[PATCH v2] fdc/i8257: implement verify transfer mode

Sven Schnelle posted 1 patch 4 years, 4 months ago
Test asan passed
Test checkpatch passed
Test FreeBSD passed
Test docker-mingw@fedora passed
Test docker-clang@ubuntu passed
Test docker-quick@centos7 passed
Patches applied successfully (tree, apply log)
git fetch https://github.com/patchew-project/qemu tags/patchew/20191030082827.10010-1-svens@stackframe.org
There is a newer version of this series
hw/block/fdc.c       | 39 +++++++++++++++------------------------
hw/dma/i8257.c       | 20 +++++++++++++-------
include/hw/isa/isa.h |  1 -
3 files changed, 28 insertions(+), 32 deletions(-)
[PATCH v2] fdc/i8257: implement verify transfer mode
Posted by Sven Schnelle 4 years, 4 months ago
While working on the Tulip driver i tried to write some Teledisk images to
a floppy image which didn't work. Turned out that Teledisk checks the written
data by issuing a READ command to the FDC but running the DMA controller
in VERIFY mode. As we ignored the DMA request in that case, the DMA transfer
never finished, and Teledisk reported an error.

The i8257 spec says about verify transfers:

3) DMA verify, which does not actually involve the transfer of data. When an
8257 channel is in the DMA verify mode, it will respond the same as described
for transfer operations, except that no memory or I/O read/write control signals
will be generated.

Hervé proposed to remove all the dma_mode_ok stuff from fdc to have a more
clear boundary between DMA and FDC, so this patch also does that.

Suggested-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Sven Schnelle <svens@stackframe.org>
---
 hw/block/fdc.c       | 39 +++++++++++++++------------------------
 hw/dma/i8257.c       | 20 +++++++++++++-------
 include/hw/isa/isa.h |  1 -
 3 files changed, 28 insertions(+), 32 deletions(-)

diff --git a/hw/block/fdc.c b/hw/block/fdc.c
index ac5d31e8c1..18fd22bfb7 100644
--- a/hw/block/fdc.c
+++ b/hw/block/fdc.c
@@ -1716,9 +1716,8 @@ static void fdctrl_start_transfer(FDCtrl *fdctrl, int direction)
     if (fdctrl->dor & FD_DOR_DMAEN) {
         IsaDmaTransferMode dma_mode;
         IsaDmaClass *k = ISADMA_GET_CLASS(fdctrl->dma);
-        bool dma_mode_ok;
+
         /* DMA transfer are enabled. Check if DMA channel is well programmed */
-        dma_mode = k->get_transfer_mode(fdctrl->dma, fdctrl->dma_chann);
         FLOPPY_DPRINTF("dma_mode=%d direction=%d (%d - %d)\n",
                        dma_mode, direction,
                        (128 << fdctrl->fifo[5]) *
@@ -1727,40 +1726,32 @@ static void fdctrl_start_transfer(FDCtrl *fdctrl, int direction)
         case FD_DIR_SCANE:
         case FD_DIR_SCANL:
         case FD_DIR_SCANH:
-            dma_mode_ok = (dma_mode == ISADMA_TRANSFER_VERIFY);
             break;
         case FD_DIR_WRITE:
-            dma_mode_ok = (dma_mode == ISADMA_TRANSFER_WRITE);
             break;
         case FD_DIR_READ:
-            dma_mode_ok = (dma_mode == ISADMA_TRANSFER_READ);
             break;
         case FD_DIR_VERIFY:
-            dma_mode_ok = true;
             break;
         default:
-            dma_mode_ok = false;
             break;
         }
-        if (dma_mode_ok) {
-            /* No access is allowed until DMA transfer has completed */
-            fdctrl->msr &= ~FD_MSR_RQM;
-            if (direction != FD_DIR_VERIFY) {
-                /* Now, we just have to wait for the DMA controller to
-                 * recall us...
-                 */
-                k->hold_DREQ(fdctrl->dma, fdctrl->dma_chann);
-                k->schedule(fdctrl->dma);
-            } else {
-                /* Start transfer */
-                fdctrl_transfer_handler(fdctrl, fdctrl->dma_chann, 0,
-                                        fdctrl->data_len);
-            }
-            return;
+
+        /* No access is allowed until DMA transfer has completed */
+        fdctrl->msr &= ~FD_MSR_RQM;
+        if (direction != FD_DIR_VERIFY) {
+            /*
+             * Now, we just have to wait for the DMA controller to
+             * recall us...
+             */
+            k->hold_DREQ(fdctrl->dma, fdctrl->dma_chann);
+            k->schedule(fdctrl->dma);
         } else {
-            FLOPPY_DPRINTF("bad dma_mode=%d direction=%d\n", dma_mode,
-                           direction);
+            /* Start transfer */
+            fdctrl_transfer_handler(fdctrl, fdctrl->dma_chann, 0,
+                    fdctrl->data_len);
         }
+        return;
     }
     FLOPPY_DPRINTF("start non-DMA transfer\n");
     fdctrl->msr |= FD_MSR_NONDMA | FD_MSR_RQM;
diff --git a/hw/dma/i8257.c b/hw/dma/i8257.c
index 792f617eb4..85dad3d391 100644
--- a/hw/dma/i8257.c
+++ b/hw/dma/i8257.c
@@ -292,12 +292,6 @@ static uint64_t i8257_read_cont(void *opaque, hwaddr nport, unsigned size)
     return val;
 }
 
