Series comparison

target-arm queue: the big stuff here is the final part of
rth's patches for Cortex-A76 and Neoverse-N1 support;
also present are Gavin's NUMA series and a few other things.

thanks
-- PMM

The following changes since commit 554623226f800acf48a2ed568900c1c968ec9a8b:

Merge tag 'qemu-sparc-20220508' of https://github.com/mcayland/qemu into staging (2022-05-08 17:03:26 -0500)

are available in the Git repository at:

https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20220509

for you to fetch changes up to ae9141d4a3265553503bf07d3574b40f84615a34:

hw/acpi/aml-build: Use existing CPU topology to build PPTT table (2022-05-09 11:47:55 +0100)

----------------------------------------------------------------
target-arm queue:
 * MAINTAINERS/.mailmap: update email for Leif Lindholm
 * hw/arm: add version information to sbsa-ref machine DT
 * Enable new features for -cpu max:
   FEAT_Debugv8p2, FEAT_Debugv8p4, FEAT_RAS (minimal version only),
   FEAT_IESB, FEAT_CSV2, FEAT_CSV2_2, FEAT_CSV3, FEAT_DGH
 * Emulate Cortex-A76
 * Emulate Neoverse-N1
 * Fix the virt board default NUMA topology

----------------------------------------------------------------
Gavin Shan (6):
      qapi/machine.json: Add cluster-id
      qtest/numa-test: Specify CPU topology in aarch64_numa_cpu()
      hw/arm/virt: Consider SMP configuration in CPU topology
      qtest/numa-test: Correct CPU and NUMA association in aarch64_numa_cpu()
      hw/arm/virt: Fix CPU's default NUMA node ID
      hw/acpi/aml-build: Use existing CPU topology to build PPTT table

Leif Lindholm (2):
      MAINTAINERS/.mailmap: update email for Leif Lindholm
      hw/arm: add versioning to sbsa-ref machine DT

Richard Henderson (24):
      target/arm: Handle cpreg registration for missing EL
      target/arm: Drop EL3 no EL2 fallbacks
      target/arm: Merge zcr reginfo
      target/arm: Adjust definition of CONTEXTIDR_EL2
      target/arm: Move cortex impdef sysregs to cpu_tcg.c
      target/arm: Update qemu-system-arm -cpu max to cortex-a57
      target/arm: Set ID_DFR0.PerfMon for qemu-system-arm -cpu max
      target/arm: Split out aa32_max_features
      target/arm: Annotate arm_max_initfn with FEAT identifiers
      target/arm: Use field names for manipulating EL2 and EL3 modes
      target/arm: Enable FEAT_Debugv8p2 for -cpu max
      target/arm: Enable FEAT_Debugv8p4 for -cpu max
      target/arm: Add minimal RAS registers
      target/arm: Enable SCR and HCR bits for RAS
      target/arm: Implement virtual SError exceptions
      target/arm: Implement ESB instruction
      target/arm: Enable FEAT_RAS for -cpu max
      target/arm: Enable FEAT_IESB for -cpu max
      target/arm: Enable FEAT_CSV2 for -cpu max
      target/arm: Enable FEAT_CSV2_2 for -cpu max
      target/arm: Enable FEAT_CSV3 for -cpu max
      target/arm: Enable FEAT_DGH for -cpu max
      target/arm: Define cortex-a76
      target/arm: Define neoverse-n1

From: Leif Lindholm <quic_llindhol@quicinc.com>

NUVIA was acquired by Qualcomm in March 2021, but kept functioning on
separate infrastructure for a transitional period. We've now switched
over to contributing as Qualcomm Innovation Center (quicinc), so update
my email address to reflect this.

Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com>
Message-id: 20220505113740.75565-1-quic_llindhol@quicinc.com
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[Fixed commit message typo]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 .mailmap    | 3 ++-
 MAINTAINERS | 2 +-
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/.mailmap b/.mailmap
index XXXXXXX..XXXXXXX 100644
--- a/.mailmap
+++ b/.mailmap
@@ -XXX,XX +XXX,XX @@ Greg Kurz <groug@kaod.org> <gkurz@linux.vnet.ibm.com>
 Huacai Chen <chenhuacai@kernel.org> <chenhc@lemote.com>
 Huacai Chen <chenhuacai@kernel.org> <chenhuacai@loongson.cn>
 James Hogan <jhogan@kernel.org> <james.hogan@imgtec.com>
-Leif Lindholm <leif@nuviainc.com> <leif.lindholm@linaro.org>
+Leif Lindholm <quic_llindhol@quicinc.com> <leif.lindholm@linaro.org>
+Leif Lindholm <quic_llindhol@quicinc.com> <leif@nuviainc.com>
 Radoslaw Biernacki <rad@semihalf.com> <radoslaw.biernacki@linaro.org>
 Paul Burton <paulburton@kernel.org> <paul.burton@mips.com>
 Paul Burton <paulburton@kernel.org> <paul.burton@imgtec.com>
diff --git a/MAINTAINERS b/MAINTAINERS
index XXXXXXX..XXXXXXX 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -XXX,XX +XXX,XX @@ F: include/hw/ssi/imx_spi.h
 SBSA-REF
 M: Radoslaw Biernacki <rad@semihalf.com>
 M: Peter Maydell <peter.maydell@linaro.org>
-R: Leif Lindholm <leif@nuviainc.com>
+R: Leif Lindholm <quic_llindhol@quicinc.com>
 L: qemu-arm@nongnu.org
 S: Maintained
 F: hw/arm/sbsa-ref.c
-- 
2.25.1

From: Richard Henderson <richard.henderson@linaro.org>

More gracefully handle cpregs when EL2 and/or EL3 are missing.
If the reg is entirely inaccessible, do not register it at all.
If the reg is for EL2, and EL3 is present but EL2 is not,
either discard, squash to res0, const, or keep unchanged.

Per rule RJFFP, mark the 4 aarch32 hypervisor access registers
with ARM_CP_EL3_NO_EL2_KEEP, and mark all of the EL2 address
translation and tlb invalidation "regs" ARM_CP_EL3_NO_EL2_UNDEF.
Mark the 2 virtualization processor id regs ARM_CP_EL3_NO_EL2_C_NZ.

This will simplify cpreg registration for conditional arm features.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpregs.h |  11 +++
 target/arm/helper.c | 178 ++++++++++++++++++++++++++++++--------------
 2 files changed, 133 insertions(+), 56 deletions(-)

diff --git a/target/arm/cpregs.h b/target/arm/cpregs.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpregs.h
+++ b/target/arm/cpregs.h
@@ -XXX,XX +XXX,XX @@ enum {
     ARM_CP_SVE                   = 1 << 14,
     /* Flag: Do not expose in gdb sysreg xml. */
     ARM_CP_NO_GDB                = 1 << 15,
+    /*
+     * Flags: If EL3 but not EL2...
+     *   - UNDEF: discard the cpreg,
+     *   -  KEEP: retain the cpreg as is,
+     *   -  C_NZ: set const on the cpreg, but retain resetvalue,
+     *   -  else: set const on the cpreg, zero resetvalue, aka RES0.
+     * See rule RJFFP in section D1.1.3 of DDI0487H.a.
+     */
+    ARM_CP_EL3_NO_EL2_UNDEF      = 1 << 16,
+    ARM_CP_EL3_NO_EL2_KEEP       = 1 << 17,
+    ARM_CP_EL3_NO_EL2_C_NZ       = 1 << 18,
 };
 
 /*
diff --git a/target/arm/helper.c b/target/arm/helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = {
       .access = PL1_RW, .readfn = spsel_read, .writefn = spsel_write },
     { .name = "FPEXC32_EL2", .state = ARM_CP_STATE_AA64,
       .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 3, .opc2 = 0,
-      .access = PL2_RW, .type = ARM_CP_ALIAS | ARM_CP_FPU,
+      .access = PL2_RW,
+      .type = ARM_CP_ALIAS | ARM_CP_FPU | ARM_CP_EL3_NO_EL2_KEEP,
       .fieldoffset = offsetof(CPUARMState, vfp.xregs[ARM_VFP_FPEXC]) },
     { .name = "DACR32_EL2", .state = ARM_CP_STATE_AA64,
       .opc0 = 3, .opc1 = 4, .crn = 3, .crm = 0, .opc2 = 0,
-      .access = PL2_RW, .resetvalue = 0,
+      .access = PL2_RW, .resetvalue = 0, .type = ARM_CP_EL3_NO_EL2_KEEP,
       .writefn = dacr_write, .raw_writefn = raw_write,
       .fieldoffset = offsetof(CPUARMState, cp15.dacr32_el2) },
     { .name = "IFSR32_EL2", .state = ARM_CP_STATE_AA64,
       .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 0, .opc2 = 1,
-      .access = PL2_RW, .resetvalue = 0,
+      .access = PL2_RW, .resetvalue = 0, .type = ARM_CP_EL3_NO_EL2_KEEP,
       .fieldoffset = offsetof(CPUARMState, cp15.ifsr32_el2) },
     { .name = "SPSR_IRQ", .state = ARM_CP_STATE_AA64,
       .type = ARM_CP_ALIAS,
@@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo el2_cp_reginfo[] = {
       .writefn = tlbimva_hyp_is_write },
     { .name = "TLBI_ALLE2", .state = ARM_CP_STATE_AA64,
       .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 0,
-      .type = ARM_CP_NO_RAW, .access = PL2_W,
+      .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF,
       .writefn = tlbi_aa64_alle2_write },
     { .name = "TLBI_VAE2", .state = ARM_CP_STATE_AA64,
       .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 1,
-      .type = ARM_CP_NO_RAW, .access = PL2_W,
+      .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF,
       .writefn = tlbi_aa64_vae2_write },
     { .name = "TLBI_VALE2", .state = ARM_CP_STATE_AA64,
       .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 5,
-      .access = PL2_W, .type = ARM_CP_NO_RAW,
+      .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF,
       .writefn = tlbi_aa64_vae2_write },
     { .name = "TLBI_ALLE2IS", .state = ARM_CP_STATE_AA64,
       .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 0,
-      .access = PL2_W, .type = ARM_CP_NO_RAW,
+      .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF,
       .writefn = tlbi_aa64_alle2is_write },
     { .name = "TLBI_VAE2IS", .state = ARM_CP_STATE_AA64,
       .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 1,
-      .type = ARM_CP_NO_RAW, .access = PL2_W,
+      .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF,
       .writefn = tlbi_aa64_vae2is_write },
     { .name = "TLBI_VALE2IS", .state = ARM_CP_STATE_AA64,
       .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 5,
-      .access = PL2_W, .type = ARM_CP_NO_RAW,
+      .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF,
       .writefn = tlbi_aa64_vae2is_write },
 #ifndef CONFIG_USER_ONLY
     /* Unlike the other EL2-related AT operations, these must
@@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo el2_cp_reginfo[] = {
     { .name = "AT_S1E2R", .state = ARM_CP_STATE_AA64,
       .opc0 = 1, .opc1 = 4, .crn = 7, .crm = 8, .opc2 = 0,
       .access = PL2_W, .accessfn = at_s1e2_access,
-      .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, .writefn = ats_write64 },
+      .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC | ARM_CP_EL3_NO_EL2_UNDEF,
+      .writefn = ats_write64 },
     { .name = "AT_S1E2W", .state = ARM_CP_STATE_AA64,
       .opc0 = 1, .opc1 = 4, .crn = 7, .crm = 8, .opc2 = 1,
       .access = PL2_W, .accessfn = at_s1e2_access,
-      .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, .writefn = ats_write64 },
+      .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC | ARM_CP_EL3_NO_EL2_UNDEF,
+      .writefn = ats_write64 },
     /* The AArch32 ATS1H* operations are CONSTRAINED UNPREDICTABLE
      * if EL2 is not implemented; we choose to UNDEF. Behaviour at EL3
      * with SCR.NS == 0 outside Monitor mode is UNPREDICTABLE; we choose
@@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo debug_cp_reginfo[] = {
     { .name = "DBGVCR32_EL2", .state = ARM_CP_STATE_AA64,
       .opc0 = 2, .opc1 = 4, .crn = 0, .crm = 7, .opc2 = 0,
       .access = PL2_RW, .accessfn = access_tda,
-      .type = ARM_CP_NOP },
+      .type = ARM_CP_NOP | ARM_CP_EL3_NO_EL2_KEEP },
     /* Dummy MDCCINT_EL1, since we don't implement the Debug Communications
      * Channel but Linux may try to access this register. The 32-bit
      * alias is DBGDCCINT.
@@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo tlbirange_reginfo[] = {
       .access = PL2_W, .type = ARM_CP_NOP },
     { .name = "TLBI_RVAE2IS", .state = ARM_CP_STATE_AA64,
       .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 2, .opc2 = 1,
-      .access = PL2_W, .type = ARM_CP_NO_RAW,
+      .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF,
       .writefn = tlbi_aa64_rvae2is_write },
    { .name = "TLBI_RVALE2IS", .state = ARM_CP_STATE_AA64,
       .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 2, .opc2 = 5,
-      .access = PL2_W, .type = ARM_CP_NO_RAW,
+      .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF,
       .writefn = tlbi_aa64_rvae2is_write },
     { .name = "TLBI_RIPAS2E1", .state = ARM_CP_STATE_AA64,
       .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 4, .opc2 = 2,
@@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo tlbirange_reginfo[] = {
       .access = PL2_W, .type = ARM_CP_NOP },
    { .name = "TLBI_RVAE2OS", .state = ARM_CP_STATE_AA64,
       .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 5, .opc2 = 1,
-      .access = PL2_W, .type = ARM_CP_NO_RAW,
+      .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF,
       .writefn = tlbi_aa64_rvae2is_write },
    { .name = "TLBI_RVALE2OS", .state = ARM_CP_STATE_AA64,
       .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 5, .opc2 = 5,
-      .access = PL2_W, .type = ARM_CP_NO_RAW,
+      .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF,
       .writefn = tlbi_aa64_rvae2is_write },
     { .name = "TLBI_RVAE2", .state = ARM_CP_STATE_AA64,
       .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 6, .opc2 = 1,
-      .access = PL2_W, .type = ARM_CP_NO_RAW,
+      .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF,
       .writefn = tlbi_aa64_rvae2_write },
    { .name = "TLBI_RVALE2", .state = ARM_CP_STATE_AA64,
       .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 6, .opc2 = 5,
-      .access = PL2_W, .type = ARM_CP_NO_RAW,
+      .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF,
       .writefn = tlbi_aa64_rvae2_write },
    { .name = "TLBI_RVAE3IS", .state = ARM_CP_STATE_AA64,
       .opc0 = 1, .opc1 = 6, .crn = 8, .crm = 2, .opc2 = 1,
@@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo tlbios_reginfo[] = {
       .writefn = tlbi_aa64_vae1is_write },
     { .name = "TLBI_ALLE2OS", .state = ARM_CP_STATE_AA64,
       .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 1, .opc2 = 0,
-      .access = PL2_W, .type = ARM_CP_NO_RAW,
+      .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF,
       .writefn = tlbi_aa64_alle2is_write },
     { .name = "TLBI_VAE2OS", .state = ARM_CP_STATE_AA64,
       .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 1, .opc2 = 1,
-      .access = PL2_W, .type = ARM_CP_NO_RAW,
+      .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF,
       .writefn = tlbi_aa64_vae2is_write },
    { .name = "TLBI_ALLE1OS", .state = ARM_CP_STATE_AA64,
       .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 1, .opc2 = 4,
@@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo tlbios_reginfo[] = {
       .writefn = tlbi_aa64_alle1is_write },
     { .name = "TLBI_VALE2OS", .state = ARM_CP_STATE_AA64,
       .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 1, .opc2 = 5,
-      .access = PL2_W, .type = ARM_CP_NO_RAW,
+      .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF,
       .writefn = tlbi_aa64_vae2is_write },
     { .name = "TLBI_VMALLS12E1OS", .state = ARM_CP_STATE_AA64,
       .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 1, .opc2 = 6,
@@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu)
             { .name = "VPIDR", .state = ARM_CP_STATE_AA32,
               .cp = 15, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 0,
               .access = PL2_RW, .accessfn = access_el3_aa32ns,
-              .resetvalue = cpu->midr, .type = ARM_CP_ALIAS,
+              .resetvalue = cpu->midr,
+              .type = ARM_CP_ALIAS | ARM_CP_EL3_NO_EL2_C_NZ,
               .fieldoffset = offsetoflow32(CPUARMState, cp15.vpidr_el2) },
             { .name = "VPIDR_EL2", .state = ARM_CP_STATE_AA64,
               .opc0 = 3, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 0,
               .access = PL2_RW, .resetvalue = cpu->midr,
+              .type = ARM_CP_EL3_NO_EL2_C_NZ,
               .fieldoffset = offsetof(CPUARMState, cp15.vpidr_el2) },
             { .name = "VMPIDR", .state = ARM_CP_STATE_AA32,
               .cp = 15, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 5,
               .access = PL2_RW, .accessfn = access_el3_aa32ns,
-              .resetvalue = vmpidr_def, .type = ARM_CP_ALIAS,
+              .resetvalue = vmpidr_def,
+              .type = ARM_CP_ALIAS | ARM_CP_EL3_NO_EL2_C_NZ,
               .fieldoffset = offsetoflow32(CPUARMState, cp15.vmpidr_el2) },
             { .name = "VMPIDR_EL2", .state = ARM_CP_STATE_AA64,
               .opc0 = 3, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 5,
-              .access = PL2_RW,
-              .resetvalue = vmpidr_def,
+              .access = PL2_RW, .resetvalue = vmpidr_def,
+              .type = ARM_CP_EL3_NO_EL2_C_NZ,
               .fieldoffset = offsetof(CPUARMState, cp15.vmpidr_el2) },
         };
         define_arm_cp_regs(cpu, vpidr_regs);
@@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r,
                                    int crm, int opc1, int opc2,
                                    const char *name)
 {
+    CPUARMState *env = &cpu->env;
     uint32_t key;
     ARMCPRegInfo *r2;
     bool is64 = r->type & ARM_CP_64BIT;
     bool ns = secstate & ARM_CP_SECSTATE_NS;
     int cp = r->cp;
-    bool isbanked;
     size_t name_len;
+    bool make_const;
 
     switch (state) {
     case ARM_CP_STATE_AA32:
@@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r,
         }
     }
 
+    /*
+     * Eliminate registers that are not present because the EL is missing.
+     * Doing this here makes it easier to put all registers for a given
+     * feature into the same ARMCPRegInfo array and define them all at once.
+     */
+    make_const = false;
+    if (arm_feature(env, ARM_FEATURE_EL3)) {
+        /*
+         * An EL2 register without EL2 but with EL3 is (usually) RES0.
+         * See rule RJFFP in section D1.1.3 of DDI0487H.a.
+         */
+        int min_el = ctz32(r->access) / 2;
+        if (min_el == 2 && !arm_feature(env, ARM_FEATURE_EL2)) {
+            if (r->type & ARM_CP_EL3_NO_EL2_UNDEF) {
+                return;
+            }
+            make_const = !(r->type & ARM_CP_EL3_NO_EL2_KEEP);
+        }
+    } else {
+        CPAccessRights max_el = (arm_feature(env, ARM_FEATURE_EL2)
+                                 ? PL2_RW : PL1_RW);
+        if ((r->access & max_el) == 0) {
+            return;
+        }
+    }
+
     /* Combine cpreg and name into one allocation. */
     name_len = strlen(name) + 1;
     r2 = g_malloc(sizeof(*r2) + name_len);
@@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r,
         r2->opaque = opaque;
     }
 
-    isbanked = r->bank_fieldoffsets[0] && r->bank_fieldoffsets[1];
-    if (isbanked) {
+    if (make_const) {
+        /* This should not have been a very special register to begin. */
+        int old_special = r2->type & ARM_CP_SPECIAL_MASK;
+        assert(old_special == 0 || old_special == ARM_CP_NOP);
         /*
-         * Register is banked (using both entries in array).
-         * Overwriting fieldoffset as the array is only used to define
-         * banked registers but later only fieldoffset is used.
+         * Set the special function to CONST, retaining the other flags.
+         * This is important for e.g. ARM_CP_SVE so that we still
+         * take the SVE trap if CPTR_EL3.EZ == 0.
          */
-        r2->fieldoffset = r->bank_fieldoffsets[ns];
-    }
+        r2->type = (r2->type & ~ARM_CP_SPECIAL_MASK) | ARM_CP_CONST;
+        /*
+         * Usually, these registers become RES0, but there are a few
+         * special cases like VPIDR_EL2 which have a constant non-zero
+         * value with writes ignored.
+         */
+        if (!(r->type & ARM_CP_EL3_NO_EL2_C_NZ)) {
+            r2->resetvalue = 0;
+        }
+        /*
+         * ARM_CP_CONST has precedence, so removing the callbacks and
+         * offsets are not strictly necessary, but it is potentially
+         * less confusing to debug later.
+         */
+        r2->readfn = NULL;
+        r2->writefn = NULL;
+        r2->raw_readfn = NULL;
+        r2->raw_writefn = NULL;
+        r2->resetfn = NULL;
+        r2->fieldoffset = 0;
+        r2->bank_fieldoffsets[0] = 0;
+        r2->bank_fieldoffsets[1] = 0;
+    } else {
+        bool isbanked = r->bank_fieldoffsets[0] && r->bank_fieldoffsets[1];
 
-    if (state == ARM_CP_STATE_AA32) {
         if (isbanked) {
             /*
-             * If the register is banked then we don't need to migrate or
-             * reset the 32-bit instance in certain cases:
-             *
-             * 1) If the register has both 32-bit and 64-bit instances then we
-             *    can count on the 64-bit instance taking care of the
-             *    non-secure bank.
-             * 2) If ARMv8 is enabled then we can count on a 64-bit version
-             *    taking care of the secure bank.  This requires that separate
-             *    32 and 64-bit definitions are provided.
+             * Register is banked (using both entries in array).
+             * Overwriting fieldoffset as the array is only used to define
+             * banked registers but later only fieldoffset is used.
              */
-            if ((r->state == ARM_CP_STATE_BOTH && ns) ||
-                (arm_feature(&cpu->env, ARM_FEATURE_V8) && !ns)) {
+            r2->fieldoffset = r->bank_fieldoffsets[ns];
+        }
+        if (state == ARM_CP_STATE_AA32) {
+            if (isbanked) {
+                /*
+                 * If the register is banked then we don't need to migrate or
+                 * reset the 32-bit instance in certain cases:
+                 *
+                 * 1) If the register has both 32-bit and 64-bit instances
+                 *    then we can count on the 64-bit instance taking care
+                 *    of the non-secure bank.
+                 * 2) If ARMv8 is enabled then we can count on a 64-bit
+                 *    version taking care of the secure bank.  This requires
+                 *    that separate 32 and 64-bit definitions are provided.
+                 */
+                if ((r->state == ARM_CP_STATE_BOTH && ns) ||
+                    (arm_feature(env, ARM_FEATURE_V8) && !ns)) {
+                    r2->type |= ARM_CP_ALIAS;
+                }
+            } else if ((secstate != r->secure) && !ns) {
+                /*
+                 * The register is not banked so we only want to allow
+                 * migration of the non-secure instance.
+                 */
                 r2->type |= ARM_CP_ALIAS;
             }
-        } else if ((secstate != r->secure) && !ns) {
-            /*
-             * The register is not banked so we only want to allow migration
-             * of the non-secure instance.
-             */
-            r2->type |= ARM_CP_ALIAS;
-        }
 
-        if (HOST_BIG_ENDIAN &&
-            r->state == ARM_CP_STATE_BOTH && r2->fieldoffset) {
-            r2->fieldoffset += sizeof(uint32_t);
+            if (HOST_BIG_ENDIAN &&
+                r->state == ARM_CP_STATE_BOTH && r2->fieldoffset) {
+                r2->fieldoffset += sizeof(uint32_t);
+            }
         }
     }
 
@@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r,
      * multiple times. Special registers (ie NOP/WFI) are
      * never migratable and not even raw-accessible.
      */
-    if (r->type & ARM_CP_SPECIAL_MASK) {
+    if (r2->type & ARM_CP_SPECIAL_MASK) {
         r2->type |= ARM_CP_NO_RAW;
     }
     if (((r->crm == CP_ANY) && crm != 0) ||
-- 
2.25.1

From: Richard Henderson <richard.henderson@linaro.org>

Drop el3_no_el2_cp_reginfo, el3_no_el2_v8_cp_reginfo, and the local
vpidr_regs definition, and rely on the squashing to ARM_CP_CONST
while registering for v8.

This is a behavior change for v7 cpus with Security Extensions and
without Virtualization Extensions, in that the virtualization cpregs
are now correctly not present.  This would be a migration compatibility
break, except that we have an existing bug in which migration of 32-bit
cpus with Security Extensions enabled does not work.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/helper.c | 158 ++++----------------------------------------
 1 file changed, 13 insertions(+), 145 deletions(-)

diff --git a/target/arm/helper.c b/target/arm/helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = {
       .fieldoffset = offsetoflow32(CPUARMState, cp15.mdcr_el3) },
 };
 
-/* Used to describe the behaviour of EL2 regs when EL2 does not exist.  */
-static const ARMCPRegInfo el3_no_el2_cp_reginfo[] = {
-    { .name = "VBAR_EL2", .state = ARM_CP_STATE_BOTH,
-      .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 0, .opc2 = 0,
-      .access = PL2_RW,
-      .readfn = arm_cp_read_zero, .writefn = arm_cp_write_ignore },
-    { .name = "HCR_EL2", .state = ARM_CP_STATE_BOTH,
-      .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 0,
-      .access = PL2_RW,
-      .type = ARM_CP_CONST, .resetvalue = 0 },
-    { .name = "HACR_EL2", .state = ARM_CP_STATE_BOTH,
-      .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 7,
-      .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
-    { .name = "ESR_EL2", .state = ARM_CP_STATE_BOTH,
-      .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 2, .opc2 = 0,
-      .access = PL2_RW,
-      .type = ARM_CP_CONST, .resetvalue = 0 },
-    { .name = "CPTR_EL2", .state = ARM_CP_STATE_BOTH,
-      .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 2,
-      .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
-    { .name = "MAIR_EL2", .state = ARM_CP_STATE_BOTH,
-      .opc0 = 3, .opc1 = 4, .crn = 10, .crm = 2, .opc2 = 0,
-      .access = PL2_RW, .type = ARM_CP_CONST,
-      .resetvalue = 0 },
-    { .name = "HMAIR1", .state = ARM_CP_STATE_AA32,
-      .cp = 15, .opc1 = 4, .crn = 10, .crm = 2, .opc2 = 1,
-      .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
-    { .name = "AMAIR_EL2", .state = ARM_CP_STATE_BOTH,
-      .opc0 = 3, .opc1 = 4, .crn = 10, .crm = 3, .opc2 = 0,
-      .access = PL2_RW, .type = ARM_CP_CONST,
-      .resetvalue = 0 },
-    { .name = "HAMAIR1", .state = ARM_CP_STATE_AA32,
-      .cp = 15, .opc1 = 4, .crn = 10, .crm = 3, .opc2 = 1,
-      .access = PL2_RW, .type = ARM_CP_CONST,
-      .resetvalue = 0 },
-    { .name = "AFSR0_EL2", .state = ARM_CP_STATE_BOTH,
-      .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 1, .opc2 = 0,
-      .access = PL2_RW, .type = ARM_CP_CONST,
-      .resetvalue = 0 },
-    { .name = "AFSR1_EL2", .state = ARM_CP_STATE_BOTH,
-      .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 1, .opc2 = 1,
-      .access = PL2_RW, .type = ARM_CP_CONST,
-      .resetvalue = 0 },
-    { .name = "TCR_EL2", .state = ARM_CP_STATE_BOTH,
-      .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 0, .opc2 = 2,
-      .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
-    { .name = "VTCR_EL2", .state = ARM_CP_STATE_BOTH,
-      .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 1, .opc2 = 2,
-      .access = PL2_RW, .accessfn = access_el3_aa32ns,
-      .type = ARM_CP_CONST, .resetvalue = 0 },
-    { .name = "VTTBR", .state = ARM_CP_STATE_AA32,
-      .cp = 15, .opc1 = 6, .crm = 2,
-      .access = PL2_RW, .accessfn = access_el3_aa32ns,
-      .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 },
-    { .name = "VTTBR_EL2", .state = ARM_CP_STATE_AA64,
-      .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 1, .opc2 = 0,
-      .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
-    { .name = "SCTLR_EL2", .state = ARM_CP_STATE_BOTH,
-      .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 0, .opc2 = 0,
-      .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
-    { .name = "TPIDR_EL2", .state = ARM_CP_STATE_BOTH,
-      .opc0 = 3, .opc1 = 4, .crn = 13, .crm = 0, .opc2 = 2,
-      .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
-    { .name = "TTBR0_EL2", .state = ARM_CP_STATE_AA64,
-      .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 0, .opc2 = 0,
-      .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
-    { .name = "HTTBR", .cp = 15, .opc1 = 4, .crm = 2,
-      .access = PL2_RW, .type = ARM_CP_64BIT | ARM_CP_CONST,
-      .resetvalue = 0 },
-    { .name = "CNTHCTL_EL2", .state = ARM_CP_STATE_BOTH,
-      .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 1, .opc2 = 0,
-      .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
-    { .name = "CNTVOFF_EL2", .state = ARM_CP_STATE_AA64,
-      .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 0, .opc2 = 3,
-      .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
-    { .name = "CNTVOFF", .cp = 15, .opc1 = 4, .crm = 14,
-      .access = PL2_RW, .type = ARM_CP_64BIT | ARM_CP_CONST,
-      .resetvalue = 0 },
-    { .name = "CNTHP_CVAL_EL2", .state = ARM_CP_STATE_AA64,
-      .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 2, .opc2 = 2,
-      .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
-    { .name = "CNTHP_CVAL", .cp = 15, .opc1 = 6, .crm = 14,
-      .access = PL2_RW, .type = ARM_CP_64BIT | ARM_CP_CONST,
-      .resetvalue = 0 },
-    { .name = "CNTHP_TVAL_EL2", .state = ARM_CP_STATE_BOTH,
-      .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 2, .opc2 = 0,
-      .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
-    { .name = "CNTHP_CTL_EL2", .state = ARM_CP_STATE_BOTH,
-      .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 2, .opc2 = 1,
-      .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
-    { .name = "MDCR_EL2", .state = ARM_CP_STATE_BOTH,
-      .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 1,
-      .access = PL2_RW, .accessfn = access_tda,
-      .type = ARM_CP_CONST, .resetvalue = 0 },
-    { .name = "HPFAR_EL2", .state = ARM_CP_STATE_BOTH,
-      .opc0 = 3, .opc1 = 4, .crn = 6, .crm = 0, .opc2 = 4,
-      .access = PL2_RW, .accessfn = access_el3_aa32ns,
-      .type = ARM_CP_CONST, .resetvalue = 0 },
-    { .name = "HSTR_EL2", .state = ARM_CP_STATE_BOTH,
-      .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 3,
-      .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
-    { .name = "FAR_EL2", .state = ARM_CP_STATE_BOTH,
-      .opc0 = 3, .opc1 = 4, .crn = 6, .crm = 0, .opc2 = 0,
-      .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
-    { .name = "HIFAR", .state = ARM_CP_STATE_AA32,
-      .type = ARM_CP_CONST,
-      .cp = 15, .opc1 = 4, .crn = 6, .crm = 0, .opc2 = 2,
-      .access = PL2_RW, .resetvalue = 0 },
-};
-
-/* Ditto, but for registers which exist in ARMv8 but not v7 */
-static const ARMCPRegInfo el3_no_el2_v8_cp_reginfo[] = {
-    { .name = "HCR2", .state = ARM_CP_STATE_AA32,
-      .cp = 15, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 4,
-      .access = PL2_RW,
-      .type = ARM_CP_CONST, .resetvalue = 0 },
-};
-
 static void do_hcr_write(CPUARMState *env, uint64_t value, uint64_t valid_mask)
 {
     ARMCPU *cpu = env_archcpu(env);
@@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu)
         define_arm_cp_regs(cpu, v8_idregs);
         define_arm_cp_regs(cpu, v8_cp_reginfo);
     }
-    if (arm_feature(env, ARM_FEATURE_EL2)) {
+
+    /*
+     * Register the base EL2 cpregs.
+     * Pre v8, these registers are implemented only as part of the
+     * Virtualization Extensions (EL2 present).  Beginning with v8,
+     * if EL2 is missing but EL3 is enabled, mostly these become
+     * RES0 from EL3, with some specific exceptions.
+     */
+    if (arm_feature(env, ARM_FEATURE_EL2)
+        || (arm_feature(env, ARM_FEATURE_EL3)
+            && arm_feature(env, ARM_FEATURE_V8))) {
         uint64_t vmpidr_def = mpidr_read_val(env);
         ARMCPRegInfo vpidr_regs[] = {
             { .name = "VPIDR", .state = ARM_CP_STATE_AA32,
@@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu)
             };
             define_one_arm_cp_reg(cpu, &rvbar);
         }
-    } else {
-        /* If EL2 is missing but higher ELs are enabled, we need to
-         * register the no_el2 reginfos.
-         */
-        if (arm_feature(env, ARM_FEATURE_EL3)) {
-            /* When EL3 exists but not EL2, VPIDR and VMPIDR take the value
-             * of MIDR_EL1 and MPIDR_EL1.
-             */
-            ARMCPRegInfo vpidr_regs[] = {
-                { .name = "VPIDR_EL2", .state = ARM_CP_STATE_BOTH,
-                  .opc0 = 3, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 0,
-                  .access = PL2_RW, .accessfn = access_el3_aa32ns,
-                  .type = ARM_CP_CONST, .resetvalue = cpu->midr,
-                  .fieldoffset = offsetof(CPUARMState, cp15.vpidr_el2) },
-                { .name = "VMPIDR_EL2", .state = ARM_CP_STATE_BOTH,
-                  .opc0 = 3, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 5,
-                  .access = PL2_RW, .accessfn = access_el3_aa32ns,
-                  .type = ARM_CP_NO_RAW,
-                  .writefn = arm_cp_write_ignore, .readfn = mpidr_read },
-            };
-            define_arm_cp_regs(cpu, vpidr_regs);
-            define_arm_cp_regs(cpu, el3_no_el2_cp_reginfo);
-            if (arm_feature(env, ARM_FEATURE_V8)) {
-                define_arm_cp_regs(cpu, el3_no_el2_v8_cp_reginfo);
-            }
-        }
     }
+
+    /* Register the base EL3 cpregs. */
     if (arm_feature(env, ARM_FEATURE_EL3)) {
         define_arm_cp_regs(cpu, el3_cp_reginfo);
         ARMCPRegInfo el3_regs[] = {
-- 
2.25.1

From: Richard Henderson <richard.henderson@linaro.org>

Drop zcr_no_el2_reginfo and merge the 3 registers into one array,
now that ZCR_EL2 can be squashed to RES0 and ZCR_EL3 dropped
while registering.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/helper.c | 55 ++++++++++++++-------------------------------
 1 file changed, 17 insertions(+), 38 deletions(-)

diff --git a/target/arm/helper.c b/target/arm/helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -XXX,XX +XXX,XX @@ static void zcr_write(CPUARMState *env, const ARMCPRegInfo *ri,
     }
 }
 
-static const ARMCPRegInfo zcr_el1_reginfo = {
-    .name = "ZCR_EL1", .state = ARM_CP_STATE_AA64,
-    .opc0 = 3, .opc1 = 0, .crn = 1, .crm = 2, .opc2 = 0,
-    .access = PL1_RW, .type = ARM_CP_SVE,
-    .fieldoffset = offsetof(CPUARMState, vfp.zcr_el[1]),
-    .writefn = zcr_write, .raw_writefn = raw_write
-};
-
-static const ARMCPRegInfo zcr_el2_reginfo = {
-    .name = "ZCR_EL2", .state = ARM_CP_STATE_AA64,
-    .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 2, .opc2 = 0,
-    .access = PL2_RW, .type = ARM_CP_SVE,
-    .fieldoffset = offsetof(CPUARMState, vfp.zcr_el[2]),
-    .writefn = zcr_write, .raw_writefn = raw_write
-};
-
-static const ARMCPRegInfo zcr_no_el2_reginfo = {
-    .name = "ZCR_EL2", .state = ARM_CP_STATE_AA64,
-    .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 2, .opc2 = 0,
-    .access = PL2_RW, .type = ARM_CP_SVE,
-    .readfn = arm_cp_read_zero, .writefn = arm_cp_write_ignore
-};
-
-static const ARMCPRegInfo zcr_el3_reginfo = {
-    .name = "ZCR_EL3", .state = ARM_CP_STATE_AA64,
-    .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 2, .opc2 = 0,
-    .access = PL3_RW, .type = ARM_CP_SVE,
-    .fieldoffset = offsetof(CPUARMState, vfp.zcr_el[3]),
-    .writefn = zcr_write, .raw_writefn = raw_write
+static const ARMCPRegInfo zcr_reginfo[] = {
+    { .name = "ZCR_EL1", .state = ARM_CP_STATE_AA64,
+      .opc0 = 3, .opc1 = 0, .crn = 1, .crm = 2, .opc2 = 0,
+      .access = PL1_RW, .type = ARM_CP_SVE,
+      .fieldoffset = offsetof(CPUARMState, vfp.zcr_el[1]),
+      .writefn = zcr_write, .raw_writefn = raw_write },
+    { .name = "ZCR_EL2", .state = ARM_CP_STATE_AA64,
+      .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 2, .opc2 = 0,
+      .access = PL2_RW, .type = ARM_CP_SVE,
+      .fieldoffset = offsetof(CPUARMState, vfp.zcr_el[2]),
+      .writefn = zcr_write, .raw_writefn = raw_write },
+    { .name = "ZCR_EL3", .state = ARM_CP_STATE_AA64,
+      .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 2, .opc2 = 0,
+      .access = PL3_RW, .type = ARM_CP_SVE,
+      .fieldoffset = offsetof(CPUARMState, vfp.zcr_el[3]),
+      .writefn = zcr_write, .raw_writefn = raw_write },
 };
 
 void hw_watchpoint_update(ARMCPU *cpu, int n)
@@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu)
     }
 
     if (cpu_isar_feature(aa64_sve, cpu)) {
-        define_one_arm_cp_reg(cpu, &zcr_el1_reginfo);
-        if (arm_feature(env, ARM_FEATURE_EL2)) {
-            define_one_arm_cp_reg(cpu, &zcr_el2_reginfo);
-        } else {
-            define_one_arm_cp_reg(cpu, &zcr_no_el2_reginfo);
-        }
-        if (arm_feature(env, ARM_FEATURE_EL3)) {
-            define_one_arm_cp_reg(cpu, &zcr_el3_reginfo);
-        }
+        define_arm_cp_regs(cpu, zcr_reginfo);
     }
 
 #ifdef TARGET_AARCH64
-- 
2.25.1

From: Richard Henderson <richard.henderson@linaro.org>

This register is present for either VHE or Debugv8p2.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/helper.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/target/arm/helper.c b/target/arm/helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo jazelle_regs[] = {
       .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
 };
 
+static const ARMCPRegInfo contextidr_el2 = {
+    .name = "CONTEXTIDR_EL2", .state = ARM_CP_STATE_AA64,
+    .opc0 = 3, .opc1 = 4, .crn = 13, .crm = 0, .opc2 = 1,
+    .access = PL2_RW,
+    .fieldoffset = offsetof(CPUARMState, cp15.contextidr_el[2])
+};
+
 static const ARMCPRegInfo vhe_reginfo[] = {
-    { .name = "CONTEXTIDR_EL2", .state = ARM_CP_STATE_AA64,
-      .opc0 = 3, .opc1 = 4, .crn = 13, .crm = 0, .opc2 = 1,
-      .access = PL2_RW,
-      .fieldoffset = offsetof(CPUARMState, cp15.contextidr_el[2]) },
     { .name = "TTBR1_EL2", .state = ARM_CP_STATE_AA64,
       .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 0, .opc2 = 1,
       .access = PL2_RW, .writefn = vmsa_tcr_ttbr_el2_write,
@@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu)
         define_one_arm_cp_reg(cpu, &ssbs_reginfo);
     }
 
+    if (cpu_isar_feature(aa64_vh, cpu) ||
+        cpu_isar_feature(aa64_debugv8p2, cpu)) {
+        define_one_arm_cp_reg(cpu, &contextidr_el2);
+    }
     if (arm_feature(env, ARM_FEATURE_EL2) && cpu_isar_feature(aa64_vh, cpu)) {
         define_arm_cp_regs(cpu, vhe_reginfo);
     }
-- 
2.25.1

From: Richard Henderson <richard.henderson@linaro.org>

Previously we were defining some of these in user-only mode,
but none of them are accessible from user-only, therefore
define them only in system mode.

This will shortly be used from cpu_tcg.c also.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/internals.h |  6 ++++
 target/arm/cpu64.c     | 64 +++---------------------------------------
 target/arm/cpu_tcg.c   | 59 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 69 insertions(+), 60 deletions(-)

diff --git a/target/arm/internals.h b/target/arm/internals.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/internals.h
+++ b/target/arm/internals.h
@@ -XXX,XX +XXX,XX @@ int aarch64_fpu_gdb_get_reg(CPUARMState *env, GByteArray *buf, int reg);
 int aarch64_fpu_gdb_set_reg(CPUARMState *env, uint8_t *buf, int reg);
 #endif
 
+#ifdef CONFIG_USER_ONLY
+static inline void define_cortex_a72_a57_a53_cp_reginfo(ARMCPU *cpu) { }
+#else
+void define_cortex_a72_a57_a53_cp_reginfo(ARMCPU *cpu);
+#endif
+
 #endif
diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu64.c
+++ b/target/arm/cpu64.c
@@ -XXX,XX +XXX,XX @@
 #include "hvf_arm.h"
 #include "qapi/visitor.h"
 #include "hw/qdev-properties.h"
-#include "cpregs.h"
+#include "internals.h"
 
 
-#ifndef CONFIG_USER_ONLY
-static uint64_t a57_a53_l2ctlr_read(CPUARMState *env, const ARMCPRegInfo *ri)
-{
-    ARMCPU *cpu = env_archcpu(env);
-
-    /* Number of cores is in [25:24]; otherwise we RAZ */
-    return (cpu->core_count - 1) << 24;
-}
-#endif
-
-static const ARMCPRegInfo cortex_a72_a57_a53_cp_reginfo[] = {
-#ifndef CONFIG_USER_ONLY
-    { .name = "L2CTLR_EL1", .state = ARM_CP_STATE_AA64,
-      .opc0 = 3, .opc1 = 1, .crn = 11, .crm = 0, .opc2 = 2,
-      .access = PL1_RW, .readfn = a57_a53_l2ctlr_read,
-      .writefn = arm_cp_write_ignore },
-    { .name = "L2CTLR",
-      .cp = 15, .opc1 = 1, .crn = 9, .crm = 0, .opc2 = 2,
-      .access = PL1_RW, .readfn = a57_a53_l2ctlr_read,
-      .writefn = arm_cp_write_ignore },
-#endif
-    { .name = "L2ECTLR_EL1", .state = ARM_CP_STATE_AA64,
-      .opc0 = 3, .opc1 = 1, .crn = 11, .crm = 0, .opc2 = 3,
-      .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
-    { .name = "L2ECTLR",
-      .cp = 15, .opc1 = 1, .crn = 9, .crm = 0, .opc2 = 3,
-      .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
-    { .name = "L2ACTLR", .state = ARM_CP_STATE_BOTH,
-      .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 0, .opc2 = 0,
-      .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
-    { .name = "CPUACTLR_EL1", .state = ARM_CP_STATE_AA64,
-      .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 2, .opc2 = 0,
-      .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
-    { .name = "CPUACTLR",
-      .cp = 15, .opc1 = 0, .crm = 15,
-      .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 },
-    { .name = "CPUECTLR_EL1", .state = ARM_CP_STATE_AA64,
-      .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 2, .opc2 = 1,
-      .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
-    { .name = "CPUECTLR",
-      .cp = 15, .opc1 = 1, .crm = 15,
-      .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 },
-    { .name = "CPUMERRSR_EL1", .state = ARM_CP_STATE_AA64,
-      .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 2, .opc2 = 2,
-      .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
-    { .name = "CPUMERRSR",
-      .cp = 15, .opc1 = 2, .crm = 15,
-      .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 },
-    { .name = "L2MERRSR_EL1", .state = ARM_CP_STATE_AA64,
-      .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 2, .opc2 = 3,
-      .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
-    { .name = "L2MERRSR",
-      .cp = 15, .opc1 = 3, .crm = 15,
-      .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 },
-};
-
 static void aarch64_a57_initfn(Object *obj)
 {
     ARMCPU *cpu = ARM_CPU(obj);
@@ -XXX,XX +XXX,XX @@ static void aarch64_a57_initfn(Object *obj)
     cpu->gic_num_lrs = 4;
     cpu->gic_vpribits = 5;
     cpu->gic_vprebits = 5;
-    define_arm_cp_regs(cpu, cortex_a72_a57_a53_cp_reginfo);
+    define_cortex_a72_a57_a53_cp_reginfo(cpu);
 }
 
 static void aarch64_a53_initfn(Object *obj)
@@ -XXX,XX +XXX,XX @@ static void aarch64_a53_initfn(Object *obj)
     cpu->gic_num_lrs = 4;
     cpu->gic_vpribits = 5;
     cpu->gic_vprebits = 5;
-    define_arm_cp_regs(cpu, cortex_a72_a57_a53_cp_reginfo);
+    define_cortex_a72_a57_a53_cp_reginfo(cpu);
 }
 
 static void aarch64_a72_initfn(Object *obj)
@@ -XXX,XX +XXX,XX @@ static void aarch64_a72_initfn(Object *obj)
     cpu->gic_num_lrs = 4;
     cpu->gic_vpribits = 5;
     cpu->gic_vprebits = 5;
-    define_arm_cp_regs(cpu, cortex_a72_a57_a53_cp_reginfo);
+    define_cortex_a72_a57_a53_cp_reginfo(cpu);
 }
 
 void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp)
diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu_tcg.c
+++ b/target/arm/cpu_tcg.c
@@ -XXX,XX +XXX,XX @@
 #endif
 #include "cpregs.h"
 
+#ifndef CONFIG_USER_ONLY
+static uint64_t l2ctlr_read(CPUARMState *env, const ARMCPRegInfo *ri)
+{
+    ARMCPU *cpu = env_archcpu(env);
+
+    /* Number of cores is in [25:24]; otherwise we RAZ */
+    return (cpu->core_count - 1) << 24;
+}
+
+static const ARMCPRegInfo cortex_a72_a57_a53_cp_reginfo[] = {
+    { .name = "L2CTLR_EL1", .state = ARM_CP_STATE_AA64,
+      .opc0 = 3, .opc1 = 1, .crn = 11, .crm = 0, .opc2 = 2,
+      .access = PL1_RW, .readfn = l2ctlr_read,
+      .writefn = arm_cp_write_ignore },
+    { .name = "L2CTLR",
+      .cp = 15, .opc1 = 1, .crn = 9, .crm = 0, .opc2 = 2,
+      .access = PL1_RW, .readfn = l2ctlr_read,
+      .writefn = arm_cp_write_ignore },
+    { .name = "L2ECTLR_EL1", .state = ARM_CP_STATE_AA64,
+      .opc0 = 3, .opc1 = 1, .crn = 11, .crm = 0, .opc2 = 3,
+      .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
+    { .name = "L2ECTLR",
+      .cp = 15, .opc1 = 1, .crn = 9, .crm = 0, .opc2 = 3,
+      .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
+    { .name = "L2ACTLR", .state = ARM_CP_STATE_BOTH,
+      .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 0, .opc2 = 0,
+      .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
+    { .name = "CPUACTLR_EL1", .state = ARM_CP_STATE_AA64,
+      .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 2, .opc2 = 0,
+      .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
+    { .name = "CPUACTLR",
+      .cp = 15, .opc1 = 0, .crm = 15,
+      .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 },
+    { .name = "CPUECTLR_EL1", .state = ARM_CP_STATE_AA64,
+      .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 2, .opc2 = 1,
+      .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
+    { .name = "CPUECTLR",
+      .cp = 15, .opc1 = 1, .crm = 15,
+      .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 },
+    { .name = "CPUMERRSR_EL1", .state = ARM_CP_STATE_AA64,
+      .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 2, .opc2 = 2,
+      .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
+    { .name = "CPUMERRSR",
+      .cp = 15, .opc1 = 2, .crm = 15,
+      .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 },
+    { .name = "L2MERRSR_EL1", .state = ARM_CP_STATE_AA64,
+      .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 2, .opc2 = 3,
+      .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
+    { .name = "L2MERRSR",
+      .cp = 15, .opc1 = 3, .crm = 15,
+      .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 },
+};
+
+void define_cortex_a72_a57_a53_cp_reginfo(ARMCPU *cpu)
+{
+    define_arm_cp_regs(cpu, cortex_a72_a57_a53_cp_reginfo);
+}
+#endif /* !CONFIG_USER_ONLY */
+
 /* CPU models. These are not needed for the AArch64 linux-user build. */
 #if !defined(CONFIG_USER_ONLY) || !defined(TARGET_AARCH64)
 
-- 
2.25.1

From: Richard Henderson <richard.henderson@linaro.org>

Instead of starting with cortex-a15 and adding v8 features to
a v7 cpu, begin with a v8 cpu stripped of its aarch64 features.
This fixes the long-standing to-do where we only enabled v8
features for user-only.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu_tcg.c | 151 ++++++++++++++++++++++++++-----------------
 1 file changed, 92 insertions(+), 59 deletions(-)

diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu_tcg.c
+++ b/target/arm/cpu_tcg.c
@@ -XXX,XX +XXX,XX @@ static void arm_v7m_class_init(ObjectClass *oc, void *data)
 static void arm_max_initfn(Object *obj)
 {
     ARMCPU *cpu = ARM_CPU(obj);
+    uint32_t t;
 
-    cortex_a15_initfn(obj);
+    /* aarch64_a57_initfn, advertising none of the aarch64 features */
+    cpu->dtb_compatible = "arm,cortex-a57";
+    set_feature(&cpu->env, ARM_FEATURE_V8);
+    set_feature(&cpu->env, ARM_FEATURE_NEON);
+    set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER);
+    set_feature(&cpu->env, ARM_FEATURE_CBAR_RO);
+    set_feature(&cpu->env, ARM_FEATURE_EL2);
+    set_feature(&cpu->env, ARM_FEATURE_EL3);
+    set_feature(&cpu->env, ARM_FEATURE_PMU);
+    cpu->midr = 0x411fd070;
+    cpu->revidr = 0x00000000;
+    cpu->reset_fpsid = 0x41034070;
+    cpu->isar.mvfr0 = 0x10110222;
+    cpu->isar.mvfr1 = 0x12111111;
+    cpu->isar.mvfr2 = 0x00000043;
+    cpu->ctr = 0x8444c004;
+    cpu->reset_sctlr = 0x00c50838;
+    cpu->isar.id_pfr0 = 0x00000131;
+    cpu->isar.id_pfr1 = 0x00011011;
+    cpu->isar.id_dfr0 = 0x03010066;
+    cpu->id_afr0 = 0x00000000;
+    cpu->isar.id_mmfr0 = 0x10101105;
+    cpu->isar.id_mmfr1 = 0x40000000;
+    cpu->isar.id_mmfr2 = 0x01260000;
+    cpu->isar.id_mmfr3 = 0x02102211;
+    cpu->isar.id_isar0 = 0x02101110;
+    cpu->isar.id_isar1 = 0x13112111;
+    cpu->isar.id_isar2 = 0x21232042;
+    cpu->isar.id_isar3 = 0x01112131;
+    cpu->isar.id_isar4 = 0x00011142;
+    cpu->isar.id_isar5 = 0x00011121;
+    cpu->isar.id_isar6 = 0;
+    cpu->isar.dbgdidr = 0x3516d000;
+    cpu->clidr = 0x0a200023;
+    cpu->ccsidr[0] = 0x701fe00a; /* 32KB L1 dcache */
+    cpu->ccsidr[1] = 0x201fe012; /* 48KB L1 icache */
+    cpu->ccsidr[2] = 0x70ffe07a; /* 2048KB L2 cache */
+    define_cortex_a72_a57_a53_cp_reginfo(cpu);
 
-    /* old-style VFP short-vector support */
-    cpu->isar.mvfr0 = FIELD_DP32(cpu->isar.mvfr0, MVFR0, FPSHVEC, 1);
+    /* Add additional features supported by QEMU */
+    t = cpu->isar.id_isar5;
+    t = FIELD_DP32(t, ID_ISAR5, AES, 2);
+    t = FIELD_DP32(t, ID_ISAR5, SHA1, 1);
+    t = FIELD_DP32(t, ID_ISAR5, SHA2, 1);
+    t = FIELD_DP32(t, ID_ISAR5, CRC32, 1);
+    t = FIELD_DP32(t, ID_ISAR5, RDM, 1);
+    t = FIELD_DP32(t, ID_ISAR5, VCMA, 1);
+    cpu->isar.id_isar5 = t;
+
+    t = cpu->isar.id_isar6;
+    t = FIELD_DP32(t, ID_ISAR6, JSCVT, 1);
+    t = FIELD_DP32(t, ID_ISAR6, DP, 1);
+    t = FIELD_DP32(t, ID_ISAR6, FHM, 1);
+    t = FIELD_DP32(t, ID_ISAR6, SB, 1);
+    t = FIELD_DP32(t, ID_ISAR6, SPECRES, 1);
+    t = FIELD_DP32(t, ID_ISAR6, BF16, 1);
+    t = FIELD_DP32(t, ID_ISAR6, I8MM, 1);
+    cpu->isar.id_isar6 = t;
+
+    t = cpu->isar.mvfr1;
+    t = FIELD_DP32(t, MVFR1, FPHP, 3);     /* v8.2-FP16 */
+    t = FIELD_DP32(t, MVFR1, SIMDHP, 2);   /* v8.2-FP16 */
+    cpu->isar.mvfr1 = t;
+
+    t = cpu->isar.mvfr2;
+    t = FIELD_DP32(t, MVFR2, SIMDMISC, 3); /* SIMD MaxNum */
+    t = FIELD_DP32(t, MVFR2, FPMISC, 4);   /* FP MaxNum */
+    cpu->isar.mvfr2 = t;
+
+    t = cpu->isar.id_mmfr3;
+    t = FIELD_DP32(t, ID_MMFR3, PAN, 2); /* ATS1E1 */
+    cpu->isar.id_mmfr3 = t;
+
+    t = cpu->isar.id_mmfr4;
+    t = FIELD_DP32(t, ID_MMFR4, HPDS, 1); /* AA32HPD */
+    t = FIELD_DP32(t, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */
+    t = FIELD_DP32(t, ID_MMFR4, CNP, 1); /* TTCNP */
+    t = FIELD_DP32(t, ID_MMFR4, XNX, 1); /* TTS2UXN */
+    cpu->isar.id_mmfr4 = t;
+
+    t = cpu->isar.id_pfr0;
+    t = FIELD_DP32(t, ID_PFR0, DIT, 1);
+    cpu->isar.id_pfr0 = t;
+
+    t = cpu->isar.id_pfr2;
+    t = FIELD_DP32(t, ID_PFR2, SSBS, 1);
+    cpu->isar.id_pfr2 = t;
 
 #ifdef CONFIG_USER_ONLY
     /*
-     * We don't set these in system emulation mode for the moment,
-     * since we don't correctly set (all of) the ID registers to
-     * advertise them.
+     * Break with true ARMv8 and add back old-style VFP short-vector support.
+     * Only do this for user-mode, where -cpu max is the default, so that
+     * older v6 and v7 programs are more likely to work without adjustment.
      */
-    set_feature(&cpu->env, ARM_FEATURE_V8);
-    {
-        uint32_t t;
-
-        t = cpu->isar.id_isar5;
-        t = FIELD_DP32(t, ID_ISAR5, AES, 2);
-        t = FIELD_DP32(t, ID_ISAR5, SHA1, 1);
-        t = FIELD_DP32(t, ID_ISAR5, SHA2, 1);
-        t = FIELD_DP32(t, ID_ISAR5, CRC32, 1);
-        t = FIELD_DP32(t, ID_ISAR5, RDM, 1);
-        t = FIELD_DP32(t, ID_ISAR5, VCMA, 1);
-        cpu->isar.id_isar5 = t;
-
-        t = cpu->isar.id_isar6;
-        t = FIELD_DP32(t, ID_ISAR6, JSCVT, 1);
-        t = FIELD_DP32(t, ID_ISAR6, DP, 1);
-        t = FIELD_DP32(t, ID_ISAR6, FHM, 1);
-        t = FIELD_DP32(t, ID_ISAR6, SB, 1);
-        t = FIELD_DP32(t, ID_ISAR6, SPECRES, 1);
-        t = FIELD_DP32(t, ID_ISAR6, BF16, 1);
-        t = FIELD_DP32(t, ID_ISAR6, I8MM, 1);
-        cpu->isar.id_isar6 = t;
-
-        t = cpu->isar.mvfr1;
-        t = FIELD_DP32(t, MVFR1, FPHP, 3);     /* v8.2-FP16 */
-        t = FIELD_DP32(t, MVFR1, SIMDHP, 2);   /* v8.2-FP16 */
-        cpu->isar.mvfr1 = t;
-
-        t = cpu->isar.mvfr2;
-        t = FIELD_DP32(t, MVFR2, SIMDMISC, 3); /* SIMD MaxNum */
-        t = FIELD_DP32(t, MVFR2, FPMISC, 4);   /* FP MaxNum */
-        cpu->isar.mvfr2 = t;
-
-        t = cpu->isar.id_mmfr3;
-        t = FIELD_DP32(t, ID_MMFR3, PAN, 2); /* ATS1E1 */
-        cpu->isar.id_mmfr3 = t;
-
-        t = cpu->isar.id_mmfr4;
-        t = FIELD_DP32(t, ID_MMFR4, HPDS, 1); /* AA32HPD */
-        t = FIELD_DP32(t, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */
-        t = FIELD_DP32(t, ID_MMFR4, CNP, 1); /* TTCNP */
-        t = FIELD_DP32(t, ID_MMFR4, XNX, 1); /* TTS2UXN */
-        cpu->isar.id_mmfr4 = t;
-
-        t = cpu->isar.id_pfr0;
-        t = FIELD_DP32(t, ID_PFR0, DIT, 1);
-        cpu->isar.id_pfr0 = t;
-
-        t = cpu->isar.id_pfr2;
-        t = FIELD_DP32(t, ID_PFR2, SSBS, 1);
-        cpu->isar.id_pfr2 = t;
-    }
-#endif /* CONFIG_USER_ONLY */
+    cpu->isar.mvfr0 = FIELD_DP32(cpu->isar.mvfr0, MVFR0, FPSHVEC, 1);
+#endif
 }
 #endif /* !TARGET_AARCH64 */
 
-- 
2.25.1

From: Richard Henderson <richard.henderson@linaro.org>

We set this for qemu-system-aarch64, but failed to do so
for the strictly 32-bit emulation.

