target-arm queue: nothing big, just a collection of minor things. -- PMM The following changes since commit ae3aa5da96f4ccf0c2a28851449d92db9fcfad71: Merge remote-tracking branch 'remotes/berrange/tags/socket-next-pull-request' into staging (2020-05-21 16:47:28 +0100) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20200521 for you to fetch changes up to 17b5df7b65d0192c5d775b5e1581518580774c77: linux-user/arm/signal.c: Drop TARGET_CONFIG_CPU_32 (2020-05-21 20:00:19 +0100) ---------------------------------------------------------------- target-arm queue: * tests/acceptance: Add a test for the canon-a1100 machine * docs/system: Document some of the Arm development boards * linux-user: make BKPT insn cause SIGTRAP, not be a syscall * target/arm: Remove unused GEN_NEON_INTEGER_OP macro * fsl-imx25, fsl-imx31, fsl-imx6, fsl-imx6ul, fsl-imx7: implement watchdog * hw/arm: Use qemu_log_mask() instead of hw_error() in various places * ARM: PL061: Introduce N_GPIOS * target/arm: Improve clear_vec_high() usage * target/arm: Allow user-mode code to write CPSR.E via MSR * linux-user/arm: Reset CPSR_E when entering a signal handler * linux-user/arm/signal.c: Drop TARGET_CONFIG_CPU_32 ---------------------------------------------------------------- Amanieu d'Antras (1): linux-user/arm: Reset CPSR_E when entering a signal handler Geert Uytterhoeven (1): ARM: PL061: Introduce N_GPIOS Guenter Roeck (8): hw: Move i.MX watchdog driver to hw/watchdog hw/watchdog: Implement full i.MX watchdog support hw/arm/fsl-imx25: Wire up watchdog hw/arm/fsl-imx31: Wire up watchdog hw/arm/fsl-imx6: Connect watchdog interrupts hw/arm/fsl-imx6ul: Connect watchdog interrupts hw/arm/fsl-imx7: Instantiate various unimplemented devices hw/arm/fsl-imx7: Connect watchdog interrupts Peter Maydell (12): docs/system: Add 'Arm' to the Integrator/CP document title docs/system: Sort Arm board index into alphabetical order docs/system: Document Arm Versatile Express boards docs/system: Document the various MPS2 models docs/system: Document Musca boards linux-user/arm: BKPT should cause SIGTRAP, not be a syscall linux-user/arm: Remove bogus SVC 0xf0002 handling linux-user/arm: Handle invalid arm-specific syscalls correctly linux-user/arm: Fix identification of syscall numbers target/arm: Remove unused GEN_NEON_INTEGER_OP macro target/arm: Allow user-mode code to write CPSR.E via MSR linux-user/arm/signal.c: Drop TARGET_CONFIG_CPU_32 Philippe Mathieu-Daudé (4): hw/arm/integratorcp: Replace hw_error() by qemu_log_mask() hw/arm/pxa2xx: Replace hw_error() by qemu_log_mask() hw/char/xilinx_uartlite: Replace hw_error() by qemu_log_mask() hw/timer/exynos4210_mct: Replace hw_error() by qemu_log_mask() Richard Henderson (2): target/arm: Use tcg_gen_gvec_mov for clear_vec_high target/arm: Use clear_vec_high more effectively Thomas Huth (1): tests/acceptance: Add a test for the canon-a1100 machine docs/system/arm/integratorcp.rst | 4 +- docs/system/arm/mps2.rst | 29 +++ docs/system/arm/musca.rst | 31 +++ docs/system/arm/vexpress.rst | 60 ++++++ docs/system/target-arm.rst | 20 +- include/hw/arm/fsl-imx25.h | 5 + include/hw/arm/fsl-imx31.h | 4 + include/hw/arm/fsl-imx6.h | 2 +- include/hw/arm/fsl-imx6ul.h | 2 +- include/hw/arm/fsl-imx7.h | 23 ++- include/hw/misc/imx2_wdt.h | 33 ---- include/hw/watchdog/wdt_imx2.h | 90 +++++++++ target/arm/cpu.h | 2 +- hw/arm/fsl-imx25.c | 10 + hw/arm/fsl-imx31.c | 6 + hw/arm/fsl-imx6.c | 9 + hw/arm/fsl-imx6ul.c | 10 + hw/arm/fsl-imx7.c | 35 ++++ hw/arm/integratorcp.c | 23 ++- hw/arm/pxa2xx_gpio.c | 7 +- hw/char/xilinx_uartlite.c | 5 +- hw/display/pxa2xx_lcd.c | 8 +- hw/dma/pxa2xx_dma.c | 14 +- hw/gpio/pl061.c | 12 +- hw/misc/imx2_wdt.c | 90 --------- hw/timer/exynos4210_mct.c | 12 +- hw/watchdog/wdt_imx2.c | 303 +++++++++++++++++++++++++++++ linux-user/arm/cpu_loop.c | 145 ++++++++------ linux-user/arm/signal.c | 15 +- target/arm/translate-a64.c | 63 +++--- target/arm/translate.c | 23 --- MAINTAINERS | 6 + hw/arm/Kconfig | 5 + hw/misc/Makefile.objs | 1 - hw/watchdog/Kconfig | 3 + hw/watchdog/Makefile.objs | 1 + tests/acceptance/machine_arm_canona1100.py | 35 ++++ 37 files changed, 854 insertions(+), 292 deletions(-) create mode 100644 docs/system/arm/mps2.rst create mode 100644 docs/system/arm/musca.rst create mode 100644 docs/system/arm/vexpress.rst delete mode 100644 include/hw/misc/imx2_wdt.h create mode 100644 include/hw/watchdog/wdt_imx2.h delete mode 100644 hw/misc/imx2_wdt.c create mode 100644 hw/watchdog/wdt_imx2.c create mode 100644 tests/acceptance/machine_arm_canona1100.py From: Thomas Huth <thuth@redhat.com> The canon-a1100 machine can be used with the Barebox firmware. The QEMU Advent Calendar 2018 features a pre-compiled image which we can use for testing. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200514190422.23645-1-f4bug@amsat.org Message-Id: <20200129090420.13954-1-thuth@redhat.com> [PMD: Rebased MAINTAINERS] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 1 + tests/acceptance/machine_arm_canona1100.py | 35 ++++++++++++++++++++++ 2 files changed, 36 insertions(+) create mode 100644 tests/acceptance/machine_arm_canona1100.py diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ S: Odd Fixes F: include/hw/arm/digic.h F: hw/*/digic* F: include/hw/*/digic* +F: tests/acceptance/machine_arm_canona1100.py Goldfish RTC M: Anup Patel <anup.patel@wdc.com> diff --git a/tests/acceptance/machine_arm_canona1100.py b/tests/acceptance/machine_arm_canona1100.py new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/acceptance/machine_arm_canona1100.py @@ -XXX,XX +XXX,XX @@ +# Functional test that boots the canon-a1100 machine with firmware +# +# Copyright (c) 2020 Red Hat, Inc. +# +# Author: +# Thomas Huth <thuth@redhat.com> +# +# This work is licensed under the terms of the GNU GPL, version 2 or +# later. See the COPYING file in the top-level directory. + +from avocado_qemu import Test +from avocado_qemu import wait_for_console_pattern +from avocado.utils import archive + +class CanonA1100Machine(Test): + """Boots the barebox firmware and checks that the console is operational""" + + timeout = 90 + + def test_arm_canona1100(self): + """ + :avocado: tags=arch:arm + :avocado: tags=machine:canon-a1100 + :avocado: tags=device:pflash_cfi02 + """ + tar_url = ('https://www.qemu-advent-calendar.org' + '/2018/download/day18.tar.xz') + tar_hash = '068b5fc4242b29381acee94713509f8a876e9db6' + file_path = self.fetch_asset(tar_url, asset_hash=tar_hash) + archive.extract(file_path, self.workdir) + self.vm.set_console() + self.vm.add_args('-bios', + self.workdir + '/day18/barebox.canon-a1100.bin') + self.vm.launch() + wait_for_console_pattern(self, 'running /env/bin/init') -- 2.20.1 Add 'Arm' to the Integrator/CP document title, for consistency with the titling of the other documentation of Arm devboard models (versatile, realview). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200507151819.28444-2-peter.maydell@linaro.org --- docs/system/arm/integratorcp.rst | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/docs/system/arm/integratorcp.rst b/docs/system/arm/integratorcp.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/integratorcp.rst +++ b/docs/system/arm/integratorcp.rst @@ -XXX,XX +XXX,XX @@ -Integrator/CP (``integratorcp``) -================================ +Arm Integrator/CP (``integratorcp``) +==================================== The Arm Integrator/CP board is emulated with the following devices: -- 2.20.1 Sort the board index into alphabetical order. (Note that we need to sort alphabetically by the title text of each file, which isn't the same ordering as sorting by the filename.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200507151819.28444-3-peter.maydell@linaro.org --- docs/system/target-arm.rst | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/target-arm.rst +++ b/docs/system/target-arm.rst @@ -XXX,XX +XXX,XX @@ Unfortunately many of the Arm boards QEMU supports are currently undocumented; you can get a complete list by running ``qemu-system-aarch64 --machine help``. +.. + This table of contents should be kept sorted alphabetically + by the title text of each file, which isn't the same ordering + as an alphabetical sort by filename. + .. toctree:: :maxdepth: 1 arm/integratorcp - arm/versatile arm/realview - arm/xscale - arm/palm - arm/nseries - arm/stellaris + arm/versatile arm/musicpal - arm/sx1 + arm/nseries arm/orangepi + arm/palm + arm/xscale + arm/sx1 + arm/stellaris Arm CPU features ================ -- 2.20.1 Provide a minimal documentation of the Versatile Express boards (vexpress-a9, vexpress-a15). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200507151819.28444-4-peter.maydell@linaro.org --- docs/system/arm/vexpress.rst | 60 ++++++++++++++++++++++++++++++++++++ docs/system/target-arm.rst | 1 + MAINTAINERS | 1 + 3 files changed, 62 insertions(+) create mode 100644 docs/system/arm/vexpress.rst diff --git a/docs/system/arm/vexpress.rst b/docs/system/arm/vexpress.rst new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/docs/system/arm/vexpress.rst @@ -XXX,XX +XXX,XX @@ +Arm Versatile Express boards (``vexpress-a9``, ``vexpress-a15``) +================================================================ + +QEMU models two variants of the Arm Versatile Express development +board family: + +- ``vexpress-a9`` models the combination of the Versatile Express + motherboard and the CoreTile Express A9x4 daughterboard +- ``vexpress-a15`` models the combination of the Versatile Express + motherboard and the CoreTile Express A15x2 daughterboard + +Note that as this hardware does not have PCI, IDE or SCSI, +the only available storage option is emulated SD card. + +Implemented devices: + +- PL041 audio +- PL181 SD controller +- PL050 keyboard and mouse +- PL011 UARTs +- SP804 timers +- I2C controller +- PL031 RTC +- PL111 LCD display controller +- Flash memory +- LAN9118 ethernet + +Unimplemented devices: + +- SP810 system control block +- PCI-express +- USB controller (Philips ISP1761) +- Local DAP ROM +- CoreSight interfaces +- PL301 AXI interconnect +- SCC +- System counter +- HDLCD controller (``vexpress-a15``) +- SP805 watchdog +- PL341 dynamic memory controller +- DMA330 DMA controller +- PL354 static memory controller +- BP147 TrustZone Protection Controller +- TrustZone Address Space Controller + +Other differences between the hardware and the QEMU model: + +- QEMU will default to creating one CPU unless you pass a different + ``-smp`` argument +- QEMU allows the amount of RAM provided to be specified with the + ``-m`` argument +- QEMU defaults to providing a CPU which does not provide either + TrustZone or the Virtualization Extensions: if you want these you + must enable them with ``-machine secure=on`` and ``-machine + virtualization=on`` +- QEMU provides 4 virtio-mmio virtio transports; these start at + address ``0x10013000`` for ``vexpress-a9`` and at ``0x1c130000`` for + ``vexpress-a15``, and have IRQs from 40 upwards. If a dtb is + provided on the command line then QEMU will edit it to include + suitable entries describing these transports for the guest. diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/target-arm.rst +++ b/docs/system/target-arm.rst @@ -XXX,XX +XXX,XX @@ undocumented; you can get a complete list by running arm/integratorcp arm/realview arm/versatile + arm/vexpress arm/musicpal arm/nseries arm/orangepi diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ M: Peter Maydell <peter.maydell@linaro.org> L: qemu-arm@nongnu.org S: Maintained F: hw/arm/vexpress.c +F: docs/system/arm/vexpress.rst Versatile PB M: Peter Maydell <peter.maydell@linaro.org> -- 2.20.1 Add basic documentation of the MPS2 board models. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200507151819.28444-5-peter.maydell@linaro.org --- docs/system/arm/mps2.rst | 29 +++++++++++++++++++++++++++++ docs/system/target-arm.rst | 1 + MAINTAINERS | 1 + 3 files changed, 31 insertions(+) create mode 100644 docs/system/arm/mps2.rst diff --git a/docs/system/arm/mps2.rst b/docs/system/arm/mps2.rst new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/docs/system/arm/mps2.rst @@ -XXX,XX +XXX,XX @@ +Arm MPS2 boards (``mps2-an385``, ``mps2-an505``, ``mps2-an511``, ``mps2-an521``) +================================================================================ + +These board models all use Arm M-profile CPUs. + +The Arm MPS2 and MPS2+ dev boards are FPGA based (the 2+ has a bigger +FPGA but is otherwise the same as the 2). Since the CPU itself +and most of the devices are in the FPGA, the details of the board +as seen by the guest depend significantly on the FPGA image. + +QEMU models the following FPGA images: + +``mps2-an385`` + Cortex-M3 as documented in ARM Application Note AN385 +``mps2-an511`` + Cortex-M3 'DesignStart' as documented in AN511 +``mps2-an505`` + Cortex-M33 as documented in ARM Application Note AN505 +``mps2-an521`` + Dual Cortex-M33 as documented in Application Note AN521 + +Differences between QEMU and real hardware: + +- AN385 remapping of low 16K of memory to either ZBT SSRAM1 or to + block RAM is unimplemented (QEMU always maps this to ZBT SSRAM1, as + if zbt_boot_ctrl is always zero) +- QEMU provides a LAN9118 ethernet rather than LAN9220; the only guest + visible difference is that the LAN9118 doesn't support checksum + offloading diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/target-arm.rst +++ b/docs/system/target-arm.rst @@ -XXX,XX +XXX,XX @@ undocumented; you can get a complete list by running :maxdepth: 1 arm/integratorcp + arm/mps2 arm/realview arm/versatile arm/vexpress diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/misc/armsse-cpuid.c F: include/hw/misc/armsse-cpuid.h F: hw/misc/armsse-mhu.c F: include/hw/misc/armsse-mhu.h +F: docs/system/arm/mps2.rst Musca M: Peter Maydell <peter.maydell@linaro.org> -- 2.20.1 Provide a minimal documentation of the Musca boards. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200507151819.28444-6-peter.maydell@linaro.org --- docs/system/arm/musca.rst | 31 +++++++++++++++++++++++++++++++ docs/system/target-arm.rst | 1 + MAINTAINERS | 1 + 3 files changed, 33 insertions(+) create mode 100644 docs/system/arm/musca.rst diff --git a/docs/system/arm/musca.rst b/docs/system/arm/musca.rst new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/docs/system/arm/musca.rst @@ -XXX,XX +XXX,XX @@ +Arm Musca boards (``musca-a``, ``musca-b1``) +============================================ + +The Arm Musca development boards are a reference implementation +of a system using the SSE-200 Subsystem for Embedded. They are +dual Cortex-M33 systems. + +QEMU provides models of the A and B1 variants of this board. + +Unimplemented devices: + +- SPI +- |I2C| +- |I2S| +- PWM +- QSPI +- Timer +- SCC +- GPIO +- eFlash +- MHU +- PVT +- SDIO +- CryptoCell + +Note that (like the real hardware) the Musca-A machine is +asymmetric: CPU 0 does not have the FPU or DSP extensions, +but CPU 1 does. Also like the real hardware, the memory maps +for the A and B1 variants differ significantly, so guest +software must be built for the right variant. + diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/target-arm.rst +++ b/docs/system/target-arm.rst @@ -XXX,XX +XXX,XX @@ undocumented; you can get a complete list by running arm/integratorcp arm/mps2 + arm/musca arm/realview arm/versatile arm/vexpress diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ M: Peter Maydell <peter.maydell@linaro.org> L: qemu-arm@nongnu.org S: Maintained F: hw/arm/musca.c +F: docs/system/arm/musca.rst Musicpal M: Jan Kiszka <jan.kiszka@web.de> -- 2.20.1 In linux-user/arm/cpu-loop.c we incorrectly treat EXCP_BKPT similarly to EXCP_SWI, which means that if the guest executes a BKPT insn then QEMU will perform a syscall for it (which syscall depends on what value happens to be in r7...). The correct behaviour is that the guest process should take a SIGTRAP. This code has been like this (more or less) since commit 06c949e62a098f in 2006 which added BKPT in the first place. This is probably because at the time the same code path was used to handle both Linux syscalls and semihosting calls, and (on M profile) BKPT with a suitable magic number is used for semihosting calls. But these days we've moved handling of semihosting out to an entirely different codepath, so we can fix this bug by simply removing this handling of EXCP_BKPT and instead making it deliver a SIGTRAP like EXCP_DEBUG (as we do already on aarch64). Reported-by: <omerg681@gmail.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200420212206.12776-2-peter.maydell@linaro.org Fixes: https://bugs.launchpad.net/qemu/+bug/1873898 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/arm/cpu_loop.c | 30 ++++++++---------------------- 1 file changed, 8 insertions(+), 22 deletions(-) diff --git a/linux-user/arm/cpu_loop.c b/linux-user/arm/cpu_loop.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/arm/cpu_loop.c +++ b/linux-user/arm/cpu_loop.c @@ -XXX,XX +XXX,XX @@ void cpu_loop(CPUARMState *env) } break; case EXCP_SWI: - case EXCP_BKPT: { env->eabi = 1; /* system call */ - if (trapnr == EXCP_BKPT) { - if (env->thumb) { - /* FIXME - what to do if get_user() fails? */ - get_user_code_u16(insn, env->regs[15], env); - n = insn & 0xff; - env->regs[15] += 2; - } else { - /* FIXME - what to do if get_user() fails? */ - get_user_code_u32(insn, env->regs[15], env); - n = (insn & 0xf) | ((insn >> 4) & 0xff0); - env->regs[15] += 4; - } + if (env->thumb) { + /* FIXME - what to do if get_user() fails? */ + get_user_code_u16(insn, env->regs[15] - 2, env); + n = insn & 0xff; } else { - if (env->thumb) { - /* FIXME - what to do if get_user() fails? */ - get_user_code_u16(insn, env->regs[15] - 2, env); - n = insn & 0xff; - } else { - /* FIXME - what to do if get_user() fails? */ - get_user_code_u32(insn, env->regs[15] - 4, env); - n = insn & 0xffffff; - } + /* FIXME - what to do if get_user() fails? */ + get_user_code_u32(insn, env->regs[15] - 4, env); + n = insn & 0xffffff; } if (n == ARM_NR_cacheflush) { @@ -XXX,XX +XXX,XX @@ void cpu_loop(CPUARMState *env) } break; case EXCP_DEBUG: + case EXCP_BKPT: excp_debug: info.si_signo = TARGET_SIGTRAP; info.si_errno = 0; -- 2.20.1 We incorrectly treat SVC 0xf0002 as a cacheflush request (which is a NOP for QEMU). This is the wrong syscall number, because in the svc-immediate OABI syscall numbers are all offset by the ARM_SYSCALL_BASE value and so the correct insn is SVC 0x9f0002. (This is handled further down in the code with the other Arm-specific syscalls like NR_breakpoint.) When this code was initially added in commit 6f1f31c069b20611 in 2004, ARM_NR_cacheflush was defined as (ARM_SYSCALL_BASE + 0xf0000 + 2) so the value in the comparison took account of the extra 0x900000 offset. In commit fbb4a2e371f2fa7 in 2008, the ARM_SYSCALL_BASE was removed from the definition of ARM_NR_cacheflush and handling for this group of syscalls was added below the point where we subtract ARM_SYSCALL_BASE from the SVC immediate value. However that commit forgot to remove the now-obsolete earlier handling code. Remove the spurious ARM_NR_cacheflush condition. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20200420212206.12776-3-peter.maydell@linaro.org --- linux-user/arm/cpu_loop.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/linux-user/arm/cpu_loop.c b/linux-user/arm/cpu_loop.