The following changes since commit 003ba52a8b327180e284630b289c6ece5a3e08b9: Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging (2023-02-16 11:16:39 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20230216 for you to fetch changes up to caf01d6a435d9f4a95aeae2f9fc6cb8b889b1fb8: tests/qtest: Restrict tpm-tis-devices-{swtpm}-test to CONFIG_TCG (2023-02-16 16:28:53 +0000) ---------------------------------------------------------------- target-arm queue: * Some mostly M-profile-related code cleanups * avocado: Retire the boot_linux.py AArch64 TCG tests * hw/arm/smmuv3: Add GBPA register * arm/virt: don't try to spell out the accelerator * hw/arm: Attach PSPI module to NPCM7XX SoC * Some cleanup/refactoring patches aiming towards allowing building Arm targets without CONFIG_TCG ---------------------------------------------------------------- Alex Bennée (1): tests/avocado: retire the Aarch64 TCG tests from boot_linux.py Claudio Fontana (3): target/arm: rename handle_semihosting to tcg_handle_semihosting target/arm: wrap psci call with tcg_enabled target/arm: wrap call to aarch64_sve_change_el in tcg_enabled() Cornelia Huck (1): arm/virt: don't try to spell out the accelerator Fabiano Rosas (7): target/arm: Move PC alignment check target/arm: Move cpregs code out of cpu.h tests/avocado: Skip tests that require a missing accelerator tests/avocado: Tag TCG tests with accel:tcg target/arm: Use "max" as default cpu for the virt machine with KVM tests/qtest: arm-cpu-features: Match tests to required accelerators tests/qtest: Restrict tpm-tis-devices-{swtpm}-test to CONFIG_TCG Hao Wu (3): MAINTAINERS: Add myself to maintainers and remove Havard hw/ssi: Add Nuvoton PSPI Module hw/arm: Attach PSPI module to NPCM7XX SoC Jean-Philippe Brucker (2): hw/arm/smmu-common: Support 64-bit addresses hw/arm/smmu-common: Fix TTB1 handling Mostafa Saleh (1): hw/arm/smmuv3: Add GBPA register Philippe Mathieu-Daudé (12): hw/intc/armv7m_nvic: Use OBJECT_DECLARE_SIMPLE_TYPE() macro target/arm: Simplify arm_v7m_mmu_idx_for_secstate() for user emulation target/arm: Reduce arm_v7m_mmu_idx_[all/for_secstate_and_priv]() scope target/arm: Constify ID_PFR1 on user emulation target/arm: Convert CPUARMState::eabi to boolean target/arm: Avoid resetting CPUARMState::eabi field target/arm: Restrict CPUARMState::gicv3state to sysemu target/arm: Restrict CPUARMState::arm_boot_info to sysemu target/arm: Restrict CPUARMState::nvic to sysemu target/arm: Store CPUARMState::nvic as NVICState* target/arm: Declare CPU <-> NVIC helpers in 'hw/intc/armv7m_nvic.h' hw/arm: Add missing XLNX_ZYNQMP_ARM -> USB_DWC3 Kconfig dependency MAINTAINERS | 8 +- docs/system/arm/nuvoton.rst | 2 +- hw/arm/smmuv3-internal.h | 7 + include/hw/arm/npcm7xx.h | 2 + include/hw/arm/smmu-common.h | 2 - include/hw/arm/smmuv3.h | 1 + include/hw/intc/armv7m_nvic.h | 128 +++++++++++++++++- include/hw/ssi/npcm_pspi.h | 53 ++++++++ linux-user/user-internals.h | 2 +- target/arm/cpregs.h | 98 ++++++++++++++ target/arm/cpu.h | 228 ++------------------------------- target/arm/internals.h | 14 -- hw/arm/npcm7xx.c | 25 +++- hw/arm/smmu-common.c | 4 +- hw/arm/smmuv3.c | 43 ++++++- hw/arm/virt.c | 10 +- hw/intc/armv7m_nvic.c | 38 ++---- hw/ssi/npcm_pspi.c | 221 ++++++++++++++++++++++++++++++++ linux-user/arm/cpu_loop.c | 4 +- target/arm/cpu.c | 5 +- target/arm/cpu_tcg.c | 3 + target/arm/helper.c | 31 +++-- target/arm/m_helper.c | 86 +++++++------ target/arm/machine.c | 18 +-- tests/qtest/arm-cpu-features.c | 28 ++-- hw/arm/Kconfig | 1 + hw/ssi/meson.build | 2 +- hw/ssi/trace-events | 5 + tests/avocado/avocado_qemu/__init__.py | 4 + tests/avocado/boot_linux.py | 48 ++----- tests/avocado/boot_linux_console.py | 1 + tests/avocado/machine_aarch64_virt.py | 63 ++++++++- tests/avocado/reverse_debugging.py | 8 ++ tests/qtest/meson.build | 4 +- 34 files changed, 798 insertions(+), 399 deletions(-) create mode 100644 include/hw/ssi/npcm_pspi.h create mode 100644 hw/ssi/npcm_pspi.c From: Philippe Mathieu-Daudé <philmd@linaro.org> Manually convert to OBJECT_DECLARE_SIMPLE_TYPE() macro, similarly to automatic conversion from commit 8063396bf3 ("Use OBJECT_DECLARE_SIMPLE_TYPE when possible"). Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230206223502.25122-2-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/intc/armv7m_nvic.h | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/include/hw/intc/armv7m_nvic.h b/include/hw/intc/armv7m_nvic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/armv7m_nvic.h +++ b/include/hw/intc/armv7m_nvic.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" #define TYPE_NVIC "armv7m_nvic" - -typedef struct NVICState NVICState; -DECLARE_INSTANCE_CHECKER(NVICState, NVIC, - TYPE_NVIC) +OBJECT_DECLARE_SIMPLE_TYPE(NVICState, NVIC) /* Highest permitted number of exceptions (architectural limit) */ #define NVIC_MAX_VECTORS 512 -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230206223502.25122-3-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/m_helper.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) return 0; } -#else +ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) +{ + return ARMMMUIdx_MUser; +} + +#else /* !CONFIG_USER_ONLY */ /* * What kind of stack write are we doing? This affects how exceptions @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) return tt_resp; } -#endif /* !CONFIG_USER_ONLY */ - ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, bool secstate, bool priv, bool negpri) { @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) return arm_v7m_mmu_idx_for_secstate_and_priv(env, secstate, priv); } + +#endif /* !CONFIG_USER_ONLY */ -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> arm_v7m_mmu_idx_all() and arm_v7m_mmu_idx_for_secstate_and_priv() are only used for system emulation in m_helper.c. Move the definitions to avoid prototype forward declarations. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230206223502.25122-4-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 14 -------- target/arm/m_helper.c | 74 +++++++++++++++++++++--------------------- 2 files changed, 37 insertions(+), 51 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ static inline ARMMMUIdx core_to_aa64_mmu_idx(int mmu_idx) int arm_mmu_idx_to_el(ARMMMUIdx mmu_idx); -/* - * Return the MMU index for a v7M CPU with all relevant information - * manually specified. - */ -ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, - bool secstate, bool priv, bool negpri); - -/* - * Return the MMU index for a v7M CPU in the specified security and - * privilege state. - */ -ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, - bool secstate, bool priv); - /* Return the MMU index for a v7M CPU in the specified security state */ ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate); diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) #else /* !CONFIG_USER_ONLY */ +static ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, + bool secstate, bool priv, bool negpri) +{ + ARMMMUIdx mmu_idx = ARM_MMU_IDX_M; + + if (priv) { + mmu_idx |= ARM_MMU_IDX_M_PRIV; + } + + if (negpri) { + mmu_idx |= ARM_MMU_IDX_M_NEGPRI; + } + + if (secstate) { + mmu_idx |= ARM_MMU_IDX_M_S; + } + + return mmu_idx; +} + +static ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, + bool secstate, bool priv) +{ + bool negpri = armv7m_nvic_neg_prio_requested(env->nvic, secstate); + + return arm_v7m_mmu_idx_all(env, secstate, priv, negpri); +} + +/* Return the MMU index for a v7M CPU in the specified security state */ +ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) +{ + bool priv = arm_v7m_is_handler_mode(env) || + !(env->v7m.control[secstate] & 1); + + return arm_v7m_mmu_idx_for_secstate_and_priv(env, secstate, priv); +} + /* * What kind of stack write are we doing? This affects how exceptions * generated during the stacking are treated. @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) return tt_resp; } -ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, - bool secstate, bool priv, bool negpri) -{ - ARMMMUIdx mmu_idx = ARM_MMU_IDX_M; - - if (priv) { - mmu_idx |= ARM_MMU_IDX_M_PRIV; - } - - if (negpri) { - mmu_idx |= ARM_MMU_IDX_M_NEGPRI; - } - - if (secstate) { - mmu_idx |= ARM_MMU_IDX_M_S; - } - - return mmu_idx; -} - -ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, - bool secstate, bool priv) -{ - bool negpri = armv7m_nvic_neg_prio_requested(env->nvic, secstate); - - return arm_v7m_mmu_idx_all(env, secstate, priv, negpri); -} - -/* Return the MMU index for a v7M CPU in the specified security state */ -ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) -{ - bool priv = arm_v7m_is_handler_mode(env) || - !(env->v7m.control[secstate] & 1); - - return arm_v7m_mmu_idx_for_secstate_and_priv(env, secstate, priv); -} - #endif /* !CONFIG_USER_ONLY */ -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230206223502.25122-5-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void define_pmu_regs(ARMCPU *cpu) } } +#ifndef CONFIG_USER_ONLY /* * We don't know until after realize whether there's a GICv3 * attached, and that is what registers the gicv3 sysregs. @@ -XXX,XX +XXX,XX @@ static uint64_t id_pfr1_read(CPUARMState *env, const ARMCPRegInfo *ri) return pfr1; } -#ifndef CONFIG_USER_ONLY static uint64_t id_aa64pfr0_read(CPUARMState *env, const ARMCPRegInfo *ri) { ARMCPU *cpu = env_archcpu(env); @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 1, .access = PL1_R, .type = ARM_CP_NO_RAW, .accessfn = access_aa32_tid3, +#ifdef CONFIG_USER_ONLY + .type = ARM_CP_CONST, + .resetvalue = cpu->isar.id_pfr1, +#else + .type = ARM_CP_NO_RAW, + .accessfn = access_aa32_tid3, .readfn = id_pfr1_read, - .writefn = arm_cp_write_ignore }, + .writefn = arm_cp_write_ignore +#endif + }, { .name = "ID_DFR0", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 2, .access = PL1_R, .type = ARM_CP_CONST, -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230206223502.25122-6-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/user-internals.h | 2 +- target/arm/cpu.h | 2 +- linux-user/arm/cpu_loop.c | 4 ++-- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/linux-user/user-internals.h b/linux-user/user-internals.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/user-internals.h +++ b/linux-user/user-internals.h @@ -XXX,XX +XXX,XX @@ void print_termios(void *arg); #ifdef TARGET_ARM static inline int regpairs_aligned(CPUArchState *cpu_env, int num) { - return cpu_env->eabi == 1; + return cpu_env->eabi; } #elif defined(TARGET_MIPS) && defined(TARGET_ABI_MIPSO32) static inline int regpairs_aligned(CPUArchState *cpu_env, int num) { return 1; } diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { #if defined(CONFIG_USER_ONLY) /* For usermode syscall translation. */ - int eabi; + bool eabi; #endif struct CPUBreakpoint *cpu_breakpoint[16]; diff --git a/linux-user/arm/cpu_loop.c b/linux-user/arm/cpu_loop.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/arm/cpu_loop.c +++ b/linux-user/arm/cpu_loop.c @@ -XXX,XX +XXX,XX @@ void cpu_loop(CPUARMState *env) break; case EXCP_SWI: { - env->eabi = 1; + env->eabi = true; /* system call */ if (env->thumb) { /* Thumb is always EABI style with syscall number in r7 */ @@ -XXX,XX +XXX,XX @@ void cpu_loop(CPUARMState *env) * > 0xfffff and are handled below as out-of-range. */ n ^= ARM_SYSCALL_BASE; - env->eabi = 0; + env->eabi = false; } } -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Although the 'eabi' field is only used in user emulation where CPU reset doesn't occur, it doesn't belong to the area to reset. Move it after the 'end_reset_fields' for consistency. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230206223502.25122-7-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { ARMVectorReg zarray[ARM_MAX_VQ * 16]; #endif -#if defined(CONFIG_USER_ONLY) - /* For usermode syscall translation. */ - bool eabi; -#endif - struct CPUBreakpoint *cpu_breakpoint[16]; struct CPUWatchpoint *cpu_watchpoint[16]; @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { const struct arm_boot_info *boot_info; /* Store GICv3CPUState to access from this struct */ void *gicv3state; +#if defined(CONFIG_USER_ONLY) + /* For usermode syscall translation. */ + bool eabi; +#endif /* CONFIG_USER_ONLY */ #ifdef TARGET_TAGGED_ADDRESSES /* Linux syscall tagged address support */ -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230206223502.25122-8-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { void *nvic; const struct arm_boot_info *boot_info; +#if !defined(CONFIG_USER_ONLY) /* Store GICv3CPUState to access from this struct */ void *gicv3state; -#if defined(CONFIG_USER_ONLY) +#else /* CONFIG_USER_ONLY */ /* For usermode syscall translation. */ bool eabi; #endif /* CONFIG_USER_ONLY */ -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230206223502.25122-9-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { } sau; void *nvic; - const struct arm_boot_info *boot_info; #if !defined(CONFIG_USER_ONLY) + const struct arm_boot_info *boot_info; /* Store GICv3CPUState to access from this struct */ void *gicv3state; #else /* CONFIG_USER_ONLY */ -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230206223502.25122-10-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { uint32_t ctrl; } sau; - void *nvic; #if !defined(CONFIG_USER_ONLY) + void *nvic; const struct arm_boot_info *boot_info; /* Store GICv3CPUState to access from this struct */ void *gicv3state; -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> There is no point in using a void pointer to access the NVIC. Use the real type to avoid casting it while debugging. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230206223502.25122-11-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 46 ++++++++++++++++++++++--------------------- hw/intc/armv7m_nvic.c | 38 ++++++++++++----------------------- target/arm/cpu.c | 1 + target/arm/m_helper.c | 2 +- 4 files changed, 39 insertions(+), 48 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMTBFlags { typedef struct ARMMMUFaultInfo ARMMMUFaultInfo; +typedef struct NVICState NVICState; + typedef struct CPUArchState { /* Regs for current mode. */ uint32_t regs[16]; @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { } sau; #if !defined(CONFIG_USER_ONLY) - void *nvic; + NVICState *nvic; const struct arm_boot_info *boot_info; /* Store GICv3CPUState to access from this struct */ void *gicv3state; @@ -XXX,XX +XXX,XX @@ uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, /* Interface between CPU and Interrupt controller. */ #ifndef CONFIG_USER_ONLY -bool armv7m_nvic_can_take_pending_exception(void *opaque); +bool armv7m_nvic_can_take_pending_exception(NVICState *s); #else -static inline bool armv7m_nvic_can_take_pending_exception(void *opaque) +static inline bool armv7m_nvic_can_take_pending_exception(NVICState *s) { return true; } #endif /** * armv7m_nvic_set_pending: mark the specified exception as pending - * @opaque: the NVIC + * @s: the NVIC * @irq: the exception number to mark pending * @secure: false for non-banked exceptions or for the nonsecure * version of a banked exception, true for the secure version of a banked @@ -XXX,XX +XXX,XX @@ static inline bool armv7m_nvic_can_take_pending_exception(void *opaque) * if @secure is true and @irq does not specify one of the fixed set * of architecturally banked exceptions. */ -void armv7m_nvic_set_pending(void *opaque, int irq, bool secure); +void armv7m_nvic_set_pending(NVICState *s, int irq, bool secure); /** * armv7m_nvic_set_pending_derived: mark this derived exception as pending - * @opaque: the NVIC + * @s: the NVIC * @irq: the exception number to mark pending * @secure: false for non-banked exceptions or for the nonsecure * version of a banked exception, true for the secure version of a banked @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending(void *opaque, int irq, bool secure); * exceptions (exceptions generated in the course of trying to take * a different exception). */ -void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure); +void armv7m_nvic_set_pending_derived(NVICState *s, int irq, bool secure); /** * armv7m_nvic_set_pending_lazyfp: mark this lazy FP exception as pending - * @opaque: the NVIC + * @s: the NVIC * @irq: the exception number to mark pending * @secure: false for non-banked exceptions or for the nonsecure * version of a banked exception, true for the secure version of a banked @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure); * Similar to armv7m_nvic_set_pending(), but specifically for exceptions * generated in the course of lazy stacking of FP registers. */ -void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure); +void armv7m_nvic_set_pending_lazyfp(NVICState *s, int irq, bool secure); /** * armv7m_nvic_get_pending_irq_info: return highest priority pending * exception, and whether it targets Secure state - * @opaque: the NVIC + * @s: the NVIC * @pirq: set to pending exception number * @ptargets_secure: set to whether pending exception targets Secure * @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure); * to true if the current highest priority pending exception should * be taken to Secure state, false for NS. */ -void armv7m_nvic_get_pending_irq_info(void *opaque, int *pirq, +void armv7m_nvic_get_pending_irq_info(NVICState *s, int *pirq, bool *ptargets_secure); /** * armv7m_nvic_acknowledge_irq: make highest priority pending exception active - * @opaque: the NVIC + * @s: the NVIC * * Move the current highest priority pending exception from the pending * state to the active state, and update v7m.exception to indicate that * it is the exception currently being handled. */ -void armv7m_nvic_acknowledge_irq(void *opaque); +void armv7m_nvic_acknowledge_irq(NVICState *s); /** * armv7m_nvic_complete_irq: complete specified interrupt or exception - * @opaque: the NVIC + * @s: the NVIC * @irq: the exception number to complete * @secure: true if this exception was secure * @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_acknowledge_irq(void *opaque); * 0 if there is still an irq active after this one was completed * (Ignoring -1, this is the same as the RETTOBASE value before completion.) */ -int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure); +int armv7m_nvic_complete_irq(NVICState *s, int irq, bool secure); /** * armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) - * @opaque: the NVIC + * @s: the NVIC * @irq: the exception number to mark pending * @secure: false for non-banked exceptions or for the nonsecure * version of a banked exception, true for the secure version of a banked @@ -XXX,XX +XXX,XX @@ int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure); * interrupt the current execution priority. This controls whether the * RDY bit for it in the FPCCR is set. */ -bool armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure); +bool armv7m_nvic_get_ready_status(NVICState *s, int irq, bool secure); /** * armv7m_nvic_raw_execution_priority: return the raw execution priority - * @opaque: the NVIC + * @s: the NVIC * * Returns: the raw execution priority as defined by the v8M architecture. * This is the execution priority minus the effects of AIRCR.PRIS, * and minus any PRIMASK/FAULTMASK/BASEPRI priority boosting. * (v8M ARM ARM I_PKLD.) */ -int armv7m_nvic_raw_execution_priority(void *opaque); +int armv7m_nvic_raw_execution_priority(NVICState *s); /** * armv7m_nvic_neg_prio_requested: return true if the requested execution * priority is negative for the specified security state. - * @opaque: the NVIC + * @s: the NVIC * @secure: the security state to test * This corresponds to the pseudocode IsReqExecPriNeg(). */ #ifndef CONFIG_USER_ONLY -bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure); +bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure); #else -static inline bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure) +static inline bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure) { return false; } diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static inline int nvic_exec_prio(NVICState *s) return MIN(running, s->exception_prio); } -bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure) +bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure) { /* Return true if the requested execution priority is negative * for the specified security state, ie that security state @@ -XXX,XX +XXX,XX @@ bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure) * mean we don't allow FAULTMASK_NS to actually make the execution * priority negative). Compare pseudocode IsReqExcPriNeg(). */ - NVICState *s = opaque; - if (s->cpu->env.v7m.faultmask[secure]) { return true; } @@ -XXX,XX +XXX,XX @@ bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure) return false; } -bool armv7m_nvic_can_take_pending_exception(void *opaque) +bool armv7m_nvic_can_take_pending_exception(NVICState *s) { - NVICState *s = opaque; - return nvic_exec_prio(s) > nvic_pending_prio(s); } -int armv7m_nvic_raw_execution_priority(void *opaque) +int armv7m_nvic_raw_execution_priority(NVICState *s) { - NVICState *s = opaque; - return s->exception_prio; } @@ -XXX,XX +XXX,XX @@ static void nvic_irq_update(NVICState *s) * if @secure is true and @irq does not specify one of the fixed set * of architecturally banked exceptions. */ -static void armv7m_nvic_clear_pending(void *opaque, int irq, bool secure) +static void armv7m_nvic_clear_pending(NVICState *s, int irq, bool secure) { - NVICState *s = (NVICState *)opaque; VecInfo *vec; assert(irq > ARMV7M_EXCP_RESET && irq < s->num_irq); @@ -XXX,XX +XXX,XX @@ static void do_armv7m_nvic_set_pending(void *opaque, int irq, bool secure, } } -void armv7m_nvic_set_pending(void *opaque, int irq, bool secure) +void armv7m_nvic_set_pending(NVICState *s, int irq, bool secure) { - do_armv7m_nvic_set_pending(opaque, irq, secure, false); + do_armv7m_nvic_set_pending(s, irq, secure, false); } -void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure) +void armv7m_nvic_set_pending_derived(NVICState *s, int irq, bool secure) { - do_armv7m_nvic_set_pending(opaque, irq, secure, true); + do_armv7m_nvic_set_pending(s, irq, secure, true); } -void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure) +void armv7m_nvic_set_pending_lazyfp(NVICState *s, int irq, bool secure) { /* * Pend an exception during lazy FP stacking. This differs @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure) * whether we should escalate depends on the saved context * in the FPCCR register, not on the current state of the CPU/NVIC. */ - NVICState *s = (NVICState *)opaque; bool banked = exc_is_banked(irq); VecInfo *vec; bool targets_secure; @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure) } /* Make pending IRQ active. */ -void armv7m_nvic_acknowledge_irq(void *opaque) +void armv7m_nvic_acknowledge_irq(NVICState *s) { - NVICState *s = (NVICState *)opaque; CPUARMState *env = &s->cpu->env; const int pending = s->vectpending; const int running = nvic_exec_prio(s); @@ -XXX,XX +XXX,XX @@ static bool vectpending_targets_secure(NVICState *s) exc_targets_secure(s, s->vectpending); } -void armv7m_nvic_get_pending_irq_info(void *opaque, +void armv7m_nvic_get_pending_irq_info(NVICState *s, int *pirq, bool *ptargets_secure) { - NVICState *s = (NVICState *)opaque; const int pending = s->vectpending; bool targets_secure; @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_get_pending_irq_info(void *opaque, *pirq = pending; } -int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure) +int armv7m_nvic_complete_irq(NVICState *s, int irq, bool secure) { - NVICState *s = (NVICState *)opaque; VecInfo *vec = NULL; int ret = 0; @@ -XXX,XX +XXX,XX @@ int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure) return ret; } -bool armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) +bool armv7m_nvic_get_ready_status(NVICState *s, int irq, bool secure) { /* * Return whether an exception is "ready", i.e. it is enabled and is @@ -XXX,XX +XXX,XX @@ bool armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) * for non-banked exceptions secure is always false; for banked exceptions * it indicates which of the exceptions is required. */ - NVICState *s = (NVICState *)opaque; bool banked = exc_is_banked(irq); VecInfo *vec; int running = nvic_exec_prio(s); diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ #if !defined(CONFIG_USER_ONLY) #include "hw/loader.h" #include "hw/boards.h" +#include "hw/intc/armv7m_nvic.h" #endif #include "sysemu/tcg.h" #include "sysemu/qtest.h" diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ static void v7m_update_fpccr(CPUARMState *env, uint32_t frameptr, * that we will need later in order to do lazy FP reg stacking. */ bool is_secure = env->v7m.secure; - void *nvic = env->nvic; + NVICState *nvic = env->nvic; /* * Some bits are unbanked and live always in fpccr[M_REG_S]; some bits * are banked and we want to update the bit in the bank for the -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> While dozens of files include "cpu.h", only 3 files require these NVIC helper declarations. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230206223502.25122-12-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/intc/armv7m_nvic.h | 123 ++++++++++++++++++++++++++++++++++ target/arm/cpu.h | 123 ---------------------------------- target/arm/cpu.c | 4 +- target/arm/cpu_tcg.c | 3 + target/arm/m_helper.c | 3 + 5 files changed, 132 insertions(+), 124 deletions(-) diff --git a/include/hw/intc/armv7m_nvic.h b/include/hw/intc/armv7m_nvic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/armv7m_nvic.h +++ b/include/hw/intc/armv7m_nvic.h @@ -XXX,XX +XXX,XX @@ struct NVICState { qemu_irq sysresetreq; }; +/* Interface between CPU and Interrupt controller. */ +/** + * armv7m_nvic_set_pending: mark the specified exception as pending + * @s: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Marks the specified exception as pending. Note that we will assert() + * if @secure is true and @irq does not specify one of the fixed set + * of architecturally banked exceptions. + */ +void armv7m_nvic_set_pending(NVICState *s, int irq, bool secure); +/** + * armv7m_nvic_set_pending_derived: mark this derived exception as pending + * @s: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Similar to armv7m_nvic_set_pending(), but specifically for derived + * exceptions (exceptions generated in the course of trying to take + * a different exception). + */ +void armv7m_nvic_set_pending_derived(NVICState *s, int irq, bool secure); +/** + * armv7m_nvic_set_pending_lazyfp: mark this lazy FP exception as pending + * @s: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Similar to armv7m_nvic_set_pending(), but specifically for exceptions + * generated in the course of lazy stacking of FP registers. + */ +void armv7m_nvic_set_pending_lazyfp(NVICState *s, int irq, bool secure); +/** + * armv7m_nvic_get_pending_irq_info: return highest priority pending + * exception, and whether it targets Secure state + * @s: the NVIC + * @pirq: set to pending exception number + * @ptargets_secure: set to whether pending exception targets Secure + * + * This function writes the number of the highest priority pending + * exception (the one which would be made active by + * armv7m_nvic_acknowledge_irq()) to @pirq, and sets @ptargets_secure + * to true if the current highest priority pending exception should + * be taken to Secure state, false for NS. + */ +void armv7m_nvic_get_pending_irq_info(NVICState *s, int *pirq, + bool *ptargets_secure); +/** + * armv7m_nvic_acknowledge_irq: make highest priority pending exception active + * @s: the NVIC + * + * Move the current highest priority pending exception from the pending + * state to the active state, and update v7m.exception to indicate that + * it is the exception currently being handled. + */ +void armv7m_nvic_acknowledge_irq(NVICState *s); +/** + * armv7m_nvic_complete_irq: complete specified interrupt or exception + * @s: the NVIC + * @irq: the exception number to complete + * @secure: true if this exception was secure + * + * Returns: -1 if the irq was not active + * 1 if completing this irq brought us back to base (no active irqs) + * 0 if there is still an irq active after this one was completed + * (Ignoring -1, this is the same as the RETTOBASE value before completion.) + */ +int armv7m_nvic_complete_irq(NVICState *s, int irq, bool secure); +/** + * armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) + * @s: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Return whether an exception is "ready", i.e. whether the exception is + * enabled and is configured at a priority which would allow it to + * interrupt the current execution priority. This controls whether the + * RDY bit for it in the FPCCR is set. + */ +bool armv7m_nvic_get_ready_status(NVICState *s, int irq, bool secure); +/** + * armv7m_nvic_raw_execution_priority: return the raw execution priority + * @s: the NVIC + * + * Returns: the raw execution priority as defined by the v8M architecture. + * This is the execution priority minus the effects of AIRCR.PRIS, + * and minus any PRIMASK/FAULTMASK/BASEPRI priority boosting. + * (v8M ARM ARM I_PKLD.) + */ +int armv7m_nvic_raw_execution_priority(NVICState *s); +/** + * armv7m_nvic_neg_prio_requested: return true if the requested execution + * priority is negative for the specified security state. + * @s: the NVIC + * @secure: the security state to test + * This corresponds to the pseudocode IsReqExecPriNeg(). + */ +#ifndef CONFIG_USER_ONLY +bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure); +#else +static inline bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure) +{ + return false; +} +#endif +#ifndef CONFIG_USER_ONLY +bool armv7m_nvic_can_take_pending_exception(NVICState *s); +#else +static inline bool armv7m_nvic_can_take_pending_exception(NVICState *s) +{ + return true; +} +#endif + #endif diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void arm_cpu_list(void); uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, uint32_t cur_el, bool secure); -/* Interface between CPU and Interrupt controller. */ -#ifndef CONFIG_USER_ONLY -bool armv7m_nvic_can_take_pending_exception(NVICState *s); -#else -static inline bool armv7m_nvic_can_take_pending_exception(NVICState *s) -{ - return true; -} -#endif -/** - * armv7m_nvic_set_pending: mark the specified exception as pending - * @s: the NVIC - * @irq: the exception number to mark pending - * @secure: false for non-banked exceptions or for the nonsecure - * version of a banked exception, true for the secure version of a banked - * exception. - * - * Marks the specified exception as pending. Note that we will assert() - * if @secure is true and @irq does not specify one of the fixed set - * of architecturally banked exceptions. - */ -void armv7m_nvic_set_pending(NVICState *s, int irq, bool secure); -/** - * armv7m_nvic_set_pending_derived: mark this derived exception as pending - * @s: the NVIC - * @irq: the exception number to mark pending - * @secure: false for non-banked exceptions or for the nonsecure - * version of a banked exception, true for the secure version of a banked - * exception. - * - * Similar to armv7m_nvic_set_pending(), but specifically for derived - * exceptions (exceptions generated in the course of trying to take - * a different exception). - */ -void armv7m_nvic_set_pending_derived(NVICState *s, int irq, bool secure); -/** - * armv7m_nvic_set_pending_lazyfp: mark this lazy FP exception as pending - * @s: the NVIC - * @irq: the exception number to mark pending - * @secure: false for non-banked exceptions or for the nonsecure - * version of a banked exception, true for the secure version of a banked - * exception. - * - * Similar to armv7m_nvic_set_pending(), but specifically for exceptions - * generated in the course of lazy stacking of FP registers. - */ -void armv7m_nvic_set_pending_lazyfp(NVICState *s, int irq, bool secure); -/** - * armv7m_nvic_get_pending_irq_info: return highest priority pending - * exception, and whether it targets Secure state - * @s: the NVIC - * @pirq: set to pending exception number - * @ptargets_secure: set to whether pending exception targets Secure - * - * This function writes the number of the highest priority pending - * exception (the one which would be made active by - * armv7m_nvic_acknowledge_irq()) to @pirq, and sets @ptargets_secure - * to true if the current highest priority pending exception should - * be taken to Secure state, false for NS. - */ -void armv7m_nvic_get_pending_irq_info(NVICState *s, int *pirq, - bool *ptargets_secure); -/** - * armv7m_nvic_acknowledge_irq: make highest priority pending exception active - * @s: the NVIC - * - * Move the current highest priority pending exception from the pending - * state to the active state, and update v7m.exception to indicate that - * it is the exception currently being handled. - */ -void armv7m_nvic_acknowledge_irq(NVICState *s); -/** - * armv7m_nvic_complete_irq: complete specified interrupt or exception - * @s: the NVIC - * @irq: the exception number to complete - * @secure: true if this exception was secure - * - * Returns: -1 if the irq was not active - * 1 if completing this irq brought us back to base (no active irqs) - * 0 if there is still an irq active after this one was completed - * (Ignoring -1, this is the same as the RETTOBASE value before completion.) - */ -int armv7m_nvic_complete_irq(NVICState *s, int irq, bool secure); -/** - * armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) - * @s: the NVIC - * @irq: the exception number to mark pending - * @secure: false for non-banked exceptions or for the nonsecure - * version of a banked exception, true for the secure version of a banked - * exception. - * - * Return whether an exception is "ready", i.e. whether the exception is - * enabled and is configured at a priority which would allow it to - * interrupt the current execution priority. This controls whether the - * RDY bit for it in the FPCCR is set. - */ -bool armv7m_nvic_get_ready_status(NVICState *s, int irq, bool secure); -/** - * armv7m_nvic_raw_execution_priority: return the raw execution priority - * @s: the NVIC - * - * Returns: the raw execution priority as defined by the v8M architecture. - * This is the execution priority minus the effects of AIRCR.PRIS, - * and minus any PRIMASK/FAULTMASK/BASEPRI priority boosting. - * (v8M ARM ARM I_PKLD.) - */ -int armv7m_nvic_raw_execution_priority(NVICState *s); -/** - * armv7m_nvic_neg_prio_requested: return true if the requested execution - * priority is negative for the specified security state. - * @s: the NVIC - * @secure: the security state to test - * This corresponds to the pseudocode IsReqExecPriNeg(). - */ -#ifndef CONFIG_USER_ONLY -bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure); -#else -static inline bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure) -{ - return false; -} -#endif - /* Interface for defining coprocessor registers. * Registers are defined in tables of arm_cp_reginfo structs * which are passed to define_arm_cp_regs(). diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ #if !defined(CONFIG_USER_ONLY) #include "hw/loader.h" #include "hw/boards.h" +#ifdef CONFIG_TCG #include "hw/intc/armv7m_nvic.h" -#endif +#endif /* CONFIG_TCG */ +#endif /* !CONFIG_USER_ONLY */ #include "sysemu/tcg.h" #include "sysemu/qtest.h" #include "sysemu/hw_accel.h" diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #endif #include "cpregs.h" +#if !defined(CONFIG_USER_ONLY) && defined(CONFIG_TCG) +#include "hw/intc/armv7m_nvic.h" +#endif /* Share AArch32 -cpu max features with AArch64. */ diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ #include "exec/cpu_ldst.h" #include "semihosting/common-semi.h" #endif +#if !defined(CONFIG_USER_ONLY) +#include "hw/intc/armv7m_nvic.h" +#endif static void v7m_msr_xpsr(CPUARMState *env, uint32_t mask, uint32_t reg, uint32_t val) -- 2.34.1 From: Alex Bennée <alex.bennee@linaro.org> The two TCG tests for GICv2 and GICv3 are very heavy weight distros that take a long time to boot up, especially for an --enable-debug build. The total code coverage they give is: Overall coverage rate: lines......: 11.2% (59584 of 530123 lines) functions..: 15.0% (7436 of 49443 functions) branches...: 6.3% (19273 of 303933 branches) We already get pretty close to that with the machine_aarch64_virt tests which only does one full boot (~120s vs ~600s) of alpine. We expand the kernel+initrd boot (~8s) to test both GICs and also add an RNG device and a block device to generate a few IRQs and exercise the storage layer. With that we get to a coverage of: Overall coverage rate: lines......: 11.0% (58121 of 530123 lines) functions..: 14.9% (7343 of 49443 functions) branches...: 6.0% (18269 of 303933 branches) which I feel is close enough given the massive time saving. If we want to target any more sub-systems we can use lighter weight more directed tests. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Fabiano Rosas <farosas@suse.de> Acked-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230203181632.2919715-1-alex.bennee@linaro.org Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/avocado/boot_linux.py | 48 ++++---------------- tests/avocado/machine_aarch64_virt.py | 63 ++++++++++++++++++++++++--- 2 files changed, 65 insertions(+), 46 deletions(-) diff --git a/tests/avocado/boot_linux.py b/tests/avocado/boot_linux.py index XXXXXXX..XXXXXXX 100644 --- a/tests/avocado/boot_linux.py +++ b/tests/avocado/boot_linux.py @@ -XXX,XX +XXX,XX @@ def test_pc_q35_kvm(self): self.launch_and_wait(set_up_ssh_connection=False) -# For Aarch64 we only boot KVM tests in CI as the TCG tests are very -# heavyweight. There are lighter weight distros which we use in the -# machine_aarch64_virt.py tests. +# For Aarch64 we only boot KVM tests in CI as booting the current +# Fedora OS in TCG tests is very heavyweight. There are lighter weight +# distros which we use in the machine_aarch64_virt.py tests. class BootLinuxAarch64(LinuxTest): """ :avocado: tags=arch:aarch64 :avocado: tags=machine:virt - :avocado: tags=machine:gic-version=2 """ timeout = 720 - def add_common_args(self): - self.vm.add_args('-bios', - os.path.join(BUILD_DIR, 'pc-bios', - 'edk2-aarch64-code.fd')) - self.vm.add_args('-device', 'virtio-rng-pci,rng=rng0') - self.vm.add_args('-object', 'rng-random,id=rng0,filename=/dev/urandom') - - @skipIf(os.getenv('GITLAB_CI'), 'Running on GitLab') - def test_fedora_cloud_tcg_gicv2(self): - """ - :avocado: tags=accel:tcg - :avocado: tags=cpu:max - :avocado: tags=device:gicv2 - """ - self.require_accelerator("tcg") - self.vm.add_args("-accel", "tcg") - self.vm.add_args("-cpu", "max,lpa2=off") - self.vm.add_args("-machine", "virt,gic-version=2") - self.add_common_args() - self.launch_and_wait(set_up_ssh_connection=False) - - @skipIf(os.getenv('GITLAB_CI'), 'Running on GitLab') - def test_fedora_cloud_tcg_gicv3(self): - """ - :avocado: tags=accel:tcg - :avocado: tags=cpu:max - :avocado: tags=device:gicv3 - """ - self.require_accelerator("tcg") - self.vm.add_args("-accel", "tcg") - self.vm.add_args("-cpu", "max,lpa2=off") - self.vm.add_args("-machine", "virt,gic-version=3") - self.add_common_args() - self.launch_and_wait(set_up_ssh_connection=False) - def test_virt_kvm(self): """ :avocado: tags=accel:kvm @@ -XXX,XX +XXX,XX @@ def test_virt_kvm(self): self.require_accelerator("kvm") self.vm.add_args("-accel", "kvm") self.vm.add_args("-machine", "virt,gic-version=host") - self.add_common_args() + self.vm.add_args('-bios', + os.path.join(BUILD_DIR, 'pc-bios', + 'edk2-aarch64-code.fd')) + self.vm.add_args('-device', 'virtio-rng-pci,rng=rng0') + self.vm.add_args('-object', 'rng-random,id=rng0,filename=/dev/urandom') self.launch_and_wait(set_up_ssh_connection=False) diff --git a/tests/avocado/machine_aarch64_virt.py b/tests/avocado/machine_aarch64_virt.py index XXXXXXX..XXXXXXX 100644 --- a/tests/avocado/machine_aarch64_virt.py +++ b/tests/avocado/machine_aarch64_virt.py @@ -XXX,XX +XXX,XX @@ import time import os +import logging from avocado_qemu import QemuSystemTest from avocado_qemu import wait_for_console_pattern from avocado_qemu import exec_command from avocado_qemu import BUILD_DIR +from avocado.utils import process +from avocado.utils.path import find_command class Aarch64VirtMachine(QemuSystemTest): KERNEL_COMMON_COMMAND_LINE = 'printk.time=0 ' @@ -XXX,XX +XXX,XX @@ def test_alpine_virt_tcg_gic_max(self): self.wait_for_console_pattern('Welcome to Alpine Linux 3.16') - def test_aarch64_virt(self): + def common_aarch64_virt(self, machine): """ - :avocado: tags=arch:aarch64 - :avocado: tags=machine:virt - :avocado: tags=accel:tcg - :avocado: tags=cpu:max + Common code to launch basic virt machine with kernel+initrd + and a scratch disk. """ + logger = logging.getLogger('aarch64_virt') + kernel_url = ('https://fileserver.linaro.org/s/' 'z6B2ARM7DQT3HWN/download') - kernel_hash = 'ed11daab50c151dde0e1e9c9cb8b2d9bd3215347' kernel_path = self.fetch_asset(kernel_url, asset_hash=kernel_hash) @@ -XXX,XX +XXX,XX @@ def test_aarch64_virt(self): 'console=ttyAMA0') self.require_accelerator("tcg") self.vm.add_args('-cpu', 'max,pauth-impdef=on', + '-machine', machine, '-accel', 'tcg', '-kernel', kernel_path, '-append', kernel_command_line) + + # A RNG offers an easy way to generate a few IRQs + self.vm.add_args('-device', 'virtio-rng-pci,rng=rng0') + self.vm.add_args('-object', + 'rng-random,id=rng0,filename=/dev/urandom') + + # Also add a scratch block device + logger.info('creating scratch qcow2 image') + image_path = os.path.join(self.workdir, 'scratch.qcow2') + qemu_img = os.path.join(BUILD_DIR, 'qemu-img') + if not os.path.exists(qemu_img): + qemu_img = find_command('qemu-img', False) + if qemu_img is False: + self.cancel('Could not find "qemu-img", which is required to ' + 'create the temporary qcow2 image') + cmd = '%s create -f qcow2 %s 8M' % (qemu_img, image_path) + process.run(cmd) + + # Add the device + self.vm.add_args('-blockdev', + f"driver=qcow2,file.driver=file,file.filename={image_path},node-name=scratch") + self.vm.add_args('-device', + 'virtio-blk-device,drive=scratch') + self.vm.launch() self.wait_for_console_pattern('Welcome to Buildroot') time.sleep(0.1) exec_command(self, 'root') time.sleep(0.1) + exec_command(self, 'dd if=/dev/hwrng of=/dev/vda bs=512 count=4') + time.sleep(0.1) + exec_command(self, 'md5sum /dev/vda') + time.sleep(0.1) + exec_command(self, 'cat /proc/interrupts') + time.sleep(0.1) exec_command(self, 'cat /proc/self/maps') time.sleep(0.1) + + def test_aarch64_virt_gicv3(self): + """ + :avocado: tags=arch:aarch64 + :avocado: tags=machine:virt + :avocado: tags=accel:tcg + :avocado: tags=cpu:max + """ + self.common_aarch64_virt("virt,gic_version=3") + + def test_aarch64_virt_gicv2(self): + """ + :avocado: tags=arch:aarch64 + :avocado: tags=machine:virt + :avocado: tags=accel:tcg + :avocado: tags=cpu:max + """ + self.common_aarch64_virt("virt,gic-version=2") -- 2.34.1 From: Mostafa Saleh <smostafa@google.com> GBPA register can be used to globally abort all transactions. It is described in the SMMU manual in "6.3.14 SMMU_GBPA". ABORT reset value is IMPLEMENTATION DEFINED, it is chosen to be zero(Do not abort incoming transactions). Other fields have default values of Use Incoming. If UPDATE is not set, the write is ignored. This is the only permitted behavior in SMMUv3.2 and later.(6.3.14.1 Update procedure) As this patch adds a new state to the SMMU (GBPA), it is added in a new subsection for forward migration compatibility. GBPA is only migrated if its value is different from the reset value. It does this to be backward migration compatible if SW didn't write the register. Signed-off-by: Mostafa Saleh <smostafa@google.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20230214094009.2445653-1-smostafa@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/smmuv3-internal.h | 7 +++++++ include/hw/arm/smmuv3.h | 1 + hw/arm/smmuv3.c | 43 +++++++++++++++++++++++++++++++++++++++- 3 files changed, 50 insertions(+), 1 deletion(-) diff --git a/hw/arm/smmuv3-internal.h b/hw/arm/smmuv3-internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3-internal.h +++ b/hw/arm/smmuv3-internal.h @@ -XXX,XX +XXX,XX @@ REG32(CR0ACK, 0x24) REG32(CR1, 0x28) REG32(CR2, 0x2c) REG32(STATUSR, 0x40) +REG32(GBPA, 0x44) + FIELD(GBPA, ABORT, 20, 1) + FIELD(GBPA, UPDATE, 31, 1) + +/* Use incoming. */ +#define SMMU_GBPA_RESET_VAL 0x1000 + REG32(IRQ_CTRL, 0x50) FIELD(IRQ_CTRL, GERROR_IRQEN, 0, 1) FIELD(IRQ_CTRL, PRI_IRQEN, 1, 1) diff --git a/include/hw/arm/smmuv3.h b/include/hw/arm/smmuv3.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/smmuv3.h +++ b/include/hw/arm/smmuv3.h @@ -XXX,XX +XXX,XX @@ struct SMMUv3State { uint32_t cr[3]; uint32_t cr0ack; uint32_t statusr; + uint32_t gbpa; uint32_t irq_ctrl; uint32_t gerror; uint32_t gerrorn; diff --git a/hw/arm/smmuv3.c b/hw/arm/smmuv3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3.c +++ b/hw/arm/smmuv3.c @@ -XXX,XX +XXX,XX @@ static void smmuv3_init_regs(SMMUv3State *s) s->gerror = 0; s->gerrorn = 0; s->statusr = 0; + s->gbpa = SMMU_GBPA_RESET_VAL; } static int smmu_get_ste(SMMUv3State *s, dma_addr_t addr, STE *buf, @@ -XXX,XX +XXX,XX @@ static IOMMUTLBEntry smmuv3_translate(IOMMUMemoryRegion *mr, hwaddr addr, qemu_mutex_lock(&s->mutex); if (!smmu_enabled(s)) { - status = SMMU_TRANS_DISABLE; + if (FIELD_EX32(s->gbpa, GBPA, ABORT)) { + status = SMMU_TRANS_ABORT; + } else { + status = SMMU_TRANS_DISABLE; + } goto epilogue; } @@ -XXX,XX +XXX,XX @@ static MemTxResult smmu_writel(SMMUv3State *s, hwaddr offset, case A_GERROR_IRQ_CFG2: s->gerror_irq_cfg2 = data; return MEMTX_OK; + case A_GBPA: + /* + * If UPDATE is not set, the write is ignored. This is the only + * permitted behavior in SMMUv3.2 and later. + */ + if (data & R_GBPA_UPDATE_MASK) { + /* Ignore update bit as write is synchronous. */ + s->gbpa = data & ~R_GBPA_UPDATE_MASK; + } + return MEMTX_OK; case A_STRTAB_BASE: /* 64b */ s->strtab_base = deposit64(s->strtab_base, 0, 32, data); return MEMTX_OK; @@ -XXX,XX +XXX,XX @@ static MemTxResult smmu_readl(SMMUv3State *s, hwaddr offset, case A_STATUSR: *data = s->statusr; return MEMTX_OK; + case A_GBPA: + *data = s->gbpa; + return MEMTX_OK; case A_IRQ_CTRL: case A_IRQ_CTRL_ACK: *data = s->irq_ctrl; @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_smmuv3_queue = { }, }; +static bool smmuv3_gbpa_needed(void *opaque) +{ + SMMUv3State *s = opaque; + + /* Only migrate GBPA if it has different reset value. */ + return s->gbpa != SMMU_GBPA_RESET_VAL; +} + +static const VMStateDescription vmstate_gbpa = { + .name = "smmuv3/gbpa", + .version_id = 1, + .minimum_version_id = 1, + .needed = smmuv3_gbpa_needed, + .fields = (VMStateField[]) { + VMSTATE_UINT32(gbpa, SMMUv3State), + VMSTATE_END_OF_LIST() + } +}; + static const VMStateDescription vmstate_smmuv3 = { .name = "smmuv3", .version_id = 1, @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_smmuv3 = { VMSTATE_END_OF_LIST(), }, + .subsections = (const VMStateDescription * []) { + &vmstate_gbpa, + NULL + } }; static void smmuv3_instance_init(Object *obj) -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Since commit acc0b8b05a when running the ZynqMP ZCU102 board with a QEMU configured using --without-default-devices, we get: $ qemu-system-aarch64 -M xlnx-zcu102 qemu-system-aarch64: missing object type 'usb_dwc3' Abort trap: 6 Fix by adding the missing Kconfig dependency. Fixes: acc0b8b05a ("hw/arm/xlnx-zynqmp: Connect ZynqMP's USB controllers") Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230216092327.2203-1-philmd@linaro.org Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config XLNX_ZYNQMP_ARM select XLNX_CSU_DMA select XLNX_ZYNQMP select XLNX_ZDMA + select USB_DWC3 config XLNX_VERSAL bool -- 2.34.1 From: Cornelia Huck <cohuck@redhat.com> Just use current_accel_name() directly. Signed-off-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) if (vms->secure && (kvm_enabled() || hvf_enabled())) { error_report("mach-virt: %s does not support providing " "Security extensions (TrustZone) to the guest CPU", - kvm_enabled() ? "KVM" : "HVF"); + current_accel_name()); exit(1); } if (vms->virt && (kvm_enabled() || hvf_enabled())) { error_report("mach-virt: %s does not support providing " "Virtualization extensions to the guest CPU", - kvm_enabled() ? "KVM" : "HVF"); + current_accel_name()); exit(1); } if (vms->mte && (kvm_enabled() || hvf_enabled())) { error_report("mach-virt: %s does not support providing " "MTE to the guest CPU", - kvm_enabled() ? "KVM" : "HVF"); + current_accel_name()); exit(1); } -- 2.34.1 From: Hao Wu <wuhaotsh@google.com> Havard is no longer working on the Nuvoton systems for a while and won't be able to do any work on it in the future. So I'll take over maintaining the Nuvoton system from him. Signed-off-by: Hao Wu <wuhaotsh@google.com> Acked-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Message-id: 20230208235433.3989937-2-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/net/mv88w8618_eth.h F: docs/system/arm/musicpal.rst Nuvoton NPCM7xx -M: Havard Skinnemoen <hskinnemoen@google.com> M: Tyrone Ting <kfting@nuvoton.com> +M: Hao Wu <wuhaotsh@google.com> L: qemu-arm@nongnu.org S: Supported F: hw/*/npcm7xx* -- 2.34.1 From: Hao Wu <wuhaotsh@google.com> Nuvoton's PSPI is a general purpose SPI module which enables connections to SPI-based peripheral devices. Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Chris Rauer <crauer@google.com> Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Message-id: 20230208235433.3989937-3-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 6 +- include/hw/ssi/npcm_pspi.h | 53 +++++++++ hw/ssi/npcm_pspi.c | 221 +++++++++++++++++++++++++++++++++++++ hw/ssi/meson.build | 2 +- hw/ssi/trace-events | 5 + 5 files changed, 283 insertions(+), 4 deletions(-) create mode 100644 include/hw/ssi/npcm_pspi.h create mode 100644 hw/ssi/npcm_pspi.c diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ M: Tyrone Ting <kfting@nuvoton.com> M: Hao Wu <wuhaotsh@google.com> L: qemu-arm@nongnu.org S: Supported -F: hw/*/npcm7xx* -F: include/hw/*/npcm7xx* -F: tests/qtest/npcm7xx* +F: hw/*/npcm* +F: include/hw/*/npcm* +F: tests/qtest/npcm* F: pc-bios/npcm7xx_bootrom.bin F: roms/vbootrom F: docs/system/arm/nuvoton.rst diff --git a/include/hw/ssi/npcm_pspi.h b/include/hw/ssi/npcm_pspi.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/ssi/npcm_pspi.h @@ -XXX,XX +XXX,XX @@ +/* + * Nuvoton Peripheral SPI Module + * + * Copyright 2023 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ +#ifndef NPCM_PSPI_H +#define NPCM_PSPI_H + +#include "hw/ssi/ssi.h" +#include "hw/sysbus.h" + +/* + * Number of registers in our device state structure. Don't change this without + * incrementing the version_id in the vmstate. + */ +#define NPCM_PSPI_NR_REGS 3 + +/** + * NPCMPSPIState - Device state for one Flash Interface Unit. + * @parent: System bus device. + * @mmio: Memory region for register access. + * @spi: The SPI bus mastered by this controller. + * @regs: Register contents. + * @irq: The interrupt request queue for this module. + * + * Each PSPI has a shared bank of registers, and controls up to four chip + * selects. Each chip select has a dedicated memory region which may be used to + * read and write the flash connected to that chip select as if it were memory. + */ +typedef struct NPCMPSPIState { + SysBusDevice parent; + + MemoryRegion mmio; + + SSIBus *spi; + uint16_t regs[NPCM_PSPI_NR_REGS]; + qemu_irq irq; +} NPCMPSPIState; + +#define TYPE_NPCM_PSPI "npcm-pspi" +OBJECT_DECLARE_SIMPLE_TYPE(NPCMPSPIState, NPCM_PSPI) + +#endif /* NPCM_PSPI_H */ diff --git a/hw/ssi/npcm_pspi.c b/hw/ssi/npcm_pspi.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/ssi/npcm_pspi.c @@ -XXX,XX +XXX,XX @@ +/* + * Nuvoton NPCM Peripheral SPI Module (PSPI) + * + * Copyright 2023 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" + +#include "hw/irq.h" +#include "hw/registerfields.h" +#include "hw/ssi/npcm_pspi.h" +#include "migration/vmstate.h" +#include "qapi/error.h" +#include "qemu/error-report.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "qemu/units.h" + +#include "trace.h" + +REG16(PSPI_DATA, 0x0) +REG16(PSPI_CTL1, 0x2) + FIELD(PSPI_CTL1, SPIEN, 0, 1) + FIELD(PSPI_CTL1, MOD, 2, 1) + FIELD(PSPI_CTL1, EIR, 5, 1) + FIELD(PSPI_CTL1, EIW, 6, 1) + FIELD(PSPI_CTL1, SCM, 7, 1) + FIELD(PSPI_CTL1, SCIDL, 8, 1) + FIELD(PSPI_CTL1, SCDV, 9, 7) +REG16(PSPI_STAT, 0x4) + FIELD(PSPI_STAT, BSY, 0, 1) + FIELD(PSPI_STAT, RBF, 1, 1) + +static void npcm_pspi_update_irq(NPCMPSPIState *s) +{ + int level = 0; + + /* Only fire IRQ when the module is enabled. */ + if (FIELD_EX16(s->regs[R_PSPI_CTL1], PSPI_CTL1, SPIEN)) { + /* Update interrupt as BSY is cleared. */ + if ((!FIELD_EX16(s->regs[R_PSPI_STAT], PSPI_STAT, BSY)) && + FIELD_EX16(s->regs[R_PSPI_CTL1], PSPI_CTL1, EIW)) { + level = 1; + } + + /* Update interrupt as RBF is set. */ + if (FIELD_EX16(s->regs[R_PSPI_STAT], PSPI_STAT, RBF) && + FIELD_EX16(s->regs[R_PSPI_CTL1], PSPI_CTL1, EIR)) { + level = 1; + } + } + qemu_set_irq(s->irq, level); +} + +static uint16_t npcm_pspi_read_data(NPCMPSPIState *s) +{ + uint16_t value = s->regs[R_PSPI_DATA]; + + /* Clear stat bits as the value are read out. */ + s->regs[R_PSPI_STAT] = 0; + + return value; +} + +static void npcm_pspi_write_data(NPCMPSPIState *s, uint16_t data) +{ + uint16_t value = 0; + + if (FIELD_EX16(s->regs[R_PSPI_CTL1], PSPI_CTL1, MOD)) { + value = ssi_transfer(s->spi, extract16(data, 8, 8)) << 8; + } + value |= ssi_transfer(s->spi, extract16(data, 0, 8)); + s->regs[R_PSPI_DATA] = value; + + /* Mark data as available */ + s->regs[R_PSPI_STAT] = R_PSPI_STAT_BSY_MASK | R_PSPI_STAT_RBF_MASK; +} + +/* Control register read handler. */ +static uint64_t npcm_pspi_ctrl_read(void *opaque, hwaddr addr, + unsigned int size) +{ + NPCMPSPIState *s = opaque; + uint16_t value; + + switch (addr) { + case A_PSPI_DATA: + value = npcm_pspi_read_data(s); + break; + + case A_PSPI_CTL1: + value = s->regs[R_PSPI_CTL1]; + break; + + case A_PSPI_STAT: + value = s->regs[R_PSPI_STAT]; + break; + + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to invalid offset 0x%" PRIx64 "\n", + DEVICE(s)->canonical_path, addr); + return 0; + } + trace_npcm_pspi_ctrl_read(DEVICE(s)->canonical_path, addr, value); + npcm_pspi_update_irq(s); + + return value; +} + +/* Control register write handler. */ +static void npcm_pspi_ctrl_write(void *opaque, hwaddr addr, uint64_t v, + unsigned int size) +{ + NPCMPSPIState *s = opaque; + uint16_t value = v; + + trace_npcm_pspi_ctrl_write(DEVICE(s)->canonical_path, addr, value); + + switch (addr) { + case A_PSPI_DATA: + npcm_pspi_write_data(s, value); + break; + + case A_PSPI_CTL1: + s->regs[R_PSPI_CTL1] = value; + break; + + case A_PSPI_STAT: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to read-only register PSPI_STAT: 0x%08" + PRIx64 "\n", DEVICE(s)->canonical_path, v); + break; + + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to invalid offset 0x%" PRIx64 "\n", + DEVICE(s)->canonical_path, addr); + return; + } + npcm_pspi_update_irq(s); +} + +static const MemoryRegionOps npcm_pspi_ctrl_ops = { + .read = npcm_pspi_ctrl_read, + .write = npcm_pspi_ctrl_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid = { + .min_access_size = 1, + .max_access_size = 2, + .unaligned = false, + }, + .impl = { + .min_access_size = 2, + .max_access_size = 2, + .unaligned = false, + }, +}; + +static void npcm_pspi_enter_reset(Object *obj, ResetType type) +{ + NPCMPSPIState *s = NPCM_PSPI(obj); + + trace_npcm_pspi_enter_reset(DEVICE(obj)->canonical_path, type); + memset(s->regs, 0, sizeof(s->regs)); +} + +static void npcm_pspi_realize(DeviceState *dev, Error **errp) +{ + NPCMPSPIState *s = NPCM_PSPI(dev); + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); + Object *obj = OBJECT(dev); + + s->spi = ssi_create_bus(dev, "pspi"); + memory_region_init_io(&s->mmio, obj, &npcm_pspi_ctrl_ops, s, + "mmio", 4 * KiB); + sysbus_init_mmio(sbd, &s->mmio); + sysbus_init_irq(sbd, &s->irq); +} + +static const VMStateDescription vmstate_npcm_pspi = { + .name = "npcm-pspi", + .version_id = 0, + .minimum_version_id = 0, + .fields = (VMStateField[]) { + VMSTATE_UINT16_ARRAY(regs, NPCMPSPIState, NPCM_PSPI_NR_REGS), + VMSTATE_END_OF_LIST(), + }, +}; + + +static void npcm_pspi_class_init(ObjectClass *klass, void *data) +{ + ResettableClass *rc = RESETTABLE_CLASS(klass); + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->desc = "NPCM Peripheral SPI Module"; + dc->realize = npcm_pspi_realize; + dc->vmsd = &vmstate_npcm_pspi; + rc->phases.enter = npcm_pspi_enter_reset; +} + +static const TypeInfo npcm_pspi_types[] = { + { + .name = TYPE_NPCM_PSPI, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(NPCMPSPIState), + .class_init = npcm_pspi_class_init, + }, +}; +DEFINE_TYPES(npcm_pspi_types); diff --git a/hw/ssi/meson.build b/hw/ssi/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/meson.build +++ b/hw/ssi/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_smc.c')) softmmu_ss.add(when: 'CONFIG_MSF2', if_true: files('mss-spi.c')) -softmmu_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx_fiu.c')) +softmmu_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx_fiu.c', 'npcm_pspi.c')) softmmu_ss.add(when: 'CONFIG_PL022', if_true: files('pl022.c')) softmmu_ss.add(when: 'CONFIG_SIFIVE_SPI', if_true: files('sifive_spi.c')) softmmu_ss.add(when: 'CONFIG_SSI', if_true: files('ssi.c')) diff --git a/hw/ssi/trace-events b/hw/ssi/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/trace-events +++ b/hw/ssi/trace-events @@ -XXX,XX +XXX,XX @@ npcm7xx_fiu_ctrl_write(const char *id, uint64_t addr, uint32_t data) "%s offset: npcm7xx_fiu_flash_read(const char *id, int cs, uint64_t addr, unsigned int size, uint64_t value) "%s[%d] offset: 0x%08" PRIx64 " size: %u value: 0x%" PRIx64 npcm7xx_fiu_flash_write(const char *id, unsigned cs, uint64_t addr, unsigned int size, uint64_t value) "%s[%d] offset: 0x%08" PRIx64 " size: %u value: 0x%" PRIx64 +# npcm_pspi.c +npcm_pspi_enter_reset(const char *id, int reset_type) "%s reset type: %d" +npcm_pspi_ctrl_read(const char *id, uint64_t addr, uint16_t data) "%s offset: 0x%03" PRIx64 " value: 0x%04" PRIx16 +npcm_pspi_ctrl_write(const char *id, uint64_t addr, uint16_t data) "%s offset: 0x%03" PRIx64 " value: 0x%04" PRIx16 + # ibex_spi_host.c ibex_spi_host_reset(const char *msg) "%s" -- 2.34.1 From: Hao Wu <wuhaotsh@google.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Titus Rwantare <titusr@google.com> Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Message-id: 20230208235433.3989937-4-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/nuvoton.rst | 2 +- include/hw/arm/npcm7xx.h | 2 ++ hw/arm/npcm7xx.c | 25 +++++++++++++++++++++++-- 3 files changed, 26 insertions(+), 3 deletions(-) diff --git a/docs/system/arm/nuvoton.rst b/docs/system/arm/nuvoton.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/nuvoton.rst +++ b/docs/system/arm/nuvoton.rst @@ -XXX,XX +XXX,XX @@ Supported devices * SMBus controller (SMBF) * Ethernet controller (EMC) * Tachometer + * Peripheral SPI controller (PSPI) Missing devices --------------- @@ -XXX,XX +XXX,XX @@ Missing devices * Ethernet controller (GMAC) * USB device (USBD) - * Peripheral SPI controller (PSPI) * SD/MMC host * PECI interface * PCI and PCIe root complex and bridges diff --git a/include/hw/arm/npcm7xx.h b/include/hw/arm/npcm7xx.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/npcm7xx.h +++ b/include/hw/arm/npcm7xx.h @@ -XXX,XX +XXX,XX @@ #include "hw/nvram/npcm7xx_otp.h" #include "hw/timer/npcm7xx_timer.h" #include "hw/ssi/npcm7xx_fiu.h" +#include "hw/ssi/npcm_pspi.h" #include "hw/usb/hcd-ehci.h" #include "hw/usb/hcd-ohci.h" #include "target/arm/cpu.h" @@ -XXX,XX +XXX,XX @@ struct NPCM7xxState { NPCM7xxFIUState fiu[2]; NPCM7xxEMCState emc[2]; NPCM7xxSDHCIState mmc; + NPCMPSPIState pspi[2]; }; #define TYPE_NPCM7XX "npcm7xx" diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm7xx.c +++ b/hw/arm/npcm7xx.c @@ -XXX,XX +XXX,XX @@ enum NPCM7xxInterrupt { NPCM7XX_EMC1RX_IRQ = 15, NPCM7XX_EMC1TX_IRQ, NPCM7XX_MMC_IRQ = 26, + NPCM7XX_PSPI2_IRQ = 28, + NPCM7XX_PSPI1_IRQ = 31, NPCM7XX_TIMER0_IRQ = 32, /* Timer Module 0 */ NPCM7XX_TIMER1_IRQ, NPCM7XX_TIMER2_IRQ, @@ -XXX,XX +XXX,XX @@ static const hwaddr npcm7xx_emc_addr[] = { 0xf0826000, }; +/* Register base address for each PSPI Module */ +static const hwaddr npcm7xx_pspi_addr[] = { + 0xf0200000, + 0xf0201000, +}; + static const struct { hwaddr regs_addr; uint32_t unconnected_pins; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_init(Object *obj) object_initialize_child(obj, "emc[*]", &s->emc[i], TYPE_NPCM7XX_EMC); } + for (i = 0; i < ARRAY_SIZE(s->pspi); i++) { + object_initialize_child(obj, "pspi[*]", &s->pspi[i], TYPE_NPCM_PSPI); + } + object_initialize_child(obj, "mmc", &s->mmc, TYPE_NPCM7XX_SDHCI); } @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) sysbus_connect_irq(SYS_BUS_DEVICE(&s->mmc), 0, npcm7xx_irq(s, NPCM7XX_MMC_IRQ)); + /* PSPI */ + QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_pspi_addr) != ARRAY_SIZE(s->pspi)); + for (i = 0; i < ARRAY_SIZE(s->pspi); i++) { + SysBusDevice *sbd = SYS_BUS_DEVICE(&s->pspi[i]); + int irq = (i == 0) ? NPCM7XX_PSPI1_IRQ : NPCM7XX_PSPI2_IRQ; + + sysbus_realize(sbd, &error_abort); + sysbus_mmio_map(sbd, 0, npcm7xx_pspi_addr[i]); + sysbus_connect_irq(sbd, 0, npcm7xx_irq(s, irq)); + } + create_unimplemented_device("npcm7xx.shm", 0xc0001000, 4 * KiB); create_unimplemented_device("npcm7xx.vdmx", 0xe0800000, 4 * KiB); create_unimplemented_device("npcm7xx.pcierc", 0xe1000000, 64 * KiB); @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) create_unimplemented_device("npcm7xx.peci", 0xf0100000, 4 * KiB); create_unimplemented_device("npcm7xx.siox[1]", 0xf0101000, 4 * KiB); create_unimplemented_device("npcm7xx.siox[2]", 0xf0102000, 4 * KiB); - create_unimplemented_device("npcm7xx.pspi1", 0xf0200000, 4 * KiB); - create_unimplemented_device("npcm7xx.pspi2", 0xf0201000, 4 * KiB); create_unimplemented_device("npcm7xx.ahbpci", 0xf0400000, 1 * MiB); create_unimplemented_device("npcm7xx.mcphy", 0xf05f0000, 64 * KiB); create_unimplemented_device("npcm7xx.gmac1", 0xf0802000, 8 * KiB); -- 2.34.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> Addresses targeting the second translation table (TTB1) in the SMMU have all upper bits set. Ensure the IOMMU region covers all 64 bits. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20230214171921.1917916-2-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/smmu-common.h | 2 -- hw/arm/smmu-common.c | 2 +- 2 files changed, 1 insertion(+), 3 deletions(-) diff --git a/include/hw/arm/smmu-common.h b/include/hw/arm/smmu-common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/smmu-common.h +++ b/include/hw/arm/smmu-common.h @@ -XXX,XX +XXX,XX @@ #define SMMU_PCI_DEVFN_MAX 256 #define SMMU_PCI_DEVFN(sid) (sid & 0xFF) -#define SMMU_MAX_VA_BITS 48 - /* * Page table walk error types */ diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-common.c +++ b/hw/arm/smmu-common.c @@ -XXX,XX +XXX,XX @@ static AddressSpace *smmu_find_add_as(PCIBus *bus, void *opaque, int devfn) memory_region_init_iommu(&sdev->iommu, sizeof(sdev->iommu), s->mrtypename, - OBJECT(s), name, 1ULL << SMMU_MAX_VA_BITS); + OBJECT(s), name, UINT64_MAX); address_space_init(&sdev->as, MEMORY_REGION(&sdev->iommu), name); trace_smmu_add_mr(name); -- 2.34.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> Addresses targeting the second translation table (TTB1) in the SMMU have all upper bits set (except for the top byte when TBI is enabled). Fix the TTB1 check. Reported-by: Ola Hugosson <ola.hugosson@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20230214171921.1917916-3-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/smmu-common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-common.c +++ b/hw/arm/smmu-common.c @@ -XXX,XX +XXX,XX @@ SMMUTransTableInfo *select_tt(SMMUTransCfg *cfg, dma_addr_t iova) /* there is a ttbr0 region and we are in it (high bits all zero) */ return &cfg->tt[0]; } else if (cfg->tt[1].tsz && - !extract64(iova, 64 - cfg->tt[1].tsz, cfg->tt[1].tsz - tbi_byte)) { + sextract64(iova, 64 - cfg->tt[1].tsz, cfg->tt[1].tsz - tbi_byte) == -1) { /* there is a ttbr1 region and we are in it (high bits all one) */ return &cfg->tt[1]; } else if (!cfg->tt[0].tsz) { -- 2.34.1 From: Claudio Fontana <cfontana@suse.de> make it clearer from the name that this is a tcg-only function. Signed-off-by: Claudio Fontana <cfontana@suse.de> Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch64(CPUState *cs) * trapped to the hypervisor in KVM. */ #ifdef CONFIG_TCG -static void handle_semihosting(CPUState *cs) +static void tcg_handle_semihosting(CPUState *cs) { ARMCPU *cpu = ARM_CPU(cs); CPUARMState *env = &cpu->env; @@ -XXX,XX +XXX,XX @@ void arm_cpu_do_interrupt(CPUState *cs) */ #ifdef CONFIG_TCG if (cs->exception_index == EXCP_SEMIHOST) { - handle_semihosting(cs); + tcg_handle_semihosting(cs); return; } #endif -- 2.34.1 From: Claudio Fontana <cfontana@suse.de> for "all" builds (tcg + kvm), we want to avoid doing the psci check if tcg is built-in, but not enabled. Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Fabiano Rosas <farosas@suse.de> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "sysemu/cpu-timers.h" #include "sysemu/kvm.h" +#include "sysemu/tcg.h" #include "qapi/qapi-commands-machine-target.h" #include "qapi/error.h" #include "qemu/guest-random.h" @@ -XXX,XX +XXX,XX @@ void arm_cpu_do_interrupt(CPUState *cs) env->exception.syndrome); } - if (arm_is_psci_call(cpu, cs->exception_index)) { + if (tcg_enabled() && arm_is_psci_call(cpu, cs->exception_index)) { arm_handle_psci_call(cpu); qemu_log_mask(CPU_LOG_INT, "...handled as PSCI call\n"); return; -- 2.34.1 From: Claudio Fontana <cfontana@suse.de> Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Fabiano Rosas <farosas@suse.de> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch64(CPUState *cs) unsigned int cur_el = arm_current_el(env); int rt; - /* - * Note that new_el can never be 0. If cur_el is 0, then - * el0_a64 is is_a64(), else el0_a64 is ignored. - */ - aarch64_sve_change_el(env, cur_el, new_el, is_a64(env)); + if (tcg_enabled()) { + /* + * Note that new_el can never be 0. If cur_el is 0, then + * el0_a64 is is_a64(), else el0_a64 is ignored. + */ + aarch64_sve_change_el(env, cur_el, new_el, is_a64(env)); + } if (cur_el < new_el) { /* -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> Move this earlier to make the next patch diff cleaner. While here update the comment slightly to not give the impression that the misalignment affects only TCG. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Fabiano Rosas <farosas@suse.de> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/machine.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id) } } + /* + * Misaligned thumb pc is architecturally impossible. Fail the + * incoming migration. For TCG it would trigger the assert in + * thumb_tr_translate_insn(). + */ + if (!is_a64(env) && env->thumb && (env->regs[15] & 1)) { + return -1; + } + hw_breakpoint_update_all(cpu); hw_watchpoint_update_all(cpu); @@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id) } } - /* - * Misaligned thumb pc is architecturally impossible. - * We have an assert in thumb_tr_translate_insn to verify this. - * Fail an incoming migrate to avoid this assert. - */ - if (!is_a64(env) && env->thumb && (env->regs[15] & 1)) { - return -1; - } - if (!kvm_enabled()) { pmu_op_finish(&cpu->env); } -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> Since commit cf7c6d1004 ("target/arm: Split out cpregs.h") we now have a cpregs.h header which is more suitable for this code. Code moved verbatim. Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpregs.h | 98 +++++++++++++++++++++++++++++++++++++++++++++ target/arm/cpu.h | 91 ----------------------------------------- 2 files changed, 98 insertions(+), 91 deletions(-) diff --git a/target/arm/cpregs.h b/target/arm/cpregs.