Series comparison

target-arm queue for softfreeze: this is quite big as I
was on holiday last week, so this is all just sneaking in
under the wire. I particularly wanted to get Philippe's
patches in before freeze as that sort of code-movement
patchset is painful to have to rebase.

thanks
-- PMM

The following changes since commit ae9108f8f0746ce64d02afb1a216153a50926132:

Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-4.1-pull-request' into staging (2019-07-01 15:55:40 +0100)

are available in the Git repository at:

https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20190701

for you to fetch changes up to 787a7e76c2e93a48c47b324fea592c9910a70483:

target/arm: Declare some M-profile functions publicly (2019-07-01 17:29:01 +0100)

----------------------------------------------------------------
target-arm queue:
 * hw/arm/boot: fix direct kernel boot with initrd
 * hw/arm/msf2-som: Exit when the cpu is not the expected one
 * i.mx7: fix bugs in PCI controller needed to boot recent kernels
 * aspeed: add RTC device
 * aspeed: fix some timer device bugs
 * aspeed: add swift-bmc board
 * aspeed: vic: Add support for legacy register interface
 * aspeed: add aspeed-xdma device
 * Add new sbsa-ref board for aarch64
 * target/arm: code refactoring in preparation for support of
   compilation with TCG disabled

----------------------------------------------------------------
Adriana Kobylak (1):
      aspeed: Add support for the swift-bmc board

Andrew Jeffery (3):
      aspeed/timer: Status register contains reload for stopped timer
      aspeed/timer: Fix match calculations
      aspeed: vic: Add support for legacy register interface

Andrew Jones (1):
      hw/arm/boot: fix direct kernel boot with initrd

Andrey Smirnov (5):
      i.mx7d: Add no-op/unimplemented APBH DMA module
      i.mx7d: Add no-op/unimplemented PCIE PHY IP block
      pci: designware: Update MSI mapping unconditionally
      pci: designware: Update MSI mapping when MSI address changes
      i.mx7d: pci: Update PCI IRQ mapping to match HW

Christian Svensson (1):
      aspeed/timer: Ensure positive muldiv delta

Cédric Le Goater (7):
      aspeed: add a per SoC mapping for the interrupt space
      aspeed: add a per SoC mapping for the memory space
      aspeed: introduce a configurable number of CPU per machine
      aspeed: add support for multiple NICs
      aspeed: remove the "ram" link
      aspeed: add a RAM memory region container
      aspeed/smc: add a 'sdram_base' property

Eddie James (1):
      hw/misc/aspeed_xdma: New device

Hongbo Zhang (2):
      hw/arm: Add arm SBSA reference machine, skeleton part
      hw/arm: Add arm SBSA reference machine, devices part

Jan Kiszka (1):
      hw/arm/virt: Add support for Cortex-A7

Joel Stanley (4):
      hw: timer: Add ASPEED RTC device
      hw/arm/aspeed: Add RTC to SoC
      aspeed/timer: Fix behaviour running Linux
      aspeed: Link SCU to the watchdog

Philippe Mathieu-Daudé (19):
      hw/arm/msf2-som: Exit when the cpu is not the expected one
      target/arm: Makefile cleanup (Aarch64)
      target/arm: Makefile cleanup (ARM)
      target/arm: Makefile cleanup (KVM)
      target/arm: Makefile cleanup (softmmu)
      target/arm: Add copyright boilerplate
      target/arm/helper: Remove unused include
      target/arm: Fix multiline comment syntax
      target/arm: Fix coding style issues
      target/arm: Move CPU state dumping routines to cpu.c
      target/arm: Declare get_phys_addr() function publicly
      target/arm: Move TLB related routines to tlb_helper.c
      target/arm/vfp_helper: Move code around
      target/arm/vfp_helper: Extract vfp_set_fpscr_to_host()
      target/arm/vfp_helper: Extract vfp_set_fpscr_from_host()
      target/arm/vfp_helper: Restrict the SoftFloat use to TCG
      target/arm: Restrict PSCI to TCG
      target/arm: Declare arm_log_exception() function publicly
      target/arm: Declare some M-profile functions publicly

Samuel Ortiz (1):
      target/arm: Move the DC ZVA helper into op_helper

From: Andrew Jones <drjones@redhat.com>

Fix the condition used to check whether the initrd fits
into RAM; in some cases if an initrd was also passed on
the command line we would get an error stating that it
was too big to fit into RAM after the kernel. Despite the
error the loader continued anyway, though, so also add an
exit(1) when the initrd is actually too big.

Fixes: 852dc64d665f ("hw/arm/boot: Diagnose layouts that put initrd or
DTB off the end of RAM")
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190618125844.4863-1-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/boot.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/hw/arm/boot.c b/hw/arm/boot.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/boot.c
+++ b/hw/arm/boot.c
@@ -XXX,XX +XXX,XX @@ static void arm_setup_direct_kernel_boot(ARMCPU *cpu,
                              info->initrd_filename);
                 exit(1);
             }
-            if (info->initrd_start + initrd_size > info->ram_size) {
+            if (info->initrd_start + initrd_size > ram_end) {
                 error_report("could not load initrd '%s': "
                              "too big to fit into RAM after the kernel",
                              info->initrd_filename);
+                exit(1);
             }
         } else {
             initrd_size = 0;
-- 
2.20.1

From: Philippe Mathieu-Daudé <philmd@redhat.com>

This machine correctly defines its default_cpu_type to cortex-m3
and report an error if the user requested another cpu_type,
however it does not exit, and this can confuse users trying
to use another core:

$ qemu-system-arm -M emcraft-sf2 -cpu cortex-m4 -kernel test-m4.elf
  qemu-system-arm: This board can only be used with CPU cortex-m3-arm-cpu
  [output related to M3 core ...]

The CPU is indeed a M3 core:

(qemu) info qom-tree
  /machine (emcraft-sf2-machine)
    /unattached (container)
      /device[0] (msf2-soc)
        /armv7m (armv7m)
          /cpu (cortex-m3-arm-cpu)

Add the missing exit() call to return to the shell.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-id: 20190617160136.29930-1-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/msf2-som.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/hw/arm/msf2-som.c b/hw/arm/msf2-som.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/msf2-som.c
+++ b/hw/arm/msf2-som.c
@@ -XXX,XX +XXX,XX @@ static void emcraft_sf2_s2s010_init(MachineState *machine)
     if (strcmp(machine->cpu_type, mc->default_cpu_type) != 0) {
         error_report("This board can only be used with CPU %s",
                      mc->default_cpu_type);
+        exit(1);
     }
 
     memory_region_init_ram(ddr, NULL, "ddr-ram", DDR_SIZE,
-- 
2.20.1

From: Andrey Smirnov <andrew.smirnov@gmail.com>

Instantiate no-op APBH DMA module. Needed to boot latest Linux kernel.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/arm/fsl-imx7.h | 3 +++
 hw/arm/fsl-imx7.c         | 6 ++++++
 2 files changed, 9 insertions(+)

diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx7.h
+++ b/include/hw/arm/fsl-imx7.h
@@ -XXX,XX +XXX,XX @@ enum FslIMX7MemoryMap {
     FSL_IMX7_PCIE_REG_SIZE        = 16 * 1024,
 
     FSL_IMX7_GPR_ADDR             = 0x30340000,
+
+    FSL_IMX7_DMA_APBH_ADDR        = 0x33000000,
+    FSL_IMX7_DMA_APBH_SIZE        = 0x2000,
 };
 
 enum FslIMX7IRQs {
diff --git a/hw/arm/fsl-imx7.c b/hw/arm/fsl-imx7.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx7.c
+++ b/hw/arm/fsl-imx7.c
@@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp)
      */
     create_unimplemented_device("lcdif", FSL_IMX7_LCDIF_ADDR,
                                 FSL_IMX7_LCDIF_SIZE);
+
+    /*
+     * DMA APBH
+     */
+    create_unimplemented_device("dma-apbh", FSL_IMX7_DMA_APBH_ADDR,
+                                FSL_IMX7_DMA_APBH_SIZE);
 }
 
 static void fsl_imx7_class_init(ObjectClass *oc, void *data)
-- 
2.20.1

From: Andrey Smirnov <andrew.smirnov@gmail.com>

Add no-op/unimplemented PCIE PHY IP block. Needed by new kernels to
use PCIE.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/arm/fsl-imx7.h | 3 +++
 hw/arm/fsl-imx7.c         | 5 +++++
 2 files changed, 8 insertions(+)

diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx7.h
+++ b/include/hw/arm/fsl-imx7.h
@@ -XXX,XX +XXX,XX @@ enum FslIMX7MemoryMap {
     FSL_IMX7_ADC2_ADDR            = 0x30620000,
     FSL_IMX7_ADCn_SIZE            = 0x1000,
 
+    FSL_IMX7_PCIE_PHY_ADDR        = 0x306D0000,
+    FSL_IMX7_PCIE_PHY_SIZE        = 0x10000,
+
     FSL_IMX7_GPC_ADDR             = 0x303A0000,
 
     FSL_IMX7_I2C1_ADDR            = 0x30A20000,
diff --git a/hw/arm/fsl-imx7.c b/hw/arm/fsl-imx7.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx7.c
+++ b/hw/arm/fsl-imx7.c
@@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp)
      */
     create_unimplemented_device("dma-apbh", FSL_IMX7_DMA_APBH_ADDR,
                                 FSL_IMX7_DMA_APBH_SIZE);
+    /*
+     * PCIe PHY
+     */
+    create_unimplemented_device("pcie-phy", FSL_IMX7_PCIE_PHY_ADDR,
+                                FSL_IMX7_PCIE_PHY_SIZE);
 }
 
 static void fsl_imx7_class_init(ObjectClass *oc, void *data)
-- 
2.20.1

From: Andrey Smirnov <andrew.smirnov@gmail.com>

Expression to calculate update_msi_mapping in code handling writes to
DESIGNWARE_PCIE_MSI_INTR0_ENABLE is missing an ! operator and should
be:

!!root->msi.intr[0].enable ^ !!val;

so that MSI mapping is updated when enabled transitions from either
"none" -> "any" or "any" -> "none". Since that register shouldn't be
written to very often, change the code to update MSI mapping
unconditionally instead of trying to fix the update_msi_mapping logic.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/pci-host/designware.c | 10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)

diff --git a/hw/pci-host/designware.c b/hw/pci-host/designware.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/pci-host/designware.c
+++ b/hw/pci-host/designware.c
@@ -XXX,XX +XXX,XX @@ static void designware_pcie_root_config_write(PCIDevice *d, uint32_t address,
         root->msi.base |= (uint64_t)val << 32;
         break;
 
-    case DESIGNWARE_PCIE_MSI_INTR0_ENABLE: {
-        const bool update_msi_mapping = !root->msi.intr[0].enable ^ !!val;
-
+    case DESIGNWARE_PCIE_MSI_INTR0_ENABLE:
         root->msi.intr[0].enable = val;
-
-        if (update_msi_mapping) {
-            designware_pcie_root_update_msi_mapping(root);
-        }
+        designware_pcie_root_update_msi_mapping(root);
         break;
-    }
 
     case DESIGNWARE_PCIE_MSI_INTR0_MASK:
         root->msi.intr[0].mask = val;
-- 
2.20.1

From: Andrey Smirnov <andrew.smirnov@gmail.com>

MSI mapping needs to be update when MSI address changes, so add the
code to do so.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/pci-host/designware.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/hw/pci-host/designware.c b/hw/pci-host/designware.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/pci-host/designware.c
+++ b/hw/pci-host/designware.c
@@ -XXX,XX +XXX,XX @@ static void designware_pcie_root_config_write(PCIDevice *d, uint32_t address,
     case DESIGNWARE_PCIE_MSI_ADDR_LO:
         root->msi.base &= 0xFFFFFFFF00000000ULL;
         root->msi.base |= val;
+        designware_pcie_root_update_msi_mapping(root);
         break;
 
     case DESIGNWARE_PCIE_MSI_ADDR_HI:
         root->msi.base &= 0x00000000FFFFFFFFULL;
         root->msi.base |= (uint64_t)val << 32;
+        designware_pcie_root_update_msi_mapping(root);
         break;
 
     case DESIGNWARE_PCIE_MSI_INTR0_ENABLE:
-- 
2.20.1

From: Andrey Smirnov <andrew.smirnov@gmail.com>

Datasheet for i.MX7 is incorrect and i.MX7's PCI IRQ mapping matches
that of i.MX6:

* INTD/MSI    122
    * INTC        123
    * INTB        124
    * INTA        125

Fix all of the relevant code to reflect that fact. Needed by latest
Linux kernels.

(Reference: Linux kernel commit 538d6e9d597584e80 from an
NXP employee confirming that the datasheet is incorrect and
with a report of a test against hardware.)

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: added ref to kernel commit confirming the datasheet error]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/arm/fsl-imx7.h | 8 ++++----
 hw/pci-host/designware.c  | 6 ++++--
 2 files changed, 8 insertions(+), 6 deletions(-)

diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx7.h
+++ b/include/hw/arm/fsl-imx7.h
@@ -XXX,XX +XXX,XX @@ enum FslIMX7IRQs {
     FSL_IMX7_USB2_IRQ     = 42,
     FSL_IMX7_USB3_IRQ     = 40,
 
-    FSL_IMX7_PCI_INTA_IRQ = 122,
-    FSL_IMX7_PCI_INTB_IRQ = 123,
-    FSL_IMX7_PCI_INTC_IRQ = 124,
-    FSL_IMX7_PCI_INTD_IRQ = 125,
+    FSL_IMX7_PCI_INTA_IRQ = 125,
+    FSL_IMX7_PCI_INTB_IRQ = 124,
+    FSL_IMX7_PCI_INTC_IRQ = 123,
+    FSL_IMX7_PCI_INTD_IRQ = 122,
 
     FSL_IMX7_UART7_IRQ    = 126,
 
diff --git a/hw/pci-host/designware.c b/hw/pci-host/designware.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/pci-host/designware.c
+++ b/hw/pci-host/designware.c
@@ -XXX,XX +XXX,XX @@
 #define DESIGNWARE_PCIE_ATU_DEVFN(x)               (((x) >> 16) & 0xff)
 #define DESIGNWARE_PCIE_ATU_UPPER_TARGET           0x91C
 
+#define DESIGNWARE_PCIE_IRQ_MSI                    3
+
 static DesignwarePCIEHost *
 designware_pcie_root_to_host(DesignwarePCIERoot *root)
 {
@@ -XXX,XX +XXX,XX @@ static void designware_pcie_root_msi_write(void *opaque, hwaddr addr,
     root->msi.intr[0].status |= BIT(val) & root->msi.intr[0].enable;
 
     if (root->msi.intr[0].status & ~root->msi.intr[0].mask) {
-        qemu_set_irq(host->pci.irqs[0], 1);
+        qemu_set_irq(host->pci.irqs[DESIGNWARE_PCIE_IRQ_MSI], 1);
     }
 }
 
@@ -XXX,XX +XXX,XX @@ static void designware_pcie_root_config_write(PCIDevice *d, uint32_t address,
     case DESIGNWARE_PCIE_MSI_INTR0_STATUS:
         root->msi.intr[0].status ^= val;
         if (!root->msi.intr[0].status) {
-            qemu_set_irq(host->pci.irqs[0], 0);
+            qemu_set_irq(host->pci.irqs[DESIGNWARE_PCIE_IRQ_MSI], 0);
         }
         break;
 
-- 
2.20.1

From: Cédric Le Goater <clg@kaod.org>

This will simplify the definition of new SoCs, like the AST2600 which
should use a different CPU and a different IRQ number layout.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 20190618165311.27066-2-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/arm/aspeed_soc.h | 36 +++++++++++++++++++++++
 hw/arm/aspeed_soc.c         | 57 +++++++++++++++++++++++++++++++------
 2 files changed, 85 insertions(+), 8 deletions(-)

From: Cédric Le Goater <clg@kaod.org>

This will simplify the definition of new SoCs, like the AST2600 which
should use a slightly different address space and have a different set
of controllers.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 20190618165311.27066-3-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/arm/aspeed_soc.h |   4 +-
 hw/arm/aspeed.c             |   8 +--
 hw/arm/aspeed_soc.c         | 117 ++++++++++++++++++++++--------------
 3 files changed, 78 insertions(+), 51 deletions(-)

diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/aspeed_soc.h
+++ b/include/hw/arm/aspeed_soc.h
@@ -XXX,XX +XXX,XX @@ typedef struct AspeedSoCInfo {
     const char *name;
     const char *cpu_type;
     uint32_t silicon_rev;
-    hwaddr sdram_base;
     uint64_t sram_size;
     int spis_num;
-    const hwaddr *spi_bases;
     const char *fmc_typename;
     const char **spi_typename;
     int wdts_num;
     const int *irqmap;
+    const hwaddr *memmap;
 } AspeedSoCInfo;
 
 typedef struct AspeedSoCClass {
@@ -XXX,XX +XXX,XX @@ enum {
     ASPEED_I2C,
     ASPEED_ETH1,
     ASPEED_ETH2,
+    ASPEED_SDRAM,
 };
 
 #endif /* ASPEED_SOC_H */
diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/aspeed.c
+++ b/hw/arm/aspeed.c
@@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine,
                                         &error_abort);
 
     memory_region_allocate_system_memory(&bmc->ram, NULL, "ram", ram_size);
-    memory_region_add_subregion(get_system_memory(), sc->info->sdram_base,
-                                &bmc->ram);
+    memory_region_add_subregion(get_system_memory(),
+                                sc->info->memmap[ASPEED_SDRAM], &bmc->ram);
     object_property_add_const_link(OBJECT(&bmc->soc), "ram", OBJECT(&bmc->ram),
                                    &error_abort);
 
@@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine,
     memory_region_init_io(&bmc->max_ram, NULL, &max_ram_ops, NULL,
                           "max_ram", max_ram_size  - ram_size);
     memory_region_add_subregion(get_system_memory(),
-                                sc->info->sdram_base + ram_size,
+                                sc->info->memmap[ASPEED_SDRAM] + ram_size,
                                 &bmc->max_ram);
 
     aspeed_board_init_flashes(&bmc->soc.fmc, cfg->fmc_model, &error_abort);
@@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine,
     aspeed_board_binfo.initrd_filename = machine->initrd_filename;
     aspeed_board_binfo.kernel_cmdline = machine->kernel_cmdline;
     aspeed_board_binfo.ram_size = ram_size;
-    aspeed_board_binfo.loader_start = sc->info->sdram_base;
+    aspeed_board_binfo.loader_start = sc->info->memmap[ASPEED_SDRAM];
 
     if (cfg->i2c_init) {
         cfg->i2c_init(bmc);
diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/aspeed_soc.c
+++ b/hw/arm/aspeed_soc.c
@@ -XXX,XX +XXX,XX @@
 #include "hw/i2c/aspeed_i2c.h"
 #include "net/net.h"
 
-#define ASPEED_SOC_UART_5_BASE      0x00184000
 #define ASPEED_SOC_IOMEM_SIZE       0x00200000
-#define ASPEED_SOC_IOMEM_BASE       0x1E600000
-#define ASPEED_SOC_FMC_BASE         0x1E620000
-#define ASPEED_SOC_SPI_BASE         0x1E630000
-#define ASPEED_SOC_SPI2_BASE        0x1E631000
-#define ASPEED_SOC_VIC_BASE         0x1E6C0000
-#define ASPEED_SOC_SDMC_BASE        0x1E6E0000
-#define ASPEED_SOC_SCU_BASE         0x1E6E2000
-#define ASPEED_SOC_SRAM_BASE        0x1E720000
-#define ASPEED_SOC_TIMER_BASE       0x1E782000
-#define ASPEED_SOC_WDT_BASE         0x1E785000
-#define ASPEED_SOC_I2C_BASE         0x1E78A000
-#define ASPEED_SOC_ETH1_BASE        0x1E660000
-#define ASPEED_SOC_ETH2_BASE        0x1E680000
+
+static const hwaddr aspeed_soc_ast2400_memmap[] = {
+    [ASPEED_IOMEM]  = 0x1E600000,
+    [ASPEED_FMC]    = 0x1E620000,
+    [ASPEED_SPI1]   = 0x1E630000,
+    [ASPEED_VIC]    = 0x1E6C0000,
+    [ASPEED_SDMC]   = 0x1E6E0000,
+    [ASPEED_SCU]    = 0x1E6E2000,
+    [ASPEED_ADC]    = 0x1E6E9000,
+    [ASPEED_SRAM]   = 0x1E720000,
+    [ASPEED_GPIO]   = 0x1E780000,
+    [ASPEED_RTC]    = 0x1E781000,
+    [ASPEED_TIMER1] = 0x1E782000,
+    [ASPEED_WDT]    = 0x1E785000,
+    [ASPEED_PWM]    = 0x1E786000,
+    [ASPEED_LPC]    = 0x1E789000,
+    [ASPEED_IBT]    = 0x1E789140,
+    [ASPEED_I2C]    = 0x1E78A000,
+    [ASPEED_ETH1]   = 0x1E660000,
+    [ASPEED_ETH2]   = 0x1E680000,
+    [ASPEED_UART1]  = 0x1E783000,
+    [ASPEED_UART5]  = 0x1E784000,
+    [ASPEED_VUART]  = 0x1E787000,
+    [ASPEED_SDRAM]  = 0x40000000,
+};
+
+static const hwaddr aspeed_soc_ast2500_memmap[] = {
+    [ASPEED_IOMEM]  = 0x1E600000,
+    [ASPEED_FMC]    = 0x1E620000,
+    [ASPEED_SPI1]   = 0x1E630000,
+    [ASPEED_SPI2]   = 0x1E631000,
+    [ASPEED_VIC]    = 0x1E6C0000,
+    [ASPEED_SDMC]   = 0x1E6E0000,
+    [ASPEED_SCU]    = 0x1E6E2000,
+    [ASPEED_ADC]    = 0x1E6E9000,
+    [ASPEED_SRAM]   = 0x1E720000,
+    [ASPEED_GPIO]   = 0x1E780000,
+    [ASPEED_RTC]    = 0x1E781000,
+    [ASPEED_TIMER1] = 0x1E782000,
+    [ASPEED_WDT]    = 0x1E785000,
+    [ASPEED_PWM]    = 0x1E786000,
+    [ASPEED_LPC]    = 0x1E789000,
+    [ASPEED_IBT]    = 0x1E789140,
+    [ASPEED_I2C]    = 0x1E78A000,
+    [ASPEED_ETH1]   = 0x1E660000,
+    [ASPEED_ETH2]   = 0x1E680000,
+    [ASPEED_UART1]  = 0x1E783000,
+    [ASPEED_UART5]  = 0x1E784000,
+    [ASPEED_VUART]  = 0x1E787000,
+    [ASPEED_SDRAM]  = 0x80000000,
+};
 
 static const int aspeed_soc_ast2400_irqmap[] = {
     [ASPEED_UART1]  = 9,
@@ -XXX,XX +XXX,XX @@ static const int aspeed_soc_ast2400_irqmap[] = {
     [ASPEED_ETH2]   = 3,
 };
 
-#define AST2400_SDRAM_BASE       0x40000000
-#define AST2500_SDRAM_BASE       0x80000000
-
-/* AST2500 uses the same IRQs as the AST2400 */
 #define aspeed_soc_ast2500_irqmap aspeed_soc_ast2400_irqmap
 
-static const hwaddr aspeed_soc_ast2400_spi_bases[] = { ASPEED_SOC_SPI_BASE };
 static const char *aspeed_soc_ast2400_typenames[] = { "aspeed.smc.spi" };
-
-static const hwaddr aspeed_soc_ast2500_spi_bases[] = { ASPEED_SOC_SPI_BASE,
-                                                       ASPEED_SOC_SPI2_BASE};
 static const char *aspeed_soc_ast2500_typenames[] = {
     "aspeed.smc.ast2500-spi1", "aspeed.smc.ast2500-spi2" };
 
@@ -XXX,XX +XXX,XX @@ static const AspeedSoCInfo aspeed_socs[] = {
         .name         = "ast2400-a0",
         .cpu_type     = ARM_CPU_TYPE_NAME("arm926"),
         .silicon_rev  = AST2400_A0_SILICON_REV,
-        .sdram_base   = AST2400_SDRAM_BASE,
         .sram_size    = 0x8000,
         .spis_num     = 1,
-        .spi_bases    = aspeed_soc_ast2400_spi_bases,
         .fmc_typename = "aspeed.smc.fmc",
         .spi_typename = aspeed_soc_ast2400_typenames,
         .wdts_num     = 2,
         .irqmap       = aspeed_soc_ast2400_irqmap,
+        .memmap       = aspeed_soc_ast2400_memmap,
     }, {
         .name         = "ast2400-a1",
         .cpu_type     = ARM_CPU_TYPE_NAME("arm926"),
         .silicon_rev  = AST2400_A1_SILICON_REV,
-        .sdram_base   = AST2400_SDRAM_BASE,
         .sram_size    = 0x8000,
         .spis_num     = 1,
-        .spi_bases    = aspeed_soc_ast2400_spi_bases,
         .fmc_typename = "aspeed.smc.fmc",
         .spi_typename = aspeed_soc_ast2400_typenames,
         .wdts_num     = 2,
         .irqmap       = aspeed_soc_ast2400_irqmap,
+        .memmap       = aspeed_soc_ast2400_memmap,
     }, {
         .name         = "ast2400",
         .cpu_type     = ARM_CPU_TYPE_NAME("arm926"),
         .silicon_rev  = AST2400_A0_SILICON_REV,
-        .sdram_base   = AST2400_SDRAM_BASE,
         .sram_size    = 0x8000,
         .spis_num     = 1,
-        .spi_bases    = aspeed_soc_ast2400_spi_bases,
         .fmc_typename = "aspeed.smc.fmc",
         .spi_typename = aspeed_soc_ast2400_typenames,
         .wdts_num     = 2,
         .irqmap       = aspeed_soc_ast2400_irqmap,
+        .memmap       = aspeed_soc_ast2400_memmap,
     }, {
         .name         = "ast2500-a1",
         .cpu_type     = ARM_CPU_TYPE_NAME("arm1176"),
         .silicon_rev  = AST2500_A1_SILICON_REV,
-        .sdram_base   = AST2500_SDRAM_BASE,
         .sram_size    = 0x9000,
         .spis_num     = 2,
-        .spi_bases    = aspeed_soc_ast2500_spi_bases,
         .fmc_typename = "aspeed.smc.ast2500-fmc",
         .spi_typename = aspeed_soc_ast2500_typenames,
         .wdts_num     = 3,
         .irqmap       = aspeed_soc_ast2500_irqmap,
+        .memmap       = aspeed_soc_ast2500_memmap,
     },
 };
 
@@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp)
     Error *err = NULL, *local_err = NULL;
 
     /* IO space */
-    create_unimplemented_device("aspeed_soc.io",
-                                ASPEED_SOC_IOMEM_BASE, ASPEED_SOC_IOMEM_SIZE);
+    create_unimplemented_device("aspeed_soc.io", sc->info->memmap[ASPEED_IOMEM],
+                                ASPEED_SOC_IOMEM_SIZE);
 
     /* CPU */
     object_property_set_bool(OBJECT(&s->cpu), true, "realized", &err);
@@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp)
         error_propagate(errp, err);
         return;
     }
-    memory_region_add_subregion(get_system_memory(), ASPEED_SOC_SRAM_BASE,
-                                &s->sram);
+    memory_region_add_subregion(get_system_memory(),
+                                sc->info->memmap[ASPEED_SRAM], &s->sram);
 
     /* SCU */
     object_property_set_bool(OBJECT(&s->scu), true, "realized", &err);
@@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp)
         error_propagate(errp, err);
         return;
     }
-    sysbus_mmio_map(SYS_BUS_DEVICE(&s->scu), 0, ASPEED_SOC_SCU_BASE);
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->scu), 0, sc->info->memmap[ASPEED_SCU]);
 
     /* VIC */
     object_property_set_bool(OBJECT(&s->vic), true, "realized", &err);
@@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp)
         error_propagate(errp, err);
         return;
     }
-    sysbus_mmio_map(SYS_BUS_DEVICE(&s->vic), 0, ASPEED_SOC_VIC_BASE);
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->vic), 0, sc->info->memmap[ASPEED_VIC]);
     sysbus_connect_irq(SYS_BUS_DEVICE(&s->vic), 0,
                        qdev_get_gpio_in(DEVICE(&s->cpu), ARM_CPU_IRQ));
     sysbus_connect_irq(SYS_BUS_DEVICE(&s->vic), 1,
@@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp)
         error_propagate(errp, err);
         return;
     }
-    sysbus_mmio_map(SYS_BUS_DEVICE(&s->timerctrl), 0, ASPEED_SOC_TIMER_BASE);
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->timerctrl), 0,
+                    sc->info->memmap[ASPEED_TIMER1]);
     for (i = 0; i < ASPEED_TIMER_NR_TIMERS; i++) {
         qemu_irq irq = aspeed_soc_get_irq(s, ASPEED_TIMER1 + i);
         sysbus_connect_irq(SYS_BUS_DEVICE(&s->timerctrl), i, irq);
@@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp)
     /* UART - attach an 8250 to the IO space as our UART5 */
     if (serial_hd(0)) {
         qemu_irq uart5 = aspeed_soc_get_irq(s, ASPEED_UART5);
-        serial_mm_init(get_system_memory(),
-                       ASPEED_SOC_IOMEM_BASE + ASPEED_SOC_UART_5_BASE, 2,
+        serial_mm_init(get_system_memory(), sc->info->memmap[ASPEED_UART5], 2,
                        uart5, 38400, serial_hd(0), DEVICE_LITTLE_ENDIAN);
     }
 
@@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp)
         error_propagate(errp, err);
         return;
     }
-    sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c), 0, ASPEED_SOC_I2C_BASE);
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c), 0, sc->info->memmap[ASPEED_I2C]);
     sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c), 0,
                        aspeed_soc_get_irq(s, ASPEED_I2C));
 
@@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp)
         error_propagate(errp, err);
         return;
     }
-    sysbus_mmio_map(SYS_BUS_DEVICE(&s->fmc), 0, ASPEED_SOC_FMC_BASE);
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->fmc), 0, sc->info->memmap[ASPEED_FMC]);
     sysbus_mmio_map(SYS_BUS_DEVICE(&s->fmc), 1,
                     s->fmc.ctrl->flash_window_base);
     sysbus_connect_irq(SYS_BUS_DEVICE(&s->fmc), 0,
@@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp)
             error_propagate(errp, err);
             return;
         }
-        sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0, sc->info->spi_bases[i]);
+        sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0,
+                        sc->info->memmap[ASPEED_SPI1 + i]);
         sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 1,
                         s->spi[i].ctrl->flash_window_base);
     }
@@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp)
         error_propagate(errp, err);
         return;
     }
-    sysbus_mmio_map(SYS_BUS_DEVICE(&s->sdmc), 0, ASPEED_SOC_SDMC_BASE);
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->sdmc), 0, sc->info->memmap[ASPEED_SDMC]);
 
     /* Watch dog */
     for (i = 0; i < sc->info->wdts_num; i++) {
@@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp)
             return;
         }
         sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[i]), 0,
-                        ASPEED_SOC_WDT_BASE + i * 0x20);
+                        sc->info->memmap[ASPEED_WDT] + i * 0x20);
     }
 
     /* Net */
@@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp)
         error_propagate(errp, err);
         return;
     }
-    sysbus_mmio_map(SYS_BUS_DEVICE(&s->ftgmac100), 0, ASPEED_SOC_ETH1_BASE);
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->ftgmac100), 0,
+                    sc->info->memmap[ASPEED_ETH1]);
     sysbus_connect_irq(SYS_BUS_DEVICE(&s->ftgmac100), 0,
                        aspeed_soc_get_irq(s, ASPEED_ETH1));
 }
-- 
2.20.1

From: Joel Stanley <joel@jms.id.au>

The RTC is modeled to provide time and date functionality. It is
initialised at zero to match the hardware.

There is no modelling of the alarm functionality, which includes the IRQ
line. As there is no guest code to exercise this function that is
acceptable for now.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190618165311.27066-4-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/timer/Makefile.objs        |   2 +-
 include/hw/timer/aspeed_rtc.h |  31 ++++++
 hw/timer/aspeed_rtc.c         | 180 ++++++++++++++++++++++++++++++++++
 hw/timer/trace-events         |   4 +
 4 files changed, 216 insertions(+), 1 deletion(-)
 create mode 100644 include/hw/timer/aspeed_rtc.h
 create mode 100644 hw/timer/aspeed_rtc.c

diff --git a/hw/timer/Makefile.objs b/hw/timer/Makefile.objs
index XXXXXXX..XXXXXXX 100644
--- a/hw/timer/Makefile.objs
+++ b/hw/timer/Makefile.objs
@@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_MC146818RTC) += mc146818rtc.o
 obj-$(CONFIG_ALLWINNER_A10_PIT) += allwinner-a10-pit.o
 
 common-obj-$(CONFIG_STM32F2XX_TIMER) += stm32f2xx_timer.o
-common-obj-$(CONFIG_ASPEED_SOC) += aspeed_timer.o
+common-obj-$(CONFIG_ASPEED_SOC) += aspeed_timer.o aspeed_rtc.o
 
 common-obj-$(CONFIG_SUN4V_RTC) += sun4v-rtc.o
 common-obj-$(CONFIG_CMSDK_APB_TIMER) += cmsdk-apb-timer.o
diff --git a/include/hw/timer/aspeed_rtc.h b/include/hw/timer/aspeed_rtc.h
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/include/hw/timer/aspeed_rtc.h
@@ -XXX,XX +XXX,XX @@
+/*
+ * ASPEED Real Time Clock
+ * Joel Stanley <joel@jms.id.au>
+ *
+ * Copyright 2019 IBM Corp
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+#ifndef ASPEED_RTC_H
+#define ASPEED_RTC_H
+
+#include <stdint.h>
+
+#include "hw/hw.h"
+#include "hw/irq.h"
+#include "hw/sysbus.h"
+
+typedef struct AspeedRtcState {
+    SysBusDevice parent_obj;
+
+    MemoryRegion iomem;
+    qemu_irq irq;
+
+    uint32_t reg[0x18];
+    int offset;
+
+} AspeedRtcState;
+
+#define TYPE_ASPEED_RTC "aspeed.rtc"
+#define ASPEED_RTC(obj) OBJECT_CHECK(AspeedRtcState, (obj), TYPE_ASPEED_RTC)
+
+#endif /* ASPEED_RTC_H */
diff --git a/hw/timer/aspeed_rtc.c b/hw/timer/aspeed_rtc.c
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/hw/timer/aspeed_rtc.c
@@ -XXX,XX +XXX,XX @@
+/*
+ * ASPEED Real Time Clock
+ * Joel Stanley <joel@jms.id.au>
+ *
+ * Copyright 2019 IBM Corp
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "qemu-common.h"
+#include "hw/timer/aspeed_rtc.h"
+#include "qemu/log.h"
+#include "qemu/timer.h"
+
+#include "trace.h"
+
+#define COUNTER1        (0x00 / 4)
+#define COUNTER2        (0x04 / 4)
+#define ALARM           (0x08 / 4)
+#define CONTROL         (0x10 / 4)
+#define ALARM_STATUS    (0x14 / 4)
+
+#define RTC_UNLOCKED    BIT(1)
+#define RTC_ENABLED     BIT(0)
+
+static void aspeed_rtc_calc_offset(AspeedRtcState *rtc)
+{
+    struct tm tm;
+    uint32_t year, cent;
+    uint32_t reg1 = rtc->reg[COUNTER1];
+    uint32_t reg2 = rtc->reg[COUNTER2];
+
+    tm.tm_mday = (reg1 >> 24) & 0x1f;
+    tm.tm_hour = (reg1 >> 16) & 0x1f;
+    tm.tm_min = (reg1 >> 8) & 0x3f;
+    tm.tm_sec = (reg1 >> 0) & 0x3f;
+
+    cent = (reg2 >> 16) & 0x1f;
+    year = (reg2 >> 8) & 0x7f;
+    tm.tm_mon = ((reg2 >>  0) & 0x0f) - 1;
+    tm.tm_year = year + (cent * 100) - 1900;
+
+    rtc->offset = qemu_timedate_diff(&tm);
+}
+
+static uint32_t aspeed_rtc_get_counter(AspeedRtcState *rtc, int r)
+{
+    uint32_t year, cent;
+    struct tm now;
+
+    qemu_get_timedate(&now, rtc->offset);
+
+    switch (r) {
+    case COUNTER1:
+        return (now.tm_mday << 24) | (now.tm_hour << 16) |
+            (now.tm_min << 8) | now.tm_sec;
+    case COUNTER2:
+        cent = (now.tm_year + 1900) / 100;
+        year = now.tm_year % 100;
+        return ((cent & 0x1f) << 16) | ((year & 0x7f) << 8) |
+            ((now.tm_mon + 1) & 0xf);
+    default:
+        g_assert_not_reached();
+    }
+}
+
+static uint64_t aspeed_rtc_read(void *opaque, hwaddr addr,
+                                unsigned size)
+{
+    AspeedRtcState *rtc = opaque;
+    uint64_t val;
+    uint32_t r = addr >> 2;
+
+    switch (r) {
+    case COUNTER1:
+    case COUNTER2:
+        if (rtc->reg[CONTROL] & RTC_ENABLED) {
+            rtc->reg[r] = aspeed_rtc_get_counter(rtc, r);
+        }
+        /* fall through */
+    case CONTROL:
+        val = rtc->reg[r];
+        break;
+    case ALARM:
+    case ALARM_STATUS:
+    default:
+        qemu_log_mask(LOG_UNIMP, "%s: 0x%" HWADDR_PRIx "\n", __func__, addr);
+        return 0;
+    }
+
+    trace_aspeed_rtc_read(addr, val);
+
+    return val;
+}
+
+static void aspeed_rtc_write(void *opaque, hwaddr addr,
+                             uint64_t val, unsigned size)
+{
+    AspeedRtcState *rtc = opaque;
+    uint32_t r = addr >> 2;
+
+    switch (r) {
+    case COUNTER1:
+    case COUNTER2:
+        if (!(rtc->reg[CONTROL] & RTC_UNLOCKED)) {
+            break;
+        }
+        /* fall through */
+    case CONTROL:
+        rtc->reg[r] = val;
+        aspeed_rtc_calc_offset(rtc);
+        break;
+    case ALARM:
+    case ALARM_STATUS:
+    default:
+        qemu_log_mask(LOG_UNIMP, "%s: 0x%" HWADDR_PRIx "\n", __func__, addr);
+        break;
+    }
+    trace_aspeed_rtc_write(addr, val);
+}
+
+static void aspeed_rtc_reset(DeviceState *d)
+{
+    AspeedRtcState *rtc = ASPEED_RTC(d);
+
+    rtc->offset = 0;
+    memset(rtc->reg, 0, sizeof(rtc->reg));
+}
+
+static const MemoryRegionOps aspeed_rtc_ops = {
+    .read = aspeed_rtc_read,
+    .write = aspeed_rtc_write,
+    .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static const VMStateDescription vmstate_aspeed_rtc = {
+    .name = TYPE_ASPEED_RTC,
+    .version_id = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT32_ARRAY(reg, AspeedRtcState, 0x18),
+        VMSTATE_INT32(offset, AspeedRtcState),
+        VMSTATE_INT32(offset, AspeedRtcState),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+static void aspeed_rtc_realize(DeviceState *dev, Error **errp)
+{
+    SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
+    AspeedRtcState *s = ASPEED_RTC(dev);
+
+    sysbus_init_irq(sbd, &s->irq);
+
+    memory_region_init_io(&s->iomem, OBJECT(s), &aspeed_rtc_ops, s,
+                          "aspeed-rtc", 0x18ULL);
+    sysbus_init_mmio(sbd, &s->iomem);
+}
+
+static void aspeed_rtc_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->realize = aspeed_rtc_realize;
+    dc->vmsd = &vmstate_aspeed_rtc;
+    dc->reset = aspeed_rtc_reset;
+}
+
+static const TypeInfo aspeed_rtc_info = {
+    .name          = TYPE_ASPEED_RTC,
+    .parent        = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(AspeedRtcState),
+    .class_init    = aspeed_rtc_class_init,
+};
+
+static void aspeed_rtc_register_types(void)
+{
+    type_register_static(&aspeed_rtc_info);
+}
+
+type_init(aspeed_rtc_register_types)
diff --git a/hw/timer/trace-events b/hw/timer/trace-events
index XXXXXXX..XXXXXXX 100644
--- a/hw/timer/trace-events
+++ b/hw/timer/trace-events
@@ -XXX,XX +XXX,XX @@ cmsdk_apb_dualtimer_read(uint64_t offset, uint64_t data, unsigned size) "CMSDK A
 cmsdk_apb_dualtimer_write(uint64_t offset, uint64_t data, unsigned size) "CMSDK APB dualtimer write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"
 cmsdk_apb_dualtimer_reset(void) "CMSDK APB dualtimer: reset"
 
+# hw/timer/aspeed-rtc.c
+aspeed_rtc_read(uint64_t addr, uint64_t value) "addr 0x%02" PRIx64 " value 0x%08" PRIx64
+aspeed_rtc_write(uint64_t addr, uint64_t value) "addr 0x%02" PRIx64 " value 0x%08" PRIx64
+
 # sun4v-rtc.c
 sun4v_rtc_read(uint64_t addr, uint64_t value) "read: addr 0x%" PRIx64 " value 0x%" PRIx64
 sun4v_rtc_write(uint64_t addr, uint64_t value) "write: addr 0x%" PRIx64 " value 0x%" PRIx64
-- 
2.20.1

From: Joel Stanley <joel@jms.id.au>

All systems have an RTC.

The IRQ is hooked up but the model does not use it at this stage. There
is no guest code that uses it, so this limitation is acceptable.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190618165311.27066-5-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/arm/aspeed_soc.h |  2 ++
 hw/arm/aspeed_soc.c         | 13 +++++++++++++
 2 files changed, 15 insertions(+)

diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/aspeed_soc.h
+++ b/include/hw/arm/aspeed_soc.h
@@ -XXX,XX +XXX,XX @@
 #include "hw/misc/aspeed_scu.h"
 #include "hw/misc/aspeed_sdmc.h"
 #include "hw/timer/aspeed_timer.h"
+#include "hw/timer/aspeed_rtc.h"
 #include "hw/i2c/aspeed_i2c.h"
 #include "hw/ssi/aspeed_smc.h"
 #include "hw/watchdog/wdt_aspeed.h"
@@ -XXX,XX +XXX,XX @@ typedef struct AspeedSoCState {
     ARMCPU cpu;
     MemoryRegion sram;
     AspeedVICState vic;
+    AspeedRtcState rtc;
     AspeedTimerCtrlState timerctrl;
     AspeedI2CState i2c;
     AspeedSCUState scu;
diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/aspeed_soc.c
+++ b/hw/arm/aspeed_soc.c
@@ -XXX,XX +XXX,XX @@ static void aspeed_soc_init(Object *obj)
     sysbus_init_child_obj(obj, "vic", OBJECT(&s->vic), sizeof(s->vic),
                           TYPE_ASPEED_VIC);
 
+    sysbus_init_child_obj(obj, "rtc", OBJECT(&s->rtc), sizeof(s->rtc),
+                          TYPE_ASPEED_RTC);
+
     sysbus_init_child_obj(obj, "timerctrl", OBJECT(&s->timerctrl),
                           sizeof(s->timerctrl), TYPE_ASPEED_TIMER);
     object_property_add_const_link(OBJECT(&s->timerctrl), "scu",
@@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp)
     sysbus_connect_irq(SYS_BUS_DEVICE(&s->vic), 1,
                        qdev_get_gpio_in(DEVICE(&s->cpu), ARM_CPU_FIQ));
 
+    /* RTC */
+    object_property_set_bool(OBJECT(&s->rtc), true, "realized", &err);
+    if (err) {
+        error_propagate(errp, err);
+        return;
+    }
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->rtc), 0, sc->info->memmap[ASPEED_RTC]);
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->rtc), 0,
+                       aspeed_soc_get_irq(s, ASPEED_RTC));
+
     /* Timer */
     object_property_set_bool(OBJECT(&s->timerctrl), true, "realized", &err);
     if (err) {
-- 
2.20.1

From: Cédric Le Goater <clg@kaod.org>

The current models of the Aspeed SoCs only have one CPU but future
ones will support SMP. Introduce a new num_cpus field at the SoC class
level to define the number of available CPUs per SoC and also
introduce a 'num-cpus' property to activate the CPUs configured for
the machine.

The max_cpus limit of the machine should depend on the SoC definition
but, unfortunately, these values are not available when the machine
class is initialized. This is the reason why we add a check on
num_cpus in the AspeedSoC realize handler.

SMP support will be activated when models for such SoCs are implemented.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 20190618165311.27066-6-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/arm/aspeed_soc.h |  5 ++++-
 hw/arm/aspeed.c             |  7 +++++--
 hw/arm/aspeed_soc.c         | 33 +++++++++++++++++++++++++++------
 3 files changed, 36 insertions(+), 9 deletions(-)

diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/aspeed_soc.h
+++ b/include/hw/arm/aspeed_soc.h
@@ -XXX,XX +XXX,XX @@
 
 #define ASPEED_SPIS_NUM  2
 #define ASPEED_WDTS_NUM  3
+#define ASPEED_CPUS_NUM  2
 
 typedef struct AspeedSoCState {
     /*< private >*/
     DeviceState parent;
 
     /*< public >*/
-    ARMCPU cpu;
+    ARMCPU cpu[ASPEED_CPUS_NUM];
+    uint32_t num_cpus;
     MemoryRegion sram;
     AspeedVICState vic;
     AspeedRtcState rtc;
@@ -XXX,XX +XXX,XX @@ typedef struct AspeedSoCInfo {
     int wdts_num;
     const int *irqmap;
     const hwaddr *memmap;
+    uint32_t num_cpus;
 } AspeedSoCInfo;
 
 typedef struct AspeedSoCClass {
diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/aspeed.c
+++ b/hw/arm/aspeed.c
@@ -XXX,XX +XXX,XX @@
 #include "hw/misc/tmp105.h"
 #include "qemu/log.h"
 #include "sysemu/block-backend.h"
+#include "sysemu/sysemu.h"
 #include "hw/loader.h"
 #include "qemu/error-report.h"
 #include "qemu/units.h"
 
 static struct arm_boot_info aspeed_board_binfo = {
     .board_id = -1, /* device-tree-only board */
-    .nb_cpus = 1,
 };
 
 struct AspeedBoardState {
@@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine,
                             &error_abort);
     object_property_set_int(OBJECT(&bmc->soc), cfg->num_cs, "num-cs",
                             &error_abort);
+    object_property_set_int(OBJECT(&bmc->soc), smp_cpus, "num-cpus",
+                            &error_abort);
     if (machine->kernel_filename) {
         /*
          * When booting with a -kernel command line there is no u-boot
@@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine,
     aspeed_board_binfo.kernel_cmdline = machine->kernel_cmdline;
     aspeed_board_binfo.ram_size = ram_size;
     aspeed_board_binfo.loader_start = sc->info->memmap[ASPEED_SDRAM];
+    aspeed_board_binfo.nb_cpus = bmc->soc.num_cpus;
 
     if (cfg->i2c_init) {
         cfg->i2c_init(bmc);
@@ -XXX,XX +XXX,XX @@ static void aspeed_machine_class_init(ObjectClass *oc, void *data)
 
     mc->desc = board->desc;
     mc->init = aspeed_machine_init;
-    mc->max_cpus = 1;
+    mc->max_cpus = ASPEED_CPUS_NUM;
     mc->no_sdcard = 1;
     mc->no_floppy = 1;
     mc->no_cdrom = 1;
diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/aspeed_soc.c
+++ b/hw/arm/aspeed_soc.c
@@ -XXX,XX +XXX,XX @@
 #include "hw/char/serial.h"
 #include "qemu/log.h"
 #include "qemu/module.h"
+#include "qemu/error-report.h"
 #include "hw/i2c/aspeed_i2c.h"
 #include "net/net.h"
 
@@ -XXX,XX +XXX,XX @@ static const AspeedSoCInfo aspeed_socs[] = {
         .wdts_num     = 2,
         .irqmap       = aspeed_soc_ast2400_irqmap,
         .memmap       = aspeed_soc_ast2400_memmap,
+        .num_cpus     = 1,
     }, {
         .name         = "ast2400-a1",
         .cpu_type     = ARM_CPU_TYPE_NAME("arm926"),
@@ -XXX,XX +XXX,XX @@ static const AspeedSoCInfo aspeed_socs[] = {
         .wdts_num     = 2,
         .irqmap       = aspeed_soc_ast2400_irqmap,
         .memmap       = aspeed_soc_ast2400_memmap,
+        .num_cpus     = 1,
     }, {
         .name         = "ast2400",
         .cpu_type     = ARM_CPU_TYPE_NAME("arm926"),
@@ -XXX,XX +XXX,XX @@ static const AspeedSoCInfo aspeed_socs[] = {
         .wdts_num     = 2,
         .irqmap       = aspeed_soc_ast2400_irqmap,
         .memmap       = aspeed_soc_ast2400_memmap,
+        .num_cpus     = 1,
     }, {
         .name         = "ast2500-a1",
         .cpu_type     = ARM_CPU_TYPE_NAME("arm1176"),
@@ -XXX,XX +XXX,XX @@ static const AspeedSoCInfo aspeed_socs[] = {
         .wdts_num     = 3,
         .irqmap       = aspeed_soc_ast2500_irqmap,
         .memmap       = aspeed_soc_ast2500_memmap,
+        .num_cpus     = 1,
     },
 };
 
@@ -XXX,XX +XXX,XX @@ static void aspeed_soc_init(Object *obj)
     AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s);
     int i;
 
-    object_initialize_child(obj, "cpu", OBJECT(&s->cpu), sizeof(s->cpu),
-                            sc->info->cpu_type, &error_abort, NULL);
+    for (i = 0; i < sc->info->num_cpus; i++) {
+        object_initialize_child(obj, "cpu[*]", OBJECT(&s->cpu[i]),
+                                sizeof(s->cpu[i]), sc->info->cpu_type,
+                                &error_abort, NULL);
+    }
 
     sysbus_init_child_obj(obj, "scu", OBJECT(&s->scu), sizeof(s->scu),
                           TYPE_ASPEED_SCU);
@@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp)
     create_unimplemented_device("aspeed_soc.io", sc->info->memmap[ASPEED_IOMEM],
                                 ASPEED_SOC_IOMEM_SIZE);
 
+    if (s->num_cpus > sc->info->num_cpus) {
+        warn_report("%s: invalid number of CPUs %d, using default %d",
+                    sc->info->name, s->num_cpus, sc->info->num_cpus);
+        s->num_cpus = sc->info->num_cpus;
+    }
+
     /* CPU */
-    object_property_set_bool(OBJECT(&s->cpu), true, "realized", &err);
-    if (err) {
-        error_propagate(errp, err);
-        return;
+    for (i = 0; i < s->num_cpus; i++) {
+        object_property_set_bool(OBJECT(&s->cpu[i]), true, "realized", &err);
+        if (err) {
+            error_propagate(errp, err);
+            return;
+        }
     }
 
     /* SRAM */
@@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp)
     sysbus_connect_irq(SYS_BUS_DEVICE(&s->ftgmac100), 0,
                        aspeed_soc_get_irq(s, ASPEED_ETH1));
 }
+static Property aspeed_soc_properties[] = {
+    DEFINE_PROP_UINT32("num-cpus", AspeedSoCState, num_cpus, 0),
+    DEFINE_PROP_END_OF_LIST(),
+};
 
 static void aspeed_soc_class_init(ObjectClass *oc, void *data)
 {
@@ -XXX,XX +XXX,XX @@ static void aspeed_soc_class_init(ObjectClass *oc, void *data)
     dc->realize = aspeed_soc_realize;
     /* Reason: Uses serial_hds and nd_table in realize() directly */
     dc->user_creatable = false;
+    dc->props = aspeed_soc_properties;
 }
 
 static const TypeInfo aspeed_soc_type_info = {
-- 
2.20.1

From: Cédric Le Goater <clg@kaod.org>

The Aspeed SoCs have two MACs. Extend the Aspeed model to support a
second NIC.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 20190618165311.27066-7-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/arm/aspeed_soc.h |  3 ++-
 hw/arm/aspeed_soc.c         | 33 +++++++++++++++++++--------------
 2 files changed, 21 insertions(+), 15 deletions(-)

diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/aspeed_soc.h
+++ b/include/hw/arm/aspeed_soc.h
@@ -XXX,XX +XXX,XX @@
 #define ASPEED_SPIS_NUM  2
 #define ASPEED_WDTS_NUM  3
 #define ASPEED_CPUS_NUM  2
+#define ASPEED_MACS_NUM  2
 
 typedef struct AspeedSoCState {
     /*< private >*/
@@ -XXX,XX +XXX,XX @@ typedef struct AspeedSoCState {
     AspeedSMCState spi[ASPEED_SPIS_NUM];
     AspeedSDMCState sdmc;
     AspeedWDTState wdt[ASPEED_WDTS_NUM];
-    FTGMAC100State ftgmac100;
+    FTGMAC100State ftgmac100[ASPEED_MACS_NUM];
 } AspeedSoCState;
 
 #define TYPE_ASPEED_SOC "aspeed-soc"
diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/aspeed_soc.c
+++ b/hw/arm/aspeed_soc.c
@@ -XXX,XX +XXX,XX @@ static void aspeed_soc_init(Object *obj)
                                     sc->info->silicon_rev);
     }
 
-    sysbus_init_child_obj(obj, "ftgmac100", OBJECT(&s->ftgmac100),
-                          sizeof(s->ftgmac100), TYPE_FTGMAC100);
+    for (i = 0; i < ASPEED_MACS_NUM; i++) {
+        sysbus_init_child_obj(obj, "ftgmac100[*]", OBJECT(&s->ftgmac100[i]),
+                              sizeof(s->ftgmac100[i]), TYPE_FTGMAC100);
+    }
 }
 
 static void aspeed_soc_realize(DeviceState *dev, Error **errp)
@@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp)
     }
 
     /* Net */
-    qdev_set_nic_properties(DEVICE(&s->ftgmac100), &nd_table[0]);
-    object_property_set_bool(OBJECT(&s->ftgmac100), true, "aspeed", &err);
-    object_property_set_bool(OBJECT(&s->ftgmac100), true, "realized",
-                             &local_err);
-    error_propagate(&err, local_err);
-    if (err) {
-        error_propagate(errp, err);
-        return;
+    for (i = 0; i < nb_nics; i++) {
+        qdev_set_nic_properties(DEVICE(&s->ftgmac100[i]), &nd_table[i]);
+        object_property_set_bool(OBJECT(&s->ftgmac100[i]), true, "aspeed",
+                                 &err);
+        object_property_set_bool(OBJECT(&s->ftgmac100[i]), true, "realized",
+                                 &local_err);
+        error_propagate(&err, local_err);
+        if (err) {
+            error_propagate(errp, err);
+           return;
+        }
+        sysbus_mmio_map(SYS_BUS_DEVICE(&s->ftgmac100[i]), 0,
+                        sc->info->memmap[ASPEED_ETH1 + i]);
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->ftgmac100[i]), 0,
+                           aspeed_soc_get_irq(s, ASPEED_ETH1 + i));
     }
-    sysbus_mmio_map(SYS_BUS_DEVICE(&s->ftgmac100), 0,
-                    sc->info->memmap[ASPEED_ETH1]);
-    sysbus_connect_irq(SYS_BUS_DEVICE(&s->ftgmac100), 0,
-                       aspeed_soc_get_irq(s, ASPEED_ETH1));
 }
 static Property aspeed_soc_properties[] = {
     DEFINE_PROP_UINT32("num-cpus", AspeedSoCState, num_cpus, 0),
-- 
2.20.1

From: Joel Stanley <joel@jms.id.au>

The Linux kernel driver was updated in commit 4451d3f59f2a
("clocksource/drivers/fttmr010: Fix set_next_event handler) to fix an
issue observed on hardware:

> RELOAD register is loaded into COUNT register when the aspeed timer
 > is enabled, which means the next event may be delayed because timer
 > interrupt won't be generated until <0xFFFFFFFF - current_count +
 > cycles>.

When running under Qemu, the system appeared "laggy". The guest is now
scheduling timer events too regularly, starving the host of CPU time.

This patch modifies the timer model to attempt to schedule the timer
expiry as the guest requests, but if we have missed the deadline we
re interrupt and try again, which allows the guest to catch up.

Provides expected behaviour with old and new guest code.

Fixes: c04bd47db6b9 ("hw/timer: Add ASPEED timer device model")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20190618165311.27066-8-clg@kaod.org
[clg: - merged a fix from Andrew Jeffery <andrew@aj.id.au>
        "Fire interrupt on failure to meet deadline"
        https://lists.ozlabs.org/pipermail/openbmc/2019-January/014641.html
      - adapted commit log
      - checkpatch fixes ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/timer/aspeed_timer.c | 57 ++++++++++++++++++++++-------------------
 1 file changed, 30 insertions(+), 27 deletions(-)

diff --git a/hw/timer/aspeed_timer.c b/hw/timer/aspeed_timer.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/timer/aspeed_timer.c
+++ b/hw/timer/aspeed_timer.c
@@ -XXX,XX +XXX,XX @@ static inline uint64_t calculate_time(struct AspeedTimer *t, uint32_t ticks)
 
 static uint64_t calculate_next(struct AspeedTimer *t)
 {
-    uint64_t next = 0;
-    uint32_t rate = calculate_rate(t);
+    uint64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+    uint64_t next;
 
-    while (!next) {
-        /* We don't know the relationship between the values in the match
-         * registers, so sort using MAX/MIN/zero. We sort in that order as the
-         * timer counts down to zero. */
-        uint64_t seq[] = {
-            calculate_time(t, MAX(t->match[0], t->match[1])),
-            calculate_time(t, MIN(t->match[0], t->match[1])),
-            calculate_time(t, 0),
-        };
-        uint64_t reload_ns;
-        uint64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+    /*
+     * We don't know the relationship between the values in the match
+     * registers, so sort using MAX/MIN/zero. We sort in that order as
+     * the timer counts down to zero.
+     */
 
-        if (now < seq[0]) {
-            next = seq[0];
-        } else if (now < seq[1]) {
-            next = seq[1];
-        } else if (now < seq[2]) {
-            next = seq[2];
-        } else if (t->reload) {
-            reload_ns = muldiv64(t->reload, NANOSECONDS_PER_SECOND, rate);
-            t->start = now - ((now - t->start) % reload_ns);
-        } else {
-            /* no reload value, return 0 */
-            break;
-        }
+    next = calculate_time(t, MAX(t->match[0], t->match[1]));
+    if (now < next) {
+        return next;
     }
 
-    return next;
+    next = calculate_time(t, MIN(t->match[0], t->match[1]));
+    if (now < next) {
+        return next;
+    }
+
+    next = calculate_time(t, 0);
+    if (now < next) {
+        return next;
+    }
+
+    /* We've missed all deadlines, fire interrupt and try again */
+    timer_del(&t->timer);
+
+    if (timer_overflow_interrupt(t)) {
+        t->level = !t->level;
+        qemu_set_irq(t->irq, t->level);
+    }
+
+    t->start = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+    return calculate_time(t, MAX(MAX(t->match[0], t->match[1]), 0));
 }
 
 static void aspeed_timer_mod(AspeedTimer *t)
-- 
2.20.1

From: Andrew Jeffery <andrew@aj.id.au>

From the datasheet:

This register stores the current status of counter #N. When timer
  enable bit TMC30[N * b] is disabled, the reload register will be
  loaded into this counter. When timer bit TMC30[N * b] is set, the
  counter will start to decrement. CPU can update this register value
  when enable bit is set.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 20190618165311.27066-9-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/timer/aspeed_timer.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/hw/timer/aspeed_timer.c b/hw/timer/aspeed_timer.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/timer/aspeed_timer.c
+++ b/hw/timer/aspeed_timer.c
@@ -XXX,XX +XXX,XX @@ static uint64_t aspeed_timer_get_value(AspeedTimer *t, int reg)
 
     switch (reg) {
     case TIMER_REG_STATUS:
-        value = calculate_ticks(t, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL));
+        if (timer_enabled(t)) {
+            value = calculate_ticks(t, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL));
+        } else {
+            value = t->reload;
+        }
         break;
     case TIMER_REG_RELOAD:
         value = t->reload;
-- 
2.20.1

From: Andrew Jeffery <andrew@aj.id.au>

If the match value exceeds reload then we don't want to include it in
calculations for the next event.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20190618165311.27066-10-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/timer/aspeed_timer.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

From: Christian Svensson <bluecmd@google.com>

If the host decrements the counter register that results in a negative
delta. This is then passed to muldiv64 which only handles unsigned
numbers resulting in bogus results.

This fix ensures the delta being operated on is positive.

Test case: kexec a kernel using aspeed_timer and it will freeze on the
second bootup when the kernel initializes the timer. With this patch
that no longer happens and the timer appears to run OK.

Signed-off-by: Christian Svensson <bluecmd@google.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 20190618165311.27066-12-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/timer/aspeed_timer.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/hw/timer/aspeed_timer.c b/hw/timer/aspeed_timer.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/timer/aspeed_timer.c
+++ b/hw/timer/aspeed_timer.c
@@ -XXX,XX +XXX,XX @@ static void aspeed_timer_set_value(AspeedTimerCtrlState *s, int timer, int reg,
             int64_t delta = (int64_t) value - (int64_t) calculate_ticks(t, now);
             uint32_t rate = calculate_rate(t);
 
-            t->start += muldiv64(delta, NANOSECONDS_PER_SECOND, rate);
+            if (delta >= 0) {
+                t->start += muldiv64(delta, NANOSECONDS_PER_SECOND, rate);
+            } else {
+                t->start -= muldiv64(-delta, NANOSECONDS_PER_SECOND, rate);
+            }
             aspeed_timer_mod(t);
         }
         break;
-- 
2.20.1

From: Cédric Le Goater <clg@kaod.org>

It has never been used as far as I can tell from the git history.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 20190618165311.27066-13-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/aspeed.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/aspeed.c
+++ b/hw/arm/aspeed.c
@@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine,
     memory_region_allocate_system_memory(&bmc->ram, NULL, "ram", ram_size);
     memory_region_add_subregion(get_system_memory(),
                                 sc->info->memmap[ASPEED_SDRAM], &bmc->ram);
-    object_property_add_const_link(OBJECT(&bmc->soc), "ram", OBJECT(&bmc->ram),
-                                   &error_abort);
 
     max_ram_size = object_property_get_uint(OBJECT(&bmc->soc), "max-ram-size",
                                             &error_abort);
-- 
2.20.1

From: Cédric Le Goater <clg@kaod.org>

The RAM memory region is defined after the SoC is realized when the
SDMC controller has checked that the defined RAM size for the machine
is correct. This is problematic for controller models requiring a link
on the RAM region, for DMA support in the SMC controller for instance.

Introduce a container memory region for the RAM that we can link into
the controllers early, before the SoC is realized. It will be
populated with the RAM region after the checks have be done.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 20190618165311.27066-14-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/aspeed.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/aspeed.c
+++ b/hw/arm/aspeed.c
@@ -XXX,XX +XXX,XX @@ static struct arm_boot_info aspeed_board_binfo = {
 
 struct AspeedBoardState {
     AspeedSoCState soc;
+    MemoryRegion ram_container;
     MemoryRegion ram;
     MemoryRegion max_ram;
 };
@@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine,
     ram_addr_t max_ram_size;
 
     bmc = g_new0(AspeedBoardState, 1);
+
+    memory_region_init(&bmc->ram_container, NULL, "aspeed-ram-container",
+                       UINT32_MAX);
+
     object_initialize_child(OBJECT(machine), "soc", &bmc->soc,
                             (sizeof(bmc->soc)), cfg->soc_name, &error_abort,
                             NULL);
@@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine,
                                         &error_abort);
 
     memory_region_allocate_system_memory(&bmc->ram, NULL, "ram", ram_size);
+    memory_region_add_subregion(&bmc->ram_container, 0, &bmc->ram);
     memory_region_add_subregion(get_system_memory(),
-                                sc->info->memmap[ASPEED_SDRAM], &bmc->ram);
+                                sc->info->memmap[ASPEED_SDRAM],
+                                &bmc->ram_container);
 
     max_ram_size = object_property_get_uint(OBJECT(&bmc->soc), "max-ram-size",
                                             &error_abort);
     memory_region_init_io(&bmc->max_ram, NULL, &max_ram_ops, NULL,
                           "max_ram", max_ram_size  - ram_size);
-    memory_region_add_subregion(get_system_memory(),
-                                sc->info->memmap[ASPEED_SDRAM] + ram_size,
-                                &bmc->max_ram);
+    memory_region_add_subregion(&bmc->ram_container, ram_size, &bmc->max_ram);
 
     aspeed_board_init_flashes(&bmc->soc.fmc, cfg->fmc_model, &error_abort);
     aspeed_board_init_flashes(&bmc->soc.spi[0], cfg->spi_model, &error_abort);
-- 
2.20.1

From: Cédric Le Goater <clg@kaod.org>

The DRAM address of a DMA transaction depends on the DRAM base address
of the SoC. Inform the SMC controller model with this value.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190618165311.27066-15-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/ssi/aspeed_smc.h | 3 +++
 hw/arm/aspeed_soc.c         | 6 ++++++
 hw/ssi/aspeed_smc.c         | 1 +
 3 files changed, 10 insertions(+)

diff --git a/include/hw/ssi/aspeed_smc.h b/include/hw/ssi/aspeed_smc.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/ssi/aspeed_smc.h
+++ b/include/hw/ssi/aspeed_smc.h
@@ -XXX,XX +XXX,XX @@ typedef struct AspeedSMCState {
     uint8_t r_timings;
     uint8_t conf_enable_w0;
 
+    /* for DMA support */
+    uint64_t sdram_base;
+
     AspeedSMCFlash *flashes;
 
     uint8_t snoop_index;
diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/aspeed_soc.c
+++ b/hw/arm/aspeed_soc.c
@@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp)
                        aspeed_soc_get_irq(s, ASPEED_I2C));
 
     /* FMC, The number of CS is set at the board level */
+    object_property_set_int(OBJECT(&s->fmc), sc->info->memmap[ASPEED_SDRAM],
+                            "sdram-base", &err);
+    if (err) {
+        error_propagate(errp, err);
+        return;
+    }
     object_property_set_bool(OBJECT(&s->fmc), true, "realized", &err);
     if (err) {
         error_propagate(errp, err);
diff --git a/hw/ssi/aspeed_smc.c b/hw/ssi/aspeed_smc.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/ssi/aspeed_smc.c
+++ b/hw/ssi/aspeed_smc.c
@@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_aspeed_smc = {
 
 static Property aspeed_smc_properties[] = {
     DEFINE_PROP_UINT32("num-cs", AspeedSMCState, num_cs, 1),
+    DEFINE_PROP_UINT64("sdram-base", AspeedSMCState, sdram_base, 0),
     DEFINE_PROP_END_OF_LIST(),
 };
 
-- 
2.20.1

From: Adriana Kobylak <anoo@us.ibm.com>

The Swift board is an OpenPOWER system hosting POWER processors.
Add support for their BMC including the I2C devices as found on HW.

Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 20190618165311.27066-20-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/aspeed.c | 50 +++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 50 insertions(+)

diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/aspeed.c
+++ b/hw/arm/aspeed.c
@@ -XXX,XX +XXX,XX @@ struct AspeedBoardState {
         SCU_AST2500_HW_STRAP_ACPI_ENABLE |                              \
         SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER))
 
+/* Swift hardware value: 0xF11AD206 */
+#define SWIFT_BMC_HW_STRAP1 (                                           \
+        AST2500_HW_STRAP1_DEFAULTS |                                    \
+        SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE |                     \
+        SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE |                        \
+        SCU_AST2500_HW_STRAP_UART_DEBUG |                               \
+        SCU_AST2500_HW_STRAP_DDR4_ENABLE |                              \
+        SCU_H_PLL_BYPASS_EN |                                           \
+        SCU_AST2500_HW_STRAP_ACPI_ENABLE |                              \
+        SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER))
+
 /* Witherspoon hardware value: 0xF10AD216 (but use romulus definition) */
 #define WITHERSPOON_BMC_HW_STRAP1 ROMULUS_BMC_HW_STRAP1
 
@@ -XXX,XX +XXX,XX @@ static void romulus_bmc_i2c_init(AspeedBoardState *bmc)
     i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "ds1338", 0x32);
 }
 
+static void swift_bmc_i2c_init(AspeedBoardState *bmc)
+{
+    AspeedSoCState *soc = &bmc->soc;
+
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), "pca9552", 0x60);
+
+    /* The swift board expects a TMP275 but a TMP105 is compatible */
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "tmp105", 0x48);
+    /* The swift board expects a pca9551 but a pca9552 is compatible */
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "pca9552", 0x60);
+
+    /* The swift board expects an Epson RX8900 RTC but a ds1338 is compatible */
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 8), "ds1338", 0x32);
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 8), "pca9552", 0x60);
+
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "tmp423", 0x4c);
+    /* The swift board expects a pca9539 but a pca9552 is compatible */
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "pca9552", 0x74);
+
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 10), "tmp423", 0x4c);
+    /* The swift board expects a pca9539 but a pca9552 is compatible */
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 10), "pca9552",
+                     0x74);
+
+    /* The swift board expects a TMP275 but a TMP105 is compatible */
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 12), "tmp105", 0x48);
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 12), "tmp105", 0x4a);
+}
+
 static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc)
 {
     AspeedSoCState *soc = &bmc->soc;
@@ -XXX,XX +XXX,XX @@ static const AspeedBoardConfig aspeed_boards[] = {
         .num_cs    = 2,
         .i2c_init  = romulus_bmc_i2c_init,
         .ram       = 512 * MiB,
+    }, {
+        .name      = MACHINE_TYPE_NAME("swift-bmc"),
+        .desc      = "OpenPOWER Swift BMC (ARM1176)",
+        .soc_name  = "ast2500-a1",
+        .hw_strap1 = SWIFT_BMC_HW_STRAP1,
+        .fmc_model = "mx66l1g45g",
+        .spi_model = "mx66l1g45g",
+        .num_cs    = 2,
+        .i2c_init  = swift_bmc_i2c_init,
+        .ram       = 512 * MiB,
     }, {
         .name      = MACHINE_TYPE_NAME("witherspoon-bmc"),
         .desc      = "OpenPOWER Witherspoon BMC (ARM1176)",
-- 
2.20.1

From: Eddie James <eajames@linux.ibm.com>

The XDMA engine embedded in the Aspeed SOCs performs PCI DMA operations
between the SOC (acting as a BMC) and a host processor in a server.

The XDMA engine exists on the AST2400, AST2500, and AST2600 SOCs, so
enable it for all of those. Add trace events on the important register
writes in the XDMA engine.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20190618165311.27066-21-clg@kaod.org
[clg: - changed title ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/misc/Makefile.objs         |   1 +
 include/hw/arm/aspeed_soc.h   |   3 +
 include/hw/misc/aspeed_xdma.h |  30 +++++++
 hw/arm/aspeed_soc.c           |  17 ++++
 hw/misc/aspeed_xdma.c         | 165 ++++++++++++++++++++++++++++++++++
 hw/misc/trace-events          |   3 +
 6 files changed, 219 insertions(+)
 create mode 100644 include/hw/misc/aspeed_xdma.h
 create mode 100644 hw/misc/aspeed_xdma.c

diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs
index XXXXXXX..XXXXXXX 100644
--- a/hw/misc/Makefile.objs
+++ b/hw/misc/Makefile.objs
@@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_ARMSSE_MHU) += armsse-mhu.o
 
 obj-$(CONFIG_PVPANIC) += pvpanic.o
 obj-$(CONFIG_AUX) += auxbus.o
+obj-$(CONFIG_ASPEED_SOC) += aspeed_xdma.o
 obj-$(CONFIG_ASPEED_SOC) += aspeed_scu.o aspeed_sdmc.o
 obj-$(CONFIG_MSF2) += msf2-sysreg.o
 obj-$(CONFIG_NRF51_SOC) += nrf51_rng.o
diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/aspeed_soc.h
+++ b/include/hw/arm/aspeed_soc.h
@@ -XXX,XX +XXX,XX @@
 #include "hw/intc/aspeed_vic.h"
 #include "hw/misc/aspeed_scu.h"
 #include "hw/misc/aspeed_sdmc.h"
+#include "hw/misc/aspeed_xdma.h"
 #include "hw/timer/aspeed_timer.h"
 #include "hw/timer/aspeed_rtc.h"
 #include "hw/i2c/aspeed_i2c.h"
@@ -XXX,XX +XXX,XX @@ typedef struct AspeedSoCState {
     AspeedTimerCtrlState timerctrl;
     AspeedI2CState i2c;
     AspeedSCUState scu;
+    AspeedXDMAState xdma;
     AspeedSMCState fmc;
     AspeedSMCState spi[ASPEED_SPIS_NUM];
     AspeedSDMCState sdmc;
@@ -XXX,XX +XXX,XX @@ enum {
     ASPEED_ETH1,
     ASPEED_ETH2,
     ASPEED_SDRAM,
+    ASPEED_XDMA,
 };
 
 #endif /* ASPEED_SOC_H */
diff --git a/include/hw/misc/aspeed_xdma.h b/include/hw/misc/aspeed_xdma.h
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/include/hw/misc/aspeed_xdma.h
@@ -XXX,XX +XXX,XX @@
+/*
+ * ASPEED XDMA Controller
+ * Eddie James <eajames@linux.ibm.com>
+ *
+ * Copyright (C) 2019 IBM Corp.
+ * SPDX-License-Identifer: GPL-2.0-or-later
+ */
+
+#ifndef ASPEED_XDMA_H
+#define ASPEED_XDMA_H
+
+#include "hw/sysbus.h"
+
+#define TYPE_ASPEED_XDMA "aspeed.xdma"
+#define ASPEED_XDMA(obj) OBJECT_CHECK(AspeedXDMAState, (obj), TYPE_ASPEED_XDMA)
+
+#define ASPEED_XDMA_NUM_REGS (ASPEED_XDMA_REG_SIZE / sizeof(uint32_t))
+#define ASPEED_XDMA_REG_SIZE 0x7C
+
+typedef struct AspeedXDMAState {
+    SysBusDevice parent;
+
+    MemoryRegion iomem;
+    qemu_irq irq;
+
+    char bmc_cmdq_readp_set;
+    uint32_t regs[ASPEED_XDMA_NUM_REGS];
+} AspeedXDMAState;
+
+#endif /* ASPEED_XDMA_H */
diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/aspeed_soc.c
+++ b/hw/arm/aspeed_soc.c
@@ -XXX,XX +XXX,XX @@ static const hwaddr aspeed_soc_ast2400_memmap[] = {
     [ASPEED_VIC]    = 0x1E6C0000,
     [ASPEED_SDMC]   = 0x1E6E0000,
     [ASPEED_SCU]    = 0x1E6E2000,
+    [ASPEED_XDMA]   = 0x1E6E7000,
     [ASPEED_ADC]    = 0x1E6E9000,
     [ASPEED_SRAM]   = 0x1E720000,
     [ASPEED_GPIO]   = 0x1E780000,
@@ -XXX,XX +XXX,XX @@ static const hwaddr aspeed_soc_ast2500_memmap[] = {
     [ASPEED_VIC]    = 0x1E6C0000,
     [ASPEED_SDMC]   = 0x1E6E0000,
     [ASPEED_SCU]    = 0x1E6E2000,
+    [ASPEED_XDMA]   = 0x1E6E7000,
     [ASPEED_ADC]    = 0x1E6E9000,
     [ASPEED_SRAM]   = 0x1E720000,
     [ASPEED_GPIO]   = 0x1E780000,
@@ -XXX,XX +XXX,XX @@ static const int aspeed_soc_ast2400_irqmap[] = {
     [ASPEED_I2C]    = 12,
     [ASPEED_ETH1]   = 2,
     [ASPEED_ETH2]   = 3,
+    [ASPEED_XDMA]   = 6,
 };
 
 #define aspeed_soc_ast2500_irqmap aspeed_soc_ast2400_irqmap
@@ -XXX,XX +XXX,XX @@ static void aspeed_soc_init(Object *obj)
         sysbus_init_child_obj(obj, "ftgmac100[*]", OBJECT(&s->ftgmac100[i]),
                               sizeof(s->ftgmac100[i]), TYPE_FTGMAC100);
     }
+
+    sysbus_init_child_obj(obj, "xdma", OBJECT(&s->xdma), sizeof(s->xdma),
+                          TYPE_ASPEED_XDMA);
 }
 
 static void aspeed_soc_realize(DeviceState *dev, Error **errp)
@@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp)
         sysbus_connect_irq(SYS_BUS_DEVICE(&s->ftgmac100[i]), 0,
                            aspeed_soc_get_irq(s, ASPEED_ETH1 + i));
     }
+
+    /* XDMA */
+    object_property_set_bool(OBJECT(&s->xdma), true, "realized", &err);
+    if (err) {
+        error_propagate(errp, err);
+        return;
+    }
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->xdma), 0,
+                    sc->info->memmap[ASPEED_XDMA]);
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->xdma), 0,
+                       aspeed_soc_get_irq(s, ASPEED_XDMA));
 }
 static Property aspeed_soc_properties[] = {
     DEFINE_PROP_UINT32("num-cpus", AspeedSoCState, num_cpus, 0),
diff --git a/hw/misc/aspeed_xdma.c b/hw/misc/aspeed_xdma.c
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/hw/misc/aspeed_xdma.c
@@ -XXX,XX +XXX,XX @@
+/*
+ * ASPEED XDMA Controller
+ * Eddie James <eajames@linux.ibm.com>
+ *
+ * Copyright (C) 2019 IBM Corp
+ * SPDX-License-Identifer: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "qemu/error-report.h"
+#include "hw/misc/aspeed_xdma.h"
+#include "qapi/error.h"
+
+#include "trace.h"
+
+#define XDMA_BMC_CMDQ_ADDR         0x10
+#define XDMA_BMC_CMDQ_ENDP         0x14
+#define XDMA_BMC_CMDQ_WRP          0x18
+#define  XDMA_BMC_CMDQ_W_MASK      0x0003FFFF
+#define XDMA_BMC_CMDQ_RDP          0x1C
+#define  XDMA_BMC_CMDQ_RDP_MAGIC   0xEE882266
+#define XDMA_IRQ_ENG_CTRL          0x20
+#define  XDMA_IRQ_ENG_CTRL_US_COMP BIT(4)
+#define  XDMA_IRQ_ENG_CTRL_DS_COMP BIT(5)
+#define  XDMA_IRQ_ENG_CTRL_W_MASK  0xBFEFF07F
+#define XDMA_IRQ_ENG_STAT          0x24
+#define  XDMA_IRQ_ENG_STAT_US_COMP BIT(4)
+#define  XDMA_IRQ_ENG_STAT_DS_COMP BIT(5)
+#define  XDMA_IRQ_ENG_STAT_RESET   0xF8000000
+#define XDMA_MEM_SIZE              0x1000
+
+#define TO_REG(addr) ((addr) / sizeof(uint32_t))
+
+static uint64_t aspeed_xdma_read(void *opaque, hwaddr addr, unsigned int size)
+{
+    uint32_t val = 0;
+    AspeedXDMAState *xdma = opaque;
+
+    if (addr < ASPEED_XDMA_REG_SIZE) {
+        val = xdma->regs[TO_REG(addr)];
+    }
+
+    return (uint64_t)val;
+}
+
+static void aspeed_xdma_write(void *opaque, hwaddr addr, uint64_t val,
+                              unsigned int size)
+{
+    unsigned int idx;
+    uint32_t val32 = (uint32_t)val;
+    AspeedXDMAState *xdma = opaque;
+
+    if (addr >= ASPEED_XDMA_REG_SIZE) {
+        return;
+    }
+
+    switch (addr) {
+    case XDMA_BMC_CMDQ_ENDP:
+        xdma->regs[TO_REG(addr)] = val32 & XDMA_BMC_CMDQ_W_MASK;
+        break;
+    case XDMA_BMC_CMDQ_WRP:
+        idx = TO_REG(addr);
+        xdma->regs[idx] = val32 & XDMA_BMC_CMDQ_W_MASK;
+        xdma->regs[TO_REG(XDMA_BMC_CMDQ_RDP)] = xdma->regs[idx];
+
+        trace_aspeed_xdma_write(addr, val);
+
+        if (xdma->bmc_cmdq_readp_set) {
+            xdma->bmc_cmdq_readp_set = 0;
+        } else {
+            xdma->regs[TO_REG(XDMA_IRQ_ENG_STAT)] |=
+                XDMA_IRQ_ENG_STAT_US_COMP | XDMA_IRQ_ENG_STAT_DS_COMP;
+
+            if (xdma->regs[TO_REG(XDMA_IRQ_ENG_CTRL)] &
+                (XDMA_IRQ_ENG_CTRL_US_COMP | XDMA_IRQ_ENG_CTRL_DS_COMP))
+                qemu_irq_raise(xdma->irq);
+        }
+        break;
+    case XDMA_BMC_CMDQ_RDP:
+        trace_aspeed_xdma_write(addr, val);
+
+        if (val32 == XDMA_BMC_CMDQ_RDP_MAGIC) {
+            xdma->bmc_cmdq_readp_set = 1;
+        }
+        break;
+    case XDMA_IRQ_ENG_CTRL:
+        xdma->regs[TO_REG(addr)] = val32 & XDMA_IRQ_ENG_CTRL_W_MASK;
+        break;
+    case XDMA_IRQ_ENG_STAT:
+        trace_aspeed_xdma_write(addr, val);
+
+        idx = TO_REG(addr);
+        if (val32 & (XDMA_IRQ_ENG_STAT_US_COMP | XDMA_IRQ_ENG_STAT_DS_COMP)) {
+            xdma->regs[idx] &=
+                ~(XDMA_IRQ_ENG_STAT_US_COMP | XDMA_IRQ_ENG_STAT_DS_COMP);
+            qemu_irq_lower(xdma->irq);
+        }
+        break;
+    default:
+        xdma->regs[TO_REG(addr)] = val32;
+        break;
+    }
+}
+
+static const MemoryRegionOps aspeed_xdma_ops = {
+    .read = aspeed_xdma_read,
+    .write = aspeed_xdma_write,
+    .endianness = DEVICE_NATIVE_ENDIAN,
+    .valid.min_access_size = 4,
+    .valid.max_access_size = 4,
+};
+
+static void aspeed_xdma_realize(DeviceState *dev, Error **errp)
+{
+    SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
+    AspeedXDMAState *xdma = ASPEED_XDMA(dev);
+
+    sysbus_init_irq(sbd, &xdma->irq);
+    memory_region_init_io(&xdma->iomem, OBJECT(xdma), &aspeed_xdma_ops, xdma,
+                          TYPE_ASPEED_XDMA, XDMA_MEM_SIZE);
+    sysbus_init_mmio(sbd, &xdma->iomem);
+}
+
+static void aspeed_xdma_reset(DeviceState *dev)
+{
+    AspeedXDMAState *xdma = ASPEED_XDMA(dev);
+
+    xdma->bmc_cmdq_readp_set = 0;
+    memset(xdma->regs, 0, ASPEED_XDMA_REG_SIZE);
+    xdma->regs[TO_REG(XDMA_IRQ_ENG_STAT)] = XDMA_IRQ_ENG_STAT_RESET;
+
+    qemu_irq_lower(xdma->irq);
+}
+
+static const VMStateDescription aspeed_xdma_vmstate = {
+    .name = TYPE_ASPEED_XDMA,
+    .version_id = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT32_ARRAY(regs, AspeedXDMAState, ASPEED_XDMA_NUM_REGS),
+        VMSTATE_END_OF_LIST(),
+    },
+};
+
+static void aspeed_xdma_class_init(ObjectClass *classp, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(classp);
+
+    dc->realize = aspeed_xdma_realize;
+    dc->reset = aspeed_xdma_reset;
+    dc->vmsd = &aspeed_xdma_vmstate;
+}
+
+static const TypeInfo aspeed_xdma_info = {
+    .name          = TYPE_ASPEED_XDMA,
+    .parent        = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(AspeedXDMAState),
+    .class_init    = aspeed_xdma_class_init,
+};
+
+static void aspeed_xdma_register_type(void)
+{
+    type_register_static(&aspeed_xdma_info);
+}
+type_init(aspeed_xdma_register_type);
diff --git a/hw/misc/trace-events b/hw/misc/trace-events
index XXXXXXX..XXXXXXX 100644
--- a/hw/misc/trace-events
+++ b/hw/misc/trace-events
@@ -XXX,XX +XXX,XX @@ armsse_cpuid_write(uint64_t offset, uint64_t data, unsigned size) "SSE-200 CPU_I
 # armsse-mhu.c
 armsse_mhu_read(uint64_t offset, uint64_t data, unsigned size) "SSE-200 MHU read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"
 armsse_mhu_write(uint64_t offset, uint64_t data, unsigned size) "SSE-200 MHU write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"
+
+# aspeed_xdma.c
+aspeed_xdma_write(uint64_t offset, uint64_t data) "XDMA write: offset 0x%" PRIx64 " data 0x%" PRIx64
-- 
2.20.1

From: Andrew Jeffery <andrew@aj.id.au>

The legacy interface only supported up to 32 IRQs, which became
restrictive around the AST2400 generation. QEMU support for the SoCs
started with the AST2400 along with an effort to reimplement and
upstream drivers for Linux, so up until this point the consumers of the
QEMU ASPEED support only required the 64 IRQ register interface.

In an effort to support older BMC firmware, add support for the 32 IRQ
interface.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 20190618165311.27066-22-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/intc/aspeed_vic.c | 105 ++++++++++++++++++++++++++-----------------
 1 file changed, 63 insertions(+), 42 deletions(-)

diff --git a/hw/intc/aspeed_vic.c b/hw/intc/aspeed_vic.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/intc/aspeed_vic.c
+++ b/hw/intc/aspeed_vic.c
@@ -XXX,XX +XXX,XX @@ static void aspeed_vic_set_irq(void *opaque, int irq, int level)
 
 static uint64_t aspeed_vic_read(void *opaque, hwaddr offset, unsigned size)
 {
-    uint64_t val;
-    const bool high = !!(offset & 0x4);
-    hwaddr n_offset = (offset & ~0x4);
     AspeedVICState *s = (AspeedVICState *)opaque;
+    hwaddr n_offset;
+    uint64_t val;
+    bool high;
 
     if (offset < AVIC_NEW_BASE_OFFSET) {
-        qemu_log_mask(LOG_UNIMP, "%s: Ignoring read from legacy registers "
-                      "at 0x%" HWADDR_PRIx "[%u]\n", __func__, offset, size);
-        return 0;
+        high = false;
+        n_offset = offset;
+    } else {
+        high = !!(offset & 0x4);
+        n_offset = (offset & ~0x4);
     }
 
-    n_offset -= AVIC_NEW_BASE_OFFSET;
-
     switch (n_offset) {
-    case 0x0: /* IRQ Status */
+    case 0x80: /* IRQ Status */
+    case 0x00:
         val = s->raw & ~s->select & s->enable;
         break;
-    case 0x08: /* FIQ Status */
+    case 0x88: /* FIQ Status */
+    case 0x04:
         val = s->raw & s->select & s->enable;
         break;
-    case 0x10: /* Raw Interrupt Status */
+    case 0x90: /* Raw Interrupt Status */
+    case 0x08:
         val = s->raw;
         break;
-    case 0x18: /* Interrupt Selection */
+    case 0x98: /* Interrupt Selection */
+    case 0x0c:
         val = s->select;
         break;
-    case 0x20: /* Interrupt Enable */
+    case 0xa0: /* Interrupt Enable */
+    case 0x10:
         val = s->enable;
         break;
-    case 0x30: /* Software Interrupt */
+    case 0xb0: /* Software Interrupt */
+    case 0x18:
         val = s->trigger;
         break;
-    case 0x40: /* Interrupt Sensitivity */
+    case 0xc0: /* Interrupt Sensitivity */
+    case 0x24:
         val = s->sense;
         break;
-    case 0x48: /* Interrupt Both Edge Trigger Control */
+    case 0xc8: /* Interrupt Both Edge Trigger Control */
+    case 0x28:
         val = s->dual_edge;
         break;
-    case 0x50: /* Interrupt Event */
+    case 0xd0: /* Interrupt Event */
+    case 0x2c:
         val = s->event;
         break;
-    case 0x60: /* Edge Triggered Interrupt Status */
+    case 0xe0: /* Edge Triggered Interrupt Status */
         val = s->raw & ~s->sense;
         break;
         /* Illegal */
-    case 0x28: /* Interrupt Enable Clear */
-    case 0x38: /* Software Interrupt Clear */
-    case 0x58: /* Edge Triggered Interrupt Clear */
+    case 0xa8: /* Interrupt Enable Clear */
+    case 0xb8: /* Software Interrupt Clear */
+    case 0xd8: /* Edge Triggered Interrupt Clear */
         qemu_log_mask(LOG_GUEST_ERROR,
                       "%s: Read of write-only register with offset 0x%"
                       HWADDR_PRIx "\n", __func__, offset);
@@ -XXX,XX +XXX,XX @@ static uint64_t aspeed_vic_read(void *opaque, hwaddr offset, unsigned size)
     }
     if (high) {
         val = extract64(val, 32, 19);
+    } else {
+        val = extract64(val, 0, 32);
     }
     trace_aspeed_vic_read(offset, size, val);
     return val;
@@ -XXX,XX +XXX,XX @@ static uint64_t aspeed_vic_read(void *opaque, hwaddr offset, unsigned size)
 static void aspeed_vic_write(void *opaque, hwaddr offset, uint64_t data,
                              unsigned size)
 {
-    const bool high = !!(offset & 0x4);
-    hwaddr n_offset = (offset & ~0x4);
     AspeedVICState *s = (AspeedVICState *)opaque;
+    hwaddr n_offset;
+    bool high;
 
     if (offset < AVIC_NEW_BASE_OFFSET) {
-        qemu_log_mask(LOG_UNIMP,
-                      "%s: Ignoring write to legacy registers at 0x%"
-                      HWADDR_PRIx "[%u] <- 0x%" PRIx64 "\n", __func__, offset,
-                      size, data);
-        return;
+        high = false;
+        n_offset = offset;
+    } else {
+        high = !!(offset & 0x4);
+        n_offset = (offset & ~0x4);
     }
 
-    n_offset -= AVIC_NEW_BASE_OFFSET;
     trace_aspeed_vic_write(offset, size, data);
 
     /* Given we have members using separate enable/clear registers, deposit64()
@@ -XXX,XX +XXX,XX @@ static void aspeed_vic_write(void *opaque, hwaddr offset, uint64_t data,
     }
 
     switch (n_offset) {
-    case 0x18: /* Interrupt Selection */
+    case 0x98: /* Interrupt Selection */
+    case 0x0c:
         /* Register has deposit64() semantics - overwrite requested 32 bits */
         if (high) {
             s->select &= AVIC_L_MASK;
@@ -XXX,XX +XXX,XX @@ static void aspeed_vic_write(void *opaque, hwaddr offset, uint64_t data,
         }
         s->select |= data;
         break;
-    case 0x20: /* Interrupt Enable */
+    case 0xa0: /* Interrupt Enable */
+    case 0x10:
         s->enable |= data;
         break;
-    case 0x28: /* Interrupt Enable Clear */
+    case 0xa8: /* Interrupt Enable Clear */
+    case 0x14:
         s->enable &= ~data;
         break;
-    case 0x30: /* Software Interrupt */
+    case 0xb0: /* Software Interrupt */
+    case 0x18:
         qemu_log_mask(LOG_UNIMP, "%s: Software interrupts unavailable. "
                       "IRQs requested: 0x%016" PRIx64 "\n", __func__, data);
         break;
-    case 0x38: /* Software Interrupt Clear */
+    case 0xb8: /* Software Interrupt Clear */
+    case 0x1c:
         qemu_log_mask(LOG_UNIMP, "%s: Software interrupts unavailable. "
                       "IRQs to be cleared: 0x%016" PRIx64 "\n", __func__, data);
         break;
-    case 0x50: /* Interrupt Event */
+    case 0xd0: /* Interrupt Event */
         /* Register has deposit64() semantics - overwrite the top four valid
          * IRQ bits, as only the top four IRQs (GPIOs) can change their event
          * type */
@@ -XXX,XX +XXX,XX @@ static void aspeed_vic_write(void *opaque, hwaddr offset, uint64_t data,
                           "Ignoring invalid write to interrupt event register");
         }
         break;
-    case 0x58: /* Edge Triggered Interrupt Clear */
+    case 0xd8: /* Edge Triggered Interrupt Clear */
+    case 0x38:
         s->raw &= ~(data & ~s->sense);
         break;
-    case 0x00: /* IRQ Status */
-    case 0x08: /* FIQ Status */
-    case 0x10: /* Raw Interrupt Status */
-    case 0x40: /* Interrupt Sensitivity */
-    case 0x48: /* Interrupt Both Edge Trigger Control */
-    case 0x60: /* Edge Triggered Interrupt Status */
+    case 0x80: /* IRQ Status */
+    case 0x00:
+    case 0x88: /* FIQ Status */
+    case 0x04:
+    case 0x90: /* Raw Interrupt Status */
+    case 0x08:
+    case 0xc0: /* Interrupt Sensitivity */
+    case 0x24:
+    case 0xc8: /* Interrupt Both Edge Trigger Control */
+    case 0x28:
+    case 0xe0: /* Edge Triggered Interrupt Status */
         qemu_log_mask(LOG_GUEST_ERROR,
                       "%s: Write of read-only register with offset 0x%"
                       HWADDR_PRIx "\n", __func__, offset);
-- 
2.20.1

From: Joel Stanley <joel@jms.id.au>

The ast2500 uses the watchdog to reset the SDRAM controller. This
operation is usually performed by u-boot's memory training procedure,
and it is enabled by setting a bit in the SCU and then causing the
watchdog to expire. Therefore, we need the watchdog to be able to
access the SCU's register space.

