Series comparison

The following changes since commit 4c41341af76cfc85b5a6c0f87de4838672ab9f89:

Merge remote-tracking branch 'remotes/aperard/tags/pull-xen-20201020' into staging (2020-10-20 11:20:36 +0100)

are available in the Git repository at:

https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20201020

for you to fetch changes up to 6358890cb939192f6169fdf7664d903bf9b1d338:

tests/tcg/aarch64: Add bti smoke tests (2020-10-20 16:12:02 +0100)

----------------------------------------------------------------
target-arm queue:
 * Fix AArch32 SMLAD incorrect setting of Q bit
 * AArch32 VCVT fixed-point to float is always round-to-nearest
 * strongarm: Fix 'time to transmit a char' unit comment
 * Restrict APEI tables generation to the 'virt' machine
 * bcm2835: minor code cleanups
 * correctly flush TLBs when TBI is enabled
 * tests/qtest: Add npcm7xx timer test
 * loads-stores.rst: add footnote that clarifies GETPC usage
 * Fix reported EL for mte_check_fail
 * Ignore HCR_EL2.ATA when {E2H,TGE} != 11
 * microbit_i2c: Fix coredump when dump-vmstate
 * nseries: Fix loading kernel image on n8x0 machines
 * Implement v8.1M low-overhead-loops
 * linux-user: Support AArch64 BTI

----------------------------------------------------------------
Emanuele Giuseppe Esposito (1):
      loads-stores.rst: add footnote that clarifies GETPC usage

Havard Skinnemoen (1):
      tests/qtest: Add npcm7xx timer test

Peng Liang (1):
      microbit_i2c: Fix coredump when dump-vmstate

Peter Maydell (12):
      target/arm: Fix SMLAD incorrect setting of Q bit
      target/arm: AArch32 VCVT fixed-point to float is always round-to-nearest
      decodetree: Fix codegen for non-overlapping group inside overlapping group
      target/arm: Implement v8.1M NOCP handling
      target/arm: Implement v8.1M conditional-select insns
      target/arm: Make the t32 insn[25:23]=111 group non-overlapping
      target/arm: Don't allow BLX imm for M-profile
      target/arm: Implement v8.1M branch-future insns (as NOPs)
      target/arm: Implement v8.1M low-overhead-loop instructions
      target/arm: Fix has_vfp/has_neon ID reg squashing for M-profile
      target/arm: Allow M-profile CPUs with FP16 to set FPSCR.FP16
      target/arm: Implement FPSCR.LTPSIZE for M-profile LOB extension

Philippe Mathieu-Daudé (10):
      hw/arm/strongarm: Fix 'time to transmit a char' unit comment
      hw/arm: Restrict APEI tables generation to the 'virt' machine
      hw/timer/bcm2835: Introduce BCM2835_SYSTIMER_COUNT definition
      hw/timer/bcm2835: Rename variable holding CTRL_STATUS register
      hw/timer/bcm2835: Support the timer COMPARE registers
      hw/arm/bcm2835_peripherals: Correctly wire the SYS_timer IRQs
      hw/intc/bcm2835_ic: Trace GPU/CPU IRQ handlers
      hw/intc/bcm2836_control: Use IRQ definitions instead of magic numbers
      hw/arm/nseries: Fix loading kernel image on n8x0 machines
      linux-user/elfload: Avoid leaking interp_name using GLib memory API

Richard Henderson (16):
      accel/tcg: Add tlb_flush_page_bits_by_mmuidx*
      target/arm: Use tlb_flush_page_bits_by_mmuidx*
      target/arm: Remove redundant mmu_idx lookup
      target/arm: Fix reported EL for mte_check_fail
      target/arm: Ignore HCR_EL2.ATA when {E2H,TGE} != 11
      linux-user/aarch64: Reset btype for signals
      linux-user: Set PAGE_TARGET_1 for TARGET_PROT_BTI
      include/elf: Add defines related to GNU property notes for AArch64
      linux-user/elfload: Fix coding style in load_elf_image
      linux-user/elfload: Adjust iteration over phdr
      linux-user/elfload: Move PT_INTERP detection to first loop
      linux-user/elfload: Use Error for load_elf_image
      linux-user/elfload: Use Error for load_elf_interp
      linux-user/elfload: Parse NT_GNU_PROPERTY_TYPE_0 notes
      linux-user/elfload: Parse GNU_PROPERTY_AARCH64_FEATURE_1_AND
      tests/tcg/aarch64: Add bti smoke tests

The SMLAD instruction is supposed to:
 * signed multiply Rn[15:0] * Rm[15:0]
 * signed multiply Rn[31:16] * Rm[31:16]
 * perform a signed addition of the products and Ra
 * set Rd to the low 32 bits of the theoretical
   infinite-precision result
 * set the Q flag if the sign-extension of Rd
   would differ from the infinite-precision result
   (ie on overflow)

Our current implementation doesn't quite do this, though: it performs
an addition of the products setting Q on overflow, and then it adds
Ra, again possibly setting Q.  This sometimes incorrectly sets Q when
the architecturally mandated only-check-for-overflow-once algorithm
does not. For instance:
 r1 = 0x80008000; r2 = 0x80008000; r3 = 0xffffffff
 smlad r0, r1, r2, r3
This is (-32768 * -32768) + (-32768 * -32768) - 1

The products are both 0x4000_0000, so when added together as 32-bit
signed numbers they overflow (and QEMU sets Q), but because the
addition of Ra == -1 brings the total back down to 0x7fff_ffff
there is no overflow for the complete operation and setting Q is
incorrect.

Fix this edge case by resorting to 64-bit arithmetic for the
case where we need to add three values together.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201009144712.11187-1-peter.maydell@linaro.org
---
 target/arm/translate.c | 58 ++++++++++++++++++++++++++++++++++--------
 1 file changed, 48 insertions(+), 10 deletions(-)

diff --git a/target/arm/translate.c b/target/arm/translate.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/translate.c
+++ b/target/arm/translate.c
@@ -XXX,XX +XXX,XX @@ static bool op_smlad(DisasContext *s, arg_rrrr *a, bool m_swap, bool sub)
     gen_smul_dual(t1, t2);
 
     if (sub) {
-        /* This subtraction cannot overflow. */
+        /*
+         * This subtraction cannot overflow, so we can do a simple
+         * 32-bit subtraction and then a possible 32-bit saturating
+         * addition of Ra.
+         */
         tcg_gen_sub_i32(t1, t1, t2);
+        tcg_temp_free_i32(t2);
+
+        if (a->ra != 15) {
+            t2 = load_reg(s, a->ra);
+            gen_helper_add_setq(t1, cpu_env, t1, t2);
+            tcg_temp_free_i32(t2);
+        }
+    } else if (a->ra == 15) {
+        /* Single saturation-checking addition */
+        gen_helper_add_setq(t1, cpu_env, t1, t2);
+        tcg_temp_free_i32(t2);
     } else {
         /*
-         * This addition cannot overflow 32 bits; however it may
-         * overflow considered as a signed operation, in which case
-         * we must set the Q flag.
+         * We need to add the products and Ra together and then
+         * determine whether the final result overflowed. Doing
+         * this as two separate add-and-check-overflow steps incorrectly
+         * sets Q for cases like (-32768 * -32768) + (-32768 * -32768) + -1.
+         * Do all the arithmetic at 64-bits and then check for overflow.
          */
-        gen_helper_add_setq(t1, cpu_env, t1, t2);
-    }
-    tcg_temp_free_i32(t2);
+        TCGv_i64 p64, q64;
+        TCGv_i32 t3, qf, one;
 
-    if (a->ra != 15) {
-        t2 = load_reg(s, a->ra);
-        gen_helper_add_setq(t1, cpu_env, t1, t2);
+        p64 = tcg_temp_new_i64();
+        q64 = tcg_temp_new_i64();
+        tcg_gen_ext_i32_i64(p64, t1);
+        tcg_gen_ext_i32_i64(q64, t2);
+        tcg_gen_add_i64(p64, p64, q64);
+        load_reg_var(s, t2, a->ra);
+        tcg_gen_ext_i32_i64(q64, t2);
+        tcg_gen_add_i64(p64, p64, q64);
+        tcg_temp_free_i64(q64);
+
+        tcg_gen_extr_i64_i32(t1, t2, p64);
+        tcg_temp_free_i64(p64);
+        /*
+         * t1 is the low half of the result which goes into Rd.
+         * We have overflow and must set Q if the high half (t2)
+         * is different from the sign-extension of t1.
+         */
+        t3 = tcg_temp_new_i32();
+        tcg_gen_sari_i32(t3, t1, 31);
+        qf = load_cpu_field(QF);
+        one = tcg_const_i32(1);
+        tcg_gen_movcond_i32(TCG_COND_NE, qf, t2, t3, one, qf);
+        store_cpu_field(qf, QF);
+        tcg_temp_free_i32(one);
+        tcg_temp_free_i32(t3);
         tcg_temp_free_i32(t2);
     }
     store_reg(s, a->rd, t1);
-- 
2.20.1

For AArch32, unlike the VCVT of integer to float, which honours the
rounding mode specified by the FPSCR, VCVT of fixed-point to float is
always round-to-nearest. (AArch64 fixed-point-to-float conversions
always honour the FPCR rounding mode.)

Implement this by providing _round_to_nearest versions of the
relevant helpers which set the rounding mode temporarily when making
the call to the underlying softfloat function.

We only need to change the VFP VCVT instructions, because the
standard- FPSCR value used by the Neon VCVT is always set to
round-to-nearest, so we don't need to do the extra work of saving
and restoring the rounding mode.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201013103532.13391-1-peter.maydell@linaro.org
---
 target/arm/helper.h            | 13 +++++++++++++
 target/arm/vfp_helper.c        | 23 ++++++++++++++++++++++-
 target/arm/translate-vfp.c.inc | 24 ++++++++++++------------
 3 files changed, 47 insertions(+), 13 deletions(-)

diff --git a/target/arm/helper.h b/target/arm/helper.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/helper.h
+++ b/target/arm/helper.h
@@ -XXX,XX +XXX,XX @@ DEF_HELPER_3(vfp_ultoh, f16, i32, i32, ptr)
 DEF_HELPER_3(vfp_sqtoh, f16, i64, i32, ptr)
 DEF_HELPER_3(vfp_uqtoh, f16, i64, i32, ptr)
 
+DEF_HELPER_3(vfp_shtos_round_to_nearest, f32, i32, i32, ptr)
+DEF_HELPER_3(vfp_sltos_round_to_nearest, f32, i32, i32, ptr)
+DEF_HELPER_3(vfp_uhtos_round_to_nearest, f32, i32, i32, ptr)
+DEF_HELPER_3(vfp_ultos_round_to_nearest, f32, i32, i32, ptr)
+DEF_HELPER_3(vfp_shtod_round_to_nearest, f64, i64, i32, ptr)
+DEF_HELPER_3(vfp_sltod_round_to_nearest, f64, i64, i32, ptr)
+DEF_HELPER_3(vfp_uhtod_round_to_nearest, f64, i64, i32, ptr)
+DEF_HELPER_3(vfp_ultod_round_to_nearest, f64, i64, i32, ptr)
+DEF_HELPER_3(vfp_shtoh_round_to_nearest, f16, i32, i32, ptr)
+DEF_HELPER_3(vfp_uhtoh_round_to_nearest, f16, i32, i32, ptr)
+DEF_HELPER_3(vfp_sltoh_round_to_nearest, f16, i32, i32, ptr)
+DEF_HELPER_3(vfp_ultoh_round_to_nearest, f16, i32, i32, ptr)
+
 DEF_HELPER_FLAGS_2(set_rmode, TCG_CALL_NO_RWG, i32, i32, ptr)
 
 DEF_HELPER_FLAGS_3(vfp_fcvt_f16_to_f32, TCG_CALL_NO_RWG, f32, f16, ptr, i32)
diff --git a/target/arm/vfp_helper.c b/target/arm/vfp_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/vfp_helper.c
+++ b/target/arm/vfp_helper.c
@@ -XXX,XX +XXX,XX @@ float32 VFP_HELPER(fcvts, d)(float64 x, CPUARMState *env)
     return float64_to_float32(x, &env->vfp.fp_status);
 }
 
-/* VFP3 fixed point conversion.  */
+/*
+ * VFP3 fixed point conversion. The AArch32 versions of fix-to-float
+ * must always round-to-nearest; the AArch64 ones honour the FPSCR
+ * rounding mode. (For AArch32 Neon the standard-FPSCR is set to
+ * round-to-nearest so either helper will work.) AArch32 float-to-fix
+ * must round-to-zero.
+ */
 #define VFP_CONV_FIX_FLOAT(name, p, fsz, ftype, isz, itype)            \
 ftype HELPER(vfp_##name##to##p)(uint##isz##_t  x, uint32_t shift,      \
                                      void *fpstp) \
 { return itype##_to_##float##fsz##_scalbn(x, -shift, fpstp); }
 
+#define VFP_CONV_FIX_FLOAT_ROUND(name, p, fsz, ftype, isz, itype)      \
+    ftype HELPER(vfp_##name##to##p##_round_to_nearest)(uint##isz##_t  x, \
+                                                     uint32_t shift,   \
+                                                     void *fpstp)      \
+    {                                                                  \
+        ftype ret;                                                     \
+        float_status *fpst = fpstp;                                    \
+        FloatRoundMode oldmode = fpst->float_rounding_mode;            \
+        fpst->float_rounding_mode = float_round_nearest_even;          \
+        ret = itype##_to_##float##fsz##_scalbn(x, -shift, fpstp);      \
+        fpst->float_rounding_mode = oldmode;                           \
+        return ret;                                                    \
+    }
+
 #define VFP_CONV_FLOAT_FIX_ROUND(name, p, fsz, ftype, isz, itype, ROUND, suff) \
 uint##isz##_t HELPER(vfp_to##name##p##suff)(ftype x, uint32_t shift,      \
                                             void *fpst)                   \
@@ -XXX,XX +XXX,XX @@ uint##isz##_t HELPER(vfp_to##name##p##suff)(ftype x, uint32_t shift,      \
 
 #define VFP_CONV_FIX(name, p, fsz, ftype, isz, itype)            \
 VFP_CONV_FIX_FLOAT(name, p, fsz, ftype, isz, itype)              \
+VFP_CONV_FIX_FLOAT_ROUND(name, p, fsz, ftype, isz, itype)        \
 VFP_CONV_FLOAT_FIX_ROUND(name, p, fsz, ftype, isz, itype,        \
                          float_round_to_zero, _round_to_zero)    \
 VFP_CONV_FLOAT_FIX_ROUND(name, p, fsz, ftype, isz, itype,        \
diff --git a/target/arm/translate-vfp.c.inc b/target/arm/translate-vfp.c.inc
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/translate-vfp.c.inc
+++ b/target/arm/translate-vfp.c.inc
@@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_fix_hp(DisasContext *s, arg_VCVT_fix_sp *a)
     /* Switch on op:U:sx bits */
     switch (a->opc) {
     case 0:
-        gen_helper_vfp_shtoh(vd, vd, shift, fpst);
+        gen_helper_vfp_shtoh_round_to_nearest(vd, vd, shift, fpst);
         break;
     case 1:
-        gen_helper_vfp_sltoh(vd, vd, shift, fpst);
+        gen_helper_vfp_sltoh_round_to_nearest(vd, vd, shift, fpst);
         break;
     case 2:
-        gen_helper_vfp_uhtoh(vd, vd, shift, fpst);
+        gen_helper_vfp_uhtoh_round_to_nearest(vd, vd, shift, fpst);
         break;
     case 3:
-        gen_helper_vfp_ultoh(vd, vd, shift, fpst);
+        gen_helper_vfp_ultoh_round_to_nearest(vd, vd, shift, fpst);
         break;
     case 4:
         gen_helper_vfp_toshh_round_to_zero(vd, vd, shift, fpst);
@@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_fix_sp(DisasContext *s, arg_VCVT_fix_sp *a)
     /* Switch on op:U:sx bits */
     switch (a->opc) {
     case 0:
-        gen_helper_vfp_shtos(vd, vd, shift, fpst);
+        gen_helper_vfp_shtos_round_to_nearest(vd, vd, shift, fpst);
         break;
     case 1:
-        gen_helper_vfp_sltos(vd, vd, shift, fpst);
+        gen_helper_vfp_sltos_round_to_nearest(vd, vd, shift, fpst);
         break;
     case 2:
-        gen_helper_vfp_uhtos(vd, vd, shift, fpst);
+        gen_helper_vfp_uhtos_round_to_nearest(vd, vd, shift, fpst);
         break;
     case 3:
-        gen_helper_vfp_ultos(vd, vd, shift, fpst);
+        gen_helper_vfp_ultos_round_to_nearest(vd, vd, shift, fpst);
         break;
     case 4:
         gen_helper_vfp_toshs_round_to_zero(vd, vd, shift, fpst);
@@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_fix_dp(DisasContext *s, arg_VCVT_fix_dp *a)
     /* Switch on op:U:sx bits */
     switch (a->opc) {
     case 0:
-        gen_helper_vfp_shtod(vd, vd, shift, fpst);
+        gen_helper_vfp_shtod_round_to_nearest(vd, vd, shift, fpst);
         break;
     case 1:
-        gen_helper_vfp_sltod(vd, vd, shift, fpst);
+        gen_helper_vfp_sltod_round_to_nearest(vd, vd, shift, fpst);
         break;
     case 2:
-        gen_helper_vfp_uhtod(vd, vd, shift, fpst);
+        gen_helper_vfp_uhtod_round_to_nearest(vd, vd, shift, fpst);
         break;
     case 3:
-        gen_helper_vfp_ultod(vd, vd, shift, fpst);
+        gen_helper_vfp_ultod_round_to_nearest(vd, vd, shift, fpst);
         break;
     case 4:
         gen_helper_vfp_toshd_round_to_zero(vd, vd, shift, fpst);
-- 
2.20.1

From: Philippe Mathieu-Daudé <philmd@redhat.com>

While APEI is a generic ACPI feature (usable by X86 and ARM64), only
the 'virt' machine uses it, by enabling the RAS Virtualization. See
commit 2afa8c8519: "hw/arm/virt: Introduce a RAS machine option").

Restrict the APEI tables generation code to the single user: the virt
machine. If another machine wants to use it, it simply has to 'select
ACPI_APEI' in its Kconfig.

Fixes: aa16508f1d ("ACPI: Build related register address fields via hardware error fw_cfg blob")
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Dongjiu Geng <gengdongjiu@huawei.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201008161414.2672569-1-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 default-configs/devices/arm-softmmu.mak | 1 -
 hw/arm/Kconfig                          | 1 +
 2 files changed, 1 insertion(+), 1 deletion(-)

diff --git a/default-configs/devices/arm-softmmu.mak b/default-configs/devices/arm-softmmu.mak
index XXXXXXX..XXXXXXX 100644
--- a/default-configs/devices/arm-softmmu.mak
+++ b/default-configs/devices/arm-softmmu.mak
@@ -XXX,XX +XXX,XX @@ CONFIG_FSL_IMX7=y
 CONFIG_FSL_IMX6UL=y
 CONFIG_SEMIHOSTING=y
 CONFIG_ALLWINNER_H3=y
-CONFIG_ACPI_APEI=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -XXX,XX +XXX,XX @@ config ARM_VIRT
     select ACPI_MEMORY_HOTPLUG
     select ACPI_HW_REDUCED
     select ACPI_NVDIMM
+    select ACPI_APEI
 
 config CHEETAH
     bool
-- 
2.20.1

From: Philippe Mathieu-Daudé <f4bug@amsat.org>

Use the BCM2835_SYSTIMER_COUNT definition instead of the
magic '4' value.

Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201010203709.3116542-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/timer/bcm2835_systmr.h | 4 +++-
 hw/timer/bcm2835_systmr.c         | 3 ++-
 2 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/include/hw/timer/bcm2835_systmr.h b/include/hw/timer/bcm2835_systmr.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/timer/bcm2835_systmr.h
+++ b/include/hw/timer/bcm2835_systmr.h
@@ -XXX,XX +XXX,XX @@
 #define TYPE_BCM2835_SYSTIMER "bcm2835-sys-timer"
 OBJECT_DECLARE_SIMPLE_TYPE(BCM2835SystemTimerState, BCM2835_SYSTIMER)
 
+#define BCM2835_SYSTIMER_COUNT 4
+
 struct BCM2835SystemTimerState {
     /*< private >*/
     SysBusDevice parent_obj;
@@ -XXX,XX +XXX,XX @@ struct BCM2835SystemTimerState {
 
     struct {
         uint32_t status;
-        uint32_t compare[4];
+        uint32_t compare[BCM2835_SYSTIMER_COUNT];
     } reg;
 };
 
diff --git a/hw/timer/bcm2835_systmr.c b/hw/timer/bcm2835_systmr.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/timer/bcm2835_systmr.c
+++ b/hw/timer/bcm2835_systmr.c
@@ -XXX,XX +XXX,XX @@ static const VMStateDescription bcm2835_systmr_vmstate = {
     .minimum_version_id = 1,
     .fields = (VMStateField[]) {
         VMSTATE_UINT32(reg.status, BCM2835SystemTimerState),
-        VMSTATE_UINT32_ARRAY(reg.compare, BCM2835SystemTimerState, 4),
+        VMSTATE_UINT32_ARRAY(reg.compare, BCM2835SystemTimerState,
+                             BCM2835_SYSTIMER_COUNT),
         VMSTATE_END_OF_LIST()
     }
 };
-- 
2.20.1

From: Philippe Mathieu-Daudé <f4bug@amsat.org>

The variable holding the CTRL_STATUS register is misnamed
'status'. Rename it 'ctrl_status' to make it more obvious
this register is also used to control the peripheral.

Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201010203709.3116542-3-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/timer/bcm2835_systmr.h | 2 +-
 hw/timer/bcm2835_systmr.c         | 8 ++++----
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/include/hw/timer/bcm2835_systmr.h b/include/hw/timer/bcm2835_systmr.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/timer/bcm2835_systmr.h
+++ b/include/hw/timer/bcm2835_systmr.h
@@ -XXX,XX +XXX,XX @@ struct BCM2835SystemTimerState {
     qemu_irq irq;
 
     struct {
-        uint32_t status;
+        uint32_t ctrl_status;
         uint32_t compare[BCM2835_SYSTIMER_COUNT];
     } reg;
 };
diff --git a/hw/timer/bcm2835_systmr.c b/hw/timer/bcm2835_systmr.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/timer/bcm2835_systmr.c
+++ b/hw/timer/bcm2835_systmr.c
@@ -XXX,XX +XXX,XX @@ REG32(COMPARE3,     0x18)
 
 static void bcm2835_systmr_update_irq(BCM2835SystemTimerState *s)
 {
-    bool enable = !!s->reg.status;
+    bool enable = !!s->reg.ctrl_status;
 
     trace_bcm2835_systmr_irq(enable);
     qemu_set_irq(s->irq, enable);
@@ -XXX,XX +XXX,XX @@ static uint64_t bcm2835_systmr_read(void *opaque, hwaddr offset,
 
     switch (offset) {
     case A_CTRL_STATUS:
-        r = s->reg.status;
+        r = s->reg.ctrl_status;
         break;
     case A_COMPARE0 ... A_COMPARE3:
         r = s->reg.compare[(offset - A_COMPARE0) >> 2];
@@ -XXX,XX +XXX,XX @@ static void bcm2835_systmr_write(void *opaque, hwaddr offset,
     trace_bcm2835_systmr_write(offset, value);
     switch (offset) {
     case A_CTRL_STATUS:
-        s->reg.status &= ~value; /* Ack */
+        s->reg.ctrl_status &= ~value; /* Ack */
         bcm2835_systmr_update_irq(s);
         break;
     case A_COMPARE0 ... A_COMPARE3:
@@ -XXX,XX +XXX,XX @@ static const VMStateDescription bcm2835_systmr_vmstate = {
     .version_id = 1,
     .minimum_version_id = 1,
     .fields = (VMStateField[]) {
-        VMSTATE_UINT32(reg.status, BCM2835SystemTimerState),
+        VMSTATE_UINT32(reg.ctrl_status, BCM2835SystemTimerState),
         VMSTATE_UINT32_ARRAY(reg.compare, BCM2835SystemTimerState,
                              BCM2835_SYSTIMER_COUNT),
         VMSTATE_END_OF_LIST()
-- 
2.20.1

From: Philippe Mathieu-Daudé <f4bug@amsat.org>

This peripheral has 1 free-running timer and 4 compare registers.

Only the free-running timer is implemented. Add support the
COMPARE registers (each register is wired to an IRQ).

Reference: "BCM2835 ARM Peripherals" datasheet [*]
            chapter 12 "System Timer":

The System Timer peripheral provides four 32-bit timer channels
  and a single 64-bit free running counter. Each channel has an
  output compare register, which is compared against the 32 least
  significant bits of the free running counter values. When the
  two values match, the system timer peripheral generates a signal
  to indicate a match for the appropriate channel. The match signal
  is then fed into the interrupt controller.

This peripheral is used since Linux 3.7, commit ee4af5696720
("ARM: bcm2835: add system timer").

[*] https://www.raspberrypi.org/app/uploads/2012/02/BCM2835-ARM-Peripherals.pdf

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20201010203709.3116542-4-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/timer/bcm2835_systmr.h | 11 +++++--
 hw/timer/bcm2835_systmr.c         | 48 ++++++++++++++++++++-----------
 hw/timer/trace-events             |  6 ++--
 3 files changed, 44 insertions(+), 21 deletions(-)

diff --git a/include/hw/timer/bcm2835_systmr.h b/include/hw/timer/bcm2835_systmr.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/timer/bcm2835_systmr.h
+++ b/include/hw/timer/bcm2835_systmr.h
@@ -XXX,XX +XXX,XX @@
 
 #include "hw/sysbus.h"
 #include "hw/irq.h"
+#include "qemu/timer.h"
 #include "qom/object.h"
 
 #define TYPE_BCM2835_SYSTIMER "bcm2835-sys-timer"
@@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(BCM2835SystemTimerState, BCM2835_SYSTIMER)
 
 #define BCM2835_SYSTIMER_COUNT 4
 
+typedef struct {
+    unsigned id;
+    QEMUTimer timer;
+    qemu_irq irq;
+    BCM2835SystemTimerState *state;
+} BCM2835SystemTimerCompare;
+
 struct BCM2835SystemTimerState {
     /*< private >*/
     SysBusDevice parent_obj;
 
     /*< public >*/
     MemoryRegion iomem;
-    qemu_irq irq;
-
     struct {
         uint32_t ctrl_status;
         uint32_t compare[BCM2835_SYSTIMER_COUNT];
     } reg;
+    BCM2835SystemTimerCompare tmr[BCM2835_SYSTIMER_COUNT];
 };
 
 #endif
diff --git a/hw/timer/bcm2835_systmr.c b/hw/timer/bcm2835_systmr.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/timer/bcm2835_systmr.c
+++ b/hw/timer/bcm2835_systmr.c
@@ -XXX,XX +XXX,XX @@ REG32(COMPARE1,     0x10)
 REG32(COMPARE2,     0x14)
 REG32(COMPARE3,     0x18)
 
-static void bcm2835_systmr_update_irq(BCM2835SystemTimerState *s)
+static void bcm2835_systmr_timer_expire(void *opaque)
 {
-    bool enable = !!s->reg.ctrl_status;
+    BCM2835SystemTimerCompare *tmr = opaque;
 
-    trace_bcm2835_systmr_irq(enable);
-    qemu_set_irq(s->irq, enable);
-}
-
-static void bcm2835_systmr_update_compare(BCM2835SystemTimerState *s,
-                                          unsigned timer_index)
-{
-    /* TODO fow now, since neither Linux nor U-boot use these timers. */
-    qemu_log_mask(LOG_UNIMP, "COMPARE register %u not implemented\n",
-                  timer_index);
+    trace_bcm2835_systmr_timer_expired(tmr->id);
+    tmr->state->reg.ctrl_status |= 1 << tmr->id;
+    qemu_set_irq(tmr->irq, 1);
 }
 
 static uint64_t bcm2835_systmr_read(void *opaque, hwaddr offset,
@@ -XXX,XX +XXX,XX @@ static uint64_t bcm2835_systmr_read(void *opaque, hwaddr offset,
 }
 
 static void bcm2835_systmr_write(void *opaque, hwaddr offset,
-                                 uint64_t value, unsigned size)
+                                 uint64_t value64, unsigned size)
 {
     BCM2835SystemTimerState *s = BCM2835_SYSTIMER(opaque);
+    int index;
+    uint32_t value = value64;
+    uint32_t triggers_delay_us;
+    uint64_t now;
 
     trace_bcm2835_systmr_write(offset, value);
     switch (offset) {
     case A_CTRL_STATUS:
         s->reg.ctrl_status &= ~value; /* Ack */
-        bcm2835_systmr_update_irq(s);
+        for (index = 0; index < ARRAY_SIZE(s->tmr); index++) {
+            if (extract32(value, index, 1)) {
+                trace_bcm2835_systmr_irq_ack(index);
+                qemu_set_irq(s->tmr[index].irq, 0);
+            }
+        }
         break;
     case A_COMPARE0 ... A_COMPARE3:
-        s->reg.compare[(offset - A_COMPARE0) >> 2] = value;
-        bcm2835_systmr_update_compare(s, (offset - A_COMPARE0) >> 2);
+        index = (offset - A_COMPARE0) >> 2;
+        s->reg.compare[index] = value;
+        now = qemu_clock_get_us(QEMU_CLOCK_VIRTUAL);
+        /* Compare lower 32-bits of the free-running counter. */
+        triggers_delay_us = value - now;
+        trace_bcm2835_systmr_run(index, triggers_delay_us);
+        timer_mod(&s->tmr[index].timer, now + triggers_delay_us);
         break;
     case A_COUNTER_LOW:
     case A_COUNTER_HIGH:
@@ -XXX,XX +XXX,XX @@ static void bcm2835_systmr_realize(DeviceState *dev, Error **errp)
     memory_region_init_io(&s->iomem, OBJECT(dev), &bcm2835_systmr_ops,
                           s, "bcm2835-sys-timer", 0x20);
     sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->iomem);
-    sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq);
+
+    for (size_t i = 0; i < ARRAY_SIZE(s->tmr); i++) {
+        s->tmr[i].id = i;
+        s->tmr[i].state = s;
+        sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->tmr[i].irq);
+        timer_init_us(&s->tmr[i].timer, QEMU_CLOCK_VIRTUAL,
+                      bcm2835_systmr_timer_expire, &s->tmr[i]);
+    }
 }
 
 static const VMStateDescription bcm2835_systmr_vmstate = {
diff --git a/hw/timer/trace-events b/hw/timer/trace-events
index XXXXXXX..XXXXXXX 100644
--- a/hw/timer/trace-events
+++ b/hw/timer/trace-events
@@ -XXX,XX +XXX,XX @@ nrf51_timer_write(uint8_t timer_id, uint64_t addr, uint32_t value, unsigned size
 nrf51_timer_set_count(uint8_t timer_id, uint8_t counter_id, uint32_t value) "timer %u counter %u count 0x%" PRIx32
 
 # bcm2835_systmr.c
-bcm2835_systmr_irq(bool enable) "timer irq state %u"
+bcm2835_systmr_timer_expired(unsigned id) "timer #%u expired"
+bcm2835_systmr_irq_ack(unsigned id) "timer #%u acked"
 bcm2835_systmr_read(uint64_t offset, uint64_t data) "timer read: offset 0x%" PRIx64 " data 0x%" PRIx64
-bcm2835_systmr_write(uint64_t offset, uint64_t data) "timer write: offset 0x%" PRIx64 " data 0x%" PRIx64
+bcm2835_systmr_write(uint64_t offset, uint32_t data) "timer write: offset 0x%" PRIx64 " data 0x%" PRIx32
+bcm2835_systmr_run(unsigned id, uint64_t delay_us) "timer #%u expiring in %"PRIu64" us"
 
 # avr_timer16.c
 avr_timer16_read(uint8_t addr, uint8_t value) "timer16 read addr:%u value:%u"
-- 
2.20.1

From: Philippe Mathieu-Daudé <f4bug@amsat.org>

The SYS_timer is not directly wired to the ARM core, but to the
SoC (peripheral) interrupt controller.

Fixes: 0e5bbd74064 ("hw/arm/bcm2835_peripherals: Use the SYS_timer")
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201010203709.3116542-5-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/bcm2835_peripherals.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/hw/arm/bcm2835_peripherals.c b/hw/arm/bcm2835_peripherals.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/bcm2835_peripherals.c
+++ b/hw/arm/bcm2835_peripherals.c
@@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp)
     memory_region_add_subregion(&s->peri_mr, ST_OFFSET,
                 sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->systmr), 0));
     sysbus_connect_irq(SYS_BUS_DEVICE(&s->systmr), 0,
-        qdev_get_gpio_in_named(DEVICE(&s->ic), BCM2835_IC_ARM_IRQ,
-                               INTERRUPT_ARM_TIMER));
+        qdev_get_gpio_in_named(DEVICE(&s->ic), BCM2835_IC_GPU_IRQ,
+                               INTERRUPT_TIMER0));
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->systmr), 1,
+        qdev_get_gpio_in_named(DEVICE(&s->ic), BCM2835_IC_GPU_IRQ,
+                               INTERRUPT_TIMER1));
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->systmr), 2,
+        qdev_get_gpio_in_named(DEVICE(&s->ic), BCM2835_IC_GPU_IRQ,
+                               INTERRUPT_TIMER2));
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->systmr), 3,
+        qdev_get_gpio_in_named(DEVICE(&s->ic), BCM2835_IC_GPU_IRQ,
+                               INTERRUPT_TIMER3));
 
     /* UART0 */
     qdev_prop_set_chr(DEVICE(&s->uart0), "chardev", serial_hd(0));
-- 
2.20.1

From: Richard Henderson <richard.henderson@linaro.org>

On ARM, the Top Byte Ignore feature means that only 56 bits of
the address are significant in the virtual address.  We are
required to give the entire 64-bit address to FAR_ELx on fault,
which means that we do not "clean" the top byte early in TCG.

This new interface allows us to flush all 256 possible aliases
for a given page, currently missed by tlb_flush_page*.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20201016210754.818257-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/exec/exec-all.h |  36 ++++++
 accel/tcg/cputlb.c      | 275 ++++++++++++++++++++++++++++++++++++++--
 2 files changed, 302 insertions(+), 9 deletions(-)

diff --git a/include/exec/exec-all.h b/include/exec/exec-all.h
index XXXXXXX..XXXXXXX 100644
--- a/include/exec/exec-all.h
+++ b/include/exec/exec-all.h
@@ -XXX,XX +XXX,XX @@ void tlb_flush_by_mmuidx_all_cpus(CPUState *cpu, uint16_t idxmap);
  * depend on when the guests translation ends the TB.
  */
 void tlb_flush_by_mmuidx_all_cpus_synced(CPUState *cpu, uint16_t idxmap);
+
+/**
+ * tlb_flush_page_bits_by_mmuidx
+ * @cpu: CPU whose TLB should be flushed
+ * @addr: virtual address of page to be flushed
+ * @idxmap: bitmap of mmu indexes to flush
+ * @bits: number of significant bits in address
+ *
+ * Similar to tlb_flush_page_mask, but with a bitmap of indexes.
+ */
+void tlb_flush_page_bits_by_mmuidx(CPUState *cpu, target_ulong addr,
+                                   uint16_t idxmap, unsigned bits);
+
+/* Similarly, with broadcast and syncing. */
+void tlb_flush_page_bits_by_mmuidx_all_cpus(CPUState *cpu, target_ulong addr,
+                                            uint16_t idxmap, unsigned bits);
+void tlb_flush_page_bits_by_mmuidx_all_cpus_synced
+    (CPUState *cpu, target_ulong addr, uint16_t idxmap, unsigned bits);
+
 /**
  * tlb_set_page_with_attrs:
  * @cpu: CPU to add this TLB entry for
@@ -XXX,XX +XXX,XX @@ static inline void tlb_flush_by_mmuidx_all_cpus_synced(CPUState *cpu,
                                                        uint16_t idxmap)
 {
 }
+static inline void tlb_flush_page_bits_by_mmuidx(CPUState *cpu,
+                                                 target_ulong addr,
+                                                 uint16_t idxmap,
+                                                 unsigned bits)
+{
+}
+static inline void tlb_flush_page_bits_by_mmuidx_all_cpus(CPUState *cpu,
+                                                          target_ulong addr,
+                                                          uint16_t idxmap,
+                                                          unsigned bits)
+{
+}
+static inline void
+tlb_flush_page_bits_by_mmuidx_all_cpus_synced(CPUState *cpu, target_ulong addr,
+                                              uint16_t idxmap, unsigned bits)
+{
+}
 #endif
 /**
  * probe_access:
diff --git a/accel/tcg/cputlb.c b/accel/tcg/cputlb.c
index XXXXXXX..XXXXXXX 100644
--- a/accel/tcg/cputlb.c
+++ b/accel/tcg/cputlb.c
@@ -XXX,XX +XXX,XX @@ void tlb_flush_all_cpus_synced(CPUState *src_cpu)
     tlb_flush_by_mmuidx_all_cpus_synced(src_cpu, ALL_MMUIDX_BITS);
 }
 
+static bool tlb_hit_page_mask_anyprot(CPUTLBEntry *tlb_entry,
+                                      target_ulong page, target_ulong mask)
+{
+    page &= mask;
+    mask &= TARGET_PAGE_MASK | TLB_INVALID_MASK;
+
+    return (page == (tlb_entry->addr_read & mask) ||
+            page == (tlb_addr_write(tlb_entry) & mask) ||
+            page == (tlb_entry->addr_code & mask));
+}
+
 static inline bool tlb_hit_page_anyprot(CPUTLBEntry *tlb_entry,
                                         target_ulong page)
 {
-    return tlb_hit_page(tlb_entry->addr_read, page) ||
-           tlb_hit_page(tlb_addr_write(tlb_entry), page) ||
-           tlb_hit_page(tlb_entry->addr_code, page);
+    return tlb_hit_page_mask_anyprot(tlb_entry, page, -1);
 }
 
 /**
@@ -XXX,XX +XXX,XX @@ static inline bool tlb_entry_is_empty(const CPUTLBEntry *te)
 }
 
 /* Called with tlb_c.lock held */
-static inline bool tlb_flush_entry_locked(CPUTLBEntry *tlb_entry,
-                                          target_ulong page)
+static bool tlb_flush_entry_mask_locked(CPUTLBEntry *tlb_entry,
+                                        target_ulong page,
+                                        target_ulong mask)
 {
-    if (tlb_hit_page_anyprot(tlb_entry, page)) {
+    if (tlb_hit_page_mask_anyprot(tlb_entry, page, mask)) {
         memset(tlb_entry, -1, sizeof(*tlb_entry));
         return true;
     }
     return false;
 }
 
+static inline bool tlb_flush_entry_locked(CPUTLBEntry *tlb_entry,
+                                          target_ulong page)
+{
+    return tlb_flush_entry_mask_locked(tlb_entry, page, -1);
+}
+
 /* Called with tlb_c.lock held */
-static inline void tlb_flush_vtlb_page_locked(CPUArchState *env, int mmu_idx,
-                                              target_ulong page)
+static void tlb_flush_vtlb_page_mask_locked(CPUArchState *env, int mmu_idx,
+                                            target_ulong page,
+                                            target_ulong mask)
 {
     CPUTLBDesc *d = &env_tlb(env)->d[mmu_idx];
     int k;
 
     assert_cpu_is_self(env_cpu(env));
     for (k = 0; k < CPU_VTLB_SIZE; k++) {
-        if (tlb_flush_entry_locked(&d->vtable[k], page)) {
+        if (tlb_flush_entry_mask_locked(&d->vtable[k], page, mask)) {
             tlb_n_used_entries_dec(env, mmu_idx);
         }
     }
 }
 
+static inline void tlb_flush_vtlb_page_locked(CPUArchState *env, int mmu_idx,
+                                              target_ulong page)
+{
+    tlb_flush_vtlb_page_mask_locked(env, mmu_idx, page, -1);
+}
+
 static void tlb_flush_page_locked(CPUArchState *env, int midx,
                                   target_ulong page)
 {
@@ -XXX,XX +XXX,XX @@ void tlb_flush_page_all_cpus_synced(CPUState *src, target_ulong addr)
     tlb_flush_page_by_mmuidx_all_cpus_synced(src, addr, ALL_MMUIDX_BITS);
 }
 
+static void tlb_flush_page_bits_locked(CPUArchState *env, int midx,
+                                       target_ulong page, unsigned bits)
+{
+    CPUTLBDesc *d = &env_tlb(env)->d[midx];
+    CPUTLBDescFast *f = &env_tlb(env)->f[midx];
+    target_ulong mask = MAKE_64BIT_MASK(0, bits);
+
+    /*
+     * If @bits is smaller than the tlb size, there may be multiple entries
+     * within the TLB; otherwise all addresses that match under @mask hit
+     * the same TLB entry.
+     *
+     * TODO: Perhaps allow bits to be a few bits less than the size.
+     * For now, just flush the entire TLB.
+     */
+    if (mask < f->mask) {
+        tlb_debug("forcing full flush midx %d ("
+                  TARGET_FMT_lx "/" TARGET_FMT_lx ")\n",
+                  midx, page, mask);
+        tlb_flush_one_mmuidx_locked(env, midx, get_clock_realtime());
+        return;
+    }
+
+    /* Check if we need to flush due to large pages.  */
+    if ((page & d->large_page_mask) == d->large_page_addr) {
+        tlb_debug("forcing full flush midx %d ("
+                  TARGET_FMT_lx "/" TARGET_FMT_lx ")\n",
+                  midx, d->large_page_addr, d->large_page_mask);
+        tlb_flush_one_mmuidx_locked(env, midx, get_clock_realtime());
+        return;
+    }
+
+    if (tlb_flush_entry_mask_locked(tlb_entry(env, midx, page), page, mask)) {
+        tlb_n_used_entries_dec(env, midx);
+    }
+    tlb_flush_vtlb_page_mask_locked(env, midx, page, mask);
+}
+
+typedef struct {
+    target_ulong addr;
+    uint16_t idxmap;
+    uint16_t bits;
+} TLBFlushPageBitsByMMUIdxData;
+
+static void
+tlb_flush_page_bits_by_mmuidx_async_0(CPUState *cpu,
+                                      TLBFlushPageBitsByMMUIdxData d)
+{
+    CPUArchState *env = cpu->env_ptr;
+    int mmu_idx;
+
+    assert_cpu_is_self(cpu);
+
+    tlb_debug("page addr:" TARGET_FMT_lx "/%u mmu_map:0x%x\n",
+              d.addr, d.bits, d.idxmap);
+
+    qemu_spin_lock(&env_tlb(env)->c.lock);
+    for (mmu_idx = 0; mmu_idx < NB_MMU_MODES; mmu_idx++) {
+        if ((d.idxmap >> mmu_idx) & 1) {
+            tlb_flush_page_bits_locked(env, mmu_idx, d.addr, d.bits);
+        }
+    }
+    qemu_spin_unlock(&env_tlb(env)->c.lock);
+
+    tb_flush_jmp_cache(cpu, d.addr);
+}
+
+static bool encode_pbm_to_runon(run_on_cpu_data *out,
+                                TLBFlushPageBitsByMMUIdxData d)
+{
+    /* We need 6 bits to hold to hold @bits up to 63. */
+    if (d.idxmap <= MAKE_64BIT_MASK(0, TARGET_PAGE_BITS - 6)) {
+        *out = RUN_ON_CPU_TARGET_PTR(d.addr | (d.idxmap << 6) | d.bits);
+        return true;
+    }
+    return false;
+}
+
+static TLBFlushPageBitsByMMUIdxData
+decode_runon_to_pbm(run_on_cpu_data data)
+{
+    target_ulong addr_map_bits = (target_ulong) data.target_ptr;
+    return (TLBFlushPageBitsByMMUIdxData){
+        .addr = addr_map_bits & TARGET_PAGE_MASK,
+        .idxmap = (addr_map_bits & ~TARGET_PAGE_MASK) >> 6,
+        .bits = addr_map_bits & 0x3f
+    };
+}
+
+static void tlb_flush_page_bits_by_mmuidx_async_1(CPUState *cpu,
+                                                  run_on_cpu_data runon)
+{
+    tlb_flush_page_bits_by_mmuidx_async_0(cpu, decode_runon_to_pbm(runon));
+}
+
+static void tlb_flush_page_bits_by_mmuidx_async_2(CPUState *cpu,
+                                                  run_on_cpu_data data)
+{
+    TLBFlushPageBitsByMMUIdxData *d = data.host_ptr;
+    tlb_flush_page_bits_by_mmuidx_async_0(cpu, *d);
+    g_free(d);
+}
+
+void tlb_flush_page_bits_by_mmuidx(CPUState *cpu, target_ulong addr,
+                                   uint16_t idxmap, unsigned bits)
+{
+    TLBFlushPageBitsByMMUIdxData d;
+    run_on_cpu_data runon;
+
+    /* If all bits are significant, this devolves to tlb_flush_page. */
+    if (bits >= TARGET_LONG_BITS) {
+        tlb_flush_page_by_mmuidx(cpu, addr, idxmap);
+        return;
+    }
+    /* If no page bits are significant, this devolves to tlb_flush. */
+    if (bits < TARGET_PAGE_BITS) {
+        tlb_flush_by_mmuidx(cpu, idxmap);
+        return;
+    }
+
+    /* This should already be page aligned */
+    d.addr = addr & TARGET_PAGE_MASK;
+    d.idxmap = idxmap;
+    d.bits = bits;
+
+    if (qemu_cpu_is_self(cpu)) {
+        tlb_flush_page_bits_by_mmuidx_async_0(cpu, d);
+    } else if (encode_pbm_to_runon(&runon, d)) {
+        async_run_on_cpu(cpu, tlb_flush_page_bits_by_mmuidx_async_1, runon);
+    } else {
+        TLBFlushPageBitsByMMUIdxData *p
+            = g_new(TLBFlushPageBitsByMMUIdxData, 1);
+
+        /* Otherwise allocate a structure, freed by the worker.  */
+        *p = d;
+        async_run_on_cpu(cpu, tlb_flush_page_bits_by_mmuidx_async_2,
+                         RUN_ON_CPU_HOST_PTR(p));
+    }
+}
+
+void tlb_flush_page_bits_by_mmuidx_all_cpus(CPUState *src_cpu,
+                                            target_ulong addr,
+                                            uint16_t idxmap,
+                                            unsigned bits)
+{
+    TLBFlushPageBitsByMMUIdxData d;
+    run_on_cpu_data runon;
+
+    /* If all bits are significant, this devolves to tlb_flush_page. */
+    if (bits >= TARGET_LONG_BITS) {
+        tlb_flush_page_by_mmuidx_all_cpus(src_cpu, addr, idxmap);
+        return;
+    }
+    /* If no page bits are significant, this devolves to tlb_flush. */
+    if (bits < TARGET_PAGE_BITS) {
+        tlb_flush_by_mmuidx_all_cpus(src_cpu, idxmap);
+        return;
+    }
+
+    /* This should already be page aligned */
+    d.addr = addr & TARGET_PAGE_MASK;
+    d.idxmap = idxmap;
+    d.bits = bits;
+
+    if (encode_pbm_to_runon(&runon, d)) {
+        flush_all_helper(src_cpu, tlb_flush_page_bits_by_mmuidx_async_1, runon);
+    } else {
+        CPUState *dst_cpu;
+        TLBFlushPageBitsByMMUIdxData *p;
+
+        /* Allocate a separate data block for each destination cpu.  */
+        CPU_FOREACH(dst_cpu) {
+            if (dst_cpu != src_cpu) {
+                p = g_new(TLBFlushPageBitsByMMUIdxData, 1);
+                *p = d;
+                async_run_on_cpu(dst_cpu,
+                                 tlb_flush_page_bits_by_mmuidx_async_2,
+                                 RUN_ON_CPU_HOST_PTR(p));
+            }
+        }
+    }
+
+    tlb_flush_page_bits_by_mmuidx_async_0(src_cpu, d);
+}
+
+void tlb_flush_page_bits_by_mmuidx_all_cpus_synced(CPUState *src_cpu,
+                                                   target_ulong addr,
+                                                   uint16_t idxmap,
+                                                   unsigned bits)
+{
+    TLBFlushPageBitsByMMUIdxData d;
+    run_on_cpu_data runon;
+
+    /* If all bits are significant, this devolves to tlb_flush_page. */
+    if (bits >= TARGET_LONG_BITS) {
+        tlb_flush_page_by_mmuidx_all_cpus_synced(src_cpu, addr, idxmap);
+        return;
+    }
+    /* If no page bits are significant, this devolves to tlb_flush. */
+    if (bits < TARGET_PAGE_BITS) {
+        tlb_flush_by_mmuidx_all_cpus_synced(src_cpu, idxmap);
+        return;
+    }
+
+    /* This should already be page aligned */
+    d.addr = addr & TARGET_PAGE_MASK;
+    d.idxmap = idxmap;
+    d.bits = bits;
+
+    if (encode_pbm_to_runon(&runon, d)) {
+        flush_all_helper(src_cpu, tlb_flush_page_bits_by_mmuidx_async_1, runon);
+        async_safe_run_on_cpu(src_cpu, tlb_flush_page_bits_by_mmuidx_async_1,
+                              runon);
+    } else {
+        CPUState *dst_cpu;
+        TLBFlushPageBitsByMMUIdxData *p;
+
+        /* Allocate a separate data block for each destination cpu.  */
+        CPU_FOREACH(dst_cpu) {
+            if (dst_cpu != src_cpu) {
+                p = g_new(TLBFlushPageBitsByMMUIdxData, 1);
+                *p = d;
+                async_run_on_cpu(dst_cpu, tlb_flush_page_bits_by_mmuidx_async_2,
+                                 RUN_ON_CPU_HOST_PTR(p));
+            }
+        }
+
+        p = g_new(TLBFlushPageBitsByMMUIdxData, 1);
+        *p = d;
+        async_safe_run_on_cpu(src_cpu, tlb_flush_page_bits_by_mmuidx_async_2,
+                              RUN_ON_CPU_HOST_PTR(p));
+    }
+}
+
 /* update the TLBs so that writes to code in the virtual page 'addr'
    can be detected */
 void tlb_protect_code(ram_addr_t ram_addr)
-- 
2.20.1

From: Richard Henderson <richard.henderson@linaro.org>

When TBI is enabled in a given regime, 56 bits of the address
are significant and we need to clear out any other matching
virtual addresses with differing tags.

The other uses of tlb_flush_page (without mmuidx) in this file
are only used by aarch32 mode.

Fixes: 38d931687fa1
Reported-by: Jordan Frank <jordanfrank@fb.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201016210754.818257-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/helper.c | 46 ++++++++++++++++++++++++++++++++++++++-------
 1 file changed, 39 insertions(+), 7 deletions(-)

diff --git a/target/arm/helper.c b/target/arm/helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_lpae(CPUARMState *env, target_ulong address,
 #endif
 
 static void switch_mode(CPUARMState *env, int mode);
+static int aa64_va_parameter_tbi(uint64_t tcr, ARMMMUIdx mmu_idx);
 
 static int vfp_gdb_get_reg(CPUARMState *env, GByteArray *buf, int reg)
 {
@@ -XXX,XX +XXX,XX @@ static int vae1_tlbmask(CPUARMState *env)
     }
 }
 
+/* Return 56 if TBI is enabled, 64 otherwise. */
+static int tlbbits_for_regime(CPUARMState *env, ARMMMUIdx mmu_idx,
+                              uint64_t addr)
+{
+    uint64_t tcr = regime_tcr(env, mmu_idx)->raw_tcr;
+    int tbi = aa64_va_parameter_tbi(tcr, mmu_idx);
+    int select = extract64(addr, 55, 1);
+
+    return (tbi >> select) & 1 ? 56 : 64;
+}
+
+static int vae1_tlbbits(CPUARMState *env, uint64_t addr)
+{
+    ARMMMUIdx mmu_idx;
+
+    /* Only the regime of the mmu_idx below is significant. */
+    if (arm_is_secure_below_el3(env)) {
+        mmu_idx = ARMMMUIdx_SE10_0;
+    } else if ((env->cp15.hcr_el2 & (HCR_E2H | HCR_TGE))
+               == (HCR_E2H | HCR_TGE)) {
+        mmu_idx = ARMMMUIdx_E20_0;
+    } else {
+        mmu_idx = ARMMMUIdx_E10_0;
+    }
+    return tlbbits_for_regime(env, mmu_idx, addr);
+}
+
 static void tlbi_aa64_vmalle1is_write(CPUARMState *env, const ARMCPRegInfo *ri,
                                       uint64_t value)
 {
@@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_vae1is_write(CPUARMState *env, const ARMCPRegInfo *ri,
     CPUState *cs = env_cpu(env);
     int mask = vae1_tlbmask(env);
     uint64_t pageaddr = sextract64(value << 12, 0, 56);
+    int bits = vae1_tlbbits(env, pageaddr);
 
-    tlb_flush_page_by_mmuidx_all_cpus_synced(cs, pageaddr, mask);
+    tlb_flush_page_bits_by_mmuidx_all_cpus_synced(cs, pageaddr, mask, bits);
 }
 
 static void tlbi_aa64_vae1_write(CPUARMState *env, const ARMCPRegInfo *ri,
@@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_vae1_write(CPUARMState *env, const ARMCPRegInfo *ri,
     CPUState *cs = env_cpu(env);
     int mask = vae1_tlbmask(env);
     uint64_t pageaddr = sextract64(value << 12, 0, 56);
+    int bits = vae1_tlbbits(env, pageaddr);
 
     if (tlb_force_broadcast(env)) {
-        tlb_flush_page_by_mmuidx_all_cpus_synced(cs, pageaddr, mask);
+        tlb_flush_page_bits_by_mmuidx_all_cpus_synced(cs, pageaddr, mask, bits);
     } else {
-        tlb_flush_page_by_mmuidx(cs, pageaddr, mask);
+        tlb_flush_page_bits_by_mmuidx(cs, pageaddr, mask, bits);
     }
 }
 
@@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_vae2is_write(CPUARMState *env, const ARMCPRegInfo *ri,
 {
     CPUState *cs = env_cpu(env);
     uint64_t pageaddr = sextract64(value << 12, 0, 56);
+    int bits = tlbbits_for_regime(env, ARMMMUIdx_E2, pageaddr);
 
-    tlb_flush_page_by_mmuidx_all_cpus_synced(cs, pageaddr,
-                                             ARMMMUIdxBit_E2);
+    tlb_flush_page_bits_by_mmuidx_all_cpus_synced(cs, pageaddr,
+                                                  ARMMMUIdxBit_E2, bits);
 }
 
 static void tlbi_aa64_vae3is_write(CPUARMState *env, const ARMCPRegInfo *ri,
@@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_vae3is_write(CPUARMState *env, const ARMCPRegInfo *ri,
 {
     CPUState *cs = env_cpu(env);
     uint64_t pageaddr = sextract64(value << 12, 0, 56);
+    int bits = tlbbits_for_regime(env, ARMMMUIdx_SE3, pageaddr);
 
-    tlb_flush_page_by_mmuidx_all_cpus_synced(cs, pageaddr,
-                                             ARMMMUIdxBit_SE3);
+    tlb_flush_page_bits_by_mmuidx_all_cpus_synced(cs, pageaddr,
+                                                  ARMMMUIdxBit_SE3, bits);
 }
 
 static CPAccessResult aa64_zva_access(CPUARMState *env, const ARMCPRegInfo *ri,
-- 
2.20.1

From: Havard Skinnemoen <hskinnemoen@google.com>

This test exercises the various modes of the npcm7xx timer. In
particular, it triggers the bug found by the fuzzer, as reported here:

https://lists.gnu.org/archive/html/qemu-devel/2020-09/msg02992.html

It also found several other bugs, especially related to interrupt
handling.

