The following changes since commit a35947f15c0ee695eba3c55248ec8ac3e4e23cca: Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-updates-070621-2' into staging (2021-06-07 15:45:48 +0100) are available in the Git repository at: git@github.com:alistair23/qemu.git tags/pull-riscv-to-apply-20210608-1 for you to fetch changes up to d2c1a177b138be35cb96216baa870c3564b123e4: target/riscv: rvb: add b-ext version cpu option (2021-06-08 09:59:46 +1000) ---------------------------------------------------------------- Second RISC-V PR for QEMU 6.1 - Update the PLIC and CLINT DT bindings - Improve documentation for RISC-V machines - Support direct kernel boot for microchip_pfsoc - Fix WFI exception behaviour - Improve CSR printing - Initial support for the experimental Bit Manip extension ---------------------------------------------------------------- Alistair Francis (2): docs/system: Move the RISC-V -bios information to removed target/riscv/pmp: Add assert for ePMP operations Bin Meng (9): hw/riscv: sifive_u: Switch to use qemu_fdt_setprop_string_array() helper hw/riscv: virt: Switch to use qemu_fdt_setprop_string_array() helper hw/riscv: Support the official CLINT DT bindings hw/riscv: Support the official PLIC DT bindings docs/system/riscv: Correct the indentation level of supported devices docs/system/riscv: sifive_u: Document '-dtb' usage hw/riscv: Use macros for BIOS image names hw/riscv: microchip_pfsoc: Support direct kernel boot target/riscv: Remove unnecessary riscv_*_names[] declaration Changbin Du (1): target/riscv: Dump CSR mscratch/sscratch/satp Frank Chang (6): target/riscv: rvb: count bits set target/riscv: add gen_shifti() and gen_shiftiw() helper functions target/riscv: rvb: single-bit instructions target/riscv: rvb: generalized reverse target/riscv: rvb: generalized or-combine target/riscv: rvb: add b-ext version cpu option Jose Martins (1): target/riscv: fix wfi exception behavior Kito Cheng (11): target/riscv: reformat @sh format encoding for B-extension target/riscv: rvb: count leading/trailing zeros target/riscv: rvb: logic-with-negate target/riscv: rvb: pack two words into one register target/riscv: rvb: min/max instructions target/riscv: rvb: sign-extend instructions target/riscv: rvb: shift ones target/riscv: rvb: rotate (left/right) target/riscv: rvb: address calculation target/riscv: rvb: add/shift with prefix zero-extend target/riscv: rvb: support and turn on B-extension from command line LIU Zhiwei (1): target/riscv: Pass the same value to oprsz and maxsz. Philippe Mathieu-Daudé (1): target/riscv: Do not include 'pmp.h' in user emulation docs/system/deprecated.rst | 19 -- docs/system/removed-features.rst | 5 + docs/system/riscv/microchip-icicle-kit.rst | 50 +++- docs/system/riscv/sifive_u.rst | 77 +++-- docs/system/target-riscv.rst | 13 +- include/hw/riscv/boot.h | 5 + target/riscv/cpu.h | 9 +- target/riscv/cpu_bits.h | 1 + target/riscv/helper.h | 6 + target/riscv/insn32.decode | 87 +++++- hw/riscv/microchip_pfsoc.c | 81 +++++- hw/riscv/sifive_u.c | 24 +- hw/riscv/spike.c | 12 +- hw/riscv/virt.c | 25 +- target/riscv/bitmanip_helper.c | 90 ++++++ target/riscv/cpu.c | 38 ++- target/riscv/op_helper.c | 11 +- target/riscv/pmp.c | 4 + target/riscv/translate.c | 306 ++++++++++++++++++++ target/riscv/insn_trans/trans_rvb.c.inc | 438 +++++++++++++++++++++++++++++ target/riscv/insn_trans/trans_rvi.c.inc | 54 +--- target/riscv/insn_trans/trans_rvv.c.inc | 89 +++--- target/riscv/meson.build | 1 + 23 files changed, 1260 insertions(+), 185 deletions(-) create mode 100644 target/riscv/bitmanip_helper.c create mode 100644 target/riscv/insn_trans/trans_rvb.c.inc From: Bin Meng <bin.meng@windriver.com> Since commit 78da6a1bca22 ("device_tree: add qemu_fdt_setprop_string_array helper"), we can use the new helper to set the clock name for the ethernet controller node. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210430071302.1489082-1-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/sifive_u.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/sifive_u.c +++ b/hw/riscv/sifive_u.c @@ -XXX,XX +XXX,XX @@ static void create_fdt(SiFiveUState *s, const MemMapEntry *memmap, int cpu; uint32_t *cells; char *nodename; - char ethclk_names[] = "pclk\0hclk"; uint32_t plic_phandle, prci_phandle, gpio_phandle, phandle = 1; uint32_t hfclk_phandle, rtcclk_phandle, phy_phandle; + static const char * const ethclk_names[2] = { "pclk", "hclk" }; if (ms->dtb) { fdt = s->fdt = load_device_tree(ms->dtb, &s->fdt_size); @@ -XXX,XX +XXX,XX @@ static void create_fdt(SiFiveUState *s, const MemMapEntry *memmap, qemu_fdt_setprop_cell(fdt, nodename, "interrupts", SIFIVE_U_GEM_IRQ); qemu_fdt_setprop_cells(fdt, nodename, "clocks", prci_phandle, PRCI_CLK_GEMGXLPLL, prci_phandle, PRCI_CLK_GEMGXLPLL); - qemu_fdt_setprop(fdt, nodename, "clock-names", ethclk_names, - sizeof(ethclk_names)); + qemu_fdt_setprop_string_array(fdt, nodename, "clock-names", + (char **)&ethclk_names, ARRAY_SIZE(ethclk_names)); qemu_fdt_setprop(fdt, nodename, "local-mac-address", s->soc.gem.conf.macaddr.a, ETH_ALEN); qemu_fdt_setprop_cell(fdt, nodename, "#address-cells", 1); -- 2.31.1 From: Bin Meng <bin.meng@windriver.com> Since commit 78da6a1bca22 ("device_tree: add qemu_fdt_setprop_string_array helper"), we can use the new helper to set the compatible strings for the SiFive test device node. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210430071302.1489082-2-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt(RISCVVirtState *s, const MemMapEntry *memmap, (long)memmap[VIRT_TEST].base); qemu_fdt_add_subnode(fdt, name); { - const char compat[] = "sifive,test1\0sifive,test0\0syscon"; - qemu_fdt_setprop(fdt, name, "compatible", compat, sizeof(compat)); + static const char * const compat[3] = { + "sifive,test1", "sifive,test0", "syscon" + }; + qemu_fdt_setprop_string_array(fdt, name, "compatible", (char **)&compat, + ARRAY_SIZE(compat)); } qemu_fdt_setprop_cells(fdt, name, "reg", 0x0, memmap[VIRT_TEST].base, -- 2.31.1 From: Bin Meng <bin.meng@windriver.com> Linux kernel commit a2770b57d083 ("dt-bindings: timer: Add CLINT bindings") adds the official DT bindings for CLINT, which uses "sifive,clint0" as the compatible string. "riscv,clint0" is now legacy and has to be kept for backward compatibility of legacy systems. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210430071302.1489082-3-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/sifive_u.c | 6 +++++- hw/riscv/spike.c | 6 +++++- hw/riscv/virt.c | 6 +++++- 3 files changed, 15 insertions(+), 3 deletions(-) diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/sifive_u.c +++ b/hw/riscv/sifive_u.c @@ -XXX,XX +XXX,XX @@ static void create_fdt(SiFiveUState *s, const MemMapEntry *memmap, uint32_t plic_phandle, prci_phandle, gpio_phandle, phandle = 1; uint32_t hfclk_phandle, rtcclk_phandle, phy_phandle; static const char * const ethclk_names[2] = { "pclk", "hclk" }; + static const char * const clint_compat[2] = { + "sifive,clint0", "riscv,clint0" + }; if (ms->dtb) { fdt = s->fdt = load_device_tree(ms->dtb, &s->fdt_size); @@ -XXX,XX +XXX,XX @@ static void create_fdt(SiFiveUState *s, const MemMapEntry *memmap, nodename = g_strdup_printf("/soc/clint@%lx", (long)memmap[SIFIVE_U_DEV_CLINT].base); qemu_fdt_add_subnode(fdt, nodename); - qemu_fdt_setprop_string(fdt, nodename, "compatible", "riscv,clint0"); + qemu_fdt_setprop_string_array(fdt, nodename, "compatible", + (char **)&clint_compat, ARRAY_SIZE(clint_compat)); qemu_fdt_setprop_cells(fdt, nodename, "reg", 0x0, memmap[SIFIVE_U_DEV_CLINT].base, 0x0, memmap[SIFIVE_U_DEV_CLINT].size); diff --git a/hw/riscv/spike.c b/hw/riscv/spike.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/spike.c +++ b/hw/riscv/spike.c @@ -XXX,XX +XXX,XX @@ static void create_fdt(SpikeState *s, const MemMapEntry *memmap, uint32_t cpu_phandle, intc_phandle, phandle = 1; char *name, *mem_name, *clint_name, *clust_name; char *core_name, *cpu_name, *intc_name; + static const char * const clint_compat[2] = { + "sifive,clint0", "riscv,clint0" + }; fdt = s->fdt = create_device_tree(&s->fdt_size); if (!fdt) { @@ -XXX,XX +XXX,XX @@ static void create_fdt(SpikeState *s, const MemMapEntry *memmap, (memmap[SPIKE_CLINT].size * socket); clint_name = g_strdup_printf("/soc/clint@%lx", clint_addr); qemu_fdt_add_subnode(fdt, clint_name); - qemu_fdt_setprop_string(fdt, clint_name, "compatible", "riscv,clint0"); + qemu_fdt_setprop_string_array(fdt, clint_name, "compatible", + (char **)&clint_compat, ARRAY_SIZE(clint_compat)); qemu_fdt_setprop_cells(fdt, clint_name, "reg", 0x0, clint_addr, 0x0, memmap[SPIKE_CLINT].size); qemu_fdt_setprop(fdt, clint_name, "interrupts-extended", diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt(RISCVVirtState *s, const MemMapEntry *memmap, char *name, *clint_name, *plic_name, *clust_name; hwaddr flashsize = virt_memmap[VIRT_FLASH].size / 2; hwaddr flashbase = virt_memmap[VIRT_FLASH].base; + static const char * const clint_compat[2] = { + "sifive,clint0", "riscv,clint0" + }; if (mc->dtb) { fdt = mc->fdt = load_device_tree(mc->dtb, &s->fdt_size); @@ -XXX,XX +XXX,XX @@ static void create_fdt(RISCVVirtState *s, const MemMapEntry *memmap, (memmap[VIRT_CLINT].size * socket); clint_name = g_strdup_printf("/soc/clint@%lx", clint_addr); qemu_fdt_add_subnode(fdt, clint_name); - qemu_fdt_setprop_string(fdt, clint_name, "compatible", "riscv,clint0"); + qemu_fdt_setprop_string_array(fdt, clint_name, "compatible", + (char **)&clint_compat, ARRAY_SIZE(clint_compat)); qemu_fdt_setprop_cells(fdt, clint_name, "reg", 0x0, clint_addr, 0x0, memmap[VIRT_CLINT].size); qemu_fdt_setprop(fdt, clint_name, "interrupts-extended", -- 2.31.1 From: Bin Meng <bin.meng@windriver.com> The official DT bindings of PLIC uses "sifive,plic-1.0.0" as the compatible string in the upstream Linux kernel. "riscv,plic0" is now legacy and has to be kept for backward compatibility of legacy systems. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210430071302.1489082-4-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/sifive_u.c | 6 +++++- hw/riscv/virt.c | 6 +++++- 2 files changed, 10 insertions(+), 2 deletions(-) diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/sifive_u.c +++ b/hw/riscv/sifive_u.c @@ -XXX,XX +XXX,XX @@ static void create_fdt(SiFiveUState *s, const MemMapEntry *memmap, static const char * const clint_compat[2] = { "sifive,clint0", "riscv,clint0" }; + static const char * const plic_compat[2] = { + "sifive,plic-1.0.0", "riscv,plic0" + }; if (ms->dtb) { fdt = s->fdt = load_device_tree(ms->dtb, &s->fdt_size); @@ -XXX,XX +XXX,XX @@ static void create_fdt(SiFiveUState *s, const MemMapEntry *memmap, (long)memmap[SIFIVE_U_DEV_PLIC].base); qemu_fdt_add_subnode(fdt, nodename); qemu_fdt_setprop_cell(fdt, nodename, "#interrupt-cells", 1); - qemu_fdt_setprop_string(fdt, nodename, "compatible", "riscv,plic0"); + qemu_fdt_setprop_string_array(fdt, nodename, "compatible", + (char **)&plic_compat, ARRAY_SIZE(plic_compat)); qemu_fdt_setprop(fdt, nodename, "interrupt-controller", NULL, 0); qemu_fdt_setprop(fdt, nodename, "interrupts-extended", cells, (ms->smp.cpus * 4 - 2) * sizeof(uint32_t)); diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt(RISCVVirtState *s, const MemMapEntry *memmap, static const char * const clint_compat[2] = { "sifive,clint0", "riscv,clint0" }; + static const char * const plic_compat[2] = { + "sifive,plic-1.0.0", "riscv,plic0" + }; if (mc->dtb) { fdt = mc->fdt = load_device_tree(mc->dtb, &s->fdt_size); @@ -XXX,XX +XXX,XX @@ static void create_fdt(RISCVVirtState *s, const MemMapEntry *memmap, "#address-cells", FDT_PLIC_ADDR_CELLS); qemu_fdt_setprop_cell(fdt, plic_name, "#interrupt-cells", FDT_PLIC_INT_CELLS); - qemu_fdt_setprop_string(fdt, plic_name, "compatible", "riscv,plic0"); + qemu_fdt_setprop_string_array(fdt, plic_name, "compatible", + (char **)&plic_compat, ARRAY_SIZE(plic_compat)); qemu_fdt_setprop(fdt, plic_name, "interrupt-controller", NULL, 0); qemu_fdt_setprop(fdt, plic_name, "interrupts-extended", plic_cells, s->soc[socket].num_harts * sizeof(uint32_t) * 4); -- 2.31.1 From: Bin Meng <bin.meng@windriver.com> The supported device bullet list has an additional space before each entry, which makes a wrong indentation level. Correct it. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210430071302.1489082-5-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- docs/system/riscv/microchip-icicle-kit.rst | 20 +++++++-------- docs/system/riscv/sifive_u.rst | 30 +++++++++++----------- 2 files changed, 25 insertions(+), 25 deletions(-) diff --git a/docs/system/riscv/microchip-icicle-kit.rst b/docs/system/riscv/microchip-icicle-kit.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/riscv/microchip-icicle-kit.rst +++ b/docs/system/riscv/microchip-icicle-kit.rst @@ -XXX,XX +XXX,XX @@ Supported devices The ``microchip-icicle-kit`` machine supports the following devices: - * 1 E51 core - * 4 U54 cores - * Core Level Interruptor (CLINT) - * Platform-Level Interrupt Controller (PLIC) - * L2 Loosely Integrated Memory (L2-LIM) - * DDR memory controller - * 5 MMUARTs - * 1 DMA controller - * 2 GEM Ethernet controllers - * 1 SDHC storage controller +* 1 E51 core +* 4 U54 cores +* Core Level Interruptor (CLINT) +* Platform-Level Interrupt Controller (PLIC) +* L2 Loosely Integrated Memory (L2-LIM) +* DDR memory controller +* 5 MMUARTs +* 1 DMA controller +* 2 GEM Ethernet controllers +* 1 SDHC storage controller Boot options ------------ diff --git a/docs/system/riscv/sifive_u.rst b/docs/system/riscv/sifive_u.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/riscv/sifive_u.rst +++ b/docs/system/riscv/sifive_u.rst @@ -XXX,XX +XXX,XX @@ Supported devices The ``sifive_u`` machine supports the following devices: - * 1 E51 / E31 core - * Up to 4 U54 / U34 cores - * Core Level Interruptor (CLINT) - * Platform-Level Interrupt Controller (PLIC) - * Power, Reset, Clock, Interrupt (PRCI) - * L2 Loosely Integrated Memory (L2-LIM) - * DDR memory controller - * 2 UARTs - * 1 GEM Ethernet controller - * 1 GPIO controller - * 1 One-Time Programmable (OTP) memory with stored serial number - * 1 DMA controller - * 2 QSPI controllers - * 1 ISSI 25WP256 flash - * 1 SD card in SPI mode +* 1 E51 / E31 core +* Up to 4 U54 / U34 cores +* Core Level Interruptor (CLINT) +* Platform-Level Interrupt Controller (PLIC) +* Power, Reset, Clock, Interrupt (PRCI) +* L2 Loosely Integrated Memory (L2-LIM) +* DDR memory controller +* 2 UARTs +* 1 GEM Ethernet controller +* 1 GPIO controller +* 1 One-Time Programmable (OTP) memory with stored serial number +* 1 DMA controller +* 2 QSPI controllers +* 1 ISSI 25WP256 flash +* 1 SD card in SPI mode Please note the real world HiFive Unleashed board has a fixed configuration of 1 E51 core and 4 U54 core combination and the RISC-V core boots in 64-bit mode. -- 2.31.1 From: Bin Meng <bin.meng@windriver.com> Update the 'sifive_u' machine documentation to mention the '-dtb' option that can be used to pass a custom DTB to QEMU. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210430071302.1489082-6-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- docs/system/riscv/sifive_u.rst | 47 +++++++++++++++++++++++++++++----- 1 file changed, 41 insertions(+), 6 deletions(-) diff --git a/docs/system/riscv/sifive_u.rst b/docs/system/riscv/sifive_u.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/riscv/sifive_u.rst +++ b/docs/system/riscv/sifive_u.rst @@ -XXX,XX +XXX,XX @@ Hardware configuration information ---------------------------------- The ``sifive_u`` machine automatically generates a device tree blob ("dtb") -which it passes to the guest. This provides information about the addresses, -interrupt lines and other configuration of the various devices in the system. -Guest software should discover the devices that are present in the generated -DTB instead of using a DTB for the real hardware, as some of the devices are -not modeled by QEMU and trying to access these devices may cause unexpected -behavior. +which it passes to the guest, if there is no ``-dtb`` option. This provides +information about the addresses, interrupt lines and other configuration of +the various devices in the system. Guest software should discover the devices +that are present in the generated DTB instead of using a DTB for the real +hardware, as some of the devices are not modeled by QEMU and trying to access +these devices may cause unexpected behavior. + +If users want to provide their own DTB, they can use the ``-dtb`` option. +These DTBs should have the following requirements: + +* The /cpus node should contain at least one subnode for E51 and the number + of subnodes should match QEMU's ``-smp`` option +* The /memory reg size should match QEMU’s selected ram_size via ``-m`` +* Should contain a node for the CLINT device with a compatible string + "riscv,clint0" if using with OpenSBI BIOS images Boot options ------------ @@ -XXX,XX +XXX,XX @@ To boot the newly built Linux kernel in QEMU with the ``sifive_u`` machine: -initrd /path/to/rootfs.ext4 \ -append "root=/dev/ram" +Alternatively, we can use a custom DTB to boot the machine by inserting a CLINT +node in fu540-c000.dtsi in the Linux kernel, + +.. code-block:: none + + clint: clint@2000000 { + compatible = "riscv,clint0"; + interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7 + &cpu1_intc 3 &cpu1_intc 7 + &cpu2_intc 3 &cpu2_intc 7 + &cpu3_intc 3 &cpu3_intc 7 + &cpu4_intc 3 &cpu4_intc 7>; + reg = <0x00 0x2000000 0x00 0x10000>; + }; + +with the following command line options: + +.. code-block:: bash + + $ qemu-system-riscv64 -M sifive_u -smp 5 -m 8G \ + -display none -serial stdio \ + -kernel arch/riscv/boot/Image \ + -dtb arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dtb \ + -initrd /path/to/rootfs.ext4 \ + -append "root=/dev/ram" + To build a Linux mainline kernel that can be booted by the ``sifive_u`` machine in 32-bit mode, use the rv32_defconfig configuration. A patch is required to fix the 32-bit boot issue for Linux kernel v5.10. -- 2.31.1 From: Bin Meng <bin.meng@windriver.com> The OpenSBI BIOS image names are used by many RISC-V machines. Let's define macros for them. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210430071302.1489082-7-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/riscv/boot.h | 5 +++++ hw/riscv/sifive_u.c | 6 ++---- hw/riscv/spike.c | 6 ++---- hw/riscv/virt.c | 6 ++---- 4 files changed, 11 insertions(+), 12 deletions(-) diff --git a/include/hw/riscv/boot.h b/include/hw/riscv/boot.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/riscv/boot.h +++ b/include/hw/riscv/boot.h @@ -XXX,XX +XXX,XX @@ #include "hw/loader.h" #include "hw/riscv/riscv_hart.h" +#define RISCV32_BIOS_BIN "opensbi-riscv32-generic-fw_dynamic.bin" +#define RISCV32_BIOS_ELF "opensbi-riscv32-generic-fw_dynamic.elf" +#define RISCV64_BIOS_BIN "opensbi-riscv64-generic-fw_dynamic.bin" +#define RISCV64_BIOS_ELF "opensbi-riscv64-generic-fw_dynamic.elf" + bool riscv_is_32bit(RISCVHartArrayState *harts); target_ulong riscv_calc_kernel_start_addr(RISCVHartArrayState *harts, diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/sifive_u.c +++ b/hw/riscv/sifive_u.c @@ -XXX,XX +XXX,XX @@ static void sifive_u_machine_init(MachineState *machine) if (riscv_is_32bit(&s->soc.u_cpus)) { firmware_end_addr = riscv_find_and_load_firmware(machine, - "opensbi-riscv32-generic-fw_dynamic.bin", - start_addr, NULL); + RISCV32_BIOS_BIN, start_addr, NULL); } else { firmware_end_addr = riscv_find_and_load_firmware(machine, - "opensbi-riscv64-generic-fw_dynamic.bin", - start_addr, NULL); + RISCV64_BIOS_BIN, start_addr, NULL); } if (machine->kernel_filename) { diff --git a/hw/riscv/spike.c b/hw/riscv/spike.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/spike.c +++ b/hw/riscv/spike.c @@ -XXX,XX +XXX,XX @@ static void spike_board_init(MachineState *machine) */ if (riscv_is_32bit(&s->soc[0])) { firmware_end_addr = riscv_find_and_load_firmware(machine, - "opensbi-riscv32-generic-fw_dynamic.elf", - memmap[SPIKE_DRAM].base, + RISCV32_BIOS_ELF, memmap[SPIKE_DRAM].base, htif_symbol_callback); } else { firmware_end_addr = riscv_find_and_load_firmware(machine, - "opensbi-riscv64-generic-fw_dynamic.elf", - memmap[SPIKE_DRAM].base, + RISCV64_BIOS_ELF, memmap[SPIKE_DRAM].base, htif_symbol_callback); } diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_machine_init(MachineState *machine) if (riscv_is_32bit(&s->soc[0])) { firmware_end_addr = riscv_find_and_load_firmware(machine, - "opensbi-riscv32-generic-fw_dynamic.bin", - start_addr, NULL); + RISCV32_BIOS_BIN, start_addr, NULL); } else { firmware_end_addr = riscv_find_and_load_firmware(machine, - "opensbi-riscv64-generic-fw_dynamic.bin", - start_addr, NULL); + RISCV64_BIOS_BIN, start_addr, NULL); } if (machine->kernel_filename) { -- 2.31.1 From: Bin Meng <bin.meng@windriver.com> At present the Microchip Icicle Kit machine only supports using '-bios' to load the HSS, and does not support '-kernel' for direct kernel booting just like other RISC-V machines do. One has to use U-Boot which is chain-loaded by HSS, to load a kernel for testing. This is not so convenient. Adding '-kernel' support together with the existing '-bios', we follow the following table to select which payload we execute: -bios | -kernel | payload ------+------------+-------- N | N | HSS Y | don't care | HSS N | Y | kernel This ensures backwards compatibility with how we used to expose '-bios' to users. When '-kernel' is used for direct boot, '-dtb' must be present to provide a valid device tree for the board, as we don't generate device tree. When direct kernel boot is used, the OpenSBI fw_dynamic BIOS image is used to boot a payload like U-Boot or OS kernel directly. Documentation is updated to describe the direct kernel boot. Note as of today there is still no PolarFire SoC support in the upstream Linux kernel hence the document does not include instructions for that. It will be updated in the future. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210430071302.1489082-8-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- docs/system/riscv/microchip-icicle-kit.rst | 30 ++++++-- hw/riscv/microchip_pfsoc.c | 81 +++++++++++++++++++++- 2 files changed, 103 insertions(+), 8 deletions(-) diff --git a/docs/system/riscv/microchip-icicle-kit.rst b/docs/system/riscv/microchip-icicle-kit.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/riscv/microchip-icicle-kit.rst +++ b/docs/system/riscv/microchip-icicle-kit.rst @@ -XXX,XX +XXX,XX @@ Boot options The ``microchip-icicle-kit`` machine can start using the standard -bios functionality for loading its BIOS image, aka Hart Software Services (HSS_). -HSS loads the second stage bootloader U-Boot from an SD card. It does not -support direct kernel loading via the -kernel option. One has to load kernel -from U-Boot. +HSS loads the second stage bootloader U-Boot from an SD card. Then a kernel +can be loaded from U-Boot. It also supports direct kernel booting via the +-kernel option along with the device tree blob via -dtb. When direct kernel +boot is used, the OpenSBI fw_dynamic BIOS image is used to boot a payload +like U-Boot or OS kernel directly. + +The user provided DTB should have the following requirements: + +* The /cpus node should contain at least one subnode for E51 and the number + of subnodes should match QEMU's ``-smp`` option +* The /memory reg size should match QEMU’s selected ram_size via ``-m`` +* Should contain a node for the CLINT device with a compatible string + "riscv,clint0" + +QEMU follows below truth table to select which payload to execute: + +===== ========== ======= +-bios -kernel payload +===== ========== ======= + N N HSS + Y don't care HSS + N Y kernel +===== ========== ======= The memory is set to 1537 MiB by default which is the minimum required high memory size by HSS. A sanity check on ram size is performed in the machine init routine to prompt user to increase the RAM size to > 1537 MiB when less than 1537 MiB ram is detected. -Boot the machine ----------------- +Running HSS +----------- HSS 2020.12 release is tested at the time of writing. To build an HSS image that can be booted by the ``microchip-icicle-kit`` machine, type the following diff --git a/hw/riscv/microchip_pfsoc.c b/hw/riscv/microchip_pfsoc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/microchip_pfsoc.c +++ b/hw/riscv/microchip_pfsoc.c @@ -XXX,XX +XXX,XX @@ #include "hw/riscv/microchip_pfsoc.h" #include "hw/intc/sifive_clint.h" #include "hw/intc/sifive_plic.h" +#include "sysemu/device_tree.h" #include "sysemu/sysemu.h" /* @@ -XXX,XX +XXX,XX @@ static void microchip_icicle_kit_machine_init(MachineState *machine) MemoryRegion *mem_high = g_new(MemoryRegion, 1); MemoryRegion *mem_high_alias = g_new(MemoryRegion, 1); uint64_t mem_high_size; + hwaddr firmware_load_addr; + const char *firmware_name; + bool kernel_as_payload = false; + target_ulong firmware_end_addr, kernel_start_addr; + uint64_t kernel_entry; + uint32_t fdt_load_addr; DriveInfo *dinfo = drive_get_next(IF_SD); /* Sanity check on RAM size */ @@ -XXX,XX +XXX,XX @@ static void microchip_icicle_kit_machine_init(MachineState *machine) memmap[MICROCHIP_PFSOC_DRAM_HI_ALIAS].base, mem_high_alias); - /* Load the firmware */ - riscv_find_and_load_firmware(machine, BIOS_FILENAME, RESET_VECTOR, NULL); - /* Attach an SD card */ if (dinfo) { CadenceSDHCIState *sdhci = &(s->soc.sdhci); @@ -XXX,XX +XXX,XX @@ static void microchip_icicle_kit_machine_init(MachineState *machine) &error_fatal); qdev_realize_and_unref(card, sdhci->bus, &error_fatal); } + + /* + * We follow the following table to select which payload we execute. + * + * -bios | -kernel | payload + * -------+------------+-------- + * N | N | HSS + * Y | don't care | HSS + * N | Y | kernel + * + * This ensures backwards compatibility with how we used to expose -bios + * to users but allows them to run through direct kernel booting as well. + * + * When -kernel is used for direct boot, -dtb must be present to provide + * a valid device tree for the board, as we don't generate device tree. + */ + + if (machine->kernel_filename && machine->dtb) { + int fdt_size; + machine->fdt = load_device_tree(machine->dtb, &fdt_size); + if (!machine->fdt) { + error_report("load_device_tree() failed"); + exit(1); + } + + firmware_name = RISCV64_BIOS_BIN; + firmware_load_addr = memmap[MICROCHIP_PFSOC_DRAM_LO].base; + kernel_as_payload = true; + } + + if (!kernel_as_payload) { + firmware_name = BIOS_FILENAME; + firmware_load_addr = RESET_VECTOR; + } + + /* Load the firmware */ + firmware_end_addr = riscv_find_and_load_firmware(machine, firmware_name, + firmware_load_addr, NULL); + + if (kernel_as_payload) { + kernel_start_addr = riscv_calc_kernel_start_addr(&s->soc.u_cpus, + firmware_end_addr); + + kernel_entry = riscv_load_kernel(machine->kernel_filename, + kernel_start_addr, NULL); + + if (machine->initrd_filename) { + hwaddr start; + hwaddr end = riscv_load_initrd(machine->initrd_filename, + machine->ram_size, kernel_entry, + &start); + qemu_fdt_setprop_cell(machine->fdt, "/chosen", + "linux,initrd-start", start); + qemu_fdt_setprop_cell(machine->fdt, "/chosen", + "linux,initrd-end", end); + } + + if (machine->kernel_cmdline) { + qemu_fdt_setprop_string(machine->fdt, "/chosen", + "bootargs", machine->kernel_cmdline); + } + + /* Compute the fdt load address in dram */ + fdt_load_addr = riscv_load_fdt(memmap[MICROCHIP_PFSOC_DRAM_LO].base, + machine->ram_size, machine->fdt); + /* Load the reset vector */ + riscv_setup_rom_reset_vec(machine, &s->soc.u_cpus, firmware_load_addr, + memmap[MICROCHIP_PFSOC_ENVM_DATA].base, + memmap[MICROCHIP_PFSOC_ENVM_DATA].size, + kernel_entry, fdt_load_addr, machine->fdt); + } } static void microchip_icicle_kit_machine_class_init(ObjectClass *oc, void *data) -- 2.31.1 From: Jose Martins <josemartins90@gmail.com> The wfi exception trigger behavior should take into account user mode, hstatus.vtw, and the fact the an wfi might raise different types of exceptions depending on various factors: If supervisor mode is not present: - an illegal instruction exception should be generated if user mode executes and wfi instruction and mstatus.tw = 1. If supervisor mode is present: - when a wfi instruction is executed, an illegal exception should be triggered if either the current mode is user or the mode is supervisor and mstatus.tw is set. Plus, if the hypervisor extensions are enabled: - a virtual instruction exception should be raised when a wfi is executed from virtual-user or virtual-supervisor and hstatus.vtw is set. Signed-off-by: Jose Martins <josemartins90@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210420213656.85148-1-josemartins90@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu_bits.h | 1 + target/riscv/op_helper.c | 11 ++++++++--- 2 files changed, 9 insertions(+), 3 deletions(-) diff --git a/target/riscv/cpu_bits.h b/target/riscv/cpu_bits.