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpregs.h +++ b/target/arm/cpregs.h @@ -XXX,XX +XXX,XX @@ enum { ARM_CP_SME = 1 << 19, }; +/* + * Interface for defining coprocessor registers. + * Registers are defined in tables of arm_cp_reginfo structs + * which are passed to define_arm_cp_regs(). + */ + +/* + * When looking up a coprocessor register we look for it + * via an integer which encodes all of: + * coprocessor number + * Crn, Crm, opc1, opc2 fields + * 32 or 64 bit register (ie is it accessed via MRC/MCR + * or via MRRC/MCRR?) + * non-secure/secure bank (AArch32 only) + * We allow 4 bits for opc1 because MRRC/MCRR have a 4 bit field. + * (In this case crn and opc2 should be zero.) + * For AArch64, there is no 32/64 bit size distinction; + * instead all registers have a 2 bit op0, 3 bit op1 and op2, + * and 4 bit CRn and CRm. The encoding patterns are chosen + * to be easy to convert to and from the KVM encodings, and also + * so that the hashtable can contain both AArch32 and AArch64 + * registers (to allow for interprocessing where we might run + * 32 bit code on a 64 bit core). + */ +/* + * This bit is private to our hashtable cpreg; in KVM register + * IDs the AArch64/32 distinction is the KVM_REG_ARM/ARM64 + * in the upper bits of the 64 bit ID. + */ +#define CP_REG_AA64_SHIFT 28 +#define CP_REG_AA64_MASK (1 << CP_REG_AA64_SHIFT) + +/* + * To enable banking of coprocessor registers depending on ns-bit we + * add a bit to distinguish between secure and non-secure cpregs in the + * hashtable. + */ +#define CP_REG_NS_SHIFT 29 +#define CP_REG_NS_MASK (1 << CP_REG_NS_SHIFT) + +#define ENCODE_CP_REG(cp, is64, ns, crn, crm, opc1, opc2) \ + ((ns) << CP_REG_NS_SHIFT | ((cp) << 16) | ((is64) << 15) | \ + ((crn) << 11) | ((crm) << 7) | ((opc1) << 3) | (opc2)) + +#define ENCODE_AA64_CP_REG(cp, crn, crm, op0, op1, op2) \ + (CP_REG_AA64_MASK | \ + ((cp) << CP_REG_ARM_COPROC_SHIFT) | \ + ((op0) << CP_REG_ARM64_SYSREG_OP0_SHIFT) | \ + ((op1) << CP_REG_ARM64_SYSREG_OP1_SHIFT) | \ + ((crn) << CP_REG_ARM64_SYSREG_CRN_SHIFT) | \ + ((crm) << CP_REG_ARM64_SYSREG_CRM_SHIFT) | \ + ((op2) << CP_REG_ARM64_SYSREG_OP2_SHIFT)) + +/* + * Convert a full 64 bit KVM register ID to the truncated 32 bit + * version used as a key for the coprocessor register hashtable + */ +static inline uint32_t kvm_to_cpreg_id(uint64_t kvmid) +{ + uint32_t cpregid = kvmid; + if ((kvmid & CP_REG_ARCH_MASK) == CP_REG_ARM64) { + cpregid |= CP_REG_AA64_MASK; + } else { + if ((kvmid & CP_REG_SIZE_MASK) == CP_REG_SIZE_U64) { + cpregid |= (1 << 15); + } + + /* + * KVM is always non-secure so add the NS flag on AArch32 register + * entries. + */ + cpregid |= 1 << CP_REG_NS_SHIFT; + } + return cpregid; +} + +/* + * Convert a truncated 32 bit hashtable key into the full + * 64 bit KVM register ID. + */ +static inline uint64_t cpreg_to_kvm_id(uint32_t cpregid) +{ + uint64_t kvmid; + + if (cpregid & CP_REG_AA64_MASK) { + kvmid = cpregid & ~CP_REG_AA64_MASK; + kvmid |= CP_REG_SIZE_U64 | CP_REG_ARM64; + } else { + kvmid = cpregid & ~(1 << 15); + if (cpregid & (1 << 15)) { + kvmid |= CP_REG_SIZE_U64 | CP_REG_ARM; + } else { + kvmid |= CP_REG_SIZE_U32 | CP_REG_ARM; + } + } + return kvmid; +} + /* * Valid values for ARMCPRegInfo state field, indicating which of * the AArch32 and AArch64 execution states this register is visible in. diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void arm_cpu_list(void); uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, uint32_t cur_el, bool secure); -/* Interface for defining coprocessor registers. - * Registers are defined in tables of arm_cp_reginfo structs - * which are passed to define_arm_cp_regs(). - */ - -/* When looking up a coprocessor register we look for it - * via an integer which encodes all of: - * coprocessor number - * Crn, Crm, opc1, opc2 fields - * 32 or 64 bit register (ie is it accessed via MRC/MCR - * or via MRRC/MCRR?) - * non-secure/secure bank (AArch32 only) - * We allow 4 bits for opc1 because MRRC/MCRR have a 4 bit field. - * (In this case crn and opc2 should be zero.) - * For AArch64, there is no 32/64 bit size distinction; - * instead all registers have a 2 bit op0, 3 bit op1 and op2, - * and 4 bit CRn and CRm. The encoding patterns are chosen - * to be easy to convert to and from the KVM encodings, and also - * so that the hashtable can contain both AArch32 and AArch64 - * registers (to allow for interprocessing where we might run - * 32 bit code on a 64 bit core). - */ -/* This bit is private to our hashtable cpreg; in KVM register - * IDs the AArch64/32 distinction is the KVM_REG_ARM/ARM64 - * in the upper bits of the 64 bit ID. - */ -#define CP_REG_AA64_SHIFT 28 -#define CP_REG_AA64_MASK (1 << CP_REG_AA64_SHIFT) - -/* To enable banking of coprocessor registers depending on ns-bit we - * add a bit to distinguish between secure and non-secure cpregs in the - * hashtable. - */ -#define CP_REG_NS_SHIFT 29 -#define CP_REG_NS_MASK (1 << CP_REG_NS_SHIFT) - -#define ENCODE_CP_REG(cp, is64, ns, crn, crm, opc1, opc2) \ - ((ns) << CP_REG_NS_SHIFT | ((cp) << 16) | ((is64) << 15) | \ - ((crn) << 11) | ((crm) << 7) | ((opc1) << 3) | (opc2)) - -#define ENCODE_AA64_CP_REG(cp, crn, crm, op0, op1, op2) \ - (CP_REG_AA64_MASK | \ - ((cp) << CP_REG_ARM_COPROC_SHIFT) | \ - ((op0) << CP_REG_ARM64_SYSREG_OP0_SHIFT) | \ - ((op1) << CP_REG_ARM64_SYSREG_OP1_SHIFT) | \ - ((crn) << CP_REG_ARM64_SYSREG_CRN_SHIFT) | \ - ((crm) << CP_REG_ARM64_SYSREG_CRM_SHIFT) | \ - ((op2) << CP_REG_ARM64_SYSREG_OP2_SHIFT)) - -/* Convert a full 64 bit KVM register ID to the truncated 32 bit - * version used as a key for the coprocessor register hashtable - */ -static inline uint32_t kvm_to_cpreg_id(uint64_t kvmid) -{ - uint32_t cpregid = kvmid; - if ((kvmid & CP_REG_ARCH_MASK) == CP_REG_ARM64) { - cpregid |= CP_REG_AA64_MASK; - } else { - if ((kvmid & CP_REG_SIZE_MASK) == CP_REG_SIZE_U64) { - cpregid |= (1 << 15); - } - - /* KVM is always non-secure so add the NS flag on AArch32 register - * entries. - */ - cpregid |= 1 << CP_REG_NS_SHIFT; - } - return cpregid; -} - -/* Convert a truncated 32 bit hashtable key into the full - * 64 bit KVM register ID. - */ -static inline uint64_t cpreg_to_kvm_id(uint32_t cpregid) -{ - uint64_t kvmid; - - if (cpregid & CP_REG_AA64_MASK) { - kvmid = cpregid & ~CP_REG_AA64_MASK; - kvmid |= CP_REG_SIZE_U64 | CP_REG_ARM64; - } else { - kvmid = cpregid & ~(1 << 15); - if (cpregid & (1 << 15)) { - kvmid |= CP_REG_SIZE_U64 | CP_REG_ARM; - } else { - kvmid |= CP_REG_SIZE_U32 | CP_REG_ARM; - } - } - return kvmid; -} - /* Return the highest implemented Exception Level */ static inline int arm_highest_el(CPUARMState *env) { -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> If a test was tagged with the "accel" tag and the specified accelerator it not present in the qemu binary, cancel the test. We can now write tests without explicit calls to require_accelerator, just the tag is enough. Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/avocado/avocado_qemu/__init__.py | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/tests/avocado/avocado_qemu/__init__.py b/tests/avocado/avocado_qemu/__init__.py index XXXXXXX..XXXXXXX 100644 --- a/tests/avocado/avocado_qemu/__init__.py +++ b/tests/avocado/avocado_qemu/__init__.py @@ -XXX,XX +XXX,XX @@ def setUp(self): super().setUp('qemu-system-') + accel_required = self._get_unique_tag_val('accel') + if accel_required: + self.require_accelerator(accel_required) + self.machine = self.params.get('machine', default=self._get_unique_tag_val('machine')) -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> This allows the test to be skipped when TCG is not present in the QEMU binary. Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/avocado/boot_linux_console.py | 1 + tests/avocado/reverse_debugging.py | 8 ++++++++ 2 files changed, 9 insertions(+) diff --git a/tests/avocado/boot_linux_console.py b/tests/avocado/boot_linux_console.py index XXXXXXX..XXXXXXX 100644 --- a/tests/avocado/boot_linux_console.py +++ b/tests/avocado/boot_linux_console.py @@ -XXX,XX +XXX,XX @@ def test_arm_orangepi_uboot_netbsd9(self): def test_aarch64_raspi3_atf(self): """ + :avocado: tags=accel:tcg :avocado: tags=arch:aarch64 :avocado: tags=machine:raspi3b :avocado: tags=cpu:cortex-a53 diff --git a/tests/avocado/reverse_debugging.py b/tests/avocado/reverse_debugging.py index XXXXXXX..XXXXXXX 100644 --- a/tests/avocado/reverse_debugging.py +++ b/tests/avocado/reverse_debugging.py @@ -XXX,XX +XXX,XX @@ def reverse_debugging(self, shift=7, args=None): vm.shutdown() class ReverseDebugging_X86_64(ReverseDebugging): + """ + :avocado: tags=accel:tcg + """ + REG_PC = 0x10 REG_CS = 0x12 def get_pc(self, g): @@ -XXX,XX +XXX,XX @@ def test_x86_64_pc(self): self.reverse_debugging() class ReverseDebugging_AArch64(ReverseDebugging): + """ + :avocado: tags=accel:tcg + """ + REG_PC = 32 # unidentified gitlab timeout problem -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> Now that the cortex-a15 is under CONFIG_TCG, use as default CPU for a KVM-only build the 'max' cpu. Note that we cannot use 'host' here because the qtests can run without any other accelerator (than qtest) and 'host' depends on KVM being enabled. Signed-off-by: Fabiano Rosas <farosas@suse.de> Acked-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_machine_class_init(ObjectClass *oc, void *data) mc->minimum_page_bits = 12; mc->possible_cpu_arch_ids = virt_possible_cpu_arch_ids; mc->cpu_index_to_instance_props = virt_cpu_index_to_props; +#ifdef CONFIG_TCG mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a15"); +#else + mc->default_cpu_type = ARM_CPU_TYPE_NAME("max"); +#endif mc->get_default_cpu_node_id = virt_get_default_cpu_node_id; mc->kvm_type = virt_kvm_type; assert(!mc->get_hotplug_handler); -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/arm-cpu-features.c | 28 ++++++++++++++++++---------- 1 file changed, 18 insertions(+), 10 deletions(-) diff --git a/tests/qtest/arm-cpu-features.c b/tests/qtest/arm-cpu-features.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/arm-cpu-features.c +++ b/tests/qtest/arm-cpu-features.c @@ -XXX,XX +XXX,XX @@ #define SVE_MAX_VQ 16 #define MACHINE "-machine virt,gic-version=max -accel tcg " -#define MACHINE_KVM "-machine virt,gic-version=max -accel kvm -accel tcg " +#define MACHINE_KVM "-machine virt,gic-version=max -accel kvm " #define QUERY_HEAD "{ 'execute': 'query-cpu-model-expansion', " \ " 'arguments': { 'type': 'full', " #define QUERY_TAIL "}}" @@ -XXX,XX +XXX,XX @@ int main(int argc, char **argv) { g_test_init(&argc, &argv, NULL); - qtest_add_data_func("/arm/query-cpu-model-expansion", - NULL, test_query_cpu_model_expansion); + if (qtest_has_accel("tcg")) { + qtest_add_data_func("/arm/query-cpu-model-expansion", + NULL, test_query_cpu_model_expansion); + } + + if (!g_str_equal(qtest_get_arch(), "aarch64")) { + goto out; + } /* * For now we only run KVM specific tests with AArch64 QEMU in * order avoid attempting to run an AArch32 QEMU with KVM on * AArch64 hosts. That won't work and isn't easy to detect. */ - if (g_str_equal(qtest_get_arch(), "aarch64") && qtest_has_accel("kvm")) { + if (qtest_has_accel("kvm")) { /* * This tests target the 'host' CPU type, so register it only if * KVM is available. */ qtest_add_data_func("/arm/kvm/query-cpu-model-expansion", NULL, test_query_cpu_model_expansion_kvm); - } - if (g_str_equal(qtest_get_arch(), "aarch64")) { - qtest_add_data_func("/arm/max/query-cpu-model-expansion/sve-max-vq-8", - NULL, sve_tests_sve_max_vq_8); - qtest_add_data_func("/arm/max/query-cpu-model-expansion/sve-off", - NULL, sve_tests_sve_off); qtest_add_data_func("/arm/kvm/query-cpu-model-expansion/sve-off", NULL, sve_tests_sve_off_kvm); } + if (qtest_has_accel("tcg")) { + qtest_add_data_func("/arm/max/query-cpu-model-expansion/sve-max-vq-8", + NULL, sve_tests_sve_max_vq_8); + qtest_add_data_func("/arm/max/query-cpu-model-expansion/sve-off", + NULL, sve_tests_sve_off); + } + +out: return g_test_run(); } -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> These tests set -accel tcg, so restrict them to when TCG is present. Signed-off-by: Fabiano Rosas <farosas@suse.de> Acked-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/meson.build | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_arm = \ # TODO: once aarch64 TCG is fixed on ARM 32 bit host, make bios-tables-test unconditional qtests_aarch64 = \ (cpu != 'arm' and unpack_edk2_blobs ? ['bios-tables-test'] : []) + \ - (config_all_devices.has_key('CONFIG_TPM_TIS_SYSBUS') ? ['tpm-tis-device-test'] : []) + \ - (config_all_devices.has_key('CONFIG_TPM_TIS_SYSBUS') ? ['tpm-tis-device-swtpm-test'] : []) + \ + (config_all.has_key('CONFIG_TCG') and config_all_devices.has_key('CONFIG_TPM_TIS_SYSBUS') ? \ + ['tpm-tis-device-test', 'tpm-tis-device-swtpm-test'] : []) + \ (config_all_devices.has_key('CONFIG_XLNX_ZYNQMP_ARM') ? ['xlnx-can-test', 'fuzz-xlnx-dp-test'] : []) + \ (config_all_devices.has_key('CONFIG_RASPI') ? ['bcm2835-dma-test'] : []) + \ ['arm-cpu-features', -- 2.34.1 Hi; here's another arm pullreq; main parts here are the new i.MX 8MM EVK board, and a lot of refactoring. thanks -- PMM The following changes since commit aa15257174da180c6a8a9d58f87319cfe61c5520: Merge tag 'pbouvier/pr/plugins-20260424' of https://gitlab.com/p-b-o/qemu into staging (2026-04-25 10:22:04 -0400) are available in the Git repository at: https://gitlab.com/pm215/qemu.git tags/pull-target-arm-20260427 for you to fetch changes up to 4575da5ecb7a27544aa6da1f78e700e8100ceaea: target/arm: report register in WFIT syndromes (2026-04-27 11:46:34 +0100) ---------------------------------------------------------------- target-arm queue: docs/system: add FEAT_AA32 and FEAT_AA64 to emulation list hw/arm: Add the i.MX 8MM EVK(Evaluation Kit) board target/arm: Build M-profile helper code once only hw/arm: Remove hw_error() for the unimplemented CM_LMBUSCNT register hw: Move ARM_SYSCTL_GPIO definitions to arm sysctl specific header target/arm: Allow 'aarch64=off' to be set for TCG CPUs target/arm: Allow some sysregs to not have to be an exact match for migration hw/arm/raspi4b: NOP all DTB nodes when removing unimplemented devices hw/arm/fsl-imx6ul: Implement LCDIF display device target/arm: Refactor syndrome value code to use registerfields target/arm: Report the register in WFxT syndromes ---------------------------------------------------------------- Alex Bennée (24): docs/system: add FEAT_AA32 and FEAT_AA64 to emulation list target/arm: migrate basic syndrome helpers to registerfields target/arm: migrate system/cp trap syndromes to registerfields target/arm: migrate FP/SIMD trap syndromes to registerfields target/arm: migrate eret trap syndromes to registerfields target/arm: migrate SME trap syndromes to registerfields target/arm: migrate PAC trap syndromes to registerfields target/arm: migrate BTI trap syndromes to registerfields target/arm: migrate BXJ trap syndromes to registerfields target/arm: migrate Granule Protection traps to registerfields target/arm: migrate fault syndromes to registerfields target/arm: migrate debug syndromes to registerfields target/arm: migrate wfx syndromes to registerfields target/arm: migrate gcs syndromes to registerfields target/arm: migrate memory op syndromes to registerfields target/arm: migrate check_hcr_el2_trap to use syndrome helper target/arm: use syndrome helpers in arm_cpu_do_interrupt_aarch32_hyp target/arm: use syndrome helpers to set SAME_EL EC bit target/arm: make whpx use syndrome helpers for decode target/arm: make hvf use syndrome helpers for decode target/arm: use syndrome helpers in merge_syn_data_abort target/arm: use syndrome helpers to query VNCR bit target/arm: remove old syndrome defines target/arm: report register in WFIT syndromes Eric Auger (7): target/arm/cpu: Introduce the infrastructure for cpreg migration tolerances target/arm/machine: Handle ToleranceNotOnBothEnds migration tolerances target/arm/machine: Handle ToleranceOnlySrcTestValue migration tolerance target/arm/cpu64: Mitigate migration failures due to spurious TCR_EL1, PIRE0_EL1 and PIR_EL1 target/arm/cpu64: Define cpreg migration tolerance for KVM_REG_ARM_VENDOR_HYP_BMAP_2 target/arm/helper: Define cpreg migration tolerance for DGBDTR_EL0 Revert "target/arm: Reinstate bogus AArch32 DBGDTRTX register for migration compat" Gaurav Sharma (15): hw/arm: Add the i.MX 8MM EVK(Evaluation Kit) board hw/misc/imx8mp_analog: Add property to analog device hw/arm/fsl-imx8mm: Add Analog device IP to iMX8MM SOC hw/arm/fsl-imx8mm: Add Clock Control Module IP to iMX8MM hw/arm/fsl-imx8mm: Implemented support for SNVS hw/arm/fsl-imx8mm: Adding support for USDHC storage controllers hw/arm/fsl-imx8mm: Add PCIe support hw/arm/fsl-imx8mm: Add GPIO controllers hw/arm/fsl-imx8mm: Adding support for I2C emulation hw/arm/fsl-imx8mm: Adding support for SPI controller hw/arm/fsl-imx8mm: Adding support for Watchdog Timers hw/arm/fsl-imx8mm: Adding support for General Purpose Timers hw/arm/fsl-imx8mm: Adding support for ENET ethernet controller hw/arm/fsl-imx8mm: Adding support for USB controller hw/arm/fsl-imx8mm: Adding functional testing of iMX8MM emulation Osama Abdelkader (1): hw/arm/raspi4b: NOP all DTB nodes when removing unimplemented devices Peter Maydell (4): hw: Move ARM_SYSCTL_GPIO definitions to arm sysctl specific header target/arm: Clear AArch64 ID regs from ARMISARegisters if AArch64 disabled target/arm: Allow 'aarch64=off' to be set for TCG CPUs tests/functional/aarch64: Add basic test of TCG aarch64=off Philippe Mathieu-Daudé (9): target/arm: Ignore endianness when setting MTE tags target/arm: Explode MO_TExx -> MO_TE | MO_xx target/arm: Hoist MO_TE into mve_advance_vpt() target/arm: Hoist MO_TE into MVE DO_VSTR() macro target/arm: Introduce mo_endian() helper target/arm: Replace MO_TE -> mo_endian() for MVE helpers target/arm: Compile mve_helper.c once target/arm: Replace MO_TE -> mo_endian() for Cortex-M helpers target/arm: Compile m_helper.c once Thomas Huth (1): hw/arm: Remove hw_error() for the unimplemented CM_LMBUSCNT register Yucai Liu (2): hw/display: Add i.MX6UL LCDIF device model hw/arm/fsl-imx6ul: Wire in the LCDIF device model MAINTAINERS | 16 +- docs/system/arm/cpu-features.rst | 10 +- docs/system/arm/emulation.rst | 2 + docs/system/arm/{imx8mp-evk.rst => imx8m.rst} | 49 +- docs/system/target-arm.rst | 2 +- hw/arm/Kconfig | 25 + hw/arm/fsl-imx6ul.c | 12 +- hw/arm/fsl-imx8mm.c | 704 ++++++++++++++++++++++ hw/arm/imx8mm-evk.c | 130 ++++ hw/arm/integratorcp.c | 3 - hw/arm/meson.build | 2 + hw/arm/raspi4b.c | 10 +- hw/arm/realview.c | 2 +- hw/arm/vexpress.c | 2 +- hw/arm/virt.c | 1 - hw/display/Kconfig | 4 + hw/display/imx6ul_lcdif.c | 453 ++++++++++++++ hw/display/meson.build | 1 + hw/misc/arm_sysctl.c | 2 +- hw/misc/imx8mp_analog.c | 12 +- hw/timer/imx_gpt.c | 26 + hw/vmapple/vmapple.c | 1 - include/hw/arm/fsl-imx6ul.h | 4 +- include/hw/arm/fsl-imx8mm.h | 242 ++++++++ include/hw/arm/primecell.h | 12 - include/hw/display/imx6ul_lcdif.h | 37 ++ include/hw/misc/arm_sysctl.h | 16 + include/hw/misc/imx8mp_analog.h | 3 + include/hw/timer/imx_gpt.h | 2 + target/arm/cpu-features.h | 5 + target/arm/cpu.c | 153 ++++- target/arm/cpu.h | 4 +- target/arm/cpu64.c | 39 ++ target/arm/debug_helper.c | 29 - target/arm/helper.c | 27 +- target/arm/hvf/hvf.c | 14 +- target/arm/internals.h | 60 ++ target/arm/machine.c | 33 +- target/arm/syndrome.h | 595 ++++++++++++++---- target/arm/tcg/debug.c | 2 +- target/arm/tcg/helper-a64.c | 2 +- target/arm/tcg/helper-defs.h | 2 +- target/arm/tcg/m_helper.c | 8 +- target/arm/tcg/meson.build | 6 +- target/arm/tcg/mve_helper.c | 102 ++-- target/arm/tcg/op_helper.c | 7 +- target/arm/tcg/tlb_helper.c | 6 +- target/arm/tcg/translate-a64.c | 2 +- target/arm/tcg/vfp_helper.c | 5 +- target/arm/trace-events | 2 + target/arm/whpx/whpx-all.c | 13 +- tests/functional/aarch64/meson.build | 3 + tests/functional/aarch64/test_imx8mm_evk.py | 69 +++ tests/functional/aarch64/test_virt_aarch64_off.py | 37 ++ tests/qtest/arm-cpu-features.c | 8 +- 55 files changed, 2743 insertions(+), 275 deletions(-) rename docs/system/arm/{imx8mp-evk.rst => imx8m.rst} (58%) create mode 100644 hw/arm/fsl-imx8mm.c create mode 100644 hw/arm/imx8mm-evk.c create mode 100644 hw/display/imx6ul_lcdif.c create mode 100644 include/hw/arm/fsl-imx8mm.h delete mode 100644 include/hw/arm/primecell.h create mode 100644 include/hw/display/imx6ul_lcdif.h create mode 100644 include/hw/misc/arm_sysctl.h create mode 100755 tests/functional/aarch64/test_imx8mm_evk.py create mode 100755 tests/functional/aarch64/test_virt_aarch64_off.py From: Alex Bennée <alex.bennee@linaro.org> This is just a documentation tweak as we already support both. FEAT_AA32 implies FEAT_AA32EL0. FEAT_AA64 implies FEAT_AA64EL[0123]. This is however useful if you are using emulation.rst as a source of truth of what QEMU emulates and when cross checking with Features.json from Arm. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260421093506.616307-1-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 2 ++ 1 file changed, 2 insertions(+) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ QEMU's TCG emulation includes support for the Armv5, Armv6, Armv7, Armv8 and Armv9 versions of the A-profile architecture. It also has support for the following architecture extensions: +- FEAT_AA32 (PE Support for AArch32) - FEAT_AA32BF16 (AArch32 BFloat16 instructions) - FEAT_AA32EL0 (Support for AArch32 at EL0) - FEAT_AA32EL1 (Support for AArch32 at EL1) @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_AA32EL3 (Support for AArch32 at EL3) - FEAT_AA32HPD (AArch32 hierarchical permission disables) - FEAT_AA32I8MM (AArch32 Int8 matrix multiplication instructions) +- FEAT_AA64 (PE uses AArch64 after last reboot) - FEAT_AA64EL0 (Support for AArch64 at EL0) - FEAT_AA64EL1 (Support for AArch64 at EL1) - FEAT_AA64EL2 (Support for AArch64 at EL2) -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> Implemented CPUs, RAM, UARTs and Interrupt Controller Other peripherals are represented as TYPE_UNIMPLEMENTED_DEVICE Complete memory map of the SoC is provided. Set default RAM size to 2GB and default CPU count to 4 to match the real i.MX8MM EVK hardware configuration. Documentation is shared with imx8mp-evk to avoid duplication. Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> [PMM: fixed over-long lines in doc] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 11 +- docs/system/arm/{imx8mp-evk.rst => imx8m.rst} | 49 ++- docs/system/target-arm.rst | 2 +- hw/arm/Kconfig | 12 + hw/arm/fsl-imx8mm.c | 377 ++++++++++++++++++ hw/arm/imx8mm-evk.c | 112 ++++++ hw/arm/meson.build | 2 + include/hw/arm/fsl-imx8mm.h | 158 ++++++++ 8 files changed, 709 insertions(+), 14 deletions(-) rename docs/system/arm/{imx8mp-evk.rst => imx8m.rst} (58%) create mode 100644 hw/arm/fsl-imx8mm.c create mode 100644 hw/arm/imx8mm-evk.c create mode 100644 include/hw/arm/fsl-imx8mm.h diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/pci-host/designware.c F: include/hw/pci-host/designware.h F: docs/system/arm/mcimx7d-sabre.rst +MCIMX8MM-EVK / iMX8MM +M: Gaurav Sharma <gaurav.sharma_7@nxp.com> +L: qemu-arm@nongnu.org +S: Maintained +F: hw/arm/fsl-imx8mm.c +F: hw/arm/imx8mm-evk.c +F: include/hw/arm/fsl-imx8mm.h +F: docs/system/arm/imx8m.rst + MCIMX8MP-EVK / i.MX8MP M: Bernhard Beschow <shentey@gmail.com> L: qemu-arm@nongnu.org @@ -XXX,XX +XXX,XX @@ F: hw/rtc/rs5c372.c F: include/hw/arm/fsl-imx8mp.h F: include/hw/misc/imx8mp_*.h F: include/hw/pci-host/fsl_imx8m_phy.h -F: docs/system/arm/imx8mp-evk.rst +F: docs/system/arm/imx8m.rst F: tests/functional/aarch64/test_imx8mp_evk.py F: tests/qtest/rs5c372-test.c diff --git a/docs/system/arm/imx8mp-evk.rst b/docs/system/arm/imx8m.rst similarity index 58% rename from docs/system/arm/imx8mp-evk.rst rename to docs/system/arm/imx8m.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/imx8mp-evk.rst +++ b/docs/system/arm/imx8m.rst @@ -XXX,XX +XXX,XX @@ -NXP i.MX 8M Plus Evaluation Kit (``imx8mp-evk``) -================================================ +NXP i.MX 8M Plus and i.MX 8M Mini Evaluation Kits (``imx8mp-evk``, ``imx8mm-evk``) +================================================================================== -The ``imx8mp-evk`` machine models the i.MX 8M Plus Evaluation Kit, based on an -i.MX 8M Plus SoC. +The ``imx8mp-evk`` and ``imx8mm-evk`` machine models the i.MX 8M Plus +and i.MX 8M Mini Evaluation Kits, based on i.MX 8M Plus and i.MX8M +Mini SoCs. Supported devices ----------------- -The ``imx8mp-evk`` machine implements the following devices: +The ``imx8mp-evk`` and ``imx8mm-evk`` machines implement the +following devices: * Up to 4 Cortex-A53 cores * Generic Interrupt Controller (GICv3) @@ -XXX,XX +XXX,XX @@ The ``imx8mp-evk`` machine implements the following devices: Boot options ------------ -The ``imx8mp-evk`` machine can start a Linux kernel directly using the standard -``-kernel`` functionality. +The ``imx8mp-evk`` and ``imx8mm-evk`` machines can start a Linux +kernel directly using the standard ``-kernel`` functionality. Direct Linux Kernel Boot '''''''''''''''''''''''' @@ -XXX,XX +XXX,XX @@ is to generate an image with Buildroot. Version 2024.11.1 is tested at the time of writing and involves two steps. First run the following commands in the toplevel directory of the Buildroot source tree: +For i.MX 8M Plus EVK: + .. code-block:: bash $ make freescale_imx8mpevk_defconfig $ make +For i.MX 8M Mini EVK: + +.. code-block:: bash + + $ make freescale_imx8mmevk_defconfig + $ make + Once finished successfully there is an ``output/image`` subfolder. Navigate into it and resize the SD card image to a power of two: @@ -XXX,XX +XXX,XX @@ it and resize the SD card image to a power of two: Now that everything is prepared the machine can be started as follows: +For i.MX 8M Plus EVK: + .. code-block:: bash $ qemu-system-aarch64 -M imx8mp-evk \ @@ -XXX,XX +XXX,XX @@ Now that everything is prepared the machine can be started as follows: -append "root=/dev/mmcblk2p2" \ -drive file=sdcard.img,if=sd,bus=2,format=raw,id=mmcblk2 +For i.MX 8M Mini EVK: + +.. code-block:: bash + + $ qemu-system-aarch64 -M imx8mm-evk -smp 4 -m 2G \ + -display none -serial null -serial stdio \ + -kernel Image \ + -dtb imx8mm-evk.dtb \ + -append "root=/dev/mmcblk2p2" \ + -drive file=sdcard.img,if=sd,bus=2,format=raw,id=mmcblk2 KVM Acceleration ---------------- @@ -XXX,XX +XXX,XX @@ To enable hardware-assisted acceleration via KVM, append ``-accel kvm`` to the command line. While this speeds up performance significantly, be aware of the following limitations: -* The ``imx8mp-evk`` machine is not included under the "virtualization use case" - of :doc:`QEMU's security policy </system/security>`. This means that you - should not trust that it can contain malicious guests, whether it is run - using TCG or KVM. If you don't trust your guests and you're relying on QEMU to - be the security boundary, you want to choose another machine such as ``virt``. +* The ``imx8mp-evk`` and ``imx8mm-evk`` machines are not included + under the "virtualization use case" of :doc:`QEMU's security + policy </system/security>`. This means that you should not trust that + it can contain malicious guests, whether it is run using TCG or KVM. + If you don't trust your guests and you're relying on QEMU to be the + security boundary, you want to choose another machine such as + ``virt``. * Rather than Cortex-A53 CPUs, the same CPU type as the host's will be used. This is a limitation of KVM and may not work with guests with a tight dependency on Cortex-A53. diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/target-arm.rst +++ b/docs/system/target-arm.rst @@ -XXX,XX +XXX,XX @@ Board-specific documentation arm/imx25-pdk arm/mcimx6ul-evk arm/mcimx7d-sabre - arm/imx8mp-evk + arm/imx8m arm/orangepi arm/raspi arm/collie diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MP_EVK depends on TCG select FSL_IMX8MP +config FSL_IMX8MM + bool + select ARM_GIC + select IMX + +config FSL_IMX8MM_EVK + bool + default y + depends on AARCH64 + depends on TCG + select FSL_IMX8MM + config ARM_SMMUV3_ACCEL bool depends on ARM_SMMUV3 diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ +/* + * i.MX 8MM SoC Implementation + * + * Based on hw/arm/fsl-imx6.c + * + * Copyright (c) 2025, NXP Semiconductors + * Author: Gaurav Sharma <gaurav.sharma_7@nxp.com> + * + * SPDX-License-Identifier: GPL-2.0-or-later + * + * iMX8MM Reference Manual - https://www.nxp.com/products/i.MX8MMINI -> Documentation + */ + +#include "qemu/osdep.h" +#include "system/address-spaces.h" +#include "hw/arm/bsa.h" +#include "hw/arm/fsl-imx8mm.h" +#include "hw/misc/unimp.h" +#include "hw/core/boards.h" +#include "system/kvm.h" +#include "system/system.h" +#include "target/arm/cpu.h" +#include "target/arm/cpu-qom.h" +#include "target/arm/kvm_arm.h" +#include "qapi/error.h" +#include "qobject/qlist.h" + +static const struct { + hwaddr addr; + size_t size; + const char *name; +} fsl_imx8mm_memmap[] = { + [FSL_IMX8MM_RAM] = { FSL_IMX8MM_RAM_START, FSL_IMX8MM_RAM_SIZE_MAX, "ram" }, + [FSL_IMX8MM_DDR_PHY_BROADCAST] = { 0x3dc00000, 4 * MiB, "ddr_phy_broadcast" }, + [FSL_IMX8MM_DDR_PERF_MON] = { 0x3d800000, 4 * MiB, "ddr_perf_mon" }, + [FSL_IMX8MM_DDR_CTL] = { 0x3d400000, 4 * MiB, "ddr_ctl" }, + [FSL_IMX8MM_DDR_PHY] = { 0x3c000000, 16 * MiB, "ddr_phy" }, + [FSL_IMX8MM_GIC_DIST] = { 0x38800000, 512 * KiB, "gic_dist" }, + [FSL_IMX8MM_GIC_REDIST] = { 0x38880000, 512 * KiB, "gic_redist" }, + [FSL_IMX8MM_VPU] = { 0x38340000, 2 * MiB, "vpu" }, + [FSL_IMX8MM_VPU_BLK_CTRL] = { 0x38330000, 2 * MiB, "vpu_blk_ctrl" }, + [FSL_IMX8MM_VPU_G2_DECODER] = { 0x38310000, 1 * MiB, "vpu_g2_decoder" }, + [FSL_IMX8MM_VPU_G1_DECODER] = { 0x38300000, 1 * MiB, "vpu_g1_decoder" }, + [FSL_IMX8MM_USB2_OTG] = { 0x32e50200, 0x200, "usb2_otg" }, + [FSL_IMX8MM_USB2] = { 0x32e50000, 0x200, "usb2" }, + [FSL_IMX8MM_USB1_OTG] = { 0x32e40200, 0x200, "usb1_otg" }, + [FSL_IMX8MM_USB1] = { 0x32e40000, 0x200, "usb1" }, + [FSL_IMX8MM_GPU2D] = { 0x38000000, 64 * KiB, "gpu2d" }, + [FSL_IMX8MM_QSPI1_RX_BUFFER] = { 0x34000000, 32 * MiB, "qspi1_rx_buffer" }, + [FSL_IMX8MM_PCIE1] = { 0x33800000, 4 * MiB, "pcie1" }, + [FSL_IMX8MM_QSPI1_TX_BUFFER] = { 0x33008000, 32 * KiB, "qspi1_tx_buffer" }, + [FSL_IMX8MM_APBH_DMA] = { 0x33000000, 32 * KiB, "apbh_dma" }, + + /* AIPS-4 Begin */ + [FSL_IMX8MM_TZASC] = { 0x32f80000, 64 * KiB, "tzasc" }, + [FSL_IMX8MM_PCIE_PHY1] = { 0x32f00000, 64 * KiB, "pcie_phy1" }, + [FSL_IMX8MM_MEDIA_BLK_CTL] = { 0x32e28000, 256, "media_blk_ctl" }, + [FSL_IMX8MM_LCDIF] = { 0x32e00000, 64 * KiB, "lcdif" }, + [FSL_IMX8MM_MIPI_DSI] = { 0x32e10000, 64 * KiB, "mipi_dsi" }, + [FSL_IMX8MM_MIPI_CSI] = { 0x32e30000, 64 * KiB, "mipi_csi" }, + [FSL_IMX8MM_AIPS4_CONFIGURATION] = { 0x32df0000, 64 * KiB, "aips4_configuration" }, + /* AIPS-4 End */ + + [FSL_IMX8MM_INTERCONNECT] = { 0x32700000, 1 * MiB, "interconnect" }, + + /* AIPS-3 Begin */ + [FSL_IMX8MM_ENET1] = { 0x30be0000, 64 * KiB, "enet1" }, + [FSL_IMX8MM_SDMA1] = { 0x30bd0000, 64 * KiB, "sdma1" }, + [FSL_IMX8MM_QSPI] = { 0x30bb0000, 64 * KiB, "qspi" }, + [FSL_IMX8MM_USDHC3] = { 0x30b60000, 64 * KiB, "usdhc3" }, + [FSL_IMX8MM_USDHC2] = { 0x30b50000, 64 * KiB, "usdhc2" }, + [FSL_IMX8MM_USDHC1] = { 0x30b40000, 64 * KiB, "usdhc1" }, + [FSL_IMX8MM_SEMAPHORE_HS] = { 0x30ac0000, 64 * KiB, "semaphore_hs" }, + [FSL_IMX8MM_MU_B] = { 0x30ab0000, 64 * KiB, "mu_b" }, + [FSL_IMX8MM_MU_A] = { 0x30aa0000, 64 * KiB, "mu_a" }, + [FSL_IMX8MM_UART4] = { 0x30a60000, 64 * KiB, "uart4" }, + [FSL_IMX8MM_I2C4] = { 0x30a50000, 64 * KiB, "i2c4" }, + [FSL_IMX8MM_I2C3] = { 0x30a40000, 64 * KiB, "i2c3" }, + [FSL_IMX8MM_I2C2] = { 0x30a30000, 64 * KiB, "i2c2" }, + [FSL_IMX8MM_I2C1] = { 0x30a20000, 64 * KiB, "i2c1" }, + [FSL_IMX8MM_AIPS3_CONFIGURATION] = { 0x309f0000, 64 * KiB, "aips3_configuration" }, + [FSL_IMX8MM_CAAM] = { 0x30900000, 256 * KiB, "caam" }, + [FSL_IMX8MM_SPBA1] = { 0x308f0000, 64 * KiB, "spba1" }, + [FSL_IMX8MM_UART2] = { 0x30890000, 64 * KiB, "uart2" }, + [FSL_IMX8MM_UART3] = { 0x30880000, 64 * KiB, "uart3" }, + [FSL_IMX8MM_UART1] = { 0x30860000, 64 * KiB, "uart1" }, + [FSL_IMX8MM_ECSPI3] = { 0x30840000, 64 * KiB, "ecspi3" }, + [FSL_IMX8MM_ECSPI2] = { 0x30830000, 64 * KiB, "ecspi2" }, + [FSL_IMX8MM_ECSPI1] = { 0x30820000, 64 * KiB, "ecspi1" }, + /* AIPS-3 End */ + + /* AIPS-2 Begin */ + [FSL_IMX8MM_QOSC] = { 0x307f0000, 64 * KiB, "qosc" }, + [FSL_IMX8MM_PERFMON2] = { 0x307d0000, 64 * KiB, "perfmon2" }, + [FSL_IMX8MM_PERFMON1] = { 0x307c0000, 64 * KiB, "perfmon1" }, + [FSL_IMX8MM_GPT4] = { 0x30700000, 64 * KiB, "gpt4" }, + [FSL_IMX8MM_GPT5] = { 0x306f0000, 64 * KiB, "gpt5" }, + [FSL_IMX8MM_GPT6] = { 0x306e0000, 64 * KiB, "gpt6" }, + [FSL_IMX8MM_SYSCNT_CTRL] = { 0x306c0000, 64 * KiB, "syscnt_ctrl" }, + [FSL_IMX8MM_SYSCNT_CMP] = { 0x306b0000, 64 * KiB, "syscnt_cmp" }, + [FSL_IMX8MM_SYSCNT_RD] = { 0x306a0000, 64 * KiB, "syscnt_rd" }, + [FSL_IMX8MM_PWM4] = { 0x30690000, 64 * KiB, "pwm4" }, + [FSL_IMX8MM_PWM3] = { 0x30680000, 64 * KiB, "pwm3" }, + [FSL_IMX8MM_PWM2] = { 0x30670000, 64 * KiB, "pwm2" }, + [FSL_IMX8MM_PWM1] = { 0x30660000, 64 * KiB, "pwm1" }, + [FSL_IMX8MM_AIPS2_CONFIGURATION] = { 0x305f0000, 64 * KiB, "aips2_configuration" }, + /* AIPS-2 End */ + + /* AIPS-1 Begin */ + [FSL_IMX8MM_CSU] = { 0x303e0000, 64 * KiB, "csu" }, + [FSL_IMX8MM_RDC] = { 0x303d0000, 64 * KiB, "rdc" }, + [FSL_IMX8MM_SEMAPHORE2] = { 0x303c0000, 64 * KiB, "semaphore2" }, + [FSL_IMX8MM_SEMAPHORE1] = { 0x303b0000, 64 * KiB, "semaphore1" }, + [FSL_IMX8MM_GPC] = { 0x303a0000, 64 * KiB, "gpc" }, + [FSL_IMX8MM_SRC] = { 0x30390000, 64 * KiB, "src" }, + [FSL_IMX8MM_CCM] = { 0x30380000, 64 * KiB, "ccm" }, + [FSL_IMX8MM_SNVS_HP] = { 0x30370000, 64 * KiB, "snvs_hp" }, + [FSL_IMX8MM_ANA_PLL] = { 0x30360000, 64 * KiB, "ana_pll" }, + [FSL_IMX8MM_OCOTP_CTRL] = { 0x30350000, 64 * KiB, "ocotp_ctrl" }, + [FSL_IMX8MM_IOMUXC_GPR] = { 0x30340000, 64 * KiB, "iomuxc_gpr" }, + [FSL_IMX8MM_IOMUXC] = { 0x30330000, 64 * KiB, "iomuxc" }, + [FSL_IMX8MM_GPT3] = { 0x302f0000, 64 * KiB, "gpt3" }, + [FSL_IMX8MM_GPT2] = { 0x302e0000, 64 * KiB, "gpt2" }, + [FSL_IMX8MM_GPT1] = { 0x302d0000, 64 * KiB, "gpt1" }, + [FSL_IMX8MM_SDMA2] = { 0x302c0000, 64 * KiB, "sdma2" }, + [FSL_IMX8MM_SDMA3] = { 0x302b0000, 64 * KiB, "sdma3" }, + [FSL_IMX8MM_WDOG3] = { 0x302a0000, 64 * KiB, "wdog3" }, + [FSL_IMX8MM_WDOG2] = { 0x30290000, 64 * KiB, "wdog2" }, + [FSL_IMX8MM_WDOG1] = { 0x30280000, 64 * KiB, "wdog1" }, + [FSL_IMX8MM_ANA_OSC] = { 0x30270000, 64 * KiB, "ana_osc" }, + [FSL_IMX8MM_ANA_TSENSOR] = { 0x30260000, 64 * KiB, "ana_tsensor" }, + [FSL_IMX8MM_GPIO5] = { 0x30240000, 64 * KiB, "gpio5" }, + [FSL_IMX8MM_GPIO4] = { 0x30230000, 64 * KiB, "gpio4" }, + [FSL_IMX8MM_GPIO3] = { 0x30220000, 64 * KiB, "gpio3" }, + [FSL_IMX8MM_GPIO2] = { 0x30210000, 64 * KiB, "gpio2" }, + [FSL_IMX8MM_GPIO1] = { 0x30200000, 64 * KiB, "gpio1" }, + [FSL_IMX8MM_AIPS1_CONFIGURATION] = { 0x301f0000, 64 * KiB, "aips1_configuration" }, + [FSL_IMX8MM_SAI6] = { 0x30060000, 64 * KiB, "sai6" }, + [FSL_IMX8MM_SAI5] = { 0x30050000, 64 * KiB, "sai5" }, + [FSL_IMX8MM_SAI3] = { 0x30030000, 64 * KiB, "sai3" }, + [FSL_IMX8MM_SAI2] = { 0x30020000, 64 * KiB, "sai2" }, + [FSL_IMX8MM_SAI1] = { 0x30010000, 64 * KiB, "sai1" }, + + /* AIPS-1 End */ + + [FSL_IMX8MM_A53_DAP] = { 0x28000000, 16 * MiB, "a53_dap" }, + [FSL_IMX8MM_PCIE1_MEM] = { 0x18000000, 128 * MiB, "pcie1_mem" }, + [FSL_IMX8MM_QSPI_MEM] = { 0x08000000, 256 * MiB, "qspi_mem" }, + [FSL_IMX8MM_OCRAM] = { 0x00900000, 256 * KiB, "ocram" }, + [FSL_IMX8MM_TCM_DTCM] = { 0x00800000, 128 * KiB, "tcm_dtcm" }, + [FSL_IMX8MM_TCM_ITCM] = { 0x007e0000, 128 * KiB, "tcm_itcm" }, + [FSL_IMX8MM_OCRAM_S] = { 0x00180000, 32 * KiB, "ocram_s" }, + [FSL_IMX8MM_CAAM_MEM] = { 0x00100000, 32 * KiB, "caam_mem" }, + [FSL_IMX8MM_BOOT_ROM_PROTECTED] = { 0x0003f000, 4 * KiB, "boot_rom_protected" }, + [FSL_IMX8MM_BOOT_ROM] = { 0x00000000, 252 * KiB, "boot_rom" }, +}; + +static void fsl_imx8mm_init(Object *obj) +{ + MachineState *ms = MACHINE(qdev_get_machine()); + FslImx8mmState *s = FSL_IMX8MM(obj); + const char *cpu_type = ms->cpu_type ?: ARM_CPU_TYPE_NAME("cortex-a53"); + int i; + + for (i = 0; i < MIN(ms->smp.cpus, FSL_IMX8MM_NUM_CPUS); i++) { + g_autofree char *name = g_strdup_printf("cpu%d", i); + object_initialize_child(obj, name, &s->cpu[i], cpu_type); + } + + object_initialize_child(obj, "gic", &s->gic, gicv3_class_name()); + + for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) { + g_autofree char *name = g_strdup_printf("uart%d", i + 1); + object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); + } + +} + +static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) +{ + MachineState *ms = MACHINE(qdev_get_machine()); + FslImx8mmState *s = FSL_IMX8MM(dev); + DeviceState *gicdev = DEVICE(&s->gic); + int i; + + if (ms->smp.cpus > FSL_IMX8MM_NUM_CPUS) { + error_setg(errp, "%s: Only %d CPUs are supported (%d requested)", + TYPE_FSL_IMX8MM, FSL_IMX8MM_NUM_CPUS, ms->smp.cpus); + return; + } + + /* CPUs */ + for (i = 0; i < ms->smp.cpus; i++) { + /* On uniprocessor, the CBAR is set to 0 */ + if (ms->smp.cpus > 1 && + object_property_find(OBJECT(&s->cpu[i]), "reset-cbar")) { + object_property_set_int(OBJECT(&s->cpu[i]), "reset-cbar", + fsl_imx8mm_memmap[FSL_IMX8MM_GIC_DIST].addr, + &error_abort); + } + + /* + * CNTFID0 base frequency in Hz of system counter + */ + object_property_set_int(OBJECT(&s->cpu[i]), "cntfrq", 8000000, + &error_abort); + + if (object_property_find(OBJECT(&s->cpu[i]), "has_el2")) { + object_property_set_bool(OBJECT(&s->cpu[i]), "has_el2", + !kvm_enabled(), &error_abort); + } + + if (object_property_find(OBJECT(&s->cpu[i]), "has_el3")) { + object_property_set_bool(OBJECT(&s->cpu[i]), "has_el3", + !kvm_enabled(), &error_abort); + } + + if (i) { + /* + * Secondary CPUs start in powered-down state (and can be + * powered up via the SRC system reset controller) + */ + object_property_set_bool(OBJECT(&s->cpu[i]), "start-powered-off", + true, &error_abort); + } + + if (!qdev_realize(DEVICE(&s->cpu[i]), NULL, errp)) { + return; + } + } + + /* GIC */ + { + SysBusDevice *gicsbd = SYS_BUS_DEVICE(&s->gic); + QList *redist_region_count; + bool pmu = object_property_get_bool(OBJECT(first_cpu), "pmu", NULL); + + qdev_prop_set_uint32(gicdev, "num-cpu", ms->smp.cpus); + qdev_prop_set_uint32(gicdev, "num-irq", + FSL_IMX8MM_NUM_IRQS + GIC_INTERNAL); + redist_region_count = qlist_new(); + qlist_append_int(redist_region_count, ms->smp.cpus); + qdev_prop_set_array(gicdev, "redist-region-count", redist_region_count); + object_property_set_link(OBJECT(&s->gic), "sysmem", + OBJECT(get_system_memory()), &error_fatal); + if (!sysbus_realize(gicsbd, errp)) { + return; + } + sysbus_mmio_map(gicsbd, 0, fsl_imx8mm_memmap[FSL_IMX8MM_GIC_DIST].addr); + sysbus_mmio_map(gicsbd, 1, fsl_imx8mm_memmap[FSL_IMX8MM_GIC_REDIST].addr); + + /* + * Wire the outputs from each CPU's generic timer and the GICv3 + * maintenance interrupt signal to the appropriate GIC PPI inputs, and + * the GIC's IRQ/FIQ interrupt outputs to the CPU's inputs. + */ + for (i = 0; i < ms->smp.cpus; i++) { + DeviceState *cpudev = DEVICE(&s->cpu[i]); + int intidbase = FSL_IMX8MM_NUM_IRQS + i * GIC_INTERNAL; + qemu_irq irq; + + /* + * Mapping from the output timer irq lines from the CPU to the + * GIC PPI inputs. + */ + static const int timer_irqs[] = { + [GTIMER_PHYS] = ARCH_TIMER_NS_EL1_IRQ, + [GTIMER_VIRT] = ARCH_TIMER_VIRT_IRQ, + [GTIMER_HYP] = ARCH_TIMER_NS_EL2_IRQ, + [GTIMER_SEC] = ARCH_TIMER_S_EL1_IRQ, + }; + + for (int j = 0; j < ARRAY_SIZE(timer_irqs); j++) { + irq = qdev_get_gpio_in(gicdev, intidbase + timer_irqs[j]); + qdev_connect_gpio_out(cpudev, j, irq); + } + + irq = qdev_get_gpio_in(gicdev, intidbase + ARCH_GIC_MAINT_IRQ); + qdev_connect_gpio_out_named(cpudev, "gicv3-maintenance-interrupt", + 0, irq); + + irq = qdev_get_gpio_in(gicdev, intidbase + VIRTUAL_PMU_IRQ); + qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0, irq); + + sysbus_connect_irq(gicsbd, i, + qdev_get_gpio_in(cpudev, ARM_CPU_IRQ)); + sysbus_connect_irq(gicsbd, i + ms->smp.cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_FIQ)); + sysbus_connect_irq(gicsbd, i + 2 * ms->smp.cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_VIRQ)); + sysbus_connect_irq(gicsbd, i + 3 * ms->smp.cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ)); + + if (kvm_enabled()) { + if (pmu) { + assert(arm_feature(&s->cpu[i].env, ARM_FEATURE_PMU)); + if (kvm_irqchip_in_kernel()) { + kvm_arm_pmu_set_irq(&s->cpu[i], VIRTUAL_PMU_IRQ); + } + kvm_arm_pmu_init(&s->cpu[i]); + } + } + } + } + + /* UARTs */ + for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) { + static const struct { + hwaddr addr; + unsigned int irq; + } serial_table[FSL_IMX8MM_NUM_UARTS] = { + { fsl_imx8mm_memmap[FSL_IMX8MM_UART1].addr, FSL_IMX8MM_UART1_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_UART2].addr, FSL_IMX8MM_UART2_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_UART3].addr, FSL_IMX8MM_UART3_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_UART4].addr, FSL_IMX8MM_UART4_IRQ }, + }; + + qdev_prop_set_chr(DEVICE(&s->uart[i]), "chardev", serial_hd(i)); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->uart[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->uart[i]), 0, serial_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->uart[i]), 0, + qdev_get_gpio_in(gicdev, serial_table[i].irq)); + } + + /* On-Chip RAM */ + if (!memory_region_init_ram(&s->ocram, OBJECT(dev), "imx8mm.ocram", + fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].size, + errp)) { + return; + } + memory_region_add_subregion(get_system_memory(), + fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr, + &s->ocram); + + /* Unimplemented devices */ + for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) { + switch (i) { + case FSL_IMX8MM_GIC_DIST: + case FSL_IMX8MM_GIC_REDIST: + case FSL_IMX8MM_RAM: + case FSL_IMX8MM_OCRAM: + case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4: + /* device implemented and treated above */ + break; + + default: + create_unimplemented_device(fsl_imx8mm_memmap[i].name, + fsl_imx8mm_memmap[i].addr, + fsl_imx8mm_memmap[i].size); + break; + } + } +} + +static void fsl_imx8mm_class_init(ObjectClass *oc, const void *data) +{ + DeviceClass *dc = DEVICE_CLASS(oc); + + dc->realize = fsl_imx8mm_realize; + + dc->desc = "i.MX 8MM SoC"; +} + +static const TypeInfo fsl_imx8mm_types[] = { + { + .name = TYPE_FSL_IMX8MM, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(FslImx8mmState), + .instance_init = fsl_imx8mm_init, + .class_init = fsl_imx8mm_class_init, + }, +}; + +DEFINE_TYPES(fsl_imx8mm_types) diff --git a/hw/arm/imx8mm-evk.c b/hw/arm/imx8mm-evk.