Series comparison

The following changes since commit 9d662a6b22a0838a85c5432385f35db2488a33a5:

Merge remote-tracking branch 'remotes/legoater/tags/pull-ppc-20220305' into staging (2022-03-05 18:03:15 +0000)

are available in the Git repository at:

https://gitlab.com/hreitz/qemu.git tags/pull-block-2022-03-07

for you to fetch changes up to 743da0b401cdc3ee94bc519975e339a3cdbe0ad1:

iotests/image-fleecing: test push backup with fleecing (2022-03-07 09:33:31 +0100)

----------------------------------------------------------------
Block patches for 7.0-rc0:
- New fleecing backup scheme
- iotest fixes
- Fixes for the curl block driver
- Fix for the preallocate block driver
- IDE fix for zero-length TRIM requests

----------------------------------------------------------------
Hanna Reitz (2):
  ide: Increment BB in-flight counter for TRIM BH
  iotests: Write test output to TEST_DIR

Peter Maydell (2):
  block/curl.c: Set error message string if curl_init_state() fails
  block/curl.c: Check error return from curl_easy_setopt()

Thomas Huth (2):
  tests/qemu-iotests/040: Skip TestCommitWithFilters without 'throttle'
  tests/qemu-iotests/testrunner: Quote "case not run" lines in TAP mode

Vladimir Sementsov-Ogievskiy (17):
  block: fix preallocate filter: don't do unaligned preallocate requests
  block/block-copy: move copy_bitmap initialization to
    block_copy_state_new()
  block/dirty-bitmap: bdrv_merge_dirty_bitmap(): add return value
  block/block-copy: block_copy_state_new(): add bitmap parameter
  block/copy-before-write: add bitmap open parameter
  block/block-copy: add block_copy_reset()
  block: intoduce reqlist
  block/reqlist: reqlist_find_conflict(): use ranges_overlap()
  block/dirty-bitmap: introduce bdrv_dirty_bitmap_status()
  block/reqlist: add reqlist_wait_all()
  block/io: introduce block driver snapshot-access API
  block: introduce snapshot-access block driver
  block: copy-before-write: realize snapshot-access API
  iotests/image-fleecing: add test-case for fleecing format node
  iotests.py: add qemu_io_pipe_and_status()
  iotests/image-fleecing: add test case with bitmap
  iotests/image-fleecing: test push backup with fleecing

-- 
2.34.1

When we still have an AIOCB registered for DMA operations, we try to
settle the respective operation by draining the BlockBackend associated
with the IDE device.

However, this assumes that every DMA operation is associated with an
increment of the BlockBackend’s in-flight counter (e.g. through some
ongoing I/O operation), so that draining the BB until its in-flight
counter reaches 0 will settle all DMA operations.  That is not the case:
For TRIM, the guest can issue a zero-length operation that will not
result in any I/O operation forwarded to the BlockBackend, and also not
increment the in-flight counter in any other way.  In such a case,
blk_drain() will be a no-op if no other operations are in flight.

It is clear that if blk_drain() is a no-op, the value of
s->bus->dma->aiocb will not change between checking it in the `if`
condition and asserting that it is NULL after blk_drain().

The particular problem is that ide_issue_trim() creates a BH
(ide_trim_bh_cb()) to settle the TRIM request: iocb->common.cb() is
ide_dma_cb(), which will either create a new request, or find the
transfer to be done and call ide_set_inactive(), which clears
s->bus->dma->aiocb.  Therefore, the blk_drain() must wait for
ide_trim_bh_cb() to run, which currently it will not always do.

To fix this issue, we increment the BlockBackend's in-flight counter
when the TRIM operation begins (in ide_issue_trim(), when the
ide_trim_bh_cb() BH is created) and decrement it when ide_trim_bh_cb()
is done.

Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2029980
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220120142259.120189-1-hreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Tested-by: John Snow <jsnow@redhat.com>
---
 hw/ide/core.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/hw/ide/core.c b/hw/ide/core.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/ide/core.c
+++ b/hw/ide/core.c
@@ -XXX,XX +XXX,XX @@ static const AIOCBInfo trim_aiocb_info = {
 static void ide_trim_bh_cb(void *opaque)
 {
     TrimAIOCB *iocb = opaque;
+    BlockBackend *blk = iocb->s->blk;
 
     iocb->common.cb(iocb->common.opaque, iocb->ret);
 
     qemu_bh_delete(iocb->bh);
     iocb->bh = NULL;
     qemu_aio_unref(iocb);
+
+    /* Paired with an increment in ide_issue_trim() */
+    blk_dec_in_flight(blk);
 }
 
 static void ide_issue_trim_cb(void *opaque, int ret)
@@ -XXX,XX +XXX,XX @@ BlockAIOCB *ide_issue_trim(
     IDEState *s = opaque;
     TrimAIOCB *iocb;
 
+    /* Paired with a decrement in ide_trim_bh_cb() */
+    blk_inc_in_flight(s->blk);
+
     iocb = blk_aio_get(&trim_aiocb_info, s->blk, cb, cb_opaque);
     iocb->s = s;
     iocb->bh = qemu_bh_new(ide_trim_bh_cb, iocb);
-- 
2.34.1

From: Peter Maydell <peter.maydell@linaro.org>

In curl_open(), the 'out' label assumes that the state->errmsg string
has been set (either by curl_easy_perform() or by manually copying a
string into it); however if curl_init_state() fails we will jump to
that label without setting the string.  Add the missing error string
setup.

(We can't be specific about the cause of failure: the documentation
of curl_easy_init() just says "If this function returns NULL,
something went wrong".)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220222152341.850419-2-peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
---
 block/curl.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/block/curl.c b/block/curl.c
index XXXXXXX..XXXXXXX 100644
--- a/block/curl.c
+++ b/block/curl.c
@@ -XXX,XX +XXX,XX @@ static int curl_open(BlockDriverState *bs, QDict *options, int flags,
     // Get file size
 
     if (curl_init_state(s, state) < 0) {
+        pstrcpy(state->errmsg, CURL_ERROR_SIZE,
+                "curl library initialization failed.");
         goto out;
     }
 
-- 
2.34.1

From: Peter Maydell <peter.maydell@linaro.org>

Coverity points out that we aren't checking the return value
from curl_easy_setopt() for any of the calls to it we make
in block/curl.c.

Some of these options are documented as always succeeding (e.g.
CURLOPT_VERBOSE) but others have documented failure cases (e.g.
CURLOPT_URL).  For consistency we check every call, even the ones
that theoretically cannot fail.

Fixes: Coverity CID 1459336, 1459482, 1460331
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220222152341.850419-3-peter.maydell@linaro.org>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
---
 block/curl.c | 90 +++++++++++++++++++++++++++++++++-------------------
 1 file changed, 57 insertions(+), 33 deletions(-)

diff --git a/block/curl.c b/block/curl.c
index XXXXXXX..XXXXXXX 100644
--- a/block/curl.c
+++ b/block/curl.c
@@ -XXX,XX +XXX,XX @@ static int curl_init_state(BDRVCURLState *s, CURLState *state)
         if (!state->curl) {
             return -EIO;
         }
-        curl_easy_setopt(state->curl, CURLOPT_URL, s->url);
-        curl_easy_setopt(state->curl, CURLOPT_SSL_VERIFYPEER,
-                         (long) s->sslverify);
-        curl_easy_setopt(state->curl, CURLOPT_SSL_VERIFYHOST,
-                         s->sslverify ? 2L : 0L);
+        if (curl_easy_setopt(state->curl, CURLOPT_URL, s->url) ||
+            curl_easy_setopt(state->curl, CURLOPT_SSL_VERIFYPEER,
+                             (long) s->sslverify) ||
+            curl_easy_setopt(state->curl, CURLOPT_SSL_VERIFYHOST,
+                             s->sslverify ? 2L : 0L)) {
+            goto err;
+        }
         if (s->cookie) {
-            curl_easy_setopt(state->curl, CURLOPT_COOKIE, s->cookie);
+            if (curl_easy_setopt(state->curl, CURLOPT_COOKIE, s->cookie)) {
+                goto err;
+            }
+        }
+        if (curl_easy_setopt(state->curl, CURLOPT_TIMEOUT, (long)s->timeout) ||
+            curl_easy_setopt(state->curl, CURLOPT_WRITEFUNCTION,
+                             (void *)curl_read_cb) ||
+            curl_easy_setopt(state->curl, CURLOPT_WRITEDATA, (void *)state) ||
+            curl_easy_setopt(state->curl, CURLOPT_PRIVATE, (void *)state) ||
+            curl_easy_setopt(state->curl, CURLOPT_AUTOREFERER, 1) ||
+            curl_easy_setopt(state->curl, CURLOPT_FOLLOWLOCATION, 1) ||
+            curl_easy_setopt(state->curl, CURLOPT_NOSIGNAL, 1) ||
+            curl_easy_setopt(state->curl, CURLOPT_ERRORBUFFER, state->errmsg) ||
+            curl_easy_setopt(state->curl, CURLOPT_FAILONERROR, 1)) {
+            goto err;
         }
-        curl_easy_setopt(state->curl, CURLOPT_TIMEOUT, (long)s->timeout);
-        curl_easy_setopt(state->curl, CURLOPT_WRITEFUNCTION,
-                         (void *)curl_read_cb);
-        curl_easy_setopt(state->curl, CURLOPT_WRITEDATA, (void *)state);
-        curl_easy_setopt(state->curl, CURLOPT_PRIVATE, (void *)state);
-        curl_easy_setopt(state->curl, CURLOPT_AUTOREFERER, 1);
-        curl_easy_setopt(state->curl, CURLOPT_FOLLOWLOCATION, 1);
-        curl_easy_setopt(state->curl, CURLOPT_NOSIGNAL, 1);
-        curl_easy_setopt(state->curl, CURLOPT_ERRORBUFFER, state->errmsg);
-        curl_easy_setopt(state->curl, CURLOPT_FAILONERROR, 1);
-
         if (s->username) {
-            curl_easy_setopt(state->curl, CURLOPT_USERNAME, s->username);
+            if (curl_easy_setopt(state->curl, CURLOPT_USERNAME, s->username)) {
+                goto err;
+            }
         }
         if (s->password) {
-            curl_easy_setopt(state->curl, CURLOPT_PASSWORD, s->password);
+            if (curl_easy_setopt(state->curl, CURLOPT_PASSWORD, s->password)) {
+                goto err;
+            }
         }
         if (s->proxyusername) {
-            curl_easy_setopt(state->curl,
-                             CURLOPT_PROXYUSERNAME, s->proxyusername);
+            if (curl_easy_setopt(state->curl,
+                                 CURLOPT_PROXYUSERNAME, s->proxyusername)) {
+                goto err;
+            }
         }
         if (s->proxypassword) {
-            curl_easy_setopt(state->curl,
-                             CURLOPT_PROXYPASSWORD, s->proxypassword);
+            if (curl_easy_setopt(state->curl,
+                                 CURLOPT_PROXYPASSWORD, s->proxypassword)) {
+                goto err;
+            }
         }
 
         /* Restrict supported protocols to avoid security issues in the more
@@ -XXX,XX +XXX,XX @@ static int curl_init_state(BDRVCURLState *s, CURLState *state)
          * Restricting protocols is only supported from 7.19.4 upwards.
          */
 #if LIBCURL_VERSION_NUM >= 0x071304
-        curl_easy_setopt(state->curl, CURLOPT_PROTOCOLS, PROTOCOLS);
-        curl_easy_setopt(state->curl, CURLOPT_REDIR_PROTOCOLS, PROTOCOLS);
+        if (curl_easy_setopt(state->curl, CURLOPT_PROTOCOLS, PROTOCOLS) ||
+            curl_easy_setopt(state->curl, CURLOPT_REDIR_PROTOCOLS, PROTOCOLS)) {
+            goto err;
+        }
 #endif
 
 #ifdef DEBUG_VERBOSE
-        curl_easy_setopt(state->curl, CURLOPT_VERBOSE, 1);
+        if (curl_easy_setopt(state->curl, CURLOPT_VERBOSE, 1)) {
+            goto err;
+        }
 #endif
     }
 
     state->s = s;
 
     return 0;
+
+err:
+    curl_easy_cleanup(state->curl);
+    state->curl = NULL;
+    return -EIO;
 }
 
 /* Called with s->mutex held.  */
@@ -XXX,XX +XXX,XX @@ static int curl_open(BlockDriverState *bs, QDict *options, int flags,
     }
 
     s->accept_range = false;
-    curl_easy_setopt(state->curl, CURLOPT_NOBODY, 1);
-    curl_easy_setopt(state->curl, CURLOPT_HEADERFUNCTION,
-                     curl_header_cb);
-    curl_easy_setopt(state->curl, CURLOPT_HEADERDATA, s);
+    if (curl_easy_setopt(state->curl, CURLOPT_NOBODY, 1) ||
+        curl_easy_setopt(state->curl, CURLOPT_HEADERFUNCTION, curl_header_cb) ||
+        curl_easy_setopt(state->curl, CURLOPT_HEADERDATA, s)) {
+        pstrcpy(state->errmsg, CURL_ERROR_SIZE,
+                "curl library initialization failed.");
+        goto out;
+    }
     if (curl_easy_perform(state->curl))
         goto out;
     if (curl_easy_getinfo(state->curl, CURLINFO_CONTENT_LENGTH_DOWNLOAD, &d)) {
@@ -XXX,XX +XXX,XX @@ static void curl_setup_preadv(BlockDriverState *bs, CURLAIOCB *acb)
 
     snprintf(state->range, 127, "%" PRIu64 "-%" PRIu64, start, end);
     trace_curl_setup_preadv(acb->bytes, start, state->range);
-    curl_easy_setopt(state->curl, CURLOPT_RANGE, state->range);
-
-    if (curl_multi_add_handle(s->multi, state->curl) != CURLM_OK) {
+    if (curl_easy_setopt(state->curl, CURLOPT_RANGE, state->range) ||
+        curl_multi_add_handle(s->multi, state->curl) != CURLM_OK) {
         state->acb[0] = NULL;
         acb->ret = -EIO;
 
-- 
2.34.1

From: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>

There is a bug in handling BDRV_REQ_NO_WAIT flag: we still may wait in
wait_serialising_requests() if request is unaligned. And this is
possible for the only user of this flag (preallocate filter) if
underlying file is unaligned to its request_alignment on start.

So, we have to fix preallocate filter to do only aligned preallocate
requests.

Next, we should fix generic block/io.c somehow. Keeping in mind that
preallocate is the only user of BDRV_REQ_NO_WAIT and that we have to
fix its behavior now, it seems more safe to just assert that we never
use BDRV_REQ_NO_WAIT with unaligned requests and add corresponding
comment. Let's do so.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Message-Id: <20220215121609.38570-1-vsementsov@virtuozzo.com>
[hreitz: Rebased on block GS/IO split]
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
---
 include/block/block-common.h |  3 ++-
 block/io.c                   |  4 ++++
 block/preallocate.c          | 15 ++++++++++++---
 3 files changed, 18 insertions(+), 4 deletions(-)

diff --git a/include/block/block-common.h b/include/block/block-common.h
index XXXXXXX..XXXXXXX 100644
--- a/include/block/block-common.h
+++ b/include/block/block-common.h
@@ -XXX,XX +XXX,XX @@ typedef enum {
 
     /*
      * If we need to wait for other requests, just fail immediately. Used
-     * only together with BDRV_REQ_SERIALISING.
+     * only together with BDRV_REQ_SERIALISING. Used only with requests aligned
+     * to request_alignment (corresponding assertions are in block/io.c).
      */
     BDRV_REQ_NO_WAIT = 0x400,
 
diff --git a/block/io.c b/block/io.c
index XXXXXXX..XXXXXXX 100644
--- a/block/io.c
+++ b/block/io.c
@@ -XXX,XX +XXX,XX @@ static int coroutine_fn bdrv_co_do_zero_pwritev(BdrvChild *child,
 
     padding = bdrv_init_padding(bs, offset, bytes, &pad);
     if (padding) {
+        assert(!(flags & BDRV_REQ_NO_WAIT));
         bdrv_make_request_serialising(req, align);
 
         bdrv_padding_rmw_read(child, req, &pad, true);
@@ -XXX,XX +XXX,XX @@ int coroutine_fn bdrv_co_pwritev_part(BdrvChild *child,
          * serialize the request to prevent interactions of the
          * widened region with other transactions.
          */
+        assert(!(flags & BDRV_REQ_NO_WAIT));
         bdrv_make_request_serialising(&req, align);
         bdrv_padding_rmw_read(child, &req, &pad, false);
     }
@@ -XXX,XX +XXX,XX @@ static int coroutine_fn bdrv_co_copy_range_internal(
     /* TODO We can support BDRV_REQ_NO_FALLBACK here */
     assert(!(read_flags & BDRV_REQ_NO_FALLBACK));
     assert(!(write_flags & BDRV_REQ_NO_FALLBACK));
+    assert(!(read_flags & BDRV_REQ_NO_WAIT));
+    assert(!(write_flags & BDRV_REQ_NO_WAIT));
 
     if (!dst || !dst->bs || !bdrv_is_inserted(dst->bs)) {
         return -ENOMEDIUM;
diff --git a/block/preallocate.c b/block/preallocate.c
index XXXXXXX..XXXXXXX 100644
--- a/block/preallocate.c
+++ b/block/preallocate.c
@@ -XXX,XX +XXX,XX @@ static bool coroutine_fn handle_write(BlockDriverState *bs, int64_t offset,
     int64_t end = offset + bytes;
     int64_t prealloc_start, prealloc_end;
     int ret;
+    uint32_t file_align = bs->file->bs->bl.request_alignment;
+    uint32_t prealloc_align = MAX(s->opts.prealloc_align, file_align);
+
+    assert(QEMU_IS_ALIGNED(prealloc_align, file_align));
 
     if (!has_prealloc_perms(bs)) {
         /* We don't have state neither should try to recover it */
@@ -XXX,XX +XXX,XX @@ static bool coroutine_fn handle_write(BlockDriverState *bs, int64_t offset,
 
     /* Now we want new preallocation, as request writes beyond s->file_end. */
 
-    prealloc_start = want_merge_zero ? MIN(offset, s->file_end) : s->file_end;
-    prealloc_end = QEMU_ALIGN_UP(end + s->opts.prealloc_size,
-                                 s->opts.prealloc_align);
+    prealloc_start = QEMU_ALIGN_UP(
+            want_merge_zero ? MIN(offset, s->file_end) : s->file_end,
+            file_align);
+    prealloc_end = QEMU_ALIGN_UP(
+            MAX(prealloc_start, end) + s->opts.prealloc_size,
+            prealloc_align);
+
+    want_merge_zero = want_merge_zero && (prealloc_start <= offset);
 
     ret = bdrv_co_pwrite_zeroes(
             bs->file, prealloc_start, prealloc_end - prealloc_start,
-- 
2.34.1

From: Thomas Huth <thuth@redhat.com>

iotest 040 already has some checks for the availability of the 'throttle'
driver, but some new code has been added in the course of time that
depends on 'throttle' but does not check for its availability. Add
a check to the TestCommitWithFilters class so that this iotest now
also passes again if 'throttle' has not been enabled in the QEMU
binaries.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220223123127.3206042-1-thuth@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
---
 tests/qemu-iotests/040 | 1 +
 1 file changed, 1 insertion(+)

diff --git a/tests/qemu-iotests/040 b/tests/qemu-iotests/040
index XXXXXXX..XXXXXXX 100755
--- a/tests/qemu-iotests/040
+++ b/tests/qemu-iotests/040
@@ -XXX,XX +XXX,XX @@ class TestCommitWithFilters(iotests.QMPTestCase):
                              pattern_file)
             self.assertFalse('Pattern verification failed' in result)
 
+    @iotests.skip_if_unsupported(['throttle'])
     def setUp(self):
         qemu_img('create', '-f', iotests.imgfmt, self.img0, '64M')
         qemu_img('create', '-f', iotests.imgfmt, self.img1, '64M')
-- 
2.34.1

From: Thomas Huth <thuth@redhat.com>

In TAP mode, the stdout is reserved for the TAP protocol, so we
have to make sure to mark other lines with a comment '#' character
at the beginning to avoid that the TAP parser at the other end
gets confused.

To test this condition, run "configure" for example with:

--block-drv-rw-whitelist=copy-before-write,qcow2,raw,file,host_device,blkdebug,null-co,copy-on-read

so that iotest 041 will report that some tests are not run due to
the missing "quorum" driver. Without this change, "make check-block"
fails since the meson tap parser gets confused by these messages.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220223124353.3273898-1-thuth@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
---
 tests/qemu-iotests/testrunner.py | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/tests/qemu-iotests/testrunner.py b/tests/qemu-iotests/testrunner.py
index XXXXXXX..XXXXXXX 100644
--- a/tests/qemu-iotests/testrunner.py
+++ b/tests/qemu-iotests/testrunner.py
@@ -XXX,XX +XXX,XX @@ def run_test(self, test: str,
                                  description=res.description)
 
         if res.casenotrun:
-            print(res.casenotrun)
+            if self.tap:
+                print('#' + res.casenotrun.replace('\n', '\n#'))
+            else:
+                print(res.casenotrun)
 
         return res
 
-- 
2.34.1

Drop the use of OUTPUT_DIR (test/qemu-iotests under the build
directory), and instead write test output files (.out.bad, .notrun, and
.casenotrun) to TEST_DIR.

With this, the same test can be run concurrently without the separate
instances interfering, because they will need separate TEST_DIRs anyway.
Running the same test separately is useful when running the iotests with
various format/protocol combinations in parallel, or when you just want
to aggressively exercise a single test (e.g. when it fails only
sporadically).

Putting this output into TEST_DIR means that it will stick around for
inspection after the test run is done (though running the same test in
the same TEST_DIR will overwrite it, just as it used to be); but given
that TEST_DIR is a scratch directory, it should be clear that users can
delete all of its content at any point.  (And if TEST_DIR is on tmpfs,
it will just disappear on shutdown.)  Contrarily, alternative approaches
that would put these output files into OUTPUT_DIR with some prefix to
differentiate between separate test runs might easily lead to cluttering
OUTPUT_DIR.

(This change means OUTPUT_DIR is no longer written to by the iotests, so
we can drop its usage altogether.)

Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220221172909.762858-1-hreitz@redhat.com>
[hreitz: Simplified `Path(os.path.join(x, y))` to `Path(x, y)`, as
         suggested by Vladimir; and rebased on 9086c7639822b6
         ("tests/qemu-iotests: Rework the checks and spots using GNU
         sed")]
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
---
 tests/qemu-iotests/common.rc     |  6 +++---
 tests/qemu-iotests/iotests.py    |  5 ++---
 tests/qemu-iotests/testenv.py    |  5 +----
 tests/qemu-iotests/testrunner.py | 14 ++++++++------
 4 files changed, 14 insertions(+), 16 deletions(-)

diff --git a/tests/qemu-iotests/common.rc b/tests/qemu-iotests/common.rc
index XXXXXXX..XXXXXXX 100644
--- a/tests/qemu-iotests/common.rc
+++ b/tests/qemu-iotests/common.rc
@@ -XXX,XX +XXX,XX @@
 # bail out, setting up .notrun file
 _notrun()
 {
-    echo "$*" >"$OUTPUT_DIR/$seq.notrun"
+    echo "$*" >"$TEST_DIR/$seq.notrun"
     echo "$seq not run: $*"
     status=0
     exit
@@ -XXX,XX +XXX,XX @@ _img_info()
 #
 _casenotrun()
 {
-    echo "    [case not run] $*" >>"$OUTPUT_DIR/$seq.casenotrun"
+    echo "    [case not run] $*" >>"$TEST_DIR/$seq.casenotrun"
 }
 
 # just plain bail out
 #
 _fail()
 {
-    echo "$*" | tee -a "$OUTPUT_DIR/$seq.full"
+    echo "$*" | tee -a "$TEST_DIR/$seq.full"
     echo "(see $seq.full for details)"
     status=1
     exit 1
diff --git a/tests/qemu-iotests/iotests.py b/tests/qemu-iotests/iotests.py
index XXXXXXX..XXXXXXX 100644
--- a/tests/qemu-iotests/iotests.py
+++ b/tests/qemu-iotests/iotests.py
@@ -XXX,XX +XXX,XX @@
 
 imgfmt = os.environ.get('IMGFMT', 'raw')
 imgproto = os.environ.get('IMGPROTO', 'file')
-output_dir = os.environ.get('OUTPUT_DIR', '.')
 
 try:
     test_dir = os.environ['TEST_DIR']
@@ -XXX,XX +XXX,XX @@ def notrun(reason):
     # Each test in qemu-iotests has a number ("seq")
     seq = os.path.basename(sys.argv[0])
 
-    with open('%s/%s.notrun' % (output_dir, seq), 'w', encoding='utf-8') \
+    with open('%s/%s.notrun' % (test_dir, seq), 'w', encoding='utf-8') \
             as outfile:
         outfile.write(reason + '\n')
     logger.warning("%s not run: %s", seq, reason)
@@ -XXX,XX +XXX,XX @@ def case_notrun(reason):
     # Each test in qemu-iotests has a number ("seq")
     seq = os.path.basename(sys.argv[0])
 
-    with open('%s/%s.casenotrun' % (output_dir, seq), 'a', encoding='utf-8') \
+    with open('%s/%s.casenotrun' % (test_dir, seq), 'a', encoding='utf-8') \
             as outfile:
         outfile.write('    [case not run] ' + reason + '\n')
 
diff --git a/tests/qemu-iotests/testenv.py b/tests/qemu-iotests/testenv.py
index XXXXXXX..XXXXXXX 100644
--- a/tests/qemu-iotests/testenv.py
+++ b/tests/qemu-iotests/testenv.py
@@ -XXX,XX +XXX,XX @@ class TestEnv(ContextManager['TestEnv']):
     # pylint: disable=too-many-instance-attributes
 
     env_variables = ['PYTHONPATH', 'TEST_DIR', 'SOCK_DIR', 'SAMPLE_IMG_DIR',
-                     'OUTPUT_DIR', 'PYTHON', 'QEMU_PROG', 'QEMU_IMG_PROG',
+                     'PYTHON', 'QEMU_PROG', 'QEMU_IMG_PROG',
                      'QEMU_IO_PROG', 'QEMU_NBD_PROG', 'QSD_PROG',
                      'QEMU_OPTIONS', 'QEMU_IMG_OPTIONS',
                      'QEMU_IO_OPTIONS', 'QEMU_IO_OPTIONS_NO_FMT',
@@ -XXX,XX +XXX,XX @@ def init_directories(self) -> None:
              TEST_DIR
              SOCK_DIR
              SAMPLE_IMG_DIR
-             OUTPUT_DIR
         """
 
         # Path where qemu goodies live in this source tree.
@@ -XXX,XX +XXX,XX @@ def init_directories(self) -> None:
                                         os.path.join(self.source_iotests,
                                                      'sample_images'))
 
-        self.output_dir = os.getcwd()  # OUTPUT_DIR
-
     def init_binaries(self) -> None:
         """Init binary path variables:
              PYTHON (for bash tests)
diff --git a/tests/qemu-iotests/testrunner.py b/tests/qemu-iotests/testrunner.py
index XXXXXXX..XXXXXXX 100644
--- a/tests/qemu-iotests/testrunner.py
+++ b/tests/qemu-iotests/testrunner.py
@@ -XXX,XX +XXX,XX @@ def do_run_test(self, test: str, mp: bool) -> TestResult:
         """
 
         f_test = Path(test)
-        f_bad = Path(f_test.name + '.out.bad')
-        f_notrun = Path(f_test.name + '.notrun')
-        f_casenotrun = Path(f_test.name + '.casenotrun')
         f_reference = Path(self.find_reference(test))
 
         if not f_test.exists():
@@ -XXX,XX +XXX,XX @@ def do_run_test(self, test: str, mp: bool) -> TestResult:
                               description='No qualified output '
                                           f'(expected {f_reference})')
 
-        for p in (f_bad, f_notrun, f_casenotrun):
-            silent_unlink(p)
-
         args = [str(f_test.resolve())]
         env = self.env.prepare_subprocess(args)
         if mp:
@@ -XXX,XX +XXX,XX @@ def do_run_test(self, test: str, mp: bool) -> TestResult:
                 env[d] = os.path.join(env[d], f_test.name)
                 Path(env[d]).mkdir(parents=True, exist_ok=True)
 
+        test_dir = env['TEST_DIR']
+        f_bad = Path(test_dir, f_test.name + '.out.bad')
+        f_notrun = Path(test_dir, f_test.name + '.notrun')
+        f_casenotrun = Path(test_dir, f_test.name + '.casenotrun')
+
+        for p in (f_notrun, f_casenotrun):
+            silent_unlink(p)
+
         t0 = time.time()
         with f_bad.open('w', encoding="utf-8") as f:
             with subprocess.Popen(args, cwd=str(f_test.parent), env=env,
-- 
2.34.1

From: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>

We are going to complicate bitmap initialization in the further
commit. And in future, backup job will be able to work without filter
(when source is immutable), so we'll need same bitmap initialization in
copy-before-write filter and in backup job. So, it's reasonable to do
it in block-copy.

Note that for now cbw_open() is the only caller of
block_copy_state_new().

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-2-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
---
 block/block-copy.c        | 1 +
 block/copy-before-write.c | 4 ----
 2 files changed, 1 insertion(+), 4 deletions(-)

diff --git a/block/block-copy.c b/block/block-copy.c
index XXXXXXX..XXXXXXX 100644
--- a/block/block-copy.c
+++ b/block/block-copy.c
@@ -XXX,XX +XXX,XX @@ BlockCopyState *block_copy_state_new(BdrvChild *source, BdrvChild *target,
         return NULL;
     }
     bdrv_disable_dirty_bitmap(copy_bitmap);
+    bdrv_set_dirty_bitmap(copy_bitmap, 0, bdrv_dirty_bitmap_size(copy_bitmap));
 
     /*
      * If source is in backing chain of target assume that target is going to be
diff --git a/block/copy-before-write.c b/block/copy-before-write.c
index XXXXXXX..XXXXXXX 100644
--- a/block/copy-before-write.c
+++ b/block/copy-before-write.c
@@ -XXX,XX +XXX,XX @@ static int cbw_open(BlockDriverState *bs, QDict *options, int flags,
                     Error **errp)
 {
     BDRVCopyBeforeWriteState *s = bs->opaque;
-    BdrvDirtyBitmap *copy_bitmap;
 
     bs->file = bdrv_open_child(NULL, options, "file", bs, &child_of_bds,
                                BDRV_CHILD_FILTERED | BDRV_CHILD_PRIMARY,
@@ -XXX,XX +XXX,XX @@ static int cbw_open(BlockDriverState *bs, QDict *options, int flags,
         return -EINVAL;
     }
 
-    copy_bitmap = block_copy_dirty_bitmap(s->bcs);
-    bdrv_set_dirty_bitmap(copy_bitmap, 0, bdrv_dirty_bitmap_size(copy_bitmap));
-
     return 0;
 }
 
-- 
2.34.1

From: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>

That simplifies handling failure in existing code and in further new
usage of bdrv_merge_dirty_bitmap().

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-3-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
---
 include/block/dirty-bitmap.h    | 2 +-
 block/dirty-bitmap.c            | 9 +++++++--
 block/monitor/bitmap-qmp-cmds.c | 5 +----
 3 files changed, 9 insertions(+), 7 deletions(-)

diff --git a/include/block/dirty-bitmap.h b/include/block/dirty-bitmap.h
index XXXXXXX..XXXXXXX 100644
--- a/include/block/dirty-bitmap.h
+++ b/include/block/dirty-bitmap.h
@@ -XXX,XX +XXX,XX @@ void bdrv_dirty_bitmap_set_persistence(BdrvDirtyBitmap *bitmap,
                                        bool persistent);
 void bdrv_dirty_bitmap_set_inconsistent(BdrvDirtyBitmap *bitmap);
 void bdrv_dirty_bitmap_set_busy(BdrvDirtyBitmap *bitmap, bool busy);
-void bdrv_merge_dirty_bitmap(BdrvDirtyBitmap *dest, const BdrvDirtyBitmap *src,
+bool bdrv_merge_dirty_bitmap(BdrvDirtyBitmap *dest, const BdrvDirtyBitmap *src,
                              HBitmap **backup, Error **errp);
 void bdrv_dirty_bitmap_skip_store(BdrvDirtyBitmap *bitmap, bool skip);
 bool bdrv_dirty_bitmap_get(BdrvDirtyBitmap *bitmap, int64_t offset);
diff --git a/block/dirty-bitmap.c b/block/dirty-bitmap.c
index XXXXXXX..XXXXXXX 100644
--- a/block/dirty-bitmap.c
+++ b/block/dirty-bitmap.c
@@ -XXX,XX +XXX,XX @@ bool bdrv_dirty_bitmap_next_dirty_area(BdrvDirtyBitmap *bitmap,
  * Ensures permissions on bitmaps are reasonable; use for public API.
  *
  * @backup: If provided, make a copy of dest here prior to merge.
+ *
+ * Returns true on success, false on failure. In case of failure bitmaps are
+ * untouched.
  */
-void bdrv_merge_dirty_bitmap(BdrvDirtyBitmap *dest, const BdrvDirtyBitmap *src,
+bool bdrv_merge_dirty_bitmap(BdrvDirtyBitmap *dest, const BdrvDirtyBitmap *src,
                              HBitmap **backup, Error **errp)
 {
-    bool ret;
+    bool ret = false;
 
     bdrv_dirty_bitmaps_lock(dest->bs);
     if (src->bs != dest->bs) {
@@ -XXX,XX +XXX,XX @@ out:
     if (src->bs != dest->bs) {
         bdrv_dirty_bitmaps_unlock(src->bs);
     }
+
+    return ret;
 }
 
 /**
diff --git a/block/monitor/bitmap-qmp-cmds.c b/block/monitor/bitmap-qmp-cmds.c
index XXXXXXX..XXXXXXX 100644
--- a/block/monitor/bitmap-qmp-cmds.c
+++ b/block/monitor/bitmap-qmp-cmds.c
@@ -XXX,XX +XXX,XX @@ BdrvDirtyBitmap *block_dirty_bitmap_merge(const char *node, const char *target,
     BlockDriverState *bs;
     BdrvDirtyBitmap *dst, *src, *anon;
     BlockDirtyBitmapMergeSourceList *lst;
-    Error *local_err = NULL;
 
     GLOBAL_STATE_CODE();
 
@@ -XXX,XX +XXX,XX @@ BdrvDirtyBitmap *block_dirty_bitmap_merge(const char *node, const char *target,
             abort();
         }
 
-        bdrv_merge_dirty_bitmap(anon, src, NULL, &local_err);
-        if (local_err) {
-            error_propagate(errp, local_err);
+        if (!bdrv_merge_dirty_bitmap(anon, src, NULL, errp)) {
             dst = NULL;
             goto out;
         }
-- 
2.34.1

From: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>

This will be used in the following commit to bring "incremental" mode
to copy-before-write filter.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-4-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
---
 include/block/block-copy.h |  1 +
 block/block-copy.c         | 14 +++++++++++++-
 block/copy-before-write.c  |  2 +-
 3 files changed, 15 insertions(+), 2 deletions(-)

diff --git a/include/block/block-copy.h b/include/block/block-copy.h
index XXXXXXX..XXXXXXX 100644
--- a/include/block/block-copy.h
+++ b/include/block/block-copy.h
@@ -XXX,XX +XXX,XX @@ typedef struct BlockCopyState BlockCopyState;
 typedef struct BlockCopyCallState BlockCopyCallState;
 
 BlockCopyState *block_copy_state_new(BdrvChild *source, BdrvChild *target,
+                                     const BdrvDirtyBitmap *bitmap,
                                      Error **errp);
 
 /* Function should be called prior any actual copy request */
diff --git a/block/block-copy.c b/block/block-copy.c
index XXXXXXX..XXXXXXX 100644
--- a/block/block-copy.c
+++ b/block/block-copy.c
@@ -XXX,XX +XXX,XX @@ static int64_t block_copy_calculate_cluster_size(BlockDriverState *target,
 }
 
 BlockCopyState *block_copy_state_new(BdrvChild *source, BdrvChild *target,
+                                     const BdrvDirtyBitmap *bitmap,
                                      Error **errp)
 {
+    ERRP_GUARD();
     BlockCopyState *s;
     int64_t cluster_size;
     BdrvDirtyBitmap *copy_bitmap;
@@ -XXX,XX +XXX,XX @@ BlockCopyState *block_copy_state_new(BdrvChild *source, BdrvChild *target,
         return NULL;
     }
     bdrv_disable_dirty_bitmap(copy_bitmap);
-    bdrv_set_dirty_bitmap(copy_bitmap, 0, bdrv_dirty_bitmap_size(copy_bitmap));
+    if (bitmap) {
+        if (!bdrv_merge_dirty_bitmap(copy_bitmap, bitmap, NULL, errp)) {
+            error_prepend(errp, "Failed to merge bitmap '%s' to internal "
+                          "copy-bitmap: ", bdrv_dirty_bitmap_name(bitmap));
+            bdrv_release_dirty_bitmap(copy_bitmap);
+            return NULL;
+        }
+    } else {
+        bdrv_set_dirty_bitmap(copy_bitmap, 0,
+                              bdrv_dirty_bitmap_size(copy_bitmap));
+    }
 
     /*
      * If source is in backing chain of target assume that target is going to be
diff --git a/block/copy-before-write.c b/block/copy-before-write.c
index XXXXXXX..XXXXXXX 100644
--- a/block/copy-before-write.c
+++ b/block/copy-before-write.c
@@ -XXX,XX +XXX,XX @@ static int cbw_open(BlockDriverState *bs, QDict *options, int flags,
             ((BDRV_REQ_FUA | BDRV_REQ_MAY_UNMAP | BDRV_REQ_NO_FALLBACK) &
              bs->file->bs->supported_zero_flags);
 
-    s->bcs = block_copy_state_new(bs->file, s->target, errp);
+    s->bcs = block_copy_state_new(bs->file, s->target, NULL, errp);
     if (!s->bcs) {
         error_prepend(errp, "Cannot create block-copy-state: ");
         return -EINVAL;
-- 
2.34.1

From: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>

This brings "incremental" mode to copy-before-write filter: user can
specify bitmap so that filter will copy only "dirty" areas.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20220303194349.2304213-5-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
---
 qapi/block-core.json      | 10 +++++++-
 block/copy-before-write.c | 51 ++++++++++++++++++++++++++++++++++++++-
 2 files changed, 59 insertions(+), 2 deletions(-)

diff --git a/qapi/block-core.json b/qapi/block-core.json
index XXXXXXX..XXXXXXX 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -XXX,XX +XXX,XX @@
 #
 # @target: The target for copy-before-write operations.
 #
+# @bitmap: If specified, copy-before-write filter will do
+#          copy-before-write operations only for dirty regions of the
+#          bitmap. Bitmap size must be equal to length of file and
+#          target child of the filter. Note also, that bitmap is used
+#          only to initialize internal bitmap of the process, so further
+#          modifications (or removing) of specified bitmap doesn't
+#          influence the filter. (Since 7.0)
+#
 # Since: 6.2
 ##
 { 'struct': 'BlockdevOptionsCbw',
   'base': 'BlockdevOptionsGenericFormat',
-  'data': { 'target': 'BlockdevRef' } }
+  'data': { 'target': 'BlockdevRef', '*bitmap': 'BlockDirtyBitmap' } }
 