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/arm/cpu_loop.c +++ b/linux-user/arm/cpu_loop.c @@ -XXX,XX +XXX,XX @@ void cpu_loop(CPUARMState *env) n = insn & 0xffffff; } - if (n == ARM_NR_cacheflush) { - /* nop */ - } else if (n == 0 || n >= ARM_SYSCALL_BASE || env->thumb) { + if (n == 0 || n >= ARM_SYSCALL_BASE || env->thumb) { /* linux syscall */ if (env->thumb || n == 0) { n = env->regs[7]; -- 2.20.1 The kernel has different handling for syscalls with invalid numbers that are in the "arm-specific" range 0x9f0000 and up: * 0x9f0000..0x9f07ff return -ENOSYS if not implemented * other out of range syscalls cause a SIGILL (see the kernel's arch/arm/kernel/traps.c:arm_syscall()) Implement this distinction. (Note that our code doesn't look quite like the kernel's, because we have removed the 0x900000 prefix by this point, whereas the kernel retains it in arm_syscall().) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200420212206.12776-4-peter.maydell@linaro.org --- linux-user/arm/cpu_loop.c | 30 ++++++++++++++++++++++++++---- 1 file changed, 26 insertions(+), 4 deletions(-) diff --git a/linux-user/arm/cpu_loop.c b/linux-user/arm/cpu_loop.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/arm/cpu_loop.c +++ b/linux-user/arm/cpu_loop.c @@ -XXX,XX +XXX,XX @@ void cpu_loop(CPUARMState *env) env->regs[0] = cpu_get_tls(env); break; default: - qemu_log_mask(LOG_UNIMP, - "qemu: Unsupported ARM syscall: 0x%x\n", - n); - env->regs[0] = -TARGET_ENOSYS; + if (n < 0xf0800) { + /* + * Syscalls 0xf0000..0xf07ff (or 0x9f0000.. + * 0x9f07ff in OABI numbering) are defined + * to return -ENOSYS rather than raising + * SIGILL. Note that we have already + * removed the 0x900000 prefix. + */ + qemu_log_mask(LOG_UNIMP, + "qemu: Unsupported ARM syscall: 0x%x\n", + n); + env->regs[0] = -TARGET_ENOSYS; + } else { + /* Otherwise SIGILL */ + info.si_signo = TARGET_SIGILL; + info.si_errno = 0; + info.si_code = TARGET_ILL_ILLTRP; + info._sifields._sigfault._addr = env->regs[15]; + if (env->thumb) { + info._sifields._sigfault._addr -= 2; + } else { + info._sifields._sigfault._addr -= 4; + } + queue_signal(env, info.si_signo, + QEMU_SI_FAULT, &info); + } break; } } else { -- 2.20.1 Our code to identify syscall numbers has some issues: * for Thumb mode, we never need the immediate value from the insn, but we always read it anyway * bad immediate values in the svc insn should cause a SIGILL, but we were abort()ing instead (via "goto error") We can fix both these things by refactoring the code that identifies the syscall number to more closely follow the kernel COMPAT_OABI code: * for Thumb it is always r7 * for Arm, if the immediate value is 0, then this is an EABI call with the syscall number in r7 * otherwise, we XOR the immediate value with 0x900000 (ARM_SYSCALL_BASE for QEMU; __NR_OABI_SYSCALL_BASE in the kernel), which converts valid syscall immediates into the desired value, and puts all invalid immediates in the range 0x100000 or above * then we can just let the existing "value too large, deliver SIGILL" case handle invalid numbers, and drop the 'goto error' Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20200420212206.12776-5-peter.maydell@linaro.org --- linux-user/arm/cpu_loop.c | 143 ++++++++++++++++++++------------------ 1 file changed, 77 insertions(+), 66 deletions(-) diff --git a/linux-user/arm/cpu_loop.c b/linux-user/arm/cpu_loop.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/arm/cpu_loop.c +++ b/linux-user/arm/cpu_loop.c @@ -XXX,XX +XXX,XX @@ void cpu_loop(CPUARMState *env) env->eabi = 1; /* system call */ if (env->thumb) { - /* FIXME - what to do if get_user() fails? */ - get_user_code_u16(insn, env->regs[15] - 2, env); - n = insn & 0xff; + /* Thumb is always EABI style with syscall number in r7 */ + n = env->regs[7]; } else { + /* + * Equivalent of kernel CONFIG_OABI_COMPAT: read the + * Arm SVC insn to extract the immediate, which is the + * syscall number in OABI. + */ /* FIXME - what to do if get_user() fails? */ get_user_code_u32(insn, env->regs[15] - 4, env); n = insn & 0xffffff; - } - - if (n == 0 || n >= ARM_SYSCALL_BASE || env->thumb) { - /* linux syscall */ - if (env->thumb || n == 0) { + if (n == 0) { + /* zero immediate: EABI, syscall number in r7 */ n = env->regs[7]; } else { - n -= ARM_SYSCALL_BASE; + /* + * This XOR matches the kernel code: an immediate + * in the valid range (0x900000 .. 0x9fffff) is + * converted into the correct EABI-style syscall + * number; invalid immediates end up as values + * > 0xfffff and are handled below as out-of-range. + */ + n ^= ARM_SYSCALL_BASE; env->eabi = 0; } - if ( n > ARM_NR_BASE) { - switch (n) { - case ARM_NR_cacheflush: - /* nop */ - break; - case ARM_NR_set_tls: - cpu_set_tls(env, env->regs[0]); - env->regs[0] = 0; - break; - case ARM_NR_breakpoint: - env->regs[15] -= env->thumb ? 2 : 4; - goto excp_debug; - case ARM_NR_get_tls: - env->regs[0] = cpu_get_tls(env); - break; - default: - if (n < 0xf0800) { - /* - * Syscalls 0xf0000..0xf07ff (or 0x9f0000.. - * 0x9f07ff in OABI numbering) are defined - * to return -ENOSYS rather than raising - * SIGILL. Note that we have already - * removed the 0x900000 prefix. - */ - qemu_log_mask(LOG_UNIMP, - "qemu: Unsupported ARM syscall: 0x%x\n", - n); - env->regs[0] = -TARGET_ENOSYS; + } + + if (n > ARM_NR_BASE) { + switch (n) { + case ARM_NR_cacheflush: + /* nop */ + break; + case ARM_NR_set_tls: + cpu_set_tls(env, env->regs[0]); + env->regs[0] = 0; + break; + case ARM_NR_breakpoint: + env->regs[15] -= env->thumb ? 2 : 4; + goto excp_debug; + case ARM_NR_get_tls: + env->regs[0] = cpu_get_tls(env); + break; + default: + if (n < 0xf0800) { + /* + * Syscalls 0xf0000..0xf07ff (or 0x9f0000.. + * 0x9f07ff in OABI numbering) are defined + * to return -ENOSYS rather than raising + * SIGILL. Note that we have already + * removed the 0x900000 prefix. + */ + qemu_log_mask(LOG_UNIMP, + "qemu: Unsupported ARM syscall: 0x%x\n", + n); + env->regs[0] = -TARGET_ENOSYS; + } else { + /* + * Otherwise SIGILL. This includes any SWI with + * immediate not originally 0x9fxxxx, because + * of the earlier XOR. + */ + info.si_signo = TARGET_SIGILL; + info.si_errno = 0; + info.si_code = TARGET_ILL_ILLTRP; + info._sifields._sigfault._addr = env->regs[15]; + if (env->thumb) { + info._sifields._sigfault._addr -= 2; } else { - /* Otherwise SIGILL */ - info.si_signo = TARGET_SIGILL; - info.si_errno = 0; - info.si_code = TARGET_ILL_ILLTRP; - info._sifields._sigfault._addr = env->regs[15]; - if (env->thumb) { - info._sifields._sigfault._addr -= 2; - } else { - info._sifields._sigfault._addr -= 4; - } - queue_signal(env, info.si_signo, - QEMU_SI_FAULT, &info); + info._sifields._sigfault._addr -= 4; } - break; - } - } else { - ret = do_syscall(env, - n, - env->regs[0], - env->regs[1], - env->regs[2], - env->regs[3], - env->regs[4], - env->regs[5], - 0, 0); - if (ret == -TARGET_ERESTARTSYS) { - env->regs[15] -= env->thumb ? 2 : 4; - } else if (ret != -TARGET_QEMU_ESIGRETURN) { - env->regs[0] = ret; + queue_signal(env, info.si_signo, + QEMU_SI_FAULT, &info); } + break; } } else { - goto error; + ret = do_syscall(env, + n, + env->regs[0], + env->regs[1], + env->regs[2], + env->regs[3], + env->regs[4], + env->regs[5], + 0, 0); + if (ret == -TARGET_ERESTARTSYS) { + env->regs[15] -= env->thumb ? 2 : 4; + } else if (ret != -TARGET_QEMU_ESIGRETURN) { + env->regs[0] = ret; + } } } break; -- 2.20.1 The GEN_NEON_INTEGER_OP macro is no longer used; remove it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> --- target/arm/translate.c | 23 ----------------------- 1 file changed, 23 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static inline void gen_neon_rsb(int size, TCGv_i32 t0, TCGv_i32 t1) default: return 1; \ }} while (0) -#define GEN_NEON_INTEGER_OP(name) do { \ - switch ((size << 1) | u) { \ - case 0: \ - gen_helper_neon_##name##_s8(tmp, tmp, tmp2); \ - break; \ - case 1: \ - gen_helper_neon_##name##_u8(tmp, tmp, tmp2); \ - break; \ - case 2: \ - gen_helper_neon_##name##_s16(tmp, tmp, tmp2); \ - break; \ - case 3: \ - gen_helper_neon_##name##_u16(tmp, tmp, tmp2); \ - break; \ - case 4: \ - gen_helper_neon_##name##_s32(tmp, tmp, tmp2); \ - break; \ - case 5: \ - gen_helper_neon_##name##_u32(tmp, tmp, tmp2); \ - break; \ - default: return 1; \ - }} while (0) - static TCGv_i32 neon_load_scratch(int scratch) { TCGv_i32 tmp = tcg_temp_new_i32(); -- 2.20.1 From: Guenter Roeck <linux@roeck-us.net> In preparation for a full implementation, move i.MX watchdog driver from hw/misc to hw/watchdog. While at it, add the watchdog files to MAINTAINERS. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200517162135.110364-2-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx6.h | 2 +- include/hw/arm/fsl-imx6ul.h | 2 +- include/hw/arm/fsl-imx7.h | 2 +- include/hw/{misc/imx2_wdt.h => watchdog/wdt_imx2.h} | 0 hw/{misc/imx2_wdt.c => watchdog/wdt_imx2.c} | 2 +- MAINTAINERS | 2 ++ hw/arm/Kconfig | 3 +++ hw/misc/Makefile.objs | 1 - hw/watchdog/Kconfig | 3 +++ hw/watchdog/Makefile.objs | 1 + 10 files changed, 13 insertions(+), 5 deletions(-) rename include/hw/{misc/imx2_wdt.h => watchdog/wdt_imx2.h} (100%) rename hw/{misc/imx2_wdt.c => watchdog/wdt_imx2.c} (98%) diff --git a/include/hw/arm/fsl-imx6.h b/include/hw/arm/fsl-imx6.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx6.h +++ b/include/hw/arm/fsl-imx6.h @@ -XXX,XX +XXX,XX @@ #include "hw/cpu/a9mpcore.h" #include "hw/misc/imx6_ccm.h" #include "hw/misc/imx6_src.h" -#include "hw/misc/imx2_wdt.h" +#include "hw/watchdog/wdt_imx2.h" #include "hw/char/imx_serial.h" #include "hw/timer/imx_gpt.h" #include "hw/timer/imx_epit.h" diff --git a/include/hw/arm/fsl-imx6ul.h b/include/hw/arm/fsl-imx6ul.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx6ul.h +++ b/include/hw/arm/fsl-imx6ul.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx7_gpr.h" #include "hw/intc/imx_gpcv2.h" -#include "hw/misc/imx2_wdt.h" +#include "hw/watchdog/wdt_imx2.h" #include "hw/gpio/imx_gpio.h" #include "hw/char/imx_serial.h" #include "hw/timer/imx_gpt.h" diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx7.h +++ b/include/hw/arm/fsl-imx7.