This causes the watchdog to not perform a system reset when the bit is
set. In the future it could perform a reset of the SDMC model.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190621065242.32535-1-joel@jms.id.au
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/watchdog/wdt_aspeed.h |  1 +
 hw/arm/aspeed_soc.c              |  2 ++
 hw/watchdog/wdt_aspeed.c         | 20 ++++++++++++++++++++
 3 files changed, 23 insertions(+)

diff --git a/include/hw/watchdog/wdt_aspeed.h b/include/hw/watchdog/wdt_aspeed.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/watchdog/wdt_aspeed.h
+++ b/include/hw/watchdog/wdt_aspeed.h
@@ -XXX,XX +XXX,XX @@ typedef struct AspeedWDTState {
     MemoryRegion iomem;
     uint32_t regs[ASPEED_WDT_REGS_MAX];
 
+    AspeedSCUState *scu;
     uint32_t pclk_freq;
     uint32_t silicon_rev;
     uint32_t ext_pulse_width_mask;
diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/aspeed_soc.c
+++ b/hw/arm/aspeed_soc.c
@@ -XXX,XX +XXX,XX @@ static void aspeed_soc_init(Object *obj)
                               sizeof(s->wdt[i]), TYPE_ASPEED_WDT);
         qdev_prop_set_uint32(DEVICE(&s->wdt[i]), "silicon-rev",
                                     sc->info->silicon_rev);
+        object_property_add_const_link(OBJECT(&s->wdt[i]), "scu",
+                                       OBJECT(&s->scu), &error_abort);
     }
 
     for (i = 0; i < ASPEED_MACS_NUM; i++) {
diff --git a/hw/watchdog/wdt_aspeed.c b/hw/watchdog/wdt_aspeed.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/watchdog/wdt_aspeed.c
+++ b/hw/watchdog/wdt_aspeed.c
@@ -XXX,XX +XXX,XX @@
 
 #define WDT_RESTART_MAGIC               0x4755
 
+#define SCU_RESET_CONTROL1              (0x04 / 4)
+#define    SCU_RESET_SDRAM              BIT(0)
+
 static bool aspeed_wdt_is_enabled(const AspeedWDTState *s)
 {
     return s->regs[WDT_CTRL] & WDT_CTRL_ENABLE;
@@ -XXX,XX +XXX,XX @@ static void aspeed_wdt_timer_expired(void *dev)
 {
     AspeedWDTState *s = ASPEED_WDT(dev);
 
+    /* Do not reset on SDRAM controller reset */
+    if (s->scu->regs[SCU_RESET_CONTROL1] & SCU_RESET_SDRAM) {
+        timer_del(s->timer);
+        s->regs[WDT_CTRL] = 0;
+        return;
+    }
+
     qemu_log_mask(CPU_LOG_RESET, "Watchdog timer expired.\n");
     watchdog_perform_action();
     timer_del(s->timer);
@@ -XXX,XX +XXX,XX @@ static void aspeed_wdt_realize(DeviceState *dev, Error **errp)
 {
     SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
     AspeedWDTState *s = ASPEED_WDT(dev);
+    Error *err = NULL;
+    Object *obj;
+
+    obj = object_property_get_link(OBJECT(dev), "scu", &err);
+    if (!obj) {
+        error_propagate(errp, err);
+        error_prepend(errp, "required link 'scu' not found: ");
+        return;
+    }
+    s->scu = ASPEED_SCU(obj);
 
     if (!is_supported_silicon_rev(s->silicon_rev)) {
         error_setg(errp, "Unknown silicon revision: 0x%" PRIx32,
-- 
2.20.1

From: Hongbo Zhang <hongbo.zhang@linaro.org>

For AArch64, the existing "virt" machine is primarily meant to
run on KVM and execute virtualization workloads, but we need an
environment as faithful as possible to physical hardware, for supporting
firmware and OS development for physical Aarch64 machines.

This patch introduces new machine type 'sbsa-ref' with main features:
 - Based on 'virt' machine type.
 - A new memory map.
 - CPU type cortex-a57.
 - EL2 and EL3 are enabled.
 - GIC version 3.
 - System bus AHCI controller.
 - System bus EHCI controller.
 - CDROM and hard disc on AHCI bus.
 - E1000E ethernet card on PCIE bus.
 - VGA display adaptor on PCIE bus.
 - No virtio devices.
 - No fw_cfg device.
 - No ACPI table supplied.
 - Only minimal device tree nodes.

Arm Trusted Firmware and UEFI porting to this are done accordingly,
and the firmware should supply ACPI tables to the guest OS.  The
minimal device tree nodes supplied by QEMU for this platform are only
to pass the dynamic info reflecting command line input to firmware,
not for loading the guest OS.

To make the review easier, this task is split into two patches, the
fundamental skeleton part and the peripheral devices part; this patch is
the first part.

Signed-off-by: Hongbo Zhang <hongbo.zhang@linaro.org>
Message-id: 1561890034-15921-2-git-send-email-hongbo.zhang@linaro.org
[PMM: commit message tweaks; moved some bits between patch 1 and 2
 to ensure patch 1 builds cleanly; removed unneeded lines from
 Kconfig stanza; only provide board for qemu-system-aarch64, not
 qemu-system-arm; added MAINTAINERS entry]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/Makefile.objs                |   1 +
 hw/arm/sbsa-ref.c                   | 271 ++++++++++++++++++++++++++++
 MAINTAINERS                         |   8 +
 default-configs/aarch64-softmmu.mak |   1 +
 hw/arm/Kconfig                      |  14 ++
 5 files changed, 295 insertions(+)
 create mode 100644 hw/arm/sbsa-ref.c

diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/Makefile.objs
+++ b/hw/arm/Makefile.objs
@@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_SPITZ) += spitz.o
 obj-$(CONFIG_TOSA) += tosa.o
 obj-$(CONFIG_Z2) += z2.o
 obj-$(CONFIG_REALVIEW) += realview.o
+obj-$(CONFIG_SBSA_REF) += sbsa-ref.o
 obj-$(CONFIG_STELLARIS) += stellaris.o
 obj-$(CONFIG_COLLIE) += collie.o
 obj-$(CONFIG_VERSATILE) += versatilepb.o
diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/hw/arm/sbsa-ref.c
@@ -XXX,XX +XXX,XX @@
+/*
+ * ARM SBSA Reference Platform emulation
+ *
+ * Copyright (c) 2018 Linaro Limited
+ * Written by Hongbo Zhang <hongbo.zhang@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or later, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "qemu/error-report.h"
+#include "qemu/units.h"
+#include "sysemu/numa.h"
+#include "sysemu/sysemu.h"
+#include "exec/address-spaces.h"
+#include "exec/hwaddr.h"
+#include "kvm_arm.h"
+#include "hw/arm/boot.h"
+#include "hw/boards.h"
+#include "hw/intc/arm_gicv3_common.h"
+
+#define RAMLIMIT_GB 8192
+#define RAMLIMIT_BYTES (RAMLIMIT_GB * GiB)
+
+enum {
+    SBSA_FLASH,
+    SBSA_MEM,
+    SBSA_CPUPERIPHS,
+    SBSA_GIC_DIST,
+    SBSA_GIC_REDIST,
+    SBSA_SMMU,
+    SBSA_UART,
+    SBSA_RTC,
+    SBSA_PCIE,
+    SBSA_PCIE_MMIO,
+    SBSA_PCIE_MMIO_HIGH,
+    SBSA_PCIE_PIO,
+    SBSA_PCIE_ECAM,
+    SBSA_GPIO,
+    SBSA_SECURE_UART,
+    SBSA_SECURE_UART_MM,
+    SBSA_SECURE_MEM,
+    SBSA_AHCI,
+    SBSA_EHCI,
+};
+
+typedef struct MemMapEntry {
+    hwaddr base;
+    hwaddr size;
+} MemMapEntry;
+
+typedef struct {
+    MachineState parent;
+    struct arm_boot_info bootinfo;
+    int smp_cpus;
+    void *fdt;
+    int fdt_size;
+    int psci_conduit;
+} SBSAMachineState;
+
+#define TYPE_SBSA_MACHINE   MACHINE_TYPE_NAME("sbsa-ref")
+#define SBSA_MACHINE(obj) \
+    OBJECT_CHECK(SBSAMachineState, (obj), TYPE_SBSA_MACHINE)
+
+static const MemMapEntry sbsa_ref_memmap[] = {
+    /* 512M boot ROM */
+    [SBSA_FLASH] =              {          0, 0x20000000 },
+    /* 512M secure memory */
+    [SBSA_SECURE_MEM] =         { 0x20000000, 0x20000000 },
+    /* Space reserved for CPU peripheral devices */
+    [SBSA_CPUPERIPHS] =         { 0x40000000, 0x00040000 },
+    [SBSA_GIC_DIST] =           { 0x40060000, 0x00010000 },
+    [SBSA_GIC_REDIST] =         { 0x40080000, 0x04000000 },
+    [SBSA_UART] =               { 0x60000000, 0x00001000 },
+    [SBSA_RTC] =                { 0x60010000, 0x00001000 },
+    [SBSA_GPIO] =               { 0x60020000, 0x00001000 },
+    [SBSA_SECURE_UART] =        { 0x60030000, 0x00001000 },
+    [SBSA_SECURE_UART_MM] =     { 0x60040000, 0x00001000 },
+    [SBSA_SMMU] =               { 0x60050000, 0x00020000 },
+    /* Space here reserved for more SMMUs */
+    [SBSA_AHCI] =               { 0x60100000, 0x00010000 },
+    [SBSA_EHCI] =               { 0x60110000, 0x00010000 },
+    /* Space here reserved for other devices */
+    [SBSA_PCIE_PIO] =           { 0x7fff0000, 0x00010000 },
+    /* 32-bit address PCIE MMIO space */
+    [SBSA_PCIE_MMIO] =          { 0x80000000, 0x70000000 },
+    /* 256M PCIE ECAM space */
+    [SBSA_PCIE_ECAM] =          { 0xf0000000, 0x10000000 },
+    /* ~1TB PCIE MMIO space (4GB to 1024GB boundary) */
+    [SBSA_PCIE_MMIO_HIGH] =     { 0x100000000ULL, 0xFF00000000ULL },
+    [SBSA_MEM] =                { 0x10000000000ULL, RAMLIMIT_BYTES },
+};
+
+static void sbsa_ref_init(MachineState *machine)
+{
+    SBSAMachineState *sms = SBSA_MACHINE(machine);
+    MachineClass *mc = MACHINE_GET_CLASS(machine);
+    MemoryRegion *sysmem = get_system_memory();
+    MemoryRegion *secure_sysmem = NULL;
+    MemoryRegion *ram = g_new(MemoryRegion, 1);
+    const CPUArchIdList *possible_cpus;
+    int n, sbsa_max_cpus;
+
+    if (strcmp(machine->cpu_type, ARM_CPU_TYPE_NAME("cortex-a57"))) {
+        error_report("sbsa-ref: CPU type other than the built-in "
+                     "cortex-a57 not supported");
+        exit(1);
+    }
+
+    if (kvm_enabled()) {
+        error_report("sbsa-ref: KVM is not supported for this machine");
+        exit(1);
+    }
+
+    /*
+     * This machine has EL3 enabled, external firmware should supply PSCI
+     * implementation, so the QEMU's internal PSCI is disabled.
+     */
+    sms->psci_conduit = QEMU_PSCI_CONDUIT_DISABLED;
+
+    sbsa_max_cpus = sbsa_ref_memmap[SBSA_GIC_REDIST].size / GICV3_REDIST_SIZE;
+
+    if (max_cpus > sbsa_max_cpus) {
+        error_report("Number of SMP CPUs requested (%d) exceeds max CPUs "
+                     "supported by machine 'sbsa-ref' (%d)",
+                     max_cpus, sbsa_max_cpus);
+        exit(1);
+    }
+
+    sms->smp_cpus = smp_cpus;
+
+    if (machine->ram_size > sbsa_ref_memmap[SBSA_MEM].size) {
+        error_report("sbsa-ref: cannot model more than %dGB RAM", RAMLIMIT_GB);
+        exit(1);
+    }
+
+    possible_cpus = mc->possible_cpu_arch_ids(machine);
+    for (n = 0; n < possible_cpus->len; n++) {
+        Object *cpuobj;
+        CPUState *cs;
+
+        if (n >= smp_cpus) {
+            break;
+        }
+
+        cpuobj = object_new(possible_cpus->cpus[n].type);
+        object_property_set_int(cpuobj, possible_cpus->cpus[n].arch_id,
+                                "mp-affinity", NULL);
+
+        cs = CPU(cpuobj);
+        cs->cpu_index = n;
+
+        numa_cpu_pre_plug(&possible_cpus->cpus[cs->cpu_index], DEVICE(cpuobj),
+                          &error_fatal);
+
+        if (object_property_find(cpuobj, "reset-cbar", NULL)) {
+            object_property_set_int(cpuobj,
+                                    sbsa_ref_memmap[SBSA_CPUPERIPHS].base,
+                                    "reset-cbar", &error_abort);
+        }
+
+        object_property_set_link(cpuobj, OBJECT(sysmem), "memory",
+                                 &error_abort);
+
+        object_property_set_link(cpuobj, OBJECT(secure_sysmem),
+                                 "secure-memory", &error_abort);
+
+        object_property_set_bool(cpuobj, true, "realized", &error_fatal);
+        object_unref(cpuobj);
+    }
+
+    memory_region_allocate_system_memory(ram, NULL, "sbsa-ref.ram",
+                                         machine->ram_size);
+    memory_region_add_subregion(sysmem, sbsa_ref_memmap[SBSA_MEM].base, ram);
+
+    sms->bootinfo.ram_size = machine->ram_size;
+    sms->bootinfo.kernel_filename = machine->kernel_filename;
+    sms->bootinfo.nb_cpus = smp_cpus;
+    sms->bootinfo.board_id = -1;
+    sms->bootinfo.loader_start = sbsa_ref_memmap[SBSA_MEM].base;
+    arm_load_kernel(ARM_CPU(first_cpu), &sms->bootinfo);
+}
+
+static uint64_t sbsa_ref_cpu_mp_affinity(SBSAMachineState *sms, int idx)
+{
+    uint8_t clustersz = ARM_DEFAULT_CPUS_PER_CLUSTER;
+    return arm_cpu_mp_affinity(idx, clustersz);
+}
+
+static const CPUArchIdList *sbsa_ref_possible_cpu_arch_ids(MachineState *ms)
+{
+    SBSAMachineState *sms = SBSA_MACHINE(ms);
+    int n;
+
+    if (ms->possible_cpus) {
+        assert(ms->possible_cpus->len == max_cpus);
+        return ms->possible_cpus;
+    }
+
+    ms->possible_cpus = g_malloc0(sizeof(CPUArchIdList) +
+                                  sizeof(CPUArchId) * max_cpus);
+    ms->possible_cpus->len = max_cpus;
+    for (n = 0; n < ms->possible_cpus->len; n++) {
+        ms->possible_cpus->cpus[n].type = ms->cpu_type;
+        ms->possible_cpus->cpus[n].arch_id =
+            sbsa_ref_cpu_mp_affinity(sms, n);
+        ms->possible_cpus->cpus[n].props.has_thread_id = true;
+        ms->possible_cpus->cpus[n].props.thread_id = n;
+    }
+    return ms->possible_cpus;
+}
+
+static CpuInstanceProperties
+sbsa_ref_cpu_index_to_props(MachineState *ms, unsigned cpu_index)
+{
+    MachineClass *mc = MACHINE_GET_CLASS(ms);
+    const CPUArchIdList *possible_cpus = mc->possible_cpu_arch_ids(ms);
+
+    assert(cpu_index < possible_cpus->len);
+    return possible_cpus->cpus[cpu_index].props;
+}
+
+static int64_t
+sbsa_ref_get_default_cpu_node_id(const MachineState *ms, int idx)
+{
+    return idx % nb_numa_nodes;
+}
+
+static void sbsa_ref_class_init(ObjectClass *oc, void *data)
+{
+    MachineClass *mc = MACHINE_CLASS(oc);
+
+    mc->init = sbsa_ref_init;
+    mc->desc = "QEMU 'SBSA Reference' ARM Virtual Machine";
+    mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a57");
+    mc->max_cpus = 512;
+    mc->pci_allow_0_address = true;
+    mc->minimum_page_bits = 12;
+    mc->block_default_type = IF_IDE;
+    mc->no_cdrom = 1;
+    mc->default_ram_size = 1 * GiB;
+    mc->default_cpus = 4;
+    mc->possible_cpu_arch_ids = sbsa_ref_possible_cpu_arch_ids;
+    mc->cpu_index_to_instance_props = sbsa_ref_cpu_index_to_props;
+    mc->get_default_cpu_node_id = sbsa_ref_get_default_cpu_node_id;
+}
+
+static const TypeInfo sbsa_ref_info = {
+    .name          = TYPE_SBSA_MACHINE,
+    .parent        = TYPE_MACHINE,
+    .class_init    = sbsa_ref_class_init,
+    .instance_size = sizeof(SBSAMachineState),
+};
+
+static void sbsa_ref_machine_init(void)
+{
+    type_register_static(&sbsa_ref_info);
+}
+
+type_init(sbsa_ref_machine_init);
diff --git a/MAINTAINERS b/MAINTAINERS
index XXXXXXX..XXXXXXX 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -XXX,XX +XXX,XX @@ F: include/hw/arm/fsl-imx6.h
 F: include/hw/misc/imx6_*.h
 F: include/hw/ssi/imx_spi.h
 
+SBSA-REF
+M: Radoslaw Biernacki <radoslaw.biernacki@linaro.org>
+M: Peter Maydell <peter.maydell@linaro.org>
+R: Leif Lindholm <leif.lindholm@linaro.org>
+L: qemu-arm@nongnu.org
+S: Maintained
+F: hw/arm/sbsa-ref.c
+
 Sharp SL-5500 (Collie) PDA
 M: Peter Maydell <peter.maydell@linaro.org>
 L: qemu-arm@nongnu.org
diff --git a/default-configs/aarch64-softmmu.mak b/default-configs/aarch64-softmmu.mak
index XXXXXXX..XXXXXXX 100644
--- a/default-configs/aarch64-softmmu.mak
+++ b/default-configs/aarch64-softmmu.mak
@@ -XXX,XX +XXX,XX @@ include arm-softmmu.mak
 
 CONFIG_XLNX_ZYNQMP_ARM=y
 CONFIG_XLNX_VERSAL=y
+CONFIG_SBSA_REF=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -XXX,XX +XXX,XX @@ config REALVIEW
     select DS1338 # I2C RTC+NVRAM
     select USB_OHCI
 
+config SBSA_REF
+    bool
+    imply PCI_DEVICES
+    select AHCI
+    select ARM_SMMUV3
+    select GPIO_KEY
+    select PCI_EXPRESS
+    select PCI_EXPRESS_GENERIC_BRIDGE
+    select PFLASH_CFI01
+    select PL011 # UART
+    select PL031 # RTC
+    select PL061 # GPIO
+    select USB_EHCI_SYSBUS
+
 config SABRELITE
     bool
     select FSL_IMX6
-- 
2.20.1

From: Hongbo Zhang <hongbo.zhang@linaro.org>

Following the previous patch, this patch adds peripheral devices to the
newly introduced SBSA-ref machine.

Signed-off-by: Hongbo Zhang <hongbo.zhang@linaro.org>
Message-id: 1561890034-15921-3-git-send-email-hongbo.zhang@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/sbsa-ref.c | 535 ++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 535 insertions(+)

diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/sbsa-ref.c
+++ b/hw/arm/sbsa-ref.c
@@ -XXX,XX +XXX,XX @@
  */
 
 #include "qemu/osdep.h"
+#include "qemu-common.h"
 #include "qapi/error.h"
 #include "qemu/error-report.h"
 #include "qemu/units.h"
+#include "sysemu/device_tree.h"
 #include "sysemu/numa.h"
 #include "sysemu/sysemu.h"
 #include "exec/address-spaces.h"
 #include "exec/hwaddr.h"
 #include "kvm_arm.h"
 #include "hw/arm/boot.h"
+#include "hw/block/flash.h"
 #include "hw/boards.h"
+#include "hw/ide/internal.h"
+#include "hw/ide/ahci_internal.h"
 #include "hw/intc/arm_gicv3_common.h"
+#include "hw/loader.h"
+#include "hw/pci-host/gpex.h"
+#include "hw/usb.h"
+#include "net/net.h"
 
 #define RAMLIMIT_GB 8192
 #define RAMLIMIT_BYTES (RAMLIMIT_GB * GiB)
 
+#define NUM_IRQS        256
+#define NUM_SMMU_IRQS   4
+#define NUM_SATA_PORTS  6
+
+#define VIRTUAL_PMU_IRQ        7
+#define ARCH_GIC_MAINT_IRQ     9
+#define ARCH_TIMER_VIRT_IRQ    11
+#define ARCH_TIMER_S_EL1_IRQ   13
+#define ARCH_TIMER_NS_EL1_IRQ  14
+#define ARCH_TIMER_NS_EL2_IRQ  10
+
 enum {
     SBSA_FLASH,
     SBSA_MEM,
@@ -XXX,XX +XXX,XX @@ typedef struct {
     void *fdt;
     int fdt_size;
     int psci_conduit;
+    PFlashCFI01 *flash[2];
 } SBSAMachineState;
 
 #define TYPE_SBSA_MACHINE   MACHINE_TYPE_NAME("sbsa-ref")
@@ -XXX,XX +XXX,XX @@ static const MemMapEntry sbsa_ref_memmap[] = {
     [SBSA_MEM] =                { 0x10000000000ULL, RAMLIMIT_BYTES },
 };
 
+static const int sbsa_ref_irqmap[] = {
+    [SBSA_UART] = 1,
+    [SBSA_RTC] = 2,
+    [SBSA_PCIE] = 3, /* ... to 6 */
+    [SBSA_GPIO] = 7,
+    [SBSA_SECURE_UART] = 8,
+    [SBSA_SECURE_UART_MM] = 9,
+    [SBSA_AHCI] = 10,
+    [SBSA_EHCI] = 11,
+};
+
+/*
+ * Firmware on this machine only uses ACPI table to load OS, these limited
+ * device tree nodes are just to let firmware know the info which varies from
+ * command line parameters, so it is not necessary to be fully compatible
+ * with the kernel CPU and NUMA binding rules.
+ */
+static void create_fdt(SBSAMachineState *sms)
+{
+    void *fdt = create_device_tree(&sms->fdt_size);
+    const MachineState *ms = MACHINE(sms);
+    int cpu;
+
+    if (!fdt) {
+        error_report("create_device_tree() failed");
+        exit(1);
+    }
+
+    sms->fdt = fdt;
+
+    qemu_fdt_setprop_string(fdt, "/", "compatible", "linux,sbsa-ref");
+    qemu_fdt_setprop_cell(fdt, "/", "#address-cells", 0x2);
+    qemu_fdt_setprop_cell(fdt, "/", "#size-cells", 0x2);
+
+    if (have_numa_distance) {
+        int size = nb_numa_nodes * nb_numa_nodes * 3 * sizeof(uint32_t);
+        uint32_t *matrix = g_malloc0(size);
+        int idx, i, j;
+
+        for (i = 0; i < nb_numa_nodes; i++) {
+            for (j = 0; j < nb_numa_nodes; j++) {
+                idx = (i * nb_numa_nodes + j) * 3;
+                matrix[idx + 0] = cpu_to_be32(i);
+                matrix[idx + 1] = cpu_to_be32(j);
+                matrix[idx + 2] = cpu_to_be32(numa_info[i].distance[j]);
+            }
+        }
+
+        qemu_fdt_add_subnode(fdt, "/distance-map");
+        qemu_fdt_setprop(fdt, "/distance-map", "distance-matrix",
+                         matrix, size);
+        g_free(matrix);
+    }
+
+    qemu_fdt_add_subnode(sms->fdt, "/cpus");
+
+    for (cpu = sms->smp_cpus - 1; cpu >= 0; cpu--) {
+        char *nodename = g_strdup_printf("/cpus/cpu@%d", cpu);
+        ARMCPU *armcpu = ARM_CPU(qemu_get_cpu(cpu));
+        CPUState *cs = CPU(armcpu);
+
+        qemu_fdt_add_subnode(sms->fdt, nodename);
+
+        if (ms->possible_cpus->cpus[cs->cpu_index].props.has_node_id) {
+            qemu_fdt_setprop_cell(sms->fdt, nodename, "numa-node-id",
+                ms->possible_cpus->cpus[cs->cpu_index].props.node_id);
+        }
+
+        g_free(nodename);
+    }
+}
+
+#define SBSA_FLASH_SECTOR_SIZE (256 * KiB)
+
+static PFlashCFI01 *sbsa_flash_create1(SBSAMachineState *sms,
+                                        const char *name,
+                                        const char *alias_prop_name)
+{
+    /*
+     * Create a single flash device.  We use the same parameters as
+     * the flash devices on the Versatile Express board.
+     */
+    DeviceState *dev = qdev_create(NULL, TYPE_PFLASH_CFI01);
+
+    qdev_prop_set_uint64(dev, "sector-length", SBSA_FLASH_SECTOR_SIZE);
+    qdev_prop_set_uint8(dev, "width", 4);
+    qdev_prop_set_uint8(dev, "device-width", 2);
+    qdev_prop_set_bit(dev, "big-endian", false);
+    qdev_prop_set_uint16(dev, "id0", 0x89);
+    qdev_prop_set_uint16(dev, "id1", 0x18);
+    qdev_prop_set_uint16(dev, "id2", 0x00);
+    qdev_prop_set_uint16(dev, "id3", 0x00);
+    qdev_prop_set_string(dev, "name", name);
+    object_property_add_child(OBJECT(sms), name, OBJECT(dev),
+                              &error_abort);
+    object_property_add_alias(OBJECT(sms), alias_prop_name,
+                              OBJECT(dev), "drive", &error_abort);
+    return PFLASH_CFI01(dev);
+}
+
+static void sbsa_flash_create(SBSAMachineState *sms)
+{
+    sms->flash[0] = sbsa_flash_create1(sms, "sbsa.flash0", "pflash0");
+    sms->flash[1] = sbsa_flash_create1(sms, "sbsa.flash1", "pflash1");
+}
+
+static void sbsa_flash_map1(PFlashCFI01 *flash,
+                            hwaddr base, hwaddr size,
+                            MemoryRegion *sysmem)
+{
+    DeviceState *dev = DEVICE(flash);
+
+    assert(size % SBSA_FLASH_SECTOR_SIZE == 0);
+    assert(size / SBSA_FLASH_SECTOR_SIZE <= UINT32_MAX);
+    qdev_prop_set_uint32(dev, "num-blocks", size / SBSA_FLASH_SECTOR_SIZE);
+    qdev_init_nofail(dev);
+
+    memory_region_add_subregion(sysmem, base,
+                                sysbus_mmio_get_region(SYS_BUS_DEVICE(dev),
+                                                       0));
+}
+
+static void sbsa_flash_map(SBSAMachineState *sms,
+                           MemoryRegion *sysmem,
+                           MemoryRegion *secure_sysmem)
+{
+    /*
+     * Map two flash devices to fill the SBSA_FLASH space in the memmap.
+     * sysmem is the system memory space. secure_sysmem is the secure view
+     * of the system, and the first flash device should be made visible only
+     * there. The second flash device is visible to both secure and nonsecure.
+     * If sysmem == secure_sysmem this means there is no separate Secure
+     * address space and both flash devices are generally visible.
+     */
+    hwaddr flashsize = sbsa_ref_memmap[SBSA_FLASH].size / 2;
+    hwaddr flashbase = sbsa_ref_memmap[SBSA_FLASH].base;
+
+    sbsa_flash_map1(sms->flash[0], flashbase, flashsize,
+                    secure_sysmem);
+    sbsa_flash_map1(sms->flash[1], flashbase + flashsize, flashsize,
+                    sysmem);
+}
+
+static bool sbsa_firmware_init(SBSAMachineState *sms,
+                               MemoryRegion *sysmem,
+                               MemoryRegion *secure_sysmem)
+{
+    int i;
+    BlockBackend *pflash_blk0;
+
+    /* Map legacy -drive if=pflash to machine properties */
+    for (i = 0; i < ARRAY_SIZE(sms->flash); i++) {
+        pflash_cfi01_legacy_drive(sms->flash[i],
+                                  drive_get(IF_PFLASH, 0, i));
+    }
+
+    sbsa_flash_map(sms, sysmem, secure_sysmem);
+
+    pflash_blk0 = pflash_cfi01_get_blk(sms->flash[0]);
+
+    if (bios_name) {
+        char *fname;
+        MemoryRegion *mr;
+        int image_size;
+
+        if (pflash_blk0) {
+            error_report("The contents of the first flash device may be "
+                         "specified with -bios or with -drive if=pflash... "
+                         "but you cannot use both options at once");
+            exit(1);
+        }
+
+        /* Fall back to -bios */
+
+        fname = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
+        if (!fname) {
+            error_report("Could not find ROM image '%s'", bios_name);
+            exit(1);
+        }
+        mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(sms->flash[0]), 0);
+        image_size = load_image_mr(fname, mr);
+        g_free(fname);
+        if (image_size < 0) {
+            error_report("Could not load ROM image '%s'", bios_name);
+            exit(1);
+        }
+    }
+
+    return pflash_blk0 || bios_name;
+}
+
+static void create_secure_ram(SBSAMachineState *sms,
+                              MemoryRegion *secure_sysmem)
+{
+    MemoryRegion *secram = g_new(MemoryRegion, 1);
+    hwaddr base = sbsa_ref_memmap[SBSA_SECURE_MEM].base;
+    hwaddr size = sbsa_ref_memmap[SBSA_SECURE_MEM].size;
+
+    memory_region_init_ram(secram, NULL, "sbsa-ref.secure-ram", size,
+                           &error_fatal);
+    memory_region_add_subregion(secure_sysmem, base, secram);
+}
+
+static void create_gic(SBSAMachineState *sms, qemu_irq *pic)
+{
+    DeviceState *gicdev;
+    SysBusDevice *gicbusdev;
+    const char *gictype;
+    uint32_t redist0_capacity, redist0_count;
+    int i;
+
+    gictype = gicv3_class_name();
+
+    gicdev = qdev_create(NULL, gictype);
+    qdev_prop_set_uint32(gicdev, "revision", 3);
+    qdev_prop_set_uint32(gicdev, "num-cpu", smp_cpus);
+    /*
+     * Note that the num-irq property counts both internal and external
+     * interrupts; there are always 32 of the former (mandated by GIC spec).
+     */
+    qdev_prop_set_uint32(gicdev, "num-irq", NUM_IRQS + 32);
+    qdev_prop_set_bit(gicdev, "has-security-extensions", true);
+
+    redist0_capacity =
+                sbsa_ref_memmap[SBSA_GIC_REDIST].size / GICV3_REDIST_SIZE;
+    redist0_count = MIN(smp_cpus, redist0_capacity);
+
+    qdev_prop_set_uint32(gicdev, "len-redist-region-count", 1);
+    qdev_prop_set_uint32(gicdev, "redist-region-count[0]", redist0_count);
+
+    qdev_init_nofail(gicdev);
+    gicbusdev = SYS_BUS_DEVICE(gicdev);
+    sysbus_mmio_map(gicbusdev, 0, sbsa_ref_memmap[SBSA_GIC_DIST].base);
+    sysbus_mmio_map(gicbusdev, 1, sbsa_ref_memmap[SBSA_GIC_REDIST].base);
+
+    /*
+     * Wire the outputs from each CPU's generic timer and the GICv3
+     * maintenance interrupt signal to the appropriate GIC PPI inputs,
+     * and the GIC's IRQ/FIQ/VIRQ/VFIQ interrupt outputs to the CPU's inputs.
+     */
+    for (i = 0; i < smp_cpus; i++) {
+        DeviceState *cpudev = DEVICE(qemu_get_cpu(i));
+        int ppibase = NUM_IRQS + i * GIC_INTERNAL + GIC_NR_SGIS;
+        int irq;
+        /*
+         * Mapping from the output timer irq lines from the CPU to the
+         * GIC PPI inputs used for this board.
+         */
+        const int timer_irq[] = {
+            [GTIMER_PHYS] = ARCH_TIMER_NS_EL1_IRQ,
+            [GTIMER_VIRT] = ARCH_TIMER_VIRT_IRQ,
+            [GTIMER_HYP]  = ARCH_TIMER_NS_EL2_IRQ,
+            [GTIMER_SEC]  = ARCH_TIMER_S_EL1_IRQ,
+        };
+
+        for (irq = 0; irq < ARRAY_SIZE(timer_irq); irq++) {
+            qdev_connect_gpio_out(cpudev, irq,
+                                  qdev_get_gpio_in(gicdev,
+                                                   ppibase + timer_irq[irq]));
+        }
+
+        qdev_connect_gpio_out_named(cpudev, "gicv3-maintenance-interrupt", 0,
+                                    qdev_get_gpio_in(gicdev, ppibase
+                                                     + ARCH_GIC_MAINT_IRQ));
+        qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0,
+                                    qdev_get_gpio_in(gicdev, ppibase
+                                                     + VIRTUAL_PMU_IRQ));
+
+        sysbus_connect_irq(gicbusdev, i, qdev_get_gpio_in(cpudev, ARM_CPU_IRQ));
+        sysbus_connect_irq(gicbusdev, i + smp_cpus,
+                           qdev_get_gpio_in(cpudev, ARM_CPU_FIQ));
+        sysbus_connect_irq(gicbusdev, i + 2 * smp_cpus,
+                           qdev_get_gpio_in(cpudev, ARM_CPU_VIRQ));
+        sysbus_connect_irq(gicbusdev, i + 3 * smp_cpus,
+                           qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ));
+    }
+
+    for (i = 0; i < NUM_IRQS; i++) {
+        pic[i] = qdev_get_gpio_in(gicdev, i);
+    }
+}
+
+static void create_uart(const SBSAMachineState *sms, qemu_irq *pic, int uart,
+                        MemoryRegion *mem, Chardev *chr)
+{
+    hwaddr base = sbsa_ref_memmap[uart].base;
+    int irq = sbsa_ref_irqmap[uart];
+    DeviceState *dev = qdev_create(NULL, "pl011");
+    SysBusDevice *s = SYS_BUS_DEVICE(dev);
+
+    qdev_prop_set_chr(dev, "chardev", chr);
+    qdev_init_nofail(dev);
+    memory_region_add_subregion(mem, base,
+                                sysbus_mmio_get_region(s, 0));
+    sysbus_connect_irq(s, 0, pic[irq]);
+}
+
+static void create_rtc(const SBSAMachineState *sms, qemu_irq *pic)
+{
+    hwaddr base = sbsa_ref_memmap[SBSA_RTC].base;
+    int irq = sbsa_ref_irqmap[SBSA_RTC];
+
+    sysbus_create_simple("pl031", base, pic[irq]);
+}
+
+static DeviceState *gpio_key_dev;
+static void sbsa_ref_powerdown_req(Notifier *n, void *opaque)
+{
+    /* use gpio Pin 3 for power button event */
+    qemu_set_irq(qdev_get_gpio_in(gpio_key_dev, 0), 1);
+}
+
+static Notifier sbsa_ref_powerdown_notifier = {
+    .notify = sbsa_ref_powerdown_req
+};
+
+static void create_gpio(const SBSAMachineState *sms, qemu_irq *pic)
+{
+    DeviceState *pl061_dev;
+    hwaddr base = sbsa_ref_memmap[SBSA_GPIO].base;
+    int irq = sbsa_ref_irqmap[SBSA_GPIO];
+
+    pl061_dev = sysbus_create_simple("pl061", base, pic[irq]);
+
+    gpio_key_dev = sysbus_create_simple("gpio-key", -1,
+                                        qdev_get_gpio_in(pl061_dev, 3));
+
+    /* connect powerdown request */
+    qemu_register_powerdown_notifier(&sbsa_ref_powerdown_notifier);
+}
+
+static void create_ahci(const SBSAMachineState *sms, qemu_irq *pic)
+{
+    hwaddr base = sbsa_ref_memmap[SBSA_AHCI].base;
+    int irq = sbsa_ref_irqmap[SBSA_AHCI];
+    DeviceState *dev;
+    DriveInfo *hd[NUM_SATA_PORTS];
+    SysbusAHCIState *sysahci;
+    AHCIState *ahci;
+    int i;
+
+    dev = qdev_create(NULL, "sysbus-ahci");
+    qdev_prop_set_uint32(dev, "num-ports", NUM_SATA_PORTS);
+    qdev_init_nofail(dev);
+    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base);
+    sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[irq]);
+
+    sysahci = SYSBUS_AHCI(dev);
+    ahci = &sysahci->ahci;
+    ide_drive_get(hd, ARRAY_SIZE(hd));
+    for (i = 0; i < ahci->ports; i++) {
+        if (hd[i] == NULL) {
+            continue;
+        }
+        ide_create_drive(&ahci->dev[i].port, 0, hd[i]);
+    }
+}
+
+static void create_ehci(const SBSAMachineState *sms, qemu_irq *pic)
+{
+    hwaddr base = sbsa_ref_memmap[SBSA_EHCI].base;
+    int irq = sbsa_ref_irqmap[SBSA_EHCI];
+
+    sysbus_create_simple("platform-ehci-usb", base, pic[irq]);
+}
+
+static void create_smmu(const SBSAMachineState *sms, qemu_irq *pic,
+                        PCIBus *bus)
+{
+    hwaddr base = sbsa_ref_memmap[SBSA_SMMU].base;
+    int irq =  sbsa_ref_irqmap[SBSA_SMMU];
+    DeviceState *dev;
+    int i;
+
+    dev = qdev_create(NULL, "arm-smmuv3");
+
+    object_property_set_link(OBJECT(dev), OBJECT(bus), "primary-bus",
+                             &error_abort);
+    qdev_init_nofail(dev);
+    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base);
+    for (i = 0; i < NUM_SMMU_IRQS; i++) {
+        sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, pic[irq + i]);
+    }
+}
+
+static void create_pcie(SBSAMachineState *sms, qemu_irq *pic)
+{
+    hwaddr base_ecam = sbsa_ref_memmap[SBSA_PCIE_ECAM].base;
+    hwaddr size_ecam = sbsa_ref_memmap[SBSA_PCIE_ECAM].size;
+    hwaddr base_mmio = sbsa_ref_memmap[SBSA_PCIE_MMIO].base;
+    hwaddr size_mmio = sbsa_ref_memmap[SBSA_PCIE_MMIO].size;
+    hwaddr base_mmio_high = sbsa_ref_memmap[SBSA_PCIE_MMIO_HIGH].base;
+    hwaddr size_mmio_high = sbsa_ref_memmap[SBSA_PCIE_MMIO_HIGH].size;
+    hwaddr base_pio = sbsa_ref_memmap[SBSA_PCIE_PIO].base;
+    int irq = sbsa_ref_irqmap[SBSA_PCIE];
+    MemoryRegion *mmio_alias, *mmio_alias_high, *mmio_reg;
+    MemoryRegion *ecam_alias, *ecam_reg;
+    DeviceState *dev;
+    PCIHostState *pci;
+    int i;
+
+    dev = qdev_create(NULL, TYPE_GPEX_HOST);
+    qdev_init_nofail(dev);
+
+    /* Map ECAM space */
+    ecam_alias = g_new0(MemoryRegion, 1);
+    ecam_reg = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 0);
+    memory_region_init_alias(ecam_alias, OBJECT(dev), "pcie-ecam",
+                             ecam_reg, 0, size_ecam);
+    memory_region_add_subregion(get_system_memory(), base_ecam, ecam_alias);
+
+    /* Map the MMIO space */
+    mmio_alias = g_new0(MemoryRegion, 1);
+    mmio_reg = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 1);
+    memory_region_init_alias(mmio_alias, OBJECT(dev), "pcie-mmio",
+                             mmio_reg, base_mmio, size_mmio);
+    memory_region_add_subregion(get_system_memory(), base_mmio, mmio_alias);
+
+    /* Map the MMIO_HIGH space */
+    mmio_alias_high = g_new0(MemoryRegion, 1);
+    memory_region_init_alias(mmio_alias_high, OBJECT(dev), "pcie-mmio-high",
+                             mmio_reg, base_mmio_high, size_mmio_high);
+    memory_region_add_subregion(get_system_memory(), base_mmio_high,
+                                mmio_alias_high);
+
+    /* Map IO port space */
+    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 2, base_pio);
+
+    for (i = 0; i < GPEX_NUM_IRQS; i++) {
+        sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, pic[irq + i]);
+        gpex_set_irq_num(GPEX_HOST(dev), i, irq + i);
+    }
+
+    pci = PCI_HOST_BRIDGE(dev);
+    if (pci->bus) {
+        for (i = 0; i < nb_nics; i++) {
+            NICInfo *nd = &nd_table[i];
+
+            if (!nd->model) {
+                nd->model = g_strdup("e1000e");
+            }
+
+            pci_nic_init_nofail(nd, pci->bus, nd->model, NULL);
+        }
+    }
+
+    pci_create_simple(pci->bus, -1, "VGA");
+
+    create_smmu(sms, pic, pci->bus);
+}
+
+static void *sbsa_ref_dtb(const struct arm_boot_info *binfo, int *fdt_size)
+{
+    const SBSAMachineState *board = container_of(binfo, SBSAMachineState,
+                                                 bootinfo);
+
+    *fdt_size = board->fdt_size;
+    return board->fdt;
+}
+
 static void sbsa_ref_init(MachineState *machine)
 {
     SBSAMachineState *sms = SBSA_MACHINE(machine);
@@ -XXX,XX +XXX,XX @@ static void sbsa_ref_init(MachineState *machine)
     MemoryRegion *sysmem = get_system_memory();
     MemoryRegion *secure_sysmem = NULL;
     MemoryRegion *ram = g_new(MemoryRegion, 1);
+    bool firmware_loaded;
     const CPUArchIdList *possible_cpus;
     int n, sbsa_max_cpus;
+    qemu_irq pic[NUM_IRQS];
 
     if (strcmp(machine->cpu_type, ARM_CPU_TYPE_NAME("cortex-a57"))) {
         error_report("sbsa-ref: CPU type other than the built-in "
@@ -XXX,XX +XXX,XX @@ static void sbsa_ref_init(MachineState *machine)
         exit(1);
     }
 
+    /*
+     * The Secure view of the world is the same as the NonSecure,
+     * but with a few extra devices. Create it as a container region
+     * containing the system memory at low priority; any secure-only
+     * devices go in at higher priority and take precedence.
+     */
+    secure_sysmem = g_new(MemoryRegion, 1);
+    memory_region_init(secure_sysmem, OBJECT(machine), "secure-memory",
+                       UINT64_MAX);
+    memory_region_add_subregion_overlap(secure_sysmem, 0, sysmem, -1);
+
+    firmware_loaded = sbsa_firmware_init(sms, sysmem,
+                                         secure_sysmem ?: sysmem);
+
+    if (machine->kernel_filename && firmware_loaded) {
+        error_report("sbsa-ref: No fw_cfg device on this machine, "
+                     "so -kernel option is not supported when firmware loaded, "
+                     "please load OS from hard disk instead");
+        exit(1);
+    }
+
     /*
      * This machine has EL3 enabled, external firmware should supply PSCI
      * implementation, so the QEMU's internal PSCI is disabled.
@@ -XXX,XX +XXX,XX @@ static void sbsa_ref_init(MachineState *machine)
                                          machine->ram_size);
     memory_region_add_subregion(sysmem, sbsa_ref_memmap[SBSA_MEM].base, ram);
 
+    create_fdt(sms);
+
+    create_secure_ram(sms, secure_sysmem);
+
+    create_gic(sms, pic);
+
+    create_uart(sms, pic, SBSA_UART, sysmem, serial_hd(0));
+    create_uart(sms, pic, SBSA_SECURE_UART, secure_sysmem, serial_hd(1));
+    /* Second secure UART for RAS and MM from EL0 */
+    create_uart(sms, pic, SBSA_SECURE_UART_MM, secure_sysmem, serial_hd(2));
+
+    create_rtc(sms, pic);
+
+    create_gpio(sms, pic);
+
+    create_ahci(sms, pic);
+
+    create_ehci(sms, pic);
+
+    create_pcie(sms, pic);
+
     sms->bootinfo.ram_size = machine->ram_size;
     sms->bootinfo.kernel_filename = machine->kernel_filename;
     sms->bootinfo.nb_cpus = smp_cpus;
     sms->bootinfo.board_id = -1;
     sms->bootinfo.loader_start = sbsa_ref_memmap[SBSA_MEM].base;
+    sms->bootinfo.get_dtb = sbsa_ref_dtb;
+    sms->bootinfo.firmware_loaded = firmware_loaded;
     arm_load_kernel(ARM_CPU(first_cpu), &sms->bootinfo);
 }
 
@@ -XXX,XX +XXX,XX @@ sbsa_ref_get_default_cpu_node_id(const MachineState *ms, int idx)
     return idx % nb_numa_nodes;
 }
 
+static void sbsa_ref_instance_init(Object *obj)
+{
+    SBSAMachineState *sms = SBSA_MACHINE(obj);
+
+    sbsa_flash_create(sms);
+}
+
 static void sbsa_ref_class_init(ObjectClass *oc, void *data)
 {
     MachineClass *mc = MACHINE_CLASS(oc);
@@ -XXX,XX +XXX,XX @@ static void sbsa_ref_class_init(ObjectClass *oc, void *data)
 static const TypeInfo sbsa_ref_info = {
     .name          = TYPE_SBSA_MACHINE,
     .parent        = TYPE_MACHINE,
+    .instance_init = sbsa_ref_instance_init,
     .class_init    = sbsa_ref_class_init,
     .instance_size = sizeof(SBSAMachineState),
 };
-- 
2.20.1

From: Philippe Mathieu-Daudé <philmd@redhat.com>

Group Aarch64 rules together, TCG related ones at the bottom.
This will help when restricting TCG-only objects.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190701132516.26392-2-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/Makefile.objs | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/target/arm/Makefile.objs b/target/arm/Makefile.objs
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/Makefile.objs
+++ b/target/arm/Makefile.objs
@@ -XXX,XX +XXX,XX @@ obj-$(call lnot,$(CONFIG_KVM)) += kvm-stub.o
 obj-y += translate.o op_helper.o helper.o cpu.o
 obj-y += neon_helper.o iwmmxt_helper.o vec_helper.o vfp_helper.o
 obj-y += gdbstub.o
-obj-$(TARGET_AARCH64) += cpu64.o translate-a64.o helper-a64.o gdbstub64.o
-obj-$(TARGET_AARCH64) += pauth_helper.o
+obj-$(TARGET_AARCH64) += cpu64.o gdbstub64.o
 obj-y += crypto_helper.o
 obj-$(CONFIG_SOFTMMU) += arm-powerctl.o
 
@@ -XXX,XX +XXX,XX @@ target/arm/translate-sve.o: target/arm/decode-sve.inc.c
 target/arm/translate.o: target/arm/decode-vfp.inc.c
 target/arm/translate.o: target/arm/decode-vfp-uncond.inc.c
 
+obj-$(TARGET_AARCH64) += translate-a64.o helper-a64.o
 obj-$(TARGET_AARCH64) += translate-sve.o sve_helper.o
+obj-$(TARGET_AARCH64) += pauth_helper.o
-- 
2.20.1

From: Philippe Mathieu-Daudé <philmd@redhat.com>

Group ARM objects together, TCG related ones at the bottom.
This will help when restricting TCG-only objects.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190701132516.26392-3-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/Makefile.objs | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/target/arm/Makefile.objs b/target/arm/Makefile.objs
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/Makefile.objs
+++ b/target/arm/Makefile.objs
@@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_KVM) += kvm.o
 obj-$(call land,$(CONFIG_KVM),$(call lnot,$(TARGET_AARCH64))) += kvm32.o
 obj-$(call land,$(CONFIG_KVM),$(TARGET_AARCH64)) += kvm64.o
 obj-$(call lnot,$(CONFIG_KVM)) += kvm-stub.o
-obj-y += translate.o op_helper.o helper.o cpu.o
-obj-y += neon_helper.o iwmmxt_helper.o vec_helper.o vfp_helper.o
-obj-y += gdbstub.o
+obj-y += helper.o vfp_helper.o
+obj-y += cpu.o gdbstub.o
 obj-$(TARGET_AARCH64) += cpu64.o gdbstub64.o
-obj-y += crypto_helper.o
 obj-$(CONFIG_SOFTMMU) += arm-powerctl.o
 
 DECODETREE = $(SRC_PATH)/scripts/decodetree.py
@@ -XXX,XX +XXX,XX @@ target/arm/translate-sve.o: target/arm/decode-sve.inc.c
 target/arm/translate.o: target/arm/decode-vfp.inc.c
 target/arm/translate.o: target/arm/decode-vfp-uncond.inc.c
 
+obj-y += translate.o op_helper.o
+obj-y += crypto_helper.o
+obj-y += iwmmxt_helper.o vec_helper.o neon_helper.o
+
 obj-$(TARGET_AARCH64) += translate-a64.o helper-a64.o
 obj-$(TARGET_AARCH64) += translate-sve.o sve_helper.o
 obj-$(TARGET_AARCH64) += pauth_helper.o
-- 
2.20.1

From: Philippe Mathieu-Daudé <philmd@redhat.com>

Group KVM rules together.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190701132516.26392-4-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/Makefile.objs | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/target/arm/Makefile.objs b/target/arm/Makefile.objs
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/Makefile.objs
+++ b/target/arm/Makefile.objs
@@ -XXX,XX +XXX,XX @@
 obj-y += arm-semi.o
 obj-$(CONFIG_SOFTMMU) += machine.o psci.o arch_dump.o monitor.o
-obj-$(CONFIG_KVM) += kvm.o
-obj-$(call land,$(CONFIG_KVM),$(call lnot,$(TARGET_AARCH64))) += kvm32.o
-obj-$(call land,$(CONFIG_KVM),$(TARGET_AARCH64)) += kvm64.o
-obj-$(call lnot,$(CONFIG_KVM)) += kvm-stub.o
 obj-y += helper.o vfp_helper.o
 obj-y += cpu.o gdbstub.o
 obj-$(TARGET_AARCH64) += cpu64.o gdbstub64.o
 obj-$(CONFIG_SOFTMMU) += arm-powerctl.o
 
+obj-$(CONFIG_KVM) += kvm.o
+obj-$(call land,$(CONFIG_KVM),$(call lnot,$(TARGET_AARCH64))) += kvm32.o
+obj-$(call land,$(CONFIG_KVM),$(TARGET_AARCH64)) += kvm64.o
+obj-$(call lnot,$(CONFIG_KVM)) += kvm-stub.o
+
 DECODETREE = $(SRC_PATH)/scripts/decodetree.py
 
 target/arm/decode-sve.inc.c: $(SRC_PATH)/target/arm/sve.decode $(DECODETREE)
-- 
2.20.1

From: Philippe Mathieu-Daudé <philmd@redhat.com>

Group SOFTMMU objects together.
Since PSCI is TCG specific, keep it separate.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190701132516.26392-5-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/Makefile.objs | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/target/arm/Makefile.objs b/target/arm/Makefile.objs
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/Makefile.objs
+++ b/target/arm/Makefile.objs
@@ -XXX,XX +XXX,XX @@
 obj-y += arm-semi.o
-obj-$(CONFIG_SOFTMMU) += machine.o psci.o arch_dump.o monitor.o
 obj-y += helper.o vfp_helper.o
 obj-y += cpu.o gdbstub.o
 obj-$(TARGET_AARCH64) += cpu64.o gdbstub64.o
+
+obj-$(CONFIG_SOFTMMU) += machine.o arch_dump.o monitor.o
 obj-$(CONFIG_SOFTMMU) += arm-powerctl.o
 
 obj-$(CONFIG_KVM) += kvm.o
@@ -XXX,XX +XXX,XX @@ obj-y += translate.o op_helper.o
 obj-y += crypto_helper.o
 obj-y += iwmmxt_helper.o vec_helper.o neon_helper.o
 
+obj-$(CONFIG_SOFTMMU) += psci.o
+
 obj-$(TARGET_AARCH64) += translate-a64.o helper-a64.o
 obj-$(TARGET_AARCH64) += translate-sve.o sve_helper.o
 obj-$(TARGET_AARCH64) += pauth_helper.o
-- 
2.20.1

From: Philippe Mathieu-Daudé <philmd@redhat.com>

Since commit 8c06fbdf36b checkpatch.pl enforce a new multiline
comment syntax. Since we'll move this code around, fix its style
first.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190701132516.26392-8-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/helper.c     | 237 ++++++++++++++++++++++++++--------------
 target/arm/op_helper.c  |  54 ++++++---
 target/arm/vfp_helper.c |   3 +-
 3 files changed, 196 insertions(+), 98 deletions(-)

diff --git a/target/arm/helper.c b/target/arm/helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlldm)(CPUARMState *env, uint32_t fptr)
 
 uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op)
 {
-    /* The TT instructions can be used by unprivileged code, but in
+    /*
+     * The TT instructions can be used by unprivileged code, but in
      * user-only emulation we don't have the MPU.
      * Luckily since we know we are NonSecure unprivileged (and that in
      * turn means that the A flag wasn't specified), all the bits in the
@@ -XXX,XX +XXX,XX @@ static bool v7m_stack_write(ARMCPU *cpu, uint32_t addr, uint32_t value,
     return true;
 
 pend_fault:
-    /* By pending the exception at this point we are making
+    /*
+     * By pending the exception at this point we are making
      * the IMPDEF choice "overridden exceptions pended" (see the
      * MergeExcInfo() pseudocode). The other choice would be to not
      * pend them now and then make a choice about which to throw away
@@ -XXX,XX +XXX,XX @@ static bool v7m_stack_read(ARMCPU *cpu, uint32_t *dest, uint32_t addr,
     return true;
 
 pend_fault:
-    /* By pending the exception at this point we are making
+    /*
+     * By pending the exception at this point we are making
      * the IMPDEF choice "overridden exceptions pended" (see the
      * MergeExcInfo() pseudocode). The other choice would be to not
      * pend them now and then make a choice about which to throw away
@@ -XXX,XX +XXX,XX @@ void HELPER(v7m_preserve_fp_state)(CPUARMState *env)
      */
 }
 
-/* Write to v7M CONTROL.SPSEL bit for the specified security bank.
+/*
+ * Write to v7M CONTROL.SPSEL bit for the specified security bank.
  * This may change the current stack pointer between Main and Process
  * stack pointers if it is done for the CONTROL register for the current
  * security state.
@@ -XXX,XX +XXX,XX @@ static void write_v7m_control_spsel_for_secstate(CPUARMState *env,
     }
 }
 
-/* Write to v7M CONTROL.SPSEL bit. This may change the current
+/*
+ * Write to v7M CONTROL.SPSEL bit. This may change the current
  * stack pointer between Main and Process stack pointers.
  */
 static void write_v7m_control_spsel(CPUARMState *env, bool new_spsel)
@@ -XXX,XX +XXX,XX @@ static void write_v7m_control_spsel(CPUARMState *env, bool new_spsel)
 
 void write_v7m_exception(CPUARMState *env, uint32_t new_exc)
 {
-    /* Write a new value to v7m.exception, thus transitioning into or out
+    /*
+     * Write a new value to v7m.exception, thus transitioning into or out
      * of Handler mode; this may result in a change of active stack pointer.
      */
     bool new_is_psp, old_is_psp = v7m_using_psp(env);
@@ -XXX,XX +XXX,XX @@ static void switch_v7m_security_state(CPUARMState *env, bool new_secstate)
         return;
     }
 
-    /* All the banked state is accessed by looking at env->v7m.secure
+    /*
+     * All the banked state is accessed by looking at env->v7m.secure
      * except for the stack pointer; rearrange the SP appropriately.
      */
     new_ss_msp = env->v7m.other_ss_msp;
@@ -XXX,XX +XXX,XX @@ static void switch_v7m_security_state(CPUARMState *env, bool new_secstate)
 
 void HELPER(v7m_bxns)(CPUARMState *env, uint32_t dest)
 {
-    /* Handle v7M BXNS:
+    /*
+     * Handle v7M BXNS:
      *  - if the return value is a magic value, do exception return (like BX)
      *  - otherwise bit 0 of the return value is the target security state
      */
@@ -XXX,XX +XXX,XX @@ void HELPER(v7m_bxns)(CPUARMState *env, uint32_t dest)
     }
 
     if (dest >= min_magic) {
-        /* This is an exception return magic value; put it where
+        /*
+         * This is an exception return magic value; put it where
          * do_v7m_exception_exit() expects and raise EXCEPTION_EXIT.
          * Note that if we ever add gen_ss_advance() singlestep support to
          * M profile this should count as an "instruction execution complete"
@@ -XXX,XX +XXX,XX @@ void HELPER(v7m_bxns)(CPUARMState *env, uint32_t dest)
 
 void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest)
 {
-    /* Handle v7M BLXNS:
+    /*
+     * Handle v7M BLXNS:
      *  - bit 0 of the destination address is the target security state
      */
 
@@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest)
     assert(env->v7m.secure);
 
     if (dest & 1) {
-        /* target is Secure, so this is just a normal BLX,
+        /*
+         * Target is Secure, so this is just a normal BLX,
          * except that the low bit doesn't indicate Thumb/not.
          */
         env->regs[14] = nextinst;
@@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest)
     env->regs[13] = sp;
     env->regs[14] = 0xfeffffff;
     if (arm_v7m_is_handler_mode(env)) {
-        /* Write a dummy value to IPSR, to avoid leaking the current secure
+        /*
+         * Write a dummy value to IPSR, to avoid leaking the current secure
          * exception number to non-secure code. This is guaranteed not
          * to cause write_v7m_exception() to actually change stacks.
          */
@@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest)
 static uint32_t *get_v7m_sp_ptr(CPUARMState *env, bool secure, bool threadmode,
                                 bool spsel)
 {
-    /* Return a pointer to the location where we currently store the
+    /*
+     * Return a pointer to the location where we currently store the
      * stack pointer for the requested security state and thread mode.
      * This pointer will become invalid if the CPU state is updated
      * such that the stack pointers are switched around (eg changing
@@ -XXX,XX +XXX,XX @@ static bool arm_v7m_load_vector(ARMCPU *cpu, int exc, bool targets_secure,
 
     mmu_idx = arm_v7m_mmu_idx_for_secstate_and_priv(env, targets_secure, true);
 
-    /* We don't do a get_phys_addr() here because the rules for vector
+    /*
+     * We don't do a get_phys_addr() here because the rules for vector
      * loads are special: they always use the default memory map, and
      * the default memory map permits reads from all addresses.
      * Since there's no easy way to pass through to pmsav8_mpu_lookup()
@@ -XXX,XX +XXX,XX @@ static bool arm_v7m_load_vector(ARMCPU *cpu, int exc, bool targets_secure,
     return true;
 
 load_fail:
-    /* All vector table fetch fails are reported as HardFault, with
+    /*
+     * All vector table fetch fails are reported as HardFault, with
      * HFSR.VECTTBL and .FORCED set. (FORCED is set because
      * technically the underlying exception is a MemManage or BusFault
      * that is escalated to HardFault.) This is a terminal exception,
@@ -XXX,XX +XXX,XX @@ static uint32_t v7m_integrity_sig(CPUARMState *env, uint32_t lr)
 static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain,
                                   bool ignore_faults)
 {
-    /* For v8M, push the callee-saves register part of the stack frame.
+    /*
+     * For v8M, push the callee-saves register part of the stack frame.
      * Compare the v8M pseudocode PushCalleeStack().
      * In the tailchaining case this may not be the current stack.
      */
@@ -XXX,XX +XXX,XX @@ static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain,
         return true;
     }
 
-    /* Write as much of the stack frame as we can. A write failure may
+    /*
+     * Write as much of the stack frame as we can. A write failure may
      * cause us to pend a derived exception.
      */
     sig = v7m_integrity_sig(env, lr);
@@ -XXX,XX +XXX,XX @@ static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain,
 static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain,
                                 bool ignore_stackfaults)
 {
-    /* Do the "take the exception" parts of exception entry,
+    /*
+     * Do the "take the exception" parts of exception entry,
      * but not the pushing of state to the stack. This is
      * similar to the pseudocode ExceptionTaken() function.
      */
@@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain,
     if (arm_feature(env, ARM_FEATURE_V8)) {
         if (arm_feature(env, ARM_FEATURE_M_SECURITY) &&
             (lr & R_V7M_EXCRET_S_MASK)) {
-            /* The background code (the owner of the registers in the
+            /*
+             * The background code (the owner of the registers in the
              * exception frame) is Secure. This means it may either already
              * have or now needs to push callee-saves registers.
              */
             if (targets_secure) {
                 if (dotailchain && !(lr & R_V7M_EXCRET_ES_MASK)) {
-                    /* We took an exception from Secure to NonSecure
+                    /*
+                     * We took an exception from Secure to NonSecure
                      * (which means the callee-saved registers got stacked)
                      * and are now tailchaining to a Secure exception.
                      * Clear DCRS so eventual return from this Secure
@@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain,
                     lr &= ~R_V7M_EXCRET_DCRS_MASK;
                 }
             } else {
-                /* We're going to a non-secure exception; push the
+                /*
+                 * We're going to a non-secure exception; push the
                  * callee-saves registers to the stack now, if they're
                  * not already saved.
                  */
@@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain,
             lr |= R_V7M_EXCRET_SPSEL_MASK;
         }
 
-        /* Clear registers if necessary to prevent non-secure exception
+        /*
+         * Clear registers if necessary to prevent non-secure exception
          * code being able to see register values from secure code.
          * Where register values become architecturally UNKNOWN we leave
          * them with their previous values.
          */
         if (arm_feature(env, ARM_FEATURE_M_SECURITY)) {
             if (!targets_secure) {
-                /* Always clear the caller-saved registers (they have been
+                /*
+                 * Always clear the caller-saved registers (they have been
                  * pushed to the stack earlier in v7m_push_stack()).
                  * Clear callee-saved registers if the background code is
                  * Secure (in which case these regs were saved in
@@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain,
     }
 
     if (push_failed && !ignore_stackfaults) {
-        /* Derived exception on callee-saves register stacking:
+        /*
+         * Derived exception on callee-saves register stacking:
          * we might now want to take a different exception which
          * targets a different security state, so try again from the top.
          */
@@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain,
         return;
     }
 
-    /* Now we've done everything that might cause a derived exception
+    /*
+     * Now we've done everything that might cause a derived exception
      * we can go ahead and activate whichever exception we're going to
      * take (which might now be the derived exception).
      */
@@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlldm)(CPUARMState *env, uint32_t fptr)
 
 static bool v7m_push_stack(ARMCPU *cpu)
 {
-    /* Do the "set up stack frame" part of exception entry,
+    /*
+     * Do the "set up stack frame" part of exception entry,
      * similar to pseudocode PushStack().
      * Return true if we generate a derived exception (and so
      * should ignore further stack faults trying to process
@@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu)
         }
     }
 
-    /* Write as much of the stack frame as we can. If we fail a stack
+    /*
+     * Write as much of the stack frame as we can. If we fail a stack
      * write this will result in a derived exception being pended
      * (which may be taken in preference to the one we started with
      * if it has higher priority).
@@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu)
     bool ftype;
     bool restore_s16_s31;
 
-    /* If we're not in Handler mode then jumps to magic exception-exit
+    /*
+     * If we're not in Handler mode then jumps to magic exception-exit
      * addresses don't have magic behaviour. However for the v8M
      * security extensions the magic secure-function-return has to
      * work in thread mode too, so to avoid doing an extra check in
@@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu)
         return;
     }
 
-    /* In the spec pseudocode ExceptionReturn() is called directly
+    /*
+     * In the spec pseudocode ExceptionReturn() is called directly
      * from BXWritePC() and gets the full target PC value including
      * bit zero. In QEMU's implementation we treat it as a normal
      * jump-to-register (which is then caught later on), and so split
@@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu)
     }
 
     if (arm_feature(env, ARM_FEATURE_M_SECURITY)) {
-        /* EXC_RETURN.ES validation check (R_SMFL). We must do this before
+        /*
+         * EXC_RETURN.ES validation check (R_SMFL). We must do this before
          * we pick which FAULTMASK to clear.
          */
         if (!env->v7m.secure &&
@@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu)
     }
 
     if (env->v7m.exception != ARMV7M_EXCP_NMI) {
-        /* Auto-clear FAULTMASK on return from other than NMI.
+        /*
+         * Auto-clear FAULTMASK on return from other than NMI.
          * If the security extension is implemented then this only
          * happens if the raw execution priority is >= 0; the
          * value of the ES bit in the exception return value indicates
@@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu)
         /* still an irq active now */
         break;
     case 1:
-        /* we returned to base exception level, no nesting.
+        /*
+         * We returned to base exception level, no nesting.
          * (In the pseudocode this is written using "NestedActivation != 1"
          * where we have 'rettobase == false'.)
          */
@@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu)
 
     if (arm_feature(env, ARM_FEATURE_V8)) {
         if (!arm_feature(env, ARM_FEATURE_M_SECURITY)) {
-            /* UNPREDICTABLE if S == 1 or DCRS == 0 or ES == 1 (R_XLCP);
+            /*
+             * UNPREDICTABLE if S == 1 or DCRS == 0 or ES == 1 (R_XLCP);
              * we choose to take the UsageFault.
              */
             if ((excret & R_V7M_EXCRET_S_MASK) ||
@@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu)
             break;
         case 13: /* Return to Thread using Process stack */
         case 9: /* Return to Thread using Main stack */
-            /* We only need to check NONBASETHRDENA for v7M, because in
+            /*
+             * We only need to check NONBASETHRDENA for v7M, because in
              * v8M this bit does not exist (it is RES1).
              */
             if (!rettobase &&
@@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu)
     }
 
     if (ufault) {
-        /* Bad exception return: instead of popping the exception
+        /*
+         * Bad exception return: instead of popping the exception
          * stack, directly take a usage fault on the current stack.
          */
         env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_INVPC_MASK;
@@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu)
     switch_v7m_security_state(env, return_to_secure);
 
     {
-        /* The stack pointer we should be reading the exception frame from
+        /*
+         * The stack pointer we should be reading the exception frame from
          * depends on bits in the magic exception return type value (and
          * for v8M isn't necessarily the stack pointer we will eventually
          * end up resuming execution with). Get a pointer to the location
@@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu)
             v7m_stack_read(cpu, &xpsr, frameptr + 0x1c, mmu_idx);
 
         if (!pop_ok) {
-            /* v7m_stack_read() pended a fault, so take it (as a tail
+            /*
+             * v7m_stack_read() pended a fault, so take it (as a tail
              * chained exception on the same stack frame)
              */
             qemu_log_mask(CPU_LOG_INT, "...derived exception on unstacking\n");
@@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu)
             return;
         }
 
-        /* Returning from an exception with a PC with bit 0 set is defined
+        /*
+         * Returning from an exception with a PC with bit 0 set is defined
          * behaviour on v8M (bit 0 is ignored), but for v7M it was specified
          * to be UNPREDICTABLE. In practice actual v7M hardware seems to ignore
          * the lsbit, and there are several RTOSes out there which incorrectly
@@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu)
         }
 
         if (arm_feature(env, ARM_FEATURE_V8)) {
-            /* For v8M we have to check whether the xPSR exception field
+            /*
+             * For v8M we have to check whether the xPSR exception field
              * matches the EXCRET value for return to handler/thread
              * before we commit to changing the SP and xPSR.
              */
             bool will_be_handler = (xpsr & XPSR_EXCP) != 0;
             if (return_to_handler != will_be_handler) {
-                /* Take an INVPC UsageFault on the current stack.
+                /*
+                 * Take an INVPC UsageFault on the current stack.
                  * By this point we will have switched to the security state
                  * for the background state, so this UsageFault will target
                  * that state.
@@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu)
                 frameptr += 0x40;
             }
         }
-        /* Undo stack alignment (the SPREALIGN bit indicates that the original
+        /*
+         * Undo stack alignment (the SPREALIGN bit indicates that the original
          * pre-exception SP was not 8-aligned and we added a padding word to
          * align it, so we undo this by ORing in the bit that increases it
          * from the current 8-aligned value to the 8-unaligned value. (Adding 4
@@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu)
                                                V7M_CONTROL, SFPA, sfpa);
     }
 
-    /* The restored xPSR exception field will be zero if we're
+    /*
+     * The restored xPSR exception field will be zero if we're
      * resuming in Thread mode. If that doesn't match what the
      * exception return excret specified then this is a UsageFault.
      * v7M requires we make this check here; v8M did it earlier.
      */
     if (return_to_handler != arm_v7m_is_handler_mode(env)) {
-        /* Take an INVPC UsageFault by pushing the stack again;
+        /*
+         * Take an INVPC UsageFault by pushing the stack again;
          * we know we're v7M so this is never a Secure UsageFault.
          */
         bool ignore_stackfaults;
@@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu)
 
 static bool do_v7m_function_return(ARMCPU *cpu)
 {
-    /* v8M security extensions magic function return.
+    /*
+     * v8M security extensions magic function return.
      * We may either:
      *  (1) throw an exception (longjump)
      *  (2) return true if we successfully handled the function return
@@ -XXX,XX +XXX,XX @@ static bool do_v7m_function_return(ARMCPU *cpu)
         frame_sp_p = get_v7m_sp_ptr(env, true, threadmode, spsel);
         frameptr = *frame_sp_p;
 
-        /* These loads may throw an exception (for MPU faults). We want to
+        /*
+         * These loads may throw an exception (for MPU faults). We want to
          * do them as secure, so work out what MMU index that is.
          */
         mmu_idx = arm_v7m_mmu_idx_for_secstate(env, true);
@@ -XXX,XX +XXX,XX @@ static void arm_log_exception(int idx)
 static bool v7m_read_half_insn(ARMCPU *cpu, ARMMMUIdx mmu_idx,
                                uint32_t addr, uint16_t *insn)
 {
-    /* Load a 16-bit portion of a v7M instruction, returning true on success,
+    /*
+     * Load a 16-bit portion of a v7M instruction, returning true on success,
      * or false on failure (in which case we will have pended the appropriate
      * exception).
      * We need to do the instruction fetch's MPU and SAU checks
@@ -XXX,XX +XXX,XX @@ static bool v7m_read_half_insn(ARMCPU *cpu, ARMMMUIdx mmu_idx,
 
     v8m_security_lookup(env, addr, MMU_INST_FETCH, mmu_idx, &sattrs);
     if (!sattrs.nsc || sattrs.ns) {
-        /* This must be the second half of the insn, and it straddles a
+        /*
+         * This must be the second half of the insn, and it straddles a
          * region boundary with the second half not being S&NSC.
          */
         env->v7m.sfsr |= R_V7M_SFSR_INVEP_MASK;
@@ -XXX,XX +XXX,XX @@ static bool v7m_read_half_insn(ARMCPU *cpu, ARMMMUIdx mmu_idx,
 
 static bool v7m_handle_execute_nsc(ARMCPU *cpu)
 {
-    /* Check whether this attempt to execute code in a Secure & NS-Callable
+    /*
+     * Check whether this attempt to execute code in a Secure & NS-Callable
      * memory region is for an SG instruction; if so, then emulate the
      * effect of the SG instruction and return true. Otherwise pend
      * the correct kind of exception and return false.
@@ -XXX,XX +XXX,XX @@ static bool v7m_handle_execute_nsc(ARMCPU *cpu)
     ARMMMUIdx mmu_idx;
     uint16_t insn;
 
-    /* We should never get here unless get_phys_addr_pmsav8() caused
+    /*
+     * We should never get here unless get_phys_addr_pmsav8() caused
      * an exception for NS executing in S&NSC memory.
      */
     assert(!env->v7m.secure);
@@ -XXX,XX +XXX,XX @@ static bool v7m_handle_execute_nsc(ARMCPU *cpu)
     }
 
     if (insn != 0xe97f) {
-        /* Not an SG instruction first half (we choose the IMPDEF
+        /*
+         * Not an SG instruction first half (we choose the IMPDEF
          * early-SG-check option).
          */
         goto gen_invep;
@@ -XXX,XX +XXX,XX @@ static bool v7m_handle_execute_nsc(ARMCPU *cpu)
     }
 
     if (insn != 0xe97f) {
-        /* Not an SG instruction second half (yes, both halves of the SG
+        /*
+         * Not an SG instruction second half (yes, both halves of the SG
          * insn have the same hex value)
          */
         goto gen_invep;
     }
 
-    /* OK, we have confirmed that we really have an SG instruction.
+    /*
+     * OK, we have confirmed that we really have an SG instruction.
      * We know we're NS in S memory so don't need to repeat those checks.
      */
     qemu_log_mask(CPU_LOG_INT, "...really an SG instruction at 0x%08" PRIx32
@@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs)
 
     arm_log_exception(cs->exception_index);
 
-    /* For exceptions we just mark as pending on the NVIC, and let that
-       handle it.  */
+    /*
+     * For exceptions we just mark as pending on the NVIC, and let that
+     * handle it.
+     */
     switch (cs->exception_index) {
     case EXCP_UDEF:
         armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure);
@@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs)
         break;
     case EXCP_PREFETCH_ABORT:
     case EXCP_DATA_ABORT:
-        /* Note that for M profile we don't have a guest facing FSR, but
+        /*
+         * Note that for M profile we don't have a guest facing FSR, but
          * the env->exception.fsr will be populated by the code that
          * raises the fault, in the A profile short-descriptor format.
          */
         switch (env->exception.fsr & 0xf) {
         case M_FAKE_FSR_NSC_EXEC:
-            /* Exception generated when we try to execute code at an address
+            /*
+             * Exception generated when we try to execute code at an address
              * which is marked as Secure & Non-Secure Callable and the CPU
              * is in the Non-Secure state. The only instruction which can
              * be executed like this is SG (and that only if both halves of
@@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs)
             }
             break;
         case M_FAKE_FSR_SFAULT:
-            /* Various flavours of SecureFault for attempts to execute or
+            /*
+             * Various flavours of SecureFault for attempts to execute or
              * access data in the wrong security state.
              */
             switch (cs->exception_index) {
@@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs)
             armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_BUS, false);
             break;
         default:
-            /* All other FSR values are either MPU faults or "can't happen
+            /*
+             * All other FSR values are either MPU faults or "can't happen
              * for M profile" cases.
              */
             switch (cs->exception_index) {
@@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs)
     if (arm_feature(env, ARM_FEATURE_V8)) {
         lr = R_V7M_EXCRET_RES1_MASK |
             R_V7M_EXCRET_DCRS_MASK;
-        /* The S bit indicates whether we should return to Secure
+        /*
+         * The S bit indicates whether we should return to Secure
          * or NonSecure (ie our current state).
          * The ES bit indicates whether we're taking this exception
          * to Secure or NonSecure (ie our target state). We set it
@@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs)
     v7m_exception_taken(cpu, lr, false, ignore_stackfaults);
 }
 
-/* Function used to synchronize QEMU's AArch64 register set with AArch32
+/*
+ * Function used to synchronize QEMU's AArch64 register set with AArch32
  * register set.  This is necessary when switching between AArch32 and AArch64
  * execution state.
  */
@@ -XXX,XX +XXX,XX @@ void aarch64_sync_32_to_64(CPUARMState *env)
         env->xregs[i] = env->regs[i];
     }
 
-    /* Unless we are in FIQ mode, x8-x12 come from the user registers r8-r12.
+    /*
+     * Unless we are in FIQ mode, x8-x12 come from the user registers r8-r12.
      * Otherwise, they come from the banked user regs.
      */
     if (mode == ARM_CPU_MODE_FIQ) {
@@ -XXX,XX +XXX,XX @@ void aarch64_sync_32_to_64(CPUARMState *env)
         }
     }
 
-    /* Registers x13-x23 are the various mode SP and FP registers. Registers
+    /*
+     * Registers x13-x23 are the various mode SP and FP registers. Registers
      * r13 and r14 are only copied if we are in that mode, otherwise we copy
      * from the mode banked register.
      */
@@ -XXX,XX +XXX,XX @@ void aarch64_sync_32_to_64(CPUARMState *env)
         env->xregs[23] = env->banked_r13[bank_number(ARM_CPU_MODE_UND)];
     }
 
-    /* Registers x24-x30 are mapped to r8-r14 in FIQ mode.  If we are in FIQ
+    /*
+     * Registers x24-x30 are mapped to r8-r14 in FIQ mode.  If we are in FIQ
      * mode, then we can copy from r8-r14.  Otherwise, we copy from the
      * FIQ bank for r8-r14.
      */
@@ -XXX,XX +XXX,XX @@ void aarch64_sync_32_to_64(CPUARMState *env)
     env->pc = env->regs[15];
 }
 
-/* Function used to synchronize QEMU's AArch32 register set with AArch64
+/*
+ * Function used to synchronize QEMU's AArch32 register set with AArch64
  * register set.  This is necessary when switching between AArch32 and AArch64
  * execution state.
  */
@@ -XXX,XX +XXX,XX @@ void aarch64_sync_64_to_32(CPUARMState *env)
         env->regs[i] = env->xregs[i];
     }
 
-    /* Unless we are in FIQ mode, r8-r12 come from the user registers x8-x12.
+    /*
+     * Unless we are in FIQ mode, r8-r12 come from the user registers x8-x12.
      * Otherwise, we copy x8-x12 into the banked user regs.
      */
     if (mode == ARM_CPU_MODE_FIQ) {
@@ -XXX,XX +XXX,XX @@ void aarch64_sync_64_to_32(CPUARMState *env)
         }
     }
 
-    /* Registers r13 & r14 depend on the current mode.
+    /*
+     * Registers r13 & r14 depend on the current mode.
      * If we are in a given mode, we copy the corresponding x registers to r13
      * and r14.  Otherwise, we copy the x register to the banked r13 and r14
      * for the mode.
@@ -XXX,XX +XXX,XX @@ void aarch64_sync_64_to_32(CPUARMState *env)
     } else {
         env->banked_r13[bank_number(ARM_CPU_MODE_USR)] = env->xregs[13];
 
-        /* HYP is an exception in that it does not have its own banked r14 but
+        /*
+         * HYP is an exception in that it does not have its own banked r14 but
          * shares the USR r14
          */
         if (mode == ARM_CPU_MODE_HYP) {
@@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_mrs)(CPUARMState *env, uint32_t reg)
         return value;
     }
     case 0x94: /* CONTROL_NS */
-        /* We have to handle this here because unprivileged Secure code
+        /*
+         * We have to handle this here because unprivileged Secure code
          * can read the NS CONTROL register.
          */
         if (!env->v7m.secure) {
@@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_mrs)(CPUARMState *env, uint32_t reg)
             return env->v7m.faultmask[M_REG_NS];
         case 0x98: /* SP_NS */
         {
-            /* This gives the non-secure SP selected based on whether we're
+            /*
+             * This gives the non-secure SP selected based on whether we're
              * currently in handler mode or not, using the NS CONTROL.SPSEL.
              */
             bool spsel = env->v7m.control[M_REG_NS] & R_V7M_CONTROL_SPSEL_MASK;
@@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_mrs)(CPUARMState *env, uint32_t reg)
 
 void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val)
 {
-    /* We're passed bits [11..0] of the instruction; extract
+    /*
+     * We're passed bits [11..0] of the instruction; extract
      * SYSm and the mask bits.
      * Invalid combinations of SYSm and mask are UNPREDICTABLE;
      * we choose to treat them as if the mask bits were valid.
@@ -XXX,XX +XXX,XX @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val)
             return;
         case 0x98: /* SP_NS */
         {
-            /* This gives the non-secure SP selected based on whether we're
+            /*
+             * This gives the non-secure SP selected based on whether we're
              * currently in handler mode or not, using the NS CONTROL.SPSEL.
              */
             bool spsel = env->v7m.control[M_REG_NS] & R_V7M_CONTROL_SPSEL_MASK;
@@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op)
     bool targetsec = env->v7m.secure;
     bool is_subpage;
 
-    /* Work out what the security state and privilege level we're
+    /*
+     * Work out what the security state and privilege level we're
      * interested in is...
      */
     if (alt) {
@@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op)
     /* ...and then figure out which MMU index this is */
     mmu_idx = arm_v7m_mmu_idx_for_secstate_and_priv(env, targetsec, targetpriv);
 
-    /* We know that the MPU and SAU don't care about the access type
+    /*
+     * We know that the MPU and SAU don't care about the access type
      * for our purposes beyond that we don't want to claim to be
      * an insn fetch, so we arbitrarily call this a read.
      */
 
-    /* MPU region info only available for privileged or if
+    /*
+     * MPU region info only available for privileged or if
      * inspecting the other MPU state.
      */
     if (arm_current_el(env) != 0 || alt) {
@@ -XXX,XX +XXX,XX @@ bool arm_cpu_tlb_fill(CPUState *cs, vaddr address, int size,
 
 void HELPER(dc_zva)(CPUARMState *env, uint64_t vaddr_in)
 {
-    /* Implement DC ZVA, which zeroes a fixed-length block of memory.
+    /*
+     * Implement DC ZVA, which zeroes a fixed-length block of memory.
      * Note that we do not implement the (architecturally mandated)
      * alignment fault for attempts to use this on Device memory
      * (which matches the usual QEMU behaviour of not implementing either
@@ -XXX,XX +XXX,XX @@ void HELPER(dc_zva)(CPUARMState *env, uint64_t vaddr_in)
 
 #ifndef CONFIG_USER_ONLY
     {
-        /* Slightly awkwardly, QEMU's TARGET_PAGE_SIZE may be less than
+        /*
+         * Slightly awkwardly, QEMU's TARGET_PAGE_SIZE may be less than
          * the block size so we might have to do more than one TLB lookup.
          * We know that in fact for any v8 CPU the page size is at least 4K
          * and the block size must be 2K or less, but TARGET_PAGE_SIZE is only
@@ -XXX,XX +XXX,XX @@ void HELPER(dc_zva)(CPUARMState *env, uint64_t vaddr_in)
                 }
             }
             if (i == maxidx) {
-                /* If it's all in the TLB it's fair game for just writing to;
+                /*
+                 * If it's all in the TLB it's fair game for just writing to;
                  * we know we don't need to update dirty status, etc.
                  */
                 for (i = 0; i < maxidx - 1; i++) {
@@ -XXX,XX +XXX,XX @@ void HELPER(dc_zva)(CPUARMState *env, uint64_t vaddr_in)
                 memset(hostaddr[i], 0, blocklen - (i * TARGET_PAGE_SIZE));
                 return;
             }
-            /* OK, try a store and see if we can populate the tlb. This
+            /*
+             * OK, try a store and see if we can populate the tlb. This
              * might cause an exception if the memory isn't writable,
              * in which case we will longjmp out of here. We must for
              * this purpose use the actual register value passed to us
@@ -XXX,XX +XXX,XX @@ void HELPER(dc_zva)(CPUARMState *env, uint64_t vaddr_in)
             }
         }
 
-        /* Slow path (probably attempt to do this to an I/O device or
+        /*
+         * Slow path (probably attempt to do this to an I/O device or
          * similar, or clearing of a block of code we have translations
          * cached for). Just do a series of byte writes as the architecture
          * demands. It's not worth trying to use a cpu_physical_memory_map(),
diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/op_helper.c
+++ b/target/arm/op_helper.c
@@ -XXX,XX +XXX,XX @@ static inline uint32_t merge_syn_data_abort(uint32_t template_syn,
 {
     uint32_t syn;
 
-    /* ISV is only set for data aborts routed to EL2 and
+    /*
+     * ISV is only set for data aborts routed to EL2 and
      * never for stage-1 page table walks faulting on stage 2.
      *
      * Furthermore, ISV is only set for certain kinds of load/stores.
@@ -XXX,XX +XXX,XX @@ static inline uint32_t merge_syn_data_abort(uint32_t template_syn,
         syn = syn_data_abort_no_iss(same_el,
                                     ea, 0, s1ptw, is_write, fsc);
     } else {
-        /* Fields: IL, ISV, SAS, SSE, SRT, SF and AR come from the template
+        /*
+         * Fields: IL, ISV, SAS, SSE, SRT, SF and AR come from the template
          * syndrome created at translation time.
          * Now we create the runtime syndrome with the remaining fields.
          */
@@ -XXX,XX +XXX,XX @@ void arm_deliver_fault(ARMCPU *cpu, vaddr addr, MMUAccessType access_type,
 
     if (target_el == 2 || arm_el_is_aa64(env, target_el) ||
         arm_s1_regime_using_lpae_format(env, arm_mmu_idx)) {
-        /* LPAE format fault status register : bottom 6 bits are
+        /*
+         * LPAE format fault status register : bottom 6 bits are
          * status code in the same form as needed for syndrome
          */
         fsr = arm_fi_to_lfsc(fi);
         fsc = extract32(fsr, 0, 6);
     } else {
         fsr = arm_fi_to_sfsc(fi);
-        /* Short format FSR : this fault will never actually be reported
+        /*
+         * Short format FSR : this fault will never actually be reported
          * to an EL that uses a syndrome register. Use a (currently)
          * reserved FSR code in case the constructed syndrome does leak
          * into the guest somehow.
@@ -XXX,XX +XXX,XX @@ void arm_cpu_do_unaligned_access(CPUState *cs, vaddr vaddr,
     arm_deliver_fault(cpu, vaddr, access_type, mmu_idx, &fi);
 }
 
-/* arm_cpu_do_transaction_failed: handle a memory system error response
+/*
+ * arm_cpu_do_transaction_failed: handle a memory system error response
  * (eg "no device/memory present at address") by raising an external abort
  * exception
  */
@@ -XXX,XX +XXX,XX @@ static bool linked_bp_matches(ARMCPU *cpu, int lbn)
     int bt;
     uint32_t contextidr;
 
-    /* Links to unimplemented or non-context aware breakpoints are
+    /*
+     * Links to unimplemented or non-context aware breakpoints are
      * CONSTRAINED UNPREDICTABLE: either behave as if disabled, or
      * as if linked to an UNKNOWN context-aware breakpoint (in which
      * case DBGWCR<n>_EL1.LBN must indicate that breakpoint).
@@ -XXX,XX +XXX,XX @@ static bool linked_bp_matches(ARMCPU *cpu, int lbn)
 
     bt = extract64(bcr, 20, 4);
 
-    /* We match the whole register even if this is AArch32 using the
+    /*
+     * We match the whole register even if this is AArch32 using the
      * short descriptor format (in which case it holds both PROCID and ASID),
      * since we don't implement the optional v7 context ID masking.
      */
@@ -XXX,XX +XXX,XX @@ static bool linked_bp_matches(ARMCPU *cpu, int lbn)
     case 9: /* linked VMID match (reserved if no EL2) */
     case 11: /* linked context ID and VMID match (reserved if no EL2) */
     default:
-        /* Links to Unlinked context breakpoints must generate no
+        /*
+         * Links to Unlinked context breakpoints must generate no
          * events; we choose to do the same for reserved values too.
          */
         return false;
@@ -XXX,XX +XXX,XX @@ static bool bp_wp_matches(ARMCPU *cpu, int n, bool is_wp)
     CPUARMState *env = &cpu->env;
     uint64_t cr;
     int pac, hmc, ssc, wt, lbn;
-    /* Note that for watchpoints the check is against the CPU security
+    /*
+     * Note that for watchpoints the check is against the CPU security
      * state, not the S/NS attribute on the offending data access.
      */
     bool is_secure = arm_is_secure(env);
@@ -XXX,XX +XXX,XX @@ static bool bp_wp_matches(ARMCPU *cpu, int n, bool is_wp)
         }
         cr = env->cp15.dbgwcr[n];
         if (wp->hitattrs.user) {
-            /* The LDRT/STRT/LDT/STT "unprivileged access" instructions should
+            /*
+             * The LDRT/STRT/LDT/STT "unprivileged access" instructions should
              * match watchpoints as if they were accesses done at EL0, even if
              * the CPU is at EL1 or higher.
              */
@@ -XXX,XX +XXX,XX @@ static bool bp_wp_matches(ARMCPU *cpu, int n, bool is_wp)
         }
         cr = env->cp15.dbgbcr[n];
     }
-    /* The WATCHPOINT_HIT flag guarantees us that the watchpoint is
+    /*
+     * The WATCHPOINT_HIT flag guarantees us that the watchpoint is
      * enabled and that the address and access type match; for breakpoints
      * we know the address matched; check the remaining fields, including
      * linked breakpoints. We rely on WCR and BCR having the same layout
@@ -XXX,XX +XXX,XX @@ static bool check_watchpoints(ARMCPU *cpu)
     CPUARMState *env = &cpu->env;
     int n;
 
-    /* If watchpoints are disabled globally or we can't take debug
+    /*
+     * If watchpoints are disabled globally or we can't take debug
      * exceptions here then watchpoint firings are ignored.
      */
     if (extract32(env->cp15.mdscr_el1, 15, 1) == 0
@@ -XXX,XX +XXX,XX @@ static bool check_breakpoints(ARMCPU *cpu)
     CPUARMState *env = &cpu->env;
     int n;
 
-    /* If breakpoints are disabled globally or we can't take debug
+    /*
+     * If breakpoints are disabled globally or we can't take debug
      * exceptions here then breakpoint firings are ignored.
      */
     if (extract32(env->cp15.mdscr_el1, 15, 1) == 0
@@ -XXX,XX +XXX,XX @@ void HELPER(check_breakpoints)(CPUARMState *env)
 
 bool arm_debug_check_watchpoint(CPUState *cs, CPUWatchpoint *wp)
 {
-    /* Called by core code when a CPU watchpoint fires; need to check if this
+    /*
+     * Called by core code when a CPU watchpoint fires; need to check if this
      * is also an architectural watchpoint match.
      */
     ARMCPU *cpu = ARM_CPU(cs);
@@ -XXX,XX +XXX,XX @@ vaddr arm_adjust_watchpoint_address(CPUState *cs, vaddr addr, int len)
     ARMCPU *cpu = ARM_CPU(cs);
     CPUARMState *env = &cpu->env;
 
