The following changes since commit a2b5f8b8ab7b2c947823088103a40f0ff11fe06b: Merge tag 'pull-tcg-20230301' of https://gitlab.com/rth7680/qemu into staging (2023-03-01 19:19:20 +0000) are available in the Git repository at: https://github.com/legoater/qemu/ tags/pull-aspeed-20230302 for you to fetch changes up to b22a2d409b1acfdf0d63d1bb3595194ceb3d94da: aspeed/smc: Replace SysBus IRQs with GPIO lines (2023-03-02 13:57:50 +0100) ---------------------------------------------------------------- aspeed queue: * fix for the Aspeed I2C slave mode * a new I2C echo device from Klaus and its associated test in avocado. * initial SoC cleanups to allow the use of block devices instead of drives on the command line. * new facebook machines and eeprom fixes for the Fuji * readline fix ---------------------------------------------------------------- Cédric Le Goater (4): tests/avocado/machine_aspeed.py: Add an I2C slave test aspeed: Introduce a spi_boot region under the SoC aspeed: Add a boot_rom overlap region in the SoC spi_boot container aspeed/smc: Replace SysBus IRQs with GPIO lines Dongli Zhang (1): readline: fix hmp completion issue Karthikeyan Pasupathi (2): hw/arm/aspeed: Adding new machine Yosemitev2 in QEMU hw/arm/aspeed: Adding new machine Tiogapass in QEMU Klaus Jensen (2): hw/i2c: only schedule pending master when bus is idle hw/misc: add a toy i2c echo device Sittisak Sinprem (2): hw/at24c : modify at24c to support 1 byte address mode aspeed/fuji : correct the eeprom size docs/system/arm/aspeed.rst | 2 + hw/arm/aspeed_eeprom.h | 6 ++ include/hw/arm/aspeed_soc.h | 5 ++ include/hw/i2c/i2c.h | 2 + hw/arm/aspeed.c | 159 ++++++++++++++++++++++++++++------------ hw/arm/aspeed_ast2600.c | 13 ++++ hw/arm/aspeed_eeprom.c | 45 ++++++++++++ hw/arm/aspeed_soc.c | 14 ++++ hw/arm/fby35.c | 8 +- hw/i2c/aspeed_i2c.c | 2 + hw/i2c/core.c | 37 ++++++---- hw/misc/i2c-echo.c | 156 +++++++++++++++++++++++++++++++++++++++ hw/nvram/eeprom_at24c.c | 30 +++++++- hw/ssi/aspeed_smc.c | 5 +- monitor/hmp.c | 8 +- hw/misc/meson.build | 2 + tests/avocado/machine_aspeed.py | 10 +++ 17 files changed, 421 insertions(+), 83 deletions(-) create mode 100644 hw/misc/i2c-echo.c From: Dongli Zhang <dongli.zhang@oracle.com> The auto completion does not work in some cases. Case 1. 1. (qemu) info reg 2. Press 'Tab'. 3. It does not auto complete. Case 2. 1. (qemu) block_resize flo 2. Press 'Tab'. 3. It does not auto complete 'floppy0'. Since the readline_add_completion_of() may add any completion when strlen(pfx) is zero, we remove the check with (name[0] == '\0') because strlen() always returns zero in that case. Fixes: 52f50b1e9f8f ("readline: Extract readline_add_completion_of() from monitor") Cc: Joe Jin <joe.jin@oracle.com> Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Tested-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> --- monitor/hmp.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/monitor/hmp.c b/monitor/hmp.c index XXXXXXX..XXXXXXX 100644 --- a/monitor/hmp.c +++ b/monitor/hmp.c @@ -XXX,XX +XXX,XX @@ static void cmd_completion(MonitorHMP *mon, const char *name, const char *list) } memcpy(cmd, pstart, len); cmd[len] = '\0'; - if (name[0] == '\0') { - readline_add_completion_of(mon->rs, name, cmd); - } + readline_add_completion_of(mon->rs, name, cmd); if (*p == '\0') { break; } @@ -XXX,XX +XXX,XX @@ static void monitor_find_completion_by_table(MonitorHMP *mon, /* block device name completion */ readline_set_completion_index(mon->rs, strlen(str)); while ((blk = blk_next(blk)) != NULL) { - if (str[0] == '\0') { - readline_add_completion_of(mon->rs, str, blk_name(blk)); - } + readline_add_completion_of(mon->rs, str, blk_name(blk)); } break; case 's': -- 2.39.2 From: Klaus Jensen <k.jensen@samsung.com> It is not given that the current master will release the bus after a transfer ends. Only schedule a pending master if the bus is idle. Fixes: 37fa5ca42623 ("hw/i2c: support multiple masters") Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Acked-by: Corey Minyard <cminyard@mvista.com> Message-Id: <20221116084312.35808-2-its@irrelevant.dk> Signed-off-by: Cédric Le Goater <clg@kaod.org> --- include/hw/i2c/i2c.h | 2 ++ hw/i2c/aspeed_i2c.c | 2 ++ hw/i2c/core.c | 37 ++++++++++++++++++++++--------------- 3 files changed, 26 insertions(+), 15 deletions(-) diff --git a/include/hw/i2c/i2c.h b/include/hw/i2c/i2c.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/i2c/i2c.h +++ b/include/hw/i2c/i2c.h @@ -XXX,XX +XXX,XX @@ int i2c_start_send(I2CBus *bus, uint8_t address); */ int i2c_start_send_async(I2CBus *bus, uint8_t address); +void i2c_schedule_pending_master(I2CBus *bus); + void i2c_end_transfer(I2CBus *bus); void i2c_nack(I2CBus *bus); void i2c_ack(I2CBus *bus); diff --git a/hw/i2c/aspeed_i2c.c b/hw/i2c/aspeed_i2c.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/aspeed_i2c.c +++ b/hw/i2c/aspeed_i2c.c @@ -XXX,XX +XXX,XX @@ static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value) } SHARED_ARRAY_FIELD_DP32(bus->regs, reg_cmd, M_STOP_CMD, 0); aspeed_i2c_set_state(bus, I2CD_IDLE); + + i2c_schedule_pending_master(bus->bus); } if (aspeed_i2c_bus_pkt_mode_en(bus)) { diff --git a/hw/i2c/core.c b/hw/i2c/core.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/core.c +++ b/hw/i2c/core.c @@ -XXX,XX +XXX,XX @@ int i2c_start_transfer(I2CBus *bus, uint8_t address, bool is_recv) void i2c_bus_master(I2CBus *bus, QEMUBH *bh) { - if (i2c_bus_busy(bus)) { - I2CPendingMaster *node = g_new(struct I2CPendingMaster, 1); - node->bh = bh; + I2CPendingMaster *node = g_new(struct I2CPendingMaster, 1); + node->bh = bh; + + QSIMPLEQ_INSERT_TAIL(&bus->pending_masters, node, entry); +} + +void i2c_schedule_pending_master(I2CBus *bus) +{ + I2CPendingMaster *node; - QSIMPLEQ_INSERT_TAIL(&bus->pending_masters, node, entry); + if (i2c_bus_busy(bus)) { + /* someone is already controlling the bus; wait for it to release it */ + return; + } + if (QSIMPLEQ_EMPTY(&bus->pending_masters)) { return; } - bus->bh = bh; + node = QSIMPLEQ_FIRST(&bus->pending_masters); + bus->bh = node->bh; + + QSIMPLEQ_REMOVE_HEAD(&bus->pending_masters, entry); + g_free(node); + qemu_bh_schedule(bus->bh); } void i2c_bus_release(I2CBus *bus) { bus->bh = NULL; + + i2c_schedule_pending_master(bus); } int i2c_start_recv(I2CBus *bus, uint8_t address) @@ -XXX,XX +XXX,XX @@ void i2c_end_transfer(I2CBus *bus) g_free(node); } bus->broadcast = false; - - if (!QSIMPLEQ_EMPTY(&bus->pending_masters)) { - I2CPendingMaster *node = QSIMPLEQ_FIRST(&bus->pending_masters); - bus->bh = node->bh; - - QSIMPLEQ_REMOVE_HEAD(&bus->pending_masters, entry); - g_free(node); - - qemu_bh_schedule(bus->bh); - } } int i2c_send(I2CBus *bus, uint8_t data) -- 2.39.2 From: Klaus Jensen <k.jensen@samsung.com> Add an example I2C device to demonstrate how a slave may master the bus and send data asynchronously to another slave. The device will echo whatever it is sent to the device identified by the first byte received. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> [ clg: integrated fixes : https://lore.kernel.org/qemu-devel/Y3yMKAhOkYGtnkOp@cormorant.local/ ] Message-Id: <20220601210831.67259-7-its@irrelevant.dk> Signed-off-by: Cédric Le Goater <clg@kaod.org> --- hw/misc/i2c-echo.c | 156 ++++++++++++++++++++++++++++++++++++++++++++ hw/misc/meson.build | 2 + 2 files changed, 158 insertions(+) create mode 100644 hw/misc/i2c-echo.c diff --git a/hw/misc/i2c-echo.c b/hw/misc/i2c-echo.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/i2c-echo.c @@ -XXX,XX +XXX,XX @@ +#include "qemu/osdep.h" +#include "qemu/timer.h" +#include "qemu/main-loop.h" +#include "block/aio.h" +#include "hw/i2c/i2c.h" + +#define TYPE_I2C_ECHO "i2c-echo" +OBJECT_DECLARE_SIMPLE_TYPE(I2CEchoState, I2C_ECHO) + +enum i2c_echo_state { + I2C_ECHO_STATE_IDLE, + I2C_ECHO_STATE_START_SEND, + I2C_ECHO_STATE_ACK, +}; + +typedef struct I2CEchoState { + I2CSlave parent_obj; + + I2CBus *bus; + + enum i2c_echo_state state; + QEMUBH *bh; + + unsigned int pos; + uint8_t data[3]; +} I2CEchoState; + +static void i2c_echo_bh(void *opaque) +{ + I2CEchoState *state = opaque; + + switch (state->state) { + case I2C_ECHO_STATE_IDLE: + return; + + case I2C_ECHO_STATE_START_SEND: + if (i2c_start_send_async(state->bus, state->data[0])) { + goto release_bus; + } + + state->pos++; + state->state = I2C_ECHO_STATE_ACK; + return; + + case I2C_ECHO_STATE_ACK: + if (state->pos > 2) { + break; + } + + if (i2c_send_async(state->bus, state->data[state->pos++])) { + break; + } + + return; + } + + + i2c_end_transfer(state->bus); +release_bus: + i2c_bus_release(state->bus); + + state->state = I2C_ECHO_STATE_IDLE; +} + +static int i2c_echo_event(I2CSlave *s, enum i2c_event event) +{ + I2CEchoState *state = I2C_ECHO(s); + + switch (event) { + case I2C_START_RECV: + state->pos = 0; + + break; + + case I2C_START_SEND: + state->pos = 0; + + break; + + case I2C_FINISH: + state->pos = 0; + state->state = I2C_ECHO_STATE_START_SEND; + i2c_bus_master(state->bus, state->bh); + + break; + + case I2C_NACK: + break; + + default: + return -1; + } + + return 0; +} + +static uint8_t i2c_echo_recv(I2CSlave *s) +{ + I2CEchoState *state = I2C_ECHO(s); + + if (state->pos > 2) { + return 0xff; + } + + return state->data[state->pos++]; +} + +static int i2c_echo_send(I2CSlave *s, uint8_t data) +{ + I2CEchoState *state = I2C_ECHO(s); + + if (state->pos > 2) { + return -1; + } + + state->data[state->pos++] = data; + + return 0; +} + +static void i2c_echo_realize(DeviceState *dev, Error **errp) +{ + I2CEchoState *state = I2C_ECHO(dev); + BusState *bus = qdev_get_parent_bus(dev); + + state->bus = I2C_BUS(bus); + state->bh = qemu_bh_new(i2c_echo_bh, state); + + return; +} + +static void i2c_echo_class_init(ObjectClass *oc, void *data) +{ + I2CSlaveClass *sc = I2C_SLAVE_CLASS(oc); + DeviceClass *dc = DEVICE_CLASS(oc); + + dc->realize = i2c_echo_realize; + + sc->event = i2c_echo_event; + sc->recv = i2c_echo_recv; + sc->send = i2c_echo_send; +} + +static const TypeInfo i2c_echo = { + .name = TYPE_I2C_ECHO, + .parent = TYPE_I2C_SLAVE, + .instance_size = sizeof(I2CEchoState), + .class_init = i2c_echo_class_init, +}; + +static void register_types(void) +{ + type_register_static(&i2c_echo); +} + +type_init(register_types); diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_NRF51_SOC', if_true: files('nrf51_rng.c')) softmmu_ss.add(when: 'CONFIG_GRLIB', if_true: files('grlib_ahb_apb_pnp.c')) +softmmu_ss.add(when: 'CONFIG_I2C', if_true: files('i2c-echo.c')) + specific_ss.add(when: 'CONFIG_AVR_POWER', if_true: files('avr_power.c')) specific_ss.add(when: 'CONFIG_MAC_VIA', if_true: files('mac_via.c')) -- 2.39.2 The Aspeed 2600 I2C controller supports a slave mode which can be tested with the I2C echo device. Test extracted from : https://lists.nongnu.org/archive/html/qemu-devel/2022-06/msg00183.html Suggested-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> --- tests/avocado/machine_aspeed.py | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/tests/avocado/machine_aspeed.py b/tests/avocado/machine_aspeed.py index XXXXXXX..XXXXXXX 100644 --- a/tests/avocado/machine_aspeed.py +++ b/tests/avocado/machine_aspeed.py @@ -XXX,XX +XXX,XX @@ def test_arm_ast2600_evb_buildroot(self): 'tmp105,bus=aspeed.i2c.bus.3,address=0x4d,id=tmp-test'); self.vm.add_args('-device', 'ds1338,bus=aspeed.i2c.bus.3,address=0x32'); + self.vm.add_args('-device', + 'i2c-echo,bus=aspeed.i2c.bus.3,address=0x42'); self.do_test_arm_aspeed_buildroot_start(image_path, '0xf00') exec_command_and_wait_for_pattern(self, @@ -XXX,XX +XXX,XX @@ def test_arm_ast2600_evb_buildroot(self): year = time.strftime("%Y") exec_command_and_wait_for_pattern(self, 'hwclock -f /dev/rtc1', year); + exec_command_and_wait_for_pattern(self, + 'echo slave-24c02 0x1064 > /sys/bus/i2c/devices/i2c-3/new_device', + 'i2c i2c-3: new_device: Instantiated device slave-24c02 at 0x64'); + exec_command(self, 'i2cset -y 3 0x42 0x64 0x00 0xaa i'); + time.sleep(0.1) + exec_command_and_wait_for_pattern(self, + 'hexdump /sys/bus/i2c/devices/3-1064/slave-eeprom', + '0000000 ffaa ffff ffff ffff ffff ffff ffff ffff'); self.do_test_arm_aspeed_buildroot_poweroff() -- 2.39.2 From: Karthikeyan Pasupathi <pkarthikeyan1509@gmail.com> This patch support Yosemitev2 in QEMU environment. and introduced EEPROM BMC FRU data support "add fbyv2_bmc_fruid data" along with the machine support. Signed-off-by: Karthikeyan Pasupathi <pkarthikeyan1509@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> [ clg: - commit log topic update - Documentation update ] Message-Id: <20230216133326.216017-1-pkarthikeyan1509@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> --- docs/system/arm/aspeed.rst | 1 + hw/arm/aspeed_eeprom.h | 3 +++ hw/arm/aspeed.c | 31 +++++++++++++++++++++++++++++++ hw/arm/aspeed_eeprom.c | 23 +++++++++++++++++++++++ 4 files changed, 58 insertions(+) diff --git a/docs/system/arm/aspeed.rst b/docs/system/arm/aspeed.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/aspeed.rst +++ b/docs/system/arm/aspeed.rst @@ -XXX,XX +XXX,XX @@ AST2500 SoC based machines : - ``sonorapass-bmc`` OCP SonoraPass BMC - ``fp5280g2-bmc`` Inspur FP5280G2 BMC - ``g220a-bmc`` Bytedance G220A BMC +- ``yosemitev2-bmc`` Facebook YosemiteV2 BMC AST2600 SoC based machines : diff --git a/hw/arm/aspeed_eeprom.h b/hw/arm/aspeed_eeprom.h index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_eeprom.h +++ b/hw/arm/aspeed_eeprom.h @@ -XXX,XX +XXX,XX @@ extern const size_t fby35_nic_fruid_len; extern const size_t fby35_bb_fruid_len; extern const size_t fby35_bmc_fruid_len; +extern const uint8_t yosemitev2_bmc_fruid[]; +extern const size_t yosemitev2_bmc_fruid_len; + #endif diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ static void ast2600_evb_i2c_init(AspeedMachineState *bmc) TYPE_TMP105, 0x4d); } +static void yosemitev2_bmc_i2c_init(AspeedMachineState *bmc) +{ + AspeedSoCState *soc = &bmc->soc; + + at24c_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 4), 0x51, 128 * KiB); + at24c_eeprom_init_rom(aspeed_i2c_get_bus(&soc->i2c, 8), 0x51, 128 * KiB, + yosemitev2_bmc_fruid, yosemitev2_bmc_fruid_len); +} + static void romulus_bmc_i2c_init(AspeedMachineState *bmc) { AspeedSoCState *soc = &bmc->soc; @@ -XXX,XX +XXX,XX @@ static void aspeed_machine_ast2500_evb_class_init(ObjectClass *oc, void *data) aspeed_soc_num_cpus(amc->soc_name); }; +static void aspeed_machine_yosemitev2_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); + + mc->desc = "Facebook YosemiteV2 BMC (ARM1176)"; + amc->soc_name = "ast2500-a1"; + amc->hw_strap1 = AST2500_EVB_HW_STRAP1; + amc->hw_strap2 = 0; + amc->fmc_model = "n25q256a"; + amc->spi_model = "mx25l25635e"; + amc->num_cs = 2; + amc->i2c_init = yosemitev2_bmc_i2c_init; + mc->default_ram_size = 512 * MiB; + mc->default_cpus = mc->min_cpus = mc->max_cpus = + aspeed_soc_num_cpus(amc->soc_name); +}; + static void aspeed_machine_romulus_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); @@ -XXX,XX +XXX,XX @@ static const TypeInfo aspeed_machine_types[] = { .name = MACHINE_TYPE_NAME("ast2600-evb"), .parent = TYPE_ASPEED_MACHINE, .class_init = aspeed_machine_ast2600_evb_class_init, + }, { + .name = MACHINE_TYPE_NAME("yosemitev2-bmc"), + .parent = TYPE_ASPEED_MACHINE, + .class_init = aspeed_machine_yosemitev2_class_init, }, { .name = MACHINE_TYPE_NAME("tacoma-bmc"), .parent = TYPE_ASPEED_MACHINE, diff --git a/hw/arm/aspeed_eeprom.c b/hw/arm/aspeed_eeprom.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_eeprom.c +++ b/hw/arm/aspeed_eeprom.c @@ -XXX,XX +XXX,XX @@ const uint8_t fby35_bmc_fruid[] = { 0x6e, 0x66, 0x69, 0x67, 0x20, 0x41, 0xc1, 0x45, }; +/* Yosemite V2 BMC FRU */ +const uint8_t yosemitev2_bmc_fruid[] = { + 0x01, 0x00, 0x00, 0x01, 0x0d, 0x00, 0x00, 0xf1, 0x01, 0x0c, 0x00, 0x36, + 0xe6, 0xd0, 0xc6, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0xd2, 0x42, 0x4d, + 0x43, 0x20, 0x53, 0x74, 0x6f, 0x72, 0x61, 0x67, 0x65, 0x20, 0x4d, 0x6f, + 0x64, 0x75, 0x6c, 0x65, 0xcd, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, + 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0xce, 0x58, 0x58, 0x58, 0x58, 0x58, + 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0xc3, 0x31, 0x2e, + 0x30, 0xc9, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0xd2, + 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, + 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0xc1, 0x39, 0x01, 0x0c, 0x00, 0xc6, + 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0xd2, 0x59, 0x6f, 0x73, 0x65, 0x6d, + 0x69, 0x74, 0x65, 0x20, 0x56, 0x32, 0x2e, 0x30, 0x20, 0x45, 0x56, 0x54, + 0x32, 0xce, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, + 0x58, 0x58, 0x58, 0x58, 0xc4, 0x45, 0x56, 0x54, 0x32, 0xcd, 0x58, 0x58, + 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0xc7, + 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0xc3, 0x31, 0x2e, 0x30, 0xc9, + 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0xc8, 0x43, 0x6f, + 0x6e, 0x66, 0x69, 0x67, 0x20, 0x41, 0xc1, 0x45, +}; + const size_t fby35_nic_fruid_len = sizeof(fby35_nic_fruid); const size_t fby35_bb_fruid_len = sizeof(fby35_bb_fruid); const size_t fby35_bmc_fruid_len = sizeof(fby35_bmc_fruid); + +const size_t yosemitev2_bmc_fruid_len = sizeof(yosemitev2_bmc_fruid); -- 2.39.2 From: Karthikeyan Pasupathi <pkarthikeyan1509@gmail.com> This patch support Tiogapass in QEMU environment. and introduced EEPROM BMC FRU data support "add tiogapass_bmc_fruid data" along with the machine support. Signed-off-by: Karthikeyan Pasupathi <pkarthikeyan1509@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> [ clg: - commit log topic update - checkpatch issues - Documentation update ] Message-Id: <20230216184342.253868-1-pkarthikeyan1509@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> --- docs/system/arm/aspeed.rst | 1 + hw/arm/aspeed_eeprom.h | 3 +++ hw/arm/aspeed.c | 32 ++++++++++++++++++++++++++++++++ hw/arm/aspeed_eeprom.c | 22 ++++++++++++++++++++++ 4 files changed, 58 insertions(+) diff --git a/docs/system/arm/aspeed.rst b/docs/system/arm/aspeed.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/aspeed.rst +++ b/docs/system/arm/aspeed.rst @@ -XXX,XX +XXX,XX @@ AST2500 SoC based machines : - ``fp5280g2-bmc`` Inspur FP5280G2 BMC - ``g220a-bmc`` Bytedance G220A BMC - ``yosemitev2-bmc`` Facebook YosemiteV2 BMC +- ``tiogapass-bmc`` Facebook Tiogapass BMC AST2600 SoC based machines : diff --git a/hw/arm/aspeed_eeprom.h b/hw/arm/aspeed_eeprom.h index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_eeprom.h +++ b/hw/arm/aspeed_eeprom.h @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" +extern const uint8_t tiogapass_bmc_fruid[]; +extern const size_t tiogapass_bmc_fruid_len; + extern const uint8_t fby35_nic_fruid[]; extern const uint8_t fby35_bb_fruid[]; extern const uint8_t fby35_bmc_fruid[]; diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ static void romulus_bmc_i2c_init(AspeedMachineState *bmc) i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 11), "ds1338", 0x32); } +static void tiogapass_bmc_i2c_init(AspeedMachineState *bmc) +{ + AspeedSoCState *soc = &bmc->soc; + + at24c_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 4), 0x54, 128 * KiB); + at24c_eeprom_init_rom(aspeed_i2c_get_bus(&soc->i2c, 6), 0x54, 128 * KiB, + tiogapass_bmc_fruid, tiogapass_bmc_fruid_len); +} + static void create_pca9552(AspeedSoCState *soc, int bus_id, int addr) { i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, bus_id), @@ -XXX,XX +XXX,XX @@ static void aspeed_machine_romulus_class_init(ObjectClass *oc, void *data) aspeed_soc_num_cpus(amc->soc_name); }; +static void aspeed_machine_tiogapass_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); + + mc->desc = "Facebook Tiogapass BMC (ARM1176)"; + amc->soc_name = "ast2500-a1"; + amc->hw_strap1 = AST2500_EVB_HW_STRAP1; + amc->hw_strap2 = 0; + amc->fmc_model = "n25q256a"; + amc->spi_model = "mx25l25635e"; + amc->num_cs = 2; + amc->i2c_init = tiogapass_bmc_i2c_init; + mc->default_ram_size = 1 * GiB; + mc->default_cpus = mc->min_cpus = mc->max_cpus = + aspeed_soc_num_cpus(amc->soc_name); + aspeed_soc_num_cpus(amc->soc_name); +}; + static void aspeed_machine_sonorapass_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); @@ -XXX,XX +XXX,XX @@ static const TypeInfo aspeed_machine_types[] = { .name = MACHINE_TYPE_NAME("tacoma-bmc"), .parent = TYPE_ASPEED_MACHINE, .class_init = aspeed_machine_tacoma_class_init, + }, { + .name = MACHINE_TYPE_NAME("tiogapass-bmc"), + .parent = TYPE_ASPEED_MACHINE, + .class_init = aspeed_machine_tiogapass_class_init, }, { .name = MACHINE_TYPE_NAME("g220a-bmc"), .parent = TYPE_ASPEED_MACHINE, diff --git a/hw/arm/aspeed_eeprom.c b/hw/arm/aspeed_eeprom.