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx7_gpr.h" #include "hw/misc/imx6_src.h" -#include "hw/misc/imx2_wdt.h" +#include "hw/watchdog/wdt_imx2.h" #include "hw/gpio/imx_gpio.h" #include "hw/char/imx_serial.h" #include "hw/timer/imx_gpt.h" diff --git a/include/hw/misc/imx2_wdt.h b/include/hw/watchdog/wdt_imx2.h similarity index 100% rename from include/hw/misc/imx2_wdt.h rename to include/hw/watchdog/wdt_imx2.h diff --git a/hw/misc/imx2_wdt.c b/hw/watchdog/wdt_imx2.c similarity index 98% rename from hw/misc/imx2_wdt.c rename to hw/watchdog/wdt_imx2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/imx2_wdt.c +++ b/hw/watchdog/wdt_imx2.c @@ -XXX,XX +XXX,XX @@ #include "qemu/module.h" #include "sysemu/watchdog.h" -#include "hw/misc/imx2_wdt.h" +#include "hw/watchdog/wdt_imx2.h" #define IMX2_WDT_WCR_WDA BIT(5) /* -> External Reset WDOG_B */ #define IMX2_WDT_WCR_SRS BIT(4) /* -> Software Reset Signal */ diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ S: Odd Fixes F: hw/arm/fsl-imx25.c F: hw/arm/imx25_pdk.c F: hw/misc/imx25_ccm.c +F: hw/watchdog/wdt_imx2.c F: include/hw/arm/fsl-imx25.h F: include/hw/misc/imx25_ccm.h +F: include/hw/watchdog/wdt_imx2.h i.MX31 (kzm) M: Peter Chubb <peter.chubb@nicta.com.au> diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX6 select IMX_FEC select IMX_I2C select IMX_USBPHY + select WDT_IMX2 select SDHCI config ASPEED_SOC @@ -XXX,XX +XXX,XX @@ config FSL_IMX7 select IMX select IMX_FEC select IMX_I2C + select WDT_IMX2 select PCI_EXPRESS_DESIGNWARE select SDHCI select UNIMP @@ -XXX,XX +XXX,XX @@ config FSL_IMX6UL select IMX select IMX_FEC select IMX_I2C + select WDT_IMX2 select SDHCI select UNIMP diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_IMX) += imx6_ccm.o common-obj-$(CONFIG_IMX) += imx6ul_ccm.o obj-$(CONFIG_IMX) += imx6_src.o common-obj-$(CONFIG_IMX) += imx7_ccm.o -common-obj-$(CONFIG_IMX) += imx2_wdt.o common-obj-$(CONFIG_IMX) += imx7_snvs.o common-obj-$(CONFIG_IMX) += imx7_gpr.o common-obj-$(CONFIG_IMX) += imx_rngc.o diff --git a/hw/watchdog/Kconfig b/hw/watchdog/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/Kconfig +++ b/hw/watchdog/Kconfig @@ -XXX,XX +XXX,XX @@ config WDT_IB700 config WDT_DIAG288 bool + +config WDT_IMX2 + bool diff --git a/hw/watchdog/Makefile.objs b/hw/watchdog/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/Makefile.objs +++ b/hw/watchdog/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_WDT_IB6300ESB) += wdt_i6300esb.o common-obj-$(CONFIG_WDT_IB700) += wdt_ib700.o common-obj-$(CONFIG_WDT_DIAG288) += wdt_diag288.o common-obj-$(CONFIG_ASPEED_SOC) += wdt_aspeed.o +common-obj-$(CONFIG_WDT_IMX2) += wdt_imx2.o -- 2.20.1 From: Guenter Roeck <linux@roeck-us.net> Implement full support for the watchdog in i.MX systems. Pretimeout support is optional because the watchdog hardware on i.MX31 does not support pretimeouts. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200517162135.110364-3-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/watchdog/wdt_imx2.h | 61 ++++++++- hw/watchdog/wdt_imx2.c | 239 +++++++++++++++++++++++++++++++-- 2 files changed, 285 insertions(+), 15 deletions(-) diff --git a/include/hw/watchdog/wdt_imx2.h b/include/hw/watchdog/wdt_imx2.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/watchdog/wdt_imx2.h +++ b/include/hw/watchdog/wdt_imx2.h @@ -XXX,XX +XXX,XX @@ #ifndef IMX2_WDT_H #define IMX2_WDT_H +#include "qemu/bitops.h" #include "hw/sysbus.h" +#include "hw/irq.h" +#include "hw/ptimer.h" #define TYPE_IMX2_WDT "imx2.wdt" #define IMX2_WDT(obj) OBJECT_CHECK(IMX2WdtState, (obj), TYPE_IMX2_WDT) enum IMX2WdtRegisters { - IMX2_WDT_WCR = 0x0000, - IMX2_WDT_REG_NUM = 0x0008 / sizeof(uint16_t) + 1, + IMX2_WDT_WCR = 0x0000, /* Control Register */ + IMX2_WDT_WSR = 0x0002, /* Service Register */ + IMX2_WDT_WRSR = 0x0004, /* Reset Status Register */ + IMX2_WDT_WICR = 0x0006, /* Interrupt Control Register */ + IMX2_WDT_WMCR = 0x0008, /* Misc Register */ }; +#define IMX2_WDT_MMIO_SIZE 0x000a + +/* Control Register definitions */ +#define IMX2_WDT_WCR_WT (0xFF << 8) /* Watchdog Timeout Field */ +#define IMX2_WDT_WCR_WDW BIT(7) /* WDOG Disable for Wait */ +#define IMX2_WDT_WCR_WDA BIT(5) /* WDOG Assertion */ +#define IMX2_WDT_WCR_SRS BIT(4) /* Software Reset Signal */ +#define IMX2_WDT_WCR_WDT BIT(3) /* WDOG Timeout Assertion */ +#define IMX2_WDT_WCR_WDE BIT(2) /* Watchdog Enable */ +#define IMX2_WDT_WCR_WDBG BIT(1) /* Watchdog Debug Enable */ +#define IMX2_WDT_WCR_WDZST BIT(0) /* Watchdog Timer Suspend */ + +#define IMX2_WDT_WCR_LOCK_MASK (IMX2_WDT_WCR_WDZST | IMX2_WDT_WCR_WDBG \ + | IMX2_WDT_WCR_WDW) + +/* Service Register definitions */ +#define IMX2_WDT_SEQ1 0x5555 /* service sequence 1 */ +#define IMX2_WDT_SEQ2 0xAAAA /* service sequence 2 */ + +/* Reset Status Register definitions */ +#define IMX2_WDT_WRSR_TOUT BIT(1) /* Reset due to Timeout */ +#define IMX2_WDT_WRSR_SFTW BIT(0) /* Reset due to software reset */ + +/* Interrupt Control Register definitions */ +#define IMX2_WDT_WICR_WIE BIT(15) /* Interrupt Enable */ +#define IMX2_WDT_WICR_WTIS BIT(14) /* Interrupt Status */ +#define IMX2_WDT_WICR_WICT 0xff /* Interrupt Timeout */ +#define IMX2_WDT_WICR_WICT_DEF 0x04 /* Default interrupt timeout (2s) */ + +#define IMX2_WDT_WICR_LOCK_MASK (IMX2_WDT_WICR_WIE | IMX2_WDT_WICR_WICT) + +/* Misc Control Register definitions */ +#define IMX2_WDT_WMCR_PDE BIT(0) /* Power-Down Enable */ typedef struct IMX2WdtState { /* <private> */ SysBusDevice parent_obj; + /*< public >*/ MemoryRegion mmio; + qemu_irq irq; + + struct ptimer_state *timer; + struct ptimer_state *itimer; + + bool pretimeout_support; + bool wicr_locked; + + uint16_t wcr; + uint16_t wsr; + uint16_t wrsr; + uint16_t wicr; + uint16_t wmcr; + + bool wcr_locked; /* affects WDZST, WDBG, and WDW */ + bool wcr_wde_locked; /* affects WDE */ + bool wcr_wdt_locked; /* affects WDT (never cleared) */ } IMX2WdtState; #endif /* IMX2_WDT_H */ diff --git a/hw/watchdog/wdt_imx2.c b/hw/watchdog/wdt_imx2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/wdt_imx2.c +++ b/hw/watchdog/wdt_imx2.c @@ -XXX,XX +XXX,XX @@ #include "qemu/bitops.h" #include "qemu/module.h" #include "sysemu/watchdog.h" +#include "migration/vmstate.h" +#include "hw/qdev-properties.h" #include "hw/watchdog/wdt_imx2.h" -#define IMX2_WDT_WCR_WDA BIT(5) /* -> External Reset WDOG_B */ -#define IMX2_WDT_WCR_SRS BIT(4) /* -> Software Reset Signal */ - -static uint64_t imx2_wdt_read(void *opaque, hwaddr addr, - unsigned int size) +static void imx2_wdt_interrupt(void *opaque) { + IMX2WdtState *s = IMX2_WDT(opaque); + + s->wicr |= IMX2_WDT_WICR_WTIS; + qemu_set_irq(s->irq, 1); +} + +static void imx2_wdt_expired(void *opaque) +{ + IMX2WdtState *s = IMX2_WDT(opaque); + + s->wrsr = IMX2_WDT_WRSR_TOUT; + + /* Perform watchdog action if watchdog is enabled */ + if (s->wcr & IMX2_WDT_WCR_WDE) { + s->wrsr = IMX2_WDT_WRSR_TOUT; + watchdog_perform_action(); + } +} + +static void imx2_wdt_reset(DeviceState *dev) +{ + IMX2WdtState *s = IMX2_WDT(dev); + + ptimer_transaction_begin(s->timer); + ptimer_stop(s->timer); + ptimer_transaction_commit(s->timer); + + if (s->pretimeout_support) { + ptimer_transaction_begin(s->itimer); + ptimer_stop(s->itimer); + ptimer_transaction_commit(s->itimer); + } + + s->wicr_locked = false; + s->wcr_locked = false; + s->wcr_wde_locked = false; + + s->wcr = IMX2_WDT_WCR_WDA | IMX2_WDT_WCR_SRS; + s->wsr = 0; + s->wrsr &= ~(IMX2_WDT_WRSR_TOUT | IMX2_WDT_WRSR_SFTW); + s->wicr = IMX2_WDT_WICR_WICT_DEF; + s->wmcr = IMX2_WDT_WMCR_PDE; +} + +static uint64_t imx2_wdt_read(void *opaque, hwaddr addr, unsigned int size) +{ + IMX2WdtState *s = IMX2_WDT(opaque); + + switch (addr) { + case IMX2_WDT_WCR: + return s->wcr; + case IMX2_WDT_WSR: + return s->wsr; + case IMX2_WDT_WRSR: + return s->wrsr; + case IMX2_WDT_WICR: + return s->wicr; + case IMX2_WDT_WMCR: + return s->wmcr; + } return 0; } +static void imx_wdt2_update_itimer(IMX2WdtState *s, bool start) +{ + bool running = (s->wcr & IMX2_WDT_WCR_WDE) && (s->wcr & IMX2_WDT_WCR_WT); + bool enabled = s->wicr & IMX2_WDT_WICR_WIE; + + ptimer_transaction_begin(s->itimer); + if (start || !enabled) { + ptimer_stop(s->itimer); + } + if (running && enabled) { + int count = ptimer_get_count(s->timer); + int pretimeout = s->wicr & IMX2_WDT_WICR_WICT; + + /* + * Only (re-)start pretimeout timer if its counter value is larger + * than 0. Otherwise it will fire right away and we'll get an + * interrupt loop. + */ + if (count > pretimeout) { + ptimer_set_count(s->itimer, count - pretimeout); + if (start) { + ptimer_run(s->itimer, 1); + } + } + } + ptimer_transaction_commit(s->itimer); +} + +static void imx_wdt2_update_timer(IMX2WdtState *s, bool start) +{ + ptimer_transaction_begin(s->timer); + if (start) { + ptimer_stop(s->timer); + } + if ((s->wcr & IMX2_WDT_WCR_WDE) && (s->wcr & IMX2_WDT_WCR_WT)) { + int count = (s->wcr & IMX2_WDT_WCR_WT) >> 8; + + /* A value of 0 reflects one period (0.5s). */ + ptimer_set_count(s->timer, count + 1); + if (start) { + ptimer_run(s->timer, 1); + } + } + ptimer_transaction_commit(s->timer); + if (s->pretimeout_support) { + imx_wdt2_update_itimer(s, start); + } +} + static void imx2_wdt_write(void *opaque, hwaddr addr, uint64_t value, unsigned int size) { - if (addr == IMX2_WDT_WCR && - (~value & (IMX2_WDT_WCR_WDA | IMX2_WDT_WCR_SRS))) { - watchdog_perform_action(); + IMX2WdtState *s = IMX2_WDT(opaque); + + switch (addr) { + case IMX2_WDT_WCR: + if (s->wcr_locked) { + value &= ~IMX2_WDT_WCR_LOCK_MASK; + value |= (s->wicr & IMX2_WDT_WCR_LOCK_MASK); + } + s->wcr_locked = true; + if (s->wcr_wde_locked) { + value &= ~IMX2_WDT_WCR_WDE; + value |= (s->wicr & ~IMX2_WDT_WCR_WDE); + } else if (value & IMX2_WDT_WCR_WDE) { + s->wcr_wde_locked = true; + } + if (s->wcr_wdt_locked) { + value &= ~IMX2_WDT_WCR_WDT; + value |= (s->wicr & ~IMX2_WDT_WCR_WDT); + } else if (value & IMX2_WDT_WCR_WDT) { + s->wcr_wdt_locked = true; + } + + s->wcr = value; + if (!