From nobody Tue Nov 26 22:17:35 2024 Delivered-To: importer@patchew.org Authentication-Results: mx.zohomail.com; dkim=pass; spf=pass (zohomail.com: domain of gnu.org designates 209.51.188.17 as permitted sender) smtp.mailfrom=qemu-devel-bounces+importer=patchew.org@nongnu.org; dmarc=pass(p=none dis=none) header.from=telecom-paris.fr ARC-Seal: i=1; a=rsa-sha256; t=1703779668; cv=none; d=zohomail.com; s=zohoarc; b=K020jEg7mJGO2KSohqeauH/P7J4GwzZVDPDjZ60Z7ekaJbHAQRQBq3q1mXXZWokZXmcdqQgCzVLOeBQ4yEiu5FSavyZN3v0R/cFmyL3xtrwMK2hClIAvUiXc4bYIUoenK4cuYPJa/texypkXVs/ukFqw1C0QorGCJFypb2SFXMM= ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=zohomail.com; s=zohoarc; t=1703779668; h=Content-Type:Content-Transfer-Encoding:Cc:Cc:Date:Date:From:From:In-Reply-To:List-Subscribe:List-Post:List-Id:List-Archive:List-Help:List-Unsubscribe:MIME-Version:Message-ID:References:Sender:Subject:Subject:To:To:Message-Id:Reply-To; bh=5uCEBuMSY7M2Hzs+ZOpr5gghsD/0jNMVCCBmM93r0u8=; b=mkr+cnpg/JfNemZdX/02kMNCPt2aAQ22RCkqXzmqQykcNZyQFEMqMRfGZrUQkhiFAZSi7/YYWRcb8VFTiSxJRt3AYDNBpkgQVpDuoL6CqOB6FfUCMzR0T4CKk9ayLXxBOlDY7ulOY6hOnJ1IA8u4H47vu0WubHVTu91OFgITVBk= ARC-Authentication-Results: i=1; mx.zohomail.com; dkim=pass; spf=pass (zohomail.com: domain of gnu.org designates 209.51.188.17 as permitted sender) smtp.mailfrom=qemu-devel-bounces+importer=patchew.org@nongnu.org; dmarc=pass header.from= (p=none dis=none) Return-Path: Received: from lists.gnu.org (lists.gnu.org [209.51.188.17]) by mx.zohomail.com with SMTPS id 1703779668428817.6906154379336; Thu, 28 Dec 2023 08:07:48 -0800 (PST) Received: from localhost ([::1] helo=lists1p.gnu.org) by lists.gnu.org with esmtp (Exim 4.90_1) (envelope-from ) id 1rIsuY-00024h-9C; Thu, 28 Dec 2023 11:07:06 -0500 Received: from eggs.gnu.org ([2001:470:142:3::10]) by lists.gnu.org with esmtps (TLS1.2:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.90_1) (envelope-from ) id 1rIsuX-00023m-9d; Thu, 28 Dec 2023 11:07:05 -0500 Received: from zproxy3.enst.fr ([137.194.2.222]) by eggs.gnu.org with esmtps (TLS1.2:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.90_1) (envelope-from ) id 1rIsuS-0007D5-Pi; Thu, 28 Dec 2023 11:07:05 -0500 Received: from localhost (localhost [IPv6:::1]) by zproxy3.enst.fr (Postfix) with ESMTP id 7B112A051C; Thu, 28 Dec 2023 17:06:56 +0100 (CET) Received: from zproxy3.enst.fr ([IPv6:::1]) by localhost (zproxy3.enst.fr [IPv6:::1]) (amavis, port 10032) with ESMTP id lTTOrweQ8QvG; Thu, 28 Dec 2023 17:06:55 +0100 (CET) Received: from localhost (localhost [IPv6:::1]) by zproxy3.enst.fr (Postfix) with ESMTP id 969EBA061C; Thu, 28 Dec 2023 17:06:55 +0100 (CET) Received: from zproxy3.enst.fr ([IPv6:::1]) by localhost (zproxy3.enst.fr [IPv6:::1]) (amavis, port 10026) with ESMTP id x3q-iCl8Mg54; Thu, 28 Dec 2023 17:06:55 +0100 (CET) Received: from inesv-Inspiron-3501.lan (unknown [IPv6:2001:861:4680:b1b0:3937:c54c:5417:70d4]) by zproxy3.enst.fr (Postfix) with ESMTPSA id 4AE51A0584; Thu, 28 Dec 2023 17:06:55 +0100 (CET) DKIM-Filter: OpenDKIM Filter v2.10.3 zproxy3.enst.fr 969EBA061C DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=telecom-paris.fr; s=A35C7578-1106-11E5-A17F-C303FDDA8F2E; t=1703779615; bh=5uCEBuMSY7M2Hzs+ZOpr5gghsD/0jNMVCCBmM93r0u8=; h=From:To:Date:Message-ID:MIME-Version; b=M6wvdE7mPAoGhRXZup2exfTkedg/qDWznyGF9gzujTUVf8CGqsKf58zx2JirerbDs i+w7VKWF8ECymPZrNyhH/fXwd/R2vk/yCvh1WO79Hct2vG3CFpXc/WhMhRGvE496Hd OAZ28EEQeCz+EMHgeVPhdcKKpqT5dHVd7VNK2GR0= X-Virus-Scanned: amavis at enst.fr From: =?UTF-8?q?In=C3=A8s=20Varhol?= To: qemu-devel@nongnu.org Cc: Alistair Francis , Thomas Huth , =?UTF-8?q?In=C3=A8s=20Varhol?= , Peter Maydell , Paolo Bonzini , Laurent Vivier , qemu-arm@nongnu.org, =?UTF-8?q?Philippe=20Mathieu-Daud=C3=A9?= , Arnaud Minier Subject: [PATCH v4 1/3] hw/misc: Implement STM32L4x5 EXTI Date: Thu, 28 Dec 2023 17:06:30 +0100 Message-ID: <20231228160649.299058-2-ines.varhol@telecom-paris.fr> X-Mailer: git-send-email 2.43.0 In-Reply-To: <20231228160649.299058-1-ines.varhol@telecom-paris.fr> References: <20231228160649.299058-1-ines.varhol@telecom-paris.fr> MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable Received-SPF: pass (zohomail.com: domain of gnu.org designates 209.51.188.17 as permitted sender) client-ip=209.51.188.17; envelope-from=qemu-devel-bounces+importer=patchew.org@nongnu.org; helo=lists.gnu.org; Received-SPF: pass client-ip=137.194.2.222; envelope-from=ines.varhol@telecom-paris.fr; helo=zproxy3.enst.fr X-Spam_score_int: -20 X-Spam_score: -2.1 X-Spam_bar: -- X-Spam_report: (-2.1 / 5.0 requ) BAYES_00=-1.9, DKIM_SIGNED=0.1, DKIM_VALID=-0.1, DKIM_VALID_AU=-0.1, DKIM_VALID_EF=-0.1, SPF_HELO_NONE=0.001, SPF_PASS=-0.001, T_SCC_BODY_TEXT_LINE=-0.01 autolearn=ham autolearn_force=no X-Spam_action: no action X-BeenThere: qemu-devel@nongnu.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: qemu-devel-bounces+importer=patchew.org@nongnu.org Sender: qemu-devel-bounces+importer=patchew.org@nongnu.org X-ZohoMail-DKIM: pass (identity @telecom-paris.fr) X-ZM-MESSAGEID: 1703779671093100004 Content-Type: text/plain; charset="utf-8" Although very similar to the STM32F4xx EXTI, STM32L4x5 EXTI generates more than 32 event/interrupt requests and thus uses more registers than STM32F4xx EXTI which generates 23 event/interrupt requests. Signed-off-by: Arnaud Minier Signed-off-by: In=C3=A8s Varhol Acked-by: Alistair Francis --- hw/misc/Kconfig | 3 + hw/misc/meson.build | 1 + hw/misc/stm32l4x5_exti.c | 288 +++++++++++++++++++++++++++++++ hw/misc/trace-events | 5 + include/hw/misc/stm32l4x5_exti.h | 51 ++++++ 5 files changed, 348 insertions(+) create mode 100644 hw/misc/stm32l4x5_exti.c create mode 100644 include/hw/misc/stm32l4x5_exti.h diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index cc8a8c1418..3efe3dc2cc 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -87,6 +87,9 @@ config STM32F4XX_SYSCFG config STM32F4XX_EXTI bool =20 +config STM32L4X5_EXTI + bool + config MIPS_ITU bool =20 diff --git a/hw/misc/meson.build b/hw/misc/meson.build index 36c20d5637..16db6e228d 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -110,6 +110,7 @@ system_ss.add(when: 'CONFIG_XLNX_VERSAL_TRNG', if_true:= files( system_ss.add(when: 'CONFIG_STM32F2XX_SYSCFG', if_true: files('stm32f2xx_s= yscfg.c')) system_ss.add(when: 'CONFIG_STM32F4XX_SYSCFG', if_true: files('stm32f4xx_s= yscfg.c')) system_ss.add(when: 'CONFIG_STM32F4XX_EXTI', if_true: files('stm32f4xx_ext= i.c')) +system_ss.add(when: 'CONFIG_STM32L4X5_EXTI', if_true: files('stm32l4x5_ext= i.c')) system_ss.add(when: 'CONFIG_MPS2_FPGAIO', if_true: files('mps2-fpgaio.c')) system_ss.add(when: 'CONFIG_MPS2_SCC', if_true: files('mps2-scc.c')) =20 diff --git a/hw/misc/stm32l4x5_exti.c b/hw/misc/stm32l4x5_exti.c new file mode 100644 index 0000000000..81c901d3e5 --- /dev/null +++ b/hw/misc/stm32l4x5_exti.c @@ -0,0 +1,288 @@ +/* + * STM32L4x5 EXTI (Extended interrupts and events controller) + * + * Copyright (c) 2023 Arnaud Minier + * Copyright (c) 2023 Samuel Tardieu + * Copyright (c) 2023 In=C3=A8s Varhol + * + * SPDX-License-Identifier: GPL-2.0-or-later + * + * This work is licensed under the terms of the GNU GPL, version 2 or late= r. + * See the COPYING file in the top-level directory. + * + * This work is based on the stm32f4xx_exti by Alistair Francis. + * Original code is licensed under the MIT License: + * + * Copyright (c) 2014 Alistair Francis + */ + +/* + * The reference used is the STMicroElectronics RM0351 Reference manual + * for STM32L4x5 and STM32L4x6 advanced Arm =C2=AE -based 32-bit MCUs. + * https://www.st.com/en/microcontrollers-microprocessors/stm32l4x5/docume= ntation.html + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "trace.h" +#include "hw/irq.h" +#include "migration/vmstate.h" +#include "hw/misc/stm32l4x5_exti.h" + +#define EXTI_IMR1 0x00 +#define EXTI_EMR1 0x04 +#define EXTI_RTSR1 0x08 +#define EXTI_FTSR1 0x0C +#define EXTI_SWIER1 0x10 +#define EXTI_PR1 0x14 +#define EXTI_IMR2 0x20 +#define EXTI_EMR2 0x24 +#define EXTI_RTSR2 0x28 +#define EXTI_FTSR2 0x2C +#define EXTI_SWIER2 0x30 +#define EXTI_PR2 0x34 + +#define EXTI_NUM_GPIO_EVENT_IN_LINES 16 + +/* 0b11111111_10000010_00000000_00000000 */ +#define DIRECT_LINE_MASK1 0xFF820000 +/* 0b00000000_00000000_00000000_10000111 */ +#define DIRECT_LINE_MASK2 0x00000087 +/* 0b11111111_11111111_11111111_00000000 */ +#define RESERVED_BITS_MASK2 0xFFFFFF00 + +/* 0b00000000_00000000_00000000_01111000 */ +#define ACTIVABLE_MASK2 (~DIRECT_LINE_MASK2 & ~RESERVED_BITS_MASK2) + +static void stm32l4x5_exti_reset_hold(Object *obj) +{ + Stm32l4x5ExtiState *s =3D STM32L4X5_EXTI(obj); + + s->imr[0] =3D DIRECT_LINE_MASK1; + s->emr[0] =3D 0x00000000; + s->rtsr[0] =3D 0x00000000; + s->ftsr[0] =3D 0x00000000; + s->swier[0] =3D 0x00000000; + s->pr[0] =3D 0x00000000; + + s->imr[1] =3D DIRECT_LINE_MASK2; + s->emr[1] =3D 0x00000000; + s->rtsr[1] =3D 0x00000000; + s->ftsr[1] =3D 0x00000000; + s->swier[1] =3D 0x00000000; + s->pr[1] =3D 0x00000000; +} + +static void stm32l4x5_exti_set_irq(void *opaque, int irq, int level) +{ + Stm32l4x5ExtiState *s =3D opaque; + const unsigned n =3D irq >=3D 32; + const int oirq =3D irq; + + trace_stm32l4x5_exti_set_irq(irq, level); + + if (irq >=3D 32) { + /* Shift the value to enable access in x2 registers. */ + irq -=3D 32; + } + + /* If the interrupt is masked, pr won't be raised */ + if (!((1 << irq) & s->imr[n])) { + return; + } + + if (((1 << irq) & s->rtsr[n]) && level) { + /* Rising Edge */ + s->pr[n] |=3D 1 << irq; + qemu_irq_pulse(s->irq[oirq]); + } else if (((1 << irq) & s->ftsr[n]) && !level) { + /* Falling Edge */ + s->pr[n] |=3D 1 << irq; + qemu_irq_pulse(s->irq[oirq]); + } + +} + +static uint64_t stm32l4x5_exti_read(void *opaque, hwaddr addr, + unsigned int size) +{ + Stm32l4x5ExtiState *s =3D opaque; + uint32_t r =3D 0; + const unsigned n =3D addr >=3D EXTI_IMR2; + + switch (addr) { + case EXTI_IMR1: + case EXTI_IMR2: + r =3D s->imr[n]; + break; + case EXTI_EMR1: + case EXTI_EMR2: + r =3D s->emr[n]; + break; + case EXTI_RTSR1: + case EXTI_RTSR2: + r =3D s->rtsr[n]; + break; + case EXTI_FTSR1: + case EXTI_FTSR2: + r =3D s->ftsr[n]; + break; + case EXTI_SWIER1: + case EXTI_SWIER2: + r =3D s->swier[n]; + break; + case EXTI_PR1: + case EXTI_PR2: + r =3D s->pr[n]; + break; + + default: + qemu_log_mask(LOG_GUEST_ERROR, + "STM32L4X5_exti_read: Bad offset 0x%x\n", (int)addr); + break; + } + + trace_stm32l4x5_exti_read(addr, r); + + return r; +} + +static void stm32l4x5_exti_write(void *opaque, hwaddr addr, + uint64_t val64, unsigned int size) +{ + Stm32l4x5ExtiState *s =3D opaque; + const uint32_t value =3D (uint32_t)val64; + + trace_stm32l4x5_exti_write(addr, value); + + switch (addr) { + case EXTI_IMR1: + s->imr[0] =3D value; + return; + case EXTI_EMR1: + s->emr[0] =3D value; + return; + case EXTI_RTSR1: + s->rtsr[0] =3D value & ~DIRECT_LINE_MASK1; + return; + case EXTI_FTSR1: + s->ftsr[0] =3D value & ~DIRECT_LINE_MASK1; + return; + case EXTI_SWIER1: + const uint32_t set1 =3D value & ~DIRECT_LINE_MASK1; + const uint32_t pend1 =3D set1 & ~s->swier[0] & s->imr[0] & ~s->pr[= 0]; + s->swier[0] =3D set1; + s->pr[0] |=3D pend1; + for (int i =3D 0; i < 32; i++) { + if (pend1 & (1 << i)) { + qemu_irq_pulse(s->irq[i]); + } + } + return; + case EXTI_PR1: + const uint32_t cleared1 =3D s->pr[0] & value & ~DIRECT_LINE_MASK1; + /* This bit is cleared by writing a 1 to it */ + s->pr[0] &=3D ~cleared1; + /* Software triggered interrupts are cleared as well */ + s->swier[0] &=3D ~cleared1; + return; + case EXTI_IMR2: + s->imr[1] =3D value & ~RESERVED_BITS_MASK2; + return; + case EXTI_EMR2: + s->emr[1] =3D value & ~RESERVED_BITS_MASK2; + return; + case EXTI_RTSR2: + s->rtsr[1] =3D value & ACTIVABLE_MASK2; + return; + case EXTI_FTSR2: + s->ftsr[1] =3D value & ACTIVABLE_MASK2; + return; + case EXTI_SWIER2: + const uint32_t set2 =3D value & ACTIVABLE_MASK2; + const uint32_t pend2 =3D set2 & ~s->swier[1] & s->imr[1] & ~s->pr[= 1]; + s->swier[1] =3D set2; + s->pr[1] |=3D pend2; + for (int i =3D 0; i < 8; i++) { + if (pend2 & (1 << i)) { + qemu_irq_pulse(s->irq[32 + i]); + } + } + return; + case EXTI_PR2: + const uint32_t cleared =3D s->pr[1] & value & ACTIVABLE_MASK2; + /* This bit is cleared by writing a 1 to it */ + s->pr[1] &=3D ~cleared; + /* Software triggered interrupts are cleared as well */ + s->swier[1] &=3D ~cleared; + return; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "STM32L4X5_exti_write: Bad offset 0x%x\n", (int)addr= ); + } +} + +static const MemoryRegionOps stm32l4x5_exti_ops =3D { + .read =3D stm32l4x5_exti_read, + .write =3D stm32l4x5_exti_write, + .endianness =3D DEVICE_NATIVE_ENDIAN, + .impl.min_access_size =3D 4, + .impl.max_access_size =3D 4, + .impl.unaligned =3D false, + .valid.min_access_size =3D 4, + .valid.max_access_size =3D 4, + .valid.unaligned =3D false, +}; + +static void stm32l4x5_exti_init(Object *obj) +{ + Stm32l4x5ExtiState *s =3D STM32L4X5_EXTI(obj); + int i; + + for (i =3D 0; i < EXTI_NUM_INTERRUPT_OUT_LINES; i++) { + sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->irq[i]); + } + + memory_region_init_io(&s->mmio, obj, &stm32l4x5_exti_ops, s, + TYPE_STM32L4X5_EXTI, 0x400); + sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio); + + qdev_init_gpio_in(DEVICE(obj), stm32l4x5_exti_set_irq, + EXTI_NUM_GPIO_EVENT_IN_LINES); +} + +static const VMStateDescription vmstate_stm32l4x5_exti =3D { + .name =3D TYPE_STM32L4X5_EXTI, + .version_id =3D 1, + .minimum_version_id =3D 1, + .fields =3D (VMStateField[]) { + VMSTATE_UINT32_ARRAY(imr, Stm32l4x5ExtiState, EXTI_NUM_REGISTER), + VMSTATE_UINT32_ARRAY(emr, Stm32l4x5ExtiState, EXTI_NUM_REGISTER), + VMSTATE_UINT32_ARRAY(rtsr, Stm32l4x5ExtiState, EXTI_NUM_REGISTER), + VMSTATE_UINT32_ARRAY(ftsr, Stm32l4x5ExtiState, EXTI_NUM_REGISTER), + VMSTATE_UINT32_ARRAY(swier, Stm32l4x5ExtiState, EXTI_NUM_REGISTER), + VMSTATE_UINT32_ARRAY(pr, Stm32l4x5ExtiState, EXTI_NUM_REGISTER), + VMSTATE_END_OF_LIST() + } +}; + +static void stm32l4x5_exti_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc =3D DEVICE_CLASS(klass); + ResettableClass *rc =3D RESETTABLE_CLASS(klass); + + dc->vmsd =3D &vmstate_stm32l4x5_exti; + rc->phases.hold =3D stm32l4x5_exti_reset_hold; +} + +static const TypeInfo stm32l4x5_exti_types[] =3D { + { + .name =3D TYPE_STM32L4X5_EXTI, + .parent =3D TYPE_SYS_BUS_DEVICE, + .instance_size =3D sizeof(Stm32l4x5ExtiState), + .instance_init =3D stm32l4x5_exti_init, + .class_init =3D stm32l4x5_exti_class_init, + } +}; + +DEFINE_TYPES(stm32l4x5_exti_types) diff --git a/hw/misc/trace-events b/hw/misc/trace-events index 05ff692441..2f01c62c0e 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -163,6 +163,11 @@ stm32f4xx_exti_set_irq(int irq, int level) "Set EXTI: = %d to %d" stm32f4xx_exti_read(uint64_t addr) "reg read: addr: 0x%" PRIx64 " " stm32f4xx_exti_write(uint64_t addr, uint64_t data) "reg write: addr: 0x%" = PRIx64 " val: 0x%" PRIx64 "" =20 +# stm32l4x5_exti.c +stm32l4x5_exti_set_irq(int irq, int level) "Set EXTI: %d to %d" +stm32l4x5_exti_read(uint64_t addr, uint64_t data) "reg read: addr: 0x%" PR= Ix64 " val: 0x%" PRIx64 "" +stm32l4x5_exti_write(uint64_t addr, uint64_t data) "reg write: addr: 0x%" = PRIx64 " val: 0x%" PRIx64 "" + # tz-mpc.c tz_mpc_reg_read(uint32_t offset, uint64_t data, unsigned size) "TZ MPC reg= s read: offset 0x%x data 0x%" PRIx64 " size %u" tz_mpc_reg_write(uint32_t offset, uint64_t data, unsigned size) "TZ MPC re= gs write: offset 0x%x data 0x%" PRIx64 " size %u" diff --git a/include/hw/misc/stm32l4x5_exti.h b/include/hw/misc/stm32l4x5_e= xti.h new file mode 100644 index 0000000000..be961d2f01 --- /dev/null +++ b/include/hw/misc/stm32l4x5_exti.h @@ -0,0 +1,51 @@ +/* + * STM32L4x5 EXTI (Extended interrupts and events controller) + * + * Copyright (c) 2023 Arnaud Minier + * Copyright (c) 2023 In=C3=A8s Varhol + * + * SPDX-License-Identifier: GPL-2.0-or-later + * + * This work is licensed under the terms of the GNU GPL, version 2 or late= r. + * See the COPYING file in the top-level directory. + * + * This work is based on the stm32f4xx_exti by Alistair Francis. + * Original code is licensed under the MIT License: + * + * Copyright (c) 2014 Alistair Francis + */ + +/* + * The reference used is the STMicroElectronics RM0351 Reference manual + * for STM32L4x5 and STM32L4x6 advanced Arm =C2=AE -based 32-bit MCUs. + * https://www.st.com/en/microcontrollers-microprocessors/stm32l4x5/docume= ntation.html + */ + +#ifndef HW_STM32L4X5_EXTI_H +#define HW_STM32L4X5_EXTI_H + +#include "hw/sysbus.h" +#include "qom/object.h" + +#define TYPE_STM32L4X5_EXTI "stm32l4x5-exti" +OBJECT_DECLARE_SIMPLE_TYPE(Stm32l4x5ExtiState, STM32L4X5_EXTI) + +#define EXTI_NUM_INTERRUPT_OUT_LINES 40 +#define EXTI_NUM_REGISTER 2 + +struct Stm32l4x5ExtiState { + SysBusDevice parent_obj; + + MemoryRegion mmio; + + uint32_t imr[EXTI_NUM_REGISTER]; + uint32_t emr[EXTI_NUM_REGISTER]; + uint32_t rtsr[EXTI_NUM_REGISTER]; + uint32_t ftsr[EXTI_NUM_REGISTER]; + uint32_t swier[EXTI_NUM_REGISTER]; + uint32_t pr[EXTI_NUM_REGISTER]; + + qemu_irq irq[EXTI_NUM_INTERRUPT_OUT_LINES]; +}; + +#endif --=20 2.43.0 From nobody Tue Nov 26 22:17:35 2024 Delivered-To: importer@patchew.org Authentication-Results: mx.zohomail.com; dkim=pass; spf=pass (zohomail.com: domain of gnu.org designates 209.51.188.17 as permitted sender) smtp.mailfrom=qemu-devel-bounces+importer=patchew.org@nongnu.org; dmarc=pass(p=none dis=none) header.from=telecom-paris.fr ARC-Seal: i=1; a=rsa-sha256; t=1703779696; cv=none; d=zohomail.com; s=zohoarc; b=CUz+35uGJzMrFKRAEIZk7WcXCn9Imp3xM13XZaaG8P03SSL5OFWOM1CQyq8cs0nU7XygD6CpymM+Om8oTe+gJM6O5zCrWO29DniXLOPtTJ0xjUysvl7OJM3l0WvwmSnfPTF0Bua1+9avtl3m/RQers1lFDoC34URE4lTOG7lQzo= ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=zohomail.com; s=zohoarc; t=1703779696; h=Content-Type:Content-Transfer-Encoding:Cc:Cc:Date:Date:From:From:In-Reply-To:List-Subscribe:List-Post:List-Id:List-Archive:List-Help:List-Unsubscribe:MIME-Version:Message-ID:References:Sender:Subject:Subject:To:To:Message-Id:Reply-To; bh=NpgDzx6XcKTUcdRN85AGRZogSGXxcYnCSQznsmJIG7s=; b=Ioy7WK5zDtNkf4X1sqUPo9kn4sFy2FGzpXegDU+B29cEszBkqIrW61ECgcXxtomlnkqUC/4cUvSAvPQeQxVs354j//jgNsXqypfsR+e3xhgBMAGs/1kgZQ1aIR/wWkS24PgN3KLrNVhiNNijR3PWuxCDjcVdQ8UJqAadW4D91l4= ARC-Authentication-Results: i=1; mx.zohomail.com; dkim=pass; spf=pass (zohomail.com: domain of gnu.org designates 209.51.188.17 as permitted sender) smtp.mailfrom=qemu-devel-bounces+importer=patchew.org@nongnu.org; dmarc=pass header.from= (p=none dis=none) Return-Path: Received: from lists.gnu.org (lists.gnu.org [209.51.188.17]) by mx.zohomail.com with SMTPS id 170377969631351.346736585065855; Thu, 28 Dec 2023 08:08:16 -0800 (PST) Received: from localhost ([::1] helo=lists1p.gnu.org) by lists.gnu.org with esmtp (Exim 4.90_1) (envelope-from ) id 1rIsuZ-00025E-AY; Thu, 28 Dec 2023 11:07:07 -0500 Received: from eggs.gnu.org ([2001:470:142:3::10]) by lists.gnu.org with esmtps (TLS1.2:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.90_1) (envelope-from ) id 1rIsuX-000242-EZ; Thu, 28 Dec 2023 11:07:05 -0500 Received: from zproxy3.enst.fr ([137.194.2.222]) by eggs.gnu.org with esmtps (TLS1.2:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.90_1) (envelope-from ) id 1rIsuS-0007D6-SC; Thu, 28 Dec 2023 11:07:05 -0500 Received: from localhost (localhost [IPv6:::1]) by zproxy3.enst.fr (Postfix) with ESMTP id CA22AA0588; Thu, 28 Dec 2023 17:06:56 +0100 (CET) Received: from zproxy3.enst.fr ([IPv6:::1]) by localhost (zproxy3.enst.fr [IPv6:::1]) (amavis, port 10032) with ESMTP id hXlpzwUd1itr; Thu, 28 Dec 2023 17:06:55 +0100 (CET) Received: from localhost (localhost [IPv6:::1]) by zproxy3.enst.fr (Postfix) with ESMTP id C7869A0651; Thu, 28 Dec 2023 17:06:55 +0100 (CET) Received: from zproxy3.enst.fr ([IPv6:::1]) by localhost (zproxy3.enst.fr [IPv6:::1]) (amavis, port 10026) with ESMTP id l1k9rZQHsaDX; Thu, 28 Dec 2023 17:06:55 +0100 (CET) Received: from inesv-Inspiron-3501.lan (unknown [IPv6:2001:861:4680:b1b0:3937:c54c:5417:70d4]) by zproxy3.enst.fr (Postfix) with ESMTPSA id 7EF23A051C; Thu, 28 Dec 2023 17:06:55 +0100 (CET) DKIM-Filter: OpenDKIM Filter v2.10.3 zproxy3.enst.fr C7869A0651 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=telecom-paris.fr; s=A35C7578-1106-11E5-A17F-C303FDDA8F2E; t=1703779615; bh=NpgDzx6XcKTUcdRN85AGRZogSGXxcYnCSQznsmJIG7s=; h=From:To:Date:Message-ID:MIME-Version; b=M/Xg/BC0+CelxrwnXX7niXDKL4nNVd1C/PKJNJ3V3URyXKBmFLBp9SjGDnDO5bLSs 7D4593S5Epjnk7qjtKTnQBrxezK0gHlct5rlKSlBqqTgg3cC+/aAH77q+OA+BL8fPf Sdyezg85/B8c3pOCZlZGaj2MdagTuZjzxfPC22yI= X-Virus-Scanned: amavis at enst.fr From: =?UTF-8?q?In=C3=A8s=20Varhol?= To: qemu-devel@nongnu.org Cc: Alistair Francis , Thomas Huth , =?UTF-8?q?In=C3=A8s=20Varhol?= , Peter Maydell , Paolo Bonzini , Laurent Vivier , qemu-arm@nongnu.org, =?UTF-8?q?Philippe=20Mathieu-Daud=C3=A9?= , Arnaud Minier Subject: [PATCH v4 2/3] tests/qtest: Add STM32L4x5 EXTI QTest testcase Date: Thu, 28 Dec 2023 17:06:31 +0100 Message-ID: <20231228160649.299058-3-ines.varhol@telecom-paris.fr> X-Mailer: git-send-email 2.43.0 In-Reply-To: <20231228160649.299058-1-ines.varhol@telecom-paris.fr> References: <20231228160649.299058-1-ines.varhol@telecom-paris.fr> MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable Received-SPF: pass (zohomail.com: domain of gnu.org designates 209.51.188.17 as permitted sender) client-ip=209.51.188.17; envelope-from=qemu-devel-bounces+importer=patchew.org@nongnu.org; helo=lists.gnu.org; Received-SPF: pass client-ip=137.194.2.222; envelope-from=ines.varhol@telecom-paris.fr; helo=zproxy3.enst.fr X-Spam_score_int: -20 X-Spam_score: -2.1 X-Spam_bar: -- X-Spam_report: (-2.1 / 5.0 requ) BAYES_00=-1.9, DKIM_SIGNED=0.1, DKIM_VALID=-0.1, DKIM_VALID_AU=-0.1, DKIM_VALID_EF=-0.1, SPF_HELO_NONE=0.001, SPF_PASS=-0.001, T_SCC_BODY_TEXT_LINE=-0.01 autolearn=ham autolearn_force=no X-Spam_action: no action X-BeenThere: qemu-devel@nongnu.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: qemu-devel-bounces+importer=patchew.org@nongnu.org Sender: qemu-devel-bounces+importer=patchew.org@nongnu.org X-ZohoMail-DKIM: pass (identity @telecom-paris.fr) X-ZM-MESSAGEID: 1703779698478100003 Content-Type: text/plain; charset="utf-8" Signed-off-by: Arnaud Minier Signed-off-by: In=C3=A8s Varhol --- tests/qtest/meson.build | 5 + tests/qtest/stm32l4x5_exti-test.c | 596 ++++++++++++++++++++++++++++++ 2 files changed, 601 insertions(+) create mode 100644 tests/qtest/stm32l4x5_exti-test.c diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index 47dabf91d0..d5126f4d86 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -194,6 +194,10 @@ qtests_aspeed =3D \ ['aspeed_hace-test', 'aspeed_smc-test', 'aspeed_gpio-test'] + +qtests_stm32l4x5 =3D \ + ['stm32l4x5_exti-test'] + qtests_arm =3D \ (config_all_devices.has_key('CONFIG_MPS2') ? ['sse-timer-test'] : []) + \ (config_all_devices.has_key('CONFIG_CMSDK_APB_DUALTIMER') ? ['cmsdk-apb-= dualtimer-test'] : []) + \ @@ -207,6 +211,7 @@ qtests_arm =3D \ (config_all_devices.has_key('CONFIG_TPM_TIS_I2C') ? ['tpm-tis-i2c-test']= : []) + \ (config_all_devices.has_key('CONFIG_VEXPRESS') ? ['test-arm-mptimer'] : = []) + \ (config_all_devices.has_key('CONFIG_MICROBIT') ? ['microbit-test'] : [])= + \ + (config_all_devices.has_key('CONFIG_STM32L4X5_SOC') ? qtests_stm32l4x5 := []) + \ ['arm-cpu-features', 'boot-serial-test'] =20 diff --git a/tests/qtest/stm32l4x5_exti-test.c b/tests/qtest/stm32l4x5_exti= -test.c new file mode 100644 index 0000000000..60c8297246 --- /dev/null +++ b/tests/qtest/stm32l4x5_exti-test.c @@ -0,0 +1,596 @@ +/* + * QTest testcase for STM32L4x5_EXTI + * + * Copyright (c) 2023 Arnaud Minier + * Copyright (c) 2023 In=C3=A8s Varhol + * + * This work is licensed under the terms of the GNU GPL, version 2 or late= r. + * See the COPYING file in the top-level directory. + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +#define EXTI_BASE_ADDR 0x40010400 +#define EXTI_IMR1 0x00 +#define EXTI_EMR1 0x04 +#define EXTI_RTSR1 0x08 +#define EXTI_FTSR1 0x0C +#define EXTI_SWIER1 0x10 +#define EXTI_PR1 0x14 +#define EXTI_IMR2 0x20 +#define EXTI_EMR2 0x24 +#define EXTI_RTSR2 0x28 +#define EXTI_FTSR2 0x2C +#define EXTI_SWIER2 0x30 +#define EXTI_PR2 0x34 + +#define NVIC_ISER 0xE000E100 +#define NVIC_ISPR 0xE000E200 +#define NVIC_ICPR 0xE000E280 + +#define EXTI0_IRQ 6 +#define EXTI1_IRQ 7 +#define EXTI35_IRQ 1 + +static void enable_nvic_irq(unsigned int n) +{ + writel(NVIC_ISER, 1 << n); +} + +static void unpend_nvic_irq(unsigned int n) +{ + writel(NVIC_ICPR, 1 << n); +} + +static bool check_nvic_pending(unsigned int n) +{ + return readl(NVIC_ISPR) & (1 << n); +} + +static void exti_writel(unsigned int offset, uint32_t value) +{ + writel(EXTI_BASE_ADDR + offset, value); +} + +static uint32_t exti_readl(unsigned int offset) +{ + return readl(EXTI_BASE_ADDR + offset); +} + +static void test_reg_write_read(void) +{ + /* Test that non-reserved bits in xMR and xTSR can be set and cleared = */ + + exti_writel(EXTI_IMR1, 0xFFFFFFFF); + uint32_t imr1 =3D exti_readl(EXTI_IMR1); + g_assert_cmpuint(imr1, =3D=3D, 0xFFFFFFFF); + exti_writel(EXTI_IMR1, 0x00000000); + imr1 =3D exti_readl(EXTI_IMR1); + g_assert_cmpuint(imr1, =3D=3D, 0x00000000); + + exti_writel(EXTI_EMR1, 0xFFFFFFFF); + uint32_t emr1 =3D exti_readl(EXTI_EMR1); + g_assert_cmpuint(emr1, =3D=3D, 0xFFFFFFFF); + exti_writel(EXTI_EMR1, 0x00000000); + emr1 =3D exti_readl(EXTI_EMR1); + g_assert_cmpuint(emr1, =3D=3D, 0x00000000); + + exti_writel(EXTI_RTSR1, 0xFFFFFFFF); + uint32_t rtsr1 =3D exti_readl(EXTI_RTSR1); + g_assert_cmpuint(rtsr1, =3D=3D, 0x007DFFFF); + exti_writel(EXTI_RTSR1, 0x00000000); + rtsr1 =3D exti_readl(EXTI_RTSR1); + g_assert_cmpuint(rtsr1, =3D=3D, 0x00000000); + + exti_writel(EXTI_FTSR1, 0xFFFFFFFF); + uint32_t ftsr1 =3D exti_readl(EXTI_FTSR1); + g_assert_cmpuint(ftsr1, =3D=3D, 0x007DFFFF); + exti_writel(EXTI_FTSR1, 0x00000000); + ftsr1 =3D exti_readl(EXTI_FTSR1); + g_assert_cmpuint(ftsr1, =3D=3D, 0x00000000); + + exti_writel(EXTI_IMR2, 