As promised, more Arm patches. The big thing in here is the MPS2-AN521 board model. thanks -- PMM The following changes since commit cfe6c547690b06fbce54a6d0f7b05dd7f18e36ea: Merge remote-tracking branch 'remotes/xanclic/tags/pull-block-2019-01-31' into staging (2019-01-31 19:26:09 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20190201 for you to fetch changes up to 7743b70ffe7a8ce168adce2cf50ad156b1fefb8c: tests/microbit-test: Add tests for nRF51 NVMC (2019-02-01 15:32:17 +0000) ---------------------------------------------------------------- target-arm queue: * New machine mps2-an521 -- this is a model of the AN521 FPGA image for the MPS2 devboard * Fix various places where we failed to UNDEF invalid A64 instructions * Don't UNDEF a valid FCMLA on 32-bit inputs * Fix some bugs in the newly-added PAuth implementation * microbit: Implement NVMC non-volatile memory controller ---------------------------------------------------------------- Aaron Lindsay OS (2): target/arm: Send interrupts on PMU counter overflow target/arm: Add a timer to predict PMU counter overflow Julia Suvorova (1): arm: Clarify the logic of set_pc() Peter Maydell (33): armv7m: Don't assume the NVIC's CPU is CPU 0 armv7m: Make cpu object a child of the armv7m container armv7m: Pass through start-powered-off CPU property hw/arm/iotkit: Rename IoTKit to ARMSSE hw/arm/iotkit: Refactor into abstract base class and subclass hw/arm/iotkit: Rename 'iotkit' local variables and functions hw/arm/iotkit: Rename files to hw/arm/armsse.[ch] hw/misc/iotkit-secctl: Support 4 internal MPCs hw/arm/armsse: Make number of SRAM banks parameterised hw/arm/armsse: Make SRAM bank size configurable hw/arm/armsse: Support dual-CPU configuration hw/arm/armsse: Give each CPU its own view of memory hw/arm/armsse: Put each CPU in its own cluster object iotkit-sysinfo: Make SYS_VERSION and SYS_CONFIG configurable hw/arm/armsse: Add unimplemented-device stubs for MHUs hw/arm/armsse: Add unimplemented-device stubs for PPUs hw/arm/armsse: Add unimplemented-device stub for cache control registers hw/arm/armsse: Add unimplemented-device stub for CPU local control registers hw/misc/armsse-cpuid: Implement SSE-200 CPU_IDENTITY register block hw/arm/armsse: Add CPU_IDENTITY block to SSE-200 hw/arm/armsse: Add SSE-200 model hw/arm/mps2-tz: Add IRQ infrastructure to support SSE-200 hw/arm/mps2-tz: Add mps2-an521 model target/arm/translate-a64: Don't underdecode system instructions target/arm/translate-a64: Don't underdecode PRFM target/arm/translate-a64: Don't underdecode SIMD ld/st multiple target/arm/translate-a64: Don't underdecode SIMD ld/st single target/arm/translate-a64: Don't underdecode add/sub extended register target/arm/translate-a64: Don't underdecode FP insns target/arm/translate-a64: Don't underdecode SDOT and UDOT exec.c: Don't reallocate IOMMUNotifiers that are in use target/arm/translate-a64: Fix FCMLA decoding error target/arm/translate-a64: Fix mishandling of size in FCMLA decode Remi Denis-Courmont (2): target/arm: fix AArch64 virtual address space size target/arm: fix decoding of B{,L}RA{A,B} Richard Henderson (5): target/arm: Enable API, APK bits in SCR, HCR target/arm: Always enable pac keys for user-only aarch64-linux-user: Update HWCAP bits from linux 5.0-rc1 aarch64-linux-user: Enable HWCAP bits for PAuth linux-user: Initialize aarch64 pac keys Steffen Görtz (3): hw/nvram/nrf51_nvm: Add nRF51 non-volatile memories arm: Instantiate NRF51 special NVM's and NVMC tests/microbit-test: Add tests for nRF51 NVMC kumar sourav (1): hw/arm/nrf51_soc: set object owner in memory_region_init_ram hw/arm/Makefile.objs | 2 +- hw/misc/Makefile.objs | 1 + hw/nvram/Makefile.objs | 1 + include/hw/arm/{iotkit.h => armsse.h} | 113 ++- include/hw/arm/armv7m.h | 1 + include/hw/arm/nrf51_soc.h | 2 + include/hw/misc/armsse-cpuid.h | 41 ++ include/hw/misc/iotkit-secctl.h | 6 +- include/hw/misc/iotkit-sysinfo.h | 6 + include/hw/nvram/nrf51_nvm.h | 64 ++ include/qom/cpu.h | 16 +- linux-user/aarch64/target_syscall.h | 2 + target/arm/cpu.h | 12 +- exec.c | 10 +- hw/arm/armsse.c | 1241 +++++++++++++++++++++++++++++++++ hw/arm/armv7m.c | 23 +- hw/arm/boot.c | 4 - hw/arm/iotkit.c | 759 -------------------- hw/arm/mps2-tz.c | 121 +++- hw/arm/nrf51_soc.c | 44 +- hw/intc/armv7m_nvic.c | 3 +- hw/misc/armsse-cpuid.c | 134 ++++ hw/misc/iotkit-secctl.c | 5 +- hw/misc/iotkit-sysinfo.c | 15 +- hw/nvram/nrf51_nvm.c | 388 +++++++++++ linux-user/aarch64/cpu_loop.c | 31 +- linux-user/elfload.c | 10 + target/arm/arm-powerctl.c | 3 - target/arm/cpu.c | 41 +- target/arm/cpu64.c | 75 -- target/arm/helper.c | 139 +++- target/arm/translate-a64.c | 59 +- tests/microbit-test.c | 108 +++ MAINTAINERS | 6 +- default-configs/arm-softmmu.mak | 3 +- hw/misc/trace-events | 4 + 36 files changed, 2552 insertions(+), 941 deletions(-) rename include/hw/arm/{iotkit.h => armsse.h} (53%) create mode 100644 include/hw/misc/armsse-cpuid.h create mode 100644 include/hw/nvram/nrf51_nvm.h create mode 100644 hw/arm/armsse.c delete mode 100644 hw/arm/iotkit.c create mode 100644 hw/misc/armsse-cpuid.c create mode 100644 hw/nvram/nrf51_nvm.c From: kumar sourav <sourav.jb1988@gmail.com> set object owner in memory_region_init_ram() instead of NULL. Signed-off-by: kumar sourav <sourav.jb1988@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20190125155630.17430-1-sourav.jb1988@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/nrf51_soc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/arm/nrf51_soc.c b/hw/arm/nrf51_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nrf51_soc.c +++ b/hw/arm/nrf51_soc.c @@ -XXX,XX +XXX,XX @@ static void nrf51_soc_realize(DeviceState *dev_soc, Error **errp) } memory_region_add_subregion(&s->container, NRF51_FLASH_BASE, &s->flash); - memory_region_init_ram(&s->sram, NULL, "nrf51.sram", s->sram_size, &err); + memory_region_init_ram(&s->sram, OBJECT(s), "nrf51.sram", s->sram_size, + &err); if (err) { error_propagate(errp, err); return; -- 2.20.1 Currently the ARMv7M NVIC object's realize method assumes that the CPU the NVIC is attached to is CPU 0, because it thinks there can only ever be one CPU in the system. To allow a dual-Cortex-M33 setup we need to remove this assumption; instead the armv7m wrapper object tells the NVIC its CPU, in the same way that it already tells the CPU what the NVIC is. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-2-peter.maydell@linaro.org --- hw/arm/armv7m.c | 6 ++++-- hw/intc/armv7m_nvic.c | 3 +-- 2 files changed, 5 insertions(+), 4 deletions(-) diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ static void armv7m_realize(DeviceState *dev, Error **errp) } } - /* Tell the CPU where the NVIC is; it will fail realize if it doesn't - * have one. + /* + * Tell the CPU where the NVIC is; it will fail realize if it doesn't + * have one. Similarly, tell the NVIC where its CPU is. */ s->cpu->env.nvic = &s->nvic; + s->nvic.cpu = s->cpu; object_property_set_bool(OBJECT(s->cpu), true, "realized", &err); if (err != NULL) { diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static void armv7m_nvic_realize(DeviceState *dev, Error **errp) Error *err = NULL; int regionlen; - s->cpu = ARM_CPU(qemu_get_cpu(0)); - + /* The armv7m container object will have set our CPU pointer */ if (!s->cpu || !arm_feature(&s->cpu->env, ARM_FEATURE_M)) { error_setg(errp, "The NVIC can only be used with a Cortex-M CPU"); return; -- 2.20.1 Rather than just creating the CPUs with object_new, make them child objects of the armv7m container. This will allow the cluster code to find the CPUs if an armv7m object is made a child of a cluster object. object_new_with_props() will do the parenting for us. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-3-peter.maydell@linaro.org --- hw/arm/armv7m.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ static void armv7m_realize(DeviceState *dev, Error **errp) memory_region_add_subregion_overlap(&s->container, 0, s->board_memory, -1); - s->cpu = ARM_CPU(object_new(s->cpu_type)); + s->cpu = ARM_CPU(object_new_with_props(s->cpu_type, OBJECT(s), "cpu", + &err, NULL)); + if (err != NULL) { + error_propagate(errp, err); + return; + } object_property_set_link(OBJECT(s->cpu), OBJECT(&s->container), "memory", &error_abort); -- 2.20.1 Expose "start-powered-off" as a property of the ARMv7M container, which we just pass through to the CPU object in the same way that we do for "init-svtor" and "idau". (We want this for the SSE-200, which powers up only the first CPU at reset and leaves the second powered down.) As with the other CPU properties here, we can't just use alias properties, because the CPU QOM object is not created until armv7m realize time. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-4-peter.maydell@linaro.org --- include/hw/arm/armv7m.h | 1 + hw/arm/armv7m.c | 10 ++++++++++ 2 files changed, 11 insertions(+) diff --git a/include/hw/arm/armv7m.h b/include/hw/arm/armv7m.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armv7m.h +++ b/include/hw/arm/armv7m.h @@ -XXX,XX +XXX,XX @@ typedef struct ARMv7MState { Object *idau; uint32_t init_svtor; bool enable_bitband; + bool start_powered_off; } ARMv7MState; #endif diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ static void armv7m_realize(DeviceState *dev, Error **errp) return; } } + if (object_property_find(OBJECT(s->cpu), "start-powered-off", NULL)) { + object_property_set_bool(OBJECT(s->cpu), s->start_powered_off, + "start-powered-off", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } + } /* * Tell the CPU where the NVIC is; it will fail realize if it doesn't @@ -XXX,XX +XXX,XX @@ static Property armv7m_properties[] = { DEFINE_PROP_LINK("idau", ARMv7MState, idau, TYPE_IDAU_INTERFACE, Object *), DEFINE_PROP_UINT32("init-svtor", ARMv7MState, init_svtor, 0), DEFINE_PROP_BOOL("enable-bitband", ARMv7MState, enable_bitband, false), + DEFINE_PROP_BOOL("start-powered-off", ARMv7MState, start_powered_off, + false), DEFINE_PROP_END_OF_LIST(), }; -- 2.20.1 The Arm IoTKit was effectively the forerunner of a series of subsystems for embedded SoCs, named the SSE-050, SSE-100 and SSE-200: https://developer.arm.com/products/system-design/subsystems These are generally quite similar, though later iterations have extra devices that earlier ones do not. We want to add a model of the SSE-200, which means refactoring the IoTKit code into an abstract base class and subclasses (using the same design that the bcm283x SoC and Aspeed SoC family implementations do). As a first step, rename the IoTKit struct and QOM macros to ARMSSE, which is what we're going to name the base class. We temporarily retain TYPE_IOTKIT to avoid changing the code that instantiates a TYPE_IOTKIT device here and then changing it back again when it is re-introduced as a subclass. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-5-peter.maydell@linaro.org --- include/hw/arm/iotkit.h | 22 ++++++++++----- hw/arm/iotkit.c | 59 +++++++++++++++++++++-------------------- hw/arm/mps2-tz.c | 2 +- 3 files changed, 47 insertions(+), 36 deletions(-) diff --git a/include/hw/arm/iotkit.h b/include/hw/arm/iotkit.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/iotkit.h +++ b/include/hw/arm/iotkit.h @@ -XXX,XX +XXX,XX @@ /* - * ARM IoT Kit + * ARM SSE (Subsystems for Embedded): IoTKit * * Copyright (c) 2018 Linaro Limited * Written by Peter Maydell @@ -XXX,XX +XXX,XX @@ * (at your option) any later version. */ -/* This is a model of the Arm IoT Kit which is documented in +/* + * This is a model of the Arm "Subsystems for Embedded" family of + * hardware, which include the IoT Kit and the SSE-050, SSE-100 and + * SSE-200. Currently we model only the Arm IoT Kit which is documented in * http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ecm0601256/index.html * It contains: * a Cortex-M33 @@ -XXX,XX +XXX,XX @@ #include "hw/or-irq.h" #include "hw/core/split-irq.h" -#define TYPE_IOTKIT "iotkit" -#define IOTKIT(obj) OBJECT_CHECK(IoTKit, (obj), TYPE_IOTKIT) +#define TYPE_ARMSSE "iotkit" +#define ARMSSE(obj) OBJECT_CHECK(ARMSSE, (obj), TYPE_ARMSSE) + +/* + * For the moment TYPE_IOTKIT is a synonym for TYPE_ARMSSE (and the + * latter's underlying name is left as "iotkit"); in a later + * commit it will become a subclass of TYPE_ARMSSE. + */ +#define TYPE_IOTKIT TYPE_ARMSSE /* We have an IRQ splitter and an OR gate input for each external PPC * and the 2 internal PPCs @@ -XXX,XX +XXX,XX @@ #define NUM_EXTERNAL_PPCS (IOTS_NUM_AHB_EXP_PPC + IOTS_NUM_APB_EXP_PPC) #define NUM_PPCS (NUM_EXTERNAL_PPCS + 2) -typedef struct IoTKit { +typedef struct ARMSSE { /*< private >*/ SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ typedef struct IoTKit { MemoryRegion *board_memory; uint32_t exp_numirq; uint32_t mainclk_frq; -} IoTKit; +} ARMSSE; #endif diff --git a/hw/arm/iotkit.c b/hw/arm/iotkit.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/iotkit.c +++ b/hw/arm/iotkit.c @@ -XXX,XX +XXX,XX @@ /* - * Arm IoT Kit + * Arm SSE (Subsystems for Embedded): IoTKit * * Copyright (c) 2018 Linaro Limited * Written by Peter Maydell @@ -XXX,XX +XXX,XX @@ /* Create an alias region of @size bytes starting at @base * which mirrors the memory starting at @orig. */ -static void make_alias(IoTKit *s, MemoryRegion *mr, const char *name, +static void make_alias(ARMSSE *s, MemoryRegion *mr, const char *name, hwaddr base, hwaddr size, hwaddr orig) { memory_region_init_alias(mr, NULL, name, &s->container, orig, size); @@ -XXX,XX +XXX,XX @@ static void irq_status_forwarder(void *opaque, int n, int level) static void nsccfg_handler(void *opaque, int n, int level) { - IoTKit *s = IOTKIT(opaque); + ARMSSE *s = ARMSSE(opaque); s->nsccfg = level; } -static void iotkit_forward_ppc(IoTKit *s, const char *ppcname, int ppcnum) +static void iotkit_forward_ppc(ARMSSE *s, const char *ppcname, int ppcnum) { /* Each of the 4 AHB and 4 APB PPCs that might be present in a - * system using the IoTKit has a collection of control lines which + * system using the ARMSSE has a collection of control lines which * are provided by the security controller and which we want to - * expose as control lines on the IoTKit device itself, so the - * code using the IoTKit can wire them up to the PPCs. + * expose as control lines on the ARMSSE device itself, so the + * code using the ARMSSE can wire them up to the PPCs. */ SplitIRQ *splitter = &s->ppc_irq_splitter[ppcnum]; DeviceState *iotkitdev = DEVICE(s); @@ -XXX,XX +XXX,XX @@ static void iotkit_forward_ppc(IoTKit *s, const char *ppcname, int ppcnum) g_free(name); } -static void iotkit_forward_sec_resp_cfg(IoTKit *s) +static void iotkit_forward_sec_resp_cfg(ARMSSE *s) { /* Forward the 3rd output from the splitter device as a * named GPIO output of the iotkit object. @@ -XXX,XX +XXX,XX @@ static void iotkit_forward_sec_resp_cfg(IoTKit *s) static void iotkit_init(Object *obj) { - IoTKit *s = IOTKIT(obj); + ARMSSE *s = ARMSSE(obj); int i; memory_region_init(&s->container, obj, "iotkit-container", UINT64_MAX); @@ -XXX,XX +XXX,XX @@ static void iotkit_init(Object *obj) static void iotkit_exp_irq(void *opaque, int n, int level) { - IoTKit *s = IOTKIT(opaque); + ARMSSE *s = ARMSSE(opaque); qemu_set_irq(s->exp_irqs[n], level); } static void iotkit_mpcexp_status(void *opaque, int n, int level) { - IoTKit *s = IOTKIT(opaque); + ARMSSE *s = ARMSSE(opaque); qemu_set_irq(s->mpcexp_status_in[n], level); } static void iotkit_realize(DeviceState *dev, Error **errp) { - IoTKit *s = IOTKIT(dev); + ARMSSE *s = ARMSSE(dev); int i; MemoryRegion *mr; Error *err = NULL; @@ -XXX,XX +XXX,XX @@ static void iotkit_realize(DeviceState *dev, Error **errp) * devices exist in both address spaces but with hard-wired security * permissions that will cause the CPU to fault for non-secure accesses. * - * The IoTKit has an IDAU (Implementation Defined Access Unit), + * The ARMSSE has an IDAU (Implementation Defined Access Unit), * which specifies hard-wired security permissions for different - * areas of the physical address space. For the IoTKit IDAU, the + * areas of the physical address space. For the ARMSSE IDAU, the * top 4 bits of the physical address are the IDAU region ID, and * if bit 28 (ie the lowest bit of the ID) is 0 then this is an NS * region, otherwise it is an S region. @@ -XXX,XX +XXX,XX @@ static void iotkit_realize(DeviceState *dev, Error **errp) * 0x20000000..0x2007ffff 32KB FPGA block RAM * 0x30000000..0x3fffffff alias of 0x20000000..0x2fffffff * 0x40000000..0x4000ffff base peripheral region 1 - * 0x40010000..0x4001ffff CPU peripherals (none for IoTKit) + * 0x40010000..0x4001ffff CPU peripherals (none for ARMSSE) * 0x40020000..0x4002ffff system control element peripherals * 0x40080000..0x400fffff base peripheral region 2 * 0x50000000..0x5fffffff alias of 0x40000000..0x4fffffff @@ -XXX,XX +XXX,XX @@ static void iotkit_realize(DeviceState *dev, Error **errp) qdev_connect_gpio_out_named(dev_secctl, "nsc_cfg", 0, s->nsc_cfg_in); /* The sec_resp_cfg output from the security controller must be split into - * multiple lines, one for each of the PPCs within the IoTKit and one - * that will be an output from the IoTKit to the system. + * multiple lines, one for each of the PPCs within the ARMSSE and one + * that will be an output from the ARMSSE to the system. */ object_property_set_int(OBJECT(&s->sec_resp_splitter), 3, "num-lines", &err); @@ -XXX,XX +XXX,XX @@ static void iotkit_realize(DeviceState *dev, Error **errp) /* 0x40010000 .. 0x4001ffff: private CPU region: unused in IoTKit */ - /* 0x40020000 .. 0x4002ffff : IoTKit system control peripheral region */ + /* 0x40020000 .. 0x4002ffff : ARMSSE system control peripheral region */ /* Devices behind APB PPC1: * 0x4002f000: S32K timer */ @@ -XXX,XX +XXX,XX @@ static void iotkit_realize(DeviceState *dev, Error **errp) qdev_get_gpio_in(DEVICE(&s->nmi_orgate), 0)); sysbus_mmio_map(SYS_BUS_DEVICE(&s->s32kwatchdog), 0, 0x5002e000); - /* 0x40080000 .. 0x4008ffff : IoTKit second Base peripheral region */ + /* 0x40080000 .. 0x4008ffff : ARMSSE second Base peripheral region */ qdev_prop_set_uint32(DEVICE(&s->nswatchdog), "wdogclk-frq", s->mainclk_frq); object_property_set_bool(OBJECT(&s->nswatchdog), true, "realized", &err); @@ -XXX,XX +XXX,XX @@ static void iotkit_realize(DeviceState *dev, Error **errp) * Expose our container region to the board model; this corresponds * to the AHB Slave Expansion ports which allow bus master devices * (eg DMA controllers) in the board model to make transactions into - * devices in the IoTKit. + * devices in the ARMSSE. */ sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->container); @@ -XXX,XX +XXX,XX @@ static void iotkit_realize(DeviceState *dev, Error **errp) static void iotkit_idau_check(IDAUInterface *ii, uint32_t address, int *iregion, bool *exempt, bool *ns, bool *nsc) { - /* For IoTKit systems the IDAU responses are simple logical functions + /* + * For ARMSSE systems the IDAU responses are simple logical functions * of the address bits. The NSC attribute is guest-adjustable via the * NSCCFG register in the security controller. */ - IoTKit *s = IOTKIT(ii); + ARMSSE *s = ARMSSE(ii); int region = extract32(address, 28, 4); *ns = !(region & 1); @@ -XXX,XX +XXX,XX @@ static const VMStateDescription iotkit_vmstate = { .version_id = 1, .minimum_version_id = 1, .fields = (VMStateField[]) { - VMSTATE_UINT32(nsccfg, IoTKit), + VMSTATE_UINT32(nsccfg, ARMSSE), VMSTATE_END_OF_LIST() } }; static Property iotkit_properties[] = { - DEFINE_PROP_LINK("memory", IoTKit, board_memory, TYPE_MEMORY_REGION, + DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), - DEFINE_PROP_UINT32("EXP_NUMIRQ", IoTKit, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK", IoTKit, mainclk_frq, 0), + DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), + DEFINE_PROP_UINT32("MAINCLK", ARMSSE, mainclk_frq, 0), DEFINE_PROP_END_OF_LIST() }; static void iotkit_reset(DeviceState *dev) { - IoTKit *s = IOTKIT(dev); + ARMSSE *s = ARMSSE(dev); s->nsccfg = 0; } @@ -XXX,XX +XXX,XX @@ static void iotkit_class_init(ObjectClass *klass, void *data) } static const TypeInfo iotkit_info = { - .name = TYPE_IOTKIT, + .name = TYPE_ARMSSE, .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(IoTKit), + .instance_size = sizeof(ARMSSE), .instance_init = iotkit_init, .class_init = iotkit_class_init, .interfaces = (InterfaceInfo[]) { diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ typedef struct { typedef struct { MachineState parent; - IoTKit iotkit; + ARMSSE iotkit; MemoryRegion psram; MemoryRegion ssram[3]; MemoryRegion ssram1_m; -- 2.20.1 The Arm SSE-200 Subsystem for Embedded is a revised and extended version of the older IoTKit SoC. Prepare for adding a model of it by refactoring the IoTKit code into an abstract base class which contains the functionality, driven by a class data block specific to each subclass. (This is the same approach used by the existing bcm283x SoC family implementation.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-6-peter.maydell@linaro.org --- include/hw/arm/iotkit.h | 22 +++++++++++++++++----- hw/arm/iotkit.c | 34 +++++++++++++++++++++++++++++----- 2 files changed, 46 insertions(+), 10 deletions(-) diff --git a/include/hw/arm/iotkit.h b/include/hw/arm/iotkit.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/iotkit.h +++ b/include/hw/arm/iotkit.h @@ -XXX,XX +XXX,XX @@ #include "hw/or-irq.h" #include "hw/core/split-irq.h" -#define TYPE_ARMSSE "iotkit" +#define TYPE_ARMSSE "arm-sse" #define ARMSSE(obj) OBJECT_CHECK(ARMSSE, (obj), TYPE_ARMSSE) /* - * For the moment TYPE_IOTKIT is a synonym for TYPE_ARMSSE (and the - * latter's underlying name is left as "iotkit"); in a later - * commit it will become a subclass of TYPE_ARMSSE. + * These type names are for specific IoTKit subsystems; other than + * instantiating them, code using these devices should always handle + * them via the ARMSSE base class, so they have no IOTKIT() etc macros. */ -#define TYPE_IOTKIT TYPE_ARMSSE +#define TYPE_IOTKIT "iotkit" /* We have an IRQ splitter and an OR gate input for each external PPC * and the 2 internal PPCs @@ -XXX,XX +XXX,XX @@ typedef struct ARMSSE { uint32_t mainclk_frq; } ARMSSE; +typedef struct ARMSSEInfo ARMSSEInfo; + +typedef struct ARMSSEClass { + DeviceClass parent_class; + const ARMSSEInfo *info; +} ARMSSEClass; + +#define ARMSSE_CLASS(klass) \ + OBJECT_CLASS_CHECK(ARMSSEClass, (klass), TYPE_ARMSSE) +#define ARMSSE_GET_CLASS(obj) \ + OBJECT_GET_CLASS(ARMSSEClass, (obj), TYPE_ARMSSE) + #endif diff --git a/hw/arm/iotkit.c b/hw/arm/iotkit.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/iotkit.c +++ b/hw/arm/iotkit.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/iotkit.h" #include "hw/arm/arm.h" +struct ARMSSEInfo { + const char *name; +}; + +static const ARMSSEInfo armsse_variants[] = { + { + .name = TYPE_IOTKIT, + }, +}; + /* Clock frequency in HZ of the 32KHz "slow clock" */ #define S32KCLK (32 * 1000) @@ -XXX,XX +XXX,XX @@ static void iotkit_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); IDAUInterfaceClass *iic = IDAU_INTERFACE_CLASS(klass); + ARMSSEClass *asc = ARMSSE_CLASS(klass); dc->realize = iotkit_realize; dc->vmsd = &iotkit_vmstate; dc->props = iotkit_properties; dc->reset = iotkit_reset; iic->check = iotkit_idau_check; + asc->info = data; } -static const TypeInfo iotkit_info = { +static const TypeInfo armsse_info = { .name = TYPE_ARMSSE, .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(ARMSSE), .instance_init = iotkit_init, - .class_init = iotkit_class_init, + .abstract = true, .interfaces = (InterfaceInfo[]) { { TYPE_IDAU_INTERFACE }, { } } }; -static void iotkit_register_types(void) +static void armsse_register_types(void) { - type_register_static(&iotkit_info); + int i; + + type_register_static(&armsse_info); + + for (i = 0; i < ARRAY_SIZE(armsse_variants); i++) { + TypeInfo ti = { + .name = armsse_variants[i].name, + .parent = TYPE_ARMSSE, + .class_init = iotkit_class_init, + .class_data = (void *)&armsse_variants[i], + }; + type_register(&ti); + } } -type_init(iotkit_register_types); +type_init(armsse_register_types); -- 2.20.1 Rename various internal uses of 'iotkit' in hw/arm/iotkit.c to 'armsse', for consistency. The remaining occurences are: * related to the devices TYPE_IOTKIT_SYSCTL, TYPE_IOTKIT_SYSINFO, etc, which this refactor is not touching * references that apply specifically to the IoTKit (like the lack of a private CPU region) * the vmstate, which keeps its old "iotkit" name for migration compatibility reasons Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-7-peter.maydell@linaro.org --- hw/arm/iotkit.c | 68 ++++++++++++++++++++++++------------------------- 1 file changed, 34 insertions(+), 34 deletions(-) diff --git a/hw/arm/iotkit.c b/hw/arm/iotkit.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/iotkit.c +++ b/hw/arm/iotkit.c @@ -XXX,XX +XXX,XX @@ static void nsccfg_handler(void *opaque, int n, int level) s->nsccfg = level; } -static void iotkit_forward_ppc(ARMSSE *s, const char *ppcname, int ppcnum) +static void armsse_forward_ppc(ARMSSE *s, const char *ppcname, int ppcnum) { /* Each of the 4 AHB and 4 APB PPCs that might be present in a * system using the ARMSSE has a collection of control lines which @@ -XXX,XX +XXX,XX @@ static void iotkit_forward_ppc(ARMSSE *s, const char *ppcname, int ppcnum) * code using the ARMSSE can wire them up to the PPCs. */ SplitIRQ *splitter = &s->ppc_irq_splitter[ppcnum]; - DeviceState *iotkitdev = DEVICE(s); + DeviceState *armssedev = DEVICE(s); DeviceState *dev_secctl = DEVICE(&s->secctl); DeviceState *dev_splitter = DEVICE(splitter); char *name; name = g_strdup_printf("%s_nonsec", ppcname); - qdev_pass_gpios(dev_secctl, iotkitdev, name); + qdev_pass_gpios(dev_secctl, armssedev, name); g_free(name); name = g_strdup_printf("%s_ap", ppcname); - qdev_pass_gpios(dev_secctl, iotkitdev, name); + qdev_pass_gpios(dev_secctl, armssedev, name); g_free(name); name = g_strdup_printf("%s_irq_enable", ppcname); - qdev_pass_gpios(dev_secctl, iotkitdev, name); + qdev_pass_gpios(dev_secctl, armssedev, name); g_free(name); name = g_strdup_printf("%s_irq_clear", ppcname); - qdev_pass_gpios(dev_secctl, iotkitdev, name); + qdev_pass_gpios(dev_secctl, armssedev, name); g_free(name); /* irq_status is a little more tricky, because we need to @@ -XXX,XX +XXX,XX @@ static void iotkit_forward_ppc(ARMSSE *s, const char *ppcname, int ppcnum) qdev_connect_gpio_out(dev_splitter, 1, qdev_get_gpio_in(DEVICE(&s->ppc_irq_orgate), ppcnum)); s->irq_status_in[ppcnum] = qdev_get_gpio_in(dev_splitter, 0); - qdev_init_gpio_in_named_with_opaque(iotkitdev, irq_status_forwarder, + qdev_init_gpio_in_named_with_opaque(armssedev, irq_status_forwarder, s->irq_status_in[ppcnum], name, 1); g_free(name); } -static void iotkit_forward_sec_resp_cfg(ARMSSE *s) +static void armsse_forward_sec_resp_cfg(ARMSSE *s) { /* Forward the 3rd output from the splitter device as a - * named GPIO output of the iotkit object. + * named GPIO output of the armsse object. */ DeviceState *dev = DEVICE(s); DeviceState *dev_splitter = DEVICE(&s->sec_resp_splitter); @@ -XXX,XX +XXX,XX @@ static void iotkit_forward_sec_resp_cfg(ARMSSE *s) qdev_connect_gpio_out(dev_splitter, 2, s->sec_resp_cfg_in); } -static void iotkit_init(Object *obj) +static void armsse_init(Object *obj) { ARMSSE *s = ARMSSE(obj); int i; - memory_region_init(&s->container, obj, "iotkit-container", UINT64_MAX); + memory_region_init(&s->container, obj, "armsse-container", UINT64_MAX); sysbus_init_child_obj(obj, "armv7m", &s->armv7m, sizeof(s->armv7m), TYPE_ARMV7M); @@ -XXX,XX +XXX,XX @@ static void iotkit_init(Object *obj) sizeof(s->nswatchdog), TYPE_CMSDK_APB_WATCHDOG); sysbus_init_child_obj(obj, "swatchdog", &s->swatchdog, sizeof(s->swatchdog), TYPE_CMSDK_APB_WATCHDOG); - sysbus_init_child_obj(obj, "iotkit-sysctl", &s->sysctl, + sysbus_init_child_obj(obj, "armsse-sysctl", &s->sysctl, sizeof(s->sysctl), TYPE_IOTKIT_SYSCTL); - sysbus_init_child_obj(obj, "iotkit-sysinfo", &s->sysinfo, + sysbus_init_child_obj(obj, "armsse-sysinfo", &s->sysinfo, sizeof(s->sysinfo), TYPE_IOTKIT_SYSINFO); object_initialize_child(obj, "nmi-orgate", &s->nmi_orgate, sizeof(s->nmi_orgate), TYPE_OR_IRQ, @@ -XXX,XX +XXX,XX @@ static void iotkit_init(Object *obj) } } -static void iotkit_exp_irq(void *opaque, int n, int level) +static void armsse_exp_irq(void *opaque, int n, int level) { ARMSSE *s = ARMSSE(opaque); qemu_set_irq(s->exp_irqs[n], level); } -static void iotkit_mpcexp_status(void *opaque, int n, int level) +static void armsse_mpcexp_status(void *opaque, int n, int level) { ARMSSE *s = ARMSSE(opaque); qemu_set_irq(s->mpcexp_status_in[n], level); } -static void iotkit_realize(DeviceState *dev, Error **errp) +static void armsse_realize(DeviceState *dev, Error **errp) { ARMSSE *s = ARMSSE(dev); int i; @@ -XXX,XX +XXX,XX @@ static void iotkit_realize(DeviceState *dev, Error **errp) for (i = 0; i < s->exp_numirq; i++) { s->exp_irqs[i] = qdev_get_gpio_in(DEVICE(&s->armv7m), i + 32); } - qdev_init_gpio_in_named(dev, iotkit_exp_irq, "EXP_IRQ", s->exp_numirq); + qdev_init_gpio_in_named(dev, armsse_exp_irq, "EXP_IRQ", s->exp_numirq); /* Set up the big aliases first */ make_alias(s, &s->alias1, "alias 1", 0x10000000, 0x10000000, 0x00000000); @@ -XXX,XX +XXX,XX @@ static void iotkit_realize(DeviceState *dev, Error **errp) qdev_get_gpio_in(dev_splitter, 0)); /* This RAM lives behind the Memory Protection Controller */ - memory_region_init_ram(&s->sram0, NULL, "iotkit.sram0", 0x00008000, &err); + memory_region_init_ram(&s->sram0, NULL, "armsse.sram0", 0x00008000, &err); if (err) { error_propagate(errp, err); return; @@ -XXX,XX +XXX,XX @@ static void iotkit_realize(DeviceState *dev, Error **errp) for (i = 0; i < IOTS_NUM_AHB_EXP_PPC; i++) { char *ppcname = g_strdup_printf("ahb_ppcexp%d", i); - iotkit_forward_ppc(s, ppcname, i); + armsse_forward_ppc(s, ppcname, i); g_free(ppcname); } for (i = 0; i < IOTS_NUM_APB_EXP_PPC; i++) { char *ppcname = g_strdup_printf("apb_ppcexp%d", i); - iotkit_forward_ppc(s, ppcname, i + IOTS_NUM_AHB_EXP_PPC); + armsse_forward_ppc(s, ppcname, i + IOTS_NUM_AHB_EXP_PPC); g_free(ppcname); } @@ -XXX,XX +XXX,XX @@ static void iotkit_realize(DeviceState *dev, Error **errp) /* Create GPIO inputs which will pass the line state for our * mpcexp_irq inputs to the correct splitter devices. */ - qdev_init_gpio_in_named(dev, iotkit_mpcexp_status, "mpcexp_status", + qdev_init_gpio_in_named(dev, armsse_mpcexp_status, "mpcexp_status", IOTS_NUM_EXP_MPC); - iotkit_forward_sec_resp_cfg(s); + armsse_forward_sec_resp_cfg(s); /* Forward the MSC related signals */ qdev_pass_gpios(dev_secctl, dev, "mscexp_status"); @@ -XXX,XX +XXX,XX @@ static void iotkit_realize(DeviceState *dev, Error **errp) system_clock_scale = NANOSECONDS_PER_SECOND / s->mainclk_frq; } -static void iotkit_idau_check(IDAUInterface *ii, uint32_t address, +static void armsse_idau_check(IDAUInterface *ii, uint32_t address, int *iregion, bool *exempt, bool *ns, bool *nsc) { /* @@ -XXX,XX +XXX,XX @@ static void iotkit_idau_check(IDAUInterface *ii, uint32_t address, *iregion = region; } -static const VMStateDescription iotkit_vmstate = { +static const VMStateDescription armsse_vmstate = { .name = "iotkit", .version_id = 1, .minimum_version_id = 1, @@ -XXX,XX +XXX,XX @@ static const VMStateDescription iotkit_vmstate = { } }; -static Property iotkit_properties[] = { +static Property armsse_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), @@ -XXX,XX +XXX,XX @@ static Property iotkit_properties[] = { DEFINE_PROP_END_OF_LIST() }; -static void iotkit_reset(DeviceState *dev) +static void armsse_reset(DeviceState *dev) { ARMSSE *s = ARMSSE(dev); s->nsccfg = 0; } -static void iotkit_class_init(ObjectClass *klass, void *data) +static void armsse_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); IDAUInterfaceClass *iic = IDAU_INTERFACE_CLASS(klass); ARMSSEClass *asc = ARMSSE_CLASS(klass); - dc->realize = iotkit_realize; - dc->vmsd = &iotkit_vmstate; - dc->props = iotkit_properties; - dc->reset = iotkit_reset; - iic->check = iotkit_idau_check; + dc->realize = armsse_realize; + dc->vmsd = &armsse_vmstate; + dc->props = armsse_properties; + dc->reset = armsse_reset; + iic->check = armsse_idau_check; asc->info = data; } @@ -XXX,XX +XXX,XX @@ static const TypeInfo armsse_info = { .name = TYPE_ARMSSE, .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(ARMSSE), - .instance_init = iotkit_init, + .instance_init = armsse_init, .abstract = true, .interfaces = (InterfaceInfo[]) { { TYPE_IDAU_INTERFACE }, @@ -XXX,XX +XXX,XX @@ static void armsse_register_types(void) TypeInfo ti = { .name = armsse_variants[i].name, .parent = TYPE_ARMSSE, - .class_init = iotkit_class_init, + .class_init = armsse_class_init, .class_data = (void *)&armsse_variants[i], }; type_register(&ti); -- 2.20.1 Rename the files that used to be iotkit.[ch] to armsse.[ch] to reflect the fact they new cover multiple Arm subsystems for embedded. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-8-peter.maydell@linaro.org --- hw/arm/Makefile.objs | 2 +- include/hw/arm/{iotkit.h => armsse.h} | 4 ++-- hw/arm/{iotkit.c => armsse.c} | 2 +- hw/arm/mps2-tz.c | 2 +- MAINTAINERS | 4 ++-- default-configs/arm-softmmu.mak | 2 +- 6 files changed, 8 insertions(+), 8 deletions(-) rename include/hw/arm/{iotkit.h => armsse.h} (99%) rename hw/arm/{iotkit.c => armsse.c} (99%) diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Makefile.objs +++ b/hw/arm/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_ASPEED_SOC) += aspeed_soc.o aspeed.o obj-$(CONFIG_MPS2) += mps2.o obj-$(CONFIG_MPS2) += mps2-tz.o obj-$(CONFIG_MSF2) += msf2-soc.o msf2-som.o -obj-$(CONFIG_IOTKIT) += iotkit.o +obj-$(CONFIG_ARMSSE) += armsse.o obj-$(CONFIG_FSL_IMX7) += fsl-imx7.o mcimx7d-sabre.o obj-$(CONFIG_ARM_SMMUV3) += smmu-common.o smmuv3.o obj-$(CONFIG_FSL_IMX6UL) += fsl-imx6ul.o mcimx6ul-evk.o diff --git a/include/hw/arm/iotkit.h b/include/hw/arm/armsse.h similarity index 99% rename from include/hw/arm/iotkit.h rename to include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/iotkit.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ * + named GPIO outputs mscexp_ns[0..15] */ -#ifndef IOTKIT_H -#define IOTKIT_H +#ifndef ARMSSE_H +#define ARMSSE_H #include "hw/sysbus.h" #include "hw/arm/armv7m.h" diff --git a/hw/arm/iotkit.c b/hw/arm/armsse.c similarity index 99% rename from hw/arm/iotkit.c rename to hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/iotkit.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ #include "trace.h" #include "hw/sysbus.h" #include "hw/registerfields.h" -#include "hw/arm/iotkit.h" +#include "hw/arm/armsse.h" #include "hw/arm/arm.h" struct ARMSSEInfo { diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/mps2-fpgaio.h" #include "hw/misc/tz-mpc.h" #include "hw/misc/tz-msc.h" -#include "hw/arm/iotkit.h" +#include "hw/arm/armsse.h" #include "hw/dma/pl080.h" #include "hw/ssi/pl022.h" #include "hw/devices.h" diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/arm/mps2.c F: hw/arm/mps2-tz.c F: hw/misc/mps2-*.c F: include/hw/misc/mps2-*.h -F: hw/arm/iotkit.c -F: include/hw/arm/iotkit.h +F: hw/arm/armsse.c +F: include/hw/arm/armsse.h F: hw/misc/iotkit-secctl.c F: include/hw/misc/iotkit-secctl.h F: hw/misc/iotkit-sysctl.c diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak index XXXXXXX..XXXXXXX 100644 --- a/default-configs/arm-softmmu.mak +++ b/default-configs/arm-softmmu.mak @@ -XXX,XX +XXX,XX @@ CONFIG_MPS2_SCC=y CONFIG_TZ_MPC=y CONFIG_TZ_MSC=y CONFIG_TZ_PPC=y -CONFIG_IOTKIT=y +CONFIG_ARMSSE=y CONFIG_IOTKIT_SECCTL=y CONFIG_IOTKIT_SYSCTL=y CONFIG_IOTKIT_SYSINFO=y -- 2.20.1 The SSE-200 has 4 banks of SRAM, each with its own internal Memory Protection Controller. The interrupt status for these extra MPCs appears in the same security controller SECMPCINTSTATUS register as the MPC for the IoTKit's single SRAM bank. Enhance the iotkit-secctl device to allow 4 MPCs. (If the particular IoTKit/SSE variant in use does not have all 4 MPCs then the unused inputs will simply result in the SECMPCINTSTATUS bits being zero as required.) The hardcoded constant "1"s in armsse.c indicate the actual number of SRAM MPCs the IoTKit has, and will be replaced in the following commit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-9-peter.maydell@linaro.org --- include/hw/misc/iotkit-secctl.h | 6 +++--- hw/arm/armsse.c | 6 +++--- hw/misc/iotkit-secctl.c | 5 +++-- 3 files changed, 9 insertions(+), 8 deletions(-) diff --git a/include/hw/misc/iotkit-secctl.h b/include/hw/misc/iotkit-secctl.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/iotkit-secctl.h +++ b/include/hw/misc/iotkit-secctl.h @@ -XXX,XX +XXX,XX @@ * + named GPIO outputs ahb_ppcexp{0,1,2,3}_irq_enable * + named GPIO outputs ahb_ppcexp{0,1,2,3}_irq_clear * + named GPIO inputs ahb_ppcexp{0,1,2,3}_irq_status - * Controlling the MPC in the IoTKit: - * + named GPIO input mpc_status + * Controlling the (up to) 4 MPCs in the IoTKit/SSE: + * + named GPIO inputs mpc_status[0..3] * Controlling each of the 16 expansion MPCs which a system using the IoTKit * might provide: * + named GPIO inputs mpcexp_status[0..15] @@ -XXX,XX +XXX,XX @@ #define IOTS_NUM_APB_EXP_PPC 4 #define IOTS_NUM_AHB_EXP_PPC 4 #define IOTS_NUM_EXP_MPC 16 -#define IOTS_NUM_MPC 1 +#define IOTS_NUM_MPC 4 #define IOTS_NUM_EXP_MSC 16 typedef struct IoTKitSecCtl IoTKitSecCtl; diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static void armsse_init(Object *obj) sizeof(s->mpc_irq_orgate), TYPE_OR_IRQ, &error_abort, NULL); - for (i = 0; i < ARRAY_SIZE(s->mpc_irq_splitter); i++) { + for (i = 0; i < IOTS_NUM_EXP_MPC + 1; i++) { char *name = g_strdup_printf("mpc-irq-splitter-%d", i); SplitIRQ *splitter = &s->mpc_irq_splitter[i]; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) /* We must OR together lines from the MPC splitters to go to the NVIC */ object_property_set_int(OBJECT(&s->mpc_irq_orgate), - IOTS_NUM_EXP_MPC + IOTS_NUM_MPC, "num-lines", &err); + IOTS_NUM_EXP_MPC + 1, "num-lines", &err); if (err) { error_propagate(errp, err); return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) } /* Wire up the splitters for the MPC IRQs */ - for (i = 0; i < IOTS_NUM_EXP_MPC + IOTS_NUM_MPC; i++) { + for (i = 0; i < IOTS_NUM_EXP_MPC + 1; i++) { SplitIRQ *splitter = &s->mpc_irq_splitter[i]; DeviceState *dev_splitter = DEVICE(splitter); diff --git a/hw/misc/iotkit-secctl.c b/hw/misc/iotkit-secctl.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/iotkit-secctl.c +++ b/hw/misc/iotkit-secctl.c @@ -XXX,XX +XXX,XX @@ static void iotkit_secctl_mpc_status(void *opaque, int n, int level) { IoTKitSecCtl *s = IOTKIT_SECCTL(opaque); - s->mpcintstatus = deposit32(s->mpcintstatus, 0, 1, !!level); + s->mpcintstatus = deposit32(s->mpcintstatus, n, 1, !!level); } static void iotkit_secctl_mpcexp_status(void *opaque, int n, int level) @@ -XXX,XX +XXX,XX @@ static void iotkit_secctl_init(Object *obj) qdev_init_gpio_out_named(dev, &s->sec_resp_cfg, "sec_resp_cfg", 1); qdev_init_gpio_out_named(dev, &s->nsc_cfg_irq, "nsc_cfg", 1); - qdev_init_gpio_in_named(dev, iotkit_secctl_mpc_status, "mpc_status", 1); + qdev_init_gpio_in_named(dev, iotkit_secctl_mpc_status, "mpc_status", + IOTS_NUM_MPC); qdev_init_gpio_in_named(dev, iotkit_secctl_mpcexp_status, "mpcexp_status", IOTS_NUM_EXP_MPC); -- 2.20.1 The SSE-200 has four banks of SRAM, each with its own Memory Protection Controller, where the IoTKit has only one. Make the number of SRAM banks a field in ARMSSEInfo. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-10-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 9 +++-- hw/arm/armsse.c | 78 ++++++++++++++++++++++++++--------------- 2 files changed, 56 insertions(+), 31 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ #define NUM_EXTERNAL_PPCS (IOTS_NUM_AHB_EXP_PPC + IOTS_NUM_APB_EXP_PPC) #define NUM_PPCS (NUM_EXTERNAL_PPCS + 2) +#define MAX_SRAM_BANKS 4 +#if MAX_SRAM_BANKS > IOTS_NUM_MPC +#error Too many SRAM banks +#endif + typedef struct ARMSSE { /*< private >*/ SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ typedef struct ARMSSE { IoTKitSecCtl secctl; TZPPC apb_ppc0; TZPPC apb_ppc1; - TZMPC mpc; + TZMPC mpc[IOTS_NUM_MPC]; CMSDKAPBTIMER timer0; CMSDKAPBTIMER timer1; CMSDKAPBTIMER s32ktimer; @@ -XXX,XX +XXX,XX @@ typedef struct ARMSSE { MemoryRegion alias1; MemoryRegion alias2; MemoryRegion alias3; - MemoryRegion sram0; + MemoryRegion sram[MAX_SRAM_BANKS]; qemu_irq *exp_irqs; qemu_irq ppc0_irq; diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ struct ARMSSEInfo { const char *name; + int sram_banks; }; static const ARMSSEInfo armsse_variants[] = { { .name = TYPE_IOTKIT, + .sram_banks = 1, }, }; @@ -XXX,XX +XXX,XX @@ static void armsse_forward_sec_resp_cfg(ARMSSE *s) static void armsse_init(Object *obj) { ARMSSE *s = ARMSSE(obj); + ARMSSEClass *asc = ARMSSE_GET_CLASS(obj); + const ARMSSEInfo *info = asc->info; int i; + assert(info->sram_banks <= MAX_SRAM_BANKS); + memory_region_init(&s->container, obj, "armsse-container", UINT64_MAX); sysbus_init_child_obj(obj, "armv7m", &s->armv7m, sizeof(s->armv7m), @@ -XXX,XX +XXX,XX @@ static void armsse_init(Object *obj) TYPE_TZ_PPC); sysbus_init_child_obj(obj, "apb-ppc1", &s->apb_ppc1, sizeof(s->apb_ppc1), TYPE_TZ_PPC); - sysbus_init_child_obj(obj, "mpc", &s->mpc, sizeof(s->mpc), TYPE_TZ_MPC); + for (i = 0; i < info->sram_banks; i++) { + char *name = g_strdup_printf("mpc%d", i); + sysbus_init_child_obj(obj, name, &s->mpc[i], + sizeof(s->mpc[i]), TYPE_TZ_MPC); + g_free(name); + } object_initialize_child(obj, "mpc-irq-orgate", &s->mpc_irq_orgate, sizeof(s->mpc_irq_orgate), TYPE_OR_IRQ, &error_abort, NULL); - for (i = 0; i < IOTS_NUM_EXP_MPC + 1; i++) { + for (i = 0; i < IOTS_NUM_EXP_MPC + info->sram_banks; i++) { char *name = g_strdup_printf("mpc-irq-splitter-%d", i); SplitIRQ *splitter = &s->mpc_irq_splitter[i]; @@ -XXX,XX +XXX,XX @@ static void armsse_mpcexp_status(void *opaque, int n, int level) static void armsse_realize(DeviceState *dev, Error **errp) { ARMSSE *s = ARMSSE(dev); + ARMSSEClass *asc = ARMSSE_GET_CLASS(dev); + const ARMSSEInfo *info = asc->info; int i; MemoryRegion *mr; Error *err = NULL; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) qdev_connect_gpio_out_named(dev_secctl, "sec_resp_cfg", 0, qdev_get_gpio_in(dev_splitter, 0)); - /* This RAM lives behind the Memory Protection Controller */ - memory_region_init_ram(&s->sram0, NULL, "armsse.sram0", 0x00008000, &err); - if (err) { - error_propagate(errp, err); - return; + /* Each SRAM bank lives behind its own Memory Protection Controller */ + for (i = 0; i < info->sram_banks; i++) { + char *ramname = g_strdup_printf("armsse.sram%d", i); + SysBusDevice *sbd_mpc; + + memory_region_init_ram(&s->sram[i], NULL, ramname, 0x00008000, &err); + g_free(ramname); + if (err) { + error_propagate(errp, err); + return; + } + object_property_set_link(OBJECT(&s->mpc[i]), OBJECT(&s->sram[i]), + "downstream", &err); + if (err) { + error_propagate(errp, err); + return; + } + object_property_set_bool(OBJECT(&s->mpc[i]), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + /* Map the upstream end of the MPC into the right place... */ + sbd_mpc = SYS_BUS_DEVICE(&s->mpc[i]); + memory_region_add_subregion(&s->container, 0x20000000 + i * 0x8000, + sysbus_mmio_get_region(sbd_mpc, 1)); + /* ...and its register interface */ + memory_region_add_subregion(&s->container, 0x50083000 + i * 0x1000, + sysbus_mmio_get_region(sbd_mpc, 0)); } - object_property_set_link(OBJECT(&s->mpc), OBJECT(&s->sram0), - "downstream", &err); - if (err) { - error_propagate(errp, err); - return; - } - object_property_set_bool(OBJECT(&s->mpc), true, "realized", &err); - if (err) { - error_propagate(errp, err); - return; - } - /* Map the upstream end of the MPC into the right place... */ - memory_region_add_subregion(&s->container, 0x20000000, - sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->mpc), - 1)); - /* ...and its register interface */ - memory_region_add_subregion(&s->container, 0x50083000, - sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->mpc), - 0)); /* We must OR together lines from the MPC splitters to go to the NVIC */ object_property_set_int(OBJECT(&s->mpc_irq_orgate), - IOTS_NUM_EXP_MPC + 1, "num-lines", &err); + IOTS_NUM_EXP_MPC + info->sram_banks, + "num-lines", &err); if (err) { error_propagate(errp, err); return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) } /* Wire up the splitters for the MPC IRQs */ - for (i = 0; i < IOTS_NUM_EXP_MPC + 1; i++) { + for (i = 0; i < IOTS_NUM_EXP_MPC + info->sram_banks; i++) { SplitIRQ *splitter = &s->mpc_irq_splitter[i]; DeviceState *dev_splitter = DEVICE(splitter); @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) "mpcexp_status", i)); } else { /* Splitter input is from our own MPC */ - qdev_connect_gpio_out_named(DEVICE(&s->mpc), "irq", 0, + qdev_connect_gpio_out_named(DEVICE(&s->mpc[i - IOTS_NUM_EXP_MPC]), + "irq", 0, qdev_get_gpio_in(dev_splitter, 0)); qdev_connect_gpio_out(dev_splitter, 0, qdev_get_gpio_in_named(dev_secctl, -- 2.20.1 For the IoTKit the SRAM bank size is always 32K (15 bits); for the SSE-200 this is a configurable parameter, which defaults to 32K but can be changed when it is built into a particular SoC. For instance the Musca-B1 board sets it to 128K (17 bits). Make the bank size a QOM property. We follow the SSE-200 hardware in naming the parameter SRAM_ADDR_WIDTH, which specifies the number of address bits of a single SRAM bank. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-11-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 1 + hw/arm/armsse.c | 18 ++++++++++++++++-- 2 files changed, 17 insertions(+), 2 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ typedef struct ARMSSE { MemoryRegion *board_memory; uint32_t exp_numirq; uint32_t mainclk_frq; + uint32_t sram_addr_width; } ARMSSE; typedef struct ARMSSEInfo ARMSSEInfo; diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) DeviceState *dev_apb_ppc1; DeviceState *dev_secctl; DeviceState *dev_splitter; + uint32_t addr_width_max; if (!s->board_memory) { error_setg(errp, "memory property was not set"); @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) return; } + /* max SRAM_ADDR_WIDTH: 24 - log2(SRAM_NUM_BANK) */ + assert(is_power_of_2(info->sram_banks)); + addr_width_max = 24 - ctz32(info->sram_banks); + if (s->sram_addr_width < 1 || s->sram_addr_width > addr_width_max) { + error_setg(errp, "SRAM_ADDR_WIDTH must be between 1 and %d", + addr_width_max); + return; + } + /* Handling of which devices should be available only to secure * code is usually done differently for M profile than for A profile. * Instead of putting some devices only into the secure address space, @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) for (i = 0; i < info->sram_banks; i++) { char *ramname = g_strdup_printf("armsse.sram%d", i); SysBusDevice *sbd_mpc; + uint32_t sram_bank_size = 1 << s->sram_addr_width; - memory_region_init_ram(&s->sram[i], NULL, ramname, 0x00008000, &err); + memory_region_init_ram(&s->sram[i], NULL, ramname, + sram_bank_size, &err); g_free(ramname); if (err) { error_propagate(errp, err); @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) } /* Map the upstream end of the MPC into the right place... */ sbd_mpc = SYS_BUS_DEVICE(&s->mpc[i]); - memory_region_add_subregion(&s->container, 0x20000000 + i * 0x8000, + memory_region_add_subregion(&s->container, + 0x20000000 + i * sram_bank_size, sysbus_mmio_get_region(sbd_mpc, 1)); /* ...and its register interface */ memory_region_add_subregion(&s->container, 0x50083000 + i * 0x1000, @@ -XXX,XX +XXX,XX @@ static Property armsse_properties[] = { MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), DEFINE_PROP_UINT32("MAINCLK", ARMSSE, mainclk_frq, 0), + DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_END_OF_LIST() }; -- 2.20.1 The SSE-200 has two Cortex-M33 CPUs. These see the same view of memory, with the exception of the "private CPU region" which has per-CPU devices. Internal device interrupts for SSE-200 devices are mostly wired up to both CPUs, with the exception of a few per-CPU devices. External GPIO inputs on the SSE-200 device are provided for the second CPU's interrupts above 32, as is already the case for the first CPU. Refactor the code to support creation of multiple CPUs. For the moment we leave all CPUs with the same view of memory: this will not work in the multiple-CPU case, but we will fix this in the following commit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-12-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 21 +++- hw/arm/armsse.c | 206 ++++++++++++++++++++++++++++++++-------- 2 files changed, 180 insertions(+), 47 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ * + QOM property "memory" is a MemoryRegion containing the devices provided * by the board model. * + QOM property "MAINCLK" is the frequency of the main system clock - * + QOM property "EXP_NUMIRQ" sets the number of expansion interrupts - * + Named GPIO inputs "EXP_IRQ" 0..n are the expansion interrupts, which - * are wired to the NVIC lines 32 .. n+32 + * + QOM property "EXP_NUMIRQ" sets the number of expansion interrupts. + * (In hardware, the SSE-200 permits the number of expansion interrupts + * for the two CPUs to be configured separately, but we restrict it to + * being the same for both, to avoid having to have separate Property + * lists for different variants. This restriction can be relaxed later + * if necessary.) + * + Named GPIO inputs "EXP_IRQ" 0..n are the expansion interrupts for CPU 0, + * which are wired to its NVIC lines 32 .. n+32 + * + Named GPIO inputs "EXP_CPU1_IRQ" 0..n are the expansion interrupts for + * CPU 1, which are wired to its NVIC lines 32 .. n+32 * + sysbus MMIO region 0 is the "AHB Slave Expansion" which allows * bus master devices in the board model to make transactions into * all the devices and memory areas in the IoTKit @@ -XXX,XX +XXX,XX @@ #error Too many SRAM banks #endif +#define SSE_MAX_CPUS 2 + typedef struct ARMSSE { /*< private >*/ SysBusDevice parent_obj; /*< public >*/ - ARMv7MState armv7m; + ARMv7MState armv7m[SSE_MAX_CPUS]; IoTKitSecCtl secctl; TZPPC apb_ppc0; TZPPC apb_ppc1; @@ -XXX,XX +XXX,XX @@ typedef struct ARMSSE { qemu_or_irq mpc_irq_orgate; qemu_or_irq nmi_orgate; + SplitIRQ cpu_irq_splitter[32]; + CMSDKAPBDualTimer dualtimer; CMSDKAPBWatchdog s32kwatchdog; @@ -XXX,XX +XXX,XX @@ typedef struct ARMSSE { MemoryRegion alias3; MemoryRegion sram[MAX_SRAM_BANKS]; - qemu_irq *exp_irqs; + qemu_irq *exp_irqs[SSE_MAX_CPUS]; qemu_irq ppc0_irq; qemu_irq ppc1_irq; qemu_irq sec_resp_cfg; diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ struct ARMSSEInfo { const char *name; int sram_banks; + int num_cpus; }; static const ARMSSEInfo armsse_variants[] = { { .name = TYPE_IOTKIT, .sram_banks = 1, + .num_cpus = 1, }, }; /* Clock frequency in HZ of the 32KHz "slow clock" */ #define S32KCLK (32 * 1000) +/* Is internal IRQ n shared between CPUs in a multi-core SSE ? */ +static bool irq_is_common[32] = { + [0 ... 5] = true, + /* 6, 7: per-CPU MHU interrupts */ + [8 ... 12] = true, + /* 13: per-CPU icache interrupt */ + /* 14: reserved */ + [15 ... 20] = true, + /* 21: reserved */ + [22 ... 26] = true, + /* 27: reserved */ + /* 28, 29: per-CPU CTI interrupts */ + /* 30, 31: reserved */ +}; + /* Create an alias region of @size bytes starting at @base * which mirrors the memory starting at @orig. */ @@ -XXX,XX +XXX,XX @@ static void armsse_init(Object *obj) int i; assert(info->sram_banks <= MAX_SRAM_BANKS); + assert(info->num_cpus <= SSE_MAX_CPUS); memory_region_init(&s->container, obj, "armsse-container", UINT64_MAX); - sysbus_init_child_obj(obj, "armv7m", &s->armv7m, sizeof(s->armv7m), - TYPE_ARMV7M); - qdev_prop_set_string(DEVICE(&s->armv7m), "cpu-type", - ARM_CPU_TYPE_NAME("cortex-m33")); + for (i = 0; i < info->num_cpus; i++) { + char *name = g_strdup_printf("armv7m%d", i); + sysbus_init_child_obj(obj, name, &s->armv7m[i], sizeof(s->armv7m), + TYPE_ARMV7M); + qdev_prop_set_string(DEVICE(&s->armv7m[i]), "cpu-type", + ARM_CPU_TYPE_NAME("cortex-m33")); + g_free(name); + } sysbus_init_child_obj(obj, "secctl", &s->secctl, sizeof(s->secctl), TYPE_IOTKIT_SECCTL); @@ -XXX,XX +XXX,XX @@ static void armsse_init(Object *obj) TYPE_SPLIT_IRQ, &error_abort, NULL); g_free(name); } + if (info->num_cpus > 1) { + for (i = 0; i < ARRAY_SIZE(s->cpu_irq_splitter); i++) { + if (irq_is_common[i]) { + char *name = g_strdup_printf("cpu-irq-splitter%d", i); + SplitIRQ *splitter = &s->cpu_irq_splitter[i]; + + object_initialize_child(obj, name, splitter, sizeof(*splitter), + TYPE_SPLIT_IRQ, &error_abort, NULL); + g_free(name); + } + } + } } static void armsse_exp_irq(void *opaque, int n, int level) { - ARMSSE *s = ARMSSE(opaque); + qemu_irq *irqarray = opaque; - qemu_set_irq(s->exp_irqs[n], level); + qemu_set_irq(irqarray[n], level); } static void armsse_mpcexp_status(void *opaque, int n, int level) @@ -XXX,XX +XXX,XX @@ static void armsse_mpcexp_status(void *opaque, int n, int level) qemu_set_irq(s->mpcexp_status_in[n], level); } +static qemu_irq armsse_get_common_irq_in(ARMSSE *s, int irqno) +{ + /* + * Return a qemu_irq which can be used to signal IRQ n to + * all CPUs in the SSE. + */ + ARMSSEClass *asc = ARMSSE_GET_CLASS(s); + const ARMSSEInfo *info = asc->info; + + assert(irq_is_common[irqno]); + + if (info->num_cpus == 1) { + /* Only one CPU -- just connect directly to it */ + return qdev_get_gpio_in(DEVICE(&s->armv7m[0]), irqno); + } else { + /* Connect to the splitter which feeds all CPUs */ + return qdev_get_gpio_in(DEVICE(&s->cpu_irq_splitter[irqno]), 0); + } +} + static void armsse_realize(DeviceState *dev, Error **errp) { ARMSSE *s = ARMSSE(dev); @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) memory_region_add_subregion_overlap(&s->container, 0, s->board_memory, -1); - qdev_prop_set_uint32(DEVICE(&s->armv7m), "num-irq", s->exp_numirq + 32); - /* In real hardware the initial Secure VTOR is set from the INITSVTOR0 - * register in the IoT Kit System Control Register block, and the - * initial value of that is in turn specifiable by the FPGA that - * instantiates the IoT Kit. In QEMU we don't implement this wrinkle, - * and simply set the CPU's init-svtor to the IoT Kit default value. - */ - qdev_prop_set_uint32(DEVICE(&s->armv7m), "init-svtor", 0x10000000); - object_property_set_link(OBJECT(&s->armv7m), OBJECT(&s->container), - "memory", &err); - if (err) { - error_propagate(errp, err); - return; - } - object_property_set_link(OBJECT(&s->armv7m), OBJECT(s), "idau", &err); - if (err) { - error_propagate(errp, err); - return; - } - object_property_set_bool(OBJECT(&s->armv7m), true, "realized", &err); - if (err) { - error_propagate(errp, err); - return; + for (i = 0; i < info->num_cpus; i++) { + DeviceState *cpudev = DEVICE(&s->armv7m[i]); + Object *cpuobj = OBJECT(&s->armv7m[i]); + int j; + char *gpioname; + + qdev_prop_set_uint32(cpudev, "num-irq", s->exp_numirq + 32); + /* + * In real hardware the initial Secure VTOR is set from the INITSVTOR0 + * register in the IoT Kit System Control Register block, and the + * initial value of that is in turn specifiable by the FPGA that + * instantiates the IoT Kit. In QEMU we don't implement this wrinkle, + * and simply set the CPU's init-svtor to the IoT Kit default value. + * In SSE-200 the situation is similar, except that the default value + * is a reset-time signal input. Typically a board using the SSE-200 + * will have a system control processor whose boot firmware initializes + * the INITSVTOR* registers before powering up the CPUs in any case, + * so the hardware's default value doesn't matter. QEMU doesn't emulate + * the control processor, so instead we behave in the way that the + * firmware does. All boards currently known about have firmware that + * sets the INITSVTOR0 and INITSVTOR1 registers to 0x10000000, like the + * IoTKit default. We can make this more configurable if necessary. + */ + qdev_prop_set_uint32(cpudev, "init-svtor", 0x10000000); + /* + * Start all CPUs except CPU0 powered down. In real hardware it is + * a configurable property of the SSE-200 which CPUs start powered up + * (via the CPUWAIT0_RST and CPUWAIT1_RST parameters), but since all + * the boards we care about start CPU0 and leave CPU1 powered off, + * we hard-code that for now. We can add QOM properties for this + * later if necessary. + */ + if (i > 0) { + object_property_set_bool(cpuobj, true, "start-powered-off", &err); + if (err) { + error_propagate(errp, err); + return; + } + } + object_property_set_link(cpuobj, OBJECT(&s->container), "memory", &err); + if (err) { + error_propagate(errp, err); + return; + } + object_property_set_link(cpuobj, OBJECT(s), "idau", &err); + if (err) { + error_propagate(errp, err); + return; + } + object_property_set_bool(cpuobj, true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + + /* Connect EXP_IRQ/EXP_CPUn_IRQ GPIOs to the NVIC's lines 32 and up */ + s->exp_irqs[i] = g_new(qemu_irq, s->exp_numirq); + for (j = 0; j < s->exp_numirq; j++) { + s->exp_irqs[i][j] = qdev_get_gpio_in(cpudev, i + 32); + } + if (i == 0) { + gpioname = g_strdup("EXP_IRQ"); + } else { + gpioname = g_strdup_printf("EXP_CPU%d_IRQ", i); + } + qdev_init_gpio_in_named_with_opaque(dev, armsse_exp_irq, + s->exp_irqs[i], + gpioname, s->exp_numirq); + g_free(gpioname); } - /* Connect our EXP_IRQ GPIOs to the NVIC's lines 32 and up. */ - s->exp_irqs = g_new(qemu_irq, s->exp_numirq); - for (i = 0; i < s->exp_numirq; i++) { - s->exp_irqs[i] = qdev_get_gpio_in(DEVICE(&s->armv7m), i + 32); + /* Wire up the splitters that connect common IRQs to all CPUs */ + if (info->num_cpus > 1) { + for (i = 0; i < ARRAY_SIZE(s->cpu_irq_splitter); i++) { + if (irq_is_common[i]) { + Object *splitter = OBJECT(&s->cpu_irq_splitter[i]); + DeviceState *devs = DEVICE(splitter); + int cpunum; + + object_property_set_int(splitter, info->num_cpus, + "num-lines", &err); + if (err) { + error_propagate(errp, err); + return; + } + object_property_set_bool(splitter, true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + for (cpunum = 0; cpunum < info->num_cpus; cpunum++) { + DeviceState *cpudev = DEVICE(&s->armv7m[cpunum]); + + qdev_connect_gpio_out(devs, cpunum, + qdev_get_gpio_in(cpudev, i)); + } + } + } } - qdev_init_gpio_in_named(dev, armsse_exp_irq, "EXP_IRQ", s->exp_numirq); /* Set up the big aliases first */ make_alias(s, &s->alias1, "alias 1", 0x10000000, 0x10000000, 0x00000000); @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) return; } qdev_connect_gpio_out(DEVICE(&s->mpc_irq_orgate), 0, - qdev_get_gpio_in(DEVICE(&s->armv7m), 9)); + armsse_get_common_irq_in(s, 9)); /* Devices behind APB PPC0: * 0x40000000: timer0 @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) return; } sysbus_connect_irq(SYS_BUS_DEVICE(&s->timer0), 0, - qdev_get_gpio_in(DEVICE(&s->armv7m), 3)); + armsse_get_common_irq_in(s, 3)); mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->timer0), 0); object_property_set_link(OBJECT(&s->apb_ppc0), OBJECT(mr), "port[0]", &err); if (err) { @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) return; } sysbus_connect_irq(SYS_BUS_DEVICE(&s->timer1), 0, - qdev_get_gpio_in(DEVICE(&s->armv7m), 4)); + armsse_get_common_irq_in(s, 4)); mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->timer1), 0); object_property_set_link(OBJECT(&s->apb_ppc0), OBJECT(mr), "port[1]", &err); if (err) { @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) return; } sysbus_connect_irq(SYS_BUS_DEVICE(&s->dualtimer), 0, - qdev_get_gpio_in(DEVICE(&s->armv7m), 5)); + armsse_get_common_irq_in(s, 5)); mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->dualtimer), 0); object_property_set_link(OBJECT(&s->apb_ppc0), OBJECT(mr), "port[2]", &err); if (err) { @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) return; } qdev_connect_gpio_out(DEVICE(&s->ppc_irq_orgate), 0, - qdev_get_gpio_in(DEVICE(&s->armv7m), 10)); + armsse_get_common_irq_in(s, 10)); /* 0x40010000 .. 0x4001ffff: private CPU region: unused in IoTKit */ @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) return; } sysbus_connect_irq(SYS_BUS_DEVICE(&s->s32ktimer), 0, - qdev_get_gpio_in(DEVICE(&s->armv7m), 2)); + armsse_get_common_irq_in(s, 2)); mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->s32ktimer), 0); object_property_set_link(OBJECT(&s->apb_ppc1), OBJECT(mr), "port[0]", &err); if (err) { @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) return; } sysbus_connect_irq(SYS_BUS_DEVICE(&s->nswatchdog), 0, - qdev_get_gpio_in(DEVICE(&s->armv7m), 1)); + armsse_get_common_irq_in(s, 1)); sysbus_mmio_map(SYS_BUS_DEVICE(&s->nswatchdog), 0, 0x40081000); qdev_prop_set_uint32(DEVICE(&s->swatchdog), "wdogclk-frq", s->mainclk_frq); @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) qdev_pass_gpios(dev_secctl, dev, "mscexp_clear"); qdev_pass_gpios(dev_secctl, dev, "mscexp_ns"); qdev_connect_gpio_out_named(dev_secctl, "msc_irq", 0, - qdev_get_gpio_in(DEVICE(&s->armv7m), 11)); + armsse_get_common_irq_in(s, 11)); /* * Expose our container region to the board model; this corresponds -- 2.20.1 Give each CPU its own container memory region. This is necessary for two reasons: * some devices are instantiated one per CPU and the CPU sees only its own device * since a memory region can only be put into one container, we must give each armv7m object a different MemoryRegion as its 'memory' property, or a dual-CPU configuration will assert on realize when the second armv7m object tries to put the MR into a container when it is already in the first armv7m object's container Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-13-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 10 ++++++++++ hw/arm/armsse.c | 22 ++++++++++++++++++++-- 2 files changed, 30 insertions(+), 2 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ typedef struct ARMSSE { IoTKitSysCtl sysctl; IoTKitSysCtl sysinfo; + /* + * 'container' holds all devices seen by all CPUs. + * 'cpu_container[i]' is the view that CPU i has: this has the + * per-CPU devices of that CPU, plus as the background 'container' + * (or an alias of it, since we can only use it directly once). + * container_alias[i] is the alias of 'container' used by CPU i+1; + * CPU 0 can use 'container' directly. + */ MemoryRegion container; + MemoryRegion container_alias[SSE_MAX_CPUS - 1]; + MemoryRegion cpu_container[SSE_MAX_CPUS]; MemoryRegion alias1; MemoryRegion alias2; MemoryRegion alias3; diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static void armsse_init(Object *obj) qdev_prop_set_string(DEVICE(&s->armv7m[i]), "cpu-type", ARM_CPU_TYPE_NAME("cortex-m33")); g_free(name); + name = g_strdup_printf("arm-sse-cpu-container%d", i); + memory_region_init(&s->cpu_container[i], obj, name, UINT64_MAX); + g_free(name); + if (i > 0) { + name = g_strdup_printf("arm-sse-container-alias%d", i); + memory_region_init_alias(&s->container_alias[i - 1], obj, + name, &s->container, 0, UINT64_MAX); + g_free(name); + } } sysbus_init_child_obj(obj, "secctl", &s->secctl, sizeof(s->secctl), @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) * 0x50000000..0x5fffffff alias of 0x40000000..0x4fffffff */ - memory_region_add_subregion_overlap(&s->container, 0, s->board_memory, -1); + memory_region_add_subregion_overlap(&s->container, 0, s->board_memory, -2); for (i = 0; i < info->num_cpus; i++) { DeviceState *cpudev = DEVICE(&s->armv7m[i]); @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) return; } } - object_property_set_link(cpuobj, OBJECT(&s->container), "memory", &err); + + if (i > 0) { + memory_region_add_subregion_overlap(&s->cpu_container[i], 0, + &s->container_alias[i - 1], -1); + } else { + memory_region_add_subregion_overlap(&s->cpu_container[i], 0, + &s->container, -1); + } + object_property_set_link(cpuobj, OBJECT(&s->cpu_container[i]), + "memory", &err); if (err) { error_propagate(errp, err); return; -- 2.20.1 Create a cluster object to hold each CPU in the SSE. They are logically distinct and may be configured differently (for instance one may not have an FPU where the other does). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-14-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 2 ++ hw/arm/armsse.c | 31 ++++++++++++++++++++++++++++--- 2 files changed, 30 insertions(+), 3 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/iotkit-sysinfo.h" #include "hw/or-irq.h" #include "hw/core/split-irq.h" +#include "hw/cpu/cluster.h" #define TYPE_ARMSSE "arm-sse" #define ARMSSE(obj) OBJECT_CHECK(ARMSSE, (obj), TYPE_ARMSSE) @@ -XXX,XX +XXX,XX @@ typedef struct ARMSSE { /*< public >*/ ARMv7MState armv7m[SSE_MAX_CPUS]; + CPUClusterState cluster[SSE_MAX_CPUS]; IoTKitSecCtl secctl; TZPPC apb_ppc0; TZPPC apb_ppc1; diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static void armsse_init(Object *obj) memory_region_init(&s->container, obj, "armsse-container", UINT64_MAX); for (i = 0; i < info->num_cpus; i++) { - char *name = g_strdup_printf("armv7m%d", i); - sysbus_init_child_obj(obj, name, &s->armv7m[i], sizeof(s->armv7m), - TYPE_ARMV7M); + /* + * We put each CPU in its own cluster as they are logically + * distinct and may be configured differently. + */ + char *name; + + name = g_strdup_printf("cluster%d", i); + object_initialize_child(obj, name, &s->cluster[i], + sizeof(s->cluster[i]), TYPE_CPU_CLUSTER, + &error_abort, NULL); + qdev_prop_set_uint32(DEVICE(&s->cluster[i]), "cluster-id", i); + g_free(name); + + name = g_strdup_printf("armv7m%d", i); + sysbus_init_child_obj(OBJECT(&s->cluster[i]), name, + &s->armv7m[i], sizeof(s->armv7m), TYPE_ARMV7M); qdev_prop_set_string(DEVICE(&s->armv7m[i]), "cpu-type", ARM_CPU_TYPE_NAME("cortex-m33")); g_free(name); @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) error_propagate(errp, err); return; } + /* + * The cluster must be realized after the armv7m container, as + * the container's CPU object is only created on realize, and the + * CPU must exist and have been parented into the cluster before + * the cluster is realized. + */ + object_property_set_bool(OBJECT(&s->cluster[i]), + true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } /* Connect EXP_IRQ/EXP_CPUn_IRQ GPIOs to the NVIC's lines 32 and up */ s->exp_irqs[i] = g_new(qemu_irq, s->exp_numirq); -- 2.20.1 The SYS_VERSION and SYS_CONFIG register values differ between the IoTKit and SSE-200. Make them configurable via QOM properties rather than hard-coded, and set them appropriately in the ARMSSE code that instantiates the IOTKIT_SYSINFO device. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-15-peter.maydell@linaro.org --- include/hw/misc/iotkit-sysinfo.h | 6 ++++ hw/arm/armsse.c | 51 ++++++++++++++++++++++++++++++++ hw/misc/iotkit-sysinfo.c | 15 ++++++++-- 3 files changed, 70 insertions(+), 2 deletions(-) diff --git a/include/hw/misc/iotkit-sysinfo.h b/include/hw/misc/iotkit-sysinfo.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/iotkit-sysinfo.h +++ b/include/hw/misc/iotkit-sysinfo.h @@ -XXX,XX +XXX,XX @@ * Arm IoTKit and documented in * http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ecm0601256/index.html * QEMU interface: + * + QOM property "SYS_VERSION": value to use for SYS_VERSION register + * + QOM property "SYS_CONFIG": value to use for SYS_CONFIG register * + sysbus MMIO region 0: the system information register bank */ @@ -XXX,XX +XXX,XX @@ typedef struct IoTKitSysInfo { /*< public >*/ MemoryRegion iomem; + + /* Properties */ + uint32_t sys_version; + uint32_t sys_config; } IoTKitSysInfo; #endif diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/armsse.h" #include "hw/arm/arm.h" +/* Format of the System Information block SYS_CONFIG register */ +typedef enum SysConfigFormat { + IoTKitFormat, + SSE200Format, +} SysConfigFormat; + struct ARMSSEInfo { const char *name; int sram_banks; int num_cpus; + uint32_t sys_version; + SysConfigFormat sys_config_format; }; static const ARMSSEInfo armsse_variants[] = { @@ -XXX,XX +XXX,XX @@ static const ARMSSEInfo armsse_variants[] = { .name = TYPE_IOTKIT, .sram_banks = 1, .num_cpus = 1, + .sys_version = 0x41743, + .sys_config_format = IoTKitFormat, }, }; +static uint32_t armsse_sys_config_value(ARMSSE *s, const ARMSSEInfo *info) +{ + /* Return the SYS_CONFIG value for this SSE */ + uint32_t sys_config; + + switch (info->sys_config_format) { + case IoTKitFormat: + sys_config = 0; + sys_config = deposit32(sys_config, 0, 4, info->sram_banks); + sys_config = deposit32(sys_config, 4, 4, s->sram_addr_width - 12); + break; + case SSE200Format: + sys_config = 0; + sys_config = deposit32(sys_config, 0, 4, info->sram_banks); + sys_config = deposit32(sys_config, 4, 5, s->sram_addr_width); + sys_config = deposit32(sys_config, 24, 4, 2); + if (info->num_cpus > 1) { + sys_config = deposit32(sys_config, 10, 1, 1); + sys_config = deposit32(sys_config, 20, 4, info->sram_banks - 1); + sys_config = deposit32(sys_config, 28, 4, 2); + } + break; + default: + g_assert_not_reached(); + } + return sys_config; +} + /* Clock frequency in HZ of the 32KHz "slow clock" */ #define S32KCLK (32 * 1000) @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) qdev_get_gpio_in_named(dev_apb_ppc1, "cfg_sec_resp", 0)); + object_property_set_int(OBJECT(&s->sysinfo), info->sys_version, + "SYS_VERSION", &err); + if (err) { + error_propagate(errp, err); + return; + } + object_property_set_int(OBJECT(&s->sysinfo), + armsse_sys_config_value(s, info), + "SYS_CONFIG", &err); + if (err) { + error_propagate(errp, err); + return; + } object_property_set_bool(OBJECT(&s->sysinfo), true, "realized", &err); if (err) { error_propagate(errp, err); diff --git a/hw/misc/iotkit-sysinfo.c b/hw/misc/iotkit-sysinfo.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/iotkit-sysinfo.c +++ b/hw/misc/iotkit-sysinfo.c @@ -XXX,XX +XXX,XX @@ static const int sysinfo_id[] = { static uint64_t iotkit_sysinfo_read(void *opaque, hwaddr offset, unsigned size) { + IoTKitSysInfo *s = IOTKIT_SYSINFO(opaque); uint64_t r; switch (offset) { case A_SYS_VERSION: - r = 0x41743; + r = s->sys_version; break; case A_SYS_CONFIG: - r = 0x31; + r = s->sys_config; break; case A_PID4 ... A_CID3: r = sysinfo_id[(offset - A_PID4) / 4]; @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps iotkit_sysinfo_ops = { .valid.max_access_size = 4, }; +static Property iotkit_sysinfo_props[] = { + DEFINE_PROP_UINT32("SYS_VERSION", IoTKitSysInfo, sys_version, 0), + DEFINE_PROP_UINT32("SYS_CONFIG", IoTKitSysInfo, sys_config, 0), + DEFINE_PROP_END_OF_LIST() +}; + static void iotkit_sysinfo_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void iotkit_sysinfo_init(Object *obj) static void iotkit_sysinfo_class_init(ObjectClass *klass, void *data) { + DeviceClass *dc = DEVICE_CLASS(klass); + /* * This device has no guest-modifiable state and so it * does not need a reset function or VMState. */ + + dc->props = iotkit_sysinfo_props; } static const TypeInfo iotkit_sysinfo_info = { -- 2.20.1 The SSE-200 has two Message Handling Units (MHUs), which sit behind the APB PPC0. Wire up some unimplemented-device stubs for these, since we don't yet implement a real model of this device. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-16-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 3 +++ hw/arm/armsse.c | 41 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 44 insertions(+) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ #include "hw/watchdog/cmsdk-apb-watchdog.h" #include "hw/misc/iotkit-sysctl.h" #include "hw/misc/iotkit-sysinfo.h" +#include "hw/misc/unimp.h" #include "hw/or-irq.h" #include "hw/core/split-irq.h" #include "hw/cpu/cluster.h" @@ -XXX,XX +XXX,XX @@ typedef struct ARMSSE { IoTKitSysCtl sysctl; IoTKitSysCtl sysinfo; + UnimplementedDeviceState mhu[2]; + /* * 'container' holds all devices seen by all CPUs. * 'cpu_container[i]' is the view that CPU i has: this has the diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ struct ARMSSEInfo { int num_cpus; uint32_t sys_version; SysConfigFormat sys_config_format; + bool has_mhus; }; static const ARMSSEInfo armsse_variants[] = { @@ -XXX,XX +XXX,XX @@ static const ARMSSEInfo armsse_variants[] = { .num_cpus = 1, .sys_version = 0x41743, .sys_config_format = IoTKitFormat, + .has_mhus = false, }, }; @@ -XXX,XX +XXX,XX @@ static void armsse_init(Object *obj) sizeof(s->sysctl), TYPE_IOTKIT_SYSCTL); sysbus_init_child_obj(obj, "armsse-sysinfo", &s->sysinfo, sizeof(s->sysinfo), TYPE_IOTKIT_SYSINFO); + if (info->has_mhus) { + sysbus_init_child_obj(obj, "mhu0", &s->mhu[0], sizeof(s->mhu[0]), + TYPE_UNIMPLEMENTED_DEVICE); + sysbus_init_child_obj(obj, "mhu1", &s->mhu[1], sizeof(s->mhu[1]), + TYPE_UNIMPLEMENTED_DEVICE); + } object_initialize_child(obj, "nmi-orgate", &s->nmi_orgate, sizeof(s->nmi_orgate), TYPE_OR_IRQ, &error_abort, NULL); @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) * 0x40000000: timer0 * 0x40001000: timer1 * 0x40002000: dual timer + * 0x40003000: MHU0 (SSE-200 only) + * 0x40004000: MHU1 (SSE-200 only) * We must configure and realize each downstream device and connect * it to the appropriate PPC port; then we can realize the PPC and * map its upstream ends to the right place in the container. @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) return; } + if (info->has_mhus) { + for (i = 0; i < ARRAY_SIZE(s->mhu); i++) { + char *name = g_strdup_printf("MHU%d", i); + char *port = g_strdup_printf("port[%d]", i + 3); + + qdev_prop_set_string(DEVICE(&s->mhu[i]), "name", name); + qdev_prop_set_uint64(DEVICE(&s->mhu[i]), "size", 0x1000); + object_property_set_bool(OBJECT(&s->mhu[i]), true, + "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->mhu[i]), 0); + object_property_set_link(OBJECT(&s->apb_ppc0), OBJECT(mr), + port, &err); + if (err) { + error_propagate(errp, err); + return; + } + g_free(name); + g_free(port); + } + } + object_property_set_bool(OBJECT(&s->apb_ppc0), true, "realized", &err); if (err) { error_propagate(errp, err); @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) memory_region_add_subregion(&s->container, 0x40001000, mr); mr = sysbus_mmio_get_region(sbd_apb_ppc0, 2); memory_region_add_subregion(&s->container, 0x40002000, mr); + if (info->has_mhus) { + mr = sysbus_mmio_get_region(sbd_apb_ppc0, 3); + memory_region_add_subregion(&s->container, 0x40003000, mr); + mr = sysbus_mmio_get_region(sbd_apb_ppc0, 4); + memory_region_add_subregion(&s->container, 0x40004000, mr); + } for (i = 0; i < IOTS_APB_PPC0_NUM_PORTS; i++) { qdev_connect_gpio_out_named(dev_secctl, "apb_ppc0_nonsec", i, qdev_get_gpio_in_named(dev_apb_ppc0, -- 2.20.1 Add unimplemented-device stubs for the various Power Policy Unit devices that the SSE-200 has. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-17-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 11 ++++++++ hw/arm/armsse.c | 58 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 69 insertions(+) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ #define SSE_MAX_CPUS 2 +/* These define what each PPU in the ppu[] index is for */ +#define CPU0CORE_PPU 0 +#define CPU1CORE_PPU 1 +#define DBG_PPU 2 +#define RAM0_PPU 3 +#define RAM1_PPU 4 +#define RAM2_PPU 5 +#define RAM3_PPU 6 +#define NUM_PPUS 7 + typedef struct ARMSSE { /*< private >*/ SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ typedef struct ARMSSE { IoTKitSysCtl sysinfo; UnimplementedDeviceState mhu[2]; + UnimplementedDeviceState ppu[NUM_PPUS]; /* * 'container' holds all devices seen by all CPUs. diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ struct ARMSSEInfo { uint32_t sys_version; SysConfigFormat sys_config_format; bool has_mhus; + bool has_ppus; }; static const ARMSSEInfo armsse_variants[] = { @@ -XXX,XX +XXX,XX @@ static const ARMSSEInfo armsse_variants[] = { .sys_version = 0x41743, .sys_config_format = IoTKitFormat, .has_mhus = false, + .has_ppus = false, }, }; @@ -XXX,XX +XXX,XX @@ static void armsse_init(Object *obj) sysbus_init_child_obj(obj, "mhu1", &s->mhu[1], sizeof(s->mhu[1]), TYPE_UNIMPLEMENTED_DEVICE); } + if (info->has_ppus) { + for (i = 0; i < info->num_cpus; i++) { + char *name = g_strdup_printf("CPU%dCORE_PPU", i); + int ppuidx = CPU0CORE_PPU + i; + + sysbus_init_child_obj(obj, name, &s->ppu[ppuidx], + sizeof(s->ppu[ppuidx]), + TYPE_UNIMPLEMENTED_DEVICE); + g_free(name); + } + sysbus_init_child_obj(obj, "DBG_PPU", &s->ppu[DBG_PPU], + sizeof(s->ppu[DBG_PPU]), + TYPE_UNIMPLEMENTED_DEVICE); + for (i = 0; i < info->sram_banks; i++) { + char *name = g_strdup_printf("RAM%d_PPU", i); + int ppuidx = RAM0_PPU + i; + + sysbus_init_child_obj(obj, name, &s->ppu[ppuidx], + sizeof(s->ppu[ppuidx]), + TYPE_UNIMPLEMENTED_DEVICE); + g_free(name); + } + } object_initialize_child(obj, "nmi-orgate", &s->nmi_orgate, sizeof(s->nmi_orgate), TYPE_OR_IRQ, &error_abort, NULL); @@ -XXX,XX +XXX,XX @@ static qemu_irq armsse_get_common_irq_in(ARMSSE *s, int irqno) } } +static void map_ppu(ARMSSE *s, int ppuidx, const char *name, hwaddr addr) +{ + /* Map a PPU unimplemented device stub */ + DeviceState *dev = DEVICE(&s->ppu[ppuidx]); + + qdev_prop_set_string(dev, "name", name); + qdev_prop_set_uint64(dev, "size", 0x1000); + qdev_init_nofail(dev); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->ppu[ppuidx]), 0, addr); +} + static void armsse_realize(DeviceState *dev, Error **errp) { ARMSSE *s = ARMSSE(dev); @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) } sysbus_mmio_map(SYS_BUS_DEVICE(&s->sysctl), 0, 0x50021000); + if (info->has_ppus) { + /* CPUnCORE_PPU for each CPU */ + for (i = 0; i < info->num_cpus; i++) { + char *name = g_strdup_printf("CPU%dCORE_PPU", i); + + map_ppu(s, CPU0CORE_PPU + i, name, 0x50023000 + i * 0x2000); + /* + * We don't support CPU debug so don't create the + * CPU0DEBUG_PPU at 0x50024000 and 0x50026000. + */ + g_free(name); + } + map_ppu(s, DBG_PPU, "DBG_PPU", 0x50029000); + + for (i = 0; i < info->sram_banks; i++) { + char *name = g_strdup_printf("RAM%d_PPU", i); + + map_ppu(s, RAM0_PPU + i, name, 0x5002a000 + i * 0x1000); + g_free(name); + } + } + /* This OR gate wires together outputs from the secure watchdogs to NMI */ object_property_set_int(OBJECT(&s->nmi_orgate), 2, "num-lines", &err); if (err) { -- 2.20.1 The SSE-200 gives each CPU a register bank to use to control its L1 instruction cache. Put in an unimplemented-device stub for this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-18-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 1 + hw/arm/armsse.c | 39 ++++++++++++++++++++++++++++++++++++++- 2 files changed, 39 insertions(+), 1 deletion(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ typedef struct ARMSSE { UnimplementedDeviceState mhu[2]; UnimplementedDeviceState ppu[NUM_PPUS]; + UnimplementedDeviceState cachectrl[SSE_MAX_CPUS]; /* * 'container' holds all devices seen by all CPUs. diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ struct ARMSSEInfo { SysConfigFormat sys_config_format; bool has_mhus; bool has_ppus; + bool has_cachectrl; }; static const ARMSSEInfo armsse_variants[] = { @@ -XXX,XX +XXX,XX @@ static const ARMSSEInfo armsse_variants[] = { .sys_config_format = IoTKitFormat, .has_mhus = false, .has_ppus = false, + .has_cachectrl = false, }, }; @@ -XXX,XX +XXX,XX @@ static void armsse_init(Object *obj) g_free(name); } } + if (info->has_cachectrl) { + for (i = 0; i < info->num_cpus; i++) { + char *name = g_strdup_printf("cachectrl%d", i); + + sysbus_init_child_obj(obj, name, &s->cachectrl[i], + sizeof(s->cachectrl[i]), + TYPE_UNIMPLEMENTED_DEVICE); + g_free(name); + } + } object_initialize_child(obj, "nmi-orgate", &s->nmi_orgate, sizeof(s->nmi_orgate), TYPE_OR_IRQ, &error_abort, NULL); @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) qdev_connect_gpio_out(DEVICE(&s->ppc_irq_orgate), 0, armsse_get_common_irq_in(s, 10)); - /* 0x40010000 .. 0x4001ffff: private CPU region: unused in IoTKit */ + /* + * 0x40010000 .. 0x4001ffff (and the 0x5001000... secure-only alias): + * private per-CPU region (all these devices are SSE-200 only): + * 0x50010000: L1 icache control registers + * 0x50011000: CPUSECCTRL (CPU local security control registers) + * 0x4001f000 and 0x5001f000: CPU_IDENTITY register block + */ + if (info->has_cachectrl) { + for (i = 0; i < info->num_cpus; i++) { + char *name = g_strdup_printf("cachectrl%d", i); + MemoryRegion *mr; + + qdev_prop_set_string(DEVICE(&s->cachectrl[i]), "name", name); + g_free(name); + qdev_prop_set_uint64(DEVICE(&s->cachectrl[i]), "size", 0x1000); + object_property_set_bool(OBJECT(&s->cachectrl[i]), true, + "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + + mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->cachectrl[i]), 0); + memory_region_add_subregion(&s->cpu_container[i], 0x50010000, mr); + } + } /* 0x40020000 .. 0x4002ffff : ARMSSE system control peripheral region */ /* Devices behind APB PPC1: -- 2.20.1 The SSE-200 has a "CPU local security control" register bank; add an unimplemented-device stub for it. (The register bank has only one interesting register, which allows the guest to lock down changes to various CPU registers so they cannot be modified further. We don't support that in our Cortex-M33 model anyway.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-19-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 1 + hw/arm/armsse.c | 31 +++++++++++++++++++++++++++++++ 2 files changed, 32 insertions(+) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ typedef struct ARMSSE { UnimplementedDeviceState mhu[2]; UnimplementedDeviceState ppu[NUM_PPUS]; UnimplementedDeviceState cachectrl[SSE_MAX_CPUS]; + UnimplementedDeviceState cpusecctrl[SSE_MAX_CPUS]; /* * 'container' holds all devices seen by all CPUs. diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ struct ARMSSEInfo { bool has_mhus; bool has_ppus; bool has_cachectrl; + bool has_cpusecctrl; }; static const ARMSSEInfo armsse_variants[] = { @@ -XXX,XX +XXX,XX @@ static const ARMSSEInfo armsse_variants[] = { .has_mhus = false, .has_ppus = false, .has_cachectrl = false, + .has_cpusecctrl = false, }, }; @@ -XXX,XX +XXX,XX @@ static void armsse_init(Object *obj) g_free(name); } } + if (info->has_cpusecctrl) { + for (i = 0; i < info->num_cpus; i++) { + char *name = g_strdup_printf("cpusecctrl%d", i); + + sysbus_init_child_obj(obj, name, &s->cpusecctrl[i], + sizeof(s->cpusecctrl[i]), + TYPE_UNIMPLEMENTED_DEVICE); + g_free(name); + } + } object_initialize_child(obj, "nmi-orgate", &s->nmi_orgate, sizeof(s->nmi_orgate), TYPE_OR_IRQ, &error_abort, NULL); @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) memory_region_add_subregion(&s->cpu_container[i], 0x50010000, mr); } } + if (info->has_cpusecctrl) { + for (i = 0; i < info->num_cpus; i++) { + char *name = g_strdup_printf("CPUSECCTRL%d", i); + MemoryRegion *mr; + + qdev_prop_set_string(DEVICE(&s->cpusecctrl[i]), "name", name); + g_free(name); + qdev_prop_set_uint64(DEVICE(&s->cpusecctrl[i]), "size", 0x1000); + object_property_set_bool(OBJECT(&s->cpusecctrl[i]), true, + "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + + mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->cpusecctrl[i]), 0); + memory_region_add_subregion(&s->cpu_container[i], 0x50011000, mr); + } + } /* 0x40020000 .. 0x4002ffff : ARMSSE system control peripheral region */ /* Devices behind APB PPC1: -- 2.20.1 The SSE-200 has a CPU_IDENTITY register block, which is a set of read-only registers. As well as the usual PID/CID registers, there is a single CPUID register which indicates whether the CPU is CPU 0 or CPU 1. Implement a model of this register block. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-20-peter.maydell@linaro.org --- hw/misc/Makefile.objs | 1 + include/hw/misc/armsse-cpuid.h | 41 ++++++++++ hw/misc/armsse-cpuid.c | 134 ++++++++++++++++++++++++++++++++ MAINTAINERS | 2 + default-configs/arm-softmmu.mak | 1 + hw/misc/trace-events | 4 + 6 files changed, 183 insertions(+) create mode 100644 include/hw/misc/armsse-cpuid.h create mode 100644 hw/misc/armsse-cpuid.c diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_TZ_PPC) += tz-ppc.o obj-$(CONFIG_IOTKIT_SECCTL) += iotkit-secctl.o obj-$(CONFIG_IOTKIT_SYSCTL) += iotkit-sysctl.o obj-$(CONFIG_IOTKIT_SYSINFO) += iotkit-sysinfo.o +obj-$(CONFIG_ARMSSE_CPUID) += armsse-cpuid.o obj-$(CONFIG_PVPANIC) += pvpanic.o obj-$(CONFIG_AUX) += auxbus.o diff --git a/include/hw/misc/armsse-cpuid.h b/include/hw/misc/armsse-cpuid.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/armsse-cpuid.h @@ -XXX,XX +XXX,XX @@ +/* + * ARM SSE-200 CPU_IDENTITY register block + * + * Copyright (c) 2019 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +/* + * This is a model of the "CPU_IDENTITY" register block which is part of the + * Arm SSE-200 and documented in + * http://infocenter.arm.com/help/topic/com.arm.doc.101104_0100_00_en/corelink_sse200_subsystem_for_embedded_technical_reference_manual_101104_0100_00_en.pdf + * + * QEMU interface: + * + QOM property "CPUID": the value to use for the CPUID register + * + sysbus MMIO region 0: the system information register bank + */ + +#ifndef HW_MISC_ARMSSE_CPUID_H +#define HW_MISC_ARMSSE_CPUID_H + +#include "hw/sysbus.h" + +#define TYPE_ARMSSE_CPUID "armsse-cpuid" +#define ARMSSE_CPUID(obj) OBJECT_CHECK(ARMSSECPUID, (obj), TYPE_ARMSSE_CPUID) + +typedef struct ARMSSECPUID { + /*< private >*/ + SysBusDevice parent_obj; + + /*< public >*/ + MemoryRegion iomem; + + /* Properties */ + uint32_t cpuid; +} ARMSSECPUID; + +#endif diff --git a/hw/misc/armsse-cpuid.c b/hw/misc/armsse-cpuid.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/armsse-cpuid.c @@ -XXX,XX +XXX,XX @@ +/* + * ARM SSE-200 CPU_IDENTITY register block + * + * Copyright (c) 2019 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +/* + * This is a model of the "CPU_IDENTITY" register block which is part of the + * Arm SSE-200 and documented in + * http://infocenter.arm.com/help/topic/com.arm.doc.101104_0100_00_en/corelink_sse200_subsystem_for_embedded_technical_reference_manual_101104_0100_00_en.pdf + * + * It consists of one read-only CPUID register (set by QOM property), plus the + * usual ID registers. + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "trace.h" +#include "qapi/error.h" +#include "sysemu/sysemu.h" +#include "hw/sysbus.h" +#include "hw/registerfields.h" +#include "hw/misc/armsse-cpuid.h" + +REG32(CPUID, 0x0) +REG32(PID4, 0xfd0) +REG32(PID5, 0xfd4) +REG32(PID6, 0xfd8) +REG32(PID7, 0xfdc) +REG32(PID0, 0xfe0) +REG32(PID1, 0xfe4) +REG32(PID2, 0xfe8) +REG32(PID3, 0xfec) +REG32(CID0, 0xff0) +REG32(CID1, 0xff4) +REG32(CID2, 0xff8) +REG32(CID3, 0xffc) + +/* PID/CID values */ +static const int sysinfo_id[] = { + 0x04, 0x00, 0x00, 0x00, /* PID4..PID7 */ + 0x58, 0xb8, 0x0b, 0x00, /* PID0..PID3 */ + 0x0d, 0xf0, 0x05, 0xb1, /* CID0..CID3 */ +}; + +static uint64_t armsse_cpuid_read(void *opaque, hwaddr offset, + unsigned size) +{ + ARMSSECPUID *s = ARMSSE_CPUID(opaque); + uint64_t r; + + switch (offset) { + case A_CPUID: + r = s->cpuid; + break; + case A_PID4 ... A_CID3: + r = sysinfo_id[(offset - A_PID4) / 4]; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "SSE CPU_IDENTITY read: bad offset 0x%x\n", (int)offset); + r = 0; + break; + } + trace_armsse_cpuid_read(offset, r, size); + return r; +} + +static void armsse_cpuid_write(void *opaque, hwaddr offset, + uint64_t value, unsigned size) +{ + trace_armsse_cpuid_write(offset, value, size); + + qemu_log_mask(LOG_GUEST_ERROR, + "SSE CPU_IDENTITY: write to RO offset 0x%x\n", (int)offset); +} + +static const MemoryRegionOps armsse_cpuid_ops = { + .read = armsse_cpuid_read, + .write = armsse_cpuid_write, + .endianness = DEVICE_LITTLE_ENDIAN, + /* byte/halfword accesses are just zero-padded on reads and writes */ + .impl.min_access_size = 4, + .impl.max_access_size = 4, + .valid.min_access_size = 1, + .valid.max_access_size = 4, +}; + +static Property armsse_cpuid_props[] = { + DEFINE_PROP_UINT32("CPUID", ARMSSECPUID, cpuid, 0), + DEFINE_PROP_END_OF_LIST() +}; + +static void armsse_cpuid_init(Object *obj) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + ARMSSECPUID *s = ARMSSE_CPUID(obj); + + memory_region_init_io(&s->iomem, obj, &armsse_cpuid_ops, + s, "armsse-cpuid", 0x1000); + sysbus_init_mmio(sbd, &s->iomem); +} + +static void armsse_cpuid_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + /* + * This device has no guest-modifiable state and so it + * does not need a reset function or VMState. + */ + + dc->props = armsse_cpuid_props; +} + +static const TypeInfo armsse_cpuid_info = { + .name = TYPE_ARMSSE_CPUID, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(ARMSSECPUID), + .instance_init = armsse_cpuid_init, + .class_init = armsse_cpuid_class_init, +}; + +static void armsse_cpuid_register_types(void) +{ + type_register_static(&armsse_cpuid_info); +} + +type_init(armsse_cpuid_register_types); diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/misc/iotkit-sysctl.c F: include/hw/misc/iotkit-sysctl.h F: hw/misc/iotkit-sysinfo.c F: include/hw/misc/iotkit-sysinfo.h +F: hw/misc/armsse-cpuid.c +F: include/hw/misc/armsse-cpuid.h Musicpal M: Jan Kiszka <jan.kiszka@web.de> diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak index XXXXXXX..XXXXXXX 100644 --- a/default-configs/arm-softmmu.mak +++ b/default-configs/arm-softmmu.mak @@ -XXX,XX +XXX,XX @@ CONFIG_ARMSSE=y CONFIG_IOTKIT_SECCTL=y CONFIG_IOTKIT_SYSCTL=y CONFIG_IOTKIT_SYSINFO=y +CONFIG_ARMSSE_CPUID=y CONFIG_VERSATILE=y CONFIG_VERSATILE_PCI=y diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ iotkit_sysinfo_write(uint64_t offset, uint64_t data, unsigned size) "IoTKit SysI iotkit_sysctl_read(uint64_t offset, uint64_t data, unsigned size) "IoTKit SysCtl read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" iotkit_sysctl_write(uint64_t offset, uint64_t data, unsigned size) "IoTKit SysCtl write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" iotkit_sysctl_reset(void) "IoTKit SysCtl: reset" + +# hw/misc/armsse-cpuid.c +armsse_cpuid_read(uint64_t offset, uint64_t data, unsigned size) "SSE-200 CPU_IDENTITY read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" +armsse_cpuid_write(uint64_t offset, uint64_t data, unsigned size) "SSE-200 CPU_IDENTITY write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" -- 2.20.1 Instantiate a copy of the CPU_IDENTITY register block for each CPU in an SSE-200. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-21-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 3 +++ hw/arm/armsse.c | 28 ++++++++++++++++++++++++++++ 2 files changed, 31 insertions(+) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ #include "hw/watchdog/cmsdk-apb-watchdog.h" #include "hw/misc/iotkit-sysctl.h" #include "hw/misc/iotkit-sysinfo.h" +#include "hw/misc/armsse-cpuid.h" #include "hw/misc/unimp.h" #include "hw/or-irq.h" #include "hw/core/split-irq.h" @@ -XXX,XX +XXX,XX @@ typedef struct ARMSSE { UnimplementedDeviceState cachectrl[SSE_MAX_CPUS]; UnimplementedDeviceState cpusecctrl[SSE_MAX_CPUS]; + ARMSSECPUID cpuid[SSE_MAX_CPUS]; + /* * 'container' holds all devices seen by all CPUs. * 'cpu_container[i]' is the view that CPU i has: this has the diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ struct ARMSSEInfo { bool has_ppus; bool has_cachectrl; bool has_cpusecctrl; + bool has_cpuid; }; static const ARMSSEInfo armsse_variants[] = { @@ -XXX,XX +XXX,XX @@ static const ARMSSEInfo armsse_variants[] = { .has_ppus = false, .has_cachectrl = false, .has_cpusecctrl = false, + .has_cpuid = false, }, }; @@ -XXX,XX +XXX,XX @@ static void armsse_init(Object *obj) g_free(name); } } + if (info->has_cpuid) { + for (i = 0; i < info->num_cpus; i++) { + char *name = g_strdup_printf("cpuid%d", i); + + sysbus_init_child_obj(obj, name, &s->cpuid[i], + sizeof(s->cpuid[i]), + TYPE_ARMSSE_CPUID); + g_free(name); + } + } object_initialize_child(obj, "nmi-orgate", &s->nmi_orgate, sizeof(s->nmi_orgate), TYPE_OR_IRQ, &error_abort, NULL); @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) memory_region_add_subregion(&s->cpu_container[i], 0x50011000, mr); } } + if (info->has_cpuid) { + for (i = 0; i < info->num_cpus; i++) { + MemoryRegion *mr; + + qdev_prop_set_uint32(DEVICE(&s->cpuid[i]), "CPUID", i); + object_property_set_bool(OBJECT(&s->cpuid[i]), true, + "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + + mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->cpuid[i]), 0); + memory_region_add_subregion(&s->cpu_container[i], 0x4001F000, mr); + } + } /* 0x40020000 .. 