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_bits.h +++ b/target/riscv/cpu_bits.h @@ -XXX,XX +XXX,XX @@ #define HSTATUS_HU 0x00000200 #define HSTATUS_VGEIN 0x0003F000 #define HSTATUS_VTVM 0x00100000 +#define HSTATUS_VTW 0x00200000 #define HSTATUS_VTSR 0x00400000 #define HSTATUS_VSXL 0x300000000 diff --git a/target/riscv/op_helper.c b/target/riscv/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/op_helper.c +++ b/target/riscv/op_helper.c @@ -XXX,XX +XXX,XX @@ target_ulong helper_mret(CPURISCVState *env, target_ulong cpu_pc_deb) void helper_wfi(CPURISCVState *env) { CPUState *cs = env_cpu(env); + bool rvs = riscv_has_ext(env, RVS); + bool prv_u = env->priv == PRV_U; + bool prv_s = env->priv == PRV_S; - if ((env->priv == PRV_S && - get_field(env->mstatus, MSTATUS_TW)) || - riscv_cpu_virt_enabled(env)) { + if (((prv_s || (!rvs && prv_u)) && get_field(env->mstatus, MSTATUS_TW)) || + (rvs && prv_u && !riscv_cpu_virt_enabled(env))) { + riscv_raise_exception(env, RISCV_EXCP_ILLEGAL_INST, GETPC()); + } else if (riscv_cpu_virt_enabled(env) && (prv_u || + (prv_s && get_field(env->hstatus, HSTATUS_VTW)))) { riscv_raise_exception(env, RISCV_EXCP_VIRT_INSTRUCTION_FAULT, GETPC()); } else { cs->halted = 1; -- 2.31.1 QEMU 5.1 changed the behaviour of the default boot for the RISC-V virt and sifive_u machines. This patch moves that change from the deprecated.rst file to the removed-features.rst file and the target-riscv.rst. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 4f1c261e7f69045ab8bb8926d85fe1d35e48ea5b.1620081256.git.alistair.francis@wdc.com --- docs/system/deprecated.rst | 19 ------------------- docs/system/removed-features.rst | 5 +++++ docs/system/target-riscv.rst | 13 ++++++++++++- 3 files changed, 17 insertions(+), 20 deletions(-) diff --git a/docs/system/deprecated.rst b/docs/system/deprecated.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/deprecated.rst +++ b/docs/system/deprecated.rst @@ -XXX,XX +XXX,XX @@ pcspk-audiodev=<name>``. ``tty`` and ``parport`` are aliases that will be removed. Instead, the actual backend names ``serial`` and ``parallel`` should be used. -RISC-V ``-bios`` (since 5.1) -'''''''''''''''''''''''''''' - -QEMU 4.1 introduced support for the -bios option in QEMU for RISC-V for the -RISC-V virt machine and sifive_u machine. QEMU 4.1 had no changes to the -default behaviour to avoid breakages. - -QEMU 5.1 changes the default behaviour from ``-bios none`` to ``-bios default``. - -QEMU 5.1 has three options: - 1. ``-bios default`` - This is the current default behavior if no -bios option - is included. This option will load the default OpenSBI firmware automatically. - The firmware is included with the QEMU release and no user interaction is - required. All a user needs to do is specify the kernel they want to boot - with the -kernel option - 2. ``-bios none`` - QEMU will not automatically load any firmware. It is up - to the user to load all the images they need. - 3. ``-bios <file>`` - Tells QEMU to load the specified file as the firmwrae. - Short-form boolean options (since 6.0) '''''''''''''''''''''''''''''''''''''' diff --git a/docs/system/removed-features.rst b/docs/system/removed-features.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/removed-features.rst +++ b/docs/system/removed-features.rst @@ -XXX,XX +XXX,XX @@ devices. Drives the board doesn't pick up can no longer be used with This option was undocumented and not used in the field. Use `-device usb-ccid`` instead. +RISC-V firmware not booted by default (removed in 5.1) +'''''''''''''''''''''''''''''''''''''''''''''''''''''' + +QEMU 5.1 changes the default behaviour from ``-bios none`` to ``-bios default`` +for the RISC-V ``virt`` machine and ``sifive_u`` machine. QEMU Machine Protocol (QMP) commands ------------------------------------ diff --git a/docs/system/target-riscv.rst b/docs/system/target-riscv.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/target-riscv.rst +++ b/docs/system/target-riscv.rst @@ -XXX,XX +XXX,XX @@ undocumented; you can get a complete list by running riscv/shakti-c riscv/sifive_u -RISC-V CPU features +RISC-V CPU firmware ------------------- + +When using the ``sifive_u`` or ``virt`` machine there are three different +firmware boot options: +1. ``-bios default`` - This is the default behaviour if no -bios option +is included. This option will load the default OpenSBI firmware automatically. +The firmware is included with the QEMU release and no user interaction is +required. All a user needs to do is specify the kernel they want to boot +with the -kernel option +2. ``-bios none`` - QEMU will not automatically load any firmware. It is up +to the user to load all the images they need. +3. ``-bios <file>`` - Tells QEMU to load the specified file as the firmware. -- 2.31.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Physical Memory Protection is a system feature. Avoid polluting the user-mode emulation by its definitions. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 20210516205333.696094-1-f4bug@amsat.org Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ enum { typedef struct CPURISCVState CPURISCVState; +#if !defined(CONFIG_USER_ONLY) #include "pmp.h" +#endif #define RV_VLEN_MAX 256 -- 2.31.1 From: Bin Meng <bmeng.cn@gmail.com> riscv_excp_names[] and riscv_intr_names[] are only referenced by target/riscv/cpu.c locally. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210514052435.2203156-1-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 2 -- target/riscv/cpu.c | 4 ++-- 2 files changed, 2 insertions(+), 4 deletions(-) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ static inline bool riscv_feature(CPURISCVState *env, int feature) extern const char * const riscv_int_regnames[]; extern const char * const riscv_fpr_regnames[]; -extern const char * const riscv_excp_names[]; -extern const char * const riscv_intr_names[]; const char *riscv_cpu_get_trap_name(target_ulong cause, bool async); void riscv_cpu_do_interrupt(CPUState *cpu); diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const char * const riscv_fpr_regnames[] = { "f30/ft10", "f31/ft11" }; -const char * const riscv_excp_names[] = { +static const char * const riscv_excp_names[] = { "misaligned_fetch", "fault_fetch", "illegal_instruction", @@ -XXX,XX +XXX,XX @@ const char * const riscv_excp_names[] = { "guest_store_page_fault", }; -const char * const riscv_intr_names[] = { +static const char * const riscv_intr_names[] = { "u_software", "s_software", "vs_software", -- 2.31.1 From: Changbin Du <changbin.du@gmail.com> This dumps the CSR mscratch/sscratch/satp and meanwhile aligns the output of CSR mtval/stval. Signed-off-by: Changbin Du <changbin.du@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 20210519155738.20486-1-changbin.du@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_dump_state(CPUState *cs, FILE *f, int flags) if (riscv_has_ext(env, RVH)) { qemu_fprintf(f, " %s " TARGET_FMT_lx "\n", "vscause ", env->vscause); } - qemu_fprintf(f, " %s " TARGET_FMT_lx "\n", "mtval ", env->mtval); - qemu_fprintf(f, " %s " TARGET_FMT_lx "\n", "stval ", env->stval); + qemu_fprintf(f, " %s " TARGET_FMT_lx "\n", "mtval ", env->mtval); + qemu_fprintf(f, " %s " TARGET_FMT_lx "\n", "stval ", env->stval); if (riscv_has_ext(env, RVH)) { qemu_fprintf(f, " %s " TARGET_FMT_lx "\n", "htval ", env->htval); qemu_fprintf(f, " %s " TARGET_FMT_lx "\n", "mtval2 ", env->mtval2); } + qemu_fprintf(f, " %s " TARGET_FMT_lx "\n", "mscratch", env->mscratch); + qemu_fprintf(f, " %s " TARGET_FMT_lx "\n", "sscratch", env->sscratch); + qemu_fprintf(f, " %s " TARGET_FMT_lx "\n", "satp ", env->satp); #endif for (i = 0; i < 32; i++) { -- 2.31.1 Although we construct epmp_operation in such a way that it can only be between 0 and 15 Coverity complains that we don't handle the other possible cases. To fix Coverity and make it easier for humans to read add a default case to the switch statement that calls g_assert_not_reached(). Fixes: CID 1453108 Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com> Message-id: ec5f225928eec448278c82fcb1f6805ee61dde82.1621550996.git.alistair.francis@wdc.com --- target/riscv/pmp.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/target/riscv/pmp.c b/target/riscv/pmp.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/pmp.c +++ b/target/riscv/pmp.c @@ -XXX,XX +XXX,XX @@ bool pmp_hart_has_privs(CPURISCVState *env, target_ulong addr, case 15: *allowed_privs = PMP_READ; break; + default: + g_assert_not_reached(); } } else { switch (epmp_operation) { @@ -XXX,XX +XXX,XX @@ bool pmp_hart_has_privs(CPURISCVState *env, target_ulong addr, case 7: *allowed_privs = PMP_READ | PMP_WRITE | PMP_EXEC; break; + default: + g_assert_not_reached(); } } } -- 2.31.1 From: LIU Zhiwei <zhiwei_liu@c-sky.com> Since commit e2e7168a214b0ed98dc357bba96816486a289762, if oprsz is still zero(as we don't use this field), simd_desc will trigger an assert. Besides, tcg_gen_gvec_*_ptr calls simd_desc in it's implementation. Here we pass the value to maxsz and oprsz to bypass the assert. Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210521054816.1784297-1-zhiwei_liu@c-sky.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/insn_trans/trans_rvv.c.inc | 89 ++++++++++++++----------- 1 file changed, 50 insertions(+), 39 deletions(-) diff --git a/target/riscv/insn_trans/trans_rvv.c.inc b/target/riscv/insn_trans/trans_rvv.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_rvv.c.inc +++ b/target/riscv/insn_trans/trans_rvv.c.inc @@ -XXX,XX +XXX,XX @@ static bool ldst_us_trans(uint32_t vd, uint32_t rs1, uint32_t data, * The first part is vlen in bytes, encoded in maxsz of simd_desc. * The second part is lmul, encoded in data of simd_desc. */ - desc = tcg_const_i32(simd_desc(0, s->vlen / 8, data)); + desc = tcg_const_i32(simd_desc(s->vlen / 8, s->vlen / 8, data)); gen_get_gpr(base, rs1); tcg_gen_addi_ptr(dest, cpu_env, vreg_ofs(s, vd)); @@ -XXX,XX +XXX,XX @@ static bool ldst_stride_trans(uint32_t vd, uint32_t rs1, uint32_t rs2, mask = tcg_temp_new_ptr(); base = tcg_temp_new(); stride = tcg_temp_new(); - desc = tcg_const_i32(simd_desc(0, s->vlen / 8, data)); + desc = tcg_const_i32(simd_desc(s->vlen / 8, s->vlen / 8, data)); gen_get_gpr(base, rs1); gen_get_gpr(stride, rs2); @@ -XXX,XX +XXX,XX @@ static bool ldst_index_trans(uint32_t vd, uint32_t rs1, uint32_t vs2, mask = tcg_temp_new_ptr(); index = tcg_temp_new_ptr(); base = tcg_temp_new(); - desc = tcg_const_i32(simd_desc(0, s->vlen / 8, data)); + desc = tcg_const_i32(simd_desc(s->vlen / 8, s->vlen / 8, data)); gen_get_gpr(base, rs1); tcg_gen_addi_ptr(dest, cpu_env, vreg_ofs(s, vd)); @@ -XXX,XX +XXX,XX @@ static bool ldff_trans(uint32_t vd, uint32_t rs1, uint32_t data, dest = tcg_temp_new_ptr(); mask = tcg_temp_new_ptr(); base = tcg_temp_new(); - desc = tcg_const_i32(simd_desc(0, s->vlen / 8, data)); + desc = tcg_const_i32(simd_desc(s->vlen / 8, s->vlen / 8, data)); gen_get_gpr(base, rs1); tcg_gen_addi_ptr(dest, cpu_env, vreg_ofs(s, vd)); @@ -XXX,XX +XXX,XX @@ static bool amo_trans(uint32_t vd, uint32_t rs1, uint32_t vs2, mask = tcg_temp_new_ptr(); index = tcg_temp_new_ptr(); base = tcg_temp_new(); - desc = tcg_const_i32(simd_desc(0, s->vlen / 8, data)); + desc = tcg_const_i32(simd_desc(s->vlen / 8, s->vlen / 8, data)); gen_get_gpr(base, rs1); tcg_gen_addi_ptr(dest, cpu_env, vreg_ofs(s, vd)); @@ -XXX,XX +XXX,XX @@ do_opivv_gvec(DisasContext *s, arg_rmrr *a, GVecGen3Fn *gvec_fn, data = FIELD_DP32(data, VDATA, LMUL, s->lmul); tcg_gen_gvec_4_ptr(vreg_ofs(s, a->rd), vreg_ofs(s, 0), vreg_ofs(s, a->rs1), vreg_ofs(s, a->rs2), - cpu_env, 0, s->vlen / 8, data, fn); + cpu_env, s->vlen / 8, s->vlen / 8, data, fn); } gen_set_label(over); return true; @@ -XXX,XX +XXX,XX @@ static bool opivx_trans(uint32_t vd, uint32_t rs1, uint32_t vs2, uint32_t vm, data = FIELD_DP32(data, VDATA, MLEN, s->mlen); data = FIELD_DP32(data, VDATA, VM, vm); data = FIELD_DP32(data, VDATA, LMUL, s->lmul); - desc = tcg_const_i32(simd_desc(0, s->vlen / 8, data)); + desc = tcg_const_i32(simd_desc(s->vlen / 8, s->vlen / 8, data)); tcg_gen_addi_ptr(dest, cpu_env, vreg_ofs(s, vd)); tcg_gen_addi_ptr(src2, cpu_env, vreg_ofs(s, vs2)); @@ -XXX,XX +XXX,XX @@ static bool opivi_trans(uint32_t vd, uint32_t imm, uint32_t vs2, uint32_t vm, data = FIELD_DP32(data, VDATA, MLEN, s->mlen); data = FIELD_DP32(data, VDATA, VM, vm); data = FIELD_DP32(data, VDATA, LMUL, s->lmul); - desc = tcg_const_i32(simd_desc(0, s->vlen / 8, data)); + desc = tcg_const_i32(simd_desc(s->vlen / 8, s->vlen / 8, data)); tcg_gen_addi_ptr(dest, cpu_env, vreg_ofs(s, vd)); tcg_gen_addi_ptr(src2, cpu_env, vreg_ofs(s, vs2)); @@ -XXX,XX +XXX,XX @@ static bool do_opivv_widen(DisasContext *s, arg_rmrr *a, tcg_gen_gvec_4_ptr(vreg_ofs(s, a->rd), vreg_ofs(s, 0), vreg_ofs(s, a->rs1), vreg_ofs(s, a->rs2), - cpu_env, 0, s->vlen / 8, + cpu_env, s->vlen / 8, s->vlen / 8, data, fn); gen_set_label(over); return true; @@ -XXX,XX +XXX,XX @@ static bool do_opiwv_widen(DisasContext *s, arg_rmrr *a, tcg_gen_gvec_4_ptr(vreg_ofs(s, a->rd), vreg_ofs(s, 0), vreg_ofs(s, a->rs1), vreg_ofs(s, a->rs2), - cpu_env, 0, s->vlen / 8, data, fn); + cpu_env, s->vlen / 8, s->vlen / 8, data, fn); gen_set_label(over); return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_##NAME(DisasContext *s, arg_rmrr *a) \ data = FIELD_DP32(data, VDATA, LMUL, s->lmul); \ tcg_gen_gvec_4_ptr(vreg_ofs(s, a->rd), vreg_ofs(s, 0), \ vreg_ofs(s, a->rs1), \ - vreg_ofs(s, a->rs2), cpu_env, 0, \ - s->vlen / 8, data, fns[s->sew]); \ + vreg_ofs(s, a->rs2), cpu_env, \ + s->vlen / 8, s->vlen / 8, data, \ + fns[s->sew]); \ gen_set_label(over); \ return true; \ } \ @@ -XXX,XX +XXX,XX @@ static bool trans_##NAME(DisasContext *s, arg_rmrr *a) \ data = FIELD_DP32(data, VDATA, LMUL, s->lmul); \ tcg_gen_gvec_4_ptr(vreg_ofs(s, a->rd), vreg_ofs(s, 0), \ vreg_ofs(s, a->rs1), \ - vreg_ofs(s, a->rs2), cpu_env, 0, \ - s->vlen / 8, data, fns[s->sew]); \ + vreg_ofs(s, a->rs2), cpu_env, \ + s->vlen / 8, s->vlen / 8, data, \ + fns[s->sew]); \ gen_set_label(over); \ return true; \ } \ @@ -XXX,XX +XXX,XX @@ static bool trans_vmv_v_x(DisasContext *s, arg_vmv_v_x *a) }; tcg_gen_ext_tl_i64(s1_i64, s1); - desc = tcg_const_i32(simd_desc(0, s->vlen / 8, data)); + desc = tcg_const_i32(simd_desc(s->vlen / 8, s->vlen / 8, data)); tcg_gen_addi_ptr(dest, cpu_env, vreg_ofs(s, a->rd)); fns[s->sew](dest, s1_i64, cpu_env, desc); @@ -XXX,XX +XXX,XX @@ static bool trans_vmv_v_i(DisasContext *s, arg_vmv_v_i *a) s1 = tcg_const_i64(simm); dest = tcg_temp_new_ptr(); - desc = tcg_const_i32(simd_desc(0, s->vlen / 8, data)); + desc = tcg_const_i32(simd_desc(s->vlen / 8, s->vlen / 8, data)); tcg_gen_addi_ptr(dest, cpu_env, vreg_ofs(s, a->rd)); fns[s->sew](dest, s1, cpu_env, desc); @@ -XXX,XX +XXX,XX @@ static bool trans_##NAME(DisasContext *s, arg_rmrr *a) \ data = FIELD_DP32(data, VDATA, LMUL, s->lmul); \ tcg_gen_gvec_4_ptr(vreg_ofs(s, a->rd), vreg_ofs(s, 0), \ vreg_ofs(s, a->rs1), \ - vreg_ofs(s, a->rs2), cpu_env, 0, \ - s->vlen / 8, data, fns[s->sew - 1]); \ + vreg_ofs(s, a->rs2), cpu_env, \ + s->vlen / 8, s->vlen / 8, data, \ + fns[s->sew - 1]); \ gen_set_label(over); \ return true; \ } \ @@ -XXX,XX +XXX,XX @@ static bool opfvf_trans(uint32_t vd, uint32_t rs1, uint32_t vs2, dest = tcg_temp_new_ptr(); mask = tcg_temp_new_ptr(); src2 = tcg_temp_new_ptr(); - desc = tcg_const_i32(simd_desc(0, s->vlen / 8, data)); + desc = tcg_const_i32(simd_desc(s->vlen / 8, s->vlen / 8, data)); tcg_gen_addi_ptr(dest, cpu_env, vreg_ofs(s, vd)); tcg_gen_addi_ptr(src2, cpu_env, vreg_ofs(s, vs2)); @@ -XXX,XX +XXX,XX @@ static bool trans_##NAME(DisasContext *s, arg_rmrr *a) \ data = FIELD_DP32(data, VDATA, LMUL, s->lmul); \ tcg_gen_gvec_4_ptr(vreg_ofs(s, a->rd), vreg_ofs(s, 0), \ vreg_ofs(s, a->rs1), \ - vreg_ofs(s, a->rs2), cpu_env, 0, \ - s->vlen / 8, data, fns[s->sew - 1]); \ + vreg_ofs(s, a->rs2), cpu_env, \ + s->vlen / 8, s->vlen / 8, data, \ + fns[s->sew - 1]); \ gen_set_label(over); \ return true; \ } \ @@ -XXX,XX +XXX,XX @@ static bool trans_##NAME(DisasContext *s, arg_rmrr *a) \ data = FIELD_DP32(data, VDATA, LMUL, s->lmul); \ tcg_gen_gvec_4_ptr(vreg_ofs(s, a->rd), vreg_ofs(s, 0), \ vreg_ofs(s, a->rs1), \ - vreg_ofs(s, a->rs2), cpu_env, 0, \ - s->vlen / 8, data, fns[s->sew - 1]); \ + vreg_ofs(s, a->rs2), cpu_env, \ + s->vlen / 8, s->vlen / 8, data, \ + fns[s->sew - 1]); \ gen_set_label(over); \ return true; \ } \ @@ -XXX,XX +XXX,XX @@ static bool trans_##NAME(DisasContext *s, arg_rmr *a) \ data = FIELD_DP32(data, VDATA, VM, a->vm); \ data = FIELD_DP32(data, VDATA, LMUL, s->lmul); \ tcg_gen_gvec_3_ptr(vreg_ofs(s, a->rd), vreg_ofs(s, 0), \ - vreg_ofs(s, a->rs2), cpu_env, 0, \ - s->vlen / 8, data, fns[s->sew - 1]); \ + vreg_ofs(s, a->rs2), cpu_env, \ + s->vlen / 8, s->vlen / 8, data, \ + fns[s->sew - 1]); \ gen_set_label(over); \ return true; \ } \ @@ -XXX,XX +XXX,XX @@ static bool trans_vfmv_v_f(DisasContext *s, arg_vfmv_v_f *a) tcg_gen_brcondi_tl(TCG_COND_EQ, cpu_vl, 0, over); dest = tcg_temp_new_ptr(); - desc = tcg_const_i32(simd_desc(0, s->vlen / 8, data)); + desc = tcg_const_i32(simd_desc(s->vlen / 8, s->vlen / 8, data)); tcg_gen_addi_ptr(dest, cpu_env, vreg_ofs(s, a->rd)); fns[s->sew - 1](dest, cpu_fpr[a->rs1], cpu_env, desc); @@ -XXX,XX +XXX,XX @@ static bool trans_##NAME(DisasContext *s, arg_rmr *a) \ data = FIELD_DP32(data, VDATA, VM, a->vm); \ data = FIELD_DP32(data, VDATA, LMUL, s->lmul); \ tcg_gen_gvec_3_ptr(vreg_ofs(s, a->rd), vreg_ofs(s, 0), \ - vreg_ofs(s, a->rs2), cpu_env, 0, \ - s->vlen / 8, data, fns[s->sew - 1]); \ + vreg_ofs(s, a->rs2), cpu_env, \ + s->vlen / 8, s->vlen / 8, data, \ + fns[s->sew - 1]); \ gen_set_label(over); \ return true; \ } \ @@ -XXX,XX +XXX,XX @@ static bool trans_##NAME(DisasContext *s, arg_rmr *a) \ data = FIELD_DP32(data, VDATA, VM, a->vm); \ data = FIELD_DP32(data, VDATA, LMUL, s->lmul); \ tcg_gen_gvec_3_ptr(vreg_ofs(s, a->rd), vreg_ofs(s, 0), \ - vreg_ofs(s, a->rs2), cpu_env, 0, \ - s->vlen / 8, data, fns[s->sew - 1]); \ + vreg_ofs(s, a->rs2), cpu_env, \ + s->vlen / 8, s->vlen / 8, data, \ + fns[s->sew - 1]); \ gen_set_label(over); \ return true; \ } \ @@ -XXX,XX +XXX,XX @@ static bool trans_##NAME(DisasContext *s, arg_r *a) \ data = FIELD_DP32(data, VDATA, LMUL, s->lmul); \ tcg_gen_gvec_4_ptr(vreg_ofs(s, a->rd), vreg_ofs(s, 0), \ vreg_ofs(s, a->rs1), \ - vreg_ofs(s, a->rs2), cpu_env, 0, \ - s->vlen / 8, data, fn); \ + vreg_ofs(s, a->rs2), cpu_env, \ + s->vlen / 8, s->vlen / 8, data, fn); \ gen_set_label(over); \ return true; \ } \ @@ -XXX,XX +XXX,XX @@ static bool trans_vmpopc_m(DisasContext *s, arg_rmr *a) mask = tcg_temp_new_ptr(); src2 = tcg_temp_new_ptr(); dst = tcg_temp_new(); - desc = tcg_const_i32(simd_desc(0, s->vlen / 8, data)); + desc = tcg_const_i32(simd_desc(s->vlen / 8, s->vlen / 8, data)); tcg_gen_addi_ptr(src2, cpu_env, vreg_ofs(s, a->rs2)); tcg_gen_addi_ptr(mask, cpu_env, vreg_ofs(s, 0)); @@ -XXX,XX +XXX,XX @@ static bool trans_vmfirst_m(DisasContext *s, arg_rmr *a) mask = tcg_temp_new_ptr(); src2 = tcg_temp_new_ptr(); dst = tcg_temp_new(); - desc = tcg_const_i32(simd_desc(0, s->vlen / 8, data)); + desc = tcg_const_i32(simd_desc(s->vlen / 8, s->vlen / 8, data)); tcg_gen_addi_ptr(src2, cpu_env, vreg_ofs(s, a->rs2)); tcg_gen_addi_ptr(mask, cpu_env, vreg_ofs(s, 0)); @@ -XXX,XX +XXX,XX @@ static bool trans_##NAME(DisasContext *s, arg_rmr *a) \ data = FIELD_DP32(data, VDATA, LMUL, s->lmul); \ tcg_gen_gvec_3_ptr(vreg_ofs(s, a->rd), \ vreg_ofs(s, 0), vreg_ofs(s, a->rs2), \ - cpu_env, 0, s->vlen / 8, data, fn); \ + cpu_env, s->vlen / 8, s->vlen / 8, \ + data, fn); \ gen_set_label(over); \ return true; \ } \ @@ -XXX,XX +XXX,XX @@ static bool trans_viota_m(DisasContext *s, arg_viota_m *a) gen_helper_viota_m_w, gen_helper_viota_m_d, }; tcg_gen_gvec_3_ptr(vreg_ofs(s, a->rd), vreg_ofs(s, 0), - vreg_ofs(s, a->rs2), cpu_env, 0, - s->vlen / 8, data, fns[s->sew]); + vreg_ofs(s, a->rs2), cpu_env, + s->vlen / 8, s->vlen / 8, data, fns[s->sew]); gen_set_label(over); return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_vid_v(DisasContext *s, arg_vid_v *a) gen_helper_vid_v_w, gen_helper_vid_v_d, }; tcg_gen_gvec_2_ptr(vreg_ofs(s, a->rd), vreg_ofs(s, 0), - cpu_env, 0, s->vlen / 8, data, fns[s->sew]); + cpu_env, s->vlen / 8, s->vlen / 8, + data, fns[s->sew]); gen_set_label(over); return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_vcompress_vm(DisasContext *s, arg_r *a) data = FIELD_DP32(data, VDATA, LMUL, s->lmul); tcg_gen_gvec_4_ptr(vreg_ofs(s, a->rd), vreg_ofs(s, 0), vreg_ofs(s, a->rs1), vreg_ofs(s, a->rs2), - cpu_env, 0, s->vlen / 8, data, fns[s->sew]); + cpu_env, s->vlen / 8, s->vlen / 8, data, + fns[s->sew]); gen_set_label(over); return true; } -- 2.31.1 From: Kito Cheng <kito.cheng@sifive.com> Signed-off-by: Kito Cheng <kito.cheng@sifive.com> Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210505160620.15723-2-frank.chang@sifive.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/insn32.decode | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/target/riscv/insn32.decode b/target/riscv/insn32.decode index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn32.decode +++ b/target/riscv/insn32.decode @@ -XXX,XX +XXX,XX @@ %rd 7:5 %sh5 20:5 -%sh10 20:10 +%sh7 20:7 %csr 20:12 %rm 12:3 %nf 29:3 !function=ex_plus_1 @@ -XXX,XX +XXX,XX @@ @u .................... ..... ....... &u imm=%imm_u %rd @j .................... ..... ....... &j imm=%imm_j %rd -@sh ...... ...... ..... ... ..... ....... &shift shamt=%sh10 %rs1 %rd +@sh ...... ...... ..... ... ..... ....... &shift shamt=%sh7 %rs1 %rd @csr ............ ..... ... ..... ....... %csr %rs1 %rd @atom_ld ..... aq:1 rl:1 ..... ........ ..... ....... &atomic rs2=0 %rs1 %rd @@ -XXX,XX +XXX,XX @@ sltiu ............ ..... 011 ..... 0010011 @i xori ............ ..... 100 ..... 0010011 @i ori ............ ..... 110 ..... 0010011 @i andi ............ ..... 111 ..... 0010011 @i -slli 00.... ...... ..... 001 ..... 0010011 @sh -srli 00.... ...... ..... 101 ..... 0010011 @sh -srai 01.... ...... ..... 101 ..... 0010011 @sh +slli 00000. ...... ..... 001 ..... 0010011 @sh +srli 00000. ...... ..... 101 ..... 0010011 @sh +srai 01000. ...... ..... 101 ..... 0010011 @sh add 0000000 ..... ..... 000 ..... 0110011 @r sub 0100000 ..... ..... 000 ..... 0110011 @r sll 0000000 ..... ..... 001 ..... 0110011 @r -- 2.31.1 From: Kito Cheng <kito.cheng@sifive.com> Signed-off-by: Kito Cheng <kito.cheng@sifive.com> Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210505160620.15723-3-frank.chang@sifive.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 1 + target/riscv/insn32.decode | 11 ++++++- target/riscv/translate.c | 38 +++++++++++++++++++++ target/riscv/insn_trans/trans_rvb.c.inc | 44 +++++++++++++++++++++++++ 4 files changed, 93 insertions(+), 1 deletion(-) create mode 100644 target/riscv/insn_trans/trans_rvb.c.inc diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ #define RVS RV('S') #define RVU RV('U') #define RVH RV('H') +#define RVB RV('B') /* S extension denotes that Supervisor mode exists, however it is possible to have a core that support S mode but does not have an MMU and there diff --git a/target/riscv/insn32.decode b/target/riscv/insn32.decode index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn32.decode +++ b/target/riscv/insn32.decode @@ -XXX,XX +XXX,XX @@ &i imm rs1 rd &j imm rd &r rd rs1 rs2 +&r2 rd rs1 &s imm rs1 rs2 &u imm rd &shift shamt rs1 rd @@ -XXX,XX +XXX,XX @@ @r4_rm ..... .. ..... ..... ... ..... ....... %rs3 %rs2 %rs1 %rm %rd @r_rm ....... ..... ..... ... ..... ....... %rs2 %rs1 %rm %rd @r2_rm ....... ..... ..... ... ..... ....... %rs1 %rm %rd -@r2 ....... ..... ..... ... ..... ....... %rs1 %rd +@r2 ....... ..... ..... ... ..... ....... &r2 %rs1 %rd @r2_nfvm ... ... vm:1 ..... ..... ... ..... ....... &r2nfvm %nf %rs1 %rd @r2_vm ...... vm:1 ..... ..... ... ..... ....... &rmr %rs2 %rd @r1_vm ...... vm:1 ..... ..... ... ..... ....... %rd @@ -XXX,XX +XXX,XX @@ vamomind_v 10000 . . ..... ..... 111 ..... 0101111 @r_wdvm vamomaxd_v 10100 . . ..... ..... 111 ..... 0101111 @r_wdvm vamominud_v 11000 . . ..... ..... 111 ..... 0101111 @r_wdvm vamomaxud_v 11100 . . ..... ..... 111 ..... 0101111 @r_wdvm + +# *** RV32B Standard Extension *** +clz 011000 000000 ..... 001 ..... 0010011 @r2 +ctz 011000 000001 ..... 001 ..... 0010011 @r2 + +# *** RV64B Standard Extension (in addition to RV32B) *** +clzw 0110000 00000 ..... 001 ..... 0011011 @r2 +ctzw 0110000 00001 ..... 001 ..... 0011011 @r2 diff --git a/target/riscv/translate.c b/target/riscv/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/translate.c +++ b/target/riscv/translate.c @@ -XXX,XX +XXX,XX @@ static bool gen_arith_div_uw(DisasContext *ctx, arg_r *a, return true; } +static void gen_ctzw(TCGv ret, TCGv arg1) +{ + tcg_gen_ori_tl(ret, arg1, (target_ulong)MAKE_64BIT_MASK(32, 32)); + tcg_gen_ctzi_tl(ret, ret, 64); +} + +static void gen_clzw(TCGv ret, TCGv arg1) +{ + tcg_gen_ext32u_tl(ret, arg1); + tcg_gen_clzi_tl(ret, ret, 64); + tcg_gen_subi_tl(ret, ret, 32); +} + static bool gen_arith(DisasContext *ctx, arg_r *a, void(*func)(TCGv, TCGv, TCGv)) { @@ -XXX,XX +XXX,XX @@ static uint32_t opcode_at(DisasContextBase *dcbase, target_ulong pc) return cpu_ldl_code(env, pc); } +static void gen_ctz(TCGv ret, TCGv arg1) +{ + tcg_gen_ctzi_tl(ret, arg1, TARGET_LONG_BITS); +} + +static void gen_clz(TCGv ret, TCGv arg1) +{ + tcg_gen_clzi_tl(ret, arg1, TARGET_LONG_BITS); +} + +static bool gen_unary(DisasContext *ctx, arg_r2 *a, + void(*func)(TCGv, TCGv)) +{ + TCGv source = tcg_temp_new(); + + gen_get_gpr(source, a->rs1); + + (*func)(source, source); + + gen_set_gpr(a->rd, source); + tcg_temp_free(source); + return true; +} + /* Include insn module translation function */ #include "insn_trans/trans_rvi.c.inc" #include "insn_trans/trans_rvm.c.inc" @@ -XXX,XX +XXX,XX @@ static uint32_t opcode_at(DisasContextBase *dcbase, target_ulong pc) #include "insn_trans/trans_rvd.c.inc" #include "insn_trans/trans_rvh.c.inc" #include "insn_trans/trans_rvv.c.inc" +#include "insn_trans/trans_rvb.c.inc" #include "insn_trans/trans_privileged.c.inc" /* Include the auto-generated decoder for 16 bit insn */ diff --git a/target/riscv/insn_trans/trans_rvb.c.inc b/target/riscv/insn_trans/trans_rvb.c.inc new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/target/riscv/insn_trans/trans_rvb.c.inc @@ -XXX,XX +XXX,XX @@ +/* + * RISC-V translation routines for the RVB Standard Extension. + * + * Copyright (c) 2020 Kito Cheng, kito.cheng@sifive.com + * Copyright (c) 2020 Frank Chang, frank.chang@sifive.