The following changes since commit 5e7b204dbfae9a562fc73684986f936b97f63877: Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging (2020-12-09 20:08:54 +0000) are available in the Git repository at: https://github.com/legoater/qemu/ tags/pull-aspeed-20201210 for you to fetch changes up to 6f5f6507e49df4820207a94f3aeaaeab08092d32: aspeed: g220a-bmc: Add an FRU (2020-12-10 12:11:03 +0100) ---------------------------------------------------------------- Aspeed patches : * New device model for EMC1413/EMC1414 temperature sensors (I2C) * New g220a-bmc Aspeed machine * couple of Aspeed cleanups ---------------------------------------------------------------- Cédric Le Goater (1): aspeed/smc: Add support for address lane disablement Joel Stanley (1): ast2600: SRAM is 89KB John Wang (3): hw/misc: add an EMC141{3,4} device model aspeed: Add support for the g220a-bmc board aspeed: g220a-bmc: Add an FRU include/hw/misc/emc141x_regs.h | 37 +++++ hw/arm/aspeed.c | 72 +++++++++ hw/arm/aspeed_ast2600.c | 2 +- hw/misc/emc141x.c | 326 +++++++++++++++++++++++++++++++++++++++++ hw/ssi/aspeed_smc.c | 25 +++- tests/qtest/emc141x-test.c | 81 ++++++++++ hw/arm/Kconfig | 1 + hw/misc/Kconfig | 4 + hw/misc/meson.build | 1 + tests/qtest/meson.build | 1 + 10 files changed, 542 insertions(+), 8 deletions(-) create mode 100644 include/hw/misc/emc141x_regs.h create mode 100644 hw/misc/emc141x.c create mode 100644 tests/qtest/emc141x-test.c From: John Wang <wangzhiqiang.bj@bytedance.com> Largely inspired by the TMP421 temperature sensor, here is a model for the EMC1413/EMC1414 temperature sensors. Specs can be found here : http://ww1.microchip.com/downloads/en/DeviceDoc/20005274A.pdf Cc: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20201122105134.671-1-wangzhiqiang.bj@bytedance.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> --- include/hw/misc/emc141x_regs.h | 37 ++++ hw/misc/emc141x.c | 326 +++++++++++++++++++++++++++++++++ tests/qtest/emc141x-test.c | 81 ++++++++ hw/arm/Kconfig | 1 + hw/misc/Kconfig | 4 + hw/misc/meson.build | 1 + tests/qtest/meson.build | 1 + 7 files changed, 451 insertions(+) create mode 100644 include/hw/misc/emc141x_regs.h create mode 100644 hw/misc/emc141x.c create mode 100644 tests/qtest/emc141x-test.c diff --git a/include/hw/misc/emc141x_regs.h b/include/hw/misc/emc141x_regs.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/emc141x_regs.h @@ -XXX,XX +XXX,XX @@ +/* + * SMSC EMC141X temperature sensor. + * + * Browse the data sheet: + * + * http://ww1.microchip.com/downloads/en/DeviceDoc/20005274A.pdf + * + * This work is licensed under the terms of the GNU GPL, version 2 or + * later. See the COPYING file in the top-level directory. + */ + +#ifndef TMP105_REGS_H +#define TMP105_REGS_H + +#define EMC1413_DEVICE_ID 0x21 +#define EMC1414_DEVICE_ID 0x25 +#define MANUFACTURER_ID 0x5d +#define REVISION 0x04 + +/* the EMC141X registers */ +#define EMC141X_TEMP_HIGH0 0x00 +#define EMC141X_TEMP_HIGH1 0x01 +#define EMC141X_TEMP_HIGH2 0x23 +#define EMC141X_TEMP_HIGH3 0x2a +#define EMC141X_TEMP_MAX_HIGH0 0x05 +#define EMC141X_TEMP_MIN_HIGH0 0x06 +#define EMC141X_TEMP_MAX_HIGH1 0x07 +#define EMC141X_TEMP_MIN_HIGH1 0x08 +#define EMC141X_TEMP_MAX_HIGH2 0x15 +#define EMC141X_TEMP_MIN_HIGH2 0x16 +#define EMC141X_TEMP_MAX_HIGH3 0x2c +#define EMC141X_TEMP_MIN_HIGH3 0x2d +#define EMC141X_DEVICE_ID 0xfd +#define EMC141X_MANUFACTURER_ID 0xfe +#define EMC141X_REVISION 0xff + +#endif diff --git a/hw/misc/emc141x.c b/hw/misc/emc141x.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/emc141x.c @@ -XXX,XX +XXX,XX @@ +/* + * SMSC EMC141X temperature sensor. + * + * Copyright (c) 2020 Bytedance Corporation + * Written by John Wang <wangzhiqiang.bj@bytedance.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 or + * (at your option) version 3 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "hw/i2c/i2c.h" +#include "migration/vmstate.h" +#include "qapi/error.h" +#include "qapi/visitor.h" +#include "qemu/module.h" +#include "qom/object.h" +#include "hw/misc/emc141x_regs.h" + +#define SENSORS_COUNT_MAX 4 + +struct EMC141XState { + I2CSlave parent_obj; + struct { + uint8_t raw_temp_min; + uint8_t raw_temp_current; + uint8_t raw_temp_max; + } sensor[SENSORS_COUNT_MAX]; + uint8_t len; + uint8_t data; + uint8_t pointer; +}; + +struct EMC141XClass { + I2CSlaveClass parent_class; + uint8_t model; + unsigned sensors_count; +}; + +#define TYPE_EMC141X "emc141x" +OBJECT_DECLARE_TYPE(EMC141XState, EMC141XClass, EMC141X) + +static void emc141x_get_temperature(Object *obj, Visitor *v, const char *name, + void *opaque, Error **errp) +{ + EMC141XState *s = EMC141X(obj); + EMC141XClass *sc = EMC141X_GET_CLASS(s); + int64_t value; + unsigned tempid; + + if (sscanf(name, "temperature%u", &tempid) != 1) { + error_setg(errp, "error reading %s: %s", name, g_strerror(errno)); + return; + } + + if (tempid >= sc->sensors_count) { + error_setg(errp, "error reading %s", name); + return; + } + + value = s->sensor[tempid].raw_temp_current * 1000; + + visit_type_int(v, name, &value, errp); +} + +static void emc141x_set_temperature(Object *obj, Visitor *v, const char *name, + void *opaque, Error **errp) +{ + EMC141XState *s = EMC141X(obj); + EMC141XClass *sc = EMC141X_GET_CLASS(s); + int64_t temp; + unsigned tempid; + + if (!visit_type_int(v, name, &temp, errp)) { + return; + } + + if (sscanf(name, "temperature%u", &tempid) != 1) { + error_setg(errp, "error reading %s: %s", name, g_strerror(errno)); + return; + } + + if (tempid >= sc->sensors_count) { + error_setg(errp, "error reading %s", name); + return; + } + + s->sensor[tempid].raw_temp_current = temp / 1000; +} + +static void emc141x_read(EMC141XState *s) +{ + EMC141XClass *sc = EMC141X_GET_CLASS(s); + switch (s->pointer) { + case EMC141X_DEVICE_ID: + s->data = sc->model; + break; + case EMC141X_MANUFACTURER_ID: + s->data = MANUFACTURER_ID; + break; + case EMC141X_REVISION: + s->data = REVISION; + break; + case EMC141X_TEMP_HIGH0: + s->data = s->sensor[0].raw_temp_current; + break; + case EMC141X_TEMP_HIGH1: + s->data = s->sensor[1].raw_temp_current; + break; + case EMC141X_TEMP_HIGH2: + s->data = s->sensor[2].raw_temp_current; + break; + case EMC141X_TEMP_HIGH3: + s->data = s->sensor[3].raw_temp_current; + break; + case EMC141X_TEMP_MAX_HIGH0: + s->data = s->sensor[0].raw_temp_max; + break; + case EMC141X_TEMP_MAX_HIGH1: + s->data = s->sensor[1].raw_temp_max; + break; + case EMC141X_TEMP_MAX_HIGH2: + s->data = s->sensor[2].raw_temp_max; + break; + case EMC141X_TEMP_MAX_HIGH3: + s->data = s->sensor[3].raw_temp_max; + break; + case EMC141X_TEMP_MIN_HIGH0: + s->data = s->sensor[0].raw_temp_min; + break; + case EMC141X_TEMP_MIN_HIGH1: + s->data = s->sensor[1].raw_temp_min; + break; + case EMC141X_TEMP_MIN_HIGH2: + s->data = s->sensor[2].raw_temp_min; + break; + case EMC141X_TEMP_MIN_HIGH3: + s->data = s->sensor[3].raw_temp_min; + break; + default: + s->data = 0; + } +} + +static void emc141x_write(EMC141XState *s) +{ + switch (s->pointer) { + case EMC141X_TEMP_MAX_HIGH0: + s->sensor[0].raw_temp_max = s->data; + break; + case EMC141X_TEMP_MAX_HIGH1: + s->sensor[1].raw_temp_max = s->data; + break; + case EMC141X_TEMP_MAX_HIGH2: + s->sensor[2].raw_temp_max = s->data; + break; + case EMC141X_TEMP_MAX_HIGH3: + s->sensor[3].raw_temp_max = s->data; + break; + case EMC141X_TEMP_MIN_HIGH0: + s->sensor[0].raw_temp_min = s->data; + break; + case EMC141X_TEMP_MIN_HIGH1: + s->sensor[1].raw_temp_min = s->data; + break; + case EMC141X_TEMP_MIN_HIGH2: + s->sensor[2].raw_temp_min = s->data; + break; + case EMC141X_TEMP_MIN_HIGH3: + s->sensor[3].raw_temp_min = s->data; + break; + default: + s->data = 0; + } +} + +static uint8_t emc141x_rx(I2CSlave *i2c) +{ + EMC141XState *s = EMC141X(i2c); + + if (s->len == 0) { + s->len++; + return s->data; + } else { + return 0xff; + } +} + +static int emc141x_tx(I2CSlave *i2c, uint8_t data) +{ + EMC141XState *s = EMC141X(i2c); + + if (s->len == 0) { + /* first byte is the reg pointer */ + s->pointer = data; + s->len++; + } else if (s->len == 1) { + s->data = data; + emc141x_write(s); + } + + return 0; +} + +static int