The test exercises all the timers in all the timer modules, which
expands to 180 test cases in total.

Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-id: 20201008232154.94221-2-hskinnemoen@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 tests/qtest/npcm7xx_timer-test.c | 562 +++++++++++++++++++++++++++++++
 tests/qtest/meson.build          |   1 +
 2 files changed, 563 insertions(+)
 create mode 100644 tests/qtest/npcm7xx_timer-test.c

diff --git a/tests/qtest/npcm7xx_timer-test.c b/tests/qtest/npcm7xx_timer-test.c
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/tests/qtest/npcm7xx_timer-test.c
@@ -XXX,XX +XXX,XX @@
+/*
+ * QTest testcase for the Nuvoton NPCM7xx Timer
+ *
+ * Copyright 2020 Google LLC
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/timer.h"
+#include "libqtest-single.h"
+
+#define TIM_REF_HZ      (25000000)
+
+/* Bits in TCSRx */
+#define CEN             BIT(30)
+#define IE              BIT(29)
+#define MODE_ONESHOT    (0 << 27)
+#define MODE_PERIODIC   (1 << 27)
+#define CRST            BIT(26)
+#define CACT            BIT(25)
+#define PRESCALE(x)     (x)
+
+/* Registers shared between all timers in a module. */
+#define TISR    0x18
+#define WTCR    0x1c
+# define WTCLK(x)       ((x) << 10)
+
+/* Power-on default; used to re-initialize timers before each test. */
+#define TCSR_DEFAULT    PRESCALE(5)
+
+/* Register offsets for a timer within a timer block. */
+typedef struct Timer {
+    unsigned int tcsr_offset;
+    unsigned int ticr_offset;
+    unsigned int tdr_offset;
+} Timer;
+
+/* A timer block containing 5 timers. */
+typedef struct TimerBlock {
+    int irq_base;
+    uint64_t base_addr;
+} TimerBlock;
+
+/* Testdata for testing a particular timer within a timer block. */
+typedef struct TestData {
+    const TimerBlock *tim;
+    const Timer *timer;
+} TestData;
+
+const TimerBlock timer_block[] = {
+    {
+        .irq_base   = 32,
+        .base_addr  = 0xf0008000,
+    },
+    {
+        .irq_base   = 37,
+        .base_addr  = 0xf0009000,
+    },
+    {
+        .irq_base   = 42,
+        .base_addr  = 0xf000a000,
+    },
+};
+
+const Timer timer[] = {
+    {
+        .tcsr_offset    = 0x00,
+        .ticr_offset    = 0x08,
+        .tdr_offset     = 0x10,
+    }, {
+        .tcsr_offset    = 0x04,
+        .ticr_offset    = 0x0c,
+        .tdr_offset     = 0x14,
+    }, {
+        .tcsr_offset    = 0x20,
+        .ticr_offset    = 0x28,
+        .tdr_offset     = 0x30,
+    }, {
+        .tcsr_offset    = 0x24,
+        .ticr_offset    = 0x2c,
+        .tdr_offset     = 0x34,
+    }, {
+        .tcsr_offset    = 0x40,
+        .ticr_offset    = 0x48,
+        .tdr_offset     = 0x50,
+    },
+};
+
+/* Returns the index of the timer block. */
+static int tim_index(const TimerBlock *tim)
+{
+    ptrdiff_t diff = tim - timer_block;
+
+    g_assert(diff >= 0 && diff < ARRAY_SIZE(timer_block));
+
+    return diff;
+}
+
+/* Returns the index of a timer within a timer block. */
+static int timer_index(const Timer *t)
+{
+    ptrdiff_t diff = t - timer;
+
+    g_assert(diff >= 0 && diff < ARRAY_SIZE(timer));
+
+    return diff;
+}
+
+/* Returns the irq line for a given timer. */
+static int tim_timer_irq(const TestData *td)
+{
+    return td->tim->irq_base + timer_index(td->timer);
+}
+
+/* Register read/write accessors. */
+
+static void tim_write(const TestData *td,
+                      unsigned int offset, uint32_t value)
+{
+    writel(td->tim->base_addr + offset, value);
+}
+
+static uint32_t tim_read(const TestData *td, unsigned int offset)
+{
+    return readl(td->tim->base_addr + offset);
+}
+
+static void tim_write_tcsr(const TestData *td, uint32_t value)
+{
+    tim_write(td, td->timer->tcsr_offset, value);
+}
+
+static uint32_t tim_read_tcsr(const TestData *td)
+{
+    return tim_read(td, td->timer->tcsr_offset);
+}
+
+static void tim_write_ticr(const TestData *td, uint32_t value)
+{
+    tim_write(td, td->timer->ticr_offset, value);
+}
+
+static uint32_t tim_read_ticr(const TestData *td)
+{
+    return tim_read(td, td->timer->ticr_offset);
+}
+
+static uint32_t tim_read_tdr(const TestData *td)
+{
+    return tim_read(td, td->timer->tdr_offset);
+}
+
+/* Returns the number of nanoseconds to count the given number of cycles. */
+static int64_t tim_calculate_step(uint32_t count, uint32_t prescale)
+{
+    return (1000000000LL / TIM_REF_HZ) * count * (prescale + 1);
+}
+
+/* Returns a bitmask corresponding to the timer under test. */
+static uint32_t tim_timer_bit(const TestData *td)
+{
+    return BIT(timer_index(td->timer));
+}
+
+/* Resets all timers to power-on defaults. */
+static void tim_reset(const TestData *td)
+{
+    int i, j;
+
+    /* Reset all the timers, in case a previous test left a timer running. */
+    for (i = 0; i < ARRAY_SIZE(timer_block); i++) {
+        for (j = 0; j < ARRAY_SIZE(timer); j++) {
+            writel(timer_block[i].base_addr + timer[j].tcsr_offset,
+                   CRST | TCSR_DEFAULT);
+        }
+        writel(timer_block[i].base_addr + TISR, -1);
+    }
+}
+
+/* Verifies the reset state of a timer. */
+static void test_reset(gconstpointer test_data)
+{
+    const TestData *td = test_data;
+
+    tim_reset(td);
+
+    g_assert_cmphex(tim_read_tcsr(td), ==, TCSR_DEFAULT);
+    g_assert_cmphex(tim_read_ticr(td), ==, 0);
+    g_assert_cmphex(tim_read_tdr(td), ==, 0);
+    g_assert_cmphex(tim_read(td, TISR), ==, 0);
+    g_assert_cmphex(tim_read(td, WTCR), ==, WTCLK(1));
+}
+
+/* Verifies that CRST wins if both CEN and CRST are set. */
+static void test_reset_overrides_enable(gconstpointer test_data)
+{
+    const TestData *td = test_data;
+
+    tim_reset(td);
+
+    /* CRST should force CEN to 0 */
+    tim_write_tcsr(td, CEN | CRST | TCSR_DEFAULT);
+
+    g_assert_cmphex(tim_read_tcsr(td), ==, TCSR_DEFAULT);
+    g_assert_cmphex(tim_read_tdr(td), ==, 0);
+    g_assert_cmphex(tim_read(td, TISR), ==, 0);
+}
+
+/* Verifies the behavior when CEN is set and then cleared. */
+static void test_oneshot_enable_then_disable(gconstpointer test_data)
+{
+    const TestData *td = test_data;
+
+    tim_reset(td);
+
+    /* Enable the timer with zero initial count, then disable it again. */
+    tim_write_tcsr(td, CEN | TCSR_DEFAULT);
+    tim_write_tcsr(td, TCSR_DEFAULT);
+
+    g_assert_cmphex(tim_read_tcsr(td), ==, TCSR_DEFAULT);
+    g_assert_cmphex(tim_read_tdr(td), ==, 0);
+    /* Timer interrupt flag should be set, but interrupts are not enabled. */
+    g_assert_cmphex(tim_read(td, TISR), ==, tim_timer_bit(td));
+    g_assert_false(qtest_get_irq(global_qtest, tim_timer_irq(td)));
+}
+
+/* Verifies that a one-shot timer fires when expected with prescaler 5. */
+static void test_oneshot_ps5(gconstpointer test_data)
+{
+    const TestData *td = test_data;
+    unsigned int count = 256;
+    unsigned int ps = 5;
+
+    tim_reset(td);
+
+    tim_write_ticr(td, count);
+    tim_write_tcsr(td, CEN | PRESCALE(ps));
+    g_assert_cmphex(tim_read_tcsr(td), ==, CEN | CACT | PRESCALE(ps));
+    g_assert_cmpuint(tim_read_tdr(td), ==, count);
+
+    clock_step(tim_calculate_step(count, ps) - 1);
+
+    g_assert_cmphex(tim_read_tcsr(td), ==, CEN | CACT | PRESCALE(ps));
+    g_assert_cmpuint(tim_read_tdr(td), <, count);
+    g_assert_cmphex(tim_read(td, TISR), ==, 0);
+
+    clock_step(1);
+
+    g_assert_cmphex(tim_read_tcsr(td), ==, PRESCALE(ps));
+    g_assert_cmpuint(tim_read_tdr(td), ==, count);
+    g_assert_cmphex(tim_read(td, TISR), ==, tim_timer_bit(td));
+    g_assert_false(qtest_get_irq(global_qtest, tim_timer_irq(td)));
+
+    /* Clear the interrupt flag. */
+    tim_write(td, TISR, tim_timer_bit(td));
+    g_assert_cmphex(tim_read(td, TISR), ==, 0);
+    g_assert_false(qtest_get_irq(global_qtest, tim_timer_irq(td)));
+
+    /* Verify that this isn't a periodic timer. */
+    clock_step(2 * tim_calculate_step(count, ps));
+    g_assert_cmphex(tim_read(td, TISR), ==, 0);
+    g_assert_false(qtest_get_irq(global_qtest, tim_timer_irq(td)));
+}
+
+/* Verifies that a one-shot timer fires when expected with prescaler 0. */
+static void test_oneshot_ps0(gconstpointer test_data)
+{
+    const TestData *td = test_data;
+    unsigned int count = 1;
+    unsigned int ps = 0;
+
+    tim_reset(td);
+
+    tim_write_ticr(td, count);
+    tim_write_tcsr(td, CEN | PRESCALE(ps));
+    g_assert_cmphex(tim_read_tcsr(td), ==, CEN | CACT | PRESCALE(ps));
+    g_assert_cmpuint(tim_read_tdr(td), ==, count);
+
+    clock_step(tim_calculate_step(count, ps) - 1);
+
+    g_assert_cmphex(tim_read_tcsr(td), ==, CEN | CACT | PRESCALE(ps));
+    g_assert_cmpuint(tim_read_tdr(td), <, count);
+    g_assert_cmphex(tim_read(td, TISR), ==, 0);
+
+    clock_step(1);
+
+    g_assert_cmphex(tim_read_tcsr(td), ==, PRESCALE(ps));
+    g_assert_cmpuint(tim_read_tdr(td), ==, count);
+    g_assert_cmphex(tim_read(td, TISR), ==, tim_timer_bit(td));
+    g_assert_false(qtest_get_irq(global_qtest, tim_timer_irq(td)));
+}
+
+/* Verifies that a one-shot timer fires when expected with highest prescaler. */
+static void test_oneshot_ps255(gconstpointer test_data)
+{
+    const TestData *td = test_data;
+    unsigned int count = (1U << 24) - 1;
+    unsigned int ps = 255;
+
+    tim_reset(td);
+
+    tim_write_ticr(td, count);
+    tim_write_tcsr(td, CEN | PRESCALE(ps));
+    g_assert_cmphex(tim_read_tcsr(td), ==, CEN | CACT | PRESCALE(ps));
+    g_assert_cmpuint(tim_read_tdr(td), ==, count);
+
+    clock_step(tim_calculate_step(count, ps) - 1);
+
+    g_assert_cmphex(tim_read_tcsr(td), ==, CEN | CACT | PRESCALE(ps));
+    g_assert_cmpuint(tim_read_tdr(td), <, count);
+    g_assert_cmphex(tim_read(td, TISR), ==, 0);
+
+    clock_step(1);
+
+    g_assert_cmphex(tim_read_tcsr(td), ==, PRESCALE(ps));
+    g_assert_cmpuint(tim_read_tdr(td), ==, count);
+    g_assert_cmphex(tim_read(td, TISR), ==, tim_timer_bit(td));
+    g_assert_false(qtest_get_irq(global_qtest, tim_timer_irq(td)));
+}
+
+/* Verifies that a oneshot timer fires an interrupt when expected. */
+static void test_oneshot_interrupt(gconstpointer test_data)
+{
+    const TestData *td = test_data;
+    unsigned int count = 256;
+    unsigned int ps = 7;
+
+    tim_reset(td);
+
+    tim_write_ticr(td, count);
+    tim_write_tcsr(td, IE | CEN | MODE_ONESHOT | PRESCALE(ps));
+
+    clock_step_next();
+
+    g_assert_cmphex(tim_read(td, TISR), ==, tim_timer_bit(td));
+    g_assert_true(qtest_get_irq(global_qtest, tim_timer_irq(td)));
+}
+
+/*
+ * Verifies that the timer can be paused and later resumed, and it still fires
+ * at the right moment.
+ */
+static void test_pause_resume(gconstpointer test_data)
+{
+    const TestData *td = test_data;
+    unsigned int count = 256;
+    unsigned int ps = 1;
+
+    tim_reset(td);
+
+    tim_write_ticr(td, count);
+    tim_write_tcsr(td, IE | CEN | MODE_ONESHOT | PRESCALE(ps));
+
+    /* Pause the timer halfway to expiration. */
+    clock_step(tim_calculate_step(count / 2, ps));
+    tim_write_tcsr(td, IE | MODE_ONESHOT | PRESCALE(ps));
+    g_assert_cmpuint(tim_read_tdr(td), ==, count / 2);
+
+    /* Counter should not advance during the following step. */
+    clock_step(2 * tim_calculate_step(count, ps));
+    g_assert_cmpuint(tim_read_tdr(td), ==, count / 2);
+    g_assert_cmphex(tim_read(td, TISR), ==, 0);
+    g_assert_false(qtest_get_irq(global_qtest, tim_timer_irq(td)));
+
+    /* Resume the timer and run _almost_ to expiration. */
+    tim_write_tcsr(td, IE | CEN | MODE_ONESHOT | PRESCALE(ps));
+    clock_step(tim_calculate_step(count / 2, ps) - 1);
+    g_assert_cmpuint(tim_read_tdr(td), <, count);
+    g_assert_cmphex(tim_read(td, TISR), ==, 0);
+    g_assert_false(qtest_get_irq(global_qtest, tim_timer_irq(td)));
+
+    /* Now, run the rest of the way and verify that the interrupt fires. */
+    clock_step(1);
+    g_assert_cmphex(tim_read(td, TISR), ==, tim_timer_bit(td));
+    g_assert_true(qtest_get_irq(global_qtest, tim_timer_irq(td)));
+}
+
+/* Verifies that the prescaler can be changed while the timer is runnin. */
+static void test_prescaler_change(gconstpointer test_data)
+{
+    const TestData *td = test_data;
+    unsigned int count = 256;
+    unsigned int ps = 5;
+
+    tim_reset(td);
+
+    tim_write_ticr(td, count);
+    tim_write_tcsr(td, CEN | MODE_ONESHOT | PRESCALE(ps));
+
+    /* Run a quarter of the way, and change the prescaler. */
+    clock_step(tim_calculate_step(count / 4, ps));
+    g_assert_cmpuint(tim_read_tdr(td), ==, 3 * count / 4);
+    ps = 2;
+    tim_write_tcsr(td, CEN | MODE_ONESHOT | PRESCALE(ps));
+    /* The counter must not change. */
+    g_assert_cmpuint(tim_read_tdr(td), ==, 3 * count / 4);
+
+    /* Run another quarter of the way, and change the prescaler again. */
+    clock_step(tim_calculate_step(count / 4, ps));
+    g_assert_cmpuint(tim_read_tdr(td), ==, count / 2);
+    ps = 8;
+    tim_write_tcsr(td, CEN | MODE_ONESHOT | PRESCALE(ps));
+    /* The counter must not change. */
+    g_assert_cmpuint(tim_read_tdr(td), ==, count / 2);
+
+    /* Run another quarter of the way, and change the prescaler again. */
+    clock_step(tim_calculate_step(count / 4, ps));
+    g_assert_cmpuint(tim_read_tdr(td), ==, count / 4);
+    ps = 0;
+    tim_write_tcsr(td, CEN | MODE_ONESHOT | PRESCALE(ps));
+    /* The counter must not change. */
+    g_assert_cmpuint(tim_read_tdr(td), ==, count / 4);
+
+    /* Run almost to expiration, and verify the timer didn't fire yet. */
+    clock_step(tim_calculate_step(count / 4, ps) - 1);
+    g_assert_cmpuint(tim_read_tdr(td), <, count);
+    g_assert_cmphex(tim_read(td, TISR), ==, 0);
+
+    /* Now, run the rest of the way and verify that the timer fires. */
+    clock_step(1);
+    g_assert_cmphex(tim_read(td, TISR), ==, tim_timer_bit(td));
+}
+
+/* Verifies that a periodic timer automatically restarts after expiration. */
+static void test_periodic_no_interrupt(gconstpointer test_data)
+{
+    const TestData *td = test_data;
+    unsigned int count = 2;
+    unsigned int ps = 3;
+    int i;
+
+    tim_reset(td);
+
+    tim_write_ticr(td, count);
+    tim_write_tcsr(td, CEN | MODE_PERIODIC | PRESCALE(ps));
+
+    for (i = 0; i < 4; i++) {
+        clock_step_next();
+
+        g_assert_cmphex(tim_read(td, TISR), ==, tim_timer_bit(td));
+        g_assert_false(qtest_get_irq(global_qtest, tim_timer_irq(td)));
+
+        tim_write(td, TISR, tim_timer_bit(td));
+
+        g_assert_cmphex(tim_read(td, TISR), ==, 0);
+        g_assert_false(qtest_get_irq(global_qtest, tim_timer_irq(td)));
+    }
+}
+
+/* Verifies that a periodict timer fires an interrupt every time it expires. */
+static void test_periodic_interrupt(gconstpointer test_data)
+{
+    const TestData *td = test_data;
+    unsigned int count = 65535;
+    unsigned int ps = 2;
+    int i;
+
+    tim_reset(td);
+
+    tim_write_ticr(td, count);
+    tim_write_tcsr(td, CEN | IE | MODE_PERIODIC | PRESCALE(ps));
+
+    for (i = 0; i < 4; i++) {
+        clock_step_next();
+
+        g_assert_cmphex(tim_read(td, TISR), ==, tim_timer_bit(td));
+        g_assert_true(qtest_get_irq(global_qtest, tim_timer_irq(td)));
+
+        tim_write(td, TISR, tim_timer_bit(td));
+
+        g_assert_cmphex(tim_read(td, TISR), ==, 0);
+        g_assert_false(qtest_get_irq(global_qtest, tim_timer_irq(td)));
+    }
+}
+
+/*
+ * Verifies that the timer behaves correctly when disabled right before and
+ * exactly when it's supposed to expire.
+ */
+static void test_disable_on_expiration(gconstpointer test_data)
+{
+    const TestData *td = test_data;
+    unsigned int count = 8;
+    unsigned int ps = 255;
+
+    tim_reset(td);
+
+    tim_write_ticr(td, count);
+    tim_write_tcsr(td, CEN | MODE_ONESHOT | PRESCALE(ps));
+
+    clock_step(tim_calculate_step(count, ps) - 1);
+
+    tim_write_tcsr(td, MODE_ONESHOT | PRESCALE(ps));
+    tim_write_tcsr(td, CEN | MODE_ONESHOT | PRESCALE(ps));
+    clock_step(1);
+    tim_write_tcsr(td, MODE_ONESHOT | PRESCALE(ps));
+    g_assert_cmphex(tim_read(td, TISR), ==, tim_timer_bit(td));
+}
+
+/*
+ * Constructs a name that includes the timer block, timer and testcase name,
+ * and adds the test to the test suite.
+ */
+static void tim_add_test(const char *name, const TestData *td, GTestDataFunc fn)
+{
+    g_autofree char *full_name;
+
+    full_name = g_strdup_printf("npcm7xx_timer/tim[%d]/timer[%d]/%s",
+                                tim_index(td->tim), timer_index(td->timer),
+                                name);
+    qtest_add_data_func(full_name, td, fn);
+}
+
+/* Convenience macro for adding a test with a predictable function name. */
+#define add_test(name, td) tim_add_test(#name, td, test_##name)
+
+int main(int argc, char **argv)
+{
+    TestData testdata[ARRAY_SIZE(timer_block) * ARRAY_SIZE(timer)];
+    int ret;
+    int i, j;
+
+    g_test_init(&argc, &argv, NULL);
+    g_test_set_nonfatal_assertions();
+
+    for (i = 0; i < ARRAY_SIZE(timer_block); i++) {
+        for (j = 0; j < ARRAY_SIZE(timer); j++) {
+            TestData *td = &testdata[i * ARRAY_SIZE(timer) + j];
+            td->tim = &timer_block[i];
+            td->timer = &timer[j];
+
+            add_test(reset, td);
+            add_test(reset_overrides_enable, td);
+            add_test(oneshot_enable_then_disable, td);
+            add_test(oneshot_ps5, td);
+            add_test(oneshot_ps0, td);
+            add_test(oneshot_ps255, td);
+            add_test(oneshot_interrupt, td);
+            add_test(pause_resume, td);
+            add_test(prescaler_change, td);
+            add_test(periodic_no_interrupt, td);
+            add_test(periodic_interrupt, td);
+            add_test(disable_on_expiration, td);
+        }
+    }
+
+    qtest_start("-machine npcm750-evb");
+    qtest_irq_intercept_in(global_qtest, "/machine/soc/a9mpcore/gic");
+    ret = g_test_run();
+    qtest_end();
+
+    return ret;
+}
diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/tests/qtest/meson.build
+++ b/tests/qtest/meson.build
@@ -XXX,XX +XXX,XX @@ qtests_arm = \
   ['arm-cpu-features',
    'microbit-test',
    'm25p80-test',
+   'npcm7xx_timer-test',
    'test-arm-mptimer',
    'boot-serial-test',
    'hexloader-test']
-- 
2.20.1

From: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>

Current documentation is not too clear on the GETPC usage.
In particular, when used outside the top level helper function
it causes unexpected behavior.

Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Message-id: 20201015095147.1691-1-e.emanuelegiuseppe@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 docs/devel/loads-stores.rst | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/docs/devel/loads-stores.rst b/docs/devel/loads-stores.rst
index XXXXXXX..XXXXXXX 100644
--- a/docs/devel/loads-stores.rst
+++ b/docs/devel/loads-stores.rst
@@ -XXX,XX +XXX,XX @@ guest CPU state in case of a guest CPU exception.  This is passed
 to ``cpu_restore_state()``.  Therefore the value should either be 0,
 to indicate that the guest CPU state is already synchronized, or
 the result of ``GETPC()`` from the top level ``HELPER(foo)``
-function, which is a return address into the generated code.
+function, which is a return address into the generated code [#gpc]_.
+
+.. [#gpc] Note that ``GETPC()`` should be used with great care: calling
+          it in other functions that are *not* the top level
+          ``HELPER(foo)`` will cause unexpected behavior. Instead, the
+          value of ``GETPC()`` should be read from the helper and passed
+          if needed to the functions that the helper calls.
 
 Function names follow the pattern:
 
-- 
2.20.1

From: Philippe Mathieu-Daudé <f4bug@amsat.org>

Add trace events for GPU and CPU IRQs.

Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201017180731.1165871-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/intc/bcm2835_ic.c | 4 +++-
 hw/intc/trace-events | 4 ++++
 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/hw/intc/bcm2835_ic.c b/hw/intc/bcm2835_ic.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/intc/bcm2835_ic.c
+++ b/hw/intc/bcm2835_ic.c
@@ -XXX,XX +XXX,XX @@
 #include "migration/vmstate.h"
 #include "qemu/log.h"
 #include "qemu/module.h"
+#include "trace.h"
 
 #define GPU_IRQS 64
 #define ARM_IRQS 8
@@ -XXX,XX +XXX,XX @@ static void bcm2835_ic_update(BCM2835ICState *s)
     set = (s->gpu_irq_level & s->gpu_irq_enable)
         || (s->arm_irq_level & s->arm_irq_enable);
     qemu_set_irq(s->irq, set);
-
 }
 
 static void bcm2835_ic_set_gpu_irq(void *opaque, int irq, int level)
@@ -XXX,XX +XXX,XX @@ static void bcm2835_ic_set_gpu_irq(void *opaque, int irq, int level)
     BCM2835ICState *s = opaque;
 
     assert(irq >= 0 && irq < 64);
+    trace_bcm2835_ic_set_gpu_irq(irq, level);
     s->gpu_irq_level = deposit64(s->gpu_irq_level, irq, 1, level != 0);
     bcm2835_ic_update(s);
 }
@@ -XXX,XX +XXX,XX @@ static void bcm2835_ic_set_arm_irq(void *opaque, int irq, int level)
     BCM2835ICState *s = opaque;
 
     assert(irq >= 0 && irq < 8);
+    trace_bcm2835_ic_set_cpu_irq(irq, level);
     s->arm_irq_level = deposit32(s->arm_irq_level, irq, 1, level != 0);
     bcm2835_ic_update(s);
 }
diff --git a/hw/intc/trace-events b/hw/intc/trace-events
index XXXXXXX..XXXXXXX 100644
--- a/hw/intc/trace-events
+++ b/hw/intc/trace-events
@@ -XXX,XX +XXX,XX @@ nvic_sysreg_write(uint64_t addr, uint32_t value, unsigned size) "NVIC sysreg wri
 heathrow_write(uint64_t addr, unsigned int n, uint64_t value) "0x%"PRIx64" %u: 0x%"PRIx64
 heathrow_read(uint64_t addr, unsigned int n, uint64_t value) "0x%"PRIx64" %u: 0x%"PRIx64
 heathrow_set_irq(int num, int level) "set_irq: num=0x%02x level=%d"
+
+# bcm2835_ic.c
+bcm2835_ic_set_gpu_irq(int irq, int level) "GPU irq #%d level %d"
+bcm2835_ic_set_cpu_irq(int irq, int level) "CPU irq #%d level %d"
-- 
2.20.1

From: Philippe Mathieu-Daudé <f4bug@amsat.org>

The IRQ values are defined few lines earlier, use them instead of
the magic numbers.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201017180731.1165871-3-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/intc/bcm2836_control.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/hw/intc/bcm2836_control.c b/hw/intc/bcm2836_control.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/intc/bcm2836_control.c
+++ b/hw/intc/bcm2836_control.c
@@ -XXX,XX +XXX,XX @@ static void bcm2836_control_set_local_irq(void *opaque, int core, int local_irq,
 
 static void bcm2836_control_set_local_irq0(void *opaque, int core, int level)
 {
-    bcm2836_control_set_local_irq(opaque, core, 0, level);
+    bcm2836_control_set_local_irq(opaque, core, IRQ_CNTPSIRQ, level);
 }
 
 static void bcm2836_control_set_local_irq1(void *opaque, int core, int level)
 {
-    bcm2836_control_set_local_irq(opaque, core, 1, level);
+    bcm2836_control_set_local_irq(opaque, core, IRQ_CNTPNSIRQ, level);
 }
 
 static void bcm2836_control_set_local_irq2(void *opaque, int core, int level)
 {
-    bcm2836_control_set_local_irq(opaque, core, 2, level);
+    bcm2836_control_set_local_irq(opaque, core, IRQ_CNTHPIRQ, level);
 }
 
 static void bcm2836_control_set_local_irq3(void *opaque, int core, int level)
 {
-    bcm2836_control_set_local_irq(opaque, core, 3, level);
+    bcm2836_control_set_local_irq(opaque, core, IRQ_CNTVIRQ, level);
 }
 
 static void bcm2836_control_set_gpu_irq(void *opaque, int irq, int level)
-- 
2.20.1

From: Richard Henderson <richard.henderson@linaro.org>

We already have the full ARMMMUIdx as computed from the
function parameter.

For the purpose of regime_has_2_ranges, we can ignore any
difference between AccType_Normal and AccType_Unpriv, which
would be the only difference between the passed mmu_idx
and arm_mmu_idx_el.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Message-id: 20201008162155.161886-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/mte_helper.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/target/arm/mte_helper.c b/target/arm/mte_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/mte_helper.c
+++ b/target/arm/mte_helper.c
@@ -XXX,XX +XXX,XX @@ static void mte_check_fail(CPUARMState *env, uint32_t desc,
 
     case 2:
         /* Tag check fail causes asynchronous flag set.  */
-        mmu_idx = arm_mmu_idx_el(env, el);
-        if (regime_has_2_ranges(mmu_idx)) {
+        if (regime_has_2_ranges(arm_mmu_idx)) {
             select = extract64(dirty_ptr, 55, 1);
         } else {
             select = 0;
-- 
2.20.1

From: Richard Henderson <richard.henderson@linaro.org>

The reporting in AArch64.TagCheckFail only depends on PSTATE.EL,
and not the AccType of the operation.  There are two guest
visible problems that affect LDTR and STTR because of this:

(1) Selecting TCF0 vs TCF1 to decide on reporting,
(2) Report "data abort same el" not "data abort lower el".

Reported-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Message-id: 20201008162155.161886-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/mte_helper.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/target/arm/mte_helper.c b/target/arm/mte_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/mte_helper.c
+++ b/target/arm/mte_helper.c
@@ -XXX,XX +XXX,XX @@ static void mte_check_fail(CPUARMState *env, uint32_t desc,
     reg_el = regime_el(env, arm_mmu_idx);
     sctlr = env->cp15.sctlr_el[reg_el];
 
-    switch (arm_mmu_idx) {
-    case ARMMMUIdx_E10_0:
-    case ARMMMUIdx_E20_0:
-        el = 0;
+    el = arm_current_el(env);
+    if (el == 0) {
         tcf = extract64(sctlr, 38, 2);
-        break;
-    default:
-        el = reg_el;
+    } else {
         tcf = extract64(sctlr, 40, 2);
     }
 
-- 
2.20.1

From: Richard Henderson <richard.henderson@linaro.org>

Unlike many other bits in HCR_EL2, the description for this
bit does not contain the phrase "if ... this field behaves
as 0 for all purposes other than", so do not squash the bit
in arm_hcr_el2_eff.

Instead, replicate the E2H+TGE test in the two places that
require it.

Reported-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Message-id: 20201008162155.161886-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/internals.h | 9 +++++----
 target/arm/helper.c    | 9 +++++----
 2 files changed, 10 insertions(+), 8 deletions(-)

diff --git a/target/arm/internals.h b/target/arm/internals.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/internals.h
+++ b/target/arm/internals.h
@@ -XXX,XX +XXX,XX @@ static inline bool allocation_tag_access_enabled(CPUARMState *env, int el,
         && !(env->cp15.scr_el3 & SCR_ATA)) {
         return false;
     }
-    if (el < 2
-        && arm_feature(env, ARM_FEATURE_EL2)
-        && !(arm_hcr_el2_eff(env) & HCR_ATA)) {
-        return false;
+    if (el < 2 && arm_feature(env, ARM_FEATURE_EL2)) {
+        uint64_t hcr = arm_hcr_el2_eff(env);
+        if (!(hcr & HCR_ATA) && (!(hcr & HCR_E2H) || !(hcr & HCR_TGE))) {
+            return false;
+        }
     }
     sctlr &= (el == 0 ? SCTLR_ATA0 : SCTLR_ATA);
     return sctlr != 0;
diff --git a/target/arm/helper.c b/target/arm/helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -XXX,XX +XXX,XX @@ static CPAccessResult access_mte(CPUARMState *env, const ARMCPRegInfo *ri,
 {
     int el = arm_current_el(env);
 
-    if (el < 2 &&
-        arm_feature(env, ARM_FEATURE_EL2) &&
-        !(arm_hcr_el2_eff(env) & HCR_ATA)) {
-        return CP_ACCESS_TRAP_EL2;
+    if (el < 2 && arm_feature(env, ARM_FEATURE_EL2)) {
+        uint64_t hcr = arm_hcr_el2_eff(env);
+        if (!(hcr & HCR_ATA) && (!(hcr & HCR_E2H) || !(hcr & HCR_TGE))) {
+            return CP_ACCESS_TRAP_EL2;
+        }
     }
     if (el < 3 &&
         arm_feature(env, ARM_FEATURE_EL3) &&
-- 
2.20.1

From: Peng Liang <liangpeng10@huawei.com>

VMStateDescription.fields should be end with VMSTATE_END_OF_LIST().
However, microbit_i2c_vmstate doesn't follow it.  Let's change it.

Fixes: 9d68bf564e ("arm: Stub out NRF51 TWI magnetometer/accelerometer detection")
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Peng Liang <liangpeng10@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201019093401.2993833-1-liangpeng10@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/i2c/microbit_i2c.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/hw/i2c/microbit_i2c.c b/hw/i2c/microbit_i2c.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/i2c/microbit_i2c.c
+++ b/hw/i2c/microbit_i2c.c
@@ -XXX,XX +XXX,XX @@ static const VMStateDescription microbit_i2c_vmstate = {
     .fields = (VMStateField[]) {
         VMSTATE_UINT32_ARRAY(regs, MicrobitI2CState, MICROBIT_I2C_NREGS),
         VMSTATE_UINT32(read_idx, MicrobitI2CState),
+        VMSTATE_END_OF_LIST()
     },
 };
 
-- 
2.20.1

From: Philippe Mathieu-Daudé <f4bug@amsat.org>

Commit 7998beb9c2e removed the ram_size initialization in the
arm_boot_info structure, however it is used by arm_load_kernel().

Initialize the field to fix:

$ qemu-system-arm -M n800 -append 'console=ttyS1' \
    -kernel meego-arm-n8x0-1.0.80.20100712.1431-vmlinuz-2.6.35~rc4-129.1-n8x0
  qemu-system-arm: kernel 'meego-arm-n8x0-1.0.80.20100712.1431-vmlinuz-2.6.35~rc4-129.1-n8x0' is too large to fit in RAM (kernel size 1964608, RAM size 0)

Noticed while running the test introduced in commit 050a82f0c5b
("tests/acceptance: Add a test for the N800 and N810 arm machines").

Fixes: 7998beb9c2e ("arm/nseries: use memdev for RAM")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-id: 20201019095148.1602119-1-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/nseries.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/nseries.c
+++ b/hw/arm/nseries.c
@@ -XXX,XX +XXX,XX @@ static void n8x0_init(MachineState *machine,
         g_free(sz);
         exit(EXIT_FAILURE);
     }
+    binfo->ram_size = machine->ram_size;
 
     memory_region_add_subregion(get_system_memory(), OMAP2_Q2_BASE,
                                 machine->ram);
-- 
2.20.1

For nested groups like:

{
    [
      pattern 1
      pattern 2
    ]
    pattern 3
  }

the intended behaviour is that patterns 1 and 2 must not
overlap with each other; if the insn matches neither then
we fall through to pattern 3 as the next thing in the
outer overlapping group.

Currently we generate incorrect code for this situation,
because in the code path for a failed match inside the
inner non-overlapping group we generate a "return" statement,
which causes decode to stop entirely rather than continuing
to the next thing in the outer group.

Generate a "break" instead, so that decode flow behaves
as required for this nested group case.

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20201019151301.2046-2-peter.maydell@linaro.org
---
 scripts/decodetree.py | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/scripts/decodetree.py b/scripts/decodetree.py
index XXXXXXX..XXXXXXX 100644
--- a/scripts/decodetree.py
+++ b/scripts/decodetree.py
@@ -XXX,XX +XXX,XX @@ class Tree:
             output(ind, '    /* ',
                    str_match_bits(innerbits, innermask), ' */\n')
             s.output_code(i + 4, extracted, innerbits, innermask)
-            output(ind, '    return false;\n')
+            output(ind, '    break;\n')
         output(ind, '}\n')
 # end Tree
 
-- 
2.20.1

From v8.1M, disabled-coprocessor handling changes slightly:
 * coprocessors 8, 9, 14 and 15 are also governed by the
   cp10 enable bit, like cp11
 * an extra range of instruction patterns is considered
   to be inside the coprocessor space

We previously marked these up with TODO comments; implement the
correct behaviour.

Unfortunately there is no ID register field which indicates this
behaviour.  We could in theory test an unrelated ID register which
indicates guaranteed-to-be-in-v8.1M behaviour like ID_ISAR0.CmpBranch
>= 3 (low-overhead-loops), but it seems better to simply define a new
ARM_FEATURE_V8_1M feature flag and use it for this and other
new-in-v8.1M behaviour that isn't identifiable from the ID registers.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201019151301.2046-3-peter.maydell@linaro.org
---
 target/arm/cpu.h               |  1 +
 target/arm/m-nocp.decode       | 10 ++++++----
 target/arm/translate-vfp.c.inc | 17 +++++++++++++++--
 3 files changed, 22 insertions(+), 6 deletions(-)

diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -XXX,XX +XXX,XX @@ enum arm_features {
     ARM_FEATURE_VBAR, /* has cp15 VBAR */
     ARM_FEATURE_M_SECURITY, /* M profile Security Extension */
     ARM_FEATURE_M_MAIN, /* M profile Main Extension */
+    ARM_FEATURE_V8_1M, /* M profile extras only in v8.1M and later */
 };
 
 static inline int arm_feature(CPUARMState *env, int feature)
diff --git a/target/arm/m-nocp.decode b/target/arm/m-nocp.decode
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/m-nocp.decode
+++ b/target/arm/m-nocp.decode
@@ -XXX,XX +XXX,XX @@
 # If the coprocessor is not present or disabled then we will generate
 # the NOCP exception; otherwise we let the insn through to the main decode.
 
+&nocp cp
+
 {
   # Special cases which do not take an early NOCP: VLLDM and VLSTM
   VLLDM_VLSTM  1110 1100 001 l:1 rn:4 0000 1010 0000 0000
   # TODO: VSCCLRM (new in v8.1M) is similar:
   #VSCCLRM      1110 1100 1-01 1111 ---- 1011 ---- ---0
 
-  NOCP         111- 1110 ---- ---- ---- cp:4 ---- ----
-  NOCP         111- 110- ---- ---- ---- cp:4 ---- ----
-  # TODO: From v8.1M onwards we will also want this range to NOCP
-  #NOCP_8_1     111- 1111 ---- ---- ---- ---- ---- ---- cp=10
+  NOCP         111- 1110 ---- ---- ---- cp:4 ---- ---- &nocp
+  NOCP         111- 110- ---- ---- ---- cp:4 ---- ---- &nocp
+  # From v8.1M onwards this range will also NOCP:
+  NOCP_8_1     111- 1111 ---- ---- ---- ---- ---- ---- &nocp cp=10
 }
diff --git a/target/arm/translate-vfp.c.inc b/target/arm/translate-vfp.c.inc
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/translate-vfp.c.inc
+++ b/target/arm/translate-vfp.c.inc
@@ -XXX,XX +XXX,XX @@ static bool trans_VLLDM_VLSTM(DisasContext *s, arg_VLLDM_VLSTM *a)
     return true;
 }
 
-static bool trans_NOCP(DisasContext *s, arg_NOCP *a)
+static bool trans_NOCP(DisasContext *s, arg_nocp *a)
 {
     /*
      * Handle M-profile early check for disabled coprocessor:
@@ -XXX,XX +XXX,XX @@ static bool trans_NOCP(DisasContext *s, arg_NOCP *a)
     if (a->cp == 11) {
         a->cp = 10;
     }
-    /* TODO: in v8.1M cp 8, 9, 14, 15 also are governed by the cp10 enable */
+    if (arm_dc_feature(s, ARM_FEATURE_V8_1M) &&
+        (a->cp == 8 || a->cp == 9 || a->cp == 14 || a->cp == 15)) {
+        /* in v8.1M cp 8, 9, 14, 15 also are governed by the cp10 enable */
+        a->cp = 10;
+    }
 
     if (a->cp != 10) {
         gen_exception_insn(s, s->pc_curr, EXCP_NOCP,
@@ -XXX,XX +XXX,XX @@ static bool trans_NOCP(DisasContext *s, arg_NOCP *a)
     return false;
 }
 
+static bool trans_NOCP_8_1(DisasContext *s, arg_nocp *a)
+{
+    /* This range needs a coprocessor check for v8.1M and later only */
+    if (!arm_dc_feature(s, ARM_FEATURE_V8_1M)) {
+        return false;
+    }
+    return trans_NOCP(s, a);
+}
+
 static bool trans_VINS(DisasContext *s, arg_VINS *a)
 {
     TCGv_i32 rd, rm;
-- 
2.20.1

v8.1M brings four new insns to M-profile:
 * CSEL  : Rd = cond ? Rn : Rm
 * CSINC : Rd = cond ? Rn : Rm+1
 * CSINV : Rd = cond ? Rn : ~Rm
 * CSNEG : Rd = cond ? Rn : -Rm

Implement these.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20201019151301.2046-4-peter.maydell@linaro.org
---
 target/arm/t32.decode  |  3 +++
 target/arm/translate.c | 60 ++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 63 insertions(+)

diff --git a/target/arm/t32.decode b/target/arm/t32.decode
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/t32.decode
+++ b/target/arm/t32.decode
@@ -XXX,XX +XXX,XX @@ SBC_rrri         1110101 1011 . .... 0 ... .... .... ....     @s_rrr_shi
 }
 RSB_rrri         1110101 1110 . .... 0 ... .... .... ....     @s_rrr_shi
 
+# v8.1M CSEL and friends
+CSEL             1110101 0010 1 rn:4 10 op:2 rd:4 fcond:4 rm:4
+
 # Data-processing (register-shifted register)
 
 MOV_rxrr         1111 1010 0 shty:2 s:1 rm:4 1111 rd:4 0000 rs:4 \
diff --git a/target/arm/translate.c b/target/arm/translate.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/translate.c
+++ b/target/arm/translate.c
@@ -XXX,XX +XXX,XX @@ static bool trans_IT(DisasContext *s, arg_IT *a)
     return true;
 }
 
+/* v8.1M CSEL/CSINC/CSNEG/CSINV */
+static bool trans_CSEL(DisasContext *s, arg_CSEL *a)
+{
+    TCGv_i32 rn, rm, zero;
+    DisasCompare c;
+
+    if (!arm_dc_feature(s, ARM_FEATURE_V8_1M)) {
+        return false;
+    }
+
+    if (a->rm == 13) {
+        /* SEE "Related encodings" (MVE shifts) */
+        return false;
+    }
+
+    if (a->rd == 13 || a->rd == 15 || a->rn == 13 || a->fcond >= 14) {
+        /* CONSTRAINED UNPREDICTABLE: we choose to UNDEF */
+        return false;
+    }
+
+    /* In this insn input reg fields of 0b1111 mean "zero", not "PC" */
+    if (a->rn == 15) {
+        rn = tcg_const_i32(0);
+    } else {
+        rn = load_reg(s, a->rn);
+    }
+    if (a->rm == 15) {
+        rm = tcg_const_i32(0);
+    } else {
+        rm = load_reg(s, a->rm);
+    }
+
+    switch (a->op) {
+    case 0: /* CSEL */
+        break;
+    case 1: /* CSINC */
+        tcg_gen_addi_i32(rm, rm, 1);
+        break;
+    case 2: /* CSINV */
+        tcg_gen_not_i32(rm, rm);
+        break;
+    case 3: /* CSNEG */
+        tcg_gen_neg_i32(rm, rm);
+        break;
+    default:
+        g_assert_not_reached();
+    }
+
+    arm_test_cc(&c, a->fcond);
+    zero = tcg_const_i32(0);
+    tcg_gen_movcond_i32(c.cond, rn, c.value, zero, rn, rm);
+    arm_free_cc(&c);
+    tcg_temp_free_i32(zero);
+
+    store_reg(s, a->rd, rn);
+    tcg_temp_free_i32(rm);
+
+    return true;
+}
+
 /*
  * Legacy decoder.
  */
-- 
2.20.1

The t32 decode has a group which represents a set of insns
which overlap with B_cond_thumb because they have [25:23]=111
(which is an invalid condition code field for the branch insn).
This group is currently defined using the {} overlap-OK syntax,
but it is almost entirely non-overlapping patterns. Switch
it over to use a non-overlapping group.

For this to be valid syntactically, CPS must move into the same
overlapping-group as the hint insns (CPS vs hints was the
only actual use of the overlap facility for the group).

The non-overlapping subgroup for CLREX/DSB/DMB/ISB/SB is no longer
necessary and so we can remove it (promoting those insns to
be members of the parent group).

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20201019151301.2046-5-peter.maydell@linaro.org
---
 target/arm/t32.decode | 26 ++++++++++++--------------
 1 file changed, 12 insertions(+), 14 deletions(-)

diff --git a/target/arm/t32.decode b/target/arm/t32.decode
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/t32.decode
+++ b/target/arm/t32.decode
@@ -XXX,XX +XXX,XX @@ CLZ              1111 1010 1011 ---- 1111 .... 1000 ....      @rdm
 {
   # Group insn[25:23] = 111, which is cond=111x for the branch below,
   # or unconditional, which would be illegal for the branch.
-  {
-    # Hints
+  [
+    # Hints, and CPS
     {
       YIELD      1111 0011 1010 1111 1000 0000 0000 0001
       WFE        1111 0011 1010 1111 1000 0000 0000 0010
@@ -XXX,XX +XXX,XX @@ CLZ              1111 1010 1011 ---- 1111 .... 1000 ....      @rdm
       # The canonical nop ends in 0000 0000, but the whole rest
       # of the space is "reserved hint, behaves as nop".
       NOP        1111 0011 1010 1111 1000 0000 ---- ----
+
+      # If imod == '00' && M == '0' then SEE "Hint instructions", above.
+      CPS        1111 0011 1010 1111 1000 0 imod:2 M:1 A:1 I:1 F:1 mode:5 \
+                 &cps
     }
 
-    # If imod == '00' && M == '0' then SEE "Hint instructions", above.
-    CPS          1111 0011 1010 1111 1000 0 imod:2 M:1 A:1 I:1 F:1 mode:5 \
-                 &cps
-
     # Miscellaneous control
-    [
-      CLREX      1111 0011 1011 1111 1000 1111 0010 1111
-      DSB        1111 0011 1011 1111 1000 1111 0100 ----
-      DMB        1111 0011 1011 1111 1000 1111 0101 ----
-      ISB        1111 0011 1011 1111 1000 1111 0110 ----
-      SB         1111 0011 1011 1111 1000 1111 0111 0000
-    ]
+    CLREX        1111 0011 1011 1111 1000 1111 0010 1111
+    DSB          1111 0011 1011 1111 1000 1111 0100 ----
+    DMB          1111 0011 1011 1111 1000 1111 0101 ----
+    ISB          1111 0011 1011 1111 1000 1111 0110 ----
+    SB           1111 0011 1011 1111 1000 1111 0111 0000
 
     # Note that the v7m insn overlaps both the normal and banked insn.
     {
@@ -XXX,XX +XXX,XX @@ CLZ              1111 1010 1011 ---- 1111 .... 1000 ....      @rdm
     HVC          1111 0111 1110 ....  1000 .... .... ....     \
                  &i imm=%imm16_16_0
     UDF          1111 0111 1111 ----  1010 ---- ---- ----
-  }
+  ]
   B_cond_thumb   1111 0. cond:4 ...... 10.0 ............      &ci imm=%imm21
 }
 
-- 
2.20.1

The BLX immediate insn in the Thumb encoding always performs
a switch from Thumb to Arm state. This would be totally useless
in M-profile which has no Arm decoder, and so the instruction
does not exist at all there. Make the encoding UNDEF for M-profile.

(This part of the encoding space is used for the branch-future
and low-overhead-loop insns in v8.1M.)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20201019151301.2046-6-peter.maydell@linaro.org
---
 target/arm/translate.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/target/arm/translate.c b/target/arm/translate.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/translate.c
+++ b/target/arm/translate.c
@@ -XXX,XX +XXX,XX @@ static bool trans_BLX_i(DisasContext *s, arg_BLX_i *a)
 {
     TCGv_i32 tmp;
 
+    /*
+     * BLX <imm> would be useless on M-profile; the encoding space
+     * is used for other insns from v8.1M onward, and UNDEFs before that.
+     */
+    if (arm_dc_feature(s, ARM_FEATURE_M)) {
+        return false;
+    }
+
     /* For A32, ARM_FEATURE_V5 is checked near the start of the uncond block. */
     if (s->thumb && (a->imm & 2)) {
         return false;
-- 
2.20.1

v8.1M implements a new 'branch future' feature, which is a
set of instructions that request the CPU to perform a branch
"in the future", when it reaches a particular execution address.
In hardware, the expected implementation is that the information
about the branch location and destination is cached and then
acted upon when execution reaches the specified address.
However the architecture permits an implementation to discard
this cached information at any point, and so guest code must
always include a normal branch insn at the branch point as
a fallback. In particular, an implementation is specifically
permitted to treat all BF insns as NOPs (which is equivalent
to discarding the cached information immediately).

For QEMU, implementing this caching of branch information
would be complicated and would not improve the speed of
execution at all, so we make the IMPDEF choice to implement
all BF insns as NOPs.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20201019151301.2046-7-peter.maydell@linaro.org
---
 target/arm/cpu.h       |  6 ++++++
 target/arm/t32.decode  | 13 ++++++++++++-
 target/arm/translate.c | 20 ++++++++++++++++++++
 3 files changed, 38 insertions(+), 1 deletion(-)

diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa32_arm_div(const ARMISARegisters *id)
     return FIELD_EX32(id->id_isar0, ID_ISAR0, DIVIDE) > 1;
 }
 
+static inline bool isar_feature_aa32_lob(const ARMISARegisters *id)
+{
+    /* (M-profile) low-overhead loops and branch future */
+    return FIELD_EX32(id->id_isar0, ID_ISAR0, CMPBRANCH) >= 3;
+}
+
 static inline bool isar_feature_aa32_jazelle(const ARMISARegisters *id)
 {
     return FIELD_EX32(id->id_isar1, ID_ISAR1, JAZELLE) != 0;
diff --git a/target/arm/t32.decode b/target/arm/t32.decode
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/t32.decode
+++ b/target/arm/t32.decode
@@ -XXX,XX +XXX,XX @@ MRC              1110 1110 ... 1 .... .... .... ... 1 .... @mcr
 
 B                1111 0. .......... 10.1 ............         @branch24
 BL               1111 0. .......... 11.1 ............         @branch24
-BLX_i            1111 0. .......... 11.0 ............         @branch24
+{
+  # BLX_i is non-M-profile only
+  BLX_i          1111 0. .......... 11.0 ............         @branch24
+  # M-profile only: loop and branch insns
+  [
+    # All these BF insns have boff != 0b0000; we NOP them all
+    BF           1111 0 boff:4  ------- 1100 - ---------- 1    # BFL
+    BF           1111 0 boff:4 0 ------ 1110 - ---------- 1    # BFCSEL
+    BF           1111 0 boff:4 10 ----- 1110 - ---------- 1    # BF
+    BF           1111 0 boff:4 11 ----- 1110 0 0000000000 1    # BFX, BFLX
+  ]
+}
diff --git a/target/arm/translate.c b/target/arm/translate.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/translate.c
+++ b/target/arm/translate.c
@@ -XXX,XX +XXX,XX @@ static bool trans_BLX_suffix(DisasContext *s, arg_BLX_suffix *a)
     return true;
 }
 
+static bool trans_BF(DisasContext *s, arg_BF *a)
+{
+    /*
+     * M-profile branch future insns. The architecture permits an
+     * implementation to implement these as NOPs (equivalent to
+     * discarding the LO_BRANCH_INFO cache immediately), and we
+     * take that IMPDEF option because for QEMU a "real" implementation
+     * would be complicated and wouldn't execute any faster.
+     */
+    if (!dc_isar_feature(aa32_lob, s)) {
+        return false;
+    }
+    if (a->boff == 0) {
+        /* SEE "Related encodings" (loop insns) */
+        return false;
+    }
+    /* Handle as NOP */
+    return true;
+}
+
 static bool op_tbranch(DisasContext *s, arg_tbranch *a, bool half)
 {
     TCGv_i32 addr, tmp;
-- 
2.20.1

v8.1M's "low-overhead-loop" extension has three instructions
for looping:
 * DLS (start of a do-loop)
 * WLS (start of a while-loop)
 * LE (end of a loop)

The loop-start instructions are both simple operations to start a
loop whose iteration count (if any) is in LR.  The loop-end
instruction handles "decrement iteration count and jump back to loop
start"; it also caches the information about the branch back to the
start of the loop to improve performance of the branch on subsequent
iterations.

As with the branch-future instructions, the architecture permits an
implementation to discard the LO_BRANCH_INFO cache at any time, and
QEMU takes the IMPDEF option to never set it in the first place
(equivalent to discarding it immediately), because for us a "real"
implementation would be unnecessary complexity.