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_eeprom.c +++ b/hw/arm/aspeed_eeprom.c @@ -XXX,XX +XXX,XX @@ #include "aspeed_eeprom.h" +/* Tiogapass BMC FRU */ +const uint8_t tiogapass_bmc_fruid[] = { + 0x01, 0x00, 0x00, 0x01, 0x0d, 0x00, 0x00, 0xf1, 0x01, 0x0c, 0x00, 0x36, + 0xe6, 0xd0, 0xc6, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0xd2, 0x42, 0x4d, + 0x43, 0x20, 0x53, 0x74, 0x6f, 0x72, 0x61, 0x67, 0x65, 0x20, 0x4d, 0x6f, + 0x64, 0x75, 0x6c, 0x65, 0xcd, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, + 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0xce, 0x58, 0x58, 0x58, 0x58, 0x58, + 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0xc3, 0x31, 0x2e, + 0x30, 0xc9, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0xd2, + 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, + 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0xc1, 0x39, 0x01, 0x0c, 0x00, 0xc6, + 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0xd2, 0x54, 0x69, 0x6f, 0x67, 0x61, + 0x20, 0x50, 0x61, 0x73, 0x73, 0x20, 0x53, 0x69, 0x6e, 0x67, 0x6c, 0x65, + 0x32, 0xce, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, + 0x58, 0x58, 0x58, 0x58, 0xc4, 0x58, 0x58, 0x58, 0x32, 0xcd, 0x58, 0x58, + 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0xc7, + 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0xc3, 0x31, 0x2e, 0x30, 0xc9, + 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0xc8, 0x43, 0x6f, + 0x6e, 0x66, 0x69, 0x67, 0x20, 0x41, 0xc1, 0x45, +}; + const uint8_t fby35_nic_fruid[] = { 0x01, 0x00, 0x00, 0x01, 0x0f, 0x20, 0x00, 0xcf, 0x01, 0x0e, 0x19, 0xd7, 0x5e, 0xcf, 0xc8, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58, 0xdd, @@ -XXX,XX +XXX,XX @@ const uint8_t yosemitev2_bmc_fruid[] = { 0x6e, 0x66, 0x69, 0x67, 0x20, 0x41, 0xc1, 0x45, }; +const size_t tiogapass_bmc_fruid_len = sizeof(tiogapass_bmc_fruid); const size_t fby35_nic_fruid_len = sizeof(fby35_nic_fruid); const size_t fby35_bb_fruid_len = sizeof(fby35_bb_fruid); const size_t fby35_bmc_fruid_len = sizeof(fby35_bmc_fruid); -- 2.39.2 From: Sittisak Sinprem <ssinprem@celestica.com> Signed-off-by: Sittisak Sinprem <ssinprem@celestica.com> Reviewed-by: Peter Delevoryas <peter@pjd.dev> [ clg: checkpatch issues ] Message-Id: <167660539263.10409.9736070122710923479-1@git.sr.ht> Signed-off-by: Cédric Le Goater <clg@kaod.org> --- hw/nvram/eeprom_at24c.c | 30 +++++++++++++++++++++++++++--- 1 file changed, 27 insertions(+), 3 deletions(-) diff --git a/hw/nvram/eeprom_at24c.c b/hw/nvram/eeprom_at24c.c index XXXXXXX..XXXXXXX 100644 --- a/hw/nvram/eeprom_at24c.c +++ b/hw/nvram/eeprom_at24c.c @@ -XXX,XX +XXX,XX @@ struct EEPROMState { uint16_t cur; /* total size in bytes */ uint32_t rsize; + /* + * address byte number + * for 24c01, 24c02 size <= 256 byte, use only 1 byte + * otherwise size > 256, use 2 byte + */ + uint8_t asize; + bool writable; /* cells changed since last START? */ bool changed; @@ -XXX,XX +XXX,XX @@ uint8_t at24c_eeprom_recv(I2CSlave *s) EEPROMState *ee = AT24C_EE(s); uint8_t ret; - if (ee->haveaddr == 1) { + /* + * If got the byte address but not completely with address size + * will return the invalid value + */ + if (ee->haveaddr > 0 && ee->haveaddr < ee->asize) { return 0xff; } @@ -XXX,XX +XXX,XX @@ int at24c_eeprom_send(I2CSlave *s, uint8_t data) { EEPROMState *ee = AT24C_EE(s); - if (ee->haveaddr < 2) { + if (ee->haveaddr < ee->asize) { ee->cur <<= 8; ee->cur |= data; ee->haveaddr++; - if (ee->haveaddr == 2) { + if (ee->haveaddr == ee->asize) { ee->cur %= ee->rsize; DPRINTK("Set pointer %04x\n", ee->cur); } @@ -XXX,XX +XXX,XX @@ static void at24c_eeprom_realize(DeviceState *dev, Error **errp) } DPRINTK("Reset read backing file\n"); } + + /* + * If address size didn't define with property set + * value is 0 as default, setting it by Rom size detecting. + */ + if (ee->asize == 0) { + if (ee->rsize <= 256) { + ee->asize = 1; + } else { + ee->asize = 2; + } + } } static @@ -XXX,XX +XXX,XX @@ void at24c_eeprom_reset(DeviceState *state) static Property at24c_eeprom_props[] = { DEFINE_PROP_UINT32("rom-size", EEPROMState, rsize, 0), + DEFINE_PROP_UINT8("address-size", EEPROMState, asize, 0), DEFINE_PROP_BOOL("writable", EEPROMState, writable, true), DEFINE_PROP_DRIVE("drive", EEPROMState, blk), DEFINE_PROP_END_OF_LIST() -- 2.39.2 From: Sittisak Sinprem <ssinprem@celestica.com> Device 24C64 the size is 64 kilobits = 8kilobyte Device 24C02 the size is 2 kilobits = 256byte Signed-off-by: Sittisak Sinprem <ssinprem@celestica.com> Reviewed-by: Peter Delevoryas <peter@pjd.dev> [ clg: checkpatch issues ] Message-Id: <167660539263.10409.9736070122710923479-2@git.sr.ht> Signed-off-by: Cédric Le Goater <clg@kaod.org> --- hw/arm/aspeed.c | 36 ++++++++++++++++++++---------------- 1 file changed, 20 insertions(+), 16 deletions(-) diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ static void fuji_bmc_i2c_init(AspeedMachineState *bmc) i2c_slave_create_simple(i2c[17], TYPE_LM75, 0x4c); i2c_slave_create_simple(i2c[17], TYPE_LM75, 0x4d); - at24c_eeprom_init(i2c[19], 0x52, 64 * KiB); - at24c_eeprom_init(i2c[20], 0x50, 2 * KiB); - at24c_eeprom_init(i2c[22], 0x52, 2 * KiB); + /* + * EEPROM 24c64 size is 64Kbits or 8 Kbytes + * 24c02 size is 2Kbits or 256 bytes + */ + at24c_eeprom_init(i2c[19], 0x52, 8 * KiB); + at24c_eeprom_init(i2c[20], 0x50, 256); + at24c_eeprom_init(i2c[22], 0x52, 256); i2c_slave_create_simple(i2c[3], TYPE_LM75, 0x48); i2c_slave_create_simple(i2c[3], TYPE_LM75, 0x49); i2c_slave_create_simple(i2c[3], TYPE_LM75, 0x4a); i2c_slave_create_simple(i2c[3], TYPE_TMP422, 0x4c); - at24c_eeprom_init(i2c[8], 0x51, 64 * KiB); + at24c_eeprom_init(i2c[8], 0x51, 8 * KiB); i2c_slave_create_simple(i2c[8], TYPE_LM75, 0x4a); i2c_slave_create_simple(i2c[50], TYPE_LM75, 0x4c); - at24c_eeprom_init(i2c[50], 0x52, 64 * KiB); + at24c_eeprom_init(i2c[50], 0x52, 8 * KiB); i2c_slave_create_simple(i2c[51], TYPE_TMP75, 0x48); i2c_slave_create_simple(i2c[52], TYPE_TMP75, 0x49); i2c_slave_create_simple(i2c[59], TYPE_TMP75, 0x48); i2c_slave_create_simple(i2c[60], TYPE_TMP75, 0x49); - at24c_eeprom_init(i2c[65], 0x53, 64 * KiB); + at24c_eeprom_init(i2c[65], 0x53, 8 * KiB); i2c_slave_create_simple(i2c[66], TYPE_TMP75, 0x49); i2c_slave_create_simple(i2c[66], TYPE_TMP75, 0x48); - at24c_eeprom_init(i2c[68], 0x52, 64 * KiB); - at24c_eeprom_init(i2c[69], 0x52, 64 * KiB); - at24c_eeprom_init(i2c[70], 0x52, 64 * KiB); - at24c_eeprom_init(i2c[71], 0x52, 64 * KiB); + at24c_eeprom_init(i2c[68], 0x52, 8 * KiB); + at24c_eeprom_init(i2c[69], 0x52, 8 * KiB); + at24c_eeprom_init(i2c[70], 0x52, 8 * KiB); + at24c_eeprom_init(i2c[71], 0x52, 8 * KiB); - at24c_eeprom_init(i2c[73], 0x53, 64 * KiB); + at24c_eeprom_init(i2c[73], 0x53, 8 * KiB); i2c_slave_create_simple(i2c[74], TYPE_TMP75, 0x49); i2c_slave_create_simple(i2c[74], TYPE_TMP75, 0x48); - at24c_eeprom_init(i2c[76], 0x52, 64 * KiB); - at24c_eeprom_init(i2c[77], 0x52, 64 * KiB); - at24c_eeprom_init(i2c[78], 0x52, 64 * KiB); - at24c_eeprom_init(i2c[79], 0x52, 64 * KiB); - at24c_eeprom_init(i2c[28], 0x50, 2 * KiB); + at24c_eeprom_init(i2c[76], 0x52, 8 * KiB); + at24c_eeprom_init(i2c[77], 0x52, 8 * KiB); + at24c_eeprom_init(i2c[78], 0x52, 8 * KiB); + at24c_eeprom_init(i2c[79], 0x52, 8 * KiB); + at24c_eeprom_init(i2c[28], 0x50, 256); for (int i = 0; i < 8; i++) { at24c_eeprom_init(i2c[81 + i * 8], 0x56, 64 * KiB); -- 2.39.2 The default boot address of the Aspeed SoCs is 0x0. For this reason, the FMC flash device contents are remapped by HW on the first 256MB of the address space. In QEMU, this is currently done in the machine init with the setup of a region alias. Move this code to the SoC and introduce an extra container to prepare ground for the boot ROM region which will overlap the FMC flash remapping. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> --- include/hw/arm/aspeed_soc.h | 5 +++++ hw/arm/aspeed.c | 13 +------------ hw/arm/aspeed_ast2600.c | 13 +++++++++++++ hw/arm/aspeed_soc.c | 14 ++++++++++++++ hw/arm/fby35.c | 8 +------- 5 files changed, 34 insertions(+), 19 deletions(-) diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/aspeed_soc.h +++ b/include/hw/arm/aspeed_soc.h @@ -XXX,XX +XXX,XX @@ struct AspeedSoCState { MemoryRegion *dram_mr; MemoryRegion dram_container; MemoryRegion sram; + MemoryRegion spi_boot_container; + MemoryRegion spi_boot; AspeedVICState vic; AspeedRtcState rtc; AspeedTimerCtrlState timerctrl; @@ -XXX,XX +XXX,XX @@ struct AspeedSoCClass { enum { + ASPEED_DEV_SPI_BOOT, ASPEED_DEV_IOMEM, ASPEED_DEV_UART1, ASPEED_DEV_UART2, @@ -XXX,XX +XXX,XX @@ enum { ASPEED_DEV_JTAG1, }; +#define ASPEED_SOC_SPI_BOOT_ADDR 0x0 + qemu_irq aspeed_soc_get_irq(AspeedSoCState *s, int dev); bool aspeed_soc_uart_realize(AspeedSoCState *s, Error **errp); void aspeed_soc_uart_set_chr(AspeedSoCState *s, int dev, Chardev *chr); diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ static void aspeed_machine_init(MachineState *machine) MemoryRegion *boot_rom = g_new(MemoryRegion, 1); uint64_t size = memory_region_size(&fl->mmio); - /* - * create a ROM region using the default mapping window size of - * the flash module. The window size is 64MB for the AST2400 - * SoC and 128MB for the AST2500 SoC, which is twice as big as - * needed by the flash modules of the Aspeed machines. - */ - if (ASPEED_MACHINE(machine)->mmio_exec) { - memory_region_init_alias(boot_rom, NULL, "aspeed.boot_rom", - &fl->mmio, 0, size); - memory_region_add_subregion(get_system_memory(), FIRMWARE_ADDR, - boot_rom); - } else { + if (!ASPEED_MACHINE(machine)->mmio_exec) { memory_region_init_rom(boot_rom, NULL, "aspeed.boot_rom", size, &error_abort); memory_region_add_subregion(get_system_memory(), FIRMWARE_ADDR, diff --git a/hw/arm/aspeed_ast2600.c b/hw/arm/aspeed_ast2600.