 ##
 # @BlockdevOptions:
diff --git a/block/copy-before-write.c b/block/copy-before-write.c
index XXXXXXX..XXXXXXX 100644
--- a/block/copy-before-write.c
+++ b/block/copy-before-write.c
@@ -XXX,XX +XXX,XX @@
 
 #include "block/copy-before-write.h"
 
+#include "qapi/qapi-visit-block-core.h"
+
 typedef struct BDRVCopyBeforeWriteState {
     BlockCopyState *bcs;
     BdrvChild *target;
@@ -XXX,XX +XXX,XX @@ static void cbw_child_perm(BlockDriverState *bs, BdrvChild *c,
     }
 }
 
+static bool cbw_parse_bitmap_option(QDict *options, BdrvDirtyBitmap **bitmap,
+                                    Error **errp)
+{
+    QDict *bitmap_qdict = NULL;
+    BlockDirtyBitmap *bmp_param = NULL;
+    Visitor *v = NULL;
+    bool ret = false;
+
+    *bitmap = NULL;
+
+    qdict_extract_subqdict(options, &bitmap_qdict, "bitmap.");
+    if (!qdict_size(bitmap_qdict)) {
+        ret = true;
+        goto out;
+    }
+
+    v = qobject_input_visitor_new_flat_confused(bitmap_qdict, errp);
+    if (!v) {
+        goto out;
+    }
+
+    visit_type_BlockDirtyBitmap(v, NULL, &bmp_param, errp);
+    if (!bmp_param) {
+        goto out;
+    }
+
+    *bitmap = block_dirty_bitmap_lookup(bmp_param->node, bmp_param->name, NULL,
+                                        errp);
+    if (!*bitmap) {
+        goto out;
+    }
+
+    ret = true;
+
+out:
+    qapi_free_BlockDirtyBitmap(bmp_param);
+    visit_free(v);
+    qobject_unref(bitmap_qdict);
+
+    return ret;
+}
+
 static int cbw_open(BlockDriverState *bs, QDict *options, int flags,
                     Error **errp)
 {
     BDRVCopyBeforeWriteState *s = bs->opaque;
+    BdrvDirtyBitmap *bitmap = NULL;
 
     bs->file = bdrv_open_child(NULL, options, "file", bs, &child_of_bds,
                                BDRV_CHILD_FILTERED | BDRV_CHILD_PRIMARY,
@@ -XXX,XX +XXX,XX @@ static int cbw_open(BlockDriverState *bs, QDict *options, int flags,
         return -EINVAL;
     }
 
+    if (!cbw_parse_bitmap_option(options, &bitmap, errp)) {
+        return -EINVAL;
+    }
+
     bs->total_sectors = bs->file->bs->total_sectors;
     bs->supported_write_flags = BDRV_REQ_WRITE_UNCHANGED |
             (BDRV_REQ_FUA & bs->file->bs->supported_write_flags);
@@ -XXX,XX +XXX,XX @@ static int cbw_open(BlockDriverState *bs, QDict *options, int flags,
             ((BDRV_REQ_FUA | BDRV_REQ_MAY_UNMAP | BDRV_REQ_NO_FALLBACK) &
              bs->file->bs->supported_zero_flags);
 
-    s->bcs = block_copy_state_new(bs->file, s->target, NULL, errp);
+    s->bcs = block_copy_state_new(bs->file, s->target, bitmap, errp);
     if (!s->bcs) {
         error_prepend(errp, "Cannot create block-copy-state: ");
         return -EINVAL;
-- 
2.34.1

From: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>

Split block_copy_reset() out of block_copy_reset_unallocated() to be
used separately later.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-6-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
---
 include/block/block-copy.h |  1 +
 block/block-copy.c         | 21 +++++++++++++--------
 2 files changed, 14 insertions(+), 8 deletions(-)

diff --git a/include/block/block-copy.h b/include/block/block-copy.h
index XXXXXXX..XXXXXXX 100644
--- a/include/block/block-copy.h
+++ b/include/block/block-copy.h
@@ -XXX,XX +XXX,XX @@ void block_copy_set_progress_meter(BlockCopyState *s, ProgressMeter *pm);
 
 void block_copy_state_free(BlockCopyState *s);
 
+void block_copy_reset(BlockCopyState *s, int64_t offset, int64_t bytes);
 int64_t block_copy_reset_unallocated(BlockCopyState *s,
                                      int64_t offset, int64_t *count);
 
diff --git a/block/block-copy.c b/block/block-copy.c
index XXXXXXX..XXXXXXX 100644
--- a/block/block-copy.c
+++ b/block/block-copy.c
@@ -XXX,XX +XXX,XX @@ static int block_copy_is_cluster_allocated(BlockCopyState *s, int64_t offset,
     }
 }
 
+void block_copy_reset(BlockCopyState *s, int64_t offset, int64_t bytes)
+{
+    QEMU_LOCK_GUARD(&s->lock);
+
+    bdrv_reset_dirty_bitmap(s->copy_bitmap, offset, bytes);
+    if (s->progress) {
+        progress_set_remaining(s->progress,
+                               bdrv_get_dirty_count(s->copy_bitmap) +
+                               s->in_flight_bytes);
+    }
+}
+
 /*
  * Reset bits in copy_bitmap starting at offset if they represent unallocated
  * data in the image. May reset subsequent contiguous bits.
@@ -XXX,XX +XXX,XX @@ int64_t block_copy_reset_unallocated(BlockCopyState *s,
     bytes = clusters * s->cluster_size;
 
     if (!ret) {
-        qemu_co_mutex_lock(&s->lock);
-        bdrv_reset_dirty_bitmap(s->copy_bitmap, offset, bytes);
-        if (s->progress) {
-            progress_set_remaining(s->progress,
-                                   bdrv_get_dirty_count(s->copy_bitmap) +
-                                   s->in_flight_bytes);
-        }
-        qemu_co_mutex_unlock(&s->lock);
+        block_copy_reset(s, offset, bytes);
     }
 
     *count = bytes;
-- 
2.34.1

From: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>

Split intersecting-requests functionality out of block-copy to be
reused in copy-before-write filter.

Note: while being here, fix tiny typo in MAINTAINERS.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-7-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
---
 include/block/reqlist.h |  67 +++++++++++++++++++++++
 block/block-copy.c      | 116 +++++++++++++---------------------------
 block/reqlist.c         |  76 ++++++++++++++++++++++++++
 MAINTAINERS             |   4 +-
 block/meson.build       |   1 +
 5 files changed, 184 insertions(+), 80 deletions(-)
 create mode 100644 include/block/reqlist.h
 create mode 100644 block/reqlist.c

diff --git a/include/block/reqlist.h b/include/block/reqlist.h
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/include/block/reqlist.h
@@ -XXX,XX +XXX,XX @@
+/*
+ * reqlist API
+ *
+ * Copyright (C) 2013 Proxmox Server Solutions
+ * Copyright (c) 2021 Virtuozzo International GmbH.
+ *
+ * Authors:
+ *  Dietmar Maurer (dietmar@proxmox.com)
+ *  Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#ifndef REQLIST_H
+#define REQLIST_H
+
+#include "qemu/coroutine.h"
+
+/*
+ * The API is not thread-safe and shouldn't be. The struct is public to be part
+ * of other structures and protected by third-party locks, see
+ * block/block-copy.c for example.
+ */
+
+typedef struct BlockReq {
+    int64_t offset;
+    int64_t bytes;
+
+    CoQueue wait_queue; /* coroutines blocked on this req */
+    QLIST_ENTRY(BlockReq) list;
+} BlockReq;
+
+typedef QLIST_HEAD(, BlockReq) BlockReqList;
+
+/*
+ * Initialize new request and add it to the list. Caller must be sure that
+ * there are no conflicting requests in the list.
+ */
+void reqlist_init_req(BlockReqList *reqs, BlockReq *req, int64_t offset,
+                      int64_t bytes);
+/* Search for request in the list intersecting with @offset/@bytes area. */
+BlockReq *reqlist_find_conflict(BlockReqList *reqs, int64_t offset,
+                                int64_t bytes);
+
+/*
+ * If there are no intersecting requests return false. Otherwise, wait for the
+ * first found intersecting request to finish and return true.
+ *
+ * @lock is passed to qemu_co_queue_wait()
+ * False return value proves that lock was released at no point.
+ */
+bool coroutine_fn reqlist_wait_one(BlockReqList *reqs, int64_t offset,
+                                   int64_t bytes, CoMutex *lock);
+
+/*
+ * Shrink request and wake all waiting coroutines (maybe some of them are not
+ * intersecting with shrunk request).
+ */
+void coroutine_fn reqlist_shrink_req(BlockReq *req, int64_t new_bytes);
+
+/*
+ * Remove request and wake all waiting coroutines. Do not release any memory.
+ */
+void coroutine_fn reqlist_remove_req(BlockReq *req);
+
+#endif /* REQLIST_H */
diff --git a/block/block-copy.c b/block/block-copy.c
index XXXXXXX..XXXXXXX 100644
--- a/block/block-copy.c
+++ b/block/block-copy.c
@@ -XXX,XX +XXX,XX @@
 #include "trace.h"
 #include "qapi/error.h"
 #include "block/block-copy.h"
+#include "block/reqlist.h"
 #include "sysemu/block-backend.h"
 #include "qemu/units.h"
 #include "qemu/coroutine.h"
@@ -XXX,XX +XXX,XX @@ typedef struct BlockCopyTask {
      */
     BlockCopyState *s;
     BlockCopyCallState *call_state;
-    int64_t offset;
     /*
      * @method can also be set again in the while loop of
      * block_copy_dirty_clusters(), but it is never accessed concurrently
@@ -XXX,XX +XXX,XX @@ typedef struct BlockCopyTask {
     BlockCopyMethod method;
 
     /*
-     * Fields whose state changes throughout the execution
-     * Protected by lock in BlockCopyState.
+     * Generally, req is protected by lock in BlockCopyState, Still req.offset
+     * is only set on task creation, so may be read concurrently after creation.
+     * req.bytes is changed at most once, and need only protecting the case of
+     * parallel read while updating @bytes value in block_copy_task_shrink().
      */
-    CoQueue wait_queue; /* coroutines blocked on this task */
-    /*
-     * Only protect the case of parallel read while updating @bytes
-     * value in block_copy_task_shrink().
-     */
-    int64_t bytes;
-    QLIST_ENTRY(BlockCopyTask) list;
+    BlockReq req;
 } BlockCopyTask;
 
 static int64_t task_end(BlockCopyTask *task)
 {
-    return task->offset + task->bytes;
+    return task->req.offset + task->req.bytes;
 }
 
 typedef struct BlockCopyState {
@@ -XXX,XX +XXX,XX @@ typedef struct BlockCopyState {
     CoMutex lock;
     int64_t in_flight_bytes;
     BlockCopyMethod method;
-    QLIST_HEAD(, BlockCopyTask) tasks; /* All tasks from all block-copy calls */
+    BlockReqList reqs;
     QLIST_HEAD(, BlockCopyCallState) calls;
     /*
      * skip_unallocated:
@@ -XXX,XX +XXX,XX @@ typedef struct BlockCopyState {
     RateLimit rate_limit;
 } BlockCopyState;
 
-/* Called with lock held */
-static BlockCopyTask *find_conflicting_task(BlockCopyState *s,
-                                            int64_t offset, int64_t bytes)
-{
-    BlockCopyTask *t;
-
-    QLIST_FOREACH(t, &s->tasks, list) {
-        if (offset + bytes > t->offset && offset < t->offset + t->bytes) {
-            return t;
-        }
-    }
-
-    return NULL;
-}
-
-/*
- * If there are no intersecting tasks return false. Otherwise, wait for the
- * first found intersecting tasks to finish and return true.
- *
- * Called with lock held. May temporary release the lock.
- * Return value of 0 proves that lock was NOT released.
- */
-static bool coroutine_fn block_copy_wait_one(BlockCopyState *s, int64_t offset,
-                                             int64_t bytes)
-{
-    BlockCopyTask *task = find_conflicting_task(s, offset, bytes);
-
-    if (!task) {
-        return false;
-    }
-
-    qemu_co_queue_wait(&task->wait_queue, &s->lock);
-
-    return true;
-}
-
 /* Called with lock held */
 static int64_t block_copy_chunk_size(BlockCopyState *s)
 {
@@ -XXX,XX +XXX,XX @@ block_copy_task_create(BlockCopyState *s, BlockCopyCallState *call_state,
     bytes = QEMU_ALIGN_UP(bytes, s->cluster_size);
 
     /* region is dirty, so no existent tasks possible in it */
-    assert(!find_conflicting_task(s, offset, bytes));
+    assert(!reqlist_find_conflict(&s->reqs, offset, bytes));
 
     bdrv_reset_dirty_bitmap(s->copy_bitmap, offset, bytes);
     s->in_flight_bytes += bytes;
@@ -XXX,XX +XXX,XX @@ block_copy_task_create(BlockCopyState *s, BlockCopyCallState *call_state,
         .task.func = block_copy_task_entry,
         .s = s,
         .call_state = call_state,
-        .offset = offset,
-        .bytes = bytes,
         .method = s->method,
     };
-    qemu_co_queue_init(&task->wait_queue);
-    QLIST_INSERT_HEAD(&s->tasks, task, list);
+    reqlist_init_req(&s->reqs, &task->req, offset, bytes);
 
     return task;
 }
@@ -XXX,XX +XXX,XX @@ static void coroutine_fn block_copy_task_shrink(BlockCopyTask *task,
                                                 int64_t new_bytes)
 {
     QEMU_LOCK_GUARD(&task->s->lock);
-    if (new_bytes == task->bytes) {
+    if (new_bytes == task->req.bytes) {
         return;
     }
 
-    assert(new_bytes > 0 && new_bytes < task->bytes);
+    assert(new_bytes > 0 && new_bytes < task->req.bytes);
 
-    task->s->in_flight_bytes -= task->bytes - new_bytes;
+    task->s->in_flight_bytes -= task->req.bytes - new_bytes;
     bdrv_set_dirty_bitmap(task->s->copy_bitmap,
-                          task->offset + new_bytes, task->bytes - new_bytes);
+                          task->req.offset + new_bytes,
+                          task->req.bytes - new_bytes);
 
-    task->bytes = new_bytes;
-    qemu_co_queue_restart_all(&task->wait_queue);
+    reqlist_shrink_req(&task->req, new_bytes);
 }
 
 static void coroutine_fn block_copy_task_end(BlockCopyTask *task, int ret)
 {
     QEMU_LOCK_GUARD(&task->s->lock);
-    task->s->in_flight_bytes -= task->bytes;
+    task->s->in_flight_bytes -= task->req.bytes;
     if (ret < 0) {
-        bdrv_set_dirty_bitmap(task->s->copy_bitmap, task->offset, task->bytes);
+        bdrv_set_dirty_bitmap(task->s->copy_bitmap, task->req.offset,
+                              task->req.bytes);
     }
-    QLIST_REMOVE(task, list);
     if (task->s->progress) {
         progress_set_remaining(task->s->progress,
                                bdrv_get_dirty_count(task->s->copy_bitmap) +
                                task->s->in_flight_bytes);
     }
-    qemu_co_queue_restart_all(&task->wait_queue);
+    reqlist_remove_req(&task->req);
 }
 
 void block_copy_state_free(BlockCopyState *s)
@@ -XXX,XX +XXX,XX @@ BlockCopyState *block_copy_state_new(BdrvChild *source, BdrvChild *target,
 
     ratelimit_init(&s->rate_limit);
     qemu_co_mutex_init(&s->lock);
-    QLIST_INIT(&s->tasks);
+    QLIST_INIT(&s->reqs);
     QLIST_INIT(&s->calls);
 
     return s;
@@ -XXX,XX +XXX,XX @@ static coroutine_fn int block_copy_task_run(AioTaskPool *pool,
 
     aio_task_pool_wait_slot(pool);
     if (aio_task_pool_status(pool) < 0) {
-        co_put_to_shres(task->s->mem, task->bytes);
+        co_put_to_shres(task->s->mem, task->req.bytes);
         block_copy_task_end(task, -ECANCELED);
         g_free(task);
         return -ECANCELED;
@@ -XXX,XX +XXX,XX @@ static coroutine_fn int block_copy_task_entry(AioTask *task)
     BlockCopyMethod method = t->method;
     int ret;
 
-    ret = block_copy_do_copy(s, t->offset, t->bytes, &method, &error_is_read);
+    ret = block_copy_do_copy(s, t->req.offset, t->req.bytes, &method,
+                             &error_is_read);
 
     WITH_QEMU_LOCK_GUARD(&s->lock) {
         if (s->method == t->method) {
@@ -XXX,XX +XXX,XX @@ static coroutine_fn int block_copy_task_entry(AioTask *task)
                 t->call_state->error_is_read = error_is_read;
             }
         } else if (s->progress) {
-            progress_work_done(s->progress, t->bytes);
+            progress_work_done(s->progress, t->req.bytes);
         }
     }
-    co_put_to_shres(s->mem, t->bytes);
+    co_put_to_shres(s->mem, t->req.bytes);
     block_copy_task_end(t, ret);
 
     return ret;
@@ -XXX,XX +XXX,XX @@ block_copy_dirty_clusters(BlockCopyCallState *call_state)
             trace_block_copy_skip_range(s, offset, bytes);
             break;
         }
-        if (task->offset > offset) {
-            trace_block_copy_skip_range(s, offset, task->offset - offset);
+        if (task->req.offset > offset) {
+            trace_block_copy_skip_range(s, offset, task->req.offset - offset);
         }
 
         found_dirty = true;
 
-        ret = block_copy_block_status(s, task->offset, task->bytes,
+        ret = block_copy_block_status(s, task->req.offset, task->req.bytes,
                                       &status_bytes);
         assert(ret >= 0); /* never fail */
-        if (status_bytes < task->bytes) {
+        if (status_bytes < task->req.bytes) {
             block_copy_task_shrink(task, status_bytes);
         }
         if (qatomic_read(&s->skip_unallocated) &&
             !(ret & BDRV_BLOCK_ALLOCATED)) {
             block_copy_task_end(task, 0);
-            trace_block_copy_skip_range(s, task->offset, task->bytes);
+            trace_block_copy_skip_range(s, task->req.offset, task->req.bytes);
             offset = task_end(task);
             bytes = end - offset;
             g_free(task);
@@ -XXX,XX +XXX,XX @@ block_copy_dirty_clusters(BlockCopyCallState *call_state)
             }
         }
 
-        ratelimit_calculate_delay(&s->rate_limit, task->bytes);
+        ratelimit_calculate_delay(&s->rate_limit, task->req.bytes);
 
-        trace_block_copy_process(s, task->offset);
+        trace_block_copy_process(s, task->req.offset);
 
-        co_get_from_shres(s->mem, task->bytes);
+        co_get_from_shres(s->mem, task->req.bytes);
 
         offset = task_end(task);
         bytes = end - offset;
@@ -XXX,XX +XXX,XX @@ static int coroutine_fn block_copy_common(BlockCopyCallState *call_state)
                  * Check that there is no task we still need to
                  * wait to complete
                  */
-                ret = block_copy_wait_one(s, call_state->offset,
-                                          call_state->bytes);
+                ret = reqlist_wait_one(&s->reqs, call_state->offset,
+                                       call_state->bytes, &s->lock);
                 if (ret == 0) {
                     /*
                      * No pending tasks, but check again the bitmap in this
@@ -XXX,XX +XXX,XX @@ static int coroutine_fn block_copy_common(BlockCopyCallState *call_state)
                      * between this and the critical section in
                      * block_copy_dirty_clusters().
                      *
-                     * block_copy_wait_one return value 0 also means that it
+                     * reqlist_wait_one return value 0 also means that it
                      * didn't release the lock. So, we are still in the same
                      * critical section, not interrupted by any concurrent
                      * access to state.
diff --git a/block/reqlist.c b/block/reqlist.c
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/block/reqlist.c
@@ -XXX,XX +XXX,XX @@
+/*
+ * reqlist API
+ *
+ * Copyright (C) 2013 Proxmox Server Solutions
+ * Copyright (c) 2021 Virtuozzo International GmbH.
+ *
+ * Authors:
+ *  Dietmar Maurer (dietmar@proxmox.com)
+ *  Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+
+#include "block/reqlist.h"
+
+void reqlist_init_req(BlockReqList *reqs, BlockReq *req, int64_t offset,
+                      int64_t bytes)
+{
+    assert(!reqlist_find_conflict(reqs, offset, bytes));
+
+    *req = (BlockReq) {
+        .offset = offset,
+        .bytes = bytes,
+    };
+    qemu_co_queue_init(&req->wait_queue);
+    QLIST_INSERT_HEAD(reqs, req, list);
+}
+
+BlockReq *reqlist_find_conflict(BlockReqList *reqs, int64_t offset,
+                                int64_t bytes)
+{
+    BlockReq *r;
+
+    QLIST_FOREACH(r, reqs, list) {
+        if (offset + bytes > r->offset && offset < r->offset + r->bytes) {
+            return r;
+        }
+    }
+
+    return NULL;
+}
+
+bool coroutine_fn reqlist_wait_one(BlockReqList *reqs, int64_t offset,
+                                   int64_t bytes, CoMutex *lock)
+{
+    BlockReq *r = reqlist_find_conflict(reqs, offset, bytes);
+
+    if (!r) {
+        return false;
+    }
+
+    qemu_co_queue_wait(&r->wait_queue, lock);
+
+    return true;
+}
+
+void coroutine_fn reqlist_shrink_req(BlockReq *req, int64_t new_bytes)
+{
+    if (new_bytes == req->bytes) {
+        return;
+    }
+
+    assert(new_bytes > 0 && new_bytes < req->bytes);
+
+    req->bytes = new_bytes;
+    qemu_co_queue_restart_all(&req->wait_queue);
+}
+
+void coroutine_fn reqlist_remove_req(BlockReq *req)
+{
+    QLIST_REMOVE(req, list);
+    qemu_co_queue_restart_all(&req->wait_queue);
+}
diff --git a/MAINTAINERS b/MAINTAINERS
index XXXXXXX..XXXXXXX 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -XXX,XX +XXX,XX @@ F: block/stream.c
 F: block/mirror.c
 F: qapi/job.json
 F: block/block-copy.c
-F: include/block/block-copy.c
+F: include/block/block-copy.h
+F: block/reqlist.c
+F: include/block/reqlist.h
 F: block/copy-before-write.h
 F: block/copy-before-write.c
 F: include/block/aio_task.h
diff --git a/block/meson.build b/block/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/block/meson.build
+++ b/block/meson.build
@@ -XXX,XX +XXX,XX @@ block_ss.add(files(
   'qcow2.c',
   'quorum.c',
   'raw-format.c',
+  'reqlist.c',
   'snapshot.c',
   'throttle-groups.c',
   'throttle.c',
-- 
2.34.1

From: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>

Add a convenient function similar with bdrv_block_status() to get
status of dirty bitmap.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-9-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
---
 include/block/dirty-bitmap.h |  2 ++
 include/qemu/hbitmap.h       | 12 ++++++++++++
 block/dirty-bitmap.c         |  6 ++++++
 util/hbitmap.c               | 33 +++++++++++++++++++++++++++++++++
 4 files changed, 53 insertions(+)

diff --git a/include/block/dirty-bitmap.h b/include/block/dirty-bitmap.h
index XXXXXXX..XXXXXXX 100644
--- a/include/block/dirty-bitmap.h
+++ b/include/block/dirty-bitmap.h
@@ -XXX,XX +XXX,XX @@ int64_t bdrv_dirty_bitmap_next_zero(BdrvDirtyBitmap *bitmap, int64_t offset,
 bool bdrv_dirty_bitmap_next_dirty_area(BdrvDirtyBitmap *bitmap,
         int64_t start, int64_t end, int64_t max_dirty_count,
         int64_t *dirty_start, int64_t *dirty_count);
+bool bdrv_dirty_bitmap_status(BdrvDirtyBitmap *bitmap, int64_t offset,
+                              int64_t bytes, int64_t *count);
 BdrvDirtyBitmap *bdrv_reclaim_dirty_bitmap_locked(BdrvDirtyBitmap *bitmap,
                                                   Error **errp);
 
diff --git a/include/qemu/hbitmap.h b/include/qemu/hbitmap.h
index XXXXXXX..XXXXXXX 100644
--- a/include/qemu/hbitmap.h
+++ b/include/qemu/hbitmap.h
@@ -XXX,XX +XXX,XX @@ bool hbitmap_next_dirty_area(const HBitmap *hb, int64_t start, int64_t end,
                              int64_t max_dirty_count,
                              int64_t *dirty_start, int64_t *dirty_count);
 
+/*
+ * bdrv_dirty_bitmap_status:
+ * @hb: The HBitmap to operate on
+ * @start: The bit to start from
+ * @count: Number of bits to proceed
+ * @pnum: Out-parameter. How many bits has same value starting from @start
+ *
+ * Returns true if bitmap is dirty at @start, false otherwise.
+ */
+bool hbitmap_status(const HBitmap *hb, int64_t start, int64_t count,
+                    int64_t *pnum);
+
 /**
  * hbitmap_iter_next:
  * @hbi: HBitmapIter to operate on.
diff --git a/block/dirty-bitmap.c b/block/dirty-bitmap.c
index XXXXXXX..XXXXXXX 100644
--- a/block/dirty-bitmap.c
+++ b/block/dirty-bitmap.c
@@ -XXX,XX +XXX,XX @@ bool bdrv_dirty_bitmap_next_dirty_area(BdrvDirtyBitmap *bitmap,
                                    dirty_start, dirty_count);
 }
 
+bool bdrv_dirty_bitmap_status(BdrvDirtyBitmap *bitmap, int64_t offset,
+                              int64_t bytes, int64_t *count)
+{
+    return hbitmap_status(bitmap->bitmap, offset, bytes, count);
+}
+
 /**
  * bdrv_merge_dirty_bitmap: merge src into dest.
  * Ensures permissions on bitmaps are reasonable; use for public API.
diff --git a/util/hbitmap.c b/util/hbitmap.c
index XXXXXXX..XXXXXXX 100644
--- a/util/hbitmap.c
+++ b/util/hbitmap.c
@@ -XXX,XX +XXX,XX @@ bool hbitmap_next_dirty_area(const HBitmap *hb, int64_t start, int64_t end,
     return true;
 }
 
+bool hbitmap_status(const HBitmap *hb, int64_t start, int64_t count,
+                    int64_t *pnum)
+{
+    int64_t next_dirty, next_zero;
+
+    assert(start >= 0);
+    assert(count > 0);
+    assert(start + count <= hb->orig_size);
+
+    next_dirty = hbitmap_next_dirty(hb, start, count);
+    if (next_dirty == -1) {
+        *pnum = count;
+        return false;
+    }
+
+    if (next_dirty > start) {
+        *pnum = next_dirty - start;
+        return false;
+    }
+
+    assert(next_dirty == start);
+
+    next_zero = hbitmap_next_zero(hb, start, count);
+    if (next_zero == -1) {
+        *pnum = count;
+        return true;
+    }
+
+    assert(next_zero > start);
+    *pnum = next_zero - start;
+    return false;
+}
+
 bool hbitmap_empty(const HBitmap *hb)
 {
     return hb->count == 0;
-- 
2.34.1

From: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>

Add function to wait for all intersecting requests.
To be used in the further commit.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Nikita Lapshin <nikita.lapshin@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-10-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
---
 include/block/reqlist.h | 8 ++++++++
 block/reqlist.c         | 8 ++++++++
 2 files changed, 16 insertions(+)

diff --git a/include/block/reqlist.h b/include/block/reqlist.h
index XXXXXXX..XXXXXXX 100644
--- a/include/block/reqlist.h
+++ b/include/block/reqlist.h
@@ -XXX,XX +XXX,XX @@ BlockReq *reqlist_find_conflict(BlockReqList *reqs, int64_t offset,
 bool coroutine_fn reqlist_wait_one(BlockReqList *reqs, int64_t offset,
                                    int64_t bytes, CoMutex *lock);
 
+/*
+ * Wait for all intersecting requests. It just calls reqlist_wait_one() in a
+ * loop, caller is responsible to stop producing new requests in this region
+ * in parallel, otherwise reqlist_wait_all() may never return.
+ */
+void coroutine_fn reqlist_wait_all(BlockReqList *reqs, int64_t offset,
+                                   int64_t bytes, CoMutex *lock);
+
 /*
  * Shrink request and wake all waiting coroutines (maybe some of them are not
  * intersecting with shrunk request).
diff --git a/block/reqlist.c b/block/reqlist.c
index XXXXXXX..XXXXXXX 100644
--- a/block/reqlist.c
+++ b/block/reqlist.c
@@ -XXX,XX +XXX,XX @@ bool coroutine_fn reqlist_wait_one(BlockReqList *reqs, int64_t offset,
     return true;
 }
 
+void coroutine_fn reqlist_wait_all(BlockReqList *reqs, int64_t offset,
+                                   int64_t bytes, CoMutex *lock)
+{
+    while (reqlist_wait_one(reqs, offset, bytes, lock)) {
+        /* continue */
+    }
+}
+
 void coroutine_fn reqlist_shrink_req(BlockReq *req, int64_t new_bytes)
 {
     if (new_bytes == req->bytes) {
-- 
2.34.1

From: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>

Add new block driver handlers and corresponding generic wrappers.
It will be used to allow copy-before-write filter to provide
reach fleecing interface in further commit.

In future this approach may be used to allow reading qcow2 internal
snapshots, for example to export them through NBD.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-11-vsementsov@virtuozzo.com>
[hreitz: Rebased on block GS/IO split]
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
---
 include/block/block_int-common.h | 18 ++++++++
 include/block/block_int-io.h     |  9 ++++
 block/io.c                       | 72 ++++++++++++++++++++++++++++++++
 3 files changed, 99 insertions(+)

diff --git a/include/block/block_int-common.h b/include/block/block_int-common.h
index XXXXXXX..XXXXXXX 100644
--- a/include/block/block_int-common.h
+++ b/include/block/block_int-common.h
@@ -XXX,XX +XXX,XX @@ struct BlockDriver {
         bool want_zero, int64_t offset, int64_t bytes, int64_t *pnum,
         int64_t *map, BlockDriverState **file);
 
+    /*
+     * Snapshot-access API.
+     *
+     * Block-driver may provide snapshot-access API: special functions to access
+     * some internal "snapshot". The functions are similar with normal
+     * read/block_status/discard handler, but don't have any specific handling
+     * in generic block-layer: no serializing, no alignment, no tracked
+     * requests. So, block-driver that realizes these APIs is fully responsible
+     * for synchronization between snapshot-access API and normal IO requests.
+     */
+    int coroutine_fn (*bdrv_co_preadv_snapshot)(BlockDriverState *bs,
+        int64_t offset, int64_t bytes, QEMUIOVector *qiov, size_t qiov_offset);
+    int coroutine_fn (*bdrv_co_snapshot_block_status)(BlockDriverState *bs,
+        bool want_zero, int64_t offset, int64_t bytes, int64_t *pnum,
+        int64_t *map, BlockDriverState **file);
+    int coroutine_fn (*bdrv_co_pdiscard_snapshot)(BlockDriverState *bs,
+        int64_t offset, int64_t bytes);
+
     /*
      * Invalidate any cached meta-data.
      */
diff --git a/include/block/block_int-io.h b/include/block/block_int-io.h
index XXXXXXX..XXXXXXX 100644
--- a/include/block/block_int-io.h
+++ b/include/block/block_int-io.h
@@ -XXX,XX +XXX,XX @@
  * the I/O API.
  */
 
+int coroutine_fn bdrv_co_preadv_snapshot(BdrvChild *child,
+    int64_t offset, int64_t bytes, QEMUIOVector *qiov, size_t qiov_offset);
+int coroutine_fn bdrv_co_snapshot_block_status(BlockDriverState *bs,
+    bool want_zero, int64_t offset, int64_t bytes, int64_t *pnum,
+    int64_t *map, BlockDriverState **file);
+int coroutine_fn bdrv_co_pdiscard_snapshot(BlockDriverState *bs,
+    int64_t offset, int64_t bytes);
+
+
 int coroutine_fn bdrv_co_preadv(BdrvChild *child,
     int64_t offset, int64_t bytes, QEMUIOVector *qiov,
     BdrvRequestFlags flags);
diff --git a/block/io.c b/block/io.c
index XXXXXXX..XXXXXXX 100644
--- a/block/io.c
+++ b/block/io.c
@@ -XXX,XX +XXX,XX @@ void bdrv_cancel_in_flight(BlockDriverState *bs)
         bs->drv->bdrv_cancel_in_flight(bs);
     }
 }
+
+int coroutine_fn
+bdrv_co_preadv_snapshot(BdrvChild *child, int64_t offset, int64_t bytes,
+                        QEMUIOVector *qiov, size_t qiov_offset)
+{
+    BlockDriverState *bs = child->bs;
+    BlockDriver *drv = bs->drv;
+    int ret;
+    IO_CODE();
+
+    if (!drv) {
+        return -ENOMEDIUM;
+    }
+
+    if (!drv->bdrv_co_preadv_snapshot) {
+        return -ENOTSUP;
+    }
+
+    bdrv_inc_in_flight(bs);
+    ret = drv->bdrv_co_preadv_snapshot(bs, offset, bytes, qiov, qiov_offset);
+    bdrv_dec_in_flight(bs);
+
+    return ret;
+}
+
+int coroutine_fn
+bdrv_co_snapshot_block_status(BlockDriverState *bs,
+                              bool want_zero, int64_t offset, int64_t bytes,
+                              int64_t *pnum, int64_t *map,
+                              BlockDriverState **file)
+{
+    BlockDriver *drv = bs->drv;
+    int ret;
+    IO_CODE();
+
+    if (!drv) {
+        return -ENOMEDIUM;
+    }
+
+    if (!drv->bdrv_co_snapshot_block_status) {
+        return -ENOTSUP;
+    }
+
+    bdrv_inc_in_flight(bs);
+    ret = drv->bdrv_co_snapshot_block_status(bs, want_zero, offset, bytes,
+                                             pnum, map, file);
+    bdrv_dec_in_flight(bs);
+
+    return ret;
+}
+
+int coroutine_fn
+bdrv_co_pdiscard_snapshot(BlockDriverState *bs, int64_t offset, int64_t bytes)
+{
+    BlockDriver *drv = bs->drv;
+    int ret;
+    IO_CODE();
+
+    if (!drv) {
+        return -ENOMEDIUM;
+    }
+
+    if (!drv->bdrv_co_pdiscard_snapshot) {
+        return -ENOTSUP;
+    }
+
+    bdrv_inc_in_flight(bs);
+    ret = drv->bdrv_co_pdiscard_snapshot(bs, offset, bytes);
+    bdrv_dec_in_flight(bs);
+
+    return ret;
+}
-- 
2.34.1

From: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>

The new block driver simply utilizes snapshot-access API of underlying
block node.

In further patches we want to use it like this:

This way, NBD client will be able to read snapshotted state of active
disk, when active disk is continued to be written by guest. This is
known as "fleecing", and currently uses another scheme based on qcow2
temporary image which backing file is active-disk. New scheme comes
with benefits - see next commit.