-    /* In BE32 system mode, target memory is stored byteswapped (on a
+    /*
+     * In BE32 system mode, target memory is stored byteswapped (on a
      * little-endian host system), and by the time we reach here (via an
      * opcode helper) the addresses of subword accesses have been adjusted
      * to account for that, which means that watchpoints will not match.
@@ -XXX,XX +XXX,XX @@ vaddr arm_adjust_watchpoint_address(CPUState *cs, vaddr addr, int len)
 
 void arm_debug_excp_handler(CPUState *cs)
 {
-    /* Called by core code when a watchpoint or breakpoint fires;
+    /*
+     * Called by core code when a watchpoint or breakpoint fires;
      * need to check which one and raise the appropriate exception.
      */
     ARMCPU *cpu = ARM_CPU(cs);
@@ -XXX,XX +XXX,XX @@ void arm_debug_excp_handler(CPUState *cs)
         uint64_t pc = is_a64(env) ? env->pc : env->regs[15];
         bool same_el = (arm_debug_target_el(env) == arm_current_el(env));
 
-        /* (1) GDB breakpoints should be handled first.
+        /*
+         * (1) GDB breakpoints should be handled first.
          * (2) Do not raise a CPU exception if no CPU breakpoint has fired,
          * since singlestep is also done by generating a debug internal
          * exception.
@@ -XXX,XX +XXX,XX @@ void arm_debug_excp_handler(CPUState *cs)
         }
 
         env->exception.fsr = arm_debug_exception_fsr(env);
-        /* FAR is UNKNOWN: clear vaddress to avoid potentially exposing
+        /*
+         * FAR is UNKNOWN: clear vaddress to avoid potentially exposing
          * values to the guest that it shouldn't be able to see at its
          * exception/security level.
          */
diff --git a/target/arm/vfp_helper.c b/target/arm/vfp_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/vfp_helper.c
+++ b/target/arm/vfp_helper.c
@@ -XXX,XX +XXX,XX @@ void HELPER(vfp_set_fpscr)(CPUARMState *env, uint32_t val)
         set_default_nan_mode(dnan_enabled, &env->vfp.fp_status_f16);
     }
 
-    /* The exception flags are ORed together when we read fpscr so we
+    /*
+     * The exception flags are ORed together when we read fpscr so we
      * only need to preserve the current state in one of our
      * float_status values.
      */
-- 
2.20.1

From: Philippe Mathieu-Daudé <philmd@redhat.com>

Since we'll move this code around, fix its style first.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190701132516.26392-9-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/translate.c  | 11 ++++++-----
 target/arm/vfp_helper.c | 36 ++++++++++++++++++++++++------------
 2 files changed, 30 insertions(+), 17 deletions(-)

diff --git a/target/arm/translate.c b/target/arm/translate.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/translate.c
+++ b/target/arm/translate.c
@@ -XXX,XX +XXX,XX @@ static void disas_arm_insn(DisasContext *s, unsigned int insn)
                 loaded_base = 0;
                 loaded_var = NULL;
                 n = 0;
-                for(i=0;i<16;i++) {
+                for (i = 0; i < 16; i++) {
                     if (insn & (1 << i))
                         n++;
                 }
@@ -XXX,XX +XXX,XX @@ static void disas_arm_insn(DisasContext *s, unsigned int insn)
                     }
                 }
                 j = 0;
-                for(i=0;i<16;i++) {
+                for (i = 0; i < 16; i++) {
                     if (insn & (1 << i)) {
                         if (is_load) {
                             /* load */
@@ -XXX,XX +XXX,XX @@ void arm_cpu_dump_state(CPUState *cs, FILE *f, int flags)
         return;
     }
 
-    for(i=0;i<16;i++) {
+    for (i = 0; i < 16; i++) {
         qemu_fprintf(f, "R%02d=%08x", i, env->regs[i]);
-        if ((i % 4) == 3)
+        if ((i % 4) == 3) {
             qemu_fprintf(f, "\n");
-        else
+        } else {
             qemu_fprintf(f, " ");
+        }
     }
 
     if (arm_feature(env, ARM_FEATURE_M)) {
diff --git a/target/arm/vfp_helper.c b/target/arm/vfp_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/vfp_helper.c
+++ b/target/arm/vfp_helper.c
@@ -XXX,XX +XXX,XX @@ static inline int vfp_exceptbits_from_host(int host_bits)
 {
     int target_bits = 0;
 
-    if (host_bits & float_flag_invalid)
+    if (host_bits & float_flag_invalid) {
         target_bits |= 1;
-    if (host_bits & float_flag_divbyzero)
+    }
+    if (host_bits & float_flag_divbyzero) {
         target_bits |= 2;
-    if (host_bits & float_flag_overflow)
+    }
+    if (host_bits & float_flag_overflow) {
         target_bits |= 4;
-    if (host_bits & (float_flag_underflow | float_flag_output_denormal))
+    }
+    if (host_bits & (float_flag_underflow | float_flag_output_denormal)) {
         target_bits |= 8;
-    if (host_bits & float_flag_inexact)
+    }
+    if (host_bits & float_flag_inexact) {
         target_bits |= 0x10;
-    if (host_bits & float_flag_input_denormal)
+    }
+    if (host_bits & float_flag_input_denormal) {
         target_bits |= 0x80;
+    }
     return target_bits;
 }
 
@@ -XXX,XX +XXX,XX @@ static inline int vfp_exceptbits_to_host(int target_bits)
 {
     int host_bits = 0;
 
-    if (target_bits & 1)
+    if (target_bits & 1) {
         host_bits |= float_flag_invalid;
-    if (target_bits & 2)
+    }
+    if (target_bits & 2) {
         host_bits |= float_flag_divbyzero;
-    if (target_bits & 4)
+    }
+    if (target_bits & 4) {
         host_bits |= float_flag_overflow;
-    if (target_bits & 8)
+    }
+    if (target_bits & 8) {
         host_bits |= float_flag_underflow;
-    if (target_bits & 0x10)
+    }
+    if (target_bits & 0x10) {
         host_bits |= float_flag_inexact;
-    if (target_bits & 0x80)
+    }
+    if (target_bits & 0x80) {
         host_bits |= float_flag_input_denormal;
+    }
     return host_bits;
 }
 
-- 
2.20.1

From: Samuel Ortiz <sameo@linux.intel.com>

Those helpers are a software implementation of the ARM v8 memory zeroing
op code. They should be moved to the op helper file, which is going to
eventually be built only when TCG is enabled.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Robert Bradford <robert.bradford@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190701132516.26392-10-philmd@redhat.com
[PMD: Rebased]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/helper.c    | 92 -----------------------------------------
 target/arm/op_helper.c | 93 ++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 93 insertions(+), 92 deletions(-)

diff --git a/target/arm/helper.c b/target/arm/helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -XXX,XX +XXX,XX @@ bool arm_cpu_tlb_fill(CPUState *cs, vaddr address, int size,
 #endif
 }
 
-void HELPER(dc_zva)(CPUARMState *env, uint64_t vaddr_in)
-{
-    /*
-     * Implement DC ZVA, which zeroes a fixed-length block of memory.
-     * Note that we do not implement the (architecturally mandated)
-     * alignment fault for attempts to use this on Device memory
-     * (which matches the usual QEMU behaviour of not implementing either
-     * alignment faults or any memory attribute handling).
-     */
-
-    ARMCPU *cpu = env_archcpu(env);
-    uint64_t blocklen = 4 << cpu->dcz_blocksize;
-    uint64_t vaddr = vaddr_in & ~(blocklen - 1);
-
-#ifndef CONFIG_USER_ONLY
-    {
-        /*
-         * Slightly awkwardly, QEMU's TARGET_PAGE_SIZE may be less than
-         * the block size so we might have to do more than one TLB lookup.
-         * We know that in fact for any v8 CPU the page size is at least 4K
-         * and the block size must be 2K or less, but TARGET_PAGE_SIZE is only
-         * 1K as an artefact of legacy v5 subpage support being present in the
-         * same QEMU executable. So in practice the hostaddr[] array has
-         * two entries, given the current setting of TARGET_PAGE_BITS_MIN.
-         */
-        int maxidx = DIV_ROUND_UP(blocklen, TARGET_PAGE_SIZE);
-        void *hostaddr[DIV_ROUND_UP(2 * KiB, 1 << TARGET_PAGE_BITS_MIN)];
-        int try, i;
-        unsigned mmu_idx = cpu_mmu_index(env, false);
-        TCGMemOpIdx oi = make_memop_idx(MO_UB, mmu_idx);
-
-        assert(maxidx <= ARRAY_SIZE(hostaddr));
-
-        for (try = 0; try < 2; try++) {
-
-            for (i = 0; i < maxidx; i++) {
-                hostaddr[i] = tlb_vaddr_to_host(env,
-                                                vaddr + TARGET_PAGE_SIZE * i,
-                                                1, mmu_idx);
-                if (!hostaddr[i]) {
-                    break;
-                }
-            }
-            if (i == maxidx) {
-                /*
-                 * If it's all in the TLB it's fair game for just writing to;
-                 * we know we don't need to update dirty status, etc.
-                 */
-                for (i = 0; i < maxidx - 1; i++) {
-                    memset(hostaddr[i], 0, TARGET_PAGE_SIZE);
-                }
-                memset(hostaddr[i], 0, blocklen - (i * TARGET_PAGE_SIZE));
-                return;
-            }
-            /*
-             * OK, try a store and see if we can populate the tlb. This
-             * might cause an exception if the memory isn't writable,
-             * in which case we will longjmp out of here. We must for
-             * this purpose use the actual register value passed to us
-             * so that we get the fault address right.
-             */
-            helper_ret_stb_mmu(env, vaddr_in, 0, oi, GETPC());
-            /* Now we can populate the other TLB entries, if any */
-            for (i = 0; i < maxidx; i++) {
-                uint64_t va = vaddr + TARGET_PAGE_SIZE * i;
-                if (va != (vaddr_in & TARGET_PAGE_MASK)) {
-                    helper_ret_stb_mmu(env, va, 0, oi, GETPC());
-                }
-            }
-        }
-
-        /*
-         * Slow path (probably attempt to do this to an I/O device or
-         * similar, or clearing of a block of code we have translations
-         * cached for). Just do a series of byte writes as the architecture
-         * demands. It's not worth trying to use a cpu_physical_memory_map(),
-         * memset(), unmap() sequence here because:
-         *  + we'd need to account for the blocksize being larger than a page
-         *  + the direct-RAM access case is almost always going to be dealt
-         *    with in the fastpath code above, so there's no speed benefit
-         *  + we would have to deal with the map returning NULL because the
-         *    bounce buffer was in use
-         */
-        for (i = 0; i < blocklen; i++) {
-            helper_ret_stb_mmu(env, vaddr + i, 0, oi, GETPC());
-        }
-    }
-#else
-    memset(g2h(vaddr), 0, blocklen);
-#endif
-}
-
 /* Note that signed overflow is undefined in C.  The following routines are
    careful to use unsigned types where modulo arithmetic is required.
    Failure to do so _will_ break on newer gcc.  */
diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/op_helper.c
+++ b/target/arm/op_helper.c
@@ -XXX,XX +XXX,XX @@
  * License along with this library; if not, see <http://www.gnu.org/licenses/>.
  */
 #include "qemu/osdep.h"
+#include "qemu/units.h"
 #include "qemu/log.h"
 #include "qemu/main-loop.h"
 #include "cpu.h"
@@ -XXX,XX +XXX,XX @@ uint32_t HELPER(ror_cc)(CPUARMState *env, uint32_t x, uint32_t i)
         return ((uint32_t)x >> shift) | (x << (32 - shift));
     }
 }
+
+void HELPER(dc_zva)(CPUARMState *env, uint64_t vaddr_in)
+{
+    /*
+     * Implement DC ZVA, which zeroes a fixed-length block of memory.
+     * Note that we do not implement the (architecturally mandated)
+     * alignment fault for attempts to use this on Device memory
+     * (which matches the usual QEMU behaviour of not implementing either
+     * alignment faults or any memory attribute handling).
+     */
+
+    ARMCPU *cpu = env_archcpu(env);
+    uint64_t blocklen = 4 << cpu->dcz_blocksize;
+    uint64_t vaddr = vaddr_in & ~(blocklen - 1);
+
+#ifndef CONFIG_USER_ONLY
+    {
+        /*
+         * Slightly awkwardly, QEMU's TARGET_PAGE_SIZE may be less than
+         * the block size so we might have to do more than one TLB lookup.
+         * We know that in fact for any v8 CPU the page size is at least 4K
+         * and the block size must be 2K or less, but TARGET_PAGE_SIZE is only
+         * 1K as an artefact of legacy v5 subpage support being present in the
+         * same QEMU executable. So in practice the hostaddr[] array has
+         * two entries, given the current setting of TARGET_PAGE_BITS_MIN.
+         */
+        int maxidx = DIV_ROUND_UP(blocklen, TARGET_PAGE_SIZE);
+        void *hostaddr[DIV_ROUND_UP(2 * KiB, 1 << TARGET_PAGE_BITS_MIN)];
+        int try, i;
+        unsigned mmu_idx = cpu_mmu_index(env, false);
+        TCGMemOpIdx oi = make_memop_idx(MO_UB, mmu_idx);
+
+        assert(maxidx <= ARRAY_SIZE(hostaddr));
+
+        for (try = 0; try < 2; try++) {
+
+            for (i = 0; i < maxidx; i++) {
+                hostaddr[i] = tlb_vaddr_to_host(env,
+                                                vaddr + TARGET_PAGE_SIZE * i,
+                                                1, mmu_idx);
+                if (!hostaddr[i]) {
+                    break;
+                }
+            }
+            if (i == maxidx) {
+                /*
+                 * If it's all in the TLB it's fair game for just writing to;
+                 * we know we don't need to update dirty status, etc.
+                 */
+                for (i = 0; i < maxidx - 1; i++) {
+                    memset(hostaddr[i], 0, TARGET_PAGE_SIZE);
+                }
+                memset(hostaddr[i], 0, blocklen - (i * TARGET_PAGE_SIZE));
+                return;
+            }
+            /*
+             * OK, try a store and see if we can populate the tlb. This
+             * might cause an exception if the memory isn't writable,
+             * in which case we will longjmp out of here. We must for
+             * this purpose use the actual register value passed to us
+             * so that we get the fault address right.
+             */
+            helper_ret_stb_mmu(env, vaddr_in, 0, oi, GETPC());
+            /* Now we can populate the other TLB entries, if any */
+            for (i = 0; i < maxidx; i++) {
+                uint64_t va = vaddr + TARGET_PAGE_SIZE * i;
+                if (va != (vaddr_in & TARGET_PAGE_MASK)) {
+                    helper_ret_stb_mmu(env, va, 0, oi, GETPC());
+                }
+            }
+        }
+
+        /*
+         * Slow path (probably attempt to do this to an I/O device or
+         * similar, or clearing of a block of code we have translations
+         * cached for). Just do a series of byte writes as the architecture
+         * demands. It's not worth trying to use a cpu_physical_memory_map(),
+         * memset(), unmap() sequence here because:
+         *  + we'd need to account for the blocksize being larger than a page
+         *  + the direct-RAM access case is almost always going to be dealt
+         *    with in the fastpath code above, so there's no speed benefit
+         *  + we would have to deal with the map returning NULL because the
+         *    bounce buffer was in use
+         */
+        for (i = 0; i < blocklen; i++) {
+            helper_ret_stb_mmu(env, vaddr + i, 0, oi, GETPC());
+        }
+    }
+#else
+    memset(g2h(vaddr), 0, blocklen);
+#endif
+}
-- 
2.20.1

From: Philippe Mathieu-Daudé <philmd@redhat.com>

Suggested-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190701132516.26392-11-philmd@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu.h           |   2 -
 target/arm/translate.h     |   5 -
 target/arm/cpu.c           | 226 +++++++++++++++++++++++++++++++++++++
 target/arm/translate-a64.c | 128 ---------------------
 target/arm/translate.c     |  88 ---------------
 5 files changed, 226 insertions(+), 223 deletions(-)

diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -XXX,XX +XXX,XX @@ void arm_cpu_do_interrupt(CPUState *cpu);
 void arm_v7m_cpu_do_interrupt(CPUState *cpu);
 bool arm_cpu_exec_interrupt(CPUState *cpu, int int_req);
 
-void arm_cpu_dump_state(CPUState *cs, FILE *f, int flags);
-
 hwaddr arm_cpu_get_phys_page_attrs_debug(CPUState *cpu, vaddr addr,
                                          MemTxAttrs *attrs);
 
diff --git a/target/arm/translate.h b/target/arm/translate.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/translate.h
+++ b/target/arm/translate.h
@@ -XXX,XX +XXX,XX @@ static inline void disas_set_insn_syndrome(DisasContext *s, uint32_t syn)
 #ifdef TARGET_AARCH64
 void a64_translate_init(void);
 void gen_a64_set_pc_im(uint64_t val);
-void aarch64_cpu_dump_state(CPUState *cs, FILE *f, int flags);
 extern const TranslatorOps aarch64_translator_ops;
 #else
 static inline void a64_translate_init(void)
@@ -XXX,XX +XXX,XX @@ static inline void a64_translate_init(void)
 static inline void gen_a64_set_pc_im(uint64_t val)
 {
 }
-
-static inline void aarch64_cpu_dump_state(CPUState *cs, FILE *f, int flags)
-{
-}
 #endif
 
 void arm_test_cc(DisasCompare *cmp, int cc);
diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -XXX,XX +XXX,XX @@
  */
 
 #include "qemu/osdep.h"
+#include "qemu/qemu-print.h"
 #include "qemu-common.h"
 #include "target/arm/idau.h"
 #include "qemu/module.h"
@@ -XXX,XX +XXX,XX @@ static void arm_disas_set_info(CPUState *cpu, disassemble_info *info)
 #endif
 }
 
+#ifdef TARGET_AARCH64
+
+static void aarch64_cpu_dump_state(CPUState *cs, FILE *f, int flags)
+{
+    ARMCPU *cpu = ARM_CPU(cs);
+    CPUARMState *env = &cpu->env;
+    uint32_t psr = pstate_read(env);
+    int i;
+    int el = arm_current_el(env);
+    const char *ns_status;
+
+    qemu_fprintf(f, " PC=%016" PRIx64 " ", env->pc);
+    for (i = 0; i < 32; i++) {
+        if (i == 31) {
+            qemu_fprintf(f, " SP=%016" PRIx64 "\n", env->xregs[i]);
+        } else {
+            qemu_fprintf(f, "X%02d=%016" PRIx64 "%s", i, env->xregs[i],
+                         (i + 2) % 3 ? " " : "\n");
+        }
+    }
+
+    if (arm_feature(env, ARM_FEATURE_EL3) && el != 3) {
+        ns_status = env->cp15.scr_el3 & SCR_NS ? "NS " : "S ";
+    } else {
+        ns_status = "";
+    }
+    qemu_fprintf(f, "PSTATE=%08x %c%c%c%c %sEL%d%c",
+                 psr,
+                 psr & PSTATE_N ? 'N' : '-',
+                 psr & PSTATE_Z ? 'Z' : '-',
+                 psr & PSTATE_C ? 'C' : '-',
+                 psr & PSTATE_V ? 'V' : '-',
+                 ns_status,
+                 el,
+                 psr & PSTATE_SP ? 'h' : 't');
+
+    if (cpu_isar_feature(aa64_bti, cpu)) {
+        qemu_fprintf(f, "  BTYPE=%d", (psr & PSTATE_BTYPE) >> 10);
+    }
+    if (!(flags & CPU_DUMP_FPU)) {
+        qemu_fprintf(f, "\n");
+        return;
+    }
+    if (fp_exception_el(env, el) != 0) {
+        qemu_fprintf(f, "    FPU disabled\n");
+        return;
+    }
+    qemu_fprintf(f, "     FPCR=%08x FPSR=%08x\n",
+                 vfp_get_fpcr(env), vfp_get_fpsr(env));
+
+    if (cpu_isar_feature(aa64_sve, cpu) && sve_exception_el(env, el) == 0) {
+        int j, zcr_len = sve_zcr_len_for_el(env, el);
+
+        for (i = 0; i <= FFR_PRED_NUM; i++) {
+            bool eol;
+            if (i == FFR_PRED_NUM) {
+                qemu_fprintf(f, "FFR=");
+                /* It's last, so end the line.  */
+                eol = true;
+            } else {
+                qemu_fprintf(f, "P%02d=", i);
+                switch (zcr_len) {
+                case 0:
+                    eol = i % 8 == 7;
+                    break;
+                case 1:
+                    eol = i % 6 == 5;
+                    break;
+                case 2:
+                case 3:
+                    eol = i % 3 == 2;
+                    break;
+                default:
+                    /* More than one quadword per predicate.  */
+                    eol = true;
+                    break;
+                }
+            }
+            for (j = zcr_len / 4; j >= 0; j--) {
+                int digits;
+                if (j * 4 + 4 <= zcr_len + 1) {
+                    digits = 16;
+                } else {
+                    digits = (zcr_len % 4 + 1) * 4;
+                }
+                qemu_fprintf(f, "%0*" PRIx64 "%s", digits,
+                             env->vfp.pregs[i].p[j],
+                             j ? ":" : eol ? "\n" : " ");
+            }
+        }
+
+        for (i = 0; i < 32; i++) {
+            if (zcr_len == 0) {
+                qemu_fprintf(f, "Z%02d=%016" PRIx64 ":%016" PRIx64 "%s",
+                             i, env->vfp.zregs[i].d[1],
+                             env->vfp.zregs[i].d[0], i & 1 ? "\n" : " ");
+            } else if (zcr_len == 1) {
+                qemu_fprintf(f, "Z%02d=%016" PRIx64 ":%016" PRIx64
+                             ":%016" PRIx64 ":%016" PRIx64 "\n",
+                             i, env->vfp.zregs[i].d[3], env->vfp.zregs[i].d[2],
+                             env->vfp.zregs[i].d[1], env->vfp.zregs[i].d[0]);
+            } else {
+                for (j = zcr_len; j >= 0; j--) {
+                    bool odd = (zcr_len - j) % 2 != 0;
+                    if (j == zcr_len) {
+                        qemu_fprintf(f, "Z%02d[%x-%x]=", i, j, j - 1);
+                    } else if (!odd) {
+                        if (j > 0) {
+                            qemu_fprintf(f, "   [%x-%x]=", j, j - 1);
+                        } else {
+                            qemu_fprintf(f, "     [%x]=", j);
+                        }
+                    }
+                    qemu_fprintf(f, "%016" PRIx64 ":%016" PRIx64 "%s",
+                                 env->vfp.zregs[i].d[j * 2 + 1],
+                                 env->vfp.zregs[i].d[j * 2],
+                                 odd || j == 0 ? "\n" : ":");
+                }
+            }
+        }
+    } else {
+        for (i = 0; i < 32; i++) {
+            uint64_t *q = aa64_vfp_qreg(env, i);
+            qemu_fprintf(f, "Q%02d=%016" PRIx64 ":%016" PRIx64 "%s",
+                         i, q[1], q[0], (i & 1 ? "\n" : " "));
+        }
+    }
+}
+
+#else
+
+static inline void aarch64_cpu_dump_state(CPUState *cs, FILE *f, int flags)
+{
+    g_assert_not_reached();
+}
+
+#endif
+
+static void arm_cpu_dump_state(CPUState *cs, FILE *f, int flags)
+{
+    ARMCPU *cpu = ARM_CPU(cs);
+    CPUARMState *env = &cpu->env;
+    int i;
+
+    if (is_a64(env)) {
+        aarch64_cpu_dump_state(cs, f, flags);
+        return;
+    }
+
+    for (i = 0; i < 16; i++) {
+        qemu_fprintf(f, "R%02d=%08x", i, env->regs[i]);
+        if ((i % 4) == 3) {
+            qemu_fprintf(f, "\n");
+        } else {
+            qemu_fprintf(f, " ");
+        }
+    }
+
+    if (arm_feature(env, ARM_FEATURE_M)) {
+        uint32_t xpsr = xpsr_read(env);
+        const char *mode;
+        const char *ns_status = "";
+
+        if (arm_feature(env, ARM_FEATURE_M_SECURITY)) {
+            ns_status = env->v7m.secure ? "S " : "NS ";
+        }
+
+        if (xpsr & XPSR_EXCP) {
+            mode = "handler";
+        } else {
+            if (env->v7m.control[env->v7m.secure] & R_V7M_CONTROL_NPRIV_MASK) {
+                mode = "unpriv-thread";
+            } else {
+                mode = "priv-thread";
+            }
+        }
+
+        qemu_fprintf(f, "XPSR=%08x %c%c%c%c %c %s%s\n",
+                     xpsr,
+                     xpsr & XPSR_N ? 'N' : '-',
+                     xpsr & XPSR_Z ? 'Z' : '-',
+                     xpsr & XPSR_C ? 'C' : '-',
+                     xpsr & XPSR_V ? 'V' : '-',
+                     xpsr & XPSR_T ? 'T' : 'A',
+                     ns_status,
+                     mode);
+    } else {
+        uint32_t psr = cpsr_read(env);
+        const char *ns_status = "";
+
+        if (arm_feature(env, ARM_FEATURE_EL3) &&
+            (psr & CPSR_M) != ARM_CPU_MODE_MON) {
+            ns_status = env->cp15.scr_el3 & SCR_NS ? "NS " : "S ";
+        }
+
+        qemu_fprintf(f, "PSR=%08x %c%c%c%c %c %s%s%d\n",
+                     psr,
+                     psr & CPSR_N ? 'N' : '-',
+                     psr & CPSR_Z ? 'Z' : '-',
+                     psr & CPSR_C ? 'C' : '-',
+                     psr & CPSR_V ? 'V' : '-',
+                     psr & CPSR_T ? 'T' : 'A',
+                     ns_status,
+                     aarch32_mode_name(psr), (psr & 0x10) ? 32 : 26);
+    }
+
+    if (flags & CPU_DUMP_FPU) {
+        int numvfpregs = 0;
+        if (arm_feature(env, ARM_FEATURE_VFP)) {
+            numvfpregs += 16;
+        }
+        if (arm_feature(env, ARM_FEATURE_VFP3)) {
+            numvfpregs += 16;
+        }
+        for (i = 0; i < numvfpregs; i++) {
+            uint64_t v = *aa32_vfp_dreg(env, i);
+            qemu_fprintf(f, "s%02d=%08x s%02d=%08x d%02d=%016" PRIx64 "\n",
+                         i * 2, (uint32_t)v,
+                         i * 2 + 1, (uint32_t)(v >> 32),
+                         i, v);
+        }
+        qemu_fprintf(f, "FPSCR: %08x\n", vfp_get_fpscr(env));
+    }
+}
+
 uint64_t arm_cpu_mp_affinity(int idx, uint8_t clustersz)
 {
     uint32_t Aff1 = idx / clustersz;
diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/translate-a64.c
+++ b/target/arm/translate-a64.c
@@ -XXX,XX +XXX,XX @@
 #include "translate.h"
 #include "internals.h"
 #include "qemu/host-utils.h"
-#include "qemu/qemu-print.h"
 
 #include "hw/semihosting/semihost.h"
 #include "exec/gen-icount.h"
@@ -XXX,XX +XXX,XX @@ static void set_btype(DisasContext *s, int val)
     s->btype = -1;
 }
 
-void aarch64_cpu_dump_state(CPUState *cs, FILE *f, int flags)
-{
-    ARMCPU *cpu = ARM_CPU(cs);
-    CPUARMState *env = &cpu->env;
-    uint32_t psr = pstate_read(env);
-    int i;
-    int el = arm_current_el(env);
-    const char *ns_status;
-
-    qemu_fprintf(f, " PC=%016" PRIx64 " ", env->pc);
-    for (i = 0; i < 32; i++) {
-        if (i == 31) {
-            qemu_fprintf(f, " SP=%016" PRIx64 "\n", env->xregs[i]);
-        } else {
-            qemu_fprintf(f, "X%02d=%016" PRIx64 "%s", i, env->xregs[i],
-                         (i + 2) % 3 ? " " : "\n");
-        }
-    }
-
-    if (arm_feature(env, ARM_FEATURE_EL3) && el != 3) {
-        ns_status = env->cp15.scr_el3 & SCR_NS ? "NS " : "S ";
-    } else {
-        ns_status = "";
-    }
-    qemu_fprintf(f, "PSTATE=%08x %c%c%c%c %sEL%d%c",
-                 psr,
-                 psr & PSTATE_N ? 'N' : '-',
-                 psr & PSTATE_Z ? 'Z' : '-',
-                 psr & PSTATE_C ? 'C' : '-',
-                 psr & PSTATE_V ? 'V' : '-',
-                 ns_status,
-                 el,
-                 psr & PSTATE_SP ? 'h' : 't');
-
-    if (cpu_isar_feature(aa64_bti, cpu)) {
-        qemu_fprintf(f, "  BTYPE=%d", (psr & PSTATE_BTYPE) >> 10);
-    }
-    if (!(flags & CPU_DUMP_FPU)) {
-        qemu_fprintf(f, "\n");
-        return;
-    }
-    if (fp_exception_el(env, el) != 0) {
-        qemu_fprintf(f, "    FPU disabled\n");
-        return;
-    }
-    qemu_fprintf(f, "     FPCR=%08x FPSR=%08x\n",
-                 vfp_get_fpcr(env), vfp_get_fpsr(env));
-
-    if (cpu_isar_feature(aa64_sve, cpu) && sve_exception_el(env, el) == 0) {
-        int j, zcr_len = sve_zcr_len_for_el(env, el);
-
-        for (i = 0; i <= FFR_PRED_NUM; i++) {
-            bool eol;
-            if (i == FFR_PRED_NUM) {
-                qemu_fprintf(f, "FFR=");
-                /* It's last, so end the line.  */
-                eol = true;
-            } else {
-                qemu_fprintf(f, "P%02d=", i);
-                switch (zcr_len) {
-                case 0:
-                    eol = i % 8 == 7;
-                    break;
-                case 1:
-                    eol = i % 6 == 5;
-                    break;
-                case 2:
-                case 3:
-                    eol = i % 3 == 2;
-                    break;
-                default:
-                    /* More than one quadword per predicate.  */
-                    eol = true;
-                    break;
-                }
-            }
-            for (j = zcr_len / 4; j >= 0; j--) {
-                int digits;
-                if (j * 4 + 4 <= zcr_len + 1) {
-                    digits = 16;
-                } else {
-                    digits = (zcr_len % 4 + 1) * 4;
-                }
-                qemu_fprintf(f, "%0*" PRIx64 "%s", digits,
-                             env->vfp.pregs[i].p[j],
-                             j ? ":" : eol ? "\n" : " ");
-            }
-        }
-
-        for (i = 0; i < 32; i++) {
-            if (zcr_len == 0) {
-                qemu_fprintf(f, "Z%02d=%016" PRIx64 ":%016" PRIx64 "%s",
-                             i, env->vfp.zregs[i].d[1],
-                             env->vfp.zregs[i].d[0], i & 1 ? "\n" : " ");
-            } else if (zcr_len == 1) {
-                qemu_fprintf(f, "Z%02d=%016" PRIx64 ":%016" PRIx64
-                             ":%016" PRIx64 ":%016" PRIx64 "\n",
-                             i, env->vfp.zregs[i].d[3], env->vfp.zregs[i].d[2],
-                             env->vfp.zregs[i].d[1], env->vfp.zregs[i].d[0]);
-            } else {
-                for (j = zcr_len; j >= 0; j--) {
-                    bool odd = (zcr_len - j) % 2 != 0;
-                    if (j == zcr_len) {
-                        qemu_fprintf(f, "Z%02d[%x-%x]=", i, j, j - 1);
-                    } else if (!odd) {
-                        if (j > 0) {
-                            qemu_fprintf(f, "   [%x-%x]=", j, j - 1);
-                        } else {
-                            qemu_fprintf(f, "     [%x]=", j);
-                        }
-                    }
-                    qemu_fprintf(f, "%016" PRIx64 ":%016" PRIx64 "%s",
-                                 env->vfp.zregs[i].d[j * 2 + 1],
-                                 env->vfp.zregs[i].d[j * 2],
-                                 odd || j == 0 ? "\n" : ":");
-                }
-            }
-        }
-    } else {
-        for (i = 0; i < 32; i++) {
-            uint64_t *q = aa64_vfp_qreg(env, i);
-            qemu_fprintf(f, "Q%02d=%016" PRIx64 ":%016" PRIx64 "%s",
-                         i, q[1], q[0], (i & 1 ? "\n" : " "));
-        }
-    }
-}
-
 void gen_a64_set_pc_im(uint64_t val)
 {
     tcg_gen_movi_i64(cpu_pc, val);
diff --git a/target/arm/translate.c b/target/arm/translate.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/translate.c
+++ b/target/arm/translate.c
@@ -XXX,XX +XXX,XX @@
 #include "tcg-op-gvec.h"
 #include "qemu/log.h"
 #include "qemu/bitops.h"
-#include "qemu/qemu-print.h"
 #include "arm_ldst.h"
 #include "hw/semihosting/semihost.h"
 
@@ -XXX,XX +XXX,XX @@ void gen_intermediate_code(CPUState *cpu, TranslationBlock *tb, int max_insns)
     translator_loop(ops, &dc.base, cpu, tb, max_insns);
 }
 
-void arm_cpu_dump_state(CPUState *cs, FILE *f, int flags)
-{
-    ARMCPU *cpu = ARM_CPU(cs);
-    CPUARMState *env = &cpu->env;
-    int i;
-
-    if (is_a64(env)) {
-        aarch64_cpu_dump_state(cs, f, flags);
-        return;
-    }
-
-    for (i = 0; i < 16; i++) {
-        qemu_fprintf(f, "R%02d=%08x", i, env->regs[i]);
-        if ((i % 4) == 3) {
-            qemu_fprintf(f, "\n");
-        } else {
-            qemu_fprintf(f, " ");
-        }
-    }
-
-    if (arm_feature(env, ARM_FEATURE_M)) {
-        uint32_t xpsr = xpsr_read(env);
-        const char *mode;
-        const char *ns_status = "";
-
-        if (arm_feature(env, ARM_FEATURE_M_SECURITY)) {
-            ns_status = env->v7m.secure ? "S " : "NS ";
-        }
-
-        if (xpsr & XPSR_EXCP) {
-            mode = "handler";
-        } else {
-            if (env->v7m.control[env->v7m.secure] & R_V7M_CONTROL_NPRIV_MASK) {
-                mode = "unpriv-thread";
-            } else {
-                mode = "priv-thread";
-            }
-        }
-
-        qemu_fprintf(f, "XPSR=%08x %c%c%c%c %c %s%s\n",
-                     xpsr,
-                     xpsr & XPSR_N ? 'N' : '-',
-                     xpsr & XPSR_Z ? 'Z' : '-',
-                     xpsr & XPSR_C ? 'C' : '-',
-                     xpsr & XPSR_V ? 'V' : '-',
-                     xpsr & XPSR_T ? 'T' : 'A',
-                     ns_status,
-                     mode);
-    } else {
-        uint32_t psr = cpsr_read(env);
-        const char *ns_status = "";
-
-        if (arm_feature(env, ARM_FEATURE_EL3) &&
-            (psr & CPSR_M) != ARM_CPU_MODE_MON) {
-            ns_status = env->cp15.scr_el3 & SCR_NS ? "NS " : "S ";
-        }
-
-        qemu_fprintf(f, "PSR=%08x %c%c%c%c %c %s%s%d\n",
-                     psr,
-                     psr & CPSR_N ? 'N' : '-',
-                     psr & CPSR_Z ? 'Z' : '-',
-                     psr & CPSR_C ? 'C' : '-',
-                     psr & CPSR_V ? 'V' : '-',
-                     psr & CPSR_T ? 'T' : 'A',
-                     ns_status,
-                     aarch32_mode_name(psr), (psr & 0x10) ? 32 : 26);
-    }
-
-    if (flags & CPU_DUMP_FPU) {
-        int numvfpregs = 0;
-        if (arm_feature(env, ARM_FEATURE_VFP)) {
-            numvfpregs += 16;
-        }
-        if (arm_feature(env, ARM_FEATURE_VFP3)) {
-            numvfpregs += 16;
-        }
-        for (i = 0; i < numvfpregs; i++) {
-            uint64_t v = *aa32_vfp_dreg(env, i);
-            qemu_fprintf(f, "s%02d=%08x s%02d=%08x d%02d=%016" PRIx64 "\n",
-                         i * 2, (uint32_t)v,
-                         i * 2 + 1, (uint32_t)(v >> 32),
-                         i, v);
-        }
-        qemu_fprintf(f, "FPSCR: %08x\n", vfp_get_fpscr(env));
-    }
-}
-
 void restore_state_to_opc(CPUARMState *env, TranslationBlock *tb,
                           target_ulong *data)
 {
-- 
2.20.1

From: Philippe Mathieu-Daudé <philmd@redhat.com>

In the next commit we will split the TLB related routines of
this file, and this function will also be called in the new
file. Declare it in the "internals.h" header.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190701132516.26392-12-philmd@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/internals.h | 16 ++++++++++++++++
 target/arm/helper.c    | 21 +++++----------------
 2 files changed, 21 insertions(+), 16 deletions(-)

diff --git a/target/arm/internals.h b/target/arm/internals.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/internals.h
+++ b/target/arm/internals.h
@@ -XXX,XX +XXX,XX @@ static inline int exception_target_el(CPUARMState *env)
     return target_el;
 }
 
+#ifndef CONFIG_USER_ONLY
+
+/* Cacheability and shareability attributes for a memory access */
+typedef struct ARMCacheAttrs {
+    unsigned int attrs:8; /* as in the MAIR register encoding */
+    unsigned int shareability:2; /* as in the SH field of the VMSAv8-64 PTEs */
+} ARMCacheAttrs;
+
+bool get_phys_addr(CPUARMState *env, target_ulong address,
+                   MMUAccessType access_type, ARMMMUIdx mmu_idx,
+                   hwaddr *phys_ptr, MemTxAttrs *attrs, int *prot,
+                   target_ulong *page_size,
+                   ARMMMUFaultInfo *fi, ARMCacheAttrs *cacheattrs);
+
+#endif /* !CONFIG_USER_ONLY */
+
 #endif
diff --git a/target/arm/helper.c b/target/arm/helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -XXX,XX +XXX,XX @@
 #define ARM_CPU_FREQ 1000000000 /* FIXME: 1 GHz, should be configurable */
 
 #ifndef CONFIG_USER_ONLY
-/* Cacheability and shareability attributes for a memory access */
-typedef struct ARMCacheAttrs {
-    unsigned int attrs:8; /* as in the MAIR register encoding */
-    unsigned int shareability:2; /* as in the SH field of the VMSAv8-64 PTEs */
-} ARMCacheAttrs;
-
-static bool get_phys_addr(CPUARMState *env, target_ulong address,
-                          MMUAccessType access_type, ARMMMUIdx mmu_idx,
-                          hwaddr *phys_ptr, MemTxAttrs *attrs, int *prot,
-                          target_ulong *page_size,
-                          ARMMMUFaultInfo *fi, ARMCacheAttrs *cacheattrs);
 
 static bool get_phys_addr_lpae(CPUARMState *env, target_ulong address,
                                MMUAccessType access_type, ARMMMUIdx mmu_idx,
@@ -XXX,XX +XXX,XX @@ static ARMCacheAttrs combine_cacheattrs(ARMCacheAttrs s1, ARMCacheAttrs s2)
  * @fi: set to fault info if the translation fails
  * @cacheattrs: (if non-NULL) set to the cacheability/shareability attributes
  */
-static bool get_phys_addr(CPUARMState *env, target_ulong address,
-                          MMUAccessType access_type, ARMMMUIdx mmu_idx,
-                          hwaddr *phys_ptr, MemTxAttrs *attrs, int *prot,
-                          target_ulong *page_size,
-                          ARMMMUFaultInfo *fi, ARMCacheAttrs *cacheattrs)
+bool get_phys_addr(CPUARMState *env, target_ulong address,
+                   MMUAccessType access_type, ARMMMUIdx mmu_idx,
+                   hwaddr *phys_ptr, MemTxAttrs *attrs, int *prot,
+                   target_ulong *page_size,
+                   ARMMMUFaultInfo *fi, ARMCacheAttrs *cacheattrs)
 {
     if (mmu_idx == ARMMMUIdx_S12NSE0 || mmu_idx == ARMMMUIdx_S12NSE1) {
         /* Call ourselves recursively to do the stage 1 and then stage 2
-- 
2.20.1

From: Philippe Mathieu-Daudé <philmd@redhat.com>

These routines are TCG specific.
The arm_deliver_fault() function is only used within the new
helper. Make it static.

Suggested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190701132516.26392-13-philmd@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/Makefile.objs |   1 +
 target/arm/internals.h   |   3 -
 target/arm/cpu.c         |   6 +-
 target/arm/helper.c      |  53 -----------
 target/arm/op_helper.c   | 135 --------------------------
 target/arm/tlb_helper.c  | 200 +++++++++++++++++++++++++++++++++++++++
 6 files changed, 205 insertions(+), 193 deletions(-)
 create mode 100644 target/arm/tlb_helper.c

diff --git a/target/arm/Makefile.objs b/target/arm/Makefile.objs
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/Makefile.objs
+++ b/target/arm/Makefile.objs
@@ -XXX,XX +XXX,XX @@ target/arm/translate-sve.o: target/arm/decode-sve.inc.c
 target/arm/translate.o: target/arm/decode-vfp.inc.c
 target/arm/translate.o: target/arm/decode-vfp-uncond.inc.c
 
+obj-y += tlb_helper.o
 obj-y += translate.o op_helper.o
 obj-y += crypto_helper.o
 obj-y += iwmmxt_helper.o vec_helper.o neon_helper.o
diff --git a/target/arm/internals.h b/target/arm/internals.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/internals.h
+++ b/target/arm/internals.h
@@ -XXX,XX +XXX,XX @@ bool arm_cpu_tlb_fill(CPUState *cs, vaddr address, int size,
                       MMUAccessType access_type, int mmu_idx,
                       bool probe, uintptr_t retaddr);
 
-void arm_deliver_fault(ARMCPU *cpu, vaddr addr, MMUAccessType access_type,
-                       int mmu_idx, ARMMMUFaultInfo *fi) QEMU_NORETURN;
-
 /* Return true if the stage 1 translation regime is using LPAE format page
  * tables */
 bool arm_s1_regime_using_lpae_format(CPUARMState *env, ARMMMUIdx mmu_idx);
diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -XXX,XX +XXX,XX @@ static void arm_cpu_class_init(ObjectClass *oc, void *data)
     cc->gdb_write_register = arm_cpu_gdb_write_register;
 #ifndef CONFIG_USER_ONLY
     cc->do_interrupt = arm_cpu_do_interrupt;
-    cc->do_unaligned_access = arm_cpu_do_unaligned_access;
-    cc->do_transaction_failed = arm_cpu_do_transaction_failed;
     cc->get_phys_page_attrs_debug = arm_cpu_get_phys_page_attrs_debug;
     cc->asidx_from_attrs = arm_asidx_from_attrs;
     cc->vmsd = &vmstate_arm_cpu;
@@ -XXX,XX +XXX,XX @@ static void arm_cpu_class_init(ObjectClass *oc, void *data)
 #ifdef CONFIG_TCG
     cc->tcg_initialize = arm_translate_init;
     cc->tlb_fill = arm_cpu_tlb_fill;
+#if !defined(CONFIG_USER_ONLY)
+    cc->do_unaligned_access = arm_cpu_do_unaligned_access;
+    cc->do_transaction_failed = arm_cpu_do_transaction_failed;
+#endif /* CONFIG_TCG && !CONFIG_USER_ONLY */
 #endif
 }
 
diff --git a/target/arm/helper.c b/target/arm/helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op)
 
 #endif
 
-bool arm_cpu_tlb_fill(CPUState *cs, vaddr address, int size,
-                      MMUAccessType access_type, int mmu_idx,
-                      bool probe, uintptr_t retaddr)
-{
-    ARMCPU *cpu = ARM_CPU(cs);
-
-#ifdef CONFIG_USER_ONLY
-    cpu->env.exception.vaddress = address;
-    if (access_type == MMU_INST_FETCH) {
-        cs->exception_index = EXCP_PREFETCH_ABORT;
-    } else {
-        cs->exception_index = EXCP_DATA_ABORT;
-    }
-    cpu_loop_exit_restore(cs, retaddr);
-#else
-    hwaddr phys_addr;
-    target_ulong page_size;
-    int prot, ret;
-    MemTxAttrs attrs = {};
-    ARMMMUFaultInfo fi = {};
-
-    /*
-     * Walk the page table and (if the mapping exists) add the page
-     * to the TLB.  On success, return true.  Otherwise, if probing,
-     * return false.  Otherwise populate fsr with ARM DFSR/IFSR fault
-     * register format, and signal the fault.
-     */
-    ret = get_phys_addr(&cpu->env, address, access_type,
-                        core_to_arm_mmu_idx(&cpu->env, mmu_idx),
-                        &phys_addr, &attrs, &prot, &page_size, &fi, NULL);
-    if (likely(!ret)) {
-        /*
-         * Map a single [sub]page. Regions smaller than our declared
-         * target page size are handled specially, so for those we
-         * pass in the exact addresses.
-         */
-        if (page_size >= TARGET_PAGE_SIZE) {
-            phys_addr &= TARGET_PAGE_MASK;
-            address &= TARGET_PAGE_MASK;
-        }
-        tlb_set_page_with_attrs(cs, address, phys_addr, attrs,
-                                prot, mmu_idx, page_size);
-        return true;
-    } else if (probe) {
-        return false;
-    } else {
-        /* now we have a real cpu fault */
-        cpu_restore_state(cs, retaddr, true);
-        arm_deliver_fault(cpu, address, access_type, mmu_idx, &fi);
-    }
-#endif
-}
-
 /* Note that signed overflow is undefined in C.  The following routines are
    careful to use unsigned types where modulo arithmetic is required.
    Failure to do so _will_ break on newer gcc.  */
diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/op_helper.c
+++ b/target/arm/op_helper.c
@@ -XXX,XX +XXX,XX @@ uint32_t HELPER(neon_tbl)(uint32_t ireg, uint32_t def, void *vn,
     return val;
 }
 
-#if !defined(CONFIG_USER_ONLY)
-
-static inline uint32_t merge_syn_data_abort(uint32_t template_syn,
-                                            unsigned int target_el,
-                                            bool same_el, bool ea,
-                                            bool s1ptw, bool is_write,
-                                            int fsc)
-{
-    uint32_t syn;
-
-    /*
-     * ISV is only set for data aborts routed to EL2 and
-     * never for stage-1 page table walks faulting on stage 2.
-     *
-     * Furthermore, ISV is only set for certain kinds of load/stores.
-     * If the template syndrome does not have ISV set, we should leave
-     * it cleared.
-     *
-     * See ARMv8 specs, D7-1974:
-     * ISS encoding for an exception from a Data Abort, the
-     * ISV field.
-     */
-    if (!(template_syn & ARM_EL_ISV) || target_el != 2 || s1ptw) {
-        syn = syn_data_abort_no_iss(same_el,
-                                    ea, 0, s1ptw, is_write, fsc);
-    } else {
-        /*
-         * Fields: IL, ISV, SAS, SSE, SRT, SF and AR come from the template
-         * syndrome created at translation time.
-         * Now we create the runtime syndrome with the remaining fields.
-         */
-        syn = syn_data_abort_with_iss(same_el,
-                                      0, 0, 0, 0, 0,
-                                      ea, 0, s1ptw, is_write, fsc,
-                                      false);
-        /* Merge the runtime syndrome with the template syndrome.  */
-        syn |= template_syn;
-    }
-    return syn;
-}
-
-void arm_deliver_fault(ARMCPU *cpu, vaddr addr, MMUAccessType access_type,
-                       int mmu_idx, ARMMMUFaultInfo *fi)
-{
-    CPUARMState *env = &cpu->env;
-    int target_el;
-    bool same_el;
-    uint32_t syn, exc, fsr, fsc;
-    ARMMMUIdx arm_mmu_idx = core_to_arm_mmu_idx(env, mmu_idx);
-
-    target_el = exception_target_el(env);
-    if (fi->stage2) {
-        target_el = 2;
-        env->cp15.hpfar_el2 = extract64(fi->s2addr, 12, 47) << 4;
-    }
-    same_el = (arm_current_el(env) == target_el);
-
-    if (target_el == 2 || arm_el_is_aa64(env, target_el) ||
-        arm_s1_regime_using_lpae_format(env, arm_mmu_idx)) {
-        /*
-         * LPAE format fault status register : bottom 6 bits are
-         * status code in the same form as needed for syndrome
-         */
-        fsr = arm_fi_to_lfsc(fi);
-        fsc = extract32(fsr, 0, 6);
-    } else {
-        fsr = arm_fi_to_sfsc(fi);
-        /*
-         * Short format FSR : this fault will never actually be reported
-         * to an EL that uses a syndrome register. Use a (currently)
-         * reserved FSR code in case the constructed syndrome does leak
-         * into the guest somehow.
-         */
-        fsc = 0x3f;
-    }
-
-    if (access_type == MMU_INST_FETCH) {
-        syn = syn_insn_abort(same_el, fi->ea, fi->s1ptw, fsc);
-        exc = EXCP_PREFETCH_ABORT;
-    } else {
-        syn = merge_syn_data_abort(env->exception.syndrome, target_el,
-                                   same_el, fi->ea, fi->s1ptw,
-                                   access_type == MMU_DATA_STORE,
-                                   fsc);
-        if (access_type == MMU_DATA_STORE
-            && arm_feature(env, ARM_FEATURE_V6)) {
-            fsr |= (1 << 11);
-        }
-        exc = EXCP_DATA_ABORT;
-    }
-
-    env->exception.vaddress = addr;
-    env->exception.fsr = fsr;
-    raise_exception(env, exc, syn, target_el);
-}
-
-/* Raise a data fault alignment exception for the specified virtual address */
-void arm_cpu_do_unaligned_access(CPUState *cs, vaddr vaddr,
-                                 MMUAccessType access_type,
-                                 int mmu_idx, uintptr_t retaddr)
-{
-    ARMCPU *cpu = ARM_CPU(cs);
-    ARMMMUFaultInfo fi = {};
-
-    /* now we have a real cpu fault */
-    cpu_restore_state(cs, retaddr, true);
-
-    fi.type = ARMFault_Alignment;
-    arm_deliver_fault(cpu, vaddr, access_type, mmu_idx, &fi);
-}
-
-/*
- * arm_cpu_do_transaction_failed: handle a memory system error response
- * (eg "no device/memory present at address") by raising an external abort
- * exception
- */
-void arm_cpu_do_transaction_failed(CPUState *cs, hwaddr physaddr,
-                                   vaddr addr, unsigned size,
-                                   MMUAccessType access_type,
-                                   int mmu_idx, MemTxAttrs attrs,
-                                   MemTxResult response, uintptr_t retaddr)
-{
-    ARMCPU *cpu = ARM_CPU(cs);
-    ARMMMUFaultInfo fi = {};
-
-    /* now we have a real cpu fault */
-    cpu_restore_state(cs, retaddr, true);
-
-    fi.ea = arm_extabort_type(response);
-    fi.type = ARMFault_SyncExternal;
-    arm_deliver_fault(cpu, addr, access_type, mmu_idx, &fi);
-}
-
-#endif /* !defined(CONFIG_USER_ONLY) */
-
 void HELPER(v8m_stackcheck)(CPUARMState *env, uint32_t newvalue)
 {
     /*
diff --git a/target/arm/tlb_helper.c b/target/arm/tlb_helper.c
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/target/arm/tlb_helper.c
@@ -XXX,XX +XXX,XX @@
+/*
+ * ARM TLB (Translation lookaside buffer) helpers.
+ *
+ * This code is licensed under the GNU GPL v2 or later.
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+#include "qemu/osdep.h"
+#include "cpu.h"
+#include "internals.h"
+#include "exec/exec-all.h"
+
+#if !defined(CONFIG_USER_ONLY)
+
+static inline uint32_t merge_syn_data_abort(uint32_t template_syn,
+                                            unsigned int target_el,
+                                            bool same_el, bool ea,
+                                            bool s1ptw, bool is_write,
+                                            int fsc)
+{
+    uint32_t syn;
+
+    /*
+     * ISV is only set for data aborts routed to EL2 and
+     * never for stage-1 page table walks faulting on stage 2.
+     *
+     * Furthermore, ISV is only set for certain kinds of load/stores.
+     * If the template syndrome does not have ISV set, we should leave
+     * it cleared.
+     *
+     * See ARMv8 specs, D7-1974:
+     * ISS encoding for an exception from a Data Abort, the
+     * ISV field.
+     */
+    if (!(template_syn & ARM_EL_ISV) || target_el != 2 || s1ptw) {
+        syn = syn_data_abort_no_iss(same_el,
+                                    ea, 0, s1ptw, is_write, fsc);
+    } else {
+        /*
+         * Fields: IL, ISV, SAS, SSE, SRT, SF and AR come from the template
+         * syndrome created at translation time.
+         * Now we create the runtime syndrome with the remaining fields.
+         */
+        syn = syn_data_abort_with_iss(same_el,
+                                      0, 0, 0, 0, 0,
+                                      ea, 0, s1ptw, is_write, fsc,
+                                      false);
+        /* Merge the runtime syndrome with the template syndrome.  */
+        syn |= template_syn;
+    }
+    return syn;
+}
+
+static void QEMU_NORETURN arm_deliver_fault(ARMCPU *cpu, vaddr addr,
+                                            MMUAccessType access_type,
+                                            int mmu_idx, ARMMMUFaultInfo *fi)
+{
+    CPUARMState *env = &cpu->env;
+    int target_el;
+    bool same_el;
+    uint32_t syn, exc, fsr, fsc;
+    ARMMMUIdx arm_mmu_idx = core_to_arm_mmu_idx(env, mmu_idx);
+
+    target_el = exception_target_el(env);
+    if (fi->stage2) {
+        target_el = 2;
+        env->cp15.hpfar_el2 = extract64(fi->s2addr, 12, 47) << 4;
+    }
+    same_el = (arm_current_el(env) == target_el);
+
+    if (target_el == 2 || arm_el_is_aa64(env, target_el) ||
+        arm_s1_regime_using_lpae_format(env, arm_mmu_idx)) {
+        /*
+         * LPAE format fault status register : bottom 6 bits are
+         * status code in the same form as needed for syndrome
+         */
+        fsr = arm_fi_to_lfsc(fi);
+        fsc = extract32(fsr, 0, 6);
+    } else {
+        fsr = arm_fi_to_sfsc(fi);
+        /*
+         * Short format FSR : this fault will never actually be reported
+         * to an EL that uses a syndrome register. Use a (currently)
+         * reserved FSR code in case the constructed syndrome does leak
+         * into the guest somehow.
+         */
+        fsc = 0x3f;
+    }
+
+    if (access_type == MMU_INST_FETCH) {
+        syn = syn_insn_abort(same_el, fi->ea, fi->s1ptw, fsc);
+        exc = EXCP_PREFETCH_ABORT;
+    } else {
+        syn = merge_syn_data_abort(env->exception.syndrome, target_el,
+                                   same_el, fi->ea, fi->s1ptw,
+                                   access_type == MMU_DATA_STORE,
+                                   fsc);
+        if (access_type == MMU_DATA_STORE
+            && arm_feature(env, ARM_FEATURE_V6)) {
+            fsr |= (1 << 11);
+        }
+        exc = EXCP_DATA_ABORT;
+    }
+
+    env->exception.vaddress = addr;
+    env->exception.fsr = fsr;
+    raise_exception(env, exc, syn, target_el);
+}
+
+/* Raise a data fault alignment exception for the specified virtual address */
+void arm_cpu_do_unaligned_access(CPUState *cs, vaddr vaddr,
+                                 MMUAccessType access_type,
+                                 int mmu_idx, uintptr_t retaddr)
+{
+    ARMCPU *cpu = ARM_CPU(cs);
+    ARMMMUFaultInfo fi = {};
+
+    /* now we have a real cpu fault */
+    cpu_restore_state(cs, retaddr, true);
+
+    fi.type = ARMFault_Alignment;
+    arm_deliver_fault(cpu, vaddr, access_type, mmu_idx, &fi);
+}
+
+/*
+ * arm_cpu_do_transaction_failed: handle a memory system error response
+ * (eg "no device/memory present at address") by raising an external abort
+ * exception
+ */
+void arm_cpu_do_transaction_failed(CPUState *cs, hwaddr physaddr,
+                                   vaddr addr, unsigned size,
+                                   MMUAccessType access_type,
+                                   int mmu_idx, MemTxAttrs attrs,
+                                   MemTxResult response, uintptr_t retaddr)
+{
+    ARMCPU *cpu = ARM_CPU(cs);
+    ARMMMUFaultInfo fi = {};
+
+    /* now we have a real cpu fault */
+    cpu_restore_state(cs, retaddr, true);
+
+    fi.ea = arm_extabort_type(response);
+    fi.type = ARMFault_SyncExternal;
+    arm_deliver_fault(cpu, addr, access_type, mmu_idx, &fi);
+}
+
+#endif /* !defined(CONFIG_USER_ONLY) */
+
+bool arm_cpu_tlb_fill(CPUState *cs, vaddr address, int size,
+                      MMUAccessType access_type, int mmu_idx,
+                      bool probe, uintptr_t retaddr)
+{
+    ARMCPU *cpu = ARM_CPU(cs);
+
+#ifdef CONFIG_USER_ONLY
+    cpu->env.exception.vaddress = address;
+    if (access_type == MMU_INST_FETCH) {
+        cs->exception_index = EXCP_PREFETCH_ABORT;
+    } else {
+        cs->exception_index = EXCP_DATA_ABORT;
+    }
+    cpu_loop_exit_restore(cs, retaddr);
+#else
+    hwaddr phys_addr;
+    target_ulong page_size;
+    int prot, ret;
+    MemTxAttrs attrs = {};
+    ARMMMUFaultInfo fi = {};
+
+    /*
+     * Walk the page table and (if the mapping exists) add the page
+     * to the TLB.  On success, return true.  Otherwise, if probing,
+     * return false.  Otherwise populate fsr with ARM DFSR/IFSR fault
+     * register format, and signal the fault.
+     */
+    ret = get_phys_addr(&cpu->env, address, access_type,
+                        core_to_arm_mmu_idx(&cpu->env, mmu_idx),
+                        &phys_addr, &attrs, &prot, &page_size, &fi, NULL);
+    if (likely(!ret)) {
+        /*
+         * Map a single [sub]page. Regions smaller than our declared
+         * target page size are handled specially, so for those we
+         * pass in the exact addresses.
+         */
+        if (page_size >= TARGET_PAGE_SIZE) {
+            phys_addr &= TARGET_PAGE_MASK;
+            address &= TARGET_PAGE_MASK;
+        }
+        tlb_set_page_with_attrs(cs, address, phys_addr, attrs,
+                                prot, mmu_idx, page_size);
+        return true;
+    } else if (probe) {
+        return false;
+    } else {
+        /* now we have a real cpu fault */
+        cpu_restore_state(cs, retaddr, true);
+        arm_deliver_fault(cpu, address, access_type, mmu_idx, &fi);
+    }
+#endif
+}
-- 
2.20.1

From: Philippe Mathieu-Daudé <philmd@redhat.com>

To ease the review of the next commit,
move the vfp_exceptbits_to_host() function directly after
vfp_exceptbits_from_host().  Amusingly the diff shows we
are moving vfp_get_fpscr().

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190701132516.26392-15-philmd@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/vfp_helper.c | 52 ++++++++++++++++++++---------------------
 1 file changed, 26 insertions(+), 26 deletions(-)

From: Philippe Mathieu-Daudé <philmd@redhat.com>

The vfp_set_fpscr() helper contains code specific to the host
floating point implementation (here the SoftFloat library).
Extract this code to vfp_set_fpscr_to_host().

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190701132516.26392-16-philmd@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/vfp_helper.c | 127 +++++++++++++++++++++-------------------
 1 file changed, 66 insertions(+), 61 deletions(-)

diff --git a/target/arm/vfp_helper.c b/target/arm/vfp_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/vfp_helper.c
+++ b/target/arm/vfp_helper.c
@@ -XXX,XX +XXX,XX @@ static inline int vfp_exceptbits_to_host(int target_bits)
     return host_bits;
 }
 
-uint32_t HELPER(vfp_get_fpscr)(CPUARMState *env)
-{
-    uint32_t i, fpscr;
-
-    fpscr = env->vfp.xregs[ARM_VFP_FPSCR]
-            | (env->vfp.vec_len << 16)
-            | (env->vfp.vec_stride << 20);
-
-    i = get_float_exception_flags(&env->vfp.fp_status);
-    i |= get_float_exception_flags(&env->vfp.standard_fp_status);
-    /* FZ16 does not generate an input denormal exception.  */
-    i |= (get_float_exception_flags(&env->vfp.fp_status_f16)
-          & ~float_flag_input_denormal);
-    fpscr |= vfp_exceptbits_from_host(i);
-
-    i = env->vfp.qc[0] | env->vfp.qc[1] | env->vfp.qc[2] | env->vfp.qc[3];
-    fpscr |= i ? FPCR_QC : 0;
-
-    return fpscr;
-}
-
-uint32_t vfp_get_fpscr(CPUARMState *env)
-{
-    return HELPER(vfp_get_fpscr)(env);
-}
-
-void HELPER(vfp_set_fpscr)(CPUARMState *env, uint32_t val)
+static void vfp_set_fpscr_to_host(CPUARMState *env, uint32_t val)
 {
     int i;
     uint32_t changed = env->vfp.xregs[ARM_VFP_FPSCR];
 
-    /* When ARMv8.2-FP16 is not supported, FZ16 is RES0.  */
-    if (!cpu_isar_feature(aa64_fp16, env_archcpu(env))) {
-        val &= ~FPCR_FZ16;
-    }
-
-    if (arm_feature(env, ARM_FEATURE_M)) {
-        /*
-         * M profile FPSCR is RES0 for the QC, STRIDE, FZ16, LEN bits
-         * and also for the trapped-exception-handling bits IxE.
-         */
-        val &= 0xf7c0009f;
-    }
-
-    /*
-     * We don't implement trapped exception handling, so the
-     * trap enable bits, IDE|IXE|UFE|OFE|DZE|IOE are all RAZ/WI (not RES0!)
-     *
-     * If we exclude the exception flags, IOC|DZC|OFC|UFC|IXC|IDC
-     * (which are stored in fp_status), and the other RES0 bits
-     * in between, then we clear all of the low 16 bits.
-     */
-    env->vfp.xregs[ARM_VFP_FPSCR] = val & 0xf7c80000;
-    env->vfp.vec_len = (val >> 16) & 7;
-    env->vfp.vec_stride = (val >> 20) & 3;
-
-    /*
-     * The bit we set within fpscr_q is arbitrary; the register as a
-     * whole being zero/non-zero is what counts.
-     */
-    env->vfp.qc[0] = val & FPCR_QC;
-    env->vfp.qc[1] = 0;
-    env->vfp.qc[2] = 0;
-    env->vfp.qc[3] = 0;
-
     changed ^= val;
     if (changed & (3 << 22)) {
         i = (val >> 22) & 3;
@@ -XXX,XX +XXX,XX @@ void HELPER(vfp_set_fpscr)(CPUARMState *env, uint32_t val)
     set_float_exception_flags(0, &env->vfp.standard_fp_status);
 }
 
+uint32_t HELPER(vfp_get_fpscr)(CPUARMState *env)
+{
+    uint32_t i, fpscr;
+
+    fpscr = env->vfp.xregs[ARM_VFP_FPSCR]
+            | (env->vfp.vec_len << 16)
+            | (env->vfp.vec_stride << 20);
+
+    i = get_float_exception_flags(&env->vfp.fp_status);
+    i |= get_float_exception_flags(&env->vfp.standard_fp_status);
+    /* FZ16 does not generate an input denormal exception.  */
+    i |= (get_float_exception_flags(&env->vfp.fp_status_f16)
+          & ~float_flag_input_denormal);
+    fpscr |= vfp_exceptbits_from_host(i);
+
+    i = env->vfp.qc[0] | env->vfp.qc[1] | env->vfp.qc[2] | env->vfp.qc[3];
+    fpscr |= i ? FPCR_QC : 0;
+
+    return fpscr;
+}
+
+uint32_t vfp_get_fpscr(CPUARMState *env)
+{
+    return HELPER(vfp_get_fpscr)(env);
+}
+
+void HELPER(vfp_set_fpscr)(CPUARMState *env, uint32_t val)
+{
+    /* When ARMv8.2-FP16 is not supported, FZ16 is RES0.  */
+    if (!cpu_isar_feature(aa64_fp16, env_archcpu(env))) {
+        val &= ~FPCR_FZ16;
+    }
+
+    if (arm_feature(env, ARM_FEATURE_M)) {
+        /*
+         * M profile FPSCR is RES0 for the QC, STRIDE, FZ16, LEN bits
+         * and also for the trapped-exception-handling bits IxE.
+         */
+        val &= 0xf7c0009f;
+    }
+
+    /*
+     * We don't implement trapped exception handling, so the
+     * trap enable bits, IDE|IXE|UFE|OFE|DZE|IOE are all RAZ/WI (not RES0!)
+     *
+     * If we exclude the exception flags, IOC|DZC|OFC|UFC|IXC|IDC
+     * (which are stored in fp_status), and the other RES0 bits
+     * in between, then we clear all of the low 16 bits.
+     */
+    env->vfp.xregs[ARM_VFP_FPSCR] = val & 0xf7c80000;
+    env->vfp.vec_len = (val >> 16) & 7;
+    env->vfp.vec_stride = (val >> 20) & 3;
+
+    /*
+     * The bit we set within fpscr_q is arbitrary; the register as a
+     * whole being zero/non-zero is what counts.
+     */
+    env->vfp.qc[0] = val & FPCR_QC;
+    env->vfp.qc[1] = 0;
+    env->vfp.qc[2] = 0;
+    env->vfp.qc[3] = 0;
+
+    vfp_set_fpscr_to_host(env, val);
+}
+
 void vfp_set_fpscr(CPUARMState *env, uint32_t val)
 {
     HELPER(vfp_set_fpscr)(env, val);
-- 
2.20.1

From: Philippe Mathieu-Daudé <philmd@redhat.com>

The vfp_set_fpscr() helper contains code specific to the host
floating point implementation (here the SoftFloat library).
Extract this code to vfp_set_fpscr_from_host().

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190701132516.26392-17-philmd@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/vfp_helper.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

From: Philippe Mathieu-Daudé <philmd@redhat.com>

This code is specific to the SoftFloat floating-point
implementation, which is only used by TCG.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190701132516.26392-18-philmd@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/vfp_helper.c | 26 +++++++++++++++++++++++---
 1 file changed, 23 insertions(+), 3 deletions(-)

diff --git a/target/arm/vfp_helper.c b/target/arm/vfp_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/vfp_helper.c
+++ b/target/arm/vfp_helper.c
@@ -XXX,XX +XXX,XX @@
  */
 
 #include "qemu/osdep.h"
-#include "qemu/log.h"
 #include "cpu.h"
 #include "exec/helper-proto.h"
-#include "fpu/softfloat.h"
 #include "internals.h"
-
+#ifdef CONFIG_TCG
+#include "qemu/log.h"
+#include "fpu/softfloat.h"
+#endif
 
 /* VFP support.  We follow the convention used for VFP instructions:
    Single precision routines have a "s" suffix, double precision a
    "d" suffix.  */
 
+#ifdef CONFIG_TCG
+
 /* Convert host exception flags to vfp form.  */
 static inline int vfp_exceptbits_from_host(int host_bits)
 {
@@ -XXX,XX +XXX,XX @@ static void vfp_set_fpscr_to_host(CPUARMState *env, uint32_t val)
     set_float_exception_flags(0, &env->vfp.standard_fp_status);
 }
 
+#else
+
+static uint32_t vfp_get_fpscr_from_host(CPUARMState *env)
+{
+    return 0;
+}
+
+static void vfp_set_fpscr_to_host(CPUARMState *env, uint32_t val)
+{
+}
+
+#endif
+
 uint32_t HELPER(vfp_get_fpscr)(CPUARMState *env)
 {
     uint32_t i, fpscr;
@@ -XXX,XX +XXX,XX @@ void vfp_set_fpscr(CPUARMState *env, uint32_t val)
     HELPER(vfp_set_fpscr)(env, val);
 }
 
+#ifdef CONFIG_TCG
+
 #define VFP_HELPER(name, p) HELPER(glue(glue(vfp_,name),p))
 
 #define VFP_BINOP(name) \
@@ -XXX,XX +XXX,XX @@ float64 HELPER(frint64_d)(float64 f, void *fpst)
 {
     return frint_d(f, fpst, 64);
 }
+
+#endif
-- 
2.20.1

From: Philippe Mathieu-Daudé <philmd@redhat.com>

Under KVM, the kernel gets the HVC call and handle the PSCI requests.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190701132516.26392-20-philmd@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/internals.h | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/target/arm/internals.h b/target/arm/internals.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/internals.h
+++ b/target/arm/internals.h
@@ -XXX,XX +XXX,XX @@ vaddr arm_adjust_watchpoint_address(CPUState *cs, vaddr addr, int len);
 /* Callback function for when a watchpoint or breakpoint triggers. */
 void arm_debug_excp_handler(CPUState *cs);
 
-#ifdef CONFIG_USER_ONLY
+#if defined(CONFIG_USER_ONLY) || !defined(CONFIG_TCG)
 static inline bool arm_is_psci_call(ARMCPU *cpu, int excp_type)
 {
     return false;
 }
+static inline void arm_handle_psci_call(ARMCPU *cpu)
+{
+    g_assert_not_reached();
+}
 #else
 /* Return true if the r0/x0 value indicates that this SMC/HVC is a PSCI call. */
 bool arm_is_psci_call(ARMCPU *cpu, int excp_type);
-- 
2.20.1

From: Philippe Mathieu-Daudé <philmd@redhat.com>

In few commits we will split the M-profile functions from this
file, and this function will also be called in the new file.
Declare it in the "internals.h" header.
Since it is in the middle of a block of M profile functions,
move it previous to this block to ease the later refactor.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190701132516.26392-21-philmd@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/internals.h |  2 ++
 target/arm/helper.c    | 76 +++++++++++++++++++++---------------------
 2 files changed, 40 insertions(+), 38 deletions(-)

diff --git a/target/arm/internals.h b/target/arm/internals.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/internals.h
+++ b/target/arm/internals.h
@@ -XXX,XX +XXX,XX @@ bool get_phys_addr(CPUARMState *env, target_ulong address,
                    target_ulong *page_size,
                    ARMMMUFaultInfo *fi, ARMCacheAttrs *cacheattrs);
 
+void arm_log_exception(int idx);
+
 #endif /* !CONFIG_USER_ONLY */
 
 #endif
diff --git a/target/arm/helper.c b/target/arm/helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -XXX,XX +XXX,XX @@ uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx,
     return target_el;
 }
 
+void arm_log_exception(int idx)
+{
+    if (qemu_loglevel_mask(CPU_LOG_INT)) {
+        const char *exc = NULL;
+        static const char * const excnames[] = {
+            [EXCP_UDEF] = "Undefined Instruction",
+            [EXCP_SWI] = "SVC",
+            [EXCP_PREFETCH_ABORT] = "Prefetch Abort",
+            [EXCP_DATA_ABORT] = "Data Abort",
+            [EXCP_IRQ] = "IRQ",
+            [EXCP_FIQ] = "FIQ",
+            [EXCP_BKPT] = "Breakpoint",
+            [EXCP_EXCEPTION_EXIT] = "QEMU v7M exception exit",
+            [EXCP_KERNEL_TRAP] = "QEMU intercept of kernel commpage",
+            [EXCP_HVC] = "Hypervisor Call",
+            [EXCP_HYP_TRAP] = "Hypervisor Trap",
+            [EXCP_SMC] = "Secure Monitor Call",
+            [EXCP_VIRQ] = "Virtual IRQ",
+            [EXCP_VFIQ] = "Virtual FIQ",
+            [EXCP_SEMIHOST] = "Semihosting call",
+            [EXCP_NOCP] = "v7M NOCP UsageFault",
+            [EXCP_INVSTATE] = "v7M INVSTATE UsageFault",
+            [EXCP_STKOF] = "v8M STKOF UsageFault",
+            [EXCP_LAZYFP] = "v7M exception during lazy FP stacking",
+            [EXCP_LSERR] = "v8M LSERR UsageFault",
+            [EXCP_UNALIGNED] = "v7M UNALIGNED UsageFault",
+        };
+
+        if (idx >= 0 && idx < ARRAY_SIZE(excnames)) {
+            exc = excnames[idx];
+        }
+        if (!exc) {
+            exc = "unknown";
+        }
+        qemu_log_mask(CPU_LOG_INT, "Taking exception %d [%s]\n", idx, exc);
+    }
+}
+
 /*
  * Return true if the v7M CPACR permits access to the FPU for the specified
  * security state and privilege level.
@@ -XXX,XX +XXX,XX @@ static bool do_v7m_function_return(ARMCPU *cpu)
     return true;
 }
 
-static void arm_log_exception(int idx)
-{
-    if (qemu_loglevel_mask(CPU_LOG_INT)) {
-        const char *exc = NULL;
-        static const char * const excnames[] = {
-            [EXCP_UDEF] = "Undefined Instruction",
-            [EXCP_SWI] = "SVC",
-            [EXCP_PREFETCH_ABORT] = "Prefetch Abort",
-            [EXCP_DATA_ABORT] = "Data Abort",
-            [EXCP_IRQ] = "IRQ",
-            [EXCP_FIQ] = "FIQ",
-            [EXCP_BKPT] = "Breakpoint",
-            [EXCP_EXCEPTION_EXIT] = "QEMU v7M exception exit",
-            [EXCP_KERNEL_TRAP] = "QEMU intercept of kernel commpage",
-            [EXCP_HVC] = "Hypervisor Call",
-            [EXCP_HYP_TRAP] = "Hypervisor Trap",
-            [EXCP_SMC] = "Secure Monitor Call",
-            [EXCP_VIRQ] = "Virtual IRQ",
-            [EXCP_VFIQ] = "Virtual FIQ",
-            [EXCP_SEMIHOST] = "Semihosting call",
-            [EXCP_NOCP] = "v7M NOCP UsageFault",
-            [EXCP_INVSTATE] = "v7M INVSTATE UsageFault",
-            [EXCP_STKOF] = "v8M STKOF UsageFault",
-            [EXCP_LAZYFP] = "v7M exception during lazy FP stacking",
-            [EXCP_LSERR] = "v8M LSERR UsageFault",
-            [EXCP_UNALIGNED] = "v7M UNALIGNED UsageFault",
-        };
-
-        if (idx >= 0 && idx < ARRAY_SIZE(excnames)) {
-            exc = excnames[idx];
-        }
-        if (!exc) {
-            exc = "unknown";
-        }
-        qemu_log_mask(CPU_LOG_INT, "Taking exception %d [%s]\n", idx, exc);
-    }
-}
-
 static bool v7m_read_half_insn(ARMCPU *cpu, ARMMMUIdx mmu_idx,
                                uint32_t addr, uint16_t *insn)
 {
-- 
2.20.1

From: Philippe Mathieu-Daudé <philmd@redhat.com>

In the next commit we will split the M-profile functions from this
file. Some function will be called out of helper.c. Declare them in
the "internals.h" header.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190701132516.26392-22-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/internals.h | 42 ++++++++++++++++++++++++++++++++++++++++++
 target/arm/helper.c    | 38 ++------------------------------------
 2 files changed, 44 insertions(+), 36 deletions(-)

diff --git a/target/arm/internals.h b/target/arm/internals.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/internals.h
+++ b/target/arm/internals.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t v7m_sp_limit(CPUARMState *env)
     }
 }
 
+/**
+ * v7m_cpacr_pass:
+ * Return true if the v7M CPACR permits access to the FPU for the specified
+ * security state and privilege level.
+ */
+static inline bool v7m_cpacr_pass(CPUARMState *env,
+                                  bool is_secure, bool is_priv)
+{
+    switch (extract32(env->v7m.cpacr[is_secure], 20, 2)) {
+    case 0:
+    case 2: /* UNPREDICTABLE: we treat like 0 */
+        return false;
+    case 1:
+        return is_priv;
+    case 3:
+        return true;
+    default:
+        g_assert_not_reached();
+    }
+}
+
 /**
  * aarch32_mode_name(): Return name of the AArch32 CPU mode
  * @psr: Program Status Register indicating CPU mode
@@ -XXX,XX +XXX,XX @@ static inline int exception_target_el(CPUARMState *env)
 
 #ifndef CONFIG_USER_ONLY
 
+/* Security attributes for an address, as returned by v8m_security_lookup. */
+typedef struct V8M_SAttributes {
+    bool subpage; /* true if these attrs don't cover the whole TARGET_PAGE */
+    bool ns;
+    bool nsc;
+    uint8_t sregion;
+    bool srvalid;
+    uint8_t iregion;
+    bool irvalid;
+} V8M_SAttributes;
+
+void v8m_security_lookup(CPUARMState *env, uint32_t address,
+                         MMUAccessType access_type, ARMMMUIdx mmu_idx,
+                         V8M_SAttributes *sattrs);
+
+bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address,
+                       MMUAccessType access_type, ARMMMUIdx mmu_idx,
+                       hwaddr *phys_ptr, MemTxAttrs *txattrs,
+                       int *prot, bool *is_subpage,
+                       ARMMMUFaultInfo *fi, uint32_t *mregion);
+
 /* Cacheability and shareability attributes for a memory access */
 typedef struct ARMCacheAttrs {
     unsigned int attrs:8; /* as in the MAIR register encoding */
diff --git a/target/arm/helper.c b/target/arm/helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_lpae(CPUARMState *env, target_ulong address,
                                hwaddr *phys_ptr, MemTxAttrs *txattrs, int *prot,
                                target_ulong *page_size_ptr,
                                ARMMMUFaultInfo *fi, ARMCacheAttrs *cacheattrs);
-
-/* Security attributes for an address, as returned by v8m_security_lookup. */
-typedef struct V8M_SAttributes {
-    bool subpage; /* true if these attrs don't cover the whole TARGET_PAGE */
-    bool ns;
-    bool nsc;
-    uint8_t sregion;
-    bool srvalid;
-    uint8_t iregion;
-    bool irvalid;
-} V8M_SAttributes;
-
-static void v8m_security_lookup(CPUARMState *env, uint32_t address,
-                                MMUAccessType access_type, ARMMMUIdx mmu_idx,
-                                V8M_SAttributes *sattrs);
 #endif
 
 static void switch_mode(CPUARMState *env, int mode);
@@ -XXX,XX +XXX,XX @@ void arm_log_exception(int idx)
     }
 }
 
-/*
- * Return true if the v7M CPACR permits access to the FPU for the specified
- * security state and privilege level.
- */
-static bool v7m_cpacr_pass(CPUARMState *env, bool is_secure, bool is_priv)
-{
-    switch (extract32(env->v7m.cpacr[is_secure], 20, 2)) {
-    case 0:
-    case 2: /* UNPREDICTABLE: we treat like 0 */
-        return false;
-    case 1:
-        return is_priv;
-    case 3:
-        return true;
-    default:
-        g_assert_not_reached();
-    }
-}
-
 /*
  * What kind of stack write are we doing? This affects how exceptions
  * generated during the stacking are treated.
@@ -XXX,XX +XXX,XX @@ static bool v8m_is_sau_exempt(CPUARMState *env,
         (address >= 0xe00ff000 && address <= 0xe00fffff);
 }
 
-static void v8m_security_lookup(CPUARMState *env, uint32_t address,
+void v8m_security_lookup(CPUARMState *env, uint32_t address,
                                 MMUAccessType access_type, ARMMMUIdx mmu_idx,
                                 V8M_SAttributes *sattrs)
 {
@@ -XXX,XX +XXX,XX @@ static void v8m_security_lookup(CPUARMState *env, uint32_t address,
     }
 }
 
-static bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address,
+bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address,
                               MMUAccessType access_type, ARMMMUIdx mmu_idx,
                               hwaddr *phys_ptr, MemTxAttrs *txattrs,
                               int *prot, bool *is_subpage,
-- 
2.20.1

Hi; here's a target-arm pullreq. Apologies for the size: this is
because it has all RTH's work to enable emulation of SME2p1 and
SVE2p1.

thanks
-- PMM

The following changes since commit c77283dd5d79149f4e7e9edd00f65416c648ee59:

Merge tag 'pull-request-2025-07-02' of https://gitlab.com/thuth/qemu into staging (2025-07-03 06:01:41 -0400)

are available in the Git repository at:

https://gitlab.com/pm215/qemu.git tags/pull-target-arm-20250704

for you to fetch changes up to 083fef73585dfa03f72055ace6de8dec4912d0b0:

linux-user/aarch64: Set hwcap bits for SME2p1/SVE2p1 (2025-07-04 15:53:23 +0100)

----------------------------------------------------------------
target-arm queue:
 * Implement emulation of SME2p1 and SVE2p1
 * Correctly enforce alignment checks for v8M loads and
   stores done via helper functions
 * Mark the "highbank" and the "midway" machine as deprecated

----------------------------------------------------------------
Peter Maydell (4):
      target/arm: Rename FMOPA_h to FMOPA_w_h
      target/arm: Rename BFMOPA to BFMOPA_w
      target/arm: Implement FMOPA (non-widening) for fp16
      target/arm: Implement SME2 BFMOPA (non-widening)

Richard Henderson (103):
      target/arm: Fix SME vs AdvSIMD exception priority
      target/arm: Fix sve_access_check for SME
      target/arm: Fix 128-bit element ZIP, UZP, TRN
      target/arm: Replace @rda_rn_rm_e0 in sve.decode
      target/arm: Fix FMMLA (64-bit element) for 128-bit VL
      target/arm: Disable FEAT_F64MM if maximum SVE vector size too small
      target/arm: Fix PSEL size operands to tcg_gen_gvec_ands
      target/arm: Fix f16_dotadd vs nan selection
      target/arm: Fix bfdotadd_ebf vs nan selection
      target/arm: Remove CPUARMState.vfp.scratch
      target/arm: Introduce FPST_ZA, FPST_ZA_F16
      target/arm: Use FPST_ZA for sme_fmopa_[hsd]
      target/arm: Rename zarray to za_state.za
      target/arm: Add isar feature tests for SME2p1, SVE2p1
      target/arm: Add ZT0
      target/arm: Add zt0_excp_el to DisasContext
      target/arm: Implement SME2 ZERO ZT0
      target/arm: Add alignment argument to gen_sve_{ldr, str}
      target/arm: Implement SME2 LDR/STR ZT0
      target/arm: Implement SME2 MOVT
      target/arm: Split get_tile_rowcol argument tile_index
      target/arm: Rename MOVA for translate
      target/arm: Split out get_zarray
      target/arm: Introduce ARMCPU.sme_max_vq
      target/arm: Implement SME2 MOVA to/from tile, multiple registers
      target/arm: Implement SME2 MOVA to/from array, multiple registers
      target/arm: Implement SME2 BMOPA
      target/arm: Implement SME2 SMOPS, UMOPS (2-way)
      target/arm: Introduce gen_gvec_sve2_sqdmulh
      target/arm: Implement SME2 Multiple and Single SVE Destructive
      target/arm: Implement SME2 Multiple Vectors SVE Destructive
      target/arm: Implement SME2 ADD/SUB (array results, multiple and single vector)
      target/arm: Implement SME2 ADD/SUB (array results, multiple vectors)
      target/arm: Pass ZA to helper_sve2_fmlal_zz[zx]w_s
      target/arm: Add helper_gvec{_ah}_bfmlsl{_nx}
      target/arm: Implement SME2 FMLAL, BFMLAL
      target/arm: Implement SME2 FDOT
      target/arm: Implement SME2 BFDOT
      target/arm: Implement SME2 FVDOT, BFVDOT
      target/arm: Rename helper_gvec_*dot_[bh] to *_4[bh]
      target/arm: Implemement SME2 SDOT, UDOT, USDOT, SUDOT
      target/arm: Rename SVE SDOT and UDOT patterns
      target/arm: Tighten USDOT (vectors) decode
      target/arm: Implement SDOT, UDOT (2-way) for SME2/SVE2p1
      target/arm: Implement SME2 SVDOT, UVDOT, SUVDOT, USVDOT
      target/arm: Implement SME2 SMLAL, SMLSL, UMLAL, UMLSL
      target/arm: Rename gvec_fml[as]_[hs] with _nf_ infix
      target/arm: Implement SME2 FMLA, FMLS
      target/arm: Implement SME2 BFMLA, BFMLS
      target/arm: Implement SME2 FADD, FSUB, BFADD, BFSUB
      target/arm: Implement SME2 ADD/SUB (array accumulator)
      target/arm: Implement SME2 BFCVT, BFCVTN, FCVT, FCVTN
      target/arm: Implement SME2 FCVT (widening), FCVTL
      target/arm: Implement SME2 FCVTZS, FCVTZU
      target/arm: Implement SME2 SCVTF, UCVTF
      target/arm: Implement SME2 FRINTN, FRINTP, FRINTM, FRINTA
      target/arm: Introduce do_[us]sat_[bhs] macros
      target/arm: Use do_[us]sat_[bhs] in sve_helper.c
      target/arm: Implement SME2 SQCVT, UQCVT, SQCVTU
      target/arm: Implement SQCVTN, UQCVTN, SQCVTUN for SME2/SVE2p1
      target/arm: Implement SME2 SUNPK, UUNPK
      target/arm: Implement SME2 ZIP, UZP (four registers)
      target/arm: Move do_urshr, do_srshr to vec_internal.h
      target/arm: Implement SME2 SQRSHR, UQRSHR, SQRSHRN
      target/arm: Implement SME2 ZIP, UZP (two registers)
      target/arm: Implement SME2 FCLAMP, SCLAMP, UCLAMP
      target/arm: Enable SCLAMP, UCLAMP for SVE2p1
      target/arm: Implement FCLAMP for SME2, SVE2p1
      target/arm: Implement SME2p1 Multiple Zero
      target/arm: Introduce pred_count_test
      target/arm: Fold predtest_ones into helper_sve_brkns
      target/arm: Expand do_zero inline
      target/arm: Split out do_whilel from helper_sve_whilel
      target/arm: Split out do_whileg from helper_sve_whileg
      target/arm: Move scale by esz into helper_sve_while*
      target/arm: Split trans_WHILE to lt and gt
      target/arm: Enable PSEL for SVE2p1
      target/arm: Implement SVE2p1 WHILE (predicate pair)
      target/arm: Implement SVE2p1 WHILE (predicate as counter)
      target/arm: Implement SVE2p1 PTRUE (predicate as counter)
      target/arm: Implement {ADD, SMIN, SMAX, UMIN, UMAX}QV for SVE2p1
      target/arm: Implement SVE2p1 PEXT
      target/arm: Implement SME2 SEL
      target/arm: Implement ANDQV, ORQV, EORQV for SVE2p1
      target/arm: Implement FADDQV, F{MIN, MAX}{NM}QV for SVE2p1
      target/arm: Implement BFMLSLB{L, T} for SME2/SVE2p1
      target/arm: Implement CNTP (predicate as counter) for SME2/SVE2p1
      target/arm: Implement DUPQ for SME2p1/SVE2p1
      target/arm: Implement EXTQ for SME2p1/SVE2p1
      target/arm: Implement PMOV for SME2p1/SVE2p1
      target/arm: Implement ZIPQ, UZPQ for SME2p1/SVE2p1
      target/arm: Implement TBLQ, TBXQ for SME2p1/SVE2p1
      target/arm: Implement SME2 counted predicate register load/store
      target/arm: Split the ST_zpri and ST_zprr patterns
      target/arm: Implement {LD1, ST1}{W, D} (128-bit element) for SVE2p1
      target/arm: Move ld1qq and st1qq primitives to sve_ldst_internal.h
      target/arm: Implement {LD, ST}[234]Q for SME2p1/SVE2p1
      target/arm: Implement LD1Q, ST1Q for SVE2p1
      target/arm: Implement MOVAZ for SME2p1
      target/arm: Implement LUTI2, LUTI4 for SME2/SME2p1
      target/arm: Support FPCR.AH in SME FMOPS, BFMOPS
      target/arm: Enable FEAT_SME2p1 on -cpu max
      linux-user/aarch64: Set hwcap bits for SME2p1/SVE2p1

Thomas Huth (1):
      hw/arm/highbank: Mark the "highbank" and the "midway" machine as deprecated

William Kosasih (11):
      target/arm: Bring VLSTM/VLLDM helper store/load closer to the ARM pseudocode
      target/arm: Fix BLXNS helper store alignment checks
      target/arm: Fix function_return helper load alignment checks
      target/arm: Fix VLDR helper load alignment checks
      target/arm: Fix VSTR helper store alignment checks
      target/arm: Fix VLDR_SG helper load alignment checks
      target/arm: Fix VSTR_SG helper store alignment checks
      target/arm: Fix VLD4 helper load alignment checks
      target/arm: Fix VLD2 helper load alignment checks
      target/arm: Fix VST4 helper store alignment checks
      target/arm: Fix VST2 helper store alignment checks

From: Thomas Huth <thuth@redhat.com>

We don't have any automatic regression tests for these machines and
when asking the usual suspects on the mailing list we came to the
conclusion that nobody tests these machines manually, too, so it seems
like this is currently just completely unused code. Mark them as depre-
cated to see whether anybody still speaks up during the deprecation
period, otherwise we can likely remove these two machines in a couple
of releases.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20250702113051.46483-1-thuth@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweaked deprecation.rst text]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 docs/about/deprecated.rst | 7 +++++++
 hw/arm/highbank.c         | 2 ++
 2 files changed, 9 insertions(+)

diff --git a/docs/about/deprecated.rst b/docs/about/deprecated.rst
index XXXXXXX..XXXXXXX 100644
--- a/docs/about/deprecated.rst
+++ b/docs/about/deprecated.rst
@@ -XXX,XX +XXX,XX @@ they want to use and avoids confusion.  Existing users of the ``spike``
 machine must ensure that they're setting the ``spike`` machine in the
 command line (``-M spike``).
 
+Arm ``highbank`` and ``midway`` machines (since 10.1)
+'''''''''''''''''''''''''''''''''''''''''''''''''''''
+
+There are no known users left for these machines (if you still use it,
+please write a mail to the qemu-devel mailing list). If you just want to
+boot a Cortex-A15 or Cortex-A9 Linux, use the ``virt`` machine instead.
+
 
 System emulator binaries
 ------------------------
diff --git a/hw/arm/highbank.c b/hw/arm/highbank.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/highbank.c
+++ b/hw/arm/highbank.c
@@ -XXX,XX +XXX,XX @@ static void highbank_class_init(ObjectClass *oc, const void *data)
     mc->max_cpus = 4;
     mc->ignore_memory_transaction_failures = true;
     mc->default_ram_id = "highbank.dram";
+    mc->deprecation_reason = "no known users left for this machine";
 }
 
 static const TypeInfo highbank_type = {
@@ -XXX,XX +XXX,XX @@ static void midway_class_init(ObjectClass *oc, const void *data)
     mc->max_cpus = 4;
     mc->ignore_memory_transaction_failures = true;
     mc->default_ram_id = "highbank.dram";
+    mc->deprecation_reason = "no known users left for this machine";
 }
 
 static const TypeInfo midway_type = {
-- 
2.43.0

From: William Kosasih <kosasihwilliam4@gmail.com>

This patch brings the VLSTM and VLLDM helper functions closer to the ARM
pseudocode by adding MO_ALIGN to the MemOpIdx of the associated store
(`cpu_stl_mmu`) operations and load (`cpu_ldl_mmu`) operations.