0xFFFFFFFF); + uint32_t imr2 =3D exti_readl(EXTI_IMR2); + g_assert_cmpuint(imr2, =3D=3D, 0x000000FF); + exti_writel(EXTI_IMR2, 0x00000000); + imr2 =3D exti_readl(EXTI_IMR2); + g_assert_cmpuint(imr2, =3D=3D, 0x00000000); + + exti_writel(EXTI_EMR2, 0xFFFFFFFF); + uint32_t emr2 =3D exti_readl(EXTI_EMR2); + g_assert_cmpuint(emr2, =3D=3D, 0x000000FF); + exti_writel(EXTI_EMR2, 0x00000000); + emr2 =3D exti_readl(EXTI_EMR2); + g_assert_cmpuint(emr2, =3D=3D, 0x00000000); + + exti_writel(EXTI_RTSR2, 0xFFFFFFFF); + uint32_t rtsr2 =3D exti_readl(EXTI_RTSR2); + g_assert_cmpuint(rtsr2, =3D=3D, 0x00000078); + exti_writel(EXTI_RTSR2, 0x00000000); + rtsr2 =3D exti_readl(EXTI_RTSR2); + g_assert_cmpuint(rtsr2, =3D=3D, 0x00000000); + + exti_writel(EXTI_FTSR2, 0xFFFFFFFF); + uint32_t ftsr2 =3D exti_readl(EXTI_FTSR2); + g_assert_cmpuint(ftsr2, =3D=3D, 0x00000078); + exti_writel(EXTI_FTSR2, 0x00000000); + ftsr2 =3D exti_readl(EXTI_FTSR2); + g_assert_cmpuint(ftsr2, =3D=3D, 0x00000000); +} + +static void test_direct_lines_write(void) +{ + /* Test that direct lines reserved bits are not written to */ + + exti_writel(EXTI_RTSR1, 0xFF820000); + uint32_t rtsr1 =3D exti_readl(EXTI_RTSR1); + g_assert_cmpuint(rtsr1, =3D=3D, 0x00000000); + + exti_writel(EXTI_FTSR1, 0xFF820000); + uint32_t ftsr1 =3D exti_readl(EXTI_FTSR1); + g_assert_cmpuint(ftsr1, =3D=3D, 0x00000000); + + exti_writel(EXTI_SWIER1, 0xFF820000); + uint32_t swier1 =3D exti_readl(EXTI_SWIER1); + g_assert_cmpuint(swier1, =3D=3D, 0x00000000); + + exti_writel(EXTI_PR1, 0xFF820000); + uint32_t pr1 =3D exti_readl(EXTI_PR1); + g_assert_cmpuint(pr1, =3D=3D, 0x00000000); + + exti_writel(EXTI_RTSR2, 0x00000087); + const uint32_t rtsr2 =3D exti_readl(EXTI_RTSR2); + g_assert_cmpuint(rtsr2, =3D=3D, 0x00000000); + + exti_writel(EXTI_FTSR2, 0x00000087); + const uint32_t ftsr2 =3D exti_readl(EXTI_FTSR2); + g_assert_cmpuint(ftsr2, =3D=3D, 0x00000000); + + exti_writel(EXTI_SWIER2, 0x00000087); + const uint32_t swier2 =3D exti_readl(EXTI_SWIER2); + g_assert_cmpuint(swier2, =3D=3D, 0x00000000); + + exti_writel(EXTI_PR2, 0x00000087); + const uint32_t pr2 =3D exti_readl(EXTI_PR2); + g_assert_cmpuint(pr2, =3D=3D, 0x00000000); +} + +static void test_reserved_bits_write(void) +{ + /* Test that reserved bits stay are not written to */ + + exti_writel(EXTI_IMR2, 0xFFFFFF00); + uint32_t imr2 =3D exti_readl(EXTI_IMR2); + g_assert_cmpuint(imr2, =3D=3D, 0x00000000); + + exti_writel(EXTI_EMR2, 0xFFFFFF00); + uint32_t emr2 =3D exti_readl(EXTI_EMR2); + g_assert_cmpuint(emr2, =3D=3D, 0x00000000); + + exti_writel(EXTI_RTSR2, 0xFFFFFF00); + const uint32_t rtsr2 =3D exti_readl(EXTI_RTSR2); + g_assert_cmpuint(rtsr2, =3D=3D, 0x00000000); + + exti_writel(EXTI_FTSR2, 0xFFFFFF00); + const uint32_t ftsr2 =3D exti_readl(EXTI_FTSR2); + g_assert_cmpuint(ftsr2, =3D=3D, 0x00000000); + + exti_writel(EXTI_SWIER2, 0xFFFFFF00); + const uint32_t swier2 =3D exti_readl(EXTI_SWIER2); + g_assert_cmpuint(swier2, =3D=3D, 0x00000000); + + exti_writel(EXTI_PR2, 0xFFFFFF00); + const uint32_t pr2 =3D exti_readl(EXTI_PR2); + g_assert_cmpuint(pr2, =3D=3D, 0x00000000); +} + +static void test_software_interrupt(void) +{ + /* + * Test that we can launch a software irq by : + * - enabling its line in IMR + * - and then setting a bit from '0' to '1' in SWIER + * + * And that the interruption stays pending in NVIC + * even after clearing the pending bit in PR. + */ + + /* + * Testing interrupt line EXTI0 + * Bit 0 in EXTI_*1 registers (EXTI0) corresponds to GPIO Px_0 + */ + + enable_nvic_irq(EXTI0_IRQ); + /* Check that there are no interrupts already pending in PR */ + uint32_t pr1 =3D exti_readl(EXTI_PR1); + g_assert_cmpuint(pr1, =3D=3D, 0x00000000); + /* Check that this specific interrupt isn't pending in NVIC */ + g_assert_false(check_nvic_pending(EXTI0_IRQ)); + + /* Enable interrupt line EXTI0 */ + exti_writel(EXTI_IMR1, 0x00000001); + /* Set the right SWIER bit from '0' to '1' */ + exti_writel(EXTI_SWIER1, 0x00000000); + exti_writel(EXTI_SWIER1, 0x00000001); + + /* Check that the write in SWIER was effective */ + uint32_t swier1 =3D exti_readl(EXTI_SWIER1); + g_assert_cmpuint(swier1, =3D=3D, 0x00000001); + /* Check that the corresponding pending bit in PR is set */ + pr1 =3D exti_readl(EXTI_PR1); + g_assert_cmpuint(pr1, =3D=3D, 0x00000001); + /* Check that the corresponding interrupt is pending in the NVIC */ + g_assert_true(check_nvic_pending(EXTI0_IRQ)); + + /* Clear the pending bit in PR */ + exti_writel(EXTI_PR1, 0x00000001); + + /* Check that the write in PR was effective */ + pr1 =3D exti_readl(EXTI_PR1); + g_assert_cmpuint(pr1, =3D=3D, 0x00000000); + /* Check that the corresponding bit in SWIER was cleared */ + swier1 =3D exti_readl(EXTI_SWIER1); + g_assert_cmpuint(swier1, =3D=3D, 0x00000000); + /* Check that the interrupt is still pending in the NVIC */ + g_assert_true(check_nvic_pending(EXTI0_IRQ)); + + /* + * Testing interrupt line EXTI35 + * Bit 3 in EXTI_*2 registers (EXTI35) corresponds to PVM 1 Wakeup + */ + + enable_nvic_irq(EXTI35_IRQ); + /* Check that there are no interrupts already pending */ + uint32_t pr2 =3D exti_readl(EXTI_PR2); + g_assert_cmpuint(pr2, =3D=3D, 0x00000000); + g_assert_false(check_nvic_pending(EXTI35_IRQ)); + + /* Enable interrupt line EXTI0 */ + exti_writel(EXTI_IMR2, 0x00000008); + /* Set the right SWIER bit from '0' to '1' */ + exti_writel(EXTI_SWIER2, 0x00000000); + exti_writel(EXTI_SWIER2, 0x00000008); + + /* Check that the write in SWIER was effective */ + uint32_t swier2 =3D exti_readl(EXTI_SWIER2); + g_assert_cmpuint(swier2, =3D=3D, 0x00000008); + /* Check that the corresponding pending bit in PR is set */ + pr2 =3D exti_readl(EXTI_PR2); + g_assert_cmpuint(pr2, =3D=3D, 0x00000008); + /* Check that the corresponding interrupt is pending in the NVIC */ + g_assert_true(check_nvic_pending(EXTI35_IRQ)); + + /* Clear the pending bit in PR */ + exti_writel(EXTI_PR2, 0x00000008); + + /* Check that the write in PR was effective */ + pr2 =3D exti_readl(EXTI_PR2); + g_assert_cmpuint(pr2, =3D=3D, 0x00000000); + /* Check that the corresponding bit in SWIER was cleared */ + swier2 =3D exti_readl(EXTI_SWIER2); + g_assert_cmpuint(swier2, =3D=3D, 0x00000000); + /* Check that the interrupt is still pending in the NVIC */ + g_assert_true(check_nvic_pending(EXTI35_IRQ)); + + /* Clean NVIC */ + unpend_nvic_irq(EXTI0_IRQ); + g_assert_false(check_nvic_pending(EXTI0_IRQ)); + unpend_nvic_irq(EXTI35_IRQ); + g_assert_false(check_nvic_pending(EXTI35_IRQ)); +} + +static void