Fixes: 3bec78447a9 ("target/arm: Provide ARMv8.4-PMU in '-cpu max'")
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu_tcg.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu_tcg.c
+++ b/target/arm/cpu_tcg.c
@@ -XXX,XX +XXX,XX @@ static void arm_max_initfn(Object *obj)
     t = FIELD_DP32(t, ID_PFR2, SSBS, 1);
     cpu->isar.id_pfr2 = t;
 
+    t = cpu->isar.id_dfr0;
+    t = FIELD_DP32(t, ID_DFR0, PERFMON, 5); /* v8.4-PMU */
+    cpu->isar.id_dfr0 = t;
+
 #ifdef CONFIG_USER_ONLY
     /*
      * Break with true ARMv8 and add back old-style VFP short-vector support.
-- 
2.25.1

From: Richard Henderson <richard.henderson@linaro.org>

Share the code to set AArch32 max features so that we no
longer have code drift between qemu{-system,}-{arm,aarch64}.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/internals.h |   2 +
 target/arm/cpu64.c     |  50 +-----------------
 target/arm/cpu_tcg.c   | 114 ++++++++++++++++++++++-------------------
 3 files changed, 65 insertions(+), 101 deletions(-)

diff --git a/target/arm/internals.h b/target/arm/internals.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/internals.h
+++ b/target/arm/internals.h
@@ -XXX,XX +XXX,XX @@ static inline void define_cortex_a72_a57_a53_cp_reginfo(ARMCPU *cpu) { }
 void define_cortex_a72_a57_a53_cp_reginfo(ARMCPU *cpu);
 #endif
 
+void aa32_max_features(ARMCPU *cpu);
+
 #endif
diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu64.c
+++ b/target/arm/cpu64.c
@@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj)
 {
     ARMCPU *cpu = ARM_CPU(obj);
     uint64_t t;
-    uint32_t u;
 
     if (kvm_enabled() || hvf_enabled()) {
         /* With KVM or HVF, '-cpu max' is identical to '-cpu host' */
@@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj)
     t = FIELD_DP64(t, ID_AA64ZFR0, F64MM, 1);
     cpu->isar.id_aa64zfr0 = t;
 
-    /* Replicate the same data to the 32-bit id registers.  */
-    u = cpu->isar.id_isar5;
-    u = FIELD_DP32(u, ID_ISAR5, AES, 2); /* AES + PMULL */
-    u = FIELD_DP32(u, ID_ISAR5, SHA1, 1);
-    u = FIELD_DP32(u, ID_ISAR5, SHA2, 1);
-    u = FIELD_DP32(u, ID_ISAR5, CRC32, 1);
-    u = FIELD_DP32(u, ID_ISAR5, RDM, 1);
-    u = FIELD_DP32(u, ID_ISAR5, VCMA, 1);
-    cpu->isar.id_isar5 = u;
-
-    u = cpu->isar.id_isar6;
-    u = FIELD_DP32(u, ID_ISAR6, JSCVT, 1);
-    u = FIELD_DP32(u, ID_ISAR6, DP, 1);
-    u = FIELD_DP32(u, ID_ISAR6, FHM, 1);
-    u = FIELD_DP32(u, ID_ISAR6, SB, 1);
-    u = FIELD_DP32(u, ID_ISAR6, SPECRES, 1);
-    u = FIELD_DP32(u, ID_ISAR6, BF16, 1);
-    u = FIELD_DP32(u, ID_ISAR6, I8MM, 1);
-    cpu->isar.id_isar6 = u;
-
-    u = cpu->isar.id_pfr0;
-    u = FIELD_DP32(u, ID_PFR0, DIT, 1);
-    cpu->isar.id_pfr0 = u;
-
-    u = cpu->isar.id_pfr2;
-    u = FIELD_DP32(u, ID_PFR2, SSBS, 1);
-    cpu->isar.id_pfr2 = u;
-
-    u = cpu->isar.id_mmfr3;
-    u = FIELD_DP32(u, ID_MMFR3, PAN, 2); /* ATS1E1 */
-    cpu->isar.id_mmfr3 = u;
-
-    u = cpu->isar.id_mmfr4;
-    u = FIELD_DP32(u, ID_MMFR4, HPDS, 1); /* AA32HPD */
-    u = FIELD_DP32(u, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */
-    u = FIELD_DP32(u, ID_MMFR4, CNP, 1); /* TTCNP */
-    u = FIELD_DP32(u, ID_MMFR4, XNX, 1); /* TTS2UXN */
-    cpu->isar.id_mmfr4 = u;
-
     t = cpu->isar.id_aa64dfr0;
     t = FIELD_DP64(t, ID_AA64DFR0, PMUVER, 5); /* v8.4-PMU */
     cpu->isar.id_aa64dfr0 = t;
 
-    u = cpu->isar.id_dfr0;
-    u = FIELD_DP32(u, ID_DFR0, PERFMON, 5); /* v8.4-PMU */
-    cpu->isar.id_dfr0 = u;
-
-    u = cpu->isar.mvfr1;
-    u = FIELD_DP32(u, MVFR1, FPHP, 3);      /* v8.2-FP16 */
-    u = FIELD_DP32(u, MVFR1, SIMDHP, 2);    /* v8.2-FP16 */
-    cpu->isar.mvfr1 = u;
+    /* Replicate the same data to the 32-bit id registers.  */
+    aa32_max_features(cpu);
 
 #ifdef CONFIG_USER_ONLY
     /*
diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu_tcg.c
+++ b/target/arm/cpu_tcg.c
@@ -XXX,XX +XXX,XX @@
 #endif
 #include "cpregs.h"
 
+
+/* Share AArch32 -cpu max features with AArch64. */
+void aa32_max_features(ARMCPU *cpu)
+{
+    uint32_t t;
+
+    /* Add additional features supported by QEMU */
+    t = cpu->isar.id_isar5;
+    t = FIELD_DP32(t, ID_ISAR5, AES, 2);
+    t = FIELD_DP32(t, ID_ISAR5, SHA1, 1);
+    t = FIELD_DP32(t, ID_ISAR5, SHA2, 1);
+    t = FIELD_DP32(t, ID_ISAR5, CRC32, 1);
+    t = FIELD_DP32(t, ID_ISAR5, RDM, 1);
+    t = FIELD_DP32(t, ID_ISAR5, VCMA, 1);
+    cpu->isar.id_isar5 = t;
+
+    t = cpu->isar.id_isar6;
+    t = FIELD_DP32(t, ID_ISAR6, JSCVT, 1);
+    t = FIELD_DP32(t, ID_ISAR6, DP, 1);
+    t = FIELD_DP32(t, ID_ISAR6, FHM, 1);
+    t = FIELD_DP32(t, ID_ISAR6, SB, 1);
+    t = FIELD_DP32(t, ID_ISAR6, SPECRES, 1);
+    t = FIELD_DP32(t, ID_ISAR6, BF16, 1);
+    t = FIELD_DP32(t, ID_ISAR6, I8MM, 1);
+    cpu->isar.id_isar6 = t;
+
+    t = cpu->isar.mvfr1;
+    t = FIELD_DP32(t, MVFR1, FPHP, 3);     /* v8.2-FP16 */
+    t = FIELD_DP32(t, MVFR1, SIMDHP, 2);   /* v8.2-FP16 */
+    cpu->isar.mvfr1 = t;
+
+    t = cpu->isar.mvfr2;
+    t = FIELD_DP32(t, MVFR2, SIMDMISC, 3); /* SIMD MaxNum */
+    t = FIELD_DP32(t, MVFR2, FPMISC, 4);   /* FP MaxNum */
+    cpu->isar.mvfr2 = t;
+
+    t = cpu->isar.id_mmfr3;
+    t = FIELD_DP32(t, ID_MMFR3, PAN, 2); /* ATS1E1 */
+    cpu->isar.id_mmfr3 = t;
+
+    t = cpu->isar.id_mmfr4;
+    t = FIELD_DP32(t, ID_MMFR4, HPDS, 1); /* AA32HPD */
+    t = FIELD_DP32(t, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */
+    t = FIELD_DP32(t, ID_MMFR4, CNP, 1); /* TTCNP */
+    t = FIELD_DP32(t, ID_MMFR4, XNX, 1); /* TTS2UXN */
+    cpu->isar.id_mmfr4 = t;
+
+    t = cpu->isar.id_pfr0;
+    t = FIELD_DP32(t, ID_PFR0, DIT, 1);
+    cpu->isar.id_pfr0 = t;
+
+    t = cpu->isar.id_pfr2;
+    t = FIELD_DP32(t, ID_PFR2, SSBS, 1);
+    cpu->isar.id_pfr2 = t;
+
+    t = cpu->isar.id_dfr0;
+    t = FIELD_DP32(t, ID_DFR0, PERFMON, 5); /* v8.4-PMU */
+    cpu->isar.id_dfr0 = t;
+}
+
 #ifndef CONFIG_USER_ONLY
 static uint64_t l2ctlr_read(CPUARMState *env, const ARMCPRegInfo *ri)
 {
@@ -XXX,XX +XXX,XX @@ static void arm_v7m_class_init(ObjectClass *oc, void *data)
 static void arm_max_initfn(Object *obj)
 {
     ARMCPU *cpu = ARM_CPU(obj);
-    uint32_t t;
 
     /* aarch64_a57_initfn, advertising none of the aarch64 features */
     cpu->dtb_compatible = "arm,cortex-a57";
@@ -XXX,XX +XXX,XX @@ static void arm_max_initfn(Object *obj)
     cpu->ccsidr[2] = 0x70ffe07a; /* 2048KB L2 cache */
     define_cortex_a72_a57_a53_cp_reginfo(cpu);
 
-    /* Add additional features supported by QEMU */
-    t = cpu->isar.id_isar5;
-    t = FIELD_DP32(t, ID_ISAR5, AES, 2);
-    t = FIELD_DP32(t, ID_ISAR5, SHA1, 1);
-    t = FIELD_DP32(t, ID_ISAR5, SHA2, 1);
-    t = FIELD_DP32(t, ID_ISAR5, CRC32, 1);
-    t = FIELD_DP32(t, ID_ISAR5, RDM, 1);
-    t = FIELD_DP32(t, ID_ISAR5, VCMA, 1);
-    cpu->isar.id_isar5 = t;
-
-    t = cpu->isar.id_isar6;
-    t = FIELD_DP32(t, ID_ISAR6, JSCVT, 1);
-    t = FIELD_DP32(t, ID_ISAR6, DP, 1);
-    t = FIELD_DP32(t, ID_ISAR6, FHM, 1);
-    t = FIELD_DP32(t, ID_ISAR6, SB, 1);
-    t = FIELD_DP32(t, ID_ISAR6, SPECRES, 1);
-    t = FIELD_DP32(t, ID_ISAR6, BF16, 1);
-    t = FIELD_DP32(t, ID_ISAR6, I8MM, 1);
-    cpu->isar.id_isar6 = t;
-
-    t = cpu->isar.mvfr1;
-    t = FIELD_DP32(t, MVFR1, FPHP, 3);     /* v8.2-FP16 */
-    t = FIELD_DP32(t, MVFR1, SIMDHP, 2);   /* v8.2-FP16 */
-    cpu->isar.mvfr1 = t;
-
-    t = cpu->isar.mvfr2;
-    t = FIELD_DP32(t, MVFR2, SIMDMISC, 3); /* SIMD MaxNum */
-    t = FIELD_DP32(t, MVFR2, FPMISC, 4);   /* FP MaxNum */
-    cpu->isar.mvfr2 = t;
-
-    t = cpu->isar.id_mmfr3;
-    t = FIELD_DP32(t, ID_MMFR3, PAN, 2); /* ATS1E1 */
-    cpu->isar.id_mmfr3 = t;
-
-    t = cpu->isar.id_mmfr4;
-    t = FIELD_DP32(t, ID_MMFR4, HPDS, 1); /* AA32HPD */
-    t = FIELD_DP32(t, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */
-    t = FIELD_DP32(t, ID_MMFR4, CNP, 1); /* TTCNP */
-    t = FIELD_DP32(t, ID_MMFR4, XNX, 1); /* TTS2UXN */
-    cpu->isar.id_mmfr4 = t;
-
-    t = cpu->isar.id_pfr0;
-    t = FIELD_DP32(t, ID_PFR0, DIT, 1);
-    cpu->isar.id_pfr0 = t;
-
-    t = cpu->isar.id_pfr2;
-    t = FIELD_DP32(t, ID_PFR2, SSBS, 1);
-    cpu->isar.id_pfr2 = t;
-
-    t = cpu->isar.id_dfr0;
-    t = FIELD_DP32(t, ID_DFR0, PERFMON, 5); /* v8.4-PMU */
-    cpu->isar.id_dfr0 = t;
+    aa32_max_features(cpu);
 
 #ifdef CONFIG_USER_ONLY
     /*
-- 
2.25.1

From: Richard Henderson <richard.henderson@linaro.org>

Update the legacy feature names to the current names.
Provide feature names for id changes that were not marked.
Sort the field updates into increasing bitfield order.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu64.c   | 100 +++++++++++++++++++++----------------------
 target/arm/cpu_tcg.c |  48 ++++++++++-----------
 2 files changed, 74 insertions(+), 74 deletions(-)

diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu64.c
+++ b/target/arm/cpu64.c
@@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj)
     cpu->midr = t;
 
     t = cpu->isar.id_aa64isar0;
-    t = FIELD_DP64(t, ID_AA64ISAR0, AES, 2); /* AES + PMULL */
-    t = FIELD_DP64(t, ID_AA64ISAR0, SHA1, 1);
-    t = FIELD_DP64(t, ID_AA64ISAR0, SHA2, 2); /* SHA512 */
+    t = FIELD_DP64(t, ID_AA64ISAR0, AES, 2);      /* FEAT_PMULL */
+    t = FIELD_DP64(t, ID_AA64ISAR0, SHA1, 1);     /* FEAT_SHA1 */
+    t = FIELD_DP64(t, ID_AA64ISAR0, SHA2, 2);     /* FEAT_SHA512 */
     t = FIELD_DP64(t, ID_AA64ISAR0, CRC32, 1);
-    t = FIELD_DP64(t, ID_AA64ISAR0, ATOMIC, 2);
-    t = FIELD_DP64(t, ID_AA64ISAR0, RDM, 1);
-    t = FIELD_DP64(t, ID_AA64ISAR0, SHA3, 1);
-    t = FIELD_DP64(t, ID_AA64ISAR0, SM3, 1);
-    t = FIELD_DP64(t, ID_AA64ISAR0, SM4, 1);
-    t = FIELD_DP64(t, ID_AA64ISAR0, DP, 1);
-    t = FIELD_DP64(t, ID_AA64ISAR0, FHM, 1);
-    t = FIELD_DP64(t, ID_AA64ISAR0, TS, 2); /* v8.5-CondM */
-    t = FIELD_DP64(t, ID_AA64ISAR0, TLB, 2); /* FEAT_TLBIRANGE */
-    t = FIELD_DP64(t, ID_AA64ISAR0, RNDR, 1);
+    t = FIELD_DP64(t, ID_AA64ISAR0, ATOMIC, 2);   /* FEAT_LSE */
+    t = FIELD_DP64(t, ID_AA64ISAR0, RDM, 1);      /* FEAT_RDM */
+    t = FIELD_DP64(t, ID_AA64ISAR0, SHA3, 1);     /* FEAT_SHA3 */
+    t = FIELD_DP64(t, ID_AA64ISAR0, SM3, 1);      /* FEAT_SM3 */
+    t = FIELD_DP64(t, ID_AA64ISAR0, SM4, 1);      /* FEAT_SM4 */
+    t = FIELD_DP64(t, ID_AA64ISAR0, DP, 1);       /* FEAT_DotProd */
+    t = FIELD_DP64(t, ID_AA64ISAR0, FHM, 1);      /* FEAT_FHM */
+    t = FIELD_DP64(t, ID_AA64ISAR0, TS, 2);       /* FEAT_FlagM2 */
+    t = FIELD_DP64(t, ID_AA64ISAR0, TLB, 2);      /* FEAT_TLBIRANGE */
+    t = FIELD_DP64(t, ID_AA64ISAR0, RNDR, 1);     /* FEAT_RNG */
     cpu->isar.id_aa64isar0 = t;
 
     t = cpu->isar.id_aa64isar1;
-    t = FIELD_DP64(t, ID_AA64ISAR1, DPB, 2);
-    t = FIELD_DP64(t, ID_AA64ISAR1, JSCVT, 1);
-    t = FIELD_DP64(t, ID_AA64ISAR1, FCMA, 1);
-    t = FIELD_DP64(t, ID_AA64ISAR1, SB, 1);
-    t = FIELD_DP64(t, ID_AA64ISAR1, SPECRES, 1);
-    t = FIELD_DP64(t, ID_AA64ISAR1, BF16, 1);
-    t = FIELD_DP64(t, ID_AA64ISAR1, FRINTTS, 1);
-    t = FIELD_DP64(t, ID_AA64ISAR1, LRCPC, 2); /* ARMv8.4-RCPC */
-    t = FIELD_DP64(t, ID_AA64ISAR1, I8MM, 1);
+    t = FIELD_DP64(t, ID_AA64ISAR1, DPB, 2);      /* FEAT_DPB2 */
+    t = FIELD_DP64(t, ID_AA64ISAR1, JSCVT, 1);    /* FEAT_JSCVT */
+    t = FIELD_DP64(t, ID_AA64ISAR1, FCMA, 1);     /* FEAT_FCMA */
+    t = FIELD_DP64(t, ID_AA64ISAR1, LRCPC, 2);    /* FEAT_LRCPC2 */
+    t = FIELD_DP64(t, ID_AA64ISAR1, FRINTTS, 1);  /* FEAT_FRINTTS */
+    t = FIELD_DP64(t, ID_AA64ISAR1, SB, 1);       /* FEAT_SB */
+    t = FIELD_DP64(t, ID_AA64ISAR1, SPECRES, 1);  /* FEAT_SPECRES */
+    t = FIELD_DP64(t, ID_AA64ISAR1, BF16, 1);     /* FEAT_BF16 */
+    t = FIELD_DP64(t, ID_AA64ISAR1, I8MM, 1);     /* FEAT_I8MM */
     cpu->isar.id_aa64isar1 = t;
 
     t = cpu->isar.id_aa64pfr0;
+    t = FIELD_DP64(t, ID_AA64PFR0, FP, 1);        /* FEAT_FP16 */
+    t = FIELD_DP64(t, ID_AA64PFR0, ADVSIMD, 1);   /* FEAT_FP16 */
     t = FIELD_DP64(t, ID_AA64PFR0, SVE, 1);
-    t = FIELD_DP64(t, ID_AA64PFR0, FP, 1);
-    t = FIELD_DP64(t, ID_AA64PFR0, ADVSIMD, 1);
-    t = FIELD_DP64(t, ID_AA64PFR0, SEL2, 1);
-    t = FIELD_DP64(t, ID_AA64PFR0, DIT, 1);
+    t = FIELD_DP64(t, ID_AA64PFR0, SEL2, 1);      /* FEAT_SEL2 */
+    t = FIELD_DP64(t, ID_AA64PFR0, DIT, 1);       /* FEAT_DIT */
     cpu->isar.id_aa64pfr0 = t;
 
     t = cpu->isar.id_aa64pfr1;
-    t = FIELD_DP64(t, ID_AA64PFR1, BT, 1);
-    t = FIELD_DP64(t, ID_AA64PFR1, SSBS, 2);
+    t = FIELD_DP64(t, ID_AA64PFR1, BT, 1);        /* FEAT_BTI */
+    t = FIELD_DP64(t, ID_AA64PFR1, SSBS, 2);      /* FEAT_SSBS2 */
     /*
      * Begin with full support for MTE. This will be downgraded to MTE=0
      * during realize if the board provides no tag memory, much like
      * we do for EL2 with the virtualization=on property.
      */
-    t = FIELD_DP64(t, ID_AA64PFR1, MTE, 3);
+    t = FIELD_DP64(t, ID_AA64PFR1, MTE, 3);       /* FEAT_MTE3 */
     cpu->isar.id_aa64pfr1 = t;
 
     t = cpu->isar.id_aa64mmfr0;
@@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj)
     cpu->isar.id_aa64mmfr0 = t;
 
     t = cpu->isar.id_aa64mmfr1;
-    t = FIELD_DP64(t, ID_AA64MMFR1, HPDS, 1); /* HPD */
-    t = FIELD_DP64(t, ID_AA64MMFR1, LO, 1);
-    t = FIELD_DP64(t, ID_AA64MMFR1, VH, 1);
-    t = FIELD_DP64(t, ID_AA64MMFR1, PAN, 2); /* ATS1E1 */
-    t = FIELD_DP64(t, ID_AA64MMFR1, VMIDBITS, 2); /* VMID16 */
-    t = FIELD_DP64(t, ID_AA64MMFR1, XNX, 1); /* TTS2UXN */
+    t = FIELD_DP64(t, ID_AA64MMFR1, VMIDBITS, 2); /* FEAT_VMID16 */
+    t = FIELD_DP64(t, ID_AA64MMFR1, VH, 1);       /* FEAT_VHE */
+    t = FIELD_DP64(t, ID_AA64MMFR1, HPDS, 1);     /* FEAT_HPDS */
+    t = FIELD_DP64(t, ID_AA64MMFR1, LO, 1);       /* FEAT_LOR */
+    t = FIELD_DP64(t, ID_AA64MMFR1, PAN, 2);      /* FEAT_PAN2 */
+    t = FIELD_DP64(t, ID_AA64MMFR1, XNX, 1);      /* FEAT_XNX */
     cpu->isar.id_aa64mmfr1 = t;
 
     t = cpu->isar.id_aa64mmfr2;
-    t = FIELD_DP64(t, ID_AA64MMFR2, UAO, 1);
-    t = FIELD_DP64(t, ID_AA64MMFR2, CNP, 1); /* TTCNP */
-    t = FIELD_DP64(t, ID_AA64MMFR2, ST, 1); /* TTST */
-    t = FIELD_DP64(t, ID_AA64MMFR2, VARANGE, 1); /* FEAT_LVA */
-    t = FIELD_DP64(t, ID_AA64MMFR2, TTL, 1); /* FEAT_TTL */
-    t = FIELD_DP64(t, ID_AA64MMFR2, BBM, 2); /* FEAT_BBM at level 2 */
+    t = FIELD_DP64(t, ID_AA64MMFR2, CNP, 1);      /* FEAT_TTCNP */
+    t = FIELD_DP64(t, ID_AA64MMFR2, UAO, 1);      /* FEAT_UAO */
+    t = FIELD_DP64(t, ID_AA64MMFR2, VARANGE, 1);  /* FEAT_LVA */
+    t = FIELD_DP64(t, ID_AA64MMFR2, ST, 1);       /* FEAT_TTST */
+    t = FIELD_DP64(t, ID_AA64MMFR2, TTL, 1);      /* FEAT_TTL */
+    t = FIELD_DP64(t, ID_AA64MMFR2, BBM, 2);      /* FEAT_BBM at level 2 */
     cpu->isar.id_aa64mmfr2 = t;
 
     t = cpu->isar.id_aa64zfr0;
     t = FIELD_DP64(t, ID_AA64ZFR0, SVEVER, 1);
-    t = FIELD_DP64(t, ID_AA64ZFR0, AES, 2);  /* PMULL */
-    t = FIELD_DP64(t, ID_AA64ZFR0, BITPERM, 1);
-    t = FIELD_DP64(t, ID_AA64ZFR0, BFLOAT16, 1);
-    t = FIELD_DP64(t, ID_AA64ZFR0, SHA3, 1);
-    t = FIELD_DP64(t, ID_AA64ZFR0, SM4, 1);
-    t = FIELD_DP64(t, ID_AA64ZFR0, I8MM, 1);
-    t = FIELD_DP64(t, ID_AA64ZFR0, F32MM, 1);
-    t = FIELD_DP64(t, ID_AA64ZFR0, F64MM, 1);
+    t = FIELD_DP64(t, ID_AA64ZFR0, AES, 2);       /* FEAT_SVE_PMULL128 */
+    t = FIELD_DP64(t, ID_AA64ZFR0, BITPERM, 1);   /* FEAT_SVE_BitPerm */
+    t = FIELD_DP64(t, ID_AA64ZFR0, BFLOAT16, 1);  /* FEAT_BF16 */
+    t = FIELD_DP64(t, ID_AA64ZFR0, SHA3, 1);      /* FEAT_SVE_SHA3 */
+    t = FIELD_DP64(t, ID_AA64ZFR0, SM4, 1);       /* FEAT_SVE_SM4 */
+    t = FIELD_DP64(t, ID_AA64ZFR0, I8MM, 1);      /* FEAT_I8MM */
+    t = FIELD_DP64(t, ID_AA64ZFR0, F32MM, 1);     /* FEAT_F32MM */
+    t = FIELD_DP64(t, ID_AA64ZFR0, F64MM, 1);     /* FEAT_F64MM */
     cpu->isar.id_aa64zfr0 = t;
 
     t = cpu->isar.id_aa64dfr0;
-    t = FIELD_DP64(t, ID_AA64DFR0, PMUVER, 5); /* v8.4-PMU */
+    t = FIELD_DP64(t, ID_AA64DFR0, PMUVER, 5);    /* FEAT_PMUv3p4 */
     cpu->isar.id_aa64dfr0 = t;
 
     /* Replicate the same data to the 32-bit id registers.  */
diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu_tcg.c
+++ b/target/arm/cpu_tcg.c
@@ -XXX,XX +XXX,XX @@ void aa32_max_features(ARMCPU *cpu)
 
     /* Add additional features supported by QEMU */
     t = cpu->isar.id_isar5;
-    t = FIELD_DP32(t, ID_ISAR5, AES, 2);
-    t = FIELD_DP32(t, ID_ISAR5, SHA1, 1);
-    t = FIELD_DP32(t, ID_ISAR5, SHA2, 1);
+    t = FIELD_DP32(t, ID_ISAR5, AES, 2);          /* FEAT_PMULL */
+    t = FIELD_DP32(t, ID_ISAR5, SHA1, 1);         /* FEAT_SHA1 */
+    t = FIELD_DP32(t, ID_ISAR5, SHA2, 1);         /* FEAT_SHA256 */
     t = FIELD_DP32(t, ID_ISAR5, CRC32, 1);
-    t = FIELD_DP32(t, ID_ISAR5, RDM, 1);
-    t = FIELD_DP32(t, ID_ISAR5, VCMA, 1);
+    t = FIELD_DP32(t, ID_ISAR5, RDM, 1);          /* FEAT_RDM */
+    t = FIELD_DP32(t, ID_ISAR5, VCMA, 1);         /* FEAT_FCMA */
     cpu->isar.id_isar5 = t;
 
     t = cpu->isar.id_isar6;
-    t = FIELD_DP32(t, ID_ISAR6, JSCVT, 1);
-    t = FIELD_DP32(t, ID_ISAR6, DP, 1);
-    t = FIELD_DP32(t, ID_ISAR6, FHM, 1);
-    t = FIELD_DP32(t, ID_ISAR6, SB, 1);
-    t = FIELD_DP32(t, ID_ISAR6, SPECRES, 1);
-    t = FIELD_DP32(t, ID_ISAR6, BF16, 1);
-    t = FIELD_DP32(t, ID_ISAR6, I8MM, 1);
+    t = FIELD_DP32(t, ID_ISAR6, JSCVT, 1);        /* FEAT_JSCVT */
+    t = FIELD_DP32(t, ID_ISAR6, DP, 1);           /* Feat_DotProd */
+    t = FIELD_DP32(t, ID_ISAR6, FHM, 1);          /* FEAT_FHM */
+    t = FIELD_DP32(t, ID_ISAR6, SB, 1);           /* FEAT_SB */
+    t = FIELD_DP32(t, ID_ISAR6, SPECRES, 1);      /* FEAT_SPECRES */
+    t = FIELD_DP32(t, ID_ISAR6, BF16, 1);         /* FEAT_AA32BF16 */
+    t = FIELD_DP32(t, ID_ISAR6, I8MM, 1);         /* FEAT_AA32I8MM */
     cpu->isar.id_isar6 = t;
 
     t = cpu->isar.mvfr1;
-    t = FIELD_DP32(t, MVFR1, FPHP, 3);     /* v8.2-FP16 */
-    t = FIELD_DP32(t, MVFR1, SIMDHP, 2);   /* v8.2-FP16 */
+    t = FIELD_DP32(t, MVFR1, FPHP, 3);            /* FEAT_FP16 */
+    t = FIELD_DP32(t, MVFR1, SIMDHP, 2);          /* FEAT_FP16 */
     cpu->isar.mvfr1 = t;
 
     t = cpu->isar.mvfr2;
-    t = FIELD_DP32(t, MVFR2, SIMDMISC, 3); /* SIMD MaxNum */
-    t = FIELD_DP32(t, MVFR2, FPMISC, 4);   /* FP MaxNum */
+    t = FIELD_DP32(t, MVFR2, SIMDMISC, 3);        /* SIMD MaxNum */
+    t = FIELD_DP32(t, MVFR2, FPMISC, 4);          /* FP MaxNum */
     cpu->isar.mvfr2 = t;
 
     t = cpu->isar.id_mmfr3;
-    t = FIELD_DP32(t, ID_MMFR3, PAN, 2); /* ATS1E1 */
+    t = FIELD_DP32(t, ID_MMFR3, PAN, 2);          /* FEAT_PAN2 */
     cpu->isar.id_mmfr3 = t;
 
     t = cpu->isar.id_mmfr4;
-    t = FIELD_DP32(t, ID_MMFR4, HPDS, 1); /* AA32HPD */
-    t = FIELD_DP32(t, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */
-    t = FIELD_DP32(t, ID_MMFR4, CNP, 1); /* TTCNP */
-    t = FIELD_DP32(t, ID_MMFR4, XNX, 1); /* TTS2UXN */
+    t = FIELD_DP32(t, ID_MMFR4, HPDS, 1);         /* FEAT_AA32HPD */
+    t = FIELD_DP32(t, ID_MMFR4, AC2, 1);          /* ACTLR2, HACTLR2 */
+    t = FIELD_DP32(t, ID_MMFR4, CNP, 1);          /* FEAT_TTCNP */
+    t = FIELD_DP32(t, ID_MMFR4, XNX, 1);          /* FEAT_XNX*/
     cpu->isar.id_mmfr4 = t;
 
     t = cpu->isar.id_pfr0;
-    t = FIELD_DP32(t, ID_PFR0, DIT, 1);
+    t = FIELD_DP32(t, ID_PFR0, DIT, 1);           /* FEAT_DIT */
     cpu->isar.id_pfr0 = t;
 
     t = cpu->isar.id_pfr2;
-    t = FIELD_DP32(t, ID_PFR2, SSBS, 1);
+    t = FIELD_DP32(t, ID_PFR2, SSBS, 1);          /* FEAT_SSBS */
     cpu->isar.id_pfr2 = t;
 
     t = cpu->isar.id_dfr0;
-    t = FIELD_DP32(t, ID_DFR0, PERFMON, 5); /* v8.4-PMU */
+    t = FIELD_DP32(t, ID_DFR0, PERFMON, 5);       /* FEAT_PMUv3p4 */
     cpu->isar.id_dfr0 = t;
 }
 
-- 
2.25.1

From: Richard Henderson <richard.henderson@linaro.org>

Use FIELD_DP{32,64} to manipulate id_pfr1 and id_aa64pfr0
during arm_cpu_realizefn.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu.c | 22 +++++++++++++---------
 1 file changed, 13 insertions(+), 9 deletions(-)

diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp)
          */
         unset_feature(env, ARM_FEATURE_EL3);
 
-        /* Disable the security extension feature bits in the processor feature
-         * registers as well. These are id_pfr1[7:4] and id_aa64pfr0[15:12].
+        /*
+         * Disable the security extension feature bits in the processor
+         * feature registers as well.
          */
-        cpu->isar.id_pfr1 &= ~0xf0;
-        cpu->isar.id_aa64pfr0 &= ~0xf000;
+        cpu->isar.id_pfr1 = FIELD_DP32(cpu->isar.id_pfr1, ID_PFR1, SECURITY, 0);
+        cpu->isar.id_aa64pfr0 = FIELD_DP64(cpu->isar.id_aa64pfr0,
+                                           ID_AA64PFR0, EL3, 0);
     }
 
     if (!cpu->has_el2) {
@@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp)
     }
 
     if (!arm_feature(env, ARM_FEATURE_EL2)) {
-        /* Disable the hypervisor feature bits in the processor feature
-         * registers if we don't have EL2. These are id_pfr1[15:12] and
-         * id_aa64pfr0_el1[11:8].
+        /*
+         * Disable the hypervisor feature bits in the processor feature
+         * registers if we don't have EL2.
          */
-        cpu->isar.id_aa64pfr0 &= ~0xf00;
-        cpu->isar.id_pfr1 &= ~0xf000;
+        cpu->isar.id_aa64pfr0 = FIELD_DP64(cpu->isar.id_aa64pfr0,
+                                           ID_AA64PFR0, EL2, 0);
+        cpu->isar.id_pfr1 = FIELD_DP32(cpu->isar.id_pfr1,
+                                       ID_PFR1, VIRTUALIZATION, 0);
     }
 
 #ifndef CONFIG_USER_ONLY
-- 
2.25.1

From: Richard Henderson <richard.henderson@linaro.org>

The only portion of FEAT_Debugv8p2 that is relevant to QEMU
is CONTEXTIDR_EL2, which is also conditionally implemented
with FEAT_VHE.  The rest of the debug extension concerns the
External debug interface, which is outside the scope of QEMU.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 docs/system/arm/emulation.rst | 1 +
 target/arm/cpu.c              | 1 +
 target/arm/cpu64.c            | 1 +
 target/arm/cpu_tcg.c          | 2 ++
 4 files changed, 5 insertions(+)

From: Richard Henderson <richard.henderson@linaro.org>

This extension concerns changes to the External Debug interface,
with Secure and Non-secure access to the debug registers, and all
of it is outside the scope of QEMU.  Indicating support for this
is mandatory with FEAT_SEL2, which we do implement.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 docs/system/arm/emulation.rst | 1 +
 target/arm/cpu64.c            | 2 +-
 target/arm/cpu_tcg.c          | 4 ++--
 3 files changed, 4 insertions(+), 3 deletions(-)

From: Richard Henderson <richard.henderson@linaro.org>

Add only the system registers required to implement zero error
records.  This means that all values for ERRSELR are out of range,
which means that it and all of the indexed error record registers
need not be implemented.

Add the EL2 registers required for injecting virtual SError.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu.h    |  5 +++
 target/arm/helper.c | 84 +++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 89 insertions(+)

diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState {
         uint64_t tfsr_el[4]; /* tfsre0_el1 is index 0.  */
         uint64_t gcr_el1;
         uint64_t rgsr_el1;
+
+        /* Minimal RAS registers */
+        uint64_t disr_el1;
+        uint64_t vdisr_el2;
+        uint64_t vsesr_el2;
     } cp15;
 
     struct {
diff --git a/target/arm/helper.c b/target/arm/helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo debug_lpae_cp_reginfo[] = {
       .access = PL0_R, .type = ARM_CP_CONST|ARM_CP_64BIT, .resetvalue = 0 },
 };
 
+/*
+ * Check for traps to RAS registers, which are controlled
+ * by HCR_EL2.TERR and SCR_EL3.TERR.
+ */
+static CPAccessResult access_terr(CPUARMState *env, const ARMCPRegInfo *ri,
+                                  bool isread)
+{
+    int el = arm_current_el(env);
+
+    if (el < 2 && (arm_hcr_el2_eff(env) & HCR_TERR)) {
+        return CP_ACCESS_TRAP_EL2;
+    }
+    if (el < 3 && (env->cp15.scr_el3 & SCR_TERR)) {
+        return CP_ACCESS_TRAP_EL3;
+    }
+    return CP_ACCESS_OK;
+}
+
+static uint64_t disr_read(CPUARMState *env, const ARMCPRegInfo *ri)
+{
+    int el = arm_current_el(env);
+
+    if (el < 2 && (arm_hcr_el2_eff(env) & HCR_AMO)) {
+        return env->cp15.vdisr_el2;
+    }
+    if (el < 3 && (env->cp15.scr_el3 & SCR_EA)) {
+        return 0; /* RAZ/WI */
+    }
+    return env->cp15.disr_el1;
+}
+
+static void disr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t val)
+{
+    int el = arm_current_el(env);
+
+    if (el < 2 && (arm_hcr_el2_eff(env) & HCR_AMO)) {
+        env->cp15.vdisr_el2 = val;
+        return;
+    }
+    if (el < 3 && (env->cp15.scr_el3 & SCR_EA)) {
+        return; /* RAZ/WI */
+    }
+    env->cp15.disr_el1 = val;
+}
+
+/*
+ * Minimal RAS implementation with no Error Records.
+ * Which means that all of the Error Record registers:
+ *   ERXADDR_EL1
+ *   ERXCTLR_EL1
+ *   ERXFR_EL1
+ *   ERXMISC0_EL1
+ *   ERXMISC1_EL1
+ *   ERXMISC2_EL1
+ *   ERXMISC3_EL1
+ *   ERXPFGCDN_EL1  (RASv1p1)
+ *   ERXPFGCTL_EL1  (RASv1p1)
+ *   ERXPFGF_EL1    (RASv1p1)
+ *   ERXSTATUS_EL1
+ * and
+ *   ERRSELR_EL1
+ * may generate UNDEFINED, which is the effect we get by not
+ * listing them at all.
+ */
+static const ARMCPRegInfo minimal_ras_reginfo[] = {
+    { .name = "DISR_EL1", .state = ARM_CP_STATE_BOTH,
+      .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 1, .opc2 = 1,
+      .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.disr_el1),
+      .readfn = disr_read, .writefn = disr_write, .raw_writefn = raw_write },
+    { .name = "ERRIDR_EL1", .state = ARM_CP_STATE_BOTH,
+      .opc0 = 3, .opc1 = 0, .crn = 5, .crm = 3, .opc2 = 0,
+      .access = PL1_R, .accessfn = access_terr,
+      .type = ARM_CP_CONST, .resetvalue = 0 },
+    { .name = "VDISR_EL2", .state = ARM_CP_STATE_BOTH,
+      .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 1, .opc2 = 1,
+      .access = PL2_RW, .fieldoffset = offsetof(CPUARMState, cp15.vdisr_el2) },
+    { .name = "VSESR_EL2", .state = ARM_CP_STATE_BOTH,
+      .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 2, .opc2 = 3,
+      .access = PL2_RW, .fieldoffset = offsetof(CPUARMState, cp15.vsesr_el2) },
+};
+
 /* Return the exception level to which exceptions should be taken
  * via SVEAccessTrap.  If an exception should be routed through
  * AArch64.AdvSIMDFPAccessTrap, return 0; fp_exception_el should
@@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu)
     if (cpu_isar_feature(aa64_ssbs, cpu)) {
         define_one_arm_cp_reg(cpu, &ssbs_reginfo);
     }
+    if (cpu_isar_feature(any_ras, cpu)) {
+        define_arm_cp_regs(cpu, minimal_ras_reginfo);
+    }
 
     if (cpu_isar_feature(aa64_vh, cpu) ||
         cpu_isar_feature(aa64_debugv8p2, cpu)) {
-- 
2.25.1

From: Richard Henderson <richard.henderson@linaro.org>

Enable writes to the TERR and TEA bits when RAS is enabled.
These bits are otherwise RES0.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/helper.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/target/arm/helper.c b/target/arm/helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -XXX,XX +XXX,XX @@ static void scr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value)
         }
         valid_mask &= ~SCR_NET;
 
+        if (cpu_isar_feature(aa64_ras, cpu)) {
+            valid_mask |= SCR_TERR;
+        }
         if (cpu_isar_feature(aa64_lor, cpu)) {
             valid_mask |= SCR_TLOR;
         }
@@ -XXX,XX +XXX,XX @@ static void scr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value)
         }
     } else {
         valid_mask &= ~(SCR_RW | SCR_ST);
+        if (cpu_isar_feature(aa32_ras, cpu)) {
+            valid_mask |= SCR_TERR;
+        }
     }
 
     if (!arm_feature(env, ARM_FEATURE_EL2)) {
@@ -XXX,XX +XXX,XX @@ static void do_hcr_write(CPUARMState *env, uint64_t value, uint64_t valid_mask)
         if (cpu_isar_feature(aa64_vh, cpu)) {
             valid_mask |= HCR_E2H;
         }
+        if (cpu_isar_feature(aa64_ras, cpu)) {
+            valid_mask |= HCR_TERR | HCR_TEA;
+        }
         if (cpu_isar_feature(aa64_lor, cpu)) {
             valid_mask |= HCR_TLOR;
         }
-- 
2.25.1

From: Richard Henderson <richard.henderson@linaro.org>

Virtual SError exceptions are raised by setting HCR_EL2.VSE,
and are routed to EL1 just like other virtual exceptions.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu.h       |  2 ++
 target/arm/internals.h |  8 ++++++++
 target/arm/syndrome.h  |  5 +++++
 target/arm/cpu.c       | 38 +++++++++++++++++++++++++++++++++++++-
 target/arm/helper.c    | 40 +++++++++++++++++++++++++++++++++++++++-
 5 files changed, 91 insertions(+), 2 deletions(-)

diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -XXX,XX +XXX,XX @@
 #define EXCP_LSERR          21   /* v8M LSERR SecureFault */
 #define EXCP_UNALIGNED      22   /* v7M UNALIGNED UsageFault */
 #define EXCP_DIVBYZERO      23   /* v7M DIVBYZERO UsageFault */
+#define EXCP_VSERR          24
 /* NB: add new EXCP_ defines to the array in arm_log_exception() too */
 
 #define ARMV7M_EXCP_RESET   1
@@ -XXX,XX +XXX,XX @@ enum {
 #define CPU_INTERRUPT_FIQ   CPU_INTERRUPT_TGT_EXT_1
 #define CPU_INTERRUPT_VIRQ  CPU_INTERRUPT_TGT_EXT_2
 #define CPU_INTERRUPT_VFIQ  CPU_INTERRUPT_TGT_EXT_3
+#define CPU_INTERRUPT_VSERR CPU_INTERRUPT_TGT_INT_0
 
 /* The usual mapping for an AArch64 system register to its AArch32
  * counterpart is for the 32 bit world to have access to the lower
diff --git a/target/arm/internals.h b/target/arm/internals.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/internals.h
+++ b/target/arm/internals.h
@@ -XXX,XX +XXX,XX @@ void arm_cpu_update_virq(ARMCPU *cpu);
  */
 void arm_cpu_update_vfiq(ARMCPU *cpu);
 
+/**
+ * arm_cpu_update_vserr: Update CPU_INTERRUPT_VSERR bit
+ *
+ * Update the CPU_INTERRUPT_VSERR bit in cs->interrupt_request,
+ * following a change to the HCR_EL2.VSE bit.
+ */
+void arm_cpu_update_vserr(ARMCPU *cpu);
+
 /**
  * arm_mmu_idx_el:
  * @env: The cpu environment
diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_pcalignment(void)
     return (EC_PCALIGNMENT << ARM_EL_EC_SHIFT) | ARM_EL_IL;
 }
 
+static inline uint32_t syn_serror(uint32_t extra)
+{
+    return (EC_SERROR << ARM_EL_EC_SHIFT) | ARM_EL_IL | extra;
+}
+
 #endif /* TARGET_ARM_SYNDROME_H */
diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -XXX,XX +XXX,XX @@ static bool arm_cpu_has_work(CPUState *cs)
     return (cpu->power_state != PSCI_OFF)
         && cs->interrupt_request &
         (CPU_INTERRUPT_FIQ | CPU_INTERRUPT_HARD
-         | CPU_INTERRUPT_VFIQ | CPU_INTERRUPT_VIRQ
+         | CPU_INTERRUPT_VFIQ | CPU_INTERRUPT_VIRQ | CPU_INTERRUPT_VSERR
          | CPU_INTERRUPT_EXITTB);
 }
 
@@ -XXX,XX +XXX,XX @@ static inline bool arm_excp_unmasked(CPUState *cs, unsigned int excp_idx,
             return false;
         }
         return !(env->daif & PSTATE_I);
+    case EXCP_VSERR:
+        if (!(hcr_el2 & HCR_AMO) || (hcr_el2 & HCR_TGE)) {
+            /* VIRQs are only taken when hypervized.  */
+            return false;
+        }
+        return !(env->daif & PSTATE_A);
     default:
         g_assert_not_reached();
     }
@@ -XXX,XX +XXX,XX @@ static bool arm_cpu_exec_interrupt(CPUState *cs, int interrupt_request)
             goto found;
         }
     }
+    if (interrupt_request & CPU_INTERRUPT_VSERR) {
+        excp_idx = EXCP_VSERR;
+        target_el = 1;
+        if (arm_excp_unmasked(cs, excp_idx, target_el,
+                              cur_el, secure, hcr_el2)) {
+            /* Taking a virtual abort clears HCR_EL2.VSE */
+            env->cp15.hcr_el2 &= ~HCR_VSE;
+            cpu_reset_interrupt(cs, CPU_INTERRUPT_VSERR);
+            goto found;
+        }
+    }
     return false;
 
  found:
@@ -XXX,XX +XXX,XX @@ void arm_cpu_update_vfiq(ARMCPU *cpu)
     }
 }
 
+void arm_cpu_update_vserr(ARMCPU *cpu)
+{
+    /*
+     * Update the interrupt level for VSERR, which is the HCR_EL2.VSE bit.
+     */
+    CPUARMState *env = &cpu->env;
+    CPUState *cs = CPU(cpu);
+
+    bool new_state = env->cp15.hcr_el2 & HCR_VSE;
+
+    if (new_state != ((cs->interrupt_request & CPU_INTERRUPT_VSERR) != 0)) {
+        if (new_state) {
+            cpu_interrupt(cs, CPU_INTERRUPT_VSERR);
+        } else {
+            cpu_reset_interrupt(cs, CPU_INTERRUPT_VSERR);
+        }
+    }
+}
+
 #ifndef CONFIG_USER_ONLY
 static void arm_cpu_set_irq(void *opaque, int irq, int level)
 {
diff --git a/target/arm/helper.c b/target/arm/helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -XXX,XX +XXX,XX @@ static uint64_t isr_read(CPUARMState *env, const ARMCPRegInfo *ri)
         }
     }
 
-    /* External aborts are not possible in QEMU so A bit is always clear */
+    if (hcr_el2 & HCR_AMO) {
+        if (cs->interrupt_request & CPU_INTERRUPT_VSERR) {
+            ret |= CPSR_A;
+        }
+    }
+
     return ret;
 }
 
@@ -XXX,XX +XXX,XX @@ static void do_hcr_write(CPUARMState *env, uint64_t value, uint64_t valid_mask)
     g_assert(qemu_mutex_iothread_locked());
     arm_cpu_update_virq(cpu);
     arm_cpu_update_vfiq(cpu);
+    arm_cpu_update_vserr(cpu);
 }
 
 static void hcr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value)
@@ -XXX,XX +XXX,XX @@ void arm_log_exception(CPUState *cs)
             [EXCP_LSERR] = "v8M LSERR UsageFault",
             [EXCP_UNALIGNED] = "v7M UNALIGNED UsageFault",
             [EXCP_DIVBYZERO] = "v7M DIVBYZERO UsageFault",
+            [EXCP_VSERR] = "Virtual SERR",
         };
 
         if (idx >= 0 && idx < ARRAY_SIZE(excnames)) {
@@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch32(CPUState *cs)
         mask = CPSR_A | CPSR_I | CPSR_F;
         offset = 4;
         break;
+    case EXCP_VSERR:
+        {
+            /*
+             * Note that this is reported as a data abort, but the DFAR
+             * has an UNKNOWN value.  Construct the SError syndrome from
+             * AET and ExT fields.
+             */
+            ARMMMUFaultInfo fi = { .type = ARMFault_AsyncExternal, };
+
+            if (extended_addresses_enabled(env)) {
+                env->exception.fsr = arm_fi_to_lfsc(&fi);
+            } else {
+                env->exception.fsr = arm_fi_to_sfsc(&fi);
+            }
+            env->exception.fsr |= env->cp15.vsesr_el2 & 0xd000;
+            A32_BANKED_CURRENT_REG_SET(env, dfsr, env->exception.fsr);
+            qemu_log_mask(CPU_LOG_INT, "...with IFSR 0x%x\n",
+                          env->exception.fsr);
+
+            new_mode = ARM_CPU_MODE_ABT;
+            addr = 0x10;
+            mask = CPSR_A | CPSR_I;
+            offset = 8;
+        }
+        break;
     case EXCP_SMC:
         new_mode = ARM_CPU_MODE_MON;
         addr = 0x08;
@@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch64(CPUState *cs)
     case EXCP_VFIQ:
         addr += 0x100;
         break;
+    case EXCP_VSERR:
+        addr += 0x180;
+        /* Construct the SError syndrome from IDS and ISS fields. */
+        env->exception.syndrome = syn_serror(env->cp15.vsesr_el2 & 0x1ffffff);
+        env->cp15.esr_el[new_el] = env->exception.syndrome;
+        break;
     default:
         cpu_abort(cs, "Unhandled exception 0x%x\n", cs->exception_index);
     }
-- 
2.25.1