(value & IMX2_WDT_WCR_SRS)) { + s->wrsr = IMX2_WDT_WRSR_SFTW; + } + if (!(value & (IMX2_WDT_WCR_WDA | IMX2_WDT_WCR_SRS)) || + (!(value & IMX2_WDT_WCR_WT) && (value & IMX2_WDT_WCR_WDE))) { + watchdog_perform_action(); + } + s->wcr |= IMX2_WDT_WCR_SRS; + imx_wdt2_update_timer(s, true); + break; + case IMX2_WDT_WSR: + if (s->wsr == IMX2_WDT_SEQ1 && value == IMX2_WDT_SEQ2) { + imx_wdt2_update_timer(s, false); + } + s->wsr = value; + break; + case IMX2_WDT_WRSR: + break; + case IMX2_WDT_WICR: + if (!s->pretimeout_support) { + return; + } + value &= IMX2_WDT_WICR_LOCK_MASK | IMX2_WDT_WICR_WTIS; + if (s->wicr_locked) { + value &= IMX2_WDT_WICR_WTIS; + value |= (s->wicr & IMX2_WDT_WICR_LOCK_MASK); + } + s->wicr = value | (s->wicr & IMX2_WDT_WICR_WTIS); + if (value & IMX2_WDT_WICR_WTIS) { + s->wicr &= ~IMX2_WDT_WICR_WTIS; + qemu_set_irq(s->irq, 0); + } + imx_wdt2_update_itimer(s, true); + s->wicr_locked = true; + break; + case IMX2_WDT_WMCR: + s->wmcr = value & IMX2_WDT_WMCR_PDE; + break; } } @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps imx2_wdt_ops = { * real device but in practice there is no reason for a guest * to access this device unaligned. */ - .min_access_size = 4, - .max_access_size = 4, + .min_access_size = 2, + .max_access_size = 2, .unaligned = false, }, }; +static const VMStateDescription vmstate_imx2_wdt = { + .name = "imx2.wdt", + .fields = (VMStateField[]) { + VMSTATE_PTIMER(timer, IMX2WdtState), + VMSTATE_PTIMER(itimer, IMX2WdtState), + VMSTATE_BOOL(wicr_locked, IMX2WdtState), + VMSTATE_BOOL(wcr_locked, IMX2WdtState), + VMSTATE_BOOL(wcr_wde_locked, IMX2WdtState), + VMSTATE_BOOL(wcr_wdt_locked, IMX2WdtState), + VMSTATE_UINT16(wcr, IMX2WdtState), + VMSTATE_UINT16(wsr, IMX2WdtState), + VMSTATE_UINT16(wrsr, IMX2WdtState), + VMSTATE_UINT16(wmcr, IMX2WdtState), + VMSTATE_UINT16(wicr, IMX2WdtState), + VMSTATE_END_OF_LIST() + } +}; + static void imx2_wdt_realize(DeviceState *dev, Error **errp) { IMX2WdtState *s = IMX2_WDT(dev); + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); memory_region_init_io(&s->mmio, OBJECT(dev), &imx2_wdt_ops, s, - TYPE_IMX2_WDT".mmio", - IMX2_WDT_REG_NUM * sizeof(uint16_t)); - sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->mmio); + TYPE_IMX2_WDT, + IMX2_WDT_MMIO_SIZE); + sysbus_init_mmio(sbd, &s->mmio); + sysbus_init_irq(sbd, &s->irq); + + s->timer = ptimer_init(imx2_wdt_expired, s, + PTIMER_POLICY_NO_IMMEDIATE_TRIGGER | + PTIMER_POLICY_NO_IMMEDIATE_RELOAD | + PTIMER_POLICY_NO_COUNTER_ROUND_DOWN); + ptimer_transaction_begin(s->timer); + ptimer_set_freq(s->timer, 2); + ptimer_set_limit(s->timer, 0xff, 1); + ptimer_transaction_commit(s->timer); + if (s->pretimeout_support) { + s->itimer = ptimer_init(imx2_wdt_interrupt, s, + PTIMER_POLICY_NO_IMMEDIATE_TRIGGER | + PTIMER_POLICY_NO_IMMEDIATE_RELOAD | + PTIMER_POLICY_NO_COUNTER_ROUND_DOWN); + ptimer_transaction_begin(s->itimer); + ptimer_set_freq(s->itimer, 2); + ptimer_set_limit(s->itimer, 0xff, 1); + ptimer_transaction_commit(s->itimer); + } } +static Property imx2_wdt_properties[] = { + DEFINE_PROP_BOOL("pretimeout-support", IMX2WdtState, pretimeout_support, + false), +}; + static void imx2_wdt_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + device_class_set_props(dc, imx2_wdt_properties); dc->realize = imx2_wdt_realize; + dc->reset = imx2_wdt_reset; + dc->vmsd = &vmstate_imx2_wdt; + dc->desc = "i.MX watchdog timer"; set_bit(DEVICE_CATEGORY_MISC, dc->categories); } -- 2.20.1 From: Guenter Roeck <linux@roeck-us.net> With this commit, the watchdog on imx25-pdk is fully operational, including pretimeout support. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200517162135.110364-4-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx25.h | 5 +++++ hw/arm/fsl-imx25.c | 10 ++++++++++ hw/arm/Kconfig | 1 + 3 files changed, 16 insertions(+) diff --git a/include/hw/arm/fsl-imx25.h b/include/hw/arm/fsl-imx25.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx25.h +++ b/include/hw/arm/fsl-imx25.h @@ -XXX,XX +XXX,XX @@ #include "hw/gpio/imx_gpio.h" #include "hw/sd/sdhci.h" #include "hw/usb/chipidea.h" +#include "hw/watchdog/wdt_imx2.h" #include "exec/memory.h" #include "target/arm/cpu.h" @@ -XXX,XX +XXX,XX @@ typedef struct FslIMX25State { IMXGPIOState gpio[FSL_IMX25_NUM_GPIOS]; SDHCIState esdhc[FSL_IMX25_NUM_ESDHCS]; ChipideaState usb[FSL_IMX25_NUM_USBS]; + IMX2WdtState wdt; MemoryRegion rom[2]; MemoryRegion iram; MemoryRegion iram_alias; @@ -XXX,XX +XXX,XX @@ typedef struct FslIMX25State { #define FSL_IMX25_GPIO1_SIZE 0x4000 #define FSL_IMX25_GPIO2_ADDR 0x53FD0000 #define FSL_IMX25_GPIO2_SIZE 0x4000 +#define FSL_IMX25_WDT_ADDR 0x53FDC000 +#define FSL_IMX25_WDT_SIZE 0x4000 #define FSL_IMX25_USB1_ADDR 0x53FF4000 #define FSL_IMX25_USB1_SIZE 0x0200 #define FSL_IMX25_USB2_ADDR 0x53FF4400 @@ -XXX,XX +XXX,XX @@ typedef struct FslIMX25State { #define FSL_IMX25_ESDHC2_IRQ 8 #define FSL_IMX25_USB1_IRQ 37 #define FSL_IMX25_USB2_IRQ 35 +#define FSL_IMX25_WDT_IRQ 55 #endif /* FSL_IMX25_H */ diff --git a/hw/arm/fsl-imx25.c b/hw/arm/fsl-imx25.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx25.c +++ b/hw/arm/fsl-imx25.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx25_init(Object *obj) TYPE_CHIPIDEA); } + sysbus_init_child_obj(obj, "wdt", &s->wdt, sizeof(s->wdt), TYPE_IMX2_WDT); } static void fsl_imx25_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void fsl_imx25_realize(DeviceState *dev, Error **errp) usb_table[i].irq)); } + /* Watchdog */ + object_property_set_bool(OBJECT(&s->wdt), true, "pretimeout-support", + &error_abort); + object_property_set_bool(OBJECT(&s->wdt), true, "realized", &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt), 0, FSL_IMX25_WDT_ADDR); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->wdt), 0, + qdev_get_gpio_in(DEVICE(&s->avic), + FSL_IMX25_WDT_IRQ)); + /* initialize 2 x 16 KB ROM */ memory_region_init_rom(&s->rom[0], OBJECT(dev), "imx25.rom0", FSL_IMX25_ROM0_SIZE, &err); diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX25 select IMX select IMX_FEC select IMX_I2C + select WDT_IMX2 select DS1338 config FSL_IMX31 -- 2.20.1 From: Guenter Roeck <linux@roeck-us.net> With this patch, the watchdog on i.MX31 emulations is fully operational. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200517162135.110364-5-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx31.h | 4 ++++ hw/arm/fsl-imx31.c | 6 ++++++ hw/arm/Kconfig | 1 + 3 files changed, 11 insertions(+) diff --git a/include/hw/arm/fsl-imx31.h b/include/hw/arm/fsl-imx31.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx31.h +++ b/include/hw/arm/fsl-imx31.h @@ -XXX,XX +XXX,XX @@ #include "hw/timer/imx_epit.h" #include "hw/i2c/imx_i2c.h" #include "hw/gpio/imx_gpio.h" +#include "hw/watchdog/wdt_imx2.h" #include "exec/memory.h" #include "target/arm/cpu.h" @@ -XXX,XX +XXX,XX @@ typedef struct FslIMX31State { IMXEPITState epit[FSL_IMX31_NUM_EPITS]; IMXI2CState i2c[FSL_IMX31_NUM_I2CS]; IMXGPIOState gpio[FSL_IMX31_NUM_GPIOS]; + IMX2WdtState wdt; MemoryRegion secure_rom; MemoryRegion rom; MemoryRegion iram; @@ -XXX,XX +XXX,XX @@ typedef struct FslIMX31State { #define FSL_IMX31_GPIO1_SIZE 0x4000 #define FSL_IMX31_GPIO2_ADDR 0x53FD0000 #define FSL_IMX31_GPIO2_SIZE 0x4000 +#define FSL_IMX31_WDT_ADDR 0x53FDC000 +#define FSL_IMX31_WDT_SIZE 0x4000 #define FSL_IMX31_AVIC_ADDR 0x68000000 #define FSL_IMX31_AVIC_SIZE 0x100 #define FSL_IMX31_SDRAM0_ADDR 0x80000000 diff --git a/hw/arm/fsl-imx31.c b/hw/arm/fsl-imx31.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx31.c +++ b/hw/arm/fsl-imx31.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx31_init(Object *obj) sysbus_init_child_obj(obj, "gpio[*]", &s->gpio[i], sizeof(s->gpio[i]), TYPE_IMX_GPIO); } + + sysbus_init_child_obj(obj, "wdt", &s->wdt, sizeof(s->wdt), TYPE_IMX2_WDT); } static void fsl_imx31_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void fsl_imx31_realize(DeviceState *dev, Error **errp) gpio_table[i].irq)); } + /* Watchdog */ + object_property_set_bool(OBJECT(&s->wdt), true, "realized", &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt), 0, FSL_IMX31_WDT_ADDR); + /* On a real system, the first 16k is a `secure boot rom' */ memory_region_init_rom(&s->secure_rom, OBJECT(dev), "imx31.secure_rom", FSL_IMX31_SECURE_ROM_SIZE, &err); diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX31 select SERIAL select IMX select IMX_I2C + select WDT_IMX2 select LAN9118 config FSL_IMX6 -- 2.20.1 From: Guenter Roeck <linux@roeck-us.net> With this patch applied, the watchdog in the sabrelite emulation is fully operational, including pretimeout support. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200517162135.110364-6-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/fsl-imx6.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/hw/arm/fsl-imx6.c b/hw/arm/fsl-imx6.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx6.c +++ b/hw/arm/fsl-imx6.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx6_realize(DeviceState *dev, Error **errp) FSL_IMX6_WDOG1_ADDR, FSL_IMX6_WDOG2_ADDR, }; + static const int FSL_IMX6_WDOGn_IRQ[FSL_IMX6_NUM_WDTS] = { + FSL_IMX6_WDOG1_IRQ, + FSL_IMX6_WDOG2_IRQ, + }; + object_property_set_bool(OBJECT(&s->wdt[i]), true, "pretimeout-support", + &error_abort); object_property_set_bool(OBJECT(&s->wdt[i]), true, "realized", &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[i]), 0, FSL_IMX6_WDOGn_ADDR[i]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->wdt[i]), 0, + qdev_get_gpio_in(DEVICE(&s->a9mpcore), + FSL_IMX6_WDOGn_IRQ[i])); } /* ROM memory */ -- 2.20.1 From: Guenter Roeck <linux@roeck-us.net> With this commit, the watchdog on mcimx6ul-evk is fully operational, including pretimeout support. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200517162135.110364-7-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/fsl-imx6ul.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/hw/arm/fsl-imx6ul.c b/hw/arm/fsl-imx6ul.