(This implementation only provides the simple looping constructs; the
vector extension MVE (Helium) adds some extra variants to handle
looping across vectors.  We'll add those later when we implement
MVE.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201019151301.2046-8-peter.maydell@linaro.org
---
 target/arm/t32.decode  |  8 ++++
 target/arm/translate.c | 93 +++++++++++++++++++++++++++++++++++++++++-
 2 files changed, 99 insertions(+), 2 deletions(-)

diff --git a/target/arm/t32.decode b/target/arm/t32.decode
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/t32.decode
+++ b/target/arm/t32.decode
@@ -XXX,XX +XXX,XX @@ BL               1111 0. .......... 11.1 ............         @branch24
     BF           1111 0 boff:4 10 ----- 1110 - ---------- 1    # BF
     BF           1111 0 boff:4 11 ----- 1110 0 0000000000 1    # BFX, BFLX
   ]
+  [
+    # LE and WLS immediate
+    %lob_imm 1:10 11:1 !function=times_2
+
+    DLS          1111 0 0000 100     rn:4 1110 0000 0000 0001
+    WLS          1111 0 0000 100     rn:4 1100 . .......... 1 imm=%lob_imm
+    LE           1111 0 0000 0 f:1 0 1111 1100 . .......... 1 imm=%lob_imm
+  ]
 }
diff --git a/target/arm/translate.c b/target/arm/translate.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/translate.c
+++ b/target/arm/translate.c
@@ -XXX,XX +XXX,XX @@ static void gen_goto_tb(DisasContext *s, int n, target_ulong dest)
     s->base.is_jmp = DISAS_NORETURN;
 }
 
-static inline void gen_jmp (DisasContext *s, uint32_t dest)
+/* Jump, specifying which TB number to use if we gen_goto_tb() */
+static inline void gen_jmp_tb(DisasContext *s, uint32_t dest, int tbno)
 {
     if (unlikely(is_singlestepping(s))) {
         /* An indirect jump so that we still trigger the debug exception.  */
         gen_set_pc_im(s, dest);
         s->base.is_jmp = DISAS_JUMP;
     } else {
-        gen_goto_tb(s, 0, dest);
+        gen_goto_tb(s, tbno, dest);
     }
 }
 
+static inline void gen_jmp(DisasContext *s, uint32_t dest)
+{
+    gen_jmp_tb(s, dest, 0);
+}
+
 static inline void gen_mulxy(TCGv_i32 t0, TCGv_i32 t1, int x, int y)
 {
     if (x)
@@ -XXX,XX +XXX,XX @@ static bool trans_BF(DisasContext *s, arg_BF *a)
     return true;
 }
 
+static bool trans_DLS(DisasContext *s, arg_DLS *a)
+{
+    /* M-profile low-overhead loop start */
+    TCGv_i32 tmp;
+
+    if (!dc_isar_feature(aa32_lob, s)) {
+        return false;
+    }
+    if (a->rn == 13 || a->rn == 15) {
+        /* CONSTRAINED UNPREDICTABLE: we choose to UNDEF */
+        return false;
+    }
+
+    /* Not a while loop, no tail predication: just set LR to the count */
+    tmp = load_reg(s, a->rn);
+    store_reg(s, 14, tmp);
+    return true;
+}
+
+static bool trans_WLS(DisasContext *s, arg_WLS *a)
+{
+    /* M-profile low-overhead while-loop start */
+    TCGv_i32 tmp;
+    TCGLabel *nextlabel;
+
+    if (!dc_isar_feature(aa32_lob, s)) {
+        return false;
+    }
+    if (a->rn == 13 || a->rn == 15) {
+        /* CONSTRAINED UNPREDICTABLE: we choose to UNDEF */
+        return false;
+    }
+    if (s->condexec_mask) {
+        /*
+         * WLS in an IT block is CONSTRAINED UNPREDICTABLE;
+         * we choose to UNDEF, because otherwise our use of
+         * gen_goto_tb(1) would clash with the use of TB exit 1
+         * in the dc->condjmp condition-failed codepath in
+         * arm_tr_tb_stop() and we'd get an assertion.
+         */
+        return false;
+    }
+    nextlabel = gen_new_label();
+    tcg_gen_brcondi_i32(TCG_COND_EQ, cpu_R[a->rn], 0, nextlabel);
+    tmp = load_reg(s, a->rn);
+    store_reg(s, 14, tmp);
+    gen_jmp_tb(s, s->base.pc_next, 1);
+
+    gen_set_label(nextlabel);
+    gen_jmp(s, read_pc(s) + a->imm);
+    return true;
+}
+
+static bool trans_LE(DisasContext *s, arg_LE *a)
+{
+    /*
+     * M-profile low-overhead loop end. The architecture permits an
+     * implementation to discard the LO_BRANCH_INFO cache at any time,
+     * and we take the IMPDEF option to never set it in the first place
+     * (equivalent to always discarding it immediately), because for QEMU
+     * a "real" implementation would be complicated and wouldn't execute
+     * any faster.
+     */
+    TCGv_i32 tmp;
+
+    if (!dc_isar_feature(aa32_lob, s)) {
+        return false;
+    }
+
+    if (!a->f) {
+        /* Not loop-forever. If LR <= 1 this is the last loop: do nothing. */
+        arm_gen_condlabel(s);
+        tcg_gen_brcondi_i32(TCG_COND_LEU, cpu_R[14], 1, s->condlabel);
+        /* Decrement LR */
+        tmp = load_reg(s, 14);
+        tcg_gen_addi_i32(tmp, tmp, -1);
+        store_reg(s, 14, tmp);
+    }
+    /* Jump back to the loop start */
+    gen_jmp(s, read_pc(s) - a->imm);
+    return true;
+}
+
 static bool op_tbranch(DisasContext *s, arg_tbranch *a, bool half)
 {
     TCGv_i32 addr, tmp;
-- 
2.20.1

In arm_cpu_realizefn(), if the CPU has VFP or Neon disabled then we
squash the ID register fields so that we don't advertise it to the
guest.  This code was written for A-profile and needs some tweaks to
work correctly on M-profile:

* A-profile only fields should not be zeroed on M-profile:
   - MVFR0.FPSHVEC,FPTRAP
   - MVFR1.SIMDLS,SIMDINT,SIMDSP,SIMDHP
   - MVFR2.SIMDMISC
 * M-profile only fields should be zeroed on M-profile:
   - MVFR1.FP16

In particular, because MVFR1.SIMDHP on A-profile is the same field as
MVFR1.FP16 on M-profile this code was incorrectly disabling FP16
support on an M-profile CPU (where has_neon is always false).  This
isn't a visible bug yet because we don't have any M-profile CPUs with
FP16 support, but the change is necessary before we introduce any.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20201019151301.2046-9-peter.maydell@linaro.org
---
 target/arm/cpu.c | 29 ++++++++++++++++++-----------
 1 file changed, 18 insertions(+), 11 deletions(-)

diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp)
         u = cpu->isar.mvfr0;
         u = FIELD_DP32(u, MVFR0, FPSP, 0);
         u = FIELD_DP32(u, MVFR0, FPDP, 0);
-        u = FIELD_DP32(u, MVFR0, FPTRAP, 0);
         u = FIELD_DP32(u, MVFR0, FPDIVIDE, 0);
         u = FIELD_DP32(u, MVFR0, FPSQRT, 0);
-        u = FIELD_DP32(u, MVFR0, FPSHVEC, 0);
         u = FIELD_DP32(u, MVFR0, FPROUND, 0);
+        if (!arm_feature(env, ARM_FEATURE_M)) {
+            u = FIELD_DP32(u, MVFR0, FPTRAP, 0);
+            u = FIELD_DP32(u, MVFR0, FPSHVEC, 0);
+        }
         cpu->isar.mvfr0 = u;
 
         u = cpu->isar.mvfr1;
         u = FIELD_DP32(u, MVFR1, FPFTZ, 0);
         u = FIELD_DP32(u, MVFR1, FPDNAN, 0);
         u = FIELD_DP32(u, MVFR1, FPHP, 0);
+        if (arm_feature(env, ARM_FEATURE_M)) {
+            u = FIELD_DP32(u, MVFR1, FP16, 0);
+        }
         cpu->isar.mvfr1 = u;
 
         u = cpu->isar.mvfr2;
@@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp)
         u = FIELD_DP32(u, ID_ISAR6, FHM, 0);
         cpu->isar.id_isar6 = u;
 
-        u = cpu->isar.mvfr1;
-        u = FIELD_DP32(u, MVFR1, SIMDLS, 0);
-        u = FIELD_DP32(u, MVFR1, SIMDINT, 0);
-        u = FIELD_DP32(u, MVFR1, SIMDSP, 0);
-        u = FIELD_DP32(u, MVFR1, SIMDHP, 0);
-        cpu->isar.mvfr1 = u;
+        if (!arm_feature(env, ARM_FEATURE_M)) {
+            u = cpu->isar.mvfr1;
+            u = FIELD_DP32(u, MVFR1, SIMDLS, 0);
+            u = FIELD_DP32(u, MVFR1, SIMDINT, 0);
+            u = FIELD_DP32(u, MVFR1, SIMDSP, 0);
+            u = FIELD_DP32(u, MVFR1, SIMDHP, 0);
+            cpu->isar.mvfr1 = u;
 
-        u = cpu->isar.mvfr2;
-        u = FIELD_DP32(u, MVFR2, SIMDMISC, 0);
-        cpu->isar.mvfr2 = u;
+            u = cpu->isar.mvfr2;
+            u = FIELD_DP32(u, MVFR2, SIMDMISC, 0);
+            cpu->isar.mvfr2 = u;
+        }
     }
 
     if (!cpu->has_neon && !cpu->has_vfp) {
-- 
2.20.1

M-profile CPUs with half-precision floating point support should
be able to write to FPSCR.FZ16, but an M-profile specific masking
of the value at the top of vfp_set_fpscr() currently prevents that.
This is not yet an active bug because we have no M-profile
FP16 CPUs, but needs to be fixed before we can add any.

The bits that the masking is effectively preventing from being
set are the A-profile only short-vector Len and Stride fields,
plus the Neon QC bit. Rearrange the order of the function so
that those fields are handled earlier and only under a suitable
guard; this allows us to drop the M-profile specific masking,
making FZ16 writeable.

This change also makes the QC bit correctly RAZ/WI for older
no-Neon A-profile cores.

This refactoring also paves the way for the low-overhead-branch
LTPSIZE field, which uses some of the bits that are used for
A-profile Stride and Len.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201019151301.2046-10-peter.maydell@linaro.org
---
 target/arm/vfp_helper.c | 47 ++++++++++++++++++++++++-----------------
 1 file changed, 28 insertions(+), 19 deletions(-)

diff --git a/target/arm/vfp_helper.c b/target/arm/vfp_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/vfp_helper.c
+++ b/target/arm/vfp_helper.c
@@ -XXX,XX +XXX,XX @@ void HELPER(vfp_set_fpscr)(CPUARMState *env, uint32_t val)
         val &= ~FPCR_FZ16;
     }
 
-    if (arm_feature(env, ARM_FEATURE_M)) {
+    vfp_set_fpscr_to_host(env, val);
+
+    if (!arm_feature(env, ARM_FEATURE_M)) {
         /*
-         * M profile FPSCR is RES0 for the QC, STRIDE, FZ16, LEN bits
-         * and also for the trapped-exception-handling bits IxE.
+         * Short-vector length and stride; on M-profile these bits
+         * are used for different purposes.
+         * We can't make this conditional be "if MVFR0.FPShVec != 0",
+         * because in v7A no-short-vector-support cores still had to
+         * allow Stride/Len to be written with the only effect that
+         * some insns are required to UNDEF if the guest sets them.
+         *
+         * TODO: if M-profile MVE implemented, set LTPSIZE.
          */
-        val &= 0xf7c0009f;
+        env->vfp.vec_len = extract32(val, 16, 3);
+        env->vfp.vec_stride = extract32(val, 20, 2);
     }
 
-    vfp_set_fpscr_to_host(env, val);
+    if (arm_feature(env, ARM_FEATURE_NEON)) {
+        /*
+         * The bit we set within fpscr_q is arbitrary; the register as a
+         * whole being zero/non-zero is what counts.
+         * TODO: M-profile MVE also has a QC bit.
+         */
+        env->vfp.qc[0] = val & FPCR_QC;
+        env->vfp.qc[1] = 0;
+        env->vfp.qc[2] = 0;
+        env->vfp.qc[3] = 0;
+    }
 
     /*
      * We don't implement trapped exception handling, so the
      * trap enable bits, IDE|IXE|UFE|OFE|DZE|IOE are all RAZ/WI (not RES0!)
      *
-     * If we exclude the exception flags, IOC|DZC|OFC|UFC|IXC|IDC
-     * (which are stored in fp_status), and the other RES0 bits
-     * in between, then we clear all of the low 16 bits.
+     * The exception flags IOC|DZC|OFC|UFC|IXC|IDC are stored in
+     * fp_status; QC, Len and Stride are stored separately earlier.
+     * Clear out all of those and the RES0 bits: only NZCV, AHP, DN,
+     * FZ, RMode and FZ16 are kept in vfp.xregs[FPSCR].
      */
     env->vfp.xregs[ARM_VFP_FPSCR] = val & 0xf7c80000;
-    env->vfp.vec_len = (val >> 16) & 7;
-    env->vfp.vec_stride = (val >> 20) & 3;
-
-    /*
-     * The bit we set within fpscr_q is arbitrary; the register as a
-     * whole being zero/non-zero is what counts.
-     */
-    env->vfp.qc[0] = val & FPCR_QC;
-    env->vfp.qc[1] = 0;
-    env->vfp.qc[2] = 0;
-    env->vfp.qc[3] = 0;
 }
 
 void vfp_set_fpscr(CPUARMState *env, uint32_t val)
-- 
2.20.1

If the M-profile low-overhead-branch extension is implemented, FPSCR
bits [18:16] are a new field LTPSIZE.  If MVE is not implemented
(currently always true for us) then this field always reads as 4 and
ignores writes.

These bits used to be the vector-length field for the old
short-vector extension, so we need to take care that they are not
misinterpreted as setting vec_len. We do this with a rearrangement
of the vfp_set_fpscr() code that deals with vec_len, vec_stride
and also the QC bit; this obviates the need for the M-profile
only masking step that we used to have at the start of the function.

We provide a new field in CPUState for LTPSIZE, even though this
will always be 4, in preparation for MVE, so we don't have to
come back later and split it out of the vfp.xregs[FPSCR] value.
(This state struct field will be saved and restored as part of
the FPSCR value via the vmstate_fpscr in machine.c.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201019151301.2046-11-peter.maydell@linaro.org
---
 target/arm/cpu.h        | 1 +
 target/arm/cpu.c        | 9 +++++++++
 target/arm/vfp_helper.c | 6 ++++++
 3 files changed, 16 insertions(+)

diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState {
         uint32_t fpdscr[M_REG_NUM_BANKS];
         uint32_t cpacr[M_REG_NUM_BANKS];
         uint32_t nsacr;
+        int ltpsize;
     } v7m;
 
     /* Information associated with an exception about to be taken:
diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(DeviceState *dev)
         uint8_t *rom;
         uint32_t vecbase;
 
+        if (cpu_isar_feature(aa32_lob, cpu)) {
+            /*
+             * LTPSIZE is constant 4 if MVE not implemented, and resets
+             * to an UNKNOWN value if MVE is implemented. We choose to
+             * always reset to 4.
+             */
+            env->v7m.ltpsize = 4;
+        }
+
         if (arm_feature(env, ARM_FEATURE_M_SECURITY)) {
             env->v7m.secure = true;
         } else {
diff --git a/target/arm/vfp_helper.c b/target/arm/vfp_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/vfp_helper.c
+++ b/target/arm/vfp_helper.c
@@ -XXX,XX +XXX,XX @@ uint32_t HELPER(vfp_get_fpscr)(CPUARMState *env)
             | (env->vfp.vec_len << 16)
             | (env->vfp.vec_stride << 20);
 
+    /*
+     * M-profile LTPSIZE overlaps A-profile Stride; whichever of the
+     * two is not applicable to this CPU will always be zero.
+     */
+    fpscr |= env->v7m.ltpsize << 16;
+
     fpscr |= vfp_get_fpscr_from_host(env);
 
     i = env->vfp.qc[0] | env->vfp.qc[1] | env->vfp.qc[2] | env->vfp.qc[3];
-- 
2.20.1

From: Richard Henderson <richard.henderson@linaro.org>

The kernel sets btype for the signal handler as if for a call.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201016184207.786698-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 linux-user/aarch64/signal.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/linux-user/aarch64/signal.c b/linux-user/aarch64/signal.c
index XXXXXXX..XXXXXXX 100644
--- a/linux-user/aarch64/signal.c
+++ b/linux-user/aarch64/signal.c
@@ -XXX,XX +XXX,XX @@ static void target_setup_frame(int usig, struct target_sigaction *ka,
             + offsetof(struct target_rt_frame_record, tramp);
     }
     env->xregs[0] = usig;
-    env->xregs[31] = frame_addr;
     env->xregs[29] = frame_addr + fr_ofs;
-    env->pc = ka->_sa_handler;
     env->xregs[30] = return_addr;
+    env->xregs[31] = frame_addr;
+    env->pc = ka->_sa_handler;
+
+    /* Invoke the signal handler as if by indirect call.  */
+    if (cpu_isar_feature(aa64_bti, env_archcpu(env))) {
+        env->btype = 2;
+    }
+
     if (info) {
         tswap_siginfo(&frame->info, info);
         env->xregs[1] = frame_addr + offsetof(struct target_rt_sigframe, info);
-- 
2.20.1

From: Richard Henderson <richard.henderson@linaro.org>

Transform the prot bit to a qemu internal page bit, and save
it in the page tables.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201016184207.786698-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/exec/cpu-all.h     |  2 ++
 linux-user/syscall_defs.h  |  4 ++++
 target/arm/cpu.h           |  5 +++++
 linux-user/mmap.c          | 16 ++++++++++++++++
 target/arm/translate-a64.c |  6 +++---
 5 files changed, 30 insertions(+), 3 deletions(-)

diff --git a/include/exec/cpu-all.h b/include/exec/cpu-all.h
index XXXXXXX..XXXXXXX 100644
--- a/include/exec/cpu-all.h
+++ b/include/exec/cpu-all.h
@@ -XXX,XX +XXX,XX @@ extern intptr_t qemu_host_page_mask;
 /* FIXME: Code that sets/uses this is broken and needs to go away.  */
 #define PAGE_RESERVED  0x0020
 #endif
+/* Target-specific bits that will be used via page_get_flags().  */
+#define PAGE_TARGET_1  0x0080
 
 #if defined(CONFIG_USER_ONLY)
 void page_dump(FILE *f);
diff --git a/linux-user/syscall_defs.h b/linux-user/syscall_defs.h
index XXXXXXX..XXXXXXX 100644
--- a/linux-user/syscall_defs.h
+++ b/linux-user/syscall_defs.h
@@ -XXX,XX +XXX,XX @@ struct target_winsize {
 #define TARGET_PROT_SEM         0x08
 #endif
 
+#ifdef TARGET_AARCH64
+#define TARGET_PROT_BTI         0x10
+#endif
+
 /* Common */
 #define TARGET_MAP_SHARED	0x01		/* Share changes */
 #define TARGET_MAP_PRIVATE	0x02		/* Changes are private */
diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -XXX,XX +XXX,XX @@ static inline MemTxAttrs *typecheck_memtxattrs(MemTxAttrs *x)
 #define arm_tlb_bti_gp(x) (typecheck_memtxattrs(x)->target_tlb_bit0)
 #define arm_tlb_mte_tagged(x) (typecheck_memtxattrs(x)->target_tlb_bit1)
 
+/*
+ * AArch64 usage of the PAGE_TARGET_* bits for linux-user.
+ */
+#define PAGE_BTI  PAGE_TARGET_1
+
 /*
  * Naming convention for isar_feature functions:
  * Functions which test 32-bit ID registers should have _aa32_ in
diff --git a/linux-user/mmap.c b/linux-user/mmap.c
index XXXXXXX..XXXXXXX 100644
--- a/linux-user/mmap.c
+++ b/linux-user/mmap.c
@@ -XXX,XX +XXX,XX @@ static int validate_prot_to_pageflags(int *host_prot, int prot)
     *host_prot = (prot & (PROT_READ | PROT_WRITE))
                | (prot & PROT_EXEC ? PROT_READ : 0);
 
+#ifdef TARGET_AARCH64
+    /*
+     * The PROT_BTI bit is only accepted if the cpu supports the feature.
+     * Since this is the unusual case, don't bother checking unless
+     * the bit has been requested.  If set and valid, record the bit
+     * within QEMU's page_flags.
+     */
+    if (prot & TARGET_PROT_BTI) {
+        ARMCPU *cpu = ARM_CPU(thread_cpu);
+        if (cpu_isar_feature(aa64_bti, cpu)) {
+            valid |= TARGET_PROT_BTI;
+            page_flags |= PAGE_BTI;
+        }
+    }
+#endif
+
     return prot & ~valid ? 0 : page_flags;
 }
 
diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/translate-a64.c
+++ b/target/arm/translate-a64.c
@@ -XXX,XX +XXX,XX @@ static void disas_data_proc_simd_fp(DisasContext *s, uint32_t insn)
  */
 static bool is_guarded_page(CPUARMState *env, DisasContext *s)
 {
-#ifdef CONFIG_USER_ONLY
-    return false;  /* FIXME */
-#else
     uint64_t addr = s->base.pc_first;
+#ifdef CONFIG_USER_ONLY
+    return page_get_flags(addr) & PAGE_BTI;
+#else
     int mmu_idx = arm_to_core_mmu_idx(s->mmu_idx);
     unsigned int index = tlb_index(env, mmu_idx, addr);
     CPUTLBEntry *entry = tlb_entry(env, mmu_idx, addr);
-- 
2.20.1

From: Richard Henderson <richard.henderson@linaro.org>

These are all of the defines required to parse
GNU_PROPERTY_AARCH64_FEATURE_1_AND, copied from binutils.
Other missing defines related to other GNU program headers
and notes are elided for now.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201016184207.786698-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/elf.h | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/include/elf.h b/include/elf.h
index XXXXXXX..XXXXXXX 100644
--- a/include/elf.h
+++ b/include/elf.h
@@ -XXX,XX +XXX,XX @@ typedef int64_t  Elf64_Sxword;
 #define PT_NOTE    4
 #define PT_SHLIB   5
 #define PT_PHDR    6
+#define PT_LOOS    0x60000000
+#define PT_HIOS    0x6fffffff
 #define PT_LOPROC  0x70000000
 #define PT_HIPROC  0x7fffffff
 
+#define PT_GNU_PROPERTY   (PT_LOOS + 0x474e553)
+
 #define PT_MIPS_REGINFO   0x70000000
 #define PT_MIPS_RTPROC    0x70000001
 #define PT_MIPS_OPTIONS   0x70000002
@@ -XXX,XX +XXX,XX @@ typedef struct elf64_shdr {
 #define NT_ARM_SYSTEM_CALL      0x404   /* ARM system call number */
 #define NT_ARM_SVE      0x405           /* ARM Scalable Vector Extension regs */
 
+/* Defined note types for GNU systems.  */
+
+#define NT_GNU_PROPERTY_TYPE_0  5       /* Program property */
+
+/* Values used in GNU .note.gnu.property notes (NT_GNU_PROPERTY_TYPE_0).  */
+
+#define GNU_PROPERTY_STACK_SIZE                 1
+#define GNU_PROPERTY_NO_COPY_ON_PROTECTED       2
+
+#define GNU_PROPERTY_LOPROC                     0xc0000000
+#define GNU_PROPERTY_HIPROC                     0xdfffffff
+#define GNU_PROPERTY_LOUSER                     0xe0000000
+#define GNU_PROPERTY_HIUSER                     0xffffffff
+
+#define GNU_PROPERTY_AARCH64_FEATURE_1_AND      0xc0000000
+#define GNU_PROPERTY_AARCH64_FEATURE_1_BTI      (1u << 0)
+#define GNU_PROPERTY_AARCH64_FEATURE_1_PAC      (1u << 1)
+
 /*
  * Physical entry point into the kernel.
  *
-- 
2.20.1

From: Philippe Mathieu-Daudé <f4bug@amsat.org>

Fix an unlikely memory leak in load_elf_image().

Fixes: bf858897b7 ("linux-user: Re-use load_elf_image for the main binary.")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201016184207.786698-5-richard.henderson@linaro.org
Message-Id: <20201003174944.1972444-1-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 linux-user/elfload.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/linux-user/elfload.c b/linux-user/elfload.c
index XXXXXXX..XXXXXXX 100644
--- a/linux-user/elfload.c
+++ b/linux-user/elfload.c
@@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd,
                 info->brk = vaddr_em;
             }
         } else if (eppnt->p_type == PT_INTERP && pinterp_name) {
-            char *interp_name;
+            g_autofree char *interp_name = NULL;
 
             if (*pinterp_name) {
                 errmsg = "Multiple PT_INTERP entries";
                 goto exit_errmsg;
             }
-            interp_name = malloc(eppnt->p_filesz);
+            interp_name = g_malloc(eppnt->p_filesz);
             if (!interp_name) {
                 goto exit_perror;
             }
@@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd,
                 errmsg = "Invalid PT_INTERP entry";
                 goto exit_errmsg;
             }
-            *pinterp_name = interp_name;
+            *pinterp_name = g_steal_pointer(&interp_name);
 #ifdef TARGET_MIPS
         } else if (eppnt->p_type == PT_MIPS_ABIFLAGS) {
             Mips_elf_abiflags_v0 abiflags;
@@ -XXX,XX +XXX,XX @@ int load_elf_binary(struct linux_binprm *bprm, struct image_info *info)
     if (elf_interpreter) {
         info->load_bias = interp_info.load_bias;
         info->entry = interp_info.entry;
-        free(elf_interpreter);
+        g_free(elf_interpreter);
     }
 
 #ifdef USE_ELF_CORE_DUMP
-- 
2.20.1

From: Richard Henderson <richard.henderson@linaro.org>

Fixing this now will clarify following patches.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201016184207.786698-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 linux-user/elfload.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/linux-user/elfload.c b/linux-user/elfload.c
index XXXXXXX..XXXXXXX 100644
--- a/linux-user/elfload.c
+++ b/linux-user/elfload.c
@@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd,
             abi_ulong vaddr, vaddr_po, vaddr_ps, vaddr_ef, vaddr_em, vaddr_len;
             int elf_prot = 0;
 
-            if (eppnt->p_flags & PF_R) elf_prot =  PROT_READ;
-            if (eppnt->p_flags & PF_W) elf_prot |= PROT_WRITE;
-            if (eppnt->p_flags & PF_X) elf_prot |= PROT_EXEC;
+            if (eppnt->p_flags & PF_R) {
+                elf_prot |= PROT_READ;
+            }
+            if (eppnt->p_flags & PF_W) {
+                elf_prot |= PROT_WRITE;
+            }
+            if (eppnt->p_flags & PF_X) {
+                elf_prot |= PROT_EXEC;
+            }
 
             vaddr = load_bias + eppnt->p_vaddr;
             vaddr_po = TARGET_ELF_PAGEOFFSET(vaddr);
-- 
2.20.1

From: Richard Henderson <richard.henderson@linaro.org>

The second loop uses a loop induction variable, and the first
does not.  Transform the first to match the second, to simplify
a following patch moving code between them.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201016184207.786698-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 linux-user/elfload.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/linux-user/elfload.c b/linux-user/elfload.c
index XXXXXXX..XXXXXXX 100644
--- a/linux-user/elfload.c
+++ b/linux-user/elfload.c
@@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd,
     loaddr = -1, hiaddr = 0;
     info->alignment = 0;
     for (i = 0; i < ehdr->e_phnum; ++i) {
-        if (phdr[i].p_type == PT_LOAD) {
-            abi_ulong a = phdr[i].p_vaddr - phdr[i].p_offset;
+        struct elf_phdr *eppnt = phdr + i;
+        if (eppnt->p_type == PT_LOAD) {
+            abi_ulong a = eppnt->p_vaddr - eppnt->p_offset;
             if (a < loaddr) {
                 loaddr = a;
             }
-            a = phdr[i].p_vaddr + phdr[i].p_memsz;
+            a = eppnt->p_vaddr + eppnt->p_memsz;
             if (a > hiaddr) {
                 hiaddr = a;
             }
             ++info->nsegs;
-            info->alignment |= phdr[i].p_align;
+            info->alignment |= eppnt->p_align;
         }
     }
 
-- 
2.20.1

From: Richard Henderson <richard.henderson@linaro.org>

For BTI, we need to know if the executable is static or dynamic,
which means looking for PT_INTERP earlier.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201016184207.786698-8-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 linux-user/elfload.c | 60 +++++++++++++++++++++++---------------------
 1 file changed, 31 insertions(+), 29 deletions(-)

diff --git a/linux-user/elfload.c b/linux-user/elfload.c
index XXXXXXX..XXXXXXX 100644
--- a/linux-user/elfload.c
+++ b/linux-user/elfload.c
@@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd,
 
     mmap_lock();
 
-    /* Find the maximum size of the image and allocate an appropriate
-       amount of memory to handle that.  */
+    /*
+     * Find the maximum size of the image and allocate an appropriate
+     * amount of memory to handle that.  Locate the interpreter, if any.
+     */
     loaddr = -1, hiaddr = 0;
     info->alignment = 0;
     for (i = 0; i < ehdr->e_phnum; ++i) {
@@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd,
             }
             ++info->nsegs;
             info->alignment |= eppnt->p_align;
+        } else if (eppnt->p_type == PT_INTERP && pinterp_name) {
+            g_autofree char *interp_name = NULL;
+
+            if (*pinterp_name) {
+                errmsg = "Multiple PT_INTERP entries";
+                goto exit_errmsg;
+            }
+            interp_name = g_malloc(eppnt->p_filesz);
+            if (!interp_name) {
+                goto exit_perror;
+            }
+
+            if (eppnt->p_offset + eppnt->p_filesz <= BPRM_BUF_SIZE) {
+                memcpy(interp_name, bprm_buf + eppnt->p_offset,
+                       eppnt->p_filesz);
+            } else {
+                retval = pread(image_fd, interp_name, eppnt->p_filesz,
+                               eppnt->p_offset);
+                if (retval != eppnt->p_filesz) {
+                    goto exit_perror;
+                }
+            }
+            if (interp_name[eppnt->p_filesz - 1] != 0) {
+                errmsg = "Invalid PT_INTERP entry";
+                goto exit_errmsg;
+            }
+            *pinterp_name = g_steal_pointer(&interp_name);
         }
     }
 
@@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd,
             if (vaddr_em > info->brk) {
                 info->brk = vaddr_em;
             }
-        } else if (eppnt->p_type == PT_INTERP && pinterp_name) {
-            g_autofree char *interp_name = NULL;
-
-            if (*pinterp_name) {
-                errmsg = "Multiple PT_INTERP entries";
-                goto exit_errmsg;
-            }
-            interp_name = g_malloc(eppnt->p_filesz);
-            if (!interp_name) {
-                goto exit_perror;
-            }
-
-            if (eppnt->p_offset + eppnt->p_filesz <= BPRM_BUF_SIZE) {
-                memcpy(interp_name, bprm_buf + eppnt->p_offset,
-                       eppnt->p_filesz);
-            } else {
-                retval = pread(image_fd, interp_name, eppnt->p_filesz,
-                               eppnt->p_offset);
-                if (retval != eppnt->p_filesz) {
-                    goto exit_perror;
-                }
-            }
-            if (interp_name[eppnt->p_filesz - 1] != 0) {
-                errmsg = "Invalid PT_INTERP entry";
-                goto exit_errmsg;
-            }
-            *pinterp_name = g_steal_pointer(&interp_name);
 #ifdef TARGET_MIPS
         } else if (eppnt->p_type == PT_MIPS_ABIFLAGS) {
             Mips_elf_abiflags_v0 abiflags;
-- 
2.20.1

From: Richard Henderson <richard.henderson@linaro.org>

This is a bit clearer than open-coding some of this
with a bare c string.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201016184207.786698-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 linux-user/elfload.c | 37 ++++++++++++++++++++-----------------
 1 file changed, 20 insertions(+), 17 deletions(-)

diff --git a/linux-user/elfload.c b/linux-user/elfload.c
index XXXXXXX..XXXXXXX 100644
--- a/linux-user/elfload.c
+++ b/linux-user/elfload.c
@@ -XXX,XX +XXX,XX @@
 #include "qemu/guest-random.h"
 #include "qemu/units.h"
 #include "qemu/selfmap.h"
+#include "qapi/error.h"
 
 #ifdef _ARCH_PPC64
 #undef ARCH_DLINFO
@@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd,
     struct elf_phdr *phdr;
     abi_ulong load_addr, load_bias, loaddr, hiaddr, error;
     int i, retval;
-    const char *errmsg;
+    Error *err = NULL;
 
     /* First of all, some simple consistency checks */
-    errmsg = "Invalid ELF image for this architecture";
     if (!elf_check_ident(ehdr)) {
+        error_setg(&err, "Invalid ELF image for this architecture");
         goto exit_errmsg;
     }
     bswap_ehdr(ehdr);
     if (!elf_check_ehdr(ehdr)) {
+        error_setg(&err, "Invalid ELF image for this architecture");
         goto exit_errmsg;
     }
 
@@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd,
             g_autofree char *interp_name = NULL;
 
             if (*pinterp_name) {
-                errmsg = "Multiple PT_INTERP entries";
+                error_setg(&err, "Multiple PT_INTERP entries");
                 goto exit_errmsg;
             }
+
             interp_name = g_malloc(eppnt->p_filesz);
-            if (!interp_name) {
-                goto exit_perror;
-            }
 
             if (eppnt->p_offset + eppnt->p_filesz <= BPRM_BUF_SIZE) {
                 memcpy(interp_name, bprm_buf + eppnt->p_offset,
@@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd,
                 retval = pread(image_fd, interp_name, eppnt->p_filesz,
                                eppnt->p_offset);
                 if (retval != eppnt->p_filesz) {
-                    goto exit_perror;
+                    goto exit_read;
                 }
             }
             if (interp_name[eppnt->p_filesz - 1] != 0) {
-                errmsg = "Invalid PT_INTERP entry";
+                error_setg(&err, "Invalid PT_INTERP entry");
                 goto exit_errmsg;
             }
             *pinterp_name = g_steal_pointer(&interp_name);
@@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd,
                             (ehdr->e_type == ET_EXEC ? MAP_FIXED : 0),
                             -1, 0);
     if (load_addr == -1) {
-        goto exit_perror;
+        goto exit_mmap;
     }
     load_bias = load_addr - loaddr;
 
@@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd,
                                     image_fd, eppnt->p_offset - vaddr_po);
 
                 if (error == -1) {
-                    goto exit_perror;
+                    goto exit_mmap;
                 }
             }
 
@@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd,
         } else if (eppnt->p_type == PT_MIPS_ABIFLAGS) {
             Mips_elf_abiflags_v0 abiflags;
             if (eppnt->p_filesz < sizeof(Mips_elf_abiflags_v0)) {
-                errmsg = "Invalid PT_MIPS_ABIFLAGS entry";
+                error_setg(&err, "Invalid PT_MIPS_ABIFLAGS entry");
                 goto exit_errmsg;
             }
             if (eppnt->p_offset + eppnt->p_filesz <= BPRM_BUF_SIZE) {
@@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd,
                 retval = pread(image_fd, &abiflags, sizeof(Mips_elf_abiflags_v0),
                                eppnt->p_offset);
                 if (retval != sizeof(Mips_elf_abiflags_v0)) {
-                    goto exit_perror;
+                    goto exit_read;
                 }
             }
             bswap_mips_abiflags(&abiflags);
@@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd,
 
  exit_read:
     if (retval >= 0) {
-        errmsg = "Incomplete read of file header";
-        goto exit_errmsg;
+        error_setg(&err, "Incomplete read of file header");
+    } else {
+        error_setg_errno(&err, errno, "Error reading file header");
     }
- exit_perror:
-    errmsg = strerror(errno);
+    goto exit_errmsg;
+ exit_mmap:
+    error_setg_errno(&err, errno, "Error mapping file");
+    goto exit_errmsg;
  exit_errmsg:
-    fprintf(stderr, "%s: %s\n", image_name, errmsg);
+    error_reportf_err(err, "%s: ", image_name);
     exit(-1);
 }
 
-- 
2.20.1

From: Richard Henderson <richard.henderson@linaro.org>

This is slightly clearer than just using strerror, though
the different forms produced by error_setg_file_open and
error_setg_errno isn't entirely convenient.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201016184207.786698-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 linux-user/elfload.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/linux-user/elfload.c b/linux-user/elfload.c
index XXXXXXX..XXXXXXX 100644
--- a/linux-user/elfload.c
+++ b/linux-user/elfload.c
@@ -XXX,XX +XXX,XX @@ static void load_elf_interp(const char *filename, struct image_info *info,
                             char bprm_buf[BPRM_BUF_SIZE])
 {
     int fd, retval;
+    Error *err = NULL;
 
     fd = open(path(filename), O_RDONLY);
     if (fd < 0) {
-        goto exit_perror;
+        error_setg_file_open(&err, errno, filename);
+        error_report_err(err);
+        exit(-1);
     }
 
     retval = read(fd, bprm_buf, BPRM_BUF_SIZE);
     if (retval < 0) {
-        goto exit_perror;
+        error_setg_errno(&err, errno, "Error reading file header");
+        error_reportf_err(err, "%s: ", filename);
+        exit(-1);
     }
+
     if (retval < BPRM_BUF_SIZE) {
         memset(bprm_buf + retval, 0, BPRM_BUF_SIZE - retval);
     }
 
     load_elf_image(filename, fd, info, NULL, bprm_buf);
-    return;
-
- exit_perror:
-    fprintf(stderr, "%s: %s\n", filename, strerror(errno));
-    exit(-1);
 }
 
 static int symfind(const void *s0, const void *s1)
-- 
2.20.1

From: Richard Henderson <richard.henderson@linaro.org>

This is generic support, with the code disabled for all targets.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201016184207.786698-11-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 linux-user/qemu.h    |   4 ++
 linux-user/elfload.c | 157 +++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 161 insertions(+)

diff --git a/linux-user/qemu.h b/linux-user/qemu.h
index XXXXXXX..XXXXXXX 100644
--- a/linux-user/qemu.h
+++ b/linux-user/qemu.h
@@ -XXX,XX +XXX,XX @@ struct image_info {
         abi_ulong       interpreter_loadmap_addr;
         abi_ulong       interpreter_pt_dynamic_addr;
         struct image_info *other_info;
+
+        /* For target-specific processing of NT_GNU_PROPERTY_TYPE_0. */
+        uint32_t        note_flags;
+
 #ifdef TARGET_MIPS
         int             fp_abi;
         int             interp_fp_abi;
diff --git a/linux-user/elfload.c b/linux-user/elfload.c
index XXXXXXX..XXXXXXX 100644
--- a/linux-user/elfload.c
+++ b/linux-user/elfload.c
@@ -XXX,XX +XXX,XX @@ static void elf_core_copy_regs(target_elf_gregset_t *regs,
 
 #include "elf.h"
 
+static bool arch_parse_elf_property(uint32_t pr_type, uint32_t pr_datasz,
+                                    const uint32_t *data,
+                                    struct image_info *info,
+                                    Error **errp)
+{
+    g_assert_not_reached();
+}
+#define ARCH_USE_GNU_PROPERTY 0
+
 struct exec
 {
     unsigned int a_info;   /* Use macros N_MAGIC, etc for access */
@@ -XXX,XX +XXX,XX @@ void probe_guest_base(const char *image_name, abi_ulong guest_loaddr,
                   "@ 0x%" PRIx64 "\n", (uint64_t)guest_base);
 }
 
+enum {
+    /* The string "GNU\0" as a magic number. */
+    GNU0_MAGIC = const_le32('G' | 'N' << 8 | 'U' << 16),
+    NOTE_DATA_SZ = 1 * KiB,
+    NOTE_NAME_SZ = 4,
+    ELF_GNU_PROPERTY_ALIGN = ELF_CLASS == ELFCLASS32 ? 4 : 8,
+};
+
+/*
+ * Process a single gnu_property entry.
+ * Return false for error.
+ */
+static bool parse_elf_property(const uint32_t *data, int *off, int datasz,
+                               struct image_info *info, bool have_prev_type,
+                               uint32_t *prev_type, Error **errp)
+{
+    uint32_t pr_type, pr_datasz, step;
+
+    if (*off > datasz || !QEMU_IS_ALIGNED(*off, ELF_GNU_PROPERTY_ALIGN)) {
+        goto error_data;
+    }
+    datasz -= *off;
+    data += *off / sizeof(uint32_t);
+
+    if (datasz < 2 * sizeof(uint32_t)) {
+        goto error_data;
+    }
+    pr_type = data[0];
+    pr_datasz = data[1];
+    data += 2;
+    datasz -= 2 * sizeof(uint32_t);
+    step = ROUND_UP(pr_datasz, ELF_GNU_PROPERTY_ALIGN);
+    if (step > datasz) {
+        goto error_data;
+    }
+
+    /* Properties are supposed to be unique and sorted on pr_type. */
+    if (have_prev_type && pr_type <= *prev_type) {
+        if (pr_type == *prev_type) {
+            error_setg(errp, "Duplicate property in PT_GNU_PROPERTY");
+        } else {
+            error_setg(errp, "Unsorted property in PT_GNU_PROPERTY");
+        }
+        return false;
+    }
+    *prev_type = pr_type;
+
+    if (!arch_parse_elf_property(pr_type, pr_datasz, data, info, errp)) {
+        return false;
+    }
+
+    *off += 2 * sizeof(uint32_t) + step;
+    return true;
+
+ error_data:
+    error_setg(errp, "Ill-formed property in PT_GNU_PROPERTY");
+    return false;
+}
+
+/* Process NT_GNU_PROPERTY_TYPE_0. */
+static bool parse_elf_properties(int image_fd,
+                                 struct image_info *info,
+                                 const struct elf_phdr *phdr,
+                                 char bprm_buf[BPRM_BUF_SIZE],
+                                 Error **errp)
+{
+    union {
+        struct elf_note nhdr;
+        uint32_t data[NOTE_DATA_SZ / sizeof(uint32_t)];
+    } note;
+
+    int n, off, datasz;
+    bool have_prev_type;
+    uint32_t prev_type;
+
+    /* Unless the arch requires properties, ignore them. */
+    if (!ARCH_USE_GNU_PROPERTY) {
+        return true;
+    }
+
+    /* If the properties are crazy large, that's too bad. */
+    n = phdr->p_filesz;
+    if (n > sizeof(note)) {
+        error_setg(errp, "PT_GNU_PROPERTY too large");
+        return false;
+    }
+    if (n < sizeof(note.nhdr)) {
+        error_setg(errp, "PT_GNU_PROPERTY too small");
+        return false;
+    }
+
+    if (phdr->p_offset + n <= BPRM_BUF_SIZE) {
+        memcpy(&note, bprm_buf + phdr->p_offset, n);
+    } else {
+        ssize_t len = pread(image_fd, &note, n, phdr->p_offset);
+        if (len != n) {
+            error_setg_errno(errp, errno, "Error reading file header");
+            return false;
+        }
+    }
+
+    /*
+     * The contents of a valid PT_GNU_PROPERTY is a sequence
+     * of uint32_t -- swap them all now.
+     */
+#ifdef BSWAP_NEEDED
+    for (int i = 0; i < n / 4; i++) {
+        bswap32s(note.data + i);
+    }
+#endif
+
+    /*
+     * Note that nhdr is 3 words, and that the "name" described by namesz
+     * immediately follows nhdr and is thus at the 4th word.  Further, all
+     * of the inputs to the kernel's round_up are multiples of 4.
+     */
+    if (note.nhdr.n_type != NT_GNU_PROPERTY_TYPE_0 ||
+        note.nhdr.n_namesz != NOTE_NAME_SZ ||
+        note.data[3] != GNU0_MAGIC) {
+        error_setg(errp, "Invalid note in PT_GNU_PROPERTY");
+        return false;
+    }
+    off = sizeof(note.nhdr) + NOTE_NAME_SZ;
+
+    datasz = note.nhdr.n_descsz + off;
+    if (datasz > n) {
+        error_setg(errp, "Invalid note size in PT_GNU_PROPERTY");
+        return false;
+    }
+
+    have_prev_type = false;
+    prev_type = 0;
+    while (1) {
+        if (off == datasz) {
+            return true;  /* end, exit ok */
+        }
+        if (!parse_elf_property(note.data, &off, datasz, info,
+                                have_prev_type, &prev_type, errp)) {
+            return false;
+        }
+        have_prev_type = true;
+    }
+}
+
 /* Load an ELF image into the address space.
 
    IMAGE_NAME is the filename of the image, to use in error messages.
@@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd,
                 goto exit_errmsg;
             }
             *pinterp_name = g_steal_pointer(&interp_name);
+        } else if (eppnt->p_type == PT_GNU_PROPERTY) {
+            if (!parse_elf_properties(image_fd, info, eppnt, bprm_buf, &err)) {
+                goto exit_errmsg;
+            }
         }
     }
 
-- 
2.20.1

From: Richard Henderson <richard.henderson@linaro.org>

Use the new generic support for NT_GNU_PROPERTY_TYPE_0.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201016184207.786698-12-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 linux-user/elfload.c | 48 ++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 46 insertions(+), 2 deletions(-)

diff --git a/linux-user/elfload.c b/linux-user/elfload.c
index XXXXXXX..XXXXXXX 100644
--- a/linux-user/elfload.c
+++ b/linux-user/elfload.c
@@ -XXX,XX +XXX,XX @@ static void elf_core_copy_regs(target_elf_gregset_t *regs,
 
 #include "elf.h"
 
+/* We must delay the following stanzas until after "elf.h". */
+#if defined(TARGET_AARCH64)
+
+static bool arch_parse_elf_property(uint32_t pr_type, uint32_t pr_datasz,
+                                    const uint32_t *data,
+                                    struct image_info *info,
+                                    Error **errp)
+{
+    if (pr_type == GNU_PROPERTY_AARCH64_FEATURE_1_AND) {
+        if (pr_datasz != sizeof(uint32_t)) {
+            error_setg(errp, "Ill-formed GNU_PROPERTY_AARCH64_FEATURE_1_AND");
+            return false;
+        }
+        /* We will extract GNU_PROPERTY_AARCH64_FEATURE_1_BTI later. */
+        info->note_flags = *data;
+    }
+    return true;
+}
+#define ARCH_USE_GNU_PROPERTY 1
+
+#else
+
 static bool arch_parse_elf_property(uint32_t pr_type, uint32_t pr_datasz,
                                     const uint32_t *data,
                                     struct image_info *info,
@@ -XXX,XX +XXX,XX @@ static bool arch_parse_elf_property(uint32_t pr_type, uint32_t pr_datasz,
 }
 #define ARCH_USE_GNU_PROPERTY 0
 
+#endif
+
 struct exec
 {
     unsigned int a_info;   /* Use macros N_MAGIC, etc for access */
@@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd,
     struct elfhdr *ehdr = (struct elfhdr *)bprm_buf;
     struct elf_phdr *phdr;
     abi_ulong load_addr, load_bias, loaddr, hiaddr, error;
-    int i, retval;
+    int i, retval, prot_exec;
     Error *err = NULL;
 
     /* First of all, some simple consistency checks */
@@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd,
     info->brk = 0;
     info->elf_flags = ehdr->e_flags;
 
+    prot_exec = PROT_EXEC;
+#ifdef TARGET_AARCH64
+    /*
+     * If the BTI feature is present, this indicates that the executable
+     * pages of the startup binary should be mapped with PROT_BTI, so that
+     * branch targets are enforced.
+     *
+     * The startup binary is either the interpreter or the static executable.
+     * The interpreter is responsible for all pages of a dynamic executable.
+     *
+     * Elf notes are backward compatible to older cpus.
+     * Do not enable BTI unless it is supported.
+     */
+    if ((info->note_flags & GNU_PROPERTY_AARCH64_FEATURE_1_BTI)
+        && (pinterp_name == NULL || *pinterp_name == 0)
+        && cpu_isar_feature(aa64_bti, ARM_CPU(thread_cpu))) {
+        prot_exec |= TARGET_PROT_BTI;
+    }
+#endif
+
     for (i = 0; i < ehdr->e_phnum; i++) {
         struct elf_phdr *eppnt = phdr + i;
         if (eppnt->p_type == PT_LOAD) {
@@ -XXX,XX +XXX,XX @@ static void load_elf_image(const char *image_name, int image_fd,
                 elf_prot |= PROT_WRITE;
             }
             if (eppnt->p_flags & PF_X) {
-                elf_prot |= PROT_EXEC;
+                elf_prot |= prot_exec;
             }
 
             vaddr = load_bias + eppnt->p_vaddr;
-- 
2.20.1

From: Richard Henderson <richard.henderson@linaro.org>

The note test requires gcc 10 for -mbranch-protection=standard.
The mmap test uses PROT_BTI and does not require special compiler support.

Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201016184207.786698-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 tests/tcg/aarch64/bti-1.c         |  62 +++++++++++++++++
 tests/tcg/aarch64/bti-2.c         | 108 ++++++++++++++++++++++++++++++
 tests/tcg/aarch64/bti-crt.inc.c   |  51 ++++++++++++++
 tests/tcg/aarch64/Makefile.target |  10 +++
 tests/tcg/configure.sh            |   4 ++
 5 files changed, 235 insertions(+)
 create mode 100644 tests/tcg/aarch64/bti-1.c
 create mode 100644 tests/tcg/aarch64/bti-2.c
 create mode 100644 tests/tcg/aarch64/bti-crt.inc.c

diff --git a/tests/tcg/aarch64/bti-1.c b/tests/tcg/aarch64/bti-1.c
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/tests/tcg/aarch64/bti-1.c
@@ -XXX,XX +XXX,XX @@
+/*
+ * Branch target identification, basic notskip cases.
+ */
+
+#include "bti-crt.inc.c"
+
+static void skip2_sigill(int sig, siginfo_t *info, ucontext_t *uc)
+{
+    uc->uc_mcontext.pc += 8;
+    uc->uc_mcontext.pstate = 1;
+}
+
+#define NOP       "nop"
+#define BTI_N     "hint #32"
+#define BTI_C     "hint #34"
+#define BTI_J     "hint #36"
+#define BTI_JC    "hint #38"
+
+#define BTYPE_1(DEST) \
+    asm("mov %0,#1; adr x16, 1f; br x16; 1: " DEST "; mov %0,#0" \
+        : "=r"(skipped) : : "x16")
+
+#define BTYPE_2(DEST) \
+    asm("mov %0,#1; adr x16, 1f; blr x16; 1: " DEST "; mov %0,#0" \
+        : "=r"(skipped) : : "x16", "x30")
+
+#define BTYPE_3(DEST) \
+    asm("mov %0,#1; adr x15, 1f; br x15; 1: " DEST "; mov %0,#0" \
+        : "=r"(skipped) : : "x15")
+
+#define TEST(WHICH, DEST, EXPECT) \
+    do { WHICH(DEST); fail += skipped ^ EXPECT; } while (0)
+
+
+int main()
+{
+    int fail = 0;
+    int skipped;
+
+    /* Signal-like with SA_SIGINFO.  */
+    signal_info(SIGILL, skip2_sigill);
+
+    TEST(BTYPE_1, NOP, 1);
+    TEST(BTYPE_1, BTI_N, 1);
+    TEST(BTYPE_1, BTI_C, 0);
+    TEST(BTYPE_1, BTI_J, 0);
+    TEST(BTYPE_1, BTI_JC, 0);
+
+    TEST(BTYPE_2, NOP, 1);
+    TEST(BTYPE_2, BTI_N, 1);
+    TEST(BTYPE_2, BTI_C, 0);
+    TEST(BTYPE_2, BTI_J, 1);
+    TEST(BTYPE_2, BTI_JC, 0);
+
+    TEST(BTYPE_3, NOP, 1);
+    TEST(BTYPE_3, BTI_N, 1);
+    TEST(BTYPE_3, BTI_C, 1);
+    TEST(BTYPE_3, BTI_J, 0);
+    TEST(BTYPE_3, BTI_JC, 0);
+
+    return fail;
+}
diff --git a/tests/tcg/aarch64/bti-2.c b/tests/tcg/aarch64/bti-2.c
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/tests/tcg/aarch64/bti-2.c
@@ -XXX,XX +XXX,XX @@
+/*
+ * Branch target identification, basic notskip cases.
+ */
+
+#include <stdio.h>
+#include <signal.h>
+#include <string.h>
+#include <unistd.h>
+#include <sys/mman.h>
+
+#ifndef PROT_BTI
+#define PROT_BTI  0x10
+#endif
+
+static void skip2_sigill(int sig, siginfo_t *info, void *vuc)
+{
+    ucontext_t *uc = vuc;
+    uc->uc_mcontext.pc += 8;
+    uc->uc_mcontext.pstate = 1;
+}
+
+#define NOP       "nop"
+#define BTI_N     "hint #32"
+#define BTI_C     "hint #34"
+#define BTI_J     "hint #36"
+#define BTI_JC    "hint #38"
+
+#define BTYPE_1(DEST)    \
+    "mov x1, #1\n\t"     \
+    "adr x16, 1f\n\t"    \
+    "br x16\n"           \
+"1: " DEST "\n\t"        \
+    "mov x1, #0"
+
+#define BTYPE_2(DEST)    \
+    "mov x1, #1\n\t"     \
+    "adr x16, 1f\n\t"    \
+    "blr x16\n"          \
+"1: " DEST "\n\t"        \
+    "mov x1, #0"
+
+#define BTYPE_3(DEST)    \
+    "mov x1, #1\n\t"     \
+    "adr x15, 1f\n\t"    \
+    "br x15\n"           \
+"1: " DEST "\n\t"        \
+    "mov x1, #0"
+
+#define TEST(WHICH, DEST, EXPECT) \
+    WHICH(DEST) "\n"              \
+    ".if " #EXPECT "\n\t"         \
+    "eor x1, x1," #EXPECT "\n"    \
+    ".endif\n\t"                  \
+    "add x0, x0, x1\n\t"
+
+extern char test_begin[], test_end[];
+
+asm("\n"
+"test_begin:\n\t"
+    BTI_C "\n\t"
+    "mov x2, x30\n\t"
+    "mov x0, #0\n\t"
+
+    TEST(BTYPE_1, NOP, 1)
+    TEST(BTYPE_1, BTI_N, 1)
+    TEST(BTYPE_1, BTI_C, 0)
+    TEST(BTYPE_1, BTI_J, 0)
+    TEST(BTYPE_1, BTI_JC, 0)
+
+    TEST(BTYPE_2, NOP, 1)
+    TEST(BTYPE_2, BTI_N, 1)
+    TEST(BTYPE_2, BTI_C, 0)
+    TEST(BTYPE_2, BTI_J, 1)
+    TEST(BTYPE_2, BTI_JC, 0)
+
+    TEST(BTYPE_3, NOP, 1)
+    TEST(BTYPE_3, BTI_N, 1)
+    TEST(BTYPE_3, BTI_C, 1)
+    TEST(BTYPE_3, BTI_J, 0)
+    TEST(BTYPE_3, BTI_JC, 0)
+
+    "ret x2\n"
+"test_end:"
+);
+
+int main()
+{
+    struct sigaction sa;
+
+    void *p = mmap(0, getpagesize(),
+                   PROT_EXEC | PROT_READ | PROT_WRITE | PROT_BTI,
+                   MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
+    if (p == MAP_FAILED) {
+        perror("mmap");
+        return 1;
+    }
+
+    memset(&sa, 0, sizeof(sa));
+    sa.sa_sigaction = skip2_sigill;
+    sa.sa_flags = SA_SIGINFO;
+    if (sigaction(SIGILL, &sa, NULL) < 0) {
+        perror("sigaction");
+        return 1;
+    }
+
+    memcpy(p, test_begin, test_end - test_begin);
+    return ((int (*)(void))p)();
+}
diff --git a/tests/tcg/aarch64/bti-crt.inc.c b/tests/tcg/aarch64/bti-crt.inc.c
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/tests/tcg/aarch64/bti-crt.inc.c
@@ -XXX,XX +XXX,XX @@
+/*
+ * Minimal user-environment for testing BTI.
+ *
+ * Normal libc is not (yet) built with BTI support enabled,
+ * and so could generate a BTI TRAP before ever reaching main.
+ */
+
+#include <stdlib.h>
+#include <signal.h>
+#include <ucontext.h>
+#include <asm/unistd.h>
+
+int main(void);
+
+void _start(void)
+{
+    exit(main());
+}
+
+void exit(int ret)
+{
+    register int x0 __asm__("x0") = ret;
+    register int x8 __asm__("x8") = __NR_exit;
+
+    asm volatile("svc #0" : : "r"(x0), "r"(x8));
+    __builtin_unreachable();
+}
+
+/*
+ * Irritatingly, the user API struct sigaction does not match the
+ * kernel API struct sigaction.  So for simplicity, isolate the
+ * kernel ABI here, and make this act like signal.
+ */
+void signal_info(int sig, void (*fn)(int, siginfo_t *, ucontext_t *))
+{
+    struct kernel_sigaction {
+        void (*handler)(int, siginfo_t *, ucontext_t *);
+        unsigned long flags;
+        unsigned long restorer;
+        unsigned long mask;
+    } sa = { fn, SA_SIGINFO, 0, 0 };
+
+    register int x0 __asm__("x0") = sig;
+    register void *x1 __asm__("x1") = &sa;
+    register void *x2 __asm__("x2") = 0;
+    register int x3 __asm__("x3") = sizeof(unsigned long);
+    register int x8 __asm__("x8") = __NR_rt_sigaction;
+
+    asm volatile("svc #0"
+                 : : "r"(x0), "r"(x1), "r"(x2), "r"(x3), "r"(x8) : "memory");
+}
diff --git a/tests/tcg/aarch64/Makefile.target b/tests/tcg/aarch64/Makefile.target
index XXXXXXX..XXXXXXX 100644
--- a/tests/tcg/aarch64/Makefile.target
+++ b/tests/tcg/aarch64/Makefile.target
@@ -XXX,XX +XXX,XX @@ run-pauth-%: QEMU_OPTS += -cpu max
 run-plugin-pauth-%: QEMU_OPTS += -cpu max
 endif
 
+# BTI Tests
+# bti-1 tests the elf notes, so we require special compiler support.
+ifneq ($(DOCKER_IMAGE)$(CROSS_CC_HAS_ARMV8_BTI),)
+AARCH64_TESTS += bti-1
+bti-1: CFLAGS += -mbranch-protection=standard
+bti-1: LDFLAGS += -nostdlib
+endif
+# bti-2 tests PROT_BTI, so no special compiler support required.
+AARCH64_TESTS += bti-2
+
 # Semihosting smoke test for linux-user
 AARCH64_TESTS += semihosting
 run-semihosting: semihosting
diff --git a/tests/tcg/configure.sh b/tests/tcg/configure.sh
index XXXXXXX..XXXXXXX 100755
--- a/tests/tcg/configure.sh
+++ b/tests/tcg/configure.sh
@@ -XXX,XX +XXX,XX @@ for target in $target_list; do
                -march=armv8.3-a -o $TMPE $TMPC; then
                 echo "CROSS_CC_HAS_ARMV8_3=y" >> $config_target_mak
             fi
+            if do_compiler "$target_compiler" $target_compiler_cflags \
+               -mbranch-protection=standard -o $TMPE $TMPC; then
+                echo "CROSS_CC_HAS_ARMV8_BTI=y" >> $config_target_mak
+            fi
         ;;
     esac
 
-- 
2.20.1

Hi; here's another arm pullreq; main parts here are the
new i.MX 8MM EVK board, and a lot of refactoring.

thanks
-- PMM

The following changes since commit aa15257174da180c6a8a9d58f87319cfe61c5520:

Merge tag 'pbouvier/pr/plugins-20260424' of https://gitlab.com/p-b-o/qemu into staging (2026-04-25 10:22:04 -0400)

are available in the Git repository at:

https://gitlab.com/pm215/qemu.git tags/pull-target-arm-20260427

for you to fetch changes up to 4575da5ecb7a27544aa6da1f78e700e8100ceaea:

target/arm: report register in WFIT syndromes (2026-04-27 11:46:34 +0100)

----------------------------------------------------------------
target-arm queue:
docs/system: add FEAT_AA32 and FEAT_AA64 to emulation list
hw/arm: Add the i.MX 8MM EVK(Evaluation Kit) board
target/arm: Build M-profile helper code once only
hw/arm: Remove hw_error() for the unimplemented CM_LMBUSCNT register
hw: Move ARM_SYSCTL_GPIO definitions to arm sysctl specific header
target/arm: Allow 'aarch64=off' to be set for TCG CPUs
target/arm: Allow some sysregs to not have to be an exact match for migration
hw/arm/raspi4b: NOP all DTB nodes when removing unimplemented devices
hw/arm/fsl-imx6ul: Implement LCDIF display device
target/arm: Refactor syndrome value code to use registerfields
target/arm: Report the register in WFxT syndromes

----------------------------------------------------------------
Alex Bennée (24):
      docs/system: add FEAT_AA32 and FEAT_AA64 to emulation list
      target/arm: migrate basic syndrome helpers to registerfields
      target/arm: migrate system/cp trap syndromes to registerfields
      target/arm: migrate FP/SIMD trap syndromes to registerfields
      target/arm: migrate eret trap syndromes to registerfields
      target/arm: migrate SME trap syndromes to registerfields
      target/arm: migrate PAC trap syndromes to registerfields
      target/arm: migrate BTI trap syndromes to registerfields
      target/arm: migrate BXJ trap syndromes to registerfields
      target/arm: migrate Granule Protection traps to registerfields
      target/arm: migrate fault syndromes to registerfields
      target/arm: migrate debug syndromes to registerfields
      target/arm: migrate wfx syndromes to registerfields
      target/arm: migrate gcs syndromes to registerfields
      target/arm: migrate memory op syndromes to registerfields
      target/arm: migrate check_hcr_el2_trap to use syndrome helper
      target/arm: use syndrome helpers in arm_cpu_do_interrupt_aarch32_hyp
      target/arm: use syndrome helpers to set SAME_EL EC bit
      target/arm: make whpx use syndrome helpers for decode
      target/arm: make hvf use syndrome helpers for decode
      target/arm: use syndrome helpers in merge_syn_data_abort
      target/arm: use syndrome helpers to query VNCR bit
      target/arm: remove old syndrome defines
      target/arm: report register in WFIT syndromes

Eric Auger (7):
      target/arm/cpu: Introduce the infrastructure for cpreg migration tolerances
      target/arm/machine: Handle ToleranceNotOnBothEnds migration tolerances
      target/arm/machine: Handle ToleranceOnlySrcTestValue migration tolerance
      target/arm/cpu64: Mitigate migration failures due to spurious TCR_EL1, PIRE0_EL1 and PIR_EL1
      target/arm/cpu64: Define cpreg migration tolerance for KVM_REG_ARM_VENDOR_HYP_BMAP_2
      target/arm/helper: Define cpreg migration tolerance for DGBDTR_EL0
      Revert "target/arm: Reinstate bogus AArch32 DBGDTRTX register for migration compat"

Gaurav Sharma (15):
      hw/arm: Add the i.MX 8MM EVK(Evaluation Kit) board
      hw/misc/imx8mp_analog: Add property to analog device
      hw/arm/fsl-imx8mm: Add Analog device IP to iMX8MM SOC
      hw/arm/fsl-imx8mm: Add Clock Control Module IP to iMX8MM
      hw/arm/fsl-imx8mm: Implemented support for SNVS
      hw/arm/fsl-imx8mm: Adding support for USDHC storage controllers
      hw/arm/fsl-imx8mm: Add PCIe support
      hw/arm/fsl-imx8mm: Add GPIO controllers
      hw/arm/fsl-imx8mm: Adding support for I2C emulation
      hw/arm/fsl-imx8mm: Adding support for SPI controller
      hw/arm/fsl-imx8mm: Adding support for Watchdog Timers
      hw/arm/fsl-imx8mm: Adding support for General Purpose Timers
      hw/arm/fsl-imx8mm: Adding support for ENET ethernet controller
      hw/arm/fsl-imx8mm: Adding support for USB controller
      hw/arm/fsl-imx8mm: Adding functional testing of iMX8MM emulation

Osama Abdelkader (1):
      hw/arm/raspi4b: NOP all DTB nodes when removing unimplemented devices

Peter Maydell (4):
      hw: Move ARM_SYSCTL_GPIO definitions to arm sysctl specific header
      target/arm: Clear AArch64 ID regs from ARMISARegisters if AArch64 disabled
      target/arm: Allow 'aarch64=off' to be set for TCG CPUs
      tests/functional/aarch64: Add basic test of TCG aarch64=off

Philippe Mathieu-Daudé (9):
      target/arm: Ignore endianness when setting MTE tags
      target/arm: Explode MO_TExx -> MO_TE | MO_xx
      target/arm: Hoist MO_TE into mve_advance_vpt()
      target/arm: Hoist MO_TE into MVE DO_VSTR() macro
      target/arm: Introduce mo_endian() helper
      target/arm: Replace MO_TE -> mo_endian() for MVE helpers
      target/arm: Compile mve_helper.c once
      target/arm: Replace MO_TE -> mo_endian() for Cortex-M helpers
      target/arm: Compile m_helper.c once

Thomas Huth (1):
      hw/arm: Remove hw_error() for the unimplemented CM_LMBUSCNT register

Yucai Liu (2):
      hw/display: Add i.MX6UL LCDIF device model
      hw/arm/fsl-imx6ul: Wire in the LCDIF device model

MAINTAINERS                                       |  16 +-
 docs/system/arm/cpu-features.rst                  |  10 +-
 docs/system/arm/emulation.rst                     |   2 +
 docs/system/arm/{imx8mp-evk.rst => imx8m.rst}     |  49 +-
 docs/system/target-arm.rst                        |   2 +-
 hw/arm/Kconfig                                    |  25 +
 hw/arm/fsl-imx6ul.c                               |  12 +-
 hw/arm/fsl-imx8mm.c                               | 704 ++++++++++++++++++++++
 hw/arm/imx8mm-evk.c                               | 130 ++++
 hw/arm/integratorcp.c                             |   3 -
 hw/arm/meson.build                                |   2 +
 hw/arm/raspi4b.c                                  |  10 +-
 hw/arm/realview.c                                 |   2 +-
 hw/arm/vexpress.c                                 |   2 +-
 hw/arm/virt.c                                     |   1 -
 hw/display/Kconfig                                |   4 +
 hw/display/imx6ul_lcdif.c                         | 453 ++++++++++++++
 hw/display/meson.build                            |   1 +
 hw/misc/arm_sysctl.c                              |   2 +-
 hw/misc/imx8mp_analog.c                           |  12 +-
 hw/timer/imx_gpt.c                                |  26 +
 hw/vmapple/vmapple.c                              |   1 -
 include/hw/arm/fsl-imx6ul.h                       |   4 +-
 include/hw/arm/fsl-imx8mm.h                       | 242 ++++++++
 include/hw/arm/primecell.h                        |  12 -
 include/hw/display/imx6ul_lcdif.h                 |  37 ++
 include/hw/misc/arm_sysctl.h                      |  16 +
 include/hw/misc/imx8mp_analog.h                   |   3 +
 include/hw/timer/imx_gpt.h                        |   2 +
 target/arm/cpu-features.h                         |   5 +
 target/arm/cpu.c                                  | 153 ++++-
 target/arm/cpu.h                                  |   4 +-
 target/arm/cpu64.c                                |  39 ++
 target/arm/debug_helper.c                         |  29 -
 target/arm/helper.c                               |  27 +-
 target/arm/hvf/hvf.c                              |  14 +-
 target/arm/internals.h                            |  60 ++
 target/arm/machine.c                              |  33 +-
 target/arm/syndrome.h                             | 595 ++++++++++++++----
 target/arm/tcg/debug.c                            |   2 +-
 target/arm/tcg/helper-a64.c                       |   2 +-
 target/arm/tcg/helper-defs.h                      |   2 +-
 target/arm/tcg/m_helper.c                         |   8 +-
 target/arm/tcg/meson.build                        |   6 +-
 target/arm/tcg/mve_helper.c                       | 102 ++--
 target/arm/tcg/op_helper.c                        |   7 +-
 target/arm/tcg/tlb_helper.c                       |   6 +-
 target/arm/tcg/translate-a64.c                    |   2 +-
 target/arm/tcg/vfp_helper.c                       |   5 +-
 target/arm/trace-events                           |   2 +
 target/arm/whpx/whpx-all.c                        |  13 +-
 tests/functional/aarch64/meson.build              |   3 +
 tests/functional/aarch64/test_imx8mm_evk.py       |  69 +++
 tests/functional/aarch64/test_virt_aarch64_off.py |  37 ++
 tests/qtest/arm-cpu-features.c                    |   8 +-
 55 files changed, 2743 insertions(+), 275 deletions(-)
 rename docs/system/arm/{imx8mp-evk.rst => imx8m.rst} (58%)
 create mode 100644 hw/arm/fsl-imx8mm.c
 create mode 100644 hw/arm/imx8mm-evk.c
 create mode 100644 hw/display/imx6ul_lcdif.c
 create mode 100644 include/hw/arm/fsl-imx8mm.h
 delete mode 100644 include/hw/arm/primecell.h
 create mode 100644 include/hw/display/imx6ul_lcdif.h
 create mode 100644 include/hw/misc/arm_sysctl.h
 create mode 100755 tests/functional/aarch64/test_imx8mm_evk.py
 create mode 100755 tests/functional/aarch64/test_virt_aarch64_off.py

From: Alex Bennée <alex.bennee@linaro.org>

This is just a documentation tweak as we already support both.
FEAT_AA32 implies FEAT_AA32EL0. FEAT_AA64 implies FEAT_AA64EL[0123].

This is however useful if you are using emulation.rst as a source of
truth of what QEMU emulates and when cross checking with
Features.json from Arm.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20260421093506.616307-1-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 docs/system/arm/emulation.rst | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst
index XXXXXXX..XXXXXXX 100644
--- a/docs/system/arm/emulation.rst
+++ b/docs/system/arm/emulation.rst
@@ -XXX,XX +XXX,XX @@ QEMU's TCG emulation includes support for the Armv5, Armv6, Armv7,
 Armv8 and Armv9 versions of the A-profile architecture. It also has support for
 the following architecture extensions:
 
+- FEAT_AA32 (PE Support for AArch32)
 - FEAT_AA32BF16 (AArch32 BFloat16 instructions)
 - FEAT_AA32EL0 (Support for AArch32 at EL0)
 - FEAT_AA32EL1 (Support for AArch32 at EL1)
@@ -XXX,XX +XXX,XX @@ the following architecture extensions:
 - FEAT_AA32EL3 (Support for AArch32 at EL3)
 - FEAT_AA32HPD (AArch32 hierarchical permission disables)
 - FEAT_AA32I8MM (AArch32 Int8 matrix multiplication instructions)
+- FEAT_AA64 (PE uses AArch64 after last reboot)
 - FEAT_AA64EL0 (Support for AArch64 at EL0)
 - FEAT_AA64EL1 (Support for AArch64 at EL1)
 - FEAT_AA64EL2 (Support for AArch64 at EL2)
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

Implemented CPUs, RAM, UARTs and Interrupt Controller
Other peripherals are represented as TYPE_UNIMPLEMENTED_DEVICE
Complete memory map of the SoC is provided.

Set default RAM size to 2GB and default CPU count to 4 to match
the real i.MX8MM EVK hardware configuration.

Documentation is shared with imx8mp-evk to avoid duplication.

Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
[PMM: fixed over-long lines in doc]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 MAINTAINERS                                   |  11 +-
 docs/system/arm/{imx8mp-evk.rst => imx8m.rst} |  49 ++-
 docs/system/target-arm.rst                    |   2 +-
 hw/arm/Kconfig                                |  12 +
 hw/arm/fsl-imx8mm.c                           | 377 ++++++++++++++++++
 hw/arm/imx8mm-evk.c                           | 112 ++++++
 hw/arm/meson.build                            |   2 +
 include/hw/arm/fsl-imx8mm.h                   | 158 ++++++++
 8 files changed, 709 insertions(+), 14 deletions(-)
 rename docs/system/arm/{imx8mp-evk.rst => imx8m.rst} (58%)
 create mode 100644 hw/arm/fsl-imx8mm.c
 create mode 100644 hw/arm/imx8mm-evk.c
 create mode 100644 include/hw/arm/fsl-imx8mm.h

diff --git a/MAINTAINERS b/MAINTAINERS
index XXXXXXX..XXXXXXX 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -XXX,XX +XXX,XX @@ F: hw/pci-host/designware.c
 F: include/hw/pci-host/designware.h
 F: docs/system/arm/mcimx7d-sabre.rst
 
+MCIMX8MM-EVK / iMX8MM
+M: Gaurav Sharma <gaurav.sharma_7@nxp.com>
+L: qemu-arm@nongnu.org
+S: Maintained
+F: hw/arm/fsl-imx8mm.c
+F: hw/arm/imx8mm-evk.c
+F: include/hw/arm/fsl-imx8mm.h
+F: docs/system/arm/imx8m.rst
+
 MCIMX8MP-EVK / i.MX8MP
 M: Bernhard Beschow <shentey@gmail.com>
 L: qemu-arm@nongnu.org
@@ -XXX,XX +XXX,XX @@ F: hw/rtc/rs5c372.c
 F: include/hw/arm/fsl-imx8mp.h
 F: include/hw/misc/imx8mp_*.h
 F: include/hw/pci-host/fsl_imx8m_phy.h
-F: docs/system/arm/imx8mp-evk.rst
+F: docs/system/arm/imx8m.rst
 F: tests/functional/aarch64/test_imx8mp_evk.py
 F: tests/qtest/rs5c372-test.c
 
diff --git a/docs/system/arm/imx8mp-evk.rst b/docs/system/arm/imx8m.rst
similarity index 58%
rename from docs/system/arm/imx8mp-evk.rst
rename to docs/system/arm/imx8m.rst
index XXXXXXX..XXXXXXX 100644
--- a/docs/system/arm/imx8mp-evk.rst
+++ b/docs/system/arm/imx8m.rst
@@ -XXX,XX +XXX,XX @@
-NXP i.MX 8M Plus Evaluation Kit (``imx8mp-evk``)
-================================================
+NXP i.MX 8M Plus and i.MX 8M Mini Evaluation Kits (``imx8mp-evk``, ``imx8mm-evk``)
+==================================================================================
 
-The ``imx8mp-evk`` machine models the i.MX 8M Plus Evaluation Kit, based on an
-i.MX 8M Plus SoC.
+The ``imx8mp-evk`` and ``imx8mm-evk`` machine models the i.MX 8M Plus
+and i.MX 8M Mini Evaluation Kits, based on i.MX 8M Plus and i.MX8M
+Mini SoCs.
 
 Supported devices
 -----------------
 
-The ``imx8mp-evk`` machine implements the following devices:
+The ``imx8mp-evk`` and ``imx8mm-evk`` machines implement the
+following devices:
 
  * Up to 4 Cortex-A53 cores
  * Generic Interrupt Controller (GICv3)
@@ -XXX,XX +XXX,XX @@ The ``imx8mp-evk`` machine implements the following devices:
 Boot options
 ------------
 
-The ``imx8mp-evk`` machine can start a Linux kernel directly using the standard
-``-kernel`` functionality.
+The ``imx8mp-evk`` and ``imx8mm-evk`` machines can start a Linux
+kernel directly using the standard ``-kernel`` functionality.
 
 Direct Linux Kernel Boot
 ''''''''''''''''''''''''
@@ -XXX,XX +XXX,XX @@ is to generate an image with Buildroot. Version 2024.11.1 is tested at the time
 of writing and involves two steps. First run the following commands in the
 toplevel directory of the Buildroot source tree:
 
+For i.MX 8M Plus EVK:
+
 .. code-block:: bash
 
   $ make freescale_imx8mpevk_defconfig
   $ make
 
+For i.MX 8M Mini EVK:
+
+.. code-block:: bash
+
+  $ make freescale_imx8mmevk_defconfig
+  $ make
+
 Once finished successfully there is an ``output/image`` subfolder. Navigate into
 it and resize the SD card image to a power of two:
 
@@ -XXX,XX +XXX,XX @@ it and resize the SD card image to a power of two:
 
 Now that everything is prepared the machine can be started as follows:
 
+For i.MX 8M Plus EVK:
+
 .. code-block:: bash
 
   $ qemu-system-aarch64 -M imx8mp-evk \
@@ -XXX,XX +XXX,XX @@ Now that everything is prepared the machine can be started as follows:
       -append "root=/dev/mmcblk2p2" \
       -drive file=sdcard.img,if=sd,bus=2,format=raw,id=mmcblk2
 
+For i.MX 8M Mini EVK:
+
+.. code-block:: bash
+
+  $ qemu-system-aarch64 -M imx8mm-evk -smp 4 -m 2G \
+      -display none -serial null -serial stdio \
+      -kernel Image \
+      -dtb imx8mm-evk.dtb \
+      -append "root=/dev/mmcblk2p2" \
+      -drive file=sdcard.img,if=sd,bus=2,format=raw,id=mmcblk2
 
 KVM Acceleration
 ----------------
@@ -XXX,XX +XXX,XX @@ To enable hardware-assisted acceleration via KVM, append
 ``-accel kvm`` to the command line. While this speeds up performance
 significantly, be aware of the following limitations:
 
-* The ``imx8mp-evk`` machine is not included under the "virtualization use case"
-  of :doc:`QEMU's security policy </system/security>`. This means that you
-  should not trust that it can contain malicious guests, whether it is run
-  using TCG or KVM. If you don't trust your guests and you're relying on QEMU to
-  be the security boundary, you want to choose another machine such as ``virt``.
+* The ``imx8mp-evk`` and ``imx8mm-evk`` machines are not included
+  under the "virtualization use case" of :doc:`QEMU's security
+  policy </system/security>`.  This means that you should not trust that
+  it can contain malicious guests, whether it is run using TCG or KVM.
+  If you don't trust your guests and you're relying on QEMU to be the
+  security boundary, you want to choose another machine such as
+  ``virt``.
 * Rather than Cortex-A53 CPUs, the same CPU type as the host's will be used.
   This is a limitation of KVM and may not work with guests with a tight
   dependency on Cortex-A53.
diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst
index XXXXXXX..XXXXXXX 100644
--- a/docs/system/target-arm.rst
+++ b/docs/system/target-arm.rst
@@ -XXX,XX +XXX,XX @@ Board-specific documentation
    arm/imx25-pdk
    arm/mcimx6ul-evk
    arm/mcimx7d-sabre
-   arm/imx8mp-evk
+   arm/imx8m
    arm/orangepi
    arm/raspi
    arm/collie
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -XXX,XX +XXX,XX @@ config FSL_IMX8MP_EVK
     depends on TCG
     select FSL_IMX8MP
 
+config FSL_IMX8MM
+    bool
+    select ARM_GIC
+    select IMX
+
+config FSL_IMX8MM_EVK
+    bool
+    default y
+    depends on AARCH64
+    depends on TCG
+    select FSL_IMX8MM
+
 config ARM_SMMUV3_ACCEL
     bool
     depends on ARM_SMMUV3
diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/hw/arm/fsl-imx8mm.c
@@ -XXX,XX +XXX,XX @@
+/*
+ * i.MX 8MM SoC Implementation
+ *
+ * Based on hw/arm/fsl-imx6.c
+ *
+ * Copyright (c) 2025, NXP Semiconductors
+ * Author: Gaurav Sharma <gaurav.sharma_7@nxp.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * iMX8MM Reference Manual - https://www.nxp.com/products/i.MX8MMINI -> Documentation
+ */
+
+#include "qemu/osdep.h"
+#include "system/address-spaces.h"
+#include "hw/arm/bsa.h"
+#include "hw/arm/fsl-imx8mm.h"
+#include "hw/misc/unimp.h"
+#include "hw/core/boards.h"
+#include "system/kvm.h"
+#include "system/system.h"
+#include "target/arm/cpu.h"
+#include "target/arm/cpu-qom.h"
+#include "target/arm/kvm_arm.h"
+#include "qapi/error.h"
+#include "qobject/qlist.h"
+
+static const struct {
+    hwaddr addr;
+    size_t size;
+    const char *name;
+} fsl_imx8mm_memmap[] = {
+    [FSL_IMX8MM_RAM] = { FSL_IMX8MM_RAM_START, FSL_IMX8MM_RAM_SIZE_MAX, "ram" },
+    [FSL_IMX8MM_DDR_PHY_BROADCAST] = { 0x3dc00000, 4 * MiB, "ddr_phy_broadcast" },
+    [FSL_IMX8MM_DDR_PERF_MON] = { 0x3d800000, 4 * MiB, "ddr_perf_mon" },
+    [FSL_IMX8MM_DDR_CTL] = { 0x3d400000, 4 * MiB, "ddr_ctl" },
+    [FSL_IMX8MM_DDR_PHY] = { 0x3c000000, 16 * MiB, "ddr_phy" },
+    [FSL_IMX8MM_GIC_DIST] = { 0x38800000, 512 * KiB, "gic_dist" },
+    [FSL_IMX8MM_GIC_REDIST] = { 0x38880000, 512 * KiB, "gic_redist" },
+    [FSL_IMX8MM_VPU] = { 0x38340000, 2 * MiB, "vpu" },
+    [FSL_IMX8MM_VPU_BLK_CTRL] = { 0x38330000, 2 * MiB, "vpu_blk_ctrl" },
+    [FSL_IMX8MM_VPU_G2_DECODER] = { 0x38310000, 1 * MiB, "vpu_g2_decoder" },
+    [FSL_IMX8MM_VPU_G1_DECODER] = { 0x38300000, 1 * MiB, "vpu_g1_decoder" },
+    [FSL_IMX8MM_USB2_OTG] = { 0x32e50200, 0x200, "usb2_otg" },
+    [FSL_IMX8MM_USB2] = { 0x32e50000, 0x200, "usb2" },
+    [FSL_IMX8MM_USB1_OTG] = { 0x32e40200, 0x200, "usb1_otg" },
+    [FSL_IMX8MM_USB1] = { 0x32e40000, 0x200, "usb1" },
+    [FSL_IMX8MM_GPU2D] = { 0x38000000, 64 * KiB, "gpu2d" },
+    [FSL_IMX8MM_QSPI1_RX_BUFFER] = { 0x34000000, 32 * MiB, "qspi1_rx_buffer" },
+    [FSL_IMX8MM_PCIE1] = { 0x33800000, 4 * MiB, "pcie1" },
+    [FSL_IMX8MM_QSPI1_TX_BUFFER] = { 0x33008000, 32 * KiB, "qspi1_tx_buffer" },
+    [FSL_IMX8MM_APBH_DMA] = { 0x33000000, 32 * KiB, "apbh_dma" },
+
+    /* AIPS-4 Begin */
+    [FSL_IMX8MM_TZASC] = { 0x32f80000, 64 * KiB, "tzasc" },
+    [FSL_IMX8MM_PCIE_PHY1] = { 0x32f00000, 64 * KiB, "pcie_phy1" },
+    [FSL_IMX8MM_MEDIA_BLK_CTL] = { 0x32e28000, 256, "media_blk_ctl" },
+    [FSL_IMX8MM_LCDIF] = { 0x32e00000, 64 * KiB, "lcdif" },
+    [FSL_IMX8MM_MIPI_DSI] = { 0x32e10000, 64 * KiB, "mipi_dsi" },
+    [FSL_IMX8MM_MIPI_CSI] = { 0x32e30000, 64 * KiB, "mipi_csi" },
+    [FSL_IMX8MM_AIPS4_CONFIGURATION] = { 0x32df0000, 64 * KiB, "aips4_configuration" },
+    /* AIPS-4 End */
+
+    [FSL_IMX8MM_INTERCONNECT] = { 0x32700000, 1 * MiB, "interconnect" },
+
+    /* AIPS-3 Begin */
+    [FSL_IMX8MM_ENET1] = { 0x30be0000, 64 * KiB, "enet1" },
+    [FSL_IMX8MM_SDMA1] = { 0x30bd0000, 64 * KiB, "sdma1" },
+    [FSL_IMX8MM_QSPI] = { 0x30bb0000, 64 * KiB, "qspi" },
+    [FSL_IMX8MM_USDHC3] = { 0x30b60000, 64 * KiB, "usdhc3" },
+    [FSL_IMX8MM_USDHC2] = { 0x30b50000, 64 * KiB, "usdhc2" },
+    [FSL_IMX8MM_USDHC1] = { 0x30b40000, 64 * KiB, "usdhc1" },
+    [FSL_IMX8MM_SEMAPHORE_HS] = { 0x30ac0000, 64 * KiB, "semaphore_hs" },
+    [FSL_IMX8MM_MU_B] = { 0x30ab0000, 64 * KiB, "mu_b" },
+    [FSL_IMX8MM_MU_A] = { 0x30aa0000, 64 * KiB, "mu_a" },
+    [FSL_IMX8MM_UART4] = { 0x30a60000, 64 * KiB, "uart4" },
+    [FSL_IMX8MM_I2C4] = { 0x30a50000, 64 * KiB, "i2c4" },
+    [FSL_IMX8MM_I2C3] = { 0x30a40000, 64 * KiB, "i2c3" },
+    [FSL_IMX8MM_I2C2] = { 0x30a30000, 64 * KiB, "i2c2" },
+    [FSL_IMX8MM_I2C1] = { 0x30a20000, 64 * KiB, "i2c1" },
+    [FSL_IMX8MM_AIPS3_CONFIGURATION] = { 0x309f0000, 64 * KiB, "aips3_configuration" },
+    [FSL_IMX8MM_CAAM] = { 0x30900000, 256 * KiB, "caam" },
+    [FSL_IMX8MM_SPBA1] = { 0x308f0000, 64 * KiB, "spba1" },
+    [FSL_IMX8MM_UART2] = { 0x30890000, 64 * KiB, "uart2" },
+    [FSL_IMX8MM_UART3] = { 0x30880000, 64 * KiB, "uart3" },
+    [FSL_IMX8MM_UART1] = { 0x30860000, 64 * KiB, "uart1" },
+    [FSL_IMX8MM_ECSPI3] = { 0x30840000, 64 * KiB, "ecspi3" },
+    [FSL_IMX8MM_ECSPI2] = { 0x30830000, 64 * KiB, "ecspi2" },
+    [FSL_IMX8MM_ECSPI1] = { 0x30820000, 64 * KiB, "ecspi1" },
+    /* AIPS-3 End */
+
+    /* AIPS-2 Begin */
+    [FSL_IMX8MM_QOSC] = { 0x307f0000, 64 * KiB, "qosc" },
+    [FSL_IMX8MM_PERFMON2] = { 0x307d0000, 64 * KiB, "perfmon2" },
+    [FSL_IMX8MM_PERFMON1] = { 0x307c0000, 64 * KiB, "perfmon1" },
+    [FSL_IMX8MM_GPT4] = { 0x30700000, 64 * KiB, "gpt4" },
+    [FSL_IMX8MM_GPT5] = { 0x306f0000, 64 * KiB, "gpt5" },
+    [FSL_IMX8MM_GPT6] = { 0x306e0000, 64 * KiB, "gpt6" },
+    [FSL_IMX8MM_SYSCNT_CTRL] = { 0x306c0000, 64 * KiB, "syscnt_ctrl" },
+    [FSL_IMX8MM_SYSCNT_CMP] = { 0x306b0000, 64 * KiB, "syscnt_cmp" },
+    [FSL_IMX8MM_SYSCNT_RD] = { 0x306a0000, 64 * KiB, "syscnt_rd" },
+    [FSL_IMX8MM_PWM4] = { 0x30690000, 64 * KiB, "pwm4" },
+    [FSL_IMX8MM_PWM3] = { 0x30680000, 64 * KiB, "pwm3" },
+    [FSL_IMX8MM_PWM2] = { 0x30670000, 64 * KiB, "pwm2" },
+    [FSL_IMX8MM_PWM1] = { 0x30660000, 64 * KiB, "pwm1" },
+    [FSL_IMX8MM_AIPS2_CONFIGURATION] = { 0x305f0000, 64 * KiB, "aips2_configuration" },
+    /* AIPS-2 End */
+
+    /* AIPS-1 Begin */
+    [FSL_IMX8MM_CSU] = { 0x303e0000, 64 * KiB, "csu" },
+    [FSL_IMX8MM_RDC] = { 0x303d0000, 64 * KiB, "rdc" },
+    [FSL_IMX8MM_SEMAPHORE2] = { 0x303c0000, 64 * KiB, "semaphore2" },
+    [FSL_IMX8MM_SEMAPHORE1] = { 0x303b0000, 64 * KiB, "semaphore1" },
+    [FSL_IMX8MM_GPC] = { 0x303a0000, 64 * KiB, "gpc" },
+    [FSL_IMX8MM_SRC] = { 0x30390000, 64 * KiB, "src" },
+    [FSL_IMX8MM_CCM] = { 0x30380000, 64 * KiB, "ccm" },
+    [FSL_IMX8MM_SNVS_HP] = { 0x30370000, 64 * KiB, "snvs_hp" },
+    [FSL_IMX8MM_ANA_PLL] = { 0x30360000, 64 * KiB, "ana_pll" },
+    [FSL_IMX8MM_OCOTP_CTRL] = { 0x30350000, 64 * KiB, "ocotp_ctrl" },
+    [FSL_IMX8MM_IOMUXC_GPR] = { 0x30340000, 64 * KiB, "iomuxc_gpr" },
+    [FSL_IMX8MM_IOMUXC] = { 0x30330000, 64 * KiB, "iomuxc" },
+    [FSL_IMX8MM_GPT3] = { 0x302f0000, 64 * KiB, "gpt3" },
+    [FSL_IMX8MM_GPT2] = { 0x302e0000, 64 * KiB, "gpt2" },
+    [FSL_IMX8MM_GPT1] = { 0x302d0000, 64 * KiB, "gpt1" },
+    [FSL_IMX8MM_SDMA2] = { 0x302c0000, 64 * KiB, "sdma2" },
+    [FSL_IMX8MM_SDMA3] = { 0x302b0000, 64 * KiB, "sdma3" },
+    [FSL_IMX8MM_WDOG3] = { 0x302a0000, 64 * KiB, "wdog3" },
+    [FSL_IMX8MM_WDOG2] = { 0x30290000, 64 * KiB, "wdog2" },
+    [FSL_IMX8MM_WDOG1] = { 0x30280000, 64 * KiB, "wdog1" },
+    [FSL_IMX8MM_ANA_OSC] = { 0x30270000, 64 * KiB, "ana_osc" },
+    [FSL_IMX8MM_ANA_TSENSOR] = { 0x30260000, 64 * KiB, "ana_tsensor" },
+    [FSL_IMX8MM_GPIO5] = { 0x30240000, 64 * KiB, "gpio5" },
+    [FSL_IMX8MM_GPIO4] = { 0x30230000, 64 * KiB, "gpio4" },
+    [FSL_IMX8MM_GPIO3] = { 0x30220000, 64 * KiB, "gpio3" },
+    [FSL_IMX8MM_GPIO2] = { 0x30210000, 64 * KiB, "gpio2" },
+    [FSL_IMX8MM_GPIO1] = { 0x30200000, 64 * KiB, "gpio1" },
+    [FSL_IMX8MM_AIPS1_CONFIGURATION] = { 0x301f0000, 64 * KiB, "aips1_configuration" },
+    [FSL_IMX8MM_SAI6] = { 0x30060000, 64 * KiB, "sai6" },
+    [FSL_IMX8MM_SAI5] = { 0x30050000, 64 * KiB, "sai5" },
+    [FSL_IMX8MM_SAI3] = { 0x30030000, 64 * KiB, "sai3" },
+    [FSL_IMX8MM_SAI2] = { 0x30020000, 64 * KiB, "sai2" },
+    [FSL_IMX8MM_SAI1] = { 0x30010000, 64 * KiB, "sai1" },
+
+    /* AIPS-1 End */
+
+    [FSL_IMX8MM_A53_DAP] = { 0x28000000, 16 * MiB, "a53_dap" },
+    [FSL_IMX8MM_PCIE1_MEM] = { 0x18000000, 128 * MiB, "pcie1_mem" },
+    [FSL_IMX8MM_QSPI_MEM] = { 0x08000000, 256 * MiB, "qspi_mem" },
+    [FSL_IMX8MM_OCRAM] = { 0x00900000, 256 * KiB, "ocram" },
+    [FSL_IMX8MM_TCM_DTCM] = { 0x00800000, 128 * KiB, "tcm_dtcm" },
+    [FSL_IMX8MM_TCM_ITCM] = { 0x007e0000, 128 * KiB, "tcm_itcm" },
+    [FSL_IMX8MM_OCRAM_S] = { 0x00180000, 32 * KiB, "ocram_s" },
+    [FSL_IMX8MM_CAAM_MEM] = { 0x00100000, 32 * KiB, "caam_mem" },
+    [FSL_IMX8MM_BOOT_ROM_PROTECTED] = { 0x0003f000, 4 * KiB, "boot_rom_protected" },
+    [FSL_IMX8MM_BOOT_ROM] = { 0x00000000, 252 * KiB, "boot_rom" },
+};
+
+static void fsl_imx8mm_init(Object *obj)
+{
+    MachineState *ms = MACHINE(qdev_get_machine());
+    FslImx8mmState *s = FSL_IMX8MM(obj);
+    const char *cpu_type = ms->cpu_type ?: ARM_CPU_TYPE_NAME("cortex-a53");
+    int i;
+
+    for (i = 0; i < MIN(ms->smp.cpus, FSL_IMX8MM_NUM_CPUS); i++) {
+        g_autofree char *name = g_strdup_printf("cpu%d", i);
+        object_initialize_child(obj, name, &s->cpu[i], cpu_type);
+    }
+
+    object_initialize_child(obj, "gic", &s->gic, gicv3_class_name());
+
+    for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) {
+        g_autofree char *name = g_strdup_printf("uart%d", i + 1);
+        object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL);
+    }
+
+}
+
+static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
+{
+    MachineState *ms = MACHINE(qdev_get_machine());
+    FslImx8mmState *s = FSL_IMX8MM(dev);
+    DeviceState *gicdev = DEVICE(&s->gic);
+    int i;
+
+    if (ms->smp.cpus > FSL_IMX8MM_NUM_CPUS) {
+        error_setg(errp, "%s: Only %d CPUs are supported (%d requested)",
+                   TYPE_FSL_IMX8MM, FSL_IMX8MM_NUM_CPUS, ms->smp.cpus);
+        return;
+    }
+
+    /* CPUs */
+    for (i = 0; i < ms->smp.cpus; i++) {
+        /* On uniprocessor, the CBAR is set to 0 */
+        if (ms->smp.cpus > 1 &&
+                object_property_find(OBJECT(&s->cpu[i]), "reset-cbar")) {
+            object_property_set_int(OBJECT(&s->cpu[i]), "reset-cbar",
+                                    fsl_imx8mm_memmap[FSL_IMX8MM_GIC_DIST].addr,
+                                    &error_abort);
+        }
+
+        /*
+         * CNTFID0 base frequency in Hz of system counter
+         */
+        object_property_set_int(OBJECT(&s->cpu[i]), "cntfrq", 8000000,
+                                &error_abort);
+
+        if (object_property_find(OBJECT(&s->cpu[i]), "has_el2")) {
+            object_property_set_bool(OBJECT(&s->cpu[i]), "has_el2",
+                                     !kvm_enabled(), &error_abort);
+        }
+
+        if (object_property_find(OBJECT(&s->cpu[i]), "has_el3")) {
+            object_property_set_bool(OBJECT(&s->cpu[i]), "has_el3",
+                                     !kvm_enabled(), &error_abort);
+        }
+
+        if (i) {
+            /*
+             * Secondary CPUs start in powered-down state (and can be
+             * powered up via the SRC system reset controller)
+             */
+            object_property_set_bool(OBJECT(&s->cpu[i]), "start-powered-off",
+                                     true, &error_abort);
+        }
+
+        if (!qdev_realize(DEVICE(&s->cpu[i]), NULL, errp)) {
+            return;
+        }
+    }
+
+    /* GIC */
+    {
+        SysBusDevice *gicsbd = SYS_BUS_DEVICE(&s->gic);
+        QList *redist_region_count;
+        bool pmu = object_property_get_bool(OBJECT(first_cpu), "pmu", NULL);
+
+        qdev_prop_set_uint32(gicdev, "num-cpu", ms->smp.cpus);
+        qdev_prop_set_uint32(gicdev, "num-irq",
+                             FSL_IMX8MM_NUM_IRQS + GIC_INTERNAL);
+        redist_region_count = qlist_new();
+        qlist_append_int(redist_region_count, ms->smp.cpus);
+        qdev_prop_set_array(gicdev, "redist-region-count", redist_region_count);
+        object_property_set_link(OBJECT(&s->gic), "sysmem",
+                                 OBJECT(get_system_memory()), &error_fatal);
+        if (!sysbus_realize(gicsbd, errp)) {
+            return;
+        }
+        sysbus_mmio_map(gicsbd, 0, fsl_imx8mm_memmap[FSL_IMX8MM_GIC_DIST].addr);
+        sysbus_mmio_map(gicsbd, 1, fsl_imx8mm_memmap[FSL_IMX8MM_GIC_REDIST].addr);
+
+        /*
+         * Wire the outputs from each CPU's generic timer and the GICv3
+         * maintenance interrupt signal to the appropriate GIC PPI inputs, and
+         * the GIC's IRQ/FIQ interrupt outputs to the CPU's inputs.
+         */
+        for (i = 0; i < ms->smp.cpus; i++) {
+            DeviceState *cpudev = DEVICE(&s->cpu[i]);
+            int intidbase = FSL_IMX8MM_NUM_IRQS + i * GIC_INTERNAL;
+            qemu_irq irq;
+
+            /*
+             * Mapping from the output timer irq lines from the CPU to the
+             * GIC PPI inputs.
+             */
+            static const int timer_irqs[] = {
+                [GTIMER_PHYS] = ARCH_TIMER_NS_EL1_IRQ,
+                [GTIMER_VIRT] = ARCH_TIMER_VIRT_IRQ,
+                [GTIMER_HYP]  = ARCH_TIMER_NS_EL2_IRQ,
+                [GTIMER_SEC]  = ARCH_TIMER_S_EL1_IRQ,
+            };
+
+            for (int j = 0; j < ARRAY_SIZE(timer_irqs); j++) {
+                irq = qdev_get_gpio_in(gicdev, intidbase + timer_irqs[j]);
+                qdev_connect_gpio_out(cpudev, j, irq);
+            }
+
+            irq = qdev_get_gpio_in(gicdev, intidbase + ARCH_GIC_MAINT_IRQ);
+            qdev_connect_gpio_out_named(cpudev, "gicv3-maintenance-interrupt",
+                                        0, irq);
+
+            irq = qdev_get_gpio_in(gicdev, intidbase + VIRTUAL_PMU_IRQ);
+            qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0, irq);
+
+            sysbus_connect_irq(gicsbd, i,
+                               qdev_get_gpio_in(cpudev, ARM_CPU_IRQ));
+            sysbus_connect_irq(gicsbd, i + ms->smp.cpus,
+                               qdev_get_gpio_in(cpudev, ARM_CPU_FIQ));
+            sysbus_connect_irq(gicsbd, i + 2 * ms->smp.cpus,
+                               qdev_get_gpio_in(cpudev, ARM_CPU_VIRQ));
+            sysbus_connect_irq(gicsbd, i + 3 * ms->smp.cpus,
+                               qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ));
+
+            if (kvm_enabled()) {
+                if (pmu) {
+                    assert(arm_feature(&s->cpu[i].env, ARM_FEATURE_PMU));
+                    if (kvm_irqchip_in_kernel()) {
+                        kvm_arm_pmu_set_irq(&s->cpu[i], VIRTUAL_PMU_IRQ);
+                    }
+                    kvm_arm_pmu_init(&s->cpu[i]);
+                }
+            }
+        }
+    }
+
+    /* UARTs */
+    for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) {
+        static const struct {
+            hwaddr addr;
+            unsigned int irq;
+        } serial_table[FSL_IMX8MM_NUM_UARTS] = {
+            { fsl_imx8mm_memmap[FSL_IMX8MM_UART1].addr, FSL_IMX8MM_UART1_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_UART2].addr, FSL_IMX8MM_UART2_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_UART3].addr, FSL_IMX8MM_UART3_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_UART4].addr, FSL_IMX8MM_UART4_IRQ },
+        };
+
+        qdev_prop_set_chr(DEVICE(&s->uart[i]), "chardev", serial_hd(i));
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->uart[i]), errp)) {
+            return;
+        }
+
+        sysbus_mmio_map(SYS_BUS_DEVICE(&s->uart[i]), 0, serial_table[i].addr);
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->uart[i]), 0,
+                           qdev_get_gpio_in(gicdev, serial_table[i].irq));
+    }
+
+    /* On-Chip RAM */
+    if (!memory_region_init_ram(&s->ocram, OBJECT(dev), "imx8mm.ocram",
+                                fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].size,
+                                errp)) {
+        return;
+    }
+    memory_region_add_subregion(get_system_memory(),
+                                fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr,
+                                &s->ocram);
+
+    /* Unimplemented devices */
+    for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) {
+        switch (i) {
+        case FSL_IMX8MM_GIC_DIST:
+        case FSL_IMX8MM_GIC_REDIST:
+        case FSL_IMX8MM_RAM:
+        case FSL_IMX8MM_OCRAM:
+        case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4:
+            /* device implemented and treated above */
+            break;
+
+        default:
+            create_unimplemented_device(fsl_imx8mm_memmap[i].name,
+                                        fsl_imx8mm_memmap[i].addr,
+                                        fsl_imx8mm_memmap[i].size);
+            break;
+        }
+    }
+}
+
+static void fsl_imx8mm_class_init(ObjectClass *oc, const void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(oc);
+
+    dc->realize = fsl_imx8mm_realize;
+
+    dc->desc = "i.MX 8MM SoC";
+}
+
+static const TypeInfo fsl_imx8mm_types[] = {
+    {
+        .name = TYPE_FSL_IMX8MM,
+        .parent = TYPE_SYS_BUS_DEVICE,
+        .instance_size = sizeof(FslImx8mmState),
+        .instance_init = fsl_imx8mm_init,
+        .class_init = fsl_imx8mm_class_init,
+    },
+};
+
+DEFINE_TYPES(fsl_imx8mm_types)
diff --git a/hw/arm/imx8mm-evk.c b/hw/arm/imx8mm-evk.c
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/hw/arm/imx8mm-evk.c
@@ -XXX,XX +XXX,XX @@
+/*
+ * NXP i.MX 8MM Evaluation Kit System Emulation
+ *
+ * Copyright (c) 2025, NXP Semiconductors
+ * Author: Gaurav Sharma <gaurav.sharma_7@nxp.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "system/address-spaces.h"
+#include "hw/arm/boot.h"
+#include "hw/arm/fsl-imx8mm.h"
+#include "hw/arm/machines-qom.h"
+#include "hw/core/boards.h"
+#include "hw/core/qdev-properties.h"
+#include "system/kvm.h"
+#include "system/qtest.h"
+#include "qemu/error-report.h"
+#include "qapi/error.h"
+#include <libfdt.h>
+
+static void imx8mm_evk_modify_dtb(const struct arm_boot_info *info, void *fdt)
+{
+    int i, offset;
+
+    /* Temporarily disable following nodes until they are implemented */
+    const char *nodes_to_remove[] = {
+        "nxp,imx8mm-fspi",
+        "fsl,imx8mm-mipi-csi",
+        "fsl,imx8mm-mipi-dsim"
+    };
+
+    for (i = 0; i < ARRAY_SIZE(nodes_to_remove); i++) {
+        const char *dev_str = nodes_to_remove[i];
+
+        offset = fdt_node_offset_by_compatible(fdt, -1, dev_str);
+        while (offset >= 0) {
+            fdt_nop_node(fdt, offset);
+            offset = fdt_node_offset_by_compatible(fdt, offset, dev_str);
+        }
+    }
+
+    /* Remove cpu-idle-states property from CPU nodes */
+    offset = fdt_node_offset_by_compatible(fdt, -1, "arm,cortex-a53");
+    while (offset >= 0) {
+        fdt_nop_property(fdt, offset, "cpu-idle-states");
+        offset = fdt_node_offset_by_compatible(fdt, offset, "arm,cortex-a53");
+    }
+
+    if (kvm_enabled()) {
+        /* Use system counter frequency from host CPU to fix time in guest */
+        offset = fdt_node_offset_by_compatible(fdt, -1, "arm,armv8-timer");
+        while (offset >= 0) {
+            fdt_nop_property(fdt, offset, "clock-frequency");
+            offset = fdt_node_offset_by_compatible(fdt, offset, "arm,armv8-timer");
+        }
+    }
+}
+
+static void imx8mm_evk_init(MachineState *machine)
+{
+    static struct arm_boot_info boot_info;
+    FslImx8mmState *s;
+
+    if (machine->ram_size > FSL_IMX8MM_RAM_SIZE_MAX) {
+        error_report("RAM size " RAM_ADDR_FMT " above max supported (%08" PRIx64 ")",
+                     machine->ram_size, FSL_IMX8MM_RAM_SIZE_MAX);
+        exit(1);
+    }
+
+    boot_info = (struct arm_boot_info) {
+        .loader_start = FSL_IMX8MM_RAM_START,
+        .board_id = -1,
+        .ram_size = machine->ram_size,
+        .psci_conduit = QEMU_PSCI_CONDUIT_SMC,
+        .modify_dtb = imx8mm_evk_modify_dtb,
+    };
+
+    s = FSL_IMX8MM(object_new_with_props(TYPE_FSL_IMX8MM, OBJECT(machine),
+                                         "soc", &error_fatal, NULL));
+    sysbus_realize_and_unref(SYS_BUS_DEVICE(s), &error_fatal);
+
+    memory_region_add_subregion(get_system_memory(), FSL_IMX8MM_RAM_START,
+                                machine->ram);
+
+    if (!qtest_enabled()) {
+        arm_load_kernel(&s->cpu[0], machine, &boot_info);
+    }
+}
+
+static const char *imx8mm_evk_get_default_cpu_type(const MachineState *ms)
+{
+    if (kvm_enabled()) {
+        return ARM_CPU_TYPE_NAME("host");
+    }
+
+    return ARM_CPU_TYPE_NAME("cortex-a53");
+}
+
+static void imx8mm_evk_machine_init(MachineClass *mc)
+{
+    mc->desc = "NXP i.MX 8MM EVK Board";
+    mc->init = imx8mm_evk_init;
+    mc->max_cpus = FSL_IMX8MM_NUM_CPUS;
+    mc->default_cpus = FSL_IMX8MM_NUM_CPUS;
+    mc->default_ram_size = 2 * GiB;
+    mc->default_ram_id = "imx8mm-evk.ram";
+    mc->get_default_cpu_type = imx8mm_evk_get_default_cpu_type;
+}
+
+DEFINE_MACHINE_AARCH64("imx8mm-evk", imx8mm_evk_machine_init)
diff --git a/hw/arm/meson.build b/hw/arm/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/meson.build
+++ b/hw/arm/meson.build
@@ -XXX,XX +XXX,XX @@ arm_common_ss.add(when: 'CONFIG_ARMSSE', if_true: files('armsse.c'))
 arm_common_ss.add(when: 'CONFIG_FSL_IMX7', if_true: files('fsl-imx7.c', 'mcimx7d-sabre.c'))
 arm_common_ss.add(when: 'CONFIG_FSL_IMX8MP', if_true: files('fsl-imx8mp.c'))
 arm_common_ss.add(when: 'CONFIG_FSL_IMX8MP_EVK', if_true: files('imx8mp-evk.c'))
+arm_common_ss.add(when: 'CONFIG_FSL_IMX8MM', if_true: files('fsl-imx8mm.c'))
+arm_common_ss.add(when: 'CONFIG_FSL_IMX8MM_EVK', if_true: files('imx8mm-evk.c'))
 arm_common_ss.add(when: 'CONFIG_ARM_SMMUV3', if_true: files('smmuv3.c'))
 arm_common_ss.add(when: 'CONFIG_ARM_SMMUV3_ACCEL', if_true: files('smmuv3-accel.c'))
 stub_ss.add(files('smmuv3-accel-stubs.c'))
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -XXX,XX +XXX,XX @@
+/*
+ * i.MX 8MM SoC Definitions
+ *
+ * Copyright (c) 2025, NXP Semiconductors
+ * Author: Gaurav Sharma <gaurav.sharma_7@nxp.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#ifndef FSL_IMX8MM_H
+#define FSL_IMX8MM_H
+
+#include "cpu.h"
+#include "hw/char/imx_serial.h"
+#include "hw/intc/arm_gicv3_common.h"
+#include "qom/object.h"
+#include "qemu/units.h"
+
+#define TYPE_FSL_IMX8MM "fsl-imx8mm"
+OBJECT_DECLARE_SIMPLE_TYPE(FslImx8mmState, FSL_IMX8MM)
+
+#define FSL_IMX8MM_RAM_START        0x40000000
+#define FSL_IMX8MM_RAM_SIZE_MAX     (4 * GiB)
+
+enum FslImx8mmConfiguration {
+    FSL_IMX8MM_NUM_CPUS         = 4,
+    FSL_IMX8MM_NUM_IRQS         = 128,
+    FSL_IMX8MM_NUM_UARTS        = 4,
+};
+
+struct FslImx8mmState {
+    SysBusDevice   parent_obj;
+
+    ARMCPU             cpu[FSL_IMX8MM_NUM_CPUS];
+    GICv3State         gic;
+    IMXSerialState     uart[FSL_IMX8MM_NUM_UARTS];
+    MemoryRegion ocram;
+};
+
+enum FslImx8mmMemoryRegions {
+    FSL_IMX8MM_A53_DAP,
+    FSL_IMX8MM_AIPS1_CONFIGURATION,
+    FSL_IMX8MM_AIPS2_CONFIGURATION,
+    FSL_IMX8MM_AIPS3_CONFIGURATION,
+    FSL_IMX8MM_AIPS4_CONFIGURATION,
+    FSL_IMX8MM_ANA_OSC,
+    FSL_IMX8MM_ANA_PLL,
+    FSL_IMX8MM_ANA_TSENSOR,
+    FSL_IMX8MM_APBH_DMA,
+    FSL_IMX8MM_BOOT_ROM,
+    FSL_IMX8MM_BOOT_ROM_PROTECTED,
+    FSL_IMX8MM_CAAM,
+    FSL_IMX8MM_CAAM_MEM,
+    FSL_IMX8MM_CCM,
+    FSL_IMX8MM_CSU,
+    FSL_IMX8MM_DDR_CTL,
+    FSL_IMX8MM_DDR_PERF_MON,
+    FSL_IMX8MM_DDR_PHY,
+    FSL_IMX8MM_DDR_PHY_BROADCAST,
+    FSL_IMX8MM_ECSPI1,
+    FSL_IMX8MM_ECSPI2,
+    FSL_IMX8MM_ECSPI3,
+    FSL_IMX8MM_ENET1,
+    FSL_IMX8MM_GIC_DIST,
+    FSL_IMX8MM_GIC_REDIST,
+    FSL_IMX8MM_GPC,
+    FSL_IMX8MM_GPIO1,
+    FSL_IMX8MM_GPIO2,
+    FSL_IMX8MM_GPIO3,
+    FSL_IMX8MM_GPIO4,
+    FSL_IMX8MM_GPIO5,
+    FSL_IMX8MM_GPT1,
+    FSL_IMX8MM_GPT2,
+    FSL_IMX8MM_GPT3,
+    FSL_IMX8MM_GPT4,
+    FSL_IMX8MM_GPT5,
+    FSL_IMX8MM_GPT6,
+    FSL_IMX8MM_GPU2D,
+    FSL_IMX8MM_I2C1,
+    FSL_IMX8MM_I2C2,
+    FSL_IMX8MM_I2C3,
+    FSL_IMX8MM_I2C4,
+    FSL_IMX8MM_INTERCONNECT,
+    FSL_IMX8MM_IOMUXC,
+    FSL_IMX8MM_IOMUXC_GPR,
+    FSL_IMX8MM_MEDIA_BLK_CTL,
+    FSL_IMX8MM_LCDIF,
+    FSL_IMX8MM_MIPI_CSI,
+    FSL_IMX8MM_MIPI_DSI,
+    FSL_IMX8MM_MU_A,
+    FSL_IMX8MM_MU_B,
+    FSL_IMX8MM_OCOTP_CTRL,
+    FSL_IMX8MM_OCRAM,
+    FSL_IMX8MM_OCRAM_S,
+    FSL_IMX8MM_PCIE1,
+    FSL_IMX8MM_PCIE1_MEM,
+    FSL_IMX8MM_PCIE_PHY1,
+    FSL_IMX8MM_PERFMON1,
+    FSL_IMX8MM_PERFMON2,
+    FSL_IMX8MM_PWM1,
+    FSL_IMX8MM_PWM2,
+    FSL_IMX8MM_PWM3,
+    FSL_IMX8MM_PWM4,
+    FSL_IMX8MM_QOSC,
+    FSL_IMX8MM_QSPI,
+    FSL_IMX8MM_QSPI1_RX_BUFFER,
+    FSL_IMX8MM_QSPI1_TX_BUFFER,
+    FSL_IMX8MM_QSPI_MEM,
+    FSL_IMX8MM_RAM,
+    FSL_IMX8MM_RDC,
+    FSL_IMX8MM_SAI1,
+    FSL_IMX8MM_SAI2,
+    FSL_IMX8MM_SAI3,
+    FSL_IMX8MM_SAI5,
+    FSL_IMX8MM_SAI6,
+    FSL_IMX8MM_SDMA1,
+    FSL_IMX8MM_SDMA2,
+    FSL_IMX8MM_SDMA3,
+    FSL_IMX8MM_SEMAPHORE1,
+    FSL_IMX8MM_SEMAPHORE2,
+    FSL_IMX8MM_SEMAPHORE_HS,
+    FSL_IMX8MM_SNVS_HP,
+    FSL_IMX8MM_SPBA1,
+    FSL_IMX8MM_SRC,
+    FSL_IMX8MM_SYSCNT_CMP,
+    FSL_IMX8MM_SYSCNT_CTRL,
+    FSL_IMX8MM_SYSCNT_RD,
+    FSL_IMX8MM_TCM_DTCM,
+    FSL_IMX8MM_TCM_ITCM,
+    FSL_IMX8MM_TZASC,
+    FSL_IMX8MM_UART1,
+    FSL_IMX8MM_UART2,
+    FSL_IMX8MM_UART3,
+    FSL_IMX8MM_UART4,
+    FSL_IMX8MM_USB1,
+    FSL_IMX8MM_USB2,
+    FSL_IMX8MM_USB1_OTG,
+    FSL_IMX8MM_USB2_OTG,
+    FSL_IMX8MM_USDHC1,
+    FSL_IMX8MM_USDHC2,
+    FSL_IMX8MM_USDHC3,
+    FSL_IMX8MM_VPU,
+    FSL_IMX8MM_VPU_BLK_CTRL,
+    FSL_IMX8MM_VPU_G1_DECODER,
+    FSL_IMX8MM_VPU_G2_DECODER,
+    FSL_IMX8MM_WDOG1,
+    FSL_IMX8MM_WDOG2,
+    FSL_IMX8MM_WDOG3,
+};
+
+enum FslImx8mmIrqs {
+    FSL_IMX8MM_UART1_IRQ    = 26,
+    FSL_IMX8MM_UART2_IRQ    = 27,
+    FSL_IMX8MM_UART3_IRQ    = 28,
+    FSL_IMX8MM_UART4_IRQ    = 29,
+};
+
+#endif /* FSL_IMX8MM_H */
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

Add configurable properties for register reset values that differ
between i.MX 8M variants (Plus, Mini, etc.). This allows the same
device implementation to be shared across multiple SoCs.

