The following changes since commit 9435a8b3dd35f1f926f1b9127e8a906217a5518a: Merge remote-tracking branch 'remotes/kraxel/tags/sirius/ipxe-20200908-pull-request' into staging (2020-09-08 21:21:13 +0100) are available in the Git repository at: git@github.com:alistair23/qemu.git tags/pull-riscv-to-apply-20200910 for you to fetch changes up to 7595a65818ea9b49c36650a8c217a1ef9bd6e62a: hw/riscv: Sort the Kconfig options in alphabetical order (2020-09-09 15:54:19 -0700) ---------------------------------------------------------------- This PR includes multiple fixes and features for RISC-V: - Fixes a bug in printing trap causes - Allows 16-bit writes to the SiFive test device. This fixes the failure to reboot the RISC-V virt machine - Support for the Microchip PolarFire SoC and Icicle Kit - A reafactor of RISC-V code out of hw/riscv ---------------------------------------------------------------- Bin Meng (28): target/riscv: cpu: Add a new 'resetvec' property hw/riscv: hart: Add a new 'resetvec' property target/riscv: cpu: Set reset vector based on the configured property value hw/riscv: Initial support for Microchip PolarFire SoC Icicle Kit board hw/char: Add Microchip PolarFire SoC MMUART emulation hw/riscv: microchip_pfsoc: Connect 5 MMUARTs hw/sd: Add Cadence SDHCI emulation hw/riscv: microchip_pfsoc: Connect a Cadence SDHCI controller and an SD card hw/dma: Add SiFive platform DMA controller emulation hw/riscv: microchip_pfsoc: Connect a DMA controller hw/net: cadence_gem: Add a new 'phy-addr' property hw/arm: xlnx: Set all boards' GEM 'phy-addr' property value to 23 hw/riscv: microchip_pfsoc: Connect 2 Cadence GEMs hw/riscv: microchip_pfsoc: Hook GPIO controllers hw/riscv: clint: Avoid using hard-coded timebase frequency hw/riscv: sifive_u: Connect a DMA controller hw/riscv: Move sifive_e_prci model to hw/misc hw/riscv: Move sifive_u_prci model to hw/misc hw/riscv: Move sifive_u_otp model to hw/misc hw/riscv: Move sifive_gpio model to hw/gpio hw/riscv: Move sifive_clint model to hw/intc hw/riscv: Move sifive_plic model to hw/intc hw/riscv: Move riscv_htif model to hw/char hw/riscv: Move sifive_uart model to hw/char hw/riscv: Move sifive_test model to hw/misc hw/riscv: Always build riscv_hart.c hw/riscv: Drop CONFIG_SIFIVE hw/riscv: Sort the Kconfig options in alphabetical order Nathan Chancellor (1): riscv: sifive_test: Allow 16-bit writes to memory region Yifei Jiang (1): target/riscv: Fix bug in getting trap cause name for trace_riscv_trap default-configs/riscv64-softmmu.mak | 1 + {include/hw/riscv => hw/intc}/sifive_plic.h | 0 hw/riscv/trace.h | 1 - include/hw/char/mchp_pfsoc_mmuart.h | 61 ++++ include/hw/{riscv => char}/riscv_htif.h | 0 include/hw/{riscv => char}/sifive_uart.h | 0 include/hw/dma/sifive_pdma.h | 57 ++++ include/hw/{riscv => gpio}/sifive_gpio.h | 0 include/hw/{riscv => intc}/sifive_clint.h | 4 +- include/hw/{riscv => misc}/sifive_e_prci.h | 0 include/hw/{riscv => misc}/sifive_test.h | 0 include/hw/{riscv => misc}/sifive_u_otp.h | 0 include/hw/{riscv => misc}/sifive_u_prci.h | 0 include/hw/net/cadence_gem.h | 2 + include/hw/riscv/microchip_pfsoc.h | 133 +++++++++ include/hw/riscv/riscv_hart.h | 1 + include/hw/riscv/sifive_e.h | 2 +- include/hw/riscv/sifive_u.h | 17 +- include/hw/sd/cadence_sdhci.h | 47 +++ target/riscv/cpu.h | 8 +- hw/arm/xilinx_zynq.c | 1 + hw/arm/xlnx-versal.c | 1 + hw/arm/xlnx-zynqmp.c | 2 + hw/char/mchp_pfsoc_mmuart.c | 86 ++++++ hw/{riscv => char}/riscv_htif.c | 2 +- hw/{riscv => char}/sifive_uart.c | 2 +- hw/dma/sifive_pdma.c | 313 ++++++++++++++++++++ hw/{riscv => gpio}/sifive_gpio.c | 2 +- hw/{riscv => intc}/sifive_clint.c | 28 +- hw/{riscv => intc}/sifive_plic.c | 2 +- hw/{riscv => misc}/sifive_e_prci.c | 2 +- hw/{riscv => misc}/sifive_test.c | 4 +- hw/{riscv => misc}/sifive_u_otp.c | 2 +- hw/{riscv => misc}/sifive_u_prci.c | 2 +- hw/net/cadence_gem.c | 7 +- hw/riscv/microchip_pfsoc.c | 437 ++++++++++++++++++++++++++++ hw/riscv/opentitan.c | 1 + hw/riscv/riscv_hart.c | 3 + hw/riscv/sifive_e.c | 12 +- hw/riscv/sifive_u.c | 41 ++- hw/riscv/spike.c | 7 +- hw/riscv/virt.c | 9 +- hw/sd/cadence_sdhci.c | 193 ++++++++++++ target/riscv/cpu.c | 19 +- target/riscv/cpu_helper.c | 8 +- target/riscv/csr.c | 4 +- MAINTAINERS | 9 + hw/char/Kconfig | 9 + hw/char/meson.build | 3 + hw/dma/Kconfig | 3 + hw/dma/meson.build | 1 + hw/gpio/Kconfig | 3 + hw/gpio/meson.build | 1 + hw/gpio/trace-events | 6 + hw/intc/Kconfig | 6 + hw/intc/meson.build | 2 + hw/misc/Kconfig | 12 + hw/misc/meson.build | 6 + hw/riscv/Kconfig | 70 +++-- hw/riscv/meson.build | 12 +- hw/riscv/trace-events | 7 - hw/sd/Kconfig | 4 + hw/sd/meson.build | 1 + meson.build | 1 - 64 files changed, 1575 insertions(+), 105 deletions(-) rename {include/hw/riscv => hw/intc}/sifive_plic.h (100%) delete mode 100644 hw/riscv/trace.h create mode 100644 include/hw/char/mchp_pfsoc_mmuart.h rename include/hw/{riscv => char}/riscv_htif.h (100%) rename include/hw/{riscv => char}/sifive_uart.h (100%) create mode 100644 include/hw/dma/sifive_pdma.h rename include/hw/{riscv => gpio}/sifive_gpio.h (100%) rename include/hw/{riscv => intc}/sifive_clint.h (92%) rename include/hw/{riscv => misc}/sifive_e_prci.h (100%) rename include/hw/{riscv => misc}/sifive_test.h (100%) rename include/hw/{riscv => misc}/sifive_u_otp.h (100%) rename include/hw/{riscv => misc}/sifive_u_prci.h (100%) create mode 100644 include/hw/riscv/microchip_pfsoc.h create mode 100644 include/hw/sd/cadence_sdhci.h create mode 100644 hw/char/mchp_pfsoc_mmuart.c rename hw/{riscv => char}/riscv_htif.c (99%) rename hw/{riscv => char}/sifive_uart.c (99%) create mode 100644 hw/dma/sifive_pdma.c rename hw/{riscv => gpio}/sifive_gpio.c (99%) rename hw/{riscv => intc}/sifive_clint.c (90%) rename hw/{riscv => intc}/sifive_plic.c (99%) rename hw/{riscv => misc}/sifive_e_prci.c (99%) rename hw/{riscv => misc}/sifive_test.c (97%) rename hw/{riscv => misc}/sifive_u_otp.c (99%) rename hw/{riscv => misc}/sifive_u_prci.c (99%) create mode 100644 hw/riscv/microchip_pfsoc.c create mode 100644 hw/sd/cadence_sdhci.c delete mode 100644 hw/riscv/trace-events From: Yifei Jiang <jiangyifei@huawei.com> When the cause number is equal to or greater than 23, print "(unknown)" in trace_riscv_trap. The max valid number of riscv_excp_names is 23, so the last excpetion "guest_store_page_fault" can not be printed. In addition, the current check of cause is invalid for riscv_intr_names. So introduce riscv_cpu_get_trap_name to get the trap cause name. Signed-off-by: Yifei Jiang <jiangyifei@huawei.com> Signed-off-by: Yipeng Yin <yinyipeng1@huawei.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20200814035819.1214-1-jiangyifei@huawei.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 1 + target/riscv/cpu.c | 11 +++++++++++ target/riscv/cpu_helper.c | 4 ++-- 3 files changed, 14 insertions(+), 2 deletions(-) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ extern const char * const riscv_fpr_regnames[]; extern const char * const riscv_excp_names[]; extern const char * const riscv_intr_names[]; +const char *riscv_cpu_get_trap_name(target_ulong cause, bool async); void riscv_cpu_do_interrupt(CPUState *cpu); int riscv_cpu_gdb_read_register(CPUState *cpu, GByteArray *buf, int reg); int riscv_cpu_gdb_write_register(CPUState *cpu, uint8_t *buf, int reg); diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const char * const riscv_intr_names[] = { "reserved" }; +const char *riscv_cpu_get_trap_name(target_ulong cause, bool async) +{ + if (async) { + return (cause < ARRAY_SIZE(riscv_intr_names)) ? + riscv_intr_names[cause] : "(unknown)"; + } else { + return (cause < ARRAY_SIZE(riscv_excp_names)) ? + riscv_excp_names[cause] : "(unknown)"; + } +} + static void set_misa(CPURISCVState *env, target_ulong misa) { env->misa_mask = env->misa = misa; diff --git a/target/riscv/cpu_helper.c b/target/riscv/cpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_helper.c +++ b/target/riscv/cpu_helper.c @@ -XXX,XX +XXX,XX @@ void riscv_cpu_do_interrupt(CPUState *cs) } } - trace_riscv_trap(env->mhartid, async, cause, env->pc, tval, cause < 23 ? - (async ? riscv_intr_names : riscv_excp_names)[cause] : "(unknown)"); + trace_riscv_trap(env->mhartid, async, cause, env->pc, tval, + riscv_cpu_get_trap_name(cause, async)); if (env->priv <= PRV_S && cause < TARGET_LONG_BITS && ((deleg >> cause) & 1)) { -- 2.28.0 From: Nathan Chancellor <natechancellor@gmail.com> When shutting down the machine running a mainline Linux kernel, the following error happens: $ build/riscv64-softmmu/qemu-system-riscv64 -bios default -M virt \ -display none -initrd rootfs.cpio -kernel Image -m 512m \ -nodefaults -serial mon:stdio ... Requesting system poweroff [ 4.999630] reboot: Power down sbi_trap_error: hart0: trap handler failed (error -2) sbi_trap_error: hart0: mcause=0x0000000000000007 mtval=0x0000000000100000 sbi_trap_error: hart0: mepc=0x000000008000d4cc mstatus=0x0000000000001822 sbi_trap_error: hart0: ra=0x000000008000999e sp=0x0000000080015c78 sbi_trap_error: hart0: gp=0xffffffe000e76610 tp=0xffffffe0081b89c0 sbi_trap_error: hart0: s0=0x0000000080015c88 s1=0x0000000000000040 sbi_trap_error: hart0: a0=0x0000000000000000 a1=0x0000000080004024 sbi_trap_error: hart0: a2=0x0000000080004024 a3=0x0000000080004024 sbi_trap_error: hart0: a4=0x0000000000100000 a5=0x0000000000005555 sbi_trap_error: hart0: a6=0x0000000000004024 a7=0x0000000080011158 sbi_trap_error: hart0: s2=0x0000000000000000 s3=0x0000000080016000 sbi_trap_error: hart0: s4=0x0000000000000000 s5=0x0000000000000000 sbi_trap_error: hart0: s6=0x0000000000000001 s7=0x0000000000000000 sbi_trap_error: hart0: s8=0x0000000000000000 s9=0x0000000000000000 sbi_trap_error: hart0: s10=0x0000000000000000 s11=0x0000000000000008 sbi_trap_error: hart0: t0=0x0000000000000000 t1=0x0000000000000000 sbi_trap_error: hart0: t2=0x0000000000000000 t3=0x0000000000000000 sbi_trap_error: hart0: t4=0x0000000000000000 t5=0x0000000000000000 sbi_trap_error: hart0: t6=0x0000000000000000 The kernel does a 16-bit write when powering off the machine, which was allowed before commit 5d971f9e67 ("memory: Revert "memory: accept mismatching sizes in memory_region_access_valid""). Make min_access_size match reality so that the machine can shut down properly now. Cc: qemu-stable@nongnu.org Fixes: 88a07990fa ("SiFive RISC-V Test Finisher") Fixes: 5d971f9e67 ("memory: Revert "memory: accept mismatching sizes in memory_region_access_valid"") Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20200901055822.2721209-1-natechancellor@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/sifive_test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/riscv/sifive_test.c b/hw/riscv/sifive_test.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/sifive_test.c +++ b/hw/riscv/sifive_test.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps sifive_test_ops = { .write = sifive_test_write, .endianness = DEVICE_NATIVE_ENDIAN, .valid = { - .min_access_size = 4, + .min_access_size = 2, .max_access_size = 4 } }; -- 2.28.0 From: Bin Meng <bin.meng@windriver.com> Currently the reset vector address is hard-coded in a RISC-V CPU's instance_init() routine. In a real world we can have 2 exact same CPUs except for the reset vector address, which is pretty common in the RISC-V core IP licensing business. Normally reset vector address is a configurable parameter. Let's create a 64-bit property to store the reset vector address which covers both 32-bit and 64-bit CPUs. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1598924352-89526-2-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 1 + target/riscv/cpu.c | 1 + 2 files changed, 2 insertions(+) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct RISCVCPU { uint16_t elen; bool mmu; bool pmp; + uint64_t resetvec; } cfg; } RISCVCPU; diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static Property riscv_cpu_properties[] = { DEFINE_PROP_UINT16("elen", RISCVCPU, cfg.elen, 64), DEFINE_PROP_BOOL("mmu", RISCVCPU, cfg.mmu, true), DEFINE_PROP_BOOL("pmp", RISCVCPU, cfg.pmp, true), + DEFINE_PROP_UINT64("resetvec", RISCVCPU, cfg.resetvec, DEFAULT_RSTVEC), DEFINE_PROP_END_OF_LIST(), }; -- 2.28.0 From: Bin Meng <bin.meng@windriver.com> RISC-V machines do not instantiate RISC-V CPUs directly, instead they do that via the hart array. Add a new property for the reset vector address to allow the value to be passed to the CPU, before CPU is realized. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1598924352-89526-3-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/riscv/riscv_hart.h | 1 + hw/riscv/riscv_hart.c | 3 +++ 2 files changed, 4 insertions(+) diff --git a/include/hw/riscv/riscv_hart.h b/include/hw/riscv/riscv_hart.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/riscv/riscv_hart.h +++ b/include/hw/riscv/riscv_hart.h @@ -XXX,XX +XXX,XX @@ typedef struct RISCVHartArrayState { uint32_t num_harts; uint32_t hartid_base; char *cpu_type; + uint64_t resetvec; RISCVCPU *harts; } RISCVHartArrayState; diff --git a/hw/riscv/riscv_hart.c b/hw/riscv/riscv_hart.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv_hart.c +++ b/hw/riscv/riscv_hart.c @@ -XXX,XX +XXX,XX @@ static Property riscv_harts_props[] = { DEFINE_PROP_UINT32("num-harts", RISCVHartArrayState, num_harts, 1), DEFINE_PROP_UINT32("hartid-base", RISCVHartArrayState, hartid_base, 0), DEFINE_PROP_STRING("cpu-type", RISCVHartArrayState, cpu_type), + DEFINE_PROP_UINT64("resetvec", RISCVHartArrayState, resetvec, + DEFAULT_RSTVEC), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ static bool riscv_hart_realize(RISCVHartArrayState *s, int idx, char *cpu_type, Error **errp) { object_initialize_child(OBJECT(s), "harts[*]", &s->harts[idx], cpu_type); + qdev_prop_set_uint64(DEVICE(&s->harts[idx]), "resetvec", s->resetvec); s->harts[idx].env.mhartid = s->hartid_base + idx; qemu_register_reset(riscv_harts_cpu_reset, &s->harts[idx]); return qdev_realize(DEVICE(&s->harts[idx]), NULL, errp); -- 2.28.0 From: Bin Meng <bin.meng@windriver.com> Now that we have the newly introduced 'resetvec' property in the RISC-V CPU and HART, instead of hard-coding the reset vector addr in the CPU's instance_init(), move that to riscv_cpu_realize() based on the configured property value from the RISC-V machines. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1598924352-89526-4-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/opentitan.c | 1 + hw/riscv/sifive_e.c | 1 + hw/riscv/sifive_u.c | 2 ++ target/riscv/cpu.c | 7 ++----- 4 files changed, 6 insertions(+), 5 deletions(-) diff --git a/hw/riscv/opentitan.c b/hw/riscv/opentitan.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/opentitan.c +++ b/hw/riscv/opentitan.c @@ -XXX,XX +XXX,XX @@ static void lowrisc_ibex_soc_realize(DeviceState *dev_soc, Error **errp) &error_abort); object_property_set_int(OBJECT(&s->cpus), "num-harts", ms->smp.cpus, &error_abort); + object_property_set_int(OBJECT(&s->cpus), "resetvec", 0x8090, &error_abort); sysbus_realize(SYS_BUS_DEVICE(&s->cpus), &error_abort); /* Boot ROM */ diff --git a/hw/riscv/sifive_e.c b/hw/riscv/sifive_e.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/sifive_e.c +++ b/hw/riscv/sifive_e.c @@ -XXX,XX +XXX,XX @@ static void sifive_e_soc_init(Object *obj) object_initialize_child(obj, "cpus", &s->cpus, TYPE_RISCV_HART_ARRAY); object_property_set_int(OBJECT(&s->cpus), "num-harts", ms->smp.cpus, &error_abort); + object_property_set_int(OBJECT(&s->cpus), "resetvec", 0x1004, &error_abort); object_initialize_child(obj, "riscv.sifive.e.gpio0", &s->gpio, TYPE_SIFIVE_GPIO); } diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/sifive_u.c +++ b/hw/riscv/sifive_u.c @@ -XXX,XX +XXX,XX @@ static void sifive_u_soc_instance_init(Object *obj) qdev_prop_set_uint32(DEVICE(&s->e_cpus), "num-harts", 1); qdev_prop_set_uint32(DEVICE(&s->e_cpus), "hartid-base", 0); qdev_prop_set_string(DEVICE(&s->e_cpus), "cpu-type", SIFIVE_E_CPU); + qdev_prop_set_uint64(DEVICE(&s->e_cpus), "resetvec", 0x1004); object_initialize_child(obj, "u-cluster", &s->u_cluster, TYPE_CPU_CLUSTER); qdev_prop_set_uint32(DEVICE(&s->u_cluster), "cluster-id", 1); @@ -XXX,XX +XXX,XX @@ static void sifive_u_soc_instance_init(Object *obj) qdev_prop_set_uint32(DEVICE(&s->u_cpus), "num-harts", ms->smp.cpus - 1); qdev_prop_set_uint32(DEVICE(&s->u_cpus), "hartid-base", 1); qdev_prop_set_string(DEVICE(&s->u_cpus), "cpu-type", SIFIVE_U_CPU); + qdev_prop_set_uint64(DEVICE(&s->u_cpus), "resetvec", 0x1004); object_initialize_child(obj, "prci", &s->prci, TYPE_SIFIVE_U_PRCI); object_initialize_child(obj, "otp", &s->otp, TYPE_SIFIVE_U_OTP); diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_any_cpu_init(Object *obj) CPURISCVState *env = &RISCV_CPU(obj)->env; set_misa(env, RVXLEN | RVI | RVM | RVA | RVF | RVD | RVC | RVU); set_priv_version(env, PRIV_VERSION_1_11_0); - set_resetvec(env, DEFAULT_RSTVEC); } static void riscv_base_cpu_init(Object *obj) @@ -XXX,XX +XXX,XX @@ static void riscv_base_cpu_init(Object *obj) CPURISCVState *env = &RISCV_CPU(obj)->env; /* We set this in the realise function */ set_misa(env, 0); - set_resetvec(env, DEFAULT_RSTVEC); } static void rvxx_sifive_u_cpu_init(Object *obj) @@ -XXX,XX +XXX,XX @@ static void rvxx_sifive_u_cpu_init(Object *obj) CPURISCVState *env = &RISCV_CPU(obj)->env; set_misa(env, RVXLEN | RVI | RVM | RVA | RVF | RVD | RVC | RVS | RVU); set_priv_version(env, PRIV_VERSION_1_10_0); - set_resetvec(env, 0x1004); } static void rvxx_sifive_e_cpu_init(Object *obj) @@ -XXX,XX +XXX,XX @@ static void rvxx_sifive_e_cpu_init(Object *obj) CPURISCVState *env = &RISCV_CPU(obj)->env; set_misa(env, RVXLEN | RVI | RVM | RVA | RVC | RVU); set_priv_version(env, PRIV_VERSION_1_10_0); - set_resetvec(env, 0x1004); qdev_prop_set_bit(DEVICE(obj), "mmu", false); } @@ -XXX,XX +XXX,XX @@ static void rv32_ibex_cpu_init(Object *obj) CPURISCVState *env = &RISCV_CPU(obj)->env; set_misa(env, RV32 | RVI | RVM | RVC | RVU); set_priv_version(env, PRIV_VERSION_1_10_0); - set_resetvec(env, 0x8090); qdev_prop_set_bit(DEVICE(obj), "mmu", false); } @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_realize(DeviceState *dev, Error **errp) set_feature(env, RISCV_FEATURE_PMP); } + set_resetvec(env, cpu->cfg.resetvec); + /* If misa isn't set (rv32 and rv64 machines) set it here */ if (!env->misa) { /* Do some ISA extension error checking */ -- 2.28.0 From: Bin Meng <bin.meng@windriver.com> This is an initial support for Microchip PolarFire SoC Icicle Kit. The Icicle Kit board integrates a PolarFire SoC, with one SiFive's E51 plus four U54 cores and many on-chip peripherals and an FPGA. For more details about Microchip PolarFire Soc, please see: https://www.microsemi.com/product-directory/soc-fpgas/5498-polarfire-soc-fpga Unlike SiFive FU540, the RISC-V core resect vector is at 0x20220000. The following perepherals are created as an unimplemented device: - Bus Error Uint 0/1/2/3/4 - L2 cache controller - SYSREG - MPUCFG - IOSCBCFG More devices will be added later. The BIOS image used by this machine is hss.bin, aka Hart Software Services, which can be built from: https://github.com/polarfire-soc/hart-software-services To launch this machine: $ qemu-system-riscv64 -nographic -M microchip-icicle-kit The memory is set to 1 GiB by default to match the hardware. A sanity check on ram size is performed in the machine init routine to prompt user to increase the RAM size to > 1 GiB when less than 1 GiB ram is detected. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-5-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- default-configs/riscv64-softmmu.mak | 1 + include/hw/riscv/microchip_pfsoc.h | 88 ++++++++ hw/riscv/microchip_pfsoc.c | 312 ++++++++++++++++++++++++++++ MAINTAINERS | 7 + hw/riscv/Kconfig | 6 + hw/riscv/meson.build | 1 + 6 files changed, 415 insertions(+) create mode 100644 include/hw/riscv/microchip_pfsoc.h create mode 100644 hw/riscv/microchip_pfsoc.c diff --git a/default-configs/riscv64-softmmu.mak b/default-configs/riscv64-softmmu.mak index XXXXXXX..XXXXXXX 100644 --- a/default-configs/riscv64-softmmu.mak +++ b/default-configs/riscv64-softmmu.mak @@ -XXX,XX +XXX,XX @@ CONFIG_SPIKE=y CONFIG_SIFIVE_E=y CONFIG_SIFIVE_U=y CONFIG_RISCV_VIRT=y +CONFIG_MICROCHIP_PFSOC=y diff --git a/include/hw/riscv/microchip_pfsoc.h b/include/hw/riscv/microchip_pfsoc.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/riscv/microchip_pfsoc.h @@ -XXX,XX +XXX,XX @@ +/* + * Microchip PolarFire SoC machine interface + * + * Copyright (c) 2020 Wind River Systems, Inc. + * + * Author: + * Bin Meng <bin.meng@windriver.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2 or later, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef HW_MICROCHIP_PFSOC_H +#define HW_MICROCHIP_PFSOC_H + +typedef struct MicrochipPFSoCState { + /*< private >*/ + DeviceState parent_obj; + + /*< public >*/ + CPUClusterState e_cluster; + CPUClusterState u_cluster; + RISCVHartArrayState e_cpus; + RISCVHartArrayState u_cpus; + DeviceState *plic; +} MicrochipPFSoCState; + +#define TYPE_MICROCHIP_PFSOC "microchip.pfsoc" +#define MICROCHIP_PFSOC(obj) \ + OBJECT_CHECK(MicrochipPFSoCState, (obj), TYPE_MICROCHIP_PFSOC) + +typedef struct MicrochipIcicleKitState { + /*< private >*/ + MachineState parent_obj; + + /*< public >*/ + MicrochipPFSoCState soc; +} MicrochipIcicleKitState; + +#define TYPE_MICROCHIP_ICICLE_KIT_MACHINE \ + MACHINE_TYPE_NAME("microchip-icicle-kit") +#define MICROCHIP_ICICLE_KIT_MACHINE(obj) \ + OBJECT_CHECK(MicrochipIcicleKitState, (obj), \ + TYPE_MICROCHIP_ICICLE_KIT_MACHINE) + +enum { + MICROCHIP_PFSOC_DEBUG, + MICROCHIP_PFSOC_E51_DTIM, + MICROCHIP_PFSOC_BUSERR_UNIT0, + MICROCHIP_PFSOC_BUSERR_UNIT1, + MICROCHIP_PFSOC_BUSERR_UNIT2, + MICROCHIP_PFSOC_BUSERR_UNIT3, + MICROCHIP_PFSOC_BUSERR_UNIT4, + MICROCHIP_PFSOC_CLINT, + MICROCHIP_PFSOC_L2CC, + MICROCHIP_PFSOC_L2LIM, + MICROCHIP_PFSOC_PLIC, + MICROCHIP_PFSOC_SYSREG, + MICROCHIP_PFSOC_MPUCFG, + MICROCHIP_PFSOC_ENVM_CFG, + MICROCHIP_PFSOC_ENVM_DATA, + MICROCHIP_PFSOC_IOSCB_CFG, + MICROCHIP_PFSOC_DRAM, +}; + +#define MICROCHIP_PFSOC_MANAGEMENT_CPU_COUNT 1 +#define MICROCHIP_PFSOC_COMPUTE_CPU_COUNT 4 + +#define MICROCHIP_PFSOC_PLIC_HART_CONFIG "MS" +#define MICROCHIP_PFSOC_PLIC_NUM_SOURCES 185 +#define MICROCHIP_PFSOC_PLIC_NUM_PRIORITIES 7 +#define MICROCHIP_PFSOC_PLIC_PRIORITY_BASE 0x04 +#define MICROCHIP_PFSOC_PLIC_PENDING_BASE 0x1000 +#define MICROCHIP_PFSOC_PLIC_ENABLE_BASE 0x2000 +#define MICROCHIP_PFSOC_PLIC_ENABLE_STRIDE 0x80 +#define MICROCHIP_PFSOC_PLIC_CONTEXT_BASE 0x200000 +#define MICROCHIP_PFSOC_PLIC_CONTEXT_STRIDE 0x1000 + +#endif /* HW_MICROCHIP_PFSOC_H */ diff --git a/hw/riscv/microchip_pfsoc.c b/hw/riscv/microchip_pfsoc.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/riscv/microchip_pfsoc.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU RISC-V Board Compatible with Microchip PolarFire SoC Icicle Kit + * + * Copyright (c) 2020 Wind River Systems, Inc. + * + * Author: + * Bin Meng <bin.meng@windriver.com> + * + * Provides a board compatible with the Microchip PolarFire SoC Icicle Kit + * + * 0) CLINT (Core Level Interruptor) + * 1) PLIC (Platform Level Interrupt Controller) + * 2) eNVM (Embedded Non-Volatile Memory) + * + * This board currently generates devicetree dynamically that indicates at least + * two harts and up to five harts. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2 or later, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "qemu/error-report.h" +#include "qemu/log.h" +#include "qemu/units.h" +#include "qemu/cutils.h" +#include "qapi/error.h" +#include "hw/boards.h" +#include "hw/irq.h" +#include "hw/loader.h" +#include "hw/sysbus.h" +#include "hw/cpu/cluster.h" +#include "target/riscv/cpu.h" +#include "hw/misc/unimp.h" +#include "hw/riscv/boot.h" +#include "hw/riscv/riscv_hart.h" +#include "hw/riscv/sifive_clint.h" +#include "hw/riscv/sifive_plic.h" +#include "hw/riscv/microchip_pfsoc.h" + +/* + * The BIOS image used by this machine is called Hart Software Services (HSS). + * See https://github.com/polarfire-soc/hart-software-services + */ +#define BIOS_FILENAME "hss.bin" +#define RESET_VECTOR 0x20220000 + +static const struct MemmapEntry { + hwaddr base; + hwaddr size; +} microchip_pfsoc_memmap[] = { + [MICROCHIP_PFSOC_DEBUG] = { 0x0, 0x1000 }, + [MICROCHIP_PFSOC_E51_DTIM] = { 0x1000000, 0x2000 }, + [MICROCHIP_PFSOC_BUSERR_UNIT0] = { 0x1700000, 0x1000 }, + [MICROCHIP_PFSOC_BUSERR_UNIT1] = { 0x1701000, 0x1000 }, + [MICROCHIP_PFSOC_BUSERR_UNIT2] = { 0x1702000, 0x1000 }, + [MICROCHIP_PFSOC_BUSERR_UNIT3] = { 0x1703000, 0x1000 }, + [MICROCHIP_PFSOC_BUSERR_UNIT4] = { 0x1704000, 0x1000 }, + [MICROCHIP_PFSOC_CLINT] = { 0x2000000, 0x10000 }, + [MICROCHIP_PFSOC_L2CC] = { 0x2010000, 0x1000 }, + [MICROCHIP_PFSOC_L2LIM] = { 0x8000000, 0x2000000 }, + [MICROCHIP_PFSOC_PLIC] = { 0xc000000, 0x4000000 }, + [MICROCHIP_PFSOC_SYSREG] = { 0x20002000, 0x2000 }, + [MICROCHIP_PFSOC_MPUCFG] = { 0x20005000, 0x1000 }, + [MICROCHIP_PFSOC_ENVM_CFG] = { 0x20200000, 0x1000 }, + [MICROCHIP_PFSOC_ENVM_DATA] = { 0x20220000, 0x20000 }, + [MICROCHIP_PFSOC_IOSCB_CFG] = { 0x37080000, 0x1000 }, + [MICROCHIP_PFSOC_DRAM] = { 0x80000000, 0x0 }, +}; + +static void microchip_pfsoc_soc_instance_init(Object *obj) +{ + MachineState *ms = MACHINE(qdev_get_machine()); + MicrochipPFSoCState *s = MICROCHIP_PFSOC(obj); + + object_initialize_child(obj, "e-cluster", &s->e_cluster, TYPE_CPU_CLUSTER); + qdev_prop_set_uint32(DEVICE(&s->e_cluster), "cluster-id", 0); + + object_initialize_child(OBJECT(&s->e_cluster), "e-cpus", &s->e_cpus, + TYPE_RISCV_HART_ARRAY); + qdev_prop_set_uint32(DEVICE(&s->e_cpus), "num-harts", 1); + qdev_prop_set_uint32(DEVICE(&s->e_cpus), "hartid-base", 0); + qdev_prop_set_string(DEVICE(&s->e_cpus), "cpu-type", + TYPE_RISCV_CPU_SIFIVE_E51); + qdev_prop_set_uint64(DEVICE(&s->e_cpus), "resetvec", RESET_VECTOR); + + object_initialize_child(obj, "u-cluster", &s->u_cluster, TYPE_CPU_CLUSTER); + qdev_prop_set_uint32(DEVICE(&s->u_cluster), "cluster-id", 1); + + object_initialize_child(OBJECT(&s->u_cluster), "u-cpus", &s->u_cpus, + TYPE_RISCV_HART_ARRAY); + qdev_prop_set_uint32(DEVICE(&s->u_cpus), "num-harts", ms->smp.cpus - 1); + qdev_prop_set_uint32(DEVICE(&s->u_cpus), "hartid-base", 1); + qdev_prop_set_string(DEVICE(&s->u_cpus), "cpu-type", + TYPE_RISCV_CPU_SIFIVE_U54); + qdev_prop_set_uint64(DEVICE(&s->u_cpus), "resetvec", RESET_VECTOR); +} + +static void microchip_pfsoc_soc_realize(DeviceState *dev, Error **errp) +{ + MachineState *ms = MACHINE(qdev_get_machine()); + MicrochipPFSoCState *s = MICROCHIP_PFSOC(dev); + const struct MemmapEntry *memmap = microchip_pfsoc_memmap; + MemoryRegion *system_memory = get_system_memory(); + MemoryRegion *e51_dtim_mem = g_new(MemoryRegion, 1); + MemoryRegion *l2lim_mem = g_new(MemoryRegion, 1); + MemoryRegion *envm_data = g_new(MemoryRegion, 1); + char *plic_hart_config; + size_t plic_hart_config_len; + int i; + + sysbus_realize(SYS_BUS_DEVICE(&s->e_cpus), &error_abort); + sysbus_realize(SYS_BUS_DEVICE(&s->u_cpus), &error_abort); + /* + * The cluster must be realized after the RISC-V hart array container, + * as the container's CPU object is only created on realize, and the + * CPU must exist and have been parented into the cluster before the + * cluster is realized. + */ + qdev_realize(DEVICE(&s->e_cluster), NULL, &error_abort); + qdev_realize(DEVICE(&s->u_cluster), NULL, &error_abort); + + /* E51 DTIM */ + memory_region_init_ram(e51_dtim_mem, NULL, "microchip.pfsoc.e51_dtim_mem", + memmap[MICROCHIP_PFSOC_E51_DTIM].size, &error_fatal); + memory_region_add_subregion(system_memory, + memmap[MICROCHIP_PFSOC_E51_DTIM].base, + e51_dtim_mem); + + /* Bus Error Units */ + create_unimplemented_device("microchip.pfsoc.buserr_unit0_mem", + memmap[MICROCHIP_PFSOC_BUSERR_UNIT0].base, + memmap[MICROCHIP_PFSOC_BUSERR_UNIT0].size); + create_unimplemented_device("microchip.pfsoc.buserr_unit1_mem", + memmap[MICROCHIP_PFSOC_BUSERR_UNIT1].base, + memmap[MICROCHIP_PFSOC_BUSERR_UNIT1].size); + create_unimplemented_device("microchip.pfsoc.buserr_unit2_mem", + memmap[MICROCHIP_PFSOC_BUSERR_UNIT2].base, + memmap[MICROCHIP_PFSOC_BUSERR_UNIT2].size); + create_unimplemented_device("microchip.pfsoc.buserr_unit3_mem", + memmap[MICROCHIP_PFSOC_BUSERR_UNIT3].base, + memmap[MICROCHIP_PFSOC_BUSERR_UNIT3].size); + create_unimplemented_device("microchip.pfsoc.buserr_unit4_mem", + memmap[MICROCHIP_PFSOC_BUSERR_UNIT4].base, + memmap[MICROCHIP_PFSOC_BUSERR_UNIT4].size); + + /* CLINT */ + sifive_clint_create(memmap[MICROCHIP_PFSOC_CLINT].base, + memmap[MICROCHIP_PFSOC_CLINT].size, 0, ms->smp.cpus, + SIFIVE_SIP_BASE, SIFIVE_TIMECMP_BASE, SIFIVE_TIME_BASE, false); + + /* L2 cache controller */ + create_unimplemented_device("microchip.pfsoc.l2cc", + memmap[MICROCHIP_PFSOC_L2CC].base, memmap[MICROCHIP_PFSOC_L2CC].size); + + /* + * Add L2-LIM at reset size. + * This should be reduced in size as the L2 Cache Controller WayEnable + * register is incremented. Unfortunately I don't see a nice (or any) way + * to handle reducing or blocking out the L2 LIM while still allowing it + * be re returned to all enabled after a reset. For the time being, just + * leave it enabled all the time. This won't break anything, but will be + * too generous to misbehaving guests. + */ + memory_region_init_ram(l2lim_mem, NULL, "microchip.pfsoc.l2lim", + memmap[MICROCHIP_PFSOC_L2LIM].size, &error_fatal); + memory_region_add_subregion(system_memory, + memmap[MICROCHIP_PFSOC_L2LIM].base, + l2lim_mem); + + /* create PLIC hart topology configuration string */ + plic_hart_config_len = (strlen(MICROCHIP_PFSOC_PLIC_HART_CONFIG) + 1) * + ms->smp.cpus; + plic_hart_config = g_malloc0(plic_hart_config_len); + for (i = 0; i < ms->smp.cpus; i++) { + if (i != 0) { + strncat(plic_hart_config, "," MICROCHIP_PFSOC_PLIC_HART_CONFIG, + plic_hart_config_len); + } else { + strncat(plic_hart_config, "M", plic_hart_config_len); + } + plic_hart_config_len -= (strlen(MICROCHIP_PFSOC_PLIC_HART_CONFIG) + 1); + } + + /* PLIC */ + s->plic = sifive_plic_create(memmap[MICROCHIP_PFSOC_PLIC].base, + plic_hart_config, 0, + MICROCHIP_PFSOC_PLIC_NUM_SOURCES, + MICROCHIP_PFSOC_PLIC_NUM_PRIORITIES, + MICROCHIP_PFSOC_PLIC_PRIORITY_BASE, + MICROCHIP_PFSOC_PLIC_PENDING_BASE, + MICROCHIP_PFSOC_PLIC_ENABLE_BASE, + MICROCHIP_PFSOC_PLIC_ENABLE_STRIDE, + MICROCHIP_PFSOC_PLIC_CONTEXT_BASE, + MICROCHIP_PFSOC_PLIC_CONTEXT_STRIDE, + memmap[MICROCHIP_PFSOC_PLIC].size); + g_free(plic_hart_config); + + /* SYSREG */ + create_unimplemented_device("microchip.pfsoc.sysreg", + memmap[MICROCHIP_PFSOC_SYSREG].base, + memmap[MICROCHIP_PFSOC_SYSREG].size); + + /* MPUCFG */ + create_unimplemented_device("microchip.pfsoc.mpucfg", + memmap[MICROCHIP_PFSOC_MPUCFG].base, + memmap[MICROCHIP_PFSOC_MPUCFG].size); + + /* eNVM */ + memory_region_init_rom(envm_data, OBJECT(dev), "microchip.pfsoc.envm.data", + memmap[MICROCHIP_PFSOC_ENVM_DATA].size, + &error_fatal); + memory_region_add_subregion(system_memory, + memmap[MICROCHIP_PFSOC_ENVM_DATA].base, + envm_data); + + /* IOSCBCFG */ + create_unimplemented_device("microchip.pfsoc.ioscb.cfg", + memmap[MICROCHIP_PFSOC_IOSCB_CFG].base, + memmap[MICROCHIP_PFSOC_IOSCB_CFG].size); +} + +static void microchip_pfsoc_soc_class_init(ObjectClass *oc, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(oc); + + dc->realize = microchip_pfsoc_soc_realize; + /* Reason: Uses serial_hds in realize function, thus can't be used twice */ + dc->user_creatable = false; +} + +static const TypeInfo microchip_pfsoc_soc_type_info = { + .name = TYPE_MICROCHIP_PFSOC, + .parent = TYPE_DEVICE, + .instance_size = sizeof(MicrochipPFSoCState), + .instance_init = microchip_pfsoc_soc_instance_init, + .class_init = microchip_pfsoc_soc_class_init, +}; + +static void microchip_pfsoc_soc_register_types(void) +{ + type_register_static(&microchip_pfsoc_soc_type_info); +} + +type_init(microchip_pfsoc_soc_register_types) + +static void microchip_icicle_kit_machine_init(MachineState *machine) +{ + MachineClass *mc = MACHINE_GET_CLASS(machine); + const struct MemmapEntry *memmap = microchip_pfsoc_memmap; + MicrochipIcicleKitState *s = MICROCHIP_ICICLE_KIT_MACHINE(machine); + MemoryRegion *system_memory = get_system_memory(); + MemoryRegion *main_mem = g_new(MemoryRegion, 1); + + /* Sanity check on RAM size */ + if (machine->ram_size < mc->default_ram_size) { + char *sz = size_to_str(mc->default_ram_size); + error_report("Invalid RAM size, should be bigger than %s", sz); + g_free(sz); + exit(EXIT_FAILURE); + } + + /* Initialize SoC */ + object_initialize_child(OBJECT(machine), "soc", &s->soc, + TYPE_MICROCHIP_PFSOC); + qdev_realize(DEVICE(&s->soc), NULL, &error_abort); + + /* Register RAM */ + memory_region_init_ram(main_mem, NULL, "microchip.icicle.kit.ram", + machine->ram_size, &error_fatal); + memory_region_add_subregion(system_memory, + memmap[MICROCHIP_PFSOC_DRAM].base, main_mem); + + /* Load the firmware */ + riscv_find_and_load_firmware(machine, BIOS_FILENAME, RESET_VECTOR, NULL); +} + +static void microchip_icicle_kit_machine_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + + mc->desc = "Microchip PolarFire SoC Icicle Kit"; + mc->init = microchip_icicle_kit_machine_init; + mc->max_cpus = MICROCHIP_PFSOC_MANAGEMENT_CPU_COUNT + + MICROCHIP_PFSOC_COMPUTE_CPU_COUNT; + mc->min_cpus = MICROCHIP_PFSOC_MANAGEMENT_CPU_COUNT + 1; + mc->default_cpus = mc->min_cpus; + mc->default_ram_size = 1 * GiB; +} + +static const TypeInfo microchip_icicle_kit_machine_typeinfo = { + .name = MACHINE_TYPE_NAME("microchip-icicle-kit"), + .parent = TYPE_MACHINE, + .class_init = microchip_icicle_kit_machine_class_init, + .instance_size = sizeof(MicrochipIcicleKitState), +}; + +static void microchip_icicle_kit_machine_init_register_types(void) +{ + type_register_static(&microchip_icicle_kit_machine_typeinfo); +} + +type_init(microchip_icicle_kit_machine_init_register_types) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/riscv/opentitan.h F: include/hw/char/ibex_uart.h F: include/hw/intc/ibex_plic.h +Microchip PolarFire SoC Icicle Kit +M: Bin Meng <bin.meng@windriver.com> +L: qemu-riscv@nongnu.org +S: Supported +F: hw/riscv/microchip_pfsoc.c +F: include/hw/riscv/microchip_pfsoc.h + RX Machines ----------- rx-gdbsim diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/Kconfig +++ b/hw/riscv/Kconfig @@ -XXX,XX +XXX,XX @@ config RISCV_VIRT select PCI_EXPRESS_GENERIC_BRIDGE select PFLASH_CFI01 select SIFIVE + +config MICROCHIP_PFSOC + bool + select HART + select SIFIVE + select UNIMP diff --git a/hw/riscv/meson.build b/hw/riscv/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/meson.build +++ b/hw/riscv/meson.build @@ -XXX,XX +XXX,XX @@ riscv_ss.add(when: 'CONFIG_SIFIVE_U', if_true: files('sifive_u_otp.c')) riscv_ss.add(when: 'CONFIG_SIFIVE_U', if_true: files('sifive_u_prci.c')) riscv_ss.add(when: 'CONFIG_SPIKE', if_true: files('riscv_htif.c')) riscv_ss.add(when: 'CONFIG_SPIKE', if_true: files('spike.c')) +riscv_ss.add(when: 'CONFIG_MICROCHIP_PFSOC', if_true: files('microchip_pfsoc.c')) hw_arch += {'riscv': riscv_ss} -- 2.28.0 From: Bin Meng <bin.meng@windriver.com> Microchip PolarFire SoC MMUART is ns16550 compatible, with some additional registers. Create a simple MMUART model built on top of the existing ns16550 model. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-6-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/char/mchp_pfsoc_mmuart.h | 61 ++++++++++++++++++++ hw/char/mchp_pfsoc_mmuart.c | 86 +++++++++++++++++++++++++++++ MAINTAINERS | 2 + hw/char/Kconfig | 3 + hw/char/meson.build | 1 + 5 files changed, 153 insertions(+) create mode 100644 include/hw/char/mchp_pfsoc_mmuart.h create mode 100644 hw/char/mchp_pfsoc_mmuart.c diff --git a/include/hw/char/mchp_pfsoc_mmuart.h b/include/hw/char/mchp_pfsoc_mmuart.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/char/mchp_pfsoc_mmuart.h @@ -XXX,XX +XXX,XX @@ +/* + * Microchip PolarFire SoC MMUART emulation + * + * Copyright (c) 2020 Wind River Systems, Inc. + * + * Author: + * Bin Meng <bin.meng@windriver.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef HW_MCHP_PFSOC_MMUART_H +#define HW_MCHP_PFSOC_MMUART_H + +#include "hw/char/serial.h" + +#define MCHP_PFSOC_MMUART_REG_SIZE 52 + +typedef struct MchpPfSoCMMUartState { + MemoryRegion iomem; + hwaddr base; + qemu_irq irq; + + SerialMM *serial; + + uint32_t reg[MCHP_PFSOC_MMUART_REG_SIZE / sizeof(uint32_t)]; +} MchpPfSoCMMUartState; + +/** + * mchp_pfsoc_mmuart_create - Create a Microchip PolarFire SoC MMUART + * + * This is a helper routine for board to create a MMUART device that is + * compatible with Microchip PolarFire SoC. + * + * @sysmem: system memory region to map + * @base: base address of the MMUART registers + * @irq: IRQ number of the MMUART device + * @chr: character device to associate to + * + * @return: a pointer to the device specific control structure + */ +MchpPfSoCMMUartState *mchp_pfsoc_mmuart_create(MemoryRegion *sysmem, + hwaddr base, qemu_irq irq, Chardev *chr); + +#endif /* HW_MCHP_PFSOC_MMUART_H */ diff --git a/hw/char/mchp_pfsoc_mmuart.c b/hw/char/mchp_pfsoc_mmuart.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/char/mchp_pfsoc_mmuart.c @@ -XXX,XX +XXX,XX @@ +/* + * Microchip PolarFire SoC MMUART emulation + * + * Copyright (c) 2020 Wind River Systems, Inc. + * + * Author: + * Bin Meng <bin.meng@windriver.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 or + * (at your option) version 3 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "chardev/char.h" +#include "exec/address-spaces.h" +#include "hw/char/mchp_pfsoc_mmuart.h" + +static uint64_t mchp_pfsoc_mmuart_read(void *opaque, hwaddr addr, unsigned size) +{ + MchpPfSoCMMUartState *s = opaque; + + if (addr >= MCHP_PFSOC_MMUART_REG_SIZE) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: read: addr=0x%" HWADDR_PRIx "\n", + __func__, addr); + return 0; + } + + return s->reg[addr / sizeof(uint32_t)]; +} + +static void mchp_pfsoc_mmuart_write(void *opaque, hwaddr addr, + uint64_t value, unsigned size) +{ + MchpPfSoCMMUartState *s = opaque; + uint32_t val32 = (uint32_t)value; + + if (addr >= MCHP_PFSOC_MMUART_REG_SIZE) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: bad write: addr=0x%" HWADDR_PRIx + " v=0x%x\n", __func__, addr, val32); + return; + } + + s->reg[addr / sizeof(uint32_t)] = val32; +} + +static const MemoryRegionOps mchp_pfsoc_mmuart_ops = { + .read = mchp_pfsoc_mmuart_read, + .write = mchp_pfsoc_mmuart_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .impl = { + .min_access_size = 4, + .max_access_size = 4, + }, +}; + +MchpPfSoCMMUartState *mchp_pfsoc_mmuart_create(MemoryRegion *sysmem, + hwaddr base, qemu_irq irq, Chardev *chr) +{ + MchpPfSoCMMUartState *s; + + s = g_new0(MchpPfSoCMMUartState, 1); + + memory_region_init_io(&s->iomem, NULL, &mchp_pfsoc_mmuart_ops, s, + "mchp.pfsoc.mmuart", 0x1000); + + s->base = base; + s->irq = irq; + + s->serial = serial_mm_init(sysmem, base, 2, irq, 399193, chr, + DEVICE_LITTLE_ENDIAN); + + memory_region_add_subregion(sysmem, base + 0x20, &s->iomem); + + return s; +} diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ M: Bin Meng <bin.meng@windriver.com> L: qemu-riscv@nongnu.org S: Supported F: hw/riscv/microchip_pfsoc.c +F: hw/char/mchp_pfsoc_mmuart.c F: include/hw/riscv/microchip_pfsoc.h +F: include/hw/char/mchp_pfsoc_mmuart.h RX Machines ----------- diff --git a/hw/char/Kconfig b/hw/char/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/char/Kconfig +++ b/hw/char/Kconfig @@ -XXX,XX +XXX,XX @@ config RENESAS_SCI config AVR_USART bool + +config MCHP_PFSOC_MMUART + bool diff --git a/hw/char/meson.build b/hw/char/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/char/meson.build +++ b/hw/char/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_RASPI', if_true: files('bcm2835_aux.c')) softmmu_ss.add(when: 'CONFIG_RENESAS_SCI', if_true: files('renesas_sci.c')) softmmu_ss.add(when: 'CONFIG_SH4', if_true: files('sh_serial.c')) softmmu_ss.add(when: 'CONFIG_STM32F2XX_USART', if_true: files('stm32f2xx_usart.c')) +softmmu_ss.add(when: 'CONFIG_MCHP_PFSOC_MMUART', if_true: files('mchp_pfsoc_mmuart.c')) specific_ss.add(when: 'CONFIG_TERMINAL3270', if_true: files('terminal3270.c')) specific_ss.add(when: 'CONFIG_VIRTIO', if_true: files('virtio-serial-bus.c')) -- 2.28.0 From: Bin Meng <bin.meng@windriver.com> Microchip PolarFire SoC has 5 MMUARTs, and the Icicle Kit board wires 4 of them out. Let's connect all 5 MMUARTs. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-7-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/riscv/microchip_pfsoc.h | 20 ++++++++++++++++++++ hw/riscv/microchip_pfsoc.c | 30 ++++++++++++++++++++++++++++++ hw/riscv/Kconfig | 1 + 3 files changed, 51 insertions(+) diff --git a/include/hw/riscv/microchip_pfsoc.h b/include/hw/riscv/microchip_pfsoc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/riscv/microchip_pfsoc.h +++ b/include/hw/riscv/microchip_pfsoc.h @@ -XXX,XX +XXX,XX @@ #ifndef HW_MICROCHIP_PFSOC_H #define HW_MICROCHIP_PFSOC_H +#include "hw/char/mchp_pfsoc_mmuart.h" + typedef struct MicrochipPFSoCState { /*< private >*/ DeviceState parent_obj; @@ -XXX,XX +XXX,XX @@ typedef struct MicrochipPFSoCState { RISCVHartArrayState e_cpus; RISCVHartArrayState u_cpus; DeviceState *plic; + MchpPfSoCMMUartState *serial0; + MchpPfSoCMMUartState *serial1; + MchpPfSoCMMUartState *serial2; + MchpPfSoCMMUartState *serial3; + MchpPfSoCMMUartState *serial4; } MicrochipPFSoCState; #define TYPE_MICROCHIP_PFSOC "microchip.pfsoc" @@ -XXX,XX +XXX,XX @@ enum { MICROCHIP_PFSOC_L2CC, MICROCHIP_PFSOC_L2LIM, MICROCHIP_PFSOC_PLIC, + MICROCHIP_PFSOC_MMUART0, MICROCHIP_PFSOC_SYSREG, MICROCHIP_PFSOC_MPUCFG, + MICROCHIP_PFSOC_MMUART1, + MICROCHIP_PFSOC_MMUART2, + MICROCHIP_PFSOC_MMUART3, + MICROCHIP_PFSOC_MMUART4, MICROCHIP_PFSOC_ENVM_CFG, MICROCHIP_PFSOC_ENVM_DATA, MICROCHIP_PFSOC_IOSCB_CFG, MICROCHIP_PFSOC_DRAM, }; +enum { + MICROCHIP_PFSOC_MMUART0_IRQ = 90, + MICROCHIP_PFSOC_MMUART1_IRQ = 91, + MICROCHIP_PFSOC_MMUART2_IRQ = 92, + MICROCHIP_PFSOC_MMUART3_IRQ = 93, + MICROCHIP_PFSOC_MMUART4_IRQ = 94, +}; + #define MICROCHIP_PFSOC_MANAGEMENT_CPU_COUNT 1 #define MICROCHIP_PFSOC_COMPUTE_CPU_COUNT 4 diff --git a/hw/riscv/microchip_pfsoc.c b/hw/riscv/microchip_pfsoc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/microchip_pfsoc.c +++ b/hw/riscv/microchip_pfsoc.c @@ -XXX,XX +XXX,XX @@ * 0) CLINT (Core Level Interruptor) * 1) PLIC (Platform Level Interrupt Controller) * 2) eNVM (Embedded Non-Volatile Memory) + * 3) MMUARTs (Multi-Mode UART) * * This board currently generates devicetree dynamically that indicates at least * two harts and up to five harts. @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "hw/loader.h" #include "hw/sysbus.h" +#include "chardev/char.h" #include "hw/cpu/cluster.h" #include "target/riscv/cpu.h" #include "hw/misc/unimp.h" @@ -XXX,XX +XXX,XX @@ #include "hw/riscv/sifive_clint.h" #include "hw/riscv/sifive_plic.h" #include "hw/riscv/microchip_pfsoc.h" +#include "sysemu/sysemu.h" /* * The BIOS image used by this machine is called Hart Software Services (HSS). @@ -XXX,XX +XXX,XX @@ static const struct MemmapEntry { [MICROCHIP_PFSOC_L2CC] = { 0x2010000, 0x1000 }, [MICROCHIP_PFSOC_L2LIM] = { 0x8000000, 0x2000000 }, [MICROCHIP_PFSOC_PLIC] = { 0xc000000, 0x4000000 }, + [MICROCHIP_PFSOC_MMUART0] = { 0x20000000, 0x1000 }, [MICROCHIP_PFSOC_SYSREG] = { 0x20002000, 0x2000 }, [MICROCHIP_PFSOC_MPUCFG] = { 0x20005000, 0x1000 }, + [MICROCHIP_PFSOC_MMUART1] = { 0x20100000, 0x1000 }, + [MICROCHIP_PFSOC_MMUART2] = { 0x20102000, 0x1000 }, + [MICROCHIP_PFSOC_MMUART3] = { 0x20104000, 0x1000 }, + [MICROCHIP_PFSOC_MMUART4] = { 0x20106000, 0x1000 }, [MICROCHIP_PFSOC_ENVM_CFG] = { 0x20200000, 0x1000 }, [MICROCHIP_PFSOC_ENVM_DATA] = { 0x20220000, 0x20000 }, [MICROCHIP_PFSOC_IOSCB_CFG] = { 0x37080000, 0x1000 }, @@ -XXX,XX +XXX,XX @@ static void microchip_pfsoc_soc_realize(DeviceState *dev, Error **errp) memmap[MICROCHIP_PFSOC_MPUCFG].base, memmap[MICROCHIP_PFSOC_MPUCFG].size); + /* MMUARTs */ + s->serial0 = mchp_pfsoc_mmuart_create(system_memory, + memmap[MICROCHIP_PFSOC_MMUART0].base, + qdev_get_gpio_in(DEVICE(s->plic), MICROCHIP_PFSOC_MMUART0_IRQ), + serial_hd(0)); + s->serial1 = mchp_pfsoc_mmuart_create(system_memory, + memmap[MICROCHIP_PFSOC_MMUART1].base, + qdev_get_gpio_in(DEVICE(s->plic), MICROCHIP_PFSOC_MMUART1_IRQ), + serial_hd(1)); + s->serial2 = mchp_pfsoc_mmuart_create(system_memory, + memmap[MICROCHIP_PFSOC_MMUART2].base, + qdev_get_gpio_in(DEVICE(s->plic), MICROCHIP_PFSOC_MMUART2_IRQ), + serial_hd(2)); + s->serial3 = mchp_pfsoc_mmuart_create(system_memory, + memmap[MICROCHIP_PFSOC_MMUART3].base, + qdev_get_gpio_in(DEVICE(s->plic), MICROCHIP_PFSOC_MMUART3_IRQ), + serial_hd(3)); + s->serial4 = mchp_pfsoc_mmuart_create(system_memory, + memmap[MICROCHIP_PFSOC_MMUART4].base, + qdev_get_gpio_in(DEVICE(s->plic), MICROCHIP_PFSOC_MMUART4_IRQ), + serial_hd(4)); + /* eNVM */ memory_region_init_rom(envm_data, OBJECT(dev), "microchip.pfsoc.envm.data", memmap[MICROCHIP_PFSOC_ENVM_DATA].size, diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/Kconfig +++ b/hw/riscv/Kconfig @@ -XXX,XX +XXX,XX @@ config MICROCHIP_PFSOC select HART select SIFIVE select UNIMP + select MCHP_PFSOC_MMUART -- 2.28.0 From: Bin Meng <bin.meng@windriver.com> Cadence SD/SDIO/eMMC Host Controller (SD4HC) is an SDHCI compatible controller. The SDHCI compatible registers start from offset 0x200, which are called Slot Register Set (SRS) in its datasheet. This creates a Cadence SDHCI model built on top of the existing generic SDHCI model. Cadence specific Host Register Set (HRS) is implemented to make guest software happy. Signed-off-by: Bin Meng <bin.meng@windriver.com> Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-8-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/sd/cadence_sdhci.h | 47 +++++++++ hw/sd/cadence_sdhci.c | 193 ++++++++++++++++++++++++++++++++++ hw/sd/Kconfig | 4 + hw/sd/meson.build | 1 + 4 files changed, 245 insertions(+) create mode 100644 include/hw/sd/cadence_sdhci.h create mode 100644 hw/sd/cadence_sdhci.c diff --git a/include/hw/sd/cadence_sdhci.h b/include/hw/sd/cadence_sdhci.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/sd/cadence_sdhci.h @@ -XXX,XX +XXX,XX @@ +/* + * Cadence SDHCI emulation + * + * Copyright (c) 2020 Wind River Systems, Inc. + * + * Author: + * Bin Meng <bin.meng@windriver.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 or + * (at your option) version 3 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef CADENCE_SDHCI_H +#define CADENCE_SDHCI_H + +#include "hw/sd/sdhci.h" + +#define CADENCE_SDHCI_REG_SIZE 0x100 +#define CADENCE_SDHCI_NUM_REGS (CADENCE_SDHCI_REG_SIZE / sizeof(uint32_t)) + +typedef struct CadenceSDHCIState { + SysBusDevice parent; + + MemoryRegion container; + MemoryRegion iomem; + BusState *bus; + + uint32_t regs[CADENCE_SDHCI_NUM_REGS]; + + SDHCIState sdhci; +} CadenceSDHCIState; + +#define TYPE_CADENCE_SDHCI "cadence.sdhci" +#define CADENCE_SDHCI(obj) OBJECT_CHECK(CadenceSDHCIState, (obj), \ + TYPE_CADENCE_SDHCI) + +#endif /* CADENCE_SDHCI_H */ diff --git a/hw/sd/cadence_sdhci.c b/hw/sd/cadence_sdhci.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/sd/cadence_sdhci.c @@ -XXX,XX +XXX,XX @@ +/* + * Cadence SDHCI emulation + * + * Copyright (c) 2020 Wind River Systems, Inc. + * + * Author: + * Bin Meng <bin.meng@windriver.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 or + * (at your option) version 3 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "qemu/bitops.h" +#include "qemu/error-report.h" +#include "qemu/log.h" +#include "qapi/error.h" +#include "migration/vmstate.h" +#include "hw/irq.h" +#include "hw/sd/cadence_sdhci.h" +#include "sdhci-internal.h" + +/* HRS - Host Register Set (specific to Cadence) */ + +#define CADENCE_SDHCI_HRS00 0x00 /* general information */ +#define CADENCE_SDHCI_HRS00_SWR BIT(0) +#define CADENCE_SDHCI_HRS00_POR_VAL 0x00010000 + +#define CADENCE_SDHCI_HRS04 0x10 /* PHY access port */ +#define CADENCE_SDHCI_HRS04_WR BIT(24) +#define CADENCE_SDHCI_HRS04_RD BIT(25) +#define CADENCE_SDHCI_HRS04_ACK BIT(26) + +#define CADENCE_SDHCI_HRS06 0x18 /* eMMC control */ +#define CADENCE_SDHCI_HRS06_TUNE_UP BIT(15) + +/* SRS - Slot Register Set (SDHCI-compatible) */ + +#define CADENCE_SDHCI_SRS_BASE 0x200 + +#define TO_REG(addr) ((addr) / sizeof(uint32_t)) + +static void cadence_sdhci_instance_init(Object *obj) +{ + CadenceSDHCIState *s = CADENCE_SDHCI(obj); + + object_initialize_child(OBJECT(s), "generic-sdhci", + &s->sdhci, TYPE_SYSBUS_SDHCI); +} + +static void cadence_sdhci_reset(DeviceState *dev) +{ + CadenceSDHCIState *s = CADENCE_SDHCI(dev); + + memset(s->regs, 0, CADENCE_SDHCI_REG_SIZE); + s->regs[TO_REG(CADENCE_SDHCI_HRS00)] = CADENCE_SDHCI_HRS00_POR_VAL; + + device_cold_reset(DEVICE(&s->sdhci)); +} + +static uint64_t cadence_sdhci_read(void *opaque, hwaddr addr, unsigned int size) +{ + CadenceSDHCIState *s = opaque; + uint32_t val; + + val = s->regs[TO_REG(addr)]; + + return (uint64_t)val; +} + +static void cadence_sdhci_write(void *opaque, hwaddr addr, uint64_t val, + unsigned int size) +{ + CadenceSDHCIState *s = opaque; + uint32_t val32 = (uint32_t)val; + + switch (addr) { + case CADENCE_SDHCI_HRS00: + /* + * The only writable bit is SWR (software reset) and it automatically + * clears to zero, so essentially this register remains unchanged. + */ + if (val32 & CADENCE_SDHCI_HRS00_SWR) { + cadence_sdhci_reset(DEVICE(s)); + } + + break; + case CADENCE_SDHCI_HRS04: + /* + * Only emulate the ACK bit behavior when read or write transaction + * are requested. + */ + if (val32 & (CADENCE_SDHCI_HRS04_WR | CADENCE_SDHCI_HRS04_RD)) { + val32 |= CADENCE_SDHCI_HRS04_ACK; + } else { + val32 &= ~CADENCE_SDHCI_HRS04_ACK; + } + + s->regs[TO_REG(addr)] = val32; + break; + case CADENCE_SDHCI_HRS06: + if (val32 & CADENCE_SDHCI_HRS06_TUNE_UP) { + val32 &= ~CADENCE_SDHCI_HRS06_TUNE_UP; + } + + s->regs[TO_REG(addr)] = val32; + break; + default: + s->regs[TO_REG(addr)] = val32; + break; + } +} + +static const MemoryRegionOps cadence_sdhci_ops = { + .read = cadence_sdhci_read, + .write = cadence_sdhci_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .impl = { + .min_access_size = 4, + .max_access_size = 4, + }, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + } +}; + +static void cadence_sdhci_realize(DeviceState *dev, Error **errp) +{ + CadenceSDHCIState *s = CADENCE_SDHCI(dev); + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); + SysBusDevice *sbd_sdhci = SYS_BUS_DEVICE(&s->sdhci); + + memory_region_init(&s->container, OBJECT(s), + "cadence.sdhci-container", 0x1000); + sysbus_init_mmio(sbd, &s->container); + + memory_region_init_io(&s->iomem, OBJECT(s), &cadence_sdhci_ops, + s, TYPE_CADENCE_SDHCI, CADENCE_SDHCI_REG_SIZE); + memory_region_add_subregion(&s->container, 0, &s->iomem); + + sysbus_realize(sbd_sdhci, errp); + memory_region_add_subregion(&s->container, CADENCE_SDHCI_SRS_BASE, + sysbus_mmio_get_region(sbd_sdhci, 0)); + + /* propagate irq and "sd-bus" from generic-sdhci */ + sysbus_pass_irq(sbd, sbd_sdhci); + s->bus = qdev_get_child_bus(DEVICE(sbd_sdhci), "sd-bus"); +} + +static const VMStateDescription vmstate_cadence_sdhci = { + .name = TYPE_CADENCE_SDHCI, + .version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, CadenceSDHCIState, CADENCE_SDHCI_NUM_REGS), + VMSTATE_END_OF_LIST(), + }, +}; + +static void cadence_sdhci_class_init(ObjectClass *classp, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(classp); + + dc->desc = "Cadence SD/SDIO/eMMC Host Controller (SD4HC)"; + dc->realize = cadence_sdhci_realize; + dc->reset = cadence_sdhci_reset; + dc->vmsd = &vmstate_cadence_sdhci; +} + +static TypeInfo cadence_sdhci_info = { + .name = TYPE_CADENCE_SDHCI, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(CadenceSDHCIState), + .instance_init = cadence_sdhci_instance_init, + .class_init = cadence_sdhci_class_init, +}; + +static void cadence_sdhci_register_types(void) +{ + type_register_static(&cadence_sdhci_info); +} + +type_init(cadence_sdhci_register_types) diff --git a/hw/sd/Kconfig b/hw/sd/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/Kconfig +++ b/hw/sd/Kconfig @@ -XXX,XX +XXX,XX @@ config SDHCI_PCI default y if PCI_DEVICES depends on PCI select SDHCI + +config CADENCE_SDHCI + bool + select SDHCI diff --git a/hw/sd/meson.build b/hw/sd/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/meson.build +++ b/hw/sd/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_PXA2XX', if_true: files('pxa2xx_mmci.c')) softmmu_ss.add(when: 'CONFIG_RASPI', if_true: files('bcm2835_sdhost.c')) softmmu_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_sdhci.c')) softmmu_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-sdhost.c')) +softmmu_ss.add(when: 'CONFIG_CADENCE_SDHCI', if_true: files('cadence_sdhci.c')) -- 2.28.0 From: Bin Meng <bin.meng@windriver.com> Microchip PolarFire SoC integrates one Cadence SDHCI controller. On the Icicle Kit board, one eMMC chip and an external SD card connect to this controller depending on different configuration. As QEMU does not support eMMC yet, we just emulate the SD card configuration. To test this, the Hart Software Services (HSS) should choose the SD card configuration: $ cp boards/icicle-kit-es/def_config.sdcard .config $ make BOARD=icicle-kit-es The SD card image can be built from the Yocto BSP at: https://github.com/polarfire-soc/meta-polarfire-soc-yocto-bsp Note the generated SD card image should be resized before use: $ qemu-img resize /path/to/sdcard.img 4G Launch QEMU with the following command: $ qemu-system-riscv64 -nographic -M microchip-icicle-kit -sd sdcard.img Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-9-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/riscv/microchip_pfsoc.h | 4 ++++ hw/riscv/microchip_pfsoc.c | 23 +++++++++++++++++++++++ hw/riscv/Kconfig | 1 + 3 files changed, 28 insertions(+) diff --git a/include/hw/riscv/microchip_pfsoc.h b/include/hw/riscv/microchip_pfsoc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/riscv/microchip_pfsoc.h +++ b/include/hw/riscv/microchip_pfsoc.h @@ -XXX,XX +XXX,XX @@ #define HW_MICROCHIP_PFSOC_H #include "hw/char/mchp_pfsoc_mmuart.h" +#include "hw/sd/cadence_sdhci.h" typedef struct MicrochipPFSoCState { /*< private >*/ @@ -XXX,XX +XXX,XX @@ typedef struct MicrochipPFSoCState { MchpPfSoCMMUartState *serial2; MchpPfSoCMMUartState *serial3; MchpPfSoCMMUartState *serial4; + CadenceSDHCIState sdhci; } MicrochipPFSoCState; #define TYPE_MICROCHIP_PFSOC "microchip.pfsoc" @@ -XXX,XX +XXX,XX @@ enum { MICROCHIP_PFSOC_MMUART0, MICROCHIP_PFSOC_SYSREG, MICROCHIP_PFSOC_MPUCFG, + MICROCHIP_PFSOC_EMMC_SD, MICROCHIP_PFSOC_MMUART1, MICROCHIP_PFSOC_MMUART2, MICROCHIP_PFSOC_MMUART3, @@ -XXX,XX +XXX,XX @@ enum { }; enum { + MICROCHIP_PFSOC_EMMC_SD_IRQ = 88, MICROCHIP_PFSOC_MMUART0_IRQ = 90, MICROCHIP_PFSOC_MMUART1_IRQ = 91, MICROCHIP_PFSOC_MMUART2_IRQ = 92, diff --git a/hw/riscv/microchip_pfsoc.c b/hw/riscv/microchip_pfsoc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/microchip_pfsoc.c +++ b/hw/riscv/microchip_pfsoc.c @@ -XXX,XX +XXX,XX @@ * 1) PLIC (Platform Level Interrupt Controller) * 2) eNVM (Embedded Non-Volatile Memory) * 3) MMUARTs (Multi-Mode UART) + * 4) Cadence eMMC/SDHC controller and an SD card connected to it * * This board currently generates devicetree dynamically that indicates at least * two harts and up to five harts. @@ -XXX,XX +XXX,XX @@ static const struct MemmapEntry { [MICROCHIP_PFSOC_MMUART0] = { 0x20000000, 0x1000 }, [MICROCHIP_PFSOC_SYSREG] = { 0x20002000, 0x2000 }, [MICROCHIP_PFSOC_MPUCFG] = { 0x20005000, 0x1000 }, + [MICROCHIP_PFSOC_EMMC_SD] = { 0x20008000, 0x1000 }, [MICROCHIP_PFSOC_MMUART1] = { 0x20100000, 0x1000 }, [MICROCHIP_PFSOC_MMUART2] = { 0x20102000, 0x1000 }, [MICROCHIP_PFSOC_MMUART3] = { 0x20104000, 0x1000 }, @@ -XXX,XX +XXX,XX @@ static void microchip_pfsoc_soc_instance_init(Object *obj) qdev_prop_set_string(DEVICE(&s->u_cpus), "cpu-type", TYPE_RISCV_CPU_SIFIVE_U54); qdev_prop_set_uint64(DEVICE(&s->u_cpus), "resetvec", RESET_VECTOR); + + object_initialize_child(obj, "sd-controller", &s->sdhci, + TYPE_CADENCE_SDHCI); } static void microchip_pfsoc_soc_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void microchip_pfsoc_soc_realize(DeviceState *dev, Error **errp) memmap[MICROCHIP_PFSOC_MPUCFG].base, memmap[MICROCHIP_PFSOC_MPUCFG].size); + /* SDHCI */ + sysbus_realize(SYS_BUS_DEVICE(&s->sdhci), errp); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->sdhci), 0, + memmap[MICROCHIP_PFSOC_EMMC_SD].base); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->sdhci), 0, + qdev_get_gpio_in(DEVICE(s->plic), MICROCHIP_PFSOC_EMMC_SD_IRQ)); + /* MMUARTs */ s->serial0 = mchp_pfsoc_mmuart_create(system_memory, memmap[MICROCHIP_PFSOC_MMUART0].base, @@ -XXX,XX +XXX,XX @@ static void microchip_icicle_kit_machine_init(MachineState *machine) MicrochipIcicleKitState *s = MICROCHIP_ICICLE_KIT_MACHINE(machine); MemoryRegion *system_memory = get_system_memory(); MemoryRegion *main_mem = g_new(MemoryRegion, 1); + DriveInfo *dinfo = drive_get_next(IF_SD); /* Sanity check on RAM size */ if (machine->ram_size < mc->default_ram_size) { @@ -XXX,XX +XXX,XX @@ static void microchip_icicle_kit_machine_init(MachineState *machine) /* Load the firmware */ riscv_find_and_load_firmware(machine, BIOS_FILENAME, RESET_VECTOR, NULL); + + /* Attach an SD card */ + if (dinfo) { + CadenceSDHCIState *sdhci = &(s->soc.sdhci); + DeviceState *card = qdev_new(TYPE_SD_CARD); + + qdev_prop_set_drive_err(card, "drive", blk_by_legacy_dinfo(dinfo), + &error_fatal); + qdev_realize_and_unref(card, sdhci->bus, &error_fatal); + } } static void microchip_icicle_kit_machine_class_init(ObjectClass *oc, void *data) diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/Kconfig +++ b/hw/riscv/Kconfig @@ -XXX,XX +XXX,XX @@ config MICROCHIP_PFSOC select SIFIVE select UNIMP select MCHP_PFSOC_MMUART + select CADENCE_SDHCI -- 2.28.0 From: Bin Meng <bin.meng@windriver.com> Microchip PolarFire SoC integrates a DMA engine that supports: * Independent concurrent DMA transfers using 4 DMA channels * Generation of interrupts on various conditions during execution which is actually an IP reused from the SiFive FU540 chip. This creates a model to support both polling and interrupt modes. Signed-off-by: Bin Meng <bin.meng@windriver.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-10-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/dma/sifive_pdma.h | 57 +++++++ hw/dma/sifive_pdma.c | 313 +++++++++++++++++++++++++++++++++++ hw/dma/Kconfig | 3 + hw/dma/meson.build | 1 + 4 files changed, 374 insertions(+) create mode 100644 include/hw/dma/sifive_pdma.h create mode 100644 hw/dma/sifive_pdma.c diff --git a/include/hw/dma/sifive_pdma.h b/include/hw/dma/sifive_pdma.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/dma/sifive_pdma.h @@ -XXX,XX +XXX,XX @@ +/* + * SiFive Platform DMA emulation + * + * Copyright (c) 2020 Wind River Systems, Inc. + * + * Author: + * Bin Meng <bin.meng@windriver.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 or + * (at your option) version 3 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef SIFIVE_PDMA_H +#define SIFIVE_PDMA_H + +struct sifive_pdma_chan { + uint32_t control; + uint32_t next_config; + uint64_t next_bytes; + uint64_t next_dst; + uint64_t next_src; + uint32_t exec_config; + uint64_t exec_bytes; + uint64_t exec_dst; + uint64_t exec_src; + int state; +}; + +#define SIFIVE_PDMA_CHANS 4 +#define SIFIVE_PDMA_IRQS (SIFIVE_PDMA_CHANS * 2) +#define SIFIVE_PDMA_REG_SIZE 0x100000 +#define SIFIVE_PDMA_CHAN_NO(reg) ((reg & (SIFIVE_PDMA_REG_SIZE - 1)) >> 12) + +typedef struct SiFivePDMAState { + SysBusDevice parent; + MemoryRegion iomem; + qemu_irq irq[SIFIVE_PDMA_IRQS]; + + struct sifive_pdma_chan chan[SIFIVE_PDMA_CHANS]; +} SiFivePDMAState; + +#define TYPE_SIFIVE_PDMA "sifive.pdma" + +#define SIFIVE_PDMA(obj) \ + OBJECT_CHECK(SiFivePDMAState, (obj), TYPE_SIFIVE_PDMA) + +#endif /* SIFIVE_PDMA_H */ diff --git a/hw/dma/sifive_pdma.c b/hw/dma/sifive_pdma.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/dma/sifive_pdma.c @@ -XXX,XX +XXX,XX @@ +/* + * SiFive Platform DMA emulation + * + * Copyright (c) 2020 Wind River Systems, Inc. + * + * Author: + * Bin Meng <bin.meng@windriver.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 or + * (at your option) version 3 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "qemu/bitops.h" +#include "qemu/log.h" +#include "qapi/error.h" +#include "hw/hw.h" +#include "hw/irq.h" +#include "hw/qdev-properties.h" +#include "hw/sysbus.h" +#include "migration/vmstate.h" +#include "sysemu/dma.h" +#include "hw/dma/sifive_pdma.h" + +#define DMA_CONTROL 0x000 +#define CONTROL_CLAIM BIT(0) +#define CONTROL_RUN BIT(1) +#define CONTROL_DONE_IE BIT(14) +#define CONTROL_ERR_IE BIT(15) +#define CONTROL_DONE BIT(30) +#define CONTROL_ERR BIT(31) + +#define DMA_NEXT_CONFIG 0x004 +#define CONFIG_REPEAT BIT(2) +#define CONFIG_ORDER BIT(3) +#define CONFIG_WRSZ_SHIFT 24 +#define CONFIG_RDSZ_SHIFT 28 +#define CONFIG_SZ_MASK 0xf + +#define DMA_NEXT_BYTES 0x008 +#define DMA_NEXT_DST 0x010 +#define DMA_NEXT_SRC 0x018 +#define DMA_EXEC_CONFIG 0x104 +#define DMA_EXEC_BYTES 0x108 +#define DMA_EXEC_DST 0x110 +#define DMA_EXEC_SRC 0x118 + +enum dma_chan_state { + DMA_CHAN_STATE_IDLE, + DMA_CHAN_STATE_STARTED, + DMA_CHAN_STATE_ERROR, + DMA_CHAN_STATE_DONE +}; + +static void sifive_pdma_run(SiFivePDMAState *s, int ch) +{ + uint64_t bytes = s->chan[ch].next_bytes; + uint64_t dst = s->chan[ch].next_dst; + uint64_t src = s->chan[ch].next_src; + uint32_t config = s->chan[ch].next_config; + int wsize, rsize, size; + uint8_t buf[64]; + int n; + + /* do nothing if bytes to transfer is zero */ + if (!bytes) { + goto error; + } + + /* + * The manual does not describe how the hardware behaviors when + * config.wsize and config.rsize are given different values. + * A common case is memory to memory DMA, and in this case they + * are normally the same. Abort if this expectation fails. + */ + wsize = (config >> CONFIG_WRSZ_SHIFT) & CONFIG_SZ_MASK; + rsize = (config >> CONFIG_RDSZ_SHIFT) & CONFIG_SZ_MASK; + if (wsize != rsize) { + goto error; + } + + /* + * Calculate the transaction size + * + * size field is base 2 logarithm of DMA transaction size, + * but there is an upper limit of 64 bytes per transaction. + */ + size = wsize; + if (size > 6) { + size = 6; + } + size = 1 << size; + + /* the bytes to transfer should be multiple of transaction size */ + if (bytes % size) { + goto error; + } + + /* indicate a DMA transfer is started */ + s->chan[ch].state = DMA_CHAN_STATE_STARTED; + s->chan[ch].control &= ~CONTROL_DONE; + s->chan[ch].control &= ~CONTROL_ERR; + + /* load the next_ registers into their exec_ counterparts */ + s->chan[ch].exec_config = config; + s->chan[ch].exec_bytes = bytes; + s->chan[ch].exec_dst = dst; + s->chan[ch].exec_src = src; + + for (n = 0; n < bytes / size; n++) { + cpu_physical_memory_read(s->chan[ch].exec_src, buf, size); + cpu_physical_memory_write(s->chan[ch].exec_dst, buf, size); + s->chan[ch].exec_src += size; + s->chan[ch].exec_dst += size; + s->chan[ch].exec_bytes -= size; + } + + /* indicate a DMA transfer is done */ + s->chan[ch].state = DMA_CHAN_STATE_DONE; + s->chan[ch].control &= ~CONTROL_RUN; + s->chan[ch].control |= CONTROL_DONE; + + /* reload exec_ registers if repeat is required */ + if (s->chan[ch].next_config & CONFIG_REPEAT) { + s->chan[ch].exec_bytes = bytes; + s->chan[ch].exec_dst = dst; + s->chan[ch].exec_src = src; + } + + return; + +error: + s->chan[ch].state = DMA_CHAN_STATE_ERROR; + s->chan[ch].control |= CONTROL_ERR; + return; +} + +static inline void sifive_pdma_update_irq(SiFivePDMAState *s, int ch) +{ + bool done_ie, err_ie; + + done_ie = !!(s->chan[ch].control & CONTROL_DONE_IE); + err_ie = !!