emc141x_event(I2CSlave *i2c, enum i2c_event event) +{ + EMC141XState *s = EMC141X(i2c); + + if (event == I2C_START_RECV) { + emc141x_read(s); + } + + s->len = 0; + return 0; +} + +static const VMStateDescription vmstate_emc141x = { + .name = "EMC141X", + .version_id = 0, + .minimum_version_id = 0, + .fields = (VMStateField[]) { + VMSTATE_UINT8(len, EMC141XState), + VMSTATE_UINT8(data, EMC141XState), + VMSTATE_UINT8(pointer, EMC141XState), + VMSTATE_I2C_SLAVE(parent_obj, EMC141XState), + VMSTATE_END_OF_LIST() + } +}; + +static void emc141x_reset(DeviceState *dev) +{ + EMC141XState *s = EMC141X(dev); + int i; + + for (i = 0; i < SENSORS_COUNT_MAX; i++) { + s->sensor[i].raw_temp_max = 0x55; + } + s->pointer = 0; + s->len = 0; +} + +static void emc141x_initfn(Object *obj) +{ + object_property_add(obj, "temperature0", "int", + emc141x_get_temperature, + emc141x_set_temperature, NULL, NULL); + object_property_add(obj, "temperature1", "int", + emc141x_get_temperature, + emc141x_set_temperature, NULL, NULL); + object_property_add(obj, "temperature2", "int", + emc141x_get_temperature, + emc141x_set_temperature, NULL, NULL); + object_property_add(obj, "temperature3", "int", + emc141x_get_temperature, + emc141x_set_temperature, NULL, NULL); +} + +static void emc141x_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + I2CSlaveClass *k = I2C_SLAVE_CLASS(klass); + + dc->reset = emc141x_reset; + k->event = emc141x_event; + k->recv = emc141x_rx; + k->send = emc141x_tx; + dc->vmsd = &vmstate_emc141x; +} + +static void emc1413_class_init(ObjectClass *klass, void *data) +{ + EMC141XClass *ec = EMC141X_CLASS(klass); + + emc141x_class_init(klass, data); + ec->model = EMC1413_DEVICE_ID; + ec->sensors_count = 3; +} + +static void emc1414_class_init(ObjectClass *klass, void *data) +{ + EMC141XClass *ec = EMC141X_CLASS(klass); + + emc141x_class_init(klass, data); + ec->model = EMC1414_DEVICE_ID; + ec->sensors_count = 4; +} + +static const TypeInfo emc141x_info = { + .name = TYPE_EMC141X, + .parent = TYPE_I2C_SLAVE, + .instance_size = sizeof(EMC141XState), + .class_size = sizeof(EMC141XClass), + .instance_init = emc141x_initfn, + .abstract = true, +}; + +static const TypeInfo emc1413_info = { + .name = "emc1413", + .parent = TYPE_EMC141X, + .class_init = emc1413_class_init, +}; + +static const TypeInfo emc1414_info = { + .name = "emc1414", + .parent = TYPE_EMC141X, + .class_init = emc1414_class_init, +}; + +static void emc141x_register_types(void) +{ + type_register_static(&emc141x_info); + type_register_static(&emc1413_info); + type_register_static(&emc1414_info); +} + +type_init(emc141x_register_types) diff --git a/tests/qtest/emc141x-test.c b/tests/qtest/emc141x-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/emc141x-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the EMC141X temperature sensor + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#include "qemu/osdep.h" + +#include "libqtest-single.h" +#include "libqos/qgraph.h" +#include "libqos/i2c.h" +#include "qapi/qmp/qdict.h" +#include "hw/misc/emc141x_regs.h" + +#define EMC1414_TEST_ID "emc1414-test" + +static int qmp_emc1414_get_temperature(const char *id) +{ + QDict *response; + int ret; + + response = qmp("{ 'execute': 'qom-get', 'arguments': { 'path': %s, " + "'property': 'temperature0' } }", id); + g_assert(qdict_haskey(response, "return")); + ret = qdict_get_int(response, "return"); + qobject_unref(response); + return ret; +} + +static void qmp_emc1414_set_temperature(const char *id, int value) +{ + QDict *response; + + response = qmp("{ 'execute': 'qom-set', 'arguments': { 'path': %s, " + "'property': 'temperature0', 'value': %d } }", id, value); + g_assert(qdict_haskey(response, "return")); + qobject_unref(response); +} + +static void send_and_receive(void *obj, void *data, QGuestAllocator *alloc) +{ + uint16_t value; + QI2CDevice *i2cdev = (QI2CDevice *)obj; + + value = qmp_emc1414_get_temperature(EMC1414_TEST_ID); + g_assert_cmpuint(value, ==, 0); + + value = i2c_get8(i2cdev, EMC141X_TEMP_HIGH0); + g_assert_cmphex(value, ==, 0); + + /* The default max value is 85C, 0x55=85 */ + value = i2c_get8(i2cdev, EMC141X_TEMP_MAX_HIGH0); + g_assert_cmphex(value, ==, 0x55); + + value = i2c_get8(i2cdev, EMC141X_TEMP_MIN_HIGH0); + g_assert_cmphex(value, ==, 0); + + /* 3000mc = 30C */ + qmp_emc1414_set_temperature(EMC1414_TEST_ID, 30000); + value = qmp_emc1414_get_temperature(EMC1414_TEST_ID); + g_assert_cmpuint(value, ==, 30000); + + value = i2c_get8(i2cdev, EMC141X_TEMP_HIGH0); + g_assert_cmphex(value, ==, 30); + +} + +static void emc1414_register_nodes(void) +{ + QOSGraphEdgeOptions opts = { + .extra_device_opts = "id=" EMC1414_TEST_ID ",address=0x70" + }; + add_qi2c_address(&opts, &(QI2CAddress) { 0x70 }); + + qos_node_create_driver("emc1414", i2c_device_create); + qos_node_consumes("emc1414", "i2c-bus", &opts); + + qos_add_test("tx-rx", "emc1414", send_and_receive, NULL); +} +libqos_init(emc1414_register_nodes); diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ASPEED_SOC select SSI_M25P80 select TMP105 select TMP421 + select EMC141X select UNIMP select LED diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -XXX,XX +XXX,XX @@ config TMP421 bool depends on I2C +config EMC141X + bool + depends on I2C + config ISA_DEBUG bool depends on ISA_BUS diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_PCI_TESTDEV', if_true: files('pci-testdev.c')) softmmu_ss.add(when: 'CONFIG_SGA', if_true: files('sga.c')) softmmu_ss.add(when: 'CONFIG_TMP105', if_true: files('tmp105.c')) softmmu_ss.add(when: 'CONFIG_TMP421', if_true: files('tmp421.c')) +softmmu_ss.add(when: 'CONFIG_EMC141X', if_true: files('emc141x.c')) softmmu_ss.add(when: 'CONFIG_UNIMP', if_true: files('unimp.c')) softmmu_ss.add(when: 'CONFIG_EMPTY_SLOT', if_true: files('empty_slot.c')) softmmu_ss.add(when: 'CONFIG_LED', if_true: files('led.c')) diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qos_test_ss.add( 'sdhci-test.c', 'spapr-phb-test.c', 'tmp105-test.c', + 'emc141x-test.c', 'usb-hcd-ohci-test.c', 'virtio-test.c', 'virtio-blk-test.c', -- 2.26.2 From: John Wang <wangzhiqiang.bj@bytedance.com> G220A is a 2 socket x86 motherboard supported by OpenBMC. Strapping configuration was obtained from hardware. Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-Id: <20201122105134.671-2-wangzhiqiang.bj@bytedance.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> --- hw/arm/aspeed.c | 60 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 60 insertions(+) diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ struct AspeedMachineState { SCU_AST2500_HW_STRAP_ACPI_ENABLE | \ SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER)) +#define G220A_BMC_HW_STRAP1 ( \ + SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE | \ + SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE | \ + SCU_AST2500_HW_STRAP_UART_DEBUG | \ + SCU_AST2500_HW_STRAP_RESERVED28 | \ + SCU_AST2500_HW_STRAP_DDR4_ENABLE | \ + SCU_HW_STRAP_2ND_BOOT_WDT | \ + SCU_HW_STRAP_VGA_CLASS_CODE | \ + SCU_HW_STRAP_LPC_RESET_PIN | \ + SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER) | \ + SCU_AST2500_HW_STRAP_SET_AXI_AHB_RATIO(AXI_AHB_RATIO_2_1) | \ + SCU_HW_STRAP_VGA_SIZE_SET(VGA_64M_DRAM) | \ + SCU_AST2500_HW_STRAP_RESERVED1) + /* Witherspoon hardware value: 0xF10AD216 (but use romulus definition) */ #define WITHERSPOON_BMC_HW_STRAP1 ROMULUS_BMC_HW_STRAP1 @@ -XXX,XX +XXX,XX @@ static void witherspoon_bmc_i2c_init(AspeedMachineState *bmc) /* Bus 11: TODO ucd90160@64 */ } +static void g220a_bmc_i2c_init(AspeedMachineState *bmc) +{ + AspeedSoCState *soc = &bmc->soc; + DeviceState *dev; + + dev = DEVICE(i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 3), + "emc1413", 0x4c)); + object_property_set_int(OBJECT(dev), "temperature0", 31000, &error_abort); + object_property_set_int(OBJECT(dev), "temperature1", 28000, &error_abort); + object_property_set_int(OBJECT(dev), "temperature2", 20000, &error_abort); + + dev = DEVICE(i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 12), + "emc1413", 0x4c)); + object_property_set_int(OBJECT(dev), "temperature0", 