From: Richard Henderson <richard.henderson@linaro.org>

Check for and defer any pending virtual SError.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/helper.h        |  1 +
 target/arm/a32.decode      | 16 ++++++++------
 target/arm/t32.decode      | 18 ++++++++--------
 target/arm/op_helper.c     | 43 ++++++++++++++++++++++++++++++++++++++
 target/arm/translate-a64.c | 17 +++++++++++++++
 target/arm/translate.c     | 23 ++++++++++++++++++++
 6 files changed, 103 insertions(+), 15 deletions(-)

diff --git a/target/arm/helper.h b/target/arm/helper.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/helper.h
+++ b/target/arm/helper.h
@@ -XXX,XX +XXX,XX @@ DEF_HELPER_1(wfe, void, env)
 DEF_HELPER_1(yield, void, env)
 DEF_HELPER_1(pre_hvc, void, env)
 DEF_HELPER_2(pre_smc, void, env, i32)
+DEF_HELPER_1(vesb, void, env)
 
 DEF_HELPER_3(cpsr_write, void, env, i32, i32)
 DEF_HELPER_2(cpsr_write_eret, void, env, i32)
diff --git a/target/arm/a32.decode b/target/arm/a32.decode
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/a32.decode
+++ b/target/arm/a32.decode
@@ -XXX,XX +XXX,XX @@ SMULTT           .... 0001 0110 .... 0000 .... 1110 ....      @rd0mn
 
 {
   {
-    YIELD        ---- 0011 0010 0000 1111 ---- 0000 0001
-    WFE          ---- 0011 0010 0000 1111 ---- 0000 0010
-    WFI          ---- 0011 0010 0000 1111 ---- 0000 0011
+    [
+      YIELD      ---- 0011 0010 0000 1111 ---- 0000 0001
+      WFE        ---- 0011 0010 0000 1111 ---- 0000 0010
+      WFI        ---- 0011 0010 0000 1111 ---- 0000 0011
 
-    # TODO: Implement SEV, SEVL; may help SMP performance.
-    # SEV        ---- 0011 0010 0000 1111 ---- 0000 0100
-    # SEVL       ---- 0011 0010 0000 1111 ---- 0000 0101
+      # TODO: Implement SEV, SEVL; may help SMP performance.
+      # SEV      ---- 0011 0010 0000 1111 ---- 0000 0100
+      # SEVL     ---- 0011 0010 0000 1111 ---- 0000 0101
+
+      ESB        ---- 0011 0010 0000 1111 ---- 0001 0000
+    ]
 
     # The canonical nop ends in 00000000, but the whole of the
     # rest of the space executes as nop if otherwise unsupported.
diff --git a/target/arm/t32.decode b/target/arm/t32.decode
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/t32.decode
+++ b/target/arm/t32.decode
@@ -XXX,XX +XXX,XX @@ CLZ              1111 1010 1011 ---- 1111 .... 1000 ....      @rdm
   [
     # Hints, and CPS
     {
-      YIELD      1111 0011 1010 1111 1000 0000 0000 0001
-      WFE        1111 0011 1010 1111 1000 0000 0000 0010
-      WFI        1111 0011 1010 1111 1000 0000 0000 0011
+      [
+        YIELD    1111 0011 1010 1111 1000 0000 0000 0001
+        WFE      1111 0011 1010 1111 1000 0000 0000 0010
+        WFI      1111 0011 1010 1111 1000 0000 0000 0011
 
-      # TODO: Implement SEV, SEVL; may help SMP performance.
-      # SEV      1111 0011 1010 1111 1000 0000 0000 0100
-      # SEVL     1111 0011 1010 1111 1000 0000 0000 0101
+        # TODO: Implement SEV, SEVL; may help SMP performance.
+        # SEV    1111 0011 1010 1111 1000 0000 0000 0100
+        # SEVL   1111 0011 1010 1111 1000 0000 0000 0101
 
-      # For M-profile minimal-RAS ESB can be a NOP, which is the
-      # default behaviour since it is in the hint space.
-      # ESB      1111 0011 1010 1111 1000 0000 0001 0000
+        ESB      1111 0011 1010 1111 1000 0000 0001 0000
+      ]
 
       # The canonical nop ends in 0000 0000, but the whole rest
       # of the space is "reserved hint, behaves as nop".
diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/op_helper.c
+++ b/target/arm/op_helper.c
@@ -XXX,XX +XXX,XX @@ void HELPER(probe_access)(CPUARMState *env, target_ulong ptr,
                      access_type, mmu_idx, ra);
     }
 }
+
+/*
+ * This function corresponds to AArch64.vESBOperation().
+ * Note that the AArch32 version is not functionally different.
+ */
+void HELPER(vesb)(CPUARMState *env)
+{
+    /*
+     * The EL2Enabled() check is done inside arm_hcr_el2_eff,
+     * and will return HCR_EL2.VSE == 0, so nothing happens.
+     */
+    uint64_t hcr = arm_hcr_el2_eff(env);
+    bool enabled = !(hcr & HCR_TGE) && (hcr & HCR_AMO);
+    bool pending = enabled && (hcr & HCR_VSE);
+    bool masked  = (env->daif & PSTATE_A);
+
+    /* If VSE pending and masked, defer the exception.  */
+    if (pending && masked) {
+        uint32_t syndrome;
+
+        if (arm_el_is_aa64(env, 1)) {
+            /* Copy across IDS and ISS from VSESR. */
+            syndrome = env->cp15.vsesr_el2 & 0x1ffffff;
+        } else {
+            ARMMMUFaultInfo fi = { .type = ARMFault_AsyncExternal };
+
+            if (extended_addresses_enabled(env)) {
+                syndrome = arm_fi_to_lfsc(&fi);
+            } else {
+                syndrome = arm_fi_to_sfsc(&fi);
+            }
+            /* Copy across AET and ExT from VSESR. */
+            syndrome |= env->cp15.vsesr_el2 & 0xd000;
+        }
+
+        /* Set VDISR_EL2.A along with the syndrome. */
+        env->cp15.vdisr_el2 = syndrome | (1u << 31);
+
+        /* Clear pending virtual SError */
+        env->cp15.hcr_el2 &= ~HCR_VSE;
+        cpu_reset_interrupt(env_cpu(env), CPU_INTERRUPT_VSERR);
+    }
+}
diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/translate-a64.c
+++ b/target/arm/translate-a64.c
@@ -XXX,XX +XXX,XX @@ static void handle_hint(DisasContext *s, uint32_t insn,
             gen_helper_autib(cpu_X[17], cpu_env, cpu_X[17], cpu_X[16]);
         }
         break;
+    case 0b10000: /* ESB */
+        /* Without RAS, we must implement this as NOP. */
+        if (dc_isar_feature(aa64_ras, s)) {
+            /*
+             * QEMU does not have a source of physical SErrors,
+             * so we are only concerned with virtual SErrors.
+             * The pseudocode in the ARM for this case is
+             *   if PSTATE.EL IN {EL0, EL1} && EL2Enabled() then
+             *      AArch64.vESBOperation();
+             * Most of the condition can be evaluated at translation time.
+             * Test for EL2 present, and defer test for SEL2 to runtime.
+             */
+            if (s->current_el <= 1 && arm_dc_feature(s, ARM_FEATURE_EL2)) {
+                gen_helper_vesb(cpu_env);
+            }
+        }
+        break;
     case 0b11000: /* PACIAZ */
         if (s->pauth_active) {
             gen_helper_pacia(cpu_X[30], cpu_env, cpu_X[30],
diff --git a/target/arm/translate.c b/target/arm/translate.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/translate.c
+++ b/target/arm/translate.c
@@ -XXX,XX +XXX,XX @@ static bool trans_WFI(DisasContext *s, arg_WFI *a)
     return true;
 }
 
+static bool trans_ESB(DisasContext *s, arg_ESB *a)
+{
+    /*
+     * For M-profile, minimal-RAS ESB can be a NOP.
+     * Without RAS, we must implement this as NOP.
+     */
+    if (!arm_dc_feature(s, ARM_FEATURE_M) && dc_isar_feature(aa32_ras, s)) {
+        /*
+         * QEMU does not have a source of physical SErrors,
+         * so we are only concerned with virtual SErrors.
+         * The pseudocode in the ARM for this case is
+         *   if PSTATE.EL IN {EL0, EL1} && EL2Enabled() then
+         *      AArch32.vESBOperation();
+         * Most of the condition can be evaluated at translation time.
+         * Test for EL2 present, and defer test for SEL2 to runtime.
+         */
+        if (s->current_el <= 1 && arm_dc_feature(s, ARM_FEATURE_EL2)) {
+            gen_helper_vesb(cpu_env);
+        }
+    }
+    return true;
+}
+
 static bool trans_NOP(DisasContext *s, arg_NOP *a)
 {
     return true;
-- 
2.25.1

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 docs/system/arm/emulation.rst | 1 +
 target/arm/cpu64.c            | 1 +
 target/arm/cpu_tcg.c          | 1 +
 3 files changed, 3 insertions(+)

From: Richard Henderson <richard.henderson@linaro.org>

This feature is AArch64 only, and applies to physical SErrors,
which QEMU does not implement, thus the feature is a nop.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-19-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 docs/system/arm/emulation.rst | 1 +
 target/arm/cpu64.c            | 1 +
 2 files changed, 2 insertions(+)

From: Richard Henderson <richard.henderson@linaro.org>

This extension concerns branch speculation, which TCG does
not implement.  Thus we can trivially enable this feature.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-20-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 docs/system/arm/emulation.rst | 1 +
 target/arm/cpu64.c            | 1 +
 target/arm/cpu_tcg.c          | 1 +
 3 files changed, 3 insertions(+)

From: Richard Henderson <richard.henderson@linaro.org>

There is no branch prediction in TCG, therefore there is no
need to actually include the context number into the predictor.
Therefore all we need to do is add the state for SCXTNUM_ELx.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 docs/system/arm/emulation.rst |  3 ++
 target/arm/cpu.h              | 16 +++++++++
 target/arm/cpu.c              |  5 +++
 target/arm/cpu64.c            |  3 +-
 target/arm/helper.c           | 61 ++++++++++++++++++++++++++++++++++-
 5 files changed, 86 insertions(+), 2 deletions(-)

diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst
index XXXXXXX..XXXXXXX 100644
--- a/docs/system/arm/emulation.rst
+++ b/docs/system/arm/emulation.rst
@@ -XXX,XX +XXX,XX @@ the following architecture extensions:
 - FEAT_BF16 (AArch64 BFloat16 instructions)
 - FEAT_BTI (Branch Target Identification)
 - FEAT_CSV2 (Cache speculation variant 2)
+- FEAT_CSV2_1p1 (Cache speculation variant 2, version 1.1)
+- FEAT_CSV2_1p2 (Cache speculation variant 2, version 1.2)
+- FEAT_CSV2_2 (Cache speculation variant 2, version 2)
 - FEAT_DIT (Data Independent Timing instructions)
 - FEAT_DPB (DC CVAP instruction)
 - FEAT_Debugv8p2 (Debug changes for v8.2)
diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState {
         ARMPACKey apdb;
         ARMPACKey apga;
     } keys;
+
+    uint64_t scxtnum_el[4];
 #endif
 
 #if defined(CONFIG_USER_ONLY)
@@ -XXX,XX +XXX,XX @@ void pmu_init(ARMCPU *cpu);
 #define SCTLR_WXN     (1U << 19)
 #define SCTLR_ST      (1U << 20) /* up to ??, RAZ in v6 */
 #define SCTLR_UWXN    (1U << 20) /* v7 onward, AArch32 only */
+#define SCTLR_TSCXT   (1U << 20) /* FEAT_CSV2_1p2, AArch64 only */
 #define SCTLR_FI      (1U << 21) /* up to v7, v8 RES0 */
 #define SCTLR_IESB    (1U << 21) /* v8.2-IESB, AArch64 only */
 #define SCTLR_U       (1U << 22) /* up to v6, RAO in v7 */
@@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa64_dit(const ARMISARegisters *id)
     return FIELD_EX64(id->id_aa64pfr0, ID_AA64PFR0, DIT) != 0;
 }
 
+static inline bool isar_feature_aa64_scxtnum(const ARMISARegisters *id)
+{
+    int key = FIELD_EX64(id->id_aa64pfr0, ID_AA64PFR0, CSV2);
+    if (key >= 2) {
+        return true;      /* FEAT_CSV2_2 */
+    }
+    if (key == 1) {
+        key = FIELD_EX64(id->id_aa64pfr1, ID_AA64PFR1, CSV2_FRAC);
+        return key >= 2;  /* FEAT_CSV2_1p2 */
+    }
+    return false;
+}
+
 static inline bool isar_feature_aa64_ssbs(const ARMISARegisters *id)
 {
     return FIELD_EX64(id->id_aa64pfr1, ID_AA64PFR1, SSBS) != 0;
diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(DeviceState *dev)
              */
             env->cp15.gcr_el1 = 0x1ffff;
         }
+        /*
+         * Disable access to SCXTNUM_EL0 from CSV2_1p2.
+         * This is not yet exposed from the Linux kernel in any way.
+         */
+        env->cp15.sctlr_el[1] |= SCTLR_TSCXT;
 #else
         /* Reset into the highest available EL */
         if (arm_feature(env, ARM_FEATURE_EL3)) {
diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu64.c
+++ b/target/arm/cpu64.c
@@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj)
     t = FIELD_DP64(t, ID_AA64PFR0, SVE, 1);
     t = FIELD_DP64(t, ID_AA64PFR0, SEL2, 1);      /* FEAT_SEL2 */
     t = FIELD_DP64(t, ID_AA64PFR0, DIT, 1);       /* FEAT_DIT */
-    t = FIELD_DP64(t, ID_AA64PFR0, CSV2, 1);      /* FEAT_CSV2 */
+    t = FIELD_DP64(t, ID_AA64PFR0, CSV2, 2);      /* FEAT_CSV2_2 */
     cpu->isar.id_aa64pfr0 = t;
 
     t = cpu->isar.id_aa64pfr1;
@@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj)
      * we do for EL2 with the virtualization=on property.
      */
     t = FIELD_DP64(t, ID_AA64PFR1, MTE, 3);       /* FEAT_MTE3 */
+    t = FIELD_DP64(t, ID_AA64PFR1, CSV2_FRAC, 0); /* FEAT_CSV2_2 */
     cpu->isar.id_aa64pfr1 = t;
 
     t = cpu->isar.id_aa64mmfr0;
diff --git a/target/arm/helper.c b/target/arm/helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -XXX,XX +XXX,XX @@ static void scr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value)
         if (cpu_isar_feature(aa64_mte, cpu)) {
             valid_mask |= SCR_ATA;
         }
+        if (cpu_isar_feature(aa64_scxtnum, cpu)) {
+            valid_mask |= SCR_ENSCXT;
+        }
     } else {
         valid_mask &= ~(SCR_RW | SCR_ST);
         if (cpu_isar_feature(aa32_ras, cpu)) {
@@ -XXX,XX +XXX,XX @@ static void do_hcr_write(CPUARMState *env, uint64_t value, uint64_t valid_mask)
         if (cpu_isar_feature(aa64_mte, cpu)) {
             valid_mask |= HCR_ATA | HCR_DCT | HCR_TID5;
         }
+        if (cpu_isar_feature(aa64_scxtnum, cpu)) {
+            valid_mask |= HCR_ENSCXT;
+        }
     }
 
     /* Clear RES0 bits.  */
@@ -XXX,XX +XXX,XX @@ static void define_arm_vh_e2h_redirects_aliases(ARMCPU *cpu)
         { K(3, 0,  5, 6, 0), K(3, 4,  5, 6, 0), K(3, 5, 5, 6, 0),
           "TFSR_EL1", "TFSR_EL2", "TFSR_EL12", isar_feature_aa64_mte },
 
+        { K(3, 0, 13, 0, 7), K(3, 4, 13, 0, 7), K(3, 5, 13, 0, 7),
+          "SCXTNUM_EL1", "SCXTNUM_EL2", "SCXTNUM_EL12",
+          isar_feature_aa64_scxtnum },
+
         /* TODO: ARMv8.2-SPE -- PMSCR_EL2 */
         /* TODO: ARMv8.4-Trace -- TRFCR_EL2 */
     };
@@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo mte_el0_cacheop_reginfo[] = {
     },
 };
 
-#endif
+static CPAccessResult access_scxtnum(CPUARMState *env, const ARMCPRegInfo *ri,
+                                     bool isread)
+{
+    uint64_t hcr = arm_hcr_el2_eff(env);
+    int el = arm_current_el(env);
+
+    if (el == 0 && !((hcr & HCR_E2H) && (hcr & HCR_TGE))) {
+        if (env->cp15.sctlr_el[1] & SCTLR_TSCXT) {
+            if (hcr & HCR_TGE) {
+                return CP_ACCESS_TRAP_EL2;
+            }
+            return CP_ACCESS_TRAP;
+        }
+    } else if (el < 2 && (env->cp15.sctlr_el[2] & SCTLR_TSCXT)) {
+        return CP_ACCESS_TRAP_EL2;
+    }
+    if (el < 2 && arm_is_el2_enabled(env) && !(hcr & HCR_ENSCXT)) {
+        return CP_ACCESS_TRAP_EL2;
+    }
+    if (el < 3
+        && arm_feature(env, ARM_FEATURE_EL3)
+        && !(env->cp15.scr_el3 & SCR_ENSCXT)) {
+        return CP_ACCESS_TRAP_EL3;
+    }
+    return CP_ACCESS_OK;
+}
+
+static const ARMCPRegInfo scxtnum_reginfo[] = {
+    { .name = "SCXTNUM_EL0", .state = ARM_CP_STATE_AA64,
+      .opc0 = 3, .opc1 = 3, .crn = 13, .crm = 0, .opc2 = 7,
+      .access = PL0_RW, .accessfn = access_scxtnum,
+      .fieldoffset = offsetof(CPUARMState, scxtnum_el[0]) },
+    { .name = "SCXTNUM_EL1", .state = ARM_CP_STATE_AA64,
+      .opc0 = 3, .opc1 = 0, .crn = 13, .crm = 0, .opc2 = 7,
+      .access = PL1_RW, .accessfn = access_scxtnum,
+      .fieldoffset = offsetof(CPUARMState, scxtnum_el[1]) },
+    { .name = "SCXTNUM_EL2", .state = ARM_CP_STATE_AA64,
+      .opc0 = 3, .opc1 = 4, .crn = 13, .crm = 0, .opc2 = 7,
+      .access = PL2_RW, .accessfn = access_scxtnum,
+      .fieldoffset = offsetof(CPUARMState, scxtnum_el[2]) },
+    { .name = "SCXTNUM_EL3", .state = ARM_CP_STATE_AA64,
+      .opc0 = 3, .opc1 = 6, .crn = 13, .crm = 0, .opc2 = 7,
+      .access = PL3_RW,
+      .fieldoffset = offsetof(CPUARMState, scxtnum_el[3]) },
+};
+#endif /* TARGET_AARCH64 */
 
 static CPAccessResult access_predinv(CPUARMState *env, const ARMCPRegInfo *ri,
                                      bool isread)
@@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu)
         define_arm_cp_regs(cpu, mte_tco_ro_reginfo);
         define_arm_cp_regs(cpu, mte_el0_cacheop_reginfo);
     }
+
+    if (cpu_isar_feature(aa64_scxtnum, cpu)) {
+        define_arm_cp_regs(cpu, scxtnum_reginfo);
+    }
 #endif
 
     if (cpu_isar_feature(any_predinv, cpu)) {
-- 
2.25.1

From: Richard Henderson <richard.henderson@linaro.org>

This extension concerns cache speculation, which TCG does
not implement.  Thus we can trivially enable this feature.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-22-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 docs/system/arm/emulation.rst | 1 +
 target/arm/cpu64.c            | 1 +
 target/arm/cpu_tcg.c          | 1 +
 3 files changed, 3 insertions(+)

From: Richard Henderson <richard.henderson@linaro.org>

This extension concerns not merging memory access, which TCG does
not implement.  Thus we can trivially enable this feature.
Add a comment to handle_hint for the DGH instruction, but no code.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-23-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 docs/system/arm/emulation.rst | 1 +
 target/arm/cpu64.c            | 1 +
 target/arm/translate-a64.c    | 1 +
 3 files changed, 3 insertions(+)

From: Richard Henderson <richard.henderson@linaro.org>

Enable the a76 for virt and sbsa board use.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-24-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 docs/system/arm/virt.rst |  1 +
 hw/arm/sbsa-ref.c        |  1 +
 hw/arm/virt.c            |  1 +
 target/arm/cpu64.c       | 66 ++++++++++++++++++++++++++++++++++++++++
 4 files changed, 69 insertions(+)

diff --git a/docs/system/arm/virt.rst b/docs/system/arm/virt.rst
index XXXXXXX..XXXXXXX 100644
--- a/docs/system/arm/virt.rst
+++ b/docs/system/arm/virt.rst
@@ -XXX,XX +XXX,XX @@ Supported guest CPU types:
 - ``cortex-a53`` (64-bit)
 - ``cortex-a57`` (64-bit)
 - ``cortex-a72`` (64-bit)
+- ``cortex-a76`` (64-bit)
 - ``a64fx`` (64-bit)
 - ``host`` (with KVM only)
 - ``max`` (same as ``host`` for KVM; best possible emulation with TCG)
diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/sbsa-ref.c
+++ b/hw/arm/sbsa-ref.c
@@ -XXX,XX +XXX,XX @@ static const int sbsa_ref_irqmap[] = {
 static const char * const valid_cpus[] = {
     ARM_CPU_TYPE_NAME("cortex-a57"),
     ARM_CPU_TYPE_NAME("cortex-a72"),
+    ARM_CPU_TYPE_NAME("cortex-a76"),
     ARM_CPU_TYPE_NAME("max"),
 };
 
diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -XXX,XX +XXX,XX @@ static const char *valid_cpus[] = {
     ARM_CPU_TYPE_NAME("cortex-a53"),
     ARM_CPU_TYPE_NAME("cortex-a57"),
     ARM_CPU_TYPE_NAME("cortex-a72"),
+    ARM_CPU_TYPE_NAME("cortex-a76"),
     ARM_CPU_TYPE_NAME("a64fx"),
     ARM_CPU_TYPE_NAME("host"),
     ARM_CPU_TYPE_NAME("max"),
diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu64.c
+++ b/target/arm/cpu64.c
@@ -XXX,XX +XXX,XX @@ static void aarch64_a72_initfn(Object *obj)
     define_cortex_a72_a57_a53_cp_reginfo(cpu);
 }
 
+static void aarch64_a76_initfn(Object *obj)
+{
+    ARMCPU *cpu = ARM_CPU(obj);
+
+    cpu->dtb_compatible = "arm,cortex-a76";
+    set_feature(&cpu->env, ARM_FEATURE_V8);
+    set_feature(&cpu->env, ARM_FEATURE_NEON);
+    set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER);
+    set_feature(&cpu->env, ARM_FEATURE_AARCH64);
+    set_feature(&cpu->env, ARM_FEATURE_CBAR_RO);
+    set_feature(&cpu->env, ARM_FEATURE_EL2);
+    set_feature(&cpu->env, ARM_FEATURE_EL3);
+    set_feature(&cpu->env, ARM_FEATURE_PMU);
+
+    /* Ordered by B2.4 AArch64 registers by functional group */
+    cpu->clidr = 0x82000023;
+    cpu->ctr = 0x8444C004;
+    cpu->dcz_blocksize = 4;
+    cpu->isar.id_aa64dfr0  = 0x0000000010305408ull;
+    cpu->isar.id_aa64isar0 = 0x0000100010211120ull;
+    cpu->isar.id_aa64isar1 = 0x0000000000100001ull;
+    cpu->isar.id_aa64mmfr0 = 0x0000000000101122ull;
+    cpu->isar.id_aa64mmfr1 = 0x0000000010212122ull;
+    cpu->isar.id_aa64mmfr2 = 0x0000000000001011ull;
+    cpu->isar.id_aa64pfr0  = 0x1100000010111112ull; /* GIC filled in later */
+    cpu->isar.id_aa64pfr1  = 0x0000000000000010ull;
+    cpu->id_afr0       = 0x00000000;
+    cpu->isar.id_dfr0  = 0x04010088;
+    cpu->isar.id_isar0 = 0x02101110;
+    cpu->isar.id_isar1 = 0x13112111;
+    cpu->isar.id_isar2 = 0x21232042;
+    cpu->isar.id_isar3 = 0x01112131;
+    cpu->isar.id_isar4 = 0x00010142;
+    cpu->isar.id_isar5 = 0x01011121;
+    cpu->isar.id_isar6 = 0x00000010;
+    cpu->isar.id_mmfr0 = 0x10201105;
+    cpu->isar.id_mmfr1 = 0x40000000;
+    cpu->isar.id_mmfr2 = 0x01260000;
+    cpu->isar.id_mmfr3 = 0x02122211;
+    cpu->isar.id_mmfr4 = 0x00021110;
+    cpu->isar.id_pfr0  = 0x10010131;
+    cpu->isar.id_pfr1  = 0x00010000; /* GIC filled in later */
+    cpu->isar.id_pfr2  = 0x00000011;
+    cpu->midr = 0x414fd0b1;          /* r4p1 */
+    cpu->revidr = 0;
+
+    /* From B2.18 CCSIDR_EL1 */
+    cpu->ccsidr[0] = 0x701fe01a; /* 64KB L1 dcache */
+    cpu->ccsidr[1] = 0x201fe01a; /* 64KB L1 icache */
+    cpu->ccsidr[2] = 0x707fe03a; /* 512KB L2 cache */
+
+    /* From B2.93 SCTLR_EL3 */
+    cpu->reset_sctlr = 0x30c50838;
+
+    /* From B4.23 ICH_VTR_EL2 */
+    cpu->gic_num_lrs = 4;
+    cpu->gic_vpribits = 5;
+    cpu->gic_vprebits = 5;
+
+    /* From B5.1 AdvSIMD AArch64 register summary */
+    cpu->isar.mvfr0 = 0x10110222;
+    cpu->isar.mvfr1 = 0x13211111;
+    cpu->isar.mvfr2 = 0x00000043;
+}
+
 void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp)
 {
     /*
@@ -XXX,XX +XXX,XX @@ static const ARMCPUInfo aarch64_cpus[] = {
     { .name = "cortex-a57",         .initfn = aarch64_a57_initfn },
     { .name = "cortex-a53",         .initfn = aarch64_a53_initfn },
     { .name = "cortex-a72",         .initfn = aarch64_a72_initfn },
+    { .name = "cortex-a76",         .initfn = aarch64_a76_initfn },
     { .name = "a64fx",              .initfn = aarch64_a64fx_initfn },
     { .name = "max",                .initfn = aarch64_max_initfn },
 #if defined(CONFIG_KVM) || defined(CONFIG_HVF)
-- 
2.25.1

From: Richard Henderson <richard.henderson@linaro.org>

Enable the n1 for virt and sbsa board use.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-25-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 docs/system/arm/virt.rst |  1 +
 hw/arm/sbsa-ref.c        |  1 +
 hw/arm/virt.c            |  1 +
 target/arm/cpu64.c       | 66 ++++++++++++++++++++++++++++++++++++++++
 4 files changed, 69 insertions(+)

diff --git a/docs/system/arm/virt.rst b/docs/system/arm/virt.rst
index XXXXXXX..XXXXXXX 100644
--- a/docs/system/arm/virt.rst
+++ b/docs/system/arm/virt.rst
@@ -XXX,XX +XXX,XX @@ Supported guest CPU types:
 - ``cortex-a76`` (64-bit)
 - ``a64fx`` (64-bit)
 - ``host`` (with KVM only)
+- ``neoverse-n1`` (64-bit)
 - ``max`` (same as ``host`` for KVM; best possible emulation with TCG)
 
 Note that the default is ``cortex-a15``, so for an AArch64 guest you must
diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/sbsa-ref.c
+++ b/hw/arm/sbsa-ref.c
@@ -XXX,XX +XXX,XX @@ static const char * const valid_cpus[] = {
     ARM_CPU_TYPE_NAME("cortex-a57"),
     ARM_CPU_TYPE_NAME("cortex-a72"),
     ARM_CPU_TYPE_NAME("cortex-a76"),
+    ARM_CPU_TYPE_NAME("neoverse-n1"),
     ARM_CPU_TYPE_NAME("max"),
 };
 
diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -XXX,XX +XXX,XX @@ static const char *valid_cpus[] = {
     ARM_CPU_TYPE_NAME("cortex-a72"),
     ARM_CPU_TYPE_NAME("cortex-a76"),
     ARM_CPU_TYPE_NAME("a64fx"),
+    ARM_CPU_TYPE_NAME("neoverse-n1"),
     ARM_CPU_TYPE_NAME("host"),
     ARM_CPU_TYPE_NAME("max"),
 };
diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu64.c
+++ b/target/arm/cpu64.c
@@ -XXX,XX +XXX,XX @@ static void aarch64_a76_initfn(Object *obj)
     cpu->isar.mvfr2 = 0x00000043;
 }
 
+static void aarch64_neoverse_n1_initfn(Object *obj)
+{
+    ARMCPU *cpu = ARM_CPU(obj);
+
+    cpu->dtb_compatible = "arm,neoverse-n1";
+    set_feature(&cpu->env, ARM_FEATURE_V8);
+    set_feature(&cpu->env, ARM_FEATURE_NEON);
+    set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER);
+    set_feature(&cpu->env, ARM_FEATURE_AARCH64);
+    set_feature(&cpu->env, ARM_FEATURE_CBAR_RO);
+    set_feature(&cpu->env, ARM_FEATURE_EL2);
+    set_feature(&cpu->env, ARM_FEATURE_EL3);
+    set_feature(&cpu->env, ARM_FEATURE_PMU);
+
+    /* Ordered by B2.4 AArch64 registers by functional group */
+    cpu->clidr = 0x82000023;
+    cpu->ctr = 0x8444c004;
+    cpu->dcz_blocksize = 4;
+    cpu->isar.id_aa64dfr0  = 0x0000000110305408ull;
+    cpu->isar.id_aa64isar0 = 0x0000100010211120ull;
+    cpu->isar.id_aa64isar1 = 0x0000000000100001ull;
+    cpu->isar.id_aa64mmfr0 = 0x0000000000101125ull;
+    cpu->isar.id_aa64mmfr1 = 0x0000000010212122ull;
+    cpu->isar.id_aa64mmfr2 = 0x0000000000001011ull;
+    cpu->isar.id_aa64pfr0  = 0x1100000010111112ull; /* GIC filled in later */
+    cpu->isar.id_aa64pfr1  = 0x0000000000000020ull;
+    cpu->id_afr0       = 0x00000000;
+    cpu->isar.id_dfr0  = 0x04010088;
+    cpu->isar.id_isar0 = 0x02101110;
+    cpu->isar.id_isar1 = 0x13112111;
+    cpu->isar.id_isar2 = 0x21232042;
+    cpu->isar.id_isar3 = 0x01112131;
+    cpu->isar.id_isar4 = 0x00010142;
+    cpu->isar.id_isar5 = 0x01011121;
+    cpu->isar.id_isar6 = 0x00000010;
+    cpu->isar.id_mmfr0 = 0x10201105;
+    cpu->isar.id_mmfr1 = 0x40000000;
+    cpu->isar.id_mmfr2 = 0x01260000;
+    cpu->isar.id_mmfr3 = 0x02122211;
+    cpu->isar.id_mmfr4 = 0x00021110;
+    cpu->isar.id_pfr0  = 0x10010131;
+    cpu->isar.id_pfr1  = 0x00010000; /* GIC filled in later */
+    cpu->isar.id_pfr2  = 0x00000011;
+    cpu->midr = 0x414fd0c1;          /* r4p1 */
+    cpu->revidr = 0;
+
+    /* From B2.23 CCSIDR_EL1 */
+    cpu->ccsidr[0] = 0x701fe01a; /* 64KB L1 dcache */
+    cpu->ccsidr[1] = 0x201fe01a; /* 64KB L1 icache */
+    cpu->ccsidr[2] = 0x70ffe03a; /* 1MB L2 cache */
+
+    /* From B2.98 SCTLR_EL3 */
+    cpu->reset_sctlr = 0x30c50838;
+
+    /* From B4.23 ICH_VTR_EL2 */
+    cpu->gic_num_lrs = 4;
+    cpu->gic_vpribits = 5;
+    cpu->gic_vprebits = 5;
+
+    /* From B5.1 AdvSIMD AArch64 register summary */
+    cpu->isar.mvfr0 = 0x10110222;
+    cpu->isar.mvfr1 = 0x13211111;
+    cpu->isar.mvfr2 = 0x00000043;
+}
+
 void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp)
 {
     /*
@@ -XXX,XX +XXX,XX @@ static const ARMCPUInfo aarch64_cpus[] = {
     { .name = "cortex-a72",         .initfn = aarch64_a72_initfn },
     { .name = "cortex-a76",         .initfn = aarch64_a76_initfn },
     { .name = "a64fx",              .initfn = aarch64_a64fx_initfn },
+    { .name = "neoverse-n1",        .initfn = aarch64_neoverse_n1_initfn },
     { .name = "max",                .initfn = aarch64_max_initfn },
 #if defined(CONFIG_KVM) || defined(CONFIG_HVF)
     { .name = "host",               .initfn = aarch64_host_initfn },
-- 
2.25.1

From: Leif Lindholm <quic_llindhol@quicinc.com>

The sbsa-ref machine is continuously evolving. Some of the changes we
want to make in the near future, to align with real components (e.g.
the GIC-700), will break compatibility for existing firmware.

Introduce two new properties to the DT generated on machine generation:
- machine-version-major
  To be incremented when a platform change makes the machine
  incompatible with existing firmware.
- machine-version-minor
  To be incremented when functionality is added to the machine
  without causing incompatibility with existing firmware.
  to be reset to 0 when machine-version-major is incremented.

This versioning scheme is *neither*:
- A QEMU versioned machine type; a given version of QEMU will emulate
  a given version of the platform.
- A reflection of level of SBSA (now SystemReady SR) support provided.

The version will increment on guest-visible functional changes only,
akin to a revision ID register found on a physical platform.

These properties are both introduced with the value 0.
(Hence, a machine where the DT is lacking these nodes is equivalent
to version 0.0.)

Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com>
Message-id: 20220505113947.75714-1-quic_llindhol@quicinc.com
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Radoslaw Biernacki <rad@semihalf.com>
Cc: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/sbsa-ref.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/sbsa-ref.c
+++ b/hw/arm/sbsa-ref.c
@@ -XXX,XX +XXX,XX @@ static void create_fdt(SBSAMachineState *sms)
     qemu_fdt_setprop_cell(fdt, "/", "#address-cells", 0x2);
     qemu_fdt_setprop_cell(fdt, "/", "#size-cells", 0x2);
 
+    /*
+     * This versioning scheme is for informing platform fw only. It is neither:
+     * - A QEMU versioned machine type; a given version of QEMU will emulate
+     *   a given version of the platform.
+     * - A reflection of level of SBSA (now SystemReady SR) support provided.
+     *
+     * machine-version-major: updated when changes breaking fw compatibility
+     *                        are introduced.
+     * machine-version-minor: updated when features are added that don't break
+     *                        fw compatibility.
+     */
+    qemu_fdt_setprop_cell(fdt, "/", "machine-version-major", 0);
+    qemu_fdt_setprop_cell(fdt, "/", "machine-version-minor", 0);
+
     if (ms->numa_state->have_numa_distance) {
         int size = nb_numa_nodes * nb_numa_nodes * 3 * sizeof(uint32_t);
         uint32_t *matrix = g_malloc0(size);
-- 
2.25.1

From: Gavin Shan <gshan@redhat.com>

This adds cluster-id in CPU instance properties, which will be used
by arm/virt machine. Besides, the cluster-id is also verified or
dumped in various spots:

* hw/core/machine.c::machine_set_cpu_numa_node() to associate
    CPU with its NUMA node.

* hw/core/machine.c::machine_numa_finish_cpu_init() to record
    CPU slots with no NUMA mapping set.

* hw/core/machine-hmp-cmds.c::hmp_hotpluggable_cpus() to dump
    cluster-id.

Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20220503140304.855514-2-gshan@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 qapi/machine.json          |  6 ++++--
 hw/core/machine-hmp-cmds.c |  4 ++++
 hw/core/machine.c          | 16 ++++++++++++++++
 3 files changed, 24 insertions(+), 2 deletions(-)

diff --git a/qapi/machine.json b/qapi/machine.json
index XXXXXXX..XXXXXXX 100644
--- a/qapi/machine.json
+++ b/qapi/machine.json
@@ -XXX,XX +XXX,XX @@
 # @node-id: NUMA node ID the CPU belongs to
 # @socket-id: socket number within node/board the CPU belongs to
 # @die-id: die number within socket the CPU belongs to (since 4.1)
-# @core-id: core number within die the CPU belongs to
+# @cluster-id: cluster number within die the CPU belongs to (since 7.1)
+# @core-id: core number within cluster the CPU belongs to
 # @thread-id: thread number within core the CPU belongs to
 #
-# Note: currently there are 5 properties that could be present
+# Note: currently there are 6 properties that could be present
 #       but management should be prepared to pass through other
 #       properties with device_add command to allow for future
 #       interface extension. This also requires the filed names to be kept in
@@ -XXX,XX +XXX,XX @@
   'data': { '*node-id': 'int',
             '*socket-id': 'int',
             '*die-id': 'int',
+            '*cluster-id': 'int',
             '*core-id': 'int',
             '*thread-id': 'int'
   }
diff --git a/hw/core/machine-hmp-cmds.c b/hw/core/machine-hmp-cmds.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/core/machine-hmp-cmds.c
+++ b/hw/core/machine-hmp-cmds.c
@@ -XXX,XX +XXX,XX @@ void hmp_hotpluggable_cpus(Monitor *mon, const QDict *qdict)
         if (c->has_die_id) {
             monitor_printf(mon, "    die-id: \"%" PRIu64 "\"\n", c->die_id);
         }
+        if (c->has_cluster_id) {
+            monitor_printf(mon, "    cluster-id: \"%" PRIu64 "\"\n",
+                           c->cluster_id);
+        }
         if (c->has_core_id) {
             monitor_printf(mon, "    core-id: \"%" PRIu64 "\"\n", c->core_id);
         }
diff --git a/hw/core/machine.c b/hw/core/machine.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/core/machine.c
+++ b/hw/core/machine.c
@@ -XXX,XX +XXX,XX @@ void machine_set_cpu_numa_node(MachineState *machine,
             return;
         }
 
+        if (props->has_cluster_id && !slot->props.has_cluster_id) {
+            error_setg(errp, "cluster-id is not supported");
+            return;
+        }
+
         if (props->has_socket_id && !slot->props.has_socket_id) {
             error_setg(errp, "socket-id is not supported");
             return;
@@ -XXX,XX +XXX,XX @@ void machine_set_cpu_numa_node(MachineState *machine,
                 continue;
         }
 
+        if (props->has_cluster_id &&
+            props->cluster_id != slot->props.cluster_id) {
+                continue;
+        }
+
         if (props->has_die_id && props->die_id != slot->props.die_id) {
                 continue;
         }
@@ -XXX,XX +XXX,XX @@ static char *cpu_slot_to_string(const CPUArchId *cpu)
         }
         g_string_append_printf(s, "die-id: %"PRId64, cpu->props.die_id);
     }
+    if (cpu->props.has_cluster_id) {
+        if (s->len) {
+            g_string_append_printf(s, ", ");
+        }
+        g_string_append_printf(s, "cluster-id: %"PRId64, cpu->props.cluster_id);
+    }
     if (cpu->props.has_core_id) {
         if (s->len) {
             g_string_append_printf(s, ", ");
-- 
2.25.1

From: Gavin Shan <gshan@redhat.com>

The CPU topology isn't enabled on arm/virt machine yet, but we're
going to do it in next patch. After the CPU topology is enabled by
next patch, "thread-id=1" becomes invalid because the CPU core is
preferred on arm/virt machine. It means these two CPUs have 0/1
as their core IDs, but their thread IDs are all 0. It will trigger
test failure as the following message indicates:

[14/21 qemu:qtest+qtest-aarch64 / qtest-aarch64/numa-test  ERROR
  1.48s   killed by signal 6 SIGABRT
  >>> G_TEST_DBUS_DAEMON=/home/gavin/sandbox/qemu.main/tests/dbus-vmstate-daemon.sh \
      QTEST_QEMU_STORAGE_DAEMON_BINARY=./storage-daemon/qemu-storage-daemon         \
      QTEST_QEMU_BINARY=./qemu-system-aarch64                                       \
      QTEST_QEMU_IMG=./qemu-img MALLOC_PERTURB_=83                                  \
      /home/gavin/sandbox/qemu.main/build/tests/qtest/numa-test --tap -k
  ――――――――――――――――――――――――――――――――――――――――――――――
  stderr:
  qemu-system-aarch64: -numa cpu,node-id=0,thread-id=1: no match found

This fixes the issue by providing comprehensive SMP configurations
in aarch64_numa_cpu(). The SMP configurations aren't used before
the CPU topology is enabled in next patch.

Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Message-id: 20220503140304.855514-3-gshan@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 tests/qtest/numa-test.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

From: Gavin Shan <gshan@redhat.com>

Currently, the SMP configuration isn't considered when the CPU
topology is populated. In this case, it's impossible to provide
the default CPU-to-NUMA mapping or association based on the socket
ID of the given CPU.

This takes account of SMP configuration when the CPU topology
is populated. The die ID for the given CPU isn't assigned since
it's not supported on arm/virt machine. Besides, the used SMP
configuration in qtest/numa-test/aarch64_numa_cpu() is corrcted
to avoid testing failure

Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20220503140304.855514-4-gshan@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/virt.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -XXX,XX +XXX,XX @@ static const CPUArchIdList *virt_possible_cpu_arch_ids(MachineState *ms)
     int n;
     unsigned int max_cpus = ms->smp.max_cpus;
     VirtMachineState *vms = VIRT_MACHINE(ms);
+    MachineClass *mc = MACHINE_GET_CLASS(vms);
 
     if (ms->possible_cpus) {
         assert(ms->possible_cpus->len == max_cpus);
@@ -XXX,XX +XXX,XX @@ static const CPUArchIdList *virt_possible_cpu_arch_ids(MachineState *ms)
         ms->possible_cpus->cpus[n].type = ms->cpu_type;
         ms->possible_cpus->cpus[n].arch_id =
             virt_cpu_mp_affinity(vms, n);
+
+        assert(!mc->smp_props.dies_supported);
+        ms->possible_cpus->cpus[n].props.has_socket_id = true;
+        ms->possible_cpus->cpus[n].props.socket_id =
+            n / (ms->smp.clusters * ms->smp.cores * ms->smp.threads);
+        ms->possible_cpus->cpus[n].props.has_cluster_id = true;
+        ms->possible_cpus->cpus[n].props.cluster_id =
+            (n / (ms->smp.cores * ms->smp.threads)) % ms->smp.clusters;
+        ms->possible_cpus->cpus[n].props.has_core_id = true;
+        ms->possible_cpus->cpus[n].props.core_id =
+            (n / ms->smp.threads) % ms->smp.cores;
         ms->possible_cpus->cpus[n].props.has_thread_id = true;
-        ms->possible_cpus->cpus[n].props.thread_id = n;
+        ms->possible_cpus->cpus[n].props.thread_id =
+            n % ms->smp.threads;
     }
     return ms->possible_cpus;
 }
-- 
2.25.1

From: Gavin Shan <gshan@redhat.com>

In aarch64_numa_cpu(), the CPU and NUMA association is something
like below. Two threads in the same core/cluster/socket are
associated with two individual NUMA nodes, which is unreal as
Igor Mammedov mentioned. We don't expect the association to break
NUMA-to-socket boundary, which matches with the real world.

NUMA-node  socket  cluster   core   thread
    ------------------------------------------
        0       0        0        0      0
        1       0        0        0      1

This corrects the topology for CPUs and their association with
NUMA nodes. After this patch is applied, the CPU and NUMA
association becomes something like below, which looks real.
Besides, socket/cluster/core/thread IDs are all checked when
the NUMA node IDs are verified. It helps to check if the CPU
topology is properly populated or not.

NUMA-node  socket  cluster   core   thread
    ------------------------------------------
       0        1        0        0       0
       1        0        0        0       0

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20220503140304.855514-5-gshan@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 tests/qtest/numa-test.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/tests/qtest/numa-test.c b/tests/qtest/numa-test.c
index XXXXXXX..XXXXXXX 100644
--- a/tests/qtest/numa-test.c
+++ b/tests/qtest/numa-test.c
@@ -XXX,XX +XXX,XX @@ static void aarch64_numa_cpu(const void *data)
     g_autofree char *cli = NULL;
 
     cli = make_cli(data, "-machine "
-        "smp.cpus=2,smp.sockets=1,smp.clusters=1,smp.cores=1,smp.threads=2 "
+        "smp.cpus=2,smp.sockets=2,smp.clusters=1,smp.cores=1,smp.threads=1 "
         "-numa node,nodeid=0,memdev=ram -numa node,nodeid=1 "
-        "-numa cpu,node-id=1,thread-id=0 "
-        "-numa cpu,node-id=0,thread-id=1");
+        "-numa cpu,node-id=0,socket-id=1,cluster-id=0,core-id=0,thread-id=0 "
+        "-numa cpu,node-id=1,socket-id=0,cluster-id=0,core-id=0,thread-id=0");
     qts = qtest_init(cli);
     cpus = get_cpus(qts, &resp);
     g_assert(cpus);
 
     while ((e = qlist_pop(cpus))) {
         QDict *cpu, *props;
-        int64_t thread, node;
+        int64_t socket, cluster, core, thread, node;
 
         cpu = qobject_to(QDict, e);
         g_assert(qdict_haskey(cpu, "props"));
@@ -XXX,XX +XXX,XX @@ static void aarch64_numa_cpu(const void *data)
 
         g_assert(qdict_haskey(props, "node-id"));
         node = qdict_get_int(props, "node-id");
+        g_assert(qdict_haskey(props, "socket-id"));
+        socket = qdict_get_int(props, "socket-id");
+        g_assert(qdict_haskey(props, "cluster-id"));
+        cluster = qdict_get_int(props, "cluster-id");
+        g_assert(qdict_haskey(props, "core-id"));
+        core = qdict_get_int(props, "core-id");
         g_assert(qdict_haskey(props, "thread-id"));
         thread = qdict_get_int(props, "thread-id");
 
-        if (thread == 0) {
+        if (socket == 0 && cluster == 0 && core == 0 && thread == 0) {
             g_assert_cmpint(node, ==, 1);
-        } else if (thread == 1) {
+        } else if (socket == 1 && cluster == 0 && core == 0 && thread == 0) {
             g_assert_cmpint(node, ==, 0);
         } else {
             g_assert(false);
-- 
2.25.1

From: Gavin Shan <gshan@redhat.com>

When CPU-to-NUMA association isn't explicitly provided by users,
the default one is given by mc->get_default_cpu_node_id(). However,
the CPU topology isn't fully considered in the default association
and this causes CPU topology broken warnings on booting Linux guest.

For example, the following warning messages are observed when the
Linux guest is booted with the following command lines.

/home/gavin/sandbox/qemu.main/build/qemu-system-aarch64 \
  -accel kvm -machine virt,gic-version=host               \
  -cpu host                                               \
  -smp 6,sockets=2,cores=3,threads=1                      \
  -m 1024M,slots=16,maxmem=64G                            \
  -object memory-backend-ram,id=mem0,size=128M            \
  -object memory-backend-ram,id=mem1,size=128M            \
  -object memory-backend-ram,id=mem2,size=128M            \
  -object memory-backend-ram,id=mem3,size=128M            \
  -object memory-backend-ram,id=mem4,size=128M            \
  -object memory-backend-ram,id=mem4,size=384M            \
  -numa node,nodeid=0,memdev=mem0                         \
  -numa node,nodeid=1,memdev=mem1                         \
  -numa node,nodeid=2,memdev=mem2                         \
  -numa node,nodeid=3,memdev=mem3                         \
  -numa node,nodeid=4,memdev=mem4                         \
  -numa node,nodeid=5,memdev=mem5
         :
  alternatives: patching kernel code
  BUG: arch topology borken
  the CLS domain not a subset of the MC domain
  <the above error log repeats>
  BUG: arch topology borken
  the DIE domain not a subset of the NODE domain

With current implementation of mc->get_default_cpu_node_id(),
CPU#0 to CPU#5 are associated with NODE#0 to NODE#5 separately.
That's incorrect because CPU#0/1/2 should be associated with same
NUMA node because they're seated in same socket.

This fixes the issue by considering the socket ID when the default
CPU-to-NUMA association is provided in virt_possible_cpu_arch_ids().
With this applied, no more CPU topology broken warnings are seen
from the Linux guest. The 6 CPUs are associated with NODE#0/1, but
there are no CPUs associated with NODE#2/3/4/5.

Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Message-id: 20220503140304.855514-6-gshan@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/virt.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -XXX,XX +XXX,XX @@ virt_cpu_index_to_props(MachineState *ms, unsigned cpu_index)
 
 static int64_t virt_get_default_cpu_node_id(const MachineState *ms, int idx)
 {
-    return idx % ms->numa_state->num_nodes;
+    int64_t socket_id = ms->possible_cpus->cpus[idx].props.socket_id;
+
+    return socket_id % ms->numa_state->num_nodes;
 }
 
 static const CPUArchIdList *virt_possible_cpu_arch_ids(MachineState *ms)
-- 
2.25.1

From: Gavin Shan <gshan@redhat.com>

When the PPTT table is built, the CPU topology is re-calculated, but
it's unecessary because the CPU topology has been populated in
virt_possible_cpu_arch_ids() on arm/virt machine.

This reworks build_pptt() to avoid by reusing the existing IDs in
ms->possible_cpus. Currently, the only user of build_pptt() is
arm/virt machine.