test_edge_selector(void) +{ + enable_nvic_irq(EXTI0_IRQ); + + /* Configure EXTI line 0 irq on rising edge */ + qtest_set_irq_in(global_qtest, "/machine/unattached/device[0]/exti", + NULL, 0, 1); + exti_writel(EXTI_IMR1, 0x00000001); + exti_writel(EXTI_RTSR1, 0x00000001); + exti_writel(EXTI_FTSR1, 0x00000000); + + /* Test that an irq is raised on rising edge only */ + qtest_set_irq_in(global_qtest, "/machine/unattached/device[0]/exti", + NULL, 0, 0); + + uint32_t pr1 =3D exti_readl(EXTI_PR1); + g_assert_cmpuint(pr1, =3D=3D, 0x00000000); + g_assert_false(check_nvic_pending(EXTI0_IRQ)); + + qtest_set_irq_in(global_qtest, "/machine/unattached/device[0]/exti", + NULL, 0, 1); + + pr1 =3D exti_readl(EXTI_PR1); + g_assert_cmpuint(pr1, =3D=3D, 0x00000001); + g_assert_true(check_nvic_pending(EXTI0_IRQ)); + + /* Clean the test */ + exti_writel(EXTI_PR1, 0x00000001); + pr1 =3D exti_readl(EXTI_PR1); + g_assert_cmpuint(pr1, =3D=3D, 0x00000000); + unpend_nvic_irq(EXTI0_IRQ); + g_assert_false(check_nvic_pending(EXTI0_IRQ)); + + /* Configure EXTI line 0 irq on falling edge */ + qtest_set_irq_in(global_qtest, "/machine/unattached/device[0]/exti", + NULL, 0, 0); + exti_writel(EXTI_IMR1, 0x00000001); + exti_writel(EXTI_RTSR1, 0x00000000); + exti_writel(EXTI_FTSR1, 0x00000001); + + /* Test that an irq is raised on falling edge only */ + qtest_set_irq_in(global_qtest, "/machine/unattached/device[0]/exti", + NULL, 0, 1); + + pr1 =3D exti_readl(EXTI_PR1); + g_assert_cmpuint(pr1, =3D=3D, 0x00000000); + g_assert_false(check_nvic_pending(EXTI0_IRQ)); + + qtest_set_irq_in(global_qtest, "/machine/unattached/device[0]/exti", + NULL, 0, 0); + + pr1 =3D exti_readl(EXTI_PR1); + g_assert_cmpuint(pr1, =3D=3D, 0x00000001); + g_assert_true(check_nvic_pending(EXTI0_IRQ)); + + /* Clean the test */ + exti_writel(EXTI_PR1, 0x00000001); + pr1 =3D exti_readl(EXTI_PR1); + g_assert_cmpuint(pr1, =3D=3D, 0x00000000); + unpend_nvic_irq(EXTI0_IRQ); + g_assert_false(check_nvic_pending(EXTI0_IRQ)); + + /* Configure EXTI line 0 irq on falling and rising edge */ + exti_writel(EXTI_IMR1, 0x00000001); + exti_writel(EXTI_RTSR1, 0x00000001); + exti_writel(EXTI_FTSR1, 0x00000000); + + /* Test that an irq is raised on rising and falling edge */ + qtest_set_irq_in(global_qtest, "/machine/unattached/device[0]/exti", + NULL, 0, 1); + + pr1 =3D exti_readl(EXTI_PR1); + g_assert_cmpuint(pr1, =3D=3D, 0x00000001); + g_assert_true(check_nvic_pending(EXTI0_IRQ)); + + qtest_set_irq_in(global_qtest, "/machine/unattached/device[0]/exti", + NULL, 0, 0); + + pr1 =3D exti_readl(EXTI_PR1); + g_assert_cmpuint(pr1, =3D=3D, 0x00000001); + g_assert_true(check_nvic_pending(EXTI0_IRQ)); + + /* Clean the test */ + exti_writel(EXTI_PR1, 0x00000001); + pr1 =3D exti_readl(EXTI_PR1); + g_assert_cmpuint(pr1, =3D=3D, 0x00000000); + unpend_nvic_irq(EXTI0_IRQ); + g_assert_false(check_nvic_pending(EXTI0_IRQ)); + + /* Configure EXTI line 0 irq without selecting an edge trigger */ + exti_writel(EXTI_IMR1, 0x00000001); + exti_writel(EXTI_RTSR1, 0x00000000); + exti_writel(EXTI_FTSR1, 0x00000000); + + /* Test that no irq is raised */ + qtest_set_irq_in(global_qtest, "/machine/unattached/device[0]/exti", + NULL, 0, 1); + + pr1 =3D exti_readl(EXTI_PR1); + g_assert_cmpuint(pr1, =3D=3D, 0x00000000); + g_assert_false(check_nvic_pending(EXTI0_IRQ)); + + qtest_set_irq_in(global_qtest, "/machine/unattached/device[0]/exti", + NULL, 0, 0); + + pr1 =3D exti_readl(EXTI_PR1); + g_assert_cmpuint(pr1, =3D=3D, 0x00000000); + g_assert_false(check_nvic_pending(EXTI0_IRQ)); +} + +static void test_no_software_interrupt(void) +{ + /* + * Test that software irq doesn't happen when : + * - corresponding bit in IMR isn't set + * - SWIER is set to 1 before IMR is set to 1 + */ + + /* + * Testing interrupt line EXTI0 + * Bit 0 in EXTI_*1 registers (EXTI0) corresponds to GPIO Px_0 + */ + + enable_nvic_irq(EXTI0_IRQ); + /* Check that there are no interrupts already pending in PR */ + uint32_t pr1 =3D exti_readl(EXTI_PR1); + g_assert_cmpuint(pr1, =3D=3D, 0x00000000); + /* Check that this specific interrupt isn't pending in NVIC */ + g_assert_false(check_nvic_pending(EXTI0_IRQ)); + + /* Mask interrupt line EXTI0 */ + exti_writel(EXTI_IMR1, 0x00000000); + /* Set the corresponding SWIER bit from '0' to '1' */ + exti_writel(EXTI_SWIER1, 0x00000000); + exti_writel(EXTI_SWIER1, 0x00000001); + + /* Check that the write in SWIER was effective */ + uint32_t swier1 =3D exti_readl(EXTI_SWIER1); + g_assert_cmpuint(swier1, =3D=3D, 0x00000001); + /* Check that the pending bit in PR wasn't set */ + pr1 =3D exti_readl(EXTI_PR1); + g_assert_cmpuint(pr1, =3D=3D, 0x00000000); + /* Check that the interrupt isn't pending in NVIC */ + g_assert_false(check_nvic_pending(EXTI0_IRQ)); + + /* Enable interrupt line EXTI0 */ + exti_writel(EXTI_IMR1, 0x00000001); + + /* Check that the pending bit in PR wasn't set */ + pr1 =3D exti_readl(EXTI_PR1); + g_assert_cmpuint(pr1, =3D=3D, 0x00000000); + /* Check that the interrupt isn't pending in NVIC */ + g_assert_false(check_nvic_pending(EXTI0_IRQ)); + + /* + * Testing interrupt line EXTI35 + * Bit 3 in EXTI_*2 registers (EXTI35) corresponds to PVM 1 Wakeup + */ + + enable_nvic_irq(EXTI35_IRQ); + /* Check that there are no interrupts already pending in PR */ + uint32_t pr2 =3D exti_readl(EXTI_PR2); + g_assert_cmpuint(pr2, =3D=3D, 0x00000000); + /* Check that this specific interrupt isn't pending in NVIC */ + g_assert_false(check_nvic_pending(EXTI35_IRQ)); + + /* Mask interrupt line EXTI35 */ + exti_writel(EXTI_IMR2, 0x00000000); + /* Set the corresponding SWIER bit from '0' to '1' */ + exti_writel(EXTI_SWIER2, 0x00000000); + exti_writel(EXTI_SWIER2, 0x00000008); + + /* Check that the write in SWIER was effective */ + uint32_t swier2 =3D exti_readl(EXTI_SWIER2); + g_assert_cmpuint(swier2, =3D=3D, 0x00000008); + /* Check that the pending bit in PR wasn't set */ + pr2 =3D exti_readl(EXTI_PR2); + g_assert_cmpuint(pr2, =3D=3D, 0x00000000); + /* Check that the interrupt isn't pending in NVIC */ + g_assert_false(check_nvic_pending(EXTI35_IRQ)); + + /* Enable interrupt line EXTI35 */ + exti_writel(EXTI_IMR2, 0x00000008); + + /* Check that the pending bit in PR wasn't set */ + pr2 =3D exti_readl(EXTI_PR2); + g_assert_cmpuint(pr2, =3D=3D, 0x00000000); + /* Check that the interrupt isn't pending in NVIC */ + g_assert_false(check_nvic_pending(EXTI35_IRQ)); +} + +static void test_masked_interrupt(void) +{ + /* + * Test that irq doesn't happen when : + * - corresponding bit in IMR isn't set + * - SWIER