0x4002ffff : ARMSSE system control peripheral region */ /* Devices behind APB PPC1: -- 2.20.1 Add a model of the SSE-200, now we have put in all the code that lets us make it different from the IoTKit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-22-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 19 ++++++++++++++++--- hw/arm/armsse.c | 12 ++++++++++++ 2 files changed, 28 insertions(+), 3 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ /* - * ARM SSE (Subsystems for Embedded): IoTKit + * ARM SSE (Subsystems for Embedded): IoTKit, SSE-200 * * Copyright (c) 2018 Linaro Limited * Written by Peter Maydell @@ -XXX,XX +XXX,XX @@ /* * This is a model of the Arm "Subsystems for Embedded" family of * hardware, which include the IoT Kit and the SSE-050, SSE-100 and - * SSE-200. Currently we model only the Arm IoT Kit which is documented in + * SSE-200. Currently we model: + * - the Arm IoT Kit which is documented in * http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ecm0601256/index.html - * It contains: + * - the SSE-200 which is documented in + * http://infocenter.arm.com/help/topic/com.arm.doc.101104_0100_00_en/corelink_sse200_subsystem_for_embedded_technical_reference_manual_101104_0100_00_en.pdf + * + * The IoTKit contains: * a Cortex-M33 * the IDAU * some timers and watchdogs @@ -XXX,XX +XXX,XX @@ * a security controller * a bus fabric which arranges that some parts of the address * space are secure and non-secure aliases of each other + * The SSE-200 additionally contains: + * a second Cortex-M33 + * two Message Handling Units (MHUs) + * an optional CryptoCell (which we do not model) + * more SRAM banks with associated MPCs + * multiple Power Policy Units (PPUs) + * a control interface for an icache for each CPU + * per-CPU identity and control register blocks * * QEMU interface: * + QOM property "memory" is a MemoryRegion containing the devices provided @@ -XXX,XX +XXX,XX @@ * them via the ARMSSE base class, so they have no IOTKIT() etc macros. */ #define TYPE_IOTKIT "iotkit" +#define TYPE_SSE200 "sse-200" /* We have an IRQ splitter and an OR gate input for each external PPC * and the 2 internal PPCs diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static const ARMSSEInfo armsse_variants[] = { .has_cpusecctrl = false, .has_cpuid = false, }, + { + .name = TYPE_SSE200, + .sram_banks = 4, + .num_cpus = 2, + .sys_version = 0x22041743, + .sys_config_format = SSE200Format, + .has_mhus = true, + .has_ppus = true, + .has_cachectrl = true, + .has_cpusecctrl = true, + .has_cpuid = true, + }, }; static uint32_t armsse_sys_config_value(ARMSSE *s, const ARMSSEInfo *info) -- 2.20.1 In preparation for adding support for the AN521 MPS2 image, we need to handle wiring up the MPS2 device interrupt lines to both CPUs in the SSE-200, rather than just the one that the IoTKit has. Abstract out a "connect to the IoTKit interrupt line" function and make it connect to a splitter which feeds both sets of inputs for the SSE-200 case. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-23-peter.maydell@linaro.org --- hw/arm/mps2-tz.c | 79 ++++++++++++++++++++++++++++++++++++------------ 1 file changed, 59 insertions(+), 20 deletions(-) diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ #include "net/net.h" #include "hw/core/split-irq.h" +#define MPS2TZ_NUMIRQ 92 + typedef enum MPS2TZFPGAType { FPGA_AN505, + FPGA_AN521, } MPS2TZFPGAType; typedef struct { @@ -XXX,XX +XXX,XX @@ typedef struct { SplitIRQ sec_resp_splitter; qemu_or_irq uart_irq_orgate; DeviceState *lan9118; + SplitIRQ cpu_irq_splitter[MPS2TZ_NUMIRQ]; } MPS2TZMachineState; #define TYPE_MPS2TZ_MACHINE "mps2tz" @@ -XXX,XX +XXX,XX @@ static void make_ram_alias(MemoryRegion *mr, const char *name, memory_region_add_subregion(get_system_memory(), base, mr); } +static qemu_irq get_sse_irq_in(MPS2TZMachineState *mms, int irqno) +{ + /* Return a qemu_irq which will signal IRQ n to all CPUs in the SSE. */ + MPS2TZMachineClass *mmc = MPS2TZ_MACHINE_GET_CLASS(mms); + + assert(irqno < MPS2TZ_NUMIRQ); + + switch (mmc->fpga_type) { + case FPGA_AN505: + return qdev_get_gpio_in_named(DEVICE(&mms->iotkit), "EXP_IRQ", irqno); + case FPGA_AN521: + return qdev_get_gpio_in(DEVICE(&mms->cpu_irq_splitter[irqno]), 0); + default: + g_assert_not_reached(); + } +} + /* Most of the devices in the AN505 FPGA image sit behind * Peripheral Protection Controllers. These data structures * define the layout of which devices sit behind which PPCs. @@ -XXX,XX +XXX,XX @@ static MemoryRegion *make_uart(MPS2TZMachineState *mms, void *opaque, int txirqno = i * 2 + 1; int combirqno = i + 10; SysBusDevice *s; - DeviceState *iotkitdev = DEVICE(&mms->iotkit); DeviceState *orgate_dev = DEVICE(&mms->uart_irq_orgate); sysbus_init_child_obj(OBJECT(mms), name, uart, sizeof(mms->uart[0]), @@ -XXX,XX +XXX,XX @@ static MemoryRegion *make_uart(MPS2TZMachineState *mms, void *opaque, qdev_prop_set_uint32(DEVICE(uart), "pclk-frq", SYSCLK_FRQ); object_property_set_bool(OBJECT(uart), true, "realized", &error_fatal); s = SYS_BUS_DEVICE(uart); - sysbus_connect_irq(s, 0, qdev_get_gpio_in_named(iotkitdev, - "EXP_IRQ", txirqno)); - sysbus_connect_irq(s, 1, qdev_get_gpio_in_named(iotkitdev, - "EXP_IRQ", rxirqno)); + sysbus_connect_irq(s, 0, get_sse_irq_in(mms, txirqno)); + sysbus_connect_irq(s, 1, get_sse_irq_in(mms, rxirqno)); sysbus_connect_irq(s, 2, qdev_get_gpio_in(orgate_dev, i * 2)); sysbus_connect_irq(s, 3, qdev_get_gpio_in(orgate_dev, i * 2 + 1)); - sysbus_connect_irq(s, 4, qdev_get_gpio_in_named(iotkitdev, - "EXP_IRQ", combirqno)); + sysbus_connect_irq(s, 4, get_sse_irq_in(mms, combirqno)); return sysbus_mmio_get_region(SYS_BUS_DEVICE(uart), 0); } @@ -XXX,XX +XXX,XX @@ static MemoryRegion *make_eth_dev(MPS2TZMachineState *mms, void *opaque, const char *name, hwaddr size) { SysBusDevice *s; - DeviceState *iotkitdev = DEVICE(&mms->iotkit); NICInfo *nd = &nd_table[0]; /* In hardware this is a LAN9220; the LAN9118 is software compatible @@ -XXX,XX +XXX,XX @@ static MemoryRegion *make_eth_dev(MPS2TZMachineState *mms, void *opaque, qdev_init_nofail(mms->lan9118); s = SYS_BUS_DEVICE(mms->lan9118); - sysbus_connect_irq(s, 0, qdev_get_gpio_in_named(iotkitdev, "EXP_IRQ", 16)); + sysbus_connect_irq(s, 0, get_sse_irq_in(mms, 16)); return sysbus_mmio_get_region(s, 0); } @@ -XXX,XX +XXX,XX @@ static MemoryRegion *make_dma(MPS2TZMachineState *mms, void *opaque, s = SYS_BUS_DEVICE(dma); /* Wire up DMACINTR, DMACINTERR, DMACINTTC */ - sysbus_connect_irq(s, 0, qdev_get_gpio_in_named(iotkitdev, - "EXP_IRQ", 58 + i * 3)); - sysbus_connect_irq(s, 1, qdev_get_gpio_in_named(iotkitdev, - "EXP_IRQ", 56 + i * 3)); - sysbus_connect_irq(s, 2, qdev_get_gpio_in_named(iotkitdev, - "EXP_IRQ", 57 + i * 3)); + sysbus_connect_irq(s, 0, get_sse_irq_in(mms, 58 + i * 3)); + sysbus_connect_irq(s, 1, get_sse_irq_in(mms, 56 + i * 3)); + sysbus_connect_irq(s, 2, get_sse_irq_in(mms, 57 + i * 3)); g_free(mscname); return sysbus_mmio_get_region(s, 0); @@ -XXX,XX +XXX,XX @@ static MemoryRegion *make_spi(MPS2TZMachineState *mms, void *opaque, */ PL022State *spi = opaque; int i = spi - &mms->spi[0]; - DeviceState *iotkitdev = DEVICE(&mms->iotkit); SysBusDevice *s; sysbus_init_child_obj(OBJECT(mms), name, spi, sizeof(mms->spi[0]), TYPE_PL022); object_property_set_bool(OBJECT(spi), true, "realized", &error_fatal); s = SYS_BUS_DEVICE(spi); - sysbus_connect_irq(s, 0, - qdev_get_gpio_in_named(iotkitdev, "EXP_IRQ", 51 + i)); + sysbus_connect_irq(s, 0, get_sse_irq_in(mms, 51 + i)); return sysbus_mmio_get_region(s, 0); } static void mps2tz_common_init(MachineState *machine) { MPS2TZMachineState *mms = MPS2TZ_MACHINE(machine); + MPS2TZMachineClass *mmc = MPS2TZ_MACHINE_GET_CLASS(mms); MachineClass *mc = MACHINE_GET_CLASS(machine); MemoryRegion *system_memory = get_system_memory(); DeviceState *iotkitdev; @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) iotkitdev = DEVICE(&mms->iotkit); object_property_set_link(OBJECT(&mms->iotkit), OBJECT(system_memory), "memory", &error_abort); - qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", 92); + qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", MPS2TZ_NUMIRQ); qdev_prop_set_uint32(iotkitdev, "MAINCLK", SYSCLK_FRQ); object_property_set_bool(OBJECT(&mms->iotkit), true, "realized", &error_fatal); + /* + * The AN521 needs us to create splitters to feed the IRQ inputs + * for each CPU in the SSE-200 from each device in the board. + */ + if (mmc->fpga_type == FPGA_AN521) { + for (i = 0; i < MPS2TZ_NUMIRQ; i++) { + char *name = g_strdup_printf("mps2-irq-splitter%d", i); + SplitIRQ *splitter = &mms->cpu_irq_splitter[i]; + + object_initialize_child(OBJECT(machine), name, + splitter, sizeof(*splitter), + TYPE_SPLIT_IRQ, &error_fatal, NULL); + g_free(name); + + object_property_set_int(OBJECT(splitter), 2, "num-lines", + &error_fatal); + object_property_set_bool(OBJECT(splitter), true, "realized", + &error_fatal); + qdev_connect_gpio_out(DEVICE(splitter), 0, + qdev_get_gpio_in_named(DEVICE(&mms->iotkit), + "EXP_IRQ", i)); + qdev_connect_gpio_out(DEVICE(splitter), 1, + qdev_get_gpio_in_named(DEVICE(&mms->iotkit), + "EXP_CPU1_IRQ", i)); + } + } + /* The sec_resp_cfg output from the IoTKit must be split into multiple * lines, one for each of the PPCs we create here, plus one per MSC. */ @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) object_property_set_bool(OBJECT(&mms->uart_irq_orgate), true, "realized", &error_fatal); qdev_connect_gpio_out(DEVICE(&mms->uart_irq_orgate), 0, - qdev_get_gpio_in_named(iotkitdev, "EXP_IRQ", 15)); + get_sse_irq_in(mms, 15)); /* Most of the devices in the FPGA are behind Peripheral Protection * Controllers. The required order for initializing things is: -- 2.20.1 Add a model of the MPS2 FPGA image described in Application Note AN521. This is identical to the AN505 image, except that it uses the SSE-200 rather than the IoTKit and so has two Cortex-M33 CPUs. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-24-peter.maydell@linaro.org --- hw/arm/mps2-tz.c | 38 ++++++++++++++++++++++++++++++++++++-- 1 file changed, 36 insertions(+), 2 deletions(-) diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ * as seen by the guest depend significantly on the FPGA image. * This source file covers the following FPGA images, for TrustZone cores: * "mps2-an505" -- Cortex-M33 as documented in ARM Application Note AN505 + * "mps2-an521" -- Dual Cortex-M33 as documented in Application Note AN521 * * Links to the TRM for the board itself and to the various Application * Notes which document the FPGA images can be found here: @@ -XXX,XX +XXX,XX @@ * http://infocenter.arm.com/help/topic/com.arm.doc.100112_0200_06_en/versatile_express_cortex_m_prototyping_systems_v2m_mps2_and_v2m_mps2plus_technical_reference_100112_0200_06_en.pdf * Application Note AN505: * http://infocenter.arm.com/help/topic/com.arm.doc.dai0505b/index.html + * Application Note AN521: + * http://infocenter.arm.com/help/topic/com.arm.doc.dai0521c/index.html * * The AN505 defers to the Cortex-M33 processor ARMv8M IoT Kit FVP User Guide * (ARM ECM0601256) for the details of some of the device layout: * http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ecm0601256/index.html + * Similarly, the AN521 uses the SSE-200, and the SSE-200 TRM defines + * most of the device layout: + * http://infocenter.arm.com/help/topic/com.arm.doc.101104_0100_00_en/corelink_sse200_subsystem_for_embedded_technical_reference_manual_101104_0100_00_en.pdf + * */ #include "qemu/osdep.h" @@ -XXX,XX +XXX,XX @@ typedef struct { MachineClass parent; MPS2TZFPGAType fpga_type; uint32_t scc_id; + const char *armsse_type; } MPS2TZMachineClass; typedef struct { @@ -XXX,XX +XXX,XX @@ typedef struct { #define TYPE_MPS2TZ_MACHINE "mps2tz" #define TYPE_MPS2TZ_AN505_MACHINE MACHINE_TYPE_NAME("mps2-an505") +#define TYPE_MPS2TZ_AN521_MACHINE MACHINE_TYPE_NAME("mps2-an521") #define MPS2TZ_MACHINE(obj) \ OBJECT_CHECK(MPS2TZMachineState, obj, TYPE_MPS2TZ_MACHINE) @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) } sysbus_init_child_obj(OBJECT(machine), "iotkit", &mms->iotkit, - sizeof(mms->iotkit), TYPE_IOTKIT); + sizeof(mms->iotkit), mmc->armsse_type); iotkitdev = DEVICE(&mms->iotkit); object_property_set_link(OBJECT(&mms->iotkit), OBJECT(system_memory), "memory", &error_abort); @@ -XXX,XX +XXX,XX @@ static void mps2tz_class_init(ObjectClass *oc, void *data) IDAUInterfaceClass *iic = IDAU_INTERFACE_CLASS(oc); mc->init = mps2tz_common_init; - mc->max_cpus = 1; iic->check = mps2_tz_idau_check; } @@ -XXX,XX +XXX,XX @@ static void mps2tz_an505_class_init(ObjectClass *oc, void *data) MPS2TZMachineClass *mmc = MPS2TZ_MACHINE_CLASS(oc); mc->desc = "ARM MPS2 with AN505 FPGA image for Cortex-M33"; + mc->default_cpus = 1; + mc->min_cpus = mc->default_cpus; + mc->max_cpus = mc->default_cpus; mmc->fpga_type = FPGA_AN505; mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-m33"); mmc->scc_id = 0x41045050; + mmc->armsse_type = TYPE_IOTKIT; +} + +static void mps2tz_an521_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + MPS2TZMachineClass *mmc = MPS2TZ_MACHINE_CLASS(oc); + + mc->desc = "ARM MPS2 with AN521 FPGA image for dual Cortex-M33"; + mc->default_cpus = 2; + mc->min_cpus = mc->default_cpus; + mc->max_cpus = mc->default_cpus; + mmc->fpga_type = FPGA_AN521; + mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-m33"); + mmc->scc_id = 0x41045210; + mmc->armsse_type = TYPE_SSE200; } static const TypeInfo mps2tz_info = { @@ -XXX,XX +XXX,XX @@ static const TypeInfo mps2tz_an505_info = { .class_init = mps2tz_an505_class_init, }; +static const TypeInfo mps2tz_an521_info = { + .name = TYPE_MPS2TZ_AN521_MACHINE, + .parent = TYPE_MPS2TZ_MACHINE, + .class_init = mps2tz_an521_class_init, +}; + static void mps2tz_machine_init(void) { type_register_static(&mps2tz_info); type_register_static(&mps2tz_an505_info); + type_register_static(&mps2tz_an521_info); } type_init(mps2tz_machine_init); -- 2.20.1 The "system instructions" and "system register move" subcategories of "branches, exception generating and system instructions" for A64 only apply if bits [23:22] are zero; other values are currently unallocated. Correctly UNDEF these unallocated encodings. Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20190125182626.9221-2-peter.maydell@linaro.org --- target/arm/translate-a64.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_b_exc_sys(DisasContext *s, uint32_t insn) break; case 0x6a: /* Exception generation / System */ if (insn & (1 << 24)) { - disas_system(s, insn); + if (extract32(insn, 22, 2) == 0) { + disas_system(s, insn); + } else { + unallocated_encoding(s); + } } else { disas_exc(s, insn); } -- 2.20.1 The PRFM prefetch insn in the load/store with imm9 encodings requires idx field 0b00; we were underdecoding this by only checking !is_unpriv (which is equivalent to idx != 2). Correctly UNDEF the unallocated encodings where idx == 0b01 and 0b11 as well as 0b10. Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20190125182626.9221-3-peter.maydell@linaro.org --- target/arm/translate-a64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_ldst_reg_imm9(DisasContext *s, uint32_t insn, } else { if (size == 3 && opc == 2) { /* PRFM - prefetch */ - if (is_unpriv) { + if (idx != 0) { unallocated_encoding(s); return; } -- 2.20.1 In the AdvSIMD load/store multiple structures encodings, the non-post-indexed case should have zeroes in [20:16] (which is the Rm field for the post-indexed case). Correctly UNDEF the currently unallocated encodings which have non-zeroes in those bits. Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20190125182626.9221-4-peter.maydell@linaro.org --- target/arm/translate-a64.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_ldst_multiple_struct(DisasContext *s, uint32_t insn) { int rt = extract32(insn, 0, 5); int rn = extract32(insn, 5, 5); + int rm = extract32(insn, 16, 5); int size = extract32(insn, 10, 2); int opcode = extract32(insn, 12, 4); bool is_store = !extract32(insn, 22, 1); @@ -XXX,XX +XXX,XX @@ static void disas_ldst_multiple_struct(DisasContext *s, uint32_t insn) return; } + if (!is_postidx && rm != 0) { + unallocated_encoding(s); + return; + } + /* From the shared decode logic */ switch (opcode) { case 0x0: @@ -XXX,XX +XXX,XX @@ static void disas_ldst_multiple_struct(DisasContext *s, uint32_t insn) } if (is_postidx) { - int rm = extract32(insn, 16, 5); if (rm == 31) { tcg_gen_mov_i64(tcg_rn, tcg_addr); } else { -- 2.20.1 In the AdvSIMD load/store single structure encodings, the non-post-indexed case should have zeroes in [20:16] (which is the Rm field for the post-indexed case). Bit 31 must also be zero (a check we got right in ldst_multiple but not here). Correctly UNDEF these unallocated encodings. Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20190125182626.9221-5-peter.maydell@linaro.org --- target/arm/translate-a64.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_ldst_single_struct(DisasContext *s, uint32_t insn) { int rt = extract32(insn, 0, 5); int rn = extract32(insn, 5, 5); + int rm = extract32(insn, 16, 5); int size = extract32(insn, 10, 2); int S = extract32(insn, 12, 1); int opc = extract32(insn, 13, 3); @@ -XXX,XX +XXX,XX @@ static void disas_ldst_single_struct(DisasContext *s, uint32_t insn) int ebytes, xs; TCGv_i64 tcg_addr, tcg_rn, tcg_ebytes; + if (extract32(insn, 31, 1)) { + unallocated_encoding(s); + return; + } + if (!is_postidx && rm != 0) { + unallocated_encoding(s); + return; + } + switch (scale) { case 3: if (!is_load || S) { @@ -XXX,XX +XXX,XX @@ static void disas_ldst_single_struct(DisasContext *s, uint32_t insn) } if (is_postidx) { - int rm = extract32(insn, 16, 5); if (rm == 31) { tcg_gen_mov_i64(tcg_rn, tcg_addr); } else { -- 2.20.1 In the "add/subtract (extended register)" encoding group, the "opt" field in bits [23:22] must be zero. Correctly UNDEF the unallocated encodings where this field is not zero. Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20190125182626.9221-6-peter.maydell@linaro.org --- target/arm/translate-a64.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_add_sub_ext_reg(DisasContext *s, uint32_t insn) int imm3 = extract32(insn, 10, 3); int option = extract32(insn, 13, 3); int rm = extract32(insn, 16, 5); + int opt = extract32(insn, 22, 2); bool setflags = extract32(insn, 29, 1); bool sub_op = extract32(insn, 30, 1); bool sf = extract32(insn, 31, 1); @@ -XXX,XX +XXX,XX @@ static void disas_add_sub_ext_reg(DisasContext *s, uint32_t insn) TCGv_i64 tcg_rd; TCGv_i64 tcg_result; - if (imm3 > 4) { + if (imm3 > 4 || opt != 0) { unallocated_encoding(s); return; } -- 2.20.1 In the encoding groups * floating-point data-processing (1 source) * floating-point data-processing (2 source) * floating-point data-processing (3 source) * floating-point immediate * floating-point compare * floating-ponit conditional compare * floating-point conditional select bit 31 is M and bit 29 is S (and bit 30 is 0, already checked at this point in the decode). None of these groups allocate any encoding for M=1 or S=1. We checked this in disas_fp_compare(), disas_fp_ccomp() and disas_fp_csel(), but missed it in disas_fp_1src(), disas_fp_2src(), disas_fp_3src() and disas_fp_imm(). We also missed that in the fp immediate encoding the imm5 field must be all zeroes. Correctly UNDEF the unallocated encodings here. Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20190125182626.9221-7-peter.maydell@linaro.org --- target/arm/translate-a64.c | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void handle_fp_fcvt(DisasContext *s, int opcode, */ static void disas_fp_1src(DisasContext *s, uint32_t insn) { + int mos = extract32(insn, 29, 3); int type = extract32(insn, 22, 2); int opcode = extract32(insn, 15, 6); int rn = extract32(insn, 5, 5); int rd = extract32(insn, 0, 5); + if (mos) { + unallocated_encoding(s); + return; + } + switch (opcode) { case 0x4: case 0x5: case 0x7: { @@ -XXX,XX +XXX,XX @@ static void handle_fp_2src_half(DisasContext *s, int opcode, */ static void disas_fp_2src(DisasContext *s, uint32_t insn) { + int mos = extract32(insn, 29, 3); int type = extract32(insn, 22, 2); int rd = extract32(insn, 0, 5); int rn = extract32(insn, 5, 5); int rm = extract32(insn, 16, 5); int opcode = extract32(insn, 12, 4); - if (opcode > 8) { + if (opcode > 8 || mos) { unallocated_encoding(s); return; } @@ -XXX,XX +XXX,XX @@ static void handle_fp_3src_half(DisasContext *s, bool o0, bool o1, */ static void disas_fp_3src(DisasContext *s, uint32_t insn) { + int mos = extract32(insn, 29, 3); int type = extract32(insn, 22, 2); int rd = extract32(insn, 0, 5); int rn = extract32(insn, 5, 5); @@ -XXX,XX +XXX,XX @@ static void disas_fp_3src(DisasContext *s, uint32_t insn) bool o0 = extract32(insn, 15, 1); bool o1 = extract32(insn, 21, 1); + if (mos) { + unallocated_encoding(s); + return; + } + switch (type) { case 0: if (!fp_access_check(s)) { @@ -XXX,XX +XXX,XX @@ uint64_t vfp_expand_imm(int size, uint8_t imm8) static void disas_fp_imm(DisasContext *s, uint32_t insn) { int rd = extract32(insn, 0, 5); + int imm5 = extract32(insn, 5, 5); int imm8 = extract32(insn, 13, 8); int type = extract32(insn, 22, 2); + int mos = extract32(insn, 29, 3); uint64_t imm; TCGv_i64 tcg_res; TCGMemOp sz; + if (mos || imm5) { + unallocated_encoding(s); + return; + } + switch (type) { case 0: sz = MO_32; -- 2.20.1 In the AdvSIMD scalar x indexed element and vector x indexed element encoding group, the SDOT and UDOT instructions are vector only, and their opcode is unallocated in the scalar group. Correctly UNDEF this unallocated encoding. Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20190125182626.9221-8-peter.maydell@linaro.org --- target/arm/translate-a64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) break; case 0x0e: /* SDOT */ case 0x1e: /* UDOT */ - if (size != MO_32 || !dc_isar_feature(aa64_dp, s)) { + if (is_scalar || size != MO_32 || !dc_isar_feature(aa64_dp, s)) { unallocated_encoding(s); return; } -- 2.20.1 The tcg_register_iommu_notifier() code has a GArray of TCGIOMMUNotifier structs which it has registered by passing memory_region_register_iommu_notifier() a pointer to the embedded IOMMUNotifier field. Unfortunately, if we need to enlarge the array via g_array_set_size() this can cause a realloc(), which invalidates the pointer that memory_region_register_iommu_notifier() put into the MemoryRegion's iommu_notify list. This can result in segfaults. Switch the GArray to holding pointers to the TCGIOMMUNotifier structs, so that we can individually allocate and free them. Cc: qemu-stable@nongnu.org Fixes: 1f871c5e6b0f30644a60a ("exec.c: Handle IOMMUs in address_space_translate_for_iotlb()") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190128174241.5860-1-peter.maydell@linaro.org --- exec.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/exec.c b/exec.c index XXXXXXX..XXXXXXX 100644 --- a/exec.c +++ b/exec.c @@ -XXX,XX +XXX,XX @@ static void tcg_register_iommu_notifier(CPUState *cpu, int i; for (i = 0; i < cpu->iommu_notifiers->len; i++) { - notifier = &g_array_index(cpu->iommu_notifiers, TCGIOMMUNotifier, i); + notifier = g_array_index(cpu->iommu_notifiers, TCGIOMMUNotifier *, i); if (notifier->mr == mr && notifier->iommu_idx == iommu_idx) { break; } @@ -XXX,XX +XXX,XX @@ static void tcg_register_iommu_notifier(CPUState *cpu, if (i == cpu->iommu_notifiers->len) { /* Not found, add a new entry at the end of the array */ cpu->iommu_notifiers = g_array_set_size(cpu->iommu_notifiers, i + 1); - notifier = &g_array_index(cpu->iommu_notifiers, TCGIOMMUNotifier, i); + notifier = g_new0(TCGIOMMUNotifier, 1); + g_array_index(cpu->iommu_notifiers, TCGIOMMUNotifier *, i) = notifier; notifier->mr = mr; notifier->iommu_idx = iommu_idx; @@ -XXX,XX +XXX,XX @@ static void tcg_iommu_free_notifier_list(CPUState *cpu) TCGIOMMUNotifier *notifier; for (i = 0; i < cpu->iommu_notifiers->len; i++) { - notifier = &g_array_index(cpu->iommu_notifiers, TCGIOMMUNotifier, i); + notifier = g_array_index(cpu->iommu_notifiers, TCGIOMMUNotifier *, i); memory_region_unregister_iommu_notifier(notifier->mr, &notifier->n); + g_free(notifier); } g_array_free(cpu->iommu_notifiers, true); } @@ -XXX,XX +XXX,XX @@ void cpu_exec_realizefn(CPUState *cpu, Error **errp) vmstate_register(NULL, cpu->cpu_index, cc->vmsd, cpu); } - cpu->iommu_notifiers = g_array_new(false, true, sizeof(TCGIOMMUNotifier)); + cpu->iommu_notifiers = g_array_new(false, true, sizeof(TCGIOMMUNotifier *)); #endif } -- 2.20.1 The FCMLA (by element) instruction exists in the "vector x indexed element" encoding group, but not in the "scalar x indexed element" group. Correctly UNDEF the unallocated encodings. Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20190129140411.682-2-peter.maydell@linaro.org --- target/arm/translate-a64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) case 0x13: /* FCMLA #90 */ case 0x15: /* FCMLA #180 */ case 0x17: /* FCMLA #270 */ - if (!dc_isar_feature(aa64_fcma, s)) { + if (is_scalar || !dc_isar_feature(aa64_fcma, s)) { unallocated_encoding(s); return; } -- 2.20.1 In disas_simd_indexed(), for the case of "complex fp", each indexable element is a complex pair, so the total size is twice that indicated in the 'size' field in the encoding. We were trying to do this "double the size" operation with a left shift by 1, but this is incorrect because the 'size' field is a MO_8/MO_16/MO_32/MO_64 value, and doubling the size should be done by a simple increment. This meant we were mishandling FCMLA (by element) of values where the real and imaginary parts are 32-bit floats, and would incorrectly UNDEF this encoding. (No other insns take this code path, and for 16-bit floats it happens that 1 << 1 and 1 + 1 are both the same). Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20190129140411.682-3-peter.maydell@linaro.org --- target/arm/translate-a64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) case 2: /* complex fp */ /* Each indexable element is a complex pair. */ - size <<= 1; + size += 1; switch (size) { case MO_32: if (h && !is_q) { -- 2.20.1 From: Aaron Lindsay OS <aaron@os.amperecomputing.com> Whenever we notice that a counter overflow has occurred, send an interrupt. This is made more reliable with the addition of a timer in a follow-on commit. Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190124162401.5111-2-aaron@os.amperecomputing.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 61 +++++++++++++++++++++++++++++++++++++-------- 1 file changed, 51 insertions(+), 10 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v6_cp_reginfo[] = { /* Definitions for the PMU registers */ #define PMCRN_MASK 0xf800 #define PMCRN_SHIFT 11 +#define PMCRLC 0x40 #define PMCRDP 0x10 #define PMCRD 0x8 #define PMCRC 0x4 @@ -XXX,XX +XXX,XX @@ static bool pmu_counter_enabled(CPUARMState *env, uint8_t counter) return enabled && !prohibited && !filtered; } +static void pmu_update_irq(CPUARMState *env) +{ + ARMCPU *cpu = arm_env_get_cpu(env); + qemu_set_irq(cpu->pmu_interrupt, (env->cp15.c9_pmcr & PMCRE) && + (env->cp15.c9_pminten & env->cp15.c9_pmovsr)); +} + /* * Ensure c15_ccnt is the guest-visible count so that operations such as * enabling/disabling the counter or filtering, modifying the count itself, @@ -XXX,XX +XXX,XX @@ void pmccntr_op_start(CPUARMState *env) eff_cycles /= 64; } - env->cp15.c15_ccnt = eff_cycles - env->cp15.c15_ccnt_delta; + uint64_t new_pmccntr = eff_cycles - env->cp15.c15_ccnt_delta; + + uint64_t overflow_mask = env->cp15.c9_pmcr & PMCRLC ? \ + 1ull << 63 : 1ull << 31; + if (env->cp15.c15_ccnt & ~new_pmccntr & overflow_mask) { + env->cp15.c9_pmovsr |= (1 << 31); + pmu_update_irq(env); + } + + env->cp15.c15_ccnt = new_pmccntr; } env->cp15.c15_ccnt_delta = cycles; } @@ -XXX,XX +XXX,XX @@ static void pmevcntr_op_start(CPUARMState *env, uint8_t counter) } if (pmu_counter_enabled(env, counter)) { - env->cp15.c14_pmevcntr[counter] = - count - env->cp15.c14_pmevcntr_delta[counter]; + uint32_t new_pmevcntr = count - env->cp15.c14_pmevcntr_delta[counter]; + + if (env->cp15.c14_pmevcntr[counter] & ~new_pmevcntr & INT32_MIN) { + env->cp15.c9_pmovsr |= (1 << counter); + pmu_update_irq(env); + } + env->cp15.c14_pmevcntr[counter] = new_pmevcntr; } env->cp15.c14_pmevcntr_delta[counter] = count; } @@ -XXX,XX +XXX,XX @@ static void pmswinc_write(CPUARMState *env, const ARMCPRegInfo *ri, /* counter is SW_INCR */ (env->cp15.c14_pmevtyper[i] & PMXEVTYPER_EVTCOUNT) == 0x0) { pmevcntr_op_start(env, i); - env->cp15.c14_pmevcntr[i]++; + + /* + * Detect if this write causes an overflow since we can't predict + * PMSWINC overflows like we can for other events + */ + uint32_t new_pmswinc = env->cp15.c14_pmevcntr[i] + 1; + + if (env->cp15.c14_pmevcntr[i] & ~new_pmswinc & INT32_MIN) { + env->cp15.c9_pmovsr |= (1 << i); + pmu_update_irq(env); + } + + env->cp15.c14_pmevcntr[i] = new_pmswinc; + pmevcntr_op_finish(env, i); } } @@ -XXX,XX +XXX,XX @@ static void pmovsr_write(CPUARMState *env, const ARMCPRegInfo *ri, { value &= pmu_counter_mask(env); env->cp15.c9_pmovsr &= ~value; + pmu_update_irq(env); } static void pmovsset_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void pmovsset_write(CPUARMState *env, const ARMCPRegInfo *ri, { value &= pmu_counter_mask(env); env->cp15.c9_pmovsr |= value; + pmu_update_irq(env); } static void pmevtyper_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void pmintenset_write(CPUARMState *env, const ARMCPRegInfo *ri, /* We have no event counters so only the C bit can be changed */ value &= pmu_counter_mask(env); env->cp15.c9_pminten |= value; + pmu_update_irq(env); } static void pmintenclr_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void pmintenclr_write(CPUARMState *env, const ARMCPRegInfo *ri, { value &= pmu_counter_mask(env); env->cp15.c9_pminten &= ~value; + pmu_update_irq(env); } static void vbar_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { .fieldoffset = offsetof(CPUARMState, cp15.c9_pmcnten), .writefn = pmcntenclr_write }, { .name = "PMOVSR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 3, - .access = PL0_RW, + .access = PL0_RW, .type = ARM_CP_IO, .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmovsr), .accessfn = pmreg_access, .writefn = pmovsr_write, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { { .name = "PMOVSCLR_EL0", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 3, .access = PL0_RW, .accessfn = pmreg_access, - .type = ARM_CP_ALIAS, + .type = ARM_CP_ALIAS | ARM_CP_IO, .fieldoffset = offsetof(CPUARMState, cp15.c9_pmovsr), .writefn = pmovsr_write, .raw_writefn = raw_write }, { .name = "PMSWINC", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 4, - .access = PL0_W, .accessfn = pmreg_access_swinc, .type = ARM_CP_NO_RAW, + .access = PL0_W, .accessfn = pmreg_access_swinc, + .type = ARM_CP_NO_RAW | ARM_CP_IO, .writefn = pmswinc_write }, { .name = "PMSWINC_EL0", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 4, - .access = PL0_W, .accessfn = pmreg_access_swinc, .type = ARM_CP_NO_RAW, + .access = PL0_W, .accessfn = pmreg_access_swinc, + .type = ARM_CP_NO_RAW | ARM_CP_IO, .writefn = pmswinc_write }, { .name = "PMSELR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 5, .access = PL0_RW, .type = ARM_CP_ALIAS, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo pmovsset_cp_reginfo[] = { /* PMOVSSET is not implemented in v7 before v7ve */ { .name = "PMOVSSET", .cp = 15, .opc1 = 0, .crn = 9, .crm = 14, .opc2 = 3, .access = PL0_RW, .accessfn = pmreg_access, - .type = ARM_CP_ALIAS, + .type = ARM_CP_ALIAS | ARM_CP_IO, .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmovsr), .writefn = pmovsset_write, .raw_writefn = raw_write }, { .name = "PMOVSSET_EL0", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 14, .opc2 = 3, .access = PL0_RW, .accessfn = pmreg_access, - .type = ARM_CP_ALIAS, + .type = ARM_CP_ALIAS | ARM_CP_IO, .fieldoffset = offsetof(CPUARMState, cp15.c9_pmovsr), .writefn = pmovsset_write, .raw_writefn = raw_write }, -- 2.20.1 From: Aaron Lindsay OS <aaron@os.amperecomputing.com> Make PMU overflow interrupts more accurate by using a timer to predict when they will overflow rather than waiting for an event to occur which allows us to otherwise check them. Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190124162401.5111-3-aaron@os.amperecomputing.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 10 +++++++ target/arm/cpu.c | 12 ++++++++ target/arm/helper.c | 72 +++++++++++++++++++++++++++++++++++++++++++-- 3 files changed, 92 insertions(+), 2 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ARMCPU { /* Timers used by the generic (architected) timer */ QEMUTimer *gt_timer[NUM_GTIMERS]; + /* + * Timer used by the PMU. Its state is restored after migration by + * pmu_op_finish() - it does not need other handling during migration + */ + QEMUTimer *pmu_timer; /* GPIO outputs for generic timer */ qemu_irq gt_timer_outputs[NUM_GTIMERS]; /* GPIO output for GICv3 maintenance interrupt signal */ @@ -XXX,XX +XXX,XX @@ void pmccntr_op_finish(CPUARMState *env); void pmu_op_start(CPUARMState *env); void pmu_op_finish(CPUARMState *env); +/* + * Called when a PMU counter is due to overflow + */ +void arm_pmu_timer_cb(void *opaque); + /** * Functions to register as EL change hooks for PMU mode filtering */ diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_finalizefn(Object *obj) QLIST_REMOVE(hook, node); g_free(hook); } +#ifndef CONFIG_USER_ONLY + if (cpu->pmu_timer) { + timer_del(cpu->pmu_timer); + timer_deinit(cpu->pmu_timer); + timer_free(cpu->pmu_timer); + } +#endif } static void arm_cpu_realizefn(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) arm_register_pre_el_change_hook(cpu, &pmu_pre_el_change, 0); arm_register_el_change_hook(cpu, &pmu_post_el_change, 0); } + +#ifndef CONFIG_USER_ONLY + cpu->pmu_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, arm_pmu_timer_cb, + cpu); +#endif } else { cpu->id_aa64dfr0 &= ~0xf00; cpu->pmceid0 = 0; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ typedef struct pm_event { * counters hold a difference from the return value from this function */ uint64_t (*get_count)(CPUARMState *); + /* + * Return how many nanoseconds it will take (at a minimum) for count events + * to occur. A negative value indicates the counter will never overflow, or + * that the counter has otherwise arranged for the overflow bit to be set + * and the PMU interrupt to be raised on overflow. + */ + int64_t (*ns_per_count)(uint64_t); } pm_event; static bool event_always_supported(CPUARMState *env) @@ -XXX,XX +XXX,XX @@ static uint64_t swinc_get_count(CPUARMState *env) return 0; } +static int64_t swinc_ns_per(uint64_t ignored) +{ + return -1; +} + /* * Return the underlying cycle count for the PMU cycle counters. If we're in * usermode, simply return 0. @@ -XXX,XX +XXX,XX @@ static uint64_t cycles_get_count(CPUARMState *env) } #ifndef CONFIG_USER_ONLY +static int64_t cycles_ns_per(uint64_t cycles) +{ + return (ARM_CPU_FREQ / NANOSECONDS_PER_SECOND) * cycles; +} + static bool instructions_supported(CPUARMState *env) { return use_icount == 1 /* Precise instruction counting */; @@ -XXX,XX +XXX,XX @@ static uint64_t instructions_get_count(CPUARMState *env) { return (uint64_t)cpu_get_icount_raw(); } + +static int64_t instructions_ns_per(uint64_t icount) +{ + return cpu_icount_to_ns((int64_t)icount); +} #endif static const pm_event pm_events[] = { { .number = 0x000, /* SW_INCR */ .supported = event_always_supported, .get_count = swinc_get_count, + .ns_per_count = swinc_ns_per, }, #ifndef CONFIG_USER_ONLY { .number = 0x008, /* INST_RETIRED, Instruction architecturally executed */ .supported = instructions_supported, .get_count = instructions_get_count, + .ns_per_count = instructions_ns_per, }, { .number = 0x011, /* CPU_CYCLES, Cycle */ .supported = event_always_supported, .get_count = cycles_get_count, + .ns_per_count = cycles_ns_per, } #endif }; @@ -XXX,XX +XXX,XX @@ void pmccntr_op_start(CPUARMState *env) void pmccntr_op_finish(CPUARMState *env) { if (pmu_counter_enabled(env, 31)) { - uint64_t prev_cycles = env->cp15.c15_ccnt_delta; +#ifndef CONFIG_USER_ONLY + /* Calculate when the counter will next overflow */ + uint64_t remaining_cycles = -env->cp15.c15_ccnt; + if (!(env->cp15.c9_pmcr & PMCRLC)) { + remaining_cycles = (uint32_t)remaining_cycles; + } + int64_t overflow_in = cycles_ns_per(remaining_cycles); + if (overflow_in > 0) { + int64_t overflow_at = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + + overflow_in; + ARMCPU *cpu = arm_env_get_cpu(env); + timer_mod_anticipate_ns(cpu->pmu_timer, overflow_at); + } +#endif + + uint64_t prev_cycles = env->cp15.c15_ccnt_delta; if (env->cp15.c9_pmcr & PMCRD) { /* Increment once every 64 processor clock cycles */ prev_cycles /= 64; } - env->cp15.c15_ccnt_delta = prev_cycles - env->cp15.c15_ccnt; } } @@ -XXX,XX +XXX,XX @@ static void pmevcntr_op_start(CPUARMState *env, uint8_t counter) static void pmevcntr_op_finish(CPUARMState *env, uint8_t counter) { if (pmu_counter_enabled(env, counter)) { +#ifndef CONFIG_USER_ONLY + uint16_t event = env->cp15.c14_pmevtyper[counter] & PMXEVTYPER_EVTCOUNT; + uint16_t event_idx = supported_event_map[event]; + uint64_t delta = UINT32_MAX - + (uint32_t)env->cp15.c14_pmevcntr[counter] + 1; + int64_t overflow_in = pm_events[event_idx].ns_per_count(delta); + + if (overflow_in > 0) { + int64_t overflow_at = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + + overflow_in; + ARMCPU *cpu = arm_env_get_cpu(env); + timer_mod_anticipate_ns(cpu->pmu_timer, overflow_at); + } +#endif + env->cp15.c14_pmevcntr_delta[counter] -= env->cp15.c14_pmevcntr[counter]; } @@ -XXX,XX +XXX,XX @@ void pmu_post_el_change(ARMCPU *cpu, void *ignored) pmu_op_finish(&cpu->env); } +void arm_pmu_timer_cb(void *opaque) +{ + ARMCPU *cpu = opaque; + + /* + * Update all the counter values based on the current underlying counts, + * triggering interrupts to be raised, if necessary. pmu_op_finish() also + * has the effect of setting the cpu->pmu_timer to the next earliest time a + * counter may expire. + */ + pmu_op_start(&cpu->env); + pmu_op_finish(&cpu->env); +} + static void pmcr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> These bits become writable with the ARMv8.3-PAuth extension. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190129143511.12311-1-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void scr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) if (cpu_isar_feature(aa64_lor, cpu)) { valid_mask |= SCR_TLOR; } + if (cpu_isar_feature(aa64_pauth, cpu)) { + valid_mask |= SCR_API | SCR_APK; + } /* Clear all-context RES0 bits. */ value &= valid_mask; @@ -XXX,XX +XXX,XX @@ static void hcr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) if (cpu_isar_feature(aa64_lor, cpu)) { valid_mask |= HCR_TLOR; } + if (cpu_isar_feature(aa64_pauth, cpu)) { + valid_mask |= HCR_API | HCR_APK; + } /* Clear RES0 bits. */ value &= valid_mask; -- 2.20.1 From: Julia Suvorova <jusual@mail.ru> Until now, the set_pc logic was unclear, which raised questions about whether it should be used directly, applying a value to PC or adding additional checks, for example, set the Thumb bit in Arm cpu. Let's set the set_pc logic for “Configure the PC, as was done in the ELF file” and implement synchronize_with_tb hook for preserving PC to cpu_tb_exec. Signed-off-by: Julia Suvorova <jusual@mail.ru> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20190129121817.7109-1-jusual@mail.ru Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/qom/cpu.h | 16 ++++++++++++++-- hw/arm/boot.c | 4 ---- target/arm/arm-powerctl.c | 3 --- target/arm/cpu.c | 26 +++++++++++++++++++++++++- target/arm/cpu64.c | 15 --------------- 5 files changed, 39 insertions(+), 25 deletions(-) diff --git a/include/qom/cpu.h b/include/qom/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/include/qom/cpu.h +++ b/include/qom/cpu.h @@ -XXX,XX +XXX,XX @@ struct TranslationBlock; * @get_arch_id: Callback for getting architecture-dependent CPU ID. * @get_paging_enabled: Callback for inquiring whether paging is enabled. * @get_memory_mapping: Callback for obtaining the memory mappings. - * @set_pc: Callback for setting the Program Counter register. + * @set_pc: Callback for setting the Program Counter register. This + * should have the semantics used by the target architecture when + * setting the PC from a source such as an ELF file entry point; + * for example on Arm it will also set the Thumb mode bit based + * on the least significant bit of the new PC value. + * If the target behaviour here is anything other than "set + * the PC register to the value passed in" then the target must + * also implement the synchronize_from_tb hook. * @synchronize_from_tb: Callback for synchronizing state from a TCG - * #TranslationBlock. + * #TranslationBlock. This is called when we abandon execution + * of a TB before starting it, and must set all parts of the CPU + * state which the previous TB in the chain may not have updated. + * This always includes at least the program counter; some targets + * will need to do more. If this hook is not implemented then the + * default is to call @set_pc(tb->pc). * @handle_mmu_fault: Callback for handling an MMU fault. * @get_phys_page_debug: Callback for obtaining a physical address. * @get_phys_page_attrs_debug: Callback for obtaining a physical address and the diff --git a/hw/arm/boot.c b/hw/arm/boot.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/boot.c +++ b/hw/arm/boot.c @@ -XXX,XX +XXX,XX @@ static void do_cpu_reset(void *opaque) g_assert_not_reached(); } - if (!env->aarch64) { - env->thumb = info->entry & 1; - entry &= 0xfffffffe; - } cpu_set_pc(cs, entry); } else { /* If we are booting Linux then we need to check whether we are diff --git a/target/arm/arm-powerctl.c b/target/arm/arm-powerctl.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/arm-powerctl.c +++ b/target/arm/arm-powerctl.c @@ -XXX,XX +XXX,XX @@ static void arm_set_cpu_on_async_work(CPUState *target_cpu_state, if (info->target_aa64) { target_cpu->env.xregs[0] = info->context_id; - target_cpu->env.thumb = false; } else { target_cpu->env.regs[0] = info->context_id; - target_cpu->env.thumb = info->entry & 1; - info->entry &= 0xfffffffe; } /* Start the new CPU at the requested address */ diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_set_pc(CPUState *cs, vaddr value) { ARMCPU *cpu = ARM_CPU(cs); + CPUARMState *env = &cpu->env; - cpu->env.regs[15] = value; + if (is_a64(env)) { + env->pc = value; + env->thumb = 0; + } else { + env->regs[15] = value & ~1; + env->thumb = value & 1; + } +} + +static void arm_cpu_synchronize_from_tb(CPUState *cs, TranslationBlock *tb) +{ + ARMCPU *cpu = ARM_CPU(cs); + CPUARMState *env = &cpu->env; + + /* + * It's OK to look at env for the current mode here, because it's + * never possible for an AArch64 TB to chain to an AArch32 TB. + */ + if (is_a64(env)) { + env->pc = tb->pc; + } else { + env->regs[15] = tb->pc; + } } static bool arm_cpu_has_work(CPUState *cs) @@ -XXX,XX +XXX,XX @@ static void arm_cpu_class_init(ObjectClass *oc, void *data) cc->cpu_exec_interrupt = arm_cpu_exec_interrupt; cc->dump_state = arm_cpu_dump_state; cc->set_pc = arm_cpu_set_pc; + cc->synchronize_from_tb = arm_cpu_synchronize_from_tb; cc->gdb_read_register = arm_cpu_gdb_read_register; cc->gdb_write_register = arm_cpu_gdb_write_register; #ifdef CONFIG_USER_ONLY diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_cpu_finalizefn(Object *obj) { } -static void aarch64_cpu_set_pc(CPUState *cs, vaddr value) -{ - ARMCPU *cpu = ARM_CPU(cs); - /* It's OK to look at env for the current mode here, because it's - * never possible for an AArch64 TB to chain to an AArch32 TB. - * (Otherwise we would need to use synchronize_from_tb instead.) - */ - if (is_a64(&cpu->env)) { - cpu->env.pc = value; - } else { - cpu->env.regs[15] = value; - } -} - static gchar *aarch64_gdb_arch_name(CPUState *cs) { return g_strdup("aarch64"); @@ -XXX,XX +XXX,XX @@ static void aarch64_cpu_class_init(ObjectClass *oc, void *data) CPUClass *cc = CPU_CLASS(oc); cc->cpu_exec_interrupt = arm_cpu_exec_interrupt; - cc->set_pc = aarch64_cpu_set_pc; cc->gdb_read_register = aarch64_cpu_gdb_read_register; cc->gdb_write_register = aarch64_cpu_gdb_write_register; cc->gdb_num_core_regs = 34; -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Drop the pac properties. This approach cannot work as written because the properties are applied before arm_cpu_reset, which zeros SCTLR_EL1 (amongst everything else). We can re-introduce the properties if they turn out to be useful. But since linux 5.0 enables all of the keys, they may not be. Fixes: 1ae9cfbd470 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 3 +++ target/arm/cpu64.c | 60 ---------------------------------------------- 2 files changed, 3 insertions(+), 60 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(CPUState *s) env->pstate = PSTATE_MODE_EL0t; /* Userspace expects access to DC ZVA, CTL_EL0 and the cache ops */ env->cp15.sctlr_el[1] |= SCTLR_UCT | SCTLR_UCI | SCTLR_DZE; + /* Enable all PAC keys. */ + env->cp15.sctlr_el[1] |= (SCTLR_EnIA | SCTLR_EnIB | + SCTLR_EnDA | SCTLR_EnDB); /* Enable all PAC instructions */ env->cp15.hcr_el2 |= HCR_API; env->cp15.scr_el3 |= SCR_API; diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void cpu_max_set_sve_vq(Object *obj, Visitor *v, const char *name, error_propagate(errp, err); } -#ifdef CONFIG_USER_ONLY -static void cpu_max_get_packey(Object *obj, Visitor *v, const char *name, - void *opaque, Error **errp) -{ - ARMCPU *cpu = ARM_CPU(obj); - const uint64_t *bit = opaque; - bool enabled = (cpu->env.cp15.sctlr_el[1] & *bit) != 0; - - visit_type_bool(v, name, &enabled, errp); -} - -static void cpu_max_set_packey(Object *obj, Visitor *v, const char *name, - void *opaque, Error **errp) -{ - ARMCPU *cpu = ARM_CPU(obj); - Error *err = NULL; - const uint64_t *bit = opaque; - bool enabled; - - visit_type_bool(v, name, &enabled, errp); - - if (!err) { - if (enabled) { - cpu->env.cp15.sctlr_el[1] |= *bit; - } else { - cpu->env.cp15.sctlr_el[1] &= ~*bit; - } - } - error_propagate(errp, err); -} -#endif - /* -cpu max: if KVM is enabled, like -cpu host (best possible with this host); * otherwise, a CPU with as many features enabled as our emulation supports. * The version of '-cpu max' for qemu-system-arm is defined in cpu.c; @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) */ cpu->ctr = 0x80038003; /* 32 byte I and D cacheline size, VIPT icache */ cpu->dcz_blocksize = 7; /* 512 bytes */ - - /* - * Note that Linux will enable enable all of the keys at once. - * But doing it this way will allow experimentation beyond that. - */ - { - static const uint64_t apia_bit = SCTLR_EnIA; - static const uint64_t apib_bit = SCTLR_EnIB; - static const uint64_t apda_bit = SCTLR_EnDA; - static const uint64_t apdb_bit = SCTLR_EnDB; - - object_property_add(obj, "apia", "bool", cpu_max_get_packey, - cpu_max_set_packey, NULL, - (void *)&apia_bit, &error_fatal); - object_property_add(obj, "apib", "bool", cpu_max_get_packey, - cpu_max_set_packey, NULL, - (void *)&apib_bit, &error_fatal); - object_property_add(obj, "apda", "bool", cpu_max_get_packey, - cpu_max_set_packey, NULL, - (void *)&apda_bit, &error_fatal); - object_property_add(obj, "apdb", "bool", cpu_max_get_packey, - cpu_max_set_packey, NULL, - (void *)&apdb_bit, &error_fatal); - - /* Enable all PAC keys by default. */ - cpu->env.cp15.sctlr_el[1] |= SCTLR_EnIA | SCTLR_EnIB; - cpu->env.cp15.sctlr_el[1] |= SCTLR_EnDA | SCTLR_EnDB; - } #endif cpu->sve_max_vq = ARM_MAX_VQ; -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/elfload.