31000, &error_abort); + object_property_set_int(OBJECT(dev), "temperature1", 28000, &error_abort); + object_property_set_int(OBJECT(dev), "temperature2", 20000, &error_abort); + + dev = DEVICE(i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 13), + "emc1413", 0x4c)); + object_property_set_int(OBJECT(dev), "temperature0", 31000, &error_abort); + object_property_set_int(OBJECT(dev), "temperature1", 28000, &error_abort); + object_property_set_int(OBJECT(dev), "temperature2", 20000, &error_abort); +} + static bool aspeed_get_mmio_exec(Object *obj, Error **errp) { return ASPEED_MACHINE(obj)->mmio_exec; @@ -XXX,XX +XXX,XX @@ static void aspeed_machine_tacoma_class_init(ObjectClass *oc, void *data) aspeed_soc_num_cpus(amc->soc_name); }; +static void aspeed_machine_g220a_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); + + mc->desc = "Bytedance G220A BMC (ARM1176)"; + amc->soc_name = "ast2500-a1"; + amc->hw_strap1 = G220A_BMC_HW_STRAP1; + amc->fmc_model = "n25q512a"; + amc->spi_model = "mx25l25635e"; + amc->num_cs = 2; + amc->macs_mask = ASPEED_MAC1_ON | ASPEED_MAC2_ON; + amc->i2c_init = g220a_bmc_i2c_init; + mc->default_ram_size = 1024 * MiB; + mc->default_cpus = mc->min_cpus = mc->max_cpus = + aspeed_soc_num_cpus(amc->soc_name); +}; + static const TypeInfo aspeed_machine_types[] = { { .name = MACHINE_TYPE_NAME("palmetto-bmc"), @@ -XXX,XX +XXX,XX @@ static const TypeInfo aspeed_machine_types[] = { .name = MACHINE_TYPE_NAME("tacoma-bmc"), .parent = TYPE_ASPEED_MACHINE, .class_init = aspeed_machine_tacoma_class_init, + }, { + .name = MACHINE_TYPE_NAME("g220a-bmc"), + .parent = TYPE_ASPEED_MACHINE, + .class_init = aspeed_machine_g220a_class_init, }, { .name = TYPE_ASPEED_MACHINE, .parent = TYPE_MACHINE, -- 2.26.2 From: Joel Stanley <joel@jms.id.au> On the AST2600A1, the SRAM size was increased to 89KB. Fixes: 7582591ae745 ("aspeed: Support AST2600A1 silicon revision") Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20201112012113.835858-1-joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> --- hw/arm/aspeed_ast2600.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/arm/aspeed_ast2600.c b/hw/arm/aspeed_ast2600.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_ast2600.c +++ b/hw/arm/aspeed_ast2600.c @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_ast2600_class_init(ObjectClass *oc, void *data) sc->name = "ast2600-a1"; sc->cpu_type = ARM_CPU_TYPE_NAME("cortex-a7"); sc->silicon_rev = AST2600_A1_SILICON_REV; - sc->sram_size = 0x10000; + sc->sram_size = 0x16400; sc->spis_num = 2; sc->ehcis_num = 2; sc->wdts_num = 4; -- 2.26.2 The controller can be configured to disable or enable address and data byte lanes when issuing commands. This is useful in read command mode to send SPI NOR commands that don't have an address space, such as RDID. It's a good way to have a unified read operation for registers and flash contents accesses. A new SPI driver proposed by Aspeed makes use of this feature. Add support for address lanes to start with. We will do the same for the data lanes if they are controlled one day. Cc: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-Id: <20201120161547.740806-2-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> --- hw/ssi/aspeed_smc.c | 25 ++++++++++++++++++------- 1 file changed, 18 insertions(+), 7 deletions(-) diff --git a/hw/ssi/aspeed_smc.c b/hw/ssi/aspeed_smc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/aspeed_smc.c +++ b/hw/ssi/aspeed_smc.c @@ -XXX,XX +XXX,XX @@ #define INTR_CTRL_CMD_ABORT_EN (1 << 2) #define INTR_CTRL_WRITE_PROTECT_EN (1 << 1) +/* Command Control Register */ +#define R_CE_CMD_CTRL (0x0C / 4) +#define CTRL_ADDR_BYTE0_DISABLE_SHIFT 4 +#define CTRL_DATA_BYTE0_DISABLE_SHIFT 0 + +#define aspeed_smc_addr_byte_enabled(s, i) \ + (!((s)->regs[R_CE_CMD_CTRL] & (1 << (CTRL_ADDR_BYTE0_DISABLE_SHIFT + (i))))) +#define aspeed_smc_data_byte_enabled(s, i) \ + (!((s)->regs[R_CE_CMD_CTRL] & (1 << (CTRL_DATA_BYTE0_DISABLE_SHIFT + (i))))) + /* CEx Control Register */ #define R_CTRL0 (0x10 / 4) #define CTRL_IO_QPI (1 << 31) @@ -XXX,XX +XXX,XX @@ static void aspeed_smc_flash_setup(AspeedSMCFlash *fl, uint32_t addr) { const AspeedSMCState *s = fl->controller; uint8_t cmd = aspeed_smc_flash_cmd(fl); - int i; + int i = aspeed_smc_flash_is_4byte(fl) ? 4 : 3; /* Flash access can not exceed CS segment */ addr = aspeed_smc_check_segment_addr(fl, addr); ssi_transfer(s->spi, cmd); - - if (aspeed_smc_flash_is_4byte(fl)) { - ssi_transfer(s->spi, (addr >> 24) & 0xff); + while (i--) { + if (aspeed_smc_addr_byte_enabled(s, i)) { + ssi_transfer(s->spi, (addr >> (i * 8)) & 0xff); + } } - ssi_transfer(s->spi, (addr >> 16) & 0xff); - ssi_transfer(s->spi, (addr >> 8) & 0xff); - ssi_transfer(s->spi, (addr & 0xff)); /* * Use fake transfers to model dummy bytes. The value should @@ -XXX,XX +XXX,XX @@ static uint64_t aspeed_smc_read(void *opaque, hwaddr addr, unsigned int size) (addr >= s->r_timings && addr < s->r_timings + s->ctrl->nregs_timings) || addr == s->r_ce_ctrl || + addr == R_CE_CMD_CTRL || addr == R_INTR_CTRL || addr == R_DUMMY_DATA || (s->ctrl->has_dma && addr == R_DMA_CTRL) || @@ -XXX,XX +XXX,XX @@ static void aspeed_smc_write(void *opaque, hwaddr addr, uint64_t data, if (value != s->regs[R_SEG_ADDR0 + cs]) { aspeed_smc_flash_set_segment(s, cs, value); } + } else if (addr == R_CE_CMD_CTRL) { + s->regs[addr] = value & 0xff; } else if (addr == R_DUMMY_DATA) { s->regs[addr] = value & 0xff; } else if (addr == R_INTR_CTRL) { -- 2.26.2 From: John Wang <wangzhiqiang.bj@bytedance.com> Add an eeprom device and fill it with fru information $ ipmitool fru print 0 Product Manufacturer : Bytedance Product Name : G220A Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20201210103607.556-1-wangzhiqiang.bj@bytedance.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> --- hw/arm/aspeed.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ static void g220a_bmc_i2c_init(AspeedMachineState *bmc) object_property_set_int(OBJECT(dev), "temperature0", 31000, &error_abort); object_property_set_int(OBJECT(dev), "temperature1", 28000, &error_abort); object_property_set_int(OBJECT(dev), "temperature2", 20000, &error_abort); + + static uint8_t eeprom_buf[2 * 1024] = { + 0x01, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0xfe, + 0x01, 0x06, 0x00, 0xc9, 0x42, 0x79, 0x74, 0x65, + 0x64, 0x61, 0x6e, 0x63, 0x65, 0xc5, 0x47, 0x32, + 0x32, 0x30, 0x41, 0xc4, 0x41, 0x41, 0x42, 0x42, + 0xc4, 0x43, 0x43, 0x44, 0x44, 0xc4, 0x45, 0x45, + 0x46, 0x46, 0xc4, 0x48, 0x48, 0x47, 0x47, 0xc1, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xa7, + }; + smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 4), 0x57, + eeprom_buf); } static bool aspeed_get_mmio_exec(Object *obj, Error **errp) -- 2.26.2 The following changes since commit c77283dd5d79149f4e7e9edd00f65416c648ee59: Merge tag 'pull-request-2025-07-02' of https://gitlab.com/thuth/qemu into staging (2025-07-03 06:01:41 -0400) are available in the Git repository at: https://github.com/legoater/qemu/ tags/pull-aspeed-20250704 for you to fetch changes up to 3a34dad2c0d25cebafed40696bbbdeb7ff4b9c7d: tests/functional: Add gb200 tests (2025-07-03 17:36:45 +0200) ---------------------------------------------------------------- aspeed queue: * Improved AST2700 SoC modeling (SDMC, SCU) * Fixed hardware strapping of 'bletchley-bmc' machine * Added new Meta 'catalina-bmc' machine and functional test using OpenBMC * Improved AST2600 SCU protection key modeling * Introduced AST2600 SCU unit tests * Deprecated 'ast2700a0-evb' machine * Added new NVIDIA 'gb200-bmc' machine and functional test using OpenBMC ---------------------------------------------------------------- Ed Tanous (4): hw/arm/aspeed: Add second SPI chip to Aspeed model docs: add support for gb200-bmc hw/arm/aspeed: Add GB200 BMC target tests/functional: Add gb200 tests Jamin Lin (3): hw/misc/aspeed_sdmc: Skipping dram_init in u-boot for AST2700 hw/misc/aspeed_scu: Support the Frequency Counter Control register for AST2700 aspeed: Deprecate the ast2700a0-evb machine Patrick Williams (2): hw/arm/aspeed: bletchley: update hw strap values hw/arm/aspeed: add Catalina machine type Tan Siewert (2): hw/misc/aspeed_scu: Handle AST2600 protection key registers correctly tests/qtest: Add test for ASPEED SCU docs/about/deprecated.rst | 8 + docs/system/arm/aspeed.rst | 4 +- hw/arm/aspeed_eeprom.h | 3 + include/hw/arm/aspeed.h | 2 + hw/arm/aspeed.c | 285 ++++++++++++++++++++++- hw/arm/aspeed_eeprom.c | 21 ++ hw/misc/aspeed_scu.c | 22 +- hw/misc/aspeed_sdmc.c | 3 + tests/qtest/aspeed_scu-test.c | 231 ++++++++++++++++++ hw/arm/Kconfig | 1 + tests/functional/aspeed.py | 9 +- tests/functional/meson.build | 4 + tests/functional/test_arm_aspeed_catalina.py | 25 ++ tests/functional/test_arm_aspeed_gb200nvl_bmc.py | 26 +++ tests/qtest/meson.build | 1 + 15 files changed, 636 insertions(+), 9 deletions(-) create mode 100644 tests/qtest/aspeed_scu-test.c create mode 100755 tests/functional/test_arm_aspeed_catalina.py create mode 100644 tests/functional/test_arm_aspeed_gb200nvl_bmc.py From: Jamin Lin <jamin_lin@aspeedtech.com> On AST2700 SoC, QEMU now sets BIT6 in VGA0 SCRATCH register to indicate that DDR training has completed, thus skipping the dram_init(). To align with the recent U-Boot changes, where the Main Control Register's BIT16 is checked to skip the dram_init() process, this patch sets BIT16 in the SDMC Main Control Register at reset time. This allows both the main U-Boot stage to correctly detect and bypass DRAM initialization when running under QEMU. Reference: - QEMU: https://github.com/qemu/qemu/commit/2d082fea485ee455a70ed3e963cdf9a70f34858a - U-Boot: https://github.com/AspeedTech-BMC/u-boot/commit/94e5435504fb0d8888f5c1bfd3fa284cdd6aaf9b Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Link: https://lore.kernel.org/qemu-devel/20250618080006.846355-2-jamin_lin@aspeedtech.com Signed-off-by: Cédric Le Goater <clg@redhat.com> --- hw/misc/aspeed_sdmc.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/hw/misc/aspeed_sdmc.c b/hw/misc/aspeed_sdmc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/aspeed_sdmc.c +++ b/hw/misc/aspeed_sdmc.c @@ -XXX,XX +XXX,XX @@ static void aspeed_2700_sdmc_reset(DeviceState *dev) /* Set ram size bit and defaults values */ s->regs[R_MAIN_CONF] = asc->compute_conf(s, 0); + /* Skipping dram init */ + s->regs[R_MAIN_CONTROL] = BIT(16); + if (s->unlocked) { s->regs[R_2700_PROT] = PROT_UNLOCKED; } -- 2.50.0 From: Jamin Lin <jamin_lin@aspeedtech.com> According to the datasheet: BIT[1] (SCU_FREQ_OSC_EN) enables the oscillator frequency measurement counter. BIT[6] (SCU_FREQ_DONE) indicates the measurement is finished. Firmware polls BIT[6] to determine when measurement is complete. The flag can be cleared by writing BIT[1] to 0. To simulate this hardware behavior in QEMU: If BIT[1] is set to 1, BIT[6] is immediately set to 1 to avoid firmware hanging during polling. If BIT[1] is cleared to 0, BIT[6] is also cleared to 0 to match hardware semantics. The initial value of this register is initialized to 0x80, reflecting the default value confirmed from an EVB register dump. Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Link: https://lore.kernel.org/qemu-devel/20250618080006.846355-3-jamin_lin@aspeedtech.com Signed-off-by: Cédric Le Goater <clg@redhat.com> --- hw/misc/aspeed_scu.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/hw/misc/aspeed_scu.c b/hw/misc/aspeed_scu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/aspeed_scu.c +++ b/hw/misc/aspeed_scu.c @@ -XXX,XX +XXX,XX @@ #define AST2700_SCUIO_UARTCLK_GEN TO_REG(0x330) #define AST2700_SCUIO_HUARTCLK_GEN TO_REG(0x334) #define AST2700_SCUIO_CLK_DUTY_MEAS_RST TO_REG(0x388) +#define AST2700_SCUIO_FREQ_CNT_CTL TO_REG(0x3A0) #define SCU_IO_REGION_SIZE 0x1000 @@ -XXX,XX +XXX,XX @@ static void aspeed_ast2700_scuio_write(void *opaque, hwaddr offset, s->regs[reg - 1] ^= data; updated = true; break; + case AST2700_SCUIO_FREQ_CNT_CTL: + s->regs[reg] = deposit32(s->regs[reg], 6, 1, !!(data & BIT(1))); + updated = true; + break; default: qemu_log_mask(LOG_GUEST_ERROR, "%s: Unhandled write at offset 0x%" HWADDR_PRIx "\n", @@ -XXX,XX +XXX,XX @@ static const uint32_t ast2700_a0_resets_io[ASPEED_AST2700_SCU_NR_REGS] = { [AST2700_SCUIO_UARTCLK_GEN] = 0x00014506, [AST2700_SCUIO_HUARTCLK_GEN] = 0x000145c0, [AST2700_SCUIO_CLK_DUTY_MEAS_RST] = 0x0c9100d2, + [AST2700_SCUIO_FREQ_CNT_CTL] = 0x00000080, }; static void aspeed_2700_scuio_class_init(ObjectClass *klass, const void *data) -- 2.50.0 From: Patrick Williams <patrick@stwcx.xyz> Update the Bletchley hardware strap register values per actual hardware: ``` root@bmc:~# devmem 0x1e6e2500 0x00002000 root@bmc:~# devmem 0x1e6e2510 0x00000801 ``` Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Reviewed-by: Cédric Le Goater <clg@redhat.com> Link: https://lore.kernel.org/qemu-devel/20250619035850.2682690-1-patrick@stwcx.xyz Signed-off-by: Cédric Le Goater <clg@redhat.com> --- hw/arm/aspeed.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ struct AspeedMachineState { #define FUJI_BMC_HW_STRAP2 0x00000000 /* Bletchley hardware value */ -/* TODO: Leave same as EVB for now. */ -#define BLETCHLEY_BMC_HW_STRAP1 AST2600_EVB_HW_STRAP1 -#define BLETCHLEY_BMC_HW_STRAP2 AST2600_EVB_HW_STRAP2 +#define BLETCHLEY_BMC_HW_STRAP1 0x00002000 +#define BLETCHLEY_BMC_HW_STRAP2 0x00000801 /* Qualcomm DC-SCM hardware value */ #define QCOM_DC_SCM_V1_BMC_HW_STRAP1 0x00000000 -- 2.50.0 From: Patrick Williams <patrick@stwcx.xyz> Add the 'catalina-bmc' machine type based on the kernel DTS[1] as of 6.16-rc2. The i2c model is as complete as the current QEMU models support, but in some cases I substituted devices that are close enough for present functionality. Strap registers are were verified with hardware. This has been tested with an openbmc image built from [2]. Add a functional test in line with Bletchley, pointing at an image obtained from the OpenBMC Jenkins server. [1]: https://github.com/torvalds/linux/blob/v6.16-rc2/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts [2]: https://github.com/openbmc/openbmc/commit/5bc73ec261f981d5e586bda5ac78eb0cbd5f92b0 Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Reviewed-by: Cédric Le Goater <clg@redhat.com> Link: https://lore.kernel.org/qemu-devel/20250619151458.2831859-1-patrick@stwcx.xyz Signed-off-by: Cédric Le Goater <clg@redhat.com> --- hw/arm/aspeed.c | 200 +++++++++++++++++++ hw/arm/Kconfig | 1 + tests/functional/meson.build | 2 + tests/functional/test_arm_aspeed_catalina.py | 25 +++ 4 files changed, 228 insertions(+) create mode 100755 tests/functional/test_arm_aspeed_catalina.py diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ #include "hw/i2c/i2c_mux_pca954x.h" #include "hw/i2c/smbus_eeprom.h" #include "hw/gpio/pca9552.h" +#include "hw/gpio/pca9554.h" #include "hw/nvram/eeprom_at24c.h" #include "hw/sensor/tmp105.h" #include "hw/misc/led.h" @@ -XXX,XX +XXX,XX @@ static void fuji_bmc_i2c_init(AspeedMachineState *bmc) } #define TYPE_TMP421 "tmp421" +#define TYPE_DS1338 "ds1338" + +/* Catalina hardware value */ +#define CATALINA_BMC_HW_STRAP1 0x00002002 +#define CATALINA_BMC_HW_STRAP2 0x00000800 + +#define CATALINA_BMC_RAM_SIZE ASPEED_RAM_SIZE(2 * GiB) + +static void catalina_bmc_i2c_init(AspeedMachineState *bmc) +{ + /* Reference from v6.16-rc2 aspeed-bmc-facebook-catalina.dts */ + + AspeedSoCState *soc = bmc->soc; + I2CBus *i2c[16] = {}; + I2CSlave *i2c_mux; + + /* busses 0-15 are all used. */ + for (int i = 0; i < ARRAY_SIZE(i2c); i++) { + i2c[i] = aspeed_i2c_get_bus(&soc->i2c, i); + } + + /* &i2c0 */ + /* i2c-mux@71 (PCA9546) on i2c0 */ + i2c_slave_create_simple(i2c[0], TYPE_PCA9546, 0x71); + + /* i2c-mux@72 (PCA9546) on i2c0 */ + i2c_mux = i2c_slave_create_simple(i2c[0], TYPE_PCA9546, 0x72); + + /* i2c0mux1ch1 */ + /* io_expander7 - pca9535@20 */ + i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 1), + TYPE_PCA9552, 0x20); + /* eeprom@50 */ + at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 1), 0x50, 8 * KiB); + + /* i2c-mux@73 (PCA9546) on i2c0 */ + i2c_slave_create_simple(i2c[0], TYPE_PCA9546, 0x73); + + /* i2c-mux@75 (PCA9546) on i2c0 */ + i2c_slave_create_simple(i2c[0], TYPE_PCA9546, 0x75); + + /* i2c-mux@76 (PCA9546) on