(s->chan[ch].control & CONTROL_ERR_IE); + + if (done_ie && (s->chan[ch].control & CONTROL_DONE)) { + qemu_irq_raise(s->irq[ch * 2]); + } else { + qemu_irq_lower(s->irq[ch * 2]); + } + + if (err_ie && (s->chan[ch].control & CONTROL_ERR)) { + qemu_irq_raise(s->irq[ch * 2 + 1]); + } else { + qemu_irq_lower(s->irq[ch * 2 + 1]); + } + + s->chan[ch].state = DMA_CHAN_STATE_IDLE; +} + +static uint64_t sifive_pdma_read(void *opaque, hwaddr offset, unsigned size) +{ + SiFivePDMAState *s = opaque; + int ch = SIFIVE_PDMA_CHAN_NO(offset); + uint64_t val = 0; + + if (ch >= SIFIVE_PDMA_CHANS) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: Invalid channel no %d\n", + __func__, ch); + return 0; + } + + offset &= 0xfff; + switch (offset) { + case DMA_CONTROL: + val = s->chan[ch].control; + break; + case DMA_NEXT_CONFIG: + val = s->chan[ch].next_config; + break; + case DMA_NEXT_BYTES: + val = s->chan[ch].next_bytes; + break; + case DMA_NEXT_DST: + val = s->chan[ch].next_dst; + break; + case DMA_NEXT_SRC: + val = s->chan[ch].next_src; + break; + case DMA_EXEC_CONFIG: + val = s->chan[ch].exec_config; + break; + case DMA_EXEC_BYTES: + val = s->chan[ch].exec_bytes; + break; + case DMA_EXEC_DST: + val = s->chan[ch].exec_dst; + break; + case DMA_EXEC_SRC: + val = s->chan[ch].exec_src; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIX "\n", + __func__, offset); + break; + } + + return val; +} + +static void sifive_pdma_write(void *opaque, hwaddr offset, + uint64_t value, unsigned size) +{ + SiFivePDMAState *s = opaque; + int ch = SIFIVE_PDMA_CHAN_NO(offset); + + if (ch >= SIFIVE_PDMA_CHANS) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: Invalid channel no %d\n", + __func__, ch); + return; + } + + offset &= 0xfff; + switch (offset) { + case DMA_CONTROL: + s->chan[ch].control = value; + + if (value & CONTROL_RUN) { + sifive_pdma_run(s, ch); + } + + sifive_pdma_update_irq(s, ch); + break; + case DMA_NEXT_CONFIG: + s->chan[ch].next_config = value; + break; + case DMA_NEXT_BYTES: + s->chan[ch].next_bytes = value; + break; + case DMA_NEXT_DST: + s->chan[ch].next_dst = value; + break; + case DMA_NEXT_SRC: + s->chan[ch].next_src = value; + break; + case DMA_EXEC_CONFIG: + case DMA_EXEC_BYTES: + case DMA_EXEC_DST: + case DMA_EXEC_SRC: + /* these are read-only registers */ + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIX "\n", + __func__, offset); + break; + } +} + +static const MemoryRegionOps sifive_pdma_ops = { + .read = sifive_pdma_read, + .write = sifive_pdma_write, + .endianness = DEVICE_LITTLE_ENDIAN, + /* there are 32-bit and 64-bit wide registers */ + .impl = { + .min_access_size = 4, + .max_access_size = 8, + } +}; + +static void sifive_pdma_realize(DeviceState *dev, Error **errp) +{ + SiFivePDMAState *s = SIFIVE_PDMA(dev); + int i; + + memory_region_init_io(&s->iomem, OBJECT(dev), &sifive_pdma_ops, s, + TYPE_SIFIVE_PDMA, SIFIVE_PDMA_REG_SIZE); + sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->iomem); + + for (i = 0; i < SIFIVE_PDMA_IRQS; i++) { + sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq[i]); + } +} + +static void sifive_pdma_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->desc = "SiFive Platform DMA controller"; + dc->realize = sifive_pdma_realize; +} + +static const TypeInfo sifive_pdma_info = { + .name = TYPE_SIFIVE_PDMA, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(SiFivePDMAState), + .class_init = sifive_pdma_class_init, +}; + +static void sifive_pdma_register_types(void) +{ + type_register_static(&sifive_pdma_info); +} + +type_init(sifive_pdma_register_types) diff --git a/hw/dma/Kconfig b/hw/dma/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/dma/Kconfig +++ b/hw/dma/Kconfig @@ -XXX,XX +XXX,XX @@ config ZYNQ_DEVCFG config STP2000 bool + +config SIFIVE_PDMA + bool diff --git a/hw/dma/meson.build b/hw/dma/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/dma/meson.build +++ b/hw/dma/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_XLNX_ZYNQMP_ARM', if_true: files('xlnx-zdma.c')) softmmu_ss.add(when: 'CONFIG_OMAP', if_true: files('omap_dma.c', 'soc_dma.c')) softmmu_ss.add(when: 'CONFIG_PXA2XX', if_true: files('pxa2xx_dma.c')) softmmu_ss.add(when: 'CONFIG_RASPI', if_true: files('bcm2835_dma.c')) +softmmu_ss.add(when: 'CONFIG_SIFIVE_PDMA', if_true: files('sifive_pdma.c')) -- 2.28.0 From: Bin Meng <bin.meng@windriver.com> On the Icicle Kit board, the HSS firmware utilizes the on-chip DMA controller to move the 2nd stage bootloader in the system memory. Let's connect a DMA controller to Microchip PolarFire SoC. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-11-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/riscv/microchip_pfsoc.h | 11 +++++++++++ hw/riscv/microchip_pfsoc.c | 15 +++++++++++++++ hw/riscv/Kconfig | 1 + 3 files changed, 27 insertions(+) diff --git a/include/hw/riscv/microchip_pfsoc.h b/include/hw/riscv/microchip_pfsoc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/riscv/microchip_pfsoc.h +++ b/include/hw/riscv/microchip_pfsoc.h @@ -XXX,XX +XXX,XX @@ #define HW_MICROCHIP_PFSOC_H #include "hw/char/mchp_pfsoc_mmuart.h" +#include "hw/dma/sifive_pdma.h" #include "hw/sd/cadence_sdhci.h" typedef struct MicrochipPFSoCState { @@ -XXX,XX +XXX,XX @@ typedef struct MicrochipPFSoCState { MchpPfSoCMMUartState *serial2; MchpPfSoCMMUartState *serial3; MchpPfSoCMMUartState *serial4; + SiFivePDMAState dma; CadenceSDHCIState sdhci; } MicrochipPFSoCState; @@ -XXX,XX +XXX,XX @@ enum { MICROCHIP_PFSOC_BUSERR_UNIT4, MICROCHIP_PFSOC_CLINT, MICROCHIP_PFSOC_L2CC, + MICROCHIP_PFSOC_DMA, MICROCHIP_PFSOC_L2LIM, MICROCHIP_PFSOC_PLIC, MICROCHIP_PFSOC_MMUART0, @@ -XXX,XX +XXX,XX @@ enum { }; enum { + MICROCHIP_PFSOC_DMA_IRQ0 = 5, + MICROCHIP_PFSOC_DMA_IRQ1 = 6, + MICROCHIP_PFSOC_DMA_IRQ2 = 7, + MICROCHIP_PFSOC_DMA_IRQ3 = 8, + MICROCHIP_PFSOC_DMA_IRQ4 = 9, + MICROCHIP_PFSOC_DMA_IRQ5 = 10, + MICROCHIP_PFSOC_DMA_IRQ6 = 11, + MICROCHIP_PFSOC_DMA_IRQ7 = 12, MICROCHIP_PFSOC_EMMC_SD_IRQ = 88, MICROCHIP_PFSOC_MMUART0_IRQ = 90, MICROCHIP_PFSOC_MMUART1_IRQ = 91, diff --git a/hw/riscv/microchip_pfsoc.c b/hw/riscv/microchip_pfsoc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/microchip_pfsoc.c +++ b/hw/riscv/microchip_pfsoc.c @@ -XXX,XX +XXX,XX @@ * 2) eNVM (Embedded Non-Volatile Memory) * 3) MMUARTs (Multi-Mode UART) * 4) Cadence eMMC/SDHC controller and an SD card connected to it + * 5) SiFive Platform DMA (Direct Memory Access Controller) * * This board currently generates devicetree dynamically that indicates at least * two harts and up to five harts. @@ -XXX,XX +XXX,XX @@ static const struct MemmapEntry { [MICROCHIP_PFSOC_BUSERR_UNIT4] = { 0x1704000, 0x1000 }, [MICROCHIP_PFSOC_CLINT] = { 0x2000000, 0x10000 }, [MICROCHIP_PFSOC_L2CC] = { 0x2010000, 0x1000 }, + [MICROCHIP_PFSOC_DMA] = { 0x3000000, 0x100000 }, [MICROCHIP_PFSOC_L2LIM] = { 0x8000000, 0x2000000 }, [MICROCHIP_PFSOC_PLIC] = { 0xc000000, 0x4000000 }, [MICROCHIP_PFSOC_MMUART0] = { 0x20000000, 0x1000 }, @@ -XXX,XX +XXX,XX @@ static void microchip_pfsoc_soc_instance_init(Object *obj) TYPE_RISCV_CPU_SIFIVE_U54); qdev_prop_set_uint64(DEVICE(&s->u_cpus), "resetvec", RESET_VECTOR); + object_initialize_child(obj, "dma-controller", &s->dma, + TYPE_SIFIVE_PDMA); + object_initialize_child(obj, "sd-controller", &s->sdhci, TYPE_CADENCE_SDHCI); } @@ -XXX,XX +XXX,XX @@ static void microchip_pfsoc_soc_realize(DeviceState *dev, Error **errp) memmap[MICROCHIP_PFSOC_PLIC].size); g_free(plic_hart_config); + /* DMA */ + sysbus_realize(SYS_BUS_DEVICE(&s->dma), errp); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->dma), 0, + memmap[MICROCHIP_PFSOC_DMA].base); + for (i = 0; i < SIFIVE_PDMA_IRQS; i++) { + sysbus_connect_irq(SYS_BUS_DEVICE(&s->dma), i, + qdev_get_gpio_in(DEVICE(s->plic), + MICROCHIP_PFSOC_DMA_IRQ0 + i)); + } + /* SYSREG */ create_unimplemented_device("microchip.pfsoc.sysreg", memmap[MICROCHIP_PFSOC_SYSREG].base, diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/Kconfig +++ b/hw/riscv/Kconfig @@ -XXX,XX +XXX,XX @@ config MICROCHIP_PFSOC select SIFIVE select UNIMP select MCHP_PFSOC_MMUART + select SIFIVE_PDMA select CADENCE_SDHCI -- 2.28.0 From: Bin Meng <bin.meng@windriver.com> At present the PHY address of the PHY connected to GEM is hard-coded to either 23 (BOARD_PHY_ADDRESS) or 0. This might not be the case for all boards. Add a new 'phy-addr' property so that board can specify the PHY address for each GEM instance. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-12-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/net/cadence_gem.h | 2 ++ hw/net/cadence_gem.c | 5 +++-- 2 files changed, 5 insertions(+), 2 deletions(-) diff --git a/include/hw/net/cadence_gem.h b/include/hw/net/cadence_gem.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/cadence_gem.h +++ b/include/hw/net/cadence_gem.h @@ -XXX,XX +XXX,XX @@ typedef struct CadenceGEMState { /* Mask of register bits which are write 1 to clear */ uint32_t regs_w1c[CADENCE_GEM_MAXREG]; + /* PHY address */ + uint8_t phy_addr; /* PHY registers backing store */ uint16_t phy_regs[32]; diff --git a/hw/net/cadence_gem.c b/hw/net/cadence_gem.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/cadence_gem.c +++ b/hw/net/cadence_gem.c @@ -XXX,XX +XXX,XX @@ static uint64_t gem_read(void *opaque, hwaddr offset, unsigned size) uint32_t phy_addr, reg_num; phy_addr = (retval & GEM_PHYMNTNC_ADDR) >> GEM_PHYMNTNC_ADDR_SHFT; - if (phy_addr == BOARD_PHY_ADDRESS || phy_addr == 0) { + if (phy_addr == s->phy_addr || phy_addr == 0) { reg_num = (retval & GEM_PHYMNTNC_REG) >> GEM_PHYMNTNC_REG_SHIFT; retval &= 0xFFFF0000; retval |= gem_phy_read(s, reg_num); @@ -XXX,XX +XXX,XX @@ static void gem_write(void *opaque, hwaddr offset, uint64_t val, uint32_t phy_addr, reg_num; phy_addr = (val & GEM_PHYMNTNC_ADDR) >> GEM_PHYMNTNC_ADDR_SHFT; - if (phy_addr == BOARD_PHY_ADDRESS || phy_addr == 0) { + if (phy_addr == s->phy_addr || phy_addr == 0) { reg_num = (val & GEM_PHYMNTNC_REG) >> GEM_PHYMNTNC_REG_SHIFT; gem_phy_write(s, reg_num, val); } @@ -XXX,XX +XXX,XX @@ static Property gem_properties[] = { DEFINE_NIC_PROPERTIES(CadenceGEMState, conf), DEFINE_PROP_UINT32("revision", CadenceGEMState, revision, GEM_MODID_VALUE), + DEFINE_PROP_UINT8("phy-addr", CadenceGEMState, phy_addr, BOARD_PHY_ADDRESS), DEFINE_PROP_UINT8("num-priority-queues", CadenceGEMState, num_priority_queues, 1), DEFINE_PROP_UINT8("num-type1-screeners", CadenceGEMState, -- 2.28.0 From: Bin Meng <bin.meng@windriver.com> When cadence_gem model was created for Xilinx boards, the PHY address was hard-coded to 23 in the GEM model. Now that we have introduced a property we can use that to tell GEM model what our PHY address is. Change all boards' GEM 'phy-addr' property value to 23, and set the PHY address default value to 0 in the GEM model. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-13-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/arm/xilinx_zynq.c | 1 + hw/arm/xlnx-versal.c | 1 + hw/arm/xlnx-zynqmp.c | 2 ++ hw/net/cadence_gem.c | 6 +++--- 4 files changed, 7 insertions(+), 3 deletions(-) diff --git a/hw/arm/xilinx_zynq.c b/hw/arm/xilinx_zynq.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xilinx_zynq.c +++ b/hw/arm/xilinx_zynq.c @@ -XXX,XX +XXX,XX @@ static void gem_init(NICInfo *nd, uint32_t base, qemu_irq irq) qemu_check_nic_model(nd, TYPE_CADENCE_GEM); qdev_set_nic_properties(dev, nd); } + object_property_set_int(OBJECT(dev), "phy-addr", 23, &error_abort); s = SYS_BUS_DEVICE(dev); sysbus_realize_and_unref(s, &error_fatal); sysbus_mmio_map(s, 0, base); diff --git a/hw/arm/xlnx-versal.c b/hw/arm/xlnx-versal.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-versal.c +++ b/hw/arm/xlnx-versal.c @@ -XXX,XX +XXX,XX @@ static void versal_create_gems(Versal *s, qemu_irq *pic) qemu_check_nic_model(nd, "cadence_gem"); qdev_set_nic_properties(dev, nd); } + object_property_set_int(OBJECT(dev), "phy-addr", 23, &error_abort); object_property_set_int(OBJECT(dev), "num-priority-queues", 2, &error_abort); object_property_set_link(OBJECT(dev), "dma", OBJECT(&s->mr_ps), diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-zynqmp.c +++ b/hw/arm/xlnx-zynqmp.c @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp) } object_property_set_int(OBJECT(&s->gem[i]), "revision", GEM_REVISION, &error_abort); + object_property_set_int(OBJECT(&s->gem[i]), "phy-addr", 23, + &error_abort); object_property_set_int(OBJECT(&s->gem[i]), "num-priority-queues", 2, &error_abort); if (!sysbus_realize(SYS_BUS_DEVICE(&s->gem[i]), errp)) { diff --git a/hw/net/cadence_gem.c b/hw/net/cadence_gem.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/cadence_gem.c +++ b/hw/net/cadence_gem.c @@ -XXX,XX +XXX,XX @@ #define GEM_PHYMNTNC_REG_SHIFT 18 /* Marvell PHY definitions */ -#define BOARD_PHY_ADDRESS 23 /* PHY address we will emulate a device at */ +#define BOARD_PHY_ADDRESS 0 /* PHY address we will emulate a device at */ #define PHY_REG_CONTROL 0 #define PHY_REG_STATUS 1 @@ -XXX,XX +XXX,XX @@ static uint64_t gem_read(void *opaque, hwaddr offset, unsigned size) uint32_t phy_addr, reg_num; phy_addr = (retval & GEM_PHYMNTNC_ADDR) >> GEM_PHYMNTNC_ADDR_SHFT; - if (phy_addr == s->phy_addr || phy_addr == 0) { + if (phy_addr == s->phy_addr) { reg_num = (retval & GEM_PHYMNTNC_REG) >> GEM_PHYMNTNC_REG_SHIFT; retval &= 0xFFFF0000; retval |= gem_phy_read(s, reg_num); @@ -XXX,XX +XXX,XX @@ static void gem_write(void *opaque, hwaddr offset, uint64_t val, uint32_t phy_addr, reg_num; phy_addr = (val & GEM_PHYMNTNC_ADDR) >> GEM_PHYMNTNC_ADDR_SHFT; - if (phy_addr == s->phy_addr || phy_addr == 0) { + if (phy_addr == s->phy_addr) { reg_num = (val & GEM_PHYMNTNC_REG) >> GEM_PHYMNTNC_REG_SHIFT; gem_phy_write(s, reg_num, val); } -- 2.28.0 From: Bin Meng <bin.meng@windriver.com> Microchip PolarFire SoC integrates 2 Candence GEMs to provide IEEE 802.3 standard-compliant 10/100/1000 Mbps ethernet interface. On the Icicle Kit board, GEM0 connects to a PHY at address 8 while GEM1 connects to a PHY at address 9. The 2nd stage bootloader (U-Boot) is using GEM1 by default, so we must specify 2 '-nic' options from the command line in order to get a working ethernet. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1598924352-89526-14-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/riscv/microchip_pfsoc.h | 7 ++++++ hw/riscv/microchip_pfsoc.c | 39 ++++++++++++++++++++++++++++++ 2 files changed, 46 insertions(+) diff --git a/include/hw/riscv/microchip_pfsoc.h b/include/hw/riscv/microchip_pfsoc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/riscv/microchip_pfsoc.h +++ b/include/hw/riscv/microchip_pfsoc.h @@ -XXX,XX +XXX,XX @@ #include "hw/char/mchp_pfsoc_mmuart.h" #include "hw/dma/sifive_pdma.h" +#include "hw/net/cadence_gem.h" #include "hw/sd/cadence_sdhci.h" typedef struct MicrochipPFSoCState { @@ -XXX,XX +XXX,XX @@ typedef struct MicrochipPFSoCState { MchpPfSoCMMUartState *serial3; MchpPfSoCMMUartState *serial4; SiFivePDMAState dma; + CadenceGEMState gem0; + CadenceGEMState gem1; CadenceSDHCIState sdhci; } MicrochipPFSoCState; @@ -XXX,XX +XXX,XX @@ enum { MICROCHIP_PFSOC_MMUART2, MICROCHIP_PFSOC_MMUART3, MICROCHIP_PFSOC_MMUART4, + MICROCHIP_PFSOC_GEM0, + MICROCHIP_PFSOC_GEM1, MICROCHIP_PFSOC_ENVM_CFG, MICROCHIP_PFSOC_ENVM_DATA, MICROCHIP_PFSOC_IOSCB_CFG, @@ -XXX,XX +XXX,XX @@ enum { MICROCHIP_PFSOC_DMA_IRQ5 = 10, MICROCHIP_PFSOC_DMA_IRQ6 = 11, MICROCHIP_PFSOC_DMA_IRQ7 = 12, + MICROCHIP_PFSOC_GEM0_IRQ = 64, + MICROCHIP_PFSOC_GEM1_IRQ = 70, MICROCHIP_PFSOC_EMMC_SD_IRQ = 88, MICROCHIP_PFSOC_MMUART0_IRQ = 90, MICROCHIP_PFSOC_MMUART1_IRQ = 91, diff --git a/hw/riscv/microchip_pfsoc.c b/hw/riscv/microchip_pfsoc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/microchip_pfsoc.c +++ b/hw/riscv/microchip_pfsoc.c @@ -XXX,XX +XXX,XX @@ * 3) MMUARTs (Multi-Mode UART) * 4) Cadence eMMC/SDHC controller and an SD card connected to it * 5) SiFive Platform DMA (Direct Memory Access Controller) + * 6) GEM (Gigabit Ethernet MAC Controller) * * This board currently generates devicetree dynamically that indicates at least * two harts and up to five harts. @@ -XXX,XX +XXX,XX @@ #define BIOS_FILENAME "hss.bin" #define RESET_VECTOR 0x20220000 +/* GEM version */ +#define GEM_REVISION 0x0107010c + static const struct MemmapEntry { hwaddr base; hwaddr size; @@ -XXX,XX +XXX,XX @@ static const struct MemmapEntry { [MICROCHIP_PFSOC_MMUART2] = { 0x20102000, 0x1000 }, [MICROCHIP_PFSOC_MMUART3] = { 0x20104000, 0x1000 }, [MICROCHIP_PFSOC_MMUART4] = { 0x20106000, 0x1000 }, + [MICROCHIP_PFSOC_GEM0] = { 0x20110000, 0x2000 }, + [MICROCHIP_PFSOC_GEM1] = { 0x20112000, 0x2000 }, [MICROCHIP_PFSOC_ENVM_CFG] = { 0x20200000, 0x1000 }, [MICROCHIP_PFSOC_ENVM_DATA] = { 0x20220000, 0x20000 }, [MICROCHIP_PFSOC_IOSCB_CFG] = { 0x37080000, 0x1000 }, @@ -XXX,XX +XXX,XX @@ static void microchip_pfsoc_soc_instance_init(Object *obj) object_initialize_child(obj, "dma-controller", &s->dma, TYPE_SIFIVE_PDMA); + object_initialize_child(obj, "gem0", &s->gem0, TYPE_CADENCE_GEM); + object_initialize_child(obj, "gem1", &s->gem1, TYPE_CADENCE_GEM); + object_initialize_child(obj, "sd-controller", &s->sdhci, TYPE_CADENCE_SDHCI); } @@ -XXX,XX +XXX,XX @@ static void microchip_pfsoc_soc_realize(DeviceState *dev, Error **errp) MemoryRegion *envm_data = g_new(MemoryRegion, 1); char *plic_hart_config; size_t plic_hart_config_len; + NICInfo *nd; int i; sysbus_realize(SYS_BUS_DEVICE(&s->e_cpus), &error_abort); @@ -XXX,XX +XXX,XX @@ static void microchip_pfsoc_soc_realize(DeviceState *dev, Error **errp) qdev_get_gpio_in(DEVICE(s->plic), MICROCHIP_PFSOC_MMUART4_IRQ), serial_hd(4)); + /* GEMs */ + + nd = &nd_table[0]; + if (nd->used) { + qemu_check_nic_model(nd, TYPE_CADENCE_GEM); + qdev_set_nic_properties(DEVICE(&s->gem0), nd); + } + nd = &nd_table[1]; + if (nd->used) { + qemu_check_nic_model(nd, TYPE_CADENCE_GEM); + qdev_set_nic_properties(DEVICE(&s->gem1), nd); + } + + object_property_set_int(OBJECT(&s->gem0), "revision", GEM_REVISION, errp); + object_property_set_int(OBJECT(&s->gem0), "phy-addr", 8, errp); + sysbus_realize(SYS_BUS_DEVICE(&s->gem0), errp); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gem0), 0, + memmap[MICROCHIP_PFSOC_GEM0].base); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gem0), 0, + qdev_get_gpio_in(DEVICE(s->plic), MICROCHIP_PFSOC_GEM0_IRQ)); + + object_property_set_int(OBJECT(&s->gem1), "revision", GEM_REVISION, errp); + object_property_set_int(OBJECT(&s->gem1), "phy-addr", 9, errp); + sysbus_realize(SYS_BUS_DEVICE(&s->gem1), errp); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gem1), 0, + memmap[MICROCHIP_PFSOC_GEM1].base); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gem1), 0, + qdev_get_gpio_in(DEVICE(s->plic), MICROCHIP_PFSOC_GEM1_IRQ)); + /* eNVM */ memory_region_init_rom(envm_data, OBJECT(dev), "microchip.pfsoc.envm.data", memmap[MICROCHIP_PFSOC_ENVM_DATA].size, -- 2.28.0 From: Bin Meng <bin.meng@windriver.com> Microchip PolarFire SoC integrates 3 GPIOs controllers. It seems enough to create unimplemented devices to cover their register spaces at this point. With this commit, QEMU can boot to U-Boot (2nd stage bootloader) all the way to the Linux shell login prompt, with a modified HSS (1st stage bootloader). For detailed instructions on how to create images for the Icicle Kit board, please check QEMU RISC-V WiKi page at: https://wiki.qemu.org/Documentation/Platforms/RISCV Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1598924352-89526-15-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/riscv/microchip_pfsoc.h | 3 +++ hw/riscv/microchip_pfsoc.c | 14 ++++++++++++++ 2 files changed, 17 insertions(+) diff --git a/include/hw/riscv/microchip_pfsoc.h b/include/hw/riscv/microchip_pfsoc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/riscv/microchip_pfsoc.h +++ b/include/hw/riscv/microchip_pfsoc.h @@ -XXX,XX +XXX,XX @@ enum { MICROCHIP_PFSOC_MMUART4, MICROCHIP_PFSOC_GEM0, MICROCHIP_PFSOC_GEM1, + MICROCHIP_PFSOC_GPIO0, + MICROCHIP_PFSOC_GPIO1, + MICROCHIP_PFSOC_GPIO2, MICROCHIP_PFSOC_ENVM_CFG, MICROCHIP_PFSOC_ENVM_DATA, MICROCHIP_PFSOC_IOSCB_CFG, diff --git a/hw/riscv/microchip_pfsoc.c b/hw/riscv/microchip_pfsoc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/microchip_pfsoc.c +++ b/hw/riscv/microchip_pfsoc.c @@ -XXX,XX +XXX,XX @@ static const struct MemmapEntry { [MICROCHIP_PFSOC_MMUART4] = { 0x20106000, 0x1000 }, [MICROCHIP_PFSOC_GEM0] = { 0x20110000, 0x2000 }, [MICROCHIP_PFSOC_GEM1] = { 0x20112000, 0x2000 }, + [MICROCHIP_PFSOC_GPIO0] = { 0x20120000, 0x1000 }, + [MICROCHIP_PFSOC_GPIO1] = { 0x20121000, 0x1000 }, + [MICROCHIP_PFSOC_GPIO2] = { 0x20122000, 0x1000 }, [MICROCHIP_PFSOC_ENVM_CFG] = { 0x20200000, 0x1000 }, [MICROCHIP_PFSOC_ENVM_DATA] = { 0x20220000, 0x20000 }, [MICROCHIP_PFSOC_IOSCB_CFG] = { 0x37080000, 0x1000 }, @@ -XXX,XX +XXX,XX @@ static void microchip_pfsoc_soc_realize(DeviceState *dev, Error **errp) sysbus_connect_irq(SYS_BUS_DEVICE(&s->gem1), 0, qdev_get_gpio_in(DEVICE(s->plic), MICROCHIP_PFSOC_GEM1_IRQ)); + /* GPIOs */ + create_unimplemented_device("microchip.pfsoc.gpio0", + memmap[MICROCHIP_PFSOC_GPIO0].base, + memmap[MICROCHIP_PFSOC_GPIO0].size); + create_unimplemented_device("microchip.pfsoc.gpio1", + memmap[MICROCHIP_PFSOC_GPIO1].base, + memmap[MICROCHIP_PFSOC_GPIO1].size); + create_unimplemented_device("microchip.pfsoc.gpio2", + memmap[MICROCHIP_PFSOC_GPIO2].base, + memmap[MICROCHIP_PFSOC_GPIO2].size); + /* eNVM */ memory_region_init_rom(envm_data, OBJECT(dev), "microchip.pfsoc.envm.data", memmap[MICROCHIP_PFSOC_ENVM_DATA].size, -- 2.28.0 From: Bin Meng <bin.meng@windriver.com> At present the CLINT timestamp is using a hard-coded timebase frequency value SIFIVE_CLINT_TIMEBASE_FREQ. This might not be true for all boards. Add a new 'timebase-freq' property to the CLINT device, and update various functions to accept this as a parameter. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-16-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/riscv/sifive_clint.h | 4 +++- target/riscv/cpu.h | 6 ++++-- hw/riscv/microchip_pfsoc.c | 6 +++++- hw/riscv/sifive_clint.c | 26 +++++++++++++++----------- hw/riscv/sifive_e.c | 3 ++- hw/riscv/sifive_u.c | 3 ++- hw/riscv/spike.c | 3 ++- hw/riscv/virt.c | 3 ++- target/riscv/cpu_helper.c | 4 +++- target/riscv/csr.c | 4 ++-- 10 files changed, 40 insertions(+), 22 deletions(-) diff --git a/include/hw/riscv/sifive_clint.h b/include/hw/riscv/sifive_clint.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/riscv/sifive_clint.h +++ b/include/hw/riscv/sifive_clint.h @@ -XXX,XX +XXX,XX @@ typedef struct SiFiveCLINTState { uint32_t timecmp_base; uint32_t time_base; uint32_t aperture_size; + uint32_t timebase_freq; } SiFiveCLINTState; DeviceState *sifive_clint_create(hwaddr addr, hwaddr size, uint32_t hartid_base, uint32_t num_harts, uint32_t sip_base, - uint32_t timecmp_base, uint32_t time_base, bool provide_rdtime); + uint32_t timecmp_base, uint32_t time_base, uint32_t timebase_freq, + bool provide_rdtime); enum { SIFIVE_SIP_BASE = 0x0, diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ struct CPURISCVState { pmp_table_t pmp_state; /* machine specific rdtime callback */ - uint64_t (*rdtime_fn)(void); + uint64_t (*rdtime_fn)(uint32_t); + uint32_t rdtime_fn_arg; /* True if in debugger mode. */ bool debugger; @@ -XXX,XX +XXX,XX @@ void riscv_cpu_swap_hypervisor_regs(CPURISCVState *env); int riscv_cpu_claim_interrupts(RISCVCPU *cpu, uint32_t interrupts); uint32_t riscv_cpu_update_mip(RISCVCPU *cpu, uint32_t mask, uint32_t value); #define BOOL_TO_MASK(x) (-!!(x)) /* helper for riscv_cpu_update_mip value */ -void riscv_cpu_set_rdtime_fn(CPURISCVState *env, uint64_t (*fn)(void)); +void riscv_cpu_set_rdtime_fn(CPURISCVState *env, uint64_t (*fn)(uint32_t), + uint32_t arg); #endif void riscv_cpu_set_mode(CPURISCVState *env, target_ulong newpriv); diff --git a/hw/riscv/microchip_pfsoc.c b/hw/riscv/microchip_pfsoc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/microchip_pfsoc.c +++ b/hw/riscv/microchip_pfsoc.c @@ -XXX,XX +XXX,XX @@ #define BIOS_FILENAME "hss.bin" #define RESET_VECTOR 0x20220000 +/* CLINT timebase frequency */ +#define CLINT_TIMEBASE_FREQ 1000000 + /* GEM version */ #define GEM_REVISION 0x0107010c @@ -XXX,XX +XXX,XX @@ static void microchip_pfsoc_soc_realize(DeviceState *dev, Error **errp) /* CLINT */ sifive_clint_create(memmap[MICROCHIP_PFSOC_CLINT].base, memmap[MICROCHIP_PFSOC_CLINT].size, 0, ms->smp.cpus, - SIFIVE_SIP_BASE, SIFIVE_TIMECMP_BASE, SIFIVE_TIME_BASE, false); + SIFIVE_SIP_BASE, SIFIVE_TIMECMP_BASE, SIFIVE_TIME_BASE, + CLINT_TIMEBASE_FREQ, false); /* L2 cache controller */ create_unimplemented_device("microchip.pfsoc.l2cc", diff --git a/hw/riscv/sifive_clint.c b/hw/riscv/sifive_clint.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/sifive_clint.c +++ b/hw/riscv/sifive_clint.c @@ -XXX,XX +XXX,XX @@ #include "hw/riscv/sifive_clint.h" #include "qemu/timer.h" -static uint64_t cpu_riscv_read_rtc(void) +static uint64_t cpu_riscv_read_rtc(uint32_t timebase_freq) { return muldiv64(qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL), - SIFIVE_CLINT_TIMEBASE_FREQ, NANOSECONDS_PER_SECOND); + timebase_freq, NANOSECONDS_PER_SECOND); } /* * Called when timecmp is written to update the QEMU timer or immediately * trigger timer interrupt if mtimecmp <= current timer value. */ -static void sifive_clint_write_timecmp(RISCVCPU *cpu, uint64_t value) +static void sifive_clint_write_timecmp(RISCVCPU *cpu, uint64_t value, + uint32_t timebase_freq) { uint64_t next; uint64_t diff; - uint64_t rtc_r = cpu_riscv_read_rtc(); + uint64_t rtc_r = cpu_riscv_read_rtc(timebase_freq); cpu->env.timecmp = value; if (cpu->env.timecmp <= rtc_r) { @@ -XXX,XX +XXX,XX @@ static void sifive_clint_write_timecmp(RISCVCPU *cpu, uint64_t value) diff = cpu->env.timecmp - rtc_r; /* back to ns (note args switched in muldiv64) */ next = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + - muldiv64(diff, NANOSECONDS_PER_SECOND, SIFIVE_CLINT_TIMEBASE_FREQ); + muldiv64(diff, NANOSECONDS_PER_SECOND, timebase_freq); timer_mod(cpu->env.timer, next); } @@ -XXX,XX +XXX,XX @@ static uint64_t sifive_clint_read(void *opaque, hwaddr addr, unsigned size) } } else if (addr == clint->time_base) { /* time_lo */ - return cpu_riscv_read_rtc() & 0xFFFFFFFF; + return cpu_riscv_read_rtc(clint->timebase_freq) & 0xFFFFFFFF; } else if (addr == clint->time_base + 4) { /* time_hi */ - return (cpu_riscv_read_rtc() >> 32) & 0xFFFFFFFF; + return (cpu_riscv_read_rtc(clint->timebase_freq) >> 32) & 0xFFFFFFFF; } error_report("clint: invalid read: %08x", (uint32_t)addr); @@ -XXX,XX +XXX,XX @@ static void sifive_clint_write(void *opaque, hwaddr addr, uint64_t value, /* timecmp_lo */ uint64_t timecmp_hi = env->timecmp >> 32; sifive_clint_write_timecmp(RISCV_CPU(cpu), - timecmp_hi << 32 | (value & 0xFFFFFFFF)); + timecmp_hi << 32 | (value & 0xFFFFFFFF), clint->timebase_freq); return; } else if ((addr & 0x7) == 4) { /* timecmp_hi */ uint64_t timecmp_lo = env->timecmp; sifive_clint_write_timecmp(RISCV_CPU(cpu), - value << 32 | (timecmp_lo & 0xFFFFFFFF)); + value << 32 | (timecmp_lo & 0xFFFFFFFF), clint->timebase_freq); } else { error_report("clint: invalid timecmp write: %08x", (uint32_t)addr); } @@ -XXX,XX +XXX,XX @@ static Property sifive_clint_properties[] = { DEFINE_PROP_UINT32("timecmp-base", SiFiveCLINTState, timecmp_base, 0), DEFINE_PROP_UINT32("time-base", SiFiveCLINTState, time_base, 0), DEFINE_PROP_UINT32("aperture-size", SiFiveCLINTState, aperture_size, 0), + DEFINE_PROP_UINT32("timebase-freq", SiFiveCLINTState, timebase_freq, 0), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ type_init(sifive_clint_register_types) */ DeviceState *sifive_clint_create(hwaddr addr, hwaddr size, uint32_t hartid_base, uint32_t num_harts, uint32_t sip_base, - uint32_t timecmp_base, uint32_t time_base, bool provide_rdtime) + uint32_t timecmp_base, uint32_t time_base, uint32_t timebase_freq, + bool provide_rdtime) { int i; for (i = 0; i < num_harts; i++) { @@ -XXX,XX +XXX,XX @@ DeviceState *sifive_clint_create(hwaddr addr, hwaddr size, continue; } if (provide_rdtime) { - riscv_cpu_set_rdtime_fn(env, cpu_riscv_read_rtc); + riscv_cpu_set_rdtime_fn(env, cpu_riscv_read_rtc, timebase_freq); } env->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, &sifive_clint_timer_cb, cpu); @@ -XXX,XX +XXX,XX @@ DeviceState *sifive_clint_create(hwaddr addr, hwaddr size, qdev_prop_set_uint32(dev, "timecmp-base", timecmp_base); qdev_prop_set_uint32(dev, "time-base", time_base); qdev_prop_set_uint32(dev, "aperture-size", size); + qdev_prop_set_uint32(dev, "timebase-freq", timebase_freq); sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, addr); return dev; diff --git a/hw/riscv/sifive_e.c b/hw/riscv/sifive_e.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/sifive_e.c +++ b/hw/riscv/sifive_e.c @@ -XXX,XX +XXX,XX @@ static void sifive_e_soc_realize(DeviceState *dev, Error **errp) memmap[SIFIVE_E_PLIC].size); sifive_clint_create(memmap[SIFIVE_E_CLINT].base, memmap[SIFIVE_E_CLINT].size, 0, ms->smp.cpus, - SIFIVE_SIP_BASE, SIFIVE_TIMECMP_BASE, SIFIVE_TIME_BASE, false); + SIFIVE_SIP_BASE, SIFIVE_TIMECMP_BASE, SIFIVE_TIME_BASE, + SIFIVE_CLINT_TIMEBASE_FREQ, false); create_unimplemented_device("riscv.sifive.e.aon", memmap[SIFIVE_E_AON].base, memmap[SIFIVE_E_AON].size); sifive_e_prci_create(memmap[SIFIVE_E_PRCI].base); diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/sifive_u.c +++ b/hw/riscv/sifive_u.c @@ -XXX,XX +XXX,XX @@ static void sifive_u_soc_realize(DeviceState *dev, Error **errp) serial_hd(1), qdev_get_gpio_in(DEVICE(s->plic), SIFIVE_U_UART1_IRQ)); sifive_clint_create(memmap[SIFIVE_U_CLINT].base, memmap[SIFIVE_U_CLINT].size, 0, ms->smp.cpus, - SIFIVE_SIP_BASE, SIFIVE_TIMECMP_BASE, SIFIVE_TIME_BASE, false); + SIFIVE_SIP_BASE, SIFIVE_TIMECMP_BASE, SIFIVE_TIME_BASE, + SIFIVE_CLINT_TIMEBASE_FREQ, false); if (!sysbus_realize(SYS_BUS_DEVICE(&s->prci), errp)) { return; diff --git a/hw/riscv/spike.c b/hw/riscv/spike.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/spike.c +++ b/hw/riscv/spike.c @@ -XXX,XX +XXX,XX @@ static void spike_board_init(MachineState *machine) sifive_clint_create( memmap[SPIKE_CLINT].base + i * memmap[SPIKE_CLINT].size, memmap[SPIKE_CLINT].size, base_hartid, hart_count, - SIFIVE_SIP_BASE, SIFIVE_TIMECMP_BASE, SIFIVE_TIME_BASE, false); + SIFIVE_SIP_BASE, SIFIVE_TIMECMP_BASE, SIFIVE_TIME_BASE, + SIFIVE_CLINT_TIMEBASE_FREQ, false); } /* register system main memory (actual RAM) */ diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_machine_init(MachineState *machine) sifive_clint_create( memmap[VIRT_CLINT].base + i * memmap[VIRT_CLINT].size, memmap[VIRT_CLINT].size, base_hartid, hart_count, - SIFIVE_SIP_BASE, SIFIVE_TIMECMP_BASE, SIFIVE_TIME_BASE, true); + SIFIVE_SIP_BASE, SIFIVE_TIMECMP_BASE, SIFIVE_TIME_BASE, + SIFIVE_CLINT_TIMEBASE_FREQ, true); /* Per-socket PLIC hart topology configuration string */ plic_hart_config_len = diff --git a/target/riscv/cpu_helper.c b/target/riscv/cpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu_helper.c +++ b/target/riscv/cpu_helper.c @@ -XXX,XX +XXX,XX @@ uint32_t riscv_cpu_update_mip(RISCVCPU *cpu, uint32_t mask, uint32_t value) return old; } -void riscv_cpu_set_rdtime_fn(CPURISCVState *env, uint64_t (*fn)(void)) +void riscv_cpu_set_rdtime_fn(CPURISCVState *env, uint64_t (*fn)(uint32_t), + uint32_t arg) { env->rdtime_fn = fn; + env->rdtime_fn_arg = arg; } void riscv_cpu_set_mode(CPURISCVState *env, target_ulong newpriv) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static int read_time(CPURISCVState *env, int csrno, target_ulong *val) return -RISCV_EXCP_ILLEGAL_INST; } - *val = env->rdtime_fn() + delta; + *val = env->rdtime_fn(env->rdtime_fn_arg) + delta; return 0; } @@ -XXX,XX +XXX,XX @@ static int read_timeh(CPURISCVState *env, int csrno, target_ulong *val) return -RISCV_EXCP_ILLEGAL_INST; } - *val = (env->rdtime_fn() + delta) >> 32; + *val = (env->rdtime_fn(env->rdtime_fn_arg) + delta) >> 32; return 0; } #endif -- 2.28.0 From: Bin Meng <bin.meng@windriver.com> SiFive FU540 SoC integrates a platform DMA controller with 4 DMA channels. This connects the exsiting SiFive PDMA model to the SoC, and adds its device tree data as well. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-17-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/riscv/sifive_u.h | 11 +++++++++++ hw/riscv/sifive_u.c | 30 ++++++++++++++++++++++++++++++ hw/riscv/Kconfig | 1 + 3 files changed, 42 insertions(+) diff --git a/include/hw/riscv/sifive_u.h b/include/hw/riscv/sifive_u.