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_ast2600.c +++ b/hw/arm/aspeed_ast2600.c @@ -XXX,XX +XXX,XX @@ #define ASPEED_SOC_DPMCU_SIZE 0x00040000 static const hwaddr aspeed_soc_ast2600_memmap[] = { + [ASPEED_DEV_SPI_BOOT] = ASPEED_SOC_SPI_BOOT_ADDR, [ASPEED_DEV_SRAM] = 0x10000000, [ASPEED_DEV_DPMCU] = 0x18000000, /* 0x16000000 0x17FFFFFF : AHB BUS do LPC Bus bridge */ @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp) qemu_irq irq; g_autofree char *sram_name = NULL; + /* Default boot region (SPI memory or ROMs) */ + memory_region_init(&s->spi_boot_container, OBJECT(s), + "aspeed.spi_boot_container", 0x10000000); + memory_region_add_subregion(s->memory, sc->memmap[ASPEED_DEV_SPI_BOOT], + &s->spi_boot_container); + /* IO space */ aspeed_mmio_map_unimplemented(s, SYS_BUS_DEVICE(&s->iomem), "aspeed.io", sc->memmap[ASPEED_DEV_IOMEM], @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp) sysbus_connect_irq(SYS_BUS_DEVICE(&s->fmc), 0, aspeed_soc_get_irq(s, ASPEED_DEV_FMC)); + /* Set up an alias on the FMC CE0 region (boot default) */ + MemoryRegion *fmc0_mmio = &s->fmc.flashes[0].mmio; + memory_region_init_alias(&s->spi_boot, OBJECT(s), "aspeed.spi_boot", + fmc0_mmio, 0, memory_region_size(fmc0_mmio)); + memory_region_add_subregion(&s->spi_boot_container, 0x0, &s->spi_boot); + /* SPI */ for (i = 0; i < sc->spis_num; i++) { object_property_set_link(OBJECT(&s->spi[i]), "dram", diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_soc.c +++ b/hw/arm/aspeed_soc.c @@ -XXX,XX +XXX,XX @@ #define ASPEED_SOC_IOMEM_SIZE 0x00200000 static const hwaddr aspeed_soc_ast2400_memmap[] = { + [ASPEED_DEV_SPI_BOOT] = ASPEED_SOC_SPI_BOOT_ADDR, [ASPEED_DEV_IOMEM] = 0x1E600000, [ASPEED_DEV_FMC] = 0x1E620000, [ASPEED_DEV_SPI1] = 0x1E630000, @@ -XXX,XX +XXX,XX @@ static const hwaddr aspeed_soc_ast2400_memmap[] = { }; static const hwaddr aspeed_soc_ast2500_memmap[] = { + [ASPEED_DEV_SPI_BOOT] = ASPEED_SOC_SPI_BOOT_ADDR, [ASPEED_DEV_IOMEM] = 0x1E600000, [ASPEED_DEV_FMC] = 0x1E620000, [ASPEED_DEV_SPI1] = 0x1E630000, @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) Error *err = NULL; g_autofree char *sram_name = NULL; + /* Default boot region (SPI memory or ROMs) */ + memory_region_init(&s->spi_boot_container, OBJECT(s), + "aspeed.spi_boot_container", 0x10000000); + memory_region_add_subregion(s->memory, sc->memmap[ASPEED_DEV_SPI_BOOT], + &s->spi_boot_container); + /* IO space */ aspeed_mmio_map_unimplemented(s, SYS_BUS_DEVICE(&s->iomem), "aspeed.io", sc->memmap[ASPEED_DEV_IOMEM], @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) sysbus_connect_irq(SYS_BUS_DEVICE(&s->fmc), 0, aspeed_soc_get_irq(s, ASPEED_DEV_FMC)); + /* Set up an alias on the FMC CE0 region (boot default) */ + MemoryRegion *fmc0_mmio = &s->fmc.flashes[0].mmio; + memory_region_init_alias(&s->spi_boot, OBJECT(s), "aspeed.spi_boot", + fmc0_mmio, 0, memory_region_size(fmc0_mmio)); + memory_region_add_subregion(&s->spi_boot_container, 0x0, &s->spi_boot); + /* SPI */ for (i = 0; i < sc->spis_num; i++) { if (!sysbus_realize(SYS_BUS_DEVICE(&s->spi[i]), errp)) { diff --git a/hw/arm/fby35.c b/hw/arm/fby35.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fby35.c +++ b/hw/arm/fby35.c @@ -XXX,XX +XXX,XX @@ static void fby35_bmc_init(Fby35State *s) MemoryRegion *boot_rom = g_new(MemoryRegion, 1); uint64_t size = memory_region_size(&fl->mmio); - if (s->mmio_exec) { - memory_region_init_alias(boot_rom, NULL, "aspeed.boot_rom", - &fl->mmio, 0, size); - memory_region_add_subregion(&s->bmc_memory, FBY35_BMC_FIRMWARE_ADDR, - boot_rom); - } else { - + if (!s->mmio_exec) { memory_region_init_rom(boot_rom, NULL, "aspeed.boot_rom", size, &error_abort); memory_region_add_subregion(&s->bmc_memory, FBY35_BMC_FIRMWARE_ADDR, -- 2.39.2 To avoid the SPI transactions fetching instructions from the FMC CE0 flash device and speed up boot, a ROM can be created if a drive is available. Reverse the logic to allow a machine to boot without a drive, using a block device instead : -blockdev node-name=fmc0,driver=file,filename=/path/to/flash.img \ -device mx66u51235f,bus=ssi.0,drive=fmc0 Signed-off-by: Cédric Le Goater <clg@kaod.org> --- hw/arm/aspeed.c | 47 +++++++++++++++++++++++++++-------------------- 1 file changed, 27 insertions(+), 20 deletions(-) diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ static void aspeed_reset_secondary(ARMCPU *cpu, cpu_set_pc(cs, info->smp_loader_start); } -#define FIRMWARE_ADDR 0x0 - -static void write_boot_rom(DriveInfo *dinfo, hwaddr addr, size_t rom_size, +static void write_boot_rom(BlockBackend *blk, hwaddr addr, size_t rom_size, Error **errp) { - BlockBackend *blk = blk_by_legacy_dinfo(dinfo); g_autofree void *storage = NULL; int64_t size; @@ -XXX,XX +XXX,XX @@ static void write_boot_rom(DriveInfo *dinfo, hwaddr addr, size_t rom_size, rom_add_blob_fixed("aspeed.boot_rom", storage, rom_size, addr); } +/* + * Create a ROM and copy the flash contents at the expected address + * (0x0). Boots faster than execute-in-place. + */ +static void aspeed_install_boot_rom(AspeedSoCState *soc, BlockBackend *blk, + uint64_t rom_size) +{ + MemoryRegion *boot_rom = g_new(MemoryRegion, 1); + + memory_region_init_rom(boot_rom, NULL, "aspeed.boot_rom", rom_size, + &error_abort); + memory_region_add_subregion_overlap(&soc->spi_boot_container, 0, + boot_rom, 1); + write_boot_rom(blk, ASPEED_SOC_SPI_BOOT_ADDR, rom_size, &error_abort); +} + void aspeed_board_init_flashes(AspeedSMCState *s, const char *flashtype, unsigned int count, int unit0) { @@ -XXX,XX +XXX,XX @@ static void aspeed_machine_init(MachineState *machine) AspeedMachineState *bmc = ASPEED_MACHINE(machine); AspeedMachineClass *amc = ASPEED_MACHINE_GET_CLASS(machine); AspeedSoCClass *sc; - DriveInfo *drive0 = drive_get(IF_MTD, 0, 0); int i; NICInfo *nd = &nd_table[0]; @@ -XXX,XX +XXX,XX @@ static void aspeed_machine_init(MachineState *machine) bmc->spi_model ? bmc->spi_model : amc->spi_model, 1, amc->num_cs); - /* Install first FMC flash content as a boot rom. */ - if (drive0) { - AspeedSMCFlash *fl = &bmc->soc.fmc.flashes[0]; - MemoryRegion *boot_rom = g_new(MemoryRegion, 1); - uint64_t size = memory_region_size(&fl->mmio); - - if (!ASPEED_MACHINE(machine)->mmio_exec) { - memory_region_init_rom(boot_rom, NULL, "aspeed.boot_rom", - size, &error_abort); - memory_region_add_subregion(get_system_memory(), FIRMWARE_ADDR, - boot_rom); - write_boot_rom(drive0, FIRMWARE_ADDR, size, &error_abort); - } - } - if (machine->kernel_filename && sc->num_cpus > 1) { /* With no u-boot we must set up a boot stub for the secondary CPU */ MemoryRegion *smpboot = g_new(MemoryRegion, 1); @@ -XXX,XX +XXX,XX @@ static void aspeed_machine_init(MachineState *machine) drive_get(IF_SD, 0, bmc->soc.sdhci.num_slots)); } + if (!bmc->mmio_exec) { + DriveInfo *mtd0 = drive_get(IF_MTD, 0, 0); + + if (mtd0) { + uint64_t rom_size = memory_region_size(&bmc->soc.spi_boot); + aspeed_install_boot_rom(&bmc->soc, blk_by_legacy_dinfo(mtd0), + rom_size); + } + } + arm_load_kernel(ARM_CPU(first_cpu), machine, &aspeed_board_binfo); } -- 2.39.2 It's cleaner and removes the curious '+ 1' required to skip the DMA IRQ line of the controller. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> --- hw/arm/aspeed.c | 2 +- hw/ssi/aspeed_smc.c | 5 +---- 2 files changed, 2 insertions(+), 5 deletions(-) diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ void aspeed_board_init_flashes(AspeedSMCState *s, const char *flashtype, qdev_realize_and_unref(dev, BUS(s->spi), &error_fatal); cs_line = qdev_get_gpio_in_named(dev, SSI_GPIO_CS, 0); - sysbus_connect_irq(SYS_BUS_DEVICE(s), i + 1, cs_line); + qdev_connect_gpio_out_named(DEVICE(s), "cs", i, cs_line); } } diff --git a/hw/ssi/aspeed_smc.c b/hw/ssi/aspeed_smc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/aspeed_smc.c +++ b/hw/ssi/aspeed_smc.c @@ -XXX,XX +XXX,XX @@ static void aspeed_smc_realize(DeviceState *dev, Error **errp) /* Setup cs_lines for peripherals */ s->cs_lines = g_new0(qemu_irq, asc->cs_num_max); - - for (i = 0; i < asc->cs_num_max; ++i) { - sysbus_init_irq(sbd, &s->cs_lines[i]); - } + qdev_init_gpio_out_named(DEVICE(s), s->cs_lines, "cs", asc->cs_num_max); /* The memory region for the controller registers */ memory_region_init_io(&s->mmio, OBJECT(s), &aspeed_smc_ops, s, -- 2.39.2 The following changes since commit c77283dd5d79149f4e7e9edd00f65416c648ee59: Merge tag 'pull-request-2025-07-02' of https://gitlab.com/thuth/qemu into staging (2025-07-03 06:01:41 -0400) are available in the Git repository at: https://github.com/legoater/qemu/ tags/pull-aspeed-20250704 for you to fetch changes up to 3a34dad2c0d25cebafed40696bbbdeb7ff4b9c7d: tests/functional: Add gb200 tests (2025-07-03 17:36:45 +0200) ---------------------------------------------------------------- aspeed queue: * Improved AST2700 SoC modeling (SDMC, SCU) * Fixed hardware strapping of 'bletchley-bmc' machine * Added new Meta 'catalina-bmc' machine and functional test using OpenBMC * Improved AST2600 SCU protection key modeling * Introduced AST2600 SCU unit tests * Deprecated 'ast2700a0-evb' machine * Added new NVIDIA 'gb200-bmc' machine and functional test using OpenBMC ---------------------------------------------------------------- Ed Tanous (4): hw/arm/aspeed: Add second SPI chip to Aspeed model docs: add support for gb200-bmc hw/arm/aspeed: Add GB200 BMC target tests/functional: Add gb200 tests Jamin Lin (3): hw/misc/aspeed_sdmc: Skipping dram_init in u-boot for AST2700 hw/misc/aspeed_scu: Support the Frequency Counter Control register for AST2700 aspeed: Deprecate the ast2700a0-evb machine Patrick Williams (2): hw/arm/aspeed: bletchley: update hw strap values hw/arm/aspeed: add Catalina machine type Tan Siewert (2): hw/misc/aspeed_scu: Handle AST2600 protection key registers correctly tests/qtest: Add test for ASPEED SCU docs/about/deprecated.rst | 8 + docs/system/arm/aspeed.rst | 4 +- hw/arm/aspeed_eeprom.h | 3 + include/hw/arm/aspeed.h | 2 + hw/arm/aspeed.c | 285 ++++++++++++++++++++++- hw/arm/aspeed_eeprom.c | 21 ++ hw/misc/aspeed_scu.c | 22 +- hw/misc/aspeed_sdmc.c | 3 + tests/qtest/aspeed_scu-test.c | 231 ++++++++++++++++++ hw/arm/Kconfig | 1 + tests/functional/aspeed.py | 9 +- tests/functional/meson.build | 4 + tests/functional/test_arm_aspeed_catalina.py | 25 ++ tests/functional/test_arm_aspeed_gb200nvl_bmc.py | 26 +++ tests/qtest/meson.build | 1 + 15 files changed, 636 insertions(+), 9 deletions(-) create mode 100644 tests/qtest/aspeed_scu-test.c create mode 100755 tests/functional/test_arm_aspeed_catalina.py create mode 100644 tests/functional/test_arm_aspeed_gb200nvl_bmc.py From: Jamin Lin <jamin_lin@aspeedtech.com> On AST2700 SoC, QEMU now sets BIT6 in VGA0 SCRATCH register to indicate that DDR training has completed, thus skipping the dram_init(). To align with the recent U-Boot changes, where the Main Control Register's BIT16 is checked to skip the dram_init() process, this patch sets BIT16 in the SDMC Main Control Register at reset time. This allows both the main U-Boot stage to correctly detect and bypass DRAM initialization when running under QEMU. Reference: - QEMU: https://github.com/qemu/qemu/commit/2d082fea485ee455a70ed3e963cdf9a70f34858a - U-Boot: https://github.com/AspeedTech-BMC/u-boot/commit/94e5435504fb0d8888f5c1bfd3fa284cdd6aaf9b Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Link: https://lore.kernel.org/qemu-devel/20250618080006.846355-2-jamin_lin@aspeedtech.com Signed-off-by: Cédric Le Goater <clg@redhat.com> --- hw/misc/aspeed_sdmc.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/hw/misc/aspeed_sdmc.c b/hw/misc/aspeed_sdmc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/aspeed_sdmc.c +++ b/hw/misc/aspeed_sdmc.c @@ -XXX,XX +XXX,XX @@ static void aspeed_2700_sdmc_reset(DeviceState *dev) /* Set ram size bit and defaults values */ s->regs[R_MAIN_CONF] = asc->compute_conf(s, 0); + /* Skipping dram init */ + s->regs[R_MAIN_CONTROL] = BIT(16); + if (s->unlocked) { s->regs[R_2700_PROT] = PROT_UNLOCKED; } -- 2.50.0 From: Jamin Lin <jamin_lin@aspeedtech.com> According to the datasheet: BIT[1] (SCU_FREQ_OSC_EN) enables the oscillator frequency measurement counter. BIT[6] (SCU_FREQ_DONE) indicates the measurement is finished. Firmware polls BIT[6] to determine when measurement is complete. The flag can be cleared by writing BIT[1] to 0. To simulate this hardware behavior in QEMU: If BIT[1] is set to 1, BIT[6] is immediately set to 1 to avoid firmware hanging during polling. If BIT[1] is cleared to 0, BIT[6] is also cleared to 0 to match hardware semantics. The initial value of this register is initialized to 0x80, reflecting the default value confirmed from an EVB register dump. Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Link: https://lore.kernel.org/qemu-devel/20250618080006.846355-3-jamin_lin@aspeedtech.com Signed-off-by: Cédric Le Goater <clg@redhat.com> --- hw/misc/aspeed_scu.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/hw/misc/aspeed_scu.c b/hw/misc/aspeed_scu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/aspeed_scu.c +++ b/hw/misc/aspeed_scu.c @@ -XXX,XX +XXX,XX @@ #define AST2700_SCUIO_UARTCLK_GEN TO_REG(0x330) #define AST2700_SCUIO_HUARTCLK_GEN TO_REG(0x334) #define AST2700_SCUIO_CLK_DUTY_MEAS_RST TO_REG(0x388) +#define AST2700_SCUIO_FREQ_CNT_CTL TO_REG(0x3A0) #define SCU_IO_REGION_SIZE 0x1000 @@ -XXX,XX +XXX,XX @@ static void aspeed_ast2700_scuio_write(void *opaque, hwaddr offset, s->regs[reg - 1] ^= data; updated = true; break; + case AST2700_SCUIO_FREQ_CNT_CTL: + s->regs[reg] = deposit32(s->regs[reg], 6, 1, !!(data & BIT(1))); + updated = true; + break; default: qemu_log_mask(LOG_GUEST_ERROR, "%s: Unhandled write at offset 0x%" HWADDR_PRIx "\n", @@ -XXX,XX +XXX,XX @@ static const uint32_t ast2700_a0_resets_io[ASPEED_AST2700_SCU_NR_REGS] = { [AST2700_SCUIO_UARTCLK_GEN] = 0x00014506, [AST2700_SCUIO_HUARTCLK_GEN] = 0x000145c0, [AST2700_SCUIO_CLK_DUTY_MEAS_RST] = 0x0c9100d2, + [AST2700_SCUIO_FREQ_CNT_CTL] = 0x00000080, }; static void aspeed_2700_scuio_class_init(ObjectClass *klass, const void *data) -- 2.50.0 From: Patrick Williams <patrick@stwcx.xyz> Update the Bletchley hardware strap register values per actual hardware: ``` root@bmc:~# devmem 0x1e6e2500 0x00002000 root@bmc:~# devmem 0x1e6e2510 0x00000801 ``` Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Reviewed-by: Cédric Le Goater <clg@redhat.com> Link: https://lore.kernel.org/qemu-devel/20250619035850.2682690-1-patrick@stwcx.xyz Signed-off-by: Cédric Le Goater <clg@redhat.com> --- hw/arm/aspeed.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ struct AspeedMachineState { #define FUJI_BMC_HW_STRAP2 0x00000000 /* Bletchley hardware value */ -/* TODO: Leave same as EVB for now. */ -#define BLETCHLEY_BMC_HW_STRAP1 AST2600_EVB_HW_STRAP1 -#define BLETCHLEY_BMC_HW_STRAP2 AST2600_EVB_HW_STRAP2 +#define BLETCHLEY_BMC_HW_STRAP1 0x00002000 +#define BLETCHLEY_BMC_HW_STRAP2 0x00000801 /* Qualcomm DC-SCM hardware value */ #define QCOM_DC_SCM_V1_BMC_HW_STRAP1 0x00000000 -- 2.50.0 From: Patrick Williams <patrick@stwcx.xyz> Add the 'catalina-bmc' machine type based on the kernel DTS[1] as of 6.16-rc2. The i2c model is as complete as the current QEMU models support, but in some cases I substituted devices that are close enough for present functionality. Strap registers are were verified with hardware. This has been tested with an openbmc image built from [2]. Add a functional test in line with Bletchley, pointing at an image obtained from the OpenBMC Jenkins server. [1]: https://github.com/torvalds/linux/blob/v6.16-rc2/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts [2]: https://github.com/openbmc/openbmc/commit/5bc73ec261f981d5e586bda5ac78eb0cbd5f92b0 Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Reviewed-by: Cédric Le Goater <clg@redhat.com> Link: https://lore.kernel.org/qemu-devel/20250619151458.2831859-1-patrick@stwcx.xyz Signed-off-by: Cédric Le Goater <clg@redhat.com> --- hw/arm/aspeed.c | 200 +++++++++++++++++++ hw/arm/Kconfig | 1 + tests/functional/meson.build | 2 + tests/functional/test_arm_aspeed_catalina.py | 25 +++ 4 files changed, 228 insertions(+) create mode 100755 tests/functional/test_arm_aspeed_catalina.py diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ #include "hw/i2c/i2c_mux_pca954x.h" #include "hw/i2c/smbus_eeprom.h" #include "hw/gpio/pca9552.h" +#include "hw/gpio/pca9554.h" #include "hw/nvram/eeprom_at24c.h" #include "hw/sensor/tmp105.h" #include "hw/misc/led.h" @@ -XXX,XX +XXX,XX @@ static void fuji_bmc_i2c_init(AspeedMachineState *bmc) } #define TYPE_TMP421 "tmp421" +#define TYPE_DS1338 "ds1338" + +/* Catalina hardware value */ +#define CATALINA_BMC_HW_STRAP1 0x00002002 +#define CATALINA_BMC_HW_STRAP2 0x00000800 + +#define CATALINA_BMC_RAM_SIZE ASPEED_RAM_SIZE(2 * GiB) + +static void catalina_bmc_i2c_init(AspeedMachineState *bmc) +{ + /* Reference from v6.16-rc2 aspeed-bmc-facebook-catalina.dts */ + + AspeedSoCState *soc = bmc->soc; + I2CBus *i2c[16] = {}; + I2CSlave *i2c_mux; + + /* busses 0-15 are all used. */ + for (int i = 0; i < ARRAY_SIZE(i2c); i++) { + i2c[i] = aspeed_i2c_get_bus(&soc->i2c, i); + } + + /* &i2c0 */ + /* i2c-mux@71 (PCA9546) on i2c0 */ + i2c_slave_create_simple(i2c[0], TYPE_PCA9546, 0x71); + + /* i2c-mux@72 (PCA9546) on i2c0 */ + i2c_mux = i2c_slave_create_simple(i2c[0], TYPE_PCA9546, 0x72); + + /* i2c0mux1ch1 */ + /* io_expander7 - pca9535@20 */ + i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 1), + TYPE_PCA9552, 0x20); + /* eeprom@50 */ + at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 1), 0x50, 8 * KiB); + + /* i2c-mux@73 (PCA9546) on i2c0 */ + i2c_slave_create_simple(i2c[0], TYPE_PCA9546, 0x73); + + /* i2c-mux@75 (PCA9546) on i2c0 */ + i2c_slave_create_simple(i2c[0], TYPE_PCA9546, 0x75); + + /* i2c-mux@76 (PCA9546) on i2c0 */ + i2c_mux = i2c_slave_create_simple(i2c[0], TYPE_PCA9546, 0x76); + + /* i2c0mux4ch1 */ + /* io_expander8 - pca9535@21 */ + i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 1), + TYPE_PCA9552, 0x21); + /* eeprom@50 */ + at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 1), 0x50, 8 * KiB); + + /* i2c-mux@77 (PCA9546) on i2c0 */ + i2c_slave_create_simple(i2c[0], TYPE_PCA9546, 0x77); + + + /* &i2c1 */ + /* i2c-mux@70 (PCA9548) on i2c1 */ + i2c_mux = i2c_slave_create_simple(i2c[1], TYPE_PCA9548, 0x70); + /* i2c1mux0ch0 */ + /* ina238@41 - no model */ + /* ina238@42 - no model */ + /* ina238@44 - no model */ + /* i2c1mux0ch1 */ + /* ina238@41 - no model */ + /* ina238@43 - no model */ + /* i2c1mux0ch4 */ + /* ltc4287@42 - no model */ + /* ltc4287@43 - no model */ + + /* i2c1mux0ch5 */ + /* eeprom@54 */ + at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 5), 0x54, 8 * KiB); + /* tpm75@4f */ + i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 5), TYPE_TMP75, 0x4f); + + /* i2c1mux0ch6 */ + /* io_expander5 - pca9554@27 */ + i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 6), + TYPE_PCA9554, 0x27); + /* io_expander6 - pca9555@25 */ + i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 6), + TYPE_PCA9552, 0x25); + /* eeprom@51 */ + at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 6), 0x51, 8 * KiB); + + /* i2c1mux0ch7 */ + /* eeprom@53 */ + at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 7), 0x53, 8 * KiB); + /* temperature-sensor@4b - tmp75 */ + i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 7), TYPE_TMP75, 0x4b); + + /* &i2c2 */ + /* io_expander0 - pca9555@20 */ + i2c_slave_create_simple(i2c[2], TYPE_PCA9552, 0x20); + /* io_expander0 - pca9555@21 */ + i2c_slave_create_simple(i2c[2], TYPE_PCA9552, 0x21); + /* io_expander0 - pca9555@27 */ + i2c_slave_create_simple(i2c[2], TYPE_PCA9552, 0x27); + /* eeprom@50 */ + at24c_eeprom_init(i2c[2], 0x50, 8 * KiB); + /* eeprom@51 */ + at24c_eeprom_init(i2c[2], 0x51, 8 * KiB); + + /* &i2c5 */ + /* i2c-mux@70 (PCA9548) on i2c5 */ + i2c_mux = i2c_slave_create_simple(i2c[5], TYPE_PCA9548, 0x70); + /* i2c5mux0ch6 */ + /* eeprom@52 */ + at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 6), 0x52, 8 * KiB); + /* i2c5mux0ch7 */ + /* ina230@40 - no model */ + /* ina230@41 - no model */ + /* ina230@44 - no model */ + /* ina230@45 - no model */ + + /* &i2c6 */ + /* io_expander3 - pca9555@21 */ + i2c_slave_create_simple(i2c[6], TYPE_PCA9552, 0x21); + /* rtc@6f - nct3018y */ + i2c_slave_create_simple(i2c[6], TYPE_DS1338, 0x6f); + + /* &i2c9 */ + /* io_expander4 - pca9555@4f */ + i2c_slave_create_simple(i2c[9], TYPE_PCA9552, 0x4f); + /* temperature-sensor@4b - tpm75 */ + i2c_slave_create_simple(i2c[9], TYPE_TMP75, 0x4b); + /* eeprom@50 */ + at24c_eeprom_init(i2c[9], 0x50, 8 * KiB); + /* eeprom@56 */ + at24c_eeprom_init(i2c[9], 0x56, 8 * KiB); + + /* &i2c10 */ + /* temperature-sensor@1f - tpm421 */ + i2c_slave_create_simple(i2c[10], TYPE_TMP421, 0x1f); + /* eeprom@50 */ + at24c_eeprom_init(i2c[10], 0x50, 8 * KiB); + + /* &i2c11 */ + /* ssif-bmc@10 - no model */ + + /* &i2c12 */ + /* eeprom@50 */ + at24c_eeprom_init(i2c[12], 0x50, 8 * KiB); + + /* &i2c13 */ + /* eeprom@50 */ + at24c_eeprom_init(i2c[13], 0x50, 8 * KiB); + /* eeprom@54 */ + at24c_eeprom_init(i2c[13], 0x54, 256); + /* eeprom@55 */ + at24c_eeprom_init(i2c[13], 0x55, 256); + /* eeprom@57 */ + at24c_eeprom_init(i2c[13], 0x57, 256); + + /* &i2c14 */ + /* io_expander9 - pca9555@10 */ + i2c_slave_create_simple(i2c[14], TYPE_PCA9552, 0x10); + /* io_expander10 - pca9555@11 */ + i2c_slave_create_simple(i2c[14], TYPE_PCA9552, 0x11); + /* io_expander11 - pca9555@12 */ + i2c_slave_create_simple(i2c[14], TYPE_PCA9552, 0x12); + /* io_expander12 - pca9555@13 */ + i2c_slave_create_simple(i2c[14], TYPE_PCA9552, 0x13); + /* io_expander13 - pca9555@14 */ + i2c_slave_create_simple(i2c[14], TYPE_PCA9552, 0x14); + /* io_expander14 - pca9555@15 */ + i2c_slave_create_simple(i2c[14], TYPE_PCA9552, 0x15); + + /* &i2c15 */ + /* temperature-sensor@1f - tmp421 */ + i2c_slave_create_simple(i2c[15], TYPE_TMP421, 0x1f); + /* eeprom@52 */ + at24c_eeprom_init(i2c[15], 0x52, 8 * KiB); +} static void bletchley_bmc_i2c_init(AspeedMachineState *bmc) { @@ -XXX,XX +XXX,XX @@ static void aspeed_machine_bletchley_class_init(ObjectClass *oc, aspeed_machine_class_init_cpus_defaults(mc); } +static void aspeed_machine_catalina_class_init(ObjectClass *oc, + const void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); + + mc->desc = "Facebook Catalina BMC (Cortex-A7)"; + amc->soc_name = "ast2600-a3"; + amc->hw_strap1 = CATALINA_BMC_HW_STRAP1; + amc->hw_strap2 = CATALINA_BMC_HW_STRAP2; + amc->fmc_model = "w25q01jvq"; + amc->spi_model = NULL; + amc->num_cs = 2; + amc->macs_mask = ASPEED_MAC2_ON; + amc->i2c_init = catalina_bmc_i2c_init; + mc->auto_create_sdcard = true; + mc->default_ram_size = CATALINA_BMC_RAM_SIZE; + aspeed_machine_class_init_cpus_defaults(mc); + aspeed_machine_ast2600_class_emmc_init(oc); +} + static void fby35_reset(MachineState *state, ResetType type) { AspeedMachineState *bmc = ASPEED_MACHINE(state); @@ -XXX,XX +XXX,XX @@ static const TypeInfo aspeed_machine_types[] = { .name = MACHINE_TYPE_NAME("bletchley-bmc"), .parent = TYPE_ASPEED_MACHINE, .class_init = aspeed_machine_bletchley_class_init, + }, { + .name = MACHINE_TYPE_NAME("catalina-bmc"), + .parent = TYPE_ASPEED_MACHINE, + .class_init = aspeed_machine_catalina_class_init, }, { .name = MACHINE_TYPE_NAME("fby35-bmc"), .parent = MACHINE_TYPE_NAME("ast2600-evb"), diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ASPEED_SOC select I2C select DPS310 select PCA9552 + select PCA9554 select SERIAL_MM select SMBUS_EEPROM select PCA954X diff --git a/tests/functional/meson.build b/tests/functional/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/functional/meson.build +++ b/tests/functional/meson.build @@ -XXX,XX +XXX,XX @@ test_timeouts = { 'arm_aspeed_ast2500' : 720, 'arm_aspeed_ast2600' : 1200, 'arm_aspeed_bletchley' : 480, + 'arm_aspeed_catalina' : 480, 'arm_aspeed_rainier' : 480, 'arm_bpim2u' : 500, 'arm_collie' : 180, @@ -XXX,XX +XXX,XX @@ tests_arm_system_thorough = [ 'arm_aspeed_ast2500', 'arm_aspeed_ast2600', 'arm_aspeed_bletchley', + 'arm_aspeed_catalina', 'arm_aspeed_rainier', 'arm_bpim2u', 'arm_canona1100', diff --git a/tests/functional/test_arm_aspeed_catalina.py b/tests/functional/test_arm_aspeed_catalina.py new file mode 100755 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/functional/test_arm_aspeed_catalina.py @@ -XXX,XX +XXX,XX @@ +#!/usr/bin/env python3 +# +# Functional test that boots the ASPEED machines +# +# SPDX-License-Identifier: GPL-2.0-or-later + +from qemu_test import Asset +from aspeed import AspeedTest + + +class CatalinaMachine(AspeedTest): + + ASSET_CATALINA_FLASH = Asset( + 'https://github.com/legoater/qemu-aspeed-boot/raw/a866feb5ef81245b4827a214584bf6bcc72939f6/images/catalina-bmc/obmc-phosphor-image-catalina-20250619123021.static.mtd.xz', + '287402e1ba021991e06be1d098f509444a02a3d81a73a932f66528b159e864f9') + + def test_arm_ast2600_catalina_openbmc(self): + image_path = self.uncompress(self.ASSET_CATALINA_FLASH) + + self.do_test_arm_aspeed_openbmc('catalina-bmc', image=image_path, + uboot='2019.04', cpu_id='0xf00', + soc='AST2600 rev A3') + +if __name__ == '__main__': + AspeedTest.main() -- 2.50.0 From: Tan Siewert <tan@siewert.io> The AST2600 SCU has two protection key registers (0x00 and 0x10) that both need to be unlocked. (Un-)locking 0x00 modifies both protection key registers, while modifying 0x10 only modifies itself. This commit updates the SCU write logic to reject writes unless both protection key registers are unlocked, matching the behaviour of real hardware. Signed-off-by: Tan Siewert <tan@siewert.io> Reviewed-by: Jamin Lin <jamin_lin@aspeedtech.com> Link: https://lore.kernel.org/qemu-devel/20250619085329.42125-1-tan@siewert.io Signed-off-by: Cédric Le Goater <clg@redhat.com> --- hw/misc/aspeed_scu.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/hw/misc/aspeed_scu.c b/hw/misc/aspeed_scu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/aspeed_scu.c +++ b/hw/misc/aspeed_scu.c @@ -XXX,XX +XXX,XX @@ #define BMC_DEV_ID TO_REG(0x1A4) #define AST2600_PROT_KEY TO_REG(0x00) +#define AST2600_PROT_KEY2 TO_REG(0x10) #define AST2600_SILICON_REV TO_REG(0x04) #define AST2600_SILICON_REV2 TO_REG(0x14) #define AST2600_SYS_RST_CTRL TO_REG(0x40) @@ -XXX,XX +XXX,XX @@ static void aspeed_ast2600_scu_write(void *opaque, hwaddr offset, int reg = TO_REG(offset); /* Truncate here so bitwise operations below behave as expected */ uint32_t data = data64; + bool prot_data_state = data == ASPEED_SCU_PROT_KEY; + bool unlocked = s->regs[AST2600_PROT_KEY] && s->regs[AST2600_PROT_KEY2]; if (reg >= ASPEED_AST2600_SCU_NR_REGS) { qemu_log_mask(LOG_GUEST_ERROR, @@ -XXX,XX +XXX,XX @@ static void aspeed_ast2600_scu_write(void *opaque, hwaddr offset, return; } - if (reg > PROT_KEY && !s->regs[PROT_KEY]) { + if ((reg != AST2600_PROT_KEY && reg != AST2600_PROT_KEY2) && !unlocked) { qemu_log_mask(LOG_GUEST_ERROR, "%s: SCU is locked!\n", __func__); + return; } trace_aspeed_scu_write(offset, size, data); switch (reg) { case AST2600_PROT_KEY: - s->regs[reg] = (data == ASPEED_SCU_PROT_KEY) ? 1 : 0; + /* + * Writing a value to SCU000 will modify both protection + * registers to each protection register individually. + */ + s->regs[AST2600_PROT_KEY] = prot_data_state; + s->regs[AST2600_PROT_KEY2] = prot_data_state; + return; + case AST2600_PROT_KEY2: + s->regs[AST2600_PROT_KEY2] = prot_data_state; return; case AST2600_HW_STRAP1: case AST2600_HW_STRAP2: -- 2.50.0 From: Tan Siewert <tan@siewert.io> This adds basic tests for the ASPEED System Control Unit (SCU) and its protection mechanism on the AST2500 and AST2600 platforms. The tests verify: - That SCU protection registers can be unlocked and locked again - That modifying the primary protection register on AST2600 also affects the secondary one - That writes to protected SCU registers are blocked unless protection registers are unlocked explicitly These tests ensure proper emulation of hardware locking behaviour and help catch regressions in SCU access logic. Signed-off-by: Tan Siewert <tan@siewert.io> Reviewed-by: Cédric Le Goater <clg@redhat.com> Link: https://lore.kernel.org/qemu-devel/20250630112646.74944-1-tan@siewert.io [ clg: Reordered file list in meson.build ] Signed-off-by: Cédric Le Goater <clg@redhat.com> --- tests/qtest/aspeed_scu-test.c | 231 ++++++++++++++++++++++++++++++++++ tests/qtest/meson.build | 1 + 2 files changed, 232 insertions(+) create mode 100644 tests/qtest/aspeed_scu-test.c diff --git a/tests/qtest/aspeed_scu-test.c b/tests/qtest/aspeed_scu-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/aspeed_scu-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the ASPEED AST2500 and AST2600 SCU. + * + * SPDX-License-Identifier: GPL-2.0-or-later + * Copyright (C) 2025 Tan Siewert + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +/* + * SCU base, as well as protection key are + * the same on AST2500 and 2600. + */ +#define AST_SCU_BASE 0x1E6E2000 +#define AST_SCU_PROT_LOCK_STATE 0x0 +#define AST_SCU_PROT_LOCK_VALUE 0x2 +#define AST_SCU_PROT_UNLOCK_STATE 0x1 +#define AST_SCU_PROT_UNLOCK_VALUE 0x1688A8A8 + +#define AST2500_MACHINE "-machine ast2500-evb" +#define AST2500_SCU_PROT_REG 0x00 +#define AST2500_SCU_MISC_2_CONTROL_REG 0x4C + +#define AST2600_MACHINE "-machine ast2600-evb" +/* AST2600 has two protection registers */ +#define AST2600_SCU_PROT_REG 0x000 +#define AST2600_SCU_PROT_REG2 0x010 +#define AST2600_SCU_MISC_2_CONTROL_REG 0x0C4 + +#define TEST_LOCK_ARBITRARY_VALUE 0xABCDEFAB + +/** + * Assert that a given register matches an expected value. + * + * Reads the register and checks if its value equals the expected value. + * + * @param *s - QTest machine state + * @param reg - Address of the register to be checked + * @param expected - Expected register value + */ +static inline void assert_register_eq(QTestState *s, + uint32_t reg, + uint32_t expected) +{ + uint32_t value = qtest_readl(s, reg); + g_assert_cmphex(value, ==, expected); +} + +/** + * Assert that a given register does not match a specific value. + * + * Reads the register and checks that its value is not equal to the + * provided value. + * + * @param *s - QTest machine state + * @param reg - Address of the register to be checked + * @param not_expected - Value the register must not contain + */ +static inline void assert_register_neq(QTestState *s, + uint32_t reg, + uint32_t not_expected) +{ + uint32_t value = qtest_readl(s, reg); + g_assert_cmphex(value, !