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/imx8mm-evk.c @@ -XXX,XX +XXX,XX @@ +/* + * NXP i.MX 8MM Evaluation Kit System Emulation + * + * Copyright (c) 2025, NXP Semiconductors + * Author: Gaurav Sharma <gaurav.sharma_7@nxp.com> + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#include "qemu/osdep.h" +#include "system/address-spaces.h" +#include "hw/arm/boot.h" +#include "hw/arm/fsl-imx8mm.h" +#include "hw/arm/machines-qom.h" +#include "hw/core/boards.h" +#include "hw/core/qdev-properties.h" +#include "system/kvm.h" +#include "system/qtest.h" +#include "qemu/error-report.h" +#include "qapi/error.h" +#include <libfdt.h> + +static void imx8mm_evk_modify_dtb(const struct arm_boot_info *info, void *fdt) +{ + int i, offset; + + /* Temporarily disable following nodes until they are implemented */ + const char *nodes_to_remove[] = { + "nxp,imx8mm-fspi", + "fsl,imx8mm-mipi-csi", + "fsl,imx8mm-mipi-dsim" + }; + + for (i = 0; i < ARRAY_SIZE(nodes_to_remove); i++) { + const char *dev_str = nodes_to_remove[i]; + + offset = fdt_node_offset_by_compatible(fdt, -1, dev_str); + while (offset >= 0) { + fdt_nop_node(fdt, offset); + offset = fdt_node_offset_by_compatible(fdt, offset, dev_str); + } + } + + /* Remove cpu-idle-states property from CPU nodes */ + offset = fdt_node_offset_by_compatible(fdt, -1, "arm,cortex-a53"); + while (offset >= 0) { + fdt_nop_property(fdt, offset, "cpu-idle-states"); + offset = fdt_node_offset_by_compatible(fdt, offset, "arm,cortex-a53"); + } + + if (kvm_enabled()) { + /* Use system counter frequency from host CPU to fix time in guest */ + offset = fdt_node_offset_by_compatible(fdt, -1, "arm,armv8-timer"); + while (offset >= 0) { + fdt_nop_property(fdt, offset, "clock-frequency"); + offset = fdt_node_offset_by_compatible(fdt, offset, "arm,armv8-timer"); + } + } +} + +static void imx8mm_evk_init(MachineState *machine) +{ + static struct arm_boot_info boot_info; + FslImx8mmState *s; + + if (machine->ram_size > FSL_IMX8MM_RAM_SIZE_MAX) { + error_report("RAM size " RAM_ADDR_FMT " above max supported (%08" PRIx64 ")", + machine->ram_size, FSL_IMX8MM_RAM_SIZE_MAX); + exit(1); + } + + boot_info = (struct arm_boot_info) { + .loader_start = FSL_IMX8MM_RAM_START, + .board_id = -1, + .ram_size = machine->ram_size, + .psci_conduit = QEMU_PSCI_CONDUIT_SMC, + .modify_dtb = imx8mm_evk_modify_dtb, + }; + + s = FSL_IMX8MM(object_new_with_props(TYPE_FSL_IMX8MM, OBJECT(machine), + "soc", &error_fatal, NULL)); + sysbus_realize_and_unref(SYS_BUS_DEVICE(s), &error_fatal); + + memory_region_add_subregion(get_system_memory(), FSL_IMX8MM_RAM_START, + machine->ram); + + if (!qtest_enabled()) { + arm_load_kernel(&s->cpu[0], machine, &boot_info); + } +} + +static const char *imx8mm_evk_get_default_cpu_type(const MachineState *ms) +{ + if (kvm_enabled()) { + return ARM_CPU_TYPE_NAME("host"); + } + + return ARM_CPU_TYPE_NAME("cortex-a53"); +} + +static void imx8mm_evk_machine_init(MachineClass *mc) +{ + mc->desc = "NXP i.MX 8MM EVK Board"; + mc->init = imx8mm_evk_init; + mc->max_cpus = FSL_IMX8MM_NUM_CPUS; + mc->default_cpus = FSL_IMX8MM_NUM_CPUS; + mc->default_ram_size = 2 * GiB; + mc->default_ram_id = "imx8mm-evk.ram"; + mc->get_default_cpu_type = imx8mm_evk_get_default_cpu_type; +} + +DEFINE_MACHINE_AARCH64("imx8mm-evk", imx8mm_evk_machine_init) diff --git a/hw/arm/meson.build b/hw/arm/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/meson.build +++ b/hw/arm/meson.build @@ -XXX,XX +XXX,XX @@ arm_common_ss.add(when: 'CONFIG_ARMSSE', if_true: files('armsse.c')) arm_common_ss.add(when: 'CONFIG_FSL_IMX7', if_true: files('fsl-imx7.c', 'mcimx7d-sabre.c')) arm_common_ss.add(when: 'CONFIG_FSL_IMX8MP', if_true: files('fsl-imx8mp.c')) arm_common_ss.add(when: 'CONFIG_FSL_IMX8MP_EVK', if_true: files('imx8mp-evk.c')) +arm_common_ss.add(when: 'CONFIG_FSL_IMX8MM', if_true: files('fsl-imx8mm.c')) +arm_common_ss.add(when: 'CONFIG_FSL_IMX8MM_EVK', if_true: files('imx8mm-evk.c')) arm_common_ss.add(when: 'CONFIG_ARM_SMMUV3', if_true: files('smmuv3.c')) arm_common_ss.add(when: 'CONFIG_ARM_SMMUV3_ACCEL', if_true: files('smmuv3-accel.c')) stub_ss.add(files('smmuv3-accel-stubs.c')) diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ +/* + * i.MX 8MM SoC Definitions + * + * Copyright (c) 2025, NXP Semiconductors + * Author: Gaurav Sharma <gaurav.sharma_7@nxp.com> + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#ifndef FSL_IMX8MM_H +#define FSL_IMX8MM_H + +#include "cpu.h" +#include "hw/char/imx_serial.h" +#include "hw/intc/arm_gicv3_common.h" +#include "qom/object.h" +#include "qemu/units.h" + +#define TYPE_FSL_IMX8MM "fsl-imx8mm" +OBJECT_DECLARE_SIMPLE_TYPE(FslImx8mmState, FSL_IMX8MM) + +#define FSL_IMX8MM_RAM_START 0x40000000 +#define FSL_IMX8MM_RAM_SIZE_MAX (4 * GiB) + +enum FslImx8mmConfiguration { + FSL_IMX8MM_NUM_CPUS = 4, + FSL_IMX8MM_NUM_IRQS = 128, + FSL_IMX8MM_NUM_UARTS = 4, +}; + +struct FslImx8mmState { + SysBusDevice parent_obj; + + ARMCPU cpu[FSL_IMX8MM_NUM_CPUS]; + GICv3State gic; + IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; + MemoryRegion ocram; +}; + +enum FslImx8mmMemoryRegions { + FSL_IMX8MM_A53_DAP, + FSL_IMX8MM_AIPS1_CONFIGURATION, + FSL_IMX8MM_AIPS2_CONFIGURATION, + FSL_IMX8MM_AIPS3_CONFIGURATION, + FSL_IMX8MM_AIPS4_CONFIGURATION, + FSL_IMX8MM_ANA_OSC, + FSL_IMX8MM_ANA_PLL, + FSL_IMX8MM_ANA_TSENSOR, + FSL_IMX8MM_APBH_DMA, + FSL_IMX8MM_BOOT_ROM, + FSL_IMX8MM_BOOT_ROM_PROTECTED, + FSL_IMX8MM_CAAM, + FSL_IMX8MM_CAAM_MEM, + FSL_IMX8MM_CCM, + FSL_IMX8MM_CSU, + FSL_IMX8MM_DDR_CTL, + FSL_IMX8MM_DDR_PERF_MON, + FSL_IMX8MM_DDR_PHY, + FSL_IMX8MM_DDR_PHY_BROADCAST, + FSL_IMX8MM_ECSPI1, + FSL_IMX8MM_ECSPI2, + FSL_IMX8MM_ECSPI3, + FSL_IMX8MM_ENET1, + FSL_IMX8MM_GIC_DIST, + FSL_IMX8MM_GIC_REDIST, + FSL_IMX8MM_GPC, + FSL_IMX8MM_GPIO1, + FSL_IMX8MM_GPIO2, + FSL_IMX8MM_GPIO3, + FSL_IMX8MM_GPIO4, + FSL_IMX8MM_GPIO5, + FSL_IMX8MM_GPT1, + FSL_IMX8MM_GPT2, + FSL_IMX8MM_GPT3, + FSL_IMX8MM_GPT4, + FSL_IMX8MM_GPT5, + FSL_IMX8MM_GPT6, + FSL_IMX8MM_GPU2D, + FSL_IMX8MM_I2C1, + FSL_IMX8MM_I2C2, + FSL_IMX8MM_I2C3, + FSL_IMX8MM_I2C4, + FSL_IMX8MM_INTERCONNECT, + FSL_IMX8MM_IOMUXC, + FSL_IMX8MM_IOMUXC_GPR, + FSL_IMX8MM_MEDIA_BLK_CTL, + FSL_IMX8MM_LCDIF, + FSL_IMX8MM_MIPI_CSI, + FSL_IMX8MM_MIPI_DSI, + FSL_IMX8MM_MU_A, + FSL_IMX8MM_MU_B, + FSL_IMX8MM_OCOTP_CTRL, + FSL_IMX8MM_OCRAM, + FSL_IMX8MM_OCRAM_S, + FSL_IMX8MM_PCIE1, + FSL_IMX8MM_PCIE1_MEM, + FSL_IMX8MM_PCIE_PHY1, + FSL_IMX8MM_PERFMON1, + FSL_IMX8MM_PERFMON2, + FSL_IMX8MM_PWM1, + FSL_IMX8MM_PWM2, + FSL_IMX8MM_PWM3, + FSL_IMX8MM_PWM4, + FSL_IMX8MM_QOSC, + FSL_IMX8MM_QSPI, + FSL_IMX8MM_QSPI1_RX_BUFFER, + FSL_IMX8MM_QSPI1_TX_BUFFER, + FSL_IMX8MM_QSPI_MEM, + FSL_IMX8MM_RAM, + FSL_IMX8MM_RDC, + FSL_IMX8MM_SAI1, + FSL_IMX8MM_SAI2, + FSL_IMX8MM_SAI3, + FSL_IMX8MM_SAI5, + FSL_IMX8MM_SAI6, + FSL_IMX8MM_SDMA1, + FSL_IMX8MM_SDMA2, + FSL_IMX8MM_SDMA3, + FSL_IMX8MM_SEMAPHORE1, + FSL_IMX8MM_SEMAPHORE2, + FSL_IMX8MM_SEMAPHORE_HS, + FSL_IMX8MM_SNVS_HP, + FSL_IMX8MM_SPBA1, + FSL_IMX8MM_SRC, + FSL_IMX8MM_SYSCNT_CMP, + FSL_IMX8MM_SYSCNT_CTRL, + FSL_IMX8MM_SYSCNT_RD, + FSL_IMX8MM_TCM_DTCM, + FSL_IMX8MM_TCM_ITCM, + FSL_IMX8MM_TZASC, + FSL_IMX8MM_UART1, + FSL_IMX8MM_UART2, + FSL_IMX8MM_UART3, + FSL_IMX8MM_UART4, + FSL_IMX8MM_USB1, + FSL_IMX8MM_USB2, + FSL_IMX8MM_USB1_OTG, + FSL_IMX8MM_USB2_OTG, + FSL_IMX8MM_USDHC1, + FSL_IMX8MM_USDHC2, + FSL_IMX8MM_USDHC3, + FSL_IMX8MM_VPU, + FSL_IMX8MM_VPU_BLK_CTRL, + FSL_IMX8MM_VPU_G1_DECODER, + FSL_IMX8MM_VPU_G2_DECODER, + FSL_IMX8MM_WDOG1, + FSL_IMX8MM_WDOG2, + FSL_IMX8MM_WDOG3, +}; + +enum FslImx8mmIrqs { + FSL_IMX8MM_UART1_IRQ = 26, + FSL_IMX8MM_UART2_IRQ = 27, + FSL_IMX8MM_UART3_IRQ = 28, + FSL_IMX8MM_UART4_IRQ = 29, +}; + +#endif /* FSL_IMX8MM_H */ -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> Add configurable properties for register reset values that differ between i.MX 8M variants (Plus, Mini, etc.). This allows the same device implementation to be shared across multiple SoCs. Properties added: - arm-pll-fdiv-ctl0-reset: ARM PLL divider control reset value Default value is set to match i.MX 8MP reset value (0x000FA031). This can be overridden in the variant like iMX8MM with its own reset value. Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/imx8mp_analog.c | 12 +++++++++++- include/hw/misc/imx8mp_analog.h | 3 +++ 2 files changed, 14 insertions(+), 1 deletion(-) diff --git a/hw/misc/imx8mp_analog.c b/hw/misc/imx8mp_analog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/imx8mp_analog.c +++ b/hw/misc/imx8mp_analog.c @@ -XXX,XX +XXX,XX @@ #include "qemu/log.h" #include "hw/misc/imx8mp_analog.h" +#include "hw/core/qdev-properties.h" #include "migration/vmstate.h" #define ANALOG_PLL_LOCK BIT(31) @@ -XXX,XX +XXX,XX @@ static void imx8mp_analog_reset(DeviceState *dev) s->analog[ANALOG_VPU_PLL_LOCKD_CTRL] = 0x0010003f; s->analog[ANALOG_VPU_PLL_MNIT_CTRL] = 0x00280081; s->analog[ANALOG_ARM_PLL_GEN_CTRL] = 0x00000810; - s->analog[ANALOG_ARM_PLL_FDIV_CTL0] = 0x000fa031; + + /* Use property value instead of hardcoded */ + s->analog[ANALOG_ARM_PLL_FDIV_CTL0] = s->arm_pll_fdiv_ctl0_reset; + s->analog[ANALOG_ARM_PLL_LOCKD_CTRL] = 0x0010003f; s->analog[ANALOG_ARM_PLL_MNIT_CTRL] = 0x00280081; s->analog[ANALOG_SYS_PLL1_GEN_CTRL] = 0x0aaaa810; @@ -XXX,XX +XXX,XX @@ static const VMStateDescription imx8mp_analog_vmstate = { }, }; +static const Property imx8mp_analog_properties[] = { + DEFINE_PROP_UINT32("arm-pll-fdiv-ctl0-reset", IMX8MPAnalogState, + arm_pll_fdiv_ctl0_reset, 0x000fa031), /* imx8mp default */ +}; + static void imx8mp_analog_class_init(ObjectClass *klass, const void *data) { DeviceClass *dc = DEVICE_CLASS(klass); device_class_set_legacy_reset(dc, imx8mp_analog_reset); + device_class_set_props(dc, imx8mp_analog_properties); dc->vmsd = &imx8mp_analog_vmstate; dc->desc = "i.MX 8M Plus Analog Module"; } diff --git a/include/hw/misc/imx8mp_analog.h b/include/hw/misc/imx8mp_analog.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/imx8mp_analog.h +++ b/include/hw/misc/imx8mp_analog.h @@ -XXX,XX +XXX,XX @@ struct IMX8MPAnalogState { } mmio; uint32_t analog[ANALOG_MAX]; + + /* Property for variant-specific reset values */ + uint32_t arm_pll_fdiv_ctl0_reset; }; #endif /* IMX8MP_ANALOG_H */ -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> Add the Analog IP to i.MX8MM SoC. iMX8MM and i.MX8MP uses the same Analog IP so the analog ip source will be shared. The ARM PLL divider control register (arm-pll-fdiv-ctl0) has a different reset value on i.MX8MM (0x000fa030) compared to i.MX8MP (0x000fa031). So iMX8MM will be overriding this property with its own reset-value. Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx8mm.c | 12 ++++++++++++ include/hw/arm/fsl-imx8mm.h | 2 ++ 3 files changed, 15 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MP_EVK config FSL_IMX8MM bool select ARM_GIC + select FSL_IMX8MP_ANALOG select IMX config FSL_IMX8MM_EVK diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, "gic", &s->gic, gicv3_class_name()); + object_initialize_child(obj, "analog", &s->analog, TYPE_IMX8MP_ANALOG); + for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) { g_autofree char *name = g_strdup_printf("uart%d", i + 1); object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) } } + /* Analog */ + object_property_set_uint(OBJECT(&s->analog), "arm-pll-fdiv-ctl0-reset", + 0x000fa030, &error_abort); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->analog), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->analog), 0, + fsl_imx8mm_memmap[FSL_IMX8MM_ANA_PLL].addr); + /* UARTs */ for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) { static const struct { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) /* Unimplemented devices */ for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) { switch (i) { + case FSL_IMX8MM_ANA_PLL: case FSL_IMX8MM_GIC_DIST: case FSL_IMX8MM_GIC_REDIST: case FSL_IMX8MM_RAM: diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "hw/char/imx_serial.h" #include "hw/intc/arm_gicv3_common.h" +#include "hw/misc/imx8mp_analog.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { ARMCPU cpu[FSL_IMX8MM_NUM_CPUS]; GICv3State gic; + IMX8MPAnalogState analog; IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; }; -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> Add the Clock Control Module (CCM) device to i.MX8MM SoC. The CCM implementation is shared with i.MX8MP as the register layout is identical between the two variants.Hence iMX8MM will be using the source of iMX8MP CCM. Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx8mm.c | 10 ++++++++++ include/hw/arm/fsl-imx8mm.h | 2 ++ 3 files changed, 13 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM bool select ARM_GIC select FSL_IMX8MP_ANALOG + select FSL_IMX8MP_CCM select IMX config FSL_IMX8MM_EVK diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, "gic", &s->gic, gicv3_class_name()); + object_initialize_child(obj, "ccm", &s->ccm, TYPE_IMX8MP_CCM); + object_initialize_child(obj, "analog", &s->analog, TYPE_IMX8MP_ANALOG); for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) } } + /* CCM */ + if (!sysbus_realize(SYS_BUS_DEVICE(&s->ccm), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->ccm), 0, + fsl_imx8mm_memmap[FSL_IMX8MM_CCM].addr); + /* Analog */ object_property_set_uint(OBJECT(&s->analog), "arm-pll-fdiv-ctl0-reset", 0x000fa030, &error_abort); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) { switch (i) { case FSL_IMX8MM_ANA_PLL: + case FSL_IMX8MM_CCM: case FSL_IMX8MM_GIC_DIST: case FSL_IMX8MM_GIC_REDIST: case FSL_IMX8MM_RAM: diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/char/imx_serial.h" #include "hw/intc/arm_gicv3_common.h" #include "hw/misc/imx8mp_analog.h" +#include "hw/misc/imx8mp_ccm.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { ARMCPU cpu[FSL_IMX8MM_NUM_CPUS]; GICv3State gic; + IMX8MPCCMState ccm; IMX8MPAnalogState analog; IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> SNVS contains an RTC which allows Linux to deal correctly with time Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/fsl-imx8mm.c | 10 ++++++++++ include/hw/arm/fsl-imx8mm.h | 2 ++ 2 files changed, 12 insertions(+) diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, "analog", &s->analog, TYPE_IMX8MP_ANALOG); + object_initialize_child(obj, "snvs", &s->snvs, TYPE_IMX7_SNVS); + for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) { g_autofree char *name = g_strdup_printf("uart%d", i + 1); object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr, &s->ocram); + /* SNVS */ + if (!sysbus_realize(SYS_BUS_DEVICE(&s->snvs), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, + fsl_imx8mm_memmap[FSL_IMX8MM_SNVS_HP].addr); + /* Unimplemented devices */ for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) { switch (i) { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_GIC_REDIST: case FSL_IMX8MM_RAM: case FSL_IMX8MM_OCRAM: + case FSL_IMX8MM_SNVS_HP: case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4: /* device implemented and treated above */ break; diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "hw/char/imx_serial.h" #include "hw/intc/arm_gicv3_common.h" +#include "hw/misc/imx7_snvs.h" #include "hw/misc/imx8mp_analog.h" #include "hw/misc/imx8mp_ccm.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { GICv3State gic; IMX8MPCCMState ccm; IMX8MPAnalogState analog; + IMX7SNVSState snvs; IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; }; -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> It enables emulation of SD/MMC cards through a virtual SDHCI interface The emulated SDHCI controller allows guest OS to use emulated storage as a standard block device. This will allow running the images such as those generated by Buildroot. Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx8mm.c | 25 +++++++++++++++++++++++++ hw/arm/imx8mm-evk.c | 17 +++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 7 +++++++ 4 files changed, 50 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM select FSL_IMX8MP_ANALOG select FSL_IMX8MP_CCM select IMX + select SDHCI config FSL_IMX8MM_EVK bool diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); } + for (i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) { + g_autofree char *name = g_strdup_printf("usdhc%d", i + 1); + object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC); + } } static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr, &s->ocram); + /* USDHCs */ + for (i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) { + static const struct { + hwaddr addr; + unsigned int irq; + } usdhc_table[FSL_IMX8MM_NUM_USDHCS] = { + { fsl_imx8mm_memmap[FSL_IMX8MM_USDHC1].addr, FSL_IMX8MM_USDHC1_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_USDHC2].addr, FSL_IMX8MM_USDHC2_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_USDHC3].addr, FSL_IMX8MM_USDHC3_IRQ }, + }; + + if (!sysbus_realize(SYS_BUS_DEVICE(&s->usdhc[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->usdhc[i]), 0, usdhc_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->usdhc[i]), 0, + qdev_get_gpio_in(gicdev, usdhc_table[i].irq)); + } + /* SNVS */ if (!sysbus_realize(SYS_BUS_DEVICE(&s->snvs), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_OCRAM: case FSL_IMX8MM_SNVS_HP: case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4: + case FSL_IMX8MM_USDHC1 ... FSL_IMX8MM_USDHC3: /* device implemented and treated above */ break; diff --git a/hw/arm/imx8mm-evk.c b/hw/arm/imx8mm-evk.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/imx8mm-evk.c +++ b/hw/arm/imx8mm-evk.c @@ -XXX,XX +XXX,XX @@ static void imx8mm_evk_init(MachineState *machine) memory_region_add_subregion(get_system_memory(), FSL_IMX8MM_RAM_START, machine->ram); + for (int i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) { + BusState *bus; + DeviceState *carddev; + BlockBackend *blk; + DriveInfo *di = drive_get(IF_SD, i, 0); + + if (!di) { + continue; + } + + blk = blk_by_legacy_dinfo(di); + bus = qdev_get_child_bus(DEVICE(&s->usdhc[i]), "sd-bus"); + carddev = qdev_new(TYPE_SD_CARD); + qdev_prop_set_drive_err(carddev, "drive", blk, &error_fatal); + qdev_realize_and_unref(carddev, bus, &error_fatal); + } + if (!qtest_enabled()) { arm_load_kernel(&s->cpu[0], machine, &boot_info); } diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx8mp_analog.h" #include "hw/misc/imx8mp_ccm.h" +#include "hw/sd/sdhci.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ enum FslImx8mmConfiguration { FSL_IMX8MM_NUM_CPUS = 4, FSL_IMX8MM_NUM_IRQS = 128, FSL_IMX8MM_NUM_UARTS = 4, + FSL_IMX8MM_NUM_USDHCS = 3, }; struct FslImx8mmState { @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMX7SNVSState snvs; IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; + SDHCIState usdhc[FSL_IMX8MM_NUM_USDHCS]; }; enum FslImx8mmMemoryRegions { @@ -XXX,XX +XXX,XX @@ enum FslImx8mmMemoryRegions { }; enum FslImx8mmIrqs { + FSL_IMX8MM_USDHC1_IRQ = 22, + FSL_IMX8MM_USDHC2_IRQ = 23, + FSL_IMX8MM_USDHC3_IRQ = 24, + FSL_IMX8MM_UART1_IRQ = 26, FSL_IMX8MM_UART2_IRQ = 27, FSL_IMX8MM_UART3_IRQ = 28, -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> This enables support for Designware PCI Express Controller emulation It provides a controlled environment to debug the linux pci subsystem Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 3 +++ hw/arm/fsl-imx8mm.c | 30 ++++++++++++++++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 10 ++++++++++ 3 files changed, 43 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MP_EVK config FSL_IMX8MM bool + imply PCI_DEVICES select ARM_GIC select FSL_IMX8MP_ANALOG select FSL_IMX8MP_CCM select IMX select SDHCI + select PCI_EXPRESS_DESIGNWARE + select PCI_EXPRESS_FSL_IMX8M_PHY config FSL_IMX8MM_EVK bool diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) g_autofree char *name = g_strdup_printf("usdhc%d", i + 1); object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC); } + + object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST); + object_initialize_child(obj, "pcie_phy", &s->pcie_phy, + TYPE_FSL_IMX8M_PCIE_PHY); } static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, fsl_imx8mm_memmap[FSL_IMX8MM_SNVS_HP].addr); + /* PCIe */ + if (!sysbus_realize(SYS_BUS_DEVICE(&s->pcie), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->pcie), 0, + fsl_imx8mm_memmap[FSL_IMX8MM_PCIE1].addr); + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 0, + qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_INTA_IRQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 1, + qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_INTB_IRQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 2, + qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_INTC_IRQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 3, + qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_INTD_IRQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 4, + qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_MSI_IRQ)); + + if (!sysbus_realize(SYS_BUS_DEVICE(&s->pcie_phy), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->pcie_phy), 0, + fsl_imx8mm_memmap[FSL_IMX8MM_PCIE_PHY1].addr); + /* Unimplemented devices */ for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) { switch (i) { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_CCM: case FSL_IMX8MM_GIC_DIST: case FSL_IMX8MM_GIC_REDIST: + case FSL_IMX8MM_PCIE1: + case FSL_IMX8MM_PCIE_PHY1: case FSL_IMX8MM_RAM: case FSL_IMX8MM_OCRAM: case FSL_IMX8MM_SNVS_HP: diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx8mp_analog.h" #include "hw/misc/imx8mp_ccm.h" +#include "hw/pci-host/designware.h" +#include "hw/pci-host/fsl_imx8m_phy.h" #include "hw/sd/sdhci.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; SDHCIState usdhc[FSL_IMX8MM_NUM_USDHCS]; + DesignwarePCIEHost pcie; + FslImx8mPciePhyState pcie_phy; }; enum FslImx8mmMemoryRegions { @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_UART2_IRQ = 27, FSL_IMX8MM_UART3_IRQ = 28, FSL_IMX8MM_UART4_IRQ = 29, + + FSL_IMX8MM_PCI_INTA_IRQ = 122, + FSL_IMX8MM_PCI_INTB_IRQ = 123, + FSL_IMX8MM_PCI_INTC_IRQ = 124, + FSL_IMX8MM_PCI_INTD_IRQ = 125, + FSL_IMX8MM_PCI_MSI_IRQ = 127, }; #endif /* FSL_IMX8MM_H */ -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> Enabled GPIO controller emulation Also updated the GPIO IRQ lines of iMX8MM Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/fsl-imx8mm.c | 54 +++++++++++++++++++++++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 14 ++++++++++ 2 files changed, 68 insertions(+) diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); } + for (i = 0; i < FSL_IMX8MM_NUM_GPIOS; i++) { + g_autofree char *name = g_strdup_printf("gpio%d", i + 1); + object_initialize_child(obj, name, &s->gpio[i], TYPE_IMX_GPIO); + } + for (i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) { g_autofree char *name = g_strdup_printf("usdhc%d", i + 1); object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr, &s->ocram); + /* GPIOs */ + for (i = 0; i < FSL_IMX8MM_NUM_GPIOS; i++) { + static const struct { + hwaddr addr; + unsigned int irq_low; + unsigned int irq_high; + } gpio_table[FSL_IMX8MM_NUM_GPIOS] = { + { + fsl_imx8mm_memmap[FSL_IMX8MM_GPIO1].addr, + FSL_IMX8MM_GPIO1_LOW_IRQ, + FSL_IMX8MM_GPIO1_HIGH_IRQ + }, + { + fsl_imx8mm_memmap[FSL_IMX8MM_GPIO2].addr, + FSL_IMX8MM_GPIO2_LOW_IRQ, + FSL_IMX8MM_GPIO2_HIGH_IRQ + }, + { + fsl_imx8mm_memmap[FSL_IMX8MM_GPIO3].addr, + FSL_IMX8MM_GPIO3_LOW_IRQ, + FSL_IMX8MM_GPIO3_HIGH_IRQ + }, + { + fsl_imx8mm_memmap[FSL_IMX8MM_GPIO4].addr, + FSL_IMX8MM_GPIO4_LOW_IRQ, + FSL_IMX8MM_GPIO4_HIGH_IRQ + }, + { + fsl_imx8mm_memmap[FSL_IMX8MM_GPIO5].addr, + FSL_IMX8MM_GPIO5_LOW_IRQ, + FSL_IMX8MM_GPIO5_HIGH_IRQ + }, + }; + object_property_set_bool(OBJECT(&s->gpio[i]), "has-edge-sel", true, + &error_abort); + object_property_set_bool(OBJECT(&s->gpio[i]), "has-upper-pin-irq", + true, &error_abort); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpio[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio[i]), 0, gpio_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 0, + qdev_get_gpio_in(gicdev, gpio_table[i].irq_low)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 1, + qdev_get_gpio_in(gicdev, gpio_table[i].irq_high)); + } + /* USDHCs */ for (i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) { static const struct { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_CCM: case FSL_IMX8MM_GIC_DIST: case FSL_IMX8MM_GIC_REDIST: + case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5: case FSL_IMX8MM_PCIE1: case FSL_IMX8MM_PCIE_PHY1: case FSL_IMX8MM_RAM: diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "hw/char/imx_serial.h" +#include "hw/gpio/imx_gpio.h" #include "hw/intc/arm_gicv3_common.h" #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx8mp_analog.h" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(FslImx8mmState, FSL_IMX8MM) enum FslImx8mmConfiguration { FSL_IMX8MM_NUM_CPUS = 4, + FSL_IMX8MM_NUM_GPIOS = 5, FSL_IMX8MM_NUM_IRQS = 128, FSL_IMX8MM_NUM_UARTS = 4, FSL_IMX8MM_NUM_USDHCS = 3, @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { ARMCPU cpu[FSL_IMX8MM_NUM_CPUS]; GICv3State gic; + IMXGPIOState gpio[FSL_IMX8MM_NUM_GPIOS]; IMX8MPCCMState ccm; IMX8MPAnalogState analog; IMX7SNVSState snvs; @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_UART3_IRQ = 28, FSL_IMX8MM_UART4_IRQ = 29, + FSL_IMX8MM_GPIO1_LOW_IRQ = 64, + FSL_IMX8MM_GPIO1_HIGH_IRQ = 65, + FSL_IMX8MM_GPIO2_LOW_IRQ = 66, + FSL_IMX8MM_GPIO2_HIGH_IRQ = 67, + FSL_IMX8MM_GPIO3_LOW_IRQ = 68, + FSL_IMX8MM_GPIO3_HIGH_IRQ = 69, + FSL_IMX8MM_GPIO4_LOW_IRQ = 70, + FSL_IMX8MM_GPIO4_HIGH_IRQ = 71, + FSL_IMX8MM_GPIO5_LOW_IRQ = 72, + FSL_IMX8MM_GPIO5_HIGH_IRQ = 73, + FSL_IMX8MM_PCI_INTA_IRQ = 122, FSL_IMX8MM_PCI_INTB_IRQ = 123, FSL_IMX8MM_PCI_INTC_IRQ = 124, -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> This can be used to test and debug I2C device drivers. Added I2C interrupts Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 2 ++ hw/arm/fsl-imx8mm.c | 27 +++++++++++++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 8 ++++++++ 3 files changed, 37 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MP_EVK config FSL_IMX8MM bool imply PCI_DEVICES + imply I2C_DEVICES select ARM_GIC select FSL_IMX8MP_ANALOG select FSL_IMX8MP_CCM select IMX + select IMX_I2C select SDHCI select PCI_EXPRESS_DESIGNWARE select PCI_EXPRESS_FSL_IMX8M_PHY diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); } + for (i = 0; i < FSL_IMX8MM_NUM_I2CS; i++) { + g_autofree char *name = g_strdup_printf("i2c%d", i + 1); + object_initialize_child(obj, name, &s->i2c[i], TYPE_IMX_I2C); + } + for (i = 0; i < FSL_IMX8MM_NUM_GPIOS; i++) { g_autofree char *name = g_strdup_printf("gpio%d", i + 1); object_initialize_child(obj, name, &s->gpio[i], TYPE_IMX_GPIO); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr, &s->ocram); + /* I2Cs */ + for (i = 0; i < FSL_IMX8MM_NUM_I2CS; i++) { + static const struct { + hwaddr addr; + unsigned int irq; + } i2c_table[FSL_IMX8MM_NUM_I2CS] = { + { fsl_imx8mm_memmap[FSL_IMX8MM_I2C1].addr, FSL_IMX8MM_I2C1_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_I2C2].addr, FSL_IMX8MM_I2C2_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_I2C3].addr, FSL_IMX8MM_I2C3_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_I2C4].addr, FSL_IMX8MM_I2C4_IRQ }, + }; + + if (!sysbus_realize(SYS_BUS_DEVICE(&s->i2c[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c[i]), 0, i2c_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c[i]), 0, + qdev_get_gpio_in(gicdev, i2c_table[i].irq)); + } + /* GPIOs */ for (i = 0; i < FSL_IMX8MM_NUM_GPIOS; i++) { static const struct { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_GIC_DIST: case FSL_IMX8MM_GIC_REDIST: case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5: + case FSL_IMX8MM_I2C1 ... FSL_IMX8MM_I2C4: case FSL_IMX8MM_PCIE1: case FSL_IMX8MM_PCIE_PHY1: case FSL_IMX8MM_RAM: diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "hw/char/imx_serial.h" #include "hw/gpio/imx_gpio.h" +#include "hw/i2c/imx_i2c.h" #include "hw/intc/arm_gicv3_common.h" #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx8mp_analog.h" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(FslImx8mmState, FSL_IMX8MM) enum FslImx8mmConfiguration { FSL_IMX8MM_NUM_CPUS = 4, FSL_IMX8MM_NUM_GPIOS = 5, + FSL_IMX8MM_NUM_I2CS = 4, FSL_IMX8MM_NUM_IRQS = 128, FSL_IMX8MM_NUM_UARTS = 4, FSL_IMX8MM_NUM_USDHCS = 3, @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMX8MPCCMState ccm; IMX8MPAnalogState analog; IMX7SNVSState snvs; + IMXI2CState i2c[FSL_IMX8MM_NUM_I2CS]; IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; SDHCIState usdhc[FSL_IMX8MM_NUM_USDHCS]; @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_UART3_IRQ = 28, FSL_IMX8MM_UART4_IRQ = 29, + FSL_IMX8MM_I2C1_IRQ = 35, + FSL_IMX8MM_I2C2_IRQ = 36, + FSL_IMX8MM_I2C3_IRQ = 37, + FSL_IMX8MM_I2C4_IRQ = 38, + FSL_IMX8MM_GPIO1_LOW_IRQ = 64, FSL_IMX8MM_GPIO1_HIGH_IRQ = 65, FSL_IMX8MM_GPIO2_LOW_IRQ = 66, -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> It enables emulation of ECSPI in iMX8MM Added SPI IRQ lines Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/fsl-imx8mm.c | 26 ++++++++++++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 7 +++++++ 2 files changed, 33 insertions(+) diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC); } + for (i = 0; i < FSL_IMX8MM_NUM_ECSPIS; i++) { + g_autofree char *name = g_strdup_printf("spi%d", i + 1); + object_initialize_child(obj, name, &s->spi[i], TYPE_IMX_SPI); + } + object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST); object_initialize_child(obj, "pcie_phy", &s->pcie_phy, TYPE_FSL_IMX8M_PCIE_PHY); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) qdev_get_gpio_in(gicdev, usdhc_table[i].irq)); } + /* ECSPIs */ + for (i = 0; i < FSL_IMX8MM_NUM_ECSPIS; i++) { + static const struct { + hwaddr addr; + unsigned int irq; + } spi_table[FSL_IMX8MM_NUM_ECSPIS] = { + { fsl_imx8mm_memmap[FSL_IMX8MM_ECSPI1].addr, FSL_IMX8MM_ECSPI1_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_ECSPI2].addr, FSL_IMX8MM_ECSPI2_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_ECSPI3].addr, FSL_IMX8MM_ECSPI3_IRQ }, + }; + + if (!sysbus_realize(SYS_BUS_DEVICE(&s->spi[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0, spi_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0, + qdev_get_gpio_in(gicdev, spi_table[i].irq)); + } + /* SNVS */ if (!sysbus_realize(SYS_BUS_DEVICE(&s->snvs), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_GIC_DIST: case FSL_IMX8MM_GIC_REDIST: case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5: + case FSL_IMX8MM_ECSPI1 ... FSL_IMX8MM_ECSPI3: case FSL_IMX8MM_I2C1 ... FSL_IMX8MM_I2C4: case FSL_IMX8MM_PCIE1: case FSL_IMX8MM_PCIE_PHY1: diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/pci-host/designware.h" #include "hw/pci-host/fsl_imx8m_phy.h" #include "hw/sd/sdhci.h" +#include "hw/ssi/imx_spi.