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ enum { ARM_HWCAP_A64_ASIMDDP = 1 << 20, ARM_HWCAP_A64_SHA512 = 1 << 21, ARM_HWCAP_A64_SVE = 1 << 22, + ARM_HWCAP_A64_ASIMDFHM = 1 << 23, + ARM_HWCAP_A64_DIT = 1 << 24, + ARM_HWCAP_A64_USCAT = 1 << 25, + ARM_HWCAP_A64_ILRCPC = 1 << 26, + ARM_HWCAP_A64_FLAGM = 1 << 27, + ARM_HWCAP_A64_SSBS = 1 << 28, + ARM_HWCAP_A64_SB = 1 << 29, + ARM_HWCAP_A64_PACA = 1 << 30, + ARM_HWCAP_A64_PACG = 1UL << 31, }; #define ELF_HWCAP get_elf_hwcap() -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/elfload.c | 1 + 1 file changed, 1 insertion(+) diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ static uint32_t get_elf_hwcap(void) GET_FEATURE_ID(aa64_dp, ARM_HWCAP_A64_ASIMDDP); GET_FEATURE_ID(aa64_fcma, ARM_HWCAP_A64_FCMA); GET_FEATURE_ID(aa64_sve, ARM_HWCAP_A64_SVE); + GET_FEATURE_ID(aa64_pauth, ARM_HWCAP_A64_PACA | ARM_HWCAP_A64_PACG); #undef GET_FEATURE_ID -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Initialize the keys to a non-zero value on process start. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/aarch64/target_syscall.h | 2 ++ linux-user/aarch64/cpu_loop.c | 31 +++++++++++++++++++++++++++-- 2 files changed, 31 insertions(+), 2 deletions(-) diff --git a/linux-user/aarch64/target_syscall.h b/linux-user/aarch64/target_syscall.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/target_syscall.h +++ b/linux-user/aarch64/target_syscall.h @@ -XXX,XX +XXX,XX @@ struct target_pt_regs { #define TARGET_PR_SVE_SET_VL 50 #define TARGET_PR_SVE_GET_VL 51 +void arm_init_pauth_key(ARMPACKey *key); + #endif /* AARCH64_TARGET_SYSCALL_H */ diff --git a/linux-user/aarch64/cpu_loop.c b/linux-user/aarch64/cpu_loop.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/cpu_loop.c +++ b/linux-user/aarch64/cpu_loop.c @@ -XXX,XX +XXX,XX @@ void cpu_loop(CPUARMState *env) } } +static uint64_t arm_rand64(void) +{ + int shift = 64 - clz64(RAND_MAX); + int i, n = 64 / shift + (64 % shift != 0); + uint64_t ret = 0; + + for (i = 0; i < n; i++) { + ret = (ret << shift) | rand(); + } + return ret; +} + +void arm_init_pauth_key(ARMPACKey *key) +{ + key->lo = arm_rand64(); + key->hi = arm_rand64(); +} + void target_cpu_copy_regs(CPUArchState *env, struct target_pt_regs *regs) { - CPUState *cpu = ENV_GET_CPU(env); - TaskState *ts = cpu->opaque; + ARMCPU *cpu = arm_env_get_cpu(env); + CPUState *cs = CPU(cpu); + TaskState *ts = cs->opaque; struct image_info *info = ts->info; int i; @@ -XXX,XX +XXX,XX @@ void target_cpu_copy_regs(CPUArchState *env, struct target_pt_regs *regs) } #endif + if (cpu_isar_feature(aa64_pauth, cpu)) { + arm_init_pauth_key(&env->apia_key); + arm_init_pauth_key(&env->apib_key); + arm_init_pauth_key(&env->apda_key); + arm_init_pauth_key(&env->apdb_key); + arm_init_pauth_key(&env->apga_key); + } + ts->stack_base = info->start_stack; ts->heap_base = info->brk; /* This will be filled in on the first SYS_HEAPINFO call. */ -- 2.20.1 From: Remi Denis-Courmont <remi.denis.courmont@huawei.com> Since QEMU does not support the ARMv8.2-LVA, Large Virtual Address, extension (yet), the VA address space is 48-bits plus a sign bit. User mode can only handle the positive half of the address space, so that makes a limit of 48 bits. (With LVA, it would be 53 and 52 bits respectively.) The incorrectly large address space conflicts with PAuth instructions, which use bits 48-54 and 56-63 for the pointer authentication code. This also conflicts with (as yet unsupported by QEMU) data tagging and with the ARMv8.5-MTE extension. Signed-off-by: Remi Denis-Courmont <remi.denis.courmont@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ bool write_cpustate_to_list(ARMCPU *cpu); #if defined(TARGET_AARCH64) # define TARGET_PHYS_ADDR_SPACE_BITS 48 -# define TARGET_VIRT_ADDR_SPACE_BITS 64 +# define TARGET_VIRT_ADDR_SPACE_BITS 48 #else # define TARGET_PHYS_ADDR_SPACE_BITS 40 # define TARGET_VIRT_ADDR_SPACE_BITS 32 -- 2.20.1 From: Remi Denis-Courmont <remi.denis.courmont@huawei.com> A flawed test lead to the instructions always being treated as unallocated encodings. Fixes: https://bugs.launchpad.net/bugs/1813460 Signed-off-by: Remi Denis-Courmont <remi.denis.courmont@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_uncond_b_reg(DisasContext *s, uint32_t insn) if (!dc_isar_feature(aa64_pauth, s)) { goto do_unallocated; } - if (op3 != 2 || op3 != 3) { + if ((op3 & ~1) != 2) { goto do_unallocated; } if (s->pauth_active) { -- 2.20.1 From: Steffen Görtz <contrib@steffen-goertz.de> The nRF51 contains three regions of non-volatile memory (NVM): - CODE (R/W): contains code - FICR (R): Factory information like code size, chip id etc. - UICR (R/W): Changeable configuration data. Lock bits, Code protection configuration, Bootloader address, Nordic SoftRadio configuration, Firmware configuration. Read and write access to the memories is managed by the Non-volatile memory controller. Memory schema: [ CPU ] -+- [ NVM, either FICR, UICR or CODE ] | | \- [ NVMC ] Signed-off-by: Steffen Görtz <contrib@steffen-goertz.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Tested-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190201023357.22596-2-stefanha@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/nvram/Makefile.objs | 1 + include/hw/nvram/nrf51_nvm.h | 64 ++++++ hw/nvram/nrf51_nvm.c | 388 +++++++++++++++++++++++++++++++++++ 3 files changed, 453 insertions(+) create mode 100644 include/hw/nvram/nrf51_nvm.h create mode 100644 hw/nvram/nrf51_nvm.c diff --git a/hw/nvram/Makefile.objs b/hw/nvram/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/nvram/Makefile.objs +++ b/hw/nvram/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-y += fw_cfg.o common-obj-y += chrp_nvram.o common-obj-$(CONFIG_MAC_NVRAM) += mac_nvram.o obj-$(CONFIG_PSERIES) += spapr_nvram.o +obj-$(CONFIG_NRF51_SOC) += nrf51_nvm.o diff --git a/include/hw/nvram/nrf51_nvm.h b/include/hw/nvram/nrf51_nvm.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/nvram/nrf51_nvm.h @@ -XXX,XX +XXX,XX @@ +/* + * Nordic Semiconductor nRF51 non-volatile memory + * + * It provides an interface to erase regions in flash memory. + * Furthermore it provides the user and factory information registers. + * + * QEMU interface: + * + sysbus MMIO regions 0: NVMC peripheral registers + * + sysbus MMIO regions 1: FICR peripheral registers + * + sysbus MMIO regions 2: UICR peripheral registers + * + flash-size property: flash size in bytes. + * + * Accuracy of the peripheral model: + * + Code regions (MPU configuration) are disregarded. + * + * Copyright 2018 Steffen Görtz <contrib@steffen-goertz.de> + * + * This code is licensed under the GPL version 2 or later. See + * the COPYING file in the top-level directory. + * + */ +#ifndef NRF51_NVM_H +#define NRF51_NVM_H + +#include "hw/sysbus.h" +#define TYPE_NRF51_NVM "nrf51_soc.nvm" +#define NRF51_NVM(obj) OBJECT_CHECK(NRF51NVMState, (obj), TYPE_NRF51_NVM) + +#define NRF51_UICR_FIXTURE_SIZE 64 + +#define NRF51_NVMC_SIZE 0x1000 + +#define NRF51_NVMC_READY 0x400 +#define NRF51_NVMC_READY_READY 0x01 +#define NRF51_NVMC_CONFIG 0x504 +#define NRF51_NVMC_CONFIG_MASK 0x03 +#define NRF51_NVMC_CONFIG_WEN 0x01 +#define NRF51_NVMC_CONFIG_EEN 0x02 +#define NRF51_NVMC_ERASEPCR1 0x508 +#define NRF51_NVMC_ERASEPCR0 0x510 +#define NRF51_NVMC_ERASEALL 0x50C +#define NRF51_NVMC_ERASEUICR 0x514 +#define NRF51_NVMC_ERASE 0x01 + +#define NRF51_UICR_SIZE 0x100 + +typedef struct NRF51NVMState { + SysBusDevice parent_obj; + + MemoryRegion mmio; + MemoryRegion ficr; + MemoryRegion uicr; + MemoryRegion flash; + + uint32_t uicr_content[NRF51_UICR_FIXTURE_SIZE]; + uint32_t flash_size; + uint8_t *storage; + + uint32_t config; + +} NRF51NVMState; + + +#endif diff --git a/hw/nvram/nrf51_nvm.c b/hw/nvram/nrf51_nvm.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/nvram/nrf51_nvm.c @@ -XXX,XX +XXX,XX @@ +/* + * Nordic Semiconductor nRF51 non-volatile memory + * + * It provides an interface to erase regions in flash memory. + * Furthermore it provides the user and factory information registers. + * + * Reference Manual: http://infocenter.nordicsemi.com/pdf/nRF51_RM_v3.0.pdf + * + * See nRF51 reference manual and product sheet sections: + * + Non-Volatile Memory Controller (NVMC) + * + Factory Information Configuration Registers (FICR) + * + User Information Configuration Registers (UICR) + * + * Copyright 2018 Steffen Görtz <contrib@steffen-goertz.de> + * + * This code is licensed under the GPL version 2 or later. See + * the COPYING file in the top-level directory. + */ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "qemu/log.h" +#include "exec/address-spaces.h" +#include "hw/arm/nrf51.h" +#include "hw/nvram/nrf51_nvm.h" + +/* + * FICR Registers Assignments + * CODEPAGESIZE 0x010 + * CODESIZE 0x014 + * CLENR0 0x028 + * PPFC 0x02C + * NUMRAMBLOCK 0x034 + * SIZERAMBLOCKS 0x038 + * SIZERAMBLOCK[0] 0x038 + * SIZERAMBLOCK[1] 0x03C + * SIZERAMBLOCK[2] 0x040 + * SIZERAMBLOCK[3] 0x044 + * CONFIGID 0x05C + * DEVICEID[0] 0x060 + * DEVICEID[1] 0x064 + * ER[0] 0x080 + * ER[1] 0x084 + * ER[2] 0x088 + * ER[3] 0x08C + * IR[0] 0x090 + * IR[1] 0x094 + * IR[2] 0x098 + * IR[3] 0x09C + * DEVICEADDRTYPE 0x0A0 + * DEVICEADDR[0] 0x0A4 + * DEVICEADDR[1] 0x0A8 + * OVERRIDEEN 0x0AC + * NRF_1MBIT[0] 0x0B0 + * NRF_1MBIT[1] 0x0B4 + * NRF_1MBIT[2] 0x0B8 + * NRF_1MBIT[3] 0x0BC + * NRF_1MBIT[4] 0x0C0 + * BLE_1MBIT[0] 0x0EC + * BLE_1MBIT[1] 0x0F0 + * BLE_1MBIT[2] 0x0F4 + * BLE_1MBIT[3] 0x0F8 + * BLE_1MBIT[4] 0x0FC + */ +static const uint32_t ficr_content[64] = { + 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0x00000400, + 0x00000100, 0xFFFFFFFF, 0xFFFFFFFF, 0x00000002, 0x00002000, + 0x00002000, 0x00002000, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, + 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, + 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0x00000003, + 0x12345678, 0x9ABCDEF1, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, + 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, + 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, + 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, + 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, + 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, + 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, + 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF +}; + +static uint64_t ficr_read(void *opaque, hwaddr offset, unsigned int size) +{ + assert(offset < sizeof(ficr_content)); + return ficr_content[offset / 4]; +} + +static void ficr_write(void *opaque, hwaddr offset, uint64_t value, + unsigned int size) +{ + /* Intentionally do nothing */ +} + +static const MemoryRegionOps ficr_ops = { + .read = ficr_read, + .write = ficr_write, + .impl.min_access_size = 4, + .impl.max_access_size = 4, + .endianness = DEVICE_LITTLE_ENDIAN +}; + +/* + * UICR Registers Assignments + * CLENR0 0x000 + * RBPCONF 0x004 + * XTALFREQ 0x008 + * FWID 0x010 + * BOOTLOADERADDR 0x014 + * NRFFW[0] 0x014 + * NRFFW[1] 0x018 + * NRFFW[2] 0x01C + * NRFFW[3] 0x020 + * NRFFW[4] 0x024 + * NRFFW[5] 0x028 + * NRFFW[6] 0x02C + * NRFFW[7] 0x030 + * NRFFW[8] 0x034 + * NRFFW[9] 0x038 + * NRFFW[10] 0x03C + * NRFFW[11] 0x040 + * NRFFW[12] 0x044 + * NRFFW[13] 0x048 + * NRFFW[14] 0x04C + * NRFHW[0] 0x050 + * NRFHW[1] 0x054 + * NRFHW[2] 0x058 + * NRFHW[3] 0x05C + * NRFHW[4] 0x060 + * NRFHW[5] 0x064 + * NRFHW[6] 0x068 + * NRFHW[7] 0x06C + * NRFHW[8] 0x070 + * NRFHW[9] 0x074 + * NRFHW[10] 0x078 + * NRFHW[11] 0x07C + * CUSTOMER[0] 0x080 + * CUSTOMER[1] 0x084 + * CUSTOMER[2] 0x088 + * CUSTOMER[3] 0x08C + * CUSTOMER[4] 0x090 + * CUSTOMER[5] 0x094 + * CUSTOMER[6] 0x098 + * CUSTOMER[7] 0x09C + * CUSTOMER[8] 0x0A0 + * CUSTOMER[9] 0x0A4 + * CUSTOMER[10] 0x0A8 + * CUSTOMER[11] 0x0AC + * CUSTOMER[12] 0x0B0 + * CUSTOMER[13] 0x0B4 + * CUSTOMER[14] 0x0B8 + * CUSTOMER[15] 0x0BC + * CUSTOMER[16] 0x0C0 + * CUSTOMER[17] 0x0C4 + * CUSTOMER[18] 0x0C8 + * CUSTOMER[19] 0x0CC + * CUSTOMER[20] 0x0D0 + * CUSTOMER[21] 0x0D4 + * CUSTOMER[22] 0x0D8 + * CUSTOMER[23] 0x0DC + * CUSTOMER[24] 0x0E0 + * CUSTOMER[25] 0x0E4 + * CUSTOMER[26] 0x0E8 + * CUSTOMER[27] 0x0EC + * CUSTOMER[28] 0x0F0 + * CUSTOMER[29] 0x0F4 + * CUSTOMER[30] 0x0F8 + * CUSTOMER[31] 0x0FC + */ + +static uint64_t uicr_read(void *opaque, hwaddr offset, unsigned int size) +{ + NRF51NVMState *s = NRF51_NVM(opaque); + + assert(offset < sizeof(s->uicr_content)); + return s->uicr_content[offset / 4]; +} + +static void uicr_write(void *opaque, hwaddr offset, uint64_t value, + unsigned int size) +{ + NRF51NVMState *s = NRF51_NVM(opaque); + + assert(offset < sizeof(s->uicr_content)); + s->uicr_content[offset / 4] = value; +} + +static const MemoryRegionOps uicr_ops = { + .read = uicr_read, + .write = uicr_write, + .impl.min_access_size = 4, + .impl.max_access_size = 4, + .endianness = DEVICE_LITTLE_ENDIAN +}; + + +static uint64_t io_read(void *opaque, hwaddr offset, unsigned int size) +{ + NRF51NVMState *s = NRF51_NVM(opaque); + uint64_t r = 0; + + switch (offset) { + case NRF51_NVMC_READY: + r = NRF51_NVMC_READY_READY; + break; + case NRF51_NVMC_CONFIG: + r = s->config; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: bad read offset 0x%" HWADDR_PRIx "\n", __func__, offset); + break; + } + + return r; +} + +static void io_write(void *opaque, hwaddr offset, uint64_t value, + unsigned int size) +{ + NRF51NVMState *s = NRF51_NVM(opaque); + + switch (offset) { + case NRF51_NVMC_CONFIG: + s->config = value & NRF51_NVMC_CONFIG_MASK; + break; + case NRF51_NVMC_ERASEPCR0: + case NRF51_NVMC_ERASEPCR1: + if (s->config & NRF51_NVMC_CONFIG_EEN) { + /* Mask in-page sub address */ + value &= ~(NRF51_PAGE_SIZE - 1); + if (value <= (s->flash_size - NRF51_PAGE_SIZE)) { + memset(s->storage + value, 0xFF, NRF51_PAGE_SIZE); + memory_region_flush_rom_device(&s->flash, value, + NRF51_PAGE_SIZE); + } + } else { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Flash erase at 0x%" HWADDR_PRIx" while flash not erasable.\n", + __func__, offset); + } + break; + case NRF51_NVMC_ERASEALL: + if (value == NRF51_NVMC_ERASE) { + if (s->config & NRF51_NVMC_CONFIG_EEN) { + memset(s->storage, 0xFF, s->flash_size); + memory_region_flush_rom_device(&s->flash, 0, s->flash_size); + memset(s->uicr_content, 0xFF, sizeof(s->uicr_content)); + } else { + qemu_log_mask(LOG_GUEST_ERROR, "%s: Flash not erasable.\n", + __func__); + } + } + break; + case NRF51_NVMC_ERASEUICR: + if (value == NRF51_NVMC_ERASE) { + memset(s->uicr_content, 0xFF, sizeof(s->uicr_content)); + } + break; + + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: bad write offset 0x%" HWADDR_PRIx "\n", __func__, offset); + } +} + +static const MemoryRegionOps io_ops = { + .read = io_read, + .write = io_write, + .impl.min_access_size = 4, + .impl.max_access_size = 4, + .endianness = DEVICE_LITTLE_ENDIAN, +}; + + +static void flash_write(void *opaque, hwaddr offset, uint64_t value, + unsigned int size) +{ + NRF51NVMState *s = NRF51_NVM(opaque); + + if (s->config & NRF51_NVMC_CONFIG_WEN) { + uint32_t oldval; + + assert(offset + size <= s->flash_size); + + /* NOR Flash only allows bits to be flipped from 1's to 0's on write */ + oldval = ldl_le_p(s->storage + offset); + oldval &= value; + stl_le_p(s->storage + offset, oldval); + + memory_region_flush_rom_device(&s->flash, offset, size); + } else { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Flash write 0x%" HWADDR_PRIx" while flash not writable.\n", + __func__, offset); + } +} + + + +static const MemoryRegionOps flash_ops = { + .write = flash_write, + .valid.min_access_size = 4, + .valid.max_access_size = 4, + .endianness = DEVICE_LITTLE_ENDIAN, +}; + +static void nrf51_nvm_init(Object *obj) +{ + NRF51NVMState *s = NRF51_NVM(obj); + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + + memory_region_init_io(&s->mmio, obj, &io_ops, s, "nrf51_soc.nvmc", + NRF51_NVMC_SIZE); + sysbus_init_mmio(sbd, &s->mmio); + + memory_region_init_io(&s->ficr, obj, &ficr_ops, s, "nrf51_soc.ficr", + sizeof(ficr_content)); + sysbus_init_mmio(sbd, &s->ficr); + + memory_region_init_io(&s->uicr, obj, &uicr_ops, s, "nrf51_soc.uicr", + sizeof(s->uicr_content)); + sysbus_init_mmio(sbd, &s->uicr); +} + +static void nrf51_nvm_realize(DeviceState *dev, Error **errp) +{ + NRF51NVMState *s = NRF51_NVM(dev); + Error *err = NULL; + + memory_region_init_rom_device(&s->flash, OBJECT(dev), &flash_ops, s, + "nrf51_soc.flash", s->flash_size, &err); + if (err) { + error_propagate(errp, err); + return; + } + + s->storage = memory_region_get_ram_ptr(&s->flash); + sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->flash); +} + +static void nrf51_nvm_reset(DeviceState *dev) +{ + NRF51NVMState *s = NRF51_NVM(dev); + + s->config = 0x00; + memset(s->uicr_content, 0xFF, sizeof(s->uicr_content)); +} + +static Property nrf51_nvm_properties[] = { + DEFINE_PROP_UINT32("flash-size", NRF51NVMState, flash_size, 0x40000), + DEFINE_PROP_END_OF_LIST(), +}; + +static const VMStateDescription vmstate_nvm = { + .name = "nrf51_soc.nvm", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(uicr_content, NRF51NVMState, + NRF51_UICR_FIXTURE_SIZE), + VMSTATE_UINT32(config, NRF51NVMState), + VMSTATE_END_OF_LIST() + } +}; + +static void nrf51_nvm_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->props = nrf51_nvm_properties; + dc->vmsd = &vmstate_nvm; + dc->realize = nrf51_nvm_realize; + dc->reset = nrf51_nvm_reset; +} + +static const TypeInfo nrf51_nvm_info = { + .name = TYPE_NRF51_NVM, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(NRF51NVMState), + .instance_init = nrf51_nvm_init, + .class_init = nrf51_nvm_class_init +}; + +static void nrf51_nvm_register_types(void) +{ + type_register_static(&nrf51_nvm_info); +} + +type_init(nrf51_nvm_register_types) -- 2.20.1 From: Steffen Görtz <contrib@steffen-goertz.de> Instantiates UICR, FICR, FLASH and NVMC in nRF51 SOC. Signed-off-by: Steffen Görtz <contrib@steffen-goertz.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20190201023357.22596-3-stefanha@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/nrf51_soc.h | 2 ++ hw/arm/nrf51_soc.c | 41 +++++++++++++++++++++++++++----------- 2 files changed, 31 insertions(+), 12 deletions(-) diff --git a/include/hw/arm/nrf51_soc.h b/include/hw/arm/nrf51_soc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/nrf51_soc.h +++ b/include/hw/arm/nrf51_soc.h @@ -XXX,XX +XXX,XX @@ #include "hw/char/nrf51_uart.h" #include "hw/misc/nrf51_rng.h" #include "hw/gpio/nrf51_gpio.h" +#include "hw/nvram/nrf51_nvm.h" #include "hw/timer/nrf51_timer.h" #define TYPE_NRF51_SOC "nrf51-soc" @@ -XXX,XX +XXX,XX @@ typedef struct NRF51State { NRF51UARTState uart; NRF51RNGState rng; + NRF51NVMState nvm; NRF51GPIOState gpio; NRF51TimerState timer[NRF51_NUM_TIMERS]; diff --git a/hw/arm/nrf51_soc.c b/hw/arm/nrf51_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nrf51_soc.c +++ b/hw/arm/nrf51_soc.c @@ -XXX,XX +XXX,XX @@ * are supported in the future, add a sub-class of NRF51SoC for * the specific variants */ -#define NRF51822_FLASH_SIZE (256 * NRF51_PAGE_SIZE) -#define NRF51822_SRAM_SIZE (16 * NRF51_PAGE_SIZE) +#define NRF51822_FLASH_PAGES 256 +#define NRF51822_SRAM_PAGES 16 +#define NRF51822_FLASH_SIZE (NRF51822_FLASH_PAGES * NRF51_PAGE_SIZE) +#define NRF51822_SRAM_SIZE (NRF51822_SRAM_PAGES * NRF51_PAGE_SIZE) #define BASE_TO_IRQ(base) ((base >> 12) & 0x1F) @@ -XXX,XX +XXX,XX @@ static void nrf51_soc_realize(DeviceState *dev_soc, Error **errp) memory_region_add_subregion_overlap(&s->container, 0, s->board_memory, -1); - memory_region_init_rom(&s->flash, OBJECT(s), "nrf51.flash", s->flash_size, - &err); - if (err) { - error_propagate(errp, err); - return; - } - memory_region_add_subregion(&s->container, NRF51_FLASH_BASE, &s->flash); - memory_region_init_ram(&s->sram, OBJECT(s), "nrf51.sram", s->sram_size, &err); if (err) { @@ -XXX,XX +XXX,XX @@ static void nrf51_soc_realize(DeviceState *dev_soc, Error **errp) qdev_get_gpio_in(DEVICE(&s->cpu), BASE_TO_IRQ(NRF51_RNG_BASE))); + /* UICR, FICR, NVMC, FLASH */ + object_property_set_uint(OBJECT(&s->nvm), s->flash_size, "flash-size", + &err); + if (err) { + error_propagate(errp, err); + return; + } + + object_property_set_bool(OBJECT(&s->nvm), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + + mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->nvm), 0); + memory_region_add_subregion_overlap(&s->container, NRF51_NVMC_BASE, mr, 0); + mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->nvm), 1); + memory_region_add_subregion_overlap(&s->container, NRF51_FICR_BASE, mr, 0); + mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->nvm), 2); + memory_region_add_subregion_overlap(&s->container, NRF51_UICR_BASE, mr, 0); + mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->nvm), 3); + memory_region_add_subregion_overlap(&s->container, NRF51_FLASH_BASE, mr, 0); + /* GPIO */ object_property_set_bool(OBJECT(&s->gpio), true, "realized", &err); if (err) { @@ -XXX,XX +XXX,XX @@ static void nrf51_soc_realize(DeviceState *dev_soc, Error **errp) create_unimplemented_device("nrf51_soc.io", NRF51_IOMEM_BASE, NRF51_IOMEM_SIZE); - create_unimplemented_device("nrf51_soc.ficr", NRF51_FICR_BASE, - NRF51_FICR_SIZE); create_unimplemented_device("nrf51_soc.private", NRF51_PRIVATE_BASE, NRF51_PRIVATE_SIZE); } @@ -XXX,XX +XXX,XX @@ static void nrf51_soc_init(Object *obj) sysbus_init_child_obj(obj, "rng", &s->rng, sizeof(s->rng), TYPE_NRF51_RNG); + sysbus_init_child_obj(obj, "nvm", &s->nvm, sizeof(s->nvm), TYPE_NRF51_NVM); + sysbus_init_child_obj(obj, "gpio", &s->gpio, sizeof(s->gpio), TYPE_NRF51_GPIO); -- 2.20.1 From: Steffen Görtz <contrib@steffen-goertz.de> Signed-off-by: Steffen Görtz <contrib@steffen-goertz.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190201023357.22596-4-stefanha@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/microbit-test.c | 108 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 108 insertions(+) diff --git a/tests/microbit-test.c b/tests/microbit-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/microbit-test.c +++ b/tests/microbit-test.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/nrf51.h" #include "hw/char/nrf51_uart.h" #include "hw/gpio/nrf51_gpio.h" +#include "hw/nvram/nrf51_nvm.h" #include "hw/timer/nrf51_timer.h" #include "hw/i2c/microbit_i2c.h" @@ -XXX,XX +XXX,XX @@ static void test_microbit_i2c(void) qtest_quit(qts); } +#define FLASH_SIZE (256 * NRF51_PAGE_SIZE) + +static void fill_and_erase(QTestState *qts, hwaddr base, hwaddr size, + uint32_t address_reg) +{ + hwaddr i; + + /* Erase Page */ + qtest_writel(qts, NRF51_NVMC_BASE + NRF51_NVMC_CONFIG, 0x02); + qtest_writel(qts, NRF51_NVMC_BASE + address_reg, base); + qtest_writel(qts, NRF51_NVMC_BASE + NRF51_NVMC_CONFIG, 0x00); + + /* Check memory */ + for (i = 0; i < size / 4; i++) { + g_assert_cmpuint(qtest_readl(qts, base + i * 4), ==, 0xFFFFFFFF); + } + + /* Fill memory */ + qtest_writel(qts, NRF51_NVMC_BASE + NRF51_NVMC_CONFIG, 0x01); + for (i = 0; i < size / 4; i++) { + qtest_writel(qts, base + i * 4, i); + g_assert_cmpuint(qtest_readl(qts, base + i * 4), ==, i); + } + qtest_writel(qts, NRF51_NVMC_BASE + NRF51_NVMC_CONFIG, 0x00); +} + +static void test_nrf51_nvmc(void) +{ + uint32_t value; + hwaddr i; + QTestState *qts = qtest_init("-M microbit"); + + /* Test always ready */ + value = qtest_readl(qts, NRF51_NVMC_BASE + NRF51_NVMC_READY); + g_assert_cmpuint(value & 0x01, ==, 0x01); + + /* Test write-read config register */ + qtest_writel(qts, NRF51_NVMC_BASE + NRF51_NVMC_CONFIG, 0x03); + g_assert_cmpuint(qtest_readl(qts, NRF51_NVMC_BASE + NRF51_NVMC_CONFIG), + ==, 0x03); + qtest_writel(qts, NRF51_NVMC_BASE + NRF51_NVMC_CONFIG, 0x00); + g_assert_cmpuint(qtest_readl(qts, NRF51_NVMC_BASE + NRF51_NVMC_CONFIG), + ==, 0x00); + + /* Test PCR0 */ + fill_and_erase(qts, NRF51_FLASH_BASE, NRF51_PAGE_SIZE, + NRF51_NVMC_ERASEPCR0); + fill_and_erase(qts, NRF51_FLASH_BASE + NRF51_PAGE_SIZE, + NRF51_PAGE_SIZE, NRF51_NVMC_ERASEPCR0); + + /* Test PCR1 */ + fill_and_erase(qts, NRF51_FLASH_BASE, NRF51_PAGE_SIZE, + NRF51_NVMC_ERASEPCR1); + fill_and_erase(qts, NRF51_FLASH_BASE + NRF51_PAGE_SIZE, + NRF51_PAGE_SIZE, NRF51_NVMC_ERASEPCR1); + + /* Erase all */ + qtest_writel(qts, NRF51_NVMC_BASE + NRF51_NVMC_CONFIG, 0x02); + qtest_writel(qts, NRF51_NVMC_BASE + NRF51_NVMC_ERASEALL, 0x01); + qtest_writel(qts, NRF51_NVMC_BASE + NRF51_NVMC_CONFIG, 0x00); + + qtest_writel(qts, NRF51_NVMC_BASE + NRF51_NVMC_CONFIG, 0x01); + for (i = 0; i < FLASH_SIZE / 4; i++) { + qtest_writel(qts, NRF51_FLASH_BASE + i * 4, i); + g_assert_cmpuint(qtest_readl(qts, NRF51_FLASH_BASE + i * 4), ==, i); + } + qtest_writel(qts, NRF51_NVMC_BASE + NRF51_NVMC_CONFIG, 0x00); + + qtest_writel(qts, NRF51_NVMC_BASE + NRF51_NVMC_CONFIG, 0x02); + qtest_writel(qts, NRF51_NVMC_BASE + NRF51_NVMC_ERASEALL, 0x01); + qtest_writel(qts, NRF51_NVMC_BASE + NRF51_NVMC_CONFIG, 0x00); + + for (i = 0; i < FLASH_SIZE / 4; i++) { + g_assert_cmpuint(qtest_readl(qts, NRF51_FLASH_BASE + i * 4), + ==, 0xFFFFFFFF); + } + + /* Erase UICR */ + qtest_writel(qts, NRF51_NVMC_BASE + NRF51_NVMC_CONFIG, 0x02); + qtest_writel(qts, NRF51_NVMC_BASE + NRF51_NVMC_ERASEUICR, 0x01); + qtest_writel(qts, NRF51_NVMC_BASE + NRF51_NVMC_CONFIG, 0x00); + + for (i = 0; i < NRF51_UICR_SIZE / 4; i++) { + g_assert_cmpuint(qtest_readl(qts, NRF51_UICR_BASE + i * 4), + ==, 0xFFFFFFFF); + } + + qtest_writel(qts, NRF51_NVMC_BASE + NRF51_NVMC_CONFIG, 0x01); + for (i = 0; i < NRF51_UICR_SIZE / 4; i++) { + qtest_writel(qts, NRF51_UICR_BASE + i * 4, i); + g_assert_cmpuint(qtest_readl(qts, NRF51_UICR_BASE + i * 4), ==, i); + } + qtest_writel(qts, NRF51_NVMC_BASE + NRF51_NVMC_CONFIG, 0x00); + + qtest_writel(qts, NRF51_NVMC_BASE + NRF51_NVMC_CONFIG, 0x02); + qtest_writel(qts, NRF51_NVMC_BASE + NRF51_NVMC_ERASEUICR, 0x01); + qtest_writel(qts, NRF51_NVMC_BASE + NRF51_NVMC_CONFIG, 0x00); + + for (i = 0; i < NRF51_UICR_SIZE / 4; i++) { + g_assert_cmpuint(qtest_readl(qts, NRF51_UICR_BASE + i * 4), + ==, 0xFFFFFFFF); + } + + qtest_quit(qts); +} + static void test_nrf51_gpio(void) { size_t i; @@ -XXX,XX +XXX,XX @@ int main(int argc, char **argv) qtest_add_func("/microbit/nrf51/uart", test_nrf51_uart); qtest_add_func("/microbit/nrf51/gpio", test_nrf51_gpio); + qtest_add_func("/microbit/nrf51/nvmc", test_nrf51_nvmc); qtest_add_func("/microbit/nrf51/timer", test_nrf51_timer); qtest_add_func("/microbit/microbit/i2c", test_microbit_i2c); -- 2.20.1 Hi; here's another arm pullreq; main parts here are the new i.MX 8MM EVK board, and a lot of refactoring. thanks -- PMM The following changes since commit aa15257174da180c6a8a9d58f87319cfe61c5520: Merge tag 'pbouvier/pr/plugins-20260424' of https://gitlab.com/p-b-o/qemu into staging (2026-04-25 10:22:04 -0400) are available in the Git repository at: https://gitlab.com/pm215/qemu.git tags/pull-target-arm-20260427 for you to fetch changes up to 4575da5ecb7a27544aa6da1f78e700e8100ceaea: target/arm: report register in WFIT syndromes (2026-04-27 11:46:34 +0100) ---------------------------------------------------------------- target-arm queue: docs/system: add FEAT_AA32 and FEAT_AA64 to emulation list hw/arm: Add the i.MX 8MM EVK(Evaluation Kit) board target/arm: Build M-profile helper code once only hw/arm: Remove hw_error() for the unimplemented CM_LMBUSCNT register hw: Move ARM_SYSCTL_GPIO definitions to arm sysctl specific header target/arm: Allow 'aarch64=off' to be set for TCG CPUs target/arm: Allow some sysregs to not have to be an exact match for migration hw/arm/raspi4b: NOP all DTB nodes when removing unimplemented devices hw/arm/fsl-imx6ul: Implement LCDIF display device target/arm: Refactor syndrome value code to use registerfields target/arm: Report the register in WFxT syndromes ---------------------------------------------------------------- Alex Bennée (24): docs/system: add FEAT_AA32 and FEAT_AA64 to emulation list target/arm: migrate basic syndrome helpers to registerfields target/arm: migrate system/cp trap syndromes to registerfields target/arm: migrate FP/SIMD trap syndromes to registerfields target/arm: migrate eret trap syndromes to registerfields target/arm: migrate SME trap syndromes to registerfields target/arm: migrate PAC trap syndromes to registerfields target/arm: migrate BTI trap syndromes to registerfields target/arm: migrate BXJ trap syndromes to registerfields target/arm: migrate Granule Protection traps to registerfields target/arm: migrate fault syndromes to registerfields target/arm: migrate debug syndromes to registerfields target/arm: migrate wfx syndromes to registerfields target/arm: migrate gcs syndromes to registerfields target/arm: migrate memory op syndromes to registerfields target/arm: migrate check_hcr_el2_trap to use syndrome helper target/arm: use syndrome helpers in arm_cpu_do_interrupt_aarch32_hyp target/arm: use syndrome helpers to set SAME_EL EC bit target/arm: make whpx use syndrome helpers for decode target/arm: make hvf use syndrome helpers for decode target/arm: use syndrome helpers in merge_syn_data_abort target/arm: use syndrome helpers to query VNCR bit target/arm: remove old syndrome defines target/arm: report register in WFIT syndromes Eric Auger (7): target/arm/cpu: Introduce the infrastructure for cpreg migration tolerances target/arm/machine: Handle ToleranceNotOnBothEnds migration tolerances target/arm/machine: Handle ToleranceOnlySrcTestValue migration tolerance target/arm/cpu64: Mitigate migration failures due to spurious TCR_EL1, PIRE0_EL1 and PIR_EL1 target/arm/cpu64: Define cpreg migration tolerance for KVM_REG_ARM_VENDOR_HYP_BMAP_2 target/arm/helper: Define cpreg migration tolerance for DGBDTR_EL0 Revert "target/arm: Reinstate bogus AArch32 DBGDTRTX register for migration compat" Gaurav Sharma (15): hw/arm: Add the i.MX 8MM EVK(Evaluation Kit) board hw/misc/imx8mp_analog: Add property to analog device hw/arm/fsl-imx8mm: Add Analog device IP to iMX8MM SOC hw/arm/fsl-imx8mm: Add Clock Control Module IP to iMX8MM hw/arm/fsl-imx8mm: Implemented support for SNVS hw/arm/fsl-imx8mm: Adding support for USDHC storage controllers hw/arm/fsl-imx8mm: Add PCIe support hw/arm/fsl-imx8mm: Add GPIO controllers hw/arm/fsl-imx8mm: Adding support for I2C emulation hw/arm/fsl-imx8mm: Adding support for SPI controller hw/arm/fsl-imx8mm: Adding support for Watchdog Timers hw/arm/fsl-imx8mm: Adding support for General Purpose Timers hw/arm/fsl-imx8mm: Adding support for ENET ethernet controller hw/arm/fsl-imx8mm: Adding support for USB controller hw/arm/fsl-imx8mm: Adding functional testing of iMX8MM emulation Osama Abdelkader (1): hw/arm/raspi4b: NOP all DTB nodes when removing unimplemented devices Peter Maydell (4): hw: Move ARM_SYSCTL_GPIO definitions to arm sysctl specific header target/arm: Clear AArch64 ID regs from ARMISARegisters if AArch64 disabled target/arm: Allow 'aarch64=off' to be set for TCG CPUs tests/functional/aarch64: Add basic test of TCG aarch64=off Philippe Mathieu-Daudé (9): target/arm: Ignore endianness when setting MTE tags target/arm: Explode MO_TExx -> MO_TE | MO_xx target/arm: Hoist MO_TE into mve_advance_vpt() target/arm: Hoist MO_TE into MVE DO_VSTR() macro target/arm: Introduce mo_endian() helper target/arm: Replace MO_TE -> mo_endian() for MVE helpers target/arm: Compile mve_helper.c once target/arm: Replace MO_TE -> mo_endian() for Cortex-M helpers target/arm: Compile m_helper.c once Thomas Huth (1): hw/arm: Remove hw_error() for the unimplemented CM_LMBUSCNT register Yucai Liu (2): hw/display: Add i.MX6UL LCDIF device model hw/arm/fsl-imx6ul: Wire in the LCDIF device model MAINTAINERS | 16 +- docs/system/arm/cpu-features.rst | 10 +- docs/system/arm/emulation.rst | 2 + docs/system/arm/{imx8mp-evk.rst => imx8m.rst} | 49 +- docs/system/target-arm.rst | 2 +- hw/arm/Kconfig | 25 + hw/arm/fsl-imx6ul.c | 12 +- hw/arm/fsl-imx8mm.c | 704 ++++++++++++++++++++++ hw/arm/imx8mm-evk.c | 130 ++++ hw/arm/integratorcp.c | 3 - hw/arm/meson.build | 2 + hw/arm/raspi4b.c | 10 +- hw/arm/realview.c | 2 +- hw/arm/vexpress.c | 2 +- hw/arm/virt.c | 1 - hw/display/Kconfig | 4 + hw/display/imx6ul_lcdif.c | 453 ++++++++++++++ hw/display/meson.build | 1 + hw/misc/arm_sysctl.c | 2 +- hw/misc/imx8mp_analog.c | 12 +- hw/timer/imx_gpt.c | 26 + hw/vmapple/vmapple.c | 1 - include/hw/arm/fsl-imx6ul.h | 4 +- include/hw/arm/fsl-imx8mm.h | 242 ++++++++ include/hw/arm/primecell.h | 12 - include/hw/display/imx6ul_lcdif.h | 37 ++ include/hw/misc/arm_sysctl.h | 16 + include/hw/misc/imx8mp_analog.h | 3 + include/hw/timer/imx_gpt.h | 2 + target/arm/cpu-features.h | 5 + target/arm/cpu.c | 153 ++++- target/arm/cpu.h | 4 +- target/arm/cpu64.c | 39 ++ target/arm/debug_helper.c | 29 - target/arm/helper.c | 27 +- target/arm/hvf/hvf.c | 14 +- target/arm/internals.h | 60 ++ target/arm/machine.c | 33 +- target/arm/syndrome.h | 595 ++++++++++++++---- target/arm/tcg/debug.c | 2 +- target/arm/tcg/helper-a64.c | 2 +- target/arm/tcg/helper-defs.h | 2 +- target/arm/tcg/m_helper.c | 8 +- target/arm/tcg/meson.build | 6 +- target/arm/tcg/mve_helper.c | 102 ++-- target/arm/tcg/op_helper.c | 7 +- target/arm/tcg/tlb_helper.c | 6 +- target/arm/tcg/translate-a64.c | 2 +- target/arm/tcg/vfp_helper.c | 5 +- target/arm/trace-events | 2 + target/arm/whpx/whpx-all.c | 13 +- tests/functional/aarch64/meson.build | 3 + tests/functional/aarch64/test_imx8mm_evk.py | 69 +++ tests/functional/aarch64/test_virt_aarch64_off.py | 37 ++ tests/qtest/arm-cpu-features.c | 8 +- 55 files changed, 2743 insertions(+), 275 deletions(-) rename docs/system/arm/{imx8mp-evk.rst => imx8m.rst} (58%) create mode 100644 hw/arm/fsl-imx8mm.c create mode 100644 hw/arm/imx8mm-evk.c create mode 100644 hw/display/imx6ul_lcdif.c create mode 100644 include/hw/arm/fsl-imx8mm.h delete mode 100644 include/hw/arm/primecell.h create mode 100644 include/hw/display/imx6ul_lcdif.h create mode 100644 include/hw/misc/arm_sysctl.h create mode 100755 tests/functional/aarch64/test_imx8mm_evk.py create mode 100755 tests/functional/aarch64/test_virt_aarch64_off.py From: Alex Bennée <alex.bennee@linaro.org> This is just a documentation tweak as we already support both. FEAT_AA32 implies FEAT_AA32EL0. FEAT_AA64 implies FEAT_AA64EL[0123]. This is however useful if you are using emulation.rst as a source of truth of what QEMU emulates and when cross checking with Features.json from Arm. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260421093506.616307-1-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 2 ++ 1 file changed, 2 insertions(+) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ QEMU's TCG emulation includes support for the Armv5, Armv6, Armv7, Armv8 and Armv9 versions of the A-profile architecture. It also has support for the following architecture extensions: +- FEAT_AA32 (PE Support for AArch32) - FEAT_AA32BF16 (AArch32 BFloat16 instructions) - FEAT_AA32EL0 (Support for AArch32 at EL0) - FEAT_AA32EL1 (Support for AArch32 at EL1) @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_AA32EL3 (Support for AArch32 at EL3) - FEAT_AA32HPD (AArch32 hierarchical permission disables) - FEAT_AA32I8MM (AArch32 Int8 matrix multiplication instructions) +- FEAT_AA64 (PE uses AArch64 after last reboot) - FEAT_AA64EL0 (Support for AArch64 at EL0) - FEAT_AA64EL1 (Support for AArch64 at EL1) - FEAT_AA64EL2 (Support for AArch64 at EL2) -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> Implemented CPUs, RAM, UARTs and Interrupt Controller Other peripherals are represented as TYPE_UNIMPLEMENTED_DEVICE Complete memory map of the SoC is provided. Set default RAM size to 2GB and default CPU count to 4 to match the real i.MX8MM EVK hardware configuration. Documentation is shared with imx8mp-evk to avoid duplication. Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> [PMM: fixed over-long lines in doc] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 11 +- docs/system/arm/{imx8mp-evk.rst => imx8m.rst} | 49 ++- docs/system/target-arm.rst | 2 +- hw/arm/Kconfig | 12 + hw/arm/fsl-imx8mm.c | 377 ++++++++++++++++++ hw/arm/imx8mm-evk.c | 112 ++++++ hw/arm/meson.build | 2 + include/hw/arm/fsl-imx8mm.h | 158 ++++++++ 8 files changed, 709 insertions(+), 14 deletions(-) rename docs/system/arm/{imx8mp-evk.rst => imx8m.rst} (58%) create mode 100644 hw/arm/fsl-imx8mm.c create mode 100644 hw/arm/imx8mm-evk.c create mode 100644 include/hw/arm/fsl-imx8mm.h diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/pci-host/designware.c F: include/hw/pci-host/designware.h F: docs/system/arm/mcimx7d-sabre.rst +MCIMX8MM-EVK / iMX8MM +M: Gaurav Sharma <gaurav.sharma_7@nxp.com> +L: qemu-arm@nongnu.org +S: Maintained +F: hw/arm/fsl-imx8mm.c +F: hw/arm/imx8mm-evk.c +F: include/hw/arm/fsl-imx8mm.h +F: docs/system/arm/imx8m.rst + MCIMX8MP-EVK / i.MX8MP M: Bernhard Beschow <shentey@gmail.com> L: qemu-arm@nongnu.org @@ -XXX,XX +XXX,XX @@ F: hw/rtc/rs5c372.c F: include/hw/arm/fsl-imx8mp.h F: include/hw/misc/imx8mp_*.h F: include/hw/pci-host/fsl_imx8m_phy.h -F: docs/system/arm/imx8mp-evk.rst +F: docs/system/arm/imx8m.rst F: tests/functional/aarch64/test_imx8mp_evk.py F: tests/qtest/rs5c372-test.c diff --git a/docs/system/arm/imx8mp-evk.rst b/docs/system/arm/imx8m.rst similarity index 58% rename from docs/system/arm/imx8mp-evk.rst rename to docs/system/arm/imx8m.