Note that this is not a bug fix: an 8-byte alignment check already exists
and remains in place, enforcing stricter alignment than the 4 bytes
requirement in the individual loads and stores. This change merely makes the
helper implementations closer to the ARM pseudocode.

That said, as a side effect, the MMU index is now resolved once instead of
on every `cpu_*_data_ra` call, reducing redundant lookups

Signed-off-by: William Kosasih <kosasihwilliam4@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250703085604.154449-2-kosasihwilliam4@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/m_helper.c | 24 +++++++++++++++---------
 1 file changed, 15 insertions(+), 9 deletions(-)

diff --git a/target/arm/tcg/m_helper.c b/target/arm/tcg/m_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/m_helper.c
+++ b/target/arm/tcg/m_helper.c
@@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr)
     bool s = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK;
     bool lspact = env->v7m.fpccr[s] & R_V7M_FPCCR_LSPACT_MASK;
     uintptr_t ra = GETPC();
+    ARMMMUIdx mmu_idx = arm_mmu_idx(env);
+    MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN,
+                                 arm_to_core_mmu_idx(mmu_idx));
 
     assert(env->v7m.secure);
 
@@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr)
      * Note that we do not use v7m_stack_write() here, because the
      * accesses should not set the FSR bits for stacking errors if they
      * fail. (In pseudocode terms, they are AccType_NORMAL, not AccType_STACK
-     * or AccType_LAZYFP). Faults in cpu_stl_data_ra() will throw exceptions
+     * or AccType_LAZYFP). Faults in cpu_stl_mmu() will throw exceptions
      * and longjmp out.
      */
     if (!(env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPEN_MASK)) {
@@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr)
             if (i >= 16) {
                 faddr += 8; /* skip the slot for the FPSCR */
             }
-            cpu_stl_data_ra(env, faddr, slo, ra);
-            cpu_stl_data_ra(env, faddr + 4, shi, ra);
+            cpu_stl_mmu(env, faddr, slo, oi, ra);
+            cpu_stl_mmu(env, faddr + 4, shi, oi, ra);
         }
-        cpu_stl_data_ra(env, fptr + 0x40, vfp_get_fpscr(env), ra);
+        cpu_stl_mmu(env, fptr + 0x40, vfp_get_fpscr(env), oi, ra);
         if (cpu_isar_feature(aa32_mve, cpu)) {
-            cpu_stl_data_ra(env, fptr + 0x44, env->v7m.vpr, ra);
+            cpu_stl_mmu(env, fptr + 0x44, env->v7m.vpr, oi, ra);
         }
 
         /*
@@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlldm)(CPUARMState *env, uint32_t fptr)
 {
     ARMCPU *cpu = env_archcpu(env);
     uintptr_t ra = GETPC();
+    ARMMMUIdx mmu_idx = arm_mmu_idx(env);
+    MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN,
+                                 arm_to_core_mmu_idx(mmu_idx));
 
     /* fptr is the value of Rn, the frame pointer we load the FP regs from */
     assert(env->v7m.secure);
@@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlldm)(CPUARMState *env, uint32_t fptr)
                 faddr += 8; /* skip the slot for the FPSCR and VPR */
             }
 
-            slo = cpu_ldl_data_ra(env, faddr, ra);
-            shi = cpu_ldl_data_ra(env, faddr + 4, ra);
+            slo = cpu_ldl_mmu(env, faddr, oi, ra);
+            shi = cpu_ldl_mmu(env, faddr + 4, oi, ra);
 
             dn = (uint64_t) shi << 32 | slo;
             *aa32_vfp_dreg(env, i / 2) = dn;
         }
-        fpscr = cpu_ldl_data_ra(env, fptr + 0x40, ra);
+        fpscr = cpu_ldl_mmu(env, fptr + 0x40, oi, ra);
         vfp_set_fpscr(env, fpscr);
         if (cpu_isar_feature(aa32_mve, cpu)) {
-            env->v7m.vpr = cpu_ldl_data_ra(env, fptr + 0x44, ra);
+            env->v7m.vpr = cpu_ldl_mmu(env, fptr + 0x44, oi, ra);
         }
     }
 
-- 
2.43.0

From: William Kosasih <kosasihwilliam4@gmail.com>

This patch adds alignment checks in the store operations (when stacking the
return pc and psr) in the BLXNS instruction.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1154
Signed-off-by: William Kosasih <kosasihwilliam4@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250703085604.154449-3-kosasihwilliam4@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/m_helper.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/target/arm/tcg/m_helper.c b/target/arm/tcg/m_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/m_helper.c
+++ b/target/arm/tcg/m_helper.c
@@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest)
     }
 
     /* Note that these stores can throw exceptions on MPU faults */
-    cpu_stl_data_ra(env, sp, nextinst, GETPC());
-    cpu_stl_data_ra(env, sp + 4, saved_psr, GETPC());
+    ARMMMUIdx mmu_idx = arm_mmu_idx(env);
+    MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN,
+                                 arm_to_core_mmu_idx(mmu_idx));
+    cpu_stl_mmu(env, sp, nextinst, oi, GETPC());
+    cpu_stl_mmu(env, sp + 4, saved_psr, oi, GETPC());
 
     env->regs[13] = sp;
     env->regs[14] = 0xfeffffff;
-- 
2.43.0

From: William Kosasih <kosasihwilliam4@gmail.com>

This patch adds alignment checks in the load operations (when unstacking the
return pc and psr) in the FunctionReturn pseudocode.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1154
Signed-off-by: William Kosasih <kosasihwilliam4@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250703085604.154449-4-kosasihwilliam4@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/m_helper.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/target/arm/tcg/m_helper.c b/target/arm/tcg/m_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/m_helper.c
+++ b/target/arm/tcg/m_helper.c
@@ -XXX,XX +XXX,XX @@ static bool do_v7m_function_return(ARMCPU *cpu)
          * do them as secure, so work out what MMU index that is.
          */
         mmu_idx = arm_v7m_mmu_idx_for_secstate(env, true);
-        oi = make_memop_idx(MO_LEUL, arm_to_core_mmu_idx(mmu_idx));
+        oi = make_memop_idx(MO_LEUL | MO_ALIGN, arm_to_core_mmu_idx(mmu_idx));
         newpc = cpu_ldl_mmu(env, frameptr, oi, 0);
         newpsr = cpu_ldl_mmu(env, frameptr + 4, oi, 0);
 
-- 
2.43.0

From: William Kosasih <kosasihwilliam4@gmail.com>

This patch adds alignment checks in the load operations in the VLDR
instruction.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1154
Signed-off-by: William Kosasih <kosasihwilliam4@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250703085604.154449-5-kosasihwilliam4@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/mve_helper.c | 24 +++++++++++++-----------
 1 file changed, 13 insertions(+), 11 deletions(-)

From: William Kosasih <kosasihwilliam4@gmail.com>

This patch adds alignment checks in the store operations in the VSTR
instruction.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1154
Signed-off-by: William Kosasih <kosasihwilliam4@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250703085604.154449-6-kosasihwilliam4@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/mve_helper.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/mve_helper.c
+++ b/target/arm/tcg/mve_helper.c
@@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env)
         mve_advance_vpt(env);                                           \
     }
 
-#define DO_VSTR(OP, MSIZE, STTYPE, ESIZE, TYPE)                         \
+#define DO_VSTR(OP, MFLAG, MSIZE, STTYPE, ESIZE, TYPE)                  \
     void HELPER(mve_##OP)(CPUARMState *env, void *vd, uint32_t addr)    \
     {                                                                   \
         TYPE *d = vd;                                                   \
         uint16_t mask = mve_element_mask(env);                          \
         unsigned b, e;                                                  \
+        int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
+        MemOpIdx oi = make_memop_idx(MFLAG | MO_ALIGN, mmu_idx);        \
         for (b = 0, e = 0; b < 16; b += ESIZE, e++) {                   \
             if (mask & (1 << b)) {                                      \
-                cpu_##STTYPE##_data_ra(env, addr, d[H##ESIZE(e)], GETPC()); \
+                cpu_##STTYPE##_mmu(env, addr, d[H##ESIZE(e)], oi, GETPC()); \
             }                                                           \
             addr += MSIZE;                                              \
         }                                                               \
@@ -XXX,XX +XXX,XX @@ DO_VLDR(vldrb, MO_UB, 1, uint8_t, ldb, 1, uint8_t)
 DO_VLDR(vldrh, MO_TEUW, 2, uint16_t, ldw, 2, uint16_t)
 DO_VLDR(vldrw, MO_TEUL, 4, uint32_t, ldl, 4, uint32_t)
 
-DO_VSTR(vstrb, 1, stb, 1, uint8_t)
-DO_VSTR(vstrh, 2, stw, 2, uint16_t)
-DO_VSTR(vstrw, 4, stl, 4, uint32_t)
+DO_VSTR(vstrb, MO_UB, 1, stb, 1, uint8_t)
+DO_VSTR(vstrh, MO_TEUW, 2, stw, 2, uint16_t)
+DO_VSTR(vstrw, MO_TEUL, 4, stl, 4, uint32_t)
 
 DO_VLDR(vldrb_sh, MO_SB, 1, int8_t, ldb, 2, int16_t)
 DO_VLDR(vldrb_sw, MO_SB, 1, int8_t, ldb, 4, int32_t)
@@ -XXX,XX +XXX,XX @@ DO_VLDR(vldrb_uw, MO_UB, 1, uint8_t, ldb, 4, uint32_t)
 DO_VLDR(vldrh_sw, MO_TESW, 2, int16_t, ldw, 4, int32_t)
 DO_VLDR(vldrh_uw, MO_TEUW, 2, uint16_t, ldw, 4, uint32_t)
 
-DO_VSTR(vstrb_h, 1, stb, 2, int16_t)
-DO_VSTR(vstrb_w, 1, stb, 4, int32_t)
-DO_VSTR(vstrh_w, 2, stw, 4, int32_t)
+DO_VSTR(vstrb_h, MO_UB, 1, stb, 2, int16_t)
+DO_VSTR(vstrb_w, MO_UB, 1, stb, 4, int32_t)
+DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t)
 
 #undef DO_VLDR
 #undef DO_VSTR
-- 
2.43.0

From: William Kosasih <kosasihwilliam4@gmail.com>

This patch adds alignment checks in the load operations in the VLDR_SG
instructions.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1154
Signed-off-by: William Kosasih <kosasihwilliam4@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250703085604.154449-7-kosasihwilliam4@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/mve_helper.c | 42 ++++++++++++++++++++++---------------
 1 file changed, 25 insertions(+), 17 deletions(-)

diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/mve_helper.c
+++ b/target/arm/tcg/mve_helper.c
@@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t)
  * For loads, predicated lanes are zeroed instead of retaining
  * their previous values.
  */
-#define DO_VLDR_SG(OP, LDTYPE, ESIZE, TYPE, OFFTYPE, ADDRFN, WB)        \
+#define DO_VLDR_SG(OP, MFLAG, MTYPE, LDTYPE, ESIZE, TYPE, OFFTYPE, ADDRFN, WB)\
     void HELPER(mve_##OP)(CPUARMState *env, void *vd, void *vm,         \
                           uint32_t base)                                \
     {                                                                   \
@@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t)
         uint16_t eci_mask = mve_eci_mask(env);                          \
         unsigned e;                                                     \
         uint32_t addr;                                                  \
+        int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
+        MemOpIdx oi = make_memop_idx(MFLAG | MO_ALIGN, mmu_idx);        \
         for (e = 0; e < 16 / ESIZE; e++, mask >>= ESIZE, eci_mask >>= ESIZE) { \
             if (!(eci_mask & 1)) {                                      \
                 continue;                                               \
             }                                                           \
             addr = ADDRFN(base, m[H##ESIZE(e)]);                        \
             d[H##ESIZE(e)] = (mask & 1) ?                               \
-                cpu_##LDTYPE##_data_ra(env, addr, GETPC()) : 0;         \
+                (MTYPE)cpu_##LDTYPE##_mmu(env, addr, oi, GETPC()) : 0;  \
             if (WB) {                                                   \
                 m[H##ESIZE(e)] = addr;                                  \
             }                                                           \
@@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t)
         uint16_t eci_mask = mve_eci_mask(env);                          \
         unsigned e;                                                     \
         uint32_t addr;                                                  \
+        int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
+        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
         for (e = 0; e < 16 / 4; e++, mask >>= 4, eci_mask >>= 4) {      \
             if (!(eci_mask & 1)) {                                      \
                 continue;                                               \
             }                                                           \
             addr = ADDRFN(base, m[H4(e & ~1)]);                         \
             addr += 4 * (e & 1);                                        \
-            d[H4(e)] = (mask & 1) ? cpu_ldl_data_ra(env, addr, GETPC()) : 0; \
+            d[H4(e)] = (mask & 1) ? cpu_ldl_mmu(env, addr, oi, GETPC()) : 0; \
             if (WB && (e & 1)) {                                        \
                 m[H4(e & ~1)] = addr - 4;                               \
             }                                                           \
@@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t)
 #define ADDR_ADD_OSW(BASE, OFFSET) ((BASE) + ((OFFSET) << 2))
 #define ADDR_ADD_OSD(BASE, OFFSET) ((BASE) + ((OFFSET) << 3))
 
-DO_VLDR_SG(vldrb_sg_sh, ldsb, 2, int16_t, uint16_t, ADDR_ADD, false)
-DO_VLDR_SG(vldrb_sg_sw, ldsb, 4, int32_t, uint32_t, ADDR_ADD, false)
-DO_VLDR_SG(vldrh_sg_sw, ldsw, 4, int32_t, uint32_t, ADDR_ADD, false)
+DO_VLDR_SG(vldrb_sg_sh, MO_SB, int8_t, ldb, 2, int16_t, uint16_t, ADDR_ADD, false)
+DO_VLDR_SG(vldrb_sg_sw, MO_SB, int8_t, ldb, 4, int32_t, uint32_t, ADDR_ADD, false)
+DO_VLDR_SG(vldrh_sg_sw, MO_TESW, int16_t, ldw, 4, int32_t, uint32_t, ADDR_ADD, false)
 
-DO_VLDR_SG(vldrb_sg_ub, ldub, 1, uint8_t, uint8_t, ADDR_ADD, false)
-DO_VLDR_SG(vldrb_sg_uh, ldub, 2, uint16_t, uint16_t, ADDR_ADD, false)
-DO_VLDR_SG(vldrb_sg_uw, ldub, 4, uint32_t, uint32_t, ADDR_ADD, false)
-DO_VLDR_SG(vldrh_sg_uh, lduw, 2, uint16_t, uint16_t, ADDR_ADD, false)
-DO_VLDR_SG(vldrh_sg_uw, lduw, 4, uint32_t, uint32_t, ADDR_ADD, false)
-DO_VLDR_SG(vldrw_sg_uw, ldl, 4, uint32_t, uint32_t, ADDR_ADD, false)
+DO_VLDR_SG(vldrb_sg_ub, MO_UB, uint8_t, ldb, 1, uint8_t, uint8_t, ADDR_ADD, false)
+DO_VLDR_SG(vldrb_sg_uh, MO_UB, uint8_t, ldb, 2, uint16_t, uint16_t, ADDR_ADD, false)
+DO_VLDR_SG(vldrb_sg_uw, MO_UB, uint8_t, ldb, 4, uint32_t, uint32_t, ADDR_ADD, false)
+DO_VLDR_SG(vldrh_sg_uh, MO_TEUW, uint16_t, ldw, 2, uint16_t, uint16_t, ADDR_ADD, false)
+DO_VLDR_SG(vldrh_sg_uw, MO_TEUW, uint16_t, ldw, 4, uint32_t, uint32_t, ADDR_ADD, false)
+DO_VLDR_SG(vldrw_sg_uw, MO_TEUL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD, false)
 DO_VLDR64_SG(vldrd_sg_ud, ADDR_ADD, false)
 
-DO_VLDR_SG(vldrh_sg_os_sw, ldsw, 4, int32_t, uint32_t, ADDR_ADD_OSH, false)
-DO_VLDR_SG(vldrh_sg_os_uh, lduw, 2, uint16_t, uint16_t, ADDR_ADD_OSH, false)
-DO_VLDR_SG(vldrh_sg_os_uw, lduw, 4, uint32_t, uint32_t, ADDR_ADD_OSH, false)
-DO_VLDR_SG(vldrw_sg_os_uw, ldl, 4, uint32_t, uint32_t, ADDR_ADD_OSW, false)
+DO_VLDR_SG(vldrh_sg_os_sw, MO_TESW, int16_t, ldw, 4,
+           int32_t, uint32_t, ADDR_ADD_OSH, false)
+DO_VLDR_SG(vldrh_sg_os_uh, MO_TEUW, uint16_t, ldw, 2,
+           uint16_t, uint16_t, ADDR_ADD_OSH, false)
+DO_VLDR_SG(vldrh_sg_os_uw, MO_TEUW, uint16_t, ldw, 4,
+           uint32_t, uint32_t, ADDR_ADD_OSH, false)
+DO_VLDR_SG(vldrw_sg_os_uw, MO_TEUL, uint32_t, ldl, 4,
+           uint32_t, uint32_t, ADDR_ADD_OSW, false)
 DO_VLDR64_SG(vldrd_sg_os_ud, ADDR_ADD_OSD, false)
 
 DO_VSTR_SG(vstrb_sg_ub, stb, 1, uint8_t, ADDR_ADD, false)
@@ -XXX,XX +XXX,XX @@ DO_VSTR_SG(vstrh_sg_os_uw, stw, 4, uint32_t, ADDR_ADD_OSH, false)
 DO_VSTR_SG(vstrw_sg_os_uw, stl, 4, uint32_t, ADDR_ADD_OSW, false)
 DO_VSTR64_SG(vstrd_sg_os_ud, ADDR_ADD_OSD, false)
 
-DO_VLDR_SG(vldrw_sg_wb_uw, ldl, 4, uint32_t, uint32_t, ADDR_ADD, true)
+DO_VLDR_SG(vldrw_sg_wb_uw, MO_TEUL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD, true)
 DO_VLDR64_SG(vldrd_sg_wb_ud, ADDR_ADD, true)
 DO_VSTR_SG(vstrw_sg_wb_uw, stl, 4, uint32_t, ADDR_ADD, true)
 DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true)
-- 
2.43.0

From: William Kosasih <kosasihwilliam4@gmail.com>

This patch adds alignment checks in the store operations in the VSTR_SG
instructions.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1154
Signed-off-by: William Kosasih <kosasihwilliam4@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250703085604.154449-8-kosasihwilliam4@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/mve_helper.c | 30 +++++++++++++++++-------------
 1 file changed, 17 insertions(+), 13 deletions(-)

diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/mve_helper.c
+++ b/target/arm/tcg/mve_helper.c
@@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t)
     }
 
 /* We know here TYPE is unsigned so always the same as the offset type */
-#define DO_VSTR_SG(OP, STTYPE, ESIZE, TYPE, ADDRFN, WB)                 \
+#define DO_VSTR_SG(OP, MFLAG, STTYPE, ESIZE, TYPE, ADDRFN, WB)          \
     void HELPER(mve_##OP)(CPUARMState *env, void *vd, void *vm,         \
                           uint32_t base)                                \
     {                                                                   \
@@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t)
         uint16_t eci_mask = mve_eci_mask(env);                          \
         unsigned e;                                                     \
         uint32_t addr;                                                  \
+        int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
+        MemOpIdx oi = make_memop_idx(MFLAG | MO_ALIGN, mmu_idx);        \
         for (e = 0; e < 16 / ESIZE; e++, mask >>= ESIZE, eci_mask >>= ESIZE) { \
             if (!(eci_mask & 1)) {                                      \
                 continue;                                               \
             }                                                           \
             addr = ADDRFN(base, m[H##ESIZE(e)]);                        \
             if (mask & 1) {                                             \
-                cpu_##STTYPE##_data_ra(env, addr, d[H##ESIZE(e)], GETPC()); \
+                cpu_##STTYPE##_mmu(env, addr, d[H##ESIZE(e)], oi, GETPC()); \
             }                                                           \
             if (WB) {                                                   \
                 m[H##ESIZE(e)] = addr;                                  \
@@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t)
         uint16_t eci_mask = mve_eci_mask(env);                          \
         unsigned e;                                                     \
         uint32_t addr;                                                  \
+        int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
+        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
         for (e = 0; e < 16 / 4; e++, mask >>= 4, eci_mask >>= 4) {      \
             if (!(eci_mask & 1)) {                                      \
                 continue;                                               \
@@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t)
             addr = ADDRFN(base, m[H4(e & ~1)]);                         \
             addr += 4 * (e & 1);                                        \
             if (mask & 1) {                                             \
-                cpu_stl_data_ra(env, addr, d[H4(e)], GETPC());          \
+                cpu_stl_mmu(env, addr, d[H4(e)], oi, GETPC());          \
             }                                                           \
             if (WB && (e & 1)) {                                        \
                 m[H4(e & ~1)] = addr - 4;                               \
@@ -XXX,XX +XXX,XX @@ DO_VLDR_SG(vldrw_sg_os_uw, MO_TEUL, uint32_t, ldl, 4,
            uint32_t, uint32_t, ADDR_ADD_OSW, false)
 DO_VLDR64_SG(vldrd_sg_os_ud, ADDR_ADD_OSD, false)
 
-DO_VSTR_SG(vstrb_sg_ub, stb, 1, uint8_t, ADDR_ADD, false)
-DO_VSTR_SG(vstrb_sg_uh, stb, 2, uint16_t, ADDR_ADD, false)
-DO_VSTR_SG(vstrb_sg_uw, stb, 4, uint32_t, ADDR_ADD, false)
-DO_VSTR_SG(vstrh_sg_uh, stw, 2, uint16_t, ADDR_ADD, false)
-DO_VSTR_SG(vstrh_sg_uw, stw, 4, uint32_t, ADDR_ADD, false)
-DO_VSTR_SG(vstrw_sg_uw, stl, 4, uint32_t, ADDR_ADD, false)
+DO_VSTR_SG(vstrb_sg_ub, MO_UB, stb, 1, uint8_t, ADDR_ADD, false)
+DO_VSTR_SG(vstrb_sg_uh, MO_UB, stb, 2, uint16_t, ADDR_ADD, false)
+DO_VSTR_SG(vstrb_sg_uw, MO_UB, stb, 4, uint32_t, ADDR_ADD, false)
+DO_VSTR_SG(vstrh_sg_uh, MO_TEUW, stw, 2, uint16_t, ADDR_ADD, false)
+DO_VSTR_SG(vstrh_sg_uw, MO_TEUW, stw, 4, uint32_t, ADDR_ADD, false)
+DO_VSTR_SG(vstrw_sg_uw, MO_TEUL, stl, 4, uint32_t, ADDR_ADD, false)
 DO_VSTR64_SG(vstrd_sg_ud, ADDR_ADD, false)
 
-DO_VSTR_SG(vstrh_sg_os_uh, stw, 2, uint16_t, ADDR_ADD_OSH, false)
-DO_VSTR_SG(vstrh_sg_os_uw, stw, 4, uint32_t, ADDR_ADD_OSH, false)
-DO_VSTR_SG(vstrw_sg_os_uw, stl, 4, uint32_t, ADDR_ADD_OSW, false)
+DO_VSTR_SG(vstrh_sg_os_uh, MO_TEUW, stw, 2, uint16_t, ADDR_ADD_OSH, false)
+DO_VSTR_SG(vstrh_sg_os_uw, MO_TEUW, stw, 4, uint32_t, ADDR_ADD_OSH, false)
+DO_VSTR_SG(vstrw_sg_os_uw, MO_TEUL, stl, 4, uint32_t, ADDR_ADD_OSW, false)
 DO_VSTR64_SG(vstrd_sg_os_ud, ADDR_ADD_OSD, false)
 
 DO_VLDR_SG(vldrw_sg_wb_uw, MO_TEUL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD, true)
 DO_VLDR64_SG(vldrd_sg_wb_ud, ADDR_ADD, true)
-DO_VSTR_SG(vstrw_sg_wb_uw, stl, 4, uint32_t, ADDR_ADD, true)
+DO_VSTR_SG(vstrw_sg_wb_uw, MO_TEUL, stl, 4, uint32_t, ADDR_ADD, true)
 DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true)
 
 /*
-- 
2.43.0

From: William Kosasih <kosasihwilliam4@gmail.com>

This patch adds alignment checks in the load operations in the VLD4
instruction.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1154
Signed-off-by: William Kosasih <kosasihwilliam4@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250703085604.154449-9-kosasihwilliam4@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/mve_helper.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/mve_helper.c
+++ b/target/arm/tcg/mve_helper.c
@@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true)
         uint16_t mask = mve_eci_mask(env);                              \
         static const uint8_t off[4] = { O1, O2, O3, O4 };               \
         uint32_t addr, data;                                            \
+        int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
+        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
                 continue;                                               \
             }                                                           \
             addr = base + off[beat] * 4;                                \
-            data = cpu_ldl_le_data_ra(env, addr, GETPC());              \
+            data = cpu_ldl_mmu(env, addr, oi, GETPC());                 \
             for (e = 0; e < 4; e++, data >>= 8) {                       \
                 uint8_t *qd = (uint8_t *)aa32_vfp_qreg(env, qnidx + e); \
                 qd[H1(off[beat])] = data;                               \
@@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true)
         uint32_t addr, data;                                            \
         int y; /* y counts 0 2 0 2 */                                   \
         uint16_t *qd;                                                   \
+        int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
+        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
         for (beat = 0, y = 0; beat < 4; beat++, mask >>= 4, y ^= 2) {   \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
                 continue;                                               \
             }                                                           \
             addr = base + off[beat] * 8 + (beat & 1) * 4;               \
-            data = cpu_ldl_le_data_ra(env, addr, GETPC());              \
+            data = cpu_ldl_mmu(env, addr, oi, GETPC());                 \
             qd = (uint16_t *)aa32_vfp_qreg(env, qnidx + y);             \
             qd[H2(off[beat])] = data;                                   \
             data >>= 16;                                                \
@@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true)
         uint32_t addr, data;                                            \
         uint32_t *qd;                                                   \
         int y;                                                          \
+        int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
+        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
                 continue;                                               \
             }                                                           \
             addr = base + off[beat] * 4;                                \
-            data = cpu_ldl_le_data_ra(env, addr, GETPC());              \
+            data = cpu_ldl_mmu(env, addr, oi, GETPC());                 \
             y = (beat + (O1 & 2)) & 3;                                  \
             qd = (uint32_t *)aa32_vfp_qreg(env, qnidx + y);             \
             qd[H4(off[beat] >> 2)] = data;                              \
-- 
2.43.0

From: William Kosasih <kosasihwilliam4@gmail.com>

This patch adds alignment checks in the load operations in the VLD2
instruction.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1154
Signed-off-by: William Kosasih <kosasihwilliam4@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250703085604.154449-10-kosasihwilliam4@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/mve_helper.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/mve_helper.c
+++ b/target/arm/tcg/mve_helper.c
@@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9)
         static const uint8_t off[4] = { O1, O2, O3, O4 };               \
         uint32_t addr, data;                                            \
         uint8_t *qd;                                                    \
+        int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
+        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
                 continue;                                               \
             }                                                           \
             addr = base + off[beat] * 2;                                \
-            data = cpu_ldl_le_data_ra(env, addr, GETPC());              \
+            data = cpu_ldl_mmu(env, addr, oi, GETPC());                 \
             for (e = 0; e < 4; e++, data >>= 8) {                       \
                 qd = (uint8_t *)aa32_vfp_qreg(env, qnidx + (e & 1));    \
                 qd[H1(off[beat] + (e >> 1))] = data;                    \
@@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9)
         uint32_t addr, data;                                            \
         int e;                                                          \
         uint16_t *qd;                                                   \
+        int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
+        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
                 continue;                                               \
             }                                                           \
             addr = base + off[beat] * 4;                                \
-            data = cpu_ldl_le_data_ra(env, addr, GETPC());              \
+            data = cpu_ldl_mmu(env, addr, oi, GETPC());                 \
             for (e = 0; e < 2; e++, data >>= 16) {                      \
                 qd = (uint16_t *)aa32_vfp_qreg(env, qnidx + e);         \
                 qd[H2(off[beat])] = data;                               \
@@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9)
         static const uint8_t off[4] = { O1, O2, O3, O4 };               \
         uint32_t addr, data;                                            \
         uint32_t *qd;                                                   \
+        int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
+        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
                 continue;                                               \
             }                                                           \
             addr = base + off[beat];                                    \
-            data = cpu_ldl_le_data_ra(env, addr, GETPC());              \
+            data = cpu_ldl_mmu(env, addr, oi, GETPC());                 \
             qd = (uint32_t *)aa32_vfp_qreg(env, qnidx + (beat & 1));    \
             qd[H4(off[beat] >> 3)] = data;                              \
         }                                                               \
-- 
2.43.0

From: William Kosasih <kosasihwilliam4@gmail.com>

This patch adds alignment checks in the store operations in the VST4
instruction.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1154
Signed-off-by: William Kosasih <kosasihwilliam4@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250703085604.154449-11-kosasihwilliam4@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/mve_helper.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/mve_helper.c
+++ b/target/arm/tcg/mve_helper.c
@@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20)
         uint16_t mask = mve_eci_mask(env);                              \
         static const uint8_t off[4] = { O1, O2, O3, O4 };               \
         uint32_t addr, data;                                            \
+        int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
+        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20)
                 uint8_t *qd = (uint8_t *)aa32_vfp_qreg(env, qnidx + e); \
                 data = (data << 8) | qd[H1(off[beat])];                 \
             }                                                           \
-            cpu_stl_le_data_ra(env, addr, data, GETPC());               \
+            cpu_stl_mmu(env, addr, data, oi, GETPC());                  \
         }                                                               \
     }
 
@@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20)
         uint32_t addr, data;                                            \
         int y; /* y counts 0 2 0 2 */                                   \
         uint16_t *qd;                                                   \
+        int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
+        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
         for (beat = 0, y = 0; beat < 4; beat++, mask >>= 4, y ^= 2) {   \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20)
             data = qd[H2(off[beat])];                                   \
             qd = (uint16_t *)aa32_vfp_qreg(env, qnidx + y + 1);         \
             data |= qd[H2(off[beat])] << 16;                            \
-            cpu_stl_le_data_ra(env, addr, data, GETPC());               \
+            cpu_stl_mmu(env, addr, data, oi, GETPC());                  \
         }                                                               \
     }
 
@@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20)
         uint32_t addr, data;                                            \
         uint32_t *qd;                                                   \
         int y;                                                          \
+        int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
+        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20)
             y = (beat + (O1 & 2)) & 3;                                  \
             qd = (uint32_t *)aa32_vfp_qreg(env, qnidx + y);             \
             data = qd[H4(off[beat] >> 2)];                              \
-            cpu_stl_le_data_ra(env, addr, data, GETPC());               \
+            cpu_stl_mmu(env, addr, data, oi, GETPC());                  \
         }                                                               \
     }
 
-- 
2.43.0

From: William Kosasih <kosasihwilliam4@gmail.com>

This patch adds alignment checks in the store operations in the VST2
instruction.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1154
Signed-off-by: William Kosasih <kosasihwilliam4@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250703085604.154449-12-kosasihwilliam4@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/mve_helper.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/mve_helper.c
+++ b/target/arm/tcg/mve_helper.c
@@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9)
         static const uint8_t off[4] = { O1, O2, O3, O4 };               \
         uint32_t addr, data;                                            \
         uint8_t *qd;                                                    \
+        int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
+        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9)
                 qd = (uint8_t *)aa32_vfp_qreg(env, qnidx + (e & 1));    \
                 data = (data << 8) | qd[H1(off[beat] + (e >> 1))];      \
             }                                                           \
-            cpu_stl_le_data_ra(env, addr, data, GETPC());               \
+            cpu_stl_mmu(env, addr, data, oi, GETPC());                  \
         }                                                               \
     }
 
@@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9)
         uint32_t addr, data;                                            \
         int e;                                                          \
         uint16_t *qd;                                                   \
+        int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
+        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9)
                 qd = (uint16_t *)aa32_vfp_qreg(env, qnidx + e);         \
                 data = (data << 16) | qd[H2(off[beat])];                \
             }                                                           \
-            cpu_stl_le_data_ra(env, addr, data, GETPC());               \
+            cpu_stl_mmu(env, addr, data, oi, GETPC());                  \
         }                                                               \
     }
 
@@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9)
         static const uint8_t off[4] = { O1, O2, O3, O4 };               \
         uint32_t addr, data;                                            \
         uint32_t *qd;                                                   \
+        int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
+        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9)
             addr = base + off[beat];                                    \
             qd = (uint32_t *)aa32_vfp_qreg(env, qnidx + (beat & 1));    \
             data = qd[H4(off[beat] >> 3)];                              \
-            cpu_stl_le_data_ra(env, addr, data, GETPC());               \
+            cpu_stl_mmu(env, addr, data, oi, GETPC());                  \
         }                                                               \
     }
 
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

We failed to raise an exception when
sme_excp_el == 0 and fp_excp_el == 1.

Cc: qemu-stable@nongnu.org
Fixes: 3d74825f4d6 ("target/arm: Add SME enablement checks")
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/translate-a64.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-a64.c
+++ b/target/arm/tcg/translate-a64.c
@@ -XXX,XX +XXX,XX @@ bool sme_enabled_check(DisasContext *s)
      * to be zero when fp_excp_el has priority.  This is because we need
      * sme_excp_el by itself for cpregs access checks.
      */
-    if (!s->fp_excp_el || s->sme_excp_el < s->fp_excp_el) {
+    if (s->sme_excp_el
+        && (!s->fp_excp_el || s->sme_excp_el <= s->fp_excp_el)) {
         bool ret = sme_access_check(s);
         s->fp_access_checked = (ret ? 1 : -1);
         return ret;
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Do not assume SME implies SVE.  Ensure that the non-streaming
check is present along the SME path, since it is not implied
by sme_*_enabled_check.

Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/translate-a64.c | 26 +++++++++++++++++++-------
 1 file changed, 19 insertions(+), 7 deletions(-)

diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-a64.c
+++ b/target/arm/tcg/translate-a64.c
@@ -XXX,XX +XXX,XX @@ static bool fp_access_check_only(DisasContext *s)
     return true;
 }
 
-static bool fp_access_check(DisasContext *s)
+static bool nonstreaming_check(DisasContext *s)
 {
-    if (!fp_access_check_only(s)) {
-        return false;
-    }
     if (s->sme_trap_nonstreaming && s->is_nonstreaming) {
         gen_exception_insn(s, 0, EXCP_UDEF,
                            syn_smetrap(SME_ET_Streaming, false));
@@ -XXX,XX +XXX,XX @@ static bool fp_access_check(DisasContext *s)
     return true;
 }
 
+static bool fp_access_check(DisasContext *s)
+{
+    return fp_access_check_only(s) && nonstreaming_check(s);
+}
+
 /*
  * Return <0 for non-supported element sizes, with MO_16 controlled by
  * FEAT_FP16; return 0 for fp disabled; otherwise return >0 for success.
@@ -XXX,XX +XXX,XX @@ static int fp_access_check_vector_hsd(DisasContext *s, bool is_q, MemOp esz)
  */
 bool sve_access_check(DisasContext *s)
 {
-    if (s->pstate_sm || !dc_isar_feature(aa64_sve, s)) {
+    if (dc_isar_feature(aa64_sme, s)) {
         bool ret;
 
-        assert(dc_isar_feature(aa64_sme, s));
-        ret = sme_sm_enabled_check(s);
+        if (s->pstate_sm) {
+            ret = sme_enabled_check(s);
+        } else if (dc_isar_feature(aa64_sve, s)) {
+            goto continue_sve;
+        } else {
+            ret = sme_sm_enabled_check(s);
+        }
+        if (ret) {
+            ret = nonstreaming_check(s);
+        }
         s->sve_access_checked = (ret ? 1 : -1);
         return ret;
     }
+
+ continue_sve:
     if (s->sve_excp_el) {
         /* Assert that we only raise one exception per instruction. */
         assert(!s->sve_access_checked);
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

We missed the instructions UDEF when the vector size is too small.
We missed marking the instructions non-streaming with SME.

Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/translate-sve.c | 43 ++++++++++++++++++++++++----------
 1 file changed, 30 insertions(+), 13 deletions(-)

diff --git a/target/arm/tcg/translate-sve.c b/target/arm/tcg/translate-sve.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-sve.c
+++ b/target/arm/tcg/translate-sve.c
@@ -XXX,XX +XXX,XX @@ TRANS_FEAT(PUNPKHI, aa64_sve, do_perm_pred2, a, 1, gen_helper_sve_punpk_p)
  *** SVE Permute - Interleaving Group
  */
 
+static bool do_interleave_q(DisasContext *s, gen_helper_gvec_3 *fn,
+                            arg_rrr_esz *a, int data)
+{
+    if (sve_access_check(s)) {
+        unsigned vsz = vec_full_reg_size(s);
+        if (vsz < 32) {
+            unallocated_encoding(s);
+        } else {
+            tcg_gen_gvec_3_ool(vec_full_reg_offset(s, a->rd),
+                               vec_full_reg_offset(s, a->rn),
+                               vec_full_reg_offset(s, a->rm),
+                               vsz, vsz, data, fn);
+        }
+    }
+    return true;
+}
+
 static gen_helper_gvec_3 * const zip_fns[4] = {
     gen_helper_sve_zip_b, gen_helper_sve_zip_h,
     gen_helper_sve_zip_s, gen_helper_sve_zip_d,
@@ -XXX,XX +XXX,XX @@ TRANS_FEAT(ZIP1_z, aa64_sve, gen_gvec_ool_arg_zzz,
 TRANS_FEAT(ZIP2_z, aa64_sve, gen_gvec_ool_arg_zzz,
            zip_fns[a->esz], a, vec_full_reg_size(s) / 2)
 
-TRANS_FEAT(ZIP1_q, aa64_sve_f64mm, gen_gvec_ool_arg_zzz,
-           gen_helper_sve2_zip_q, a, 0)
-TRANS_FEAT(ZIP2_q, aa64_sve_f64mm, gen_gvec_ool_arg_zzz,
-           gen_helper_sve2_zip_q, a,
-           QEMU_ALIGN_DOWN(vec_full_reg_size(s), 32) / 2)
+TRANS_FEAT_NONSTREAMING(ZIP1_q, aa64_sve_f64mm, do_interleave_q,
+                        gen_helper_sve2_zip_q, a, 0)
+TRANS_FEAT_NONSTREAMING(ZIP2_q, aa64_sve_f64mm, do_interleave_q,
+                        gen_helper_sve2_zip_q, a,
+                        QEMU_ALIGN_DOWN(vec_full_reg_size(s), 32) / 2)
 
 static gen_helper_gvec_3 * const uzp_fns[4] = {
     gen_helper_sve_uzp_b, gen_helper_sve_uzp_h,
@@ -XXX,XX +XXX,XX @@ TRANS_FEAT(UZP1_z, aa64_sve, gen_gvec_ool_arg_zzz,
 TRANS_FEAT(UZP2_z, aa64_sve, gen_gvec_ool_arg_zzz,
            uzp_fns[a->esz], a, 1 << a->esz)
 
-TRANS_FEAT(UZP1_q, aa64_sve_f64mm, gen_gvec_ool_arg_zzz,
-           gen_helper_sve2_uzp_q, a, 0)
-TRANS_FEAT(UZP2_q, aa64_sve_f64mm, gen_gvec_ool_arg_zzz,
-           gen_helper_sve2_uzp_q, a, 16)
+TRANS_FEAT_NONSTREAMING(UZP1_q, aa64_sve_f64mm, do_interleave_q,
+                        gen_helper_sve2_uzp_q, a, 0)
+TRANS_FEAT_NONSTREAMING(UZP2_q, aa64_sve_f64mm, do_interleave_q,
+                        gen_helper_sve2_uzp_q, a, 16)
 
 static gen_helper_gvec_3 * const trn_fns[4] = {
     gen_helper_sve_trn_b, gen_helper_sve_trn_h,
@@ -XXX,XX +XXX,XX @@ TRANS_FEAT(TRN1_z, aa64_sve, gen_gvec_ool_arg_zzz,
 TRANS_FEAT(TRN2_z, aa64_sve, gen_gvec_ool_arg_zzz,
            trn_fns[a->esz], a, 1 << a->esz)
 
-TRANS_FEAT(TRN1_q, aa64_sve_f64mm, gen_gvec_ool_arg_zzz,
-           gen_helper_sve2_trn_q, a, 0)
-TRANS_FEAT(TRN2_q, aa64_sve_f64mm, gen_gvec_ool_arg_zzz,
-           gen_helper_sve2_trn_q, a, 16)
+TRANS_FEAT_NONSTREAMING(TRN1_q, aa64_sve_f64mm, do_interleave_q,
+                        gen_helper_sve2_trn_q, a, 0)
+TRANS_FEAT_NONSTREAMING(TRN2_q, aa64_sve_f64mm, do_interleave_q,
+                        gen_helper_sve2_trn_q, a, 16)
 
 /*
  *** SVE Permute Vector - Predicated Group
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Replace @rda_rn_rm_e0 with @rda_rn_rm_ex, and require
users to supply an explicit esz.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/sve.decode | 48 +++++++++++++++++++--------------------
 1 file changed, 24 insertions(+), 24 deletions(-)

diff --git a/target/arm/tcg/sve.decode b/target/arm/tcg/sve.decode
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/sve.decode
+++ b/target/arm/tcg/sve.decode
@@ -XXX,XX +XXX,XX @@
 @rda_rn_rm      ........ esz:2 . rm:5 ... ... rn:5 rd:5 \
                 &rrrr_esz ra=%reg_movprfx
 
-# Four operand with unused vector element size
-@rda_rn_rm_e0   ........ ... rm:5 ... ... rn:5 rd:5 \
-                &rrrr_esz esz=0 ra=%reg_movprfx
-@rdn_ra_rm_e0   ........ ... rm:5 ... ... ra:5 rd:5 \
-                &rrrr_esz esz=0 rn=%reg_movprfx
+# Four operand with explicit vector element size
+@rda_rn_rm_ex   ........ ... rm:5 ... ... rn:5 rd:5 \
+                &rrrr_esz ra=%reg_movprfx
+@rdn_ra_rm_ex   ........ ... rm:5 ... ... ra:5 rd:5 \
+                &rrrr_esz rn=%reg_movprfx
 
 # Three operand with "memory" size, aka immediate left shift
 @rd_rn_msz_rm   ........ ... rm:5 .... imm:2 rn:5 rd:5          &rrri
@@ -XXX,XX +XXX,XX @@ XAR             00000100 .. 1 ..... 001 101 rm:5  rd:5   &rrri_esz \
                 rn=%reg_movprfx esz=%tszimm16_esz imm=%tszimm16_shr
 
 # SVE2 bitwise ternary operations
-EOR3            00000100 00 1 ..... 001 110 ..... .....         @rdn_ra_rm_e0
-BSL             00000100 00 1 ..... 001 111 ..... .....         @rdn_ra_rm_e0
-BCAX            00000100 01 1 ..... 001 110 ..... .....         @rdn_ra_rm_e0
-BSL1N           00000100 01 1 ..... 001 111 ..... .....         @rdn_ra_rm_e0
-BSL2N           00000100 10 1 ..... 001 111 ..... .....         @rdn_ra_rm_e0
-NBSL            00000100 11 1 ..... 001 111 ..... .....         @rdn_ra_rm_e0
+EOR3            00000100 00 1 ..... 001 110 ..... .....     @rdn_ra_rm_ex esz=0
+BSL             00000100 00 1 ..... 001 111 ..... .....     @rdn_ra_rm_ex esz=0
+BCAX            00000100 01 1 ..... 001 110 ..... .....     @rdn_ra_rm_ex esz=0
+BSL1N           00000100 01 1 ..... 001 111 ..... .....     @rdn_ra_rm_ex esz=0
+BSL2N           00000100 10 1 ..... 001 111 ..... .....     @rdn_ra_rm_ex esz=0
+NBSL            00000100 11 1 ..... 001 111 ..... .....     @rdn_ra_rm_ex esz=0
 
 ### SVE Index Generation Group
 
@@ -XXX,XX +XXX,XX @@ EORTB           01000101 .. 0 ..... 10010 1 ..... .....  @rd_rn_rm
 
 ## SVE integer matrix multiply accumulate
 
-SMMLA           01000101 00 0 ..... 10011 0 ..... .....  @rda_rn_rm_e0
-USMMLA          01000101 10 0 ..... 10011 0 ..... .....  @rda_rn_rm_e0
-UMMLA           01000101 11 0 ..... 10011 0 ..... .....  @rda_rn_rm_e0
+SMMLA           01000101 00 0 ..... 10011 0 ..... .....  @rda_rn_rm_ex esz=2
+USMMLA          01000101 10 0 ..... 10011 0 ..... .....  @rda_rn_rm_ex esz=2
+UMMLA           01000101 11 0 ..... 10011 0 ..... .....  @rda_rn_rm_ex esz=2
 
 ## SVE2 bitwise permute
 
@@ -XXX,XX +XXX,XX @@ SQRDCMLAH_zzzz  01000100 esz:2 0 rm:5 0011 rot:2 rn:5 rd:5  ra=%reg_movprfx
 USDOT_zzzz      01000100 .. 0 ..... 011 110 ..... .....  @rda_rn_rm
 
 ### SVE2 floating point matrix multiply accumulate
-BFMMLA          01100100 01 1 ..... 111 001 ..... .....  @rda_rn_rm_e0
-FMMLA_s         01100100 10 1 ..... 111 001 ..... .....  @rda_rn_rm_e0
-FMMLA_d         01100100 11 1 ..... 111 001 ..... .....  @rda_rn_rm_e0
+BFMMLA          01100100 01 1 ..... 111 001 ..... .....  @rda_rn_rm_ex esz=1
+FMMLA_s         01100100 10 1 ..... 111 001 ..... .....  @rda_rn_rm_ex esz=2
+FMMLA_d         01100100 11 1 ..... 111 001 ..... .....  @rda_rn_rm_ex esz=3
 
 ### SVE2 Memory Gather Load Group
 
@@ -XXX,XX +XXX,XX @@ FCVTLT_sd       01100100 11 0010 11 101 ... ..... .....  @rd_pg_rn_e0
 FLOGB           01100101 00 011 esz:2 0101 pg:3 rn:5 rd:5  &rpr_esz
 
 ### SVE2 floating-point multiply-add long (vectors)
-FMLALB_zzzw     01100100 10 1 ..... 10 0 00 0 ..... .....  @rda_rn_rm_e0
-FMLALT_zzzw     01100100 10 1 ..... 10 0 00 1 ..... .....  @rda_rn_rm_e0
-FMLSLB_zzzw     01100100 10 1 ..... 10 1 00 0 ..... .....  @rda_rn_rm_e0
-FMLSLT_zzzw     01100100 10 1 ..... 10 1 00 1 ..... .....  @rda_rn_rm_e0
+FMLALB_zzzw     01100100 10 1 ..... 10 0 00 0 ..... .....  @rda_rn_rm_ex esz=2
+FMLALT_zzzw     01100100 10 1 ..... 10 0 00 1 ..... .....  @rda_rn_rm_ex esz=2
+FMLSLB_zzzw     01100100 10 1 ..... 10 1 00 0 ..... .....  @rda_rn_rm_ex esz=2
+FMLSLT_zzzw     01100100 10 1 ..... 10 1 00 1 ..... .....  @rda_rn_rm_ex esz=2
 
-BFMLALB_zzzw    01100100 11 1 ..... 10 0 00 0 ..... .....  @rda_rn_rm_e0
-BFMLALT_zzzw    01100100 11 1 ..... 10 0 00 1 ..... .....  @rda_rn_rm_e0
+BFMLALB_zzzw    01100100 11 1 ..... 10 0 00 0 ..... .....  @rda_rn_rm_ex esz=2
+BFMLALT_zzzw    01100100 11 1 ..... 10 0 00 1 ..... .....  @rda_rn_rm_ex esz=2
 
 ### SVE2 floating-point bfloat16 dot-product
-BFDOT_zzzz      01100100 01 1 ..... 10 0 00 0 ..... .....  @rda_rn_rm_e0
+BFDOT_zzzz      01100100 01 1 ..... 10 0 00 0 ..... .....  @rda_rn_rm_ex esz=2
 
 ### SVE2 floating-point multiply-add long (indexed)
 FMLALB_zzxw     01100100 10 1 ..... 0100.0 ..... .....     @rrxr_3a esz=2
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/translate-sve.c | 23 ++++++++++++++++-------
 1 file changed, 16 insertions(+), 7 deletions(-)

diff --git a/target/arm/tcg/translate-sve.c b/target/arm/tcg/translate-sve.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-sve.c
+++ b/target/arm/tcg/translate-sve.c
@@ -XXX,XX +XXX,XX @@ DO_ZPZZ_FP(FMINNMP, aa64_sve2, sve2_fminnmp_zpzz)
 DO_ZPZZ_FP(FMAXP, aa64_sve2, sve2_fmaxp_zpzz)
 DO_ZPZZ_FP(FMINP, aa64_sve2, sve2_fminp_zpzz)
 
+static bool do_fmmla(DisasContext *s, arg_rrrr_esz *a,
+                     gen_helper_gvec_4_ptr *fn)
+{
+    if (sve_access_check(s)) {
+        if (vec_full_reg_size(s) < 4 * memop_size(a->esz)) {
+            unallocated_encoding(s);
+        } else {
+            gen_gvec_fpst_zzzz(s, fn, a->rd, a->rn, a->rm, a->ra, 0, FPST_A64);
+        }
+    }
+    return true;
+}
+
+TRANS_FEAT_NONSTREAMING(FMMLA_s, aa64_sve_f32mm, do_fmmla, a, gen_helper_fmmla_s)
+TRANS_FEAT_NONSTREAMING(FMMLA_d, aa64_sve_f64mm, do_fmmla, a, gen_helper_fmmla_d)
+
 /*
  * SVE Integer Multiply-Add (unpredicated)
  */
 
-TRANS_FEAT_NONSTREAMING(FMMLA_s, aa64_sve_f32mm, gen_gvec_fpst_zzzz,
-                        gen_helper_fmmla_s, a->rd, a->rn, a->rm, a->ra,
-                        0, FPST_A64)
-TRANS_FEAT_NONSTREAMING(FMMLA_d, aa64_sve_f64mm, gen_gvec_fpst_zzzz,
-                        gen_helper_fmmla_d, a->rd, a->rn, a->rm, a->ra,
-                        0, FPST_A64)
-
 static gen_helper_gvec_4 * const sqdmlal_zzzw_fns[] = {
     NULL,                           gen_helper_sve2_sqdmlal_zzzw_h,
     gen_helper_sve2_sqdmlal_zzzw_s, gen_helper_sve2_sqdmlal_zzzw_d,
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

All F64MM instructions operate on a 256-bit vector.
If only 128-bit vectors is supported by the cpu,
then the cpu cannot enable F64MM.

Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu64.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu64.c
+++ b/target/arm/cpu64.c
@@ -XXX,XX +XXX,XX @@ void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp)
     /* From now on sve_max_vq is the actual maximum supported length. */
     cpu->sve_max_vq = max_vq;
     cpu->sve_vq.map = vq_map;
+
+    /* FEAT_F64MM requires the existence of a 256-bit vector size. */
+    if (max_vq < 2) {
+        uint64_t t = GET_IDREG(&cpu->isar, ID_AA64ZFR0);
+        t = FIELD_DP64(t, ID_AA64ZFR0, F64MM, 0);
+        SET_IDREG(&cpu->isar, ID_AA64ZFR0, t);
+    }
 }
 
 /*
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Gvec only operates on size 8 and multiples of 16.
Predicates may be any multiple of 2.
Round up the size using the appropriate function.

Cc: qemu-stable@nongnu.org
Fixes: 598ab0b24c0 ("target/arm: Implement PSEL")
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/translate-sve.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/target/arm/tcg/translate-sve.c b/target/arm/tcg/translate-sve.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-sve.c
+++ b/target/arm/tcg/translate-sve.c
@@ -XXX,XX +XXX,XX @@ static bool trans_PSEL(DisasContext *s, arg_psel *a)
     tcg_gen_neg_i64(tmp, tmp);
 
     /* Apply to either copy the source, or write zeros. */
+    pl = size_for_gvec(pl);
     tcg_gen_gvec_ands(MO_64, pred_full_reg_offset(s, a->pd),
                       pred_full_reg_offset(s, a->pn), tmp, pl, pl);
     return true;
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Implement FPProcessNaNs4 within f16_dotadd, rather than
simply letting NaNs propagate through the function.

Cc: qemu-stable@nongnu.org
Fixes: 3916841ac75 ("target/arm: Implement FMOPA, FMOPS (widening)")
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/sme_helper.c | 62 +++++++++++++++++++++++++++----------
 1 file changed, 46 insertions(+), 16 deletions(-)

diff --git a/target/arm/tcg/sme_helper.c b/target/arm/tcg/sme_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/sme_helper.c
+++ b/target/arm/tcg/sme_helper.c
@@ -XXX,XX +XXX,XX @@ static float32 f16_dotadd(float32 sum, uint32_t e1, uint32_t e2,
      *  - we have pre-set-up copy of s_std which is set to round-to-odd,
      *    for the multiply (see below)
      */
-    float64 e1r = float16_to_float64(e1 & 0xffff, true, s_f16);
-    float64 e1c = float16_to_float64(e1 >> 16, true, s_f16);
-    float64 e2r = float16_to_float64(e2 & 0xffff, true, s_f16);
-    float64 e2c = float16_to_float64(e2 >> 16, true, s_f16);
-    float64 t64;
+    float16 h1r = e1 & 0xffff;
+    float16 h1c = e1 >> 16;
+    float16 h2r = e2 & 0xffff;
+    float16 h2c = e2 >> 16;
     float32 t32;
 
-    /*
-     * The ARM pseudocode function FPDot performs both multiplies
-     * and the add with a single rounding operation.  Emulate this
-     * by performing the first multiply in round-to-odd, then doing
-     * the second multiply as fused multiply-add, and rounding to
-     * float32 all in one step.
-     */
-    t64 = float64_mul(e1r, e2r, s_odd);
-    t64 = float64r32_muladd(e1c, e2c, t64, 0, s_std);
+    /* C.f. FPProcessNaNs4 */
+    if (float16_is_any_nan(h1r) || float16_is_any_nan(h1c) ||
+        float16_is_any_nan(h2r) || float16_is_any_nan(h2c)) {
+        float16 t16;
 
-    /* This conversion is exact, because we've already rounded. */
-    t32 = float64_to_float32(t64, s_std);
+        if (float16_is_signaling_nan(h1r, s_f16)) {
+            t16 = h1r;
+        } else if (float16_is_signaling_nan(h1c, s_f16)) {
+            t16 = h1c;
+        } else if (float16_is_signaling_nan(h2r, s_f16)) {
+            t16 = h2r;
+        } else if (float16_is_signaling_nan(h2c, s_f16)) {
+            t16 = h2c;
+        } else if (float16_is_any_nan(h1r)) {
+            t16 = h1r;
+        } else if (float16_is_any_nan(h1c)) {
+            t16 = h1c;
+        } else if (float16_is_any_nan(h2r)) {
+            t16 = h2r;
+        } else {
+            t16 = h2c;
+        }
+        t32 = float16_to_float32(t16, true, s_f16);
+    } else {
+        float64 e1r = float16_to_float64(h1r, true, s_f16);
+        float64 e1c = float16_to_float64(h1c, true, s_f16);
+        float64 e2r = float16_to_float64(h2r, true, s_f16);
+        float64 e2c = float16_to_float64(h2c, true, s_f16);
+        float64 t64;
+
+        /*
+         * The ARM pseudocode function FPDot performs both multiplies
+         * and the add with a single rounding operation.  Emulate this
+         * by performing the first multiply in round-to-odd, then doing
+         * the second multiply as fused multiply-add, and rounding to
+         * float32 all in one step.
+         */
+        t64 = float64_mul(e1r, e2r, s_odd);
+        t64 = float64r32_muladd(e1c, e2c, t64, 0, s_std);
+
+        /* This conversion is exact, because we've already rounded. */
+        t32 = float64_to_float32(t64, s_std);
+    }
 
     /* The final accumulation step is not fused. */
     return float32_add(sum, t32, s_std);
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Implement FPProcessNaNs4 within bfdotadd_ebf, rather than
simply letting NaNs propagate through the function.

Cc: qemu-stable@nongnu.org
Fixes: 0e1850182a1 ("target/arm: Implement FPCR.EBF=1 semantics for bfdotadd()")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250704142112.1018902-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/vec_helper.c | 75 ++++++++++++++++++++++++++-----------
 1 file changed, 53 insertions(+), 22 deletions(-)

diff --git a/target/arm/tcg/vec_helper.c b/target/arm/tcg/vec_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/vec_helper.c
+++ b/target/arm/tcg/vec_helper.c
@@ -XXX,XX +XXX,XX @@ float32 bfdotadd(float32 sum, uint32_t e1, uint32_t e2, float_status *fpst)
 float32 bfdotadd_ebf(float32 sum, uint32_t e1, uint32_t e2,
                      float_status *fpst, float_status *fpst_odd)
 {
-    /*
-     * Compare f16_dotadd() in sme_helper.c, but here we have
-     * bfloat16 inputs. In particular that means that we do not
-     * want the FPCR.FZ16 flush semantics, so we use the normal
-     * float_status for the input handling here.
-     */
-    float64 e1r = float32_to_float64(e1 << 16, fpst);
-    float64 e1c = float32_to_float64(e1 & 0xffff0000u, fpst);
-    float64 e2r = float32_to_float64(e2 << 16, fpst);
-    float64 e2c = float32_to_float64(e2 & 0xffff0000u, fpst);
-    float64 t64;
+    float32 s1r = e1 << 16;
+    float32 s1c = e1 & 0xffff0000u;
+    float32 s2r = e2 << 16;
+    float32 s2c = e2 & 0xffff0000u;
     float32 t32;
 
-    /*
-     * The ARM pseudocode function FPDot performs both multiplies
-     * and the add with a single rounding operation.  Emulate this
-     * by performing the first multiply in round-to-odd, then doing
-     * the second multiply as fused multiply-add, and rounding to
-     * float32 all in one step.
-     */
-    t64 = float64_mul(e1r, e2r, fpst_odd);
-    t64 = float64r32_muladd(e1c, e2c, t64, 0, fpst);
+    /* C.f. FPProcessNaNs4 */
+    if (float32_is_any_nan(s1r) || float32_is_any_nan(s1c) ||
+        float32_is_any_nan(s2r) || float32_is_any_nan(s2c)) {
+        if (float32_is_signaling_nan(s1r, fpst)) {
+            t32 = s1r;
+        } else if (float32_is_signaling_nan(s1c, fpst)) {
+            t32 = s1c;
+        } else if (float32_is_signaling_nan(s2r, fpst)) {
+            t32 = s2r;
+        } else if (float32_is_signaling_nan(s2c, fpst)) {
+            t32 = s2c;
+        } else if (float32_is_any_nan(s1r)) {
+            t32 = s1r;
+        } else if (float32_is_any_nan(s1c)) {
+            t32 = s1c;
+        } else if (float32_is_any_nan(s2r)) {
+            t32 = s2r;
+        } else {
+            t32 = s2c;
+        }
+        /*
+         * FPConvertNaN(FPProcessNaN(t32)) will be done as part
+         * of the final addition below.
+         */
+    } else {
+        /*
+         * Compare f16_dotadd() in sme_helper.c, but here we have
+         * bfloat16 inputs. In particular that means that we do not
+         * want the FPCR.FZ16 flush semantics, so we use the normal
+         * float_status for the input handling here.
+         */
+        float64 e1r = float32_to_float64(s1r, fpst);
+        float64 e1c = float32_to_float64(s1c, fpst);
+        float64 e2r = float32_to_float64(s2r, fpst);
+        float64 e2c = float32_to_float64(s2c, fpst);
+        float64 t64;
 
-    /* This conversion is exact, because we've already rounded. */
-    t32 = float64_to_float32(t64, fpst);
+        /*
+         * The ARM pseudocode function FPDot performs both multiplies
+         * and the add with a single rounding operation.  Emulate this
+         * by performing the first multiply in round-to-odd, then doing
+         * the second multiply as fused multiply-add, and rounding to
+         * float32 all in one step.
+         */
+        t64 = float64_mul(e1r, e2r, fpst_odd);
+        t64 = float64r32_muladd(e1c, e2c, t64, 0, fpst);
+
+        /* This conversion is exact, because we've already rounded. */
+        t32 = float64_to_float32(t64, fpst);
+    }
 
     /* The final accumulation step is not fused. */
     return float32_add(sum, t32, fpst);
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Rather than repeatedly copying FPST_FPCR to locals
and setting default nan mode, create dedicated float_status.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu.h            | 12 +++++++++++-
 target/arm/cpu.c            |  4 ++++
 target/arm/tcg/vfp_helper.c | 12 +++++++++++-
 3 files changed, 26 insertions(+), 2 deletions(-)

diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -XXX,XX +XXX,XX @@ typedef struct NVICState NVICState;
  *       when FPCR.AH == 1 (bfloat16 conversions and multiplies,
  *       and the reciprocal and square root estimate/step insns);
  *       for half-precision
+ * ZA: the "streaming sve" fp status.
+ * ZA_F16: likewise for half-precision.
  *
  * Half-precision operations are governed by a separate
  * flush-to-zero control bit in FPSCR:FZ16. We pass a separate
@@ -XXX,XX +XXX,XX @@ typedef struct NVICState NVICState;
  * they ignore FPCR.RMode. But they don't ignore FPCR.FZ16,
  * which means we need an FPST_AH_F16 as well.
  *
+ * The "ZA" float_status are for Streaming SVE operations which use
+ * default-NaN and do not generate fp exceptions, which means that they
+ * do not accumulate exception bits back into FPCR.
+ * See e.g. FPAdd vs FPAdd_ZA pseudocode functions, and the setting
+ * of fpcr.DN and fpexec parameters.
+ *
  * To avoid having to transfer exception bits around, we simply
  * say that the FPSCR cumulative exception flags are the logical
  * OR of the flags in the four fp statuses. This relies on the
@@ -XXX,XX +XXX,XX @@ typedef enum ARMFPStatusFlavour {
     FPST_A64_F16,
     FPST_AH,
     FPST_AH_F16,
+    FPST_ZA,
+    FPST_ZA_F16,
     FPST_STD,
     FPST_STD_F16,
 } ARMFPStatusFlavour;
-#define FPST_COUNT  8
+#define FPST_COUNT  10
 
 typedef struct CPUArchState {
     /* Regs for current mode.  */
diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset_hold(Object *obj, ResetType type)
     set_flush_inputs_to_zero(1, &env->vfp.fp_status[FPST_STD]);
     set_default_nan_mode(1, &env->vfp.fp_status[FPST_STD]);
     set_default_nan_mode(1, &env->vfp.fp_status[FPST_STD_F16]);
+    set_default_nan_mode(1, &env->vfp.fp_status[FPST_ZA]);
+    set_default_nan_mode(1, &env->vfp.fp_status[FPST_ZA_F16]);
     arm_set_default_fp_behaviours(&env->vfp.fp_status[FPST_A32]);
     arm_set_default_fp_behaviours(&env->vfp.fp_status[FPST_A64]);
+    arm_set_default_fp_behaviours(&env->vfp.fp_status[FPST_ZA]);
     arm_set_default_fp_behaviours(&env->vfp.fp_status[FPST_STD]);
     arm_set_default_fp_behaviours(&env->vfp.fp_status[FPST_A32_F16]);
     arm_set_default_fp_behaviours(&env->vfp.fp_status[FPST_A64_F16]);
+    arm_set_default_fp_behaviours(&env->vfp.fp_status[FPST_ZA_F16]);
     arm_set_default_fp_behaviours(&env->vfp.fp_status[FPST_STD_F16]);
     arm_set_ah_fp_behaviours(&env->vfp.fp_status[FPST_AH]);
     set_flush_to_zero(1, &env->vfp.fp_status[FPST_AH]);
diff --git a/target/arm/tcg/vfp_helper.c b/target/arm/tcg/vfp_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/vfp_helper.c
+++ b/target/arm/tcg/vfp_helper.c
@@ -XXX,XX +XXX,XX @@ uint32_t vfp_get_fpsr_from_host(CPUARMState *env)
     a64_flags |= (get_float_exception_flags(&env->vfp.fp_status[FPST_A64_F16])
           & ~(float_flag_input_denormal_flushed | float_flag_input_denormal_used));
     /*
-     * We do not merge in flags from FPST_AH or FPST_AH_F16, because
+     * We do not merge in flags from FPST_{AH,ZA} or FPST_{AH,ZA}_F16, because
      * they are used for insns that must not set the cumulative exception bits.
      */
 
@@ -XXX,XX +XXX,XX @@ void vfp_set_fpcr_to_host(CPUARMState *env, uint32_t val, uint32_t mask)
         set_float_rounding_mode(i, &env->vfp.fp_status[FPST_A64]);
         set_float_rounding_mode(i, &env->vfp.fp_status[FPST_A32_F16]);
         set_float_rounding_mode(i, &env->vfp.fp_status[FPST_A64_F16]);
+        set_float_rounding_mode(i, &env->vfp.fp_status[FPST_ZA]);
+        set_float_rounding_mode(i, &env->vfp.fp_status[FPST_ZA_F16]);
     }
     if (changed & FPCR_FZ16) {
         bool ftz_enabled = val & FPCR_FZ16;
@@ -XXX,XX +XXX,XX @@ void vfp_set_fpcr_to_host(CPUARMState *env, uint32_t val, uint32_t mask)
         set_flush_to_zero(ftz_enabled, &env->vfp.fp_status[FPST_A64_F16]);
         set_flush_to_zero(ftz_enabled, &env->vfp.fp_status[FPST_STD_F16]);
         set_flush_to_zero(ftz_enabled, &env->vfp.fp_status[FPST_AH_F16]);
+        set_flush_to_zero(ftz_enabled, &env->vfp.fp_status[FPST_ZA_F16]);
         set_flush_inputs_to_zero(ftz_enabled, &env->vfp.fp_status[FPST_A32_F16]);
         set_flush_inputs_to_zero(ftz_enabled, &env->vfp.fp_status[FPST_A64_F16]);
         set_flush_inputs_to_zero(ftz_enabled, &env->vfp.fp_status[FPST_STD_F16]);
         set_flush_inputs_to_zero(ftz_enabled, &env->vfp.fp_status[FPST_AH_F16]);
+        set_flush_inputs_to_zero(ftz_enabled, &env->vfp.fp_status[FPST_ZA_F16]);
     }
     if (changed & FPCR_FZ) {
         bool ftz_enabled = val & FPCR_FZ;
         set_flush_to_zero(ftz_enabled, &env->vfp.fp_status[FPST_A32]);
         set_flush_to_zero(ftz_enabled, &env->vfp.fp_status[FPST_A64]);
+        set_flush_to_zero(ftz_enabled, &env->vfp.fp_status[FPST_ZA]);
         /* FIZ is A64 only so FZ always makes A32 code flush inputs to zero */
         set_flush_inputs_to_zero(ftz_enabled, &env->vfp.fp_status[FPST_A32]);
     }
@@ -XXX,XX +XXX,XX @@ void vfp_set_fpcr_to_host(CPUARMState *env, uint32_t val, uint32_t mask)
         bool fitz_enabled = (val & FPCR_FIZ) ||
             (val & (FPCR_FZ | FPCR_AH)) == FPCR_FZ;
         set_flush_inputs_to_zero(fitz_enabled, &env->vfp.fp_status[FPST_A64]);
+        set_flush_inputs_to_zero(fitz_enabled, &env->vfp.fp_status[FPST_ZA]);
     }
     if (changed & FPCR_DN) {
         bool dnan_enabled = val & FPCR_DN;
@@ -XXX,XX +XXX,XX @@ void vfp_set_fpcr_to_host(CPUARMState *env, uint32_t val, uint32_t mask)
             /* Change behaviours for A64 FP operations */
             arm_set_ah_fp_behaviours(&env->vfp.fp_status[FPST_A64]);
             arm_set_ah_fp_behaviours(&env->vfp.fp_status[FPST_A64_F16]);
+            arm_set_ah_fp_behaviours(&env->vfp.fp_status[FPST_ZA]);
+            arm_set_ah_fp_behaviours(&env->vfp.fp_status[FPST_ZA_F16]);
         } else {
             arm_set_default_fp_behaviours(&env->vfp.fp_status[FPST_A64]);
             arm_set_default_fp_behaviours(&env->vfp.fp_status[FPST_A64_F16]);
+            arm_set_default_fp_behaviours(&env->vfp.fp_status[FPST_ZA]);
+            arm_set_default_fp_behaviours(&env->vfp.fp_status[FPST_ZA_F16]);
         }
     }
     /*
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/sme_helper.c    | 37 ++++++++--------------------------
 target/arm/tcg/translate-sme.c |  4 ++--
 2 files changed, 10 insertions(+), 31 deletions(-)

diff --git a/target/arm/tcg/sme_helper.c b/target/arm/tcg/sme_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/sme_helper.c
+++ b/target/arm/tcg/sme_helper.c
@@ -XXX,XX +XXX,XX @@ void HELPER(sme_addva_d)(void *vzda, void *vzn, void *vpn,
 }
 
 void HELPER(sme_fmopa_s)(void *vza, void *vzn, void *vzm, void *vpn,
-                         void *vpm, float_status *fpst_in, uint32_t desc)
+                         void *vpm, float_status *fpst, uint32_t desc)
 {
     intptr_t row, col, oprsz = simd_maxsz(desc);
     uint32_t neg = simd_data(desc) << 31;
     uint16_t *pn = vpn, *pm = vpm;
-    float_status fpst;
-
-    /*
-     * Make a copy of float_status because this operation does not
-     * update the cumulative fp exception status.  It also produces
-     * default nans.
-     */
-    fpst = *fpst_in;
-    set_default_nan_mode(true, &fpst);
 
     for (row = 0; row < oprsz; ) {
         uint16_t pa = pn[H2(row >> 4)];
@@ -XXX,XX +XXX,XX @@ void HELPER(sme_fmopa_s)(void *vza, void *vzn, void *vzm, void *vpn,
                         if (pb & 1) {
                             uint32_t *a = vza_row + H1_4(col);
                             uint32_t *m = vzm + H1_4(col);
-                            *a = float32_muladd(n, *m, *a, 0, &fpst);
+                            *a = float32_muladd(n, *m, *a, 0, fpst);
                         }
                         col += 4;
                         pb >>= 4;
@@ -XXX,XX +XXX,XX @@ void HELPER(sme_fmopa_s)(void *vza, void *vzn, void *vzm, void *vpn,
 }
 
 void HELPER(sme_fmopa_d)(void *vza, void *vzn, void *vzm, void *vpn,
-                         void *vpm, float_status *fpst_in, uint32_t desc)
+                         void *vpm, float_status *fpst, uint32_t desc)
 {
     intptr_t row, col, oprsz = simd_oprsz(desc) / 8;
     uint64_t neg = (uint64_t)simd_data(desc) << 63;
     uint64_t *za = vza, *zn = vzn, *zm = vzm;
     uint8_t *pn = vpn, *pm = vpm;
-    float_status fpst = *fpst_in;
-
-    set_default_nan_mode(true, &fpst);
 
     for (row = 0; row < oprsz; ++row) {
         if (pn[H1(row)] & 1) {
@@ -XXX,XX +XXX,XX @@ void HELPER(sme_fmopa_d)(void *vza, void *vzn, void *vzm, void *vpn,
             for (col = 0; col < oprsz; ++col) {
                 if (pm[H1(col)] & 1) {
                     uint64_t *a = &za_row[col];
-                    *a = float64_muladd(n, zm[col], *a, 0, &fpst);
+                    *a = float64_muladd(n, zm[col], *a, 0, fpst);
                 }
             }
         }
@@ -XXX,XX +XXX,XX @@ void HELPER(sme_fmopa_h)(void *vza, void *vzn, void *vzm, void *vpn,
     intptr_t row, col, oprsz = simd_maxsz(desc);
     uint32_t neg = simd_data(desc) * 0x80008000u;
     uint16_t *pn = vpn, *pm = vpm;
-    float_status fpst_odd, fpst_std, fpst_f16;
+    float_status fpst_odd = env->vfp.fp_status[FPST_ZA];
 
-    /*
-     * Make copies of the fp status fields we use, because this operation
-     * does not update the cumulative fp exception status.  It also
-     * produces default NaNs. We also need a second copy of fp_status with
-     * round-to-odd -- see above.
-     */
-    fpst_f16 = env->vfp.fp_status[FPST_A64_F16];
-    fpst_std = env->vfp.fp_status[FPST_A64];
-    set_default_nan_mode(true, &fpst_std);
-    set_default_nan_mode(true, &fpst_f16);
-    fpst_odd = fpst_std;
     set_float_rounding_mode(float_round_to_odd, &fpst_odd);
 
     for (row = 0; row < oprsz; ) {
@@ -XXX,XX +XXX,XX @@ void HELPER(sme_fmopa_h)(void *vza, void *vzn, void *vzm, void *vpn,
 
                         m = f16mop_adj_pair(m, pcol, 0);
                         *a = f16_dotadd(*a, n, m,
-                                        &fpst_f16, &fpst_std, &fpst_odd);
+                                        &env->vfp.fp_status[FPST_ZA_F16],
+                                        &env->vfp.fp_status[FPST_ZA],
+                                        &fpst_odd);
                     }
                     col += 4;
                     pcol >>= 4;
diff --git a/target/arm/tcg/translate-sme.c b/target/arm/tcg/translate-sme.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-sme.c
+++ b/target/arm/tcg/translate-sme.c
@@ -XXX,XX +XXX,XX @@ static bool do_outprod_env(DisasContext *s, arg_op *a, MemOp esz,
 TRANS_FEAT(FMOPA_h, aa64_sme, do_outprod_env, a,
            MO_32, gen_helper_sme_fmopa_h)
 TRANS_FEAT(FMOPA_s, aa64_sme, do_outprod_fpst, a,
-           MO_32, FPST_A64, gen_helper_sme_fmopa_s)
+           MO_32, FPST_ZA, gen_helper_sme_fmopa_s)
 TRANS_FEAT(FMOPA_d, aa64_sme_f64f64, do_outprod_fpst, a,
-           MO_64, FPST_A64, gen_helper_sme_fmopa_d)
+           MO_64, FPST_ZA, gen_helper_sme_fmopa_d)
 
 TRANS_FEAT(BFMOPA, aa64_sme, do_outprod_env, a, MO_32, gen_helper_sme_bfmopa)
 
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

The whole ZA state will also contain ZT0.
Make things easier in aarch64_set_svcr to zero both
by wrapping them in a common structure.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu.h               | 48 +++++++++++++++++++---------------
 linux-user/aarch64/signal.c    |  4 +--
 target/arm/cpu.c               |  4 +--
 target/arm/helper.c            |  2 +-
 target/arm/machine.c           |  2 +-
 target/arm/tcg/sme_helper.c    |  6 ++---
 target/arm/tcg/translate-sme.c |  4 +--
 7 files changed, 38 insertions(+), 32 deletions(-)

diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState {
 
     uint64_t scxtnum_el[4];
 
-    /*
-     * SME ZA storage -- 256 x 256 byte array, with bytes in host word order,
-     * as we do with vfp.zregs[].  This corresponds to the architectural ZA
-     * array, where ZA[N] is in the least-significant bytes of env->zarray[N].
-     * When SVL is less than the architectural maximum, the accessible
-     * storage is restricted, such that if the SVL is X bytes the guest can
-     * see only the bottom X elements of zarray[], and only the least
-     * significant X bytes of each element of the array. (In other words,
-     * the observable part is always square.)
-     *
-     * The ZA storage can also be considered as a set of square tiles of
-     * elements of different sizes. The mapping from tiles to the ZA array
-     * is architecturally defined, such that for tiles of elements of esz
-     * bytes, the Nth row (or "horizontal slice") of tile T is in
-     * ZA[T + N * esz]. Note that this means that each tile is not contiguous
-     * in the ZA storage, because its rows are striped through the ZA array.
-     *
-     * Because this is so large, keep this toward the end of the reset area,
-     * to keep the offsets into the rest of the structure smaller.
-     */
-    ARMVectorReg zarray[ARM_MAX_VQ * 16];
+    struct {
+        /*
+         * SME ZA storage -- 256 x 256 byte array, with bytes in host
+         * word order, as we do with vfp.zregs[].  This corresponds to
+         * the architectural ZA array, where ZA[N] is in the least
+         * significant bytes of env->za_state.za[N].
+         *
+         * When SVL is less than the architectural maximum, the accessible
+         * storage is restricted, such that if the SVL is X bytes the guest
+         * can see only the bottom X elements of zarray[], and only the least
+         * significant X bytes of each element of the array. (In other words,
+         * the observable part is always square.)
+         *
+         * The ZA storage can also be considered as a set of square tiles of
+         * elements of different sizes. The mapping from tiles to the ZA array
+         * is architecturally defined, such that for tiles of elements of esz
+         * bytes, the Nth row (or "horizontal slice") of tile T is in
+         * ZA[T + N * esz]. Note that this means that each tile is not
+         * contiguous in the ZA storage, because its rows are striped through
+         * the ZA array.
+         *
+         * Because this is so large, keep this toward the end of the
+         * reset area, to keep the offsets into the rest of the structure
+         * smaller.
+         */
+        ARMVectorReg za[ARM_MAX_VQ * 16];
+    } za_state;
 
     struct CPUBreakpoint *cpu_breakpoint[16];
     struct CPUWatchpoint *cpu_watchpoint[16];
diff --git a/linux-user/aarch64/signal.c b/linux-user/aarch64/signal.c
index XXXXXXX..XXXXXXX 100644
--- a/linux-user/aarch64/signal.c
+++ b/linux-user/aarch64/signal.c
@@ -XXX,XX +XXX,XX @@ static void target_setup_za_record(struct target_za_context *za,
     for (i = 0; i < vl; ++i) {
         uint64_t *z = (void *)za + TARGET_ZA_SIG_ZAV_OFFSET(vq, i);
         for (j = 0; j < vq * 2; ++j) {
-            __put_user_e(env->zarray[i].d[j], z + j, le);
+            __put_user_e(env->za_state.za[i].d[j], z + j, le);
         }
     }
 }
@@ -XXX,XX +XXX,XX @@ static bool target_restore_za_record(CPUARMState *env,
     for (i = 0; i < vl; ++i) {
         uint64_t *z = (void *)za + TARGET_ZA_SIG_ZAV_OFFSET(vq, i);
         for (j = 0; j < vq * 2; ++j) {
-            __get_user_e(env->zarray[i].d[j], z + j, le);
+            __get_user_e(env->za_state.za[i].d[j], z + j, le);
         }
     }
     return true;
diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -XXX,XX +XXX,XX @@ static void aarch64_cpu_dump_state(CPUState *cs, FILE *f, int flags)
             qemu_fprintf(f, "ZA[%0*d]=", svl_lg10, i);
             for (j = zcr_len; j >= 0; --j) {
                 qemu_fprintf(f, "%016" PRIx64 ":%016" PRIx64 "%c",
-                             env->zarray[i].d[2 * j + 1],
-                             env->zarray[i].d[2 * j],
+                             env->za_state.za[i].d[2 * j + 1],
+                             env->za_state.za[i].d[2 * j],
                              j ? ':' : '\n');
             }
         }
diff --git a/target/arm/helper.c b/target/arm/helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -XXX,XX +XXX,XX @@ void aarch64_set_svcr(CPUARMState *env, uint64_t new, uint64_t mask)
      * when disabled either.
      */
     if (change & new & R_SVCR_ZA_MASK) {
-        memset(env->zarray, 0, sizeof(env->zarray));
+        memset(&env->za_state, 0, sizeof(env->za_state));
     }
 
     if (tcg_enabled()) {
diff --git a/target/arm/machine.c b/target/arm/machine.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/machine.c
+++ b/target/arm/machine.c
@@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_za = {
     .minimum_version_id = 1,
     .needed = za_needed,
     .fields = (const VMStateField[]) {
-        VMSTATE_STRUCT_ARRAY(env.zarray, ARMCPU, ARM_MAX_VQ * 16, 0,
+        VMSTATE_STRUCT_ARRAY(env.za_state.za, ARMCPU, ARM_MAX_VQ * 16, 0,
                              vmstate_vreg, ARMVectorReg),
         VMSTATE_END_OF_LIST()
     }
diff --git a/target/arm/tcg/sme_helper.c b/target/arm/tcg/sme_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/sme_helper.c
+++ b/target/arm/tcg/sme_helper.c
@@ -XXX,XX +XXX,XX @@ void helper_sme_zero(CPUARMState *env, uint32_t imm, uint32_t svl)
     uint32_t i;
 
     /*
-     * Special case clearing the entire ZA space.
+     * Special case clearing the entire ZArray.
      * This falls into the CONSTRAINED UNPREDICTABLE zeroing of any
      * parts of the ZA storage outside of SVL.
      */
     if (imm == 0xff) {
-        memset(env->zarray, 0, sizeof(env->zarray));
+        memset(env->za_state.za, 0, sizeof(env->za_state.za));
         return;
     }
 
@@ -XXX,XX +XXX,XX @@ void helper_sme_zero(CPUARMState *env, uint32_t imm, uint32_t svl)
      */
     for (i = 0; i < svl; i++) {
         if (imm & (1 << (i % 8))) {
-            memset(&env->zarray[i], 0, svl);
+            memset(&env->za_state.za[i], 0, svl);
         }
     }
 }
diff --git a/target/arm/tcg/translate-sme.c b/target/arm/tcg/translate-sme.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-sme.c
+++ b/target/arm/tcg/translate-sme.c
@@ -XXX,XX +XXX,XX @@ static TCGv_ptr get_tile_rowcol(DisasContext *s, int esz, int rs,
     offset = tile * sizeof(ARMVectorReg);
 
     /* Include the byte offset of zarray to make this relative to env. */
-    offset += offsetof(CPUARMState, zarray);
+    offset += offsetof(CPUARMState, za_state.za);
     tcg_gen_addi_i32(tmp, tmp, offset);
 
     /* Add the byte offset to env to produce the final pointer. */
@@ -XXX,XX +XXX,XX @@ static TCGv_ptr get_tile(DisasContext *s, int esz, int tile)
     TCGv_ptr addr = tcg_temp_new_ptr();
     int offset;
 
-    offset = tile * sizeof(ARMVectorReg) + offsetof(CPUARMState, zarray);
+    offset = tile * sizeof(ARMVectorReg) + offsetof(CPUARMState, za_state.za);
 
     tcg_gen_addi_ptr(addr, tcg_env, offset);
     return addr;
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu-features.h | 63 +++++++++++++++++++++++++++++++++++++++
 target/arm/cpu.h          |  1 +
 2 files changed, 64 insertions(+)

diff --git a/target/arm/cpu-features.h b/target/arm/cpu-features.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu-features.h
+++ b/target/arm/cpu-features.h
@@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa64_rpres(const ARMISARegisters *id)
     return FIELD_EX64_IDREG(id, ID_AA64ISAR2, RPRES);
 }
 
+static inline bool isar_feature_aa64_lut(const ARMISARegisters *id)
+{
+    return FIELD_EX64_IDREG(id, ID_AA64ISAR2, LUT);
+}
+
 static inline bool isar_feature_aa64_fp_simd(const ARMISARegisters *id)
 {
     /* We always set the AdvSIMD and FP fields identically.  */
@@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa64_sve2(const ARMISARegisters *id)
     return FIELD_EX64_IDREG(id, ID_AA64ZFR0, SVEVER) != 0;
 }
 
+static inline bool isar_feature_aa64_sve2p1(const ARMISARegisters *id)
+{
+    return FIELD_EX64_IDREG(id, ID_AA64ZFR0, SVEVER) >=2;
+}
+
 static inline bool isar_feature_aa64_sve2_aes(const ARMISARegisters *id)
 {
     return FIELD_EX64_IDREG(id, ID_AA64ZFR0, AES) != 0;
@@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa64_sve_f64mm(const ARMISARegisters *id)
     return FIELD_EX64_IDREG(id, ID_AA64ZFR0, F64MM) != 0;
 }
 
+static inline bool isar_feature_aa64_sve_b16b16(const ARMISARegisters *id)
+{
+    return FIELD_EX64_IDREG(id, ID_AA64ZFR0, B16B16);
+}
+
+static inline bool isar_feature_aa64_sme_b16b16(const ARMISARegisters *id)
+{
+    return FIELD_EX64_IDREG(id, ID_AA64SMFR0, B16B16);
+}
+
+static inline bool isar_feature_aa64_sme_f16f16(const ARMISARegisters *id)
+{
+    return FIELD_EX64_IDREG(id, ID_AA64SMFR0, F16F16);
+}
+
 static inline bool isar_feature_aa64_sme_f64f64(const ARMISARegisters *id)
 {
     return FIELD_EX64_IDREG(id, ID_AA64SMFR0, F64F64);
@@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa64_sme_fa64(const ARMISARegisters *id)
     return FIELD_EX64_IDREG(id, ID_AA64SMFR0, FA64);
 }
 
+static inline bool isar_feature_aa64_sme2(const ARMISARegisters *id)
+{
+    return FIELD_EX64_IDREG(id, ID_AA64SMFR0, SMEVER) != 0;
+}
+
+static inline bool isar_feature_aa64_sme2p1(const ARMISARegisters *id)
+{
+    return FIELD_EX64_IDREG(id, ID_AA64SMFR0, SMEVER) >= 2;
+}
+
+/*
+ * Combinations of feature tests, for ease of use with TRANS_FEAT.
+ */
+static inline bool isar_feature_aa64_sme_or_sve2p1(const ARMISARegisters *id)
+{
+    return isar_feature_aa64_sme(id) || isar_feature_aa64_sve2p1(id);
+}
+
+static inline bool isar_feature_aa64_sme2_or_sve2p1(const ARMISARegisters *id)
+{
+    return isar_feature_aa64_sme2(id) || isar_feature_aa64_sve2p1(id);
+}
+
+static inline bool isar_feature_aa64_sme2p1_or_sve2p1(const ARMISARegisters *id)
+{
+    return isar_feature_aa64_sme2p1(id) || isar_feature_aa64_sve2p1(id);
+}
+
+static inline bool isar_feature_aa64_sme2_i16i64(const ARMISARegisters *id)
+{
+    return isar_feature_aa64_sme2(id) && isar_feature_aa64_sme_i16i64(id);
+}
+
+static inline bool isar_feature_aa64_sme2_f64f64(const ARMISARegisters *id)
+{
+    return isar_feature_aa64_sme2(id) && isar_feature_aa64_sme_f64f64(id);
+}
+
 /*
  * Feature tests for "does this exist in either 32-bit or 64-bit?"
  */
diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -XXX,XX +XXX,XX @@ FIELD(ID_AA64ISAR2, SYSINSTR_128, 36, 4)
 FIELD(ID_AA64ISAR2, PRFMSLC, 40, 4)
 FIELD(ID_AA64ISAR2, RPRFM, 48, 4)
 FIELD(ID_AA64ISAR2, CSSC, 52, 4)
+FIELD(ID_AA64ISAR2, LUT, 56, 4)
 FIELD(ID_AA64ISAR2, ATS1A, 60, 4)
 
 FIELD(ID_AA64PFR0, EL0, 0, 4)
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

This is a 512-bit array introduced with SME2.
Save it only when ZA is in use.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu.h     |  3 +++
 target/arm/machine.c | 20 ++++++++++++++++++++
 2 files changed, 23 insertions(+)

diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState {
     uint64_t scxtnum_el[4];
 
     struct {
+        /* SME2 ZT0 -- 512 bit array, with data ordered like ARMVectorReg. */
+        uint64_t zt0[512 / 64] QEMU_ALIGNED(16);
+
         /*
          * SME ZA storage -- 256 x 256 byte array, with bytes in host
          * word order, as we do with vfp.zregs[].  This corresponds to
diff --git a/target/arm/machine.c b/target/arm/machine.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/machine.c
+++ b/target/arm/machine.c
@@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_za = {
     }
 };
 
+static bool zt0_needed(void *opaque)
+{
+    ARMCPU *cpu = opaque;
+
+    return za_needed(cpu) && cpu_isar_feature(aa64_sme2, cpu);
+}
+
+static const VMStateDescription vmstate_zt0 = {
+    .name = "cpu/zt0",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .needed = zt0_needed,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT64_ARRAY(env.za_state.zt0, ARMCPU,
+                             ARRAY_SIZE(((CPUARMState *)0)->za_state.zt0)),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
 static bool serror_needed(void *opaque)
 {
     ARMCPU *cpu = opaque;
@@ -XXX,XX +XXX,XX @@ const VMStateDescription vmstate_arm_cpu = {
         &vmstate_m_security,
         &vmstate_sve,
         &vmstate_za,
+        &vmstate_zt0,
         &vmstate_serror,
         &vmstate_irq_line_state,
         &vmstate_wfxt_timer,
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Pipe the value through from SMCR_ELx through hflags and into
the disassembly context.  Enable EZT0 in smcr_write.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu.h               |  2 ++
 target/arm/tcg/translate.h     |  1 +
 target/arm/cpu.c               |  3 +++
 target/arm/helper.c            |  6 +++++-
 target/arm/tcg/hflags.c        | 34 +++++++++++++++++++++++++++++++++-
 target/arm/tcg/translate-a64.c |  1 +
 6 files changed, 45 insertions(+), 2 deletions(-)

diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -XXX,XX +XXX,XX @@ FIELD(SVCR, ZA, 1, 1)
 
 /* Fields for SMCR_ELx. */
 FIELD(SMCR, LEN, 0, 4)
+FIELD(SMCR, EZT0, 30, 1)
 FIELD(SMCR, FA64, 31, 1)
 
 /* Write a new value to v7m.exception, thus transitioning into or out
@@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A64, NV2_MEM_E20, 35, 1)
 FIELD(TBFLAG_A64, NV2_MEM_BE, 36, 1)
 FIELD(TBFLAG_A64, AH, 37, 1)   /* FPCR.AH */
 FIELD(TBFLAG_A64, NEP, 38, 1)   /* FPCR.NEP */
+FIELD(TBFLAG_A64, ZT0EXC_EL, 39, 2)
 
 /*
  * Helpers for using the above. Note that only the A64 accessors use
diff --git a/target/arm/tcg/translate.h b/target/arm/tcg/translate.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate.h
+++ b/target/arm/tcg/translate.h
@@ -XXX,XX +XXX,XX @@ typedef struct DisasContext {
     int fp_excp_el; /* FP exception EL or 0 if enabled */
     int sve_excp_el; /* SVE exception EL or 0 if enabled */
     int sme_excp_el; /* SME exception EL or 0 if enabled */
+    int zt0_excp_el; /* ZT0 exception EL or 0 if enabled */
     int vl;          /* current vector length in bytes */
     int svl;         /* current streaming vector length in bytes */
     bool vfp_enabled; /* FP enabled via FPSCR.EN */
diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -XXX,XX +XXX,XX @@ void arm_emulate_firmware_reset(CPUState *cpustate, int target_el)
                 env->cp15.cptr_el[3] |= R_CPTR_EL3_ESM_MASK;
                 env->cp15.scr_el3 |= SCR_ENTP2;
                 env->vfp.smcr_el[3] = 0xf;
+                if (cpu_isar_feature(aa64_sme2, cpu)) {
+                    env->vfp.smcr_el[3] |= R_SMCR_EZT0_MASK;
+                }
             }
             if (cpu_isar_feature(aa64_hcx, cpu)) {
                 env->cp15.scr_el3 |= SCR_HXEN;
diff --git a/target/arm/helper.c b/target/arm/helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -XXX,XX +XXX,XX @@ static void smcr_write(CPUARMState *env, const ARMCPRegInfo *ri,
 {
     int cur_el = arm_current_el(env);
     int old_len = sve_vqm1_for_el(env, cur_el);
+    uint64_t valid_mask = R_SMCR_LEN_MASK | R_SMCR_FA64_MASK;
     int new_len;
 
     QEMU_BUILD_BUG_ON(ARM_MAX_VQ > R_SMCR_LEN_MASK + 1);
-    value &= R_SMCR_LEN_MASK | R_SMCR_FA64_MASK;
+    if (cpu_isar_feature(aa64_sme2, env_archcpu(env))) {
+        valid_mask |= R_SMCR_EZT0_MASK;
+    }
+    value &= valid_mask;
     raw_write(env, ri, value);
 
     /*
diff --git a/target/arm/tcg/hflags.c b/target/arm/tcg/hflags.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/hflags.c
+++ b/target/arm/tcg/hflags.c
@@ -XXX,XX +XXX,XX @@ static CPUARMTBFlags rebuild_hflags_a32(CPUARMState *env, int fp_el,
     return rebuild_hflags_common_32(env, fp_el, mmu_idx, flags);
 }
 
+/*
+ * Return the exception level to which exceptions should be taken for ZT0.
+ * C.f. the ARM pseudocode function CheckSMEZT0Enabled, after the ZA check.
+ */
+static int zt0_exception_el(CPUARMState *env, int el)
+{
+#ifndef CONFIG_USER_ONLY
+    if (el <= 1
+        && !el_is_in_host(env, el)
+        && !FIELD_EX64(env->vfp.smcr_el[1], SMCR, EZT0)) {
+        return 1;
+    }
+    if (el <= 2
+        && arm_is_el2_enabled(env)
+        && !FIELD_EX64(env->vfp.smcr_el[2], SMCR, EZT0)) {
+        return 2;
+    }
+    if (arm_feature(env, ARM_FEATURE_EL3)
+        && !FIELD_EX64(env->vfp.smcr_el[3], SMCR, EZT0)) {
+        return 3;
+    }
+#endif
+    return 0;
+}
+
 static CPUARMTBFlags rebuild_hflags_a64(CPUARMState *env, int el, int fp_el,
                                         ARMMMUIdx mmu_idx)
 {
@@ -XXX,XX +XXX,XX @@ static CPUARMTBFlags rebuild_hflags_a64(CPUARMState *env, int el, int fp_el,
             DP_TBFLAG_A64(flags, PSTATE_SM, 1);
             DP_TBFLAG_A64(flags, SME_TRAP_NONSTREAMING, !sme_fa64(env, el));
         }
-        DP_TBFLAG_A64(flags, PSTATE_ZA, FIELD_EX64(env->svcr, SVCR, ZA));
+
+        if (FIELD_EX64(env->svcr, SVCR, ZA)) {
+            DP_TBFLAG_A64(flags, PSTATE_ZA, 1);
+            if (cpu_isar_feature(aa64_sme2, env_archcpu(env))) {
+                int zt0_el = zt0_exception_el(env, el);
+                DP_TBFLAG_A64(flags, ZT0EXC_EL, zt0_el);
+            }
+        }
     }
 
     sctlr = regime_sctlr(env, stage1);
diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-a64.c
+++ b/target/arm/tcg/translate-a64.c
@@ -XXX,XX +XXX,XX @@ static void aarch64_tr_init_disas_context(DisasContextBase *dcbase,
     dc->trap_eret = EX_TBFLAG_A64(tb_flags, TRAP_ERET);
     dc->sve_excp_el = EX_TBFLAG_A64(tb_flags, SVEEXC_EL);
     dc->sme_excp_el = EX_TBFLAG_A64(tb_flags, SMEEXC_EL);
+    dc->zt0_excp_el = EX_TBFLAG_A64(tb_flags, ZT0EXC_EL);
     dc->vl = (EX_TBFLAG_A64(tb_flags, VL) + 1) * 16;
     dc->svl = (EX_TBFLAG_A64(tb_flags, SVL) + 1) * 16;
     dc->pauth_active = EX_TBFLAG_A64(tb_flags, PAUTH_ACTIVE);
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h          |  1 +
 target/arm/tcg/sme.decode      |  1 +
 target/arm/tcg/translate-sme.c | 26 ++++++++++++++++++++++++++
 3 files changed, 28 insertions(+)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ typedef enum {
     SME_ET_Streaming,
     SME_ET_NotStreaming,
     SME_ET_InactiveZA,
+    SME_ET_InaccessibleZT0,
 } SMEExceptionType;
 
 #define ARM_EL_EC_LENGTH 6
diff --git a/target/arm/tcg/sme.decode b/target/arm/tcg/sme.decode
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/sme.decode
+++ b/target/arm/tcg/sme.decode
@@ -XXX,XX +XXX,XX @@
 ### SME Misc
 
 ZERO            11000000 00 001 00000000000 imm:8
+ZERO_zt0        11000000 01 001 00000000000 00000001
 
 ### SME Move into/from Array
 
diff --git a/target/arm/tcg/translate-sme.c b/target/arm/tcg/translate-sme.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-sme.c
+++ b/target/arm/tcg/translate-sme.c
@@ -XXX,XX +XXX,XX @@
 
 #include "decode-sme.c.inc"
 
+static bool sme2_zt0_enabled_check(DisasContext *s)
+{
+    if (!sme_za_enabled_check(s)) {
+        return false;
+    }
+    if (s->zt0_excp_el) {
+        gen_exception_insn_el(s, 0, EXCP_UDEF,
+                              syn_smetrap(SME_ET_InaccessibleZT0, false),
+                              s->zt0_excp_el);
+        return false;
+    }
+    return true;
+}
 
 /*
  * Resolve tile.size[index] to a host pointer, where tile and index
@@ -XXX,XX +XXX,XX @@ static bool trans_ZERO(DisasContext *s, arg_ZERO *a)
     return true;
 }
 
+static bool trans_ZERO_zt0(DisasContext *s, arg_ZERO_zt0 *a)
+{
+    if (!dc_isar_feature(aa64_sme2, s)) {
+        return false;
+    }
+    if (sme_enabled_check(s) && sme2_zt0_enabled_check(s)) {
+        tcg_gen_gvec_dup_imm(MO_64, offsetof(CPUARMState, za_state.zt0),
+                             sizeof_field(CPUARMState, za_state.zt0),
+                             sizeof_field(CPUARMState, za_state.zt0), 0);
+    }
+    return true;
+}
+
 static bool trans_MOVA(DisasContext *s, arg_MOVA *a)
 {
     static gen_helper_gvec_4 * const h_fns[5] = {
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Honor AlignmentEnforced() for LDR/STR (vector),
(predicate), and (array vector).