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(FslImx8mmState, FSL_IMX8MM) enum FslImx8mmConfiguration { FSL_IMX8MM_NUM_CPUS = 4, + FSL_IMX8MM_NUM_ECSPIS = 3, FSL_IMX8MM_NUM_GPIOS = 5, FSL_IMX8MM_NUM_I2CS = 4, FSL_IMX8MM_NUM_IRQS = 128, @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMX8MPCCMState ccm; IMX8MPAnalogState analog; IMX7SNVSState snvs; + IMXSPIState spi[FSL_IMX8MM_NUM_ECSPIS]; IMXI2CState i2c[FSL_IMX8MM_NUM_I2CS]; IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_UART3_IRQ = 28, FSL_IMX8MM_UART4_IRQ = 29, + FSL_IMX8MM_ECSPI1_IRQ = 31, + FSL_IMX8MM_ECSPI2_IRQ = 32, + FSL_IMX8MM_ECSPI3_IRQ = 33, + FSL_IMX8MM_I2C1_IRQ = 35, FSL_IMX8MM_I2C2_IRQ = 36, FSL_IMX8MM_I2C3_IRQ = 37, -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> It enables emulation of WDT in iMX8MM Added WDT IRQ lines Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx8mm.c | 28 ++++++++++++++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 7 +++++++ 3 files changed, 36 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM select SDHCI select PCI_EXPRESS_DESIGNWARE select PCI_EXPRESS_FSL_IMX8M_PHY + select WDT_IMX2 config FSL_IMX8MM_EVK bool diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->spi[i], TYPE_IMX_SPI); } + for (i = 0; i < FSL_IMX8MM_NUM_WDTS; i++) { + g_autofree char *name = g_strdup_printf("wdt%d", i); + object_initialize_child(obj, name, &s->wdt[i], TYPE_IMX2_WDT); + } + object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST); object_initialize_child(obj, "pcie_phy", &s->pcie_phy, TYPE_FSL_IMX8M_PCIE_PHY); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, fsl_imx8mm_memmap[FSL_IMX8MM_SNVS_HP].addr); + /* Watchdogs */ + for (i = 0; i < FSL_IMX8MM_NUM_WDTS; i++) { + static const struct { + hwaddr addr; + unsigned int irq; + } wdog_table[FSL_IMX8MM_NUM_WDTS] = { + { fsl_imx8mm_memmap[FSL_IMX8MM_WDOG1].addr, FSL_IMX8MM_WDOG1_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_WDOG2].addr, FSL_IMX8MM_WDOG2_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_WDOG3].addr, FSL_IMX8MM_WDOG3_IRQ }, + }; + + object_property_set_bool(OBJECT(&s->wdt[i]), "pretimeout-support", + true, &error_abort); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->wdt[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[i]), 0, wdog_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->wdt[i]), 0, + qdev_get_gpio_in(gicdev, wdog_table[i].irq)); + } + /* PCIe */ if (!sysbus_realize(SYS_BUS_DEVICE(&s->pcie), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_SNVS_HP: case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4: case FSL_IMX8MM_USDHC1 ... FSL_IMX8MM_USDHC3: + case FSL_IMX8MM_WDOG1 ... FSL_IMX8MM_WDOG3: /* device implemented and treated above */ break; diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/pci-host/fsl_imx8m_phy.h" #include "hw/sd/sdhci.h" #include "hw/ssi/imx_spi.h" +#include "hw/watchdog/wdt_imx2.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ enum FslImx8mmConfiguration { FSL_IMX8MM_NUM_IRQS = 128, FSL_IMX8MM_NUM_UARTS = 4, FSL_IMX8MM_NUM_USDHCS = 3, + FSL_IMX8MM_NUM_WDTS = 3, }; struct FslImx8mmState { @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; SDHCIState usdhc[FSL_IMX8MM_NUM_USDHCS]; + IMX2WdtState wdt[FSL_IMX8MM_NUM_WDTS]; DesignwarePCIEHost pcie; FslImx8mPciePhyState pcie_phy; }; @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_GPIO5_LOW_IRQ = 72, FSL_IMX8MM_GPIO5_HIGH_IRQ = 73, + FSL_IMX8MM_WDOG1_IRQ = 78, + FSL_IMX8MM_WDOG2_IRQ = 79, + FSL_IMX8MM_WDOG3_IRQ = 10, + FSL_IMX8MM_PCI_INTA_IRQ = 122, FSL_IMX8MM_PCI_INTB_IRQ = 123, FSL_IMX8MM_PCI_INTC_IRQ = 124, -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> It enables emulation of GPT in iMX8MM Added GPT IRQ lines Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx8mm.c | 54 +++++++++++++++++++++++++++++++++++++ hw/timer/imx_gpt.c | 26 ++++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 11 ++++++++ include/hw/timer/imx_gpt.h | 2 ++ 5 files changed, 94 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM select FSL_IMX8MP_CCM select IMX select IMX_I2C + select OR_IRQ select SDHCI select PCI_EXPRESS_DESIGNWARE select PCI_EXPRESS_FSL_IMX8M_PHY diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); } + for (i = 0; i < FSL_IMX8MM_NUM_GPTS; i++) { + g_autofree char *name = g_strdup_printf("gpt%d", i + 1); + object_initialize_child(obj, name, &s->gpt[i], TYPE_IMX8MM_GPT); + } + object_initialize_child(obj, "gpt5-gpt6-irq", &s->gpt5_gpt6_irq, + TYPE_OR_IRQ); + for (i = 0; i < FSL_IMX8MM_NUM_I2CS; i++) { g_autofree char *name = g_strdup_printf("i2c%d", i + 1); object_initialize_child(obj, name, &s->i2c[i], TYPE_IMX_I2C); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr, &s->ocram); + /* GPTs */ + object_property_set_int(OBJECT(&s->gpt5_gpt6_irq), "num-lines", 2, + &error_abort); + if (!qdev_realize(DEVICE(&s->gpt5_gpt6_irq), NULL, errp)) { + return; + } + + qdev_connect_gpio_out(DEVICE(&s->gpt5_gpt6_irq), 0, + qdev_get_gpio_in(gicdev, FSL_IMX8MM_GPT5_GPT6_IRQ)); + + for (i = 0; i < FSL_IMX8MM_NUM_GPTS; i++) { + hwaddr gpt_addrs[FSL_IMX8MM_NUM_GPTS] = { + fsl_imx8mm_memmap[FSL_IMX8MM_GPT1].addr, + fsl_imx8mm_memmap[FSL_IMX8MM_GPT2].addr, + fsl_imx8mm_memmap[FSL_IMX8MM_GPT3].addr, + fsl_imx8mm_memmap[FSL_IMX8MM_GPT4].addr, + fsl_imx8mm_memmap[FSL_IMX8MM_GPT5].addr, + fsl_imx8mm_memmap[FSL_IMX8MM_GPT6].addr, + }; + + s->gpt[i].ccm = IMX_CCM(&s->ccm); + + if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpt[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpt[i]), 0, gpt_addrs[i]); + + if (i < FSL_IMX8MM_NUM_GPTS - 2) { + static const unsigned int gpt_irqs[FSL_IMX8MM_NUM_GPTS - 2] = { + FSL_IMX8MM_GPT1_IRQ, + FSL_IMX8MM_GPT2_IRQ, + FSL_IMX8MM_GPT3_IRQ, + FSL_IMX8MM_GPT4_IRQ, + }; + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpt[i]), 0, + qdev_get_gpio_in(gicdev, gpt_irqs[i])); + } else { + int irq = i - FSL_IMX8MM_NUM_GPTS + 2; + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpt[i]), 0, + qdev_get_gpio_in(DEVICE(&s->gpt5_gpt6_irq), irq)); + } + } + /* I2Cs */ for (i = 0; i < FSL_IMX8MM_NUM_I2CS; i++) { static const struct { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_GIC_DIST: case FSL_IMX8MM_GIC_REDIST: case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5: + case FSL_IMX8MM_GPT1 ... FSL_IMX8MM_GPT6: case FSL_IMX8MM_ECSPI1 ... FSL_IMX8MM_ECSPI3: case FSL_IMX8MM_I2C1 ... FSL_IMX8MM_I2C4: case FSL_IMX8MM_PCIE1: diff --git a/hw/timer/imx_gpt.c b/hw/timer/imx_gpt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/imx_gpt.c +++ b/hw/timer/imx_gpt.c @@ -XXX,XX +XXX,XX @@ * Originally written by Hans Jiang * Updated by Peter Chubb * Updated by Jean-Christophe Dubois <jcd@tribudubois.net> + * Updated by Gaurav Sharma <gaurav.sharma_7@nxp.com> * * This code is licensed under GPL version 2 or later. See * the COPYING file in the top-level directory. @@ -XXX,XX +XXX,XX @@ static const IMXClk imx8mp_gpt_clocks[] = { CLK_NONE, /* 111 not defined */ }; +static const IMXClk imx8mm_gpt_clocks[] = { + CLK_NONE, /* 000 No clock source */ + CLK_IPG, /* 001 ipg_clk, 532MHz */ + CLK_IPG_HIGH, /* 010 ipg_clk_highfreq */ + CLK_EXT, /* 011 External clock */ + CLK_32k, /* 100 ipg_clk_32k */ + CLK_HIGH, /* 101 ipg_clk_16M */ + CLK_NONE, /* 110 not defined */ + CLK_NONE, /* 111 not defined */ +}; + /* Must be called from within ptimer_transaction_begin/commit block */ static void imx_gpt_set_freq(IMXGPTState *s) { @@ -XXX,XX +XXX,XX @@ static void imx8mp_gpt_init(Object *obj) s->clocks = imx8mp_gpt_clocks; } +static void imx8mm_gpt_init(Object *obj) +{ + IMXGPTState *s = IMX_GPT(obj); + + s->clocks = imx8mm_gpt_clocks; +} + static const TypeInfo imx25_gpt_info = { .name = TYPE_IMX25_GPT, .parent = TYPE_SYS_BUS_DEVICE, @@ -XXX,XX +XXX,XX @@ static const TypeInfo imx8mp_gpt_info = { .instance_init = imx8mp_gpt_init, }; +static const TypeInfo imx8mm_gpt_info = { + .name = TYPE_IMX8MM_GPT, + .parent = TYPE_IMX25_GPT, + .instance_init = imx8mm_gpt_init, +}; + static void imx_gpt_register_types(void) { type_register_static(&imx25_gpt_info); @@ -XXX,XX +XXX,XX @@ static void imx_gpt_register_types(void) type_register_static(&imx6ul_gpt_info); type_register_static(&imx7_gpt_info); type_register_static(&imx8mp_gpt_info); + type_register_static(&imx8mm_gpt_info); } type_init(imx_gpt_register_types) diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx8mp_analog.h" #include "hw/misc/imx8mp_ccm.h" +#include "hw/or-irq.h" #include "hw/pci-host/designware.h" #include "hw/pci-host/fsl_imx8m_phy.h" #include "hw/sd/sdhci.h" #include "hw/ssi/imx_spi.h" +#include "hw/timer/imx_gpt.h" #include "hw/watchdog/wdt_imx2.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ enum FslImx8mmConfiguration { FSL_IMX8MM_NUM_CPUS = 4, FSL_IMX8MM_NUM_ECSPIS = 3, FSL_IMX8MM_NUM_GPIOS = 5, + FSL_IMX8MM_NUM_GPTS = 6, FSL_IMX8MM_NUM_I2CS = 4, FSL_IMX8MM_NUM_IRQS = 128, FSL_IMX8MM_NUM_UARTS = 4, @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { ARMCPU cpu[FSL_IMX8MM_NUM_CPUS]; GICv3State gic; + IMXGPTState gpt[FSL_IMX8MM_NUM_GPTS]; IMXGPIOState gpio[FSL_IMX8MM_NUM_GPIOS]; IMX8MPCCMState ccm; IMX8MPAnalogState analog; @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMX2WdtState wdt[FSL_IMX8MM_NUM_WDTS]; DesignwarePCIEHost pcie; FslImx8mPciePhyState pcie_phy; + OrIRQState gpt5_gpt6_irq; }; enum FslImx8mmMemoryRegions { @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_I2C3_IRQ = 37, FSL_IMX8MM_I2C4_IRQ = 38, + FSL_IMX8MM_GPT1_IRQ = 55, + FSL_IMX8MM_GPT2_IRQ = 54, + FSL_IMX8MM_GPT3_IRQ = 53, + FSL_IMX8MM_GPT4_IRQ = 52, + FSL_IMX8MM_GPT5_GPT6_IRQ = 51, + FSL_IMX8MM_GPIO1_LOW_IRQ = 64, FSL_IMX8MM_GPIO1_HIGH_IRQ = 65, FSL_IMX8MM_GPIO2_LOW_IRQ = 66, diff --git a/include/hw/timer/imx_gpt.h b/include/hw/timer/imx_gpt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/imx_gpt.h +++ b/include/hw/timer/imx_gpt.h @@ -XXX,XX +XXX,XX @@ * Originally written by Hans Jiang * Updated by Peter Chubb * Updated by Jean-Christophe Dubois <jcd@tribudubois.net> + * Updated by Gaurav Sharma <gaurav.sharma_7@nxp.com> * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal @@ -XXX,XX +XXX,XX @@ #define TYPE_IMX6UL_GPT "imx6ul.gpt" #define TYPE_IMX7_GPT "imx7.gpt" #define TYPE_IMX8MP_GPT "imx8mp.gpt" +#define TYPE_IMX8MM_GPT "imx8mm.gpt" #define TYPE_IMX_GPT TYPE_IMX25_GPT -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> It enables emulation of ENET ethernet controller in iMX8MM Enables testing and debugging of network dependent drivers Added ENET MAC IRQ lines Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx8mm.c | 24 ++++++++++++++++++++++++ hw/arm/imx8mm-evk.c | 1 + include/hw/arm/fsl-imx8mm.h | 10 +++++++++- 4 files changed, 35 insertions(+), 1 deletion(-) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM select FSL_IMX8MP_ANALOG select FSL_IMX8MP_CCM select IMX + select IMX_FEC select IMX_I2C select OR_IRQ select SDHCI diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->wdt[i], TYPE_IMX2_WDT); } + object_initialize_child(obj, "eth0", &s->enet, TYPE_IMX_ENET); + object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST); object_initialize_child(obj, "pcie_phy", &s->pcie_phy, TYPE_FSL_IMX8M_PCIE_PHY); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) qdev_get_gpio_in(gicdev, spi_table[i].irq)); } + /* ENET1 */ + object_property_set_uint(OBJECT(&s->enet), "phy-num", s->phy_num, + &error_abort); + object_property_set_uint(OBJECT(&s->enet), "tx-ring-num", 3, &error_abort); + qemu_configure_nic_device(DEVICE(&s->enet), true, NULL); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->enet), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->enet), 0, + fsl_imx8mm_memmap[FSL_IMX8MM_ENET1].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->enet), 0, + qdev_get_gpio_in(gicdev, FSL_IMX8MM_ENET1_MAC_IRQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->enet), 1, + qdev_get_gpio_in(gicdev, FSL_IMX6_ENET1_MAC_1588_IRQ)); + /* SNVS */ if (!sysbus_realize(SYS_BUS_DEVICE(&s->snvs), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5: case FSL_IMX8MM_GPT1 ... FSL_IMX8MM_GPT6: case FSL_IMX8MM_ECSPI1 ... FSL_IMX8MM_ECSPI3: + case FSL_IMX8MM_ENET1: case FSL_IMX8MM_I2C1 ... FSL_IMX8MM_I2C4: case FSL_IMX8MM_PCIE1: case FSL_IMX8MM_PCIE_PHY1: @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) } } +static const Property fsl_imx8mm_properties[] = { + DEFINE_PROP_UINT32("fec1-phy-num", FslImx8mmState, phy_num, 0), + DEFINE_PROP_BOOL("fec1-phy-connected", FslImx8mmState, phy_connected, true), +}; + static void fsl_imx8mm_class_init(ObjectClass *oc, const void *data) { DeviceClass *dc = DEVICE_CLASS(oc); + device_class_set_props(dc, fsl_imx8mm_properties); dc->realize = fsl_imx8mm_realize; dc->desc = "i.MX 8MM SoC"; diff --git a/hw/arm/imx8mm-evk.c b/hw/arm/imx8mm-evk.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/imx8mm-evk.c +++ b/hw/arm/imx8mm-evk.c @@ -XXX,XX +XXX,XX @@ static void imx8mm_evk_init(MachineState *machine) s = FSL_IMX8MM(object_new_with_props(TYPE_FSL_IMX8MM, OBJECT(machine), "soc", &error_fatal, NULL)); + object_property_set_uint(OBJECT(s), "fec1-phy-num", 1, &error_fatal); sysbus_realize_and_unref(SYS_BUS_DEVICE(s), &error_fatal); memory_region_add_subregion(get_system_memory(), FSL_IMX8MM_RAM_START, diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx8mp_analog.h" #include "hw/misc/imx8mp_ccm.h" -#include "hw/or-irq.h" +#include "hw/net/imx_fec.h" +#include "hw/core/or-irq.h" #include "hw/pci-host/designware.h" #include "hw/pci-host/fsl_imx8m_phy.h" #include "hw/sd/sdhci.h" @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMXI2CState i2c[FSL_IMX8MM_NUM_I2CS]; IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; + IMXFECState enet; SDHCIState usdhc[FSL_IMX8MM_NUM_USDHCS]; IMX2WdtState wdt[FSL_IMX8MM_NUM_WDTS]; DesignwarePCIEHost pcie; FslImx8mPciePhyState pcie_phy; OrIRQState gpt5_gpt6_irq; + + uint32_t phy_num; + bool phy_connected; }; enum FslImx8mmMemoryRegions { @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_WDOG2_IRQ = 79, FSL_IMX8MM_WDOG3_IRQ = 10, + FSL_IMX8MM_ENET1_MAC_IRQ = 118, + FSL_IMX6_ENET1_MAC_1588_IRQ = 121, + FSL_IMX8MM_PCI_INTA_IRQ = 122, FSL_IMX8MM_PCI_INTB_IRQ = 123, FSL_IMX8MM_PCI_INTC_IRQ = 124, -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> It enables emulation of USB on iMX8MM Enables testing and debugging of USB drivers Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx8mm.c | 27 +++++++++++++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 6 ++++++ 3 files changed, 34 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM select SDHCI select PCI_EXPRESS_DESIGNWARE select PCI_EXPRESS_FSL_IMX8M_PHY + select USB_DWC3 select WDT_IMX2 config FSL_IMX8MM_EVK diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC); } + for (i = 0; i < FSL_IMX8MM_NUM_USBS; i++) { + g_autofree char *name = g_strdup_printf("usb%d", i); + object_initialize_child(obj, name, &s->usb[i], TYPE_USB_DWC3); + } + for (i = 0; i < FSL_IMX8MM_NUM_ECSPIS; i++) { g_autofree char *name = g_strdup_printf("spi%d", i + 1); object_initialize_child(obj, name, &s->spi[i], TYPE_IMX_SPI); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) qdev_get_gpio_in(gicdev, usdhc_table[i].irq)); } + /* USBs */ + for (i = 0; i < FSL_IMX8MM_NUM_USBS; i++) { + static const struct { + hwaddr addr; + unsigned int irq; + } usb_table[FSL_IMX8MM_NUM_USBS] = { + { fsl_imx8mm_memmap[FSL_IMX8MM_USB1].addr, FSL_IMX8MM_USB1_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_USB2].addr, FSL_IMX8MM_USB2_IRQ }, + }; + + qdev_prop_set_uint32(DEVICE(&s->usb[i].sysbus_xhci), "p2", 1); + qdev_prop_set_uint32(DEVICE(&s->usb[i].sysbus_xhci), "p3", 1); + qdev_prop_set_uint32(DEVICE(&s->usb[i].sysbus_xhci), "slots", 2); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->usb[i]), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->usb[i]), 0, usb_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->usb[i].sysbus_xhci), 0, + qdev_get_gpio_in(gicdev, usb_table[i].irq)); + } + /* ECSPIs */ for (i = 0; i < FSL_IMX8MM_NUM_ECSPIS; i++) { static const struct { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_OCRAM: case FSL_IMX8MM_SNVS_HP: case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4: + case FSL_IMX8MM_USB1 ... FSL_IMX8MM_USB2: case FSL_IMX8MM_USDHC1 ... FSL_IMX8MM_USDHC3: case FSL_IMX8MM_WDOG1 ... FSL_IMX8MM_WDOG3: /* device implemented and treated above */ diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/sd/sdhci.h" #include "hw/ssi/imx_spi.h" #include "hw/timer/imx_gpt.h" +#include "hw/usb/hcd-dwc3.h" #include "hw/watchdog/wdt_imx2.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ enum FslImx8mmConfiguration { FSL_IMX8MM_NUM_I2CS = 4, FSL_IMX8MM_NUM_IRQS = 128, FSL_IMX8MM_NUM_UARTS = 4, + FSL_IMX8MM_NUM_USBS = 2, FSL_IMX8MM_NUM_USDHCS = 3, FSL_IMX8MM_NUM_WDTS = 3, }; @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMXFECState enet; SDHCIState usdhc[FSL_IMX8MM_NUM_USDHCS]; IMX2WdtState wdt[FSL_IMX8MM_NUM_WDTS]; + USBDWC3 usb[FSL_IMX8MM_NUM_USBS]; DesignwarePCIEHost pcie; FslImx8mPciePhyState pcie_phy; OrIRQState gpt5_gpt6_irq; @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_I2C3_IRQ = 37, FSL_IMX8MM_I2C4_IRQ = 38, + FSL_IMX8MM_USB1_IRQ = 40, + FSL_IMX8MM_USB2_IRQ = 41, + FSL_IMX8MM_GPT1_IRQ = 55, FSL_IMX8MM_GPT2_IRQ = 54, FSL_IMX8MM_GPT3_IRQ = 53, -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> Added script that would validate the iMX8MM emulation by checking the linux console log. If it succeeds, it will return:- ok 1 test_imx8mm_evk.Imx8mmEvkMachine.test_aarch64_imx8mm_evk_usdhc Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Bernhard Beschow <shentey@gmail.com> [PMM: Add missing blank lines that flake8 wants] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 1 + tests/functional/aarch64/meson.build | 2 + tests/functional/aarch64/test_imx8mm_evk.py | 69 +++++++++++++++++++++ 3 files changed, 72 insertions(+) create mode 100755 tests/functional/aarch64/test_imx8mm_evk.py diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/arm/fsl-imx8mm.c F: hw/arm/imx8mm-evk.c F: include/hw/arm/fsl-imx8mm.h F: docs/system/arm/imx8m.rst +F: tests/functional/aarch64/test_imx8mm_evk.py MCIMX8MP-EVK / i.MX8MP M: Bernhard Beschow <shentey@gmail.com> diff --git a/tests/functional/aarch64/meson.build b/tests/functional/aarch64/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/functional/aarch64/meson.build +++ b/tests/functional/aarch64/meson.build @@ -XXX,XX +XXX,XX @@ test_aarch64_timeouts = { 'aspeed_ast2700a2' : 600, 'aspeed_ast2700fc' : 600, 'device_passthrough' : 720, + 'imx8mm_evk' : 240, 'imx8mp_evk' : 240, 'raspi4' : 480, 'reverse_debug' : 180, @@ -XXX,XX +XXX,XX @@ tests_aarch64_system_thorough = [ 'aspeed_ast2700fc', 'device_passthrough', 'hotplug_pci', + 'imx8mm_evk', 'imx8mp_evk', 'kvm', 'multiprocess', diff --git a/tests/functional/aarch64/test_imx8mm_evk.py b/tests/functional/aarch64/test_imx8mm_evk.py new file mode 100755 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/functional/aarch64/test_imx8mm_evk.py @@ -XXX,XX +XXX,XX @@ +#!/usr/bin/env python3 +# +# Functional test that boots a Linux kernel and checks the console +# +# SPDX-License-Identifier: GPL-2.0-or-later + +from qemu_test import LinuxKernelTest, Asset + + +class Imx8mmEvkMachine(LinuxKernelTest): + + ASSET_IMAGE = Asset( + ('https://cloud.debian.org/images/cloud/bookworm/20231210-1590/' + 'debian-12-generic-arm64-20231210-1590.tar.xz'), + '7ebf1577b32d5af6204df74b54ca2e4675de9b5a9fa14f3ff70b88eeb7b3b359') + + KERNEL_OFFSET = 0x51000000 + KERNEL_SIZE = 32622528 + INITRD_OFFSET = 0x76000000 + INITRD_SIZE = 30987766 + DTB_OFFSET = 0x64DB5000 + DTB_SIZE = 36812 + + def extract(self, in_path, out_path, offset, size): + try: + with open(in_path, "rb") as source: + source.seek(offset) + data = source.read(size) + with open(out_path, "wb") as target: + target.write(data) + except (IOError, ValueError) as e: + self.log.error(f"Failed to extract {out_path}: {e}") + raise + + def setUp(self): + super().setUp() + + self.image_path = self.scratch_file("disk.raw") + self.kernel_path = self.scratch_file("linux") + self.initrd_path = self.scratch_file("initrd.zstd") + self.dtb_path = self.scratch_file("imx8mm-evk.dtb") + + self.archive_extract(self.ASSET_IMAGE) + self.extract(self.image_path, self.kernel_path, + self.KERNEL_OFFSET, self.KERNEL_SIZE) + self.extract(self.image_path, self.initrd_path, + self.INITRD_OFFSET, self.INITRD_SIZE) + self.extract(self.image_path, self.dtb_path, + self.DTB_OFFSET, self.DTB_SIZE) + + def test_aarch64_imx8mm_evk_usdhc(self): + self.require_accelerator("tcg") + self.set_machine('imx8mm-evk') + self.vm.set_console(console_index=1) + self.vm.add_args('-m', '2G', + '-smp', '4', + '-kernel', self.kernel_path, + '-initrd', self.initrd_path, + '-dtb', self.dtb_path, + '-append', 'root=/dev/mmcblk2p1', + '-drive', f'file={self.image_path},if=sd,bus=2,' + 'format=raw,id=mmcblk2,snapshot=on') + + self.vm.launch() + self.wait_for_console_pattern('Welcome to ') + + +if __name__ == '__main__': + LinuxKernelTest.main() -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> As mentioned by Richard in [*]: We don't actually need any specific endianness here, because every byte has the same value. So we could simply drop MO_TE. That would produce a store in host-endianness, which will be fractionally more efficient on some hosts. [*] https://lore.kernel.org/qemu-devel/d64d3576-9188-4e74-afdc-3492c9feb8e0@linaro.org/ Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20260414005348.4767-2-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/helper-a64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/tcg/helper-a64.c b/target/arm/tcg/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/helper-a64.c +++ b/target/arm/tcg/helper-a64.c @@ -XXX,XX +XXX,XX @@ static uint64_t set_step_tags(CPUARMState *env, uint64_t toaddr, * the page dirty and will use the fast path. */ uint64_t repldata = data * 0x0101010101010101ULL; - MemOpIdx oi16 = make_memop_idx(MO_TE | MO_128, memidx); + MemOpIdx oi16 = make_memop_idx(MO_128, memidx); cpu_st16_mmu(env, toaddr, int128_make128(repldata, repldata), oi16, ra); mte_mops_set_tags(env, toaddr, 16, *mtedesc); return 16; -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Extract the implicit MO_TE definition in order to replace it in the next commit. Mechanical change using: $ for n in UW UL UQ UO SW SL SQ; do \ sed -i -e "s/MO_TE$n/MO_TE | MO_$n/" \ $(git grep -l MO_TE$n target/arm); \ done Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-3-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/m_helper.c | 6 +-- target/arm/tcg/mve_helper.c | 79 ++++++++++++++++++++----------------- 2 files changed, 45 insertions(+), 40 deletions(-) diff --git a/target/arm/tcg/m_helper.c b/target/arm/tcg/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/m_helper.c +++ b/target/arm/tcg/m_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest) /* Note that these stores can throw exceptions on MPU faults */ ARMMMUIdx mmu_idx = arm_mmu_idx(env); - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, arm_to_core_mmu_idx(mmu_idx)); cpu_stl_mmu(env, sp, nextinst, oi, GETPC()); cpu_stl_mmu(env, sp + 4, saved_psr, oi, GETPC()); @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) bool lspact = env->v7m.fpccr[s] & R_V7M_FPCCR_LSPACT_MASK; uintptr_t ra = GETPC(); ARMMMUIdx mmu_idx = arm_mmu_idx(env); - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, arm_to_core_mmu_idx(mmu_idx)); assert(env->v7m.secure); @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlldm)(CPUARMState *env, uint32_t fptr) ARMCPU *cpu = env_archcpu(env); uintptr_t ra = GETPC(); ARMMMUIdx mmu_idx = arm_mmu_idx(env); - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, arm_to_core_mmu_idx(mmu_idx)); /* fptr is the value of Rn, the frame pointer we load the FP regs from */ diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mve_helper.c +++ b/target/arm/tcg/mve_helper.c @@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env) } DO_VLDR(vldrb, MO_UB, 1, uint8_t, ldb, 1, uint8_t) -DO_VLDR(vldrh, MO_TEUW, 2, uint16_t, ldw, 2, uint16_t) -DO_VLDR(vldrw, MO_TEUL, 4, uint32_t, ldl, 4, uint32_t) +DO_VLDR(vldrh, MO_TE | MO_UW, 2, uint16_t, ldw, 2, uint16_t) +DO_VLDR(vldrw, MO_TE | MO_UL, 4, uint32_t, ldl, 4, uint32_t) DO_VSTR(vstrb, MO_UB, 1, stb, 1, uint8_t) -DO_VSTR(vstrh, MO_TEUW, 2, stw, 2, uint16_t) -DO_VSTR(vstrw, MO_TEUL, 4, stl, 4, uint32_t) +DO_VSTR(vstrh, MO_TE | MO_UW, 2, stw, 2, uint16_t) +DO_VSTR(vstrw, MO_TE | MO_UL, 4, stl, 4, uint32_t) DO_VLDR(vldrb_sh, MO_SB, 1, int8_t, ldb, 2, int16_t) DO_VLDR(vldrb_sw, MO_SB, 1, int8_t, ldb, 4, int32_t) DO_VLDR(vldrb_uh, MO_UB, 1, uint8_t, ldb, 2, uint16_t) DO_VLDR(vldrb_uw, MO_UB, 1, uint8_t, ldb, 4, uint32_t) -DO_VLDR(vldrh_sw, MO_TESW, 2, int16_t, ldw, 4, int32_t) -DO_VLDR(vldrh_uw, MO_TEUW, 2, uint16_t, ldw, 4, uint32_t) +DO_VLDR(vldrh_sw, MO_TE | MO_SW, 2, int16_t, ldw, 4, int32_t) +DO_VLDR(vldrh_uw, MO_TE | MO_UW, 2, uint16_t, ldw, 4, uint32_t) DO_VSTR(vstrb_h, MO_UB, 1, stb, 2, int16_t) DO_VSTR(vstrb_w, MO_UB, 1, stb, 4, int32_t) -DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t) +DO_VSTR(vstrh_w, MO_TE | MO_UW, 2, stw, 4, int32_t) #undef DO_VLDR #undef DO_VSTR @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (e = 0; e < 16 / 4; e++, mask >>= 4, eci_mask >>= 4) { \ if (!(eci_mask & 1)) { \ continue; \ @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (e = 0; e < 16 / 4; e++, mask >>= 4, eci_mask >>= 4) { \ if (!(eci_mask & 1)) { \ continue; \ @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t) DO_VLDR_SG(vldrb_sg_sh, MO_SB, int8_t, ldb, 2, int16_t, uint16_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_sw, MO_SB, int8_t, ldb, 4, int32_t, uint32_t, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_sw, MO_TESW, int16_t, ldw, 4, int32_t, uint32_t, ADDR_ADD, false) +DO_VLDR_SG(vldrh_sg_sw, MO_TE | MO_SW, int16_t, ldw, 4, + int32_t, uint32_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_ub, MO_UB, uint8_t, ldb, 1, uint8_t, uint8_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_uh, MO_UB, uint8_t, ldb, 2, uint16_t, uint16_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_uw, MO_UB, uint8_t, ldb, 4, uint32_t, uint32_t, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_uh, MO_TEUW, uint16_t, ldw, 2, uint16_t, uint16_t, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_uw, MO_TEUW, uint16_t, ldw, 4, uint32_t, uint32_t, ADDR_ADD, false) -DO_VLDR_SG(vldrw_sg_uw, MO_TEUL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD, false) +DO_VLDR_SG(vldrh_sg_uh, MO_TE | MO_UW, uint16_t, ldw, 2, + uint16_t, uint16_t, ADDR_ADD, false) +DO_VLDR_SG(vldrh_sg_uw, MO_TE | MO_UW, uint16_t, ldw, 4, + uint32_t, uint32_t, ADDR_ADD, false) +DO_VLDR_SG(vldrw_sg_uw, MO_TE | MO_UL, uint32_t, ldl, 4, + uint32_t, uint32_t, ADDR_ADD, false) DO_VLDR64_SG(vldrd_sg_ud, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_os_sw, MO_TESW, int16_t, ldw, 4, +DO_VLDR_SG(vldrh_sg_os_sw, MO_TE | MO_SW, int16_t, ldw, 4, int32_t, uint32_t, ADDR_ADD_OSH, false) -DO_VLDR_SG(vldrh_sg_os_uh, MO_TEUW, uint16_t, ldw, 2, +DO_VLDR_SG(vldrh_sg_os_uh, MO_TE | MO_UW, uint16_t, ldw, 2, uint16_t, uint16_t, ADDR_ADD_OSH, false) -DO_VLDR_SG(vldrh_sg_os_uw, MO_TEUW, uint16_t, ldw, 4, +DO_VLDR_SG(vldrh_sg_os_uw, MO_TE | MO_UW, uint16_t, ldw, 4, uint32_t, uint32_t, ADDR_ADD_OSH, false) -DO_VLDR_SG(vldrw_sg_os_uw, MO_TEUL, uint32_t, ldl, 4, +DO_VLDR_SG(vldrw_sg_os_uw, MO_TE | MO_UL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD_OSW, false) DO_VLDR64_SG(vldrd_sg_os_ud, ADDR_ADD_OSD, false) DO_VSTR_SG(vstrb_sg_ub, MO_UB, stb, 1, uint8_t, ADDR_ADD, false) DO_VSTR_SG(vstrb_sg_uh, MO_UB, stb, 2, uint16_t, ADDR_ADD, false) DO_VSTR_SG(vstrb_sg_uw, MO_UB, stb, 4, uint32_t, ADDR_ADD, false) -DO_VSTR_SG(vstrh_sg_uh, MO_TEUW, stw, 2, uint16_t, ADDR_ADD, false) -DO_VSTR_SG(vstrh_sg_uw, MO_TEUW, stw, 4, uint32_t, ADDR_ADD, false) -DO_VSTR_SG(vstrw_sg_uw, MO_TEUL, stl, 4, uint32_t, ADDR_ADD, false) +DO_VSTR_SG(vstrh_sg_uh, MO_TE | MO_UW, stw, 2, uint16_t, ADDR_ADD, false) +DO_VSTR_SG(vstrh_sg_uw, MO_TE | MO_UW, stw, 4, uint32_t, ADDR_ADD, false) +DO_VSTR_SG(vstrw_sg_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD, false) DO_VSTR64_SG(vstrd_sg_ud, ADDR_ADD, false) -DO_VSTR_SG(vstrh_sg_os_uh, MO_TEUW, stw, 2, uint16_t, ADDR_ADD_OSH, false) -DO_VSTR_SG(vstrh_sg_os_uw, MO_TEUW, stw, 4, uint32_t, ADDR_ADD_OSH, false) -DO_VSTR_SG(vstrw_sg_os_uw, MO_TEUL, stl, 4, uint32_t, ADDR_ADD_OSW, false) +DO_VSTR_SG(vstrh_sg_os_uh, MO_TE | MO_UW, stw, 2, uint16_t, ADDR_ADD_OSH, false) +DO_VSTR_SG(vstrh_sg_os_uw, MO_TE | MO_UW, stw, 4, uint32_t, ADDR_ADD_OSH, false) +DO_VSTR_SG(vstrw_sg_os_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD_OSW, false) DO_VSTR64_SG(vstrd_sg_os_ud, ADDR_ADD_OSD, false) -DO_VLDR_SG(vldrw_sg_wb_uw, MO_TEUL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD, true) +DO_VLDR_SG(vldrw_sg_wb_uw, MO_TE | MO_UL, uint32_t, ldl, 4, + uint32_t, uint32_t, ADDR_ADD, true) DO_VLDR64_SG(vldrd_sg_wb_ud, ADDR_ADD, true) -DO_VSTR_SG(vstrw_sg_wb_uw, MO_TEUL, stl, 4, uint32_t, ADDR_ADD, true) +DO_VSTR_SG(vstrw_sg_wb_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD, true) DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) /* @@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) static const uint8_t off[4] = { O1, O2, O3, O4 }; \ uint32_t addr, data; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) int y; /* y counts 0 2 0 2 */ \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0, y = 0; beat < 4; beat++, mask >>= 4, y ^= 2) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) uint32_t *qd; \ int y; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9) uint32_t addr, data; \ uint8_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9) int e; \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9) uint32_t addr, data; \ uint32_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20) static const uint8_t off[4] = { O1, O2, O3, O4 }; \ uint32_t addr, data; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20) int y; /* y counts 0 2 0 2 */ \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0, y = 0; beat < 4; beat++, mask >>= 4, y ^= 2) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20) uint32_t *qd; \ int y; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9) uint32_t addr, data; \ uint8_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9) int e; \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9) uint32_t addr, data; \ uint32_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-4-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/mve_helper.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mve_helper.c +++ b/target/arm/tcg/mve_helper.c @@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env) uint16_t eci_mask = mve_eci_mask(env); \ unsigned b, e; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MFLAG | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + mmu_idx); \ /* \ * R_SXTM allows the dest reg to become UNKNOWN for abandoned \ * beats so we don't care if we update part of the dest and \ @@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env) uint16_t mask = mve_element_mask(env); \ unsigned b, e; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MFLAG | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + mmu_idx); \ for (b = 0, e = 0; b < 16; b += ESIZE, e++) { \ if (mask & (1 << b)) { \ cpu_##STTYPE##_mmu(env, addr, d[H##ESIZE(e)], oi, GETPC()); \ @@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env) } DO_VLDR(vldrb, MO_UB, 1, uint8_t, ldb, 1, uint8_t) -DO_VLDR(vldrh, MO_TE | MO_UW, 2, uint16_t, ldw, 2, uint16_t) -DO_VLDR(vldrw, MO_TE | MO_UL, 4, uint32_t, ldl, 4, uint32_t) +DO_VLDR(vldrh, MO_UW, 2, uint16_t, ldw, 2, uint16_t) +DO_VLDR(vldrw, MO_UL, 4, uint32_t, ldl, 4, uint32_t) DO_VSTR(vstrb, MO_UB, 1, stb, 1, uint8_t) -DO_VSTR(vstrh, MO_TE | MO_UW, 2, stw, 2, uint16_t) -DO_VSTR(vstrw, MO_TE | MO_UL, 4, stl, 4, uint32_t) +DO_VSTR(vstrh, MO_UW, 2, stw, 2, uint16_t) +DO_VSTR(vstrw, MO_UL, 4, stl, 4, uint32_t) DO_VLDR(vldrb_sh, MO_SB, 1, int8_t, ldb, 2, int16_t) DO_VLDR(vldrb_sw, MO_SB, 1, int8_t, ldb, 4, int32_t) DO_VLDR(vldrb_uh, MO_UB, 1, uint8_t, ldb, 2, uint16_t) DO_VLDR(vldrb_uw, MO_UB, 1, uint8_t, ldb, 4, uint32_t) -DO_VLDR(vldrh_sw, MO_TE | MO_SW, 2, int16_t, ldw, 4, int32_t) -DO_VLDR(vldrh_uw, MO_TE | MO_UW, 2, uint16_t, ldw, 4, uint32_t) +DO_VLDR(vldrh_sw, MO_SW, 2, int16_t, ldw, 4, int32_t) +DO_VLDR(vldrh_uw, MO_UW, 2, uint16_t, ldw, 4, uint32_t) DO_VSTR(vstrb_h, MO_UB, 1, stb, 2, int16_t) DO_VSTR(vstrb_w, MO_UB, 1, stb, 4, int32_t) -DO_VSTR(vstrh_w, MO_TE | MO_UW, 2, stw, 4, int32_t) +DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) #undef DO_VLDR #undef DO_VSTR -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-5-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/mve_helper.c | 43 +++++++++++++++++-------------------- 1 file changed, 20 insertions(+), 23 deletions(-) diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mve_helper.c +++ b/target/arm/tcg/mve_helper.c @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MFLAG | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + mmu_idx); \ for (e = 0; e < 16 / ESIZE; e++, mask >>= ESIZE, eci_mask >>= ESIZE) { \ if (!(eci_mask & 1)) { \ continue; \ @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MFLAG | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + mmu_idx); \ for (e = 0; e < 16 / ESIZE; e++, mask >>= ESIZE, eci_mask >>= ESIZE) { \ if (!