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2 or later, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +static bool trans_clz(DisasContext *ctx, arg_clz *a) +{ + REQUIRE_EXT(ctx, RVB); + return gen_unary(ctx, a, gen_clz); +} + +static bool trans_ctz(DisasContext *ctx, arg_ctz *a) +{ + REQUIRE_EXT(ctx, RVB); + return gen_unary(ctx, a, gen_ctz); +} + +static bool trans_clzw(DisasContext *ctx, arg_clzw *a) +{ + REQUIRE_64BIT(ctx); + REQUIRE_EXT(ctx, RVB); + return gen_unary(ctx, a, gen_clzw); +} + +static bool trans_ctzw(DisasContext *ctx, arg_ctzw *a) +{ + REQUIRE_64BIT(ctx); + REQUIRE_EXT(ctx, RVB); + return gen_unary(ctx, a, gen_ctzw); +} -- 2.31.1 From: Frank Chang <frank.chang@sifive.com> Signed-off-by: Kito Cheng <kito.cheng@sifive.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Frank Chang <frank.chang@sifive.com> Message-id: 20210505160620.15723-4-frank.chang@sifive.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/insn32.decode | 2 ++ target/riscv/translate.c | 6 ++++++ target/riscv/insn_trans/trans_rvb.c.inc | 13 +++++++++++++ 3 files changed, 21 insertions(+) diff --git a/target/riscv/insn32.decode b/target/riscv/insn32.decode index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn32.decode +++ b/target/riscv/insn32.decode @@ -XXX,XX +XXX,XX @@ vamomaxud_v 11100 . . ..... ..... 111 ..... 0101111 @r_wdvm # *** RV32B Standard Extension *** clz 011000 000000 ..... 001 ..... 0010011 @r2 ctz 011000 000001 ..... 001 ..... 0010011 @r2 +cpop 011000 000010 ..... 001 ..... 0010011 @r2 # *** RV64B Standard Extension (in addition to RV32B) *** clzw 0110000 00000 ..... 001 ..... 0011011 @r2 ctzw 0110000 00001 ..... 001 ..... 0011011 @r2 +cpopw 0110000 00010 ..... 001 ..... 0011011 @r2 diff --git a/target/riscv/translate.c b/target/riscv/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/translate.c +++ b/target/riscv/translate.c @@ -XXX,XX +XXX,XX @@ static void gen_clzw(TCGv ret, TCGv arg1) tcg_gen_subi_tl(ret, ret, 32); } +static void gen_cpopw(TCGv ret, TCGv arg1) +{ + tcg_gen_ext32u_tl(arg1, arg1); + tcg_gen_ctpop_tl(ret, arg1); +} + static bool gen_arith(DisasContext *ctx, arg_r *a, void(*func)(TCGv, TCGv, TCGv)) { diff --git a/target/riscv/insn_trans/trans_rvb.c.inc b/target/riscv/insn_trans/trans_rvb.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_rvb.c.inc +++ b/target/riscv/insn_trans/trans_rvb.c.inc @@ -XXX,XX +XXX,XX @@ static bool trans_ctz(DisasContext *ctx, arg_ctz *a) return gen_unary(ctx, a, gen_ctz); } +static bool trans_cpop(DisasContext *ctx, arg_cpop *a) +{ + REQUIRE_EXT(ctx, RVB); + return gen_unary(ctx, a, tcg_gen_ctpop_tl); +} + static bool trans_clzw(DisasContext *ctx, arg_clzw *a) { REQUIRE_64BIT(ctx); @@ -XXX,XX +XXX,XX @@ static bool trans_ctzw(DisasContext *ctx, arg_ctzw *a) REQUIRE_EXT(ctx, RVB); return gen_unary(ctx, a, gen_ctzw); } + +static bool trans_cpopw(DisasContext *ctx, arg_cpopw *a) +{ + REQUIRE_64BIT(ctx); + REQUIRE_EXT(ctx, RVB); + return gen_unary(ctx, a, gen_cpopw); +} -- 2.31.1 From: Kito Cheng <kito.cheng@sifive.com> Signed-off-by: Kito Cheng <kito.cheng@sifive.com> Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210505160620.15723-5-frank.chang@sifive.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/insn32.decode | 3 +++ target/riscv/insn_trans/trans_rvb.c.inc | 18 ++++++++++++++++++ 2 files changed, 21 insertions(+) diff --git a/target/riscv/insn32.decode b/target/riscv/insn32.decode index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn32.decode +++ b/target/riscv/insn32.decode @@ -XXX,XX +XXX,XX @@ vamomaxud_v 11100 . . ..... ..... 111 ..... 0101111 @r_wdvm clz 011000 000000 ..... 001 ..... 0010011 @r2 ctz 011000 000001 ..... 001 ..... 0010011 @r2 cpop 011000 000010 ..... 001 ..... 0010011 @r2 +andn 0100000 .......... 111 ..... 0110011 @r +orn 0100000 .......... 110 ..... 0110011 @r +xnor 0100000 .......... 100 ..... 0110011 @r # *** RV64B Standard Extension (in addition to RV32B) *** clzw 0110000 00000 ..... 001 ..... 0011011 @r2 diff --git a/target/riscv/insn_trans/trans_rvb.c.inc b/target/riscv/insn_trans/trans_rvb.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_rvb.c.inc +++ b/target/riscv/insn_trans/trans_rvb.c.inc @@ -XXX,XX +XXX,XX @@ static bool trans_cpop(DisasContext *ctx, arg_cpop *a) return gen_unary(ctx, a, tcg_gen_ctpop_tl); } +static bool trans_andn(DisasContext *ctx, arg_andn *a) +{ + REQUIRE_EXT(ctx, RVB); + return gen_arith(ctx, a, tcg_gen_andc_tl); +} + +static bool trans_orn(DisasContext *ctx, arg_orn *a) +{ + REQUIRE_EXT(ctx, RVB); + return gen_arith(ctx, a, tcg_gen_orc_tl); +} + +static bool trans_xnor(DisasContext *ctx, arg_xnor *a) +{ + REQUIRE_EXT(ctx, RVB); + return gen_arith(ctx, a, tcg_gen_eqv_tl); +} + static bool trans_clzw(DisasContext *ctx, arg_clzw *a) { REQUIRE_64BIT(ctx); -- 2.31.1 From: Kito Cheng <kito.cheng@sifive.com> Signed-off-by: Kito Cheng <kito.cheng@sifive.com> Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210505160620.15723-6-frank.chang@sifive.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/insn32.decode | 6 ++++ target/riscv/translate.c | 40 +++++++++++++++++++++++++ target/riscv/insn_trans/trans_rvb.c.inc | 32 ++++++++++++++++++++ 3 files changed, 78 insertions(+) diff --git a/target/riscv/insn32.decode b/target/riscv/insn32.decode index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn32.decode +++ b/target/riscv/insn32.decode @@ -XXX,XX +XXX,XX @@ cpop 011000 000010 ..... 001 ..... 0010011 @r2 andn 0100000 .......... 111 ..... 0110011 @r orn 0100000 .......... 110 ..... 0110011 @r xnor 0100000 .......... 100 ..... 0110011 @r +pack 0000100 .......... 100 ..... 0110011 @r +packu 0100100 .......... 100 ..... 0110011 @r +packh 0000100 .......... 111 ..... 0110011 @r # *** RV64B Standard Extension (in addition to RV32B) *** clzw 0110000 00000 ..... 001 ..... 0011011 @r2 ctzw 0110000 00001 ..... 001 ..... 0011011 @r2 cpopw 0110000 00010 ..... 001 ..... 0011011 @r2 + +packw 0000100 .......... 100 ..... 0111011 @r +packuw 0100100 .......... 100 ..... 0111011 @r diff --git a/target/riscv/translate.c b/target/riscv/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/translate.c +++ b/target/riscv/translate.c @@ -XXX,XX +XXX,XX @@ static bool gen_arith_div_uw(DisasContext *ctx, arg_r *a, return true; } +static void gen_pack(TCGv ret, TCGv arg1, TCGv arg2) +{ + tcg_gen_deposit_tl(ret, arg1, arg2, + TARGET_LONG_BITS / 2, + TARGET_LONG_BITS / 2); +} + +static void gen_packu(TCGv ret, TCGv arg1, TCGv arg2) +{ + TCGv t = tcg_temp_new(); + tcg_gen_shri_tl(t, arg1, TARGET_LONG_BITS / 2); + tcg_gen_deposit_tl(ret, arg2, t, 0, TARGET_LONG_BITS / 2); + tcg_temp_free(t); +} + +static void gen_packh(TCGv ret, TCGv arg1, TCGv arg2) +{ + TCGv t = tcg_temp_new(); + tcg_gen_ext8u_tl(t, arg2); + tcg_gen_deposit_tl(ret, arg1, t, 8, TARGET_LONG_BITS - 8); + tcg_temp_free(t); +} + static void gen_ctzw(TCGv ret, TCGv arg1) { tcg_gen_ori_tl(ret, arg1, (target_ulong)MAKE_64BIT_MASK(32, 32)); @@ -XXX,XX +XXX,XX @@ static void gen_cpopw(TCGv ret, TCGv arg1) tcg_gen_ctpop_tl(ret, arg1); } +static void gen_packw(TCGv ret, TCGv arg1, TCGv arg2) +{ + TCGv t = tcg_temp_new(); + tcg_gen_ext16s_tl(t, arg2); + tcg_gen_deposit_tl(ret, arg1, t, 16, 48); + tcg_temp_free(t); +} + +static void gen_packuw(TCGv ret, TCGv arg1, TCGv arg2) +{ + TCGv t = tcg_temp_new(); + tcg_gen_shri_tl(t, arg1, 16); + tcg_gen_deposit_tl(ret, arg2, t, 0, 16); + tcg_gen_ext32s_tl(ret, ret); + tcg_temp_free(t); +} + static bool gen_arith(DisasContext *ctx, arg_r *a, void(*func)(TCGv, TCGv, TCGv)) { diff --git a/target/riscv/insn_trans/trans_rvb.c.inc b/target/riscv/insn_trans/trans_rvb.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_rvb.c.inc +++ b/target/riscv/insn_trans/trans_rvb.c.inc @@ -XXX,XX +XXX,XX @@ static bool trans_xnor(DisasContext *ctx, arg_xnor *a) return gen_arith(ctx, a, tcg_gen_eqv_tl); } +static bool trans_pack(DisasContext *ctx, arg_pack *a) +{ + REQUIRE_EXT(ctx, RVB); + return gen_arith(ctx, a, gen_pack); +} + +static bool trans_packu(DisasContext *ctx, arg_packu *a) +{ + REQUIRE_EXT(ctx, RVB); + return gen_arith(ctx, a, gen_packu); +} + +static bool trans_packh(DisasContext *ctx, arg_packh *a) +{ + REQUIRE_EXT(ctx, RVB); + return gen_arith(ctx, a, gen_packh); +} + static bool trans_clzw(DisasContext *ctx, arg_clzw *a) { REQUIRE_64BIT(ctx); @@ -XXX,XX +XXX,XX @@ static bool trans_cpopw(DisasContext *ctx, arg_cpopw *a) REQUIRE_EXT(ctx, RVB); return gen_unary(ctx, a, gen_cpopw); } + +static bool trans_packw(DisasContext *ctx, arg_packw *a) +{ + REQUIRE_64BIT(ctx); + REQUIRE_EXT(ctx, RVB); + return gen_arith(ctx, a, gen_packw); +} + +static bool trans_packuw(DisasContext *ctx, arg_packuw *a) +{ + REQUIRE_64BIT(ctx); + REQUIRE_EXT(ctx, RVB); + return gen_arith(ctx, a, gen_packuw); +} -- 2.31.1 From: Kito Cheng <kito.cheng@sifive.com> Signed-off-by: Kito Cheng <kito.cheng@sifive.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Frank Chang <frank.chang@sifive.com> Message-id: 20210505160620.15723-7-frank.chang@sifive.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/insn32.decode | 4 ++++ target/riscv/insn_trans/trans_rvb.c.inc | 24 ++++++++++++++++++++++++ 2 files changed, 28 insertions(+) diff --git a/target/riscv/insn32.decode b/target/riscv/insn32.decode index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn32.decode +++ b/target/riscv/insn32.decode @@ -XXX,XX +XXX,XX @@ xnor 0100000 .......... 100 ..... 0110011 @r pack 0000100 .......... 100 ..... 0110011 @r packu 0100100 .......... 100 ..... 0110011 @r packh 0000100 .......... 111 ..... 0110011 @r +min 0000101 .......... 100 ..... 0110011 @r +minu 0000101 .......... 101 ..... 0110011 @r +max 0000101 .......... 110 ..... 0110011 @r +maxu 0000101 .......... 111 ..... 0110011 @r # *** RV64B Standard Extension (in addition to RV32B) *** clzw 0110000 00000 ..... 001 ..... 0011011 @r2 diff --git a/target/riscv/insn_trans/trans_rvb.c.inc b/target/riscv/insn_trans/trans_rvb.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_rvb.c.inc +++ b/target/riscv/insn_trans/trans_rvb.c.inc @@ -XXX,XX +XXX,XX @@ static bool trans_packh(DisasContext *ctx, arg_packh *a) return gen_arith(ctx, a, gen_packh); } +static bool trans_min(DisasContext *ctx, arg_min *a) +{ + REQUIRE_EXT(ctx, RVB); + return gen_arith(ctx, a, tcg_gen_smin_tl); +} + +static bool trans_max(DisasContext *ctx, arg_max *a) +{ + REQUIRE_EXT(ctx, RVB); + return gen_arith(ctx, a, tcg_gen_smax_tl); +} + +static bool trans_minu(DisasContext *ctx, arg_minu *a) +{ + REQUIRE_EXT(ctx, RVB); + return gen_arith(ctx, a, tcg_gen_umin_tl); +} + +static bool trans_maxu(DisasContext *ctx, arg_maxu *a) +{ + REQUIRE_EXT(ctx, RVB); + return gen_arith(ctx, a, tcg_gen_umax_tl); +} + static bool trans_clzw(DisasContext *ctx, arg_clzw *a) { REQUIRE_64BIT(ctx); -- 2.31.1 From: Kito Cheng <kito.cheng@sifive.com> Signed-off-by: Kito Cheng <kito.cheng@sifive.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Frank Chang <frank.chang@sifive.com> Message-id: 20210505160620.15723-8-frank.chang@sifive.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/insn32.decode | 3 +++ target/riscv/insn_trans/trans_rvb.c.inc | 12 ++++++++++++ 2 files changed, 15 insertions(+) diff --git a/target/riscv/insn32.decode b/target/riscv/insn32.decode index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn32.decode +++ b/target/riscv/insn32.decode @@ -XXX,XX +XXX,XX @@ vamomaxud_v 11100 . . ..... ..... 111 ..... 0101111 @r_wdvm clz 011000 000000 ..... 001 ..... 0010011 @r2 ctz 011000 000001 ..... 001 ..... 0010011 @r2 cpop 011000 000010 ..... 001 ..... 0010011 @r2 +sext_b 011000 000100 ..... 001 ..... 0010011 @r2 +sext_h 011000 000101 ..... 001 ..... 0010011 @r2 + andn 0100000 .......... 111 ..... 0110011 @r orn 0100000 .......... 110 ..... 0110011 @r xnor 0100000 .......... 100 ..... 0110011 @r diff --git a/target/riscv/insn_trans/trans_rvb.c.inc b/target/riscv/insn_trans/trans_rvb.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_rvb.c.inc +++ b/target/riscv/insn_trans/trans_rvb.c.inc @@ -XXX,XX +XXX,XX @@ static bool trans_maxu(DisasContext *ctx, arg_maxu *a) return gen_arith(ctx, a, tcg_gen_umax_tl); } +static bool trans_sext_b(DisasContext *ctx, arg_sext_b *a) +{ + REQUIRE_EXT(ctx, RVB); + return gen_unary(ctx, a, tcg_gen_ext8s_tl); +} + +static bool trans_sext_h(DisasContext *ctx, arg_sext_h *a) +{ + REQUIRE_EXT(ctx, RVB); + return gen_unary(ctx, a, tcg_gen_ext16s_tl); +} + static bool trans_clzw(DisasContext *ctx, arg_clzw *a) { REQUIRE_64BIT(ctx); -- 2.31.1 From: Frank Chang <frank.chang@sifive.com> Add gen_shifti() and gen_shiftiw() helper functions to reuse the same interfaces for immediate shift instructions. Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210505160620.15723-9-frank.chang@sifive.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/translate.c | 39 ++++++++++++++++++ target/riscv/insn_trans/trans_rvi.c.inc | 54 ++----------------------- 2 files changed, 43 insertions(+), 50 deletions(-) diff --git a/target/riscv/translate.c b/target/riscv/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/translate.c +++ b/target/riscv/translate.c @@ -XXX,XX +XXX,XX @@ static uint32_t opcode_at(DisasContextBase *dcbase, target_ulong pc) return cpu_ldl_code(env, pc); } +static bool gen_shifti(DisasContext *ctx, arg_shift *a, + void(*func)(TCGv, TCGv, TCGv)) +{ + if (a->shamt >= TARGET_LONG_BITS) { + return false; + } + + TCGv source1 = tcg_temp_new(); + TCGv source2 = tcg_temp_new(); + + gen_get_gpr(source1, a->rs1); + + tcg_gen_movi_tl(source2, a->shamt); + (*func)(source1, source1, source2); + + gen_set_gpr(a->rd, source1); + tcg_temp_free(source1); + tcg_temp_free(source2); + return true; +} + +static bool gen_shiftiw(DisasContext *ctx, arg_shift *a, + void(*func)(TCGv, TCGv, TCGv)) +{ + TCGv source1 = tcg_temp_new(); + TCGv source2 = tcg_temp_new(); + + gen_get_gpr(source1, a->rs1); + tcg_gen_movi_tl(source2, a->shamt); + + (*func)(source1, source1, source2); + tcg_gen_ext32s_tl(source1, source1); + + gen_set_gpr(a->rd, source1); + tcg_temp_free(source1); + tcg_temp_free(source2); + return true; +} + static void gen_ctz(TCGv ret, TCGv arg1) { tcg_gen_ctzi_tl(ret, arg1, TARGET_LONG_BITS); diff --git a/target/riscv/insn_trans/trans_rvi.c.inc b/target/riscv/insn_trans/trans_rvi.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_rvi.c.inc +++ b/target/riscv/insn_trans/trans_rvi.c.inc @@ -XXX,XX +XXX,XX @@ static bool trans_andi(DisasContext *ctx, arg_andi *a) } static bool trans_slli(DisasContext *ctx, arg_slli *a) { - if (a->shamt >= TARGET_LONG_BITS) { - return false; - } - - if (a->rd != 0) { - TCGv t = tcg_temp_new(); - gen_get_gpr(t, a->rs1); - - tcg_gen_shli_tl(t, t, a->shamt); - - gen_set_gpr(a->rd, t); - tcg_temp_free(t); - } /* NOP otherwise */ - return true; + return gen_shifti(ctx, a, tcg_gen_shl_tl); } static bool trans_srli(DisasContext *ctx, arg_srli *a) { - if (a->shamt >= TARGET_LONG_BITS) { - return false; - } - - if (a->rd != 0) { - TCGv t = tcg_temp_new(); - gen_get_gpr(t, a->rs1); - - tcg_gen_shri_tl(t, t, a->shamt); - gen_set_gpr(a->rd, t); - tcg_temp_free(t); - } /* NOP otherwise */ - return true; + return gen_shifti(ctx, a, tcg_gen_shr_tl); } static bool trans_srai(DisasContext *ctx, arg_srai *a) { - if (a->shamt >= TARGET_LONG_BITS) { - return false; - } - - if (a->rd != 0) { - TCGv t = tcg_temp_new(); - gen_get_gpr(t, a->rs1); - - tcg_gen_sari_tl(t, t, a->shamt); - gen_set_gpr(a->rd, t); - tcg_temp_free(t); - } /* NOP otherwise */ - return true; + return gen_shifti(ctx, a, tcg_gen_sar_tl); } static bool trans_add(DisasContext *ctx, arg_add *a) @@ -XXX,XX +XXX,XX @@ static bool trans_addiw(DisasContext *ctx, arg_addiw *a) static bool trans_slliw(DisasContext *ctx, arg_slliw *a) { REQUIRE_64BIT(ctx); - TCGv source1; - source1 = tcg_temp_new(); - gen_get_gpr(source1, a->rs1); - - tcg_gen_shli_tl(source1, source1, a->shamt); - tcg_gen_ext32s_tl(source1, source1); - gen_set_gpr(a->rd, source1); - - tcg_temp_free(source1); - return true; + return gen_shiftiw(ctx, a, tcg_gen_shl_tl); } static bool trans_srliw(DisasContext *ctx, arg_srliw *a) -- 2.31.1 From: Frank Chang <frank.chang@sifive.com> Signed-off-by: Kito Cheng <kito.cheng@sifive.com> Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210505160620.15723-10-frank.chang@sifive.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/insn32.decode | 17 +++++ target/riscv/translate.c | 61 ++++++++++++++++ target/riscv/insn_trans/trans_rvb.c.inc | 97 +++++++++++++++++++++++++ 3 files changed, 175 insertions(+) diff --git a/target/riscv/insn32.decode b/target/riscv/insn32.decode index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn32.decode +++ b/target/riscv/insn32.decode @@ -XXX,XX +XXX,XX @@ min 0000101 .......... 100 ..... 0110011 @r minu 0000101 .......... 101 ..... 0110011 @r max 0000101 .......... 110 ..... 0110011 @r maxu 0000101 .......... 111 ..... 0110011 @r +bset 0010100 .......... 001 ..... 0110011 @r +bclr 0100100 .......... 001 ..... 0110011 @r +binv 0110100 .......... 001 ..... 0110011 @r +bext 0100100 .......... 101 ..... 0110011 @r + +bseti 00101. ........... 001 ..... 0010011 @sh +bclri 01001. ........... 001 ..... 0010011 @sh +binvi 01101. ........... 001 ..... 0010011 @sh +bexti 01001. ........... 101 ..... 0010011 @sh # *** RV64B Standard Extension (in addition to RV32B) *** clzw 0110000 00000 ..... 001 ..... 0011011 @r2 @@ -XXX,XX +XXX,XX @@ cpopw 0110000 00010 ..... 001 ..... 0011011 @r2 packw 0000100 .......... 100 ..... 0111011 @r packuw 0100100 .......... 100 ..... 0111011 @r +bsetw 0010100 .......... 001 ..... 0111011 @r +bclrw 0100100 .......... 001 ..... 0111011 @r +binvw 0110100 .......... 001 ..... 0111011 @r +bextw 0100100 .......... 101 ..... 0111011 @r + +bsetiw 0010100 .......... 001 ..... 0011011 @sh5 +bclriw 0100100 .......... 001 ..... 0011011 @sh5 +binviw 0110100 .......... 001 ..... 0011011 @sh5 diff --git a/target/riscv/translate.c b/target/riscv/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/translate.c +++ b/target/riscv/translate.c @@ -XXX,XX +XXX,XX @@ static void gen_packh(TCGv ret, TCGv arg1, TCGv arg2) tcg_temp_free(t); } +static void gen_sbop_mask(TCGv ret, TCGv shamt) +{ + tcg_gen_movi_tl(ret, 1); + tcg_gen_shl_tl(ret, ret, shamt); +} + +static void gen_bset(TCGv ret, TCGv arg1, TCGv shamt) +{ + TCGv t = tcg_temp_new(); + + gen_sbop_mask(t, shamt); + tcg_gen_or_tl(ret, arg1, t); + + tcg_temp_free(t); +} + +static void gen_bclr(TCGv ret, TCGv arg1, TCGv shamt) +{ + TCGv t = tcg_temp_new(); + + gen_sbop_mask(t, shamt); + tcg_gen_andc_tl(ret, arg1, t); + + tcg_temp_free(t); +} + +static void gen_binv(TCGv ret, TCGv arg1, TCGv shamt) +{ + TCGv t = tcg_temp_new(); + + gen_sbop_mask(t, shamt); + tcg_gen_xor_tl(ret, arg1, t); + + tcg_temp_free(t); +} + +static void gen_bext(TCGv ret, TCGv arg1, TCGv shamt) +{ + tcg_gen_shr_tl(ret, arg1, shamt); + tcg_gen_andi_tl(ret, ret, 1); +} + static void gen_ctzw(TCGv ret, TCGv arg1) { tcg_gen_ori_tl(ret, arg1, (target_ulong)MAKE_64BIT_MASK(32, 32)); @@ -XXX,XX +XXX,XX @@ static bool gen_shifti(DisasContext *ctx, arg_shift *a, return true; } +static bool gen_shiftw(DisasContext *ctx, arg_r *a, + void(*func)(TCGv, TCGv, TCGv)) +{ + TCGv source1 = tcg_temp_new(); + TCGv source2 = tcg_temp_new(); + + gen_get_gpr(source1, a->rs1); + gen_get_gpr(source2, a->rs2); + + tcg_gen_andi_tl(source2, source2, 31); + (*func)(source1, source1, source2); + tcg_gen_ext32s_tl(source1, source1); + + gen_set_gpr(a->rd, source1); + tcg_temp_free(source1); + tcg_temp_free(source2); + return true; +} + static bool gen_shiftiw(DisasContext *ctx, arg_shift *a, void(*func)(TCGv, TCGv, TCGv)) { diff --git a/target/riscv/insn_trans/trans_rvb.c.inc b/target/riscv/insn_trans/trans_rvb.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_rvb.c.inc +++ b/target/riscv/insn_trans/trans_rvb.c.inc @@ -XXX,XX +XXX,XX @@ static bool trans_sext_h(DisasContext *ctx, arg_sext_h *a) return gen_unary(ctx, a, tcg_gen_ext16s_tl); } +static bool trans_bset(DisasContext *ctx, arg_bset *a) +{ + REQUIRE_EXT(ctx, RVB); + return gen_shift(ctx, a, gen_bset); +} + +static bool trans_bseti(DisasContext *ctx, arg_bseti *a) +{ + REQUIRE_EXT(ctx, RVB); + return gen_shifti(ctx, a, gen_bset); +} + +static bool trans_bclr(DisasContext *ctx, arg_bclr *a) +{ + REQUIRE_EXT(ctx, RVB); + return gen_shift(ctx, a, gen_bclr); +} + +static bool trans_bclri(DisasContext *ctx, arg_bclri *a) +{ + REQUIRE_EXT(ctx, RVB); + return gen_shifti(ctx, a, gen_bclr); +} + +static bool trans_binv(DisasContext *ctx, arg_binv *a) +{ + REQUIRE_EXT(ctx, RVB); + return gen_shift(ctx, a, gen_binv); +} + +static bool trans_binvi(DisasContext *ctx, arg_binvi *a) +{ + REQUIRE_EXT(ctx, RVB); + return gen_shifti(ctx, a, gen_binv); +} + +static bool trans_bext(DisasContext *ctx, arg_bext *a) +{ + REQUIRE_EXT(ctx, RVB); + return gen_shift(ctx, a, gen_bext); +} + +static bool trans_bexti(DisasContext *ctx, arg_bexti *a) +{ + REQUIRE_EXT(ctx, RVB); + return gen_shifti(ctx, a, gen_bext); +} + static bool trans_clzw(DisasContext *ctx, arg_clzw *a) { REQUIRE_64BIT(ctx); @@ -XXX,XX +XXX,XX @@ static bool trans_packuw(DisasContext *ctx, arg_packuw *a) REQUIRE_EXT(ctx, RVB); return gen_arith(ctx, a, gen_packuw); } + +static bool trans_bsetw(DisasContext *ctx, arg_bsetw *a) +{ + REQUIRE_64BIT(ctx); + REQUIRE_EXT(ctx, RVB); + return gen_shiftw(ctx, a, gen_bset); +} + +static bool trans_bsetiw(DisasContext *ctx, arg_bsetiw *a) +{ + REQUIRE_64BIT(ctx); + REQUIRE_EXT(ctx, RVB); + return gen_shiftiw(ctx, a, gen_bset); +} + +static bool trans_bclrw(DisasContext *ctx, arg_bclrw *a) +{ + REQUIRE_64BIT(ctx); + REQUIRE_EXT(ctx, RVB); + return gen_shiftw(ctx, a, gen_bclr); +} + +static bool trans_bclriw(DisasContext *ctx, arg_bclriw *a) +{ + REQUIRE_64BIT(ctx); + REQUIRE_EXT(ctx, RVB); + return gen_shiftiw(ctx, a, gen_bclr); +} + +static bool trans_binvw(DisasContext *ctx, arg_binvw *a) +{ + REQUIRE_64BIT(ctx); + REQUIRE_EXT(ctx, RVB); + return gen_shiftw(ctx, a, gen_binv); +} + +static bool trans_binviw(DisasContext *ctx, arg_binviw *a) +{ + REQUIRE_64BIT(ctx); + REQUIRE_EXT(ctx, RVB); + return gen_shiftiw(ctx, a, gen_binv); +} + +static bool trans_bextw(DisasContext *ctx, arg_bextw *a) +{ + REQUIRE_64BIT(ctx); + REQUIRE_EXT(ctx, RVB); + return gen_shiftw(ctx, a, gen_bext); +} -- 2.31.1 From: Kito Cheng <kito.cheng@sifive.com> Signed-off-by: Kito Cheng <kito.cheng@sifive.com> Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210505160620.15723-11-frank.chang@sifive.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/insn32.decode | 8 ++++ target/riscv/translate.c | 14 +++++++ target/riscv/insn_trans/trans_rvb.c.inc | 52 +++++++++++++++++++++++++ 3 files changed, 74 insertions(+) diff --git a/target/riscv/insn32.decode b/target/riscv/insn32.decode index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn32.decode +++ b/target/riscv/insn32.decode @@ -XXX,XX +XXX,XX @@ bset 0010100 .......... 001 ..... 0110011 @r bclr 0100100 .......... 001 ..... 0110011 @r binv 0110100 .......... 001 ..... 0110011 @r bext 0100100 .......... 101 ..... 0110011 @r +slo 0010000 .......... 001 ..... 0110011 @r +sro 0010000 .......... 101 ..... 0110011 @r bseti 00101. ........... 001 ..... 0010011 @sh bclri 01001. ........... 001 ..... 0010011 @sh binvi 01101. ........... 001 ..... 0010011 @sh bexti 01001. ........... 101 ..... 0010011 @sh +sloi 00100. ........... 001 ..... 0010011 @sh +sroi 00100. ........... 101 ..... 0010011 @sh # *** RV64B Standard Extension (in addition to RV32B) *** clzw 0110000 00000 ..... 001 ..... 0011011 @r2 @@ -XXX,XX +XXX,XX @@ bsetw 0010100 .......... 001 ..... 0111011 @r bclrw 0100100 .......... 001 ..... 0111011 @r binvw 0110100 .......... 001 ..... 0111011 @r bextw 0100100 .......... 101 ..... 0111011 @r +slow 0010000 .......... 001 ..... 0111011 @r +srow 0010000 .......... 101 ..... 0111011 @r bsetiw 0010100 .......... 001 ..... 0011011 @sh5 bclriw 0100100 .......... 001 ..... 0011011 @sh5 binviw 0110100 .......... 001 ..... 0011011 @sh5 +sloiw 0010000 .......... 001 ..... 0011011 @sh5 +sroiw 0010000 .......... 101 ..... 0011011 @sh5 diff --git a/target/riscv/translate.c b/target/riscv/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/translate.c +++ b/target/riscv/translate.c @@ -XXX,XX +XXX,XX @@ static void gen_bext(TCGv ret, TCGv arg1, TCGv shamt) tcg_gen_andi_tl(ret, ret, 1); } +static void gen_slo(TCGv ret, TCGv arg1, TCGv arg2) +{ + tcg_gen_not_tl(ret, arg1); + tcg_gen_shl_tl(ret, ret, arg2); + tcg_gen_not_tl(ret, ret); +} + +static void gen_sro(TCGv ret, TCGv arg1, TCGv arg2) +{ + tcg_gen_not_tl(ret, arg1); + tcg_gen_shr_tl(ret, ret, arg2); + tcg_gen_not_tl(ret, ret); +} + static void gen_ctzw(TCGv ret, TCGv arg1) { tcg_gen_ori_tl(ret, arg1, (target_ulong)MAKE_64BIT_MASK(32, 32)); diff --git a/target/riscv/insn_trans/trans_rvb.c.inc b/target/riscv/insn_trans/trans_rvb.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_rvb.c.inc +++ b/target/riscv/insn_trans/trans_rvb.c.inc @@ -XXX,XX +XXX,XX @@ static bool trans_bexti(DisasContext *ctx, arg_bexti *a) return gen_shifti(ctx, a, gen_bext); } +static bool trans_slo(DisasContext *ctx, arg_slo *a) +{ + REQUIRE_EXT(ctx, RVB); + return gen_shift(ctx, a, gen_slo); +} + +static bool trans_sloi(DisasContext *ctx, arg_sloi *a) +{ + REQUIRE_EXT(ctx, RVB); + return gen_shifti(ctx, a, gen_slo); +} + +static bool trans_sro(DisasContext *ctx, arg_sro *a) +{ + REQUIRE_EXT(ctx, RVB); + return gen_shift(ctx, a, gen_sro); +} + +static bool trans_sroi(DisasContext *ctx, arg_sroi *a) +{ + REQUIRE_EXT(ctx, RVB); + return gen_shifti(ctx, a, gen_sro); +} + static bool trans_clzw(DisasContext *ctx, arg_clzw *a) { REQUIRE_64BIT(ctx); @@ -XXX,XX +XXX,XX @@ static bool trans_bextw(DisasContext *ctx, arg_bextw *a) REQUIRE_EXT(ctx, RVB); return gen_shiftw(ctx, a, gen_bext); } + +static bool trans_slow(DisasContext *ctx, arg_slow *a) +{ + REQUIRE_64BIT(ctx); + REQUIRE_EXT(ctx, RVB); + return gen_shiftw(ctx, a, gen_slo); +} + +static bool trans_sloiw(DisasContext *ctx, arg_sloiw *a) +{ + REQUIRE_64BIT(ctx); + REQUIRE_EXT(ctx, RVB); + return gen_shiftiw(ctx, a, gen_slo); +} + +static bool trans_srow(DisasContext *ctx, arg_srow *a) +{ + REQUIRE_64BIT(ctx); + REQUIRE_EXT(ctx, RVB); + return gen_shiftw(ctx, a, gen_sro); +} + +static bool trans_sroiw(DisasContext *ctx, arg_sroiw *a) +{ + REQUIRE_64BIT(ctx); + REQUIRE_EXT(ctx, RVB); + return gen_shiftiw(ctx, a, gen_sro); +} -- 2.31.1 From: Kito Cheng <kito.cheng@sifive.com> Signed-off-by: Kito Cheng <kito.cheng@sifive.com> Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210505160620.15723-12-frank.chang@sifive.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/insn32.decode | 6 ++++ target/riscv/translate.c | 36 +++++++++++++++++++++++ target/riscv/insn_trans/trans_rvb.c.inc | 39 +++++++++++++++++++++++++ 3 files changed, 81 insertions(+) diff --git a/target/riscv/insn32.decode b/target/riscv/insn32.decode index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn32.decode +++ b/target/riscv/insn32.decode @@ -XXX,XX +XXX,XX @@ binv 0110100 .......... 001 ..... 0110011 @r bext 0100100 .......... 101 ..... 0110011 @r slo 0010000 .......... 001 ..... 0110011 @r sro 0010000 .......... 101 ..... 0110011 @r +ror 0110000 .......... 101 ..... 0110011 @r +rol 0110000 .......... 001 ..... 0110011 @r bseti 00101. ........... 001 ..... 0010011 @sh bclri 01001. ........... 001 ..... 0010011 @sh @@ -XXX,XX +XXX,XX @@ binvi 01101. ........... 001 ..... 0010011 @sh bexti 01001. ........... 101 ..... 0010011 @sh sloi 00100. ........... 001 ..... 0010011 @sh sroi 00100. ........... 101 ..... 0010011 @sh +rori 01100. ........... 101 ..... 0010011 @sh # *** RV64B Standard Extension (in addition to RV32B) *** clzw 0110000 00000 ..... 001 ..... 0011011 @r2 @@ -XXX,XX +XXX,XX @@ binvw 0110100 .......... 001 ..... 0111011 @r bextw 0100100 .......... 101 ..... 0111011 @r slow 0010000 .......... 001 ..... 0111011 @r srow 0010000 .......... 101 ..... 0111011 @r +rorw 0110000 .......... 101 ..... 