Within the expansion functions, clear @align when we're
done emitting loads at the largest size.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-19-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/translate-a64.h |  6 ++--
 target/arm/tcg/translate-sme.c |  5 ++--
 target/arm/tcg/translate-sve.c | 50 ++++++++++++++++++++++++----------
 3 files changed, 42 insertions(+), 19 deletions(-)

diff --git a/target/arm/tcg/translate-a64.h b/target/arm/tcg/translate-a64.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-a64.h
+++ b/target/arm/tcg/translate-a64.h
@@ -XXX,XX +XXX,XX @@ void gen_gvec_usqadd_qc(unsigned vece, uint32_t rd_ofs,
                         uint32_t rn_ofs, uint32_t rm_ofs,
                         uint32_t opr_sz, uint32_t max_sz);
 
-void gen_sve_ldr(DisasContext *s, TCGv_ptr, int vofs, int len, int rn, int imm);
-void gen_sve_str(DisasContext *s, TCGv_ptr, int vofs, int len, int rn, int imm);
+void gen_sve_ldr(DisasContext *s, TCGv_ptr, int vofs,
+                 int len, int rn, int imm, MemOp align);
+void gen_sve_str(DisasContext *s, TCGv_ptr, int vofs,
+                 int len, int rn, int imm, MemOp align);
 
 #endif /* TARGET_ARM_TRANSLATE_A64_H */
diff --git a/target/arm/tcg/translate-sme.c b/target/arm/tcg/translate-sme.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-sme.c
+++ b/target/arm/tcg/translate-sme.c
@@ -XXX,XX +XXX,XX @@ static bool trans_LDST1(DisasContext *s, arg_LDST1 *a)
     return true;
 }
 
-typedef void GenLdStR(DisasContext *, TCGv_ptr, int, int, int, int);
+typedef void GenLdStR(DisasContext *, TCGv_ptr, int, int, int, int, MemOp);
 
 static bool do_ldst_r(DisasContext *s, arg_ldstr *a, GenLdStR *fn)
 {
@@ -XXX,XX +XXX,XX @@ static bool do_ldst_r(DisasContext *s, arg_ldstr *a, GenLdStR *fn)
     /* ZA[n] equates to ZA0H.B[n]. */
     base = get_tile_rowcol(s, MO_8, a->rv, imm, false);
 
-    fn(s, base, 0, svl, a->rn, imm * svl);
+    fn(s, base, 0, svl, a->rn, imm * svl,
+       s->align_mem ? MO_ALIGN_16 : MO_UNALN);
     return true;
 }
 
diff --git a/target/arm/tcg/translate-sve.c b/target/arm/tcg/translate-sve.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-sve.c
+++ b/target/arm/tcg/translate-sve.c
@@ -XXX,XX +XXX,XX @@ TRANS_FEAT(UCVTF_dd, aa64_sve, gen_gvec_fpst_arg_zpz,
  */
 
 void gen_sve_ldr(DisasContext *s, TCGv_ptr base, int vofs,
-                 int len, int rn, int imm)
+                 int len, int rn, int imm, MemOp align)
 {
     int len_align = QEMU_ALIGN_DOWN(len, 16);
     int len_remain = len % 16;
@@ -XXX,XX +XXX,XX @@ void gen_sve_ldr(DisasContext *s, TCGv_ptr base, int vofs,
 
         for (i = 0; i < len_align; i += 16) {
             tcg_gen_qemu_ld_i128(t16, clean_addr, midx,
-                                 MO_LE | MO_128 | MO_ATOM_NONE);
+                                 MO_LE | MO_128 | MO_ATOM_NONE | align);
             tcg_gen_extr_i128_i64(t0, t1, t16);
             tcg_gen_st_i64(t0, base, vofs + i);
             tcg_gen_st_i64(t1, base, vofs + i + 8);
             tcg_gen_addi_i64(clean_addr, clean_addr, 16);
         }
+        if (len_align) {
+            align = MO_UNALN;
+        }
     } else {
         TCGLabel *loop = gen_new_label();
         TCGv_ptr tp, i = tcg_temp_new_ptr();
@@ -XXX,XX +XXX,XX @@ void gen_sve_ldr(DisasContext *s, TCGv_ptr base, int vofs,
 
         t16 = tcg_temp_new_i128();
         tcg_gen_qemu_ld_i128(t16, clean_addr, midx,
-                             MO_LE | MO_128 | MO_ATOM_NONE);
+                             MO_LE | MO_128 | MO_ATOM_NONE | align);
         tcg_gen_addi_i64(clean_addr, clean_addr, 16);
 
         tp = tcg_temp_new_ptr();
@@ -XXX,XX +XXX,XX @@ void gen_sve_ldr(DisasContext *s, TCGv_ptr base, int vofs,
         tcg_gen_st_i64(t1, tp, vofs + 8);
 
         tcg_gen_brcondi_ptr(TCG_COND_LTU, i, len_align, loop);
+        align = MO_UNALN;
     }
 
     /*
@@ -XXX,XX +XXX,XX @@ void gen_sve_ldr(DisasContext *s, TCGv_ptr base, int vofs,
      */
     if (len_remain >= 8) {
         t0 = tcg_temp_new_i64();
-        tcg_gen_qemu_ld_i64(t0, clean_addr, midx, MO_LEUQ | MO_ATOM_NONE);
+        tcg_gen_qemu_ld_i64(t0, clean_addr, midx,
+                            MO_LEUQ | MO_ATOM_NONE | align);
+        align = MO_UNALN;
         tcg_gen_st_i64(t0, base, vofs + len_align);
         len_remain -= 8;
         len_align += 8;
@@ -XXX,XX +XXX,XX @@ void gen_sve_ldr(DisasContext *s, TCGv_ptr base, int vofs,
         case 4:
         case 8:
             tcg_gen_qemu_ld_i64(t0, clean_addr, midx,
-                                MO_LE | ctz32(len_remain) | MO_ATOM_NONE);
+                                MO_LE | ctz32(len_remain)
+                                | MO_ATOM_NONE | align);
             break;
 
         case 6:
             t1 = tcg_temp_new_i64();
-            tcg_gen_qemu_ld_i64(t0, clean_addr, midx, MO_LEUL | MO_ATOM_NONE);
+            tcg_gen_qemu_ld_i64(t0, clean_addr, midx,
+                                MO_LEUL | MO_ATOM_NONE | align);
             tcg_gen_addi_i64(clean_addr, clean_addr, 4);
             tcg_gen_qemu_ld_i64(t1, clean_addr, midx, MO_LEUW | MO_ATOM_NONE);
             tcg_gen_deposit_i64(t0, t0, t1, 32, 32);
@@ -XXX,XX +XXX,XX @@ void gen_sve_ldr(DisasContext *s, TCGv_ptr base, int vofs,
 
 /* Similarly for stores.  */
 void gen_sve_str(DisasContext *s, TCGv_ptr base, int vofs,
-                 int len, int rn, int imm)
+                 int len, int rn, int imm, MemOp align)
 {
     int len_align = QEMU_ALIGN_DOWN(len, 16);
     int len_remain = len % 16;
@@ -XXX,XX +XXX,XX @@ void gen_sve_str(DisasContext *s, TCGv_ptr base, int vofs,
             tcg_gen_ld_i64(t1, base, vofs + i + 8);
             tcg_gen_concat_i64_i128(t16, t0, t1);
             tcg_gen_qemu_st_i128(t16, clean_addr, midx,
-                                 MO_LE | MO_128 | MO_ATOM_NONE);
+                                 MO_LE | MO_128 | MO_ATOM_NONE | align);
             tcg_gen_addi_i64(clean_addr, clean_addr, 16);
         }
+        if (len_align) {
+            align = MO_UNALN;
+        }
     } else {
         TCGLabel *loop = gen_new_label();
         TCGv_ptr tp, i = tcg_temp_new_ptr();
@@ -XXX,XX +XXX,XX @@ void gen_sve_str(DisasContext *s, TCGv_ptr base, int vofs,
         tcg_gen_addi_i64(clean_addr, clean_addr, 16);
 
         tcg_gen_brcondi_ptr(TCG_COND_LTU, i, len_align, loop);
+        align = MO_UNALN;
     }
 
     /* Predicate register stores can be any multiple of 2.  */
     if (len_remain >= 8) {
         t0 = tcg_temp_new_i64();
         tcg_gen_ld_i64(t0, base, vofs + len_align);
-        tcg_gen_qemu_st_i64(t0, clean_addr, midx, MO_LEUQ | MO_ATOM_NONE);
+        tcg_gen_qemu_st_i64(t0, clean_addr, midx,
+                            MO_LEUQ | MO_ATOM_NONE | align);
+        align = MO_UNALN;
         len_remain -= 8;
         len_align += 8;
         if (len_remain) {
@@ -XXX,XX +XXX,XX @@ void gen_sve_str(DisasContext *s, TCGv_ptr base, int vofs,
         case 4:
         case 8:
             tcg_gen_qemu_st_i64(t0, clean_addr, midx,
-                                MO_LE | ctz32(len_remain) | MO_ATOM_NONE);
+                                MO_LE | ctz32(len_remain)
+                                | MO_ATOM_NONE | align);
             break;
 
         case 6:
-            tcg_gen_qemu_st_i64(t0, clean_addr, midx, MO_LEUL | MO_ATOM_NONE);
+            tcg_gen_qemu_st_i64(t0, clean_addr, midx,
+                                MO_LEUL | MO_ATOM_NONE | align);
             tcg_gen_addi_i64(clean_addr, clean_addr, 4);
             tcg_gen_shri_i64(t0, t0, 32);
             tcg_gen_qemu_st_i64(t0, clean_addr, midx, MO_LEUW | MO_ATOM_NONE);
@@ -XXX,XX +XXX,XX @@ static bool trans_LDR_zri(DisasContext *s, arg_rri *a)
     if (sve_access_check(s)) {
         int size = vec_full_reg_size(s);
         int off = vec_full_reg_offset(s, a->rd);
-        gen_sve_ldr(s, tcg_env, off, size, a->rn, a->imm * size);
+        gen_sve_ldr(s, tcg_env, off, size, a->rn, a->imm * size,
+                    s->align_mem ? MO_ALIGN_16 : MO_UNALN);
     }
     return true;
 }
@@ -XXX,XX +XXX,XX @@ static bool trans_LDR_pri(DisasContext *s, arg_rri *a)
     if (sve_access_check(s)) {
         int size = pred_full_reg_size(s);
         int off = pred_full_reg_offset(s, a->rd);
-        gen_sve_ldr(s, tcg_env, off, size, a->rn, a->imm * size);
+        gen_sve_ldr(s, tcg_env, off, size, a->rn, a->imm * size,
+                    s->align_mem ? MO_ALIGN_2 : MO_UNALN);
     }
     return true;
 }
@@ -XXX,XX +XXX,XX @@ static bool trans_STR_zri(DisasContext *s, arg_rri *a)
     if (sve_access_check(s)) {
         int size = vec_full_reg_size(s);
         int off = vec_full_reg_offset(s, a->rd);
-        gen_sve_str(s, tcg_env, off, size, a->rn, a->imm * size);
+        gen_sve_str(s, tcg_env, off, size, a->rn, a->imm * size,
+                    s->align_mem ? MO_ALIGN_16 : MO_UNALN);
     }
     return true;
 }
@@ -XXX,XX +XXX,XX @@ static bool trans_STR_pri(DisasContext *s, arg_rri *a)
     if (sve_access_check(s)) {
         int size = pred_full_reg_size(s);
         int off = pred_full_reg_offset(s, a->rd);
-        gen_sve_str(s, tcg_env, off, size, a->rn, a->imm * size);
+        gen_sve_str(s, tcg_env, off, size, a->rn, a->imm * size,
+                    s->align_mem ? MO_ALIGN_2 : MO_UNALN);
     }
     return true;
 }
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-20-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/sme.decode      |  6 ++++++
 target/arm/tcg/translate-sme.c | 13 +++++++++++++
 2 files changed, 19 insertions(+)

diff --git a/target/arm/tcg/sme.decode b/target/arm/tcg/sme.decode
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/sme.decode
+++ b/target/arm/tcg/sme.decode
@@ -XXX,XX +XXX,XX @@ LDST1           1110000 111     st:1 rm:5 v:1 .. pg:3 rn:5 0 za_imm:4  \
 LDR             1110000 100 0 000000 .. 000 ..... 0 ....        @ldstr
 STR             1110000 100 1 000000 .. 000 ..... 0 ....        @ldstr
 
+&ldstzt0        rn
+@ldstzt0        ....... ... . ...... .. ... rn:5  .....         &ldstzt0
+
+LDR_zt0         1110000 100 0 111111 00 000 ..... 00000         @ldstzt0
+STR_zt0         1110000 100 1 111111 00 000 ..... 00000         @ldstzt0
+
 ### SME Add Vector to Array
 
 &adda           zad zn pm pn
diff --git a/target/arm/tcg/translate-sme.c b/target/arm/tcg/translate-sme.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-sme.c
+++ b/target/arm/tcg/translate-sme.c
@@ -XXX,XX +XXX,XX @@ static bool do_ldst_r(DisasContext *s, arg_ldstr *a, GenLdStR *fn)
 TRANS_FEAT(LDR, aa64_sme, do_ldst_r, a, gen_sve_ldr)
 TRANS_FEAT(STR, aa64_sme, do_ldst_r, a, gen_sve_str)
 
+static bool do_ldst_zt0(DisasContext *s, arg_ldstzt0 *a, GenLdStR *fn)
+{
+    if (sme2_zt0_enabled_check(s)) {
+        fn(s, tcg_env, offsetof(CPUARMState, za_state.zt0),
+           sizeof_field(CPUARMState, za_state.zt0), a->rn, 0,
+           s->align_mem ? MO_ALIGN_16 : MO_UNALN);
+    }
+    return true;
+}
+
+TRANS_FEAT(LDR_zt0, aa64_sme2, do_ldst_zt0, a, gen_sve_ldr)
+TRANS_FEAT(STR_zt0, aa64_sme2, do_ldst_zt0, a, gen_sve_str)
+
 static bool do_adda(DisasContext *s, arg_adda *a, MemOp esz,
                     gen_helper_gvec_4 *fn)
 {
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/sme.decode      |  5 +++++
 target/arm/tcg/translate-sme.c | 13 +++++++++++++
 2 files changed, 18 insertions(+)

diff --git a/target/arm/tcg/sme.decode b/target/arm/tcg/sme.decode
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/sme.decode
+++ b/target/arm/tcg/sme.decode
@@ -XXX,XX +XXX,XX @@ MOVA            11000000 esz:2 00001 0 v:1 .. pg:3 0 za_imm:4 zr:5  \
 MOVA            11000000 11    00001 1 v:1 .. pg:3 0 za_imm:4 zr:5  \
                 &mova to_vec=1 rs=%mova_rs esz=4
 
+### SME Move into/from ZT0
+
+MOVT_rzt        1100 0000 0100 1100 0 off:3 00 11111 rt:5
+MOVT_ztr        1100 0000 0100 1110 0 off:3 00 11111 rt:5
+
 ### SME Memory
 
 &ldst           esz rs pg rn rm za_imm v:bool st:bool
diff --git a/target/arm/tcg/translate-sme.c b/target/arm/tcg/translate-sme.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-sme.c
+++ b/target/arm/tcg/translate-sme.c
@@ -XXX,XX +XXX,XX @@ static bool trans_MOVA(DisasContext *s, arg_MOVA *a)
     return true;
 }
 
+static bool do_movt(DisasContext *s, arg_MOVT_rzt *a,
+                    void (*func)(TCGv_i64, TCGv_ptr, tcg_target_long))
+{
+    if (sme2_zt0_enabled_check(s)) {
+        func(cpu_reg(s, a->rt), tcg_env,
+             offsetof(CPUARMState, za_state.zt0) + a->off * 8);
+    }
+    return true;
+}
+
+TRANS_FEAT(MOVT_rzt, aa64_sme2, do_movt, a, tcg_gen_ld_i64)
+TRANS_FEAT(MOVT_ztr, aa64_sme2, do_movt, a, tcg_gen_st_i64)
+
 static bool trans_LDST1(DisasContext *s, arg_LDST1 *a)
 {
     typedef void GenLdSt1(TCGv_env, TCGv_ptr, TCGv_ptr, TCGv, TCGv_i32);
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Decode tile number and index offset beforehand and separately.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-22-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/sme.decode      | 46 +++++++++++++++++++++++-----------
 target/arm/tcg/translate-sme.c | 17 +++++--------
 2 files changed, 38 insertions(+), 25 deletions(-)

diff --git a/target/arm/tcg/sme.decode b/target/arm/tcg/sme.decode
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/sme.decode
+++ b/target/arm/tcg/sme.decode
@@ -XXX,XX +XXX,XX @@ ZERO_zt0        11000000 01 001 00000000000 00000001
 ### SME Move into/from Array
 
 %mova_rs        13:2 !function=plus_12
-&mova           esz rs pg zr za_imm v:bool to_vec:bool
+&mova           esz rs pg zr za off v:bool to_vec:bool
 
-MOVA            11000000 esz:2 00000 0 v:1 .. pg:3 zr:5 0 za_imm:4  \
-                &mova to_vec=0 rs=%mova_rs
-MOVA            11000000 11    00000 1 v:1 .. pg:3 zr:5 0 za_imm:4  \
-                &mova to_vec=0 rs=%mova_rs esz=4
+MOVA            11000000 00 00000 0 v:1 .. pg:3 zr:5 0 off:4  \
+                &mova to_vec=0 rs=%mova_rs esz=0 za=0
+MOVA            11000000 01 00000 0 v:1 .. pg:3 zr:5 0 za:1 off:3  \
+                &mova to_vec=0 rs=%mova_rs esz=1
+MOVA            11000000 10 00000 0 v:1 .. pg:3 zr:5 0 za:2 off:2  \
+                &mova to_vec=0 rs=%mova_rs esz=2
+MOVA            11000000 11 00000 0 v:1 .. pg:3 zr:5 0 za:3 off:1  \
+                &mova to_vec=0 rs=%mova_rs esz=3
+MOVA            11000000 11 00000 1 v:1 .. pg:3 zr:5 0 za:4  \
+                &mova to_vec=0 rs=%mova_rs esz=4 off=0
 
-MOVA            11000000 esz:2 00001 0 v:1 .. pg:3 0 za_imm:4 zr:5  \
-                &mova to_vec=1 rs=%mova_rs
-MOVA            11000000 11    00001 1 v:1 .. pg:3 0 za_imm:4 zr:5  \
-                &mova to_vec=1 rs=%mova_rs esz=4
+MOVA            11000000 00 00001 0 v:1 .. pg:3 0 off:4      zr:5  \
+                &mova to_vec=1 rs=%mova_rs esz=0 za=0
+MOVA            11000000 01 00001 0 v:1 .. pg:3 0 za:1 off:3 zr:5  \
+                &mova to_vec=1 rs=%mova_rs esz=1
+MOVA            11000000 10 00001 0 v:1 .. pg:3 0 za:2 off:2 zr:5  \
+                &mova to_vec=1 rs=%mova_rs esz=2
+MOVA            11000000 11 00001 0 v:1 .. pg:3 0 za:3 off:1 zr:5  \
+                &mova to_vec=1 rs=%mova_rs esz=3
+MOVA            11000000 11 00001 1 v:1 .. pg:3 0 za:4       zr:5  \
+                &mova to_vec=1 rs=%mova_rs esz=4 off=0
 
 ### SME Move into/from ZT0
 
@@ -XXX,XX +XXX,XX @@ MOVT_ztr        1100 0000 0100 1110 0 off:3 00 11111 rt:5
 
 ### SME Memory
 
-&ldst           esz rs pg rn rm za_imm v:bool st:bool
+&ldst           esz rs pg rn rm za off v:bool st:bool
 
-LDST1           1110000 0 esz:2 st:1 rm:5 v:1 .. pg:3 rn:5 0 za_imm:4  \
-                &ldst rs=%mova_rs
-LDST1           1110000 111     st:1 rm:5 v:1 .. pg:3 rn:5 0 za_imm:4  \
-                &ldst esz=4 rs=%mova_rs
+LDST1           1110000 0 00 st:1 rm:5 v:1 .. pg:3 rn:5 0 off:4  \
+                &ldst rs=%mova_rs esz=0 za=0
+LDST1           1110000 0 01 st:1 rm:5 v:1 .. pg:3 rn:5 0 za:1 off:3  \
+                &ldst rs=%mova_rs esz=1
+LDST1           1110000 0 10 st:1 rm:5 v:1 .. pg:3 rn:5 0 za:2 off:2  \
+                &ldst rs=%mova_rs esz=2
+LDST1           1110000 0 11 st:1 rm:5 v:1 .. pg:3 rn:5 0 za:3 off:1  \
+                &ldst rs=%mova_rs esz=3
+LDST1           1110000 1 11 st:1 rm:5 v:1 .. pg:3 rn:5 0 za:4  \
+                &ldst rs=%mova_rs esz=4 off=0
 
 &ldstr          rv rn imm
 @ldstr          ....... ... . ...... .. ... rn:5 . imm:4 \
diff --git a/target/arm/tcg/translate-sme.c b/target/arm/tcg/translate-sme.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-sme.c
+++ b/target/arm/tcg/translate-sme.c
@@ -XXX,XX +XXX,XX @@ static bool sme2_zt0_enabled_check(DisasContext *s)
     return true;
 }
 
-/*
- * Resolve tile.size[index] to a host pointer, where tile and index
- * are always decoded together, dependent on the element size.
- */
+/* Resolve tile.size[rs+imm] to a host pointer. */
 static TCGv_ptr get_tile_rowcol(DisasContext *s, int esz, int rs,
-                                int tile_index, bool vertical)
+                                int tile, int imm, bool vertical)
 {
-    int tile = tile_index >> (4 - esz);
-    int index = esz == MO_128 ? 0 : extract32(tile_index, 0, 4 - esz);
     int pos, len, offset;
     TCGv_i32 tmp;
     TCGv_ptr addr;
@@ -XXX,XX +XXX,XX @@ static TCGv_ptr get_tile_rowcol(DisasContext *s, int esz, int rs,
     /* Compute the final index, which is Rs+imm. */
     tmp = tcg_temp_new_i32();
     tcg_gen_trunc_tl_i32(tmp, cpu_reg(s, rs));
-    tcg_gen_addi_i32(tmp, tmp, index);
+    tcg_gen_addi_i32(tmp, tmp, imm);
 
     /* Prepare a power-of-two modulo via extraction of @len bits. */
     len = ctz32(streaming_vec_reg_size(s)) - esz;
@@ -XXX,XX +XXX,XX @@ static bool trans_MOVA(DisasContext *s, arg_MOVA *a)
         return true;
     }
 
-    t_za = get_tile_rowcol(s, a->esz, a->rs, a->za_imm, a->v);
+    t_za = get_tile_rowcol(s, a->esz, a->rs, a->za, a->off, a->v);
     t_zr = vec_full_reg_ptr(s, a->zr);
     t_pg = pred_full_reg_ptr(s, a->pg);
 
@@ -XXX,XX +XXX,XX @@ static bool trans_LDST1(DisasContext *s, arg_LDST1 *a)
         return true;
     }
 
-    t_za = get_tile_rowcol(s, a->esz, a->rs, a->za_imm, a->v);
+    t_za = get_tile_rowcol(s, a->esz, a->rs, a->za, a->off, a->v);
     t_pg = pred_full_reg_ptr(s, a->pg);
     addr = tcg_temp_new_i64();
 
@@ -XXX,XX +XXX,XX @@ static bool do_ldst_r(DisasContext *s, arg_ldstr *a, GenLdStR *fn)
     }
 
     /* ZA[n] equates to ZA0H.B[n]. */
-    base = get_tile_rowcol(s, MO_8, a->rv, imm, false);
+    base = get_tile_rowcol(s, MO_8, a->rv, 0, imm, false);
 
     fn(s, base, 0, svl, a->rn, imm * svl,
        s->align_mem ? MO_ALIGN_16 : MO_UNALN);
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Prepare for more kinds of MOVA from SME2 by renaming the
existing SME1 MOVA to indicate tile to/from vector.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-23-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/sme.decode      | 42 +++++++++++++++++-----------------
 target/arm/tcg/translate-sme.c | 12 +++++-----
 2 files changed, 27 insertions(+), 27 deletions(-)

diff --git a/target/arm/tcg/sme.decode b/target/arm/tcg/sme.decode
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/sme.decode
+++ b/target/arm/tcg/sme.decode
@@ -XXX,XX +XXX,XX @@ ZERO_zt0        11000000 01 001 00000000000 00000001
 ### SME Move into/from Array
 
 %mova_rs        13:2 !function=plus_12
-&mova           esz rs pg zr za off v:bool to_vec:bool
+&mova_p         esz rs pg zr za off v:bool
 
-MOVA            11000000 00 00000 0 v:1 .. pg:3 zr:5 0 off:4  \
-                &mova to_vec=0 rs=%mova_rs esz=0 za=0
-MOVA            11000000 01 00000 0 v:1 .. pg:3 zr:5 0 za:1 off:3  \
-                &mova to_vec=0 rs=%mova_rs esz=1
-MOVA            11000000 10 00000 0 v:1 .. pg:3 zr:5 0 za:2 off:2  \
-                &mova to_vec=0 rs=%mova_rs esz=2
-MOVA            11000000 11 00000 0 v:1 .. pg:3 zr:5 0 za:3 off:1  \
-                &mova to_vec=0 rs=%mova_rs esz=3
-MOVA            11000000 11 00000 1 v:1 .. pg:3 zr:5 0 za:4  \
-                &mova to_vec=0 rs=%mova_rs esz=4 off=0
+MOVA_tz         11000000 00 00000 0 v:1 .. pg:3 zr:5 0 off:4  \
+                &mova_p rs=%mova_rs esz=0 za=0
+MOVA_tz         11000000 01 00000 0 v:1 .. pg:3 zr:5 0 za:1 off:3  \
+                &mova_p rs=%mova_rs esz=1
+MOVA_tz         11000000 10 00000 0 v:1 .. pg:3 zr:5 0 za:2 off:2  \
+                &mova_p rs=%mova_rs esz=2
+MOVA_tz         11000000 11 00000 0 v:1 .. pg:3 zr:5 0 za:3 off:1  \
+                &mova_p rs=%mova_rs esz=3
+MOVA_tz         11000000 11 00000 1 v:1 .. pg:3 zr:5 0 za:4  \
+                &mova_p rs=%mova_rs esz=4 off=0
 
-MOVA            11000000 00 00001 0 v:1 .. pg:3 0 off:4      zr:5  \
-                &mova to_vec=1 rs=%mova_rs esz=0 za=0
-MOVA            11000000 01 00001 0 v:1 .. pg:3 0 za:1 off:3 zr:5  \
-                &mova to_vec=1 rs=%mova_rs esz=1
-MOVA            11000000 10 00001 0 v:1 .. pg:3 0 za:2 off:2 zr:5  \
-                &mova to_vec=1 rs=%mova_rs esz=2
-MOVA            11000000 11 00001 0 v:1 .. pg:3 0 za:3 off:1 zr:5  \
-                &mova to_vec=1 rs=%mova_rs esz=3
-MOVA            11000000 11 00001 1 v:1 .. pg:3 0 za:4       zr:5  \
-                &mova to_vec=1 rs=%mova_rs esz=4 off=0
+MOVA_zt         11000000 00 00001 0 v:1 .. pg:3 0 off:4      zr:5  \
+                &mova_p rs=%mova_rs esz=0 za=0
+MOVA_zt         11000000 01 00001 0 v:1 .. pg:3 0 za:1 off:3 zr:5  \
+                &mova_p rs=%mova_rs esz=1
+MOVA_zt         11000000 10 00001 0 v:1 .. pg:3 0 za:2 off:2 zr:5  \
+                &mova_p rs=%mova_rs esz=2
+MOVA_zt         11000000 11 00001 0 v:1 .. pg:3 0 za:3 off:1 zr:5  \
+                &mova_p rs=%mova_rs esz=3
+MOVA_zt         11000000 11 00001 1 v:1 .. pg:3 0 za:4       zr:5  \
+                &mova_p rs=%mova_rs esz=4 off=0
 
 ### SME Move into/from ZT0
 
diff --git a/target/arm/tcg/translate-sme.c b/target/arm/tcg/translate-sme.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-sme.c
+++ b/target/arm/tcg/translate-sme.c
@@ -XXX,XX +XXX,XX @@ static bool trans_ZERO_zt0(DisasContext *s, arg_ZERO_zt0 *a)
     return true;
 }
 
-static bool trans_MOVA(DisasContext *s, arg_MOVA *a)
+static bool do_mova_tile(DisasContext *s, arg_mova_p *a, bool to_vec)
 {
     static gen_helper_gvec_4 * const h_fns[5] = {
         gen_helper_sve_sel_zpzz_b, gen_helper_sve_sel_zpzz_h,
@@ -XXX,XX +XXX,XX @@ static bool trans_MOVA(DisasContext *s, arg_MOVA *a)
     TCGv_i32 t_desc;
     int svl;
 
-    if (!dc_isar_feature(aa64_sme, s)) {
-        return false;
-    }
     if (!sme_smza_enabled_check(s)) {
         return true;
     }
@@ -XXX,XX +XXX,XX @@ static bool trans_MOVA(DisasContext *s, arg_MOVA *a)
 
     if (a->v) {
         /* Vertical slice -- use sme mova helpers. */
-        if (a->to_vec) {
+        if (to_vec) {
             zc_fns[a->esz](t_zr, t_za, t_pg, t_desc);
         } else {
             cz_fns[a->esz](t_za, t_zr, t_pg, t_desc);
         }
     } else {
         /* Horizontal slice -- reuse sve sel helpers. */
-        if (a->to_vec) {
+        if (to_vec) {
             h_fns[a->esz](t_zr, t_za, t_zr, t_pg, t_desc);
         } else {
             h_fns[a->esz](t_za, t_zr, t_za, t_pg, t_desc);
@@ -XXX,XX +XXX,XX @@ static bool trans_MOVA(DisasContext *s, arg_MOVA *a)
     return true;
 }
 
+TRANS_FEAT(MOVA_tz, aa64_sme, do_mova_tile, a, false)
+TRANS_FEAT(MOVA_zt, aa64_sme, do_mova_tile, a, true)
+
 static bool do_movt(DisasContext *s, arg_MOVT_rzt *a,
                     void (*func)(TCGv_i64, TCGv_ptr, tcg_target_long))
 {
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Prepare for MOVA array to/from vector with multiple registers
by adding a div_len parameter, herein always 1, and a vec_mod
parameter, herein always 0.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-24-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/translate-sme.c | 47 +++++++++++++++++++++++-----------
 1 file changed, 32 insertions(+), 15 deletions(-)

diff --git a/target/arm/tcg/translate-sme.c b/target/arm/tcg/translate-sme.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-sme.c
+++ b/target/arm/tcg/translate-sme.c
@@ -XXX,XX +XXX,XX @@ static bool sme2_zt0_enabled_check(DisasContext *s)
 
 /* Resolve tile.size[rs+imm] to a host pointer. */
 static TCGv_ptr get_tile_rowcol(DisasContext *s, int esz, int rs,
-                                int tile, int imm, bool vertical)
+                                int tile, int imm, int div_len,
+                                int vec_mod, bool vertical)
 {
     int pos, len, offset;
     TCGv_i32 tmp;
@@ -XXX,XX +XXX,XX @@ static TCGv_ptr get_tile_rowcol(DisasContext *s, int esz, int rs,
     /* Compute the final index, which is Rs+imm. */
     tmp = tcg_temp_new_i32();
     tcg_gen_trunc_tl_i32(tmp, cpu_reg(s, rs));
+    /*
+     * Round the vector index down to a multiple of vec_mod if necessary.
+     * We do this before adding the offset, to handle cases like
+     * MOVA (tile to vector, 2 registers) where we want to call this
+     * several times in a loop with an increasing offset. We rely on
+     * the instruction encodings always forcing the initial offset in
+     * [rs + offset] to be a multiple of vec_mod. The pseudocode usually
+     * does the round-down after adding the offset rather than before,
+     * but MOVA is an exception.
+     */
+    if (vec_mod > 1) {
+        tcg_gen_andc_i32(tmp, tmp, tcg_constant_i32(vec_mod - 1));
+    }
     tcg_gen_addi_i32(tmp, tmp, imm);
 
     /* Prepare a power-of-two modulo via extraction of @len bits. */
-    len = ctz32(streaming_vec_reg_size(s)) - esz;
+    len = ctz32(streaming_vec_reg_size(s) / div_len) - esz;
 
     if (!len) {
         /*
@@ -XXX,XX +XXX,XX @@ static TCGv_ptr get_tile_rowcol(DisasContext *s, int esz, int rs,
     return addr;
 }
 
+/* Resolve ZArray[rs+imm] to a host pointer. */
+static TCGv_ptr get_zarray(DisasContext *s, int rs, int imm,
+                           int div_len, int vec_mod)
+{
+    /* ZA[n] equates to ZA0H.B[n]. */
+    return get_tile_rowcol(s, MO_8, rs, 0, imm, div_len, vec_mod, false);
+}
+
 /*
  * Resolve tile.size[0] to a host pointer.
  * Used by e.g. outer product insns where we require the entire tile.
@@ -XXX,XX +XXX,XX @@ static bool do_mova_tile(DisasContext *s, arg_mova_p *a, bool to_vec)
         return true;
     }
 
-    t_za = get_tile_rowcol(s, a->esz, a->rs, a->za, a->off, a->v);
+    t_za = get_tile_rowcol(s, a->esz, a->rs, a->za, a->off, 1, 0, a->v);
     t_zr = vec_full_reg_ptr(s, a->zr);
     t_pg = pred_full_reg_ptr(s, a->pg);
 
@@ -XXX,XX +XXX,XX @@ static bool trans_LDST1(DisasContext *s, arg_LDST1 *a)
         return true;
     }
 
-    t_za = get_tile_rowcol(s, a->esz, a->rs, a->za, a->off, a->v);
+    t_za = get_tile_rowcol(s, a->esz, a->rs, a->za, a->off, 1, 0, a->v);
     t_pg = pred_full_reg_ptr(s, a->pg);
     addr = tcg_temp_new_i64();
 
@@ -XXX,XX +XXX,XX @@ typedef void GenLdStR(DisasContext *, TCGv_ptr, int, int, int, int, MemOp);
 
 static bool do_ldst_r(DisasContext *s, arg_ldstr *a, GenLdStR *fn)
 {
-    int svl = streaming_vec_reg_size(s);
-    int imm = a->imm;
-    TCGv_ptr base;
+    if (sme_za_enabled_check(s)) {
+        int svl = streaming_vec_reg_size(s);
+        int imm = a->imm;
+        TCGv_ptr base = get_zarray(s, a->rv, imm, 1, 0);
 
-    if (!sme_za_enabled_check(s)) {
-        return true;
+        fn(s, base, 0, svl, a->rn, imm * svl,
+           s->align_mem ? MO_ALIGN_16 : MO_UNALN);
     }
-
-    /* ZA[n] equates to ZA0H.B[n]. */
-    base = get_tile_rowcol(s, MO_8, a->rv, 0, imm, false);
-
-    fn(s, base, 0, svl, a->rn, imm * svl,
-       s->align_mem ? MO_ALIGN_16 : MO_UNALN);
     return true;
 }
 
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-25-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu.h   | 1 +
 target/arm/cpu64.c | 1 +
 2 files changed, 2 insertions(+)

diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -XXX,XX +XXX,XX @@ struct ArchCPU {
 
     /* Used to set the maximum vector length the cpu will support.  */
     uint32_t sve_max_vq;
+    uint32_t sme_max_vq;
 
 #ifdef CONFIG_USER_ONLY
     /* Used to set the default vector length at process start. */
diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu64.c
+++ b/target/arm/cpu64.c
@@ -XXX,XX +XXX,XX @@ void arm_cpu_sme_finalize(ARMCPU *cpu, Error **errp)
     }
 
     cpu->sme_vq.map = vq_map;
+    cpu->sme_max_vq = 32 - clz32(vq_map);
 }
 
 static bool cpu_arm_get_sme(Object *obj, Error **errp)
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-26-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/helper-sme.h    |  9 +++++
 target/arm/tcg/translate.h     |  1 +
 target/arm/tcg/sme.decode      | 37 ++++++++++++++++++
 target/arm/tcg/sme_helper.c    | 64 ++++++++++++++++++++++++++++++
 target/arm/tcg/translate-a64.c |  1 +
 target/arm/tcg/translate-sme.c | 71 ++++++++++++++++++++++++++++++++++
 6 files changed, 183 insertions(+)

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-27-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/translate.h     |  5 +++++
 target/arm/tcg/sme.decode      | 12 ++++++++++++
 target/arm/tcg/translate-sme.c | 30 ++++++++++++++++++++++++++++++
 3 files changed, 47 insertions(+)

diff --git a/target/arm/tcg/translate.h b/target/arm/tcg/translate.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate.h
+++ b/target/arm/tcg/translate.h
@@ -XXX,XX +XXX,XX @@ static inline int plus_2(DisasContext *s, int x)
     return x + 2;
 }
 
+static inline int plus_8(DisasContext *s, int x)
+{
+    return x + 8;
+}
+
 static inline int plus_12(DisasContext *s, int x)
 {
     return x + 12;
diff --git a/target/arm/tcg/sme.decode b/target/arm/tcg/sme.decode
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/sme.decode
+++ b/target/arm/tcg/sme.decode
@@ -XXX,XX +XXX,XX @@ ZERO_zt0        11000000 01 001 00000000000 00000001
 ### SME Move into/from Array
 
 %mova_rs        13:2 !function=plus_12
+%mova_rv        13:2 !function=plus_8
+&mova_a         rv zr off
 &mova_p         esz rs pg zr za off v:bool
 &mova_t         esz rs zr za off v:bool
 
@@ -XXX,XX +XXX,XX @@ MOVA_zt4        11000000 10 00011 0 v:1 .. 001 000 za:2       zr:3 00 \
 MOVA_zt4        11000000 11 00011 0 v:1 .. 001 00 za:3        zr:3 00 \
                 &mova_t rs=%mova_rs esz=3 off=0
 
+MOVA_az2        11000000 00 00010 00 .. 010 zr:4  000 off:3  \
+                &mova_a rv=%mova_rv
+MOVA_az4        11000000 00 00010 00 .. 011 zr:3 0000 off:3  \
+                &mova_a rv=%mova_rv
+
+MOVA_za2        11000000 00 00011 00 .. 010 00 off:3 zr:4 0  \
+                &mova_a rv=%mova_rv
+MOVA_za4        11000000 00 00011 00 .. 011 00 off:3 zr:3 00 \
+                &mova_a rv=%mova_rv
+
 ### SME Move into/from ZT0
 
 MOVT_rzt        1100 0000 0100 1100 0 off:3 00 11111 rt:5
diff --git a/target/arm/tcg/translate-sme.c b/target/arm/tcg/translate-sme.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-sme.c
+++ b/target/arm/tcg/translate-sme.c
@@ -XXX,XX +XXX,XX @@ TRANS_FEAT(MOVA_tz4, aa64_sme2, do_mova_tile_n, a, 4, false)
 TRANS_FEAT(MOVA_zt2, aa64_sme2, do_mova_tile_n, a, 2, true)
 TRANS_FEAT(MOVA_zt4, aa64_sme2, do_mova_tile_n, a, 4, true)
 
+static bool do_mova_array_n(DisasContext *s, arg_mova_a *a, int n, bool to_vec)
+{
+    TCGv_ptr t_za;
+    int svl;
+
+    if (!sme_smza_enabled_check(s)) {
+        return true;
+    }
+
+    svl = streaming_vec_reg_size(s);
+    t_za = get_zarray(s, a->rv, a->off, n, 0);
+
+    for (int i = 0; i < n; ++i) {
+        int o_za = (svl / n * sizeof(ARMVectorReg)) * i;
+        int o_zr = vec_full_reg_offset(s, a->zr * n + i);
+
+        if (to_vec) {
+            tcg_gen_gvec_mov_var(MO_8, tcg_env, o_zr, t_za, o_za, svl, svl);
+        } else {
+            tcg_gen_gvec_mov_var(MO_8, t_za, o_za, tcg_env, o_zr, svl, svl);
+        }
+    }
+    return true;
+}
+
+TRANS_FEAT(MOVA_az2, aa64_sme2, do_mova_array_n, a, 2, false)
+TRANS_FEAT(MOVA_az4, aa64_sme2, do_mova_array_n, a, 4, false)
+TRANS_FEAT(MOVA_za2, aa64_sme2, do_mova_array_n, a, 2, true)
+TRANS_FEAT(MOVA_za4, aa64_sme2, do_mova_array_n, a, 4, true)
+
 static bool do_movt(DisasContext *s, arg_MOVT_rzt *a,
                     void (*func)(TCGv_i64, TCGv_ptr, tcg_target_long))
 {
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-28-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/helper-sme.h    |  3 +++
 target/arm/tcg/sme.decode      |  2 ++
 target/arm/tcg/sme_helper.c    | 34 ++++++++++++++++++++++++----------
 target/arm/tcg/translate-sme.c |  2 ++
 4 files changed, 31 insertions(+), 10 deletions(-)

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-29-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/helper-sme.h    |  4 ++++
 target/arm/tcg/sme.decode      |  2 ++
 target/arm/tcg/sme_helper.c    | 37 +++++++++++++++++++++++++---------
 target/arm/tcg/translate-sme.c |  2 ++
 4 files changed, 35 insertions(+), 10 deletions(-)

From: Richard Henderson <richard.henderson@linaro.org>

To be used by both SVE2 and SME2.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-30-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/translate-a64.h |  4 ++++
 target/arm/tcg/gengvec64.c     | 11 +++++++++++
 target/arm/tcg/translate-sve.c |  8 +-------
 3 files changed, 16 insertions(+), 7 deletions(-)

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-31-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/helper-sme.h    |  13 ++++
 target/arm/tcg/helper.h        |   8 ++
 target/arm/tcg/vec_internal.h  |   4 +
 target/arm/tcg/sme.decode      |  40 ++++++++++
 target/arm/tcg/helper-a64.c    |   2 +
 target/arm/tcg/neon_helper.c   |  30 ++++++++
 target/arm/tcg/translate-sme.c | 137 +++++++++++++++++++++++++++++++++
 target/arm/tcg/vec_helper.c    |   7 ++
 8 files changed, 241 insertions(+)

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-32-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/sme.decode      | 36 +++++++++++++++++++
 target/arm/tcg/translate-sme.c | 65 ++++++++++++++++++++++++++++++++++
 2 files changed, 101 insertions(+)

diff --git a/target/arm/tcg/sme.decode b/target/arm/tcg/sme.decode
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/sme.decode
+++ b/target/arm/tcg/sme.decode
@@ -XXX,XX +XXX,XX @@ ADD_n1         1100000 1 .. 10 .... 1010.0 11000 .... 0    @z2z_4x1
 
 SQDMULH_n1     1100000 1 .. 10 .... 1010.1 00000 .... 0    @z2z_2x1
 SQDMULH_n1     1100000 1 .. 10 .... 1010.1 00000 .... 0    @z2z_4x1
+
+### SME2 Multi-vector Multiple Vectors SVE Destructive
+
+%zm_ax2         17:4 !function=times_2
+%zm_ax4         18:3 !function=times_4
+
+@z2z_2x2        ....... . esz:2 . ....0 ....0. ..... .... . \
+                &z2z_en n=2 zdn=%zd_ax2 zm=%zm_ax2
+@z2z_4x4        ....... . esz:2 . ...00 ....1. ..... ...0 . \
+                &z2z_en n=4 zdn=%zd_ax4 zm=%zm_ax4
+
+SMAX_nn        1100000 1 .. 1 ..... 1011.0 00000 .... 0    @z2z_2x2
+SMAX_nn        1100000 1 .. 1 ..... 1011.0 00000 .... 0    @z2z_4x4
+UMAX_nn        1100000 1 .. 1 ..... 1011.0 00000 .... 1    @z2z_2x2
+UMAX_nn        1100000 1 .. 1 ..... 1011.0 00000 .... 1    @z2z_4x4
+SMIN_nn        1100000 1 .. 1 ..... 1011.0 00001 .... 0    @z2z_2x2
+SMIN_nn        1100000 1 .. 1 ..... 1011.0 00001 .... 0    @z2z_4x4
+UMIN_nn        1100000 1 .. 1 ..... 1011.0 00001 .... 1    @z2z_2x2
+UMIN_nn        1100000 1 .. 1 ..... 1011.0 00001 .... 1    @z2z_4x4
+
+FMAX_nn        1100000 1 .. 1 ..... 1011.0 01000 .... 0    @z2z_2x2
+FMAX_nn        1100000 1 .. 1 ..... 1011.0 01000 .... 0    @z2z_4x4
+FMIN_nn        1100000 1 .. 1 ..... 1011.0 01000 .... 1    @z2z_2x2
+FMIN_nn        1100000 1 .. 1 ..... 1011.0 01000 .... 1    @z2z_4x4
+FMAXNM_nn      1100000 1 .. 1 ..... 1011.0 01001 .... 0    @z2z_2x2
+FMAXNM_nn      1100000 1 .. 1 ..... 1011.0 01001 .... 0    @z2z_4x4
+FMINNM_nn      1100000 1 .. 1 ..... 1011.0 01001 .... 1    @z2z_2x2
+FMINNM_nn      1100000 1 .. 1 ..... 1011.0 01001 .... 1    @z2z_4x4
+
+SRSHL_nn       1100000 1 .. 1 ..... 1011.0 10001 .... 0    @z2z_2x2
+SRSHL_nn       1100000 1 .. 1 ..... 1011.0 10001 .... 0    @z2z_4x4
+URSHL_nn       1100000 1 .. 1 ..... 1011.0 10001 .... 1    @z2z_2x2
+URSHL_nn       1100000 1 .. 1 ..... 1011.0 10001 .... 1    @z2z_4x4
+
+SQDMULH_nn     1100000 1 .. 1 ..... 1011.1 00000 .... 0    @z2z_2x2
+SQDMULH_nn     1100000 1 .. 1 ..... 1011.1 00000 .... 0    @z2z_4x4
diff --git a/target/arm/tcg/translate-sme.c b/target/arm/tcg/translate-sme.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-sme.c
+++ b/target/arm/tcg/translate-sme.c
@@ -XXX,XX +XXX,XX @@ TRANS_FEAT(SRSHL_n1, aa64_sme2, do_z2z_n1, a, gen_sme2_srshl)
 TRANS_FEAT(URSHL_n1, aa64_sme2, do_z2z_n1, a, gen_sme2_urshl)
 TRANS_FEAT(SQDMULH_n1, aa64_sme2, do_z2z_n1, a, gen_gvec_sve2_sqdmulh)
 
+static bool do_z2z_nn(DisasContext *s, arg_z2z_en *a, GVecGen3Fn *fn)
+{
+    int esz, dn, dm, vsz, n;
+
+    if (!sme_sm_enabled_check(s)) {
+        return true;
+    }
+
+    esz = a->esz;
+    n = a->n;
+    dn = a->zdn;
+    dm = a->zm;
+    vsz = streaming_vec_reg_size(s);
+
+    for (int i = 0; i < n; i++) {
+        int dofs = vec_full_reg_offset(s, dn + i);
+        int mofs = vec_full_reg_offset(s, dm + i);
+
+        fn(esz, dofs, dofs, mofs, vsz, vsz);
+    }
+    return true;
+}
+
+TRANS_FEAT(SMAX_nn, aa64_sme2, do_z2z_nn, a, tcg_gen_gvec_smax)
+TRANS_FEAT(SMIN_nn, aa64_sme2, do_z2z_nn, a, tcg_gen_gvec_smin)
+TRANS_FEAT(UMAX_nn, aa64_sme2, do_z2z_nn, a, tcg_gen_gvec_umax)
+TRANS_FEAT(UMIN_nn, aa64_sme2, do_z2z_nn, a, tcg_gen_gvec_umin)
+TRANS_FEAT(SRSHL_nn, aa64_sme2, do_z2z_nn, a, gen_sme2_srshl)
+TRANS_FEAT(URSHL_nn, aa64_sme2, do_z2z_nn, a, gen_sme2_urshl)
+TRANS_FEAT(SQDMULH_nn, aa64_sme2, do_z2z_nn, a, gen_gvec_sve2_sqdmulh)
+
 static bool do_z2z_n1_fpst(DisasContext *s, arg_z2z_en *a,
                            gen_helper_gvec_3_ptr * const fns[4])
 {
@@ -XXX,XX +XXX,XX @@ static bool do_z2z_n1_fpst(DisasContext *s, arg_z2z_en *a,
     return true;
 }
 
+static bool do_z2z_nn_fpst(DisasContext *s, arg_z2z_en *a,
+                           gen_helper_gvec_3_ptr * const fns[4])
+{
+    int esz = a->esz, n, dn, dm, vsz;
+    gen_helper_gvec_3_ptr *fn;
+    TCGv_ptr fpst;
+
+    if (esz == MO_8 && !dc_isar_feature(aa64_sme_b16b16, s)) {
+        return false;
+    }
+    if (!sme_sm_enabled_check(s)) {
+        return true;
+    }
+
+    fpst = fpstatus_ptr(esz == MO_16 ? FPST_A64_F16 : FPST_A64);
+    fn = fns[esz];
+    n = a->n;
+    dn = a->zdn;
+    dm = a->zm;
+    vsz = streaming_vec_reg_size(s);
+
+    for (int i = 0; i < n; i++) {
+        int dofs = vec_full_reg_offset(s, dn + i);
+        int mofs = vec_full_reg_offset(s, dm + i);
+
+        tcg_gen_gvec_3_ptr(dofs, dofs, mofs, fpst, vsz, vsz, 0, fn);
+    }
+    return true;
+}
+
 static gen_helper_gvec_3_ptr * const f_vector_fmax[2][4] = {
     { gen_helper_gvec_fmax_b16,
       gen_helper_gvec_fmax_h,
@@ -XXX,XX +XXX,XX @@ static gen_helper_gvec_3_ptr * const f_vector_fmax[2][4] = {
       gen_helper_gvec_ah_fmax_d },
 };
 TRANS_FEAT(FMAX_n1, aa64_sme2, do_z2z_n1_fpst, a, f_vector_fmax[s->fpcr_ah])
+TRANS_FEAT(FMAX_nn, aa64_sme2, do_z2z_nn_fpst, a, f_vector_fmax[s->fpcr_ah])
 
 static gen_helper_gvec_3_ptr * const f_vector_fmin[2][4] = {
     { gen_helper_gvec_fmin_b16,
@@ -XXX,XX +XXX,XX @@ static gen_helper_gvec_3_ptr * const f_vector_fmin[2][4] = {
       gen_helper_gvec_ah_fmin_d },
 };
 TRANS_FEAT(FMIN_n1, aa64_sme2, do_z2z_n1_fpst, a, f_vector_fmin[s->fpcr_ah])
+TRANS_FEAT(FMIN_nn, aa64_sme2, do_z2z_nn_fpst, a, f_vector_fmin[s->fpcr_ah])
 
 static gen_helper_gvec_3_ptr * const f_vector_fmaxnm[4] = {
     gen_helper_gvec_fmaxnum_b16,
@@ -XXX,XX +XXX,XX @@ static gen_helper_gvec_3_ptr * const f_vector_fmaxnm[4] = {
     gen_helper_gvec_fmaxnum_d,
 };
 TRANS_FEAT(FMAXNM_n1, aa64_sme2, do_z2z_n1_fpst, a, f_vector_fmaxnm)
+TRANS_FEAT(FMAXNM_nn, aa64_sme2, do_z2z_nn_fpst, a, f_vector_fmaxnm)
 
 static gen_helper_gvec_3_ptr * const f_vector_fminnm[4] = {
     gen_helper_gvec_fminnum_b16,
@@ -XXX,XX +XXX,XX @@ static gen_helper_gvec_3_ptr * const f_vector_fminnm[4] = {
     gen_helper_gvec_fminnum_d,
 };
 TRANS_FEAT(FMINNM_n1, aa64_sme2, do_z2z_n1_fpst, a, f_vector_fminnm)
+TRANS_FEAT(FMINNM_nn, aa64_sme2, do_z2z_nn_fpst, a, f_vector_fminnm)
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-33-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/translate.h     |  2 ++
 target/arm/tcg/sme.decode      | 15 +++++++++++++++
 target/arm/tcg/translate-sme.c | 30 ++++++++++++++++++++++++++++++
 3 files changed, 47 insertions(+)

diff --git a/target/arm/tcg/translate.h b/target/arm/tcg/translate.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate.h
+++ b/target/arm/tcg/translate.h
@@ -XXX,XX +XXX,XX @@ typedef void GVecGen3Fn(unsigned, uint32_t, uint32_t,
                         uint32_t, uint32_t, uint32_t);
 typedef void GVecGen4Fn(unsigned, uint32_t, uint32_t, uint32_t,
                         uint32_t, uint32_t, uint32_t);
+typedef void GVecGen3FnVar(unsigned, TCGv_ptr, uint32_t, TCGv_ptr, uint32_t,
+                           TCGv_ptr, uint32_t, uint32_t, uint32_t);
 
 /* Function prototype for gen_ functions for calling Neon helpers */
 typedef void NeonGenOneOpFn(TCGv_i32, TCGv_i32);
diff --git a/target/arm/tcg/sme.decode b/target/arm/tcg/sme.decode
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/sme.decode
+++ b/target/arm/tcg/sme.decode
@@ -XXX,XX +XXX,XX @@ URSHL_nn       1100000 1 .. 1 ..... 1011.0 10001 .... 1    @z2z_4x4
 
 SQDMULH_nn     1100000 1 .. 1 ..... 1011.1 00000 .... 0    @z2z_2x2
 SQDMULH_nn     1100000 1 .. 1 ..... 1011.1 00000 .... 0    @z2z_4x4
+
+### SME2 Multi-vector Multiple and Single Array Vectors
+
+&azz_n          n off rv zn zm
+@azz_nx1_o3     ........ .... zm:4 ...... zn:5 .. off:3     &azz_n rv=%mova_rv
+
+ADD_azz_n1_s    11000001 0010 .... 0 .. 110 ..... 10 ...    @azz_nx1_o3 n=2
+ADD_azz_n1_s    11000001 0011 .... 0 .. 110 ..... 10 ...    @azz_nx1_o3 n=4
+ADD_azz_n1_d    11000001 0110 .... 0 .. 110 ..... 10 ...    @azz_nx1_o3 n=2
+ADD_azz_n1_d    11000001 0111 .... 0 .. 110 ..... 10 ...    @azz_nx1_o3 n=4
+
+SUB_azz_n1_s    11000001 0010 .... 0 .. 110 ..... 11 ...    @azz_nx1_o3 n=2
+SUB_azz_n1_s    11000001 0011 .... 0 .. 110 ..... 11 ...    @azz_nx1_o3 n=4
+SUB_azz_n1_d    11000001 0110 .... 0 .. 110 ..... 11 ...    @azz_nx1_o3 n=2
+SUB_azz_n1_d    11000001 0111 .... 0 .. 110 ..... 11 ...    @azz_nx1_o3 n=4
diff --git a/target/arm/tcg/translate-sme.c b/target/arm/tcg/translate-sme.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-sme.c
+++ b/target/arm/tcg/translate-sme.c
@@ -XXX,XX +XXX,XX @@ static gen_helper_gvec_3_ptr * const f_vector_fminnm[4] = {
 };
 TRANS_FEAT(FMINNM_n1, aa64_sme2, do_z2z_n1_fpst, a, f_vector_fminnm)
 TRANS_FEAT(FMINNM_nn, aa64_sme2, do_z2z_nn_fpst, a, f_vector_fminnm)
+
+/* Add/Sub vector Z[m] to each Z[n*N] with result in ZA[d*N]. */
+static bool do_azz_n1(DisasContext *s, arg_azz_n *a, int esz,
+                      GVecGen3FnVar *fn)
+{
+    TCGv_ptr t_za;
+    int svl, n, o_zm;
+
+    if (!sme_smza_enabled_check(s)) {
+        return true;
+    }
+
+    n = a->n;
+    t_za = get_zarray(s, a->rv, a->off, n, 0);
+    o_zm = vec_full_reg_offset(s, a->zm);
+    svl = streaming_vec_reg_size(s);
+
+    for (int i = 0; i < n; ++i) {
+        int o_za = (svl / n * sizeof(ARMVectorReg)) * i;
+        int o_zn = vec_full_reg_offset(s, (a->zn + i) % 32);
+
+        fn(esz, t_za, o_za, tcg_env, o_zn, tcg_env, o_zm, svl, svl);
+    }
+    return true;
+}
+
+TRANS_FEAT(ADD_azz_n1_s, aa64_sme2, do_azz_n1, a, MO_32, tcg_gen_gvec_add_var)
+TRANS_FEAT(SUB_azz_n1_s, aa64_sme2, do_azz_n1, a, MO_32, tcg_gen_gvec_sub_var)
+TRANS_FEAT(ADD_azz_n1_d, aa64_sme2_i16i64, do_azz_n1, a, MO_64, tcg_gen_gvec_add_var)
+TRANS_FEAT(SUB_azz_n1_d, aa64_sme2_i16i64, do_azz_n1, a, MO_64, tcg_gen_gvec_sub_var)
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-34-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/sme.decode      | 20 ++++++++++++++++++++
 target/arm/tcg/translate-sme.c | 30 ++++++++++++++++++++++++++++++
 2 files changed, 50 insertions(+)

From: Richard Henderson <richard.henderson@linaro.org>

Indicate whether to use FPST_FPCR or FPST_ZA via bit 2 of
simd_data(desc).  For SVE, this bit remains zero.
For do_FMLAL_zzzw, this requires no change.
For do_FMLAL_zzxw, move the index up one bit.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-35-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/translate-sve.c | 2 +-
 target/arm/tcg/vec_helper.c    | 8 +++++---
 2 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/target/arm/tcg/translate-sve.c b/target/arm/tcg/translate-sve.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-sve.c
+++ b/target/arm/tcg/translate-sve.c
@@ -XXX,XX +XXX,XX @@ static bool do_FMLAL_zzxw(DisasContext *s, arg_rrxr_esz *a, bool sub, bool sel)
 {
     return gen_gvec_ptr_zzzz(s, gen_helper_sve2_fmlal_zzxw_s,
                              a->rd, a->rn, a->rm, a->ra,
-                             (a->index << 2) | (sel << 1) | sub, tcg_env);
+                             (a->index << 3) | (sel << 1) | sub, tcg_env);
 }
 
 TRANS_FEAT(FMLALB_zzxw, aa64_sve2, do_FMLAL_zzxw, a, false, false)
diff --git a/target/arm/tcg/vec_helper.c b/target/arm/tcg/vec_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/vec_helper.c
+++ b/target/arm/tcg/vec_helper.c
@@ -XXX,XX +XXX,XX @@ void HELPER(sve2_fmlal_zzzw_s)(void *vd, void *vn, void *vm, void *va,
     intptr_t i, oprsz = simd_oprsz(desc);
     bool is_s = extract32(desc, SIMD_DATA_SHIFT, 1);
     intptr_t sel = extract32(desc, SIMD_DATA_SHIFT + 1, 1) * sizeof(float16);
-    float_status *status = &env->vfp.fp_status[FPST_A64];
+    bool za = extract32(desc, SIMD_DATA_SHIFT + 2, 1);
+    float_status *status = &env->vfp.fp_status[za ? FPST_ZA : FPST_A64];
     bool fz16 = env->vfp.fpcr & FPCR_FZ16;
     int negx = 0, negf = 0;
 
@@ -XXX,XX +XXX,XX @@ void HELPER(sve2_fmlal_zzxw_s)(void *vd, void *vn, void *vm, void *va,
     intptr_t i, j, oprsz = simd_oprsz(desc);
     bool is_s = extract32(desc, SIMD_DATA_SHIFT, 1);
     intptr_t sel = extract32(desc, SIMD_DATA_SHIFT + 1, 1) * sizeof(float16);
-    intptr_t idx = extract32(desc, SIMD_DATA_SHIFT + 2, 3) * sizeof(float16);
-    float_status *status = &env->vfp.fp_status[FPST_A64];
+    bool za = extract32(desc, SIMD_DATA_SHIFT + 2, 1);
+    intptr_t idx = extract32(desc, SIMD_DATA_SHIFT + 3, 3) * sizeof(float16);
+    float_status *status = &env->vfp.fp_status[za ? FPST_ZA : FPST_A64];
     bool fz16 = env->vfp.fpcr & FPCR_FZ16;
     int negx = 0, negf = 0;
 
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-36-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/helper.h     |  8 +++++
 target/arm/tcg/vec_helper.c | 58 ++++++++++++++++++++++++++++---------
 2 files changed, 53 insertions(+), 13 deletions(-)

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-37-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/sme.decode      | 71 ++++++++++++++++++++++++
 target/arm/tcg/translate-sme.c | 98 ++++++++++++++++++++++++++++++++++
 2 files changed, 169 insertions(+)

diff --git a/target/arm/tcg/sme.decode b/target/arm/tcg/sme.decode
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/sme.decode
+++ b/target/arm/tcg/sme.decode
@@ -XXX,XX +XXX,XX @@ SUB_azz_n1_s    11000001 0011 .... 0 .. 110 ..... 11 ...    @azz_nx1_o3 n=4
 SUB_azz_n1_d    11000001 0110 .... 0 .. 110 ..... 11 ...    @azz_nx1_o3 n=2
 SUB_azz_n1_d    11000001 0111 .... 0 .. 110 ..... 11 ...    @azz_nx1_o3 n=4
 
+%off3_x2        0:3 !function=times_2
+%off2_x2        0:2 !function=times_2
+
+@azz_nx1_o3x2   ........ ... . zm:4 . .. ... zn:5 .. ...    \
+                &azz_n off=%off3_x2 rv=%mova_rv
+@azz_nx1_o2x2   ........ ... . zm:4 . .. ... zn:5 ... ..    \
+                &azz_n off=%off2_x2 rv=%mova_rv
+
+FMLAL_n1        11000001 001 0 .... 0 .. 011 ..... 00 ...   @azz_nx1_o3x2 n=1
+FMLAL_n1        11000001 001 0 .... 0 .. 010 ..... 000 ..   @azz_nx1_o2x2 n=2
+FMLAL_n1        11000001 001 1 .... 0 .. 010 ..... 000 ..   @azz_nx1_o2x2 n=4
+
+FMLSL_n1        11000001 001 0 .... 0 .. 011 ..... 01 ...   @azz_nx1_o3x2 n=1
+FMLSL_n1        11000001 001 0 .... 0 .. 010 ..... 010 ..   @azz_nx1_o2x2 n=2
+FMLSL_n1        11000001 001 1 .... 0 .. 010 ..... 010 ..   @azz_nx1_o2x2 n=4
+
+BFMLAL_n1       11000001 001 0 .... 0 .. 011 ..... 10 ...   @azz_nx1_o3x2 n=1
+BFMLAL_n1       11000001 001 0 .... 0 .. 010 ..... 100 ..   @azz_nx1_o2x2 n=2
+BFMLAL_n1       11000001 001 1 .... 0 .. 010 ..... 100 ..   @azz_nx1_o2x2 n=4
+
+BFMLSL_n1       11000001 001 0 .... 0 .. 011 ..... 11 ...   @azz_nx1_o3x2 n=1
+BFMLSL_n1       11000001 001 0 .... 0 .. 010 ..... 110 ..   @azz_nx1_o2x2 n=2
+BFMLSL_n1       11000001 001 1 .... 0 .. 010 ..... 110 ..   @azz_nx1_o2x2 n=4
+
 ### SME2 Multi-vector Multiple Array Vectors
 
 %zn_ax2         6:4 !function=times_2
@@ -XXX,XX +XXX,XX @@ SUB_azz_nn_s    11000001 101 ....0 0 .. 110 ....0 11 ...    @azz_2x2_o3
 SUB_azz_nn_s    11000001 101 ...01 0 .. 110 ...00 11 ...    @azz_4x4_o3
 SUB_azz_nn_d    11000001 111 ....0 0 .. 110 ....0 11 ...    @azz_2x2_o3
 SUB_azz_nn_d    11000001 111 ...01 0 .. 110 ...00 11 ...    @azz_4x4_o3
+
+@azz_2x2_o2x2   ........ ... ..... . .. ... ..... ... ..    \
+                &azz_n n=2 rv=%mova_rv zn=%zn_ax2 zm=%zm_ax2 off=%off2_x2
+@azz_4x4_o2x2   ........ ... ..... . .. ... ..... ... ..    \
+                &azz_n n=4 rv=%mova_rv zn=%zn_ax4 zm=%zm_ax4 off=%off2_x2
+
+FMLAL_nn        11000001 101 ....0 0 .. 010 ....0 000 ..    @azz_2x2_o2x2
+FMLAL_nn        11000001 101 ...01 0 .. 010 ...00 000 ..    @azz_4x4_o2x2
+
+FMLSL_nn        11000001 101 ....0 0 .. 010 ....0 010 ..    @azz_2x2_o2x2
+FMLSL_nn        11000001 101 ...01 0 .. 010 ...00 010 ..    @azz_4x4_o2x2
+
+BFMLAL_nn       11000001 101 ....0 0 .. 010 ....0 100 ..    @azz_2x2_o2x2
+BFMLAL_nn       11000001 101 ...01 0 .. 010 ...00 100 ..    @azz_4x4_o2x2
+
+BFMLSL_nn       11000001 101 ....0 0 .. 010 ....0 110 ..    @azz_2x2_o2x2
+BFMLSL_nn       11000001 101 ...01 0 .. 010 ...00 110 ..    @azz_4x4_o2x2
+
+### SME2 Multi-vector Indexed
+
+&azx_n          n off rv zn zm idx
+
+%idx3_15_10     15:1 10:2
+%idx2_10_2      10:2 2:1
+
+@azx_1x1_o3x2   ........ .... zm:4 . .. . .. zn:5 .. ...    \
+                &azx_n n=1 rv=%mova_rv off=%off3_x2 idx=%idx3_15_10
+@azx_2x1_o2x2   ........ .... zm:4 . .. . .. ..... .. ...   \
+                &azx_n n=2 rv=%mova_rv off=%off2_x2 zn=%zn_ax2 idx=%idx2_10_2
+@azx_4x1_o2x2   ........ .... zm:4 . .. . .. ..... .. ...   \
+                &azx_n n=4 rv=%mova_rv off=%off2_x2 zn=%zn_ax4 idx=%idx2_10_2
+
+FMLAL_nx        11000001 1000 .... . .. 1 .. ..... 00 ...   @azx_1x1_o3x2
+FMLAL_nx        11000001 1001 .... 0 .. 1 .. ....0 00 ...   @azx_2x1_o2x2
+FMLAL_nx        11000001 1001 .... 1 .. 1 .. ...00 00 ...   @azx_4x1_o2x2
+
+FMLSL_nx        11000001 1000 .... . .. 1 .. ..... 01 ...   @azx_1x1_o3x2
+FMLSL_nx        11000001 1001 .... 0 .. 1 .. ....0 01 ...   @azx_2x1_o2x2
+FMLSL_nx        11000001 1001 .... 1 .. 1 .. ...00 01 ...   @azx_4x1_o2x2
+
+BFMLAL_nx       11000001 1000 .... . .. 1 .. ..... 10 ...   @azx_1x1_o3x2
+BFMLAL_nx       11000001 1001 .... 0 .. 1 .. ....0 10 ...   @azx_2x1_o2x2
+BFMLAL_nx       11000001 1001 .... 1 .. 1 .. ...00 10 ...   @azx_4x1_o2x2
+
+BFMLSL_nx       11000001 1000 .... . .. 1 .. ..... 11 ...   @azx_1x1_o3x2
+BFMLSL_nx       11000001 1001 .... 0 .. 1 .. ....0 11 ...   @azx_2x1_o2x2
+BFMLSL_nx       11000001 1001 .... 1 .. 1 .. ...00 11 ...   @azx_4x1_o2x2
diff --git a/target/arm/tcg/translate-sme.c b/target/arm/tcg/translate-sme.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-sme.c
+++ b/target/arm/tcg/translate-sme.c
@@ -XXX,XX +XXX,XX @@ TRANS_FEAT(ADD_azz_nn_s, aa64_sme2, do_azz_nn, a, MO_32, tcg_gen_gvec_add_var)
 TRANS_FEAT(SUB_azz_nn_s, aa64_sme2, do_azz_nn, a, MO_32, tcg_gen_gvec_sub_var)
 TRANS_FEAT(ADD_azz_nn_d, aa64_sme2_i16i64, do_azz_nn, a, MO_64, tcg_gen_gvec_add_var)
 TRANS_FEAT(SUB_azz_nn_d, aa64_sme2_i16i64, do_azz_nn, a, MO_64, tcg_gen_gvec_sub_var)
+
+/*
+ * Expand array multi-vector single (n1), array multi-vector (nn),
+ * and array multi-vector indexed (nx), for floating-point accumulate.
+ *   multi: true for nn, false for n1.
+ *   fpst: >= 0 to set ptr argument for FPST_*, < 0 for ENV.
+ *   data: stuff for simd_data, including any index.
+ */
+#define FPST_ENV  -1
+
+static bool do_azz_acc_fp(DisasContext *s, int nreg, int nsel,
+                          int rv, int off, int zn, int zm,
+                          int data, int shsel, bool multi, int fpst,
+                          gen_helper_gvec_4_ptr *fn)
+{
+    if (sme_smza_enabled_check(s)) {
+        int svl = streaming_vec_reg_size(s);
+        int vstride = svl / nreg;
+        TCGv_ptr t_za = get_zarray(s, rv, off, nreg, nsel);
+        TCGv_ptr t, ptr;
+
+        if (fpst >= 0) {
+            ptr = fpstatus_ptr(fpst);
+        } else {
+            ptr = tcg_env;
+        }
+        t = tcg_temp_new_ptr();
+
+        for (int r = 0; r < nreg; ++r) {
+            TCGv_ptr t_zn = vec_full_reg_ptr(s, zn);
+            TCGv_ptr t_zm = vec_full_reg_ptr(s, zm);
+
+            for (int i = 0; i < nsel; ++i) {
+                int o_za = (r * vstride + i) * sizeof(ARMVectorReg);
+                int desc = simd_desc(svl, svl, data | (i << shsel));
+
+                tcg_gen_addi_ptr(t, t_za, o_za);
+                fn(t, t_zn, t_zm, t, ptr, tcg_constant_i32(desc));
+            }
+
+            /*
+             * For multiple-and-single vectors, Zn may wrap.
+             * For multiple vectors, both Zn and Zm are aligned.
+             */
+            zn = (zn + 1) % 32;
+            zm += multi;
+        }
+    }
+    return true;
+}
+
+static bool do_fmlal(DisasContext *s, arg_azz_n *a, bool sub, bool multi)
+{
+    return do_azz_acc_fp(s, a->n, 2, a->rv, a->off, a->zn, a->zm,
+                         (1 << 2) | sub, 1,
+                         multi, FPST_ENV, gen_helper_sve2_fmlal_zzzw_s);
+}
+
+TRANS_FEAT(FMLAL_n1, aa64_sme2, do_fmlal, a, false, false)
+TRANS_FEAT(FMLSL_n1, aa64_sme2, do_fmlal, a, true, false)
+TRANS_FEAT(FMLAL_nn, aa64_sme2, do_fmlal, a, false, true)
+TRANS_FEAT(FMLSL_nn, aa64_sme2, do_fmlal, a, true, true)
+
+static bool do_fmlal_nx(DisasContext *s, arg_azx_n *a, bool sub)
+{
+    return do_azz_acc_fp(s, a->n, 2, a->rv, a->off, a->zn, a->zm,
+                         (a->idx << 3) | (1 << 2) | sub, 1,
+                         false, FPST_ENV, gen_helper_sve2_fmlal_zzxw_s);
+}
+
+TRANS_FEAT(FMLAL_nx, aa64_sme2, do_fmlal_nx, a, false)
+TRANS_FEAT(FMLSL_nx, aa64_sme2, do_fmlal_nx, a, true)
+
+static bool do_bfmlal(DisasContext *s, arg_azz_n *a, bool sub, bool multi)
+{
+    return do_azz_acc_fp(s, a->n, 2, a->rv, a->off, a->zn, a->zm,
+                         0, 0, multi, FPST_ZA,
+                         (!sub ? gen_helper_gvec_bfmlal
+                          : s->fpcr_ah ? gen_helper_gvec_ah_bfmlsl
+                          : gen_helper_gvec_bfmlsl));
+}
+
+TRANS_FEAT(BFMLAL_n1, aa64_sme2, do_bfmlal, a, false, false)
+TRANS_FEAT(BFMLSL_n1, aa64_sme2, do_bfmlal, a, true, false)
+TRANS_FEAT(BFMLAL_nn, aa64_sme2, do_bfmlal, a, false, true)
+TRANS_FEAT(BFMLSL_nn, aa64_sme2, do_bfmlal, a, true, true)
+
+static bool do_bfmlal_nx(DisasContext *s, arg_azx_n *a, bool sub)
+{
+    return do_azz_acc_fp(s, a->n, 2, a->rv, a->off, a->zn, a->zm,
+                         a->idx << 1, 0, false, FPST_ZA,
+                         !sub ? gen_helper_gvec_bfmlal_idx
+                         : s->fpcr_ah ? gen_helper_gvec_ah_bfmlsl_idx
+                         : gen_helper_gvec_bfmlsl_idx);
+}
+
+TRANS_FEAT(BFMLAL_nx, aa64_sme2, do_bfmlal_nx, a, false)
+TRANS_FEAT(BFMLSL_nx, aa64_sme2, do_bfmlal_nx, a, true)
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-38-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/helper-sme.h    |  5 ++++
 target/arm/tcg/sme.decode      | 14 +++++++++++
 target/arm/tcg/sve.decode      |  7 ++++--
 target/arm/tcg/sme_helper.c    | 44 ++++++++++++++++++++++++++++++++++
 target/arm/tcg/translate-sme.c | 18 ++++++++++++++
 target/arm/tcg/translate-sve.c |  5 ++++
 6 files changed, 91 insertions(+), 2 deletions(-)

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-39-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/sme.decode      |  9 +++++++++
 target/arm/tcg/translate-sme.c | 17 +++++++++++++++++
 2 files changed, 26 insertions(+)

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-40-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/helper-sme.h    |  2 ++
 target/arm/tcg/helper.h        |  2 ++
 target/arm/tcg/sme.decode      |  3 +++
 target/arm/tcg/sme_helper.c    | 30 ++++++++++++++++++++++++++
 target/arm/tcg/translate-sme.c | 24 +++++++++++++++++++++
 target/arm/tcg/vec_helper.c    | 39 ++++++++++++++++++++++++++++++++++
 6 files changed, 100 insertions(+)

From: Richard Henderson <richard.henderson@linaro.org>

Emphasize that these are 4-way dot products.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-41-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/helper.h         | 22 +++++++++++-----------
 target/arm/tcg/translate-a64.c  | 14 +++++++-------
 target/arm/tcg/translate-neon.c | 14 +++++++-------
 target/arm/tcg/translate-sve.c  | 18 +++++++++---------
 target/arm/tcg/vec_helper.c     | 22 +++++++++++-----------
 5 files changed, 45 insertions(+), 45 deletions(-)

diff --git a/target/arm/tcg/helper.h b/target/arm/tcg/helper.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/helper.h
+++ b/target/arm/tcg/helper.h
@@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(sve2_sqrdmlah_d, TCG_CALL_NO_RWG,
 DEF_HELPER_FLAGS_5(sve2_sqrdmlsh_d, TCG_CALL_NO_RWG,
                    void, ptr, ptr, ptr, ptr, i32)
 
-DEF_HELPER_FLAGS_5(gvec_sdot_b, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32)
-DEF_HELPER_FLAGS_5(gvec_udot_b, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32)
-DEF_HELPER_FLAGS_5(gvec_sdot_h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32)
-DEF_HELPER_FLAGS_5(gvec_udot_h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32)
-DEF_HELPER_FLAGS_5(gvec_usdot_b, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32)
+DEF_HELPER_FLAGS_5(gvec_sdot_4b, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32)
+DEF_HELPER_FLAGS_5(gvec_udot_4b, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32)
+DEF_HELPER_FLAGS_5(gvec_sdot_4h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32)
+DEF_HELPER_FLAGS_5(gvec_udot_4h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32)
+DEF_HELPER_FLAGS_5(gvec_usdot_4b, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32)
 
-DEF_HELPER_FLAGS_5(gvec_sdot_idx_b, TCG_CALL_NO_RWG,
+DEF_HELPER_FLAGS_5(gvec_sdot_idx_4b, TCG_CALL_NO_RWG,
                    void, ptr, ptr, ptr, ptr, i32)
-DEF_HELPER_FLAGS_5(gvec_udot_idx_b, TCG_CALL_NO_RWG,
+DEF_HELPER_FLAGS_5(gvec_udot_idx_4b, TCG_CALL_NO_RWG,
                    void, ptr, ptr, ptr, ptr, i32)
-DEF_HELPER_FLAGS_5(gvec_sdot_idx_h, TCG_CALL_NO_RWG,
+DEF_HELPER_FLAGS_5(gvec_sdot_idx_4h, TCG_CALL_NO_RWG,
                    void, ptr, ptr, ptr, ptr, i32)
-DEF_HELPER_FLAGS_5(gvec_udot_idx_h, TCG_CALL_NO_RWG,
+DEF_HELPER_FLAGS_5(gvec_udot_idx_4h, TCG_CALL_NO_RWG,
                    void, ptr, ptr, ptr, ptr, i32)
-DEF_HELPER_FLAGS_5(gvec_sudot_idx_b, TCG_CALL_NO_RWG,
+DEF_HELPER_FLAGS_5(gvec_sudot_idx_4b, TCG_CALL_NO_RWG,
                    void, ptr, ptr, ptr, ptr, i32)
-DEF_HELPER_FLAGS_5(gvec_usdot_idx_b, TCG_CALL_NO_RWG,
+DEF_HELPER_FLAGS_5(gvec_usdot_idx_4b, TCG_CALL_NO_RWG,
                    void, ptr, ptr, ptr, ptr, i32)
 
 DEF_HELPER_FLAGS_5(gvec_fcaddh, TCG_CALL_NO_RWG,
diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-a64.c
+++ b/target/arm/tcg/translate-a64.c
@@ -XXX,XX +XXX,XX @@ static bool do_dot_vector_env(DisasContext *s, arg_qrrr_e *a,
     return true;
 }
 
-TRANS_FEAT(SDOT_v, aa64_dp, do_dot_vector, a, gen_helper_gvec_sdot_b)
-TRANS_FEAT(UDOT_v, aa64_dp, do_dot_vector, a, gen_helper_gvec_udot_b)
-TRANS_FEAT(USDOT_v, aa64_i8mm, do_dot_vector, a, gen_helper_gvec_usdot_b)
+TRANS_FEAT(SDOT_v, aa64_dp, do_dot_vector, a, gen_helper_gvec_sdot_4b)
+TRANS_FEAT(UDOT_v, aa64_dp, do_dot_vector, a, gen_helper_gvec_udot_4b)
+TRANS_FEAT(USDOT_v, aa64_i8mm, do_dot_vector, a, gen_helper_gvec_usdot_4b)
 TRANS_FEAT(BFDOT_v, aa64_bf16, do_dot_vector_env, a, gen_helper_gvec_bfdot)
 TRANS_FEAT(BFMMLA, aa64_bf16, do_dot_vector_env, a, gen_helper_gvec_bfmmla)
 TRANS_FEAT(SMMLA, aa64_i8mm, do_dot_vector, a, gen_helper_gvec_smmla_b)
@@ -XXX,XX +XXX,XX @@ static bool do_dot_vector_idx_env(DisasContext *s, arg_qrrx_e *a,
     return true;
 }
 
-TRANS_FEAT(SDOT_vi, aa64_dp, do_dot_vector_idx, a, gen_helper_gvec_sdot_idx_b)
-TRANS_FEAT(UDOT_vi, aa64_dp, do_dot_vector_idx, a, gen_helper_gvec_udot_idx_b)
+TRANS_FEAT(SDOT_vi, aa64_dp, do_dot_vector_idx, a, gen_helper_gvec_sdot_idx_4b)
+TRANS_FEAT(UDOT_vi, aa64_dp, do_dot_vector_idx, a, gen_helper_gvec_udot_idx_4b)
 TRANS_FEAT(SUDOT_vi, aa64_i8mm, do_dot_vector_idx, a,
-           gen_helper_gvec_sudot_idx_b)
+           gen_helper_gvec_sudot_idx_4b)
 TRANS_FEAT(USDOT_vi, aa64_i8mm, do_dot_vector_idx, a,
-           gen_helper_gvec_usdot_idx_b)
+           gen_helper_gvec_usdot_idx_4b)
 TRANS_FEAT(BFDOT_vi, aa64_bf16, do_dot_vector_idx_env, a,
            gen_helper_gvec_bfdot_idx)
 
diff --git a/target/arm/tcg/translate-neon.c b/target/arm/tcg/translate-neon.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-neon.c
+++ b/target/arm/tcg/translate-neon.c
@@ -XXX,XX +XXX,XX @@ static bool trans_VSDOT(DisasContext *s, arg_VSDOT *a)
         return false;
     }
     return do_neon_ddda(s, a->q * 7, a->vd, a->vn, a->vm, 0,
-                        gen_helper_gvec_sdot_b);
+                        gen_helper_gvec_sdot_4b);
 }
 
 static bool trans_VUDOT(DisasContext *s, arg_VUDOT *a)
@@ -XXX,XX +XXX,XX @@ static bool trans_VUDOT(DisasContext *s, arg_VUDOT *a)
         return false;
     }
     return do_neon_ddda(s, a->q * 7, a->vd, a->vn, a->vm, 0,
-                        gen_helper_gvec_udot_b);
+                        gen_helper_gvec_udot_4b);
 }
 
 static bool trans_VUSDOT(DisasContext *s, arg_VUSDOT *a)
@@ -XXX,XX +XXX,XX @@ static bool trans_VUSDOT(DisasContext *s, arg_VUSDOT *a)
         return false;
     }
     return do_neon_ddda(s, a->q * 7, a->vd, a->vn, a->vm, 0,
-                        gen_helper_gvec_usdot_b);
+                        gen_helper_gvec_usdot_4b);
 }
 
 static bool trans_VDOT_b16(DisasContext *s, arg_VDOT_b16 *a)
@@ -XXX,XX +XXX,XX @@ static bool trans_VSDOT_scalar(DisasContext *s, arg_VSDOT_scalar *a)
         return false;
     }
     return do_neon_ddda(s, a->q * 6, a->vd, a->vn, a->vm, a->index,
-                        gen_helper_gvec_sdot_idx_b);
+                        gen_helper_gvec_sdot_idx_4b);
 }
 
 static bool trans_VUDOT_scalar(DisasContext *s, arg_VUDOT_scalar *a)
@@ -XXX,XX +XXX,XX @@ static bool trans_VUDOT_scalar(DisasContext *s, arg_VUDOT_scalar *a)
         return false;
     }
     return do_neon_ddda(s, a->q * 6, a->vd, a->vn, a->vm, a->index,
-                        gen_helper_gvec_udot_idx_b);
+                        gen_helper_gvec_udot_idx_4b);
 }
 
 static bool trans_VUSDOT_scalar(DisasContext *s, arg_VUSDOT_scalar *a)
@@ -XXX,XX +XXX,XX @@ static bool trans_VUSDOT_scalar(DisasContext *s, arg_VUSDOT_scalar *a)
         return false;
     }
     return do_neon_ddda(s, a->q * 6, a->vd, a->vn, a->vm, a->index,
-                        gen_helper_gvec_usdot_idx_b);
+                        gen_helper_gvec_usdot_idx_4b);
 }
 
 static bool trans_VSUDOT_scalar(DisasContext *s, arg_VSUDOT_scalar *a)
@@ -XXX,XX +XXX,XX @@ static bool trans_VSUDOT_scalar(DisasContext *s, arg_VSUDOT_scalar *a)
         return false;
     }
     return do_neon_ddda(s, a->q * 6, a->vd, a->vn, a->vm, a->index,
-                        gen_helper_gvec_sudot_idx_b);
+                        gen_helper_gvec_sudot_idx_4b);
 }
 
 static bool trans_VDOT_b16_scal(DisasContext *s, arg_VDOT_b16_scal *a)
diff --git a/target/arm/tcg/translate-sve.c b/target/arm/tcg/translate-sve.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-sve.c
+++ b/target/arm/tcg/translate-sve.c
@@ -XXX,XX +XXX,XX @@ DO_ZZI(UMIN, umin)
 #undef DO_ZZI
 
 static gen_helper_gvec_4 * const dot_fns[2][2] = {
-    { gen_helper_gvec_sdot_b, gen_helper_gvec_sdot_h },
-    { gen_helper_gvec_udot_b, gen_helper_gvec_udot_h }
+    { gen_helper_gvec_sdot_4b, gen_helper_gvec_sdot_4h },
+    { gen_helper_gvec_udot_4b, gen_helper_gvec_udot_4h }
 };
 TRANS_FEAT(DOT_zzzz, aa64_sve, gen_gvec_ool_zzzz,
            dot_fns[a->u][a->sz], a->rd, a->rn, a->rm, a->ra, 0)
@@ -XXX,XX +XXX,XX @@ TRANS_FEAT(DOT_zzzz, aa64_sve, gen_gvec_ool_zzzz,
  */
 