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/riscv/sifive_u.h +++ b/include/hw/riscv/sifive_u.h @@ -XXX,XX +XXX,XX @@ #ifndef HW_SIFIVE_U_H #define HW_SIFIVE_U_H +#include "hw/dma/sifive_pdma.h" #include "hw/net/cadence_gem.h" #include "hw/riscv/riscv_hart.h" #include "hw/riscv/sifive_cpu.h" @@ -XXX,XX +XXX,XX @@ typedef struct SiFiveUSoCState { SiFiveUPRCIState prci; SIFIVEGPIOState gpio; SiFiveUOTPState otp; + SiFivePDMAState dma; CadenceGEMState gem; uint32_t serial; @@ -XXX,XX +XXX,XX @@ enum { SIFIVE_U_MROM, SIFIVE_U_CLINT, SIFIVE_U_L2CC, + SIFIVE_U_PDMA, SIFIVE_U_L2LIM, SIFIVE_U_PLIC, SIFIVE_U_PRCI, @@ -XXX,XX +XXX,XX @@ enum { SIFIVE_U_GPIO_IRQ13 = 20, SIFIVE_U_GPIO_IRQ14 = 21, SIFIVE_U_GPIO_IRQ15 = 22, + SIFIVE_U_PDMA_IRQ0 = 23, + SIFIVE_U_PDMA_IRQ1 = 24, + SIFIVE_U_PDMA_IRQ2 = 25, + SIFIVE_U_PDMA_IRQ3 = 26, + SIFIVE_U_PDMA_IRQ4 = 27, + SIFIVE_U_PDMA_IRQ5 = 28, + SIFIVE_U_PDMA_IRQ6 = 29, + SIFIVE_U_PDMA_IRQ7 = 30, SIFIVE_U_GEM_IRQ = 0x35 }; diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/sifive_u.c +++ b/hw/riscv/sifive_u.c @@ -XXX,XX +XXX,XX @@ * 4) GPIO (General Purpose Input/Output Controller) * 5) OTP (One-Time Programmable) memory with stored serial number * 6) GEM (Gigabit Ethernet Controller) and management block + * 7) DMA (Direct Memory Access Controller) * * This board currently generates devicetree dynamically that indicates at least * two harts and up to five harts. @@ -XXX,XX +XXX,XX @@ static const struct MemmapEntry { [SIFIVE_U_MROM] = { 0x1000, 0xf000 }, [SIFIVE_U_CLINT] = { 0x2000000, 0x10000 }, [SIFIVE_U_L2CC] = { 0x2010000, 0x1000 }, + [SIFIVE_U_PDMA] = { 0x3000000, 0x100000 }, [SIFIVE_U_L2LIM] = { 0x8000000, 0x2000000 }, [SIFIVE_U_PLIC] = { 0xc000000, 0x4000000 }, [SIFIVE_U_PRCI] = { 0x10000000, 0x1000 }, @@ -XXX,XX +XXX,XX @@ static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap, qemu_fdt_setprop_string(fdt, nodename, "compatible", "gpio-restart"); g_free(nodename); + nodename = g_strdup_printf("/soc/dma@%lx", + (long)memmap[SIFIVE_U_PDMA].base); + qemu_fdt_add_subnode(fdt, nodename); + qemu_fdt_setprop_cell(fdt, nodename, "#dma-cells", 1); + qemu_fdt_setprop_cells(fdt, nodename, "interrupts", + SIFIVE_U_PDMA_IRQ0, SIFIVE_U_PDMA_IRQ1, SIFIVE_U_PDMA_IRQ2, + SIFIVE_U_PDMA_IRQ3, SIFIVE_U_PDMA_IRQ4, SIFIVE_U_PDMA_IRQ5, + SIFIVE_U_PDMA_IRQ6, SIFIVE_U_PDMA_IRQ7); + qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle); + qemu_fdt_setprop_cells(fdt, nodename, "reg", + 0x0, memmap[SIFIVE_U_PDMA].base, + 0x0, memmap[SIFIVE_U_PDMA].size); + qemu_fdt_setprop_string(fdt, nodename, "compatible", + "sifive,fu540-c000-pdma"); + g_free(nodename); + nodename = g_strdup_printf("/soc/cache-controller@%lx", (long)memmap[SIFIVE_U_L2CC].base); qemu_fdt_add_subnode(fdt, nodename); @@ -XXX,XX +XXX,XX @@ static void sifive_u_soc_instance_init(Object *obj) object_initialize_child(obj, "otp", &s->otp, TYPE_SIFIVE_U_OTP); object_initialize_child(obj, "gem", &s->gem, TYPE_CADENCE_GEM); object_initialize_child(obj, "gpio", &s->gpio, TYPE_SIFIVE_GPIO); + object_initialize_child(obj, "pdma", &s->dma, TYPE_SIFIVE_PDMA); } static void sifive_u_soc_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void sifive_u_soc_realize(DeviceState *dev, Error **errp) SIFIVE_U_GPIO_IRQ0 + i)); } + /* PDMA */ + sysbus_realize(SYS_BUS_DEVICE(&s->dma), errp); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->dma), 0, memmap[SIFIVE_U_PDMA].base); + + /* Connect PDMA interrupts to the PLIC */ + for (i = 0; i < SIFIVE_PDMA_IRQS; i++) { + sysbus_connect_irq(SYS_BUS_DEVICE(&s->dma), i, + qdev_get_gpio_in(DEVICE(s->plic), + SIFIVE_U_PDMA_IRQ0 + i)); + } + qdev_prop_set_uint32(DEVICE(&s->otp), "serial", s->serial); if (!sysbus_realize(SYS_BUS_DEVICE(&s->otp), errp)) { return; diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/Kconfig +++ b/hw/riscv/Kconfig @@ -XXX,XX +XXX,XX @@ config SIFIVE_U select CADENCE select HART select SIFIVE + select SIFIVE_PDMA select UNIMP config SPIKE -- 2.28.0 From: Bin Meng <bin.meng@windriver.com> This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_e_prci model to hw/misc directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-2-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/{riscv => misc}/sifive_e_prci.h | 0 hw/{riscv => misc}/sifive_e_prci.c | 2 +- hw/riscv/sifive_e.c | 2 +- hw/misc/Kconfig | 3 +++ hw/misc/meson.build | 3 +++ hw/riscv/Kconfig | 1 + hw/riscv/meson.build | 1 - 7 files changed, 9 insertions(+), 3 deletions(-) rename include/hw/{riscv => misc}/sifive_e_prci.h (100%) rename hw/{riscv => misc}/sifive_e_prci.c (99%) diff --git a/include/hw/riscv/sifive_e_prci.h b/include/hw/misc/sifive_e_prci.h similarity index 100% rename from include/hw/riscv/sifive_e_prci.h rename to include/hw/misc/sifive_e_prci.h diff --git a/hw/riscv/sifive_e_prci.c b/hw/misc/sifive_e_prci.c similarity index 99% rename from hw/riscv/sifive_e_prci.c rename to hw/misc/sifive_e_prci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/sifive_e_prci.c +++ b/hw/misc/sifive_e_prci.c @@ -XXX,XX +XXX,XX @@ #include "qemu/log.h" #include "qemu/module.h" #include "hw/hw.h" -#include "hw/riscv/sifive_e_prci.h" +#include "hw/misc/sifive_e_prci.h" static uint64_t sifive_e_prci_read(void *opaque, hwaddr addr, unsigned int size) { diff --git a/hw/riscv/sifive_e.c b/hw/riscv/sifive_e.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/sifive_e.c +++ b/hw/riscv/sifive_e.c @@ -XXX,XX +XXX,XX @@ #include "hw/riscv/sifive_clint.h" #include "hw/riscv/sifive_uart.h" #include "hw/riscv/sifive_e.h" -#include "hw/riscv/sifive_e_prci.h" #include "hw/riscv/boot.h" +#include "hw/misc/sifive_e_prci.h" #include "chardev/char.h" #include "sysemu/arch_init.h" #include "sysemu/sysemu.h" diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -XXX,XX +XXX,XX @@ config MAC_VIA config AVR_POWER bool +config SIFIVE_E_PRCI + bool + source macio/Kconfig diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_ARM11SCU', if_true: files('arm11scu.c')) # Mac devices softmmu_ss.add(when: 'CONFIG_MOS6522', if_true: files('mos6522.c')) +# RISC-V devices +softmmu_ss.add(when: 'CONFIG_SIFIVE_E_PRCI', if_true: files('sifive_e_prci.c')) + # PKUnity SoC devices softmmu_ss.add(when: 'CONFIG_PUV3', if_true: files('puv3_pm.c')) diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/Kconfig +++ b/hw/riscv/Kconfig @@ -XXX,XX +XXX,XX @@ config SIFIVE_E bool select HART select SIFIVE + select SIFIVE_E_PRCI select UNIMP config SIFIVE_U diff --git a/hw/riscv/meson.build b/hw/riscv/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/meson.build +++ b/hw/riscv/meson.build @@ -XXX,XX +XXX,XX @@ riscv_ss.add(when: 'CONFIG_SIFIVE', if_true: files('sifive_plic.c')) riscv_ss.add(when: 'CONFIG_SIFIVE', if_true: files('sifive_test.c')) riscv_ss.add(when: 'CONFIG_SIFIVE', if_true: files('sifive_uart.c')) riscv_ss.add(when: 'CONFIG_SIFIVE_E', if_true: files('sifive_e.c')) -riscv_ss.add(when: 'CONFIG_SIFIVE_E', if_true: files('sifive_e_prci.c')) riscv_ss.add(when: 'CONFIG_SIFIVE_U', if_true: files('sifive_u.c')) riscv_ss.add(when: 'CONFIG_SIFIVE_U', if_true: files('sifive_u_otp.c')) riscv_ss.add(when: 'CONFIG_SIFIVE_U', if_true: files('sifive_u_prci.c')) -- 2.28.0 From: Bin Meng <bin.meng@windriver.com> This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_u_prci model to hw/misc directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-3-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/{riscv => misc}/sifive_u_prci.h | 0 include/hw/riscv/sifive_u.h | 2 +- hw/{riscv => misc}/sifive_u_prci.c | 2 +- hw/misc/Kconfig | 3 +++ hw/misc/meson.build | 1 + hw/riscv/Kconfig | 1 + hw/riscv/meson.build | 1 - 7 files changed, 7 insertions(+), 3 deletions(-) rename include/hw/{riscv => misc}/sifive_u_prci.h (100%) rename hw/{riscv => misc}/sifive_u_prci.c (99%) diff --git a/include/hw/riscv/sifive_u_prci.h b/include/hw/misc/sifive_u_prci.h similarity index 100% rename from include/hw/riscv/sifive_u_prci.h rename to include/hw/misc/sifive_u_prci.h diff --git a/include/hw/riscv/sifive_u.h b/include/hw/riscv/sifive_u.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/riscv/sifive_u.h +++ b/include/hw/riscv/sifive_u.h @@ -XXX,XX +XXX,XX @@ #include "hw/riscv/riscv_hart.h" #include "hw/riscv/sifive_cpu.h" #include "hw/riscv/sifive_gpio.h" -#include "hw/riscv/sifive_u_prci.h" #include "hw/riscv/sifive_u_otp.h" +#include "hw/misc/sifive_u_prci.h" #define TYPE_RISCV_U_SOC "riscv.sifive.u.soc" #define RISCV_U_SOC(obj) \ diff --git a/hw/riscv/sifive_u_prci.c b/hw/misc/sifive_u_prci.c similarity index 99% rename from hw/riscv/sifive_u_prci.c rename to hw/misc/sifive_u_prci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/sifive_u_prci.c +++ b/hw/misc/sifive_u_prci.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "qemu/log.h" #include "qemu/module.h" -#include "hw/riscv/sifive_u_prci.h" +#include "hw/misc/sifive_u_prci.h" static uint64_t sifive_u_prci_read(void *opaque, hwaddr addr, unsigned int size) { diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -XXX,XX +XXX,XX @@ config AVR_POWER config SIFIVE_E_PRCI bool +config SIFIVE_U_PRCI + bool + source macio/Kconfig diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_MOS6522', if_true: files('mos6522.c')) # RISC-V devices softmmu_ss.add(when: 'CONFIG_SIFIVE_E_PRCI', if_true: files('sifive_e_prci.c')) +softmmu_ss.add(when: 'CONFIG_SIFIVE_U_PRCI', if_true: files('sifive_u_prci.c')) # PKUnity SoC devices softmmu_ss.add(when: 'CONFIG_PUV3', if_true: files('puv3_pm.c')) diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/Kconfig +++ b/hw/riscv/Kconfig @@ -XXX,XX +XXX,XX @@ config SIFIVE_U select HART select SIFIVE select SIFIVE_PDMA + select SIFIVE_U_PRCI select UNIMP config SPIKE diff --git a/hw/riscv/meson.build b/hw/riscv/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/meson.build +++ b/hw/riscv/meson.build @@ -XXX,XX +XXX,XX @@ riscv_ss.add(when: 'CONFIG_SIFIVE', if_true: files('sifive_uart.c')) riscv_ss.add(when: 'CONFIG_SIFIVE_E', if_true: files('sifive_e.c')) riscv_ss.add(when: 'CONFIG_SIFIVE_U', if_true: files('sifive_u.c')) riscv_ss.add(when: 'CONFIG_SIFIVE_U', if_true: files('sifive_u_otp.c')) -riscv_ss.add(when: 'CONFIG_SIFIVE_U', if_true: files('sifive_u_prci.c')) riscv_ss.add(when: 'CONFIG_SPIKE', if_true: files('riscv_htif.c')) riscv_ss.add(when: 'CONFIG_SPIKE', if_true: files('spike.c')) riscv_ss.add(when: 'CONFIG_MICROCHIP_PFSOC', if_true: files('microchip_pfsoc.c')) -- 2.28.0 From: Bin Meng <bin.meng@windriver.com> This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_u_otp model to hw/misc directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-4-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/{riscv => misc}/sifive_u_otp.h | 0 include/hw/riscv/sifive_u.h | 2 +- hw/{riscv => misc}/sifive_u_otp.c | 2 +- hw/misc/Kconfig | 3 +++ hw/misc/meson.build | 1 + hw/riscv/Kconfig | 1 + hw/riscv/meson.build | 1 - 7 files changed, 7 insertions(+), 3 deletions(-) rename include/hw/{riscv => misc}/sifive_u_otp.h (100%) rename hw/{riscv => misc}/sifive_u_otp.c (99%) diff --git a/include/hw/riscv/sifive_u_otp.h b/include/hw/misc/sifive_u_otp.h similarity index 100% rename from include/hw/riscv/sifive_u_otp.h rename to include/hw/misc/sifive_u_otp.h diff --git a/include/hw/riscv/sifive_u.h b/include/hw/riscv/sifive_u.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/riscv/sifive_u.h +++ b/include/hw/riscv/sifive_u.h @@ -XXX,XX +XXX,XX @@ #include "hw/riscv/riscv_hart.h" #include "hw/riscv/sifive_cpu.h" #include "hw/riscv/sifive_gpio.h" -#include "hw/riscv/sifive_u_otp.h" +#include "hw/misc/sifive_u_otp.h" #include "hw/misc/sifive_u_prci.h" #define TYPE_RISCV_U_SOC "riscv.sifive.u.soc" diff --git a/hw/riscv/sifive_u_otp.c b/hw/misc/sifive_u_otp.c similarity index 99% rename from hw/riscv/sifive_u_otp.c rename to hw/misc/sifive_u_otp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/sifive_u_otp.c +++ b/hw/misc/sifive_u_otp.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "qemu/log.h" #include "qemu/module.h" -#include "hw/riscv/sifive_u_otp.h" +#include "hw/misc/sifive_u_otp.h" static uint64_t sifive_u_otp_read(void *opaque, hwaddr addr, unsigned int size) { diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -XXX,XX +XXX,XX @@ config AVR_POWER config SIFIVE_E_PRCI bool +config SIFIVE_U_OTP + bool + config SIFIVE_U_PRCI bool diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_MOS6522', if_true: files('mos6522.c')) # RISC-V devices softmmu_ss.add(when: 'CONFIG_SIFIVE_E_PRCI', if_true: files('sifive_e_prci.c')) +softmmu_ss.add(when: 'CONFIG_SIFIVE_U_OTP', if_true: files('sifive_u_otp.c')) softmmu_ss.add(when: 'CONFIG_SIFIVE_U_PRCI', if_true: files('sifive_u_prci.c')) # PKUnity SoC devices diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/Kconfig +++ b/hw/riscv/Kconfig @@ -XXX,XX +XXX,XX @@ config SIFIVE_U select HART select SIFIVE select SIFIVE_PDMA + select SIFIVE_U_OTP select SIFIVE_U_PRCI select UNIMP diff --git a/hw/riscv/meson.build b/hw/riscv/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/meson.build +++ b/hw/riscv/meson.build @@ -XXX,XX +XXX,XX @@ riscv_ss.add(when: 'CONFIG_SIFIVE', if_true: files('sifive_test.c')) riscv_ss.add(when: 'CONFIG_SIFIVE', if_true: files('sifive_uart.c')) riscv_ss.add(when: 'CONFIG_SIFIVE_E', if_true: files('sifive_e.c')) riscv_ss.add(when: 'CONFIG_SIFIVE_U', if_true: files('sifive_u.c')) -riscv_ss.add(when: 'CONFIG_SIFIVE_U', if_true: files('sifive_u_otp.c')) riscv_ss.add(when: 'CONFIG_SPIKE', if_true: files('riscv_htif.c')) riscv_ss.add(when: 'CONFIG_SPIKE', if_true: files('spike.c')) riscv_ss.add(when: 'CONFIG_MICROCHIP_PFSOC', if_true: files('microchip_pfsoc.c')) -- 2.28.0 From: Bin Meng <bin.meng@windriver.com> This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_gpio model to hw/gpio directory. Note this also removes the trace-events in the hw/riscv directory, since gpio is the only supported trace target in that directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-5-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/trace.h | 1 - include/hw/{riscv => gpio}/sifive_gpio.h | 0 include/hw/riscv/sifive_e.h | 2 +- include/hw/riscv/sifive_u.h | 2 +- hw/{riscv => gpio}/sifive_gpio.c | 2 +- hw/gpio/Kconfig | 3 +++ hw/gpio/meson.build | 1 + hw/gpio/trace-events | 6 ++++++ hw/riscv/Kconfig | 2 ++ hw/riscv/meson.build | 1 - hw/riscv/trace-events | 7 ------- meson.build | 1 - 12 files changed, 15 insertions(+), 13 deletions(-) delete mode 100644 hw/riscv/trace.h rename include/hw/{riscv => gpio}/sifive_gpio.h (100%) rename hw/{riscv => gpio}/sifive_gpio.c (99%) delete mode 100644 hw/riscv/trace-events diff --git a/hw/riscv/trace.h b/hw/riscv/trace.h deleted file mode 100644 index XXXXXXX..XXXXXXX --- a/hw/riscv/trace.h +++ /dev/null @@ -1 +0,0 @@ -#include "trace/trace-hw_riscv.h" diff --git a/include/hw/riscv/sifive_gpio.h b/include/hw/gpio/sifive_gpio.h similarity index 100% rename from include/hw/riscv/sifive_gpio.h rename to include/hw/gpio/sifive_gpio.h diff --git a/include/hw/riscv/sifive_e.h b/include/hw/riscv/sifive_e.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/riscv/sifive_e.h +++ b/include/hw/riscv/sifive_e.h @@ -XXX,XX +XXX,XX @@ #include "hw/riscv/riscv_hart.h" #include "hw/riscv/sifive_cpu.h" -#include "hw/riscv/sifive_gpio.h" +#include "hw/gpio/sifive_gpio.h" #define TYPE_RISCV_E_SOC "riscv.sifive.e.soc" #define RISCV_E_SOC(obj) \ diff --git a/include/hw/riscv/sifive_u.h b/include/hw/riscv/sifive_u.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/riscv/sifive_u.h +++ b/include/hw/riscv/sifive_u.h @@ -XXX,XX +XXX,XX @@ #include "hw/net/cadence_gem.h" #include "hw/riscv/riscv_hart.h" #include "hw/riscv/sifive_cpu.h" -#include "hw/riscv/sifive_gpio.h" +#include "hw/gpio/sifive_gpio.h" #include "hw/misc/sifive_u_otp.h" #include "hw/misc/sifive_u_prci.h" diff --git a/hw/riscv/sifive_gpio.c b/hw/gpio/sifive_gpio.c similarity index 99% rename from hw/riscv/sifive_gpio.c rename to hw/gpio/sifive_gpio.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/sifive_gpio.c +++ b/hw/gpio/sifive_gpio.c @@ -XXX,XX +XXX,XX @@ #include "qemu/log.h" #include "hw/irq.h" #include "hw/qdev-properties.h" -#include "hw/riscv/sifive_gpio.h" +#include "hw/gpio/sifive_gpio.h" #include "migration/vmstate.h" #include "trace.h" diff --git a/hw/gpio/Kconfig b/hw/gpio/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/Kconfig +++ b/hw/gpio/Kconfig @@ -XXX,XX +XXX,XX @@ config PL061 config GPIO_KEY bool + +config SIFIVE_GPIO + bool diff --git a/hw/gpio/meson.build b/hw/gpio/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/meson.build +++ b/hw/gpio/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_NRF51_SOC', if_true: files('nrf51_gpio.c')) softmmu_ss.add(when: 'CONFIG_OMAP', if_true: files('omap_gpio.c')) softmmu_ss.add(when: 'CONFIG_RASPI', if_true: files('bcm2835_gpio.c')) softmmu_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_gpio.c')) +softmmu_ss.add(when: 'CONFIG_SIFIVE_GPIO', if_true: files('sifive_gpio.c')) diff --git a/hw/gpio/trace-events b/hw/gpio/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/trace-events +++ b/hw/gpio/trace-events @@ -XXX,XX +XXX,XX @@ nrf51_gpio_read(uint64_t offset, uint64_t r) "offset 0x%" PRIx64 " value 0x%" PR nrf51_gpio_write(uint64_t offset, uint64_t value) "offset 0x%" PRIx64 " value 0x%" PRIx64 nrf51_gpio_set(int64_t line, int64_t value) "line %" PRIi64 " value %" PRIi64 nrf51_gpio_update_output_irq(int64_t line, int64_t value) "line %" PRIi64 " value %" PRIi64 + +# sifive_gpio.c +sifive_gpio_read(uint64_t offset, uint64_t r) "offset 0x%" PRIx64 " value 0x%" PRIx64 +sifive_gpio_write(uint64_t offset, uint64_t value) "offset 0x%" PRIx64 " value 0x%" PRIx64 +sifive_gpio_set(int64_t line, int64_t value) "line %" PRIi64 " value %" PRIi64 +sifive_gpio_update_output_irq(int64_t line, int64_t value) "line %" PRIi64 " value %" PRIi64 diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/Kconfig +++ b/hw/riscv/Kconfig @@ -XXX,XX +XXX,XX @@ config SIFIVE_E bool select HART select SIFIVE + select SIFIVE_GPIO select SIFIVE_E_PRCI select UNIMP @@ -XXX,XX +XXX,XX @@ config SIFIVE_U select CADENCE select HART select SIFIVE + select SIFIVE_GPIO select SIFIVE_PDMA select SIFIVE_U_OTP select SIFIVE_U_PRCI diff --git a/hw/riscv/meson.build b/hw/riscv/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/meson.build +++ b/hw/riscv/meson.build @@ -XXX,XX +XXX,XX @@ riscv_ss.add(when: 'CONFIG_HART', if_true: files('riscv_hart.c')) riscv_ss.add(when: 'CONFIG_OPENTITAN', if_true: files('opentitan.c')) riscv_ss.add(when: 'CONFIG_RISCV_VIRT', if_true: files('virt.c')) riscv_ss.add(when: 'CONFIG_SIFIVE', if_true: files('sifive_clint.c')) -riscv_ss.add(when: 'CONFIG_SIFIVE', if_true: files('sifive_gpio.c')) riscv_ss.add(when: 'CONFIG_SIFIVE', if_true: files('sifive_plic.c')) riscv_ss.add(when: 'CONFIG_SIFIVE', if_true: files('sifive_test.c')) riscv_ss.add(when: 'CONFIG_SIFIVE', if_true: files('sifive_uart.c')) diff --git a/hw/riscv/trace-events b/hw/riscv/trace-events deleted file mode 100644 index XXXXXXX..XXXXXXX --- a/hw/riscv/trace-events +++ /dev/null @@ -XXX,XX +XXX,XX @@ -# See docs/devel/tracing.txt for syntax documentation. - -# hw/gpio/sifive_gpio.c -sifive_gpio_read(uint64_t offset, uint64_t r) "offset 0x%" PRIx64 " value 0x%" PRIx64 -sifive_gpio_write(uint64_t offset, uint64_t value) "offset 0x%" PRIx64 " value 0x%" PRIx64 -sifive_gpio_set(int64_t line, int64_t value) "line %" PRIi64 " value %" PRIi64 -sifive_gpio_update_output_irq(int64_t line, int64_t value) "line %" PRIi64 " value %" PRIi64 diff --git a/meson.build b/meson.build index XXXXXXX..XXXXXXX 100644 --- a/meson.build +++ b/meson.build @@ -XXX,XX +XXX,XX @@ if have_system 'hw/watchdog', 'hw/xen', 'hw/gpio', - 'hw/riscv', 'migration', 'net', 'ui', -- 2.28.0 From: Bin Meng <bin.meng@windriver.com> This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_clint model to hw/intc directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-6-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/{riscv => intc}/sifive_clint.h | 0 hw/{riscv => intc}/sifive_clint.c | 2 +- hw/riscv/microchip_pfsoc.c | 2 +- hw/riscv/sifive_e.c | 2 +- hw/riscv/sifive_u.c | 2 +- hw/riscv/spike.c | 2 +- hw/riscv/virt.c | 2 +- hw/intc/Kconfig | 3 +++ hw/intc/meson.build | 1 + hw/riscv/Kconfig | 5 +++++ hw/riscv/meson.build | 1 - 11 files changed, 15 insertions(+), 7 deletions(-) rename include/hw/{riscv => intc}/sifive_clint.h (100%) rename hw/{riscv => intc}/sifive_clint.c (99%) diff --git a/include/hw/riscv/sifive_clint.h b/include/hw/intc/sifive_clint.h similarity index 100% rename from include/hw/riscv/sifive_clint.h rename to include/hw/intc/sifive_clint.h diff --git a/hw/riscv/sifive_clint.c b/hw/intc/sifive_clint.c similarity index 99% rename from hw/riscv/sifive_clint.c rename to hw/intc/sifive_clint.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/sifive_clint.c +++ b/hw/intc/sifive_clint.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "target/riscv/cpu.h" #include "hw/qdev-properties.h" -#include "hw/riscv/sifive_clint.h" +#include "hw/intc/sifive_clint.h" #include "qemu/timer.h" static uint64_t cpu_riscv_read_rtc(uint32_t timebase_freq) diff --git a/hw/riscv/microchip_pfsoc.c b/hw/riscv/microchip_pfsoc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/microchip_pfsoc.c +++ b/hw/riscv/microchip_pfsoc.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/unimp.h" #include "hw/riscv/boot.h" #include "hw/riscv/riscv_hart.h" -#include "hw/riscv/sifive_clint.h" #include "hw/riscv/sifive_plic.h" #include "hw/riscv/microchip_pfsoc.h" +#include "hw/intc/sifive_clint.h" #include "sysemu/sysemu.h" /* diff --git a/hw/riscv/sifive_e.c b/hw/riscv/sifive_e.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/sifive_e.c +++ b/hw/riscv/sifive_e.c @@ -XXX,XX +XXX,XX @@ #include "target/riscv/cpu.h" #include "hw/riscv/riscv_hart.h" #include "hw/riscv/sifive_plic.h" -#include "hw/riscv/sifive_clint.h" #include "hw/riscv/sifive_uart.h" #include "hw/riscv/sifive_e.h" #include "hw/riscv/boot.h" +#include "hw/intc/sifive_clint.h" #include "hw/misc/sifive_e_prci.h" #include "chardev/char.h" #include "sysemu/arch_init.h" diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/sifive_u.c +++ b/hw/riscv/sifive_u.c @@ -XXX,XX +XXX,XX @@ #include "target/riscv/cpu.h" #include "hw/riscv/riscv_hart.h" #include "hw/riscv/sifive_plic.h" -#include "hw/riscv/sifive_clint.h" #include "hw/riscv/sifive_uart.h" #include "hw/riscv/sifive_u.h" #include "hw/riscv/boot.h" +#include "hw/intc/sifive_clint.h" #include "chardev/char.h" #include "net/eth.h" #include "sysemu/arch_init.h" diff --git a/hw/riscv/spike.c b/hw/riscv/spike.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/spike.c +++ b/hw/riscv/spike.c @@ -XXX,XX +XXX,XX @@ #include "target/riscv/cpu.h" #include "hw/riscv/riscv_htif.h" #include "hw/riscv/riscv_hart.h" -#include "hw/riscv/sifive_clint.h" #include "hw/riscv/spike.h" #include "hw/riscv/boot.h" #include "hw/riscv/numa.h" +#include "hw/intc/sifive_clint.h" #include "chardev/char.h" #include "sysemu/arch_init.h" #include "sysemu/device_tree.h" diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ #include "target/riscv/cpu.h" #include "hw/riscv/riscv_hart.h" #include "hw/riscv/sifive_plic.h" -#include "hw/riscv/sifive_clint.h" #include "hw/riscv/sifive_test.h" #include "hw/riscv/virt.h" #include "hw/riscv/boot.h" #include "hw/riscv/numa.h" +#include "hw/intc/sifive_clint.h" #include "chardev/char.h" #include "sysemu/arch_init.h" #include "sysemu/device_tree.h" diff --git a/hw/intc/Kconfig b/hw/intc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/Kconfig +++ b/hw/intc/Kconfig @@ -XXX,XX +XXX,XX @@ config RX_ICU config LOONGSON_LIOINTC bool + +config SIFIVE_CLINT + bool diff --git a/hw/intc/meson.build b/hw/intc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/meson.build +++ b/hw/intc/meson.build @@ -XXX,XX +XXX,XX @@ specific_ss.add(when: 'CONFIG_RX_ICU', if_true: files('rx_icu.c')) specific_ss.add(when: 'CONFIG_S390_FLIC', if_true: files('s390_flic.c')) specific_ss.add(when: 'CONFIG_S390_FLIC_KVM', if_true: files('s390_flic_kvm.c')) specific_ss.add(when: 'CONFIG_SH4', if_true: files('sh_intc.c')) +specific_ss.add(when: 'CONFIG_SIFIVE_CLINT', if_true: files('sifive_clint.c')) specific_ss.add(when: 'CONFIG_XICS', if_true: files('xics.c')) specific_ss.add(when: 'CONFIG_XICS_KVM', if_true: files('xics_kvm.c')) specific_ss.add(when: 'CONFIG_XICS_SPAPR', if_true: files('xics_spapr.c')) diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/Kconfig +++ b/hw/riscv/Kconfig @@ -XXX,XX +XXX,XX @@ config SIFIVE_E bool select HART select SIFIVE + select SIFIVE_CLINT select SIFIVE_GPIO select SIFIVE_E_PRCI select UNIMP @@ -XXX,XX +XXX,XX @@ config SIFIVE_U select CADENCE select HART select SIFIVE + select SIFIVE_CLINT select SIFIVE_GPIO select SIFIVE_PDMA select SIFIVE_U_OTP @@ -XXX,XX +XXX,XX @@ config SPIKE select HART select HTIF select SIFIVE + select SIFIVE_CLINT config OPENTITAN bool @@ -XXX,XX +XXX,XX @@ config RISCV_VIRT select PCI_EXPRESS_GENERIC_BRIDGE select PFLASH_CFI01 select SIFIVE + select SIFIVE_CLINT config MICROCHIP_PFSOC bool select HART select SIFIVE + select SIFIVE_CLINT select UNIMP select MCHP_PFSOC_MMUART select SIFIVE_PDMA diff --git a/hw/riscv/meson.build b/hw/riscv/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/meson.build +++ b/hw/riscv/meson.build @@ -XXX,XX +XXX,XX @@ riscv_ss.add(files('numa.c')) riscv_ss.add(when: 'CONFIG_HART', if_true: files('riscv_hart.c')) riscv_ss.add(when: 'CONFIG_OPENTITAN', if_true: files('opentitan.c')) riscv_ss.add(when: 'CONFIG_RISCV_VIRT', if_true: files('virt.c')) -riscv_ss.add(when: 'CONFIG_SIFIVE', if_true: files('sifive_clint.c')) riscv_ss.add(when: 'CONFIG_SIFIVE', if_true: files('sifive_plic.c')) riscv_ss.add(when: 'CONFIG_SIFIVE', if_true: files('sifive_test.c')) riscv_ss.add(when: 'CONFIG_SIFIVE', if_true: files('sifive_uart.c')) -- 2.28.0 From: Bin Meng <bin.meng@windriver.com> This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_plic model to hw/intc directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-7-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- {include/hw/riscv => hw/intc}/sifive_plic.h | 0 hw/{riscv => intc}/sifive_plic.c | 2 +- hw/riscv/microchip_pfsoc.c | 2 +- hw/riscv/sifive_e.c | 2 +- hw/riscv/sifive_u.c | 2 +- hw/riscv/virt.c | 2 +- hw/intc/Kconfig | 3 +++ hw/intc/meson.build | 1 + hw/riscv/Kconfig | 5 +++++ hw/riscv/meson.build | 1 - 10 files changed, 14 insertions(+), 6 deletions(-) rename {include/hw/riscv => hw/intc}/sifive_plic.h (100%) rename hw/{riscv => intc}/sifive_plic.c (99%) diff --git a/include/hw/riscv/sifive_plic.h b/hw/intc/sifive_plic.h similarity index 100% rename from include/hw/riscv/sifive_plic.h rename to hw/intc/sifive_plic.h diff --git a/hw/riscv/sifive_plic.c b/hw/intc/sifive_plic.c similarity index 99% rename from hw/riscv/sifive_plic.c rename to hw/intc/sifive_plic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/sifive_plic.c +++ b/hw/intc/sifive_plic.c @@ -XXX,XX +XXX,XX @@ #include "hw/pci/msi.h" #include "hw/boards.h" #include "hw/qdev-properties.h" +#include "hw/intc/sifive_plic.h" #include "target/riscv/cpu.h" #include "sysemu/sysemu.h" -#include "hw/riscv/sifive_plic.h" #define RISCV_DEBUG_PLIC 0 diff --git a/hw/riscv/microchip_pfsoc.c b/hw/riscv/microchip_pfsoc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/microchip_pfsoc.c +++ b/hw/riscv/microchip_pfsoc.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/unimp.h" #include "hw/riscv/boot.h" #include "hw/riscv/riscv_hart.h" -#include "hw/riscv/sifive_plic.h" #include "hw/riscv/microchip_pfsoc.h" #include "hw/intc/sifive_clint.h" +#include "hw/intc/sifive_plic.h" #include "sysemu/sysemu.h" /* diff --git a/hw/riscv/sifive_e.c b/hw/riscv/sifive_e.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/sifive_e.c +++ b/hw/riscv/sifive_e.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/unimp.h" #include "target/riscv/cpu.h" #include "hw/riscv/riscv_hart.h" -#include "hw/riscv/sifive_plic.h" #include "hw/riscv/sifive_uart.h" #include "hw/riscv/sifive_e.h" #include "hw/riscv/boot.h" #include "hw/intc/sifive_clint.h" +#include "hw/intc/sifive_plic.h" #include "hw/misc/sifive_e_prci.h" #include "chardev/char.h" #include "sysemu/arch_init.h" diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/sifive_u.c +++ b/hw/riscv/sifive_u.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/unimp.h" #include "target/riscv/cpu.h" #include "hw/riscv/riscv_hart.h" -#include "hw/riscv/sifive_plic.h" #include "hw/riscv/sifive_uart.h" #include "hw/riscv/sifive_u.h" #include "hw/riscv/boot.h" #include "hw/intc/sifive_clint.h" +#include "hw/intc/sifive_plic.h" #include "chardev/char.h" #include "net/eth.h" #include "sysemu/arch_init.h" diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ #include "hw/char/serial.h" #include "target/riscv/cpu.h" #include "hw/riscv/riscv_hart.h" -#include "hw/riscv/sifive_plic.h" #include "hw/riscv/sifive_test.h" #include "hw/riscv/virt.h" #include "hw/riscv/boot.h" #include "hw/riscv/numa.h" #include "hw/intc/sifive_clint.h" +#include "hw/intc/sifive_plic.h" #include "chardev/char.h" #include "sysemu/arch_init.h" #include "sysemu/device_tree.h" diff --git a/hw/intc/Kconfig b/hw/intc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/Kconfig +++ b/hw/intc/Kconfig @@ -XXX,XX +XXX,XX @@ config LOONGSON_LIOINTC config SIFIVE_CLINT bool + +config SIFIVE_PLIC + bool diff --git a/hw/intc/meson.build b/hw/intc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/meson.build +++ b/hw/intc/meson.build @@ -XXX,XX +XXX,XX @@ specific_ss.add(when: 'CONFIG_S390_FLIC', if_true: files('s390_flic.c')) specific_ss.add(when: 'CONFIG_S390_FLIC_KVM', if_true: files('s390_flic_kvm.c')) specific_ss.add(when: 'CONFIG_SH4', if_true: files('sh_intc.c')) specific_ss.add(when: 'CONFIG_SIFIVE_CLINT', if_true: files('sifive_clint.c')) +specific_ss.add(when: 'CONFIG_SIFIVE_PLIC', if_true: files('sifive_plic.c')) specific_ss.add(when: 'CONFIG_XICS', if_true: files('xics.c')) specific_ss.add(when: 'CONFIG_XICS_KVM', if_true: files('xics_kvm.c')) specific_ss.add(when: 'CONFIG_XICS_SPAPR', if_true: files('xics_spapr.c')) diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/Kconfig +++ b/hw/riscv/Kconfig @@ -XXX,XX +XXX,XX @@ config SIFIVE_E select SIFIVE select SIFIVE_CLINT select SIFIVE_GPIO + select SIFIVE_PLIC select SIFIVE_E_PRCI select UNIMP @@ -XXX,XX +XXX,XX @@ config SIFIVE_U select SIFIVE_CLINT select SIFIVE_GPIO select SIFIVE_PDMA + select SIFIVE_PLIC select SIFIVE_U_OTP select SIFIVE_U_PRCI select UNIMP @@ -XXX,XX +XXX,XX @@ config SPIKE select HTIF select SIFIVE select SIFIVE_CLINT + select SIFIVE_PLIC config OPENTITAN bool @@ -XXX,XX +XXX,XX @@ config RISCV_VIRT select PFLASH_CFI01 select SIFIVE select SIFIVE_CLINT + select SIFIVE_PLIC config MICROCHIP_PFSOC bool @@ -XXX,XX +XXX,XX @@ config MICROCHIP_PFSOC select UNIMP select MCHP_PFSOC_MMUART select SIFIVE_PDMA + select SIFIVE_PLIC select CADENCE_SDHCI diff --git a/hw/riscv/meson.build b/hw/riscv/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/meson.build +++ b/hw/riscv/meson.build @@ -XXX,XX +XXX,XX @@ riscv_ss.add(files('numa.c')) riscv_ss.add(when: 'CONFIG_HART', if_true: files('riscv_hart.c')) riscv_ss.add(when: 'CONFIG_OPENTITAN', if_true: files('opentitan.c')) riscv_ss.add(when: 'CONFIG_RISCV_VIRT', if_true: files('virt.c')) -riscv_ss.add(when: 'CONFIG_SIFIVE', if_true: files('sifive_plic.c')) riscv_ss.add(when: 'CONFIG_SIFIVE', if_true: files('sifive_test.c')) riscv_ss.add(when: 'CONFIG_SIFIVE', if_true: files('sifive_uart.c')) riscv_ss.add(when: 'CONFIG_SIFIVE_E', if_true: files('sifive_e.c')) -- 2.28.0 From: Bin Meng <bin.meng@windriver.com> This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move riscv_htif model to hw/char directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-8-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/{riscv => char}/riscv_htif.h | 0 hw/{riscv => char}/riscv_htif.c | 2 +- hw/riscv/spike.c | 2 +- hw/char/Kconfig | 3 +++ hw/char/meson.build | 1 + hw/riscv/Kconfig | 3 --- hw/riscv/meson.build | 1 - 7 files changed, 6 insertions(+), 6 deletions(-) rename include/hw/{riscv => char}/riscv_htif.h (100%) rename hw/{riscv => char}/riscv_htif.c (99%) diff --git a/include/hw/riscv/riscv_htif.h b/include/hw/char/riscv_htif.h similarity index 100% rename from include/hw/riscv/riscv_htif.h rename to include/hw/char/riscv_htif.h diff --git a/hw/riscv/riscv_htif.c b/hw/char/riscv_htif.c similarity index 99% rename from hw/riscv/riscv_htif.c rename to hw/char/riscv_htif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv_htif.c +++ b/hw/char/riscv_htif.c @@ -XXX,XX +XXX,XX @@ #include "qapi/error.h" #include "qemu/log.h" #include "hw/sysbus.h" +#include "hw/char/riscv_htif.h" #include "hw/char/serial.h" #include "chardev/char.h" #include "chardev/char-fe.h" -#include "hw/riscv/riscv_htif.h" #include "qemu/timer.h" #include "qemu/error-report.h" diff --git a/hw/riscv/spike.c b/hw/riscv/spike.