0111011 @r +rolw 0110000 .......... 001 ..... 0111011 @r bsetiw 0010100 .......... 001 ..... 0011011 @sh5 bclriw 0100100 .......... 001 ..... 0011011 @sh5 binviw 0110100 .......... 001 ..... 0011011 @sh5 sloiw 0010000 .......... 001 ..... 0011011 @sh5 sroiw 0010000 .......... 101 ..... 0011011 @sh5 +roriw 0110000 .......... 101 ..... 0011011 @sh5 diff --git a/target/riscv/translate.c b/target/riscv/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/translate.c +++ b/target/riscv/translate.c @@ -XXX,XX +XXX,XX @@ static void gen_packuw(TCGv ret, TCGv arg1, TCGv arg2) tcg_temp_free(t); } +static void gen_rorw(TCGv ret, TCGv arg1, TCGv arg2) +{ + TCGv_i32 t1 = tcg_temp_new_i32(); + TCGv_i32 t2 = tcg_temp_new_i32(); + + /* truncate to 32-bits */ + tcg_gen_trunc_tl_i32(t1, arg1); + tcg_gen_trunc_tl_i32(t2, arg2); + + tcg_gen_rotr_i32(t1, t1, t2); + + /* sign-extend 64-bits */ + tcg_gen_ext_i32_tl(ret, t1); + + tcg_temp_free_i32(t1); + tcg_temp_free_i32(t2); +} + +static void gen_rolw(TCGv ret, TCGv arg1, TCGv arg2) +{ + TCGv_i32 t1 = tcg_temp_new_i32(); + TCGv_i32 t2 = tcg_temp_new_i32(); + + /* truncate to 32-bits */ + tcg_gen_trunc_tl_i32(t1, arg1); + tcg_gen_trunc_tl_i32(t2, arg2); + + tcg_gen_rotl_i32(t1, t1, t2); + + /* sign-extend 64-bits */ + tcg_gen_ext_i32_tl(ret, t1); + + tcg_temp_free_i32(t1); + tcg_temp_free_i32(t2); +} + static bool gen_arith(DisasContext *ctx, arg_r *a, void(*func)(TCGv, TCGv, TCGv)) { diff --git a/target/riscv/insn_trans/trans_rvb.c.inc b/target/riscv/insn_trans/trans_rvb.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_rvb.c.inc +++ b/target/riscv/insn_trans/trans_rvb.c.inc @@ -XXX,XX +XXX,XX @@ static bool trans_sroi(DisasContext *ctx, arg_sroi *a) return gen_shifti(ctx, a, gen_sro); } +static bool trans_ror(DisasContext *ctx, arg_ror *a) +{ + REQUIRE_EXT(ctx, RVB); + return gen_shift(ctx, a, tcg_gen_rotr_tl); +} + +static bool trans_rori(DisasContext *ctx, arg_rori *a) +{ + REQUIRE_EXT(ctx, RVB); + return gen_shifti(ctx, a, tcg_gen_rotr_tl); +} + +static bool trans_rol(DisasContext *ctx, arg_rol *a) +{ + REQUIRE_EXT(ctx, RVB); + return gen_shift(ctx, a, tcg_gen_rotl_tl); +} + static bool trans_clzw(DisasContext *ctx, arg_clzw *a) { REQUIRE_64BIT(ctx); @@ -XXX,XX +XXX,XX @@ static bool trans_sroiw(DisasContext *ctx, arg_sroiw *a) REQUIRE_EXT(ctx, RVB); return gen_shiftiw(ctx, a, gen_sro); } + +static bool trans_rorw(DisasContext *ctx, arg_rorw *a) +{ + REQUIRE_64BIT(ctx); + REQUIRE_EXT(ctx, RVB); + return gen_shiftw(ctx, a, gen_rorw); +} + +static bool trans_roriw(DisasContext *ctx, arg_roriw *a) +{ + REQUIRE_64BIT(ctx); + REQUIRE_EXT(ctx, RVB); + return gen_shiftiw(ctx, a, gen_rorw); +} + +static bool trans_rolw(DisasContext *ctx, arg_rolw *a) +{ + REQUIRE_64BIT(ctx); + REQUIRE_EXT(ctx, RVB); + return gen_shiftw(ctx, a, gen_rolw); +} -- 2.31.1 From: Frank Chang <frank.chang@sifive.com> Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210505160620.15723-13-frank.chang@sifive.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/helper.h | 4 ++ target/riscv/insn32.decode | 4 ++ target/riscv/bitmanip_helper.c | 64 +++++++++++++++++++++++++ target/riscv/translate.c | 28 +++++++++++ target/riscv/insn_trans/trans_rvb.c.inc | 31 ++++++++++++ target/riscv/meson.build | 1 + 6 files changed, 132 insertions(+) create mode 100644 target/riscv/bitmanip_helper.c diff --git a/target/riscv/helper.h b/target/riscv/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/helper.h +++ b/target/riscv/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_2(fcvt_d_l, TCG_CALL_NO_RWG, i64, env, tl) DEF_HELPER_FLAGS_2(fcvt_d_lu, TCG_CALL_NO_RWG, i64, env, tl) DEF_HELPER_FLAGS_1(fclass_d, TCG_CALL_NO_RWG_SE, tl, i64) +/* Bitmanip */ +DEF_HELPER_FLAGS_2(grev, TCG_CALL_NO_RWG_SE, tl, tl, tl) +DEF_HELPER_FLAGS_2(grevw, TCG_CALL_NO_RWG_SE, tl, tl, tl) + /* Special functions */ DEF_HELPER_3(csrrw, tl, env, tl, tl) DEF_HELPER_4(csrrs, tl, env, tl, tl, tl) diff --git a/target/riscv/insn32.decode b/target/riscv/insn32.decode index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn32.decode +++ b/target/riscv/insn32.decode @@ -XXX,XX +XXX,XX @@ slo 0010000 .......... 001 ..... 0110011 @r sro 0010000 .......... 101 ..... 0110011 @r ror 0110000 .......... 101 ..... 0110011 @r rol 0110000 .......... 001 ..... 0110011 @r +grev 0110100 .......... 101 ..... 0110011 @r bseti 00101. ........... 001 ..... 0010011 @sh bclri 01001. ........... 001 ..... 0010011 @sh @@ -XXX,XX +XXX,XX @@ bexti 01001. ........... 101 ..... 0010011 @sh sloi 00100. ........... 001 ..... 0010011 @sh sroi 00100. ........... 101 ..... 0010011 @sh rori 01100. ........... 101 ..... 0010011 @sh +grevi 01101. ........... 101 ..... 0010011 @sh # *** RV64B Standard Extension (in addition to RV32B) *** clzw 0110000 00000 ..... 001 ..... 0011011 @r2 @@ -XXX,XX +XXX,XX @@ slow 0010000 .......... 001 ..... 0111011 @r srow 0010000 .......... 101 ..... 0111011 @r rorw 0110000 .......... 101 ..... 0111011 @r rolw 0110000 .......... 001 ..... 0111011 @r +grevw 0110100 .......... 101 ..... 0111011 @r bsetiw 0010100 .......... 001 ..... 0011011 @sh5 bclriw 0100100 .......... 001 ..... 0011011 @sh5 @@ -XXX,XX +XXX,XX @@ binviw 0110100 .......... 001 ..... 0011011 @sh5 sloiw 0010000 .......... 001 ..... 0011011 @sh5 sroiw 0010000 .......... 101 ..... 0011011 @sh5 roriw 0110000 .......... 101 ..... 0011011 @sh5 +greviw 0110100 .......... 101 ..... 0011011 @sh5 diff --git a/target/riscv/bitmanip_helper.c b/target/riscv/bitmanip_helper.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/target/riscv/bitmanip_helper.c @@ -XXX,XX +XXX,XX @@ +/* + * RISC-V Bitmanip Extension Helpers for QEMU. + * + * Copyright (c) 2020 Kito Cheng, kito.cheng@sifive.com + * Copyright (c) 2020 Frank Chang, frank.chang@sifive.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2 or later, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "qemu/host-utils.h" +#include "exec/exec-all.h" +#include "exec/helper-proto.h" +#include "tcg/tcg.h" + +static const uint64_t adjacent_masks[] = { + dup_const(MO_8, 0x55), + dup_const(MO_8, 0x33), + dup_const(MO_8, 0x0f), + dup_const(MO_16, 0xff), + dup_const(MO_32, 0xffff), + UINT32_MAX +}; + +static inline target_ulong do_swap(target_ulong x, uint64_t mask, int shift) +{ + return ((x & mask) << shift) | ((x & ~mask) >> shift); +} + +static target_ulong do_grev(target_ulong rs1, + target_ulong rs2, + int bits) +{ + target_ulong x = rs1; + int i, shift; + + for (i = 0, shift = 1; shift < bits; i++, shift <<= 1) { + if (rs2 & shift) { + x = do_swap(x, adjacent_masks[i], shift); + } + } + + return x; +} + +target_ulong HELPER(grev)(target_ulong rs1, target_ulong rs2) +{ + return do_grev(rs1, rs2, TARGET_LONG_BITS); +} + +target_ulong HELPER(grevw)(target_ulong rs1, target_ulong rs2) +{ + return do_grev(rs1, rs2, 32); +} diff --git a/target/riscv/translate.c b/target/riscv/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/translate.c +++ b/target/riscv/translate.c @@ -XXX,XX +XXX,XX @@ static void gen_sro(TCGv ret, TCGv arg1, TCGv arg2) tcg_gen_not_tl(ret, ret); } +static bool gen_grevi(DisasContext *ctx, arg_grevi *a) +{ + TCGv source1 = tcg_temp_new(); + TCGv source2; + + gen_get_gpr(source1, a->rs1); + + if (a->shamt == (TARGET_LONG_BITS - 8)) { + /* rev8, byte swaps */ + tcg_gen_bswap_tl(source1, source1); + } else { + source2 = tcg_temp_new(); + tcg_gen_movi_tl(source2, a->shamt); + gen_helper_grev(source1, source1, source2); + tcg_temp_free(source2); + } + + gen_set_gpr(a->rd, source1); + tcg_temp_free(source1); + return true; +} + static void gen_ctzw(TCGv ret, TCGv arg1) { tcg_gen_ori_tl(ret, arg1, (target_ulong)MAKE_64BIT_MASK(32, 32)); @@ -XXX,XX +XXX,XX @@ static void gen_rolw(TCGv ret, TCGv arg1, TCGv arg2) tcg_temp_free_i32(t2); } +static void gen_grevw(TCGv ret, TCGv arg1, TCGv arg2) +{ + tcg_gen_ext32u_tl(arg1, arg1); + gen_helper_grev(ret, arg1, arg2); +} + static bool gen_arith(DisasContext *ctx, arg_r *a, void(*func)(TCGv, TCGv, TCGv)) { diff --git a/target/riscv/insn_trans/trans_rvb.c.inc b/target/riscv/insn_trans/trans_rvb.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_rvb.c.inc +++ b/target/riscv/insn_trans/trans_rvb.c.inc @@ -XXX,XX +XXX,XX @@ static bool trans_rol(DisasContext *ctx, arg_rol *a) return gen_shift(ctx, a, tcg_gen_rotl_tl); } +static bool trans_grev(DisasContext *ctx, arg_grev *a) +{ + REQUIRE_EXT(ctx, RVB); + return gen_shift(ctx, a, gen_helper_grev); +} + +static bool trans_grevi(DisasContext *ctx, arg_grevi *a) +{ + REQUIRE_EXT(ctx, RVB); + + if (a->shamt >= TARGET_LONG_BITS) { + return false; + } + + return gen_grevi(ctx, a); +} + static bool trans_clzw(DisasContext *ctx, arg_clzw *a) { REQUIRE_64BIT(ctx); @@ -XXX,XX +XXX,XX @@ static bool trans_rolw(DisasContext *ctx, arg_rolw *a) REQUIRE_EXT(ctx, RVB); return gen_shiftw(ctx, a, gen_rolw); } + +static bool trans_grevw(DisasContext *ctx, arg_grevw *a) +{ + REQUIRE_64BIT(ctx); + REQUIRE_EXT(ctx, RVB); + return gen_shiftw(ctx, a, gen_grevw); +} + +static bool trans_greviw(DisasContext *ctx, arg_greviw *a) +{ + REQUIRE_64BIT(ctx); + REQUIRE_EXT(ctx, RVB); + return gen_shiftiw(ctx, a, gen_grevw); +} diff --git a/target/riscv/meson.build b/target/riscv/meson.build index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/meson.build +++ b/target/riscv/meson.build @@ -XXX,XX +XXX,XX @@ riscv_ss.add(files( 'gdbstub.c', 'op_helper.c', 'vector_helper.c', + 'bitmanip_helper.c', 'translate.c', )) -- 2.31.1 From: Frank Chang <frank.chang@sifive.com> Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210505160620.15723-14-frank.chang@sifive.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/helper.h | 2 ++ target/riscv/insn32.decode | 4 ++++ target/riscv/bitmanip_helper.c | 26 +++++++++++++++++++++++++ target/riscv/translate.c | 6 ++++++ target/riscv/insn_trans/trans_rvb.c.inc | 26 +++++++++++++++++++++++++ 5 files changed, 64 insertions(+) diff --git a/target/riscv/helper.h b/target/riscv/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/helper.h +++ b/target/riscv/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_1(fclass_d, TCG_CALL_NO_RWG_SE, tl, i64) /* Bitmanip */ DEF_HELPER_FLAGS_2(grev, TCG_CALL_NO_RWG_SE, tl, tl, tl) DEF_HELPER_FLAGS_2(grevw, TCG_CALL_NO_RWG_SE, tl, tl, tl) +DEF_HELPER_FLAGS_2(gorc, TCG_CALL_NO_RWG_SE, tl, tl, tl) +DEF_HELPER_FLAGS_2(gorcw, TCG_CALL_NO_RWG_SE, tl, tl, tl) /* Special functions */ DEF_HELPER_3(csrrw, tl, env, tl, tl) diff --git a/target/riscv/insn32.decode b/target/riscv/insn32.decode index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn32.decode +++ b/target/riscv/insn32.decode @@ -XXX,XX +XXX,XX @@ sro 0010000 .......... 101 ..... 0110011 @r ror 0110000 .......... 101 ..... 0110011 @r rol 0110000 .......... 001 ..... 0110011 @r grev 0110100 .......... 101 ..... 0110011 @r +gorc 0010100 .......... 101 ..... 0110011 @r bseti 00101. ........... 001 ..... 0010011 @sh bclri 01001. ........... 001 ..... 0010011 @sh @@ -XXX,XX +XXX,XX @@ sloi 00100. ........... 001 ..... 0010011 @sh sroi 00100. ........... 101 ..... 0010011 @sh rori 01100. ........... 101 ..... 0010011 @sh grevi 01101. ........... 101 ..... 0010011 @sh +gorci 00101. ........... 101 ..... 0010011 @sh # *** RV64B Standard Extension (in addition to RV32B) *** clzw 0110000 00000 ..... 001 ..... 0011011 @r2 @@ -XXX,XX +XXX,XX @@ srow 0010000 .......... 101 ..... 0111011 @r rorw 0110000 .......... 101 ..... 0111011 @r rolw 0110000 .......... 001 ..... 0111011 @r grevw 0110100 .......... 101 ..... 0111011 @r +gorcw 0010100 .......... 101 ..... 0111011 @r bsetiw 0010100 .......... 001 ..... 0011011 @sh5 bclriw 0100100 .......... 001 ..... 0011011 @sh5 @@ -XXX,XX +XXX,XX @@ sloiw 0010000 .......... 001 ..... 0011011 @sh5 sroiw 0010000 .......... 101 ..... 0011011 @sh5 roriw 0110000 .......... 101 ..... 0011011 @sh5 greviw 0110100 .......... 101 ..... 0011011 @sh5 +gorciw 0010100 .......... 101 ..... 0011011 @sh5 diff --git a/target/riscv/bitmanip_helper.c b/target/riscv/bitmanip_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/bitmanip_helper.c +++ b/target/riscv/bitmanip_helper.c @@ -XXX,XX +XXX,XX @@ target_ulong HELPER(grevw)(target_ulong rs1, target_ulong rs2) { return do_grev(rs1, rs2, 32); } + +static target_ulong do_gorc(target_ulong rs1, + target_ulong rs2, + int bits) +{ + target_ulong x = rs1; + int i, shift; + + for (i = 0, shift = 1; shift < bits; i++, shift <<= 1) { + if (rs2 & shift) { + x |= do_swap(x, adjacent_masks[i], shift); + } + } + + return x; +} + +target_ulong HELPER(gorc)(target_ulong rs1, target_ulong rs2) +{ + return do_gorc(rs1, rs2, TARGET_LONG_BITS); +} + +target_ulong HELPER(gorcw)(target_ulong rs1, target_ulong rs2) +{ + return do_gorc(rs1, rs2, 32); +} diff --git a/target/riscv/translate.c b/target/riscv/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/translate.c +++ b/target/riscv/translate.c @@ -XXX,XX +XXX,XX @@ static void gen_grevw(TCGv ret, TCGv arg1, TCGv arg2) gen_helper_grev(ret, arg1, arg2); } +static void gen_gorcw(TCGv ret, TCGv arg1, TCGv arg2) +{ + tcg_gen_ext32u_tl(arg1, arg1); + gen_helper_gorcw(ret, arg1, arg2); +} + static bool gen_arith(DisasContext *ctx, arg_r *a, void(*func)(TCGv, TCGv, TCGv)) { diff --git a/target/riscv/insn_trans/trans_rvb.c.inc b/target/riscv/insn_trans/trans_rvb.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_rvb.c.inc +++ b/target/riscv/insn_trans/trans_rvb.c.inc @@ -XXX,XX +XXX,XX @@ static bool trans_grevi(DisasContext *ctx, arg_grevi *a) return gen_grevi(ctx, a); } +static bool trans_gorc(DisasContext *ctx, arg_gorc *a) +{ + REQUIRE_EXT(ctx, RVB); + return gen_shift(ctx, a, gen_helper_gorc); +} + +static bool trans_gorci(DisasContext *ctx, arg_gorci *a) +{ + REQUIRE_EXT(ctx, RVB); + return gen_shifti(ctx, a, gen_helper_gorc); +} + static bool trans_clzw(DisasContext *ctx, arg_clzw *a) { REQUIRE_64BIT(ctx); @@ -XXX,XX +XXX,XX @@ static bool trans_greviw(DisasContext *ctx, arg_greviw *a) REQUIRE_EXT(ctx, RVB); return gen_shiftiw(ctx, a, gen_grevw); } + +static bool trans_gorcw(DisasContext *ctx, arg_gorcw *a) +{ + REQUIRE_64BIT(ctx); + REQUIRE_EXT(ctx, RVB); + return gen_shiftw(ctx, a, gen_gorcw); +} + +static bool trans_gorciw(DisasContext *ctx, arg_gorciw *a) +{ + REQUIRE_64BIT(ctx); + REQUIRE_EXT(ctx, RVB); + return gen_shiftiw(ctx, a, gen_gorcw); +} -- 2.31.1 From: Kito Cheng <kito.cheng@sifive.com> Signed-off-by: Kito Cheng <kito.cheng@sifive.com> Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210505160620.15723-15-frank.chang@sifive.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/insn32.decode | 6 +++++ target/riscv/translate.c | 32 +++++++++++++++++++++++++ target/riscv/insn_trans/trans_rvb.c.inc | 24 +++++++++++++++++++ 3 files changed, 62 insertions(+) diff --git a/target/riscv/insn32.decode b/target/riscv/insn32.decode index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn32.decode +++ b/target/riscv/insn32.decode @@ -XXX,XX +XXX,XX @@ ror 0110000 .......... 101 ..... 0110011 @r rol 0110000 .......... 001 ..... 0110011 @r grev 0110100 .......... 101 ..... 0110011 @r gorc 0010100 .......... 101 ..... 0110011 @r +sh1add 0010000 .......... 010 ..... 0110011 @r +sh2add 0010000 .......... 100 ..... 0110011 @r +sh3add 0010000 .......... 110 ..... 0110011 @r bseti 00101. ........... 001 ..... 0010011 @sh bclri 01001. ........... 001 ..... 0010011 @sh @@ -XXX,XX +XXX,XX @@ rorw 0110000 .......... 101 ..... 0111011 @r rolw 0110000 .......... 001 ..... 0111011 @r grevw 0110100 .......... 101 ..... 0111011 @r gorcw 0010100 .......... 101 ..... 0111011 @r +sh1add_uw 0010000 .......... 010 ..... 0111011 @r +sh2add_uw 0010000 .......... 100 ..... 0111011 @r +sh3add_uw 0010000 .......... 110 ..... 0111011 @r bsetiw 0010100 .......... 001 ..... 0011011 @sh5 bclriw 0100100 .......... 001 ..... 0011011 @sh5 diff --git a/target/riscv/translate.c b/target/riscv/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/translate.c +++ b/target/riscv/translate.c @@ -XXX,XX +XXX,XX @@ static bool gen_grevi(DisasContext *ctx, arg_grevi *a) return true; } +#define GEN_SHADD(SHAMT) \ +static void gen_sh##SHAMT##add(TCGv ret, TCGv arg1, TCGv arg2) \ +{ \ + TCGv t = tcg_temp_new(); \ + \ + tcg_gen_shli_tl(t, arg1, SHAMT); \ + tcg_gen_add_tl(ret, t, arg2); \ + \ + tcg_temp_free(t); \ +} + +GEN_SHADD(1) +GEN_SHADD(2) +GEN_SHADD(3) + static void gen_ctzw(TCGv ret, TCGv arg1) { tcg_gen_ori_tl(ret, arg1, (target_ulong)MAKE_64BIT_MASK(32, 32)); @@ -XXX,XX +XXX,XX @@ static void gen_gorcw(TCGv ret, TCGv arg1, TCGv arg2) gen_helper_gorcw(ret, arg1, arg2); } +#define GEN_SHADD_UW(SHAMT) \ +static void gen_sh##SHAMT##add_uw(TCGv ret, TCGv arg1, TCGv arg2) \ +{ \ + TCGv t = tcg_temp_new(); \ + \ + tcg_gen_ext32u_tl(t, arg1); \ + \ + tcg_gen_shli_tl(t, t, SHAMT); \ + tcg_gen_add_tl(ret, t, arg2); \ + \ + tcg_temp_free(t); \ +} + +GEN_SHADD_UW(1) +GEN_SHADD_UW(2) +GEN_SHADD_UW(3) + static bool gen_arith(DisasContext *ctx, arg_r *a, void(*func)(TCGv, TCGv, TCGv)) { diff --git a/target/riscv/insn_trans/trans_rvb.c.inc b/target/riscv/insn_trans/trans_rvb.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_rvb.c.inc +++ b/target/riscv/insn_trans/trans_rvb.c.inc @@ -XXX,XX +XXX,XX @@ static bool trans_gorci(DisasContext *ctx, arg_gorci *a) return gen_shifti(ctx, a, gen_helper_gorc); } +#define GEN_TRANS_SHADD(SHAMT) \ +static bool trans_sh##SHAMT##add(DisasContext *ctx, arg_sh##SHAMT##add *a) \ +{ \ + REQUIRE_EXT(ctx, RVB); \ + return gen_arith(ctx, a, gen_sh##SHAMT##add); \ +} + +GEN_TRANS_SHADD(1) +GEN_TRANS_SHADD(2) +GEN_TRANS_SHADD(3) + static bool trans_clzw(DisasContext *ctx, arg_clzw *a) { REQUIRE_64BIT(ctx); @@ -XXX,XX +XXX,XX @@ static bool trans_gorciw(DisasContext *ctx, arg_gorciw *a) REQUIRE_EXT(ctx, RVB); return gen_shiftiw(ctx, a, gen_gorcw); } + +#define GEN_TRANS_SHADD_UW(SHAMT) \ +static bool trans_sh##SHAMT##add_uw(DisasContext *ctx, \ + arg_sh##SHAMT##add_uw *a) \ +{ \ + REQUIRE_64BIT(ctx); \ + REQUIRE_EXT(ctx, RVB); \ + return gen_arith(ctx, a, gen_sh##SHAMT##add_uw); \ +} + +GEN_TRANS_SHADD_UW(1) +GEN_TRANS_SHADD_UW(2) +GEN_TRANS_SHADD_UW(3) -- 2.31.1 From: Kito Cheng <kito.cheng@sifive.com> Signed-off-by: Kito Cheng <kito.cheng@sifive.com> Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210505160620.15723-16-frank.chang@sifive.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/insn32.decode | 3 +++ target/riscv/translate.c | 6 ++++++ target/riscv/insn_trans/trans_rvb.c.inc | 26 +++++++++++++++++++++++++ 3 files changed, 35 insertions(+) diff --git a/target/riscv/insn32.decode b/target/riscv/insn32.decode index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn32.decode +++ b/target/riscv/insn32.decode @@ -XXX,XX +XXX,XX @@ gorcw 0010100 .......... 101 ..... 0111011 @r sh1add_uw 0010000 .......... 010 ..... 0111011 @r sh2add_uw 0010000 .......... 100 ..... 0111011 @r sh3add_uw 0010000 .......... 110 ..... 0111011 @r +add_uw 0000100 .......... 000 ..... 0111011 @r bsetiw 0010100 .......... 001 ..... 0011011 @sh5 bclriw 0100100 .......... 001 ..... 0011011 @sh5 @@ -XXX,XX +XXX,XX @@ sroiw 0010000 .......... 101 ..... 0011011 @sh5 roriw 0110000 .......... 101 ..... 0011011 @sh5 greviw 0110100 .......... 101 ..... 0011011 @sh5 gorciw 0010100 .......... 101 ..... 0011011 @sh5 + +slli_uw 00001. ........... 001 ..... 0011011 @sh diff --git a/target/riscv/translate.c b/target/riscv/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/translate.c +++ b/target/riscv/translate.c @@ -XXX,XX +XXX,XX @@ GEN_SHADD_UW(1) GEN_SHADD_UW(2) GEN_SHADD_UW(3) +static void gen_add_uw(TCGv ret, TCGv arg1, TCGv arg2) +{ + tcg_gen_ext32u_tl(arg1, arg1); + tcg_gen_add_tl(ret, arg1, arg2); +} + static bool gen_arith(DisasContext *ctx, arg_r *a, void(*func)(TCGv, TCGv, TCGv)) { diff --git a/target/riscv/insn_trans/trans_rvb.c.inc b/target/riscv/insn_trans/trans_rvb.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_rvb.c.inc +++ b/target/riscv/insn_trans/trans_rvb.c.inc @@ -XXX,XX +XXX,XX @@ static bool trans_sh##SHAMT##add_uw(DisasContext *ctx, \ GEN_TRANS_SHADD_UW(1) GEN_TRANS_SHADD_UW(2) GEN_TRANS_SHADD_UW(3) + +static bool trans_add_uw(DisasContext *ctx, arg_add_uw *a) +{ + REQUIRE_64BIT(ctx); + REQUIRE_EXT(ctx, RVB); + return gen_arith(ctx, a, gen_add_uw); +} + +static bool trans_slli_uw(DisasContext *ctx, arg_slli_uw *a) +{ + REQUIRE_64BIT(ctx); + REQUIRE_EXT(ctx, RVB); + + TCGv source1 = tcg_temp_new(); + gen_get_gpr(source1, a->rs1); + + if (a->shamt < 32) { + tcg_gen_deposit_z_tl(source1, source1, a->shamt, 32); + } else { + tcg_gen_shli_tl(source1, source1, a->shamt); + } + + gen_set_gpr(a->rd, source1); + tcg_temp_free(source1); + return true; +} -- 2.31.1 From: Kito Cheng <kito.cheng@sifive.com> B-extension is default off, use cpu rv32 or rv64 with x-b=true to enable B-extension. Signed-off-by: Kito Cheng <kito.cheng@sifive.com> Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210505160620.15723-17-frank.chang@sifive.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 1 + target/riscv/cpu.c | 4 ++++ 2 files changed, 5 insertions(+) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ struct RISCVCPU { bool ext_f; bool ext_d; bool ext_c; + bool ext_b; bool ext_s; bool ext_u; bool ext_h; diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_realize(DeviceState *dev, Error **errp) if (cpu->cfg.ext_h) { target_misa |= RVH; } + if (cpu->cfg.ext_b) { + target_misa |= RVB; + } if (cpu->cfg.ext_v) { target_misa |= RVV; if (!is_power_of_2(cpu->cfg.vlen)) { @@ -XXX,XX +XXX,XX @@ static Property riscv_cpu_properties[] = { DEFINE_PROP_BOOL("s", RISCVCPU, cfg.ext_s, true), DEFINE_PROP_BOOL("u", RISCVCPU, cfg.ext_u, true), /* This is experimental so mark with 'x-' */ + DEFINE_PROP_BOOL("x-b", RISCVCPU, cfg.ext_b, false), DEFINE_PROP_BOOL("x-h", RISCVCPU, cfg.ext_h, false), DEFINE_PROP_BOOL("x-v", RISCVCPU, cfg.ext_v, false), DEFINE_PROP_BOOL("Counters", RISCVCPU, cfg.ext_counters, true), -- 2.31.1 From: Frank Chang <frank.chang@sifive.com> Default b-ext version is v0.93. Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210505160620.15723-18-frank.chang@sifive.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 3 +++ target/riscv/cpu.c | 23 +++++++++++++++++++++++ 2 files changed, 26 insertions(+) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ enum { #define PRIV_VERSION_1_10_0 0x00011000 #define PRIV_VERSION_1_11_0 0x00011100 +#define BEXT_VERSION_0_93_0 0x00009300 #define VEXT_VERSION_0_07_1 0x00000701 enum { @@ -XXX,XX +XXX,XX @@ struct CPURISCVState { target_ulong guest_phys_fault_addr; target_ulong priv_ver; + target_ulong bext_ver; target_ulong vext_ver; target_ulong misa; target_ulong misa_mask; @@ -XXX,XX +XXX,XX @@ struct RISCVCPU { char *priv_spec; char *user_spec; + char *bext_spec; char *vext_spec; uint16_t vlen; uint16_t elen; diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static void set_priv_version(CPURISCVState *env, int priv_ver) env->priv_ver = priv_ver; } +static void set_bext_version(CPURISCVState *env, int bext_ver) +{ + env->bext_ver = bext_ver; +} + static void set_vext_version(CPURISCVState *env, int vext_ver) { env->vext_ver = vext_ver; @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_realize(DeviceState *dev, Error **errp) CPURISCVState *env = &cpu->env; RISCVCPUClass *mcc = RISCV_CPU_GET_CLASS(dev); int priv_version = PRIV_VERSION_1_11_0; + int bext_version = BEXT_VERSION_0_93_0; int vext_version = VEXT_VERSION_0_07_1; target_ulong target_misa = env->misa; Error *local_err = NULL; @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_realize(DeviceState *dev, Error **errp) } set_priv_version(env, priv_version); + set_bext_version(env, bext_version); set_vext_version(env, vext_version); if (cpu->cfg.mmu) { @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_realize(DeviceState *dev, Error **errp) } if (cpu->cfg.ext_b) { target_misa |= RVB; + + if (cpu->cfg.bext_spec) { + if (!g_strcmp0(cpu->cfg.bext_spec, "v0.93")) { + bext_version = BEXT_VERSION_0_93_0; + } else { + error_setg(errp, + "Unsupported bitmanip spec version '%s'", + cpu->cfg.bext_spec); + return; + } + } else { + qemu_log("bitmanip version is not specified, " + "use the default value v0.93\n"); + } + set_bext_version(env, bext_version); } if (cpu->cfg.ext_v) { target_misa |= RVV; @@ -XXX,XX +XXX,XX @@ static Property riscv_cpu_properties[] = { DEFINE_PROP_BOOL("Zifencei", RISCVCPU, cfg.ext_ifencei, true), DEFINE_PROP_BOOL("Zicsr", RISCVCPU, cfg.ext_icsr, true), DEFINE_PROP_STRING("priv_spec", RISCVCPU, cfg.priv_spec), + DEFINE_PROP_STRING("bext_spec", RISCVCPU, cfg.bext_spec), DEFINE_PROP_STRING("vext_spec", RISCVCPU, cfg.vext_spec), DEFINE_PROP_UINT16("vlen", RISCVCPU, cfg.vlen, 128), DEFINE_PROP_UINT16("elen", RISCVCPU, cfg.elen, 64), -- 2.31.1 From: Alistair Francis <alistair.francis@wdc.com> The following changes since commit c77283dd5d79149f4e7e9edd00f65416c648ee59: Merge tag 'pull-request-2025-07-02' of https://gitlab.com/thuth/qemu into staging (2025-07-03 06:01:41 -0400) are available in the Git repository at: https://github.com/alistair23/qemu.git tags/pull-riscv-to-apply-20250704 for you to fetch changes up to dc8bffc4eb0a93d3266cea1b17f8848dea5b915c: target: riscv: Add Svrsw60t59b extension support (2025-07-04 21:09:49 +1000) ---------------------------------------------------------------- Second RISC-V PR for 10.1 * sstc extension fixes * Fix zama16b order in isa_edata_arr * Profile handling fixes * Extend PMP region up to 64 * Remove capital 'Z' CPU properties * Add missing named features * Support atomic instruction fetch (Ziccif) * Add max_satp_mode from host cpu * Extend and configure PMP region count * Fix PPN field of Translation-reponse register * Use qemu_chr_fe_write_all() in DBCN_CONSOLE_WRITE_BYTE * Fix fcvt.s.bf16 NaN box checking * Avoid infinite delay of async xmit function * Device tree reg cleanups * Add Kunminghu CPU and platform * Fix missing exit TB flow for ldff_trans * Fix migration failure when aia is configured as aplic-imsic * Fix MEPC/SEPC bit masking for IALIGN * Add a property to set vill bit on reserved usage of vsetvli instruction * Add Svrsw60t59b extension support ---------------------------------------------------------------- Alexandre Ghiti (1): target: riscv: Add Svrsw60t59b extension support Anton Blanchard (1): target/riscv: Fix fcvt.s.bf16 NaN box checking Charalampos Mitrodimas (2): target/riscv: Fix MEPC/SEPC bit masking for IALIGN tests/tcg/riscv64: Add test for MEPC bit masking Daniel Henrique Barboza (9): target/riscv/cpu.c: fix zama16b order in isa_edata_arr[] target/riscv/tcg: restrict satp_mode changes in cpu_set_profile target/riscv/tcg: decouple profile enablement from user prop target/riscv: add profile->present flag target/riscv: remove capital 'Z' CPU properties target/riscv/cpu.c: add 'sdtrig' in riscv,isa target/riscv/cpu.c: add 'ssstrict' to riscv, isa target/riscv/cpu.c: do better with 'named features' doc target/riscv: use qemu_chr_fe_write_all() in DBCN_CONSOLE_WRITE_BYTE Florian Lugou (1): hw/char: sifive_uart: Avoid infinite delay of async xmit function Huang Borong (2): target/riscv: Add BOSC's Xiangshan Kunminghu CPU hw/riscv: Initial support for BOSC's Xiangshan Kunminghu FPGA prototype Jay Chang (2): target/riscv: Extend PMP region up to 64 target/riscv: Make PMP region count configurable Jim Shu (5): target/riscv: Add the checking into stimecmp write function. hw/intc: riscv_aclint: Fix mtime write for sstc extension target/riscv: Fix VSTIP bit in sstc extension. target/riscv: Enable/Disable S/VS-mode Timer when STCE bit is changed target/riscv: support atomic instruction fetch (Ziccif) Joel Stanley (12): hw/riscv/virt: Fix clint base address type hw/riscv/virt: Use setprop_sized_cells for clint hw/riscv/virt: Use setprop_sized_cells for memory hw/riscv/virt: Use setprop_sized_cells for aplic hw/riscv/virt: Use setprop_sized_cells for aclint hw/riscv/virt: Use setprop_sized_cells for plic hw/riscv/virt: Use setprop_sized_cells for virtio hw/riscv/virt: Use setprop_sized_cells for reset hw/riscv/virt: Use setprop_sized_cells for uart hw/riscv/virt: Use setprop_sized_cells for rtc hw/riscv/virt: Use setprop_sized_cells for iommu hw/riscv/virt: Use setprop_sized_cells for pcie Max Chou (1): target/riscv: rvv: Fix missing exit TB flow for ldff_trans Meng Zhuo (1): target/riscv/kvm: add max_satp_mode from host cpu Nutty Liu (1): hw/riscv/riscv-iommu: Fix PPN field of Translation-reponse register Vasilis Liaskovitis (1): target/riscv: Add a property to set vill bit on reserved usage of vsetvli instruction liu.xuemei1@zte.com.cn (1): migration: Fix migration failure when aia is configured as aplic-imsic MAINTAINERS | 7 + docs/system/riscv/xiangshan-kunminghu.rst | 39 +++++ docs/system/target-riscv.rst | 1 + configs/devices/riscv64-softmmu/default.mak | 1 + hw/riscv/riscv-iommu-bits.h | 1 + include/hw/riscv/xiangshan_kmh.h | 68 +++++++++ target/riscv/cpu-qom.h | 1 + target/riscv/cpu.h | 19 ++- target/riscv/cpu_bits.h | 63 +++++++- target/riscv/helper.h | 2 +- target/riscv/internals.h | 27 ++++ target/riscv/time_helper.h | 1 + target/riscv/cpu_cfg_fields.h.inc | 3 + hw/char/sifive_uart.c | 6 +- hw/intc/riscv_aclint.c | 5 + hw/intc/riscv_aplic.c | 12 +- hw/intc/riscv_imsic.c | 10 +- hw/riscv/riscv-iommu.c | 9 +- hw/riscv/virt.c | 66 ++++----- hw/riscv/xiangshan_kmh.c | 220 ++++++++++++++++++++++++++++ target/riscv/cpu.c | 144 +++++++++++++++--- target/riscv/cpu_helper.c | 3 +- target/riscv/csr.c | 192 +++++++++++++++++++++++- target/riscv/fpu_helper.c | 2 +- target/riscv/kvm/kvm-cpu.c | 18 ++- target/riscv/machine.c | 3 +- target/riscv/op_helper.c | 4 +- target/riscv/pmp.c | 28 ++-- target/riscv/riscv-qmp-cmds.c | 2 +- target/riscv/tcg/tcg-cpu.c | 186 +++++++++++------------ target/riscv/time_helper.c | 65 +++++++- target/riscv/translate.c | 46 ++++-- target/riscv/vector_helper.c | 12 +- target/riscv/insn_trans/trans_rvv.c.inc | 10 +- hw/riscv/Kconfig | 9 ++ hw/riscv/meson.build | 1 + tests/data/acpi/riscv64/virt/RHCT | Bin 400 -> 416 bytes tests/tcg/riscv64/Makefile.softmmu-target | 4 + tests/tcg/riscv64/test-mepc-masking.S | 73 +++++++++ 39 files changed, 1151 insertions(+), 212 deletions(-) create mode 100644 docs/system/riscv/xiangshan-kunminghu.rst create mode 100644 include/hw/riscv/xiangshan_kmh.h create mode 100644 hw/riscv/xiangshan_kmh.c create mode 100644 tests/tcg/riscv64/test-mepc-masking.S From: Jim Shu <jim.shu@sifive.com> Preparation commit to let aclint timer to use stimecmp write function. Aclint timer doesn't call sstc() predicate so we need to check inside the stimecmp write function. Signed-off-by: Jim Shu <jim.shu@sifive.