt_trap(int cv, int cond, int opc1, int opc2, int crn, int crm, int rt, int isread, bool is_16bit) diff --git a/target/arm/tcg/vfp_helper.c b/target/arm/tcg/vfp_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/vfp_helper.c +++ b/target/arm/tcg/vfp_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(check_hcr_el2_trap)(CPUARMState *env, uint32_t rt, uint32_t reg) g_assert_not_reached(); } - syndrome = ((EC_FPIDTRAP << ARM_EL_EC_SHIFT) - | ARM_EL_IL - | (1 << 24) | (0xe << 20) | (7 << 14) - | (reg << 10) | (rt << 5) | 1); + syndrome = syn_cp10_rt_trap(1, 0xe, 7, reg, rt, 1); raise_exception(env, EXCP_HYP_TRAP, syndrome, 2); } -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> One more step towards dropping the old #defines. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-17-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch32_hyp(CPUState *cs) */ if (cs->exception_index == EXCP_PREFETCH_ABORT || (cs->exception_index == EXCP_DATA_ABORT && - !(env->exception.syndrome & ARM_EL_ISV)) || + !FIELD_EX32(env->exception.syndrome, SYNDROME, IL)) || syn_get_ec(env->exception.syndrome) == EC_UNCATEGORIZED) { - env->exception.syndrome &= ~ARM_EL_IL; + env->exception.syndrome = FIELD_DP32(env->exception.syndrome, SYNDROME, IL, 0); } } env->cp15.esr_el[2] = env->exception.syndrome; -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> This removes the last use of ARM_EL_EC_SHIFT. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-18-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 1 - target/arm/tcg/debug.c | 2 +- 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ typedef enum { } GCSInstructionType; #define ARM_EL_EC_LENGTH 6 -#define ARM_EL_EC_SHIFT 26 #define ARM_EL_IL_SHIFT 25 #define ARM_EL_ISV_SHIFT 24 #define ARM_EL_IL (1 << ARM_EL_IL_SHIFT) diff --git a/target/arm/tcg/debug.c b/target/arm/tcg/debug.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/debug.c +++ b/target/arm/tcg/debug.c @@ -XXX,XX +XXX,XX @@ raise_exception_debug(CPUARMState *env, uint32_t excp, uint32_t syndrome) * Similarly for watchpoint and breakpoint matches. */ assert(debug_el >= cur_el); - syndrome |= (debug_el == cur_el) << ARM_EL_EC_SHIFT; + syndrome |= (debug_el == cur_el) << R_SYNDROME_EC_SHIFT; raise_exception(env, excp, syndrome, debug_el); } -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Rather than open coding a bunch of shifts and masks we can use the syndrome definitions. While we are at it assert it really is a EC_DATAABORT. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-19-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/whpx/whpx-all.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/target/arm/whpx/whpx-all.c b/target/arm/whpx/whpx-all.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/whpx/whpx-all.c +++ b/target/arm/whpx/whpx-all.c @@ -XXX,XX +XXX,XX @@ static int whpx_handle_mmio(CPUState *cpu, WHV_MEMORY_ACCESS_CONTEXT *ctx) { uint64_t syndrome = ctx->Syndrome; - bool isv = syndrome & ARM_EL_ISV; - bool iswrite = (syndrome >> 6) & 1; - bool sse = (syndrome >> 21) & 1; - uint32_t sas = (syndrome >> 22) & 3; + bool isv = FIELD_EX32(syndrome, DABORT_ISS, ISV); + bool iswrite = FIELD_EX32(syndrome, DABORT_ISS, WNR); + bool sse = FIELD_EX32(syndrome, DABORT_ISS, SSE); + uint32_t sas = FIELD_EX32(syndrome, DABORT_ISS, SAS); uint32_t len = 1 << sas; - uint32_t srt = (syndrome >> 16) & 0x1f; - uint32_t cm = (syndrome >> 8) & 0x1; + uint32_t srt = FIELD_EX32(syndrome, DABORT_ISS, SRT); + uint32_t cm = FIELD_EX32(syndrome, DABORT_ISS, CM); uint64_t val = 0; + assert(syn_get_ec(syndrome) == EC_DATAABORT); assert(!cm); assert(isv); -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Rather than open coding a bunch of shifts and masks we can use the syndrome definitions. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20260422125250.1303100-20-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/hvf/hvf.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/target/arm/hvf/hvf.c b/target/arm/hvf/hvf.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/hvf/hvf.c +++ b/target/arm/hvf/hvf.c @@ -XXX,XX +XXX,XX @@ static int hvf_handle_exception(CPUState *cpu, hv_vcpu_exit_exception_t *excp) break; } case EC_DATAABORT: { - bool isv = syndrome & ARM_EL_ISV; - bool iswrite = (syndrome >> 6) & 1; - bool s1ptw = (syndrome >> 7) & 1; - bool sse = (syndrome >> 21) & 1; - uint32_t sas = (syndrome >> 22) & 3; + bool isv = FIELD_EX32(syndrome, DABORT_ISS, ISV); + bool iswrite = FIELD_EX32(syndrome, DABORT_ISS, WNR); + bool s1ptw = FIELD_EX32(syndrome, DABORT_ISS, S1PTW); + bool sse = FIELD_EX32(syndrome, DABORT_ISS, SSE); + uint32_t sas = FIELD_EX32(syndrome, DABORT_ISS, SAS); uint32_t len = 1 << sas; - uint32_t srt = (syndrome >> 16) & 0x1f; - uint32_t cm = (syndrome >> 8) & 0x1; + uint32_t srt = FIELD_EX32(syndrome, DABORT_ISS, SRT); + uint32_t cm = FIELD_EX32(syndrome, DABORT_ISS, CM); uint64_t val = 0; uint64_t ipa = excp->physical_address; AddressSpace *as = cpu_get_address_space(cpu, ARMASIdx_NS); -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> One more step to removing the old defines. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-21-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/tlb_helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/tcg/tlb_helper.c b/target/arm/tcg/tlb_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/tlb_helper.c +++ b/target/arm/tcg/tlb_helper.c @@ -XXX,XX +XXX,XX @@ static inline uint64_t merge_syn_data_abort(uint32_t template_syn, */ assert(!fi->stage2); syn = syn_data_abort_vncr(fi->ea, is_write, fsc); - } else if (!(template_syn & ARM_EL_ISV) || target_el != 2 + } else if (!FIELD_EX32(template_syn, DABORT_ISS, ISV) || target_el != 2 || fi->s1ptw || !fi->stage2) { syn = syn_data_abort_no_iss(same_el, 0, fi->ea, 0, fi->s1ptw, is_write, fsc); -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> These are only valid for data abort syndromes. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-22-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/tlb_helper.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/tcg/tlb_helper.c b/target/arm/tcg/tlb_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/tlb_helper.c +++ b/target/arm/tcg/tlb_helper.c @@ -XXX,XX +XXX,XX @@ static inline uint64_t merge_syn_data_abort(uint32_t template_syn, * ST64BV, or ST64BV0 insns report syndrome info even for stage-1 * faults and regardless of the target EL. */ - if (template_syn & ARM_EL_VNCR) { + if (FIELD_EX32(template_syn, DABORT_ISS, VNCR)) { /* * FEAT_NV2 faults on accesses via VNCR_EL2 are a special case: * they are always reported as "same EL", even though we are going @@ -XXX,XX +XXX,XX @@ void arm_deliver_fault(ARMCPU *cpu, vaddr addr, * because we masked that out in disas_set_insn_syndrome()) */ bool is_vncr = (access_type != MMU_INST_FETCH) && - (env->exception.syndrome & ARM_EL_VNCR); + FIELD_EX32(env->exception.syndrome, DABORT_ISS, VNCR); if (is_vncr) { /* FEAT_NV2 faults on accesses via VNCR_EL2 go to EL2 */ -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Now everything is defined with registerfields we can drop the old defines. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-23-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 9 --------- 1 file changed, 9 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ typedef enum { GCS_IT_GCSPOPX = 9, } GCSInstructionType; -#define ARM_EL_EC_LENGTH 6 -#define ARM_EL_IL_SHIFT 25 -#define ARM_EL_ISV_SHIFT 24 -#define ARM_EL_IL (1 << ARM_EL_IL_SHIFT) -#define ARM_EL_ISV (1 << ARM_EL_ISV_SHIFT) - -/* In the Data Abort syndrome */ -#define ARM_EL_VNCR (1 << 13) - static inline uint32_t syn_get_ec(uint32_t syn) { return FIELD_EX32(syn, SYNDROME, EC); -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Pass the register number (rd) to the wfit helper and report it in the syndrome ISS. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-24-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 11 ++++++++++- target/arm/tcg/helper-defs.h | 2 +- target/arm/tcg/op_helper.c | 7 ++++--- target/arm/tcg/translate-a64.c | 2 +- 4 files changed, 16 insertions(+), 6 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ FIELD(WFX_ISS, RN, 5, 5) FIELD(WFX_ISS, COND, 20, 4) FIELD(WFX_ISS, CV, 24, 1) -static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit) +typedef enum { + WFI = 0b00, + WFE = 0b01, + WFIT = 0b10, + WFET = 0xb11 +} wfx_ti; + +static inline uint32_t syn_wfx(int cv, int cond, int rn, bool rv, wfx_ti ti, bool is_16bit) { uint32_t res = syn_set_ec(0, EC_WFX_TRAP); res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit) res = FIELD_DP32(res, WFX_ISS, CV, cv); res = FIELD_DP32(res, WFX_ISS, COND, cond); res = FIELD_DP32(res, WFX_ISS, TI, ti); + res = FIELD_DP32(res, WFX_ISS, RN, rn); + res = FIELD_DP32(res, WFX_ISS, RV, rv); return res; } diff --git a/target/arm/tcg/helper-defs.h b/target/arm/tcg/helper-defs.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/helper-defs.h +++ b/target/arm/tcg/helper-defs.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_2(exception_pc_alignment, noreturn, env, vaddr) DEF_HELPER_1(setend, void, env) DEF_HELPER_2(wfi, void, env, i32) DEF_HELPER_1(wfe, void, env) -DEF_HELPER_2(wfit, void, env, i64) +DEF_HELPER_2(wfit, void, env, i32) DEF_HELPER_1(yield, void, env) DEF_HELPER_1(pre_hvc, void, env) DEF_HELPER_2(pre_smc, void, env, i32) diff --git a/target/arm/tcg/op_helper.c b/target/arm/tcg/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/op_helper.c +++ b/target/arm/tcg/op_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(wfi)(CPUARMState *env, uint32_t insn_len) env->regs[15] -= insn_len; } - raise_exception(env, excp, syn_wfx(1, 0xe, 0, insn_len == 2), + raise_exception(env, excp, syn_wfx(1, 0xe, 0, false, WFI, insn_len == 2), target_el); } @@ -XXX,XX +XXX,XX @@ void HELPER(wfi)(CPUARMState *env, uint32_t insn_len) #endif } -void HELPER(wfit)(CPUARMState *env, uint64_t timeout) +void HELPER(wfit)(CPUARMState *env, uint32_t rd) { #ifdef CONFIG_USER_ONLY /* @@ -XXX,XX +XXX,XX @@ void HELPER(wfit)(CPUARMState *env, uint64_t timeout) int target_el = check_wfx_trap(env, false, &excp); /* The WFIT should time out when CNTVCT_EL0 >= the specified value. */ uint64_t cntval = gt_get_countervalue(env); + uint64_t timeout = env->xregs[rd]; /* * We want the value that we would get if we read CNTVCT_EL0 from * the current exception level, so the direct_access offset, not @@ -XXX,XX +XXX,XX @@ void HELPER(wfit)(CPUARMState *env, uint64_t timeout) if (target_el) { env->pc -= 4; - raise_exception(env, excp, syn_wfx(1, 0xe, 2, false), target_el); + raise_exception(env, excp, syn_wfx(1, 0xe, rd, true, WFIT, false), target_el); } if (uadd64_overflow(timeout, offset, &nexttick)) { diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool trans_WFIT(DisasContext *s, arg_WFIT *a) } gen_a64_update_pc(s, 4); - gen_helper_wfit(tcg_env, cpu_reg(s, a->rd)); + gen_helper_wfit(tcg_env, tcg_constant_i32(a->rd)); /* Go back to the main loop to check for interrupts */ s->base.is_jmp = DISAS_EXIT; return true; -- 2.43.0