The following series of patches adds vTPM emulator support for the
ppc64 platform (pSeries).
It can be tested as follows with swtpm/libtpms:
mkdir /tmp/mytpm1
swtpm socket --tpmstate dir=/tmp/mytpm1 \
--ctrl type=unixio,path=/tmp/mytpm1/swtpm-sock \
--log level=20
If TPM 2 is desired, add --tpm2 as parameter to the above.
In another terminal start QEMU:
sudo ./ppc64-softmmu/qemu-system-ppc64 -display sdl \
-machine pseries,accel=kvm \
-m 1024 -bios slof.bin -boot menu=on \
-nodefaults -device VGA -device pci-ohci -device usb-kbd \
-chardev socket,id=chrtpm,path=/tmp/mytpm1/swtpm-sock \
-tpmdev emulator,id=tpm0,chardev=chrtpm \
-device tpm-spapr,tpmdev=tpm0 \
-device spapr-vscsi,id=scsi0,reg=0x00002000 \
-device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x3,drive=drive-virtio-disk0,id=virtio-disk0 \
-drive file=test.img,format=raw,if=none,id=drive-virtio-disk0
Links:
- libtpms: https://github.com/stefanberger/libtpms/wiki
- swtpm: https://github.com/stefanberger/swtpm/wiki
Changes:
v5->v6:
- adjusted names of structures and simplified
- only transmitting min. necessary bytes to pass to VM after resume
- addressed other issues pointed out by D. Gibson
v4->v5:
- use runstate_check(RUN_STATE_FINISH_MIGRATE) to check whether devices
are suspending; ditch 3 patches in this series that tried to do similar
v3->v4:
- addressed comments to v3
- reworked suspend/resume support that requires extensions to backends
v2->v3:
- patch 1: a TPM 2 is identified by IBM,vtpm20 in the compatible node
- patch 1: convert to tracing to display Tx and Rx buffers
- added documentation patch
- added patch to enable TPM device as part of pSeries
v1->v2:
- followed Cedric Le Goater's suggestions to patch 1
- send appropriate CRQ error responses if DMA read or write fails
- renamed tpm_spapr_got_payload to tpm_spapr_process_cmd and
pass endianess-adjusted data pointer from CRQ to it
Regards,
Stefan
Stefan Berger (4):
tpm_spapr: Support TPM for ppc64 using CRQ based interface
tpm_spapr: Support suspend and resume
hw/ppc/Kconfig: Enable TPM_SPAPR as part of PSERIES config
docs: tpm: Add example command line for ppc64 and tpm-spapr
docs/specs/tpm.txt | 20 +-
hw/ppc/Kconfig | 1 +
hw/tpm/Kconfig | 6 +
hw/tpm/Makefile.objs | 1 +
hw/tpm/tpm_spapr.c | 470 +++++++++++++++++++++++++++++++++++++++++++
hw/tpm/trace-events | 14 ++
include/sysemu/tpm.h | 3 +
qapi/tpm.json | 6 +-
8 files changed, 517 insertions(+), 4 deletions(-)
create mode 100644 hw/tpm/tpm_spapr.c
--
2.21.0