Properties added:
- arm-pll-fdiv-ctl0-reset: ARM PLL divider control reset value

Default value is set to match i.MX 8MP reset value (0x000FA031).
This can be overridden in the variant like iMX8MM with its own
reset value.

Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/misc/imx8mp_analog.c         | 12 +++++++++++-
 include/hw/misc/imx8mp_analog.h |  3 +++
 2 files changed, 14 insertions(+), 1 deletion(-)

diff --git a/hw/misc/imx8mp_analog.c b/hw/misc/imx8mp_analog.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/misc/imx8mp_analog.c
+++ b/hw/misc/imx8mp_analog.c
@@ -XXX,XX +XXX,XX @@
 #include "qemu/log.h"
 
 #include "hw/misc/imx8mp_analog.h"
+#include "hw/core/qdev-properties.h"
 #include "migration/vmstate.h"
 
 #define ANALOG_PLL_LOCK BIT(31)
@@ -XXX,XX +XXX,XX @@ static void imx8mp_analog_reset(DeviceState *dev)
     s->analog[ANALOG_VPU_PLL_LOCKD_CTRL] = 0x0010003f;
     s->analog[ANALOG_VPU_PLL_MNIT_CTRL] = 0x00280081;
     s->analog[ANALOG_ARM_PLL_GEN_CTRL] = 0x00000810;
-    s->analog[ANALOG_ARM_PLL_FDIV_CTL0] = 0x000fa031;
+
+    /* Use property value instead of hardcoded */
+    s->analog[ANALOG_ARM_PLL_FDIV_CTL0] = s->arm_pll_fdiv_ctl0_reset;
+
     s->analog[ANALOG_ARM_PLL_LOCKD_CTRL] = 0x0010003f;
     s->analog[ANALOG_ARM_PLL_MNIT_CTRL] = 0x00280081;
     s->analog[ANALOG_SYS_PLL1_GEN_CTRL] = 0x0aaaa810;
@@ -XXX,XX +XXX,XX @@ static const VMStateDescription imx8mp_analog_vmstate = {
     },
 };
 
+static const Property imx8mp_analog_properties[] = {
+    DEFINE_PROP_UINT32("arm-pll-fdiv-ctl0-reset", IMX8MPAnalogState,
+                       arm_pll_fdiv_ctl0_reset, 0x000fa031), /* imx8mp default */
+};
+
 static void imx8mp_analog_class_init(ObjectClass *klass, const void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
 
     device_class_set_legacy_reset(dc, imx8mp_analog_reset);
+    device_class_set_props(dc, imx8mp_analog_properties);
     dc->vmsd  = &imx8mp_analog_vmstate;
     dc->desc  = "i.MX 8M Plus Analog Module";
 }
diff --git a/include/hw/misc/imx8mp_analog.h b/include/hw/misc/imx8mp_analog.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/misc/imx8mp_analog.h
+++ b/include/hw/misc/imx8mp_analog.h
@@ -XXX,XX +XXX,XX @@ struct IMX8MPAnalogState {
     } mmio;
 
     uint32_t analog[ANALOG_MAX];
+
+    /* Property for variant-specific reset values */
+    uint32_t arm_pll_fdiv_ctl0_reset;
 };
 
 #endif /* IMX8MP_ANALOG_H */
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

Add the Analog IP to i.MX8MM SoC. iMX8MM and i.MX8MP uses
the same Analog IP so the analog ip source will be shared.

The ARM PLL divider control register (arm-pll-fdiv-ctl0) has
a different reset value on i.MX8MM (0x000fa030) compared to
i.MX8MP (0x000fa031). So iMX8MM will be overriding this property
with its own reset-value.

Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/Kconfig              |  1 +
 hw/arm/fsl-imx8mm.c         | 12 ++++++++++++
 include/hw/arm/fsl-imx8mm.h |  2 ++
 3 files changed, 15 insertions(+)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -XXX,XX +XXX,XX @@ config FSL_IMX8MP_EVK
 config FSL_IMX8MM
     bool
     select ARM_GIC
+    select FSL_IMX8MP_ANALOG
     select IMX
 
 config FSL_IMX8MM_EVK
diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx8mm.c
+++ b/hw/arm/fsl-imx8mm.c
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj)
 
     object_initialize_child(obj, "gic", &s->gic, gicv3_class_name());
 
+    object_initialize_child(obj, "analog", &s->analog, TYPE_IMX8MP_ANALOG);
+
     for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) {
         g_autofree char *name = g_strdup_printf("uart%d", i + 1);
         object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL);
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
         }
     }
 
+    /* Analog */
+    object_property_set_uint(OBJECT(&s->analog), "arm-pll-fdiv-ctl0-reset",
+                            0x000fa030, &error_abort);
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->analog), errp)) {
+        return;
+    }
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->analog), 0,
+                    fsl_imx8mm_memmap[FSL_IMX8MM_ANA_PLL].addr);
+
     /* UARTs */
     for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) {
         static const struct {
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
     /* Unimplemented devices */
     for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) {
         switch (i) {
+        case FSL_IMX8MM_ANA_PLL:
         case FSL_IMX8MM_GIC_DIST:
         case FSL_IMX8MM_GIC_REDIST:
         case FSL_IMX8MM_RAM:
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx8mm.h
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -XXX,XX +XXX,XX @@
 #include "cpu.h"
 #include "hw/char/imx_serial.h"
 #include "hw/intc/arm_gicv3_common.h"
+#include "hw/misc/imx8mp_analog.h"
 #include "qom/object.h"
 #include "qemu/units.h"
 
@@ -XXX,XX +XXX,XX @@ struct FslImx8mmState {
 
     ARMCPU             cpu[FSL_IMX8MM_NUM_CPUS];
     GICv3State         gic;
+    IMX8MPAnalogState  analog;
     IMXSerialState     uart[FSL_IMX8MM_NUM_UARTS];
     MemoryRegion ocram;
 };
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

Add the Clock Control Module (CCM) device to i.MX8MM SoC.
The CCM implementation is shared with i.MX8MP as the register
layout is identical between the two variants.Hence iMX8MM will
be using the source of iMX8MP CCM.

Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/Kconfig              |  1 +
 hw/arm/fsl-imx8mm.c         | 10 ++++++++++
 include/hw/arm/fsl-imx8mm.h |  2 ++
 3 files changed, 13 insertions(+)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM
     bool
     select ARM_GIC
     select FSL_IMX8MP_ANALOG
+    select FSL_IMX8MP_CCM
     select IMX
 
 config FSL_IMX8MM_EVK
diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx8mm.c
+++ b/hw/arm/fsl-imx8mm.c
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj)
 
     object_initialize_child(obj, "gic", &s->gic, gicv3_class_name());
 
+    object_initialize_child(obj, "ccm", &s->ccm, TYPE_IMX8MP_CCM);
+
     object_initialize_child(obj, "analog", &s->analog, TYPE_IMX8MP_ANALOG);
 
     for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) {
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
         }
     }
 
+    /* CCM */
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->ccm), errp)) {
+        return;
+    }
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->ccm), 0,
+                    fsl_imx8mm_memmap[FSL_IMX8MM_CCM].addr);
+
     /* Analog */
     object_property_set_uint(OBJECT(&s->analog), "arm-pll-fdiv-ctl0-reset",
                             0x000fa030, &error_abort);
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
     for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) {
         switch (i) {
         case FSL_IMX8MM_ANA_PLL:
+        case FSL_IMX8MM_CCM:
         case FSL_IMX8MM_GIC_DIST:
         case FSL_IMX8MM_GIC_REDIST:
         case FSL_IMX8MM_RAM:
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx8mm.h
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -XXX,XX +XXX,XX @@
 #include "hw/char/imx_serial.h"
 #include "hw/intc/arm_gicv3_common.h"
 #include "hw/misc/imx8mp_analog.h"
+#include "hw/misc/imx8mp_ccm.h"
 #include "qom/object.h"
 #include "qemu/units.h"
 
@@ -XXX,XX +XXX,XX @@ struct FslImx8mmState {
 
     ARMCPU             cpu[FSL_IMX8MM_NUM_CPUS];
     GICv3State         gic;
+    IMX8MPCCMState     ccm;
     IMX8MPAnalogState  analog;
     IMXSerialState     uart[FSL_IMX8MM_NUM_UARTS];
     MemoryRegion ocram;
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

SNVS contains an RTC which allows Linux to deal correctly with time

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

It enables emulation of SD/MMC cards through a virtual SDHCI interface
The emulated SDHCI controller allows guest OS to use emulated storage as
a standard block device.
This will allow running the images such as those generated
by Buildroot.

Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/Kconfig              |  1 +
 hw/arm/fsl-imx8mm.c         | 25 +++++++++++++++++++++++++
 hw/arm/imx8mm-evk.c         | 17 +++++++++++++++++
 include/hw/arm/fsl-imx8mm.h |  7 +++++++
 4 files changed, 50 insertions(+)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM
     select FSL_IMX8MP_ANALOG
     select FSL_IMX8MP_CCM
     select IMX
+    select SDHCI
 
 config FSL_IMX8MM_EVK
     bool
diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx8mm.c
+++ b/hw/arm/fsl-imx8mm.c
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj)
         object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL);
     }
 
+    for (i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) {
+        g_autofree char *name = g_strdup_printf("usdhc%d", i + 1);
+        object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC);
+    }
 }
 
 static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
                                 fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr,
                                 &s->ocram);
 
+    /* USDHCs */
+    for (i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) {
+        static const struct {
+            hwaddr addr;
+            unsigned int irq;
+        } usdhc_table[FSL_IMX8MM_NUM_USDHCS] = {
+            { fsl_imx8mm_memmap[FSL_IMX8MM_USDHC1].addr, FSL_IMX8MM_USDHC1_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_USDHC2].addr, FSL_IMX8MM_USDHC2_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_USDHC3].addr, FSL_IMX8MM_USDHC3_IRQ },
+        };
+
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->usdhc[i]), errp)) {
+            return;
+        }
+
+        sysbus_mmio_map(SYS_BUS_DEVICE(&s->usdhc[i]), 0, usdhc_table[i].addr);
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->usdhc[i]), 0,
+                           qdev_get_gpio_in(gicdev, usdhc_table[i].irq));
+    }
+
     /* SNVS */
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->snvs), errp)) {
         return;
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
         case FSL_IMX8MM_OCRAM:
         case FSL_IMX8MM_SNVS_HP:
         case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4:
+        case FSL_IMX8MM_USDHC1 ... FSL_IMX8MM_USDHC3:
             /* device implemented and treated above */
             break;
 
diff --git a/hw/arm/imx8mm-evk.c b/hw/arm/imx8mm-evk.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/imx8mm-evk.c
+++ b/hw/arm/imx8mm-evk.c
@@ -XXX,XX +XXX,XX @@ static void imx8mm_evk_init(MachineState *machine)
     memory_region_add_subregion(get_system_memory(), FSL_IMX8MM_RAM_START,
                                 machine->ram);
 
+    for (int i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) {
+        BusState *bus;
+        DeviceState *carddev;
+        BlockBackend *blk;
+        DriveInfo *di = drive_get(IF_SD, i, 0);
+
+        if (!di) {
+            continue;
+        }
+
+        blk = blk_by_legacy_dinfo(di);
+        bus = qdev_get_child_bus(DEVICE(&s->usdhc[i]), "sd-bus");
+        carddev = qdev_new(TYPE_SD_CARD);
+        qdev_prop_set_drive_err(carddev, "drive", blk, &error_fatal);
+        qdev_realize_and_unref(carddev, bus, &error_fatal);
+    }
+
     if (!qtest_enabled()) {
         arm_load_kernel(&s->cpu[0], machine, &boot_info);
     }
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx8mm.h
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -XXX,XX +XXX,XX @@
 #include "hw/misc/imx7_snvs.h"
 #include "hw/misc/imx8mp_analog.h"
 #include "hw/misc/imx8mp_ccm.h"
+#include "hw/sd/sdhci.h"
 #include "qom/object.h"
 #include "qemu/units.h"
 
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmConfiguration {
     FSL_IMX8MM_NUM_CPUS         = 4,
     FSL_IMX8MM_NUM_IRQS         = 128,
     FSL_IMX8MM_NUM_UARTS        = 4,
+    FSL_IMX8MM_NUM_USDHCS       = 3,
 };
 
 struct FslImx8mmState {
@@ -XXX,XX +XXX,XX @@ struct FslImx8mmState {
     IMX7SNVSState      snvs;
     IMXSerialState     uart[FSL_IMX8MM_NUM_UARTS];
     MemoryRegion ocram;
+    SDHCIState         usdhc[FSL_IMX8MM_NUM_USDHCS];
 };
 
 enum FslImx8mmMemoryRegions {
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmMemoryRegions {
 };
 
 enum FslImx8mmIrqs {
+    FSL_IMX8MM_USDHC1_IRQ   = 22,
+    FSL_IMX8MM_USDHC2_IRQ   = 23,
+    FSL_IMX8MM_USDHC3_IRQ   = 24,
+
     FSL_IMX8MM_UART1_IRQ    = 26,
     FSL_IMX8MM_UART2_IRQ    = 27,
     FSL_IMX8MM_UART3_IRQ    = 28,
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

This enables support for Designware PCI Express Controller emulation
It provides a controlled environment to debug the linux pci subsystem

Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/Kconfig              |  3 +++
 hw/arm/fsl-imx8mm.c         | 30 ++++++++++++++++++++++++++++++
 include/hw/arm/fsl-imx8mm.h | 10 ++++++++++
 3 files changed, 43 insertions(+)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -XXX,XX +XXX,XX @@ config FSL_IMX8MP_EVK
 
 config FSL_IMX8MM
     bool
+    imply PCI_DEVICES
     select ARM_GIC
     select FSL_IMX8MP_ANALOG
     select FSL_IMX8MP_CCM
     select IMX
     select SDHCI
+    select PCI_EXPRESS_DESIGNWARE
+    select PCI_EXPRESS_FSL_IMX8M_PHY
 
 config FSL_IMX8MM_EVK
     bool
diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx8mm.c
+++ b/hw/arm/fsl-imx8mm.c
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj)
         g_autofree char *name = g_strdup_printf("usdhc%d", i + 1);
         object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC);
     }
+
+    object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST);
+    object_initialize_child(obj, "pcie_phy", &s->pcie_phy,
+                            TYPE_FSL_IMX8M_PCIE_PHY);
 }
 
 static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
     sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0,
                     fsl_imx8mm_memmap[FSL_IMX8MM_SNVS_HP].addr);
 
+    /* PCIe */
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->pcie), errp)) {
+        return;
+    }
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->pcie), 0,
+                    fsl_imx8mm_memmap[FSL_IMX8MM_PCIE1].addr);
+
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 0,
+                       qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_INTA_IRQ));
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 1,
+                       qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_INTB_IRQ));
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 2,
+                       qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_INTC_IRQ));
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 3,
+                       qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_INTD_IRQ));
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 4,
+                       qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_MSI_IRQ));
+
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->pcie_phy), errp)) {
+        return;
+    }
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->pcie_phy), 0,
+                    fsl_imx8mm_memmap[FSL_IMX8MM_PCIE_PHY1].addr);
+
     /* Unimplemented devices */
     for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) {
         switch (i) {
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
         case FSL_IMX8MM_CCM:
         case FSL_IMX8MM_GIC_DIST:
         case FSL_IMX8MM_GIC_REDIST:
+        case FSL_IMX8MM_PCIE1:
+        case FSL_IMX8MM_PCIE_PHY1:
         case FSL_IMX8MM_RAM:
         case FSL_IMX8MM_OCRAM:
         case FSL_IMX8MM_SNVS_HP:
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx8mm.h
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -XXX,XX +XXX,XX @@
 #include "hw/misc/imx7_snvs.h"
 #include "hw/misc/imx8mp_analog.h"
 #include "hw/misc/imx8mp_ccm.h"
+#include "hw/pci-host/designware.h"
+#include "hw/pci-host/fsl_imx8m_phy.h"
 #include "hw/sd/sdhci.h"
 #include "qom/object.h"
 #include "qemu/units.h"
@@ -XXX,XX +XXX,XX @@ struct FslImx8mmState {
     IMXSerialState     uart[FSL_IMX8MM_NUM_UARTS];
     MemoryRegion ocram;
     SDHCIState         usdhc[FSL_IMX8MM_NUM_USDHCS];
+    DesignwarePCIEHost pcie;
+    FslImx8mPciePhyState   pcie_phy;
 };
 
 enum FslImx8mmMemoryRegions {
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs {
     FSL_IMX8MM_UART2_IRQ    = 27,
     FSL_IMX8MM_UART3_IRQ    = 28,
     FSL_IMX8MM_UART4_IRQ    = 29,
+
+    FSL_IMX8MM_PCI_INTA_IRQ = 122,
+    FSL_IMX8MM_PCI_INTB_IRQ = 123,
+    FSL_IMX8MM_PCI_INTC_IRQ = 124,
+    FSL_IMX8MM_PCI_INTD_IRQ = 125,
+    FSL_IMX8MM_PCI_MSI_IRQ  = 127,
 };
 
 #endif /* FSL_IMX8MM_H */
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

Enabled GPIO controller emulation
Also updated the GPIO IRQ lines of iMX8MM

Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/fsl-imx8mm.c         | 54 +++++++++++++++++++++++++++++++++++++
 include/hw/arm/fsl-imx8mm.h | 14 ++++++++++
 2 files changed, 68 insertions(+)

diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx8mm.c
+++ b/hw/arm/fsl-imx8mm.c
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj)
         object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL);
     }
 
+    for (i = 0; i < FSL_IMX8MM_NUM_GPIOS; i++) {
+        g_autofree char *name = g_strdup_printf("gpio%d", i + 1);
+        object_initialize_child(obj, name, &s->gpio[i], TYPE_IMX_GPIO);
+    }
+
     for (i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) {
         g_autofree char *name = g_strdup_printf("usdhc%d", i + 1);
         object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC);
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
                                 fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr,
                                 &s->ocram);
 
+    /* GPIOs */
+    for (i = 0; i < FSL_IMX8MM_NUM_GPIOS; i++) {
+        static const struct {
+            hwaddr addr;
+            unsigned int irq_low;
+            unsigned int irq_high;
+        } gpio_table[FSL_IMX8MM_NUM_GPIOS] = {
+            {
+                fsl_imx8mm_memmap[FSL_IMX8MM_GPIO1].addr,
+                FSL_IMX8MM_GPIO1_LOW_IRQ,
+                FSL_IMX8MM_GPIO1_HIGH_IRQ
+            },
+            {
+                fsl_imx8mm_memmap[FSL_IMX8MM_GPIO2].addr,
+                FSL_IMX8MM_GPIO2_LOW_IRQ,
+                FSL_IMX8MM_GPIO2_HIGH_IRQ
+            },
+            {
+                fsl_imx8mm_memmap[FSL_IMX8MM_GPIO3].addr,
+                FSL_IMX8MM_GPIO3_LOW_IRQ,
+                FSL_IMX8MM_GPIO3_HIGH_IRQ
+            },
+            {
+                fsl_imx8mm_memmap[FSL_IMX8MM_GPIO4].addr,
+                FSL_IMX8MM_GPIO4_LOW_IRQ,
+                FSL_IMX8MM_GPIO4_HIGH_IRQ
+            },
+            {
+                fsl_imx8mm_memmap[FSL_IMX8MM_GPIO5].addr,
+                FSL_IMX8MM_GPIO5_LOW_IRQ,
+                FSL_IMX8MM_GPIO5_HIGH_IRQ
+            },
+        };
+        object_property_set_bool(OBJECT(&s->gpio[i]), "has-edge-sel", true,
+                                 &error_abort);
+        object_property_set_bool(OBJECT(&s->gpio[i]), "has-upper-pin-irq",
+                                 true, &error_abort);
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpio[i]), errp)) {
+            return;
+        }
+
+        sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio[i]), 0, gpio_table[i].addr);
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 0,
+                           qdev_get_gpio_in(gicdev, gpio_table[i].irq_low));
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 1,
+                           qdev_get_gpio_in(gicdev, gpio_table[i].irq_high));
+    }
+
     /* USDHCs */
     for (i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) {
         static const struct {
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
         case FSL_IMX8MM_CCM:
         case FSL_IMX8MM_GIC_DIST:
         case FSL_IMX8MM_GIC_REDIST:
+        case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5:
         case FSL_IMX8MM_PCIE1:
         case FSL_IMX8MM_PCIE_PHY1:
         case FSL_IMX8MM_RAM:
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx8mm.h
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -XXX,XX +XXX,XX @@
 
 #include "cpu.h"
 #include "hw/char/imx_serial.h"
+#include "hw/gpio/imx_gpio.h"
 #include "hw/intc/arm_gicv3_common.h"
 #include "hw/misc/imx7_snvs.h"
 #include "hw/misc/imx8mp_analog.h"
@@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(FslImx8mmState, FSL_IMX8MM)
 
 enum FslImx8mmConfiguration {
     FSL_IMX8MM_NUM_CPUS         = 4,
+    FSL_IMX8MM_NUM_GPIOS        = 5,
     FSL_IMX8MM_NUM_IRQS         = 128,
     FSL_IMX8MM_NUM_UARTS        = 4,
     FSL_IMX8MM_NUM_USDHCS       = 3,
@@ -XXX,XX +XXX,XX @@ struct FslImx8mmState {
 
     ARMCPU             cpu[FSL_IMX8MM_NUM_CPUS];
     GICv3State         gic;
+    IMXGPIOState       gpio[FSL_IMX8MM_NUM_GPIOS];
     IMX8MPCCMState     ccm;
     IMX8MPAnalogState  analog;
     IMX7SNVSState      snvs;
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs {
     FSL_IMX8MM_UART3_IRQ    = 28,
     FSL_IMX8MM_UART4_IRQ    = 29,
 
+    FSL_IMX8MM_GPIO1_LOW_IRQ  = 64,
+    FSL_IMX8MM_GPIO1_HIGH_IRQ = 65,
+    FSL_IMX8MM_GPIO2_LOW_IRQ  = 66,
+    FSL_IMX8MM_GPIO2_HIGH_IRQ = 67,
+    FSL_IMX8MM_GPIO3_LOW_IRQ  = 68,
+    FSL_IMX8MM_GPIO3_HIGH_IRQ = 69,
+    FSL_IMX8MM_GPIO4_LOW_IRQ  = 70,
+    FSL_IMX8MM_GPIO4_HIGH_IRQ = 71,
+    FSL_IMX8MM_GPIO5_LOW_IRQ  = 72,
+    FSL_IMX8MM_GPIO5_HIGH_IRQ = 73,
+
     FSL_IMX8MM_PCI_INTA_IRQ = 122,
     FSL_IMX8MM_PCI_INTB_IRQ = 123,
     FSL_IMX8MM_PCI_INTC_IRQ = 124,
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

This can be used to test and debug I2C device drivers.
Added I2C interrupts

Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/Kconfig              |  2 ++
 hw/arm/fsl-imx8mm.c         | 27 +++++++++++++++++++++++++++
 include/hw/arm/fsl-imx8mm.h |  8 ++++++++
 3 files changed, 37 insertions(+)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -XXX,XX +XXX,XX @@ config FSL_IMX8MP_EVK
 config FSL_IMX8MM
     bool
     imply PCI_DEVICES
+    imply I2C_DEVICES
     select ARM_GIC
     select FSL_IMX8MP_ANALOG
     select FSL_IMX8MP_CCM
     select IMX
+    select IMX_I2C
     select SDHCI
     select PCI_EXPRESS_DESIGNWARE
     select PCI_EXPRESS_FSL_IMX8M_PHY
diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx8mm.c
+++ b/hw/arm/fsl-imx8mm.c
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj)
         object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL);
     }
 
+    for (i = 0; i < FSL_IMX8MM_NUM_I2CS; i++) {
+        g_autofree char *name = g_strdup_printf("i2c%d", i + 1);
+        object_initialize_child(obj, name, &s->i2c[i], TYPE_IMX_I2C);
+    }
+
     for (i = 0; i < FSL_IMX8MM_NUM_GPIOS; i++) {
         g_autofree char *name = g_strdup_printf("gpio%d", i + 1);
         object_initialize_child(obj, name, &s->gpio[i], TYPE_IMX_GPIO);
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
                                 fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr,
                                 &s->ocram);
 
+    /* I2Cs */
+    for (i = 0; i < FSL_IMX8MM_NUM_I2CS; i++) {
+        static const struct {
+            hwaddr addr;
+            unsigned int irq;
+        } i2c_table[FSL_IMX8MM_NUM_I2CS] = {
+            { fsl_imx8mm_memmap[FSL_IMX8MM_I2C1].addr, FSL_IMX8MM_I2C1_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_I2C2].addr, FSL_IMX8MM_I2C2_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_I2C3].addr, FSL_IMX8MM_I2C3_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_I2C4].addr, FSL_IMX8MM_I2C4_IRQ },
+        };
+
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->i2c[i]), errp)) {
+            return;
+        }
+
+        sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c[i]), 0, i2c_table[i].addr);
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c[i]), 0,
+                           qdev_get_gpio_in(gicdev, i2c_table[i].irq));
+    }
+
     /* GPIOs */
     for (i = 0; i < FSL_IMX8MM_NUM_GPIOS; i++) {
         static const struct {
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
         case FSL_IMX8MM_GIC_DIST:
         case FSL_IMX8MM_GIC_REDIST:
         case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5:
+        case FSL_IMX8MM_I2C1 ... FSL_IMX8MM_I2C4:
         case FSL_IMX8MM_PCIE1:
         case FSL_IMX8MM_PCIE_PHY1:
         case FSL_IMX8MM_RAM:
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx8mm.h
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -XXX,XX +XXX,XX @@
 #include "cpu.h"
 #include "hw/char/imx_serial.h"
 #include "hw/gpio/imx_gpio.h"
+#include "hw/i2c/imx_i2c.h"
 #include "hw/intc/arm_gicv3_common.h"
 #include "hw/misc/imx7_snvs.h"
 #include "hw/misc/imx8mp_analog.h"
@@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(FslImx8mmState, FSL_IMX8MM)
 enum FslImx8mmConfiguration {
     FSL_IMX8MM_NUM_CPUS         = 4,
     FSL_IMX8MM_NUM_GPIOS        = 5,
+    FSL_IMX8MM_NUM_I2CS         = 4,
     FSL_IMX8MM_NUM_IRQS         = 128,
     FSL_IMX8MM_NUM_UARTS        = 4,
     FSL_IMX8MM_NUM_USDHCS       = 3,
@@ -XXX,XX +XXX,XX @@ struct FslImx8mmState {
     IMX8MPCCMState     ccm;
     IMX8MPAnalogState  analog;
     IMX7SNVSState      snvs;
+    IMXI2CState        i2c[FSL_IMX8MM_NUM_I2CS];
     IMXSerialState     uart[FSL_IMX8MM_NUM_UARTS];
     MemoryRegion ocram;
     SDHCIState         usdhc[FSL_IMX8MM_NUM_USDHCS];
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs {
     FSL_IMX8MM_UART3_IRQ    = 28,
     FSL_IMX8MM_UART4_IRQ    = 29,
 
+    FSL_IMX8MM_I2C1_IRQ     = 35,
+    FSL_IMX8MM_I2C2_IRQ     = 36,
+    FSL_IMX8MM_I2C3_IRQ     = 37,
+    FSL_IMX8MM_I2C4_IRQ     = 38,
+
     FSL_IMX8MM_GPIO1_LOW_IRQ  = 64,
     FSL_IMX8MM_GPIO1_HIGH_IRQ = 65,
     FSL_IMX8MM_GPIO2_LOW_IRQ  = 66,
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

It enables emulation of ECSPI in iMX8MM
Added SPI IRQ lines

Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/fsl-imx8mm.c         | 26 ++++++++++++++++++++++++++
 include/hw/arm/fsl-imx8mm.h |  7 +++++++
 2 files changed, 33 insertions(+)

diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx8mm.c
+++ b/hw/arm/fsl-imx8mm.c
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj)
         object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC);
     }
 
+    for (i = 0; i < FSL_IMX8MM_NUM_ECSPIS; i++) {
+        g_autofree char *name = g_strdup_printf("spi%d", i + 1);
+        object_initialize_child(obj, name, &s->spi[i], TYPE_IMX_SPI);
+    }
+
     object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST);
     object_initialize_child(obj, "pcie_phy", &s->pcie_phy,
                             TYPE_FSL_IMX8M_PCIE_PHY);
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
                            qdev_get_gpio_in(gicdev, usdhc_table[i].irq));
     }
 
+    /* ECSPIs */
+    for (i = 0; i < FSL_IMX8MM_NUM_ECSPIS; i++) {
+        static const struct {
+            hwaddr addr;
+            unsigned int irq;
+        } spi_table[FSL_IMX8MM_NUM_ECSPIS] = {
+            { fsl_imx8mm_memmap[FSL_IMX8MM_ECSPI1].addr, FSL_IMX8MM_ECSPI1_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_ECSPI2].addr, FSL_IMX8MM_ECSPI2_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_ECSPI3].addr, FSL_IMX8MM_ECSPI3_IRQ },
+        };
+
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->spi[i]), errp)) {
+            return;
+        }
+
+        sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0, spi_table[i].addr);
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0,
+                           qdev_get_gpio_in(gicdev, spi_table[i].irq));
+    }
+
     /* SNVS */
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->snvs), errp)) {
         return;
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
         case FSL_IMX8MM_GIC_DIST:
         case FSL_IMX8MM_GIC_REDIST:
         case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5:
+        case FSL_IMX8MM_ECSPI1 ... FSL_IMX8MM_ECSPI3:
         case FSL_IMX8MM_I2C1 ... FSL_IMX8MM_I2C4:
         case FSL_IMX8MM_PCIE1:
         case FSL_IMX8MM_PCIE_PHY1:
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx8mm.h
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -XXX,XX +XXX,XX @@
 #include "hw/pci-host/designware.h"
 #include "hw/pci-host/fsl_imx8m_phy.h"
 #include "hw/sd/sdhci.h"
+#include "hw/ssi/imx_spi.h"
 #include "qom/object.h"
 #include "qemu/units.h"
 
@@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(FslImx8mmState, FSL_IMX8MM)
 
 enum FslImx8mmConfiguration {
     FSL_IMX8MM_NUM_CPUS         = 4,
+    FSL_IMX8MM_NUM_ECSPIS       = 3,
     FSL_IMX8MM_NUM_GPIOS        = 5,
     FSL_IMX8MM_NUM_I2CS         = 4,
     FSL_IMX8MM_NUM_IRQS         = 128,
@@ -XXX,XX +XXX,XX @@ struct FslImx8mmState {
     IMX8MPCCMState     ccm;
     IMX8MPAnalogState  analog;
     IMX7SNVSState      snvs;
+    IMXSPIState        spi[FSL_IMX8MM_NUM_ECSPIS];
     IMXI2CState        i2c[FSL_IMX8MM_NUM_I2CS];
     IMXSerialState     uart[FSL_IMX8MM_NUM_UARTS];
     MemoryRegion ocram;
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs {
     FSL_IMX8MM_UART3_IRQ    = 28,
     FSL_IMX8MM_UART4_IRQ    = 29,
 
+    FSL_IMX8MM_ECSPI1_IRQ   = 31,
+    FSL_IMX8MM_ECSPI2_IRQ   = 32,
+    FSL_IMX8MM_ECSPI3_IRQ   = 33,
+
     FSL_IMX8MM_I2C1_IRQ     = 35,
     FSL_IMX8MM_I2C2_IRQ     = 36,
     FSL_IMX8MM_I2C3_IRQ     = 37,
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

It enables emulation of WDT in iMX8MM
Added WDT IRQ lines

Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/Kconfig              |  1 +
 hw/arm/fsl-imx8mm.c         | 28 ++++++++++++++++++++++++++++
 include/hw/arm/fsl-imx8mm.h |  7 +++++++
 3 files changed, 36 insertions(+)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM
     select SDHCI
     select PCI_EXPRESS_DESIGNWARE
     select PCI_EXPRESS_FSL_IMX8M_PHY
+    select WDT_IMX2
 
 config FSL_IMX8MM_EVK
     bool
diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx8mm.c
+++ b/hw/arm/fsl-imx8mm.c
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj)
         object_initialize_child(obj, name, &s->spi[i], TYPE_IMX_SPI);
     }
 
+    for (i = 0; i < FSL_IMX8MM_NUM_WDTS; i++) {
+        g_autofree char *name = g_strdup_printf("wdt%d", i);
+        object_initialize_child(obj, name, &s->wdt[i], TYPE_IMX2_WDT);
+    }
+
     object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST);
     object_initialize_child(obj, "pcie_phy", &s->pcie_phy,
                             TYPE_FSL_IMX8M_PCIE_PHY);
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
     sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0,
                     fsl_imx8mm_memmap[FSL_IMX8MM_SNVS_HP].addr);
 
+    /* Watchdogs */
+    for (i = 0; i < FSL_IMX8MM_NUM_WDTS; i++) {
+        static const struct {
+            hwaddr addr;
+            unsigned int irq;
+        } wdog_table[FSL_IMX8MM_NUM_WDTS] = {
+            { fsl_imx8mm_memmap[FSL_IMX8MM_WDOG1].addr, FSL_IMX8MM_WDOG1_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_WDOG2].addr, FSL_IMX8MM_WDOG2_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_WDOG3].addr, FSL_IMX8MM_WDOG3_IRQ },
+        };
+
+        object_property_set_bool(OBJECT(&s->wdt[i]), "pretimeout-support",
+                                 true, &error_abort);
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->wdt[i]), errp)) {
+            return;
+        }
+
+        sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[i]), 0, wdog_table[i].addr);
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->wdt[i]), 0,
+                           qdev_get_gpio_in(gicdev, wdog_table[i].irq));
+    }
+
     /* PCIe */
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->pcie), errp)) {
         return;
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
         case FSL_IMX8MM_SNVS_HP:
         case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4:
         case FSL_IMX8MM_USDHC1 ... FSL_IMX8MM_USDHC3:
+        case FSL_IMX8MM_WDOG1 ... FSL_IMX8MM_WDOG3:
             /* device implemented and treated above */
             break;
 
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx8mm.h
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -XXX,XX +XXX,XX @@
 #include "hw/pci-host/fsl_imx8m_phy.h"
 #include "hw/sd/sdhci.h"
 #include "hw/ssi/imx_spi.h"
+#include "hw/watchdog/wdt_imx2.h"
 #include "qom/object.h"
 #include "qemu/units.h"
 
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmConfiguration {
     FSL_IMX8MM_NUM_IRQS         = 128,
     FSL_IMX8MM_NUM_UARTS        = 4,
     FSL_IMX8MM_NUM_USDHCS       = 3,
+    FSL_IMX8MM_NUM_WDTS         = 3,
 };
 
 struct FslImx8mmState {
@@ -XXX,XX +XXX,XX @@ struct FslImx8mmState {
     IMXSerialState     uart[FSL_IMX8MM_NUM_UARTS];
     MemoryRegion ocram;
     SDHCIState         usdhc[FSL_IMX8MM_NUM_USDHCS];
+    IMX2WdtState       wdt[FSL_IMX8MM_NUM_WDTS];
     DesignwarePCIEHost pcie;
     FslImx8mPciePhyState   pcie_phy;
 };
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs {
     FSL_IMX8MM_GPIO5_LOW_IRQ  = 72,
     FSL_IMX8MM_GPIO5_HIGH_IRQ = 73,
 
+    FSL_IMX8MM_WDOG1_IRQ    = 78,
+    FSL_IMX8MM_WDOG2_IRQ    = 79,
+    FSL_IMX8MM_WDOG3_IRQ    = 10,
+
     FSL_IMX8MM_PCI_INTA_IRQ = 122,
     FSL_IMX8MM_PCI_INTB_IRQ = 123,
     FSL_IMX8MM_PCI_INTC_IRQ = 124,
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

It enables emulation of GPT in iMX8MM
Added GPT IRQ lines

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/Kconfig              |  1 +
 hw/arm/fsl-imx8mm.c         | 54 +++++++++++++++++++++++++++++++++++++
 hw/timer/imx_gpt.c          | 26 ++++++++++++++++++
 include/hw/arm/fsl-imx8mm.h | 11 ++++++++
 include/hw/timer/imx_gpt.h  |  2 ++
 5 files changed, 94 insertions(+)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM
     select FSL_IMX8MP_CCM
     select IMX
     select IMX_I2C
+    select OR_IRQ
     select SDHCI
     select PCI_EXPRESS_DESIGNWARE
     select PCI_EXPRESS_FSL_IMX8M_PHY
diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx8mm.c
+++ b/hw/arm/fsl-imx8mm.c
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj)
         object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL);
     }
 
+    for (i = 0; i < FSL_IMX8MM_NUM_GPTS; i++) {
+        g_autofree char *name = g_strdup_printf("gpt%d", i + 1);
+        object_initialize_child(obj, name, &s->gpt[i], TYPE_IMX8MM_GPT);
+    }
+    object_initialize_child(obj, "gpt5-gpt6-irq", &s->gpt5_gpt6_irq,
+                            TYPE_OR_IRQ);
+
     for (i = 0; i < FSL_IMX8MM_NUM_I2CS; i++) {
         g_autofree char *name = g_strdup_printf("i2c%d", i + 1);
         object_initialize_child(obj, name, &s->i2c[i], TYPE_IMX_I2C);
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
                                 fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr,
                                 &s->ocram);
 
+    /* GPTs */
+    object_property_set_int(OBJECT(&s->gpt5_gpt6_irq), "num-lines", 2,
+                            &error_abort);
+    if (!qdev_realize(DEVICE(&s->gpt5_gpt6_irq), NULL, errp)) {
+        return;
+    }
+
+    qdev_connect_gpio_out(DEVICE(&s->gpt5_gpt6_irq), 0,
+                          qdev_get_gpio_in(gicdev, FSL_IMX8MM_GPT5_GPT6_IRQ));
+
+    for (i = 0; i < FSL_IMX8MM_NUM_GPTS; i++) {
+        hwaddr gpt_addrs[FSL_IMX8MM_NUM_GPTS] = {
+            fsl_imx8mm_memmap[FSL_IMX8MM_GPT1].addr,
+            fsl_imx8mm_memmap[FSL_IMX8MM_GPT2].addr,
+            fsl_imx8mm_memmap[FSL_IMX8MM_GPT3].addr,
+            fsl_imx8mm_memmap[FSL_IMX8MM_GPT4].addr,
+            fsl_imx8mm_memmap[FSL_IMX8MM_GPT5].addr,
+            fsl_imx8mm_memmap[FSL_IMX8MM_GPT6].addr,
+        };
+
+        s->gpt[i].ccm = IMX_CCM(&s->ccm);
+
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpt[i]), errp)) {
+            return;
+        }
+
+        sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpt[i]), 0, gpt_addrs[i]);
+
+        if (i < FSL_IMX8MM_NUM_GPTS - 2) {
+            static const unsigned int gpt_irqs[FSL_IMX8MM_NUM_GPTS - 2] = {
+                FSL_IMX8MM_GPT1_IRQ,
+                FSL_IMX8MM_GPT2_IRQ,
+                FSL_IMX8MM_GPT3_IRQ,
+                FSL_IMX8MM_GPT4_IRQ,
+            };
+
+            sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpt[i]), 0,
+                               qdev_get_gpio_in(gicdev, gpt_irqs[i]));
+        } else {
+            int irq = i - FSL_IMX8MM_NUM_GPTS + 2;
+
+            sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpt[i]), 0,
+                               qdev_get_gpio_in(DEVICE(&s->gpt5_gpt6_irq), irq));
+        }
+    }
+
     /* I2Cs */
     for (i = 0; i < FSL_IMX8MM_NUM_I2CS; i++) {
         static const struct {
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
         case FSL_IMX8MM_GIC_DIST:
         case FSL_IMX8MM_GIC_REDIST:
         case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5:
+        case FSL_IMX8MM_GPT1 ... FSL_IMX8MM_GPT6:
         case FSL_IMX8MM_ECSPI1 ... FSL_IMX8MM_ECSPI3:
         case FSL_IMX8MM_I2C1 ... FSL_IMX8MM_I2C4:
         case FSL_IMX8MM_PCIE1:
diff --git a/hw/timer/imx_gpt.c b/hw/timer/imx_gpt.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/timer/imx_gpt.c
+++ b/hw/timer/imx_gpt.c
@@ -XXX,XX +XXX,XX @@
  * Originally written by Hans Jiang
  * Updated by Peter Chubb
  * Updated by Jean-Christophe Dubois <jcd@tribudubois.net>
+ * Updated by Gaurav Sharma <gaurav.sharma_7@nxp.com>
  *
  * This code is licensed under GPL version 2 or later.  See
  * the COPYING file in the top-level directory.
@@ -XXX,XX +XXX,XX @@ static const IMXClk imx8mp_gpt_clocks[] = {
     CLK_NONE,      /* 111 not defined */
 };
 
+static const IMXClk imx8mm_gpt_clocks[] = {
+    CLK_NONE,      /* 000 No clock source */
+    CLK_IPG,       /* 001 ipg_clk, 532MHz */
+    CLK_IPG_HIGH,  /* 010 ipg_clk_highfreq */
+    CLK_EXT,       /* 011 External clock */
+    CLK_32k,       /* 100 ipg_clk_32k */
+    CLK_HIGH,      /* 101 ipg_clk_16M */
+    CLK_NONE,      /* 110 not defined */
+    CLK_NONE,      /* 111 not defined */
+};
+
 /* Must be called from within ptimer_transaction_begin/commit block */
 static void imx_gpt_set_freq(IMXGPTState *s)
 {
@@ -XXX,XX +XXX,XX @@ static void imx8mp_gpt_init(Object *obj)
     s->clocks = imx8mp_gpt_clocks;
 }
 
+static void imx8mm_gpt_init(Object *obj)
+{
+    IMXGPTState *s = IMX_GPT(obj);
+
+    s->clocks = imx8mm_gpt_clocks;
+}
+
 static const TypeInfo imx25_gpt_info = {
     .name = TYPE_IMX25_GPT,
     .parent = TYPE_SYS_BUS_DEVICE,
@@ -XXX,XX +XXX,XX @@ static const TypeInfo imx8mp_gpt_info = {
     .instance_init = imx8mp_gpt_init,
 };
 
+static const TypeInfo imx8mm_gpt_info = {
+    .name = TYPE_IMX8MM_GPT,
+    .parent = TYPE_IMX25_GPT,
+    .instance_init = imx8mm_gpt_init,
+};
+
 static void imx_gpt_register_types(void)
 {
     type_register_static(&imx25_gpt_info);
@@ -XXX,XX +XXX,XX @@ static void imx_gpt_register_types(void)
     type_register_static(&imx6ul_gpt_info);
     type_register_static(&imx7_gpt_info);
     type_register_static(&imx8mp_gpt_info);
+    type_register_static(&imx8mm_gpt_info);
 }
 
 type_init(imx_gpt_register_types)
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx8mm.h
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -XXX,XX +XXX,XX @@
 #include "hw/misc/imx7_snvs.h"
 #include "hw/misc/imx8mp_analog.h"
 #include "hw/misc/imx8mp_ccm.h"
+#include "hw/or-irq.h"
 #include "hw/pci-host/designware.h"
 #include "hw/pci-host/fsl_imx8m_phy.h"
 #include "hw/sd/sdhci.h"
 #include "hw/ssi/imx_spi.h"
+#include "hw/timer/imx_gpt.h"
 #include "hw/watchdog/wdt_imx2.h"
 #include "qom/object.h"
 #include "qemu/units.h"
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmConfiguration {
     FSL_IMX8MM_NUM_CPUS         = 4,
     FSL_IMX8MM_NUM_ECSPIS       = 3,
     FSL_IMX8MM_NUM_GPIOS        = 5,
+    FSL_IMX8MM_NUM_GPTS         = 6,
     FSL_IMX8MM_NUM_I2CS         = 4,
     FSL_IMX8MM_NUM_IRQS         = 128,
     FSL_IMX8MM_NUM_UARTS        = 4,
@@ -XXX,XX +XXX,XX @@ struct FslImx8mmState {
 
     ARMCPU             cpu[FSL_IMX8MM_NUM_CPUS];
     GICv3State         gic;
+    IMXGPTState        gpt[FSL_IMX8MM_NUM_GPTS];
     IMXGPIOState       gpio[FSL_IMX8MM_NUM_GPIOS];
     IMX8MPCCMState     ccm;
     IMX8MPAnalogState  analog;
@@ -XXX,XX +XXX,XX @@ struct FslImx8mmState {
     IMX2WdtState       wdt[FSL_IMX8MM_NUM_WDTS];
     DesignwarePCIEHost pcie;
     FslImx8mPciePhyState   pcie_phy;
+    OrIRQState         gpt5_gpt6_irq;
 };
 
 enum FslImx8mmMemoryRegions {
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs {
     FSL_IMX8MM_I2C3_IRQ     = 37,
     FSL_IMX8MM_I2C4_IRQ     = 38,
 
+    FSL_IMX8MM_GPT1_IRQ      = 55,
+    FSL_IMX8MM_GPT2_IRQ      = 54,
+    FSL_IMX8MM_GPT3_IRQ      = 53,
+    FSL_IMX8MM_GPT4_IRQ      = 52,
+    FSL_IMX8MM_GPT5_GPT6_IRQ = 51,
+
     FSL_IMX8MM_GPIO1_LOW_IRQ  = 64,
     FSL_IMX8MM_GPIO1_HIGH_IRQ = 65,
     FSL_IMX8MM_GPIO2_LOW_IRQ  = 66,
diff --git a/include/hw/timer/imx_gpt.h b/include/hw/timer/imx_gpt.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/timer/imx_gpt.h
+++ b/include/hw/timer/imx_gpt.h
@@ -XXX,XX +XXX,XX @@
  * Originally written by Hans Jiang
  * Updated by Peter Chubb
  * Updated by Jean-Christophe Dubois <jcd@tribudubois.net>
+ * Updated by Gaurav Sharma <gaurav.sharma_7@nxp.com>
  *
  * Permission is hereby granted, free of charge, to any person obtaining a copy
  * of this software and associated documentation files (the "Software"), to deal
@@ -XXX,XX +XXX,XX @@
 #define TYPE_IMX6UL_GPT "imx6ul.gpt"
 #define TYPE_IMX7_GPT "imx7.gpt"
 #define TYPE_IMX8MP_GPT "imx8mp.gpt"
+#define TYPE_IMX8MM_GPT "imx8mm.gpt"
 
 #define TYPE_IMX_GPT TYPE_IMX25_GPT
 
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

It enables emulation of ENET ethernet controller in iMX8MM
Enables testing and debugging of network dependent drivers
Added ENET MAC IRQ lines

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/Kconfig              |  1 +
 hw/arm/fsl-imx8mm.c         | 24 ++++++++++++++++++++++++
 hw/arm/imx8mm-evk.c         |  1 +
 include/hw/arm/fsl-imx8mm.h | 10 +++++++++-
 4 files changed, 35 insertions(+), 1 deletion(-)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM
     select FSL_IMX8MP_ANALOG
     select FSL_IMX8MP_CCM
     select IMX
+    select IMX_FEC
     select IMX_I2C
     select OR_IRQ
     select SDHCI
diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx8mm.c
+++ b/hw/arm/fsl-imx8mm.c
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj)
         object_initialize_child(obj, name, &s->wdt[i], TYPE_IMX2_WDT);
     }
 
+    object_initialize_child(obj, "eth0", &s->enet, TYPE_IMX_ENET);
+
     object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST);
     object_initialize_child(obj, "pcie_phy", &s->pcie_phy,
                             TYPE_FSL_IMX8M_PCIE_PHY);
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
                            qdev_get_gpio_in(gicdev, spi_table[i].irq));
     }
 
+    /* ENET1 */
+    object_property_set_uint(OBJECT(&s->enet), "phy-num", s->phy_num,
+                             &error_abort);
+    object_property_set_uint(OBJECT(&s->enet), "tx-ring-num", 3, &error_abort);
+    qemu_configure_nic_device(DEVICE(&s->enet), true, NULL);
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->enet), errp)) {
+        return;
+    }
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->enet), 0,
+                    fsl_imx8mm_memmap[FSL_IMX8MM_ENET1].addr);
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->enet), 0,
+                       qdev_get_gpio_in(gicdev, FSL_IMX8MM_ENET1_MAC_IRQ));
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->enet), 1,
+                       qdev_get_gpio_in(gicdev, FSL_IMX6_ENET1_MAC_1588_IRQ));
+
     /* SNVS */
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->snvs), errp)) {
         return;
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
         case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5:
         case FSL_IMX8MM_GPT1 ... FSL_IMX8MM_GPT6:
         case FSL_IMX8MM_ECSPI1 ... FSL_IMX8MM_ECSPI3:
+        case FSL_IMX8MM_ENET1:
         case FSL_IMX8MM_I2C1 ... FSL_IMX8MM_I2C4:
         case FSL_IMX8MM_PCIE1:
         case FSL_IMX8MM_PCIE_PHY1:
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
     }
 }
 