=, not_expected); +} + +/** + * Test whether the SCU can be locked and unlocked correctly. + * + * When testing multiple registers, this function assumes that writing + * to the first register also affects the others. However, writing to + * any other register only affects itself. + * + * @param *machine - input machine configuration, passed directly + * to QTest + * @param regs[] - List of registers to be checked + * @param regc - amount of arguments for registers to be checked + */ +static void test_protection_register(const char *machine, + const uint32_t regs[], + const int regc) +{ + QTestState *s = qtest_init(machine); + + for (int i = 0; i < regc; i++) { + uint32_t reg = regs[i]; + + qtest_writel(s, reg, AST_SCU_PROT_UNLOCK_VALUE); + assert_register_eq(s, reg, AST_SCU_PROT_UNLOCK_STATE); + + /** + * Check that other registers are unlocked too, if more + * than one is available. + */ + if (regc > 1 && i == 0) { + /* Initialise at 1 instead of 0 to skip first */ + for (int j = 1; j < regc; j++) { + uint32_t add_reg = regs[j]; + assert_register_eq(s, add_reg, AST_SCU_PROT_UNLOCK_STATE); + } + } + + /* Lock the register again */ + qtest_writel(s, reg, AST_SCU_PROT_LOCK_VALUE); + assert_register_eq(s, reg, AST_SCU_PROT_LOCK_STATE); + + /* And the same for locked state */ + if (regc > 1 && i == 0) { + /* Initialise at 1 instead of 0 to skip first */ + for (int j = 1; j < regc; j++) { + uint32_t add_reg = regs[j]; + assert_register_eq(s, add_reg, AST_SCU_PROT_LOCK_STATE); + } + } + } + + qtest_quit(s); +} + +static void test_2500_protection_register(void) +{ + uint32_t regs[] = { AST_SCU_BASE + AST2500_SCU_PROT_REG }; + + test_protection_register(AST2500_MACHINE, + regs, + ARRAY_SIZE(regs)); +} + +static void test_2600_protection_register(void) +{ + /** + * The AST2600 has two protection registers, both + * being required to be unlocked to do any operation. + * + * Modifying SCU000 also modifies SCU010, but modifying + * SCU010 only will keep SCU000 untouched. + */ + uint32_t regs[] = { AST_SCU_BASE + AST2600_SCU_PROT_REG, + AST_SCU_BASE + AST2600_SCU_PROT_REG2 }; + + test_protection_register(AST2600_MACHINE, + regs, + ARRAY_SIZE(regs)); +} + +/** + * Test if SCU register writes are correctly allowed or blocked + * depending on the protection register state. + * + * The test first locks the protection register and verifies that + * writes to the target SCU register are rejected. It then unlocks + * the protection register and confirms that the written value is + * retained when unlocked. + * + * @param *machine - input machine configuration, passed directly + * to QTest + * @param protection_register - first SCU protection key register + * (only one for keeping it simple) + * @param test_register - Register to be used for writing arbitrary + * values + */ +static void test_write_permission_lock_state(const char *machine, + const uint32_t protection_register, + const uint32_t test_register) +{ + QTestState *s = qtest_init(machine); + + /* Arbitrary value to lock provided SCU protection register */ + qtest_writel(s, protection_register, AST_SCU_PROT_LOCK_VALUE); + + /* Ensure that the SCU is really locked */ + assert_register_eq(s, protection_register, AST_SCU_PROT_LOCK_STATE); + + /* Write a known arbitrary value to test that the write is blocked */ + qtest_writel(s, test_register, TEST_LOCK_ARBITRARY_VALUE); + + /* We do not want to have the written value to be saved */ + assert_register_neq(s, test_register, TEST_LOCK_ARBITRARY_VALUE); + + /** + * Unlock the SCU and verify that it can be written to. + * Assumes that the first SCU protection register is sufficient to + * unlock all protection registers, if multiple are present. + */ + qtest_writel(s, protection_register, AST_SCU_PROT_UNLOCK_VALUE); + assert_register_eq(s, protection_register, AST_SCU_PROT_UNLOCK_STATE); + + /* Write a known arbitrary value to test that the write works */ + qtest_writel(s, test_register, TEST_LOCK_ARBITRARY_VALUE); + + /* Ensure that the written value is retained */ + assert_register_eq(s, test_register, TEST_LOCK_ARBITRARY_VALUE); + + qtest_quit(s); +} + +static void test_2500_write_permission_lock_state(void) +{ + test_write_permission_lock_state( + AST2500_MACHINE, + AST_SCU_BASE + AST2500_SCU_PROT_REG, + AST_SCU_BASE + AST2500_SCU_MISC_2_CONTROL_REG + ); +} + +static void test_2600_write_permission_lock_state(void) +{ + test_write_permission_lock_state( + AST2600_MACHINE, + AST_SCU_BASE + AST2600_SCU_PROT_REG, + AST_SCU_BASE + AST2600_SCU_MISC_2_CONTROL_REG + ); +} + +int main(int argc, char **argv) +{ + g_test_init(&argc, &argv, NULL); + + qtest_add_func("/ast2500/scu/protection_register", + test_2500_protection_register); + qtest_add_func("/ast2600/scu/protection_register", + test_2600_protection_register); + + qtest_add_func("/ast2500/scu/write_permission_lock_state", + test_2500_write_permission_lock_state); + qtest_add_func("/ast2600/scu/write_permission_lock_state", + test_2600_write_permission_lock_state); + + return g_test_run(); +} diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_npcm8xx = \ qtests_aspeed = \ ['aspeed_gpio-test', 'aspeed_hace-test', + 'aspeed_scu-test', 'aspeed_smc-test'] qtests_aspeed64 = \ ['ast2700-gpio-test', -- 2.50.0 From: Jamin Lin <jamin_lin@aspeedtech.com> The ast2700a0-evb machine represents the first revision of the AST2700 and serves as the initial engineering sample rather than a production version. A newer revision, A1, is now supported, and the ast2700a1-evb should replace the older A0 version. Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Link: https://lore.kernel.org/qemu-devel/20250703052400.2927831-1-jamin_lin@aspeedtech.com Signed-off-by: Cédric Le Goater <clg@redhat.com> --- docs/about/deprecated.rst | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/docs/about/deprecated.rst b/docs/about/deprecated.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/about/deprecated.rst +++ b/docs/about/deprecated.rst @@ -XXX,XX +XXX,XX @@ deprecated; use the new name ``dtb-randomness`` instead. The new name better reflects the way this property affects all random data within the device tree blob, not just the ``kaslr-seed`` node. +Arm ``ast2700a0-evb`` machine (since 10.1) +'''''''''''''''''''''''''''''''''''''''''' + +The ``ast2700a0-evb`` machine represents the first revision of the AST2700 +and serves as the initial engineering sample rather than a production version. +A newer revision, A1, is now supported, and the ``ast2700a1-evb`` should +replace the older A0 version. + Mips ``mipssim`` machine (since 10.0) ''''''''''''''''''''''''''''''''''''' -- 2.50.0 From: Ed Tanous <etanous@nvidia.com> Aspeed2600 has two spi lanes; Add a new struct that can mount the second SPI. Signed-off-by: Ed Tanous <etanous@nvidia.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Link: https://lore.kernel.org/qemu-devel/20250703144249.3348879-2-etanous@nvidia.com Signed-off-by: Cédric Le Goater <clg@redhat.com> --- include/hw/arm/aspeed.h | 2 ++ hw/arm/aspeed.c | 2 ++ 2 files changed, 4 insertions(+) diff --git a/include/hw/arm/aspeed.h b/include/hw/arm/aspeed.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/aspeed.h +++ b/include/hw/arm/aspeed.h @@ -XXX,XX +XXX,XX @@ struct AspeedMachineClass { uint32_t hw_strap2; const char *fmc_model; const char *spi_model; + const char *spi2_model; uint32_t num_cs; + uint32_t num_cs2; uint32_t macs_mask; void (*i2c_init)(AspeedMachineState *bmc); uint32_t uart_default; diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ static void aspeed_machine_init(MachineState *machine) aspeed_board_init_flashes(&bmc->soc->spi[0], bmc->spi_model ? bmc->spi_model : amc->spi_model, 1, amc->num_cs); + aspeed_board_init_flashes(&bmc->soc->spi[1], + amc->spi2_model, 1, amc->num_cs2); } if (machine->kernel_filename && sc->num_cpus > 1) { -- 2.50.0 From: Ed Tanous <etanous@nvidia.com> This patch updates the docs for support of gb200-bmc. Signed-off-by: Ed Tanous <etanous@nvidia.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Link: https://lore.kernel.org/qemu-devel/20250703144249.3348879-3-etanous@nvidia.com Signed-off-by: Cédric Le Goater <clg@redhat.com> --- docs/system/arm/aspeed.rst | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/docs/system/arm/aspeed.rst b/docs/system/arm/aspeed.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/aspeed.rst +++ b/docs/system/arm/aspeed.rst @@ -XXX,XX +XXX,XX @@ -Aspeed family boards (``ast2500-evb``, ``ast2600-evb``, ``ast2700-evb``, ``bletchley-bmc``, ``fuji-bmc``, ``fby35-bmc``, ``fp5280g2-bmc``, ``g220a-bmc``, ``palmetto-bmc``, ``qcom-dc-scm-v1-bmc``, ``qcom-firework-bmc``, ``quanta-q71l-bmc``, ``rainier-bmc``, ``romulus-bmc``, ``sonorapass-bmc``, ``supermicrox11-bmc``, ``supermicrox11spi-bmc``, ``tiogapass-bmc``, ``witherspoon-bmc``, ``yosemitev2-bmc``) -================================================================================================================================================================================================================================================================================================================================================================================================================================= +Aspeed family boards (``ast2500-evb``, ``ast2600-evb``, ``ast2700-evb``, ``bletchley-bmc``, ``fuji-bmc``, ``gb200nvl-bmc``, ``fby35-bmc``, ``fp5280g2-bmc``, ``g220a-bmc``, ``palmetto-bmc``, ``qcom-dc-scm-v1-bmc``, ``qcom-firework-bmc``, ``quanta-q71l-bmc``, ``rainier-bmc``, ``romulus-bmc``, ``sonorapass-bmc``, ``supermicrox11-bmc``, ``supermicrox11spi-bmc``, ``tiogapass-bmc``, ``witherspoon-bmc``, ``yosemitev2-bmc``) The QEMU Aspeed machines model BMCs of various OpenPOWER systems and Aspeed evaluation boards. They are based on different releases of the @@ -XXX,XX +XXX,XX @@ AST2600 SoC based machines : - ``fuji-bmc`` Facebook Fuji BMC - ``bletchley-bmc`` Facebook Bletchley BMC - ``fby35-bmc`` Facebook fby35 BMC +- ``gb200nvl-bmc`` Nvidia GB200nvl BMC - ``qcom-dc-scm-v1-bmc`` Qualcomm DC-SCM V1 BMC - ``qcom-firework-bmc`` Qualcomm Firework BMC -- 2.50.0 From: Ed Tanous <etanous@nvidia.com> GB200nvl72 is a system for for accelerated compute. This is a model for the BMC target within the system. This is based on the device tree aspeed-bmc-nvidia-gb200nvl-bmc.dts from: [1] https://github.com/openbmc/linux/blob/dev-6.6/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts Signed-off-by: Ed Tanous <etanous@nvidia.