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/spike.c +++ b/hw/riscv/spike.c @@ -XXX,XX +XXX,XX @@ #include "hw/loader.h" #include "hw/sysbus.h" #include "target/riscv/cpu.h" -#include "hw/riscv/riscv_htif.h" #include "hw/riscv/riscv_hart.h" #include "hw/riscv/spike.h" #include "hw/riscv/boot.h" #include "hw/riscv/numa.h" +#include "hw/char/riscv_htif.h" #include "hw/intc/sifive_clint.h" #include "chardev/char.h" #include "sysemu/arch_init.h" diff --git a/hw/char/Kconfig b/hw/char/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/char/Kconfig +++ b/hw/char/Kconfig @@ -XXX,XX +XXX,XX @@ config ESCC bool +config HTIF + bool + config PARALLEL bool default y diff --git a/hw/char/meson.build b/hw/char/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/char/meson.build +++ b/hw/char/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_SH4', if_true: files('sh_serial.c')) softmmu_ss.add(when: 'CONFIG_STM32F2XX_USART', if_true: files('stm32f2xx_usart.c')) softmmu_ss.add(when: 'CONFIG_MCHP_PFSOC_MMUART', if_true: files('mchp_pfsoc_mmuart.c')) +specific_ss.add(when: 'CONFIG_HTIF', if_true: files('riscv_htif.c')) specific_ss.add(when: 'CONFIG_TERMINAL3270', if_true: files('terminal3270.c')) specific_ss.add(when: 'CONFIG_VIRTIO', if_true: files('virtio-serial-bus.c')) specific_ss.add(when: 'CONFIG_PSERIES', if_true: files('spapr_vty.c')) diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/Kconfig +++ b/hw/riscv/Kconfig @@ -XXX,XX +XXX,XX @@ -config HTIF - bool - config HART bool diff --git a/hw/riscv/meson.build b/hw/riscv/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/meson.build +++ b/hw/riscv/meson.build @@ -XXX,XX +XXX,XX @@ riscv_ss.add(when: 'CONFIG_SIFIVE', if_true: files('sifive_test.c')) riscv_ss.add(when: 'CONFIG_SIFIVE', if_true: files('sifive_uart.c')) riscv_ss.add(when: 'CONFIG_SIFIVE_E', if_true: files('sifive_e.c')) riscv_ss.add(when: 'CONFIG_SIFIVE_U', if_true: files('sifive_u.c')) -riscv_ss.add(when: 'CONFIG_SPIKE', if_true: files('riscv_htif.c')) riscv_ss.add(when: 'CONFIG_SPIKE', if_true: files('spike.c')) riscv_ss.add(when: 'CONFIG_MICROCHIP_PFSOC', if_true: files('microchip_pfsoc.c')) -- 2.28.0 From: Bin Meng <bin.meng@windriver.com> This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_uart model to hw/char directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-9-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/{riscv => char}/sifive_uart.h | 0 hw/{riscv => char}/sifive_uart.c | 2 +- hw/riscv/sifive_e.c | 2 +- hw/riscv/sifive_u.c | 2 +- hw/char/Kconfig | 3 +++ hw/char/meson.build | 1 + hw/riscv/Kconfig | 2 ++ hw/riscv/meson.build | 1 - 8 files changed, 9 insertions(+), 4 deletions(-) rename include/hw/{riscv => char}/sifive_uart.h (100%) rename hw/{riscv => char}/sifive_uart.c (99%) diff --git a/include/hw/riscv/sifive_uart.h b/include/hw/char/sifive_uart.h similarity index 100% rename from include/hw/riscv/sifive_uart.h rename to include/hw/char/sifive_uart.h diff --git a/hw/riscv/sifive_uart.c b/hw/char/sifive_uart.c similarity index 99% rename from hw/riscv/sifive_uart.c rename to hw/char/sifive_uart.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/sifive_uart.c +++ b/hw/char/sifive_uart.c @@ -XXX,XX +XXX,XX @@ #include "chardev/char-fe.h" #include "hw/hw.h" #include "hw/irq.h" -#include "hw/riscv/sifive_uart.h" +#include "hw/char/sifive_uart.h" /* * Not yet implemented: diff --git a/hw/riscv/sifive_e.c b/hw/riscv/sifive_e.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/sifive_e.c +++ b/hw/riscv/sifive_e.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/unimp.h" #include "target/riscv/cpu.h" #include "hw/riscv/riscv_hart.h" -#include "hw/riscv/sifive_uart.h" #include "hw/riscv/sifive_e.h" #include "hw/riscv/boot.h" +#include "hw/char/sifive_uart.h" #include "hw/intc/sifive_clint.h" #include "hw/intc/sifive_plic.h" #include "hw/misc/sifive_e_prci.h" diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/sifive_u.c +++ b/hw/riscv/sifive_u.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/unimp.h" #include "target/riscv/cpu.h" #include "hw/riscv/riscv_hart.h" -#include "hw/riscv/sifive_uart.h" #include "hw/riscv/sifive_u.h" #include "hw/riscv/boot.h" +#include "hw/char/sifive_uart.h" #include "hw/intc/sifive_clint.h" #include "hw/intc/sifive_plic.h" #include "chardev/char.h" diff --git a/hw/char/Kconfig b/hw/char/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/char/Kconfig +++ b/hw/char/Kconfig @@ -XXX,XX +XXX,XX @@ config AVR_USART config MCHP_PFSOC_MMUART bool + +config SIFIVE_UART + bool diff --git a/hw/char/meson.build b/hw/char/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/char/meson.build +++ b/hw/char/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_EXYNOS4', if_true: files('exynos4210_uart.c')) softmmu_ss.add(when: 'CONFIG_OMAP', if_true: files('omap_uart.c')) softmmu_ss.add(when: 'CONFIG_RASPI', if_true: files('bcm2835_aux.c')) softmmu_ss.add(when: 'CONFIG_RENESAS_SCI', if_true: files('renesas_sci.c')) +softmmu_ss.add(when: 'CONFIG_SIFIVE_UART', if_true: files('sifive_uart.c')) softmmu_ss.add(when: 'CONFIG_SH4', if_true: files('sh_serial.c')) softmmu_ss.add(when: 'CONFIG_STM32F2XX_USART', if_true: files('stm32f2xx_usart.c')) softmmu_ss.add(when: 'CONFIG_MCHP_PFSOC_MMUART', if_true: files('mchp_pfsoc_mmuart.c')) diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/Kconfig +++ b/hw/riscv/Kconfig @@ -XXX,XX +XXX,XX @@ config SIFIVE_E select SIFIVE_CLINT select SIFIVE_GPIO select SIFIVE_PLIC + select SIFIVE_UART select SIFIVE_E_PRCI select UNIMP @@ -XXX,XX +XXX,XX @@ config SIFIVE_U select SIFIVE_GPIO select SIFIVE_PDMA select SIFIVE_PLIC + select SIFIVE_UART select SIFIVE_U_OTP select SIFIVE_U_PRCI select UNIMP diff --git a/hw/riscv/meson.build b/hw/riscv/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/meson.build +++ b/hw/riscv/meson.build @@ -XXX,XX +XXX,XX @@ riscv_ss.add(when: 'CONFIG_HART', if_true: files('riscv_hart.c')) riscv_ss.add(when: 'CONFIG_OPENTITAN', if_true: files('opentitan.c')) riscv_ss.add(when: 'CONFIG_RISCV_VIRT', if_true: files('virt.c')) riscv_ss.add(when: 'CONFIG_SIFIVE', if_true: files('sifive_test.c')) -riscv_ss.add(when: 'CONFIG_SIFIVE', if_true: files('sifive_uart.c')) riscv_ss.add(when: 'CONFIG_SIFIVE_E', if_true: files('sifive_e.c')) riscv_ss.add(when: 'CONFIG_SIFIVE_U', if_true: files('sifive_u.c')) riscv_ss.add(when: 'CONFIG_SPIKE', if_true: files('spike.c')) -- 2.28.0 From: Bin Meng <bin.meng@windriver.com> This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_test model to hw/misc directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-10-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/{riscv => misc}/sifive_test.h | 0 hw/{riscv => misc}/sifive_test.c | 2 +- hw/riscv/virt.c | 2 +- hw/misc/Kconfig | 3 +++ hw/misc/meson.build | 1 + hw/riscv/Kconfig | 1 + hw/riscv/meson.build | 1 - 7 files changed, 7 insertions(+), 3 deletions(-) rename include/hw/{riscv => misc}/sifive_test.h (100%) rename hw/{riscv => misc}/sifive_test.c (98%) diff --git a/include/hw/riscv/sifive_test.h b/include/hw/misc/sifive_test.h similarity index 100% rename from include/hw/riscv/sifive_test.h rename to include/hw/misc/sifive_test.h diff --git a/hw/riscv/sifive_test.c b/hw/misc/sifive_test.c similarity index 98% rename from hw/riscv/sifive_test.c rename to hw/misc/sifive_test.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/sifive_test.c +++ b/hw/misc/sifive_test.c @@ -XXX,XX +XXX,XX @@ #include "qemu/module.h" #include "sysemu/runstate.h" #include "hw/hw.h" -#include "hw/riscv/sifive_test.h" +#include "hw/misc/sifive_test.h" static uint64_t sifive_test_read(void *opaque, hwaddr addr, unsigned int size) { diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ #include "hw/char/serial.h" #include "target/riscv/cpu.h" #include "hw/riscv/riscv_hart.h" -#include "hw/riscv/sifive_test.h" #include "hw/riscv/virt.h" #include "hw/riscv/boot.h" #include "hw/riscv/numa.h" #include "hw/intc/sifive_clint.h" #include "hw/intc/sifive_plic.h" +#include "hw/misc/sifive_test.h" #include "chardev/char.h" #include "sysemu/arch_init.h" #include "sysemu/device_tree.h" diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -XXX,XX +XXX,XX @@ config MAC_VIA config AVR_POWER bool +config SIFIVE_TEST + bool + config SIFIVE_E_PRCI bool diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_ARM11SCU', if_true: files('arm11scu.c')) softmmu_ss.add(when: 'CONFIG_MOS6522', if_true: files('mos6522.c')) # RISC-V devices +softmmu_ss.add(when: 'CONFIG_SIFIVE_TEST', if_true: files('sifive_test.c')) softmmu_ss.add(when: 'CONFIG_SIFIVE_E_PRCI', if_true: files('sifive_e_prci.c')) softmmu_ss.add(when: 'CONFIG_SIFIVE_U_OTP', if_true: files('sifive_u_otp.c')) softmmu_ss.add(when: 'CONFIG_SIFIVE_U_PRCI', if_true: files('sifive_u_prci.c')) diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/Kconfig +++ b/hw/riscv/Kconfig @@ -XXX,XX +XXX,XX @@ config RISCV_VIRT select SIFIVE select SIFIVE_CLINT select SIFIVE_PLIC + select SIFIVE_TEST config MICROCHIP_PFSOC bool diff --git a/hw/riscv/meson.build b/hw/riscv/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/meson.build +++ b/hw/riscv/meson.build @@ -XXX,XX +XXX,XX @@ riscv_ss.add(files('numa.c')) riscv_ss.add(when: 'CONFIG_HART', if_true: files('riscv_hart.c')) riscv_ss.add(when: 'CONFIG_OPENTITAN', if_true: files('opentitan.c')) riscv_ss.add(when: 'CONFIG_RISCV_VIRT', if_true: files('virt.c')) -riscv_ss.add(when: 'CONFIG_SIFIVE', if_true: files('sifive_test.c')) riscv_ss.add(when: 'CONFIG_SIFIVE_E', if_true: files('sifive_e.c')) riscv_ss.add(when: 'CONFIG_SIFIVE_U', if_true: files('sifive_u.c')) riscv_ss.add(when: 'CONFIG_SPIKE', if_true: files('spike.c')) -- 2.28.0 From: Bin Meng <bin.meng@windriver.com> Every RISC-V machine needs riscv_hart hence there is no need to have a dedicated Kconfig option for it. Drop the Kconfig option and always build riscv_hart.c. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-11-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/Kconfig | 9 --------- hw/riscv/meson.build | 2 +- 2 files changed, 1 insertion(+), 10 deletions(-) diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/Kconfig +++ b/hw/riscv/Kconfig @@ -XXX,XX +XXX,XX @@ -config HART - bool - config IBEX bool @@ -XXX,XX +XXX,XX @@ config SIFIVE config SIFIVE_E bool - select HART select SIFIVE select SIFIVE_CLINT select SIFIVE_GPIO @@ -XXX,XX +XXX,XX @@ config SIFIVE_E config SIFIVE_U bool select CADENCE - select HART select SIFIVE select SIFIVE_CLINT select SIFIVE_GPIO @@ -XXX,XX +XXX,XX @@ config SIFIVE_U config SPIKE bool - select HART select HTIF select SIFIVE select SIFIVE_CLINT @@ -XXX,XX +XXX,XX @@ config SPIKE config OPENTITAN bool select IBEX - select HART select UNIMP config RISCV_VIRT @@ -XXX,XX +XXX,XX @@ config RISCV_VIRT imply PCI_DEVICES imply TEST_DEVICES select PCI - select HART select SERIAL select GOLDFISH_RTC select VIRTIO_MMIO @@ -XXX,XX +XXX,XX @@ config RISCV_VIRT config MICROCHIP_PFSOC bool - select HART select SIFIVE select SIFIVE_CLINT select UNIMP diff --git a/hw/riscv/meson.build b/hw/riscv/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/meson.build +++ b/hw/riscv/meson.build @@ -XXX,XX +XXX,XX @@ riscv_ss = ss.source_set() riscv_ss.add(files('boot.c'), fdt) riscv_ss.add(files('numa.c')) -riscv_ss.add(when: 'CONFIG_HART', if_true: files('riscv_hart.c')) +riscv_ss.add(files('riscv_hart.c')) riscv_ss.add(when: 'CONFIG_OPENTITAN', if_true: files('opentitan.c')) riscv_ss.add(when: 'CONFIG_RISCV_VIRT', if_true: files('virt.c')) riscv_ss.add(when: 'CONFIG_SIFIVE_E', if_true: files('sifive_e.c')) -- 2.28.0 From: Bin Meng <bin.meng@windriver.com> The name SIFIVE is too vague to convey the required component of MSI_NONBROKEN. Let's drop the option, and select MSI_NONBROKEN in each machine instead. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-12-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/Kconfig | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/Kconfig +++ b/hw/riscv/Kconfig @@ -XXX,XX +XXX,XX @@ config IBEX bool -config SIFIVE - bool - select MSI_NONBROKEN - config SIFIVE_E bool - select SIFIVE + select MSI_NONBROKEN select SIFIVE_CLINT select SIFIVE_GPIO select SIFIVE_PLIC @@ -XXX,XX +XXX,XX @@ config SIFIVE_E config SIFIVE_U bool select CADENCE - select SIFIVE + select MSI_NONBROKEN select SIFIVE_CLINT select SIFIVE_GPIO select SIFIVE_PDMA @@ -XXX,XX +XXX,XX @@ config SIFIVE_U config SPIKE bool select HTIF - select SIFIVE + select MSI_NONBROKEN select SIFIVE_CLINT select SIFIVE_PLIC @@ -XXX,XX +XXX,XX @@ config RISCV_VIRT bool imply PCI_DEVICES imply TEST_DEVICES + select MSI_NONBROKEN select PCI select SERIAL select GOLDFISH_RTC select VIRTIO_MMIO select PCI_EXPRESS_GENERIC_BRIDGE select PFLASH_CFI01 - select SIFIVE select SIFIVE_CLINT select SIFIVE_PLIC select SIFIVE_TEST config MICROCHIP_PFSOC bool - select SIFIVE + select MSI_NONBROKEN select SIFIVE_CLINT select UNIMP select MCHP_PFSOC_MMUART -- 2.28.0 From: Bin Meng <bin.meng@windriver.com> At present the Kconfig file is in disorder. Let's sort the options. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-13-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/Kconfig | 58 ++++++++++++++++++++++++------------------------ 1 file changed, 29 insertions(+), 29 deletions(-) diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/Kconfig +++ b/hw/riscv/Kconfig @@ -XXX,XX +XXX,XX @@ config IBEX bool -config SIFIVE_E - bool - select MSI_NONBROKEN - select SIFIVE_CLINT - select SIFIVE_GPIO - select SIFIVE_PLIC - select SIFIVE_UART - select SIFIVE_E_PRCI - select UNIMP - -config SIFIVE_U +config MICROCHIP_PFSOC bool - select CADENCE + select CADENCE_SDHCI + select MCHP_PFSOC_MMUART select MSI_NONBROKEN select SIFIVE_CLINT - select SIFIVE_GPIO select SIFIVE_PDMA select SIFIVE_PLIC - select SIFIVE_UART - select SIFIVE_U_OTP - select SIFIVE_U_PRCI select UNIMP -config SPIKE - bool - select HTIF - select MSI_NONBROKEN - select SIFIVE_CLINT - select SIFIVE_PLIC - config OPENTITAN bool select IBEX @@ -XXX,XX +XXX,XX @@ config RISCV_VIRT bool imply PCI_DEVICES imply TEST_DEVICES + select GOLDFISH_RTC select MSI_NONBROKEN select PCI - select SERIAL - select GOLDFISH_RTC - select VIRTIO_MMIO select PCI_EXPRESS_GENERIC_BRIDGE select PFLASH_CFI01 + select SERIAL select SIFIVE_CLINT select SIFIVE_PLIC select SIFIVE_TEST + select VIRTIO_MMIO -config MICROCHIP_PFSOC +config SIFIVE_E bool select MSI_NONBROKEN select SIFIVE_CLINT + select SIFIVE_GPIO + select SIFIVE_PLIC + select SIFIVE_UART + select SIFIVE_E_PRCI select UNIMP - select MCHP_PFSOC_MMUART + +config SIFIVE_U + bool + select CADENCE + select MSI_NONBROKEN + select SIFIVE_CLINT + select SIFIVE_GPIO select SIFIVE_PDMA select SIFIVE_PLIC - select CADENCE_SDHCI + select SIFIVE_UART + select SIFIVE_U_OTP + select SIFIVE_U_PRCI + select UNIMP + +config SPIKE + bool + select HTIF + select MSI_NONBROKEN + select SIFIVE_CLINT + select SIFIVE_PLIC -- 2.28.0 From: Alistair Francis <alistair.francis@wdc.com> The following changes since commit f5a2438405d4ae8b62de7c9b39fac0b2155ee544: Merge tag 'pull-qapi-2026-05-21' of https://repo.or.cz/qemu/armbru into staging (2026-05-21 09:00:22 -0400) are available in the Git repository at: https://github.com/alistair23/qemu.git tags/pull-riscv-to-apply-20260522 for you to fetch changes up to b7d87fb10d53a918e9c4a3dfe1fb06ce42c52526: hw/riscv: riscv-iommu: Re-process command queue after clearing CMD_ILL (2026-05-22 09:59:21 +1000) ---------------------------------------------------------------- RISC-V PR for 11.1. * Remove spike as default machine * Deprecate the shakti_c machine * Set MISA.[C|X] based on the selected extensions * Update Maintainers for OpenSBI Firmware * Update OpenSBI to v1.8.1 * Avoid RISCVCPU copy in PMU FDT setup * A collection of specification compliance improvements * Fix Svnapot 64KB pages * Handle source overlap of vector widening reduction instructions * Check interrupt in SiFive UART after txctrl register is written * Fix medeleg[11] read-only zero bit for M-mode ECALL * Fix tail handling for vmv.s.x and vfmv.s.f * Update the local AIA interrupt mask * Add KVM support for Zicbop and BFloat16 extensions * Fix the IOMMU FSC SV32 capability check * Avoid caching PCI device IDs in the IOMMU * Implement Microchip mpfs ioscb PLLs and sysreg clock dividers * Remove the internal CPU riscv_cpu_* arrays * Fix IOCOUNTINH.CY toggle detection * Fix the read of pmpaddr(0-63) CSRs * Make hpmcounterh return the upper 32-bits * Minor fixes and enhancements of RISC-V AIA devices * Re-process IOMMU command queue after clearing CMD_ILL ---------------------------------------------------------------- Abhigyan Kumar (1): target/riscv: Fix medeleg[11] read-only zero bit for M-mode ECALL Alistair Francis (4): target/riscv: Remove spike as default machine target/riscv: Deprecate the shakti_c machine MAINTAINERS: Maintain OpenSBI Firmware target/riscv: Update the local interrupt mask Andrew Jones (1): hw/riscv/riscv-iommu: Fix Svnapot 64KB pages Anton Blanchard (1): target/riscv: rvv: Handle source overlap of vector widening reduction instructions Chengbo Gao (1): hw/riscv/riscv-iommu: Avoid caching PCI device IDs Daniel Henrique Barboza (16): roms/opensbi: Update to v1.8.1 target/riscv/cpu.c: add xlrbr isa_edata_arr[] entry target/riscv/cpu.c: fix smctr/ssctr isa_edata_arr[] order target/riscv: make riscv-qmp-cmds use isa_data_arr[] target/riscv/tcg: treat all exts equally in cpu_disable_priv_spec_isa_exts target/riscv/tcg: use only isa_edata_arr[] in cpu_cfg_ext_get_name() target/riscv/cpu.c: remove riscv_cpu_enable_named_feat() target/riscv: remove riscv_cpu_named_features[] target/riscv/tcg: use isa_edata_arr[] in riscv_cpu_update_misa_x() target/riscv/kvm: use isa_edata_arr[] for unavailable props target/riscv/tcg: use isa_edata_arr[] to enable max exts target/riscv/tcg: use cfg_offset as cpu_set_multi_ext cb opaque target/riscv: do not set defaults in cpu prop callback target/riscv/tcg: use isa_edata_arr[] to create user props target/riscv/cpu: remove riscv_cpu_* arrays target/riscv/csr.c: fix read of pmpaddr(0-63) CSRs Fangyu Yu (1): hw/riscv/riscv-iommu: Fix IOCOUNTINH.CY toggle detection Frank Chang (3): target/riscv: Update MISA.C for Zc* extensions target/riscv: Update MISA.X for non-standard extensions hw/char: Check interrupt after txctrl register is written Guenter Roeck (1): hw: misc: Implement Microchip mpfs ioscb PLLs and sysreg clock dividers Jay Chang (1): hw/riscv: riscv-iommu: Re-process command queue after clearing CMD_ILL Jim Shu (4): hw/intc: riscv_aplic: Fix level trigger IRQ in direct delivery mode hw/intc: riscv_aplic: Add reset API to APLIC hw/intc: riscv_imsic: Add reset API to IMSIC hw/intc: riscv_aplic: add trace events of APLIC read/write function Mohamed Ayman (1): riscv: virt: avoid RISCVCPU copy in PMU FDT setup Portia Stephens (1): target/riscv: Make hpmcounterh return the upper 32-bits Zishun Yi (9): target/riscv: Allow mseccfg access based on ext_zicfilp target/riscv: add Zvknha as an implied extension for Zvknhb target/riscv: Remove unconditional MENVCFG_CDE from mask target/riscv: Fix missing CDE check for scountinhibit target/riscv/pmp: Fix integer overflow in TOR and NA4 address computation target/riscv: Add mseccfg to VMStateDescription target/riscv: clear mseccfg on reset for all dependent extensions hw/riscv/riscv-iommu: fix FSC SV32 capability check hw/riscv/virt-acpi-build: Fix off-by-one error in RIMT ID mapping Zongmin Zhou (2): target/riscv/kvm: add KVM support for Zicbop extension target/riscv/kvm: Add BFloat16 extensions support chen.zhongyao@zte.com.cn (1): target/riscv: Fix tail handling for vmv.s.x and vfmv.s.f MAINTAINERS | 2 + docs/about/deprecated.rst | 21 +- docs/about/removed-features.rst | 14 ++ include/hw/misc/mchp_pfsoc_ioscb.h | 2 + target/riscv/cpu.h | 13 +- target/riscv/helper.h | 4 + hw/char/sifive_uart.c | 1 + hw/intc/riscv_aplic.c | 116 ++++++--- hw/intc/riscv_imsic.c | 19 ++ hw/misc/mchp_pfsoc_ioscb.c | 47 +++- hw/misc/mchp_pfsoc_sysreg.c | 13 + hw/riscv/riscv-iommu-hpm.c | 3 +- hw/riscv/riscv-iommu.c | 96 ++++++-- hw/riscv/shakti_c.c | 1 + hw/riscv/spike.c | 1 - hw/riscv/virt-acpi-build.c | 3 +- hw/riscv/virt.c | 4 +- target/riscv/cpu.c | 327 +++++++++---------------- target/riscv/csr.c | 36 ++- target/riscv/kvm/kvm-cpu.c | 62 +++-- target/riscv/machine.c | 20 ++ target/riscv/pmp.c | 4 +- target/riscv/riscv-qmp-cmds.c | 30 +-- target/riscv/tcg/tcg-cpu.c | 192 +++++++-------- target/riscv/vector_helper.c | 18 ++ target/riscv/insn_trans/trans_rvv.c.inc | 45 ++-- hw/intc/trace-events | 4 + pc-bios/opensbi-riscv32-generic-fw_dynamic.bin | Bin 268752 -> 270384 bytes pc-bios/opensbi-riscv64-generic-fw_dynamic.bin | Bin 273048 -> 275928 bytes roms/opensbi | 2 +- 30 files changed, 613 insertions(+), 487 deletions(-) From: Alistair Francis <alistair.francis@wdc.com> In QEMU 10.0 we deprecated the default spike machine, let's finally remove spike as the default and require users to specify the machine. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Chao Liu <chao.liu.zevorn@gmail.com> Message-ID: <20260430052218.771358-2-alistair.francis@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- docs/about/deprecated.rst | 18 ------------------ docs/about/removed-features.rst | 14 ++++++++++++++ hw/riscv/spike.c | 1 - 3 files changed, 14 insertions(+), 19 deletions(-) diff --git a/docs/about/deprecated.rst b/docs/about/deprecated.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/about/deprecated.rst +++ b/docs/about/deprecated.rst @@ -XXX,XX +XXX,XX @@ better reflects the way this property affects all random data within the device tree blob, not just the ``kaslr-seed`` node. -RISC-V default machine option (since 10.0) -'''''''''''''''''''''''''''''''''''''''''' - -RISC-V defines ``spike`` as the default machine if no machine option is -given in the command line. This happens because ``spike`` is the first -RISC-V machine implemented in QEMU and setting it as default was -convenient at that time. Now we have 7 riscv64 and 6 riscv32 machines -and having ``spike`` as a default is no longer justified. This default -will also promote situations where users think they're running ``virt`` -(the most used RISC-V machine type in 10.0) when in fact they're -running ``spike``. - -Removing the default machine option forces users to always set the machine -they want to use and avoids confusion. Existing users of the ``spike`` -machine must ensure that they're setting the ``spike`` machine in the -command line (``-M spike``). - - Backend options --------------- diff --git a/docs/about/removed-features.rst b/docs/about/removed-features.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/about/removed-features.rst +++ b/docs/about/removed-features.rst @@ -XXX,XX +XXX,XX @@ firmware is available to boot it. It can be replaced by the ``ast2700fc``, another multi-SoC machine based on the newer AST2700 SoCs which are excepted to receive better support in the future. +RISC-V default machine (removed in 11.1) +'''''''''''''''''''''''''''''''''''''''' + +RISC-V used to define ``spike`` as the default machine if no machine option +was given via the command line. This happend because ``spike`` was the first +RISC-V machine implemented in QEMU and setting it as default was +convenient at that time. Now we have 7 riscv64 and 6 riscv32 machines +and having ``spike`` as a default is no longer justified. + +The default machine option has been removed, forcing users to always set the +machine they want to use to avoid confusion. Existing users of the ``spike`` +machine must ensure that they're setting the ``spike`` machine in the +command line (``-M spike``). + linux-user mode CPUs -------------------- diff --git a/hw/riscv/spike.c b/hw/riscv/spike.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/spike.c +++ b/hw/riscv/spike.c @@ -XXX,XX +XXX,XX @@ static void spike_machine_class_init(ObjectClass *oc, const void *data) mc->desc = "RISC-V Spike board"; mc->init = spike_board_init; mc->max_cpus = SPIKE_CPUS_MAX; - mc->is_default = true; mc->default_cpu_type = TYPE_RISCV_CPU_BASE; mc->possible_cpu_arch_ids = riscv_numa_possible_cpu_arch_ids; mc->cpu_index_to_instance_props = riscv_numa_cpu_index_to_props; -- 2.53.0 From: Alistair Francis <alistair.francis@wdc.com> The RISC-V shakti_c machine hasn't had meaningful contributions since 2021 and is currently unmaintained. The machine is scheduled to be removed as it appears to have no users. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Chao Liu <chao.liu.zevorn@gmail.com> Message-ID: <20260430052218.771358-3-alistair.francis@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- docs/about/deprecated.rst | 7 +++++++ hw/riscv/shakti_c.c | 1 + 2 files changed, 8 insertions(+) diff --git a/docs/about/deprecated.rst b/docs/about/deprecated.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/about/deprecated.rst +++ b/docs/about/deprecated.rst @@ -XXX,XX +XXX,XX @@ deprecated; use the new name ``dtb-randomness`` instead. The new name better reflects the way this property affects all random data within the device tree blob, not just the ``kaslr-seed`` node. +RISC-V Shakti machine (since 11.1) +'''''''''''''''''''''''''''''''''' + +The RISC-V ``shakti_c`` machine hasn't had meaningful contributions since 2021 +and is currently unmaintained. The machine is scheduled to be removed as it +appears to have no users. + Backend options --------------- diff --git a/hw/riscv/shakti_c.c b/hw/riscv/shakti_c.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/shakti_c.c +++ b/hw/riscv/shakti_c.c @@ -XXX,XX +XXX,XX @@ static void shakti_c_machine_class_init(ObjectClass *klass, const void *data) mc->init = shakti_c_machine_state_init; mc->default_cpu_type = TYPE_RISCV_CPU_SHAKTI_C; mc->valid_cpu_types = valid_cpu_types; + mc->deprecation_reason = "Currently unmaintained with no known users"; mc->default_ram_id = "riscv.shakti.c.ram"; } -- 2.53.0 From: Frank Chang <frank.chang@sifive.com> MISA.C is set if the following extensions are selected: * Zca and not F. * Zca, Zcf and F (but not D) is specified (RV32 only). * Zca, Zcf and Zcd if D is specified (RV32 only). * Zca, Zcd if D is specified (RV64 only). Therefore, MISA.C must be set according to the Zc* extension rules. Warn the user if RVC is explicitly disabled but MISA.C is required by the rules above. Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Max Chou <max.chou@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260424050509.3935180-2-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 39 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_enable_implied_rules(RISCVCPU *cpu) } } +/* + * MISA.C is set if the following extensions are selected: + * - Zca and not F. + * - Zca, Zcf and F (but not D) is specified on RV32. + * - Zca, Zcf and Zcd if D is specified on RV32. + * - Zca, Zcd if D is specified on RV64. + */ +static void riscv_cpu_update_misa_c(RISCVCPU *cpu) +{ + CPURISCVState *env = &cpu->env; + bool set_misa_c = false; + + if (riscv_has_ext(env, RVC)) { + return; + } + + if (cpu->cfg.ext_zca && !riscv_has_ext(env, RVF)) { + set_misa_c = true; + } else if (riscv_cpu_mxl(env) == MXL_RV32 && + cpu->cfg.ext_zca && cpu->cfg.ext_zcf && + (riscv_has_ext(env, RVD) ? cpu->cfg.ext_zcd : + riscv_has_ext(env, RVF))) { + set_misa_c = true; + } else if (riscv_cpu_mxl(env) == MXL_RV64 && + cpu->cfg.ext_zca && cpu->cfg.ext_zcd) { + set_misa_c = true; + } + + if (set_misa_c) { + if (cpu_misa_ext_is_user_set(RVC)) { + warn_report("RVC mandated by Zca/Zcf/Zcd extensions"); + return; + } + + riscv_cpu_set_misa_ext(env, env->misa_ext | RVC); + } +} + void riscv_tcg_cpu_finalize_features(RISCVCPU *cpu, Error **errp) { CPURISCVState *env = &cpu->env; @@ -XXX,XX +XXX,XX @@ void riscv_tcg_cpu_finalize_features(RISCVCPU *cpu, Error **errp) riscv_cpu_init_implied_exts_rules(); riscv_cpu_enable_implied_rules(cpu); + riscv_cpu_update_misa_c(cpu); riscv_cpu_validate_misa_priv(env, &local_err); if (local_err != NULL) { -- 2.53.0 From: Frank Chang <frank.chang@sifive.com> MISA.X is set if there are any non-standard extensions. We should set MISA.X when any of the vendor extensions is enabled. Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Max Chou <max.chou@sifive.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260424050509.3935180-3-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 1 + target/riscv/tcg/tcg-cpu.c | 15 +++++++++++++++ 2 files changed, 16 insertions(+) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState CPURISCVState; #define RVH RV('H') #define RVG RV('G') #define RVB RV('B') +#define RVX RV('X') extern const uint32_t misa_bits[]; const char *riscv_get_misa_ext_name(uint32_t bit); diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_update_misa_c(RISCVCPU *cpu) } } +/* MISA.X is set when any of the non-standard extensions is enabled. */ +static void riscv_cpu_update_misa_x(RISCVCPU *cpu) +{ + CPURISCVState *env = &cpu->env; + const RISCVCPUMultiExtConfig *arr = riscv_cpu_vendor_exts; + + for (int i = 0; arr[i].name != NULL; i++) { + if (isa_ext_is_enabled(cpu, arr[i].offset)) { + riscv_cpu_set_misa_ext(env, env->misa_ext | RVX); + break; + } + } +} + void riscv_tcg_cpu_finalize_features(RISCVCPU *cpu, Error **errp) { CPURISCVState *env = &cpu->env; @@ -XXX,XX +XXX,XX @@ void riscv_tcg_cpu_finalize_features(RISCVCPU *cpu, Error **errp) riscv_cpu_init_implied_exts_rules(); riscv_cpu_enable_implied_rules(cpu); riscv_cpu_update_misa_c(cpu); + riscv_cpu_update_misa_x(cpu); riscv_cpu_validate_misa_priv(env, &local_err); if (local_err != NULL) { -- 2.53.0 From: Alistair Francis <alistair.francis@wdc.com> Mark the OpenSBI Firmware as maintained by me (Alistair Francis) and add Daniel Henrique Barboza as a reviewer. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20260506234243.1873782-1-alistair.francis@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- MAINTAINERS | 2 ++ 1 file changed, 2 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ S: Supported F: hw/i386/amd_iommu* OpenSBI Firmware +M: Alistair Francis <Alistair.Francis@wdc.com> +R: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> L: qemu-riscv@nongnu.org S: Supported F: pc-bios/opensbi-* -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Update OpenSBI and the pre-built opensbi32 and opensbi64 images to version 1.8.1. We're going for the intermediate/bug fix release 1.8.1 directly due to a PMP related fix that was impacting QEMU profile CPUs. Changelog for v1.8.1: * Typo fix in comments of sbi_hartindex_to_hartid() * Fix hart protection abstraction for platforms without PMP Changelog for v1.8 includes, among other things: - IPI device ratings - SiFive CLINT v2 support - SiFive PL2 cache controller driver - SiFive Extensible Cache (EC) driver - SiFive TMC0 based HSM driver - SiFive SMC0 based system suspend driver - MPXY RPMI mailbox driver for voltage service group - MPXY RPMI mailbox driver for device power service group - MPXY RPMI mailbox driver for performance service group Check out the full release log at [1] for more info. [1] https://github.com/riscv-software-src/opensbi/releases/tag/v1.8 Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260108160825.171794-1-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- .../opensbi-riscv32-generic-fw_dynamic.bin | Bin 268752 -> 270384 bytes .../opensbi-riscv64-generic-fw_dynamic.bin | Bin 273048 -> 275928 bytes roms/opensbi | 2 +- 3 files changed, 1 insertion(+), 1 deletion(-) diff --git a/pc-bios/opensbi-riscv32-generic-fw_dynamic.bin b/pc-bios/opensbi-riscv32-generic-fw_dynamic.bin index XXXXXXX..XXXXXXX 100644 Binary files a/pc-bios/opensbi-riscv32-generic-fw_dynamic.bin and b/pc-bios/opensbi-riscv32-generic-fw_dynamic.bin differ diff --git a/pc-bios/opensbi-riscv64-generic-fw_dynamic.bin b/pc-bios/opensbi-riscv64-generic-fw_dynamic.bin index XXXXXXX..XXXXXXX 100644 Binary files a/pc-bios/opensbi-riscv64-generic-fw_dynamic.bin and b/pc-bios/opensbi-riscv64-generic-fw_dynamic.bin differ diff --git a/roms/opensbi b/roms/opensbi index XXXXXXX..XXXXXXX 160000 --- a/roms/opensbi +++ b/roms/opensbi @@ -1 +1 @@ -Subproject commit a32a91069119e7a5aa31e6bc51d5e00860be3d80 +Subproject commit 74434f255873d74e56cc50aa762d1caf24c099f8 -- 2.53.0 From: Mohamed Ayman <mohamedaymanworkspace@gmail.com> Use a pointer to the hart instead of copying RISCVCPU when passing pmu_avail_ctrs to riscv_pmu_generate_fdt_node(). Signed-off-by: Mohamed Ayman <mohamedaymanworkspace@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260503180252.1122776-1-mohamedaymanworkspace@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt_pmu(RISCVVirtState *s) { g_autofree char *pmu_name = g_strdup_printf("/pmu"); MachineState *ms = MACHINE(s); - RISCVCPU hart = s->soc[0].harts[0]; + RISCVCPU *hart = &s->soc[0].harts[0]; qemu_fdt_add_subnode(ms->fdt, pmu_name); qemu_fdt_setprop_string(ms->fdt, pmu_name, "compatible", "riscv,pmu"); - riscv_pmu_generate_fdt_node(ms->fdt, hart.pmu_avail_ctrs, pmu_name); + riscv_pmu_generate_fdt_node(ms->fdt, hart->pmu_avail_ctrs, pmu_name); } static void create_fdt_sockets(RISCVVirtState *s, -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> The Zicfilp extension adds the MLPE field to the mseccfg CSR. According to the RISC-V Privileged Specification, mseccfg exists if any extension that adds a field to it is implemented. Currently, the `have_mseccfg()` predicate function checks for Smepmp, Zkr, and Smmpm, but misses Zicfilp. As a result, if a CPU is configured with `zicfilp=true` but without the other extensions, accessing the mseccfg CSR will incorrectly raise an illegal instruction exception. This patch adds the missing check for `ext_zicfilp` to ensure the CSR is properly accessible when the Zicfilp extension is enabled. This issue was discovered and reported by SpecHunter, an AI-driven architecture specification analysis tool. Link: https://github.com/yizishun/rv-isa-sec/blob/master/output/riscv-isa-manual/pr-2561/qemu.txt Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Reviewed-by: Chao Liu <chao.liu.zevorn@gmail.