+static const Property fsl_imx8mm_properties[] = {
+    DEFINE_PROP_UINT32("fec1-phy-num", FslImx8mmState, phy_num, 0),
+    DEFINE_PROP_BOOL("fec1-phy-connected", FslImx8mmState, phy_connected, true),
+};
+
 static void fsl_imx8mm_class_init(ObjectClass *oc, const void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(oc);
 
+    device_class_set_props(dc, fsl_imx8mm_properties);
     dc->realize = fsl_imx8mm_realize;
 
     dc->desc = "i.MX 8MM SoC";
diff --git a/hw/arm/imx8mm-evk.c b/hw/arm/imx8mm-evk.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/imx8mm-evk.c
+++ b/hw/arm/imx8mm-evk.c
@@ -XXX,XX +XXX,XX @@ static void imx8mm_evk_init(MachineState *machine)
 
     s = FSL_IMX8MM(object_new_with_props(TYPE_FSL_IMX8MM, OBJECT(machine),
                                          "soc", &error_fatal, NULL));
+    object_property_set_uint(OBJECT(s), "fec1-phy-num", 1, &error_fatal);
     sysbus_realize_and_unref(SYS_BUS_DEVICE(s), &error_fatal);
 
     memory_region_add_subregion(get_system_memory(), FSL_IMX8MM_RAM_START,
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx8mm.h
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -XXX,XX +XXX,XX @@
 #include "hw/misc/imx7_snvs.h"
 #include "hw/misc/imx8mp_analog.h"
 #include "hw/misc/imx8mp_ccm.h"
-#include "hw/or-irq.h"
+#include "hw/net/imx_fec.h"
+#include "hw/core/or-irq.h"
 #include "hw/pci-host/designware.h"
 #include "hw/pci-host/fsl_imx8m_phy.h"
 #include "hw/sd/sdhci.h"
@@ -XXX,XX +XXX,XX @@ struct FslImx8mmState {
     IMXI2CState        i2c[FSL_IMX8MM_NUM_I2CS];
     IMXSerialState     uart[FSL_IMX8MM_NUM_UARTS];
     MemoryRegion ocram;
+    IMXFECState        enet;
     SDHCIState         usdhc[FSL_IMX8MM_NUM_USDHCS];
     IMX2WdtState       wdt[FSL_IMX8MM_NUM_WDTS];
     DesignwarePCIEHost pcie;
     FslImx8mPciePhyState   pcie_phy;
     OrIRQState         gpt5_gpt6_irq;
+
+    uint32_t           phy_num;
+    bool               phy_connected;
 };
 
 enum FslImx8mmMemoryRegions {
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs {
     FSL_IMX8MM_WDOG2_IRQ    = 79,
     FSL_IMX8MM_WDOG3_IRQ    = 10,
 
+    FSL_IMX8MM_ENET1_MAC_IRQ    = 118,
+    FSL_IMX6_ENET1_MAC_1588_IRQ = 121,
+
     FSL_IMX8MM_PCI_INTA_IRQ = 122,
     FSL_IMX8MM_PCI_INTB_IRQ = 123,
     FSL_IMX8MM_PCI_INTC_IRQ = 124,
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

It enables emulation of USB on iMX8MM
Enables testing and debugging of USB drivers

Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/Kconfig              |  1 +
 hw/arm/fsl-imx8mm.c         | 27 +++++++++++++++++++++++++++
 include/hw/arm/fsl-imx8mm.h |  6 ++++++
 3 files changed, 34 insertions(+)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM
     select SDHCI
     select PCI_EXPRESS_DESIGNWARE
     select PCI_EXPRESS_FSL_IMX8M_PHY
+    select USB_DWC3
     select WDT_IMX2
 
 config FSL_IMX8MM_EVK
diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx8mm.c
+++ b/hw/arm/fsl-imx8mm.c
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj)
         object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC);
     }
 
+    for (i = 0; i < FSL_IMX8MM_NUM_USBS; i++) {
+        g_autofree char *name = g_strdup_printf("usb%d", i);
+        object_initialize_child(obj, name, &s->usb[i], TYPE_USB_DWC3);
+    }
+
     for (i = 0; i < FSL_IMX8MM_NUM_ECSPIS; i++) {
         g_autofree char *name = g_strdup_printf("spi%d", i + 1);
         object_initialize_child(obj, name, &s->spi[i], TYPE_IMX_SPI);
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
                            qdev_get_gpio_in(gicdev, usdhc_table[i].irq));
     }
 
+    /* USBs */
+    for (i = 0; i < FSL_IMX8MM_NUM_USBS; i++) {
+        static const struct {
+            hwaddr addr;
+            unsigned int irq;
+        } usb_table[FSL_IMX8MM_NUM_USBS] = {
+            { fsl_imx8mm_memmap[FSL_IMX8MM_USB1].addr, FSL_IMX8MM_USB1_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_USB2].addr, FSL_IMX8MM_USB2_IRQ },
+        };
+
+        qdev_prop_set_uint32(DEVICE(&s->usb[i].sysbus_xhci), "p2", 1);
+        qdev_prop_set_uint32(DEVICE(&s->usb[i].sysbus_xhci), "p3", 1);
+        qdev_prop_set_uint32(DEVICE(&s->usb[i].sysbus_xhci), "slots", 2);
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->usb[i]), errp)) {
+            return;
+        }
+        sysbus_mmio_map(SYS_BUS_DEVICE(&s->usb[i]), 0, usb_table[i].addr);
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->usb[i].sysbus_xhci), 0,
+                           qdev_get_gpio_in(gicdev, usb_table[i].irq));
+    }
+
     /* ECSPIs */
     for (i = 0; i < FSL_IMX8MM_NUM_ECSPIS; i++) {
         static const struct {
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
         case FSL_IMX8MM_OCRAM:
         case FSL_IMX8MM_SNVS_HP:
         case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4:
+        case FSL_IMX8MM_USB1 ... FSL_IMX8MM_USB2:
         case FSL_IMX8MM_USDHC1 ... FSL_IMX8MM_USDHC3:
         case FSL_IMX8MM_WDOG1 ... FSL_IMX8MM_WDOG3:
             /* device implemented and treated above */
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx8mm.h
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -XXX,XX +XXX,XX @@
 #include "hw/sd/sdhci.h"
 #include "hw/ssi/imx_spi.h"
 #include "hw/timer/imx_gpt.h"
+#include "hw/usb/hcd-dwc3.h"
 #include "hw/watchdog/wdt_imx2.h"
 #include "qom/object.h"
 #include "qemu/units.h"
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmConfiguration {
     FSL_IMX8MM_NUM_I2CS         = 4,
     FSL_IMX8MM_NUM_IRQS         = 128,
     FSL_IMX8MM_NUM_UARTS        = 4,
+    FSL_IMX8MM_NUM_USBS         = 2,
     FSL_IMX8MM_NUM_USDHCS       = 3,
     FSL_IMX8MM_NUM_WDTS         = 3,
 };
@@ -XXX,XX +XXX,XX @@ struct FslImx8mmState {
     IMXFECState        enet;
     SDHCIState         usdhc[FSL_IMX8MM_NUM_USDHCS];
     IMX2WdtState       wdt[FSL_IMX8MM_NUM_WDTS];
+    USBDWC3            usb[FSL_IMX8MM_NUM_USBS];
     DesignwarePCIEHost pcie;
     FslImx8mPciePhyState   pcie_phy;
     OrIRQState         gpt5_gpt6_irq;
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs {
     FSL_IMX8MM_I2C3_IRQ     = 37,
     FSL_IMX8MM_I2C4_IRQ     = 38,
 
+    FSL_IMX8MM_USB1_IRQ     = 40,
+    FSL_IMX8MM_USB2_IRQ     = 41,
+
     FSL_IMX8MM_GPT1_IRQ      = 55,
     FSL_IMX8MM_GPT2_IRQ      = 54,
     FSL_IMX8MM_GPT3_IRQ      = 53,
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

Added script that would validate the iMX8MM emulation by checking the
linux console log. If it succeeds, it will return:-

ok 1 test_imx8mm_evk.Imx8mmEvkMachine.test_aarch64_imx8mm_evk_usdhc

Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
[PMM: Add missing blank lines that flake8 wants]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 MAINTAINERS                                 |  1 +
 tests/functional/aarch64/meson.build        |  2 +
 tests/functional/aarch64/test_imx8mm_evk.py | 69 +++++++++++++++++++++
 3 files changed, 72 insertions(+)
 create mode 100755 tests/functional/aarch64/test_imx8mm_evk.py

diff --git a/MAINTAINERS b/MAINTAINERS
index XXXXXXX..XXXXXXX 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -XXX,XX +XXX,XX @@ F: hw/arm/fsl-imx8mm.c
 F: hw/arm/imx8mm-evk.c
 F: include/hw/arm/fsl-imx8mm.h
 F: docs/system/arm/imx8m.rst
+F: tests/functional/aarch64/test_imx8mm_evk.py
 
 MCIMX8MP-EVK / i.MX8MP
 M: Bernhard Beschow <shentey@gmail.com>
diff --git a/tests/functional/aarch64/meson.build b/tests/functional/aarch64/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/tests/functional/aarch64/meson.build
+++ b/tests/functional/aarch64/meson.build
@@ -XXX,XX +XXX,XX @@ test_aarch64_timeouts = {
   'aspeed_ast2700a2' : 600,
   'aspeed_ast2700fc' : 600,
   'device_passthrough' : 720,
+  'imx8mm_evk' : 240,
   'imx8mp_evk' : 240,
   'raspi4' : 480,
   'reverse_debug' : 180,
@@ -XXX,XX +XXX,XX @@ tests_aarch64_system_thorough = [
   'aspeed_ast2700fc',
   'device_passthrough',
   'hotplug_pci',
+  'imx8mm_evk',
   'imx8mp_evk',
   'kvm',
   'multiprocess',
diff --git a/tests/functional/aarch64/test_imx8mm_evk.py b/tests/functional/aarch64/test_imx8mm_evk.py
new file mode 100755
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/tests/functional/aarch64/test_imx8mm_evk.py
@@ -XXX,XX +XXX,XX @@
+#!/usr/bin/env python3
+#
+# Functional test that boots a Linux kernel and checks the console
+#
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+from qemu_test import LinuxKernelTest, Asset
+
+
+class Imx8mmEvkMachine(LinuxKernelTest):
+
+    ASSET_IMAGE = Asset(
+        ('https://cloud.debian.org/images/cloud/bookworm/20231210-1590/'
+         'debian-12-generic-arm64-20231210-1590.tar.xz'),
+        '7ebf1577b32d5af6204df74b54ca2e4675de9b5a9fa14f3ff70b88eeb7b3b359')
+
+    KERNEL_OFFSET = 0x51000000
+    KERNEL_SIZE = 32622528
+    INITRD_OFFSET = 0x76000000
+    INITRD_SIZE = 30987766
+    DTB_OFFSET = 0x64DB5000
+    DTB_SIZE = 36812
+
+    def extract(self, in_path, out_path, offset, size):
+        try:
+            with open(in_path, "rb") as source:
+                source.seek(offset)
+                data = source.read(size)
+            with open(out_path, "wb") as target:
+                target.write(data)
+        except (IOError, ValueError) as e:
+            self.log.error(f"Failed to extract {out_path}: {e}")
+            raise
+
+    def setUp(self):
+        super().setUp()
+
+        self.image_path = self.scratch_file("disk.raw")
+        self.kernel_path = self.scratch_file("linux")
+        self.initrd_path = self.scratch_file("initrd.zstd")
+        self.dtb_path = self.scratch_file("imx8mm-evk.dtb")
+
+        self.archive_extract(self.ASSET_IMAGE)
+        self.extract(self.image_path, self.kernel_path,
+                     self.KERNEL_OFFSET, self.KERNEL_SIZE)
+        self.extract(self.image_path, self.initrd_path,
+                     self.INITRD_OFFSET, self.INITRD_SIZE)
+        self.extract(self.image_path, self.dtb_path,
+                     self.DTB_OFFSET, self.DTB_SIZE)
+
+    def test_aarch64_imx8mm_evk_usdhc(self):
+        self.require_accelerator("tcg")
+        self.set_machine('imx8mm-evk')
+        self.vm.set_console(console_index=1)
+        self.vm.add_args('-m', '2G',
+                         '-smp', '4',
+                         '-kernel', self.kernel_path,
+                         '-initrd', self.initrd_path,
+                         '-dtb', self.dtb_path,
+                         '-append', 'root=/dev/mmcblk2p1',
+                         '-drive', f'file={self.image_path},if=sd,bus=2,'
+                                    'format=raw,id=mmcblk2,snapshot=on')
+
+        self.vm.launch()
+        self.wait_for_console_pattern('Welcome to ')
+
+
+if __name__ == '__main__':
+    LinuxKernelTest.main()
-- 
2.43.0

From: Philippe Mathieu-Daudé <philmd@linaro.org>

As mentioned by Richard in [*]:

We don't actually need any specific endianness here, because
  every byte has the same value.  So we could simply drop MO_TE.
  That would produce a store in host-endianness, which will be
  fractionally more efficient on some hosts.

[*] https://lore.kernel.org/qemu-devel/d64d3576-9188-4e74-afdc-3492c9feb8e0@linaro.org/

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20260414005348.4767-2-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/helper-a64.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/target/arm/tcg/helper-a64.c b/target/arm/tcg/helper-a64.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/helper-a64.c
+++ b/target/arm/tcg/helper-a64.c
@@ -XXX,XX +XXX,XX @@ static uint64_t set_step_tags(CPUARMState *env, uint64_t toaddr,
          * the page dirty and will use the fast path.
          */
         uint64_t repldata = data * 0x0101010101010101ULL;
-        MemOpIdx oi16 = make_memop_idx(MO_TE | MO_128, memidx);
+        MemOpIdx oi16 = make_memop_idx(MO_128, memidx);
         cpu_st16_mmu(env, toaddr, int128_make128(repldata, repldata), oi16, ra);
         mte_mops_set_tags(env, toaddr, 16, *mtedesc);
         return 16;
-- 
2.43.0

From: Philippe Mathieu-Daudé <philmd@linaro.org>

Extract the implicit MO_TE definition in order to replace
it in the next commit.

Mechanical change using:

$ for n in UW UL UQ UO SW SL SQ; do \
      sed -i -e "s/MO_TE$n/MO_TE | MO_$n/" \
           $(git grep -l MO_TE$n target/arm); \
    done

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20260414005348.4767-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/m_helper.c   |  6 +--
 target/arm/tcg/mve_helper.c | 79 ++++++++++++++++++++-----------------
 2 files changed, 45 insertions(+), 40 deletions(-)

diff --git a/target/arm/tcg/m_helper.c b/target/arm/tcg/m_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/m_helper.c
+++ b/target/arm/tcg/m_helper.c
@@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest)
 
     /* Note that these stores can throw exceptions on MPU faults */
     ARMMMUIdx mmu_idx = arm_mmu_idx(env);
-    MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN,
+    MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN,
                                  arm_to_core_mmu_idx(mmu_idx));
     cpu_stl_mmu(env, sp, nextinst, oi, GETPC());
     cpu_stl_mmu(env, sp + 4, saved_psr, oi, GETPC());
@@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr)
     bool lspact = env->v7m.fpccr[s] & R_V7M_FPCCR_LSPACT_MASK;
     uintptr_t ra = GETPC();
     ARMMMUIdx mmu_idx = arm_mmu_idx(env);
-    MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN,
+    MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN,
                                  arm_to_core_mmu_idx(mmu_idx));
 
     assert(env->v7m.secure);
@@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlldm)(CPUARMState *env, uint32_t fptr)
     ARMCPU *cpu = env_archcpu(env);
     uintptr_t ra = GETPC();
     ARMMMUIdx mmu_idx = arm_mmu_idx(env);
-    MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN,
+    MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN,
                                  arm_to_core_mmu_idx(mmu_idx));
 
     /* fptr is the value of Rn, the frame pointer we load the FP regs from */
diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/mve_helper.c
+++ b/target/arm/tcg/mve_helper.c
@@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env)
     }
 
 DO_VLDR(vldrb, MO_UB, 1, uint8_t, ldb, 1, uint8_t)
-DO_VLDR(vldrh, MO_TEUW, 2, uint16_t, ldw, 2, uint16_t)
-DO_VLDR(vldrw, MO_TEUL, 4, uint32_t, ldl, 4, uint32_t)
+DO_VLDR(vldrh, MO_TE | MO_UW, 2, uint16_t, ldw, 2, uint16_t)
+DO_VLDR(vldrw, MO_TE | MO_UL, 4, uint32_t, ldl, 4, uint32_t)
 
 DO_VSTR(vstrb, MO_UB, 1, stb, 1, uint8_t)
-DO_VSTR(vstrh, MO_TEUW, 2, stw, 2, uint16_t)
-DO_VSTR(vstrw, MO_TEUL, 4, stl, 4, uint32_t)
+DO_VSTR(vstrh, MO_TE | MO_UW, 2, stw, 2, uint16_t)
+DO_VSTR(vstrw, MO_TE | MO_UL, 4, stl, 4, uint32_t)
 
 DO_VLDR(vldrb_sh, MO_SB, 1, int8_t, ldb, 2, int16_t)
 DO_VLDR(vldrb_sw, MO_SB, 1, int8_t, ldb, 4, int32_t)
 DO_VLDR(vldrb_uh, MO_UB, 1, uint8_t, ldb, 2, uint16_t)
 DO_VLDR(vldrb_uw, MO_UB, 1, uint8_t, ldb, 4, uint32_t)
-DO_VLDR(vldrh_sw, MO_TESW, 2, int16_t, ldw, 4, int32_t)
-DO_VLDR(vldrh_uw, MO_TEUW, 2, uint16_t, ldw, 4, uint32_t)
+DO_VLDR(vldrh_sw, MO_TE | MO_SW, 2, int16_t, ldw, 4, int32_t)
+DO_VLDR(vldrh_uw, MO_TE | MO_UW, 2, uint16_t, ldw, 4, uint32_t)
 
 DO_VSTR(vstrb_h, MO_UB, 1, stb, 2, int16_t)
 DO_VSTR(vstrb_w, MO_UB, 1, stb, 4, int32_t)
-DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t)
+DO_VSTR(vstrh_w, MO_TE | MO_UW, 2, stw, 4, int32_t)
 
 #undef DO_VLDR
 #undef DO_VSTR
@@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t)
         unsigned e;                                                     \
         uint32_t addr;                                                  \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (e = 0; e < 16 / 4; e++, mask >>= 4, eci_mask >>= 4) {      \
             if (!(eci_mask & 1)) {                                      \
                 continue;                                               \
@@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t)
         unsigned e;                                                     \
         uint32_t addr;                                                  \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (e = 0; e < 16 / 4; e++, mask >>= 4, eci_mask >>= 4) {      \
             if (!(eci_mask & 1)) {                                      \
                 continue;                                               \
@@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t)
 
 DO_VLDR_SG(vldrb_sg_sh, MO_SB, int8_t, ldb, 2, int16_t, uint16_t, ADDR_ADD, false)
 DO_VLDR_SG(vldrb_sg_sw, MO_SB, int8_t, ldb, 4, int32_t, uint32_t, ADDR_ADD, false)
-DO_VLDR_SG(vldrh_sg_sw, MO_TESW, int16_t, ldw, 4, int32_t, uint32_t, ADDR_ADD, false)
+DO_VLDR_SG(vldrh_sg_sw, MO_TE | MO_SW, int16_t, ldw, 4,
+           int32_t, uint32_t, ADDR_ADD, false)
 
 DO_VLDR_SG(vldrb_sg_ub, MO_UB, uint8_t, ldb, 1, uint8_t, uint8_t, ADDR_ADD, false)
 DO_VLDR_SG(vldrb_sg_uh, MO_UB, uint8_t, ldb, 2, uint16_t, uint16_t, ADDR_ADD, false)
 DO_VLDR_SG(vldrb_sg_uw, MO_UB, uint8_t, ldb, 4, uint32_t, uint32_t, ADDR_ADD, false)
-DO_VLDR_SG(vldrh_sg_uh, MO_TEUW, uint16_t, ldw, 2, uint16_t, uint16_t, ADDR_ADD, false)
-DO_VLDR_SG(vldrh_sg_uw, MO_TEUW, uint16_t, ldw, 4, uint32_t, uint32_t, ADDR_ADD, false)
-DO_VLDR_SG(vldrw_sg_uw, MO_TEUL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD, false)
+DO_VLDR_SG(vldrh_sg_uh, MO_TE | MO_UW, uint16_t, ldw, 2,
+           uint16_t, uint16_t, ADDR_ADD, false)
+DO_VLDR_SG(vldrh_sg_uw, MO_TE | MO_UW, uint16_t, ldw, 4,
+           uint32_t, uint32_t, ADDR_ADD, false)
+DO_VLDR_SG(vldrw_sg_uw, MO_TE | MO_UL, uint32_t, ldl, 4,
+           uint32_t, uint32_t, ADDR_ADD, false)
 DO_VLDR64_SG(vldrd_sg_ud, ADDR_ADD, false)
 
-DO_VLDR_SG(vldrh_sg_os_sw, MO_TESW, int16_t, ldw, 4,
+DO_VLDR_SG(vldrh_sg_os_sw, MO_TE | MO_SW, int16_t, ldw, 4,
            int32_t, uint32_t, ADDR_ADD_OSH, false)
-DO_VLDR_SG(vldrh_sg_os_uh, MO_TEUW, uint16_t, ldw, 2,
+DO_VLDR_SG(vldrh_sg_os_uh, MO_TE | MO_UW, uint16_t, ldw, 2,
            uint16_t, uint16_t, ADDR_ADD_OSH, false)
-DO_VLDR_SG(vldrh_sg_os_uw, MO_TEUW, uint16_t, ldw, 4,
+DO_VLDR_SG(vldrh_sg_os_uw, MO_TE | MO_UW, uint16_t, ldw, 4,
            uint32_t, uint32_t, ADDR_ADD_OSH, false)
-DO_VLDR_SG(vldrw_sg_os_uw, MO_TEUL, uint32_t, ldl, 4,
+DO_VLDR_SG(vldrw_sg_os_uw, MO_TE | MO_UL, uint32_t, ldl, 4,
            uint32_t, uint32_t, ADDR_ADD_OSW, false)
 DO_VLDR64_SG(vldrd_sg_os_ud, ADDR_ADD_OSD, false)
 
 DO_VSTR_SG(vstrb_sg_ub, MO_UB, stb, 1, uint8_t, ADDR_ADD, false)
 DO_VSTR_SG(vstrb_sg_uh, MO_UB, stb, 2, uint16_t, ADDR_ADD, false)
 DO_VSTR_SG(vstrb_sg_uw, MO_UB, stb, 4, uint32_t, ADDR_ADD, false)
-DO_VSTR_SG(vstrh_sg_uh, MO_TEUW, stw, 2, uint16_t, ADDR_ADD, false)
-DO_VSTR_SG(vstrh_sg_uw, MO_TEUW, stw, 4, uint32_t, ADDR_ADD, false)
-DO_VSTR_SG(vstrw_sg_uw, MO_TEUL, stl, 4, uint32_t, ADDR_ADD, false)
+DO_VSTR_SG(vstrh_sg_uh, MO_TE | MO_UW, stw, 2, uint16_t, ADDR_ADD, false)
+DO_VSTR_SG(vstrh_sg_uw, MO_TE | MO_UW, stw, 4, uint32_t, ADDR_ADD, false)
+DO_VSTR_SG(vstrw_sg_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD, false)
 DO_VSTR64_SG(vstrd_sg_ud, ADDR_ADD, false)
 
-DO_VSTR_SG(vstrh_sg_os_uh, MO_TEUW, stw, 2, uint16_t, ADDR_ADD_OSH, false)
-DO_VSTR_SG(vstrh_sg_os_uw, MO_TEUW, stw, 4, uint32_t, ADDR_ADD_OSH, false)
-DO_VSTR_SG(vstrw_sg_os_uw, MO_TEUL, stl, 4, uint32_t, ADDR_ADD_OSW, false)
+DO_VSTR_SG(vstrh_sg_os_uh, MO_TE | MO_UW, stw, 2, uint16_t, ADDR_ADD_OSH, false)
+DO_VSTR_SG(vstrh_sg_os_uw, MO_TE | MO_UW, stw, 4, uint32_t, ADDR_ADD_OSH, false)
+DO_VSTR_SG(vstrw_sg_os_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD_OSW, false)
 DO_VSTR64_SG(vstrd_sg_os_ud, ADDR_ADD_OSD, false)
 
-DO_VLDR_SG(vldrw_sg_wb_uw, MO_TEUL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD, true)
+DO_VLDR_SG(vldrw_sg_wb_uw, MO_TE | MO_UL, uint32_t, ldl, 4,
+           uint32_t, uint32_t, ADDR_ADD, true)
 DO_VLDR64_SG(vldrd_sg_wb_ud, ADDR_ADD, true)
-DO_VSTR_SG(vstrw_sg_wb_uw, MO_TEUL, stl, 4, uint32_t, ADDR_ADD, true)
+DO_VSTR_SG(vstrw_sg_wb_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD, true)
 DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true)
 
 /*
@@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true)
         static const uint8_t off[4] = { O1, O2, O3, O4 };               \
         uint32_t addr, data;                                            \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true)
         int y; /* y counts 0 2 0 2 */                                   \
         uint16_t *qd;                                                   \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (beat = 0, y = 0; beat < 4; beat++, mask >>= 4, y ^= 2) {   \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true)
         uint32_t *qd;                                                   \
         int y;                                                          \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9)
         uint32_t addr, data;                                            \
         uint8_t *qd;                                                    \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9)
         int e;                                                          \
         uint16_t *qd;                                                   \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9)
         uint32_t addr, data;                                            \
         uint32_t *qd;                                                   \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20)
         static const uint8_t off[4] = { O1, O2, O3, O4 };               \
         uint32_t addr, data;                                            \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20)
         int y; /* y counts 0 2 0 2 */                                   \
         uint16_t *qd;                                                   \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (beat = 0, y = 0; beat < 4; beat++, mask >>= 4, y ^= 2) {   \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20)
         uint32_t *qd;                                                   \
         int y;                                                          \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9)
         uint32_t addr, data;                                            \
         uint8_t *qd;                                                    \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9)
         int e;                                                          \
         uint16_t *qd;                                                   \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9)
         uint32_t addr, data;                                            \
         uint32_t *qd;                                                   \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
-- 
2.43.0

From: Philippe Mathieu-Daudé <philmd@linaro.org>

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20260414005348.4767-4-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/mve_helper.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

From: Philippe Mathieu-Daudé <philmd@linaro.org>

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20260414005348.4767-5-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/mve_helper.c | 43 +++++++++++++++++--------------------
 1 file changed, 20 insertions(+), 23 deletions(-)

diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/mve_helper.c
+++ b/target/arm/tcg/mve_helper.c
@@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t)
         unsigned e;                                                     \
         uint32_t addr;                                                  \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MFLAG | MO_ALIGN, mmu_idx);        \
+        MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN,          \
+                                     mmu_idx);                          \
         for (e = 0; e < 16 / ESIZE; e++, mask >>= ESIZE, eci_mask >>= ESIZE) { \
             if (!(eci_mask & 1)) {                                      \
                 continue;                                               \
@@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t)
         unsigned e;                                                     \
         uint32_t addr;                                                  \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MFLAG | MO_ALIGN, mmu_idx);        \
+        MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN,          \
+                                     mmu_idx);                          \
         for (e = 0; e < 16 / ESIZE; e++, mask >>= ESIZE, eci_mask >>= ESIZE) { \
             if (!(eci_mask & 1)) {                                      \
                 continue;                                               \
@@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t)
 
 DO_VLDR_SG(vldrb_sg_sh, MO_SB, int8_t, ldb, 2, int16_t, uint16_t, ADDR_ADD, false)
 DO_VLDR_SG(vldrb_sg_sw, MO_SB, int8_t, ldb, 4, int32_t, uint32_t, ADDR_ADD, false)
-DO_VLDR_SG(vldrh_sg_sw, MO_TE | MO_SW, int16_t, ldw, 4,
-           int32_t, uint32_t, ADDR_ADD, false)
+DO_VLDR_SG(vldrh_sg_sw, MO_SW, int16_t, ldw, 4, int32_t, uint32_t, ADDR_ADD, false)
 
 DO_VLDR_SG(vldrb_sg_ub, MO_UB, uint8_t, ldb, 1, uint8_t, uint8_t, ADDR_ADD, false)
 DO_VLDR_SG(vldrb_sg_uh, MO_UB, uint8_t, ldb, 2, uint16_t, uint16_t, ADDR_ADD, false)
 DO_VLDR_SG(vldrb_sg_uw, MO_UB, uint8_t, ldb, 4, uint32_t, uint32_t, ADDR_ADD, false)
-DO_VLDR_SG(vldrh_sg_uh, MO_TE | MO_UW, uint16_t, ldw, 2,
-           uint16_t, uint16_t, ADDR_ADD, false)
-DO_VLDR_SG(vldrh_sg_uw, MO_TE | MO_UW, uint16_t, ldw, 4,
-           uint32_t, uint32_t, ADDR_ADD, false)
-DO_VLDR_SG(vldrw_sg_uw, MO_TE | MO_UL, uint32_t, ldl, 4,
-           uint32_t, uint32_t, ADDR_ADD, false)
+DO_VLDR_SG(vldrh_sg_uh, MO_UW, uint16_t, ldw, 2, uint16_t, uint16_t, ADDR_ADD, false)
+DO_VLDR_SG(vldrh_sg_uw, MO_UW, uint16_t, ldw, 4, uint32_t, uint32_t, ADDR_ADD, false)
+DO_VLDR_SG(vldrw_sg_uw, MO_UL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD, false)
 DO_VLDR64_SG(vldrd_sg_ud, ADDR_ADD, false)
 
-DO_VLDR_SG(vldrh_sg_os_sw, MO_TE | MO_SW, int16_t, ldw, 4,
+DO_VLDR_SG(vldrh_sg_os_sw, MO_SW, int16_t, ldw, 4,
            int32_t, uint32_t, ADDR_ADD_OSH, false)
-DO_VLDR_SG(vldrh_sg_os_uh, MO_TE | MO_UW, uint16_t, ldw, 2,
+DO_VLDR_SG(vldrh_sg_os_uh, MO_UW, uint16_t, ldw, 2,
            uint16_t, uint16_t, ADDR_ADD_OSH, false)
-DO_VLDR_SG(vldrh_sg_os_uw, MO_TE | MO_UW, uint16_t, ldw, 4,
+DO_VLDR_SG(vldrh_sg_os_uw, MO_UW, uint16_t, ldw, 4,
            uint32_t, uint32_t, ADDR_ADD_OSH, false)
-DO_VLDR_SG(vldrw_sg_os_uw, MO_TE | MO_UL, uint32_t, ldl, 4,
+DO_VLDR_SG(vldrw_sg_os_uw, MO_UL, uint32_t, ldl, 4,
            uint32_t, uint32_t, ADDR_ADD_OSW, false)
 DO_VLDR64_SG(vldrd_sg_os_ud, ADDR_ADD_OSD, false)
 
 DO_VSTR_SG(vstrb_sg_ub, MO_UB, stb, 1, uint8_t, ADDR_ADD, false)
 DO_VSTR_SG(vstrb_sg_uh, MO_UB, stb, 2, uint16_t, ADDR_ADD, false)
 DO_VSTR_SG(vstrb_sg_uw, MO_UB, stb, 4, uint32_t, ADDR_ADD, false)
-DO_VSTR_SG(vstrh_sg_uh, MO_TE | MO_UW, stw, 2, uint16_t, ADDR_ADD, false)
-DO_VSTR_SG(vstrh_sg_uw, MO_TE | MO_UW, stw, 4, uint32_t, ADDR_ADD, false)
-DO_VSTR_SG(vstrw_sg_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD, false)
+DO_VSTR_SG(vstrh_sg_uh, MO_UW, stw, 2, uint16_t, ADDR_ADD, false)
+DO_VSTR_SG(vstrh_sg_uw, MO_UW, stw, 4, uint32_t, ADDR_ADD, false)
+DO_VSTR_SG(vstrw_sg_uw, MO_UL, stl, 4, uint32_t, ADDR_ADD, false)
 DO_VSTR64_SG(vstrd_sg_ud, ADDR_ADD, false)
 
-DO_VSTR_SG(vstrh_sg_os_uh, MO_TE | MO_UW, stw, 2, uint16_t, ADDR_ADD_OSH, false)
-DO_VSTR_SG(vstrh_sg_os_uw, MO_TE | MO_UW, stw, 4, uint32_t, ADDR_ADD_OSH, false)
-DO_VSTR_SG(vstrw_sg_os_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD_OSW, false)
+DO_VSTR_SG(vstrh_sg_os_uh, MO_UW, stw, 2, uint16_t, ADDR_ADD_OSH, false)
+DO_VSTR_SG(vstrh_sg_os_uw, MO_UW, stw, 4, uint32_t, ADDR_ADD_OSH, false)
+DO_VSTR_SG(vstrw_sg_os_uw, MO_UL, stl, 4, uint32_t, ADDR_ADD_OSW, false)
 DO_VSTR64_SG(vstrd_sg_os_ud, ADDR_ADD_OSD, false)
 
-DO_VLDR_SG(vldrw_sg_wb_uw, MO_TE | MO_UL, uint32_t, ldl, 4,
-           uint32_t, uint32_t, ADDR_ADD, true)
+DO_VLDR_SG(vldrw_sg_wb_uw, MO_UL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD, true)
 DO_VLDR64_SG(vldrd_sg_wb_ud, ADDR_ADD, true)
-DO_VSTR_SG(vstrw_sg_wb_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD, true)
+DO_VSTR_SG(vstrw_sg_wb_uw, MO_UL, stl, 4, uint32_t, ADDR_ADD, true)
 DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true)
 
 /*
-- 
2.43.0

From: Philippe Mathieu-Daudé <philmd@linaro.org>

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20260414005348.4767-6-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/internals.h      | 6 ++++++
 target/arm/tcg/mve_helper.c | 3 ++-
 2 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/target/arm/internals.h b/target/arm/internals.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/internals.h
+++ b/target/arm/internals.h
@@ -XXX,XX +XXX,XX @@
 #include "exec/hwaddr.h"
 #include "exec/vaddr.h"
 #include "exec/breakpoint.h"
+#include "exec/memop.h"
 #include "accel/tcg/tb-cpu-state.h"
 #include "hw/core/registerfields.h"
 #include "tcg/tcg-gvec-desc.h"
@@ -XXX,XX +XXX,XX @@
 #define BANK_HYP    6
 #define BANK_MON    7
 
+static inline MemOp mo_endian(CPUARMState *env)
+{
+    return EX_TBFLAG_ANY(env->hflags, BE_DATA) ? MO_BE : MO_LE;
+}
+
 static inline int arm_env_mmu_index(CPUARMState *env)
 {
     return EX_TBFLAG_ANY(env->hflags, MMUIDX);
diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/mve_helper.c
+++ b/target/arm/tcg/mve_helper.c
@@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t)
         unsigned e;                                                     \
         uint32_t addr;                                                  \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (e = 0; e < 16 / 4; e++, mask >>= 4, eci_mask >>= 4) {      \
             if (!(eci_mask & 1)) {                                      \
                 continue;                                               \
-- 
2.43.0

From: Philippe Mathieu-Daudé <philmd@linaro.org>

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20260414005348.4767-7-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/mve_helper.c | 47 +++++++++++++++++++++++--------------
 1 file changed, 30 insertions(+), 17 deletions(-)

diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/mve_helper.c
+++ b/target/arm/tcg/mve_helper.c
@@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env)
         uint16_t eci_mask = mve_eci_mask(env);                          \
         unsigned b, e;                                                  \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN,          \
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MFLAG | MO_ALIGN, \
                                      mmu_idx);                          \
         /*                                                              \
          * R_SXTM allows the dest reg to become UNKNOWN for abandoned   \
@@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env)
         uint16_t mask = mve_element_mask(env);                          \
         unsigned b, e;                                                  \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN,          \
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MFLAG | MO_ALIGN, \
                                      mmu_idx);                          \
         for (b = 0, e = 0; b < 16; b += ESIZE, e++) {                   \
             if (mask & (1 << b)) {                                      \
@@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t)
         unsigned e;                                                     \
         uint32_t addr;                                                  \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN,          \
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MFLAG | MO_ALIGN, \
                                      mmu_idx);                          \
         for (e = 0; e < 16 / ESIZE; e++, mask >>= ESIZE, eci_mask >>= ESIZE) { \
             if (!(eci_mask & 1)) {                                      \
@@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t)
         unsigned e;                                                     \
         uint32_t addr;                                                  \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN,          \
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MFLAG | MO_ALIGN, \
                                      mmu_idx);                          \
         for (e = 0; e < 16 / ESIZE; e++, mask >>= ESIZE, eci_mask >>= ESIZE) { \
             if (!(eci_mask & 1)) {                                      \
@@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t)
         unsigned e;                                                     \
         uint32_t addr;                                                  \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (e = 0; e < 16 / 4; e++, mask >>= 4, eci_mask >>= 4) {      \
             if (!(eci_mask & 1)) {                                      \
                 continue;                                               \
@@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true)
         static const uint8_t off[4] = { O1, O2, O3, O4 };               \
         uint32_t addr, data;                                            \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true)
         int y; /* y counts 0 2 0 2 */                                   \
         uint16_t *qd;                                                   \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (beat = 0, y = 0; beat < 4; beat++, mask >>= 4, y ^= 2) {   \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true)
         uint32_t *qd;                                                   \
         int y;                                                          \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9)
         uint32_t addr, data;                                            \
         uint8_t *qd;                                                    \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9)
         int e;                                                          \
         uint16_t *qd;                                                   \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9)
         uint32_t addr, data;                                            \
         uint32_t *qd;                                                   \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20)
         static const uint8_t off[4] = { O1, O2, O3, O4 };               \
         uint32_t addr, data;                                            \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20)
         int y; /* y counts 0 2 0 2 */                                   \
         uint16_t *qd;                                                   \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (beat = 0, y = 0; beat < 4; beat++, mask >>= 4, y ^= 2) {   \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20)
         uint32_t *qd;                                                   \
         int y;                                                          \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9)
         uint32_t addr, data;                                            \
         uint8_t *qd;                                                    \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9)
         int e;                                                          \
         uint16_t *qd;                                                   \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9)
         uint32_t addr, data;                                            \
         uint32_t *qd;                                                   \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
-- 
2.43.0

From: Philippe Mathieu-Daudé <philmd@linaro.org>

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20260414005348.4767-8-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/meson.build  | 3 ++-
 target/arm/tcg/mve_helper.c | 2 +-
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/target/arm/tcg/meson.build b/target/arm/tcg/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/meson.build
+++ b/target/arm/tcg/meson.build
@@ -XXX,XX +XXX,XX @@ arm_ss.add(when: 'TARGET_AARCH64', if_false: files('stubs32.c'))
 arm_ss.add(files(
   'cpu32.c',
   'm_helper.c',
-  'mve_helper.c',
 ))
 
 arm_ss.add(when: 'TARGET_AARCH64', if_true: files(
@@ -XXX,XX +XXX,XX @@ arm_common_system_ss.add(
   'debug.c',
   'hflags.c',
   'gengvec.c',
+  'mve_helper.c',
   'neon_helper.c',
   'op_helper.c',
   'psci.c',
@@ -XXX,XX +XXX,XX @@ arm_user_ss.add(
   'debug.c',
   'gengvec.c',
   'hflags.c',
+  'mve_helper.c',
   'neon_helper.c',
   'op_helper.c',
   'tlb_helper.c',
diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/mve_helper.c
+++ b/target/arm/tcg/mve_helper.c
@@ -XXX,XX +XXX,XX @@
 #include "helper-mve.h"
 #include "internals.h"
 #include "vec_internal.h"
-#include "accel/tcg/cpu-ldst.h"
+#include "accel/tcg/cpu-ldst-common.h"
 #include "tcg/tcg.h"
 #include "fpu/softfloat.h"
 #include "crypto/clmul.h"
-- 
2.43.0

From: Philippe Mathieu-Daudé <philmd@linaro.org>

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20260414005348.4767-9-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/m_helper.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

From: Philippe Mathieu-Daudé <philmd@linaro.org>

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20260414005348.4767-10-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/m_helper.c  | 2 +-
 target/arm/tcg/meson.build | 3 ++-
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/target/arm/tcg/m_helper.c b/target/arm/tcg/m_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/m_helper.c
+++ b/target/arm/tcg/m_helper.c
@@ -XXX,XX +XXX,XX @@
 #include "qemu/log.h"
 #include "exec/page-protection.h"
 #ifdef CONFIG_TCG
-#include "accel/tcg/cpu-ldst.h"
+#include "accel/tcg/cpu-ldst-common.h"
 #include "semihosting/common-semi.h"
 #endif
 #if !defined(CONFIG_USER_ONLY)
diff --git a/target/arm/tcg/meson.build b/target/arm/tcg/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/meson.build
+++ b/target/arm/tcg/meson.build
@@ -XXX,XX +XXX,XX @@ arm_ss.add(when: 'TARGET_AARCH64', if_false: files('stubs32.c'))
 
 arm_ss.add(files(
   'cpu32.c',
-  'm_helper.c',
 ))
 
 arm_ss.add(when: 'TARGET_AARCH64', if_true: files(
@@ -XXX,XX +XXX,XX @@ arm_common_system_ss.add(
   'debug.c',
   'hflags.c',
   'gengvec.c',
+  'm_helper.c',
   'mve_helper.c',
   'neon_helper.c',
   'op_helper.c',
@@ -XXX,XX +XXX,XX @@ arm_user_ss.add(
   'debug.c',
   'gengvec.c',
   'hflags.c',
+  'm_helper.c',
   'mve_helper.c',
   'neon_helper.c',
   'op_helper.c',
-- 
2.43.0

From: Thomas Huth <thuth@redhat.com>

When writing to this register, QEMU currently aborts:

$ echo "readl 0x10000018" | ./qemu-system-arm -audiodev none,id=snd0 \
    -M integratorcp,accel=qtest,audiodev=snd0 -display none -qtest stdio
 [I 0.000000] OPENED
 [R +0.001907] readl 0x10000018
 qemu: hardware error: integratorcm_read: CM_LMBUSCNT
 [...]
 Aborted                    (core dumped)

This is bad, a guest should ideally never be able to kill QEMU like this.

Now, according to the "Intergrator/CP User Guide" from:

https://developer.arm.com/documentation/dui0159/b/porting-integrator-ap-and-im-pd1/registers

"The Integrator/AP CM_LMBUSCNT has been removed."

That means this register does not seem to be implemented on real CP boards
at all, only for older AP boards. Thus it should be fine if we simply
ignore this register in QEMU and handle it like all other unimplemented
registers in the "default" handler of the case statement.

Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3407
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20260420064933.64765-1-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/integratorcp.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/hw/arm/integratorcp.c b/hw/arm/integratorcp.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/integratorcp.c
+++ b/hw/arm/integratorcp.c
@@ -XXX,XX +XXX,XX @@ static uint64_t integratorcm_read(void *opaque, hwaddr offset,
         } else {
             return s->cm_lock;
         }
-    case 6: /* CM_LMBUSCNT */
-        /* ??? High frequency timer.  */
-        hw_error("integratorcm_read: CM_LMBUSCNT");
     case 7: /* CM_AUXOSC */
         return s->cm_auxosc;
     case 8: /* CM_SDRAM */
-- 
2.43.0

include/hw/arm/primecell.h used to be more expansive, but now the
only thing it defines is the ARM_SYSCTL_GPIO_* constants for the GPIO
lines for the arm-sysctl system-control device used on the Realview,
Versatile and Versatile Express boards.

Replace it with a header file specific to that device.

virt.c and vmapple.c included primecell.h despite not using the
constants it defined; there we can simply drop the include entirely.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20260416172627.690396-1-peter.maydell@linaro.org
---
 MAINTAINERS                  |  2 +-
 hw/arm/realview.c            |  2 +-
 hw/arm/vexpress.c            |  2 +-
 hw/arm/virt.c                |  1 -
 hw/misc/arm_sysctl.c         |  2 +-
 hw/vmapple/vmapple.c         |  1 -
 include/hw/arm/primecell.h   | 12 ------------
 include/hw/misc/arm_sysctl.h | 16 ++++++++++++++++
 8 files changed, 20 insertions(+), 18 deletions(-)
 delete mode 100644 include/hw/arm/primecell.h
 create mode 100644 include/hw/misc/arm_sysctl.h

diff --git a/MAINTAINERS b/MAINTAINERS
index XXXXXXX..XXXXXXX 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -XXX,XX +XXX,XX @@ F: hw/ssi/pl022.c
 F: include/hw/ssi/pl022.h
 F: hw/rtc/pl031.c
 F: include/hw/rtc/pl031.h
-F: include/hw/arm/primecell.h
 F: hw/timer/cmsdk-apb-timer.c
 F: include/hw/timer/cmsdk-apb-timer.h
 F: tests/qtest/cmsdk-apb-timer-test.c
@@ -XXX,XX +XXX,XX @@ F: hw/*/versatile*
 F: hw/i2c/arm_sbcon_i2c.c
 F: include/hw/i2c/arm_sbcon_i2c.h
 F: hw/misc/arm_sysctl.c
+F: include/hw/misc/arm_sysctl.h
 F: docs/system/arm/versatile.rst
 
 Virt
diff --git a/hw/arm/realview.c b/hw/arm/realview.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/realview.c
+++ b/hw/arm/realview.c
@@ -XXX,XX +XXX,XX @@
 #include "target/arm/cpu.h"
 #include "hw/core/sysbus.h"
 #include "hw/arm/boot.h"
-#include "hw/arm/primecell.h"
 #include "hw/arm/machines-qom.h"
 #include "hw/core/split-irq.h"
+#include "hw/misc/arm_sysctl.h"
 #include "hw/net/lan9118.h"
 #include "hw/net/smc91c111.h"
 #include "hw/pci/pci.h"
diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/vexpress.c
+++ b/hw/arm/vexpress.c
@@ -XXX,XX +XXX,XX @@
 #include "qemu/datadir.h"
 #include "hw/core/sysbus.h"
 #include "hw/arm/boot.h"
-#include "hw/arm/primecell.h"
 #include "hw/arm/machines-qom.h"
+#include "hw/misc/arm_sysctl.h"
 #include "hw/net/lan9118.h"
 #include "hw/i2c/i2c.h"
 #include "net/net.h"
diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -XXX,XX +XXX,XX @@
 #include "monitor/qdev.h"
 #include "hw/core/sysbus.h"
 #include "hw/arm/boot.h"
-#include "hw/arm/primecell.h"
 #include "hw/arm/virt.h"
 #include "hw/arm/machines-qom.h"
 #include "hw/block/flash.h"
diff --git a/hw/misc/arm_sysctl.c b/hw/misc/arm_sysctl.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/misc/arm_sysctl.c
+++ b/hw/misc/arm_sysctl.c
@@ -XXX,XX +XXX,XX @@
 #include "system/runstate.h"
 #include "qemu/bitops.h"
 #include "hw/core/sysbus.h"
+#include "hw/misc/arm_sysctl.h"
 #include "migration/vmstate.h"
-#include "hw/arm/primecell.h"
 #include "qemu/log.h"
 #include "qemu/module.h"
 #include "qom/object.h"
diff --git a/hw/vmapple/vmapple.c b/hw/vmapple/vmapple.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/vmapple/vmapple.c
+++ b/hw/vmapple/vmapple.c
@@ -XXX,XX +XXX,XX @@
 #include "hw/core/sysbus.h"
 #include "hw/usb/usb.h"
 #include "hw/arm/boot.h"
-#include "hw/arm/primecell.h"
 #include "hw/char/pl011.h"
 #include "hw/intc/arm_gic.h"
 #include "hw/intc/arm_gicv3_common.h"
diff --git a/include/hw/arm/primecell.h b/include/hw/arm/primecell.h
deleted file mode 100644
index XXXXXXX..XXXXXXX
--- a/include/hw/arm/primecell.h
+++ /dev/null
@@ -XXX,XX +XXX,XX @@
-#ifndef PRIMECELL_H
-#define PRIMECELL_H
-
-/* Declarations for ARM PrimeCell based periperals.  */
-/* Also includes some devices that are currently only used by the
-   ARM boards.  */
-
-/* arm_sysctl GPIO lines */
-#define ARM_SYSCTL_GPIO_MMC_WPROT 0
-#define ARM_SYSCTL_GPIO_MMC_CARDIN 1
-
-#endif
diff --git a/include/hw/misc/arm_sysctl.h b/include/hw/misc/arm_sysctl.h
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/include/hw/misc/arm_sysctl.h
@@ -XXX,XX +XXX,XX @@
+/*
+ * Status and system control registers for ARM RealView/Versatile boards.
+ *
+ * Copyright (c) Linaro Ltd
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#ifndef HW_MISC_ARM_SYSCTL_H
+#define HW_MISC_ARM_SYSCTL_H
+
+/* arm_sysctl inbound GPIO lines */
+#define ARM_SYSCTL_GPIO_MMC_WPROT 0
+#define ARM_SYSCTL_GPIO_MMC_CARDIN 1
+
+#endif
-- 
2.43.0

If we create a normally-AArch64 CPU and configure it with
aarch64=off, this will by default leave all the AArch64 ID register
values in its ARMISARegisters struct untouched.  That in turn means
that tests of cpu_isar_feature(aa64_something, cpu) will return true.

Until now we have had a design policy that you shouldn't check an
aa64_ feature unless you know that the CPU has AArch64; but this is
quite fragile as it's easy to forget and only causes a problem in the
corner case where AArch64 was turned off.  In particular, when we
extend the ability to disable AArch64 from only KVM to also TCG there
are many more aa64 feature check points which we would otherwise have
to audit for whether they needed to be guarded with a check on
ARM_FEATURE_AARCH64.

Instead, make the CPU realize function zero out all the 64-bit ID
registers if a TCG CPU doesn't have AArch64; this will make aa64_
feature tests generally return false.

We only do this for TCG because only TCG really needs it, and for
KVM it might be confusing to have QEMU's idea of the ID registers
be different from KVM's.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20260416165353.589569-2-peter.maydell@linaro.org
---
 target/arm/cpu.c | 35 +++++++++++++++++++++++++++++++++++
 target/arm/cpu.h |  3 ++-
 2 files changed, 37 insertions(+), 1 deletion(-)

diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -XXX,XX +XXX,XX @@ void arm_cpu_finalize_features(ARMCPU *cpu, Error **errp)
     }
 }
 
+static void arm_clear_aarch64_idregs(ARMCPU *cpu)
+{
+    /* Zero out all the AArch64 ID registers in ARMISARegisters */
+    SET_IDREG(&cpu->isar, ID_AA64ISAR0, 0);
+    SET_IDREG(&cpu->isar, ID_AA64ISAR1, 0);
+    SET_IDREG(&cpu->isar, ID_AA64ISAR2, 0);
+    SET_IDREG(&cpu->isar, ID_AA64PFR0, 0);
+    SET_IDREG(&cpu->isar, ID_AA64PFR1, 0);
+    SET_IDREG(&cpu->isar, ID_AA64PFR2, 0);
+    SET_IDREG(&cpu->isar, ID_AA64MMFR0, 0);
+    SET_IDREG(&cpu->isar, ID_AA64MMFR1, 0);
+    SET_IDREG(&cpu->isar, ID_AA64MMFR2, 0);
+    SET_IDREG(&cpu->isar, ID_AA64MMFR3, 0);
+    SET_IDREG(&cpu->isar, ID_AA64DFR0, 0);
+    SET_IDREG(&cpu->isar, ID_AA64DFR1, 0);
+    SET_IDREG(&cpu->isar, ID_AA64AFR0, 0);
+    SET_IDREG(&cpu->isar, ID_AA64AFR1, 0);
+    SET_IDREG(&cpu->isar, ID_AA64ZFR0, 0);
+    SET_IDREG(&cpu->isar, ID_AA64SMFR0, 0);
+}
+
 static void arm_cpu_realizefn(DeviceState *dev, Error **errp)
 {
     CPUState *cs = CPU(dev);
@@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp)
     }
 #endif
 
+    /*
+     * A TCG aarch64=off CPU has no AArch64 at all, so we clear out the
+     * ID registers to avoid cpu_isar_feature(aa64_something, cpu) tests
+     * incorrectly returning true. We don't do this for other accelerators
+     * (which in practice means "for KVM", since no others have AArch32
+     * guest support) because from KVM's point of view the AArch64 ID
+     * registers still exist and must have their correct values. So we
+     * avoid clearing them out so that we don't have QEMU and KVM with
+     * different ideas of the ID registers.
+     */
+    if (tcg_enabled() && !arm_feature(env, ARM_FEATURE_AARCH64)) {
+        arm_clear_aarch64_idregs(cpu);
+    }
+
 #ifdef CONFIG_USER_ONLY
     /*
      * User mode relies on IC IVAU instructions to catch modification of
diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -XXX,XX +XXX,XX @@ struct ArchCPU {
      * Note that if you add an ID register to the ARMISARegisters struct
      * you need to also update the 32-bit and 64-bit versions of the
      * kvm_arm_get_host_cpu_features() function to correctly populate the
-     * field by reading the value from the KVM vCPU.
+     * field by reading the value from the KVM vCPU. If it is an AArch64
+     * ID register then you also must update arm_clear_aarch64_idregs().
      */
     struct ARMISARegisters {
         uint32_t mvfr0;
-- 
2.43.0

Allow the 'aarch64=off' property, which is currently KVM-only, to
be set for TCG CPUs also.