i2c0 */ + i2c_mux = i2c_slave_create_simple(i2c[0], TYPE_PCA9546, 0x76); + + /* i2c0mux4ch1 */ + /* io_expander8 - pca9535@21 */ + i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 1), + TYPE_PCA9552, 0x21); + /* eeprom@50 */ + at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 1), 0x50, 8 * KiB); + + /* i2c-mux@77 (PCA9546) on i2c0 */ + i2c_slave_create_simple(i2c[0], TYPE_PCA9546, 0x77); + + + /* &i2c1 */ + /* i2c-mux@70 (PCA9548) on i2c1 */ + i2c_mux = i2c_slave_create_simple(i2c[1], TYPE_PCA9548, 0x70); + /* i2c1mux0ch0 */ + /* ina238@41 - no model */ + /* ina238@42 - no model */ + /* ina238@44 - no model */ + /* i2c1mux0ch1 */ + /* ina238@41 - no model */ + /* ina238@43 - no model */ + /* i2c1mux0ch4 */ + /* ltc4287@42 - no model */ + /* ltc4287@43 - no model */ + + /* i2c1mux0ch5 */ + /* eeprom@54 */ + at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 5), 0x54, 8 * KiB); + /* tpm75@4f */ + i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 5), TYPE_TMP75, 0x4f); + + /* i2c1mux0ch6 */ + /* io_expander5 - pca9554@27 */ + i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 6), + TYPE_PCA9554, 0x27); + /* io_expander6 - pca9555@25 */ + i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 6), + TYPE_PCA9552, 0x25); + /* eeprom@51 */ + at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 6), 0x51, 8 * KiB); + + /* i2c1mux0ch7 */ + /* eeprom@53 */ + at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 7), 0x53, 8 * KiB); + /* temperature-sensor@4b - tmp75 */ + i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 7), TYPE_TMP75, 0x4b); + + /* &i2c2 */ + /* io_expander0 - pca9555@20 */ + i2c_slave_create_simple(i2c[2], TYPE_PCA9552, 0x20); + /* io_expander0 - pca9555@21 */ + i2c_slave_create_simple(i2c[2], TYPE_PCA9552, 0x21); + /* io_expander0 - pca9555@27 */ + i2c_slave_create_simple(i2c[2], TYPE_PCA9552, 0x27); + /* eeprom@50 */ + at24c_eeprom_init(i2c[2], 0x50, 8 * KiB); + /* eeprom@51 */ + at24c_eeprom_init(i2c[2], 0x51, 8 * KiB); + + /* &i2c5 */ + /* i2c-mux@70 (PCA9548) on i2c5 */ + i2c_mux = i2c_slave_create_simple(i2c[5], TYPE_PCA9548, 0x70); + /* i2c5mux0ch6 */ + /* eeprom@52 */ + at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 6), 0x52, 8 * KiB); + /* i2c5mux0ch7 */ + /* ina230@40 - no model */ + /* ina230@41 - no model */ + /* ina230@44 - no model */ + /* ina230@45 - no model */ + + /* &i2c6 */ + /* io_expander3 - pca9555@21 */ + i2c_slave_create_simple(i2c[6], TYPE_PCA9552, 0x21); + /* rtc@6f - nct3018y */ + i2c_slave_create_simple(i2c[6], TYPE_DS1338, 0x6f); + + /* &i2c9 */ + /* io_expander4 - pca9555@4f */ + i2c_slave_create_simple(i2c[9], TYPE_PCA9552, 0x4f); + /* temperature-sensor@4b - tpm75 */ + i2c_slave_create_simple(i2c[9], TYPE_TMP75, 0x4b); + /* eeprom@50 */ + at24c_eeprom_init(i2c[9], 0x50, 8 * KiB); + /* eeprom@56 */ + at24c_eeprom_init(i2c[9], 0x56, 8 * KiB); + + /* &i2c10 */ + /* temperature-sensor@1f - tpm421 */ + i2c_slave_create_simple(i2c[10], TYPE_TMP421, 0x1f); + /* eeprom@50 */ + at24c_eeprom_init(i2c[10], 0x50, 8 * KiB); + + /* &i2c11 */ + /* ssif-bmc@10 - no model */ + + /* &i2c12 */ + /* eeprom@50 */ + at24c_eeprom_init(i2c[12], 0x50, 8 * KiB); + + /* &i2c13 */ + /* eeprom@50 */ + at24c_eeprom_init(i2c[13], 0x50, 8 * KiB); + /* eeprom@54 */ + at24c_eeprom_init(i2c[13], 0x54, 256); + /* eeprom@55 */ + at24c_eeprom_init(i2c[13], 0x55, 256); + /* eeprom@57 */ + at24c_eeprom_init(i2c[13], 0x57, 256); + + /* &i2c14 */ + /* io_expander9 - pca9555@10 */ + i2c_slave_create_simple(i2c[14], TYPE_PCA9552, 0x10); + /* io_expander10 - pca9555@11 */ + i2c_slave_create_simple(i2c[14], TYPE_PCA9552, 0x11); + /* io_expander11 - pca9555@12 */ + i2c_slave_create_simple(i2c[14], TYPE_PCA9552, 0x12); + /* io_expander12 - pca9555@13 */ + i2c_slave_create_simple(i2c[14], TYPE_PCA9552, 0x13); + /* io_expander13 - pca9555@14 */ + i2c_slave_create_simple(i2c[14], TYPE_PCA9552, 0x14); + /* io_expander14 - pca9555@15 */ + i2c_slave_create_simple(i2c[14], TYPE_PCA9552, 0x15); + + /* &i2c15 */ + /* temperature-sensor@1f - tmp421 */ + i2c_slave_create_simple(i2c[15], TYPE_TMP421, 0x1f); + /* eeprom@52 */ + at24c_eeprom_init(i2c[15], 0x52, 8 * KiB); +} static void bletchley_bmc_i2c_init(AspeedMachineState *bmc) { @@ -XXX,XX +XXX,XX @@ static void aspeed_machine_bletchley_class_init(ObjectClass *oc, aspeed_machine_class_init_cpus_defaults(mc); } +static void aspeed_machine_catalina_class_init(ObjectClass *oc, + const void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); + + mc->desc = "Facebook Catalina BMC (Cortex-A7)"; + amc->soc_name = "ast2600-a3"; + amc->hw_strap1 = CATALINA_BMC_HW_STRAP1; + amc->hw_strap2 = CATALINA_BMC_HW_STRAP2; + amc->fmc_model = "w25q01jvq"; + amc->spi_model = NULL; + amc->num_cs = 2; + amc->macs_mask = ASPEED_MAC2_ON; + amc->i2c_init = catalina_bmc_i2c_init; + mc->auto_create_sdcard = true; + mc->default_ram_size = CATALINA_BMC_RAM_SIZE; + aspeed_machine_class_init_cpus_defaults(mc); + aspeed_machine_ast2600_class_emmc_init(oc); +} + static void fby35_reset(MachineState *state, ResetType type) { AspeedMachineState *bmc = ASPEED_MACHINE(state); @@ -XXX,XX +XXX,XX @@ static const TypeInfo aspeed_machine_types[] = { .name = MACHINE_TYPE_NAME("bletchley-bmc"), .parent = TYPE_ASPEED_MACHINE, .class_init = aspeed_machine_bletchley_class_init, + }, { + .name = MACHINE_TYPE_NAME("catalina-bmc"), + .parent = TYPE_ASPEED_MACHINE, + .class_init = aspeed_machine_catalina_class_init, }, { .name = MACHINE_TYPE_NAME("fby35-bmc"), .parent = MACHINE_TYPE_NAME("ast2600-evb"), diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ASPEED_SOC select I2C select DPS310 select PCA9552 + select PCA9554 select SERIAL_MM select SMBUS_EEPROM select PCA954X diff --git a/tests/functional/meson.build b/tests/functional/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/functional/meson.build +++ b/tests/functional/meson.build @@ -XXX,XX +XXX,XX @@ test_timeouts = { 'arm_aspeed_ast2500' : 720, 'arm_aspeed_ast2600' : 1200, 'arm_aspeed_bletchley' : 480, + 'arm_aspeed_catalina' : 480, 'arm_aspeed_rainier' : 480, 'arm_bpim2u' : 500, 'arm_collie' : 180, @@ -XXX,XX +XXX,XX @@ tests_arm_system_thorough = [ 'arm_aspeed_ast2500', 'arm_aspeed_ast2600', 'arm_aspeed_bletchley', + 'arm_aspeed_catalina', 'arm_aspeed_rainier', 'arm_bpim2u', 'arm_canona1100', diff --git a/tests/functional/test_arm_aspeed_catalina.py b/tests/functional/test_arm_aspeed_catalina.py new file mode 100755 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/functional/test_arm_aspeed_catalina.py @@ -XXX,XX +XXX,XX @@ +#!/usr/bin/env python3 +# +# Functional test that boots the ASPEED machines +# +# SPDX-License-Identifier: GPL-2.0-or-later + +from qemu_test import Asset +from aspeed import AspeedTest + + +class CatalinaMachine(AspeedTest): + + ASSET_CATALINA_FLASH = Asset( + 'https://github.com/legoater/qemu-aspeed-boot/raw/a866feb5ef81245b4827a214584bf6bcc72939f6/images/catalina-bmc/obmc-phosphor-image-catalina-20250619123021.static.mtd.xz', + '287402e1ba021991e06be1d098f509444a02a3d81a73a932f66528b159e864f9') + + def test_arm_ast2600_catalina_openbmc(self): + image_path = self.uncompress(self.ASSET_CATALINA_FLASH) + + self.do_test_arm_aspeed_openbmc('catalina-bmc', image=image_path, + uboot='2019.04', cpu_id='0xf00', + soc='AST2600 rev A3') + +if __name__ == '__main__': + AspeedTest.main() -- 2.50.0 From: Tan Siewert <tan@siewert.io> The AST2600 SCU has two protection key registers (0x00 and 0x10) that both need to be unlocked. (Un-)locking 0x00 modifies both protection key registers, while modifying 0x10 only modifies itself. This commit updates the SCU write logic to reject writes unless both protection key registers are unlocked, matching the behaviour of real hardware. Signed-off-by: Tan Siewert <tan@siewert.io> Reviewed-by: Jamin Lin <jamin_lin@aspeedtech.com> Link: https://lore.kernel.org/qemu-devel/20250619085329.42125-1-tan@siewert.io Signed-off-by: Cédric Le Goater <clg@redhat.com> --- hw/misc/aspeed_scu.