-static IsaDmaTransferMode i8257_dma_get_transfer_mode(IsaDma *obj, int nchan)
-{
-    I8257State *d = I8257(obj);
-    return (d->regs[nchan & 3].mode >> 2) & 3;
-}
-
 static bool i8257_dma_has_autoinitialization(IsaDma *obj, int nchan)
 {
     I8257State *d = I8257(obj);
@@ -400,6 +394,11 @@ static void i8257_dma_register_channel(IsaDma *obj, int nchan,
     r->opaque = opaque;
 }
 
+static bool i8257_is_verify_transfer(I8257Regs *r)
+{
+    return (r->mode & 0x0c) == 0;
+}
+
 static int i8257_dma_read_memory(IsaDma *obj, int nchan, void *buf, int pos,
                                  int len)
 {
@@ -407,6 +406,10 @@ static int i8257_dma_read_memory(IsaDma *obj, int nchan, void *buf, int pos,
     I8257Regs *r = &d->regs[nchan & 3];
     hwaddr addr = ((r->pageh & 0x7f) << 24) | (r->page << 16) | r->now[ADDR];
 
+    if (i8257_is_verify_transfer(r)) {
+        return len;
+    }
+
     if (r->mode & 0x20) {
         int i;
         uint8_t *p = buf;
@@ -431,6 +434,10 @@ static int i8257_dma_write_memory(IsaDma *obj, int nchan, void *buf, int pos,
     I8257Regs *r = &s->regs[nchan & 3];
     hwaddr addr = ((r->pageh & 0x7f) << 24) | (r->page << 16) | r->now[ADDR];
 
+    if (i8257_is_verify_transfer(r)) {
+        return len;
+    }
+
     if (r->mode & 0x20) {
         int i;
         uint8_t *p = buf;
@@ -597,7 +604,6 @@ static void i8257_class_init(ObjectClass *klass, void *data)
     dc->vmsd = &vmstate_i8257;
     dc->props = i8257_properties;
 
-    idc->get_transfer_mode = i8257_dma_get_transfer_mode;
     idc->has_autoinitialization = i8257_dma_has_autoinitialization;
     idc->read_memory = i8257_dma_read_memory;
     idc->write_memory = i8257_dma_write_memory;
diff --git a/include/hw/isa/isa.h b/include/hw/isa/isa.h
index 018ada4f6f..f516e253c5 100644
--- a/include/hw/isa/isa.h
+++ b/include/hw/isa/isa.h
@@ -56,7 +56,6 @@ typedef int (*IsaDmaTransferHandler)(void *opaque, int nchan, int pos,
 typedef struct IsaDmaClass {
     InterfaceClass parent;
 
-    IsaDmaTransferMode (*get_transfer_mode)(IsaDma *obj, int nchan);
     bool (*has_autoinitialization)(IsaDma *obj, int nchan);
     int (*read_memory)(IsaDma *obj, int nchan, void *buf, int pos, int len);
     int (*write_memory)(IsaDma *obj, int nchan, void *buf, int pos, int len);
-- 
2.23.0