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/imx8mp-evk.rst +++ b/docs/system/arm/imx8m.rst @@ -XXX,XX +XXX,XX @@ -NXP i.MX 8M Plus Evaluation Kit (``imx8mp-evk``) -================================================ +NXP i.MX 8M Plus and i.MX 8M Mini Evaluation Kits (``imx8mp-evk``, ``imx8mm-evk``) +================================================================================== -The ``imx8mp-evk`` machine models the i.MX 8M Plus Evaluation Kit, based on an -i.MX 8M Plus SoC. +The ``imx8mp-evk`` and ``imx8mm-evk`` machine models the i.MX 8M Plus +and i.MX 8M Mini Evaluation Kits, based on i.MX 8M Plus and i.MX8M +Mini SoCs. Supported devices ----------------- -The ``imx8mp-evk`` machine implements the following devices: +The ``imx8mp-evk`` and ``imx8mm-evk`` machines implement the +following devices: * Up to 4 Cortex-A53 cores * Generic Interrupt Controller (GICv3) @@ -XXX,XX +XXX,XX @@ The ``imx8mp-evk`` machine implements the following devices: Boot options ------------ -The ``imx8mp-evk`` machine can start a Linux kernel directly using the standard -``-kernel`` functionality. +The ``imx8mp-evk`` and ``imx8mm-evk`` machines can start a Linux +kernel directly using the standard ``-kernel`` functionality. Direct Linux Kernel Boot '''''''''''''''''''''''' @@ -XXX,XX +XXX,XX @@ is to generate an image with Buildroot. Version 2024.11.1 is tested at the time of writing and involves two steps. First run the following commands in the toplevel directory of the Buildroot source tree: +For i.MX 8M Plus EVK: + .. code-block:: bash $ make freescale_imx8mpevk_defconfig $ make +For i.MX 8M Mini EVK: + +.. code-block:: bash + + $ make freescale_imx8mmevk_defconfig + $ make + Once finished successfully there is an ``output/image`` subfolder. Navigate into it and resize the SD card image to a power of two: @@ -XXX,XX +XXX,XX @@ it and resize the SD card image to a power of two: Now that everything is prepared the machine can be started as follows: +For i.MX 8M Plus EVK: + .. code-block:: bash $ qemu-system-aarch64 -M imx8mp-evk \ @@ -XXX,XX +XXX,XX @@ Now that everything is prepared the machine can be started as follows: -append "root=/dev/mmcblk2p2" \ -drive file=sdcard.img,if=sd,bus=2,format=raw,id=mmcblk2 +For i.MX 8M Mini EVK: + +.. code-block:: bash + + $ qemu-system-aarch64 -M imx8mm-evk -smp 4 -m 2G \ + -display none -serial null -serial stdio \ + -kernel Image \ + -dtb imx8mm-evk.dtb \ + -append "root=/dev/mmcblk2p2" \ + -drive file=sdcard.img,if=sd,bus=2,format=raw,id=mmcblk2 KVM Acceleration ---------------- @@ -XXX,XX +XXX,XX @@ To enable hardware-assisted acceleration via KVM, append ``-accel kvm`` to the command line. While this speeds up performance significantly, be aware of the following limitations: -* The ``imx8mp-evk`` machine is not included under the "virtualization use case" - of :doc:`QEMU's security policy </system/security>`. This means that you - should not trust that it can contain malicious guests, whether it is run - using TCG or KVM. If you don't trust your guests and you're relying on QEMU to - be the security boundary, you want to choose another machine such as ``virt``. +* The ``imx8mp-evk`` and ``imx8mm-evk`` machines are not included + under the "virtualization use case" of :doc:`QEMU's security + policy </system/security>`. This means that you should not trust that + it can contain malicious guests, whether it is run using TCG or KVM. + If you don't trust your guests and you're relying on QEMU to be the + security boundary, you want to choose another machine such as + ``virt``. * Rather than Cortex-A53 CPUs, the same CPU type as the host's will be used. This is a limitation of KVM and may not work with guests with a tight dependency on Cortex-A53. diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/target-arm.rst +++ b/docs/system/target-arm.rst @@ -XXX,XX +XXX,XX @@ Board-specific documentation arm/imx25-pdk arm/mcimx6ul-evk arm/mcimx7d-sabre - arm/imx8mp-evk + arm/imx8m arm/orangepi arm/raspi arm/collie diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MP_EVK depends on TCG select FSL_IMX8MP +config FSL_IMX8MM + bool + select ARM_GIC + select IMX + +config FSL_IMX8MM_EVK + bool + default y + depends on AARCH64 + depends on TCG + select FSL_IMX8MM + config ARM_SMMUV3_ACCEL bool depends on ARM_SMMUV3 diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ +/* + * i.MX 8MM SoC Implementation + * + * Based on hw/arm/fsl-imx6.c + * + * Copyright (c) 2025, NXP Semiconductors + * Author: Gaurav Sharma <gaurav.sharma_7@nxp.com> + * + * SPDX-License-Identifier: GPL-2.0-or-later + * + * iMX8MM Reference Manual - https://www.nxp.com/products/i.MX8MMINI -> Documentation + */ + +#include "qemu/osdep.h" +#include "system/address-spaces.h" +#include "hw/arm/bsa.h" +#include "hw/arm/fsl-imx8mm.h" +#include "hw/misc/unimp.h" +#include "hw/core/boards.h" +#include "system/kvm.h" +#include "system/system.h" +#include "target/arm/cpu.h" +#include "target/arm/cpu-qom.h" +#include "target/arm/kvm_arm.h" +#include "qapi/error.h" +#include "qobject/qlist.h" + +static const struct { + hwaddr addr; + size_t size; + const char *name; +} fsl_imx8mm_memmap[] = { + [FSL_IMX8MM_RAM] = { FSL_IMX8MM_RAM_START, FSL_IMX8MM_RAM_SIZE_MAX, "ram" }, + [FSL_IMX8MM_DDR_PHY_BROADCAST] = { 0x3dc00000, 4 * MiB, "ddr_phy_broadcast" }, + [FSL_IMX8MM_DDR_PERF_MON] = { 0x3d800000, 4 * MiB, "ddr_perf_mon" }, + [FSL_IMX8MM_DDR_CTL] = { 0x3d400000, 4 * MiB, "ddr_ctl" }, + [FSL_IMX8MM_DDR_PHY] = { 0x3c000000, 16 * MiB, "ddr_phy" }, + [FSL_IMX8MM_GIC_DIST] = { 0x38800000, 512 * KiB, "gic_dist" }, + [FSL_IMX8MM_GIC_REDIST] = { 0x38880000, 512 * KiB, "gic_redist" }, + [FSL_IMX8MM_VPU] = { 0x38340000, 2 * MiB, "vpu" }, + [FSL_IMX8MM_VPU_BLK_CTRL] = { 0x38330000, 2 * MiB, "vpu_blk_ctrl" }, + [FSL_IMX8MM_VPU_G2_DECODER] = { 0x38310000, 1 * MiB, "vpu_g2_decoder" }, + [FSL_IMX8MM_VPU_G1_DECODER] = { 0x38300000, 1 * MiB, "vpu_g1_decoder" }, + [FSL_IMX8MM_USB2_OTG] = { 0x32e50200, 0x200, "usb2_otg" }, + [FSL_IMX8MM_USB2] = { 0x32e50000, 0x200, "usb2" }, + [FSL_IMX8MM_USB1_OTG] = { 0x32e40200, 0x200, "usb1_otg" }, + [FSL_IMX8MM_USB1] = { 0x32e40000, 0x200, "usb1" }, + [FSL_IMX8MM_GPU2D] = { 0x38000000, 64 * KiB, "gpu2d" }, + [FSL_IMX8MM_QSPI1_RX_BUFFER] = { 0x34000000, 32 * MiB, "qspi1_rx_buffer" }, + [FSL_IMX8MM_PCIE1] = { 0x33800000, 4 * MiB, "pcie1" }, + [FSL_IMX8MM_QSPI1_TX_BUFFER] = { 0x33008000, 32 * KiB, "qspi1_tx_buffer" }, + [FSL_IMX8MM_APBH_DMA] = { 0x33000000, 32 * KiB, "apbh_dma" }, + + /* AIPS-4 Begin */ + [FSL_IMX8MM_TZASC] = { 0x32f80000, 64 * KiB, "tzasc" }, + [FSL_IMX8MM_PCIE_PHY1] = { 0x32f00000, 64 * KiB, "pcie_phy1" }, + [FSL_IMX8MM_MEDIA_BLK_CTL] = { 0x32e28000, 256, "media_blk_ctl" }, + [FSL_IMX8MM_LCDIF] = { 0x32e00000, 64 * KiB, "lcdif" }, + [FSL_IMX8MM_MIPI_DSI] = { 0x32e10000, 64 * KiB, "mipi_dsi" }, + [FSL_IMX8MM_MIPI_CSI] = { 0x32e30000, 64 * KiB, "mipi_csi" }, + [FSL_IMX8MM_AIPS4_CONFIGURATION] = { 0x32df0000, 64 * KiB, "aips4_configuration" }, + /* AIPS-4 End */ + + [FSL_IMX8MM_INTERCONNECT] = { 0x32700000, 1 * MiB, "interconnect" }, + + /* AIPS-3 Begin */ + [FSL_IMX8MM_ENET1] = { 0x30be0000, 64 * KiB, "enet1" }, + [FSL_IMX8MM_SDMA1] = { 0x30bd0000, 64 * KiB, "sdma1" }, + [FSL_IMX8MM_QSPI] = { 0x30bb0000, 64 * KiB, "qspi" }, + [FSL_IMX8MM_USDHC3] = { 0x30b60000, 64 * KiB, "usdhc3" }, + [FSL_IMX8MM_USDHC2] = { 0x30b50000, 64 * KiB, "usdhc2" }, + [FSL_IMX8MM_USDHC1] = { 0x30b40000, 64 * KiB, "usdhc1" }, + [FSL_IMX8MM_SEMAPHORE_HS] = { 0x30ac0000, 64 * KiB, "semaphore_hs" }, + [FSL_IMX8MM_MU_B] = { 0x30ab0000, 64 * KiB, "mu_b" }, + [FSL_IMX8MM_MU_A] = { 0x30aa0000, 64 * KiB, "mu_a" }, + [FSL_IMX8MM_UART4] = { 0x30a60000, 64 * KiB, "uart4" }, + [FSL_IMX8MM_I2C4] = { 0x30a50000, 64 * KiB, "i2c4" }, + [FSL_IMX8MM_I2C3] = { 0x30a40000, 64 * KiB, "i2c3" }, + [FSL_IMX8MM_I2C2] = { 0x30a30000, 64 * KiB, "i2c2" }, + [FSL_IMX8MM_I2C1] = { 0x30a20000, 64 * KiB, "i2c1" }, + [FSL_IMX8MM_AIPS3_CONFIGURATION] = { 0x309f0000, 64 * KiB, "aips3_configuration" }, + [FSL_IMX8MM_CAAM] = { 0x30900000, 256 * KiB, "caam" }, + [FSL_IMX8MM_SPBA1] = { 0x308f0000, 64 * KiB, "spba1" }, + [FSL_IMX8MM_UART2] = { 0x30890000, 64 * KiB, "uart2" }, + [FSL_IMX8MM_UART3] = { 0x30880000, 64 * KiB, "uart3" }, + [FSL_IMX8MM_UART1] = { 0x30860000, 64 * KiB, "uart1" }, + [FSL_IMX8MM_ECSPI3] = { 0x30840000, 64 * KiB, "ecspi3" }, + [FSL_IMX8MM_ECSPI2] = { 0x30830000, 64 * KiB, "ecspi2" }, + [FSL_IMX8MM_ECSPI1] = { 0x30820000, 64 * KiB, "ecspi1" }, + /* AIPS-3 End */ + + /* AIPS-2 Begin */ + [FSL_IMX8MM_QOSC] = { 0x307f0000, 64 * KiB, "qosc" }, + [FSL_IMX8MM_PERFMON2] = { 0x307d0000, 64 * KiB, "perfmon2" }, + [FSL_IMX8MM_PERFMON1] = { 0x307c0000, 64 * KiB, "perfmon1" }, + [FSL_IMX8MM_GPT4] = { 0x30700000, 64 * KiB, "gpt4" }, + [FSL_IMX8MM_GPT5] = { 0x306f0000, 64 * KiB, "gpt5" }, + [FSL_IMX8MM_GPT6] = { 0x306e0000, 64 * KiB, "gpt6" }, + [FSL_IMX8MM_SYSCNT_CTRL] = { 0x306c0000, 64 * KiB, "syscnt_ctrl" }, + [FSL_IMX8MM_SYSCNT_CMP] = { 0x306b0000, 64 * KiB, "syscnt_cmp" }, + [FSL_IMX8MM_SYSCNT_RD] = { 0x306a0000, 64 * KiB, "syscnt_rd" }, + [FSL_IMX8MM_PWM4] = { 0x30690000, 64 * KiB, "pwm4" }, + [FSL_IMX8MM_PWM3] = { 0x30680000, 64 * KiB, "pwm3" }, + [FSL_IMX8MM_PWM2] = { 0x30670000, 64 * KiB, "pwm2" }, + [FSL_IMX8MM_PWM1] = { 0x30660000, 64 * KiB, "pwm1" }, + [FSL_IMX8MM_AIPS2_CONFIGURATION] = { 0x305f0000, 64 * KiB, "aips2_configuration" }, + /* AIPS-2 End */ + + /* AIPS-1 Begin */ + [FSL_IMX8MM_CSU] = { 0x303e0000, 64 * KiB, "csu" }, + [FSL_IMX8MM_RDC] = { 0x303d0000, 64 * KiB, "rdc" }, + [FSL_IMX8MM_SEMAPHORE2] = { 0x303c0000, 64 * KiB, "semaphore2" }, + [FSL_IMX8MM_SEMAPHORE1] = { 0x303b0000, 64 * KiB, "semaphore1" }, + [FSL_IMX8MM_GPC] = { 0x303a0000, 64 * KiB, "gpc" }, + [FSL_IMX8MM_SRC] = { 0x30390000, 64 * KiB, "src" }, + [FSL_IMX8MM_CCM] = { 0x30380000, 64 * KiB, "ccm" }, + [FSL_IMX8MM_SNVS_HP] = { 0x30370000, 64 * KiB, "snvs_hp" }, + [FSL_IMX8MM_ANA_PLL] = { 0x30360000, 64 * KiB, "ana_pll" }, + [FSL_IMX8MM_OCOTP_CTRL] = { 0x30350000, 64 * KiB, "ocotp_ctrl" }, + [FSL_IMX8MM_IOMUXC_GPR] = { 0x30340000, 64 * KiB, "iomuxc_gpr" }, + [FSL_IMX8MM_IOMUXC] = { 0x30330000, 64 * KiB, "iomuxc" }, + [FSL_IMX8MM_GPT3] = { 0x302f0000, 64 * KiB, "gpt3" }, + [FSL_IMX8MM_GPT2] = { 0x302e0000, 64 * KiB, "gpt2" }, + [FSL_IMX8MM_GPT1] = { 0x302d0000, 64 * KiB, "gpt1" }, + [FSL_IMX8MM_SDMA2] = { 0x302c0000, 64 * KiB, "sdma2" }, + [FSL_IMX8MM_SDMA3] = { 0x302b0000, 64 * KiB, "sdma3" }, + [FSL_IMX8MM_WDOG3] = { 0x302a0000, 64 * KiB, "wdog3" }, + [FSL_IMX8MM_WDOG2] = { 0x30290000, 64 * KiB, "wdog2" }, + [FSL_IMX8MM_WDOG1] = { 0x30280000, 64 * KiB, "wdog1" }, + [FSL_IMX8MM_ANA_OSC] = { 0x30270000, 64 * KiB, "ana_osc" }, + [FSL_IMX8MM_ANA_TSENSOR] = { 0x30260000, 64 * KiB, "ana_tsensor" }, + [FSL_IMX8MM_GPIO5] = { 0x30240000, 64 * KiB, "gpio5" }, + [FSL_IMX8MM_GPIO4] = { 0x30230000, 64 * KiB, "gpio4" }, + [FSL_IMX8MM_GPIO3] = { 0x30220000, 64 * KiB, "gpio3" }, + [FSL_IMX8MM_GPIO2] = { 0x30210000, 64 * KiB, "gpio2" }, + [FSL_IMX8MM_GPIO1] = { 0x30200000, 64 * KiB, "gpio1" }, + [FSL_IMX8MM_AIPS1_CONFIGURATION] = { 0x301f0000, 64 * KiB, "aips1_configuration" }, + [FSL_IMX8MM_SAI6] = { 0x30060000, 64 * KiB, "sai6" }, + [FSL_IMX8MM_SAI5] = { 0x30050000, 64 * KiB, "sai5" }, + [FSL_IMX8MM_SAI3] = { 0x30030000, 64 * KiB, "sai3" }, + [FSL_IMX8MM_SAI2] = { 0x30020000, 64 * KiB, "sai2" }, + [FSL_IMX8MM_SAI1] = { 0x30010000, 64 * KiB, "sai1" }, + + /* AIPS-1 End */ + + [FSL_IMX8MM_A53_DAP] = { 0x28000000, 16 * MiB, "a53_dap" }, + [FSL_IMX8MM_PCIE1_MEM] = { 0x18000000, 128 * MiB, "pcie1_mem" }, + [FSL_IMX8MM_QSPI_MEM] = { 0x08000000, 256 * MiB, "qspi_mem" }, + [FSL_IMX8MM_OCRAM] = { 0x00900000, 256 * KiB, "ocram" }, + [FSL_IMX8MM_TCM_DTCM] = { 0x00800000, 128 * KiB, "tcm_dtcm" }, + [FSL_IMX8MM_TCM_ITCM] = { 0x007e0000, 128 * KiB, "tcm_itcm" }, + [FSL_IMX8MM_OCRAM_S] = { 0x00180000, 32 * KiB, "ocram_s" }, + [FSL_IMX8MM_CAAM_MEM] = { 0x00100000, 32 * KiB, "caam_mem" }, + [FSL_IMX8MM_BOOT_ROM_PROTECTED] = { 0x0003f000, 4 * KiB, "boot_rom_protected" }, + [FSL_IMX8MM_BOOT_ROM] = { 0x00000000, 252 * KiB, "boot_rom" }, +}; + +static void fsl_imx8mm_init(Object *obj) +{ + MachineState *ms = MACHINE(qdev_get_machine()); + FslImx8mmState *s = FSL_IMX8MM(obj); + const char *cpu_type = ms->cpu_type ?: ARM_CPU_TYPE_NAME("cortex-a53"); + int i; + + for (i = 0; i < MIN(ms->smp.cpus, FSL_IMX8MM_NUM_CPUS); i++) { + g_autofree char *name = g_strdup_printf("cpu%d", i); + object_initialize_child(obj, name, &s->cpu[i], cpu_type); + } + + object_initialize_child(obj, "gic", &s->gic, gicv3_class_name()); + + for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) { + g_autofree char *name = g_strdup_printf("uart%d", i + 1); + object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); + } + +} + +static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) +{ + MachineState *ms = MACHINE(qdev_get_machine()); + FslImx8mmState *s = FSL_IMX8MM(dev); + DeviceState *gicdev = DEVICE(&s->gic); + int i; + + if (ms->smp.cpus > FSL_IMX8MM_NUM_CPUS) { + error_setg(errp, "%s: Only %d CPUs are supported (%d requested)", + TYPE_FSL_IMX8MM, FSL_IMX8MM_NUM_CPUS, ms->smp.cpus); + return; + } + + /* CPUs */ + for (i = 0; i < ms->smp.cpus; i++) { + /* On uniprocessor, the CBAR is set to 0 */ + if (ms->smp.cpus > 1 && + object_property_find(OBJECT(&s->cpu[i]), "reset-cbar")) { + object_property_set_int(OBJECT(&s->cpu[i]), "reset-cbar", + fsl_imx8mm_memmap[FSL_IMX8MM_GIC_DIST].addr, + &error_abort); + } + + /* + * CNTFID0 base frequency in Hz of system counter + */ + object_property_set_int(OBJECT(&s->cpu[i]), "cntfrq", 8000000, + &error_abort); + + if (object_property_find(OBJECT(&s->cpu[i]), "has_el2")) { + object_property_set_bool(OBJECT(&s->cpu[i]), "has_el2", + !kvm_enabled(), &error_abort); + } + + if (object_property_find(OBJECT(&s->cpu[i]), "has_el3")) { + object_property_set_bool(OBJECT(&s->cpu[i]), "has_el3", + !kvm_enabled(), &error_abort); + } + + if (i) { + /* + * Secondary CPUs start in powered-down state (and can be + * powered up via the SRC system reset controller) + */ + object_property_set_bool(OBJECT(&s->cpu[i]), "start-powered-off", + true, &error_abort); + } + + if (!qdev_realize(DEVICE(&s->cpu[i]), NULL, errp)) { + return; + } + } + + /* GIC */ + { + SysBusDevice *gicsbd = SYS_BUS_DEVICE(&s->gic); + QList *redist_region_count; + bool pmu = object_property_get_bool(OBJECT(first_cpu), "pmu", NULL); + + qdev_prop_set_uint32(gicdev, "num-cpu", ms->smp.cpus); + qdev_prop_set_uint32(gicdev, "num-irq", + FSL_IMX8MM_NUM_IRQS + GIC_INTERNAL); + redist_region_count = qlist_new(); + qlist_append_int(redist_region_count, ms->smp.cpus); + qdev_prop_set_array(gicdev, "redist-region-count", redist_region_count); + object_property_set_link(OBJECT(&s->gic), "sysmem", + OBJECT(get_system_memory()), &error_fatal); + if (!sysbus_realize(gicsbd, errp)) { + return; + } + sysbus_mmio_map(gicsbd, 0, fsl_imx8mm_memmap[FSL_IMX8MM_GIC_DIST].addr); + sysbus_mmio_map(gicsbd, 1, fsl_imx8mm_memmap[FSL_IMX8MM_GIC_REDIST].addr); + + /* + * Wire the outputs from each CPU's generic timer and the GICv3 + * maintenance interrupt signal to the appropriate GIC PPI inputs, and + * the GIC's IRQ/FIQ interrupt outputs to the CPU's inputs. + */ + for (i = 0; i < ms->smp.cpus; i++) { + DeviceState *cpudev = DEVICE(&s->cpu[i]); + int intidbase = FSL_IMX8MM_NUM_IRQS + i * GIC_INTERNAL; + qemu_irq irq; + + /* + * Mapping from the output timer irq lines from the CPU to the + * GIC PPI inputs. + */ + static const int timer_irqs[] = { + [GTIMER_PHYS] = ARCH_TIMER_NS_EL1_IRQ, + [GTIMER_VIRT] = ARCH_TIMER_VIRT_IRQ, + [GTIMER_HYP] = ARCH_TIMER_NS_EL2_IRQ, + [GTIMER_SEC] = ARCH_TIMER_S_EL1_IRQ, + }; + + for (int j = 0; j < ARRAY_SIZE(timer_irqs); j++) { + irq = qdev_get_gpio_in(gicdev, intidbase + timer_irqs[j]); + qdev_connect_gpio_out(cpudev, j, irq); + } + + irq = qdev_get_gpio_in(gicdev, intidbase + ARCH_GIC_MAINT_IRQ); + qdev_connect_gpio_out_named(cpudev, "gicv3-maintenance-interrupt", + 0, irq); + + irq = qdev_get_gpio_in(gicdev, intidbase + VIRTUAL_PMU_IRQ); + qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0, irq); + + sysbus_connect_irq(gicsbd, i, + qdev_get_gpio_in(cpudev, ARM_CPU_IRQ)); + sysbus_connect_irq(gicsbd, i + ms->smp.cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_FIQ)); + sysbus_connect_irq(gicsbd, i + 2 * ms->smp.cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_VIRQ)); + sysbus_connect_irq(gicsbd, i + 3 * ms->smp.cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ)); + + if (kvm_enabled()) { + if (pmu) { + assert(arm_feature(&s->cpu[i].env, ARM_FEATURE_PMU)); + if (kvm_irqchip_in_kernel()) { + kvm_arm_pmu_set_irq(&s->cpu[i], VIRTUAL_PMU_IRQ); + } + kvm_arm_pmu_init(&s->cpu[i]); + } + } + } + } + + /* UARTs */ + for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) { + static const struct { + hwaddr addr; + unsigned int irq; + } serial_table[FSL_IMX8MM_NUM_UARTS] = { + { fsl_imx8mm_memmap[FSL_IMX8MM_UART1].addr, FSL_IMX8MM_UART1_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_UART2].addr, FSL_IMX8MM_UART2_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_UART3].addr, FSL_IMX8MM_UART3_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_UART4].addr, FSL_IMX8MM_UART4_IRQ }, + }; + + qdev_prop_set_chr(DEVICE(&s->uart[i]), "chardev", serial_hd(i)); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->uart[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->uart[i]), 0, serial_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->uart[i]), 0, + qdev_get_gpio_in(gicdev, serial_table[i].irq)); + } + + /* On-Chip RAM */ + if (!memory_region_init_ram(&s->ocram, OBJECT(dev), "imx8mm.ocram", + fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].size, + errp)) { + return; + } + memory_region_add_subregion(get_system_memory(), + fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr, + &s->ocram); + + /* Unimplemented devices */ + for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) { + switch (i) { + case FSL_IMX8MM_GIC_DIST: + case FSL_IMX8MM_GIC_REDIST: + case FSL_IMX8MM_RAM: + case FSL_IMX8MM_OCRAM: + case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4: + /* device implemented and treated above */ + break; + + default: + create_unimplemented_device(fsl_imx8mm_memmap[i].name, + fsl_imx8mm_memmap[i].addr, + fsl_imx8mm_memmap[i].size); + break; + } + } +} + +static void fsl_imx8mm_class_init(ObjectClass *oc, const void *data) +{ + DeviceClass *dc = DEVICE_CLASS(oc); + + dc->realize = fsl_imx8mm_realize; + + dc->desc = "i.MX 8MM SoC"; +} + +static const TypeInfo fsl_imx8mm_types[] = { + { + .name = TYPE_FSL_IMX8MM, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(FslImx8mmState), + .instance_init = fsl_imx8mm_init, + .class_init = fsl_imx8mm_class_init, + }, +}; + +DEFINE_TYPES(fsl_imx8mm_types) diff --git a/hw/arm/imx8mm-evk.c b/hw/arm/imx8mm-evk.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/imx8mm-evk.c @@ -XXX,XX +XXX,XX @@ +/* + * NXP i.MX 8MM Evaluation Kit System Emulation + * + * Copyright (c) 2025, NXP Semiconductors + * Author: Gaurav Sharma <gaurav.sharma_7@nxp.com> + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#include "qemu/osdep.h" +#include "system/address-spaces.h" +#include "hw/arm/boot.h" +#include "hw/arm/fsl-imx8mm.h" +#include "hw/arm/machines-qom.h" +#include "hw/core/boards.h" +#include "hw/core/qdev-properties.h" +#include "system/kvm.h" +#include "system/qtest.h" +#include "qemu/error-report.h" +#include "qapi/error.h" +#include <libfdt.h> + +static void imx8mm_evk_modify_dtb(const struct arm_boot_info *info, void *fdt) +{ + int i, offset; + + /* Temporarily disable following nodes until they are implemented */ + const char *nodes_to_remove[] = { + "nxp,imx8mm-fspi", + "fsl,imx8mm-mipi-csi", + "fsl,imx8mm-mipi-dsim" + }; + + for (i = 0; i < ARRAY_SIZE(nodes_to_remove); i++) { + const char *dev_str = nodes_to_remove[i]; + + offset = fdt_node_offset_by_compatible(fdt, -1, dev_str); + while (offset >= 0) { + fdt_nop_node(fdt, offset); + offset = fdt_node_offset_by_compatible(fdt, offset, dev_str); + } + } + + /* Remove cpu-idle-states property from CPU nodes */ + offset = fdt_node_offset_by_compatible(fdt, -1, "arm,cortex-a53"); + while (offset >= 0) { + fdt_nop_property(fdt, offset, "cpu-idle-states"); + offset = fdt_node_offset_by_compatible(fdt, offset, "arm,cortex-a53"); + } + + if (kvm_enabled()) { + /* Use system counter frequency from host CPU to fix time in guest */ + offset = fdt_node_offset_by_compatible(fdt, -1, "arm,armv8-timer"); + while (offset >= 0) { + fdt_nop_property(fdt, offset, "clock-frequency"); + offset = fdt_node_offset_by_compatible(fdt, offset, "arm,armv8-timer"); + } + } +} + +static void imx8mm_evk_init(MachineState *machine) +{ + static struct arm_boot_info boot_info; + FslImx8mmState *s; + + if (machine->ram_size > FSL_IMX8MM_RAM_SIZE_MAX) { + error_report("RAM size " RAM_ADDR_FMT " above max supported (%08" PRIx64 ")", + machine->ram_size, FSL_IMX8MM_RAM_SIZE_MAX); + exit(1); + } + + boot_info = (struct arm_boot_info) { + .loader_start = FSL_IMX8MM_RAM_START, + .board_id = -1, + .ram_size = machine->ram_size, + .psci_conduit = QEMU_PSCI_CONDUIT_SMC, + .modify_dtb = imx8mm_evk_modify_dtb, + }; + + s = FSL_IMX8MM(object_new_with_props(TYPE_FSL_IMX8MM, OBJECT(machine), + "soc", &error_fatal, NULL)); + sysbus_realize_and_unref(SYS_BUS_DEVICE(s), &error_fatal); + + memory_region_add_subregion(get_system_memory(), FSL_IMX8MM_RAM_START, + machine->ram); + + if (!qtest_enabled()) { + arm_load_kernel(&s->cpu[0], machine, &boot_info); + } +} + +static const char *imx8mm_evk_get_default_cpu_type(const MachineState *ms) +{ + if (kvm_enabled()) { + return ARM_CPU_TYPE_NAME("host"); + } + + return ARM_CPU_TYPE_NAME("cortex-a53"); +} + +static void imx8mm_evk_machine_init(MachineClass *mc) +{ + mc->desc = "NXP i.MX 8MM EVK Board"; + mc->init = imx8mm_evk_init; + mc->max_cpus = FSL_IMX8MM_NUM_CPUS; + mc->default_cpus = FSL_IMX8MM_NUM_CPUS; + mc->default_ram_size = 2 * GiB; + mc->default_ram_id = "imx8mm-evk.ram"; + mc->get_default_cpu_type = imx8mm_evk_get_default_cpu_type; +} + +DEFINE_MACHINE_AARCH64("imx8mm-evk", imx8mm_evk_machine_init) diff --git a/hw/arm/meson.build b/hw/arm/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/meson.build +++ b/hw/arm/meson.build @@ -XXX,XX +XXX,XX @@ arm_common_ss.add(when: 'CONFIG_ARMSSE', if_true: files('armsse.c')) arm_common_ss.add(when: 'CONFIG_FSL_IMX7', if_true: files('fsl-imx7.c', 'mcimx7d-sabre.c')) arm_common_ss.add(when: 'CONFIG_FSL_IMX8MP', if_true: files('fsl-imx8mp.c')) arm_common_ss.add(when: 'CONFIG_FSL_IMX8MP_EVK', if_true: files('imx8mp-evk.c')) +arm_common_ss.add(when: 'CONFIG_FSL_IMX8MM', if_true: files('fsl-imx8mm.c')) +arm_common_ss.add(when: 'CONFIG_FSL_IMX8MM_EVK', if_true: files('imx8mm-evk.c')) arm_common_ss.add(when: 'CONFIG_ARM_SMMUV3', if_true: files('smmuv3.c')) arm_common_ss.add(when: 'CONFIG_ARM_SMMUV3_ACCEL', if_true: files('smmuv3-accel.c')) stub_ss.add(files('smmuv3-accel-stubs.c')) diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ +/* + * i.MX 8MM SoC Definitions + * + * Copyright (c) 2025, NXP Semiconductors + * Author: Gaurav Sharma <gaurav.sharma_7@nxp.com> + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#ifndef FSL_IMX8MM_H +#define FSL_IMX8MM_H + +#include "cpu.h" +#include "hw/char/imx_serial.h" +#include "hw/intc/arm_gicv3_common.h" +#include "qom/object.h" +#include "qemu/units.h" + +#define TYPE_FSL_IMX8MM "fsl-imx8mm" +OBJECT_DECLARE_SIMPLE_TYPE(FslImx8mmState, FSL_IMX8MM) + +#define FSL_IMX8MM_RAM_START 0x40000000 +#define FSL_IMX8MM_RAM_SIZE_MAX (4 * GiB) + +enum FslImx8mmConfiguration { + FSL_IMX8MM_NUM_CPUS = 4, + FSL_IMX8MM_NUM_IRQS = 128, + FSL_IMX8MM_NUM_UARTS = 4, +}; + +struct FslImx8mmState { + SysBusDevice parent_obj; + + ARMCPU cpu[FSL_IMX8MM_NUM_CPUS]; + GICv3State gic; + IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; + MemoryRegion ocram; +}; + +enum FslImx8mmMemoryRegions { + FSL_IMX8MM_A53_DAP, + FSL_IMX8MM_AIPS1_CONFIGURATION, + FSL_IMX8MM_AIPS2_CONFIGURATION, + FSL_IMX8MM_AIPS3_CONFIGURATION, + FSL_IMX8MM_AIPS4_CONFIGURATION, + FSL_IMX8MM_ANA_OSC, + FSL_IMX8MM_ANA_PLL, + FSL_IMX8MM_ANA_TSENSOR, + FSL_IMX8MM_APBH_DMA, + FSL_IMX8MM_BOOT_ROM, + FSL_IMX8MM_BOOT_ROM_PROTECTED, + FSL_IMX8MM_CAAM, + FSL_IMX8MM_CAAM_MEM, + FSL_IMX8MM_CCM, + FSL_IMX8MM_CSU, + FSL_IMX8MM_DDR_CTL, + FSL_IMX8MM_DDR_PERF_MON, + FSL_IMX8MM_DDR_PHY, + FSL_IMX8MM_DDR_PHY_BROADCAST, + FSL_IMX8MM_ECSPI1, + FSL_IMX8MM_ECSPI2, + FSL_IMX8MM_ECSPI3, + FSL_IMX8MM_ENET1, + FSL_IMX8MM_GIC_DIST, + FSL_IMX8MM_GIC_REDIST, + FSL_IMX8MM_GPC, + FSL_IMX8MM_GPIO1, + FSL_IMX8MM_GPIO2, + FSL_IMX8MM_GPIO3, + FSL_IMX8MM_GPIO4, + FSL_IMX8MM_GPIO5, + FSL_IMX8MM_GPT1, + FSL_IMX8MM_GPT2, + FSL_IMX8MM_GPT3, + FSL_IMX8MM_GPT4, + FSL_IMX8MM_GPT5, + FSL_IMX8MM_GPT6, + FSL_IMX8MM_GPU2D, + FSL_IMX8MM_I2C1, + FSL_IMX8MM_I2C2, + FSL_IMX8MM_I2C3, + FSL_IMX8MM_I2C4, + FSL_IMX8MM_INTERCONNECT, + FSL_IMX8MM_IOMUXC, + FSL_IMX8MM_IOMUXC_GPR, + FSL_IMX8MM_MEDIA_BLK_CTL, + FSL_IMX8MM_LCDIF, + FSL_IMX8MM_MIPI_CSI, + FSL_IMX8MM_MIPI_DSI, + FSL_IMX8MM_MU_A, + FSL_IMX8MM_MU_B, + FSL_IMX8MM_OCOTP_CTRL, + FSL_IMX8MM_OCRAM, + FSL_IMX8MM_OCRAM_S, + FSL_IMX8MM_PCIE1, + FSL_IMX8MM_PCIE1_MEM, + FSL_IMX8MM_PCIE_PHY1, + FSL_IMX8MM_PERFMON1, + FSL_IMX8MM_PERFMON2, + FSL_IMX8MM_PWM1, + FSL_IMX8MM_PWM2, + FSL_IMX8MM_PWM3, + FSL_IMX8MM_PWM4, + FSL_IMX8MM_QOSC, + FSL_IMX8MM_QSPI, + FSL_IMX8MM_QSPI1_RX_BUFFER, + FSL_IMX8MM_QSPI1_TX_BUFFER, + FSL_IMX8MM_QSPI_MEM, + FSL_IMX8MM_RAM, + FSL_IMX8MM_RDC, + FSL_IMX8MM_SAI1, + FSL_IMX8MM_SAI2, + FSL_IMX8MM_SAI3, + FSL_IMX8MM_SAI5, + FSL_IMX8MM_SAI6, + FSL_IMX8MM_SDMA1, + FSL_IMX8MM_SDMA2, + FSL_IMX8MM_SDMA3, + FSL_IMX8MM_SEMAPHORE1, + FSL_IMX8MM_SEMAPHORE2, + FSL_IMX8MM_SEMAPHORE_HS, + FSL_IMX8MM_SNVS_HP, + FSL_IMX8MM_SPBA1, + FSL_IMX8MM_SRC, + FSL_IMX8MM_SYSCNT_CMP, + FSL_IMX8MM_SYSCNT_CTRL, + FSL_IMX8MM_SYSCNT_RD, + FSL_IMX8MM_TCM_DTCM, + FSL_IMX8MM_TCM_ITCM, + FSL_IMX8MM_TZASC, + FSL_IMX8MM_UART1, + FSL_IMX8MM_UART2, + FSL_IMX8MM_UART3, + FSL_IMX8MM_UART4, + FSL_IMX8MM_USB1, + FSL_IMX8MM_USB2, + FSL_IMX8MM_USB1_OTG, + FSL_IMX8MM_USB2_OTG, + FSL_IMX8MM_USDHC1, + FSL_IMX8MM_USDHC2, + FSL_IMX8MM_USDHC3, + FSL_IMX8MM_VPU, + FSL_IMX8MM_VPU_BLK_CTRL, + FSL_IMX8MM_VPU_G1_DECODER, + FSL_IMX8MM_VPU_G2_DECODER, + FSL_IMX8MM_WDOG1, + FSL_IMX8MM_WDOG2, + FSL_IMX8MM_WDOG3, +}; + +enum FslImx8mmIrqs { + FSL_IMX8MM_UART1_IRQ = 26, + FSL_IMX8MM_UART2_IRQ = 27, + FSL_IMX8MM_UART3_IRQ = 28, + FSL_IMX8MM_UART4_IRQ = 29, +}; + +#endif /* FSL_IMX8MM_H */ -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> Add configurable properties for register reset values that differ between i.MX 8M variants (Plus, Mini, etc.). This allows the same device implementation to be shared across multiple SoCs. Properties added: - arm-pll-fdiv-ctl0-reset: ARM PLL divider control reset value Default value is set to match i.MX 8MP reset value (0x000FA031). This can be overridden in the variant like iMX8MM with its own reset value. Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/imx8mp_analog.c | 12 +++++++++++- include/hw/misc/imx8mp_analog.h | 3 +++ 2 files changed, 14 insertions(+), 1 deletion(-) diff --git a/hw/misc/imx8mp_analog.c b/hw/misc/imx8mp_analog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/imx8mp_analog.c +++ b/hw/misc/imx8mp_analog.c @@ -XXX,XX +XXX,XX @@ #include "qemu/log.h" #include "hw/misc/imx8mp_analog.h" +#include "hw/core/qdev-properties.h" #include "migration/vmstate.h" #define ANALOG_PLL_LOCK BIT(31) @@ -XXX,XX +XXX,XX @@ static void imx8mp_analog_reset(DeviceState *dev) s->analog[ANALOG_VPU_PLL_LOCKD_CTRL] = 0x0010003f; s->analog[ANALOG_VPU_PLL_MNIT_CTRL] = 0x00280081; s->analog[ANALOG_ARM_PLL_GEN_CTRL] = 0x00000810; - s->analog[ANALOG_ARM_PLL_FDIV_CTL0] = 0x000fa031; + + /* Use property value instead of hardcoded */ + s->analog[ANALOG_ARM_PLL_FDIV_CTL0] = s->arm_pll_fdiv_ctl0_reset; + s->analog[ANALOG_ARM_PLL_LOCKD_CTRL] = 0x0010003f; s->analog[ANALOG_ARM_PLL_MNIT_CTRL] = 0x00280081; s->analog[ANALOG_SYS_PLL1_GEN_CTRL] = 0x0aaaa810; @@ -XXX,XX +XXX,XX @@ static const VMStateDescription imx8mp_analog_vmstate = { }, }; +static const Property imx8mp_analog_properties[] = { + DEFINE_PROP_UINT32("arm-pll-fdiv-ctl0-reset", IMX8MPAnalogState, + arm_pll_fdiv_ctl0_reset, 0x000fa031), /* imx8mp default */ +}; + static void imx8mp_analog_class_init(ObjectClass *klass, const void *data) { DeviceClass *dc = DEVICE_CLASS(klass); device_class_set_legacy_reset(dc, imx8mp_analog_reset); + device_class_set_props(dc, imx8mp_analog_properties); dc->vmsd = &imx8mp_analog_vmstate; dc->desc = "i.MX 8M Plus Analog Module"; } diff --git a/include/hw/misc/imx8mp_analog.h b/include/hw/misc/imx8mp_analog.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/imx8mp_analog.h +++ b/include/hw/misc/imx8mp_analog.h @@ -XXX,XX +XXX,XX @@ struct IMX8MPAnalogState { } mmio; uint32_t analog[ANALOG_MAX]; + + /* Property for variant-specific reset values */ + uint32_t arm_pll_fdiv_ctl0_reset; }; #endif /* IMX8MP_ANALOG_H */ -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> Add the Analog IP to i.MX8MM SoC. iMX8MM and i.MX8MP uses the same Analog IP so the analog ip source will be shared. The ARM PLL divider control register (arm-pll-fdiv-ctl0) has a different reset value on i.MX8MM (0x000fa030) compared to i.MX8MP (0x000fa031). So iMX8MM will be overriding this property with its own reset-value. Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx8mm.c | 12 ++++++++++++ include/hw/arm/fsl-imx8mm.h | 2 ++ 3 files changed, 15 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MP_EVK config FSL_IMX8MM bool select ARM_GIC + select FSL_IMX8MP_ANALOG select IMX config FSL_IMX8MM_EVK diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, "gic", &s->gic, gicv3_class_name()); + object_initialize_child(obj, "analog", &s->analog, TYPE_IMX8MP_ANALOG); + for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) { g_autofree char *name = g_strdup_printf("uart%d", i + 1); object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) } } + /* Analog */ + object_property_set_uint(OBJECT(&s->analog), "arm-pll-fdiv-ctl0-reset", + 0x000fa030, &error_abort); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->analog), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->analog), 0, + fsl_imx8mm_memmap[FSL_IMX8MM_ANA_PLL].addr); + /* UARTs */ for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) { static const struct { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) /* Unimplemented devices */ for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) { switch (i) { + case FSL_IMX8MM_ANA_PLL: case FSL_IMX8MM_GIC_DIST: case FSL_IMX8MM_GIC_REDIST: case FSL_IMX8MM_RAM: diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "hw/char/imx_serial.h" #include "hw/intc/arm_gicv3_common.h" +#include "hw/misc/imx8mp_analog.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { ARMCPU cpu[FSL_IMX8MM_NUM_CPUS]; GICv3State gic; + IMX8MPAnalogState analog; IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; }; -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> Add the Clock Control Module (CCM) device to i.MX8MM SoC. The CCM implementation is shared with i.MX8MP as the register layout is identical between the two variants.Hence iMX8MM will be using the source of iMX8MP CCM. Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx8mm.c | 10 ++++++++++ include/hw/arm/fsl-imx8mm.h | 2 ++ 3 files changed, 13 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM bool select ARM_GIC select FSL_IMX8MP_ANALOG + select FSL_IMX8MP_CCM select IMX config FSL_IMX8MM_EVK diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, "gic", &s->gic, gicv3_class_name()); + object_initialize_child(obj, "ccm", &s->ccm, TYPE_IMX8MP_CCM); + object_initialize_child(obj, "analog", &s->analog, TYPE_IMX8MP_ANALOG); for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) } } + /* CCM */ + if (!sysbus_realize(SYS_BUS_DEVICE(&s->ccm), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->ccm), 0, + fsl_imx8mm_memmap[FSL_IMX8MM_CCM].addr); + /* Analog */ object_property_set_uint(OBJECT(&s->analog), "arm-pll-fdiv-ctl0-reset", 0x000fa030, &error_abort); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) { switch (i) { case FSL_IMX8MM_ANA_PLL: + case FSL_IMX8MM_CCM: case FSL_IMX8MM_GIC_DIST: case FSL_IMX8MM_GIC_REDIST: case FSL_IMX8MM_RAM: diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/char/imx_serial.h" #include "hw/intc/arm_gicv3_common.h" #include "hw/misc/imx8mp_analog.h" +#include "hw/misc/imx8mp_ccm.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { ARMCPU cpu[FSL_IMX8MM_NUM_CPUS]; GICv3State gic; + IMX8MPCCMState ccm; IMX8MPAnalogState analog; IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> SNVS contains an RTC which allows Linux to deal correctly with time Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/fsl-imx8mm.c | 10 ++++++++++ include/hw/arm/fsl-imx8mm.h | 2 ++ 2 files changed, 12 insertions(+) diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, "analog", &s->analog, TYPE_IMX8MP_ANALOG); + object_initialize_child(obj, "snvs", &s->snvs, TYPE_IMX7_SNVS); + for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) { g_autofree char *name = g_strdup_printf("uart%d", i + 1); object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr, &s->ocram); + /* SNVS */ + if (!sysbus_realize(SYS_BUS_DEVICE(&s->snvs), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, + fsl_imx8mm_memmap[FSL_IMX8MM_SNVS_HP].addr); + /* Unimplemented devices */ for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) { switch (i) { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_GIC_REDIST: case FSL_IMX8MM_RAM: case FSL_IMX8MM_OCRAM: + case FSL_IMX8MM_SNVS_HP: case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4: /* device implemented and treated above */ break; diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "hw/char/imx_serial.h" #include "hw/intc/arm_gicv3_common.h" +#include "hw/misc/imx7_snvs.h" #include "hw/misc/imx8mp_analog.h" #include "hw/misc/imx8mp_ccm.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { GICv3State gic; IMX8MPCCMState ccm; IMX8MPAnalogState analog; + IMX7SNVSState snvs; IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; }; -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> It enables emulation of SD/MMC cards through a virtual SDHCI interface The emulated SDHCI controller allows guest OS to use emulated storage as a standard block device. This will allow running the images such as those generated by Buildroot. Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx8mm.c | 25 +++++++++++++++++++++++++ hw/arm/imx8mm-evk.c | 17 +++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 7 +++++++ 4 files changed, 50 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM select FSL_IMX8MP_ANALOG select FSL_IMX8MP_CCM select IMX + select SDHCI config FSL_IMX8MM_EVK bool diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); } + for (i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) { + g_autofree char *name = g_strdup_printf("usdhc%d", i + 1); + object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC); + } } static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr, &s->ocram); + /* USDHCs */ + for (i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) { + static const struct { + hwaddr addr; + unsigned int irq; + } usdhc_table[FSL_IMX8MM_NUM_USDHCS] = { + { fsl_imx8mm_memmap[FSL_IMX8MM_USDHC1].addr, FSL_IMX8MM_USDHC1_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_USDHC2].addr, FSL_IMX8MM_USDHC2_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_USDHC3].addr, FSL_IMX8MM_USDHC3_IRQ }, + }; + + if (!sysbus_realize(SYS_BUS_DEVICE(&s->usdhc[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->usdhc[i]), 0, usdhc_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->usdhc[i]), 0, + qdev_get_gpio_in(gicdev, usdhc_table[i].irq)); + } + /* SNVS */ if (!sysbus_realize(SYS_BUS_DEVICE(&s->snvs), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_OCRAM: case FSL_IMX8MM_SNVS_HP: case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4: + case FSL_IMX8MM_USDHC1 ... FSL_IMX8MM_USDHC3: /* device implemented and treated above */ break; diff --git a/hw/arm/imx8mm-evk.c b/hw/arm/imx8mm-evk.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/imx8mm-evk.c +++ b/hw/arm/imx8mm-evk.c @@ -XXX,XX +XXX,XX @@ static void imx8mm_evk_init(MachineState *machine) memory_region_add_subregion(get_system_memory(), FSL_IMX8MM_RAM_START, machine->ram); + for (int i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) { + BusState *bus; + DeviceState *carddev; + BlockBackend *blk; + DriveInfo *di = drive_get(IF_SD, i, 0); + + if (!di) { + continue; + } + + blk = blk_by_legacy_dinfo(di); + bus = qdev_get_child_bus(DEVICE(&s->usdhc[i]), "sd-bus"); + carddev = qdev_new(TYPE_SD_CARD); + qdev_prop_set_drive_err(carddev, "drive", blk, &error_fatal); + qdev_realize_and_unref(carddev, bus, &error_fatal); + } + if (!qtest_enabled()) { arm_load_kernel(&s->cpu[0], machine, &boot_info); } diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx8mp_analog.h" #include "hw/misc/imx8mp_ccm.h" +#include "hw/sd/sdhci.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ enum FslImx8mmConfiguration { FSL_IMX8MM_NUM_CPUS = 4, FSL_IMX8MM_NUM_IRQS = 128, FSL_IMX8MM_NUM_UARTS = 4, + FSL_IMX8MM_NUM_USDHCS = 3, }; struct FslImx8mmState { @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMX7SNVSState snvs; IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; + SDHCIState usdhc[FSL_IMX8MM_NUM_USDHCS]; }; enum FslImx8mmMemoryRegions { @@ -XXX,XX +XXX,XX @@ enum FslImx8mmMemoryRegions { }; enum FslImx8mmIrqs { + FSL_IMX8MM_USDHC1_IRQ = 22, + FSL_IMX8MM_USDHC2_IRQ = 23, + FSL_IMX8MM_USDHC3_IRQ = 24, + FSL_IMX8MM_UART1_IRQ = 26, FSL_IMX8MM_UART2_IRQ = 27, FSL_IMX8MM_UART3_IRQ = 28, -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> This enables support for Designware PCI Express Controller emulation It provides a controlled environment to debug the linux pci subsystem Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 3 +++ hw/arm/fsl-imx8mm.c | 30 ++++++++++++++++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 10 ++++++++++ 3 files changed, 43 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MP_EVK config FSL_IMX8MM bool + imply PCI_DEVICES select ARM_GIC select FSL_IMX8MP_ANALOG select FSL_IMX8MP_CCM select IMX select SDHCI + select PCI_EXPRESS_DESIGNWARE + select PCI_EXPRESS_FSL_IMX8M_PHY config FSL_IMX8MM_EVK bool diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) g_autofree char *name = g_strdup_printf("usdhc%d", i + 1); object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC); } + + object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST); + object_initialize_child(obj, "pcie_phy", &s->pcie_phy, + TYPE_FSL_IMX8M_PCIE_PHY); } static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, fsl_imx8mm_memmap[FSL_IMX8MM_SNVS_HP].addr); + /* PCIe */ + if (!sysbus_realize(SYS_BUS_DEVICE(&s->pcie), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->pcie), 0, + fsl_imx8mm_memmap[FSL_IMX8MM_PCIE1].addr); + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 0, + qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_INTA_IRQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 1, + qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_INTB_IRQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 2, + qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_INTC_IRQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 3, + qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_INTD_IRQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 4, + qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_MSI_IRQ)); + + if (!sysbus_realize(SYS_BUS_DEVICE(&s->pcie_phy), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->pcie_phy), 0, + fsl_imx8mm_memmap[FSL_IMX8MM_PCIE_PHY1].addr); + /* Unimplemented devices */ for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) { switch (i) { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_CCM: case FSL_IMX8MM_GIC_DIST: case FSL_IMX8MM_GIC_REDIST: + case FSL_IMX8MM_PCIE1: + case FSL_IMX8MM_PCIE_PHY1: case FSL_IMX8MM_RAM: case FSL_IMX8MM_OCRAM: case FSL_IMX8MM_SNVS_HP: diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx8mp_analog.h" #include "hw/misc/imx8mp_ccm.h" +#include "hw/pci-host/designware.h" +#include "hw/pci-host/fsl_imx8m_phy.h" #include "hw/sd/sdhci.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; SDHCIState usdhc[FSL_IMX8MM_NUM_USDHCS]; + DesignwarePCIEHost pcie; + FslImx8mPciePhyState pcie_phy; }; enum FslImx8mmMemoryRegions { @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_UART2_IRQ = 27, FSL_IMX8MM_UART3_IRQ = 28, FSL_IMX8MM_UART4_IRQ = 29, + + FSL_IMX8MM_PCI_INTA_IRQ = 122, + FSL_IMX8MM_PCI_INTB_IRQ = 123, + FSL_IMX8MM_PCI_INTC_IRQ = 124, + FSL_IMX8MM_PCI_INTD_IRQ = 125, + FSL_IMX8MM_PCI_MSI_IRQ = 127, }; #endif /* FSL_IMX8MM_H */ -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> Enabled GPIO controller emulation Also updated the GPIO IRQ lines of iMX8MM Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/fsl-imx8mm.c | 54 +++++++++++++++++++++++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 14 ++++++++++ 2 files changed, 68 insertions(+) diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); } + for (i = 0; i < FSL_IMX8MM_NUM_GPIOS; i++) { + g_autofree char *name = g_strdup_printf("gpio%d", i + 1); + object_initialize_child(obj, name, &s->gpio[i], TYPE_IMX_GPIO); + } + for (i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) { g_autofree char *name = g_strdup_printf("usdhc%d", i + 1); object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr, &s->ocram); + /* GPIOs */ + for (i = 0; i < FSL_IMX8MM_NUM_GPIOS; i++) { + static const struct { + hwaddr addr; + unsigned int irq_low; + unsigned int irq_high; + } gpio_table[FSL_IMX8MM_NUM_GPIOS] = { + { + fsl_imx8mm_memmap[FSL_IMX8MM_GPIO1].addr, + FSL_IMX8MM_GPIO1_LOW_IRQ, + FSL_IMX8MM_GPIO1_HIGH_IRQ + }, + { + fsl_imx8mm_memmap[FSL_IMX8MM_GPIO2].addr, + FSL_IMX8MM_GPIO2_LOW_IRQ, + FSL_IMX8MM_GPIO2_HIGH_IRQ + }, + { + fsl_imx8mm_memmap[FSL_IMX8MM_GPIO3].addr, + FSL_IMX8MM_GPIO3_LOW_IRQ, + FSL_IMX8MM_GPIO3_HIGH_IRQ + }, + { + fsl_imx8mm_memmap[FSL_IMX8MM_GPIO4].addr, + FSL_IMX8MM_GPIO4_LOW_IRQ, + FSL_IMX8MM_GPIO4_HIGH_IRQ + }, + { + fsl_imx8mm_memmap[FSL_IMX8MM_GPIO5].addr, + FSL_IMX8MM_GPIO5_LOW_IRQ, + FSL_IMX8MM_GPIO5_HIGH_IRQ + }, + }; + object_property_set_bool(OBJECT(&s->gpio[i]), "has-edge-sel", true, + &error_abort); + object_property_set_bool(OBJECT(&s->gpio[i]), "has-upper-pin-irq", + true, &error_abort); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpio[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio[i]), 0, gpio_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 0, + qdev_get_gpio_in(gicdev, gpio_table[i].irq_low)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 1, + qdev_get_gpio_in(gicdev, gpio_table[i].irq_high)); + } + /* USDHCs */ for (i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) { static const struct { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_CCM: case FSL_IMX8MM_GIC_DIST: case FSL_IMX8MM_GIC_REDIST: + case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5: case FSL_IMX8MM_PCIE1: case FSL_IMX8MM_PCIE_PHY1: case FSL_IMX8MM_RAM: diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "hw/char/imx_serial.h" +#include "hw/gpio/imx_gpio.h" #include "hw/intc/arm_gicv3_common.h" #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx8mp_analog.h" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(FslImx8mmState, FSL_IMX8MM) enum FslImx8mmConfiguration { FSL_IMX8MM_NUM_CPUS = 4, + FSL_IMX8MM_NUM_GPIOS = 5, FSL_IMX8MM_NUM_IRQS = 128, FSL_IMX8MM_NUM_UARTS = 4, FSL_IMX8MM_NUM_USDHCS = 3, @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { ARMCPU cpu[FSL_IMX8MM_NUM_CPUS]; GICv3State gic; + IMXGPIOState gpio[FSL_IMX8MM_NUM_GPIOS]; IMX8MPCCMState ccm; IMX8MPAnalogState analog; IMX7SNVSState snvs; @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_UART3_IRQ = 28, FSL_IMX8MM_UART4_IRQ = 29, + FSL_IMX8MM_GPIO1_LOW_IRQ = 64, + FSL_IMX8MM_GPIO1_HIGH_IRQ = 65, + FSL_IMX8MM_GPIO2_LOW_IRQ = 66, + FSL_IMX8MM_GPIO2_HIGH_IRQ = 67, + FSL_IMX8MM_GPIO3_LOW_IRQ = 68, + FSL_IMX8MM_GPIO3_HIGH_IRQ = 69, + FSL_IMX8MM_GPIO4_LOW_IRQ = 70, + FSL_IMX8MM_GPIO4_HIGH_IRQ = 71, + FSL_IMX8MM_GPIO5_LOW_IRQ = 72, + FSL_IMX8MM_GPIO5_HIGH_IRQ = 73, + FSL_IMX8MM_PCI_INTA_IRQ = 122, FSL_IMX8MM_PCI_INTB_IRQ = 123, FSL_IMX8MM_PCI_INTC_IRQ = 124, -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> This can be used to test and debug I2C device drivers. Added I2C interrupts Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 2 ++ hw/arm/fsl-imx8mm.c | 27 +++++++++++++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 8 ++++++++ 3 files changed, 37 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MP_EVK config FSL_IMX8MM bool imply PCI_DEVICES + imply I2C_DEVICES select ARM_GIC select FSL_IMX8MP_ANALOG select FSL_IMX8MP_CCM select IMX + select IMX_I2C select SDHCI select PCI_EXPRESS_DESIGNWARE select PCI_EXPRESS_FSL_IMX8M_PHY diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); } + for (i = 0; i < FSL_IMX8MM_NUM_I2CS; i++) { + g_autofree char *name = g_strdup_printf("i2c%d", i + 1); + object_initialize_child(obj, name, &s->i2c[i], TYPE_IMX_I2C); + } + for (i = 0; i < FSL_IMX8MM_NUM_GPIOS; i++) { g_autofree char *name = g_strdup_printf("gpio%d", i + 1); object_initialize_child(obj, name, &s->gpio[i], TYPE_IMX_GPIO); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr, &s->ocram); + /* I2Cs */ + for (i = 0; i < FSL_IMX8MM_NUM_I2CS; i++) { + static const struct { + hwaddr addr; + unsigned int irq; + } i2c_table[FSL_IMX8MM_NUM_I2CS] = { + { fsl_imx8mm_memmap[FSL_IMX8MM_I2C1].addr, FSL_IMX8MM_I2C1_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_I2C2].addr, FSL_IMX8MM_I2C2_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_I2C3].addr, FSL_IMX8MM_I2C3_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_I2C4].addr, FSL_IMX8MM_I2C4_IRQ }, + }; + + if (!sysbus_realize(SYS_BUS_DEVICE(&s->i2c[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c[i]), 0, i2c_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c[i]), 0, + qdev_get_gpio_in(gicdev, i2c_table[i].irq)); + } + /* GPIOs */ for (i = 0; i < FSL_IMX8MM_NUM_GPIOS; i++) { static const struct { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_GIC_DIST: case FSL_IMX8MM_GIC_REDIST: case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5: + case FSL_IMX8MM_I2C1 ... FSL_IMX8MM_I2C4: case FSL_IMX8MM_PCIE1: case FSL_IMX8MM_PCIE_PHY1: case FSL_IMX8MM_RAM: diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "hw/char/imx_serial.h" #include "hw/gpio/imx_gpio.h" +#include "hw/i2c/imx_i2c.h" #include "hw/intc/arm_gicv3_common.h" #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx8mp_analog.h" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(FslImx8mmState, FSL_IMX8MM) enum FslImx8mmConfiguration { FSL_IMX8MM_NUM_CPUS = 4, FSL_IMX8MM_NUM_GPIOS = 5, + FSL_IMX8MM_NUM_I2CS = 4, FSL_IMX8MM_NUM_IRQS = 128, FSL_IMX8MM_NUM_UARTS = 4, FSL_IMX8MM_NUM_USDHCS = 3, @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMX8MPCCMState ccm; IMX8MPAnalogState analog; IMX7SNVSState snvs; + IMXI2CState i2c[FSL_IMX8MM_NUM_I2CS]; IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; SDHCIState usdhc[FSL_IMX8MM_NUM_USDHCS]; @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_UART3_IRQ = 28, FSL_IMX8MM_UART4_IRQ = 29, + FSL_IMX8MM_I2C1_IRQ = 35, + FSL_IMX8MM_I2C2_IRQ = 36, + FSL_IMX8MM_I2C3_IRQ = 37, + FSL_IMX8MM_I2C4_IRQ = 38, + FSL_IMX8MM_GPIO1_LOW_IRQ = 64, FSL_IMX8MM_GPIO1_HIGH_IRQ = 65, FSL_IMX8MM_GPIO2_LOW_IRQ = 66, -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> It enables emulation of ECSPI in iMX8MM Added SPI IRQ lines Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/fsl-imx8mm.c | 26 ++++++++++++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 7 +++++++ 2 files changed, 33 insertions(+) diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC); } + for (i = 0; i < FSL_IMX8MM_NUM_ECSPIS; i++) { + g_autofree char *name = g_strdup_printf("spi%d", i + 1); + object_initialize_child(obj, name, &s->spi[i], TYPE_IMX_SPI); + } + object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST); object_initialize_child(obj, "pcie_phy", &s->pcie_phy, TYPE_FSL_IMX8M_PCIE_PHY); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) qdev_get_gpio_in(gicdev, usdhc_table[i].irq)); } + /* ECSPIs */ + for (i = 0; i < FSL_IMX8MM_NUM_ECSPIS; i++) { + static const struct { + hwaddr addr; + unsigned int irq; + } spi_table[FSL_IMX8MM_NUM_ECSPIS] = { + { fsl_imx8mm_memmap[FSL_IMX8MM_ECSPI1].addr, FSL_IMX8MM_ECSPI1_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_ECSPI2].addr, FSL_IMX8MM_ECSPI2_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_ECSPI3].addr, FSL_IMX8MM_ECSPI3_IRQ }, + }; + + if (!sysbus_realize(SYS_BUS_DEVICE(&s->spi[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0, spi_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0, + qdev_get_gpio_in(gicdev, spi_table[i].irq)); + } + /* SNVS */ if (!sysbus_realize(SYS_BUS_DEVICE(&s->snvs), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_GIC_DIST: case FSL_IMX8MM_GIC_REDIST: case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5: + case FSL_IMX8MM_ECSPI1 ... FSL_IMX8MM_ECSPI3: case FSL_IMX8MM_I2C1 ... FSL_IMX8MM_I2C4: case FSL_IMX8MM_PCIE1: case FSL_IMX8MM_PCIE_PHY1: diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/pci-host/designware.h" #include "hw/pci-host/fsl_imx8m_phy.h" #include "hw/sd/sdhci.h" +#include "hw/ssi/imx_spi.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(FslImx8mmState, FSL_IMX8MM) enum FslImx8mmConfiguration { FSL_IMX8MM_NUM_CPUS = 4, + FSL_IMX8MM_NUM_ECSPIS = 3, FSL_IMX8MM_NUM_GPIOS = 5, FSL_IMX8MM_NUM_I2CS = 4, FSL_IMX8MM_NUM_IRQS = 128, @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMX8MPCCMState ccm; IMX8MPAnalogState analog; IMX7SNVSState snvs; + IMXSPIState spi[FSL_IMX8MM_NUM_ECSPIS]; IMXI2CState i2c[FSL_IMX8MM_NUM_I2CS]; IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_UART3_IRQ = 28, FSL_IMX8MM_UART4_IRQ = 29, + FSL_IMX8MM_ECSPI1_IRQ = 31, + FSL_IMX8MM_ECSPI2_IRQ = 32, + FSL_IMX8MM_ECSPI3_IRQ = 33, + FSL_IMX8MM_I2C1_IRQ = 35, FSL_IMX8MM_I2C2_IRQ = 36, FSL_IMX8MM_I2C3_IRQ = 37, -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> It enables emulation of WDT in iMX8MM Added WDT IRQ lines Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx8mm.c | 28 ++++++++++++++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 7 +++++++ 3 files changed, 36 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM select SDHCI select PCI_EXPRESS_DESIGNWARE select PCI_EXPRESS_FSL_IMX8M_PHY + select WDT_IMX2 config FSL_IMX8MM_EVK bool diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->spi[i], TYPE_IMX_SPI); } + for (i = 0; i < FSL_IMX8MM_NUM_WDTS; i++) { + g_autofree char *name = g_strdup_printf("wdt%d", i); + object_initialize_child(obj, name, &s->wdt[i], TYPE_IMX2_WDT); + } + object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST); object_initialize_child(obj, "pcie_phy", &s->pcie_phy, TYPE_FSL_IMX8M_PCIE_PHY); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, fsl_imx8mm_memmap[FSL_IMX8MM_SNVS_HP].addr); + /* Watchdogs */ + for (i = 0; i < FSL_IMX8MM_NUM_WDTS; i++) { + static const struct { + hwaddr addr; + unsigned int irq; + } wdog_table[FSL_IMX8MM_NUM_WDTS] = { + { fsl_imx8mm_memmap[FSL_IMX8MM_WDOG1].addr, FSL_IMX8MM_WDOG1_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_WDOG2].addr, FSL_IMX8MM_WDOG2_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_WDOG3].addr, FSL_IMX8MM_WDOG3_IRQ }, + }; + + object_property_set_bool(OBJECT(&s->wdt[i]), "pretimeout-support", + true, &error_abort); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->wdt[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[i]), 0, wdog_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->wdt[i]), 0, + qdev_get_gpio_in(gicdev, wdog_table[i].irq)); + } + /* PCIe */ if (!sysbus_realize(SYS_BUS_DEVICE(&s->pcie), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_SNVS_HP: case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4: case FSL_IMX8MM_USDHC1 ... FSL_IMX8MM_USDHC3: + case FSL_IMX8MM_WDOG1 ... FSL_IMX8MM_WDOG3: /* device implemented and treated above */ break; diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/pci-host/fsl_imx8m_phy.h" #include "hw/sd/sdhci.h" #include "hw/ssi/imx_spi.h" +#include "hw/watchdog/wdt_imx2.