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250519143518.11086-2-jim.shu@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/time_helper.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) diff --git a/target/riscv/time_helper.c b/target/riscv/time_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/time_helper.c +++ b/target/riscv/time_helper.c @@ -XXX,XX +XXX,XX @@ void riscv_timer_write_timecmp(CPURISCVState *env, QEMUTimer *timer, { uint64_t diff, ns_diff, next; RISCVAclintMTimerState *mtimer = env->rdtime_fn_arg; - uint32_t timebase_freq = mtimer->timebase_freq; - uint64_t rtc_r = env->rdtime_fn(env->rdtime_fn_arg) + delta; + uint32_t timebase_freq; + uint64_t rtc_r; + + if (!riscv_cpu_cfg(env)->ext_sstc || !env->rdtime_fn || + !env->rdtime_fn_arg || !get_field(env->menvcfg, MENVCFG_STCE)) { + /* S/VS Timer IRQ depends on sstc extension, rdtime_fn(), and STCE. */ + return; + } + + if (timer_irq == MIP_VSTIP && + (!riscv_has_ext(env, RVH) || !get_field(env->henvcfg, HENVCFG_STCE))) { + /* VS Timer IRQ also depends on RVH and henvcfg.STCE. */ + return; + } + + timebase_freq = mtimer->timebase_freq; + rtc_r = env->rdtime_fn(env->rdtime_fn_arg) + delta; if (timecmp <= rtc_r) { /* -- 2.50.0 From: Jim Shu <jim.shu@sifive.com> When changing the mtime value, the period of [s|vs]timecmp timers should also be updated, similar to the period of mtimecmp timer. The period of the stimecmp timer is the time until the next S-mode timer IRQ. The value is calculated as "stimecmp - time". [1] It is equal to "stimecmp - mtime" since the time CSR is a read-only shadow of the memory-mapped mtime register. Thus, changing mtime value will update the period of stimecmp timer. Similarly, the period of vstimecmp timer is calculated as "vstimecmp - (mtime + htimedelta)" [2], so changing mtime value will update the period of vstimecmp timer. [1] RISC-V Priv spec ch 9.1.1. Supervisor Timer (stimecmp) Register A supervisor timer interrupt becomes pending, as reflected in the STIP bit in the mip and sip registers whenever time contains a value greater than or equal to stimecmp. [2] RISC-V Priv spec ch19.2.1. Virtual Supervisor Timer (vstimecmp) Register A virtual supervisor timer interrupt becomes pending, as reflected in the VSTIP bit in the hip register, whenever (time + htimedelta), truncated to 64 bits, contains a value greater than or equal to vstimecmp Signed-off-by: Jim Shu <jim.shu@sifive.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250519143518.11086-3-jim.shu@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/intc/riscv_aclint.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/hw/intc/riscv_aclint.c b/hw/intc/riscv_aclint.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/riscv_aclint.c +++ b/hw/intc/riscv_aclint.c @@ -XXX,XX +XXX,XX @@ #include "qemu/module.h" #include "hw/sysbus.h" #include "target/riscv/cpu.h" +#include "target/riscv/time_helper.h" #include "hw/qdev-properties.h" #include "hw/intc/riscv_aclint.h" #include "qemu/timer.h" @@ -XXX,XX +XXX,XX @@ static void riscv_aclint_mtimer_write(void *opaque, hwaddr addr, riscv_aclint_mtimer_write_timecmp(mtimer, RISCV_CPU(cpu), mtimer->hartid_base + i, mtimer->timecmp[i]); + riscv_timer_write_timecmp(env, env->stimer, env->stimecmp, 0, MIP_STIP); + riscv_timer_write_timecmp(env, env->vstimer, env->vstimecmp, + env->htimedelta, MIP_VSTIP); + } return; } -- 2.50.0 From: Jim Shu <jim.shu@sifive.com> VSTIP is only writable when both [mh]envcfg.STCE is enabled, or it will revert it's defined behavior as if sstc extension is not implemented. Signed-off-by: Jim Shu <jim.shu@sifive.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250519143518.11086-4-jim.shu@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException rmw_mip64(CPURISCVState *env, int csrno, if (riscv_cpu_cfg(env)->ext_sstc && (env->priv == PRV_M) && get_field(env->menvcfg, MENVCFG_STCE)) { /* sstc extension forbids STIP & VSTIP to be writeable in mip */ - mask = mask & ~(MIP_STIP | MIP_VSTIP); + + /* STIP is not writable when menvcfg.STCE is enabled. */ + mask = mask & ~MIP_STIP; + + /* VSTIP is not writable when both [mh]envcfg.STCE are enabled. */ + if (get_field(env->henvcfg, HENVCFG_STCE)) { + mask = mask & ~MIP_VSTIP; + } } if (mask) { -- 2.50.0 From: Jim Shu <jim.shu@sifive.com> Updating STCE will enable/disable SSTC in S-mode or/and VS-mode, so we also need to update S/VS-mode Timer and S/VSTIP bits in $mip CSR. Signed-off-by: Jim Shu <jim.shu@sifive.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250519143518.11086-5-jim.shu@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/time_helper.h | 1 + target/riscv/csr.c | 46 ++++++++++++++++++++++++++++++++++++++ target/riscv/time_helper.c | 46 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 93 insertions(+) diff --git a/target/riscv/time_helper.h b/target/riscv/time_helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/time_helper.h +++ b/target/riscv/time_helper.h @@ -XXX,XX +XXX,XX @@ void riscv_timer_write_timecmp(CPURISCVState *env, QEMUTimer *timer, uint64_t timecmp, uint64_t delta, uint32_t timer_irq); +void riscv_timer_stce_changed(CPURISCVState *env, bool is_m_mode, bool enable); void riscv_timer_init(RISCVCPU *cpu); #endif diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException write_menvcfg(CPURISCVState *env, int csrno, const RISCVCPUConfig *cfg = riscv_cpu_cfg(env); uint64_t mask = MENVCFG_FIOM | MENVCFG_CBIE | MENVCFG_CBCFE | MENVCFG_CBZE | MENVCFG_CDE; + bool stce_changed = false; if (riscv_cpu_mxl(env) == MXL_RV64) { mask |= (cfg->ext_svpbmt ? MENVCFG_PBMTE : 0) | @@ -XXX,XX +XXX,XX @@ static RISCVException write_menvcfg(CPURISCVState *env, int csrno, if ((val & MENVCFG_DTE) == 0) { env->mstatus &= ~MSTATUS_SDT; } + + if (cfg->ext_sstc && + ((env->menvcfg & MENVCFG_STCE) != (val & MENVCFG_STCE))) { + stce_changed = true; + } } env->menvcfg = (env->menvcfg & ~mask) | (val & mask); + + if (stce_changed) { + riscv_timer_stce_changed(env, true, !!(val & MENVCFG_STCE)); + } + return write_henvcfg(env, CSR_HENVCFG, env->henvcfg, ra); } @@ -XXX,XX +XXX,XX @@ static RISCVException write_menvcfgh(CPURISCVState *env, int csrno, (cfg->ext_smcdeleg ? MENVCFG_CDE : 0) | (cfg->ext_ssdbltrp ? MENVCFG_DTE : 0); uint64_t valh = (uint64_t)val << 32; + bool stce_changed = false; + + if (cfg->ext_sstc && + ((env->menvcfg & MENVCFG_STCE) != (valh & MENVCFG_STCE))) { + stce_changed = true; + } if ((valh & MENVCFG_DTE) == 0) { env->mstatus &= ~MSTATUS_SDT; } env->menvcfg = (env->menvcfg & ~mask) | (valh & mask); + + if (stce_changed) { + riscv_timer_stce_changed(env, true, !!(valh & MENVCFG_STCE)); + } + return write_henvcfgh(env, CSR_HENVCFGH, env->henvcfg >> 32, ra); } @@ -XXX,XX +XXX,XX @@ static RISCVException read_henvcfg(CPURISCVState *env, int csrno, static RISCVException write_henvcfg(CPURISCVState *env, int csrno, target_ulong val, uintptr_t ra) { + const RISCVCPUConfig *cfg = riscv_cpu_cfg(env); uint64_t mask = HENVCFG_FIOM | HENVCFG_CBIE | HENVCFG_CBCFE | HENVCFG_CBZE; RISCVException ret; + bool stce_changed = false; ret = smstateen_acc_ok(env, 0, SMSTATEEN0_HSENVCFG); if (ret != RISCV_EXCP_NONE) { @@ -XXX,XX +XXX,XX @@ static RISCVException write_henvcfg(CPURISCVState *env, int csrno, get_field(val, HENVCFG_PMM) != PMM_FIELD_RESERVED) { mask |= HENVCFG_PMM; } + + if (cfg->ext_sstc && + ((env->henvcfg & HENVCFG_STCE) != (val & HENVCFG_STCE))) { + stce_changed = true; + } } env->henvcfg = val & mask; @@ -XXX,XX +XXX,XX @@ static RISCVException write_henvcfg(CPURISCVState *env, int csrno, env->vsstatus &= ~MSTATUS_SDT; } + if (stce_changed) { + riscv_timer_stce_changed(env, false, !!(val & HENVCFG_STCE)); + } + return RISCV_EXCP_NONE; } @@ -XXX,XX +XXX,XX @@ static RISCVException read_henvcfgh(CPURISCVState *env, int csrno, static RISCVException write_henvcfgh(CPURISCVState *env, int csrno, target_ulong val, uintptr_t ra) { + const RISCVCPUConfig *cfg = riscv_cpu_cfg(env); uint64_t mask = env->menvcfg & (HENVCFG_PBMTE | HENVCFG_STCE | HENVCFG_ADUE | HENVCFG_DTE); uint64_t valh = (uint64_t)val << 32; RISCVException ret; + bool stce_changed = false; ret = smstateen_acc_ok(env, 0, SMSTATEEN0_HSENVCFG); if (ret != RISCV_EXCP_NONE) { return ret; } + + if (cfg->ext_sstc && + ((env->henvcfg & HENVCFG_STCE) != (valh & HENVCFG_STCE))) { + stce_changed = true; + } + env->henvcfg = (env->henvcfg & 0xFFFFFFFF) | (valh & mask); if ((env->henvcfg & HENVCFG_DTE) == 0) { env->vsstatus &= ~MSTATUS_SDT; } + + if (stce_changed) { + riscv_timer_stce_changed(env, false, !!(val & HENVCFG_STCE)); + } + return RISCV_EXCP_NONE; } diff --git a/target/riscv/time_helper.c b/target/riscv/time_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/time_helper.c +++ b/target/riscv/time_helper.c @@ -XXX,XX +XXX,XX @@ void riscv_timer_write_timecmp(CPURISCVState *env, QEMUTimer *timer, timer_mod(timer, next); } +/* + * When disabling xenvcfg.STCE, the S/VS Timer may be disabled at the same time. + * It is safe to call this function regardless of whether the timer has been + * deleted or not. timer_del() will do nothing if the timer has already + * been deleted. + */ +static void riscv_timer_disable_timecmp(CPURISCVState *env, QEMUTimer *timer, + uint32_t timer_irq) +{ + /* Disable S-mode Timer IRQ and HW-based STIP */ + if ((timer_irq == MIP_STIP) && !get_field(env->menvcfg, MENVCFG_STCE)) { + riscv_cpu_update_mip(env, timer_irq, BOOL_TO_MASK(0)); + timer_del(timer); + return; + } + + /* Disable VS-mode Timer IRQ and HW-based VSTIP */ + if ((timer_irq == MIP_VSTIP) && + (!get_field(env->menvcfg, MENVCFG_STCE) || + !get_field(env->henvcfg, HENVCFG_STCE))) { + env->vstime_irq = 0; + riscv_cpu_update_mip(env, 0, BOOL_TO_MASK(0)); + timer_del(timer); + return; + } +} + +/* Enable or disable S/VS-mode Timer when xenvcfg.STCE is changed */ +void riscv_timer_stce_changed(CPURISCVState *env, bool is_m_mode, bool enable) +{ + if (enable) { + riscv_timer_write_timecmp(env, env->vstimer, env->vstimecmp, + env->htimedelta, MIP_VSTIP); + } else { + riscv_timer_disable_timecmp(env, env->vstimer, MIP_VSTIP); + } + + if (is_m_mode) { + if (enable) { + riscv_timer_write_timecmp(env, env->stimer, env->stimecmp, 0, MIP_STIP); + } else { + riscv_timer_disable_timecmp(env, env->stimer, MIP_STIP); + } + } +} + void riscv_timer_init(RISCVCPU *cpu) { CPURISCVState *env; -- 2.50.0 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Put it after zalrsc and before zawrs. Cc: qemu-trivial@nongnu.org Fixes: a60ce58fd9 ("target/riscv: Support Zama16b extension") Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250522113344.823294-1-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(zaamo, PRIV_VERSION_1_12_0, ext_zaamo), ISA_EXT_DATA_ENTRY(zabha, PRIV_VERSION_1_13_0, ext_zabha), ISA_EXT_DATA_ENTRY(zacas, PRIV_VERSION_1_12_0, ext_zacas), - ISA_EXT_DATA_ENTRY(zama16b, PRIV_VERSION_1_13_0, ext_zama16b), ISA_EXT_DATA_ENTRY(zalrsc, PRIV_VERSION_1_12_0, ext_zalrsc), + ISA_EXT_DATA_ENTRY(zama16b, PRIV_VERSION_1_13_0, ext_zama16b), ISA_EXT_DATA_ENTRY(zawrs, PRIV_VERSION_1_12_0, ext_zawrs), ISA_EXT_DATA_ENTRY(zfa, PRIV_VERSION_1_12_0, ext_zfa), ISA_EXT_DATA_ENTRY(zfbfmin, PRIV_VERSION_1_12_0, ext_zfbfmin), -- 2.50.0 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> We're changing 'mmu' to true regardless of whether the profile is being enabled or not, and at the same time we're changing satp_mode to profile->enabled. This will promote a situation where we'll set mmu=on without a virtual memory mode, which is a mistake. Only touch 'mmu' and satp_mode if the profile is being enabled. Suggested-by: Andrew Jones <ajones@ventanamicro.com> Fixes: 55398025e7 ("target/riscv: add satp_mode profile support") Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Björn Töpel <bjorn@rivosinc.com> Tested-by: Björn Töpel <bjorn@rivosinc.com> Message-ID: <20250528184407.1451983-2-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void cpu_set_profile(Object *obj, Visitor *v, const char *name, if (profile->enabled) { cpu->env.priv_ver = profile->priv_spec; - } #ifndef CONFIG_USER_ONLY - if (profile->satp_mode != RISCV_PROFILE_ATTR_UNUSED) { - object_property_set_bool(obj, "mmu", true, NULL); - const char *satp_prop = satp_mode_str(profile->satp_mode, - riscv_cpu_is_32bit(cpu)); - object_property_set_bool(obj, satp_prop, profile->enabled, NULL); - } + if (profile->satp_mode != RISCV_PROFILE_ATTR_UNUSED) { + object_property_set_bool(obj, "mmu", true, NULL); + const char *satp_prop = satp_mode_str(profile->satp_mode, + riscv_cpu_is_32bit(cpu)); + object_property_set_bool(obj, satp_prop, true, NULL); + } #endif + } for (i = 0; misa_bits[i] != 0; i++) { uint32_t bit = misa_bits[i]; -- 2.50.0 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> We have code in riscv_cpu_add_profiles() to enable a profile right away in case a CPU chose the profile during its cpu_init(). But we're using the user callback option to do so, setting profile->user_set. Create a new helper that does all the grunt work to enable/disable a given profile. Use this new helper in the cases where we want a CPU to be compatible to a certain profile, leaving the user callback to be used exclusively by users. Fixes: fba92a92e3 ("target/riscv: add 'rva22u64' CPU") Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Björn Töpel <bjorn@rivosinc.com> Tested-by: Björn Töpel <bjorn@rivosinc.com> Message-ID: <20250528184407.1451983-3-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 127 +++++++++++++++++++------------------ 1 file changed, 67 insertions(+), 60 deletions(-) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static bool riscv_cpu_is_generic(Object *cpu_obj) return object_dynamic_cast(cpu_obj, TYPE_RISCV_DYNAMIC_CPU) != NULL; } +static void riscv_cpu_set_profile(RISCVCPU *cpu, + RISCVCPUProfile *profile, + bool enabled) +{ + int i, ext_offset; + + if (profile->u_parent != NULL) { + riscv_cpu_set_profile(cpu, profile->u_parent, enabled); + } + + if (profile->s_parent != NULL) { + riscv_cpu_set_profile(cpu, profile->s_parent, enabled); + } + + profile->enabled = enabled; + + if (profile->enabled) { + cpu->env.priv_ver = profile->priv_spec; + +#ifndef CONFIG_USER_ONLY + if (profile->satp_mode != RISCV_PROFILE_ATTR_UNUSED) { + object_property_set_bool(OBJECT(cpu), "mmu", true, NULL); + const char *satp_prop = satp_mode_str(profile->satp_mode, + riscv_cpu_is_32bit(cpu)); + object_property_set_bool(OBJECT(cpu), satp_prop, true, NULL); + } +#endif + } + + for (i = 0; misa_bits[i] != 0; i++) { + uint32_t bit = misa_bits[i]; + + if (!(profile->misa_ext & bit)) { + continue; + } + + if (bit == RVI && !profile->enabled) { + /* + * Disabling profiles will not disable the base + * ISA RV64I. + */ + continue; + } + + cpu_misa_ext_add_user_opt(bit, profile->enabled); + riscv_cpu_write_misa_bit(cpu, bit, profile->enabled); + } + + for (i = 0; profile->ext_offsets[i] != RISCV_PROFILE_EXT_LIST_END; i++) { + ext_offset = profile->ext_offsets[i]; + + if (profile->enabled) { + if (cpu_cfg_offset_is_named_feat(ext_offset)) { + riscv_cpu_enable_named_feat(cpu, ext_offset); + } + + cpu_bump_multi_ext_priv_ver(&cpu->env, ext_offset); + } + + cpu_cfg_ext_add_user_opt(ext_offset, profile->enabled); + isa_ext_update_enabled(cpu, ext_offset, profile->enabled); + } +} + /* * We'll get here via the following path: * @@ -XXX,XX +XXX,XX @@ static void cpu_set_profile(Object *obj, Visitor *v, const char *name, RISCVCPUProfile *profile = opaque; RISCVCPU *cpu = RISCV_CPU(obj); bool value; - int i, ext_offset; if (riscv_cpu_is_vendor(obj)) { error_setg(errp, "Profile %s is not available for vendor CPUs", @@ -XXX,XX +XXX,XX @@ static void cpu_set_profile(Object *obj, Visitor *v, const char *name, } profile->user_set = true; - profile->enabled = value; - - if (profile->u_parent != NULL) { - object_property_set_bool(obj, profile->u_parent->name, - profile->enabled, NULL); - } - - if (profile->s_parent != NULL) { - object_property_set_bool(obj, profile->s_parent->name, - profile->enabled, NULL); - } - - if (profile->enabled) { - cpu->env.priv_ver = profile->priv_spec; - -#ifndef CONFIG_USER_ONLY - if (profile->satp_mode != RISCV_PROFILE_ATTR_UNUSED) { - object_property_set_bool(obj, "mmu", true, NULL); - const char *satp_prop = satp_mode_str(profile->satp_mode, - riscv_cpu_is_32bit(cpu)); - object_property_set_bool(obj, satp_prop, true, NULL); - } -#endif - } - - for (i = 0; misa_bits[i] != 0; i++) { - uint32_t bit = misa_bits[i]; - - if (!(profile->misa_ext & bit)) { - continue; - } - if (bit == RVI && !profile->enabled) { - /* - * Disabling profiles will not disable the base - * ISA RV64I. - */ - continue; - } - - cpu_misa_ext_add_user_opt(bit, profile->enabled); - riscv_cpu_write_misa_bit(cpu, bit, profile->enabled); - } - - for (i = 0; profile->ext_offsets[i] != RISCV_PROFILE_EXT_LIST_END; i++) { - ext_offset = profile->ext_offsets[i]; - - if (profile->enabled) { - if (cpu_cfg_offset_is_named_feat(ext_offset)) { - riscv_cpu_enable_named_feat(cpu, ext_offset); - } - - cpu_bump_multi_ext_priv_ver(&cpu->env, ext_offset); - } - - cpu_cfg_ext_add_user_opt(ext_offset, profile->enabled); - isa_ext_update_enabled(cpu, ext_offset, profile->enabled); - } + riscv_cpu_set_profile(cpu, profile, value); } static void cpu_get_profile(Object *obj, Visitor *v, const char *name, @@ -XXX,XX +XXX,XX @@ static void cpu_get_profile(Object *obj, Visitor *v, const char *name, static void riscv_cpu_add_profiles(Object *cpu_obj) { for (int i = 0; riscv_profiles[i] != NULL; i++) { - const RISCVCPUProfile *profile = riscv_profiles[i]; + RISCVCPUProfile *profile = riscv_profiles[i]; object_property_add(cpu_obj, profile->name, "bool", cpu_get_profile, cpu_set_profile, @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_add_profiles(Object *cpu_obj) * case. */ if (profile->enabled) { - object_property_set_bool(cpu_obj, profile->name, true, NULL); + riscv_cpu_set_profile(RISCV_CPU(cpu_obj), profile, true); } } } -- 2.50.0 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Björn reported in [1] a case where a rv64 CPU is going through the profile code path to enable satp mode. In this case,the amount of extensions on top of the rv64 CPU made it compliant with the RVA22S64 profile during the validation of CPU 0. When the subsequent CPUs were initialized the static profile object has the 'enable' flag set, enabling the profile code path for those CPUs. This happens because we are initializing and realizing each CPU before going to the next, i.e. init and realize CPU0, then init and realize CPU1 and so on. If we change any persistent state during the validation of CPU N it will interfere with the init/realization of CPU N+1. We're using the 'enabled' profile flag to do two distinct things: inform cpu_init() that we want profile extensions to be enabled, and telling QMP that a profile is currently enabled in the CPU. We want to be flexible enough to recognize profile support for all CPUs that has the extension prerequisites, but we do not want to force the profile code path if a profile wasn't set too. Add a new 'present' flag for profiles that will coexist with the 'enabled' flag. Enabling a profile means "we want to switch on all its mandatory extensions". A profile is 'present' if we asserted during validation that the CPU has the needed prerequisites. This means that the case reported by Björn now results in RVA22S64.enabled=false and RVA22S64.present=true. QMP will recognize it as a RVA22 compliant CPU and we won't force the CPU into the profile path. [1] https://lore.kernel.org/qemu-riscv/87y0usiz22.fsf@all.your.base.are.belong.to.us/ Reported-by: Björn Töpel <bjorn@kernel.org> Fixes: 2af005d610 ("target/riscv/tcg: validate profiles during finalize") Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Björn Töpel <bjorn@rivosinc.com> Tested-by: Björn Töpel <bjorn@rivosinc.com> Message-ID: <20250528184407.1451983-4-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 15 +++++++++++++++ target/riscv/riscv-qmp-cmds.c | 2 +- target/riscv/tcg/tcg-cpu.c | 11 +++-------- 3 files changed, 19 insertions(+), 9 deletions(-) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct riscv_cpu_profile { struct riscv_cpu_profile *s_parent; const char *name; uint32_t misa_ext; + /* + * The profile is enabled/disabled via command line or + * via cpu_init(). Enabling a profile will add all its + * mandatory extensions in the CPU during init(). + */ bool enabled; + /* + * The profile is present in the CPU, i.e. the current set of + * CPU extensions complies with it. A profile can be enabled + * and not present (e.g. the user disabled a mandatory extension) + * and the other way around (e.g. all mandatory extensions are + * present in a non-profile CPU). + * + * QMP uses this flag. + */ + bool present; bool user_set; int priv_spec; int satp_mode; diff --git a/target/riscv/riscv-qmp-cmds.c b/target/riscv/riscv-qmp-cmds.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/riscv-qmp-cmds.c +++ b/target/riscv/riscv-qmp-cmds.c @@ -XXX,XX +XXX,XX @@ static void riscv_obj_add_profiles_qdict(Object *obj, QDict *qdict_out) for (int i = 0; riscv_profiles[i] != NULL; i++) { profile = riscv_profiles[i]; - value = QOBJECT(qbool_from_bool(profile->enabled)); + value = QOBJECT(qbool_from_bool(profile->present)); qdict_put_obj(qdict_out, profile->name, value); } diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_check_parent_profile(RISCVCPU *cpu, RISCVCPUProfile *profile, RISCVCPUProfile *parent) { - const char *parent_name; - bool parent_enabled; - - if (!profile->enabled || !parent) { + if (!profile->present || !parent) { return; } - parent_name = parent->name; - parent_enabled = object_property_get_bool(OBJECT(cpu), parent_name, NULL); - profile->enabled = parent_enabled; + profile->present = parent->present; } static void riscv_cpu_validate_profile(RISCVCPU *cpu, @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_validate_profile(RISCVCPU *cpu, } } - profile->enabled = profile_impl; + profile->present = profile_impl; riscv_cpu_check_parent_profile(cpu, profile, profile->u_parent); riscv_cpu_check_parent_profile(cpu, profile, profile->s_parent); -- 2.50.0 From: Jay Chang <jay.chang@sifive.com> According to the RISC-V Privileged Specification (version >1.12), RV32 supports 16 CSRs (pmpcfg0–pmpcfg15) to configure 64 PMP regions (pmpaddr0–pmpaddr63). Signed-off-by: Jay Chang <jay.chang@sifive.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20250522081236.4050-2-jay.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu_bits.h | 60 +++++++++++++++++++ target/riscv/csr.c | 124 +++++++++++++++++++++++++++++++++++++++- 2 files changed, 182 insertions(+), 2 deletions(-) diff --git a/target/riscv/cpu_bits.h b/target/riscv/cpu_bits.