(eci_mask & 1)) { \ continue; \ @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) DO_VLDR_SG(vldrb_sg_sh, MO_SB, int8_t, ldb, 2, int16_t, uint16_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_sw, MO_SB, int8_t, ldb, 4, int32_t, uint32_t, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_sw, MO_TE | MO_SW, int16_t, ldw, 4, - int32_t, uint32_t, ADDR_ADD, false) +DO_VLDR_SG(vldrh_sg_sw, MO_SW, int16_t, ldw, 4, int32_t, uint32_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_ub, MO_UB, uint8_t, ldb, 1, uint8_t, uint8_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_uh, MO_UB, uint8_t, ldb, 2, uint16_t, uint16_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_uw, MO_UB, uint8_t, ldb, 4, uint32_t, uint32_t, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_uh, MO_TE | MO_UW, uint16_t, ldw, 2, - uint16_t, uint16_t, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_uw, MO_TE | MO_UW, uint16_t, ldw, 4, - uint32_t, uint32_t, ADDR_ADD, false) -DO_VLDR_SG(vldrw_sg_uw, MO_TE | MO_UL, uint32_t, ldl, 4, - uint32_t, uint32_t, ADDR_ADD, false) +DO_VLDR_SG(vldrh_sg_uh, MO_UW, uint16_t, ldw, 2, uint16_t, uint16_t, ADDR_ADD, false) +DO_VLDR_SG(vldrh_sg_uw, MO_UW, uint16_t, ldw, 4, uint32_t, uint32_t, ADDR_ADD, false) +DO_VLDR_SG(vldrw_sg_uw, MO_UL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD, false) DO_VLDR64_SG(vldrd_sg_ud, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_os_sw, MO_TE | MO_SW, int16_t, ldw, 4, +DO_VLDR_SG(vldrh_sg_os_sw, MO_SW, int16_t, ldw, 4, int32_t, uint32_t, ADDR_ADD_OSH, false) -DO_VLDR_SG(vldrh_sg_os_uh, MO_TE | MO_UW, uint16_t, ldw, 2, +DO_VLDR_SG(vldrh_sg_os_uh, MO_UW, uint16_t, ldw, 2, uint16_t, uint16_t, ADDR_ADD_OSH, false) -DO_VLDR_SG(vldrh_sg_os_uw, MO_TE | MO_UW, uint16_t, ldw, 4, +DO_VLDR_SG(vldrh_sg_os_uw, MO_UW, uint16_t, ldw, 4, uint32_t, uint32_t, ADDR_ADD_OSH, false) -DO_VLDR_SG(vldrw_sg_os_uw, MO_TE | MO_UL, uint32_t, ldl, 4, +DO_VLDR_SG(vldrw_sg_os_uw, MO_UL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD_OSW, false) DO_VLDR64_SG(vldrd_sg_os_ud, ADDR_ADD_OSD, false) DO_VSTR_SG(vstrb_sg_ub, MO_UB, stb, 1, uint8_t, ADDR_ADD, false) DO_VSTR_SG(vstrb_sg_uh, MO_UB, stb, 2, uint16_t, ADDR_ADD, false) DO_VSTR_SG(vstrb_sg_uw, MO_UB, stb, 4, uint32_t, ADDR_ADD, false) -DO_VSTR_SG(vstrh_sg_uh, MO_TE | MO_UW, stw, 2, uint16_t, ADDR_ADD, false) -DO_VSTR_SG(vstrh_sg_uw, MO_TE | MO_UW, stw, 4, uint32_t, ADDR_ADD, false) -DO_VSTR_SG(vstrw_sg_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD, false) +DO_VSTR_SG(vstrh_sg_uh, MO_UW, stw, 2, uint16_t, ADDR_ADD, false) +DO_VSTR_SG(vstrh_sg_uw, MO_UW, stw, 4, uint32_t, ADDR_ADD, false) +DO_VSTR_SG(vstrw_sg_uw, MO_UL, stl, 4, uint32_t, ADDR_ADD, false) DO_VSTR64_SG(vstrd_sg_ud, ADDR_ADD, false) -DO_VSTR_SG(vstrh_sg_os_uh, MO_TE | MO_UW, stw, 2, uint16_t, ADDR_ADD_OSH, false) -DO_VSTR_SG(vstrh_sg_os_uw, MO_TE | MO_UW, stw, 4, uint32_t, ADDR_ADD_OSH, false) -DO_VSTR_SG(vstrw_sg_os_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD_OSW, false) +DO_VSTR_SG(vstrh_sg_os_uh, MO_UW, stw, 2, uint16_t, ADDR_ADD_OSH, false) +DO_VSTR_SG(vstrh_sg_os_uw, MO_UW, stw, 4, uint32_t, ADDR_ADD_OSH, false) +DO_VSTR_SG(vstrw_sg_os_uw, MO_UL, stl, 4, uint32_t, ADDR_ADD_OSW, false) DO_VSTR64_SG(vstrd_sg_os_ud, ADDR_ADD_OSD, false) -DO_VLDR_SG(vldrw_sg_wb_uw, MO_TE | MO_UL, uint32_t, ldl, 4, - uint32_t, uint32_t, ADDR_ADD, true) +DO_VLDR_SG(vldrw_sg_wb_uw, MO_UL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD, true) DO_VLDR64_SG(vldrd_sg_wb_ud, ADDR_ADD, true) -DO_VSTR_SG(vstrw_sg_wb_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD, true) +DO_VSTR_SG(vstrw_sg_wb_uw, MO_UL, stl, 4, uint32_t, ADDR_ADD, true) DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) /* -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-6-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 6 ++++++ target/arm/tcg/mve_helper.c | 3 ++- 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ #include "exec/hwaddr.h" #include "exec/vaddr.h" #include "exec/breakpoint.h" +#include "exec/memop.h" #include "accel/tcg/tb-cpu-state.h" #include "hw/core/registerfields.h" #include "tcg/tcg-gvec-desc.h" @@ -XXX,XX +XXX,XX @@ #define BANK_HYP 6 #define BANK_MON 7 +static inline MemOp mo_endian(CPUARMState *env) +{ + return EX_TBFLAG_ANY(env->hflags, BE_DATA) ? MO_BE : MO_LE; +} + static inline int arm_env_mmu_index(CPUARMState *env) { return EX_TBFLAG_ANY(env->hflags, MMUIDX); diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mve_helper.c +++ b/target/arm/tcg/mve_helper.c @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (e = 0; e < 16 / 4; e++, mask >>= 4, eci_mask >>= 4) { \ if (!(eci_mask & 1)) { \ continue; \ -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-7-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/mve_helper.c | 47 +++++++++++++++++++++++-------------- 1 file changed, 30 insertions(+), 17 deletions(-) diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mve_helper.c +++ b/target/arm/tcg/mve_helper.c @@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env) uint16_t eci_mask = mve_eci_mask(env); \ unsigned b, e; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MFLAG | MO_ALIGN, \ mmu_idx); \ /* \ * R_SXTM allows the dest reg to become UNKNOWN for abandoned \ @@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env) uint16_t mask = mve_element_mask(env); \ unsigned b, e; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MFLAG | MO_ALIGN, \ mmu_idx); \ for (b = 0, e = 0; b < 16; b += ESIZE, e++) { \ if (mask & (1 << b)) { \ @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MFLAG | MO_ALIGN, \ mmu_idx); \ for (e = 0; e < 16 / ESIZE; e++, mask >>= ESIZE, eci_mask >>= ESIZE) { \ if (!(eci_mask & 1)) { \ @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MFLAG | MO_ALIGN, \ mmu_idx); \ for (e = 0; e < 16 / ESIZE; e++, mask >>= ESIZE, eci_mask >>= ESIZE) { \ if (!(eci_mask & 1)) { \ @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (e = 0; e < 16 / 4; e++, mask >>= 4, eci_mask >>= 4) { \ if (!(eci_mask & 1)) { \ continue; \ @@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) static const uint8_t off[4] = { O1, O2, O3, O4 }; \ uint32_t addr, data; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) int y; /* y counts 0 2 0 2 */ \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0, y = 0; beat < 4; beat++, mask >>= 4, y ^= 2) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) uint32_t *qd; \ int y; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9) uint32_t addr, data; \ uint8_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9) int e; \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9) uint32_t addr, data; \ uint32_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20) static const uint8_t off[4] = { O1, O2, O3, O4 }; \ uint32_t addr, data; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20) int y; /* y counts 0 2 0 2 */ \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0, y = 0; beat < 4; beat++, mask >>= 4, y ^= 2) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20) uint32_t *qd; \ int y; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9) uint32_t addr, data; \ uint8_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9) int e; \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9) uint32_t addr, data; \ uint32_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-8-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/meson.build | 3 ++- target/arm/tcg/mve_helper.c | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/target/arm/tcg/meson.build b/target/arm/tcg/meson.build index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/meson.build +++ b/target/arm/tcg/meson.build @@ -XXX,XX +XXX,XX @@ arm_ss.add(when: 'TARGET_AARCH64', if_false: files('stubs32.c')) arm_ss.add(files( 'cpu32.c', 'm_helper.c', - 'mve_helper.c', )) arm_ss.add(when: 'TARGET_AARCH64', if_true: files( @@ -XXX,XX +XXX,XX @@ arm_common_system_ss.add( 'debug.c', 'hflags.c', 'gengvec.c', + 'mve_helper.c', 'neon_helper.c', 'op_helper.c', 'psci.c', @@ -XXX,XX +XXX,XX @@ arm_user_ss.add( 'debug.c', 'gengvec.c', 'hflags.c', + 'mve_helper.c', 'neon_helper.c', 'op_helper.c', 'tlb_helper.c', diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mve_helper.c +++ b/target/arm/tcg/mve_helper.c @@ -XXX,XX +XXX,XX @@ #include "helper-mve.h" #include "internals.h" #include "vec_internal.h" -#include "accel/tcg/cpu-ldst.h" +#include "accel/tcg/cpu-ldst-common.h" #include "tcg/tcg.h" #include "fpu/softfloat.h" #include "crypto/clmul.h" -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-9-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/m_helper.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/target/arm/tcg/m_helper.c b/target/arm/tcg/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/m_helper.c +++ b/target/arm/tcg/m_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest) /* Note that these stores can throw exceptions on MPU faults */ ARMMMUIdx mmu_idx = arm_mmu_idx(env); - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, arm_to_core_mmu_idx(mmu_idx)); cpu_stl_mmu(env, sp, nextinst, oi, GETPC()); cpu_stl_mmu(env, sp + 4, saved_psr, oi, GETPC()); @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) bool lspact = env->v7m.fpccr[s] & R_V7M_FPCCR_LSPACT_MASK; uintptr_t ra = GETPC(); ARMMMUIdx mmu_idx = arm_mmu_idx(env); - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, arm_to_core_mmu_idx(mmu_idx)); assert(env->v7m.secure); @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlldm)(CPUARMState *env, uint32_t fptr) ARMCPU *cpu = env_archcpu(env); uintptr_t ra = GETPC(); ARMMMUIdx mmu_idx = arm_mmu_idx(env); - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, arm_to_core_mmu_idx(mmu_idx)); /* fptr is the value of Rn, the frame pointer we load the FP regs from */ -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-10-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/m_helper.c | 2 +- target/arm/tcg/meson.build | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/target/arm/tcg/m_helper.c b/target/arm/tcg/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/m_helper.c +++ b/target/arm/tcg/m_helper.c @@ -XXX,XX +XXX,XX @@ #include "qemu/log.h" #include "exec/page-protection.h" #ifdef CONFIG_TCG -#include "accel/tcg/cpu-ldst.h" +#include "accel/tcg/cpu-ldst-common.h" #include "semihosting/common-semi.h" #endif #if !defined(CONFIG_USER_ONLY) diff --git a/target/arm/tcg/meson.build b/target/arm/tcg/meson.build index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/meson.build +++ b/target/arm/tcg/meson.build @@ -XXX,XX +XXX,XX @@ arm_ss.add(when: 'TARGET_AARCH64', if_false: files('stubs32.c')) arm_ss.add(files( 'cpu32.c', - 'm_helper.c', )) arm_ss.add(when: 'TARGET_AARCH64', if_true: files( @@ -XXX,XX +XXX,XX @@ arm_common_system_ss.add( 'debug.c', 'hflags.c', 'gengvec.c', + 'm_helper.c', 'mve_helper.c', 'neon_helper.c', 'op_helper.c', @@ -XXX,XX +XXX,XX @@ arm_user_ss.add( 'debug.c', 'gengvec.c', 'hflags.c', + 'm_helper.c', 'mve_helper.c', 'neon_helper.c', 'op_helper.c', -- 2.43.0 From: Thomas Huth <thuth@redhat.com> When writing to this register, QEMU currently aborts: $ echo "readl 0x10000018" | ./qemu-system-arm -audiodev none,id=snd0 \ -M integratorcp,accel=qtest,audiodev=snd0 -display none -qtest stdio [I 0.000000] OPENED [R +0.001907] readl 0x10000018 qemu: hardware error: integratorcm_read: CM_LMBUSCNT [...] Aborted (core dumped) This is bad, a guest should ideally never be able to kill QEMU like this. Now, according to the "Intergrator/CP User Guide" from: https://developer.arm.com/documentation/dui0159/b/porting-integrator-ap-and-im-pd1/registers "The Integrator/AP CM_LMBUSCNT has been removed." That means this register does not seem to be implemented on real CP boards at all, only for older AP boards. Thus it should be fine if we simply ignore this register in QEMU and handle it like all other unimplemented registers in the "default" handler of the case statement. Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3407 Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20260420064933.64765-1-thuth@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/integratorcp.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/hw/arm/integratorcp.c b/hw/arm/integratorcp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/integratorcp.c +++ b/hw/arm/integratorcp.c @@ -XXX,XX +XXX,XX @@ static uint64_t integratorcm_read(void *opaque, hwaddr offset, } else { return s->cm_lock; } - case 6: /* CM_LMBUSCNT */ - /* ??? High frequency timer. */ - hw_error("integratorcm_read: CM_LMBUSCNT"); case 7: /* CM_AUXOSC */ return s->cm_auxosc; case 8: /* CM_SDRAM */ -- 2.43.0 include/hw/arm/primecell.h used to be more expansive, but now the only thing it defines is the ARM_SYSCTL_GPIO_* constants for the GPIO lines for the arm-sysctl system-control device used on the Realview, Versatile and Versatile Express boards. Replace it with a header file specific to that device. virt.c and vmapple.c included primecell.h despite not using the constants it defined; there we can simply drop the include entirely. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20260416172627.690396-1-peter.maydell@linaro.org --- MAINTAINERS | 2 +- hw/arm/realview.c | 2 +- hw/arm/vexpress.c | 2 +- hw/arm/virt.c | 1 - hw/misc/arm_sysctl.c | 2 +- hw/vmapple/vmapple.c | 1 - include/hw/arm/primecell.h | 12 ------------ include/hw/misc/arm_sysctl.h | 16 ++++++++++++++++ 8 files changed, 20 insertions(+), 18 deletions(-) delete mode 100644 include/hw/arm/primecell.h create mode 100644 include/hw/misc/arm_sysctl.h diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/ssi/pl022.c F: include/hw/ssi/pl022.h F: hw/rtc/pl031.c F: include/hw/rtc/pl031.h -F: include/hw/arm/primecell.h F: hw/timer/cmsdk-apb-timer.c F: include/hw/timer/cmsdk-apb-timer.h F: tests/qtest/cmsdk-apb-timer-test.c @@ -XXX,XX +XXX,XX @@ F: hw/*/versatile* F: hw/i2c/arm_sbcon_i2c.c F: include/hw/i2c/arm_sbcon_i2c.h F: hw/misc/arm_sysctl.c +F: include/hw/misc/arm_sysctl.h F: docs/system/arm/versatile.rst Virt diff --git a/hw/arm/realview.c b/hw/arm/realview.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/realview.c +++ b/hw/arm/realview.c @@ -XXX,XX +XXX,XX @@ #include "target/arm/cpu.h" #include "hw/core/sysbus.h" #include "hw/arm/boot.h" -#include "hw/arm/primecell.h" #include "hw/arm/machines-qom.h" #include "hw/core/split-irq.h" +#include "hw/misc/arm_sysctl.h" #include "hw/net/lan9118.h" #include "hw/net/smc91c111.h" #include "hw/pci/pci.h" diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/vexpress.c +++ b/hw/arm/vexpress.c @@ -XXX,XX +XXX,XX @@ #include "qemu/datadir.h" #include "hw/core/sysbus.h" #include "hw/arm/boot.h" -#include "hw/arm/primecell.h" #include "hw/arm/machines-qom.h" +#include "hw/misc/arm_sysctl.h" #include "hw/net/lan9118.h" #include "hw/i2c/i2c.h" #include "net/net.h" diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ #include "monitor/qdev.h" #include "hw/core/sysbus.h" #include "hw/arm/boot.h" -#include "hw/arm/primecell.h" #include "hw/arm/virt.h" #include "hw/arm/machines-qom.h" #include "hw/block/flash.h" diff --git a/hw/misc/arm_sysctl.c b/hw/misc/arm_sysctl.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/arm_sysctl.c +++ b/hw/misc/arm_sysctl.c @@ -XXX,XX +XXX,XX @@ #include "system/runstate.h" #include "qemu/bitops.h" #include "hw/core/sysbus.h" +#include "hw/misc/arm_sysctl.h" #include "migration/vmstate.h" -#include "hw/arm/primecell.h" #include "qemu/log.h" #include "qemu/module.h" #include "qom/object.h" diff --git a/hw/vmapple/vmapple.c b/hw/vmapple/vmapple.c index XXXXXXX..XXXXXXX 100644 --- a/hw/vmapple/vmapple.c +++ b/hw/vmapple/vmapple.c @@ -XXX,XX +XXX,XX @@ #include "hw/core/sysbus.h" #include "hw/usb/usb.h" #include "hw/arm/boot.h" -#include "hw/arm/primecell.h" #include "hw/char/pl011.h" #include "hw/intc/arm_gic.h" #include "hw/intc/arm_gicv3_common.h" diff --git a/include/hw/arm/primecell.h b/include/hw/arm/primecell.h deleted file mode 100644 index XXXXXXX..XXXXXXX --- a/include/hw/arm/primecell.h +++ /dev/null @@ -XXX,XX +XXX,XX @@ -#ifndef PRIMECELL_H -#define PRIMECELL_H - -/* Declarations for ARM PrimeCell based periperals. */ -/* Also includes some devices that are currently only used by the - ARM boards. */ - -/* arm_sysctl GPIO lines */ -#define ARM_SYSCTL_GPIO_MMC_WPROT 0 -#define ARM_SYSCTL_GPIO_MMC_CARDIN 1 - -#endif diff --git a/include/hw/misc/arm_sysctl.h b/include/hw/misc/arm_sysctl.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/arm_sysctl.h @@ -XXX,XX +XXX,XX @@ +/* + * Status and system control registers for ARM RealView/Versatile boards. + * + * Copyright (c) Linaro Ltd + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#ifndef HW_MISC_ARM_SYSCTL_H +#define HW_MISC_ARM_SYSCTL_H + +/* arm_sysctl inbound GPIO lines */ +#define ARM_SYSCTL_GPIO_MMC_WPROT 0 +#define ARM_SYSCTL_GPIO_MMC_CARDIN 1 + +#endif -- 2.43.0 If we create a normally-AArch64 CPU and configure it with aarch64=off, this will by default leave all the AArch64 ID register values in its ARMISARegisters struct untouched. That in turn means that tests of cpu_isar_feature(aa64_something, cpu) will return true. Until now we have had a design policy that you shouldn't check an aa64_ feature unless you know that the CPU has AArch64; but this is quite fragile as it's easy to forget and only causes a problem in the corner case where AArch64 was turned off. In particular, when we extend the ability to disable AArch64 from only KVM to also TCG there are many more aa64 feature check points which we would otherwise have to audit for whether they needed to be guarded with a check on ARM_FEATURE_AARCH64. Instead, make the CPU realize function zero out all the 64-bit ID registers if a TCG CPU doesn't have AArch64; this will make aa64_ feature tests generally return false. We only do this for TCG because only TCG really needs it, and for KVM it might be confusing to have QEMU's idea of the ID registers be different from KVM's. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260416165353.589569-2-peter.maydell@linaro.org --- target/arm/cpu.c | 35 +++++++++++++++++++++++++++++++++++ target/arm/cpu.h | 3 ++- 2 files changed, 37 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ void arm_cpu_finalize_features(ARMCPU *cpu, Error **errp) } } +static void arm_clear_aarch64_idregs(ARMCPU *cpu) +{ + /* Zero out all the AArch64 ID registers in ARMISARegisters */ + SET_IDREG(&cpu->isar, ID_AA64ISAR0, 0); + SET_IDREG(&cpu->isar, ID_AA64ISAR1, 0); + SET_IDREG(&cpu->isar, ID_AA64ISAR2, 0); + SET_IDREG(&cpu->isar, ID_AA64PFR0, 0); + SET_IDREG(&cpu->isar, ID_AA64PFR1, 0); + SET_IDREG(&cpu->isar, ID_AA64PFR2, 0); + SET_IDREG(&cpu->isar, ID_AA64MMFR0, 0); + SET_IDREG(&cpu->isar, ID_AA64MMFR1, 0); + SET_IDREG(&cpu->isar, ID_AA64MMFR2, 0); + SET_IDREG(&cpu->isar, ID_AA64MMFR3, 0); + SET_IDREG(&cpu->isar, ID_AA64DFR0, 0); + SET_IDREG(&cpu->isar, ID_AA64DFR1, 0); + SET_IDREG(&cpu->isar, ID_AA64AFR0, 0); + SET_IDREG(&cpu->isar, ID_AA64AFR1, 0); + SET_IDREG(&cpu->isar, ID_AA64ZFR0, 0); + SET_IDREG(&cpu->isar, ID_AA64SMFR0, 0); +} + static void arm_cpu_realizefn(DeviceState *dev, Error **errp) { CPUState *cs = CPU(dev); @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) } #endif + /* + * A TCG aarch64=off CPU has no AArch64 at all, so we clear out the + * ID registers to avoid cpu_isar_feature(aa64_something, cpu) tests + * incorrectly returning true. We don't do this for other accelerators + * (which in practice means "for KVM", since no others have AArch32 + * guest support) because from KVM's point of view the AArch64 ID + * registers still exist and must have their correct values. So we + * avoid clearing them out so that we don't have QEMU and KVM with + * different ideas of the ID registers. + */ + if (tcg_enabled() && !arm_feature(env, ARM_FEATURE_AARCH64)) { + arm_clear_aarch64_idregs(cpu); + } + #ifdef CONFIG_USER_ONLY /* * User mode relies on IC IVAU instructions to catch modification of diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ArchCPU { * Note that if you add an ID register to the ARMISARegisters struct * you need to also update the 32-bit and 64-bit versions of the * kvm_arm_get_host_cpu_features() function to correctly populate the - * field by reading the value from the KVM vCPU. + * field by reading the value from the KVM vCPU. If it is an AArch64 + * ID register then you also must update arm_clear_aarch64_idregs(). */ struct ARMISARegisters { uint32_t mvfr0; -- 2.43.0 Allow the 'aarch64=off' property, which is currently KVM-only, to be set for TCG CPUs also. Note that we don't permit it on the qemu-aarch64 user-mode binary: this makes no sense as that executable can only handle AArch64 syscalls (and it would also assert at startup since it doesn't compile in the A32-specific GDB xml files like arm-neon.xml). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Clément Chigot <chigot@adacore.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20260416165353.589569-3-peter.maydell@linaro.org --- docs/system/arm/cpu-features.rst | 10 +++++---- target/arm/cpu-features.h | 5 +++++ target/arm/cpu.c | 36 ++++++++++++++++++++++++++++---- tests/qtest/arm-cpu-features.c | 8 ++----- 4 files changed, 45 insertions(+), 14 deletions(-) diff --git a/docs/system/arm/cpu-features.rst b/docs/system/arm/cpu-features.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/cpu-features.rst +++ b/docs/system/arm/cpu-features.rst @@ -XXX,XX +XXX,XX @@ not implement ARMv8-A, will not have the ``aarch64`` CPU property. QEMU's support may be limited for some CPU features, only partially supporting the feature or only supporting the feature under certain configurations. For example, the ``aarch64`` CPU feature, which, when -disabled, enables the optional AArch32 CPU feature, is only supported -when using the KVM accelerator and when running on a host CPU type that -supports the feature. While ``aarch64`` currently only works with KVM, -it could work with TCG. CPU features that are specific to KVM are +disabled, enables the optional AArch32 CPU feature, can only be set to +``off`` on the TCG and KVM accelerators, and it cannot be set to +``off`` under KVM unless running on a host CPU type that supports +running guests in AArch32. + +CPU features that are inherently specific to KVM are prefixed with "kvm-" and are described in "KVM VCPU Features". CPU Feature Probing diff --git a/target/arm/cpu-features.h b/target/arm/cpu-features.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu-features.h +++ b/target/arm/cpu-features.h @@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa64_aa32_el2(const ARMISARegisters *id) return FIELD_EX64_IDREG(id, ID_AA64PFR0, EL2) >= 2; } +static inline bool isar_feature_aa64_aa32_el3(const ARMISARegisters *id) +{ + return FIELD_EX64_IDREG(id, ID_AA64PFR0, EL3) >= 2; +} + static inline bool isar_feature_aa64_ras(const ARMISARegisters *id) { return FIELD_EX64_IDREG(id, ID_AA64PFR0, RAS) != 0; diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void aarch64_cpu_set_aarch64(Object *obj, bool value, Error **errp) * uniform execution state like do_interrupt. */ if (value == false) { - if (!kvm_enabled() || !kvm_arm_aarch32_supported()) { - error_setg(errp, "'aarch64' feature cannot be disabled " - "unless KVM is enabled and 32-bit EL1 " - "is supported"); + if (kvm_enabled()) { + if (!kvm_arm_aarch32_supported()) { + error_setg(errp, "'aarch64' feature cannot be disabled for KVM " + "because this host does not support 32-bit EL1"); + return; + } + } else if (tcg_enabled()) { +#ifdef CONFIG_USER_ONLY + error_setg(errp, "'aarch64' feature cannot be disabled for " + "usermode emulator qemu-aarch64; use qemu-arm instead"); + return; +#else + bool aa32_at_highest_el; + if (arm_feature(&cpu->env, ARM_FEATURE_EL3)) { + aa32_at_highest_el = cpu_isar_feature(aa64_aa32_el3, cpu); + } else if (arm_feature(&cpu->env, ARM_FEATURE_EL2)) { + aa32_at_highest_el = cpu_isar_feature(aa64_aa32_el2, cpu); + } else { + aa32_at_highest_el = cpu_isar_feature(aa64_aa32_el1, cpu); + } + + if (!aa32_at_highest_el) { + error_setg(errp, "'aarch64' feature cannot be disabled for " + "this TCG CPU because it does not support 32-bit " + "execution at its highest implemented exception " + "level"); + return; + } +#endif + } else { + error_setg(errp, "'aarch64' feature cannot be disabled for " + "this accelerator"); return; } unset_feature(&cpu->env, ARM_FEATURE_AARCH64); diff --git a/tests/qtest/arm-cpu-features.c b/tests/qtest/arm-cpu-features.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/arm-cpu-features.c +++ b/tests/qtest/arm-cpu-features.c @@ -XXX,XX +XXX,XX @@ static void test_query_cpu_model_expansion(const void *data) sve_tests_default(qts, "max"); pauth_tests_default(qts, "max"); - /* Test that features that depend on KVM generate errors without. */ - assert_error(qts, "max", - "'aarch64' feature cannot be disabled " - "unless KVM is enabled and 32-bit EL1 " - "is supported", - "{ 'aarch64': false }"); + /* TCG allows us to turn off AArch64 on the 'max' CPU type */ + assert_set_feature(qts, "max", "aarch64", false); } qtest_quit(qts); -- 2.43.0 Add a basic test of the TCG 'aarch64=off' functionality; this is the same as our existing arm/test_virt test, but it runs the AArch32 guest kernel on qemu-system-aarch64 with -cpu max,aarch64=off. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20260416165353.589569-4-peter.maydell@linaro.org --- tests/functional/aarch64/meson.build | 1 + .../aarch64/test_virt_aarch64_off.py | 37 +++++++++++++++++++ 2 files changed, 38 insertions(+) create mode 100755 tests/functional/aarch64/test_virt_aarch64_off.py diff --git a/tests/functional/aarch64/meson.build b/tests/functional/aarch64/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/functional/aarch64/meson.build +++ b/tests/functional/aarch64/meson.build @@ -XXX,XX +XXX,XX @@ tests_aarch64_system_thorough = [ 'tcg_plugins', 'tuxrun', 'virt', + 'virt_aarch64_off', 'virt_gpu', 'virt_vbsa', 'xen', diff --git a/tests/functional/aarch64/test_virt_aarch64_off.py b/tests/functional/aarch64/test_virt_aarch64_off.py new file mode 100755 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/functional/aarch64/test_virt_aarch64_off.py @@ -XXX,XX +XXX,XX @@ +#!/usr/bin/env python3 +# +# Functional test that boots an AArch32 Linux kernel and checks the console +# on a TCG aarch64 CPU with aarch64=off. This is the same image etc +# as we use in tests/functional/arm/test_virt.py. +# +# SPDX-License-Identifier: GPL-2.0-or-later + +from qemu_test import LinuxKernelTest, Asset + +class ArmVirtMachine(LinuxKernelTest): + + ASSET_KERNEL = Asset( + ('https://archives.fedoraproject.org/pub/archive/fedora/linux/' + 'releases/29/Everything/armhfp/os/images/pxeboot/vmlinuz'), + '18dd5f1a9a28bd539f9d047f7c0677211bae528e8712b40ca5a229a4ad8e2591') + + def test_arm_virt(self): + self.set_machine('virt') + # KVM aarch64=off requires a host CPU that supports it, so + # restrict the test to TCG only + self.require_accelerator('tcg') + self.vm.add_args('-cpu', 'max,aarch64=off') + + kernel_path = self.ASSET_KERNEL.fetch() + + self.vm.set_console() + kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE + + 'console=ttyAMA0') + self.vm.add_args('-kernel', kernel_path, + '-append', kernel_command_line) + self.vm.launch() + console_pattern = 'Kernel command line: %s' % kernel_command_line + self.wait_for_console_pattern(console_pattern) + +if __name__ == '__main__': + LinuxKernelTest.main() -- 2.43.0 From: Eric Auger <eric.auger@redhat.com> We introduce a datatype for a tolerance with respect to a given cpreg migration issue. The tolerance applies to a given cpreg kvm index, and can be of different types: a) mismatch in cpreg indexes - ToleranceNotOnBothEnds (cpreg index is allowed to be only present on one end) - ToleranceOnlySrcTestValue (cpreg index is allowed to be only present in source if its value @mask field matches @value) b) mismatch in cpreg values - ToleranceDiffInMask (value differences are allowed only within a mask) - ToleranceFieldLT (incoming field value must be less than a given value) - ToleranceFieldGT (incoming field value must be greater than a given value) A QLIST of such tolerances can be populated using a new helper: arm_register_cpreg_mig_tolerance() and arm_cpu_match_cpreg_mig_tolerance() allows to check whether a tolerance exists for a given kvm index and its criterion is matched. callers for those helpers will be introduced in subsequent patches. Only registration of migration tolerances related to cpreg index mismatch is currently allowed. Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-id: 20260420140552.104369-2-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 82 ++++++++++++++++++++++++++++++++++++++++++ target/arm/cpu.h | 1 + target/arm/internals.h | 54 ++++++++++++++++++++++++++++ 3 files changed, 137 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ void arm_register_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook, QLIST_INSERT_HEAD(&cpu->el_change_hooks, entry, node); } +static ARMCPRegMigTolerance *find_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx) +{ + ARMCPRegMigTolerance *t; + QLIST_FOREACH(t, &cpu->cpreg_mig_tolerances, node) { + if (t->kvmidx == kvmidx) { + return t; + } + } + return NULL; +} + +void arm_register_cpreg_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx, + uint64_t mask, uint64_t value, + ARMCPRegMigToleranceType type) +{ + ARMCPRegMigTolerance *entry; + + /* make sure the kvmidx has not tolerance already registered */ + assert(!find_mig_tolerance(cpu, kvmidx)); + + assert(type == ToleranceNotOnBothEnds || + type == ToleranceOnlySrcTestValue); + + entry = g_new0(ARMCPRegMigTolerance, 1); + + entry->kvmidx = kvmidx; + entry->mask = mask; + entry->value = value; + entry->type = type; + + QLIST_INSERT_HEAD(&cpu->cpreg_mig_tolerances, entry, node); +} + +bool arm_cpu_match_cpreg_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx, + uint64_t vmstate_value, uint64_t local_value, + ARMCPRegMigToleranceType type) +{ + ARMCPRegMigTolerance *t = find_mig_tolerance(cpu, kvmidx); + uint64_t diff, diff_outside_mask, field; + + if (!t || t->type != type) { + return false; + } + + if (type == ToleranceNotOnBothEnds) { + return true; + } + + if (type == ToleranceOnlySrcTestValue && + ((vmstate_value & t->mask) == t->value)) { + return true; + } + + /* Need to check the mask */ + diff = vmstate_value ^ local_value; + diff_outside_mask = diff & ~t->mask; + + if (diff_outside_mask) { + /* there are differences outside of the mask */ + return false; + } + if (type == ToleranceDiffInMask) { + /* differences only in the field, tolerance matched */ + return true; + } + /* need to compare field value against authorized ones */ + field = vmstate_value & t->mask; + if (type == ToleranceFieldLT && (field < t->value)) { + return true; + } + if (type == ToleranceFieldGT && (field > t->value)) { + return true; + } + return false; +} + static void cp_reg_reset(gpointer key, gpointer value, gpointer opaque) { /* Reset a single ARMCPRegInfo register */ @@ -XXX,XX +XXX,XX @@ static void arm_cpu_initfn(Object *obj) QLIST_INIT(&cpu->pre_el_change_hooks); QLIST_INIT(&cpu->el_change_hooks); + QLIST_INIT(&cpu->cpreg_mig_tolerances); #ifdef CONFIG_USER_ONLY # ifdef TARGET_AARCH64 @@ -XXX,XX +XXX,XX @@ static void arm_cpu_finalizefn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); ARMELChangeHook *hook, *next; + ARMCPRegMigTolerance *t, *n; g_hash_table_destroy(cpu->cp_regs); @@ -XXX,XX +XXX,XX @@ static void arm_cpu_finalizefn(Object *obj) QLIST_REMOVE(hook, node); g_free(hook); } + QLIST_FOREACH_SAFE(t, &cpu->cpreg_mig_tolerances, node, n) { + QLIST_REMOVE(t, node); + g_free(t); + } #ifndef CONFIG_USER_ONLY if (cpu->pmu_timer) { timer_free(cpu->pmu_timer); diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ArchCPU { QLIST_HEAD(, ARMELChangeHook) pre_el_change_hooks; QLIST_HEAD(, ARMELChangeHook) el_change_hooks; + QLIST_HEAD(, ARMCPRegMigTolerance) cpreg_mig_tolerances; int32_t node_id; /* NUMA node this CPU belongs to */ diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ int compare_u64(const void *a, const void *b); /* Used in FEAT_MEC to set the MECIDWidthm1 field in the MECIDR_EL2 register. */ #define MECID_WIDTH 16 +typedef enum { + ToleranceNotOnBothEnds, + ToleranceOnlySrcTestValue, + ToleranceDiffInMask, + ToleranceFieldLT, + ToleranceFieldGT, +} ARMCPRegMigToleranceType; + +typedef struct ARMCPRegMigTolerance { + uint64_t kvmidx; + uint64_t mask; + uint64_t value; + ARMCPRegMigToleranceType type; + QLIST_ENTRY(ARMCPRegMigTolerance) node; +} ARMCPRegMigTolerance; + +/** + * arm_register_cpreg_mig_tolerance: + * Register a migration tolerance wrt one given cpreg identified by its + * @kvmidx. Calling this function twice for the same @kvmidx is a + * programming error and will cause an assertion failure. + * + * @cpu: vcpu to apply the migration tolerance on + * @kvmidx: kvm index of the cpreg the tolerance applies to + * @mask: bitmask where a difference is tolerated + * (relevant with ToleranceDiffInMask) + * @value: value the bitmask field is compared with + * (relevant with ToleranceFieldLT and ToleranceFieldGT) + * @type: type of the migration tolerance: + * - ToleranceNotOnBothEnds (cpreg index is allowed to be only present + * on one end) + * - ToleranceOnlySrcTestValue (cpreg index is allowed to be only + * present in source if its value @mask field matches @value) + * - ToleranceDiffInMask (mismatch in cpreg values are only tolerated + * if differences are within @mask) + * - ToleranceFieldLT (mismatch in cpreg values are only tolerated + * if incoming @bitmask field value is less than @value) + * - ToleranceFieldGT (mismatch in cpreg values are only tolerated + * if incoming @bitmask field value is greater than @value) + */ +void arm_register_cpreg_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx, + uint64_t mask, uint64_t value, + ARMCPRegMigToleranceType type); + +/** + * arm_cpu_match_cpreg_mig_tolerance: + * Check whether a tolerance of type @type exists for a given @kvmidx + * and the tolerance criterion is satisfied + */ +bool arm_cpu_match_cpreg_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx, + uint64_t vmstate_value, uint64_t local_value, + ARMCPRegMigToleranceType type); + + #endif -- 2.43.0 From: Eric Auger <eric.auger@redhat.com> If there is a mismatch between the cpreg indexes found on both ends, check whether a tolerance was registered for the given kvmidx. If any, silence warning/errors. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20260420140552.104369-3-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/machine.c | 21 +++++++++++++++------ target/arm/trace-events | 2 ++ 2 files changed, 17 insertions(+), 6 deletions(-) diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static void handle_cpreg_missing_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx { g_autofree gchar *name = print_register_name(kvmidx); + if (arm_cpu_match_cpreg_mig_tolerance(cpu, kvmidx, + 0, 0, ToleranceNotOnBothEnds)) { + trace_tolerate_cpreg_missing_in_incoming_stream(name); + return; + } warn_report("%s: %s " "expected by the destination but not in the incoming stream: " "skip it", __func__, name); } /* - * Handle the situation where @kvmidx is in the incoming stream - * but not on destination. This currently fails the migration but - * we plan to accomodate some exceptions, hence the boolean returned value. + * Handle the situation where @kvmidx is in the incoming + * stream but not on destination. This fails the migration if + * no cpreg mig tolerance is matched for this @kvmidx + * Return true if the migration should eventually fail */ static bool handle_cpreg_only_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx) { g_autofree gchar *name = print_register_name(kvmidx); - bool fail = true; + if (arm_cpu_match_cpreg_mig_tolerance(cpu, kvmidx, + 0, 0, ToleranceNotOnBothEnds)) { + trace_tolerate_cpreg_only_in_incoming_stream(name); + return false; + } error_report("%s: %s in the incoming stream but unknown on the " "destination: fail migration", __func__, name); - - return fail; + return true; } static int cpu_post_load(void *opaque, int version_id) diff --git a/target/arm/trace-events b/target/arm/trace-events index XXXXXXX..XXXXXXX 100644 --- a/target/arm/trace-events +++ b/target/arm/trace-events @@ -XXX,XX +XXX,XX @@ arm_psci_call(uint64_t x0, uint64_t x1, uint64_t x2, uint64_t x3, uint32_t cpuid # machine.c cpu_post_load(uint32_t cpreg_vmstate_array_len, uint32_t cpreg_array_len) "cpreg_vmstate_array_len=%d cpreg_array_len=%d" +tolerate_cpreg_missing_in_incoming_stream(char *name) "%s is missing in incoming stream but this is explicitly tolerated" +tolerate_cpreg_only_in_incoming_stream(char *name) "%s is in incoming stream but not on destination but this is explicitly tolerated" -- 2.43.0 From: Eric Auger <eric.auger@redhat.com> Pass the value of the incoming register to handle_cpreg_only_in_incoming_stream and check whether there is a matching ToleranceOnlySrcTestValue tolerance. Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-id: 20260420140552.104369-4-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/machine.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static void handle_cpreg_missing_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx * no cpreg mig tolerance is matched for this @kvmidx * Return true if the migration should eventually fail */ -static bool handle_cpreg_only_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx) +static bool +handle_cpreg_only_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx, uint64_t value) { g_autofree gchar *name = print_register_name(kvmidx); if (arm_cpu_match_cpreg_mig_tolerance(cpu, kvmidx, - 0, 0, ToleranceNotOnBothEnds)) { + 0, 0, ToleranceNotOnBothEnds) || + arm_cpu_match_cpreg_mig_tolerance(cpu, kvmidx, + value, 0, ToleranceOnlySrcTestValue)) { trace_tolerate_cpreg_only_in_incoming_stream(name); return false; } @@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id) } if (cpu->cpreg_vmstate_indexes[v] < cpu->cpreg_indexes[i]) { fail = handle_cpreg_only_in_incoming_stream(cpu, - cpu->cpreg_vmstate_indexes[v++]); + cpu->cpreg_vmstate_indexes[v], + cpu->cpreg_vmstate_values[v]); + v++; continue; } /* matching register, copy the value over */ @@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id) */ for ( ; v < cpu->cpreg_vmstate_array_len; v++) { fail = handle_cpreg_only_in_incoming_stream(cpu, - cpu->cpreg_vmstate_indexes[v]); + cpu->cpreg_vmstate_indexes[v], + cpu->cpreg_vmstate_values[v]); } if (fail) { return -1; -- 2.43.0 From: Eric Auger <eric.auger@redhat.com> Before linux v6.13 those registers were erroneously unconditionally exposed and this was fixed by commits: - 0fcb4eea5345 ("KVM: arm64: Hide TCR2_EL1 from userspace when disabled for guests") - a68cddbe47ef ("KVM: arm64: Hide S1PIE registers from userspace when disabled for guests") in v6.13. This means if we migrate from an old kernel host to a >= 6.13 kernel host, migration currently fails. Declare cpreg migration tolerance for those registers. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Sebastian Ott <sebott@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20260420140552.104369-5-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu64.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_a53_initfn(Object *obj) define_cortex_a72_a57_a53_cp_reginfo(cpu); } +#if defined(CONFIG_KVM) +static void kvm_arm_set_cpreg_mig_tolerances(ARMCPU *cpu) +{ + /* + * Registers that may be in the incoming stream and not exposed + * on the destination + */ + + /* + * TCR_EL1 was erroneously unconditionnally exposed before linux v6.13. + * See commit 0fcb4eea5345 ("KVM: arm64: Hide TCR2_EL1 from userspace + * when disabled for guests") + */ + arm_register_cpreg_mig_tolerance(cpu, ARM64_SYS_REG(3, 0, 2, 0, 3), + 0, 0, ToleranceNotOnBothEnds); + /* + * PIRE0_EL1 and PIR_EL1 were erroneously unconditionnally exposed + * before linux v6.13. See commit a68cddbe47ef ("KVM: arm64: Hide + * S1PIE registers from userspace when disabled for guests") + */ + arm_register_cpreg_mig_tolerance(cpu, ARM64_SYS_REG(3, 0, 10, 2, 2), + 0, 0, ToleranceNotOnBothEnds); + arm_register_cpreg_mig_tolerance(cpu, ARM64_SYS_REG(3, 0, 10, 2, 3), + 0, 0, ToleranceNotOnBothEnds); +} +#endif + static void aarch64_host_initfn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); @@ -XXX,XX +XXX,XX @@ static void aarch64_host_initfn(Object *obj) #endif #if defined(CONFIG_KVM) + kvm_arm_set_cpreg_mig_tolerances(cpu); kvm_arm_set_cpu_features_from_host(cpu); aarch64_add_sve_properties(obj); #elif defined(CONFIG_HVF) -- 2.43.0 From: Eric Auger <eric.auger@redhat.com> KVM_REG_ARM_VENDOR_HYP_BMAP_2 pseudo FW register is exposed from v6.15 onwards. Backward migration from a >= v6.15 to an older kernel would fail without cpreg migration tolerance definition for this register. If the register is present on source but not on destination, its value must be checked to make sure it matches the reset value, ie. 0, meaning no service is exposed to the guest, hence the choice of a ToleranceOnlySrcTestValue migration tolerance. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20260420140552.104369-6-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu64.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void kvm_arm_set_cpreg_mig_tolerances(ARMCPU *cpu) 0, 0, ToleranceNotOnBothEnds); arm_register_cpreg_mig_tolerance(cpu, ARM64_SYS_REG(3, 0, 10, 2, 3), 0, 0, ToleranceNotOnBothEnds); + + /* + * KVM_REG_ARM_VENDOR_HYP_BMAP_2 pseudo FW register is exposed + * from v6.15 onwards. Backward migration from a >= v6.15 to an older + * kernel would fail without cpreg migration tolerance definition. + * If the register is present on source but not on destination, make + * sure it has its reset value, ie. 0, meaning no service is exposed + * to the guest. + */ + arm_register_cpreg_mig_tolerance(cpu, KVM_REG_ARM_FW_FEAT_BMAP_REG(3), + UINT64_MAX, 0, ToleranceOnlySrcTestValue); } #endif -- 2.43.0 From: Eric Auger <eric.auger@redhat.com> We want to remove AArch32 DBGDTRTX which was erroneously exposed. This was attempted by 655659a74a36b ("target/arm: Correct encoding of Debug Communications Channel registers") but it was discovered that the removal of this debug register broke forward migration on TCG. Now we have the cpreg migration tolerance infrastructure, we can declare one for the DBGDTRTX. This allow to revert the reinstate patch. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Sebastian Ott <sebott@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20260420140552.104369-7-eric.auger@redhat.com [PMM: revised comment, included note about when we can drop the workaround] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .fgt = FGT_CLIDR_EL1, .resetvalue = GET_IDREG(isar, CLIDR) }; + uint64_t dbgtr_el0_kvmidx = + cpreg_to_kvm_id(ENCODE_CP_REG(14, 0, 1, 0, 5, 3, 0)); + define_one_arm_cp_reg(cpu, &clidr); define_arm_cp_regs(cpu, v7_cp_reginfo); define_debug_regs(cpu); + /* + * We used to incorrectly expose a non-existent AArch32 "DBGDTRTX" + * register with this encoding. This has been fixed by commit + * 655659a74a36 ("target/arm: Correct encoding of Debug + * Communications Channel registers") by the introduction of correct + * separate cpreg definitions for AA64 and AA32 versions. However, + * the old cpreg definition couldn't be removed without breaking + * migration, so commit 4f2b82f604 reinstated the bogus encoding + * for migration data only. + * + * Now that we have migration tolerance infrastructure, we can use + * this to allow forward migration from the buggy QEMU versions, + * accepting and ignoring the bogus register if it is in the + * source data. QEMU 11.0 was the last version that sent the + * bogus encoding, so this workaround can be removed at the point + * where we no longer care about migration from that version + * (i.e. when we remove the "virt-11.0" machine type). + */ + arm_register_cpreg_mig_tolerance(cpu, dbgtr_el0_kvmidx, + 0, 0, ToleranceNotOnBothEnds); } else { define_arm_cp_regs(cpu, not_v7_cp_reginfo); } -- 2.43.0 From: Eric Auger <eric.auger@redhat.com> This reverts commit 4f2b82f60431 ("target/arm: Reinstate bogus AArch32 DBGDTRTX register for migration compat). We don't need that commit anymore as the AArch32 DBGDTRTX register is declared to be safe to ignore in the incoming migration stream. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Sebastian Ott <sebott@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20260420140552.104369-8-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/debug_helper.c | 29 ----------------------------- 1 file changed, 29 deletions(-) diff --git a/target/arm/debug_helper.c b/target/arm/debug_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/debug_helper.c +++ b/target/arm/debug_helper.c @@ -XXX,XX +XXX,XX @@ static void dbgclaimclr_write(CPUARMState *env, const ARMCPRegInfo *ri, env->cp15.dbgclaim &= ~(value & 0xFF); } -static CPAccessResult access_bogus(CPUARMState *env, const ARMCPRegInfo *ri, - bool isread) -{ - /* Always UNDEF, as if this cpreg didn't exist */ - return CP_ACCESS_UNDEFINED; -} - static const ARMCPRegInfo debug_cp_reginfo[] = { /* * DBGDRAR, DBGDSAR: always RAZ since we don't implement memory mapped @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo debug_cp_reginfo[] = { .opc0 = 2, .opc1 = 3, .crn = 0, .crm = 4, .opc2 = 0, .access = PL0_RW, .accessfn = access_tdcc, .type = ARM_CP_CONST, .resetvalue = 0 }, - /* - * This is not a real AArch32 register. We used to incorrectly expose - * this due to a QEMU bug; to avoid breaking migration compatibility we - * need to continue to provide it so that we don't fail the inbound - * migration when it tells us about a sysreg that we don't have. - * We set an always-fails .accessfn, which means that the guest doesn't - * actually see this register (it will always UNDEF, identically to if - * there were no cpreg definition for it other than that we won't print - * a LOG_UNIMP message about it), and we set the ARM_CP_NO_GDB flag so the - * gdbstub won't see it either. - * (We can't just set .access = 0, because add_cpreg_to_hashtable() - * helpfully ignores cpregs which aren't accessible to the highest - * implemented EL.) - * - * TODO: implement a system for being able to describe "this register - * can be ignored if it appears in the inbound stream"; then we can - * remove this temporary hack. - */ - { .name = "BOGUS_DBGDTR_EL0", .state = ARM_CP_STATE_AA32, - .cp = 14, .opc1 = 3, .crn = 0, .crm = 5, .opc2 = 0, - .access = PL0_RW, .accessfn = access_bogus, - .type = ARM_CP_CONST | ARM_CP_NO_GDB, .resetvalue = 0 }, /* * OSECCR_EL1 provides a mechanism for an operating system * to access the contents of EDECCR. EDECCR is not implemented though, -- 2.43.0 From: Osama Abdelkader <osama.abdelkader@gmail.com> fdt_node_offset_by_compatible(fdt, -1, compat) only finds the first match. If the blob has more than one node with the same compatible string, extra nodes will remain active. Remove all the matching nodes, using the same loop as imx8mp-evk.c does for this purpose. Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com> Message-id: 20260420162114.308519-1-osama.abdelkader@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/raspi4b.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/hw/arm/raspi4b.c b/hw/arm/raspi4b.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/raspi4b.c +++ b/hw/arm/raspi4b.c @@ -XXX,XX +XXX,XX @@ static void raspi4_modify_dtb(const struct arm_boot_info *info, void *fdt) for (int i = 0; i < ARRAY_SIZE(nodes_to_remove); i++) { const char *dev_str = nodes_to_remove[i]; + int offset; - int offset = fdt_node_offset_by_compatible(fdt, -1, dev_str); - if (offset >= 0) { - if (!fdt_nop_node(fdt, offset)) { - warn_report("bcm2711 dtc: %s has been disabled!", dev_str); + offset = fdt_node_offset_by_compatible(fdt, -1, dev_str); + while (offset >= 0) { + if (fdt_nop_node(fdt, offset) == 0) { + warn_report("bcm2711 dtb: %s has been disabled!", dev_str); } + offset = fdt_node_offset_by_compatible(fdt, offset, dev_str); } } -- 2.43.0 From: Yucai Liu <1486344514@qq.com> Implement a basic i.MX6UL LCDIF controller model with MMIO registers, frame-done interrupt behavior, and framebuffer-backed display updates for RGB565 and XRGB8888 input formats. Place the LCDIF device under hw/display and build it via a dedicated CONFIG_IMX6UL_LCDIF symbol. Model register fields with registerfields.h helpers and provide migration support via vmstate. Signed-off-by: Yucai Liu <1486344514@qq.com> Message-id: 20260412110240.93116-2-yangyanglan718@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 2 + hw/display/Kconfig | 4 + hw/display/imx6ul_lcdif.c | 453 ++++++++++++++++++++++++++++++ hw/display/meson.build | 1 + include/hw/display/imx6ul_lcdif.h | 37 +++ 5 files changed, 497 insertions(+) create mode 100644 hw/display/imx6ul_lcdif.c create mode 100644 include/hw/display/imx6ul_lcdif.h diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ L: qemu-arm@nongnu.org S: Odd Fixes F: hw/arm/mcimx6ul-evk.c F: hw/arm/fsl-imx6ul.c +F: hw/display/imx6ul_lcdif.c F: hw/misc/imx6ul_ccm.c F: include/hw/arm/fsl-imx6ul.h +F: include/hw/display/imx6ul_lcdif.h F: include/hw/misc/imx6ul_ccm.h F: docs/system/arm/mcimx6ul-evk.rst diff --git a/hw/display/Kconfig b/hw/display/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/display/Kconfig +++ b/hw/display/Kconfig @@ -XXX,XX +XXX,XX @@ config PL110 bool select FRAMEBUFFER +config IMX6UL_LCDIF + bool + select FRAMEBUFFER + config SII9022 bool depends on I2C diff --git a/hw/display/imx6ul_lcdif.c b/hw/display/imx6ul_lcdif.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/display/imx6ul_lcdif.c @@ -XXX,XX +XXX,XX @@ +/* + * SPDX-License-Identifier: GPL-2.0-or-later + * + * i.MX6UL LCDIF controller + * + * Copyright (c) 2026 Yucai Liu <1486344514@qq.com> + */ + +#include "qemu/osdep.h" +#include "hw/display/imx6ul_lcdif.h" +#include "hw/core/irq.h" +#include "hw/core/registerfields.h" +#include "hw/display/framebuffer.h" +#include "migration/vmstate.h" +#include "system/address-spaces.h" +#include "qemu/module.h" +#include "qemu/units.h" +#include "ui/pixel_ops.h" + +#define LCDIF_MMIO_SIZE (16 * KiB) +#define LCDIF_RESET_CTRL1 0x000f0000 + +REG32(CTRL, 0x00) + FIELD(CTRL, RUN, 0, 1) + FIELD(CTRL, WORD_LENGTH, 8, 2) +REG32(CTRL1, 0x10) + FIELD(CTRL1, CUR_FRAME_DONE_IRQ, 9, 1) + FIELD(CTRL1, CUR_FRAME_DONE_IRQ_EN, 13, 1) + FIELD(CTRL1, BYTE_PACKING_FORMAT, 16, 4) +REG32(V4_TRANSFER_COUNT, 0x30) + FIELD(V4_TRANSFER_COUNT, H_COUNT, 0, 16) + FIELD(V4_TRANSFER_COUNT, V_COUNT, 16, 16) +REG32(V4_CUR_BUF, 0x40) +REG32(V4_NEXT_BUF, 0x50) +REG32(AS_NEXT_BUF, 0x230) + +#define REG_SET 0x4 +#define REG_CLR 0x8 +#define REG_TOG 0xc + +#define CTRL_WORD_LENGTH_16 0 +#define CTRL_WORD_LENGTH_24 3 + +#define FRAME_PERIOD_NS (16 * 1000 * 1000ULL) + +enum IMX6ULLCDIFReg { + IMX6UL_LCDIF_REG_CTRL = A_CTRL >> 4, + IMX6UL_LCDIF_REG_CTRL1 = A_CTRL1 >> 4, + IMX6UL_LCDIF_REG_V4_TRANSFER_COUNT = A_V4_TRANSFER_COUNT >> 4, + IMX6UL_LCDIF_REG_V4_CUR_BUF = A_V4_CUR_BUF >> 4, + IMX6UL_LCDIF_REG_V4_NEXT_BUF = A_V4_NEXT_BUF >> 4, + IMX6UL_LCDIF_REG_AS_NEXT_BUF = A_AS_NEXT_BUF >> 4, +}; + +static inline bool imx6ul_lcdif_reg_exists(hwaddr reg) +{ + return (reg >> 4) < IMX6UL_LCDIF_REGS_NUM; +} + +static inline bool imx6ul_lcdif_reg_has_setclr(hwaddr reg) +{ + switch (reg) { + case A_CTRL: + case A_CTRL1: + return true; + default: + return false; + } +} + +static inline bool imx6ul_lcdif_is_running(IMX6ULLCDIFState *s) +{ + uint32_t ctrl = s->regs[IMX6UL_LCDIF_REG_CTRL]; + + return FIELD_EX32(ctrl, CTRL, RUN); +} + +static inline bool imx6ul_lcdif_frame_done_pending(IMX6ULLCDIFState *s) +{ + uint32_t ctrl1 = s->regs[IMX6UL_LCDIF_REG_CTRL1]; + + return FIELD_EX32(ctrl1, CTRL1, CUR_FRAME_DONE_IRQ); +} + +static void imx6ul_lcdif_schedule_frame(IMX6ULLCDIFState *s) +{ + int64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + + timer_mod(s->frame_timer, now + FRAME_PERIOD_NS); +} + +static void imx6ul_lcdif_maybe_schedule_frame(IMX6ULLCDIFState *s) +{ + if (imx6ul_lcdif_is_running(s) && !imx6ul_lcdif_frame_done_pending(s)) { + imx6ul_lcdif_schedule_frame(s); + } else { + timer_del(s->frame_timer); + } +} + +static void imx6ul_lcdif_update_irq(IMX6ULLCDIFState *s) +{ + uint32_t ctrl1 = s->regs[IMX6UL_LCDIF_REG_CTRL1]; + bool level = FIELD_EX32(ctrl1, CTRL1, CUR_FRAME_DONE_IRQ_EN) && + FIELD_EX32(ctrl1, CTRL1, CUR_FRAME_DONE_IRQ); + + qemu_set_irq(s->irq, level); +} + +static void imx6ul_lcdif_frame_done(IMX6ULLCDIFState *s) +{ + uint32_t ctrl1 = s->regs[IMX6UL_LCDIF_REG_CTRL1]; + + ctrl1 = FIELD_DP32(ctrl1, CTRL1, CUR_FRAME_DONE_IRQ, 1); + s->regs[IMX6UL_LCDIF_REG_CTRL1] = ctrl1; + imx6ul_lcdif_update_irq(s); +} + +static void imx6ul_lcdif_draw_line_rgb565(void *opaque, uint8_t *dst, + const uint8_t *src, int width, + int dststep) +{ + uint32_t *dst32 = (uint32_t *)dst; + int i; + + for (i = 0; i < width; i++) { + uint16_t pixel = lduw_le_p(src); + uint8_t r = ((pixel >> 11) & 0x1f) << 3; + uint8_t g = ((pixel >> 5) & 0x3f) << 2; + uint8_t b = (pixel & 0x1f) << 3; + + *dst32++ = rgb_to_pixel32(r, g, b); + src += 2; + } +} + +static void imx6ul_lcdif_draw_line_xrgb8888(void *opaque, uint8_t *dst, + const uint8_t *src, int width, + int dststep) +{ + uint32_t *dst32 = (uint32_t *)dst; + int i; + + for (i = 0; i < width; i++) { + uint32_t pixel = ldl_le_p(src); + uint8_t r = (pixel >> 16) & 0xff; + uint8_t g = (pixel >> 8) & 0xff; + uint8_t b = pixel & 0xff; + + *dst32++ = rgb_to_pixel32(r, g, b); + src += 4; + } +} + +static void imx6ul_lcdif_update_display(void *opaque) +{ + IMX6ULLCDIFState *s = opaque; + DisplaySurface *surface = qemu_console_surface(s->con); + uint32_t transfer_count = s->regs[IMX6UL_LCDIF_REG_V4_TRANSFER_COUNT]; + uint32_t width = FIELD_EX32(transfer_count, V4_TRANSFER_COUNT, H_COUNT); + uint32_t height = FIELD_EX32(transfer_count, V4_TRANSFER_COUNT, V_COUNT); + uint32_t ctrl = s->regs[IMX6UL_LCDIF_REG_CTRL]; + uint32_t frame_base = s->regs[IMX6UL_LCDIF_REG_V4_CUR_BUF]; + drawfn fn; + int first = 0; + int last = 0; + int src_width; + + if (!imx6ul_lcdif_is_running(s) || width == 0 || height == 0) { + return; + } + + switch (FIELD_EX32(ctrl, CTRL, WORD_LENGTH)) { + case CTRL_WORD_LENGTH_16: + s->src_bpp = 2; + fn = imx6ul_lcdif_draw_line_rgb565; + break; + case CTRL_WORD_LENGTH_24: + s->src_bpp = 4; + fn = imx6ul_lcdif_draw_line_xrgb8888; + break; + default: + return; + } + + if (surface_width(surface) != width || surface_height(surface) != height) { + qemu_console_resize(s->con, width, height); + surface = qemu_console_surface(s->con); + s->invalidate = true; + } + + src_width = width * s->src_bpp; + if (s->invalidate || s->fb_base != frame_base || + s->src_width != src_width || s->rows != height) { + framebuffer_update_memory_section(&s->fbsection, get_system_memory(), + frame_base, height, src_width); + s->fb_base = frame_base; + s->src_width = src_width; + s->rows = height; + } + + framebuffer_update_display(surface, &s->fbsection, width, height, + src_width, surface_stride(surface), 0, + s->invalidate, fn, s, &first, &last); + if (first >= 0) { + dpy_gfx_update(s->con, 0, first, width, last - first + 1); + } + + s->invalidate = false; +} + +static void imx6ul_lcdif_invalidate_display(void *opaque) +{ + IMX6ULLCDIFState *s = opaque; + + s->invalidate = true; +} + +static const GraphicHwOps imx6ul_lcdif_graphic_ops = { + .invalidate = imx6ul_lcdif_invalidate_display, + .gfx_update = imx6ul_lcdif_update_display, +}; + +static void imx6ul_lcdif_frame_timer_cb(void *opaque) +{ + IMX6ULLCDIFState *s = opaque; + + if (!imx6ul_lcdif_is_running(s) || imx6ul_lcdif_frame_done_pending(s)) { + return; + } + + imx6ul_lcdif_frame_done(s); +} + +static uint64_t imx6ul_lcdif_read(void *opaque, hwaddr offset, unsigned size) +{ + IMX6ULLCDIFState *s = opaque; + hwaddr reg = offset & ~0xf; + uint32_t idx; + + assert(size == 4); + assert(!(offset & 0x3)); + assert(offset < LCDIF_MMIO_SIZE); + + idx = reg >> 4; + if (idx >= ARRAY_SIZE(s->regs)) { + return 0; + } + + return s->regs[idx]; +} + +static void imx6ul_lcdif_write(void *opaque, hwaddr offset, + uint64_t value, unsigned size) +{ + IMX6ULLCDIFState *s = opaque; + hwaddr reg = offset & ~0xf; + uint32_t idx; + uint32_t oldv; + + assert(size == 4); + assert(!(offset & 0x3)); + assert(offset < LCDIF_MMIO_SIZE); + + if (!imx6ul_lcdif_reg_exists(reg)) { + return; + } + + idx = reg >> 4; + oldv = s->regs[idx]; + + switch (offset & 0xf) { + case 0: + s->regs[idx] = (uint32_t)value; + break; + case REG_SET: + if (!imx6ul_lcdif_reg_has_setclr(reg)) { + return; + } + s->regs[idx] = oldv | (uint32_t)value; + break; + case REG_CLR: + if (!imx6ul_lcdif_reg_has_setclr(reg)) { + return; + } + s->regs[idx] = oldv & ~(uint32_t)value; + break; + case REG_TOG: + if (!imx6ul_lcdif_reg_has_setclr(reg)) { + return; + } + s->regs[idx] = oldv ^ (uint32_t)value; + break; + default: + g_assert_not_reached(); + } + + switch (reg) { + case A_CTRL: + if (!FIELD_EX32(oldv, CTRL, RUN) && + FIELD_EX32(s->regs[idx], CTRL, RUN)) { + s->invalidate = true; + graphic_hw_invalidate(s->con); + imx6ul_lcdif_maybe_schedule_frame(s); + break; + } + if (FIELD_EX32(oldv, CTRL, RUN) && + !FIELD_EX32(s->regs[idx], CTRL, RUN)) { + timer_del(s->frame_timer); + } + break; + case A_CTRL1: + if (FIELD_EX32(oldv, CTRL1, CUR_FRAME_DONE_IRQ) && + !FIELD_EX32(s->regs[idx], CTRL1, CUR_FRAME_DONE_IRQ)) { + imx6ul_lcdif_maybe_schedule_frame(s); + } + break; + case A_V4_TRANSFER_COUNT: + s->invalidate = true; + graphic_hw_invalidate(s->con); + break; + case A_V4_CUR_BUF: + s->invalidate = true; + graphic_hw_invalidate(s->con); + break; + case A_V4_NEXT_BUF: + s->regs[IMX6UL_LCDIF_REG_V4_CUR_BUF] = s->regs[idx]; + imx6ul_lcdif_frame_done(s); + s->invalidate = true; + graphic_hw_invalidate(s->con); + imx6ul_lcdif_maybe_schedule_frame(s); + return; + case A_AS_NEXT_BUF: + imx6ul_lcdif_frame_done(s); + imx6ul_lcdif_maybe_schedule_frame(s); + return; + default: + break; + } + + imx6ul_lcdif_update_irq(s); +} + +static const MemoryRegionOps imx6ul_lcdif_ops = { + .read = imx6ul_lcdif_read, + .write = imx6ul_lcdif_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static void imx6ul_lcdif_reset(DeviceState *dev) +{ + IMX6ULLCDIFState *s = IMX6UL_LCDIF(dev); + + memset(s->regs, 0, sizeof(s->regs)); + s->regs[IMX6UL_LCDIF_REG_CTRL1] = LCDIF_RESET_CTRL1; + s->fb_base = 0; + s->src_width = 0; + s->rows = 0; + s->src_bpp = 0; + s->invalidate = true; + timer_del(s->frame_timer); + imx6ul_lcdif_update_irq(s); +} + +static int imx6ul_lcdif_post_load(void *opaque, int version_id) +{ + IMX6ULLCDIFState *s = opaque; + + s->fb_base = 0; + s->src_width = 0; + s->rows = 0; + s->src_bpp = 0; + s->invalidate = true; + + imx6ul_lcdif_update_irq(s); + if (imx6ul_lcdif_is_running(s) && + !imx6ul_lcdif_frame_done_pending(s) && + !timer_pending(s->frame_timer)) { + imx6ul_lcdif_schedule_frame(s); + } + + return 0; +} + +static const VMStateDescription vmstate_imx6ul_lcdif = { + .name = TYPE_IMX6UL_LCDIF, + .version_id = 1, + .minimum_version_id = 1, + .post_load = imx6ul_lcdif_post_load, + .fields = (const VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, IMX6ULLCDIFState, IMX6UL_LCDIF_REGS_NUM), + VMSTATE_TIMER_PTR(frame_timer, IMX6ULLCDIFState), + VMSTATE_END_OF_LIST() + }, +}; + +static void imx6ul_lcdif_realize(DeviceState *dev, Error **errp) +{ + IMX6ULLCDIFState *s = IMX6UL_LCDIF(dev); + + s->frame_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, + imx6ul_lcdif_frame_timer_cb, s); + s->invalidate = true; + memory_region_init_io(&s->iomem, OBJECT(dev), &imx6ul_lcdif_ops, s, + TYPE_IMX6UL_LCDIF, LCDIF_MMIO_SIZE); + sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->iomem); + sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq); + s->con = graphic_console_init(dev, 0, &imx6ul_lcdif_graphic_ops, s); +} + +static void imx6ul_lcdif_unrealize(DeviceState *dev) +{ + IMX6ULLCDIFState *s = IMX6UL_LCDIF(dev); + + timer_del(s->frame_timer); + timer_free(s->frame_timer); + s->frame_timer = NULL; + + if (s->con) { + graphic_console_close(s->con); + s->con = NULL; + } +} + +static void imx6ul_lcdif_class_init(ObjectClass *klass, const void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = imx6ul_lcdif_realize; + dc->unrealize = imx6ul_lcdif_unrealize; + dc->vmsd = &vmstate_imx6ul_lcdif; + device_class_set_legacy_reset(dc, imx6ul_lcdif_reset); + dc->desc = "i.MX6UL LCDIF"; +} + +static const TypeInfo imx6ul_lcdif_info = { + .name = TYPE_IMX6UL_LCDIF, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(IMX6ULLCDIFState), + .class_init = imx6ul_lcdif_class_init, +}; + +static void imx6ul_lcdif_register_types(void) +{ + type_register_static(&imx6ul_lcdif_info); +} + +type_init(imx6ul_lcdif_register_types) diff --git a/hw/display/meson.build b/hw/display/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/display/meson.build +++ b/hw/display/meson.build @@ -XXX,XX +XXX,XX @@ system_ss.add(when: ['CONFIG_VGA_CIRRUS', 'CONFIG_VGA_ISA'], if_true: files('cir system_ss.add(when: 'CONFIG_G364FB', if_true: files('g364fb.c')) system_ss.add(when: 'CONFIG_JAZZ_LED', if_true: files('jazz_led.c')) system_ss.add(when: 'CONFIG_PL110', if_true: files('pl110.c')) +system_ss.add(when: 'CONFIG_IMX6UL_LCDIF', if_true: files('imx6ul_lcdif.c')) system_ss.add(when: 'CONFIG_SII9022', if_true: files('sii9022.c')) system_ss.add(when: 'CONFIG_SSD0303', if_true: files('ssd0303.c')) system_ss.add(when: 'CONFIG_SSD0323', if_true: files('ssd0323.c')) diff --git a/include/hw/display/imx6ul_lcdif.h b/include/hw/display/imx6ul_lcdif.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/display/imx6ul_lcdif.h @@ -XXX,XX +XXX,XX @@ +/* + * SPDX-License-Identifier: GPL-2.0-or-later + * + * i.MX6UL LCDIF controller + * + * Copyright (c) 2026 Yucai Liu <1486344514@qq.com> + */ + +#ifndef IMX6UL_LCDIF_H +#define IMX6UL_LCDIF_H + +#include "hw/core/sysbus.h" +#include "qom/object.h" +#include "qemu/timer.h" +#include "ui/console.h" + +#define TYPE_IMX6UL_LCDIF "imx6ul-lcdif" +#define IMX6UL_LCDIF_REGS_NUM ((0x230 >> 4) + 1) +OBJECT_DECLARE_SIMPLE_TYPE(IMX6ULLCDIFState, IMX6UL_LCDIF) + +struct IMX6ULLCDIFState { + SysBusDevice parent_obj; + + MemoryRegion iomem; + MemoryRegionSection fbsection; + qemu_irq irq; + QemuConsole *con; + QEMUTimer *frame_timer; + uint32_t fb_base; + uint32_t src_width; + uint32_t rows; + uint8_t src_bpp; + bool invalidate; + uint32_t regs[IMX6UL_LCDIF_REGS_NUM]; +}; + +#endif /* IMX6UL_LCDIF_H */ -- 2.43.0 From: Yucai Liu <1486344514@qq.com> Instantiate LCDIF as a child object of the i.MX6UL SoC in init and realize it in the SoC realize path before MMIO/IRQ hookup. Also make FSL_IMX6UL select CONFIG_IMX6UL_LCDIF and map the LCDIF region with a 16 KiB size to match the SoC memory map. Signed-off-by: Yucai Liu <1486344514@qq.com> Message-id: 20260412110240.93116-3-yangyanglan718@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx6ul.c | 12 ++++++++++-- include/hw/arm/fsl-imx6ul.h | 4 +++- 3 files changed, 14 insertions(+), 3 deletions(-) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX6UL imply I2C_DEVICES select A15MPCORE select IMX + select IMX6UL_LCDIF select IMX_FEC select IMX_I2C select IMX_USBPHY diff --git a/hw/arm/fsl-imx6ul.c b/hw/arm/fsl-imx6ul.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx6ul.c +++ b/hw/arm/fsl-imx6ul.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qapi/error.h" #include "hw/arm/fsl-imx6ul.h" +#include "hw/display/imx6ul_lcdif.h" #include "hw/misc/unimp.h" #include "hw/usb/imx-usb-phy.h" #include "hw/core/boards.h" @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) object_initialize_child(obj, name, &s->usb[i], TYPE_CHIPIDEA); } + /* + * LCDIF + */ + object_initialize_child(obj, "lcdif", &s->lcdif, TYPE_IMX6UL_LCDIF); + /* * SDHCIs */ @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) /* * LCD */ - create_unimplemented_device("lcdif", FSL_IMX6UL_LCDIF_ADDR, - FSL_IMX6UL_LCDIF_SIZE); + sysbus_realize(SYS_BUS_DEVICE(&s->lcdif), &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->lcdif), 0, FSL_IMX6UL_LCDIF_ADDR); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->lcdif), 0, + qdev_get_gpio_in(gic, FSL_IMX6UL_LCDIF_IRQ)); /* * CSU diff --git a/include/hw/arm/fsl-imx6ul.h b/include/hw/arm/fsl-imx6ul.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx6ul.h +++ b/include/hw/arm/fsl-imx6ul.h @@ -XXX,XX +XXX,XX @@ #include "hw/net/imx_fec.h" #include "hw/usb/chipidea.h" #include "hw/usb/imx-usb-phy.h" +#include "hw/display/imx6ul_lcdif.h" #include "system/memory.h" #include "target/arm/cpu.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct FslIMX6ULState { IMX2WdtState wdt[FSL_IMX6UL_NUM_WDTS]; IMXUSBPHYState usbphy[FSL_IMX6UL_NUM_USB_PHYS]; ChipideaState usb[FSL_IMX6UL_NUM_USBS]; + IMX6ULLCDIFState lcdif; MemoryRegion rom; MemoryRegion caam; MemoryRegion ocram; @@ -XXX,XX +XXX,XX @@ enum FslIMX6ULMemoryMap { FSL_IMX6UL_PXP_SIZE = (16 * KiB), FSL_IMX6UL_LCDIF_ADDR = 0x021C8000, - FSL_IMX6UL_LCDIF_SIZE = 0x100, + FSL_IMX6UL_LCDIF_SIZE = (16 * KiB), FSL_IMX6UL_CSI_ADDR = 0x021C4000, FSL_IMX6UL_CSI_SIZE = 0x100, -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> We have a registerfields interface which we can use for defining fields alongside helpers to access them. Define the basic syndrome layout and convert the helpers that take the imm16 data directly. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-2-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 75 ++++++++++++++++++++++++++++++++----------- 1 file changed, 57 insertions(+), 18 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ #ifndef TARGET_ARM_SYNDROME_H #define TARGET_ARM_SYNDROME_H -#include "qemu/bitops.h" +#include "hw/core/registerfields.h" /* Valid Syndrome Register EC field values */ enum arm_exception_class { @@ -XXX,XX +XXX,XX @@ enum arm_exception_class { EC_AA64_BKPT = 0x3c, }; +/* Generic syndrome encoding layout for HSR and lower 32 bits of ESR_EL2 */ +FIELD(SYNDROME, EC, 26, 6) +FIELD(SYNDROME, IL, 25, 1) +FIELD(SYNDROME, ISS, 0, 25) + typedef enum { SME_ET_AccessTrap, SME_ET_Streaming, @@ -XXX,XX +XXX,XX @@ typedef enum { static inline uint32_t syn_get_ec(uint32_t syn) { - return syn >> ARM_EL_EC_SHIFT; + return FIELD_EX32(syn, SYNDROME, EC); } static inline uint32_t syn_set_ec(uint32_t syn, uint32_t ec) { - return deposit32(syn, ARM_EL_EC_SHIFT, ARM_EL_EC_LENGTH, ec); + return FIELD_DP32(syn, SYNDROME, EC, ec); } /* @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_set_ec(uint32_t syn, uint32_t ec) */ static inline uint32_t syn_uncategorized(void) { - return (EC_UNCATEGORIZED << ARM_EL_EC_SHIFT) | ARM_EL_IL; + uint32_t res = syn_set_ec(0, EC_UNCATEGORIZED); + res = FIELD_DP32(res, SYNDROME, IL, 1); + return res; } +FIELD(ISS_IMM16, IMM16, 0, 16) + static inline uint32_t syn_aa64_svc(uint32_t imm16) { - return (EC_AA64_SVC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); + uint32_t res = syn_set_ec(0, EC_AA64_SVC); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); + return res; } static inline uint32_t syn_aa64_hvc(uint32_t imm16) { - return (EC_AA64_HVC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); + uint32_t res = syn_set_ec(0, EC_AA64_HVC); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); + return res; } static inline uint32_t syn_aa64_smc(uint32_t imm16) { - return (EC_AA64_SMC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); + uint32_t res = syn_set_ec(0, EC_AA64_SMC); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); + return res; } static inline uint32_t syn_aa32_svc(uint32_t imm16, bool is_16bit) { - return (EC_AA32_SVC << ARM_EL_EC_SHIFT) | (imm16 & 0xffff) - | (is_16bit ? 0 : ARM_EL_IL); + uint32_t res = syn_set_ec(0, EC_AA32_SVC); + res = FIELD_DP32(res, SYNDROME, IL, is_16bit ? 0 : 1); + res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); + return res; } static inline uint32_t syn_aa32_hvc(uint32_t imm16) { - return (EC_AA32_HVC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); + uint32_t res = syn_set_ec(0, EC_AA32_HVC); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); + return res; } static inline uint32_t syn_aa32_smc(void) { - return (EC_AA32_SMC << ARM_EL_EC_SHIFT) | ARM_EL_IL; + uint32_t res = syn_set_ec(0, EC_AA32_SMC); + res = FIELD_DP32(res, SYNDROME, IL, 1); + return res; } static inline uint32_t syn_aa64_bkpt(uint32_t imm16) { - return (EC_AA64_BKPT << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); + uint32_t res = syn_set_ec(0, EC_AA64_BKPT); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); + return res; } static inline uint32_t syn_aa32_bkpt(uint32_t imm16, bool is_16bit) { - return (EC_AA32_BKPT << ARM_EL_EC_SHIFT) | (imm16 & 0xffff) - | (is_16bit ? 0 : ARM_EL_IL); + uint32_t res = syn_set_ec(0, EC_AA32_BKPT); + res = FIELD_DP32(res, SYNDROME, IL, is_16bit ? 0 : 1); + res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); + return res; } static inline uint32_t syn_aa64_sysregtrap(int op0, int op1, int op2, @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_simd_access_trap(int cv, int cond, bool is_16bit) static inline uint32_t syn_sve_access_trap(void) { - return (EC_SVEACCESSTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL; + uint32_t res = syn_set_ec(0, EC_SVEACCESSTRAP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + return res; } /* @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit) static inline uint32_t syn_illegalstate(void) { - return (EC_ILLEGALSTATE << ARM_EL_EC_SHIFT) | ARM_EL_IL; + uint32_t res = syn_set_ec(0, EC_ILLEGALSTATE); + res = FIELD_DP32(res, SYNDROME, IL, 1); + return res; } static inline uint32_t syn_pcalignment(void) { - return (EC_PCALIGNMENT << ARM_EL_EC_SHIFT) | ARM_EL_IL; + uint32_t res = syn_set_ec(0, EC_PCALIGNMENT); + res = FIELD_DP32(res, SYNDROME, IL, 1); + return res; } static inline uint32_t syn_gcs_data_check(GCSInstructionType it, int rn) @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_gcs_gcsstr(int ra, int rn) static inline uint32_t syn_serror(uint32_t extra) { - return (EC_SERROR << ARM_EL_EC_SHIFT) | ARM_EL_IL | extra; + uint32_t res = syn_set_ec(0, EC_SERROR); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, SYNDROME, ISS, extra); + return res; } static inline uint32_t syn_mop(bool is_set, bool is_setg, int options, -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Migrate syn_aa64_sysregtrap and co-processor register trap syndromes to the registerfields API. The co-processor syndromes are split between single and duel register moves. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-3-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 124 ++++++++++++++++++++++++++++++++++-------- 1 file changed, 102 insertions(+), 22 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ enum arm_exception_class { /* Generic syndrome encoding layout for HSR and lower 32 bits of ESR_EL2 */ FIELD(SYNDROME, EC, 26, 6) -FIELD(SYNDROME, IL, 25, 1) +FIELD(SYNDROME, IL, 25, 1) /* IL=1 for 32 bit instructions */ FIELD(SYNDROME, ISS, 0, 25) typedef enum { @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_aa64_smc(uint32_t imm16) static inline uint32_t syn_aa32_svc(uint32_t imm16, bool is_16bit) { uint32_t res = syn_set_ec(0, EC_AA32_SVC); - res = FIELD_DP32(res, SYNDROME, IL, is_16bit ? 0 : 1); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); return res; } @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_aa64_bkpt(uint32_t imm16) static inline uint32_t syn_aa32_bkpt(uint32_t imm16, bool is_16bit) { uint32_t res = syn_set_ec(0, EC_AA32_BKPT); - res = FIELD_DP32(res, SYNDROME, IL, is_16bit ? 