The other possible application is exporting internal snapshots of
qcow2, like this:

[guest]          [NBD export]
   |                  |
   | root             | root
   v       file       v
[qcow2]<---------[snapshot-access]

For this, we'll need to implement snapshot-access API handlers in
qcow2 driver, and improve snapshot-access block driver (and API) to
make it possible to select snapshot by name. Another thing to improve
is size of snapshot. Now for simplicity we just use size of bs->file,
which is OK for backup, but for qcow2 snapshots export we'll need to
imporve snapshot-access API to get size of snapshot.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20220303194349.2304213-12-vsementsov@virtuozzo.com>
[hreitz: Rebased on block GS/IO split]
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
---
 qapi/block-core.json             |   4 +-
 include/block/block_int-common.h |   6 ++
 block/snapshot-access.c          | 132 +++++++++++++++++++++++++++++++
 MAINTAINERS                      |   1 +
 block/meson.build                |   1 +
 5 files changed, 143 insertions(+), 1 deletion(-)
 create mode 100644 block/snapshot-access.c

diff --git a/qapi/block-core.json b/qapi/block-core.json
index XXXXXXX..XXXXXXX 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -XXX,XX +XXX,XX @@
 # @blkreplay: Since 4.2
 # @compress: Since 5.0
 # @copy-before-write: Since 6.2
+# @snapshot-access: Since 7.0
 #
 # Since: 2.9
 ##
 { 'enum': 'BlockdevDriver',
   'data': [ 'blkdebug', 'blklogwrites', 'blkreplay', 'blkverify', 'bochs',
             'cloop', 'compress', 'copy-before-write', 'copy-on-read', 'dmg',
-            'file', 'ftp', 'ftps', 'gluster',
+            'file', 'snapshot-access', 'ftp', 'ftps', 'gluster',
             {'name': 'host_cdrom', 'if': 'HAVE_HOST_BLOCK_DEVICE' },
             {'name': 'host_device', 'if': 'HAVE_HOST_BLOCK_DEVICE' },
             'http', 'https', 'iscsi',
@@ -XXX,XX +XXX,XX @@
       'rbd':        'BlockdevOptionsRbd',
       'replication': { 'type': 'BlockdevOptionsReplication',
                        'if': 'CONFIG_REPLICATION' },
+      'snapshot-access': 'BlockdevOptionsGenericFormat',
       'ssh':        'BlockdevOptionsSsh',
       'throttle':   'BlockdevOptionsThrottle',
       'vdi':        'BlockdevOptionsGenericFormat',
diff --git a/include/block/block_int-common.h b/include/block/block_int-common.h
index XXXXXXX..XXXXXXX 100644
--- a/include/block/block_int-common.h
+++ b/include/block/block_int-common.h
@@ -XXX,XX +XXX,XX @@ struct BlockDriver {
      * in generic block-layer: no serializing, no alignment, no tracked
      * requests. So, block-driver that realizes these APIs is fully responsible
      * for synchronization between snapshot-access API and normal IO requests.
+     *
+     * TODO: To be able to support qcow2's internal snapshots, this API will
+     * need to be extended to:
+     * - be able to select a specific snapshot
+     * - receive the snapshot's actual length (which may differ from bs's
+     *   length)
      */
     int coroutine_fn (*bdrv_co_preadv_snapshot)(BlockDriverState *bs,
         int64_t offset, int64_t bytes, QEMUIOVector *qiov, size_t qiov_offset);
diff --git a/block/snapshot-access.c b/block/snapshot-access.c
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/block/snapshot-access.c
@@ -XXX,XX +XXX,XX @@
+/*
+ * snapshot_access block driver
+ *
+ * Copyright (c) 2022 Virtuozzo International GmbH.
+ *
+ * Author:
+ *  Sementsov-Ogievskiy Vladimir <vsementsov@virtuozzo.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "qemu/osdep.h"
+
+#include "sysemu/block-backend.h"
+#include "qemu/cutils.h"
+#include "block/block_int.h"
+
+static coroutine_fn int
+snapshot_access_co_preadv_part(BlockDriverState *bs,
+                               int64_t offset, int64_t bytes,
+                               QEMUIOVector *qiov, size_t qiov_offset,
+                               BdrvRequestFlags flags)
+{
+    if (flags) {
+        return -ENOTSUP;
+    }
+
+    return bdrv_co_preadv_snapshot(bs->file, offset, bytes, qiov, qiov_offset);
+}
+
+static int coroutine_fn
+snapshot_access_co_block_status(BlockDriverState *bs,
+                                bool want_zero, int64_t offset,
+                                int64_t bytes, int64_t *pnum,
+                                int64_t *map, BlockDriverState **file)
+{
+    return bdrv_co_snapshot_block_status(bs->file->bs, want_zero, offset,
+                                         bytes, pnum, map, file);
+}
+
+static int coroutine_fn snapshot_access_co_pdiscard(BlockDriverState *bs,
+                                             int64_t offset, int64_t bytes)
+{
+    return bdrv_co_pdiscard_snapshot(bs->file->bs, offset, bytes);
+}
+
+static int coroutine_fn
+snapshot_access_co_pwrite_zeroes(BlockDriverState *bs,
+                                 int64_t offset, int64_t bytes,
+                                 BdrvRequestFlags flags)
+{
+    return -ENOTSUP;
+}
+
+static coroutine_fn int
+snapshot_access_co_pwritev_part(BlockDriverState *bs,
+                                int64_t offset, int64_t bytes,
+                                QEMUIOVector *qiov, size_t qiov_offset,
+                                BdrvRequestFlags flags)
+{
+    return -ENOTSUP;
+}
+
+
+static void snapshot_access_refresh_filename(BlockDriverState *bs)
+{
+    pstrcpy(bs->exact_filename, sizeof(bs->exact_filename),
+            bs->file->bs->filename);
+}
+
+static int snapshot_access_open(BlockDriverState *bs, QDict *options, int flags,
+                                Error **errp)
+{
+    bs->file = bdrv_open_child(NULL, options, "file", bs, &child_of_bds,
+                               BDRV_CHILD_DATA | BDRV_CHILD_PRIMARY,
+                               false, errp);
+    if (!bs->file) {
+        return -EINVAL;
+    }
+
+    bs->total_sectors = bs->file->bs->total_sectors;
+
+    return 0;
+}
+
+static void snapshot_access_child_perm(BlockDriverState *bs, BdrvChild *c,
+                                BdrvChildRole role,
+                                BlockReopenQueue *reopen_queue,
+                                uint64_t perm, uint64_t shared,
+                                uint64_t *nperm, uint64_t *nshared)
+{
+    /*
+     * Currently, we don't need any permissions. If bs->file provides
+     * snapshot-access API, we can use it.
+     */
+    *nperm = 0;
+    *nshared = BLK_PERM_ALL;
+}
+
+BlockDriver bdrv_snapshot_access_drv = {
+    .format_name = "snapshot-access",
+
+    .bdrv_open                  = snapshot_access_open,
+
+    .bdrv_co_preadv_part        = snapshot_access_co_preadv_part,
+    .bdrv_co_pwritev_part       = snapshot_access_co_pwritev_part,
+    .bdrv_co_pwrite_zeroes      = snapshot_access_co_pwrite_zeroes,
+    .bdrv_co_pdiscard           = snapshot_access_co_pdiscard,
+    .bdrv_co_block_status       = snapshot_access_co_block_status,
+
+    .bdrv_refresh_filename      = snapshot_access_refresh_filename,
+
+    .bdrv_child_perm            = snapshot_access_child_perm,
+};
+
+static void snapshot_access_init(void)
+{
+    bdrv_register(&bdrv_snapshot_access_drv);
+}
+
+block_init(snapshot_access_init);
diff --git a/MAINTAINERS b/MAINTAINERS
index XXXXXXX..XXXXXXX 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -XXX,XX +XXX,XX @@ F: block/reqlist.c
 F: include/block/reqlist.h
 F: block/copy-before-write.h
 F: block/copy-before-write.c
+F: block/snapshot-access.c
 F: include/block/aio_task.h
 F: block/aio_task.c
 F: util/qemu-co-shared-resource.c
diff --git a/block/meson.build b/block/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/block/meson.build
+++ b/block/meson.build
@@ -XXX,XX +XXX,XX @@ block_ss.add(files(
   'raw-format.c',
   'reqlist.c',
   'snapshot.c',
+  'snapshot-access.c',
   'throttle-groups.c',
   'throttle.c',
   'vhdx-endian.c',
-- 
2.34.1

From: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>

Current scheme of image fleecing looks like this:

- On guest writes copy-before-write filter copies old data from active
   disk to temp.qcow2. So fleecing client (NBD export) when reads
   changed regions from temp.qcow2 image and unchanged from active disk
   through backing link.

This patch makes possible new image fleecing scheme:

- copy-before-write does CBW operations and also provides
   snapshot-access API. The API may be accessed through
   snapshot-access driver.

Benefits of new scheme:

1. Access control: if remote client try to read data that not covered
   by original dirty bitmap used on copy-before-write open, client gets
   -EACCES.

2. Discard support: if remote client do DISCARD, this additionally to
   discarding data in temp.img informs block-copy process to not copy
   these clusters. Next read from discarded area will return -EACCES.
   This is significant thing: when fleecing user reads data that was
   not yet copied to temp.img, we can avoid copying it on further guest
   write.

3. Synchronisation between client reads and block-copy write is more
   efficient. In old scheme we just rely on BDRV_REQ_SERIALISING flag
   used for writes to temp.qcow2. New scheme is less blocking:
     - fleecing reads are never blocked: if data region is untouched or
       in-flight, we just read from active-disk, otherwise we read from
       temp.img
     - writes to temp.img are not blocked by fleecing reads
     - still, guest writes of-course are blocked by in-flight fleecing
       reads, that currently read from active-disk - it's the minimum
       necessary blocking

4. Temporary image may be of any format, as we don't rely on backing
   feature.

5. Permission relation are simplified. With old scheme we have to share
   write permission on target child of copy-before-write, otherwise
   backing link conflicts with copy-before-write file child write
   permissions. With new scheme we don't have backing link, and
   copy-before-write node may have unshared access to temporary node.
   (Not realized in this commit, will be in future).

6. Having control on fleecing reads we'll be able to implement
   alternative behavior on failed copy-before-write operations.
   Currently we just break guest request (that's a historical behavior
   of backup). But in some scenarios it's a bad behavior: better
   is to drop the backup as failed but don't break guest request.
   With new scheme we can simply unset some bits in a bitmap on CBW
   failure and further fleecing reads will -EACCES, or something like
   this. (Not implemented in this commit, will be in future)
   Additional application for this is implementing timeout for CBW
   operations.

Iotest 257 output is updated, as two more bitmaps now live in
copy-before-write filter.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20220303194349.2304213-13-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
---
 block/copy-before-write.c  | 212 ++++++++++++++++++++++++++++++++++-
 tests/qemu-iotests/257.out | 224 +++++++++++++++++++++++++++++++++++++
 2 files changed, 435 insertions(+), 1 deletion(-)

diff --git a/block/copy-before-write.c b/block/copy-before-write.c
index XXXXXXX..XXXXXXX 100644
--- a/block/copy-before-write.c
+++ b/block/copy-before-write.c
@@ -XXX,XX +XXX,XX @@
 #include "block/block-copy.h"
 
 #include "block/copy-before-write.h"
+#include "block/reqlist.h"
 
 #include "qapi/qapi-visit-block-core.h"
 
 typedef struct BDRVCopyBeforeWriteState {
     BlockCopyState *bcs;
     BdrvChild *target;
+
+    /*
+     * @lock: protects access to @access_bitmap, @done_bitmap and
+     * @frozen_read_reqs
+     */
+    CoMutex lock;
+
+    /*
+     * @access_bitmap: represents areas allowed for reading by fleecing user.
+     * Reading from non-dirty areas leads to -EACCES.
+     */
+    BdrvDirtyBitmap *access_bitmap;
+
+    /*
+     * @done_bitmap: represents areas that was successfully copied to @target by
+     * copy-before-write operations.
+     */
+    BdrvDirtyBitmap *done_bitmap;
+
+    /*
+     * @frozen_read_reqs: current read requests for fleecing user in bs->file
+     * node. These areas must not be rewritten by guest.
+     */
+    BlockReqList frozen_read_reqs;
 } BDRVCopyBeforeWriteState;
 
 static coroutine_fn int cbw_co_preadv(
@@ -XXX,XX +XXX,XX @@ static coroutine_fn int cbw_co_preadv(
     return bdrv_co_preadv(bs->file, offset, bytes, qiov, flags);
 }
 
+/*
+ * Do copy-before-write operation.
+ *
+ * On failure guest request must be failed too.
+ *
+ * On success, we also wait for all in-flight fleecing read requests in source
+ * node, and it's guaranteed that after cbw_do_copy_before_write() successful
+ * return there are no such requests and they will never appear.
+ */
 static coroutine_fn int cbw_do_copy_before_write(BlockDriverState *bs,
         uint64_t offset, uint64_t bytes, BdrvRequestFlags flags)
 {
     BDRVCopyBeforeWriteState *s = bs->opaque;
+    int ret;
     uint64_t off, end;
     int64_t cluster_size = block_copy_cluster_size(s->bcs);
 
@@ -XXX,XX +XXX,XX @@ static coroutine_fn int cbw_do_copy_before_write(BlockDriverState *bs,
     off = QEMU_ALIGN_DOWN(offset, cluster_size);
     end = QEMU_ALIGN_UP(offset + bytes, cluster_size);
 
-    return block_copy(s->bcs, off, end - off, true);
+    ret = block_copy(s->bcs, off, end - off, true);
+    if (ret < 0) {
+        return ret;
+    }
+
+    WITH_QEMU_LOCK_GUARD(&s->lock) {
+        bdrv_set_dirty_bitmap(s->done_bitmap, off, end - off);
+        reqlist_wait_all(&s->frozen_read_reqs, off, end - off, &s->lock);
+    }
+
+    return 0;
 }
 
 static int coroutine_fn cbw_co_pdiscard(BlockDriverState *bs,
@@ -XXX,XX +XXX,XX @@ static int coroutine_fn cbw_co_flush(BlockDriverState *bs)
     return bdrv_co_flush(bs->file->bs);
 }
 
+/*
+ * If @offset not accessible - return NULL.
+ *
+ * Otherwise, set @pnum to some bytes that accessible from @file (@file is set
+ * to bs->file or to s->target). Return newly allocated BlockReq object that
+ * should be than passed to cbw_snapshot_read_unlock().
+ *
+ * It's guaranteed that guest writes will not interact in the region until
+ * cbw_snapshot_read_unlock() called.
+ */
+static BlockReq *cbw_snapshot_read_lock(BlockDriverState *bs,
+                                        int64_t offset, int64_t bytes,
+                                        int64_t *pnum, BdrvChild **file)
+{
+    BDRVCopyBeforeWriteState *s = bs->opaque;
+    BlockReq *req = g_new(BlockReq, 1);
+    bool done;
+
+    QEMU_LOCK_GUARD(&s->lock);
+
+    if (bdrv_dirty_bitmap_next_zero(s->access_bitmap, offset, bytes) != -1) {
+        g_free(req);
+        return NULL;
+    }
+
+    done = bdrv_dirty_bitmap_status(s->done_bitmap, offset, bytes, pnum);
+    if (done) {
+        /*
+         * Special invalid BlockReq, that is handled in
+         * cbw_snapshot_read_unlock(). We don't need to lock something to read
+         * from s->target.
+         */
+        *req = (BlockReq) {.offset = -1, .bytes = -1};
+        *file = s->target;
+    } else {
+        reqlist_init_req(&s->frozen_read_reqs, req, offset, bytes);
+        *file = bs->file;
+    }
+
+    return req;
+}
+
+static void cbw_snapshot_read_unlock(BlockDriverState *bs, BlockReq *req)
+{
+    BDRVCopyBeforeWriteState *s = bs->opaque;
+
+    if (req->offset == -1 && req->bytes == -1) {
+        g_free(req);
+        return;
+    }
+
+    QEMU_LOCK_GUARD(&s->lock);
+
+    reqlist_remove_req(req);
+    g_free(req);
+}
+
+static coroutine_fn int
+cbw_co_preadv_snapshot(BlockDriverState *bs, int64_t offset, int64_t bytes,
+                       QEMUIOVector *qiov, size_t qiov_offset)
+{
+    BlockReq *req;
+    BdrvChild *file;
+    int ret;
+
+    /* TODO: upgrade to async loop using AioTask */
+    while (bytes) {
+        int64_t cur_bytes;
+
+        req = cbw_snapshot_read_lock(bs, offset, bytes, &cur_bytes, &file);
+        if (!req) {
+            return -EACCES;
+        }
+
+        ret = bdrv_co_preadv_part(file, offset, cur_bytes,
+                                  qiov, qiov_offset, 0);
+        cbw_snapshot_read_unlock(bs, req);
+        if (ret < 0) {
+            return ret;
+        }
+
+        bytes -= cur_bytes;
+        offset += cur_bytes;
+        qiov_offset += cur_bytes;
+    }
+
+    return 0;
+}
+
+static int coroutine_fn
+cbw_co_snapshot_block_status(BlockDriverState *bs,
+                             bool want_zero, int64_t offset, int64_t bytes,
+                             int64_t *pnum, int64_t *map,
+                             BlockDriverState **file)
+{
+    BDRVCopyBeforeWriteState *s = bs->opaque;
+    BlockReq *req;
+    int ret;
+    int64_t cur_bytes;
+    BdrvChild *child;
+
+    req = cbw_snapshot_read_lock(bs, offset, bytes, &cur_bytes, &child);
+    if (!req) {
+        return -EACCES;
+    }
+
+    ret = bdrv_block_status(child->bs, offset, cur_bytes, pnum, map, file);
+    if (child == s->target) {
+        /*
+         * We refer to s->target only for areas that we've written to it.
+         * And we can not report unallocated blocks in s->target: this will
+         * break generic block-status-above logic, that will go to
+         * copy-before-write filtered child in this case.
+         */
+        assert(ret & BDRV_BLOCK_ALLOCATED);
+    }
+
+    cbw_snapshot_read_unlock(bs, req);
+
+    return ret;
+}
+
+static int coroutine_fn cbw_co_pdiscard_snapshot(BlockDriverState *bs,
+                                                 int64_t offset, int64_t bytes)
+{
+    BDRVCopyBeforeWriteState *s = bs->opaque;
+
+    WITH_QEMU_LOCK_GUARD(&s->lock) {
+        bdrv_reset_dirty_bitmap(s->access_bitmap, offset, bytes);
+    }
+
+    block_copy_reset(s->bcs, offset, bytes);
+
+    return bdrv_co_pdiscard(s->target, offset, bytes);
+}
+
 static void cbw_refresh_filename(BlockDriverState *bs)
 {
     pstrcpy(bs->exact_filename, sizeof(bs->exact_filename),
@@ -XXX,XX +XXX,XX @@ static int cbw_open(BlockDriverState *bs, QDict *options, int flags,
 {
     BDRVCopyBeforeWriteState *s = bs->opaque;
     BdrvDirtyBitmap *bitmap = NULL;
+    int64_t cluster_size;
 
     bs->file = bdrv_open_child(NULL, options, "file", bs, &child_of_bds,
                                BDRV_CHILD_FILTERED | BDRV_CHILD_PRIMARY,
@@ -XXX,XX +XXX,XX @@ static int cbw_open(BlockDriverState *bs, QDict *options, int flags,
         return -EINVAL;
     }
 
+    cluster_size = block_copy_cluster_size(s->bcs);
+
+    s->done_bitmap = bdrv_create_dirty_bitmap(bs, cluster_size, NULL, errp);
+    if (!s->done_bitmap) {
+        return -EINVAL;
+    }
+    bdrv_disable_dirty_bitmap(s->done_bitmap);
+
+    /* s->access_bitmap starts equal to bcs bitmap */
+    s->access_bitmap = bdrv_create_dirty_bitmap(bs, cluster_size, NULL, errp);
+    if (!s->access_bitmap) {
+        return -EINVAL;
+    }
+    bdrv_disable_dirty_bitmap(s->access_bitmap);
+    bdrv_dirty_bitmap_merge_internal(s->access_bitmap,
+                                     block_copy_dirty_bitmap(s->bcs), NULL,
+                                     true);
+
+    qemu_co_mutex_init(&s->lock);
+    QLIST_INIT(&s->frozen_read_reqs);
+
     return 0;
 }
 
@@ -XXX,XX +XXX,XX @@ static void cbw_close(BlockDriverState *bs)
 {
     BDRVCopyBeforeWriteState *s = bs->opaque;
 
+    bdrv_release_dirty_bitmap(s->access_bitmap);
+    bdrv_release_dirty_bitmap(s->done_bitmap);
+
     block_copy_state_free(s->bcs);
     s->bcs = NULL;
 }
@@ -XXX,XX +XXX,XX @@ BlockDriver bdrv_cbw_filter = {
     .bdrv_co_pdiscard           = cbw_co_pdiscard,
     .bdrv_co_flush              = cbw_co_flush,
 
+    .bdrv_co_preadv_snapshot       = cbw_co_preadv_snapshot,
+    .bdrv_co_pdiscard_snapshot     = cbw_co_pdiscard_snapshot,
+    .bdrv_co_snapshot_block_status = cbw_co_snapshot_block_status,
+
     .bdrv_refresh_filename      = cbw_refresh_filename,
 
     .bdrv_child_perm            = cbw_child_perm,
diff --git a/tests/qemu-iotests/257.out b/tests/qemu-iotests/257.out
index XXXXXXX..XXXXXXX 100644
--- a/tests/qemu-iotests/257.out
+++ b/tests/qemu-iotests/257.out
@@ -XXX,XX +XXX,XX @@ write -P0x67 0x3fe0000 0x20000
 {"return": ""}
 {
   "bitmaps": {
+    "backup-top": [
+      {
+        "busy": false,
+        "count": 67108864,
+        "granularity": 65536,
+        "persistent": false,
+        "recording": false
+      },
+      {
+        "busy": false,
+        "count": 458752,
+        "granularity": 65536,
+        "persistent": false,
+        "recording": false
+      }
+    ],
     "drive0": [
       {
         "busy": false,
@@ -XXX,XX +XXX,XX @@ write -P0x67 0x3fe0000 0x20000
 {"return": ""}
 {
   "bitmaps": {
+    "backup-top": [
+      {
+        "busy": false,
+        "count": 67108864,
+        "granularity": 65536,
+        "persistent": false,
+        "recording": false
+      },
+      {
+        "busy": false,
+        "count": 458752,
+        "granularity": 65536,
+        "persistent": false,
+        "recording": false
+      }
+    ],
     "drive0": [
       {
         "busy": false,
@@ -XXX,XX +XXX,XX @@ write -P0x67 0x3fe0000 0x20000
 {"return": ""}
 {
   "bitmaps": {
+    "backup-top": [
+      {
+        "busy": false,
+        "count": 67108864,
+        "granularity": 65536,
+        "persistent": false,
+        "recording": false
+      },
+      {
+        "busy": false,
+        "count": 458752,
+        "granularity": 65536,
+        "persistent": false,
+        "recording": false
+      }
+    ],
     "drive0": [
       {
         "busy": false,
@@ -XXX,XX +XXX,XX @@ write -P0x67 0x3fe0000 0x20000
 {"return": ""}
 {
   "bitmaps": {
+    "backup-top": [
+      {
+        "busy": false,
+        "count": 67108864,
+        "granularity": 65536,
+        "persistent": false,
+        "recording": false
+      },
+      {
+        "busy": false,
+        "count": 458752,
+        "granularity": 65536,
+        "persistent": false,
+        "recording": false
+      }
+    ],
     "drive0": [
       {
         "busy": false,
@@ -XXX,XX +XXX,XX @@ write -P0x67 0x3fe0000 0x20000
 {"return": ""}
 {
   "bitmaps": {
+    "backup-top": [
+      {
+        "busy": false,
+        "count": 67108864,
+        "granularity": 65536,
+        "persistent": false,
+        "recording": false
+      },
+      {
+        "busy": false,
+        "count": 458752,
+        "granularity": 65536,
+        "persistent": false,
+        "recording": false
+      }
+    ],
     "drive0": [
       {
         "busy": false,
@@ -XXX,XX +XXX,XX @@ write -P0x67 0x3fe0000 0x20000
 {"return": ""}
 {
   "bitmaps": {
+    "backup-top": [
+      {
+        "busy": false,
+        "count": 67108864,
+        "granularity": 65536,
+        "persistent": false,
+        "recording": false
+      },
+      {
+        "busy": false,
+        "count": 458752,
+        "granularity": 65536,
+        "persistent": false,
+        "recording": false
+      }
+    ],
     "drive0": [
       {
         "busy": false,
@@ -XXX,XX +XXX,XX @@ write -P0x67 0x3fe0000 0x20000
 {"return": ""}
 {
   "bitmaps": {
+    "backup-top": [
+      {
+        "busy": false,
+        "count": 67108864,
+        "granularity": 65536,
+        "persistent": false,
+        "recording": false
+      },
+      {
+        "busy": false,
+        "count": 458752,
+        "granularity": 65536,
+        "persistent": false,
+        "recording": false
+      }
+    ],
     "drive0": [
       {
         "busy": false,
@@ -XXX,XX +XXX,XX @@ write -P0x67 0x3fe0000 0x20000
 {"return": ""}
 {
   "bitmaps": {
+    "backup-top": [
+      {
+        "busy": false,
+        "count": 67108864,
+        "granularity": 65536,
+        "persistent": false,
+        "recording": false
+      },
+      {
+        "busy": false,
+        "count": 458752,
+        "granularity": 65536,
+        "persistent": false,
+        "recording": false
+      }
+    ],
     "drive0": [
       {
         "busy": false,
@@ -XXX,XX +XXX,XX @@ write -P0x67 0x3fe0000 0x20000
 {"return": ""}
 {
   "bitmaps": {
+    "backup-top": [
+      {
+        "busy": false,
+        "count": 67108864,
+        "granularity": 65536,
+        "persistent": false,
+        "recording": false
+      },
+      {
+        "busy": false,
+        "count": 458752,
+        "granularity": 65536,
+        "persistent": false,
+        "recording": false
+      }
+    ],
     "drive0": [
       {
         "busy": false,
@@ -XXX,XX +XXX,XX @@ write -P0x67 0x3fe0000 0x20000
 {"return": ""}
 {
   "bitmaps": {
+    "backup-top": [
+      {
+        "busy": false,
+        "count": 67108864,
+        "granularity": 65536,
+        "persistent": false,
+        "recording": false
+      },
+      {
+        "busy": false,
+        "count": 458752,
+        "granularity": 65536,
+        "persistent": false,
+        "recording": false
+      }
+    ],
     "drive0": [
       {
         "busy": false,
@@ -XXX,XX +XXX,XX @@ write -P0x67 0x3fe0000 0x20000
 {"return": ""}
 {
   "bitmaps": {
+    "backup-top": [
+      {
+        "busy": false,
+        "count": 67108864,
+        "granularity": 65536,
+        "persistent": false,
+        "recording": false
+      },
+      {
+        "busy": false,
+        "count": 458752,
+        "granularity": 65536,
+        "persistent": false,
+        "recording": false
+      }
+    ],
     "drive0": [
       {
         "busy": false,
@@ -XXX,XX +XXX,XX @@ write -P0x67 0x3fe0000 0x20000
 {"return": ""}
 {
   "bitmaps": {
+    "backup-top": [
+      {
+        "busy": false,
+        "count": 67108864,
+        "granularity": 65536,
+        "persistent": false,
+        "recording": false
+      },
+      {
+        "busy": false,
+        "count": 458752,
+        "granularity": 65536,
+        "persistent": false,
+        "recording": false
+      }
+    ],
     "drive0": [
       {
         "busy": false,
@@ -XXX,XX +XXX,XX @@ write -P0x67 0x3fe0000 0x20000
 {"return": ""}
 {
   "bitmaps": {
+    "backup-top": [
+      {
+        "busy": false,
+        "count": 67108864,
+        "granularity": 65536,
+        "persistent": false,
+        "recording": false
+      },
+      {
+        "busy": false,
+        "count": 458752,
+        "granularity": 65536,
+        "persistent": false,
+        "recording": false
+      }
+    ],
     "drive0": [
       {
         "busy": false,
@@ -XXX,XX +XXX,XX @@ write -P0x67 0x3fe0000 0x20000
 {"return": ""}
 {
   "bitmaps": {
+    "backup-top": [
+      {
+        "busy": false,
+        "count": 67108864,
+        "granularity": 65536,
+        "persistent": false,
+        "recording": false
+      },
+      {
+        "busy": false,
+        "count": 458752,
+        "granularity": 65536,
+        "persistent": false,
+        "recording": false
+      }
+    ],
     "drive0": [
       {
         "busy": false,
-- 
2.34.1

From: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-14-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
---
 tests/qemu-iotests/tests/image-fleecing     | 64 +++++++++++++-----
 tests/qemu-iotests/tests/image-fleecing.out | 74 ++++++++++++++++++++-
 2 files changed, 119 insertions(+), 19 deletions(-)

diff --git a/tests/qemu-iotests/tests/image-fleecing b/tests/qemu-iotests/tests/image-fleecing
index XXXXXXX..XXXXXXX 100755
--- a/tests/qemu-iotests/tests/image-fleecing
+++ b/tests/qemu-iotests/tests/image-fleecing
@@ -XXX,XX +XXX,XX @@ remainder = [('0xd5', '0x108000',  '32k'), # Right-end of partial-left [1]
              ('0xdc', '32M',       '32k'), # Left-end of partial-right [2]
              ('0xcd', '0x3ff0000', '64k')] # patterns[3]
 
-def do_test(use_cbw, base_img_path, fleece_img_path, nbd_sock_path, vm):
+def do_test(use_cbw, use_snapshot_access_filter, base_img_path,
+            fleece_img_path, nbd_sock_path, vm):
     log('--- Setting up images ---')
     log('')
 
     assert qemu_img('create', '-f', iotests.imgfmt, base_img_path, '64M') == 0
-    assert qemu_img('create', '-f', 'qcow2', fleece_img_path, '64M') == 0
+    if use_snapshot_access_filter:
+        assert use_cbw
+        assert qemu_img('create', '-f', 'raw', fleece_img_path, '64M') == 0
+    else:
+        assert qemu_img('create', '-f', 'qcow2', fleece_img_path, '64M') == 0
 
     for p in patterns:
         qemu_io('-f', iotests.imgfmt,
@@ -XXX,XX +XXX,XX @@ def do_test(use_cbw, base_img_path, fleece_img_path, nbd_sock_path, vm):
     log('')
 
 
-    # create tmp_node backed by src_node
-    log(vm.qmp('blockdev-add', {
-        'driver': 'qcow2',
-        'node-name': tmp_node,
-        'file': {
+    if use_snapshot_access_filter:
+        log(vm.qmp('blockdev-add', {
+            'node-name': tmp_node,
             'driver': 'file',
             'filename': fleece_img_path,
-        },
-        'backing': src_node,
-    }))
+        }))
+    else:
+        # create tmp_node backed by src_node
+        log(vm.qmp('blockdev-add', {
+            'driver': 'qcow2',
+            'node-name': tmp_node,
+            'file': {
+                'driver': 'file',
+                'filename': fleece_img_path,
+            },
+            'backing': src_node,
+        }))
 
     # Establish CBW from source to fleecing node
     if use_cbw:
@@ -XXX,XX +XXX,XX @@ def do_test(use_cbw, base_img_path, fleece_img_path, nbd_sock_path, vm):
         }))
 
         log(vm.qmp('qom-set', path=qom_path, property='drive', value='fl-cbw'))
+
+        if use_snapshot_access_filter:
+            log(vm.qmp('blockdev-add', {
+                'driver': 'snapshot-access',
+                'node-name': 'fl-access',
+                'file': 'fl-cbw',
+            }))
     else:
         log(vm.qmp('blockdev-backup',
                    job_id='fleecing',
@@ -XXX,XX +XXX,XX @@ def do_test(use_cbw, base_img_path, fleece_img_path, nbd_sock_path, vm):
                    target=tmp_node,
                    sync='none'))
 
+    export_node = 'fl-access' if use_snapshot_access_filter else tmp_node
+
     log('')
     log('--- Setting up NBD Export ---')
     log('')
 
-    nbd_uri = 'nbd+unix:///%s?socket=%s' % (tmp_node, nbd_sock_path)
+    nbd_uri = 'nbd+unix:///%s?socket=%s' % (export_node, nbd_sock_path)
     log(vm.qmp('nbd-server-start',
                {'addr': {'type': 'unix',
                          'data': {'path': nbd_sock_path}}}))
 
-    log(vm.qmp('nbd-server-add', device=tmp_node))
+    log(vm.qmp('nbd-server-add', device=export_node))
 
     log('')
     log('--- Sanity Check ---')
@@ -XXX,XX +XXX,XX @@ def do_test(use_cbw, base_img_path, fleece_img_path, nbd_sock_path, vm):
     log('--- Cleanup ---')
     log('')
 
+    log(vm.qmp('nbd-server-stop'))
+
     if use_cbw:
+        if use_snapshot_access_filter:
+            log(vm.qmp('blockdev-del', node_name='fl-access'))
         log(vm.qmp('qom-set', path=qom_path, property='drive', value=src_node))
         log(vm.qmp('blockdev-del', node_name='fl-cbw'))
     else:
@@ -XXX,XX +XXX,XX @@ def do_test(use_cbw, base_img_path, fleece_img_path, nbd_sock_path, vm):
         assert e is not None
         log(e, filters=[iotests.filter_qmp_event])
 
-    log(vm.qmp('nbd-server-stop'))
     log(vm.qmp('blockdev-del', node_name=tmp_node))
     vm.shutdown()
 
@@ -XXX,XX +XXX,XX @@ def do_test(use_cbw, base_img_path, fleece_img_path, nbd_sock_path, vm):
     log('Done')
 
 
-def test(use_cbw):
+def test(use_cbw, use_snapshot_access_filter):
     with iotests.FilePath('base.img') as base_img_path, \
          iotests.FilePath('fleece.img') as fleece_img_path, \
          iotests.FilePath('nbd.sock',
                           base_dir=iotests.sock_dir) as nbd_sock_path, \
          iotests.VM() as vm:
-        do_test(use_cbw, base_img_path, fleece_img_path, nbd_sock_path, vm)
+        do_test(use_cbw, use_snapshot_access_filter, base_img_path,
+                fleece_img_path, nbd_sock_path, vm)
 
 
 log('=== Test backup(sync=none) based fleecing ===\n')
-test(False)
+test(False, False)
+
+log('=== Test cbw-filter based fleecing ===\n')
+test(True, False)
 
-log('=== Test filter based fleecing ===\n')
-test(True)
+log('=== Test fleecing-format based fleecing ===\n')
+test(True, True)
diff --git a/tests/qemu-iotests/tests/image-fleecing.out b/tests/qemu-iotests/tests/image-fleecing.out
index XXXXXXX..XXXXXXX 100644
--- a/tests/qemu-iotests/tests/image-fleecing.out
+++ b/tests/qemu-iotests/tests/image-fleecing.out
@@ -XXX,XX +XXX,XX @@ read -P0 0x3fe0000 64k
 
 --- Cleanup ---
 
+{"return": {}}
 {"return": {}}
 {"data": {"device": "fleecing", "len": 67108864, "offset": 393216, "speed": 0, "type": "backup"}, "event": "BLOCK_JOB_CANCELLED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
 {"return": {}}
+
+--- Confirming writes ---
+
+read -P0xab 0 64k
+read -P0xad 0x00f8000 64k
+read -P0x1d 0x2008000 64k
+read -P0xea 0x3fe0000 64k
+read -P0xd5 0x108000 32k
+read -P0xdc 32M 32k
+read -P0xcd 0x3ff0000 64k
+
+Done
+=== Test cbw-filter based fleecing ===
+
+--- Setting up images ---
+
+Done
+
+--- Launching VM ---
+
+Done
+
+--- Setting up Fleecing Graph ---
+
+{"return": {}}
+{"return": {}}
+{"return": {}}
+
+--- Setting up NBD Export ---
+
+{"return": {}}
+{"return": {}}
+
+--- Sanity Check ---
+
+read -P0x5d 0 64k
+read -P0xd5 1M 64k
+read -P0xdc 32M 64k
+read -P0xcd 0x3ff0000 64k
+read -P0 0x00f8000 32k
+read -P0 0x2010000 32k
+read -P0 0x3fe0000 64k
+
+--- Testing COW ---
+
+write -P0xab 0 64k
+{"return": ""}
+write -P0xad 0x00f8000 64k
+{"return": ""}
+write -P0x1d 0x2008000 64k
+{"return": ""}
+write -P0xea 0x3fe0000 64k
+{"return": ""}
+
+--- Verifying Data ---
+
+read -P0x5d 0 64k
+read -P0xd5 1M 64k
+read -P0xdc 32M 64k
+read -P0xcd 0x3ff0000 64k
+read -P0 0x00f8000 32k
+read -P0 0x2010000 32k
+read -P0 0x3fe0000 64k
+
+--- Cleanup ---
+
+{"return": {}}
+{"return": {}}
+{"return": {}}
 {"return": {}}
 
 --- Confirming writes ---
@@ -XXX,XX +XXX,XX @@ read -P0xdc 32M 32k
 read -P0xcd 0x3ff0000 64k
 
 Done
-=== Test filter based fleecing ===
+=== Test fleecing-format based fleecing ===
 
 --- Setting up images ---
 
@@ -XXX,XX +XXX,XX @@ Done
 {"return": {}}
 {"return": {}}
 {"return": {}}
+{"return": {}}
 
 --- Setting up NBD Export ---
 
@@ -XXX,XX +XXX,XX @@ read -P0 0x3fe0000 64k
 {"return": {}}
 {"return": {}}
 {"return": {}}
+{"return": {}}
 
 --- Confirming writes ---
 
-- 
2.34.1

From: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>

Note that reads zero areas (not dirty in the bitmap) fails, that's
correct.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20220303194349.2304213-16-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
---
 tests/qemu-iotests/tests/image-fleecing     | 38 +++++++---
 tests/qemu-iotests/tests/image-fleecing.out | 84 +++++++++++++++++++++
 2 files changed, 113 insertions(+), 9 deletions(-)

From: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20220303194349.2304213-17-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
---
 tests/qemu-iotests/tests/image-fleecing     | 125 +++++++++++++++-----
 tests/qemu-iotests/tests/image-fleecing.out |  63 ++++++++++
 2 files changed, 156 insertions(+), 32 deletions(-)

diff --git a/tests/qemu-iotests/tests/image-fleecing b/tests/qemu-iotests/tests/image-fleecing
index XXXXXXX..XXXXXXX 100755
--- a/tests/qemu-iotests/tests/image-fleecing
+++ b/tests/qemu-iotests/tests/image-fleecing
@@ -XXX,XX +XXX,XX @@ remainder = [('0xd5', '0x108000',  '32k'), # Right-end of partial-left [1]
              ('0xdc', '32M',       '32k'), # Left-end of partial-right [2]
              ('0xcd', '0x3ff0000', '64k')] # patterns[3]
 
-def do_test(use_cbw, use_snapshot_access_filter, base_img_path,
-            fleece_img_path, nbd_sock_path, vm,
+def do_test(vm, use_cbw, use_snapshot_access_filter, base_img_path,
+            fleece_img_path, nbd_sock_path=None,
+            target_img_path=None,
             bitmap=False):
+    push_backup = target_img_path is not None
+    assert (nbd_sock_path is not None) != push_backup
+    if push_backup:
+        assert use_cbw
+
     log('--- Setting up images ---')
     log('')
 
@@ -XXX,XX +XXX,XX @@ def do_test(use_cbw, use_snapshot_access_filter, base_img_path,
     else:
         assert qemu_img('create', '-f', 'qcow2', fleece_img_path, '64M') == 0
 
+    if push_backup:
+        assert qemu_img('create', '-f', 'qcow2', target_img_path, '64M') == 0
+
     for p in patterns:
         qemu_io('-f', iotests.imgfmt,
                 '-c', 'write -P%s %s %s' % p, base_img_path)
@@ -XXX,XX +XXX,XX @@ def do_test(use_cbw, use_snapshot_access_filter, base_img_path,
 
     export_node = 'fl-access' if use_snapshot_access_filter else tmp_node
 
-    log('')
-    log('--- Setting up NBD Export ---')
-    log('')
+    if push_backup:
+        log('')
+        log('--- Starting actual backup ---')
+        log('')
 
-    nbd_uri = 'nbd+unix:///%s?socket=%s' % (export_node, nbd_sock_path)
-    log(vm.qmp('nbd-server-start',
-               {'addr': {'type': 'unix',
-                         'data': {'path': nbd_sock_path}}}))
+        log(vm.qmp('blockdev-add', **{
+            'driver': iotests.imgfmt,
+            'node-name': 'target',
+            'file': {
+                'driver': 'file',
+                'filename': target_img_path
+            }
+        }))
+        log(vm.qmp('blockdev-backup', device=export_node,
+                   sync='full', target='target',
+                   job_id='push-backup', speed=1))
+    else:
+        log('')
+        log('--- Setting up NBD Export ---')
+        log('')
 
-    log(vm.qmp('nbd-server-add', device=export_node))
+        nbd_uri = 'nbd+unix:///%s?socket=%s' % (export_node, nbd_sock_path)
+        log(vm.qmp('nbd-server-start',
+                   {'addr': { 'type': 'unix',
+                              'data': { 'path': nbd_sock_path } } }))
 
-    log('')
-    log('--- Sanity Check ---')
-    log('')
+        log(vm.qmp('nbd-server-add', device=export_node))
 
-    for p in patterns + zeroes:
-        cmd = 'read -P%s %s %s' % p
-        log(cmd)
-        out, ret = qemu_io_pipe_and_status('-r', '-f', 'raw', '-c', cmd,
-                                           nbd_uri)
-        if ret != 0:
-            print(out)
+        log('')
+        log('--- Sanity Check ---')
+        log('')
+
+        for p in patterns + zeroes:
+            cmd = 'read -P%s %s %s' % p
+            log(cmd)
+            out, ret = qemu_io_pipe_and_status('-r', '-f', 'raw', '-c', cmd,
+                                               nbd_uri)
+            if ret != 0:
+                print(out)
 
     log('')
     log('--- Testing COW ---')
@@ -XXX,XX +XXX,XX @@ def do_test(use_cbw, use_snapshot_access_filter, base_img_path,
         log(cmd)
         log(vm.hmp_qemu_io(qom_path, cmd, qdev=True))
 