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_bits.h +++ b/target/riscv/cpu_bits.h @@ -XXX,XX +XXX,XX @@ #define CSR_PMPCFG1 0x3a1 #define CSR_PMPCFG2 0x3a2 #define CSR_PMPCFG3 0x3a3 +#define CSR_PMPCFG4 0x3a4 +#define CSR_PMPCFG5 0x3a5 +#define CSR_PMPCFG6 0x3a6 +#define CSR_PMPCFG7 0x3a7 +#define CSR_PMPCFG8 0x3a8 +#define CSR_PMPCFG9 0x3a9 +#define CSR_PMPCFG10 0x3aa +#define CSR_PMPCFG11 0x3ab +#define CSR_PMPCFG12 0x3ac +#define CSR_PMPCFG13 0x3ad +#define CSR_PMPCFG14 0x3ae +#define CSR_PMPCFG15 0x3af #define CSR_PMPADDR0 0x3b0 #define CSR_PMPADDR1 0x3b1 #define CSR_PMPADDR2 0x3b2 @@ -XXX,XX +XXX,XX @@ #define CSR_PMPADDR13 0x3bd #define CSR_PMPADDR14 0x3be #define CSR_PMPADDR15 0x3bf +#define CSR_PMPADDR16 0x3c0 +#define CSR_PMPADDR17 0x3c1 +#define CSR_PMPADDR18 0x3c2 +#define CSR_PMPADDR19 0x3c3 +#define CSR_PMPADDR20 0x3c4 +#define CSR_PMPADDR21 0x3c5 +#define CSR_PMPADDR22 0x3c6 +#define CSR_PMPADDR23 0x3c7 +#define CSR_PMPADDR24 0x3c8 +#define CSR_PMPADDR25 0x3c9 +#define CSR_PMPADDR26 0x3ca +#define CSR_PMPADDR27 0x3cb +#define CSR_PMPADDR28 0x3cc +#define CSR_PMPADDR29 0x3cd +#define CSR_PMPADDR30 0x3ce +#define CSR_PMPADDR31 0x3cf +#define CSR_PMPADDR32 0x3d0 +#define CSR_PMPADDR33 0x3d1 +#define CSR_PMPADDR34 0x3d2 +#define CSR_PMPADDR35 0x3d3 +#define CSR_PMPADDR36 0x3d4 +#define CSR_PMPADDR37 0x3d5 +#define CSR_PMPADDR38 0x3d6 +#define CSR_PMPADDR39 0x3d7 +#define CSR_PMPADDR40 0x3d8 +#define CSR_PMPADDR41 0x3d9 +#define CSR_PMPADDR42 0x3da +#define CSR_PMPADDR43 0x3db +#define CSR_PMPADDR44 0x3dc +#define CSR_PMPADDR45 0x3dd +#define CSR_PMPADDR46 0x3de +#define CSR_PMPADDR47 0x3df +#define CSR_PMPADDR48 0x3e0 +#define CSR_PMPADDR49 0x3e1 +#define CSR_PMPADDR50 0x3e2 +#define CSR_PMPADDR51 0x3e3 +#define CSR_PMPADDR52 0x3e4 +#define CSR_PMPADDR53 0x3e5 +#define CSR_PMPADDR54 0x3e6 +#define CSR_PMPADDR55 0x3e7 +#define CSR_PMPADDR56 0x3e8 +#define CSR_PMPADDR57 0x3e9 +#define CSR_PMPADDR58 0x3ea +#define CSR_PMPADDR59 0x3eb +#define CSR_PMPADDR60 0x3ec +#define CSR_PMPADDR61 0x3ed +#define CSR_PMPADDR62 0x3ee +#define CSR_PMPADDR63 0x3ef /* RNMI */ #define CSR_MNSCRATCH 0x740 diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ riscv_csr_operations csr_ops[CSR_TABLE_SIZE] = { [CSR_PMPCFG1] = { "pmpcfg1", pmp, read_pmpcfg, write_pmpcfg }, [CSR_PMPCFG2] = { "pmpcfg2", pmp, read_pmpcfg, write_pmpcfg }, [CSR_PMPCFG3] = { "pmpcfg3", pmp, read_pmpcfg, write_pmpcfg }, + [CSR_PMPCFG4] = { "pmpcfg4", pmp, read_pmpcfg, write_pmpcfg, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPCFG5] = { "pmpcfg5", pmp, read_pmpcfg, write_pmpcfg, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPCFG6] = { "pmpcfg6", pmp, read_pmpcfg, write_pmpcfg, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPCFG7] = { "pmpcfg7", pmp, read_pmpcfg, write_pmpcfg, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPCFG8] = { "pmpcfg8", pmp, read_pmpcfg, write_pmpcfg, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPCFG9] = { "pmpcfg9", pmp, read_pmpcfg, write_pmpcfg, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPCFG10] = { "pmpcfg10", pmp, read_pmpcfg, write_pmpcfg, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPCFG11] = { "pmpcfg11", pmp, read_pmpcfg, write_pmpcfg, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPCFG12] = { "pmpcfg12", pmp, read_pmpcfg, write_pmpcfg, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPCFG13] = { "pmpcfg13", pmp, read_pmpcfg, write_pmpcfg, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPCFG14] = { "pmpcfg14", pmp, read_pmpcfg, write_pmpcfg, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPCFG15] = { "pmpcfg15", pmp, read_pmpcfg, write_pmpcfg, + .min_priv_ver = PRIV_VERSION_1_12_0 }, [CSR_PMPADDR0] = { "pmpaddr0", pmp, read_pmpaddr, write_pmpaddr }, [CSR_PMPADDR1] = { "pmpaddr1", pmp, read_pmpaddr, write_pmpaddr }, [CSR_PMPADDR2] = { "pmpaddr2", pmp, read_pmpaddr, write_pmpaddr }, @@ -XXX,XX +XXX,XX @@ riscv_csr_operations csr_ops[CSR_TABLE_SIZE] = { [CSR_PMPADDR11] = { "pmpaddr11", pmp, read_pmpaddr, write_pmpaddr }, [CSR_PMPADDR12] = { "pmpaddr12", pmp, read_pmpaddr, write_pmpaddr }, [CSR_PMPADDR13] = { "pmpaddr13", pmp, read_pmpaddr, write_pmpaddr }, - [CSR_PMPADDR14] = { "pmpaddr14", pmp, read_pmpaddr, write_pmpaddr }, - [CSR_PMPADDR15] = { "pmpaddr15", pmp, read_pmpaddr, write_pmpaddr }, + [CSR_PMPADDR14] = { "pmpaddr14", pmp, read_pmpaddr, write_pmpaddr }, + [CSR_PMPADDR15] = { "pmpaddr15", pmp, read_pmpaddr, write_pmpaddr }, + [CSR_PMPADDR16] = { "pmpaddr16", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR17] = { "pmpaddr17", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR18] = { "pmpaddr18", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR19] = { "pmpaddr19", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR20] = { "pmpaddr20", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR21] = { "pmpaddr21", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR22] = { "pmpaddr22", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR23] = { "pmpaddr23", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR24] = { "pmpaddr24", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR25] = { "pmpaddr25", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR26] = { "pmpaddr26", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR27] = { "pmpaddr27", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR28] = { "pmpaddr28", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR29] = { "pmpaddr29", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR30] = { "pmpaddr30", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR31] = { "pmpaddr31", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR32] = { "pmpaddr32", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR33] = { "pmpaddr33", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR34] = { "pmpaddr34", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR35] = { "pmpaddr35", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR36] = { "pmpaddr36", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR37] = { "pmpaddr37", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR38] = { "pmpaddr38", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR39] = { "pmpaddr39", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR40] = { "pmpaddr40", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR41] = { "pmpaddr41", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR42] = { "pmpaddr42", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR43] = { "pmpaddr43", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR44] = { "pmpaddr44", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR45] = { "pmpaddr45", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR46] = { "pmpaddr46", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR47] = { "pmpaddr47", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR48] = { "pmpaddr48", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR49] = { "pmpaddr49", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR50] = { "pmpaddr50", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR51] = { "pmpaddr51", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR52] = { "pmpaddr52", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR53] = { "pmpaddr53", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR54] = { "pmpaddr54", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR55] = { "pmpaddr55", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR56] = { "pmpaddr56", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR57] = { "pmpaddr57", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR58] = { "pmpaddr58", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR59] = { "pmpaddr59", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR60] = { "pmpaddr60", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR61] = { "pmpaddr61", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR62] = { "pmpaddr62", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, + [CSR_PMPADDR63] = { "pmpaddr63", pmp, read_pmpaddr, write_pmpaddr, + .min_priv_ver = PRIV_VERSION_1_12_0 }, /* Debug CSRs */ [CSR_TSELECT] = { "tselect", debug, read_tselect, write_tselect }, -- 2.50.0 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> These properties were deprecated in QEMU 8.2, commit 8043effd9b. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250530134608.1806922-1-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 1 - target/riscv/cpu.c | 17 ----------------- target/riscv/tcg/tcg-cpu.c | 31 +------------------------------ 3 files changed, 1 insertion(+), 48 deletions(-) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ extern const RISCVCPUMultiExtConfig riscv_cpu_extensions[]; extern const RISCVCPUMultiExtConfig riscv_cpu_vendor_exts[]; extern const RISCVCPUMultiExtConfig riscv_cpu_experimental_exts[]; extern const RISCVCPUMultiExtConfig riscv_cpu_named_features[]; -extern const RISCVCPUMultiExtConfig riscv_cpu_deprecated_exts[]; typedef struct isa_ext_data { const char *name; diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const RISCVCPUMultiExtConfig riscv_cpu_named_features[] = { { }, }; -/* Deprecated entries marked for future removal */ -const RISCVCPUMultiExtConfig riscv_cpu_deprecated_exts[] = { - MULTI_EXT_CFG_BOOL("Zifencei", ext_zifencei, true), - MULTI_EXT_CFG_BOOL("Zicsr", ext_zicsr, true), - MULTI_EXT_CFG_BOOL("Zihintntl", ext_zihintntl, true), - MULTI_EXT_CFG_BOOL("Zihintpause", ext_zihintpause, true), - MULTI_EXT_CFG_BOOL("Zawrs", ext_zawrs, true), - MULTI_EXT_CFG_BOOL("Zfa", ext_zfa, true), - MULTI_EXT_CFG_BOOL("Zfh", ext_zfh, false), - MULTI_EXT_CFG_BOOL("Zfhmin", ext_zfhmin, false), - MULTI_EXT_CFG_BOOL("Zve32f", ext_zve32f, false), - MULTI_EXT_CFG_BOOL("Zve64f", ext_zve64f, false), - MULTI_EXT_CFG_BOOL("Zve64d", ext_zve64d, false), - - { }, -}; - static void cpu_set_prop_err(RISCVCPU *cpu, const char *propname, Error **errp) { diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_add_profiles(Object *cpu_obj) } } -static bool cpu_ext_is_deprecated(const char *ext_name) -{ - return isupper(ext_name[0]); -} - -/* - * String will be allocated in the heap. Caller is responsible - * for freeing it. - */ -static char *cpu_ext_to_lower(const char *ext_name) -{ - char *ret = g_malloc0(strlen(ext_name) + 1); - - strcpy(ret, ext_name); - ret[0] = tolower(ret[0]); - - return ret; -} - static void cpu_set_multi_ext_cfg(Object *obj, Visitor *v, const char *name, void *opaque, Error **errp) { @@ -XXX,XX +XXX,XX @@ static void cpu_set_multi_ext_cfg(Object *obj, Visitor *v, const char *name, return; } - if (cpu_ext_is_deprecated(multi_ext_cfg->name)) { - g_autofree char *lower = cpu_ext_to_lower(multi_ext_cfg->name); - - warn_report("CPU property '%s' is deprecated. Please use '%s' instead", - multi_ext_cfg->name, lower); - } - cpu_cfg_ext_add_user_opt(multi_ext_cfg->offset, value); prev_val = isa_ext_is_enabled(cpu, multi_ext_cfg->offset); @@ -XXX,XX +XXX,XX @@ static void cpu_add_multi_ext_prop(Object *cpu_obj, const RISCVCPUMultiExtConfig *multi_cfg) { bool generic_cpu = riscv_cpu_is_generic(cpu_obj); - bool deprecated_ext = cpu_ext_is_deprecated(multi_cfg->name); object_property_add(cpu_obj, multi_cfg->name, "bool", cpu_get_multi_ext_cfg, cpu_set_multi_ext_cfg, NULL, (void *)multi_cfg); - if (!generic_cpu || deprecated_ext) { + if (!generic_cpu) { return; } @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_add_user_properties(Object *obj) riscv_cpu_add_multiext_prop_array(obj, riscv_cpu_vendor_exts); riscv_cpu_add_multiext_prop_array(obj, riscv_cpu_experimental_exts); - riscv_cpu_add_multiext_prop_array(obj, riscv_cpu_deprecated_exts); - riscv_cpu_add_profiles(obj); } -- 2.50.0 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> We have support for sdtrig for awhile but we are not advertising it. It is enabled by default via the 'debug' flag. Use the same flag to also advertise sdtrig. Add an exception in disable_priv_spec_isa_exts() to avoid spamming warnings for 'sdtrig' for vendor CPUs like sifive_u. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250604174329.1147549-2-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 1 + target/riscv/tcg/tcg-cpu.c | 9 +++++++++ tests/data/acpi/riscv64/virt/RHCT | Bin 400 -> 406 bytes 3 files changed, 10 insertions(+) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(zvkt, PRIV_VERSION_1_12_0, ext_zvkt), ISA_EXT_DATA_ENTRY(zhinx, PRIV_VERSION_1_12_0, ext_zhinx), ISA_EXT_DATA_ENTRY(zhinxmin, PRIV_VERSION_1_12_0, ext_zhinxmin), + ISA_EXT_DATA_ENTRY(sdtrig, PRIV_VERSION_1_12_0, debug), ISA_EXT_DATA_ENTRY(shcounterenw, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(sha, PRIV_VERSION_1_12_0, ext_sha), ISA_EXT_DATA_ENTRY(shgatpa, PRIV_VERSION_1_12_0, has_priv_1_12), diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_disable_priv_spec_isa_exts(RISCVCPU *cpu) continue; } + /* + * cpu.debug = true is marked as 'sdtrig', priv spec 1.12. + * Skip this warning since existing CPUs with older priv + * spec and debug = true will be impacted. + */ + if (!strcmp(edata->name, "sdtrig")) { + continue; + } + isa_ext_update_enabled(cpu, edata->ext_enable_offset, false); /* diff --git a/tests/data/acpi/riscv64/virt/RHCT b/tests/data/acpi/riscv64/virt/RHCT index XXXXXXX..XXXXXXX 100644 Binary files a/tests/data/acpi/riscv64/virt/RHCT and b/tests/data/acpi/riscv64/virt/RHCT differ -- 2.50.0 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> 'ssstrict' is a RVA23 profile-defined extension defined as follows: "No non-conforming extensions are present. Attempts to execute unimplemented opcodes or access unimplemented CSRs in the standard or reserved encoding spaces raises an illegal instruction exception that results in a contained trap to the supervisor-mode trap handler." In short, we need to throw an exception when accessing unimplemented CSRs or opcodes. We do that, so let's advertise it. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Message-ID: <20250529202315.1684198-3-dbarboza@ventanamicro.com> Message-ID: <20250604174329.1147549-3-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 1 + tests/data/acpi/riscv64/virt/RHCT | Bin 406 -> 416 bytes 2 files changed, 1 insertion(+) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(ssnpm, PRIV_VERSION_1_13_0, ext_ssnpm), ISA_EXT_DATA_ENTRY(sspm, PRIV_VERSION_1_13_0, ext_sspm), ISA_EXT_DATA_ENTRY(ssstateen, PRIV_VERSION_1_12_0, ext_ssstateen), + ISA_EXT_DATA_ENTRY(ssstrict, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(sstc, PRIV_VERSION_1_12_0, ext_sstc), ISA_EXT_DATA_ENTRY(sstvala, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(sstvecd, PRIV_VERSION_1_12_0, has_priv_1_12), diff --git a/tests/data/acpi/riscv64/virt/RHCT b/tests/data/acpi/riscv64/virt/RHCT index XXXXXXX..XXXXXXX 100644 Binary files a/tests/data/acpi/riscv64/virt/RHCT and b/tests/data/acpi/riscv64/virt/RHCT differ -- 2.50.0 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Most of the named features are added directly in isa_edata_arr[], some of them are also added in riscv_cpu_named_features(). There is a reason for that, and the existing docs can do better explaining it. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20250529202315.1684198-4-dbarboza@ventanamicro.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250604174329.1147549-4-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const RISCVCPUMultiExtConfig riscv_cpu_experimental_exts[] = { * 'Named features' is the name we give to extensions that we * don't want to expose to users. They are either immutable * (always enabled/disable) or they'll vary depending on - * the resulting CPU state. They have riscv,isa strings - * and priv_ver like regular extensions. + * the resulting CPU state. + * + * Some of them are always enabled depending on priv version + * of the CPU and are declared directly in isa_edata_arr[]. + * The ones listed here have special checks during finalize() + * time and require their own flags like regular extensions. + * See riscv_cpu_update_named_features() for more info. */ const RISCVCPUMultiExtConfig riscv_cpu_named_features[] = { MULTI_EXT_CFG_BOOL("zic64b", ext_zic64b, true), MULTI_EXT_CFG_BOOL("ssstateen", ext_ssstateen, true), MULTI_EXT_CFG_BOOL("sha", ext_sha, true), + + /* + * 'ziccrse' has its own flag because the KVM driver + * wants to enable/disable it on its own accord. + */ MULTI_EXT_CFG_BOOL("ziccrse", ext_ziccrse, true), { }, -- 2.50.0 From: Jim Shu <jim.shu@sifive.com> Support 4-byte atomic instruction fetch when instruction is natural aligned. Current implementation is not atomic because it loads instruction twice for first and last 2 bytes. We load 4 bytes at once to keep the atomicity. This instruction preload method only applys when instruction is 4-byte aligned. If instruction is unaligned, it could be across pages so that preload will trigger additional page fault. We encounter this issue when doing pressure test of enabling & disabling Linux kernel ftrace. Ftrace with kernel preemption requires concurrent modification and execution of instruction, so non-atomic instruction fetch will cause the race condition. We may fetch the wrong instruction which is the mixing of 2 instructions. Also, RISC-V Profile wants to provide this feature by HW. RVA20U64 Ziccif protects the atomicity of instruction fetch when it is natural aligned. This commit depends on the atomic read support of translator_ld in the commit 6a9dfe1984b0c593fb0ddb52d4e70832e6201dd6. Signed-off-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250508094838.19394-1-jim.shu@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/translate.c | 46 +++++++++++++++++++++++++++++----------- 1 file changed, 34 insertions(+), 12 deletions(-) diff --git a/target/riscv/translate.c b/target/riscv/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/translate.c +++ b/target/riscv/translate.c @@ -XXX,XX +XXX,XX @@ const RISCVDecoder decoder_table[] = { const size_t decoder_table_size = ARRAY_SIZE(decoder_table); -static void decode_opc(CPURISCVState *env, DisasContext *ctx, uint16_t opcode) +static void decode_opc(CPURISCVState *env, DisasContext *ctx) { + uint32_t opcode; + bool pc_is_4byte_align = ((ctx->base.pc_next % 4) == 0); + ctx->virt_inst_excp = false; - ctx->cur_insn_len = insn_len(opcode); + if (pc_is_4byte_align) { + /* + * Load 4 bytes at once to make instruction fetch atomically. + * + * Note: When pc is 4-byte aligned, 4-byte instruction wouldn't be + * across pages. We could preload 4 bytes instruction no matter + * real one is 2 or 4 bytes. Instruction preload wouldn't trigger + * additional page fault. + */ + opcode = translator_ldl(env, &ctx->base, ctx->base.pc_next); + } else { + /* + * For unaligned pc, instruction preload may trigger additional + * page fault so we only load 2 bytes here. + */ + opcode = (uint32_t) translator_lduw(env, &ctx->base, ctx->base.pc_next); + } + ctx->ol = ctx->xl; + + ctx->cur_insn_len = insn_len((uint16_t)opcode); /* Check for compressed insn */ if (ctx->cur_insn_len == 2) { - ctx->opcode = opcode; + ctx->opcode = (uint16_t)opcode; /* * The Zca extension is added as way to refer to instructions in the C * extension that do not include the floating-point loads and stores @@ -XXX,XX +XXX,XX @@ static void decode_opc(CPURISCVState *env, DisasContext *ctx, uint16_t opcode) return; } } else { - uint32_t opcode32 = opcode; - opcode32 = deposit32(opcode32, 16, 16, - translator_lduw(env, &ctx->base, - ctx->base.pc_next + 2)); - ctx->opcode = opcode32; + if (!pc_is_4byte_align) { + /* Load last 2 bytes of instruction here */ + opcode = deposit32(opcode, 16, 16, + translator_lduw(env, &ctx->base, + ctx->base.pc_next + 2)); + } + ctx->opcode = opcode; for (guint i = 0; i < ctx->decoders->len; ++i) { riscv_cpu_decode_fn func = g_ptr_array_index(ctx->decoders, i); - if (func(ctx, opcode32)) { + if (func(ctx, opcode)) { return; } } @@ -XXX,XX +XXX,XX @@ static void riscv_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) { DisasContext *ctx = container_of(dcbase, DisasContext, base); CPURISCVState *env = cpu_env(cpu); - uint16_t opcode16 = translator_lduw(env, &ctx->base, ctx->base.pc_next); - ctx->ol = ctx->xl; - decode_opc(env, ctx, opcode16); + decode_opc(env, ctx); ctx->base.pc_next += ctx->cur_insn_len; /* -- 2.50.0 From: Meng Zhuo <mengzhuo@iscas.ac.cn> This patch adds max_satp_mode from host kvm cpu setting. Tested on: Milkv Megrez (Eswin 7700x) Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2931 Signed-off-by: Meng Zhuo <mengzhuo@iscas.ac.cn> Message-ID: <20250606034250.181707-1-mengzhuo@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/kvm/kvm-cpu.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/target/riscv/kvm/kvm-cpu.c b/target/riscv/kvm/kvm-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/kvm/kvm-cpu.c +++ b/target/riscv/kvm/kvm-cpu.c @@ -XXX,XX +XXX,XX @@ static void kvm_riscv_destroy_scratch_vcpu(KVMScratchCPU *scratch) close(scratch->kvmfd); } +static void kvm_riscv_init_max_satp_mode(RISCVCPU *cpu, KVMScratchCPU *kvmcpu) +{ + struct kvm_one_reg reg; + int ret; + + reg.id = RISCV_CONFIG_REG(satp_mode); + reg.addr = (uint64_t)&cpu->cfg.max_satp_mode; + ret = ioctl(kvmcpu->cpufd, KVM_GET_ONE_REG, &reg); + if (ret != 0) { + error_report("Unable to retrieve satp mode from host, error %d", ret); + } +} + static void kvm_riscv_init_machine_ids(RISCVCPU *cpu, KVMScratchCPU *kvmcpu) { struct kvm_one_reg reg; @@ -XXX,XX +XXX,XX @@ static void riscv_init_kvm_registers(Object *cpu_obj) kvm_riscv_init_machine_ids(cpu, &kvmcpu); kvm_riscv_init_misa_ext_mask(cpu, &kvmcpu); kvm_riscv_init_cfg(cpu, &kvmcpu); + kvm_riscv_init_max_satp_mode(cpu, &kvmcpu); kvm_riscv_destroy_scratch_vcpu(&kvmcpu); } @@ -XXX,XX +XXX,XX @@ static bool kvm_cpu_realize(CPUState *cs, Error **errp) } } - return true; + return true; } void riscv_kvm_cpu_finalize_features(RISCVCPU *cpu, Error **errp) -- 2.50.0 From: Jay Chang <jay.chang@sifive.com> Previously, the number of PMP regions was hardcoded to 16 in QEMU. This patch replaces the fixed value with a new `pmp_regions` field, allowing platforms to configure the number of PMP regions. If no specific value is provided, the default number of PMP regions remains 16 to preserve the existing behavior. A new CPU parameter num-pmp-regions has been introduced to the QEMU command line. For example: -cpu rv64, g=true, c=true, pmp=true, num-pmp-regions=8 Signed-off-by: Jay Chang <jay.chang@sifive.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250606072525.17313-3-jay.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 3 +- target/riscv/cpu_cfg_fields.h.inc | 1 + target/riscv/cpu.c | 48 +++++++++++++++++++++++++++++-- target/riscv/csr.c | 5 +++- target/riscv/machine.c | 3 +- target/riscv/pmp.c | 28 ++++++++++++------ 6 files changed, 74 insertions(+), 14 deletions(-) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ extern RISCVCPUImpliedExtsRule *riscv_multi_ext_implied_rules[]; #define MMU_USER_IDX 3 -#define MAX_RISCV_PMPS (16) +#define MAX_RISCV_PMPS (64) +#define OLD_MAX_RISCV_PMPS (16) #if !defined(CONFIG_USER_ONLY) #include "pmp.h" diff --git a/target/riscv/cpu_cfg_fields.h.inc b/target/riscv/cpu_cfg_fields.h.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_cfg_fields.h.inc +++ b/target/riscv/cpu_cfg_fields.h.inc @@ -XXX,XX +XXX,XX @@ TYPED_FIELD(uint16_t, elen, 0) TYPED_FIELD(uint16_t, cbom_blocksize, 0) TYPED_FIELD(uint16_t, cbop_blocksize, 0) TYPED_FIELD(uint16_t, cboz_blocksize, 0) +TYPED_FIELD(uint8_t, pmp_regions, 0) TYPED_FIELD(int8_t, max_satp_mode, -1) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_init(Object *obj) cpu->cfg.cbom_blocksize = 64; cpu->cfg.cbop_blocksize = 64; cpu->cfg.cboz_blocksize = 64; + cpu->cfg.pmp_regions = 16; cpu->env.vext_ver = VEXT_VERSION_1_00_0; cpu->cfg.max_satp_mode = -1; @@ -XXX,XX +XXX,XX @@ static const PropertyInfo prop_pmp = { .set = prop_pmp_set, }; +static void prop_num_pmp_regions_set(Object *obj, Visitor *v, const char *name, + void *opaque, Error **errp) +{ + RISCVCPU *cpu = RISCV_CPU(obj); + uint8_t value; + + visit_type_uint8(v, name, &value, errp); + + if (cpu->cfg.pmp_regions != value && riscv_cpu_is_vendor(obj)) { + cpu_set_prop_err(cpu, name, errp); + return; + } + + if (cpu->env.priv_ver < PRIV_VERSION_1_12_0 && value > OLD_MAX_RISCV_PMPS) { + error_setg(errp, "Number of PMP regions exceeds maximum available"); + return; + } else if (value > MAX_RISCV_PMPS) { + error_setg(errp, "Number of PMP regions exceeds maximum available"); + return; + } + + cpu_option_add_user_setting(name, value); + cpu->cfg.pmp_regions = value; +} + +static void prop_num_pmp_regions_get(Object *obj, Visitor *v, const char *name, + void *opaque, Error **errp) +{ + uint8_t value = RISCV_CPU(obj)->cfg.pmp_regions; + + visit_type_uint8(v, name, &value, errp); +} + +static const PropertyInfo prop_num_pmp_regions = { + .type = "uint8", + .description = "num-pmp-regions", + .get = prop_num_pmp_regions_get, + .set = prop_num_pmp_regions_set, +}; + static int priv_spec_from_str(const char *priv_spec_str) { int priv_version = -1; @@ -XXX,XX +XXX,XX @@ static const Property riscv_cpu_properties[] = { {.name = "mmu", .info = &prop_mmu}, {.name = "pmp", .info = &prop_pmp}, + {.name = "num-pmp-regions", .info = &prop_num_pmp_regions}, {.name = "priv_spec", .info = &prop_priv_spec}, {.name = "vext_spec", .info = &prop_vext_spec}, @@ -XXX,XX +XXX,XX @@ static const TypeInfo riscv_cpu_type_infos[] = { .cfg.max_satp_mode = VM_1_10_MBARE, .cfg.ext_zifencei = true, .cfg.ext_zicsr = true, - .cfg.pmp = true + .cfg.pmp = true, + .cfg.pmp_regions = 8 ), DEFINE_ABSTRACT_RISCV_CPU(TYPE_RISCV_CPU_SIFIVE_U, TYPE_RISCV_VENDOR_CPU, @@ -XXX,XX +XXX,XX @@ static const TypeInfo riscv_cpu_type_infos[] = { .cfg.ext_zifencei = true, .cfg.ext_zicsr = true, .cfg.mmu = true, - .cfg.pmp = true + .cfg.pmp = true, + .cfg.pmp_regions = 8 ), #if defined(TARGET_RISCV32) || \ diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException dbltrp_hmode(CPURISCVState *env, int csrno) static RISCVException pmp(CPURISCVState *env, int csrno) { if (riscv_cpu_cfg(env)->pmp) { - if (csrno <= CSR_PMPCFG3) { + int max_pmpcfg = (env->priv_ver >= PRIV_VERSION_1_12_0) ? ++ CSR_PMPCFG15 : CSR_PMPCFG3; + + if (csrno <= max_pmpcfg) { uint32_t reg_index = csrno - CSR_PMPCFG0; /* TODO: RV128 restriction check */ diff --git a/target/riscv/machine.c b/target/riscv/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/machine.c +++ b/target/riscv/machine.c @@ -XXX,XX +XXX,XX @@ static int pmp_post_load(void *opaque, int version_id) RISCVCPU *cpu = opaque; CPURISCVState *env = &cpu->env; int i; + uint8_t pmp_regions = riscv_cpu_cfg(env)->pmp_regions; - for (i = 0; i < MAX_RISCV_PMPS; i++) { + for (i = 0; i < pmp_regions; i++) { pmp_update_rule_addr(env, i); } pmp_update_rule_nums(env); diff --git a/target/riscv/pmp.c b/target/riscv/pmp.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/pmp.c +++ b/target/riscv/pmp.c @@ -XXX,XX +XXX,XX @@ uint32_t pmp_get_num_rules(CPURISCVState *env) */ static inline uint8_t pmp_read_cfg(CPURISCVState *env, uint32_t pmp_index) { - if (pmp_index < MAX_RISCV_PMPS) { + uint8_t pmp_regions = riscv_cpu_cfg(env)->pmp_regions; + + if (pmp_index < pmp_regions) { return env->pmp_state.pmp[pmp_index].cfg_reg; } @@ -XXX,XX +XXX,XX @@ static inline uint8_t pmp_read_cfg(CPURISCVState *env, uint32_t pmp_index) */ static bool pmp_write_cfg(CPURISCVState *env, uint32_t pmp_index, uint8_t val) { - if (pmp_index < MAX_RISCV_PMPS) { + uint8_t pmp_regions = riscv_cpu_cfg(env)->pmp_regions; + + if (pmp_index < pmp_regions) { if (env->pmp_state.pmp[pmp_index].cfg_reg == val) { /* no change */ return false; @@ -XXX,XX +XXX,XX @@ void pmp_update_rule_addr(CPURISCVState *env, uint32_t pmp_index) void pmp_update_rule_nums(CPURISCVState *env) { int i; + uint8_t pmp_regions = riscv_cpu_cfg(env)->pmp_regions; env->pmp_state.num_rules = 0; - for (i = 0; i < MAX_RISCV_PMPS; i++) { + for (i = 0; i < pmp_regions; i++) { const uint8_t a_field = pmp_get_a_field(env->pmp_state.pmp[i].cfg_reg); if (PMP_AMATCH_OFF != a_field) { @@ -XXX,XX +XXX,XX @@ bool pmp_hart_has_privs(CPURISCVState *env, hwaddr addr, int pmp_size = 0; hwaddr s = 0; hwaddr e = 0; + uint8_t pmp_regions = riscv_cpu_cfg(env)->pmp_regions; /* Short cut if no rules */ if (0 == pmp_get_num_rules(env)) { @@ -XXX,XX +XXX,XX @@ bool pmp_hart_has_privs(CPURISCVState *env, hwaddr addr, * 1.10 draft priv spec states there is an implicit order * from low to high */ - for (i = 0; i < MAX_RISCV_PMPS; i++) { + for (i = 0; i < pmp_regions; i++) { s = pmp_is_in_range(env, i, addr); e = pmp_is_in_range(env, i, addr + pmp_size - 1); @@ -XXX,XX +XXX,XX @@ void pmpaddr_csr_write(CPURISCVState *env, uint32_t addr_index, { trace_pmpaddr_csr_write(env->mhartid, addr_index, val); bool is_next_cfg_tor = false; + uint8_t pmp_regions = riscv_cpu_cfg(env)->pmp_regions; - if (addr_index < MAX_RISCV_PMPS) { + if (addr_index < pmp_regions) { if (env->pmp_state.pmp[addr_index].addr_reg == val) { /* no change */ return; @@ -XXX,XX +XXX,XX @@ void pmpaddr_csr_write(CPURISCVState *env, uint32_t addr_index, * In TOR mode, need to check the lock bit of the next pmp * (if there is a next). */ - if (addr_index + 1 < MAX_RISCV_PMPS) { + if (addr_index + 1 < pmp_regions) { uint8_t pmp_cfg = env->pmp_state.pmp[addr_index + 1].cfg_reg; is_next_cfg_tor = PMP_AMATCH_TOR == pmp_get_a_field(pmp_cfg); @@ -XXX,XX +XXX,XX @@ void pmpaddr_csr_write(CPURISCVState *env, uint32_t addr_index, target_ulong pmpaddr_csr_read(CPURISCVState *env, uint32_t addr_index) { target_ulong val = 0; + uint8_t pmp_regions = riscv_cpu_cfg(env)->pmp_regions; - if (addr_index < MAX_RISCV_PMPS) { + if (addr_index < pmp_regions) { val = env->pmp_state.pmp[addr_index].addr_reg; trace_pmpaddr_csr_read(env->mhartid, addr_index, val); } else { @@ -XXX,XX +XXX,XX @@ void mseccfg_csr_write(CPURISCVState *env, target_ulong val) { int i; uint64_t mask = MSECCFG_MMWP | MSECCFG_MML; + uint8_t pmp_regions = riscv_cpu_cfg(env)->pmp_regions; /* Update PMM field only if the value is valid according to Zjpm v1.0 */ if (riscv_cpu_cfg(env)->ext_smmpm && riscv_cpu_mxl(env) == MXL_RV64 && @@ -XXX,XX +XXX,XX @@ void mseccfg_csr_write(CPURISCVState *env, target_ulong val) /* RLB cannot be enabled if it's already 0 and if any regions are locked */ if (!MSECCFG_RLB_ISSET(env)) { - for (i = 0; i < MAX_RISCV_PMPS; i++) { + for (i = 0; i < pmp_regions; i++) { if (pmp_is_locked(env, i)) { val &= ~MSECCFG_RLB; break; @@ -XXX,XX +XXX,XX @@ target_ulong pmp_get_tlb_size(CPURISCVState *env, hwaddr addr) hwaddr tlb_sa = addr & ~(TARGET_PAGE_SIZE - 1); hwaddr tlb_ea = tlb_sa + TARGET_PAGE_SIZE - 1; int i; + uint8_t pmp_regions = riscv_cpu_cfg(env)->pmp_regions; /* * If PMP is not supported or there are no PMP rules, the TLB page will not @@ -XXX,XX +XXX,XX @@ target_ulong pmp_get_tlb_size(CPURISCVState *env, hwaddr addr) return TARGET_PAGE_SIZE; } - for (i = 0; i < MAX_RISCV_PMPS; i++) { + for (i = 0; i < pmp_regions; i++) { if (pmp_get_a_field(env->pmp_state.pmp[i].cfg_reg) == PMP_AMATCH_OFF) { continue; } -- 2.50.0 From: Nutty Liu <liujingqi@lanxincomputing.com> The original implementation incorrectly performed a bitwise AND operation between the PPN of iova and PPN Mask, leading to an incorrect PPN field in Translation-reponse register. The PPN of iova should be set entirely in the PPN field of Translation-reponse register. Also remove the code that was used to clear S field since this field is already zero. Signed-off-by: Nutty Liu <liujingqi@lanxincomputing.com> Reviewed-by: Tomasz Jeznach <tjeznach@rivosinc.com> Message-ID: <20250605124848.1248-1-liujingqi@lanxincomputing.