0 : 1); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); return res; } +/* + * ISS encoding for an exception from MSR, MRS, or System instruction + * in AArch64 state. + */ +FIELD(SYSREG_ISS, ISREAD, 0, 1) /* Direction, 1 is read */ +FIELD(SYSREG_ISS, CRM, 1, 4) +FIELD(SYSREG_ISS, RT, 5, 5) +FIELD(SYSREG_ISS, CRN, 10, 4) +FIELD(SYSREG_ISS, OP1, 14, 3) +FIELD(SYSREG_ISS, OP2, 17, 3) +FIELD(SYSREG_ISS, OP0, 20, 2) + static inline uint32_t syn_aa64_sysregtrap(int op0, int op1, int op2, int crn, int crm, int rt, int isread) { - return (EC_SYSTEMREGISTERTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL - | (op0 << 20) | (op2 << 17) | (op1 << 14) | (crn << 10) | (rt << 5) - | (crm << 1) | isread; + uint32_t res = syn_set_ec(0, EC_SYSTEMREGISTERTRAP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, SYSREG_ISS, OP0, op0); + res = FIELD_DP32(res, SYSREG_ISS, OP2, op2); + res = FIELD_DP32(res, SYSREG_ISS, OP1, op1); + res = FIELD_DP32(res, SYSREG_ISS, CRN, crn); + res = FIELD_DP32(res, SYSREG_ISS, RT, rt); + res = FIELD_DP32(res, SYSREG_ISS, CRM, crm); + res = FIELD_DP32(res, SYSREG_ISS, ISREAD, isread); + + return res; } +/* + * ISS encoding for an exception from an MCR or MRC access + * (move to/from co-processor) + */ +FIELD(COPROC_ISS, ISREAD, 0, 1) +FIELD(COPROC_ISS, CRM, 1, 4) +FIELD(COPROC_ISS, RT, 5, 5) +FIELD(COPROC_ISS, CRN, 10, 4) +FIELD(COPROC_ISS, OP1, 14, 3) +FIELD(COPROC_ISS, OP2, 17, 3) +FIELD(COPROC_ISS, COND, 20, 4) +FIELD(COPROC_ISS, CV, 24, 1) + static inline uint32_t syn_cp14_rt_trap(int cv, int cond, int opc1, int opc2, int crn, int crm, int rt, int isread, bool is_16bit) { - return (EC_CP14RTTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | (opc2 << 17) | (opc1 << 14) - | (crn << 10) | (rt << 5) | (crm << 1) | isread; + uint32_t res = syn_set_ec(0, EC_CP14RTTRAP); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); + + res = FIELD_DP32(res, COPROC_ISS, CV, cv); + res = FIELD_DP32(res, COPROC_ISS, COND, cond); + res = FIELD_DP32(res, COPROC_ISS, OP2, opc2); + res = FIELD_DP32(res, COPROC_ISS, OP1, opc1); + res = FIELD_DP32(res, COPROC_ISS, CRN, crn); + res = FIELD_DP32(res, COPROC_ISS, RT, rt); + res = FIELD_DP32(res, COPROC_ISS, CRM, crm); + res = FIELD_DP32(res, COPROC_ISS, ISREAD, isread); + + return res; } static inline uint32_t syn_cp15_rt_trap(int cv, int cond, int opc1, int opc2, int crn, int crm, int rt, int isread, bool is_16bit) { - return (EC_CP15RTTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | (opc2 << 17) | (opc1 << 14) - | (crn << 10) | (rt << 5) | (crm << 1) | isread; + uint32_t res = syn_set_ec(0, EC_CP15RTTRAP); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); + + res = FIELD_DP32(res, COPROC_ISS, CV, cv); + res = FIELD_DP32(res, COPROC_ISS, COND, cond); + res = FIELD_DP32(res, COPROC_ISS, OP2, opc2); + res = FIELD_DP32(res, COPROC_ISS, OP1, opc1); + res = FIELD_DP32(res, COPROC_ISS, CRN, crn); + res = FIELD_DP32(res, COPROC_ISS, RT, rt); + res = FIELD_DP32(res, COPROC_ISS, CRM, crm); + res = FIELD_DP32(res, COPROC_ISS, ISREAD, isread); + + return res; } +/* + * ISS encoding for an exception from an MCRR or MRRC access + * (move to/from co-processor with 2 regs) + */ +FIELD(COPROC_R2_ISS, ISREAD, 0, 1) +FIELD(COPROC_R2_ISS, CRM, 1, 4) +FIELD(COPROC_R2_ISS, RT, 5, 5) +FIELD(COPROC_R2_ISS, RT2, 10, 5) +FIELD(COPROC_R2_ISS, OP1, 16, 4) +FIELD(COPROC_R2_ISS, COND, 20, 4) +FIELD(COPROC_R2_ISS, CV, 24, 1) + static inline uint32_t syn_cp14_rrt_trap(int cv, int cond, int opc1, int crm, int rt, int rt2, int isread, bool is_16bit) { - return (EC_CP14RRTTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | (opc1 << 16) - | (rt2 << 10) | (rt << 5) | (crm << 1) | isread; + uint32_t res = syn_set_ec(0, EC_CP14RRTTRAP); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); + + res = FIELD_DP32(res, COPROC_R2_ISS, CV, cv); + res = FIELD_DP32(res, COPROC_R2_ISS, COND, cond); + res = FIELD_DP32(res, COPROC_R2_ISS, OP1, opc1); + res = FIELD_DP32(res, COPROC_R2_ISS, RT2, rt2); + res = FIELD_DP32(res, COPROC_R2_ISS, RT, rt); + res = FIELD_DP32(res, COPROC_R2_ISS, CRM, crm); + res = FIELD_DP32(res, COPROC_R2_ISS, ISREAD, isread); + + return res; } static inline uint32_t syn_cp15_rrt_trap(int cv, int cond, int opc1, int crm, int rt, int rt2, int isread, bool is_16bit) { - return (EC_CP15RRTTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | (opc1 << 16) - | (rt2 << 10) | (rt << 5) | (crm << 1) | isread; + uint32_t res = syn_set_ec(0, EC_CP15RRTTRAP); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); + + res = FIELD_DP32(res, COPROC_R2_ISS, CV, cv); + res = FIELD_DP32(res, COPROC_R2_ISS, COND, cond); + res = FIELD_DP32(res, COPROC_R2_ISS, OP1, opc1); + res = FIELD_DP32(res, COPROC_R2_ISS, RT2, rt2); + res = FIELD_DP32(res, COPROC_R2_ISS, RT, rt); + res = FIELD_DP32(res, COPROC_R2_ISS, CRM, crm); + res = FIELD_DP32(res, COPROC_R2_ISS, ISREAD, isread); + + return res; } static inline uint32_t syn_fp_access_trap(int cv, int cond, bool is_16bit, -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> The syn_simd_access trap was never used so remove it. We should only see the COPROC encoding on v7 architectures. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-4-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 25 +++++++++++++++---------- 1 file changed, 15 insertions(+), 10 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_cp15_rrt_trap(int cv, int cond, int opc1, int crm, return res; } +/* + * ISS encoding for an exception from an access to a register of + * instruction resulting from the FPEN or TFP traps. + */ +FIELD(FP_ISS, COPROC, 0, 4) /* ARMv7 only */ +FIELD(FP_ISS, COND, 20, 4) +FIELD(FP_ISS, CV, 24, 1) + static inline uint32_t syn_fp_access_trap(int cv, int cond, bool is_16bit, int coproc) { /* AArch32 FP trap or any AArch64 FP/SIMD trap: TA == 0 */ - return (EC_ADVSIMDFPACCESSTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | coproc; -} + uint32_t res = syn_set_ec(0, EC_ADVSIMDFPACCESSTRAP); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); -static inline uint32_t syn_simd_access_trap(int cv, int cond, bool is_16bit) -{ - /* AArch32 SIMD trap: TA == 1 coproc == 0 */ - return (EC_ADVSIMDFPACCESSTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | (1 << 5); + res = FIELD_DP32(res, FP_ISS, CV, cv); + res = FIELD_DP32(res, FP_ISS, COND, cond); + res = FIELD_DP32(res, FP_ISS, COPROC, coproc); + + return res; } static inline uint32_t syn_sve_access_trap(void) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> For simplicity keep the OP as a two bit field rather than the two interlinked fields in the docs (ERET/ERETA). Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-5-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_sve_access_trap(void) } /* + * ISS encoding for an exception from an ERET, ERETAA or ERETAB + * instructions. + * * eret_op is bits [1:0] of the ERET instruction, so: * 0 for ERET, 2 for ERETAA, 3 for ERETAB. */ +FIELD(ERET_ISS, OP, 0, 2) + static inline uint32_t syn_erettrap(int eret_op) { - return (EC_ERETTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL | eret_op; + uint32_t res = syn_set_ec(0, EC_ERETTRAP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, ERET_ISS, OP, eret_op); + + return res; } static inline uint32_t syn_smetrap(SMEExceptionType etype, bool is_16bit) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-6-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_erettrap(int eret_op) return res; } +/* + * ISS encoding for an exception due to SME functionality + */ +FIELD(SME_ISS, SMTC, 0, 2) + static inline uint32_t syn_smetrap(SMEExceptionType etype, bool is_16bit) { - return (EC_SMETRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) | etype; + uint32_t res = syn_set_ec(0, EC_SMETRAP); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); + res = FIELD_DP32(res, SME_ISS, SMTC, etype); + + return res; } static inline uint32_t syn_pacfail(bool data, int keynumber) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> syn_pactrap is fairly simple as the ISS is all RES0. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-7-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 23 ++++++++++++++++++++--- 1 file changed, 20 insertions(+), 3 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_smetrap(SMEExceptionType etype, bool is_16bit) return res; } +/* + * ISS encoding for a PAC Fail exceptions + */ +FIELD(PACFAIL_ISS, BnA, 0, 1) /* B key or A key */ +FIELD(PACFAIL_ISS, DnI, 1, 1) /* Data or Instruction */ + static inline uint32_t syn_pacfail(bool data, int keynumber) { - int error_code = (data << 1) | keynumber; - return (EC_PACFAIL << ARM_EL_EC_SHIFT) | ARM_EL_IL | error_code; + uint32_t res = syn_set_ec(0, EC_PACFAIL); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, PACFAIL_ISS, DnI, data); + res = FIELD_DP32(res, PACFAIL_ISS, BnA, keynumber); + + return res; } +/* + * ISS encoding for an exception from a trapped Pointer + * Authentication instruction is RES0 + */ static inline uint32_t syn_pactrap(void) { - return (EC_PACTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL; + uint32_t res = syn_set_ec(0, EC_PACTRAP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + return res; } static inline uint32_t syn_btitrap(int btype) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-8-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_pactrap(void) return res; } +/* + * ISS encoding for an exception from a Branch Target Identification + * instruction. + */ +FIELD(BTI_ISS, BTYPE, 0, 2) + static inline uint32_t syn_btitrap(int btype) { - return (EC_BTITRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL | btype; + uint32_t res = syn_set_ec(0, EC_BTITRAP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, BTI_ISS, BTYPE, btype); + return res; } static inline uint32_t syn_bxjtrap(int cv, int cond, int rm) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> This is an Armv7 specific syndrome for chips with Jazelle functionality. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-9-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_btitrap(int btype) return res; } +/* + * ISS encoding for trapped BXJ execution + * + * This is an Armv7 encoding. + */ +FIELD(BXJ_ISS, RM, 0, 4) +/* bits 4:19 are Reserved, UNK/SBZP */ +FIELD(BXJ_ISS, COND, 20, 4) +FIELD(BXJ_ISS, CV, 24, 1) + static inline uint32_t syn_bxjtrap(int cv, int cond, int rm) { - return (EC_BXJTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL | - (cv << 24) | (cond << 20) | rm; + uint32_t res = syn_set_ec(0, EC_BXJTRAP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, BXJ_ISS, CV, cv); + res = FIELD_DP32(res, BXJ_ISS, COND, cond); + res = FIELD_DP32(res, BXJ_ISS, RM, rm); + + return res; } static inline uint32_t syn_gpc(int s2ptw, int ind, int gpcsc, int vncr, -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-10-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 30 +++++++++++++++++++++++++++--- 1 file changed, 27 insertions(+), 3 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_bxjtrap(int cv, int cond, int rm) return res; } +/* + * ISS encoding for a Granule Protection Check exception + * + * These are only reported to EL3 + */ +FIELD(GPC_ISS, xFSC, 0, 6) +FIELD(GPC_ISS, WnR, 6, 1) /* Write not Read */ +FIELD(GPC_ISS, S1PTW, 7, 1) +FIELD(GPC_ISS, CM, 8, 1) +FIELD(GPC_ISS, VNCR, 13, 1) +FIELD(GPC_ISS, GPCSC, 14, 6) +FIELD(GPC_ISS, InD, 20, 1) /* Instruction not Data access */ +FIELD(GPC_ISS, S2PTW, 21, 1) + static inline uint32_t syn_gpc(int s2ptw, int ind, int gpcsc, int vncr, int cm, int s1ptw, int wnr, int fsc) { - return (EC_GPC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (s2ptw << 21) - | (ind << 20) | (gpcsc << 14) | (vncr << 13) | (cm << 8) - | (s1ptw << 7) | (wnr << 6) | fsc; + uint32_t res = syn_set_ec(0, EC_GPC); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, GPC_ISS, S2PTW, s2ptw); + res = FIELD_DP32(res, GPC_ISS, InD, ind); + res = FIELD_DP32(res, GPC_ISS, GPCSC, gpcsc); + res = FIELD_DP32(res, GPC_ISS, VNCR, vncr); + res = FIELD_DP32(res, GPC_ISS, CM, cm); + res = FIELD_DP32(res, GPC_ISS, S1PTW, s1ptw); + res = FIELD_DP32(res, GPC_ISS, WnR, wnr); + res = FIELD_DP32(res, GPC_ISS, xFSC, fsc); + + return res; } static inline uint32_t syn_insn_abort(int same_el, int ea, int s1ptw, int fsc) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Migrate syn_insn_abort and syn_data_abort_* to the registerfields API. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20260422125250.1303100-11-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 87 ++++++++++++++++++++++++++++++++++++------- 1 file changed, 74 insertions(+), 13 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_gpc(int s2ptw, int ind, int gpcsc, int vncr, return res; } +/* + * ISS encoding for an exception from an Instruction Abort + * + * (aka instruction abort) + */ +FIELD(IABORT_ISS, IFSC, 0, 6) +FIELD(IABORT_ISS, S1PTW, 7, 1) +FIELD(IABORT_ISS, EA, 9, 1) +FIELD(IABORT_ISS, FnV, 10, 1) /* FAR not Valid */ +FIELD(IABORT_ISS, SET, 11, 2) +FIELD(IABORT_ISS, PFV, 14, 1) +FIELD(IABORT_ISS, TopLevel, 21, 1) /* FEAT_THE */ + static inline uint32_t syn_insn_abort(int same_el, int ea, int s1ptw, int fsc) { - return (EC_INSNABORT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | ARM_EL_IL | (ea << 9) | (s1ptw << 7) | fsc; + uint32_t res = syn_set_ec(0, EC_INSNABORT + same_el); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, IABORT_ISS, EA, ea); + res = FIELD_DP32(res, IABORT_ISS, S1PTW, s1ptw); + res = FIELD_DP32(res, IABORT_ISS, IFSC, fsc); + + return res; } +/* + * ISS encoding for an exception from a Data Abort + */ +FIELD(DABORT_ISS, DFSC, 0, 6) +FIELD(DABORT_ISS, WNR, 6, 1) +FIELD(DABORT_ISS, S1PTW, 7, 1) +FIELD(DABORT_ISS, CM, 8, 1) +FIELD(DABORT_ISS, EA, 9, 1) +FIELD(DABORT_ISS, FnV, 10, 1) +FIELD(DABORT_ISS, LST, 11, 2) +FIELD(DABORT_ISS, VNCR, 13, 1) +FIELD(DABORT_ISS, AR, 14, 1) +FIELD(DABORT_ISS, SF, 15, 1) +FIELD(DABORT_ISS, SRT, 16, 5) +FIELD(DABORT_ISS, SSE, 21, 1) +FIELD(DABORT_ISS, SAS, 22, 2) +FIELD(DABORT_ISS, ISV, 24, 1) + static inline uint32_t syn_data_abort_no_iss(int same_el, int fnv, int ea, int cm, int s1ptw, int wnr, int fsc) { - return (EC_DATAABORT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | ARM_EL_IL - | (fnv << 10) | (ea << 9) | (cm << 8) | (s1ptw << 7) - | (wnr << 6) | fsc; + uint32_t res = syn_set_ec(0, EC_DATAABORT + same_el); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, DABORT_ISS, FnV, fnv); + res = FIELD_DP32(res, DABORT_ISS, EA, ea); + res = FIELD_DP32(res, DABORT_ISS, CM, cm); + res = FIELD_DP32(res, DABORT_ISS, S1PTW, s1ptw); + res = FIELD_DP32(res, DABORT_ISS, WNR, wnr); + res = FIELD_DP32(res, DABORT_ISS, DFSC, fsc); + + return res; } static inline uint32_t syn_data_abort_with_iss(int same_el, @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_data_abort_with_iss(int same_el, int wnr, int fsc, bool is_16bit) { - return (EC_DATAABORT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | ARM_EL_ISV | (sas << 22) | (sse << 21) | (srt << 16) - | (sf << 15) | (ar << 14) - | (ea << 9) | (cm << 8) | (s1ptw << 7) | (wnr << 6) | fsc; + uint32_t res = syn_set_ec(0, EC_DATAABORT + same_el); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); + + res = FIELD_DP32(res, DABORT_ISS, ISV, 1); + res = FIELD_DP32(res, DABORT_ISS, SAS, sas); + res = FIELD_DP32(res, DABORT_ISS, SSE, sse); + res = FIELD_DP32(res, DABORT_ISS, SRT, srt); + res = FIELD_DP32(res, DABORT_ISS, SF, sf); + res = FIELD_DP32(res, DABORT_ISS, AR, ar); + res = FIELD_DP32(res, DABORT_ISS, EA, ea); + res = FIELD_DP32(res, DABORT_ISS, CM, cm); + res = FIELD_DP32(res, DABORT_ISS, S1PTW, s1ptw); + res = FIELD_DP32(res, DABORT_ISS, WNR, wnr); + res = FIELD_DP32(res, DABORT_ISS, DFSC, fsc); + + return res; } /* @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_data_abort_with_iss(int same_el, */ static inline uint32_t syn_data_abort_vncr(int ea, int wnr, int fsc) { - return (EC_DATAABORT << ARM_EL_EC_SHIFT) | (1 << ARM_EL_EC_SHIFT) - | ARM_EL_IL | ARM_EL_VNCR | (wnr << 6) | fsc; + uint32_t res = syn_set_ec(0, EC_DATAABORT_SAME_EL); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, DABORT_ISS, VNCR, 1); + res = FIELD_DP32(res, DABORT_ISS, WNR, wnr); + res = FIELD_DP32(res, DABORT_ISS, DFSC, fsc); + + return res; } static inline uint32_t syn_swstep(int same_el, int isv, int ex) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Migrate syn_swstep, syn_watchpoint and syn_breakpoint to the registerfields API. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-12-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 54 ++++++++++++++++++++++++++++++++++++++----- 1 file changed, 48 insertions(+), 6 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_data_abort_vncr(int ea, int wnr, int fsc) return res; } +/* + * ISS encoding for an exception from a Software Step exception. + */ +FIELD(SOFTSTEP_ISS, IFSC, 0, 6) +FIELD(SOFTSTEP_ISS, EX, 6, 1) +FIELD(SOFTSTEP_ISS, ISV, 24, 1) + static inline uint32_t syn_swstep(int same_el, int isv, int ex) { - return (EC_SOFTWARESTEP << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | ARM_EL_IL | (isv << 24) | (ex << 6) | 0x22; + uint32_t res = syn_set_ec(0, EC_SOFTWARESTEP + same_el); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, SOFTSTEP_ISS, ISV, isv); + res = FIELD_DP32(res, SOFTSTEP_ISS, EX, ex); + res = FIELD_DP32(res, SOFTSTEP_ISS, IFSC, 0x22); + + return res; } +/* + * ISS encoding for an exception from a Watchpoint exception + */ +FIELD(WATCHPOINT_ISS, DFSC, 0, 6) +FIELD(WATCHPOINT_ISS, WNR, 6, 1) +FIELD(WATCHPOINT_ISS, CM, 8, 1) +FIELD(WATCHPOINT_ISS, FnV, 10, 1) +FIELD(WATCHPOINT_ISS, VNCR, 13, 1) /* FEAT_NV2 */ +FIELD(WATCHPOINT_ISS, FnP, 15, 1) +FIELD(WATCHPOINT_ISS, WPF, 16, 1) +/* bellow mandatory from FEAT_Debugv8p9 */ +FIELD(WATCHPOINT_ISS, WPTV, 17, 1) /* FEAT_Debugv8p2 - WPT valid */ +FIELD(WATCHPOINT_ISS, WPT, 18, 6) /* FEAT_Debugv8p2 - missing WP number */ + static inline uint32_t syn_watchpoint(int same_el, int cm, int wnr) { - return (EC_WATCHPOINT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | ARM_EL_IL | (cm << 8) | (wnr << 6) | 0x22; + uint32_t res = syn_set_ec(0, EC_WATCHPOINT + same_el); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, WATCHPOINT_ISS, CM, cm); + res = FIELD_DP32(res, WATCHPOINT_ISS, WNR, wnr); + res = FIELD_DP32(res, WATCHPOINT_ISS, DFSC, 0x22); + + return res; } +/* + * ISS encoding for an exception from a Breakpoint or a Vector Catch + * debug exception. + */ +FIELD(BREAKPOINT_ISS, IFSC, 0, 6) + static inline uint32_t syn_breakpoint(int same_el) { - return (EC_BREAKPOINT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | ARM_EL_IL | 0x22; + uint32_t res = syn_set_ec(0, EC_BREAKPOINT + same_el); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, BREAKPOINT_ISS, IFSC, 0x22); + + return res; } static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> This will help later when we expand the fields we report. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-13-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_breakpoint(int same_el) return res; } +/* + * ISS encoding for an exception from a WF* instruction + */ +FIELD(WFX_ISS, TI, 0, 2) +FIELD(WFX_ISS, RV, 2, 1) +FIELD(WFX_ISS, RN, 5, 5) +FIELD(WFX_ISS, COND, 20, 4) +FIELD(WFX_ISS, CV, 24, 1) + static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit) { - return (EC_WFX_TRAP << ARM_EL_EC_SHIFT) | - (is_16bit ? 0 : (1 << ARM_EL_IL_SHIFT)) | - (cv << 24) | (cond << 20) | ti; + uint32_t res = syn_set_ec(0, EC_WFX_TRAP); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); + + res = FIELD_DP32(res, WFX_ISS, CV, cv); + res = FIELD_DP32(res, WFX_ISS, COND, cond); + res = FIELD_DP32(res, WFX_ISS, TI, ti); + + return res; } static inline uint32_t syn_illegalstate(void) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Tweak arg names to make it clear raddr is the data address register number. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-14-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 39 +++++++++++++++++++++++++++++++++------ 1 file changed, 33 insertions(+), 6 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_pcalignment(void) return res; } +/* + * ISS encoding for a GCS exception + * + * Field validity depends on EXTYPE + */ +FIELD(GCS_ISS, IT, 0, 5) +FIELD(GCS_ISS, RN, 5, 5) /* only for non EXLOCK exceptions */ +FIELD(GCS_ISS, RADDR, 10, 5) /* only for GCSSTR/GCSSTTR traps */ +FIELD(GCS_ISS, EXTYPE, 20, 4) + static inline uint32_t syn_gcs_data_check(GCSInstructionType it, int rn) { - return ((EC_GCS << ARM_EL_EC_SHIFT) | ARM_EL_IL | - (GCS_ET_DataCheck << 20) | (rn << 5) | it); + uint32_t res = syn_set_ec(0, EC_GCS); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, GCS_ISS, EXTYPE, GCS_ET_DataCheck); + res = FIELD_DP32(res, GCS_ISS, RN, rn); + res = FIELD_DP32(res, GCS_ISS, IT, it); + + return res; } static inline uint32_t syn_gcs_exlock(void) { - return (EC_GCS << ARM_EL_EC_SHIFT) | ARM_EL_IL | (GCS_ET_EXLOCK << 20); + uint32_t res = syn_set_ec(0, EC_GCS); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, GCS_ISS, EXTYPE, GCS_ET_EXLOCK); + + return res; } -static inline uint32_t syn_gcs_gcsstr(int ra, int rn) +static inline uint32_t syn_gcs_gcsstr(int raddr, int rn) { - return ((EC_GCS << ARM_EL_EC_SHIFT) | ARM_EL_IL | - (GCS_ET_GCSSTR_GCSSTTR << 20) | (ra << 10) | (rn << 5)); + uint32_t res = syn_set_ec(0, EC_GCS); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, GCS_ISS, EXTYPE, GCS_ET_GCSSTR_GCSSTTR); + res = FIELD_DP32(res, GCS_ISS, RADDR, raddr); + res = FIELD_DP32(res, GCS_ISS, RN, rn); + + return res; } static inline uint32_t syn_serror(uint32_t extra) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-15-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 33 +++++++++++++++++++++++++++++---- 1 file changed, 29 insertions(+), 4 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_serror(uint32_t extra) return res; } +/* + * ISS encoding for an exception from the Memory Copy and Memory Set + * instructions. + */ +FIELD(MOP_ISS, SIZEREG, 0, 5) +FIELD(MOP_ISS, SRCREG, 5, 5) +FIELD(MOP_ISS, DESTREG, 10, 5) +FIELD(MOP_ISS, FORMATOPT, 16, 2) +FIELD(MOP_ISS, OPT_A, 16, 1) +FIELD(MOP_ISS, WRONG_OPT, 17, 1) +FIELD(MOP_ISS, EPILOGUE, 18, 1) +FIELD(MOP_ISS, OPTIONS, 19, 4) +FIELD(MOP_ISS, IS_SETG, 23, 1) +FIELD(MOP_ISS, MEMINST, 24, 1) + static inline uint32_t syn_mop(bool is_set, bool is_setg, int options, bool epilogue, bool wrong_option, bool option_a, int destreg, int srcreg, int sizereg) { - return (EC_MOP << ARM_EL_EC_SHIFT) | ARM_EL_IL | - (is_set << 24) | (is_setg << 23) | (options << 19) | - (epilogue << 18) | (wrong_option << 17) | (option_a << 16) | - (destreg << 10) | (srcreg << 5) | sizereg; + uint32_t res = syn_set_ec(0, EC_MOP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, MOP_ISS, MEMINST, is_set); + res = FIELD_DP32(res, MOP_ISS, IS_SETG, is_setg); + res = FIELD_DP32(res, MOP_ISS, OPTIONS, options); + res = FIELD_DP32(res, MOP_ISS, EPILOGUE, epilogue); + res = FIELD_DP32(res, MOP_ISS, WRONG_OPT, wrong_option); + res = FIELD_DP32(res, MOP_ISS, OPT_A, option_a); + res = FIELD_DP32(res, MOP_ISS, DESTREG, destreg); + res = FIELD_DP32(res, MOP_ISS, SRCREG, srcreg); + res = FIELD_DP32(res, MOP_ISS, SIZEREG, sizereg); + + return res; } -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> It shares the same COPROC_ISS encoding as the other CP traps although not all the fields are used. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-16-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 16 ++++++++++++++++ target/arm/tcg/vfp_helper.c | 5 +---- 2 files changed, 17 insertions(+), 4 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ FIELD(COPROC_ISS, OP2, 17, 3) FIELD(COPROC_ISS, COND, 20, 4) FIELD(COPROC_ISS, CV, 24, 1) +static inline uint32_t syn_cp10_rt_trap(int cv, int cond, int opc1, + int crn, int rt, int isread) +{ + uint32_t res = syn_set_ec(0, EC_FPIDTRAP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, COPROC_ISS, CV, cv); + res = FIELD_DP32(res, COPROC_ISS, COND, cond); + res = FIELD_DP32(res, COPROC_ISS, OP1, opc1); + res = FIELD_DP32(res, COPROC_ISS, CRN, crn); + res = FIELD_DP32(res, COPROC_ISS, RT, rt); + res = FIELD_DP32(res, COPROC_ISS, ISREAD, isread); + + return res; +} + static inline uint32_t syn_cp14_rt_trap(int cv, int cond, int opc1, int opc2, int crn, int crm, int rt, int isread, bool is_16bit) diff --git a/target/arm/tcg/vfp_helper.c b/target/arm/tcg/vfp_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/vfp_helper.c +++ b/target/arm/tcg/vfp_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(check_hcr_el2_trap)(CPUARMState *env, uint32_t rt, uint32_t reg) g_assert_not_reached(); } - syndrome = ((EC_FPIDTRAP << ARM_EL_EC_SHIFT) - | ARM_EL_IL - | (1 << 24) | (0xe << 20) | (7 << 14) - | (reg << 10) | (rt << 5) | 1); + syndrome = syn_cp10_rt_trap(1, 0xe, 7, reg, rt, 1); raise_exception(env, EXCP_HYP_TRAP, syndrome, 2); } -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> One more step towards dropping the old #defines. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-17-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch32_hyp(CPUState *cs) */ if (cs->exception_index == EXCP_PREFETCH_ABORT || (cs->exception_index == EXCP_DATA_ABORT && - !(env->exception.syndrome & ARM_EL_ISV)) || + !FIELD_EX32(env->exception.syndrome, SYNDROME, IL)) || syn_get_ec(env->exception.syndrome) == EC_UNCATEGORIZED) { - env->exception.syndrome &= ~ARM_EL_IL; + env->exception.syndrome = FIELD_DP32(env->exception.syndrome, SYNDROME, IL, 0); } } env->cp15.esr_el[2] = env->exception.syndrome; -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> This removes the last use of ARM_EL_EC_SHIFT. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-18-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 1 - target/arm/tcg/debug.c | 2 +- 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ typedef enum { } GCSInstructionType; #define ARM_EL_EC_LENGTH 6 -#define ARM_EL_EC_SHIFT 26 #define ARM_EL_IL_SHIFT 25 #define ARM_EL_ISV_SHIFT 24 #define ARM_EL_IL (1 << ARM_EL_IL_SHIFT) diff --git a/target/arm/tcg/debug.c b/target/arm/tcg/debug.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/debug.c +++ b/target/arm/tcg/debug.c @@ -XXX,XX +XXX,XX @@ raise_exception_debug(CPUARMState *env, uint32_t excp, uint32_t syndrome) * Similarly for watchpoint and breakpoint matches. */ assert(debug_el >= cur_el); - syndrome |= (debug_el == cur_el) << ARM_EL_EC_SHIFT; + syndrome |= (debug_el == cur_el) << R_SYNDROME_EC_SHIFT; raise_exception(env, excp, syndrome, debug_el); } -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Rather than open coding a bunch of shifts and masks we can use the syndrome definitions. While we are at it assert it really is a EC_DATAABORT. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-19-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/whpx/whpx-all.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/target/arm/whpx/whpx-all.c b/target/arm/whpx/whpx-all.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/whpx/whpx-all.c +++ b/target/arm/whpx/whpx-all.c @@ -XXX,XX +XXX,XX @@ static int whpx_handle_mmio(CPUState *cpu, WHV_MEMORY_ACCESS_CONTEXT *ctx) { uint64_t syndrome = ctx->Syndrome; - bool isv = syndrome & ARM_EL_ISV; - bool iswrite = (syndrome >> 6) & 1; - bool sse = (syndrome >> 21) & 1; - uint32_t sas = (syndrome >> 22) & 3; + bool isv = FIELD_EX32(syndrome, DABORT_ISS, ISV); + bool iswrite = FIELD_EX32(syndrome, DABORT_ISS, WNR); + bool sse = FIELD_EX32(syndrome, DABORT_ISS, SSE); + uint32_t sas = FIELD_EX32(syndrome, DABORT_ISS, SAS); uint32_t len = 1 << sas; - uint32_t srt = (syndrome >> 16) & 0x1f; - uint32_t cm = (syndrome >> 8) & 0x1; + uint32_t srt = FIELD_EX32(syndrome, DABORT_ISS, SRT); + uint32_t cm = FIELD_EX32(syndrome, DABORT_ISS, CM); uint64_t val = 0; + assert(syn_get_ec(syndrome) == EC_DATAABORT); assert(!cm); assert(isv); -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Rather than open coding a bunch of shifts and masks we can use the syndrome definitions. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20260422125250.1303100-20-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/hvf/hvf.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/target/arm/hvf/hvf.c b/target/arm/hvf/hvf.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/hvf/hvf.c +++ b/target/arm/hvf/hvf.c @@ -XXX,XX +XXX,XX @@ static int hvf_handle_exception(CPUState *cpu, hv_vcpu_exit_exception_t *excp) break; } case EC_DATAABORT: { - bool isv = syndrome & ARM_EL_ISV; - bool iswrite = (syndrome >> 6) & 1; - bool s1ptw = (syndrome >> 7) & 1; - bool sse = (syndrome >> 21) & 1; - uint32_t sas = (syndrome >> 22) & 3; + bool isv = FIELD_EX32(syndrome, DABORT_ISS, ISV); + bool iswrite = FIELD_EX32(syndrome, DABORT_ISS, WNR); + bool s1ptw = FIELD_EX32(syndrome, DABORT_ISS, S1PTW); + bool sse = FIELD_EX32(syndrome, DABORT_ISS, SSE); + uint32_t sas = FIELD_EX32(syndrome, DABORT_ISS, SAS); uint32_t len = 1 << sas; - uint32_t srt = (syndrome >> 16) & 0x1f; - uint32_t cm = (syndrome >> 8) & 0x1; + uint32_t srt = FIELD_EX32(syndrome, DABORT_ISS, SRT); + uint32_t cm = FIELD_EX32(syndrome, DABORT_ISS, CM); uint64_t val = 0; uint64_t ipa = excp->physical_address; AddressSpace *as = cpu_get_address_space(cpu, ARMASIdx_NS); -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> One more step to removing the old defines. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-21-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/tlb_helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/tcg/tlb_helper.c b/target/arm/tcg/tlb_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/tlb_helper.c +++ b/target/arm/tcg/tlb_helper.c @@ -XXX,XX +XXX,XX @@ static inline uint64_t merge_syn_data_abort(uint32_t template_syn, */ assert(!fi->stage2); syn = syn_data_abort_vncr(fi->ea, is_write, fsc); - } else if (!(template_syn & ARM_EL_ISV) || target_el != 2 + } else if (!FIELD_EX32(template_syn, DABORT_ISS, ISV) || target_el != 2 || fi->s1ptw || !fi->stage2) { syn = syn_data_abort_no_iss(same_el, 0, fi->ea, 0, fi->s1ptw, is_write, fsc); -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> These are only valid for data abort syndromes. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-22-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/tlb_helper.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/tcg/tlb_helper.c b/target/arm/tcg/tlb_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/tlb_helper.c +++ b/target/arm/tcg/tlb_helper.c @@ -XXX,XX +XXX,XX @@ static inline uint64_t merge_syn_data_abort(uint32_t template_syn, * ST64BV, or ST64BV0 insns report syndrome info even for stage-1 * faults and regardless of the target EL. */ - if (template_syn & ARM_EL_VNCR) { + if (FIELD_EX32(template_syn, DABORT_ISS, VNCR)) { /* * FEAT_NV2 faults on accesses via VNCR_EL2 are a special case: * they are always reported as "same EL", even though we are going @@ -XXX,XX +XXX,XX @@ void arm_deliver_fault(ARMCPU *cpu, vaddr addr, * because we masked that out in disas_set_insn_syndrome()) */ bool is_vncr = (access_type != MMU_INST_FETCH) && - (env->exception.syndrome & ARM_EL_VNCR); + FIELD_EX32(env->exception.syndrome, DABORT_ISS, VNCR); if (is_vncr) { /* FEAT_NV2 faults on accesses via VNCR_EL2 go to EL2 */ -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Now everything is defined with registerfields we can drop the old defines. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-23-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 9 --------- 1 file changed, 9 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ typedef enum { GCS_IT_GCSPOPX = 9, } GCSInstructionType; -#define ARM_EL_EC_LENGTH 6 -#define ARM_EL_IL_SHIFT 25 -#define ARM_EL_ISV_SHIFT 24 -#define ARM_EL_IL (1 << ARM_EL_IL_SHIFT) -#define ARM_EL_ISV (1 << ARM_EL_ISV_SHIFT) - -/* In the Data Abort syndrome */ -#define ARM_EL_VNCR (1 << 13) - static inline uint32_t syn_get_ec(uint32_t syn) { return FIELD_EX32(syn, SYNDROME, EC); -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Pass the register number (rd) to the wfit helper and report it in the syndrome ISS. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-24-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 11 ++++++++++- target/arm/tcg/helper-defs.h | 2 +- target/arm/tcg/op_helper.c | 7 ++++--- target/arm/tcg/translate-a64.c | 2 +- 4 files changed, 16 insertions(+), 6 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ FIELD(WFX_ISS, RN, 5, 5) FIELD(WFX_ISS, COND, 20, 4) FIELD(WFX_ISS, CV, 24, 1) -static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit) +typedef enum { + WFI = 0b00, + WFE = 0b01, + WFIT = 0b10, + WFET = 0xb11 +} wfx_ti; + +static inline uint32_t syn_wfx(int cv, int cond, int rn, bool rv, wfx_ti ti, bool is_16bit) { uint32_t res = syn_set_ec(0, EC_WFX_TRAP); res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit) res = FIELD_DP32(res, WFX_ISS, CV, cv); res = FIELD_DP32(res, WFX_ISS, COND, cond); res = FIELD_DP32(res, WFX_ISS, TI, ti); + res = FIELD_DP32(res, WFX_ISS, RN, rn); + res = FIELD_DP32(res, WFX_ISS, RV, rv); return res; } diff --git a/target/arm/tcg/helper-defs.h b/target/arm/tcg/helper-defs.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/helper-defs.h +++ b/target/arm/tcg/helper-defs.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_2(exception_pc_alignment, noreturn, env, vaddr) DEF_HELPER_1(setend, void, env) DEF_HELPER_2(wfi, void, env, i32) DEF_HELPER_1(wfe, void, env) -DEF_HELPER_2(wfit, void, env, i64) +DEF_HELPER_2(wfit, void, env, i32) DEF_HELPER_1(yield, void, env) DEF_HELPER_1(pre_hvc, void, env) DEF_HELPER_2(pre_smc, void, env, i32) diff --git a/target/arm/tcg/op_helper.c b/target/arm/tcg/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/op_helper.c +++ b/target/arm/tcg/op_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(wfi)(CPUARMState *env, uint32_t insn_len) env->regs[15] -= insn_len; } - raise_exception(env, excp, syn_wfx(1, 0xe, 0, insn_len == 2), + raise_exception(env, excp, syn_wfx(1, 0xe, 0, false, WFI, insn_len == 2), target_el); } @@ -XXX,XX +XXX,XX @@ void HELPER(wfi)(CPUARMState *env, uint32_t insn_len) #endif } -void HELPER(wfit)(CPUARMState *env, uint64_t timeout) +void HELPER(wfit)(CPUARMState *env, uint32_t rd) { #ifdef CONFIG_USER_ONLY /* @@ -XXX,XX +XXX,XX @@ void HELPER(wfit)(CPUARMState *env, uint64_t timeout) int target_el = check_wfx_trap(env, false, &excp); /* The WFIT should time out when CNTVCT_EL0 >= the specified value. */ uint64_t cntval = gt_get_countervalue(env); + uint64_t timeout = env->xregs[rd]; /* * We want the value that we would get if we read CNTVCT_EL0 from * the current exception level, so the direct_access offset, not @@ -XXX,XX +XXX,XX @@ void HELPER(wfit)(CPUARMState *env, uint64_t timeout) if (target_el) { env->pc -= 4; - raise_exception(env, excp, syn_wfx(1, 0xe, 2, false), target_el); + raise_exception(env, excp, syn_wfx(1, 0xe, rd, true, WFIT, false), target_el); } if (uadd64_overflow(timeout, offset, &nexttick)) { diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool trans_WFIT(DisasContext *s, arg_WFIT *a) } gen_a64_update_pc(s, 4); - gen_helper_wfit(tcg_env, cpu_reg(s, a->rd)); + gen_helper_wfit(tcg_env, tcg_constant_i32(a->rd)); /* Go back to the main loop to check for interrupts */ s->base.is_jmp = DISAS_EXIT; return true; -- 2.43.0