+    if push_backup:
+        # Check that previous operations were done during backup, not after
+        # If backup is already finished, it's possible that it was finished
+        # even before hmp qemu_io write, and we didn't actually test
+        # copy-before-write operation. This should not happen, as we use
+        # speed=1. But worth checking.
+        result = vm.qmp('query-block-jobs')
+        assert len(result['return']) == 1
+
+        result = vm.qmp('block-job-set-speed', device='push-backup', speed=0)
+        assert result == {'return': {}}
+
+        log(vm.event_wait(name='BLOCK_JOB_COMPLETED',
+                          match={'data': {'device': 'push-backup'}}),
+            filters=[iotests.filter_qmp_event])
+        log(vm.qmp('blockdev-del', node_name='target'))
+
     log('')
     log('--- Verifying Data ---')
     log('')
@@ -XXX,XX +XXX,XX @@ def do_test(use_cbw, use_snapshot_access_filter, base_img_path,
     for p in patterns + zeroes:
         cmd = 'read -P%s %s %s' % p
         log(cmd)
-        out, ret = qemu_io_pipe_and_status('-r', '-f', 'raw', '-c', cmd,
-                                           nbd_uri)
+        args = ['-r', '-c', cmd]
+        if push_backup:
+            args += [target_img_path]
+        else:
+            args += ['-f', 'raw', nbd_uri]
+        out, ret = qemu_io_pipe_and_status(*args)
         if ret != 0:
             print(out)
 
@@ -XXX,XX +XXX,XX @@ def do_test(use_cbw, use_snapshot_access_filter, base_img_path,
     log('--- Cleanup ---')
     log('')
 
-    log(vm.qmp('nbd-server-stop'))
+    if not push_backup:
+        log(vm.qmp('nbd-server-stop'))
 
     if use_cbw:
         if use_snapshot_access_filter:
@@ -XXX,XX +XXX,XX @@ def do_test(use_cbw, use_snapshot_access_filter, base_img_path,
     log('Done')
 
 
-def test(use_cbw, use_snapshot_access_filter, bitmap=False):
+def test(use_cbw, use_snapshot_access_filter,
+         nbd_sock_path=None, target_img_path=None, bitmap=False):
     with iotests.FilePath('base.img') as base_img_path, \
          iotests.FilePath('fleece.img') as fleece_img_path, \
-         iotests.FilePath('nbd.sock',
-                          base_dir=iotests.sock_dir) as nbd_sock_path, \
          iotests.VM() as vm:
-        do_test(use_cbw, use_snapshot_access_filter, base_img_path,
-                fleece_img_path, nbd_sock_path, vm, bitmap=bitmap)
+        do_test(vm, use_cbw, use_snapshot_access_filter, base_img_path,
+                fleece_img_path, nbd_sock_path, target_img_path,
+                bitmap=bitmap)
+
+def test_pull(use_cbw, use_snapshot_access_filter, bitmap=False):
+    with iotests.FilePath('nbd.sock',
+                          base_dir=iotests.sock_dir) as nbd_sock_path:
+        test(use_cbw, use_snapshot_access_filter, nbd_sock_path, None,
+             bitmap=bitmap)
+
+def test_push():
+    with iotests.FilePath('target.img') as target_img_path:
+        test(True, True, None, target_img_path)
 
 
 log('=== Test backup(sync=none) based fleecing ===\n')
-test(False, False)
+test_pull(False, False)
 
 log('=== Test cbw-filter based fleecing ===\n')
-test(True, False)
+test_pull(True, False)
 
 log('=== Test fleecing-format based fleecing ===\n')
-test(True, True)
+test_pull(True, True)
 
 log('=== Test fleecing-format based fleecing with bitmap ===\n')
-test(True, True, bitmap=True)
+test_pull(True, True, bitmap=True)
+
+log('=== Test push backup with fleecing ===\n')
+test_push()
diff --git a/tests/qemu-iotests/tests/image-fleecing.out b/tests/qemu-iotests/tests/image-fleecing.out
index XXXXXXX..XXXXXXX 100644
--- a/tests/qemu-iotests/tests/image-fleecing.out
+++ b/tests/qemu-iotests/tests/image-fleecing.out
@@ -XXX,XX +XXX,XX @@ read -P0xdc 32M 32k
 read -P0xcd 0x3ff0000 64k
 
 Done
+=== Test push backup with fleecing ===
+
+--- Setting up images ---
+
+Done
+
+--- Launching VM ---
+
+Done
+
+--- Setting up Fleecing Graph ---
+
+{"return": {}}
+{"return": {}}
+{"return": {}}
+{"return": {}}
+
+--- Starting actual backup ---
+
+{"return": {}}
+{"return": {}}
+
+--- Testing COW ---
+
+write -P0xab 0 64k
+{"return": ""}
+write -P0xad 0x00f8000 64k
+{"return": ""}
+write -P0x1d 0x2008000 64k
+{"return": ""}
+write -P0xea 0x3fe0000 64k
+{"return": ""}
+{"data": {"device": "push-backup", "len": 67108864, "offset": 67108864, "speed": 0, "type": "backup"}, "event": "BLOCK_JOB_COMPLETED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"return": {}}
+
+--- Verifying Data ---
+
+read -P0x5d 0 64k
+read -P0xd5 1M 64k
+read -P0xdc 32M 64k
+read -P0xcd 0x3ff0000 64k
+read -P0 0x00f8000 32k
+read -P0 0x2010000 32k
+read -P0 0x3fe0000 64k
+
+--- Cleanup ---
+
+{"return": {}}
+{"return": {}}
+{"return": {}}
+{"return": {}}
+
+--- Confirming writes ---
+
+read -P0xab 0 64k
+read -P0xad 0x00f8000 64k
+read -P0x1d 0x2008000 64k
+read -P0xea 0x3fe0000 64k
+read -P0xd5 0x108000 32k
+read -P0xdc 32M 32k
+read -P0xcd 0x3ff0000 64k
+
+Done
-- 
2.34.1

The following changes since commit 1214d55d1c41fbab3a9973a05085b8760647e411:

Merge remote-tracking branch 'remotes/nvme/tags/nvme-next-pull-request' into staging (2021-02-09 13:24:37 +0000)

are available in the Git repository at:

https://gitlab.com/stefanha/qemu.git tags/block-pull-request

for you to fetch changes up to eb847c42296497978942f738cd41dc29a35a49b2:

docs: fix Parallels Image "dirty bitmap" section (2021-02-10 09:23:28 +0000)

----------------------------------------------------------------
Pull request

v4:
 * Add PCI_EXPRESS Kconfig dependency to fix s390x in "multi-process: setup PCI
   host bridge for remote device" [Philippe and Thomas]

----------------------------------------------------------------

Denis V. Lunev (1):
  docs: fix Parallels Image "dirty bitmap" section

Elena Ufimtseva (8):
  multi-process: add configure and usage information
  io: add qio_channel_writev_full_all helper
  io: add qio_channel_readv_full_all_eof & qio_channel_readv_full_all
    helpers
  multi-process: define MPQemuMsg format and transmission functions
  multi-process: introduce proxy object
  multi-process: add proxy communication functions
  multi-process: Forward PCI config space acceses to the remote process
  multi-process: perform device reset in the remote process

Jagannathan Raman (11):
  memory: alloc RAM from file at offset
  multi-process: Add config option for multi-process QEMU
  multi-process: setup PCI host bridge for remote device
  multi-process: setup a machine object for remote device process
  multi-process: Initialize message handler in remote device
  multi-process: Associate fd of a PCIDevice with its object
  multi-process: setup memory manager for remote device
  multi-process: PCI BAR read/write handling for proxy & remote
    endpoints
  multi-process: Synchronize remote memory
  multi-process: create IOHUB object to handle irq
  multi-process: Retrieve PCI info from remote process

John G Johnson (1):
  multi-process: add the concept description to
    docs/devel/qemu-multiprocess

Stefan Hajnoczi (6):
  .github: point Repo Lockdown bot to GitLab repo
  gitmodules: use GitLab repos instead of qemu.org
  gitlab-ci: remove redundant GitLab repo URL command
  docs: update README to use GitLab repo URLs
  pc-bios: update mirror URLs to GitLab
  get_maintainer: update repo URL to GitLab

MAINTAINERS                               |  24 +
 README.rst                                |   4 +-
 docs/devel/index.rst                      |   1 +
 docs/devel/multi-process.rst              | 966 ++++++++++++++++++++++
 docs/system/index.rst                     |   1 +
 docs/system/multi-process.rst             |  64 ++
 docs/interop/parallels.txt                |   2 +-
 configure                                 |  10 +
 meson.build                               |   5 +-
 hw/remote/trace.h                         |   1 +
 include/exec/memory.h                     |   2 +
 include/exec/ram_addr.h                   |   4 +-
 include/hw/pci-host/remote.h              |  30 +
 include/hw/pci/pci_ids.h                  |   3 +
 include/hw/remote/iohub.h                 |  42 +
 include/hw/remote/machine.h               |  38 +
 include/hw/remote/memory.h                |  19 +
 include/hw/remote/mpqemu-link.h           |  99 +++
 include/hw/remote/proxy-memory-listener.h |  28 +
 include/hw/remote/proxy.h                 |  48 ++
 include/io/channel.h                      |  78 ++
 include/qemu/mmap-alloc.h                 |   4 +-
 include/sysemu/iothread.h                 |   6 +
 backends/hostmem-memfd.c                  |   2 +-
 hw/misc/ivshmem.c                         |   3 +-
 hw/pci-host/remote.c                      |  75 ++
 hw/remote/iohub.c                         | 119 +++
 hw/remote/machine.c                       |  80 ++
 hw/remote/memory.c                        |  65 ++
 hw/remote/message.c                       | 230 ++++++
 hw/remote/mpqemu-link.c                   | 267 ++++++
 hw/remote/proxy-memory-listener.c         | 227 +++++
 hw/remote/proxy.c                         | 379 +++++++++
 hw/remote/remote-obj.c                    | 203 +++++
 io/channel.c                              | 116 ++-
 iothread.c                                |   6 +
 softmmu/memory.c                          |   3 +-
 softmmu/physmem.c                         |  12 +-
 util/mmap-alloc.c                         |   8 +-
 util/oslib-posix.c                        |   2 +-
 .github/lockdown.yml                      |   8 +-
 .gitlab-ci.yml                            |   1 -
 .gitmodules                               |  44 +-
 Kconfig.host                              |   4 +
 hw/Kconfig                                |   1 +
 hw/meson.build                            |   1 +
 hw/pci-host/Kconfig                       |   3 +
 hw/pci-host/meson.build                   |   1 +
 hw/remote/Kconfig                         |   4 +
 hw/remote/meson.build                     |  13 +
 hw/remote/trace-events                    |   4 +
 pc-bios/README                            |   4 +-
 scripts/get_maintainer.pl                 |   2 +-
 53 files changed, 3296 insertions(+), 70 deletions(-)
 create mode 100644 docs/devel/multi-process.rst
 create mode 100644 docs/system/multi-process.rst
 create mode 100644 hw/remote/trace.h
 create mode 100644 include/hw/pci-host/remote.h
 create mode 100644 include/hw/remote/iohub.h
 create mode 100644 include/hw/remote/machine.h
 create mode 100644 include/hw/remote/memory.h
 create mode 100644 include/hw/remote/mpqemu-link.h
 create mode 100644 include/hw/remote/proxy-memory-listener.h
 create mode 100644 include/hw/remote/proxy.h
 create mode 100644 hw/pci-host/remote.c
 create mode 100644 hw/remote/iohub.c
 create mode 100644 hw/remote/machine.c
 create mode 100644 hw/remote/memory.c
 create mode 100644 hw/remote/message.c
 create mode 100644 hw/remote/mpqemu-link.c
 create mode 100644 hw/remote/proxy-memory-listener.c
 create mode 100644 hw/remote/proxy.c
 create mode 100644 hw/remote/remote-obj.c
 create mode 100644 hw/remote/Kconfig
 create mode 100644 hw/remote/meson.build
 create mode 100644 hw/remote/trace-events

-- 
2.29.2

Use the GitLab repo URL as the main repo location in order to reduce
load on qemu.org.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20210111115017.156802-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 .github/lockdown.yml | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/.github/lockdown.yml b/.github/lockdown.yml
index XXXXXXX..XXXXXXX 100644
--- a/.github/lockdown.yml
+++ b/.github/lockdown.yml
@@ -XXX,XX +XXX,XX @@ issues:
   comment: |
     Thank you for your interest in the QEMU project.
 
-    This repository is a read-only mirror of the project's master
-    repostories hosted on https://git.qemu.org/git/qemu.git.
+    This repository is a read-only mirror of the project's repostories hosted
+    at https://gitlab.com/qemu-project/qemu.git.
     The project does not process issues filed on GitHub.
 
     The project issues are tracked on Launchpad:
@@ -XXX,XX +XXX,XX @@ pulls:
   comment: |
     Thank you for your interest in the QEMU project.
 
-    This repository is a read-only mirror of the project's master
-    repostories hosted on https://git.qemu.org/git/qemu.git.
+    This repository is a read-only mirror of the project's repostories hosted
+    on https://gitlab.com/qemu-project/qemu.git.
     The project does not process merge requests filed on GitHub.
 
     QEMU welcomes contributions of code (either fixing bugs or adding new
-- 
2.29.2

qemu.org is running out of bandwidth and the QEMU project is moving
towards a gating CI on GitLab. Use the GitLab repos instead of qemu.org
(they will become mirrors).

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210111115017.156802-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 .gitmodules | 44 ++++++++++++++++++++++----------------------
 1 file changed, 22 insertions(+), 22 deletions(-)

diff --git a/.gitmodules b/.gitmodules
index XXXXXXX..XXXXXXX 100644
--- a/.gitmodules
+++ b/.gitmodules
@@ -XXX,XX +XXX,XX @@
 [submodule "roms/seabios"]
 	path = roms/seabios
-	url = https://git.qemu.org/git/seabios.git/
+	url = https://gitlab.com/qemu-project/seabios.git/
 [submodule "roms/SLOF"]
 	path = roms/SLOF
-	url = https://git.qemu.org/git/SLOF.git
+	url = https://gitlab.com/qemu-project/SLOF.git
 [submodule "roms/ipxe"]
 	path = roms/ipxe
-	url = https://git.qemu.org/git/ipxe.git
+	url = https://gitlab.com/qemu-project/ipxe.git
 [submodule "roms/openbios"]
 	path = roms/openbios
-	url = https://git.qemu.org/git/openbios.git
+	url = https://gitlab.com/qemu-project/openbios.git
 [submodule "roms/qemu-palcode"]
 	path = roms/qemu-palcode
-	url = https://git.qemu.org/git/qemu-palcode.git
+	url = https://gitlab.com/qemu-project/qemu-palcode.git
 [submodule "roms/sgabios"]
 	path = roms/sgabios
-	url = https://git.qemu.org/git/sgabios.git
+	url = https://gitlab.com/qemu-project/sgabios.git
 [submodule "dtc"]
 	path = dtc
-	url = https://git.qemu.org/git/dtc.git
+	url = https://gitlab.com/qemu-project/dtc.git
 [submodule "roms/u-boot"]
 	path = roms/u-boot
-	url = https://git.qemu.org/git/u-boot.git
+	url = https://gitlab.com/qemu-project/u-boot.git
 [submodule "roms/skiboot"]
 	path = roms/skiboot
-	url = https://git.qemu.org/git/skiboot.git
+	url = https://gitlab.com/qemu-project/skiboot.git
 [submodule "roms/QemuMacDrivers"]
 	path = roms/QemuMacDrivers
-	url = https://git.qemu.org/git/QemuMacDrivers.git
+	url = https://gitlab.com/qemu-project/QemuMacDrivers.git
 [submodule "ui/keycodemapdb"]
 	path = ui/keycodemapdb
-	url = https://git.qemu.org/git/keycodemapdb.git
+	url = https://gitlab.com/qemu-project/keycodemapdb.git
 [submodule "capstone"]
 	path = capstone
-	url = https://git.qemu.org/git/capstone.git
+	url = https://gitlab.com/qemu-project/capstone.git
 [submodule "roms/seabios-hppa"]
 	path = roms/seabios-hppa
-	url = https://git.qemu.org/git/seabios-hppa.git
+	url = https://gitlab.com/qemu-project/seabios-hppa.git
 [submodule "roms/u-boot-sam460ex"]
 	path = roms/u-boot-sam460ex
-	url = https://git.qemu.org/git/u-boot-sam460ex.git
+	url = https://gitlab.com/qemu-project/u-boot-sam460ex.git
 [submodule "tests/fp/berkeley-testfloat-3"]
 	path = tests/fp/berkeley-testfloat-3
-	url = https://git.qemu.org/git/berkeley-testfloat-3.git
+	url = https://gitlab.com/qemu-project/berkeley-testfloat-3.git
 [submodule "tests/fp/berkeley-softfloat-3"]
 	path = tests/fp/berkeley-softfloat-3
-	url = https://git.qemu.org/git/berkeley-softfloat-3.git
+	url = https://gitlab.com/qemu-project/berkeley-softfloat-3.git
 [submodule "roms/edk2"]
 	path = roms/edk2
-	url = https://git.qemu.org/git/edk2.git
+	url = https://gitlab.com/qemu-project/edk2.git
 [submodule "slirp"]
 	path = slirp
-	url = https://git.qemu.org/git/libslirp.git
+	url = https://gitlab.com/qemu-project/libslirp.git
 [submodule "roms/opensbi"]
 	path = roms/opensbi
-	url = 	https://git.qemu.org/git/opensbi.git
+	url = 	https://gitlab.com/qemu-project/opensbi.git
 [submodule "roms/qboot"]
 	path = roms/qboot
-	url = https://git.qemu.org/git/qboot.git
+	url = https://gitlab.com/qemu-project/qboot.git
 [submodule "meson"]
 	path = meson
-	url = https://git.qemu.org/git/meson.git
+	url = https://gitlab.com/qemu-project/meson.git
 [submodule "roms/vbootrom"]
 	path = roms/vbootrom
-	url = https://git.qemu.org/git/vbootrom.git
+	url = https://gitlab.com/qemu-project/vbootrom.git
-- 
2.29.2

qemu.org is running out of bandwidth and the QEMU project is moving
towards a gating CI on GitLab. Use the GitLab repos instead of qemu.org
(they will become mirrors).

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210111115017.156802-5-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 README.rst | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/README.rst b/README.rst
index XXXXXXX..XXXXXXX 100644
--- a/README.rst
+++ b/README.rst
@@ -XXX,XX +XXX,XX @@ The QEMU source code is maintained under the GIT version control system.
 
 .. code-block:: shell
 
-   git clone https://git.qemu.org/git/qemu.git
+   git clone https://gitlab.com/qemu-project/qemu.git
 
 When submitting patches, one common approach is to use 'git
 format-patch' and/or 'git send-email' to format & send the mail to the
@@ -XXX,XX +XXX,XX @@ The QEMU website is also maintained under source control.
 
 .. code-block:: shell
 
-  git clone https://git.qemu.org/git/qemu-web.git
+  git clone https://gitlab.com/qemu-project/qemu-web.git
 
 * `<https://www.qemu.org/2017/02/04/the-new-qemu-website-is-up/>`_
 
-- 
2.29.2

qemu.org is running out of bandwidth and the QEMU project is moving
towards a gating CI on GitLab. Use the GitLab repos instead of qemu.org
(they will become mirrors).

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210111115017.156802-6-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 pc-bios/README | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/pc-bios/README b/pc-bios/README
index XXXXXXX..XXXXXXX 100644
--- a/pc-bios/README
+++ b/pc-bios/README
@@ -XXX,XX +XXX,XX @@
   legacy x86 software to communicate with an attached serial console as
   if a video card were attached.  The master sources reside in a subversion
   repository at http://sgabios.googlecode.com/svn/trunk.  A git mirror is
-  available at https://git.qemu.org/git/sgabios.git.
+  available at https://gitlab.com/qemu-project/sgabios.git.
 
 - The PXE roms come from the iPXE project. Built with BANNER_TIME 0.
   Sources available at http://ipxe.org.  Vendor:Device ID -> ROM mapping:
@@ -XXX,XX +XXX,XX @@
 
 - The u-boot binary for e500 comes from the upstream denx u-boot project where
   it was compiled using the qemu-ppce500 target.
-  A git mirror is available at: https://git.qemu.org/git/u-boot.git
+  A git mirror is available at: https://gitlab.com/qemu-project/u-boot.git
   The hash used to compile the current version is: 2072e72
 
 - Skiboot (https://github.com/open-power/skiboot/) is an OPAL
-- 
2.29.2

qemu.org is running out of bandwidth and the QEMU project is moving
towards a gating CI on GitLab. Use the GitLab repos instead of qemu.org
(they will become mirrors).

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210111115017.156802-7-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 scripts/get_maintainer.pl | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl
index XXXXXXX..XXXXXXX 100755
--- a/scripts/get_maintainer.pl
+++ b/scripts/get_maintainer.pl
@@ -XXX,XX +XXX,XX @@ sub vcs_exists {
 	warn("$P: No supported VCS found.  Add --nogit to options?\n");
 	warn("Using a git repository produces better results.\n");
 	warn("Try latest git repository using:\n");
-	warn("git clone https://git.qemu.org/git/qemu.git\n");
+	warn("git clone https://gitlab.com/qemu-project/qemu.git\n");
 	$printed_novcs = 1;
     }
     return 0;
-- 
2.29.2

From: John G Johnson <john.g.johnson@oracle.com>

Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 02a68adef99f5df6a380bf8fd7b90948777e411c.1611938319.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 MAINTAINERS                  |   7 +
 docs/devel/index.rst         |   1 +
 docs/devel/multi-process.rst | 966 +++++++++++++++++++++++++++++++++++
 3 files changed, 974 insertions(+)
 create mode 100644 docs/devel/multi-process.rst

diff --git a/MAINTAINERS b/MAINTAINERS
index XXXXXXX..XXXXXXX 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -XXX,XX +XXX,XX @@ S: Maintained
 F: hw/semihosting/
 F: include/hw/semihosting/
 