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx6ul.c +++ b/hw/arm/fsl-imx6ul.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) FSL_IMX6UL_WDOG2_ADDR, FSL_IMX6UL_WDOG3_ADDR, }; + static const int FSL_IMX6UL_WDOGn_IRQ[FSL_IMX6UL_NUM_WDTS] = { + FSL_IMX6UL_WDOG1_IRQ, + FSL_IMX6UL_WDOG2_IRQ, + FSL_IMX6UL_WDOG3_IRQ, + }; + object_property_set_bool(OBJECT(&s->wdt[i]), true, "pretimeout-support", + &error_abort); object_property_set_bool(OBJECT(&s->wdt[i]), true, "realized", &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[i]), 0, FSL_IMX6UL_WDOGn_ADDR[i]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->wdt[i]), 0, + qdev_get_gpio_in(DEVICE(&s->a7mpcore), + FSL_IMX6UL_WDOGn_IRQ[i])); } /* -- 2.20.1 From: Guenter Roeck <linux@roeck-us.net> Instantiating PWM, CAN, CAAM, and OCOTP devices is necessary to avoid crashes when booting mainline Linux. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200517162135.110364-8-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx7.h | 16 ++++++++++++++++ hw/arm/fsl-imx7.c | 24 ++++++++++++++++++++++++ 2 files changed, 40 insertions(+) diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx7.h +++ b/include/hw/arm/fsl-imx7.h @@ -XXX,XX +XXX,XX @@ enum FslIMX7MemoryMap { FSL_IMX7_IOMUXC_GPR_ADDR = 0x30340000, FSL_IMX7_IOMUXCn_SIZE = 0x1000, + FSL_IMX7_OCOTP_ADDR = 0x30350000, + FSL_IMX7_OCOTP_SIZE = 0x10000, + FSL_IMX7_ANALOG_ADDR = 0x30360000, FSL_IMX7_SNVS_ADDR = 0x30370000, FSL_IMX7_CCM_ADDR = 0x30380000, @@ -XXX,XX +XXX,XX @@ enum FslIMX7MemoryMap { FSL_IMX7_ADC2_ADDR = 0x30620000, FSL_IMX7_ADCn_SIZE = 0x1000, + FSL_IMX7_PWM1_ADDR = 0x30660000, + FSL_IMX7_PWM2_ADDR = 0x30670000, + FSL_IMX7_PWM3_ADDR = 0x30680000, + FSL_IMX7_PWM4_ADDR = 0x30690000, + FSL_IMX7_PWMn_SIZE = 0x10000, + FSL_IMX7_PCIE_PHY_ADDR = 0x306D0000, FSL_IMX7_PCIE_PHY_SIZE = 0x10000, FSL_IMX7_GPC_ADDR = 0x303A0000, + FSL_IMX7_CAAM_ADDR = 0x30900000, + FSL_IMX7_CAAM_SIZE = 0x40000, + + FSL_IMX7_CAN1_ADDR = 0x30A00000, + FSL_IMX7_CAN2_ADDR = 0x30A10000, + FSL_IMX7_CANn_SIZE = 0x10000, + FSL_IMX7_I2C1_ADDR = 0x30A20000, FSL_IMX7_I2C2_ADDR = 0x30A30000, FSL_IMX7_I2C3_ADDR = 0x30A40000, diff --git a/hw/arm/fsl-imx7.c b/hw/arm/fsl-imx7.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx7.c +++ b/hw/arm/fsl-imx7.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) */ create_unimplemented_device("sdma", FSL_IMX7_SDMA_ADDR, FSL_IMX7_SDMA_SIZE); + /* + * CAAM + */ + create_unimplemented_device("caam", FSL_IMX7_CAAM_ADDR, FSL_IMX7_CAAM_SIZE); + + /* + * PWM + */ + create_unimplemented_device("pwm1", FSL_IMX7_PWM1_ADDR, FSL_IMX7_PWMn_SIZE); + create_unimplemented_device("pwm2", FSL_IMX7_PWM2_ADDR, FSL_IMX7_PWMn_SIZE); + create_unimplemented_device("pwm3", FSL_IMX7_PWM3_ADDR, FSL_IMX7_PWMn_SIZE); + create_unimplemented_device("pwm4", FSL_IMX7_PWM4_ADDR, FSL_IMX7_PWMn_SIZE); + + /* + * CAN + */ + create_unimplemented_device("can1", FSL_IMX7_CAN1_ADDR, FSL_IMX7_CANn_SIZE); + create_unimplemented_device("can2", FSL_IMX7_CAN2_ADDR, FSL_IMX7_CANn_SIZE); + + /* + * OCOTP + */ + create_unimplemented_device("ocotp", FSL_IMX7_OCOTP_ADDR, + FSL_IMX7_OCOTP_SIZE); object_property_set_bool(OBJECT(&s->gpr), true, "realized", &error_abort); -- 2.20.1 From: Guenter Roeck <linux@roeck-us.net> i.MX7 supports watchdog pretimeout interupts. With this commit, the watchdog in mcimx7d-sabre is fully operational, including pretimeout support. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200517162135.110364-9-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx7.h | 5 +++++ hw/arm/fsl-imx7.c | 11 +++++++++++ 2 files changed, 16 insertions(+) diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx7.h +++ b/include/hw/arm/fsl-imx7.h @@ -XXX,XX +XXX,XX @@ enum FslIMX7IRQs { FSL_IMX7_USB2_IRQ = 42, FSL_IMX7_USB3_IRQ = 40, + FSL_IMX7_WDOG1_IRQ = 78, + FSL_IMX7_WDOG2_IRQ = 79, + FSL_IMX7_WDOG3_IRQ = 10, + FSL_IMX7_WDOG4_IRQ = 109, + FSL_IMX7_PCI_INTA_IRQ = 125, FSL_IMX7_PCI_INTB_IRQ = 124, FSL_IMX7_PCI_INTC_IRQ = 123, diff --git a/hw/arm/fsl-imx7.c b/hw/arm/fsl-imx7.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx7.c +++ b/hw/arm/fsl-imx7.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) FSL_IMX7_WDOG3_ADDR, FSL_IMX7_WDOG4_ADDR, }; + static const int FSL_IMX7_WDOGn_IRQ[FSL_IMX7_NUM_WDTS] = { + FSL_IMX7_WDOG1_IRQ, + FSL_IMX7_WDOG2_IRQ, + FSL_IMX7_WDOG3_IRQ, + FSL_IMX7_WDOG4_IRQ, + }; + object_property_set_bool(OBJECT(&s->wdt[i]), true, "pretimeout-support", + &error_abort); object_property_set_bool(OBJECT(&s->wdt[i]), true, "realized", &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[i]), 0, FSL_IMX7_WDOGn_ADDR[i]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->wdt[i]), 0, + qdev_get_gpio_in(DEVICE(&s->a7mpcore), + FSL_IMX7_WDOGn_IRQ[i])); } /* -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> hw_error() calls exit(). This a bit overkill when we can log the accesses as unimplemented or guest error. When fuzzing the devices, we don't want the whole process to exit. Replace some hw_error() calls by qemu_log_mask(). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200518140309.5220-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/integratorcp.c | 23 +++++++++++++++-------- 1 file changed, 15 insertions(+), 8 deletions(-) diff --git a/hw/arm/integratorcp.c b/hw/arm/integratorcp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/integratorcp.c +++ b/hw/arm/integratorcp.c @@ -XXX,XX +XXX,XX @@ #include "exec/address-spaces.h" #include "sysemu/runstate.h" #include "sysemu/sysemu.h" +#include "qemu/log.h" #include "qemu/error-report.h" #include "hw/char/pl011.h" #include "hw/hw.h" @@ -XXX,XX +XXX,XX @@ static uint64_t integratorcm_read(void *opaque, hwaddr offset, /* ??? Voltage control unimplemented. */ return 0; default: - hw_error("integratorcm_read: Unimplemented offset 0x%x\n", - (int)offset); + qemu_log_mask(LOG_UNIMP, + "%s: Unimplemented offset 0x%" HWADDR_PRIX "\n", + __func__, offset); return 0; } } @@ -XXX,XX +XXX,XX @@ static void integratorcm_write(void *opaque, hwaddr offset, /* ??? Voltage control unimplemented. */ break; default: - hw_error("integratorcm_write: Unimplemented offset 0x%x\n", - (int)offset); + qemu_log_mask(LOG_UNIMP, + "%s: Unimplemented offset 0x%" HWADDR_PRIX "\n", + __func__, offset); break; } } @@ -XXX,XX +XXX,XX @@ static uint64_t icp_pic_read(void *opaque, hwaddr offset, case 5: /* INT_SOFTCLR */ case 11: /* FRQ_ENABLECLR */ default: - printf ("icp_pic_read: Bad register offset 0x%x\n", (int)offset); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIX "\n", + __func__, offset); return 0; } } @@ -XXX,XX +XXX,XX @@ static void icp_pic_write(void *opaque, hwaddr offset, case 8: /* FRQ_STATUS */ case 9: /* FRQ_RAWSTAT */ default: - printf ("icp_pic_write: Bad register offset 0x%x\n", (int)offset); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIX "\n", + __func__, offset); return; } icp_pic_update(s); @@ -XXX,XX +XXX,XX @@ static uint64_t icp_control_read(void *opaque, hwaddr offset, case 3: /* CP_DECODE */ return 0x11; default: - hw_error("icp_control_read: Bad offset %x\n", (int)offset); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIX "\n", + __func__, offset); return 0; } } @@ -XXX,XX +XXX,XX @@ static void icp_control_write(void *opaque, hwaddr offset, /* Nothing interesting implemented yet. */ break; default: - hw_error("icp_control_write: Bad offset %x\n", (int)offset); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIX "\n", + __func__, offset); } } -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> hw_error() calls exit(). This a bit overkill when we can log the accesses as unimplemented or guest error. When fuzzing the devices, we don't want the whole process to exit. Replace some hw_error() calls by qemu_log_mask(). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200518140309.5220-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/pxa2xx_gpio.c | 7 ++++--- hw/display/pxa2xx_lcd.c | 8 +++++--- hw/dma/pxa2xx_dma.c | 14 +++++++++----- 3 files changed, 18 insertions(+), 11 deletions(-) diff --git a/hw/arm/pxa2xx_gpio.c b/hw/arm/pxa2xx_gpio.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/pxa2xx_gpio.c +++ b/hw/arm/pxa2xx_gpio.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "cpu.h" -#include "hw/hw.h" #include "hw/irq.h" #include "hw/qdev-properties.h" #include "hw/sysbus.h" @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_gpio_read(void *opaque, hwaddr offset, return s->status[bank]; default: - hw_error("%s: Bad offset " REG_FMT "\n", __func__, offset); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIX "\n", + __func__, offset); } return 0; @@ -XXX,XX +XXX,XX @@ static void pxa2xx_gpio_write(void *opaque, hwaddr offset, break; default: - hw_error("%s: Bad offset " REG_FMT "\n", __func__, offset); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIX "\n", + __func__, offset); } } diff --git a/hw/display/pxa2xx_lcd.c b/hw/display/pxa2xx_lcd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/pxa2xx_lcd.c +++ b/hw/display/pxa2xx_lcd.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" -#include "hw/hw.h" +#include "qemu/log.h" #include "hw/irq.h" #include "migration/vmstate.h" #include "ui/console.h" @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_lcdc_read(void *opaque, hwaddr offset, default: fail: - hw_error("%s: Bad offset " REG_FMT "\n", __func__, offset); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIX "\n", + __func__, offset); } return 0; @@ -XXX,XX +XXX,XX @@ static void pxa2xx_lcdc_write(void *opaque, hwaddr offset, default: fail: - hw_error("%s: Bad offset " REG_FMT "\n", __func__, offset); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIX "\n", + __func__, offset); } } diff --git a/hw/dma/pxa2xx_dma.c b/hw/dma/pxa2xx_dma.c index XXXXXXX..XXXXXXX 100644 --- a/hw/dma/pxa2xx_dma.c +++ b/hw/dma/pxa2xx_dma.