 TRANS_FEAT(SDOT_zzxw_s, aa64_sve, gen_gvec_ool_arg_zzxz,
-           gen_helper_gvec_sdot_idx_b, a)
+           gen_helper_gvec_sdot_idx_4b, a)
 TRANS_FEAT(SDOT_zzxw_d, aa64_sve, gen_gvec_ool_arg_zzxz,
-           gen_helper_gvec_sdot_idx_h, a)
+           gen_helper_gvec_sdot_idx_4h, a)
 TRANS_FEAT(UDOT_zzxw_s, aa64_sve, gen_gvec_ool_arg_zzxz,
-           gen_helper_gvec_udot_idx_b, a)
+           gen_helper_gvec_udot_idx_4b, a)
 TRANS_FEAT(UDOT_zzxw_d, aa64_sve, gen_gvec_ool_arg_zzxz,
-           gen_helper_gvec_udot_idx_h, a)
+           gen_helper_gvec_udot_idx_4h, a)
 
 TRANS_FEAT(SUDOT_zzxw_s, aa64_sve_i8mm, gen_gvec_ool_arg_zzxz,
-           gen_helper_gvec_sudot_idx_b, a)
+           gen_helper_gvec_sudot_idx_4b, a)
 TRANS_FEAT(USDOT_zzxw_s, aa64_sve_i8mm, gen_gvec_ool_arg_zzxz,
-           gen_helper_gvec_usdot_idx_b, a)
+           gen_helper_gvec_usdot_idx_4b, a)
 
 #define DO_SVE2_RRX(NAME, FUNC) \
     TRANS_FEAT(NAME, aa64_sve, gen_gvec_ool_zzz, FUNC,          \
@@ -XXX,XX +XXX,XX @@ TRANS_FEAT(SQRDCMLAH_zzzz, aa64_sve2, gen_gvec_ool_zzzz,
            sqrdcmlah_fns[a->esz], a->rd, a->rn, a->rm, a->ra, a->rot)
 
 TRANS_FEAT(USDOT_zzzz, aa64_sve_i8mm, gen_gvec_ool_arg_zzzz,
-           a->esz == 2 ? gen_helper_gvec_usdot_b : NULL, a, 0)
+           a->esz == 2 ? gen_helper_gvec_usdot_4b : NULL, a, 0)
 
 TRANS_FEAT_NONSTREAMING(AESMC, aa64_sve2_aes, gen_gvec_ool_zz,
                         gen_helper_crypto_aesmc, a->rd, a->rd, 0)
diff --git a/target/arm/tcg/vec_helper.c b/target/arm/tcg/vec_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/vec_helper.c
+++ b/target/arm/tcg/vec_helper.c
@@ -XXX,XX +XXX,XX @@ void HELPER(NAME)(void *vd, void *vn, void *vm, void *va, uint32_t desc)  \
     clear_tail(d, opr_sz, simd_maxsz(desc));                              \
 }
 
-DO_DOT(gvec_sdot_b, int32_t, int8_t, int8_t)
-DO_DOT(gvec_udot_b, uint32_t, uint8_t, uint8_t)
-DO_DOT(gvec_usdot_b, uint32_t, uint8_t, int8_t)
-DO_DOT(gvec_sdot_h, int64_t, int16_t, int16_t)
-DO_DOT(gvec_udot_h, uint64_t, uint16_t, uint16_t)
+DO_DOT(gvec_sdot_4b, int32_t, int8_t, int8_t)
+DO_DOT(gvec_udot_4b, uint32_t, uint8_t, uint8_t)
+DO_DOT(gvec_usdot_4b, uint32_t, uint8_t, int8_t)
+DO_DOT(gvec_sdot_4h, int64_t, int16_t, int16_t)
+DO_DOT(gvec_udot_4h, uint64_t, uint16_t, uint16_t)
 
 #define DO_DOT_IDX(NAME, TYPED, TYPEN, TYPEM, HD) \
 void HELPER(NAME)(void *vd, void *vn, void *vm, void *va, uint32_t desc)  \
@@ -XXX,XX +XXX,XX @@ void HELPER(NAME)(void *vd, void *vn, void *vm, void *va, uint32_t desc)  \
     clear_tail(d, opr_sz, simd_maxsz(desc));                              \
 }
 
-DO_DOT_IDX(gvec_sdot_idx_b, int32_t, int8_t, int8_t, H4)
-DO_DOT_IDX(gvec_udot_idx_b, uint32_t, uint8_t, uint8_t, H4)
-DO_DOT_IDX(gvec_sudot_idx_b, int32_t, int8_t, uint8_t, H4)
-DO_DOT_IDX(gvec_usdot_idx_b, int32_t, uint8_t, int8_t, H4)
-DO_DOT_IDX(gvec_sdot_idx_h, int64_t, int16_t, int16_t, H8)
-DO_DOT_IDX(gvec_udot_idx_h, uint64_t, uint16_t, uint16_t, H8)
+DO_DOT_IDX(gvec_sdot_idx_4b, int32_t, int8_t, int8_t, H4)
+DO_DOT_IDX(gvec_udot_idx_4b, uint32_t, uint8_t, uint8_t, H4)
+DO_DOT_IDX(gvec_sudot_idx_4b, int32_t, int8_t, uint8_t, H4)
+DO_DOT_IDX(gvec_usdot_idx_4b, int32_t, uint8_t, int8_t, H4)
+DO_DOT_IDX(gvec_sdot_idx_4h, int64_t, int16_t, int16_t, H8)
+DO_DOT_IDX(gvec_udot_idx_4h, uint64_t, uint16_t, uint16_t, H8)
 
 void HELPER(gvec_fcaddh)(void *vd, void *vn, void *vm,
                          float_status *fpst, uint32_t desc)
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250704142112.1018902-42-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/helper.h        |  8 ++++
 target/arm/tcg/sme.decode      | 63 ++++++++++++++++++++++++-
 target/arm/tcg/translate-sme.c | 85 ++++++++++++++++++++++++++++++++++
 target/arm/tcg/vec_helper.c    | 51 ++++++++++++++++++++
 4 files changed, 206 insertions(+), 1 deletion(-)

diff --git a/target/arm/tcg/helper.h b/target/arm/tcg/helper.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/helper.h
+++ b/target/arm/tcg/helper.h
@@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(gvec_sdot_4h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32)
 DEF_HELPER_FLAGS_5(gvec_udot_4h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32)
 DEF_HELPER_FLAGS_5(gvec_usdot_4b, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32)
 
+DEF_HELPER_FLAGS_5(gvec_sdot_2h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32)
+DEF_HELPER_FLAGS_5(gvec_udot_2h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32)
+
 DEF_HELPER_FLAGS_5(gvec_sdot_idx_4b, TCG_CALL_NO_RWG,
                    void, ptr, ptr, ptr, ptr, i32)
 DEF_HELPER_FLAGS_5(gvec_udot_idx_4b, TCG_CALL_NO_RWG,
@@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(gvec_sudot_idx_4b, TCG_CALL_NO_RWG,
 DEF_HELPER_FLAGS_5(gvec_usdot_idx_4b, TCG_CALL_NO_RWG,
                    void, ptr, ptr, ptr, ptr, i32)
 
+DEF_HELPER_FLAGS_5(gvec_sdot_idx_2h, TCG_CALL_NO_RWG,
+                   void, ptr, ptr, ptr, ptr, i32)
+DEF_HELPER_FLAGS_5(gvec_udot_idx_2h, TCG_CALL_NO_RWG,
+                   void, ptr, ptr, ptr, ptr, i32)
+
 DEF_HELPER_FLAGS_5(gvec_fcaddh, TCG_CALL_NO_RWG,
                    void, ptr, ptr, ptr, fpst, i32)
 DEF_HELPER_FLAGS_5(gvec_fcadds, TCG_CALL_NO_RWG,
diff --git a/target/arm/tcg/sme.decode b/target/arm/tcg/sme.decode
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/sme.decode
+++ b/target/arm/tcg/sme.decode
@@ -XXX,XX +XXX,XX @@ FDOT_n1         11000001 001 1 .... 0 .. 100 ..... 00 ...   @azz_nx1_o3 n=4
 BFDOT_n1        11000001 001 0 .... 0 .. 100 ..... 10 ...   @azz_nx1_o3 n=2
 BFDOT_n1        11000001 001 1 .... 0 .. 100 ..... 10 ...   @azz_nx1_o3 n=4
 
+USDOT_n1        11000001 001 0 .... 0 .. 101 ..... 01 ...   @azz_nx1_o3 n=2
+USDOT_n1        11000001 001 1 .... 0 .. 101 ..... 01 ...   @azz_nx1_o3 n=4
+
+SUDOT_n1        11000001 001 0 .... 0 .. 101 ..... 11 ...   @azz_nx1_o3 n=2
+SUDOT_n1        11000001 001 1 .... 0 .. 101 ..... 11 ...   @azz_nx1_o3 n=4
+
+SDOT_n1_4b      11000001 001 0 .... 0 .. 101 ..... 00 ...   @azz_nx1_o3 n=2
+SDOT_n1_4b      11000001 001 1 .... 0 .. 101 ..... 00 ...   @azz_nx1_o3 n=4
+SDOT_n1_4h      11000001 011 0 .... 0 .. 101 ..... 00 ...   @azz_nx1_o3 n=2
+SDOT_n1_4h      11000001 011 1 .... 0 .. 101 ..... 00 ...   @azz_nx1_o3 n=4
+SDOT_n1_2h      11000001 011 0 .... 0 .. 101 ..... 01 ...   @azz_nx1_o3 n=2
+SDOT_n1_2h      11000001 011 1 .... 0 .. 101 ..... 01 ...   @azz_nx1_o3 n=4
+
+UDOT_n1_4b      11000001 001 0 .... 0 .. 101 ..... 10 ...   @azz_nx1_o3 n=2
+UDOT_n1_4b      11000001 001 1 .... 0 .. 101 ..... 10 ...   @azz_nx1_o3 n=4
+UDOT_n1_4h      11000001 011 0 .... 0 .. 101 ..... 10 ...   @azz_nx1_o3 n=2
+UDOT_n1_4h      11000001 011 1 .... 0 .. 101 ..... 10 ...   @azz_nx1_o3 n=4
+UDOT_n1_2h      11000001 011 0 .... 0 .. 101 ..... 11 ...   @azz_nx1_o3 n=2
+UDOT_n1_2h      11000001 011 1 .... 0 .. 101 ..... 11 ...   @azz_nx1_o3 n=4
+
 ### SME2 Multi-vector Multiple Array Vectors
 
 %zn_ax2         6:4 !function=times_2
@@ -XXX,XX +XXX,XX @@ FDOT_nn         11000001 101 ...01 0 .. 100 ...00 00 ...    @azz_4x4_o3
 BFDOT_nn        11000001 101 ....0 0 .. 100 ....0 10 ...    @azz_2x2_o3
 BFDOT_nn        11000001 101 ...01 0 .. 100 ...00 10 ...    @azz_4x4_o3
 
+USDOT_nn        11000001 101 ....0 0 .. 101 ....0 01 ...    @azz_2x2_o3
+USDOT_nn        11000001 101 ...01 0 .. 101 ...00 01 ...    @azz_4x4_o3
+
+SDOT_nn_4b      11000001 101 ....0 0 .. 101 ....0 00 ...    @azz_2x2_o3
+SDOT_nn_4b      11000001 101 ...01 0 .. 101 ...00 00 ...    @azz_4x4_o3
+SDOT_nn_4h      11000001 111 ....0 0 .. 101 ....0 00 ...    @azz_2x2_o3
+SDOT_nn_4h      11000001 111 ...01 0 .. 101 ...00 00 ...    @azz_4x4_o3
+SDOT_nn_2h      11000001 111 ....0 0 .. 101 ....0 01 ...    @azz_2x2_o3
+SDOT_nn_2h      11000001 111 ...01 0 .. 101 ...00 01 ...    @azz_4x4_o3
+
+UDOT_nn_4b      11000001 101 ....0 0 .. 101 ....0 10 ...    @azz_2x2_o3
+UDOT_nn_4b      11000001 101 ...01 0 .. 101 ...00 10 ...    @azz_4x4_o3
+UDOT_nn_4h      11000001 111 ....0 0 .. 101 ....0 10 ...    @azz_2x2_o3
+UDOT_nn_4h      11000001 111 ...01 0 .. 101 ...00 10 ...    @azz_4x4_o3
+UDOT_nn_2h      11000001 111 ....0 0 .. 101 ....0 11 ...    @azz_2x2_o3
+UDOT_nn_2h      11000001 111 ...01 0 .. 101 ...00 11 ...    @azz_4x4_o3
+
 ### SME2 Multi-vector Indexed
 
 &azx_n          n off rv zn zm idx
@@ -XXX,XX +XXX,XX @@ BFMLSL_nx       11000001 1001 .... 1 .. 1 .. ...00 11 ...   @azx_4x1_o2x2
 @azx_2x1_i2_o3  ........ .... zm:4 . .. . idx:2 .... ... off:3 \
                 &azx_n n=2 rv=%mova_rv zn=%zn_ax2
 @azx_4x1_i2_o3  ........ .... zm:4 . .. . idx:2 .... ... off:3 \
-                &azx_n n=2 rv=%mova_rv zn=%zn_ax4
+                &azx_n n=4 rv=%mova_rv zn=%zn_ax4
+@azx_2x1_i1_o3  ........ .... zm:4 . .. .. idx:1 .... ... off:3 \
+                &azx_n n=2 rv=%mova_rv zn=%zn_ax2
+@azx_4x1_i1_o3  ........ .... zm:4 . .. .. idx:1 .... ... off:3 \
+                &azx_n n=4 rv=%mova_rv zn=%zn_ax4
 
 FDOT_nx         11000001 0101 .... 0 .. 1 .. ....0 01 ...   @azx_2x1_i2_o3
 FDOT_nx         11000001 0101 .... 1 .. 1 .. ...00 01 ...   @azx_4x1_i2_o3
@@ -XXX,XX +XXX,XX @@ BFDOT_nx        11000001 0101 .... 1 .. 1 .. ...00 11 ...   @azx_4x1_i2_o3
 
 FVDOT           11000001 0101 .... 0 .. 0 .. ....0 01 ...   @azx_2x1_i2_o3
 BFVDOT          11000001 0101 .... 0 .. 0 .. ....0 11 ...   @azx_2x1_i2_o3
+
+SDOT_nx_2h      11000001 0101 .... 0 .. 1 .. ....0 00 ...   @azx_2x1_i2_o3
+SDOT_nx_2h      11000001 0101 .... 1 .. 1 .. ...00 00 ...   @azx_4x1_i2_o3
+SDOT_nx_4b      11000001 0101 .... 0 .. 1 .. ....1 00 ...   @azx_2x1_i2_o3
+SDOT_nx_4b      11000001 0101 .... 1 .. 1 .. ...01 00 ...   @azx_4x1_i2_o3
+SDOT_nx_4h      11000001 1101 .... 0 .. 00 . ....0 01 ...   @azx_2x1_i1_o3
+SDOT_nx_4h      11000001 1101 .... 1 .. 00 . ...00 01 ...   @azx_4x1_i1_o3
+
+UDOT_nx_2h      11000001 0101 .... 0 .. 1 .. ....0 10 ...   @azx_2x1_i2_o3
+UDOT_nx_2h      11000001 0101 .... 1 .. 1 .. ...00 10 ...   @azx_4x1_i2_o3
+UDOT_nx_4b      11000001 0101 .... 0 .. 1 .. ....1 10 ...   @azx_2x1_i2_o3
+UDOT_nx_4b      11000001 0101 .... 1 .. 1 .. ...01 10 ...   @azx_4x1_i2_o3
+UDOT_nx_4h      11000001 1101 .... 0 .. 00 . ....0 11 ...   @azx_2x1_i1_o3
+UDOT_nx_4h      11000001 1101 .... 1 .. 00 . ...00 11 ...   @azx_4x1_i1_o3
+
+USDOT_nx        11000001 0101 .... 0 .. 1 .. ....1 01 ...   @azx_2x1_i2_o3
+USDOT_nx        11000001 0101 .... 1 .. 1 .. ...01 01 ...   @azx_4x1_i2_o3
+
+SUDOT_nx        11000001 0101 .... 0 .. 1 .. ....1 11 ...   @azx_2x1_i2_o3
+SUDOT_nx        11000001 0101 .... 1 .. 1 .. ...01 11 ...   @azx_4x1_i2_o3
diff --git a/target/arm/tcg/translate-sme.c b/target/arm/tcg/translate-sme.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-sme.c
+++ b/target/arm/tcg/translate-sme.c
@@ -XXX,XX +XXX,XX @@ static bool do_vdot(DisasContext *s, arg_azx_n *a, gen_helper_gvec_4_ptr *fn)
 
 TRANS_FEAT(FVDOT, aa64_sme, do_vdot, a, gen_helper_sme2_fvdot_idx_h)
 TRANS_FEAT(BFVDOT, aa64_sme, do_vdot, a, gen_helper_sme2_bfvdot_idx)
+
+/*
+ * Expand array multi-vector single (n1), array multi-vector (nn),
+ * and array multi-vector indexed (nx), for integer accumulate.
+ *   multi: true for nn, false for n1.
+ *   data: stuff for simd_data, including any index.
+ */
+static bool do_azz_acc(DisasContext *s, int nreg, int nsel,
+                       int rv, int off, int zn, int zm,
+                       int data, int shsel, bool multi,
+                       gen_helper_gvec_4 *fn)
+{
+    if (sme_smza_enabled_check(s)) {
+        int svl = streaming_vec_reg_size(s);
+        int vstride = svl / nreg;
+        TCGv_ptr t_za = get_zarray(s, rv, off, nreg, nsel);
+        TCGv_ptr t = tcg_temp_new_ptr();
+
+        for (int r = 0; r < nreg; ++r) {
+            TCGv_ptr t_zn = vec_full_reg_ptr(s, zn);
+            TCGv_ptr t_zm = vec_full_reg_ptr(s, zm);
+
+            for (int i = 0; i < nsel; ++i) {
+                int o_za = (r * vstride + i) * sizeof(ARMVectorReg);
+                int desc = simd_desc(svl, svl, data | (i << shsel));
+
+                tcg_gen_addi_ptr(t, t_za, o_za);
+                fn(t, t_zn, t_zm, t, tcg_constant_i32(desc));
+            }
+
+            /*
+             * For multiple-and-single vectors, Zn may wrap.
+             * For multiple vectors, both Zn and Zm are aligned.
+             */
+            zn = (zn + 1) % 32;
+            zm += multi;
+        }
+    }
+    return true;
+}
+
+static bool do_dot(DisasContext *s, arg_azz_n *a, bool multi,
+                   gen_helper_gvec_4 *fn)
+{
+    return do_azz_acc(s, a->n, 1, a->rv, a->off, a->zn, a->zm,
+                      0, 0, multi, fn);
+}
+
+static void gen_helper_gvec_sudot_4b(TCGv_ptr d, TCGv_ptr n, TCGv_ptr m,
+                                     TCGv_ptr a, TCGv_i32 desc)
+{
+    gen_helper_gvec_usdot_4b(d, m, n, a, desc);
+}
+
+TRANS_FEAT(USDOT_n1, aa64_sme2, do_dot, a, false, gen_helper_gvec_usdot_4b)
+TRANS_FEAT(SUDOT_n1, aa64_sme2, do_dot, a, false, gen_helper_gvec_sudot_4b)
+TRANS_FEAT(SDOT_n1_2h, aa64_sme2, do_dot, a, false, gen_helper_gvec_sdot_2h)
+TRANS_FEAT(UDOT_n1_2h, aa64_sme2, do_dot, a, false, gen_helper_gvec_udot_2h)
+TRANS_FEAT(SDOT_n1_4b, aa64_sme2, do_dot, a, false, gen_helper_gvec_sdot_4b)
+TRANS_FEAT(UDOT_n1_4b, aa64_sme2, do_dot, a, false, gen_helper_gvec_udot_4b)
+TRANS_FEAT(SDOT_n1_4h, aa64_sme2_i16i64, do_dot, a, false, gen_helper_gvec_sdot_4h)
+TRANS_FEAT(UDOT_n1_4h, aa64_sme2_i16i64, do_dot, a, false, gen_helper_gvec_udot_4h)
+
+TRANS_FEAT(USDOT_nn, aa64_sme2, do_dot, a, true, gen_helper_gvec_usdot_4b)
+TRANS_FEAT(SDOT_nn_2h, aa64_sme2, do_dot, a, true, gen_helper_gvec_sdot_2h)
+TRANS_FEAT(UDOT_nn_2h, aa64_sme2, do_dot, a, true, gen_helper_gvec_udot_2h)
+TRANS_FEAT(SDOT_nn_4b, aa64_sme2, do_dot, a, true, gen_helper_gvec_sdot_4b)
+TRANS_FEAT(UDOT_nn_4b, aa64_sme2, do_dot, a, true, gen_helper_gvec_udot_4b)
+TRANS_FEAT(SDOT_nn_4h, aa64_sme2_i16i64, do_dot, a, true, gen_helper_gvec_sdot_4h)
+TRANS_FEAT(UDOT_nn_4h, aa64_sme2_i16i64, do_dot, a, true, gen_helper_gvec_udot_4h)
+
+static bool do_dot_nx(DisasContext *s, arg_azx_n *a, gen_helper_gvec_4 *fn)
+{
+    return do_azz_acc(s, a->n, 1, a->rv, a->off, a->zn, a->zm,
+                      a->idx, 0, false, fn);
+}
+
+TRANS_FEAT(USDOT_nx, aa64_sme2, do_dot_nx, a, gen_helper_gvec_usdot_idx_4b)
+TRANS_FEAT(SUDOT_nx, aa64_sme2, do_dot_nx, a, gen_helper_gvec_sudot_idx_4b)
+TRANS_FEAT(SDOT_nx_2h, aa64_sme2, do_dot_nx, a, gen_helper_gvec_sdot_idx_2h)
+TRANS_FEAT(UDOT_nx_2h, aa64_sme2, do_dot_nx, a, gen_helper_gvec_udot_idx_2h)
+TRANS_FEAT(SDOT_nx_4b, aa64_sme2, do_dot_nx, a, gen_helper_gvec_sdot_idx_4b)
+TRANS_FEAT(UDOT_nx_4b, aa64_sme2, do_dot_nx, a, gen_helper_gvec_udot_idx_4b)
+TRANS_FEAT(SDOT_nx_4h, aa64_sme2_i16i64, do_dot_nx, a, gen_helper_gvec_sdot_idx_4h)
+TRANS_FEAT(UDOT_nx_4h, aa64_sme2_i16i64, do_dot_nx, a, gen_helper_gvec_udot_idx_4h)
diff --git a/target/arm/tcg/vec_helper.c b/target/arm/tcg/vec_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/vec_helper.c
+++ b/target/arm/tcg/vec_helper.c
@@ -XXX,XX +XXX,XX @@ DO_DOT_IDX(gvec_usdot_idx_4b, int32_t, uint8_t, int8_t, H4)
 DO_DOT_IDX(gvec_sdot_idx_4h, int64_t, int16_t, int16_t, H8)
 DO_DOT_IDX(gvec_udot_idx_4h, uint64_t, uint16_t, uint16_t, H8)
 
+#undef DO_DOT
+#undef DO_DOT_IDX
+
+/* Similar for 2-way dot product */
+#define DO_DOT(NAME, TYPED, TYPEN, TYPEM) \
+void HELPER(NAME)(void *vd, void *vn, void *vm, void *va, uint32_t desc)  \
+{                                                                         \
+    intptr_t i, opr_sz = simd_oprsz(desc);                                \
+    TYPED *d = vd, *a = va;                                               \
+    TYPEN *n = vn;                                                        \
+    TYPEM *m = vm;                                                        \
+    for (i = 0; i < opr_sz / sizeof(TYPED); ++i) {                        \
+        d[i] = (a[i] +                                                    \
+                (TYPED)n[i * 2 + 0] * m[i * 2 + 0] +                      \
+                (TYPED)n[i * 2 + 1] * m[i * 2 + 1]);                      \
+    }                                                                     \
+    clear_tail(d, opr_sz, simd_maxsz(desc));                              \
+}
+
+#define DO_DOT_IDX(NAME, TYPED, TYPEN, TYPEM, HD) \
+void HELPER(NAME)(void *vd, void *vn, void *vm, void *va, uint32_t desc)  \
+{                                                                         \
+    intptr_t i = 0, opr_sz = simd_oprsz(desc);                            \
+    intptr_t opr_sz_n = opr_sz / sizeof(TYPED);                           \
+    intptr_t segend = MIN(16 / sizeof(TYPED), opr_sz_n);                  \
+    intptr_t index = simd_data(desc);                                     \
+    TYPED *d = vd, *a = va;                                               \
+    TYPEN *n = vn;                                                        \
+    TYPEM *m_indexed = (TYPEM *)vm + HD(index) * 2;                       \
+    do {                                                                  \
+        TYPED m0 = m_indexed[i * 2 + 0];                                  \
+        TYPED m1 = m_indexed[i * 2 + 1];                                  \
+        do {                                                              \
+            d[i] = (a[i] +                                                \
+                    n[i * 2 + 0] * m0 +                                   \
+                    n[i * 2 + 1] * m1);                                   \
+        } while (++i < segend);                                           \
+        segend = i + (16 / sizeof(TYPED));                                \
+    } while (i < opr_sz_n);                                               \
+    clear_tail(d, opr_sz, simd_maxsz(desc));                              \
+}
+
+DO_DOT(gvec_sdot_2h, int32_t, int16_t, int16_t)
+DO_DOT(gvec_udot_2h, uint32_t, uint16_t, uint16_t)
+
+DO_DOT_IDX(gvec_sdot_idx_2h, int32_t, int16_t, int16_t, H4)
+DO_DOT_IDX(gvec_udot_idx_2h, uint32_t, uint16_t, uint16_t, H4)
+
+#undef DO_DOT
+#undef DO_DOT_IDX
+
 void HELPER(gvec_fcaddh)(void *vd, void *vn, void *vm,
                          float_status *fpst, uint32_t desc)
 {
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Emphasize the 4-way nature of these dot products.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-43-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/sve.decode      | 12 ++++++------
 target/arm/tcg/translate-sve.c | 12 ++++++------
 2 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/target/arm/tcg/sve.decode b/target/arm/tcg/sve.decode
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/sve.decode
+++ b/target/arm/tcg/sve.decode
@@ -XXX,XX +XXX,XX @@ CDOT_zzzz       01000100 esz:2 0 rm:5 0001 rot:2 rn:5 rd:5  ra=%reg_movprfx
 #### SVE Multiply - Indexed
 
 # SVE integer dot product (indexed)
-SDOT_zzxw_s     01000100 10 1 ..... 000000 ..... .....   @rrxr_2 esz=2
-SDOT_zzxw_d     01000100 11 1 ..... 000000 ..... .....   @rrxr_1 esz=3
-UDOT_zzxw_s     01000100 10 1 ..... 000001 ..... .....   @rrxr_2 esz=2
-UDOT_zzxw_d     01000100 11 1 ..... 000001 ..... .....   @rrxr_1 esz=3
+SDOT_zzxw_4s    01000100 10 1 ..... 000000 ..... .....   @rrxr_2 esz=2
+SDOT_zzxw_4d    01000100 11 1 ..... 000000 ..... .....   @rrxr_1 esz=3
+UDOT_zzxw_4s    01000100 10 1 ..... 000001 ..... .....   @rrxr_2 esz=2
+UDOT_zzxw_4d    01000100 11 1 ..... 000001 ..... .....   @rrxr_1 esz=3
 
 # SVE2 integer multiply-add (indexed)
 MLA_zzxz_h      01000100 0. 1 ..... 000010 ..... .....   @rrxr_3 esz=1
@@ -XXX,XX +XXX,XX @@ SQRDMLSH_zzxz_s 01000100 10 1 ..... 000101 ..... .....   @rrxr_2 esz=2
 SQRDMLSH_zzxz_d 01000100 11 1 ..... 000101 ..... .....   @rrxr_1 esz=3
 
 # SVE mixed sign dot product (indexed)
-USDOT_zzxw_s    01000100 10 1 ..... 000110 ..... .....   @rrxr_2 esz=2
-SUDOT_zzxw_s    01000100 10 1 ..... 000111 ..... .....   @rrxr_2 esz=2
+USDOT_zzxw_4s   01000100 10 1 ..... 000110 ..... .....   @rrxr_2 esz=2
+SUDOT_zzxw_4s   01000100 10 1 ..... 000111 ..... .....   @rrxr_2 esz=2
 
 # SVE2 saturating multiply-add (indexed)
 SQDMLALB_zzxw_s 01000100 10 1 ..... 0010.0 ..... .....   @rrxr_3a esz=2
diff --git a/target/arm/tcg/translate-sve.c b/target/arm/tcg/translate-sve.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-sve.c
+++ b/target/arm/tcg/translate-sve.c
@@ -XXX,XX +XXX,XX @@ TRANS_FEAT(DOT_zzzz, aa64_sve, gen_gvec_ool_zzzz,
  * SVE Multiply - Indexed
  */
 
-TRANS_FEAT(SDOT_zzxw_s, aa64_sve, gen_gvec_ool_arg_zzxz,
+TRANS_FEAT(SDOT_zzxw_4s, aa64_sve, gen_gvec_ool_arg_zzxz,
            gen_helper_gvec_sdot_idx_4b, a)
-TRANS_FEAT(SDOT_zzxw_d, aa64_sve, gen_gvec_ool_arg_zzxz,
+TRANS_FEAT(SDOT_zzxw_4d, aa64_sve, gen_gvec_ool_arg_zzxz,
            gen_helper_gvec_sdot_idx_4h, a)
-TRANS_FEAT(UDOT_zzxw_s, aa64_sve, gen_gvec_ool_arg_zzxz,
+TRANS_FEAT(UDOT_zzxw_4s, aa64_sve, gen_gvec_ool_arg_zzxz,
            gen_helper_gvec_udot_idx_4b, a)
-TRANS_FEAT(UDOT_zzxw_d, aa64_sve, gen_gvec_ool_arg_zzxz,
+TRANS_FEAT(UDOT_zzxw_4d, aa64_sve, gen_gvec_ool_arg_zzxz,
            gen_helper_gvec_udot_idx_4h, a)
 
-TRANS_FEAT(SUDOT_zzxw_s, aa64_sve_i8mm, gen_gvec_ool_arg_zzxz,
+TRANS_FEAT(SUDOT_zzxw_4s, aa64_sve_i8mm, gen_gvec_ool_arg_zzxz,
            gen_helper_gvec_sudot_idx_4b, a)
-TRANS_FEAT(USDOT_zzxw_s, aa64_sve_i8mm, gen_gvec_ool_arg_zzxz,
+TRANS_FEAT(USDOT_zzxw_4s, aa64_sve_i8mm, gen_gvec_ool_arg_zzxz,
            gen_helper_gvec_usdot_idx_4b, a)
 
 #define DO_SVE2_RRX(NAME, FUNC) \
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Rename to USDOT_zzzz_4s and force size=2 during decode.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-44-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/sve.decode      | 2 +-
 target/arm/tcg/translate-sve.c | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/target/arm/tcg/sve.decode b/target/arm/tcg/sve.decode
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/sve.decode
+++ b/target/arm/tcg/sve.decode
@@ -XXX,XX +XXX,XX @@ SQRDCMLAH_zzzz  01000100 esz:2 0 rm:5 0011 rot:2 rn:5 rd:5  ra=%reg_movprfx
 
 ## SVE mixed sign dot product
 
-USDOT_zzzz      01000100 .. 0 ..... 011 110 ..... .....  @rda_rn_rm
+USDOT_zzzz_4s   01000100 10 0 ..... 011 110 ..... .....  @rda_rn_rm_ex esz=2
 
 ### SVE2 floating point matrix multiply accumulate
 BFMMLA          01100100 01 1 ..... 111 001 ..... .....  @rda_rn_rm_ex esz=1
diff --git a/target/arm/tcg/translate-sve.c b/target/arm/tcg/translate-sve.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-sve.c
+++ b/target/arm/tcg/translate-sve.c
@@ -XXX,XX +XXX,XX @@ static gen_helper_gvec_4 * const sqrdcmlah_fns[] = {
 TRANS_FEAT(SQRDCMLAH_zzzz, aa64_sve2, gen_gvec_ool_zzzz,
            sqrdcmlah_fns[a->esz], a->rd, a->rn, a->rm, a->ra, a->rot)
 
-TRANS_FEAT(USDOT_zzzz, aa64_sve_i8mm, gen_gvec_ool_arg_zzzz,
-           a->esz == 2 ? gen_helper_gvec_usdot_4b : NULL, a, 0)
+TRANS_FEAT(USDOT_zzzz_4s, aa64_sve_i8mm, gen_gvec_ool_arg_zzzz,
+           gen_helper_gvec_usdot_4b, a, 0)
 
 TRANS_FEAT_NONSTREAMING(AESMC, aa64_sve2_aes, gen_gvec_ool_zz,
                         gen_helper_crypto_aesmc, a->rd, a->rd, 0)
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-45-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/sve.decode      |  8 +++++++-
 target/arm/tcg/translate-sve.c | 10 ++++++++++
 2 files changed, 17 insertions(+), 1 deletion(-)

diff --git a/target/arm/tcg/sve.decode b/target/arm/tcg/sve.decode
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/sve.decode
+++ b/target/arm/tcg/sve.decode
@@ -XXX,XX +XXX,XX @@ SDOT_zzxw_4d    01000100 11 1 ..... 000000 ..... .....   @rrxr_1 esz=3
 UDOT_zzxw_4s    01000100 10 1 ..... 000001 ..... .....   @rrxr_2 esz=2
 UDOT_zzxw_4d    01000100 11 1 ..... 000001 ..... .....   @rrxr_1 esz=3
 
+SDOT_zzxw_2s    01000100 10 0 ..... 110010 ..... .....   @rrxr_2 esz=2
+UDOT_zzxw_2s    01000100 10 0 ..... 110011 ..... .....   @rrxr_2 esz=2
+
 # SVE2 integer multiply-add (indexed)
 MLA_zzxz_h      01000100 0. 1 ..... 000010 ..... .....   @rrxr_3 esz=1
 MLA_zzxz_s      01000100 10 1 ..... 000010 ..... .....   @rrxr_2 esz=2
@@ -XXX,XX +XXX,XX @@ UMLSLT_zzzw     01000100 .. 0 ..... 010 111 ..... .....  @rda_rn_rm
 CMLA_zzzz       01000100 esz:2 0 rm:5 0010 rot:2 rn:5 rd:5  ra=%reg_movprfx
 SQRDCMLAH_zzzz  01000100 esz:2 0 rm:5 0011 rot:2 rn:5 rd:5  ra=%reg_movprfx
 
-## SVE mixed sign dot product
+## SVE dot product
+
+SDOT_zzzz_2s    01000100 00 0 ..... 110 010 ..... .....  @rda_rn_rm_ex esz=2
+UDOT_zzzz_2s    01000100 00 0 ..... 110 011 ..... .....  @rda_rn_rm_ex esz=2
 
 USDOT_zzzz_4s   01000100 10 0 ..... 011 110 ..... .....  @rda_rn_rm_ex esz=2
 
diff --git a/target/arm/tcg/translate-sve.c b/target/arm/tcg/translate-sve.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-sve.c
+++ b/target/arm/tcg/translate-sve.c
@@ -XXX,XX +XXX,XX @@ TRANS_FEAT(SUDOT_zzxw_4s, aa64_sve_i8mm, gen_gvec_ool_arg_zzxz,
 TRANS_FEAT(USDOT_zzxw_4s, aa64_sve_i8mm, gen_gvec_ool_arg_zzxz,
            gen_helper_gvec_usdot_idx_4b, a)
 
+TRANS_FEAT(SDOT_zzxw_2s, aa64_sme2_or_sve2p1, gen_gvec_ool_arg_zzxz,
+           gen_helper_gvec_sdot_idx_2h, a)
+TRANS_FEAT(UDOT_zzxw_2s, aa64_sme2_or_sve2p1, gen_gvec_ool_arg_zzxz,
+           gen_helper_gvec_udot_idx_2h, a)
+
 #define DO_SVE2_RRX(NAME, FUNC) \
     TRANS_FEAT(NAME, aa64_sve, gen_gvec_ool_zzz, FUNC,          \
                a->rd, a->rn, a->rm, a->index)
@@ -XXX,XX +XXX,XX @@ TRANS_FEAT(SQRDCMLAH_zzzz, aa64_sve2, gen_gvec_ool_zzzz,
 TRANS_FEAT(USDOT_zzzz_4s, aa64_sve_i8mm, gen_gvec_ool_arg_zzzz,
            gen_helper_gvec_usdot_4b, a, 0)
 
+TRANS_FEAT(SDOT_zzzz_2s, aa64_sme2_or_sve2p1, gen_gvec_ool_arg_zzzz,
+           gen_helper_gvec_sdot_2h, a, 0)
+TRANS_FEAT(UDOT_zzzz_2s, aa64_sme2_or_sve2p1, gen_gvec_ool_arg_zzzz,
+           gen_helper_gvec_udot_2h, a, 0)
+
 TRANS_FEAT_NONSTREAMING(AESMC, aa64_sve2_aes, gen_gvec_ool_zz,
                         gen_helper_crypto_aesmc, a->rd, a->rd, 0)
 TRANS_FEAT_NONSTREAMING(AESIMC, aa64_sve2_aes, gen_gvec_ool_zz,
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-46-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/helper-sme.h    | 11 +++++++++
 target/arm/tcg/sme.decode      | 11 +++++++++
 target/arm/tcg/sme_helper.c    | 42 ++++++++++++++++++++++++++++++++++
 target/arm/tcg/translate-sme.c | 23 +++++++++++++++++++
 4 files changed, 87 insertions(+)

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-47-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/helper-sme.h    |  21 +++++
 target/arm/tcg/sme.decode      | 168 +++++++++++++++++++++++++++++++++
 target/arm/tcg/sme_helper.c    |  59 ++++++++++++
 target/arm/tcg/translate-sme.c |  84 +++++++++++++++++
 4 files changed, 332 insertions(+)

diff --git a/target/arm/tcg/helper-sme.h b/target/arm/tcg/helper-sme.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/helper-sme.h
+++ b/target/arm/tcg/helper-sme.h
@@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_4(sme2_uvdot_idx_4h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
 
 DEF_HELPER_FLAGS_4(sme2_svdot_idx_2h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
 DEF_HELPER_FLAGS_4(sme2_uvdot_idx_2h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
+
+DEF_HELPER_FLAGS_5(sme2_smlall_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32)
+DEF_HELPER_FLAGS_5(sme2_smlall_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32)
+DEF_HELPER_FLAGS_5(sme2_smlsll_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32)
+DEF_HELPER_FLAGS_5(sme2_smlsll_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32)
+DEF_HELPER_FLAGS_5(sme2_umlall_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32)
+DEF_HELPER_FLAGS_5(sme2_umlall_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32)
+DEF_HELPER_FLAGS_5(sme2_umlsll_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32)
+DEF_HELPER_FLAGS_5(sme2_umlsll_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32)
+DEF_HELPER_FLAGS_5(sme2_usmlall_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32)
+
+DEF_HELPER_FLAGS_5(sme2_smlall_idx_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32)
+DEF_HELPER_FLAGS_5(sme2_smlall_idx_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32)
+DEF_HELPER_FLAGS_5(sme2_smlsll_idx_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32)
+DEF_HELPER_FLAGS_5(sme2_smlsll_idx_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32)
+DEF_HELPER_FLAGS_5(sme2_umlall_idx_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32)
+DEF_HELPER_FLAGS_5(sme2_umlall_idx_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32)
+DEF_HELPER_FLAGS_5(sme2_umlsll_idx_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32)
+DEF_HELPER_FLAGS_5(sme2_umlsll_idx_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32)
+DEF_HELPER_FLAGS_5(sme2_usmlall_idx_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32)
+DEF_HELPER_FLAGS_5(sme2_sumlall_idx_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32)
diff --git a/target/arm/tcg/sme.decode b/target/arm/tcg/sme.decode
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/sme.decode
+++ b/target/arm/tcg/sme.decode
@@ -XXX,XX +XXX,XX @@ UDOT_n1_4h      11000001 011 1 .... 0 .. 101 ..... 10 ...   @azz_nx1_o3 n=4
 UDOT_n1_2h      11000001 011 0 .... 0 .. 101 ..... 11 ...   @azz_nx1_o3 n=2
 UDOT_n1_2h      11000001 011 1 .... 0 .. 101 ..... 11 ...   @azz_nx1_o3 n=4
 
+SMLAL_n1        11000001 011 0 .... 0 .. 011 ..... 00 ...   @azz_nx1_o3x2 n=1
+SMLAL_n1        11000001 011 0 .... 0 .. 010 ..... 000 ..   @azz_nx1_o2x2 n=2
+SMLAL_n1        11000001 011 1 .... 0 .. 010 ..... 000 ..   @azz_nx1_o2x2 n=4
+
+SMLSL_n1        11000001 011 0 .... 0 .. 011 ..... 01 ...   @azz_nx1_o3x2 n=1
+SMLSL_n1        11000001 011 0 .... 0 .. 010 ..... 010 ..   @azz_nx1_o2x2 n=2
+SMLSL_n1        11000001 011 1 .... 0 .. 010 ..... 010 ..   @azz_nx1_o2x2 n=4
+
+UMLAL_n1        11000001 011 0 .... 0 .. 011 ..... 10 ...   @azz_nx1_o3x2 n=1
+UMLAL_n1        11000001 011 0 .... 0 .. 010 ..... 100 ..   @azz_nx1_o2x2 n=2
+UMLAL_n1        11000001 011 1 .... 0 .. 010 ..... 100 ..   @azz_nx1_o2x2 n=4
+
+UMLSL_n1        11000001 011 0 .... 0 .. 011 ..... 11 ...   @azz_nx1_o3x2 n=1
+UMLSL_n1        11000001 011 0 .... 0 .. 010 ..... 110 ..   @azz_nx1_o2x2 n=2
+UMLSL_n1        11000001 011 1 .... 0 .. 010 ..... 110 ..   @azz_nx1_o2x2 n=4
+
+%off2_x4        0:2 !function=times_4
+%off1_x4        0:1 !function=times_4
+
+@azz_nx1_o2x4   ........ ... . zm:4 . .. ... zn:5 ... ..    \
+                &azz_n off=%off2_x4 rv=%mova_rv
+@azz_nx1_o1x4   ........ ... . zm:4 . .. ... zn:5 .... .    \
+                &azz_n off=%off1_x4 rv=%mova_rv
+
+SMLALL_n1_s     11000001 001 0 .... 0 .. 001 ..... 000 ..   @azz_nx1_o2x4 n=1
+SMLALL_n1_d     11000001 011 0 .... 0 .. 001 ..... 000 ..   @azz_nx1_o2x4 n=1
+SMLALL_n1_s     11000001 001 0 .... 0 .. 000 ..... 0000 .   @azz_nx1_o1x4 n=2
+SMLALL_n1_d     11000001 011 0 .... 0 .. 000 ..... 0000 .   @azz_nx1_o1x4 n=2
+SMLALL_n1_s     11000001 001 1 .... 0 .. 000 ..... 0000 .   @azz_nx1_o1x4 n=4
+SMLALL_n1_d     11000001 011 1 .... 0 .. 000 ..... 0000 .   @azz_nx1_o1x4 n=4
+
+SMLSLL_n1_s     11000001 001 0 .... 0 .. 001 ..... 010 ..   @azz_nx1_o2x4 n=1
+SMLSLL_n1_d     11000001 011 0 .... 0 .. 001 ..... 010 ..   @azz_nx1_o2x4 n=1
+SMLSLL_n1_s     11000001 001 0 .... 0 .. 000 ..... 0100 .   @azz_nx1_o1x4 n=2
+SMLSLL_n1_d     11000001 011 0 .... 0 .. 000 ..... 0100 .   @azz_nx1_o1x4 n=2
+SMLSLL_n1_s     11000001 001 1 .... 0 .. 000 ..... 0100 .   @azz_nx1_o1x4 n=4
+SMLSLL_n1_d     11000001 011 1 .... 0 .. 000 ..... 0100 .   @azz_nx1_o1x4 n=4
+
+UMLALL_n1_s     11000001 001 0 .... 0 .. 001 ..... 100 ..   @azz_nx1_o2x4 n=1
+UMLALL_n1_d     11000001 011 0 .... 0 .. 001 ..... 100 ..   @azz_nx1_o2x4 n=1
+UMLALL_n1_s     11000001 001 0 .... 0 .. 000 ..... 1000 .   @azz_nx1_o1x4 n=2
+UMLALL_n1_d     11000001 011 0 .... 0 .. 000 ..... 1000 .   @azz_nx1_o1x4 n=2
+UMLALL_n1_s     11000001 001 1 .... 0 .. 000 ..... 1000 .   @azz_nx1_o1x4 n=4
+UMLALL_n1_d     11000001 011 1 .... 0 .. 000 ..... 1000 .   @azz_nx1_o1x4 n=4
+
+UMLSLL_n1_s     11000001 001 0 .... 0 .. 001 ..... 110 ..   @azz_nx1_o2x4 n=1
+UMLSLL_n1_d     11000001 011 0 .... 0 .. 001 ..... 110 ..   @azz_nx1_o2x4 n=1
+UMLSLL_n1_s     11000001 001 0 .... 0 .. 000 ..... 1100 .   @azz_nx1_o1x4 n=2
+UMLSLL_n1_d     11000001 011 0 .... 0 .. 000 ..... 1100 .   @azz_nx1_o1x4 n=2
+UMLSLL_n1_s     11000001 001 1 .... 0 .. 000 ..... 1100 .   @azz_nx1_o1x4 n=4
+UMLSLL_n1_d     11000001 011 1 .... 0 .. 000 ..... 1100 .   @azz_nx1_o1x4 n=4
+
+USMLALL_n1_s    11000001 001 0 .... 0 .. 001 ..... 001 ..   @azz_nx1_o2x4 n=1
+USMLALL_n1_s    11000001 001 0 .... 0 .. 000 ..... 0010 .   @azz_nx1_o1x4 n=2
+USMLALL_n1_s    11000001 001 1 .... 0 .. 000 ..... 0010 .   @azz_nx1_o1x4 n=4
+
+SUMLALL_n1_s    11000001 001 0 .... 0 .. 000 ..... 1010 .   @azz_nx1_o1x4 n=2
+SUMLALL_n1_s    11000001 001 1 .... 0 .. 000 ..... 1010 .   @azz_nx1_o1x4 n=4
+
 ### SME2 Multi-vector Multiple Array Vectors
 
 %zn_ax2         6:4 !function=times_2
@@ -XXX,XX +XXX,XX @@ UDOT_nn_4h      11000001 111 ...01 0 .. 101 ...00 10 ...    @azz_4x4_o3
 UDOT_nn_2h      11000001 111 ....0 0 .. 101 ....0 11 ...    @azz_2x2_o3
 UDOT_nn_2h      11000001 111 ...01 0 .. 101 ...00 11 ...    @azz_4x4_o3
 
+SMLAL_nn        11000001 111 ....0 0 .. 010 ....0 000 ..    @azz_2x2_o2x2
+SMLAL_nn        11000001 111 ...01 0 .. 010 ...00 000 ..    @azz_4x4_o2x2
+
+SMLSL_nn        11000001 111 ....0 0 .. 010 ....0 010 ..    @azz_2x2_o2x2
+SMLSL_nn        11000001 111 ...01 0 .. 010 ...00 010 ..    @azz_4x4_o2x2
+
+UMLAL_nn        11000001 111 ....0 0 .. 010 ....0 100 ..    @azz_2x2_o2x2
+UMLAL_nn        11000001 111 ...01 0 .. 010 ...00 100 ..    @azz_4x4_o2x2
+
+UMLSL_nn        11000001 111 ....0 0 .. 010 ....0 110 ..    @azz_2x2_o2x2
+UMLSL_nn        11000001 111 ...01 0 .. 010 ...00 110 ..    @azz_4x4_o2x2
+
+@azz_2x2_o1x4   ........ ... ..... . .. ... ..... ... ..    \
+                &azz_n n=2 rv=%mova_rv zn=%zn_ax2 zm=%zm_ax2 off=%off1_x4
+@azz_4x4_o1x4   ........ ... ..... . .. ... ..... ... ..    \
+                &azz_n n=4 rv=%mova_rv zn=%zn_ax4 zm=%zm_ax4 off=%off1_x4
+
+SMLALL_nn_s     11000001 101 ....0 0 .. 000 ....0 0000 .    @azz_2x2_o1x4
+SMLALL_nn_d     11000001 111 ....0 0 .. 000 ....0 0000 .    @azz_2x2_o1x4
+SMLALL_nn_s     11000001 101 ...01 0 .. 000 ...00 0000 .    @azz_4x4_o1x4
+SMLALL_nn_d     11000001 111 ...01 0 .. 000 ...00 0000 .    @azz_4x4_o1x4
+
+SMLSLL_nn_s     11000001 101 ....0 0 .. 000 ....0 0100 .    @azz_2x2_o1x4
+SMLSLL_nn_d     11000001 111 ....0 0 .. 000 ....0 0100 .    @azz_2x2_o1x4
+SMLSLL_nn_s     11000001 101 ...01 0 .. 000 ...00 0100 .    @azz_4x4_o1x4
+SMLSLL_nn_d     11000001 111 ...01 0 .. 000 ...00 0100 .    @azz_4x4_o1x4
+
+UMLALL_nn_s     11000001 101 ....0 0 .. 000 ....0 1000 .    @azz_2x2_o1x4
+UMLALL_nn_d     11000001 111 ....0 0 .. 000 ....0 1000 .    @azz_2x2_o1x4
+UMLALL_nn_s     11000001 101 ...01 0 .. 000 ...00 1000 .    @azz_4x4_o1x4
+UMLALL_nn_d     11000001 111 ...01 0 .. 000 ...00 1000 .    @azz_4x4_o1x4
+
+UMLSLL_nn_s     11000001 101 ....0 0 .. 000 ....0 1100 .    @azz_2x2_o1x4
+UMLSLL_nn_d     11000001 111 ....0 0 .. 000 ....0 1100 .    @azz_2x2_o1x4
+UMLSLL_nn_s     11000001 101 ...01 0 .. 000 ...00 1100 .    @azz_4x4_o1x4
+UMLSLL_nn_d     11000001 111 ...01 0 .. 000 ...00 1100 .    @azz_4x4_o1x4
+
+USMLALL_nn_s    11000001 101 ....0 0 .. 000 ....0 0010 .    @azz_2x2_o1x4
+USMLALL_nn_s    11000001 101 ...01 0 .. 000 ...00 0010 .    @azz_4x4_o1x4
+
 ### SME2 Multi-vector Indexed
 
 &azx_n          n off rv zn zm idx
@@ -XXX,XX +XXX,XX @@ UVDOT_nx_4h     11000001 1101 .... 1 .. 01 . ...00 11 ...   @azx_4x1_i1_o3
 
 SUVDOT_nx_4b    11000001 0101 .... 1 .. 0 .. ...01 11 ...   @azx_4x1_i2_o3
 USVDOT_nx_4b    11000001 0101 .... 1 .. 0 .. ...01 01 ...   @azx_4x1_i2_o3
+
+SMLAL_nx        11000001 1100 .... . .. 1 .. ..... 00 ...   @azx_1x1_o3x2
+SMLAL_nx        11000001 1101 .... 0 .. 1 .. ....0 00 ...   @azx_2x1_o2x2
+SMLAL_nx        11000001 1101 .... 1 .. 1 .. ...00 00 ...   @azx_4x1_o2x2
+
+SMLSL_nx        11000001 1100 .... . .. 1 .. ..... 01 ...   @azx_1x1_o3x2
+SMLSL_nx        11000001 1101 .... 0 .. 1 .. ....0 01 ...   @azx_2x1_o2x2
+SMLSL_nx        11000001 1101 .... 1 .. 1 .. ...00 01 ...   @azx_4x1_o2x2
+
+UMLAL_nx        11000001 1100 .... . .. 1 .. ..... 10 ...   @azx_1x1_o3x2
+UMLAL_nx        11000001 1101 .... 0 .. 1 .. ....0 10 ...   @azx_2x1_o2x2
+UMLAL_nx        11000001 1101 .... 1 .. 1 .. ...00 10 ...   @azx_4x1_o2x2
+
+UMLSL_nx        11000001 1100 .... . .. 1 .. ..... 11 ...   @azx_1x1_o3x2
+UMLSL_nx        11000001 1101 .... 0 .. 1 .. ....0 11 ...   @azx_2x1_o2x2
+UMLSL_nx        11000001 1101 .... 1 .. 1 .. ...00 11 ...   @azx_4x1_o2x2
+
+%idx4_15_10     15:1 10:3
+%idx4_10_1      10:2 1:2
+%idx3_10_1      10:1 1:2
+
+@azx_1x1_i4_o2  ........ .... zm:4 . .. ... zn:5 ... ..     \
+                &azx_n n=1 rv=%mova_rv off=%off2_x4 idx=%idx4_15_10
+@azx_1x1_i3_o2  ........ .... zm:4 . .. ... zn:5 ... ..     \
+                &azx_n n=1 rv=%mova_rv off=%off2_x4 idx=%idx3_15_10
+@azx_2x1_i4_o1  ........ .... zm:4 . .. ... ..... ... ..     \
+                &azx_n n=2 rv=%mova_rv off=%off1_x4 zn=%zn_ax2 idx=%idx4_10_1
+@azx_2x1_i3_o1  ........ .... zm:4 . .. ... ..... ... ..     \
+                &azx_n n=2 rv=%mova_rv off=%off1_x4 zn=%zn_ax2 idx=%idx3_10_1
+@azx_4x1_i4_o1  ........ .... zm:4 . .. ... ..... ... ..     \
+                &azx_n n=4 rv=%mova_rv off=%off1_x4 zn=%zn_ax4 idx=%idx4_10_1
+@azx_4x1_i3_o1  ........ .... zm:4 . .. ... ..... ... ..     \
+                &azx_n n=4 rv=%mova_rv off=%off1_x4 zn=%zn_ax4 idx=%idx3_10_1
+
+SMLALL_nx_s     11000001 0000 .... . .. ... ..... 000 ..    @azx_1x1_i4_o2
+SMLALL_nx_d     11000001 1000 .... . .. 0.. ..... 000 ..    @azx_1x1_i3_o2
+SMLALL_nx_s     11000001 0001 .... 0 .. 0.. ....0 00 ...    @azx_2x1_i4_o1
+SMLALL_nx_d     11000001 1001 .... 0 .. 00. ....0 00 ...    @azx_2x1_i3_o1
+SMLALL_nx_s     11000001 0001 .... 1 .. 0.. ...00 00 ...    @azx_4x1_i4_o1
+SMLALL_nx_d     11000001 1001 .... 1 .. 00. ...00 00 ...    @azx_4x1_i3_o1
+
+SMLSLL_nx_s     11000001 0000 .... . .. ... ..... 010 ..    @azx_1x1_i4_o2
+SMLSLL_nx_d     11000001 1000 .... . .. 0.. ..... 010 ..    @azx_1x1_i3_o2
+SMLSLL_nx_s     11000001 0001 .... 0 .. 0.. ....0 01 ...    @azx_2x1_i4_o1
+SMLSLL_nx_d     11000001 1001 .... 0 .. 00. ....0 01 ...    @azx_2x1_i3_o1
+SMLSLL_nx_s     11000001 0001 .... 1 .. 0.. ...00 01 ...    @azx_4x1_i4_o1
+SMLSLL_nx_d     11000001 1001 .... 1 .. 00. ...00 01 ...    @azx_4x1_i3_o1
+
+UMLALL_nx_s     11000001 0000 .... . .. ... ..... 100 ..    @azx_1x1_i4_o2
+UMLALL_nx_d     11000001 1000 .... . .. 0.. ..... 100 ..    @azx_1x1_i3_o2
+UMLALL_nx_s     11000001 0001 .... 0 .. 0.. ....0 10 ...    @azx_2x1_i4_o1
+UMLALL_nx_d     11000001 1001 .... 0 .. 00. ....0 10 ...    @azx_2x1_i3_o1
+UMLALL_nx_s     11000001 0001 .... 1 .. 0.. ...00 10 ...    @azx_4x1_i4_o1
+UMLALL_nx_d     11000001 1001 .... 1 .. 00. ...00 10 ...    @azx_4x1_i3_o1
+
+UMLSLL_nx_s     11000001 0000 .... . .. ... ..... 110 ..    @azx_1x1_i4_o2
+UMLSLL_nx_d     11000001 1000 .... . .. 0.. ..... 110 ..    @azx_1x1_i3_o2
+UMLSLL_nx_s     11000001 0001 .... 0 .. 0.. ....0 11 ...    @azx_2x1_i4_o1
+UMLSLL_nx_d     11000001 1001 .... 0 .. 00. ....0 11 ...    @azx_2x1_i3_o1
+UMLSLL_nx_s     11000001 0001 .... 1 .. 0.. ...00 11 ...    @azx_4x1_i4_o1
+UMLSLL_nx_d     11000001 1001 .... 1 .. 00. ...00 11 ...    @azx_4x1_i3_o1
+
+USMLALL_nx_s    11000001 0000 .... . .. ... ..... 001 ..    @azx_1x1_i4_o2
+USMLALL_nx_s    11000001 0001 .... 0 .. 0.. ....1 00 ...    @azx_2x1_i4_o1
+USMLALL_nx_s    11000001 0001 .... 1 .. 0.. ...01 00 ...    @azx_4x1_i4_o1
+
+SUMLALL_nx_s    11000001 0000 .... . .. ... ..... 101 ..    @azx_1x1_i4_o2
+SUMLALL_nx_s    11000001 0001 .... 0 .. 0.. ....1 10 ...    @azx_2x1_i4_o1
+SUMLALL_nx_s    11000001 0001 .... 1 .. 0.. ...01 10 ...    @azx_4x1_i4_o1
diff --git a/target/arm/tcg/sme_helper.c b/target/arm/tcg/sme_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/sme_helper.c
+++ b/target/arm/tcg/sme_helper.c
@@ -XXX,XX +XXX,XX @@ DO_VDOT_IDX(sme2_svdot_idx_2h, int32_t, int16_t, int16_t, H4, H2)
 DO_VDOT_IDX(sme2_uvdot_idx_2h, uint32_t, uint16_t, uint16_t, H4, H2)
 
 #undef DO_VDOT_IDX
+
+#define DO_MLALL(NAME, TYPEW, TYPEN, TYPEM, HW, HN, OP) \
+void HELPER(NAME)(void *vd, void *vn, void *vm, void *va, uint32_t desc) \
+{                                                               \
+    intptr_t elements = simd_oprsz(desc) / sizeof(TYPEW);       \
+    intptr_t sel = extract32(desc, SIMD_DATA_SHIFT, 2);         \
+    TYPEW *d = vd, *a = va; TYPEN *n = vn; TYPEM *m = vm;       \
+    for (intptr_t i = 0; i < elements; ++i) {                   \
+        TYPEW nn = n[HN(i * 4 + sel)];                          \
+        TYPEM mm = m[HN(i * 4 + sel)];                          \
+        d[HW(i)] = a[HW(i)] OP (nn * mm);                       \
+    }                                                           \
+}
+
+DO_MLALL(sme2_smlall_s, int32_t, int8_t, int8_t, H4, H1, +)
+DO_MLALL(sme2_smlall_d, int64_t, int16_t, int16_t, H8, H2, +)
+DO_MLALL(sme2_smlsll_s, int32_t, int8_t, int8_t, H4, H1, -)
+DO_MLALL(sme2_smlsll_d, int64_t, int16_t, int16_t, H8, H2, -)
+
+DO_MLALL(sme2_umlall_s, uint32_t, uint8_t, uint8_t, H4, H1, +)
+DO_MLALL(sme2_umlall_d, uint64_t, uint16_t, uint16_t, H8, H2, +)
+DO_MLALL(sme2_umlsll_s, uint32_t, uint8_t, uint8_t, H4, H1, -)
+DO_MLALL(sme2_umlsll_d, uint64_t, uint16_t, uint16_t, H8, H2, -)
+
+DO_MLALL(sme2_usmlall_s, uint32_t, uint8_t, int8_t, H4, H1, +)
+
+#undef DO_MLALL
+
+#define DO_MLALL_IDX(NAME, TYPEW, TYPEN, TYPEM, HW, HN, OP) \
+void HELPER(NAME)(void *vd, void *vn, void *vm, void *va, uint32_t desc) \
+{                                                               \
+    intptr_t elements = simd_oprsz(desc) / sizeof(TYPEW);       \
+    intptr_t eltspersegment = 16 / sizeof(TYPEW);               \
+    intptr_t sel = extract32(desc, SIMD_DATA_SHIFT, 2);         \
+    intptr_t idx = extract32(desc, SIMD_DATA_SHIFT + 2, 4);     \
+    TYPEW *d = vd, *a = va; TYPEN *n = vn; TYPEM *m = vm;       \
+    for (intptr_t i = 0; i < elements; i += eltspersegment) {   \
+        TYPEW mm = m[HN(i * 4 + idx)];                          \
+        for (intptr_t j = 0; j < eltspersegment; ++j) {         \
+            TYPEN nn = n[HN((i + j) * 4 + sel)];                \
+            d[HW(i + j)] = a[HW(i + j)] OP (nn * mm);           \
+        }                                                       \
+    }                                                           \
+}
+
+DO_MLALL_IDX(sme2_smlall_idx_s, int32_t, int8_t, int8_t, H4, H1, +)
+DO_MLALL_IDX(sme2_smlall_idx_d, int64_t, int16_t, int16_t, H8, H2, +)
+DO_MLALL_IDX(sme2_smlsll_idx_s, int32_t, int8_t, int8_t, H4, H1, -)
+DO_MLALL_IDX(sme2_smlsll_idx_d, int64_t, int16_t, int16_t, H8, H2, -)
+
+DO_MLALL_IDX(sme2_umlall_idx_s, uint32_t, uint8_t, uint8_t, H4, H1, +)
+DO_MLALL_IDX(sme2_umlall_idx_d, uint64_t, uint16_t, uint16_t, H8, H2, +)
+DO_MLALL_IDX(sme2_umlsll_idx_s, uint32_t, uint8_t, uint8_t, H4, H1, -)
+DO_MLALL_IDX(sme2_umlsll_idx_d, uint64_t, uint16_t, uint16_t, H8, H2, -)
+
+DO_MLALL_IDX(sme2_usmlall_idx_s, uint32_t, uint8_t, int8_t, H4, H1, +)
+DO_MLALL_IDX(sme2_sumlall_idx_s, uint32_t, int8_t, uint8_t, H4, H1, +)
+
+#undef DO_MLALL_IDX
diff --git a/target/arm/tcg/translate-sme.c b/target/arm/tcg/translate-sme.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-sme.c
+++ b/target/arm/tcg/translate-sme.c
@@ -XXX,XX +XXX,XX @@ TRANS_FEAT(UVDOT_nx_4h, aa64_sme2, do_vdot_nx, a, gen_helper_sme2_uvdot_idx_4h)
 
 TRANS_FEAT(SUVDOT_nx_4b, aa64_sme2, do_vdot_nx, a, gen_helper_sme2_suvdot_idx_4b)
 TRANS_FEAT(USVDOT_nx_4b, aa64_sme2, do_vdot_nx, a, gen_helper_sme2_usvdot_idx_4b)
+
+static bool do_smlal(DisasContext *s, arg_azz_n *a, bool multi,
+                     gen_helper_gvec_4 *fn)
+{
+    return do_azz_acc(s, a->n, 2, a->rv, a->off, a->zn, a->zm,
+                      0, 0, multi, fn);
+}
+
+TRANS_FEAT(SMLAL_n1, aa64_sme2, do_smlal, a, false, gen_helper_sve2_smlal_zzzw_s)
+TRANS_FEAT(SMLSL_n1, aa64_sme2, do_smlal, a, false, gen_helper_sve2_smlsl_zzzw_s)
+TRANS_FEAT(UMLAL_n1, aa64_sme2, do_smlal, a, false, gen_helper_sve2_umlal_zzzw_s)
+TRANS_FEAT(UMLSL_n1, aa64_sme2, do_smlal, a, false, gen_helper_sve2_umlsl_zzzw_s)
+
+TRANS_FEAT(SMLAL_nn, aa64_sme2, do_smlal, a, true, gen_helper_sve2_smlal_zzzw_s)
+TRANS_FEAT(SMLSL_nn, aa64_sme2, do_smlal, a, true, gen_helper_sve2_smlsl_zzzw_s)
+TRANS_FEAT(UMLAL_nn, aa64_sme2, do_smlal, a, true, gen_helper_sve2_umlal_zzzw_s)
+TRANS_FEAT(UMLSL_nn, aa64_sme2, do_smlal, a, true, gen_helper_sve2_umlsl_zzzw_s)
+
+static bool do_smlal_nx(DisasContext *s, arg_azx_n *a,
+                         gen_helper_gvec_4 *fn)
+{
+    return do_azz_acc(s, a->n, 2, a->rv, a->off, a->zn, a->zm,
+                      a->idx << 1, 0, false, fn);
+}
+
+TRANS_FEAT(SMLAL_nx, aa64_sme2, do_smlal_nx, a, gen_helper_sve2_smlal_idx_s)
+TRANS_FEAT(SMLSL_nx, aa64_sme2, do_smlal_nx, a, gen_helper_sve2_smlsl_idx_s)
+TRANS_FEAT(UMLAL_nx, aa64_sme2, do_smlal_nx, a, gen_helper_sve2_umlal_idx_s)
+TRANS_FEAT(UMLSL_nx, aa64_sme2, do_smlal_nx, a, gen_helper_sve2_umlsl_idx_s)
+
+static bool do_smlall(DisasContext *s, arg_azz_n *a, bool multi,
+                     gen_helper_gvec_4 *fn)
+{
+    return do_azz_acc(s, a->n, 4, a->rv, a->off, a->zn, a->zm,
+                      0, 0, multi, fn);
+}
+
+static void gen_helper_sme2_sumlall_s(TCGv_ptr d, TCGv_ptr n, TCGv_ptr m,
+                                      TCGv_ptr a, TCGv_i32 desc)
+{
+    gen_helper_sme2_usmlall_s(d, m, n, a, desc);
+}
+
+TRANS_FEAT(SMLALL_n1_s, aa64_sme2, do_smlall, a, false, gen_helper_sme2_smlall_s)
+TRANS_FEAT(SMLSLL_n1_s, aa64_sme2, do_smlall, a, false, gen_helper_sme2_smlsll_s)
+TRANS_FEAT(UMLALL_n1_s, aa64_sme2, do_smlall, a, false, gen_helper_sme2_umlall_s)
+TRANS_FEAT(UMLSLL_n1_s, aa64_sme2, do_smlall, a, false, gen_helper_sme2_umlsll_s)
+TRANS_FEAT(USMLALL_n1_s, aa64_sme2, do_smlall, a, false, gen_helper_sme2_usmlall_s)
+TRANS_FEAT(SUMLALL_n1_s, aa64_sme2, do_smlall, a, false, gen_helper_sme2_sumlall_s)
+
+TRANS_FEAT(SMLALL_n1_d, aa64_sme2_i16i64, do_smlall, a, false, gen_helper_sme2_smlall_d)
+TRANS_FEAT(SMLSLL_n1_d, aa64_sme2_i16i64, do_smlall, a, false, gen_helper_sme2_smlsll_d)
+TRANS_FEAT(UMLALL_n1_d, aa64_sme2_i16i64, do_smlall, a, false, gen_helper_sme2_umlall_d)
+TRANS_FEAT(UMLSLL_n1_d, aa64_sme2_i16i64, do_smlall, a, false, gen_helper_sme2_umlsll_d)
+
+TRANS_FEAT(SMLALL_nn_s, aa64_sme2, do_smlall, a, true, gen_helper_sme2_smlall_s)
+TRANS_FEAT(SMLSLL_nn_s, aa64_sme2, do_smlall, a, true, gen_helper_sme2_smlsll_s)
+TRANS_FEAT(UMLALL_nn_s, aa64_sme2, do_smlall, a, true, gen_helper_sme2_umlall_s)
+TRANS_FEAT(UMLSLL_nn_s, aa64_sme2, do_smlall, a, true, gen_helper_sme2_umlsll_s)
+TRANS_FEAT(USMLALL_nn_s, aa64_sme2, do_smlall, a, true, gen_helper_sme2_usmlall_s)
+
+TRANS_FEAT(SMLALL_nn_d, aa64_sme2_i16i64, do_smlall, a, true, gen_helper_sme2_smlall_d)
+TRANS_FEAT(SMLSLL_nn_d, aa64_sme2_i16i64, do_smlall, a, true, gen_helper_sme2_smlsll_d)
+TRANS_FEAT(UMLALL_nn_d, aa64_sme2_i16i64, do_smlall, a, true, gen_helper_sme2_umlall_d)
+TRANS_FEAT(UMLSLL_nn_d, aa64_sme2_i16i64, do_smlall, a, true, gen_helper_sme2_umlsll_d)
+
+static bool do_smlall_nx(DisasContext *s, arg_azx_n *a,
+                        gen_helper_gvec_4 *fn)
+{
+    return do_azz_acc(s, a->n, 4, a->rv, a->off, a->zn, a->zm,
+                      a->idx << 2, 0, false, fn);
+}
+
+TRANS_FEAT(SMLALL_nx_s, aa64_sme2, do_smlall_nx, a, gen_helper_sme2_smlall_idx_s)
+TRANS_FEAT(SMLSLL_nx_s, aa64_sme2, do_smlall_nx, a, gen_helper_sme2_smlsll_idx_s)
+TRANS_FEAT(UMLALL_nx_s, aa64_sme2, do_smlall_nx, a, gen_helper_sme2_umlall_idx_s)
+TRANS_FEAT(UMLSLL_nx_s, aa64_sme2, do_smlall_nx, a, gen_helper_sme2_umlsll_idx_s)
+TRANS_FEAT(USMLALL_nx_s, aa64_sme2, do_smlall_nx, a, gen_helper_sme2_usmlall_idx_s)
+TRANS_FEAT(SUMLALL_nx_s, aa64_sme2, do_smlall_nx, a, gen_helper_sme2_sumlall_idx_s)
+
+TRANS_FEAT(SMLALL_nx_d, aa64_sme2_i16i64, do_smlall_nx, a, gen_helper_sme2_smlall_idx_d)
+TRANS_FEAT(SMLSLL_nx_d, aa64_sme2_i16i64, do_smlall_nx, a, gen_helper_sme2_smlsll_idx_d)
+TRANS_FEAT(UMLALL_nx_d, aa64_sme2_i16i64, do_smlall_nx, a, gen_helper_sme2_umlall_idx_d)
+TRANS_FEAT(UMLSLL_nx_d, aa64_sme2_i16i64, do_smlall_nx, a, gen_helper_sme2_umlsll_idx_d)
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Emphasize the non-fused nature of these multiply-add.
Matches other helpers such as gvec_rsqrts_nf_[hs].

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-48-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/helper.h         | 8 ++++----
 target/arm/tcg/translate-neon.c | 4 ++--
 target/arm/tcg/vec_helper.c     | 8 ++++----
 3 files changed, 10 insertions(+), 10 deletions(-)

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-49-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/sme.decode      | 48 +++++++++++++++++
 target/arm/tcg/translate-sme.c | 95 ++++++++++++++++++++++++++++++++++
 2 files changed, 143 insertions(+)

diff --git a/target/arm/tcg/sme.decode b/target/arm/tcg/sme.decode
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/sme.decode
+++ b/target/arm/tcg/sme.decode
@@ -XXX,XX +XXX,XX @@ USMLALL_n1_s    11000001 001 1 .... 0 .. 000 ..... 0010 .   @azz_nx1_o1x4 n=4
 SUMLALL_n1_s    11000001 001 0 .... 0 .. 000 ..... 1010 .   @azz_nx1_o1x4 n=2
 SUMLALL_n1_s    11000001 001 1 .... 0 .. 000 ..... 1010 .   @azz_nx1_o1x4 n=4
 
+FMLA_n1_h       11000001 001 0 .... 0 .. 111 ..... 00 ...   @azz_nx1_o3 n=2
+FMLA_n1_s       11000001 001 0 .... 0 .. 110 ..... 00 ...   @azz_nx1_o3 n=2
+FMLA_n1_d       11000001 011 0 .... 0 .. 110 ..... 00 ...   @azz_nx1_o3 n=2
+FMLA_n1_h       11000001 001 1 .... 0 .. 111 ..... 00 ...   @azz_nx1_o3 n=4
+FMLA_n1_s       11000001 001 1 .... 0 .. 110 ..... 00 ...   @azz_nx1_o3 n=4
+FMLA_n1_d       11000001 011 1 .... 0 .. 110 ..... 00 ...   @azz_nx1_o3 n=4
+
+FMLS_n1_h       11000001 001 0 .... 0 .. 111 ..... 01 ...   @azz_nx1_o3 n=2
+FMLS_n1_s       11000001 001 0 .... 0 .. 110 ..... 01 ...   @azz_nx1_o3 n=2
+FMLS_n1_d       11000001 011 0 .... 0 .. 110 ..... 01 ...   @azz_nx1_o3 n=2
+FMLS_n1_h       11000001 001 1 .... 0 .. 111 ..... 01 ...   @azz_nx1_o3 n=4
+FMLS_n1_s       11000001 001 1 .... 0 .. 110 ..... 01 ...   @azz_nx1_o3 n=4
+FMLS_n1_d       11000001 011 1 .... 0 .. 110 ..... 01 ...   @azz_nx1_o3 n=4
+
 ### SME2 Multi-vector Multiple Array Vectors
 
 %zn_ax2         6:4 !function=times_2
@@ -XXX,XX +XXX,XX @@ UMLSLL_nn_d     11000001 111 ...01 0 .. 000 ...00 1100 .    @azz_4x4_o1x4
 USMLALL_nn_s    11000001 101 ....0 0 .. 000 ....0 0010 .    @azz_2x2_o1x4
 USMLALL_nn_s    11000001 101 ...01 0 .. 000 ...00 0010 .    @azz_4x4_o1x4
 
+FMLA_nn_h       11000001 101 ....0 0 .. 100 ....0 01 ...    @azz_2x2_o3
+FMLA_nn_s       11000001 101 ....0 0 .. 110 ....0 00 ...    @azz_2x2_o3
+FMLA_nn_d       11000001 111 ....0 0 .. 110 ....0 00 ...    @azz_2x2_o3
+FMLA_nn_h       11000001 101 ...01 0 .. 100 ...00 01 ...    @azz_4x4_o3
+FMLA_nn_s       11000001 101 ...01 0 .. 110 ...00 00 ...    @azz_4x4_o3
+FMLA_nn_d       11000001 111 ...01 0 .. 110 ...00 00 ...    @azz_4x4_o3
+
+FMLS_nn_h       11000001 101 ....0 0 .. 100 ....0 11 ...    @azz_2x2_o3
+FMLS_nn_s       11000001 101 ....0 0 .. 110 ....0 01 ...    @azz_2x2_o3
+FMLS_nn_d       11000001 111 ....0 0 .. 110 ....0 01 ...    @azz_2x2_o3
+FMLS_nn_h       11000001 101 ...01 0 .. 100 ...00 11 ...    @azz_4x4_o3
+FMLS_nn_s       11000001 101 ...01 0 .. 110 ...00 01 ...    @azz_4x4_o3
+FMLS_nn_d       11000001 111 ...01 0 .. 110 ...00 01 ...    @azz_4x4_o3
+
 ### SME2 Multi-vector Indexed
 
 &azx_n          n off rv zn zm idx
@@ -XXX,XX +XXX,XX @@ USMLALL_nx_s    11000001 0001 .... 1 .. 0.. ...01 00 ...    @azx_4x1_i4_o1
 SUMLALL_nx_s    11000001 0000 .... . .. ... ..... 101 ..    @azx_1x1_i4_o2
 SUMLALL_nx_s    11000001 0001 .... 0 .. 0.. ....1 10 ...    @azx_2x1_i4_o1
 SUMLALL_nx_s    11000001 0001 .... 1 .. 0.. ...01 10 ...    @azx_4x1_i4_o1
+
+%idx3_10_3      10:2 3:1
+@azx_2x1_i3_o3  ........ .... zm:4 . .. ... ..... .. off:3  \
+                &azx_n n=2 rv=%mova_rv zn=%zn_ax2 idx=%idx3_10_3
+@azx_4x1_i3_o3  ........ .... zm:4 . .. ... ..... .. off:3  \
+                &azx_n n=4 rv=%mova_rv zn=%zn_ax4 idx=%idx3_10_3
+
+FMLA_nx_h       11000001 0001 .... 0 .. 1.. ....0 0 ....    @azx_2x1_i3_o3
+FMLA_nx_s       11000001 0101 .... 0 .. 0.. ....0 00 ...    @azx_2x1_i2_o3
+FMLA_nx_d       11000001 1101 .... 0 .. 00. ....0 00 ...    @azx_2x1_i1_o3
+FMLA_nx_h       11000001 0001 .... 1 .. 1.. ...00 0 ....    @azx_4x1_i3_o3
+FMLA_nx_s       11000001 0101 .... 1 .. 0.. ...00 00 ...    @azx_4x1_i2_o3
+FMLA_nx_d       11000001 1101 .... 1 .. 00. ...00 00 ...    @azx_4x1_i1_o3
+
+FMLS_nx_h       11000001 0001 .... 0 .. 1.. ....0 1 ....    @azx_2x1_i3_o3
+FMLS_nx_s       11000001 0101 .... 0 .. 0.. ....0 10 ...    @azx_2x1_i2_o3
+FMLS_nx_d       11000001 1101 .... 0 .. 00. ....0 10 ...    @azx_2x1_i1_o3
+FMLS_nx_h       11000001 0001 .... 1 .. 1.. ...00 1 ....    @azx_4x1_i3_o3
+FMLS_nx_s       11000001 0101 .... 1 .. 0.. ...00 10 ...    @azx_4x1_i2_o3
+FMLS_nx_d       11000001 1101 .... 1 .. 00. ...00 10 ...    @azx_4x1_i1_o3
diff --git a/target/arm/tcg/translate-sme.c b/target/arm/tcg/translate-sme.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-sme.c
+++ b/target/arm/tcg/translate-sme.c
@@ -XXX,XX +XXX,XX @@ TRANS_FEAT(SUB_azz_nn_d, aa64_sme2_i16i64, do_azz_nn, a, MO_64, tcg_gen_gvec_sub
  */
 #define FPST_ENV  -1
 
+static bool do_azz_fp(DisasContext *s, int nreg, int nsel,
+                      int rv, int off, int zn, int zm,
+                      int data, int shsel, bool multi, int fpst,
+                      gen_helper_gvec_3_ptr *fn)
+{
+    if (sme_smza_enabled_check(s)) {
+        int svl = streaming_vec_reg_size(s);
+        int vstride = svl / nreg;
+        TCGv_ptr t_za = get_zarray(s, rv, off, nreg, nsel);
+        TCGv_ptr t, ptr;
+
+        if (fpst >= 0) {
+            ptr = fpstatus_ptr(fpst);
+        } else {
+            ptr = tcg_env;
+        }
+        t = tcg_temp_new_ptr();
+
+        for (int r = 0; r < nreg; ++r) {
+            TCGv_ptr t_zn = vec_full_reg_ptr(s, zn);
+            TCGv_ptr t_zm = vec_full_reg_ptr(s, zm);
+
+            for (int i = 0; i < nsel; ++i) {
+                int o_za = (r * vstride + i) * sizeof(ARMVectorReg);
+                int desc = simd_desc(svl, svl, data | (i << shsel));
+
+                tcg_gen_addi_ptr(t, t_za, o_za);
+                fn(t, t_zn, t_zm, ptr, tcg_constant_i32(desc));
+            }
+
+            /*
+             * For multiple-and-single vectors, Zn may wrap.
+             * For multiple vectors, both Zn and Zm are aligned.
+             */
+            zn = (zn + 1) % 32;
+            zm += multi;
+        }
+    }
+    return true;
+}
+
 static bool do_azz_acc_fp(DisasContext *s, int nreg, int nsel,
                           int rv, int off, int zn, int zm,
                           int data, int shsel, bool multi, int fpst,
@@ -XXX,XX +XXX,XX @@ static bool do_vdot(DisasContext *s, arg_azx_n *a, gen_helper_gvec_4_ptr *fn)
 TRANS_FEAT(FVDOT, aa64_sme, do_vdot, a, gen_helper_sme2_fvdot_idx_h)
 TRANS_FEAT(BFVDOT, aa64_sme, do_vdot, a, gen_helper_sme2_bfvdot_idx)
 
+static bool do_fmla(DisasContext *s, arg_azz_n *a, bool multi,
+                    ARMFPStatusFlavour fpst, gen_helper_gvec_3_ptr *fn)
+{
+    return do_azz_fp(s, a->n, 1, a->rv, a->off, a->zn, a->zm,
+                     0, 0, multi, fpst, fn);
+}
+
+TRANS_FEAT(FMLA_n1_h, aa64_sme_f16f16, do_fmla, a, false, FPST_ZA_F16,
+           gen_helper_gvec_vfma_h)
+TRANS_FEAT(FMLS_n1_h, aa64_sme_f16f16, do_fmla, a, false, FPST_ZA_F16,
+           s->fpcr_ah ? gen_helper_gvec_ah_vfms_h : gen_helper_gvec_vfms_h)
+TRANS_FEAT(FMLA_nn_h, aa64_sme_f16f16, do_fmla, a, true, FPST_ZA_F16,
+           gen_helper_gvec_vfma_h)
+TRANS_FEAT(FMLS_nn_h, aa64_sme_f16f16, do_fmla, a, true, FPST_ZA_F16,
+           s->fpcr_ah ? gen_helper_gvec_ah_vfms_h : gen_helper_gvec_vfms_h)
+
+TRANS_FEAT(FMLA_n1_s, aa64_sme2, do_fmla, a, false, FPST_ZA,
+           gen_helper_gvec_vfma_s)
+TRANS_FEAT(FMLS_n1_s, aa64_sme2, do_fmla, a, false, FPST_ZA,
+           s->fpcr_ah ? gen_helper_gvec_ah_vfms_s : gen_helper_gvec_vfms_s)
+TRANS_FEAT(FMLA_nn_s, aa64_sme2, do_fmla, a, true, FPST_ZA,
+           gen_helper_gvec_vfma_s)
+TRANS_FEAT(FMLS_nn_s, aa64_sme2, do_fmla, a, true, FPST_ZA,
+           s->fpcr_ah ? gen_helper_gvec_ah_vfms_s : gen_helper_gvec_vfms_s)
+
+TRANS_FEAT(FMLA_n1_d, aa64_sme2_f64f64, do_fmla, a, false, FPST_ZA,
+           gen_helper_gvec_vfma_d)
+TRANS_FEAT(FMLS_n1_d, aa64_sme2_f64f64, do_fmla, a, false, FPST_ZA,
+           s->fpcr_ah ? gen_helper_gvec_ah_vfms_d : gen_helper_gvec_vfms_d)
+TRANS_FEAT(FMLA_nn_d, aa64_sme2_f64f64, do_fmla, a, true, FPST_ZA,
+           gen_helper_gvec_vfma_d)
+TRANS_FEAT(FMLS_nn_d, aa64_sme2_f64f64, do_fmla, a, true, FPST_ZA,
+           s->fpcr_ah ? gen_helper_gvec_ah_vfms_d : gen_helper_gvec_vfms_d)
+
+static bool do_fmla_nx(DisasContext *s, arg_azx_n *a,
+                       ARMFPStatusFlavour fpst, gen_helper_gvec_4_ptr *fn)
+{
+    return do_azz_acc_fp(s, a->n, 1, a->rv, a->off, a->zn, a->zm,
+                         a->idx, 0, false, fpst, fn);
+}
+
+TRANS_FEAT(FMLA_nx_h, aa64_sme_f16f16, do_fmla_nx, a, FPST_ZA_F16,
+           gen_helper_gvec_fmla_idx_h)
+TRANS_FEAT(FMLS_nx_h, aa64_sme_f16f16, do_fmla_nx, a, FPST_ZA_F16,
+           s->fpcr_ah ? gen_helper_gvec_ah_fmls_idx_h : gen_helper_gvec_fmls_idx_h)
+TRANS_FEAT(FMLA_nx_s, aa64_sme2, do_fmla_nx, a, FPST_ZA,
+           gen_helper_gvec_fmla_idx_s)
+TRANS_FEAT(FMLS_nx_s, aa64_sme2, do_fmla_nx, a, FPST_ZA,
+           s->fpcr_ah ? gen_helper_gvec_ah_fmls_idx_s : gen_helper_gvec_fmls_idx_s)
+TRANS_FEAT(FMLA_nx_d, aa64_sme2_f64f64, do_fmla_nx, a, FPST_ZA,
+           gen_helper_gvec_fmla_idx_d)
+TRANS_FEAT(FMLS_nx_d, aa64_sme2_f64f64, do_fmla_nx, a, FPST_ZA,
+           s->fpcr_ah ? gen_helper_gvec_ah_fmls_idx_d : gen_helper_gvec_fmls_idx_d)
+
 /*
  * Expand array multi-vector single (n1), array multi-vector (nn),
  * and array multi-vector indexed (nx), for integer accumulate.
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-50-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/helper.h        |  9 +++++++++
 target/arm/tcg/sme.decode      | 18 ++++++++++++++++++
 target/arm/tcg/translate-sme.c | 14 ++++++++++++++
 target/arm/tcg/vec_helper.c    | 26 ++++++++++++++++++++++++++
 4 files changed, 67 insertions(+)

diff --git a/target/arm/tcg/helper.h b/target/arm/tcg/helper.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/helper.h
+++ b/target/arm/tcg/helper.h
@@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(gvec_fmls_nf_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, fpst, i
 DEF_HELPER_FLAGS_5(gvec_vfma_h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, fpst, i32)
 DEF_HELPER_FLAGS_5(gvec_vfma_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, fpst, i32)
 DEF_HELPER_FLAGS_5(gvec_vfma_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, fpst, i32)
+DEF_HELPER_FLAGS_5(gvec_bfmla, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, fpst, i32)
 
 DEF_HELPER_FLAGS_5(gvec_vfms_h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, fpst, i32)
 DEF_HELPER_FLAGS_5(gvec_vfms_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, fpst, i32)
 DEF_HELPER_FLAGS_5(gvec_vfms_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, fpst, i32)
+DEF_HELPER_FLAGS_5(gvec_bfmls, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, fpst, i32)
 
 DEF_HELPER_FLAGS_5(gvec_ah_vfms_h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, fpst, i32)
 DEF_HELPER_FLAGS_5(gvec_ah_vfms_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, fpst, i32)
 DEF_HELPER_FLAGS_5(gvec_ah_vfms_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, fpst, i32)
+DEF_HELPER_FLAGS_5(gvec_ah_bfmls, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, fpst, i32)
 
 DEF_HELPER_FLAGS_5(gvec_ftsmul_h, TCG_CALL_NO_RWG,
                    void, ptr, ptr, ptr, fpst, i32)
@@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_6(gvec_fmla_idx_s, TCG_CALL_NO_RWG,
                    void, ptr, ptr, ptr, ptr, fpst, i32)
 DEF_HELPER_FLAGS_6(gvec_fmla_idx_d, TCG_CALL_NO_RWG,
                    void, ptr, ptr, ptr, ptr, fpst, i32)
+DEF_HELPER_FLAGS_6(gvec_bfmla_idx, TCG_CALL_NO_RWG,
+                   void, ptr, ptr, ptr, ptr, fpst, i32)
 
 DEF_HELPER_FLAGS_6(gvec_fmls_idx_h, TCG_CALL_NO_RWG,
                    void, ptr, ptr, ptr, ptr, fpst, i32)
@@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_6(gvec_fmls_idx_s, TCG_CALL_NO_RWG,
                    void, ptr, ptr, ptr, ptr, fpst, i32)
 DEF_HELPER_FLAGS_6(gvec_fmls_idx_d, TCG_CALL_NO_RWG,
                    void, ptr, ptr, ptr, ptr, fpst, i32)
+DEF_HELPER_FLAGS_6(gvec_bfmls_idx, TCG_CALL_NO_RWG,
+                   void, ptr, ptr, ptr, ptr, fpst, i32)
 
 DEF_HELPER_FLAGS_6(gvec_ah_fmls_idx_h, TCG_CALL_NO_RWG,
                    void, ptr, ptr, ptr, ptr, fpst, i32)
@@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_6(gvec_ah_fmls_idx_s, TCG_CALL_NO_RWG,
                    void, ptr, ptr, ptr, ptr, fpst, i32)
 DEF_HELPER_FLAGS_6(gvec_ah_fmls_idx_d, TCG_CALL_NO_RWG,
                    void, ptr, ptr, ptr, ptr, fpst, i32)
+DEF_HELPER_FLAGS_6(gvec_ah_bfmls_idx, TCG_CALL_NO_RWG,
+                   void, ptr, ptr, ptr, ptr, fpst, i32)
 
 DEF_HELPER_FLAGS_5(gvec_uqadd_b, TCG_CALL_NO_RWG,
                    void, ptr, ptr, ptr, ptr, i32)
diff --git a/target/arm/tcg/sme.decode b/target/arm/tcg/sme.decode
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/sme.decode
+++ b/target/arm/tcg/sme.decode
@@ -XXX,XX +XXX,XX @@ USMLALL_n1_s    11000001 001 1 .... 0 .. 000 ..... 0010 .   @azz_nx1_o1x4 n=4
 SUMLALL_n1_s    11000001 001 0 .... 0 .. 000 ..... 1010 .   @azz_nx1_o1x4 n=2
 SUMLALL_n1_s    11000001 001 1 .... 0 .. 000 ..... 1010 .   @azz_nx1_o1x4 n=4
 
+BFMLA_n1        11000001 011 0 .... 0 .. 111 ..... 00 ...   @azz_nx1_o3 n=2
 FMLA_n1_h       11000001 001 0 .... 0 .. 111 ..... 00 ...   @azz_nx1_o3 n=2
 FMLA_n1_s       11000001 001 0 .... 0 .. 110 ..... 00 ...   @azz_nx1_o3 n=2
 FMLA_n1_d       11000001 011 0 .... 0 .. 110 ..... 00 ...   @azz_nx1_o3 n=2
+
+BFMLA_n1        11000001 011 1 .... 0 .. 111 ..... 00 ...   @azz_nx1_o3 n=4
 FMLA_n1_h       11000001 001 1 .... 0 .. 111 ..... 00 ...   @azz_nx1_o3 n=4
 FMLA_n1_s       11000001 001 1 .... 0 .. 110 ..... 00 ...   @azz_nx1_o3 n=4
 FMLA_n1_d       11000001 011 1 .... 0 .. 110 ..... 00 ...   @azz_nx1_o3 n=4
 