Note that we don't permit it on the qemu-aarch64 user-mode binary:
this makes no sense as that executable can only handle AArch64
syscalls (and it would also assert at startup since it doesn't
compile in the A32-specific GDB xml files like arm-neon.xml).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Clément Chigot <chigot@adacore.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20260416165353.589569-3-peter.maydell@linaro.org
---
 docs/system/arm/cpu-features.rst | 10 +++++----
 target/arm/cpu-features.h        |  5 +++++
 target/arm/cpu.c                 | 36 ++++++++++++++++++++++++++++----
 tests/qtest/arm-cpu-features.c   |  8 ++-----
 4 files changed, 45 insertions(+), 14 deletions(-)

diff --git a/docs/system/arm/cpu-features.rst b/docs/system/arm/cpu-features.rst
index XXXXXXX..XXXXXXX 100644
--- a/docs/system/arm/cpu-features.rst
+++ b/docs/system/arm/cpu-features.rst
@@ -XXX,XX +XXX,XX @@ not implement ARMv8-A, will not have the ``aarch64`` CPU property.
 QEMU's support may be limited for some CPU features, only partially
 supporting the feature or only supporting the feature under certain
 configurations.  For example, the ``aarch64`` CPU feature, which, when
-disabled, enables the optional AArch32 CPU feature, is only supported
-when using the KVM accelerator and when running on a host CPU type that
-supports the feature.  While ``aarch64`` currently only works with KVM,
-it could work with TCG.  CPU features that are specific to KVM are
+disabled, enables the optional AArch32 CPU feature, can only be set to
+``off`` on the TCG and KVM accelerators, and it cannot be set to
+``off`` under KVM unless running on a host CPU type that supports
+running guests in AArch32.
+
+CPU features that are inherently specific to KVM are
 prefixed with "kvm-" and are described in "KVM VCPU Features".
 
 CPU Feature Probing
diff --git a/target/arm/cpu-features.h b/target/arm/cpu-features.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu-features.h
+++ b/target/arm/cpu-features.h
@@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa64_aa32_el2(const ARMISARegisters *id)
     return FIELD_EX64_IDREG(id, ID_AA64PFR0, EL2) >= 2;
 }
 
+static inline bool isar_feature_aa64_aa32_el3(const ARMISARegisters *id)
+{
+    return FIELD_EX64_IDREG(id, ID_AA64PFR0, EL3) >= 2;
+}
+
 static inline bool isar_feature_aa64_ras(const ARMISARegisters *id)
 {
     return FIELD_EX64_IDREG(id, ID_AA64PFR0, RAS) != 0;
diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -XXX,XX +XXX,XX @@ static void aarch64_cpu_set_aarch64(Object *obj, bool value, Error **errp)
      * uniform execution state like do_interrupt.
      */
     if (value == false) {
-        if (!kvm_enabled() || !kvm_arm_aarch32_supported()) {
-            error_setg(errp, "'aarch64' feature cannot be disabled "
-                             "unless KVM is enabled and 32-bit EL1 "
-                             "is supported");
+        if (kvm_enabled()) {
+            if (!kvm_arm_aarch32_supported()) {
+                error_setg(errp, "'aarch64' feature cannot be disabled for KVM "
+                           "because this host does not support 32-bit EL1");
+                return;
+            }
+        } else if (tcg_enabled()) {
+#ifdef CONFIG_USER_ONLY
+            error_setg(errp, "'aarch64' feature cannot be disabled for "
+                       "usermode emulator qemu-aarch64; use qemu-arm instead");
+            return;
+#else
+            bool aa32_at_highest_el;
+            if (arm_feature(&cpu->env, ARM_FEATURE_EL3)) {
+                aa32_at_highest_el = cpu_isar_feature(aa64_aa32_el3, cpu);
+            } else if (arm_feature(&cpu->env, ARM_FEATURE_EL2)) {
+                aa32_at_highest_el = cpu_isar_feature(aa64_aa32_el2, cpu);
+            } else {
+                aa32_at_highest_el = cpu_isar_feature(aa64_aa32_el1, cpu);
+            }
+
+            if (!aa32_at_highest_el) {
+                error_setg(errp, "'aarch64' feature cannot be disabled for "
+                           "this TCG CPU because it does not support 32-bit "
+                           "execution at its highest implemented exception "
+                           "level");
+                return;
+            }
+#endif
+        } else {
+            error_setg(errp, "'aarch64' feature cannot be disabled for "
+                       "this accelerator");
             return;
         }
         unset_feature(&cpu->env, ARM_FEATURE_AARCH64);
diff --git a/tests/qtest/arm-cpu-features.c b/tests/qtest/arm-cpu-features.c
index XXXXXXX..XXXXXXX 100644
--- a/tests/qtest/arm-cpu-features.c
+++ b/tests/qtest/arm-cpu-features.c
@@ -XXX,XX +XXX,XX @@ static void test_query_cpu_model_expansion(const void *data)
         sve_tests_default(qts, "max");
         pauth_tests_default(qts, "max");
 
-        /* Test that features that depend on KVM generate errors without. */
-        assert_error(qts, "max",
-                     "'aarch64' feature cannot be disabled "
-                     "unless KVM is enabled and 32-bit EL1 "
-                     "is supported",
-                     "{ 'aarch64': false }");
+        /* TCG allows us to turn off AArch64 on the 'max' CPU type */
+        assert_set_feature(qts, "max", "aarch64", false);
     }
 
     qtest_quit(qts);
-- 
2.43.0

Add a basic test of the TCG 'aarch64=off' functionality; this is the
same as our existing arm/test_virt test, but it runs the AArch32
guest kernel on qemu-system-aarch64 with -cpu max,aarch64=off.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20260416165353.589569-4-peter.maydell@linaro.org
---
 tests/functional/aarch64/meson.build          |  1 +
 .../aarch64/test_virt_aarch64_off.py          | 37 +++++++++++++++++++
 2 files changed, 38 insertions(+)
 create mode 100755 tests/functional/aarch64/test_virt_aarch64_off.py

diff --git a/tests/functional/aarch64/meson.build b/tests/functional/aarch64/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/tests/functional/aarch64/meson.build
+++ b/tests/functional/aarch64/meson.build
@@ -XXX,XX +XXX,XX @@ tests_aarch64_system_thorough = [
   'tcg_plugins',
   'tuxrun',
   'virt',
+  'virt_aarch64_off',
   'virt_gpu',
   'virt_vbsa',
   'xen',
diff --git a/tests/functional/aarch64/test_virt_aarch64_off.py b/tests/functional/aarch64/test_virt_aarch64_off.py
new file mode 100755
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/tests/functional/aarch64/test_virt_aarch64_off.py
@@ -XXX,XX +XXX,XX @@
+#!/usr/bin/env python3
+#
+# Functional test that boots an AArch32 Linux kernel and checks the console
+# on a TCG aarch64 CPU with aarch64=off. This is the same image etc
+# as we use in tests/functional/arm/test_virt.py.
+#
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+from qemu_test import LinuxKernelTest, Asset
+
+class ArmVirtMachine(LinuxKernelTest):
+
+    ASSET_KERNEL = Asset(
+        ('https://archives.fedoraproject.org/pub/archive/fedora/linux/'
+         'releases/29/Everything/armhfp/os/images/pxeboot/vmlinuz'),
+        '18dd5f1a9a28bd539f9d047f7c0677211bae528e8712b40ca5a229a4ad8e2591')
+
+    def test_arm_virt(self):
+        self.set_machine('virt')
+        # KVM aarch64=off requires a host CPU that supports it, so
+        # restrict the test to TCG only
+        self.require_accelerator('tcg')
+        self.vm.add_args('-cpu', 'max,aarch64=off')
+
+        kernel_path = self.ASSET_KERNEL.fetch()
+
+        self.vm.set_console()
+        kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE +
+                               'console=ttyAMA0')
+        self.vm.add_args('-kernel', kernel_path,
+                         '-append', kernel_command_line)
+        self.vm.launch()
+        console_pattern = 'Kernel command line: %s' % kernel_command_line
+        self.wait_for_console_pattern(console_pattern)
+
+if __name__ == '__main__':
+    LinuxKernelTest.main()
-- 
2.43.0

From: Eric Auger <eric.auger@redhat.com>

We introduce a datatype for a tolerance with respect to a given
cpreg migration issue. The tolerance applies to a given cpreg kvm index,
and can be of different types:
a) mismatch in cpreg indexes
- ToleranceNotOnBothEnds (cpreg index is allowed to be only present
  on one end)
- ToleranceOnlySrcTestValue (cpreg index is allowed to be only
  present in source if its value @mask field matches @value)
b) mismatch in cpreg values
- ToleranceDiffInMask (value differences are allowed only within a mask)
- ToleranceFieldLT (incoming field value must be less than a given value)
- ToleranceFieldGT (incoming field value must be greater than a given value)

A QLIST of such tolerances can be populated using a new helper:
arm_register_cpreg_mig_tolerance() and arm_cpu_match_cpreg_mig_tolerance()
allows to check whether a tolerance exists for a given kvm index and its
criterion is matched.

callers for those helpers will be introduced in subsequent patches.

Only registration of migration tolerances related to cpreg index
mismatch is currently allowed.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20260420140552.104369-2-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu.c       | 82 ++++++++++++++++++++++++++++++++++++++++++
 target/arm/cpu.h       |  1 +
 target/arm/internals.h | 54 ++++++++++++++++++++++++++++
 3 files changed, 137 insertions(+)

diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -XXX,XX +XXX,XX @@ void arm_register_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook,
     QLIST_INSERT_HEAD(&cpu->el_change_hooks, entry, node);
 }
 
+static ARMCPRegMigTolerance *find_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx)
+{
+    ARMCPRegMigTolerance *t;
+    QLIST_FOREACH(t, &cpu->cpreg_mig_tolerances, node) {
+        if (t->kvmidx == kvmidx)  {
+            return t;
+        }
+    }
+    return NULL;
+}
+
+void arm_register_cpreg_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx,
+                                      uint64_t mask, uint64_t value,
+                                      ARMCPRegMigToleranceType type)
+{
+    ARMCPRegMigTolerance *entry;
+
+    /* make sure the kvmidx has not tolerance already registered */
+    assert(!find_mig_tolerance(cpu, kvmidx));
+
+    assert(type == ToleranceNotOnBothEnds ||
+           type == ToleranceOnlySrcTestValue);
+
+    entry = g_new0(ARMCPRegMigTolerance, 1);
+
+    entry->kvmidx = kvmidx;
+    entry->mask = mask;
+    entry->value = value;
+    entry->type = type;
+
+    QLIST_INSERT_HEAD(&cpu->cpreg_mig_tolerances, entry, node);
+}
+
+bool arm_cpu_match_cpreg_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx,
+                                       uint64_t vmstate_value, uint64_t local_value,
+                                       ARMCPRegMigToleranceType type)
+{
+    ARMCPRegMigTolerance *t = find_mig_tolerance(cpu, kvmidx);
+    uint64_t diff, diff_outside_mask, field;
+
+    if (!t || t->type != type) {
+        return false;
+    }
+
+    if (type == ToleranceNotOnBothEnds) {
+        return true;
+    }
+
+    if (type == ToleranceOnlySrcTestValue &&
+        ((vmstate_value & t->mask) == t->value)) {
+        return true;
+    }
+
+    /* Need to check the mask */
+    diff = vmstate_value ^ local_value;
+    diff_outside_mask = diff & ~t->mask;
+
+    if (diff_outside_mask) {
+        /* there are differences outside of the mask */
+        return false;
+    }
+    if (type == ToleranceDiffInMask) {
+        /* differences only in the field, tolerance matched */
+        return true;
+    }
+    /* need to compare field value against authorized ones */
+    field = vmstate_value & t->mask;
+    if (type == ToleranceFieldLT && (field < t->value)) {
+        return true;
+    }
+    if (type == ToleranceFieldGT && (field > t->value)) {
+        return true;
+    }
+    return false;
+}
+
 static void cp_reg_reset(gpointer key, gpointer value, gpointer opaque)
 {
     /* Reset a single ARMCPRegInfo register */
@@ -XXX,XX +XXX,XX @@ static void arm_cpu_initfn(Object *obj)
 
     QLIST_INIT(&cpu->pre_el_change_hooks);
     QLIST_INIT(&cpu->el_change_hooks);
+    QLIST_INIT(&cpu->cpreg_mig_tolerances);
 
 #ifdef CONFIG_USER_ONLY
 # ifdef TARGET_AARCH64
@@ -XXX,XX +XXX,XX @@ static void arm_cpu_finalizefn(Object *obj)
 {
     ARMCPU *cpu = ARM_CPU(obj);
     ARMELChangeHook *hook, *next;
+    ARMCPRegMigTolerance *t, *n;
 
     g_hash_table_destroy(cpu->cp_regs);
 
@@ -XXX,XX +XXX,XX @@ static void arm_cpu_finalizefn(Object *obj)
         QLIST_REMOVE(hook, node);
         g_free(hook);
     }
+    QLIST_FOREACH_SAFE(t, &cpu->cpreg_mig_tolerances, node, n) {
+        QLIST_REMOVE(t, node);
+        g_free(t);
+    }
 #ifndef CONFIG_USER_ONLY
     if (cpu->pmu_timer) {
         timer_free(cpu->pmu_timer);
diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -XXX,XX +XXX,XX @@ struct ArchCPU {
 
     QLIST_HEAD(, ARMELChangeHook) pre_el_change_hooks;
     QLIST_HEAD(, ARMELChangeHook) el_change_hooks;
+    QLIST_HEAD(, ARMCPRegMigTolerance) cpreg_mig_tolerances;
 
     int32_t node_id; /* NUMA node this CPU belongs to */
 
diff --git a/target/arm/internals.h b/target/arm/internals.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/internals.h
+++ b/target/arm/internals.h
@@ -XXX,XX +XXX,XX @@ int compare_u64(const void *a, const void *b);
 /* Used in FEAT_MEC to set the MECIDWidthm1 field in the MECIDR_EL2 register. */
 #define MECID_WIDTH 16
 
+typedef enum {
+    ToleranceNotOnBothEnds,
+    ToleranceOnlySrcTestValue,
+    ToleranceDiffInMask,
+    ToleranceFieldLT,
+    ToleranceFieldGT,
+} ARMCPRegMigToleranceType;
+
+typedef struct ARMCPRegMigTolerance {
+    uint64_t kvmidx;
+    uint64_t mask;
+    uint64_t value;
+    ARMCPRegMigToleranceType type;
+    QLIST_ENTRY(ARMCPRegMigTolerance) node;
+} ARMCPRegMigTolerance;
+
+/**
+ * arm_register_cpreg_mig_tolerance:
+ * Register a migration tolerance wrt one given cpreg identified by its
+ * @kvmidx. Calling this function twice for the same @kvmidx is a
+ * programming error and will cause an assertion failure.
+ *
+ * @cpu: vcpu to apply the migration tolerance on
+ * @kvmidx: kvm index of the cpreg the tolerance applies to
+ * @mask: bitmask where a difference is tolerated
+ *        (relevant with ToleranceDiffInMask)
+ * @value: value the bitmask field is compared with
+ *        (relevant with ToleranceFieldLT and ToleranceFieldGT)
+ * @type: type of the migration tolerance:
+ * - ToleranceNotOnBothEnds (cpreg index is allowed to be only present
+ *   on one end)
+ * - ToleranceOnlySrcTestValue (cpreg index is allowed to be only
+ *   present in source if its value @mask field matches @value)
+ * - ToleranceDiffInMask (mismatch in cpreg values are only tolerated
+ *   if differences are within @mask)
+ * - ToleranceFieldLT (mismatch in cpreg values are only tolerated
+ *   if incoming @bitmask field value is less than @value)
+ * - ToleranceFieldGT (mismatch in cpreg values are only tolerated
+ *   if incoming @bitmask field value is greater than @value)
+ */
+void arm_register_cpreg_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx,
+                                      uint64_t mask, uint64_t value,
+                                      ARMCPRegMigToleranceType type);
+
+/**
+ * arm_cpu_match_cpreg_mig_tolerance:
+ * Check whether a tolerance of type @type exists for a given @kvmidx
+ * and the tolerance criterion is satisfied
+ */
+bool arm_cpu_match_cpreg_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx,
+                                       uint64_t vmstate_value, uint64_t local_value,
+                                       ARMCPRegMigToleranceType type);
+
+
 #endif
-- 
2.43.0

From: Eric Auger <eric.auger@redhat.com>

If there is a mismatch between the cpreg indexes found on both ends,
check whether a tolerance was registered for the given kvmidx. If any,
silence warning/errors.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20260420140552.104369-3-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/machine.c    | 21 +++++++++++++++------
 target/arm/trace-events |  2 ++
 2 files changed, 17 insertions(+), 6 deletions(-)

diff --git a/target/arm/machine.c b/target/arm/machine.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/machine.c
+++ b/target/arm/machine.c
@@ -XXX,XX +XXX,XX @@ static void handle_cpreg_missing_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx
 {
     g_autofree gchar *name = print_register_name(kvmidx);
 
+    if (arm_cpu_match_cpreg_mig_tolerance(cpu, kvmidx,
+                                          0, 0, ToleranceNotOnBothEnds)) {
+        trace_tolerate_cpreg_missing_in_incoming_stream(name);
+        return;
+    }
     warn_report("%s: %s "
                 "expected by the destination but not in the incoming stream: "
                  "skip it", __func__, name);
 }
 
 /*
- * Handle the situation where @kvmidx is in the incoming stream
- * but not on destination. This currently fails the migration but
- * we plan to accomodate some exceptions, hence the boolean returned value.
+ * Handle the situation where @kvmidx is in the incoming
+ * stream but not on destination. This fails the migration if
+ * no cpreg mig tolerance is matched for this @kvmidx
+ * Return true if the migration should eventually fail
  */
 static bool handle_cpreg_only_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx)
 {
     g_autofree gchar *name = print_register_name(kvmidx);
-    bool fail = true;
 
+    if (arm_cpu_match_cpreg_mig_tolerance(cpu, kvmidx,
+                                          0, 0, ToleranceNotOnBothEnds)) {
+        trace_tolerate_cpreg_only_in_incoming_stream(name);
+        return false;
+    }
     error_report("%s: %s in the incoming stream but unknown on the "
                  "destination: fail migration", __func__, name);
-
-    return fail;
+    return true;
 }
 
 static int cpu_post_load(void *opaque, int version_id)
diff --git a/target/arm/trace-events b/target/arm/trace-events
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/trace-events
+++ b/target/arm/trace-events
@@ -XXX,XX +XXX,XX @@ arm_psci_call(uint64_t x0, uint64_t x1, uint64_t x2, uint64_t x3, uint32_t cpuid
 
 # machine.c
 cpu_post_load(uint32_t cpreg_vmstate_array_len, uint32_t cpreg_array_len) "cpreg_vmstate_array_len=%d cpreg_array_len=%d"
+tolerate_cpreg_missing_in_incoming_stream(char *name) "%s is missing in incoming stream but this is explicitly tolerated"
+tolerate_cpreg_only_in_incoming_stream(char *name) "%s is in incoming stream but not on destination but this is explicitly tolerated"
-- 
2.43.0

From: Eric Auger <eric.auger@redhat.com>

Pass the value of the incoming register to
handle_cpreg_only_in_incoming_stream and check whether there is
a matching ToleranceOnlySrcTestValue tolerance.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20260420140552.104369-4-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/machine.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/target/arm/machine.c b/target/arm/machine.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/machine.c
+++ b/target/arm/machine.c
@@ -XXX,XX +XXX,XX @@ static void handle_cpreg_missing_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx
  * no cpreg mig tolerance is matched for this @kvmidx
  * Return true if the migration should eventually fail
  */
-static bool handle_cpreg_only_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx)
+static bool
+handle_cpreg_only_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx, uint64_t value)
 {
     g_autofree gchar *name = print_register_name(kvmidx);
 
     if (arm_cpu_match_cpreg_mig_tolerance(cpu, kvmidx,
-                                          0, 0, ToleranceNotOnBothEnds)) {
+                                          0, 0, ToleranceNotOnBothEnds) ||
+        arm_cpu_match_cpreg_mig_tolerance(cpu, kvmidx,
+                                          value, 0, ToleranceOnlySrcTestValue)) {
         trace_tolerate_cpreg_only_in_incoming_stream(name);
         return false;
     }
@@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id)
         }
         if (cpu->cpreg_vmstate_indexes[v] < cpu->cpreg_indexes[i]) {
             fail = handle_cpreg_only_in_incoming_stream(cpu,
-                                                        cpu->cpreg_vmstate_indexes[v++]);
+                                                        cpu->cpreg_vmstate_indexes[v],
+                                                        cpu->cpreg_vmstate_values[v]);
+            v++;
             continue;
         }
         /* matching register, copy the value over */
@@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id)
      */
     for ( ; v < cpu->cpreg_vmstate_array_len; v++) {
         fail = handle_cpreg_only_in_incoming_stream(cpu,
-                                                    cpu->cpreg_vmstate_indexes[v]);
+                                                    cpu->cpreg_vmstate_indexes[v],
+                                                    cpu->cpreg_vmstate_values[v]);
     }
     if (fail) {
         return -1;
-- 
2.43.0

From: Eric Auger <eric.auger@redhat.com>

Before linux v6.13 those registers were erroneously unconditionally
exposed and this was fixed by commits:
- 0fcb4eea5345 ("KVM: arm64: Hide TCR2_EL1 from userspace when
                 disabled for guests")
- a68cddbe47ef ("KVM: arm64: Hide S1PIE registers from userspace
                 when disabled for guests")
in v6.13.

This means if we migrate from an old kernel host to a >= 6.13 kernel
host, migration currently fails.

Declare cpreg migration tolerance for those registers.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20260420140552.104369-5-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu64.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu64.c
+++ b/target/arm/cpu64.c
@@ -XXX,XX +XXX,XX @@ static void aarch64_a53_initfn(Object *obj)
     define_cortex_a72_a57_a53_cp_reginfo(cpu);
 }
 
+#if defined(CONFIG_KVM)
+static void kvm_arm_set_cpreg_mig_tolerances(ARMCPU *cpu)
+{
+    /*
+     * Registers that may be in the incoming stream and not exposed
+     * on the destination
+     */
+
+    /*
+     * TCR_EL1 was erroneously unconditionnally exposed before linux v6.13.
+     * See commit 0fcb4eea5345 ("KVM: arm64: Hide TCR2_EL1 from userspace
+     * when disabled for guests")
+     */
+    arm_register_cpreg_mig_tolerance(cpu, ARM64_SYS_REG(3, 0, 2, 0, 3),
+                                     0, 0, ToleranceNotOnBothEnds);
+    /*
+     * PIRE0_EL1 and PIR_EL1 were erroneously unconditionnally exposed
+     * before linux v6.13. See commit a68cddbe47ef ("KVM: arm64: Hide
+     * S1PIE registers from userspace when disabled for guests")
+     */
+    arm_register_cpreg_mig_tolerance(cpu, ARM64_SYS_REG(3, 0, 10, 2, 2),
+                                     0, 0, ToleranceNotOnBothEnds);
+    arm_register_cpreg_mig_tolerance(cpu, ARM64_SYS_REG(3, 0, 10, 2, 3),
+                                     0, 0, ToleranceNotOnBothEnds);
+}
+#endif
+
 static void aarch64_host_initfn(Object *obj)
 {
     ARMCPU *cpu = ARM_CPU(obj);
@@ -XXX,XX +XXX,XX @@ static void aarch64_host_initfn(Object *obj)
 #endif
 
 #if defined(CONFIG_KVM)
+    kvm_arm_set_cpreg_mig_tolerances(cpu);
     kvm_arm_set_cpu_features_from_host(cpu);
     aarch64_add_sve_properties(obj);
 #elif defined(CONFIG_HVF)
-- 
2.43.0

From: Eric Auger <eric.auger@redhat.com>

KVM_REG_ARM_VENDOR_HYP_BMAP_2 pseudo FW register is exposed
from v6.15 onwards. Backward migration from a >= v6.15 to an older
kernel would fail without cpreg migration tolerance definition
for this register. If the register is present on source but not
on destination, its value must be checked to make sure it matches
the reset value, ie. 0, meaning no service is exposed to the guest,
hence the choice of a ToleranceOnlySrcTestValue migration
tolerance.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20260420140552.104369-6-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu64.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu64.c
+++ b/target/arm/cpu64.c
@@ -XXX,XX +XXX,XX @@ static void kvm_arm_set_cpreg_mig_tolerances(ARMCPU *cpu)
                                      0, 0, ToleranceNotOnBothEnds);
     arm_register_cpreg_mig_tolerance(cpu, ARM64_SYS_REG(3, 0, 10, 2, 3),
                                      0, 0, ToleranceNotOnBothEnds);
+
+    /*
+     * KVM_REG_ARM_VENDOR_HYP_BMAP_2 pseudo FW register is exposed
+     * from v6.15 onwards. Backward migration from a >= v6.15 to an older
+     * kernel would fail without cpreg migration tolerance definition.
+     * If the register is present on source but not on destination, make
+     * sure it has its reset value, ie. 0, meaning no service is exposed
+     * to the guest.
+     */
+    arm_register_cpreg_mig_tolerance(cpu, KVM_REG_ARM_FW_FEAT_BMAP_REG(3),
+                                     UINT64_MAX, 0, ToleranceOnlySrcTestValue);
 }
 #endif
 
-- 
2.43.0

From: Eric Auger <eric.auger@redhat.com>

We want to remove AArch32 DBGDTRTX which was erroneously exposed.
This was attempted by 655659a74a36b ("target/arm: Correct encoding
of Debug Communications Channel registers") but it was discovered
that the removal of this debug register broke forward migration on
TCG. Now we have the cpreg migration tolerance infrastructure, we
can declare one for the DBGDTRTX. This allow to revert the reinstate
patch.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20260420140552.104369-7-eric.auger@redhat.com
[PMM: revised comment, included note about when we can drop
 the workaround]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/helper.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/target/arm/helper.c b/target/arm/helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu)
             .fgt = FGT_CLIDR_EL1,
             .resetvalue = GET_IDREG(isar, CLIDR)
         };
+        uint64_t dbgtr_el0_kvmidx =
+            cpreg_to_kvm_id(ENCODE_CP_REG(14, 0, 1, 0, 5, 3, 0));
+
         define_one_arm_cp_reg(cpu, &clidr);
         define_arm_cp_regs(cpu, v7_cp_reginfo);
         define_debug_regs(cpu);
+        /*
+         * We used to incorrectly expose a non-existent AArch32 "DBGDTRTX"
+         * register with this encoding. This has been fixed by commit
+         * 655659a74a36 ("target/arm: Correct encoding of Debug
+         * Communications Channel registers") by the introduction of correct
+         * separate cpreg definitions for AA64 and AA32 versions. However,
+         * the old cpreg definition couldn't be removed without breaking
+         * migration, so commit 4f2b82f604 reinstated the bogus encoding
+         * for migration data only.
+         *
+         * Now that we have migration tolerance infrastructure, we can use
+         * this to allow forward migration from the buggy QEMU versions,
+         * accepting and ignoring the bogus register if it is in the
+         * source data. QEMU 11.0 was the last version that sent the
+         * bogus encoding, so this workaround can be removed at the point
+         * where we no longer care about migration from that version
+         * (i.e. when we remove the "virt-11.0" machine type).
+         */
+        arm_register_cpreg_mig_tolerance(cpu, dbgtr_el0_kvmidx,
+                                         0, 0, ToleranceNotOnBothEnds);
     } else {
         define_arm_cp_regs(cpu, not_v7_cp_reginfo);
     }
-- 
2.43.0

From: Eric Auger <eric.auger@redhat.com>

This reverts commit 4f2b82f60431 ("target/arm: Reinstate bogus AArch32
DBGDTRTX register for migration compat). We don't need that commit
anymore as the AArch32 DBGDTRTX register is declared to
be safe to ignore in the incoming migration stream.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20260420140552.104369-8-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/debug_helper.c | 29 -----------------------------
 1 file changed, 29 deletions(-)

diff --git a/target/arm/debug_helper.c b/target/arm/debug_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/debug_helper.c
+++ b/target/arm/debug_helper.c
@@ -XXX,XX +XXX,XX @@ static void dbgclaimclr_write(CPUARMState *env, const ARMCPRegInfo *ri,
     env->cp15.dbgclaim &= ~(value & 0xFF);
 }
 
-static CPAccessResult access_bogus(CPUARMState *env, const ARMCPRegInfo *ri,
-                                   bool isread)
-{
-    /* Always UNDEF, as if this cpreg didn't exist */
-    return CP_ACCESS_UNDEFINED;
-}
-
 static const ARMCPRegInfo debug_cp_reginfo[] = {
     /*
      * DBGDRAR, DBGDSAR: always RAZ since we don't implement memory mapped
@@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo debug_cp_reginfo[] = {
       .opc0 = 2, .opc1 = 3, .crn = 0, .crm = 4, .opc2 = 0,
       .access = PL0_RW, .accessfn = access_tdcc,
       .type = ARM_CP_CONST, .resetvalue = 0 },
-    /*
-     * This is not a real AArch32 register. We used to incorrectly expose
-     * this due to a QEMU bug; to avoid breaking migration compatibility we
-     * need to continue to provide it so that we don't fail the inbound
-     * migration when it tells us about a sysreg that we don't have.
-     * We set an always-fails .accessfn, which means that the guest doesn't
-     * actually see this register (it will always UNDEF, identically to if
-     * there were no cpreg definition for it other than that we won't print
-     * a LOG_UNIMP message about it), and we set the ARM_CP_NO_GDB flag so the
-     * gdbstub won't see it either.
-     * (We can't just set .access = 0, because add_cpreg_to_hashtable()
-     * helpfully ignores cpregs which aren't accessible to the highest
-     * implemented EL.)
-     *
-     * TODO: implement a system for being able to describe "this register
-     * can be ignored if it appears in the inbound stream"; then we can
-     * remove this temporary hack.
-     */
-    { .name = "BOGUS_DBGDTR_EL0", .state = ARM_CP_STATE_AA32,
-      .cp = 14, .opc1 = 3, .crn = 0, .crm = 5, .opc2 = 0,
-      .access = PL0_RW, .accessfn = access_bogus,
-      .type = ARM_CP_CONST | ARM_CP_NO_GDB, .resetvalue = 0 },
     /*
      * OSECCR_EL1 provides a mechanism for an operating system
      * to access the contents of EDECCR. EDECCR is not implemented though,
-- 
2.43.0

From: Osama Abdelkader <osama.abdelkader@gmail.com>

fdt_node_offset_by_compatible(fdt, -1, compat) only finds the first match.
If the blob has more than one node with the same compatible string, extra
nodes will remain active. Remove all the matching nodes, using the same
loop as imx8mp-evk.c does for this purpose.

Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Message-id: 20260420162114.308519-1-osama.abdelkader@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/raspi4b.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/hw/arm/raspi4b.c b/hw/arm/raspi4b.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/raspi4b.c
+++ b/hw/arm/raspi4b.c
@@ -XXX,XX +XXX,XX @@ static void raspi4_modify_dtb(const struct arm_boot_info *info, void *fdt)
 
     for (int i = 0; i < ARRAY_SIZE(nodes_to_remove); i++) {
         const char *dev_str = nodes_to_remove[i];
+        int offset;
 
-        int offset = fdt_node_offset_by_compatible(fdt, -1, dev_str);
-        if (offset >= 0) {
-            if (!fdt_nop_node(fdt, offset)) {
-                warn_report("bcm2711 dtc: %s has been disabled!", dev_str);
+        offset = fdt_node_offset_by_compatible(fdt, -1, dev_str);
+        while (offset >= 0) {
+            if (fdt_nop_node(fdt, offset) == 0) {
+                warn_report("bcm2711 dtb: %s has been disabled!", dev_str);
             }
+            offset = fdt_node_offset_by_compatible(fdt, offset, dev_str);
         }
     }
 
-- 
2.43.0

From: Yucai Liu <1486344514@qq.com>

Implement a basic i.MX6UL LCDIF controller model with MMIO registers,
frame-done interrupt behavior, and framebuffer-backed display updates
for RGB565 and XRGB8888 input formats.

Place the LCDIF device under hw/display and build it via a dedicated
CONFIG_IMX6UL_LCDIF symbol. Model register fields with
registerfields.h helpers and provide migration support via vmstate.

Signed-off-by: Yucai Liu <1486344514@qq.com>
Message-id: 20260412110240.93116-2-yangyanglan718@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 MAINTAINERS                       |   2 +
 hw/display/Kconfig                |   4 +
 hw/display/imx6ul_lcdif.c         | 453 ++++++++++++++++++++++++++++++
 hw/display/meson.build            |   1 +
 include/hw/display/imx6ul_lcdif.h |  37 +++
 5 files changed, 497 insertions(+)
 create mode 100644 hw/display/imx6ul_lcdif.c
 create mode 100644 include/hw/display/imx6ul_lcdif.h

diff --git a/MAINTAINERS b/MAINTAINERS
index XXXXXXX..XXXXXXX 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -XXX,XX +XXX,XX @@ L: qemu-arm@nongnu.org
 S: Odd Fixes
 F: hw/arm/mcimx6ul-evk.c
 F: hw/arm/fsl-imx6ul.c
+F: hw/display/imx6ul_lcdif.c
 F: hw/misc/imx6ul_ccm.c
 F: include/hw/arm/fsl-imx6ul.h
+F: include/hw/display/imx6ul_lcdif.h
 F: include/hw/misc/imx6ul_ccm.h
 F: docs/system/arm/mcimx6ul-evk.rst
 
diff --git a/hw/display/Kconfig b/hw/display/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/display/Kconfig
+++ b/hw/display/Kconfig
@@ -XXX,XX +XXX,XX @@ config PL110
     bool
     select FRAMEBUFFER
 
+config IMX6UL_LCDIF
+    bool
+    select FRAMEBUFFER
+
 config SII9022
     bool
     depends on I2C
diff --git a/hw/display/imx6ul_lcdif.c b/hw/display/imx6ul_lcdif.c
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/hw/display/imx6ul_lcdif.c
@@ -XXX,XX +XXX,XX @@
+/*
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * i.MX6UL LCDIF controller
+ *
+ * Copyright (c) 2026 Yucai Liu <1486344514@qq.com>
+ */
+
+#include "qemu/osdep.h"
+#include "hw/display/imx6ul_lcdif.h"
+#include "hw/core/irq.h"
+#include "hw/core/registerfields.h"
+#include "hw/display/framebuffer.h"
+#include "migration/vmstate.h"
+#include "system/address-spaces.h"
+#include "qemu/module.h"
+#include "qemu/units.h"
+#include "ui/pixel_ops.h"
+
+#define LCDIF_MMIO_SIZE             (16 * KiB)
+#define LCDIF_RESET_CTRL1           0x000f0000
+
+REG32(CTRL, 0x00)
+    FIELD(CTRL, RUN, 0, 1)
+    FIELD(CTRL, WORD_LENGTH, 8, 2)
+REG32(CTRL1, 0x10)
+    FIELD(CTRL1, CUR_FRAME_DONE_IRQ, 9, 1)
+    FIELD(CTRL1, CUR_FRAME_DONE_IRQ_EN, 13, 1)
+    FIELD(CTRL1, BYTE_PACKING_FORMAT, 16, 4)
+REG32(V4_TRANSFER_COUNT, 0x30)
+    FIELD(V4_TRANSFER_COUNT, H_COUNT, 0, 16)
+    FIELD(V4_TRANSFER_COUNT, V_COUNT, 16, 16)
+REG32(V4_CUR_BUF, 0x40)
+REG32(V4_NEXT_BUF, 0x50)
+REG32(AS_NEXT_BUF, 0x230)
+
+#define REG_SET                     0x4
+#define REG_CLR                     0x8
+#define REG_TOG                     0xc
+
+#define CTRL_WORD_LENGTH_16         0
+#define CTRL_WORD_LENGTH_24         3
+
+#define FRAME_PERIOD_NS             (16 * 1000 * 1000ULL)
+
+enum IMX6ULLCDIFReg {
+    IMX6UL_LCDIF_REG_CTRL = A_CTRL >> 4,
+    IMX6UL_LCDIF_REG_CTRL1 = A_CTRL1 >> 4,
+    IMX6UL_LCDIF_REG_V4_TRANSFER_COUNT = A_V4_TRANSFER_COUNT >> 4,
+    IMX6UL_LCDIF_REG_V4_CUR_BUF = A_V4_CUR_BUF >> 4,
+    IMX6UL_LCDIF_REG_V4_NEXT_BUF = A_V4_NEXT_BUF >> 4,
+    IMX6UL_LCDIF_REG_AS_NEXT_BUF = A_AS_NEXT_BUF >> 4,
+};
+
+static inline bool imx6ul_lcdif_reg_exists(hwaddr reg)
+{
+    return (reg >> 4) < IMX6UL_LCDIF_REGS_NUM;
+}
+
+static inline bool imx6ul_lcdif_reg_has_setclr(hwaddr reg)
+{
+    switch (reg) {
+    case A_CTRL:
+    case A_CTRL1:
+        return true;
+    default:
+        return false;
+    }
+}
+
+static inline bool imx6ul_lcdif_is_running(IMX6ULLCDIFState *s)
+{
+    uint32_t ctrl = s->regs[IMX6UL_LCDIF_REG_CTRL];
+
+    return FIELD_EX32(ctrl, CTRL, RUN);
+}
+
+static inline bool imx6ul_lcdif_frame_done_pending(IMX6ULLCDIFState *s)
+{
+    uint32_t ctrl1 = s->regs[IMX6UL_LCDIF_REG_CTRL1];
+
+    return FIELD_EX32(ctrl1, CTRL1, CUR_FRAME_DONE_IRQ);
+}
+
+static void imx6ul_lcdif_schedule_frame(IMX6ULLCDIFState *s)
+{
+    int64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+
+    timer_mod(s->frame_timer, now + FRAME_PERIOD_NS);
+}
+
+static void imx6ul_lcdif_maybe_schedule_frame(IMX6ULLCDIFState *s)
+{
+    if (imx6ul_lcdif_is_running(s) && !imx6ul_lcdif_frame_done_pending(s)) {
+        imx6ul_lcdif_schedule_frame(s);
+    } else {
+        timer_del(s->frame_timer);
+    }
+}
+
+static void imx6ul_lcdif_update_irq(IMX6ULLCDIFState *s)
+{
+    uint32_t ctrl1 = s->regs[IMX6UL_LCDIF_REG_CTRL1];
+    bool level = FIELD_EX32(ctrl1, CTRL1, CUR_FRAME_DONE_IRQ_EN) &&
+                 FIELD_EX32(ctrl1, CTRL1, CUR_FRAME_DONE_IRQ);
+
+    qemu_set_irq(s->irq, level);
+}
+
+static void imx6ul_lcdif_frame_done(IMX6ULLCDIFState *s)
+{
+    uint32_t ctrl1 = s->regs[IMX6UL_LCDIF_REG_CTRL1];
+
+    ctrl1 = FIELD_DP32(ctrl1, CTRL1, CUR_FRAME_DONE_IRQ, 1);
+    s->regs[IMX6UL_LCDIF_REG_CTRL1] = ctrl1;
+    imx6ul_lcdif_update_irq(s);
+}
+
+static void imx6ul_lcdif_draw_line_rgb565(void *opaque, uint8_t *dst,
+                                          const uint8_t *src, int width,
+                                          int dststep)
+{
+    uint32_t *dst32 = (uint32_t *)dst;
+    int i;
+
+    for (i = 0; i < width; i++) {
+        uint16_t pixel = lduw_le_p(src);
+        uint8_t r = ((pixel >> 11) & 0x1f) << 3;
+        uint8_t g = ((pixel >> 5) & 0x3f) << 2;
+        uint8_t b = (pixel & 0x1f) << 3;
+
+        *dst32++ = rgb_to_pixel32(r, g, b);
+        src += 2;
+    }
+}
+
+static void imx6ul_lcdif_draw_line_xrgb8888(void *opaque, uint8_t *dst,
+                                            const uint8_t *src, int width,
+                                            int dststep)
+{
+    uint32_t *dst32 = (uint32_t *)dst;
+    int i;
+
+    for (i = 0; i < width; i++) {
+        uint32_t pixel = ldl_le_p(src);
+        uint8_t r = (pixel >> 16) & 0xff;
+        uint8_t g = (pixel >> 8) & 0xff;
+        uint8_t b = pixel & 0xff;
+
+        *dst32++ = rgb_to_pixel32(r, g, b);
+        src += 4;
+    }
+}
+
+static void imx6ul_lcdif_update_display(void *opaque)
+{
+    IMX6ULLCDIFState *s = opaque;
+    DisplaySurface *surface = qemu_console_surface(s->con);
+    uint32_t transfer_count = s->regs[IMX6UL_LCDIF_REG_V4_TRANSFER_COUNT];
+    uint32_t width = FIELD_EX32(transfer_count, V4_TRANSFER_COUNT, H_COUNT);
+    uint32_t height = FIELD_EX32(transfer_count, V4_TRANSFER_COUNT, V_COUNT);
+    uint32_t ctrl = s->regs[IMX6UL_LCDIF_REG_CTRL];
+    uint32_t frame_base = s->regs[IMX6UL_LCDIF_REG_V4_CUR_BUF];
+    drawfn fn;
+    int first = 0;
+    int last = 0;
+    int src_width;
+
+    if (!imx6ul_lcdif_is_running(s) || width == 0 || height == 0) {
+        return;
+    }
+
+    switch (FIELD_EX32(ctrl, CTRL, WORD_LENGTH)) {
+    case CTRL_WORD_LENGTH_16:
+        s->src_bpp = 2;
+        fn = imx6ul_lcdif_draw_line_rgb565;
+        break;
+    case CTRL_WORD_LENGTH_24:
+        s->src_bpp = 4;
+        fn = imx6ul_lcdif_draw_line_xrgb8888;
+        break;
+    default:
+        return;
+    }
+
+    if (surface_width(surface) != width || surface_height(surface) != height) {
+        qemu_console_resize(s->con, width, height);
+        surface = qemu_console_surface(s->con);
+        s->invalidate = true;
+    }
+
+    src_width = width * s->src_bpp;
+    if (s->invalidate || s->fb_base != frame_base ||
+        s->src_width != src_width || s->rows != height) {
+        framebuffer_update_memory_section(&s->fbsection, get_system_memory(),
+                                          frame_base, height, src_width);
+        s->fb_base = frame_base;
+        s->src_width = src_width;
+        s->rows = height;
+    }
+
+    framebuffer_update_display(surface, &s->fbsection, width, height,
+                               src_width, surface_stride(surface), 0,
+                               s->invalidate, fn, s, &first, &last);
+    if (first >= 0) {
+        dpy_gfx_update(s->con, 0, first, width, last - first + 1);
+    }
+
+    s->invalidate = false;
+}
+
+static void imx6ul_lcdif_invalidate_display(void *opaque)
+{
+    IMX6ULLCDIFState *s = opaque;
+
+    s->invalidate = true;
+}
+
+static const GraphicHwOps imx6ul_lcdif_graphic_ops = {
+    .invalidate = imx6ul_lcdif_invalidate_display,
+    .gfx_update = imx6ul_lcdif_update_display,
+};
+
+static void imx6ul_lcdif_frame_timer_cb(void *opaque)
+{
+    IMX6ULLCDIFState *s = opaque;
+
+    if (!imx6ul_lcdif_is_running(s) || imx6ul_lcdif_frame_done_pending(s)) {
+        return;
+    }
+
+    imx6ul_lcdif_frame_done(s);
+}
+
+static uint64_t imx6ul_lcdif_read(void *opaque, hwaddr offset, unsigned size)
+{
+    IMX6ULLCDIFState *s = opaque;
+    hwaddr reg = offset & ~0xf;
+    uint32_t idx;
+
+    assert(size == 4);
+    assert(!(offset & 0x3));
+    assert(offset < LCDIF_MMIO_SIZE);
+
+    idx = reg >> 4;
+    if (idx >= ARRAY_SIZE(s->regs)) {
+        return 0;
+    }
+
+    return s->regs[idx];
+}
+
+static void imx6ul_lcdif_write(void *opaque, hwaddr offset,
+                               uint64_t value, unsigned size)
+{
+    IMX6ULLCDIFState *s = opaque;
+    hwaddr reg = offset & ~0xf;
+    uint32_t idx;
+    uint32_t oldv;
+
+    assert(size == 4);
+    assert(!(offset & 0x3));
+    assert(offset < LCDIF_MMIO_SIZE);
+
+    if (!imx6ul_lcdif_reg_exists(reg)) {
+        return;
+    }
+
+    idx = reg >> 4;
+    oldv = s->regs[idx];
+
+    switch (offset & 0xf) {
+    case 0:
+        s->regs[idx] = (uint32_t)value;
+        break;
+    case REG_SET:
+        if (!imx6ul_lcdif_reg_has_setclr(reg)) {
+            return;
+        }
+        s->regs[idx] = oldv | (uint32_t)value;
+        break;
+    case REG_CLR:
+        if (!imx6ul_lcdif_reg_has_setclr(reg)) {
+            return;
+        }
+        s->regs[idx] = oldv & ~(uint32_t)value;
+        break;
+    case REG_TOG:
+        if (!imx6ul_lcdif_reg_has_setclr(reg)) {
+            return;
+        }
+        s->regs[idx] = oldv ^ (uint32_t)value;
+        break;
+    default:
+        g_assert_not_reached();
+    }
+
+    switch (reg) {
+    case A_CTRL:
+        if (!FIELD_EX32(oldv, CTRL, RUN) &&
+            FIELD_EX32(s->regs[idx], CTRL, RUN)) {
+            s->invalidate = true;
+            graphic_hw_invalidate(s->con);
+            imx6ul_lcdif_maybe_schedule_frame(s);
+            break;
+        }
+        if (FIELD_EX32(oldv, CTRL, RUN) &&
+            !FIELD_EX32(s->regs[idx], CTRL, RUN)) {
+            timer_del(s->frame_timer);
+        }
+        break;
+    case A_CTRL1:
+        if (FIELD_EX32(oldv, CTRL1, CUR_FRAME_DONE_IRQ) &&
+            !FIELD_EX32(s->regs[idx], CTRL1, CUR_FRAME_DONE_IRQ)) {
+            imx6ul_lcdif_maybe_schedule_frame(s);
+        }
+        break;
+    case A_V4_TRANSFER_COUNT:
+        s->invalidate = true;
+        graphic_hw_invalidate(s->con);
+        break;
+    case A_V4_CUR_BUF:
+        s->invalidate = true;
+        graphic_hw_invalidate(s->con);
+        break;
+    case A_V4_NEXT_BUF:
+        s->regs[IMX6UL_LCDIF_REG_V4_CUR_BUF] = s->regs[idx];
+        imx6ul_lcdif_frame_done(s);
+        s->invalidate = true;
+        graphic_hw_invalidate(s->con);
+        imx6ul_lcdif_maybe_schedule_frame(s);
+        return;
+    case A_AS_NEXT_BUF:
+        imx6ul_lcdif_frame_done(s);
+        imx6ul_lcdif_maybe_schedule_frame(s);
+        return;
+    default:
+        break;
+    }
+
+    imx6ul_lcdif_update_irq(s);
+}
+
+static const MemoryRegionOps imx6ul_lcdif_ops = {
+    .read = imx6ul_lcdif_read,
+    .write = imx6ul_lcdif_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .valid = {
+        .min_access_size = 4,
+        .max_access_size = 4,
+        .unaligned = false,
+    },
+};
+
+static void imx6ul_lcdif_reset(DeviceState *dev)
+{
+    IMX6ULLCDIFState *s = IMX6UL_LCDIF(dev);
+
+    memset(s->regs, 0, sizeof(s->regs));
+    s->regs[IMX6UL_LCDIF_REG_CTRL1] = LCDIF_RESET_CTRL1;
+    s->fb_base = 0;
+    s->src_width = 0;
+    s->rows = 0;
+    s->src_bpp = 0;
+    s->invalidate = true;
+    timer_del(s->frame_timer);
+    imx6ul_lcdif_update_irq(s);
+}
+
+static int imx6ul_lcdif_post_load(void *opaque, int version_id)
+{
+    IMX6ULLCDIFState *s = opaque;
+
+    s->fb_base = 0;
+    s->src_width = 0;
+    s->rows = 0;
+    s->src_bpp = 0;
+    s->invalidate = true;
+
+    imx6ul_lcdif_update_irq(s);
+    if (imx6ul_lcdif_is_running(s) &&
+        !imx6ul_lcdif_frame_done_pending(s) &&
+        !timer_pending(s->frame_timer)) {
+        imx6ul_lcdif_schedule_frame(s);
+    }
+
+    return 0;
+}
+
+static const VMStateDescription vmstate_imx6ul_lcdif = {
+    .name = TYPE_IMX6UL_LCDIF,
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .post_load = imx6ul_lcdif_post_load,
+    .fields = (const VMStateField[]) {
+        VMSTATE_UINT32_ARRAY(regs, IMX6ULLCDIFState, IMX6UL_LCDIF_REGS_NUM),
+        VMSTATE_TIMER_PTR(frame_timer, IMX6ULLCDIFState),
+        VMSTATE_END_OF_LIST()
+    },
+};
+
+static void imx6ul_lcdif_realize(DeviceState *dev, Error **errp)
+{
+    IMX6ULLCDIFState *s = IMX6UL_LCDIF(dev);
+
+    s->frame_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL,
+                                  imx6ul_lcdif_frame_timer_cb, s);
+    s->invalidate = true;
+    memory_region_init_io(&s->iomem, OBJECT(dev), &imx6ul_lcdif_ops, s,
+                          TYPE_IMX6UL_LCDIF, LCDIF_MMIO_SIZE);
+    sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->iomem);
+    sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq);
+    s->con = graphic_console_init(dev, 0, &imx6ul_lcdif_graphic_ops, s);
+}
+
+static void imx6ul_lcdif_unrealize(DeviceState *dev)
+{
+    IMX6ULLCDIFState *s = IMX6UL_LCDIF(dev);
+
+    timer_del(s->frame_timer);
+    timer_free(s->frame_timer);
+    s->frame_timer = NULL;
+
+    if (s->con) {
+        graphic_console_close(s->con);
+        s->con = NULL;
+    }
+}
+
+static void imx6ul_lcdif_class_init(ObjectClass *klass, const void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->realize = imx6ul_lcdif_realize;
+    dc->unrealize = imx6ul_lcdif_unrealize;
+    dc->vmsd = &vmstate_imx6ul_lcdif;
+    device_class_set_legacy_reset(dc, imx6ul_lcdif_reset);
+    dc->desc = "i.MX6UL LCDIF";
+}
+
+static const TypeInfo imx6ul_lcdif_info = {
+    .name = TYPE_IMX6UL_LCDIF,
+    .parent = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(IMX6ULLCDIFState),
+    .class_init = imx6ul_lcdif_class_init,
+};
+
+static void imx6ul_lcdif_register_types(void)
+{
+    type_register_static(&imx6ul_lcdif_info);
+}
+
+type_init(imx6ul_lcdif_register_types)
diff --git a/hw/display/meson.build b/hw/display/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/hw/display/meson.build
+++ b/hw/display/meson.build
@@ -XXX,XX +XXX,XX @@ system_ss.add(when: ['CONFIG_VGA_CIRRUS', 'CONFIG_VGA_ISA'], if_true: files('cir
 system_ss.add(when: 'CONFIG_G364FB', if_true: files('g364fb.c'))
 system_ss.add(when: 'CONFIG_JAZZ_LED', if_true: files('jazz_led.c'))
 system_ss.add(when: 'CONFIG_PL110', if_true: files('pl110.c'))
+system_ss.add(when: 'CONFIG_IMX6UL_LCDIF', if_true: files('imx6ul_lcdif.c'))
 system_ss.add(when: 'CONFIG_SII9022', if_true: files('sii9022.c'))
 system_ss.add(when: 'CONFIG_SSD0303', if_true: files('ssd0303.c'))
 system_ss.add(when: 'CONFIG_SSD0323', if_true: files('ssd0323.c'))
diff --git a/include/hw/display/imx6ul_lcdif.h b/include/hw/display/imx6ul_lcdif.h
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/include/hw/display/imx6ul_lcdif.h
@@ -XXX,XX +XXX,XX @@
+/*
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * i.MX6UL LCDIF controller
+ *
+ * Copyright (c) 2026 Yucai Liu <1486344514@qq.com>
+ */
+
+#ifndef IMX6UL_LCDIF_H
+#define IMX6UL_LCDIF_H
+
+#include "hw/core/sysbus.h"
+#include "qom/object.h"
+#include "qemu/timer.h"
+#include "ui/console.h"
+
+#define TYPE_IMX6UL_LCDIF "imx6ul-lcdif"
+#define IMX6UL_LCDIF_REGS_NUM ((0x230 >> 4) + 1)
+OBJECT_DECLARE_SIMPLE_TYPE(IMX6ULLCDIFState, IMX6UL_LCDIF)
+
+struct IMX6ULLCDIFState {
+    SysBusDevice parent_obj;
+
+    MemoryRegion iomem;
+    MemoryRegionSection fbsection;
+    qemu_irq irq;
+    QemuConsole *con;
+    QEMUTimer *frame_timer;
+    uint32_t fb_base;
+    uint32_t src_width;
+    uint32_t rows;
+    uint8_t src_bpp;
+    bool invalidate;
+    uint32_t regs[IMX6UL_LCDIF_REGS_NUM];
+};
+
+#endif /* IMX6UL_LCDIF_H */
-- 
2.43.0

From: Yucai Liu <1486344514@qq.com>

Instantiate LCDIF as a child object of the i.MX6UL SoC in init and
realize it in the SoC realize path before MMIO/IRQ hookup.

Also make FSL_IMX6UL select CONFIG_IMX6UL_LCDIF and map the LCDIF
region with a 16 KiB size to match the SoC memory map.