Signed-off-by: Gavin Shan <gshan@redhat.com>
Tested-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20220503140304.855514-7-gshan@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/acpi/aml-build.c | 111 +++++++++++++++++++-------------------------
 1 file changed, 48 insertions(+), 63 deletions(-)

diff --git a/hw/acpi/aml-build.c b/hw/acpi/aml-build.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/acpi/aml-build.c
+++ b/hw/acpi/aml-build.c
@@ -XXX,XX +XXX,XX @@ void build_pptt(GArray *table_data, BIOSLinker *linker, MachineState *ms,
                 const char *oem_id, const char *oem_table_id)
 {
     MachineClass *mc = MACHINE_GET_CLASS(ms);
-    GQueue *list = g_queue_new();
-    guint pptt_start = table_data->len;
-    guint parent_offset;
-    guint length, i;
-    int uid = 0;
-    int socket;
+    CPUArchIdList *cpus = ms->possible_cpus;
+    int64_t socket_id = -1, cluster_id = -1, core_id = -1;
+    uint32_t socket_offset = 0, cluster_offset = 0, core_offset = 0;
+    uint32_t pptt_start = table_data->len;
+    int n;
     AcpiTable table = { .sig = "PPTT", .rev = 2,
                         .oem_id = oem_id, .oem_table_id = oem_table_id };
 
     acpi_table_begin(&table, table_data);
 
-    for (socket = 0; socket < ms->smp.sockets; socket++) {
-        g_queue_push_tail(list,
-            GUINT_TO_POINTER(table_data->len - pptt_start));
-        build_processor_hierarchy_node(
-            table_data,
-            /*
-             * Physical package - represents the boundary
-             * of a physical package
-             */
-            (1 << 0),
-            0, socket, NULL, 0);
-    }
-
-    if (mc->smp_props.clusters_supported) {
-        length = g_queue_get_length(list);
-        for (i = 0; i < length; i++) {
-            int cluster;
-
-            parent_offset = GPOINTER_TO_UINT(g_queue_pop_head(list));
-            for (cluster = 0; cluster < ms->smp.clusters; cluster++) {
-                g_queue_push_tail(list,
-                    GUINT_TO_POINTER(table_data->len - pptt_start));
-                build_processor_hierarchy_node(
-                    table_data,
-                    (0 << 0), /* not a physical package */
-                    parent_offset, cluster, NULL, 0);
-            }
+    /*
+     * This works with the assumption that cpus[n].props.*_id has been
+     * sorted from top to down levels in mc->possible_cpu_arch_ids().
+     * Otherwise, the unexpected and duplicated containers will be
+     * created.
+     */
+    for (n = 0; n < cpus->len; n++) {
+        if (cpus->cpus[n].props.socket_id != socket_id) {
+            assert(cpus->cpus[n].props.socket_id > socket_id);
+            socket_id = cpus->cpus[n].props.socket_id;
+            cluster_id = -1;
+            core_id = -1;
+            socket_offset = table_data->len - pptt_start;
+            build_processor_hierarchy_node(table_data,
+                (1 << 0), /* Physical package */
+                0, socket_id, NULL, 0);
         }
-    }
 
-    length = g_queue_get_length(list);
-    for (i = 0; i < length; i++) {
-        int core;
-
-        parent_offset = GPOINTER_TO_UINT(g_queue_pop_head(list));
-        for (core = 0; core < ms->smp.cores; core++) {
-            if (ms->smp.threads > 1) {
-                g_queue_push_tail(list,
-                    GUINT_TO_POINTER(table_data->len - pptt_start));
-                build_processor_hierarchy_node(
-                    table_data,
-                    (0 << 0), /* not a physical package */
-                    parent_offset, core, NULL, 0);
-            } else {
-                build_processor_hierarchy_node(
-                    table_data,
-                    (1 << 1) | /* ACPI Processor ID valid */
-                    (1 << 3),  /* Node is a Leaf */
-                    parent_offset, uid++, NULL, 0);
+        if (mc->smp_props.clusters_supported) {
+            if (cpus->cpus[n].props.cluster_id != cluster_id) {
+                assert(cpus->cpus[n].props.cluster_id > cluster_id);
+                cluster_id = cpus->cpus[n].props.cluster_id;
+                core_id = -1;
+                cluster_offset = table_data->len - pptt_start;
+                build_processor_hierarchy_node(table_data,
+                    (0 << 0), /* Not a physical package */
+                    socket_offset, cluster_id, NULL, 0);
             }
+        } else {
+            cluster_offset = socket_offset;
         }
-    }
 
-    length = g_queue_get_length(list);
-    for (i = 0; i < length; i++) {
-        int thread;
+        if (ms->smp.threads == 1) {
+            build_processor_hierarchy_node(table_data,
+                (1 << 1) | /* ACPI Processor ID valid */
+                (1 << 3),  /* Node is a Leaf */
+                cluster_offset, n, NULL, 0);
+        } else {
+            if (cpus->cpus[n].props.core_id != core_id) {
+                assert(cpus->cpus[n].props.core_id > core_id);
+                core_id = cpus->cpus[n].props.core_id;
+                core_offset = table_data->len - pptt_start;
+                build_processor_hierarchy_node(table_data,
+                    (0 << 0), /* Not a physical package */
+                    cluster_offset, core_id, NULL, 0);
+            }
 
-        parent_offset = GPOINTER_TO_UINT(g_queue_pop_head(list));
-        for (thread = 0; thread < ms->smp.threads; thread++) {
-            build_processor_hierarchy_node(
-                table_data,
+            build_processor_hierarchy_node(table_data,
                 (1 << 1) | /* ACPI Processor ID valid */
                 (1 << 2) | /* Processor is a Thread */
                 (1 << 3),  /* Node is a Leaf */
-                parent_offset, uid++, NULL, 0);
+                core_offset, n, NULL, 0);
         }
     }
 
-    g_queue_free(list);
     acpi_table_end(linker, &table);
 }
 
-- 
2.25.1

Hi; here's another arm pullreq; main parts here are the
new i.MX 8MM EVK board, and a lot of refactoring.

thanks
-- PMM

The following changes since commit aa15257174da180c6a8a9d58f87319cfe61c5520:

Merge tag 'pbouvier/pr/plugins-20260424' of https://gitlab.com/p-b-o/qemu into staging (2026-04-25 10:22:04 -0400)

are available in the Git repository at:

https://gitlab.com/pm215/qemu.git tags/pull-target-arm-20260427

for you to fetch changes up to 4575da5ecb7a27544aa6da1f78e700e8100ceaea:

target/arm: report register in WFIT syndromes (2026-04-27 11:46:34 +0100)

----------------------------------------------------------------
target-arm queue:
docs/system: add FEAT_AA32 and FEAT_AA64 to emulation list
hw/arm: Add the i.MX 8MM EVK(Evaluation Kit) board
target/arm: Build M-profile helper code once only
hw/arm: Remove hw_error() for the unimplemented CM_LMBUSCNT register
hw: Move ARM_SYSCTL_GPIO definitions to arm sysctl specific header
target/arm: Allow 'aarch64=off' to be set for TCG CPUs
target/arm: Allow some sysregs to not have to be an exact match for migration
hw/arm/raspi4b: NOP all DTB nodes when removing unimplemented devices
hw/arm/fsl-imx6ul: Implement LCDIF display device
target/arm: Refactor syndrome value code to use registerfields
target/arm: Report the register in WFxT syndromes

----------------------------------------------------------------
Alex Bennée (24):
      docs/system: add FEAT_AA32 and FEAT_AA64 to emulation list
      target/arm: migrate basic syndrome helpers to registerfields
      target/arm: migrate system/cp trap syndromes to registerfields
      target/arm: migrate FP/SIMD trap syndromes to registerfields
      target/arm: migrate eret trap syndromes to registerfields
      target/arm: migrate SME trap syndromes to registerfields
      target/arm: migrate PAC trap syndromes to registerfields
      target/arm: migrate BTI trap syndromes to registerfields
      target/arm: migrate BXJ trap syndromes to registerfields
      target/arm: migrate Granule Protection traps to registerfields
      target/arm: migrate fault syndromes to registerfields
      target/arm: migrate debug syndromes to registerfields
      target/arm: migrate wfx syndromes to registerfields
      target/arm: migrate gcs syndromes to registerfields
      target/arm: migrate memory op syndromes to registerfields
      target/arm: migrate check_hcr_el2_trap to use syndrome helper
      target/arm: use syndrome helpers in arm_cpu_do_interrupt_aarch32_hyp
      target/arm: use syndrome helpers to set SAME_EL EC bit
      target/arm: make whpx use syndrome helpers for decode
      target/arm: make hvf use syndrome helpers for decode
      target/arm: use syndrome helpers in merge_syn_data_abort
      target/arm: use syndrome helpers to query VNCR bit
      target/arm: remove old syndrome defines
      target/arm: report register in WFIT syndromes

Eric Auger (7):
      target/arm/cpu: Introduce the infrastructure for cpreg migration tolerances
      target/arm/machine: Handle ToleranceNotOnBothEnds migration tolerances
      target/arm/machine: Handle ToleranceOnlySrcTestValue migration tolerance
      target/arm/cpu64: Mitigate migration failures due to spurious TCR_EL1, PIRE0_EL1 and PIR_EL1
      target/arm/cpu64: Define cpreg migration tolerance for KVM_REG_ARM_VENDOR_HYP_BMAP_2
      target/arm/helper: Define cpreg migration tolerance for DGBDTR_EL0
      Revert "target/arm: Reinstate bogus AArch32 DBGDTRTX register for migration compat"

Gaurav Sharma (15):
      hw/arm: Add the i.MX 8MM EVK(Evaluation Kit) board
      hw/misc/imx8mp_analog: Add property to analog device
      hw/arm/fsl-imx8mm: Add Analog device IP to iMX8MM SOC
      hw/arm/fsl-imx8mm: Add Clock Control Module IP to iMX8MM
      hw/arm/fsl-imx8mm: Implemented support for SNVS
      hw/arm/fsl-imx8mm: Adding support for USDHC storage controllers
      hw/arm/fsl-imx8mm: Add PCIe support
      hw/arm/fsl-imx8mm: Add GPIO controllers
      hw/arm/fsl-imx8mm: Adding support for I2C emulation
      hw/arm/fsl-imx8mm: Adding support for SPI controller
      hw/arm/fsl-imx8mm: Adding support for Watchdog Timers
      hw/arm/fsl-imx8mm: Adding support for General Purpose Timers
      hw/arm/fsl-imx8mm: Adding support for ENET ethernet controller
      hw/arm/fsl-imx8mm: Adding support for USB controller
      hw/arm/fsl-imx8mm: Adding functional testing of iMX8MM emulation

Osama Abdelkader (1):
      hw/arm/raspi4b: NOP all DTB nodes when removing unimplemented devices

Peter Maydell (4):
      hw: Move ARM_SYSCTL_GPIO definitions to arm sysctl specific header
      target/arm: Clear AArch64 ID regs from ARMISARegisters if AArch64 disabled
      target/arm: Allow 'aarch64=off' to be set for TCG CPUs
      tests/functional/aarch64: Add basic test of TCG aarch64=off

Philippe Mathieu-Daudé (9):
      target/arm: Ignore endianness when setting MTE tags
      target/arm: Explode MO_TExx -> MO_TE | MO_xx
      target/arm: Hoist MO_TE into mve_advance_vpt()
      target/arm: Hoist MO_TE into MVE DO_VSTR() macro
      target/arm: Introduce mo_endian() helper
      target/arm: Replace MO_TE -> mo_endian() for MVE helpers
      target/arm: Compile mve_helper.c once
      target/arm: Replace MO_TE -> mo_endian() for Cortex-M helpers
      target/arm: Compile m_helper.c once

Thomas Huth (1):
      hw/arm: Remove hw_error() for the unimplemented CM_LMBUSCNT register

Yucai Liu (2):
      hw/display: Add i.MX6UL LCDIF device model
      hw/arm/fsl-imx6ul: Wire in the LCDIF device model

MAINTAINERS                                       |  16 +-
 docs/system/arm/cpu-features.rst                  |  10 +-
 docs/system/arm/emulation.rst                     |   2 +
 docs/system/arm/{imx8mp-evk.rst => imx8m.rst}     |  49 +-
 docs/system/target-arm.rst                        |   2 +-
 hw/arm/Kconfig                                    |  25 +
 hw/arm/fsl-imx6ul.c                               |  12 +-
 hw/arm/fsl-imx8mm.c                               | 704 ++++++++++++++++++++++
 hw/arm/imx8mm-evk.c                               | 130 ++++
 hw/arm/integratorcp.c                             |   3 -
 hw/arm/meson.build                                |   2 +
 hw/arm/raspi4b.c                                  |  10 +-
 hw/arm/realview.c                                 |   2 +-
 hw/arm/vexpress.c                                 |   2 +-
 hw/arm/virt.c                                     |   1 -
 hw/display/Kconfig                                |   4 +
 hw/display/imx6ul_lcdif.c                         | 453 ++++++++++++++
 hw/display/meson.build                            |   1 +
 hw/misc/arm_sysctl.c                              |   2 +-
 hw/misc/imx8mp_analog.c                           |  12 +-
 hw/timer/imx_gpt.c                                |  26 +
 hw/vmapple/vmapple.c                              |   1 -
 include/hw/arm/fsl-imx6ul.h                       |   4 +-
 include/hw/arm/fsl-imx8mm.h                       | 242 ++++++++
 include/hw/arm/primecell.h                        |  12 -
 include/hw/display/imx6ul_lcdif.h                 |  37 ++
 include/hw/misc/arm_sysctl.h                      |  16 +
 include/hw/misc/imx8mp_analog.h                   |   3 +
 include/hw/timer/imx_gpt.h                        |   2 +
 target/arm/cpu-features.h                         |   5 +
 target/arm/cpu.c                                  | 153 ++++-
 target/arm/cpu.h                                  |   4 +-
 target/arm/cpu64.c                                |  39 ++
 target/arm/debug_helper.c                         |  29 -
 target/arm/helper.c                               |  27 +-
 target/arm/hvf/hvf.c                              |  14 +-
 target/arm/internals.h                            |  60 ++
 target/arm/machine.c                              |  33 +-
 target/arm/syndrome.h                             | 595 ++++++++++++++----
 target/arm/tcg/debug.c                            |   2 +-
 target/arm/tcg/helper-a64.c                       |   2 +-
 target/arm/tcg/helper-defs.h                      |   2 +-
 target/arm/tcg/m_helper.c                         |   8 +-
 target/arm/tcg/meson.build                        |   6 +-
 target/arm/tcg/mve_helper.c                       | 102 ++--
 target/arm/tcg/op_helper.c                        |   7 +-
 target/arm/tcg/tlb_helper.c                       |   6 +-
 target/arm/tcg/translate-a64.c                    |   2 +-
 target/arm/tcg/vfp_helper.c                       |   5 +-
 target/arm/trace-events                           |   2 +
 target/arm/whpx/whpx-all.c                        |  13 +-
 tests/functional/aarch64/meson.build              |   3 +
 tests/functional/aarch64/test_imx8mm_evk.py       |  69 +++
 tests/functional/aarch64/test_virt_aarch64_off.py |  37 ++
 tests/qtest/arm-cpu-features.c                    |   8 +-
 55 files changed, 2743 insertions(+), 275 deletions(-)
 rename docs/system/arm/{imx8mp-evk.rst => imx8m.rst} (58%)
 create mode 100644 hw/arm/fsl-imx8mm.c
 create mode 100644 hw/arm/imx8mm-evk.c
 create mode 100644 hw/display/imx6ul_lcdif.c
 create mode 100644 include/hw/arm/fsl-imx8mm.h
 delete mode 100644 include/hw/arm/primecell.h
 create mode 100644 include/hw/display/imx6ul_lcdif.h
 create mode 100644 include/hw/misc/arm_sysctl.h
 create mode 100755 tests/functional/aarch64/test_imx8mm_evk.py
 create mode 100755 tests/functional/aarch64/test_virt_aarch64_off.py

From: Alex Bennée <alex.bennee@linaro.org>

This is just a documentation tweak as we already support both.
FEAT_AA32 implies FEAT_AA32EL0. FEAT_AA64 implies FEAT_AA64EL[0123].

This is however useful if you are using emulation.rst as a source of
truth of what QEMU emulates and when cross checking with
Features.json from Arm.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20260421093506.616307-1-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 docs/system/arm/emulation.rst | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst
index XXXXXXX..XXXXXXX 100644
--- a/docs/system/arm/emulation.rst
+++ b/docs/system/arm/emulation.rst
@@ -XXX,XX +XXX,XX @@ QEMU's TCG emulation includes support for the Armv5, Armv6, Armv7,
 Armv8 and Armv9 versions of the A-profile architecture. It also has support for
 the following architecture extensions:
 
+- FEAT_AA32 (PE Support for AArch32)
 - FEAT_AA32BF16 (AArch32 BFloat16 instructions)
 - FEAT_AA32EL0 (Support for AArch32 at EL0)
 - FEAT_AA32EL1 (Support for AArch32 at EL1)
@@ -XXX,XX +XXX,XX @@ the following architecture extensions:
 - FEAT_AA32EL3 (Support for AArch32 at EL3)
 - FEAT_AA32HPD (AArch32 hierarchical permission disables)
 - FEAT_AA32I8MM (AArch32 Int8 matrix multiplication instructions)
+- FEAT_AA64 (PE uses AArch64 after last reboot)
 - FEAT_AA64EL0 (Support for AArch64 at EL0)
 - FEAT_AA64EL1 (Support for AArch64 at EL1)
 - FEAT_AA64EL2 (Support for AArch64 at EL2)
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

Implemented CPUs, RAM, UARTs and Interrupt Controller
Other peripherals are represented as TYPE_UNIMPLEMENTED_DEVICE
Complete memory map of the SoC is provided.

Set default RAM size to 2GB and default CPU count to 4 to match
the real i.MX8MM EVK hardware configuration.

Documentation is shared with imx8mp-evk to avoid duplication.

Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
[PMM: fixed over-long lines in doc]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 MAINTAINERS                                   |  11 +-
 docs/system/arm/{imx8mp-evk.rst => imx8m.rst} |  49 ++-
 docs/system/target-arm.rst                    |   2 +-
 hw/arm/Kconfig                                |  12 +
 hw/arm/fsl-imx8mm.c                           | 377 ++++++++++++++++++
 hw/arm/imx8mm-evk.c                           | 112 ++++++
 hw/arm/meson.build                            |   2 +
 include/hw/arm/fsl-imx8mm.h                   | 158 ++++++++
 8 files changed, 709 insertions(+), 14 deletions(-)
 rename docs/system/arm/{imx8mp-evk.rst => imx8m.rst} (58%)
 create mode 100644 hw/arm/fsl-imx8mm.c
 create mode 100644 hw/arm/imx8mm-evk.c
 create mode 100644 include/hw/arm/fsl-imx8mm.h

diff --git a/MAINTAINERS b/MAINTAINERS
index XXXXXXX..XXXXXXX 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -XXX,XX +XXX,XX @@ F: hw/pci-host/designware.c
 F: include/hw/pci-host/designware.h
 F: docs/system/arm/mcimx7d-sabre.rst
 
+MCIMX8MM-EVK / iMX8MM
+M: Gaurav Sharma <gaurav.sharma_7@nxp.com>
+L: qemu-arm@nongnu.org
+S: Maintained
+F: hw/arm/fsl-imx8mm.c
+F: hw/arm/imx8mm-evk.c
+F: include/hw/arm/fsl-imx8mm.h
+F: docs/system/arm/imx8m.rst
+
 MCIMX8MP-EVK / i.MX8MP
 M: Bernhard Beschow <shentey@gmail.com>
 L: qemu-arm@nongnu.org
@@ -XXX,XX +XXX,XX @@ F: hw/rtc/rs5c372.c
 F: include/hw/arm/fsl-imx8mp.h
 F: include/hw/misc/imx8mp_*.h
 F: include/hw/pci-host/fsl_imx8m_phy.h
-F: docs/system/arm/imx8mp-evk.rst
+F: docs/system/arm/imx8m.rst
 F: tests/functional/aarch64/test_imx8mp_evk.py
 F: tests/qtest/rs5c372-test.c
 
diff --git a/docs/system/arm/imx8mp-evk.rst b/docs/system/arm/imx8m.rst
similarity index 58%
rename from docs/system/arm/imx8mp-evk.rst
rename to docs/system/arm/imx8m.rst
index XXXXXXX..XXXXXXX 100644
--- a/docs/system/arm/imx8mp-evk.rst
+++ b/docs/system/arm/imx8m.rst
@@ -XXX,XX +XXX,XX @@
-NXP i.MX 8M Plus Evaluation Kit (``imx8mp-evk``)
-================================================
+NXP i.MX 8M Plus and i.MX 8M Mini Evaluation Kits (``imx8mp-evk``, ``imx8mm-evk``)
+==================================================================================
 
-The ``imx8mp-evk`` machine models the i.MX 8M Plus Evaluation Kit, based on an
-i.MX 8M Plus SoC.
+The ``imx8mp-evk`` and ``imx8mm-evk`` machine models the i.MX 8M Plus
+and i.MX 8M Mini Evaluation Kits, based on i.MX 8M Plus and i.MX8M
+Mini SoCs.
 
 Supported devices
 -----------------
 
-The ``imx8mp-evk`` machine implements the following devices:
+The ``imx8mp-evk`` and ``imx8mm-evk`` machines implement the
+following devices:
 
  * Up to 4 Cortex-A53 cores
  * Generic Interrupt Controller (GICv3)
@@ -XXX,XX +XXX,XX @@ The ``imx8mp-evk`` machine implements the following devices:
 Boot options
 ------------
 
-The ``imx8mp-evk`` machine can start a Linux kernel directly using the standard
-``-kernel`` functionality.
+The ``imx8mp-evk`` and ``imx8mm-evk`` machines can start a Linux
+kernel directly using the standard ``-kernel`` functionality.
 
 Direct Linux Kernel Boot
 ''''''''''''''''''''''''
@@ -XXX,XX +XXX,XX @@ is to generate an image with Buildroot. Version 2024.11.1 is tested at the time
 of writing and involves two steps. First run the following commands in the
 toplevel directory of the Buildroot source tree:
 
+For i.MX 8M Plus EVK:
+
 .. code-block:: bash
 
   $ make freescale_imx8mpevk_defconfig
   $ make
 
+For i.MX 8M Mini EVK:
+
+.. code-block:: bash
+
+  $ make freescale_imx8mmevk_defconfig
+  $ make
+
 Once finished successfully there is an ``output/image`` subfolder. Navigate into
 it and resize the SD card image to a power of two:
 
@@ -XXX,XX +XXX,XX @@ it and resize the SD card image to a power of two:
 
 Now that everything is prepared the machine can be started as follows:
 
+For i.MX 8M Plus EVK:
+
 .. code-block:: bash
 
   $ qemu-system-aarch64 -M imx8mp-evk \
@@ -XXX,XX +XXX,XX @@ Now that everything is prepared the machine can be started as follows:
       -append "root=/dev/mmcblk2p2" \
       -drive file=sdcard.img,if=sd,bus=2,format=raw,id=mmcblk2
 
+For i.MX 8M Mini EVK:
+
+.. code-block:: bash
+
+  $ qemu-system-aarch64 -M imx8mm-evk -smp 4 -m 2G \
+      -display none -serial null -serial stdio \
+      -kernel Image \
+      -dtb imx8mm-evk.dtb \
+      -append "root=/dev/mmcblk2p2" \
+      -drive file=sdcard.img,if=sd,bus=2,format=raw,id=mmcblk2
 
 KVM Acceleration
 ----------------
@@ -XXX,XX +XXX,XX @@ To enable hardware-assisted acceleration via KVM, append
 ``-accel kvm`` to the command line. While this speeds up performance
 significantly, be aware of the following limitations:
 
-* The ``imx8mp-evk`` machine is not included under the "virtualization use case"
-  of :doc:`QEMU's security policy </system/security>`. This means that you
-  should not trust that it can contain malicious guests, whether it is run
-  using TCG or KVM. If you don't trust your guests and you're relying on QEMU to
-  be the security boundary, you want to choose another machine such as ``virt``.
+* The ``imx8mp-evk`` and ``imx8mm-evk`` machines are not included
+  under the "virtualization use case" of :doc:`QEMU's security
+  policy </system/security>`.  This means that you should not trust that
+  it can contain malicious guests, whether it is run using TCG or KVM.
+  If you don't trust your guests and you're relying on QEMU to be the
+  security boundary, you want to choose another machine such as
+  ``virt``.
 * Rather than Cortex-A53 CPUs, the same CPU type as the host's will be used.
   This is a limitation of KVM and may not work with guests with a tight
   dependency on Cortex-A53.
diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst
index XXXXXXX..XXXXXXX 100644
--- a/docs/system/target-arm.rst
+++ b/docs/system/target-arm.rst
@@ -XXX,XX +XXX,XX @@ Board-specific documentation
    arm/imx25-pdk
    arm/mcimx6ul-evk
    arm/mcimx7d-sabre
-   arm/imx8mp-evk
+   arm/imx8m
    arm/orangepi
    arm/raspi
    arm/collie
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -XXX,XX +XXX,XX @@ config FSL_IMX8MP_EVK
     depends on TCG
     select FSL_IMX8MP
 
+config FSL_IMX8MM
+    bool
+    select ARM_GIC
+    select IMX
+
+config FSL_IMX8MM_EVK
+    bool
+    default y
+    depends on AARCH64
+    depends on TCG
+    select FSL_IMX8MM
+
 config ARM_SMMUV3_ACCEL
     bool
     depends on ARM_SMMUV3
diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/hw/arm/fsl-imx8mm.c
@@ -XXX,XX +XXX,XX @@
+/*
+ * i.MX 8MM SoC Implementation
+ *
+ * Based on hw/arm/fsl-imx6.c
+ *
+ * Copyright (c) 2025, NXP Semiconductors
+ * Author: Gaurav Sharma <gaurav.sharma_7@nxp.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * iMX8MM Reference Manual - https://www.nxp.com/products/i.MX8MMINI -> Documentation
+ */
+
+#include "qemu/osdep.h"
+#include "system/address-spaces.h"
+#include "hw/arm/bsa.h"
+#include "hw/arm/fsl-imx8mm.h"
+#include "hw/misc/unimp.h"
+#include "hw/core/boards.h"
+#include "system/kvm.h"
+#include "system/system.h"
+#include "target/arm/cpu.h"
+#include "target/arm/cpu-qom.h"
+#include "target/arm/kvm_arm.h"
+#include "qapi/error.h"
+#include "qobject/qlist.h"
+
+static const struct {
+    hwaddr addr;
+    size_t size;
+    const char *name;
+} fsl_imx8mm_memmap[] = {
+    [FSL_IMX8MM_RAM] = { FSL_IMX8MM_RAM_START, FSL_IMX8MM_RAM_SIZE_MAX, "ram" },
+    [FSL_IMX8MM_DDR_PHY_BROADCAST] = { 0x3dc00000, 4 * MiB, "ddr_phy_broadcast" },
+    [FSL_IMX8MM_DDR_PERF_MON] = { 0x3d800000, 4 * MiB, "ddr_perf_mon" },
+    [FSL_IMX8MM_DDR_CTL] = { 0x3d400000, 4 * MiB, "ddr_ctl" },
+    [FSL_IMX8MM_DDR_PHY] = { 0x3c000000, 16 * MiB, "ddr_phy" },
+    [FSL_IMX8MM_GIC_DIST] = { 0x38800000, 512 * KiB, "gic_dist" },
+    [FSL_IMX8MM_GIC_REDIST] = { 0x38880000, 512 * KiB, "gic_redist" },
+    [FSL_IMX8MM_VPU] = { 0x38340000, 2 * MiB, "vpu" },
+    [FSL_IMX8MM_VPU_BLK_CTRL] = { 0x38330000, 2 * MiB, "vpu_blk_ctrl" },
+    [FSL_IMX8MM_VPU_G2_DECODER] = { 0x38310000, 1 * MiB, "vpu_g2_decoder" },
+    [FSL_IMX8MM_VPU_G1_DECODER] = { 0x38300000, 1 * MiB, "vpu_g1_decoder" },
+    [FSL_IMX8MM_USB2_OTG] = { 0x32e50200, 0x200, "usb2_otg" },
+    [FSL_IMX8MM_USB2] = { 0x32e50000, 0x200, "usb2" },
+    [FSL_IMX8MM_USB1_OTG] = { 0x32e40200, 0x200, "usb1_otg" },
+    [FSL_IMX8MM_USB1] = { 0x32e40000, 0x200, "usb1" },
+    [FSL_IMX8MM_GPU2D] = { 0x38000000, 64 * KiB, "gpu2d" },
+    [FSL_IMX8MM_QSPI1_RX_BUFFER] = { 0x34000000, 32 * MiB, "qspi1_rx_buffer" },
+    [FSL_IMX8MM_PCIE1] = { 0x33800000, 4 * MiB, "pcie1" },
+    [FSL_IMX8MM_QSPI1_TX_BUFFER] = { 0x33008000, 32 * KiB, "qspi1_tx_buffer" },
+    [FSL_IMX8MM_APBH_DMA] = { 0x33000000, 32 * KiB, "apbh_dma" },
+
+    /* AIPS-4 Begin */
+    [FSL_IMX8MM_TZASC] = { 0x32f80000, 64 * KiB, "tzasc" },
+    [FSL_IMX8MM_PCIE_PHY1] = { 0x32f00000, 64 * KiB, "pcie_phy1" },
+    [FSL_IMX8MM_MEDIA_BLK_CTL] = { 0x32e28000, 256, "media_blk_ctl" },
+    [FSL_IMX8MM_LCDIF] = { 0x32e00000, 64 * KiB, "lcdif" },
+    [FSL_IMX8MM_MIPI_DSI] = { 0x32e10000, 64 * KiB, "mipi_dsi" },
+    [FSL_IMX8MM_MIPI_CSI] = { 0x32e30000, 64 * KiB, "mipi_csi" },
+    [FSL_IMX8MM_AIPS4_CONFIGURATION] = { 0x32df0000, 64 * KiB, "aips4_configuration" },
+    /* AIPS-4 End */
+
+    [FSL_IMX8MM_INTERCONNECT] = { 0x32700000, 1 * MiB, "interconnect" },
+
+    /* AIPS-3 Begin */
+    [FSL_IMX8MM_ENET1] = { 0x30be0000, 64 * KiB, "enet1" },
+    [FSL_IMX8MM_SDMA1] = { 0x30bd0000, 64 * KiB, "sdma1" },
+    [FSL_IMX8MM_QSPI] = { 0x30bb0000, 64 * KiB, "qspi" },
+    [FSL_IMX8MM_USDHC3] = { 0x30b60000, 64 * KiB, "usdhc3" },
+    [FSL_IMX8MM_USDHC2] = { 0x30b50000, 64 * KiB, "usdhc2" },
+    [FSL_IMX8MM_USDHC1] = { 0x30b40000, 64 * KiB, "usdhc1" },
+    [FSL_IMX8MM_SEMAPHORE_HS] = { 0x30ac0000, 64 * KiB, "semaphore_hs" },
+    [FSL_IMX8MM_MU_B] = { 0x30ab0000, 64 * KiB, "mu_b" },
+    [FSL_IMX8MM_MU_A] = { 0x30aa0000, 64 * KiB, "mu_a" },
+    [FSL_IMX8MM_UART4] = { 0x30a60000, 64 * KiB, "uart4" },
+    [FSL_IMX8MM_I2C4] = { 0x30a50000, 64 * KiB, "i2c4" },
+    [FSL_IMX8MM_I2C3] = { 0x30a40000, 64 * KiB, "i2c3" },
+    [FSL_IMX8MM_I2C2] = { 0x30a30000, 64 * KiB, "i2c2" },
+    [FSL_IMX8MM_I2C1] = { 0x30a20000, 64 * KiB, "i2c1" },
+    [FSL_IMX8MM_AIPS3_CONFIGURATION] = { 0x309f0000, 64 * KiB, "aips3_configuration" },
+    [FSL_IMX8MM_CAAM] = { 0x30900000, 256 * KiB, "caam" },
+    [FSL_IMX8MM_SPBA1] = { 0x308f0000, 64 * KiB, "spba1" },
+    [FSL_IMX8MM_UART2] = { 0x30890000, 64 * KiB, "uart2" },
+    [FSL_IMX8MM_UART3] = { 0x30880000, 64 * KiB, "uart3" },
+    [FSL_IMX8MM_UART1] = { 0x30860000, 64 * KiB, "uart1" },
+    [FSL_IMX8MM_ECSPI3] = { 0x30840000, 64 * KiB, "ecspi3" },
+    [FSL_IMX8MM_ECSPI2] = { 0x30830000, 64 * KiB, "ecspi2" },
+    [FSL_IMX8MM_ECSPI1] = { 0x30820000, 64 * KiB, "ecspi1" },
+    /* AIPS-3 End */
+
+    /* AIPS-2 Begin */
+    [FSL_IMX8MM_QOSC] = { 0x307f0000, 64 * KiB, "qosc" },
+    [FSL_IMX8MM_PERFMON2] = { 0x307d0000, 64 * KiB, "perfmon2" },
+    [FSL_IMX8MM_PERFMON1] = { 0x307c0000, 64 * KiB, "perfmon1" },
+    [FSL_IMX8MM_GPT4] = { 0x30700000, 64 * KiB, "gpt4" },
+    [FSL_IMX8MM_GPT5] = { 0x306f0000, 64 * KiB, "gpt5" },
+    [FSL_IMX8MM_GPT6] = { 0x306e0000, 64 * KiB, "gpt6" },
+    [FSL_IMX8MM_SYSCNT_CTRL] = { 0x306c0000, 64 * KiB, "syscnt_ctrl" },
+    [FSL_IMX8MM_SYSCNT_CMP] = { 0x306b0000, 64 * KiB, "syscnt_cmp" },
+    [FSL_IMX8MM_SYSCNT_RD] = { 0x306a0000, 64 * KiB, "syscnt_rd" },
+    [FSL_IMX8MM_PWM4] = { 0x30690000, 64 * KiB, "pwm4" },
+    [FSL_IMX8MM_PWM3] = { 0x30680000, 64 * KiB, "pwm3" },
+    [FSL_IMX8MM_PWM2] = { 0x30670000, 64 * KiB, "pwm2" },
+    [FSL_IMX8MM_PWM1] = { 0x30660000, 64 * KiB, "pwm1" },
+    [FSL_IMX8MM_AIPS2_CONFIGURATION] = { 0x305f0000, 64 * KiB, "aips2_configuration" },
+    /* AIPS-2 End */
+
+    /* AIPS-1 Begin */
+    [FSL_IMX8MM_CSU] = { 0x303e0000, 64 * KiB, "csu" },
+    [FSL_IMX8MM_RDC] = { 0x303d0000, 64 * KiB, "rdc" },
+    [FSL_IMX8MM_SEMAPHORE2] = { 0x303c0000, 64 * KiB, "semaphore2" },
+    [FSL_IMX8MM_SEMAPHORE1] = { 0x303b0000, 64 * KiB, "semaphore1" },
+    [FSL_IMX8MM_GPC] = { 0x303a0000, 64 * KiB, "gpc" },
+    [FSL_IMX8MM_SRC] = { 0x30390000, 64 * KiB, "src" },
+    [FSL_IMX8MM_CCM] = { 0x30380000, 64 * KiB, "ccm" },
+    [FSL_IMX8MM_SNVS_HP] = { 0x30370000, 64 * KiB, "snvs_hp" },
+    [FSL_IMX8MM_ANA_PLL] = { 0x30360000, 64 * KiB, "ana_pll" },
+    [FSL_IMX8MM_OCOTP_CTRL] = { 0x30350000, 64 * KiB, "ocotp_ctrl" },
+    [FSL_IMX8MM_IOMUXC_GPR] = { 0x30340000, 64 * KiB, "iomuxc_gpr" },
+    [FSL_IMX8MM_IOMUXC] = { 0x30330000, 64 * KiB, "iomuxc" },
+    [FSL_IMX8MM_GPT3] = { 0x302f0000, 64 * KiB, "gpt3" },
+    [FSL_IMX8MM_GPT2] = { 0x302e0000, 64 * KiB, "gpt2" },
+    [FSL_IMX8MM_GPT1] = { 0x302d0000, 64 * KiB, "gpt1" },
+    [FSL_IMX8MM_SDMA2] = { 0x302c0000, 64 * KiB, "sdma2" },
+    [FSL_IMX8MM_SDMA3] = { 0x302b0000, 64 * KiB, "sdma3" },
+    [FSL_IMX8MM_WDOG3] = { 0x302a0000, 64 * KiB, "wdog3" },
+    [FSL_IMX8MM_WDOG2] = { 0x30290000, 64 * KiB, "wdog2" },
+    [FSL_IMX8MM_WDOG1] = { 0x30280000, 64 * KiB, "wdog1" },
+    [FSL_IMX8MM_ANA_OSC] = { 0x30270000, 64 * KiB, "ana_osc" },
+    [FSL_IMX8MM_ANA_TSENSOR] = { 0x30260000, 64 * KiB, "ana_tsensor" },
+    [FSL_IMX8MM_GPIO5] = { 0x30240000, 64 * KiB, "gpio5" },
+    [FSL_IMX8MM_GPIO4] = { 0x30230000, 64 * KiB, "gpio4" },
+    [FSL_IMX8MM_GPIO3] = { 0x30220000, 64 * KiB, "gpio3" },
+    [FSL_IMX8MM_GPIO2] = { 0x30210000, 64 * KiB, "gpio2" },
+    [FSL_IMX8MM_GPIO1] = { 0x30200000, 64 * KiB, "gpio1" },
+    [FSL_IMX8MM_AIPS1_CONFIGURATION] = { 0x301f0000, 64 * KiB, "aips1_configuration" },
+    [FSL_IMX8MM_SAI6] = { 0x30060000, 64 * KiB, "sai6" },
+    [FSL_IMX8MM_SAI5] = { 0x30050000, 64 * KiB, "sai5" },
+    [FSL_IMX8MM_SAI3] = { 0x30030000, 64 * KiB, "sai3" },
+    [FSL_IMX8MM_SAI2] = { 0x30020000, 64 * KiB, "sai2" },
+    [FSL_IMX8MM_SAI1] = { 0x30010000, 64 * KiB, "sai1" },
+
+    /* AIPS-1 End */
+
+    [FSL_IMX8MM_A53_DAP] = { 0x28000000, 16 * MiB, "a53_dap" },
+    [FSL_IMX8MM_PCIE1_MEM] = { 0x18000000, 128 * MiB, "pcie1_mem" },
+    [FSL_IMX8MM_QSPI_MEM] = { 0x08000000, 256 * MiB, "qspi_mem" },
+    [FSL_IMX8MM_OCRAM] = { 0x00900000, 256 * KiB, "ocram" },
+    [FSL_IMX8MM_TCM_DTCM] = { 0x00800000, 128 * KiB, "tcm_dtcm" },
+    [FSL_IMX8MM_TCM_ITCM] = { 0x007e0000, 128 * KiB, "tcm_itcm" },
+    [FSL_IMX8MM_OCRAM_S] = { 0x00180000, 32 * KiB, "ocram_s" },
+    [FSL_IMX8MM_CAAM_MEM] = { 0x00100000, 32 * KiB, "caam_mem" },
+    [FSL_IMX8MM_BOOT_ROM_PROTECTED] = { 0x0003f000, 4 * KiB, "boot_rom_protected" },
+    [FSL_IMX8MM_BOOT_ROM] = { 0x00000000, 252 * KiB, "boot_rom" },
+};
+
+static void fsl_imx8mm_init(Object *obj)
+{
+    MachineState *ms = MACHINE(qdev_get_machine());
+    FslImx8mmState *s = FSL_IMX8MM(obj);
+    const char *cpu_type = ms->cpu_type ?: ARM_CPU_TYPE_NAME("cortex-a53");
+    int i;
+
+    for (i = 0; i < MIN(ms->smp.cpus, FSL_IMX8MM_NUM_CPUS); i++) {
+        g_autofree char *name = g_strdup_printf("cpu%d", i);
+        object_initialize_child(obj, name, &s->cpu[i], cpu_type);
+    }
+
+    object_initialize_child(obj, "gic", &s->gic, gicv3_class_name());
+
+    for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) {
+        g_autofree char *name = g_strdup_printf("uart%d", i + 1);
+        object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL);
+    }
+
+}
+
+static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
+{
+    MachineState *ms = MACHINE(qdev_get_machine());
+    FslImx8mmState *s = FSL_IMX8MM(dev);
+    DeviceState *gicdev = DEVICE(&s->gic);
+    int i;
+
+    if (ms->smp.cpus > FSL_IMX8MM_NUM_CPUS) {
+        error_setg(errp, "%s: Only %d CPUs are supported (%d requested)",
+                   TYPE_FSL_IMX8MM, FSL_IMX8MM_NUM_CPUS, ms->smp.cpus);
+        return;
+    }
+
+    /* CPUs */
+    for (i = 0; i < ms->smp.cpus; i++) {
+        /* On uniprocessor, the CBAR is set to 0 */
+        if (ms->smp.cpus > 1 &&
+                object_property_find(OBJECT(&s->cpu[i]), "reset-cbar")) {
+            object_property_set_int(OBJECT(&s->cpu[i]), "reset-cbar",
+                                    fsl_imx8mm_memmap[FSL_IMX8MM_GIC_DIST].addr,
+                                    &error_abort);
+        }
+
+        /*
+         * CNTFID0 base frequency in Hz of system counter
+         */
+        object_property_set_int(OBJECT(&s->cpu[i]), "cntfrq", 8000000,
+                                &error_abort);
+
+        if (object_property_find(OBJECT(&s->cpu[i]), "has_el2")) {
+            object_property_set_bool(OBJECT(&s->cpu[i]), "has_el2",
+                                     !kvm_enabled(), &error_abort);
+        }
+
+        if (object_property_find(OBJECT(&s->cpu[i]), "has_el3")) {
+            object_property_set_bool(OBJECT(&s->cpu[i]), "has_el3",
+                                     !kvm_enabled(), &error_abort);
+        }
+
+        if (i) {
+            /*
+             * Secondary CPUs start in powered-down state (and can be
+             * powered up via the SRC system reset controller)
+             */
+            object_property_set_bool(OBJECT(&s->cpu[i]), "start-powered-off",
+                                     true, &error_abort);
+        }
+
+        if (!qdev_realize(DEVICE(&s->cpu[i]), NULL, errp)) {
+            return;
+        }
+    }
+
+    /* GIC */
+    {
+        SysBusDevice *gicsbd = SYS_BUS_DEVICE(&s->gic);
+        QList *redist_region_count;
+        bool pmu = object_property_get_bool(OBJECT(first_cpu), "pmu", NULL);
+
+        qdev_prop_set_uint32(gicdev, "num-cpu", ms->smp.cpus);
+        qdev_prop_set_uint32(gicdev, "num-irq",
+                             FSL_IMX8MM_NUM_IRQS + GIC_INTERNAL);
+        redist_region_count = qlist_new();
+        qlist_append_int(redist_region_count, ms->smp.cpus);
+        qdev_prop_set_array(gicdev, "redist-region-count", redist_region_count);
+        object_property_set_link(OBJECT(&s->gic), "sysmem",
+                                 OBJECT(get_system_memory()), &error_fatal);
+        if (!sysbus_realize(gicsbd, errp)) {
+            return;
+        }
+        sysbus_mmio_map(gicsbd, 0, fsl_imx8mm_memmap[FSL_IMX8MM_GIC_DIST].addr);
+        sysbus_mmio_map(gicsbd, 1, fsl_imx8mm_memmap[FSL_IMX8MM_GIC_REDIST].addr);
+
+        /*
+         * Wire the outputs from each CPU's generic timer and the GICv3
+         * maintenance interrupt signal to the appropriate GIC PPI inputs, and
+         * the GIC's IRQ/FIQ interrupt outputs to the CPU's inputs.
+         */
+        for (i = 0; i < ms->smp.cpus; i++) {
+            DeviceState *cpudev = DEVICE(&s->cpu[i]);
+            int intidbase = FSL_IMX8MM_NUM_IRQS + i * GIC_INTERNAL;
+            qemu_irq irq;
+
+            /*
+             * Mapping from the output timer irq lines from the CPU to the
+             * GIC PPI inputs.
+             */
+            static const int timer_irqs[] = {
+                [GTIMER_PHYS] = ARCH_TIMER_NS_EL1_IRQ,
+                [GTIMER_VIRT] = ARCH_TIMER_VIRT_IRQ,
+                [GTIMER_HYP]  = ARCH_TIMER_NS_EL2_IRQ,
+                [GTIMER_SEC]  = ARCH_TIMER_S_EL1_IRQ,
+            };
+
+            for (int j = 0; j < ARRAY_SIZE(timer_irqs); j++) {
+                irq = qdev_get_gpio_in(gicdev, intidbase + timer_irqs[j]);
+                qdev_connect_gpio_out(cpudev, j, irq);
+            }
+
+            irq = qdev_get_gpio_in(gicdev, intidbase + ARCH_GIC_MAINT_IRQ);
+            qdev_connect_gpio_out_named(cpudev, "gicv3-maintenance-interrupt",
+                                        0, irq);
+
+            irq = qdev_get_gpio_in(gicdev, intidbase + VIRTUAL_PMU_IRQ);
+            qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0, irq);
+
+            sysbus_connect_irq(gicsbd, i,
+                               qdev_get_gpio_in(cpudev, ARM_CPU_IRQ));
+            sysbus_connect_irq(gicsbd, i + ms->smp.cpus,
+                               qdev_get_gpio_in(cpudev, ARM_CPU_FIQ));
+            sysbus_connect_irq(gicsbd, i + 2 * ms->smp.cpus,
+                               qdev_get_gpio_in(cpudev, ARM_CPU_VIRQ));
+            sysbus_connect_irq(gicsbd, i + 3 * ms->smp.cpus,
+                               qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ));
+
+            if (kvm_enabled()) {
+                if (pmu) {
+                    assert(arm_feature(&s->cpu[i].env, ARM_FEATURE_PMU));
+                    if (kvm_irqchip_in_kernel()) {
+                        kvm_arm_pmu_set_irq(&s->cpu[i], VIRTUAL_PMU_IRQ);
+                    }
+                    kvm_arm_pmu_init(&s->cpu[i]);
+                }
+            }
+        }
+    }
+
+    /* UARTs */
+    for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) {
+        static const struct {
+            hwaddr addr;
+            unsigned int irq;
+        } serial_table[FSL_IMX8MM_NUM_UARTS] = {
+            { fsl_imx8mm_memmap[FSL_IMX8MM_UART1].addr, FSL_IMX8MM_UART1_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_UART2].addr, FSL_IMX8MM_UART2_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_UART3].addr, FSL_IMX8MM_UART3_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_UART4].addr, FSL_IMX8MM_UART4_IRQ },
+        };
+
+        qdev_prop_set_chr(DEVICE(&s->uart[i]), "chardev", serial_hd(i));
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->uart[i]), errp)) {
+            return;
+        }
+
+        sysbus_mmio_map(SYS_BUS_DEVICE(&s->uart[i]), 0, serial_table[i].addr);
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->uart[i]), 0,
+                           qdev_get_gpio_in(gicdev, serial_table[i].irq));
+    }
+
+    /* On-Chip RAM */
+    if (!memory_region_init_ram(&s->ocram, OBJECT(dev), "imx8mm.ocram",
+                                fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].size,
+                                errp)) {
+        return;
+    }
+    memory_region_add_subregion(get_system_memory(),
+                                fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr,
+                                &s->ocram);
+
+    /* Unimplemented devices */
+    for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) {
+        switch (i) {
+        case FSL_IMX8MM_GIC_DIST:
+        case FSL_IMX8MM_GIC_REDIST:
+        case FSL_IMX8MM_RAM:
+        case FSL_IMX8MM_OCRAM:
+        case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4:
+            /* device implemented and treated above */
+            break;
+
+        default:
+            create_unimplemented_device(fsl_imx8mm_memmap[i].name,
+                                        fsl_imx8mm_memmap[i].addr,
+                                        fsl_imx8mm_memmap[i].size);
+            break;
+        }
+    }
+}
+
+static void fsl_imx8mm_class_init(ObjectClass *oc, const void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(oc);
+
+    dc->realize = fsl_imx8mm_realize;
+
+    dc->desc = "i.MX 8MM SoC";
+}
+
+static const TypeInfo fsl_imx8mm_types[] = {
+    {
+        .name = TYPE_FSL_IMX8MM,
+        .parent = TYPE_SYS_BUS_DEVICE,
+        .instance_size = sizeof(FslImx8mmState),
+        .instance_init = fsl_imx8mm_init,
+        .class_init = fsl_imx8mm_class_init,
+    },
+};
+
+DEFINE_TYPES(fsl_imx8mm_types)
diff --git a/hw/arm/imx8mm-evk.c b/hw/arm/imx8mm-evk.c
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/hw/arm/imx8mm-evk.c
@@ -XXX,XX +XXX,XX @@
+/*
+ * NXP i.MX 8MM Evaluation Kit System Emulation
+ *
+ * Copyright (c) 2025, NXP Semiconductors
+ * Author: Gaurav Sharma <gaurav.sharma_7@nxp.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "system/address-spaces.h"
+#include "hw/arm/boot.h"
+#include "hw/arm/fsl-imx8mm.h"
+#include "hw/arm/machines-qom.h"
+#include "hw/core/boards.h"
+#include "hw/core/qdev-properties.h"
+#include "system/kvm.h"
+#include "system/qtest.h"
+#include "qemu/error-report.h"
+#include "qapi/error.h"
+#include <libfdt.h>
+
+static void imx8mm_evk_modify_dtb(const struct arm_boot_info *info, void *fdt)
+{
+    int i, offset;
+
+    /* Temporarily disable following nodes until they are implemented */
+    const char *nodes_to_remove[] = {
+        "nxp,imx8mm-fspi",
+        "fsl,imx8mm-mipi-csi",
+        "fsl,imx8mm-mipi-dsim"
+    };
+
+    for (i = 0; i < ARRAY_SIZE(nodes_to_remove); i++) {
+        const char *dev_str = nodes_to_remove[i];
+
+        offset = fdt_node_offset_by_compatible(fdt, -1, dev_str);
+        while (offset >= 0) {
+            fdt_nop_node(fdt, offset);
+            offset = fdt_node_offset_by_compatible(fdt, offset, dev_str);
+        }
+    }
+
+    /* Remove cpu-idle-states property from CPU nodes */
+    offset = fdt_node_offset_by_compatible(fdt, -1, "arm,cortex-a53");
+    while (offset >= 0) {
+        fdt_nop_property(fdt, offset, "cpu-idle-states");
+        offset = fdt_node_offset_by_compatible(fdt, offset, "arm,cortex-a53");
+    }
+
+    if (kvm_enabled()) {
+        /* Use system counter frequency from host CPU to fix time in guest */
+        offset = fdt_node_offset_by_compatible(fdt, -1, "arm,armv8-timer");
+        while (offset >= 0) {
+            fdt_nop_property(fdt, offset, "clock-frequency");
+            offset = fdt_node_offset_by_compatible(fdt, offset, "arm,armv8-timer");
+        }
+    }
+}
+
+static void imx8mm_evk_init(MachineState *machine)
+{
+    static struct arm_boot_info boot_info;
+    FslImx8mmState *s;
+
+    if (machine->ram_size > FSL_IMX8MM_RAM_SIZE_MAX) {
+        error_report("RAM size " RAM_ADDR_FMT " above max supported (%08" PRIx64 ")",
+                     machine->ram_size, FSL_IMX8MM_RAM_SIZE_MAX);
+        exit(1);
+    }
+
+    boot_info = (struct arm_boot_info) {
+        .loader_start = FSL_IMX8MM_RAM_START,
+        .board_id = -1,
+        .ram_size = machine->ram_size,
+        .psci_conduit = QEMU_PSCI_CONDUIT_SMC,
+        .modify_dtb = imx8mm_evk_modify_dtb,
+    };
+
+    s = FSL_IMX8MM(object_new_with_props(TYPE_FSL_IMX8MM, OBJECT(machine),
+                                         "soc", &error_fatal, NULL));
+    sysbus_realize_and_unref(SYS_BUS_DEVICE(s), &error_fatal);
+
+    memory_region_add_subregion(get_system_memory(), FSL_IMX8MM_RAM_START,
+                                machine->ram);
+
+    if (!qtest_enabled()) {
+        arm_load_kernel(&s->cpu[0], machine, &boot_info);
+    }
+}
+
+static const char *imx8mm_evk_get_default_cpu_type(const MachineState *ms)
+{
+    if (kvm_enabled()) {
+        return ARM_CPU_TYPE_NAME("host");
+    }
+
+    return ARM_CPU_TYPE_NAME("cortex-a53");
+}
+
+static void imx8mm_evk_machine_init(MachineClass *mc)
+{
+    mc->desc = "NXP i.MX 8MM EVK Board";
+    mc->init = imx8mm_evk_init;
+    mc->max_cpus = FSL_IMX8MM_NUM_CPUS;
+    mc->default_cpus = FSL_IMX8MM_NUM_CPUS;
+    mc->default_ram_size = 2 * GiB;
+    mc->default_ram_id = "imx8mm-evk.ram";
+    mc->get_default_cpu_type = imx8mm_evk_get_default_cpu_type;
+}
+
+DEFINE_MACHINE_AARCH64("imx8mm-evk", imx8mm_evk_machine_init)
diff --git a/hw/arm/meson.build b/hw/arm/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/meson.build
+++ b/hw/arm/meson.build
@@ -XXX,XX +XXX,XX @@ arm_common_ss.add(when: 'CONFIG_ARMSSE', if_true: files('armsse.c'))
 arm_common_ss.add(when: 'CONFIG_FSL_IMX7', if_true: files('fsl-imx7.c', 'mcimx7d-sabre.c'))
 arm_common_ss.add(when: 'CONFIG_FSL_IMX8MP', if_true: files('fsl-imx8mp.c'))
 arm_common_ss.add(when: 'CONFIG_FSL_IMX8MP_EVK', if_true: files('imx8mp-evk.c'))
+arm_common_ss.add(when: 'CONFIG_FSL_IMX8MM', if_true: files('fsl-imx8mm.c'))
+arm_common_ss.add(when: 'CONFIG_FSL_IMX8MM_EVK', if_true: files('imx8mm-evk.c'))
 arm_common_ss.add(when: 'CONFIG_ARM_SMMUV3', if_true: files('smmuv3.c'))
 arm_common_ss.add(when: 'CONFIG_ARM_SMMUV3_ACCEL', if_true: files('smmuv3-accel.c'))
 stub_ss.add(files('smmuv3-accel-stubs.c'))
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -XXX,XX +XXX,XX @@
+/*
+ * i.MX 8MM SoC Definitions
+ *
+ * Copyright (c) 2025, NXP Semiconductors
+ * Author: Gaurav Sharma <gaurav.sharma_7@nxp.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#ifndef FSL_IMX8MM_H
+#define FSL_IMX8MM_H
+
+#include "cpu.h"
+#include "hw/char/imx_serial.h"
+#include "hw/intc/arm_gicv3_common.h"
+#include "qom/object.h"
+#include "qemu/units.h"
+
+#define TYPE_FSL_IMX8MM "fsl-imx8mm"
+OBJECT_DECLARE_SIMPLE_TYPE(FslImx8mmState, FSL_IMX8MM)
+
+#define FSL_IMX8MM_RAM_START        0x40000000
+#define FSL_IMX8MM_RAM_SIZE_MAX     (4 * GiB)
+
+enum FslImx8mmConfiguration {
+    FSL_IMX8MM_NUM_CPUS         = 4,
+    FSL_IMX8MM_NUM_IRQS         = 128,
+    FSL_IMX8MM_NUM_UARTS        = 4,
+};
+
+struct FslImx8mmState {
+    SysBusDevice   parent_obj;
+
+    ARMCPU             cpu[FSL_IMX8MM_NUM_CPUS];
+    GICv3State         gic;
+    IMXSerialState     uart[FSL_IMX8MM_NUM_UARTS];
+    MemoryRegion ocram;
+};
+
+enum FslImx8mmMemoryRegions {
+    FSL_IMX8MM_A53_DAP,
+    FSL_IMX8MM_AIPS1_CONFIGURATION,
+    FSL_IMX8MM_AIPS2_CONFIGURATION,
+    FSL_IMX8MM_AIPS3_CONFIGURATION,
+    FSL_IMX8MM_AIPS4_CONFIGURATION,
+    FSL_IMX8MM_ANA_OSC,
+    FSL_IMX8MM_ANA_PLL,
+    FSL_IMX8MM_ANA_TSENSOR,
+    FSL_IMX8MM_APBH_DMA,
+    FSL_IMX8MM_BOOT_ROM,
+    FSL_IMX8MM_BOOT_ROM_PROTECTED,
+    FSL_IMX8MM_CAAM,
+    FSL_IMX8MM_CAAM_MEM,
+    FSL_IMX8MM_CCM,
+    FSL_IMX8MM_CSU,
+    FSL_IMX8MM_DDR_CTL,
+    FSL_IMX8MM_DDR_PERF_MON,
+    FSL_IMX8MM_DDR_PHY,
+    FSL_IMX8MM_DDR_PHY_BROADCAST,
+    FSL_IMX8MM_ECSPI1,
+    FSL_IMX8MM_ECSPI2,
+    FSL_IMX8MM_ECSPI3,
+    FSL_IMX8MM_ENET1,
+    FSL_IMX8MM_GIC_DIST,
+    FSL_IMX8MM_GIC_REDIST,
+    FSL_IMX8MM_GPC,
+    FSL_IMX8MM_GPIO1,
+    FSL_IMX8MM_GPIO2,
+    FSL_IMX8MM_GPIO3,
+    FSL_IMX8MM_GPIO4,
+    FSL_IMX8MM_GPIO5,
+    FSL_IMX8MM_GPT1,
+    FSL_IMX8MM_GPT2,
+    FSL_IMX8MM_GPT3,
+    FSL_IMX8MM_GPT4,
+    FSL_IMX8MM_GPT5,
+    FSL_IMX8MM_GPT6,
+    FSL_IMX8MM_GPU2D,
+    FSL_IMX8MM_I2C1,
+    FSL_IMX8MM_I2C2,
+    FSL_IMX8MM_I2C3,
+    FSL_IMX8MM_I2C4,
+    FSL_IMX8MM_INTERCONNECT,
+    FSL_IMX8MM_IOMUXC,
+    FSL_IMX8MM_IOMUXC_GPR,
+    FSL_IMX8MM_MEDIA_BLK_CTL,
+    FSL_IMX8MM_LCDIF,
+    FSL_IMX8MM_MIPI_CSI,
+    FSL_IMX8MM_MIPI_DSI,
+    FSL_IMX8MM_MU_A,
+    FSL_IMX8MM_MU_B,
+    FSL_IMX8MM_OCOTP_CTRL,
+    FSL_IMX8MM_OCRAM,
+    FSL_IMX8MM_OCRAM_S,
+    FSL_IMX8MM_PCIE1,
+    FSL_IMX8MM_PCIE1_MEM,
+    FSL_IMX8MM_PCIE_PHY1,
+    FSL_IMX8MM_PERFMON1,
+    FSL_IMX8MM_PERFMON2,
+    FSL_IMX8MM_PWM1,
+    FSL_IMX8MM_PWM2,
+    FSL_IMX8MM_PWM3,
+    FSL_IMX8MM_PWM4,
+    FSL_IMX8MM_QOSC,
+    FSL_IMX8MM_QSPI,
+    FSL_IMX8MM_QSPI1_RX_BUFFER,
+    FSL_IMX8MM_QSPI1_TX_BUFFER,
+    FSL_IMX8MM_QSPI_MEM,
+    FSL_IMX8MM_RAM,
+    FSL_IMX8MM_RDC,
+    FSL_IMX8MM_SAI1,
+    FSL_IMX8MM_SAI2,
+    FSL_IMX8MM_SAI3,
+    FSL_IMX8MM_SAI5,
+    FSL_IMX8MM_SAI6,
+    FSL_IMX8MM_SDMA1,
+    FSL_IMX8MM_SDMA2,
+    FSL_IMX8MM_SDMA3,
+    FSL_IMX8MM_SEMAPHORE1,
+    FSL_IMX8MM_SEMAPHORE2,
+    FSL_IMX8MM_SEMAPHORE_HS,
+    FSL_IMX8MM_SNVS_HP,
+    FSL_IMX8MM_SPBA1,
+    FSL_IMX8MM_SRC,
+    FSL_IMX8MM_SYSCNT_CMP,
+    FSL_IMX8MM_SYSCNT_CTRL,
+    FSL_IMX8MM_SYSCNT_RD,
+    FSL_IMX8MM_TCM_DTCM,
+    FSL_IMX8MM_TCM_ITCM,
+    FSL_IMX8MM_TZASC,
+    FSL_IMX8MM_UART1,
+    FSL_IMX8MM_UART2,
+    FSL_IMX8MM_UART3,
+    FSL_IMX8MM_UART4,
+    FSL_IMX8MM_USB1,
+    FSL_IMX8MM_USB2,
+    FSL_IMX8MM_USB1_OTG,
+    FSL_IMX8MM_USB2_OTG,
+    FSL_IMX8MM_USDHC1,
+    FSL_IMX8MM_USDHC2,
+    FSL_IMX8MM_USDHC3,
+    FSL_IMX8MM_VPU,
+    FSL_IMX8MM_VPU_BLK_CTRL,
+    FSL_IMX8MM_VPU_G1_DECODER,
+    FSL_IMX8MM_VPU_G2_DECODER,
+    FSL_IMX8MM_WDOG1,
+    FSL_IMX8MM_WDOG2,
+    FSL_IMX8MM_WDOG3,
+};
+
+enum FslImx8mmIrqs {
+    FSL_IMX8MM_UART1_IRQ    = 26,
+    FSL_IMX8MM_UART2_IRQ    = 27,
+    FSL_IMX8MM_UART3_IRQ    = 28,
+    FSL_IMX8MM_UART4_IRQ    = 29,
+};
+
+#endif /* FSL_IMX8MM_H */
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

Add configurable properties for register reset values that differ
between i.MX 8M variants (Plus, Mini, etc.). This allows the same
device implementation to be shared across multiple SoCs.