+BFMLS_n1        11000001 011 0 .... 0 .. 111 ..... 01 ...   @azz_nx1_o3 n=2
 FMLS_n1_h       11000001 001 0 .... 0 .. 111 ..... 01 ...   @azz_nx1_o3 n=2
 FMLS_n1_s       11000001 001 0 .... 0 .. 110 ..... 01 ...   @azz_nx1_o3 n=2
 FMLS_n1_d       11000001 011 0 .... 0 .. 110 ..... 01 ...   @azz_nx1_o3 n=2
+
+BFMLS_n1        11000001 011 1 .... 0 .. 111 ..... 01 ...   @azz_nx1_o3 n=4
 FMLS_n1_h       11000001 001 1 .... 0 .. 111 ..... 01 ...   @azz_nx1_o3 n=4
 FMLS_n1_s       11000001 001 1 .... 0 .. 110 ..... 01 ...   @azz_nx1_o3 n=4
 FMLS_n1_d       11000001 011 1 .... 0 .. 110 ..... 01 ...   @azz_nx1_o3 n=4
@@ -XXX,XX +XXX,XX @@ UMLSLL_nn_d     11000001 111 ...01 0 .. 000 ...00 1100 .    @azz_4x4_o1x4
 USMLALL_nn_s    11000001 101 ....0 0 .. 000 ....0 0010 .    @azz_2x2_o1x4
 USMLALL_nn_s    11000001 101 ...01 0 .. 000 ...00 0010 .    @azz_4x4_o1x4
 
+BFMLA_nn        11000001 111 ....0 0 .. 100 ....0 01 ...    @azz_2x2_o3
 FMLA_nn_h       11000001 101 ....0 0 .. 100 ....0 01 ...    @azz_2x2_o3
 FMLA_nn_s       11000001 101 ....0 0 .. 110 ....0 00 ...    @azz_2x2_o3
 FMLA_nn_d       11000001 111 ....0 0 .. 110 ....0 00 ...    @azz_2x2_o3
+
+BFMLA_nn        11000001 111 ...01 0 .. 100 ...00 01 ...    @azz_4x4_o3
 FMLA_nn_h       11000001 101 ...01 0 .. 100 ...00 01 ...    @azz_4x4_o3
 FMLA_nn_s       11000001 101 ...01 0 .. 110 ...00 00 ...    @azz_4x4_o3
 FMLA_nn_d       11000001 111 ...01 0 .. 110 ...00 00 ...    @azz_4x4_o3
 
+BFMLS_nn        11000001 111 ....0 0 .. 100 ....0 11 ...    @azz_2x2_o3
 FMLS_nn_h       11000001 101 ....0 0 .. 100 ....0 11 ...    @azz_2x2_o3
 FMLS_nn_s       11000001 101 ....0 0 .. 110 ....0 01 ...    @azz_2x2_o3
 FMLS_nn_d       11000001 111 ....0 0 .. 110 ....0 01 ...    @azz_2x2_o3
+
+BFMLS_nn        11000001 111 ...01 0 .. 100 ...00 11 ...    @azz_4x4_o3
 FMLS_nn_h       11000001 101 ...01 0 .. 100 ...00 11 ...    @azz_4x4_o3
 FMLS_nn_s       11000001 101 ...01 0 .. 110 ...00 01 ...    @azz_4x4_o3
 FMLS_nn_d       11000001 111 ...01 0 .. 110 ...00 01 ...    @azz_4x4_o3
@@ -XXX,XX +XXX,XX @@ SUMLALL_nx_s    11000001 0001 .... 1 .. 0.. ...01 10 ...    @azx_4x1_i4_o1
 @azx_4x1_i3_o3  ........ .... zm:4 . .. ... ..... .. off:3  \
                 &azx_n n=4 rv=%mova_rv zn=%zn_ax4 idx=%idx3_10_3
 
+BFMLA_nx        11000001 0001 .... 0 .. 1.. ....1 0 ....    @azx_2x1_i3_o3
 FMLA_nx_h       11000001 0001 .... 0 .. 1.. ....0 0 ....    @azx_2x1_i3_o3
 FMLA_nx_s       11000001 0101 .... 0 .. 0.. ....0 00 ...    @azx_2x1_i2_o3
 FMLA_nx_d       11000001 1101 .... 0 .. 00. ....0 00 ...    @azx_2x1_i1_o3
+
+BFMLA_nx        11000001 0001 .... 1 .. 1.. ...01 0 ....    @azx_4x1_i3_o3
 FMLA_nx_h       11000001 0001 .... 1 .. 1.. ...00 0 ....    @azx_4x1_i3_o3
 FMLA_nx_s       11000001 0101 .... 1 .. 0.. ...00 00 ...    @azx_4x1_i2_o3
 FMLA_nx_d       11000001 1101 .... 1 .. 00. ...00 00 ...    @azx_4x1_i1_o3
 
+BFMLS_nx        11000001 0001 .... 0 .. 1.. ....1 1 ....    @azx_2x1_i3_o3
 FMLS_nx_h       11000001 0001 .... 0 .. 1.. ....0 1 ....    @azx_2x1_i3_o3
 FMLS_nx_s       11000001 0101 .... 0 .. 0.. ....0 10 ...    @azx_2x1_i2_o3
 FMLS_nx_d       11000001 1101 .... 0 .. 00. ....0 10 ...    @azx_2x1_i1_o3
+
+BFMLS_nx        11000001 0001 .... 1 .. 1.. ...01 1 ....    @azx_4x1_i3_o3
 FMLS_nx_h       11000001 0001 .... 1 .. 1.. ...00 1 ....    @azx_4x1_i3_o3
 FMLS_nx_s       11000001 0101 .... 1 .. 0.. ...00 10 ...    @azx_4x1_i2_o3
 FMLS_nx_d       11000001 1101 .... 1 .. 00. ...00 10 ...    @azx_4x1_i1_o3
diff --git a/target/arm/tcg/translate-sme.c b/target/arm/tcg/translate-sme.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-sme.c
+++ b/target/arm/tcg/translate-sme.c
@@ -XXX,XX +XXX,XX @@ TRANS_FEAT(FMLA_nn_d, aa64_sme2_f64f64, do_fmla, a, true, FPST_ZA,
 TRANS_FEAT(FMLS_nn_d, aa64_sme2_f64f64, do_fmla, a, true, FPST_ZA,
            s->fpcr_ah ? gen_helper_gvec_ah_vfms_d : gen_helper_gvec_vfms_d)
 
+TRANS_FEAT(BFMLA_n1, aa64_sme_b16b16, do_fmla, a, false, FPST_ZA,
+           gen_helper_gvec_bfmla)
+TRANS_FEAT(BFMLS_n1, aa64_sme_b16b16, do_fmla, a, false, FPST_ZA,
+           s->fpcr_ah ? gen_helper_gvec_ah_bfmls : gen_helper_gvec_bfmls)
+TRANS_FEAT(BFMLA_nn, aa64_sme_b16b16, do_fmla, a, true, FPST_ZA,
+           gen_helper_gvec_bfmla)
+TRANS_FEAT(BFMLS_nn, aa64_sme_b16b16, do_fmla, a, true, FPST_ZA,
+           s->fpcr_ah ? gen_helper_gvec_ah_bfmls : gen_helper_gvec_bfmls)
+
 static bool do_fmla_nx(DisasContext *s, arg_azx_n *a,
                        ARMFPStatusFlavour fpst, gen_helper_gvec_4_ptr *fn)
 {
@@ -XXX,XX +XXX,XX @@ TRANS_FEAT(FMLA_nx_d, aa64_sme2_f64f64, do_fmla_nx, a, FPST_ZA,
 TRANS_FEAT(FMLS_nx_d, aa64_sme2_f64f64, do_fmla_nx, a, FPST_ZA,
            s->fpcr_ah ? gen_helper_gvec_ah_fmls_idx_d : gen_helper_gvec_fmls_idx_d)
 
+TRANS_FEAT(BFMLA_nx, aa64_sme_b16b16, do_fmla_nx, a, FPST_ZA,
+           gen_helper_gvec_bfmla_idx)
+TRANS_FEAT(BFMLS_nx, aa64_sme_b16b16, do_fmla_nx, a, FPST_ZA,
+           s->fpcr_ah ? gen_helper_gvec_ah_bfmls_idx : gen_helper_gvec_bfmls_idx)
+
 /*
  * Expand array multi-vector single (n1), array multi-vector (nn),
  * and array multi-vector indexed (nx), for integer accumulate.
diff --git a/target/arm/tcg/vec_helper.c b/target/arm/tcg/vec_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/vec_helper.c
+++ b/target/arm/tcg/vec_helper.c
@@ -XXX,XX +XXX,XX @@ static float16 float16_muladd_f(float16 dest, float16 op1, float16 op2,
     return float16_muladd(op1, op2, dest, 0, stat);
 }
 
+static bfloat16 bfloat16_muladd_f(bfloat16 dest, bfloat16 op1, bfloat16 op2,
+                                  float_status *stat)
+{
+    return bfloat16_muladd(op1, op2, dest, 0, stat);
+}
+
 static float32 float32_muladd_f(float32 dest, float32 op1, float32 op2,
                                  float_status *stat)
 {
@@ -XXX,XX +XXX,XX @@ static float16 float16_mulsub_f(float16 dest, float16 op1, float16 op2,
     return float16_muladd(float16_chs(op1), op2, dest, 0, stat);
 }
 
+static bfloat16 bfloat16_mulsub_f(bfloat16 dest, bfloat16 op1, bfloat16 op2,
+                                  float_status *stat)
+{
+    return bfloat16_muladd(bfloat16_chs(op1), op2, dest, 0, stat);
+}
+
 static float32 float32_mulsub_f(float32 dest, float32 op1, float32 op2,
                                  float_status *stat)
 {
@@ -XXX,XX +XXX,XX @@ static float16 float16_ah_mulsub_f(float16 dest, float16 op1, float16 op2,
     return float16_muladd(op1, op2, dest, float_muladd_negate_product, stat);
 }
 
+static bfloat16 bfloat16_ah_mulsub_f(bfloat16 dest, bfloat16 op1, bfloat16 op2,
+                                     float_status *stat)
+{
+    return bfloat16_muladd(op1, op2, dest, float_muladd_negate_product, stat);
+}
+
 static float32 float32_ah_mulsub_f(float32 dest, float32 op1, float32 op2,
                                  float_status *stat)
 {
@@ -XXX,XX +XXX,XX @@ DO_MULADD(gvec_fmls_nf_s, float32_mulsub_nf, float32)
 DO_MULADD(gvec_vfma_h, float16_muladd_f, float16)
 DO_MULADD(gvec_vfma_s, float32_muladd_f, float32)
 DO_MULADD(gvec_vfma_d, float64_muladd_f, float64)
+DO_MULADD(gvec_bfmla, bfloat16_muladd_f, bfloat16)
 
 DO_MULADD(gvec_vfms_h, float16_mulsub_f, float16)
 DO_MULADD(gvec_vfms_s, float32_mulsub_f, float32)
 DO_MULADD(gvec_vfms_d, float64_mulsub_f, float64)
+DO_MULADD(gvec_bfmls, bfloat16_mulsub_f, bfloat16)
 
 DO_MULADD(gvec_ah_vfms_h, float16_ah_mulsub_f, float16)
 DO_MULADD(gvec_ah_vfms_s, float32_ah_mulsub_f, float32)
 DO_MULADD(gvec_ah_vfms_d, float64_ah_mulsub_f, float64)
+DO_MULADD(gvec_ah_bfmls, bfloat16_ah_mulsub_f, bfloat16)
+
+#undef DO_MULADD
 
 /* For the indexed ops, SVE applies the index per 128-bit vector segment.
  * For AdvSIMD, there is of course only one such vector segment.
@@ -XXX,XX +XXX,XX @@ void HELPER(NAME)(void *vd, void *vn, void *vm, void *va,                  \
 DO_FMLA_IDX(gvec_fmla_idx_h, float16, H2, 0, 0)
 DO_FMLA_IDX(gvec_fmla_idx_s, float32, H4, 0, 0)
 DO_FMLA_IDX(gvec_fmla_idx_d, float64, H8, 0, 0)
+DO_FMLA_IDX(gvec_bfmla_idx, bfloat16, H2, 0, 0)
 
 DO_FMLA_IDX(gvec_fmls_idx_h, float16, H2, INT16_MIN, 0)
 DO_FMLA_IDX(gvec_fmls_idx_s, float32, H4, INT32_MIN, 0)
 DO_FMLA_IDX(gvec_fmls_idx_d, float64, H8, INT64_MIN, 0)
+DO_FMLA_IDX(gvec_bfmls_idx, bfloat16, H2, INT16_MIN, 0)
 
 DO_FMLA_IDX(gvec_ah_fmls_idx_h, float16, H2, 0, float_muladd_negate_product)
 DO_FMLA_IDX(gvec_ah_fmls_idx_s, float32, H4, 0, float_muladd_negate_product)
 DO_FMLA_IDX(gvec_ah_fmls_idx_d, float64, H8, 0, float_muladd_negate_product)
+DO_FMLA_IDX(gvec_ah_bfmls_idx, bfloat16, H2, 0, float_muladd_negate_product)
 
 #undef DO_FMLA_IDX
 
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-51-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/helper.h        |  2 ++
 target/arm/tcg/sme.decode      | 25 +++++++++++++++++++
 target/arm/tcg/translate-sme.c | 44 ++++++++++++++++++++++++++++++++++
 target/arm/tcg/vec_helper.c    |  2 ++
 4 files changed, 73 insertions(+)

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-52-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/sme.decode      | 12 ++++++++++++
 target/arm/tcg/translate-sme.c | 28 ++++++++++++++++++++++++++++
 2 files changed, 40 insertions(+)

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-53-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/helper-sme.h    |  5 +++
 target/arm/tcg/vec_internal.h  |  2 +
 target/arm/tcg/sme.decode      | 12 ++++++
 target/arm/tcg/sme_helper.c    | 74 ++++++++++++++++++++++++++++++++++
 target/arm/tcg/sve_helper.c    |  2 +-
 target/arm/tcg/translate-sme.c | 25 ++++++++++++
 6 files changed, 119 insertions(+), 1 deletion(-)

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-54-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/helper-sme.h    |  2 ++
 target/arm/tcg/vec_internal.h  |  1 +
 target/arm/tcg/sme.decode      |  5 ++++
 target/arm/tcg/sme_helper.c    | 45 ++++++++++++++++++++++++++++++++++
 target/arm/tcg/sve_helper.c    |  2 +-
 target/arm/tcg/translate-sme.c |  5 ++++
 6 files changed, 59 insertions(+), 1 deletion(-)

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-55-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/sme.decode      | 9 +++++++++
 target/arm/tcg/translate-sme.c | 5 +++++
 2 files changed, 14 insertions(+)

diff --git a/target/arm/tcg/sme.decode b/target/arm/tcg/sme.decode
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/sme.decode
+++ b/target/arm/tcg/sme.decode
@@ -XXX,XX +XXX,XX @@ SUB_aaz_d       11000001 111 000010 .. 111 ...00 11 ...     @az_4x4_o3
                 &zz_n n=1 zn=%zn_ax2
 @zz_2x1         ........ ... ..... ...... zn:5  .....       \
                 &zz_n n=1 zd=%zd_ax2
+@zz_2x2         ........ ... ..... ...... .... . .....      \
+                &zz_n n=2 zd=%zd_ax2 zn=%zn_ax2
+@zz_4x4         ........ ... ..... ...... .... . .....      \
+                &zz_n n=4 zd=%zd_ax4 zn=%zn_ax4
 
 BFCVT           11000001 011 00000 111000 ....0 .....       @zz_1x2
 BFCVTN          11000001 011 00000 111000 ....1 .....       @zz_1x2
@@ -XXX,XX +XXX,XX @@ FCVTN           11000001 001 00000 111000 ....1 .....       @zz_1x2
 
 FCVT_w          11000001 101 00000 111000 ..... ....0       @zz_2x1
 FCVTL           11000001 101 00000 111000 ..... ....1       @zz_2x1
+
+FCVTZS          11000001 001 00001 111000 ....0 ....0       @zz_2x2
+FCVTZS          11000001 001 10001 111000 ...00 ...00       @zz_4x4
+FCVTZU          11000001 001 00001 111000 ....1 ....0       @zz_2x2
+FCVTZU          11000001 001 10001 111000 ...01 ...00       @zz_4x4
diff --git a/target/arm/tcg/translate-sme.c b/target/arm/tcg/translate-sme.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-sme.c
+++ b/target/arm/tcg/translate-sme.c
@@ -XXX,XX +XXX,XX @@ TRANS_FEAT(FCVT_w, aa64_sme_f16f16, do_zz_fpst, a, 0,
            FPST_A64_F16, gen_helper_sme2_fcvt_w)
 TRANS_FEAT(FCVTL, aa64_sme_f16f16, do_zz_fpst, a, 0,
            FPST_A64_F16, gen_helper_sme2_fcvtl)
+
+TRANS_FEAT(FCVTZS, aa64_sme2, do_zz_fpst, a, 0,
+           FPST_A64, gen_helper_gvec_vcvt_rz_fs)
+TRANS_FEAT(FCVTZU, aa64_sme2, do_zz_fpst, a, 0,
+           FPST_A64, gen_helper_gvec_vcvt_rz_fu)
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-56-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/helper-sme.h    |  2 ++
 target/arm/tcg/sme.decode      |  5 +++++
 target/arm/tcg/sme_helper.c    | 22 ++++++++++++++++++++++
 target/arm/tcg/translate-sme.c |  5 +++++
 4 files changed, 34 insertions(+)

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-57-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/sme.decode      | 9 +++++++++
 target/arm/tcg/translate-sme.c | 9 +++++++++
 2 files changed, 18 insertions(+)

diff --git a/target/arm/tcg/sme.decode b/target/arm/tcg/sme.decode
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/sme.decode
+++ b/target/arm/tcg/sme.decode
@@ -XXX,XX +XXX,XX @@ SCVTF           11000001 001 00010 111000 ....0 ....0       @zz_2x2
 SCVTF           11000001 001 10010 111000 ...00 ...00       @zz_4x4
 UCVTF           11000001 001 00010 111000 ....1 ....0       @zz_2x2
 UCVTF           11000001 001 10010 111000 ...01 ...00       @zz_4x4
+
+FRINTN          11000001 101 01000 111000 ....0 ....0       @zz_2x2
+FRINTN          11000001 101 11000 111000 ...00 ...00       @zz_4x4
+FRINTP          11000001 101 01001 111000 ....0 ....0       @zz_2x2
+FRINTP          11000001 101 11001 111000 ...00 ...00       @zz_4x4
+FRINTM          11000001 101 01010 111000 ....0 ....0       @zz_2x2
+FRINTM          11000001 101 11010 111000 ...00 ...00       @zz_4x4
+FRINTA          11000001 101 01100 111000 ....0 ....0       @zz_2x2
+FRINTA          11000001 101 11100 111000 ...00 ...00       @zz_4x4
diff --git a/target/arm/tcg/translate-sme.c b/target/arm/tcg/translate-sme.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-sme.c
+++ b/target/arm/tcg/translate-sme.c
@@ -XXX,XX +XXX,XX @@ TRANS_FEAT(SCVTF, aa64_sme2, do_zz_fpst, a, 0,
            FPST_A64, gen_helper_sme2_scvtf)
 TRANS_FEAT(UCVTF, aa64_sme2, do_zz_fpst, a, 0,
            FPST_A64, gen_helper_sme2_ucvtf)
+
+TRANS_FEAT(FRINTN, aa64_sme2, do_zz_fpst, a, float_round_nearest_even,
+           FPST_A64, gen_helper_gvec_vrint_rm_s)
+TRANS_FEAT(FRINTP, aa64_sme2, do_zz_fpst, a, float_round_up,
+           FPST_A64, gen_helper_gvec_vrint_rm_s)
+TRANS_FEAT(FRINTM, aa64_sme2, do_zz_fpst, a, float_round_down,
+           FPST_A64, gen_helper_gvec_vrint_rm_s)
+TRANS_FEAT(FRINTA, aa64_sme2, do_zz_fpst, a, float_round_ties_away,
+           FPST_A64, gen_helper_gvec_vrint_rm_s)
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Inputs are a wider type of indeterminate sign.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-58-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/vec_internal.h | 7 +++++++
 1 file changed, 7 insertions(+)

From: Richard Henderson <richard.henderson@linaro.org>

Replace and remove do_sat_bhs.
This avoids multiple repetitions of INT*_MIN/MAX.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-59-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/sve_helper.c | 116 +++++++++++++++---------------------
 1 file changed, 48 insertions(+), 68 deletions(-)

diff --git a/target/arm/tcg/sve_helper.c b/target/arm/tcg/sve_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/sve_helper.c
+++ b/target/arm/tcg/sve_helper.c
@@ -XXX,XX +XXX,XX @@ DO_ZPZZ(sve2_uhsub_zpzz_h, uint16_t, H1_2, DO_HSUB_BHS)
 DO_ZPZZ(sve2_uhsub_zpzz_s, uint32_t, H1_4, DO_HSUB_BHS)
 DO_ZPZZ_D(sve2_uhsub_zpzz_d, uint64_t, DO_HSUB_D)
 
-static inline int32_t do_sat_bhs(int64_t val, int64_t min, int64_t max)
-{
-    return val >= max ? max : val <= min ? min : val;
-}
-
-#define DO_SQADD_B(n, m) do_sat_bhs((int64_t)n + m, INT8_MIN, INT8_MAX)
-#define DO_SQADD_H(n, m) do_sat_bhs((int64_t)n + m, INT16_MIN, INT16_MAX)
-#define DO_SQADD_S(n, m) do_sat_bhs((int64_t)n + m, INT32_MIN, INT32_MAX)
+#define DO_SQADD_B(n, m) do_ssat_b((int64_t)n + m)
+#define DO_SQADD_H(n, m) do_ssat_h((int64_t)n + m)
+#define DO_SQADD_S(n, m) do_ssat_s((int64_t)n + m)
 
 static inline int64_t do_sqadd_d(int64_t n, int64_t m)
 {
@@ -XXX,XX +XXX,XX @@ DO_ZPZZ(sve2_sqadd_zpzz_h, int16_t, H1_2, DO_SQADD_H)
 DO_ZPZZ(sve2_sqadd_zpzz_s, int32_t, H1_4, DO_SQADD_S)
 DO_ZPZZ_D(sve2_sqadd_zpzz_d, int64_t, do_sqadd_d)
 
-#define DO_UQADD_B(n, m) do_sat_bhs((int64_t)n + m, 0, UINT8_MAX)
-#define DO_UQADD_H(n, m) do_sat_bhs((int64_t)n + m, 0, UINT16_MAX)
-#define DO_UQADD_S(n, m) do_sat_bhs((int64_t)n + m, 0, UINT32_MAX)
+#define DO_UQADD_B(n, m) do_usat_b((int64_t)n + m)
+#define DO_UQADD_H(n, m) do_usat_h((int64_t)n + m)
+#define DO_UQADD_S(n, m) do_usat_s((int64_t)n + m)
 
 static inline uint64_t do_uqadd_d(uint64_t n, uint64_t m)
 {
@@ -XXX,XX +XXX,XX @@ DO_ZPZZ(sve2_uqadd_zpzz_h, uint16_t, H1_2, DO_UQADD_H)
 DO_ZPZZ(sve2_uqadd_zpzz_s, uint32_t, H1_4, DO_UQADD_S)
 DO_ZPZZ_D(sve2_uqadd_zpzz_d, uint64_t, do_uqadd_d)
 
-#define DO_SQSUB_B(n, m) do_sat_bhs((int64_t)n - m, INT8_MIN, INT8_MAX)
-#define DO_SQSUB_H(n, m) do_sat_bhs((int64_t)n - m, INT16_MIN, INT16_MAX)
-#define DO_SQSUB_S(n, m) do_sat_bhs((int64_t)n - m, INT32_MIN, INT32_MAX)
+#define DO_SQSUB_B(n, m) do_ssat_b((int64_t)n - m)
+#define DO_SQSUB_H(n, m) do_ssat_h((int64_t)n - m)
+#define DO_SQSUB_S(n, m) do_ssat_s((int64_t)n - m)
 
 static inline int64_t do_sqsub_d(int64_t n, int64_t m)
 {
@@ -XXX,XX +XXX,XX @@ DO_ZPZZ(sve2_sqsub_zpzz_h, int16_t, H1_2, DO_SQSUB_H)
 DO_ZPZZ(sve2_sqsub_zpzz_s, int32_t, H1_4, DO_SQSUB_S)
 DO_ZPZZ_D(sve2_sqsub_zpzz_d, int64_t, do_sqsub_d)
 
-#define DO_UQSUB_B(n, m) do_sat_bhs((int64_t)n - m, 0, UINT8_MAX)
-#define DO_UQSUB_H(n, m) do_sat_bhs((int64_t)n - m, 0, UINT16_MAX)
-#define DO_UQSUB_S(n, m) do_sat_bhs((int64_t)n - m, 0, UINT32_MAX)
+#define DO_UQSUB_B(n, m) do_usat_b((int64_t)n - m)
+#define DO_UQSUB_H(n, m) do_usat_h((int64_t)n - m)
+#define DO_UQSUB_S(n, m) do_usat_s((int64_t)n - m)
 
 static inline uint64_t do_uqsub_d(uint64_t n, uint64_t m)
 {
@@ -XXX,XX +XXX,XX @@ DO_ZPZZ(sve2_uqsub_zpzz_h, uint16_t, H1_2, DO_UQSUB_H)
 DO_ZPZZ(sve2_uqsub_zpzz_s, uint32_t, H1_4, DO_UQSUB_S)
 DO_ZPZZ_D(sve2_uqsub_zpzz_d, uint64_t, do_uqsub_d)
 
-#define DO_SUQADD_B(n, m) \
-    do_sat_bhs((int64_t)(int8_t)n + m, INT8_MIN, INT8_MAX)
-#define DO_SUQADD_H(n, m) \
-    do_sat_bhs((int64_t)(int16_t)n + m, INT16_MIN, INT16_MAX)
-#define DO_SUQADD_S(n, m) \
-    do_sat_bhs((int64_t)(int32_t)n + m, INT32_MIN, INT32_MAX)
+#define DO_SUQADD_B(n, m) do_ssat_b((int64_t)(int8_t)n + m)
+#define DO_SUQADD_H(n, m) do_ssat_h((int64_t)(int16_t)n + m)
+#define DO_SUQADD_S(n, m) do_ssat_s((int64_t)(int32_t)n + m)
 
 static inline int64_t do_suqadd_d(int64_t n, uint64_t m)
 {
@@ -XXX,XX +XXX,XX @@ DO_ZPZZ(sve2_suqadd_zpzz_h, uint16_t, H1_2, DO_SUQADD_H)
 DO_ZPZZ(sve2_suqadd_zpzz_s, uint32_t, H1_4, DO_SUQADD_S)
 DO_ZPZZ_D(sve2_suqadd_zpzz_d, uint64_t, do_suqadd_d)
 
-#define DO_USQADD_B(n, m) \
-    do_sat_bhs((int64_t)n + (int8_t)m, 0, UINT8_MAX)
-#define DO_USQADD_H(n, m) \
-    do_sat_bhs((int64_t)n + (int16_t)m, 0, UINT16_MAX)
-#define DO_USQADD_S(n, m) \
-    do_sat_bhs((int64_t)n + (int32_t)m, 0, UINT32_MAX)
+#define DO_USQADD_B(n, m) do_usat_b((int64_t)n + (int8_t)m)
+#define DO_USQADD_H(n, m) do_usat_h((int64_t)n + (int16_t)m)
+#define DO_USQADD_S(n, m) do_usat_s((int64_t)n + (int32_t)m)
 
 static inline uint64_t do_usqadd_d(uint64_t n, int64_t m)
 {
@@ -XXX,XX +XXX,XX @@ void HELPER(NAME)(void *vd, void *vn, uint32_t desc)                    \
     }                                                                   \
 }
 
-#define DO_SQXTN_H(n)  do_sat_bhs(n, INT8_MIN, INT8_MAX)
-#define DO_SQXTN_S(n)  do_sat_bhs(n, INT16_MIN, INT16_MAX)
-#define DO_SQXTN_D(n)  do_sat_bhs(n, INT32_MIN, INT32_MAX)
+DO_XTNB(sve2_sqxtnb_h, int16_t, do_ssat_b)
+DO_XTNB(sve2_sqxtnb_s, int32_t, do_ssat_h)
+DO_XTNB(sve2_sqxtnb_d, int64_t, do_ssat_s)
 
-DO_XTNB(sve2_sqxtnb_h, int16_t, DO_SQXTN_H)
-DO_XTNB(sve2_sqxtnb_s, int32_t, DO_SQXTN_S)
-DO_XTNB(sve2_sqxtnb_d, int64_t, DO_SQXTN_D)
+DO_XTNT(sve2_sqxtnt_h, int16_t, int8_t, H1, do_ssat_b)
+DO_XTNT(sve2_sqxtnt_s, int32_t, int16_t, H1_2, do_ssat_h)
+DO_XTNT(sve2_sqxtnt_d, int64_t, int32_t, H1_4, do_ssat_s)
 
-DO_XTNT(sve2_sqxtnt_h, int16_t, int8_t, H1, DO_SQXTN_H)
-DO_XTNT(sve2_sqxtnt_s, int32_t, int16_t, H1_2, DO_SQXTN_S)
-DO_XTNT(sve2_sqxtnt_d, int64_t, int32_t, H1_4, DO_SQXTN_D)
+DO_XTNB(sve2_uqxtnb_h, uint16_t, do_usat_b)
+DO_XTNB(sve2_uqxtnb_s, uint32_t, do_usat_h)
+DO_XTNB(sve2_uqxtnb_d, uint64_t, do_usat_s)
 
-#define DO_UQXTN_H(n)  do_sat_bhs(n, 0, UINT8_MAX)
-#define DO_UQXTN_S(n)  do_sat_bhs(n, 0, UINT16_MAX)
-#define DO_UQXTN_D(n)  do_sat_bhs(n, 0, UINT32_MAX)
+DO_XTNT(sve2_uqxtnt_h, uint16_t, uint8_t, H1, do_usat_b)
+DO_XTNT(sve2_uqxtnt_s, uint32_t, uint16_t, H1_2, do_usat_h)
+DO_XTNT(sve2_uqxtnt_d, uint64_t, uint32_t, H1_4, do_usat_s)
 
-DO_XTNB(sve2_uqxtnb_h, uint16_t, DO_UQXTN_H)
-DO_XTNB(sve2_uqxtnb_s, uint32_t, DO_UQXTN_S)
-DO_XTNB(sve2_uqxtnb_d, uint64_t, DO_UQXTN_D)
+DO_XTNB(sve2_sqxtunb_h, int16_t, do_usat_b)
+DO_XTNB(sve2_sqxtunb_s, int32_t, do_usat_h)
+DO_XTNB(sve2_sqxtunb_d, int64_t, do_usat_s)
 
-DO_XTNT(sve2_uqxtnt_h, uint16_t, uint8_t, H1, DO_UQXTN_H)
-DO_XTNT(sve2_uqxtnt_s, uint32_t, uint16_t, H1_2, DO_UQXTN_S)
-DO_XTNT(sve2_uqxtnt_d, uint64_t, uint32_t, H1_4, DO_UQXTN_D)
-
-DO_XTNB(sve2_sqxtunb_h, int16_t, DO_UQXTN_H)
-DO_XTNB(sve2_sqxtunb_s, int32_t, DO_UQXTN_S)
-DO_XTNB(sve2_sqxtunb_d, int64_t, DO_UQXTN_D)
-
-DO_XTNT(sve2_sqxtunt_h, int16_t, int8_t, H1, DO_UQXTN_H)
-DO_XTNT(sve2_sqxtunt_s, int32_t, int16_t, H1_2, DO_UQXTN_S)
-DO_XTNT(sve2_sqxtunt_d, int64_t, int32_t, H1_4, DO_UQXTN_D)
+DO_XTNT(sve2_sqxtunt_h, int16_t, int8_t, H1, do_usat_b)
+DO_XTNT(sve2_sqxtunt_s, int32_t, int16_t, H1_2, do_usat_h)
+DO_XTNT(sve2_sqxtunt_d, int64_t, int32_t, H1_4, do_usat_s)
 
 #undef DO_XTNB
 #undef DO_XTNT
@@ -XXX,XX +XXX,XX @@ DO_SHRNT(sve2_rshrnt_h, uint16_t, uint8_t, H1_2, H1, do_urshr)
 DO_SHRNT(sve2_rshrnt_s, uint32_t, uint16_t, H1_4, H1_2, do_urshr)
 DO_SHRNT(sve2_rshrnt_d, uint64_t, uint32_t, H1_8, H1_4, do_urshr)
 
-#define DO_SQSHRUN_H(x, sh) do_sat_bhs((int64_t)(x) >> sh, 0, UINT8_MAX)
-#define DO_SQSHRUN_S(x, sh) do_sat_bhs((int64_t)(x) >> sh, 0, UINT16_MAX)
-#define DO_SQSHRUN_D(x, sh) \
-    do_sat_bhs((int64_t)(x) >> (sh < 64 ? sh : 63), 0, UINT32_MAX)
+#define DO_SQSHRUN_H(x, sh) do_usat_b((int64_t)(x) >> sh)
+#define DO_SQSHRUN_S(x, sh) do_usat_h((int64_t)(x) >> sh)
+#define DO_SQSHRUN_D(x, sh) do_usat_s((int64_t)(x) >> (sh < 64 ? sh : 63))
 
 DO_SHRNB(sve2_sqshrunb_h, int16_t, uint8_t, DO_SQSHRUN_H)
 DO_SHRNB(sve2_sqshrunb_s, int32_t, uint16_t, DO_SQSHRUN_S)
@@ -XXX,XX +XXX,XX @@ DO_SHRNT(sve2_sqshrunt_h, int16_t, uint8_t, H1_2, H1, DO_SQSHRUN_H)
 DO_SHRNT(sve2_sqshrunt_s, int32_t, uint16_t, H1_4, H1_2, DO_SQSHRUN_S)
 DO_SHRNT(sve2_sqshrunt_d, int64_t, uint32_t, H1_8, H1_4, DO_SQSHRUN_D)
 
-#define DO_SQRSHRUN_H(x, sh) do_sat_bhs(do_srshr(x, sh), 0, UINT8_MAX)
-#define DO_SQRSHRUN_S(x, sh) do_sat_bhs(do_srshr(x, sh), 0, UINT16_MAX)
-#define DO_SQRSHRUN_D(x, sh) do_sat_bhs(do_srshr(x, sh), 0, UINT32_MAX)
+#define DO_SQRSHRUN_H(x, sh) do_usat_b(do_srshr(x, sh))
+#define DO_SQRSHRUN_S(x, sh) do_usat_h(do_srshr(x, sh))
+#define DO_SQRSHRUN_D(x, sh) do_usat_s(do_srshr(x, sh))
 
 DO_SHRNB(sve2_sqrshrunb_h, int16_t, uint8_t, DO_SQRSHRUN_H)
 DO_SHRNB(sve2_sqrshrunb_s, int32_t, uint16_t, DO_SQRSHRUN_S)
@@ -XXX,XX +XXX,XX @@ DO_SHRNT(sve2_sqrshrunt_h, int16_t, uint8_t, H1_2, H1, DO_SQRSHRUN_H)
 DO_SHRNT(sve2_sqrshrunt_s, int32_t, uint16_t, H1_4, H1_2, DO_SQRSHRUN_S)
 DO_SHRNT(sve2_sqrshrunt_d, int64_t, uint32_t, H1_8, H1_4, DO_SQRSHRUN_D)
 
-#define DO_SQSHRN_H(x, sh) do_sat_bhs(x >> sh, INT8_MIN, INT8_MAX)
-#define DO_SQSHRN_S(x, sh) do_sat_bhs(x >> sh, INT16_MIN, INT16_MAX)
-#define DO_SQSHRN_D(x, sh) do_sat_bhs(x >> sh, INT32_MIN, INT32_MAX)
+#define DO_SQSHRN_H(x, sh) do_ssat_b(x >> sh)
+#define DO_SQSHRN_S(x, sh) do_ssat_h(x >> sh)
+#define DO_SQSHRN_D(x, sh) do_ssat_s(x >> sh)
 
 DO_SHRNB(sve2_sqshrnb_h, int16_t, uint8_t, DO_SQSHRN_H)
 DO_SHRNB(sve2_sqshrnb_s, int32_t, uint16_t, DO_SQSHRN_S)
@@ -XXX,XX +XXX,XX @@ DO_SHRNT(sve2_sqshrnt_h, int16_t, uint8_t, H1_2, H1, DO_SQSHRN_H)
 DO_SHRNT(sve2_sqshrnt_s, int32_t, uint16_t, H1_4, H1_2, DO_SQSHRN_S)
 DO_SHRNT(sve2_sqshrnt_d, int64_t, uint32_t, H1_8, H1_4, DO_SQSHRN_D)
 
-#define DO_SQRSHRN_H(x, sh) do_sat_bhs(do_srshr(x, sh), INT8_MIN, INT8_MAX)
-#define DO_SQRSHRN_S(x, sh) do_sat_bhs(do_srshr(x, sh), INT16_MIN, INT16_MAX)
-#define DO_SQRSHRN_D(x, sh) do_sat_bhs(do_srshr(x, sh), INT32_MIN, INT32_MAX)
+#define DO_SQRSHRN_H(x, sh) do_ssat_b(do_srshr(x, sh))
+#define DO_SQRSHRN_S(x, sh) do_ssat_h(do_srshr(x, sh))
+#define DO_SQRSHRN_D(x, sh) do_ssat_s(do_srshr(x, sh))
 
 DO_SHRNB(sve2_sqrshrnb_h, int16_t, uint8_t, DO_SQRSHRN_H)
 DO_SHRNB(sve2_sqrshrnb_s, int32_t, uint16_t, DO_SQRSHRN_S)
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250704142112.1018902-60-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/helper-sme.h    |  20 ++++++
 target/arm/tcg/sme.decode      |  22 +++++++
 target/arm/tcg/sme_helper.c    | 116 +++++++++++++++++++++++++++++++++
 target/arm/tcg/translate-sme.c |  35 ++++++++++
 4 files changed, 193 insertions(+)

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-61-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/sve.decode      | 20 ++++++++++++++++----
 target/arm/tcg/translate-sve.c |  7 +++++++
 2 files changed, 23 insertions(+), 4 deletions(-)

diff --git a/target/arm/tcg/sve.decode b/target/arm/tcg/sve.decode
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/sve.decode
+++ b/target/arm/tcg/sve.decode
@@ -XXX,XX +XXX,XX @@
 # as propagated via the MOVPRFX instruction.
 %reg_movprfx    0:5
 
+%rn_ax2         6:4 !function=times_2
+
 ###########################################################################
 # Named attribute sets.  These are used to make nice(er) names
 # when creating helpers common to those for the individual
@@ -XXX,XX +XXX,XX @@
 # Two operand
 @pd_pn          ........ esz:2 .. .... ....... rn:4 . rd:4      &rr_esz
 @rd_rn          ........ esz:2 ...... ...... rn:5 rd:5          &rr_esz
+@rd_rnx2        ........ ... ..... ...... ..... rd:5            &rr_esz rn=%rn_ax2
 
 # Two operand with governing predicate, flags setting
 @pd_pg_pn_s     ........ . s:1 ...... .. pg:4 . rn:4 . rd:4     &rpr_s
@@ -XXX,XX +XXX,XX @@ UABA            01000101 .. 0 ..... 11111 1 ..... .....  @rd_rn_rm
 #### SVE2 Narrowing
 
 ## SVE2 saturating extract narrow
-
 # Bits 23, 18-16 are zero, limited in the translator via esz < 3 & imm == 0.
-SQXTNB          01000101 .. 1 ..... 010 000 ..... .....  @rd_rn_tszimm_shl
+
+{
+  SQCVTN_sh     01000101 00 1 10001 010 000 ....0 .....  @rd_rnx2 esz=1
+  SQXTNB        01000101 .. 1 ..... 010 000 ..... .....  @rd_rn_tszimm_shl
+}
 SQXTNT          01000101 .. 1 ..... 010 001 ..... .....  @rd_rn_tszimm_shl
-UQXTNB          01000101 .. 1 ..... 010 010 ..... .....  @rd_rn_tszimm_shl
+{
+  UQCVTN_sh     01000101 00 1 10001 010 010 ....0 .....  @rd_rnx2 esz=1
+  UQXTNB        01000101 .. 1 ..... 010 010 ..... .....  @rd_rn_tszimm_shl
+}
 UQXTNT          01000101 .. 1 ..... 010 011 ..... .....  @rd_rn_tszimm_shl
-SQXTUNB         01000101 .. 1 ..... 010 100 ..... .....  @rd_rn_tszimm_shl
+{
+  SQCVTUN_sh    01000101 00 1 10001 010 100 ....0 .....  @rd_rnx2 esz=1
+  SQXTUNB       01000101 .. 1 ..... 010 100 ..... .....  @rd_rn_tszimm_shl
+}
 SQXTUNT         01000101 .. 1 ..... 010 101 ..... .....  @rd_rn_tszimm_shl
 
 ## SVE2 bitwise shift right narrow
diff --git a/target/arm/tcg/translate-sve.c b/target/arm/tcg/translate-sve.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-sve.c
+++ b/target/arm/tcg/translate-sve.c
@@ -XXX,XX +XXX,XX @@ static void gen_uclamp(unsigned vece, uint32_t d, uint32_t n, uint32_t m,
 }
 
 TRANS_FEAT(UCLAMP, aa64_sme, gen_gvec_fn_arg_zzzz, gen_uclamp, a)
+
+TRANS_FEAT(SQCVTN_sh, aa64_sme2_or_sve2p1, gen_gvec_ool_zz,
+           gen_helper_sme2_sqcvtn_sh, a->rd, a->rn, 0)
+TRANS_FEAT(UQCVTN_sh, aa64_sme2_or_sve2p1, gen_gvec_ool_zz,
+           gen_helper_sme2_uqcvtn_sh, a->rd, a->rn, 0)
+TRANS_FEAT(SQCVTUN_sh, aa64_sme2_or_sve2p1, gen_gvec_ool_zz,
+           gen_helper_sme2_sqcvtun_sh, a->rd, a->rn, 0)
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250704142112.1018902-62-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/helper-sme.h    | 13 ++++++++++++
 target/arm/tcg/sme.decode      | 18 ++++++++++++++++
 target/arm/tcg/sme_helper.c    | 38 ++++++++++++++++++++++++++++++++++
 target/arm/tcg/translate-sme.c | 16 ++++++++++++++
 4 files changed, 85 insertions(+)

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-63-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/helper-sme.h    | 12 ++++++
 target/arm/tcg/sme.decode      | 11 ++++++
 target/arm/tcg/sme_helper.c    | 68 ++++++++++++++++++++++++++++++++++
 target/arm/tcg/translate-sme.c | 39 +++++++++++++++++++
 4 files changed, 130 insertions(+)

From: Richard Henderson <richard.henderson@linaro.org>

Unify two copies of these inline functions.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-64-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/vec_internal.h | 21 +++++++++++++++++++++
 target/arm/tcg/mve_helper.c   | 21 ---------------------
 target/arm/tcg/sve_helper.c   | 21 ---------------------
 3 files changed, 21 insertions(+), 42 deletions(-)

diff --git a/target/arm/tcg/vec_internal.h b/target/arm/tcg/vec_internal.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/vec_internal.h
+++ b/target/arm/tcg/vec_internal.h
@@ -XXX,XX +XXX,XX @@ int64_t do_sqrdmlah_d(int64_t, int64_t, int64_t, bool, bool);
 #define do_usat_h(val)  MIN(MAX(val, 0), UINT16_MAX)
 #define do_usat_s(val)  MIN(MAX(val, 0), UINT32_MAX)
 
+static inline uint64_t do_urshr(uint64_t x, unsigned sh)
+{
+    if (likely(sh < 64)) {
+        return (x >> sh) + ((x >> (sh - 1)) & 1);
+    } else if (sh == 64) {
+        return x >> 63;
+    } else {
+        return 0;
+    }
+}
+
+static inline int64_t do_srshr(int64_t x, unsigned sh)
+{
+    if (likely(sh < 64)) {
+        return (x >> sh) + ((x >> (sh - 1)) & 1);
+    } else {
+        /* Rounding the sign bit always produces 0. */
+        return 0;
+    }
+}
+
 /**
  * bfdotadd:
  * @sum: addend
diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/mve_helper.c
+++ b/target/arm/tcg/mve_helper.c
@@ -XXX,XX +XXX,XX @@ DO_VSHLL_ALL(vshllt, true)
     DO_VSHRN(OP##tb, true, 1, uint8_t, 2, uint16_t, FN)         \
     DO_VSHRN(OP##th, true, 2, uint16_t, 4, uint32_t, FN)
 
-static inline uint64_t do_urshr(uint64_t x, unsigned sh)
-{
-    if (likely(sh < 64)) {
-        return (x >> sh) + ((x >> (sh - 1)) & 1);
-    } else if (sh == 64) {
-        return x >> 63;
-    } else {
-        return 0;
-    }
-}
-
-static inline int64_t do_srshr(int64_t x, unsigned sh)
-{
-    if (likely(sh < 64)) {
-        return (x >> sh) + ((x >> (sh - 1)) & 1);
-    } else {
-        /* Rounding the sign bit always produces 0. */
-        return 0;
-    }
-}
-
 DO_VSHRN_ALL(vshrn, DO_SHR)
 DO_VSHRN_ALL(vrshrn, do_urshr)
 
diff --git a/target/arm/tcg/sve_helper.c b/target/arm/tcg/sve_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/sve_helper.c
+++ b/target/arm/tcg/sve_helper.c
@@ -XXX,XX +XXX,XX @@ void HELPER(NAME)(void *vd, void *vn, void *vg, uint32_t desc)  \
    when N is negative, add 2**M-1.  */
 #define DO_ASRD(N, M) ((N + (N < 0 ? ((__typeof(N))1 << M) - 1 : 0)) >> M)
 
-static inline uint64_t do_urshr(uint64_t x, unsigned sh)
-{
-    if (likely(sh < 64)) {
-        return (x >> sh) + ((x >> (sh - 1)) & 1);
-    } else if (sh == 64) {
-        return x >> 63;
-    } else {
-        return 0;
-    }
-}
-
-static inline int64_t do_srshr(int64_t x, unsigned sh)
-{
-    if (likely(sh < 64)) {
-        return (x >> sh) + ((x >> (sh - 1)) & 1);
-    } else {
-        /* Rounding the sign bit always produces 0. */
-        return 0;
-    }
-}
-
 DO_ZPZI(sve_asr_zpzi_b, int8_t, H1, DO_SHR)
 DO_ZPZI(sve_asr_zpzi_h, int16_t, H1_2, DO_SHR)
 DO_ZPZI(sve_asr_zpzi_s, int32_t, H1_4, DO_SHR)
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250704142112.1018902-65-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/helper-sme.h    |  20 ++++++
 target/arm/tcg/sme.decode      |  37 ++++++++++
 target/arm/tcg/sme_helper.c    | 120 +++++++++++++++++++++++++++++++++
 target/arm/tcg/translate-sme.c |  33 +++++++++
 4 files changed, 210 insertions(+)

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-66-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/helper-sme.h    | 12 +++++++
 target/arm/tcg/sme.decode      | 12 +++++++
 target/arm/tcg/sme_helper.c    | 62 ++++++++++++++++++++++++++++++++++
 target/arm/tcg/translate-sme.c | 40 ++++++++++++++++++++++
 4 files changed, 126 insertions(+)

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-67-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/helper-sme.h    | 15 +++++++
 target/arm/tcg/sme.decode      | 17 ++++++++
 target/arm/tcg/sme_helper.c    | 56 +++++++++++++++++++++++++
 target/arm/tcg/translate-sme.c | 75 ++++++++++++++++++++++++++++++++++
 4 files changed, 163 insertions(+)

From: Richard Henderson <richard.henderson@linaro.org>

These instructions are present in both SME(1) and SVE2.1 extensions.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-68-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/translate-sve.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/target/arm/tcg/translate-sve.c b/target/arm/tcg/translate-sve.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-sve.c
+++ b/target/arm/tcg/translate-sve.c
@@ -XXX,XX +XXX,XX @@ static void gen_sclamp(unsigned vece, uint32_t d, uint32_t n, uint32_t m,
     tcg_gen_gvec_4(d, n, m, a, oprsz, maxsz, &ops[vece]);
 }
 
-TRANS_FEAT(SCLAMP, aa64_sme, gen_gvec_fn_arg_zzzz, gen_sclamp, a)
+TRANS_FEAT(SCLAMP, aa64_sme_or_sve2p1, gen_gvec_fn_arg_zzzz, gen_sclamp, a)
 
 static void gen_uclamp_i32(TCGv_i32 d, TCGv_i32 n, TCGv_i32 m, TCGv_i32 a)
 {
@@ -XXX,XX +XXX,XX @@ static void gen_uclamp(unsigned vece, uint32_t d, uint32_t n, uint32_t m,
     tcg_gen_gvec_4(d, n, m, a, oprsz, maxsz, &ops[vece]);
 }
 
-TRANS_FEAT(UCLAMP, aa64_sme, gen_gvec_fn_arg_zzzz, gen_uclamp, a)
+TRANS_FEAT(UCLAMP, aa64_sme_or_sve2p1, gen_gvec_fn_arg_zzzz, gen_uclamp, a)
 
 TRANS_FEAT(SQCVTN_sh, aa64_sme2_or_sve2p1, gen_gvec_ool_zz,
            gen_helper_sme2_sqcvtn_sh, a->rd, a->rn, 0)
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

This is the single vector version within SVE decode space.

Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-69-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/sve.decode      |  2 ++
 target/arm/tcg/translate-sve.c | 22 ++++++++++++++++++++++
 2 files changed, 24 insertions(+)

diff --git a/target/arm/tcg/sve.decode b/target/arm/tcg/sve.decode
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/sve.decode
+++ b/target/arm/tcg/sve.decode
@@ -XXX,XX +XXX,XX @@ PSEL            00100101 .1 1 000 .. 01 .... 0 .... 0 ....  \
 
 SCLAMP          01000100 .. 0 ..... 110000 ..... .....          @rda_rn_rm
 UCLAMP          01000100 .. 0 ..... 110001 ..... .....          @rda_rn_rm
+
+FCLAMP          01100100 .. 1 ..... 001001 ..... .....          @rda_rn_rm
diff --git a/target/arm/tcg/translate-sve.c b/target/arm/tcg/translate-sve.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-sve.c
+++ b/target/arm/tcg/translate-sve.c
@@ -XXX,XX +XXX,XX @@ static void gen_uclamp(unsigned vece, uint32_t d, uint32_t n, uint32_t m,
 
 TRANS_FEAT(UCLAMP, aa64_sme_or_sve2p1, gen_gvec_fn_arg_zzzz, gen_uclamp, a)
 
+static bool trans_FCLAMP(DisasContext *s, arg_FCLAMP *a)
+{
+    static gen_helper_gvec_3_ptr * const fn[] = {
+        gen_helper_sme2_bfclamp,
+        gen_helper_sme2_fclamp_h,
+        gen_helper_sme2_fclamp_s,
+        gen_helper_sme2_fclamp_d,
+    };
+
+    /* This insn uses MO_8 to encode BFloat16. */
+    if (a->esz == MO_8
+        ? !dc_isar_feature(aa64_sve_b16b16, s)
+        : !dc_isar_feature(aa64_sme2_or_sve2p1, s)) {
+        return false;
+    }
+
+    /* So far we never optimize rda with MOVPRFX */
+    assert(a->rd == a->ra);
+    return gen_gvec_fpst_zzz(s, fn[a->esz], a->rd, a->rn, a->rm, 1,
+                             a->esz == MO_16 ? FPST_A64_F16 : FPST_A64);
+}
+
 TRANS_FEAT(SQCVTN_sh, aa64_sme2_or_sve2p1, gen_gvec_ool_zz,
            gen_helper_sme2_sqcvtn_sh, a->rd, a->rn, 0)
 TRANS_FEAT(UQCVTN_sh, aa64_sme2_or_sve2p1, gen_gvec_ool_zz,
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-70-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/sme.decode      | 23 +++++++++++++++++++++++
 target/arm/tcg/translate-sme.c | 20 ++++++++++++++++++++
 2 files changed, 43 insertions(+)

diff --git a/target/arm/tcg/sme.decode b/target/arm/tcg/sme.decode
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/sme.decode
+++ b/target/arm/tcg/sme.decode
@@ -XXX,XX +XXX,XX @@ UCLAMP          11000001 esz:2 1 zm:5 110001 zn:5 .... 1    \
                 &zzz_en zd=%zd_ax2 n=2
 UCLAMP          11000001 esz:2 1 zm:5 110011 zn:5 ...0 1    \
                 &zzz_en zd=%zd_ax4 n=4
+
+### SME Multiple Zero
+
+&zero_za        rv off ngrp nvec
+
+ZERO_za         11000000 000011 000 .. 0000000000 off:3 \
+                &zero_za ngrp=2 nvec=1 rv=%mova_rv
+ZERO_za         11000000 000011 100 .. 0000000000 off:3 \
+                &zero_za ngrp=4 nvec=1 rv=%mova_rv
+
+ZERO_za         11000000 000011 001 .. 0000000000 ...   \
+                &zero_za ngrp=1 nvec=2 rv=%mova_rv off=%off3_x2
+ZERO_za         11000000 000011 010 .. 0000000000 0..   \
+                &zero_za ngrp=2 nvec=2 rv=%mova_rv off=%off2_x2
+ZERO_za         11000000 000011 011 .. 0000000000 0..   \
+                &zero_za ngrp=4 nvec=2 rv=%mova_rv off=%off2_x2
+
+ZERO_za         11000000 000011 101 .. 0000000000 0..   \
+                &zero_za ngrp=1 nvec=4 rv=%mova_rv off=%off2_x4
+ZERO_za         11000000 000011 110 .. 0000000000 00.   \
+                &zero_za ngrp=2 nvec=4 rv=%mova_rv off=%off1_x4
+ZERO_za         11000000 000011 111 .. 0000000000 00.   \
+                &zero_za ngrp=4 nvec=4 rv=%mova_rv off=%off1_x4
diff --git a/target/arm/tcg/translate-sme.c b/target/arm/tcg/translate-sme.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-sme.c
+++ b/target/arm/tcg/translate-sme.c
@@ -XXX,XX +XXX,XX @@ static bool trans_ZERO_zt0(DisasContext *s, arg_ZERO_zt0 *a)
     return true;
 }
 
+static bool trans_ZERO_za(DisasContext *s, arg_ZERO_za *a)
+{
+    if (!dc_isar_feature(aa64_sme2p1, s)) {
+        return false;
+    }
+    if (sme_smza_enabled_check(s)) {
+        int svl = streaming_vec_reg_size(s);
+        int vstride = svl / a->ngrp;
+        TCGv_ptr t_za = get_zarray(s, a->rv, a->off, a->ngrp, a->nvec);
+
+        for (int r = 0; r < a->ngrp; ++r) {
+            for (int i = 0; i < a->nvec; ++i) {
+                int o_za = (r * vstride + i) * sizeof(ARMVectorReg);
+                tcg_gen_gvec_dup_imm_var(MO_64, t_za, o_za, svl, svl, 0);
+            }
+        }
+    }
+    return true;
+}
+
 static bool do_mova_tile(DisasContext *s, arg_mova_p *a, bool to_vec)
 {
     static gen_helper_gvec_4 * const h_fns[5] = {
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

For WHILE, we have the count of enabled predicates, so we don't
need to search to compute the PredTest result.  Reuse the logic
that will shortly be required for counted predicates.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250704142112.1018902-71-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/sve_helper.c | 81 +++++++++++++++++++++----------------
 1 file changed, 46 insertions(+), 35 deletions(-)

diff --git a/target/arm/tcg/sve_helper.c b/target/arm/tcg/sve_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/sve_helper.c
+++ b/target/arm/tcg/sve_helper.c
@@ -XXX,XX +XXX,XX @@ uint64_t HELPER(sve_cntp)(void *vn, void *vg, uint32_t pred_desc)
     return sum;
 }
 
+/* C.f. Arm pseudocode PredCountTest */
+static uint32_t pred_count_test(uint32_t elements, uint32_t count, bool invert)
+{
+    uint32_t flags;
+
+    if (count == 0) {
+        flags = 1;                              /* !N, Z, C */
+    } else if (!invert) {
+        flags = (1u << 31) | 2;                 /* N, !Z */
+        flags |= count != elements;             /* C */
+    } else {
+        flags = 2;                              /* !Z, !C */
+        flags |= (count == elements) << 31;     /* N */
+    }
+    return flags;
+}
+
 uint32_t HELPER(sve_whilel)(void *vd, uint32_t count, uint32_t pred_desc)
 {
     intptr_t oprsz = FIELD_EX32(pred_desc, PREDDESC, OPRSZ);
     intptr_t esz = FIELD_EX32(pred_desc, PREDDESC, ESZ);
     uint64_t esz_mask = pred_esz_masks[esz];
     ARMPredicateReg *d = vd;
-    uint32_t flags;
-    intptr_t i;
+    intptr_t i, oprbits = oprsz * 8;
+
+    tcg_debug_assert(count <= oprbits);
 
     /* Begin with a zero predicate register.  */
-    flags = do_zero(d, oprsz);
-    if (count == 0) {
-        return flags;
+    do_zero(d, oprsz);
+    if (count) {
+        /* Set all of the requested bits.  */
+        for (i = 0; i < count / 64; ++i) {
+            d->p[i] = esz_mask;
+        }
+        if (count & 63) {
+            d->p[i] = MAKE_64BIT_MASK(0, count & 63) & esz_mask;
+        }
     }
 
-    /* Set all of the requested bits.  */
-    for (i = 0; i < count / 64; ++i) {
-        d->p[i] = esz_mask;
-    }
-    if (count & 63) {
-        d->p[i] = MAKE_64BIT_MASK(0, count & 63) & esz_mask;
-    }
-
-    return predtest_ones(d, oprsz, esz_mask);
+    return pred_count_test(oprbits, count, false);
 }
 
 uint32_t HELPER(sve_whileg)(void *vd, uint32_t count, uint32_t pred_desc)
@@ -XXX,XX +XXX,XX @@ uint32_t HELPER(sve_whileg)(void *vd, uint32_t count, uint32_t pred_desc)
     intptr_t esz = FIELD_EX32(pred_desc, PREDDESC, ESZ);
     uint64_t esz_mask = pred_esz_masks[esz];
     ARMPredicateReg *d = vd;
-    intptr_t i, invcount, oprbits;
+    intptr_t i, invcount, oprbits = oprsz * 8;
     uint64_t bits;
 
-    if (count == 0) {
-        return do_zero(d, oprsz);
-    }
-
-    oprbits = oprsz * 8;
     tcg_debug_assert(count <= oprbits);
 
-    bits = esz_mask;
-    if (oprbits & 63) {
-        bits &= MAKE_64BIT_MASK(0, oprbits & 63);
-    }
-
-    invcount = oprbits - count;
-    for (i = (oprsz - 1) / 8; i > invcount / 64; --i) {
-        d->p[i] = bits;
+    /* Begin with a zero predicate register.  */
+    do_zero(d, oprsz);
+    if (count) {
+        /* Set all of the requested bits.  */
         bits = esz_mask;
+        if (oprbits & 63) {
+            bits &= MAKE_64BIT_MASK(0, oprbits & 63);
+        }
+
+        invcount = oprbits - count;
+        for (i = (oprsz - 1) / 8; i > invcount / 64; --i) {
+            d->p[i] = bits;
+            bits = esz_mask;
+        }
+        d->p[i] = bits & MAKE_64BIT_MASK(invcount & 63, 64);
     }
 
-    d->p[i] = bits & MAKE_64BIT_MASK(invcount & 63, 64);
-
-    while (--i >= 0) {
-        d->p[i] = 0;
-    }
-
-    return predtest_ones(d, oprsz, esz_mask);
+    return pred_count_test(oprbits, count, true);
 }
 
 /* Recursive reduction on a function;
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Merge predtest_ones into its only caller.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-72-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/sve_helper.c | 34 ++++++++++++++--------------------
 1 file changed, 14 insertions(+), 20 deletions(-)

diff --git a/target/arm/tcg/sve_helper.c b/target/arm/tcg/sve_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/sve_helper.c
+++ b/target/arm/tcg/sve_helper.c
@@ -XXX,XX +XXX,XX @@ void HELPER(sve_brkn)(void *vd, void *vn, void *vg, uint32_t pred_desc)
     }
 }
 
-/* As if PredTest(Ones(PL), D, esz).  */
-static uint32_t predtest_ones(ARMPredicateReg *d, intptr_t oprsz,
-                              uint64_t esz_mask)
-{
-    uint32_t flags = PREDTEST_INIT;
-    intptr_t i;
-
-    for (i = 0; i < oprsz / 8; i++) {
-        flags = iter_predtest_fwd(d->p[i], esz_mask, flags);
-    }
-    if (oprsz & 7) {
-        uint64_t mask = ~(-1ULL << (8 * (oprsz & 7)));
-        flags = iter_predtest_fwd(d->p[i], esz_mask & mask, flags);
-    }
-    return flags;
-}
-
 uint32_t HELPER(sve_brkns)(void *vd, void *vn, void *vg, uint32_t pred_desc)
 {
     intptr_t oprsz = FIELD_EX32(pred_desc, PREDDESC, OPRSZ);
     if (last_active_pred(vn, vg, oprsz)) {
-        return predtest_ones(vd, oprsz, -1);
-    } else {
-        return do_zero(vd, oprsz);
+        ARMPredicateReg *d = vd;
+        uint32_t flags = PREDTEST_INIT;
+        intptr_t i;
+
+        /* As if PredTest(Ones(PL), D, MO_8).  */
+        for (i = 0; i < oprsz / 8; i++) {
+            flags = iter_predtest_fwd(d->p[i], -1, flags);
+        }
+        if (oprsz & 7) {
+            uint64_t mask = ~(-1ULL << (8 * (oprsz & 7)));
+            flags = iter_predtest_fwd(d->p[i], mask, flags);
+        }
+        return flags;
     }
+    return do_zero(vd, oprsz);
 }
 
 uint64_t HELPER(sve_cntp)(void *vn, void *vg, uint32_t pred_desc)
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Expand to memset plus the return value, when used.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250704142112.1018902-73-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/sve_helper.c | 28 +++++++++++-----------------
 1 file changed, 11 insertions(+), 17 deletions(-)

diff --git a/target/arm/tcg/sve_helper.c b/target/arm/tcg/sve_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/sve_helper.c
+++ b/target/arm/tcg/sve_helper.c
@@ -XXX,XX +XXX,XX @@ static uint32_t compute_brks_m(uint64_t *d, uint64_t *n, uint64_t *g,
     return flags;
 }
 
-static uint32_t do_zero(ARMPredicateReg *d, intptr_t oprsz)
-{
-    /* It is quicker to zero the whole predicate than loop on OPRSZ.
-     * The compiler should turn this into 4 64-bit integer stores.
-     */
-    memset(d, 0, sizeof(ARMPredicateReg));
-    return PREDTEST_INIT;
-}
-
 void HELPER(sve_brkpa)(void *vd, void *vn, void *vm, void *vg,
                        uint32_t pred_desc)
 {
@@ -XXX,XX +XXX,XX @@ void HELPER(sve_brkpa)(void *vd, void *vn, void *vm, void *vg,
     if (last_active_pred(vn, vg, oprsz)) {
         compute_brk_z(vd, vm, vg, oprsz, true);
     } else {
-        do_zero(vd, oprsz);
+        memset(vd, 0, sizeof(ARMPredicateReg));
     }
 }
 
@@ -XXX,XX +XXX,XX @@ uint32_t HELPER(sve_brkpas)(void *vd, void *vn, void *vm, void *vg,
     if (last_active_pred(vn, vg, oprsz)) {
         return compute_brks_z(vd, vm, vg, oprsz, true);
     } else {
-        return do_zero(vd, oprsz);
+        memset(vd, 0, sizeof(ARMPredicateReg));
+        return PREDTEST_INIT;
     }
 }
 
@@ -XXX,XX +XXX,XX @@ void HELPER(sve_brkpb)(void *vd, void *vn, void *vm, void *vg,
     if (last_active_pred(vn, vg, oprsz)) {
         compute_brk_z(vd, vm, vg, oprsz, false);
     } else {
-        do_zero(vd, oprsz);
+        memset(vd, 0, sizeof(ARMPredicateReg));
     }
 }
 
@@ -XXX,XX +XXX,XX @@ uint32_t HELPER(sve_brkpbs)(void *vd, void *vn, void *vm, void *vg,
     if (last_active_pred(vn, vg, oprsz)) {
         return compute_brks_z(vd, vm, vg, oprsz, false);
     } else {
-        return do_zero(vd, oprsz);
+        memset(vd, 0, sizeof(ARMPredicateReg));
+        return PREDTEST_INIT;
     }
 }
 
@@ -XXX,XX +XXX,XX @@ void HELPER(sve_brkn)(void *vd, void *vn, void *vg, uint32_t pred_desc)
 {
     intptr_t oprsz = FIELD_EX32(pred_desc, PREDDESC, OPRSZ);
     if (!last_active_pred(vn, vg, oprsz)) {
-        do_zero(vd, oprsz);
+        memset(vd, 0, sizeof(ARMPredicateReg));
     }
 }
 
@@ -XXX,XX +XXX,XX @@ uint32_t HELPER(sve_brkns)(void *vd, void *vn, void *vg, uint32_t pred_desc)
         }
         return flags;
     }
-    return do_zero(vd, oprsz);
+    memset(vd, 0, sizeof(ARMPredicateReg));
+    return PREDTEST_INIT;
 }
 
 uint64_t HELPER(sve_cntp)(void *vn, void *vg, uint32_t pred_desc)
@@ -XXX,XX +XXX,XX @@ uint32_t HELPER(sve_whilel)(void *vd, uint32_t count, uint32_t pred_desc)
     tcg_debug_assert(count <= oprbits);
 
     /* Begin with a zero predicate register.  */
-    do_zero(d, oprsz);
+    memset(d, 0, sizeof(*d));
     if (count) {
         /* Set all of the requested bits.  */
         for (i = 0; i < count / 64; ++i) {
@@ -XXX,XX +XXX,XX @@ uint32_t HELPER(sve_whileg)(void *vd, uint32_t count, uint32_t pred_desc)
     tcg_debug_assert(count <= oprbits);
 
     /* Begin with a zero predicate register.  */
-    do_zero(d, oprsz);
+    memset(d, 0, sizeof(*d));
     if (count) {
         /* Set all of the requested bits.  */
         bits = esz_mask;
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-74-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/sve_helper.c | 26 ++++++++++++++++----------
 1 file changed, 16 insertions(+), 10 deletions(-)

diff --git a/target/arm/tcg/sve_helper.c b/target/arm/tcg/sve_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/sve_helper.c
+++ b/target/arm/tcg/sve_helper.c
@@ -XXX,XX +XXX,XX @@ static uint32_t pred_count_test(uint32_t elements, uint32_t count, bool invert)
     return flags;
 }
 
-uint32_t HELPER(sve_whilel)(void *vd, uint32_t count, uint32_t pred_desc)
+/* D must be cleared on entry. */
+static void do_whilel(ARMPredicateReg *d, uint64_t esz_mask,
+                      uint32_t count, uint32_t oprbits)
 {
-    intptr_t oprsz = FIELD_EX32(pred_desc, PREDDESC, OPRSZ);
-    intptr_t esz = FIELD_EX32(pred_desc, PREDDESC, ESZ);
-    uint64_t esz_mask = pred_esz_masks[esz];
-    ARMPredicateReg *d = vd;
-    intptr_t i, oprbits = oprsz * 8;
-
     tcg_debug_assert(count <= oprbits);
-
-    /* Begin with a zero predicate register.  */
-    memset(d, 0, sizeof(*d));
     if (count) {
+        uint32_t i;
+
         /* Set all of the requested bits.  */
         for (i = 0; i < count / 64; ++i) {
             d->p[i] = esz_mask;
@@ -XXX,XX +XXX,XX @@ uint32_t HELPER(sve_whilel)(void *vd, uint32_t count, uint32_t pred_desc)
             d->p[i] = MAKE_64BIT_MASK(0, count & 63) & esz_mask;
         }
     }
+}
 
+uint32_t HELPER(sve_whilel)(void *vd, uint32_t count, uint32_t pred_desc)
+{
+    uint32_t oprsz = FIELD_EX32(pred_desc, PREDDESC, OPRSZ);
+    uint32_t esz = FIELD_EX32(pred_desc, PREDDESC, ESZ);
+    uint32_t oprbits = oprsz * 8;
+    uint64_t esz_mask = pred_esz_masks[esz];
+    ARMPredicateReg *d = vd;
+
+    memset(d, 0, sizeof(*d));
+    do_whilel(d, esz_mask, count, oprbits);
     return pred_count_test(oprbits, count, false);
 }
 
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250704142112.1018902-75-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/sve_helper.c | 39 +++++++++++++++++++------------------
 1 file changed, 20 insertions(+), 19 deletions(-)

diff --git a/target/arm/tcg/sve_helper.c b/target/arm/tcg/sve_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/sve_helper.c
+++ b/target/arm/tcg/sve_helper.c
@@ -XXX,XX +XXX,XX @@ uint32_t HELPER(sve_whilel)(void *vd, uint32_t count, uint32_t pred_desc)
     return pred_count_test(oprbits, count, false);
 }
 
-uint32_t HELPER(sve_whileg)(void *vd, uint32_t count, uint32_t pred_desc)
+/* D must be cleared on entry. */
+static void do_whileg(ARMPredicateReg *d, uint64_t esz_mask,
+                      uint32_t count, uint32_t oprbits)
 {
-    intptr_t oprsz = FIELD_EX32(pred_desc, PREDDESC, OPRSZ);
-    intptr_t esz = FIELD_EX32(pred_desc, PREDDESC, ESZ);
-    uint64_t esz_mask = pred_esz_masks[esz];
-    ARMPredicateReg *d = vd;
-    intptr_t i, invcount, oprbits = oprsz * 8;
-    uint64_t bits;
-
     tcg_debug_assert(count <= oprbits);
-
-    /* Begin with a zero predicate register.  */
-    memset(d, 0, sizeof(*d));
     if (count) {
-        /* Set all of the requested bits.  */
-        bits = esz_mask;
-        if (oprbits & 63) {
-            bits &= MAKE_64BIT_MASK(0, oprbits & 63);
-        }
+        uint32_t i, invcount = oprbits - count;
+        uint64_t bits = esz_mask & MAKE_64BIT_MASK(invcount & 63, 64);
 
-        invcount = oprbits - count;
-        for (i = (oprsz - 1) / 8; i > invcount / 64; --i) {
+        for (i = invcount / 64; i < oprbits / 64; ++i) {
             d->p[i] = bits;
             bits = esz_mask;
         }
-        d->p[i] = bits & MAKE_64BIT_MASK(invcount & 63, 64);
+        if (oprbits & 63) {
+            d->p[i] = bits & MAKE_64BIT_MASK(0, oprbits & 63);
+        }
     }
+}
 
+uint32_t HELPER(sve_whileg)(void *vd, uint32_t count, uint32_t pred_desc)
+{
+    uint32_t oprsz = FIELD_EX32(pred_desc, PREDDESC, OPRSZ);
+    uint32_t esz = FIELD_EX32(pred_desc, PREDDESC, ESZ);
+    uint32_t oprbits = oprsz * 8;
+    uint64_t esz_mask = pred_esz_masks[esz];
+    ARMPredicateReg *d = vd;
+
+    memset(d, 0, sizeof(*d));
+    do_whileg(d, esz_mask, count, oprbits);
     return pred_count_test(oprbits, count, true);
 }
 
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Change the API to pass element count rather than bit count.
This will be helpful later for predicate as counter.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-76-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/sve_helper.c    |  2 ++
 target/arm/tcg/translate-sve.c | 13 +++++--------
 2 files changed, 7 insertions(+), 8 deletions(-)

diff --git a/target/arm/tcg/sve_helper.c b/target/arm/tcg/sve_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/sve_helper.c
+++ b/target/arm/tcg/sve_helper.c
@@ -XXX,XX +XXX,XX @@ uint32_t HELPER(sve_whilel)(void *vd, uint32_t count, uint32_t pred_desc)
     uint64_t esz_mask = pred_esz_masks[esz];
     ARMPredicateReg *d = vd;
 
+    count <<= esz;
     memset(d, 0, sizeof(*d));
     do_whilel(d, esz_mask, count, oprbits);
     return pred_count_test(oprbits, count, false);
@@ -XXX,XX +XXX,XX @@ uint32_t HELPER(sve_whileg)(void *vd, uint32_t count, uint32_t pred_desc)
     uint64_t esz_mask = pred_esz_masks[esz];
     ARMPredicateReg *d = vd;
 
+    count <<= esz;
     memset(d, 0, sizeof(*d));
     do_whileg(d, esz_mask, count, oprbits);
     return pred_count_test(oprbits, count, true);
diff --git a/target/arm/tcg/translate-sve.c b/target/arm/tcg/translate-sve.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-sve.c
+++ b/target/arm/tcg/translate-sve.c
@@ -XXX,XX +XXX,XX @@ static bool trans_WHILE(DisasContext *s, arg_WHILE *a)
     t2 = tcg_temp_new_i32();
     tcg_gen_extrl_i64_i32(t2, t0);
 
-    /* Scale elements to bits.  */
-    tcg_gen_shli_i32(t2, t2, a->esz);
-
     desc = FIELD_DP32(desc, PREDDESC, OPRSZ, vsz / 8);
     desc = FIELD_DP32(desc, PREDDESC, ESZ, a->esz);
 
@@ -XXX,XX +XXX,XX @@ static bool trans_WHILE_ptr(DisasContext *s, arg_WHILE_ptr *a)
     op0 = read_cpu_reg(s, a->rn, 1);
     op1 = read_cpu_reg(s, a->rm, 1);
 
-    tmax = tcg_constant_i64(vsz);
+    tmax = tcg_constant_i64(vsz >> a->esz);
     diff = tcg_temp_new_i64();
 
     if (a->rw) {
@@ -XXX,XX +XXX,XX @@ static bool trans_WHILE_ptr(DisasContext *s, arg_WHILE_ptr *a)
         tcg_gen_sub_i64(diff, op0, op1);
         tcg_gen_sub_i64(t1, op1, op0);
         tcg_gen_movcond_i64(TCG_COND_GEU, diff, op0, op1, diff, t1);
-        /* Round down to a multiple of ESIZE.  */
-        tcg_gen_andi_i64(diff, diff, -1 << a->esz);
+        /* Divide, rounding down, by ESIZE.  */
+        tcg_gen_shri_i64(diff, diff, a->esz);
         /* If op1 == op0, diff == 0, and the condition is always true. */
         tcg_gen_movcond_i64(TCG_COND_EQ, diff, op0, op1, tmax, diff);
     } else {
         /* WHILEWR */
         tcg_gen_sub_i64(diff, op1, op0);
-        /* Round down to a multiple of ESIZE.  */
-        tcg_gen_andi_i64(diff, diff, -1 << a->esz);
+        /* Divide, rounding down, by ESIZE.  */
+        tcg_gen_shri_i64(diff, diff, a->esz);
         /* If op0 >= op1, diff <= 0, the condition is always true. */
         tcg_gen_movcond_i64(TCG_COND_GEU, diff, op0, op1, tmax, diff);
     }
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Use TRANS_FEAT to select the correct predicate.
Pass the helper and a boolean to do_WHILE.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-77-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/sve.decode      |  4 +++-
 target/arm/tcg/translate-sve.c | 23 +++++++++--------------
 2 files changed, 12 insertions(+), 15 deletions(-)

diff --git a/target/arm/tcg/sve.decode b/target/arm/tcg/sve.decode
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/sve.decode
+++ b/target/arm/tcg/sve.decode
@@ -XXX,XX +XXX,XX @@ SINCDECP_z      00100101 .. 1010 d:1 u:1 10000 00 .... .....    @incdec2_pred
 CTERM           00100101 1 sf:1 1 rm:5 001000 rn:5 ne:1 0000
 
 # SVE integer compare scalar count and limit
-WHILE           00100101 esz:2 1 rm:5 000 sf:1 u:1 lt:1 rn:5 eq:1 rd:4
+&while          esz rd rn rm sf u eq
+WHILE_lt        00100101 esz:2 1 rm:5 000 sf:1 u:1 1 rn:5 eq:1 rd:4  &while
+WHILE_gt        00100101 esz:2 1 rm:5 000 sf:1 u:1 0 rn:5 eq:1 rd:4  &while
 
 # SVE2 pointer conflict compare
 WHILE_ptr       00100101 esz:2 1 rm:5 001 100 rn:5 rw:1 rd:4
diff --git a/target/arm/tcg/translate-sve.c b/target/arm/tcg/translate-sve.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-sve.c
+++ b/target/arm/tcg/translate-sve.c
@@ -XXX,XX +XXX,XX @@ static bool trans_CTERM(DisasContext *s, arg_CTERM *a)
     return true;
 }
 
-static bool trans_WHILE(DisasContext *s, arg_WHILE *a)
+typedef void gen_while_fn(TCGv_i32, TCGv_ptr, TCGv_i32, TCGv_i32);
+static bool do_WHILE(DisasContext *s, arg_while *a, bool lt, gen_while_fn *fn)
 {
     TCGv_i64 op0, op1, t0, t1, tmax;
     TCGv_i32 t2;
@@ -XXX,XX +XXX,XX @@ static bool trans_WHILE(DisasContext *s, arg_WHILE *a)
     TCGCond cond;
     uint64_t maxval;
     /* Note that GE/HS has a->eq == 0 and GT/HI has a->eq == 1. */
-    bool eq = a->eq == a->lt;
+    bool eq = a->eq == lt;
 
-    /* The greater-than conditions are all SVE2. */
-    if (a->lt
-        ? !dc_isar_feature(aa64_sve, s)
-        : !dc_isar_feature(aa64_sve2, s)) {
-        return false;
-    }
     if (!sve_access_check(s)) {
         return true;
     }
@@ -XXX,XX +XXX,XX @@ static bool trans_WHILE(DisasContext *s, arg_WHILE *a)
     t0 = tcg_temp_new_i64();
     t1 = tcg_temp_new_i64();
 
-    if (a->lt) {
+    if (lt) {
         tcg_gen_sub_i64(t0, op1, op0);
         if (a->u) {
             maxval = a->sf ? UINT64_MAX : UINT32_MAX;
@@ -XXX,XX +XXX,XX @@ static bool trans_WHILE(DisasContext *s, arg_WHILE *a)
     ptr = tcg_temp_new_ptr();
     tcg_gen_addi_ptr(ptr, tcg_env, pred_full_reg_offset(s, a->rd));
 
-    if (a->lt) {
-        gen_helper_sve_whilel(t2, ptr, t2, tcg_constant_i32(desc));
-    } else {
-        gen_helper_sve_whileg(t2, ptr, t2, tcg_constant_i32(desc));
-    }
+    fn(t2, ptr, t2, tcg_constant_i32(desc));
+
     do_pred_flags(t2);
     return true;
 }
 
+TRANS_FEAT(WHILE_lt, aa64_sve, do_WHILE, a, true, gen_helper_sve_whilel)
+TRANS_FEAT(WHILE_gt, aa64_sve2, do_WHILE, a, false, gen_helper_sve_whileg)
+
 static bool trans_WHILE_ptr(DisasContext *s, arg_WHILE_ptr *a)
 {
     TCGv_i64 op0, op1, diff, t1, tmax;
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-79-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/helper-sve.h    |  3 +++
 target/arm/tcg/sve.decode      |  8 +++++++
 target/arm/tcg/sve_helper.c    | 40 ++++++++++++++++++++++++++++++++++
 target/arm/tcg/translate-sve.c | 14 ++++++++----
 4 files changed, 61 insertions(+), 4 deletions(-)

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-80-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/helper-sve.h    |  3 ++
 target/arm/tcg/sve.decode      | 11 +++++++
 target/arm/tcg/sve_helper.c    | 53 ++++++++++++++++++++++++++++++++++
 target/arm/tcg/translate-sve.c | 22 ++++++++++----
 4 files changed, 84 insertions(+), 5 deletions(-)

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-81-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/sve.decode      |  1 +
 target/arm/tcg/translate-sve.c | 16 ++++++++++++++++
 2 files changed, 17 insertions(+)

diff --git a/target/arm/tcg/sve.decode b/target/arm/tcg/sve.decode
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/sve.decode
+++ b/target/arm/tcg/sve.decode
@@ -XXX,XX +XXX,XX @@ PTEST           00100101 01 010000 11 pg:4 0 rn:4 0 0000
 
 # SVE predicate initialize
 PTRUE           00100101 esz:2 01100 s:1 111000 pat:5 0 rd:4
+PTRUE_cnt       00100101 esz:2 1000000111100000010 ...          rd=%pnd
 
 # SVE initialize FFR
 SETFFR          00100101 0010 1100 1001 0000 0000 0000
diff --git a/target/arm/tcg/translate-sve.c b/target/arm/tcg/translate-sve.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-sve.c
+++ b/target/arm/tcg/translate-sve.c
@@ -XXX,XX +XXX,XX @@ static bool do_predset(DisasContext *s, int esz, int rd, int pat, bool setflag)
 
 TRANS_FEAT(PTRUE, aa64_sve, do_predset, a->esz, a->rd, a->pat, a->s)
 
+static bool trans_PTRUE_cnt(DisasContext *s, arg_PTRUE_cnt *a)
+{
+    if (!dc_isar_feature(aa64_sme2_or_sve2p1, s)) {
+        return false;
+    }
+    if (sve_access_check(s)) {
+        /* Canonical TRUE is 0 count, invert bit, plus element size. */
+        int val = (1 << 15) | (1 << a->esz);
+
+        /* Write val to the first uint64_t; clear all of the rest. */
+        tcg_gen_gvec_dup_imm(MO_64, pred_full_reg_offset(s, a->rd),
+                             8, size_for_gvec(pred_full_reg_size(s)), val);
+    }
+    return true;
+}
+
 /* Note pat == 31 is #all, to set all elements.  */
 TRANS_FEAT_NONSTREAMING(SETFFR, aa64_sve,
                         do_predset, 0, FFR_PRED_NUM, 31, false)
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-82-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/helper-sve.h    | 25 ++++++++++++++++++
 target/arm/tcg/sve.decode      |  7 ++++++
 target/arm/tcg/sve_helper.c    | 46 ++++++++++++++++++++++++++++++++++
 target/arm/tcg/translate-sve.c | 35 ++++++++++++++++++++++++++
 4 files changed, 113 insertions(+)

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-83-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/helper-sve.h    |  2 +
 target/arm/tcg/vec_internal.h  | 74 ++++++++++++++++++++++++++++++++++
 target/arm/tcg/sve.decode      |  6 +++
 target/arm/tcg/sve_helper.c    | 28 +++++++++++++
 target/arm/tcg/translate-sve.c | 36 +++++++++++++++++
 5 files changed, 146 insertions(+)

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-84-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/helper-sme.h    |   5 +
 target/arm/tcg/sme.decode      |   9 +
 target/arm/tcg/sme_helper.c    | 317 +++++++++++++++++++++++++++++++++
 target/arm/tcg/translate-sme.c |  31 ++++
 4 files changed, 362 insertions(+)

diff --git a/target/arm/tcg/helper-sme.h b/target/arm/tcg/helper-sme.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/helper-sme.h
+++ b/target/arm/tcg/helper-sme.h
@@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(sme2_fclamp_h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, fpst, i3
 DEF_HELPER_FLAGS_5(sme2_fclamp_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, fpst, i32)
 DEF_HELPER_FLAGS_5(sme2_fclamp_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, fpst, i32)
 DEF_HELPER_FLAGS_5(sme2_bfclamp, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, fpst, i32)
+
+DEF_HELPER_FLAGS_5(sme2_sel_b, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32, i32)
+DEF_HELPER_FLAGS_5(sme2_sel_h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32, i32)
+DEF_HELPER_FLAGS_5(sme2_sel_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32, i32)
+DEF_HELPER_FLAGS_5(sme2_sel_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32, i32)
diff --git a/target/arm/tcg/sme.decode b/target/arm/tcg/sme.decode
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/sme.decode
+++ b/target/arm/tcg/sme.decode
@@ -XXX,XX +XXX,XX @@ UCLAMP          11000001 esz:2 1 zm:5 110001 zn:5 .... 1    \
 UCLAMP          11000001 esz:2 1 zm:5 110011 zn:5 ...0 1    \
                 &zzz_en zd=%zd_ax4 n=4
 
+### SME2 Multi-vector SVE Select
+
+%sel_pg         10:3 !function=plus_8
+
+SEL             11000001 esz:2 1 ....0 100 ... ....0 ....0  \
+                n=2 zd=%zd_ax2 zn=%zn_ax2 zm=%zm_ax2 pg=%sel_pg
+SEL             11000001 esz:2 1 ...01 100 ... ...00 ...00  \
+                n=4 zd=%zd_ax4 zn=%zn_ax4 zm=%zm_ax4 pg=%sel_pg
+
 ### SME Multiple Zero
 
 &zero_za        rv off ngrp nvec
diff --git a/target/arm/tcg/sme_helper.c b/target/arm/tcg/sme_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/sme_helper.c
+++ b/target/arm/tcg/sme_helper.c
@@ -XXX,XX +XXX,XX @@ FCLAMP(sme2_fclamp_d, float64, H8)
 FCLAMP(sme2_bfclamp, bfloat16, H2)
 