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/hw/misc/aspeed_scu.c b/hw/misc/aspeed_scu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/aspeed_scu.c +++ b/hw/misc/aspeed_scu.c @@ -XXX,XX +XXX,XX @@ #define BMC_DEV_ID TO_REG(0x1A4) #define AST2600_PROT_KEY TO_REG(0x00) +#define AST2600_PROT_KEY2 TO_REG(0x10) #define AST2600_SILICON_REV TO_REG(0x04) #define AST2600_SILICON_REV2 TO_REG(0x14) #define AST2600_SYS_RST_CTRL TO_REG(0x40) @@ -XXX,XX +XXX,XX @@ static void aspeed_ast2600_scu_write(void *opaque, hwaddr offset, int reg = TO_REG(offset); /* Truncate here so bitwise operations below behave as expected */ uint32_t data = data64; + bool prot_data_state = data == ASPEED_SCU_PROT_KEY; + bool unlocked = s->regs[AST2600_PROT_KEY] && s->regs[AST2600_PROT_KEY2]; if (reg >= ASPEED_AST2600_SCU_NR_REGS) { qemu_log_mask(LOG_GUEST_ERROR, @@ -XXX,XX +XXX,XX @@ static void aspeed_ast2600_scu_write(void *opaque, hwaddr offset, return; } - if (reg > PROT_KEY && !s->regs[PROT_KEY]) { + if ((reg != AST2600_PROT_KEY && reg != AST2600_PROT_KEY2) && !unlocked) { qemu_log_mask(LOG_GUEST_ERROR, "%s: SCU is locked!\n", __func__); + return; } trace_aspeed_scu_write(offset, size, data); switch (reg) { case AST2600_PROT_KEY: - s->regs[reg] = (data == ASPEED_SCU_PROT_KEY) ? 1 : 0; + /* + * Writing a value to SCU000 will modify both protection + * registers to each protection register individually. + */ + s->regs[AST2600_PROT_KEY] = prot_data_state; + s->regs[AST2600_PROT_KEY2] = prot_data_state; + return; + case AST2600_PROT_KEY2: + s->regs[AST2600_PROT_KEY2] = prot_data_state; return; case AST2600_HW_STRAP1: case AST2600_HW_STRAP2: -- 2.50.0 From: Tan Siewert <tan@siewert.io> This adds basic tests for the ASPEED System Control Unit (SCU) and its protection mechanism on the AST2500 and AST2600 platforms. The tests verify: - That SCU protection registers can be unlocked and locked again - That modifying the primary protection register on AST2600 also affects the secondary one - That writes to protected SCU registers are blocked unless protection registers are unlocked explicitly These tests ensure proper emulation of hardware locking behaviour and help catch regressions in SCU access logic. Signed-off-by: Tan Siewert <tan@siewert.io> Reviewed-by: Cédric Le Goater <clg@redhat.com> Link: https://lore.kernel.org/qemu-devel/20250630112646.74944-1-tan@siewert.io [ clg: Reordered file list in meson.build ] Signed-off-by: Cédric Le Goater <clg@redhat.com> --- tests/qtest/aspeed_scu-test.c | 231 ++++++++++++++++++++++++++++++++++ tests/qtest/meson.build | 1 + 2 files changed, 232 insertions(+) create mode 100644 tests/qtest/aspeed_scu-test.c diff --git a/tests/qtest/aspeed_scu-test.c b/tests/qtest/aspeed_scu-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/aspeed_scu-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the ASPEED AST2500 and AST2600 SCU. + * + * SPDX-License-Identifier: GPL-2.0-or-later + * Copyright (C) 2025 Tan Siewert + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +/* + * SCU base, as well as protection key are + * the same on AST2500 and 2600. + */ +#define AST_SCU_BASE 0x1E6E2000 +#define AST_SCU_PROT_LOCK_STATE 0x0 +#define AST_SCU_PROT_LOCK_VALUE 0x2 +#define AST_SCU_PROT_UNLOCK_STATE 0x1 +#define AST_SCU_PROT_UNLOCK_VALUE 0x1688A8A8 + +#define AST2500_MACHINE "-machine ast2500-evb" +#define AST2500_SCU_PROT_REG 0x00 +#define AST2500_SCU_MISC_2_CONTROL_REG 0x4C + +#define AST2600_MACHINE "-machine ast2600-evb" +/* AST2600 has two protection registers */ +#define AST2600_SCU_PROT_REG 0x000 +#define AST2600_SCU_PROT_REG2 0x010 +#define AST2600_SCU_MISC_2_CONTROL_REG 0x0C4 + +#define TEST_LOCK_ARBITRARY_VALUE 0xABCDEFAB + +/** + * Assert that a given register matches an expected value. + * + * Reads the register and checks if its value equals the expected value. + * + * @param *s - QTest machine state + * @param reg - Address of the register to be checked + * @param expected - Expected register value + */ +static inline void assert_register_eq(QTestState *s, + uint32_t reg, + uint32_t expected) +{ + uint32_t value = qtest_readl(s, reg); + g_assert_cmphex(value, ==, expected); +} + +/** + * Assert that a given register does not match a specific value. + * + * Reads the register and checks that its value is not equal to the + * provided value. + * + * @param *s - QTest machine state + * @param reg - Address of the register to be checked + * @param not_expected - Value the register must not contain + */ +static inline void assert_register_neq(QTestState *s, + uint32_t reg, + uint32_t not_expected) +{ + uint32_t value = qtest_readl(s, reg); + g_assert_cmphex(value, !=, not_expected); +} + +/** + * Test whether the SCU can be locked and unlocked correctly. + * + * When testing multiple registers, this function assumes that writing + * to the first register also affects the others. However, writing to + * any other register only affects itself. + * + * @param *machine - input machine configuration, passed directly + * to QTest + * @param regs[] - List of registers to be checked + * @param regc - amount of arguments for registers to be checked + */ +static void test_protection_register(const char *machine, + const uint32_t regs[], + const int regc) +{ + QTestState *s = qtest_init(machine); + + for (int i = 0; i < regc; i++) { + uint32_t reg = regs[i]; + + qtest_writel(s, reg, AST_SCU_PROT_UNLOCK_VALUE); + assert_register_eq(s, reg, AST_SCU_PROT_UNLOCK_STATE); + + /** + * Check that other registers are unlocked too, if more + * than one is available. + */ + if (regc > 1 && i == 0) { + /* Initialise at 1 instead of 0 to skip first */ + for (int j = 1; j < regc; j++) { + uint32_t add_reg = regs[j]; + assert_register_eq(s, add_reg, AST_SCU_PROT_UNLOCK_STATE); + } + } + + /* Lock the register again */ + qtest_writel(s, reg, AST_SCU_PROT_LOCK_VALUE); + assert_register_eq(s, reg, AST_SCU_PROT_LOCK_STATE); + + /* And the same for locked state */ + if (regc > 1 && i == 0) { + /* Initialise at 1 instead of 0 to skip first */ + for (int j = 1; j < regc; j++) { + uint32_t add_reg = regs[j]; + assert_register_eq(s, add_reg, AST_SCU_PROT_LOCK_STATE); + } + } + } + + qtest_quit(s); +} + +static void test_2500_protection_register(void) +{ + uint32_t regs[] = { AST_SCU_BASE + AST2500_SCU_PROT_REG }; + + test_protection_register(AST2500_MACHINE, + regs, + ARRAY_SIZE(regs)); +} + +static void test_2600_protection_register(void) +{ + /** + * The AST2600 has two protection registers, both + * being required to be unlocked to do any operation. + * + * Modifying SCU000 also modifies SCU010, but modifying + * SCU010 only will keep SCU000 untouched. + */ + uint32_t regs[] = { AST_SCU_BASE + AST2600_SCU_PROT_REG, + AST_SCU_BASE + AST2600_SCU_PROT_REG2 }; + + test_protection_register(AST2600_MACHINE, + regs, + ARRAY_SIZE(regs)); +} + +/** + * Test if SCU register writes are correctly allowed or blocked + * depending on the protection register state. + * + * The test first locks the protection register and verifies that + * writes to the target SCU register are rejected. It then unlocks + * the protection register and confirms that the written value is + * retained when unlocked. + * + * @param *machine - input machine configuration, passed directly + * to QTest + * @param protection_register - first SCU protection key register + * (only one for keeping it simple) + * @param test_register - Register to be used for writing arbitrary + * values + */ +static void test_write_permission_lock_state(const char *machine, + const uint32_t protection_register, + const uint32_t test_register) +{ + QTestState *s = qtest_init(machine); + + /* Arbitrary value to lock provided SCU protection register */ + qtest_writel(s, protection_register, AST_SCU_PROT_LOCK_VALUE); + + /* Ensure that the SCU is really locked */ + assert_register_eq(s, protection_register, AST_SCU_PROT_LOCK_STATE); + + /* Write a known arbitrary value to test that the write is blocked */ + qtest_writel(s, test_register, TEST_LOCK_ARBITRARY_VALUE); + + /* We do not want to have the written value to be saved */ + assert_register_neq(s, test_register, TEST_LOCK_ARBITRARY_VALUE); + + /** + * Unlock the SCU and verify that it can be written to. + * Assumes