Re: [PATCH v2] fdc/i8257: implement verify transfer mode
Posted by Hervé Poussineau 4 years, 4 months ago
Le 30/10/2019 à 09:28, Sven Schnelle a écrit :
> While working on the Tulip driver i tried to write some Teledisk images to
> a floppy image which didn't work. Turned out that Teledisk checks the written
> data by issuing a READ command to the FDC but running the DMA controller
> in VERIFY mode. As we ignored the DMA request in that case, the DMA transfer
> never finished, and Teledisk reported an error.
> 
> The i8257 spec says about verify transfers:
> 
> 3) DMA verify, which does not actually involve the transfer of data. When an
> 8257 channel is in the DMA verify mode, it will respond the same as described
> for transfer operations, except that no memory or I/O read/write control signals
> will be generated.
> 
> Hervé proposed to remove all the dma_mode_ok stuff from fdc to have a more
> clear boundary between DMA and FDC, so this patch also does that.
> 
> Suggested-by: Hervé Poussineau <hpoussin@reactos.org>
> Signed-off-by: Sven Schnelle <svens@stackframe.org>
> ---
>   hw/block/fdc.c       | 39 +++++++++++++++------------------------
>   hw/dma/i8257.c       | 20 +++++++++++++-------
>   include/hw/isa/isa.h |  1 -
>   3 files changed, 28 insertions(+), 32 deletions(-)
> 
> diff --git a/hw/block/fdc.c b/hw/block/fdc.c
> index ac5d31e8c1..18fd22bfb7 100644
> --- a/hw/block/fdc.c
> +++ b/hw/block/fdc.c
> @@ -1716,9 +1716,8 @@ static void fdctrl_start_transfer(FDCtrl *fdctrl, int direction)
>       if (fdctrl->dor & FD_DOR_DMAEN) {
>           IsaDmaTransferMode dma_mode;

You need to remove this dma_mode variable because you don't set it anymore.

>           IsaDmaClass *k = ISADMA_GET_CLASS(fdctrl->dma);
> -        bool dma_mode_ok;
> +
>           /* DMA transfer are enabled. Check if DMA channel is well programmed */

Second part of this comment should be removed.

> -        dma_mode = k->get_transfer_mode(fdctrl->dma, fdctrl->dma_chann);
>           FLOPPY_DPRINTF("dma_mode=%d direction=%d (%d - %d)\n",
>                          dma_mode, direction,
>                          (128 << fdctrl->fifo[5]) *

You need to remove dma_mode variable from printf statement, as you removed the variable.

> @@ -1727,40 +1726,32 @@ static void fdctrl_start_transfer(FDCtrl *fdctrl, int direction)
>           case FD_DIR_SCANE:
>           case FD_DIR_SCANL:
>           case FD_DIR_SCANH:
> -            dma_mode_ok = (dma_mode == ISADMA_TRANSFER_VERIFY);
>               break;
>           case FD_DIR_WRITE:
> -            dma_mode_ok = (dma_mode == ISADMA_TRANSFER_WRITE);
>               break;
>           case FD_DIR_READ:
> -            dma_mode_ok = (dma_mode == ISADMA_TRANSFER_READ);
>               break;
>           case FD_DIR_VERIFY:
> -            dma_mode_ok = true;
>               break;
>           default:
> -            dma_mode_ok = false;
>               break;
>           }

Now that you have removed the dma_mode_ok instructions, you have a switch where all cases do nothing.
Please completly remove the switch statement.