 #undef FCLAMP
+
+void HELPER(sme2_sel_b)(void *vd, void *vn, void *vm,
+                        uint32_t png, uint32_t desc)
+{
+    int vl = simd_oprsz(desc);
+    int nreg = simd_data(desc);
+    int elements = vl / sizeof(uint8_t);
+    DecodeCounter p = decode_counter(png, vl, MO_8);
+
+    if (p.lg2_stride == 0) {
+        if (p.invert) {
+            for (int r = 0; r < nreg; r++) {
+                uint8_t *d = vd + r * sizeof(ARMVectorReg);
+                uint8_t *n = vn + r * sizeof(ARMVectorReg);
+                uint8_t *m = vm + r * sizeof(ARMVectorReg);
+                int split = p.count - r * elements;
+
+                if (split <= 0) {
+                    memcpy(d, n, vl);  /* all true */
+                } else if (elements <= split) {
+                    memcpy(d, m, vl);  /* all false */
+                } else {
+                    for (int e = 0; e < split; e++) {
+                        d[H1(e)] = m[H1(e)];
+                    }
+                    for (int e = split; e < elements; e++) {
+                        d[H1(e)] = n[H1(e)];
+                    }
+                }
+            }
+        } else {
+            for (int r = 0; r < nreg; r++) {
+                uint8_t *d = vd + r * sizeof(ARMVectorReg);
+                uint8_t *n = vn + r * sizeof(ARMVectorReg);
+                uint8_t *m = vm + r * sizeof(ARMVectorReg);
+                int split = p.count - r * elements;
+
+                if (split <= 0) {
+                    memcpy(d, m, vl);  /* all false */
+                } else if (elements <= split) {
+                    memcpy(d, n, vl);  /* all true */
+                } else {
+                    for (int e = 0; e < split; e++) {
+                        d[H1(e)] = n[H1(e)];
+                    }
+                    for (int e = split; e < elements; e++) {
+                        d[H1(e)] = m[H1(e)];
+                    }
+                }
+            }
+        }
+    } else {
+        int estride = 1 << p.lg2_stride;
+        if (p.invert) {
+            for (int r = 0; r < nreg; r++) {
+                uint8_t *d = vd + r * sizeof(ARMVectorReg);
+                uint8_t *n = vn + r * sizeof(ARMVectorReg);
+                uint8_t *m = vm + r * sizeof(ARMVectorReg);
+                int split = p.count - r * elements;
+                int e = 0;
+
+                for (; e < MIN(split, elements); e++) {
+                    d[H1(e)] = m[H1(e)];
+                }
+                for (; e < elements; e += estride) {
+                    d[H1(e)] = n[H1(e)];
+                    for (int i = 1; i < estride; i++) {
+                        d[H1(e + i)] = m[H1(e + i)];
+                    }
+                }
+            }
+        } else {
+            for (int r = 0; r < nreg; r++) {
+                uint8_t *d = vd + r * sizeof(ARMVectorReg);
+                uint8_t *n = vn + r * sizeof(ARMVectorReg);
+                uint8_t *m = vm + r * sizeof(ARMVectorReg);
+                int split = p.count - r * elements;
+                int e = 0;
+
+                for (; e < MIN(split, elements); e += estride) {
+                    d[H1(e)] = n[H1(e)];
+                    for (int i = 1; i < estride; i++) {
+                        d[H1(e + i)] = m[H1(e + i)];
+                    }
+                }
+                for (; e < elements; e++) {
+                    d[H1(e)] = m[H1(e)];
+                }
+            }
+        }
+    }
+}
+
+void HELPER(sme2_sel_h)(void *vd, void *vn, void *vm,
+                        uint32_t png, uint32_t desc)
+{
+    int vl = simd_oprsz(desc);
+    int nreg = simd_data(desc);
+    int elements = vl / sizeof(uint16_t);
+    DecodeCounter p = decode_counter(png, vl, MO_16);
+
+    if (p.lg2_stride == 0) {
+        if (p.invert) {
+            for (int r = 0; r < nreg; r++) {
+                uint16_t *d = vd + r * sizeof(ARMVectorReg);
+                uint16_t *n = vn + r * sizeof(ARMVectorReg);
+                uint16_t *m = vm + r * sizeof(ARMVectorReg);
+                int split = p.count - r * elements;
+
+                if (split <= 0) {
+                    memcpy(d, n, vl);  /* all true */
+                } else if (elements <= split) {
+                    memcpy(d, m, vl);  /* all false */
+                } else {
+                    for (int e = 0; e < split; e++) {
+                        d[H2(e)] = m[H2(e)];
+                    }
+                    for (int e = split; e < elements; e++) {
+                        d[H2(e)] = n[H2(e)];
+                    }
+                }
+            }
+        } else {
+            for (int r = 0; r < nreg; r++) {
+                uint16_t *d = vd + r * sizeof(ARMVectorReg);
+                uint16_t *n = vn + r * sizeof(ARMVectorReg);
+                uint16_t *m = vm + r * sizeof(ARMVectorReg);
+                int split = p.count - r * elements;
+
+                if (split <= 0) {
+                    memcpy(d, m, vl);  /* all false */
+                } else if (elements <= split) {
+                    memcpy(d, n, vl);  /* all true */
+                } else {
+                    for (int e = 0; e < split; e++) {
+                        d[H2(e)] = n[H2(e)];
+                    }
+                    for (int e = split; e < elements; e++) {
+                        d[H2(e)] = m[H2(e)];
+                    }
+                }
+            }
+        }
+    } else {
+        int estride = 1 << p.lg2_stride;
+        if (p.invert) {
+            for (int r = 0; r < nreg; r++) {
+                uint16_t *d = vd + r * sizeof(ARMVectorReg);
+                uint16_t *n = vn + r * sizeof(ARMVectorReg);
+                uint16_t *m = vm + r * sizeof(ARMVectorReg);
+                int split = p.count - r * elements;
+                int e = 0;
+
+                for (; e < MIN(split, elements); e++) {
+                    d[H2(e)] = m[H2(e)];
+                }
+                for (; e < elements; e += estride) {
+                    d[H2(e)] = n[H2(e)];
+                    for (int i = 1; i < estride; i++) {
+                        d[H2(e + i)] = m[H2(e + i)];
+                    }
+                }
+            }
+        } else {
+            for (int r = 0; r < nreg; r++) {
+                uint16_t *d = vd + r * sizeof(ARMVectorReg);
+                uint16_t *n = vn + r * sizeof(ARMVectorReg);
+                uint16_t *m = vm + r * sizeof(ARMVectorReg);
+                int split = p.count - r * elements;
+                int e = 0;
+
+                for (; e < MIN(split, elements); e += estride) {
+                    d[H2(e)] = n[H2(e)];
+                    for (int i = 1; i < estride; i++) {
+                        d[H2(e + i)] = m[H2(e + i)];
+                    }
+                }
+                for (; e < elements; e++) {
+                    d[H2(e)] = m[H2(e)];
+                }
+            }
+        }
+    }
+}
+
+void HELPER(sme2_sel_s)(void *vd, void *vn, void *vm,
+                        uint32_t png, uint32_t desc)
+{
+    int vl = simd_oprsz(desc);
+    int nreg = simd_data(desc);
+    int elements = vl / sizeof(uint32_t);
+    DecodeCounter p = decode_counter(png, vl, MO_32);
+
+    if (p.lg2_stride == 0) {
+        if (p.invert) {
+            for (int r = 0; r < nreg; r++) {
+                uint32_t *d = vd + r * sizeof(ARMVectorReg);
+                uint32_t *n = vn + r * sizeof(ARMVectorReg);
+                uint32_t *m = vm + r * sizeof(ARMVectorReg);
+                int split = p.count - r * elements;
+
+                if (split <= 0) {
+                    memcpy(d, n, vl);  /* all true */
+                } else if (elements <= split) {
+                    memcpy(d, m, vl);  /* all false */
+                } else {
+                    for (int e = 0; e < split; e++) {
+                        d[H4(e)] = m[H4(e)];
+                    }
+                    for (int e = split; e < elements; e++) {
+                        d[H4(e)] = n[H4(e)];
+                    }
+                }
+            }
+        } else {
+            for (int r = 0; r < nreg; r++) {
+                uint32_t *d = vd + r * sizeof(ARMVectorReg);
+                uint32_t *n = vn + r * sizeof(ARMVectorReg);
+                uint32_t *m = vm + r * sizeof(ARMVectorReg);
+                int split = p.count - r * elements;
+
+                if (split <= 0) {
+                    memcpy(d, m, vl);  /* all false */
+                } else if (elements <= split) {
+                    memcpy(d, n, vl);  /* all true */
+                } else {
+                    for (int e = 0; e < split; e++) {
+                        d[H4(e)] = n[H4(e)];
+                    }
+                    for (int e = split; e < elements; e++) {
+                        d[H4(e)] = m[H4(e)];
+                    }
+                }
+            }
+        }
+    } else {
+        /* p.esz must be MO_64, so stride must be 2. */
+        if (p.invert) {
+            for (int r = 0; r < nreg; r++) {
+                uint32_t *d = vd + r * sizeof(ARMVectorReg);
+                uint32_t *n = vn + r * sizeof(ARMVectorReg);
+                uint32_t *m = vm + r * sizeof(ARMVectorReg);
+                int split = p.count - r * elements;
+                int e = 0;
+
+                for (; e < MIN(split, elements); e++) {
+                    d[H4(e)] = m[H4(e)];
+                }
+                for (; e < elements; e += 2) {
+                    d[H4(e)] = n[H4(e)];
+                    d[H4(e + 1)] = m[H4(e + 1)];
+                }
+            }
+        } else {
+            for (int r = 0; r < nreg; r++) {
+                uint32_t *d = vd + r * sizeof(ARMVectorReg);
+                uint32_t *n = vn + r * sizeof(ARMVectorReg);
+                uint32_t *m = vm + r * sizeof(ARMVectorReg);
+                int split = p.count - r * elements;
+                int e = 0;
+
+                for (; e < MIN(split, elements); e += 2) {
+                    d[H4(e)] = n[H4(e)];
+                    d[H4(e + 1)] = m[H4(e + 1)];
+                }
+                for (; e < elements; e++) {
+                    d[H4(e)] = m[H4(e)];
+                }
+            }
+        }
+    }
+}
+
+void HELPER(sme2_sel_d)(void *vd, void *vn, void *vm,
+                        uint32_t png, uint32_t desc)
+{
+    int vl = simd_oprsz(desc);
+    int nreg = simd_data(desc);
+    int elements = vl / sizeof(uint64_t);
+    DecodeCounter p = decode_counter(png, vl, MO_64);
+
+    if (p.invert) {
+        for (int r = 0; r < nreg; r++) {
+            uint64_t *d = vd + r * sizeof(ARMVectorReg);
+            uint64_t *n = vn + r * sizeof(ARMVectorReg);
+            uint64_t *m = vm + r * sizeof(ARMVectorReg);
+            int split = p.count - r * elements;
+
+            if (split <= 0) {
+                memcpy(d, n, vl);  /* all true */
+            } else if (elements <= split) {
+                memcpy(d, m, vl);  /* all false */
+            } else {
+                memcpy(d, m, split * sizeof(uint64_t));
+                memcpy(d + split, n + split,
+                       (elements - split) * sizeof(uint64_t));
+            }
+        }
+    } else {
+        for (int r = 0; r < nreg; r++) {
+            uint64_t *d = vd + r * sizeof(ARMVectorReg);
+            uint64_t *n = vn + r * sizeof(ARMVectorReg);
+            uint64_t *m = vm + r * sizeof(ARMVectorReg);
+            int split = p.count - r * elements;
+
+            if (split <= 0) {
+                memcpy(d, m, vl);  /* all false */
+            } else if (elements <= split) {
+                memcpy(d, n, vl);  /* all true */
+            } else {
+                memcpy(d, n, split * sizeof(uint64_t));
+                memcpy(d + split, m + split,
+                       (elements - split) * sizeof(uint64_t));
+            }
+        }
+    }
+}
diff --git a/target/arm/tcg/translate-sme.c b/target/arm/tcg/translate-sme.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-sme.c
+++ b/target/arm/tcg/translate-sme.c
@@ -XXX,XX +XXX,XX @@ static gen_helper_gvec_3 * const uclamp_fns[] = {
     gen_helper_sme2_uclamp_d,
 };
 TRANS(UCLAMP, do_clamp, a, uclamp_fns)
+
+static bool trans_SEL(DisasContext *s, arg_SEL *a)
+{
+    typedef void sme_sel_fn(TCGv_ptr, TCGv_ptr, TCGv_ptr, TCGv_i32, TCGv_i32);
+    static sme_sel_fn * const fns[4] = {
+        gen_helper_sme2_sel_b, gen_helper_sme2_sel_h,
+        gen_helper_sme2_sel_s, gen_helper_sme2_sel_d
+    };
+
+    if (!dc_isar_feature(aa64_sme2, s)) {
+        return false;
+    }
+    if (sme_sm_enabled_check(s)) {
+        int svl = streaming_vec_reg_size(s);
+        uint32_t desc = simd_desc(svl, svl, a->n);
+        TCGv_ptr t_d = tcg_temp_new_ptr();
+        TCGv_ptr t_n = tcg_temp_new_ptr();
+        TCGv_ptr t_m = tcg_temp_new_ptr();
+        TCGv_i32 png = tcg_temp_new_i32();
+
+        tcg_gen_addi_ptr(t_d, tcg_env, vec_full_reg_offset(s, a->zd));
+        tcg_gen_addi_ptr(t_n, tcg_env, vec_full_reg_offset(s, a->zn));
+        tcg_gen_addi_ptr(t_m, tcg_env, vec_full_reg_offset(s, a->zm));
+
+        tcg_gen_ld16u_i32(png, tcg_env, pred_full_reg_offset(s, a->pg)
+                          ^ (HOST_BIG_ENDIAN ? 6 : 0));
+
+        fns[a->esz](t_d, t_n, t_m, png, tcg_constant_i32(desc));
+    }
+    return true;
+}
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-85-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/helper-sve.h    | 15 ++++++++++++
 target/arm/tcg/sve.decode      |  5 ++++
 target/arm/tcg/sve_helper.c    | 42 ++++++++++++++++++++++++++++++++++
 target/arm/tcg/translate-sve.c |  3 +++
 4 files changed, 65 insertions(+)

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-86-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/helper-sve.h    | 49 ++++++++++++++++++++++++
 target/arm/tcg/sve.decode      |  8 ++++
 target/arm/tcg/sve_helper.c    | 70 +++++++++++++++++++++-------------
 target/arm/tcg/translate-sve.c | 48 +++++++++++++++++++++++
 4 files changed, 148 insertions(+), 27 deletions(-)

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-87-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/sve.decode      |  6 ++++++
 target/arm/tcg/translate-sve.c | 30 ++++++++++++++++++++++++++++++
 2 files changed, 36 insertions(+)

diff --git a/target/arm/tcg/sve.decode b/target/arm/tcg/sve.decode
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/sve.decode
+++ b/target/arm/tcg/sve.decode
@@ -XXX,XX +XXX,XX @@ FMLSLT_zzzw     01100100 10 1 ..... 10 1 00 1 ..... .....  @rda_rn_rm_ex esz=2
 
 BFMLALB_zzzw    01100100 11 1 ..... 10 0 00 0 ..... .....  @rda_rn_rm_ex esz=2
 BFMLALT_zzzw    01100100 11 1 ..... 10 0 00 1 ..... .....  @rda_rn_rm_ex esz=2
+BFMLSLB_zzzw    01100100 11 1 ..... 10 1 00 0 ..... .....  @rda_rn_rm_ex esz=2
+BFMLSLT_zzzw    01100100 11 1 ..... 10 1 00 1 ..... .....  @rda_rn_rm_ex esz=2
 
 ### SVE2 floating-point dot-product
 FDOT_zzzz       01100100 00 1 ..... 10 0 00 0 ..... .....  @rda_rn_rm_ex esz=2
 BFDOT_zzzz      01100100 01 1 ..... 10 0 00 0 ..... .....  @rda_rn_rm_ex esz=2
 
 ### SVE2 floating-point multiply-add long (indexed)
+
 FMLALB_zzxw     01100100 10 1 ..... 0100.0 ..... .....     @rrxr_3a esz=2
 FMLALT_zzxw     01100100 10 1 ..... 0100.1 ..... .....     @rrxr_3a esz=2
 FMLSLB_zzxw     01100100 10 1 ..... 0110.0 ..... .....     @rrxr_3a esz=2
 FMLSLT_zzxw     01100100 10 1 ..... 0110.1 ..... .....     @rrxr_3a esz=2
+
 BFMLALB_zzxw    01100100 11 1 ..... 0100.0 ..... .....     @rrxr_3a esz=2
 BFMLALT_zzxw    01100100 11 1 ..... 0100.1 ..... .....     @rrxr_3a esz=2
+BFMLSLB_zzxw    01100100 11 1 ..... 0110.0 ..... .....     @rrxr_3a esz=2
+BFMLSLT_zzxw    01100100 11 1 ..... 0110.1 ..... .....     @rrxr_3a esz=2
 
 ### SVE2 floating-point dot-product (indexed)
 
diff --git a/target/arm/tcg/translate-sve.c b/target/arm/tcg/translate-sve.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-sve.c
+++ b/target/arm/tcg/translate-sve.c
@@ -XXX,XX +XXX,XX @@ static bool do_BFMLAL_zzxw(DisasContext *s, arg_rrxr_esz *a, bool sel)
 TRANS_FEAT(BFMLALB_zzxw, aa64_sve_bf16, do_BFMLAL_zzxw, a, false)
 TRANS_FEAT(BFMLALT_zzxw, aa64_sve_bf16, do_BFMLAL_zzxw, a, true)
 
+static bool do_BFMLSL_zzzw(DisasContext *s, arg_rrrr_esz *a, bool sel)
+{
+    if (s->fpcr_ah) {
+        return gen_gvec_fpst_zzzz(s, gen_helper_gvec_ah_bfmlsl,
+                                  a->rd, a->rn, a->rm, a->ra, sel, FPST_AH);
+    } else {
+        return gen_gvec_fpst_zzzz(s, gen_helper_gvec_bfmlsl,
+                                  a->rd, a->rn, a->rm, a->ra, sel, FPST_A64);
+    }
+}
+
+TRANS_FEAT(BFMLSLB_zzzw, aa64_sme2_or_sve2p1, do_BFMLSL_zzzw, a, false)
+TRANS_FEAT(BFMLSLT_zzzw, aa64_sme2_or_sve2p1, do_BFMLSL_zzzw, a, true)
+
+static bool do_BFMLSL_zzxw(DisasContext *s, arg_rrxr_esz *a, bool sel)
+{
+    if (s->fpcr_ah) {
+        return gen_gvec_fpst_zzzz(s, gen_helper_gvec_ah_bfmlsl_idx,
+                                  a->rd, a->rn, a->rm, a->ra,
+                                  (a->index << 1) | sel, FPST_AH);
+    } else {
+        return gen_gvec_fpst_zzzz(s, gen_helper_gvec_bfmlsl_idx,
+                                  a->rd, a->rn, a->rm, a->ra,
+                                  (a->index << 1) | sel, FPST_A64);
+    }
+}
+
+TRANS_FEAT(BFMLSLB_zzxw, aa64_sme2_or_sve2p1, do_BFMLSL_zzxw, a, false)
+TRANS_FEAT(BFMLSLT_zzxw, aa64_sme2_or_sve2p1, do_BFMLSL_zzxw, a, true)
+
 static bool trans_PSEL(DisasContext *s, arg_psel *a)
 {
     int vl = vec_full_reg_size(s);
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-88-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/helper-sve.h    |  1 +
 target/arm/tcg/sve.decode      |  3 ++-
 target/arm/tcg/sve_helper.c    | 21 +++++++++++++++++++++
 target/arm/tcg/translate-sve.c | 30 ++++++++++++++++++++++++++++++
 4 files changed, 54 insertions(+), 1 deletion(-)

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-89-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/sve.decode      |  6 ++++++
 target/arm/tcg/translate-sve.c | 21 +++++++++++++++++++++
 2 files changed, 27 insertions(+)

diff --git a/target/arm/tcg/sve.decode b/target/arm/tcg/sve.decode
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/sve.decode
+++ b/target/arm/tcg/sve.decode
@@ -XXX,XX +XXX,XX @@ DUP_s           00000101 .. 1 00000 001110 ..... .....          @rd_rn
 DUP_x           00000101 .. 1 ..... 001000 rn:5 rd:5 \
                 &rri imm=%imm7_22_16
 
+# SVE Permute Vector - one source quadwords
+DUPQ            00000101 001 imm:4    1 001001 rn:5 rd:5        &rri_esz esz=0
+DUPQ            00000101 001 imm:3   10 001001 rn:5 rd:5        &rri_esz esz=1
+DUPQ            00000101 001 imm:2  100 001001 rn:5 rd:5        &rri_esz esz=2
+DUPQ            00000101 001 imm:1 1000 001001 rn:5 rd:5        &rri_esz esz=3
+
 # SVE insert SIMD&FP scalar register
 INSR_f          00000101 .. 1 10100 001110 ..... .....          @rdn_rm
 
diff --git a/target/arm/tcg/translate-sve.c b/target/arm/tcg/translate-sve.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-sve.c
+++ b/target/arm/tcg/translate-sve.c
@@ -XXX,XX +XXX,XX @@ static bool trans_DUP_x(DisasContext *s, arg_DUP_x *a)
     return true;
 }
 
+static bool trans_DUPQ(DisasContext *s, arg_DUPQ *a)
+{
+    unsigned vl, dofs, nofs;
+
+    if (!dc_isar_feature(aa64_sme2p1_or_sve2p1, s)) {
+        return false;
+    }
+    if (!sve_access_check(s)) {
+        return true;
+    }
+
+    vl = vec_full_reg_size(s);
+    dofs = vec_full_reg_offset(s, a->rd);
+    nofs = vec_reg_offset(s, a->rn, a->imm, a->esz);
+
+    for (unsigned i = 0; i < vl; i += 16) {
+        tcg_gen_gvec_dup_mem(a->esz, dofs + i, nofs + i, 16, 16);
+    }
+    return true;
+}
+
 static void do_insr_i64(DisasContext *s, arg_rrr_esz *a, TCGv_i64 val)
 {
     typedef void gen_insr(TCGv_ptr, TCGv_ptr, TCGv_i64, TCGv_i32);
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-90-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/sve.decode      |  2 ++
 target/arm/tcg/translate-sve.c | 49 ++++++++++++++++++++++++++++++++++
 2 files changed, 51 insertions(+)

diff --git a/target/arm/tcg/sve.decode b/target/arm/tcg/sve.decode
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/sve.decode
+++ b/target/arm/tcg/sve.decode
@@ -XXX,XX +XXX,XX @@ DUPQ            00000101 001 imm:3   10 001001 rn:5 rd:5        &rri_esz esz=1
 DUPQ            00000101 001 imm:2  100 001001 rn:5 rd:5        &rri_esz esz=2
 DUPQ            00000101 001 imm:1 1000 001001 rn:5 rd:5        &rri_esz esz=3
 
+EXTQ            00000101 0110 imm:4 001001 rn:5 rd:5            &rri
+
 # SVE insert SIMD&FP scalar register
 INSR_f          00000101 .. 1 10100 001110 ..... .....          @rdn_rm
 
diff --git a/target/arm/tcg/translate-sve.c b/target/arm/tcg/translate-sve.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-sve.c
+++ b/target/arm/tcg/translate-sve.c
@@ -XXX,XX +XXX,XX @@ static bool do_EXT(DisasContext *s, int rd, int rn, int rm, int imm)
 TRANS_FEAT(EXT, aa64_sve, do_EXT, a->rd, a->rn, a->rm, a->imm)
 TRANS_FEAT(EXT_sve2, aa64_sve2, do_EXT, a->rd, a->rn, (a->rn + 1) % 32, a->imm)
 
+static bool trans_EXTQ(DisasContext *s, arg_EXTQ *a)
+{
+    unsigned vl, dofs, sofs0, sofs1, sofs2, imm;
+
+    if (!dc_isar_feature(aa64_sme2p1_or_sve2p1, s)) {
+        return false;
+    }
+    if (!sve_access_check(s)) {
+        return true;
+    }
+
+    imm = a->imm;
+    if (imm == 0) {
+        /* So far we never optimize Zdn with MOVPRFX, so zd = zn is a nop. */
+        return true;
+    }
+
+    vl = vec_full_reg_size(s);
+    dofs = vec_full_reg_offset(s, a->rd);
+    sofs2 = vec_full_reg_offset(s, a->rn);
+
+    if (imm & 8) {
+        sofs0 = dofs + 8;
+        sofs1 = sofs2;
+        sofs2 += 8;
+    } else {
+        sofs0 = dofs;
+        sofs1 = dofs + 8;
+    }
+    imm = (imm & 7) << 3;
+
+    for (unsigned i = 0; i < vl; i += 16) {
+        TCGv_i64 s0 = tcg_temp_new_i64();
+        TCGv_i64 s1 = tcg_temp_new_i64();
+        TCGv_i64 s2 = tcg_temp_new_i64();
+
+        tcg_gen_ld_i64(s0, tcg_env, sofs0 + i);
+        tcg_gen_ld_i64(s1, tcg_env, sofs1 + i);
+        tcg_gen_ld_i64(s2, tcg_env, sofs2 + i);
+
+        tcg_gen_extract2_i64(s0, s0, s1, imm);
+        tcg_gen_extract2_i64(s1, s1, s2, imm);
+
+        tcg_gen_st_i64(s0, tcg_env, dofs + i);
+        tcg_gen_st_i64(s1, tcg_env, dofs + i + 8);
+    }
+    return true;
+}
+
 /*
  *** SVE Permute - Unpredicated Group
  */
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-91-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/helper-sve.h    |  8 +++
 target/arm/tcg/vec_internal.h  | 34 ++++++++++++
 target/arm/tcg/sve.decode      | 17 ++++++
 target/arm/tcg/sve_helper.c    | 50 +++++++++++++++++
 target/arm/tcg/translate-sve.c | 98 ++++++++++++++++++++++++++++++++++
 5 files changed, 207 insertions(+)

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-92-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/helper-sve.h    | 10 ++++++++++
 target/arm/tcg/sve.decode      |  6 ++++++
 target/arm/tcg/sve_helper.c    | 29 +++++++++++++++++++++++++++++
 target/arm/tcg/translate-sve.c | 19 ++++++++++++++++++-
 4 files changed, 63 insertions(+), 1 deletion(-)

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-93-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/helper-sve.h    | 10 ++++++++++
 target/arm/tcg/sve.decode      |  3 +++
 target/arm/tcg/sve_helper.c    | 10 ++++++++++
 target/arm/tcg/translate-sve.c | 14 ++++++++++++++
 4 files changed, 37 insertions(+)

From: Richard Henderson <richard.henderson@linaro.org>

Implement the SVE2p1 consecutive register LD1/ST1,
and the SME2 strided register LD1/ST1.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-94-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/helper-sve.h    |  16 ++
 target/arm/tcg/sve.decode      |  50 ++++
 target/arm/tcg/sve_helper.c    | 493 +++++++++++++++++++++++++++++++++
 target/arm/tcg/translate-sve.c | 103 +++++++
 4 files changed, 662 insertions(+)

diff --git a/target/arm/tcg/helper-sve.h b/target/arm/tcg/helper-sve.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/helper-sve.h
+++ b/target/arm/tcg/helper-sve.h
@@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_3(pmov_pv_d, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
 DEF_HELPER_FLAGS_3(pmov_vp_h, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
 DEF_HELPER_FLAGS_3(pmov_vp_s, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
 DEF_HELPER_FLAGS_3(pmov_vp_d, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
+
+DEF_HELPER_FLAGS_5(sve2p1_ld1bb_c, TCG_CALL_NO_WG, void, env, ptr, tl, i32, i32)
+DEF_HELPER_FLAGS_5(sve2p1_ld1hh_le_c, TCG_CALL_NO_WG, void, env, ptr, tl, i32, i32)
+DEF_HELPER_FLAGS_5(sve2p1_ld1hh_be_c, TCG_CALL_NO_WG, void, env, ptr, tl, i32, i32)
+DEF_HELPER_FLAGS_5(sve2p1_ld1ss_le_c, TCG_CALL_NO_WG, void, env, ptr, tl, i32, i32)
+DEF_HELPER_FLAGS_5(sve2p1_ld1ss_be_c, TCG_CALL_NO_WG, void, env, ptr, tl, i32, i32)
+DEF_HELPER_FLAGS_5(sve2p1_ld1dd_le_c, TCG_CALL_NO_WG, void, env, ptr, tl, i32, i32)
+DEF_HELPER_FLAGS_5(sve2p1_ld1dd_be_c, TCG_CALL_NO_WG, void, env, ptr, tl, i32, i32)
+
+DEF_HELPER_FLAGS_5(sve2p1_st1bb_c, TCG_CALL_NO_WG, void, env, ptr, tl, i32, i32)
+DEF_HELPER_FLAGS_5(sve2p1_st1hh_le_c, TCG_CALL_NO_WG, void, env, ptr, tl, i32, i32)
+DEF_HELPER_FLAGS_5(sve2p1_st1hh_be_c, TCG_CALL_NO_WG, void, env, ptr, tl, i32, i32)
+DEF_HELPER_FLAGS_5(sve2p1_st1ss_le_c, TCG_CALL_NO_WG, void, env, ptr, tl, i32, i32)
+DEF_HELPER_FLAGS_5(sve2p1_st1ss_be_c, TCG_CALL_NO_WG, void, env, ptr, tl, i32, i32)
+DEF_HELPER_FLAGS_5(sve2p1_st1dd_le_c, TCG_CALL_NO_WG, void, env, ptr, tl, i32, i32)
+DEF_HELPER_FLAGS_5(sve2p1_st1dd_be_c, TCG_CALL_NO_WG, void, env, ptr, tl, i32, i32)
diff --git a/target/arm/tcg/sve.decode b/target/arm/tcg/sve.decode
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/sve.decode
+++ b/target/arm/tcg/sve.decode
@@ -XXX,XX +XXX,XX @@ SCLAMP          01000100 .. 0 ..... 110000 ..... .....          @rda_rn_rm
 UCLAMP          01000100 .. 0 ..... 110001 ..... .....          @rda_rn_rm
 
 FCLAMP          01100100 .. 1 ..... 001001 ..... .....          @rda_rn_rm
+
+### SVE2p1 multi-vec contiguous load
+
+&zcrr_ldst      rd png rn rm esz nreg
+&zcri_ldst      rd png rn imm esz nreg
+%png            10:3 !function=plus_8
+%zd_ax2         1:4 !function=times_2
+%zd_ax4         2:3 !function=times_4
+
+LD1_zcrr        10100000000 rm:5 0 esz:2 ... rn:5 .... - \
+                &zcrr_ldst %png rd=%zd_ax2 nreg=2
+LD1_zcrr        10100000000 rm:5 1 esz:2 ... rn:5 ... 0- \
+                &zcrr_ldst %png rd=%zd_ax4 nreg=4
+
+ST1_zcrr        10100000001 rm:5 0 esz:2 ... rn:5 .... - \
+                &zcrr_ldst %png rd=%zd_ax2 nreg=2
+ST1_zcrr        10100000001 rm:5 1 esz:2 ... rn:5 ... 0- \
+                &zcrr_ldst %png rd=%zd_ax4 nreg=4
+
+LD1_zcri        101000000100 imm:s4 0 esz:2 ... rn:5 .... - \
+                &zcri_ldst %png rd=%zd_ax2 nreg=2
+LD1_zcri        101000000100 imm:s4 1 esz:2 ... rn:5 ... 0- \
+                &zcri_ldst %png rd=%zd_ax4 nreg=4
+
+ST1_zcri        101000000110 imm:s4 0 esz:2 ... rn:5 .... - \
+                &zcri_ldst %png rd=%zd_ax2 nreg=2
+ST1_zcri        101000000110 imm:s4 1 esz:2 ... rn:5 ... 0- \
+                &zcri_ldst %png rd=%zd_ax4 nreg=4
+
+# Note: N bit and 0 bit (for nreg4) still mashed in rd.
+# This is handled within gen_ldst_c().
+LD1_zcrr_stride 10100001000 rm:5 0 esz:2 ... rn:5 rd:5 \
+                &zcrr_ldst %png nreg=2
+LD1_zcrr_stride 10100001000 rm:5 1 esz:2 ... rn:5 rd:5 \
+                &zcrr_ldst %png nreg=4
+
+ST1_zcrr_stride 10100001001 rm:5 0 esz:2 ... rn:5 rd:5 \
+                &zcrr_ldst %png nreg=2
+ST1_zcrr_stride 10100001001 rm:5 1 esz:2 ... rn:5 rd:5 \
+                &zcrr_ldst %png nreg=4
+
+LD1_zcri_stride 101000010100 imm:s4 0 esz:2 ... rn:5 rd:5 \
+                &zcri_ldst %png nreg=2
+LD1_zcri_stride 101000010100 imm:s4 1 esz:2 ... rn:5 rd:5 \
+                &zcri_ldst %png nreg=4
+
+ST1_zcri_stride 101000010110 imm:s4 0 esz:2 ... rn:5 rd:5 \
+                &zcri_ldst %png nreg=2
+ST1_zcri_stride 101000010110 imm:s4 1 esz:2 ... rn:5 rd:5 \
+                &zcri_ldst %png nreg=4
diff --git a/target/arm/tcg/sve_helper.c b/target/arm/tcg/sve_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/sve_helper.c
+++ b/target/arm/tcg/sve_helper.c
@@ -XXX,XX +XXX,XX @@ DO_ST1_ZPZ_D(dd_be, zd, MO_64)
 #undef DO_ST1_ZPZ_S
 #undef DO_ST1_ZPZ_D
 
+/*
+ * SVE2.1 consecutive register load/store
+ */
+
+static unsigned sve2p1_cont_ldst_elements(SVEContLdSt *info, vaddr addr,
+                                          uint32_t png, intptr_t reg_max,
+                                          int N, int v_esz)
+{
+    const int esize = 1 << v_esz;
+    intptr_t reg_off_first = -1, reg_off_last = -1, reg_off_split;
+    DecodeCounter p = decode_counter(png, reg_max, v_esz);
+    unsigned b_count = p.count << v_esz;
+    unsigned b_stride = 1 << (v_esz + p.lg2_stride);
+    intptr_t page_split;
+
+    /* Set all of the element indices to -1, and the TLB data to 0. */
+    memset(info, -1, offsetof(SVEContLdSt, page));
+    memset(info->page, 0, sizeof(info->page));
+
+    if (p.invert) {
+        if (b_count >= reg_max * N) {
+            return 0;
+        }
+        reg_off_first = b_count;
+        reg_off_last = reg_max * N - b_stride;
+    } else {
+        if (b_count == 0) {
+            return 0;
+        }
+        reg_off_first = 0;
+        reg_off_last = MIN(b_count - esize, reg_max * N - b_stride);
+    }
+
+    info->reg_off_first[0] = reg_off_first;
+    info->mem_off_first[0] = reg_off_first;
+
+    page_split = -(addr | TARGET_PAGE_MASK);
+    if (reg_off_last + esize <= page_split || reg_off_first >= page_split) {
+        /* The entire operation fits within a single page. */
+        info->reg_off_last[0] = reg_off_last;
+        return b_stride;
+    }
+
+    info->page_split = page_split;
+    reg_off_split = ROUND_DOWN(page_split, esize);
+
+    /*
+     * This is the last full element on the first page, but it is not
+     * necessarily active.  If there is no full element, i.e. the first
+     * active element is the one that's split, this value remains -1.
+     * It is useful as iteration bounds.
+     */
+    if (reg_off_split != 0) {
+        info->reg_off_last[0] = ROUND_DOWN(reg_off_split - esize, b_stride);
+    }
+
+    /* Determine if an unaligned element spans the pages.  */
+    if (page_split & (esize - 1)) {
+        /* It is helpful to know if the split element is active. */
+        if ((reg_off_split & (b_stride - 1)) == 0) {
+            info->reg_off_split = reg_off_split;
+            info->mem_off_split = reg_off_split;
+        }
+        reg_off_split += esize;
+    }
+
+    /*
+     * We do want the first active element on the second page, because
+     * this may affect the address reported in an exception.
+     */
+    reg_off_split = ROUND_UP(reg_off_split, b_stride);
+    if (reg_off_split <= reg_off_last) {
+        info->reg_off_first[1] = reg_off_split;
+        info->mem_off_first[1] = reg_off_split;
+        info->reg_off_last[1] = reg_off_last;
+    }
+    return b_stride;
+}
+
+static void sve2p1_cont_ldst_watchpoints(SVEContLdSt *info, CPUARMState *env,
+                                         target_ulong addr, unsigned estride,
+                                         int esize, int wp_access, uintptr_t ra)
+{
+#ifndef CONFIG_USER_ONLY
+    intptr_t count_off, count_last;
+    int flags0 = info->page[0].flags;
+    int flags1 = info->page[1].flags;
+
+    if (likely(!((flags0 | flags1) & TLB_WATCHPOINT))) {
+        return;
+    }
+
+    /* Indicate that watchpoints are handled. */
+    info->page[0].flags = flags0 & ~TLB_WATCHPOINT;
+    info->page[1].flags = flags1 & ~TLB_WATCHPOINT;
+
+    if (flags0 & TLB_WATCHPOINT) {
+        count_off = info->reg_off_first[0];
+        count_last = info->reg_off_split;
+        if (count_last < 0) {
+            count_last = info->reg_off_last[0];
+        }
+        do {
+            cpu_check_watchpoint(env_cpu(env), addr + count_off,
+                                 esize, info->page[0].attrs, wp_access, ra);
+            count_off += estride;
+        } while (count_off <= count_last);
+    }
+
+    count_off = info->reg_off_first[1];
+    if ((flags1 & TLB_WATCHPOINT) && count_off >= 0) {
+        count_last = info->reg_off_last[1];
+        do {
+            cpu_check_watchpoint(env_cpu(env), addr + count_off,
+                                 esize, info->page[1].attrs,
+                                 wp_access, ra);
+            count_off += estride;
+        } while (count_off <= count_last);
+    }
+#endif
+}
+
+static void sve2p1_cont_ldst_mte_check(SVEContLdSt *info, CPUARMState *env,
+                                       target_ulong addr, unsigned estride,
+                                       int esize, uint32_t mtedesc,
+                                       uintptr_t ra)
+{
+    intptr_t count_off, count_last;
+
+    /*
+     * TODO: estride is always a small power of two, <= 8.
+     * Manipulate the stride within the loops such that
+     *   - first iteration hits addr + off, as required,
+     *   - second iteration hits ALIGN_UP(addr, 16),
+     *   - other iterations advance addr by 16.
+     * This will minimize the probing to once per MTE granule.
+     */
+
+    /* Process the page only if MemAttr == Tagged. */
+    if (info->page[0].tagged) {
+        count_off = info->reg_off_first[0];
+        count_last = info->reg_off_split;
+        if (count_last < 0) {
+            count_last = info->reg_off_last[0];
+        }
+
+        do {
+            mte_check(env, mtedesc, addr + count_off, ra);
+            count_off += estride;
+        } while (count_off <= count_last);
+    }
+
+    count_off = info->reg_off_first[1];
+    if (count_off >= 0 && info->page[1].tagged) {
+        count_last = info->reg_off_last[1];
+        do {
+            mte_check(env, mtedesc, addr + count_off, ra);
+            count_off += estride;
+        } while (count_off <= count_last);
+    }
+}
+
+static inline QEMU_ALWAYS_INLINE
+void sve2p1_ld1_c(CPUARMState *env, ARMVectorReg *zd, const vaddr addr,
+                  uint32_t png, uint32_t desc,
+                  const uintptr_t ra, const MemOp esz,
+                  sve_ldst1_host_fn *host_fn,
+                  sve_ldst1_tlb_fn *tlb_fn)
+{
+    const unsigned N = (desc >> SIMD_DATA_SHIFT) & 1 ? 4 : 2;
+    const unsigned rstride = 1 << ((desc >> (SIMD_DATA_SHIFT + 1)) % 4);
+    uint32_t mtedesc = desc >> (SIMD_DATA_SHIFT + SVE_MTEDESC_SHIFT);
+    const intptr_t reg_max = simd_oprsz(desc);
+    const unsigned esize = 1 << esz;
+    intptr_t count_off, count_last;
+    intptr_t reg_off, reg_last, reg_n;
+    SVEContLdSt info;
+    unsigned estride, flags;
+    void *host;
+
+    estride = sve2p1_cont_ldst_elements(&info, addr, png, reg_max, N, esz);
+    if (estride == 0) {
+        /* The entire predicate was false; no load occurs.  */
+        for (unsigned n = 0; n < N; n++) {
+            memset(zd + n * rstride, 0, reg_max);
+        }
+        return;
+    }
+
+    /* Probe the page(s).  Exit with exception for any invalid page. */
+    sve_cont_ldst_pages(&info, FAULT_ALL, env, addr, MMU_DATA_LOAD, ra);
+
+    /* Handle watchpoints for all active elements. */
+    sve2p1_cont_ldst_watchpoints(&info, env, addr, estride,
+                                 esize, BP_MEM_READ, ra);
+
+    /*
+     * Handle mte checks for all active elements.
+     * Since TBI must be set for MTE, !mtedesc => !mte_active.
+     */
+    if (mtedesc) {
+        sve2p1_cont_ldst_mte_check(&info, env, estride, addr,
+                                   esize, mtedesc, ra);
+    }
+
+    flags = info.page[0].flags | info.page[1].flags;
+    if (unlikely(flags != 0)) {
+        /*
+         * At least one page includes MMIO.
+         * Any bus operation can fail with cpu_transaction_failed,
+         * which for ARM will raise SyncExternal.  Perform the load
+         * into scratch memory to preserve register state until the end.
+         */
+        ARMVectorReg scratch[4] = { };
+
+        count_off = info.reg_off_first[0];
+        count_last = info.reg_off_last[1];
+        if (count_last < 0) {
+            count_last = info.reg_off_split;
+            if (count_last < 0) {
+                count_last = info.reg_off_last[0];
+            }
+        }
+        reg_off = count_off % reg_max;
+        reg_n = count_off / reg_max;
+
+        do {
+            reg_last = MIN(count_last - count_off, reg_max - esize);
+            do {
+                tlb_fn(env, &scratch[reg_n], reg_off, addr + count_off, ra);
+                reg_off += estride;
+                count_off += estride;
+            } while (reg_off <= reg_last);
+            reg_off = 0;
+            reg_n++;
+        } while (count_off <= count_last);
+
+        for (unsigned n = 0; n < N; ++n) {
+            memcpy(&zd[n * rstride], &scratch[n], reg_max);
+        }
+        return;
+    }
+
+    /* The entire operation is in RAM, on valid pages. */
+
+    for (unsigned n = 0; n < N; ++n) {
+        memset(&zd[n * rstride], 0, reg_max);
+    }
+
+    count_off = info.reg_off_first[0];
+    count_last = info.reg_off_last[0];
+    reg_off = count_off % reg_max;
+    reg_n = count_off / reg_max;
+    host = info.page[0].host;
+
+    set_helper_retaddr(ra);
+
+    do {
+        reg_last = MIN(count_last - reg_n * reg_max, reg_max - esize);
+        do {
+            host_fn(&zd[reg_n * rstride], reg_off, host + count_off);
+            reg_off += estride;
+            count_off += estride;
+        } while (reg_off <= reg_last);
+        reg_off = 0;
+        reg_n++;
+    } while (count_off <= count_last);
+
+    clear_helper_retaddr();
+
+    /*
+     * Use the slow path to manage the cross-page misalignment.
+     * But we know this is RAM and cannot trap.
+     */
+    count_off = info.reg_off_split;
+    if (unlikely(count_off >= 0)) {
+        reg_off = count_off % reg_max;
+        reg_n = count_off / reg_max;
+        tlb_fn(env, &zd[reg_n * rstride], reg_off, addr + count_off, ra);
+    }
+
+    count_off = info.reg_off_first[1];
+    if (unlikely(count_off >= 0)) {
+        count_last = info.reg_off_last[1];
+        reg_off = count_off % reg_max;
+        reg_n = count_off / reg_max;
+        host = info.page[1].host;
+
+        set_helper_retaddr(ra);
+
+        do {
+            reg_last = MIN(count_last - reg_n * reg_max, reg_max - esize);
+            do {
+                host_fn(&zd[reg_n * rstride], reg_off, host + count_off);
+                reg_off += estride;
+                count_off += estride;
+            } while (reg_off <= reg_last);
+            reg_off = 0;
+            reg_n++;
+        } while (count_off <= count_last);
+
+        clear_helper_retaddr();
+    }
+}
+
+void HELPER(sve2p1_ld1bb_c)(CPUARMState *env, void *vd, target_ulong addr,
+                            uint32_t png, uint32_t desc)
+{
+    sve2p1_ld1_c(env, vd, addr, png, desc, GETPC(), MO_8,
+                 sve_ld1bb_host, sve_ld1bb_tlb);
+}
+
+#define DO_LD1_2(NAME, ESZ)                                             \
+void HELPER(sve2p1_##NAME##_le_c)(CPUARMState *env, void *vd,           \
+                                  target_ulong addr, uint32_t png,      \
+                                  uint32_t desc)                        \
+{                                                                       \
+    sve2p1_ld1_c(env, vd, addr, png, desc, GETPC(), ESZ,                \
+                 sve_##NAME##_le_host, sve_##NAME##_le_tlb);            \
+}                                                                       \
+void HELPER(sve2p1_##NAME##_be_c)(CPUARMState *env, void *vd,           \
+                                  target_ulong addr, uint32_t png,      \
+                                  uint32_t desc)                        \
+{                                                                       \
+    sve2p1_ld1_c(env, vd, addr, png, desc, GETPC(), ESZ,                \
+                 sve_##NAME##_be_host, sve_##NAME##_be_tlb);            \
+}
+
+DO_LD1_2(ld1hh, MO_16)
+DO_LD1_2(ld1ss, MO_32)
+DO_LD1_2(ld1dd, MO_64)
+
+#undef DO_LD1_2
+
+static inline QEMU_ALWAYS_INLINE
+void sve2p1_st1_c(CPUARMState *env, ARMVectorReg *zd, const vaddr addr,
+                  uint32_t png, uint32_t desc,
+                  const uintptr_t ra, const int esz,
+                  sve_ldst1_host_fn *host_fn,
+                  sve_ldst1_tlb_fn *tlb_fn)
+{
+    const unsigned N = (desc >> SIMD_DATA_SHIFT) & 1 ? 4 : 2;
+    const unsigned rstride = 1 << ((desc >> (SIMD_DATA_SHIFT + 1)) % 4);
+    uint32_t mtedesc = desc >> (SIMD_DATA_SHIFT + SVE_MTEDESC_SHIFT);
+    const intptr_t reg_max = simd_oprsz(desc);
+    const unsigned esize = 1 << esz;
+    intptr_t count_off, count_last;
+    intptr_t reg_off, reg_last, reg_n;
+    SVEContLdSt info;
+    unsigned estride, flags;
+    void *host;
+
+    estride = sve2p1_cont_ldst_elements(&info, addr, png, reg_max, N, esz);
+    if (estride == 0) {
+        /* The entire predicate was false; no store occurs.  */
+        return;
+    }
+
+    /* Probe the page(s).  Exit with exception for any invalid page. */
+    sve_cont_ldst_pages(&info, FAULT_ALL, env, addr, MMU_DATA_STORE, ra);
+
+    /* Handle watchpoints for all active elements. */
+    sve2p1_cont_ldst_watchpoints(&info, env, addr, estride,
+                                 esize, BP_MEM_WRITE, ra);
+
+    /*
+     * Handle mte checks for all active elements.
+     * Since TBI must be set for MTE, !mtedesc => !mte_active.
+     */
+    if (mtedesc) {
+        sve2p1_cont_ldst_mte_check(&info, env, estride, addr,
+                                   esize, mtedesc, ra);
+    }
+
+    flags = info.page[0].flags | info.page[1].flags;
+    if (unlikely(flags != 0)) {
+        /*
+         * At least one page includes MMIO.
+         * Any bus operation can fail with cpu_transaction_failed,
+         * which for ARM will raise SyncExternal.  Perform the load
+         * into scratch memory to preserve register state until the end.
+         */
+        count_off = info.reg_off_first[0];
+        count_last = info.reg_off_last[1];
+        if (count_last < 0) {
+            count_last = info.reg_off_split;
+            if (count_last < 0) {
+                count_last = info.reg_off_last[0];
+            }
+        }
+        reg_off = count_off % reg_max;
+        reg_n = count_off / reg_max;
+
+        do {
+            reg_last = MIN(count_last - count_off, reg_max - esize);
+            do {
+                tlb_fn(env, &zd[reg_n * rstride], reg_off, addr + count_off, ra);
+                reg_off += estride;
+                count_off += estride;
+            } while (reg_off <= reg_last);
+            reg_off = 0;
+            reg_n++;
+        } while (count_off <= count_last);
+        return;
+    }
+
+    /* The entire operation is in RAM, on valid pages. */
+
+    count_off = info.reg_off_first[0];
+    count_last = info.reg_off_last[0];
+    reg_off = count_off % reg_max;
+    reg_n = count_off / reg_max;
+    host = info.page[0].host;
+
+    set_helper_retaddr(ra);
+
+    do {
+        reg_last = MIN(count_last - reg_n * reg_max, reg_max - esize);
+        do {
+            host_fn(&zd[reg_n * rstride], reg_off, host + count_off);
+            reg_off += estride;
+            count_off += estride;
+        } while (reg_off <= reg_last);
+        reg_off = 0;
+        reg_n++;
+    } while (count_off <= count_last);
+
+    clear_helper_retaddr();
+
+    /*
+     * Use the slow path to manage the cross-page misalignment.
+     * But we know this is RAM and cannot trap.
+     */
+    count_off = info.reg_off_split;
+    if (unlikely(count_off >= 0)) {
+        reg_off = count_off % reg_max;
+        reg_n = count_off / reg_max;
+        tlb_fn(env, &zd[reg_n * rstride], reg_off, addr + count_off, ra);
+    }
+
+    count_off = info.reg_off_first[1];
+    if (unlikely(count_off >= 0)) {
+        count_last = info.reg_off_last[1];
+        reg_off = count_off % reg_max;
+        reg_n = count_off / reg_max;
+        host = info.page[1].host;
+
+        set_helper_retaddr(ra);
+
+        do {
+            reg_last = MIN(count_last - reg_n * reg_max, reg_max - esize);
+            do {
+                host_fn(&zd[reg_n * rstride], reg_off, host + count_off);
+                reg_off += estride;
+                count_off += estride;
+            } while (reg_off <= reg_last);
+            reg_off = 0;
+            reg_n++;
+        } while (count_off <= count_last);
+
+        clear_helper_retaddr();
+    }
+}
+
+void HELPER(sve2p1_st1bb_c)(CPUARMState *env, void *vd, target_ulong addr,
+                           uint32_t png, uint32_t desc)
+{
+    sve2p1_st1_c(env, vd, addr, png, desc, GETPC(), MO_8,
+                 sve_st1bb_host, sve_st1bb_tlb);
+}
+
+#define DO_ST1_2(NAME, ESZ)                                             \
+void HELPER(sve2p1_##NAME##_le_c)(CPUARMState *env, void *vd,           \
+                                  target_ulong addr, uint32_t png,      \
+                                  uint32_t desc)                        \
+{                                                                       \
+    sve2p1_st1_c(env, vd, addr, png, desc, GETPC(), ESZ,                \
+                 sve_##NAME##_le_host, sve_##NAME##_le_tlb);            \
+}                                                                       \
+void HELPER(sve2p1_##NAME##_be_c)(CPUARMState *env, void *vd,           \
+                                  target_ulong addr, uint32_t png,      \
+                                  uint32_t desc)                        \
+{                                                                       \
+    sve2p1_st1_c(env, vd, addr, png, desc, GETPC(), ESZ,                \
+                 sve_##NAME##_be_host, sve_##NAME##_be_tlb);            \
+}
+
+DO_ST1_2(st1hh, MO_16)
+DO_ST1_2(st1ss, MO_32)
+DO_ST1_2(st1dd, MO_64)
+
+#undef DO_ST1_2
+
 void HELPER(sve2_eor3)(void *vd, void *vn, void *vm, void *vk, uint32_t desc)
 {
     intptr_t i, opr_sz = simd_oprsz(desc) / 8;
diff --git a/target/arm/tcg/translate-sve.c b/target/arm/tcg/translate-sve.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-sve.c
+++ b/target/arm/tcg/translate-sve.c
@@ -XXX,XX +XXX,XX @@ TRANS_FEAT(UQCVTN_sh, aa64_sme2_or_sve2p1, gen_gvec_ool_zz,
            gen_helper_sme2_uqcvtn_sh, a->rd, a->rn, 0)
 TRANS_FEAT(SQCVTUN_sh, aa64_sme2_or_sve2p1, gen_gvec_ool_zz,
            gen_helper_sme2_sqcvtun_sh, a->rd, a->rn, 0)
+
+static bool gen_ldst_c(DisasContext *s, TCGv_i64 addr, int zd, int png,
+                       MemOp esz, bool is_write, int n, bool strided)
+{
+    typedef void ldst_c_fn(TCGv_env, TCGv_ptr, TCGv_i64,
+                           TCGv_i32, TCGv_i32);
+    static ldst_c_fn * const f_ldst[2][2][4] = {
+        { { gen_helper_sve2p1_ld1bb_c,
+            gen_helper_sve2p1_ld1hh_le_c,
+            gen_helper_sve2p1_ld1ss_le_c,
+            gen_helper_sve2p1_ld1dd_le_c, },
+          { gen_helper_sve2p1_ld1bb_c,
+            gen_helper_sve2p1_ld1hh_be_c,
+            gen_helper_sve2p1_ld1ss_be_c,
+            gen_helper_sve2p1_ld1dd_be_c, } },
+
+        { { gen_helper_sve2p1_st1bb_c,
+            gen_helper_sve2p1_st1hh_le_c,
+            gen_helper_sve2p1_st1ss_le_c,
+            gen_helper_sve2p1_st1dd_le_c, },
+          { gen_helper_sve2p1_st1bb_c,
+            gen_helper_sve2p1_st1hh_be_c,
+            gen_helper_sve2p1_st1ss_be_c,
+            gen_helper_sve2p1_st1dd_be_c, } }
+    };
+
+    TCGv_i32 t_png, t_desc;
+    TCGv_ptr t_zd;
+    uint32_t desc, lg2_rstride = 0;
+    bool be = s->be_data == MO_BE;
+
+    assert(n == 2 || n == 4);
+    if (strided) {
+        lg2_rstride = 3;
+        if (n == 4) {
+            /* Validate ZD alignment. */
+            if (zd & 4) {
+                return false;
+            }
+            lg2_rstride = 2;
+        }
+        /* Ignore non-temporal bit */
+        zd &= ~8;
+    }
+
+    if (strided || !dc_isar_feature(aa64_sve2p1, s)
+        ? !sme_sm_enabled_check(s)
+        : !sve_access_check(s)) {
+        return true;
+    }
+
+    if (!s->mte_active[0]) {
+        addr = clean_data_tbi(s, addr);
+    }
+
+    desc = n == 2 ? 0 : 1;
+    desc = desc | (lg2_rstride << 1);
+    desc = make_svemte_desc(s, vec_full_reg_size(s), 1, esz, is_write, desc);
+    t_desc = tcg_constant_i32(desc);
+
+    t_png = tcg_temp_new_i32();
+    tcg_gen_ld16u_i32(t_png, tcg_env,
+                      pred_full_reg_offset(s, png) ^
+                      (HOST_BIG_ENDIAN ? 6 : 0));
+
+    t_zd = tcg_temp_new_ptr();
+    tcg_gen_addi_ptr(t_zd, tcg_env, vec_full_reg_offset(s, zd));
+
+    f_ldst[is_write][be][esz](tcg_env, t_zd, addr, t_png, t_desc);
+    return true;
+}
+
+static bool gen_ldst_zcrr_c(DisasContext *s, arg_zcrr_ldst *a,
+                            bool is_write, bool strided)
+{
+    TCGv_i64 addr = tcg_temp_new_i64();
+
+    tcg_gen_shli_i64(addr, cpu_reg(s, a->rm), a->esz);
+    tcg_gen_add_i64(addr, addr, cpu_reg_sp(s, a->rn));
+    return gen_ldst_c(s, addr, a->rd, a->png, a->esz, is_write,
+                      a->nreg, strided);
+}
+
+static bool gen_ldst_zcri_c(DisasContext *s, arg_zcri_ldst *a,
+                            bool is_write, bool strided)
+{
+    TCGv_i64 addr = tcg_temp_new_i64();
+
+    tcg_gen_addi_i64(addr, cpu_reg_sp(s, a->rn),
+                     a->imm * a->nreg * vec_full_reg_size(s));
+    return gen_ldst_c(s, addr, a->rd, a->png, a->esz, is_write,
+                      a->nreg, strided);
+}
+
+TRANS_FEAT(LD1_zcrr, aa64_sme2_or_sve2p1, gen_ldst_zcrr_c, a, false, false)
+TRANS_FEAT(LD1_zcri, aa64_sme2_or_sve2p1, gen_ldst_zcri_c, a, false, false)
+TRANS_FEAT(ST1_zcrr, aa64_sme2_or_sve2p1, gen_ldst_zcrr_c, a, true, false)
+TRANS_FEAT(ST1_zcri, aa64_sme2_or_sve2p1, gen_ldst_zcri_c, a, true, false)
+
+TRANS_FEAT(LD1_zcrr_stride, aa64_sme2, gen_ldst_zcrr_c, a, false, true)
+TRANS_FEAT(LD1_zcri_stride, aa64_sme2, gen_ldst_zcri_c, a, false, true)
+TRANS_FEAT(ST1_zcrr_stride, aa64_sme2, gen_ldst_zcrr_c, a, true, true)
+TRANS_FEAT(ST1_zcri_stride, aa64_sme2, gen_ldst_zcri_c, a, true, true)
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

The msz > esz encodings are reserved, and some of
them are about to be reused.  Split these patterns
so that the new insns do not overlap.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-95-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/sve.decode | 26 ++++++++++++++++++--------
 1 file changed, 18 insertions(+), 8 deletions(-)

diff --git a/target/arm/tcg/sve.decode b/target/arm/tcg/sve.decode
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/sve.decode
+++ b/target/arm/tcg/sve.decode
@@ -XXX,XX +XXX,XX @@
 
 # Stores; user must fill in ESZ, MSZ, NREG as needed.
 @rprr_store         ....... ..    ..     rm:5 ... pg:3 rn:5 rd:5    &rprr_store
-@rpri_store_msz     ....... msz:2 .. . imm:s4 ... pg:3 rn:5 rd:5    &rpri_store
+@rpri_store         ....... ..    .. . imm:s4 ... pg:3 rn:5 rd:5    &rpri_store
 @rprr_store_esz_n0  ....... ..    esz:2  rm:5 ... pg:3 rn:5 rd:5 \
                     &rprr_store nreg=0
 @rprr_scatter_store ....... msz:2 ..     rm:5 ... pg:3 rn:5 rd:5 \
@@ -XXX,XX +XXX,XX @@ STR_zri         1110010 11 0.     ..... 010 ... ..... .....     @rd_rn_i9
 
 # SVE contiguous store (scalar plus immediate)
 # ST1B, ST1H, ST1W, ST1D; require msz <= esz
-ST_zpri         1110010 .. esz:2  0.... 111 ... ..... ..... \
-                @rpri_store_msz nreg=0
+ST_zpri         1110010 00 esz:2  0.... 111 ... ..... ..... \
+                @rpri_store msz=0 nreg=0
+ST_zpri         1110010 01 esz:2  0.... 111 ... ..... ..... \
+                @rpri_store msz=1 nreg=0
+ST_zpri         1110010 10 10     0.... 111 ... ..... ..... \
+                @rpri_store msz=2 esz=2 nreg=0
+ST_zpri         1110010 10 11     0.... 111 ... ..... ..... \
+                @rpri_store msz=2 esz=3 nreg=0
+ST_zpri         1110010 11 11     0.... 111 ... ..... ..... \
+                @rpri_store msz=3 esz=3 nreg=0
 
 # SVE contiguous store (scalar plus scalar)
 # ST1B, ST1H, ST1W, ST1D; require msz <= esz
@@ -XXX,XX +XXX,XX @@ ST_zprr         1110010 00 ..     ..... 010 ... ..... ..... \
                 @rprr_store_esz_n0 msz=0
 ST_zprr         1110010 01 ..     ..... 010 ... ..... ..... \
                 @rprr_store_esz_n0 msz=1
-ST_zprr         1110010 10 ..     ..... 010 ... ..... ..... \
-                @rprr_store_esz_n0 msz=2
+ST_zprr         1110010 10 10     ..... 010 ... ..... ..... \
+                @rprr_store msz=2 esz=2 nreg=0
+ST_zprr         1110010 10 11     ..... 010 ... ..... ..... \
+                @rprr_store msz=2 esz=3 nreg=0
 ST_zprr         1110010 11 11     ..... 010 ... ..... ..... \
                 @rprr_store msz=3 esz=3 nreg=0
 
 # SVE contiguous non-temporal store (scalar plus immediate)  (nreg == 0)
 # SVE store multiple structures (scalar plus immediate)      (nreg != 0)
 ST_zpri         1110010 .. nreg:2 1.... 111 ... ..... ..... \
-                @rpri_store_msz esz=%size_23
+                @rpri_store msz=%size_23 esz=%size_23
 
 # SVE contiguous non-temporal store (scalar plus scalar)     (nreg == 0)
 # SVE store multiple structures (scalar plus scalar)         (nreg != 0)
-ST_zprr         1110010 msz:2 nreg:2 ..... 011 ... ..... ..... \
-                @rprr_store esz=%size_23
+ST_zprr         1110010 .. nreg:2 ..... 011 ... ..... ..... \
+                @rprr_store msz=%size_23 esz=%size_23
 
 # SVE 32-bit scatter store (scalar plus 32-bit scaled offsets)
 # Require msz > 0 && msz <= esz.
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-96-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/helper-sve.h        |  22 +++++
 target/arm/tcg/sve_ldst_internal.h |  26 ++++++
 target/arm/tcg/sve.decode          |  20 +++++
 target/arm/tcg/sve_helper.c        |   6 ++
 target/arm/tcg/translate-sve.c     | 136 +++++++++++++++++++++++------
 5 files changed, 183 insertions(+), 27 deletions(-)

From: Richard Henderson <richard.henderson@linaro.org>

Move from sme_helper.c to the shared header.
Add a comment noting the lack of atomicity.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-97-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/sve_ldst_internal.h | 63 ++++++++++++++++++++++++++++++
 target/arm/tcg/sme_helper.c        | 44 +++------------------
 2 files changed, 69 insertions(+), 38 deletions(-)

diff --git a/target/arm/tcg/sve_ldst_internal.h b/target/arm/tcg/sve_ldst_internal.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/sve_ldst_internal.h
+++ b/target/arm/tcg/sve_ldst_internal.h
@@ -XXX,XX +XXX,XX @@ DO_LD_PRIM_3(ld1dqu_le, ld1dd_le)
 #define sve_st1dq_be_tlb   sve_st1dd_be_tlb
 #define sve_st1dq_le_tlb   sve_st1dd_le_tlb
 
+/*
+ * The ARMVectorReg elements are stored in host-endian 64-bit units.
+ * For 128-bit quantities, the sequence defined by the Elem[] pseudocode
+ * corresponds to storing the two 64-bit pieces in little-endian order.
+ */
+/* FIXME: Nothing in this file makes any effort at atomicity. */
+
+static inline void sve_ld1qq_be_host(void *vd, intptr_t reg_off, void *host)
+{
+    sve_ld1dd_be_host(vd, reg_off + 8, host);
+    sve_ld1dd_be_host(vd, reg_off, host + 8);
+}
+
+static inline void sve_ld1qq_le_host(void *vd, intptr_t reg_off, void *host)
+{
+    sve_ld1dd_le_host(vd, reg_off, host);
+    sve_ld1dd_le_host(vd, reg_off + 8, host + 8);
+}
+
+static inline void
+sve_ld1qq_be_tlb(CPUARMState *env, void *vd, intptr_t reg_off,
+                 target_ulong addr, uintptr_t ra)
+{
+    sve_ld1dd_be_tlb(env, vd, reg_off + 8, addr, ra);
+    sve_ld1dd_be_tlb(env, vd, reg_off, addr + 8, ra);
+}
+
+static inline void
+sve_ld1qq_le_tlb(CPUARMState *env, void *vd, intptr_t reg_off,
+                 target_ulong addr, uintptr_t ra)
+{
+    sve_ld1dd_le_tlb(env, vd, reg_off, addr, ra);
+    sve_ld1dd_le_tlb(env, vd, reg_off + 8, addr + 8, ra);
+}
+
+static inline void sve_st1qq_be_host(void *vd, intptr_t reg_off, void *host)
+{
+    sve_st1dd_be_host(vd, reg_off + 8, host);
+    sve_st1dd_be_host(vd, reg_off, host + 8);
+}
+
+static inline void sve_st1qq_le_host(void *vd, intptr_t reg_off, void *host)
+{
+    sve_st1dd_le_host(vd, reg_off, host);
+    sve_st1dd_le_host(vd, reg_off + 8, host + 8);
+}
+
+static inline void
+sve_st1qq_be_tlb(CPUARMState *env, void *vd, intptr_t reg_off,
+                 target_ulong addr, uintptr_t ra)
+{
+    sve_st1dd_be_tlb(env, vd, reg_off + 8, addr, ra);
+    sve_st1dd_be_tlb(env, vd, reg_off, addr + 8, ra);
+}
+
+static inline void
+sve_st1qq_le_tlb(CPUARMState *env, void *vd, intptr_t reg_off,
+                 target_ulong addr, uintptr_t ra)
+{
+    sve_st1dd_le_tlb(env, vd, reg_off, addr, ra);
+    sve_st1dd_le_tlb(env, vd, reg_off + 8, addr + 8, ra);
+}
+
 #undef DO_LD_TLB
 #undef DO_ST_TLB
 #undef DO_LD_HOST
diff --git a/target/arm/tcg/sme_helper.c b/target/arm/tcg/sme_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/sme_helper.c
+++ b/target/arm/tcg/sme_helper.c
@@ -XXX,XX +XXX,XX @@ static inline void sme_##NAME##_v_tlb(CPUARMState *env, void *za,           \
     TLB(env, useronly_clean_ptr(addr), val, ra);                            \
 }
 
-/*
- * The ARMVectorReg elements are stored in host-endian 64-bit units.
- * For 128-bit quantities, the sequence defined by the Elem[] pseudocode
- * corresponds to storing the two 64-bit pieces in little-endian order.
- */
-#define DO_LDQ(HNAME, VNAME, BE, HOST, TLB)                                 \
-static inline void HNAME##_host(void *za, intptr_t off, void *host)         \
-{                                                                           \
-    uint64_t val0 = HOST(host), val1 = HOST(host + 8);                      \
-    uint64_t *ptr = za + off;                                               \
-    ptr[0] = BE ? val1 : val0, ptr[1] = BE ? val0 : val1;                   \
-}                                                                           \
+#define DO_LDQ(HNAME, VNAME) \
 static inline void VNAME##_v_host(void *za, intptr_t off, void *host)       \
 {                                                                           \
     HNAME##_host(za, tile_vslice_offset(off), host);                        \
 }                                                                           \
-static inline void HNAME##_tlb(CPUARMState *env, void *za, intptr_t off,    \
-                               target_ulong addr, uintptr_t ra)             \
-{                                                                           \
-    uint64_t val0 = TLB(env, useronly_clean_ptr(addr), ra);                 \
-    uint64_t val1 = TLB(env, useronly_clean_ptr(addr + 8), ra);             \
-    uint64_t *ptr = za + off;                                               \
-    ptr[0] = BE ? val1 : val0, ptr[1] = BE ? val0 : val1;                   \
-}                                                                           \
 static inline void VNAME##_v_tlb(CPUARMState *env, void *za, intptr_t off,  \
                                target_ulong addr, uintptr_t ra)             \
 {                                                                           \
     HNAME##_tlb(env, za, tile_vslice_offset(off), addr, ra);                \
 }
 
-#define DO_STQ(HNAME, VNAME, BE, HOST, TLB)                                 \
-static inline void HNAME##_host(void *za, intptr_t off, void *host)         \
-{                                                                           \
-    uint64_t *ptr = za + off;                                               \
-    HOST(host, ptr[BE]);                                                    \
-    HOST(host + 8, ptr[!BE]);                                               \
-}                                                                           \
+#define DO_STQ(HNAME, VNAME) \
 static inline void VNAME##_v_host(void *za, intptr_t off, void *host)       \
 {                                                                           \
     HNAME##_host(za, tile_vslice_offset(off), host);                        \
 }                                                                           \
-static inline void HNAME##_tlb(CPUARMState *env, void *za, intptr_t off,    \
-                               target_ulong addr, uintptr_t ra)             \
-{                                                                           \
-    uint64_t *ptr = za + off;                                               \
-    TLB(env, useronly_clean_ptr(addr), ptr[BE], ra);                        \
-    TLB(env, useronly_clean_ptr(addr + 8), ptr[!BE], ra);                   \
-}                                                                           \
 static inline void VNAME##_v_tlb(CPUARMState *env, void *za, intptr_t off,  \
                                target_ulong addr, uintptr_t ra)             \
 {                                                                           \
@@ -XXX,XX +XXX,XX @@ DO_LD(ld1s_le, uint32_t, ldl_le_p, cpu_ldl_le_data_ra)
 DO_LD(ld1d_be, uint64_t, ldq_be_p, cpu_ldq_be_data_ra)
 DO_LD(ld1d_le, uint64_t, ldq_le_p, cpu_ldq_le_data_ra)
 
-DO_LDQ(sve_ld1qq_be, sme_ld1q_be, 1, ldq_be_p, cpu_ldq_be_data_ra)
-DO_LDQ(sve_ld1qq_le, sme_ld1q_le, 0, ldq_le_p, cpu_ldq_le_data_ra)
+DO_LDQ(sve_ld1qq_be, sme_ld1q_be)
+DO_LDQ(sve_ld1qq_le, sme_ld1q_le)
 
 DO_ST(st1b, uint8_t, stb_p, cpu_stb_data_ra)
 DO_ST(st1h_be, uint16_t, stw_be_p, cpu_stw_be_data_ra)
@@ -XXX,XX +XXX,XX @@ DO_ST(st1s_le, uint32_t, stl_le_p, cpu_stl_le_data_ra)
 DO_ST(st1d_be, uint64_t, stq_be_p, cpu_stq_be_data_ra)
 DO_ST(st1d_le, uint64_t, stq_le_p, cpu_stq_le_data_ra)
 
-DO_STQ(sve_st1qq_be, sme_st1q_be, 1, stq_be_p, cpu_stq_be_data_ra)
-DO_STQ(sve_st1qq_le, sme_st1q_le, 0, stq_le_p, cpu_stq_le_data_ra)
+DO_STQ(sve_st1qq_be, sme_st1q_be)
+DO_STQ(sve_st1qq_le, sme_st1q_le)
 
 #undef DO_LD
 #undef DO_ST
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-98-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/helper-sve.h    |  32 +++++++++
 target/arm/tcg/sve.decode      |  31 +++++++++
 target/arm/tcg/sve_helper.c    |   8 +++
 target/arm/tcg/translate-sve.c | 116 ++++++++++++++++++++++++---------
 4 files changed, 156 insertions(+), 31 deletions(-)

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-99-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/helper-sve.h    | 16 ++++++++++++++++
 target/arm/tcg/sve.decode      |  8 ++++++++
 target/arm/tcg/sve_helper.c    |  6 ++++++
 target/arm/tcg/translate-sve.c | 34 ++++++++++++++++++++++++++++++++--
 4 files changed, 62 insertions(+), 2 deletions(-)

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-100-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/helper-sme.h    |  6 ++++
 target/arm/tcg/sme.decode      | 36 ++++++++++++++++++++
 target/arm/tcg/sme_helper.c    | 60 ++++++++++++++++++++++++++++++++++
 target/arm/tcg/translate-sme.c | 46 +++++++++++++++++++-------
 4 files changed, 137 insertions(+), 11 deletions(-)

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-101-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/helper.h        | 24 ++++++++++
 target/arm/tcg/sme.decode      | 42 ++++++++++++++++
 target/arm/tcg/translate-sme.c | 56 ++++++++++++++++++++++
 target/arm/tcg/vec_helper.c    | 88 ++++++++++++++++++++++++++++++++++
 4 files changed, 210 insertions(+)

diff --git a/target/arm/tcg/helper.h b/target/arm/tcg/helper.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/helper.h
+++ b/target/arm/tcg/helper.h
@@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_4(gvec_uminp_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
 
 DEF_HELPER_FLAGS_3(gvec_urecpe_s, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
 DEF_HELPER_FLAGS_3(gvec_ursqrte_s, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
+
+DEF_HELPER_FLAGS_4(sme2_luti2_1b, TCG_CALL_NO_RWG, void, ptr, ptr, env, i32)
+DEF_HELPER_FLAGS_4(sme2_luti2_1h, TCG_CALL_NO_RWG, void, ptr, ptr, env, i32)
+DEF_HELPER_FLAGS_4(sme2_luti2_1s, TCG_CALL_NO_RWG, void, ptr, ptr, env, i32)
+
+DEF_HELPER_FLAGS_4(sme2_luti2_2b, TCG_CALL_NO_RWG, void, ptr, ptr, env, i32)
+DEF_HELPER_FLAGS_4(sme2_luti2_2h, TCG_CALL_NO_RWG, void, ptr, ptr, env, i32)
+DEF_HELPER_FLAGS_4(sme2_luti2_2s, TCG_CALL_NO_RWG, void, ptr, ptr, env, i32)
+
+DEF_HELPER_FLAGS_4(sme2_luti2_4b, TCG_CALL_NO_RWG, void, ptr, ptr, env, i32)
+DEF_HELPER_FLAGS_4(sme2_luti2_4h, TCG_CALL_NO_RWG, void, ptr, ptr, env, i32)
+DEF_HELPER_FLAGS_4(sme2_luti2_4s, TCG_CALL_NO_RWG, void, ptr, ptr, env, i32)
+
+DEF_HELPER_FLAGS_4(sme2_luti4_1b, TCG_CALL_NO_RWG, void, ptr, ptr, env, i32)
+DEF_HELPER_FLAGS_4(sme2_luti4_1h, TCG_CALL_NO_RWG, void, ptr, ptr, env, i32)
+DEF_HELPER_FLAGS_4(sme2_luti4_1s, TCG_CALL_NO_RWG, void, ptr, ptr, env, i32)
+
+DEF_HELPER_FLAGS_4(sme2_luti4_2b, TCG_CALL_NO_RWG, void, ptr, ptr, env, i32)
+DEF_HELPER_FLAGS_4(sme2_luti4_2h, TCG_CALL_NO_RWG, void, ptr, ptr, env, i32)
+DEF_HELPER_FLAGS_4(sme2_luti4_2s, TCG_CALL_NO_RWG, void, ptr, ptr, env, i32)
+
+DEF_HELPER_FLAGS_4(sme2_luti4_4b, TCG_CALL_NO_RWG, void, ptr, ptr, env, i32)
+DEF_HELPER_FLAGS_4(sme2_luti4_4h, TCG_CALL_NO_RWG, void, ptr, ptr, env, i32)
+DEF_HELPER_FLAGS_4(sme2_luti4_4s, TCG_CALL_NO_RWG, void, ptr, ptr, env, i32)
diff --git a/target/arm/tcg/sme.decode b/target/arm/tcg/sme.decode
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/sme.decode
+++ b/target/arm/tcg/sme.decode
@@ -XXX,XX +XXX,XX @@ ZERO_za         11000000 000011 110 .. 0000000000 00.   \
                 &zero_za ngrp=2 nvec=4 rv=%mova_rv off=%off1_x4
 ZERO_za         11000000 000011 111 .. 0000000000 00.   \
                 &zero_za ngrp=4 nvec=4 rv=%mova_rv off=%off1_x4
+
+### SME Lookup Table Read
+
+&lut            zd zn idx
+
+# LUTI2, consecutive
+LUTI2_c_1b      1100 0000 1100 11 idx:4    00 00 zn:5 zd:5      &lut
+LUTI2_c_1h      1100 0000 1100 11 idx:4    01 00 zn:5 zd:5      &lut
+LUTI2_c_1s      1100 0000 1100 11 idx:4    10 00 zn:5 zd:5      &lut
+
+LUTI2_c_2b      1100 0000 1000 11 idx:3  1 00 00 zn:5 .... 0    &lut zd=%zd_ax2
+LUTI2_c_2h      1100 0000 1000 11 idx:3  1 01 00 zn:5 .... 0    &lut zd=%zd_ax2
+LUTI2_c_2s      1100 0000 1000 11 idx:3  1 10 00 zn:5 .... 0    &lut zd=%zd_ax2
+
+LUTI2_c_4b      1100 0000 1000 11 idx:2 10 00 00 zn:5 ... 00    &lut zd=%zd_ax4
+LUTI2_c_4h      1100 0000 1000 11 idx:2 10 01 00 zn:5 ... 00    &lut zd=%zd_ax4
+LUTI2_c_4s      1100 0000 1000 11 idx:2 10 10 00 zn:5 ... 00    &lut zd=%zd_ax4
+
+# LUTI2, strided (must check zd alignment)
+LUTI2_s_2b      1100 0000 1001 11 idx:3  1 00 00 zn:5 zd:5      &lut
+LUTI2_s_2h      1100 0000 1001 11 idx:3  1 01 00 zn:5 zd:5      &lut
+
+LUTI2_s_4b      1100 0000 1001 11 idx:2 10 00 00 zn:5 zd:5      &lut
+LUTI2_s_4h      1100 0000 1001 11 idx:2 10 01 00 zn:5 zd:5      &lut
+
+# LUTI4, consecutive
+LUTI4_c_1b      1100 0000 1100 101 idx:3    00 00 zn:5 zd:5     &lut
+LUTI4_c_1h      1100 0000 1100 101 idx:3    01 00 zn:5 zd:5     &lut
+LUTI4_c_1s      1100 0000 1100 101 idx:3    10 00 zn:5 zd:5     &lut
+
+LUTI4_c_2b      1100 0000 1000 101 idx:2  1 00 00 zn:5 .... 0   &lut zd=%zd_ax2
+LUTI4_c_2h      1100 0000 1000 101 idx:2  1 01 00 zn:5 .... 0   &lut zd=%zd_ax2
+LUTI4_c_2s      1100 0000 1000 101 idx:2  1 10 00 zn:5 .... 0   &lut zd=%zd_ax2
+
+LUTI4_c_4h      1100 0000 1000 101 idx:1 10 01 00 zn:5 ... 00   &lut zd=%zd_ax4
+LUTI4_c_4s      1100 0000 1000 101 idx:1 10 10 00 zn:5 ... 00   &lut zd=%zd_ax4
+
+# LUTI4, strided (must check zd alignment)
+LUTI4_s_2b      1100 0000 1001 101 idx:2  1 00 00 zn:5 zd:5     &lut
+LUTI4_s_2h      1100 0000 1001 101 idx:2  1 01 00 zn:5 zd:5     &lut
+
+LUTI4_s_4h      1100 0000 1001 101 idx:1 10 01 00 zn:5 zd:5     &lut
diff --git a/target/arm/tcg/translate-sme.c b/target/arm/tcg/translate-sme.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-sme.c
+++ b/target/arm/tcg/translate-sme.c
@@ -XXX,XX +XXX,XX @@ static bool trans_SEL(DisasContext *s, arg_SEL *a)
     }
     return true;
 }
+
+static bool do_lut(DisasContext *s, arg_lut *a,
+                   gen_helper_gvec_2_ptr *fn, bool strided)
+{
+    if (sme_sm_enabled_check(s) && sme2_zt0_enabled_check(s)) {
+        int svl = streaming_vec_reg_size(s);
+        tcg_gen_gvec_2_ptr(vec_full_reg_offset(s, a->zd),
+                           vec_full_reg_offset(s, a->zn),
+                           tcg_env, svl, svl, strided | (a->idx << 1), fn);
+    }
+    return true;
+}
+
+TRANS_FEAT(LUTI2_c_1b, aa64_sme2, do_lut, a, gen_helper_sme2_luti2_1b, false)
+TRANS_FEAT(LUTI2_c_1h, aa64_sme2, do_lut, a, gen_helper_sme2_luti2_1h, false)
+TRANS_FEAT(LUTI2_c_1s, aa64_sme2, do_lut, a, gen_helper_sme2_luti2_1s, false)
+
+TRANS_FEAT(LUTI2_c_2b, aa64_sme2, do_lut, a, gen_helper_sme2_luti2_2b, false)
+TRANS_FEAT(LUTI2_c_2h, aa64_sme2, do_lut, a, gen_helper_sme2_luti2_2h, false)
+TRANS_FEAT(LUTI2_c_2s, aa64_sme2, do_lut, a, gen_helper_sme2_luti2_2s, false)
+
+TRANS_FEAT(LUTI2_c_4b, aa64_sme2, do_lut, a, gen_helper_sme2_luti2_4b, false)
+TRANS_FEAT(LUTI2_c_4h, aa64_sme2, do_lut, a, gen_helper_sme2_luti2_4h, false)
+TRANS_FEAT(LUTI2_c_4s, aa64_sme2, do_lut, a, gen_helper_sme2_luti2_4s, false)
+
+TRANS_FEAT(LUTI4_c_1b, aa64_sme2, do_lut, a, gen_helper_sme2_luti4_1b, false)
+TRANS_FEAT(LUTI4_c_1h, aa64_sme2, do_lut, a, gen_helper_sme2_luti4_1h, false)
+TRANS_FEAT(LUTI4_c_1s, aa64_sme2, do_lut, a, gen_helper_sme2_luti4_1s, false)
+
+TRANS_FEAT(LUTI4_c_2b, aa64_sme2, do_lut, a, gen_helper_sme2_luti4_2b, false)
+TRANS_FEAT(LUTI4_c_2h, aa64_sme2, do_lut, a, gen_helper_sme2_luti4_2h, false)
+TRANS_FEAT(LUTI4_c_2s, aa64_sme2, do_lut, a, gen_helper_sme2_luti4_2s, false)
+
+TRANS_FEAT(LUTI4_c_4h, aa64_sme2, do_lut, a, gen_helper_sme2_luti4_4h, false)
+TRANS_FEAT(LUTI4_c_4s, aa64_sme2, do_lut, a, gen_helper_sme2_luti4_4s, false)
+
+static bool do_lut_s4(DisasContext *s, arg_lut *a, gen_helper_gvec_2_ptr *fn)
+{
+    return !(a->zd & 0b01100) && do_lut(s, a, fn, true);
+}
+
+static bool do_lut_s8(DisasContext *s, arg_lut *a, gen_helper_gvec_2_ptr *fn)
+{
+    return !(a->zd & 0b01000) && do_lut(s, a, fn, true);
+}
+
+TRANS_FEAT(LUTI2_s_2b, aa64_sme2p1, do_lut_s8, a, gen_helper_sme2_luti2_2b)
+TRANS_FEAT(LUTI2_s_2h, aa64_sme2p1, do_lut_s8, a, gen_helper_sme2_luti2_2h)
+
+TRANS_FEAT(LUTI2_s_4b, aa64_sme2p1, do_lut_s4, a, gen_helper_sme2_luti2_4b)
+TRANS_FEAT(LUTI2_s_4h, aa64_sme2p1, do_lut_s4, a, gen_helper_sme2_luti2_4h)
+
+TRANS_FEAT(LUTI4_s_2b, aa64_sme2p1, do_lut_s8, a, gen_helper_sme2_luti4_2b)
+TRANS_FEAT(LUTI4_s_2h, aa64_sme2p1, do_lut_s8, a, gen_helper_sme2_luti4_2h)
+
+TRANS_FEAT(LUTI4_s_4h, aa64_sme2p1, do_lut_s4, a, gen_helper_sme2_luti4_4h)
diff --git a/target/arm/tcg/vec_helper.c b/target/arm/tcg/vec_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/vec_helper.c
+++ b/target/arm/tcg/vec_helper.c
@@ -XXX,XX +XXX,XX @@ void HELPER(gvec_ursqrte_s)(void *vd, void *vn, uint32_t desc)
     }
     clear_tail(d, opr_sz, simd_maxsz(desc));
 }
+
+static inline void do_lut_b(void *zd, uint64_t *indexes, uint64_t *table,
+                            unsigned elements, unsigned segbase,
+                            unsigned dstride, unsigned isize,
+                            unsigned tsize, unsigned nreg)
+{
+    for (unsigned r = 0; r < nreg; ++r) {
+        uint8_t *dst = zd + dstride * r;
+        unsigned base = segbase + r * elements;
+
+        for (unsigned e = 0; e < elements; ++e) {
+            unsigned index = extractn(indexes, (base + e) * isize, isize);
+            dst[H1(e)] = extractn(table, index * tsize, 8);
+        }
+    }
+}
+
+static inline void do_lut_h(void *zd, uint64_t *indexes, uint64_t *table,
+                            unsigned elements, unsigned segbase,
+                            unsigned dstride, unsigned isize,
+                            unsigned tsize, unsigned nreg)
+{
+    for (unsigned r = 0; r < nreg; ++r) {
+        uint16_t *dst = zd + dstride * r;
+        unsigned base = segbase + r * elements;
+
+        for (unsigned e = 0; e < elements; ++e) {
+            unsigned index = extractn(indexes, (base + e) * isize, isize);
+            dst[H2(e)] = extractn(table, index * tsize, 16);
+        }
+    }
+}
+
+static inline void do_lut_s(void *zd, uint64_t *indexes, uint32_t *table,
+                            unsigned elements, unsigned segbase,
+                            unsigned dstride, unsigned isize,
+                            unsigned tsize, unsigned nreg)
+{
+    for (unsigned r = 0; r < nreg; ++r) {
+        uint32_t *dst = zd + dstride * r;
+        unsigned base = segbase + r * elements;
+
+        for (unsigned e = 0; e < elements; ++e) {
+            unsigned index = extractn(indexes, (base + e) * isize, isize);
+            dst[H4(e)] = table[H4(index)];
+        }
+    }
+}
+
+#define DO_SME2_LUT(ISIZE, NREG, SUFF, ESIZE) \
+void helper_sme2_luti##ISIZE##_##NREG##SUFF                             \
+    (void *zd, void *zn, CPUARMState *env, uint32_t desc)               \
+{                                                                       \
+    unsigned vl = simd_oprsz(desc);                                     \
+    unsigned strided = extract32(desc, SIMD_DATA_SHIFT, 1);             \
+    unsigned idx = extract32(desc, SIMD_DATA_SHIFT + 1, 4);             \
+    unsigned elements = vl / ESIZE;                                     \
+    unsigned dstride = (!strided ? 1 : NREG == 4 ? 4 : 8);              \
+    unsigned segments = (ESIZE * 8) / (ISIZE * NREG);                   \
+    unsigned segment = idx & (segments - 1);                            \
+    ARMVectorReg indexes;                                               \
+    memcpy(&indexes, zn, vl);                                           \
+    do_lut_##SUFF(zd, indexes.d, (void *)env->za_state.zt0, elements,   \
+                  segment * NREG * elements,                            \
+                  dstride * sizeof(ARMVectorReg), ISIZE, 32, NREG);     \
+}
+
+DO_SME2_LUT(2,1,b, 1)
+DO_SME2_LUT(2,1,h, 2)
+DO_SME2_LUT(2,1,s, 4)
+DO_SME2_LUT(2,2,b, 1)
+DO_SME2_LUT(2,2,h, 2)
+DO_SME2_LUT(2,2,s, 4)
+DO_SME2_LUT(2,4,b, 1)
+DO_SME2_LUT(2,4,h, 2)
+DO_SME2_LUT(2,4,s, 4)
+
+DO_SME2_LUT(4,1,b, 1)
+DO_SME2_LUT(4,1,h, 2)
+DO_SME2_LUT(4,1,s, 4)
+DO_SME2_LUT(4,2,b, 1)
+DO_SME2_LUT(4,2,h, 2)
+DO_SME2_LUT(4,2,s, 4)
+DO_SME2_LUT(4,4,b, 1)
+DO_SME2_LUT(4,4,h, 2)
+DO_SME2_LUT(4,4,s, 4)
+
+#undef DO_SME2_LUT
-- 
2.43.0

The pattern we currently have as FMOPA_h is the "widening" insn
that takes fp16 inputs and produces single-precision outputs.
This is unlike FMOPA_s and FMOPA_d, which are non-widening
produce outputs the same size as their inputs.

SME2 introduces a non-widening fp16 FMOPA operation; rename
FMOPA_h to FMOPA_w_h (for 'widening'), so we can use FMOPA_h
for the non-widening version, giving it a name in line with
the other non-widening ops FMOPA_s and FMOPA_d.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-102-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/helper-sme.h    | 2 +-
 target/arm/tcg/sme.decode      | 2 +-
 target/arm/tcg/sme_helper.c    | 4 ++--
 target/arm/tcg/translate-sme.c | 4 ++--
 4 files changed, 6 insertions(+), 6 deletions(-)

Our current BFMOPA opcode pattern is the widening version
of the insn. Rename it to BFMOPA_w, to make way for
the non-widening version added in SME2.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-103-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/helper-sme.h    | 2 +-
 target/arm/tcg/sme.decode      | 2 +-
 target/arm/tcg/sme_helper.c    | 4 ++--
 target/arm/tcg/translate-sme.c | 2 +-
 4 files changed, 5 insertions(+), 5 deletions(-)

From: Richard Henderson <richard.henderson@linaro.org>

For non-widening, we can use float_muladd_negate_product,
For widening, which uses dot-product, we need to handle
the negation explicitly.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-104-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/helper-sme.h    |  19 +++++
 target/arm/tcg/vec_internal.h  |   5 ++
 target/arm/tcg/sme_helper.c    | 141 +++++++++++++++++++++++++++------
 target/arm/tcg/translate-sme.c |  27 ++++---
 4 files changed, 160 insertions(+), 32 deletions(-)

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-105-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/helper-sme.h    |  6 ++++
 target/arm/tcg/sme.decode      |  2 ++
 target/arm/tcg/sme_helper.c    | 51 ++++++++++++++++++++++++++++++++++
 target/arm/tcg/translate-sme.c |  4 +++
 4 files changed, 63 insertions(+)

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-106-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/helper-sme.h    |  6 ++++
 target/arm/tcg/sme.decode      |  2 ++
 target/arm/tcg/sme_helper.c    | 51 ++++++++++++++++++++++++++++++++++
 target/arm/tcg/translate-sme.c |  5 ++++
 4 files changed, 64 insertions(+)

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-107-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 docs/system/arm/emulation.rst |  6 ++++++
 target/arm/tcg/cpu64.c        | 10 ++++++++--
 2 files changed, 14 insertions(+), 2 deletions(-)

diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst
index XXXXXXX..XXXXXXX 100644
--- a/docs/system/arm/emulation.rst
+++ b/docs/system/arm/emulation.rst
@@ -XXX,XX +XXX,XX @@ the following architecture extensions:
 - FEAT_SM3 (Advanced SIMD SM3 instructions)
 - FEAT_SM4 (Advanced SIMD SM4 instructions)
 - FEAT_SME (Scalable Matrix Extension)
+- FEAT_SME2 (Scalable Matrix Extension version 2)
+- FEAT_SME2p1 (Scalable Matrix Extension version 2.1)
+- FEAT_SME_B16B16 (Non-widening BFloat16 arithmetic for SME2)
 - FEAT_SME_FA64 (Full A64 instruction set in Streaming SVE mode)
+- FEAT_SME_F16F16 (Non-widening half-precision FP16 arithmetic for SME2)
 - FEAT_SME_F64F64 (Double-precision floating-point outer product instructions)
 - FEAT_SME_I16I64 (16-bit to 64-bit integer widening outer product instructions)
 - FEAT_SVE (Scalable Vector Extension)
 - FEAT_SVE_AES (Scalable Vector AES instructions)
+- FEAT_SVE_B16B16 (Non-widening BFloat16 arithmetic for SVE2)
 - FEAT_SVE_BitPerm (Scalable Vector Bit Permutes instructions)
 - FEAT_SVE_PMULL128 (Scalable Vector PMULL instructions)
 - FEAT_SVE_SHA3 (Scalable Vector SHA3 instructions)
 - FEAT_SVE_SM4 (Scalable Vector SM4 instructions)
 - FEAT_SVE2 (Scalable Vector Extension version 2)
+- FEAT_SVE2p1 (Scalable Vector Extension version 2.1)
 - FEAT_SPECRES (Speculation restriction instructions)
 - FEAT_SSBS (Speculative Store Bypass Safe)
 - FEAT_SSBS2 (MRS and MSR instructions for SSBS version 2)
diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/cpu64.c
+++ b/target/arm/tcg/cpu64.c
@@ -XXX,XX +XXX,XX @@ void aarch64_max_tcg_initfn(Object *obj)
      */
     t = FIELD_DP64(t, ID_AA64PFR1, MTE, 3);       /* FEAT_MTE3 */
     t = FIELD_DP64(t, ID_AA64PFR1, RAS_FRAC, 0);  /* FEAT_RASv1p1 + FEAT_DoubleFault */
-    t = FIELD_DP64(t, ID_AA64PFR1, SME, 1);       /* FEAT_SME */
+    t = FIELD_DP64(t, ID_AA64PFR1, SME, 2);       /* FEAT_SME2 */
     t = FIELD_DP64(t, ID_AA64PFR1, CSV2_FRAC, 0); /* FEAT_CSV2_3 */
     t = FIELD_DP64(t, ID_AA64PFR1, NMI, 1);       /* FEAT_NMI */
     SET_IDREG(isar, ID_AA64PFR1, t);
@@ -XXX,XX +XXX,XX @@ void aarch64_max_tcg_initfn(Object *obj)
     FIELD_DP64_IDREG(isar, ID_AA64MMFR3, SPEC_FPACC, 1); /* FEAT_FPACC_SPEC */
 
     t = GET_IDREG(isar, ID_AA64ZFR0);
-    t = FIELD_DP64(t, ID_AA64ZFR0, SVEVER, 1);
+    t = FIELD_DP64(t, ID_AA64ZFR0, SVEVER, 2);    /* FEAT_SVE2p1 */
     t = FIELD_DP64(t, ID_AA64ZFR0, AES, 2);       /* FEAT_SVE_PMULL128 */
     t = FIELD_DP64(t, ID_AA64ZFR0, BITPERM, 1);   /* FEAT_SVE_BitPerm */
     t = FIELD_DP64(t, ID_AA64ZFR0, BFLOAT16, 2);  /* FEAT_BF16, FEAT_EBF16 */
+    t = FIELD_DP64(t, ID_AA64ZFR0, B16B16, 1);    /* FEAT_SVE_B16B16 */
     t = FIELD_DP64(t, ID_AA64ZFR0, SHA3, 1);      /* FEAT_SVE_SHA3 */
     t = FIELD_DP64(t, ID_AA64ZFR0, SM4, 1);       /* FEAT_SVE_SM4 */
     t = FIELD_DP64(t, ID_AA64ZFR0, I8MM, 1);      /* FEAT_I8MM */
@@ -XXX,XX +XXX,XX @@ void aarch64_max_tcg_initfn(Object *obj)
 
     t = GET_IDREG(isar, ID_AA64SMFR0);
     t = FIELD_DP64(t, ID_AA64SMFR0, F32F32, 1);   /* FEAT_SME */
+    t = FIELD_DP64(t, ID_AA64SMFR0, BI32I32, 1);  /* FEAT_SME2 */
     t = FIELD_DP64(t, ID_AA64SMFR0, B16F32, 1);   /* FEAT_SME */
     t = FIELD_DP64(t, ID_AA64SMFR0, F16F32, 1);   /* FEAT_SME */
     t = FIELD_DP64(t, ID_AA64SMFR0, I8I32, 0xf);  /* FEAT_SME */
+    t = FIELD_DP64(t, ID_AA64SMFR0, F16F16, 1);   /* FEAT_SME_F16F16 */
+    t = FIELD_DP64(t, ID_AA64SMFR0, B16B16, 1);   /* FEAT_SME_B16B16 */
+    t = FIELD_DP64(t, ID_AA64SMFR0, I16I32, 5);   /* FEAT_SME2 */
     t = FIELD_DP64(t, ID_AA64SMFR0, F64F64, 1);   /* FEAT_SME_F64F64 */
     t = FIELD_DP64(t, ID_AA64SMFR0, I16I64, 0xf); /* FEAT_SME_I16I64 */
+    t = FIELD_DP64(t, ID_AA64SMFR0, SMEVER, 2);   /* FEAT_SME2p1 */
     t = FIELD_DP64(t, ID_AA64SMFR0, FA64, 1);     /* FEAT_SME_FA64 */
     SET_IDREG(isar, ID_AA64SMFR0, t);
 
-- 
2.43.0

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-108-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 linux-user/elfload.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/linux-user/elfload.c b/linux-user/elfload.c
index XXXXXXX..XXXXXXX 100644
--- a/linux-user/elfload.c
+++ b/linux-user/elfload.c
@@ -XXX,XX +XXX,XX @@ uint64_t get_elf_hwcap2(void)
     GET_FEATURE_ID(aa64_sme_fa64, ARM_HWCAP2_A64_SME_FA64);
     GET_FEATURE_ID(aa64_hbc, ARM_HWCAP2_A64_HBC);
     GET_FEATURE_ID(aa64_mops, ARM_HWCAP2_A64_MOPS);
+    GET_FEATURE_ID(aa64_sve2p1, ARM_HWCAP2_A64_SVE2P1);
+    GET_FEATURE_ID(aa64_sme2, (ARM_HWCAP2_A64_SME2 |
+                               ARM_HWCAP2_A64_SME_I16I32 |
+                               ARM_HWCAP2_A64_SME_BI32I32));
+    GET_FEATURE_ID(aa64_sme2p1, ARM_HWCAP2_A64_SME2P1);
+    GET_FEATURE_ID(aa64_sme_b16b16, ARM_HWCAP2_A64_SME_B16B16);
+    GET_FEATURE_ID(aa64_sme_f16f16, ARM_HWCAP2_A64_SME_F16F16);
+    GET_FEATURE_ID(aa64_sve_b16b16, ARM_HWCAP2_A64_SVE_B16B16);
 
     return hwcaps;
 }
-- 
2.43.0