Properties added:
- arm-pll-fdiv-ctl0-reset: ARM PLL divider control reset value

Default value is set to match i.MX 8MP reset value (0x000FA031).
This can be overridden in the variant like iMX8MM with its own
reset value.

Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/misc/imx8mp_analog.c         | 12 +++++++++++-
 include/hw/misc/imx8mp_analog.h |  3 +++
 2 files changed, 14 insertions(+), 1 deletion(-)

diff --git a/hw/misc/imx8mp_analog.c b/hw/misc/imx8mp_analog.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/misc/imx8mp_analog.c
+++ b/hw/misc/imx8mp_analog.c
@@ -XXX,XX +XXX,XX @@
 #include "qemu/log.h"
 
 #include "hw/misc/imx8mp_analog.h"
+#include "hw/core/qdev-properties.h"
 #include "migration/vmstate.h"
 
 #define ANALOG_PLL_LOCK BIT(31)
@@ -XXX,XX +XXX,XX @@ static void imx8mp_analog_reset(DeviceState *dev)
     s->analog[ANALOG_VPU_PLL_LOCKD_CTRL] = 0x0010003f;
     s->analog[ANALOG_VPU_PLL_MNIT_CTRL] = 0x00280081;
     s->analog[ANALOG_ARM_PLL_GEN_CTRL] = 0x00000810;
-    s->analog[ANALOG_ARM_PLL_FDIV_CTL0] = 0x000fa031;
+
+    /* Use property value instead of hardcoded */
+    s->analog[ANALOG_ARM_PLL_FDIV_CTL0] = s->arm_pll_fdiv_ctl0_reset;
+
     s->analog[ANALOG_ARM_PLL_LOCKD_CTRL] = 0x0010003f;
     s->analog[ANALOG_ARM_PLL_MNIT_CTRL] = 0x00280081;
     s->analog[ANALOG_SYS_PLL1_GEN_CTRL] = 0x0aaaa810;
@@ -XXX,XX +XXX,XX @@ static const VMStateDescription imx8mp_analog_vmstate = {
     },
 };
 
+static const Property imx8mp_analog_properties[] = {
+    DEFINE_PROP_UINT32("arm-pll-fdiv-ctl0-reset", IMX8MPAnalogState,
+                       arm_pll_fdiv_ctl0_reset, 0x000fa031), /* imx8mp default */
+};
+
 static void imx8mp_analog_class_init(ObjectClass *klass, const void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
 
     device_class_set_legacy_reset(dc, imx8mp_analog_reset);
+    device_class_set_props(dc, imx8mp_analog_properties);
     dc->vmsd  = &imx8mp_analog_vmstate;
     dc->desc  = "i.MX 8M Plus Analog Module";
 }
diff --git a/include/hw/misc/imx8mp_analog.h b/include/hw/misc/imx8mp_analog.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/misc/imx8mp_analog.h
+++ b/include/hw/misc/imx8mp_analog.h
@@ -XXX,XX +XXX,XX @@ struct IMX8MPAnalogState {
     } mmio;
 
     uint32_t analog[ANALOG_MAX];
+
+    /* Property for variant-specific reset values */
+    uint32_t arm_pll_fdiv_ctl0_reset;
 };
 
 #endif /* IMX8MP_ANALOG_H */
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

Add the Analog IP to i.MX8MM SoC. iMX8MM and i.MX8MP uses
the same Analog IP so the analog ip source will be shared.

The ARM PLL divider control register (arm-pll-fdiv-ctl0) has
a different reset value on i.MX8MM (0x000fa030) compared to
i.MX8MP (0x000fa031). So iMX8MM will be overriding this property
with its own reset-value.

Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/Kconfig              |  1 +
 hw/arm/fsl-imx8mm.c         | 12 ++++++++++++
 include/hw/arm/fsl-imx8mm.h |  2 ++
 3 files changed, 15 insertions(+)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -XXX,XX +XXX,XX @@ config FSL_IMX8MP_EVK
 config FSL_IMX8MM
     bool
     select ARM_GIC
+    select FSL_IMX8MP_ANALOG
     select IMX
 
 config FSL_IMX8MM_EVK
diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx8mm.c
+++ b/hw/arm/fsl-imx8mm.c
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj)
 
     object_initialize_child(obj, "gic", &s->gic, gicv3_class_name());
 
+    object_initialize_child(obj, "analog", &s->analog, TYPE_IMX8MP_ANALOG);
+
     for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) {
         g_autofree char *name = g_strdup_printf("uart%d", i + 1);
         object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL);
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
         }
     }
 
+    /* Analog */
+    object_property_set_uint(OBJECT(&s->analog), "arm-pll-fdiv-ctl0-reset",
+                            0x000fa030, &error_abort);
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->analog), errp)) {
+        return;
+    }
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->analog), 0,
+                    fsl_imx8mm_memmap[FSL_IMX8MM_ANA_PLL].addr);
+
     /* UARTs */
     for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) {
         static const struct {
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
     /* Unimplemented devices */
     for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) {
         switch (i) {
+        case FSL_IMX8MM_ANA_PLL:
         case FSL_IMX8MM_GIC_DIST:
         case FSL_IMX8MM_GIC_REDIST:
         case FSL_IMX8MM_RAM:
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx8mm.h
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -XXX,XX +XXX,XX @@
 #include "cpu.h"
 #include "hw/char/imx_serial.h"
 #include "hw/intc/arm_gicv3_common.h"
+#include "hw/misc/imx8mp_analog.h"
 #include "qom/object.h"
 #include "qemu/units.h"
 
@@ -XXX,XX +XXX,XX @@ struct FslImx8mmState {
 
     ARMCPU             cpu[FSL_IMX8MM_NUM_CPUS];
     GICv3State         gic;
+    IMX8MPAnalogState  analog;
     IMXSerialState     uart[FSL_IMX8MM_NUM_UARTS];
     MemoryRegion ocram;
 };
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

Add the Clock Control Module (CCM) device to i.MX8MM SoC.
The CCM implementation is shared with i.MX8MP as the register
layout is identical between the two variants.Hence iMX8MM will
be using the source of iMX8MP CCM.

Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/Kconfig              |  1 +
 hw/arm/fsl-imx8mm.c         | 10 ++++++++++
 include/hw/arm/fsl-imx8mm.h |  2 ++
 3 files changed, 13 insertions(+)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM
     bool
     select ARM_GIC
     select FSL_IMX8MP_ANALOG
+    select FSL_IMX8MP_CCM
     select IMX
 
 config FSL_IMX8MM_EVK
diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx8mm.c
+++ b/hw/arm/fsl-imx8mm.c
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj)
 
     object_initialize_child(obj, "gic", &s->gic, gicv3_class_name());
 
+    object_initialize_child(obj, "ccm", &s->ccm, TYPE_IMX8MP_CCM);
+
     object_initialize_child(obj, "analog", &s->analog, TYPE_IMX8MP_ANALOG);
 
     for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) {
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
         }
     }
 
+    /* CCM */
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->ccm), errp)) {
+        return;
+    }
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->ccm), 0,
+                    fsl_imx8mm_memmap[FSL_IMX8MM_CCM].addr);
+
     /* Analog */
     object_property_set_uint(OBJECT(&s->analog), "arm-pll-fdiv-ctl0-reset",
                             0x000fa030, &error_abort);
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
     for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) {
         switch (i) {
         case FSL_IMX8MM_ANA_PLL:
+        case FSL_IMX8MM_CCM:
         case FSL_IMX8MM_GIC_DIST:
         case FSL_IMX8MM_GIC_REDIST:
         case FSL_IMX8MM_RAM:
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx8mm.h
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -XXX,XX +XXX,XX @@
 #include "hw/char/imx_serial.h"
 #include "hw/intc/arm_gicv3_common.h"
 #include "hw/misc/imx8mp_analog.h"
+#include "hw/misc/imx8mp_ccm.h"
 #include "qom/object.h"
 #include "qemu/units.h"
 
@@ -XXX,XX +XXX,XX @@ struct FslImx8mmState {
 
     ARMCPU             cpu[FSL_IMX8MM_NUM_CPUS];
     GICv3State         gic;
+    IMX8MPCCMState     ccm;
     IMX8MPAnalogState  analog;
     IMXSerialState     uart[FSL_IMX8MM_NUM_UARTS];
     MemoryRegion ocram;
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

SNVS contains an RTC which allows Linux to deal correctly with time

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

It enables emulation of SD/MMC cards through a virtual SDHCI interface
The emulated SDHCI controller allows guest OS to use emulated storage as
a standard block device.
This will allow running the images such as those generated
by Buildroot.

Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/Kconfig              |  1 +
 hw/arm/fsl-imx8mm.c         | 25 +++++++++++++++++++++++++
 hw/arm/imx8mm-evk.c         | 17 +++++++++++++++++
 include/hw/arm/fsl-imx8mm.h |  7 +++++++
 4 files changed, 50 insertions(+)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM
     select FSL_IMX8MP_ANALOG
     select FSL_IMX8MP_CCM
     select IMX
+    select SDHCI
 
 config FSL_IMX8MM_EVK
     bool
diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx8mm.c
+++ b/hw/arm/fsl-imx8mm.c
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj)
         object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL);
     }
 
+    for (i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) {
+        g_autofree char *name = g_strdup_printf("usdhc%d", i + 1);
+        object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC);
+    }
 }
 
 static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
                                 fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr,
                                 &s->ocram);
 
+    /* USDHCs */
+    for (i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) {
+        static const struct {
+            hwaddr addr;
+            unsigned int irq;
+        } usdhc_table[FSL_IMX8MM_NUM_USDHCS] = {
+            { fsl_imx8mm_memmap[FSL_IMX8MM_USDHC1].addr, FSL_IMX8MM_USDHC1_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_USDHC2].addr, FSL_IMX8MM_USDHC2_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_USDHC3].addr, FSL_IMX8MM_USDHC3_IRQ },
+        };
+
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->usdhc[i]), errp)) {
+            return;
+        }
+
+        sysbus_mmio_map(SYS_BUS_DEVICE(&s->usdhc[i]), 0, usdhc_table[i].addr);
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->usdhc[i]), 0,
+                           qdev_get_gpio_in(gicdev, usdhc_table[i].irq));
+    }
+
     /* SNVS */
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->snvs), errp)) {
         return;
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
         case FSL_IMX8MM_OCRAM:
         case FSL_IMX8MM_SNVS_HP:
         case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4:
+        case FSL_IMX8MM_USDHC1 ... FSL_IMX8MM_USDHC3:
             /* device implemented and treated above */
             break;
 
diff --git a/hw/arm/imx8mm-evk.c b/hw/arm/imx8mm-evk.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/imx8mm-evk.c
+++ b/hw/arm/imx8mm-evk.c
@@ -XXX,XX +XXX,XX @@ static void imx8mm_evk_init(MachineState *machine)
     memory_region_add_subregion(get_system_memory(), FSL_IMX8MM_RAM_START,
                                 machine->ram);
 
+    for (int i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) {
+        BusState *bus;
+        DeviceState *carddev;
+        BlockBackend *blk;
+        DriveInfo *di = drive_get(IF_SD, i, 0);
+
+        if (!di) {
+            continue;
+        }
+
+        blk = blk_by_legacy_dinfo(di);
+        bus = qdev_get_child_bus(DEVICE(&s->usdhc[i]), "sd-bus");
+        carddev = qdev_new(TYPE_SD_CARD);
+        qdev_prop_set_drive_err(carddev, "drive", blk, &error_fatal);
+        qdev_realize_and_unref(carddev, bus, &error_fatal);
+    }
+
     if (!qtest_enabled()) {
         arm_load_kernel(&s->cpu[0], machine, &boot_info);
     }
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx8mm.h
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -XXX,XX +XXX,XX @@
 #include "hw/misc/imx7_snvs.h"
 #include "hw/misc/imx8mp_analog.h"
 #include "hw/misc/imx8mp_ccm.h"
+#include "hw/sd/sdhci.h"
 #include "qom/object.h"
 #include "qemu/units.h"
 
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmConfiguration {
     FSL_IMX8MM_NUM_CPUS         = 4,
     FSL_IMX8MM_NUM_IRQS         = 128,
     FSL_IMX8MM_NUM_UARTS        = 4,
+    FSL_IMX8MM_NUM_USDHCS       = 3,
 };
 
 struct FslImx8mmState {
@@ -XXX,XX +XXX,XX @@ struct FslImx8mmState {
     IMX7SNVSState      snvs;
     IMXSerialState     uart[FSL_IMX8MM_NUM_UARTS];
     MemoryRegion ocram;
+    SDHCIState         usdhc[FSL_IMX8MM_NUM_USDHCS];
 };
 
 enum FslImx8mmMemoryRegions {
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmMemoryRegions {
 };
 
 enum FslImx8mmIrqs {
+    FSL_IMX8MM_USDHC1_IRQ   = 22,
+    FSL_IMX8MM_USDHC2_IRQ   = 23,
+    FSL_IMX8MM_USDHC3_IRQ   = 24,
+
     FSL_IMX8MM_UART1_IRQ    = 26,
     FSL_IMX8MM_UART2_IRQ    = 27,
     FSL_IMX8MM_UART3_IRQ    = 28,
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

This enables support for Designware PCI Express Controller emulation
It provides a controlled environment to debug the linux pci subsystem

Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/Kconfig              |  3 +++
 hw/arm/fsl-imx8mm.c         | 30 ++++++++++++++++++++++++++++++
 include/hw/arm/fsl-imx8mm.h | 10 ++++++++++
 3 files changed, 43 insertions(+)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -XXX,XX +XXX,XX @@ config FSL_IMX8MP_EVK
 
 config FSL_IMX8MM
     bool
+    imply PCI_DEVICES
     select ARM_GIC
     select FSL_IMX8MP_ANALOG
     select FSL_IMX8MP_CCM
     select IMX
     select SDHCI
+    select PCI_EXPRESS_DESIGNWARE
+    select PCI_EXPRESS_FSL_IMX8M_PHY
 
 config FSL_IMX8MM_EVK
     bool
diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx8mm.c
+++ b/hw/arm/fsl-imx8mm.c
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj)
         g_autofree char *name = g_strdup_printf("usdhc%d", i + 1);
         object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC);
     }
+
+    object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST);
+    object_initialize_child(obj, "pcie_phy", &s->pcie_phy,
+                            TYPE_FSL_IMX8M_PCIE_PHY);
 }
 
 static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
     sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0,
                     fsl_imx8mm_memmap[FSL_IMX8MM_SNVS_HP].addr);
 
+    /* PCIe */
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->pcie), errp)) {
+        return;
+    }
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->pcie), 0,
+                    fsl_imx8mm_memmap[FSL_IMX8MM_PCIE1].addr);
+
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 0,
+                       qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_INTA_IRQ));
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 1,
+                       qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_INTB_IRQ));
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 2,
+                       qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_INTC_IRQ));
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 3,
+                       qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_INTD_IRQ));
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 4,
+                       qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_MSI_IRQ));
+
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->pcie_phy), errp)) {
+        return;
+    }
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->pcie_phy), 0,
+                    fsl_imx8mm_memmap[FSL_IMX8MM_PCIE_PHY1].addr);
+
     /* Unimplemented devices */
     for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) {
         switch (i) {
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
         case FSL_IMX8MM_CCM:
         case FSL_IMX8MM_GIC_DIST:
         case FSL_IMX8MM_GIC_REDIST:
+        case FSL_IMX8MM_PCIE1:
+        case FSL_IMX8MM_PCIE_PHY1:
         case FSL_IMX8MM_RAM:
         case FSL_IMX8MM_OCRAM:
         case FSL_IMX8MM_SNVS_HP:
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx8mm.h
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -XXX,XX +XXX,XX @@
 #include "hw/misc/imx7_snvs.h"
 #include "hw/misc/imx8mp_analog.h"
 #include "hw/misc/imx8mp_ccm.h"
+#include "hw/pci-host/designware.h"
+#include "hw/pci-host/fsl_imx8m_phy.h"
 #include "hw/sd/sdhci.h"
 #include "qom/object.h"
 #include "qemu/units.h"
@@ -XXX,XX +XXX,XX @@ struct FslImx8mmState {
     IMXSerialState     uart[FSL_IMX8MM_NUM_UARTS];
     MemoryRegion ocram;
     SDHCIState         usdhc[FSL_IMX8MM_NUM_USDHCS];
+    DesignwarePCIEHost pcie;
+    FslImx8mPciePhyState   pcie_phy;
 };
 
 enum FslImx8mmMemoryRegions {
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs {
     FSL_IMX8MM_UART2_IRQ    = 27,
     FSL_IMX8MM_UART3_IRQ    = 28,
     FSL_IMX8MM_UART4_IRQ    = 29,
+
+    FSL_IMX8MM_PCI_INTA_IRQ = 122,
+    FSL_IMX8MM_PCI_INTB_IRQ = 123,
+    FSL_IMX8MM_PCI_INTC_IRQ = 124,
+    FSL_IMX8MM_PCI_INTD_IRQ = 125,
+    FSL_IMX8MM_PCI_MSI_IRQ  = 127,
 };
 
 #endif /* FSL_IMX8MM_H */
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

Enabled GPIO controller emulation
Also updated the GPIO IRQ lines of iMX8MM

Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/fsl-imx8mm.c         | 54 +++++++++++++++++++++++++++++++++++++
 include/hw/arm/fsl-imx8mm.h | 14 ++++++++++
 2 files changed, 68 insertions(+)

diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx8mm.c
+++ b/hw/arm/fsl-imx8mm.c
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj)
         object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL);
     }
 
+    for (i = 0; i < FSL_IMX8MM_NUM_GPIOS; i++) {
+        g_autofree char *name = g_strdup_printf("gpio%d", i + 1);
+        object_initialize_child(obj, name, &s->gpio[i], TYPE_IMX_GPIO);
+    }
+
     for (i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) {
         g_autofree char *name = g_strdup_printf("usdhc%d", i + 1);
         object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC);
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
                                 fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr,
                                 &s->ocram);
 
+    /* GPIOs */
+    for (i = 0; i < FSL_IMX8MM_NUM_GPIOS; i++) {
+        static const struct {
+            hwaddr addr;
+            unsigned int irq_low;
+            unsigned int irq_high;
+        } gpio_table[FSL_IMX8MM_NUM_GPIOS] = {
+            {
+                fsl_imx8mm_memmap[FSL_IMX8MM_GPIO1].addr,
+                FSL_IMX8MM_GPIO1_LOW_IRQ,
+                FSL_IMX8MM_GPIO1_HIGH_IRQ
+            },
+            {
+                fsl_imx8mm_memmap[FSL_IMX8MM_GPIO2].addr,
+                FSL_IMX8MM_GPIO2_LOW_IRQ,
+                FSL_IMX8MM_GPIO2_HIGH_IRQ
+            },
+            {
+                fsl_imx8mm_memmap[FSL_IMX8MM_GPIO3].addr,
+                FSL_IMX8MM_GPIO3_LOW_IRQ,
+                FSL_IMX8MM_GPIO3_HIGH_IRQ
+            },
+            {
+                fsl_imx8mm_memmap[FSL_IMX8MM_GPIO4].addr,
+                FSL_IMX8MM_GPIO4_LOW_IRQ,
+                FSL_IMX8MM_GPIO4_HIGH_IRQ
+            },
+            {
+                fsl_imx8mm_memmap[FSL_IMX8MM_GPIO5].addr,
+                FSL_IMX8MM_GPIO5_LOW_IRQ,
+                FSL_IMX8MM_GPIO5_HIGH_IRQ
+            },
+        };
+        object_property_set_bool(OBJECT(&s->gpio[i]), "has-edge-sel", true,
+                                 &error_abort);
+        object_property_set_bool(OBJECT(&s->gpio[i]), "has-upper-pin-irq",
+                                 true, &error_abort);
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpio[i]), errp)) {
+            return;
+        }
+
+        sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio[i]), 0, gpio_table[i].addr);
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 0,
+                           qdev_get_gpio_in(gicdev, gpio_table[i].irq_low));
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 1,
+                           qdev_get_gpio_in(gicdev, gpio_table[i].irq_high));
+    }
+
     /* USDHCs */
     for (i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) {
         static const struct {
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
         case FSL_IMX8MM_CCM:
         case FSL_IMX8MM_GIC_DIST:
         case FSL_IMX8MM_GIC_REDIST:
+        case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5:
         case FSL_IMX8MM_PCIE1:
         case FSL_IMX8MM_PCIE_PHY1:
         case FSL_IMX8MM_RAM:
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx8mm.h
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -XXX,XX +XXX,XX @@
 
 #include "cpu.h"
 #include "hw/char/imx_serial.h"
+#include "hw/gpio/imx_gpio.h"
 #include "hw/intc/arm_gicv3_common.h"
 #include "hw/misc/imx7_snvs.h"
 #include "hw/misc/imx8mp_analog.h"
@@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(FslImx8mmState, FSL_IMX8MM)
 
 enum FslImx8mmConfiguration {
     FSL_IMX8MM_NUM_CPUS         = 4,
+    FSL_IMX8MM_NUM_GPIOS        = 5,
     FSL_IMX8MM_NUM_IRQS         = 128,
     FSL_IMX8MM_NUM_UARTS        = 4,
     FSL_IMX8MM_NUM_USDHCS       = 3,
@@ -XXX,XX +XXX,XX @@ struct FslImx8mmState {
 
     ARMCPU             cpu[FSL_IMX8MM_NUM_CPUS];
     GICv3State         gic;
+    IMXGPIOState       gpio[FSL_IMX8MM_NUM_GPIOS];
     IMX8MPCCMState     ccm;
     IMX8MPAnalogState  analog;
     IMX7SNVSState      snvs;
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs {
     FSL_IMX8MM_UART3_IRQ    = 28,
     FSL_IMX8MM_UART4_IRQ    = 29,
 
+    FSL_IMX8MM_GPIO1_LOW_IRQ  = 64,
+    FSL_IMX8MM_GPIO1_HIGH_IRQ = 65,
+    FSL_IMX8MM_GPIO2_LOW_IRQ  = 66,
+    FSL_IMX8MM_GPIO2_HIGH_IRQ = 67,
+    FSL_IMX8MM_GPIO3_LOW_IRQ  = 68,
+    FSL_IMX8MM_GPIO3_HIGH_IRQ = 69,
+    FSL_IMX8MM_GPIO4_LOW_IRQ  = 70,
+    FSL_IMX8MM_GPIO4_HIGH_IRQ = 71,
+    FSL_IMX8MM_GPIO5_LOW_IRQ  = 72,
+    FSL_IMX8MM_GPIO5_HIGH_IRQ = 73,
+
     FSL_IMX8MM_PCI_INTA_IRQ = 122,
     FSL_IMX8MM_PCI_INTB_IRQ = 123,
     FSL_IMX8MM_PCI_INTC_IRQ = 124,
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

This can be used to test and debug I2C device drivers.
Added I2C interrupts

Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/Kconfig              |  2 ++
 hw/arm/fsl-imx8mm.c         | 27 +++++++++++++++++++++++++++
 include/hw/arm/fsl-imx8mm.h |  8 ++++++++
 3 files changed, 37 insertions(+)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -XXX,XX +XXX,XX @@ config FSL_IMX8MP_EVK
 config FSL_IMX8MM
     bool
     imply PCI_DEVICES
+    imply I2C_DEVICES
     select ARM_GIC
     select FSL_IMX8MP_ANALOG
     select FSL_IMX8MP_CCM
     select IMX
+    select IMX_I2C
     select SDHCI
     select PCI_EXPRESS_DESIGNWARE
     select PCI_EXPRESS_FSL_IMX8M_PHY
diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx8mm.c
+++ b/hw/arm/fsl-imx8mm.c
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj)
         object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL);
     }
 
+    for (i = 0; i < FSL_IMX8MM_NUM_I2CS; i++) {
+        g_autofree char *name = g_strdup_printf("i2c%d", i + 1);
+        object_initialize_child(obj, name, &s->i2c[i], TYPE_IMX_I2C);
+    }
+
     for (i = 0; i < FSL_IMX8MM_NUM_GPIOS; i++) {
         g_autofree char *name = g_strdup_printf("gpio%d", i + 1);
         object_initialize_child(obj, name, &s->gpio[i], TYPE_IMX_GPIO);
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
                                 fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr,
                                 &s->ocram);
 
+    /* I2Cs */
+    for (i = 0; i < FSL_IMX8MM_NUM_I2CS; i++) {
+        static const struct {
+            hwaddr addr;
+            unsigned int irq;
+        } i2c_table[FSL_IMX8MM_NUM_I2CS] = {
+            { fsl_imx8mm_memmap[FSL_IMX8MM_I2C1].addr, FSL_IMX8MM_I2C1_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_I2C2].addr, FSL_IMX8MM_I2C2_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_I2C3].addr, FSL_IMX8MM_I2C3_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_I2C4].addr, FSL_IMX8MM_I2C4_IRQ },
+        };
+
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->i2c[i]), errp)) {
+            return;
+        }
+
+        sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c[i]), 0, i2c_table[i].addr);
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c[i]), 0,
+                           qdev_get_gpio_in(gicdev, i2c_table[i].irq));
+    }
+
     /* GPIOs */
     for (i = 0; i < FSL_IMX8MM_NUM_GPIOS; i++) {
         static const struct {
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
         case FSL_IMX8MM_GIC_DIST:
         case FSL_IMX8MM_GIC_REDIST:
         case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5:
+        case FSL_IMX8MM_I2C1 ... FSL_IMX8MM_I2C4:
         case FSL_IMX8MM_PCIE1:
         case FSL_IMX8MM_PCIE_PHY1:
         case FSL_IMX8MM_RAM:
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx8mm.h
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -XXX,XX +XXX,XX @@
 #include "cpu.h"
 #include "hw/char/imx_serial.h"
 #include "hw/gpio/imx_gpio.h"
+#include "hw/i2c/imx_i2c.h"
 #include "hw/intc/arm_gicv3_common.h"
 #include "hw/misc/imx7_snvs.h"
 #include "hw/misc/imx8mp_analog.h"
@@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(FslImx8mmState, FSL_IMX8MM)
 enum FslImx8mmConfiguration {
     FSL_IMX8MM_NUM_CPUS         = 4,
     FSL_IMX8MM_NUM_GPIOS        = 5,
+    FSL_IMX8MM_NUM_I2CS         = 4,
     FSL_IMX8MM_NUM_IRQS         = 128,
     FSL_IMX8MM_NUM_UARTS        = 4,
     FSL_IMX8MM_NUM_USDHCS       = 3,
@@ -XXX,XX +XXX,XX @@ struct FslImx8mmState {
     IMX8MPCCMState     ccm;
     IMX8MPAnalogState  analog;
     IMX7SNVSState      snvs;
+    IMXI2CState        i2c[FSL_IMX8MM_NUM_I2CS];
     IMXSerialState     uart[FSL_IMX8MM_NUM_UARTS];
     MemoryRegion ocram;
     SDHCIState         usdhc[FSL_IMX8MM_NUM_USDHCS];
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs {
     FSL_IMX8MM_UART3_IRQ    = 28,
     FSL_IMX8MM_UART4_IRQ    = 29,
 
+    FSL_IMX8MM_I2C1_IRQ     = 35,
+    FSL_IMX8MM_I2C2_IRQ     = 36,
+    FSL_IMX8MM_I2C3_IRQ     = 37,
+    FSL_IMX8MM_I2C4_IRQ     = 38,
+
     FSL_IMX8MM_GPIO1_LOW_IRQ  = 64,
     FSL_IMX8MM_GPIO1_HIGH_IRQ = 65,
     FSL_IMX8MM_GPIO2_LOW_IRQ  = 66,
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

It enables emulation of ECSPI in iMX8MM
Added SPI IRQ lines

Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/fsl-imx8mm.c         | 26 ++++++++++++++++++++++++++
 include/hw/arm/fsl-imx8mm.h |  7 +++++++
 2 files changed, 33 insertions(+)

diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx8mm.c
+++ b/hw/arm/fsl-imx8mm.c
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj)
         object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC);
     }
 
+    for (i = 0; i < FSL_IMX8MM_NUM_ECSPIS; i++) {
+        g_autofree char *name = g_strdup_printf("spi%d", i + 1);
+        object_initialize_child(obj, name, &s->spi[i], TYPE_IMX_SPI);
+    }
+
     object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST);
     object_initialize_child(obj, "pcie_phy", &s->pcie_phy,
                             TYPE_FSL_IMX8M_PCIE_PHY);
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
                            qdev_get_gpio_in(gicdev, usdhc_table[i].irq));
     }
 
+    /* ECSPIs */
+    for (i = 0; i < FSL_IMX8MM_NUM_ECSPIS; i++) {
+        static const struct {
+            hwaddr addr;
+            unsigned int irq;
+        } spi_table[FSL_IMX8MM_NUM_ECSPIS] = {
+            { fsl_imx8mm_memmap[FSL_IMX8MM_ECSPI1].addr, FSL_IMX8MM_ECSPI1_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_ECSPI2].addr, FSL_IMX8MM_ECSPI2_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_ECSPI3].addr, FSL_IMX8MM_ECSPI3_IRQ },
+        };
+
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->spi[i]), errp)) {
+            return;
+        }
+
+        sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0, spi_table[i].addr);
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0,
+                           qdev_get_gpio_in(gicdev, spi_table[i].irq));
+    }
+
     /* SNVS */
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->snvs), errp)) {
         return;
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
         case FSL_IMX8MM_GIC_DIST:
         case FSL_IMX8MM_GIC_REDIST:
         case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5:
+        case FSL_IMX8MM_ECSPI1 ... FSL_IMX8MM_ECSPI3:
         case FSL_IMX8MM_I2C1 ... FSL_IMX8MM_I2C4:
         case FSL_IMX8MM_PCIE1:
         case FSL_IMX8MM_PCIE_PHY1:
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx8mm.h
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -XXX,XX +XXX,XX @@
 #include "hw/pci-host/designware.h"
 #include "hw/pci-host/fsl_imx8m_phy.h"
 #include "hw/sd/sdhci.h"
+#include "hw/ssi/imx_spi.h"
 #include "qom/object.h"
 #include "qemu/units.h"
 
@@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(FslImx8mmState, FSL_IMX8MM)
 
 enum FslImx8mmConfiguration {
     FSL_IMX8MM_NUM_CPUS         = 4,
+    FSL_IMX8MM_NUM_ECSPIS       = 3,
     FSL_IMX8MM_NUM_GPIOS        = 5,
     FSL_IMX8MM_NUM_I2CS         = 4,
     FSL_IMX8MM_NUM_IRQS         = 128,
@@ -XXX,XX +XXX,XX @@ struct FslImx8mmState {
     IMX8MPCCMState     ccm;
     IMX8MPAnalogState  analog;
     IMX7SNVSState      snvs;
+    IMXSPIState        spi[FSL_IMX8MM_NUM_ECSPIS];
     IMXI2CState        i2c[FSL_IMX8MM_NUM_I2CS];
     IMXSerialState     uart[FSL_IMX8MM_NUM_UARTS];
     MemoryRegion ocram;
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs {
     FSL_IMX8MM_UART3_IRQ    = 28,
     FSL_IMX8MM_UART4_IRQ    = 29,
 
+    FSL_IMX8MM_ECSPI1_IRQ   = 31,
+    FSL_IMX8MM_ECSPI2_IRQ   = 32,
+    FSL_IMX8MM_ECSPI3_IRQ   = 33,
+
     FSL_IMX8MM_I2C1_IRQ     = 35,
     FSL_IMX8MM_I2C2_IRQ     = 36,
     FSL_IMX8MM_I2C3_IRQ     = 37,
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

It enables emulation of WDT in iMX8MM
Added WDT IRQ lines

Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/Kconfig              |  1 +
 hw/arm/fsl-imx8mm.c         | 28 ++++++++++++++++++++++++++++
 include/hw/arm/fsl-imx8mm.h |  7 +++++++
 3 files changed, 36 insertions(+)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM
     select SDHCI
     select PCI_EXPRESS_DESIGNWARE
     select PCI_EXPRESS_FSL_IMX8M_PHY
+    select WDT_IMX2
 
 config FSL_IMX8MM_EVK
     bool
diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx8mm.c
+++ b/hw/arm/fsl-imx8mm.c
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj)
         object_initialize_child(obj, name, &s->spi[i], TYPE_IMX_SPI);
     }
 
+    for (i = 0; i < FSL_IMX8MM_NUM_WDTS; i++) {
+        g_autofree char *name = g_strdup_printf("wdt%d", i);
+        object_initialize_child(obj, name, &s->wdt[i], TYPE_IMX2_WDT);
+    }
+
     object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST);
     object_initialize_child(obj, "pcie_phy", &s->pcie_phy,
                             TYPE_FSL_IMX8M_PCIE_PHY);
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
     sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0,
                     fsl_imx8mm_memmap[FSL_IMX8MM_SNVS_HP].addr);
 
+    /* Watchdogs */
+    for (i = 0; i < FSL_IMX8MM_NUM_WDTS; i++) {
+        static const struct {
+            hwaddr addr;
+            unsigned int irq;
+        } wdog_table[FSL_IMX8MM_NUM_WDTS] = {
+            { fsl_imx8mm_memmap[FSL_IMX8MM_WDOG1].addr, FSL_IMX8MM_WDOG1_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_WDOG2].addr, FSL_IMX8MM_WDOG2_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_WDOG3].addr, FSL_IMX8MM_WDOG3_IRQ },
+        };
+
+        object_property_set_bool(OBJECT(&s->wdt[i]), "pretimeout-support",
+                                 true, &error_abort);
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->wdt[i]), errp)) {
+            return;
+        }
+
+        sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[i]), 0, wdog_table[i].addr);
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->wdt[i]), 0,
+                           qdev_get_gpio_in(gicdev, wdog_table[i].irq));
+    }
+
     /* PCIe */
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->pcie), errp)) {
         return;
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
         case FSL_IMX8MM_SNVS_HP:
         case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4:
         case FSL_IMX8MM_USDHC1 ... FSL_IMX8MM_USDHC3:
+        case FSL_IMX8MM_WDOG1 ... FSL_IMX8MM_WDOG3:
             /* device implemented and treated above */
             break;
 
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx8mm.h
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -XXX,XX +XXX,XX @@
 #include "hw/pci-host/fsl_imx8m_phy.h"
 #include "hw/sd/sdhci.h"
 #include "hw/ssi/imx_spi.h"
+#include "hw/watchdog/wdt_imx2.h"
 #include "qom/object.h"
 #include "qemu/units.h"
 
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmConfiguration {
     FSL_IMX8MM_NUM_IRQS         = 128,
     FSL_IMX8MM_NUM_UARTS        = 4,
     FSL_IMX8MM_NUM_USDHCS       = 3,
+    FSL_IMX8MM_NUM_WDTS         = 3,
 };
 
 struct FslImx8mmState {
@@ -XXX,XX +XXX,XX @@ struct FslImx8mmState {
     IMXSerialState     uart[FSL_IMX8MM_NUM_UARTS];
     MemoryRegion ocram;
     SDHCIState         usdhc[FSL_IMX8MM_NUM_USDHCS];
+    IMX2WdtState       wdt[FSL_IMX8MM_NUM_WDTS];
     DesignwarePCIEHost pcie;
     FslImx8mPciePhyState   pcie_phy;
 };
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs {
     FSL_IMX8MM_GPIO5_LOW_IRQ  = 72,
     FSL_IMX8MM_GPIO5_HIGH_IRQ = 73,
 
+    FSL_IMX8MM_WDOG1_IRQ    = 78,
+    FSL_IMX8MM_WDOG2_IRQ    = 79,
+    FSL_IMX8MM_WDOG3_IRQ    = 10,
+
     FSL_IMX8MM_PCI_INTA_IRQ = 122,
     FSL_IMX8MM_PCI_INTB_IRQ = 123,
     FSL_IMX8MM_PCI_INTC_IRQ = 124,
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

It enables emulation of GPT in iMX8MM
Added GPT IRQ lines

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/Kconfig              |  1 +
 hw/arm/fsl-imx8mm.c         | 54 +++++++++++++++++++++++++++++++++++++
 hw/timer/imx_gpt.c          | 26 ++++++++++++++++++
 include/hw/arm/fsl-imx8mm.h | 11 ++++++++
 include/hw/timer/imx_gpt.h  |  2 ++
 5 files changed, 94 insertions(+)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM
     select FSL_IMX8MP_CCM
     select IMX
     select IMX_I2C
+    select OR_IRQ
     select SDHCI
     select PCI_EXPRESS_DESIGNWARE
     select PCI_EXPRESS_FSL_IMX8M_PHY
diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx8mm.c
+++ b/hw/arm/fsl-imx8mm.c
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj)
         object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL);
     }
 
+    for (i = 0; i < FSL_IMX8MM_NUM_GPTS; i++) {
+        g_autofree char *name = g_strdup_printf("gpt%d", i + 1);
+        object_initialize_child(obj, name, &s->gpt[i], TYPE_IMX8MM_GPT);
+    }
+    object_initialize_child(obj, "gpt5-gpt6-irq", &s->gpt5_gpt6_irq,
+                            TYPE_OR_IRQ);
+
     for (i = 0; i < FSL_IMX8MM_NUM_I2CS; i++) {
         g_autofree char *name = g_strdup_printf("i2c%d", i + 1);
         object_initialize_child(obj, name, &s->i2c[i], TYPE_IMX_I2C);
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
                                 fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr,
                                 &s->ocram);
 
+    /* GPTs */
+    object_property_set_int(OBJECT(&s->gpt5_gpt6_irq), "num-lines", 2,
+                            &error_abort);
+    if (!qdev_realize(DEVICE(&s->gpt5_gpt6_irq), NULL, errp)) {
+        return;
+    }
+
+    qdev_connect_gpio_out(DEVICE(&s->gpt5_gpt6_irq), 0,
+                          qdev_get_gpio_in(gicdev, FSL_IMX8MM_GPT5_GPT6_IRQ));
+
+    for (i = 0; i < FSL_IMX8MM_NUM_GPTS; i++) {
+        hwaddr gpt_addrs[FSL_IMX8MM_NUM_GPTS] = {
+            fsl_imx8mm_memmap[FSL_IMX8MM_GPT1].addr,
+            fsl_imx8mm_memmap[FSL_IMX8MM_GPT2].addr,
+            fsl_imx8mm_memmap[FSL_IMX8MM_GPT3].addr,
+            fsl_imx8mm_memmap[FSL_IMX8MM_GPT4].addr,
+            fsl_imx8mm_memmap[FSL_IMX8MM_GPT5].addr,
+            fsl_imx8mm_memmap[FSL_IMX8MM_GPT6].addr,
+        };
+
+        s->gpt[i].ccm = IMX_CCM(&s->ccm);
+
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpt[i]), errp)) {
+            return;
+        }
+
+        sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpt[i]), 0, gpt_addrs[i]);
+
+        if (i < FSL_IMX8MM_NUM_GPTS - 2) {
+            static const unsigned int gpt_irqs[FSL_IMX8MM_NUM_GPTS - 2] = {
+                FSL_IMX8MM_GPT1_IRQ,
+                FSL_IMX8MM_GPT2_IRQ,
+                FSL_IMX8MM_GPT3_IRQ,
+                FSL_IMX8MM_GPT4_IRQ,
+            };
+
+            sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpt[i]), 0,
+                               qdev_get_gpio_in(gicdev, gpt_irqs[i]));
+        } else {
+            int irq = i - FSL_IMX8MM_NUM_GPTS + 2;
+
+            sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpt[i]), 0,
+                               qdev_get_gpio_in(DEVICE(&s->gpt5_gpt6_irq), irq));
+        }
+    }
+
     /* I2Cs */
     for (i = 0; i < FSL_IMX8MM_NUM_I2CS; i++) {
         static const struct {
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
         case FSL_IMX8MM_GIC_DIST:
         case FSL_IMX8MM_GIC_REDIST:
         case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5:
+        case FSL_IMX8MM_GPT1 ... FSL_IMX8MM_GPT6:
         case FSL_IMX8MM_ECSPI1 ... FSL_IMX8MM_ECSPI3:
         case FSL_IMX8MM_I2C1 ... FSL_IMX8MM_I2C4:
         case FSL_IMX8MM_PCIE1:
diff --git a/hw/timer/imx_gpt.c b/hw/timer/imx_gpt.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/timer/imx_gpt.c
+++ b/hw/timer/imx_gpt.c
@@ -XXX,XX +XXX,XX @@
  * Originally written by Hans Jiang
  * Updated by Peter Chubb
  * Updated by Jean-Christophe Dubois <jcd@tribudubois.net>
+ * Updated by Gaurav Sharma <gaurav.sharma_7@nxp.com>
  *
  * This code is licensed under GPL version 2 or later.  See
  * the COPYING file in the top-level directory.
@@ -XXX,XX +XXX,XX @@ static const IMXClk imx8mp_gpt_clocks[] = {
     CLK_NONE,      /* 111 not defined */
 };
 
+static const IMXClk imx8mm_gpt_clocks[] = {
+    CLK_NONE,      /* 000 No clock source */
+    CLK_IPG,       /* 001 ipg_clk, 532MHz */
+    CLK_IPG_HIGH,  /* 010 ipg_clk_highfreq */
+    CLK_EXT,       /* 011 External clock */
+    CLK_32k,       /* 100 ipg_clk_32k */
+    CLK_HIGH,      /* 101 ipg_clk_16M */
+    CLK_NONE,      /* 110 not defined */
+    CLK_NONE,      /* 111 not defined */
+};
+
 /* Must be called from within ptimer_transaction_begin/commit block */
 static void imx_gpt_set_freq(IMXGPTState *s)
 {
@@ -XXX,XX +XXX,XX @@ static void imx8mp_gpt_init(Object *obj)
     s->clocks = imx8mp_gpt_clocks;
 }
 
+static void imx8mm_gpt_init(Object *obj)
+{
+    IMXGPTState *s = IMX_GPT(obj);
+
+    s->clocks = imx8mm_gpt_clocks;
+}
+
 static const TypeInfo imx25_gpt_info = {
     .name = TYPE_IMX25_GPT,
     .parent = TYPE_SYS_BUS_DEVICE,
@@ -XXX,XX +XXX,XX @@ static const TypeInfo imx8mp_gpt_info = {
     .instance_init = imx8mp_gpt_init,
 };
 
+static const TypeInfo imx8mm_gpt_info = {
+    .name = TYPE_IMX8MM_GPT,
+    .parent = TYPE_IMX25_GPT,
+    .instance_init = imx8mm_gpt_init,
+};
+
 static void imx_gpt_register_types(void)
 {
     type_register_static(&imx25_gpt_info);
@@ -XXX,XX +XXX,XX @@ static void imx_gpt_register_types(void)
     type_register_static(&imx6ul_gpt_info);
     type_register_static(&imx7_gpt_info);
     type_register_static(&imx8mp_gpt_info);
+    type_register_static(&imx8mm_gpt_info);
 }
 
 type_init(imx_gpt_register_types)
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx8mm.h
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -XXX,XX +XXX,XX @@
 #include "hw/misc/imx7_snvs.h"
 #include "hw/misc/imx8mp_analog.h"
 #include "hw/misc/imx8mp_ccm.h"
+#include "hw/or-irq.h"
 #include "hw/pci-host/designware.h"
 #include "hw/pci-host/fsl_imx8m_phy.h"
 #include "hw/sd/sdhci.h"
 #include "hw/ssi/imx_spi.h"
+#include "hw/timer/imx_gpt.h"
 #include "hw/watchdog/wdt_imx2.h"
 #include "qom/object.h"
 #include "qemu/units.h"
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmConfiguration {
     FSL_IMX8MM_NUM_CPUS         = 4,
     FSL_IMX8MM_NUM_ECSPIS       = 3,
     FSL_IMX8MM_NUM_GPIOS        = 5,
+    FSL_IMX8MM_NUM_GPTS         = 6,
     FSL_IMX8MM_NUM_I2CS         = 4,
     FSL_IMX8MM_NUM_IRQS         = 128,
     FSL_IMX8MM_NUM_UARTS        = 4,
@@ -XXX,XX +XXX,XX @@ struct FslImx8mmState {
 
     ARMCPU             cpu[FSL_IMX8MM_NUM_CPUS];
     GICv3State         gic;
+    IMXGPTState        gpt[FSL_IMX8MM_NUM_GPTS];
     IMXGPIOState       gpio[FSL_IMX8MM_NUM_GPIOS];
     IMX8MPCCMState     ccm;
     IMX8MPAnalogState  analog;
@@ -XXX,XX +XXX,XX @@ struct FslImx8mmState {
     IMX2WdtState       wdt[FSL_IMX8MM_NUM_WDTS];
     DesignwarePCIEHost pcie;
     FslImx8mPciePhyState   pcie_phy;
+    OrIRQState         gpt5_gpt6_irq;
 };
 
 enum FslImx8mmMemoryRegions {
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs {
     FSL_IMX8MM_I2C3_IRQ     = 37,
     FSL_IMX8MM_I2C4_IRQ     = 38,
 
+    FSL_IMX8MM_GPT1_IRQ      = 55,
+    FSL_IMX8MM_GPT2_IRQ      = 54,
+    FSL_IMX8MM_GPT3_IRQ      = 53,
+    FSL_IMX8MM_GPT4_IRQ      = 52,
+    FSL_IMX8MM_GPT5_GPT6_IRQ = 51,
+
     FSL_IMX8MM_GPIO1_LOW_IRQ  = 64,
     FSL_IMX8MM_GPIO1_HIGH_IRQ = 65,
     FSL_IMX8MM_GPIO2_LOW_IRQ  = 66,
diff --git a/include/hw/timer/imx_gpt.h b/include/hw/timer/imx_gpt.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/timer/imx_gpt.h
+++ b/include/hw/timer/imx_gpt.h
@@ -XXX,XX +XXX,XX @@
  * Originally written by Hans Jiang
  * Updated by Peter Chubb
  * Updated by Jean-Christophe Dubois <jcd@tribudubois.net>
+ * Updated by Gaurav Sharma <gaurav.sharma_7@nxp.com>
  *
  * Permission is hereby granted, free of charge, to any person obtaining a copy
  * of this software and associated documentation files (the "Software"), to deal
@@ -XXX,XX +XXX,XX @@
 #define TYPE_IMX6UL_GPT "imx6ul.gpt"
 #define TYPE_IMX7_GPT "imx7.gpt"
 #define TYPE_IMX8MP_GPT "imx8mp.gpt"
+#define TYPE_IMX8MM_GPT "imx8mm.gpt"
 
 #define TYPE_IMX_GPT TYPE_IMX25_GPT
 
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

It enables emulation of ENET ethernet controller in iMX8MM
Enables testing and debugging of network dependent drivers
Added ENET MAC IRQ lines

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/Kconfig              |  1 +
 hw/arm/fsl-imx8mm.c         | 24 ++++++++++++++++++++++++
 hw/arm/imx8mm-evk.c         |  1 +
 include/hw/arm/fsl-imx8mm.h | 10 +++++++++-
 4 files changed, 35 insertions(+), 1 deletion(-)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM
     select FSL_IMX8MP_ANALOG
     select FSL_IMX8MP_CCM
     select IMX
+    select IMX_FEC
     select IMX_I2C
     select OR_IRQ
     select SDHCI
diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx8mm.c
+++ b/hw/arm/fsl-imx8mm.c
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj)
         object_initialize_child(obj, name, &s->wdt[i], TYPE_IMX2_WDT);
     }
 
+    object_initialize_child(obj, "eth0", &s->enet, TYPE_IMX_ENET);
+
     object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST);
     object_initialize_child(obj, "pcie_phy", &s->pcie_phy,
                             TYPE_FSL_IMX8M_PCIE_PHY);
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
                            qdev_get_gpio_in(gicdev, spi_table[i].irq));
     }
 
+    /* ENET1 */
+    object_property_set_uint(OBJECT(&s->enet), "phy-num", s->phy_num,
+                             &error_abort);
+    object_property_set_uint(OBJECT(&s->enet), "tx-ring-num", 3, &error_abort);
+    qemu_configure_nic_device(DEVICE(&s->enet), true, NULL);
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->enet), errp)) {
+        return;
+    }
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->enet), 0,
+                    fsl_imx8mm_memmap[FSL_IMX8MM_ENET1].addr);
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->enet), 0,
+                       qdev_get_gpio_in(gicdev, FSL_IMX8MM_ENET1_MAC_IRQ));
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->enet), 1,
+                       qdev_get_gpio_in(gicdev, FSL_IMX6_ENET1_MAC_1588_IRQ));
+
     /* SNVS */
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->snvs), errp)) {
         return;
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
         case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5:
         case FSL_IMX8MM_GPT1 ... FSL_IMX8MM_GPT6:
         case FSL_IMX8MM_ECSPI1 ... FSL_IMX8MM_ECSPI3:
+        case FSL_IMX8MM_ENET1:
         case FSL_IMX8MM_I2C1 ... FSL_IMX8MM_I2C4:
         case FSL_IMX8MM_PCIE1:
         case FSL_IMX8MM_PCIE_PHY1:
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
     }
 }
 
+static const Property fsl_imx8mm_properties[] = {
+    DEFINE_PROP_UINT32("fec1-phy-num", FslImx8mmState, phy_num, 0),
+    DEFINE_PROP_BOOL("fec1-phy-connected", FslImx8mmState, phy_connected, true),
+};
+
 static void fsl_imx8mm_class_init(ObjectClass *oc, const void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(oc);
 