> -        if (dma_mode_ok) {
> -            /* No access is allowed until DMA transfer has completed */
> -            fdctrl->msr &= ~FD_MSR_RQM;
> -            if (direction != FD_DIR_VERIFY) {
> -                /* Now, we just have to wait for the DMA controller to
> -                 * recall us...
> -                 */
> -                k->hold_DREQ(fdctrl->dma, fdctrl->dma_chann);
> -                k->schedule(fdctrl->dma);
> -            } else {
> -                /* Start transfer */
> -                fdctrl_transfer_handler(fdctrl, fdctrl->dma_chann, 0,
> -                                        fdctrl->data_len);
> -            }
> -            return;
> +
> +        /* No access is allowed until DMA transfer has completed */
> +        fdctrl->msr &= ~FD_MSR_RQM;
> +        if (direction != FD_DIR_VERIFY) {
> +            /*
> +             * Now, we just have to wait for the DMA controller to
> +             * recall us...
> +             */
> +            k->hold_DREQ(fdctrl->dma, fdctrl->dma_chann);
> +            k->schedule(fdctrl->dma);
>           } else {
> -            FLOPPY_DPRINTF("bad dma_mode=%d direction=%d\n", dma_mode,
> -                           direction);
> +            /* Start transfer */
> +            fdctrl_transfer_handler(fdctrl, fdctrl->dma_chann, 0,
> +                    fdctrl->data_len);
>           }
> +        return;
>       }
>       FLOPPY_DPRINTF("start non-DMA transfer\n");
>       fdctrl->msr |= FD_MSR_NONDMA | FD_MSR_RQM;
> diff --git a/hw/dma/i8257.c b/hw/dma/i8257.c
> index 792f617eb4..85dad3d391 100644
> --- a/hw/dma/i8257.c
> +++ b/hw/dma/i8257.c
> @@ -292,12 +292,6 @@ static uint64_t i8257_read_cont(void *opaque, hwaddr nport, unsigned size)
>       return val;
>   }
>   
> -static IsaDmaTransferMode i8257_dma_get_transfer_mode(IsaDma *obj, int nchan)
> -{
> -    I8257State *d = I8257(obj);
> -    return (d->regs[nchan & 3].mode >> 2) & 3;
> -}
> -
>   static bool i8257_dma_has_autoinitialization(IsaDma *obj, int nchan)
>   {
>       I8257State *d = I8257(obj);
> @@ -400,6 +394,11 @@ static void i8257_dma_register_channel(IsaDma *obj, int nchan,
>       r->opaque = opaque;
>   }
>   
> +static bool i8257_is_verify_transfer(I8257Regs *r)
> +{
> +    return (r->mode & 0x0c) == 0;
> +}
> +
>   static int i8257_dma_read_memory(IsaDma *obj, int nchan, void *buf, int pos,
>                                    int len)
>   {
> @@ -407,6 +406,10 @@ static int i8257_dma_read_memory(IsaDma *obj, int nchan, void *buf, int pos,
>       I8257Regs *r = &d->regs[nchan & 3];
>       hwaddr addr = ((r->pageh & 0x7f) << 24) | (r->page << 16) | r->now[ADDR];
>   
> +    if (i8257_is_verify_transfer(r)) {
> +        return len;
> +    }
> +
>       if (r->mode & 0x20) {
>           int i;
>           uint8_t *p = buf;
> @@ -431,6 +434,10 @@ static int i8257_dma_write_memory(IsaDma *obj, int nchan, void *buf, int pos,
>       I8257Regs *r = &s->regs[nchan & 3];
>       hwaddr addr = ((r->pageh & 0x7f) << 24) | (r->page << 16) | r->now[ADDR];
>   
> +    if (i8257_is_verify_transfer(r)) {
> +        return len;
> +    }
> +
>       if (r->mode & 0x20) {
>           int i;
>           uint8_t *p = buf;
> @@ -597,7 +604,6 @@ static void i8257_class_init(ObjectClass *klass, void *data)
>       dc->vmsd = &vmstate_i8257;
>       dc->props = i8257_properties;
>   
> -    idc->get_transfer_mode = i8257_dma_get_transfer_mode;
>       idc->has_autoinitialization = i8257_dma_has_autoinitialization;
>       idc->read_memory = i8257_dma_read_memory;
>       idc->write_memory = i8257_dma_write_memory;
> diff --git a/include/hw/isa/isa.h b/include/hw/isa/isa.h
> index 018ada4f6f..f516e253c5 100644
> --- a/include/hw/isa/isa.h
> +++ b/include/hw/isa/isa.h
> @@ -56,7 +56,6 @@ typedef int (*IsaDmaTransferHandler)(void *opaque, int nchan, int pos,
>   typedef struct IsaDmaClass {
>       InterfaceClass parent;
>   
> -    IsaDmaTransferMode (*get_transfer_mode)(IsaDma *obj, int nchan);
>       bool (*has_autoinitialization)(IsaDma *obj, int nchan);
>       int (*read_memory)(IsaDma *obj, int nchan, void *buf, int pos, int len);
>       int (*write_memory)(IsaDma *obj, int nchan, void *buf, int pos, int len);
> 

Otherwise, the i8257.c parts look good. This might fix some other devices (except fdc) which might use VERIFY mode.