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/log.h" #include "hw/hw.h" #include "hw/irq.h" #include "hw/qdev-properties.h" @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_dma_read(void *opaque, hwaddr offset, unsigned int channel; if (size != 4) { - hw_error("%s: Bad access width\n", __func__); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad access width %u\n", + __func__, size); return 5; } @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_dma_read(void *opaque, hwaddr offset, return s->chan[channel].cmd; } } - - hw_error("%s: Bad offset 0x" TARGET_FMT_plx "\n", __func__, offset); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIX "\n", + __func__, offset); return 7; } @@ -XXX,XX +XXX,XX @@ static void pxa2xx_dma_write(void *opaque, hwaddr offset, unsigned int channel; if (size != 4) { - hw_error("%s: Bad access width\n", __func__); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad access width %u\n", + __func__, size); return; } @@ -XXX,XX +XXX,XX @@ static void pxa2xx_dma_write(void *opaque, hwaddr offset, break; } fail: - hw_error("%s: Bad offset " TARGET_FMT_plx "\n", __func__, offset); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIX "\n", + __func__, offset); } } -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> hw_error() calls exit(). This a bit overkill when we can log the accesses as unimplemented or guest error. When fuzzing the devices, we don't want the whole process to exit. Replace some hw_error() calls by qemu_log_mask(). Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200518140309.5220-4-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/char/xilinx_uartlite.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/hw/char/xilinx_uartlite.c b/hw/char/xilinx_uartlite.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/xilinx_uartlite.c +++ b/hw/char/xilinx_uartlite.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" -#include "hw/hw.h" +#include "qemu/log.h" #include "hw/irq.h" #include "hw/qdev-properties.h" #include "hw/sysbus.h" @@ -XXX,XX +XXX,XX @@ uart_write(void *opaque, hwaddr addr, switch (addr) { case R_STATUS: - hw_error("write to UART STATUS?\n"); + qemu_log_mask(LOG_GUEST_ERROR, "%s: write to UART STATUS\n", + __func__); break; case R_CTRL: -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> hw_error() calls exit(). This a bit overkill when we can log the accesses as unimplemented or guest error. When fuzzing the devices, we don't want the whole process to exit. Replace some hw_error() calls by qemu_log_mask(). Per the datasheet "Exynos 4412 RISC Microprocessor Rev 1.00" Chapter 25 "Multi Core Timer (MCT)" figure 1 and table 4, the default value on the APB bus is 0. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200518140309.5220-5-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/exynos4210_mct.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/hw/timer/exynos4210_mct.c b/hw/timer/exynos4210_mct.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/exynos4210_mct.c +++ b/hw/timer/exynos4210_mct.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qemu/log.h" -#include "hw/hw.h" #include "hw/sysbus.h" #include "migration/vmstate.h" #include "qemu/timer.h" @@ -XXX,XX +XXX,XX @@ #include "hw/ptimer.h" #include "hw/arm/exynos4210.h" -#include "hw/hw.h" #include "hw/irq.h" //#define DEBUG_MCT @@ -XXX,XX +XXX,XX @@ static uint64_t exynos4210_mct_read(void *opaque, hwaddr offset, int index; int shift; uint64_t count; - uint32_t value; + uint32_t value = 0; int lt_i; switch (offset) { @@ -XXX,XX +XXX,XX @@ static uint64_t exynos4210_mct_read(void *opaque, hwaddr offset, break; default: - hw_error("exynos4210.mct: bad read offset " - TARGET_FMT_plx "\n", offset); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIX "\n", + __func__, offset); break; } return value; @@ -XXX,XX +XXX,XX @@ static void exynos4210_mct_write(void *opaque, hwaddr offset, break; default: - hw_error("exynos4210.mct: bad write offset " - TARGET_FMT_plx "\n", offset); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIX "\n", + __func__, offset); break; } } -- 2.20.1 From: Geert Uytterhoeven <geert+renesas@glider.be> Add a definition for the number of GPIO lines controlled by a PL061 instance, and use it instead of the hardcoded magic value 8. Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200519085143.1376-1-geert+renesas@glider.be Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/gpio/pl061.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/hw/gpio/pl061.c b/hw/gpio/pl061.c index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/pl061.c +++ b/hw/gpio/pl061.c @@ -XXX,XX +XXX,XX @@ static const uint8_t pl061_id_luminary[12] = #define TYPE_PL061 "pl061" #define PL061(obj) OBJECT_CHECK(PL061State, (obj), TYPE_PL061) +#define N_GPIOS 8 + typedef struct PL061State { SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ typedef struct PL061State { uint32_t cr; uint32_t amsel; qemu_irq irq; - qemu_irq out[8]; + qemu_irq out[N_GPIOS]; const unsigned char *id; uint32_t rsvd_start; /* reserved area: [rsvd_start, 0xfcc] */ } PL061State; @@ -XXX,XX +XXX,XX @@ static void pl061_update(PL061State *s) changed = s->old_out_data ^ out; if (changed) { s->old_out_data = out; - for (i = 0; i < 8; i++) { + for (i = 0; i < N_GPIOS; i++) { mask = 1 << i; if (changed & mask) { DPRINTF("Set output %d = %d\n", i, (out & mask) != 0); @@ -XXX,XX +XXX,XX @@ static void pl061_update(PL061State *s) changed = (s->old_in_data ^ s->data) & ~s->dir; if (changed) { s->old_in_data = s->data; - for (i = 0; i < 8; i++) { + for (i = 0; i < N_GPIOS; i++) { mask = 1 << i; if (changed & mask) { DPRINTF("Changed input %d = %d\n", i, (s->data & mask) != 0); @@ -XXX,XX +XXX,XX @@ static void pl061_init(Object *obj) memory_region_init_io(&s->iomem, obj, &pl061_ops, s, "pl061", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->irq); - qdev_init_gpio_in(dev, pl061_set_irq, 8); - qdev_init_gpio_out(dev, s->out, 8); + qdev_init_gpio_in(dev, pl061_set_irq, N_GPIOS); + qdev_init_gpio_out(dev, s->out, N_GPIOS); } static void pl061_class_init(ObjectClass *klass, void *data) -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> The 8-byte store for the end a !is_q operation can be merged with the other stores. Use a no-op vector move to trigger the expand_clr portion of tcg_gen_gvec_mov. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200519212453.28494-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void clear_vec_high(DisasContext *s, bool is_q, int rd) unsigned ofs = fp_reg_offset(s, rd, MO_64); unsigned vsz = vec_full_reg_size(s); - if (!is_q) { - TCGv_i64 tcg_zero = tcg_const_i64(0); - tcg_gen_st_i64(tcg_zero, cpu_env, ofs + 8); - tcg_temp_free_i64(tcg_zero); - } - if (vsz > 16) { - tcg_gen_gvec_dup_imm(MO_64, ofs + 16, vsz - 16, vsz - 16, 0); - } + /* Nop move, with side effect of clearing the tail. */ + tcg_gen_gvec_mov(MO_64, ofs, ofs, is_q ? 16 : 8, vsz); } void write_fp_dreg(DisasContext *s, int reg, TCGv_i64 v) -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Do not explicitly store zero to the NEON high part when we can pass !is_q to clear_vec_high. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200519212453.28494-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 53 +++++++++++++++++++++++--------------- 1 file changed, 32 insertions(+), 21 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void do_fp_ld(DisasContext *s, int destidx, TCGv_i64 tcg_addr, int size) { /* This always zero-extends and writes to a full 128 bit wide vector */ TCGv_i64 tmplo = tcg_temp_new_i64(); - TCGv_i64 tmphi; + TCGv_i64 tmphi = NULL; if (size < 4) { MemOp memop = s->be_data + size; - tmphi = tcg_const_i64(0); tcg_gen_qemu_ld_i64(tmplo, tcg_addr, get_mem_index(s), memop); } else { bool be = s->be_data == MO_BE; @@ -XXX,XX +XXX,XX @@ static void do_fp_ld(DisasContext *s, int destidx, TCGv_i64 tcg_addr, int size) } tcg_gen_st_i64(tmplo, cpu_env, fp_reg_offset(s, destidx, MO_64)); - tcg_gen_st_i64(tmphi, cpu_env, fp_reg_hi_offset(s, destidx)); - tcg_temp_free_i64(tmplo); - tcg_temp_free_i64(tmphi); - clear_vec_high(s, true, destidx); + if (tmphi) { + tcg_gen_st_i64(tmphi, cpu_env, fp_reg_hi_offset(s, destidx)); + tcg_temp_free_i64(tmphi); + } + clear_vec_high(s, tmphi != NULL, destidx); } /* @@ -XXX,XX +XXX,XX @@ static void disas_simd_ext(DisasContext *s, uint32_t insn) read_vec_element(s, tcg_resh, rm, 0, MO_64); do_ext64(s, tcg_resh, tcg_resl, pos); } - tcg_gen_movi_i64(tcg_resh, 0); } else { TCGv_i64 tcg_hh; typedef struct { @@ -XXX,XX +XXX,XX @@ static void disas_simd_ext(DisasContext *s, uint32_t insn) write_vec_element(s, tcg_resl, rd, 0, MO_64); tcg_temp_free_i64(tcg_resl); - write_vec_element(s, tcg_resh, rd, 1, MO_64); + if (is_q) { + write_vec_element(s, tcg_resh, rd, 1, MO_64); + } tcg_temp_free_i64(tcg_resh); - clear_vec_high(s, true, rd); + clear_vec_high(s, is_q, rd); } /* TBL/TBX @@ -XXX,XX +XXX,XX @@ static void disas_simd_tb(DisasContext *s, uint32_t insn) * the input. */ tcg_resl = tcg_temp_new_i64(); - tcg_resh = tcg_temp_new_i64(); + tcg_resh = NULL; if (is_tblx) { read_vec_element(s, tcg_resl, rd, 0, MO_64); } else { tcg_gen_movi_i64(tcg_resl, 0); } - if (is_tblx && is_q) { - read_vec_element(s, tcg_resh, rd, 1, MO_64); - } else { - tcg_gen_movi_i64(tcg_resh, 0); + + if (is_q) { + tcg_resh = tcg_temp_new_i64(); + if (is_tblx) { + read_vec_element(s, tcg_resh, rd, 1, MO_64); + } else { + tcg_gen_movi_i64(tcg_resh, 0); + } } tcg_idx = tcg_temp_new_i64(); @@ -XXX,XX +XXX,XX @@ static void disas_simd_tb(DisasContext *s, uint32_t insn) write_vec_element(s, tcg_resl, rd, 0, MO_64); tcg_temp_free_i64(tcg_resl); - write_vec_element(s, tcg_resh, rd, 1, MO_64); - tcg_temp_free_i64(tcg_resh); - clear_vec_high(s, true, rd); + + if (is_q) { + write_vec_element(s, tcg_resh, rd, 