that the first SCU protection register is sufficient to + * unlock all protection registers, if multiple are present. + */ + qtest_writel(s, protection_register, AST_SCU_PROT_UNLOCK_VALUE); + assert_register_eq(s, protection_register, AST_SCU_PROT_UNLOCK_STATE); + + /* Write a known arbitrary value to test that the write works */ + qtest_writel(s, test_register, TEST_LOCK_ARBITRARY_VALUE); + + /* Ensure that the written value is retained */ + assert_register_eq(s, test_register, TEST_LOCK_ARBITRARY_VALUE); + + qtest_quit(s); +} + +static void test_2500_write_permission_lock_state(void) +{ + test_write_permission_lock_state( + AST2500_MACHINE, + AST_SCU_BASE + AST2500_SCU_PROT_REG, + AST_SCU_BASE + AST2500_SCU_MISC_2_CONTROL_REG + ); +} + +static void test_2600_write_permission_lock_state(void) +{ + test_write_permission_lock_state( + AST2600_MACHINE, + AST_SCU_BASE + AST2600_SCU_PROT_REG, + AST_SCU_BASE + AST2600_SCU_MISC_2_CONTROL_REG + ); +} + +int main(int argc, char **argv) +{ + g_test_init(&argc, &argv, NULL); + + qtest_add_func("/ast2500/scu/protection_register", + test_2500_protection_register); + qtest_add_func("/ast2600/scu/protection_register", + test_2600_protection_register); + + qtest_add_func("/ast2500/scu/write_permission_lock_state", + test_2500_write_permission_lock_state); + qtest_add_func("/ast2600/scu/write_permission_lock_state", + test_2600_write_permission_lock_state); + + return g_test_run(); +} diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_npcm8xx = \ qtests_aspeed = \ ['aspeed_gpio-test', 'aspeed_hace-test', + 'aspeed_scu-test', 'aspeed_smc-test'] qtests_aspeed64 = \ ['ast2700-gpio-test', -- 2.50.0 From: Jamin Lin <jamin_lin@aspeedtech.com> The ast2700a0-evb machine represents the first revision of the AST2700 and serves as the initial engineering sample rather than a production version. A newer revision, A1, is now supported, and the ast2700a1-evb should replace the older A0 version. Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Link: https://lore.kernel.org/qemu-devel/20250703052400.2927831-1-jamin_lin@aspeedtech.com Signed-off-by: Cédric Le Goater <clg@redhat.com> --- docs/about/deprecated.rst | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/docs/about/deprecated.rst b/docs/about/deprecated.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/about/deprecated.rst +++ b/docs/about/deprecated.rst @@ -XXX,XX +XXX,XX @@ deprecated; use the new name ``dtb-randomness`` instead. The new name better reflects the way this property affects all random data within the device tree blob, not just the ``kaslr-seed`` node. +Arm ``ast2700a0-evb`` machine (since 10.1) +'''''''''''''''''''''''''''''''''''''''''' + +The ``ast2700a0-evb`` machine represents the first revision of the AST2700 +and serves as the initial engineering sample rather than a production version. +A newer revision, A1, is now supported, and the ``ast2700a1-evb`` should +replace the older A0 version. + Mips ``mipssim`` machine (since 10.0) ''''''''''''''''''''''''''''''''''''' -- 2.50.0 From: Ed Tanous <etanous@nvidia.com> Aspeed2600 has two spi lanes; Add a new struct that can mount the second SPI. Signed-off-by: Ed Tanous <etanous@nvidia.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Link: https://lore.kernel.org/qemu-devel/20250703144249.3348879-2-etanous@nvidia.com Signed-off-by: Cédric Le Goater <clg@redhat.com> --- include/hw/arm/aspeed.h | 2 ++ hw/arm/aspeed.c | 2 ++ 2 files changed, 4 insertions(+) diff --git a/include/hw/arm/aspeed.h b/include/hw/arm/aspeed.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/aspeed.h +++ b/include/hw/arm/aspeed.h @@ -XXX,XX +XXX,XX @@ struct AspeedMachineClass { uint32_t hw_strap2; const char *fmc_model; const char *spi_model; + const char *spi2_model; uint32_t num_cs; + uint32_t num_cs2; uint32_t macs_mask; void (*i2c_init)(AspeedMachineState *bmc); uint32_t uart_default; diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ static void aspeed_machine_init(MachineState *machine) aspeed_board_init_flashes(&bmc->soc->spi[0], bmc->spi_model ? bmc->spi_model : amc->spi_model, 1, amc->num_cs); + aspeed_board_init_flashes(&bmc->soc->spi[1], + amc->spi2_model, 1, amc->num_cs2); } if (machine->kernel_filename && sc->num_cpus > 1) { -- 2.50.0 From: Ed Tanous <etanous@nvidia.com> This patch updates the docs for support of gb200-bmc. Signed-off-by: Ed Tanous <etanous@nvidia.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Link: https://lore.kernel.org/qemu-devel/20250703144249.3348879-3-etanous@nvidia.com Signed-off-by: Cédric Le Goater <clg@redhat.com> --- docs/system/arm/aspeed.rst | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/docs/system/arm/aspeed.rst b/docs/system/arm/aspeed.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/aspeed.rst +++ b/docs/system/arm/aspeed.rst @@ -XXX,XX +XXX,XX @@ -Aspeed family boards (``ast2500-evb``, ``ast2600-evb``, ``ast2700-evb``, ``bletchley-bmc``, ``fuji-bmc``, ``fby35-bmc``, ``fp5280g2-bmc``, ``g220a-bmc``, ``palmetto-bmc``, ``qcom-dc-scm-v1-bmc``, ``qcom-firework-bmc``, ``quanta-q71l-bmc``, ``rainier-bmc``, ``romulus-bmc``, ``sonorapass-bmc``, ``supermicrox11-bmc``, ``supermicrox11spi-bmc``, ``tiogapass-bmc``, ``witherspoon-bmc``, ``yosemitev2-bmc``) -================================================================================================================================================================================================================================================================================================================================================================================================================================= +Aspeed family boards (``ast2500-evb``, ``ast2600-evb``, ``ast2700-evb``, ``bletchley-bmc``, ``fuji-bmc``, ``gb200nvl-bmc``, ``fby35-bmc``, ``fp5280g2-bmc``, ``g220a-bmc``, ``palmetto-bmc``, ``qcom-dc-scm-v1-bmc``, ``qcom-firework-bmc``, ``quanta-q71l-bmc``, ``rainier-bmc``, ``romulus-bmc``, ``sonorapass-bmc``, ``supermicrox11-bmc``, ``supermicrox11spi-bmc``, ``tiogapass-bmc``, ``witherspoon-bmc``, ``yosemitev2-bmc``) The QEMU Aspeed machines model BMCs of various OpenPOWER systems and Aspeed evaluation boards. They are based on different releases of the @@ -XXX,XX +XXX,XX @@ AST2600 SoC based machines : - ``fuji-bmc`` Facebook Fuji BMC - ``bletchley-bmc`` Facebook Bletchley BMC - ``fby35-bmc`` Facebook fby35 BMC +- ``gb200nvl-bmc`` Nvidia GB200nvl BMC - ``qcom-dc-scm-v1-bmc`` Qualcomm DC-SCM V1 BMC - ``qcom-firework-bmc`` Qualcomm Firework BMC -- 2.50.0 From: Ed Tanous <etanous@nvidia.com> GB200nvl72 is a system for for accelerated compute. This is a model for the BMC target within the system. This is based on the device tree aspeed-bmc-nvidia-gb200nvl-bmc.dts from: [1] https://github.com/openbmc/linux/blob/dev-6.6/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts Signed-off-by: Ed Tanous <etanous@nvidia.