+Multi-process QEMU
+M: Elena Ufimtseva <elena.ufimtseva@oracle.com>
+M: Jagannathan Raman <jag.raman@oracle.com>
+M: John G Johnson <john.g.johnson@oracle.com>
+S: Maintained
+F: docs/devel/multi-process.rst
+
 Build and test automation
 -------------------------
 Build and test automation
diff --git a/docs/devel/index.rst b/docs/devel/index.rst
index XXXXXXX..XXXXXXX 100644
--- a/docs/devel/index.rst
+++ b/docs/devel/index.rst
@@ -XXX,XX +XXX,XX @@ Contents:
    clocks
    qom
    block-coroutine-wrapper
+   multi-process
diff --git a/docs/devel/multi-process.rst b/docs/devel/multi-process.rst
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/docs/devel/multi-process.rst
@@ -XXX,XX +XXX,XX @@
+This is the design document for multi-process QEMU. It does not
+necessarily reflect the status of the current implementation, which
+may lack features or be considerably different from what is described
+in this document. This document is still useful as a description of
+the goals and general direction of this feature.
+
+Please refer to the following wiki for latest details:
+https://wiki.qemu.org/Features/MultiProcessQEMU
+
+Multi-process QEMU
+===================
+
+QEMU is often used as the hypervisor for virtual machines running in the
+Oracle cloud. Since one of the advantages of cloud computing is the
+ability to run many VMs from different tenants in the same cloud
+infrastructure, a guest that compromised its hypervisor could
+potentially use the hypervisor's access privileges to access data it is
+not authorized for.
+
+QEMU can be susceptible to security attacks because it is a large,
+monolithic program that provides many features to the VMs it services.
+Many of these features can be configured out of QEMU, but even a reduced
+configuration QEMU has a large amount of code a guest can potentially
+attack. Separating QEMU reduces the attack surface by aiding to
+limit each component in the system to only access the resources that
+it needs to perform its job.
+
+QEMU services
+-------------
+
+QEMU can be broadly described as providing three main services. One is a
+VM control point, where VMs can be created, migrated, re-configured, and
+destroyed. A second is to emulate the CPU instructions within the VM,
+often accelerated by HW virtualization features such as Intel's VT
+extensions. Finally, it provides IO services to the VM by emulating HW
+IO devices, such as disk and network devices.
+
+A multi-process QEMU
+~~~~~~~~~~~~~~~~~~~~
+
+A multi-process QEMU involves separating QEMU services into separate
+host processes. Each of these processes can be given only the privileges
+it needs to provide its service, e.g., a disk service could be given
+access only to the disk images it provides, and not be allowed to
+access other files, or any network devices. An attacker who compromised
+this service would not be able to use this exploit to access files or
+devices beyond what the disk service was given access to.
+
+A QEMU control process would remain, but in multi-process mode, will
+have no direct interfaces to the VM. During VM execution, it would still
+provide the user interface to hot-plug devices or live migrate the VM.
+
+A first step in creating a multi-process QEMU is to separate IO services
+from the main QEMU program, which would continue to provide CPU
+emulation. i.e., the control process would also be the CPU emulation
+process. In a later phase, CPU emulation could be separated from the
+control process.
+
+Separating IO services
+----------------------
+
+Separating IO services into individual host processes is a good place to
+begin for a couple of reasons. One is the sheer number of IO devices QEMU
+can emulate provides a large surface of interfaces which could potentially
+be exploited, and, indeed, have been a source of exploits in the past.
+Another is the modular nature of QEMU device emulation code provides
+interface points where the QEMU functions that perform device emulation
+can be separated from the QEMU functions that manage the emulation of
+guest CPU instructions. The devices emulated in the separate process are
+referred to as remote devices.
+
+QEMU device emulation
+~~~~~~~~~~~~~~~~~~~~~
+
+QEMU uses an object oriented SW architecture for device emulation code.
+Configured objects are all compiled into the QEMU binary, then objects
+are instantiated by name when used by the guest VM. For example, the
+code to emulate a device named "foo" is always present in QEMU, but its
+instantiation code is only run when the device is included in the target
+VM. (e.g., via the QEMU command line as *-device foo*)
+
+The object model is hierarchical, so device emulation code names its
+parent object (such as "pci-device" for a PCI device) and QEMU will
+instantiate a parent object before calling the device's instantiation
+code.
+
+Current separation models
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+In order to separate the device emulation code from the CPU emulation
+code, the device object code must run in a different process. There are
+a couple of existing QEMU features that can run emulation code
+separately from the main QEMU process. These are examined below.
+
+vhost user model
+^^^^^^^^^^^^^^^^
+
+Virtio guest device drivers can be connected to vhost user applications
+in order to perform their IO operations. This model uses special virtio
+device drivers in the guest and vhost user device objects in QEMU, but
+once the QEMU vhost user code has configured the vhost user application,
+mission-mode IO is performed by the application. The vhost user
+application is a daemon process that can be contacted via a known UNIX
+domain socket.
+
+vhost socket
+''''''''''''
+
+As mentioned above, one of the tasks of the vhost device object within
+QEMU is to contact the vhost application and send it configuration
+information about this device instance. As part of the configuration
+process, the application can also be sent other file descriptors over
+the socket, which then can be used by the vhost user application in
+various ways, some of which are described below.
+
+vhost MMIO store acceleration
+'''''''''''''''''''''''''''''
+
+VMs are often run using HW virtualization features via the KVM kernel
+driver. This driver allows QEMU to accelerate the emulation of guest CPU
+instructions by running the guest in a virtual HW mode. When the guest
+executes instructions that cannot be executed by virtual HW mode,
+execution returns to the KVM driver so it can inform QEMU to emulate the
+instructions in SW.
+
+One of the events that can cause a return to QEMU is when a guest device
+driver accesses an IO location. QEMU then dispatches the memory
+operation to the corresponding QEMU device object. In the case of a
+vhost user device, the memory operation would need to be sent over a
+socket to the vhost application. This path is accelerated by the QEMU
+virtio code by setting up an eventfd file descriptor that the vhost
+application can directly receive MMIO store notifications from the KVM
+driver, instead of needing them to be sent to the QEMU process first.
+
+vhost interrupt acceleration
+''''''''''''''''''''''''''''
+
+Another optimization used by the vhost application is the ability to
+directly inject interrupts into the VM via the KVM driver, again,
+bypassing the need to send the interrupt back to the QEMU process first.
+The QEMU virtio setup code configures the KVM driver with an eventfd
+that triggers the device interrupt in the guest when the eventfd is
+written. This irqfd file descriptor is then passed to the vhost user
+application program.
+
+vhost access to guest memory
+''''''''''''''''''''''''''''
+
+The vhost application is also allowed to directly access guest memory,
+instead of needing to send the data as messages to QEMU. This is also
+done with file descriptors sent to the vhost user application by QEMU.
+These descriptors can be passed to ``mmap()`` by the vhost application
+to map the guest address space into the vhost application.
+
+IOMMUs introduce another level of complexity, since the address given to
+the guest virtio device to DMA to or from is not a guest physical
+address. This case is handled by having vhost code within QEMU register
+as a listener for IOMMU mapping changes. The vhost application maintains
+a cache of IOMMMU translations: sending translation requests back to
+QEMU on cache misses, and in turn receiving flush requests from QEMU
+when mappings are purged.
+
+applicability to device separation
+''''''''''''''''''''''''''''''''''
+
+Much of the vhost model can be re-used by separated device emulation. In
+particular, the ideas of using a socket between QEMU and the device
+emulation application, using a file descriptor to inject interrupts into
+the VM via KVM, and allowing the application to ``mmap()`` the guest
+should be re used.
+
+There are, however, some notable differences between how a vhost
+application works and the needs of separated device emulation. The most
+basic is that vhost uses custom virtio device drivers which always
+trigger IO with MMIO stores. A separated device emulation model must
+work with existing IO device models and guest device drivers. MMIO loads
+break vhost store acceleration since they are synchronous - guest
+progress cannot continue until the load has been emulated. By contrast,
+stores are asynchronous, the guest can continue after the store event
+has been sent to the vhost application.
+
+Another difference is that in the vhost user model, a single daemon can
+support multiple QEMU instances. This is contrary to the security regime
+desired, in which the emulation application should only be allowed to
+access the files or devices the VM it's running on behalf of can access.
+#### qemu-io model
+
+Qemu-io is a test harness used to test changes to the QEMU block backend
+object code. (e.g., the code that implements disk images for disk driver
+emulation) Qemu-io is not a device emulation application per se, but it
+does compile the QEMU block objects into a separate binary from the main
+QEMU one. This could be useful for disk device emulation, since its
+emulation applications will need to include the QEMU block objects.
+
+New separation model based on proxy objects
+-------------------------------------------
+
+A different model based on proxy objects in the QEMU program
+communicating with remote emulation programs could provide separation
+while minimizing the changes needed to the device emulation code. The
+rest of this section is a discussion of how a proxy object model would
+work.
+
+Remote emulation processes
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The remote emulation process will run the QEMU object hierarchy without
+modification. The device emulation objects will be also be based on the
+QEMU code, because for anything but the simplest device, it would not be
+a tractable to re-implement both the object model and the many device
+backends that QEMU has.
+
+The processes will communicate with the QEMU process over UNIX domain
+sockets. The processes can be executed either as standalone processes,
+or be executed by QEMU. In both cases, the host backends the emulation
+processes will provide are specified on its command line, as they would
+be for QEMU. For example:
+
+::
+
+    disk-proc -blockdev driver=file,node-name=file0,filename=disk-file0  \
+    -blockdev driver=qcow2,node-name=drive0,file=file0
+
+would indicate process *disk-proc* uses a qcow2 emulated disk named
+*file0* as its backend.
+
+Emulation processes may emulate more than one guest controller. A common
+configuration might be to put all controllers of the same device class
+(e.g., disk, network, etc.) in a single process, so that all backends of
+the same type can be managed by a single QMP monitor.
+
+communication with QEMU
+^^^^^^^^^^^^^^^^^^^^^^^
+
+The first argument to the remote emulation process will be a Unix domain
+socket that connects with the Proxy object. This is a required argument.
+
+::
+
+    disk-proc <socket number> <backend list>
+
+remote process QMP monitor
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Remote emulation processes can be monitored via QMP, similar to QEMU
+itself. The QMP monitor socket is specified the same as for a QEMU
+process:
+
+::
+
+    disk-proc -qmp unix:/tmp/disk-mon,server
+
+can be monitored over the UNIX socket path */tmp/disk-mon*.
+
+QEMU command line
+~~~~~~~~~~~~~~~~~
+
+Each remote device emulated in a remote process on the host is
+represented as a *-device* of type *pci-proxy-dev*. A socket
+sub-option to this option specifies the Unix socket that connects
+to the remote process. An *id* sub-option is required, and it should
+be the same id as used in the remote process.
+
+::
+
+    qemu-system-x86_64 ... -device pci-proxy-dev,id=lsi0,socket=3
+
+can be used to add a device emulated in a remote process
+
+
+QEMU management of remote processes
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+QEMU is not aware of the type of type of the remote PCI device. It is
+a pass through device as far as QEMU is concerned.
+
+communication with emulation process
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+primary channel
+'''''''''''''''
+
+The primary channel (referred to as com in the code) is used to bootstrap
+the remote process. It is also used to pass on device-agnostic commands
+like reset.
+
+per-device channels
+'''''''''''''''''''
+
+Each remote device communicates with QEMU using a dedicated communication
+channel. The proxy object sets up this channel using the primary
+channel during its initialization.
+
+QEMU device proxy objects
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+QEMU has an object model based on sub-classes inherited from the
+"object" super-class. The sub-classes that are of interest here are the
+"device" and "bus" sub-classes whose child sub-classes make up the
+device tree of a QEMU emulated system.
+
+The proxy object model will use device proxy objects to replace the
+device emulation code within the QEMU process. These objects will live
+in the same place in the object and bus hierarchies as the objects they
+replace. i.e., the proxy object for an LSI SCSI controller will be a
+sub-class of the "pci-device" class, and will have the same PCI bus
+parent and the same SCSI bus child objects as the LSI controller object
+it replaces.
+
+It is worth noting that the same proxy object is used to mediate with
+all types of remote PCI devices.
+
+object initialization
+^^^^^^^^^^^^^^^^^^^^^
+
+The Proxy device objects are initialized in the exact same manner in
+which any other QEMU device would be initialized.
+
+In addition, the Proxy objects perform the following two tasks:
+- Parses the "socket" sub option and connects to the remote process
+using this channel
+- Uses the "id" sub-option to connect to the emulated device on the
+separate process
+
+class\_init
+'''''''''''
+
+The ``class_init()`` method of a proxy object will, in general behave
+similarly to the object it replaces, including setting any static
+properties and methods needed by the proxy.
+
+instance\_init / realize
+''''''''''''''''''''''''
+
+The ``instance_init()`` and ``realize()`` functions would only need to
+perform tasks related to being a proxy, such are registering its own
+MMIO handlers, or creating a child bus that other proxy devices can be
+attached to later.
+
+Other tasks will be device-specific. For example, PCI device objects
+will initialize the PCI config space in order to make a valid PCI device
+tree within the QEMU process.
+
+address space registration
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Most devices are driven by guest device driver accesses to IO addresses
+or ports. The QEMU device emulation code uses QEMU's memory region
+function calls (such as ``memory_region_init_io()``) to add callback
+functions that QEMU will invoke when the guest accesses the device's
+areas of the IO address space. When a guest driver does access the
+device, the VM will exit HW virtualization mode and return to QEMU,
+which will then lookup and execute the corresponding callback function.
+
+A proxy object would need to mirror the memory region calls the actual
+device emulator would perform in its initialization code, but with its
+own callbacks. When invoked by QEMU as a result of a guest IO operation,
+they will forward the operation to the device emulation process.
+
+PCI config space
+^^^^^^^^^^^^^^^^
+
+PCI devices also have a configuration space that can be accessed by the
+guest driver. Guest accesses to this space is not handled by the device
+emulation object, but by its PCI parent object. Much of this space is
+read-only, but certain registers (especially BAR and MSI-related ones)
+need to be propagated to the emulation process.
+
+PCI parent proxy
+''''''''''''''''
+
+One way to propagate guest PCI config accesses is to create a
+"pci-device-proxy" class that can serve as the parent of a PCI device
+proxy object. This class's parent would be "pci-device" and it would
+override the PCI parent's ``config_read()`` and ``config_write()``
+methods with ones that forward these operations to the emulation
+program.
+
+interrupt receipt
+^^^^^^^^^^^^^^^^^
+
+A proxy for a device that generates interrupts will need to create a
+socket to receive interrupt indications from the emulation process. An
+incoming interrupt indication would then be sent up to its bus parent to
+be injected into the guest. For example, a PCI device object may use
+``pci_set_irq()``.
+
+live migration
+^^^^^^^^^^^^^^
+
+The proxy will register to save and restore any *vmstate* it needs over
+a live migration event. The device proxy does not need to manage the
+remote device's *vmstate*; that will be handled by the remote process
+proxy (see below).
+
+QEMU remote device operation
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Generic device operations, such as DMA, will be performed by the remote
+process proxy by sending messages to the remote process.
+
+DMA operations
+^^^^^^^^^^^^^^
+
+DMA operations would be handled much like vhost applications do. One of
+the initial messages sent to the emulation process is a guest memory
+table. Each entry in this table consists of a file descriptor and size
+that the emulation process can ``mmap()`` to directly access guest
+memory, similar to ``vhost_user_set_mem_table()``. Note guest memory
+must be backed by file descriptors, such as when QEMU is given the
+*-mem-path* command line option.
+
+IOMMU operations
+^^^^^^^^^^^^^^^^
+
+When the emulated system includes an IOMMU, the remote process proxy in
+QEMU will need to create a socket for IOMMU requests from the emulation
+process. It will handle those requests with an
+``address_space_get_iotlb_entry()`` call. In order to handle IOMMU
+unmaps, the remote process proxy will also register as a listener on the
+device's DMA address space. When an IOMMU memory region is created
+within the DMA address space, an IOMMU notifier for unmaps will be added
+to the memory region that will forward unmaps to the emulation process
+over the IOMMU socket.
+
+device hot-plug via QMP
+^^^^^^^^^^^^^^^^^^^^^^^
+
+An QMP "device\_add" command can add a device emulated by a remote
+process. It will also have "rid" option to the command, just as the
+*-device* command line option does. The remote process may either be one
+started at QEMU startup, or be one added by the "add-process" QMP
+command described above. In either case, the remote process proxy will
+forward the new device's JSON description to the corresponding emulation
+process.
+
+live migration
+^^^^^^^^^^^^^^
+
+The remote process proxy will also register for live migration
+notifications with ``vmstate_register()``. When called to save state,
+the proxy will send the remote process a secondary socket file
+descriptor to save the remote process's device *vmstate* over. The
+incoming byte stream length and data will be saved as the proxy's
+*vmstate*. When the proxy is resumed on its new host, this *vmstate*
+will be extracted, and a secondary socket file descriptor will be sent
+to the new remote process through which it receives the *vmstate* in
+order to restore the devices there.
+
+device emulation in remote process
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The parts of QEMU that the emulation program will need include the
+object model; the memory emulation objects; the device emulation objects
+of the targeted device, and any dependent devices; and, the device's
+backends. It will also need code to setup the machine environment,
+handle requests from the QEMU process, and route machine-level requests
+(such as interrupts or IOMMU mappings) back to the QEMU process.
+
+initialization
+^^^^^^^^^^^^^^
+
+The process initialization sequence will follow the same sequence
+followed by QEMU. It will first initialize the backend objects, then
+device emulation objects. The JSON descriptions sent by the QEMU process
+will drive which objects need to be created.
+
+-  address spaces
+
+Before the device objects are created, the initial address spaces and
+memory regions must be configured with ``memory_map_init()``. This
+creates a RAM memory region object (*system\_memory*) and an IO memory
+region object (*system\_io*).
+
+-  RAM
+
+RAM memory region creation will follow how ``pc_memory_init()`` creates
+them, but must use ``memory_region_init_ram_from_fd()`` instead of
+``memory_region_allocate_system_memory()``. The file descriptors needed
+will be supplied by the guest memory table from above. Those RAM regions
+would then be added to the *system\_memory* memory region with
+``memory_region_add_subregion()``.
+
+-  PCI
+
+IO initialization will be driven by the JSON descriptions sent from the
+QEMU process. For a PCI device, a PCI bus will need to be created with
+``pci_root_bus_new()``, and a PCI memory region will need to be created
+and added to the *system\_memory* memory region with
+``memory_region_add_subregion_overlap()``. The overlap version is
+required for architectures where PCI memory overlaps with RAM memory.
+
+MMIO handling
+^^^^^^^^^^^^^
+
+The device emulation objects will use ``memory_region_init_io()`` to
+install their MMIO handlers, and ``pci_register_bar()`` to associate
+those handlers with a PCI BAR, as they do within QEMU currently.
+
+In order to use ``address_space_rw()`` in the emulation process to
+handle MMIO requests from QEMU, the PCI physical addresses must be the
+same in the QEMU process and the device emulation process. In order to
+accomplish that, guest BAR programming must also be forwarded from QEMU
+to the emulation process.
+
+interrupt injection
+^^^^^^^^^^^^^^^^^^^
+
+When device emulation wants to inject an interrupt into the VM, the
+request climbs the device's bus object hierarchy until the point where a
+bus object knows how to signal the interrupt to the guest. The details
+depend on the type of interrupt being raised.
+
+-  PCI pin interrupts
+
+On x86 systems, there is an emulated IOAPIC object attached to the root
+PCI bus object, and the root PCI object forwards interrupt requests to
+it. The IOAPIC object, in turn, calls the KVM driver to inject the
+corresponding interrupt into the VM. The simplest way to handle this in
+an emulation process would be to setup the root PCI bus driver (via
+``pci_bus_irqs()``) to send a interrupt request back to the QEMU
+process, and have the device proxy object reflect it up the PCI tree
+there.
+
+-  PCI MSI/X interrupts
+
+PCI MSI/X interrupts are implemented in HW as DMA writes to a
+CPU-specific PCI address. In QEMU on x86, a KVM APIC object receives
+these DMA writes, then calls into the KVM driver to inject the interrupt
+into the VM. A simple emulation process implementation would be to send
+the MSI DMA address from QEMU as a message at initialization, then
+install an address space handler at that address which forwards the MSI
+message back to QEMU.
+
+DMA operations
+^^^^^^^^^^^^^^
+
+When a emulation object wants to DMA into or out of guest memory, it
+first must use dma\_memory\_map() to convert the DMA address to a local
+virtual address. The emulation process memory region objects setup above
+will be used to translate the DMA address to a local virtual address the
+device emulation code can access.
+
+IOMMU
+^^^^^
+
+When an IOMMU is in use in QEMU, DMA translation uses IOMMU memory
+regions to translate the DMA address to a guest physical address before
+that physical address can be translated to a local virtual address. The
+emulation process will need similar functionality.
+
+-  IOTLB cache
+
+The emulation process will maintain a cache of recent IOMMU translations
+(the IOTLB). When the translate() callback of an IOMMU memory region is
+invoked, the IOTLB cache will be searched for an entry that will map the
+DMA address to a guest PA. On a cache miss, a message will be sent back
+to QEMU requesting the corresponding translation entry, which be both be
+used to return a guest address and be added to the cache.
+
+-  IOTLB purge
+
+The IOMMU emulation will also need to act on unmap requests from QEMU.
+These happen when the guest IOMMU driver purges an entry from the
+guest's translation table.
+
+live migration
+^^^^^^^^^^^^^^
+
+When a remote process receives a live migration indication from QEMU, it
+will set up a channel using the received file descriptor with
+``qio_channel_socket_new_fd()``. This channel will be used to create a
+*QEMUfile* that can be passed to ``qemu_save_device_state()`` to send
+the process's device state back to QEMU. This method will be reversed on
+restore - the channel will be passed to ``qemu_loadvm_state()`` to
+restore the device state.
+
+Accelerating device emulation
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The messages that are required to be sent between QEMU and the emulation
+process can add considerable latency to IO operations. The optimizations
+described below attempt to ameliorate this effect by allowing the
+emulation process to communicate directly with the kernel KVM driver.
+The KVM file descriptors created would be passed to the emulation process
+via initialization messages, much like the guest memory table is done.
+#### MMIO acceleration
+
+Vhost user applications can receive guest virtio driver stores directly
+from KVM. The issue with the eventfd mechanism used by vhost user is
+that it does not pass any data with the event indication, so it cannot
+handle guest loads or guest stores that carry store data. This concept
+could, however, be expanded to cover more cases.
+
+The expanded idea would require a new type of KVM device:
+*KVM\_DEV\_TYPE\_USER*. This device has two file descriptors: a master
+descriptor that QEMU can use for configuration, and a slave descriptor
+that the emulation process can use to receive MMIO notifications. QEMU
+would create both descriptors using the KVM driver, and pass the slave
+descriptor to the emulation process via an initialization message.
+
+data structures
+^^^^^^^^^^^^^^^
+
+-  guest physical range
+
+The guest physical range structure describes the address range that a
+device will respond to. It includes the base and length of the range, as
+well as which bus the range resides on (e.g., on an x86machine, it can
+specify whether the range refers to memory or IO addresses).
+
+A device can have multiple physical address ranges it responds to (e.g.,
+a PCI device can have multiple BARs), so the structure will also include
+an enumerated identifier to specify which of the device's ranges is
+being referred to.
+
++--------+----------------------------+
+| Name   | Description                |
++========+============================+
+| addr   | range base address         |
++--------+----------------------------+
+| len    | range length               |
++--------+----------------------------+
+| bus    | addr type (memory or IO)   |
++--------+----------------------------+
+| id     | range ID (e.g., PCI BAR)   |
++--------+----------------------------+
+
+-  MMIO request structure
+
+This structure describes an MMIO operation. It includes which guest
+physical range the MMIO was within, the offset within that range, the
+MMIO type (e.g., load or store), and its length and data. It also
+includes a sequence number that can be used to reply to the MMIO, and
+the CPU that issued the MMIO.
+
++----------+------------------------+
+| Name     | Description            |
++==========+========================+
+| rid      | range MMIO is within   |
++----------+------------------------+
+| offset   | offset withing *rid*   |
++----------+------------------------+
+| type     | e.g., load or store    |
++----------+------------------------+
+| len      | MMIO length            |
++----------+------------------------+
+| data     | store data             |
++----------+------------------------+
+| seq      | sequence ID            |
++----------+------------------------+
+
+-  MMIO request queues
+
+MMIO request queues are FIFO arrays of MMIO request structures. There
+are two queues: pending queue is for MMIOs that haven't been read by the
+emulation program, and the sent queue is for MMIOs that haven't been
+acknowledged. The main use of the second queue is to validate MMIO
+replies from the emulation program.
+
+-  scoreboard
+
+Each CPU in the VM is emulated in QEMU by a separate thread, so multiple
+MMIOs may be waiting to be consumed by an emulation program and multiple
+threads may be waiting for MMIO replies. The scoreboard would contain a
+wait queue and sequence number for the per-CPU threads, allowing them to
+be individually woken when the MMIO reply is received from the emulation
+program. It also tracks the number of posted MMIO stores to the device
+that haven't been replied to, in order to satisfy the PCI constraint
+that a load to a device will not complete until all previous stores to
+that device have been completed.
+
+-  device shadow memory
+
+Some MMIO loads do not have device side-effects. These MMIOs can be
+completed without sending a MMIO request to the emulation program if the
+emulation program shares a shadow image of the device's memory image
+with the KVM driver.
+
+The emulation program will ask the KVM driver to allocate memory for the
+shadow image, and will then use ``mmap()`` to directly access it. The
+emulation program can control KVM access to the shadow image by sending
+KVM an access map telling it which areas of the image have no
+side-effects (and can be completed immediately), and which require a
+MMIO request to the emulation program. The access map can also inform
+the KVM drive which size accesses are allowed to the image.
+
+master descriptor
+^^^^^^^^^^^^^^^^^
+
+The master descriptor is used by QEMU to configure the new KVM device.
+The descriptor would be returned by the KVM driver when QEMU issues a
+*KVM\_CREATE\_DEVICE* ``ioctl()`` with a *KVM\_DEV\_TYPE\_USER* type.
+
+KVM\_DEV\_TYPE\_USER device ops
+
+
+The *KVM\_DEV\_TYPE\_USER* operations vector will be registered by a
+``kvm_register_device_ops()`` call when the KVM system in initialized by
+``kvm_init()``. These device ops are called by the KVM driver when QEMU
+executes certain ``ioctl()`` operations on its KVM file descriptor. They
+include:
+
+-  create
+
+This routine is called when QEMU issues a *KVM\_CREATE\_DEVICE*
+``ioctl()`` on its per-VM file descriptor. It will allocate and
+initialize a KVM user device specific data structure, and assign the
+*kvm\_device* private field to it.
+
+-  ioctl
+
+This routine is invoked when QEMU issues an ``ioctl()`` on the master
+descriptor. The ``ioctl()`` commands supported are defined by the KVM
+device type. *KVM\_DEV\_TYPE\_USER* ones will need several commands:
+
+*KVM\_DEV\_USER\_SLAVE\_FD* creates the slave file descriptor that will
+be passed to the device emulation program. Only one slave can be created
+by each master descriptor. The file operations performed by this
+descriptor are described below.
+
+The *KVM\_DEV\_USER\_PA\_RANGE* command configures a guest physical
+address range that the slave descriptor will receive MMIO notifications
+for. The range is specified by a guest physical range structure
+argument. For buses that assign addresses to devices dynamically, this
+command can be executed while the guest is running, such as the case
+when a guest changes a device's PCI BAR registers.
+
+*KVM\_DEV\_USER\_PA\_RANGE* will use ``kvm_io_bus_register_dev()`` to
+register *kvm\_io\_device\_ops* callbacks to be invoked when the guest
+performs a MMIO operation within the range. When a range is changed,
+``kvm_io_bus_unregister_dev()`` is used to remove the previous
+instantiation.
+
+*KVM\_DEV\_USER\_TIMEOUT* will configure a timeout value that specifies
+how long KVM will wait for the emulation process to respond to a MMIO
+indication.
+
+-  destroy
+
+This routine is called when the VM instance is destroyed. It will need
+to destroy the slave descriptor; and free any memory allocated by the
+driver, as well as the *kvm\_device* structure itself.
+
+slave descriptor
+^^^^^^^^^^^^^^^^
+
+The slave descriptor will have its own file operations vector, which
+responds to system calls on the descriptor performed by the device
+emulation program.
+
+-  read
+
+A read returns any pending MMIO requests from the KVM driver as MMIO
+request structures. Multiple structures can be returned if there are
+multiple MMIO operations pending. The MMIO requests are moved from the
+pending queue to the sent queue, and if there are threads waiting for
+space in the pending to add new MMIO operations, they will be woken
+here.
+
+-  write
+
+A write also consists of a set of MMIO requests. They are compared to
+the MMIO requests in the sent queue. Matches are removed from the sent
+queue, and any threads waiting for the reply are woken. If a store is
+removed, then the number of posted stores in the per-CPU scoreboard is
+decremented. When the number is zero, and a non side-effect load was
+waiting for posted stores to complete, the load is continued.
+
+-  ioctl
+
+There are several ioctl()s that can be performed on the slave
+descriptor.
+
+A *KVM\_DEV\_USER\_SHADOW\_SIZE* ``ioctl()`` causes the KVM driver to
+allocate memory for the shadow image. This memory can later be
+``mmap()``\ ed by the emulation process to share the emulation's view of
+device memory with the KVM driver.
+
+A *KVM\_DEV\_USER\_SHADOW\_CTRL* ``ioctl()`` controls access to the
+shadow image. It will send the KVM driver a shadow control map, which
+specifies which areas of the image can complete guest loads without
+sending the load request to the emulation program. It will also specify
+the size of load operations that are allowed.
+
+-  poll
+
+An emulation program will use the ``poll()`` call with a *POLLIN* flag
+to determine if there are MMIO requests waiting to be read. It will
+return if the pending MMIO request queue is not empty.
+
+-  mmap
+
+This call allows the emulation program to directly access the shadow
+image allocated by the KVM driver. As device emulation updates device
+memory, changes with no side-effects will be reflected in the shadow,
+and the KVM driver can satisfy guest loads from the shadow image without
+needing to wait for the emulation program.
+
+kvm\_io\_device ops
+^^^^^^^^^^^^^^^^^^^
+
+Each KVM per-CPU thread can handle MMIO operation on behalf of the guest
+VM. KVM will use the MMIO's guest physical address to search for a
+matching *kvm\_io\_device* to see if the MMIO can be handled by the KVM
+driver instead of exiting back to QEMU. If a match is found, the
+corresponding callback will be invoked.
+
+-  read
+
+This callback is invoked when the guest performs a load to the device.
+Loads with side-effects must be handled synchronously, with the KVM
+driver putting the QEMU thread to sleep waiting for the emulation
+process reply before re-starting the guest. Loads that do not have
+side-effects may be optimized by satisfying them from the shadow image,
+if there are no outstanding stores to the device by this CPU. PCI memory
+ordering demands that a load cannot complete before all older stores to
+the same device have been completed.
+
+-  write
+
+Stores can be handled asynchronously unless the pending MMIO request
+queue is full. In this case, the QEMU thread must sleep waiting for
+space in the queue. Stores will increment the number of posted stores in
+the per-CPU scoreboard, in order to implement the PCI ordering
+constraint above.
+
+interrupt acceleration
+^^^^^^^^^^^^^^^^^^^^^^
+
+This performance optimization would work much like a vhost user
+application does, where the QEMU process sets up *eventfds* that cause
+the device's corresponding interrupt to be triggered by the KVM driver.
+These irq file descriptors are sent to the emulation process at
+initialization, and are used when the emulation code raises a device
+interrupt.
+
+intx acceleration
+'''''''''''''''''
+
+Traditional PCI pin interrupts are level based, so, in addition to an
+irq file descriptor, a re-sampling file descriptor needs to be sent to
+the emulation program. This second file descriptor allows multiple
+devices sharing an irq to be notified when the interrupt has been
+acknowledged by the guest, so they can re-trigger the interrupt if their
+device has not de-asserted its interrupt.
+
+intx irq descriptor
+
+
+The irq descriptors are created by the proxy object
+``using event_notifier_init()`` to create the irq and re-sampling
+*eventds*, and ``kvm_vm_ioctl(KVM_IRQFD)`` to bind them to an interrupt.
+The interrupt route can be found with
+``pci_device_route_intx_to_irq()``.
+
+intx routing changes
+
+
+Intx routing can be changed when the guest programs the APIC the device
+pin is connected to. The proxy object in QEMU will use
+``pci_device_set_intx_routing_notifier()`` to be informed of any guest
+changes to the route. This handler will broadly follow the VFIO
+interrupt logic to change the route: de-assigning the existing irq
+descriptor from its route, then assigning it the new route. (see
+``vfio_intx_update()``)
+
+MSI/X acceleration
+''''''''''''''''''
+
+MSI/X interrupts are sent as DMA transactions to the host. The interrupt
+data contains a vector that is programmed by the guest, A device may have
+multiple MSI interrupts associated with it, so multiple irq descriptors
+may need to be sent to the emulation program.
+
+MSI/X irq descriptor
+
+
+This case will also follow the VFIO example. For each MSI/X interrupt,
+an *eventfd* is created, a virtual interrupt is allocated by
+``kvm_irqchip_add_msi_route()``, and the virtual interrupt is bound to
+the eventfd with ``kvm_irqchip_add_irqfd_notifier()``.
+
+MSI/X config space changes
+
+
+The guest may dynamically update several MSI-related tables in the
+device's PCI config space. These include per-MSI interrupt enables and
+vector data. Additionally, MSIX tables exist in device memory space, not
+config space. Much like the BAR case above, the proxy object must look
+at guest config space programming to keep the MSI interrupt state
+consistent between QEMU and the emulation program.
+
+--------------
+
+Disaggregated CPU emulation
+---------------------------
+
+After IO services have been disaggregated, a second phase would be to
+separate a process to handle CPU instruction emulation from the main
+QEMU control function. There are no object separation points for this
+code, so the first task would be to create one.
+
+Host access controls
+--------------------
+
+Separating QEMU relies on the host OS's access restriction mechanisms to
+enforce that the differing processes can only access the objects they
+are entitled to. There are a couple types of mechanisms usually provided
+by general purpose OSs.
+
+Discretionary access control
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Discretionary access control allows each user to control who can access
+their files. In Linux, this type of control is usually too coarse for
+QEMU separation, since it only provides three separate access controls:
+one for the same user ID, the second for users IDs with the same group
+ID, and the third for all other user IDs. Each device instance would
+need a separate user ID to provide access control, which is likely to be
+unwieldy for dynamically created VMs.
+
+Mandatory access control
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+Mandatory access control allows the OS to add an additional set of
+controls on top of discretionary access for the OS to control. It also
+adds other attributes to processes and files such as types, roles, and
+categories, and can establish rules for how processes and files can
+interact.
+
+Type enforcement
+^^^^^^^^^^^^^^^^
+
+Type enforcement assigns a *type* attribute to processes and files, and
+allows rules to be written on what operations a process with a given
+type can perform on a file with a given type. QEMU separation could take
+advantage of type enforcement by running the emulation processes with
+different types, both from the main QEMU process, and from the emulation
+processes of different classes of devices.
+
+For example, guest disk images and disk emulation processes could have
+types separate from the main QEMU process and non-disk emulation
+processes, and the type rules could prevent processes other than disk
+emulation ones from accessing guest disk images. Similarly, network
+emulation processes can have a type separate from the main QEMU process
+and non-network emulation process, and only that type can access the
+host tun/tap device used to provide guest networking.
+
+Category enforcement
+^^^^^^^^^^^^^^^^^^^^
+
+Category enforcement assigns a set of numbers within a given range to
+the process or file. The process is granted access to the file if the
+process's set is a superset of the file's set. This enforcement can be
+used to separate multiple instances of devices in the same class.
+
+For example, if there are multiple disk devices provides to a guest,
+each device emulation process could be provisioned with a separate
+category. The different device emulation processes would not be able to
+access each other's backing disk images.
+
+Alternatively, categories could be used in lieu of the type enforcement
+scheme described above. In this scenario, different categories would be
+used to prevent device emulation processes in different classes from
+accessing resources assigned to other classes.
-- 
2.29.2

From: Elena Ufimtseva <elena.ufimtseva@oracle.com>

Adds documentation explaining the command-line arguments needed
to use multi-process.

[Move orphan docs/multi-process.rst document into docs/system/ and add
it to index.rst to prevent Sphinx "document isn't included in any
toctree" error.
--Stefan]

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 MAINTAINERS                   |  1 +
 docs/system/index.rst         |  1 +
 docs/system/multi-process.rst | 64 +++++++++++++++++++++++++++++++++++
 3 files changed, 66 insertions(+)
 create mode 100644 docs/system/multi-process.rst

diff --git a/MAINTAINERS b/MAINTAINERS
index XXXXXXX..XXXXXXX 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -XXX,XX +XXX,XX @@ M: Jagannathan Raman <jag.raman@oracle.com>
 M: John G Johnson <john.g.johnson@oracle.com>
 S: Maintained
 F: docs/devel/multi-process.rst
+F: docs/system/multi-process.rst
 
 Build and test automation
 -------------------------
diff --git a/docs/system/index.rst b/docs/system/index.rst
index XXXXXXX..XXXXXXX 100644
--- a/docs/system/index.rst
+++ b/docs/system/index.rst
@@ -XXX,XX +XXX,XX @@ Contents:
    pr-manager
    targets
    security
+   multi-process
    deprecated
    removed-features
    build-platforms
diff --git a/docs/system/multi-process.rst b/docs/system/multi-process.rst
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/docs/system/multi-process.rst
@@ -XXX,XX +XXX,XX @@
+Multi-process QEMU
+==================
+
+This document describes how to configure and use multi-process qemu.
+For the design document refer to docs/devel/qemu-multiprocess.
+
+1) Configuration
+----------------
+
+multi-process is enabled by default for targets that enable KVM
+
+
+2) Usage
+--------
+
+Multi-process QEMU requires an orchestrator to launch.
+
+Following is a description of command-line used to launch mpqemu.
+
+* Orchestrator:
+
+  - The Orchestrator creates a unix socketpair
+
+  - It launches the remote process and passes one of the
+    sockets to it via command-line.
+
+  - It then launches QEMU and specifies the other socket as an option
+    to the Proxy device object
+
+* Remote Process:
+
+  - QEMU can enter remote process mode by using the "remote" machine
+    option.
+
+  - The orchestrator creates a "remote-object" with details about
+    the device and the file descriptor for the device
+
+  - The remaining options are no different from how one launches QEMU with
+    devices.
+
+  - Example command-line for the remote process is as follows:
+
+      /usr/bin/qemu-system-x86_64                                        \
+      -machine x-remote                                                  \
+      -device lsi53c895a,id=lsi0                                         \
+      -drive id=drive_image2,file=/build/ol7-nvme-test-1.qcow2           \
+      -device scsi-hd,id=drive2,drive=drive_image2,bus=lsi0.0,scsi-id=0  \
+      -object x-remote-object,id=robj1,devid=lsi1,fd=4,
+
+* QEMU:
+
+  - Since parts of the RAM are shared between QEMU & remote process, a
+    memory-backend-memfd is required to facilitate this, as follows:
+
+    -object memory-backend-memfd,id=mem,size=2G
+
+  - A "x-pci-proxy-dev" device is created for each of the PCI devices emulated
+    in the remote process. A "socket" sub-option specifies the other end of
+    unix channel created by orchestrator. The "id" sub-option must be specified
+    and should be the same as the "id" specified for the remote PCI device
+
+  - Example commandline for QEMU is as follows:
+
+      -device x-pci-proxy-dev,id=lsi0,socket=3
-- 
2.29.2

From: Jagannathan Raman <jag.raman@oracle.com>

Allow RAM MemoryRegion to be created from an offset in a file, instead
of allocating at offset of 0 by default. This is needed to synchronize
RAM between QEMU & remote process.

Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 609996697ad8617e3b01df38accc5c208c24d74e.1611938319.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 include/exec/memory.h     |  2 ++
 include/exec/ram_addr.h   |  4 ++--
 include/qemu/mmap-alloc.h |  4 +++-
 backends/hostmem-memfd.c  |  2 +-
 hw/misc/ivshmem.c         |  3 ++-
 softmmu/memory.c          |  3 ++-
 softmmu/physmem.c         | 12 +++++++-----
 util/mmap-alloc.c         |  8 +++++---
 util/oslib-posix.c        |  2 +-
 9 files changed, 25 insertions(+), 15 deletions(-)

diff --git a/include/exec/memory.h b/include/exec/memory.h
index XXXXXXX..XXXXXXX 100644
--- a/include/exec/memory.h
+++ b/include/exec/memory.h
@@ -XXX,XX +XXX,XX @@ void memory_region_init_ram_from_file(MemoryRegion *mr,
  * @size: size of the region.
  * @share: %true if memory must be mmaped with the MAP_SHARED flag
  * @fd: the fd to mmap.
+ * @offset: offset within the file referenced by fd
  * @errp: pointer to Error*, to store an error if it happens.
  *
  * Note that this function does not do anything to cause the data in the
@@ -XXX,XX +XXX,XX @@ void memory_region_init_ram_from_fd(MemoryRegion *mr,
                                     uint64_t size,
                                     bool share,
                                     int fd,
+                                    ram_addr_t offset,
                                     Error **errp);
 #endif
 
diff --git a/include/exec/ram_addr.h b/include/exec/ram_addr.h
index XXXXXXX..XXXXXXX 100644
--- a/include/exec/ram_addr.h
+++ b/include/exec/ram_addr.h
@@ -XXX,XX +XXX,XX @@ RAMBlock *qemu_ram_alloc_from_file(ram_addr_t size, MemoryRegion *mr,
                                    uint32_t ram_flags, const char *mem_path,
                                    bool readonly, Error **errp);
 RAMBlock *qemu_ram_alloc_from_fd(ram_addr_t size, MemoryRegion *mr,
-                                 uint32_t ram_flags, int fd, bool readonly,
-                                 Error **errp);
+                                 uint32_t ram_flags, int fd, off_t offset,
+                                 bool readonly, Error **errp);
 
 RAMBlock *qemu_ram_alloc_from_ptr(ram_addr_t size, void *host,
                                   MemoryRegion *mr, Error **errp);
diff --git a/include/qemu/mmap-alloc.h b/include/qemu/mmap-alloc.h
index XXXXXXX..XXXXXXX 100644
--- a/include/qemu/mmap-alloc.h
+++ b/include/qemu/mmap-alloc.h
@@ -XXX,XX +XXX,XX @@ size_t qemu_mempath_getpagesize(const char *mem_path);
  *  @readonly: true for a read-only mapping, false for read/write.
  *  @shared: map has RAM_SHARED flag.
  *  @is_pmem: map has RAM_PMEM flag.
+ *  @map_offset: map starts at offset of map_offset from the start of fd
  *
  * Return:
  *  On success, return a pointer to the mapped area.
@@ -XXX,XX +XXX,XX @@ void *qemu_ram_mmap(int fd,
                     size_t align,
                     bool readonly,
                     bool shared,
-                    bool is_pmem);
+                    bool is_pmem,
+                    off_t map_offset);
 
 void qemu_ram_munmap(int fd, void *ptr, size_t size);
 
diff --git a/backends/hostmem-memfd.c b/backends/hostmem-memfd.c
index XXXXXXX..XXXXXXX 100644
--- a/backends/hostmem-memfd.c
+++ b/backends/hostmem-memfd.c
@@ -XXX,XX +XXX,XX @@ memfd_backend_memory_alloc(HostMemoryBackend *backend, Error **errp)
     name = host_memory_backend_get_name(backend);
     memory_region_init_ram_from_fd(&backend->mr, OBJECT(backend),
                                    name, backend->size,
-                                   backend->share, fd, errp);
+                                   backend->share, fd, 0, errp);
     g_free(name);
 }
 
diff --git a/hw/misc/ivshmem.c b/hw/misc/ivshmem.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/misc/ivshmem.c
+++ b/hw/misc/ivshmem.c
@@ -XXX,XX +XXX,XX @@ static void process_msg_shmem(IVShmemState *s, int fd, Error **errp)
 
     /* mmap the region and map into the BAR2 */
     memory_region_init_ram_from_fd(&s->server_bar2, OBJECT(s),
-                                   "ivshmem.bar2", size, true, fd, &local_err);
+                                   "ivshmem.bar2", size, true, fd, 0,
+                                   &local_err);
     if (local_err) {
         error_propagate(errp, local_err);
         return;
diff --git a/softmmu/memory.c b/softmmu/memory.c
index XXXXXXX..XXXXXXX 100644
--- a/softmmu/memory.c
+++ b/softmmu/memory.c
@@ -XXX,XX +XXX,XX @@ void memory_region_init_ram_from_fd(MemoryRegion *mr,
                                     uint64_t size,
                                     bool share,
                                     int fd,
+                                    ram_addr_t offset,
                                     Error **errp)
 {
     Error *err = NULL;
@@ -XXX,XX +XXX,XX @@ void memory_region_init_ram_from_fd(MemoryRegion *mr,
     mr->destructor = memory_region_destructor_ram;
     mr->ram_block = qemu_ram_alloc_from_fd(size, mr,
                                            share ? RAM_SHARED : 0,
-                                           fd, false, &err);
+                                           fd, offset, false, &err);
     if (err) {
         mr->size = int128_zero();
         object_unparent(OBJECT(mr));
diff --git a/softmmu/physmem.c b/softmmu/physmem.c
index XXXXXXX..XXXXXXX 100644
--- a/softmmu/physmem.c
+++ b/softmmu/physmem.c
@@ -XXX,XX +XXX,XX @@ static void *file_ram_alloc(RAMBlock *block,
                             int fd,
                             bool readonly,
                             bool truncate,
+                            off_t offset,
                             Error **errp)
 {
     void *area;
@@ -XXX,XX +XXX,XX @@ static void *file_ram_alloc(RAMBlock *block,
     }
 
     area = qemu_ram_mmap(fd, memory, block->mr->align, readonly,
-                         block->flags & RAM_SHARED, block->flags & RAM_PMEM);
+                         block->flags & RAM_SHARED, block->flags & RAM_PMEM,
+                         offset);
     if (area == MAP_FAILED) {
         error_setg_errno(errp, errno,
                          "unable to map backing store for guest RAM");
@@ -XXX,XX +XXX,XX @@ static void ram_block_add(RAMBlock *new_block, Error **errp, bool shared)
 
 #ifdef CONFIG_POSIX
 RAMBlock *qemu_ram_alloc_from_fd(ram_addr_t size, MemoryRegion *mr,
-                                 uint32_t ram_flags, int fd, bool readonly,
-                                 Error **errp)
+                                 uint32_t ram_flags, int fd, off_t offset,
+                                 bool readonly, Error **errp)
 {
     RAMBlock *new_block;
     Error *local_err = NULL;
@@ -XXX,XX +XXX,XX @@ RAMBlock *qemu_ram_alloc_from_fd(ram_addr_t size, MemoryRegion *mr,
     new_block->max_length = size;
     new_block->flags = ram_flags;
     new_block->host = file_ram_alloc(new_block, size, fd, readonly,
-                                     !file_size, errp);
+                                     !file_size, offset, errp);
     if (!new_block->host) {
         g_free(new_block);
         return NULL;
@@ -XXX,XX +XXX,XX @@ RAMBlock *qemu_ram_alloc_from_file(ram_addr_t size, MemoryRegion *mr,
         return NULL;
     }
 
-    block = qemu_ram_alloc_from_fd(size, mr, ram_flags, fd, readonly, errp);
+    block = qemu_ram_alloc_from_fd(size, mr, ram_flags, fd, 0, readonly, errp);
     if (!block) {
         if (created) {
             unlink(mem_path);
diff --git a/util/mmap-alloc.c b/util/mmap-alloc.c
index XXXXXXX..XXXXXXX 100644
--- a/util/mmap-alloc.c
+++ b/util/mmap-alloc.c
@@ -XXX,XX +XXX,XX @@ void *qemu_ram_mmap(int fd,
                     size_t align,
                     bool readonly,
                     bool shared,
-                    bool is_pmem)
+                    bool is_pmem,
+                    off_t map_offset)
 {
     int prot;
     int flags;
@@ -XXX,XX +XXX,XX @@ void *qemu_ram_mmap(int fd,
 
     prot = PROT_READ | (readonly ? 0 : PROT_WRITE);
 
-    ptr = mmap(guardptr + offset, size, prot, flags | map_sync_flags, fd, 0);
+    ptr = mmap(guardptr + offset, size, prot,
+               flags | map_sync_flags, fd, map_offset);
 
     if (ptr == MAP_FAILED && map_sync_flags) {
         if (errno == ENOTSUP) {
@@ -XXX,XX +XXX,XX @@ void *qemu_ram_mmap(int fd,
          * if map failed with MAP_SHARED_VALIDATE | MAP_SYNC,
          * we will remove these flags to handle compatibility.
          */
-        ptr = mmap(guardptr + offset, size, prot, flags, fd, 0);
+        ptr = mmap(guardptr + offset, size, prot, flags, fd, map_offset);
     }
 
     if (ptr == MAP_FAILED) {
diff --git a/util/oslib-posix.c b/util/oslib-posix.c
index XXXXXXX..XXXXXXX 100644
--- a/util/oslib-posix.c
+++ b/util/oslib-posix.c
@@ -XXX,XX +XXX,XX @@ void *qemu_memalign(size_t alignment, size_t size)
 void *qemu_anon_ram_alloc(size_t size, uint64_t *alignment, bool shared)
 {
     size_t align = QEMU_VMALLOC_ALIGN;
-    void *ptr = qemu_ram_mmap(-1, size, align, false, shared, false);
+    void *ptr = qemu_ram_mmap(-1, size, align, false, shared, false, 0);
 
     if (ptr == MAP_FAILED) {
         return NULL;
-- 
2.29.2

From: Jagannathan Raman <jag.raman@oracle.com>

Add configuration options to enable or disable multiprocess QEMU code

diff --git a/configure b/configure
index XXXXXXX..XXXXXXX 100755
--- a/configure
+++ b/configure
@@ -XXX,XX +XXX,XX @@ skip_meson=no
 gettext="auto"
 fuse="auto"
 fuse_lseek="auto"
+multiprocess="no"
 
 malloc_trim="auto"
 
@@ -XXX,XX +XXX,XX @@ Linux)
   linux="yes"
   linux_user="yes"
   vhost_user=${default_feature:-yes}
+  multiprocess=${default_feature:-yes}
 ;;
 esac
 
@@ -XXX,XX +XXX,XX @@ for opt do
   ;;
   --disable-fuse-lseek) fuse_lseek="disabled"
   ;;
+  --enable-multiprocess) multiprocess="yes"
+  ;;
+  --disable-multiprocess) multiprocess="no"
+  ;;
   *)
       echo "ERROR: unknown option $opt"
       echo "Try '$0 --help' for more information"
@@ -XXX,XX +XXX,XX @@ disabled with --disable-FEATURE, default is enabled if available
   libdaxctl       libdaxctl support
   fuse            FUSE block device export
   fuse-lseek      SEEK_HOLE/SEEK_DATA support for FUSE exports
+  multiprocess    Multiprocess QEMU support
 
 NOTE: The object files are built at the place where configure is launched
 EOF
@@ -XXX,XX +XXX,XX @@ fi
 if test "$have_mlockall" = "yes" ; then
   echo "HAVE_MLOCKALL=y" >> $config_host_mak
 fi
+if test "$multiprocess" = "yes" ; then
+  echo "CONFIG_MULTIPROCESS_ALLOWED=y" >> $config_host_mak
+fi
 if test "$fuzzing" = "yes" ; then
   # If LIB_FUZZING_ENGINE is set, assume we are running on OSS-Fuzz, and the
   # needed CFLAGS have already been provided
diff --git a/meson.build b/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/meson.build
+++ b/meson.build
@@ -XXX,XX +XXX,XX @@ host_kconfig = \
   ('CONFIG_VHOST_KERNEL' in config_host ? ['CONFIG_VHOST_KERNEL=y'] : []) + \
   (have_virtfs ? ['CONFIG_VIRTFS=y'] : []) + \
   ('CONFIG_LINUX' in config_host ? ['CONFIG_LINUX=y'] : []) + \
-  ('CONFIG_PVRDMA' in config_host ? ['CONFIG_PVRDMA=y'] : [])
+  ('CONFIG_PVRDMA' in config_host ? ['CONFIG_PVRDMA=y'] : []) + \
+  ('CONFIG_MULTIPROCESS_ALLOWED' in config_host ? ['CONFIG_MULTIPROCESS_ALLOWED=y'] : [])
 
 ignored = [ 'TARGET_XML_FILES', 'TARGET_ABI_DIR', 'TARGET_ARCH' ]
 
@@ -XXX,XX +XXX,XX @@ summary_info += {'libpmem support':   config_host.has_key('CONFIG_LIBPMEM')}
 summary_info += {'libdaxctl support': config_host.has_key('CONFIG_LIBDAXCTL')}
 summary_info += {'libudev':           libudev.found()}
 summary_info += {'FUSE lseek':        fuse_lseek.found()}
+summary_info += {'Multiprocess QEMU': config_host.has_key('CONFIG_MULTIPROCESS_ALLOWED')}
 summary(summary_info, bool_yn: true, section: 'Dependencies')
 
 if not supported_cpus.contains(cpu)
diff --git a/Kconfig.host b/Kconfig.host
index XXXXXXX..XXXXXXX 100644
--- a/Kconfig.host
+++ b/Kconfig.host
@@ -XXX,XX +XXX,XX @@ config VIRTFS
 
 config PVRDMA
     bool
+
+config MULTIPROCESS_ALLOWED
+    bool
+    imply MULTIPROCESS
diff --git a/hw/Kconfig b/hw/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/Kconfig
+++ b/hw/Kconfig
@@ -XXX,XX +XXX,XX @@ source pci-host/Kconfig
 source pcmcia/Kconfig
 source pci/Kconfig
 source rdma/Kconfig
+source remote/Kconfig
 source rtc/Kconfig
 source scsi/Kconfig
 source sd/Kconfig
diff --git a/hw/remote/Kconfig b/hw/remote/Kconfig
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/hw/remote/Kconfig
@@ -XXX,XX +XXX,XX @@
+config MULTIPROCESS
+    bool
+    depends on PCI && KVM
-- 
2.29.2

From: Jagannathan Raman <jag.raman@oracle.com>

PCI host bridge is setup for the remote device process. It is
implemented using remote-pcihost object. It is an extension of the PCI
host bridge setup by QEMU.
Remote-pcihost configures a PCI bus which could be used by the remote
PCI device to latch on to.