is set to 1 before IMR is set to 1 + */ + + /* + * Testing interrupt line EXTI1 + * with rising edge from GPIOx pin 1 + */ + + enable_nvic_irq(EXTI1_IRQ); + /* Check that there are no interrupts already pending in PR */ + uint32_t pr1 =3D exti_readl(EXTI_PR1); + g_assert_cmpuint(pr1, =3D=3D, 0x00000000); + /* Check that this specific interrupt isn't pending in NVIC */ + g_assert_false(check_nvic_pending(EXTI1_IRQ)); + + /* Mask interrupt line EXTI1 */ + exti_writel(EXTI_IMR1, 0x00000000); + + /* Configure interrupt on rising edge */ + exti_writel(EXTI_RTSR1, 0x00000002); + + /* Simulate rising edge from GPIO line 1 */ + qtest_set_irq_in(global_qtest, "/machine/unattached/device[0]/exti", + NULL, 1, 1); + + /* Check that the pending bit in PR wasn't set */ + pr1 =3D exti_readl(EXTI_PR1); + g_assert_cmpuint(pr1, =3D=3D, 0x00000000); + /* Check that the interrupt isn't pending in NVIC */ + g_assert_false(check_nvic_pending(EXTI1_IRQ)); + + /* Enable interrupt line EXTI1 */ + exti_writel(EXTI_IMR1, 0x00000002); + + /* Check that the pending bit in PR wasn't set */ + pr1 =3D exti_readl(EXTI_PR1); + g_assert_cmpuint(pr1, =3D=3D, 0x00000000); + /* Check that the interrupt isn't pending in NVIC */ + g_assert_false(check_nvic_pending(EXTI1_IRQ)); +} + +static void test_interrupt(void) +{ + /* + * Test that we can launch an irq by : + * - enabling its line in IMR + * - configuring interrupt on rising edge + * - and then setting the input line from '0' to '1' + * + * And that the interruption stays pending in NVIC + * even after clearing the pending bit in PR. + */ + + /* + * Testing interrupt line EXTI1 + * with rising edge from GPIOx pin 1 + */ + + enable_nvic_irq(EXTI1_IRQ); + /* Check that there are no interrupts already pending in PR */ + uint32_t pr1 =3D exti_readl(EXTI_PR1); + g_assert_cmpuint(pr1, =3D=3D, 0x00000000); + /* Check that this specific interrupt isn't pending in NVIC */ + g_assert_false(check_nvic_pending(EXTI1_IRQ)); + + /* Enable interrupt line EXTI1 */ + exti_writel(EXTI_IMR1, 0x00000002); + + /* Configure interrupt on rising edge */ + exti_writel(EXTI_RTSR1, 0x00000002); + + /* Simulate rising edge from GPIO line 1 */ + qtest_set_irq_in(global_qtest, "/machine/unattached/device[0]/exti", + NULL, 1, 1); + + /* Check that the pending bit in PR was set */ + pr1 =3D exti_readl(EXTI_PR1); + g_assert_cmpuint(pr1, =3D=3D, 0x00000002); + /* Check that the interrupt is pending in NVIC */ + g_assert_true(check_nvic_pending(EXTI1_IRQ)); + + /* Clear the pending bit in PR */ + exti_writel(EXTI_PR1, 0x00000002); + + /* Check that the write in PR was effective */ + pr1 =3D exti_readl(EXTI_PR1); + g_assert_cmpuint(pr1, =3D=3D, 0x00000000); + /* Check that the interrupt is still pending in the NVIC */ + g_assert_true(check_nvic_pending(EXTI1_IRQ)); + + /* Clean NVIC */ + unpend_nvic_irq(EXTI1_IRQ); + g_assert_false(check_nvic_pending(EXTI1_IRQ)); +} + +int main(int argc, char **argv) +{ + int ret; + + g_test_init(&argc, &argv, NULL); + g_test_set_nonfatal_assertions(); + qtest_add_func("stm32l4x5/exti/direct_lines", test_direct_lines_write); + qtest_add_func("stm32l4x5/exti/reserved_bits", test_reserved_bits_writ= e); + qtest_add_func("stm32l4x5/exti/reg_write_read", test_reg_write_read); + qtest_add_func("stm32l4x5/exti/no_software_interrupt", + test_no_software_interrupt); + qtest_add_func("stm32l4x5/exti/software_interrupt", + test_software_interrupt); + qtest_add_func("stm32l4x5/exti/masked_interrupt", test_masked_interrup= t); + qtest_add_func("stm32l4x5/exti/interrupt", test_interrupt); + qtest_add_func("stm32l4x5/exti/test_edge_selector", test_edge_selector= ); + + qtest_start("-machine b-l475e-iot01a"); + ret =3D g_test_run(); + qtest_end(); + + return ret; +} --=20 2.43.0 From nobody Tue Nov 26 22:17:35 2024 Delivered-To: importer@patchew.org Authentication-Results: mx.zohomail.com; dkim=pass; spf=pass (zohomail.com: domain of gnu.org designates 209.51.188.17 as permitted sender) smtp.mailfrom=qemu-devel-bounces+importer=patchew.org@nongnu.org; dmarc=pass(p=none dis=none) header.from=telecom-paris.fr ARC-Seal: i=1; a=rsa-sha256; t=1703779668; cv=none; d=zohomail.com; s=zohoarc; b=WwSRbchnMg23gFp9+9XbB/qbuH/1kUTej6REi7nnYB/V90PxQumjBVBd1NBVHQLyiGkt7uT+2dzD11MQhwQbNxUQIlIKCauV1oIh2Jgi5dQaMJpFgpyFXgSIol3c2lucgFoE/bQI2M13455AUcDj0B0i0EEiEzWp/HUFP37aO9s= ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=zohomail.com; s=zohoarc; t=1703779668; h=Content-Type:Content-Transfer-Encoding:Cc:Cc:Date:Date:From:From:In-Reply-To:List-Subscribe:List-Post:List-Id:List-Archive:List-Help:List-Unsubscribe:MIME-Version:Message-ID:References:Sender:Subject:Subject:To:To:Message-Id:Reply-To; bh=XvTjD0GhPhtqUzN/jUsJejFiQl5qsoGcE2fMfXRqCzM=; b=jbDev9mQFpL9mFqSdfj36tSllIPczhJGmyCXpYH4uaAIOtK3cpfKbiUF4UOWDqLMduyaSA6kVRvWwCyze+A0z5zFkA96MrH9Ffjje18+s63rxk927s3f/FIphe4ep8BbiP3X+lVc1vGcrH+0OIoUwh8OA1Kmi114WcaBCTICyuM= ARC-Authentication-Results: i=1; mx.zohomail.com; dkim=pass; spf=pass (zohomail.com: domain of gnu.org designates 209.51.188.17 as permitted sender) smtp.mailfrom=qemu-devel-bounces+importer=patchew.org@nongnu.org; dmarc=pass header.from= (p=none dis=none) Return-Path: Received: from lists.gnu.org (lists.gnu.org [209.51.188.17]) by mx.zohomail.com with SMTPS id 1703779668489264.2166665833947; Thu, 28 Dec 2023 08:07:48 -0800 (PST) Received: from localhost ([::1] helo=lists1p.gnu.org) by lists.gnu.org with esmtp (Exim 4.90_1) (envelope-from ) id 1rIsuW-00023B-M5; Thu, 28 Dec 2023 11:07:04 -0500 Received: from eggs.gnu.org ([2001:470:142:3::10]) by lists.gnu.org with esmtps (TLS1.2:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.90_1) (envelope-from ) id 1rIsuV-00022m-3c; Thu, 28 Dec 2023 11:07:03 -0500 Received: from zproxy3.enst.fr ([137.194.2.222]) by eggs.gnu.org with esmtps (TLS1.2:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.90_1) (envelope-from ) id 1rIsuS-0007D4-PM; Thu, 28 Dec 2023 11:07:02 -0500 Received: from localhost (localhost [IPv6:::1]) by zproxy3.enst.fr (Postfix) with ESMTP id 6153AA0585; Thu, 28 Dec 2023 17:06:56 +0100 (CET) Received: from zproxy3.enst.fr ([IPv6:::1]) by localhost (zproxy3.enst.fr [IPv6:::1]) (amavis, port 10032) with ESMTP id kbZXC8VIS_bV; Thu, 28 Dec 2023 17:06:56 +0100 (CET) Received: from localhost (localhost [IPv6:::1]) by zproxy3.enst.fr (Postfix) with ESMTP id 0160BA051C; Thu, 28 Dec 2023 17:06:56 +0100 (CET) Received: from zproxy3.enst.fr ([IPv6:::1]) by localhost (zproxy3.enst.fr [IPv6:::1]) (amavis, port 10026) with ESMTP id Utt7ZjZzJTIG; Thu, 28 Dec 2023 17:06:55 +0100 (CET) Received: from inesv-Inspiron-3501.lan (unknown [IPv6:2001:861:4680:b1b0:3937:c54c:5417:70d4]) by zproxy3.enst.fr (Postfix) with ESMTPSA id B1286A063C; Thu, 28 Dec 2023 17:06:55 +0100 (CET) DKIM-Filter: OpenDKIM Filter v2.10.3 zproxy3.enst.fr 0160BA051C DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=telecom-paris.fr; s=A35C7578-1106-11E5-A17F-C303FDDA8F2E; t=1703779616; bh=XvTjD0GhPhtqUzN/jUsJejFiQl5qsoGcE2fMfXRqCzM=; h=From:To:Date:Message-ID:MIME-Version; b=kAct4Bpx2qPNBOciGkBslZXwZPyq/PJdeis4SekaBn4hehUrPdH89QaEt1EadPumv eurit/jAVBO77TZPsFXFq6DMqSrO5cSIyNznFRvZ1fBc42zaxpfUuyE6ggrIhTjG5r g3JuqKrfH/4Y20DAkdcCW9GpviCh+k3+87GLwOmM= X-Virus-Scanned: amavis at enst.fr From: =?UTF-8?q?In=C3=A8s=20Varhol?