Hervé

Re: [PATCH v2] fdc/i8257: implement verify transfer mode
Posted by John Snow 4 years, 4 months ago

On 11/1/19 6:54 AM, Hervé Poussineau wrote:
> Le 30/10/2019 à 09:28, Sven Schnelle a écrit :
>> While working on the Tulip driver i tried to write some Teledisk
>> images to
>> a floppy image which didn't work. Turned out that Teledisk checks the
>> written
>> data by issuing a READ command to the FDC but running the DMA controller
>> in VERIFY mode. As we ignored the DMA request in that case, the DMA
>> transfer
>> never finished, and Teledisk reported an error.
>>
>> The i8257 spec says about verify transfers:
>>
>> 3) DMA verify, which does not actually involve the transfer of data.
>> When an
>> 8257 channel is in the DMA verify mode, it will respond the same as
>> described
>> for transfer operations, except that no memory or I/O read/write
>> control signals
>> will be generated.
>>
>> Hervé proposed to remove all the dma_mode_ok stuff from fdc to have a
>> more
>> clear boundary between DMA and FDC, so this patch also does that.
>>
>> Suggested-by: Hervé Poussineau <hpoussin@reactos.org>
>> Signed-off-by: Sven Schnelle <svens@stackframe.org>
>> ---
>>   hw/block/fdc.c       | 39 +++++++++++++++------------------------
>>   hw/dma/i8257.c       | 20 +++++++++++++-------
>>   include/hw/isa/isa.h |  1 -
>>   3 files changed, 28 insertions(+), 32 deletions(-)
>>
>> diff --git a/hw/block/fdc.c b/hw/block/fdc.c
>> index ac5d31e8c1..18fd22bfb7 100644
>> --- a/hw/block/fdc.c
>> +++ b/hw/block/fdc.c
>> @@ -1716,9 +1716,8 @@ static void fdctrl_start_transfer(FDCtrl
>> *fdctrl, int direction)
>>       if (fdctrl->dor & FD_DOR_DMAEN) {
>>           IsaDmaTransferMode dma_mode;
> 
> You need to remove this dma_mode variable because you don't set it anymore.
> 
>>           IsaDmaClass *k = ISADMA_GET_CLASS(fdctrl->dma);
>> -        bool dma_mode_ok;
>> +
>>           /* DMA transfer are enabled. Check if DMA channel is well
>> programmed */
> 
> Second part of this comment should be removed.
> 
>> -        dma_mode = k->get_transfer_mode(fdctrl->dma, fdctrl->dma_chann);
>>           FLOPPY_DPRINTF("dma_mode=%d direction=%d (%d - %d)\n",
>>                          dma_mode, direction,
>>                          (128 << fdctrl->fifo[5]) *
> 
> You need to remove dma_mode variable from printf statement, as you
> removed the variable.
> 
>> @@ -1727,40 +1726,32 @@ static void fdctrl_start_transfer(FDCtrl
>> *fdctrl, int direction)
>>           case FD_DIR_SCANE:
>>           case FD_DIR_SCANL:
>>           case FD_DIR_SCANH:
>> -            dma_mode_ok = (dma_mode == ISADMA_TRANSFER_VERIFY);
>>               break;
>>           case FD_DIR_WRITE:
>> -            dma_mode_ok = (dma_mode == ISADMA_TRANSFER_WRITE);
>>               break;
>>           case FD_DIR_READ:
>> -            dma_mode_ok = (dma_mode == ISADMA_TRANSFER_READ);
>>               break;
>>           case FD_DIR_VERIFY:
>> -            dma_mode_ok = true;
>>               break;
>>           default:
>> -            dma_mode_ok = false;
>>               break;
>>           }
> 
> Now that you have removed the dma_mode_ok instructions, you have a
> switch where all cases do nothing.
> Please completly remove the switch statement.
> 
>> -        if (dma_mode_ok) {
>> -            /* No access is allowed until DMA transfer has completed */
>> -            fdctrl->msr &= ~FD_MSR_RQM;
>> -            if (direction != FD_DIR_VERIFY) {
>> -                /* Now, we just have to wait for the DMA controller to
>> -                 * recall us...
>> -                 */
>> -                k->hold_DREQ(fdctrl->dma, fdctrl->dma_chann);
>> -                k->schedule(fdctrl->dma);
>> -            } else {
>> -                /* Start transfer */
>> -                fdctrl_transfer_handler(fdctrl, fdctrl->dma_chann, 0,
>> -                                        fdctrl->data_len);