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/hw/riscv/riscv-iommu.c b/hw/riscv/riscv-iommu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.c +++ b/hw/riscv/riscv-iommu.c @@ -XXX,XX +XXX,XX @@ static void riscv_iommu_process_dbg(RISCVIOMMUState *s) iova = RISCV_IOMMU_TR_RESPONSE_FAULT | (((uint64_t) fault) << 10); } else { iova = iotlb.translated_addr & ~iotlb.addr_mask; - iova >>= TARGET_PAGE_BITS; - iova &= RISCV_IOMMU_TR_RESPONSE_PPN; - - /* We do not support superpages (> 4kbs) for now */ - iova &= ~RISCV_IOMMU_TR_RESPONSE_S; + iova = set_field(0, RISCV_IOMMU_TR_RESPONSE_PPN, PPN_DOWN(iova)); } riscv_iommu_reg_set64(s, RISCV_IOMMU_REG_TR_RESPONSE, iova); } -- 2.50.0 From: Daniel Henrique Barboza <dbarboza@ventanamicro.com> The SBI spec states, for console write byte: "This is a blocking SBI call and it will only return after writing the specified byte to the debug console. It will also return, with SBI_ERR_FAILED, if there are I/O errors." Being a blocker call will either succeed writing the byte or error out, it's feasible to use the blocking qemu_chr_fe_write_all() instead of qemu_chr_fe_write(). Last but not the least, we will duck possible changes in qemu_chr_fe_write() where ret = 0 will have a 'zero byte written' semantic [1] - something that we're not ready to deal in this current state. [1] https://lore.kernel.org/qemu-devel/CAFEAcA_kEndvNtw4EHySXWwQPoGs029yAzZGGBcV=zGHaj7KUQ@mail.gmail.com/ Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20250605094456.1385105-2-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/kvm/kvm-cpu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/riscv/kvm/kvm-cpu.c b/target/riscv/kvm/kvm-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/kvm/kvm-cpu.c +++ b/target/riscv/kvm/kvm-cpu.c @@ -XXX,XX +XXX,XX @@ static void kvm_riscv_handle_sbi_dbcn(CPUState *cs, struct kvm_run *run) break; case SBI_EXT_DBCN_CONSOLE_WRITE_BYTE: ch = run->riscv_sbi.args[0]; - ret = qemu_chr_fe_write(serial_hd(0)->be, &ch, sizeof(ch)); + ret = qemu_chr_fe_write_all(serial_hd(0)->be, &ch, sizeof(ch)); if (ret < 0) { error_report("SBI_EXT_DBCN_CONSOLE_WRITE_BYTE: error when " -- 2.50.0 From: Anton Blanchard <antonb@tenstorrent.com> fcvt.s.bf16 uses the FP16 check_nanbox_h() which returns an FP16 quiet NaN. Add check_nanbox_bf16() which returns a BF16 quiet NaN. Signed-off-by: Anton Blanchard <antonb@tenstorrent.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250501114253.594887-1-antonb@tenstorrent.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/internals.h | 16 ++++++++++++++++ target/riscv/fpu_helper.c | 2 +- 2 files changed, 17 insertions(+), 1 deletion(-) diff --git a/target/riscv/internals.h b/target/riscv/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/internals.h +++ b/target/riscv/internals.h @@ -XXX,XX +XXX,XX @@ static inline float16 check_nanbox_h(CPURISCVState *env, uint64_t f) } } +static inline float16 check_nanbox_bf16(CPURISCVState *env, uint64_t f) +{ + /* Disable nanbox check when enable zfinx */ + if (env_archcpu(env)->cfg.ext_zfinx) { + return (uint16_t)f; + } + + uint64_t mask = MAKE_64BIT_MASK(16, 48); + + if (likely((f & mask) == mask)) { + return (uint16_t)f; + } else { + return 0x7FC0u; /* default qnan */ + } +} + #ifndef CONFIG_USER_ONLY /* Our implementation of SysemuCPUOps::has_work */ bool riscv_cpu_has_work(CPUState *cs); diff --git a/target/riscv/fpu_helper.c b/target/riscv/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/fpu_helper.c +++ b/target/riscv/fpu_helper.c @@ -XXX,XX +XXX,XX @@ uint64_t helper_fcvt_bf16_s(CPURISCVState *env, uint64_t rs1) uint64_t helper_fcvt_s_bf16(CPURISCVState *env, uint64_t rs1) { - float16 frs1 = check_nanbox_h(env, rs1); + float16 frs1 = check_nanbox_bf16(env, rs1); return nanbox_s(env, bfloat16_to_float32(frs1, &env->fp_status)); } -- 2.50.0 From: Florian Lugou <florian.lugou@provenrun.com> The current handler for TXFIFO writes schedules an async callback to pop characters from the queue. When software writes to TXFIFO faster than the async callback delay (100ns), the timer may be pushed back while the previous character has not be dequeued yet. This happens in particular when using -icount with small shift values. This is especially worrysome when software repetitively issues amoor.w instructions (as suggested by SiFive specification) and the FIFO is full, leading to the callback being infinitly pushed back. This commit fixes the issue by never pushing back the timer, only updating it if it is not already active. Signed-off-by: Florian Lugou <florian.lugou@provenrun.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250605101255.797162-1-florian.lugou@provenrun.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/char/sifive_uart.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/hw/char/sifive_uart.c b/hw/char/sifive_uart.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/sifive_uart.c +++ b/hw/char/sifive_uart.c @@ -XXX,XX +XXX,XX @@ static void sifive_uart_write_tx_fifo(SiFiveUARTState *s, const uint8_t *buf, s->txfifo |= SIFIVE_UART_TXFIFO_FULL; } - timer_mod(s->fifo_trigger_handle, current_time + - TX_INTERRUPT_TRIGGER_DELAY_NS); + if (!timer_pending(s->fifo_trigger_handle)) { + timer_mod(s->fifo_trigger_handle, current_time + + TX_INTERRUPT_TRIGGER_DELAY_NS); + } } static uint64_t -- 2.50.0 From: Joel Stanley <joel@jms.id.au> The address is a hardware address, so use hwaddr for consistency with the rest of the machine. Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-ID: <20250604025450.85327-2-joel@jms.id.au> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_socket_clint(RISCVVirtState *s, int cpu; g_autofree char *clint_name = NULL; g_autofree uint32_t *clint_cells = NULL; - unsigned long clint_addr; + hwaddr clint_addr; MachineState *ms = MACHINE(s); static const char * const clint_compat[2] = { "sifive,clint0", "riscv,clint0" @@ -XXX,XX +XXX,XX @@ static void create_fdt_socket_clint(RISCVVirtState *s, } clint_addr = s->memmap[VIRT_CLINT].base + - (s->memmap[VIRT_CLINT].size * socket); - clint_name = g_strdup_printf("/soc/clint@%lx", clint_addr); + s->memmap[VIRT_CLINT].size * socket; + clint_name = g_strdup_printf("/soc/clint@%"HWADDR_PRIx, clint_addr); qemu_fdt_add_subnode(ms->fdt, clint_name); qemu_fdt_setprop_string_array(ms->fdt, clint_name, "compatible", (char **)&clint_compat, -- 2.50.0 From: Joel Stanley <joel@jms.id.au> The current device tree property uses two cells for the address (and for the size), but assumes the they are less than 32 bits by hard coding the high cell to zero. Use qemu_fdt_setprop_sized_cells to do the job of splitting the upper and lower 32 bits across cells. Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-ID: <20250604025450.85327-3-joel@jms.id.au> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_socket_clint(RISCVVirtState *s, qemu_fdt_setprop_string_array(ms->fdt, clint_name, "compatible", (char **)&clint_compat, ARRAY_SIZE(clint_compat)); - qemu_fdt_setprop_cells(ms->fdt, clint_name, "reg", - 0x0, clint_addr, 0x0, s->memmap[VIRT_CLINT].size); + qemu_fdt_setprop_sized_cells(ms->fdt, clint_name, "reg", + 2, clint_addr, 2, s->memmap[VIRT_CLINT].size); qemu_fdt_setprop(ms->fdt, clint_name, "interrupts-extended", clint_cells, s->soc[socket].num_harts * sizeof(uint32_t) * 4); riscv_socket_fdt_write_id(ms, clint_name, socket); -- 2.50.0 From: Joel Stanley <joel@jms.id.au> Use qemu_fdt_setprop_sized_cells to do the job of splitting the upper and lower 32 bits across cells. Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-ID: <20250604025450.85327-4-joel@jms.id.au> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_socket_memory(RISCVVirtState *s, int socket) size = riscv_socket_mem_size(ms, socket); mem_name = g_strdup_printf("/memory@%"HWADDR_PRIx, addr); qemu_fdt_add_subnode(ms->fdt, mem_name); - qemu_fdt_setprop_cells(ms->fdt, mem_name, "reg", - addr >> 32, addr, size >> 32, size); + qemu_fdt_setprop_sized_cells(ms->fdt, mem_name, "reg", 2, addr, 2, size); qemu_fdt_setprop_string(ms->fdt, mem_name, "device_type", "memory"); riscv_socket_fdt_write_id(ms, mem_name, socket); } -- 2.50.0 From: Joel Stanley <joel@jms.id.au> The current device tree property uses two cells for the address (and for the size), but assumes the they are less than 32 bits by hard coding the high cell to zero. Use qemu_fdt_setprop_sized_cells to do the job of splitting the upper and lower 32 bits across cells. Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-ID: <20250604025450.85327-5-joel@jms.id.au> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_one_aplic(RISCVVirtState *s, int socket, qemu_fdt_setprop_cell(ms->fdt, aplic_name, "msi-parent", msi_phandle); } - qemu_fdt_setprop_cells(ms->fdt, aplic_name, "reg", - 0x0, aplic_addr, 0x0, aplic_size); + qemu_fdt_setprop_sized_cells(ms->fdt, aplic_name, "reg", + 2, aplic_addr, 2, aplic_size); qemu_fdt_setprop_cell(ms->fdt, aplic_name, "riscv,num-sources", VIRT_IRQCHIP_NUM_SOURCES); -- 2.50.0 From: Joel Stanley <joel@jms.id.au> The current device tree property uses two cells for the address (and for the size), but assumes the they are less than 32 bits by hard coding the high cell to zero. Use qemu_fdt_setprop_sized_cells to do the job of splitting the upper and lower 32 bits across cells. Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-ID: <20250604025450.85327-6-joel@jms.id.au> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_socket_aclint(RISCVVirtState *s, qemu_fdt_add_subnode(ms->fdt, name); qemu_fdt_setprop_string(ms->fdt, name, "compatible", "riscv,aclint-mswi"); - qemu_fdt_setprop_cells(ms->fdt, name, "reg", - 0x0, addr, 0x0, RISCV_ACLINT_SWI_SIZE); + qemu_fdt_setprop_sized_cells(ms->fdt, name, "reg", + 2, addr, 2, RISCV_ACLINT_SWI_SIZE); qemu_fdt_setprop(ms->fdt, name, "interrupts-extended", aclint_mswi_cells, aclint_cells_size); qemu_fdt_setprop(ms->fdt, name, "interrupt-controller", NULL, 0); @@ -XXX,XX +XXX,XX @@ static void create_fdt_socket_aclint(RISCVVirtState *s, qemu_fdt_add_subnode(ms->fdt, name); qemu_fdt_setprop_string(ms->fdt, name, "compatible", "riscv,aclint-mtimer"); - qemu_fdt_setprop_cells(ms->fdt, name, "reg", - 0x0, addr + RISCV_ACLINT_DEFAULT_MTIME, - 0x0, size - RISCV_ACLINT_DEFAULT_MTIME, - 0x0, addr + RISCV_ACLINT_DEFAULT_MTIMECMP, - 0x0, RISCV_ACLINT_DEFAULT_MTIME); + qemu_fdt_setprop_sized_cells(ms->fdt, name, "reg", + 2, addr + RISCV_ACLINT_DEFAULT_MTIME, + 2, size - RISCV_ACLINT_DEFAULT_MTIME, + 2, addr + RISCV_ACLINT_DEFAULT_MTIMECMP, + 2, RISCV_ACLINT_DEFAULT_MTIME); qemu_fdt_setprop(ms->fdt, name, "interrupts-extended", aclint_mtimer_cells, aclint_cells_size); riscv_socket_fdt_write_id(ms, name, socket); @@ -XXX,XX +XXX,XX @@ static void create_fdt_socket_aclint(RISCVVirtState *s, qemu_fdt_add_subnode(ms->fdt, name); qemu_fdt_setprop_string(ms->fdt, name, "compatible", "riscv,aclint-sswi"); - qemu_fdt_setprop_cells(ms->fdt, name, "reg", - 0x0, addr, 0x0, s->memmap[VIRT_ACLINT_SSWI].size); + qemu_fdt_setprop_sized_cells(ms->fdt, name, "reg", + 2, addr, 2, s->memmap[VIRT_ACLINT_SSWI].size); qemu_fdt_setprop(ms->fdt, name, "interrupts-extended", aclint_sswi_cells, aclint_cells_size); qemu_fdt_setprop(ms->fdt, name, "interrupt-controller", NULL, 0); -- 2.50.0 From: Joel Stanley <joel@jms.id.au> The current device tree property uses two cells for the address (and for the size), but assumes the they are less than 32 bits by hard coding the high cell to zero. Use qemu_fdt_setprop_sized_cells to do the job of splitting the upper and lower 32 bits across cells. Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-ID: <20250604025450.85327-7-joel@jms.id.au> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_socket_plic(RISCVVirtState *s, s->soc[socket].num_harts * sizeof(uint32_t) * 4); } - qemu_fdt_setprop_cells(ms->fdt, plic_name, "reg", - 0x0, plic_addr, 0x0, s->memmap[VIRT_PLIC].size); + qemu_fdt_setprop_sized_cells(ms->fdt, plic_name, "reg", + 2, plic_addr, 2, s->memmap[VIRT_PLIC].size); qemu_fdt_setprop_cell(ms->fdt, plic_name, "riscv,ndev", VIRT_IRQCHIP_NUM_SOURCES - 1); riscv_socket_fdt_write_id(ms, plic_name, socket); -- 2.50.0 From: Joel Stanley <joel@jms.id.au> The current device tree property uses two cells for the address (and for the size), but assumes the they are less than 32 bits by hard coding the high cell to zero. Use qemu_fdt_setprop_sized_cells to do the job of splitting the upper and lower 32 bits across cells. Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-ID: <20250604025450.85327-8-joel@jms.id.au> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_virtio(RISCVVirtState *s, uint32_t irq_virtio_phandle) qemu_fdt_add_subnode(ms->fdt, name); qemu_fdt_setprop_string(ms->fdt, name, "compatible", "virtio,mmio"); - qemu_fdt_setprop_cells(ms->fdt, name, "reg", - 0x0, addr, - 0x0, size); + qemu_fdt_setprop_sized_cells(ms->fdt, name, "reg", 2, addr, 2, size); qemu_fdt_setprop_cell(ms->fdt, name, "interrupt-parent", irq_virtio_phandle); if (s->aia_type == VIRT_AIA_TYPE_NONE) { -- 2.50.0 From: Joel Stanley <joel@jms.id.au> The current device tree property uses two cells for the address (and for the size), but assumes the they are less than 32 bits by hard coding the high cell to zero. Use qemu_fdt_setprop_sized_cells to do the job of splitting the upper and lower 32 bits across cells. Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-ID: <20250604025450.85327-9-joel@jms.id.au> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_reset(RISCVVirtState *s, uint32_t *phandle) qemu_fdt_setprop_string_array(ms->fdt, name, "compatible", (char **)&compat, ARRAY_SIZE(compat)); } - qemu_fdt_setprop_cells(ms->fdt, name, "reg", - 0x0, s->memmap[VIRT_TEST].base, 0x0, s->memmap[VIRT_TEST].size); + qemu_fdt_setprop_sized_cells(ms->fdt, name, "reg", + 2, s->memmap[VIRT_TEST].base, + 2, s->memmap[VIRT_TEST].size); qemu_fdt_setprop_cell(ms->fdt, name, "phandle", test_phandle); test_phandle = qemu_fdt_get_phandle(ms->fdt, name); g_free(name); -- 2.50.0 From: Joel Stanley <joel@jms.id.au> The current device tree property uses two cells for the address (and for the size), but assumes the they are less than 32 bits by hard coding the high cell to zero. Use qemu_fdt_setprop_sized_cells to do the job of splitting the upper and lower 32 bits across cells. Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-ID: <20250604025450.85327-10-joel@jms.id.au> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_uart(RISCVVirtState *s, s->memmap[VIRT_UART0].base); qemu_fdt_add_subnode(ms->fdt, name); qemu_fdt_setprop_string(ms->fdt, name, "compatible", "ns16550a"); - qemu_fdt_setprop_cells(ms->fdt, name, "reg", - 0x0, s->memmap[VIRT_UART0].base, - 0x0, s->memmap[VIRT_UART0].size); + qemu_fdt_setprop_sized_cells(ms->fdt, name, "reg", + 2, s->memmap[VIRT_UART0].base, + 2, s->memmap[VIRT_UART0].size); qemu_fdt_setprop_cell(ms->fdt, name, "clock-frequency", 3686400); qemu_fdt_setprop_cell(ms->fdt, name, "interrupt-parent", irq_mmio_phandle); if (s->aia_type == VIRT_AIA_TYPE_NONE) { -- 2.50.0 From: Joel Stanley <joel@jms.id.au> The current device tree property uses two cells for the address (and for the size), but assumes the they are less than 32 bits by hard coding the high cell to zero. Use qemu_fdt_setprop_sized_cells to do the job of splitting the upper and lower 32 bits across cells. Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-ID: <20250604025450.85327-11-joel@jms.id.au> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_rtc(RISCVVirtState *s, qemu_fdt_add_subnode(ms->fdt, name); qemu_fdt_setprop_string(ms->fdt, name, "compatible", "google,goldfish-rtc"); - qemu_fdt_setprop_cells(ms->fdt, name, "reg", - 0x0, s->memmap[VIRT_RTC].base, 0x0, s->memmap[VIRT_RTC].size); + qemu_fdt_setprop_sized_cells(ms->fdt, name, "reg", + 2, s->memmap[VIRT_RTC].base, + 2, s->memmap[VIRT_RTC].size); qemu_fdt_setprop_cell(ms->fdt, name, "interrupt-parent", irq_mmio_phandle); if (s->aia_type == VIRT_AIA_TYPE_NONE) { -- 2.50.0 From: Joel Stanley <joel@jms.id.au> The current device tree property uses two cells for the address (and for the size), but assumes the they are less than 32 bits by hard coding the high cell to zero. Use qemu_fdt_setprop_sized_cells to do the job of splitting the upper and lower 32 bits across cells. Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-ID: <20250604025450.85327-12-joel@jms.id.au> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_iommu_sys(RISCVVirtState *s, uint32_t irq_chip, qemu_fdt_setprop_cell(fdt, iommu_node, "#iommu-cells", 1); qemu_fdt_setprop_cell(fdt, iommu_node, "phandle", iommu_phandle); - qemu_fdt_setprop_cells(fdt, iommu_node, "reg", - addr >> 32, addr, size >> 32, size); + qemu_fdt_setprop_sized_cells(fdt, iommu_node, "reg", 2, addr, 2, size); qemu_fdt_setprop_cell(fdt, iommu_node, "interrupt-parent", irq_chip); qemu_fdt_setprop_cells(fdt, iommu_node, "interrupts", -- 2.50.0 From: Joel Stanley <joel@jms.id.au> The current device tree property uses two cells for the address (and for the size), but assumes the they are less than 32 bits by hard coding the high cell to zero. Use qemu_fdt_setprop_sized_cells to do the job of splitting the upper and lower 32 bits across cells. Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-ID: <20250604025450.85327-13-joel@jms.id.au> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_pcie(RISCVVirtState *s, if (s->aia_type == VIRT_AIA_TYPE_APLIC_IMSIC) { qemu_fdt_setprop_cell(ms->fdt, name, "msi-parent", msi_pcie_phandle); } - qemu_fdt_setprop_cells(ms->fdt, name, "reg", 0, - s->memmap[VIRT_PCIE_ECAM].base, 0, s->memmap[VIRT_PCIE_ECAM].size); + qemu_fdt_setprop_sized_cells(ms->fdt, name, "reg", 2, + s->memmap[VIRT_PCIE_ECAM].base, 2, s->memmap[VIRT_PCIE_ECAM].size); qemu_fdt_setprop_sized_cells(ms->fdt, name, "ranges", 1, FDT_PCI_RANGE_IOPORT, 2, 0, 2, s->memmap[VIRT_PCIE_PIO].base, 2, s->memmap[VIRT_PCIE_PIO].size, -- 2.50.0 From: Huang Borong <3543977024@qq.com> Add a CPU entry for the Xiangshan Kunminghu CPU, an open-source, high-performance RISC-V processor. More details can be found at: https://github.com/OpenXiangShan/XiangShan Note: The ISA extensions supported by the Xiangshan Kunminghu CPU are categorized based on four RISC-V specifications: Volume I: Unprivileged Architecture, Volume II: Privileged Architecture, AIA, and RVA23. The extensions within each category are organized according to the chapter order in the specifications. Signed-off-by: Yu Hu <huyu@bosc.ac.cn> Signed-off-by: Ran Wang <wangran@bosc.ac.cn> Signed-off-by: Borong Huang <3543977024@qq.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250425122212.364-1-wangran@bosc.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu-qom.h | 1 + target/riscv/cpu.c | 58 ++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 59 insertions(+) diff --git a/target/riscv/cpu-qom.h b/target/riscv/cpu-qom.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu-qom.h +++ b/target/riscv/cpu-qom.h @@ -XXX,XX +XXX,XX @@ #define TYPE_RISCV_CPU_VEYRON_V1 RISCV_CPU_TYPE_NAME("veyron-v1") #define TYPE_RISCV_CPU_TT_ASCALON RISCV_CPU_TYPE_NAME("tt-ascalon") #define TYPE_RISCV_CPU_XIANGSHAN_NANHU RISCV_CPU_TYPE_NAME("xiangshan-nanhu") +#define TYPE_RISCV_CPU_XIANGSHAN_KMH RISCV_CPU_TYPE_NAME("xiangshan-kunminghu") #define TYPE_RISCV_CPU_HOST RISCV_CPU_TYPE_NAME("host") OBJECT_DECLARE_CPU_TYPE(RISCVCPU, RISCVCPUClass, RISCV_CPU) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static const TypeInfo riscv_cpu_type_infos[] = { .cfg.max_satp_mode = VM_1_10_SV39, ), + DEFINE_RISCV_CPU(TYPE_RISCV_CPU_XIANGSHAN_KMH, TYPE_RISCV_VENDOR_CPU, + .misa_mxl_max = MXL_RV64, + .misa_ext = RVG | RVC | RVB | RVS | RVU | RVH | RVV, + .priv_spec = PRIV_VERSION_1_13_0, + /* + * The RISC-V Instruction Set Manual: Volume I + * Unprivileged Architecture + */ + .cfg.ext_zicntr = true, + .cfg.ext_zihpm = true, + .cfg.ext_zihintntl = true, + .cfg.ext_zihintpause = true, + .cfg.ext_zimop = true, + .cfg.ext_zcmop = true, + .cfg.ext_zicond = true, + .cfg.ext_zawrs = true, + .cfg.ext_zacas = true, + .cfg.ext_zfh = true, + .cfg.ext_zfa = true, + .cfg.ext_zcb = true, + .cfg.ext_zbc = true, + .cfg.ext_zvfh = true, + .cfg.ext_zkn = true, + .cfg.ext_zks = true, + .cfg.ext_zkt = true, + .cfg.ext_zvbb = true, + .cfg.ext_zvkt = true, + /* + * The RISC-V Instruction Set Manual: Volume II + * Privileged Architecture + */ + .cfg.ext_smstateen = true, + .cfg.ext_smcsrind = true, + .cfg.ext_sscsrind = true, + .cfg.ext_svnapot = true, + .cfg.ext_svpbmt = true, + .cfg.ext_svinval = true, + .cfg.ext_sstc = true, + .cfg.ext_sscofpmf = true, + .cfg.ext_ssdbltrp = true, + .cfg.ext_ssnpm = true, + .cfg.ext_smnpm = true, + .cfg.ext_smmpm = true, + .cfg.ext_sspm = true, + .cfg.ext_supm = true, + /* The RISC-V Advanced Interrupt Architecture */ + .cfg.ext_smaia = true, + .cfg.ext_ssaia = true, + /* RVA23 Profiles */ + .cfg.ext_zicbom = true, + .cfg.ext_zicbop = true, + .cfg.ext_zicboz = true, + .cfg.ext_svade = true, + .cfg.mmu = true, + .cfg.pmp = true, + .cfg.max_satp_mode = VM_1_10_SV48, + ), + #if defined(CONFIG_TCG) && !defined(CONFIG_USER_ONLY) DEFINE_RISCV_CPU(TYPE_RISCV_CPU_BASE128, TYPE_RISCV_DYNAMIC_CPU, .cfg.max_satp_mode = VM_1_10_SV57, -- 2.50.0 From: Huang Borong <3543977024@qq.com> This implementation provides emulation for the Xiangshan Kunminghu FPGA prototype platform, including support for UART, CLINT, IMSIC, and APLIC devices. More details can be found at https://github.com/OpenXiangShan/XiangShan Signed-off-by: qinshaoqing <qinshaoqing@bosc.ac.cn> Signed-off-by: Yang Wang <wangyang@bosc.ac.cn> Signed-off-by: Yu Hu <819258943@qq.com> Signed-off-by: Ran Wang <wangran@bosc.ac.cn> Signed-off-by: Borong Huang <3543977024@qq.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20250617074222.17618-1-wangran@bosc.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- MAINTAINERS | 7 + docs/system/riscv/xiangshan-kunminghu.rst | 39 ++++ docs/system/target-riscv.rst | 1 + configs/devices/riscv64-softmmu/default.mak | 1 + include/hw/riscv/xiangshan_kmh.h | 68 ++++++ hw/riscv/xiangshan_kmh.c | 220 ++++++++++++++++++++ hw/riscv/Kconfig | 9 + hw/riscv/meson.build | 1 + 8 files changed, 346 insertions(+) create mode 100644 docs/system/riscv/xiangshan-kunminghu.rst create mode 100644 include/hw/riscv/xiangshan_kmh.h create mode 100644 hw/riscv/xiangshan_kmh.c diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ S: Maintained F: hw/riscv/microblaze-v-generic.c F: docs/system/riscv/microblaze-v-generic.rst +Xiangshan Kunminghu +M: Ran Wang <wangran@bosc.ac.cn> +S: Maintained +F: docs/system/riscv/xiangshan-kunminghu.rst +F: hw/riscv/xiangshan_kmh.c +F: include/hw/riscv/xiangshan_kmh.h + RX Machines ----------- rx-gdbsim diff --git a/docs/system/riscv/xiangshan-kunminghu.rst b/docs/system/riscv/xiangshan-kunminghu.rst new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/docs/system/riscv/xiangshan-kunminghu.rst @@ -XXX,XX +XXX,XX @@ +BOSC Xiangshan Kunminghu FPGA prototype platform (``xiangshan-kunminghu``) +========================================================================== +The ``xiangshan-kunminghu`` machine is compatible with our FPGA prototype +platform. + +XiangShan is an open-source high-performance RISC-V processor project. +The third generation processor is called Kunminghu. Kunminghu is a 64-bit +RV64GCBSUHV processor core. More information can be found in our Github +repository: +https://github.com/OpenXiangShan/XiangShan + +Supported devices +----------------- +The ``xiangshan-kunminghu`` machine supports the following devices: + +* Up to 16 xiangshan-kunminghu cores +* Core Local Interruptor (CLINT) +* Incoming MSI Controller (IMSIC) +* Advanced Platform-Level Interrupt Controller (APLIC) +* 1 UART + +Boot options +------------ +The ``xiangshan-kunminghu`` machine can start using the standard ``-bios`` +functionality for loading the boot image. You need to compile and link +the firmware, kernel, and Device Tree (FDT) into a single binary file, +such as ``fw_payload.bin``. + +Running +------- +Below is an example command line for running the ``xiangshan-kunminghu`` +machine: + +.. code-block:: bash + + $ qemu-system-riscv64 -machine xiangshan-kunminghu \ + -smp 16 -m 16G \ + -bios path/to/opensbi/platform/generic/firmware/fw_payload.bin \ + -nographic diff --git a/docs/system/target-riscv.rst b/docs/system/target-riscv.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/target-riscv.rst +++ b/docs/system/target-riscv.rst @@ -XXX,XX +XXX,XX @@ undocumented; you can get a complete list by running riscv/shakti-c riscv/sifive_u riscv/virt + riscv/xiangshan-kunminghu RISC-V CPU firmware ------------------- diff --git a/configs/devices/riscv64-softmmu/default.mak b/configs/devices/riscv64-softmmu/default.mak index XXXXXXX..XXXXXXX 100644 --- a/configs/devices/riscv64-softmmu/default.mak +++ b/configs/devices/riscv64-softmmu/default.mak @@ -XXX,XX +XXX,XX @@ # CONFIG_RISCV_VIRT=n # CONFIG_MICROCHIP_PFSOC=n # CONFIG_SHAKTI_C=n +# CONFIG_XIANGSHAN_KUNMINGHU=n diff --git a/include/hw/riscv/xiangshan_kmh.h b/include/hw/riscv/xiangshan_kmh.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/riscv/xiangshan_kmh.h @@ -XXX,XX +XXX,XX @@ +/* SPDX-License-Identifier: BSD-2-Clause */ +/* + * QEMU RISC-V Board Compatible with the Xiangshan Kunminghu + * FPGA prototype platform + * + * Copyright (c) 2025 Beijing Institute of Open Source Chip (BOSC) + * + */ + +#ifndef HW_XIANGSHAN_KMH_H +#define HW_XIANGSHAN_KMH_H + +#include "hw/boards.h" +#include "hw/riscv/riscv_hart.h" + +#define XIANGSHAN_KMH_MAX_CPUS 16 + +typedef struct XiangshanKmhSoCState { + /*< private >*/ + DeviceState parent_obj; + + /*< public >*/ + RISCVHartArrayState cpus; + DeviceState *irqchip; + MemoryRegion rom; +} XiangshanKmhSoCState; + +#define TYPE_XIANGSHAN_KMH_SOC "xiangshan.kunminghu.soc" +DECLARE_INSTANCE_CHECKER(XiangshanKmhSoCState, XIANGSHAN_KMH_SOC, + TYPE_XIANGSHAN_KMH_SOC) + +typedef struct XiangshanKmhState { + /*< private >*/ + MachineState parent_obj; + + /*< public >*/ + XiangshanKmhSoCState soc; +} XiangshanKmhState; + +#define TYPE_XIANGSHAN_KMH_MACHINE MACHINE_TYPE_NAME("xiangshan-kunminghu") +DECLARE_INSTANCE_CHECKER(XiangshanKmhState, XIANGSHAN_KMH_MACHINE, + TYPE_XIANGSHAN_KMH_MACHINE) + +enum { + XIANGSHAN_KMH_ROM, + XIANGSHAN_KMH_UART0, + XIANGSHAN_KMH_CLINT, + XIANGSHAN_KMH_APLIC_M, + XIANGSHAN_KMH_APLIC_S, + XIANGSHAN_KMH_IMSIC_M, + XIANGSHAN_KMH_IMSIC_S, + XIANGSHAN_KMH_DRAM, +}; + +enum { + XIANGSHAN_KMH_UART0_IRQ = 10, +}; + +/* Indicating Timebase-freq (1MHZ) */ +#define XIANGSHAN_KMH_CLINT_TIMEBASE_FREQ 1000000 + +#define XIANGSHAN_KMH_IMSIC_NUM_IDS 255 +#define XIANGSHAN_KMH_IMSIC_NUM_GUESTS 7 +#define XIANGSHAN_KMH_IMSIC_GUEST_BITS 3 + +#define XIANGSHAN_KMH_APLIC_NUM_SOURCES 96 + +#endif diff --git a/hw/riscv/xiangshan_kmh.c b/hw/riscv/xiangshan_kmh.