= To: qemu-devel@nongnu.org Cc: Alistair Francis , Thomas Huth , =?UTF-8?q?In=C3=A8s=20Varhol?= , Peter Maydell , Paolo Bonzini , Laurent Vivier , qemu-arm@nongnu.org, =?UTF-8?q?Philippe=20Mathieu-Daud=C3=A9?= , Arnaud Minier Subject: [PATCH v4 3/3] hw/arm: Connect STM32L4x5 EXTI to STM32L4x5 SoC Date: Thu, 28 Dec 2023 17:06:32 +0100 Message-ID: <20231228160649.299058-4-ines.varhol@telecom-paris.fr> X-Mailer: git-send-email 2.43.0 In-Reply-To: <20231228160649.299058-1-ines.varhol@telecom-paris.fr> References: <20231228160649.299058-1-ines.varhol@telecom-paris.fr> MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable Received-SPF: pass (zohomail.com: domain of gnu.org designates 209.51.188.17 as permitted sender) client-ip=209.51.188.17; envelope-from=qemu-devel-bounces+importer=patchew.org@nongnu.org; helo=lists.gnu.org; Received-SPF: pass client-ip=137.194.2.222; envelope-from=ines.varhol@telecom-paris.fr; helo=zproxy3.enst.fr X-Spam_score_int: -20 X-Spam_score: -2.1 X-Spam_bar: -- X-Spam_report: (-2.1 / 5.0 requ) BAYES_00=-1.9, DKIM_SIGNED=0.1, DKIM_VALID=-0.1, DKIM_VALID_AU=-0.1, DKIM_VALID_EF=-0.1, SPF_HELO_NONE=0.001, SPF_PASS=-0.001, T_SCC_BODY_TEXT_LINE=-0.01 autolearn=ham autolearn_force=no X-Spam_action: no action X-BeenThere: qemu-devel@nongnu.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: qemu-devel-bounces+importer=patchew.org@nongnu.org Sender: qemu-devel-bounces+importer=patchew.org@nongnu.org X-ZohoMail-DKIM: pass (identity @telecom-paris.fr) X-ZM-MESSAGEID: 1703779671061100002 Content-Type: text/plain; charset="utf-8" Signed-off-by: Arnaud Minier Signed-off-by: In=C3=A8s Varhol --- hw/arm/Kconfig | 1 + hw/arm/stm32l4x5_soc.c | 56 ++++++++++++++++++++++++++++++++-- include/hw/arm/stm32l4x5_soc.h | 3 ++ 3 files changed, 58 insertions(+), 2 deletions(-) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index 7520dc5cc0..9c9d5bb541 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -458,6 +458,7 @@ config STM32L4X5_SOC bool select ARM_V7M select OR_IRQ + select STM32L4X5_EXTI =20 config XLNX_ZYNQMP_ARM bool diff --git a/hw/arm/stm32l4x5_soc.c b/hw/arm/stm32l4x5_soc.c index 7513db0d6a..08b8a4c2ed 100644 --- a/hw/arm/stm32l4x5_soc.c +++ b/hw/arm/stm32l4x5_soc.c @@ -36,10 +36,51 @@ #define SRAM2_BASE_ADDRESS 0x10000000 #define SRAM2_SIZE (32 * KiB) =20 +#define EXTI_ADDR 0x40010400 + +#define NUM_EXTI_IRQ 40 +/* Match exti line connections with their CPU IRQ number */ +/* See Vector Table (Reference Manual p.396) */ +static const int exti_irq[NUM_EXTI_IRQ] =3D { + 6, /* GPIO[0] */ + 7, /* GPIO[1] */ + 8, /* GPIO[2] */ + 9, /* GPIO[3] */ + 10, /* GPIO[4] */ + 23, 23, 23, 23, 23, /* GPIO[5..9] */ + 40, 40, 40, 40, 40, 40, /* GPIO[10..15] */ + 1, /* PVD */ + 67, /* OTG_FS_WKUP, Direct */ + 41, /* RTC_ALARM */ + 2, /* RTC_TAMP_STAMP2/CSS_LSE */ + 3, /* RTC wakeup timer */ + 63, /* COMP1 */ + 63, /* COMP2 */ + 31, /* I2C1 wakeup, Direct */ + 33, /* I2C2 wakeup, Direct */ + 72, /* I2C3 wakeup, Direct */ + 37, /* USART1 wakeup, Direct */ + 38, /* USART2 wakeup, Direct */ + 39, /* USART3 wakeup, Direct */ + 52, /* UART4 wakeup, Direct */ + 53, /* UART4 wakeup, Direct */ + 70, /* LPUART1 wakeup, Direct */ + 65, /* LPTIM1, Direct */ + 66, /* LPTIM2, Direct */ + 76, /* SWPMI1 wakeup, Direct */ + 1, /* PVM1 wakeup */ + 1, /* PVM2 wakeup */ + 1, /* PVM3 wakeup */ + 1, /* PVM4 wakeup */ + 78 /* LCD wakeup, Direct */ +}; + static void stm32l4x5_soc_initfn(Object *obj) { Stm32l4x5SocState *s =3D STM32L4X5_SOC(obj); =20 + object_initialize_child(obj, "exti", &s->exti, TYPE_STM32L4X5_EXTI); + s->sysclk =3D qdev_init_clock_in(DEVICE(s), "sysclk", NULL, NULL, 0); s->refclk =3D qdev_init_clock_in(DEVICE(s), "refclk", NULL, NULL, 0); } @@ -50,7 +91,9 @@ static void stm32l4x5_soc_realize(DeviceState *dev_soc, E= rror **errp) Stm32l4x5SocState *s =3D STM32L4X5_SOC(dev_soc); const Stm32l4x5SocClass *sc =3D STM32L4X5_SOC_GET_CLASS(dev_soc); MemoryRegion *system_memory =3D get_system_memory(); - DeviceState *armv7m; + DeviceState *dev, *armv7m; + SysBusDevice *busdev; + int i; =20 /* * We use s->refclk internally and only define it with qdev_init_clock= _in() @@ -115,6 +158,16 @@ static void stm32l4x5_soc_realize(DeviceState *dev_soc= , Error **errp) return; } =20 + dev =3D DEVICE(&s->exti); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->exti), errp)) { + return; + } + busdev =3D SYS_BUS_DEVICE(dev); + sysbus_mmio_map(busdev, 0, EXTI_ADDR); + for (i =3D 0; i < NUM_EXTI_IRQ; i++) { + sysbus_connect_irq(busdev, i, qdev_get_gpio_in(armv7m, exti_irq[i]= )); + } + /* APB1 BUS */ create_unimplemented_device("TIM2", 0x40000000, 0x400); create_unimplemented_device("TIM3", 0x40000400, 0x400); @@ -155,7 +208,6 @@ static void stm32l4x5_soc_realize(DeviceState *dev_soc,= Error **errp) create_unimplemented_device("SYSCFG", 0x40010000, 0x30); create_unimplemented_device("VREFBUF", 0x40010030, 0x1D0); create_unimplemented_device("COMP", 0x40010200, 0x200); - create_unimplemented_device("EXTI", 0x40010400, 0x400); /* RESERVED: 0x40010800, 0x1400 */ create_unimplemented_device("FIREWALL", 0x40011C00, 0x400); /* RESERVED: 0x40012000, 0x800 */ diff --git a/include/hw/arm/stm32l4x5_soc.h b/include/hw/arm/stm32l4x5_soc.h index dce13a023d..6cba566a31 100644 --- a/include/hw/arm/stm32l4x5_soc.h +++ b/include/hw/arm/stm32l4x5_soc.h @@ -28,6 +28,7 @@ #include "qemu/units.h" #include "hw/qdev-core.h" #include "hw/arm/armv7m.h" +#include "hw/misc/stm32l4x5_exti.h" #include "qom/object.h" =20 #define TYPE_STM32L4X5_SOC "stm32l4x5-soc" @@ -41,6 +42,8 @@ struct Stm32l4x5SocState { =20 ARMv7MState armv7m; =20 + Stm32l4x5ExtiState exti; + MemoryRegion sram1; MemoryRegion sram2; MemoryRegion flash; --=20 2.43.0