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ enum FslImx8mmConfiguration { FSL_IMX8MM_NUM_IRQS = 128, FSL_IMX8MM_NUM_UARTS = 4, FSL_IMX8MM_NUM_USDHCS = 3, + FSL_IMX8MM_NUM_WDTS = 3, }; struct FslImx8mmState { @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; SDHCIState usdhc[FSL_IMX8MM_NUM_USDHCS]; + IMX2WdtState wdt[FSL_IMX8MM_NUM_WDTS]; DesignwarePCIEHost pcie; FslImx8mPciePhyState pcie_phy; }; @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_GPIO5_LOW_IRQ = 72, FSL_IMX8MM_GPIO5_HIGH_IRQ = 73, + FSL_IMX8MM_WDOG1_IRQ = 78, + FSL_IMX8MM_WDOG2_IRQ = 79, + FSL_IMX8MM_WDOG3_IRQ = 10, + FSL_IMX8MM_PCI_INTA_IRQ = 122, FSL_IMX8MM_PCI_INTB_IRQ = 123, FSL_IMX8MM_PCI_INTC_IRQ = 124, -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> It enables emulation of GPT in iMX8MM Added GPT IRQ lines Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx8mm.c | 54 +++++++++++++++++++++++++++++++++++++ hw/timer/imx_gpt.c | 26 ++++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 11 ++++++++ include/hw/timer/imx_gpt.h | 2 ++ 5 files changed, 94 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM select FSL_IMX8MP_CCM select IMX select IMX_I2C + select OR_IRQ select SDHCI select PCI_EXPRESS_DESIGNWARE select PCI_EXPRESS_FSL_IMX8M_PHY diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); } + for (i = 0; i < FSL_IMX8MM_NUM_GPTS; i++) { + g_autofree char *name = g_strdup_printf("gpt%d", i + 1); + object_initialize_child(obj, name, &s->gpt[i], TYPE_IMX8MM_GPT); + } + object_initialize_child(obj, "gpt5-gpt6-irq", &s->gpt5_gpt6_irq, + TYPE_OR_IRQ); + for (i = 0; i < FSL_IMX8MM_NUM_I2CS; i++) { g_autofree char *name = g_strdup_printf("i2c%d", i + 1); object_initialize_child(obj, name, &s->i2c[i], TYPE_IMX_I2C); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr, &s->ocram); + /* GPTs */ + object_property_set_int(OBJECT(&s->gpt5_gpt6_irq), "num-lines", 2, + &error_abort); + if (!qdev_realize(DEVICE(&s->gpt5_gpt6_irq), NULL, errp)) { + return; + } + + qdev_connect_gpio_out(DEVICE(&s->gpt5_gpt6_irq), 0, + qdev_get_gpio_in(gicdev, FSL_IMX8MM_GPT5_GPT6_IRQ)); + + for (i = 0; i < FSL_IMX8MM_NUM_GPTS; i++) { + hwaddr gpt_addrs[FSL_IMX8MM_NUM_GPTS] = { + fsl_imx8mm_memmap[FSL_IMX8MM_GPT1].addr, + fsl_imx8mm_memmap[FSL_IMX8MM_GPT2].addr, + fsl_imx8mm_memmap[FSL_IMX8MM_GPT3].addr, + fsl_imx8mm_memmap[FSL_IMX8MM_GPT4].addr, + fsl_imx8mm_memmap[FSL_IMX8MM_GPT5].addr, + fsl_imx8mm_memmap[FSL_IMX8MM_GPT6].addr, + }; + + s->gpt[i].ccm = IMX_CCM(&s->ccm); + + if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpt[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpt[i]), 0, gpt_addrs[i]); + + if (i < FSL_IMX8MM_NUM_GPTS - 2) { + static const unsigned int gpt_irqs[FSL_IMX8MM_NUM_GPTS - 2] = { + FSL_IMX8MM_GPT1_IRQ, + FSL_IMX8MM_GPT2_IRQ, + FSL_IMX8MM_GPT3_IRQ, + FSL_IMX8MM_GPT4_IRQ, + }; + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpt[i]), 0, + qdev_get_gpio_in(gicdev, gpt_irqs[i])); + } else { + int irq = i - FSL_IMX8MM_NUM_GPTS + 2; + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpt[i]), 0, + qdev_get_gpio_in(DEVICE(&s->gpt5_gpt6_irq), irq)); + } + } + /* I2Cs */ for (i = 0; i < FSL_IMX8MM_NUM_I2CS; i++) { static const struct { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_GIC_DIST: case FSL_IMX8MM_GIC_REDIST: case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5: + case FSL_IMX8MM_GPT1 ... FSL_IMX8MM_GPT6: case FSL_IMX8MM_ECSPI1 ... FSL_IMX8MM_ECSPI3: case FSL_IMX8MM_I2C1 ... FSL_IMX8MM_I2C4: case FSL_IMX8MM_PCIE1: diff --git a/hw/timer/imx_gpt.c b/hw/timer/imx_gpt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/imx_gpt.c +++ b/hw/timer/imx_gpt.c @@ -XXX,XX +XXX,XX @@ * Originally written by Hans Jiang * Updated by Peter Chubb * Updated by Jean-Christophe Dubois <jcd@tribudubois.net> + * Updated by Gaurav Sharma <gaurav.sharma_7@nxp.com> * * This code is licensed under GPL version 2 or later. See * the COPYING file in the top-level directory. @@ -XXX,XX +XXX,XX @@ static const IMXClk imx8mp_gpt_clocks[] = { CLK_NONE, /* 111 not defined */ }; +static const IMXClk imx8mm_gpt_clocks[] = { + CLK_NONE, /* 000 No clock source */ + CLK_IPG, /* 001 ipg_clk, 532MHz */ + CLK_IPG_HIGH, /* 010 ipg_clk_highfreq */ + CLK_EXT, /* 011 External clock */ + CLK_32k, /* 100 ipg_clk_32k */ + CLK_HIGH, /* 101 ipg_clk_16M */ + CLK_NONE, /* 110 not defined */ + CLK_NONE, /* 111 not defined */ +}; + /* Must be called from within ptimer_transaction_begin/commit block */ static void imx_gpt_set_freq(IMXGPTState *s) { @@ -XXX,XX +XXX,XX @@ static void imx8mp_gpt_init(Object *obj) s->clocks = imx8mp_gpt_clocks; } +static void imx8mm_gpt_init(Object *obj) +{ + IMXGPTState *s = IMX_GPT(obj); + + s->clocks = imx8mm_gpt_clocks; +} + static const TypeInfo imx25_gpt_info = { .name = TYPE_IMX25_GPT, .parent = TYPE_SYS_BUS_DEVICE, @@ -XXX,XX +XXX,XX @@ static const TypeInfo imx8mp_gpt_info = { .instance_init = imx8mp_gpt_init, }; +static const TypeInfo imx8mm_gpt_info = { + .name = TYPE_IMX8MM_GPT, + .parent = TYPE_IMX25_GPT, + .instance_init = imx8mm_gpt_init, +}; + static void imx_gpt_register_types(void) { type_register_static(&imx25_gpt_info); @@ -XXX,XX +XXX,XX @@ static void imx_gpt_register_types(void) type_register_static(&imx6ul_gpt_info); type_register_static(&imx7_gpt_info); type_register_static(&imx8mp_gpt_info); + type_register_static(&imx8mm_gpt_info); } type_init(imx_gpt_register_types) diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx8mp_analog.h" #include "hw/misc/imx8mp_ccm.h" +#include "hw/or-irq.h" #include "hw/pci-host/designware.h" #include "hw/pci-host/fsl_imx8m_phy.h" #include "hw/sd/sdhci.h" #include "hw/ssi/imx_spi.h" +#include "hw/timer/imx_gpt.h" #include "hw/watchdog/wdt_imx2.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ enum FslImx8mmConfiguration { FSL_IMX8MM_NUM_CPUS = 4, FSL_IMX8MM_NUM_ECSPIS = 3, FSL_IMX8MM_NUM_GPIOS = 5, + FSL_IMX8MM_NUM_GPTS = 6, FSL_IMX8MM_NUM_I2CS = 4, FSL_IMX8MM_NUM_IRQS = 128, FSL_IMX8MM_NUM_UARTS = 4, @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { ARMCPU cpu[FSL_IMX8MM_NUM_CPUS]; GICv3State gic; + IMXGPTState gpt[FSL_IMX8MM_NUM_GPTS]; IMXGPIOState gpio[FSL_IMX8MM_NUM_GPIOS]; IMX8MPCCMState ccm; IMX8MPAnalogState analog; @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMX2WdtState wdt[FSL_IMX8MM_NUM_WDTS]; DesignwarePCIEHost pcie; FslImx8mPciePhyState pcie_phy; + OrIRQState gpt5_gpt6_irq; }; enum FslImx8mmMemoryRegions { @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_I2C3_IRQ = 37, FSL_IMX8MM_I2C4_IRQ = 38, + FSL_IMX8MM_GPT1_IRQ = 55, + FSL_IMX8MM_GPT2_IRQ = 54, + FSL_IMX8MM_GPT3_IRQ = 53, + FSL_IMX8MM_GPT4_IRQ = 52, + FSL_IMX8MM_GPT5_GPT6_IRQ = 51, + FSL_IMX8MM_GPIO1_LOW_IRQ = 64, FSL_IMX8MM_GPIO1_HIGH_IRQ = 65, FSL_IMX8MM_GPIO2_LOW_IRQ = 66, diff --git a/include/hw/timer/imx_gpt.h b/include/hw/timer/imx_gpt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/imx_gpt.h +++ b/include/hw/timer/imx_gpt.h @@ -XXX,XX +XXX,XX @@ * Originally written by Hans Jiang * Updated by Peter Chubb * Updated by Jean-Christophe Dubois <jcd@tribudubois.net> + * Updated by Gaurav Sharma <gaurav.sharma_7@nxp.com> * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal @@ -XXX,XX +XXX,XX @@ #define TYPE_IMX6UL_GPT "imx6ul.gpt" #define TYPE_IMX7_GPT "imx7.gpt" #define TYPE_IMX8MP_GPT "imx8mp.gpt" +#define TYPE_IMX8MM_GPT "imx8mm.gpt" #define TYPE_IMX_GPT TYPE_IMX25_GPT -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> It enables emulation of ENET ethernet controller in iMX8MM Enables testing and debugging of network dependent drivers Added ENET MAC IRQ lines Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx8mm.c | 24 ++++++++++++++++++++++++ hw/arm/imx8mm-evk.c | 1 + include/hw/arm/fsl-imx8mm.h | 10 +++++++++- 4 files changed, 35 insertions(+), 1 deletion(-) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM select FSL_IMX8MP_ANALOG select FSL_IMX8MP_CCM select IMX + select IMX_FEC select IMX_I2C select OR_IRQ select SDHCI diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->wdt[i], TYPE_IMX2_WDT); } + object_initialize_child(obj, "eth0", &s->enet, TYPE_IMX_ENET); + object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST); object_initialize_child(obj, "pcie_phy", &s->pcie_phy, TYPE_FSL_IMX8M_PCIE_PHY); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) qdev_get_gpio_in(gicdev, spi_table[i].irq)); } + /* ENET1 */ + object_property_set_uint(OBJECT(&s->enet), "phy-num", s->phy_num, + &error_abort); + object_property_set_uint(OBJECT(&s->enet), "tx-ring-num", 3, &error_abort); + qemu_configure_nic_device(DEVICE(&s->enet), true, NULL); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->enet), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->enet), 0, + fsl_imx8mm_memmap[FSL_IMX8MM_ENET1].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->enet), 0, + qdev_get_gpio_in(gicdev, FSL_IMX8MM_ENET1_MAC_IRQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->enet), 1, + qdev_get_gpio_in(gicdev, FSL_IMX6_ENET1_MAC_1588_IRQ)); + /* SNVS */ if (!sysbus_realize(SYS_BUS_DEVICE(&s->snvs), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5: case FSL_IMX8MM_GPT1 ... FSL_IMX8MM_GPT6: case FSL_IMX8MM_ECSPI1 ... FSL_IMX8MM_ECSPI3: + case FSL_IMX8MM_ENET1: case FSL_IMX8MM_I2C1 ... FSL_IMX8MM_I2C4: case FSL_IMX8MM_PCIE1: case FSL_IMX8MM_PCIE_PHY1: @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) } } +static const Property fsl_imx8mm_properties[] = { + DEFINE_PROP_UINT32("fec1-phy-num", FslImx8mmState, phy_num, 0), + DEFINE_PROP_BOOL("fec1-phy-connected", FslImx8mmState, phy_connected, true), +}; + static void fsl_imx8mm_class_init(ObjectClass *oc, const void *data) { DeviceClass *dc = DEVICE_CLASS(oc); + device_class_set_props(dc, fsl_imx8mm_properties); dc->realize = fsl_imx8mm_realize; dc->desc = "i.MX 8MM SoC"; diff --git a/hw/arm/imx8mm-evk.c b/hw/arm/imx8mm-evk.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/imx8mm-evk.c +++ b/hw/arm/imx8mm-evk.c @@ -XXX,XX +XXX,XX @@ static void imx8mm_evk_init(MachineState *machine) s = FSL_IMX8MM(object_new_with_props(TYPE_FSL_IMX8MM, OBJECT(machine), "soc", &error_fatal, NULL)); + object_property_set_uint(OBJECT(s), "fec1-phy-num", 1, &error_fatal); sysbus_realize_and_unref(SYS_BUS_DEVICE(s), &error_fatal); memory_region_add_subregion(get_system_memory(), FSL_IMX8MM_RAM_START, diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx8mp_analog.h" #include "hw/misc/imx8mp_ccm.h" -#include "hw/or-irq.h" +#include "hw/net/imx_fec.h" +#include "hw/core/or-irq.h" #include "hw/pci-host/designware.h" #include "hw/pci-host/fsl_imx8m_phy.h" #include "hw/sd/sdhci.h" @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMXI2CState i2c[FSL_IMX8MM_NUM_I2CS]; IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; + IMXFECState enet; SDHCIState usdhc[FSL_IMX8MM_NUM_USDHCS]; IMX2WdtState wdt[FSL_IMX8MM_NUM_WDTS]; DesignwarePCIEHost pcie; FslImx8mPciePhyState pcie_phy; OrIRQState gpt5_gpt6_irq; + + uint32_t phy_num; + bool phy_connected; }; enum FslImx8mmMemoryRegions { @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_WDOG2_IRQ = 79, FSL_IMX8MM_WDOG3_IRQ = 10, + FSL_IMX8MM_ENET1_MAC_IRQ = 118, + FSL_IMX6_ENET1_MAC_1588_IRQ = 121, + FSL_IMX8MM_PCI_INTA_IRQ = 122, FSL_IMX8MM_PCI_INTB_IRQ = 123, FSL_IMX8MM_PCI_INTC_IRQ = 124, -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> It enables emulation of USB on iMX8MM Enables testing and debugging of USB drivers Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx8mm.c | 27 +++++++++++++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 6 ++++++ 3 files changed, 34 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM select SDHCI select PCI_EXPRESS_DESIGNWARE select PCI_EXPRESS_FSL_IMX8M_PHY + select USB_DWC3 select WDT_IMX2 config FSL_IMX8MM_EVK diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC); } + for (i = 0; i < FSL_IMX8MM_NUM_USBS; i++) { + g_autofree char *name = g_strdup_printf("usb%d", i); + object_initialize_child(obj, name, &s->usb[i], TYPE_USB_DWC3); + } + for (i = 0; i < FSL_IMX8MM_NUM_ECSPIS; i++) { g_autofree char *name = g_strdup_printf("spi%d", i + 1); object_initialize_child(obj, name, &s->spi[i], TYPE_IMX_SPI); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) qdev_get_gpio_in(gicdev, usdhc_table[i].irq)); } + /* USBs */ + for (i = 0; i < FSL_IMX8MM_NUM_USBS; i++) { + static const struct { + hwaddr addr; + unsigned int irq; + } usb_table[FSL_IMX8MM_NUM_USBS] = { + { fsl_imx8mm_memmap[FSL_IMX8MM_USB1].addr, FSL_IMX8MM_USB1_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_USB2].addr, FSL_IMX8MM_USB2_IRQ }, + }; + + qdev_prop_set_uint32(DEVICE(&s->usb[i].sysbus_xhci), "p2", 1); + qdev_prop_set_uint32(DEVICE(&s->usb[i].sysbus_xhci), "p3", 1); + qdev_prop_set_uint32(DEVICE(&s->usb[i].sysbus_xhci), "slots", 2); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->usb[i]), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->usb[i]), 0, usb_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->usb[i].sysbus_xhci), 0, + qdev_get_gpio_in(gicdev, usb_table[i].irq)); + } + /* ECSPIs */ for (i = 0; i < FSL_IMX8MM_NUM_ECSPIS; i++) { static const struct { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_OCRAM: case FSL_IMX8MM_SNVS_HP: case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4: + case FSL_IMX8MM_USB1 ... FSL_IMX8MM_USB2: case FSL_IMX8MM_USDHC1 ... FSL_IMX8MM_USDHC3: case FSL_IMX8MM_WDOG1 ... FSL_IMX8MM_WDOG3: /* device implemented and treated above */ diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/sd/sdhci.h" #include "hw/ssi/imx_spi.h" #include "hw/timer/imx_gpt.h" +#include "hw/usb/hcd-dwc3.h" #include "hw/watchdog/wdt_imx2.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ enum FslImx8mmConfiguration { FSL_IMX8MM_NUM_I2CS = 4, FSL_IMX8MM_NUM_IRQS = 128, FSL_IMX8MM_NUM_UARTS = 4, + FSL_IMX8MM_NUM_USBS = 2, FSL_IMX8MM_NUM_USDHCS = 3, FSL_IMX8MM_NUM_WDTS = 3, }; @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMXFECState enet; SDHCIState usdhc[FSL_IMX8MM_NUM_USDHCS]; IMX2WdtState wdt[FSL_IMX8MM_NUM_WDTS]; + USBDWC3 usb[FSL_IMX8MM_NUM_USBS]; DesignwarePCIEHost pcie; FslImx8mPciePhyState pcie_phy; OrIRQState gpt5_gpt6_irq; @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_I2C3_IRQ = 37, FSL_IMX8MM_I2C4_IRQ = 38, + FSL_IMX8MM_USB1_IRQ = 40, + FSL_IMX8MM_USB2_IRQ = 41, + FSL_IMX8MM_GPT1_IRQ = 55, FSL_IMX8MM_GPT2_IRQ = 54, FSL_IMX8MM_GPT3_IRQ = 53, -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> Added script that would validate the iMX8MM emulation by checking the linux console log. If it succeeds, it will return:- ok 1 test_imx8mm_evk.Imx8mmEvkMachine.test_aarch64_imx8mm_evk_usdhc Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Bernhard Beschow <shentey@gmail.com> [PMM: Add missing blank lines that flake8 wants] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 1 + tests/functional/aarch64/meson.build | 2 + tests/functional/aarch64/test_imx8mm_evk.py | 69 +++++++++++++++++++++ 3 files changed, 72 insertions(+) create mode 100755 tests/functional/aarch64/test_imx8mm_evk.py diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/arm/fsl-imx8mm.c F: hw/arm/imx8mm-evk.c F: include/hw/arm/fsl-imx8mm.h F: docs/system/arm/imx8m.rst +F: tests/functional/aarch64/test_imx8mm_evk.py MCIMX8MP-EVK / i.MX8MP M: Bernhard Beschow <shentey@gmail.com> diff --git a/tests/functional/aarch64/meson.build b/tests/functional/aarch64/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/functional/aarch64/meson.build +++ b/tests/functional/aarch64/meson.build @@ -XXX,XX +XXX,XX @@ test_aarch64_timeouts = { 'aspeed_ast2700a2' : 600, 'aspeed_ast2700fc' : 600, 'device_passthrough' : 720, + 'imx8mm_evk' : 240, 'imx8mp_evk' : 240, 'raspi4' : 480, 'reverse_debug' : 180, @@ -XXX,XX +XXX,XX @@ tests_aarch64_system_thorough = [ 'aspeed_ast2700fc', 'device_passthrough', 'hotplug_pci', + 'imx8mm_evk', 'imx8mp_evk', 'kvm', 'multiprocess', diff --git a/tests/functional/aarch64/test_imx8mm_evk.py b/tests/functional/aarch64/test_imx8mm_evk.py new file mode 100755 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/functional/aarch64/test_imx8mm_evk.py @@ -XXX,XX +XXX,XX @@ +#!/usr/bin/env python3 +# +# Functional test that boots a Linux kernel and checks the console +# +# SPDX-License-Identifier: GPL-2.0-or-later + +from qemu_test import LinuxKernelTest, Asset + + +class Imx8mmEvkMachine(LinuxKernelTest): + + ASSET_IMAGE = Asset( + ('https://cloud.debian.org/images/cloud/bookworm/20231210-1590/' + 'debian-12-generic-arm64-20231210-1590.tar.xz'), + '7ebf1577b32d5af6204df74b54ca2e4675de9b5a9fa14f3ff70b88eeb7b3b359') + + KERNEL_OFFSET = 0x51000000 + KERNEL_SIZE = 32622528 + INITRD_OFFSET = 0x76000000 + INITRD_SIZE = 30987766 + DTB_OFFSET = 0x64DB5000 + DTB_SIZE = 36812 + + def extract(self, in_path, out_path, offset, size): + try: + with open(in_path, "rb") as source: + source.seek(offset) + data = source.read(size) + with open(out_path, "wb") as target: + target.write(data) + except (IOError, ValueError) as e: + self.log.error(f"Failed to extract {out_path}: {e}") + raise + + def setUp(self): + super().setUp() + + self.image_path = self.scratch_file("disk.raw") + self.kernel_path = self.scratch_file("linux") + self.initrd_path = self.scratch_file("initrd.zstd") + self.dtb_path = self.scratch_file("imx8mm-evk.dtb") + + self.archive_extract(self.ASSET_IMAGE) + self.extract(self.image_path, self.kernel_path, + self.KERNEL_OFFSET, self.KERNEL_SIZE) + self.extract(self.image_path, self.initrd_path, + self.INITRD_OFFSET, self.INITRD_SIZE) + self.extract(self.image_path, self.dtb_path, + self.DTB_OFFSET, self.DTB_SIZE) + + def test_aarch64_imx8mm_evk_usdhc(self): + self.require_accelerator("tcg") + self.set_machine('imx8mm-evk') + self.vm.set_console(console_index=1) + self.vm.add_args('-m', '2G', + '-smp', '4', + '-kernel', self.kernel_path, + '-initrd', self.initrd_path, + '-dtb', self.dtb_path, + '-append', 'root=/dev/mmcblk2p1', + '-drive', f'file={self.image_path},if=sd,bus=2,' + 'format=raw,id=mmcblk2,snapshot=on') + + self.vm.launch() + self.wait_for_console_pattern('Welcome to ') + + +if __name__ == '__main__': + LinuxKernelTest.main() -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> As mentioned by Richard in [*]: We don't actually need any specific endianness here, because every byte has the same value. So we could simply drop MO_TE. That would produce a store in host-endianness, which will be fractionally more efficient on some hosts. [*] https://lore.kernel.org/qemu-devel/d64d3576-9188-4e74-afdc-3492c9feb8e0@linaro.org/ Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20260414005348.4767-2-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/helper-a64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/tcg/helper-a64.c b/target/arm/tcg/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/helper-a64.c +++ b/target/arm/tcg/helper-a64.c @@ -XXX,XX +XXX,XX @@ static uint64_t set_step_tags(CPUARMState *env, uint64_t toaddr, * the page dirty and will use the fast path. */ uint64_t repldata = data * 0x0101010101010101ULL; - MemOpIdx oi16 = make_memop_idx(MO_TE | MO_128, memidx); + MemOpIdx oi16 = make_memop_idx(MO_128, memidx); cpu_st16_mmu(env, toaddr, int128_make128(repldata, repldata), oi16, ra); mte_mops_set_tags(env, toaddr, 16, *mtedesc); return 16; -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Extract the implicit MO_TE definition in order to replace it in the next commit. Mechanical change using: $ for n in UW UL UQ UO SW SL SQ; do \ sed -i -e "s/MO_TE$n/MO_TE | MO_$n/" \ $(git grep -l MO_TE$n target/arm); \ done Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-3-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/m_helper.c | 6 +-- target/arm/tcg/mve_helper.c | 79 ++++++++++++++++++++----------------- 2 files changed, 45 insertions(+), 40 deletions(-) diff --git a/target/arm/tcg/m_helper.c b/target/arm/tcg/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/m_helper.c +++ b/target/arm/tcg/m_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest) /* Note that these stores can throw exceptions on MPU faults */ ARMMMUIdx mmu_idx = arm_mmu_idx(env); - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, arm_to_core_mmu_idx(mmu_idx)); cpu_stl_mmu(env, sp, nextinst, oi, GETPC()); cpu_stl_mmu(env, sp + 4, saved_psr, oi, GETPC()); @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) bool lspact = env->v7m.fpccr[s] & R_V7M_FPCCR_LSPACT_MASK; uintptr_t ra = GETPC(); ARMMMUIdx mmu_idx = arm_mmu_idx(env); - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, arm_to_core_mmu_idx(mmu_idx)); assert(env->v7m.secure); @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlldm)(CPUARMState *env, uint32_t fptr) ARMCPU *cpu = env_archcpu(env); uintptr_t ra = GETPC(); ARMMMUIdx mmu_idx = arm_mmu_idx(env); - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, arm_to_core_mmu_idx(mmu_idx)); /* fptr is the value of Rn, the frame pointer we load the FP regs from */ diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mve_helper.c +++ b/target/arm/tcg/mve_helper.c @@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env) } DO_VLDR(vldrb, MO_UB, 1, uint8_t, ldb, 1, uint8_t) -DO_VLDR(vldrh, MO_TEUW, 2, uint16_t, ldw, 2, uint16_t) -DO_VLDR(vldrw, MO_TEUL, 4, uint32_t, ldl, 4, uint32_t) +DO_VLDR(vldrh, MO_TE | MO_UW, 2, uint16_t, ldw, 2, uint16_t) +DO_VLDR(vldrw, MO_TE | MO_UL, 4, uint32_t, ldl, 4, uint32_t) DO_VSTR(vstrb, MO_UB, 1, stb, 1, uint8_t) -DO_VSTR(vstrh, MO_TEUW, 2, stw, 2, uint16_t) -DO_VSTR(vstrw, MO_TEUL, 4, stl, 4, uint32_t) +DO_VSTR(vstrh, MO_TE | MO_UW, 2, stw, 2, uint16_t) +DO_VSTR(vstrw, MO_TE | MO_UL, 4, stl, 4, uint32_t) DO_VLDR(vldrb_sh, MO_SB, 1, int8_t, ldb, 2, int16_t) DO_VLDR(vldrb_sw, MO_SB, 1, int8_t, ldb, 4, int32_t) DO_VLDR(vldrb_uh, MO_UB, 1, uint8_t, ldb, 2, uint16_t) DO_VLDR(vldrb_uw, MO_UB, 1, uint8_t, ldb, 4, uint32_t) -DO_VLDR(vldrh_sw, MO_TESW, 2, int16_t, ldw, 4, int32_t) -DO_VLDR(vldrh_uw, MO_TEUW, 2, uint16_t, ldw, 4, uint32_t) +DO_VLDR(vldrh_sw, MO_TE | MO_SW, 2, int16_t, ldw, 4, int32_t) +DO_VLDR(vldrh_uw, MO_TE | MO_UW, 2, uint16_t, ldw, 4, uint32_t) DO_VSTR(vstrb_h, MO_UB, 1, stb, 2, int16_t) DO_VSTR(vstrb_w, MO_UB, 1, stb, 4, int32_t) -DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t) +DO_VSTR(vstrh_w, MO_TE | MO_UW, 2, stw, 4, int32_t) #undef DO_VLDR #undef DO_VSTR @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (e = 0; e < 16 / 4; e++, mask >>= 4, eci_mask >>= 4) { \ if (!(eci_mask & 1)) { \ continue; \ @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (e = 0; e < 16 / 4; e++, mask >>= 4, eci_mask >>= 4) { \ if (!(eci_mask & 1)) { \ continue; \ @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t) DO_VLDR_SG(vldrb_sg_sh, MO_SB, int8_t, ldb, 2, int16_t, uint16_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_sw, MO_SB, int8_t, ldb, 4, int32_t, uint32_t, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_sw, MO_TESW, int16_t, ldw, 4, int32_t, uint32_t, ADDR_ADD, false) +DO_VLDR_SG(vldrh_sg_sw, MO_TE | MO_SW, int16_t, ldw, 4, + int32_t, uint32_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_ub, MO_UB, uint8_t, ldb, 1, uint8_t, uint8_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_uh, MO_UB, uint8_t, ldb, 2, uint16_t, uint16_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_uw, MO_UB, uint8_t, ldb, 4, uint32_t, uint32_t, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_uh, MO_TEUW, uint16_t, ldw, 2, uint16_t, uint16_t, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_uw, MO_TEUW, uint16_t, ldw, 4, uint32_t, uint32_t, ADDR_ADD, false) -DO_VLDR_SG(vldrw_sg_uw, MO_TEUL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD, false) +DO_VLDR_SG(vldrh_sg_uh, MO_TE | MO_UW, uint16_t, ldw, 2, + uint16_t, uint16_t, ADDR_ADD, false) +DO_VLDR_SG(vldrh_sg_uw, MO_TE | MO_UW, uint16_t, ldw, 4, + uint32_t, uint32_t, ADDR_ADD, false) +DO_VLDR_SG(vldrw_sg_uw, MO_TE | MO_UL, uint32_t, ldl, 4, + uint32_t, uint32_t, ADDR_ADD, false) DO_VLDR64_SG(vldrd_sg_ud, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_os_sw, MO_TESW, int16_t, ldw, 4, +DO_VLDR_SG(vldrh_sg_os_sw, MO_TE | MO_SW, int16_t, ldw, 4, int32_t, uint32_t, ADDR_ADD_OSH, false) -DO_VLDR_SG(vldrh_sg_os_uh, MO_TEUW, uint16_t, ldw, 2, +DO_VLDR_SG(vldrh_sg_os_uh, MO_TE | MO_UW, uint16_t, ldw, 2, uint16_t, uint16_t, ADDR_ADD_OSH, false) -DO_VLDR_SG(vldrh_sg_os_uw, MO_TEUW, uint16_t, ldw, 4, +DO_VLDR_SG(vldrh_sg_os_uw, MO_TE | MO_UW, uint16_t, ldw, 4, uint32_t, uint32_t, ADDR_ADD_OSH, false) -DO_VLDR_SG(vldrw_sg_os_uw, MO_TEUL, uint32_t, ldl, 4, +DO_VLDR_SG(vldrw_sg_os_uw, MO_TE | MO_UL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD_OSW, false) DO_VLDR64_SG(vldrd_sg_os_ud, ADDR_ADD_OSD, false) DO_VSTR_SG(vstrb_sg_ub, MO_UB, stb, 1, uint8_t, ADDR_ADD, false) DO_VSTR_SG(vstrb_sg_uh, MO_UB, stb, 2, uint16_t, ADDR_ADD, false) DO_VSTR_SG(vstrb_sg_uw, MO_UB, stb, 4, uint32_t, ADDR_ADD, false) -DO_VSTR_SG(vstrh_sg_uh, MO_TEUW, stw, 2, uint16_t, ADDR_ADD, false) -DO_VSTR_SG(vstrh_sg_uw, MO_TEUW, stw, 4, uint32_t, ADDR_ADD, false) -DO_VSTR_SG(vstrw_sg_uw, MO_TEUL, stl, 4, uint32_t, ADDR_ADD, false) +DO_VSTR_SG(vstrh_sg_uh, MO_TE | MO_UW, stw, 2, uint16_t, ADDR_ADD, false) +DO_VSTR_SG(vstrh_sg_uw, MO_TE | MO_UW, stw, 4, uint32_t, ADDR_ADD, false) +DO_VSTR_SG(vstrw_sg_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD, false) DO_VSTR64_SG(vstrd_sg_ud, ADDR_ADD, false) -DO_VSTR_SG(vstrh_sg_os_uh, MO_TEUW, stw, 2, uint16_t, ADDR_ADD_OSH, false) -DO_VSTR_SG(vstrh_sg_os_uw, MO_TEUW, stw, 4, uint32_t, ADDR_ADD_OSH, false) -DO_VSTR_SG(vstrw_sg_os_uw, MO_TEUL, stl, 4, uint32_t, ADDR_ADD_OSW, false) +DO_VSTR_SG(vstrh_sg_os_uh, MO_TE | MO_UW, stw, 2, uint16_t, ADDR_ADD_OSH, false) +DO_VSTR_SG(vstrh_sg_os_uw, MO_TE | MO_UW, stw, 4, uint32_t, ADDR_ADD_OSH, false) +DO_VSTR_SG(vstrw_sg_os_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD_OSW, false) DO_VSTR64_SG(vstrd_sg_os_ud, ADDR_ADD_OSD, false) -DO_VLDR_SG(vldrw_sg_wb_uw, MO_TEUL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD, true) +DO_VLDR_SG(vldrw_sg_wb_uw, MO_TE | MO_UL, uint32_t, ldl, 4, + uint32_t, uint32_t, ADDR_ADD, true) DO_VLDR64_SG(vldrd_sg_wb_ud, ADDR_ADD, true) -DO_VSTR_SG(vstrw_sg_wb_uw, MO_TEUL, stl, 4, uint32_t, ADDR_ADD, true) +DO_VSTR_SG(vstrw_sg_wb_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD, true) DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) /* @@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) static const uint8_t off[4] = { O1, O2, O3, O4 }; \ uint32_t addr, data; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) int y; /* y counts 0 2 0 2 */ \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0, y = 0; beat < 4; beat++, mask >>= 4, y ^= 2) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) uint32_t *qd; \ int y; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9) uint32_t addr, data; \ uint8_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9) int e; \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9) uint32_t addr, data; \ uint32_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20) static const uint8_t off[4] = { O1, O2, O3, O4 }; \ uint32_t addr, data; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20) int y; /* y counts 0 2 0 2 */ \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0, y = 0; beat < 4; beat++, mask >>= 4, y ^= 2) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20) uint32_t *qd; \ int y; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9) uint32_t addr, data; \ uint8_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9) int e; \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9) uint32_t addr, data; \ uint32_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-4-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/mve_helper.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mve_helper.c +++ b/target/arm/tcg/mve_helper.c @@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env) uint16_t eci_mask = mve_eci_mask(env); \ unsigned b, e; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MFLAG | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + mmu_idx); \ /* \ * R_SXTM allows the dest reg to become UNKNOWN for abandoned \ * beats so we don't care if we update part of the dest and \ @@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env) uint16_t mask = mve_element_mask(env); \ unsigned b, e; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MFLAG | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + mmu_idx); \ for (b = 0, e = 0; b < 16; b += ESIZE, e++) { \ if (mask & (1 << b)) { \ cpu_##STTYPE##_mmu(env, addr, d[H##ESIZE(e)], oi, GETPC()); \ @@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env) } DO_VLDR(vldrb, MO_UB, 1, uint8_t, ldb, 1, uint8_t) -DO_VLDR(vldrh, MO_TE | MO_UW, 2, uint16_t, ldw, 2, uint16_t) -DO_VLDR(vldrw, MO_TE | MO_UL, 4, uint32_t, ldl, 4, uint32_t) +DO_VLDR(vldrh, MO_UW, 2, uint16_t, ldw, 2, uint16_t) +DO_VLDR(vldrw, MO_UL, 4, uint32_t, ldl, 4, uint32_t) DO_VSTR(vstrb, MO_UB, 1, stb, 1, uint8_t) -DO_VSTR(vstrh, MO_TE | MO_UW, 2, stw, 2, uint16_t) -DO_VSTR(vstrw, MO_TE | MO_UL, 4, stl, 4, uint32_t) +DO_VSTR(vstrh, MO_UW, 2, stw, 2, uint16_t) +DO_VSTR(vstrw, MO_UL, 4, stl, 4, uint32_t) DO_VLDR(vldrb_sh, MO_SB, 1, int8_t, ldb, 2, int16_t) DO_VLDR(vldrb_sw, MO_SB, 1, int8_t, ldb, 4, int32_t) DO_VLDR(vldrb_uh, MO_UB, 1, uint8_t, ldb, 2, uint16_t) DO_VLDR(vldrb_uw, MO_UB, 1, uint8_t, ldb, 4, uint32_t) -DO_VLDR(vldrh_sw, MO_TE | MO_SW, 2, int16_t, ldw, 4, int32_t) -DO_VLDR(vldrh_uw, MO_TE | MO_UW, 2, uint16_t, ldw, 4, uint32_t) +DO_VLDR(vldrh_sw, MO_SW, 2, int16_t, ldw, 4, int32_t) +DO_VLDR(vldrh_uw, MO_UW, 2, uint16_t, ldw, 4, uint32_t) DO_VSTR(vstrb_h, MO_UB, 1, stb, 2, int16_t) DO_VSTR(vstrb_w, MO_UB, 1, stb, 4, int32_t) -DO_VSTR(vstrh_w, MO_TE | MO_UW, 2, stw, 4, int32_t) +DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) #undef DO_VLDR #undef DO_VSTR -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-5-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/mve_helper.c | 43 +++++++++++++++++-------------------- 1 file changed, 20 insertions(+), 23 deletions(-) diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mve_helper.c +++ b/target/arm/tcg/mve_helper.c @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MFLAG | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + mmu_idx); \ for (e = 0; e < 16 / ESIZE; e++, mask >>= ESIZE, eci_mask >>= ESIZE) { \ if (!(eci_mask & 1)) { \ continue; \ @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MFLAG | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + mmu_idx); \ for (e = 0; e < 16 / ESIZE; e++, mask >>= ESIZE, eci_mask >>= ESIZE) { \ if (!(eci_mask & 1)) { \ continue; \ @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) DO_VLDR_SG(vldrb_sg_sh, MO_SB, int8_t, ldb, 2, int16_t, uint16_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_sw, MO_SB, int8_t, ldb, 4, int32_t, uint32_t, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_sw, MO_TE | MO_SW, int16_t, ldw, 4, - int32_t, uint32_t, ADDR_ADD, false) +DO_VLDR_SG(vldrh_sg_sw, MO_SW, int16_t, ldw, 4, int32_t, uint32_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_ub, MO_UB, uint8_t, ldb, 1, uint8_t, uint8_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_uh, MO_UB, uint8_t, ldb, 2, uint16_t, uint16_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_uw, MO_UB, uint8_t, ldb, 4, uint32_t, uint32_t, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_uh, MO_TE | MO_UW, uint16_t, ldw, 2, - uint16_t, uint16_t, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_uw, MO_TE | MO_UW, uint16_t, ldw, 4, - uint32_t, uint32_t, ADDR_ADD, false) -DO_VLDR_SG(vldrw_sg_uw, MO_TE | MO_UL, uint32_t, ldl, 4, - uint32_t, uint32_t, ADDR_ADD, false) +DO_VLDR_SG(vldrh_sg_uh, MO_UW, uint16_t, ldw, 2, uint16_t, uint16_t, ADDR_ADD, false) +DO_VLDR_SG(vldrh_sg_uw, MO_UW, uint16_t, ldw, 4, uint32_t, uint32_t, ADDR_ADD, false) +DO_VLDR_SG(vldrw_sg_uw, MO_UL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD, false) DO_VLDR64_SG(vldrd_sg_ud, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_os_sw, MO_TE | MO_SW, int16_t, ldw, 4, +DO_VLDR_SG(vldrh_sg_os_sw, MO_SW, int16_t, ldw, 4, int32_t, uint32_t, ADDR_ADD_OSH, false) -DO_VLDR_SG(vldrh_sg_os_uh, MO_TE | MO_UW, uint16_t, ldw, 2, +DO_VLDR_SG(vldrh_sg_os_uh, MO_UW, uint16_t, ldw, 2, uint16_t, uint16_t, ADDR_ADD_OSH, false) -DO_VLDR_SG(vldrh_sg_os_uw, MO_TE | MO_UW, uint16_t, ldw, 4, +DO_VLDR_SG(vldrh_sg_os_uw, MO_UW, uint16_t, ldw, 4, uint32_t, uint32_t, ADDR_ADD_OSH, false) -DO_VLDR_SG(vldrw_sg_os_uw, MO_TE | MO_UL, uint32_t, ldl, 4, +DO_VLDR_SG(vldrw_sg_os_uw, MO_UL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD_OSW, false) DO_VLDR64_SG(vldrd_sg_os_ud, ADDR_ADD_OSD, false) DO_VSTR_SG(vstrb_sg_ub, MO_UB, stb, 1, uint8_t, ADDR_ADD, false) DO_VSTR_SG(vstrb_sg_uh, MO_UB, stb, 2, uint16_t, ADDR_ADD, false) DO_VSTR_SG(vstrb_sg_uw, MO_UB, stb, 4, uint32_t, ADDR_ADD, false) -DO_VSTR_SG(vstrh_sg_uh, MO_TE | MO_UW, stw, 2, uint16_t, ADDR_ADD, false) -DO_VSTR_SG(vstrh_sg_uw, MO_TE | MO_UW, stw, 4, uint32_t, ADDR_ADD, false) -DO_VSTR_SG(vstrw_sg_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD, false) +DO_VSTR_SG(vstrh_sg_uh, MO_UW, stw, 2, uint16_t, ADDR_ADD, false) +DO_VSTR_SG(vstrh_sg_uw, MO_UW, stw, 4, uint32_t, ADDR_ADD, false) +DO_VSTR_SG(vstrw_sg_uw, MO_UL, stl, 4, uint32_t, ADDR_ADD, false) DO_VSTR64_SG(vstrd_sg_ud, ADDR_ADD, false) -DO_VSTR_SG(vstrh_sg_os_uh, MO_TE | MO_UW, stw, 2, uint16_t, ADDR_ADD_OSH, false) -DO_VSTR_SG(vstrh_sg_os_uw, MO_TE | MO_UW, stw, 4, uint32_t, ADDR_ADD_OSH, false) -DO_VSTR_SG(vstrw_sg_os_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD_OSW, false) +DO_VSTR_SG(vstrh_sg_os_uh, MO_UW, stw, 2, uint16_t, ADDR_ADD_OSH, false) +DO_VSTR_SG(vstrh_sg_os_uw, MO_UW, stw, 4, uint32_t, ADDR_ADD_OSH, false) +DO_VSTR_SG(vstrw_sg_os_uw, MO_UL, stl, 4, uint32_t, ADDR_ADD_OSW, false) DO_VSTR64_SG(vstrd_sg_os_ud, ADDR_ADD_OSD, false) -DO_VLDR_SG(vldrw_sg_wb_uw, MO_TE | MO_UL, uint32_t, ldl, 4, - uint32_t, uint32_t, ADDR_ADD, true) +DO_VLDR_SG(vldrw_sg_wb_uw, MO_UL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD, true) DO_VLDR64_SG(vldrd_sg_wb_ud, ADDR_ADD, true) -DO_VSTR_SG(vstrw_sg_wb_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD, true) +DO_VSTR_SG(vstrw_sg_wb_uw, MO_UL, stl, 4, uint32_t, ADDR_ADD, true) DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) /* -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-6-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 6 ++++++ target/arm/tcg/mve_helper.c | 3 ++- 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ #include "exec/hwaddr.h" #include "exec/vaddr.h" #include "exec/breakpoint.h" +#include "exec/memop.h" #include "accel/tcg/tb-cpu-state.h" #include "hw/core/registerfields.h" #include "tcg/tcg-gvec-desc.h" @@ -XXX,XX +XXX,XX @@ #define BANK_HYP 6 #define BANK_MON 7 +static inline MemOp mo_endian(CPUARMState *env) +{ + return EX_TBFLAG_ANY(env->hflags, BE_DATA) ? MO_BE : MO_LE; +} + static inline int arm_env_mmu_index(CPUARMState *env) { return EX_TBFLAG_ANY(env->hflags, MMUIDX); diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mve_helper.c +++ b/target/arm/tcg/mve_helper.c @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (e = 0; e < 16 / 4; e++, mask >>= 4, eci_mask >>= 4) { \ if (!(eci_mask & 1)) { \ continue; \ -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-7-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/mve_helper.c | 47 +++++++++++++++++++++++-------------- 1 file changed, 30 insertions(+), 17 deletions(-) diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mve_helper.c +++ b/target/arm/tcg/mve_helper.c @@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env) uint16_t eci_mask = mve_eci_mask(env); \ unsigned b, e; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MFLAG | MO_ALIGN, \ mmu_idx); \ /* \ * R_SXTM allows the dest reg to become UNKNOWN for abandoned \ @@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env) uint16_t mask = mve_element_mask(env); \ unsigned b, e; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MFLAG | MO_ALIGN, \ mmu_idx); \ for (b = 0, e = 0; b < 16; b += ESIZE, e++) { \ if (mask & (1 << b)) { \ @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MFLAG | MO_ALIGN, \ mmu_idx); \ for (e = 0; e < 16 / ESIZE; e++, mask >>= ESIZE, eci_mask >>= ESIZE) { \ if (!(eci_mask & 1)) { \ @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MFLAG | MO_ALIGN, \ mmu_idx); \ for (e = 0; e < 16 / ESIZE; e++, mask >>= ESIZE, eci_mask >>= ESIZE) { \ if (!(eci_mask & 1)) { \ @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (e = 0; e < 16 / 4; e++, mask >>= 4, eci_mask >>= 4) { \ if (!(eci_mask & 1)) { \ continue; \ @@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) static const uint8_t off[4] = { O1, O2, O3, O4 }; \ uint32_t addr, data; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) int y; /* y counts 0 2 0 2 */ \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0, y = 0; beat < 4; beat++, mask >>= 4, y ^= 2) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) uint32_t *qd; \ int y; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9) uint32_t addr, data; \ uint8_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9) int e; \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9) uint32_t addr, data; \ uint32_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20) static const uint8_t off[4] = { O1, O2, O3, O4 }; \ uint32_t addr, data; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20) int y; /* y counts 0 2 0 2 */ \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0, y = 0; beat < 4; beat++, mask >>= 4, y ^= 2) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20) uint32_t *qd; \ int y; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9) uint32_t addr, data; \ uint8_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9) int e; \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9) uint32_t addr, data; \ uint32_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-8-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/meson.build | 3 ++- target/arm/tcg/mve_helper.c | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/target/arm/tcg/meson.build b/target/arm/tcg/meson.build index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/meson.build +++ b/target/arm/tcg/meson.build @@ -XXX,XX +XXX,XX @@ arm_ss.add(when: 'TARGET_AARCH64', if_false: files('stubs32.c')) arm_ss.add(files( 'cpu32.c', 'm_helper.c', - 'mve_helper.c', )) arm_ss.add(when: 'TARGET_AARCH64', if_true: files( @@ -XXX,XX +XXX,XX @@ arm_common_system_ss.add( 'debug.c', 'hflags.c', 'gengvec.c', + 'mve_helper.c', 'neon_helper.c', 'op_helper.c', 'psci.c', @@ -XXX,XX +XXX,XX @@ arm_user_ss.add( 'debug.c', 'gengvec.c', 'hflags.c', + 'mve_helper.c', 'neon_helper.c', 'op_helper.c', 'tlb_helper.c', diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mve_helper.c +++ b/target/arm/tcg/mve_helper.c @@ -XXX,XX +XXX,XX @@ #include "helper-mve.h" #include "internals.h" #include "vec_internal.h" -#include "accel/tcg/cpu-ldst.h" +#include "accel/tcg/cpu-ldst-common.h" #include "tcg/tcg.h" #include "fpu/softfloat.h" #include "crypto/clmul.h" -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-9-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/m_helper.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/target/arm/tcg/m_helper.c b/target/arm/tcg/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/m_helper.c +++ b/target/arm/tcg/m_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest) /* Note that these stores can throw exceptions on MPU faults */ ARMMMUIdx mmu_idx = arm_mmu_idx(env); - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, arm_to_core_mmu_idx(mmu_idx)); cpu_stl_mmu(env, sp, nextinst, oi, GETPC()); cpu_stl_mmu(env, sp + 4, saved_psr, oi, GETPC()); @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) bool lspact = env->v7m.fpccr[s] & R_V7M_FPCCR_LSPACT_MASK; uintptr_t ra = GETPC(); ARMMMUIdx mmu_idx = arm_mmu_idx(env); - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, arm_to_core_mmu_idx(mmu_idx)); assert(env->v7m.secure); @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlldm)(CPUARMState *env, uint32_t fptr) ARMCPU *cpu = env_archcpu(env); uintptr_t ra = GETPC(); ARMMMUIdx mmu_idx = arm_mmu_idx(env); - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, arm_to_core_mmu_idx(mmu_idx)); /* fptr is the value of Rn, the frame pointer we load the FP regs from */ -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-10-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/m_helper.c | 2 +- target/arm/tcg/meson.build | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/target/arm/tcg/m_helper.c b/target/arm/tcg/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/m_helper.c +++ b/target/arm/tcg/m_helper.c @@ -XXX,XX +XXX,XX @@ #include "qemu/log.h" #include "exec/page-protection.h" #ifdef CONFIG_TCG -#include "accel/tcg/cpu-ldst.h" +#include "accel/tcg/cpu-ldst-common.h" #include "semihosting/common-semi.h" #endif #if !defined(CONFIG_USER_ONLY) diff --git a/target/arm/tcg/meson.build b/target/arm/tcg/meson.build index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/meson.build +++ b/target/arm/tcg/meson.build @@ -XXX,XX +XXX,XX @@ arm_ss.add(when: 'TARGET_AARCH64', if_false: files('stubs32.c')) arm_ss.add(files( 'cpu32.c', - 'm_helper.c', )) arm_ss.add(when: 'TARGET_AARCH64', if_true: files( @@ -XXX,XX +XXX,XX @@ arm_common_system_ss.add( 'debug.c', 'hflags.c', 'gengvec.c', + 'm_helper.c', 'mve_helper.c', 'neon_helper.c', 'op_helper.c', @@ -XXX,XX +XXX,XX @@ arm_user_ss.add( 'debug.c', 'gengvec.c', 'hflags.c', + 'm_helper.c', 'mve_helper.c', 'neon_helper.c', 'op_helper.c', -- 2.43.0 From: Thomas Huth <thuth@redhat.com> When writing to this register, QEMU currently aborts: $ echo "readl 0x10000018" | ./qemu-system-arm -audiodev none,id=snd0 \ -M integratorcp,accel=qtest,audiodev=snd0 -display none -qtest stdio [I 0.000000] OPENED [R +0.001907] readl 0x10000018 qemu: hardware error: integratorcm_read: CM_LMBUSCNT [...] Aborted (core dumped) This is bad, a guest should ideally never be able to kill QEMU like this. Now, according to the "Intergrator/CP User Guide" from: https://developer.arm.com/documentation/dui0159/b/porting-integrator-ap-and-im-pd1/registers "The Integrator/AP CM_LMBUSCNT has been removed." That means this register does not seem to be implemented on real CP boards at all, only for older AP boards. Thus it should be fine if we simply ignore this register in QEMU and handle it like all other unimplemented registers in the "default" handler of the case statement. Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3407 Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20260420064933.64765-1-thuth@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/integratorcp.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/hw/arm/integratorcp.c b/hw/arm/integratorcp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/integratorcp.c +++ b/hw/arm/integratorcp.c @@ -XXX,XX +XXX,XX @@ static uint64_t integratorcm_read(void *opaque, hwaddr offset, } else { return s->cm_lock; } - case 6: /* CM_LMBUSCNT */ - /* ??? High frequency timer. */ - hw_error("integratorcm_read: CM_LMBUSCNT"); case 7: /* CM_AUXOSC */ return s->cm_auxosc; case 8: /* CM_SDRAM */ -- 2.43.0 include/hw/arm/primecell.h used to be more expansive, but now the only thing it defines is the ARM_SYSCTL_GPIO_* constants for the GPIO lines for the arm-sysctl system-control device used on the Realview, Versatile and Versatile Express boards. Replace it with a header file specific to that device. virt.c and vmapple.c included primecell.h despite not using the constants it defined; there we can simply drop the include entirely. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20260416172627.690396-1-peter.maydell@linaro.org --- MAINTAINERS | 2 +- hw/arm/realview.c | 2 +- hw/arm/vexpress.c | 2 +- hw/arm/virt.c | 1 - hw/misc/arm_sysctl.c | 2 +- hw/vmapple/vmapple.c | 1 - include/hw/arm/primecell.h | 12 ------------ include/hw/misc/arm_sysctl.h | 16 ++++++++++++++++ 8 files changed, 20 insertions(+), 18 deletions(-) delete mode 100644 include/hw/arm/primecell.h create mode 100644 include/hw/misc/arm_sysctl.h diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/ssi/pl022.c F: include/hw/ssi/pl022.h F: hw/rtc/pl031.c F: include/hw/rtc/pl031.h -F: include/hw/arm/primecell.h F: hw/timer/cmsdk-apb-timer.c F: include/hw/timer/cmsdk-apb-timer.h F: tests/qtest/cmsdk-apb-timer-test.c @@ -XXX,XX +XXX,XX @@ F: hw/*/versatile* F: hw/i2c/arm_sbcon_i2c.c F: include/hw/i2c/arm_sbcon_i2c.h F: hw/misc/arm_sysctl.c +F: include/hw/misc/arm_sysctl.h F: docs/system/arm/versatile.rst Virt diff --git a/hw/arm/realview.c b/hw/arm/realview.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/realview.c +++ b/hw/arm/realview.c @@ -XXX,XX +XXX,XX @@ #include "target/arm/cpu.h" #include "hw/core/sysbus.h" #include "hw/arm/boot.h" -#include "hw/arm/primecell.h" #include "hw/arm/machines-qom.h" #include "hw/core/split-irq.h" +#include "hw/misc/arm_sysctl.h" #include "hw/net/lan9118.h" #include "hw/net/smc91c111.h" #include "hw/pci/pci.h" diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/vexpress.c +++ b/hw/arm/vexpress.c @@ -XXX,XX +XXX,XX @@ #include "qemu/datadir.h" #include "hw/core/sysbus.h" #include "hw/arm/boot.h" -#include "hw/arm/primecell.h" #include "hw/arm/machines-qom.h" +#include "hw/misc/arm_sysctl.h" #include "hw/net/lan9118.h" #include "hw/i2c/i2c.h" #include "net/net.h" diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ #include "monitor/qdev.h" #include "hw/core/sysbus.h" #include "hw/arm/boot.h" -#include "hw/arm/primecell.h" #include "hw/arm/virt.h" #include "hw/arm/machines-qom.h" #include "hw/block/flash.h" diff --git a/hw/misc/arm_sysctl.c b/hw/misc/arm_sysctl.