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Link: https://lore.kernel.org/qemu-devel/20250703144249.3348879-4-etanous@nvidia.com Signed-off-by: Cédric Le Goater <clg@redhat.com> --- hw/arm/aspeed_eeprom.h | 3 ++ hw/arm/aspeed.c | 78 ++++++++++++++++++++++++++++++++++++++++++ hw/arm/aspeed_eeprom.c | 21 ++++++++++++ 3 files changed, 102 insertions(+) diff --git a/hw/arm/aspeed_eeprom.h b/hw/arm/aspeed_eeprom.h index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_eeprom.h +++ b/hw/arm/aspeed_eeprom.h @@ -XXX,XX +XXX,XX @@ extern const size_t rainier_bb_fruid_len; extern const uint8_t rainier_bmc_fruid[]; extern const size_t rainier_bmc_fruid_len; +extern const uint8_t gb200nvl_bmc_fruid[]; +extern const size_t gb200nvl_bmc_fruid_len; + #endif diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ struct AspeedMachineState { #define BLETCHLEY_BMC_HW_STRAP1 0x00002000 #define BLETCHLEY_BMC_HW_STRAP2 0x00000801 +/* GB200NVL hardware value */ +#define GB200NVL_BMC_HW_STRAP1 AST2600_EVB_HW_STRAP1 +#define GB200NVL_BMC_HW_STRAP2 AST2600_EVB_HW_STRAP2 + /* Qualcomm DC-SCM hardware value */ #define QCOM_DC_SCM_V1_BMC_HW_STRAP1 0x00000000 #define QCOM_DC_SCM_V1_BMC_HW_STRAP2 0x00000041 @@ -XXX,XX +XXX,XX @@ static void create_pca9552(AspeedSoCState *soc, int bus_id, int addr) TYPE_PCA9552, addr); } +static I2CSlave *create_pca9554(AspeedSoCState *soc, int bus_id, int addr) +{ + return i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, bus_id), + TYPE_PCA9554, addr); +} + static void sonorapass_bmc_i2c_init(AspeedMachineState *bmc) { AspeedSoCState *soc = bmc->soc; @@ -XXX,XX +XXX,XX @@ static void bletchley_bmc_i2c_init(AspeedMachineState *bmc) i2c_slave_create_simple(i2c[12], TYPE_PCA9552, 0x67); } + +static void gb200nvl_bmc_i2c_init(AspeedMachineState *bmc) +{ + AspeedSoCState *soc = bmc->soc; + I2CBus *i2c[15] = {}; + DeviceState *dev; + for (int i = 0; i < sizeof(i2c) / sizeof(i2c[0]); i++) { + if ((i == 11) || (i == 12) || (i == 13)) { + continue; + } + i2c[i] = aspeed_i2c_get_bus(&soc->i2c, i); + } + + /* Bus 5 Expander */ + create_pca9554(soc, 4, 0x21); + + /* Mux I2c Expanders */ + i2c_slave_create_simple(i2c[5], "pca9546", 0x71); + i2c_slave_create_simple(i2c[5], "pca9546", 0x72); + i2c_slave_create_simple(i2c[5], "pca9546", 0x73); + i2c_slave_create_simple(i2c[5], "pca9546", 0x75); + i2c_slave_create_simple(i2c[5], "pca9546", 0x76); + i2c_slave_create_simple(i2c[5], "pca9546", 0x77); + + /* Bus 10 */ + dev = DEVICE(create_pca9554(soc, 9, 0x20)); + + /* Set FPGA_READY */ + object_property_set_str(OBJECT(dev), "pin1", "high", &error_fatal); + + create_pca9554(soc, 9, 0x21); + at24c_eeprom_init(i2c[9], 0x50, 64 * KiB); + at24c_eeprom_init(i2c[9], 0x51, 64 * KiB); + + /* Bus 11 */ + at24c_eeprom_init_rom(i2c[10], 0x50, 256, gb200nvl_bmc_fruid, + gb200nvl_bmc_fruid_len); +} + static void fby35_i2c_init(AspeedMachineState *bmc) { AspeedSoCState *soc = bmc->soc; @@ -XXX,XX +XXX,XX @@ static void aspeed_machine_catalina_class_init(ObjectClass *oc, aspeed_machine_ast2600_class_emmc_init(oc); } +#define GB200NVL_BMC_RAM_SIZE ASPEED_RAM_SIZE(1 * GiB) + +static void aspeed_machine_gb200nvl_class_init(ObjectClass *oc, + const void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); + + mc->desc = "Nvidia GB200NVL BMC (Cortex-A7)"; + amc->soc_name = "ast2600-a3"; + amc->hw_strap1 = GB200NVL_BMC_HW_STRAP1; + amc->hw_strap2 = GB200NVL_BMC_HW_STRAP2; + amc->fmc_model = "mx66u51235f"; + amc->spi_model = "mx66u51235f"; + amc->num_cs = 2; + + amc->spi2_model = "mx66u51235f"; + amc->num_cs2 = 1; + amc->macs_mask = ASPEED_MAC0_ON | ASPEED_MAC1_ON; + amc->i2c_init = gb200nvl_bmc_i2c_init; + mc->default_ram_size = GB200NVL_BMC_RAM_SIZE; + aspeed_machine_class_init_cpus_defaults(mc); + aspeed_machine_ast2600_class_emmc_init(oc); +} + static void fby35_reset(MachineState *state, ResetType type) { AspeedMachineState *bmc = ASPEED_MACHINE(state); @@ -XXX,XX +XXX,XX @@ static const TypeInfo aspeed_machine_types[] = { .name = MACHINE_TYPE_NAME("bletchley-bmc"), .parent = TYPE_ASPEED_MACHINE, .class_init = aspeed_machine_bletchley_class_init, + }, { + .name = MACHINE_TYPE_NAME("gb200nvl-bmc"), + .parent = TYPE_ASPEED_MACHINE, + .class_init = aspeed_machine_gb200nvl_class_init, }, { .name = MACHINE_TYPE_NAME("catalina-bmc"), .parent = TYPE_ASPEED_MACHINE, diff --git a/hw/arm/aspeed_eeprom.c b/hw/arm/aspeed_eeprom.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_eeprom.c +++ b/hw/arm/aspeed_eeprom.c @@ -XXX,XX +XXX,XX @@ const uint8_t rainier_bmc_fruid[] = { 0x31, 0x50, 0x46, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, }; +const uint8_t gb200nvl_bmc_fruid[] = { + 0x01, 0x00, 0x00, 0x01, 0x0b, 0x00, 0x00, 0xf3, 0x01, 0x0a, 0x19, 0x1f, + 0x0f, 0xe6, 0xc6, 0x4e, 0x56, 0x49, 0x44, 0x49, 0x41, 0xc5, 0x50, 0x33, + 0x38, 0x30, 0x39, 0xcd, 0x31, 0x35, 0x38, 0x33, 0x33, 0x32, 0x34, 0x38, + 0x30, 0x30, 0x31, 0x35, 0x30, 0xd2, 0x36, 0x39, 0x39, 0x2d, 0x31, 0x33, + 0x38, 0x30, 0x39, 0x2d, 0x30, 0x34, 0x30, 0x34, 0x2d, 0x36, 0x30, 0x30, + 0xc0, 0x01, 0x01, 0xd6, 0x4d, 0x41, 0x43, 0x3a, 0x20, 0x33, 0x43, 0x3a, + 0x36, 0x44, 0x3a, 0x36, 0x36, 0x3a, 0x31, 0x34, 0x3a, 0x43, 0x38, 0x3a, + 0x37, 0x41, 0xc1, 0x3b, 0x01, 0x09, 0x19, 0xc6, 0x4e, 0x56, 0x49, 0x44, + 0x49, 0x41, 0xc9, 0x50, 0x33, 0x38, 0x30, 0x39, 0x2d, 0x42, 0x4d, 0x43, + 0xd2, 0x36, 0x39, 0x39, 0x2d, 0x31, 0x33, 0x38, 0x30, 0x39, 0x2d, 0x30, + 0x34, 0x30, 0x34, 0x2d, 0x36, 0x30, 0x30, 0xc4, 0x41, 0x45, 0x2e, 0x31, + 0xcd, 0x31, 0x35, 0x38, 0x33, 0x33, 0x32, 0x34, 0x38, 0x30, 0x30, 0x31, + 0x35, 0x30, 0xc0, 0xc4, 0x76, 0x30, 0x2e, 0x31, 0xc1, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0xb4, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff + +}; + const size_t tiogapass_bmc_fruid_len = sizeof(tiogapass_bmc_fruid); const size_t fby35_nic_fruid_len = sizeof(fby35_nic_fruid); const size_t fby35_bb_fruid_len = sizeof(fby35_bb_fruid); @@ -XXX,XX +XXX,XX @@ const size_t fby35_bmc_fruid_len = sizeof(fby35_bmc_fruid); const size_t yosemitev2_bmc_fruid_len = sizeof(yosemitev2_bmc_fruid); const size_t rainier_bb_fruid_len = sizeof(rainier_bb_fruid); const size_t rainier_bmc_fruid_len = sizeof(rainier_bmc_fruid); +const size_t gb200nvl_bmc_fruid_len = sizeof(gb200nvl_bmc_fruid); + -- 2.50.0 From: Ed Tanous <etanous@nvidia.com> To support the newly added gb200 machine, add appropriate tests and extend do_test_arm_aspeed_openbmc() to support the hostname of this new system: "gb200nvl-obmc". Signed-off-by: Ed Tanous <etanous@nvidia.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Link: https://lore.kernel.org/qemu-devel/20250703144249.3348879-5-etanous@nvidia.com [ clg: Adjust commit log to document do_test_arm_aspeed_openbmc() change ] Signed-off-by: Cédric Le Goater <clg@redhat.com> --- tests/functional/aspeed.py | 9 +++++-- tests/functional/meson.build | 2 ++ .../test_arm_aspeed_gb200nvl_bmc.py | 26 +++++++++++++++++++ 3 files changed, 35 insertions(+), 2 deletions(-) create mode 100644 tests/functional/test_arm_aspeed_gb200nvl_bmc.py diff --git a/tests/functional/aspeed.py b/tests/functional/aspeed.py index XXXXXXX..XXXXXXX 100644 --- a/tests/functional/aspeed.py +++ b/tests/functional/aspeed.py @@ -XXX,XX +XXX,XX @@ class AspeedTest(LinuxKernelTest): def do_test_arm_aspeed_openbmc(self, machine, image, uboot='2019.04', - cpu_id='0x0', soc='AST2500 rev A1'): - hostname = machine.removesuffix('-bmc') + cpu_id='0x0', soc='AST2500 rev A1', + image_hostname=None): + # Allow for the image hostname to not end in "-bmc" + if image_hostname is not None: + hostname = image_hostname + else: + hostname = machine.removesuffix('-bmc') self.set_machine(machine) self.vm.set_console() diff --git a/tests/functional/meson.build b/tests/functional/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/functional/meson.build +++ b/tests/functional/meson.build @@ -XXX,XX +XXX,XX @@ test_timeouts = { 'arm_aspeed_ast2600' : 1200, 'arm_aspeed_bletchley' : 480, 'arm_aspeed_catalina' : 480, + 'arm_aspeed_gb200nvl_bmc' : 480, 'arm_aspeed_rainier' : 480, 'arm_bpim2u' : 500, 'arm_collie' : 180, @@ -XXX,XX +XXX,XX @@ tests_arm_system_thorough = [ 'arm_aspeed_ast2600', 'arm_aspeed_bletchley', 'arm_aspeed_catalina', + 'arm_aspeed_gb200nvl_bmc', 'arm_aspeed_rainier', 'arm_bpim2u', 'arm_canona1100', diff --git a/tests/functional/test_arm_aspeed_gb200nvl_bmc.py b/tests/functional/test_arm_aspeed_gb200nvl_bmc.py new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/functional/test_arm_aspeed_gb200nvl_bmc.py @@ -XXX,XX +XXX,XX @@ +#!/usr/bin/env python3 +# +# Functional test that boots the ASPEED machines +# +# SPDX-License-Identifier: GPL-2.0-or-later + +from qemu_test import Asset +from aspeed import AspeedTest + + +class GB200Machine(AspeedTest): + + ASSET_GB200_FLASH = Asset( + 'https://github.com/legoater/qemu-aspeed-boot/raw/refs/heads/master/images/gb200nvl-obmc/obmc-phosphor-image-gb200nvl-obmc-20250702182348.static.mtd.xz', + 'b84819317cb3dc762895ad507705978ef000bfc77c50c33a63bdd37921db0dbc') + + def test_arm_aspeed_gb200_openbmc(self): + image_path = self.uncompress(self.ASSET_GB200_FLASH) + + self.do_test_arm_aspeed_openbmc('gb200nvl-bmc', image=image_path, + uboot='2019.04', cpu_id='0xf00', + soc='AST2600 rev A3', + image_hostname='gb200nvl-obmc') + +if __name__ == '__main__': + AspeedTest.main() -- 2.50.0