1, MO_64); + tcg_temp_free_i64(tcg_resh); + } + clear_vec_high(s, is_q, rd); } /* ZIP/UZP/TRN @@ -XXX,XX +XXX,XX @@ static void disas_simd_zip_trn(DisasContext *s, uint32_t insn) } tcg_resl = tcg_const_i64(0); - tcg_resh = tcg_const_i64(0); + tcg_resh = is_q ? tcg_const_i64(0) : NULL; tcg_res = tcg_temp_new_i64(); for (i = 0; i < elements; i++) { @@ -XXX,XX +XXX,XX @@ static void disas_simd_zip_trn(DisasContext *s, uint32_t insn) write_vec_element(s, tcg_resl, rd, 0, MO_64); tcg_temp_free_i64(tcg_resl); - write_vec_element(s, tcg_resh, rd, 1, MO_64); - tcg_temp_free_i64(tcg_resh); - clear_vec_high(s, true, rd); + + if (is_q) { + write_vec_element(s, tcg_resh, rd, 1, MO_64); + tcg_temp_free_i64(tcg_resh); + } + clear_vec_high(s, is_q, rd); } /* -- 2.20.1 Using the MSR instruction to write to CPSR.E is deprecated, but it is required to work from any mode including unprivileged code. We were incorrectly forbidding usermode code from writing it because CPSR_USER did not include the CPSR_E bit. We use CPSR_USER in only three places: * as the mask of what to allow userspace MSR to write to CPSR * when deciding what bits a linux-user signal-return should be able to write from the sigcontext structure * in target_user_copy_regs() when we set up the initial registers for the linux-user process In the first two cases not being able to update CPSR.E is a bug, and in the third case it doesn't matter because CPSR.E is always 0 there. So we can fix both bugs by adding CPSR_E to CPSR_USER. Because the cpsr_write() in restore_sigcontext() is now changing a CPSR bit which is cached in hflags, we need to add an arm_rebuild_hflags() call there; the callsite in target_user_copy_regs() was already rebuilding hflags for other reasons. (The recommended way to change CPSR.E is to use the 'SETEND' instruction, which we do correctly allow from usermode code.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200518142801.20503-1-peter.maydell@linaro.org --- target/arm/cpu.h | 2 +- linux-user/arm/signal.c | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void pmu_init(ARMCPU *cpu); #define CACHED_CPSR_BITS (CPSR_T | CPSR_AIF | CPSR_GE | CPSR_IT | CPSR_Q \ | CPSR_NZCV) /* Bits writable in user mode. */ -#define CPSR_USER (CPSR_NZCV | CPSR_Q | CPSR_GE) +#define CPSR_USER (CPSR_NZCV | CPSR_Q | CPSR_GE | CPSR_E) /* Execution state bits. MRS read as zero, MSR writes ignored. */ #define CPSR_EXEC (CPSR_T | CPSR_IT | CPSR_J | CPSR_IL) diff --git a/linux-user/arm/signal.c b/linux-user/arm/signal.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/arm/signal.c +++ b/linux-user/arm/signal.c @@ -XXX,XX +XXX,XX @@ restore_sigcontext(CPUARMState *env, struct target_sigcontext *sc) #ifdef TARGET_CONFIG_CPU_32 __get_user(cpsr, &sc->arm_cpsr); cpsr_write(env, cpsr, CPSR_USER | CPSR_EXEC, CPSRWriteByInstr); + arm_rebuild_hflags(env); #endif err |= !valid_user_regs(env); -- 2.20.1 From: Amanieu d'Antras <amanieu@gmail.com> This fixes signal handlers running with the wrong endianness if the interrupted code used SETEND to dynamically switch endianness. Signed-off-by: Amanieu d'Antras <amanieu@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200511131117.2486486-1-amanieu@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/arm/signal.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/linux-user/arm/signal.c b/linux-user/arm/signal.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/arm/signal.c +++ b/linux-user/arm/signal.c @@ -XXX,XX +XXX,XX @@ setup_return(CPUARMState *env, struct target_sigaction *ka, } else { cpsr &= ~CPSR_T; } + if (env->cp15.sctlr_el[1] & SCTLR_E0E) { + cpsr |= CPSR_E; + } else { + cpsr &= ~CPSR_E; + } if (ka->sa_flags & TARGET_SA_RESTORER) { if (is_fdpic) { @@ -XXX,XX +XXX,XX @@ setup_return(CPUARMState *env, struct target_sigaction *ka, env->regs[13] = frame_addr; env->regs[14] = retcode; env->regs[15] = handler & (thumb ? ~1 : ~3); - cpsr_write(env, cpsr, CPSR_IT | CPSR_T, CPSRWriteByInstr); + cpsr_write(env, cpsr, CPSR_IT | CPSR_T | CPSR_E, CPSRWriteByInstr); + arm_rebuild_hflags(env); return 0; } -- 2.20.1 The Arm signal-handling code has some parts ifdeffed with a TARGET_CONFIG_CPU_32, which is always defined. This is a leftover from when this code's structure was based on the Linux kernel signal handling code, where it was intended to support 26-bit Arm CPUs. The kernel dropped its CONFIG_CPU_32 in kernel commit 4da8b8208eded0ba21e3 in 2009. QEMU has never had 26-bit CPU support and is unlikely to ever add it; we certainly aren't going to support 26-bit Linux binaries via linux-user mode. The ifdef is just unhelpful noise, so remove it entirely. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200518143014.20689-1-peter.maydell@linaro.org --- linux-user/arm/signal.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/linux-user/arm/signal.c b/linux-user/arm/signal.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/arm/signal.c +++ b/linux-user/arm/signal.c @@ -XXX,XX +XXX,XX @@ struct rt_sigframe_v2 abi_ulong retcode[4]; }; -#define TARGET_CONFIG_CPU_32 1 - /* * For ARM syscalls, we encode the syscall number into the instruction. */ @@ -XXX,XX +XXX,XX @@ setup_sigcontext(struct target_sigcontext *sc, /*struct _fpstate *fpstate,*/ __put_user(env->regs[13], &sc->arm_sp); __put_user(env->regs[14], &sc->arm_lr); __put_user(env->regs[15], &sc->arm_pc); -#ifdef TARGET_CONFIG_CPU_32 __put_user(cpsr_read(env), &sc->arm_cpsr); -#endif __put_user(/* current->thread.trap_no */ 0, &sc->trap_no); __put_user(/* current->thread.error_code */ 0, &sc->error_code); @@ -XXX,XX +XXX,XX @@ restore_sigcontext(CPUARMState *env, struct target_sigcontext *sc) __get_user(env->regs[13], &sc->arm_sp); __get_user(env->regs[14], &sc->arm_lr); __get_user(env->regs[15], &sc->arm_pc); -#ifdef TARGET_CONFIG_CPU_32 __get_user(cpsr, &sc->arm_cpsr); cpsr_write(env, cpsr, CPSR_USER | CPSR_EXEC, CPSRWriteByInstr); arm_rebuild_hflags(env); -#endif err |= !valid_user_regs(env); -- 2.20.1 v3->v4: Windows headers define an INT type which clashed with an enum value name in arm_gicv3_its.c... The following changes since commit eae587e8e3694b1aceab23239493fb4c7e1a80f5: Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2021-09-13' into staging (2021-09-13 11:00:30 +0100) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20210913-3 for you to fetch changes up to 28e987a7e7edaa3ca7feeac65edca26145df8814: hw/arm/mps2.c: Mark internal-only I2C buses as 'full' (2021-09-13 21:01:08 +0100) ---------------------------------------------------------------- target-arm queue: * mark MPS2/MPS3 board-internal i2c buses as 'full' so that command line user-created devices are not plugged into them * Take an exception if PSTATE.IL is set * Support an emulated ITS in the virt board * Add support for kudo-bmc board * Probe for KVM_CAP_ARM_VM_IPA_SIZE when creating scratch VM * cadence_uart: Fix clock handling issues that prevented u-boot from running ---------------------------------------------------------------- Bin Meng (6): hw/misc: zynq_slcr: Correctly compute output clocks in the reset exit phase hw/char: cadence_uart: Disable transmit when input clock is disabled hw/char: cadence_uart: Move clock/reset check to uart_can_receive() hw/char: cadence_uart: Convert to memop_with_attrs() ops hw/char: cadence_uart: Ignore access when unclocked or in reset for uart_{read, write}() hw/char: cadence_uart: Log a guest error when device is unclocked or in reset Chris Rauer (1): hw/arm: Add support for kudo-bmc board. Marc Zyngier (1): hw/arm/virt: KVM: Probe for KVM_CAP_ARM_VM_IPA_SIZE when creating scratch VM Peter Maydell (5): target/arm: Take an exception if PSTATE.IL is set qdev: Support marking individual buses as 'full' hw/arm/mps2-tz.c: Add extra data parameter to MakeDevFn hw/arm/mps2-tz.c: Mark internal-only I2C buses as 'full' hw/arm/mps2.c: Mark internal-only I2C buses as 'full' Richard Henderson (1): target/arm: Merge disas_a64_insn into aarch64_tr_translate_insn Shashi Mallela (9): hw/intc: GICv3 ITS initial framework hw/intc: GICv3 ITS register definitions added hw/intc: GICv3 ITS command queue framework hw/intc: GICv3 ITS Command processing hw/intc: GICv3 ITS Feature enablement hw/intc: GICv3 redistributor ITS processing tests/data/acpi/virt: Add IORT files for ITS hw/arm/virt: add ITS support in virt GIC tests/data/acpi/virt: Update IORT files for ITS docs/system/arm/nuvoton.rst | 1 + hw/intc/gicv3_internal.h | 188 ++++- include/hw/arm/virt.h | 2 + include/hw/intc/arm_gicv3_common.h | 13 + include/hw/intc/arm_gicv3_its_common.h | 32 +- include/hw/qdev-core.h | 24 + target/arm/cpu.h | 1 + target/arm/kvm_arm.h | 4 +- target/arm/syndrome.h | 5 + target/arm/translate.h | 2 + hw/arm/mps2-tz.c | 92 ++- hw/arm/mps2.c | 12 +- hw/arm/npcm7xx_boards.c | 34 + hw/arm/virt.c | 29 +- hw/char/cadence_uart.c | 61 +- hw/intc/arm_gicv3.c | 14 + hw/intc/arm_gicv3_common.c | 13 + hw/intc/arm_gicv3_cpuif.c | 7 +- hw/intc/arm_gicv3_dist.c | 5 +- hw/intc/arm_gicv3_its.c | 1322 ++++++++++++++++++++++++++++++++ hw/intc/arm_gicv3_its_common.c | 7 +- hw/intc/arm_gicv3_its_kvm.c | 2 +- hw/intc/arm_gicv3_redist.c | 153 +++- hw/misc/zynq_slcr.c | 31 +- softmmu/qdev-monitor.c | 7 +- target/arm/helper-a64.c | 1 + target/arm/helper.c | 8 + target/arm/kvm.c | 7 +- target/arm/translate-a64.c | 255 +++--- target/arm/translate.c | 21 + hw/intc/meson.build | 1 + tests/data/acpi/virt/IORT | Bin 0 -> 124 bytes tests/data/acpi/virt/IORT.memhp | Bin 0 -> 124 bytes tests/data/acpi/virt/IORT.numamem | Bin 0 -> 124 bytes tests/data/acpi/virt/IORT.pxb | Bin 0 -> 124 bytes 35 files changed, 2144 insertions(+), 210 deletions(-) create mode 100644 hw/intc/arm_gicv3_its.c create mode 100644 tests/data/acpi/virt/IORT create mode 100644 tests/data/acpi/virt/IORT.memhp create mode 100644 tests/data/acpi/virt/IORT.numamem create mode 100644 tests/data/acpi/virt/IORT.pxb