[Added PCI_EXPRESS condition in hw/remote/Kconfig since remote-pcihost
needs PCIe. This solves "make check" failure on s390x. Fix suggested by
Philippe Mathieu-Daudé <philmd@redhat.com> and Thomas Huth
<thuth@redhat.com>.
--Stefan]

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 MAINTAINERS                  |  2 +
 include/hw/pci-host/remote.h | 29 ++++++++++++++
 hw/pci-host/remote.c         | 75 ++++++++++++++++++++++++++++++++++++
 hw/pci-host/Kconfig          |  3 ++
 hw/pci-host/meson.build      |  1 +
 hw/remote/Kconfig            |  3 +-
 6 files changed, 112 insertions(+), 1 deletion(-)
 create mode 100644 include/hw/pci-host/remote.h
 create mode 100644 hw/pci-host/remote.c

diff --git a/MAINTAINERS b/MAINTAINERS
index XXXXXXX..XXXXXXX 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -XXX,XX +XXX,XX @@ M: John G Johnson <john.g.johnson@oracle.com>
 S: Maintained
 F: docs/devel/multi-process.rst
 F: docs/system/multi-process.rst
+F: hw/pci-host/remote.c
+F: include/hw/pci-host/remote.h
 
 Build and test automation
 -------------------------
diff --git a/include/hw/pci-host/remote.h b/include/hw/pci-host/remote.h
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/include/hw/pci-host/remote.h
@@ -XXX,XX +XXX,XX @@
+/*
+ * PCI Host for remote device
+ *
+ * Copyright © 2018, 2021 Oracle and/or its affiliates.
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#ifndef REMOTE_PCIHOST_H
+#define REMOTE_PCIHOST_H
+
+#include "exec/memory.h"
+#include "hw/pci/pcie_host.h"
+
+#define TYPE_REMOTE_PCIHOST "remote-pcihost"
+OBJECT_DECLARE_SIMPLE_TYPE(RemotePCIHost, REMOTE_PCIHOST)
+
+struct RemotePCIHost {
+    /*< private >*/
+    PCIExpressHost parent_obj;
+    /*< public >*/
+
+    MemoryRegion *mr_pci_mem;
+    MemoryRegion *mr_sys_io;
+};
+
+#endif
diff --git a/hw/pci-host/remote.c b/hw/pci-host/remote.c
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/hw/pci-host/remote.c
@@ -XXX,XX +XXX,XX @@
+/*
+ * Remote PCI host device
+ *
+ * Unlike PCI host devices that model physical hardware, the purpose
+ * of this PCI host is to host multi-process QEMU devices.
+ *
+ * Multi-process QEMU extends the PCI host of a QEMU machine into a
+ * remote process. Any PCI device attached to the remote process is
+ * visible in the QEMU guest. This allows existing QEMU device models
+ * to be reused in the remote process.
+ *
+ * This PCI host is purely a container for PCI devices. It's fake in the
+ * sense that the guest never sees this PCI host and has no way of
+ * accessing it. Its job is just to provide the environment that QEMU
+ * PCI device models need when running in a remote process.
+ *
+ * Copyright © 2018, 2021 Oracle and/or its affiliates.
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#include "qemu/osdep.h"
+#include "qemu-common.h"
+
+#include "hw/pci/pci.h"
+#include "hw/pci/pci_host.h"
+#include "hw/pci/pcie_host.h"
+#include "hw/qdev-properties.h"
+#include "hw/pci-host/remote.h"
+#include "exec/memory.h"
+
+static const char *remote_pcihost_root_bus_path(PCIHostState *host_bridge,
+                                                PCIBus *rootbus)
+{
+    return "0000:00";
+}
+
+static void remote_pcihost_realize(DeviceState *dev, Error **errp)
+{
+    PCIHostState *pci = PCI_HOST_BRIDGE(dev);
+    RemotePCIHost *s = REMOTE_PCIHOST(dev);
+
+    pci->bus = pci_root_bus_new(DEVICE(s), "remote-pci",
+                                s->mr_pci_mem, s->mr_sys_io,
+                                0, TYPE_PCIE_BUS);
+}
+
+static void remote_pcihost_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    PCIHostBridgeClass *hc = PCI_HOST_BRIDGE_CLASS(klass);
+
+    hc->root_bus_path = remote_pcihost_root_bus_path;
+    dc->realize = remote_pcihost_realize;
+
+    dc->user_creatable = false;
+    set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
+    dc->fw_name = "pci";
+}
+
+static const TypeInfo remote_pcihost_info = {
+    .name = TYPE_REMOTE_PCIHOST,
+    .parent = TYPE_PCIE_HOST_BRIDGE,
+    .instance_size = sizeof(RemotePCIHost),
+    .class_init = remote_pcihost_class_init,
+};
+
+static void remote_pcihost_register(void)
+{
+    type_register_static(&remote_pcihost_info);
+}
+
+type_init(remote_pcihost_register)
diff --git a/hw/pci-host/Kconfig b/hw/pci-host/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/pci-host/Kconfig
+++ b/hw/pci-host/Kconfig
@@ -XXX,XX +XXX,XX @@ config PCI_POWERNV
     select PCI_EXPRESS
     select MSI_NONBROKEN
     select PCIE_PORT
+
+config REMOTE_PCIHOST
+    bool
diff --git a/hw/pci-host/meson.build b/hw/pci-host/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/hw/pci-host/meson.build
+++ b/hw/pci-host/meson.build
@@ -XXX,XX +XXX,XX @@ pci_ss.add(when: 'CONFIG_PCI_EXPRESS_XILINX', if_true: files('xilinx-pcie.c'))
 pci_ss.add(when: 'CONFIG_PCI_I440FX', if_true: files('i440fx.c'))
 pci_ss.add(when: 'CONFIG_PCI_SABRE', if_true: files('sabre.c'))
 pci_ss.add(when: 'CONFIG_XEN_IGD_PASSTHROUGH', if_true: files('xen_igd_pt.c'))
+pci_ss.add(when: 'CONFIG_REMOTE_PCIHOST', if_true: files('remote.c'))
 
 # PPC devices
 pci_ss.add(when: 'CONFIG_PREP_PCI', if_true: files('prep.c'))
diff --git a/hw/remote/Kconfig b/hw/remote/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/remote/Kconfig
+++ b/hw/remote/Kconfig
@@ -XXX,XX +XXX,XX @@
 config MULTIPROCESS
     bool
-    depends on PCI && KVM
+    depends on PCI && PCI_EXPRESS && KVM
+    select REMOTE_PCIHOST
-- 
2.29.2

From: Jagannathan Raman <jag.raman@oracle.com>

x-remote-machine object sets up various subsystems of the remote
device process. Instantiate PCI host bridge object and initialize RAM, IO &
PCI memory regions.

Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: c537f38d17f90453ca610c6b70cf3480274e0ba1.1611938319.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 MAINTAINERS                  |  2 ++
 include/hw/pci-host/remote.h |  1 +
 include/hw/remote/machine.h  | 27 ++++++++++++++
 hw/remote/machine.c          | 70 ++++++++++++++++++++++++++++++++++++
 hw/meson.build               |  1 +
 hw/remote/meson.build        |  5 +++
 6 files changed, 106 insertions(+)
 create mode 100644 include/hw/remote/machine.h
 create mode 100644 hw/remote/machine.c
 create mode 100644 hw/remote/meson.build

diff --git a/MAINTAINERS b/MAINTAINERS
index XXXXXXX..XXXXXXX 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -XXX,XX +XXX,XX @@ F: docs/devel/multi-process.rst
 F: docs/system/multi-process.rst
 F: hw/pci-host/remote.c
 F: include/hw/pci-host/remote.h
+F: hw/remote/machine.c
+F: include/hw/remote/machine.h
 
 Build and test automation
 -------------------------
diff --git a/include/hw/pci-host/remote.h b/include/hw/pci-host/remote.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/pci-host/remote.h
+++ b/include/hw/pci-host/remote.h
@@ -XXX,XX +XXX,XX @@ struct RemotePCIHost {
 
     MemoryRegion *mr_pci_mem;
     MemoryRegion *mr_sys_io;
+    MemoryRegion *mr_sys_mem;
 };
 
 #endif
diff --git a/include/hw/remote/machine.h b/include/hw/remote/machine.h
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/include/hw/remote/machine.h
@@ -XXX,XX +XXX,XX @@
+/*
+ * Remote machine configuration
+ *
+ * Copyright © 2018, 2021 Oracle and/or its affiliates.
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#ifndef REMOTE_MACHINE_H
+#define REMOTE_MACHINE_H
+
+#include "qom/object.h"
+#include "hw/boards.h"
+#include "hw/pci-host/remote.h"
+
+struct RemoteMachineState {
+    MachineState parent_obj;
+
+    RemotePCIHost *host;
+};
+
+#define TYPE_REMOTE_MACHINE "x-remote-machine"
+OBJECT_DECLARE_SIMPLE_TYPE(RemoteMachineState, REMOTE_MACHINE)
+
+#endif
diff --git a/hw/remote/machine.c b/hw/remote/machine.c
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/hw/remote/machine.c
@@ -XXX,XX +XXX,XX @@
+/*
+ * Machine for remote device
+ *
+ *  This machine type is used by the remote device process in multi-process
+ *  QEMU. QEMU device models depend on parent busses, interrupt controllers,
+ *  memory regions, etc. The remote machine type offers this environment so
+ *  that QEMU device models can be used as remote devices.
+ *
+ * Copyright © 2018, 2021 Oracle and/or its affiliates.
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#include "qemu/osdep.h"
+#include "qemu-common.h"
+
+#include "hw/remote/machine.h"
+#include "exec/address-spaces.h"
+#include "exec/memory.h"
+#include "qapi/error.h"
+
+static void remote_machine_init(MachineState *machine)
+{
+    MemoryRegion *system_memory, *system_io, *pci_memory;
+    RemoteMachineState *s = REMOTE_MACHINE(machine);
+    RemotePCIHost *rem_host;
+
+    system_memory = get_system_memory();
+    system_io = get_system_io();
+
+    pci_memory = g_new(MemoryRegion, 1);
+    memory_region_init(pci_memory, NULL, "pci", UINT64_MAX);
+
+    rem_host = REMOTE_PCIHOST(qdev_new(TYPE_REMOTE_PCIHOST));
+
+    rem_host->mr_pci_mem = pci_memory;
+    rem_host->mr_sys_mem = system_memory;
+    rem_host->mr_sys_io = system_io;
+
+    s->host = rem_host;
+
+    object_property_add_child(OBJECT(s), "remote-pcihost", OBJECT(rem_host));
+    memory_region_add_subregion_overlap(system_memory, 0x0, pci_memory, -1);
+
+    qdev_realize(DEVICE(rem_host), sysbus_get_default(), &error_fatal);
+}
+
+static void remote_machine_class_init(ObjectClass *oc, void *data)
+{
+    MachineClass *mc = MACHINE_CLASS(oc);
+
+    mc->init = remote_machine_init;
+    mc->desc = "Experimental remote machine";
+}
+
+static const TypeInfo remote_machine = {
+    .name = TYPE_REMOTE_MACHINE,
+    .parent = TYPE_MACHINE,
+    .instance_size = sizeof(RemoteMachineState),
+    .class_init = remote_machine_class_init,
+};
+
+static void remote_machine_register_types(void)
+{
+    type_register_static(&remote_machine);
+}
+
+type_init(remote_machine_register_types);
diff --git a/hw/meson.build b/hw/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/hw/meson.build
+++ b/hw/meson.build
@@ -XXX,XX +XXX,XX @@ subdir('moxie')
 subdir('nios2')
 subdir('openrisc')
 subdir('ppc')
+subdir('remote')
 subdir('riscv')
 subdir('rx')
 subdir('s390x')
diff --git a/hw/remote/meson.build b/hw/remote/meson.build
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/hw/remote/meson.build
@@ -XXX,XX +XXX,XX @@
+remote_ss = ss.source_set()
+
+remote_ss.add(when: 'CONFIG_MULTIPROCESS', if_true: files('machine.c'))
+
+softmmu_ss.add_all(when: 'CONFIG_MULTIPROCESS', if_true: remote_ss)
-- 
2.29.2

From: Elena Ufimtseva <elena.ufimtseva@oracle.com>

Adds qio_channel_writev_full_all() to transmit both data and FDs.
Refactors existing code to use this helper.

Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 480fbf1fe4152495d60596c9b665124549b426a5.1611938319.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 include/io/channel.h | 25 +++++++++++++++++++++++++
 io/channel.c         | 15 ++++++++++++++-
 2 files changed, 39 insertions(+), 1 deletion(-)

From: Elena Ufimtseva <elena.ufimtseva@oracle.com>

Adds qio_channel_readv_full_all_eof() and qio_channel_readv_full_all()
to read both data and FDs. Refactors existing code to use these helpers.

Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: b059c4cc0fb741e794d644c144cc21372cad877d.1611938319.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 include/io/channel.h |  53 +++++++++++++++++++++++
 io/channel.c         | 101 ++++++++++++++++++++++++++++++++++---------
 2 files changed, 134 insertions(+), 20 deletions(-)

diff --git a/include/io/channel.h b/include/io/channel.h
index XXXXXXX..XXXXXXX 100644
--- a/include/io/channel.h
+++ b/include/io/channel.h
@@ -XXX,XX +XXX,XX @@ void qio_channel_set_aio_fd_handler(QIOChannel *ioc,
                                     IOHandler *io_write,
                                     void *opaque);
 
+/**
+ * qio_channel_readv_full_all_eof:
+ * @ioc: the channel object
+ * @iov: the array of memory regions to read data to
+ * @niov: the length of the @iov array
+ * @fds: an array of file handles to read
+ * @nfds: number of file handles in @fds
+ * @errp: pointer to a NULL-initialized error object
+ *
+ *
+ * Performs same function as qio_channel_readv_all_eof.
+ * Additionally, attempts to read file descriptors shared
+ * over the channel. The function will wait for all
+ * requested data to be read, yielding from the current
+ * coroutine if required. data refers to both file
+ * descriptors and the iovs.
+ *
+ * Returns: 1 if all bytes were read, 0 if end-of-file
+ *          occurs without data, or -1 on error
+ */
+
+int qio_channel_readv_full_all_eof(QIOChannel *ioc,
+                                   const struct iovec *iov,
+                                   size_t niov,
+                                   int **fds, size_t *nfds,
+                                   Error **errp);
+
+/**
+ * qio_channel_readv_full_all:
+ * @ioc: the channel object
+ * @iov: the array of memory regions to read data to
+ * @niov: the length of the @iov array
+ * @fds: an array of file handles to read
+ * @nfds: number of file handles in @fds
+ * @errp: pointer to a NULL-initialized error object
+ *
+ *
+ * Performs same function as qio_channel_readv_all_eof.
+ * Additionally, attempts to read file descriptors shared
+ * over the channel. The function will wait for all
+ * requested data to be read, yielding from the current
+ * coroutine if required. data refers to both file
+ * descriptors and the iovs.
+ *
+ * Returns: 0 if all bytes were read, or -1 on error
+ */
+
+int qio_channel_readv_full_all(QIOChannel *ioc,
+                               const struct iovec *iov,
+                               size_t niov,
+                               int **fds, size_t *nfds,
+                               Error **errp);
+
 /**
  * qio_channel_writev_full_all:
  * @ioc: the channel object
diff --git a/io/channel.c b/io/channel.c
index XXXXXXX..XXXXXXX 100644
--- a/io/channel.c
+++ b/io/channel.c
@@ -XXX,XX +XXX,XX @@ int qio_channel_readv_all_eof(QIOChannel *ioc,
                               const struct iovec *iov,
                               size_t niov,
                               Error **errp)
+{
+    return qio_channel_readv_full_all_eof(ioc, iov, niov, NULL, NULL, errp);
+}
+
+int qio_channel_readv_all(QIOChannel *ioc,
+                          const struct iovec *iov,
+                          size_t niov,
+                          Error **errp)
+{
+    return qio_channel_readv_full_all(ioc, iov, niov, NULL, NULL, errp);
+}
+
+int qio_channel_readv_full_all_eof(QIOChannel *ioc,
+                                   const struct iovec *iov,
+                                   size_t niov,
+                                   int **fds, size_t *nfds,
+                                   Error **errp)
 {
     int ret = -1;
     struct iovec *local_iov = g_new(struct iovec, niov);
     struct iovec *local_iov_head = local_iov;
     unsigned int nlocal_iov = niov;
+    int **local_fds = fds;
+    size_t *local_nfds = nfds;
     bool partial = false;
 
+    if (nfds) {
+        *nfds = 0;
+    }
+
+    if (fds) {
+        *fds = NULL;
+    }
+
     nlocal_iov = iov_copy(local_iov, nlocal_iov,
                           iov, niov,
                           0, iov_size(iov, niov));
 
-    while (nlocal_iov > 0) {
+    while ((nlocal_iov > 0) || local_fds) {
         ssize_t len;
-        len = qio_channel_readv(ioc, local_iov, nlocal_iov, errp);
+        len = qio_channel_readv_full(ioc, local_iov, nlocal_iov, local_fds,
+                                     local_nfds, errp);
         if (len == QIO_CHANNEL_ERR_BLOCK) {
             if (qemu_in_coroutine()) {
                 qio_channel_yield(ioc, G_IO_IN);
@@ -XXX,XX +XXX,XX @@ int qio_channel_readv_all_eof(QIOChannel *ioc,
                 qio_channel_wait(ioc, G_IO_IN);
             }
             continue;
-        } else if (len < 0) {
-            goto cleanup;
-        } else if (len == 0) {
-            if (partial) {
-                error_setg(errp,
-                           "Unexpected end-of-file before all bytes were read");
-            } else {
+        }
+
+        if (len == 0) {
+            if (local_nfds && *local_nfds) {
+                /*
+                 * Got some FDs, but no data yet. This isn't an EOF
+                 * scenario (yet), so carry on to try to read data
+                 * on next loop iteration
+                 */
+                goto next_iter;
+            } else if (!partial) {
+                /* No fds and no data - EOF before any data read */
                 ret = 0;
+                goto cleanup;
+            } else {
+                len = -1;
+                error_setg(errp,
+                           "Unexpected end-of-file before all data were read");
+                /* Fallthrough into len < 0 handling */
+            }
+        }
+
+        if (len < 0) {
+            /* Close any FDs we previously received */
+            if (nfds && fds) {
+                size_t i;
+                for (i = 0; i < (*nfds); i++) {
+                    close((*fds)[i]);
+                }
+                g_free(*fds);
+                *fds = NULL;
+                *nfds = 0;
             }
             goto cleanup;
         }
 
+        if (nlocal_iov) {
+            iov_discard_front(&local_iov, &nlocal_iov, len);
+        }
+
+next_iter:
         partial = true;
-        iov_discard_front(&local_iov, &nlocal_iov, len);
+        local_fds = NULL;
+        local_nfds = NULL;
     }
 
     ret = 1;
@@ -XXX,XX +XXX,XX @@ int qio_channel_readv_all_eof(QIOChannel *ioc,
     return ret;
 }
 
-int qio_channel_readv_all(QIOChannel *ioc,
-                          const struct iovec *iov,
-                          size_t niov,
-                          Error **errp)
+int qio_channel_readv_full_all(QIOChannel *ioc,
+                               const struct iovec *iov,
+                               size_t niov,
+                               int **fds, size_t *nfds,
+                               Error **errp)
 {
-    int ret = qio_channel_readv_all_eof(ioc, iov, niov, errp);
+    int ret = qio_channel_readv_full_all_eof(ioc, iov, niov, fds, nfds, errp);
 
     if (ret == 0) {
-        ret = -1;
-        error_setg(errp,
-                   "Unexpected end-of-file before all bytes were read");
-    } else if (ret == 1) {
-        ret = 0;
+        error_prepend(errp,
+                      "Unexpected end-of-file before all data were read.");
+        return -1;
     }
+    if (ret == 1) {
+        return 0;
+    }
+
     return ret;
 }
 
-- 
2.29.2

From: Elena Ufimtseva <elena.ufimtseva@oracle.com>

Defines MPQemuMsg, which is the message that is sent to the remote
process. This message is sent over QIOChannel and is used to
command the remote process to perform various tasks.
Define transmission functions used by proxy and by remote.

[Replace struct iovec send[2] = {0} with {} to make clang happy as
suggested by Peter Maydell <peter.maydell@linaro.org>.
--Stefan]

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 MAINTAINERS                     |   2 +
 meson.build                     |   1 +
 hw/remote/trace.h               |   1 +
 include/hw/remote/mpqemu-link.h |  63 ++++++++++
 include/sysemu/iothread.h       |   6 +
 hw/remote/mpqemu-link.c         | 205 ++++++++++++++++++++++++++++++++
 iothread.c                      |   6 +
 hw/remote/meson.build           |   1 +
 hw/remote/trace-events          |   4 +
 9 files changed, 289 insertions(+)
 create mode 100644 hw/remote/trace.h
 create mode 100644 include/hw/remote/mpqemu-link.h
 create mode 100644 hw/remote/mpqemu-link.c
 create mode 100644 hw/remote/trace-events

diff --git a/MAINTAINERS b/MAINTAINERS
index XXXXXXX..XXXXXXX 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -XXX,XX +XXX,XX @@ F: hw/pci-host/remote.c
 F: include/hw/pci-host/remote.h
 F: hw/remote/machine.c
 F: include/hw/remote/machine.h
+F: hw/remote/mpqemu-link.c
+F: include/hw/remote/mpqemu-link.h
 
 Build and test automation
 -------------------------
diff --git a/meson.build b/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/meson.build
+++ b/meson.build
@@ -XXX,XX +XXX,XX @@ if have_system
     'net',
     'softmmu',
     'ui',
+    'hw/remote',
   ]
 endif
 if have_system or have_user
diff --git a/hw/remote/trace.h b/hw/remote/trace.h
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/hw/remote/trace.h
@@ -0,0 +1 @@
+#include "trace/trace-hw_remote.h"
diff --git a/include/hw/remote/mpqemu-link.h b/include/hw/remote/mpqemu-link.h
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/include/hw/remote/mpqemu-link.h
@@ -XXX,XX +XXX,XX @@
+/*
+ * Communication channel between QEMU and remote device process
+ *
+ * Copyright © 2018, 2021 Oracle and/or its affiliates.
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#ifndef MPQEMU_LINK_H
+#define MPQEMU_LINK_H
+
+#include "qom/object.h"
+#include "qemu/thread.h"
+#include "io/channel.h"
+
+#define REMOTE_MAX_FDS 8
+
+#define MPQEMU_MSG_HDR_SIZE offsetof(MPQemuMsg, data.u64)
+
+/**
+ * MPQemuCmd:
+ *
+ * MPQemuCmd enum type to specify the command to be executed on the remote
+ * device.
+ *
+ * This uses a private protocol between QEMU and the remote process. vfio-user
+ * protocol would supersede this in the future.
+ *
+ */
+typedef enum {
+    MPQEMU_CMD_MAX,
+} MPQemuCmd;
+
+/**
+ * MPQemuMsg:
+ * @cmd: The remote command
+ * @size: Size of the data to be shared
+ * @data: Structured data
+ * @fds: File descriptors to be shared with remote device
+ *
+ * MPQemuMsg Format of the message sent to the remote device from QEMU.
+ *
+ */
+typedef struct {
+    int cmd;
+    size_t size;
+
+    union {
+        uint64_t u64;
+    } data;
+
+    int fds[REMOTE_MAX_FDS];
+    int num_fds;
+} MPQemuMsg;
+
+bool mpqemu_msg_send(MPQemuMsg *msg, QIOChannel *ioc, Error **errp);
+bool mpqemu_msg_recv(MPQemuMsg *msg, QIOChannel *ioc, Error **errp);
+
+bool mpqemu_msg_valid(MPQemuMsg *msg);
+
+#endif
diff --git a/include/sysemu/iothread.h b/include/sysemu/iothread.h
index XXXXXXX..XXXXXXX 100644
--- a/include/sysemu/iothread.h
+++ b/include/sysemu/iothread.h
@@ -XXX,XX +XXX,XX @@ IOThread *iothread_create(const char *id, Error **errp);
 void iothread_stop(IOThread *iothread);
 void iothread_destroy(IOThread *iothread);
 
+/*
+ * Returns true if executing withing IOThread context,
+ * false otherwise.
+ */
+bool qemu_in_iothread(void);
+
 #endif /* IOTHREAD_H */
diff --git a/hw/remote/mpqemu-link.c b/hw/remote/mpqemu-link.c
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/hw/remote/mpqemu-link.c
@@ -XXX,XX +XXX,XX @@
+/*
+ * Communication channel between QEMU and remote device process
+ *
+ * Copyright © 2018, 2021 Oracle and/or its affiliates.
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#include "qemu/osdep.h"
+#include "qemu-common.h"
+
+#include "qemu/module.h"
+#include "hw/remote/mpqemu-link.h"
+#include "qapi/error.h"
+#include "qemu/iov.h"
+#include "qemu/error-report.h"
+#include "qemu/main-loop.h"
+#include "io/channel.h"
+#include "sysemu/iothread.h"
+#include "trace.h"
+
+/*
+ * Send message over the ioc QIOChannel.
+ * This function is safe to call from:
+ * - main loop in co-routine context. Will block the main loop if not in
+ *   co-routine context;
+ * - vCPU thread with no co-routine context and if the channel is not part
+ *   of the main loop handling;
+ * - IOThread within co-routine context, outside of co-routine context
+ *   will block IOThread;
+ * Returns true if no errors were encountered, false otherwise.
+ */
+bool mpqemu_msg_send(MPQemuMsg *msg, QIOChannel *ioc, Error **errp)
+{
+    ERRP_GUARD();
+    bool iolock = qemu_mutex_iothread_locked();
+    bool iothread = qemu_in_iothread();
+    struct iovec send[2] = {};
+    int *fds = NULL;
+    size_t nfds = 0;
+    bool ret = false;
+
+    send[0].iov_base = msg;
+    send[0].iov_len = MPQEMU_MSG_HDR_SIZE;
+
+    send[1].iov_base = (void *)&msg->data;
+    send[1].iov_len = msg->size;
+
+    if (msg->num_fds) {
+        nfds = msg->num_fds;
+        fds = msg->fds;
+    }
+
+    /*
+     * Dont use in IOThread out of co-routine context as
+     * it will block IOThread.
+     */
+    assert(qemu_in_coroutine() || !iothread);
+
+    /*
+     * Skip unlocking/locking iothread lock when the IOThread is running
+     * in co-routine context. Co-routine context is asserted above
+     * for IOThread case.
+     * Also skip lock handling while in a co-routine in the main context.
+     */
+    if (iolock && !iothread && !qemu_in_coroutine()) {
+        qemu_mutex_unlock_iothread();
+    }
+
+    if (!qio_channel_writev_full_all(ioc, send, G_N_ELEMENTS(send),
+                                    fds, nfds, errp)) {
+        ret = true;
+    } else {
+        trace_mpqemu_send_io_error(msg->cmd, msg->size, nfds);
+    }
+
+    if (iolock && !iothread && !qemu_in_coroutine()) {
+        /* See above comment why skip locking here. */
+        qemu_mutex_lock_iothread();
+    }
+
+    return ret;
+}
+
+/*
+ * Read message from the ioc QIOChannel.
+ * This function is safe to call from:
+ * - From main loop in co-routine context. Will block the main loop if not in
+ *   co-routine context;
+ * - From vCPU thread with no co-routine context and if the channel is not part
+ *   of the main loop handling;
+ * - From IOThread within co-routine context, outside of co-routine context
+ *   will block IOThread;
+ */
+static ssize_t mpqemu_read(QIOChannel *ioc, void *buf, size_t len, int **fds,
+                           size_t *nfds, Error **errp)
+{
+    ERRP_GUARD();
+    struct iovec iov = { .iov_base = buf, .iov_len = len };
+    bool iolock = qemu_mutex_iothread_locked();
+    bool iothread = qemu_in_iothread();
+    int ret = -1;
+
+    /*
+     * Dont use in IOThread out of co-routine context as
+     * it will block IOThread.
+     */
+    assert(qemu_in_coroutine() || !iothread);
+
+    if (iolock && !iothread && !qemu_in_coroutine()) {
+        qemu_mutex_unlock_iothread();
+    }
+
+    ret = qio_channel_readv_full_all_eof(ioc, &iov, 1, fds, nfds, errp);
+
+    if (iolock && !iothread && !qemu_in_coroutine()) {
+        qemu_mutex_lock_iothread();
+    }
+
+    return (ret <= 0) ? ret : iov.iov_len;
+}
+
+bool mpqemu_msg_recv(MPQemuMsg *msg, QIOChannel *ioc, Error **errp)
+{
+    ERRP_GUARD();
+    g_autofree int *fds = NULL;
+    size_t nfds = 0;
+    ssize_t len;
+    bool ret = false;
+
+    len = mpqemu_read(ioc, msg, MPQEMU_MSG_HDR_SIZE, &fds, &nfds, errp);
+    if (len <= 0) {
+        goto fail;
+    } else if (len != MPQEMU_MSG_HDR_SIZE) {
+        error_setg(errp, "Message header corrupted");
+        goto fail;
+    }
+
+    if (msg->size > sizeof(msg->data)) {
+        error_setg(errp, "Invalid size for message");
+        goto fail;
+    }
+
+    if (!msg->size) {
+        goto copy_fds;
+    }
+
+    len = mpqemu_read(ioc, &msg->data, msg->size, NULL, NULL, errp);
+    if (len <= 0) {
+        goto fail;
+    }
+    if (len != msg->size) {
+        error_setg(errp, "Unable to read full message");
+        goto fail;
+    }
+
+copy_fds:
+    msg->num_fds = nfds;
+    if (nfds > G_N_ELEMENTS(msg->fds)) {
+        error_setg(errp,
+                   "Overflow error: received %zu fds, more than max of %d fds",
+                   nfds, REMOTE_MAX_FDS);
+        goto fail;
+    }
+    if (nfds) {
+        memcpy(msg->fds, fds, nfds * sizeof(int));
+    }
+
+    ret = true;
+
+fail:
+    if (*errp) {
+        trace_mpqemu_recv_io_error(msg->cmd, msg->size, nfds);
+    }
+    while (*errp && nfds) {
+        close(fds[nfds - 1]);
+        nfds--;
+    }
+
+    return ret;
+}
+
+bool mpqemu_msg_valid(MPQemuMsg *msg)
+{
+    if (msg->cmd >= MPQEMU_CMD_MAX && msg->cmd < 0) {
+        return false;
+    }
+
+    /* Verify FDs. */
+    if (msg->num_fds >= REMOTE_MAX_FDS) {
+        return false;
+    }
+
+    if (msg->num_fds > 0) {
+        for (int i = 0; i < msg->num_fds; i++) {
+            if (fcntl(msg->fds[i], F_GETFL) == -1) {
+                return false;
+            }
+        }
+    }
+
+    return true;
+}
diff --git a/iothread.c b/iothread.c
index XXXXXXX..XXXXXXX 100644
--- a/iothread.c
+++ b/iothread.c
@@ -XXX,XX +XXX,XX @@ IOThread *iothread_by_id(const char *id)
 {
     return IOTHREAD(object_resolve_path_type(id, TYPE_IOTHREAD, NULL));
 }
+
+bool qemu_in_iothread(void)
+{
+    return qemu_get_current_aio_context() == qemu_get_aio_context() ?
+                    false : true;
+}
diff --git a/hw/remote/meson.build b/hw/remote/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/hw/remote/meson.build
+++ b/hw/remote/meson.build
@@ -XXX,XX +XXX,XX @@
 remote_ss = ss.source_set()
 
 remote_ss.add(when: 'CONFIG_MULTIPROCESS', if_true: files('machine.c'))
+remote_ss.add(when: 'CONFIG_MULTIPROCESS', if_true: files('mpqemu-link.c'))
 
 softmmu_ss.add_all(when: 'CONFIG_MULTIPROCESS', if_true: remote_ss)
diff --git a/hw/remote/trace-events b/hw/remote/trace-events
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/hw/remote/trace-events
@@ -XXX,XX +XXX,XX @@
+# multi-process trace events
+
+mpqemu_send_io_error(int cmd, int size, int nfds) "send command %d size %d, %d file descriptors to remote process"
+mpqemu_recv_io_error(int cmd, int size, int nfds) "failed to receive %d size %d, %d file descriptors to remote process"
-- 
2.29.2

From: Jagannathan Raman <jag.raman@oracle.com>

Initializes the message handler function in the remote process. It is
called whenever there's an event pending on QIOChannel that registers
this function.

Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 99d38d8b93753a6409ac2340e858858cda59ab1b.1611938319.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 MAINTAINERS                 |  1 +
 include/hw/remote/machine.h |  9 ++++++
 hw/remote/message.c         | 57 +++++++++++++++++++++++++++++++++++++
 hw/remote/meson.build       |  1 +
 4 files changed, 68 insertions(+)
 create mode 100644 hw/remote/message.c

diff --git a/MAINTAINERS b/MAINTAINERS
index XXXXXXX..XXXXXXX 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -XXX,XX +XXX,XX @@ F: hw/remote/machine.c
 F: include/hw/remote/machine.h
 F: hw/remote/mpqemu-link.c
 F: include/hw/remote/mpqemu-link.h
+F: hw/remote/message.c
 
 Build and test automation
 -------------------------
diff --git a/include/hw/remote/machine.h b/include/hw/remote/machine.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/remote/machine.h
+++ b/include/hw/remote/machine.h
@@ -XXX,XX +XXX,XX @@
 #include "qom/object.h"
 #include "hw/boards.h"
 #include "hw/pci-host/remote.h"
+#include "io/channel.h"
 
 struct RemoteMachineState {
     MachineState parent_obj;
@@ -XXX,XX +XXX,XX @@ struct RemoteMachineState {
     RemotePCIHost *host;
 };
 
+/* Used to pass to co-routine device and ioc. */
+typedef struct RemoteCommDev {
+    PCIDevice *dev;
+    QIOChannel *ioc;
+} RemoteCommDev;
+
 #define TYPE_REMOTE_MACHINE "x-remote-machine"
 OBJECT_DECLARE_SIMPLE_TYPE(RemoteMachineState, REMOTE_MACHINE)
 
+void coroutine_fn mpqemu_remote_msg_loop_co(void *data);
+
 #endif
diff --git a/hw/remote/message.c b/hw/remote/message.c
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/hw/remote/message.c
@@ -XXX,XX +XXX,XX @@
+/*
+ * Copyright © 2020, 2021 Oracle and/or its affiliates.
+ *
+ * This work is licensed under the terms of the GNU GPL-v2, version 2 or later.
+ *
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#include "qemu/osdep.h"
+#include "qemu-common.h"
+
+#include "hw/remote/machine.h"
+#include "io/channel.h"
+#include "hw/remote/mpqemu-link.h"
+#include "qapi/error.h"
+#include "sysemu/runstate.h"
+
+void coroutine_fn mpqemu_remote_msg_loop_co(void *data)
+{
+    g_autofree RemoteCommDev *com = (RemoteCommDev *)data;
+    PCIDevice *pci_dev = NULL;
+    Error *local_err = NULL;
+
+    assert(com->ioc);
+
+    pci_dev = com->dev;
+    for (; !local_err;) {
+        MPQemuMsg msg = {0};
+
+        if (!mpqemu_msg_recv(&msg, com->ioc, &local_err)) {
+            break;
+        }
+
+        if (!mpqemu_msg_valid(&msg)) {
+            error_setg(&local_err, "Received invalid message from proxy"
+                                   "in remote process pid="FMT_pid"",
+                                   getpid());
+            break;
+        }
+
+        switch (msg.cmd) {
+        default:
+            error_setg(&local_err,
+                       "Unknown command (%d) received for device %s"
+                       " (pid="FMT_pid")",
+                       msg.cmd, DEVICE(pci_dev)->id, getpid());
+        }
+    }
+
+    if (local_err) {
+        error_report_err(local_err);
+        qemu_system_shutdown_request(SHUTDOWN_CAUSE_HOST_ERROR);
+    } else {
+        qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN);
+    }
+}
diff --git a/hw/remote/meson.build b/hw/remote/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/hw/remote/meson.build
+++ b/hw/remote/meson.build
@@ -XXX,XX +XXX,XX @@ remote_ss = ss.source_set()
 
 remote_ss.add(when: 'CONFIG_MULTIPROCESS', if_true: files('machine.c'))
 remote_ss.add(when: 'CONFIG_MULTIPROCESS', if_true: files('mpqemu-link.c'))
+remote_ss.add(when: 'CONFIG_MULTIPROCESS', if_true: files('message.c'))
 
 softmmu_ss.add_all(when: 'CONFIG_MULTIPROCESS', if_true: remote_ss)
-- 
2.29.2

From: Jagannathan Raman <jag.raman@oracle.com>

Associate the file descriptor for a PCIDevice in remote process with
DeviceState object.

Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: f405a2ed5d7518b87bea7c59cfdf334d67e5ee51.1611938319.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 MAINTAINERS            |   1 +
 hw/remote/remote-obj.c | 203 +++++++++++++++++++++++++++++++++++++++++
 hw/remote/meson.build  |   1 +
 3 files changed, 205 insertions(+)
 create mode 100644 hw/remote/remote-obj.c

diff --git a/MAINTAINERS b/MAINTAINERS
index XXXXXXX..XXXXXXX 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -XXX,XX +XXX,XX @@ F: include/hw/remote/machine.h
 F: hw/remote/mpqemu-link.c
 F: include/hw/remote/mpqemu-link.h
 F: hw/remote/message.c
+F: hw/remote/remote-obj.c
 
 Build and test automation
 -------------------------
diff --git a/hw/remote/remote-obj.c b/hw/remote/remote-obj.c
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/hw/remote/remote-obj.c
@@ -XXX,XX +XXX,XX @@
+/*
+ * Copyright © 2020, 2021 Oracle and/or its affiliates.
+ *
+ * This work is licensed under the terms of the GNU GPL-v2, version 2 or later.
+ *
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#include "qemu/osdep.h"
+#include "qemu-common.h"
+
+#include "qemu/error-report.h"
+#include "qemu/notify.h"
+#include "qom/object_interfaces.h"
+#include "hw/qdev-core.h"
+#include "io/channel.h"
+#include "hw/qdev-core.h"
+#include "hw/remote/machine.h"
+#include "io/channel-util.h"
+#include "qapi/error.h"
+#include "sysemu/sysemu.h"
+#include "hw/pci/pci.h"
+#include "qemu/sockets.h"
+#include "monitor/monitor.h"
+
+#define TYPE_REMOTE_OBJECT "x-remote-object"
+OBJECT_DECLARE_TYPE(RemoteObject, RemoteObjectClass, REMOTE_OBJECT)
+
+struct RemoteObjectClass {
+    ObjectClass parent_class;
+
+    unsigned int nr_devs;
+    unsigned int max_devs;
+};
+
+struct RemoteObject {
+    /* private */
+    Object parent;
+
+    Notifier machine_done;
+
+    int32_t fd;
+    char *devid;
+
+    QIOChannel *ioc;
+
+    DeviceState *dev;
+    DeviceListener listener;
+};
+
+static void remote_object_set_fd(Object *obj, const char *str, Error **errp)
+{
+    RemoteObject *o = REMOTE_OBJECT(obj);
+    int fd = -1;
+
+    fd = monitor_fd_param(monitor_cur(), str, errp);
+    if (fd == -1) {
+        error_prepend(errp, "Could not parse remote object fd %s:", str);
+        return;
+    }
+
+    if (!fd_is_socket(fd)) {
+        error_setg(errp, "File descriptor '%s' is not a socket", str);
+        close(fd);
+        return;
+    }
+
+    o->fd = fd;
+}
+
+static void remote_object_set_devid(Object *obj, const char *str, Error **errp)
+{
+    RemoteObject *o = REMOTE_OBJECT(obj);
+
+    g_free(o->devid);
+
+    o->devid = g_strdup(str);
+}
+
+static void remote_object_unrealize_listener(DeviceListener *listener,
+                                             DeviceState *dev)
+{
+    RemoteObject *o = container_of(listener, RemoteObject, listener);
+
+    if (o->dev == dev) {
+        object_unref(OBJECT(o));
+    }
+}
+
+static void remote_object_machine_done(Notifier *notifier, void *data)
+{
+    RemoteObject *o = container_of(notifier, RemoteObject, machine_done);
+    DeviceState *dev = NULL;
+    QIOChannel *ioc = NULL;
+    Coroutine *co = NULL;
+    RemoteCommDev *comdev = NULL;
+    Error *err = NULL;
+
+    dev = qdev_find_recursive(sysbus_get_default(), o->devid);
+    if (!dev || !object_dynamic_cast(OBJECT(dev), TYPE_PCI_DEVICE)) {
+        error_report("%s is not a PCI device", o->devid);
+        return;
+    }
+
+    ioc = qio_channel_new_fd(o->fd, &err);
+    if (!ioc) {
+        error_report_err(err);
+        return;
+    }
+    qio_channel_set_blocking(ioc, false, NULL);
+
+    o->dev = dev;
+
+    o->listener.unrealize = remote_object_unrealize_listener;
+    device_listener_register(&o->listener);
+
+    /* co-routine should free this. */
+    comdev = g_new0(RemoteCommDev, 1);
+    *comdev = (RemoteCommDev) {
+        .ioc = ioc,
+        .dev = PCI_DEVICE(dev),
+    };
+
+    co = qemu_coroutine_create(mpqemu_remote_msg_loop_co, comdev);
+    qemu_coroutine_enter(co);
+}
+
+static void remote_object_init(Object *obj)
+{
+    RemoteObjectClass *k = REMOTE_OBJECT_GET_CLASS(obj);
+    RemoteObject *o = REMOTE_OBJECT(obj);
+
+    if (k->nr_devs >= k->max_devs) {
+        error_report("Reached maximum number of devices: %u", k->max_devs);
+        return;
+    }
+
+    o->ioc = NULL;
+    o->fd = -1;
+    o->devid = NULL;
+
+    k->nr_devs++;
+
+    o->machine_done.notify = remote_object_machine_done;
+    qemu_add_machine_init_done_notifier(&o->machine_done);
+}
+
+static void remote_object_finalize(Object *obj)
+{
+    RemoteObjectClass *k = REMOTE_OBJECT_GET_CLASS(obj);
+    RemoteObject *o = REMOTE_OBJECT(obj);
+
+    device_listener_unregister(&o->listener);
+
+    if (o->ioc) {
+        qio_channel_shutdown(o->ioc, QIO_CHANNEL_SHUTDOWN_BOTH, NULL);
+        qio_channel_close(o->ioc, NULL);
+    }
+
+    object_unref(OBJECT(o->ioc));
+
+    k->nr_devs--;
+    g_free(o->devid);
+}
+
+static void remote_object_class_init(ObjectClass *klass, void *data)
+{
+    RemoteObjectClass *k = REMOTE_OBJECT_CLASS(klass);
+
+    /*
+     * Limit number of supported devices to 1. This is done to avoid devices
+     * from one VM accessing the RAM of another VM. This is done until we
+     * start using separate address spaces for individual devices.
+     */
+    k->max_devs = 1;
+    k->nr_devs = 0;
+
+    object_class_property_add_str(klass, "fd", NULL, remote_object_set_fd);
+    object_class_property_add_str(klass, "devid", NULL,
+                                  remote_object_set_devid);
+}
+
+static const TypeInfo remote_object_info = {
+    .name = TYPE_REMOTE_OBJECT,
+    .parent = TYPE_OBJECT,
+    .instance_size = sizeof(RemoteObject),
+    .instance_init = remote_object_init,
+    .instance_finalize = remote_object_finalize,
+    .class_size = sizeof(RemoteObjectClass),
+    .class_init = remote_object_class_init,
+    .interfaces = (InterfaceInfo[]) {
+        { TYPE_USER_CREATABLE },
+        { }
+    }
+};
+
+static void register_types(void)
+{
+    type_register_static(&remote_object_info);
+}
+
+type_init(register_types);
diff --git a/hw/remote/meson.build b/hw/remote/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/hw/remote/meson.build
+++ b/hw/remote/meson.build
@@ -XXX,XX +XXX,XX @@ remote_ss = ss.source_set()
 remote_ss.add(when: 'CONFIG_MULTIPROCESS', if_true: files('machine.c'))
 remote_ss.add(when: 'CONFIG_MULTIPROCESS', if_true: files('mpqemu-link.c'))
 remote_ss.add(when: 'CONFIG_MULTIPROCESS', if_true: files('message.c'))
+remote_ss.add(when: 'CONFIG_MULTIPROCESS', if_true: files('remote-obj.c'))
 
 softmmu_ss.add_all(when: 'CONFIG_MULTIPROCESS', if_true: remote_ss)
-- 
2.29.2

From: Jagannathan Raman <jag.raman@oracle.com>

SyncSysMemMsg message format is defined. It is used to send
file descriptors of the RAM regions to remote device.
RAM on the remote device is configured with a set of file descriptors.
Old RAM regions are deleted and new regions, each with an fd, is
added to the RAM.

Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 7d2d1831d812e85f681e7a8ab99e032cf4704689.1611938319.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 MAINTAINERS                     |  2 +
 include/hw/remote/memory.h      | 19 ++++++++++
 include/hw/remote/mpqemu-link.h | 10 +++++
 hw/remote/memory.c              | 65 +++++++++++++++++++++++++++++++++
 hw/remote/mpqemu-link.c         | 11 ++++++
 hw/remote/meson.build           |  2 +
 6 files changed, 109 insertions(+)
 create mode 100644 include/hw/remote/memory.h
 create mode 100644 hw/remote/memory.c

diff --git a/MAINTAINERS b/MAINTAINERS
index XXXXXXX..XXXXXXX 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -XXX,XX +XXX,XX @@ F: hw/remote/mpqemu-link.c
 F: include/hw/remote/mpqemu-link.h
 F: hw/remote/message.c
 F: hw/remote/remote-obj.c
+F: include/hw/remote/memory.h
+F: hw/remote/memory.c
 
 Build and test automation
 -------------------------
diff --git a/include/hw/remote/memory.h b/include/hw/remote/memory.h
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/include/hw/remote/memory.h
@@ -XXX,XX +XXX,XX @@
+/*
+ * Memory manager for remote device
+ *
+ * Copyright © 2018, 2021 Oracle and/or its affiliates.
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#ifndef REMOTE_MEMORY_H
+#define REMOTE_MEMORY_H
+
+#include "exec/hwaddr.h"
+#include "hw/remote/mpqemu-link.h"
+
+void remote_sysmem_reconfig(MPQemuMsg *msg, Error **errp);
+
+#endif
diff --git a/include/hw/remote/mpqemu-link.h b/include/hw/remote/mpqemu-link.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/remote/mpqemu-link.h
+++ b/include/hw/remote/mpqemu-link.h
@@ -XXX,XX +XXX,XX @@
 #include "qom/object.h"
 #include "qemu/thread.h"
 #include "io/channel.h"
+#include "exec/hwaddr.h"
 
 #define REMOTE_MAX_FDS 8
 
@@ -XXX,XX +XXX,XX @@
  *
  */
 typedef enum {
+    MPQEMU_CMD_SYNC_SYSMEM,
     MPQEMU_CMD_MAX,
 } MPQemuCmd;
 
+typedef struct {
+    hwaddr gpas[REMOTE_MAX_FDS];
+    uint64_t sizes[REMOTE_MAX_FDS];
+    off_t offsets[REMOTE_MAX_FDS];
+} SyncSysmemMsg;
+
 /**
  * MPQemuMsg:
  * @cmd: The remote command
@@ -XXX,XX +XXX,XX @@ typedef enum {
  * MPQemuMsg Format of the message sent to the remote device from QEMU.
  *
  */
+
 typedef struct {
     int cmd;
     size_t size;
 
     union {
         uint64_t u64;
+        SyncSysmemMsg sync_sysmem;
     } data;
 
     int fds[REMOTE_MAX_FDS];
diff --git a/hw/remote/memory.c b/hw/remote/memory.c
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/hw/remote/memory.c
@@ -XXX,XX +XXX,XX @@
+/*
+ * Memory manager for remote device
+ *
+ * Copyright © 2018, 2021 Oracle and/or its affiliates.
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#include "qemu/osdep.h"
+#include "qemu-common.h"
+
+#include "hw/remote/memory.h"
+#include "exec/address-spaces.h"
+#include "exec/ram_addr.h"
+#include "qapi/error.h"
+
+static void remote_sysmem_reset(void)
+{
+    MemoryRegion *sysmem, *subregion, *next;
+
+    sysmem = get_system_memory();
+
+    QTAILQ_FOREACH_SAFE(subregion, &sysmem->subregions, subregions_link, next) {
+        if (subregion->ram) {
+            memory_region_del_subregion(sysmem, subregion);
+            object_unparent(OBJECT(subregion));
+        }
+    }
+}
+
+void remote_sysmem_reconfig(MPQemuMsg *msg, Error **errp)
+{
+    ERRP_GUARD();
+    SyncSysmemMsg *sysmem_info = &msg->data.sync_sysmem;
+    MemoryRegion *sysmem, *subregion;
+    static unsigned int suffix;
+    int region;
+
+    sysmem = get_system_memory();
+
+    remote_sysmem_reset();
+
+    for (region = 0; region < msg->num_fds; region++) {
+        g_autofree char *name;
+        subregion = g_new(MemoryRegion, 1);
+        name = g_strdup_printf("remote-mem-%u", suffix++);
+        memory_region_init_ram_from_fd(subregion, NULL,
+                                       name, sysmem_info->sizes[region],
+                                       true, msg->fds[region],
+                                       sysmem_info->offsets[region],
+                                       errp);
+
+        if (*errp) {
+            g_free(subregion);
+            remote_sysmem_reset();
+            return;
+        }
+
+        memory_region_add_subregion(sysmem, sysmem_info->gpas[region],
+                                    subregion);
+
+    }
+}
diff --git a/hw/remote/mpqemu-link.c b/hw/remote/mpqemu-link.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/remote/mpqemu-link.c
+++ b/hw/remote/mpqemu-link.c
@@ -XXX,XX +XXX,XX @@ bool mpqemu_msg_valid(MPQemuMsg *msg)
         }
     }
 
+     /* Verify message specific fields. */
+    switch (msg->cmd) {
+    case MPQEMU_CMD_SYNC_SYSMEM:
+        if (msg->num_fds == 0 || msg->size != sizeof(SyncSysmemMsg)) {
+            return false;
+        }
+        break;
+    default:
+        break;
+    }
+
     return true;
 }
diff --git a/hw/remote/meson.build b/hw/remote/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/hw/remote/meson.build
+++ b/hw/remote/meson.build
@@ -XXX,XX +XXX,XX @@ remote_ss.add(when: 'CONFIG_MULTIPROCESS', if_true: files('mpqemu-link.c'))
 remote_ss.add(when: 'CONFIG_MULTIPROCESS', if_true: files('message.c'))
 remote_ss.add(when: 'CONFIG_MULTIPROCESS', if_true: files('remote-obj.c'))
 
+specific_ss.add(when: 'CONFIG_MULTIPROCESS', if_true: files('memory.c'))
+
 softmmu_ss.add_all(when: 'CONFIG_MULTIPROCESS', if_true: remote_ss)
-- 
2.29.2

From: Elena Ufimtseva <elena.ufimtseva@oracle.com>

Defines a PCI Device proxy object as a child of TYPE_PCI_DEVICE.

Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: b5186ebfedf8e557044d09a768846c59230ad3a7.1611938319.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 MAINTAINERS               |  2 +
 include/hw/remote/proxy.h | 33 +++++++++++++
 hw/remote/proxy.c         | 99 +++++++++++++++++++++++++++++++++++++++
 hw/remote/meson.build     |  1 +
 4 files changed, 135 insertions(+)
 create mode 100644 include/hw/remote/proxy.h
 create mode 100644 hw/remote/proxy.c

diff --git a/MAINTAINERS b/MAINTAINERS
index XXXXXXX..XXXXXXX 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -XXX,XX +XXX,XX @@ F: hw/remote/message.c
 F: hw/remote/remote-obj.c
 F: include/hw/remote/memory.h
 F: hw/remote/memory.c
+F: hw/remote/proxy.c
+F: include/hw/remote/proxy.h
 
 Build and test automation
 -------------------------
diff --git a/include/hw/remote/proxy.h b/include/hw/remote/proxy.h
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/include/hw/remote/proxy.h
@@ -XXX,XX +XXX,XX @@
+/*
+ * Copyright © 2018, 2021 Oracle and/or its affiliates.
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#ifndef PROXY_H
+#define PROXY_H
+
+#include "hw/pci/pci.h"
+#include "io/channel.h"
+
+#define TYPE_PCI_PROXY_DEV "x-pci-proxy-dev"
+OBJECT_DECLARE_SIMPLE_TYPE(PCIProxyDev, PCI_PROXY_DEV)
+
+struct PCIProxyDev {
+    PCIDevice parent_dev;
+    char *fd;
+
+    /*
+     * Mutex used to protect the QIOChannel fd from
+     * the concurrent access by the VCPUs since proxy
+     * blocks while awaiting for the replies from the
+     * process remote.
+     */
+    QemuMutex io_mutex;
+    QIOChannel *ioc;
+    Error *migration_blocker;
+};
+
+#endif /* PROXY_H */
diff --git a/hw/remote/proxy.c b/hw/remote/proxy.c
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/hw/remote/proxy.c
@@ -XXX,XX +XXX,XX @@
+/*
+ * Copyright © 2018, 2021 Oracle and/or its affiliates.
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#include "qemu/osdep.h"
+#include "qemu-common.h"
+
+#include "hw/remote/proxy.h"
+#include "hw/pci/pci.h"
+#include "qapi/error.h"
+#include "io/channel-util.h"
+#include "hw/qdev-properties.h"
+#include "monitor/monitor.h"
+#include "migration/blocker.h"
+#include "qemu/sockets.h"
+
+static void pci_proxy_dev_realize(PCIDevice *device, Error **errp)
+{
+    ERRP_GUARD();
+    PCIProxyDev *dev = PCI_PROXY_DEV(device);
+    int fd;
+
+    if (!dev->fd) {
+        error_setg(errp, "fd parameter not specified for %s",
+                   DEVICE(device)->id);
+        return;
+    }
+
+    fd = monitor_fd_param(monitor_cur(), dev->fd, errp);
+    if (fd == -1) {
+        error_prepend(errp, "proxy: unable to parse fd %s: ", dev->fd);
+        return;
+    }
+
+    if (!fd_is_socket(fd)) {
+        error_setg(errp, "proxy: fd %d is not a socket", fd);
+        close(fd);
+        return;
+    }
+
+    dev->ioc = qio_channel_new_fd(fd, errp);
+
+    error_setg(&dev->migration_blocker, "%s does not support migration",
+               TYPE_PCI_PROXY_DEV);
+    migrate_add_blocker(dev->migration_blocker, errp);
+
+    qemu_mutex_init(&dev->io_mutex);
+    qio_channel_set_blocking(dev->ioc, true, NULL);
+}
+
+static void pci_proxy_dev_exit(PCIDevice *pdev)
+{
+    PCIProxyDev *dev = PCI_PROXY_DEV(pdev);
+
+    if (dev->ioc) {
+        qio_channel_close(dev->ioc, NULL);
+    }
+
+    migrate_del_blocker(dev->migration_blocker);
+
+    error_free(dev->migration_blocker);
+}
+
+static Property proxy_properties[] = {
+    DEFINE_PROP_STRING("fd", PCIProxyDev, fd),
+    DEFINE_PROP_END_OF_LIST(),
+};
+
+static void pci_proxy_dev_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
+
+    k->realize = pci_proxy_dev_realize;
+    k->exit = pci_proxy_dev_exit;
+    device_class_set_props(dc, proxy_properties);
+}
+
+static const TypeInfo pci_proxy_dev_type_info = {
+    .name          = TYPE_PCI_PROXY_DEV,
+    .parent        = TYPE_PCI_DEVICE,
+    .instance_size = sizeof(PCIProxyDev),
+    .class_init    = pci_proxy_dev_class_init,
+    .interfaces = (InterfaceInfo[]) {
+        { INTERFACE_CONVENTIONAL_PCI_DEVICE },
+        { },
+    },
+};
+
+static void pci_proxy_dev_register_types(void)
+{
+    type_register_static(&pci_proxy_dev_type_info);
+}
+
+type_init(pci_proxy_dev_register_types)
diff --git a/hw/remote/meson.build b/hw/remote/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/hw/remote/meson.build
+++ b/hw/remote/meson.build
@@ -XXX,XX +XXX,XX @@ remote_ss.add(when: 'CONFIG_MULTIPROCESS', if_true: files('machine.c'))
 remote_ss.add(when: 'CONFIG_MULTIPROCESS', if_true: files('mpqemu-link.c'))
 remote_ss.add(when: 'CONFIG_MULTIPROCESS', if_true: files('message.c'))
 remote_ss.add(when: 'CONFIG_MULTIPROCESS', if_true: files('remote-obj.c'))
+remote_ss.add(when: 'CONFIG_MULTIPROCESS', if_true: files('proxy.c'))
 
 specific_ss.add(when: 'CONFIG_MULTIPROCESS', if_true: files('memory.c'))
 
-- 
2.29.2

From: Elena Ufimtseva <elena.ufimtseva@oracle.com>

Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: d54edb4176361eed86b903e8f27058363b6c83b3.1611938319.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 include/hw/remote/mpqemu-link.h |  4 ++++
 hw/remote/mpqemu-link.c         | 34 +++++++++++++++++++++++++++++++++
 2 files changed, 38 insertions(+)

diff --git a/include/hw/remote/mpqemu-link.h b/include/hw/remote/mpqemu-link.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/remote/mpqemu-link.h
+++ b/include/hw/remote/mpqemu-link.h
@@ -XXX,XX +XXX,XX @@
 #include "qemu/thread.h"
 #include "io/channel.h"
 #include "exec/hwaddr.h"
+#include "io/channel-socket.h"
+#include "hw/remote/proxy.h"
 
 #define REMOTE_MAX_FDS 8
 
@@ -XXX,XX +XXX,XX @@ typedef struct {
 bool mpqemu_msg_send(MPQemuMsg *msg, QIOChannel *ioc, Error **errp);
 bool mpqemu_msg_recv(MPQemuMsg *msg, QIOChannel *ioc, Error **errp);
 
+uint64_t mpqemu_msg_send_and_await_reply(MPQemuMsg *msg, PCIProxyDev *pdev,
+                                         Error **errp);
 bool mpqemu_msg_valid(MPQemuMsg *msg);
 
 #endif
diff --git a/hw/remote/mpqemu-link.c b/hw/remote/mpqemu-link.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/remote/mpqemu-link.c
+++ b/hw/remote/mpqemu-link.c
@@ -XXX,XX +XXX,XX @@ fail:
     return ret;
 }
 
+/*
+ * Send msg and wait for a reply with command code RET_MSG.
+ * Returns the message received of size u64 or UINT64_MAX
+ * on error.
+ * Called from VCPU thread in non-coroutine context.
+ * Used by the Proxy object to communicate to remote processes.
+ */
+uint64_t mpqemu_msg_send_and_await_reply(MPQemuMsg *msg, PCIProxyDev *pdev,
+                                         Error **errp)
+{
+    ERRP_GUARD();
+    MPQemuMsg msg_reply = {0};
+    uint64_t ret = UINT64_MAX;
+
+    assert(!qemu_in_coroutine());
+
+    QEMU_LOCK_GUARD(&pdev->io_mutex);
+    if (!mpqemu_msg_send(msg, pdev->ioc, errp)) {
+        return ret;
+    }
+
+    if (!mpqemu_msg_recv(&msg_reply, pdev->ioc, errp)) {
+        return ret;
+    }
+
+    if (!mpqemu_msg_valid(&msg_reply)) {
+        error_setg(errp, "ERROR: Invalid reply received for command %d",
+                         msg->cmd);
+        return ret;
+    }
+
+    return msg_reply.data.u64;
+}
+
 bool mpqemu_msg_valid(MPQemuMsg *msg)
 {
     if (msg->cmd >= MPQEMU_CMD_MAX && msg->cmd < 0) {
-- 
2.29.2

From: Elena Ufimtseva <elena.ufimtseva@oracle.com>

The Proxy Object sends the PCI config space accesses as messages
to the remote process over the communication channel

Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: d3c94f4618813234655356c60e6f0d0362ff42d6.1611938319.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 include/hw/remote/mpqemu-link.h | 10 ++++++
 hw/remote/message.c             | 60 +++++++++++++++++++++++++++++++++
 hw/remote/mpqemu-link.c         |  8 ++++-
 hw/remote/proxy.c               | 55 ++++++++++++++++++++++++++++++
 4 files changed, 132 insertions(+), 1 deletion(-)

diff --git a/include/hw/remote/mpqemu-link.h b/include/hw/remote/mpqemu-link.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/remote/mpqemu-link.h
+++ b/include/hw/remote/mpqemu-link.h
@@ -XXX,XX +XXX,XX @@
  */
 typedef enum {
     MPQEMU_CMD_SYNC_SYSMEM,
+    MPQEMU_CMD_RET,
+    MPQEMU_CMD_PCI_CFGWRITE,
+    MPQEMU_CMD_PCI_CFGREAD,
     MPQEMU_CMD_MAX,
 } MPQemuCmd;
 
@@ -XXX,XX +XXX,XX @@ typedef struct {
     off_t offsets[REMOTE_MAX_FDS];
 } SyncSysmemMsg;
 
+typedef struct {
+    uint32_t addr;
+    uint32_t val;
+    int len;
+} PciConfDataMsg;
+
 /**
  * MPQemuMsg:
  * @cmd: The remote command
@@ -XXX,XX +XXX,XX @@ typedef struct {
 
     union {
         uint64_t u64;
+        PciConfDataMsg pci_conf_data;
         SyncSysmemMsg sync_sysmem;
     } data;
 
diff --git a/hw/remote/message.c b/hw/remote/message.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/remote/message.c
+++ b/hw/remote/message.c
@@ -XXX,XX +XXX,XX @@
 #include "hw/remote/mpqemu-link.h"
 #include "qapi/error.h"
 #include "sysemu/runstate.h"
+#include "hw/pci/pci.h"
+
+static void process_config_write(QIOChannel *ioc, PCIDevice *dev,
+                                 MPQemuMsg *msg, Error **errp);
+static void process_config_read(QIOChannel *ioc, PCIDevice *dev,
+                                MPQemuMsg *msg, Error **errp);
 
 void coroutine_fn mpqemu_remote_msg_loop_co(void *data)
 {
@@ -XXX,XX +XXX,XX @@ void coroutine_fn mpqemu_remote_msg_loop_co(void *data)
         }
 
         switch (msg.cmd) {
+        case MPQEMU_CMD_PCI_CFGWRITE:
+            process_config_write(com->ioc, pci_dev, &msg, &local_err);
+            break;
+        case MPQEMU_CMD_PCI_CFGREAD:
+            process_config_read(com->ioc, pci_dev, &msg, &local_err);
+            break;
         default:
             error_setg(&local_err,
                        "Unknown command (%d) received for device %s"
@@ -XXX,XX +XXX,XX @@ void coroutine_fn mpqemu_remote_msg_loop_co(void *data)
         qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN);
     }
 }
+
+static void process_config_write(QIOChannel *ioc, PCIDevice *dev,
+                                 MPQemuMsg *msg, Error **errp)
+{
+    ERRP_GUARD();
+    PciConfDataMsg *conf = (PciConfDataMsg *)&msg->data.pci_conf_data;
+    MPQemuMsg ret = { 0 };
+
+    if ((conf->addr + sizeof(conf->val)) > pci_config_size(dev)) {
+        error_setg(errp, "Bad address for PCI config write, pid "FMT_pid".",
+                   getpid());
+        ret.data.u64 = UINT64_MAX;
+    } else {
+        pci_default_write_config(dev, conf->addr, conf->val, conf->len);
+    }
+
+    ret.cmd = MPQEMU_CMD_RET;
+    ret.size = sizeof(ret.data.u64);
+
+    if (!mpqemu_msg_send(&ret, ioc, NULL)) {
+        error_prepend(errp, "Error returning code to proxy, pid "FMT_pid": ",
+                      getpid());
+    }
+}
+
+static void process_config_read(QIOChannel *ioc, PCIDevice *dev,
+                                MPQemuMsg *msg, Error **errp)
+{
+    ERRP_GUARD();
+    PciConfDataMsg *conf = (PciConfDataMsg *)&msg->data.pci_conf_data;
+    MPQemuMsg ret = { 0 };
+
+    if ((conf->addr + sizeof(conf->val)) > pci_config_size(dev)) {
+        error_setg(errp, "Bad address for PCI config read, pid "FMT_pid".",
+                   getpid());
+        ret.data.u64 = UINT64_MAX;
+    } else {
+        ret.data.u64 = pci_default_read_config(dev, conf->addr, conf->len);
+    }
+
+    ret.cmd = MPQEMU_CMD_RET;
+    ret.size = sizeof(ret.data.u64);
+
+    if (!mpqemu_msg_send(&ret, ioc, NULL)) {
+        error_prepend(errp, "Error returning code to proxy, pid "FMT_pid": ",
+                      getpid());
+    }
+}
diff --git a/hw/remote/mpqemu-link.c b/hw/remote/mpqemu-link.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/remote/mpqemu-link.c
+++ b/hw/remote/mpqemu-link.c
@@ -XXX,XX +XXX,XX @@ uint64_t mpqemu_msg_send_and_await_reply(MPQemuMsg *msg, PCIProxyDev *pdev,
         return ret;
     }
 
-    if (!mpqemu_msg_valid(&msg_reply)) {
+    if (!mpqemu_msg_valid(&msg_reply) || msg_reply.cmd != MPQEMU_CMD_RET) {
         error_setg(errp, "ERROR: Invalid reply received for command %d",
                          msg->cmd);
         return ret;
@@ -XXX,XX +XXX,XX @@ bool mpqemu_msg_valid(MPQemuMsg *msg)
             return false;
         }
         break;
+    case MPQEMU_CMD_PCI_CFGWRITE:
+    case MPQEMU_CMD_PCI_CFGREAD:
+        if (msg->size != sizeof(PciConfDataMsg)) {
+            return false;
+        }
+        break;
     default:
         break;
     }
diff --git a/hw/remote/proxy.c b/hw/remote/proxy.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/remote/proxy.c
+++ b/hw/remote/proxy.c
@@ -XXX,XX +XXX,XX @@
 #include "monitor/monitor.h"
 #include "migration/blocker.h"
 #include "qemu/sockets.h"
+#include "hw/remote/mpqemu-link.h"
+#include "qemu/error-report.h"
 
 static void pci_proxy_dev_realize(PCIDevice *device, Error **errp)
 {
@@ -XXX,XX +XXX,XX @@ static void pci_proxy_dev_exit(PCIDevice *pdev)
     error_free(dev->migration_blocker);
 }
 
+static void config_op_send(PCIProxyDev *pdev, uint32_t addr, uint32_t *val,
+                           int len, unsigned int op)
+{
+    MPQemuMsg msg = { 0 };
+    uint64_t ret = -EINVAL;
+    Error *local_err = NULL;
+
+    msg.cmd = op;
+    msg.data.pci_conf_data.addr = addr;
+    msg.data.pci_conf_data.val = (op == MPQEMU_CMD_PCI_CFGWRITE) ? *val : 0;
+    msg.data.pci_conf_data.len = len;
+    msg.size = sizeof(PciConfDataMsg);
+
+    ret = mpqemu_msg_send_and_await_reply(&msg, pdev, &local_err);
+    if (local_err) {
+        error_report_err(local_err);
+    }
+
+    if (ret == UINT64_MAX) {
+        error_report("Failed to perform PCI config %s operation",
+                     (op == MPQEMU_CMD_PCI_CFGREAD) ? "READ" : "WRITE");
+    }
+
+    if (op == MPQEMU_CMD_PCI_CFGREAD) {
+        *val = (uint32_t)ret;
+    }
+}
+
+static uint32_t pci_proxy_read_config(PCIDevice *d, uint32_t addr, int len)
+{
+    uint32_t val;
+
+    config_op_send(PCI_PROXY_DEV(d), addr, &val, len, MPQEMU_CMD_PCI_CFGREAD);
+
+    return val;
+}
+
+static void pci_proxy_write_config(PCIDevice *d, uint32_t addr, uint32_t val,
+                                   int len)
+{
+    /*
+     * Some of the functions access the copy of remote device's PCI config
+     * space which is cached in the proxy device. Therefore, maintain
+     * it updated.
+     */
+    pci_default_write_config(d, addr, val, len);
+
+    config_op_send(PCI_PROXY_DEV(d), addr, &val, len, MPQEMU_CMD_PCI_CFGWRITE);
+}
+
 static Property proxy_properties[] = {
     DEFINE_PROP_STRING("fd", PCIProxyDev, fd),
     DEFINE_PROP_END_OF_LIST(),
@@ -XXX,XX +XXX,XX @@ static void pci_proxy_dev_class_init(ObjectClass *klass, void *data)
 
     k->realize = pci_proxy_dev_realize;
     k->exit = pci_proxy_dev_exit;
+    k->config_read = pci_proxy_read_config;
+    k->config_write = pci_proxy_write_config;
+
     device_class_set_props(dc, proxy_properties);
 }
 
-- 
2.29.2

From: Jagannathan Raman <jag.raman@oracle.com>

Proxy device object implements handler for PCI BAR writes and reads.
The handler uses BAR_WRITE/BAR_READ message to communicate to the
remote process with the BAR address and value to be written/read.
The remote process implements handler for BAR_WRITE/BAR_READ
message.

Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: a8b76714a9688be5552c4c92d089bc9e8a4707ff.1611938319.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 include/hw/remote/mpqemu-link.h | 10 ++++
 include/hw/remote/proxy.h       |  9 ++++
 hw/remote/message.c             | 83 +++++++++++++++++++++++++++++++++
 hw/remote/mpqemu-link.c         |  6 +++
 hw/remote/proxy.c               | 60 ++++++++++++++++++++++++
 5 files changed, 168 insertions(+)

diff --git a/include/hw/remote/mpqemu-link.h b/include/hw/remote/mpqemu-link.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/remote/mpqemu-link.h
+++ b/include/hw/remote/mpqemu-link.h
@@ -XXX,XX +XXX,XX @@ typedef enum {
     MPQEMU_CMD_RET,
     MPQEMU_CMD_PCI_CFGWRITE,
     MPQEMU_CMD_PCI_CFGREAD,
+    MPQEMU_CMD_BAR_WRITE,
+    MPQEMU_CMD_BAR_READ,
     MPQEMU_CMD_MAX,
 } MPQemuCmd;
 
@@ -XXX,XX +XXX,XX @@ typedef struct {
     int len;
 } PciConfDataMsg;
 
+typedef struct {
+    hwaddr addr;
+    uint64_t val;
+    unsigned size;
+    bool memory;
+} BarAccessMsg;
+
 /**
  * MPQemuMsg:
  * @cmd: The remote command
@@ -XXX,XX +XXX,XX @@ typedef struct {
         uint64_t u64;
         PciConfDataMsg pci_conf_data;
         SyncSysmemMsg sync_sysmem;
+        BarAccessMsg bar_access;
     } data;
 
     int fds[REMOTE_MAX_FDS];
diff --git a/include/hw/remote/proxy.h b/include/hw/remote/proxy.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/remote/proxy.h
+++ b/include/hw/remote/proxy.h
@@ -XXX,XX +XXX,XX @@
 #define TYPE_PCI_PROXY_DEV "x-pci-proxy-dev"
 OBJECT_DECLARE_SIMPLE_TYPE(PCIProxyDev, PCI_PROXY_DEV)
 
+typedef struct ProxyMemoryRegion {
+    PCIProxyDev *dev;
+    MemoryRegion mr;
+    bool memory;
+    bool present;
+    uint8_t type;
+} ProxyMemoryRegion;
+
 struct PCIProxyDev {
     PCIDevice parent_dev;
     char *fd;
@@ -XXX,XX +XXX,XX @@ struct PCIProxyDev {
     QemuMutex io_mutex;
     QIOChannel *ioc;
     Error *migration_blocker;
+    ProxyMemoryRegion region[PCI_NUM_REGIONS];
 };
 
 #endif /* PROXY_H */
diff --git a/hw/remote/message.c b/hw/remote/message.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/remote/message.c
+++ b/hw/remote/message.c
@@ -XXX,XX +XXX,XX @@
 #include "qapi/error.h"
 #include "sysemu/runstate.h"
 #include "hw/pci/pci.h"
+#include "exec/memattrs.h"
 
 static void process_config_write(QIOChannel *ioc, PCIDevice *dev,
                                  MPQemuMsg *msg, Error **errp);
 static void process_config_read(QIOChannel *ioc, PCIDevice *dev,
                                 MPQemuMsg *msg, Error **errp);
+static void process_bar_write(QIOChannel *ioc, MPQemuMsg *msg, Error **errp);
+static void process_bar_read(QIOChannel *ioc, MPQemuMsg *msg, Error **errp);
 
 void coroutine_fn mpqemu_remote_msg_loop_co(void *data)
 {
@@ -XXX,XX +XXX,XX @@ void coroutine_fn mpqemu_remote_msg_loop_co(void *data)
         case MPQEMU_CMD_PCI_CFGREAD:
             process_config_read(com->ioc, pci_dev, &msg, &local_err);
             break;
+        case MPQEMU_CMD_BAR_WRITE:
+            process_bar_write(com->ioc, &msg, &local_err);
+            break;
+        case MPQEMU_CMD_BAR_READ:
+            process_bar_read(com->ioc, &msg, &local_err);
+            break;
         default:
             error_setg(&local_err,
                        "Unknown command (%d) received for device %s"
@@ -XXX,XX +XXX,XX @@ static void process_config_read(QIOChannel *ioc, PCIDevice *dev,
                       getpid());
     }
 }
+
+static void process_bar_write(QIOChannel *ioc, MPQemuMsg *msg, Error **errp)
+{
+    ERRP_GUARD();
+    BarAccessMsg *bar_access = &msg->data.bar_access;
+    AddressSpace *as =
+        bar_access->memory ? &address_space_memory : &address_space_io;
+    MPQemuMsg ret = { 0 };
+    MemTxResult res;
+    uint64_t val;
+
+    if (!is_power_of_2(bar_access->size) ||
+       (bar_access->size > sizeof(uint64_t))) {
+        ret.data.u64 = UINT64_MAX;
+        goto fail;
+    }
+
+    val = cpu_to_le64(bar_access->val);
+
+    res = address_space_rw(as, bar_access->addr, MEMTXATTRS_UNSPECIFIED,
+                           (void *)&val, bar_access->size, true);
+
+    if (res != MEMTX_OK) {
+        error_setg(errp, "Bad address %"PRIx64" for mem write, pid "FMT_pid".",
+                   bar_access->addr, getpid());
+        ret.data.u64 = -1;
+    }
+
+fail:
+    ret.cmd = MPQEMU_CMD_RET;
+    ret.size = sizeof(ret.data.u64);
+
+    if (!mpqemu_msg_send(&ret, ioc, NULL)) {
+        error_prepend(errp, "Error returning code to proxy, pid "FMT_pid": ",
+                      getpid());
+    }
+}
+
+static void process_bar_read(QIOChannel *ioc, MPQemuMsg *msg, Error **errp)
+{
+    ERRP_GUARD();
+    BarAccessMsg *bar_access = &msg->data.bar_access;
+    MPQemuMsg ret = { 0 };
+    AddressSpace *as;
+    MemTxResult res;
+    uint64_t val = 0;
+
+    as = bar_access->memory ? &address_space_memory : &address_space_io;
+
+    if (!is_power_of_2(bar_access->size) ||
+       (bar_access->size > sizeof(uint64_t))) {
+        val = UINT64_MAX;
+        goto fail;
+    }
+
+    res = address_space_rw(as, bar_access->addr, MEMTXATTRS_UNSPECIFIED,
+                           (void *)&val, bar_access->size, false);
+
+    if (res != MEMTX_OK) {
+        error_setg(errp, "Bad address %"PRIx64" for mem read, pid "FMT_pid".",
+                   bar_access->addr, getpid());
+        val = UINT64_MAX;
+    }
+
+fail:
+    ret.cmd = MPQEMU_CMD_RET;
+    ret.data.u64 = le64_to_cpu(val);
+    ret.size = sizeof(ret.data.u64);
+
+    if (!mpqemu_msg_send(&ret, ioc, NULL)) {
+        error_prepend(errp, "Error returning code to proxy, pid "FMT_pid": ",
+                      getpid());
+    }
+}
diff --git a/hw/remote/mpqemu-link.c b/hw/remote/mpqemu-link.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/remote/mpqemu-link.c
+++ b/hw/remote/mpqemu-link.c
@@ -XXX,XX +XXX,XX @@ bool mpqemu_msg_valid(MPQemuMsg *msg)
             return false;
         }
         break;
+    case MPQEMU_CMD_BAR_WRITE:
+    case MPQEMU_CMD_BAR_READ:
+        if ((msg->size != sizeof(BarAccessMsg)) || (msg->num_fds != 0)) {
+            return false;
+        }
+        break;
     default:
         break;
     }
diff --git a/hw/remote/proxy.c b/hw/remote/proxy.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/remote/proxy.c
+++ b/hw/remote/proxy.c
@@ -XXX,XX +XXX,XX @@ static void pci_proxy_dev_register_types(void)
 }
 
 type_init(pci_proxy_dev_register_types)
+
+static void send_bar_access_msg(PCIProxyDev *pdev, MemoryRegion *mr,
+                                bool write, hwaddr addr, uint64_t *val,
+                                unsigned size, bool memory)
+{
+    MPQemuMsg msg = { 0 };
+    long ret = -EINVAL;
+    Error *local_err = NULL;
+
+    msg.size = sizeof(BarAccessMsg);
+    msg.data.bar_access.addr = mr->addr + addr;
+    msg.data.bar_access.size = size;
+    msg.data.bar_access.memory = memory;
+
+    if (write) {
+        msg.cmd = MPQEMU_CMD_BAR_WRITE;
+        msg.data.bar_access.val = *val;
+    } else {
+        msg.cmd = MPQEMU_CMD_BAR_READ;
+    }
+
+    ret = mpqemu_msg_send_and_await_reply(&msg, pdev, &local_err);
+    if (local_err) {
+        error_report_err(local_err);
+    }
+
+    if (!write) {
+        *val = ret;
+    }
+}
+
+static void proxy_bar_write(void *opaque, hwaddr addr, uint64_t val,
+                            unsigned size)
+{
+    ProxyMemoryRegion *pmr = opaque;
+
+    send_bar_access_msg(pmr->dev, &pmr->mr, true, addr, &val, size,
+                        pmr->memory);
+}
+
+static uint64_t proxy_bar_read(void *opaque, hwaddr addr, unsigned size)
+{
+    ProxyMemoryRegion *pmr = opaque;
+    uint64_t val;
+
+    send_bar_access_msg(pmr->dev, &pmr->mr, false, addr, &val, size,
+                        pmr->memory);
+
+    return val;
+}
+
+const MemoryRegionOps proxy_mr_ops = {
+    .read = proxy_bar_read,
+    .write = proxy_bar_write,
+    .endianness = DEVICE_NATIVE_ENDIAN,
+    .impl = {
+        .min_access_size = 1,
+        .max_access_size = 8,
+    },
+};
-- 
2.29.2

From: Jagannathan Raman <jag.raman@oracle.com>

Add ProxyMemoryListener object which is used to keep the view of the RAM
in sync between QEMU and remote process.
A MemoryListener is registered for system-memory AddressSpace. The
listener sends SYNC_SYSMEM message to the remote process when memory
listener commits the changes to memory, the remote process receives
the message and processes it in the handler for SYNC_SYSMEM message.

Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 04fe4e6a9ca90d4f11ab6f59be7652f5b086a071.1611938319.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 MAINTAINERS                               |   2 +
 include/hw/remote/proxy-memory-listener.h |  28 +++
 include/hw/remote/proxy.h                 |   2 +
 hw/remote/message.c                       |   4 +
 hw/remote/proxy-memory-listener.c         | 227 ++++++++++++++++++++++
 hw/remote/proxy.c                         |   6 +
 hw/remote/meson.build                     |   1 +
 7 files changed, 270 insertions(+)
 create mode 100644 include/hw/remote/proxy-memory-listener.h
 create mode 100644 hw/remote/proxy-memory-listener.c

diff --git a/MAINTAINERS b/MAINTAINERS
index XXXXXXX..XXXXXXX 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -XXX,XX +XXX,XX @@ F: include/hw/remote/memory.h
 F: hw/remote/memory.c
 F: hw/remote/proxy.c
 F: include/hw/remote/proxy.h
+F: hw/remote/proxy-memory-listener.c
+F: include/hw/remote/proxy-memory-listener.h
 
 Build and test automation
 -------------------------
diff --git a/include/hw/remote/proxy-memory-listener.h b/include/hw/remote/proxy-memory-listener.h
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/include/hw/remote/proxy-memory-listener.h
@@ -XXX,XX +XXX,XX @@
+/*
+ * Copyright © 2018, 2021 Oracle and/or its affiliates.
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#ifndef PROXY_MEMORY_LISTENER_H
+#define PROXY_MEMORY_LISTENER_H
+
+#include "exec/memory.h"
+#include "io/channel.h"
+
+typedef struct ProxyMemoryListener {
+    MemoryListener listener;
+
+    int n_mr_sections;
+    MemoryRegionSection *mr_sections;
+
+    QIOChannel *ioc;
+} ProxyMemoryListener;
+
+void proxy_memory_listener_configure(ProxyMemoryListener *proxy_listener,
+                                     QIOChannel *ioc);
+void proxy_memory_listener_deconfigure(ProxyMemoryListener *proxy_listener);
+
+#endif
diff --git a/include/hw/remote/proxy.h b/include/hw/remote/proxy.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/remote/proxy.h
+++ b/include/hw/remote/proxy.h
@@ -XXX,XX +XXX,XX @@
 
 #include "hw/pci/pci.h"
 #include "io/channel.h"
+#include "hw/remote/proxy-memory-listener.h"
 
 #define TYPE_PCI_PROXY_DEV "x-pci-proxy-dev"
 OBJECT_DECLARE_SIMPLE_TYPE(PCIProxyDev, PCI_PROXY_DEV)
@@ -XXX,XX +XXX,XX @@ struct PCIProxyDev {
     QemuMutex io_mutex;
     QIOChannel *ioc;
     Error *migration_blocker;
+    ProxyMemoryListener proxy_listener;
     ProxyMemoryRegion region[PCI_NUM_REGIONS];
 };
 
diff --git a/hw/remote/message.c b/hw/remote/message.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/remote/message.c
+++ b/hw/remote/message.c
@@ -XXX,XX +XXX,XX @@
 #include "sysemu/runstate.h"
 #include "hw/pci/pci.h"
 #include "exec/memattrs.h"
+#include "hw/remote/memory.h"
 
 static void process_config_write(QIOChannel *ioc, PCIDevice *dev,
                                  MPQemuMsg *msg, Error **errp);
@@ -XXX,XX +XXX,XX @@ void coroutine_fn mpqemu_remote_msg_loop_co(void *data)
         case MPQEMU_CMD_BAR_READ:
             process_bar_read(com->ioc, &msg, &local_err);
             break;
+        case MPQEMU_CMD_SYNC_SYSMEM:
+            remote_sysmem_reconfig(&msg, &local_err);
+            break;
         default:
             error_setg(&local_err,
                        "Unknown command (%d) received for device %s"
diff --git a/hw/remote/proxy-memory-listener.c b/hw/remote/proxy-memory-listener.c
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/hw/remote/proxy-memory-listener.c
@@ -XXX,XX +XXX,XX @@
+/*
+ * Copyright © 2018, 2021 Oracle and/or its affiliates.
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#include "qemu/osdep.h"
+#include "qemu-common.h"
+
+#include "qemu/compiler.h"
+#include "qemu/int128.h"
+#include "qemu/range.h"
+#include "exec/memory.h"
+#include "exec/cpu-common.h"
+#include "cpu.h"
+#include "exec/ram_addr.h"
+#include "exec/address-spaces.h"
+#include "qapi/error.h"
+#include "hw/remote/mpqemu-link.h"
+#include "hw/remote/proxy-memory-listener.h"
+
+/*
+ * TODO: get_fd_from_hostaddr(), proxy_mrs_can_merge() and
+ * proxy_memory_listener_commit() defined below perform tasks similar to the
+ * functions defined in vhost-user.c. These functions are good candidates
+ * for refactoring.
+ *
+ */
+
+static void proxy_memory_listener_reset(MemoryListener *listener)
+{
+    ProxyMemoryListener *proxy_listener = container_of(listener,
+                                                       ProxyMemoryListener,
+                                                       listener);
+    int mrs;
+
+    for (mrs = 0; mrs < proxy_listener->n_mr_sections; mrs++) {
+        memory_region_unref(proxy_listener->mr_sections[mrs].mr);
+    }
+
+    g_free(proxy_listener->mr_sections);
+    proxy_listener->mr_sections = NULL;
+    proxy_listener->n_mr_sections = 0;
+}
+
+static int get_fd_from_hostaddr(uint64_t host, ram_addr_t *offset)
+{
+    MemoryRegion *mr;
+    ram_addr_t off;
+
+    /**
+     * Assumes that the host address is a valid address as it's
+     * coming from the MemoryListener system. In the case host
+     * address is not valid, the following call would return
+     * the default subregion of "system_memory" region, and
+     * not NULL. So it's not possible to check for NULL here.
+     */
+    mr = memory_region_from_host((void *)(uintptr_t)host, &off);
+
+    if (offset) {
+        *offset = off;
+    }
+
+    return memory_region_get_fd(mr);
+}
+
+static bool proxy_mrs_can_merge(uint64_t host, uint64_t prev_host, size_t size)
+{
+    if (((prev_host + size) != host)) {
+        return false;
+    }
+
+    if (get_fd_from_hostaddr(host, NULL) !=
+            get_fd_from_hostaddr(prev_host, NULL)) {
+        return false;
+    }
+
+    return true;
+}
+
+static bool try_merge(ProxyMemoryListener *proxy_listener,
+                      MemoryRegionSection *section)
+{
+    uint64_t mrs_size, mrs_gpa, mrs_page;
+    MemoryRegionSection *prev_sec;
+    bool merged = false;
+    uintptr_t mrs_host;
+    RAMBlock *mrs_rb;
+
+    if (!proxy_listener->n_mr_sections) {
+        return false;
+    }
+
+    mrs_rb = section->mr->ram_block;
+    mrs_page = (uint64_t)qemu_ram_pagesize(mrs_rb);
+    mrs_size = int128_get64(section->size);
+    mrs_gpa = section->offset_within_address_space;
+    mrs_host = (uintptr_t)memory_region_get_ram_ptr(section->mr) +
+               section->offset_within_region;
+
+    if (get_fd_from_hostaddr(mrs_host, NULL) < 0) {
+        return true;
+    }
+
+    mrs_host = mrs_host & ~(mrs_page - 1);
+    mrs_gpa = mrs_gpa & ~(mrs_page - 1);
+    mrs_size = ROUND_UP(mrs_size, mrs_page);
+
+    prev_sec = proxy_listener->mr_sections +
+               (proxy_listener->n_mr_sections - 1);
+    uint64_t prev_gpa_start = prev_sec->offset_within_address_space;
+    uint64_t prev_size = int128_get64(prev_sec->size);
+    uint64_t prev_gpa_end   = range_get_last(prev_gpa_start, prev_size);
+    uint64_t prev_host_start =
+        (uintptr_t)memory_region_get_ram_ptr(prev_sec->mr) +
+        prev_sec->offset_within_region;
+    uint64_t prev_host_end = range_get_last(prev_host_start, prev_size);
+
+    if (mrs_gpa <= (prev_gpa_end + 1)) {
+        g_assert(mrs_gpa > prev_gpa_start);
+
+        if ((section->mr == prev_sec->mr) &&
+            proxy_mrs_can_merge(mrs_host, prev_host_start,
+                                (mrs_gpa - prev_gpa_start))) {
+            uint64_t max_end = MAX(prev_host_end, mrs_host + mrs_size);
+            merged = true;
+            prev_sec->offset_within_address_space =
+                MIN(prev_gpa_start, mrs_gpa);
+            prev_sec->offset_within_region =
+                MIN(prev_host_start, mrs_host) -
+                (uintptr_t)memory_region_get_ram_ptr(prev_sec->mr);
+            prev_sec->size = int128_make64(max_end - MIN(prev_host_start,
+                                                         mrs_host));
+        }
+    }
+
+    return merged;
+}
+
+static void proxy_memory_listener_region_addnop(MemoryListener *listener,
+                                                MemoryRegionSection *section)
+{
+    ProxyMemoryListener *proxy_listener = container_of(listener,
+                                                       ProxyMemoryListener,
+                                                       listener);
+
+    if (!memory_region_is_ram(section->mr) ||
+            memory_region_is_rom(section->mr)) {
+        return;
+    }
+
+    if (try_merge(proxy_listener, section)) {
+        return;
+    }
+
+    ++proxy_listener->n_mr_sections;
+    proxy_listener->mr_sections = g_renew(MemoryRegionSection,
+                                          proxy_listener->mr_sections,
+                                          proxy_listener->n_mr_sections);
+    proxy_listener->mr_sections[proxy_listener->n_mr_sections - 1] = *section;
+    proxy_listener->mr_sections[proxy_listener->n_mr_sections - 1].fv = NULL;
+    memory_region_ref(section->mr);
+}
+
+static void proxy_memory_listener_commit(MemoryListener *listener)
+{
+    ProxyMemoryListener *proxy_listener = container_of(listener,
+                                                       ProxyMemoryListener,
+                                                       listener);
+    MPQemuMsg msg;
+    MemoryRegionSection *section;
+    ram_addr_t offset;
+    uintptr_t host_addr;
+    int region;
+    Error *local_err = NULL;
+
+    memset(&msg, 0, sizeof(MPQemuMsg));
+
+    msg.cmd = MPQEMU_CMD_SYNC_SYSMEM;
+    msg.num_fds = proxy_listener->n_mr_sections;
+    msg.size = sizeof(SyncSysmemMsg);
+    if (msg.num_fds > REMOTE_MAX_FDS) {
+        error_report("Number of fds is more than %d", REMOTE_MAX_FDS);
+        return;
+    }
+
+    for (region = 0; region < proxy_listener->n_mr_sections; region++) {
+        section = &proxy_listener->mr_sections[region];
+        msg.data.sync_sysmem.gpas[region] =
+            section->offset_within_address_space;
+        msg.data.sync_sysmem.sizes[region] = int128_get64(section->size);
+        host_addr = (uintptr_t)memory_region_get_ram_ptr(section->mr) +
+                    section->offset_within_region;
+        msg.fds[region] = get_fd_from_hostaddr(host_addr, &offset);
+        msg.data.sync_sysmem.offsets[region] = offset;
+    }
+    if (!mpqemu_msg_send(&msg, proxy_listener->ioc, &local_err)) {
+        error_report_err(local_err);
+    }
+}
+
+void proxy_memory_listener_deconfigure(ProxyMemoryListener *proxy_listener)
+{
+    memory_listener_unregister(&proxy_listener->listener);
+
+    proxy_memory_listener_reset(&proxy_listener->listener);
+}
+
+void proxy_memory_listener_configure(ProxyMemoryListener *proxy_listener,
+                                     QIOChannel *ioc)
+{
+    proxy_listener->n_mr_sections = 0;
+    proxy_listener->mr_sections = NULL;
+
+    proxy_listener->ioc = ioc;
+
+    proxy_listener->listener.begin = proxy_memory_listener_reset;
+    proxy_listener->listener.commit = proxy_memory_listener_commit;
+    proxy_listener->listener.region_add = proxy_memory_listener_region_addnop;
+    proxy_listener->listener.region_nop = proxy_memory_listener_region_addnop;
+    proxy_listener->listener.priority = 10;
+
+    memory_listener_register(&proxy_listener->listener,
+                             &address_space_memory);
+}
diff --git a/hw/remote/proxy.c b/hw/remote/proxy.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/remote/proxy.c
+++ b/hw/remote/proxy.c
@@ -XXX,XX +XXX,XX @@
 #include "qemu/sockets.h"
 #include "hw/remote/mpqemu-link.h"
 #include "qemu/error-report.h"
+#include "hw/remote/proxy-memory-listener.h"
+#include "qom/object.h"
 
 static void pci_proxy_dev_realize(PCIDevice *device, Error **errp)
 {
@@ -XXX,XX +XXX,XX @@ static void pci_proxy_dev_realize(PCIDevice *device, Error **errp)
 
     qemu_mutex_init(&dev->io_mutex);
     qio_channel_set_blocking(dev->ioc, true, NULL);
+
+    proxy_memory_listener_configure(&dev->proxy_listener, dev->ioc);
 }
 
 static void pci_proxy_dev_exit(PCIDevice *pdev)
@@ -XXX,XX +XXX,XX @@ static void pci_proxy_dev_exit(PCIDevice *pdev)
     migrate_del_blocker(dev->migration_blocker);
 
     error_free(dev->migration_blocker);
+
+    proxy_memory_listener_deconfigure(&dev->proxy_listener);
 }
 
 static void config_op_send(PCIProxyDev *pdev, uint32_t addr, uint32_t *val,
diff --git a/hw/remote/meson.build b/hw/remote/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/hw/remote/meson.build
+++ b/hw/remote/meson.build
@@ -XXX,XX +XXX,XX @@ remote_ss.add(when: 'CONFIG_MULTIPROCESS', if_true: files('remote-obj.c'))
 remote_ss.add(when: 'CONFIG_MULTIPROCESS', if_true: files('proxy.c'))
 
 specific_ss.add(when: 'CONFIG_MULTIPROCESS', if_true: files('memory.c'))
+specific_ss.add(when: 'CONFIG_MULTIPROCESS', if_true: files('proxy-memory-listener.c'))
 
 softmmu_ss.add_all(when: 'CONFIG_MULTIPROCESS', if_true: remote_ss)
-- 
2.29.2

From: Jagannathan Raman <jag.raman@oracle.com>

IOHUB object is added to manage PCI IRQs. It uses KVM_IRQFD
ioctl to create irqfd to injecting PCI interrupts to the guest.
IOHUB object forwards the irqfd to the remote process. Remote process
uses this fd to directly send interrupts to the guest, bypassing QEMU.

Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 51d5c3d54e28a68b002e3875c59599c9f5a424a1.1611938319.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 MAINTAINERS                     |   2 +
 include/hw/pci/pci_ids.h        |   3 +
 include/hw/remote/iohub.h       |  42 +++++++++++
 include/hw/remote/machine.h     |   2 +
 include/hw/remote/mpqemu-link.h |   1 +
 include/hw/remote/proxy.h       |   4 ++
 hw/remote/iohub.c               | 119 ++++++++++++++++++++++++++++++++
 hw/remote/machine.c             |  10 +++
 hw/remote/message.c             |   4 ++
 hw/remote/mpqemu-link.c         |   5 ++
 hw/remote/proxy.c               |  56 +++++++++++++++
 hw/remote/meson.build           |   1 +
 12 files changed, 249 insertions(+)
 create mode 100644 include/hw/remote/iohub.h
 create mode 100644 hw/remote/iohub.c

diff --git a/MAINTAINERS b/MAINTAINERS
index XXXXXXX..XXXXXXX 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -XXX,XX +XXX,XX @@ F: hw/remote/proxy.c
 F: include/hw/remote/proxy.h
 F: hw/remote/proxy-memory-listener.c
 F: include/hw/remote/proxy-memory-listener.h
+F: hw/remote/iohub.c
+F: include/hw/remote/iohub.h
 
 Build and test automation
 -------------------------
diff --git a/include/hw/pci/pci_ids.h b/include/hw/pci/pci_ids.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/pci/pci_ids.h
+++ b/include/hw/pci/pci_ids.h
@@ -XXX,XX +XXX,XX @@
 #define PCI_DEVICE_ID_SUN_SIMBA          0x5000
 #define PCI_DEVICE_ID_SUN_SABRE          0xa000
 
+#define PCI_VENDOR_ID_ORACLE             0x108e
+#define PCI_DEVICE_ID_REMOTE_IOHUB       0xb000
+
 #define PCI_VENDOR_ID_CMD                0x1095
 #define PCI_DEVICE_ID_CMD_646            0x0646
 
diff --git a/include/hw/remote/iohub.h b/include/hw/remote/iohub.h
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/include/hw/remote/iohub.h
@@ -XXX,XX +XXX,XX @@
+/*
+ * IO Hub for remote device
+ *
+ * Copyright © 2018, 2021 Oracle and/or its affiliates.
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#ifndef REMOTE_IOHUB_H
+#define REMOTE_IOHUB_H
+
+#include "hw/pci/pci.h"
+#include "qemu/event_notifier.h"
+#include "qemu/thread-posix.h"
+#include "hw/remote/mpqemu-link.h"
+
+#define REMOTE_IOHUB_NB_PIRQS    PCI_DEVFN_MAX
+
+typedef struct ResampleToken {
+    void *iohub;
+    int pirq;
+} ResampleToken;
+
+typedef struct RemoteIOHubState {
+    PCIDevice d;
+    EventNotifier irqfds[REMOTE_IOHUB_NB_PIRQS];
+    EventNotifier resamplefds[REMOTE_IOHUB_NB_PIRQS];
+    unsigned int irq_level[REMOTE_IOHUB_NB_PIRQS];
+    ResampleToken token[REMOTE_IOHUB_NB_PIRQS];
+    QemuMutex irq_level_lock[REMOTE_IOHUB_NB_PIRQS];
+} RemoteIOHubState;
+
+int remote_iohub_map_irq(PCIDevice *pci_dev, int intx);
+void remote_iohub_set_irq(void *opaque, int pirq, int level);
+void process_set_irqfd_msg(PCIDevice *pci_dev, MPQemuMsg *msg);
+
+void remote_iohub_init(RemoteIOHubState *iohub);
+void remote_iohub_finalize(RemoteIOHubState *iohub);
+
+#endif
diff --git a/include/hw/remote/machine.h b/include/hw/remote/machine.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/remote/machine.h
+++ b/include/hw/remote/machine.h
@@ -XXX,XX +XXX,XX @@
 #include "hw/boards.h"
 #include "hw/pci-host/remote.h"
 #include "io/channel.h"
+#include "hw/remote/iohub.h"
 
 struct RemoteMachineState {
     MachineState parent_obj;
 
     RemotePCIHost *host;
+    RemoteIOHubState iohub;
 };
 
 /* Used to pass to co-routine device and ioc. */
diff --git a/include/hw/remote/mpqemu-link.h b/include/hw/remote/mpqemu-link.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/remote/mpqemu-link.h
+++ b/include/hw/remote/mpqemu-link.h
@@ -XXX,XX +XXX,XX @@ typedef enum {
     MPQEMU_CMD_PCI_CFGREAD,
     MPQEMU_CMD_BAR_WRITE,
     MPQEMU_CMD_BAR_READ,
+    MPQEMU_CMD_SET_IRQFD,
     MPQEMU_CMD_MAX,
 } MPQemuCmd;
 
diff --git a/include/hw/remote/proxy.h b/include/hw/remote/proxy.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/remote/proxy.h
+++ b/include/hw/remote/proxy.h
@@ -XXX,XX +XXX,XX @@
 #include "hw/pci/pci.h"
 #include "io/channel.h"
 #include "hw/remote/proxy-memory-listener.h"
+#include "qemu/event_notifier.h"
 
 #define TYPE_PCI_PROXY_DEV "x-pci-proxy-dev"
 OBJECT_DECLARE_SIMPLE_TYPE(PCIProxyDev, PCI_PROXY_DEV)
@@ -XXX,XX +XXX,XX @@ struct PCIProxyDev {
     QIOChannel *ioc;
     Error *migration_blocker;
     ProxyMemoryListener proxy_listener;
+    int virq;
+    EventNotifier intr;
+    EventNotifier resample;
     ProxyMemoryRegion region[PCI_NUM_REGIONS];
 };
 
diff --git a/hw/remote/iohub.c b/hw/remote/iohub.c
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/hw/remote/iohub.c
@@ -XXX,XX +XXX,XX @@
+/*
+ * Remote IO Hub
+ *
+ * Copyright © 2018, 2021 Oracle and/or its affiliates.
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#include "qemu/osdep.h"
+#include "qemu-common.h"
+
+#include "hw/pci/pci.h"
+#include "hw/pci/pci_ids.h"
+#include "hw/pci/pci_bus.h"
+#include "qemu/thread.h"
+#include "hw/boards.h"
+#include "hw/remote/machine.h"
+#include "hw/remote/iohub.h"
+#include "qemu/main-loop.h"
+
+void remote_iohub_init(RemoteIOHubState *iohub)
+{
+    int pirq;
+
+    memset(&iohub->irqfds, 0, sizeof(iohub->irqfds));
+    memset(&iohub->resamplefds, 0, sizeof(iohub->resamplefds));
+
+    for (pirq = 0; pirq < REMOTE_IOHUB_NB_PIRQS; pirq++) {
+        qemu_mutex_init(&iohub->irq_level_lock[pirq]);
+        iohub->irq_level[pirq] = 0;
+        event_notifier_init_fd(&iohub->irqfds[pirq], -1);
+        event_notifier_init_fd(&iohub->resamplefds[pirq], -1);
+    }
+}
+
+void remote_iohub_finalize(RemoteIOHubState *iohub)
+{
+    int pirq;
+
+    for (pirq = 0; pirq < REMOTE_IOHUB_NB_PIRQS; pirq++) {
+        qemu_set_fd_handler(event_notifier_get_fd(&iohub->resamplefds[pirq]),
+                            NULL, NULL, NULL);
+        event_notifier_cleanup(&iohub->irqfds[pirq]);
+        event_notifier_cleanup(&iohub->resamplefds[pirq]);
+        qemu_mutex_destroy(&iohub->irq_level_lock[pirq]);
+    }
+}
+
+int remote_iohub_map_irq(PCIDevice *pci_dev, int intx)
+{
+    return pci_dev->devfn;
+}
+
+void remote_iohub_set_irq(void *opaque, int pirq, int level)
+{
+    RemoteIOHubState *iohub = opaque;
+
+    assert(pirq >= 0);
+    assert(pirq < PCI_DEVFN_MAX);
+
+    QEMU_LOCK_GUARD(&iohub->irq_level_lock[pirq]);
+
+    if (level) {
+        if (++iohub->irq_level[pirq] == 1) {
+            event_notifier_set(&iohub->irqfds[pirq]);
+        }
+    } else if (iohub->irq_level[pirq] > 0) {
+        iohub->irq_level[pirq]--;
+    }
+}
+
+static void intr_resample_handler(void *opaque)
+{
+    ResampleToken *token = opaque;
+    RemoteIOHubState *iohub = token->iohub;
+    int pirq, s;
+
+    pirq = token->pirq;
+
+    s = event_notifier_test_and_clear(&iohub->resamplefds[pirq]);
+
+    assert(s >= 0);
+
+    QEMU_LOCK_GUARD(&iohub->irq_level_lock[pirq]);
+
+    if (iohub->irq_level[pirq]) {
+        event_notifier_set(&iohub->irqfds[pirq]);
+    }
+}
+
+void process_set_irqfd_msg(PCIDevice *pci_dev, MPQemuMsg *msg)
+{
+    RemoteMachineState *machine = REMOTE_MACHINE(current_machine);
+    RemoteIOHubState *iohub = &machine->iohub;
+    int pirq, intx;
+
+    intx = pci_get_byte(pci_dev->config + PCI_INTERRUPT_PIN) - 1;
+
+    pirq = remote_iohub_map_irq(pci_dev, intx);
+
+    if (event_notifier_get_fd(&iohub->irqfds[pirq]) != -1) {
+        qemu_set_fd_handler(event_notifier_get_fd(&iohub->resamplefds[pirq]),
+                            NULL, NULL, NULL);
+        event_notifier_cleanup(&iohub->irqfds[pirq]);
+        event_notifier_cleanup(&iohub->resamplefds[pirq]);
+        memset(&iohub->token[pirq], 0, sizeof(ResampleToken));
+    }
+
+    event_notifier_init_fd(&iohub->irqfds[pirq], msg->fds[0]);
+    event_notifier_init_fd(&iohub->resamplefds[pirq], msg->fds[1]);
+
+    iohub->token[pirq].iohub = iohub;
+    iohub->token[pirq].pirq = pirq;
+
+    qemu_set_fd_handler(msg->fds[1], intr_resample_handler, NULL,
+                        &iohub->token[pirq]);
+}
diff --git a/hw/remote/machine.c b/hw/remote/machine.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/remote/machine.c
+++ b/hw/remote/machine.c
@@ -XXX,XX +XXX,XX @@
 #include "exec/address-spaces.h"
 #include "exec/memory.h"
 #include "qapi/error.h"
+#include "hw/pci/pci_host.h"
+#include "hw/remote/iohub.h"
 
 static void remote_machine_init(MachineState *machine)
 {
     MemoryRegion *system_memory, *system_io, *pci_memory;
     RemoteMachineState *s = REMOTE_MACHINE(machine);
     RemotePCIHost *rem_host;
+    PCIHostState *pci_host;
 
     system_memory = get_system_memory();
     system_io = get_system_io();
@@ -XXX,XX +XXX,XX @@ static void remote_machine_init(MachineState *machine)
     memory_region_add_subregion_overlap(system_memory, 0x0, pci_memory, -1);
 
     qdev_realize(DEVICE(rem_host), sysbus_get_default(), &error_fatal);
+
+    pci_host = PCI_HOST_BRIDGE(rem_host);
+
+    remote_iohub_init(&s->iohub);
+
+    pci_bus_irqs(pci_host->bus, remote_iohub_set_irq, remote_iohub_map_irq,
+                 &s->iohub, REMOTE_IOHUB_NB_PIRQS);
 }
 
 static void remote_machine_class_init(ObjectClass *oc, void *data)
diff --git a/hw/remote/message.c b/hw/remote/message.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/remote/message.c
+++ b/hw/remote/message.c
@@ -XXX,XX +XXX,XX @@
 #include "hw/pci/pci.h"
 #include "exec/memattrs.h"
 #include "hw/remote/memory.h"
+#include "hw/remote/iohub.h"
 
 static void process_config_write(QIOChannel *ioc, PCIDevice *dev,
                                  MPQemuMsg *msg, Error **errp);
@@ -XXX,XX +XXX,XX @@ void coroutine_fn mpqemu_remote_msg_loop_co(void *data)
         case MPQEMU_CMD_SYNC_SYSMEM:
             remote_sysmem_reconfig(&msg, &local_err);
             break;
+        case MPQEMU_CMD_SET_IRQFD:
+            process_set_irqfd_msg(pci_dev, &msg);
+            break;
         default:
             error_setg(&local_err,
                        "Unknown command (%d) received for device %s"
diff --git a/hw/remote/mpqemu-link.c b/hw/remote/mpqemu-link.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/remote/mpqemu-link.c
+++ b/hw/remote/mpqemu-link.c
@@ -XXX,XX +XXX,XX @@ bool mpqemu_msg_valid(MPQemuMsg *msg)
             return false;
         }
         break;
+    case MPQEMU_CMD_SET_IRQFD:
+        if (msg->size || (msg->num_fds != 2)) {
+            return false;
+        }
+        break;
     default:
         break;
     }
diff --git a/hw/remote/proxy.c b/hw/remote/proxy.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/remote/proxy.c
+++ b/hw/remote/proxy.c
@@ -XXX,XX +XXX,XX @@
 #include "qemu/error-report.h"
 #include "hw/remote/proxy-memory-listener.h"
 #include "qom/object.h"
+#include "qemu/event_notifier.h"
+#include "sysemu/kvm.h"
+#include "util/event_notifier-posix.c"
+
+static void proxy_intx_update(PCIDevice *pci_dev)
+{
+    PCIProxyDev *dev = PCI_PROXY_DEV(pci_dev);
+    PCIINTxRoute route;
+    int pin = pci_get_byte(pci_dev->config + PCI_INTERRUPT_PIN) - 1;
+
+    if (dev->virq != -1) {
+        kvm_irqchip_remove_irqfd_notifier_gsi(kvm_state, &dev->intr, dev->virq);
+        dev->virq = -1;
+    }
+
+    route = pci_device_route_intx_to_irq(pci_dev, pin);
+
+    dev->virq = route.irq;
+
+    if (dev->virq != -1) {
+        kvm_irqchip_add_irqfd_notifier_gsi(kvm_state, &dev->intr,
+                                           &dev->resample, dev->virq);
+    }
+}
+
+static void setup_irqfd(PCIProxyDev *dev)
+{
+    PCIDevice *pci_dev = PCI_DEVICE(dev);
+    MPQemuMsg msg;
+    Error *local_err = NULL;
+
+    event_notifier_init(&dev->intr, 0);
+    event_notifier_init(&dev->resample, 0);
+
+    memset(&msg, 0, sizeof(MPQemuMsg));
+    msg.cmd = MPQEMU_CMD_SET_IRQFD;
+    msg.num_fds = 2;
+    msg.fds[0] = event_notifier_get_fd(&dev->intr);
+    msg.fds[1] = event_notifier_get_fd(&dev->resample);
+    msg.size = 0;
+
+    if (!mpqemu_msg_send(&msg, dev->ioc, &local_err)) {
+        error_report_err(local_err);
+    }
+
+    dev->virq = -1;
+
+    proxy_intx_update(pci_dev);
+
+    pci_device_set_intx_routing_notifier(pci_dev, proxy_intx_update);
+}
 
 static void pci_proxy_dev_realize(PCIDevice *device, Error **errp)
 {
@@ -XXX,XX +XXX,XX @@ static void pci_proxy_dev_realize(PCIDevice *device, Error **errp)
     qio_channel_set_blocking(dev->ioc, true, NULL);
 
     proxy_memory_listener_configure(&dev->proxy_listener, dev->ioc);
+
+    setup_irqfd(dev);
 }
 
 static void pci_proxy_dev_exit(PCIDevice *pdev)
@@ -XXX,XX +XXX,XX @@ static void pci_proxy_dev_exit(PCIDevice *pdev)
     error_free(dev->migration_blocker);
 
     proxy_memory_listener_deconfigure(&dev->proxy_listener);
+
+    event_notifier_cleanup(&dev->intr);
+    event_notifier_cleanup(&dev->resample);
 }
 
 static void config_op_send(PCIProxyDev *pdev, uint32_t addr, uint32_t *val,
diff --git a/hw/remote/meson.build b/hw/remote/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/hw/remote/meson.build
+++ b/hw/remote/meson.build
@@ -XXX,XX +XXX,XX @@ remote_ss.add(when: 'CONFIG_MULTIPROCESS', if_true: files('mpqemu-link.c'))
 remote_ss.add(when: 'CONFIG_MULTIPROCESS', if_true: files('message.c'))
 remote_ss.add(when: 'CONFIG_MULTIPROCESS', if_true: files('remote-obj.c'))
 remote_ss.add(when: 'CONFIG_MULTIPROCESS', if_true: files('proxy.c'))
+remote_ss.add(when: 'CONFIG_MULTIPROCESS', if_true: files('iohub.c'))
 
 specific_ss.add(when: 'CONFIG_MULTIPROCESS', if_true: files('memory.c'))
 specific_ss.add(when: 'CONFIG_MULTIPROCESS', if_true: files('proxy-memory-listener.c'))
-- 
2.29.2

From: Jagannathan Raman <jag.raman@oracle.com>

Retrieve PCI configuration info about the remote device and
configure the Proxy PCI object based on the returned information

Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 85ee367bbb993aa23699b44cfedd83b4ea6d5221.1611938319.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 hw/remote/proxy.c | 84 +++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 84 insertions(+)

diff --git a/hw/remote/proxy.c b/hw/remote/proxy.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/remote/proxy.c
+++ b/hw/remote/proxy.c
@@ -XXX,XX +XXX,XX @@
 #include "sysemu/kvm.h"
 #include "util/event_notifier-posix.c"
 
+static void probe_pci_info(PCIDevice *dev, Error **errp);
+
 static void proxy_intx_update(PCIDevice *pci_dev)
 {
     PCIProxyDev *dev = PCI_PROXY_DEV(pci_dev);
@@ -XXX,XX +XXX,XX @@ static void pci_proxy_dev_realize(PCIDevice *device, Error **errp)
 {
     ERRP_GUARD();
     PCIProxyDev *dev = PCI_PROXY_DEV(device);
+    uint8_t *pci_conf = device->config;
     int fd;
 
     if (!dev->fd) {
@@ -XXX,XX +XXX,XX @@ static void pci_proxy_dev_realize(PCIDevice *device, Error **errp)
     qemu_mutex_init(&dev->io_mutex);
     qio_channel_set_blocking(dev->ioc, true, NULL);
 
+    pci_conf[PCI_LATENCY_TIMER] = 0xff;
+    pci_conf[PCI_INTERRUPT_PIN] = 0x01;
+
     proxy_memory_listener_configure(&dev->proxy_listener, dev->ioc);
 
     setup_irqfd(dev);
+
+    probe_pci_info(PCI_DEVICE(dev), errp);
 }
 
 static void pci_proxy_dev_exit(PCIDevice *pdev)
@@ -XXX,XX +XXX,XX @@ const MemoryRegionOps proxy_mr_ops = {
         .max_access_size = 8,
     },
 };
+
+static void probe_pci_info(PCIDevice *dev, Error **errp)
+{
+    PCIDeviceClass *pc = PCI_DEVICE_GET_CLASS(dev);
+    uint32_t orig_val, new_val, base_class, val;
+    PCIProxyDev *pdev = PCI_PROXY_DEV(dev);
+    DeviceClass *dc = DEVICE_CLASS(pc);
+    uint8_t type;
+    int i, size;
+
+    config_op_send(pdev, PCI_VENDOR_ID, &val, 2, MPQEMU_CMD_PCI_CFGREAD);
+    pc->vendor_id = (uint16_t)val;
+
+    config_op_send(pdev, PCI_DEVICE_ID, &val, 2, MPQEMU_CMD_PCI_CFGREAD);
+    pc->device_id = (uint16_t)val;
+
+    config_op_send(pdev, PCI_CLASS_DEVICE, &val, 2, MPQEMU_CMD_PCI_CFGREAD);
+    pc->class_id = (uint16_t)val;
+
+    config_op_send(pdev, PCI_SUBSYSTEM_ID, &val, 2, MPQEMU_CMD_PCI_CFGREAD);
+    pc->subsystem_id = (uint16_t)val;
+
+    base_class = pc->class_id >> 4;
+    switch (base_class) {
+    case PCI_BASE_CLASS_BRIDGE:
+        set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
+        break;
+    case PCI_BASE_CLASS_STORAGE:
+        set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
+        break;
+    case PCI_BASE_CLASS_NETWORK:
+        set_bit(DEVICE_CATEGORY_NETWORK, dc->categories);
+        break;
+    case PCI_BASE_CLASS_INPUT:
+        set_bit(DEVICE_CATEGORY_INPUT, dc->categories);
+        break;
+    case PCI_BASE_CLASS_DISPLAY:
+        set_bit(DEVICE_CATEGORY_DISPLAY, dc->categories);
+        break;
+    case PCI_BASE_CLASS_PROCESSOR:
+        set_bit(DEVICE_CATEGORY_CPU, dc->categories);
+        break;
+    default:
+        set_bit(DEVICE_CATEGORY_MISC, dc->categories);
+        break;
+    }
+
+    for (i = 0; i < PCI_NUM_REGIONS; i++) {
+        config_op_send(pdev, PCI_BASE_ADDRESS_0 + (4 * i), &orig_val, 4,
+                       MPQEMU_CMD_PCI_CFGREAD);
+        new_val = 0xffffffff;
+        config_op_send(pdev, PCI_BASE_ADDRESS_0 + (4 * i), &new_val, 4,
+                       MPQEMU_CMD_PCI_CFGWRITE);
+        config_op_send(pdev, PCI_BASE_ADDRESS_0 + (4 * i), &new_val, 4,
+                       MPQEMU_CMD_PCI_CFGREAD);
+        size = (~(new_val & 0xFFFFFFF0)) + 1;
+        config_op_send(pdev, PCI_BASE_ADDRESS_0 + (4 * i), &orig_val, 4,
+                       MPQEMU_CMD_PCI_CFGWRITE);
+        type = (new_val & 0x1) ?
+                   PCI_BASE_ADDRESS_SPACE_IO : PCI_BASE_ADDRESS_SPACE_MEMORY;
+
+        if (size) {
+            g_autofree char *name;
+            pdev->region[i].dev = pdev;
+            pdev->region[i].present = true;
+            if (type == PCI_BASE_ADDRESS_SPACE_MEMORY) {
+                pdev->region[i].memory = true;
+            }
+            name = g_strdup_printf("bar-region-%d", i);
+            memory_region_init_io(&pdev->region[i].mr, OBJECT(pdev),
+                                  &proxy_mr_ops, &pdev->region[i],
+                                  name, size);
+            pci_register_bar(dev, i, type, &pdev->region[i].mr);
+        }
+    }
+}
-- 
2.29.2

From: Elena Ufimtseva <elena.ufimtseva@oracle.com>

Perform device reset in the remote process when QEMU performs
device reset. This is required to reset the internal state
(like registers, etc...) of emulated devices

Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 7cb220a51f565dc0817bd76e2f540e89c2d2b850.1611938319.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 include/hw/remote/mpqemu-link.h |  1 +
 hw/remote/message.c             | 22 ++++++++++++++++++++++
 hw/remote/proxy.c               | 19 +++++++++++++++++++
 3 files changed, 42 insertions(+)

From: "Denis V. Lunev" <den@openvz.org>

Original specification says that l1 table size if 64 * l1_size, which
is obviously wrong. The size of the l1 entry is 64 _bits_, not bytes.
Thus 64 is to be replaces with 8 as specification says about bytes.

There is also minor tweak, field name is renamed from l1 to l1_table,
which matches with the later text.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20210128171313.2210947-1-den@openvz.org
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>

[Replace the original commit message "docs: fix mistake in dirty bitmap
feature description" as suggested by Eric Blake.
--Stefan]

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 docs/interop/parallels.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/docs/interop/parallels.txt b/docs/interop/parallels.txt
index XXXXXXX..XXXXXXX 100644
--- a/docs/interop/parallels.txt
+++ b/docs/interop/parallels.txt
@@ -XXX,XX +XXX,XX @@ of its data area are:
   28 - 31:    l1_size
               The number of entries in the L1 table of the bitmap.
 
-  variable:   l1 (64 * l1_size bytes)
+  variable:   l1_table (8 * l1_size bytes)
               L1 offset table (in bytes)
 
 A dirty bitmap is stored using a one-level structure for the mapping to host
-- 
2.29.2