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Link: https://lore.kernel.org/qemu-devel/20250703144249.3348879-4-etanous@nvidia.com Signed-off-by: Cédric Le Goater <clg@redhat.com> --- hw/arm/aspeed_eeprom.h | 3 ++ hw/arm/aspeed.c | 78 ++++++++++++++++++++++++++++++++++++++++++ hw/arm/aspeed_eeprom.c | 21 ++++++++++++ 3 files changed, 102 insertions(+) diff --git a/hw/arm/aspeed_eeprom.h b/hw/arm/aspeed_eeprom.h index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_eeprom.h +++ b/hw/arm/aspeed_eeprom.h @@ -XXX,XX +XXX,XX @@ extern const size_t rainier_bb_fruid_len; extern const uint8_t rainier_bmc_fruid[]; extern const size_t rainier_bmc_fruid_len; +extern const uint8_t gb200nvl_bmc_fruid[]; +extern const size_t gb200nvl_bmc_fruid_len; + #endif diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ struct AspeedMachineState { #define BLETCHLEY_BMC_HW_STRAP1 0x00002000 #define BLETCHLEY_BMC_HW_STRAP2 0x00000801 +/* GB200NVL hardware value */ +#define GB200NVL_BMC_HW_STRAP1 AST2600_EVB_HW_STRAP1 +#define GB200NVL_BMC_HW_STRAP2 AST2600_EVB_HW_STRAP2 + /* Qualcomm DC-SCM hardware value */ #define QCOM_DC_SCM_V1_BMC_HW_STRAP1 0x00000000 #define QCOM_DC_SCM_V1_BMC_HW_STRAP2 0x00000041 @@ -XXX,XX +XXX,XX @@ static void create_pca9552(AspeedSoCState *soc, int bus_id, int addr) TYPE_PCA9552, addr); } +static I2CSlave *create_pca9554(AspeedSoCState *soc, int bus_id, int addr) +{ + return i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, bus_id), + TYPE_PCA9554, addr); +} + static void sonorapass_bmc_i2c_init(AspeedMachineState *bmc) { AspeedSoCState *soc = bmc->soc; @@ -XXX,XX +XXX,XX @@ static void bletchley_bmc_i2c_init(AspeedMachineState *bmc) i2c_slave_create_simple(i2c[12], TYPE_PCA9552, 0x67); } + +static void gb200nvl_bmc_i2c_init(AspeedMachineState *bmc) +{ + AspeedSoCState *soc = bmc->soc; + I2CBus *i2c[15] = {}; + DeviceState *dev; + for (int i = 0; i < sizeof(i2c) / sizeof(i2c[0]); i++) { + if ((i == 11) || (i == 12) || (i == 13)) { + continue; + } + i2c[i] = aspeed_i2c_get_bus(&soc->i2c, i); + } + + /* Bus 5 Expander */ + create_pca9554(soc, 4, 0x21); + + /* Mux I2c Expanders */ + i2c_slave_create_simple(i2c[5], "pca9546", 0x71); + i2c_slave_create_simple(i2c[5], "pca9546", 0x72); + i2c_slave_create_simple(i2c[5], "pca9546", 0x73); + i2c_slave_create_simple(i2c[5], "pca9546", 0x75); + i2c_slave_create_simple(i2c[5], "pca9546", 0x76); + i2c_slave_create_simple(i2c[5], "pca9546", 0x77); + + /* Bus 10 */ + dev = DEVICE(create_pca9554(soc, 9, 0x20)); + + /* Set FPGA_READY */ + object_property_set_str(OBJECT(dev), "pin1", "high", &error_fatal); + + create_pca9554(soc, 9, 0x21); + at24c_eeprom_init(i2c[9], 0x50, 64 * KiB); + at24c_eeprom_init(i2c[9], 0x51, 64 * KiB); + + /* Bus 11 */ + at24c_eeprom_init_rom(i2c[10], 0x50, 256, gb200nvl_bmc_fruid, + gb200nvl_bmc_fruid_len); +} + static void fby35_i2c_init(AspeedMachineState *bmc) { AspeedSoCState *soc = bmc->soc; @@ -XXX,XX +XXX,XX @@ static void aspeed_machine_catalina_class_init(ObjectClass *oc, aspeed_machine_ast2600_class_emmc_init(oc); } +#define GB200NVL_BMC_RAM_SIZE ASPEED_RAM_SIZE(1 * GiB) + +static void aspeed_machine_gb200nvl_class_init(ObjectClass *oc, + const void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); + + mc->desc = "Nvidia GB200NVL BMC (Cortex-A7)"; + amc->soc_name = "ast2600-a3"; + amc->hw_strap1 = GB200NVL_BMC_HW_STRAP1; + amc->hw_strap2 = GB200NVL_BMC_HW_STRAP2; + amc->fmc_model = "mx66u51235f"; + amc->spi_model = "mx66u51235f"; + amc->num_cs = 2; + + amc->spi2_model = "mx66u51235f"; + amc->num_cs2 = 1; + amc->macs_mask = ASPEED_MAC0_ON | ASPEED_MAC1_ON; + amc->i2c_init = gb200nvl_bmc_i2c_init; + mc->default_ram_size = GB200NVL_BMC_RAM_SIZE; + aspeed_machine_class_init_cpus_defaults(mc); + aspeed_machine_ast2600_class_emmc_init(oc); +} + static void fby35_reset(MachineState *state, ResetType type) { AspeedMachineState *bmc = ASPEED_MACHINE(state); @@ -XXX,XX +XXX,XX @@ static const TypeInfo aspeed_machine_types[] = { .name = MACHINE_TYPE_NAME("bletchley-bmc"), .parent = TYPE_ASPEED_MACHINE, .class_init = aspeed_machine_bletchley_class_init, + }, { + .name = MACHINE_TYPE_NAME("gb200nvl-bmc"), + .parent = TYPE_ASPEED_MACHINE, + .class_init = aspeed_machine_gb200nvl_class_init, }, { .name = MACHINE_TYPE_NAME("catalina-bmc"), .parent = TYPE_ASPEED_MACHINE, diff --git a/hw/arm/aspeed_eeprom.c b/hw/arm/aspeed_eeprom.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_eeprom.c +++ b/hw/arm/aspeed_eeprom.c @@ -XXX,XX +XXX,XX @@ const uint8_t rainier_bmc_fruid[] = { 0x31, 0x50, 0x46, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, }; +const uint8_t gb200nvl_bmc_fruid[] = { + 0x01, 0x00, 0x00, 0x01, 0x0b, 0x00, 0x00, 0xf3, 0x01, 0x0a, 0x19, 0x1f, + 0x0f, 0xe6, 0xc6, 0x4e, 0x56, 0x49, 0x44, 0x49, 0x41, 0xc5, 0x50, 0x33, + 0x38, 0x30, 0x39, 0xcd, 0x31, 0x35, 0x38, 0x33, 0x33, 0x32, 0x34, 0x38, + 0x30, 0x30, 0x31, 0x35, 0x30, 0xd2, 0x36, 0x39, 0x39, 0x2d, 0x31, 0x33, + 0x38, 0x30, 0x39, 0x2d, 0x30, 0x34, 0x30, 0x34, 0x2d, 0x36, 0x30, 0x30, + 0xc0, 0x01, 0x01, 0xd6, 0x4d, 0x41, 0x43, 0x3a, 0x20, 0x33, 0x43, 0x3a, + 0x36, 0x44, 0x3a, 0x36, 0x36, 0x3a, 0x31, 0x34, 0x3a, 0x43, 0x38, 0x3a, + 0x37, 0x41, 0xc1, 0x3b, 0x01, 0x09, 0x19, 0xc6, 0x4e, 0x56, 0x49, 0x44, + 0x49, 0x41, 0xc9, 0x50, 0x33, 0x38, 0x30, 0x39, 0x2d, 0x42, 0x4d, 0x43, + 0xd2, 0x36, 0x39, 0x39, 0x2d, 0x31, 0x33, 0x38, 0x30, 0x39, 0x2d, 0x30, + 0x34, 0x30, 0x34, 0x2d, 0x36, 0x30, 0x30, 0xc4, 0x41, 0x45, 0x2e, 0x31, + 0xcd, 0x31, 0x35, 0x38, 0x33, 0x33, 0x32, 0x34, 0x38, 0x30, 0x30, 0x31, + 0x35, 0x30, 0xc0, 0xc4, 0x76, 0x30, 0x2e, 0x31, 0xc1, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0xb4, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff + +}; + const size_t tiogapass_bmc_fruid_len = sizeof(tiogapass_bmc_fruid); const size_t fby35_nic_fruid_len = sizeof(fby35_nic_fruid); const size_t fby35_bb_fruid_len = sizeof(fby35_bb_fruid); @@ -XXX,XX +XXX,XX @@ const size_t fby35_bmc_fruid_len = sizeof(fby35_bmc_fruid); const size_t yosemitev2_bmc_fruid_len = sizeof(yosemitev2_bmc_fruid); const size_t rainier_bb_fruid_len = sizeof(rainier_bb_fruid); const size_t rainier_bmc_fruid_len = sizeof(rainier_bmc_fruid); +const size_t gb200nvl_bmc_fruid_len = sizeof(gb200nvl_bmc_fruid); + -- 2.50.0 From: Ed Tanous <etanous@nvidia.com> To support the newly added gb200 machine, add appropriate tests and extend do_test_arm_aspeed_openbmc() to support the hostname of this new system: "gb200nvl-obmc". Signed-off-by: Ed Tanous <etanous@nvidia.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Link: https://lore.kernel.org/qemu-devel/20250703144249.3348879-5-etanous@nvidia.com [ clg: Adjust commit log to document do_test_arm_aspeed_openbmc() change ] Signed-off-by: Cédric Le Goater <clg@redhat.com> --- tests/functional/aspeed.py | 9 +++++-- tests/functional/meson.build | 2 ++ .../test_arm_aspeed_gb200nvl_bmc.py | 26 +++++++++++++++++++ 3 files changed, 35 insertions(+), 2 deletions(-) create mode 100644 tests/functional/test_arm_aspeed_gb200nvl_bmc.py diff --git a/tests/functional/aspeed.py b/tests/functional/aspeed.py index XXXXXXX..XXXXXXX 100644 --- a/tests/functional/aspeed.py +++ b/tests/functional/aspeed.py @@ -XXX,XX +XXX,XX @@ class AspeedTest(LinuxKernelTest): def do_test_arm_aspeed_openbmc(self, machine, image, uboot='2019.04', - cpu_id='0x0', soc='AST2500 rev A1'): - hostname = machine.removesuffix('-bmc') + cpu_id='0x0', soc='AST2500 rev A1', + image_hostname=None): + # Allow for the image hostname to not end in "-bmc" + if image_hostname is not None: + hostname = image_hostname + else: + hostname = machine.removesuffix('-bmc') self.set_machine(machine) self.vm.set_console() diff --git a/tests/functional/meson.build b/tests/functional/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/functional/meson.build +++ b/tests/functional/meson.build @@ -XXX,XX +XXX,XX @@ test_timeouts = { 'arm_aspeed_ast2600' : 1200, 'arm_aspeed_bletchley' : 480, 'arm_aspeed_catalina' : 480, + 'arm_aspeed_gb200nvl_bmc' : 480, 'arm_aspeed_rainier' : 480, 'arm_bpim2u' : 500, 'arm_collie' : 180, @@ -XXX,XX +XXX,XX @@ tests_arm_system_thorough = [ 'arm_aspeed_ast2600', 'arm_aspeed_bletchley', 'arm_aspeed_catalina', + 'arm_aspeed_gb200nvl_bmc', 'arm_aspeed_rainier', 'arm_bpim2u', 'arm_canona1100', diff --git a/tests/functional/test_arm_aspeed_gb200nvl_bmc.py b/tests/functional/test_arm_aspeed_gb200nvl_bmc.py new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/functional/test_arm_aspeed_gb200nvl_bmc.py @@ -XXX,XX +XXX,XX @@ +#!/usr/bin/env python3 +# +# Functional test that boots the ASPEED machines +# +# SPDX-License-Identifier: GPL-2.0-or-later + +from qemu_test import Asset +from aspeed import AspeedTest + + +class GB200Machine(AspeedTest): + + ASSET_GB200_FLASH = Asset( + 'https://github.com/legoater/qemu-aspeed-boot/raw/refs/heads/master/images/gb200nvl-obmc/obmc-phosphor-image-gb200nvl-obmc-20250702182348.static.mtd.xz', + 'b84819317cb3dc762895ad507705978ef000bfc77c50c33a63bdd37921db0dbc') + + def test_arm_aspeed_gb200_openbmc(self): + image_path = self.uncompress(self.ASSET_GB200_FLASH) + + self.do_test_arm_aspeed_openbmc('gb200nvl-bmc', image=image_path, + uboot='2019.04', cpu_id='0xf00', + soc='AST2600 rev A3', + image_hostname='gb200nvl-obmc') + +if __name__ == '__main__': + AspeedTest.main() -- 2.50.0