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260511072705.3015986-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException have_mseccfg(CPURISCVState *env, int csrno) if (riscv_cpu_cfg(env)->ext_smmpm) { return RISCV_EXCP_NONE; } + if (riscv_cpu_cfg(env)->ext_zicfilp) { + return RISCV_EXCP_NONE; + } return RISCV_EXCP_ILLEGAL_INST; } -- 2.53.0 From: Andrew Jones <andrew.jones@oss.qualcomm.com> The Svnapot extension encodes a 64KB leaf PTE by setting PTE_N and storing bits [3:0] of the PPN as a NAPOT size indicator. The IOMMU model wasn't checking PTE_N and therefore was using the raw (NAPOT- encoded) PPN directly in the physical address, yielding an address 32 KB above the correct base. Fix both riscv_iommu_spa_fetch() and pdt_memory_read() by mirroring the Svnapot handling already present in target/riscv/cpu_helper.c: napot_bits = ctz64(ppn) + 1 /* 4 for 64KB */ napot_mask = (1 << napot_bits) - 1 /* 0xF */ phys_base = PPN_PHYS(ppn & ~napot_mask) page_offset = addr & (PPN_PHYS(napot_mask) | (TARGET_PAGE_SIZE - 1)) The spec only defines napot_bits == 4 (64KB); any other value is treated as a reserved encoding. This is a fix, rather than new feature support, because the spec says "IOMMU implementations must support the Svnapot standard extension for NAPOT Translation Contiguity." Fixes: 0c54acb8243d ("hw/riscv: add RISC-V IOMMU base emulation") Cc: qemu-stable@nongnu.org Signed-off-by: Andrew Jones <andrew.jones@oss.qualcomm.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Nutty Liu <nutty.liu@hotmail.com> Reviewed-by: Tomasz Jeznach <tjeznach@rivosinc.com> Message-ID: <20260508205129.377032-1-andrew.jones@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu.c | 44 ++++++++++++++++++++++++++++++++++++++---- 1 file changed, 40 insertions(+), 4 deletions(-) diff --git a/hw/riscv/riscv-iommu.c b/hw/riscv/riscv-iommu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.c +++ b/hw/riscv/riscv-iommu.c @@ -XXX,XX +XXX,XX @@ static bool riscv_iommu_msi_check(RISCVIOMMUState *s, RISCVIOMMUContext *ctx, return true; } +/* Returns the NAPOT page mask, or 0 for reserved encodings. */ +static hwaddr riscv_iommu_napot_page_mask(hwaddr ppn, hwaddr addr, hwaddr *out) +{ + int napot_bits = ctz64(ppn) + 1; + hwaddr napot_mask, page_mask; + + /* The spec only defines 64KB (napot_bits == 4) */ + if (napot_bits != 4) { + return 0; + } + + napot_mask = (1ULL << napot_bits) - 1; + page_mask = PPN_PHYS(napot_mask) | (TARGET_PAGE_SIZE - 1); + + *out = PPN_PHYS(ppn & ~napot_mask) | (addr & page_mask); + + return page_mask; +} + /* * RISCV IOMMU Address Translation Lookup - Page Table Walk * @@ -XXX,XX +XXX,XX @@ static int riscv_iommu_spa_fetch(RISCVIOMMUState *s, RISCVIOMMUContext *ctx, } else { /* Leaf PTE, translation completed. */ sc[pass].step = sc[pass].levels; - base = PPN_PHYS(ppn) | (addr & ((1ULL << va_skip) - 1)); - /* Update address mask based on smallest translation granularity */ - iotlb->addr_mask &= (1ULL << va_skip) - 1; + + if (pte & PTE_N) { + hwaddr mask = riscv_iommu_napot_page_mask(ppn, addr, &base); + + if (!mask) { + break; + } + iotlb->addr_mask &= mask; + } else { + base = PPN_PHYS(ppn) | (addr & ((1ULL << va_skip) - 1)); + /* Update address mask based on smallest translation granularity */ + iotlb->addr_mask &= (1ULL << va_skip) - 1; + } + /* Continue with S-Stage translation? */ if (pass && sc[0].step != sc[0].levels) { pass = S_STAGE; @@ -XXX,XX +XXX,XX @@ static MemTxResult pdt_memory_read(RISCVIOMMUState *s, return MEMTX_ACCESS_ERROR; /* Misaligned PPN */ } else { /* Leaf PTE, translation completed. */ - base = PPN_PHYS(ppn) | (addr & ((1ULL << va_skip) - 1)); + if (pte & PTE_N) { + if (!riscv_iommu_napot_page_mask(ppn, addr, &base)) { + return MEMTX_ACCESS_ERROR; + } + } else { + base = PPN_PHYS(ppn) | (addr & ((1ULL << va_skip) - 1)); + } break; } -- 2.53.0 From: Anton Blanchard <antonb@tenstorrent.com> Widening reductions read vs2 as a vector of SEW elements and vs1[0] as a scalar of 2*SEW. The ISA does not allow the same vector register to be read with different EEWs, so they must not overlap. vs1 is read as a scalar from element 0, so it is treated as a single vector register (independent of LMUL) when checking overlap. Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3208 Signed-off-by: Anton Blanchard <antonb@tenstorrent.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260417080328.31918-1-antonb@tenstorrent.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/insn_trans/trans_rvv.c.inc | 1 + 1 file changed, 1 insertion(+) diff --git a/target/riscv/insn_trans/trans_rvv.c.inc b/target/riscv/insn_trans/trans_rvv.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_rvv.c.inc +++ b/target/riscv/insn_trans/trans_rvv.c.inc @@ -XXX,XX +XXX,XX @@ GEN_OPIVV_TRANS(vredxor_vs, reduction_check) static bool reduction_widen_check(DisasContext *s, arg_rmrr *a) { return reduction_check(s, a) && (s->sew < MO_64) && + !is_overlapped(a->rs1, 1, a->rs2, 1 << MAX(s->lmul, 0)) && ((s->sew + 1) <= (s->cfg_ptr->elen >> 4)); } -- 2.53.0 From: Frank Chang <frank.chang@sifive.com> It's possible that the transmit watermark level (txctrl.txcnt) is updated when the user writes to txctrl register, which may decrease the transmit watermark level to less than the number of entries in the transmit FIFO. In such a case, the interrupt should be raised so we need to call sifive_uart_update_irq() to check and update interrupt when txctrl register is written. Otherwise, the interrupt will have to be delayed until next TX FIFO transmission is processed. Suggested-by: Chao Liu <chao.liu.zevorn@gmail.com> Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260513030503.3665414-1-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/char/sifive_uart.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/char/sifive_uart.c b/hw/char/sifive_uart.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/sifive_uart.c +++ b/hw/char/sifive_uart.c @@ -XXX,XX +XXX,XX @@ sifive_uart_write(void *opaque, hwaddr addr, if (SIFIVE_UART_TXEN(s->txctrl) && !fifo8_is_empty(&s->tx_fifo)) { sifive_uart_trigger_tx_fifo(s); } + sifive_uart_update_irq(s); return; case SIFIVE_UART_RXCTRL: s->rxctrl = val64; -- 2.53.0 From: Abhigyan Kumar <314abh@gmail.com> RISC-V Privileged Specification 3.1.8 (Machine Trap Delegation Registers (medeleg and mideleg)) mentions: "For exceptions that cannot occur in less privileged modes, the corresponding medeleg bits should be read-only zero. In particular, medeleg[11] is read-only zero." QEMU incorrectly included RISCV_EXCP_M_ECALL in DELEGABLE_EXCPS. It allowed the 11th bit to be written and read as set. Fixed by removing it from the DELEGABLE_EXCPS mask, adhering to the specification. Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3438 Signed-off-by: Abhigyan Kumar <314abh@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260427060849.749179-2-314abh@gmail.com> [ Changes by AF: - Remove comment ] Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 1 - 1 file changed, 1 deletion(-) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static const uint64_t all_ints = M_MODE_INTERRUPTS | S_MODE_INTERRUPTS | (1ULL << (RISCV_EXCP_U_ECALL)) | \ (1ULL << (RISCV_EXCP_S_ECALL)) | \ (1ULL << (RISCV_EXCP_VS_ECALL)) | \ - (1ULL << (RISCV_EXCP_M_ECALL)) | \ (1ULL << (RISCV_EXCP_INST_PAGE_FAULT)) | \ (1ULL << (RISCV_EXCP_LOAD_PAGE_FAULT)) | \ (1ULL << (RISCV_EXCP_STORE_PAGE_FAULT)) | \ -- 2.53.0 From: "chen.zhongyao@zte.com.cn" <chen.zhongyao@zte.com.cn> The risc-v vector spec defines vmv.s.x and vfmv.s.f as writing element 0 of the destination register while the remaining destination elements follow the current tail policy. When QEMU runs with rvv_ta_all_1s enabled, those elements must therefore become all 1s. QEMU handled both instructions as translation-time special cases that directly wrote vd[0] and skipped the usual tail processing. As a result, vmv.s.x and vfmv.s.f left the remaining destination elements unchanged instead of applying the configured tail policy. Fix this by routing both instructions through a helper that writes vd[0] and then treats the rest of the destination register as tail, reusing the existing agnostic-element fill logic. Signed-off-by: Zhongyao Chen <chen.zhongyao@zte.com.cn> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <202605061005.646A537u037157@mse-fl1.zte.com.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/helper.h | 4 +++ target/riscv/vector_helper.c | 18 ++++++++++ target/riscv/insn_trans/trans_rvv.c.inc | 44 ++++++++----------------- 3 files changed, 36 insertions(+), 30 deletions(-) diff --git a/target/riscv/helper.h b/target/riscv/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/helper.h +++ b/target/riscv/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_4(vmv_v_x_b, void, ptr, i64, env, i32) DEF_HELPER_4(vmv_v_x_h, void, ptr, i64, env, i32) DEF_HELPER_4(vmv_v_x_w, void, ptr, i64, env, i32) DEF_HELPER_4(vmv_v_x_d, void, ptr, i64, env, i32) +DEF_HELPER_4(vset_velem0_b, void, ptr, i64, env, i32) +DEF_HELPER_4(vset_velem0_h, void, ptr, i64, env, i32) +DEF_HELPER_4(vset_velem0_w, void, ptr, i64, env, i32) +DEF_HELPER_4(vset_velem0_d, void, ptr, i64, env, i32) DEF_HELPER_6(vsaddu_vv_b, void, ptr, ptr, ptr, ptr, env, i32) DEF_HELPER_6(vsaddu_vv_h, void, ptr, ptr, ptr, ptr, env, i32) diff --git a/target/riscv/vector_helper.c b/target/riscv/vector_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/vector_helper.c +++ b/target/riscv/vector_helper.c @@ -XXX,XX +XXX,XX @@ GEN_VEXT_VMV_VX(vmv_v_x_h, int16_t, H2) GEN_VEXT_VMV_VX(vmv_v_x_w, int32_t, H4) GEN_VEXT_VMV_VX(vmv_v_x_d, int64_t, H8) +#define GEN_VEXT_SET_VELEM0(NAME, ETYPE, H) \ +void HELPER(NAME)(void *vd, uint64_t s1, CPURISCVState *env, \ + uint32_t desc) \ +{ \ + uint32_t esz = sizeof(ETYPE); \ + uint32_t vlenb = riscv_cpu_cfg(env)->vlenb; \ + uint32_t vta = vext_vta(desc); \ + \ + *((ETYPE *)vd + H(0)) = (ETYPE)s1; \ + /* Treat every element past vd[0] as tail for scalar-to-vector moves. */ \ + vext_set_elems_1s(vd, vta, esz, vlenb); \ +} + +GEN_VEXT_SET_VELEM0(vset_velem0_b, int8_t, H1) +GEN_VEXT_SET_VELEM0(vset_velem0_h, int16_t, H2) +GEN_VEXT_SET_VELEM0(vset_velem0_w, int32_t, H4) +GEN_VEXT_SET_VELEM0(vset_velem0_d, int64_t, H8) + #define GEN_VEXT_VMERGE_VV(NAME, ETYPE, H) \ void HELPER(NAME)(void *vd, void *v0, void *vs1, void *vs2, \ CPURISCVState *env, uint32_t desc) \ diff --git a/target/riscv/insn_trans/trans_rvv.c.inc b/target/riscv/insn_trans/trans_rvv.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/insn_trans/trans_rvv.c.inc +++ b/target/riscv/insn_trans/trans_rvv.c.inc @@ -XXX,XX +XXX,XX @@ static void vec_element_loadi(DisasContext *s, TCGv_i64 dest, load_element(dest, tcg_env, endian_ofs(s, vreg, idx), s->sew, sign); } -/* Integer Scalar Move Instruction */ +typedef void gen_helper_vset_velem0(TCGv_ptr, TCGv_i64, TCGv_env, TCGv_i32); -static void store_element(TCGv_i64 val, TCGv_ptr base, - int ofs, int sew) +static void vec_element_storei_tail(DisasContext *s, int vreg, TCGv_i64 val) { - switch (sew) { - case MO_8: - tcg_gen_st8_i64(val, base, ofs); - break; - case MO_16: - tcg_gen_st16_i64(val, base, ofs); - break; - case MO_32: - tcg_gen_st32_i64(val, base, ofs); - break; - case MO_64: - tcg_gen_st_i64(val, base, ofs); - break; - default: - g_assert_not_reached(); - } -} + static gen_helper_vset_velem0 * const fns[4] = { + gen_helper_vset_velem0_b, gen_helper_vset_velem0_h, + gen_helper_vset_velem0_w, gen_helper_vset_velem0_d, + }; + TCGv_ptr dest = tcg_temp_new_ptr(); + uint32_t data = FIELD_DP32(0, VDATA, VTA, s->vta); + TCGv_i32 desc = tcg_constant_i32(simd_desc(s->cfg_ptr->vlenb, + s->cfg_ptr->vlenb, data)); -/* - * Store vreg[idx] = val. - * The index must be in range of VLMAX. - */ -static void vec_element_storei(DisasContext *s, int vreg, - int idx, TCGv_i64 val) -{ - store_element(val, tcg_env, endian_ofs(s, vreg, idx), s->sew); + tcg_gen_addi_ptr(dest, tcg_env, vreg_ofs(s, vreg)); + fns[s->sew](dest, val, tcg_env, desc); } /* vmv.x.s rd, vs2 # x[rd] = vs2[0] */ @@ -XXX,XX +XXX,XX @@ static bool trans_vmv_s_x(DisasContext *s, arg_vmv_s_x *a) */ s1 = get_gpr(s, a->rs1, EXT_NONE); tcg_gen_ext_tl_i64(t1, s1); - vec_element_storei(s, a->rd, 0, t1); + vec_element_storei_tail(s, a->rd, t1); gen_set_label(over); tcg_gen_movi_tl(cpu_vstart, 0); finalize_rvv_inst(s); @@ -XXX,XX +XXX,XX @@ static bool trans_vfmv_s_f(DisasContext *s, arg_vfmv_s_f *a) t1 = tcg_temp_new_i64(); do_nanbox(s, t1, cpu_fpr[a->rs1]); - vec_element_storei(s, a->rd, 0, t1); + vec_element_storei_tail(s, a->rd, t1); gen_set_label(over); tcg_gen_movi_tl(cpu_vstart, 0); -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> The RISC-V unpriv specification (zvk.adoc) states that "Zvknhb implies Zvknha". This means that enabling Zvknhb should automatically enable Zvknha. Add Zvknha to ZVKNHB_IMPLIED to ensure the dependency is correctly enforced. This issue was discovered and reported by SpecHunter, an AI-driven architecture specification analysis tool. Link:https://github.com/yizishun/rv-isa-sec/blob/master/output/riscv-isa-manual/pr-2635/qemu.txt Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260511051736.2916225-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static RISCVCPUImpliedExtsRule ZVKNG_IMPLIED = { static RISCVCPUImpliedExtsRule ZVKNHB_IMPLIED = { .ext = CPU_CFG_OFFSET(ext_zvknhb), .implied_multi_exts = { - CPU_CFG_OFFSET(ext_zve64x), + CPU_CFG_OFFSET(ext_zve64x), CPU_CFG_OFFSET(ext_zvknha), RISCV_IMPLIED_EXTS_RULE_END }, -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> Currently, the MENVCFG_CDE (Counter Delegation Enable) bit is unconditionally included in the base write mask for CSR_MENVCFG. This make the subsequent conditional check `(cfg->ext_smcdeleg ? MENVCFG_CDE : 0)` completely ineffective, as a bitwise OR cannot clear a bit that is already set. Fix this by removing MENVCFG_CDE from the initial base mask. The bit will now only be writable when explicitly granted by the `ext_smcdeleg` configuration. This issue was discovered and reported by SpecHunter, an AI-driven architecture specification analysis tool. Link: https://github.com/yizishun/rv-isa-sec/blob/master/output/riscv-isa-manual/pr-2601/qemu.txt Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260511040534.2862443-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException write_menvcfg(CPURISCVState *env, int csrno, { const RISCVCPUConfig *cfg = riscv_cpu_cfg(env); uint64_t mask = MENVCFG_FIOM | MENVCFG_CBIE | MENVCFG_CBCFE | - MENVCFG_CBZE | MENVCFG_CDE; + MENVCFG_CBZE; bool stce_changed = false; if (riscv_cpu_mxl(env) == MXL_RV64) { -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> According to the RISC-V smcdeleg specification: "When menvcfg.CDE=0, attempts to access scountinhibit raise an illegal-instruction exception." The current implementation of scountinhibit_pred() only checks the hardware extensions (ext_ssccfg, ext_smcdeleg) and virtualization status, but completely misses the runtime environment configuration check (menvcfg.CDE). This allows S-mode to access scountinhibit even when the M-mode has explicitly disabled counter delegation. This issue was discovered by the SpecHunter tool (https://github.com/yizishun/rv-isa-sec/blob/master/output/riscv-isa-manual/pr-2571/qemu.txt). Fixes: 6247dc2ef70b ("target/riscv: Add counter delegation/configuration support") Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260508174917.371667-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException scountinhibit_pred(CPURISCVState *env, int csrno) return RISCV_EXCP_ILLEGAL_INST; } + if (!get_field(env->menvcfg, MENVCFG_CDE)) { + return RISCV_EXCP_ILLEGAL_INST; + } + if (env->virt_enabled) { return RISCV_EXCP_VIRT_INSTRUCTION_FAULT; } -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> According to the RISC-V Privileged Manual: "The Sv32 page-based virtual-memory scheme described in sv32 supports 34-bit physical addresses for RV32, so the PMP scheme must support addresses wider than XLEN for RV32." However, the current QEMU implementation uses `target_ulong` (which resolves to `uint32_t` on RV32) for PMP address variables. When shifting these addresses left (e.g., `this_addr << 2`), an integer overflow occurs, truncating the high bits of the 34-bit physical address. Fix this issue by changing the types of PMP address variables (`this_addr` and `prev_addr`) to `hwaddr`. This issue was discovered and reported by SpecHunter, an AI-driven architecture specification analysis tool. Link: https://github.com/yizishun/rv-isa-sec/blob/master/output/riscv-isa-manual/pr-2472/qemu.txt Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260511102627.3120140-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/pmp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/riscv/pmp.c b/target/riscv/pmp.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/pmp.c +++ b/target/riscv/pmp.c @@ -XXX,XX +XXX,XX @@ static void pmp_decode_napot(hwaddr a, hwaddr *sa, hwaddr *ea) void pmp_update_rule_addr(CPURISCVState *env, uint32_t pmp_index) { uint8_t this_cfg = env->pmp_state.pmp[pmp_index].cfg_reg; - target_ulong this_addr = env->pmp_state.pmp[pmp_index].addr_reg; - target_ulong prev_addr = 0u; + hwaddr this_addr = env->pmp_state.pmp[pmp_index].addr_reg; + hwaddr prev_addr = 0u; hwaddr sa = 0u; hwaddr ea = 0u; int g = pmp_get_granularity_g(env); -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> Currently, the Machine Security Configuration Register (mseccfg) was missing from the live migration state. This omission causes the register to be reset to zero on the destination host after migration. Fixed by adding vmstate_mseccfg subsection This vulnerability was discovered and reported by SpecHunter, an AI-driven architecture specification analysis tool. Link: https://github.com/yizishun/rv-isa-sec/blob/a22e4459cd026ae970791dfbd9cfe5d110fbd46b/output/riscv-isa-manual/pr-1879/qemu.txt#L121 Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260511124828.3210477-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/machine.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/target/riscv/machine.c b/target/riscv/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/machine.c +++ b/target/riscv/machine.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_sstc = { } }; +static bool mseccfg_needed(void *opaque) +{ + RISCVCPU *cpu = opaque; + + return cpu->cfg.ext_smepmp || cpu->cfg.ext_zkr + || cpu->cfg.ext_smmpm || cpu->cfg.ext_zicfilp; +} + +static const VMStateDescription vmstate_mseccfg = { + .name = "cpu/mseccfg", + .version_id = 1, + .minimum_version_id = 1, + .needed = mseccfg_needed, + .fields = (const VMStateField[]) { + VMSTATE_UINTTL(env.mseccfg, RISCVCPU), + VMSTATE_END_OF_LIST() + } +}; + const VMStateDescription vmstate_riscv_cpu = { .name = "cpu", .version_id = 11, @@ -XXX,XX +XXX,XX @@ const VMStateDescription vmstate_riscv_cpu = { &vmstate_ssp, &vmstate_ctr, &vmstate_sstc, + &vmstate_mseccfg, NULL } }; -- 2.53.0 From: Alistair Francis <alistair.francis@wdc.com> The RISC-V spec describes bits 0-15 as standard fixed interrupts. The AIA spec on the other hand describes bits 0-12 as standard fixed interrupts. This conflict causes issues for us as we don't dynamically determine if AIA is enabled when setting the *delegable_ints consts. This means currently we incorrectly treat the LCOFIP bit as delegable, even if AIA is disabled, which is incorrect (see the issues mentioned below). The AIA spec indicates that implementations can determine which bits of 13-63 in mvien are writable, so let's just make it bits 15-63 to match the main spec. Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3133 Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3134 Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3135 Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3138 Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3140 Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260513051841.1671987-1-alistair.francis@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException write_stimecmph(CPURISCVState *env, int csrno, #define VSTOPI_NUM_SRCS 5 /* - * All core local interrupts except the fixed ones 0:12. This macro is for + * All core local interrupts except the fixed ones 0:15. This macro is for * virtual interrupts logic so please don't change this to avoid messing up * the whole support, For reference see AIA spec: `5.3 Interrupt filtering and * virtual interrupts for supervisor level` and `6.3.2 Virtual interrupts for * VS level`. */ -#define LOCAL_INTERRUPTS (~0x1FFFULL) +#define LOCAL_INTERRUPTS (~0xFFFFULL) static const uint64_t delegable_ints = S_MODE_INTERRUPTS | VS_MODE_INTERRUPTS | MIP_LCOFIP; -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> Currently, the `mseccfg` CSR is only cleared to 0 during reset if the `ext_smepmp` is enabled. However, this register is now shared by several other extensions such as `zkr`, `smmpm`, and `zicfilp`. Fix by clearing `mseccfg` if any dependent extension is present, and adjusting the relevant comments. This vulnerability was discovered and reported by SpecHunter, an AI-driven architecture specification analysis tool. Link: https://github.com/yizishun/rv-isa-sec/blob/master/output/riscv-svvptc/pr-134/qemu.txt Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260512052240.330815-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_reset_hold(Object *obj, ResetType type) /* * Clear mseccfg and unlock all the PMP entries upon reset. - * This is allowed as per the priv and smepmp specifications - * and is needed to clear stale entries across reboots. + * This is required as per the priv, smepmp, and other security + * extension specifications that share this CSR, and is needed + * to clear stale entries across reboots. */ - if (riscv_cpu_cfg(env)->ext_smepmp) { + if (riscv_cpu_cfg(env)->ext_smepmp || + riscv_cpu_cfg(env)->ext_zkr || + riscv_cpu_cfg(env)->ext_smmpm || + riscv_cpu_cfg(env)->ext_zicfilp) { env->mseccfg = 0; } -- 2.53.0 From: Zongmin Zhou <zhouzongmin@kylinos.cn> When the Zicbop extension is available expose it to the KVM guest. Also read and validate cbop_blocksize from the host via KVM interface. Signed-off-by: Zongmin Zhou <zhouzongmin@kylinos.cn> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <9e388aa9984ea9d3d0c85e1630c9195023938952.1778653159.git.zhouzongmin@kylinos.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/kvm/kvm-cpu.c | 34 ++++++++++++++++++++++++++++++++-- 1 file changed, 32 insertions(+), 2 deletions(-) diff --git a/target/riscv/kvm/kvm-cpu.c b/target/riscv/kvm/kvm-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/kvm/kvm-cpu.c +++ b/target/riscv/kvm/kvm-cpu.c @@ -XXX,XX +XXX,XX @@ static void kvm_cpu_csr_set_u64(RISCVCPU *cpu, KVMCPUConfig *csr_cfg, static KVMCPUConfig kvm_multi_ext_cfgs[] = { KVM_EXT_CFG("zicbom", ext_zicbom, KVM_RISCV_ISA_EXT_ZICBOM), + KVM_EXT_CFG("zicbop", ext_zicbop, KVM_RISCV_ISA_EXT_ZICBOP), KVM_EXT_CFG("zicboz", ext_zicboz, KVM_RISCV_ISA_EXT_ZICBOZ), KVM_EXT_CFG("ziccrse", ext_ziccrse, KVM_RISCV_ISA_EXT_ZICCRSE), KVM_EXT_CFG("zicntr", ext_zicntr, KVM_RISCV_ISA_EXT_ZICNTR), @@ -XXX,XX +XXX,XX @@ static KVMCPUConfig kvm_cboz_blocksize = { .kvm_reg_id = KVM_REG_RISCV_CONFIG_REG(zicboz_block_size) }; +static KVMCPUConfig kvm_cbop_blocksize = { + .name = "cbop_blocksize", + .offset = CPU_CFG_OFFSET(cbop_blocksize), + .kvm_reg_id = KVM_REG_RISCV_CONFIG_REG(zicbop_block_size) +}; + static KVMCPUConfig kvm_v_vlenb = { .name = "vlenb", .offset = CPU_CFG_OFFSET(vlenb), @@ -XXX,XX +XXX,XX @@ static void kvm_riscv_init_cfg(RISCVCPU *cpu, KVMScratchCPU *kvmcpu) kvm_riscv_read_cbomz_blksize(cpu, kvmcpu, &kvm_cbom_blocksize); } + if (cpu->cfg.ext_zicbop) { + kvm_riscv_read_cbomz_blksize(cpu, kvmcpu, &kvm_cbop_blocksize); + } + if (cpu->cfg.ext_zicboz) { kvm_riscv_read_cbomz_blksize(cpu, kvmcpu, &kvm_cboz_blocksize); } @@ -XXX,XX +XXX,XX @@ void riscv_kvm_cpu_finalize_features(RISCVCPU *cpu, Error **errp) int ret; /* short-circuit without spinning the scratch CPU */ - if (!cpu->cfg.ext_zicbom && !cpu->cfg.ext_zicboz && - !riscv_has_ext(env, RVV)) { + if (!cpu->cfg.ext_zicbom && !cpu->cfg.ext_zicbop && + !cpu->cfg.ext_zicboz && !riscv_has_ext(env, RVV)) { return; } @@ -XXX,XX +XXX,XX @@ void riscv_kvm_cpu_finalize_features(RISCVCPU *cpu, Error **errp) } } + if (cpu->cfg.ext_zicbop && + riscv_cpu_option_set(kvm_cbop_blocksize.name)) { + + reg.id = KVM_RISCV_REG_ID_ULONG(KVM_REG_RISCV_CONFIG, + kvm_cbop_blocksize.kvm_reg_id); + reg.addr = (uint64_t)&val; + ret = ioctl(kvmcpu.cpufd, KVM_GET_ONE_REG, &reg); + if (ret != 0) { + error_setg_errno(errp, errno, "Unable to read cbop_blocksize"); + return; + } + + if (cpu->cfg.cbop_blocksize != val) { + error_setg(errp, "Unable to set cbop_blocksize to a different " + "value than the host (%lu)", val); + return; + } + } + /* Users are setting vlen, not vlenb */ if (riscv_has_ext(env, RVV) && riscv_cpu_option_set("vlen")) { if (!kvm_v_vlenb.supported) { -- 2.53.0 From: Zongmin Zhou <zhouzongmin@kylinos.cn> Expose the BFloat16 extensions (Zfbfmin, Zvfbfmin, Zvfbfwma) to KVM guests when available in hardware. Signed-off-by: Zongmin Zhou <zhouzongmin@kylinos.cn> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <1258febb0eeb4ee286eb88f70b077a7f1ece507f.1778653159.git.zhouzongmin@kylinos.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/kvm/kvm-cpu.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/target/riscv/kvm/kvm-cpu.c b/target/riscv/kvm/kvm-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/kvm/kvm-cpu.c +++ b/target/riscv/kvm/kvm-cpu.c @@ -XXX,XX +XXX,XX @@ static KVMCPUConfig kvm_multi_ext_cfgs[] = { KVM_EXT_CFG("zacas", ext_zacas, KVM_RISCV_ISA_EXT_ZACAS), KVM_EXT_CFG("zawrs", ext_zawrs, KVM_RISCV_ISA_EXT_ZAWRS), KVM_EXT_CFG("zfa", ext_zfa, KVM_RISCV_ISA_EXT_ZFA), + KVM_EXT_CFG("zfbfmin", ext_zfbfmin, KVM_RISCV_ISA_EXT_ZFBFMIN), KVM_EXT_CFG("zfh", ext_zfh, KVM_RISCV_ISA_EXT_ZFH), KVM_EXT_CFG("zfhmin", ext_zfhmin, KVM_RISCV_ISA_EXT_ZFHMIN), KVM_EXT_CFG("zba", ext_zba, KVM_RISCV_ISA_EXT_ZBA), @@ -XXX,XX +XXX,XX @@ static KVMCPUConfig kvm_multi_ext_cfgs[] = { KVM_EXT_CFG("zvbc", ext_zvbc, KVM_RISCV_ISA_EXT_ZVBC), KVM_EXT_CFG("zvfh", ext_zvfh, KVM_RISCV_ISA_EXT_ZVFH), KVM_EXT_CFG("zvfhmin", ext_zvfhmin, KVM_RISCV_ISA_EXT_ZVFHMIN), + KVM_EXT_CFG("zvfbfmin", ext_zvfbfmin, KVM_RISCV_ISA_EXT_ZVFBFMIN), + KVM_EXT_CFG("zvfbfwma", ext_zvfbfwma, KVM_RISCV_ISA_EXT_ZVFBFWMA), KVM_EXT_CFG("zvkb", ext_zvkb, KVM_RISCV_ISA_EXT_ZVKB), KVM_EXT_CFG("zvkg", ext_zvkg, KVM_RISCV_ISA_EXT_ZVKG), KVM_EXT_CFG("zvkned", ext_zvkned, KVM_RISCV_ISA_EXT_ZVKNED), -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> Fix a mode-to-capability comparison error in riscv_iommu_validate_device_ctx. The code was comparing fsc_mode (a value) against a capability bitmask, making the SV32 support check ineffective. This issue was discovered and reported by SpecHunter, an AI-driven architecture specification analysis tool. Link: https://github.com/yizishun/rv-isa-sec/blob/master/output/riscv-iommu/pr-694/qemu.txt Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260511080904.3049446-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/riscv/riscv-iommu.c b/hw/riscv/riscv-iommu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.c +++ b/hw/riscv/riscv-iommu.c @@ -XXX,XX +XXX,XX @@ static bool riscv_iommu_validate_device_ctx(RISCVIOMMUState *s, } if (ctx->tc & RISCV_IOMMU_DC_TC_SXL) { - if (fsc_mode == RISCV_IOMMU_CAP_SV32 && + if (fsc_mode == RISCV_IOMMU_DC_FSC_IOSATP_MODE_SV32 && !(s->cap & RISCV_IOMMU_CAP_SV32)) { return false; } -- 2.53.0 From: Chengbo Gao <gaochengbo@bosc.ac.cn> PCI bus numbers may still be unassigned when QEMU initializes a PCI device's bus-master address space. For devices behind bridges, pci_bus_num() can return 0 at that point because the guest has not yet programmed the bridge Secondary Bus Number register. The RISC-V IOMMU currently stores a fixed device_id in RISCVIOMMUSpace when the address space is created. If the guest later enumerates the device on a non-zero bus, DMA translation still uses the stale device_id and may look up the wrong device context in the DDT. Store the stable PCIBus pointer and devfn in RISCVIOMMUSpace instead, and compute the device_id from the current bus number when it is needed. This keeps DMA translation and ATS invalidation in sync with guest PCI bus enumeration. Signed-off-by: Chengbo Gao <gaochengbo@bosc.ac.cn> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260514020637.2819308-1-gaochengbo@bosc.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu.c | 40 +++++++++++++++++++++++++--------------- 1 file changed, 25 insertions(+), 15 deletions(-) diff --git a/hw/riscv/riscv-iommu.c b/hw/riscv/riscv-iommu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.c +++ b/hw/riscv/riscv-iommu.c @@ -XXX,XX +XXX,XX @@ struct RISCVIOMMUSpace { IOMMUMemoryRegion iova_mr; /* IOVA memory region for attached device */ AddressSpace iova_as; /* IOVA address space for attached device */ RISCVIOMMUState *iommu; /* Managing IOMMU device state */ - uint32_t devid; /* Requester identifier, AKA device_id */ + PCIBus *bus; /* PCI bus of the requester */ + uint8_t devfn; /* Requester identifier, AKA device_id */ bool notifier; /* IOMMU unmap notifier enabled */ QLIST_ENTRY(RISCVIOMMUSpace) list; }; @@ -XXX,XX +XXX,XX @@ struct RISCVIOMMUEntry { /* IOMMU index for transactions without process_id specified. */ #define RISCV_IOMMU_NOPROCID 0 +static uint32_t riscv_iommu_space_devid(RISCVIOMMUSpace *as) +{ + uint32_t devid = PCI_BUILD_BDF(pci_bus_num(as->bus), as->devfn); + + /* FIXME: PCIe bus remapping for attached endpoints. */ + devid |= as->iommu->bus << 8; + return devid; +} + static uint8_t riscv_iommu_get_icvec_vector(uint32_t icvec, uint32_t vec_type) { switch (vec_type) { @@ -XXX,XX +XXX,XX @@ static void riscv_iommu_ctx_put(RISCVIOMMUState *s, void *ref) } /* Find or allocate address space for a given device */ -static AddressSpace *riscv_iommu_space(RISCVIOMMUState *s, uint32_t devid) +static AddressSpace *riscv_iommu_space(RISCVIOMMUState *s, PCIBus *bus, + int devfn) { RISCVIOMMUSpace *as; - /* FIXME: PCIe bus remapping for attached endpoints. */ - devid |= s->bus << 8; - QLIST_FOREACH(as, &s->spaces, list) { - if (as->devid == devid) { + if (as->bus == bus && as->devfn == devfn) { break; } } @@ -XXX,XX +XXX,XX @@ static AddressSpace *riscv_iommu_space(RISCVIOMMUState *s, uint32_t devid) as = g_new0(RISCVIOMMUSpace, 1); as->iommu = s; - as->devid = devid; + as->bus = bus; + as->devfn = devfn; snprintf(name, sizeof(name), "riscv-iommu-%04x:%02x.%d-iova", - PCI_BUS_NUM(as->devid), PCI_SLOT(as->devid), PCI_FUNC(as->devid)); + pci_bus_num(bus), PCI_SLOT(devfn), PCI_FUNC(devfn)); /* IOVA address space, untranslated addresses */ memory_region_init_iommu(&as->iova_mr, sizeof(as->iova_mr), @@ -XXX,XX +XXX,XX @@ static AddressSpace *riscv_iommu_space(RISCVIOMMUState *s, uint32_t devid) QLIST_INSERT_HEAD(&s->spaces, as, list); - trace_riscv_iommu_new(s->parent_obj.id, PCI_BUS_NUM(as->devid), - PCI_SLOT(as->devid), PCI_FUNC(as->devid)); + trace_riscv_iommu_new(s->parent_obj.id, pci_bus_num(bus), + PCI_SLOT(devfn), PCI_FUNC(devfn)); } return &as->iova_as; } @@ -XXX,XX +XXX,XX @@ static void riscv_iommu_ats(RISCVIOMMUState *s, pid = get_field(cmd->dword0, RISCV_IOMMU_CMD_ATS_PID); QLIST_FOREACH(as, &s->spaces, list) { - if (as->devid == devid) { + if (riscv_iommu_space_devid(as) == devid) { break; } } @@ -XXX,XX +XXX,XX @@ static IOMMUTLBEntry riscv_iommu_memory_region_translate( .addr_mask = ~0ULL, .perm = flag, }; + uint32_t devid = riscv_iommu_space_devid(as); - ctx = riscv_iommu_ctx(as->iommu, as->devid, iommu_idx, &ref); + ctx = riscv_iommu_ctx(as->iommu, devid, iommu_idx, &ref); if (ctx == NULL) { /* Translation disabled or invalid. */ iotlb.addr_mask = 0; @@ -XXX,XX +XXX,XX @@ static IOMMUTLBEntry riscv_iommu_memory_region_translate( } /* Trace all dma translations with original access flags. */ - trace_riscv_iommu_dma(as->iommu->parent_obj.id, PCI_BUS_NUM(as->devid), - PCI_SLOT(as->devid), PCI_FUNC(as->devid), iommu_idx, + trace_riscv_iommu_dma(as->iommu->parent_obj.id, PCI_BUS_NUM(devid), + PCI_SLOT(devid), PCI_FUNC(devid), iommu_idx, IOMMU_FLAG_STR[flag & IOMMU_RW], iotlb.iova, iotlb.translated_addr); @@ -XXX,XX +XXX,XX @@ static AddressSpace *riscv_iommu_find_as(PCIBus *bus, void *opaque, int devfn) /* Find first matching IOMMU */ while (s != NULL && as == NULL) { - as = riscv_iommu_space(s, PCI_BUILD_BDF(pci_bus_num(bus), devfn)); + as = riscv_iommu_space(s, bus, devfn); s = s->iommus.le_next; } -- 2.53.0 From: Guenter Roeck <linux@roeck-us.net> Minimal clock register configuration required to boot Linux without backtraces in the clock code. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260514-reference-overhand-749149e36a88@spud> [ Changes by AF: - Fixup checkpatch errors ] Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- include/hw/misc/mchp_pfsoc_ioscb.h | 2 ++ hw/misc/mchp_pfsoc_ioscb.c | 47 +++++++++++++++++++++++++++++- hw/misc/mchp_pfsoc_sysreg.c | 13 +++++++++ 3 files changed, 61 insertions(+), 1 deletion(-) diff --git a/include/hw/misc/mchp_pfsoc_ioscb.h b/include/hw/misc/mchp_pfsoc_ioscb.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/mchp_pfsoc_ioscb.h +++ b/include/hw/misc/mchp_pfsoc_ioscb.h @@ -XXX,XX +XXX,XX @@ typedef struct MchpPfSoCIoscbState { MemoryRegion mailbox; MemoryRegion cfg; MemoryRegion ccc; + MemoryRegion pll_nw_0; + MemoryRegion pll_nw_1; MemoryRegion pll_mss; MemoryRegion cfm_mss; MemoryRegion pll_ddr; diff --git a/hw/misc/mchp_pfsoc_ioscb.c b/hw/misc/mchp_pfsoc_ioscb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/mchp_pfsoc_ioscb.c +++ b/hw/misc/mchp_pfsoc_ioscb.c @@ -XXX,XX +XXX,XX @@ #define IOSCB_MAILBOX_BASE 0x07020800 #define IOSCB_CFG_BASE 0x07080000 #define IOSCB_CCC_BASE 0x08000000 +#define IOSCB_PLL_NW0_BASE 0x08100000 +#define IOSCB_PLL_NW1_BASE 0x08200000 #define IOSCB_PLL_MSS_BASE 0x0E001000 #define IOSCB_CFM_MSS_BASE 0x0E002000 #define IOSCB_PLL_DDR_BASE 0x0E010000 @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps mchp_pfsoc_dummy_ops = { /* All PLL modules in IOSCB have the same register layout */ #define PLL_CTRL 0x04 +#define PLL_REF_FB 0x08 +#define PLL_DIV_0_1 0x10 +#define PLL_DIV_2_3 0x14 +#define PLL_CTRL2 0x18 +#define PLL_CAL 0x1c +#define PLL_PHADJ 0x20 +#define SSCG_REG_0 0x24 +#define SSCG_REG_1 0x28 +#define SSCG_REG_2 0x2c +#define SSCG_REG_3 0x30 static uint64_t mchp_pfsoc_pll_read(void *opaque, hwaddr offset, unsigned size) @@ -XXX,XX +XXX,XX @@ static uint64_t mchp_pfsoc_pll_read(void *opaque, hwaddr offset, /* PLL is locked */ val = BIT(25); break; + case PLL_DIV_0_1: + case PLL_DIV_2_3: + val = 0x01000100; /* return valid post divider values */ + break; + case PLL_CTRL2: + val = 0x00001110; + break; + case PLL_REF_FB: + val = 0x00000100; /* RFDIV := 1 */ + break; + case SSCG_REG_2: + val = 0x00000001; /* INTIN := 1 */ + break; + case PLL_PHADJ: + val = 0x00000401; + break; default: qemu_log_mask(LOG_UNIMP, "%s: unimplemented device read " "(size %d, offset 0x%" HWADDR_PRIx ")\n", @@ -XXX,XX +XXX,XX @@ static uint64_t mchp_pfsoc_pll_read(void *opaque, hwaddr offset, return val; } +static void mchp_pfsoc_pll_write(void *opaque, hwaddr offset, + uint64_t value, unsigned size) +{ + qemu_log_mask(LOG_UNIMP, "%s: unimplemented device write " + "(size %d, value 0x%" PRIx64 + ", offset 0x%" HWADDR_PRIx ")\n", + __func__, size, value, offset); +} + static const MemoryRegionOps mchp_pfsoc_pll_ops = { .read = mchp_pfsoc_pll_read, - .write = mchp_pfsoc_dummy_write, + .write = mchp_pfsoc_pll_write, .endianness = DEVICE_LITTLE_ENDIAN, }; @@ -XXX,XX +XXX,XX @@ static void mchp_pfsoc_ioscb_realize(DeviceState *dev, Error **errp) "mchp.pfsoc.ioscb.ccc", IOSCB_CCC_REG_SIZE); memory_region_add_subregion(&s->container, IOSCB_CCC_BASE, &s->ccc); + memory_region_init_io(&s->pll_nw_0, OBJECT(s), &mchp_pfsoc_pll_ops, s, + "mchp.pfsoc.ioscb.pll_nw_0", IOSCB_SUBMOD_REG_SIZE); + memory_region_add_subregion(&s->container, IOSCB_PLL_NW0_BASE, &s->pll_nw_0); + + memory_region_init_io(&s->pll_nw_1, OBJECT(s), &mchp_pfsoc_pll_ops, s, + "mchp.pfsoc.ioscb.pll_nw_1", IOSCB_SUBMOD_REG_SIZE); + memory_region_add_subregion(&s->container, IOSCB_PLL_NW1_BASE, &s->pll_nw_1); + memory_region_init_io(&s->pll_mss, OBJECT(s), &mchp_pfsoc_pll_ops, s, "mchp.pfsoc.ioscb.pll_mss", IOSCB_SUBMOD_REG_SIZE); memory_region_add_subregion(&s->container, IOSCB_PLL_MSS_BASE, &s->pll_mss); diff --git a/hw/misc/mchp_pfsoc_sysreg.c b/hw/misc/mchp_pfsoc_sysreg.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/mchp_pfsoc_sysreg.c +++ b/hw/misc/mchp_pfsoc_sysreg.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/mchp_pfsoc_sysreg.h" #include "system/runstate.h" +#define CLOCK_CONFIG_CR 0x8 +#define RTC_CLOCK_CR 0xc #define MSS_RESET_CR 0x18 #define ENVM_CR 0xb8 #define MESSAGE_INT 0x118c @@ -XXX,XX +XXX,XX @@ static uint64_t mchp_pfsoc_sysreg_read(void *opaque, hwaddr offset, uint32_t val = 0; switch (offset) { + case CLOCK_CONFIG_CR: + /* Icicle kit reference design cpu/axi/ahb divider setting */ + val = 0x24; + break; + case RTC_CLOCK_CR: + /* + * Bit 16 enables the RTC clock, 0x7d is the required divider + * setting for a 125 MHz reference. + */ + val = BIT(16) | 0x7d; + break; case ENVM_CR: /* Indicate the eNVM is running at the configured divider rate */ val = BIT(6); -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> The entry was missing from isa_edata_arr[]. Fixes: 32bbab666 ("target/riscv: add draft RISC-V Zbr ext as xbr0p93") Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-2-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(svrsw60t59b, PRIV_VERSION_1_13_0, ext_svrsw60t59b), ISA_EXT_DATA_ENTRY(svukte, PRIV_VERSION_1_13_0, ext_svukte), ISA_EXT_DATA_ENTRY(svvptc, PRIV_VERSION_1_13_0, ext_svvptc), + ISA_EXT_DATA_ENTRY(xlrbr, PRIV_VERSION_1_13_0, ext_xlrbr), ISA_EXT_DATA_ENTRY(xmipscbop, PRIV_VERSION_1_12_0, ext_xmipscbop), ISA_EXT_DATA_ENTRY(xmipscmov, PRIV_VERSION_1_12_0, ext_xmipscmov), ISA_EXT_DATA_ENTRY(xmipslsp, PRIV_VERSION_1_12_0, ext_xmipslsp), -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Noticed when realizing that 'svadu' was too far apart from 'svade'. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-3-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(smcdeleg, PRIV_VERSION_1_13_0, ext_smcdeleg), ISA_EXT_DATA_ENTRY(smcntrpmf, PRIV_VERSION_1_12_0, ext_smcntrpmf), ISA_EXT_DATA_ENTRY(smcsrind, PRIV_VERSION_1_13_0, ext_smcsrind), + ISA_EXT_DATA_ENTRY(smctr, PRIV_VERSION_1_12_0, ext_smctr), ISA_EXT_DATA_ENTRY(smdbltrp, PRIV_VERSION_1_13_0, ext_smdbltrp), ISA_EXT_DATA_ENTRY(smepmp, PRIV_VERSION_1_12_0, ext_smepmp), ISA_EXT_DATA_ENTRY(smpmpmt, PRIV_VERSION_1_12_0, ext_smpmpmt), @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(sscofpmf, PRIV_VERSION_1_12_0, ext_sscofpmf), ISA_EXT_DATA_ENTRY(sscounterenw, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(sscsrind, PRIV_VERSION_1_12_0, ext_sscsrind), + ISA_EXT_DATA_ENTRY(ssctr, PRIV_VERSION_1_12_0, ext_ssctr), ISA_EXT_DATA_ENTRY(ssdbltrp, PRIV_VERSION_1_13_0, ext_ssdbltrp), ISA_EXT_DATA_ENTRY(ssnpm, PRIV_VERSION_1_13_0, ext_ssnpm), ISA_EXT_DATA_ENTRY(sspm, PRIV_VERSION_1_13_0, ext_sspm), @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(ssu64xl, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(supm, PRIV_VERSION_1_13_0, ext_supm), ISA_EXT_DATA_ENTRY(svade, PRIV_VERSION_1_11_0, ext_svade), - ISA_EXT_DATA_ENTRY(smctr, PRIV_VERSION_1_12_0, ext_smctr), - ISA_EXT_DATA_ENTRY(ssctr, PRIV_VERSION_1_12_0, ext_ssctr), ISA_EXT_DATA_ENTRY(svadu, PRIV_VERSION_1_12_0, ext_svadu), ISA_EXT_DATA_ENTRY(svinval, PRIV_VERSION_1_12_0, ext_svinval), ISA_EXT_DATA_ENTRY(svnapot, PRIV_VERSION_1_12_0, ext_svnapot), -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> We want to reduce the usage of the riscv_cpu_* arrays in target/riscv/cpu.c, centering everything in isa_edata_arr[] instead, to reduce data duplication and make our lives a bit easier when adding new extensions. To do that we'll have to make isa_edata_arr[] do what the other arrays are currently doing, not breaking existing semantics in the process. The riscv_cpu_* arrays have a few exclusive uses: - set default extensions for rv32 and rv64; - create user CPU properties; - misc uses around tcg-cpu.c and kvm-cpu.c. We'll slowly make isa_edata_arr[] supersede these arrays. Start by adding a new 'prop_name' field in RISCVIsaExtData. This field is needed because not all extensions have properties and not all properties match the riscv,isa string name. Create two additional macros and reclassify existing isa_edata_arr[] entries as follows: - ISA_EXT_DATA_ENTRY creates an entry where prop_name == riscv,isa. Most of our regular extensions fall into this category; - ISA_EXPERIMENTAL_EXT_DATA_ENTRY: same as above but add a "x-" to the prop name, i.e. prop_name == "x-" + riscv,isa; - ISA_INTERNAL_EXT_DATA_ENTRY: used to declared internal extensions. By 'internal' we mean users/management can't set them on or off. With these new macros we can start our simplification by changing riscv-qmp-cmds to use isa_edata_arr[]. We'll just scroll through it once and gather what we need. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-4-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 1 + target/riscv/cpu.c | 60 +++++++++++++++++++++++------------ target/riscv/riscv-qmp-cmds.c | 30 ++++-------------- 3 files changed, 47 insertions(+), 44 deletions(-) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ extern const RISCVCPUMultiExtConfig riscv_cpu_named_features[]; typedef struct isa_ext_data { const char *name; + const char *prop_name; int min_version; int ext_enable_offset; } RISCVIsaExtData; diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_cfg_merge(RISCVCPUConfig *dest, const RISCVCPUConfig *src) #include "cpu_cfg_fields.h.inc" } +/* Use this for regular user facing extensions */ #define ISA_EXT_DATA_ENTRY(_name, _min_ver, _prop) \ - {#_name, _min_ver, CPU_CFG_OFFSET(_prop)} + {#_name, #_name, _min_ver, CPU_CFG_OFFSET(_prop)} + +/* + * Same as above but for experimental extensions. We'll add a + * "x-" right after "_name" when creating the user property. + */ +#define ISA_EXPERIMENTAL_EXT_DATA_ENTRY(_name, _min_ver, _prop) \ + {#_name, "x-" #_name, _min_ver, CPU_CFG_OFFSET(_prop)} + +/* + * Internal extensions are extensions we will declare in the + * riscv,isa DT but they don't have an user property, i.e. + * users/management can't enable/disable them. + */ +#define ISA_INTERNAL_EXT_DATA_ENTRY(_name, _min_ver, _prop) \ + {#_name, NULL, _min_ver, CPU_CFG_OFFSET(_prop)} /* * Here are the ordering rules of extension naming defined by RISC-V @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_cfg_merge(RISCVCPUConfig *dest, const RISCVCPUConfig *src) * instead. */ const RISCVIsaExtData isa_edata_arr[] = { - ISA_EXT_DATA_ENTRY(zic64b, PRIV_VERSION_1_12_0, ext_zic64b), + ISA_INTERNAL_EXT_DATA_ENTRY(zic64b, PRIV_VERSION_1_12_0, ext_zic64b), ISA_EXT_DATA_ENTRY(zicbom, PRIV_VERSION_1_12_0, ext_zicbom), ISA_EXT_DATA_ENTRY(zicbop, PRIV_VERSION_1_12_0, ext_zicbop), ISA_EXT_DATA_ENTRY(zicboz, PRIV_VERSION_1_12_0, ext_zicboz), - ISA_EXT_DATA_ENTRY(ziccamoa, PRIV_VERSION_1_11_0, has_priv_1_11), - ISA_EXT_DATA_ENTRY(ziccif, PRIV_VERSION_1_11_0, has_priv_1_11), - ISA_EXT_DATA_ENTRY(zicclsm, PRIV_VERSION_1_11_0, has_priv_1_11), + ISA_INTERNAL_EXT_DATA_ENTRY(ziccamoa, PRIV_VERSION_1_11_0, has_priv_1_11), + ISA_INTERNAL_EXT_DATA_ENTRY(ziccif, PRIV_VERSION_1_11_0, has_priv_1_11), + ISA_INTERNAL_EXT_DATA_ENTRY(zicclsm, PRIV_VERSION_1_11_0, has_priv_1_11), ISA_EXT_DATA_ENTRY(ziccrse, PRIV_VERSION_1_11_0, ext_ziccrse), ISA_EXT_DATA_ENTRY(zicfilp, PRIV_VERSION_1_12_0, ext_zicfilp), ISA_EXT_DATA_ENTRY(zicfiss, PRIV_VERSION_1_13_0, ext_zicfiss), @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(zilsd, PRIV_VERSION_1_12_0, ext_zilsd), ISA_EXT_DATA_ENTRY(zimop, PRIV_VERSION_1_13_0, ext_zimop), ISA_EXT_DATA_ENTRY(zmmul, PRIV_VERSION_1_12_0, ext_zmmul), - ISA_EXT_DATA_ENTRY(za64rs, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(za64rs, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(zaamo, PRIV_VERSION_1_12_0, ext_zaamo), ISA_EXT_DATA_ENTRY(zabha, PRIV_VERSION_1_13_0, ext_zabha), ISA_EXT_DATA_ENTRY(zacas, PRIV_VERSION_1_12_0, ext_zacas), @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(zhinx, PRIV_VERSION_1_12_0, ext_zhinx), ISA_EXT_DATA_ENTRY(zhinxmin, PRIV_VERSION_1_12_0, ext_zhinxmin), ISA_EXT_DATA_ENTRY(sdtrig, PRIV_VERSION_1_12_0, debug), - ISA_EXT_DATA_ENTRY(shcounterenw, PRIV_VERSION_1_12_0, has_priv_1_12), - ISA_EXT_DATA_ENTRY(sha, PRIV_VERSION_1_12_0, ext_sha), - ISA_EXT_DATA_ENTRY(shgatpa, PRIV_VERSION_1_12_0, has_priv_1_12), - ISA_EXT_DATA_ENTRY(shtvala, PRIV_VERSION_1_12_0, has_priv_1_12), - ISA_EXT_DATA_ENTRY(shvsatpa, PRIV_VERSION_1_12_0, has_priv_1_12), - ISA_EXT_DATA_ENTRY(shvstvala, PRIV_VERSION_1_12_0, has_priv_1_12), - ISA_EXT_DATA_ENTRY(shvstvecd, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(shcounterenw, PRIV_VERSION_1_12_0, + has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(sha, PRIV_VERSION_1_12_0, ext_sha), + ISA_INTERNAL_EXT_DATA_ENTRY(shgatpa, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(shtvala, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(shvsatpa, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(shvstvala, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(shvstvecd, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(smaia, PRIV_VERSION_1_12_0, ext_smaia), ISA_EXT_DATA_ENTRY(smcdeleg, PRIV_VERSION_1_13_0, ext_smcdeleg), ISA_EXT_DATA_ENTRY(smcntrpmf, PRIV_VERSION_1_12_0, ext_smcntrpmf), @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(smstateen, PRIV_VERSION_1_12_0, ext_smstateen), ISA_EXT_DATA_ENTRY(ssaia, PRIV_VERSION_1_12_0, ext_ssaia), ISA_EXT_DATA_ENTRY(ssccfg, PRIV_VERSION_1_13_0, ext_ssccfg), - ISA_EXT_DATA_ENTRY(ssccptr, PRIV_VERSION_1_11_0, has_priv_1_11), + ISA_INTERNAL_EXT_DATA_ENTRY(ssccptr, PRIV_VERSION_1_11_0, has_priv_1_11), ISA_EXT_DATA_ENTRY(sscofpmf, PRIV_VERSION_1_12_0, ext_sscofpmf), - ISA_EXT_DATA_ENTRY(sscounterenw, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(sscounterenw, PRIV_VERSION_1_12_0, + has_priv_1_12), ISA_EXT_DATA_ENTRY(sscsrind, PRIV_VERSION_1_12_0, ext_sscsrind), ISA_EXT_DATA_ENTRY(ssctr, PRIV_VERSION_1_12_0, ext_ssctr), ISA_EXT_DATA_ENTRY(ssdbltrp, PRIV_VERSION_1_13_0, ext_ssdbltrp), ISA_EXT_DATA_ENTRY(ssnpm, PRIV_VERSION_1_13_0, ext_ssnpm), ISA_EXT_DATA_ENTRY(sspm, PRIV_VERSION_1_13_0, ext_sspm), - ISA_EXT_DATA_ENTRY(ssstateen, PRIV_VERSION_1_12_0, ext_ssstateen), - ISA_EXT_DATA_ENTRY(ssstrict, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(ssstateen, PRIV_VERSION_1_12_0, ext_ssstateen), + ISA_INTERNAL_EXT_DATA_ENTRY(ssstrict, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(sstc, PRIV_VERSION_1_12_0, ext_sstc), - ISA_EXT_DATA_ENTRY(sstvala, PRIV_VERSION_1_12_0, has_priv_1_12), - ISA_EXT_DATA_ENTRY(sstvecd, PRIV_VERSION_1_12_0, has_priv_1_12), - ISA_EXT_DATA_ENTRY(ssu64xl, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(sstvala, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(sstvecd, PRIV_VERSION_1_12_0, has_priv_1_12), + ISA_INTERNAL_EXT_DATA_ENTRY(ssu64xl, PRIV_VERSION_1_12_0, has_priv_1_12), ISA_EXT_DATA_ENTRY(supm, PRIV_VERSION_1_13_0, ext_supm), ISA_EXT_DATA_ENTRY(svade, PRIV_VERSION_1_11_0, ext_svade), ISA_EXT_DATA_ENTRY(svadu, PRIV_VERSION_1_12_0, ext_svadu), @@ -XXX,XX +XXX,XX @@ const RISCVIsaExtData isa_edata_arr[] = { ISA_EXT_DATA_ENTRY(svnapot, PRIV_VERSION_1_12_0, ext_svnapot), ISA_EXT_DATA_ENTRY(svpbmt, PRIV_VERSION_1_12_0, ext_svpbmt), ISA_EXT_DATA_ENTRY(svrsw60t59b, PRIV_VERSION_1_13_0, ext_svrsw60t59b), - ISA_EXT_DATA_ENTRY(svukte, PRIV_VERSION_1_13_0, ext_svukte), + ISA_EXPERIMENTAL_EXT_DATA_ENTRY(svukte, PRIV_VERSION_1_13_0, ext_svukte), ISA_EXT_DATA_ENTRY(svvptc, PRIV_VERSION_1_13_0, ext_svvptc), ISA_EXT_DATA_ENTRY(xlrbr, PRIV_VERSION_1_13_0, ext_xlrbr), ISA_EXT_DATA_ENTRY(xmipscbop, PRIV_VERSION_1_12_0, ext_xmipscbop), diff --git a/target/riscv/riscv-qmp-cmds.c b/target/riscv/riscv-qmp-cmds.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/riscv-qmp-cmds.c +++ b/target/riscv/riscv-qmp-cmds.c @@ -XXX,XX +XXX,XX @@ static void riscv_obj_add_qdict_prop(Object *obj, QDict *qdict_out, } } -static void riscv_obj_add_multiext_props(Object *obj, QDict *qdict_out, - const RISCVCPUMultiExtConfig *arr) +static void riscv_obj_add_multiext_props(Object *obj, QDict *qdict_out) { - for (int i = 0; arr[i].name != NULL; i++) { - riscv_obj_add_qdict_prop(obj, qdict_out, arr[i].name); - } -} + const RISCVIsaExtData *edata; -static void riscv_obj_add_named_feats_qdict(Object *obj, QDict *qdict_out) -{ - const RISCVCPUMultiExtConfig *named_cfg; - RISCVCPU *cpu = RISCV_CPU(obj); - QObject *value; - bool flag_val; - - for (int i = 0; riscv_cpu_named_features[i].name != NULL; i++) { - named_cfg = &riscv_cpu_named_features[i]; - flag_val = isa_ext_is_enabled(cpu, named_cfg->offset); - value = QOBJECT(qbool_from_bool(flag_val)); - - qdict_put_obj(qdict_out, named_cfg->name, value); + for (edata = isa_edata_arr; edata && edata->name; edata++) { + if (edata->prop_name) { + riscv_obj_add_qdict_prop(obj, qdict_out, edata->prop_name); + } } } @@ -XXX,XX +XXX,XX @@ CpuModelExpansionInfo *qmp_query_cpu_model_expansion(CpuModelExpansionType type, qdict_out = qdict_new(); - riscv_obj_add_multiext_props(obj, qdict_out, riscv_cpu_extensions); - riscv_obj_add_multiext_props(obj, qdict_out, riscv_cpu_experimental_exts); - riscv_obj_add_multiext_props(obj, qdict_out, riscv_cpu_vendor_exts); - riscv_obj_add_named_feats_qdict(obj, qdict_out); + riscv_obj_add_multiext_props(obj, qdict_out); riscv_obj_add_profiles_qdict(obj, qdict_out); /* Add our CPU boolean options too */ -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Commit 7e4f75cadf ("target/riscv/tcg: hide warn for named feats when disabling via priv_ver") changed the design of disable_priv_spec_isa_exts to not warn when disabling what we were calling "named features" at that time. Back in that time we were adding RVA22 profile support and we were dealing with a RVI innovation: named features. These can be define as cute names for pre-existing behavior/parameters, e.g. 'zic64b' means all cache blocks must have 64 bytes. They do get inserted in the riscv,isa but they are not "real" extensions because users shouldn't be setting them in the command line, or so we thought back then, and we attempted to model that by calling it "named features". This didn't age that well: ziccrse is a so called named feature as far as TCG goes, but then KVM had to treat it as a regular extension that can be user set and we made an exception: ziccrse is a named feature that is user set by KVM. "Named features" are regular extensions that might or might not be user set, and might or might not warrant special handling during realize() by setting other parameters. And we'll being treating them as such, which will culminate in the end of riscv_cpu_named_features[] array in the end. This reverts commit 7e4f75cadf44ee67809c7ca82645a289a5268966. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-5-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 13 +++---------- 1 file changed, 3 insertions(+), 10 deletions(-) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_disable_priv_spec_isa_exts(RISCVCPU *cpu) } isa_ext_update_enabled(cpu, edata->ext_enable_offset, false); - - /* - * Do not show user warnings for named features that users - * can't enable/disable in the command line. See commit - * 68c9e54bea for more info. - */ - if (cpu_cfg_offset_is_named_feat(edata->ext_enable_offset)) { - continue; - } #ifndef CONFIG_USER_ONLY warn_report("disabling %s extension for hart 0x%" PRIx64 " because privilege spec version does not match", @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_update_named_features(RISCVCPU *cpu) cpu->cfg.has_priv_1_13 = true; } + /* zic64b is 1.12 or later */ cpu->cfg.ext_zic64b = cpu->cfg.cbom_blocksize == 64 && cpu->cfg.cbop_blocksize == 64 && - cpu->cfg.cboz_blocksize == 64; + cpu->cfg.cboz_blocksize == 64 && + cpu->cfg.has_priv_1_12; cpu->cfg.ext_ssstateen = cpu->cfg.ext_smstateen; -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> We're using both isa_edata_arr[] and riscv_cpu_named_features[] to find an extension name based on a cfg offset. This is reminiscent of a past where isa_edata_arr[] didn't include entries for internal extensions. At this point we can use just isa_edata_arr[]. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-6-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static int cpu_cfg_ext_get_min_version(uint32_t ext_offset) static const char *cpu_cfg_ext_get_name(uint32_t ext_offset) { - const RISCVCPUMultiExtConfig *feat; const RISCVIsaExtData *edata; for (edata = isa_edata_arr; edata->name != NULL; edata++) { @@ -XXX,XX +XXX,XX @@ static const char *cpu_cfg_ext_get_name(uint32_t ext_offset) } } - for (feat = riscv_cpu_named_features; feat->name != NULL; feat++) { - if (feat->offset == ext_offset) { - return feat->name; - } - } - g_assert_not_reached(); } -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Deprecate riscv_cpu_enable_named_feat() by creating implied rules for 'sha' and 'ssstateen'. 'zic64' is always true given that our default block size is set to 64. With this change we homogeneize extension handling when enabling profiles. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-7-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 25 ++++++++++++++++++++++-- target/riscv/tcg/tcg-cpu.c | 40 -------------------------------------- 2 files changed, 23 insertions(+), 42 deletions(-) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static RISCVCPUImpliedExtsRule ZVKSG_IMPLIED = { }, }; +static RISCVCPUImpliedExtsRule SHA_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_sha), + .implied_misa_exts = RVH, + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_smstateen), + CPU_CFG_OFFSET(ext_ssstateen), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + static RISCVCPUImpliedExtsRule SSCFG_IMPLIED = { .ext = CPU_CFG_OFFSET(ext_ssccfg), .implied_multi_exts = { @@ -XXX,XX +XXX,XX @@ static RISCVCPUImpliedExtsRule SSCTR_IMPLIED = { }, }; +static RISCVCPUImpliedExtsRule SSSTATEEN_IMPLIED = { + .ext = CPU_CFG_OFFSET(ext_ssstateen), + .implied_multi_exts = { + CPU_CFG_OFFSET(ext_smstateen), + + RISCV_IMPLIED_EXTS_RULE_END + }, +}; + static RISCVCPUImpliedExtsRule ZVFBFA_IMPLIED = { .ext = CPU_CFG_OFFSET(ext_zvfbfa), .implied_multi_exts = { @@ -XXX,XX +XXX,XX @@ RISCVCPUImpliedExtsRule *riscv_multi_ext_implied_rules[] = { &ZVFBFA_IMPLIED, &ZVFBFMIN_IMPLIED, &ZVFBFWMA_IMPLIED, &ZVFH_IMPLIED, &ZVFHMIN_IMPLIED, &ZVKN_IMPLIED, &ZVKNC_IMPLIED, &ZVKNG_IMPLIED, &ZVKNHB_IMPLIED, - &ZVKS_IMPLIED, &ZVKSC_IMPLIED, &ZVKSG_IMPLIED, &SSCFG_IMPLIED, - &SUPM_IMPLIED, &SSPM_IMPLIED, &SMCTR_IMPLIED, &SSCTR_IMPLIED, + &ZVKS_IMPLIED, &ZVKSC_IMPLIED, &ZVKSG_IMPLIED, &SHA_IMPLIED, + &SSCFG_IMPLIED, &SUPM_IMPLIED, &SSPM_IMPLIED, &SMCTR_IMPLIED, + &SSCTR_IMPLIED, &SSSTATEEN_IMPLIED, NULL }; diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static const char *cpu_cfg_ext_get_name(uint32_t ext_offset) g_assert_not_reached(); } -static bool cpu_cfg_offset_is_named_feat(uint32_t ext_offset) -{ - const RISCVCPUMultiExtConfig *feat; - - for (feat = riscv_cpu_named_features; feat->name != NULL; feat++) { - if (feat->offset == ext_offset) { - return true; - } - } - - return false; -} - -static void riscv_cpu_enable_named_feat(RISCVCPU *cpu, uint32_t feat_offset) -{ - /* - * All other named features are already enabled - * in riscv_tcg_cpu_instance_init(). - */ - switch (feat_offset) { - case CPU_CFG_OFFSET(ext_zic64b): - cpu->cfg.cbom_blocksize = 64; - cpu->cfg.cbop_blocksize = 64; - cpu->cfg.cboz_blocksize = 64; - break; - case CPU_CFG_OFFSET(ext_sha): - if (!cpu_misa_ext_is_user_set(RVH)) { - riscv_cpu_write_misa_bit(cpu, RVH, true); - } - /* fallthrough */ - case CPU_CFG_OFFSET(ext_ssstateen): - cpu->cfg.ext_smstateen = true; - break; - } -} - static void cpu_bump_multi_ext_priv_ver(CPURISCVState *env, uint32_t ext_offset) { @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_set_profile(RISCVCPU *cpu, ext_offset = profile->ext_offsets[i]; if (profile->enabled) { - if (cpu_cfg_offset_is_named_feat(ext_offset)) { - riscv_cpu_enable_named_feat(cpu, ext_offset); - } - cpu_bump_multi_ext_priv_ver(&cpu->env, ext_offset); } -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> This array has no uses left. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-8-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 1 - target/riscv/cpu.c | 26 -------------------------- target/riscv/tcg/tcg-cpu.c | 4 ++-- 3 files changed, 2 insertions(+), 29 deletions(-) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct RISCVCPUMultiExtConfig { extern const RISCVCPUMultiExtConfig riscv_cpu_extensions[]; extern const RISCVCPUMultiExtConfig riscv_cpu_vendor_exts[]; extern const RISCVCPUMultiExtConfig riscv_cpu_experimental_exts[]; -extern const RISCVCPUMultiExtConfig riscv_cpu_named_features[]; typedef struct isa_ext_data { const char *name; diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const RISCVCPUMultiExtConfig riscv_cpu_experimental_exts[] = { { }, }; -/* - * 'Named features' is the name we give to extensions that we - * don't want to expose to users. They are either immutable - * (always enabled/disable) or they'll vary depending on - * the resulting CPU state. - * - * Some of them are always enabled depending on priv version - * of the CPU and are declared directly in isa_edata_arr[]. - * The ones listed here have special checks during finalize() - * time and require their own flags like regular extensions. - * See riscv_cpu_update_named_features() for more info. - */ -const RISCVCPUMultiExtConfig riscv_cpu_named_features[] = { - MULTI_EXT_CFG_BOOL("zic64b", ext_zic64b, true), - MULTI_EXT_CFG_BOOL("ssstateen", ext_ssstateen, true), - MULTI_EXT_CFG_BOOL("sha", ext_sha, true), - - /* - * 'ziccrse' has its own flag because the KVM driver - * wants to enable/disable it on its own accord. - */ - MULTI_EXT_CFG_BOOL("ziccrse", ext_ziccrse, true), - - { }, -}; - static void cpu_set_prop_err(RISCVCPU *cpu, const char *propname, Error **errp) { diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_disable_priv_spec_isa_exts(RISCVCPU *cpu) } } -static void riscv_cpu_update_named_features(RISCVCPU *cpu) +static void riscv_cpu_update_cfg(RISCVCPU *cpu) { if (cpu->env.priv_ver >= PRIV_VERSION_1_11_0) { cpu->cfg.has_priv_1_11 = true; @@ -XXX,XX +XXX,XX @@ void riscv_tcg_cpu_finalize_features(RISCVCPU *cpu, Error **errp) return; } - riscv_cpu_update_named_features(cpu); + riscv_cpu_update_cfg(cpu); riscv_cpu_validate_profiles(cpu); if (cpu->cfg.ext_smepmp && !cpu->cfg.pmp) { -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> The non-standard extensions, in this particular function the vendor extensions, are all riscv,isa names that starts with 'x'. In theory this is a bit slower than using riscv_cpu_vendor_exts (isa_edata_arr is longer) but riscv_cpu_update_misa_x() is executed only once during finalize(), i.e. not a hot path. We're accepting a tiny performance hit as as a tradeoff for the code simplication we'll have later by removing all riscv_cpu_* arrays. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-9-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_update_misa_c(RISCVCPU *cpu) static void riscv_cpu_update_misa_x(RISCVCPU *cpu) { CPURISCVState *env = &cpu->env; - const RISCVCPUMultiExtConfig *arr = riscv_cpu_vendor_exts; + const RISCVIsaExtData *edata; - for (int i = 0; arr[i].name != NULL; i++) { - if (isa_ext_is_enabled(cpu, arr[i].offset)) { + for (edata = isa_edata_arr; edata && edata->name; edata++) { + if (edata->name[0] == 'x' + && isa_ext_is_enabled(cpu, edata->ext_enable_offset)) { riscv_cpu_set_misa_ext(env, env->misa_ext | RVX); break; } -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Use isa_edata_arr[] directly instead of going through 3 different arrays to populate the unavailable KVM properties. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-10-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/kvm/kvm-cpu.c | 25 ++++++++++--------------- 1 file changed, 10 insertions(+), 15 deletions(-) diff --git a/target/riscv/kvm/kvm-cpu.c b/target/riscv/kvm/kvm-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/kvm/kvm-cpu.c +++ b/target/riscv/kvm/kvm-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_add_kvm_unavail_prop(Object *obj, const char *prop_name) NULL, (void *)prop_name); } -static void riscv_cpu_add_kvm_unavail_prop_array(Object *obj, - const RISCVCPUMultiExtConfig *array) -{ - const RISCVCPUMultiExtConfig *prop; - - g_assert(array); - - for (prop = array; prop && prop->name; prop++) { - riscv_cpu_add_kvm_unavail_prop(obj, prop->name); - } -} - static void kvm_riscv_add_cpu_user_properties(Object *cpu_obj) { + const RISCVIsaExtData *edata; int i; riscv_add_satp_mode_properties(cpu_obj); @@ -XXX,XX +XXX,XX @@ static void kvm_riscv_add_cpu_user_properties(Object *cpu_obj) NULL, multi_cfg); } - riscv_cpu_add_kvm_unavail_prop_array(cpu_obj, riscv_cpu_extensions); - riscv_cpu_add_kvm_unavail_prop_array(cpu_obj, riscv_cpu_vendor_exts); - riscv_cpu_add_kvm_unavail_prop_array(cpu_obj, riscv_cpu_experimental_exts); + /* + * Mark all isa_edata_arr properties that collides with + * a KVM property as unavailable. + */ + for (edata = isa_edata_arr; edata && edata->name; edata++) { + if (edata->prop_name) { + riscv_cpu_add_kvm_unavail_prop(cpu_obj, edata->prop_name); + } + } /* We don't have the needed KVM support for profiles */ for (i = 0; riscv_profiles[i] != NULL; i++) { -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Use isa_edata_arr[] to enable all feasible extensions. Filter experimental and vendor extensions by checking if the riscv,isa or the prop name starts with 'x'. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-11-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_init_max_cpu_extensions(Object *obj) { RISCVCPU *cpu = RISCV_CPU(obj); CPURISCVState *env = &cpu->env; - const RISCVCPUMultiExtConfig *prop; + const RISCVIsaExtData *edata; /* Enable RVG and RVV that are disabled by default */ riscv_cpu_set_misa_ext(env, env->misa_ext | RVB | RVG | RVV); - for (prop = riscv_cpu_extensions; prop && prop->name; prop++) { - isa_ext_update_enabled(cpu, prop->offset, true); + for (edata = isa_edata_arr; edata && edata->name; edata++) { + if (edata->name[0] == 'x' + || (edata->prop_name && edata->prop_name[0] == 'x')) { + continue; + } + + isa_ext_update_enabled(cpu, edata->ext_enable_offset, true); } /* -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> The cpu_get_multi_ext_cfg/cpu_set_multi_ext_cfg callbacks are using a RISCVCPUMultiExtConfig pointer as opaque, but internally we're just using multi_ext_cfg->offset. Use multi_ext_cfg->offset as opaque instead. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-12-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_add_profiles(Object *cpu_obj) static void cpu_set_multi_ext_cfg(Object *obj, Visitor *v, const char *name, void *opaque, Error **errp) { - const RISCVCPUMultiExtConfig *multi_ext_cfg = opaque; RISCVCPU *cpu = RISCV_CPU(obj); + uint32_t cfg_offset = *(uint32_t *)opaque; bool vendor_cpu = riscv_cpu_is_vendor(obj); bool prev_val, value; @@ -XXX,XX +XXX,XX @@ static void cpu_set_multi_ext_cfg(Object *obj, Visitor *v, const char *name, return; } - cpu_cfg_ext_add_user_opt(multi_ext_cfg->offset, value); + cpu_cfg_ext_add_user_opt(cfg_offset, value); - prev_val = isa_ext_is_enabled(cpu, multi_ext_cfg->offset); + prev_val = isa_ext_is_enabled(cpu, cfg_offset); if (value == prev_val) { return; @@ -XXX,XX +XXX,XX @@ static void cpu_set_multi_ext_cfg(Object *obj, Visitor *v, const char *name, } if (value) { - cpu_bump_multi_ext_priv_ver(&cpu->env, multi_ext_cfg->offset); + cpu_bump_multi_ext_priv_ver(&cpu->env, cfg_offset); } - isa_ext_update_enabled(cpu, multi_ext_cfg->offset, value); + isa_ext_update_enabled(cpu, cfg_offset, value); } static void cpu_get_multi_ext_cfg(Object *obj, Visitor *v, const char *name, void *opaque, Error **errp) { - const RISCVCPUMultiExtConfig *multi_ext_cfg = opaque; - bool value = isa_ext_is_enabled(RISCV_CPU(obj), multi_ext_cfg->offset); + uint32_t cfg_offset = *(uint32_t *)opaque; + bool value = isa_ext_is_enabled(RISCV_CPU(obj), cfg_offset); visit_type_bool(v, name, &value, errp); } @@ -XXX,XX +XXX,XX @@ static void cpu_add_multi_ext_prop(Object *cpu_obj, object_property_add(cpu_obj, multi_cfg->name, "bool", cpu_get_multi_ext_cfg, cpu_set_multi_ext_cfg, - NULL, (void *)multi_cfg); + NULL, (void *)&multi_cfg->offset); if (!generic_cpu) { return; -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Do not rely on riscv_cpu_* arrays to set rv32/rv64 CPU defaults - add them to the CPU definition like we do with all other CPUs (aside from 'max'). Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-13-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.c | 40 ++++++++++++++++++++++++++++++++++++++ target/riscv/tcg/tcg-cpu.c | 14 ------------- 2 files changed, 40 insertions(+), 14 deletions(-) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static const TypeInfo riscv_cpu_type_infos[] = { DEFINE_RISCV_CPU(TYPE_RISCV_CPU_BASE32, TYPE_RISCV_DYNAMIC_CPU, .cfg.max_satp_mode = VM_1_10_SV32, .misa_mxl_max = MXL_RV32, + + /* Default extensions as of QEMU 11.1. */ + .cfg.ext_zicbom = true, + .cfg.ext_zicbop = true, + .cfg.ext_zicboz = true, + .cfg.ext_zicntr = true, + .cfg.ext_zicsr = true, + .cfg.ext_zifencei = true, + .cfg.ext_zihintntl = true, + .cfg.ext_zihintpause = true, + .cfg.ext_zihpm = true, + .cfg.ext_zawrs = true, + .cfg.ext_zfa = true, + .cfg.ext_zba = true, + .cfg.ext_zbb = true, + .cfg.ext_zbc = true, + .cfg.ext_zbs = true, + .cfg.ext_sstc = true, + .cfg.ext_svadu = true, + .cfg.ext_svvptc = true, ), DEFINE_RISCV_CPU(TYPE_RISCV_CPU_IBEX, TYPE_RISCV_VENDOR_CPU, @@ -XXX,XX +XXX,XX @@ static const TypeInfo riscv_cpu_type_infos[] = { DEFINE_RISCV_CPU(TYPE_RISCV_CPU_BASE64, TYPE_RISCV_DYNAMIC_CPU, .cfg.max_satp_mode = VM_1_10_SV57, .misa_mxl_max = MXL_RV64, + + /* Default extensions as of QEMU 11.1. */ + .cfg.ext_zicbom = true, + .cfg.ext_zicbop = true, + .cfg.ext_zicboz = true, + .cfg.ext_zicntr = true, + .cfg.ext_zicsr = true, + .cfg.ext_zifencei = true, + .cfg.ext_zihintntl = true, + .cfg.ext_zihintpause = true, + .cfg.ext_zihpm = true, + .cfg.ext_zawrs = true, + .cfg.ext_zfa = true, + .cfg.ext_zba = true, + .cfg.ext_zbb = true, + .cfg.ext_zbc = true, + .cfg.ext_zbs = true, + .cfg.ext_sstc = true, + .cfg.ext_svadu = true, + .cfg.ext_svvptc = true, ), DEFINE_RISCV_CPU(TYPE_RISCV_CPU_SIFIVE_E51, TYPE_RISCV_CPU_SIFIVE_E, diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void cpu_get_multi_ext_cfg(Object *obj, Visitor *v, const char *name, static void cpu_add_multi_ext_prop(Object *cpu_obj, const RISCVCPUMultiExtConfig *multi_cfg) { - bool generic_cpu = riscv_cpu_is_generic(cpu_obj); - object_property_add(cpu_obj, multi_cfg->name, "bool", cpu_get_multi_ext_cfg, cpu_set_multi_ext_cfg, NULL, (void *)&multi_cfg->offset); - - if (!generic_cpu) { - return; - } - - /* - * Set def val directly instead of using - * object_property_set_bool() to save the set() - * callback hash for user inputs. - */ - isa_ext_update_enabled(RISCV_CPU(cpu_obj), multi_cfg->offset, - multi_cfg->enabled); } static void riscv_cpu_add_multiext_prop_array(Object *obj, -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> This change has been done twice now: one in riscv-qmp-cmds, another in the KVM. We're now ready to do it for TCG. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-14-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/tcg/tcg-cpu.c | 34 ++++++++++------------------------ 1 file changed, 10 insertions(+), 24 deletions(-) diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/tcg/tcg-cpu.c +++ b/target/riscv/tcg/tcg-cpu.c @@ -XXX,XX +XXX,XX @@ static void cpu_get_multi_ext_cfg(Object *obj, Visitor *v, const char *name, visit_type_bool(v, name, &value, errp); } -static void cpu_add_multi_ext_prop(Object *cpu_obj, - const RISCVCPUMultiExtConfig *multi_cfg) -{ - object_property_add(cpu_obj, multi_cfg->name, "bool", - cpu_get_multi_ext_cfg, - cpu_set_multi_ext_cfg, - NULL, (void *)&multi_cfg->offset); -} - -static void riscv_cpu_add_multiext_prop_array(Object *obj, - const RISCVCPUMultiExtConfig *array) -{ - const RISCVCPUMultiExtConfig *prop; - - g_assert(array); - - for (prop = array; prop && prop->name; prop++) { - cpu_add_multi_ext_prop(obj, prop); - } -} - /* * Add CPU properties with user-facing flags. * @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_add_multiext_prop_array(Object *obj, */ static void riscv_cpu_add_user_properties(Object *obj) { + const RISCVIsaExtData *edata; + #ifndef CONFIG_USER_ONLY riscv_add_satp_mode_properties(obj); #endif riscv_cpu_add_misa_properties(obj); - riscv_cpu_add_multiext_prop_array(obj, riscv_cpu_extensions); - riscv_cpu_add_multiext_prop_array(obj, riscv_cpu_vendor_exts); - riscv_cpu_add_multiext_prop_array(obj, riscv_cpu_experimental_exts); + for (edata = isa_edata_arr; edata && edata->name; edata++) { + if (edata->prop_name) { + object_property_add(obj, edata->prop_name, "bool", + cpu_get_multi_ext_cfg, + cpu_set_multi_ext_cfg, + NULL, (void *)&edata->ext_enable_offset); + } + } riscv_cpu_add_profiles(obj); } -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> There is no more uses left for these arrays. isa_edata_arr[] is doing everything we need, making our lives a little easier when adding new extensions. Signed-off-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512032926.1978818-15-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/cpu.h | 10 --- target/riscv/cpu.c | 159 --------------------------------------------- 2 files changed, 169 deletions(-) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -XXX,XX +XXX,XX @@ bool isa_ext_is_enabled(RISCVCPU *cpu, uint32_t ext_offset); void riscv_cpu_set_misa_ext(CPURISCVState *env, uint32_t ext); bool riscv_cpu_is_vendor(Object *cpu_obj); -typedef struct RISCVCPUMultiExtConfig { - const char *name; - uint32_t offset; - bool enabled; -} RISCVCPUMultiExtConfig; - -extern const RISCVCPUMultiExtConfig riscv_cpu_extensions[]; -extern const RISCVCPUMultiExtConfig riscv_cpu_vendor_exts[]; -extern const RISCVCPUMultiExtConfig riscv_cpu_experimental_exts[]; - typedef struct isa_ext_data { const char *name; const char *prop_name; diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ const char *riscv_get_misa_ext_description(uint32_t bit) return val; } -#define MULTI_EXT_CFG_BOOL(_name, _prop, _defval) \ - {.name = _name, .offset = CPU_CFG_OFFSET(_prop), \ - .enabled = _defval} - -const RISCVCPUMultiExtConfig riscv_cpu_extensions[] = { - /* Defaults for standard extensions */ - MULTI_EXT_CFG_BOOL("sscofpmf", ext_sscofpmf, false), - MULTI_EXT_CFG_BOOL("smcntrpmf", ext_smcntrpmf, false), - MULTI_EXT_CFG_BOOL("smcsrind", ext_smcsrind, false), - MULTI_EXT_CFG_BOOL("smcdeleg", ext_smcdeleg, false), - MULTI_EXT_CFG_BOOL("sscsrind", ext_sscsrind, false), - MULTI_EXT_CFG_BOOL("ssccfg", ext_ssccfg, false), - MULTI_EXT_CFG_BOOL("smctr", ext_smctr, false), - MULTI_EXT_CFG_BOOL("ssctr", ext_ssctr, false), - MULTI_EXT_CFG_BOOL("zifencei", ext_zifencei, true), - MULTI_EXT_CFG_BOOL("zicfilp", ext_zicfilp, false), - MULTI_EXT_CFG_BOOL("zicfiss", ext_zicfiss, false), - MULTI_EXT_CFG_BOOL("zicsr", ext_zicsr, true), - MULTI_EXT_CFG_BOOL("zihintntl", ext_zihintntl, true), - MULTI_EXT_CFG_BOOL("zihintpause", ext_zihintpause, true), - MULTI_EXT_CFG_BOOL("zimop", ext_zimop, false), - MULTI_EXT_CFG_BOOL("zcmop", ext_zcmop, false), - MULTI_EXT_CFG_BOOL("zacas", ext_zacas, false), - MULTI_EXT_CFG_BOOL("zama16b", ext_zama16b, false), - MULTI_EXT_CFG_BOOL("zabha", ext_zabha, false), - MULTI_EXT_CFG_BOOL("zaamo", ext_zaamo, false), - MULTI_EXT_CFG_BOOL("zalasr", ext_zalasr, false), - MULTI_EXT_CFG_BOOL("zalrsc", ext_zalrsc, false), - MULTI_EXT_CFG_BOOL("zawrs", ext_zawrs, true), - MULTI_EXT_CFG_BOOL("zfa", ext_zfa, true), - MULTI_EXT_CFG_BOOL("zfbfmin", ext_zfbfmin, false), - MULTI_EXT_CFG_BOOL("zfh", ext_zfh, false), - MULTI_EXT_CFG_BOOL("zfhmin", ext_zfhmin, false), - MULTI_EXT_CFG_BOOL("zve32f", ext_zve32f, false), - MULTI_EXT_CFG_BOOL("zve32x", ext_zve32x, false), - MULTI_EXT_CFG_BOOL("zve64f", ext_zve64f, false), - MULTI_EXT_CFG_BOOL("zve64d", ext_zve64d, false), - MULTI_EXT_CFG_BOOL("zve64x", ext_zve64x, false), - MULTI_EXT_CFG_BOOL("zvfbfa", ext_zvfbfa, false), - MULTI_EXT_CFG_BOOL("zvfbfmin", ext_zvfbfmin, false), - MULTI_EXT_CFG_BOOL("zvfbfwma", ext_zvfbfwma, false), - MULTI_EXT_CFG_BOOL("zvfh", ext_zvfh, false), - MULTI_EXT_CFG_BOOL("zvfhmin", ext_zvfhmin, false), - MULTI_EXT_CFG_BOOL("sstc", ext_sstc, true), - MULTI_EXT_CFG_BOOL("ssnpm", ext_ssnpm, false), - MULTI_EXT_CFG_BOOL("sspm", ext_sspm, false), - MULTI_EXT_CFG_BOOL("supm", ext_supm, false), - - MULTI_EXT_CFG_BOOL("smaia", ext_smaia, false), - MULTI_EXT_CFG_BOOL("smdbltrp", ext_smdbltrp, false), - MULTI_EXT_CFG_BOOL("smepmp", ext_smepmp, false), - MULTI_EXT_CFG_BOOL("smpmpmt", ext_smpmpmt, false), - MULTI_EXT_CFG_BOOL("smrnmi", ext_smrnmi, false), - MULTI_EXT_CFG_BOOL("smmpm", ext_smmpm, false), - MULTI_EXT_CFG_BOOL("smnpm", ext_smnpm, false), - MULTI_EXT_CFG_BOOL("smstateen", ext_smstateen, false), - MULTI_EXT_CFG_BOOL("ssaia", ext_ssaia, false), - MULTI_EXT_CFG_BOOL("ssdbltrp", ext_ssdbltrp, false), - MULTI_EXT_CFG_BOOL("svade", ext_svade, false), - MULTI_EXT_CFG_BOOL("svadu", ext_svadu, true), - MULTI_EXT_CFG_BOOL("svinval", ext_svinval, false), - MULTI_EXT_CFG_BOOL("svnapot", ext_svnapot, false), - MULTI_EXT_CFG_BOOL("svpbmt", ext_svpbmt, false), - MULTI_EXT_CFG_BOOL("svrsw60t59b", ext_svrsw60t59b, false), - MULTI_EXT_CFG_BOOL("svvptc", ext_svvptc, true), - - MULTI_EXT_CFG_BOOL("zicntr", ext_zicntr, true), - MULTI_EXT_CFG_BOOL("zihpm", ext_zihpm, true), - MULTI_EXT_CFG_BOOL("zilsd", ext_zilsd, false), - - MULTI_EXT_CFG_BOOL("zba", ext_zba, true), - MULTI_EXT_CFG_BOOL("zbb", ext_zbb, true), - MULTI_EXT_CFG_BOOL("zbc", ext_zbc, true), - MULTI_EXT_CFG_BOOL("zbkb", ext_zbkb, false), - MULTI_EXT_CFG_BOOL("zbkc", ext_zbkc, false), - MULTI_EXT_CFG_BOOL("zbkx", ext_zbkx, false), - MULTI_EXT_CFG_BOOL("zbs", ext_zbs, true), - MULTI_EXT_CFG_BOOL("zk", ext_zk, false), - MULTI_EXT_CFG_BOOL("zkn", ext_zkn, false), - MULTI_EXT_CFG_BOOL("zknd", ext_zknd, false), - MULTI_EXT_CFG_BOOL("zkne", ext_zkne, false), - MULTI_EXT_CFG_BOOL("zknh", ext_zknh, false), - MULTI_EXT_CFG_BOOL("zkr", ext_zkr, false), - MULTI_EXT_CFG_BOOL("zks", ext_zks, false), - MULTI_EXT_CFG_BOOL("zksed", ext_zksed, false), - MULTI_EXT_CFG_BOOL("zksh", ext_zksh, false), - MULTI_EXT_CFG_BOOL("zkt", ext_zkt, false), - MULTI_EXT_CFG_BOOL("ztso", ext_ztso, false), - - MULTI_EXT_CFG_BOOL("zdinx", ext_zdinx, false), - MULTI_EXT_CFG_BOOL("zfinx", ext_zfinx, false), - MULTI_EXT_CFG_BOOL("zhinx", ext_zhinx, false), - MULTI_EXT_CFG_BOOL("zhinxmin", ext_zhinxmin, false), - - MULTI_EXT_CFG_BOOL("zicbom", ext_zicbom, true), - MULTI_EXT_CFG_BOOL("zicbop", ext_zicbop, true), - MULTI_EXT_CFG_BOOL("zicboz", ext_zicboz, true), - - MULTI_EXT_CFG_BOOL("zmmul", ext_zmmul, false), - - MULTI_EXT_CFG_BOOL("zca", ext_zca, false), - MULTI_EXT_CFG_BOOL("zcb", ext_zcb, false), - MULTI_EXT_CFG_BOOL("zcd", ext_zcd, false), - MULTI_EXT_CFG_BOOL("zce", ext_zce, false), - MULTI_EXT_CFG_BOOL("zcf", ext_zcf, false), - MULTI_EXT_CFG_BOOL("zcmp", ext_zcmp, false), - MULTI_EXT_CFG_BOOL("zcmt", ext_zcmt, false), - MULTI_EXT_CFG_BOOL("zicond", ext_zicond, false), - MULTI_EXT_CFG_BOOL("zclsd", ext_zclsd, false), - - /* Vector cryptography extensions */ - MULTI_EXT_CFG_BOOL("zvbb", ext_zvbb, false), - MULTI_EXT_CFG_BOOL("zvbc", ext_zvbc, false), - MULTI_EXT_CFG_BOOL("zvkb", ext_zvkb, false), - MULTI_EXT_CFG_BOOL("zvkg", ext_zvkg, false), - MULTI_EXT_CFG_BOOL("zvkned", ext_zvkned, false), - MULTI_EXT_CFG_BOOL("zvknha", ext_zvknha, false), - MULTI_EXT_CFG_BOOL("zvknhb", ext_zvknhb, false), - MULTI_EXT_CFG_BOOL("zvksed", ext_zvksed, false), - MULTI_EXT_CFG_BOOL("zvksh", ext_zvksh, false), - MULTI_EXT_CFG_BOOL("zvkt", ext_zvkt, false), - MULTI_EXT_CFG_BOOL("zvkn", ext_zvkn, false), - MULTI_EXT_CFG_BOOL("zvknc", ext_zvknc, false), - MULTI_EXT_CFG_BOOL("zvkng", ext_zvkng, false), - MULTI_EXT_CFG_BOOL("zvks", ext_zvks, false), - MULTI_EXT_CFG_BOOL("zvksc", ext_zvksc, false), - MULTI_EXT_CFG_BOOL("zvksg", ext_zvksg, false), - - { }, -}; - -const RISCVCPUMultiExtConfig riscv_cpu_vendor_exts[] = { - MULTI_EXT_CFG_BOOL("xtheadba", ext_xtheadba, false), - MULTI_EXT_CFG_BOOL("xtheadbb", ext_xtheadbb, false), - MULTI_EXT_CFG_BOOL("xtheadbs", ext_xtheadbs, false), - MULTI_EXT_CFG_BOOL("xtheadcmo", ext_xtheadcmo, false), - MULTI_EXT_CFG_BOOL("xtheadcondmov", ext_xtheadcondmov, false), - MULTI_EXT_CFG_BOOL("xtheadfmemidx", ext_xtheadfmemidx, false), - MULTI_EXT_CFG_BOOL("xtheadfmv", ext_xtheadfmv, false), - MULTI_EXT_CFG_BOOL("xtheadmac", ext_xtheadmac, false), - MULTI_EXT_CFG_BOOL("xtheadmemidx", ext_xtheadmemidx, false), - MULTI_EXT_CFG_BOOL("xtheadmempair", ext_xtheadmempair, false), - MULTI_EXT_CFG_BOOL("xtheadsync", ext_xtheadsync, false), - MULTI_EXT_CFG_BOOL("xventanacondops", ext_XVentanaCondOps, false), - MULTI_EXT_CFG_BOOL("xmipscbop", ext_xmipscbop, false), - MULTI_EXT_CFG_BOOL("xmipscmov", ext_xmipscmov, false), - MULTI_EXT_CFG_BOOL("xmipslsp", ext_xmipslsp, false), - MULTI_EXT_CFG_BOOL("xlrbr", ext_xlrbr, false), - - { }, -}; - -/* These are experimental so mark with 'x-' */ -const RISCVCPUMultiExtConfig riscv_cpu_experimental_exts[] = { - MULTI_EXT_CFG_BOOL("x-svukte", ext_svukte, false), - - { }, -}; - static void cpu_set_prop_err(RISCVCPU *cpu, const char *propname, Error **errp) { -- 2.53.0 From: Fangyu Yu <fangyu.yu@linux.alibaba.com> Fix IOCOUNTINH.CY toggle detection by comparing normalized CY bit rather than XORing whole register with boolean. Fixes: 2cf2a6c027ba ("hw/riscv/riscv-iommu: add IOCOUNTINH mmio writes") Signed-off-by: Fangyu Yu <fangyu.yu@linux.alibaba.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Nutty Liu <nutty.liu@hotmail.com> Message-ID: <20260509074941.99295-1-fangyu.yu@linux.alibaba.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu-hpm.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/riscv/riscv-iommu-hpm.c b/hw/riscv/riscv-iommu-hpm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu-hpm.c +++ b/hw/riscv/riscv-iommu-hpm.c @@ -XXX,XX +XXX,XX @@ void riscv_iommu_process_iocntinh_cy(RISCVIOMMUState *s, bool prev_cy_inh) s, RISCV_IOMMU_REG_IOCOUNTINH); /* We only need to process CY bit toggle. */ - if (!(inhibit ^ prev_cy_inh)) { + bool cy_inh = !!(inhibit & RISCV_IOMMU_IOCOUNTINH_CY); + if (cy_inh == prev_cy_inh) { return; } -- 2.53.0 From: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> The priv spec defines, for RV64, that the upper 10 bits of pmpaddr0-pmpaddr63 are WARL and are supposed to be cleared. After this patch, using the bug reproducer in [1], writing ffffffffffffffff in pmpaddr0 and reading it back now results in 003fffffffffffff. Here's the 'diff -cp' dump before and after this change: *************** IN: *** 5272,5278 **** pmpcfg10 0000000000000000 pmpcfg12 0000000000000000 pmpcfg14 0000000000000000 ! pmpaddr0 ffffffffffffffff pmpaddr1 0000000000000000 pmpaddr2 0000000000000000 pmpaddr3 0000000000000000 Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260514123342.2139464-1-daniel.barboza@oss.qualcomm.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ static RISCVException read_pmpaddr(CPURISCVState *env, int csrno, target_ulong *val) { *val = pmpaddr_csr_read(env, csrno - CSR_PMPADDR0); + + /* + * For RV64, bits 54-63 of the address registers + * PMPAADDR(0-63) is a WARL zero field (priv spec, + * section "Physical Memory Protection CSRs"). + * + * We'll have to add an annoying TARGET_RISCV64 gate + * here to avoid complaints about masking bits 0-53 + * of a potential 32 bit target_ulong '*var'. + */ +#ifdef TARGET_RISCV64 + if (env->misa_mxl == MXL_RV64 + && csrno >= CSR_PMPADDR0 && csrno <= CSR_PMPADDR63) { + target_ulong read_mask = MAKE_64BIT_MASK(0, 54); + *val &= read_mask; + } +#endif return RISCV_EXCP_NONE; } -- 2.53.0 From: Zishun Yi <vulab@iscas.ac.cn> In build_rimt(), the calculation of `num_ids` for the ID mapping array incorrectly uses the same formula (`0xffff - s->pci_iommu_bdf`) for both System IOMMU and PCI IOMMU topologies. For a System IOMMU, `s->pci_iommu_bdf` is 0. This results in a `num_ids` value of 0xffff. Since the source ID base starts at 0, the mapping only covers Requester IDs from 0 to 0xfffe. The final valid PCI Requester ID (0xffff) is erroneously omitted from the RIMT table. Fix this by decoupling the `num_ids` calculation. For System IOMMUs, explicitly set `num_ids` to 0x10000 to cover the entire PCI Requester ID space. This issue was discovered and reported by SpecHunter, an AI-driven architecture specification analysis tool. Link: https://github.com/yizishun/rv-isa-sec/blob/c78dacf66c8acd677b3538c837fde310bb71a97b/output/riscv-server-platform/pr-102/qemu.txt#L32 Signed-off-by: Zishun Yi <vulab@iscas.ac.cn> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260512062310.348208-1-vulab@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/virt-acpi-build.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/riscv/virt-acpi-build.c b/hw/riscv/virt-acpi-build.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt-acpi-build.c +++ b/hw/riscv/virt-acpi-build.c @@ -XXX,XX +XXX,XX @@ static void build_rimt(GArray *table_data, BIOSLinker *linker, range = &g_array_index(iommu_idmaps, AcpiRimtIdMapping, i); if (virt_is_iommu_sys_enabled(s)) { range->source_id_base = 0; + range->num_ids = 0x10000; } else { range->source_id_base = s->pci_iommu_bdf + 1; + range->num_ids = 0xffff - s->pci_iommu_bdf; } - range->num_ids = 0xffff - s->pci_iommu_bdf; build_rimt_id_mapping(table_data, range->source_id_base, range->num_ids, iommu_offset); } -- 2.53.0 From: Portia Stephens <portias@oss.tenstorrent.com> The counter value was not being bitshifted for a hpmcounterh read resulting in hpmcounterh returning the bottom 32-bits. Fixes: cfc96df65e01 ("target/riscv: Remove upper_half from riscv_pmu_ctr_get_fixed_counters_val") Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3498 Cc: qemu-stable@nongnu.org Signed-off-by: Portia Stephens <portias@oss.tenstorrent.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20260519043352.3685866-1-stephensportia@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- target/riscv/csr.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/target/riscv/csr.c b/target/riscv/csr.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -XXX,XX +XXX,XX @@ RISCVException riscv_pmu_read_ctr(CPURISCVState *env, target_ulong *val, */ if (riscv_pmu_ctr_monitor_cycles(env, ctr_idx) || riscv_pmu_ctr_monitor_instructions(env, ctr_idx)) { - *val = riscv_pmu_ctr_get_fixed_counters_val(env, ctr_idx) - - ctr_prev + ctr_val; + uint64_t cntr = riscv_pmu_ctr_get_fixed_counters_val(env, ctr_idx) - + ctr_prev + ctr_val; + *val = extract64(cntr, start, length); } else { *val = ctr_val; } -- 2.53.0 From: Jim Shu <jim.shu@sifive.com> According to the AIA spec ch4.7 ("Precise effects on interrupt-pending bits"), pending bit of APLIC should be set/cleared whenever the rectified input value is high/low in the both level-trigger mode and direct delivery mode. Currently, QEMU APLIC only clears the pending bit when interrupt is claimed in APLIC, but not clears it when the rectified input value is low. (e.g. IRQ source signal is low in the LEVEL_HIGH/Level1 mode). The software may receive an additional IRQ if the peripheral triggers one after the software clears the APLIC IRQ but before it clears the peripheral's IRQ. Thus, we also clear the pending bit via the rectified input value in the level-trigger mode. This change doesn't affect MSI delivery mode. Calling riscv_aplic_msi_irq_update() when IRQ pending is low will do nothing. Signed-off-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Chao Liu <chao.liu.zevorn@gmail.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260428160103.3551125-2-jim.shu@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/intc/riscv_aplic.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/hw/intc/riscv_aplic.c b/hw/intc/riscv_aplic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/riscv_aplic.c +++ b/hw/intc/riscv_aplic.c @@ -XXX,XX +XXX,XX @@ static void riscv_aplic_request(void *opaque, int irq, int level) } break; case APLIC_SOURCECFG_SM_LEVEL_HIGH: - if ((level > 0) && !(state & APLIC_ISTATE_PENDING)) { - riscv_aplic_set_pending_raw(aplic, irq, true); + if ((level > 0) != !!(state & APLIC_ISTATE_PENDING)) { + riscv_aplic_set_pending_raw(aplic, irq, level > 0); update = true; } break; case APLIC_SOURCECFG_SM_LEVEL_LOW: - if ((level <= 0) && !(state & APLIC_ISTATE_PENDING)) { - riscv_aplic_set_pending_raw(aplic, irq, true); + if ((level <= 0) != !!(state & APLIC_ISTATE_PENDING)) { + riscv_aplic_set_pending_raw(aplic, irq, level <= 0); update = true; } break; -- 2.53.0 From: Jim Shu <jim.shu@sifive.com> Clearing APLIC registers and qemu_irq in the reset function Signed-off-by: Jim Shu <jim.shu@sifive.com> Signed-off-by: Fea.Wang <fea.wang@sifive.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260428160103.3551125-3-jim.shu@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/intc/riscv_aplic.c | 45 ++++++++++++++++++++++++++++++++++++++----- 1 file changed, 40 insertions(+), 5 deletions(-) diff --git a/hw/intc/riscv_aplic.c b/hw/intc/riscv_aplic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/riscv_aplic.c +++ b/hw/intc/riscv_aplic.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps riscv_aplic_ops = { } }; +static void riscv_aplic_reset_enter(Object *obj, ResetType type) +{ + RISCVAPLICState *aplic = RISCV_APLIC(obj); + int i; + + aplic->domaincfg = 0; + memset(aplic->sourcecfg, 0, sizeof(uint32_t) * aplic->num_irqs); + memset(aplic->target, 0, sizeof(uint32_t) * aplic->num_irqs); + if (!aplic->msimode) { + for (i = 0; i < aplic->num_irqs; i++) { + aplic->target[i] = 1; + } + } + + for (i = 0; i < aplic->num_irqs ; i++) { + riscv_aplic_set_enabled_raw(aplic, i, false); + } + + /* Need to unlock [ms]msicfgaddrh.L */ + aplic->mmsicfgaddr = 0; + aplic->mmsicfgaddrH = 0; + aplic->smsicfgaddr = 0; + aplic->smsicfgaddrH = 0; + + if (!aplic->msimode) { + /* Reset IDC registers only in non-MSI mode */ + for (i = 0; i < aplic->num_harts; i++) { + aplic->idelivery[i] = 0; + aplic->iforce[i] = 0; + aplic->ithreshold[i] = 0; + } + + for (i = 0; i < aplic->num_harts; i++) { + qemu_irq_lower(aplic->external_irqs[i]); + } + } +} + static void riscv_aplic_realize(DeviceState *dev, Error **errp) { uint32_t i; @@ -XXX,XX +XXX,XX @@ static void riscv_aplic_realize(DeviceState *dev, Error **errp) aplic->sourcecfg = g_new0(uint32_t, aplic->num_irqs); aplic->state = g_new0(uint32_t, aplic->num_irqs); aplic->target = g_new0(uint32_t, aplic->num_irqs); - if (!aplic->msimode) { - for (i = 0; i < aplic->num_irqs; i++) { - aplic->target[i] = 1; - } - } aplic->idelivery = g_new0(uint32_t, aplic->num_harts); aplic->iforce = g_new0(uint32_t, aplic->num_harts); aplic->ithreshold = g_new0(uint32_t, aplic->num_harts); @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_riscv_aplic = { static void riscv_aplic_class_init(ObjectClass *klass, const void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); device_class_set_props(dc, riscv_aplic_properties); dc->realize = riscv_aplic_realize; + rc->phases.enter = riscv_aplic_reset_enter; dc->vmsd = &vmstate_riscv_aplic; } -- 2.53.0 From: Jim Shu <jim.shu@sifive.com> Clearing IMSIC registers and qemu_irq in the reset function Signed-off-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260428160103.3551125-4-jim.shu@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/intc/riscv_imsic.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/hw/intc/riscv_imsic.c b/hw/intc/riscv_imsic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/riscv_imsic.c +++ b/hw/intc/riscv_imsic.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps riscv_imsic_ops = { } }; +static void riscv_imsic_reset_enter(Object *obj, ResetType type) +{ + RISCVIMSICState *imsic = RISCV_IMSIC(obj); + int i; + + memset(imsic->eidelivery, 0, sizeof(uint32_t) * imsic->num_pages); + memset(imsic->eithreshold, 0, sizeof(uint32_t) * imsic->num_pages); + + for (i = 0; i < imsic->num_eistate; i++) { + imsic->eistate[i] &= ~IMSIC_EISTATE_ENABLED; + } + + for (i = 0; i < imsic->num_pages; i++) { + qemu_irq_lower(imsic->external_irqs[i]); + } +} + static void riscv_imsic_realize(DeviceState *dev, Error **errp) { RISCVIMSICState *imsic = RISCV_IMSIC(dev); @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_riscv_imsic = { static void riscv_imsic_class_init(ObjectClass *klass, const void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); device_class_set_props(dc, riscv_imsic_properties); dc->realize = riscv_imsic_realize; + rc->phases.enter = riscv_imsic_reset_enter; dc->vmsd = &vmstate_riscv_imsic; } -- 2.53.0 From: Jim Shu <jim.shu@sifive.com> Add the trace events for APLIC read/write functions. Signed-off-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Message-ID: <20260428160103.3551125-5-jim.shu@sifive.com> [ Changes by AF: - Init val to zero to avoid uninitialised build errors ] Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/intc/riscv_aplic.c | 63 ++++++++++++++++++++++++++----------------- hw/intc/trace-events | 4 +++ 2 files changed, 42 insertions(+), 25 deletions(-) diff --git a/hw/intc/riscv_aplic.c b/hw/intc/riscv_aplic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/riscv_aplic.c +++ b/hw/intc/riscv_aplic.c @@ -XXX,XX +XXX,XX @@ #include "system/tcg.h" #include "kvm/kvm_riscv.h" #include "migration/vmstate.h" +#include "trace.h" #define APLIC_MAX_IDC (1UL << 14) #define APLIC_MAX_SOURCE 1024 @@ -XXX,XX +XXX,XX @@ static void riscv_aplic_request(void *opaque, int irq, int level) static uint64_t riscv_aplic_read(void *opaque, hwaddr addr, unsigned size) { uint32_t irq, word, idc; + uint64_t val = 0; RISCVAPLICState *aplic = opaque; /* Reads must be 4 byte words */ @@ -XXX,XX +XXX,XX @@ static uint64_t riscv_aplic_read(void *opaque, hwaddr addr, unsigned size) } if (addr == APLIC_DOMAINCFG) { - return APLIC_DOMAINCFG_RDONLY | aplic->domaincfg | - (aplic->msimode ? APLIC_DOMAINCFG_DM : 0); + val = APLIC_DOMAINCFG_RDONLY | aplic->domaincfg | + (aplic->msimode ? APLIC_DOMAINCFG_DM : 0); } else if ((APLIC_SOURCECFG_BASE <= addr) && (addr < (APLIC_SOURCECFG_BASE + (aplic->num_irqs - 1) * 4))) { irq = ((addr - APLIC_SOURCECFG_BASE) >> 2) + 1; - return aplic->sourcecfg[irq]; + val = aplic->sourcecfg[irq]; } else if (aplic->mmode && aplic->msimode && (addr == APLIC_MMSICFGADDR)) { - return aplic->mmsicfgaddr; + val = aplic->mmsicfgaddr; } else if (aplic->mmode && aplic->msimode && (addr == APLIC_MMSICFGADDRH)) { - return aplic->mmsicfgaddrH; + val = aplic->mmsicfgaddrH; } else if (aplic->mmode && aplic->msimode && (addr == APLIC_SMSICFGADDR)) { /* @@ -XXX,XX +XXX,XX @@ static uint64_t riscv_aplic_read(void *opaque, hwaddr addr, unsigned size) * only zero in at least one of the supervisor-level child * domains). */ - return (aplic->num_children) ? aplic->smsicfgaddr : 0; + val = (aplic->num_children) ? aplic->smsicfgaddr : 0; } else if (aplic->mmode && aplic->msimode && (addr == APLIC_SMSICFGADDRH)) { - return (aplic->num_children) ? aplic->smsicfgaddrH : 0; + val = (aplic->num_children) ? aplic->smsicfgaddrH : 0; } else if ((APLIC_SETIP_BASE <= addr) && (addr < (APLIC_SETIP_BASE + aplic->bitfield_words * 4))) { word = (addr - APLIC_SETIP_BASE) >> 2; - return riscv_aplic_read_pending_word(aplic, word); + val = riscv_aplic_read_pending_word(aplic, word); } else if (addr == APLIC_SETIPNUM) { - return 0; + val = 0; } else if ((APLIC_CLRIP_BASE <= addr) && (addr < (APLIC_CLRIP_BASE + aplic->bitfield_words * 4))) { word = (addr - APLIC_CLRIP_BASE) >> 2; - return riscv_aplic_read_input_word(aplic, word); + val = riscv_aplic_read_input_word(aplic, word); } else if (addr == APLIC_CLRIPNUM) { - return 0; + val = 0; } else if ((APLIC_SETIE_BASE <= addr) && (addr < (APLIC_SETIE_BASE + aplic->bitfield_words * 4))) { word = (addr - APLIC_SETIE_BASE) >> 2; - return riscv_aplic_read_enabled_word(aplic, word); + val = riscv_aplic_read_enabled_word(aplic, word); } else if (addr == APLIC_SETIENUM) { - return 0; + val = 0; } else if ((APLIC_CLRIE_BASE <= addr) && (addr < (APLIC_CLRIE_BASE + aplic->bitfield_words * 4))) { - return 0; + val = 0; } else if (addr == APLIC_CLRIENUM) { - return 0; + val = 0; } else if (addr == APLIC_SETIPNUM_LE) { - return 0; + val = 0; } else if (addr == APLIC_SETIPNUM_BE) { - return 0; + val = 0; } else if (addr == APLIC_GENMSI) { - return (aplic->msimode) ? aplic->genmsi : 0; + val = (aplic->msimode) ? aplic->genmsi : 0; } else if ((APLIC_TARGET_BASE <= addr) && (addr < (APLIC_TARGET_BASE + (aplic->num_irqs - 1) * 4))) { irq = ((addr - APLIC_TARGET_BASE) >> 2) + 1; if (!riscv_aplic_source_active(aplic, irq)) { - return 0; + val = 0; + } else { + val = aplic->target[irq]; } - return aplic->target[irq]; } else if (!aplic->msimode && (APLIC_IDC_BASE <= addr) && (addr < (APLIC_IDC_BASE + aplic->num_harts * APLIC_IDC_SIZE))) { idc = (addr - APLIC_IDC_BASE) / APLIC_IDC_SIZE; switch (addr - (APLIC_IDC_BASE + idc * APLIC_IDC_SIZE)) { case APLIC_IDC_IDELIVERY: - return aplic->idelivery[idc]; + val = aplic->idelivery[idc]; + break; case APLIC_IDC_IFORCE: - return aplic->iforce[idc]; + val = aplic->iforce[idc]; + break; case APLIC_IDC_ITHRESHOLD: - return aplic->ithreshold[idc]; + val = aplic->ithreshold[idc]; + break; case APLIC_IDC_TOPI: - return riscv_aplic_idc_topi(aplic, idc); + val = riscv_aplic_idc_topi(aplic, idc); + break; case APLIC_IDC_CLAIMI: - return riscv_aplic_idc_claimi(aplic, idc); + val = riscv_aplic_idc_claimi(aplic, idc); + break; default: goto err; }; } + trace_riscv_aplic_read(addr, size, val); + return val; + err: qemu_log_mask(LOG_GUEST_ERROR, "%s: Invalid register read 0x%" HWADDR_PRIx "\n", @@ -XXX,XX +XXX,XX @@ static void riscv_aplic_write(void *opaque, hwaddr addr, uint64_t value, goto err; } + trace_riscv_aplic_write(addr, size, value); + if (addr == APLIC_DOMAINCFG) { /* Only IE bit writable at the moment */ value &= APLIC_DOMAINCFG_IE; diff --git a/hw/intc/trace-events b/hw/intc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/trace-events +++ b/hw/intc/trace-events @@ -XXX,XX +XXX,XX @@ loongarch_msi_set_irq(int irq_num) "set msi irq %d" loongarch_extioi_setirq(int irq, int level) "set extirq irq %d level %d" loongarch_extioi_readw(uint64_t addr, uint64_t val) "addr: 0x%"PRIx64 "val: 0x%" PRIx64 loongarch_extioi_writew(uint64_t addr, uint64_t val) "addr: 0x%"PRIx64 "val: 0x%" PRIx64 + +# riscv_aplic.c +riscv_aplic_read(uint64_t offset, unsigned size, uint64_t value) "offset: 0x%" PRIx64 ", size: %u, value: 0x%" PRIx64 +riscv_aplic_write(uint64_t offset, unsigned size, uint64_t value) "offset: 0x%" PRIx64 ", size: %u, value: 0x%" PRIx64 -- 2.53.0 From: Jay Chang <jay.chang@sifive.com> When software clears CMD_ILL or CQMF error bits by writing 1 to CQCSR, the IOMMU should re-check the command queue and continue processing pending commands if head != tail. Per RISC-V IOMMU specification : If command-queue access leads to a memory fault then the command-queue-memory-fault bit is set to 1 and the commandqueue stalls until this bit is cleared. To re-enable command processing, software should clear this bit by writing 1. Signed-off-by: Jay Chang <jay.chang@sifive.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com> Reviewed-by: Nutty Liu <nutty.liu@hotmail.com> Message-ID: <20260518070143.8405-1-jay.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/riscv-iommu.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/hw/riscv/riscv-iommu.c b/hw/riscv/riscv-iommu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/riscv-iommu.c +++ b/hw/riscv/riscv-iommu.c @@ -XXX,XX +XXX,XX @@ static void riscv_iommu_process_cq_control(RISCVIOMMUState *s) } riscv_iommu_reg_mod32(s, RISCV_IOMMU_REG_CQCSR, ctrl_set, ctrl_clr); + + /* + * After clearing error bits (CMD_ILL, CQMF), if queue is still active, + * re-process pending command. + */ + ctrl_set = riscv_iommu_reg_get32(s, RISCV_IOMMU_REG_CQCSR); + if ((ctrl_set & RISCV_IOMMU_CQCSR_CQON) && + !(ctrl_set & (RISCV_IOMMU_CQCSR_CMD_ILL | RISCV_IOMMU_CQCSR_CQMF))) { + riscv_iommu_process_cq_tail(s); + } } static void riscv_iommu_process_fq_control(RISCVIOMMUState *s) -- 2.53.0