Signed-off-by: Yucai Liu <1486344514@qq.com>
Message-id: 20260412110240.93116-3-yangyanglan718@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/Kconfig              |  1 +
 hw/arm/fsl-imx6ul.c         | 12 ++++++++++--
 include/hw/arm/fsl-imx6ul.h |  4 +++-
 3 files changed, 14 insertions(+), 3 deletions(-)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -XXX,XX +XXX,XX @@ config FSL_IMX6UL
     imply I2C_DEVICES
     select A15MPCORE
     select IMX
+    select IMX6UL_LCDIF
     select IMX_FEC
     select IMX_I2C
     select IMX_USBPHY
diff --git a/hw/arm/fsl-imx6ul.c b/hw/arm/fsl-imx6ul.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx6ul.c
+++ b/hw/arm/fsl-imx6ul.c
@@ -XXX,XX +XXX,XX @@
 #include "qemu/osdep.h"
 #include "qapi/error.h"
 #include "hw/arm/fsl-imx6ul.h"
+#include "hw/display/imx6ul_lcdif.h"
 #include "hw/misc/unimp.h"
 #include "hw/usb/imx-usb-phy.h"
 #include "hw/core/boards.h"
@@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj)
         object_initialize_child(obj, name, &s->usb[i], TYPE_CHIPIDEA);
     }
 
+    /*
+     * LCDIF
+     */
+    object_initialize_child(obj, "lcdif", &s->lcdif, TYPE_IMX6UL_LCDIF);
+
     /*
      * SDHCIs
      */
@@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp)
     /*
      * LCD
      */
-    create_unimplemented_device("lcdif", FSL_IMX6UL_LCDIF_ADDR,
-                                FSL_IMX6UL_LCDIF_SIZE);
+    sysbus_realize(SYS_BUS_DEVICE(&s->lcdif), &error_abort);
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->lcdif), 0, FSL_IMX6UL_LCDIF_ADDR);
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->lcdif), 0,
+                       qdev_get_gpio_in(gic, FSL_IMX6UL_LCDIF_IRQ));
 
     /*
      * CSU
diff --git a/include/hw/arm/fsl-imx6ul.h b/include/hw/arm/fsl-imx6ul.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx6ul.h
+++ b/include/hw/arm/fsl-imx6ul.h
@@ -XXX,XX +XXX,XX @@
 #include "hw/net/imx_fec.h"
 #include "hw/usb/chipidea.h"
 #include "hw/usb/imx-usb-phy.h"
+#include "hw/display/imx6ul_lcdif.h"
 #include "system/memory.h"
 #include "target/arm/cpu.h"
 #include "qom/object.h"
@@ -XXX,XX +XXX,XX @@ struct FslIMX6ULState {
     IMX2WdtState       wdt[FSL_IMX6UL_NUM_WDTS];
     IMXUSBPHYState     usbphy[FSL_IMX6UL_NUM_USB_PHYS];
     ChipideaState      usb[FSL_IMX6UL_NUM_USBS];
+    IMX6ULLCDIFState   lcdif;
     MemoryRegion       rom;
     MemoryRegion       caam;
     MemoryRegion       ocram;
@@ -XXX,XX +XXX,XX @@ enum FslIMX6ULMemoryMap {
     FSL_IMX6UL_PXP_SIZE             = (16 * KiB),
 
     FSL_IMX6UL_LCDIF_ADDR           = 0x021C8000,
-    FSL_IMX6UL_LCDIF_SIZE           = 0x100,
+    FSL_IMX6UL_LCDIF_SIZE           = (16 * KiB),
 
     FSL_IMX6UL_CSI_ADDR             = 0x021C4000,
     FSL_IMX6UL_CSI_SIZE             = 0x100,
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

We have a registerfields interface which we can use for defining
fields alongside helpers to access them. Define the basic syndrome
layout and convert the helpers that take the imm16 data directly.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-2-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 75 ++++++++++++++++++++++++++++++++-----------
 1 file changed, 57 insertions(+), 18 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@
 #ifndef TARGET_ARM_SYNDROME_H
 #define TARGET_ARM_SYNDROME_H
 
-#include "qemu/bitops.h"
+#include "hw/core/registerfields.h"
 
 /* Valid Syndrome Register EC field values */
 enum arm_exception_class {
@@ -XXX,XX +XXX,XX @@ enum arm_exception_class {
     EC_AA64_BKPT              = 0x3c,
 };
 
+/* Generic syndrome encoding layout for HSR and lower 32 bits of ESR_EL2 */
+FIELD(SYNDROME, EC, 26, 6)
+FIELD(SYNDROME, IL, 25, 1)
+FIELD(SYNDROME, ISS, 0, 25)
+
 typedef enum {
     SME_ET_AccessTrap,
     SME_ET_Streaming,
@@ -XXX,XX +XXX,XX @@ typedef enum {
 
 static inline uint32_t syn_get_ec(uint32_t syn)
 {
-    return syn >> ARM_EL_EC_SHIFT;
+    return FIELD_EX32(syn, SYNDROME, EC);
 }
 
 static inline uint32_t syn_set_ec(uint32_t syn, uint32_t ec)
 {
-    return deposit32(syn, ARM_EL_EC_SHIFT, ARM_EL_EC_LENGTH, ec);
+    return FIELD_DP32(syn, SYNDROME, EC, ec);
 }
 
 /*
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_set_ec(uint32_t syn, uint32_t ec)
  */
 static inline uint32_t syn_uncategorized(void)
 {
-    return (EC_UNCATEGORIZED << ARM_EL_EC_SHIFT) | ARM_EL_IL;
+    uint32_t res = syn_set_ec(0, EC_UNCATEGORIZED);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    return res;
 }
 
+FIELD(ISS_IMM16, IMM16, 0, 16)
+
 static inline uint32_t syn_aa64_svc(uint32_t imm16)
 {
-    return (EC_AA64_SVC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff);
+    uint32_t res = syn_set_ec(0, EC_AA64_SVC);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16);
+    return res;
 }
 
 static inline uint32_t syn_aa64_hvc(uint32_t imm16)
 {
-    return (EC_AA64_HVC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff);
+    uint32_t res = syn_set_ec(0, EC_AA64_HVC);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16);
+    return res;
 }
 
 static inline uint32_t syn_aa64_smc(uint32_t imm16)
 {
-    return (EC_AA64_SMC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff);
+    uint32_t res = syn_set_ec(0, EC_AA64_SMC);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16);
+    return res;
 }
 
 static inline uint32_t syn_aa32_svc(uint32_t imm16, bool is_16bit)
 {
-    return (EC_AA32_SVC << ARM_EL_EC_SHIFT) | (imm16 & 0xffff)
-        | (is_16bit ? 0 : ARM_EL_IL);
+    uint32_t res = syn_set_ec(0, EC_AA32_SVC);
+    res = FIELD_DP32(res, SYNDROME, IL, is_16bit ? 0 : 1);
+    res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16);
+    return res;
 }
 
 static inline uint32_t syn_aa32_hvc(uint32_t imm16)
 {
-    return (EC_AA32_HVC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff);
+    uint32_t res = syn_set_ec(0, EC_AA32_HVC);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16);
+    return res;
 }
 
 static inline uint32_t syn_aa32_smc(void)
 {
-    return (EC_AA32_SMC << ARM_EL_EC_SHIFT) | ARM_EL_IL;
+    uint32_t res = syn_set_ec(0, EC_AA32_SMC);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    return res;
 }
 
 static inline uint32_t syn_aa64_bkpt(uint32_t imm16)
 {
-    return (EC_AA64_BKPT << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff);
+    uint32_t res = syn_set_ec(0, EC_AA64_BKPT);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16);
+    return res;
 }
 
 static inline uint32_t syn_aa32_bkpt(uint32_t imm16, bool is_16bit)
 {
-    return (EC_AA32_BKPT << ARM_EL_EC_SHIFT) | (imm16 & 0xffff)
-        | (is_16bit ? 0 : ARM_EL_IL);
+    uint32_t res = syn_set_ec(0, EC_AA32_BKPT);
+    res = FIELD_DP32(res, SYNDROME, IL, is_16bit ? 0 : 1);
+    res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16);
+    return res;
 }
 
 static inline uint32_t syn_aa64_sysregtrap(int op0, int op1, int op2,
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_simd_access_trap(int cv, int cond, bool is_16bit)
 
 static inline uint32_t syn_sve_access_trap(void)
 {
-    return (EC_SVEACCESSTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL;
+    uint32_t res = syn_set_ec(0, EC_SVEACCESSTRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    return res;
 }
 
 /*
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit)
 
 static inline uint32_t syn_illegalstate(void)
 {
-    return (EC_ILLEGALSTATE << ARM_EL_EC_SHIFT) | ARM_EL_IL;
+    uint32_t res = syn_set_ec(0, EC_ILLEGALSTATE);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    return res;
 }
 
 static inline uint32_t syn_pcalignment(void)
 {
-    return (EC_PCALIGNMENT << ARM_EL_EC_SHIFT) | ARM_EL_IL;
+    uint32_t res = syn_set_ec(0, EC_PCALIGNMENT);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    return res;
 }
 
 static inline uint32_t syn_gcs_data_check(GCSInstructionType it, int rn)
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_gcs_gcsstr(int ra, int rn)
 
 static inline uint32_t syn_serror(uint32_t extra)
 {
-    return (EC_SERROR << ARM_EL_EC_SHIFT) | ARM_EL_IL | extra;
+    uint32_t res = syn_set_ec(0, EC_SERROR);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    res = FIELD_DP32(res, SYNDROME, ISS, extra);
+    return res;
 }
 
 static inline uint32_t syn_mop(bool is_set, bool is_setg, int options,
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

Migrate syn_aa64_sysregtrap and co-processor register trap syndromes
to the registerfields API. The co-processor syndromes are split
between single and duel register moves.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-3-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 124 ++++++++++++++++++++++++++++++++++--------
 1 file changed, 102 insertions(+), 22 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ enum arm_exception_class {
 
 /* Generic syndrome encoding layout for HSR and lower 32 bits of ESR_EL2 */
 FIELD(SYNDROME, EC, 26, 6)
-FIELD(SYNDROME, IL, 25, 1)
+FIELD(SYNDROME, IL, 25, 1) /* IL=1 for 32 bit instructions */
 FIELD(SYNDROME, ISS, 0, 25)
 
 typedef enum {
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_aa64_smc(uint32_t imm16)
 static inline uint32_t syn_aa32_svc(uint32_t imm16, bool is_16bit)
 {
     uint32_t res = syn_set_ec(0, EC_AA32_SVC);
-    res = FIELD_DP32(res, SYNDROME, IL, is_16bit ? 0 : 1);
+    res = FIELD_DP32(res, SYNDROME, IL, !is_16bit);
     res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16);
     return res;
 }
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_aa64_bkpt(uint32_t imm16)
 static inline uint32_t syn_aa32_bkpt(uint32_t imm16, bool is_16bit)
 {
     uint32_t res = syn_set_ec(0, EC_AA32_BKPT);
-    res = FIELD_DP32(res, SYNDROME, IL, is_16bit ? 0 : 1);
+    res = FIELD_DP32(res, SYNDROME, IL, !is_16bit);
     res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16);
     return res;
 }
 
+/*
+ * ISS encoding for an exception from MSR, MRS, or System instruction
+ * in AArch64 state.
+ */
+FIELD(SYSREG_ISS, ISREAD, 0, 1) /* Direction, 1 is read */
+FIELD(SYSREG_ISS, CRM, 1, 4)
+FIELD(SYSREG_ISS, RT, 5, 5)
+FIELD(SYSREG_ISS, CRN, 10, 4)
+FIELD(SYSREG_ISS, OP1, 14, 3)
+FIELD(SYSREG_ISS, OP2, 17, 3)
+FIELD(SYSREG_ISS, OP0, 20, 2)
+
 static inline uint32_t syn_aa64_sysregtrap(int op0, int op1, int op2,
                                            int crn, int crm, int rt,
                                            int isread)
 {
-    return (EC_SYSTEMREGISTERTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL
-        | (op0 << 20) | (op2 << 17) | (op1 << 14) | (crn << 10) | (rt << 5)
-        | (crm << 1) | isread;
+    uint32_t res = syn_set_ec(0, EC_SYSTEMREGISTERTRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, SYSREG_ISS, OP0, op0);
+    res = FIELD_DP32(res, SYSREG_ISS, OP2, op2);
+    res = FIELD_DP32(res, SYSREG_ISS, OP1, op1);
+    res = FIELD_DP32(res, SYSREG_ISS, CRN, crn);
+    res = FIELD_DP32(res, SYSREG_ISS, RT, rt);
+    res = FIELD_DP32(res, SYSREG_ISS, CRM, crm);
+    res = FIELD_DP32(res, SYSREG_ISS, ISREAD, isread);
+
+    return res;
 }
 
+/*
+ * ISS encoding for an exception from an MCR or MRC access
+ * (move to/from co-processor)
+ */
+FIELD(COPROC_ISS, ISREAD, 0, 1)
+FIELD(COPROC_ISS, CRM, 1, 4)
+FIELD(COPROC_ISS, RT, 5, 5)
+FIELD(COPROC_ISS, CRN, 10, 4)
+FIELD(COPROC_ISS, OP1, 14, 3)
+FIELD(COPROC_ISS, OP2, 17, 3)
+FIELD(COPROC_ISS, COND, 20, 4)
+FIELD(COPROC_ISS, CV, 24, 1)
+
 static inline uint32_t syn_cp14_rt_trap(int cv, int cond, int opc1, int opc2,
                                         int crn, int crm, int rt, int isread,
                                         bool is_16bit)
 {
-    return (EC_CP14RTTRAP << ARM_EL_EC_SHIFT)
-        | (is_16bit ? 0 : ARM_EL_IL)
-        | (cv << 24) | (cond << 20) | (opc2 << 17) | (opc1 << 14)
-        | (crn << 10) | (rt << 5) | (crm << 1) | isread;
+    uint32_t res = syn_set_ec(0, EC_CP14RTTRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, !is_16bit);
+
+    res = FIELD_DP32(res, COPROC_ISS, CV, cv);
+    res = FIELD_DP32(res, COPROC_ISS, COND, cond);
+    res = FIELD_DP32(res, COPROC_ISS, OP2, opc2);
+    res = FIELD_DP32(res, COPROC_ISS, OP1, opc1);
+    res = FIELD_DP32(res, COPROC_ISS, CRN, crn);
+    res = FIELD_DP32(res, COPROC_ISS, RT, rt);
+    res = FIELD_DP32(res, COPROC_ISS, CRM, crm);
+    res = FIELD_DP32(res, COPROC_ISS, ISREAD, isread);
+
+    return res;
 }
 
 static inline uint32_t syn_cp15_rt_trap(int cv, int cond, int opc1, int opc2,
                                         int crn, int crm, int rt, int isread,
                                         bool is_16bit)
 {
-    return (EC_CP15RTTRAP << ARM_EL_EC_SHIFT)
-        | (is_16bit ? 0 : ARM_EL_IL)
-        | (cv << 24) | (cond << 20) | (opc2 << 17) | (opc1 << 14)
-        | (crn << 10) | (rt << 5) | (crm << 1) | isread;
+    uint32_t res = syn_set_ec(0, EC_CP15RTTRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, !is_16bit);
+
+    res = FIELD_DP32(res, COPROC_ISS, CV, cv);
+    res = FIELD_DP32(res, COPROC_ISS, COND, cond);
+    res = FIELD_DP32(res, COPROC_ISS, OP2, opc2);
+    res = FIELD_DP32(res, COPROC_ISS, OP1, opc1);
+    res = FIELD_DP32(res, COPROC_ISS, CRN, crn);
+    res = FIELD_DP32(res, COPROC_ISS, RT, rt);
+    res = FIELD_DP32(res, COPROC_ISS, CRM, crm);
+    res = FIELD_DP32(res, COPROC_ISS, ISREAD, isread);
+
+    return res;
 }
 
+/*
+ * ISS encoding for an exception from an MCRR or MRRC access
+ * (move to/from co-processor with 2 regs)
+ */
+FIELD(COPROC_R2_ISS, ISREAD, 0, 1)
+FIELD(COPROC_R2_ISS, CRM, 1, 4)
+FIELD(COPROC_R2_ISS, RT, 5, 5)
+FIELD(COPROC_R2_ISS, RT2, 10, 5)
+FIELD(COPROC_R2_ISS, OP1, 16, 4)
+FIELD(COPROC_R2_ISS, COND, 20, 4)
+FIELD(COPROC_R2_ISS, CV, 24, 1)
+
 static inline uint32_t syn_cp14_rrt_trap(int cv, int cond, int opc1, int crm,
                                          int rt, int rt2, int isread,
                                          bool is_16bit)
 {
-    return (EC_CP14RRTTRAP << ARM_EL_EC_SHIFT)
-        | (is_16bit ? 0 : ARM_EL_IL)
-        | (cv << 24) | (cond << 20) | (opc1 << 16)
-        | (rt2 << 10) | (rt << 5) | (crm << 1) | isread;
+    uint32_t res = syn_set_ec(0, EC_CP14RRTTRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, !is_16bit);
+
+    res = FIELD_DP32(res, COPROC_R2_ISS, CV, cv);
+    res = FIELD_DP32(res, COPROC_R2_ISS, COND, cond);
+    res = FIELD_DP32(res, COPROC_R2_ISS, OP1, opc1);
+    res = FIELD_DP32(res, COPROC_R2_ISS, RT2, rt2);
+    res = FIELD_DP32(res, COPROC_R2_ISS, RT, rt);
+    res = FIELD_DP32(res, COPROC_R2_ISS, CRM, crm);
+    res = FIELD_DP32(res, COPROC_R2_ISS, ISREAD, isread);
+
+    return res;
 }
 
 static inline uint32_t syn_cp15_rrt_trap(int cv, int cond, int opc1, int crm,
                                          int rt, int rt2, int isread,
                                          bool is_16bit)
 {
-    return (EC_CP15RRTTRAP << ARM_EL_EC_SHIFT)
-        | (is_16bit ? 0 : ARM_EL_IL)
-        | (cv << 24) | (cond << 20) | (opc1 << 16)
-        | (rt2 << 10) | (rt << 5) | (crm << 1) | isread;
+    uint32_t res = syn_set_ec(0, EC_CP15RRTTRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, !is_16bit);
+
+    res = FIELD_DP32(res, COPROC_R2_ISS, CV, cv);
+    res = FIELD_DP32(res, COPROC_R2_ISS, COND, cond);
+    res = FIELD_DP32(res, COPROC_R2_ISS, OP1, opc1);
+    res = FIELD_DP32(res, COPROC_R2_ISS, RT2, rt2);
+    res = FIELD_DP32(res, COPROC_R2_ISS, RT, rt);
+    res = FIELD_DP32(res, COPROC_R2_ISS, CRM, crm);
+    res = FIELD_DP32(res, COPROC_R2_ISS, ISREAD, isread);
+
+    return res;
 }
 
 static inline uint32_t syn_fp_access_trap(int cv, int cond, bool is_16bit,
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

The syn_simd_access trap was never used so remove it. We should only
see the COPROC encoding on v7 architectures.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-4-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 25 +++++++++++++++----------
 1 file changed, 15 insertions(+), 10 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_cp15_rrt_trap(int cv, int cond, int opc1, int crm,
     return res;
 }
 
+/*
+ * ISS encoding for an exception from an access to a register of
+ * instruction resulting from the FPEN or TFP traps.
+ */
+FIELD(FP_ISS, COPROC, 0, 4) /* ARMv7 only */
+FIELD(FP_ISS, COND, 20, 4)
+FIELD(FP_ISS, CV, 24, 1)
+
 static inline uint32_t syn_fp_access_trap(int cv, int cond, bool is_16bit,
                                           int coproc)
 {
     /* AArch32 FP trap or any AArch64 FP/SIMD trap: TA == 0 */
-    return (EC_ADVSIMDFPACCESSTRAP << ARM_EL_EC_SHIFT)
-        | (is_16bit ? 0 : ARM_EL_IL)
-        | (cv << 24) | (cond << 20) | coproc;
-}
+    uint32_t res = syn_set_ec(0, EC_ADVSIMDFPACCESSTRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, !is_16bit);
 
-static inline uint32_t syn_simd_access_trap(int cv, int cond, bool is_16bit)
-{
-    /* AArch32 SIMD trap: TA == 1 coproc == 0 */
-    return (EC_ADVSIMDFPACCESSTRAP << ARM_EL_EC_SHIFT)
-        | (is_16bit ? 0 : ARM_EL_IL)
-        | (cv << 24) | (cond << 20) | (1 << 5);
+    res = FIELD_DP32(res, FP_ISS, CV, cv);
+    res = FIELD_DP32(res, FP_ISS, COND, cond);
+    res = FIELD_DP32(res, FP_ISS, COPROC, coproc);
+
+    return res;
 }
 
 static inline uint32_t syn_sve_access_trap(void)
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

For simplicity keep the OP as a two bit field rather than the two
interlinked fields in the docs (ERET/ERETA).

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-5-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_sve_access_trap(void)
 }
 
 /*
+ * ISS encoding for an exception from an ERET, ERETAA or ERETAB
+ * instructions.
+ *
  * eret_op is bits [1:0] of the ERET instruction, so:
  * 0 for ERET, 2 for ERETAA, 3 for ERETAB.
  */
+FIELD(ERET_ISS, OP, 0, 2)
+
 static inline uint32_t syn_erettrap(int eret_op)
 {
-    return (EC_ERETTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL | eret_op;
+    uint32_t res = syn_set_ec(0, EC_ERETTRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    res = FIELD_DP32(res, ERET_ISS, OP, eret_op);
+
+    return res;
 }
 
 static inline uint32_t syn_smetrap(SMEExceptionType etype, bool is_16bit)
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-6-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_erettrap(int eret_op)
     return res;
 }
 
+/*
+ * ISS encoding for an exception due to SME functionality
+ */
+FIELD(SME_ISS, SMTC, 0, 2)
+
 static inline uint32_t syn_smetrap(SMEExceptionType etype, bool is_16bit)
 {
-    return (EC_SMETRAP << ARM_EL_EC_SHIFT)
-        | (is_16bit ? 0 : ARM_EL_IL) | etype;
+    uint32_t res = syn_set_ec(0, EC_SMETRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, !is_16bit);
+    res = FIELD_DP32(res, SME_ISS, SMTC, etype);
+
+    return res;
 }
 
 static inline uint32_t syn_pacfail(bool data, int keynumber)
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

syn_pactrap is fairly simple as the ISS is all RES0.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-7-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_smetrap(SMEExceptionType etype, bool is_16bit)
     return res;
 }
 
+/*
+ * ISS encoding for a PAC Fail exceptions
+ */
+FIELD(PACFAIL_ISS, BnA, 0, 1) /* B key or A key */
+FIELD(PACFAIL_ISS, DnI, 1, 1) /* Data or Instruction */
+
 static inline uint32_t syn_pacfail(bool data, int keynumber)
 {
-    int error_code = (data << 1) | keynumber;
-    return (EC_PACFAIL << ARM_EL_EC_SHIFT) | ARM_EL_IL | error_code;
+    uint32_t res = syn_set_ec(0, EC_PACFAIL);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, PACFAIL_ISS, DnI, data);
+    res = FIELD_DP32(res, PACFAIL_ISS, BnA, keynumber);
+
+    return res;
 }
 
+/*
+ * ISS encoding for an exception from a trapped Pointer
+ * Authentication instruction is RES0
+ */
 static inline uint32_t syn_pactrap(void)
 {
-    return (EC_PACTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL;
+    uint32_t res = syn_set_ec(0, EC_PACTRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    return res;
 }
 
 static inline uint32_t syn_btitrap(int btype)
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-8-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_pactrap(void)
     return res;
 }
 
+/*
+ * ISS encoding for an exception from a Branch Target Identification
+ * instruction.
+ */
+FIELD(BTI_ISS, BTYPE, 0, 2)
+
 static inline uint32_t syn_btitrap(int btype)
 {
-    return (EC_BTITRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL | btype;
+    uint32_t res = syn_set_ec(0, EC_BTITRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    res = FIELD_DP32(res, BTI_ISS, BTYPE, btype);
+    return res;
 }
 
 static inline uint32_t syn_bxjtrap(int cv, int cond, int rm)
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

This is an Armv7 specific syndrome for chips with Jazelle
functionality.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-9-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 20 ++++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_btitrap(int btype)
     return res;
 }
 
+/*
+ * ISS encoding for trapped BXJ execution
+ *
+ * This is an Armv7 encoding.
+ */
+FIELD(BXJ_ISS, RM, 0, 4)
+/* bits 4:19 are Reserved, UNK/SBZP */
+FIELD(BXJ_ISS, COND, 20, 4)
+FIELD(BXJ_ISS, CV, 24, 1)
+
 static inline uint32_t syn_bxjtrap(int cv, int cond, int rm)
 {
-    return (EC_BXJTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL |
-        (cv << 24) | (cond << 20) | rm;
+    uint32_t res = syn_set_ec(0, EC_BXJTRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, BXJ_ISS, CV, cv);
+    res = FIELD_DP32(res, BXJ_ISS, COND, cond);
+    res = FIELD_DP32(res, BXJ_ISS, RM, rm);
+
+    return res;
 }
 
 static inline uint32_t syn_gpc(int s2ptw, int ind, int gpcsc, int vncr,
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-10-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 30 +++++++++++++++++++++++++++---
 1 file changed, 27 insertions(+), 3 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_bxjtrap(int cv, int cond, int rm)
     return res;
 }
 
+/*
+ * ISS encoding for a Granule Protection Check exception
+ *
+ * These are only reported to EL3
+ */
+FIELD(GPC_ISS, xFSC, 0, 6)
+FIELD(GPC_ISS, WnR, 6, 1) /* Write not Read */
+FIELD(GPC_ISS, S1PTW, 7, 1)
+FIELD(GPC_ISS, CM, 8, 1)
+FIELD(GPC_ISS, VNCR, 13, 1)
+FIELD(GPC_ISS, GPCSC, 14, 6)
+FIELD(GPC_ISS, InD, 20, 1) /* Instruction not Data access */
+FIELD(GPC_ISS, S2PTW, 21, 1)
+
 static inline uint32_t syn_gpc(int s2ptw, int ind, int gpcsc, int vncr,
                                int cm, int s1ptw, int wnr, int fsc)
 {
-    return (EC_GPC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (s2ptw << 21)
-        | (ind << 20) | (gpcsc << 14) | (vncr << 13) | (cm << 8)
-        | (s1ptw << 7) | (wnr << 6) | fsc;
+    uint32_t res = syn_set_ec(0, EC_GPC);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, GPC_ISS, S2PTW, s2ptw);
+    res = FIELD_DP32(res, GPC_ISS, InD, ind);
+    res = FIELD_DP32(res, GPC_ISS, GPCSC, gpcsc);
+    res = FIELD_DP32(res, GPC_ISS, VNCR, vncr);
+    res = FIELD_DP32(res, GPC_ISS, CM, cm);
+    res = FIELD_DP32(res, GPC_ISS, S1PTW, s1ptw);
+    res = FIELD_DP32(res, GPC_ISS, WnR, wnr);
+    res = FIELD_DP32(res, GPC_ISS, xFSC, fsc);
+
+    return res;
 }
 
 static inline uint32_t syn_insn_abort(int same_el, int ea, int s1ptw, int fsc)
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

Migrate syn_insn_abort and syn_data_abort_* to the registerfields API.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20260422125250.1303100-11-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 87 ++++++++++++++++++++++++++++++++++++-------
 1 file changed, 74 insertions(+), 13 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_gpc(int s2ptw, int ind, int gpcsc, int vncr,
     return res;
 }
 
+/*
+ * ISS encoding for an exception from an Instruction Abort
+ *
+ * (aka instruction abort)
+ */
+FIELD(IABORT_ISS, IFSC, 0, 6)
+FIELD(IABORT_ISS, S1PTW, 7, 1)
+FIELD(IABORT_ISS, EA, 9, 1)
+FIELD(IABORT_ISS, FnV, 10, 1) /* FAR not Valid */
+FIELD(IABORT_ISS, SET, 11, 2)
+FIELD(IABORT_ISS, PFV, 14, 1)
+FIELD(IABORT_ISS, TopLevel, 21, 1) /* FEAT_THE */
+
 static inline uint32_t syn_insn_abort(int same_el, int ea, int s1ptw, int fsc)
 {
-    return (EC_INSNABORT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT)
-        | ARM_EL_IL | (ea << 9) | (s1ptw << 7) | fsc;
+    uint32_t res = syn_set_ec(0, EC_INSNABORT + same_el);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, IABORT_ISS, EA, ea);
+    res = FIELD_DP32(res, IABORT_ISS, S1PTW, s1ptw);
+    res = FIELD_DP32(res, IABORT_ISS, IFSC, fsc);
+
+    return res;
 }
 
+/*
+ * ISS encoding for an exception from a Data Abort
+ */
+FIELD(DABORT_ISS, DFSC, 0, 6)
+FIELD(DABORT_ISS, WNR, 6, 1)
+FIELD(DABORT_ISS, S1PTW, 7, 1)
+FIELD(DABORT_ISS, CM, 8, 1)
+FIELD(DABORT_ISS, EA, 9, 1)
+FIELD(DABORT_ISS, FnV, 10, 1)
+FIELD(DABORT_ISS, LST, 11, 2)
+FIELD(DABORT_ISS, VNCR, 13, 1)
+FIELD(DABORT_ISS, AR, 14, 1)
+FIELD(DABORT_ISS, SF, 15, 1)
+FIELD(DABORT_ISS, SRT, 16, 5)
+FIELD(DABORT_ISS, SSE, 21, 1)
+FIELD(DABORT_ISS, SAS, 22, 2)
+FIELD(DABORT_ISS, ISV, 24, 1)
+
 static inline uint32_t syn_data_abort_no_iss(int same_el, int fnv,
                                              int ea, int cm, int s1ptw,
                                              int wnr, int fsc)
 {
-    return (EC_DATAABORT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT)
-           | ARM_EL_IL
-           | (fnv << 10) | (ea << 9) | (cm << 8) | (s1ptw << 7)
-           | (wnr << 6) | fsc;
+    uint32_t res = syn_set_ec(0, EC_DATAABORT + same_el);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, DABORT_ISS, FnV, fnv);
+    res = FIELD_DP32(res, DABORT_ISS, EA, ea);
+    res = FIELD_DP32(res, DABORT_ISS, CM, cm);
+    res = FIELD_DP32(res, DABORT_ISS, S1PTW, s1ptw);
+    res = FIELD_DP32(res, DABORT_ISS, WNR, wnr);
+    res = FIELD_DP32(res, DABORT_ISS, DFSC, fsc);
+
+    return res;
 }
 
 static inline uint32_t syn_data_abort_with_iss(int same_el,
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_data_abort_with_iss(int same_el,
                                                int wnr, int fsc,
                                                bool is_16bit)
 {
-    return (EC_DATAABORT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT)
-           | (is_16bit ? 0 : ARM_EL_IL)
-           | ARM_EL_ISV | (sas << 22) | (sse << 21) | (srt << 16)
-           | (sf << 15) | (ar << 14)
-           | (ea << 9) | (cm << 8) | (s1ptw << 7) | (wnr << 6) | fsc;
+    uint32_t res = syn_set_ec(0, EC_DATAABORT + same_el);
+    res = FIELD_DP32(res, SYNDROME, IL, !is_16bit);
+
+    res = FIELD_DP32(res, DABORT_ISS, ISV, 1);
+    res = FIELD_DP32(res, DABORT_ISS, SAS, sas);
+    res = FIELD_DP32(res, DABORT_ISS, SSE, sse);
+    res = FIELD_DP32(res, DABORT_ISS, SRT, srt);
+    res = FIELD_DP32(res, DABORT_ISS, SF, sf);
+    res = FIELD_DP32(res, DABORT_ISS, AR, ar);
+    res = FIELD_DP32(res, DABORT_ISS, EA, ea);
+    res = FIELD_DP32(res, DABORT_ISS, CM, cm);
+    res = FIELD_DP32(res, DABORT_ISS, S1PTW, s1ptw);
+    res = FIELD_DP32(res, DABORT_ISS, WNR, wnr);
+    res = FIELD_DP32(res, DABORT_ISS, DFSC, fsc);
+
+    return res;
 }
 
 /*
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_data_abort_with_iss(int same_el,
  */
 static inline uint32_t syn_data_abort_vncr(int ea, int wnr, int fsc)
 {
-    return (EC_DATAABORT << ARM_EL_EC_SHIFT) | (1 << ARM_EL_EC_SHIFT)
-        | ARM_EL_IL | ARM_EL_VNCR | (wnr << 6) | fsc;
+    uint32_t res = syn_set_ec(0, EC_DATAABORT_SAME_EL);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, DABORT_ISS, VNCR, 1);
+    res = FIELD_DP32(res, DABORT_ISS, WNR, wnr);
+    res = FIELD_DP32(res, DABORT_ISS, DFSC, fsc);
+
+    return res;
 }
 
 static inline uint32_t syn_swstep(int same_el, int isv, int ex)
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

Migrate syn_swstep, syn_watchpoint and syn_breakpoint to the
registerfields API.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-12-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 54 ++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 48 insertions(+), 6 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_data_abort_vncr(int ea, int wnr, int fsc)
     return res;
 }
 
+/*
+ * ISS encoding for an exception from a Software Step exception.
+ */
+FIELD(SOFTSTEP_ISS, IFSC, 0, 6)
+FIELD(SOFTSTEP_ISS, EX, 6, 1)
+FIELD(SOFTSTEP_ISS, ISV, 24, 1)
+
 static inline uint32_t syn_swstep(int same_el, int isv, int ex)
 {
-    return (EC_SOFTWARESTEP << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT)
-        | ARM_EL_IL | (isv << 24) | (ex << 6) | 0x22;
+    uint32_t res = syn_set_ec(0, EC_SOFTWARESTEP + same_el);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, SOFTSTEP_ISS, ISV, isv);
+    res = FIELD_DP32(res, SOFTSTEP_ISS, EX, ex);
+    res = FIELD_DP32(res, SOFTSTEP_ISS, IFSC, 0x22);
+
+    return res;
 }
 
+/*
+ * ISS encoding for an exception from a Watchpoint exception
+ */
+FIELD(WATCHPOINT_ISS, DFSC, 0, 6)
+FIELD(WATCHPOINT_ISS, WNR, 6, 1)
+FIELD(WATCHPOINT_ISS, CM, 8, 1)
+FIELD(WATCHPOINT_ISS, FnV, 10, 1)
+FIELD(WATCHPOINT_ISS, VNCR, 13, 1) /* FEAT_NV2 */
+FIELD(WATCHPOINT_ISS, FnP, 15, 1)
+FIELD(WATCHPOINT_ISS, WPF, 16, 1)
+/* bellow mandatory from FEAT_Debugv8p9 */
+FIELD(WATCHPOINT_ISS, WPTV, 17, 1) /* FEAT_Debugv8p2 - WPT valid */
+FIELD(WATCHPOINT_ISS, WPT, 18, 6) /* FEAT_Debugv8p2 - missing WP number */
+
 static inline uint32_t syn_watchpoint(int same_el, int cm, int wnr)
 {
-    return (EC_WATCHPOINT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT)
-        | ARM_EL_IL | (cm << 8) | (wnr << 6) | 0x22;
+    uint32_t res = syn_set_ec(0, EC_WATCHPOINT + same_el);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, WATCHPOINT_ISS, CM, cm);
+    res = FIELD_DP32(res, WATCHPOINT_ISS, WNR, wnr);
+    res = FIELD_DP32(res, WATCHPOINT_ISS, DFSC, 0x22);
+
+    return res;
 }
 
+/*
+ * ISS encoding for an exception from a Breakpoint or a Vector Catch
+ * debug exception.
+ */
+FIELD(BREAKPOINT_ISS, IFSC, 0, 6)
+
 static inline uint32_t syn_breakpoint(int same_el)
 {
-    return (EC_BREAKPOINT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT)
-        | ARM_EL_IL | 0x22;
+    uint32_t res = syn_set_ec(0, EC_BREAKPOINT + same_el);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    res = FIELD_DP32(res, BREAKPOINT_ISS, IFSC, 0x22);
+
+    return res;
 }
 
 static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit)
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

This will help later when we expand the fields we report.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-13-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 20 +++++++++++++++++---
 1 file changed, 17 insertions(+), 3 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_breakpoint(int same_el)
     return res;
 }
 
+/*
+ * ISS encoding for an exception from a WF* instruction
+ */
+FIELD(WFX_ISS, TI, 0, 2)
+FIELD(WFX_ISS, RV, 2, 1)
+FIELD(WFX_ISS, RN, 5, 5)
+FIELD(WFX_ISS, COND, 20, 4)
+FIELD(WFX_ISS, CV, 24, 1)
+
 static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit)
 {
-    return (EC_WFX_TRAP << ARM_EL_EC_SHIFT) |
-           (is_16bit ? 0 : (1 << ARM_EL_IL_SHIFT)) |
-           (cv << 24) | (cond << 20) | ti;
+    uint32_t res = syn_set_ec(0, EC_WFX_TRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, !is_16bit);
+
+    res = FIELD_DP32(res, WFX_ISS, CV, cv);
+    res = FIELD_DP32(res, WFX_ISS, COND, cond);
+    res = FIELD_DP32(res, WFX_ISS, TI, ti);
+
+    return res;
 }
 
 static inline uint32_t syn_illegalstate(void)
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

Tweak arg names to make it clear raddr is the data address register
number.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-14-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 39 +++++++++++++++++++++++++++++++++------
 1 file changed, 33 insertions(+), 6 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_pcalignment(void)
     return res;
 }
 
+/*
+ * ISS encoding for a GCS exception
+ *
+ * Field validity depends on EXTYPE
+ */
+FIELD(GCS_ISS, IT, 0, 5)
+FIELD(GCS_ISS, RN, 5, 5) /* only for non EXLOCK exceptions */
+FIELD(GCS_ISS, RADDR, 10, 5) /* only for GCSSTR/GCSSTTR traps */
+FIELD(GCS_ISS, EXTYPE, 20, 4)
+
 static inline uint32_t syn_gcs_data_check(GCSInstructionType it, int rn)
 {
-    return ((EC_GCS << ARM_EL_EC_SHIFT) | ARM_EL_IL |
-            (GCS_ET_DataCheck << 20) | (rn << 5) | it);
+    uint32_t res = syn_set_ec(0, EC_GCS);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, GCS_ISS, EXTYPE, GCS_ET_DataCheck);
+    res = FIELD_DP32(res, GCS_ISS, RN, rn);
+    res = FIELD_DP32(res, GCS_ISS, IT, it);
+
+    return res;
 }
 
 static inline uint32_t syn_gcs_exlock(void)
 {
-    return (EC_GCS << ARM_EL_EC_SHIFT) | ARM_EL_IL | (GCS_ET_EXLOCK << 20);
+    uint32_t res = syn_set_ec(0, EC_GCS);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, GCS_ISS, EXTYPE, GCS_ET_EXLOCK);
+
+    return res;
 }
 
-static inline uint32_t syn_gcs_gcsstr(int ra, int rn)
+static inline uint32_t syn_gcs_gcsstr(int raddr, int rn)
 {
-    return ((EC_GCS << ARM_EL_EC_SHIFT) | ARM_EL_IL |
-            (GCS_ET_GCSSTR_GCSSTTR << 20) | (ra << 10) | (rn << 5));
+    uint32_t res = syn_set_ec(0, EC_GCS);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, GCS_ISS, EXTYPE, GCS_ET_GCSSTR_GCSSTTR);
+    res = FIELD_DP32(res, GCS_ISS, RADDR, raddr);
+    res = FIELD_DP32(res, GCS_ISS, RN, rn);
+
+    return res;
 }
 
 static inline uint32_t syn_serror(uint32_t extra)
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-15-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 33 +++++++++++++++++++++++++++++----
 1 file changed, 29 insertions(+), 4 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_serror(uint32_t extra)
     return res;
 }
 
+/*
+ * ISS encoding for an exception from the Memory Copy and Memory Set
+ * instructions.
+ */
+FIELD(MOP_ISS, SIZEREG, 0, 5)
+FIELD(MOP_ISS, SRCREG, 5, 5)
+FIELD(MOP_ISS, DESTREG, 10, 5)
+FIELD(MOP_ISS, FORMATOPT, 16, 2)
+FIELD(MOP_ISS, OPT_A, 16, 1)
+FIELD(MOP_ISS, WRONG_OPT, 17, 1)
+FIELD(MOP_ISS, EPILOGUE, 18, 1)
+FIELD(MOP_ISS, OPTIONS, 19, 4)
+FIELD(MOP_ISS, IS_SETG, 23, 1)
+FIELD(MOP_ISS, MEMINST, 24, 1)
+
 static inline uint32_t syn_mop(bool is_set, bool is_setg, int options,
                                bool epilogue, bool wrong_option, bool option_a,
                                int destreg, int srcreg, int sizereg)
 {
-    return (EC_MOP << ARM_EL_EC_SHIFT) | ARM_EL_IL |
-        (is_set << 24) | (is_setg << 23) | (options << 19) |
-        (epilogue << 18) | (wrong_option << 17) | (option_a << 16) |
-        (destreg << 10) | (srcreg << 5) | sizereg;
+    uint32_t res = syn_set_ec(0, EC_MOP);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, MOP_ISS, MEMINST, is_set);
+    res = FIELD_DP32(res, MOP_ISS, IS_SETG, is_setg);
+    res = FIELD_DP32(res, MOP_ISS, OPTIONS, options);
+    res = FIELD_DP32(res, MOP_ISS, EPILOGUE, epilogue);
+    res = FIELD_DP32(res, MOP_ISS, WRONG_OPT, wrong_option);
+    res = FIELD_DP32(res, MOP_ISS, OPT_A, option_a);
+    res = FIELD_DP32(res, MOP_ISS, DESTREG, destreg);
+    res = FIELD_DP32(res, MOP_ISS, SRCREG, srcreg);
+    res = FIELD_DP32(res, MOP_ISS, SIZEREG, sizereg);
+
+    return res;
 }
 
 
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

It shares the same COPROC_ISS encoding as the other CP traps although
not all the fields are used.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-16-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h       | 16 ++++++++++++++++
 target/arm/tcg/vfp_helper.c |  5 +----
 2 files changed, 17 insertions(+), 4 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ FIELD(COPROC_ISS, OP2, 17, 3)
 FIELD(COPROC_ISS, COND, 20, 4)
 FIELD(COPROC_ISS, CV, 24, 1)
 
+static inline uint32_t syn_cp10_rt_trap(int cv, int cond, int opc1,
+                                        int crn, int rt, int isread)
+{
+    uint32_t res = syn_set_ec(0, EC_FPIDTRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, COPROC_ISS, CV, cv);
+    res = FIELD_DP32(res, COPROC_ISS, COND, cond);
+    res = FIELD_DP32(res, COPROC_ISS, OP1, opc1);
+    res = FIELD_DP32(res, COPROC_ISS, CRN, crn);
+    res = FIELD_DP32(res, COPROC_ISS, RT, rt);
+    res = FIELD_DP32(res, COPROC_ISS, ISREAD, isread);
+
+    return res;
+}
+
 static inline uint32_t syn_cp14_rt_trap(int cv, int cond, int opc1, int opc2,
                                         int crn, int crm, int rt, int isread,
                                         bool is_16bit)
diff --git a/target/arm/tcg/vfp_helper.c b/target/arm/tcg/vfp_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/vfp_helper.c
+++ b/target/arm/tcg/vfp_helper.c
@@ -XXX,XX +XXX,XX @@ void HELPER(check_hcr_el2_trap)(CPUARMState *env, uint32_t rt, uint32_t reg)
         g_assert_not_reached();
     }
 
-    syndrome = ((EC_FPIDTRAP << ARM_EL_EC_SHIFT)
-                | ARM_EL_IL
-                | (1 << 24) | (0xe << 20) | (7 << 14)
-                | (reg << 10) | (rt << 5) | 1);
+    syndrome = syn_cp10_rt_trap(1, 0xe, 7, reg, rt, 1);
 
     raise_exception(env, EXCP_HYP_TRAP, syndrome, 2);
 }
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

One more step towards dropping the old #defines.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-17-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/helper.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/target/arm/helper.c b/target/arm/helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch32_hyp(CPUState *cs)
              */
             if (cs->exception_index == EXCP_PREFETCH_ABORT ||
                 (cs->exception_index == EXCP_DATA_ABORT &&
-                 !(env->exception.syndrome & ARM_EL_ISV)) ||
+                 !FIELD_EX32(env->exception.syndrome, SYNDROME, IL)) ||
                 syn_get_ec(env->exception.syndrome) == EC_UNCATEGORIZED) {
-                env->exception.syndrome &= ~ARM_EL_IL;
+                env->exception.syndrome = FIELD_DP32(env->exception.syndrome, SYNDROME, IL, 0);
             }
         }
         env->cp15.esr_el[2] = env->exception.syndrome;
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

This removes the last use of ARM_EL_EC_SHIFT.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-18-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h  | 1 -
 target/arm/tcg/debug.c | 2 +-
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ typedef enum {
 } GCSInstructionType;
 
 #define ARM_EL_EC_LENGTH 6
-#define ARM_EL_EC_SHIFT 26
 #define ARM_EL_IL_SHIFT 25
 #define ARM_EL_ISV_SHIFT 24
 #define ARM_EL_IL (1 << ARM_EL_IL_SHIFT)
diff --git a/target/arm/tcg/debug.c b/target/arm/tcg/debug.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/debug.c
+++ b/target/arm/tcg/debug.c
@@ -XXX,XX +XXX,XX @@ raise_exception_debug(CPUARMState *env, uint32_t excp, uint32_t syndrome)
      * Similarly for watchpoint and breakpoint matches.
      */
     assert(debug_el >= cur_el);
-    syndrome |= (debug_el == cur_el) << ARM_EL_EC_SHIFT;
+    syndrome |= (debug_el == cur_el) << R_SYNDROME_EC_SHIFT;
     raise_exception(env, excp, syndrome, debug_el);
 }
 
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

Rather than open coding a bunch of shifts and masks we can use the
syndrome definitions. While we are at it assert it really is a
EC_DATAABORT.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-19-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/whpx/whpx-all.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/target/arm/whpx/whpx-all.c b/target/arm/whpx/whpx-all.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/whpx/whpx-all.c
+++ b/target/arm/whpx/whpx-all.c
@@ -XXX,XX +XXX,XX @@ static int whpx_handle_mmio(CPUState *cpu, WHV_MEMORY_ACCESS_CONTEXT *ctx)
 {
     uint64_t syndrome = ctx->Syndrome;
 
-    bool isv = syndrome & ARM_EL_ISV;
-    bool iswrite = (syndrome >> 6) & 1;
-    bool sse = (syndrome >> 21) & 1;
-    uint32_t sas = (syndrome >> 22) & 3;
+    bool isv = FIELD_EX32(syndrome, DABORT_ISS, ISV);
+    bool iswrite = FIELD_EX32(syndrome, DABORT_ISS, WNR);
+    bool sse = FIELD_EX32(syndrome, DABORT_ISS, SSE);
+    uint32_t sas = FIELD_EX32(syndrome, DABORT_ISS, SAS);
     uint32_t len = 1 << sas;
-    uint32_t srt = (syndrome >> 16) & 0x1f;
-    uint32_t cm = (syndrome >> 8) & 0x1;
+    uint32_t srt = FIELD_EX32(syndrome, DABORT_ISS, SRT);
+    uint32_t cm = FIELD_EX32(syndrome, DABORT_ISS, CM);
     uint64_t val = 0;
 
+    assert(syn_get_ec(syndrome) == EC_DATAABORT);
     assert(!cm);
     assert(isv);
 
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

Rather than open coding a bunch of shifts and masks we can use the
syndrome definitions.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20260422125250.1303100-20-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/hvf/hvf.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/target/arm/hvf/hvf.c b/target/arm/hvf/hvf.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/hvf/hvf.c
+++ b/target/arm/hvf/hvf.c
@@ -XXX,XX +XXX,XX @@ static int hvf_handle_exception(CPUState *cpu, hv_vcpu_exit_exception_t *excp)
         break;
     }
     case EC_DATAABORT: {
-        bool isv = syndrome & ARM_EL_ISV;
-        bool iswrite = (syndrome >> 6) & 1;
-        bool s1ptw = (syndrome >> 7) & 1;
-        bool sse = (syndrome >> 21) & 1;
-        uint32_t sas = (syndrome >> 22) & 3;
+        bool isv = FIELD_EX32(syndrome, DABORT_ISS, ISV);
+        bool iswrite = FIELD_EX32(syndrome, DABORT_ISS, WNR);
+        bool s1ptw = FIELD_EX32(syndrome, DABORT_ISS, S1PTW);
+        bool sse = FIELD_EX32(syndrome, DABORT_ISS, SSE);
+        uint32_t sas = FIELD_EX32(syndrome, DABORT_ISS, SAS);
         uint32_t len = 1 << sas;
-        uint32_t srt = (syndrome >> 16) & 0x1f;
-        uint32_t cm = (syndrome >> 8) & 0x1;
+        uint32_t srt = FIELD_EX32(syndrome, DABORT_ISS, SRT);
+        uint32_t cm = FIELD_EX32(syndrome, DABORT_ISS, CM);
         uint64_t val = 0;
         uint64_t ipa = excp->physical_address;
         AddressSpace *as = cpu_get_address_space(cpu, ARMASIdx_NS);
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

One more step to removing the old defines.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-21-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/tlb_helper.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

From: Alex Bennée <alex.bennee@linaro.org>

These are only valid for data abort syndromes.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-22-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/tlb_helper.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/target/arm/tcg/tlb_helper.c b/target/arm/tcg/tlb_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/tlb_helper.c
+++ b/target/arm/tcg/tlb_helper.c
@@ -XXX,XX +XXX,XX @@ static inline uint64_t merge_syn_data_abort(uint32_t template_syn,
      * ST64BV, or ST64BV0 insns report syndrome info even for stage-1
      * faults and regardless of the target EL.
      */
-    if (template_syn & ARM_EL_VNCR) {
+    if (FIELD_EX32(template_syn, DABORT_ISS, VNCR)) {
         /*
          * FEAT_NV2 faults on accesses via VNCR_EL2 are a special case:
          * they are always reported as "same EL", even though we are going
@@ -XXX,XX +XXX,XX @@ void arm_deliver_fault(ARMCPU *cpu, vaddr addr,
      * because we masked that out in disas_set_insn_syndrome())
      */
     bool is_vncr = (access_type != MMU_INST_FETCH) &&
-        (env->exception.syndrome & ARM_EL_VNCR);
+        FIELD_EX32(env->exception.syndrome, DABORT_ISS, VNCR);
 
     if (is_vncr) {
         /* FEAT_NV2 faults on accesses via VNCR_EL2 go to EL2 */
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

Now everything is defined with registerfields we can drop the old
defines.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-23-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 9 ---------
 1 file changed, 9 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ typedef enum {
     GCS_IT_GCSPOPX = 9,
 } GCSInstructionType;
 
-#define ARM_EL_EC_LENGTH 6
-#define ARM_EL_IL_SHIFT 25
-#define ARM_EL_ISV_SHIFT 24
-#define ARM_EL_IL (1 << ARM_EL_IL_SHIFT)
-#define ARM_EL_ISV (1 << ARM_EL_ISV_SHIFT)
-
-/* In the Data Abort syndrome */
-#define ARM_EL_VNCR (1 << 13)
-
 static inline uint32_t syn_get_ec(uint32_t syn)
 {
     return FIELD_EX32(syn, SYNDROME, EC);
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

Pass the register number (rd) to the wfit helper and report it in the
syndrome ISS.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-24-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h          | 11 ++++++++++-
 target/arm/tcg/helper-defs.h   |  2 +-
 target/arm/tcg/op_helper.c     |  7 ++++---
 target/arm/tcg/translate-a64.c |  2 +-
 4 files changed, 16 insertions(+), 6 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ FIELD(WFX_ISS, RN, 5, 5)
 FIELD(WFX_ISS, COND, 20, 4)
 FIELD(WFX_ISS, CV, 24, 1)
 
-static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit)
+typedef enum {
+    WFI = 0b00,
+    WFE = 0b01,
+    WFIT = 0b10,
+    WFET = 0xb11
+} wfx_ti;
+
+static inline uint32_t syn_wfx(int cv, int cond, int rn, bool rv, wfx_ti ti, bool is_16bit)
 {
     uint32_t res = syn_set_ec(0, EC_WFX_TRAP);
     res = FIELD_DP32(res, SYNDROME, IL, !is_16bit);
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit)
     res = FIELD_DP32(res, WFX_ISS, CV, cv);
     res = FIELD_DP32(res, WFX_ISS, COND, cond);
     res = FIELD_DP32(res, WFX_ISS, TI, ti);
+    res = FIELD_DP32(res, WFX_ISS, RN, rn);
+    res = FIELD_DP32(res, WFX_ISS, RV, rv);
 
     return res;
 }
diff --git a/target/arm/tcg/helper-defs.h b/target/arm/tcg/helper-defs.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/helper-defs.h
+++ b/target/arm/tcg/helper-defs.h
@@ -XXX,XX +XXX,XX @@ DEF_HELPER_2(exception_pc_alignment, noreturn, env, vaddr)
 DEF_HELPER_1(setend, void, env)
 DEF_HELPER_2(wfi, void, env, i32)
 DEF_HELPER_1(wfe, void, env)
-DEF_HELPER_2(wfit, void, env, i64)
+DEF_HELPER_2(wfit, void, env, i32)
 DEF_HELPER_1(yield, void, env)
 DEF_HELPER_1(pre_hvc, void, env)
 DEF_HELPER_2(pre_smc, void, env, i32)
diff --git a/target/arm/tcg/op_helper.c b/target/arm/tcg/op_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/op_helper.c
+++ b/target/arm/tcg/op_helper.c
@@ -XXX,XX +XXX,XX @@ void HELPER(wfi)(CPUARMState *env, uint32_t insn_len)
             env->regs[15] -= insn_len;
         }
 
-        raise_exception(env, excp, syn_wfx(1, 0xe, 0, insn_len == 2),
+        raise_exception(env, excp, syn_wfx(1, 0xe, 0, false, WFI, insn_len == 2),
                         target_el);
     }
 
@@ -XXX,XX +XXX,XX @@ void HELPER(wfi)(CPUARMState *env, uint32_t insn_len)
 #endif
 }
 
-void HELPER(wfit)(CPUARMState *env, uint64_t timeout)
+void HELPER(wfit)(CPUARMState *env, uint32_t rd)
 {
 #ifdef CONFIG_USER_ONLY
     /*
@@ -XXX,XX +XXX,XX @@ void HELPER(wfit)(CPUARMState *env, uint64_t timeout)
     int target_el = check_wfx_trap(env, false, &excp);
     /* The WFIT should time out when CNTVCT_EL0 >= the specified value. */
     uint64_t cntval = gt_get_countervalue(env);
+    uint64_t timeout = env->xregs[rd];
     /*
      * We want the value that we would get if we read CNTVCT_EL0 from
      * the current exception level, so the direct_access offset, not
@@ -XXX,XX +XXX,XX @@ void HELPER(wfit)(CPUARMState *env, uint64_t timeout)
 
     if (target_el) {
         env->pc -= 4;
-        raise_exception(env, excp, syn_wfx(1, 0xe, 2, false), target_el);
+        raise_exception(env, excp, syn_wfx(1, 0xe, rd, true, WFIT, false), target_el);
     }
 
     if (uadd64_overflow(timeout, offset, &nexttick)) {
diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-a64.c
+++ b/target/arm/tcg/translate-a64.c
@@ -XXX,XX +XXX,XX @@ static bool trans_WFIT(DisasContext *s, arg_WFIT *a)
     }
 
     gen_a64_update_pc(s, 4);
-    gen_helper_wfit(tcg_env, cpu_reg(s, a->rd));
+    gen_helper_wfit(tcg_env, tcg_constant_i32(a->rd));
     /* Go back to the main loop to check for interrupts */
     s->base.is_jmp = DISAS_EXIT;
     return true;
-- 
2.43.0