+    device_class_set_props(dc, fsl_imx8mm_properties);
     dc->realize = fsl_imx8mm_realize;
 
     dc->desc = "i.MX 8MM SoC";
diff --git a/hw/arm/imx8mm-evk.c b/hw/arm/imx8mm-evk.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/imx8mm-evk.c
+++ b/hw/arm/imx8mm-evk.c
@@ -XXX,XX +XXX,XX @@ static void imx8mm_evk_init(MachineState *machine)
 
     s = FSL_IMX8MM(object_new_with_props(TYPE_FSL_IMX8MM, OBJECT(machine),
                                          "soc", &error_fatal, NULL));
+    object_property_set_uint(OBJECT(s), "fec1-phy-num", 1, &error_fatal);
     sysbus_realize_and_unref(SYS_BUS_DEVICE(s), &error_fatal);
 
     memory_region_add_subregion(get_system_memory(), FSL_IMX8MM_RAM_START,
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx8mm.h
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -XXX,XX +XXX,XX @@
 #include "hw/misc/imx7_snvs.h"
 #include "hw/misc/imx8mp_analog.h"
 #include "hw/misc/imx8mp_ccm.h"
-#include "hw/or-irq.h"
+#include "hw/net/imx_fec.h"
+#include "hw/core/or-irq.h"
 #include "hw/pci-host/designware.h"
 #include "hw/pci-host/fsl_imx8m_phy.h"
 #include "hw/sd/sdhci.h"
@@ -XXX,XX +XXX,XX @@ struct FslImx8mmState {
     IMXI2CState        i2c[FSL_IMX8MM_NUM_I2CS];
     IMXSerialState     uart[FSL_IMX8MM_NUM_UARTS];
     MemoryRegion ocram;
+    IMXFECState        enet;
     SDHCIState         usdhc[FSL_IMX8MM_NUM_USDHCS];
     IMX2WdtState       wdt[FSL_IMX8MM_NUM_WDTS];
     DesignwarePCIEHost pcie;
     FslImx8mPciePhyState   pcie_phy;
     OrIRQState         gpt5_gpt6_irq;
+
+    uint32_t           phy_num;
+    bool               phy_connected;
 };
 
 enum FslImx8mmMemoryRegions {
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs {
     FSL_IMX8MM_WDOG2_IRQ    = 79,
     FSL_IMX8MM_WDOG3_IRQ    = 10,
 
+    FSL_IMX8MM_ENET1_MAC_IRQ    = 118,
+    FSL_IMX6_ENET1_MAC_1588_IRQ = 121,
+
     FSL_IMX8MM_PCI_INTA_IRQ = 122,
     FSL_IMX8MM_PCI_INTB_IRQ = 123,
     FSL_IMX8MM_PCI_INTC_IRQ = 124,
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

It enables emulation of USB on iMX8MM
Enables testing and debugging of USB drivers

Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/Kconfig              |  1 +
 hw/arm/fsl-imx8mm.c         | 27 +++++++++++++++++++++++++++
 include/hw/arm/fsl-imx8mm.h |  6 ++++++
 3 files changed, 34 insertions(+)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM
     select SDHCI
     select PCI_EXPRESS_DESIGNWARE
     select PCI_EXPRESS_FSL_IMX8M_PHY
+    select USB_DWC3
     select WDT_IMX2
 
 config FSL_IMX8MM_EVK
diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx8mm.c
+++ b/hw/arm/fsl-imx8mm.c
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj)
         object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC);
     }
 
+    for (i = 0; i < FSL_IMX8MM_NUM_USBS; i++) {
+        g_autofree char *name = g_strdup_printf("usb%d", i);
+        object_initialize_child(obj, name, &s->usb[i], TYPE_USB_DWC3);
+    }
+
     for (i = 0; i < FSL_IMX8MM_NUM_ECSPIS; i++) {
         g_autofree char *name = g_strdup_printf("spi%d", i + 1);
         object_initialize_child(obj, name, &s->spi[i], TYPE_IMX_SPI);
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
                            qdev_get_gpio_in(gicdev, usdhc_table[i].irq));
     }
 
+    /* USBs */
+    for (i = 0; i < FSL_IMX8MM_NUM_USBS; i++) {
+        static const struct {
+            hwaddr addr;
+            unsigned int irq;
+        } usb_table[FSL_IMX8MM_NUM_USBS] = {
+            { fsl_imx8mm_memmap[FSL_IMX8MM_USB1].addr, FSL_IMX8MM_USB1_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_USB2].addr, FSL_IMX8MM_USB2_IRQ },
+        };
+
+        qdev_prop_set_uint32(DEVICE(&s->usb[i].sysbus_xhci), "p2", 1);
+        qdev_prop_set_uint32(DEVICE(&s->usb[i].sysbus_xhci), "p3", 1);
+        qdev_prop_set_uint32(DEVICE(&s->usb[i].sysbus_xhci), "slots", 2);
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->usb[i]), errp)) {
+            return;
+        }
+        sysbus_mmio_map(SYS_BUS_DEVICE(&s->usb[i]), 0, usb_table[i].addr);
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->usb[i].sysbus_xhci), 0,
+                           qdev_get_gpio_in(gicdev, usb_table[i].irq));
+    }
+
     /* ECSPIs */
     for (i = 0; i < FSL_IMX8MM_NUM_ECSPIS; i++) {
         static const struct {
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
         case FSL_IMX8MM_OCRAM:
         case FSL_IMX8MM_SNVS_HP:
         case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4:
+        case FSL_IMX8MM_USB1 ... FSL_IMX8MM_USB2:
         case FSL_IMX8MM_USDHC1 ... FSL_IMX8MM_USDHC3:
         case FSL_IMX8MM_WDOG1 ... FSL_IMX8MM_WDOG3:
             /* device implemented and treated above */
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx8mm.h
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -XXX,XX +XXX,XX @@
 #include "hw/sd/sdhci.h"
 #include "hw/ssi/imx_spi.h"
 #include "hw/timer/imx_gpt.h"
+#include "hw/usb/hcd-dwc3.h"
 #include "hw/watchdog/wdt_imx2.h"
 #include "qom/object.h"
 #include "qemu/units.h"
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmConfiguration {
     FSL_IMX8MM_NUM_I2CS         = 4,
     FSL_IMX8MM_NUM_IRQS         = 128,
     FSL_IMX8MM_NUM_UARTS        = 4,
+    FSL_IMX8MM_NUM_USBS         = 2,
     FSL_IMX8MM_NUM_USDHCS       = 3,
     FSL_IMX8MM_NUM_WDTS         = 3,
 };
@@ -XXX,XX +XXX,XX @@ struct FslImx8mmState {
     IMXFECState        enet;
     SDHCIState         usdhc[FSL_IMX8MM_NUM_USDHCS];
     IMX2WdtState       wdt[FSL_IMX8MM_NUM_WDTS];
+    USBDWC3            usb[FSL_IMX8MM_NUM_USBS];
     DesignwarePCIEHost pcie;
     FslImx8mPciePhyState   pcie_phy;
     OrIRQState         gpt5_gpt6_irq;
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs {
     FSL_IMX8MM_I2C3_IRQ     = 37,
     FSL_IMX8MM_I2C4_IRQ     = 38,
 
+    FSL_IMX8MM_USB1_IRQ     = 40,
+    FSL_IMX8MM_USB2_IRQ     = 41,
+
     FSL_IMX8MM_GPT1_IRQ      = 55,
     FSL_IMX8MM_GPT2_IRQ      = 54,
     FSL_IMX8MM_GPT3_IRQ      = 53,
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

Added script that would validate the iMX8MM emulation by checking the
linux console log. If it succeeds, it will return:-

ok 1 test_imx8mm_evk.Imx8mmEvkMachine.test_aarch64_imx8mm_evk_usdhc

Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
[PMM: Add missing blank lines that flake8 wants]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 MAINTAINERS                                 |  1 +
 tests/functional/aarch64/meson.build        |  2 +
 tests/functional/aarch64/test_imx8mm_evk.py | 69 +++++++++++++++++++++
 3 files changed, 72 insertions(+)
 create mode 100755 tests/functional/aarch64/test_imx8mm_evk.py

diff --git a/MAINTAINERS b/MAINTAINERS
index XXXXXXX..XXXXXXX 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -XXX,XX +XXX,XX @@ F: hw/arm/fsl-imx8mm.c
 F: hw/arm/imx8mm-evk.c
 F: include/hw/arm/fsl-imx8mm.h
 F: docs/system/arm/imx8m.rst
+F: tests/functional/aarch64/test_imx8mm_evk.py
 
 MCIMX8MP-EVK / i.MX8MP
 M: Bernhard Beschow <shentey@gmail.com>
diff --git a/tests/functional/aarch64/meson.build b/tests/functional/aarch64/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/tests/functional/aarch64/meson.build
+++ b/tests/functional/aarch64/meson.build
@@ -XXX,XX +XXX,XX @@ test_aarch64_timeouts = {
   'aspeed_ast2700a2' : 600,
   'aspeed_ast2700fc' : 600,
   'device_passthrough' : 720,
+  'imx8mm_evk' : 240,
   'imx8mp_evk' : 240,
   'raspi4' : 480,
   'reverse_debug' : 180,
@@ -XXX,XX +XXX,XX @@ tests_aarch64_system_thorough = [
   'aspeed_ast2700fc',
   'device_passthrough',
   'hotplug_pci',
+  'imx8mm_evk',
   'imx8mp_evk',
   'kvm',
   'multiprocess',
diff --git a/tests/functional/aarch64/test_imx8mm_evk.py b/tests/functional/aarch64/test_imx8mm_evk.py
new file mode 100755
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/tests/functional/aarch64/test_imx8mm_evk.py
@@ -XXX,XX +XXX,XX @@
+#!/usr/bin/env python3
+#
+# Functional test that boots a Linux kernel and checks the console
+#
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+from qemu_test import LinuxKernelTest, Asset
+
+
+class Imx8mmEvkMachine(LinuxKernelTest):
+
+    ASSET_IMAGE = Asset(
+        ('https://cloud.debian.org/images/cloud/bookworm/20231210-1590/'
+         'debian-12-generic-arm64-20231210-1590.tar.xz'),
+        '7ebf1577b32d5af6204df74b54ca2e4675de9b5a9fa14f3ff70b88eeb7b3b359')
+
+    KERNEL_OFFSET = 0x51000000
+    KERNEL_SIZE = 32622528
+    INITRD_OFFSET = 0x76000000
+    INITRD_SIZE = 30987766
+    DTB_OFFSET = 0x64DB5000
+    DTB_SIZE = 36812
+
+    def extract(self, in_path, out_path, offset, size):
+        try:
+            with open(in_path, "rb") as source:
+                source.seek(offset)
+                data = source.read(size)
+            with open(out_path, "wb") as target:
+                target.write(data)
+        except (IOError, ValueError) as e:
+            self.log.error(f"Failed to extract {out_path}: {e}")
+            raise
+
+    def setUp(self):
+        super().setUp()
+
+        self.image_path = self.scratch_file("disk.raw")
+        self.kernel_path = self.scratch_file("linux")
+        self.initrd_path = self.scratch_file("initrd.zstd")
+        self.dtb_path = self.scratch_file("imx8mm-evk.dtb")
+
+        self.archive_extract(self.ASSET_IMAGE)
+        self.extract(self.image_path, self.kernel_path,
+                     self.KERNEL_OFFSET, self.KERNEL_SIZE)
+        self.extract(self.image_path, self.initrd_path,
+                     self.INITRD_OFFSET, self.INITRD_SIZE)
+        self.extract(self.image_path, self.dtb_path,
+                     self.DTB_OFFSET, self.DTB_SIZE)
+
+    def test_aarch64_imx8mm_evk_usdhc(self):
+        self.require_accelerator("tcg")
+        self.set_machine('imx8mm-evk')
+        self.vm.set_console(console_index=1)
+        self.vm.add_args('-m', '2G',
+                         '-smp', '4',
+                         '-kernel', self.kernel_path,
+                         '-initrd', self.initrd_path,
+                         '-dtb', self.dtb_path,
+                         '-append', 'root=/dev/mmcblk2p1',
+                         '-drive', f'file={self.image_path},if=sd,bus=2,'
+                                    'format=raw,id=mmcblk2,snapshot=on')
+
+        self.vm.launch()
+        self.wait_for_console_pattern('Welcome to ')
+
+
+if __name__ == '__main__':
+    LinuxKernelTest.main()
-- 
2.43.0

From: Philippe Mathieu-Daudé <philmd@linaro.org>

As mentioned by Richard in [*]:

We don't actually need any specific endianness here, because
  every byte has the same value.  So we could simply drop MO_TE.
  That would produce a store in host-endianness, which will be
  fractionally more efficient on some hosts.

[*] https://lore.kernel.org/qemu-devel/d64d3576-9188-4e74-afdc-3492c9feb8e0@linaro.org/

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20260414005348.4767-2-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/helper-a64.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/target/arm/tcg/helper-a64.c b/target/arm/tcg/helper-a64.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/helper-a64.c
+++ b/target/arm/tcg/helper-a64.c
@@ -XXX,XX +XXX,XX @@ static uint64_t set_step_tags(CPUARMState *env, uint64_t toaddr,
          * the page dirty and will use the fast path.
          */
         uint64_t repldata = data * 0x0101010101010101ULL;
-        MemOpIdx oi16 = make_memop_idx(MO_TE | MO_128, memidx);
+        MemOpIdx oi16 = make_memop_idx(MO_128, memidx);
         cpu_st16_mmu(env, toaddr, int128_make128(repldata, repldata), oi16, ra);
         mte_mops_set_tags(env, toaddr, 16, *mtedesc);
         return 16;
-- 
2.43.0

From: Philippe Mathieu-Daudé <philmd@linaro.org>

Extract the implicit MO_TE definition in order to replace
it in the next commit.

Mechanical change using:

$ for n in UW UL UQ UO SW SL SQ; do \
      sed -i -e "s/MO_TE$n/MO_TE | MO_$n/" \
           $(git grep -l MO_TE$n target/arm); \
    done

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20260414005348.4767-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/m_helper.c   |  6 +--
 target/arm/tcg/mve_helper.c | 79 ++++++++++++++++++++-----------------
 2 files changed, 45 insertions(+), 40 deletions(-)

diff --git a/target/arm/tcg/m_helper.c b/target/arm/tcg/m_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/m_helper.c
+++ b/target/arm/tcg/m_helper.c
@@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest)
 
     /* Note that these stores can throw exceptions on MPU faults */
     ARMMMUIdx mmu_idx = arm_mmu_idx(env);
-    MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN,
+    MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN,
                                  arm_to_core_mmu_idx(mmu_idx));
     cpu_stl_mmu(env, sp, nextinst, oi, GETPC());
     cpu_stl_mmu(env, sp + 4, saved_psr, oi, GETPC());
@@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr)
     bool lspact = env->v7m.fpccr[s] & R_V7M_FPCCR_LSPACT_MASK;
     uintptr_t ra = GETPC();
     ARMMMUIdx mmu_idx = arm_mmu_idx(env);
-    MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN,
+    MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN,
                                  arm_to_core_mmu_idx(mmu_idx));
 
     assert(env->v7m.secure);
@@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlldm)(CPUARMState *env, uint32_t fptr)
     ARMCPU *cpu = env_archcpu(env);
     uintptr_t ra = GETPC();
     ARMMMUIdx mmu_idx = arm_mmu_idx(env);
-    MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN,
+    MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN,
                                  arm_to_core_mmu_idx(mmu_idx));
 
     /* fptr is the value of Rn, the frame pointer we load the FP regs from */
diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/mve_helper.c
+++ b/target/arm/tcg/mve_helper.c
@@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env)
     }
 
 DO_VLDR(vldrb, MO_UB, 1, uint8_t, ldb, 1, uint8_t)
-DO_VLDR(vldrh, MO_TEUW, 2, uint16_t, ldw, 2, uint16_t)
-DO_VLDR(vldrw, MO_TEUL, 4, uint32_t, ldl, 4, uint32_t)
+DO_VLDR(vldrh, MO_TE | MO_UW, 2, uint16_t, ldw, 2, uint16_t)
+DO_VLDR(vldrw, MO_TE | MO_UL, 4, uint32_t, ldl, 4, uint32_t)
 
 DO_VSTR(vstrb, MO_UB, 1, stb, 1, uint8_t)
-DO_VSTR(vstrh, MO_TEUW, 2, stw, 2, uint16_t)
-DO_VSTR(vstrw, MO_TEUL, 4, stl, 4, uint32_t)
+DO_VSTR(vstrh, MO_TE | MO_UW, 2, stw, 2, uint16_t)
+DO_VSTR(vstrw, MO_TE | MO_UL, 4, stl, 4, uint32_t)
 
 DO_VLDR(vldrb_sh, MO_SB, 1, int8_t, ldb, 2, int16_t)
 DO_VLDR(vldrb_sw, MO_SB, 1, int8_t, ldb, 4, int32_t)
 DO_VLDR(vldrb_uh, MO_UB, 1, uint8_t, ldb, 2, uint16_t)
 DO_VLDR(vldrb_uw, MO_UB, 1, uint8_t, ldb, 4, uint32_t)
-DO_VLDR(vldrh_sw, MO_TESW, 2, int16_t, ldw, 4, int32_t)
-DO_VLDR(vldrh_uw, MO_TEUW, 2, uint16_t, ldw, 4, uint32_t)
+DO_VLDR(vldrh_sw, MO_TE | MO_SW, 2, int16_t, ldw, 4, int32_t)
+DO_VLDR(vldrh_uw, MO_TE | MO_UW, 2, uint16_t, ldw, 4, uint32_t)
 
 DO_VSTR(vstrb_h, MO_UB, 1, stb, 2, int16_t)
 DO_VSTR(vstrb_w, MO_UB, 1, stb, 4, int32_t)
-DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t)
+DO_VSTR(vstrh_w, MO_TE | MO_UW, 2, stw, 4, int32_t)
 
 #undef DO_VLDR
 #undef DO_VSTR
@@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t)
         unsigned e;                                                     \
         uint32_t addr;                                                  \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (e = 0; e < 16 / 4; e++, mask >>= 4, eci_mask >>= 4) {      \
             if (!(eci_mask & 1)) {                                      \
                 continue;                                               \
@@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t)
         unsigned e;                                                     \
         uint32_t addr;                                                  \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (e = 0; e < 16 / 4; e++, mask >>= 4, eci_mask >>= 4) {      \
             if (!(eci_mask & 1)) {                                      \
                 continue;                                               \
@@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t)
 
 DO_VLDR_SG(vldrb_sg_sh, MO_SB, int8_t, ldb, 2, int16_t, uint16_t, ADDR_ADD, false)
 DO_VLDR_SG(vldrb_sg_sw, MO_SB, int8_t, ldb, 4, int32_t, uint32_t, ADDR_ADD, false)
-DO_VLDR_SG(vldrh_sg_sw, MO_TESW, int16_t, ldw, 4, int32_t, uint32_t, ADDR_ADD, false)
+DO_VLDR_SG(vldrh_sg_sw, MO_TE | MO_SW, int16_t, ldw, 4,
+           int32_t, uint32_t, ADDR_ADD, false)
 
 DO_VLDR_SG(vldrb_sg_ub, MO_UB, uint8_t, ldb, 1, uint8_t, uint8_t, ADDR_ADD, false)
 DO_VLDR_SG(vldrb_sg_uh, MO_UB, uint8_t, ldb, 2, uint16_t, uint16_t, ADDR_ADD, false)
 DO_VLDR_SG(vldrb_sg_uw, MO_UB, uint8_t, ldb, 4, uint32_t, uint32_t, ADDR_ADD, false)
-DO_VLDR_SG(vldrh_sg_uh, MO_TEUW, uint16_t, ldw, 2, uint16_t, uint16_t, ADDR_ADD, false)
-DO_VLDR_SG(vldrh_sg_uw, MO_TEUW, uint16_t, ldw, 4, uint32_t, uint32_t, ADDR_ADD, false)
-DO_VLDR_SG(vldrw_sg_uw, MO_TEUL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD, false)
+DO_VLDR_SG(vldrh_sg_uh, MO_TE | MO_UW, uint16_t, ldw, 2,
+           uint16_t, uint16_t, ADDR_ADD, false)
+DO_VLDR_SG(vldrh_sg_uw, MO_TE | MO_UW, uint16_t, ldw, 4,
+           uint32_t, uint32_t, ADDR_ADD, false)
+DO_VLDR_SG(vldrw_sg_uw, MO_TE | MO_UL, uint32_t, ldl, 4,
+           uint32_t, uint32_t, ADDR_ADD, false)
 DO_VLDR64_SG(vldrd_sg_ud, ADDR_ADD, false)
 
-DO_VLDR_SG(vldrh_sg_os_sw, MO_TESW, int16_t, ldw, 4,
+DO_VLDR_SG(vldrh_sg_os_sw, MO_TE | MO_SW, int16_t, ldw, 4,
            int32_t, uint32_t, ADDR_ADD_OSH, false)
-DO_VLDR_SG(vldrh_sg_os_uh, MO_TEUW, uint16_t, ldw, 2,
+DO_VLDR_SG(vldrh_sg_os_uh, MO_TE | MO_UW, uint16_t, ldw, 2,
            uint16_t, uint16_t, ADDR_ADD_OSH, false)
-DO_VLDR_SG(vldrh_sg_os_uw, MO_TEUW, uint16_t, ldw, 4,
+DO_VLDR_SG(vldrh_sg_os_uw, MO_TE | MO_UW, uint16_t, ldw, 4,
            uint32_t, uint32_t, ADDR_ADD_OSH, false)
-DO_VLDR_SG(vldrw_sg_os_uw, MO_TEUL, uint32_t, ldl, 4,
+DO_VLDR_SG(vldrw_sg_os_uw, MO_TE | MO_UL, uint32_t, ldl, 4,
            uint32_t, uint32_t, ADDR_ADD_OSW, false)
 DO_VLDR64_SG(vldrd_sg_os_ud, ADDR_ADD_OSD, false)
 
 DO_VSTR_SG(vstrb_sg_ub, MO_UB, stb, 1, uint8_t, ADDR_ADD, false)
 DO_VSTR_SG(vstrb_sg_uh, MO_UB, stb, 2, uint16_t, ADDR_ADD, false)
 DO_VSTR_SG(vstrb_sg_uw, MO_UB, stb, 4, uint32_t, ADDR_ADD, false)
-DO_VSTR_SG(vstrh_sg_uh, MO_TEUW, stw, 2, uint16_t, ADDR_ADD, false)
-DO_VSTR_SG(vstrh_sg_uw, MO_TEUW, stw, 4, uint32_t, ADDR_ADD, false)
-DO_VSTR_SG(vstrw_sg_uw, MO_TEUL, stl, 4, uint32_t, ADDR_ADD, false)
+DO_VSTR_SG(vstrh_sg_uh, MO_TE | MO_UW, stw, 2, uint16_t, ADDR_ADD, false)
+DO_VSTR_SG(vstrh_sg_uw, MO_TE | MO_UW, stw, 4, uint32_t, ADDR_ADD, false)
+DO_VSTR_SG(vstrw_sg_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD, false)
 DO_VSTR64_SG(vstrd_sg_ud, ADDR_ADD, false)
 
-DO_VSTR_SG(vstrh_sg_os_uh, MO_TEUW, stw, 2, uint16_t, ADDR_ADD_OSH, false)
-DO_VSTR_SG(vstrh_sg_os_uw, MO_TEUW, stw, 4, uint32_t, ADDR_ADD_OSH, false)
-DO_VSTR_SG(vstrw_sg_os_uw, MO_TEUL, stl, 4, uint32_t, ADDR_ADD_OSW, false)
+DO_VSTR_SG(vstrh_sg_os_uh, MO_TE | MO_UW, stw, 2, uint16_t, ADDR_ADD_OSH, false)
+DO_VSTR_SG(vstrh_sg_os_uw, MO_TE | MO_UW, stw, 4, uint32_t, ADDR_ADD_OSH, false)
+DO_VSTR_SG(vstrw_sg_os_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD_OSW, false)
 DO_VSTR64_SG(vstrd_sg_os_ud, ADDR_ADD_OSD, false)
 
-DO_VLDR_SG(vldrw_sg_wb_uw, MO_TEUL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD, true)
+DO_VLDR_SG(vldrw_sg_wb_uw, MO_TE | MO_UL, uint32_t, ldl, 4,
+           uint32_t, uint32_t, ADDR_ADD, true)
 DO_VLDR64_SG(vldrd_sg_wb_ud, ADDR_ADD, true)
-DO_VSTR_SG(vstrw_sg_wb_uw, MO_TEUL, stl, 4, uint32_t, ADDR_ADD, true)
+DO_VSTR_SG(vstrw_sg_wb_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD, true)
 DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true)
 
 /*
@@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true)
         static const uint8_t off[4] = { O1, O2, O3, O4 };               \
         uint32_t addr, data;                                            \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true)
         int y; /* y counts 0 2 0 2 */                                   \
         uint16_t *qd;                                                   \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (beat = 0, y = 0; beat < 4; beat++, mask >>= 4, y ^= 2) {   \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true)
         uint32_t *qd;                                                   \
         int y;                                                          \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9)
         uint32_t addr, data;                                            \
         uint8_t *qd;                                                    \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9)
         int e;                                                          \
         uint16_t *qd;                                                   \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9)
         uint32_t addr, data;                                            \
         uint32_t *qd;                                                   \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20)
         static const uint8_t off[4] = { O1, O2, O3, O4 };               \
         uint32_t addr, data;                                            \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20)
         int y; /* y counts 0 2 0 2 */                                   \
         uint16_t *qd;                                                   \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (beat = 0, y = 0; beat < 4; beat++, mask >>= 4, y ^= 2) {   \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20)
         uint32_t *qd;                                                   \
         int y;                                                          \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9)
         uint32_t addr, data;                                            \
         uint8_t *qd;                                                    \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9)
         int e;                                                          \
         uint16_t *qd;                                                   \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9)
         uint32_t addr, data;                                            \
         uint32_t *qd;                                                   \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
-- 
2.43.0

From: Philippe Mathieu-Daudé <philmd@linaro.org>

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20260414005348.4767-4-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/mve_helper.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

From: Philippe Mathieu-Daudé <philmd@linaro.org>

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20260414005348.4767-5-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/mve_helper.c | 43 +++++++++++++++++--------------------
 1 file changed, 20 insertions(+), 23 deletions(-)

diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/mve_helper.c
+++ b/target/arm/tcg/mve_helper.c
@@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t)
         unsigned e;                                                     \
         uint32_t addr;                                                  \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MFLAG | MO_ALIGN, mmu_idx);        \
+        MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN,          \
+                                     mmu_idx);                          \
         for (e = 0; e < 16 / ESIZE; e++, mask >>= ESIZE, eci_mask >>= ESIZE) { \
             if (!(eci_mask & 1)) {                                      \
                 continue;                                               \
@@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t)
         unsigned e;                                                     \
         uint32_t addr;                                                  \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MFLAG | MO_ALIGN, mmu_idx);        \
+        MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN,          \
+                                     mmu_idx);                          \
         for (e = 0; e < 16 / ESIZE; e++, mask >>= ESIZE, eci_mask >>= ESIZE) { \
             if (!(eci_mask & 1)) {                                      \
                 continue;                                               \
@@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t)
 
 DO_VLDR_SG(vldrb_sg_sh, MO_SB, int8_t, ldb, 2, int16_t, uint16_t, ADDR_ADD, false)
 DO_VLDR_SG(vldrb_sg_sw, MO_SB, int8_t, ldb, 4, int32_t, uint32_t, ADDR_ADD, false)
-DO_VLDR_SG(vldrh_sg_sw, MO_TE | MO_SW, int16_t, ldw, 4,
-           int32_t, uint32_t, ADDR_ADD, false)
+DO_VLDR_SG(vldrh_sg_sw, MO_SW, int16_t, ldw, 4, int32_t, uint32_t, ADDR_ADD, false)
 
 DO_VLDR_SG(vldrb_sg_ub, MO_UB, uint8_t, ldb, 1, uint8_t, uint8_t, ADDR_ADD, false)
 DO_VLDR_SG(vldrb_sg_uh, MO_UB, uint8_t, ldb, 2, uint16_t, uint16_t, ADDR_ADD, false)
 DO_VLDR_SG(vldrb_sg_uw, MO_UB, uint8_t, ldb, 4, uint32_t, uint32_t, ADDR_ADD, false)
-DO_VLDR_SG(vldrh_sg_uh, MO_TE | MO_UW, uint16_t, ldw, 2,
-           uint16_t, uint16_t, ADDR_ADD, false)
-DO_VLDR_SG(vldrh_sg_uw, MO_TE | MO_UW, uint16_t, ldw, 4,
-           uint32_t, uint32_t, ADDR_ADD, false)
-DO_VLDR_SG(vldrw_sg_uw, MO_TE | MO_UL, uint32_t, ldl, 4,
-           uint32_t, uint32_t, ADDR_ADD, false)
+DO_VLDR_SG(vldrh_sg_uh, MO_UW, uint16_t, ldw, 2, uint16_t, uint16_t, ADDR_ADD, false)
+DO_VLDR_SG(vldrh_sg_uw, MO_UW, uint16_t, ldw, 4, uint32_t, uint32_t, ADDR_ADD, false)
+DO_VLDR_SG(vldrw_sg_uw, MO_UL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD, false)
 DO_VLDR64_SG(vldrd_sg_ud, ADDR_ADD, false)
 
-DO_VLDR_SG(vldrh_sg_os_sw, MO_TE | MO_SW, int16_t, ldw, 4,
+DO_VLDR_SG(vldrh_sg_os_sw, MO_SW, int16_t, ldw, 4,
            int32_t, uint32_t, ADDR_ADD_OSH, false)
-DO_VLDR_SG(vldrh_sg_os_uh, MO_TE | MO_UW, uint16_t, ldw, 2,
+DO_VLDR_SG(vldrh_sg_os_uh, MO_UW, uint16_t, ldw, 2,
            uint16_t, uint16_t, ADDR_ADD_OSH, false)
-DO_VLDR_SG(vldrh_sg_os_uw, MO_TE | MO_UW, uint16_t, ldw, 4,
+DO_VLDR_SG(vldrh_sg_os_uw, MO_UW, uint16_t, ldw, 4,
            uint32_t, uint32_t, ADDR_ADD_OSH, false)
-DO_VLDR_SG(vldrw_sg_os_uw, MO_TE | MO_UL, uint32_t, ldl, 4,
+DO_VLDR_SG(vldrw_sg_os_uw, MO_UL, uint32_t, ldl, 4,
            uint32_t, uint32_t, ADDR_ADD_OSW, false)
 DO_VLDR64_SG(vldrd_sg_os_ud, ADDR_ADD_OSD, false)
 
 DO_VSTR_SG(vstrb_sg_ub, MO_UB, stb, 1, uint8_t, ADDR_ADD, false)
 DO_VSTR_SG(vstrb_sg_uh, MO_UB, stb, 2, uint16_t, ADDR_ADD, false)
 DO_VSTR_SG(vstrb_sg_uw, MO_UB, stb, 4, uint32_t, ADDR_ADD, false)
-DO_VSTR_SG(vstrh_sg_uh, MO_TE | MO_UW, stw, 2, uint16_t, ADDR_ADD, false)
-DO_VSTR_SG(vstrh_sg_uw, MO_TE | MO_UW, stw, 4, uint32_t, ADDR_ADD, false)
-DO_VSTR_SG(vstrw_sg_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD, false)
+DO_VSTR_SG(vstrh_sg_uh, MO_UW, stw, 2, uint16_t, ADDR_ADD, false)
+DO_VSTR_SG(vstrh_sg_uw, MO_UW, stw, 4, uint32_t, ADDR_ADD, false)
+DO_VSTR_SG(vstrw_sg_uw, MO_UL, stl, 4, uint32_t, ADDR_ADD, false)
 DO_VSTR64_SG(vstrd_sg_ud, ADDR_ADD, false)
 
-DO_VSTR_SG(vstrh_sg_os_uh, MO_TE | MO_UW, stw, 2, uint16_t, ADDR_ADD_OSH, false)
-DO_VSTR_SG(vstrh_sg_os_uw, MO_TE | MO_UW, stw, 4, uint32_t, ADDR_ADD_OSH, false)
-DO_VSTR_SG(vstrw_sg_os_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD_OSW, false)
+DO_VSTR_SG(vstrh_sg_os_uh, MO_UW, stw, 2, uint16_t, ADDR_ADD_OSH, false)
+DO_VSTR_SG(vstrh_sg_os_uw, MO_UW, stw, 4, uint32_t, ADDR_ADD_OSH, false)
+DO_VSTR_SG(vstrw_sg_os_uw, MO_UL, stl, 4, uint32_t, ADDR_ADD_OSW, false)
 DO_VSTR64_SG(vstrd_sg_os_ud, ADDR_ADD_OSD, false)
 
-DO_VLDR_SG(vldrw_sg_wb_uw, MO_TE | MO_UL, uint32_t, ldl, 4,
-           uint32_t, uint32_t, ADDR_ADD, true)
+DO_VLDR_SG(vldrw_sg_wb_uw, MO_UL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD, true)
 DO_VLDR64_SG(vldrd_sg_wb_ud, ADDR_ADD, true)
-DO_VSTR_SG(vstrw_sg_wb_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD, true)
+DO_VSTR_SG(vstrw_sg_wb_uw, MO_UL, stl, 4, uint32_t, ADDR_ADD, true)
 DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true)
 
 /*
-- 
2.43.0

From: Philippe Mathieu-Daudé <philmd@linaro.org>

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20260414005348.4767-6-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/internals.h      | 6 ++++++
 target/arm/tcg/mve_helper.c | 3 ++-
 2 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/target/arm/internals.h b/target/arm/internals.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/internals.h
+++ b/target/arm/internals.h
@@ -XXX,XX +XXX,XX @@
 #include "exec/hwaddr.h"
 #include "exec/vaddr.h"
 #include "exec/breakpoint.h"
+#include "exec/memop.h"
 #include "accel/tcg/tb-cpu-state.h"
 #include "hw/core/registerfields.h"
 #include "tcg/tcg-gvec-desc.h"
@@ -XXX,XX +XXX,XX @@
 #define BANK_HYP    6
 #define BANK_MON    7
 
+static inline MemOp mo_endian(CPUARMState *env)
+{
+    return EX_TBFLAG_ANY(env->hflags, BE_DATA) ? MO_BE : MO_LE;
+}
+
 static inline int arm_env_mmu_index(CPUARMState *env)
 {
     return EX_TBFLAG_ANY(env->hflags, MMUIDX);
diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/mve_helper.c
+++ b/target/arm/tcg/mve_helper.c
@@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t)
         unsigned e;                                                     \
         uint32_t addr;                                                  \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (e = 0; e < 16 / 4; e++, mask >>= 4, eci_mask >>= 4) {      \
             if (!(eci_mask & 1)) {                                      \
                 continue;                                               \
-- 
2.43.0

From: Philippe Mathieu-Daudé <philmd@linaro.org>

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20260414005348.4767-7-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/mve_helper.c | 47 +++++++++++++++++++++++--------------
 1 file changed, 30 insertions(+), 17 deletions(-)

diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/mve_helper.c
+++ b/target/arm/tcg/mve_helper.c
@@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env)
         uint16_t eci_mask = mve_eci_mask(env);                          \
         unsigned b, e;                                                  \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN,          \
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MFLAG | MO_ALIGN, \
                                      mmu_idx);                          \
         /*                                                              \
          * R_SXTM allows the dest reg to become UNKNOWN for abandoned   \
@@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env)
         uint16_t mask = mve_element_mask(env);                          \
         unsigned b, e;                                                  \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN,          \
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MFLAG | MO_ALIGN, \
                                      mmu_idx);                          \
         for (b = 0, e = 0; b < 16; b += ESIZE, e++) {                   \
             if (mask & (1 << b)) {                                      \
@@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t)
         unsigned e;                                                     \
         uint32_t addr;                                                  \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN,          \
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MFLAG | MO_ALIGN, \
                                      mmu_idx);                          \
         for (e = 0; e < 16 / ESIZE; e++, mask >>= ESIZE, eci_mask >>= ESIZE) { \
             if (!(eci_mask & 1)) {                                      \
@@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t)
         unsigned e;                                                     \
         uint32_t addr;                                                  \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN,          \
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MFLAG | MO_ALIGN, \
                                      mmu_idx);                          \
         for (e = 0; e < 16 / ESIZE; e++, mask >>= ESIZE, eci_mask >>= ESIZE) { \
             if (!(eci_mask & 1)) {                                      \
@@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t)
         unsigned e;                                                     \
         uint32_t addr;                                                  \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (e = 0; e < 16 / 4; e++, mask >>= 4, eci_mask >>= 4) {      \
             if (!(eci_mask & 1)) {                                      \
                 continue;                                               \
@@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true)
         static const uint8_t off[4] = { O1, O2, O3, O4 };               \
         uint32_t addr, data;                                            \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true)
         int y; /* y counts 0 2 0 2 */                                   \
         uint16_t *qd;                                                   \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (beat = 0, y = 0; beat < 4; beat++, mask >>= 4, y ^= 2) {   \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true)
         uint32_t *qd;                                                   \
         int y;                                                          \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9)
         uint32_t addr, data;                                            \
         uint8_t *qd;                                                    \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9)
         int e;                                                          \
         uint16_t *qd;                                                   \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9)
         uint32_t addr, data;                                            \
         uint32_t *qd;                                                   \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20)
         static const uint8_t off[4] = { O1, O2, O3, O4 };               \
         uint32_t addr, data;                                            \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20)
         int y; /* y counts 0 2 0 2 */                                   \
         uint16_t *qd;                                                   \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (beat = 0, y = 0; beat < 4; beat++, mask >>= 4, y ^= 2) {   \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20)
         uint32_t *qd;                                                   \
         int y;                                                          \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9)
         uint32_t addr, data;                                            \
         uint8_t *qd;                                                    \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9)
         int e;                                                          \
         uint16_t *qd;                                                   \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9)
         uint32_t addr, data;                                            \
         uint32_t *qd;                                                   \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
-- 
2.43.0

From: Philippe Mathieu-Daudé <philmd@linaro.org>

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20260414005348.4767-8-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/meson.build  | 3 ++-
 target/arm/tcg/mve_helper.c | 2 +-
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/target/arm/tcg/meson.build b/target/arm/tcg/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/meson.build
+++ b/target/arm/tcg/meson.build
@@ -XXX,XX +XXX,XX @@ arm_ss.add(when: 'TARGET_AARCH64', if_false: files('stubs32.c'))
 arm_ss.add(files(
   'cpu32.c',
   'm_helper.c',
-  'mve_helper.c',
 ))
 
 arm_ss.add(when: 'TARGET_AARCH64', if_true: files(
@@ -XXX,XX +XXX,XX @@ arm_common_system_ss.add(
   'debug.c',
   'hflags.c',
   'gengvec.c',
+  'mve_helper.c',
   'neon_helper.c',
   'op_helper.c',
   'psci.c',
@@ -XXX,XX +XXX,XX @@ arm_user_ss.add(
   'debug.c',
   'gengvec.c',
   'hflags.c',
+  'mve_helper.c',
   'neon_helper.c',
   'op_helper.c',
   'tlb_helper.c',
diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/mve_helper.c
+++ b/target/arm/tcg/mve_helper.c
@@ -XXX,XX +XXX,XX @@
 #include "helper-mve.h"
 #include "internals.h"
 #include "vec_internal.h"
-#include "accel/tcg/cpu-ldst.h"
+#include "accel/tcg/cpu-ldst-common.h"
 #include "tcg/tcg.h"
 #include "fpu/softfloat.h"
 #include "crypto/clmul.h"
-- 
2.43.0

From: Philippe Mathieu-Daudé <philmd@linaro.org>

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20260414005348.4767-9-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/m_helper.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

From: Philippe Mathieu-Daudé <philmd@linaro.org>

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20260414005348.4767-10-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/m_helper.c  | 2 +-
 target/arm/tcg/meson.build | 3 ++-
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/target/arm/tcg/m_helper.c b/target/arm/tcg/m_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/m_helper.c
+++ b/target/arm/tcg/m_helper.c
@@ -XXX,XX +XXX,XX @@
 #include "qemu/log.h"
 #include "exec/page-protection.h"
 #ifdef CONFIG_TCG
-#include "accel/tcg/cpu-ldst.h"
+#include "accel/tcg/cpu-ldst-common.h"
 #include "semihosting/common-semi.h"
 #endif
 #if !defined(CONFIG_USER_ONLY)
diff --git a/target/arm/tcg/meson.build b/target/arm/tcg/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/meson.build
+++ b/target/arm/tcg/meson.build
@@ -XXX,XX +XXX,XX @@ arm_ss.add(when: 'TARGET_AARCH64', if_false: files('stubs32.c'))
 
 arm_ss.add(files(
   'cpu32.c',
-  'm_helper.c',
 ))
 
 arm_ss.add(when: 'TARGET_AARCH64', if_true: files(
@@ -XXX,XX +XXX,XX @@ arm_common_system_ss.add(
   'debug.c',
   'hflags.c',
   'gengvec.c',
+  'm_helper.c',
   'mve_helper.c',
   'neon_helper.c',
   'op_helper.c',
@@ -XXX,XX +XXX,XX @@ arm_user_ss.add(
   'debug.c',
   'gengvec.c',
   'hflags.c',
+  'm_helper.c',
   'mve_helper.c',
   'neon_helper.c',
   'op_helper.c',
-- 
2.43.0

From: Thomas Huth <thuth@redhat.com>

When writing to this register, QEMU currently aborts:

$ echo "readl 0x10000018" | ./qemu-system-arm -audiodev none,id=snd0 \
    -M integratorcp,accel=qtest,audiodev=snd0 -display none -qtest stdio
 [I 0.000000] OPENED
 [R +0.001907] readl 0x10000018
 qemu: hardware error: integratorcm_read: CM_LMBUSCNT
 [...]
 Aborted                    (core dumped)

This is bad, a guest should ideally never be able to kill QEMU like this.

Now, according to the "Intergrator/CP User Guide" from:

https://developer.arm.com/documentation/dui0159/b/porting-integrator-ap-and-im-pd1/registers

"The Integrator/AP CM_LMBUSCNT has been removed."

That means this register does not seem to be implemented on real CP boards
at all, only for older AP boards. Thus it should be fine if we simply
ignore this register in QEMU and handle it like all other unimplemented
registers in the "default" handler of the case statement.

Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3407
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20260420064933.64765-1-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/integratorcp.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/hw/arm/integratorcp.c b/hw/arm/integratorcp.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/integratorcp.c
+++ b/hw/arm/integratorcp.c
@@ -XXX,XX +XXX,XX @@ static uint64_t integratorcm_read(void *opaque, hwaddr offset,
         } else {
             return s->cm_lock;
         }
-    case 6: /* CM_LMBUSCNT */
-        /* ??? High frequency timer.  */
-        hw_error("integratorcm_read: CM_LMBUSCNT");
     case 7: /* CM_AUXOSC */
         return s->cm_auxosc;
     case 8: /* CM_SDRAM */
-- 
2.43.0

include/hw/arm/primecell.h used to be more expansive, but now the
only thing it defines is the ARM_SYSCTL_GPIO_* constants for the GPIO
lines for the arm-sysctl system-control device used on the Realview,
Versatile and Versatile Express boards.

Replace it with a header file specific to that device.

virt.c and vmapple.c included primecell.h despite not using the
constants it defined; there we can simply drop the include entirely.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20260416172627.690396-1-peter.maydell@linaro.org
---
 MAINTAINERS                  |  2 +-
 hw/arm/realview.c            |  2 +-
 hw/arm/vexpress.c            |  2 +-
 hw/arm/virt.c                |  1 -
 hw/misc/arm_sysctl.c         |  2 +-
 hw/vmapple/vmapple.c         |  1 -
 include/hw/arm/primecell.h   | 12 ------------
 include/hw/misc/arm_sysctl.h | 16 ++++++++++++++++
 8 files changed, 20 insertions(+), 18 deletions(-)
 delete mode 100644 include/hw/arm/primecell.h
 create mode 100644 include/hw/misc/arm_sysctl.h

diff --git a/MAINTAINERS b/MAINTAINERS
index XXXXXXX..XXXXXXX 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -XXX,XX +XXX,XX @@ F: hw/ssi/pl022.c
 F: include/hw/ssi/pl022.h
 F: hw/rtc/pl031.c
 F: include/hw/rtc/pl031.h
-F: include/hw/arm/primecell.h
 F: hw/timer/cmsdk-apb-timer.c
 F: include/hw/timer/cmsdk-apb-timer.h
 F: tests/qtest/cmsdk-apb-timer-test.c
@@ -XXX,XX +XXX,XX @@ F: hw/*/versatile*
 F: hw/i2c/arm_sbcon_i2c.c
 F: include/hw/i2c/arm_sbcon_i2c.h
 F: hw/misc/arm_sysctl.c
+F: include/hw/misc/arm_sysctl.h
 F: docs/system/arm/versatile.rst
 
 Virt
diff --git a/hw/arm/realview.c b/hw/arm/realview.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/realview.c
+++ b/hw/arm/realview.c
@@ -XXX,XX +XXX,XX @@
 #include "target/arm/cpu.h"
 #include "hw/core/sysbus.h"
 #include "hw/arm/boot.h"
-#include "hw/arm/primecell.h"
 #include "hw/arm/machines-qom.h"
 #include "hw/core/split-irq.h"
+#include "hw/misc/arm_sysctl.h"
 #include "hw/net/lan9118.h"
 #include "hw/net/smc91c111.h"
 #include "hw/pci/pci.h"
diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/vexpress.c
+++ b/hw/arm/vexpress.c
@@ -XXX,XX +XXX,XX @@
 #include "qemu/datadir.h"
 #include "hw/core/sysbus.h"
 #include "hw/arm/boot.h"
-#include "hw/arm/primecell.h"
 #include "hw/arm/machines-qom.h"
+#include "hw/misc/arm_sysctl.h"
 #include "hw/net/lan9118.h"
 #include "hw/i2c/i2c.h"
 #include "net/net.h"
diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -XXX,XX +XXX,XX @@
 #include "monitor/qdev.h"
 #include "hw/core/sysbus.h"
 #include "hw/arm/boot.h"
-#include "hw/arm/primecell.h"
 #include "hw/arm/virt.h"
 #include "hw/arm/machines-qom.h"
 #include "hw/block/flash.h"
diff --git a/hw/misc/arm_sysctl.c b/hw/misc/arm_sysctl.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/misc/arm_sysctl.c
+++ b/hw/misc/arm_sysctl.c
@@ -XXX,XX +XXX,XX @@
 #include "system/runstate.h"
 #include "qemu/bitops.h"
 #include "hw/core/sysbus.h"
+#include "hw/misc/arm_sysctl.h"
 #include "migration/vmstate.h"
-#include "hw/arm/primecell.h"
 #include "qemu/log.h"
 #include "qemu/module.h"
 #include "qom/object.h"
diff --git a/hw/vmapple/vmapple.c b/hw/vmapple/vmapple.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/vmapple/vmapple.c
+++ b/hw/vmapple/vmapple.c
@@ -XXX,XX +XXX,XX @@
 #include "hw/core/sysbus.h"
 #include "hw/usb/usb.h"
 #include "hw/arm/boot.h"
-#include "hw/arm/primecell.h"
 #include "hw/char/pl011.h"
 #include "hw/intc/arm_gic.h"
 #include "hw/intc/arm_gicv3_common.h"
diff --git a/include/hw/arm/primecell.h b/include/hw/arm/primecell.h
deleted file mode 100644
index XXXXXXX..XXXXXXX
--- a/include/hw/arm/primecell.h
+++ /dev/null
@@ -XXX,XX +XXX,XX @@
-#ifndef PRIMECELL_H
-#define PRIMECELL_H
-
-/* Declarations for ARM PrimeCell based periperals.  */
-/* Also includes some devices that are currently only used by the
-   ARM boards.  */
-
-/* arm_sysctl GPIO lines */
-#define ARM_SYSCTL_GPIO_MMC_WPROT 0
-#define ARM_SYSCTL_GPIO_MMC_CARDIN 1
-
-#endif
diff --git a/include/hw/misc/arm_sysctl.h b/include/hw/misc/arm_sysctl.h
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/include/hw/misc/arm_sysctl.h
@@ -XXX,XX +XXX,XX @@
+/*
+ * Status and system control registers for ARM RealView/Versatile boards.
+ *
+ * Copyright (c) Linaro Ltd
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#ifndef HW_MISC_ARM_SYSCTL_H
+#define HW_MISC_ARM_SYSCTL_H
+
+/* arm_sysctl inbound GPIO lines */
+#define ARM_SYSCTL_GPIO_MMC_WPROT 0
+#define ARM_SYSCTL_GPIO_MMC_CARDIN 1
+
+#endif
-- 
2.43.0

If we create a normally-AArch64 CPU and configure it with
aarch64=off, this will by default leave all the AArch64 ID register
values in its ARMISARegisters struct untouched.  That in turn means
that tests of cpu_isar_feature(aa64_something, cpu) will return true.

Until now we have had a design policy that you shouldn't check an
aa64_ feature unless you know that the CPU has AArch64; but this is
quite fragile as it's easy to forget and only causes a problem in the
corner case where AArch64 was turned off.  In particular, when we
extend the ability to disable AArch64 from only KVM to also TCG there
are many more aa64 feature check points which we would otherwise have
to audit for whether they needed to be guarded with a check on
ARM_FEATURE_AARCH64.

Instead, make the CPU realize function zero out all the 64-bit ID
registers if a TCG CPU doesn't have AArch64; this will make aa64_
feature tests generally return false.

We only do this for TCG because only TCG really needs it, and for
KVM it might be confusing to have QEMU's idea of the ID registers
be different from KVM's.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20260416165353.589569-2-peter.maydell@linaro.org
---
 target/arm/cpu.c | 35 +++++++++++++++++++++++++++++++++++
 target/arm/cpu.h |  3 ++-
 2 files changed, 37 insertions(+), 1 deletion(-)

diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -XXX,XX +XXX,XX @@ void arm_cpu_finalize_features(ARMCPU *cpu, Error **errp)
     }
 }
 
+static void arm_clear_aarch64_idregs(ARMCPU *cpu)
+{
+    /* Zero out all the AArch64 ID registers in ARMISARegisters */
+    SET_IDREG(&cpu->isar, ID_AA64ISAR0, 0);
+    SET_IDREG(&cpu->isar, ID_AA64ISAR1, 0);
+    SET_IDREG(&cpu->isar, ID_AA64ISAR2, 0);
+    SET_IDREG(&cpu->isar, ID_AA64PFR0, 0);
+    SET_IDREG(&cpu->isar, ID_AA64PFR1, 0);
+    SET_IDREG(&cpu->isar, ID_AA64PFR2, 0);
+    SET_IDREG(&cpu->isar, ID_AA64MMFR0, 0);
+    SET_IDREG(&cpu->isar, ID_AA64MMFR1, 0);
+    SET_IDREG(&cpu->isar, ID_AA64MMFR2, 0);
+    SET_IDREG(&cpu->isar, ID_AA64MMFR3, 0);
+    SET_IDREG(&cpu->isar, ID_AA64DFR0, 0);
+    SET_IDREG(&cpu->isar, ID_AA64DFR1, 0);
+    SET_IDREG(&cpu->isar, ID_AA64AFR0, 0);
+    SET_IDREG(&cpu->isar, ID_AA64AFR1, 0);
+    SET_IDREG(&cpu->isar, ID_AA64ZFR0, 0);
+    SET_IDREG(&cpu->isar, ID_AA64SMFR0, 0);
+}
+
 static void arm_cpu_realizefn(DeviceState *dev, Error **errp)
 {
     CPUState *cs = CPU(dev);
@@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp)
     }
 #endif
 
+    /*
+     * A TCG aarch64=off CPU has no AArch64 at all, so we clear out the
+     * ID registers to avoid cpu_isar_feature(aa64_something, cpu) tests
+     * incorrectly returning true. We don't do this for other accelerators
+     * (which in practice means "for KVM", since no others have AArch32
+     * guest support) because from KVM's point of view the AArch64 ID
+     * registers still exist and must have their correct values. So we
+     * avoid clearing them out so that we don't have QEMU and KVM with
+     * different ideas of the ID registers.
+     */
+    if (tcg_enabled() && !arm_feature(env, ARM_FEATURE_AARCH64)) {
+        arm_clear_aarch64_idregs(cpu);
+    }
+
 #ifdef CONFIG_USER_ONLY
     /*
      * User mode relies on IC IVAU instructions to catch modification of
diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -XXX,XX +XXX,XX @@ struct ArchCPU {
      * Note that if you add an ID register to the ARMISARegisters struct
      * you need to also update the 32-bit and 64-bit versions of the
      * kvm_arm_get_host_cpu_features() function to correctly populate the
-     * field by reading the value from the KVM vCPU.
+     * field by reading the value from the KVM vCPU. If it is an AArch64
+     * ID register then you also must update arm_clear_aarch64_idregs().
      */
     struct ARMISARegisters {
         uint32_t mvfr0;
-- 
2.43.0

Allow the 'aarch64=off' property, which is currently KVM-only, to
be set for TCG CPUs also.

Note that we don't permit it on the qemu-aarch64 user-mode binary:
this makes no sense as that executable can only handle AArch64
syscalls (and it would also assert at startup since it doesn't
compile in the A32-specific GDB xml files like arm-neon.xml).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Clément Chigot <chigot@adacore.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20260416165353.589569-3-peter.maydell@linaro.org
---
 docs/system/arm/cpu-features.rst | 10 +++++----
 target/arm/cpu-features.h        |  5 +++++
 target/arm/cpu.c                 | 36 ++++++++++++++++++++++++++++----
 tests/qtest/arm-cpu-features.c   |  8 ++-----
 4 files changed, 45 insertions(+), 14 deletions(-)

diff --git a/docs/system/arm/cpu-features.rst b/docs/system/arm/cpu-features.rst
index XXXXXXX..XXXXXXX 100644
--- a/docs/system/arm/cpu-features.rst
+++ b/docs/system/arm/cpu-features.rst
@@ -XXX,XX +XXX,XX @@ not implement ARMv8-A, will not have the ``aarch64`` CPU property.
 QEMU's support may be limited for some CPU features, only partially
 supporting the feature or only supporting the feature under certain
 configurations.  For example, the ``aarch64`` CPU feature, which, when
-disabled, enables the optional AArch32 CPU feature, is only supported
-when using the KVM accelerator and when running on a host CPU type that
-supports the feature.  While ``aarch64`` currently only works with KVM,
-it could work with TCG.  CPU features that are specific to KVM are
+disabled, enables the optional AArch32 CPU feature, can only be set to
+``off`` on the TCG and KVM accelerators, and it cannot be set to
+``off`` under KVM unless running on a host CPU type that supports
+running guests in AArch32.
+
+CPU features that are inherently specific to KVM are
 prefixed with "kvm-" and are described in "KVM VCPU Features".
 