>> -            }
>> -            return;
>> +
>> +        /* No access is allowed until DMA transfer has completed */
>> +        fdctrl->msr &= ~FD_MSR_RQM;
>> +        if (direction != FD_DIR_VERIFY) {
>> +            /*
>> +             * Now, we just have to wait for the DMA controller to
>> +             * recall us...
>> +             */
>> +            k->hold_DREQ(fdctrl->dma, fdctrl->dma_chann);
>> +            k->schedule(fdctrl->dma);
>>           } else {
>> -            FLOPPY_DPRINTF("bad dma_mode=%d direction=%d\n", dma_mode,
>> -                           direction);
>> +            /* Start transfer */
>> +            fdctrl_transfer_handler(fdctrl, fdctrl->dma_chann, 0,
>> +                    fdctrl->data_len);
>>           }
>> +        return;
>>       }
>>       FLOPPY_DPRINTF("start non-DMA transfer\n");
>>       fdctrl->msr |= FD_MSR_NONDMA | FD_MSR_RQM;
>> diff --git a/hw/dma/i8257.c b/hw/dma/i8257.c
>> index 792f617eb4..85dad3d391 100644
>> --- a/hw/dma/i8257.c
>> +++ b/hw/dma/i8257.c
>> @@ -292,12 +292,6 @@ static uint64_t i8257_read_cont(void *opaque,
>> hwaddr nport, unsigned size)
>>       return val;
>>   }
>>   -static IsaDmaTransferMode i8257_dma_get_transfer_mode(IsaDma *obj,
>> int nchan)
>> -{
>> -    I8257State *d = I8257(obj);
>> -    return (d->regs[nchan & 3].mode >> 2) & 3;
>> -}
>> -
>>   static bool i8257_dma_has_autoinitialization(IsaDma *obj, int nchan)
>>   {
>>       I8257State *d = I8257(obj);
>> @@ -400,6 +394,11 @@ static void i8257_dma_register_channel(IsaDma
>> *obj, int nchan,
>>       r->opaque = opaque;
>>   }
>>   +static bool i8257_is_verify_transfer(I8257Regs *r)
>> +{
>> +    return (r->mode & 0x0c) == 0;
>> +}
>> +
>>   static int i8257_dma_read_memory(IsaDma *obj, int nchan, void *buf,
>> int pos,
>>                                    int len)
>>   {
>> @@ -407,6 +406,10 @@ static int i8257_dma_read_memory(IsaDma *obj, int
>> nchan, void *buf, int pos,
>>       I8257Regs *r = &d->regs[nchan & 3];
>>       hwaddr addr = ((r->pageh & 0x7f) << 24) | (r->page << 16) |
>> r->now[ADDR];
>>   +    if (i8257_is_verify_transfer(r)) {
>> +        return len;
>> +    }
>> +
>>       if (r->mode & 0x20) {
>>           int i;
>>           uint8_t *p = buf;
>> @@ -431,6 +434,10 @@ static int i8257_dma_write_memory(IsaDma *obj,
>> int nchan, void *buf, int pos,
>>       I8257Regs *r = &s->regs[nchan & 3];
>>       hwaddr addr = ((r->pageh & 0x7f) << 24) | (r->page << 16) |
>> r->now[ADDR];
>>   +    if (i8257_is_verify_transfer(r)) {
>> +        return len;
>> +    }
>> +
>>       if (r->mode & 0x20) {
>>           int i;
>>           uint8_t *p = buf;
>> @@ -597,7 +604,6 @@ static void i8257_class_init(ObjectClass *klass,
>> void *data)
>>       dc->vmsd = &vmstate_i8257;
>>       dc->props = i8257_properties;
>>   -    idc->get_transfer_mode = i8257_dma_get_transfer_mode;
>>       idc->has_autoinitialization = i8257_dma_has_autoinitialization;
>>       idc->read_memory = i8257_dma_read_memory;
>>       idc->write_memory = i8257_dma_write_memory;
>> diff --git a/include/hw/isa/isa.h b/include/hw/isa/isa.h
>> index 018ada4f6f..f516e253c5 100644
>> --- a/include/hw/isa/isa.h
>> +++ b/include/hw/isa/isa.h
>> @@ -56,7 +56,6 @@ typedef int (*IsaDmaTransferHandler)(void *opaque,
>> int nchan, int pos,
>>   typedef struct IsaDmaClass {
>>       InterfaceClass parent;
>>   -    IsaDmaTransferMode (*get_transfer_mode)(IsaDma *obj, int nchan);
>>       bool (*has_autoinitialization)(IsaDma *obj, int nchan);
>>       int (*read_memory)(IsaDma *obj, int nchan, void *buf, int pos,
>> int len);
>>       int (*write_memory)(IsaDma *obj, int nchan, void *buf, int pos,
>> int len);
>>
> 
> Otherwise, the i8257.c parts look good. This might fix some other
> devices (except fdc) which might use VERIFY mode.
> 
> Hervé

Thanks for the look, Hervé!

(Hey, do you want the Floppy device maintainership?)

--js