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/arm_sysctl.c +++ b/hw/misc/arm_sysctl.c @@ -XXX,XX +XXX,XX @@ #include "system/runstate.h" #include "qemu/bitops.h" #include "hw/core/sysbus.h" +#include "hw/misc/arm_sysctl.h" #include "migration/vmstate.h" -#include "hw/arm/primecell.h" #include "qemu/log.h" #include "qemu/module.h" #include "qom/object.h" diff --git a/hw/vmapple/vmapple.c b/hw/vmapple/vmapple.c index XXXXXXX..XXXXXXX 100644 --- a/hw/vmapple/vmapple.c +++ b/hw/vmapple/vmapple.c @@ -XXX,XX +XXX,XX @@ #include "hw/core/sysbus.h" #include "hw/usb/usb.h" #include "hw/arm/boot.h" -#include "hw/arm/primecell.h" #include "hw/char/pl011.h" #include "hw/intc/arm_gic.h" #include "hw/intc/arm_gicv3_common.h" diff --git a/include/hw/arm/primecell.h b/include/hw/arm/primecell.h deleted file mode 100644 index XXXXXXX..XXXXXXX --- a/include/hw/arm/primecell.h +++ /dev/null @@ -XXX,XX +XXX,XX @@ -#ifndef PRIMECELL_H -#define PRIMECELL_H - -/* Declarations for ARM PrimeCell based periperals. */ -/* Also includes some devices that are currently only used by the - ARM boards. */ - -/* arm_sysctl GPIO lines */ -#define ARM_SYSCTL_GPIO_MMC_WPROT 0 -#define ARM_SYSCTL_GPIO_MMC_CARDIN 1 - -#endif diff --git a/include/hw/misc/arm_sysctl.h b/include/hw/misc/arm_sysctl.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/arm_sysctl.h @@ -XXX,XX +XXX,XX @@ +/* + * Status and system control registers for ARM RealView/Versatile boards. + * + * Copyright (c) Linaro Ltd + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#ifndef HW_MISC_ARM_SYSCTL_H +#define HW_MISC_ARM_SYSCTL_H + +/* arm_sysctl inbound GPIO lines */ +#define ARM_SYSCTL_GPIO_MMC_WPROT 0 +#define ARM_SYSCTL_GPIO_MMC_CARDIN 1 + +#endif -- 2.43.0 If we create a normally-AArch64 CPU and configure it with aarch64=off, this will by default leave all the AArch64 ID register values in its ARMISARegisters struct untouched. That in turn means that tests of cpu_isar_feature(aa64_something, cpu) will return true. Until now we have had a design policy that you shouldn't check an aa64_ feature unless you know that the CPU has AArch64; but this is quite fragile as it's easy to forget and only causes a problem in the corner case where AArch64 was turned off. In particular, when we extend the ability to disable AArch64 from only KVM to also TCG there are many more aa64 feature check points which we would otherwise have to audit for whether they needed to be guarded with a check on ARM_FEATURE_AARCH64. Instead, make the CPU realize function zero out all the 64-bit ID registers if a TCG CPU doesn't have AArch64; this will make aa64_ feature tests generally return false. We only do this for TCG because only TCG really needs it, and for KVM it might be confusing to have QEMU's idea of the ID registers be different from KVM's. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260416165353.589569-2-peter.maydell@linaro.org --- target/arm/cpu.c | 35 +++++++++++++++++++++++++++++++++++ target/arm/cpu.h | 3 ++- 2 files changed, 37 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ void arm_cpu_finalize_features(ARMCPU *cpu, Error **errp) } } +static void arm_clear_aarch64_idregs(ARMCPU *cpu) +{ + /* Zero out all the AArch64 ID registers in ARMISARegisters */ + SET_IDREG(&cpu->isar, ID_AA64ISAR0, 0); + SET_IDREG(&cpu->isar, ID_AA64ISAR1, 0); + SET_IDREG(&cpu->isar, ID_AA64ISAR2, 0); + SET_IDREG(&cpu->isar, ID_AA64PFR0, 0); + SET_IDREG(&cpu->isar, ID_AA64PFR1, 0); + SET_IDREG(&cpu->isar, ID_AA64PFR2, 0); + SET_IDREG(&cpu->isar, ID_AA64MMFR0, 0); + SET_IDREG(&cpu->isar, ID_AA64MMFR1, 0); + SET_IDREG(&cpu->isar, ID_AA64MMFR2, 0); + SET_IDREG(&cpu->isar, ID_AA64MMFR3, 0); + SET_IDREG(&cpu->isar, ID_AA64DFR0, 0); + SET_IDREG(&cpu->isar, ID_AA64DFR1, 0); + SET_IDREG(&cpu->isar, ID_AA64AFR0, 0); + SET_IDREG(&cpu->isar, ID_AA64AFR1, 0); + SET_IDREG(&cpu->isar, ID_AA64ZFR0, 0); + SET_IDREG(&cpu->isar, ID_AA64SMFR0, 0); +} + static void arm_cpu_realizefn(DeviceState *dev, Error **errp) { CPUState *cs = CPU(dev); @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) } #endif + /* + * A TCG aarch64=off CPU has no AArch64 at all, so we clear out the + * ID registers to avoid cpu_isar_feature(aa64_something, cpu) tests + * incorrectly returning true. We don't do this for other accelerators + * (which in practice means "for KVM", since no others have AArch32 + * guest support) because from KVM's point of view the AArch64 ID + * registers still exist and must have their correct values. So we + * avoid clearing them out so that we don't have QEMU and KVM with + * different ideas of the ID registers. + */ + if (tcg_enabled() && !arm_feature(env, ARM_FEATURE_AARCH64)) { + arm_clear_aarch64_idregs(cpu); + } + #ifdef CONFIG_USER_ONLY /* * User mode relies on IC IVAU instructions to catch modification of diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ArchCPU { * Note that if you add an ID register to the ARMISARegisters struct * you need to also update the 32-bit and 64-bit versions of the * kvm_arm_get_host_cpu_features() function to correctly populate the - * field by reading the value from the KVM vCPU. + * field by reading the value from the KVM vCPU. If it is an AArch64 + * ID register then you also must update arm_clear_aarch64_idregs(). */ struct ARMISARegisters { uint32_t mvfr0; -- 2.43.0 Allow the 'aarch64=off' property, which is currently KVM-only, to be set for TCG CPUs also. Note that we don't permit it on the qemu-aarch64 user-mode binary: this makes no sense as that executable can only handle AArch64 syscalls (and it would also assert at startup since it doesn't compile in the A32-specific GDB xml files like arm-neon.xml). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Clément Chigot <chigot@adacore.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20260416165353.589569-3-peter.maydell@linaro.org --- docs/system/arm/cpu-features.rst | 10 +++++---- target/arm/cpu-features.h | 5 +++++ target/arm/cpu.c | 36 ++++++++++++++++++++++++++++---- tests/qtest/arm-cpu-features.c | 8 ++----- 4 files changed, 45 insertions(+), 14 deletions(-) diff --git a/docs/system/arm/cpu-features.rst b/docs/system/arm/cpu-features.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/cpu-features.rst +++ b/docs/system/arm/cpu-features.rst @@ -XXX,XX +XXX,XX @@ not implement ARMv8-A, will not have the ``aarch64`` CPU property. QEMU's support may be limited for some CPU features, only partially supporting the feature or only supporting the feature under certain configurations. For example, the ``aarch64`` CPU feature, which, when -disabled, enables the optional AArch32 CPU feature, is only supported -when using the KVM accelerator and when running on a host CPU type that -supports the feature. While ``aarch64`` currently only works with KVM, -it could work with TCG. CPU features that are specific to KVM are +disabled, enables the optional AArch32 CPU feature, can only be set to +``off`` on the TCG and KVM accelerators, and it cannot be set to +``off`` under KVM unless running on a host CPU type that supports +running guests in AArch32. + +CPU features that are inherently specific to KVM are prefixed with "kvm-" and are described in "KVM VCPU Features". CPU Feature Probing diff --git a/target/arm/cpu-features.h b/target/arm/cpu-features.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu-features.h +++ b/target/arm/cpu-features.h @@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa64_aa32_el2(const ARMISARegisters *id) return FIELD_EX64_IDREG(id, ID_AA64PFR0, EL2) >= 2; } +static inline bool isar_feature_aa64_aa32_el3(const ARMISARegisters *id) +{ + return FIELD_EX64_IDREG(id, ID_AA64PFR0, EL3) >= 2; +} + static inline bool isar_feature_aa64_ras(const ARMISARegisters *id) { return FIELD_EX64_IDREG(id, ID_AA64PFR0, RAS) != 0; diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void aarch64_cpu_set_aarch64(Object *obj, bool value, Error **errp) * uniform execution state like do_interrupt. */ if (value == false) { - if (!kvm_enabled() || !kvm_arm_aarch32_supported()) { - error_setg(errp, "'aarch64' feature cannot be disabled " - "unless KVM is enabled and 32-bit EL1 " - "is supported"); + if (kvm_enabled()) { + if (!kvm_arm_aarch32_supported()) { + error_setg(errp, "'aarch64' feature cannot be disabled for KVM " + "because this host does not support 32-bit EL1"); + return; + } + } else if (tcg_enabled()) { +#ifdef CONFIG_USER_ONLY + error_setg(errp, "'aarch64' feature cannot be disabled for " + "usermode emulator qemu-aarch64; use qemu-arm instead"); + return; +#else + bool aa32_at_highest_el; + if (arm_feature(&cpu->env, ARM_FEATURE_EL3)) { + aa32_at_highest_el = cpu_isar_feature(aa64_aa32_el3, cpu); + } else if (arm_feature(&cpu->env, ARM_FEATURE_EL2)) { + aa32_at_highest_el = cpu_isar_feature(aa64_aa32_el2, cpu); + } else { + aa32_at_highest_el = cpu_isar_feature(aa64_aa32_el1, cpu); + } + + if (!aa32_at_highest_el) { + error_setg(errp, "'aarch64' feature cannot be disabled for " + "this TCG CPU because it does not support 32-bit " + "execution at its highest implemented exception " + "level"); + return; + } +#endif + } else { + error_setg(errp, "'aarch64' feature cannot be disabled for " + "this accelerator"); return; } unset_feature(&cpu->env, ARM_FEATURE_AARCH64); diff --git a/tests/qtest/arm-cpu-features.c b/tests/qtest/arm-cpu-features.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/arm-cpu-features.c +++ b/tests/qtest/arm-cpu-features.c @@ -XXX,XX +XXX,XX @@ static void test_query_cpu_model_expansion(const void *data) sve_tests_default(qts, "max"); pauth_tests_default(qts, "max"); - /* Test that features that depend on KVM generate errors without. */ - assert_error(qts, "max", - "'aarch64' feature cannot be disabled " - "unless KVM is enabled and 32-bit EL1 " - "is supported", - "{ 'aarch64': false }"); + /* TCG allows us to turn off AArch64 on the 'max' CPU type */ + assert_set_feature(qts, "max", "aarch64", false); } qtest_quit(qts); -- 2.43.0 Add a basic test of the TCG 'aarch64=off' functionality; this is the same as our existing arm/test_virt test, but it runs the AArch32 guest kernel on qemu-system-aarch64 with -cpu max,aarch64=off. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20260416165353.589569-4-peter.maydell@linaro.org --- tests/functional/aarch64/meson.build | 1 + .../aarch64/test_virt_aarch64_off.py | 37 +++++++++++++++++++ 2 files changed, 38 insertions(+) create mode 100755 tests/functional/aarch64/test_virt_aarch64_off.py diff --git a/tests/functional/aarch64/meson.build b/tests/functional/aarch64/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/functional/aarch64/meson.build +++ b/tests/functional/aarch64/meson.build @@ -XXX,XX +XXX,XX @@ tests_aarch64_system_thorough = [ 'tcg_plugins', 'tuxrun', 'virt', + 'virt_aarch64_off', 'virt_gpu', 'virt_vbsa', 'xen', diff --git a/tests/functional/aarch64/test_virt_aarch64_off.py b/tests/functional/aarch64/test_virt_aarch64_off.py new file mode 100755 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/functional/aarch64/test_virt_aarch64_off.py @@ -XXX,XX +XXX,XX @@ +#!/usr/bin/env python3 +# +# Functional test that boots an AArch32 Linux kernel and checks the console +# on a TCG aarch64 CPU with aarch64=off. This is the same image etc +# as we use in tests/functional/arm/test_virt.py. +# +# SPDX-License-Identifier: GPL-2.0-or-later + +from qemu_test import LinuxKernelTest, Asset + +class ArmVirtMachine(LinuxKernelTest): + + ASSET_KERNEL = Asset( + ('https://archives.fedoraproject.org/pub/archive/fedora/linux/' + 'releases/29/Everything/armhfp/os/images/pxeboot/vmlinuz'), + '18dd5f1a9a28bd539f9d047f7c0677211bae528e8712b40ca5a229a4ad8e2591') + + def test_arm_virt(self): + self.set_machine('virt') + # KVM aarch64=off requires a host CPU that supports it, so + # restrict the test to TCG only + self.require_accelerator('tcg') + self.vm.add_args('-cpu', 'max,aarch64=off') + + kernel_path = self.ASSET_KERNEL.fetch() + + self.vm.set_console() + kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE + + 'console=ttyAMA0') + self.vm.add_args('-kernel', kernel_path, + '-append', kernel_command_line) + self.vm.launch() + console_pattern = 'Kernel command line: %s' % kernel_command_line + self.wait_for_console_pattern(console_pattern) + +if __name__ == '__main__': + LinuxKernelTest.main() -- 2.43.0 From: Eric Auger <eric.auger@redhat.com> We introduce a datatype for a tolerance with respect to a given cpreg migration issue. The tolerance applies to a given cpreg kvm index, and can be of different types: a) mismatch in cpreg indexes - ToleranceNotOnBothEnds (cpreg index is allowed to be only present on one end) - ToleranceOnlySrcTestValue (cpreg index is allowed to be only present in source if its value @mask field matches @value) b) mismatch in cpreg values - ToleranceDiffInMask (value differences are allowed only within a mask) - ToleranceFieldLT (incoming field value must be less than a given value) - ToleranceFieldGT (incoming field value must be greater than a given value) A QLIST of such tolerances can be populated using a new helper: arm_register_cpreg_mig_tolerance() and arm_cpu_match_cpreg_mig_tolerance() allows to check whether a tolerance exists for a given kvm index and its criterion is matched. callers for those helpers will be introduced in subsequent patches. Only registration of migration tolerances related to cpreg index mismatch is currently allowed. Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-id: 20260420140552.104369-2-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 82 ++++++++++++++++++++++++++++++++++++++++++ target/arm/cpu.h | 1 + target/arm/internals.h | 54 ++++++++++++++++++++++++++++ 3 files changed, 137 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ void arm_register_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook, QLIST_INSERT_HEAD(&cpu->el_change_hooks, entry, node); } +static ARMCPRegMigTolerance *find_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx) +{ + ARMCPRegMigTolerance *t; + QLIST_FOREACH(t, &cpu->cpreg_mig_tolerances, node) { + if (t->kvmidx == kvmidx) { + return t; + } + } + return NULL; +} + +void arm_register_cpreg_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx, + uint64_t mask, uint64_t value, + ARMCPRegMigToleranceType type) +{ + ARMCPRegMigTolerance *entry; + + /* make sure the kvmidx has not tolerance already registered */ + assert(!find_mig_tolerance(cpu, kvmidx)); + + assert(type == ToleranceNotOnBothEnds || + type == ToleranceOnlySrcTestValue); + + entry = g_new0(ARMCPRegMigTolerance, 1); + + entry->kvmidx = kvmidx; + entry->mask = mask; + entry->value = value; + entry->type = type; + + QLIST_INSERT_HEAD(&cpu->cpreg_mig_tolerances, entry, node); +} + +bool arm_cpu_match_cpreg_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx, + uint64_t vmstate_value, uint64_t local_value, + ARMCPRegMigToleranceType type) +{ + ARMCPRegMigTolerance *t = find_mig_tolerance(cpu, kvmidx); + uint64_t diff, diff_outside_mask, field; + + if (!t || t->type != type) { + return false; + } + + if (type == ToleranceNotOnBothEnds) { + return true; + } + + if (type == ToleranceOnlySrcTestValue && + ((vmstate_value & t->mask) == t->value)) { + return true; + } + + /* Need to check the mask */ + diff = vmstate_value ^ local_value; + diff_outside_mask = diff & ~t->mask; + + if (diff_outside_mask) { + /* there are differences outside of the mask */ + return false; + } + if (type == ToleranceDiffInMask) { + /* differences only in the field, tolerance matched */ + return true; + } + /* need to compare field value against authorized ones */ + field = vmstate_value & t->mask; + if (type == ToleranceFieldLT && (field < t->value)) { + return true; + } + if (type == ToleranceFieldGT && (field > t->value)) { + return true; + } + return false; +} + static void cp_reg_reset(gpointer key, gpointer value, gpointer opaque) { /* Reset a single ARMCPRegInfo register */ @@ -XXX,XX +XXX,XX @@ static void arm_cpu_initfn(Object *obj) QLIST_INIT(&cpu->pre_el_change_hooks); QLIST_INIT(&cpu->el_change_hooks); + QLIST_INIT(&cpu->cpreg_mig_tolerances); #ifdef CONFIG_USER_ONLY # ifdef TARGET_AARCH64 @@ -XXX,XX +XXX,XX @@ static void arm_cpu_finalizefn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); ARMELChangeHook *hook, *next; + ARMCPRegMigTolerance *t, *n; g_hash_table_destroy(cpu->cp_regs); @@ -XXX,XX +XXX,XX @@ static void arm_cpu_finalizefn(Object *obj) QLIST_REMOVE(hook, node); g_free(hook); } + QLIST_FOREACH_SAFE(t, &cpu->cpreg_mig_tolerances, node, n) { + QLIST_REMOVE(t, node); + g_free(t); + } #ifndef CONFIG_USER_ONLY if (cpu->pmu_timer) { timer_free(cpu->pmu_timer); diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ArchCPU { QLIST_HEAD(, ARMELChangeHook) pre_el_change_hooks; QLIST_HEAD(, ARMELChangeHook) el_change_hooks; + QLIST_HEAD(, ARMCPRegMigTolerance) cpreg_mig_tolerances; int32_t node_id; /* NUMA node this CPU belongs to */ diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ int compare_u64(const void *a, const void *b); /* Used in FEAT_MEC to set the MECIDWidthm1 field in the MECIDR_EL2 register. */ #define MECID_WIDTH 16 +typedef enum { + ToleranceNotOnBothEnds, + ToleranceOnlySrcTestValue, + ToleranceDiffInMask, + ToleranceFieldLT, + ToleranceFieldGT, +} ARMCPRegMigToleranceType; + +typedef struct ARMCPRegMigTolerance { + uint64_t kvmidx; + uint64_t mask; + uint64_t value; + ARMCPRegMigToleranceType type; + QLIST_ENTRY(ARMCPRegMigTolerance) node; +} ARMCPRegMigTolerance; + +/** + * arm_register_cpreg_mig_tolerance: + * Register a migration tolerance wrt one given cpreg identified by its + * @kvmidx. Calling this function twice for the same @kvmidx is a + * programming error and will cause an assertion failure. + * + * @cpu: vcpu to apply the migration tolerance on + * @kvmidx: kvm index of the cpreg the tolerance applies to + * @mask: bitmask where a difference is tolerated + * (relevant with ToleranceDiffInMask) + * @value: value the bitmask field is compared with + * (relevant with ToleranceFieldLT and ToleranceFieldGT) + * @type: type of the migration tolerance: + * - ToleranceNotOnBothEnds (cpreg index is allowed to be only present + * on one end) + * - ToleranceOnlySrcTestValue (cpreg index is allowed to be only + * present in source if its value @mask field matches @value) + * - ToleranceDiffInMask (mismatch in cpreg values are only tolerated + * if differences are within @mask) + * - ToleranceFieldLT (mismatch in cpreg values are only tolerated + * if incoming @bitmask field value is less than @value) + * - ToleranceFieldGT (mismatch in cpreg values are only tolerated + * if incoming @bitmask field value is greater than @value) + */ +void arm_register_cpreg_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx, + uint64_t mask, uint64_t value, + ARMCPRegMigToleranceType type); + +/** + * arm_cpu_match_cpreg_mig_tolerance: + * Check whether a tolerance of type @type exists for a given @kvmidx + * and the tolerance criterion is satisfied + */ +bool arm_cpu_match_cpreg_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx, + uint64_t vmstate_value, uint64_t local_value, + ARMCPRegMigToleranceType type); + + #endif -- 2.43.0 From: Eric Auger <eric.auger@redhat.com> If there is a mismatch between the cpreg indexes found on both ends, check whether a tolerance was registered for the given kvmidx. If any, silence warning/errors. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20260420140552.104369-3-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/machine.c | 21 +++++++++++++++------ target/arm/trace-events | 2 ++ 2 files changed, 17 insertions(+), 6 deletions(-) diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static void handle_cpreg_missing_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx { g_autofree gchar *name = print_register_name(kvmidx); + if (arm_cpu_match_cpreg_mig_tolerance(cpu, kvmidx, + 0, 0, ToleranceNotOnBothEnds)) { + trace_tolerate_cpreg_missing_in_incoming_stream(name); + return; + } warn_report("%s: %s " "expected by the destination but not in the incoming stream: " "skip it", __func__, name); } /* - * Handle the situation where @kvmidx is in the incoming stream - * but not on destination. This currently fails the migration but - * we plan to accomodate some exceptions, hence the boolean returned value. + * Handle the situation where @kvmidx is in the incoming + * stream but not on destination. This fails the migration if + * no cpreg mig tolerance is matched for this @kvmidx + * Return true if the migration should eventually fail */ static bool handle_cpreg_only_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx) { g_autofree gchar *name = print_register_name(kvmidx); - bool fail = true; + if (arm_cpu_match_cpreg_mig_tolerance(cpu, kvmidx, + 0, 0, ToleranceNotOnBothEnds)) { + trace_tolerate_cpreg_only_in_incoming_stream(name); + return false; + } error_report("%s: %s in the incoming stream but unknown on the " "destination: fail migration", __func__, name); - - return fail; + return true; } static int cpu_post_load(void *opaque, int version_id) diff --git a/target/arm/trace-events b/target/arm/trace-events index XXXXXXX..XXXXXXX 100644 --- a/target/arm/trace-events +++ b/target/arm/trace-events @@ -XXX,XX +XXX,XX @@ arm_psci_call(uint64_t x0, uint64_t x1, uint64_t x2, uint64_t x3, uint32_t cpuid # machine.c cpu_post_load(uint32_t cpreg_vmstate_array_len, uint32_t cpreg_array_len) "cpreg_vmstate_array_len=%d cpreg_array_len=%d" +tolerate_cpreg_missing_in_incoming_stream(char *name) "%s is missing in incoming stream but this is explicitly tolerated" +tolerate_cpreg_only_in_incoming_stream(char *name) "%s is in incoming stream but not on destination but this is explicitly tolerated" -- 2.43.0 From: Eric Auger <eric.auger@redhat.com> Pass the value of the incoming register to handle_cpreg_only_in_incoming_stream and check whether there is a matching ToleranceOnlySrcTestValue tolerance. Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-id: 20260420140552.104369-4-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/machine.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static void handle_cpreg_missing_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx * no cpreg mig tolerance is matched for this @kvmidx * Return true if the migration should eventually fail */ -static bool handle_cpreg_only_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx) +static bool +handle_cpreg_only_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx, uint64_t value) { g_autofree gchar *name = print_register_name(kvmidx); if (arm_cpu_match_cpreg_mig_tolerance(cpu, kvmidx, - 0, 0, ToleranceNotOnBothEnds)) { + 0, 0, ToleranceNotOnBothEnds) || + arm_cpu_match_cpreg_mig_tolerance(cpu, kvmidx, + value, 0, ToleranceOnlySrcTestValue)) { trace_tolerate_cpreg_only_in_incoming_stream(name); return false; } @@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id) } if (cpu->cpreg_vmstate_indexes[v] < cpu->cpreg_indexes[i]) { fail = handle_cpreg_only_in_incoming_stream(cpu, - cpu->cpreg_vmstate_indexes[v++]); + cpu->cpreg_vmstate_indexes[v], + cpu->cpreg_vmstate_values[v]); + v++; continue; } /* matching register, copy the value over */ @@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id) */ for ( ; v < cpu->cpreg_vmstate_array_len; v++) { fail = handle_cpreg_only_in_incoming_stream(cpu, - cpu->cpreg_vmstate_indexes[v]); + cpu->cpreg_vmstate_indexes[v], + cpu->cpreg_vmstate_values[v]); } if (fail) { return -1; -- 2.43.0 From: Eric Auger <eric.auger@redhat.com> Before linux v6.13 those registers were erroneously unconditionally exposed and this was fixed by commits: - 0fcb4eea5345 ("KVM: arm64: Hide TCR2_EL1 from userspace when disabled for guests") - a68cddbe47ef ("KVM: arm64: Hide S1PIE registers from userspace when disabled for guests") in v6.13. This means if we migrate from an old kernel host to a >= 6.13 kernel host, migration currently fails. Declare cpreg migration tolerance for those registers. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Sebastian Ott <sebott@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20260420140552.104369-5-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu64.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_a53_initfn(Object *obj) define_cortex_a72_a57_a53_cp_reginfo(cpu); } +#if defined(CONFIG_KVM) +static void kvm_arm_set_cpreg_mig_tolerances(ARMCPU *cpu) +{ + /* + * Registers that may be in the incoming stream and not exposed + * on the destination + */ + + /* + * TCR_EL1 was erroneously unconditionnally exposed before linux v6.13. + * See commit 0fcb4eea5345 ("KVM: arm64: Hide TCR2_EL1 from userspace + * when disabled for guests") + */ + arm_register_cpreg_mig_tolerance(cpu, ARM64_SYS_REG(3, 0, 2, 0, 3), + 0, 0, ToleranceNotOnBothEnds); + /* + * PIRE0_EL1 and PIR_EL1 were erroneously unconditionnally exposed + * before linux v6.13. See commit a68cddbe47ef ("KVM: arm64: Hide + * S1PIE registers from userspace when disabled for guests") + */ + arm_register_cpreg_mig_tolerance(cpu, ARM64_SYS_REG(3, 0, 10, 2, 2), + 0, 0, ToleranceNotOnBothEnds); + arm_register_cpreg_mig_tolerance(cpu, ARM64_SYS_REG(3, 0, 10, 2, 3), + 0, 0, ToleranceNotOnBothEnds); +} +#endif + static void aarch64_host_initfn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); @@ -XXX,XX +XXX,XX @@ static void aarch64_host_initfn(Object *obj) #endif #if defined(CONFIG_KVM) + kvm_arm_set_cpreg_mig_tolerances(cpu); kvm_arm_set_cpu_features_from_host(cpu); aarch64_add_sve_properties(obj); #elif defined(CONFIG_HVF) -- 2.43.0 From: Eric Auger <eric.auger@redhat.com> KVM_REG_ARM_VENDOR_HYP_BMAP_2 pseudo FW register is exposed from v6.15 onwards. Backward migration from a >= v6.15 to an older kernel would fail without cpreg migration tolerance definition for this register. If the register is present on source but not on destination, its value must be checked to make sure it matches the reset value, ie. 0, meaning no service is exposed to the guest, hence the choice of a ToleranceOnlySrcTestValue migration tolerance. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20260420140552.104369-6-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu64.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void kvm_arm_set_cpreg_mig_tolerances(ARMCPU *cpu) 0, 0, ToleranceNotOnBothEnds); arm_register_cpreg_mig_tolerance(cpu, ARM64_SYS_REG(3, 0, 10, 2, 3), 0, 0, ToleranceNotOnBothEnds); + + /* + * KVM_REG_ARM_VENDOR_HYP_BMAP_2 pseudo FW register is exposed + * from v6.15 onwards. Backward migration from a >= v6.15 to an older + * kernel would fail without cpreg migration tolerance definition. + * If the register is present on source but not on destination, make + * sure it has its reset value, ie. 0, meaning no service is exposed + * to the guest. + */ + arm_register_cpreg_mig_tolerance(cpu, KVM_REG_ARM_FW_FEAT_BMAP_REG(3), + UINT64_MAX, 0, ToleranceOnlySrcTestValue); } #endif -- 2.43.0 From: Eric Auger <eric.auger@redhat.com> We want to remove AArch32 DBGDTRTX which was erroneously exposed. This was attempted by 655659a74a36b ("target/arm: Correct encoding of Debug Communications Channel registers") but it was discovered that the removal of this debug register broke forward migration on TCG. Now we have the cpreg migration tolerance infrastructure, we can declare one for the DBGDTRTX. This allow to revert the reinstate patch. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Sebastian Ott <sebott@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20260420140552.104369-7-eric.auger@redhat.com [PMM: revised comment, included note about when we can drop the workaround] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .fgt = FGT_CLIDR_EL1, .resetvalue = GET_IDREG(isar, CLIDR) }; + uint64_t dbgtr_el0_kvmidx = + cpreg_to_kvm_id(ENCODE_CP_REG(14, 0, 1, 0, 5, 3, 0)); + define_one_arm_cp_reg(cpu, &clidr); define_arm_cp_regs(cpu, v7_cp_reginfo); define_debug_regs(cpu); + /* + * We used to incorrectly expose a non-existent AArch32 "DBGDTRTX" + * register with this encoding. This has been fixed by commit + * 655659a74a36 ("target/arm: Correct encoding of Debug + * Communications Channel registers") by the introduction of correct + * separate cpreg definitions for AA64 and AA32 versions. However, + * the old cpreg definition couldn't be removed without breaking + * migration, so commit 4f2b82f604 reinstated the bogus encoding + * for migration data only. + * + * Now that we have migration tolerance infrastructure, we can use + * this to allow forward migration from the buggy QEMU versions, + * accepting and ignoring the bogus register if it is in the + * source data. QEMU 11.0 was the last version that sent the + * bogus encoding, so this workaround can be removed at the point + * where we no longer care about migration from that version + * (i.e. when we remove the "virt-11.0" machine type). + */ + arm_register_cpreg_mig_tolerance(cpu, dbgtr_el0_kvmidx, + 0, 0, ToleranceNotOnBothEnds); } else { define_arm_cp_regs(cpu, not_v7_cp_reginfo); } -- 2.43.0 From: Eric Auger <eric.auger@redhat.com> This reverts commit 4f2b82f60431 ("target/arm: Reinstate bogus AArch32 DBGDTRTX register for migration compat). We don't need that commit anymore as the AArch32 DBGDTRTX register is declared to be safe to ignore in the incoming migration stream. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Sebastian Ott <sebott@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20260420140552.104369-8-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/debug_helper.c | 29 ----------------------------- 1 file changed, 29 deletions(-) diff --git a/target/arm/debug_helper.c b/target/arm/debug_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/debug_helper.c +++ b/target/arm/debug_helper.c @@ -XXX,XX +XXX,XX @@ static void dbgclaimclr_write(CPUARMState *env, const ARMCPRegInfo *ri, env->cp15.dbgclaim &= ~(value & 0xFF); } -static CPAccessResult access_bogus(CPUARMState *env, const ARMCPRegInfo *ri, - bool isread) -{ - /* Always UNDEF, as if this cpreg didn't exist */ - return CP_ACCESS_UNDEFINED; -} - static const ARMCPRegInfo debug_cp_reginfo[] = { /* * DBGDRAR, DBGDSAR: always RAZ since we don't implement memory mapped @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo debug_cp_reginfo[] = { .opc0 = 2, .opc1 = 3, .crn = 0, .crm = 4, .opc2 = 0, .access = PL0_RW, .accessfn = access_tdcc, .type = ARM_CP_CONST, .resetvalue = 0 }, - /* - * This is not a real AArch32 register. We used to incorrectly expose - * this due to a QEMU bug; to avoid breaking migration compatibility we - * need to continue to provide it so that we don't fail the inbound - * migration when it tells us about a sysreg that we don't have. - * We set an always-fails .accessfn, which means that the guest doesn't - * actually see this register (it will always UNDEF, identically to if - * there were no cpreg definition for it other than that we won't print - * a LOG_UNIMP message about it), and we set the ARM_CP_NO_GDB flag so the - * gdbstub won't see it either. - * (We can't just set .access = 0, because add_cpreg_to_hashtable() - * helpfully ignores cpregs which aren't accessible to the highest - * implemented EL.) - * - * TODO: implement a system for being able to describe "this register - * can be ignored if it appears in the inbound stream"; then we can - * remove this temporary hack. - */ - { .name = "BOGUS_DBGDTR_EL0", .state = ARM_CP_STATE_AA32, - .cp = 14, .opc1 = 3, .crn = 0, .crm = 5, .opc2 = 0, - .access = PL0_RW, .accessfn = access_bogus, - .type = ARM_CP_CONST | ARM_CP_NO_GDB, .resetvalue = 0 }, /* * OSECCR_EL1 provides a mechanism for an operating system * to access the contents of EDECCR. EDECCR is not implemented though, -- 2.43.0 From: Osama Abdelkader <osama.abdelkader@gmail.com> fdt_node_offset_by_compatible(fdt, -1, compat) only finds the first match. If the blob has more than one node with the same compatible string, extra nodes will remain active. Remove all the matching nodes, using the same loop as imx8mp-evk.c does for this purpose. Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com> Message-id: 20260420162114.308519-1-osama.abdelkader@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/raspi4b.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/hw/arm/raspi4b.c b/hw/arm/raspi4b.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/raspi4b.c +++ b/hw/arm/raspi4b.c @@ -XXX,XX +XXX,XX @@ static void raspi4_modify_dtb(const struct arm_boot_info *info, void *fdt) for (int i = 0; i < ARRAY_SIZE(nodes_to_remove); i++) { const char *dev_str = nodes_to_remove[i]; + int offset; - int offset = fdt_node_offset_by_compatible(fdt, -1, dev_str); - if (offset >= 0) { - if (!fdt_nop_node(fdt, offset)) { - warn_report("bcm2711 dtc: %s has been disabled!", dev_str); + offset = fdt_node_offset_by_compatible(fdt, -1, dev_str); + while (offset >= 0) { + if (fdt_nop_node(fdt, offset) == 0) { + warn_report("bcm2711 dtb: %s has been disabled!", dev_str); } + offset = fdt_node_offset_by_compatible(fdt, offset, dev_str); } } -- 2.43.0 From: Yucai Liu <1486344514@qq.com> Implement a basic i.MX6UL LCDIF controller model with MMIO registers, frame-done interrupt behavior, and framebuffer-backed display updates for RGB565 and XRGB8888 input formats. Place the LCDIF device under hw/display and build it via a dedicated CONFIG_IMX6UL_LCDIF symbol. Model register fields with registerfields.h helpers and provide migration support via vmstate. Signed-off-by: Yucai Liu <1486344514@qq.com> Message-id: 20260412110240.93116-2-yangyanglan718@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 2 + hw/display/Kconfig | 4 + hw/display/imx6ul_lcdif.c | 453 ++++++++++++++++++++++++++++++ hw/display/meson.build | 1 + include/hw/display/imx6ul_lcdif.h | 37 +++ 5 files changed, 497 insertions(+) create mode 100644 hw/display/imx6ul_lcdif.c create mode 100644 include/hw/display/imx6ul_lcdif.h diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ L: qemu-arm@nongnu.org S: Odd Fixes F: hw/arm/mcimx6ul-evk.c F: hw/arm/fsl-imx6ul.c +F: hw/display/imx6ul_lcdif.c F: hw/misc/imx6ul_ccm.c F: include/hw/arm/fsl-imx6ul.h +F: include/hw/display/imx6ul_lcdif.h F: include/hw/misc/imx6ul_ccm.h F: docs/system/arm/mcimx6ul-evk.rst diff --git a/hw/display/Kconfig b/hw/display/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/display/Kconfig +++ b/hw/display/Kconfig @@ -XXX,XX +XXX,XX @@ config PL110 bool select FRAMEBUFFER +config IMX6UL_LCDIF + bool + select FRAMEBUFFER + config SII9022 bool depends on I2C diff --git a/hw/display/imx6ul_lcdif.c b/hw/display/imx6ul_lcdif.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/display/imx6ul_lcdif.c @@ -XXX,XX +XXX,XX @@ +/* + * SPDX-License-Identifier: GPL-2.0-or-later + * + * i.MX6UL LCDIF controller + * + * Copyright (c) 2026 Yucai Liu <1486344514@qq.com> + */ + +#include "qemu/osdep.h" +#include "hw/display/imx6ul_lcdif.h" +#include "hw/core/irq.h" +#include "hw/core/registerfields.h" +#include "hw/display/framebuffer.h" +#include "migration/vmstate.h" +#include "system/address-spaces.h" +#include "qemu/module.h" +#include "qemu/units.h" +#include "ui/pixel_ops.h" + +#define LCDIF_MMIO_SIZE (16 * KiB) +#define LCDIF_RESET_CTRL1 0x000f0000 + +REG32(CTRL, 0x00) + FIELD(CTRL, RUN, 0, 1) + FIELD(CTRL, WORD_LENGTH, 8, 2) +REG32(CTRL1, 0x10) + FIELD(CTRL1, CUR_FRAME_DONE_IRQ, 9, 1) + FIELD(CTRL1, CUR_FRAME_DONE_IRQ_EN, 13, 1) + FIELD(CTRL1, BYTE_PACKING_FORMAT, 16, 4) +REG32(V4_TRANSFER_COUNT, 0x30) + FIELD(V4_TRANSFER_COUNT, H_COUNT, 0, 16) + FIELD(V4_TRANSFER_COUNT, V_COUNT, 16, 16) +REG32(V4_CUR_BUF, 0x40) +REG32(V4_NEXT_BUF, 0x50) +REG32(AS_NEXT_BUF, 0x230) + +#define REG_SET 0x4 +#define REG_CLR 0x8 +#define REG_TOG 0xc + +#define CTRL_WORD_LENGTH_16 0 +#define CTRL_WORD_LENGTH_24 3 + +#define FRAME_PERIOD_NS (16 * 1000 * 1000ULL) + +enum IMX6ULLCDIFReg { + IMX6UL_LCDIF_REG_CTRL = A_CTRL >> 4, + IMX6UL_LCDIF_REG_CTRL1 = A_CTRL1 >> 4, + IMX6UL_LCDIF_REG_V4_TRANSFER_COUNT = A_V4_TRANSFER_COUNT >> 4, + IMX6UL_LCDIF_REG_V4_CUR_BUF = A_V4_CUR_BUF >> 4, + IMX6UL_LCDIF_REG_V4_NEXT_BUF = A_V4_NEXT_BUF >> 4, + IMX6UL_LCDIF_REG_AS_NEXT_BUF = A_AS_NEXT_BUF >> 4, +}; + +static inline bool imx6ul_lcdif_reg_exists(hwaddr reg) +{ + return (reg >> 4) < IMX6UL_LCDIF_REGS_NUM; +} + +static inline bool imx6ul_lcdif_reg_has_setclr(hwaddr reg) +{ + switch (reg) { + case A_CTRL: + case A_CTRL1: + return true; + default: + return false; + } +} + +static inline bool imx6ul_lcdif_is_running(IMX6ULLCDIFState *s) +{ + uint32_t ctrl = s->regs[IMX6UL_LCDIF_REG_CTRL]; + + return FIELD_EX32(ctrl, CTRL, RUN); +} + +static inline bool imx6ul_lcdif_frame_done_pending(IMX6ULLCDIFState *s) +{ + uint32_t ctrl1 = s->regs[IMX6UL_LCDIF_REG_CTRL1]; + + return FIELD_EX32(ctrl1, CTRL1, CUR_FRAME_DONE_IRQ); +} + +static void imx6ul_lcdif_schedule_frame(IMX6ULLCDIFState *s) +{ + int64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + + timer_mod(s->frame_timer, now + FRAME_PERIOD_NS); +} + +static void imx6ul_lcdif_maybe_schedule_frame(IMX6ULLCDIFState *s) +{ + if (imx6ul_lcdif_is_running(s) && !imx6ul_lcdif_frame_done_pending(s)) { + imx6ul_lcdif_schedule_frame(s); + } else { + timer_del(s->frame_timer); + } +} + +static void imx6ul_lcdif_update_irq(IMX6ULLCDIFState *s) +{ + uint32_t ctrl1 = s->regs[IMX6UL_LCDIF_REG_CTRL1]; + bool level = FIELD_EX32(ctrl1, CTRL1, CUR_FRAME_DONE_IRQ_EN) && + FIELD_EX32(ctrl1, CTRL1, CUR_FRAME_DONE_IRQ); + + qemu_set_irq(s->irq, level); +} + +static void imx6ul_lcdif_frame_done(IMX6ULLCDIFState *s) +{ + uint32_t ctrl1 = s->regs[IMX6UL_LCDIF_REG_CTRL1]; + + ctrl1 = FIELD_DP32(ctrl1, CTRL1, CUR_FRAME_DONE_IRQ, 1); + s->regs[IMX6UL_LCDIF_REG_CTRL1] = ctrl1; + imx6ul_lcdif_update_irq(s); +} + +static void imx6ul_lcdif_draw_line_rgb565(void *opaque, uint8_t *dst, + const uint8_t *src, int width, + int dststep) +{ + uint32_t *dst32 = (uint32_t *)dst; + int i; + + for (i = 0; i < width; i++) { + uint16_t pixel = lduw_le_p(src); + uint8_t r = ((pixel >> 11) & 0x1f) << 3; + uint8_t g = ((pixel >> 5) & 0x3f) << 2; + uint8_t b = (pixel & 0x1f) << 3; + + *dst32++ = rgb_to_pixel32(r, g, b); + src += 2; + } +} + +static void imx6ul_lcdif_draw_line_xrgb8888(void *opaque, uint8_t *dst, + const uint8_t *src, int width, + int dststep) +{ + uint32_t *dst32 = (uint32_t *)dst; + int i; + + for (i = 0; i < width; i++) { + uint32_t pixel = ldl_le_p(src); + uint8_t r = (pixel >> 16) & 0xff; + uint8_t g = (pixel >> 8) & 0xff; + uint8_t b = pixel & 0xff; + + *dst32++ = rgb_to_pixel32(r, g, b); + src += 4; + } +} + +static void imx6ul_lcdif_update_display(void *opaque) +{ + IMX6ULLCDIFState *s = opaque; + DisplaySurface *surface = qemu_console_surface(s->con); + uint32_t transfer_count = s->regs[IMX6UL_LCDIF_REG_V4_TRANSFER_COUNT]; + uint32_t width = FIELD_EX32(transfer_count, V4_TRANSFER_COUNT, H_COUNT); + uint32_t height = FIELD_EX32(transfer_count, V4_TRANSFER_COUNT, V_COUNT); + uint32_t ctrl = s->regs[IMX6UL_LCDIF_REG_CTRL]; + uint32_t frame_base = s->regs[IMX6UL_LCDIF_REG_V4_CUR_BUF]; + drawfn fn; + int first = 0; + int last = 0; + int src_width; + + if (!imx6ul_lcdif_is_running(s) || width == 0 || height == 0) { + return; + } + + switch (FIELD_EX32(ctrl, CTRL, WORD_LENGTH)) { + case CTRL_WORD_LENGTH_16: + s->src_bpp = 2; + fn = imx6ul_lcdif_draw_line_rgb565; + break; + case CTRL_WORD_LENGTH_24: + s->src_bpp = 4; + fn = imx6ul_lcdif_draw_line_xrgb8888; + break; + default: + return; + } + + if (surface_width(surface) != width || surface_height(surface) != height) { + qemu_console_resize(s->con, width, height); + surface = qemu_console_surface(s->con); + s->invalidate = true; + } + + src_width = width * s->src_bpp; + if (s->invalidate || s->fb_base != frame_base || + s->src_width != src_width || s->rows != height) { + framebuffer_update_memory_section(&s->fbsection, get_system_memory(), + frame_base, height, src_width); + s->fb_base = frame_base; + s->src_width = src_width; + s->rows = height; + } + + framebuffer_update_display(surface, &s->fbsection, width, height, + src_width, surface_stride(surface), 0, + s->invalidate, fn, s, &first, &last); + if (first >= 0) { + dpy_gfx_update(s->con, 0, first, width, last - first + 1); + } + + s->invalidate = false; +} + +static void imx6ul_lcdif_invalidate_display(void *opaque) +{ + IMX6ULLCDIFState *s = opaque; + + s->invalidate = true; +} + +static const GraphicHwOps imx6ul_lcdif_graphic_ops = { + .invalidate = imx6ul_lcdif_invalidate_display, + .gfx_update = imx6ul_lcdif_update_display, +}; + +static void imx6ul_lcdif_frame_timer_cb(void *opaque) +{ + IMX6ULLCDIFState *s = opaque; + + if (!imx6ul_lcdif_is_running(s) || imx6ul_lcdif_frame_done_pending(s)) { + return; + } + + imx6ul_lcdif_frame_done(s); +} + +static uint64_t imx6ul_lcdif_read(void *opaque, hwaddr offset, unsigned size) +{ + IMX6ULLCDIFState *s = opaque; + hwaddr reg = offset & ~0xf; + uint32_t idx; + + assert(size == 4); + assert(!(offset & 0x3)); + assert(offset < LCDIF_MMIO_SIZE); + + idx = reg >> 4; + if (idx >= ARRAY_SIZE(s->regs)) { + return 0; + } + + return s->regs[idx]; +} + +static void imx6ul_lcdif_write(void *opaque, hwaddr offset, + uint64_t value, unsigned size) +{ + IMX6ULLCDIFState *s = opaque; + hwaddr reg = offset & ~0xf; + uint32_t idx; + uint32_t oldv; + + assert(size == 4); + assert(!(offset & 0x3)); + assert(offset < LCDIF_MMIO_SIZE); + + if (!imx6ul_lcdif_reg_exists(reg)) { + return; + } + + idx = reg >> 4; + oldv = s->regs[idx]; + + switch (offset & 0xf) { + case 0: + s->regs[idx] = (uint32_t)value; + break; + case REG_SET: + if (!imx6ul_lcdif_reg_has_setclr(reg)) { + return; + } + s->regs[idx] = oldv | (uint32_t)value; + break; + case REG_CLR: + if (!imx6ul_lcdif_reg_has_setclr(reg)) { + return; + } + s->regs[idx] = oldv & ~(uint32_t)value; + break; + case REG_TOG: + if (!imx6ul_lcdif_reg_has_setclr(reg)) { + return; + } + s->regs[idx] = oldv ^ (uint32_t)value; + break; + default: + g_assert_not_reached(); + } + + switch (reg) { + case A_CTRL: + if (!FIELD_EX32(oldv, CTRL, RUN) && + FIELD_EX32(s->regs[idx], CTRL, RUN)) { + s->invalidate = true; + graphic_hw_invalidate(s->con); + imx6ul_lcdif_maybe_schedule_frame(s); + break; + } + if (FIELD_EX32(oldv, CTRL, RUN) && + !FIELD_EX32(s->regs[idx], CTRL, RUN)) { + timer_del(s->frame_timer); + } + break; + case A_CTRL1: + if (FIELD_EX32(oldv, CTRL1, CUR_FRAME_DONE_IRQ) && + !FIELD_EX32(s->regs[idx], CTRL1, CUR_FRAME_DONE_IRQ)) { + imx6ul_lcdif_maybe_schedule_frame(s); + } + break; + case A_V4_TRANSFER_COUNT: + s->invalidate = true; + graphic_hw_invalidate(s->con); + break; + case A_V4_CUR_BUF: + s->invalidate = true; + graphic_hw_invalidate(s->con); + break; + case A_V4_NEXT_BUF: + s->regs[IMX6UL_LCDIF_REG_V4_CUR_BUF] = s->regs[idx]; + imx6ul_lcdif_frame_done(s); + s->invalidate = true; + graphic_hw_invalidate(s->con); + imx6ul_lcdif_maybe_schedule_frame(s); + return; + case A_AS_NEXT_BUF: + imx6ul_lcdif_frame_done(s); + imx6ul_lcdif_maybe_schedule_frame(s); + return; + default: + break; + } + + imx6ul_lcdif_update_irq(s); +} + +static const MemoryRegionOps imx6ul_lcdif_ops = { + .read = imx6ul_lcdif_read, + .write = imx6ul_lcdif_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static void imx6ul_lcdif_reset(DeviceState *dev) +{ + IMX6ULLCDIFState *s = IMX6UL_LCDIF(dev); + + memset(s->regs, 0, sizeof(s->regs)); + s->regs[IMX6UL_LCDIF_REG_CTRL1] = LCDIF_RESET_CTRL1; + s->fb_base = 0; + s->src_width = 0; + s->rows = 0; + s->src_bpp = 0; + s->invalidate = true; + timer_del(s->frame_timer); + imx6ul_lcdif_update_irq(s); +} + +static int imx6ul_lcdif_post_load(void *opaque, int version_id) +{ + IMX6ULLCDIFState *s = opaque; + + s->fb_base = 0; + s->src_width = 0; + s->rows = 0; + s->src_bpp = 0; + s->invalidate = true; + + imx6ul_lcdif_update_irq(s); + if (imx6ul_lcdif_is_running(s) && + !imx6ul_lcdif_frame_done_pending(s) && + !timer_pending(s->frame_timer)) { + imx6ul_lcdif_schedule_frame(s); + } + + return 0; +} + +static const VMStateDescription vmstate_imx6ul_lcdif = { + .name = TYPE_IMX6UL_LCDIF, + .version_id = 1, + .minimum_version_id = 1, + .post_load = imx6ul_lcdif_post_load, + .fields = (const VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, IMX6ULLCDIFState, IMX6UL_LCDIF_REGS_NUM), + VMSTATE_TIMER_PTR(frame_timer, IMX6ULLCDIFState), + VMSTATE_END_OF_LIST() + }, +}; + +static void imx6ul_lcdif_realize(DeviceState *dev, Error **errp) +{ + IMX6ULLCDIFState *s = IMX6UL_LCDIF(dev); + + s->frame_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, + imx6ul_lcdif_frame_timer_cb, s); + s->invalidate = true; + memory_region_init_io(&s->iomem, OBJECT(dev), &imx6ul_lcdif_ops, s, + TYPE_IMX6UL_LCDIF, LCDIF_MMIO_SIZE); + sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->iomem); + sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq); + s->con = graphic_console_init(dev, 0, &imx6ul_lcdif_graphic_ops, s); +} + +static void imx6ul_lcdif_unrealize(DeviceState *dev) +{ + IMX6ULLCDIFState *s = IMX6UL_LCDIF(dev); + + timer_del(s->frame_timer); + timer_free(s->frame_timer); + s->frame_timer = NULL; + + if (s->con) { + graphic_console_close(s->con); + s->con = NULL; + } +} + +static void imx6ul_lcdif_class_init(ObjectClass *klass, const void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = imx6ul_lcdif_realize; + dc->unrealize = imx6ul_lcdif_unrealize; + dc->vmsd = &vmstate_imx6ul_lcdif; + device_class_set_legacy_reset(dc, imx6ul_lcdif_reset); + dc->desc = "i.MX6UL LCDIF"; +} + +static const TypeInfo imx6ul_lcdif_info = { + .name = TYPE_IMX6UL_LCDIF, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(IMX6ULLCDIFState), + .class_init = imx6ul_lcdif_class_init, +}; + +static void imx6ul_lcdif_register_types(void) +{ + type_register_static(&imx6ul_lcdif_info); +} + +type_init(imx6ul_lcdif_register_types) diff --git a/hw/display/meson.build b/hw/display/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/display/meson.build +++ b/hw/display/meson.build @@ -XXX,XX +XXX,XX @@ system_ss.add(when: ['CONFIG_VGA_CIRRUS', 'CONFIG_VGA_ISA'], if_true: files('cir system_ss.add(when: 'CONFIG_G364FB', if_true: files('g364fb.c')) system_ss.add(when: 'CONFIG_JAZZ_LED', if_true: files('jazz_led.c')) system_ss.add(when: 'CONFIG_PL110', if_true: files('pl110.c')) +system_ss.add(when: 'CONFIG_IMX6UL_LCDIF', if_true: files('imx6ul_lcdif.c')) system_ss.add(when: 'CONFIG_SII9022', if_true: files('sii9022.c')) system_ss.add(when: 'CONFIG_SSD0303', if_true: files('ssd0303.c')) system_ss.add(when: 'CONFIG_SSD0323', if_true: files('ssd0323.c')) diff --git a/include/hw/display/imx6ul_lcdif.h b/include/hw/display/imx6ul_lcdif.