 CPU Feature Probing
diff --git a/target/arm/cpu-features.h b/target/arm/cpu-features.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu-features.h
+++ b/target/arm/cpu-features.h
@@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa64_aa32_el2(const ARMISARegisters *id)
     return FIELD_EX64_IDREG(id, ID_AA64PFR0, EL2) >= 2;
 }
 
+static inline bool isar_feature_aa64_aa32_el3(const ARMISARegisters *id)
+{
+    return FIELD_EX64_IDREG(id, ID_AA64PFR0, EL3) >= 2;
+}
+
 static inline bool isar_feature_aa64_ras(const ARMISARegisters *id)
 {
     return FIELD_EX64_IDREG(id, ID_AA64PFR0, RAS) != 0;
diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -XXX,XX +XXX,XX @@ static void aarch64_cpu_set_aarch64(Object *obj, bool value, Error **errp)
      * uniform execution state like do_interrupt.
      */
     if (value == false) {
-        if (!kvm_enabled() || !kvm_arm_aarch32_supported()) {
-            error_setg(errp, "'aarch64' feature cannot be disabled "
-                             "unless KVM is enabled and 32-bit EL1 "
-                             "is supported");
+        if (kvm_enabled()) {
+            if (!kvm_arm_aarch32_supported()) {
+                error_setg(errp, "'aarch64' feature cannot be disabled for KVM "
+                           "because this host does not support 32-bit EL1");
+                return;
+            }
+        } else if (tcg_enabled()) {
+#ifdef CONFIG_USER_ONLY
+            error_setg(errp, "'aarch64' feature cannot be disabled for "
+                       "usermode emulator qemu-aarch64; use qemu-arm instead");
+            return;
+#else
+            bool aa32_at_highest_el;
+            if (arm_feature(&cpu->env, ARM_FEATURE_EL3)) {
+                aa32_at_highest_el = cpu_isar_feature(aa64_aa32_el3, cpu);
+            } else if (arm_feature(&cpu->env, ARM_FEATURE_EL2)) {
+                aa32_at_highest_el = cpu_isar_feature(aa64_aa32_el2, cpu);
+            } else {
+                aa32_at_highest_el = cpu_isar_feature(aa64_aa32_el1, cpu);
+            }
+
+            if (!aa32_at_highest_el) {
+                error_setg(errp, "'aarch64' feature cannot be disabled for "
+                           "this TCG CPU because it does not support 32-bit "
+                           "execution at its highest implemented exception "
+                           "level");
+                return;
+            }
+#endif
+        } else {
+            error_setg(errp, "'aarch64' feature cannot be disabled for "
+                       "this accelerator");
             return;
         }
         unset_feature(&cpu->env, ARM_FEATURE_AARCH64);
diff --git a/tests/qtest/arm-cpu-features.c b/tests/qtest/arm-cpu-features.c
index XXXXXXX..XXXXXXX 100644
--- a/tests/qtest/arm-cpu-features.c
+++ b/tests/qtest/arm-cpu-features.c
@@ -XXX,XX +XXX,XX @@ static void test_query_cpu_model_expansion(const void *data)
         sve_tests_default(qts, "max");
         pauth_tests_default(qts, "max");
 
-        /* Test that features that depend on KVM generate errors without. */
-        assert_error(qts, "max",
-                     "'aarch64' feature cannot be disabled "
-                     "unless KVM is enabled and 32-bit EL1 "
-                     "is supported",
-                     "{ 'aarch64': false }");
+        /* TCG allows us to turn off AArch64 on the 'max' CPU type */
+        assert_set_feature(qts, "max", "aarch64", false);
     }
 
     qtest_quit(qts);
-- 
2.43.0

Add a basic test of the TCG 'aarch64=off' functionality; this is the
same as our existing arm/test_virt test, but it runs the AArch32
guest kernel on qemu-system-aarch64 with -cpu max,aarch64=off.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20260416165353.589569-4-peter.maydell@linaro.org
---
 tests/functional/aarch64/meson.build          |  1 +
 .../aarch64/test_virt_aarch64_off.py          | 37 +++++++++++++++++++
 2 files changed, 38 insertions(+)
 create mode 100755 tests/functional/aarch64/test_virt_aarch64_off.py

diff --git a/tests/functional/aarch64/meson.build b/tests/functional/aarch64/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/tests/functional/aarch64/meson.build
+++ b/tests/functional/aarch64/meson.build
@@ -XXX,XX +XXX,XX @@ tests_aarch64_system_thorough = [
   'tcg_plugins',
   'tuxrun',
   'virt',
+  'virt_aarch64_off',
   'virt_gpu',
   'virt_vbsa',
   'xen',
diff --git a/tests/functional/aarch64/test_virt_aarch64_off.py b/tests/functional/aarch64/test_virt_aarch64_off.py
new file mode 100755
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/tests/functional/aarch64/test_virt_aarch64_off.py
@@ -XXX,XX +XXX,XX @@
+#!/usr/bin/env python3
+#
+# Functional test that boots an AArch32 Linux kernel and checks the console
+# on a TCG aarch64 CPU with aarch64=off. This is the same image etc
+# as we use in tests/functional/arm/test_virt.py.
+#
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+from qemu_test import LinuxKernelTest, Asset
+
+class ArmVirtMachine(LinuxKernelTest):
+
+    ASSET_KERNEL = Asset(
+        ('https://archives.fedoraproject.org/pub/archive/fedora/linux/'
+         'releases/29/Everything/armhfp/os/images/pxeboot/vmlinuz'),
+        '18dd5f1a9a28bd539f9d047f7c0677211bae528e8712b40ca5a229a4ad8e2591')
+
+    def test_arm_virt(self):
+        self.set_machine('virt')
+        # KVM aarch64=off requires a host CPU that supports it, so
+        # restrict the test to TCG only
+        self.require_accelerator('tcg')
+        self.vm.add_args('-cpu', 'max,aarch64=off')
+
+        kernel_path = self.ASSET_KERNEL.fetch()
+
+        self.vm.set_console()
+        kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE +
+                               'console=ttyAMA0')
+        self.vm.add_args('-kernel', kernel_path,
+                         '-append', kernel_command_line)
+        self.vm.launch()
+        console_pattern = 'Kernel command line: %s' % kernel_command_line
+        self.wait_for_console_pattern(console_pattern)
+
+if __name__ == '__main__':
+    LinuxKernelTest.main()
-- 
2.43.0

From: Eric Auger <eric.auger@redhat.com>

We introduce a datatype for a tolerance with respect to a given
cpreg migration issue. The tolerance applies to a given cpreg kvm index,
and can be of different types:
a) mismatch in cpreg indexes
- ToleranceNotOnBothEnds (cpreg index is allowed to be only present
  on one end)
- ToleranceOnlySrcTestValue (cpreg index is allowed to be only
  present in source if its value @mask field matches @value)
b) mismatch in cpreg values
- ToleranceDiffInMask (value differences are allowed only within a mask)
- ToleranceFieldLT (incoming field value must be less than a given value)
- ToleranceFieldGT (incoming field value must be greater than a given value)

A QLIST of such tolerances can be populated using a new helper:
arm_register_cpreg_mig_tolerance() and arm_cpu_match_cpreg_mig_tolerance()
allows to check whether a tolerance exists for a given kvm index and its
criterion is matched.

callers for those helpers will be introduced in subsequent patches.

Only registration of migration tolerances related to cpreg index
mismatch is currently allowed.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20260420140552.104369-2-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu.c       | 82 ++++++++++++++++++++++++++++++++++++++++++
 target/arm/cpu.h       |  1 +
 target/arm/internals.h | 54 ++++++++++++++++++++++++++++
 3 files changed, 137 insertions(+)

diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -XXX,XX +XXX,XX @@ void arm_register_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook,
     QLIST_INSERT_HEAD(&cpu->el_change_hooks, entry, node);
 }
 
+static ARMCPRegMigTolerance *find_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx)
+{
+    ARMCPRegMigTolerance *t;
+    QLIST_FOREACH(t, &cpu->cpreg_mig_tolerances, node) {
+        if (t->kvmidx == kvmidx)  {
+            return t;
+        }
+    }
+    return NULL;
+}
+
+void arm_register_cpreg_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx,
+                                      uint64_t mask, uint64_t value,
+                                      ARMCPRegMigToleranceType type)
+{
+    ARMCPRegMigTolerance *entry;
+
+    /* make sure the kvmidx has not tolerance already registered */
+    assert(!find_mig_tolerance(cpu, kvmidx));
+
+    assert(type == ToleranceNotOnBothEnds ||
+           type == ToleranceOnlySrcTestValue);
+
+    entry = g_new0(ARMCPRegMigTolerance, 1);
+
+    entry->kvmidx = kvmidx;
+    entry->mask = mask;
+    entry->value = value;
+    entry->type = type;
+
+    QLIST_INSERT_HEAD(&cpu->cpreg_mig_tolerances, entry, node);
+}
+
+bool arm_cpu_match_cpreg_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx,
+                                       uint64_t vmstate_value, uint64_t local_value,
+                                       ARMCPRegMigToleranceType type)
+{
+    ARMCPRegMigTolerance *t = find_mig_tolerance(cpu, kvmidx);
+    uint64_t diff, diff_outside_mask, field;
+
+    if (!t || t->type != type) {
+        return false;
+    }
+
+    if (type == ToleranceNotOnBothEnds) {
+        return true;
+    }
+
+    if (type == ToleranceOnlySrcTestValue &&
+        ((vmstate_value & t->mask) == t->value)) {
+        return true;
+    }
+
+    /* Need to check the mask */
+    diff = vmstate_value ^ local_value;
+    diff_outside_mask = diff & ~t->mask;
+
+    if (diff_outside_mask) {
+        /* there are differences outside of the mask */
+        return false;
+    }
+    if (type == ToleranceDiffInMask) {
+        /* differences only in the field, tolerance matched */
+        return true;
+    }
+    /* need to compare field value against authorized ones */
+    field = vmstate_value & t->mask;
+    if (type == ToleranceFieldLT && (field < t->value)) {
+        return true;
+    }
+    if (type == ToleranceFieldGT && (field > t->value)) {
+        return true;
+    }
+    return false;
+}
+
 static void cp_reg_reset(gpointer key, gpointer value, gpointer opaque)
 {
     /* Reset a single ARMCPRegInfo register */
@@ -XXX,XX +XXX,XX @@ static void arm_cpu_initfn(Object *obj)
 
     QLIST_INIT(&cpu->pre_el_change_hooks);
     QLIST_INIT(&cpu->el_change_hooks);
+    QLIST_INIT(&cpu->cpreg_mig_tolerances);
 
 #ifdef CONFIG_USER_ONLY
 # ifdef TARGET_AARCH64
@@ -XXX,XX +XXX,XX @@ static void arm_cpu_finalizefn(Object *obj)
 {
     ARMCPU *cpu = ARM_CPU(obj);
     ARMELChangeHook *hook, *next;
+    ARMCPRegMigTolerance *t, *n;
 
     g_hash_table_destroy(cpu->cp_regs);
 
@@ -XXX,XX +XXX,XX @@ static void arm_cpu_finalizefn(Object *obj)
         QLIST_REMOVE(hook, node);
         g_free(hook);
     }
+    QLIST_FOREACH_SAFE(t, &cpu->cpreg_mig_tolerances, node, n) {
+        QLIST_REMOVE(t, node);
+        g_free(t);
+    }
 #ifndef CONFIG_USER_ONLY
     if (cpu->pmu_timer) {
         timer_free(cpu->pmu_timer);
diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -XXX,XX +XXX,XX @@ struct ArchCPU {
 
     QLIST_HEAD(, ARMELChangeHook) pre_el_change_hooks;
     QLIST_HEAD(, ARMELChangeHook) el_change_hooks;
+    QLIST_HEAD(, ARMCPRegMigTolerance) cpreg_mig_tolerances;
 
     int32_t node_id; /* NUMA node this CPU belongs to */
 
diff --git a/target/arm/internals.h b/target/arm/internals.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/internals.h
+++ b/target/arm/internals.h
@@ -XXX,XX +XXX,XX @@ int compare_u64(const void *a, const void *b);
 /* Used in FEAT_MEC to set the MECIDWidthm1 field in the MECIDR_EL2 register. */
 #define MECID_WIDTH 16
 
+typedef enum {
+    ToleranceNotOnBothEnds,
+    ToleranceOnlySrcTestValue,
+    ToleranceDiffInMask,
+    ToleranceFieldLT,
+    ToleranceFieldGT,
+} ARMCPRegMigToleranceType;
+
+typedef struct ARMCPRegMigTolerance {
+    uint64_t kvmidx;
+    uint64_t mask;
+    uint64_t value;
+    ARMCPRegMigToleranceType type;
+    QLIST_ENTRY(ARMCPRegMigTolerance) node;
+} ARMCPRegMigTolerance;
+
+/**
+ * arm_register_cpreg_mig_tolerance:
+ * Register a migration tolerance wrt one given cpreg identified by its
+ * @kvmidx. Calling this function twice for the same @kvmidx is a
+ * programming error and will cause an assertion failure.
+ *
+ * @cpu: vcpu to apply the migration tolerance on
+ * @kvmidx: kvm index of the cpreg the tolerance applies to
+ * @mask: bitmask where a difference is tolerated
+ *        (relevant with ToleranceDiffInMask)
+ * @value: value the bitmask field is compared with
+ *        (relevant with ToleranceFieldLT and ToleranceFieldGT)
+ * @type: type of the migration tolerance:
+ * - ToleranceNotOnBothEnds (cpreg index is allowed to be only present
+ *   on one end)
+ * - ToleranceOnlySrcTestValue (cpreg index is allowed to be only
+ *   present in source if its value @mask field matches @value)
+ * - ToleranceDiffInMask (mismatch in cpreg values are only tolerated
+ *   if differences are within @mask)
+ * - ToleranceFieldLT (mismatch in cpreg values are only tolerated
+ *   if incoming @bitmask field value is less than @value)
+ * - ToleranceFieldGT (mismatch in cpreg values are only tolerated
+ *   if incoming @bitmask field value is greater than @value)
+ */
+void arm_register_cpreg_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx,
+                                      uint64_t mask, uint64_t value,
+                                      ARMCPRegMigToleranceType type);
+
+/**
+ * arm_cpu_match_cpreg_mig_tolerance:
+ * Check whether a tolerance of type @type exists for a given @kvmidx
+ * and the tolerance criterion is satisfied
+ */
+bool arm_cpu_match_cpreg_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx,
+                                       uint64_t vmstate_value, uint64_t local_value,
+                                       ARMCPRegMigToleranceType type);
+
+
 #endif
-- 
2.43.0

From: Eric Auger <eric.auger@redhat.com>

If there is a mismatch between the cpreg indexes found on both ends,
check whether a tolerance was registered for the given kvmidx. If any,
silence warning/errors.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20260420140552.104369-3-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/machine.c    | 21 +++++++++++++++------
 target/arm/trace-events |  2 ++
 2 files changed, 17 insertions(+), 6 deletions(-)

diff --git a/target/arm/machine.c b/target/arm/machine.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/machine.c
+++ b/target/arm/machine.c
@@ -XXX,XX +XXX,XX @@ static void handle_cpreg_missing_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx
 {
     g_autofree gchar *name = print_register_name(kvmidx);
 
+    if (arm_cpu_match_cpreg_mig_tolerance(cpu, kvmidx,
+                                          0, 0, ToleranceNotOnBothEnds)) {
+        trace_tolerate_cpreg_missing_in_incoming_stream(name);
+        return;
+    }
     warn_report("%s: %s "
                 "expected by the destination but not in the incoming stream: "
                  "skip it", __func__, name);
 }
 
 /*
- * Handle the situation where @kvmidx is in the incoming stream
- * but not on destination. This currently fails the migration but
- * we plan to accomodate some exceptions, hence the boolean returned value.
+ * Handle the situation where @kvmidx is in the incoming
+ * stream but not on destination. This fails the migration if
+ * no cpreg mig tolerance is matched for this @kvmidx
+ * Return true if the migration should eventually fail
  */
 static bool handle_cpreg_only_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx)
 {
     g_autofree gchar *name = print_register_name(kvmidx);
-    bool fail = true;
 
+    if (arm_cpu_match_cpreg_mig_tolerance(cpu, kvmidx,
+                                          0, 0, ToleranceNotOnBothEnds)) {
+        trace_tolerate_cpreg_only_in_incoming_stream(name);
+        return false;
+    }
     error_report("%s: %s in the incoming stream but unknown on the "
                  "destination: fail migration", __func__, name);
-
-    return fail;
+    return true;
 }
 
 static int cpu_post_load(void *opaque, int version_id)
diff --git a/target/arm/trace-events b/target/arm/trace-events
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/trace-events
+++ b/target/arm/trace-events
@@ -XXX,XX +XXX,XX @@ arm_psci_call(uint64_t x0, uint64_t x1, uint64_t x2, uint64_t x3, uint32_t cpuid
 
 # machine.c
 cpu_post_load(uint32_t cpreg_vmstate_array_len, uint32_t cpreg_array_len) "cpreg_vmstate_array_len=%d cpreg_array_len=%d"
+tolerate_cpreg_missing_in_incoming_stream(char *name) "%s is missing in incoming stream but this is explicitly tolerated"
+tolerate_cpreg_only_in_incoming_stream(char *name) "%s is in incoming stream but not on destination but this is explicitly tolerated"
-- 
2.43.0

From: Eric Auger <eric.auger@redhat.com>

Pass the value of the incoming register to
handle_cpreg_only_in_incoming_stream and check whether there is
a matching ToleranceOnlySrcTestValue tolerance.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20260420140552.104369-4-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/machine.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/target/arm/machine.c b/target/arm/machine.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/machine.c
+++ b/target/arm/machine.c
@@ -XXX,XX +XXX,XX @@ static void handle_cpreg_missing_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx
  * no cpreg mig tolerance is matched for this @kvmidx
  * Return true if the migration should eventually fail
  */
-static bool handle_cpreg_only_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx)
+static bool
+handle_cpreg_only_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx, uint64_t value)
 {
     g_autofree gchar *name = print_register_name(kvmidx);
 
     if (arm_cpu_match_cpreg_mig_tolerance(cpu, kvmidx,
-                                          0, 0, ToleranceNotOnBothEnds)) {
+                                          0, 0, ToleranceNotOnBothEnds) ||
+        arm_cpu_match_cpreg_mig_tolerance(cpu, kvmidx,
+                                          value, 0, ToleranceOnlySrcTestValue)) {
         trace_tolerate_cpreg_only_in_incoming_stream(name);
         return false;
     }
@@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id)
         }
         if (cpu->cpreg_vmstate_indexes[v] < cpu->cpreg_indexes[i]) {
             fail = handle_cpreg_only_in_incoming_stream(cpu,
-                                                        cpu->cpreg_vmstate_indexes[v++]);
+                                                        cpu->cpreg_vmstate_indexes[v],
+                                                        cpu->cpreg_vmstate_values[v]);
+            v++;
             continue;
         }
         /* matching register, copy the value over */
@@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id)
      */
     for ( ; v < cpu->cpreg_vmstate_array_len; v++) {
         fail = handle_cpreg_only_in_incoming_stream(cpu,
-                                                    cpu->cpreg_vmstate_indexes[v]);
+                                                    cpu->cpreg_vmstate_indexes[v],
+                                                    cpu->cpreg_vmstate_values[v]);
     }
     if (fail) {
         return -1;
-- 
2.43.0

From: Eric Auger <eric.auger@redhat.com>

Before linux v6.13 those registers were erroneously unconditionally
exposed and this was fixed by commits:
- 0fcb4eea5345 ("KVM: arm64: Hide TCR2_EL1 from userspace when
                 disabled for guests")
- a68cddbe47ef ("KVM: arm64: Hide S1PIE registers from userspace
                 when disabled for guests")
in v6.13.

This means if we migrate from an old kernel host to a >= 6.13 kernel
host, migration currently fails.

Declare cpreg migration tolerance for those registers.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20260420140552.104369-5-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu64.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu64.c
+++ b/target/arm/cpu64.c
@@ -XXX,XX +XXX,XX @@ static void aarch64_a53_initfn(Object *obj)
     define_cortex_a72_a57_a53_cp_reginfo(cpu);
 }
 
+#if defined(CONFIG_KVM)
+static void kvm_arm_set_cpreg_mig_tolerances(ARMCPU *cpu)
+{
+    /*
+     * Registers that may be in the incoming stream and not exposed
+     * on the destination
+     */
+
+    /*
+     * TCR_EL1 was erroneously unconditionnally exposed before linux v6.13.
+     * See commit 0fcb4eea5345 ("KVM: arm64: Hide TCR2_EL1 from userspace
+     * when disabled for guests")
+     */
+    arm_register_cpreg_mig_tolerance(cpu, ARM64_SYS_REG(3, 0, 2, 0, 3),
+                                     0, 0, ToleranceNotOnBothEnds);
+    /*
+     * PIRE0_EL1 and PIR_EL1 were erroneously unconditionnally exposed
+     * before linux v6.13. See commit a68cddbe47ef ("KVM: arm64: Hide
+     * S1PIE registers from userspace when disabled for guests")
+     */
+    arm_register_cpreg_mig_tolerance(cpu, ARM64_SYS_REG(3, 0, 10, 2, 2),
+                                     0, 0, ToleranceNotOnBothEnds);
+    arm_register_cpreg_mig_tolerance(cpu, ARM64_SYS_REG(3, 0, 10, 2, 3),
+                                     0, 0, ToleranceNotOnBothEnds);
+}
+#endif
+
 static void aarch64_host_initfn(Object *obj)
 {
     ARMCPU *cpu = ARM_CPU(obj);
@@ -XXX,XX +XXX,XX @@ static void aarch64_host_initfn(Object *obj)
 #endif
 
 #if defined(CONFIG_KVM)
+    kvm_arm_set_cpreg_mig_tolerances(cpu);
     kvm_arm_set_cpu_features_from_host(cpu);
     aarch64_add_sve_properties(obj);
 #elif defined(CONFIG_HVF)
-- 
2.43.0

From: Eric Auger <eric.auger@redhat.com>

KVM_REG_ARM_VENDOR_HYP_BMAP_2 pseudo FW register is exposed
from v6.15 onwards. Backward migration from a >= v6.15 to an older
kernel would fail without cpreg migration tolerance definition
for this register. If the register is present on source but not
on destination, its value must be checked to make sure it matches
the reset value, ie. 0, meaning no service is exposed to the guest,
hence the choice of a ToleranceOnlySrcTestValue migration
tolerance.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20260420140552.104369-6-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu64.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu64.c
+++ b/target/arm/cpu64.c
@@ -XXX,XX +XXX,XX @@ static void kvm_arm_set_cpreg_mig_tolerances(ARMCPU *cpu)
                                      0, 0, ToleranceNotOnBothEnds);
     arm_register_cpreg_mig_tolerance(cpu, ARM64_SYS_REG(3, 0, 10, 2, 3),
                                      0, 0, ToleranceNotOnBothEnds);
+
+    /*
+     * KVM_REG_ARM_VENDOR_HYP_BMAP_2 pseudo FW register is exposed
+     * from v6.15 onwards. Backward migration from a >= v6.15 to an older
+     * kernel would fail without cpreg migration tolerance definition.
+     * If the register is present on source but not on destination, make
+     * sure it has its reset value, ie. 0, meaning no service is exposed
+     * to the guest.
+     */
+    arm_register_cpreg_mig_tolerance(cpu, KVM_REG_ARM_FW_FEAT_BMAP_REG(3),
+                                     UINT64_MAX, 0, ToleranceOnlySrcTestValue);
 }
 #endif
 
-- 
2.43.0

From: Eric Auger <eric.auger@redhat.com>

We want to remove AArch32 DBGDTRTX which was erroneously exposed.
This was attempted by 655659a74a36b ("target/arm: Correct encoding
of Debug Communications Channel registers") but it was discovered
that the removal of this debug register broke forward migration on
TCG. Now we have the cpreg migration tolerance infrastructure, we
can declare one for the DBGDTRTX. This allow to revert the reinstate
patch.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20260420140552.104369-7-eric.auger@redhat.com
[PMM: revised comment, included note about when we can drop
 the workaround]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/helper.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/target/arm/helper.c b/target/arm/helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu)
             .fgt = FGT_CLIDR_EL1,
             .resetvalue = GET_IDREG(isar, CLIDR)
         };
+        uint64_t dbgtr_el0_kvmidx =
+            cpreg_to_kvm_id(ENCODE_CP_REG(14, 0, 1, 0, 5, 3, 0));
+
         define_one_arm_cp_reg(cpu, &clidr);
         define_arm_cp_regs(cpu, v7_cp_reginfo);
         define_debug_regs(cpu);
+        /*
+         * We used to incorrectly expose a non-existent AArch32 "DBGDTRTX"
+         * register with this encoding. This has been fixed by commit
+         * 655659a74a36 ("target/arm: Correct encoding of Debug
+         * Communications Channel registers") by the introduction of correct
+         * separate cpreg definitions for AA64 and AA32 versions. However,
+         * the old cpreg definition couldn't be removed without breaking
+         * migration, so commit 4f2b82f604 reinstated the bogus encoding
+         * for migration data only.
+         *
+         * Now that we have migration tolerance infrastructure, we can use
+         * this to allow forward migration from the buggy QEMU versions,
+         * accepting and ignoring the bogus register if it is in the
+         * source data. QEMU 11.0 was the last version that sent the
+         * bogus encoding, so this workaround can be removed at the point
+         * where we no longer care about migration from that version
+         * (i.e. when we remove the "virt-11.0" machine type).
+         */
+        arm_register_cpreg_mig_tolerance(cpu, dbgtr_el0_kvmidx,
+                                         0, 0, ToleranceNotOnBothEnds);
     } else {
         define_arm_cp_regs(cpu, not_v7_cp_reginfo);
     }
-- 
2.43.0

From: Eric Auger <eric.auger@redhat.com>

This reverts commit 4f2b82f60431 ("target/arm: Reinstate bogus AArch32
DBGDTRTX register for migration compat). We don't need that commit
anymore as the AArch32 DBGDTRTX register is declared to
be safe to ignore in the incoming migration stream.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20260420140552.104369-8-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/debug_helper.c | 29 -----------------------------
 1 file changed, 29 deletions(-)

diff --git a/target/arm/debug_helper.c b/target/arm/debug_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/debug_helper.c
+++ b/target/arm/debug_helper.c
@@ -XXX,XX +XXX,XX @@ static void dbgclaimclr_write(CPUARMState *env, const ARMCPRegInfo *ri,
     env->cp15.dbgclaim &= ~(value & 0xFF);
 }
 
-static CPAccessResult access_bogus(CPUARMState *env, const ARMCPRegInfo *ri,
-                                   bool isread)
-{
-    /* Always UNDEF, as if this cpreg didn't exist */
-    return CP_ACCESS_UNDEFINED;
-}
-
 static const ARMCPRegInfo debug_cp_reginfo[] = {
     /*
      * DBGDRAR, DBGDSAR: always RAZ since we don't implement memory mapped
@@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo debug_cp_reginfo[] = {
       .opc0 = 2, .opc1 = 3, .crn = 0, .crm = 4, .opc2 = 0,
       .access = PL0_RW, .accessfn = access_tdcc,
       .type = ARM_CP_CONST, .resetvalue = 0 },
-    /*
-     * This is not a real AArch32 register. We used to incorrectly expose
-     * this due to a QEMU bug; to avoid breaking migration compatibility we
-     * need to continue to provide it so that we don't fail the inbound
-     * migration when it tells us about a sysreg that we don't have.
-     * We set an always-fails .accessfn, which means that the guest doesn't
-     * actually see this register (it will always UNDEF, identically to if
-     * there were no cpreg definition for it other than that we won't print
-     * a LOG_UNIMP message about it), and we set the ARM_CP_NO_GDB flag so the
-     * gdbstub won't see it either.
-     * (We can't just set .access = 0, because add_cpreg_to_hashtable()
-     * helpfully ignores cpregs which aren't accessible to the highest
-     * implemented EL.)
-     *
-     * TODO: implement a system for being able to describe "this register
-     * can be ignored if it appears in the inbound stream"; then we can
-     * remove this temporary hack.
-     */
-    { .name = "BOGUS_DBGDTR_EL0", .state = ARM_CP_STATE_AA32,
-      .cp = 14, .opc1 = 3, .crn = 0, .crm = 5, .opc2 = 0,
-      .access = PL0_RW, .accessfn = access_bogus,
-      .type = ARM_CP_CONST | ARM_CP_NO_GDB, .resetvalue = 0 },
     /*
      * OSECCR_EL1 provides a mechanism for an operating system
      * to access the contents of EDECCR. EDECCR is not implemented though,
-- 
2.43.0

From: Osama Abdelkader <osama.abdelkader@gmail.com>

fdt_node_offset_by_compatible(fdt, -1, compat) only finds the first match.
If the blob has more than one node with the same compatible string, extra
nodes will remain active. Remove all the matching nodes, using the same
loop as imx8mp-evk.c does for this purpose.

Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Message-id: 20260420162114.308519-1-osama.abdelkader@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/raspi4b.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/hw/arm/raspi4b.c b/hw/arm/raspi4b.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/raspi4b.c
+++ b/hw/arm/raspi4b.c
@@ -XXX,XX +XXX,XX @@ static void raspi4_modify_dtb(const struct arm_boot_info *info, void *fdt)
 
     for (int i = 0; i < ARRAY_SIZE(nodes_to_remove); i++) {
         const char *dev_str = nodes_to_remove[i];
+        int offset;
 
-        int offset = fdt_node_offset_by_compatible(fdt, -1, dev_str);
-        if (offset >= 0) {
-            if (!fdt_nop_node(fdt, offset)) {
-                warn_report("bcm2711 dtc: %s has been disabled!", dev_str);
+        offset = fdt_node_offset_by_compatible(fdt, -1, dev_str);
+        while (offset >= 0) {
+            if (fdt_nop_node(fdt, offset) == 0) {
+                warn_report("bcm2711 dtb: %s has been disabled!", dev_str);
             }
+            offset = fdt_node_offset_by_compatible(fdt, offset, dev_str);
         }
     }
 
-- 
2.43.0

From: Yucai Liu <1486344514@qq.com>

Implement a basic i.MX6UL LCDIF controller model with MMIO registers,
frame-done interrupt behavior, and framebuffer-backed display updates
for RGB565 and XRGB8888 input formats.

Place the LCDIF device under hw/display and build it via a dedicated
CONFIG_IMX6UL_LCDIF symbol. Model register fields with
registerfields.h helpers and provide migration support via vmstate.

Signed-off-by: Yucai Liu <1486344514@qq.com>
Message-id: 20260412110240.93116-2-yangyanglan718@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 MAINTAINERS                       |   2 +
 hw/display/Kconfig                |   4 +
 hw/display/imx6ul_lcdif.c         | 453 ++++++++++++++++++++++++++++++
 hw/display/meson.build            |   1 +
 include/hw/display/imx6ul_lcdif.h |  37 +++
 5 files changed, 497 insertions(+)
 create mode 100644 hw/display/imx6ul_lcdif.c
 create mode 100644 include/hw/display/imx6ul_lcdif.h

diff --git a/MAINTAINERS b/MAINTAINERS
index XXXXXXX..XXXXXXX 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -XXX,XX +XXX,XX @@ L: qemu-arm@nongnu.org
 S: Odd Fixes
 F: hw/arm/mcimx6ul-evk.c
 F: hw/arm/fsl-imx6ul.c
+F: hw/display/imx6ul_lcdif.c
 F: hw/misc/imx6ul_ccm.c
 F: include/hw/arm/fsl-imx6ul.h
+F: include/hw/display/imx6ul_lcdif.h
 F: include/hw/misc/imx6ul_ccm.h
 F: docs/system/arm/mcimx6ul-evk.rst
 
diff --git a/hw/display/Kconfig b/hw/display/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/display/Kconfig
+++ b/hw/display/Kconfig
@@ -XXX,XX +XXX,XX @@ config PL110
     bool
     select FRAMEBUFFER
 
+config IMX6UL_LCDIF
+    bool
+    select FRAMEBUFFER
+
 config SII9022
     bool
     depends on I2C
diff --git a/hw/display/imx6ul_lcdif.c b/hw/display/imx6ul_lcdif.c
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/hw/display/imx6ul_lcdif.c
@@ -XXX,XX +XXX,XX @@
+/*
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * i.MX6UL LCDIF controller
+ *
+ * Copyright (c) 2026 Yucai Liu <1486344514@qq.com>
+ */
+
+#include "qemu/osdep.h"
+#include "hw/display/imx6ul_lcdif.h"
+#include "hw/core/irq.h"
+#include "hw/core/registerfields.h"
+#include "hw/display/framebuffer.h"
+#include "migration/vmstate.h"
+#include "system/address-spaces.h"
+#include "qemu/module.h"
+#include "qemu/units.h"
+#include "ui/pixel_ops.h"
+
+#define LCDIF_MMIO_SIZE             (16 * KiB)
+#define LCDIF_RESET_CTRL1           0x000f0000
+
+REG32(CTRL, 0x00)
+    FIELD(CTRL, RUN, 0, 1)
+    FIELD(CTRL, WORD_LENGTH, 8, 2)
+REG32(CTRL1, 0x10)
+    FIELD(CTRL1, CUR_FRAME_DONE_IRQ, 9, 1)
+    FIELD(CTRL1, CUR_FRAME_DONE_IRQ_EN, 13, 1)
+    FIELD(CTRL1, BYTE_PACKING_FORMAT, 16, 4)
+REG32(V4_TRANSFER_COUNT, 0x30)
+    FIELD(V4_TRANSFER_COUNT, H_COUNT, 0, 16)
+    FIELD(V4_TRANSFER_COUNT, V_COUNT, 16, 16)
+REG32(V4_CUR_BUF, 0x40)
+REG32(V4_NEXT_BUF, 0x50)
+REG32(AS_NEXT_BUF, 0x230)
+
+#define REG_SET                     0x4
+#define REG_CLR                     0x8
+#define REG_TOG                     0xc
+
+#define CTRL_WORD_LENGTH_16         0
+#define CTRL_WORD_LENGTH_24         3
+
+#define FRAME_PERIOD_NS             (16 * 1000 * 1000ULL)
+
+enum IMX6ULLCDIFReg {
+    IMX6UL_LCDIF_REG_CTRL = A_CTRL >> 4,
+    IMX6UL_LCDIF_REG_CTRL1 = A_CTRL1 >> 4,
+    IMX6UL_LCDIF_REG_V4_TRANSFER_COUNT = A_V4_TRANSFER_COUNT >> 4,
+    IMX6UL_LCDIF_REG_V4_CUR_BUF = A_V4_CUR_BUF >> 4,
+    IMX6UL_LCDIF_REG_V4_NEXT_BUF = A_V4_NEXT_BUF >> 4,
+    IMX6UL_LCDIF_REG_AS_NEXT_BUF = A_AS_NEXT_BUF >> 4,
+};
+
+static inline bool imx6ul_lcdif_reg_exists(hwaddr reg)
+{
+    return (reg >> 4) < IMX6UL_LCDIF_REGS_NUM;
+}
+
+static inline bool imx6ul_lcdif_reg_has_setclr(hwaddr reg)
+{
+    switch (reg) {
+    case A_CTRL:
+    case A_CTRL1:
+        return true;
+    default:
+        return false;
+    }
+}
+
+static inline bool imx6ul_lcdif_is_running(IMX6ULLCDIFState *s)
+{
+    uint32_t ctrl = s->regs[IMX6UL_LCDIF_REG_CTRL];
+
+    return FIELD_EX32(ctrl, CTRL, RUN);
+}
+
+static inline bool imx6ul_lcdif_frame_done_pending(IMX6ULLCDIFState *s)
+{
+    uint32_t ctrl1 = s->regs[IMX6UL_LCDIF_REG_CTRL1];
+
+    return FIELD_EX32(ctrl1, CTRL1, CUR_FRAME_DONE_IRQ);
+}
+
+static void imx6ul_lcdif_schedule_frame(IMX6ULLCDIFState *s)
+{
+    int64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+
+    timer_mod(s->frame_timer, now + FRAME_PERIOD_NS);
+}
+
+static void imx6ul_lcdif_maybe_schedule_frame(IMX6ULLCDIFState *s)
+{
+    if (imx6ul_lcdif_is_running(s) && !imx6ul_lcdif_frame_done_pending(s)) {
+        imx6ul_lcdif_schedule_frame(s);
+    } else {
+        timer_del(s->frame_timer);
+    }
+}
+
+static void imx6ul_lcdif_update_irq(IMX6ULLCDIFState *s)
+{
+    uint32_t ctrl1 = s->regs[IMX6UL_LCDIF_REG_CTRL1];
+    bool level = FIELD_EX32(ctrl1, CTRL1, CUR_FRAME_DONE_IRQ_EN) &&
+                 FIELD_EX32(ctrl1, CTRL1, CUR_FRAME_DONE_IRQ);
+
+    qemu_set_irq(s->irq, level);
+}
+
+static void imx6ul_lcdif_frame_done(IMX6ULLCDIFState *s)
+{
+    uint32_t ctrl1 = s->regs[IMX6UL_LCDIF_REG_CTRL1];
+
+    ctrl1 = FIELD_DP32(ctrl1, CTRL1, CUR_FRAME_DONE_IRQ, 1);
+    s->regs[IMX6UL_LCDIF_REG_CTRL1] = ctrl1;
+    imx6ul_lcdif_update_irq(s);
+}
+
+static void imx6ul_lcdif_draw_line_rgb565(void *opaque, uint8_t *dst,
+                                          const uint8_t *src, int width,
+                                          int dststep)
+{
+    uint32_t *dst32 = (uint32_t *)dst;
+    int i;
+
+    for (i = 0; i < width; i++) {
+        uint16_t pixel = lduw_le_p(src);
+        uint8_t r = ((pixel >> 11) & 0x1f) << 3;
+        uint8_t g = ((pixel >> 5) & 0x3f) << 2;
+        uint8_t b = (pixel & 0x1f) << 3;
+
+        *dst32++ = rgb_to_pixel32(r, g, b);
+        src += 2;
+    }
+}
+
+static void imx6ul_lcdif_draw_line_xrgb8888(void *opaque, uint8_t *dst,
+                                            const uint8_t *src, int width,
+                                            int dststep)
+{
+    uint32_t *dst32 = (uint32_t *)dst;
+    int i;
+
+    for (i = 0; i < width; i++) {
+        uint32_t pixel = ldl_le_p(src);
+        uint8_t r = (pixel >> 16) & 0xff;
+        uint8_t g = (pixel >> 8) & 0xff;
+        uint8_t b = pixel & 0xff;
+
+        *dst32++ = rgb_to_pixel32(r, g, b);
+        src += 4;
+    }
+}
+
+static void imx6ul_lcdif_update_display(void *opaque)
+{
+    IMX6ULLCDIFState *s = opaque;
+    DisplaySurface *surface = qemu_console_surface(s->con);
+    uint32_t transfer_count = s->regs[IMX6UL_LCDIF_REG_V4_TRANSFER_COUNT];
+    uint32_t width = FIELD_EX32(transfer_count, V4_TRANSFER_COUNT, H_COUNT);
+    uint32_t height = FIELD_EX32(transfer_count, V4_TRANSFER_COUNT, V_COUNT);
+    uint32_t ctrl = s->regs[IMX6UL_LCDIF_REG_CTRL];
+    uint32_t frame_base = s->regs[IMX6UL_LCDIF_REG_V4_CUR_BUF];
+    drawfn fn;
+    int first = 0;
+    int last = 0;
+    int src_width;
+
+    if (!imx6ul_lcdif_is_running(s) || width == 0 || height == 0) {
+        return;
+    }
+
+    switch (FIELD_EX32(ctrl, CTRL, WORD_LENGTH)) {
+    case CTRL_WORD_LENGTH_16:
+        s->src_bpp = 2;
+        fn = imx6ul_lcdif_draw_line_rgb565;
+        break;
+    case CTRL_WORD_LENGTH_24:
+        s->src_bpp = 4;
+        fn = imx6ul_lcdif_draw_line_xrgb8888;
+        break;
+    default:
+        return;
+    }
+
+    if (surface_width(surface) != width || surface_height(surface) != height) {
+        qemu_console_resize(s->con, width, height);
+        surface = qemu_console_surface(s->con);
+        s->invalidate = true;
+    }
+
+    src_width = width * s->src_bpp;
+    if (s->invalidate || s->fb_base != frame_base ||
+        s->src_width != src_width || s->rows != height) {
+        framebuffer_update_memory_section(&s->fbsection, get_system_memory(),
+                                          frame_base, height, src_width);
+        s->fb_base = frame_base;
+        s->src_width = src_width;
+        s->rows = height;
+    }
+
+    framebuffer_update_display(surface, &s->fbsection, width, height,
+                               src_width, surface_stride(surface), 0,
+                               s->invalidate, fn, s, &first, &last);
+    if (first >= 0) {
+        dpy_gfx_update(s->con, 0, first, width, last - first + 1);
+    }
+
+    s->invalidate = false;
+}
+
+static void imx6ul_lcdif_invalidate_display(void *opaque)
+{
+    IMX6ULLCDIFState *s = opaque;
+
+    s->invalidate = true;
+}
+
+static const GraphicHwOps imx6ul_lcdif_graphic_ops = {
+    .invalidate = imx6ul_lcdif_invalidate_display,
+    .gfx_update = imx6ul_lcdif_update_display,
+};
+
+static void imx6ul_lcdif_frame_timer_cb(void *opaque)
+{
+    IMX6ULLCDIFState *s = opaque;
+
+    if (!imx6ul_lcdif_is_running(s) || imx6ul_lcdif_frame_done_pending(s)) {
+        return;
+    }
+
+    imx6ul_lcdif_frame_done(s);
+}
+
+static uint64_t imx6ul_lcdif_read(void *opaque, hwaddr offset, unsigned size)
+{
+    IMX6ULLCDIFState *s = opaque;
+    hwaddr reg = offset & ~0xf;
+    uint32_t idx;
+
+    assert(size == 4);
+    assert(!(offset & 0x3));
+    assert(offset < LCDIF_MMIO_SIZE);
+
+    idx = reg >> 4;
+    if (idx >= ARRAY_SIZE(s->regs)) {
+        return 0;
+    }
+
+    return s->regs[idx];
+}
+
+static void imx6ul_lcdif_write(void *opaque, hwaddr offset,
+                               uint64_t value, unsigned size)
+{
+    IMX6ULLCDIFState *s = opaque;
+    hwaddr reg = offset & ~0xf;
+    uint32_t idx;
+    uint32_t oldv;
+
+    assert(size == 4);
+    assert(!(offset & 0x3));
+    assert(offset < LCDIF_MMIO_SIZE);
+
+    if (!imx6ul_lcdif_reg_exists(reg)) {
+        return;
+    }
+
+    idx = reg >> 4;
+    oldv = s->regs[idx];
+
+    switch (offset & 0xf) {
+    case 0:
+        s->regs[idx] = (uint32_t)value;
+        break;
+    case REG_SET:
+        if (!imx6ul_lcdif_reg_has_setclr(reg)) {
+            return;
+        }
+        s->regs[idx] = oldv | (uint32_t)value;
+        break;
+    case REG_CLR:
+        if (!imx6ul_lcdif_reg_has_setclr(reg)) {
+            return;
+        }
+        s->regs[idx] = oldv & ~(uint32_t)value;
+        break;
+    case REG_TOG:
+        if (!imx6ul_lcdif_reg_has_setclr(reg)) {
+            return;
+        }
+        s->regs[idx] = oldv ^ (uint32_t)value;
+        break;
+    default:
+        g_assert_not_reached();
+    }
+
+    switch (reg) {
+    case A_CTRL:
+        if (!FIELD_EX32(oldv, CTRL, RUN) &&
+            FIELD_EX32(s->regs[idx], CTRL, RUN)) {
+            s->invalidate = true;
+            graphic_hw_invalidate(s->con);
+            imx6ul_lcdif_maybe_schedule_frame(s);
+            break;
+        }
+        if (FIELD_EX32(oldv, CTRL, RUN) &&
+            !FIELD_EX32(s->regs[idx], CTRL, RUN)) {
+            timer_del(s->frame_timer);
+        }
+        break;
+    case A_CTRL1:
+        if (FIELD_EX32(oldv, CTRL1, CUR_FRAME_DONE_IRQ) &&
+            !FIELD_EX32(s->regs[idx], CTRL1, CUR_FRAME_DONE_IRQ)) {
+            imx6ul_lcdif_maybe_schedule_frame(s);
+        }
+        break;
+    case A_V4_TRANSFER_COUNT:
+        s->invalidate = true;
+        graphic_hw_invalidate(s->con);
+        break;
+    case A_V4_CUR_BUF:
+        s->invalidate = true;
+        graphic_hw_invalidate(s->con);
+        break;
+    case A_V4_NEXT_BUF:
+        s->regs[IMX6UL_LCDIF_REG_V4_CUR_BUF] = s->regs[idx];
+        imx6ul_lcdif_frame_done(s);
+        s->invalidate = true;
+        graphic_hw_invalidate(s->con);
+        imx6ul_lcdif_maybe_schedule_frame(s);
+        return;
+    case A_AS_NEXT_BUF:
+        imx6ul_lcdif_frame_done(s);
+        imx6ul_lcdif_maybe_schedule_frame(s);
+        return;
+    default:
+        break;
+    }
+
+    imx6ul_lcdif_update_irq(s);
+}
+
+static const MemoryRegionOps imx6ul_lcdif_ops = {
+    .read = imx6ul_lcdif_read,
+    .write = imx6ul_lcdif_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .valid = {
+        .min_access_size = 4,
+        .max_access_size = 4,
+        .unaligned = false,
+    },
+};
+
+static void imx6ul_lcdif_reset(DeviceState *dev)
+{
+    IMX6ULLCDIFState *s = IMX6UL_LCDIF(dev);
+
+    memset(s->regs, 0, sizeof(s->regs));
+    s->regs[IMX6UL_LCDIF_REG_CTRL1] = LCDIF_RESET_CTRL1;
+    s->fb_base = 0;
+    s->src_width = 0;
+    s->rows = 0;
+    s->src_bpp = 0;
+    s->invalidate = true;
+    timer_del(s->frame_timer);
+    imx6ul_lcdif_update_irq(s);
+}
+
+static int imx6ul_lcdif_post_load(void *opaque, int version_id)
+{
+    IMX6ULLCDIFState *s = opaque;
+
+    s->fb_base = 0;
+    s->src_width = 0;
+    s->rows = 0;
+    s->src_bpp = 0;
+    s->invalidate = true;
+
+    imx6ul_lcdif_update_irq(s);
+    if (imx6ul_lcdif_is_running(s) &&
+        !imx6ul_lcdif_frame_done_pending(s) &&
+        !timer_pending(s->frame_timer)) {
+        imx6ul_lcdif_schedule_frame(s);
+    }
+
+    return 0;
+}
+
+static const VMStateDescription vmstate_imx6ul_lcdif = {
+    .name = TYPE_IMX6UL_LCDIF,
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .post_load = imx6ul_lcdif_post_load,
+    .fields = (const VMStateField[]) {
+        VMSTATE_UINT32_ARRAY(regs, IMX6ULLCDIFState, IMX6UL_LCDIF_REGS_NUM),
+        VMSTATE_TIMER_PTR(frame_timer, IMX6ULLCDIFState),
+        VMSTATE_END_OF_LIST()
+    },
+};
+
+static void imx6ul_lcdif_realize(DeviceState *dev, Error **errp)
+{
+    IMX6ULLCDIFState *s = IMX6UL_LCDIF(dev);
+
+    s->frame_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL,
+                                  imx6ul_lcdif_frame_timer_cb, s);
+    s->invalidate = true;
+    memory_region_init_io(&s->iomem, OBJECT(dev), &imx6ul_lcdif_ops, s,
+                          TYPE_IMX6UL_LCDIF, LCDIF_MMIO_SIZE);
+    sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->iomem);
+    sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq);
+    s->con = graphic_console_init(dev, 0, &imx6ul_lcdif_graphic_ops, s);
+}
+
+static void imx6ul_lcdif_unrealize(DeviceState *dev)
+{
+    IMX6ULLCDIFState *s = IMX6UL_LCDIF(dev);
+
+    timer_del(s->frame_timer);
+    timer_free(s->frame_timer);
+    s->frame_timer = NULL;
+
+    if (s->con) {
+        graphic_console_close(s->con);
+        s->con = NULL;
+    }
+}
+
+static void imx6ul_lcdif_class_init(ObjectClass *klass, const void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->realize = imx6ul_lcdif_realize;
+    dc->unrealize = imx6ul_lcdif_unrealize;
+    dc->vmsd = &vmstate_imx6ul_lcdif;
+    device_class_set_legacy_reset(dc, imx6ul_lcdif_reset);
+    dc->desc = "i.MX6UL LCDIF";
+}
+
+static const TypeInfo imx6ul_lcdif_info = {
+    .name = TYPE_IMX6UL_LCDIF,
+    .parent = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(IMX6ULLCDIFState),
+    .class_init = imx6ul_lcdif_class_init,
+};
+
+static void imx6ul_lcdif_register_types(void)
+{
+    type_register_static(&imx6ul_lcdif_info);
+}
+
+type_init(imx6ul_lcdif_register_types)
diff --git a/hw/display/meson.build b/hw/display/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/hw/display/meson.build
+++ b/hw/display/meson.build
@@ -XXX,XX +XXX,XX @@ system_ss.add(when: ['CONFIG_VGA_CIRRUS', 'CONFIG_VGA_ISA'], if_true: files('cir
 system_ss.add(when: 'CONFIG_G364FB', if_true: files('g364fb.c'))
 system_ss.add(when: 'CONFIG_JAZZ_LED', if_true: files('jazz_led.c'))
 system_ss.add(when: 'CONFIG_PL110', if_true: files('pl110.c'))
+system_ss.add(when: 'CONFIG_IMX6UL_LCDIF', if_true: files('imx6ul_lcdif.c'))
 system_ss.add(when: 'CONFIG_SII9022', if_true: files('sii9022.c'))
 system_ss.add(when: 'CONFIG_SSD0303', if_true: files('ssd0303.c'))
 system_ss.add(when: 'CONFIG_SSD0323', if_true: files('ssd0323.c'))
diff --git a/include/hw/display/imx6ul_lcdif.h b/include/hw/display/imx6ul_lcdif.h
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/include/hw/display/imx6ul_lcdif.h
@@ -XXX,XX +XXX,XX @@
+/*
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * i.MX6UL LCDIF controller
+ *
+ * Copyright (c) 2026 Yucai Liu <1486344514@qq.com>
+ */
+
+#ifndef IMX6UL_LCDIF_H
+#define IMX6UL_LCDIF_H
+
+#include "hw/core/sysbus.h"
+#include "qom/object.h"
+#include "qemu/timer.h"
+#include "ui/console.h"
+
+#define TYPE_IMX6UL_LCDIF "imx6ul-lcdif"
+#define IMX6UL_LCDIF_REGS_NUM ((0x230 >> 4) + 1)
+OBJECT_DECLARE_SIMPLE_TYPE(IMX6ULLCDIFState, IMX6UL_LCDIF)
+
+struct IMX6ULLCDIFState {
+    SysBusDevice parent_obj;
+
+    MemoryRegion iomem;
+    MemoryRegionSection fbsection;
+    qemu_irq irq;
+    QemuConsole *con;
+    QEMUTimer *frame_timer;
+    uint32_t fb_base;
+    uint32_t src_width;
+    uint32_t rows;
+    uint8_t src_bpp;
+    bool invalidate;
+    uint32_t regs[IMX6UL_LCDIF_REGS_NUM];
+};
+
+#endif /* IMX6UL_LCDIF_H */
-- 
2.43.0

From: Yucai Liu <1486344514@qq.com>

Instantiate LCDIF as a child object of the i.MX6UL SoC in init and
realize it in the SoC realize path before MMIO/IRQ hookup.

Also make FSL_IMX6UL select CONFIG_IMX6UL_LCDIF and map the LCDIF
region with a 16 KiB size to match the SoC memory map.