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/riscv/xiangshan_kmh.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU RISC-V Board Compatible with the Xiangshan Kunminghu + * FPGA prototype platform + * + * Copyright (c) 2025 Beijing Institute of Open Source Chip (BOSC) + * SPDX-License-Identifier: GPL-2.0-or-later + * + * Provides a board compatible with the Xiangshan Kunminghu + * FPGA prototype platform: + * + * 0) UART (16550A) + * 1) CLINT (Core-Local Interruptor) + * 2) IMSIC (Incoming MSI Controller) + * 3) APLIC (Advanced Platform-Level Interrupt Controller) + * + * More information can be found in our Github repository: + * https://github.com/OpenXiangShan/XiangShan + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2 or later, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "system/address-spaces.h" +#include "hw/boards.h" +#include "hw/char/serial-mm.h" +#include "hw/intc/riscv_aclint.h" +#include "hw/intc/riscv_aplic.h" +#include "hw/intc/riscv_imsic.h" +#include "hw/qdev-properties.h" +#include "hw/riscv/boot.h" +#include "hw/riscv/xiangshan_kmh.h" +#include "hw/riscv/riscv_hart.h" +#include "system/system.h" + +static const MemMapEntry xiangshan_kmh_memmap[] = { + [XIANGSHAN_KMH_ROM] = { 0x1000, 0xF000 }, + [XIANGSHAN_KMH_UART0] = { 0x310B0000, 0x10000 }, + [XIANGSHAN_KMH_CLINT] = { 0x38000000, 0x10000 }, + [XIANGSHAN_KMH_APLIC_M] = { 0x31100000, 0x4000 }, + [XIANGSHAN_KMH_APLIC_S] = { 0x31120000, 0x4000 }, + [XIANGSHAN_KMH_IMSIC_M] = { 0x3A800000, 0x10000 }, + [XIANGSHAN_KMH_IMSIC_S] = { 0x3B000000, 0x80000 }, + [XIANGSHAN_KMH_DRAM] = { 0x80000000, 0x0 }, +}; + +static DeviceState *xiangshan_kmh_create_aia(uint32_t num_harts) +{ + int i; + const MemMapEntry *memmap = xiangshan_kmh_memmap; + hwaddr addr = 0; + DeviceState *aplic_m = NULL; + + /* M-level IMSICs */ + addr = memmap[XIANGSHAN_KMH_IMSIC_M].base; + for (i = 0; i < num_harts; i++) { + riscv_imsic_create(addr + i * IMSIC_HART_SIZE(0), i, true, + 1, XIANGSHAN_KMH_IMSIC_NUM_IDS); + } + + /* S-level IMSICs */ + addr = memmap[XIANGSHAN_KMH_IMSIC_S].base; + for (i = 0; i < num_harts; i++) { + riscv_imsic_create(addr + + i * IMSIC_HART_SIZE(XIANGSHAN_KMH_IMSIC_GUEST_BITS), + i, false, 1 + XIANGSHAN_KMH_IMSIC_GUEST_BITS, + XIANGSHAN_KMH_IMSIC_NUM_IDS); + } + + /* M-level APLIC */ + aplic_m = riscv_aplic_create(memmap[XIANGSHAN_KMH_APLIC_M].base, + memmap[XIANGSHAN_KMH_APLIC_M].size, + 0, 0, XIANGSHAN_KMH_APLIC_NUM_SOURCES, + 1, true, true, NULL); + + /* S-level APLIC */ + riscv_aplic_create(memmap[XIANGSHAN_KMH_APLIC_S].base, + memmap[XIANGSHAN_KMH_APLIC_S].size, + 0, 0, XIANGSHAN_KMH_APLIC_NUM_SOURCES, + 1, true, false, aplic_m); + + return aplic_m; +} + +static void xiangshan_kmh_soc_realize(DeviceState *dev, Error **errp) +{ + MachineState *ms = MACHINE(qdev_get_machine()); + XiangshanKmhSoCState *s = XIANGSHAN_KMH_SOC(dev); + const MemMapEntry *memmap = xiangshan_kmh_memmap; + MemoryRegion *system_memory = get_system_memory(); + uint32_t num_harts = ms->smp.cpus; + + qdev_prop_set_uint32(DEVICE(&s->cpus), "num-harts", num_harts); + qdev_prop_set_uint32(DEVICE(&s->cpus), "hartid-base", 0); + qdev_prop_set_string(DEVICE(&s->cpus), "cpu-type", + TYPE_RISCV_CPU_XIANGSHAN_KMH); + sysbus_realize(SYS_BUS_DEVICE(&s->cpus), &error_fatal); + + /* AIA */ + s->irqchip = xiangshan_kmh_create_aia(num_harts); + + /* UART */ + serial_mm_init(system_memory, memmap[XIANGSHAN_KMH_UART0].base, 2, + qdev_get_gpio_in(s->irqchip, XIANGSHAN_KMH_UART0_IRQ), + 115200, serial_hd(0), DEVICE_LITTLE_ENDIAN); + + /* CLINT */ + riscv_aclint_swi_create(memmap[XIANGSHAN_KMH_CLINT].base, + 0, num_harts, false); + riscv_aclint_mtimer_create(memmap[XIANGSHAN_KMH_CLINT].base + + RISCV_ACLINT_SWI_SIZE, + RISCV_ACLINT_DEFAULT_MTIMER_SIZE, + 0, num_harts, RISCV_ACLINT_DEFAULT_MTIMECMP, + RISCV_ACLINT_DEFAULT_MTIME, + XIANGSHAN_KMH_CLINT_TIMEBASE_FREQ, true); + + /* ROM */ + memory_region_init_rom(&s->rom, OBJECT(dev), "xiangshan.kunminghu.rom", + memmap[XIANGSHAN_KMH_ROM].size, &error_fatal); + memory_region_add_subregion(system_memory, + memmap[XIANGSHAN_KMH_ROM].base, &s->rom); +} + +static void xiangshan_kmh_soc_class_init(ObjectClass *klass, const void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = xiangshan_kmh_soc_realize; + dc->user_creatable = false; +} + +static void xiangshan_kmh_soc_instance_init(Object *obj) +{ + XiangshanKmhSoCState *s = XIANGSHAN_KMH_SOC(obj); + + object_initialize_child(obj, "cpus", &s->cpus, TYPE_RISCV_HART_ARRAY); +} + +static const TypeInfo xiangshan_kmh_soc_info = { + .name = TYPE_XIANGSHAN_KMH_SOC, + .parent = TYPE_DEVICE, + .instance_size = sizeof(XiangshanKmhSoCState), + .instance_init = xiangshan_kmh_soc_instance_init, + .class_init = xiangshan_kmh_soc_class_init, +}; + +static void xiangshan_kmh_soc_register_types(void) +{ + type_register_static(&xiangshan_kmh_soc_info); +} +type_init(xiangshan_kmh_soc_register_types) + +static void xiangshan_kmh_machine_init(MachineState *machine) +{ + XiangshanKmhState *s = XIANGSHAN_KMH_MACHINE(machine); + const MemMapEntry *memmap = xiangshan_kmh_memmap; + MemoryRegion *system_memory = get_system_memory(); + hwaddr start_addr = memmap[XIANGSHAN_KMH_DRAM].base; + + /* Initialize SoC */ + object_initialize_child(OBJECT(machine), "soc", &s->soc, + TYPE_XIANGSHAN_KMH_SOC); + qdev_realize(DEVICE(&s->soc), NULL, &error_fatal); + + /* Register RAM */ + memory_region_add_subregion(system_memory, + memmap[XIANGSHAN_KMH_DRAM].base, + machine->ram); + + /* ROM reset vector */ + riscv_setup_rom_reset_vec(machine, &s->soc.cpus, + start_addr, + memmap[XIANGSHAN_KMH_ROM].base, + memmap[XIANGSHAN_KMH_ROM].size, 0, 0); + if (machine->firmware) { + riscv_load_firmware(machine->firmware, &start_addr, NULL); + } + + /* Note: dtb has been integrated into firmware(OpenSBI) when compiling */ +} + +static void xiangshan_kmh_machine_class_init(ObjectClass *klass, const void *data) +{ + MachineClass *mc = MACHINE_CLASS(klass); + static const char *const valid_cpu_types[] = { + TYPE_RISCV_CPU_XIANGSHAN_KMH, + NULL + }; + + mc->desc = "RISC-V Board compatible with the Xiangshan " \ + "Kunminghu FPGA prototype platform"; + mc->init = xiangshan_kmh_machine_init; + mc->max_cpus = XIANGSHAN_KMH_MAX_CPUS; + mc->default_cpu_type = TYPE_RISCV_CPU_XIANGSHAN_KMH; + mc->valid_cpu_types = valid_cpu_types; + mc->default_ram_id = "xiangshan.kunminghu.ram"; +} + +static const TypeInfo xiangshan_kmh_machine_info = { + .name = TYPE_XIANGSHAN_KMH_MACHINE, + .parent = TYPE_MACHINE, + .instance_size = sizeof(XiangshanKmhState), + .class_init = xiangshan_kmh_machine_class_init, +}; + +static void xiangshan_kmh_machine_register_types(void) +{ + type_register_static(&xiangshan_kmh_machine_info); +} +type_init(xiangshan_kmh_machine_register_types) diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/Kconfig +++ b/hw/riscv/Kconfig @@ -XXX,XX +XXX,XX @@ config SPIKE select HTIF select RISCV_ACLINT select SIFIVE_PLIC + +config XIANGSHAN_KUNMINGHU + bool + default y + depends on RISCV64 + select RISCV_ACLINT + select RISCV_APLIC + select RISCV_IMSIC + select SERIAL_MM diff --git a/hw/riscv/meson.build b/hw/riscv/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/meson.build +++ b/hw/riscv/meson.build @@ -XXX,XX +XXX,XX @@ riscv_ss.add(when: 'CONFIG_ACPI', if_true: files('virt-acpi-build.c')) riscv_ss.add(when: 'CONFIG_RISCV_IOMMU', if_true: files( 'riscv-iommu.c', 'riscv-iommu-pci.c', 'riscv-iommu-sys.c', 'riscv-iommu-hpm.c')) riscv_ss.add(when: 'CONFIG_MICROBLAZE_V', if_true: files('microblaze-v-generic.c')) +riscv_ss.add(when: 'CONFIG_XIANGSHAN_KUNMINGHU', if_true: files('xiangshan_kmh.c')) hw_arch += {'riscv': riscv_ss} -- 2.50.0 From: Max Chou <max.chou@sifive.com> According to the V spec, the vector fault-only-first load instructions may change the VL CSR. So the ldff_trans TCG translation function should generate the lookup_and_goto_ptr flow as the vsetvl/vsetvli translation function to make sure the vl_eq_vlmax TB flag is correct. Signed-off-by: Max Chou <max.chou@sifive.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20250627133013.443997-1-max.chou@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/insn_trans/trans_rvv.c.inc | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/target/riscv/insn_trans/trans_rvv.c.inc b/target/riscv/insn_trans/trans_rvv.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_rvv.c.inc +++ b/target/riscv/insn_trans/trans_rvv.c.inc @@ -XXX,XX +XXX,XX @@ static bool ldff_trans(uint32_t vd, uint32_t rs1, uint32_t data, fn(dest, mask, base, tcg_env, desc); finalize_rvv_inst(s); + + /* vector unit-stride fault-only-first load may modify vl CSR */ + gen_update_pc(s, s->cur_insn_len); + lookup_and_goto_ptr(s); + s->base.is_jmp = DISAS_NORETURN; + return true; } -- 2.50.0 From: "liu.xuemei1@zte.com.cn" <liu.xuemei1@zte.com.cn> Address an error in migration when aia is configured as 'aplic-imsic' in riscv kvm vm by adding riscv_aplic_state_needed() and riscv_imsic_state_needed() to determine whether the corresponding sates are needed. Previously, the fields in the vmsds of 'riscv_aplic' and 'riscv_imsic' can only be initialized under certain special conditions in commit 95a97b3fd2. However, the corresponding ses of these vmsds are inserted into the savevm_state.handlers unconditionally. This led to migration failure characterized by uninitialized fields when save vm state: qemu-system-riscv64: ../migration/vmstate.c:433: vmstate_save_state_v: Assertion 'first_elem || !n_elems || !size' failed. Fixes: 95a97b3fd2 ("target/riscv: update APLIC and IMSIC to support KVM AIA") Signed-off-by: Xuemei Liu <liu.xuemei1@zte.com.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20250616150034827wuHs_ffe3Qm8cqFXT7HeW@zte.com.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/intc/riscv_aplic.c | 12 ++++++++++-- hw/intc/riscv_imsic.c | 10 ++++++++-- 2 files changed, 18 insertions(+), 4 deletions(-) diff --git a/hw/intc/riscv_aplic.c b/hw/intc/riscv_aplic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/riscv_aplic.c +++ b/hw/intc/riscv_aplic.c @@ -XXX,XX +XXX,XX @@ static const Property riscv_aplic_properties[] = { DEFINE_PROP_BOOL("mmode", RISCVAPLICState, mmode, 0), }; +static bool riscv_aplic_state_needed(void *opaque) +{ + RISCVAPLICState *aplic = opaque; + + return riscv_use_emulated_aplic(aplic->msimode); +} + static const VMStateDescription vmstate_riscv_aplic = { .name = "riscv_aplic", - .version_id = 2, - .minimum_version_id = 2, + .version_id = 3, + .minimum_version_id = 3, + .needed = riscv_aplic_state_needed, .fields = (const VMStateField[]) { VMSTATE_UINT32(domaincfg, RISCVAPLICState), VMSTATE_UINT32(mmsicfgaddr, RISCVAPLICState), diff --git a/hw/intc/riscv_imsic.c b/hw/intc/riscv_imsic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/riscv_imsic.c +++ b/hw/intc/riscv_imsic.c @@ -XXX,XX +XXX,XX @@ static const Property riscv_imsic_properties[] = { DEFINE_PROP_UINT32("num-irqs", RISCVIMSICState, num_irqs, 0), }; +static bool riscv_imsic_state_needed(void *opaque) +{ + return !kvm_irqchip_in_kernel(); +} + static const VMStateDescription vmstate_riscv_imsic = { .name = "riscv_imsic", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, + .needed = riscv_imsic_state_needed, .fields = (const VMStateField[]) { VMSTATE_VARRAY_UINT32(eidelivery, RISCVIMSICState, num_pages, 0, -- 2.50.0 From: Charalampos Mitrodimas <charmitro@posteo.net> According to the RISC-V Privileged Architecture specification, the low bit of MEPC/SEPC must always be zero. When IALIGN=32, the two low bits must be zero. This commit fixes the behavior of MEPC/SEPC CSR reads and writes, and the implicit reads by MRET/SRET instructions to properly mask the lowest bit(s) based on whether the C extension is enabled: - When C extension is enabled (IALIGN=16): mask bit 0 - When C extension is disabled (IALIGN=32): mask bits [1:0] Previously, when vectored mode bits from STVEC (which sets bit 0 for vectored mode) were written to MEPC, the bits would not be cleared correctly, causing incorrect behavior on MRET. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2855 Signed-off-by: Charalampos Mitrodimas <charmitro@posteo.net> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20250703182157.281320-2-charmitro@posteo.net> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/internals.h | 11 +++++++++++ target/riscv/csr.c | 8 ++++---- target/riscv/op_helper.c | 4 ++-- 3 files changed, 17 insertions(+), 6 deletions(-) diff --git a/target/riscv/internals.h b/target/riscv/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/internals.h +++ b/target/riscv/internals.h @@ -XXX,XX +XXX,XX @@ static inline float16 check_nanbox_bf16(CPURISCVState *env, uint64_t f) } } +static inline target_ulong get_xepc_mask(CPURISCVState *env) +{ + /* When IALIGN=32, both low bits must be zero. + * When IALIGN=16 (has C extension), only bit 0 must be zero. */ + if (riscv_has_ext(env, RVC)) { + return ~(target_ulong)1; + } else { + return ~(target_ulong)3; + } +} + #ifndef CONFIG_USER_ONLY /* Our implementation of SysemuCPUOps::has_work */ bool riscv_cpu_has_work(CPUState *cs); diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException write_mscratch(CPURISCVState *env, int csrno, static RISCVException read_mepc(CPURISCVState *env, int csrno, target_ulong *val) { - *val = env->mepc; + *val = env->mepc & get_xepc_mask(env); return RISCV_EXCP_NONE; } static RISCVException write_mepc(CPURISCVState *env, int csrno, target_ulong val, uintptr_t ra) { - env->mepc = val; + env->mepc = val & get_xepc_mask(env); return RISCV_EXCP_NONE; } @@ -XXX,XX +XXX,XX @@ static RISCVException write_sscratch(CPURISCVState *env, int csrno, static RISCVException read_sepc(CPURISCVState *env, int csrno, target_ulong *val) { - *val = env->sepc; + *val = env->sepc & get_xepc_mask(env); return RISCV_EXCP_NONE; } static RISCVException write_sepc(CPURISCVState *env, int csrno, target_ulong val, uintptr_t ra) { - env->sepc = val; + env->sepc = val & get_xepc_mask(env); return RISCV_EXCP_NONE; } diff --git a/target/riscv/op_helper.c b/target/riscv/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/op_helper.c +++ b/target/riscv/op_helper.c @@ -XXX,XX +XXX,XX @@ target_ulong helper_sret(CPURISCVState *env) riscv_raise_exception(env, RISCV_EXCP_ILLEGAL_INST, GETPC()); } - target_ulong retpc = env->sepc; + target_ulong retpc = env->sepc & get_xepc_mask(env); if (!riscv_cpu_allow_16bit_insn(&env_archcpu(env)->cfg, env->priv_ver, env->misa_ext) && (retpc & 0x3)) { @@ -XXX,XX +XXX,XX @@ static target_ulong ssdbltrp_mxret(CPURISCVState *env, target_ulong mstatus, target_ulong helper_mret(CPURISCVState *env) { - target_ulong retpc = env->mepc; + target_ulong retpc = env->mepc & get_xepc_mask(env); uint64_t mstatus = env->mstatus; target_ulong prev_priv = get_field(mstatus, MSTATUS_MPP); -- 2.50.0 From: Charalampos Mitrodimas <charmitro@posteo.net> Add a regression test to verify that MEPC properly masks the lower bits when an address with mode bits is written to it, as required by the RISC-V Privileged Architecture specification. The test sets STVEC to an address with bit 0 set (vectored mode), triggers an illegal instruction exception, copies STVEC to MEPC in the trap handler, and verifies that MEPC masks bits [1:0] correctly for IALIGN=32. Without the fix, MEPC retains the mode bits (returns non-zero/FAIL). With the fix, MEPC clears bits [1:0] (returns 0/PASS). Signed-off-by: Charalampos Mitrodimas <charmitro@posteo.net> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20250703182157.281320-3-charmitro@posteo.net> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- tests/tcg/riscv64/Makefile.softmmu-target | 4 ++ tests/tcg/riscv64/test-mepc-masking.S | 73 +++++++++++++++++++++++ 2 files changed, 77 insertions(+) create mode 100644 tests/tcg/riscv64/test-mepc-masking.S diff --git a/tests/tcg/riscv64/Makefile.softmmu-target b/tests/tcg/riscv64/Makefile.softmmu-target index XXXXXXX..XXXXXXX 100644 --- a/tests/tcg/riscv64/Makefile.softmmu-target +++ b/tests/tcg/riscv64/Makefile.softmmu-target @@ -XXX,XX +XXX,XX @@ EXTRA_RUNS += run-issue1060 run-issue1060: issue1060 $(call run-test, $<, $(QEMU) $(QEMU_OPTS)$<) +EXTRA_RUNS += run-test-mepc-masking +run-test-mepc-masking: test-mepc-masking + $(call run-test, $<, $(QEMU) $(QEMU_OPTS)$<) + # We don't currently support the multiarch system tests undefine MULTIARCH_TESTS diff --git a/tests/tcg/riscv64/test-mepc-masking.S b/tests/tcg/riscv64/test-mepc-masking.S new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/tcg/riscv64/test-mepc-masking.S @@ -XXX,XX +XXX,XX @@ +/* + * Test for MEPC masking bug fix + * + * This test verifies that MEPC properly masks the lower bits according + * to the RISC-V specification when vectored mode bits from STVEC are + * written to MEPC. + */ + + .option norvc + + .text + .global _start +_start: + /* Set up machine trap vector */ + lla t0, machine_trap_handler + csrw mtvec, t0 + + /* Set STVEC with vectored mode (mode bits = 01) */ + li t0, 0x80004001 + csrw stvec, t0 + + /* Clear medeleg to handle exceptions in M-mode */ + csrw medeleg, zero + + /* Trigger illegal instruction exception */ + .word 0xffffffff + +test_completed: + /* Exit with result in a0 */ + /* a0 = 0: success (bits [1:0] were masked) */ + /* a0 != 0: failure (some bits were not masked) */ + j _exit + +machine_trap_handler: + /* Check if illegal instruction (mcause = 2) */ + csrr t0, mcause + li t1, 2 + bne t0, t1, skip_test + + /* Test: Copy STVEC (with mode bits) to MEPC */ + csrr t0, stvec /* t0 = 0x80004001 */ + csrw mepc, t0 /* Write to MEPC */ + csrr t1, mepc /* Read back MEPC */ + + /* Check if bits [1:0] are masked (IALIGN=32 without RVC) */ + andi a0, t1, 3 /* a0 = 0 if both bits masked correctly */ + + /* Set correct return address */ + lla t0, test_completed + csrw mepc, t0 + +skip_test: + mret + +/* Exit with semihosting */ +_exit: + lla a1, semiargs + li t0, 0x20026 /* ADP_Stopped_ApplicationExit */ + sd t0, 0(a1) + sd a0, 8(a1) + li a0, 0x20 /* TARGET_SYS_EXIT_EXTENDED */ + + /* Semihosting call sequence */ + .balign 16 + slli zero, zero, 0x1f + ebreak + srai zero, zero, 0x7 + j . + + .data + .balign 8 +semiargs: + .space 16 -- 2.50.0 From: Vasilis Liaskovitis <vliaskovitis@suse.com> Usage of vsetvli instruction is reserved if VLMAX is changed when vsetvli rs1 and rd arguments are x0. In this case, if the new property is true, only the vill bit will be set. See https://github.com/riscv/riscv-isa-manual/blob/main/src/v-st-ext.adoc#avl-encoding According to the spec, the above use cases are reserved, and "Implementations may set vill in either case." Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2422 Signed-off-by: Vasilis Liaskovitis <vliaskovitis@suse.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20250618213542.22873-1-vliaskovitis@suse.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/helper.h | 2 +- target/riscv/cpu_cfg_fields.h.inc | 1 + target/riscv/cpu.c | 1 + target/riscv/vector_helper.c | 12 +++++++++++- target/riscv/insn_trans/trans_rvv.c.inc | 4 ++-- 5 files changed, 16 insertions(+), 4 deletions(-) diff --git a/target/riscv/helper.h b/target/riscv/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/helper.h +++ b/target/riscv/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_3(hyp_hsv_d, TCG_CALL_NO_WG, void, env, tl, tl) #endif /* Vector functions */ -DEF_HELPER_3(vsetvl, tl, env, tl, tl) +DEF_HELPER_4(vsetvl, tl, env, tl, tl, tl) DEF_HELPER_5(vle8_v, void, ptr, ptr, tl, env, i32) DEF_HELPER_5(vle16_v, void, ptr, ptr, tl, env, i32) DEF_HELPER_5(vle32_v, void, ptr, ptr, tl, env, i32) diff --git a/target/riscv/cpu_cfg_fields.h.inc b/target/riscv/cpu_cfg_fields.h.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_cfg_fields.h.inc +++ b/target/riscv/cpu_cfg_fields.h.inc @@ -XXX,XX +XXX,XX @@ BOOL_FIELD(ext_supm) BOOL_FIELD(rvv_ta_all_1s) BOOL_FIELD(rvv_ma_all_1s) BOOL_FIELD(rvv_vl_half_avl) +BOOL_FIELD(rvv_vsetvl_x0_vill) /* Named features */ BOOL_FIELD(ext_svade) BOOL_FIELD(ext_zic64b) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static const Property riscv_cpu_properties[] = { DEFINE_PROP_BOOL("rvv_ta_all_1s", RISCVCPU, cfg.rvv_ta_all_1s, false), DEFINE_PROP_BOOL("rvv_ma_all_1s", RISCVCPU, cfg.rvv_ma_all_1s, false), DEFINE_PROP_BOOL("rvv_vl_half_avl", RISCVCPU, cfg.rvv_vl_half_avl, false), + DEFINE_PROP_BOOL("rvv_vsetvl_x0_vill", RISCVCPU, cfg.rvv_vsetvl_x0_vill, false), /* * write_misa() is marked as experimental for now so mark diff --git a/target/riscv/vector_helper.c b/target/riscv/vector_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/vector_helper.c +++ b/target/riscv/vector_helper.c @@ -XXX,XX +XXX,XX @@ #include <math.h> target_ulong HELPER(vsetvl)(CPURISCVState *env, target_ulong s1, - target_ulong s2) + target_ulong s2, target_ulong x0) { int vlmax, vl; RISCVCPU *cpu = env_archcpu(env); @@ -XXX,XX +XXX,XX @@ target_ulong HELPER(vsetvl)(CPURISCVState *env, target_ulong s1, } else { vl = vlmax; } + + if (cpu->cfg.rvv_vsetvl_x0_vill && x0 && (env->vl != vl)) { + /* only set vill bit. */ + env->vill = 1; + env->vtype = 0; + env->vl = 0; + env->vstart = 0; + return 0; + } + env->vl = vl; env->vtype = s2; env->vstart = 0; diff --git a/target/riscv/insn_trans/trans_rvv.c.inc b/target/riscv/insn_trans/trans_rvv.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_rvv.c.inc +++ b/target/riscv/insn_trans/trans_rvv.c.inc @@ -XXX,XX +XXX,XX @@ static bool do_vsetvl(DisasContext *s, int rd, int rs1, TCGv s2) s1 = get_gpr(s, rs1, EXT_ZERO); } - gen_helper_vsetvl(dst, tcg_env, s1, s2); + gen_helper_vsetvl(dst, tcg_env, s1, s2, tcg_constant_tl((int) (rd == 0 && rs1 == 0))); gen_set_gpr(s, rd, dst); finalize_rvv_inst(s); @@ -XXX,XX +XXX,XX @@ static bool do_vsetivli(DisasContext *s, int rd, TCGv s1, TCGv s2) dst = dest_gpr(s, rd); - gen_helper_vsetvl(dst, tcg_env, s1, s2); + gen_helper_vsetvl(dst, tcg_env, s1, s2, tcg_constant_tl(0)); gen_set_gpr(s, rd, dst); finalize_rvv_inst(s); gen_update_pc(s, s->cur_insn_len); -- 2.50.0 From: Alexandre Ghiti <alexghiti@rivosinc.com> The Svrsw60t59b extension allows to free the PTE reserved bits 60 and 59 for software to use. Reviewed-by: Deepak Gupta <debug@rivosinc.com> Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Nutty Liu<liujingqi@lanxincomputing.com> Message-ID: <20250702-dev-alex-svrsw60b59b_v2-v2-1-504ddf0f8530@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu-bits.h | 1 + target/riscv/cpu_bits.h | 3 ++- target/riscv/cpu_cfg_fields.h.inc | 1 + hw/riscv/riscv-iommu.c | 3 ++- target/riscv/cpu.c | 2 ++ target/riscv/cpu_helper.c | 3 ++- target/riscv/tcg/tcg-cpu.c | 8 ++++++++ 7 files changed, 18 insertions(+), 3 deletions(-) diff --git a/hw/riscv/riscv-iommu-bits.h b/hw/riscv/riscv-iommu-bits.h index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu-bits.h +++ b/hw/riscv/riscv-iommu-bits.h @@ -XXX,XX +XXX,XX @@ struct riscv_iommu_pq_record { #define RISCV_IOMMU_CAP_SV39 BIT_ULL(9) #define RISCV_IOMMU_CAP_SV48 BIT_ULL(10) #define RISCV_IOMMU_CAP_SV57 BIT_ULL(11) +#define RISCV_IOMMU_CAP_SVRSW60T59B BIT_ULL(14) #define RISCV_IOMMU_CAP_SV32X4 BIT_ULL(16) #define RISCV_IOMMU_CAP_SV39X4 BIT_ULL(17) #define RISCV_IOMMU_CAP_SV48X4 BIT_ULL(18) diff --git a/target/riscv/cpu_bits.h b/target/riscv/cpu_bits.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_bits.h +++ b/target/riscv/cpu_bits.h @@ -XXX,XX +XXX,XX @@ typedef enum { #define PTE_SOFT 0x300 /* Reserved for Software */ #define PTE_PBMT 0x6000000000000000ULL /* Page-based memory types */ #define PTE_N 0x8000000000000000ULL /* NAPOT translation */ -#define PTE_RESERVED 0x1FC0000000000000ULL /* Reserved bits */ +#define PTE_RESERVED(svrsw60t59b) \ + (svrsw60t59b ? 0x07C0000000000000ULL : 0x1FC0000000000000ULL) /* Reserved bits */ #define PTE_ATTR (PTE_N | PTE_PBMT) /* All attributes bits */ /* Page table PPN shift amount */ diff --git a/target/riscv/cpu_cfg_fields.h.inc b/target/riscv/cpu_cfg_fields.h.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_cfg_fields.h.inc +++ b/target/riscv/cpu_cfg_fields.h.inc @@ -XXX,XX +XXX,XX @@ BOOL_FIELD(ext_svadu) BOOL_FIELD(ext_svinval) BOOL_FIELD(ext_svnapot) BOOL_FIELD(ext_svpbmt) +BOOL_FIELD(ext_svrsw60t59b) BOOL_FIELD(ext_svvptc) BOOL_FIELD(ext_svukte) BOOL_FIELD(ext_zdinx) diff --git a/hw/riscv/riscv-iommu.c b/hw/riscv/riscv-iommu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.c +++ b/hw/riscv/riscv-iommu.c @@ -XXX,XX +XXX,XX @@ static void riscv_iommu_realize(DeviceState *dev, Error **errp) } if (s->enable_g_stage) { s->cap |= RISCV_IOMMU_CAP_SV32X4 | RISCV_IOMMU_CAP_SV39X4 | - RISCV_IOMMU_CAP_SV48X4 | RISCV_IOMMU_CAP_SV57X4; + RISCV_IOMMU_CAP_SV48X4 | RISCV_IOMMU_CAP_SV57X4 | + RISCV_IOMMU_CAP_SVRSW60T59B; } if (s->hpm_cntrs > 0) { diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(svinval, PRIV_VERSION_1_12_0, ext_svinval), ISA_EXT_DATA_ENTRY(svnapot, PRIV_VERSION_1_12_0, ext_svnapot), ISA_EXT_DATA_ENTRY(svpbmt, PRIV_VERSION_1_12_0, ext_svpbmt), + ISA_EXT_DATA_ENTRY(svrsw60t59b, PRIV_VERSION_1_13_0, ext_svrsw60t59b), ISA_EXT_DATA_ENTRY(svukte, PRIV_VERSION_1_13_0, ext_svukte), ISA_EXT_DATA_ENTRY(svvptc, PRIV_VERSION_1_13_0, ext_svvptc), ISA_EXT_DATA_ENTRY(xtheadba, PRIV_VERSION_1_11_0, ext_xtheadba), @@ -XXX,XX +XXX,XX @@ const RISCVCPUMultiExtConfig riscv_cpu_extensions[] = { MULTI_EXT_CFG_BOOL("svinval", ext_svinval, false), MULTI_EXT_CFG_BOOL("svnapot", ext_svnapot, false), MULTI_EXT_CFG_BOOL("svpbmt", ext_svpbmt, false), + MULTI_EXT_CFG_BOOL("svrsw60t59b", ext_svrsw60t59b, false), MULTI_EXT_CFG_BOOL("svvptc", ext_svvptc, true), MULTI_EXT_CFG_BOOL("zicntr", ext_zicntr, true), diff --git a/target/riscv/cpu_helper.c b/target/riscv/cpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_helper.c +++ b/target/riscv/cpu_helper.c @@ -XXX,XX +XXX,XX @@ static int get_physical_address(CPURISCVState *env, hwaddr *physical, bool svade = riscv_cpu_cfg(env)->ext_svade; bool svadu = riscv_cpu_cfg(env)->ext_svadu; bool adue = svadu ? env->menvcfg & MENVCFG_ADUE : !svade; + bool svrsw60t59b = riscv_cpu_cfg(env)->ext_svrsw60t59b; if (first_stage && two_stage && env->virt_enabled) { pbmte = pbmte && (env->henvcfg & HENVCFG_PBMTE); @@ -XXX,XX +XXX,XX @@ static int get_physical_address(CPURISCVState *env, hwaddr *physical, if (riscv_cpu_sxl(env) == MXL_RV32) { ppn = pte >> PTE_PPN_SHIFT; } else { - if (pte & PTE_RESERVED) { + if (pte & PTE_RESERVED(svrsw60t59b)) { qemu_log_mask(LOG_GUEST_ERROR, "%s: reserved bits set in PTE: " "addr: 0x%" HWADDR_PRIx " pte: 0x" TARGET_FMT_lx "\n", __func__, pte_addr, pte); diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ void riscv_cpu_validate_set_extensions(RISCVCPU *cpu, Error **errp) cpu->cfg.ext_ssctr = false; } + if (cpu->cfg.ext_svrsw60t59b && + (!cpu->cfg.mmu || mcc->def->misa_mxl_max == MXL_RV32)) { + error_setg(errp, "svrsw60t59b is not supported on RV32 and MMU-less platforms"); + return; + } + /* * Disable isa extensions based on priv spec after we * validated and set everything we need. @@ -XXX,XX +XXX,XX @@ static void riscv_init_max_cpu_extensions(Object *obj) if (env->misa_mxl != MXL_RV32) { isa_ext_update_enabled(cpu, CPU_CFG_OFFSET(ext_zcf), false); + } else { + isa_ext_update_enabled(cpu, CPU_CFG_OFFSET(ext_svrsw60t59b), false); } /* -- 2.50.0