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/display/imx6ul_lcdif.h @@ -XXX,XX +XXX,XX @@ +/* + * SPDX-License-Identifier: GPL-2.0-or-later + * + * i.MX6UL LCDIF controller + * + * Copyright (c) 2026 Yucai Liu <1486344514@qq.com> + */ + +#ifndef IMX6UL_LCDIF_H +#define IMX6UL_LCDIF_H + +#include "hw/core/sysbus.h" +#include "qom/object.h" +#include "qemu/timer.h" +#include "ui/console.h" + +#define TYPE_IMX6UL_LCDIF "imx6ul-lcdif" +#define IMX6UL_LCDIF_REGS_NUM ((0x230 >> 4) + 1) +OBJECT_DECLARE_SIMPLE_TYPE(IMX6ULLCDIFState, IMX6UL_LCDIF) + +struct IMX6ULLCDIFState { + SysBusDevice parent_obj; + + MemoryRegion iomem; + MemoryRegionSection fbsection; + qemu_irq irq; + QemuConsole *con; + QEMUTimer *frame_timer; + uint32_t fb_base; + uint32_t src_width; + uint32_t rows; + uint8_t src_bpp; + bool invalidate; + uint32_t regs[IMX6UL_LCDIF_REGS_NUM]; +}; + +#endif /* IMX6UL_LCDIF_H */ -- 2.43.0 From: Yucai Liu <1486344514@qq.com> Instantiate LCDIF as a child object of the i.MX6UL SoC in init and realize it in the SoC realize path before MMIO/IRQ hookup. Also make FSL_IMX6UL select CONFIG_IMX6UL_LCDIF and map the LCDIF region with a 16 KiB size to match the SoC memory map. Signed-off-by: Yucai Liu <1486344514@qq.com> Message-id: 20260412110240.93116-3-yangyanglan718@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx6ul.c | 12 ++++++++++-- include/hw/arm/fsl-imx6ul.h | 4 +++- 3 files changed, 14 insertions(+), 3 deletions(-) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX6UL imply I2C_DEVICES select A15MPCORE select IMX + select IMX6UL_LCDIF select IMX_FEC select IMX_I2C select IMX_USBPHY diff --git a/hw/arm/fsl-imx6ul.c b/hw/arm/fsl-imx6ul.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx6ul.c +++ b/hw/arm/fsl-imx6ul.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qapi/error.h" #include "hw/arm/fsl-imx6ul.h" +#include "hw/display/imx6ul_lcdif.h" #include "hw/misc/unimp.h" #include "hw/usb/imx-usb-phy.h" #include "hw/core/boards.h" @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) object_initialize_child(obj, name, &s->usb[i], TYPE_CHIPIDEA); } + /* + * LCDIF + */ + object_initialize_child(obj, "lcdif", &s->lcdif, TYPE_IMX6UL_LCDIF); + /* * SDHCIs */ @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) /* * LCD */ - create_unimplemented_device("lcdif", FSL_IMX6UL_LCDIF_ADDR, - FSL_IMX6UL_LCDIF_SIZE); + sysbus_realize(SYS_BUS_DEVICE(&s->lcdif), &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->lcdif), 0, FSL_IMX6UL_LCDIF_ADDR); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->lcdif), 0, + qdev_get_gpio_in(gic, FSL_IMX6UL_LCDIF_IRQ)); /* * CSU diff --git a/include/hw/arm/fsl-imx6ul.h b/include/hw/arm/fsl-imx6ul.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx6ul.h +++ b/include/hw/arm/fsl-imx6ul.h @@ -XXX,XX +XXX,XX @@ #include "hw/net/imx_fec.h" #include "hw/usb/chipidea.h" #include "hw/usb/imx-usb-phy.h" +#include "hw/display/imx6ul_lcdif.h" #include "system/memory.h" #include "target/arm/cpu.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct FslIMX6ULState { IMX2WdtState wdt[FSL_IMX6UL_NUM_WDTS]; IMXUSBPHYState usbphy[FSL_IMX6UL_NUM_USB_PHYS]; ChipideaState usb[FSL_IMX6UL_NUM_USBS]; + IMX6ULLCDIFState lcdif; MemoryRegion rom; MemoryRegion caam; MemoryRegion ocram; @@ -XXX,XX +XXX,XX @@ enum FslIMX6ULMemoryMap { FSL_IMX6UL_PXP_SIZE = (16 * KiB), FSL_IMX6UL_LCDIF_ADDR = 0x021C8000, - FSL_IMX6UL_LCDIF_SIZE = 0x100, + FSL_IMX6UL_LCDIF_SIZE = (16 * KiB), FSL_IMX6UL_CSI_ADDR = 0x021C4000, FSL_IMX6UL_CSI_SIZE = 0x100, -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> We have a registerfields interface which we can use for defining fields alongside helpers to access them. Define the basic syndrome layout and convert the helpers that take the imm16 data directly. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-2-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 75 ++++++++++++++++++++++++++++++++----------- 1 file changed, 57 insertions(+), 18 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ #ifndef TARGET_ARM_SYNDROME_H #define TARGET_ARM_SYNDROME_H -#include "qemu/bitops.h" +#include "hw/core/registerfields.h" /* Valid Syndrome Register EC field values */ enum arm_exception_class { @@ -XXX,XX +XXX,XX @@ enum arm_exception_class { EC_AA64_BKPT = 0x3c, }; +/* Generic syndrome encoding layout for HSR and lower 32 bits of ESR_EL2 */ +FIELD(SYNDROME, EC, 26, 6) +FIELD(SYNDROME, IL, 25, 1) +FIELD(SYNDROME, ISS, 0, 25) + typedef enum { SME_ET_AccessTrap, SME_ET_Streaming, @@ -XXX,XX +XXX,XX @@ typedef enum { static inline uint32_t syn_get_ec(uint32_t syn) { - return syn >> ARM_EL_EC_SHIFT; + return FIELD_EX32(syn, SYNDROME, EC); } static inline uint32_t syn_set_ec(uint32_t syn, uint32_t ec) { - return deposit32(syn, ARM_EL_EC_SHIFT, ARM_EL_EC_LENGTH, ec); + return FIELD_DP32(syn, SYNDROME, EC, ec); } /* @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_set_ec(uint32_t syn, uint32_t ec) */ static inline uint32_t syn_uncategorized(void) { - return (EC_UNCATEGORIZED << ARM_EL_EC_SHIFT) | ARM_EL_IL; + uint32_t res = syn_set_ec(0, EC_UNCATEGORIZED); + res = FIELD_DP32(res, SYNDROME, IL, 1); + return res; } +FIELD(ISS_IMM16, IMM16, 0, 16) + static inline uint32_t syn_aa64_svc(uint32_t imm16) { - return (EC_AA64_SVC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); + uint32_t res = syn_set_ec(0, EC_AA64_SVC); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); + return res; } static inline uint32_t syn_aa64_hvc(uint32_t imm16) { - return (EC_AA64_HVC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); + uint32_t res = syn_set_ec(0, EC_AA64_HVC); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); + return res; } static inline uint32_t syn_aa64_smc(uint32_t imm16) { - return (EC_AA64_SMC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); + uint32_t res = syn_set_ec(0, EC_AA64_SMC); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); + return res; } static inline uint32_t syn_aa32_svc(uint32_t imm16, bool is_16bit) { - return (EC_AA32_SVC << ARM_EL_EC_SHIFT) | (imm16 & 0xffff) - | (is_16bit ? 0 : ARM_EL_IL); + uint32_t res = syn_set_ec(0, EC_AA32_SVC); + res = FIELD_DP32(res, SYNDROME, IL, is_16bit ? 0 : 1); + res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); + return res; } static inline uint32_t syn_aa32_hvc(uint32_t imm16) { - return (EC_AA32_HVC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); + uint32_t res = syn_set_ec(0, EC_AA32_HVC); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); + return res; } static inline uint32_t syn_aa32_smc(void) { - return (EC_AA32_SMC << ARM_EL_EC_SHIFT) | ARM_EL_IL; + uint32_t res = syn_set_ec(0, EC_AA32_SMC); + res = FIELD_DP32(res, SYNDROME, IL, 1); + return res; } static inline uint32_t syn_aa64_bkpt(uint32_t imm16) { - return (EC_AA64_BKPT << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); + uint32_t res = syn_set_ec(0, EC_AA64_BKPT); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); + return res; } static inline uint32_t syn_aa32_bkpt(uint32_t imm16, bool is_16bit) { - return (EC_AA32_BKPT << ARM_EL_EC_SHIFT) | (imm16 & 0xffff) - | (is_16bit ? 0 : ARM_EL_IL); + uint32_t res = syn_set_ec(0, EC_AA32_BKPT); + res = FIELD_DP32(res, SYNDROME, IL, is_16bit ? 0 : 1); + res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); + return res; } static inline uint32_t syn_aa64_sysregtrap(int op0, int op1, int op2, @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_simd_access_trap(int cv, int cond, bool is_16bit) static inline uint32_t syn_sve_access_trap(void) { - return (EC_SVEACCESSTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL; + uint32_t res = syn_set_ec(0, EC_SVEACCESSTRAP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + return res; } /* @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit) static inline uint32_t syn_illegalstate(void) { - return (EC_ILLEGALSTATE << ARM_EL_EC_SHIFT) | ARM_EL_IL; + uint32_t res = syn_set_ec(0, EC_ILLEGALSTATE); + res = FIELD_DP32(res, SYNDROME, IL, 1); + return res; } static inline uint32_t syn_pcalignment(void) { - return (EC_PCALIGNMENT << ARM_EL_EC_SHIFT) | ARM_EL_IL; + uint32_t res = syn_set_ec(0, EC_PCALIGNMENT); + res = FIELD_DP32(res, SYNDROME, IL, 1); + return res; } static inline uint32_t syn_gcs_data_check(GCSInstructionType it, int rn) @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_gcs_gcsstr(int ra, int rn) static inline uint32_t syn_serror(uint32_t extra) { - return (EC_SERROR << ARM_EL_EC_SHIFT) | ARM_EL_IL | extra; + uint32_t res = syn_set_ec(0, EC_SERROR); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, SYNDROME, ISS, extra); + return res; } static inline uint32_t syn_mop(bool is_set, bool is_setg, int options, -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Migrate syn_aa64_sysregtrap and co-processor register trap syndromes to the registerfields API. The co-processor syndromes are split between single and duel register moves. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-3-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 124 ++++++++++++++++++++++++++++++++++-------- 1 file changed, 102 insertions(+), 22 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ enum arm_exception_class { /* Generic syndrome encoding layout for HSR and lower 32 bits of ESR_EL2 */ FIELD(SYNDROME, EC, 26, 6) -FIELD(SYNDROME, IL, 25, 1) +FIELD(SYNDROME, IL, 25, 1) /* IL=1 for 32 bit instructions */ FIELD(SYNDROME, ISS, 0, 25) typedef enum { @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_aa64_smc(uint32_t imm16) static inline uint32_t syn_aa32_svc(uint32_t imm16, bool is_16bit) { uint32_t res = syn_set_ec(0, EC_AA32_SVC); - res = FIELD_DP32(res, SYNDROME, IL, is_16bit ? 0 : 1); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); return res; } @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_aa64_bkpt(uint32_t imm16) static inline uint32_t syn_aa32_bkpt(uint32_t imm16, bool is_16bit) { uint32_t res = syn_set_ec(0, EC_AA32_BKPT); - res = FIELD_DP32(res, SYNDROME, IL, is_16bit ? 0 : 1); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); return res; } +/* + * ISS encoding for an exception from MSR, MRS, or System instruction + * in AArch64 state. + */ +FIELD(SYSREG_ISS, ISREAD, 0, 1) /* Direction, 1 is read */ +FIELD(SYSREG_ISS, CRM, 1, 4) +FIELD(SYSREG_ISS, RT, 5, 5) +FIELD(SYSREG_ISS, CRN, 10, 4) +FIELD(SYSREG_ISS, OP1, 14, 3) +FIELD(SYSREG_ISS, OP2, 17, 3) +FIELD(SYSREG_ISS, OP0, 20, 2) + static inline uint32_t syn_aa64_sysregtrap(int op0, int op1, int op2, int crn, int crm, int rt, int isread) { - return (EC_SYSTEMREGISTERTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL - | (op0 << 20) | (op2 << 17) | (op1 << 14) | (crn << 10) | (rt << 5) - | (crm << 1) | isread; + uint32_t res = syn_set_ec(0, EC_SYSTEMREGISTERTRAP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, SYSREG_ISS, OP0, op0); + res = FIELD_DP32(res, SYSREG_ISS, OP2, op2); + res = FIELD_DP32(res, SYSREG_ISS, OP1, op1); + res = FIELD_DP32(res, SYSREG_ISS, CRN, crn); + res = FIELD_DP32(res, SYSREG_ISS, RT, rt); + res = FIELD_DP32(res, SYSREG_ISS, CRM, crm); + res = FIELD_DP32(res, SYSREG_ISS, ISREAD, isread); + + return res; } +/* + * ISS encoding for an exception from an MCR or MRC access + * (move to/from co-processor) + */ +FIELD(COPROC_ISS, ISREAD, 0, 1) +FIELD(COPROC_ISS, CRM, 1, 4) +FIELD(COPROC_ISS, RT, 5, 5) +FIELD(COPROC_ISS, CRN, 10, 4) +FIELD(COPROC_ISS, OP1, 14, 3) +FIELD(COPROC_ISS, OP2, 17, 3) +FIELD(COPROC_ISS, COND, 20, 4) +FIELD(COPROC_ISS, CV, 24, 1) + static inline uint32_t syn_cp14_rt_trap(int cv, int cond, int opc1, int opc2, int crn, int crm, int rt, int isread, bool is_16bit) { - return (EC_CP14RTTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | (opc2 << 17) | (opc1 << 14) - | (crn << 10) | (rt << 5) | (crm << 1) | isread; + uint32_t res = syn_set_ec(0, EC_CP14RTTRAP); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); + + res = FIELD_DP32(res, COPROC_ISS, CV, cv); + res = FIELD_DP32(res, COPROC_ISS, COND, cond); + res = FIELD_DP32(res, COPROC_ISS, OP2, opc2); + res = FIELD_DP32(res, COPROC_ISS, OP1, opc1); + res = FIELD_DP32(res, COPROC_ISS, CRN, crn); + res = FIELD_DP32(res, COPROC_ISS, RT, rt); + res = FIELD_DP32(res, COPROC_ISS, CRM, crm); + res = FIELD_DP32(res, COPROC_ISS, ISREAD, isread); + + return res; } static inline uint32_t syn_cp15_rt_trap(int cv, int cond, int opc1, int opc2, int crn, int crm, int rt, int isread, bool is_16bit) { - return (EC_CP15RTTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | (opc2 << 17) | (opc1 << 14) - | (crn << 10) | (rt << 5) | (crm << 1) | isread; + uint32_t res = syn_set_ec(0, EC_CP15RTTRAP); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); + + res = FIELD_DP32(res, COPROC_ISS, CV, cv); + res = FIELD_DP32(res, COPROC_ISS, COND, cond); + res = FIELD_DP32(res, COPROC_ISS, OP2, opc2); + res = FIELD_DP32(res, COPROC_ISS, OP1, opc1); + res = FIELD_DP32(res, COPROC_ISS, CRN, crn); + res = FIELD_DP32(res, COPROC_ISS, RT, rt); + res = FIELD_DP32(res, COPROC_ISS, CRM, crm); + res = FIELD_DP32(res, COPROC_ISS, ISREAD, isread); + + return res; } +/* + * ISS encoding for an exception from an MCRR or MRRC access + * (move to/from co-processor with 2 regs) + */ +FIELD(COPROC_R2_ISS, ISREAD, 0, 1) +FIELD(COPROC_R2_ISS, CRM, 1, 4) +FIELD(COPROC_R2_ISS, RT, 5, 5) +FIELD(COPROC_R2_ISS, RT2, 10, 5) +FIELD(COPROC_R2_ISS, OP1, 16, 4) +FIELD(COPROC_R2_ISS, COND, 20, 4) +FIELD(COPROC_R2_ISS, CV, 24, 1) + static inline uint32_t syn_cp14_rrt_trap(int cv, int cond, int opc1, int crm, int rt, int rt2, int isread, bool is_16bit) { - return (EC_CP14RRTTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | (opc1 << 16) - | (rt2 << 10) | (rt << 5) | (crm << 1) | isread; + uint32_t res = syn_set_ec(0, EC_CP14RRTTRAP); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); + + res = FIELD_DP32(res, COPROC_R2_ISS, CV, cv); + res = FIELD_DP32(res, COPROC_R2_ISS, COND, cond); + res = FIELD_DP32(res, COPROC_R2_ISS, OP1, opc1); + res = FIELD_DP32(res, COPROC_R2_ISS, RT2, rt2); + res = FIELD_DP32(res, COPROC_R2_ISS, RT, rt); + res = FIELD_DP32(res, COPROC_R2_ISS, CRM, crm); + res = FIELD_DP32(res, COPROC_R2_ISS, ISREAD, isread); + + return res; } static inline uint32_t syn_cp15_rrt_trap(int cv, int cond, int opc1, int crm, int rt, int rt2, int isread, bool is_16bit) { - return (EC_CP15RRTTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | (opc1 << 16) - | (rt2 << 10) | (rt << 5) | (crm << 1) | isread; + uint32_t res = syn_set_ec(0, EC_CP15RRTTRAP); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); + + res = FIELD_DP32(res, COPROC_R2_ISS, CV, cv); + res = FIELD_DP32(res, COPROC_R2_ISS, COND, cond); + res = FIELD_DP32(res, COPROC_R2_ISS, OP1, opc1); + res = FIELD_DP32(res, COPROC_R2_ISS, RT2, rt2); + res = FIELD_DP32(res, COPROC_R2_ISS, RT, rt); + res = FIELD_DP32(res, COPROC_R2_ISS, CRM, crm); + res = FIELD_DP32(res, COPROC_R2_ISS, ISREAD, isread); + + return res; } static inline uint32_t syn_fp_access_trap(int cv, int cond, bool is_16bit, -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> The syn_simd_access trap was never used so remove it. We should only see the COPROC encoding on v7 architectures. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-4-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 25 +++++++++++++++---------- 1 file changed, 15 insertions(+), 10 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_cp15_rrt_trap(int cv, int cond, int opc1, int crm, return res; } +/* + * ISS encoding for an exception from an access to a register of + * instruction resulting from the FPEN or TFP traps. + */ +FIELD(FP_ISS, COPROC, 0, 4) /* ARMv7 only */ +FIELD(FP_ISS, COND, 20, 4) +FIELD(FP_ISS, CV, 24, 1) + static inline uint32_t syn_fp_access_trap(int cv, int cond, bool is_16bit, int coproc) { /* AArch32 FP trap or any AArch64 FP/SIMD trap: TA == 0 */ - return (EC_ADVSIMDFPACCESSTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | coproc; -} + uint32_t res = syn_set_ec(0, EC_ADVSIMDFPACCESSTRAP); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); -static inline uint32_t syn_simd_access_trap(int cv, int cond, bool is_16bit) -{ - /* AArch32 SIMD trap: TA == 1 coproc == 0 */ - return (EC_ADVSIMDFPACCESSTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | (1 << 5); + res = FIELD_DP32(res, FP_ISS, CV, cv); + res = FIELD_DP32(res, FP_ISS, COND, cond); + res = FIELD_DP32(res, FP_ISS, COPROC, coproc); + + return res; } static inline uint32_t syn_sve_access_trap(void) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> For simplicity keep the OP as a two bit field rather than the two interlinked fields in the docs (ERET/ERETA). Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-5-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_sve_access_trap(void) } /* + * ISS encoding for an exception from an ERET, ERETAA or ERETAB + * instructions. + * * eret_op is bits [1:0] of the ERET instruction, so: * 0 for ERET, 2 for ERETAA, 3 for ERETAB. */ +FIELD(ERET_ISS, OP, 0, 2) + static inline uint32_t syn_erettrap(int eret_op) { - return (EC_ERETTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL | eret_op; + uint32_t res = syn_set_ec(0, EC_ERETTRAP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, ERET_ISS, OP, eret_op); + + return res; } static inline uint32_t syn_smetrap(SMEExceptionType etype, bool is_16bit) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-6-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_erettrap(int eret_op) return res; } +/* + * ISS encoding for an exception due to SME functionality + */ +FIELD(SME_ISS, SMTC, 0, 2) + static inline uint32_t syn_smetrap(SMEExceptionType etype, bool is_16bit) { - return (EC_SMETRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) | etype; + uint32_t res = syn_set_ec(0, EC_SMETRAP); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); + res = FIELD_DP32(res, SME_ISS, SMTC, etype); + + return res; } static inline uint32_t syn_pacfail(bool data, int keynumber) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> syn_pactrap is fairly simple as the ISS is all RES0. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-7-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 23 ++++++++++++++++++++--- 1 file changed, 20 insertions(+), 3 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_smetrap(SMEExceptionType etype, bool is_16bit) return res; } +/* + * ISS encoding for a PAC Fail exceptions + */ +FIELD(PACFAIL_ISS, BnA, 0, 1) /* B key or A key */ +FIELD(PACFAIL_ISS, DnI, 1, 1) /* Data or Instruction */ + static inline uint32_t syn_pacfail(bool data, int keynumber) { - int error_code = (data << 1) | keynumber; - return (EC_PACFAIL << ARM_EL_EC_SHIFT) | ARM_EL_IL | error_code; + uint32_t res = syn_set_ec(0, EC_PACFAIL); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, PACFAIL_ISS, DnI, data); + res = FIELD_DP32(res, PACFAIL_ISS, BnA, keynumber); + + return res; } +/* + * ISS encoding for an exception from a trapped Pointer + * Authentication instruction is RES0 + */ static inline uint32_t syn_pactrap(void) { - return (EC_PACTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL; + uint32_t res = syn_set_ec(0, EC_PACTRAP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + return res; } static inline uint32_t syn_btitrap(int btype) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-8-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_pactrap(void) return res; } +/* + * ISS encoding for an exception from a Branch Target Identification + * instruction. + */ +FIELD(BTI_ISS, BTYPE, 0, 2) + static inline uint32_t syn_btitrap(int btype) { - return (EC_BTITRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL | btype; + uint32_t res = syn_set_ec(0, EC_BTITRAP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, BTI_ISS, BTYPE, btype); + return res; } static inline uint32_t syn_bxjtrap(int cv, int cond, int rm) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> This is an Armv7 specific syndrome for chips with Jazelle functionality. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-9-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_btitrap(int btype) return res; } +/* + * ISS encoding for trapped BXJ execution + * + * This is an Armv7 encoding. + */ +FIELD(BXJ_ISS, RM, 0, 4) +/* bits 4:19 are Reserved, UNK/SBZP */ +FIELD(BXJ_ISS, COND, 20, 4) +FIELD(BXJ_ISS, CV, 24, 1) + static inline uint32_t syn_bxjtrap(int cv, int cond, int rm) { - return (EC_BXJTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL | - (cv << 24) | (cond << 20) | rm; + uint32_t res = syn_set_ec(0, EC_BXJTRAP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, BXJ_ISS, CV, cv); + res = FIELD_DP32(res, BXJ_ISS, COND, cond); + res = FIELD_DP32(res, BXJ_ISS, RM, rm); + + return res; } static inline uint32_t syn_gpc(int s2ptw, int ind, int gpcsc, int vncr, -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-10-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 30 +++++++++++++++++++++++++++--- 1 file changed, 27 insertions(+), 3 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_bxjtrap(int cv, int cond, int rm) return res; } +/* + * ISS encoding for a Granule Protection Check exception + * + * These are only reported to EL3 + */ +FIELD(GPC_ISS, xFSC, 0, 6) +FIELD(GPC_ISS, WnR, 6, 1) /* Write not Read */ +FIELD(GPC_ISS, S1PTW, 7, 1) +FIELD(GPC_ISS, CM, 8, 1) +FIELD(GPC_ISS, VNCR, 13, 1) +FIELD(GPC_ISS, GPCSC, 14, 6) +FIELD(GPC_ISS, InD, 20, 1) /* Instruction not Data access */ +FIELD(GPC_ISS, S2PTW, 21, 1) + static inline uint32_t syn_gpc(int s2ptw, int ind, int gpcsc, int vncr, int cm, int s1ptw, int wnr, int fsc) { - return (EC_GPC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (s2ptw << 21) - | (ind << 20) | (gpcsc << 14) | (vncr << 13) | (cm << 8) - | (s1ptw << 7) | (wnr << 6) | fsc; + uint32_t res = syn_set_ec(0, EC_GPC); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, GPC_ISS, S2PTW, s2ptw); + res = FIELD_DP32(res, GPC_ISS, InD, ind); + res = FIELD_DP32(res, GPC_ISS, GPCSC, gpcsc); + res = FIELD_DP32(res, GPC_ISS, VNCR, vncr); + res = FIELD_DP32(res, GPC_ISS, CM, cm); + res = FIELD_DP32(res, GPC_ISS, S1PTW, s1ptw); + res = FIELD_DP32(res, GPC_ISS, WnR, wnr); + res = FIELD_DP32(res, GPC_ISS, xFSC, fsc); + + return res; } static inline uint32_t syn_insn_abort(int same_el, int ea, int s1ptw, int fsc) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Migrate syn_insn_abort and syn_data_abort_* to the registerfields API. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20260422125250.1303100-11-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 87 ++++++++++++++++++++++++++++++++++++------- 1 file changed, 74 insertions(+), 13 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_gpc(int s2ptw, int ind, int gpcsc, int vncr, return res; } +/* + * ISS encoding for an exception from an Instruction Abort + * + * (aka instruction abort) + */ +FIELD(IABORT_ISS, IFSC, 0, 6) +FIELD(IABORT_ISS, S1PTW, 7, 1) +FIELD(IABORT_ISS, EA, 9, 1) +FIELD(IABORT_ISS, FnV, 10, 1) /* FAR not Valid */ +FIELD(IABORT_ISS, SET, 11, 2) +FIELD(IABORT_ISS, PFV, 14, 1) +FIELD(IABORT_ISS, TopLevel, 21, 1) /* FEAT_THE */ + static inline uint32_t syn_insn_abort(int same_el, int ea, int s1ptw, int fsc) { - return (EC_INSNABORT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | ARM_EL_IL | (ea << 9) | (s1ptw << 7) | fsc; + uint32_t res = syn_set_ec(0, EC_INSNABORT + same_el); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, IABORT_ISS, EA, ea); + res = FIELD_DP32(res, IABORT_ISS, S1PTW, s1ptw); + res = FIELD_DP32(res, IABORT_ISS, IFSC, fsc); + + return res; } +/* + * ISS encoding for an exception from a Data Abort + */ +FIELD(DABORT_ISS, DFSC, 0, 6) +FIELD(DABORT_ISS, WNR, 6, 1) +FIELD(DABORT_ISS, S1PTW, 7, 1) +FIELD(DABORT_ISS, CM, 8, 1) +FIELD(DABORT_ISS, EA, 9, 1) +FIELD(DABORT_ISS, FnV, 10, 1) +FIELD(DABORT_ISS, LST, 11, 2) +FIELD(DABORT_ISS, VNCR, 13, 1) +FIELD(DABORT_ISS, AR, 14, 1) +FIELD(DABORT_ISS, SF, 15, 1) +FIELD(DABORT_ISS, SRT, 16, 5) +FIELD(DABORT_ISS, SSE, 21, 1) +FIELD(DABORT_ISS, SAS, 22, 2) +FIELD(DABORT_ISS, ISV, 24, 1) + static inline uint32_t syn_data_abort_no_iss(int same_el, int fnv, int ea, int cm, int s1ptw, int wnr, int fsc) { - return (EC_DATAABORT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | ARM_EL_IL - | (fnv << 10) | (ea << 9) | (cm << 8) | (s1ptw << 7) - | (wnr << 6) | fsc; + uint32_t res = syn_set_ec(0, EC_DATAABORT + same_el); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, DABORT_ISS, FnV, fnv); + res = FIELD_DP32(res, DABORT_ISS, EA, ea); + res = FIELD_DP32(res, DABORT_ISS, CM, cm); + res = FIELD_DP32(res, DABORT_ISS, S1PTW, s1ptw); + res = FIELD_DP32(res, DABORT_ISS, WNR, wnr); + res = FIELD_DP32(res, DABORT_ISS, DFSC, fsc); + + return res; } static inline uint32_t syn_data_abort_with_iss(int same_el, @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_data_abort_with_iss(int same_el, int wnr, int fsc, bool is_16bit) { - return (EC_DATAABORT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | ARM_EL_ISV | (sas << 22) | (sse << 21) | (srt << 16) - | (sf << 15) | (ar << 14) - | (ea << 9) | (cm << 8) | (s1ptw << 7) | (wnr << 6) | fsc; + uint32_t res = syn_set_ec(0, EC_DATAABORT + same_el); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); + + res = FIELD_DP32(res, DABORT_ISS, ISV, 1); + res = FIELD_DP32(res, DABORT_ISS, SAS, sas); + res = FIELD_DP32(res, DABORT_ISS, SSE, sse); + res = FIELD_DP32(res, DABORT_ISS, SRT, srt); + res = FIELD_DP32(res, DABORT_ISS, SF, sf); + res = FIELD_DP32(res, DABORT_ISS, AR, ar); + res = FIELD_DP32(res, DABORT_ISS, EA, ea); + res = FIELD_DP32(res, DABORT_ISS, CM, cm); + res = FIELD_DP32(res, DABORT_ISS, S1PTW, s1ptw); + res = FIELD_DP32(res, DABORT_ISS, WNR, wnr); + res = FIELD_DP32(res, DABORT_ISS, DFSC, fsc); + + return res; } /* @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_data_abort_with_iss(int same_el, */ static inline uint32_t syn_data_abort_vncr(int ea, int wnr, int fsc) { - return (EC_DATAABORT << ARM_EL_EC_SHIFT) | (1 << ARM_EL_EC_SHIFT) - | ARM_EL_IL | ARM_EL_VNCR | (wnr << 6) | fsc; + uint32_t res = syn_set_ec(0, EC_DATAABORT_SAME_EL); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, DABORT_ISS, VNCR, 1); + res = FIELD_DP32(res, DABORT_ISS, WNR, wnr); + res = FIELD_DP32(res, DABORT_ISS, DFSC, fsc); + + return res; } static inline uint32_t syn_swstep(int same_el, int isv, int ex) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Migrate syn_swstep, syn_watchpoint and syn_breakpoint to the registerfields API. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-12-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 54 ++++++++++++++++++++++++++++++++++++++----- 1 file changed, 48 insertions(+), 6 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_data_abort_vncr(int ea, int wnr, int fsc) return res; } +/* + * ISS encoding for an exception from a Software Step exception. + */ +FIELD(SOFTSTEP_ISS, IFSC, 0, 6) +FIELD(SOFTSTEP_ISS, EX, 6, 1) +FIELD(SOFTSTEP_ISS, ISV, 24, 1) + static inline uint32_t syn_swstep(int same_el, int isv, int ex) { - return (EC_SOFTWARESTEP << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | ARM_EL_IL | (isv << 24) | (ex << 6) | 0x22; + uint32_t res = syn_set_ec(0, EC_SOFTWARESTEP + same_el); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, SOFTSTEP_ISS, ISV, isv); + res = FIELD_DP32(res, SOFTSTEP_ISS, EX, ex); + res = FIELD_DP32(res, SOFTSTEP_ISS, IFSC, 0x22); + + return res; } +/* + * ISS encoding for an exception from a Watchpoint exception + */ +FIELD(WATCHPOINT_ISS, DFSC, 0, 6) +FIELD(WATCHPOINT_ISS, WNR, 6, 1) +FIELD(WATCHPOINT_ISS, CM, 8, 1) +FIELD(WATCHPOINT_ISS, FnV, 10, 1) +FIELD(WATCHPOINT_ISS, VNCR, 13, 1) /* FEAT_NV2 */ +FIELD(WATCHPOINT_ISS, FnP, 15, 1) +FIELD(WATCHPOINT_ISS, WPF, 16, 1) +/* bellow mandatory from FEAT_Debugv8p9 */ +FIELD(WATCHPOINT_ISS, WPTV, 17, 1) /* FEAT_Debugv8p2 - WPT valid */ +FIELD(WATCHPOINT_ISS, WPT, 18, 6) /* FEAT_Debugv8p2 - missing WP number */ + static inline uint32_t syn_watchpoint(int same_el, int cm, int wnr) { - return (EC_WATCHPOINT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | ARM_EL_IL | (cm << 8) | (wnr << 6) | 0x22; + uint32_t res = syn_set_ec(0, EC_WATCHPOINT + same_el); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, WATCHPOINT_ISS, CM, cm); + res = FIELD_DP32(res, WATCHPOINT_ISS, WNR, wnr); + res = FIELD_DP32(res, WATCHPOINT_ISS, DFSC, 0x22); + + return res; } +/* + * ISS encoding for an exception from a Breakpoint or a Vector Catch + * debug exception. + */ +FIELD(BREAKPOINT_ISS, IFSC, 0, 6) + static inline uint32_t syn_breakpoint(int same_el) { - return (EC_BREAKPOINT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | ARM_EL_IL | 0x22; + uint32_t res = syn_set_ec(0, EC_BREAKPOINT + same_el); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, BREAKPOINT_ISS, IFSC, 0x22); + + return res; } static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> This will help later when we expand the fields we report. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-13-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_breakpoint(int same_el) return res; } +/* + * ISS encoding for an exception from a WF* instruction + */ +FIELD(WFX_ISS, TI, 0, 2) +FIELD(WFX_ISS, RV, 2, 1) +FIELD(WFX_ISS, RN, 5, 5) +FIELD(WFX_ISS, COND, 20, 4) +FIELD(WFX_ISS, CV, 24, 1) + static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit) { - return (EC_WFX_TRAP << ARM_EL_EC_SHIFT) | - (is_16bit ? 0 : (1 << ARM_EL_IL_SHIFT)) | - (cv << 24) | (cond << 20) | ti; + uint32_t res = syn_set_ec(0, EC_WFX_TRAP); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); + + res = FIELD_DP32(res, WFX_ISS, CV, cv); + res = FIELD_DP32(res, WFX_ISS, COND, cond); + res = FIELD_DP32(res, WFX_ISS, TI, ti); + + return res; } static inline uint32_t syn_illegalstate(void) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Tweak arg names to make it clear raddr is the data address register number. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-14-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 39 +++++++++++++++++++++++++++++++++------ 1 file changed, 33 insertions(+), 6 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_pcalignment(void) return res; } +/* + * ISS encoding for a GCS exception + * + * Field validity depends on EXTYPE + */ +FIELD(GCS_ISS, IT, 0, 5) +FIELD(GCS_ISS, RN, 5, 5) /* only for non EXLOCK exceptions */ +FIELD(GCS_ISS, RADDR, 10, 5) /* only for GCSSTR/GCSSTTR traps */ +FIELD(GCS_ISS, EXTYPE, 20, 4) + static inline uint32_t syn_gcs_data_check(GCSInstructionType it, int rn) { - return ((EC_GCS << ARM_EL_EC_SHIFT) | ARM_EL_IL | - (GCS_ET_DataCheck << 20) | (rn << 5) | it); + uint32_t res = syn_set_ec(0, EC_GCS); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, GCS_ISS, EXTYPE, GCS_ET_DataCheck); + res = FIELD_DP32(res, GCS_ISS, RN, rn); + res = FIELD_DP32(res, GCS_ISS, IT, it); + + return res; } static inline uint32_t syn_gcs_exlock(void) { - return (EC_GCS << ARM_EL_EC_SHIFT) | ARM_EL_IL | (GCS_ET_EXLOCK << 20); + uint32_t res = syn_set_ec(0, EC_GCS); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, GCS_ISS, EXTYPE, GCS_ET_EXLOCK); + + return res; } -static inline uint32_t syn_gcs_gcsstr(int ra, int rn) +static inline uint32_t syn_gcs_gcsstr(int raddr, int rn) { - return ((EC_GCS << ARM_EL_EC_SHIFT) | ARM_EL_IL | - (GCS_ET_GCSSTR_GCSSTTR << 20) | (ra << 10) | (rn << 5)); + uint32_t res = syn_set_ec(0, EC_GCS); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, GCS_ISS, EXTYPE, GCS_ET_GCSSTR_GCSSTTR); + res = FIELD_DP32(res, GCS_ISS, RADDR, raddr); + res = FIELD_DP32(res, GCS_ISS, RN, rn); + + return res; } static inline uint32_t syn_serror(uint32_t extra) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-15-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 33 +++++++++++++++++++++++++++++---- 1 file changed, 29 insertions(+), 4 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_serror(uint32_t extra) return res; } +/* + * ISS encoding for an exception from the Memory Copy and Memory Set + * instructions. + */ +FIELD(MOP_ISS, SIZEREG, 0, 5) +FIELD(MOP_ISS, SRCREG, 5, 5) +FIELD(MOP_ISS, DESTREG, 10, 5) +FIELD(MOP_ISS, FORMATOPT, 16, 2) +FIELD(MOP_ISS, OPT_A, 16, 1) +FIELD(MOP_ISS, WRONG_OPT, 17, 1) +FIELD(MOP_ISS, EPILOGUE, 18, 1) +FIELD(MOP_ISS, OPTIONS, 19, 4) +FIELD(MOP_ISS, IS_SETG, 23, 1) +FIELD(MOP_ISS, MEMINST, 24, 1) + static inline uint32_t syn_mop(bool is_set, bool is_setg, int options, bool epilogue, bool wrong_option, bool option_a, int destreg, int srcreg, int sizereg) { - return (EC_MOP << ARM_EL_EC_SHIFT) | ARM_EL_IL | - (is_set << 24) | (is_setg << 23) | (options << 19) | - (epilogue << 18) | (wrong_option << 17) | (option_a << 16) | - (destreg << 10) | (srcreg << 5) | sizereg; + uint32_t res = syn_set_ec(0, EC_MOP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, MOP_ISS, MEMINST, is_set); + res = FIELD_DP32(res, MOP_ISS, IS_SETG, is_setg); + res = FIELD_DP32(res, MOP_ISS, OPTIONS, options); + res = FIELD_DP32(res, MOP_ISS, EPILOGUE, epilogue); + res = FIELD_DP32(res, MOP_ISS, WRONG_OPT, wrong_option); + res = FIELD_DP32(res, MOP_ISS, OPT_A, option_a); + res = FIELD_DP32(res, MOP_ISS, DESTREG, destreg); + res = FIELD_DP32(res, MOP_ISS, SRCREG, srcreg); + res = FIELD_DP32(res, MOP_ISS, SIZEREG, sizereg); + + return res; } -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> It shares the same COPROC_ISS encoding as the other CP traps although not all the fields are used. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-16-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 16 ++++++++++++++++ target/arm/tcg/vfp_helper.c | 5 +---- 2 files changed, 17 insertions(+), 4 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ FIELD(COPROC_ISS, OP2, 17, 3) FIELD(COPROC_ISS, COND, 20, 4) FIELD(COPROC_ISS, CV, 24, 1) +static inline uint32_t syn_cp10_rt_trap(int cv, int cond, int opc1, + int crn, int rt, int isread) +{ + uint32_t res = syn_set_ec(0, EC_FPIDTRAP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, COPROC_ISS, CV, cv); + res = FIELD_DP32(res, COPROC_ISS, COND, cond); + res = FIELD_DP32(res, COPROC_ISS, OP1, opc1); + res = FIELD_DP32(res, COPROC_ISS, CRN, crn); + res = FIELD_DP32(res, COPROC_ISS, RT, rt); + res = FIELD_DP32(res, COPROC_ISS, ISREAD, isread); + + return res; +} + static inline uint32_t syn_cp14_rt_trap(int cv, int cond, int opc1, int opc2, int crn, int crm, int rt, int isread, bool is_16bit) diff --git a/target/arm/tcg/vfp_helper.c b/target/arm/tcg/vfp_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/vfp_helper.c +++ b/target/arm/tcg/vfp_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(check_hcr_el2_trap)(CPUARMState *env, uint32_t rt, uint32_t reg) g_assert_not_reached(); } - syndrome = ((EC_FPIDTRAP << ARM_EL_EC_SHIFT) - | ARM_EL_IL - | (1 << 24) | (0xe << 20) | (7 << 14) - | (reg << 10) | (rt << 5) | 1); + syndrome = syn_cp10_rt_trap(1, 0xe, 7, reg, rt, 1); raise_exception(env, EXCP_HYP_TRAP, syndrome, 2); } -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> One more step towards dropping the old #defines. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-17-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch32_hyp(CPUState *cs) */ if (cs->exception_index == EXCP_PREFETCH_ABORT || (cs->exception_index == EXCP_DATA_ABORT && - !(env->exception.syndrome & ARM_EL_ISV)) || + !FIELD_EX32(env->exception.syndrome, SYNDROME, IL)) || syn_get_ec(env->exception.syndrome) == EC_UNCATEGORIZED) { - env->exception.syndrome &= ~ARM_EL_IL; + env->exception.syndrome = FIELD_DP32(env->exception.syndrome, SYNDROME, IL, 0); } } env->cp15.esr_el[2] = env->exception.syndrome; -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> This removes the last use of ARM_EL_EC_SHIFT. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-18-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 1 - target/arm/tcg/debug.c | 2 +- 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ typedef enum { } GCSInstructionType; #define ARM_EL_EC_LENGTH 6 -#define ARM_EL_EC_SHIFT 26 #define ARM_EL_IL_SHIFT 25 #define ARM_EL_ISV_SHIFT 24 #define ARM_EL_IL (1 << ARM_EL_IL_SHIFT) diff --git a/target/arm/tcg/debug.c b/target/arm/tcg/debug.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/debug.c +++ b/target/arm/tcg/debug.c @@ -XXX,XX +XXX,XX @@ raise_exception_debug(CPUARMState *env, uint32_t excp, uint32_t syndrome) * Similarly for watchpoint and breakpoint matches. */ assert(debug_el >= cur_el); - syndrome |= (debug_el == cur_el) << ARM_EL_EC_SHIFT; + syndrome |= (debug_el == cur_el) << R_SYNDROME_EC_SHIFT; raise_exception(env, excp, syndrome, debug_el); } -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Rather than open coding a bunch of shifts and masks we can use the syndrome definitions. While we are at it assert it really is a EC_DATAABORT. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-19-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/whpx/whpx-all.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/target/arm/whpx/whpx-all.c b/target/arm/whpx/whpx-all.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/whpx/whpx-all.c +++ b/target/arm/whpx/whpx-all.c @@ -XXX,XX +XXX,XX @@ static int whpx_handle_mmio(CPUState *cpu, WHV_MEMORY_ACCESS_CONTEXT *ctx) { uint64_t syndrome = ctx->Syndrome; - bool isv = syndrome & ARM_EL_ISV; - bool iswrite = (syndrome >> 6) & 1; - bool sse = (syndrome >> 21) & 1; - uint32_t sas = (syndrome >> 22) & 3; + bool isv = FIELD_EX32(syndrome, DABORT_ISS, ISV); + bool iswrite = FIELD_EX32(syndrome, DABORT_ISS, WNR); + bool sse = FIELD_EX32(syndrome, DABORT_ISS, SSE); + uint32_t sas = FIELD_EX32(syndrome, DABORT_ISS, SAS); uint32_t len = 1 << sas; - uint32_t srt = (syndrome >> 16) & 0x1f; - uint32_t cm = (syndrome >> 8) & 0x1; + uint32_t srt = FIELD_EX32(syndrome, DABORT_ISS, SRT); + uint32_t cm = FIELD_EX32(syndrome, DABORT_ISS, CM); uint64_t val = 0; + assert(syn_get_ec(syndrome) == EC_DATAABORT); assert(!cm); assert(isv); -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Rather than open coding a bunch of shifts and masks we can use the syndrome definitions. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20260422125250.1303100-20-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/hvf/hvf.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/target/arm/hvf/hvf.c b/target/arm/hvf/hvf.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/hvf/hvf.c +++ b/target/arm/hvf/hvf.c @@ -XXX,XX +XXX,XX @@ static int hvf_handle_exception(CPUState *cpu, hv_vcpu_exit_exception_t *excp) break; } case EC_DATAABORT: { - bool isv = syndrome & ARM_EL_ISV; - bool iswrite = (syndrome >> 6) & 1; - bool s1ptw = (syndrome >> 7) & 1; - bool sse = (syndrome >> 21) & 1; - uint32_t sas = (syndrome >> 22) & 3; + bool isv = FIELD_EX32(syndrome, DABORT_ISS, ISV); + bool iswrite = FIELD_EX32(syndrome, DABORT_ISS, WNR); + bool s1ptw = FIELD_EX32(syndrome, DABORT_ISS, S1PTW); + bool sse = FIELD_EX32(syndrome, DABORT_ISS, SSE); + uint32_t sas = FIELD_EX32(syndrome, DABORT_ISS, SAS); uint32_t len = 1 << sas; - uint32_t srt = (syndrome >> 16) & 0x1f; - uint32_t cm = (syndrome >> 8) & 0x1; + uint32_t srt = FIELD_EX32(syndrome, DABORT_ISS, SRT); + uint32_t cm = FIELD_EX32(syndrome, DABORT_ISS, CM); uint64_t val = 0; uint64_t ipa = excp->physical_address; AddressSpace *as = cpu_get_address_space(cpu, ARMASIdx_NS); -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> One more step to removing the old defines. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-21-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/tlb_helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/tcg/tlb_helper.c b/target/arm/tcg/tlb_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/tlb_helper.c +++ b/target/arm/tcg/tlb_helper.c @@ -XXX,XX +XXX,XX @@ static inline uint64_t merge_syn_data_abort(uint32_t template_syn, */ assert(!fi->stage2); syn = syn_data_abort_vncr(fi->ea, is_write, fsc); - } else if (!(template_syn & ARM_EL_ISV) || target_el != 2 + } else if (!FIELD_EX32(template_syn, DABORT_ISS, ISV) || target_el != 2 || fi->s1ptw || !fi->stage2) { syn = syn_data_abort_no_iss(same_el, 0, fi->ea, 0, fi->s1ptw, is_write, fsc); -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> These are only valid for data abort syndromes. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-22-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/tlb_helper.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/tcg/tlb_helper.c b/target/arm/tcg/tlb_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/tlb_helper.c +++ b/target/arm/tcg/tlb_helper.c @@ -XXX,XX +XXX,XX @@ static inline uint64_t merge_syn_data_abort(uint32_t template_syn, * ST64BV, or ST64BV0 insns report syndrome info even for stage-1 * faults and regardless of the target EL. */ - if (template_syn & ARM_EL_VNCR) { + if (FIELD_EX32(template_syn, DABORT_ISS, VNCR)) { /* * FEAT_NV2 faults on accesses via VNCR_EL2 are a special case: * they are always reported as "same EL", even though we are going @@ -XXX,XX +XXX,XX @@ void arm_deliver_fault(ARMCPU *cpu, vaddr addr, * because we masked that out in disas_set_insn_syndrome()) */ bool is_vncr = (access_type != MMU_INST_FETCH) && - (env->exception.syndrome & ARM_EL_VNCR); + FIELD_EX32(env->exception.syndrome, DABORT_ISS, VNCR); if (is_vncr) { /* FEAT_NV2 faults on accesses via VNCR_EL2 go to EL2 */ -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Now everything is defined with registerfields we can drop the old defines. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-23-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 9 --------- 1 file changed, 9 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ typedef enum { GCS_IT_GCSPOPX = 9, } GCSInstructionType; -#define ARM_EL_EC_LENGTH 6 -#define ARM_EL_IL_SHIFT 25 -#define ARM_EL_ISV_SHIFT 24 -#define ARM_EL_IL (1 << ARM_EL_IL_SHIFT) -#define ARM_EL_ISV (1 << ARM_EL_ISV_SHIFT) - -/* In the Data Abort syndrome */ -#define ARM_EL_VNCR (1 << 13) - static inline uint32_t syn_get_ec(uint32_t syn) { return FIELD_EX32(syn, SYNDROME, EC); -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Pass the register number (rd) to the wfit helper and report it in the syndrome ISS. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-24-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 11 ++++++++++- target/arm/tcg/helper-defs.h | 2 +- target/arm/tcg/op_helper.c | 7 ++++--- target/arm/tcg/translate-a64.c | 2 +- 4 files changed, 16 insertions(+), 6 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ FIELD(WFX_ISS, RN, 5, 5) FIELD(WFX_ISS, COND, 20, 4) FIELD(WFX_ISS, CV, 24, 1) -static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit) +typedef enum { + WFI = 0b00, + WFE = 0b01, + WFIT = 0b10, + WFET = 0xb11 +} wfx_ti; + +static inline uint32_t syn_wfx(int cv, int cond, int rn, bool rv, wfx_ti ti, bool is_16bit) { uint32_t res = syn_set_ec(0, EC_WFX_TRAP); res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit) res = FIELD_DP32(res, WFX_ISS, CV, cv); res = FIELD_DP32(res, WFX_ISS, COND, cond); res = FIELD_DP32(res, WFX_ISS, TI, ti); + res = FIELD_DP32(res, WFX_ISS, RN, rn); + res = FIELD_DP32(res, WFX_ISS, RV, rv); return res; } diff --git a/target/arm/tcg/helper-defs.h b/target/arm/tcg/helper-defs.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/helper-defs.h +++ b/target/arm/tcg/helper-defs.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_2(exception_pc_alignment, noreturn, env, vaddr) DEF_HELPER_1(setend, void, env) DEF_HELPER_2(wfi, void, env, i32) DEF_HELPER_1(wfe, void, env) -DEF_HELPER_2(wfit, void, env, i64) +DEF_HELPER_2(wfit, void, env, i32) DEF_HELPER_1(yield, void, env) DEF_HELPER_1(pre_hvc, void, env) DEF_HELPER_2(pre_smc, void, env, i32) diff --git a/target/arm/tcg/op_helper.c b/target/arm/tcg/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/op_helper.c +++ b/target/arm/tcg/op_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(wfi)(CPUARMState *env, uint32_t insn_len) env->regs[15] -= insn_len; } - raise_exception(env, excp, syn_wfx(1, 0xe, 0, insn_len == 2), + raise_exception(env, excp, syn_wfx(1, 0xe, 0, false, WFI, insn_len == 2), target_el); } @@ -XXX,XX +XXX,XX @@ void HELPER(wfi)(CPUARMState *env, uint32_t insn_len) #endif } -void HELPER(wfit)(CPUARMState *env, uint64_t timeout) +void HELPER(wfit)(CPUARMState *env, uint32_t rd) { #ifdef CONFIG_USER_ONLY /* @@ -XXX,XX +XXX,XX @@ void HELPER(wfit)(CPUARMState *env, uint64_t timeout) int target_el = check_wfx_trap(env, false, &excp); /* The WFIT should time out when CNTVCT_EL0 >= the specified value. */ uint64_t cntval = gt_get_countervalue(env); + uint64_t timeout = env->xregs[rd]; /* * We want the value that we would get if we read CNTVCT_EL0 from * the current exception level, so the direct_access offset, not @@ -XXX,XX +XXX,XX @@ void HELPER(wfit)(CPUARMState *env, uint64_t timeout) if (target_el) { env->pc -= 4; - raise_exception(env, excp, syn_wfx(1, 0xe, 2, false), target_el); + raise_exception(env, excp, syn_wfx(1, 0xe, rd, true, WFIT, false), target_el); } if (uadd64_overflow(timeout, offset, &nexttick)) { diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool trans_WFIT(DisasContext *s, arg_WFIT *a) } gen_a64_update_pc(s, 4); - gen_helper_wfit(tcg_env, cpu_reg(s, a->rd)); + gen_helper_wfit(tcg_env, tcg_constant_i32(a->rd)); /* Go back to the main loop to check for interrupts */ s->base.is_jmp = DISAS_EXIT; return true; -- 2.43.0