Signed-off-by: Yucai Liu <1486344514@qq.com>
Message-id: 20260412110240.93116-3-yangyanglan718@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/Kconfig              |  1 +
 hw/arm/fsl-imx6ul.c         | 12 ++++++++++--
 include/hw/arm/fsl-imx6ul.h |  4 +++-
 3 files changed, 14 insertions(+), 3 deletions(-)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -XXX,XX +XXX,XX @@ config FSL_IMX6UL
     imply I2C_DEVICES
     select A15MPCORE
     select IMX
+    select IMX6UL_LCDIF
     select IMX_FEC
     select IMX_I2C
     select IMX_USBPHY
diff --git a/hw/arm/fsl-imx6ul.c b/hw/arm/fsl-imx6ul.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx6ul.c
+++ b/hw/arm/fsl-imx6ul.c
@@ -XXX,XX +XXX,XX @@
 #include "qemu/osdep.h"
 #include "qapi/error.h"
 #include "hw/arm/fsl-imx6ul.h"
+#include "hw/display/imx6ul_lcdif.h"
 #include "hw/misc/unimp.h"
 #include "hw/usb/imx-usb-phy.h"
 #include "hw/core/boards.h"
@@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj)
         object_initialize_child(obj, name, &s->usb[i], TYPE_CHIPIDEA);
     }
 
+    /*
+     * LCDIF
+     */
+    object_initialize_child(obj, "lcdif", &s->lcdif, TYPE_IMX6UL_LCDIF);
+
     /*
      * SDHCIs
      */
@@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp)
     /*
      * LCD
      */
-    create_unimplemented_device("lcdif", FSL_IMX6UL_LCDIF_ADDR,
-                                FSL_IMX6UL_LCDIF_SIZE);
+    sysbus_realize(SYS_BUS_DEVICE(&s->lcdif), &error_abort);
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->lcdif), 0, FSL_IMX6UL_LCDIF_ADDR);
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->lcdif), 0,
+                       qdev_get_gpio_in(gic, FSL_IMX6UL_LCDIF_IRQ));
 
     /*
      * CSU
diff --git a/include/hw/arm/fsl-imx6ul.h b/include/hw/arm/fsl-imx6ul.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx6ul.h
+++ b/include/hw/arm/fsl-imx6ul.h
@@ -XXX,XX +XXX,XX @@
 #include "hw/net/imx_fec.h"
 #include "hw/usb/chipidea.h"
 #include "hw/usb/imx-usb-phy.h"
+#include "hw/display/imx6ul_lcdif.h"
 #include "system/memory.h"
 #include "target/arm/cpu.h"
 #include "qom/object.h"
@@ -XXX,XX +XXX,XX @@ struct FslIMX6ULState {
     IMX2WdtState       wdt[FSL_IMX6UL_NUM_WDTS];
     IMXUSBPHYState     usbphy[FSL_IMX6UL_NUM_USB_PHYS];
     ChipideaState      usb[FSL_IMX6UL_NUM_USBS];
+    IMX6ULLCDIFState   lcdif;
     MemoryRegion       rom;
     MemoryRegion       caam;
     MemoryRegion       ocram;
@@ -XXX,XX +XXX,XX @@ enum FslIMX6ULMemoryMap {
     FSL_IMX6UL_PXP_SIZE             = (16 * KiB),
 
     FSL_IMX6UL_LCDIF_ADDR           = 0x021C8000,
-    FSL_IMX6UL_LCDIF_SIZE           = 0x100,
+    FSL_IMX6UL_LCDIF_SIZE           = (16 * KiB),
 
     FSL_IMX6UL_CSI_ADDR             = 0x021C4000,
     FSL_IMX6UL_CSI_SIZE             = 0x100,
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

We have a registerfields interface which we can use for defining
fields alongside helpers to access them. Define the basic syndrome
layout and convert the helpers that take the imm16 data directly.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-2-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 75 ++++++++++++++++++++++++++++++++-----------
 1 file changed, 57 insertions(+), 18 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@
 #ifndef TARGET_ARM_SYNDROME_H
 #define TARGET_ARM_SYNDROME_H
 
-#include "qemu/bitops.h"
+#include "hw/core/registerfields.h"
 
 /* Valid Syndrome Register EC field values */
 enum arm_exception_class {
@@ -XXX,XX +XXX,XX @@ enum arm_exception_class {
     EC_AA64_BKPT              = 0x3c,
 };
 
+/* Generic syndrome encoding layout for HSR and lower 32 bits of ESR_EL2 */
+FIELD(SYNDROME, EC, 26, 6)
+FIELD(SYNDROME, IL, 25, 1)
+FIELD(SYNDROME, ISS, 0, 25)
+
 typedef enum {
     SME_ET_AccessTrap,
     SME_ET_Streaming,
@@ -XXX,XX +XXX,XX @@ typedef enum {
 
 static inline uint32_t syn_get_ec(uint32_t syn)
 {
-    return syn >> ARM_EL_EC_SHIFT;
+    return FIELD_EX32(syn, SYNDROME, EC);
 }
 
 static inline uint32_t syn_set_ec(uint32_t syn, uint32_t ec)
 {
-    return deposit32(syn, ARM_EL_EC_SHIFT, ARM_EL_EC_LENGTH, ec);
+    return FIELD_DP32(syn, SYNDROME, EC, ec);
 }
 
 /*
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_set_ec(uint32_t syn, uint32_t ec)
  */
 static inline uint32_t syn_uncategorized(void)
 {
-    return (EC_UNCATEGORIZED << ARM_EL_EC_SHIFT) | ARM_EL_IL;
+    uint32_t res = syn_set_ec(0, EC_UNCATEGORIZED);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    return res;
 }
 
+FIELD(ISS_IMM16, IMM16, 0, 16)
+
 static inline uint32_t syn_aa64_svc(uint32_t imm16)
 {
-    return (EC_AA64_SVC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff);
+    uint32_t res = syn_set_ec(0, EC_AA64_SVC);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16);
+    return res;
 }
 
 static inline uint32_t syn_aa64_hvc(uint32_t imm16)
 {
-    return (EC_AA64_HVC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff);
+    uint32_t res = syn_set_ec(0, EC_AA64_HVC);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16);
+    return res;
 }
 
 static inline uint32_t syn_aa64_smc(uint32_t imm16)
 {
-    return (EC_AA64_SMC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff);
+    uint32_t res = syn_set_ec(0, EC_AA64_SMC);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16);
+    return res;
 }
 
 static inline uint32_t syn_aa32_svc(uint32_t imm16, bool is_16bit)
 {
-    return (EC_AA32_SVC << ARM_EL_EC_SHIFT) | (imm16 & 0xffff)
-        | (is_16bit ? 0 : ARM_EL_IL);
+    uint32_t res = syn_set_ec(0, EC_AA32_SVC);
+    res = FIELD_DP32(res, SYNDROME, IL, is_16bit ? 0 : 1);
+    res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16);
+    return res;
 }
 
 static inline uint32_t syn_aa32_hvc(uint32_t imm16)
 {
-    return (EC_AA32_HVC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff);
+    uint32_t res = syn_set_ec(0, EC_AA32_HVC);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16);
+    return res;
 }
 
 static inline uint32_t syn_aa32_smc(void)
 {
-    return (EC_AA32_SMC << ARM_EL_EC_SHIFT) | ARM_EL_IL;
+    uint32_t res = syn_set_ec(0, EC_AA32_SMC);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    return res;
 }
 
 static inline uint32_t syn_aa64_bkpt(uint32_t imm16)
 {
-    return (EC_AA64_BKPT << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff);
+    uint32_t res = syn_set_ec(0, EC_AA64_BKPT);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16);
+    return res;
 }
 
 static inline uint32_t syn_aa32_bkpt(uint32_t imm16, bool is_16bit)
 {
-    return (EC_AA32_BKPT << ARM_EL_EC_SHIFT) | (imm16 & 0xffff)
-        | (is_16bit ? 0 : ARM_EL_IL);
+    uint32_t res = syn_set_ec(0, EC_AA32_BKPT);
+    res = FIELD_DP32(res, SYNDROME, IL, is_16bit ? 0 : 1);
+    res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16);
+    return res;
 }
 
 static inline uint32_t syn_aa64_sysregtrap(int op0, int op1, int op2,
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_simd_access_trap(int cv, int cond, bool is_16bit)
 
 static inline uint32_t syn_sve_access_trap(void)
 {
-    return (EC_SVEACCESSTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL;
+    uint32_t res = syn_set_ec(0, EC_SVEACCESSTRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    return res;
 }
 
 /*
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit)
 
 static inline uint32_t syn_illegalstate(void)
 {
-    return (EC_ILLEGALSTATE << ARM_EL_EC_SHIFT) | ARM_EL_IL;
+    uint32_t res = syn_set_ec(0, EC_ILLEGALSTATE);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    return res;
 }
 
 static inline uint32_t syn_pcalignment(void)
 {
-    return (EC_PCALIGNMENT << ARM_EL_EC_SHIFT) | ARM_EL_IL;
+    uint32_t res = syn_set_ec(0, EC_PCALIGNMENT);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    return res;
 }
 
 static inline uint32_t syn_gcs_data_check(GCSInstructionType it, int rn)
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_gcs_gcsstr(int ra, int rn)
 
 static inline uint32_t syn_serror(uint32_t extra)
 {
-    return (EC_SERROR << ARM_EL_EC_SHIFT) | ARM_EL_IL | extra;
+    uint32_t res = syn_set_ec(0, EC_SERROR);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    res = FIELD_DP32(res, SYNDROME, ISS, extra);
+    return res;
 }
 
 static inline uint32_t syn_mop(bool is_set, bool is_setg, int options,
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

Migrate syn_aa64_sysregtrap and co-processor register trap syndromes
to the registerfields API. The co-processor syndromes are split
between single and duel register moves.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-3-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 124 ++++++++++++++++++++++++++++++++++--------
 1 file changed, 102 insertions(+), 22 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ enum arm_exception_class {
 
 /* Generic syndrome encoding layout for HSR and lower 32 bits of ESR_EL2 */
 FIELD(SYNDROME, EC, 26, 6)
-FIELD(SYNDROME, IL, 25, 1)
+FIELD(SYNDROME, IL, 25, 1) /* IL=1 for 32 bit instructions */
 FIELD(SYNDROME, ISS, 0, 25)
 
 typedef enum {
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_aa64_smc(uint32_t imm16)
 static inline uint32_t syn_aa32_svc(uint32_t imm16, bool is_16bit)
 {
     uint32_t res = syn_set_ec(0, EC_AA32_SVC);
-    res = FIELD_DP32(res, SYNDROME, IL, is_16bit ? 0 : 1);
+    res = FIELD_DP32(res, SYNDROME, IL, !is_16bit);
     res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16);
     return res;
 }
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_aa64_bkpt(uint32_t imm16)
 static inline uint32_t syn_aa32_bkpt(uint32_t imm16, bool is_16bit)
 {
     uint32_t res = syn_set_ec(0, EC_AA32_BKPT);
-    res = FIELD_DP32(res, SYNDROME, IL, is_16bit ? 0 : 1);
+    res = FIELD_DP32(res, SYNDROME, IL, !is_16bit);
     res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16);
     return res;
 }
 
+/*
+ * ISS encoding for an exception from MSR, MRS, or System instruction
+ * in AArch64 state.
+ */
+FIELD(SYSREG_ISS, ISREAD, 0, 1) /* Direction, 1 is read */
+FIELD(SYSREG_ISS, CRM, 1, 4)
+FIELD(SYSREG_ISS, RT, 5, 5)
+FIELD(SYSREG_ISS, CRN, 10, 4)
+FIELD(SYSREG_ISS, OP1, 14, 3)
+FIELD(SYSREG_ISS, OP2, 17, 3)
+FIELD(SYSREG_ISS, OP0, 20, 2)
+
 static inline uint32_t syn_aa64_sysregtrap(int op0, int op1, int op2,
                                            int crn, int crm, int rt,
                                            int isread)
 {
-    return (EC_SYSTEMREGISTERTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL
-        | (op0 << 20) | (op2 << 17) | (op1 << 14) | (crn << 10) | (rt << 5)
-        | (crm << 1) | isread;
+    uint32_t res = syn_set_ec(0, EC_SYSTEMREGISTERTRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, SYSREG_ISS, OP0, op0);
+    res = FIELD_DP32(res, SYSREG_ISS, OP2, op2);
+    res = FIELD_DP32(res, SYSREG_ISS, OP1, op1);
+    res = FIELD_DP32(res, SYSREG_ISS, CRN, crn);
+    res = FIELD_DP32(res, SYSREG_ISS, RT, rt);
+    res = FIELD_DP32(res, SYSREG_ISS, CRM, crm);
+    res = FIELD_DP32(res, SYSREG_ISS, ISREAD, isread);
+
+    return res;
 }
 
+/*
+ * ISS encoding for an exception from an MCR or MRC access
+ * (move to/from co-processor)
+ */
+FIELD(COPROC_ISS, ISREAD, 0, 1)
+FIELD(COPROC_ISS, CRM, 1, 4)
+FIELD(COPROC_ISS, RT, 5, 5)
+FIELD(COPROC_ISS, CRN, 10, 4)
+FIELD(COPROC_ISS, OP1, 14, 3)
+FIELD(COPROC_ISS, OP2, 17, 3)
+FIELD(COPROC_ISS, COND, 20, 4)
+FIELD(COPROC_ISS, CV, 24, 1)
+
 static inline uint32_t syn_cp14_rt_trap(int cv, int cond, int opc1, int opc2,
                                         int crn, int crm, int rt, int isread,
                                         bool is_16bit)
 {
-    return (EC_CP14RTTRAP << ARM_EL_EC_SHIFT)
-        | (is_16bit ? 0 : ARM_EL_IL)
-        | (cv << 24) | (cond << 20) | (opc2 << 17) | (opc1 << 14)
-        | (crn << 10) | (rt << 5) | (crm << 1) | isread;
+    uint32_t res = syn_set_ec(0, EC_CP14RTTRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, !is_16bit);
+
+    res = FIELD_DP32(res, COPROC_ISS, CV, cv);
+    res = FIELD_DP32(res, COPROC_ISS, COND, cond);
+    res = FIELD_DP32(res, COPROC_ISS, OP2, opc2);
+    res = FIELD_DP32(res, COPROC_ISS, OP1, opc1);
+    res = FIELD_DP32(res, COPROC_ISS, CRN, crn);
+    res = FIELD_DP32(res, COPROC_ISS, RT, rt);
+    res = FIELD_DP32(res, COPROC_ISS, CRM, crm);
+    res = FIELD_DP32(res, COPROC_ISS, ISREAD, isread);
+
+    return res;
 }
 
 static inline uint32_t syn_cp15_rt_trap(int cv, int cond, int opc1, int opc2,
                                         int crn, int crm, int rt, int isread,
                                         bool is_16bit)
 {
-    return (EC_CP15RTTRAP << ARM_EL_EC_SHIFT)
-        | (is_16bit ? 0 : ARM_EL_IL)
-        | (cv << 24) | (cond << 20) | (opc2 << 17) | (opc1 << 14)
-        | (crn << 10) | (rt << 5) | (crm << 1) | isread;
+    uint32_t res = syn_set_ec(0, EC_CP15RTTRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, !is_16bit);
+
+    res = FIELD_DP32(res, COPROC_ISS, CV, cv);
+    res = FIELD_DP32(res, COPROC_ISS, COND, cond);
+    res = FIELD_DP32(res, COPROC_ISS, OP2, opc2);
+    res = FIELD_DP32(res, COPROC_ISS, OP1, opc1);
+    res = FIELD_DP32(res, COPROC_ISS, CRN, crn);
+    res = FIELD_DP32(res, COPROC_ISS, RT, rt);
+    res = FIELD_DP32(res, COPROC_ISS, CRM, crm);
+    res = FIELD_DP32(res, COPROC_ISS, ISREAD, isread);
+
+    return res;
 }
 
+/*
+ * ISS encoding for an exception from an MCRR or MRRC access
+ * (move to/from co-processor with 2 regs)
+ */
+FIELD(COPROC_R2_ISS, ISREAD, 0, 1)
+FIELD(COPROC_R2_ISS, CRM, 1, 4)
+FIELD(COPROC_R2_ISS, RT, 5, 5)
+FIELD(COPROC_R2_ISS, RT2, 10, 5)
+FIELD(COPROC_R2_ISS, OP1, 16, 4)
+FIELD(COPROC_R2_ISS, COND, 20, 4)
+FIELD(COPROC_R2_ISS, CV, 24, 1)
+
 static inline uint32_t syn_cp14_rrt_trap(int cv, int cond, int opc1, int crm,
                                          int rt, int rt2, int isread,
                                          bool is_16bit)
 {
-    return (EC_CP14RRTTRAP << ARM_EL_EC_SHIFT)
-        | (is_16bit ? 0 : ARM_EL_IL)
-        | (cv << 24) | (cond << 20) | (opc1 << 16)
-        | (rt2 << 10) | (rt << 5) | (crm << 1) | isread;
+    uint32_t res = syn_set_ec(0, EC_CP14RRTTRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, !is_16bit);
+
+    res = FIELD_DP32(res, COPROC_R2_ISS, CV, cv);
+    res = FIELD_DP32(res, COPROC_R2_ISS, COND, cond);
+    res = FIELD_DP32(res, COPROC_R2_ISS, OP1, opc1);
+    res = FIELD_DP32(res, COPROC_R2_ISS, RT2, rt2);
+    res = FIELD_DP32(res, COPROC_R2_ISS, RT, rt);
+    res = FIELD_DP32(res, COPROC_R2_ISS, CRM, crm);
+    res = FIELD_DP32(res, COPROC_R2_ISS, ISREAD, isread);
+
+    return res;
 }
 
 static inline uint32_t syn_cp15_rrt_trap(int cv, int cond, int opc1, int crm,
                                          int rt, int rt2, int isread,
                                          bool is_16bit)
 {
-    return (EC_CP15RRTTRAP << ARM_EL_EC_SHIFT)
-        | (is_16bit ? 0 : ARM_EL_IL)
-        | (cv << 24) | (cond << 20) | (opc1 << 16)
-        | (rt2 << 10) | (rt << 5) | (crm << 1) | isread;
+    uint32_t res = syn_set_ec(0, EC_CP15RRTTRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, !is_16bit);
+
+    res = FIELD_DP32(res, COPROC_R2_ISS, CV, cv);
+    res = FIELD_DP32(res, COPROC_R2_ISS, COND, cond);
+    res = FIELD_DP32(res, COPROC_R2_ISS, OP1, opc1);
+    res = FIELD_DP32(res, COPROC_R2_ISS, RT2, rt2);
+    res = FIELD_DP32(res, COPROC_R2_ISS, RT, rt);
+    res = FIELD_DP32(res, COPROC_R2_ISS, CRM, crm);
+    res = FIELD_DP32(res, COPROC_R2_ISS, ISREAD, isread);
+
+    return res;
 }
 
 static inline uint32_t syn_fp_access_trap(int cv, int cond, bool is_16bit,
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

The syn_simd_access trap was never used so remove it. We should only
see the COPROC encoding on v7 architectures.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-4-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 25 +++++++++++++++----------
 1 file changed, 15 insertions(+), 10 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_cp15_rrt_trap(int cv, int cond, int opc1, int crm,
     return res;
 }
 
+/*
+ * ISS encoding for an exception from an access to a register of
+ * instruction resulting from the FPEN or TFP traps.
+ */
+FIELD(FP_ISS, COPROC, 0, 4) /* ARMv7 only */
+FIELD(FP_ISS, COND, 20, 4)
+FIELD(FP_ISS, CV, 24, 1)
+
 static inline uint32_t syn_fp_access_trap(int cv, int cond, bool is_16bit,
                                           int coproc)
 {
     /* AArch32 FP trap or any AArch64 FP/SIMD trap: TA == 0 */
-    return (EC_ADVSIMDFPACCESSTRAP << ARM_EL_EC_SHIFT)
-        | (is_16bit ? 0 : ARM_EL_IL)
-        | (cv << 24) | (cond << 20) | coproc;
-}
+    uint32_t res = syn_set_ec(0, EC_ADVSIMDFPACCESSTRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, !is_16bit);
 
-static inline uint32_t syn_simd_access_trap(int cv, int cond, bool is_16bit)
-{
-    /* AArch32 SIMD trap: TA == 1 coproc == 0 */
-    return (EC_ADVSIMDFPACCESSTRAP << ARM_EL_EC_SHIFT)
-        | (is_16bit ? 0 : ARM_EL_IL)
-        | (cv << 24) | (cond << 20) | (1 << 5);
+    res = FIELD_DP32(res, FP_ISS, CV, cv);
+    res = FIELD_DP32(res, FP_ISS, COND, cond);
+    res = FIELD_DP32(res, FP_ISS, COPROC, coproc);
+
+    return res;
 }
 
 static inline uint32_t syn_sve_access_trap(void)
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

For simplicity keep the OP as a two bit field rather than the two
interlinked fields in the docs (ERET/ERETA).

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-5-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_sve_access_trap(void)
 }
 
 /*
+ * ISS encoding for an exception from an ERET, ERETAA or ERETAB
+ * instructions.
+ *
  * eret_op is bits [1:0] of the ERET instruction, so:
  * 0 for ERET, 2 for ERETAA, 3 for ERETAB.
  */
+FIELD(ERET_ISS, OP, 0, 2)
+
 static inline uint32_t syn_erettrap(int eret_op)
 {
-    return (EC_ERETTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL | eret_op;
+    uint32_t res = syn_set_ec(0, EC_ERETTRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    res = FIELD_DP32(res, ERET_ISS, OP, eret_op);
+
+    return res;
 }
 
 static inline uint32_t syn_smetrap(SMEExceptionType etype, bool is_16bit)
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-6-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_erettrap(int eret_op)
     return res;
 }
 
+/*
+ * ISS encoding for an exception due to SME functionality
+ */
+FIELD(SME_ISS, SMTC, 0, 2)
+
 static inline uint32_t syn_smetrap(SMEExceptionType etype, bool is_16bit)
 {
-    return (EC_SMETRAP << ARM_EL_EC_SHIFT)
-        | (is_16bit ? 0 : ARM_EL_IL) | etype;
+    uint32_t res = syn_set_ec(0, EC_SMETRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, !is_16bit);
+    res = FIELD_DP32(res, SME_ISS, SMTC, etype);
+
+    return res;
 }
 
 static inline uint32_t syn_pacfail(bool data, int keynumber)
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

syn_pactrap is fairly simple as the ISS is all RES0.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-7-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_smetrap(SMEExceptionType etype, bool is_16bit)
     return res;
 }
 
+/*
+ * ISS encoding for a PAC Fail exceptions
+ */
+FIELD(PACFAIL_ISS, BnA, 0, 1) /* B key or A key */
+FIELD(PACFAIL_ISS, DnI, 1, 1) /* Data or Instruction */
+
 static inline uint32_t syn_pacfail(bool data, int keynumber)
 {
-    int error_code = (data << 1) | keynumber;
-    return (EC_PACFAIL << ARM_EL_EC_SHIFT) | ARM_EL_IL | error_code;
+    uint32_t res = syn_set_ec(0, EC_PACFAIL);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, PACFAIL_ISS, DnI, data);
+    res = FIELD_DP32(res, PACFAIL_ISS, BnA, keynumber);
+
+    return res;
 }
 
+/*
+ * ISS encoding for an exception from a trapped Pointer
+ * Authentication instruction is RES0
+ */
 static inline uint32_t syn_pactrap(void)
 {
-    return (EC_PACTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL;
+    uint32_t res = syn_set_ec(0, EC_PACTRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    return res;
 }
 
 static inline uint32_t syn_btitrap(int btype)
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-8-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_pactrap(void)
     return res;
 }
 
+/*
+ * ISS encoding for an exception from a Branch Target Identification
+ * instruction.
+ */
+FIELD(BTI_ISS, BTYPE, 0, 2)
+
 static inline uint32_t syn_btitrap(int btype)
 {
-    return (EC_BTITRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL | btype;
+    uint32_t res = syn_set_ec(0, EC_BTITRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    res = FIELD_DP32(res, BTI_ISS, BTYPE, btype);
+    return res;
 }
 
 static inline uint32_t syn_bxjtrap(int cv, int cond, int rm)
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

This is an Armv7 specific syndrome for chips with Jazelle
functionality.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-9-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 20 ++++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_btitrap(int btype)
     return res;
 }
 
+/*
+ * ISS encoding for trapped BXJ execution
+ *
+ * This is an Armv7 encoding.
+ */
+FIELD(BXJ_ISS, RM, 0, 4)
+/* bits 4:19 are Reserved, UNK/SBZP */
+FIELD(BXJ_ISS, COND, 20, 4)
+FIELD(BXJ_ISS, CV, 24, 1)
+
 static inline uint32_t syn_bxjtrap(int cv, int cond, int rm)
 {
-    return (EC_BXJTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL |
-        (cv << 24) | (cond << 20) | rm;
+    uint32_t res = syn_set_ec(0, EC_BXJTRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, BXJ_ISS, CV, cv);
+    res = FIELD_DP32(res, BXJ_ISS, COND, cond);
+    res = FIELD_DP32(res, BXJ_ISS, RM, rm);
+
+    return res;
 }
 
 static inline uint32_t syn_gpc(int s2ptw, int ind, int gpcsc, int vncr,
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-10-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 30 +++++++++++++++++++++++++++---
 1 file changed, 27 insertions(+), 3 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_bxjtrap(int cv, int cond, int rm)
     return res;
 }
 
+/*
+ * ISS encoding for a Granule Protection Check exception
+ *
+ * These are only reported to EL3
+ */
+FIELD(GPC_ISS, xFSC, 0, 6)
+FIELD(GPC_ISS, WnR, 6, 1) /* Write not Read */
+FIELD(GPC_ISS, S1PTW, 7, 1)
+FIELD(GPC_ISS, CM, 8, 1)
+FIELD(GPC_ISS, VNCR, 13, 1)
+FIELD(GPC_ISS, GPCSC, 14, 6)
+FIELD(GPC_ISS, InD, 20, 1) /* Instruction not Data access */
+FIELD(GPC_ISS, S2PTW, 21, 1)
+
 static inline uint32_t syn_gpc(int s2ptw, int ind, int gpcsc, int vncr,
                                int cm, int s1ptw, int wnr, int fsc)
 {
-    return (EC_GPC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (s2ptw << 21)
-        | (ind << 20) | (gpcsc << 14) | (vncr << 13) | (cm << 8)
-        | (s1ptw << 7) | (wnr << 6) | fsc;
+    uint32_t res = syn_set_ec(0, EC_GPC);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, GPC_ISS, S2PTW, s2ptw);
+    res = FIELD_DP32(res, GPC_ISS, InD, ind);
+    res = FIELD_DP32(res, GPC_ISS, GPCSC, gpcsc);
+    res = FIELD_DP32(res, GPC_ISS, VNCR, vncr);
+    res = FIELD_DP32(res, GPC_ISS, CM, cm);
+    res = FIELD_DP32(res, GPC_ISS, S1PTW, s1ptw);
+    res = FIELD_DP32(res, GPC_ISS, WnR, wnr);
+    res = FIELD_DP32(res, GPC_ISS, xFSC, fsc);
+
+    return res;
 }
 
 static inline uint32_t syn_insn_abort(int same_el, int ea, int s1ptw, int fsc)
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

Migrate syn_insn_abort and syn_data_abort_* to the registerfields API.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20260422125250.1303100-11-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 87 ++++++++++++++++++++++++++++++++++++-------
 1 file changed, 74 insertions(+), 13 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_gpc(int s2ptw, int ind, int gpcsc, int vncr,
     return res;
 }
 
+/*
+ * ISS encoding for an exception from an Instruction Abort
+ *
+ * (aka instruction abort)
+ */
+FIELD(IABORT_ISS, IFSC, 0, 6)
+FIELD(IABORT_ISS, S1PTW, 7, 1)
+FIELD(IABORT_ISS, EA, 9, 1)
+FIELD(IABORT_ISS, FnV, 10, 1) /* FAR not Valid */
+FIELD(IABORT_ISS, SET, 11, 2)
+FIELD(IABORT_ISS, PFV, 14, 1)
+FIELD(IABORT_ISS, TopLevel, 21, 1) /* FEAT_THE */
+
 static inline uint32_t syn_insn_abort(int same_el, int ea, int s1ptw, int fsc)
 {
-    return (EC_INSNABORT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT)
-        | ARM_EL_IL | (ea << 9) | (s1ptw << 7) | fsc;
+    uint32_t res = syn_set_ec(0, EC_INSNABORT + same_el);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, IABORT_ISS, EA, ea);
+    res = FIELD_DP32(res, IABORT_ISS, S1PTW, s1ptw);
+    res = FIELD_DP32(res, IABORT_ISS, IFSC, fsc);
+
+    return res;
 }
 
+/*
+ * ISS encoding for an exception from a Data Abort
+ */
+FIELD(DABORT_ISS, DFSC, 0, 6)
+FIELD(DABORT_ISS, WNR, 6, 1)
+FIELD(DABORT_ISS, S1PTW, 7, 1)
+FIELD(DABORT_ISS, CM, 8, 1)
+FIELD(DABORT_ISS, EA, 9, 1)
+FIELD(DABORT_ISS, FnV, 10, 1)
+FIELD(DABORT_ISS, LST, 11, 2)
+FIELD(DABORT_ISS, VNCR, 13, 1)
+FIELD(DABORT_ISS, AR, 14, 1)
+FIELD(DABORT_ISS, SF, 15, 1)
+FIELD(DABORT_ISS, SRT, 16, 5)
+FIELD(DABORT_ISS, SSE, 21, 1)
+FIELD(DABORT_ISS, SAS, 22, 2)
+FIELD(DABORT_ISS, ISV, 24, 1)
+
 static inline uint32_t syn_data_abort_no_iss(int same_el, int fnv,
                                              int ea, int cm, int s1ptw,
                                              int wnr, int fsc)
 {
-    return (EC_DATAABORT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT)
-           | ARM_EL_IL
-           | (fnv << 10) | (ea << 9) | (cm << 8) | (s1ptw << 7)
-           | (wnr << 6) | fsc;
+    uint32_t res = syn_set_ec(0, EC_DATAABORT + same_el);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, DABORT_ISS, FnV, fnv);
+    res = FIELD_DP32(res, DABORT_ISS, EA, ea);
+    res = FIELD_DP32(res, DABORT_ISS, CM, cm);
+    res = FIELD_DP32(res, DABORT_ISS, S1PTW, s1ptw);
+    res = FIELD_DP32(res, DABORT_ISS, WNR, wnr);
+    res = FIELD_DP32(res, DABORT_ISS, DFSC, fsc);
+
+    return res;
 }
 
 static inline uint32_t syn_data_abort_with_iss(int same_el,
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_data_abort_with_iss(int same_el,
                                                int wnr, int fsc,
                                                bool is_16bit)
 {
-    return (EC_DATAABORT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT)
-           | (is_16bit ? 0 : ARM_EL_IL)
-           | ARM_EL_ISV | (sas << 22) | (sse << 21) | (srt << 16)
-           | (sf << 15) | (ar << 14)
-           | (ea << 9) | (cm << 8) | (s1ptw << 7) | (wnr << 6) | fsc;
+    uint32_t res = syn_set_ec(0, EC_DATAABORT + same_el);
+    res = FIELD_DP32(res, SYNDROME, IL, !is_16bit);
+
+    res = FIELD_DP32(res, DABORT_ISS, ISV, 1);
+    res = FIELD_DP32(res, DABORT_ISS, SAS, sas);
+    res = FIELD_DP32(res, DABORT_ISS, SSE, sse);
+    res = FIELD_DP32(res, DABORT_ISS, SRT, srt);
+    res = FIELD_DP32(res, DABORT_ISS, SF, sf);
+    res = FIELD_DP32(res, DABORT_ISS, AR, ar);
+    res = FIELD_DP32(res, DABORT_ISS, EA, ea);
+    res = FIELD_DP32(res, DABORT_ISS, CM, cm);
+    res = FIELD_DP32(res, DABORT_ISS, S1PTW, s1ptw);
+    res = FIELD_DP32(res, DABORT_ISS, WNR, wnr);
+    res = FIELD_DP32(res, DABORT_ISS, DFSC, fsc);
+
+    return res;
 }
 
 /*
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_data_abort_with_iss(int same_el,
  */
 static inline uint32_t syn_data_abort_vncr(int ea, int wnr, int fsc)
 {
-    return (EC_DATAABORT << ARM_EL_EC_SHIFT) | (1 << ARM_EL_EC_SHIFT)
-        | ARM_EL_IL | ARM_EL_VNCR | (wnr << 6) | fsc;
+    uint32_t res = syn_set_ec(0, EC_DATAABORT_SAME_EL);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, DABORT_ISS, VNCR, 1);
+    res = FIELD_DP32(res, DABORT_ISS, WNR, wnr);
+    res = FIELD_DP32(res, DABORT_ISS, DFSC, fsc);
+
+    return res;
 }
 
 static inline uint32_t syn_swstep(int same_el, int isv, int ex)
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

Migrate syn_swstep, syn_watchpoint and syn_breakpoint to the
registerfields API.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-12-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 54 ++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 48 insertions(+), 6 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_data_abort_vncr(int ea, int wnr, int fsc)
     return res;
 }
 
+/*
+ * ISS encoding for an exception from a Software Step exception.
+ */
+FIELD(SOFTSTEP_ISS, IFSC, 0, 6)
+FIELD(SOFTSTEP_ISS, EX, 6, 1)
+FIELD(SOFTSTEP_ISS, ISV, 24, 1)
+
 static inline uint32_t syn_swstep(int same_el, int isv, int ex)
 {
-    return (EC_SOFTWARESTEP << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT)
-        | ARM_EL_IL | (isv << 24) | (ex << 6) | 0x22;
+    uint32_t res = syn_set_ec(0, EC_SOFTWARESTEP + same_el);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, SOFTSTEP_ISS, ISV, isv);
+    res = FIELD_DP32(res, SOFTSTEP_ISS, EX, ex);
+    res = FIELD_DP32(res, SOFTSTEP_ISS, IFSC, 0x22);
+
+    return res;
 }
 
+/*
+ * ISS encoding for an exception from a Watchpoint exception
+ */
+FIELD(WATCHPOINT_ISS, DFSC, 0, 6)
+FIELD(WATCHPOINT_ISS, WNR, 6, 1)
+FIELD(WATCHPOINT_ISS, CM, 8, 1)
+FIELD(WATCHPOINT_ISS, FnV, 10, 1)
+FIELD(WATCHPOINT_ISS, VNCR, 13, 1) /* FEAT_NV2 */
+FIELD(WATCHPOINT_ISS, FnP, 15, 1)
+FIELD(WATCHPOINT_ISS, WPF, 16, 1)
+/* bellow mandatory from FEAT_Debugv8p9 */
+FIELD(WATCHPOINT_ISS, WPTV, 17, 1) /* FEAT_Debugv8p2 - WPT valid */
+FIELD(WATCHPOINT_ISS, WPT, 18, 6) /* FEAT_Debugv8p2 - missing WP number */
+
 static inline uint32_t syn_watchpoint(int same_el, int cm, int wnr)
 {
-    return (EC_WATCHPOINT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT)
-        | ARM_EL_IL | (cm << 8) | (wnr << 6) | 0x22;
+    uint32_t res = syn_set_ec(0, EC_WATCHPOINT + same_el);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, WATCHPOINT_ISS, CM, cm);
+    res = FIELD_DP32(res, WATCHPOINT_ISS, WNR, wnr);
+    res = FIELD_DP32(res, WATCHPOINT_ISS, DFSC, 0x22);
+
+    return res;
 }
 
+/*
+ * ISS encoding for an exception from a Breakpoint or a Vector Catch
+ * debug exception.
+ */
+FIELD(BREAKPOINT_ISS, IFSC, 0, 6)
+
 static inline uint32_t syn_breakpoint(int same_el)
 {
-    return (EC_BREAKPOINT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT)
-        | ARM_EL_IL | 0x22;
+    uint32_t res = syn_set_ec(0, EC_BREAKPOINT + same_el);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    res = FIELD_DP32(res, BREAKPOINT_ISS, IFSC, 0x22);
+
+    return res;
 }
 
 static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit)
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

This will help later when we expand the fields we report.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-13-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 20 +++++++++++++++++---
 1 file changed, 17 insertions(+), 3 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_breakpoint(int same_el)
     return res;
 }
 
+/*
+ * ISS encoding for an exception from a WF* instruction
+ */
+FIELD(WFX_ISS, TI, 0, 2)
+FIELD(WFX_ISS, RV, 2, 1)
+FIELD(WFX_ISS, RN, 5, 5)
+FIELD(WFX_ISS, COND, 20, 4)
+FIELD(WFX_ISS, CV, 24, 1)
+
 static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit)
 {
-    return (EC_WFX_TRAP << ARM_EL_EC_SHIFT) |
-           (is_16bit ? 0 : (1 << ARM_EL_IL_SHIFT)) |
-           (cv << 24) | (cond << 20) | ti;
+    uint32_t res = syn_set_ec(0, EC_WFX_TRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, !is_16bit);
+
+    res = FIELD_DP32(res, WFX_ISS, CV, cv);
+    res = FIELD_DP32(res, WFX_ISS, COND, cond);
+    res = FIELD_DP32(res, WFX_ISS, TI, ti);
+
+    return res;
 }
 
 static inline uint32_t syn_illegalstate(void)
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

Tweak arg names to make it clear raddr is the data address register
number.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-14-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 39 +++++++++++++++++++++++++++++++++------
 1 file changed, 33 insertions(+), 6 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_pcalignment(void)
     return res;
 }
 
+/*
+ * ISS encoding for a GCS exception
+ *
+ * Field validity depends on EXTYPE
+ */
+FIELD(GCS_ISS, IT, 0, 5)
+FIELD(GCS_ISS, RN, 5, 5) /* only for non EXLOCK exceptions */
+FIELD(GCS_ISS, RADDR, 10, 5) /* only for GCSSTR/GCSSTTR traps */
+FIELD(GCS_ISS, EXTYPE, 20, 4)
+
 static inline uint32_t syn_gcs_data_check(GCSInstructionType it, int rn)
 {
-    return ((EC_GCS << ARM_EL_EC_SHIFT) | ARM_EL_IL |
-            (GCS_ET_DataCheck << 20) | (rn << 5) | it);
+    uint32_t res = syn_set_ec(0, EC_GCS);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, GCS_ISS, EXTYPE, GCS_ET_DataCheck);
+    res = FIELD_DP32(res, GCS_ISS, RN, rn);
+    res = FIELD_DP32(res, GCS_ISS, IT, it);
+
+    return res;
 }
 
 static inline uint32_t syn_gcs_exlock(void)
 {
-    return (EC_GCS << ARM_EL_EC_SHIFT) | ARM_EL_IL | (GCS_ET_EXLOCK << 20);
+    uint32_t res = syn_set_ec(0, EC_GCS);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, GCS_ISS, EXTYPE, GCS_ET_EXLOCK);
+
+    return res;
 }
 
-static inline uint32_t syn_gcs_gcsstr(int ra, int rn)
+static inline uint32_t syn_gcs_gcsstr(int raddr, int rn)
 {
-    return ((EC_GCS << ARM_EL_EC_SHIFT) | ARM_EL_IL |
-            (GCS_ET_GCSSTR_GCSSTTR << 20) | (ra << 10) | (rn << 5));
+    uint32_t res = syn_set_ec(0, EC_GCS);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, GCS_ISS, EXTYPE, GCS_ET_GCSSTR_GCSSTTR);
+    res = FIELD_DP32(res, GCS_ISS, RADDR, raddr);
+    res = FIELD_DP32(res, GCS_ISS, RN, rn);
+
+    return res;
 }
 
 static inline uint32_t syn_serror(uint32_t extra)
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-15-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 33 +++++++++++++++++++++++++++++----
 1 file changed, 29 insertions(+), 4 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_serror(uint32_t extra)
     return res;
 }
 
+/*
+ * ISS encoding for an exception from the Memory Copy and Memory Set
+ * instructions.
+ */
+FIELD(MOP_ISS, SIZEREG, 0, 5)
+FIELD(MOP_ISS, SRCREG, 5, 5)
+FIELD(MOP_ISS, DESTREG, 10, 5)
+FIELD(MOP_ISS, FORMATOPT, 16, 2)
+FIELD(MOP_ISS, OPT_A, 16, 1)
+FIELD(MOP_ISS, WRONG_OPT, 17, 1)
+FIELD(MOP_ISS, EPILOGUE, 18, 1)
+FIELD(MOP_ISS, OPTIONS, 19, 4)
+FIELD(MOP_ISS, IS_SETG, 23, 1)
+FIELD(MOP_ISS, MEMINST, 24, 1)
+
 static inline uint32_t syn_mop(bool is_set, bool is_setg, int options,
                                bool epilogue, bool wrong_option, bool option_a,
                                int destreg, int srcreg, int sizereg)
 {
-    return (EC_MOP << ARM_EL_EC_SHIFT) | ARM_EL_IL |
-        (is_set << 24) | (is_setg << 23) | (options << 19) |
-        (epilogue << 18) | (wrong_option << 17) | (option_a << 16) |
-        (destreg << 10) | (srcreg << 5) | sizereg;
+    uint32_t res = syn_set_ec(0, EC_MOP);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, MOP_ISS, MEMINST, is_set);
+    res = FIELD_DP32(res, MOP_ISS, IS_SETG, is_setg);
+    res = FIELD_DP32(res, MOP_ISS, OPTIONS, options);
+    res = FIELD_DP32(res, MOP_ISS, EPILOGUE, epilogue);
+    res = FIELD_DP32(res, MOP_ISS, WRONG_OPT, wrong_option);
+    res = FIELD_DP32(res, MOP_ISS, OPT_A, option_a);
+    res = FIELD_DP32(res, MOP_ISS, DESTREG, destreg);
+    res = FIELD_DP32(res, MOP_ISS, SRCREG, srcreg);
+    res = FIELD_DP32(res, MOP_ISS, SIZEREG, sizereg);
+
+    return res;
 }
 
 
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

It shares the same COPROC_ISS encoding as the other CP traps although
not all the fields are used.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-16-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h       | 16 ++++++++++++++++
 target/arm/tcg/vfp_helper.c |  5 +----
 2 files changed, 17 insertions(+), 4 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ FIELD(COPROC_ISS, OP2, 17, 3)
 FIELD(COPROC_ISS, COND, 20, 4)
 FIELD(COPROC_ISS, CV, 24, 1)
 
+static inline uint32_t syn_cp10_rt_trap(int cv, int cond, int opc1,
+                                        int crn, int rt, int isread)
+{
+    uint32_t res = syn_set_ec(0, EC_FPIDTRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, COPROC_ISS, CV, cv);
+    res = FIELD_DP32(res, COPROC_ISS, COND, cond);
+    res = FIELD_DP32(res, COPROC_ISS, OP1, opc1);
+    res = FIELD_DP32(res, COPROC_ISS, CRN, crn);
+    res = FIELD_DP32(res, COPROC_ISS, RT, rt);
+    res = FIELD_DP32(res, COPROC_ISS, ISREAD, isread);
+
+    return res;
+}
+
 static inline uint32_t syn_cp14_rt_trap(int cv, int cond, int opc1, int opc2,
                                         int crn, int crm, int rt, int isread,
                                         bool is_16bit)
diff --git a/target/arm/tcg/vfp_helper.c b/target/arm/tcg/vfp_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/vfp_helper.c
+++ b/target/arm/tcg/vfp_helper.c
@@ -XXX,XX +XXX,XX @@ void HELPER(check_hcr_el2_trap)(CPUARMState *env, uint32_t rt, uint32_t reg)
         g_assert_not_reached();
     }
 
-    syndrome = ((EC_FPIDTRAP << ARM_EL_EC_SHIFT)
-                | ARM_EL_IL
-                | (1 << 24) | (0xe << 20) | (7 << 14)
-                | (reg << 10) | (rt << 5) | 1);
+    syndrome = syn_cp10_rt_trap(1, 0xe, 7, reg, rt, 1);
 
     raise_exception(env, EXCP_HYP_TRAP, syndrome, 2);
 }
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

One more step towards dropping the old #defines.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-17-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/helper.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/target/arm/helper.c b/target/arm/helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch32_hyp(CPUState *cs)
              */
             if (cs->exception_index == EXCP_PREFETCH_ABORT ||
                 (cs->exception_index == EXCP_DATA_ABORT &&
-                 !(env->exception.syndrome & ARM_EL_ISV)) ||
+                 !FIELD_EX32(env->exception.syndrome, SYNDROME, IL)) ||
                 syn_get_ec(env->exception.syndrome) == EC_UNCATEGORIZED) {
-                env->exception.syndrome &= ~ARM_EL_IL;
+                env->exception.syndrome = FIELD_DP32(env->exception.syndrome, SYNDROME, IL, 0);
             }
         }
         env->cp15.esr_el[2] = env->exception.syndrome;
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

This removes the last use of ARM_EL_EC_SHIFT.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-18-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h  | 1 -
 target/arm/tcg/debug.c | 2 +-
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ typedef enum {
 } GCSInstructionType;
 
 #define ARM_EL_EC_LENGTH 6
-#define ARM_EL_EC_SHIFT 26
 #define ARM_EL_IL_SHIFT 25
 #define ARM_EL_ISV_SHIFT 24
 #define ARM_EL_IL (1 << ARM_EL_IL_SHIFT)
diff --git a/target/arm/tcg/debug.c b/target/arm/tcg/debug.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/debug.c
+++ b/target/arm/tcg/debug.c
@@ -XXX,XX +XXX,XX @@ raise_exception_debug(CPUARMState *env, uint32_t excp, uint32_t syndrome)
      * Similarly for watchpoint and breakpoint matches.
      */
     assert(debug_el >= cur_el);
-    syndrome |= (debug_el == cur_el) << ARM_EL_EC_SHIFT;
+    syndrome |= (debug_el == cur_el) << R_SYNDROME_EC_SHIFT;
     raise_exception(env, excp, syndrome, debug_el);
 }
 
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

Rather than open coding a bunch of shifts and masks we can use the
syndrome definitions. While we are at it assert it really is a
EC_DATAABORT.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-19-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/whpx/whpx-all.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/target/arm/whpx/whpx-all.c b/target/arm/whpx/whpx-all.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/whpx/whpx-all.c
+++ b/target/arm/whpx/whpx-all.c
@@ -XXX,XX +XXX,XX @@ static int whpx_handle_mmio(CPUState *cpu, WHV_MEMORY_ACCESS_CONTEXT *ctx)
 {
     uint64_t syndrome = ctx->Syndrome;
 
-    bool isv = syndrome & ARM_EL_ISV;
-    bool iswrite = (syndrome >> 6) & 1;
-    bool sse = (syndrome >> 21) & 1;
-    uint32_t sas = (syndrome >> 22) & 3;
+    bool isv = FIELD_EX32(syndrome, DABORT_ISS, ISV);
+    bool iswrite = FIELD_EX32(syndrome, DABORT_ISS, WNR);
+    bool sse = FIELD_EX32(syndrome, DABORT_ISS, SSE);
+    uint32_t sas = FIELD_EX32(syndrome, DABORT_ISS, SAS);
     uint32_t len = 1 << sas;
-    uint32_t srt = (syndrome >> 16) & 0x1f;
-    uint32_t cm = (syndrome >> 8) & 0x1;
+    uint32_t srt = FIELD_EX32(syndrome, DABORT_ISS, SRT);
+    uint32_t cm = FIELD_EX32(syndrome, DABORT_ISS, CM);
     uint64_t val = 0;
 
+    assert(syn_get_ec(syndrome) == EC_DATAABORT);
     assert(!cm);
     assert(isv);
 
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

Rather than open coding a bunch of shifts and masks we can use the
syndrome definitions.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20260422125250.1303100-20-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/hvf/hvf.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/target/arm/hvf/hvf.c b/target/arm/hvf/hvf.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/hvf/hvf.c
+++ b/target/arm/hvf/hvf.c
@@ -XXX,XX +XXX,XX @@ static int hvf_handle_exception(CPUState *cpu, hv_vcpu_exit_exception_t *excp)
         break;
     }
     case EC_DATAABORT: {
-        bool isv = syndrome & ARM_EL_ISV;
-        bool iswrite = (syndrome >> 6) & 1;
-        bool s1ptw = (syndrome >> 7) & 1;
-        bool sse = (syndrome >> 21) & 1;
-        uint32_t sas = (syndrome >> 22) & 3;
+        bool isv = FIELD_EX32(syndrome, DABORT_ISS, ISV);
+        bool iswrite = FIELD_EX32(syndrome, DABORT_ISS, WNR);
+        bool s1ptw = FIELD_EX32(syndrome, DABORT_ISS, S1PTW);
+        bool sse = FIELD_EX32(syndrome, DABORT_ISS, SSE);
+        uint32_t sas = FIELD_EX32(syndrome, DABORT_ISS, SAS);
         uint32_t len = 1 << sas;
-        uint32_t srt = (syndrome >> 16) & 0x1f;
-        uint32_t cm = (syndrome >> 8) & 0x1;
+        uint32_t srt = FIELD_EX32(syndrome, DABORT_ISS, SRT);
+        uint32_t cm = FIELD_EX32(syndrome, DABORT_ISS, CM);
         uint64_t val = 0;
         uint64_t ipa = excp->physical_address;
         AddressSpace *as = cpu_get_address_space(cpu, ARMASIdx_NS);
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

One more step to removing the old defines.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-21-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/tlb_helper.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

From: Alex Bennée <alex.bennee@linaro.org>

These are only valid for data abort syndromes.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-22-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/tlb_helper.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/target/arm/tcg/tlb_helper.c b/target/arm/tcg/tlb_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/tlb_helper.c
+++ b/target/arm/tcg/tlb_helper.c
@@ -XXX,XX +XXX,XX @@ static inline uint64_t merge_syn_data_abort(uint32_t template_syn,
      * ST64BV, or ST64BV0 insns report syndrome info even for stage-1
      * faults and regardless of the target EL.
      */
-    if (template_syn & ARM_EL_VNCR) {
+    if (FIELD_EX32(template_syn, DABORT_ISS, VNCR)) {
         /*
          * FEAT_NV2 faults on accesses via VNCR_EL2 are a special case:
          * they are always reported as "same EL", even though we are going
@@ -XXX,XX +XXX,XX @@ void arm_deliver_fault(ARMCPU *cpu, vaddr addr,
      * because we masked that out in disas_set_insn_syndrome())
      */
     bool is_vncr = (access_type != MMU_INST_FETCH) &&
-        (env->exception.syndrome & ARM_EL_VNCR);
+        FIELD_EX32(env->exception.syndrome, DABORT_ISS, VNCR);
 
     if (is_vncr) {
         /* FEAT_NV2 faults on accesses via VNCR_EL2 go to EL2 */
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

Now everything is defined with registerfields we can drop the old
defines.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-23-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 9 ---------
 1 file changed, 9 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ typedef enum {
     GCS_IT_GCSPOPX = 9,
 } GCSInstructionType;
 
-#define ARM_EL_EC_LENGTH 6
-#define ARM_EL_IL_SHIFT 25
-#define ARM_EL_ISV_SHIFT 24
-#define ARM_EL_IL (1 << ARM_EL_IL_SHIFT)
-#define ARM_EL_ISV (1 << ARM_EL_ISV_SHIFT)
-
-/* In the Data Abort syndrome */
-#define ARM_EL_VNCR (1 << 13)
-
 static inline uint32_t syn_get_ec(uint32_t syn)
 {
     return FIELD_EX32(syn, SYNDROME, EC);
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

Pass the register number (rd) to the wfit helper and report it in the
syndrome ISS.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-24-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h          | 11 ++++++++++-
 target/arm/tcg/helper-defs.h   |  2 +-
 target/arm/tcg/op_helper.c     |  7 ++++---
 target/arm/tcg/translate-a64.c |  2 +-
 4 files changed, 16 insertions(+), 6 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ FIELD(WFX_ISS, RN, 5, 5)
 FIELD(WFX_ISS, COND, 20, 4)
 FIELD(WFX_ISS, CV, 24, 1)
 
-static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit)
+typedef enum {
+    WFI = 0b00,
+    WFE = 0b01,
+    WFIT = 0b10,
+    WFET = 0xb11
+} wfx_ti;
+
+static inline uint32_t syn_wfx(int cv, int cond, int rn, bool rv, wfx_ti ti, bool is_16bit)
 {
     uint32_t res = syn_set_ec(0, EC_WFX_TRAP);
     res = FIELD_DP32(res, SYNDROME, IL, !is_16bit);
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit)
     res = FIELD_DP32(res, WFX_ISS, CV, cv);
     res = FIELD_DP32(res, WFX_ISS, COND, cond);
     res = FIELD_DP32(res, WFX_ISS, TI, ti);
+    res = FIELD_DP32(res, WFX_ISS, RN, rn);
+    res = FIELD_DP32(res, WFX_ISS, RV, rv);
 
     return res;
 }
diff --git a/target/arm/tcg/helper-defs.h b/target/arm/tcg/helper-defs.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/helper-defs.h
+++ b/target/arm/tcg/helper-defs.h
@@ -XXX,XX +XXX,XX @@ DEF_HELPER_2(exception_pc_alignment, noreturn, env, vaddr)
 DEF_HELPER_1(setend, void, env)
 DEF_HELPER_2(wfi, void, env, i32)
 DEF_HELPER_1(wfe, void, env)
-DEF_HELPER_2(wfit, void, env, i64)
+DEF_HELPER_2(wfit, void, env, i32)
 DEF_HELPER_1(yield, void, env)
 DEF_HELPER_1(pre_hvc, void, env)
 DEF_HELPER_2(pre_smc, void, env, i32)
diff --git a/target/arm/tcg/op_helper.c b/target/arm/tcg/op_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/op_helper.c
+++ b/target/arm/tcg/op_helper.c
@@ -XXX,XX +XXX,XX @@ void HELPER(wfi)(CPUARMState *env, uint32_t insn_len)
             env->regs[15] -= insn_len;
         }
 
-        raise_exception(env, excp, syn_wfx(1, 0xe, 0, insn_len == 2),
+        raise_exception(env, excp, syn_wfx(1, 0xe, 0, false, WFI, insn_len == 2),
                         target_el);
     }
 
@@ -XXX,XX +XXX,XX @@ void HELPER(wfi)(CPUARMState *env, uint32_t insn_len)
 #endif
 }
 
-void HELPER(wfit)(CPUARMState *env, uint64_t timeout)
+void HELPER(wfit)(CPUARMState *env, uint32_t rd)
 {
 #ifdef CONFIG_USER_ONLY
     /*
@@ -XXX,XX +XXX,XX @@ void HELPER(wfit)(CPUARMState *env, uint64_t timeout)
     int target_el = check_wfx_trap(env, false, &excp);
     /* The WFIT should time out when CNTVCT_EL0 >= the specified value. */
     uint64_t cntval = gt_get_countervalue(env);
+    uint64_t timeout = env->xregs[rd];
     /*
      * We want the value that we would get if we read CNTVCT_EL0 from
      * the current exception level, so the direct_access offset, not
@@ -XXX,XX +XXX,XX @@ void HELPER(wfit)(CPUARMState *env, uint64_t timeout)
 
     if (target_el) {
         env->pc -= 4;
-        raise_exception(env, excp, syn_wfx(1, 0xe, 2, false), target_el);
+        raise_exception(env, excp, syn_wfx(1, 0xe, rd, true, WFIT, false), target_el);
     }
 
     if (uadd64_overflow(timeout, offset, &nexttick)) {
diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-a64.c
+++ b/target/arm/tcg/translate-a64.c
@@ -XXX,XX +XXX,XX @@ static bool trans_WFIT(DisasContext *s, arg_WFIT *a)
     }
 
     gen_a64_update_pc(s, 4);
-    gen_helper_wfit(tcg_env, cpu_reg(s, a->rd));
+    gen_helper_wfit(tcg_env, tcg_constant_i32(a->rd));
     /* Go back to the main loop to check for interrupts */
     s->base.is_jmp = DISAS_EXIT;
     return true;
-- 
2.43.0